Algunas consideraciones acerca de los piercings orales Some considerations about oral piercings

OpenAIRE

I De Urbiola Alís; H Viñals Iglesias

2005-01-01

Desde la antigüedad se han venido realizando piercings intraorales con motivaciones muy diversas a lo largo de la historia. Actualmente es una moda que se ha generalizado en el mundo occidental. En este artículo se explican los distintos tipos de piercings intra y periorales, sus posibles localizaciones y las complicaciones derivadas de su uso. También se dan unas recomendaciones y unas pautas de tratamiento para los profesionales que deban atender a los pacientes portadores de piercings.Intr...

Tattoo, piercing, and adolescent tobacco consumption.

Science.gov (United States)

Guéguen, Nicolas

2013-01-01

Abstract The objective of the study was to evaluate the link between tattoos and/or piercings and young people's tobacco consumption. A total of 2587 students (1168 females and 1419 males) were asked about tattoos, piercings, and tobacco consumption. Young men and young girls who had tattoos and/or wore piercings were more likely to report smoking behavior, earlier smoking behavior, and higher cigarette consumption per day. It was also found that both with men and women, the combined effects of piercings and tattoos were associated with an increase in smoking behavior. Piercings and/or tattoos as well as combined piercings and tattoos appeared as markers of tobacco consumption. Such marks could serve as signs for educators, parents, and physicians.

Tattoos and piercings: bodily expressions of uniqueness?

Science.gov (United States)

Tiggemann, Marika; Hopkins, Louise A

2011-06-01

The study aimed to investigate the motivations underlying the body modification practices of tattooing and piercing. There were 80 participants recruited from an Australian music store, who provided descriptions of their tattoos and piercings and completed measures of need for uniqueness, appearance investment and distinctive appearance investment. It was found that tattooed individuals scored significantly higher on need for uniqueness than non-tattooed individuals. Further, individuals with conventional ear piercings scored significantly lower on need for uniqueness than individuals with no piercings or with facial and body piercings. Neither appearance investment nor distinctive appearance investment differed significantly among tattoo or piercing status groups. Strength of identification with music was significantly correlated with number of tattoos, but not number of piercings. It was concluded that tattooing, but not body piercing, represents a bodily expression of uniqueness. Copyright © 2011 Elsevier Ltd. All rights reserved.

Piercing of corporate veil of nuclear companies

International Nuclear Information System (INIS)

Frenz, Walter

2015-01-01

The Federal Ministry of Economics plans that the nuclear companies with all their assets to cover disposal costs can be used where a power plant operator is governed by its parent company, hence the latter Capital or voting majority of the operators holding or these passes; To date, the parent company is liable only limited and not more than five years after the end of the domination of one Subsidiary, oparating a power plant. In this way, prevents ultimately the public sector and thus the Taxpayers have to pay for the long-term consequences of the use of nuclear energy. Until now ensured paragraph 303 AktG a group law Secondary liability the parent companies of the operating company in the case of of termination of the control and profit transfer agreements is very limited for the nuclear liabilities, namely in two ways: The claim is only focused on the backup performance and not at the expense of acquisition and Moreover, according to the case law limited of five years after its foundation; for the area of transformation law comparable rules are valid. thereby the dismantling of a nuclear power station takes just already for 20 years and a final repository is expected before 2050 not be available. [de

Awareness of complications and maintenance mode of oral piercing in a group of adolescents and young Italian adults with intraoral piercing

Science.gov (United States)

Fusco, Francesca; Corridore, Denise; Ottolenghi, Livia

2015-01-01

Background The aim of the study was to focus the awareness of complications of oral piercing among a group of adolescents and young Italian adults with intraoral piercings. Material and Methods A total of 225 teenagers were asked to complete a questionnaire on the awareness of complications of oral piercing. An additional questionnaire was administered in case of oral piercing worn, based on site piercing, knowledge about piercer license, oral and systemic risks due to oral piercing, disinfection and sterilization of the material pierced, information by the piercer about piercing hygiene maintenance and post-piercing dentist check-up. After questionnaire all partecipants received a brochure with some information about risks and maintenance mode of piercing. Results Data revealed that more than 50% of teens surveyed was found to wear a piercing. Only 25.3% was aware of the risk of HCV cross-infection and only 17.3% reported of knowledge about risk of endocarditis. Only 17% checked the piercer license and only 18% sterilization and disinfection of the materials used. 53.7% did not received explanations about the risks associated with piercing. With regard to the maintenance mode of the piercing, it has been suggested to brush the piercing bar in 17% of cases. The post piercing specialist visits have been suggested only in 7% of cases. Conclusions The general lack of awareness of complications and maintenance mode related to oral piercing needs to be addressed by some education programs performed at school and by dentists. Key words: Oral piercing, oral health, oral complications. PMID:25858082

[Genital piercings: epidemiology, sociocultural aspects, sexuality and complications].

Science.gov (United States)

Kluger, Nicolas

2012-01-01

Body piercing has gained tremendous popularity since the mid nineties. Genital piercings constitute a peculiar variant of piercing due to its sensitive localization. Health care providers are often very little informed about those piercings. Besides, negative stereotypes are often attributed to the bearers of such piercings. This review focuses not only on the medical aspects of genital piercings but also on the social, cultural and psychological background that surround those piercings. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

[Piercings--what the physician needs to know?].

Science.gov (United States)

Kluger, Nicolas; Koljonen, Virve

2012-01-01

Body piercing (BP) is defined as penetration of jewellery through the skin. Along with tattooing BPs are the most common body modifications. Complications related to piercing are numerous. They can be acute or chronic, infectious or non infectious and local or systemic complications. Acute infections constitute the most important complications and occur independently of the piercing site. Special attention should be brought on oral piercings, as they are frequent and responsible for numerous complications. A non-judgmental approach is recommended, when a pierced patient seeks medical help for a piercing complication or any other health issue.

Do long-term tongue piercings affect speech quality?

Science.gov (United States)

Heinen, Esther; Birkholz, Peter; Willmes, Klaus; Neuschaefer-Rube, Christiane

2017-10-01

To explore possible effects of tongue piercing on perceived speech quality. Using a quasi-experimental design, we analyzed the effect of tongue piercing on speech in a perception experiment. Samples of spontaneous speech and read speech were recorded from 20 long-term pierced and 20 non-pierced individuals (10 males, 10 females each). The individuals having a tongue piercing were recorded with attached and removed piercing. The audio samples were blindly rated by 26 female and 20 male laypersons and by 5 female speech-language pathologists with regard to perceived speech quality along 5 dimensions: speech clarity, speech rate, prosody, rhythm and fluency. We found no statistically significant differences for any of the speech quality dimensions between the pierced and non-pierced individuals, neither for the read nor for the spontaneous speech. In addition, neither length nor position of piercing had a significant effect on speech quality. The removal of tongue piercings had no effects on speech performance either. Rating differences between laypersons and speech-language pathologists were not dependent on the presence of a tongue piercing. People are able to perfectly adapt their articulation to long-term tongue piercings such that their speech quality is not perceptually affected.

With Nipple Piercing

Directory of Open Access Journals (Sweden)

Mark D. Pearlman

1995-01-01

Full Text Available Background: Breast abscesses are typically seen in the setting of complicated mastitis in lactating women. Abscesses resulting from foreign bodies are not commonly seen in the breast. Over the past few decades, body piercing has become increasingly common, yet the infectious morbidity resulting from it is not well recognized. A breast abscess associated with nipple piercing is described in this report.

Perceptions of visible piercings: a pilot study.

Science.gov (United States)

Martino, Sara; Lester, David

2011-12-01

49 undergraduates were shown pictures of a man and a woman with piercings and with no piercings. The pierced model was judged to be less attractive and less normal than the nonpierced model. The pierced model was perceived as less intelligent, caring, generous, honest, and religious but more artistic and mysterious.

Oral and perioral piercings in Tshwane.

Science.gov (United States)

Ebrahim, R; Naidoo, S

2008-06-01

Oral and perioral piercings have recently become very popular and many patients present at dental clinics and practices with jewellery inserted into the oral and perioral tissues. It is imperative that oral health care professionals become familiar with this practice, become aware of its sequelae, and are able to provide oral health education regarding oral hygiene and care of the piercing. The present study investigated the sites of oral piercings, complications associated with piercings, plaque control procedures practised by piercees, and the attitude and behaviour of piercers towards infection control and prevention of complications after a piercing. A convenience sample was used and 126 piercees and 10 piercers completed a self-administered questionnaire. Of the 126 participants (107 females and 19 males), 88.10% had a tongue piercing, 19.84% had a lip piercing and 7.94% had both. The most common immediate post-procedure sequelae were pain (69.05%), swelling (52.38%) and difficulty eating, speaking and swallowing (70.63%). Long-term complications were reported by 17.56% of the sample, and included chipping of teeth, gingival recession, lesions on the tongue and palate, painful gums, and sensitivity of teeth. Oral health professionals need to be aware of the risk of damage to soft and hard tissue, and their role in informing patients about the potential risks, if consulted before a piercing.

Is chronic nipple piercing associated with hyperprolactinemia?

Science.gov (United States)

Sun, Grace E Ching; Pantalone, Kevin M; Gupta, Manjula; Kennedy, Laurence; Nasr, Christian; Constantiner, Marigel; Hamrahian, Amir H; Hatipoglu, Betul

2013-09-01

Literature on hyperprolactinemia in the setting of a nipple piercing is limited to individuals with concomitant breast/chest wall infection. It is unclear if chronic nipple stimulation from a piercing alone can cause sustained elevations of serum prolactin. Nipple piercing is emerging as a more mainstream societal form of body art, and the answer to this clinical question would potentially alter patient management. Our aim was to assess serum prolactin levels in subjects with nipple piercing. Inclusion criteria were as follows: men and women ≥ 18 years old with nipple piercing(s) present > 6 months. Exclusion criteria included: women who are pregnant, lactating or men and eight women were enrolled. Median (range) ages for men and women were 33 (24-42) and 27 years (23-42), respectively. All except one subject had bilateral piercings. The median interval from nipple piercing to blood draw was 4.0 (2.0-12.0) years. None of the subjects had hyperprolactinemia. Median (range) prolactin levels for men and women were 5.6 ng/mL (3.8-7.4) and 8.0 ng/mL (2.8-10.9), respectively. Our results suggest that in the absence of any concomitant infection, chronic nipple piercing is not associated with hyperprolactinemia.

Genital piercings: what is known and what people with genital piercings tell us.

Science.gov (United States)

Armstrong, Myrna L; Caliendo, Carol; Roberts, Alden E

2006-06-01

General and subjective information about those who chose to obtain genital piercings was presented. Particularly, the assumptions made from the literature are refuted by objective and subjective data collected from intimately pierced individuals themselves. Professional nurses must not base practice decisions on assumptions but on the "best evidence with clinical experience, research, (as well as) associated patient values" (Sackett, Strauss, Richardson, Rosenberg, & Haynes, 2001, p. 10). Thus, providing clinically competent care is driven by the latest knowledge and evidence from research and patient sources. Data found here provide further empirical evidence that may help to improve client outcomes by advancing evidence-based nursing practice in relation to people with genital piercings.

Piercing and Tattoos - Multiple Languages

Science.gov (United States)

... Are Here: Home → Multiple Languages → All Health Topics → Piercing and Tattoos URL of this page: https://medlineplus. ... V W XYZ List of All Topics All Piercing and Tattoos - Multiple Languages To use the sharing ...

Body piercing: complications and prevention of health risks.

Science.gov (United States)

Holbrook, Jaimee; Minocha, Julia; Laumann, Anne

2012-02-01

Body and earlobe piercing are common practices in the USA today. Minor complications including infection and bleeding occur frequently and, although rare, major complications have been reported. Healthcare professionals should be cognizant of the medical consequences of body piercing. Complications vary depending on the body-piercing site, materials used, experience of the practitioner, hygiene regimens, and aftercare by the recipient. Localized infections are common. Systemic infections such as viral hepatitis and toxic shock syndrome and distant infections such as endocarditis and brain abscesses have been reported. Other general complications include allergic contact dermatitis (e.g. from nickel or latex), bleeding, scarring and keloid formation, nerve damage, and interference with medical procedures such as intubation and blood/organ donation. Site-specific complications have been reported. Oral piercings may lead to difficulty speaking and eating, excessive salivation, and dental problems. Oral and nasal piercings may be aspirated or become embedded, requiring surgical removal. Piercing tracts in the ear, nipple, and navel are prone to tearing. Galactorrhea may be caused by stimulation from a nipple piercing. Genital piercings may lead to infertility secondary to infection, and obstruction of the urethra secondary to scar formation. In men, priapism and fistula formation may occur. Women who are pregnant or breastfeeding and have a piercing or are considering obtaining one need to be aware of the rare complications that may affect them or their child. Though not a 'complication' per se, many studies have reported body piercing as a marker for high-risk behavior, psychopathologic symptoms, and anti-social personality traits. When it comes to piercing complications, prevention is the key. Body piercers should take a complete medical and social history to identify conditions that may predispose an individual to complications, and candidates should choose a

Oral piercings among first-year university students.

Science.gov (United States)

Ventä, Irja; Lakoma, Ani; Haahtela, Sauli; Peltola, Jaakko; Ylipaavalniemi, Pekka; Turtola, Lauri

2005-05-01

The aim of the study was to examine oral piercings among first-year university students. First-year university students in 2002 were invited to a dental examination (n = 234; 49 men and 185 women). Students with piercings formed the study group and the rest served as controls. The methods included decayed, missing, and filled teeth (DMF) index, stimulated salivary flow rates, panoramic tomograms, and questionnaires including the Depression Inventory of Beck. Fisher's 2-sided exact test was used for statistical analysis. The prevalence of oral piercings was 3.4%. In the DMF indices, no statistically significant differences existed between the groups. Increased salivary flow rates were noted among students with piercings (63% vs 26%, P piercings is essential.

Oral piercings: immediate and late complications.

Science.gov (United States)

Vieira, Elma P; Ribeiro, Andre Luis Ribeiro; Pinheiro, João de Jesus V; Alves, Sérgio de M

2011-12-01

Oral piercings have a long history as part of religious, cultural, or sexual symbolism in many traditional tribes; currently, these ornaments have wide acceptance among young people. Several oral and systemic complications may be associated with this practice; however, limited data related to these complications can be obtained in the literature. This study includes 42 cases of oral piercings in 39 young adults, who were using or had used oral piercings, and the complications associated with their use. Immediate complications occurred in 29 cases, including excessive bleeding (69%) and pain (52.3%) as the most representative. Two cases of syncope were found. Late complications related to the piercing insertion site were observed in 97.6% of cases, with pain and swelling being present in 92.9% and 61.9% of cases, respectively. Dental pain and lacerations on the tongue represented the most prevalent complications associated with the surrounding tissues, accounting for 33.3% and 31% of cases. The use of oral piercings is related to a series of mainly local complications, and individuals who decide to use piercings should be aware of such complications. Individuals wishing to get a part of their body pierced should do so with qualified professionals and should regularly visit the dentist so that a regular control is achieved, thus ensuring the early detection of the adverse effects associated with this practice. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Intimate body piercings in women

NARCIS (Netherlands)

van der Meer, G. T.; Schultz, W. C. M. Weijmar; Nijman, J. M.

2008-01-01

The popularity of (intimate) body piercing has increased as well as the chances of being confronted with (the complications) of it. This article provides information about the various types of intimate body piercings in women, the complications and concerns regarding the treatment of patients with

Pierce electrodes for a multigap accelerating system

International Nuclear Information System (INIS)

Davydenko, V.I.; Ivanov, A.A.; Kotelnikov, I.A.; Tiunov, M.A.

2007-01-01

A well-known Pierce's solution that allows to focus a beam of charged particles using properly shaped electrodes outside the beam is generalized to the case of multigap accelerating system. Simple parametric formulae for Pierce electrodes are derived for an accelerating system with current density, limited either by space charge or by emitting property of the cathode. As an example of general approach, Pierce electrodes shape is analyzed for a system with two accelerating gaps. It is shown that precise Pierce's solution exists if acceleration rate within second gap is lower than within first gap. In the opposite case quasi-Pierce solution can be implemented using non-equipotential electrode between the gaps, and guidelines, based on numerical simulations, for the design of equipotential focusing electrodes are given

Pericondrite pós-piercing Post-piercing perichondritis

Directory of Open Access Journals (Sweden)

André de Paula Fernandez

2008-12-01

Full Text Available O uso de piercing tem se tornado uma prática muito freqüente entre os jovens. O procedimento na maioria vezes realizado por profissionais não-qualificados não é isento de riscos. O manuseio de material contaminado ou a higiene imprópria predispõem à pericondrite e à celulite. A pericondrite caracteriza-se pelo eritema do pavilhão auricular, dor intensa e febre. Sem tratamento, desenvolve-se um edema generalizado do pavilhão com formação de abscesso subpericondrial, podendo evoluir para necrose isquêmica da cartilagem e a temível deformidade estética conhecida como "orelha em couve flor". O agente responsável mais encontrado é o Pseudomonas aeruginosa. No estágio inicial da doença o tratamento pode ser feito com antibióticos de amplo espectro. Nos casos em que o abscesso está presente, a incisão e drenagem cirúrgica são obrigatórios acompanhado de antibioticoterapia guiado pela cultura e antibiograma. OBJETIVO: O objetivo deste relato de caso é realizar uma revisão bibliográfica dos últimos 10 anos abordando os aspectos anatômicos do pavilhão auricular, a história do uso de piercing e suas mais conhecidas complicações. MÉTODO: Relato de um caso de pericondrite pós-piercing transcartilaginoso onde houve a necessidade de tratamento cirúrgico com praticamente nenhuma deformidade estética. RESULTADO: Aquisição de experiência teórico-prática através de revisão bibliográfica e relato de um caso de evolução favorável para a paciente. CONCLUSÃO: Incidência crescente das complicações de pericondrites na população jovem deve levar à prevenção primária mais elaborada.Piercing has become more and more popular among adolescents. The procedure is generally performed by unqualified professionals and carries its risk. Non-sterilized material or inappropiate hygiene increases the possibility of perichondritis and celulitis. The disease is characterized by erythema of the auricula pinna, unbearable pain

Intimate body piercings in women.

Science.gov (United States)

van der Meer, G T; Schultz, W C M Weijmar; Nijman, J M

2008-12-01

The popularity of (intimate) body piercing has increased as well as the chances of being confronted with (the complications) of it. This article provides information about the various types of intimate body piercings in women, the complications and concerns regarding the treatment of patients with intimate bodypiercings.

Diagrammer hos Pierce og Deleuze

DEFF Research Database (Denmark)

Busk, Malene

2006-01-01

Artiklen omhandler to forskellige begreber om diagrammet, nemlig Pierces og Deleuzes. De definerer udfra to meget forskellige udgangspukter begge diagrammet som kreativt redskab......Artiklen omhandler to forskellige begreber om diagrammet, nemlig Pierces og Deleuzes. De definerer udfra to meget forskellige udgangspukter begge diagrammet som kreativt redskab...

Self-piercing riveting properties, processes and applications

CERN Document Server

Chrysanthou, A

2014-01-01

Due to its speed, low energy requirements, and the fact that it does not require a pre-drilled hole, the technique of self-piercing riveting (SPR) has been increasingly adopted by many industries as a high-speed mechanical fastening technique for the joining of sheet material components. Self-piercing riveting comprehensively reviews the process, equipment, and corrosion behaviour of self-piercing riveting, and also describes the process of evaluation and modelling of strength of self-piercing riveted joints, quality control methods and non-destructive testing.Part one provides an exte

Post-piercing perichondritis.

Science.gov (United States)

Fernandez, André de Paula; Castro Neto, Ivan de; Anias, Christiane Ribeiro; Pinto, Patrícia Ciminelli Linhares; Castro, Jair de Carvalho E; Carpes, Arturo Frick

2008-01-01

Piercing has become more and more popular among adolescents. The procedure is generally performed by unqualified professionals and carries its risk. Non-sterilized material or inappropiate hygiene increases the possibility of perichondritis and celulitis. The disease is characterized by erythema of the auricula pinna, unbearable pain and fever. Left untreated, the condition progresses with edema along the auricula and abscess formation that may result in ischemic necrosis and a cauliflower anesthetic deformation. The most common bacteria is Pseudomonas aeruginosa. In cases with abscesses, drainage is necessary along with antibiotic therapy guided by cultures and antibiogram. The aim of this case report was to review the past 10 years of published papers dealing with anatomical aspects of the auricular pinna, the history of piercing and its most common complications. A case report of perichondritis after 'high' ear piercing that required surgical treatment and that progressed with no esthetic loss. Theoretical and practical experience based on a review and a report of a case that progressed satisfactorily. The increased incidence of perichondritis in adolescents should require more elaborated primary prevention measures.

[Tattoos and piercings in adolescents: family conflicts and temperament].

Science.gov (United States)

Bosello, Romina; Favaro, Angela; Zanetti, Tatiana; Soave, Manuela; Vidotto, Giulio; Huon, Gail; Santonastaso, Paolo

2010-01-01

The phenomenon of body art, such as tattoos and piercings, has ancient roots, rediscovered in Western society during the '70s. The aim of this research is to investigate the prevalence and the characteristics of tattoos and piercings among Italian adolescents of high school in Padua, with particular attention to family context and temperament. Some questionnaires about the presence or the wish of tattoos/piercings, smoke and alcohol use, familiar conflicts, and some temperamental features, such as novelty seeking, harm avoidance and reward dependence, have been administered to a sample of 829 students. Tattoo and piercing's prevalence among adolescents was respectively 4% and 24%; 2.5% of the sample had both. Respectively 62% and 35% of the subjects expressed the desire of having a tattoo or piercing. A significant association has been found between tattoo/piercing's presence and smoke and alcohol use (p tattoos and piercings, are more likely to have familiar conflicts and minor perceived support and they have higher scores on the novelty seeking scale. Those who wish a tattoo/piercing showed higher reward dependence. This study confirms that tattoos/piercings are common among young people and it stresses the relevance of familiar and temperamental features, and the association between tattoos/piercings and some maladaptive behaviors, like smoke and alcohol use.

[Piercings. A new demand for nursing].

Science.gov (United States)

Lastra Félix, Marcos

2004-03-01

The new legal regulations and agreements dealing with the type of locales and personnel authorized to implant body rings through pierced holes known popularly as piercings brings with it the need for nurses to learn about this practice and to adapt our habitual sanitary techniques, in an urgent manner, in order to cover the increasing aesthetic demand. The nursing profession needs to amplify its range of treatments for this piercing practice so it is not limited to merely inserting rings or studs in holes.

Dental and oral complications of lip and tongue piercings.

Science.gov (United States)

De Moor, R J G; De Witte, A M J C; Delmé, K I M; De Bruyne, M A A; Hommez, G M G; Goyvaerts, D

2005-10-22

Piercing of the tongue and perioral regions is an increasingly popular expression of body art, with more patients coming in for a routine check-up with tongue and/or lip piercings. Several complications of oral piercing have been reported, some of which are life-threatening. In the present clinical survey the prevalence of both tongue and lip piercing complications in oral health was assessed in a group of 50 patients. The most common dental problem registered was chipping of the teeth, especially in association with tongue piercing. Gingival recession was seen as a result of lip piercing with studs. Post-procedural complications included oedema, haemorrhage and infection. Therefore, dentists and oral and maxillofacial surgeons should be given more authority to advise patients with oral and facial piercings or those who plan to acquire this type of body art.

Body adornment: piercings and tattoos.

Science.gov (United States)

Chivers, Lesley

Body adornment through tattoos and piercings is on the increase, making adverse side effects more common. Practitioners should be prepared to give advice, either before the event, or post-procedure in written and oral forms. The aim of this article is to inform practitioners of the sites and types of piercings, likely adverse side effects and estimated healing times.

Revised theory of Pierce-type electron guns

International Nuclear Information System (INIS)

Sar-El, H.Z.

1982-01-01

Attempts to date to obtain the shape of the beam forming electrodes of various Pierce-type electron guns are briefly discussed with emphasis on the many discrepansis in the results of previous works. A revised theory of Pierce-type electron guns is proposed. The shapes of the beam-forming electrodes for all known configurations of Pierce guns were computed on the basis of the proposed theory. (orig.)

[Cutaneous adverse reactions to tattoos and piercings].

Science.gov (United States)

Mataix, J; Silvestre, J F

2009-10-01

Piercings and tattoos have become very popular in western society in recent decades, particularly among younger generations. Reports of medical complications associated with these decorative techniques have increased in parallel with the rise in their popularity. Due to their high frequency, adverse cutaneous reactions are particularly important among these potential complications. Tattoo-related complications include a number of cutaneous and systemic infections secondary to breach of the epidermal barrier, acute and delayed inflammatory reactions with different histopathological patterns, the appearance of benign and malignant tumors on tattooed areas of skin, and certain dermatoses triggered by isomorphic phenomena. Piercing-related complications are similar, though some, such as pyogenic skin infections, are much more common due to the delayed wound healing after piercing in certain sites. We must differentiate between complications that are independent of the site of piercing, and specific complications, which are closely related to the body area pierced. The rate of complications after performing piercings or tattoos depends on the experience of the artist, the hygiene techniques applied, and the postprocedural care by the customer. However, some of these complications are unpredictable and depend on factors intrinsic to the patient. In this article, we review the most common decorative techniques of body art, with particular focus on the potential cutaneous complications and their management.

Why Leading Consumer Product Companies Develop Proactive Chemical Management Strategies

Science.gov (United States)

Scruggs, Caroline E.; Van Buren, Harry J.

2014-01-01

Scholars have studied the various pressures that companies face related to socially responsible behavior when stakeholders know the particular social issues under consideration. Many have examined social responsibility in the context of environmental responsibility and the general approaches companies take regarding environmental management. The issue of currently unregulated, but potentially hazardous, chemicals in consumer products is not well understood by the general public, but a number of proactive consumer product companies have voluntarily adopted strategies to minimize use of such chemicals. These companies are exceeding regulatory requirements by restricting from their products chemicals that could harm human or environmental health, despite the fact that these actions are costly. They do not usually advertise the details of their strategies to end consumers. This article uses interviews with senior environmental directors of 20 multinational consumer product companies to investigate why these companies engage in voluntary chemicals management. The authors conclude that the most significant reasons are to achieve a competitive advantage and stay ahead of regulations, manage relationships and maintain legitimacy with stakeholders, and put managerial values into practice. Many of the characteristics related to the case of chemicals management are extendable to other areas of stakeholder management in which risks to stakeholders are either unknown or poorly understood. PMID:27471326

Why Leading Consumer Product Companies Develop Proactive Chemical Management Strategies.

Science.gov (United States)

Scruggs, Caroline E; Van Buren, Harry J

2016-05-01

Scholars have studied the various pressures that companies face related to socially responsible behavior when stakeholders know the particular social issues under consideration. Many have examined social responsibility in the context of environmental responsibility and the general approaches companies take regarding environmental management. The issue of currently unregulated, but potentially hazardous, chemicals in consumer products is not well understood by the general public, but a number of proactive consumer product companies have voluntarily adopted strategies to minimize use of such chemicals. These companies are exceeding regulatory requirements by restricting from their products chemicals that could harm human or environmental health, despite the fact that these actions are costly. They do not usually advertise the details of their strategies to end consumers. This article uses interviews with senior environmental directors of 20 multinational consumer product companies to investigate why these companies engage in voluntary chemicals management. The authors conclude that the most significant reasons are to achieve a competitive advantage and stay ahead of regulations, manage relationships and maintain legitimacy with stakeholders, and put managerial values into practice. Many of the characteristics related to the case of chemicals management are extendable to other areas of stakeholder management in which risks to stakeholders are either unknown or poorly understood.

Management of Retained Genital Piercings: A Case Report and Review

Directory of Open Access Journals (Sweden)

Laura J. Moulton

2017-01-01

Full Text Available The prevalence of genital piercing among women is increasing. As the popularity increases, the number of complications from infection, injury, and retained jewelry is likely to rise. Techniques to remove embedded jewelry are not well described in the literature. The purpose of this report was to describe a case of a patient with a retained clitoral glans piercing, discuss a simple technique for outpatient removal, and review current evidence regarding associated risks of clitoral piercings. A 24-year-old female presented to the emergency department with an embedded clitoral glans piercing. Local anesthetic was injected into the periclitoral skin and a small superficial vertical incision was made to remove the ball of the retained barbell safely. In conclusion, among patients with retained genital piercing, outpatient removal of embedded jewelry is feasible. While the practice of female genital piercing is not regulated, piercing of the glans of the clitoris is associated with increased injury to the nerves and blood supply of the clitoris structures leading to future fibrosis and diminished function compared to piercing of the clitoral hood.

Management of Retained Genital Piercings: A Case Report and Review.

Science.gov (United States)

Moulton, Laura J; Jernigan, Amelia M

2017-01-01

The prevalence of genital piercing among women is increasing. As the popularity increases, the number of complications from infection, injury, and retained jewelry is likely to rise. Techniques to remove embedded jewelry are not well described in the literature. The purpose of this report was to describe a case of a patient with a retained clitoral glans piercing, discuss a simple technique for outpatient removal, and review current evidence regarding associated risks of clitoral piercings. A 24-year-old female presented to the emergency department with an embedded clitoral glans piercing. Local anesthetic was injected into the periclitoral skin and a small superficial vertical incision was made to remove the ball of the retained barbell safely. In conclusion, among patients with retained genital piercing, outpatient removal of embedded jewelry is feasible. While the practice of female genital piercing is not regulated, piercing of the glans of the clitoris is associated with increased injury to the nerves and blood supply of the clitoris structures leading to future fibrosis and diminished function compared to piercing of the clitoral hood.

Piercing by composite electrode tool

International Nuclear Information System (INIS)

Abdukarimov, Eh.T.; Krakov, B.G.; Saidinov, S.Ya.

1990-01-01

The construction of the electrode consisting of a dielectric shell, where a working liquid enters, and a metal rod is designed for precision super-deep piercing by the electroerosion treatment method. Technological parameters of piercing with small diameter (0.5-1.9 mm) for 12Kh18N10T steel, copper and tungsten are presented. A possibility to use a new tool for treating components of any form and sizes is marked

Drawing Euler Diagrams with Circles: The Theory of Piercings.

Science.gov (United States)

Stapleton, Gem; Leishi Zhang; Howse, John; Rodgers, Peter

2011-07-01

Euler diagrams are effective tools for visualizing set intersections. They have a large number of application areas ranging from statistical data analysis to software engineering. However, the automated generation of Euler diagrams has never been easy: given an abstract description of a required Euler diagram, it is computationally expensive to generate the diagram. Moreover, the generated diagrams represent sets by polygons, sometimes with quite irregular shapes that make the diagrams less comprehensible. In this paper, we address these two issues by developing the theory of piercings, where we define single piercing curves and double piercing curves. We prove that if a diagram can be built inductively by successively adding piercing curves under certain constraints, then it can be drawn with circles, which are more esthetically pleasing than arbitrary polygons. The theory of piercings is developed at the abstract level. In addition, we present a Java implementation that, given an inductively pierced abstract description, generates an Euler diagram consisting only of circles within polynomial time.

Self-reported characteristics of women and men with intimate body piercings.

Science.gov (United States)

Caliendo, Carol; Armstrong, Myrna L; Roberts, Alden E

2005-03-01

The purpose of this paper is to report the findings of a study exploring factors associated with female and male intimate body piercing, with particular emphasis on health issues. Nipple and genital piercings (intimate piercings) have become common types of body art. Scant medical and nursing literature is available, leading to little understanding of these body modifications by health care providers. A convenience sample of intimately pierced individuals (63 women and 83 men) from 29 states in the United States of America was surveyed via an author-developed questionnaire. Questions focused on demographic characteristics, decision factors and health problems related to intimate piercings. Self-reported characteristics were compared between female and male participants, and participants were compared demographically to United States general population. Participants reported wearing nipple piercings (43%), genital piercings (25%) and both types (32%). Respondents were significantly younger, less ethnically diverse, better educated, less likely to be married, more often homosexual or bisexual and they initiated sexual activity at a younger age than the US population. Deliberate, individual decisions for procurement of the intimate piercings were made. Average purchase consideration was at age 25 (nipple) and 27 (genital); average age to obtain the piercing was 27 (nipple) and 28 (genital) years. Purposes for obtaining the piercings included uniqueness, self-expression and sexual expression. Most participants still liked their piercing (73-90%). Health concerns related to intimate piercings were described by both those with nipple piercings (66%) and with genital piercings (52%) and included site sensitivity, skin irritation, infection and change in urinary flow (male genital). Few STDs (3%) were reported and no HIV or hepatitis. Usually non-medical advice was sought for problems -- often from the body piercer. Understanding client rationale is not a necessary

77 FR 7613 - Dow Chemical Company; Dow Chemical TRIGA Research Reactor; Facility Operating License No. R-108

Science.gov (United States)

2012-02-13

... NUCLEAR REGULATORY COMMISSION [Docket No. 50-264; NRC-2012-0026] Dow Chemical Company; Dow Chemical TRIGA Research Reactor; Facility Operating License No. R-108 AGENCY: Nuclear Regulatory Commission... Facility Operating License No. R-108 (``Application''), which currently authorizes the Dow Chemical Company...

Trends and complications of ear piercing among selected Nigerian population

Directory of Open Access Journals (Sweden)

Olajide Toye Gabriel

2017-01-01

Full Text Available Background: The reported health and socioeconomic consequences of ear piercing, especially in modern day society, underscore the need to further research into this subject. In this study, we determine the trends and complications of ear piercing among selected Nigerian population. Aim and Objectives: The aim and objective of this study was to draw attention to the trends and complications of ear piercing with a view to prevent its associated complications. Methodology: It is a descriptive cross-sectional study carried out between February and May 2015 among selected Nigerian population from two of its six geo-political zones. A self-administered semi-structured questionnaire which had been pretested was used to collect data from 458 respondents who consented using multistage sampling technique. Results: Of 480 respondents enumerated, 458 completed the questionnaires and gave their biodata. The male:female ratio was 1:6.2. Their ages ranged from 18 to 75 years with a mean of 35.56 ± 10.16. About 35.4% of the respondents were within the age group of 31–40 years. Majority of the respondents, i.e.,79.3% practiced ear piercing on their children. Most of them (86.8% preferred single piercing. Ear piercing was performed within the 1st week of birth in 37.2% of the respondents. Large percentage (93.2% of the respondents will not encourage ear piercing in male children. Nearly 20.5% of the respondents observed complications. Conclusion: Ear piercing remained a common practice in Nigeria, with respondents preferring it on females. Majority of the piercings are done in childhood and by untrained personnel. Keloid formation was the notable complication observed by the respondents. There is a need to increase awareness about the hazards of ear piercings and to enact laws that regulate ear piercings particularly in children which is hereby stretched.

Intraurethral condylomata acuminata associated with genital piercings.

Science.gov (United States)

Takahashi, S; Hirano, Y; Kawamura, T; Homma, Y

2013-01-01

A 33-year-old man was referred to our institution with papillary masses at the urethral meatus and difficulty urinating. Genital examination showed two piercings on the frenulum, which were penetrating the external urethra. Endoscopic examination revealed papillary tumours over the entire circumference of the penile urethra and the piercing site. The tumours were resected transurethrally. Microscopic examination revealed condylomata acuminata. Human papillomavirus types 6 and 66 were detected in the lesions. Retrograde urethral viral infection is rare because of the protection provided by the mucosal immune system. Genital piercing may have facilitated spread of the human papillomavirus into the urethra.

Pierce instability and bifurcating equilibria

International Nuclear Information System (INIS)

Godfrey, B.B.

1981-01-01

The report investigates the connection between equilibrium bifurcations and occurrence of the Pierce instability. Electrons flowing from one ground plane to a second through an ion background possess a countable infinity of static equilibria, of which only one is uniform and force-free. Degeneracy of the uniform and simplest non-uniform equilibria at a certain ground plan separation marks the onset of the Pierce instability, based on a newly derived dispersion relation appropriate to all the equilibria. For large ground plane separations the uniform equilibrium is unstable and the non-uniform equilibrium is stable, the reverse of their stability properties at small separations. Onset of the Pierce instability at the first bifurcation of equilibria persists in more complicated geometries, providing a general criterion for marginal stability. It seems probable that bifurcation analysis can be a useful tool in the overall study of stable beam generation in diodes and transport in finite cavities

Piercings in medical students and their effects on the skin.

Science.gov (United States)

Purim, Kátia Sheylla Malta; Rosario, Bernardo Augusto; Rosario, Cristine Secco; Guimarães, Ana Tereza Bittencourt

2014-01-01

Piercings are body embellishments commonly seen in young people, however their inherent risk of infection and scarring disorders are less divulged. To evaluate the prevalence of body piercings among medical students and their possible dermatologic consequences. Cross-sectional study with 58 medical students, by means of a structured questionnaire covering socio-demographic characteristics, technical issues related to the piercing and characteristics of the dermatologic complications. The sample was predominantly female (86.2%), with mean age 24 ± 3 years. The placement of the first piercing occurred during adolescence (median age 15), without medical supervision (91.4%) or knowledge of parents/guardians (74%). Most piercings were made of metal alloy/stainless steel, in a dumbbell model (51.7%), inserted in the umbilical area (53.5%) or ear (41.4%), with frequent cutaneous reactions in the first six months post-piercing. Hypertrophic scarring, pain, swelling and infection (ppiercings. Piercing insertion occurred during adolescence. Local inflammatory and infectious reactions were common. Scarring disorders and dermatitis appeared in the long term. There is need for preventive and educational activities, starting with those in the academic environment.

Self-piercing riveting - a review

OpenAIRE

Li, Dezhi; Chrysanthou, Andreas; Patel, Imran; Williams, Geraint J.

2017-01-01

Self-piercing riveting (SPR) is a cold mechanical joining process used to join two or more sheets of materials by driving a rivet piercing through the top sheet or the top and middle sheets and subsequently lock into the bottom sheet under the guidance of a suitable die. SPR is currently the main joining method for aluminium and mixed-material lightweight automotive structures. SPR was originated half century ago, but it only had significant progress in the last 25 years due to the requiremen...

Pierce Lumber, Inc.

Science.gov (United States)

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

Proximity to citrus influences Pierce's disease in Temecula Valley vineyards

OpenAIRE

Perring, Thomas M.; Farrar, Charles A.; Blua, Matthew

2001-01-01

Pierce's disease has caused extensive losses to grapes in the Temecula Valley. The primary vector of Pierce's disease in the region is the glassy-winged sharpshooter (GWSS), which has been found in large numbers in citrus trees. We examined the role of citrus in the Temecula Valley Pierce's disease epidemic and found that citrus groves have influenced the incidence and severity of Pierce's disease in grapes. Because GWSS inhabit citrus in large numbers, California grape growers should take ad...

Religious belief and practice in attitudes toward individuals with body piercing.

Science.gov (United States)

Koch, Jerome R; Roberts, Alden E; Armstrong, Myrna L; Owen, Donna C

2004-10-01

Some research suggests adorning the body with tattoos or piercing jewelry is normative. Survey data were gathered from 450 undergraduates (72% female; 80% Euro-American; 63% freshmen and sophomores). Correlations between an index of respondents' religious belief and practice and their attitudes toward individuals who had more body piercings were weak if piercings were 7 or more, including piercings of the nipples and genitals. As religiosity is a carrier of normative behavior, individuals who have body piercings may be viewed as behaving within cultural norms.

Tattoos and body piercings as indicators of adolescent risk-taking behaviors.

Science.gov (United States)

Carroll, Sean T; Riffenburgh, Robert H; Roberts, Timothy A; Myhre, Elizabeth B

2002-06-01

This study assessed tattoos and body piercings as markers of risk-taking behaviors in adolescents. A 58-question survey, based on the 1997 Centers for Disease Control and Prevention Youth Risk Behavior Survey, was offered to all adolescent beneficiaries that came to the Adolescent Clinic. The survey contained standard Youth Risk Behavior Survey questions that inquire about eating behavior, violence, drug abuse, sexual behavior, and suicide. Questions about tattoos and body piercings were added for the purposes of this study. Participants with tattoos and/or body piercings were more likely to have engaged in risk-taking behaviors and at greater degrees of involvement than those without either. These included disordered eating behavior, gateway drug use, hard drug use, sexual activity, and suicide. Violence was associated with males having tattoos and with females having body piercings. Gateway drug use was associated with younger age of both tattooing and body piercing. Hard drug use was associated with number of body piercings. Suicide was associated with females having tattoos and younger age of both tattooing and body piercing. Tattoos and body piercings were found to be more common in females than males. Tattoos and/or body piercings can alert practitioners to the possibility of other risk-taking behaviors in adolescents, leading to preventive measures, including counseling. Tattoo and body piercing discovery should be an important part of a health maintenance visit to best direct adolescent medical care.

Piercings in medical students and their effects on the skin*

Science.gov (United States)

Purim, Kátia Sheylla Malta; Rosario, Bernardo Augusto; Rosario, Cristine Secco; Guimarães, Ana Tereza Bittencourt

2014-01-01

BACKGROUND Piercings are body embellishments commonly seen in young people, however their inherent risk of infection and scarring disorders are less divulged. OBJECTIVE To evaluate the prevalence of body piercings among medical students and their possible dermatologic consequences. METHODS Cross-sectional study with 58 medical students, by means of a structured questionnaire covering socio-demographic characteristics, technical issues related to the piercing and characteristics of the dermatologic complications. RESULTS The sample was predominantly female (86.2%), with mean age 24 ± 3 years. The placement of the first piercing occurred during adolescence (median age 15), without medical supervision (91.4%) or knowledge of parents/guardians (74%). Most piercings were made of metal alloy/stainless steel, in a dumbbell model (51.7%), inserted in the umbilical area (53.5%) or ear (41.4%), with frequent cutaneous reactions in the first six months post-piercing. Hypertrophic scarring, pain, swelling and infection (ppiercings. CONCLUSION Piercing insertion occurred during adolescence. Local inflammatory and infectious reactions were common. Scarring disorders and dermatitis appeared in the long term. There is need for preventive and educational activities, starting with those in the academic environment. PMID:25387495

Julianne Pierce VNS Matrix / Julianne Pierce ; interv. Tilman Baumgärtel

Index Scriptorium Estoniae

Pierce, Julianne

2006-01-01

Intervjuu austraalia kunstniku Julianne Pierce'iga, kes koos Josephine Starrsi, Francesca da Rimini ja Virginia Barretiga lõi 1991. a. Sydney's naiskunstirühmituse VNS Matrix ning kirjutas "21. sajandi küberfeministliku manifesti". Rühmituse töödest

Chemical Risk Assessment Screening Tool of a Global Chemical Company

OpenAIRE

Evelyn Tjoe-Nij; Christophe Rochin; Nathalie Berne; Alessandro Sassi; Antoine Leplay

2018-01-01

Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES), developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL) or occupational exposure band (OEB). The inhalation exposure i...

Adverse consequences of tattoos and body piercings.

Science.gov (United States)

Larzo, Melissa R; Poe, Susannah Grimm

2006-03-01

Body piercings and tattoos are becoming more common in the adolescent population today. Despite their movement into mainstream society, literature to aid in counseling of teens about these issues is scant. The practitioner dealing with this population of patients must be armed with the information necessary that will help adolescents make informed decisions about tattoos and piercings.

In Vitro Adherence of Oral Bacteria to Different Types of Tongue Piercings.

Science.gov (United States)

Borges, Lucas Pereira; Ferreira-Filho, Julio Cesar Campos; Martins, Julia Medeiros; Alves, Caroline Vieira; Santiago, Bianca Marques; Valença, Ana Maria Gondim

2016-01-01

The purpose of this work was to verify in vitro adherence of E. corrodens and S. oralis to the surface of tongue piercings made of surgical steel, titanium, Bioplast, and Teflon. For this, 160 piercings were used for the count of Colony Forming Units (CFU) and 32 piercings for analysis under scanning electron microscopy. Of these, 96 (24 of each type) were individually incubated in 5 mL of BHI broth and 50  μ L of inoculum at 37°C/24 h. The other 96 piercings formed the control group and were individually incubated in 5 mL of BHI broth at 37°C/24 h. Plates were incubated at 37°C/48 h for counting of CFU/mL and data were submitted to statistical analysis ( p value piercings, showing lower colonization ( p piercings. The four types of piercings were susceptible to colonization by E. corrodens and S. oralis , and bacterial adhesion was more significant in those made of Bioplast and Teflon. The piercings presented bacterial colonies on their surface, being higher in plastic piercings probably due to their uneven and rough surface.

[Association between tattoos, piercings and risk behaviors in adolescents].

Science.gov (United States)

Cossio, María Laura T; Giesen, Laura F; Araya, Gabriela; Pérez-Cotapos, María Luisa S

2012-02-01

The use of tattoos and piercings has increased, especially among adolescents in the last decades. To evaluate the prevalence of these behaviors in adolescents and their association with risk behaviors such as alcohol, tobacco and illicit drug use and sexual promiscuity. An anonymous and confidential survey about tattooing and piercings was applied to randomly selected high school teenagers, attending municipal, private-subsidized and private schools, in four sectors of Santiago (north-east, south-east, north-west, south-west). The surveys were answered by 1329 participants with a mean age of 15 years (62% women) from 9 schools in Santiago. The prevalence of tattoos was 1.7% (confidence intervals (CI) 1.1% to 2.5%). The figure for piercings was 30.6% (CI 28.2 to 33.1%). A higher prevalence of tattooing and piercings was observed in groups with a history of psychiatric disorders, criminal records, alcohol, tobacco and illicit drug consumption and initiation of sexual activity (p < 0,001). This study confirms that tattoos and piercings are indicators of adolescent risk behaviors.

Self-piercing riveting - a review\\ud

OpenAIRE

Li, Dezhi; Chrysanthou, Andreas; Patel, Imran; Williams, Geraint J.

2016-01-01

Self-Piercing Riveting (SPR) is a cold mechanical joining process used to join two or more sheets of materials by driving a semitubular rivet piercing through the top sheet or the top and middle sheets and subsequently lock into the bottom sheet under the guidance of a suitable die. SPR was originated half century ago, but it only had significant progress in the last 25 years due to the requirement of joining lightweight materials, such as aluminium alloy structures, aluminium-steel structure...

Overview of complications secondary to tongue and lip piercings.

Science.gov (United States)

Maheu-Robert, Léo-François; Andrian, Elisoa; Grenier, Daniel

2009-07-01

In recent years, intraoral and perioral piercings have grown in popularity among teenagers and young adults. This is of concern to dental and medical professionals because of the risks and complications for oral, dental and general health. The risks and complications associated with tongue and lip piercings range from abnormal tooth wear and cracked tooth syndrome to gingival recession and systemic infections. In this report, we provide an overview of possible problems associated with oral piercings that may be encountered by dentists.

Application of hard coatings for blanking and piercing tools

DEFF Research Database (Denmark)

Podgornik, B.; Zajec, B.; Bay, Niels

2011-01-01

The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing...... critical value under dry friction conditions and leads to tool failure. Therefore, at present oxidation and temperature resistant hard coatings can give improved wear resistance of stamping tools, but elimination of lubricants in blanking and piercing processes is still not feasible....

Behaviour and Modelling of Self-piercing Screw and Self-piercing Rivet Connections: An Experimental and Numerical Investigation

OpenAIRE

Sønstabø, Johan Kolstø; Holmstrøm, Petter Henrik

2013-01-01

Accurate and reliable models of connections are essential for the design of aluminium parts in cars. Today, there exist a few models customized for self-piercing rivets (SPR), but none for self-piercing screws (SPS). This thesis presents an experimental and numerical study on the behaviour of SPR and SPS connections for different loading situations. For the rolled base material, AA6016 in the T4 condition, uniaxial tension, plane strain tension and in-plane single shear tests were performe...

Patients' perceptions of patient care providers with tattoos and/or body piercings.

Science.gov (United States)

Westerfield, Heather V; Stafford, Amy B; Speroni, Karen Gabel; Daniel, Marlon G

2012-03-01

This study evaluated patients' perceptions of patient care providers with visible tattoos and/or body piercings. As tattooing and body piercing are increasingly popular, research that informs nursing administrators regarding policies on patient care providers having visible tattoos and body piercings is warranted. A total of 150 hospitalized adult patients compared pictures of male and female patient care providers in uniform with and without tattoos and/or nonearlobe body piercings. Patient care providers with visible tattoos and/or body piercings were not perceived by patients in this study as more caring, confident, reliable, attentive, cooperative, professional, efficient, or approachable than nontattooed or nonpierced providers. Tattooed female providers were perceived as less professional than male providers with similar tattoos. Female providers with piercings were perceived as less confident, professional, efficient, and approachable than nonpierced female providers. Nursing administrators should develop and/or evaluate policies regarding patient care providers with visible tattoos and/or body piercings.

Profile of oral piercing users and implications resulting from its use

Directory of Open Access Journals (Sweden)

Jeferson da Costa Marchiori

2009-01-01

Full Text Available Objective: To identify the profile of oral piercing users and the possible implications resulting from its use, as well as explaining to dentists about the possible consequences to their patients as a result of wearing this type of jewelry in the oral region.Methods: Fifty-one oral piercing users were interviewed. They were aged between 18 and 42 year, from different social classes, and resident in the city of Santa Maria, Rio Grande do Sul, Brazil.Results: Based on the questionnaires analyzed, the majority of users had tongue or lip piercing as a way to express identity, and 45% reported the occurrence of some type of oral and/or general alteration associated with the use of piercings. Conclusion: The majority of alterations are harmful to the piercing user’s health, therefore, professionals in the Dentistry area must be warnedto explain to their patients, who use oral piercings, about the consequences that may occur and the need for special care to ameliorate these problems.

Complications of oral and peri-oral piercings: a summary of case reports.

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; Van der Weijden, G A

2011-05-01

To systemically search the literature for case reports concerning adverse effects associated with oral and peri-oral piercings on oral health and/or general health.   MEDLINE and the Cochrane Central Register of Controlled Trials (CENTRAL) were searched up through 1 April 2010 to identify appropriate studies. Independent screening of the titles and abstracts identified 1169 papers from MEDLINE and 73 papers from CENTRAL. Subsequently, 67 papers describing 83 cases were processed for data extraction. The case reports described complications in oral and general health. In this review, 96 complications were described for 83 cases. Of the 96 reported complications, 81% (n=84) occurred in cases of tongue piercings, 20% (n=21) in cases of lip piercings and 1% (n=1) in cases of other oral piercings. In eight cases, subjects had two oral and/or peri-oral piercings. Gingival recession was the most frequently described complication. Periodontitis and gingival recession were seen at the central mandibular incisors. Tooth fracture is mostly reported in subjects with tongue piercings. Among the case reports, there were complications like normal post-operative swelling and localized inflammation but also more serious complication that may even have been life threatening. Also in the long term, piercing may be associated with gingival recession and tooth fracture. Therefore, oral and/or peri-oral piercings are not without risks. Patients considering a piercing should be made aware of this. Those patients wearing a piercing should be screened by a dental professional for possible complications on a regular basis. © 2011 John Wiley & Sons A/S.

Unstable oscillatory Pierce modes of neutralized electron beams

International Nuclear Information System (INIS)

Cary, J.R.; Lemons, D.S.

1982-01-01

Oscillatory modes of the Pierce system have been calculated. These modes are found to have growth rates comparable to the previously investigated purely growing modes. When these modes are included, it is found that the Pierce system is unstable for most values of ω/sub p/ L/V 0 >π

Breast abscess after nipple piercing: sonographic findings with clinical correlation.

Science.gov (United States)

Leibman, A Jill; Misra, Monika; Castaldi, Maria

2011-09-01

The purpose of this series was to review the spectrum of clinical and sonographic features associated with infection after nipple piercing. Between 2002 and 2010, 6 patients presented to our breast center with a breast abscess after nipple piercing. A retrospective analysis of the imaging findings was performed with clinical and pathologic correlation. Patients with breast infections after nipple piercing tend to be young, and the timing since piercing varies from 2 weeks to 17 months. Sonography showed a complex or hypoechoic mass in 5 of 6 patients. Treatment of breast abscesses included surgical incision and drainage, percutaneous drainage, and antibiotic therapy. Surgical evacuation is commonly performed; however, sonographically guided aspiration may be an appropriate management strategy.

Tattoos, piercing, and sexual behaviors in young adults.

Science.gov (United States)

Nowosielski, Krzysztof; Sipiński, Adam; Kuczerawy, Ilona; Kozłowska-Rup, Danuta; Skrzypulec-Plinta, Violetta

2012-09-01

Body piercing and tattooing are accepted by a growing number of teenagers and young adults as a way of self-expressing. Some authors suggest association between body piercings/tattoos and early sexual initiation, higher number of sexual partners, or risky sexual behaviors. The aim of the study was to evaluate sexual behaviors among young adults with body modifications (BMs)--tattoos and piercings. One hundred twenty young healthy adults, ages between 20 and 35, were included in the population study. The study group was divided into three subgroups: controls (N = 60), adults with tattoos (N = 28), and adults with piercings (N = 32). The research instrument was a self-prepared questionnaire containing 59 questions assessing socioepidemiological parameters, sexual behaviors, incidents of sexual harassment in the past, and self-attractiveness evaluation, as well as questions concerning tattoos and piercings. Socioepidemiological variables and sexual behaviors were compared between subgroups. To assess and describe the correlation between having BM--tattoos and piercing--and sexual behaviors in the population of young adults by using the logistic regression model. Adults with BMs have had their first intercourse statistically earlier and were more sexually active compared with controls. There were no statically significant differences in sexual orientation, sexual preferences, engaging in risky sexual behaviors, frequency of masturbation, and history of sexual abuse between the groups. In contrast, the frequency of sexual intercourses was statistically higher and oral sex was more likely to be a dominant sexual activity in adults with BM compared with controls. The multivariate logistic model revealed that adults with BM were four times less likely to participate in religious practices and twice more likely to have early sexual initiation. Having BM is associated with early sexual initiation and more liberal attitudes toward sexual behaviors but not with engaging in

The incidence of complications associated with lip and/or tongue piercings: a systematic review.

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; Van der Weijden, G A

2016-02-01

This review determines the incidence of complications associated with lip and/or tongue piercings based on a systematic evaluation of the available literature. MEDLINE-PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through June 2014 to identify appropriate studies. The incidence of complications, as established by a dental professional associated with oral and peri-oral piercings, was evaluated in populations with lip and/or tongue piercings. The quality of the case-control studies was assessed using the Newcastle-Ottawa Scale. For case series studies, the risk of bias was assessed using the National Institute for Health and Clinical Excellence scale. An independent screening of 1580 unique titles and abstracts revealed 15 publications that met the eligibility criteria. The incidence of gingival recessions appeared to be 50% in subjects with lip piercings and 44% in subjects with a tongue piercing. Tooth injuries were observed in 26% individuals with lip piercings and in up to 37% of individuals with tongue piercings. Subjects with a lip piercing were 4.14 times (P = 0.005) more likely to develop gingival recession than those without a lip piercing. Subjects with a tongue piercing were more likely than non-pierced subjects to experience gingival recession (relative risk (RR) 2.77; P = 0.00001) and tooth injuries (RR 2.44; P = 0.003). Both lip and tongue piercings are highly associated with the risk of gingival recession, and tongue piercings are also associated with tooth injuries. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

In Vitro Adherence of Oral Bacteria to Different Types of Tongue Piercings

Directory of Open Access Journals (Sweden)

Lucas Pereira Borges

2016-01-01

Full Text Available The purpose of this work was to verify in vitro adherence of E. corrodens and S. oralis to the surface of tongue piercings made of surgical steel, titanium, Bioplast, and Teflon. For this, 160 piercings were used for the count of Colony Forming Units (CFU and 32 piercings for analysis under scanning electron microscopy. Of these, 96 (24 of each type were individually incubated in 5 mL of BHI broth and 50 μL of inoculum at 37°C/24 h. The other 96 piercings formed the control group and were individually incubated in 5 mL of BHI broth at 37°C/24 h. Plates were incubated at 37°C/48 h for counting of CFU/mL and data were submitted to statistical analysis (p value <0.05. For E. corrodens, difference among types of material was observed (p<0.001 and titanium and surgical steel showed lower bacterial adherence. The adherence of S. oralis differed among piercings, showing lower colonization (p<0.007 in titanium and surgical steel piercings. The four types of piercings were susceptible to colonization by E. corrodens and S. oralis, and bacterial adhesion was more significant in those made of Bioplast and Teflon. The piercings presented bacterial colonies on their surface, being higher in plastic piercings probably due to their uneven and rough surface.

A Dermal Piercing Complicated by Mycobacterium fortuitum

Science.gov (United States)

Scroggins-Markle, Leslie; Kelly, Brent

2013-01-01

Background. Dermal piercings have recently become a fashion symbol. Common complications include hypertrophic scarring, rejection, local infection, contact allergy, and traumatic tearing. We report a rare case of Mycobacterium fortuitum following a dermal piercing and discuss its medical implications and treatments. Case. A previously healthy 19-year-old woman presented complaining of erythema and edema at the site of a dermal piercing on the right fourth dorsal finger. She was treated with a 10-day course of trimethoprim-sulfamethoxazole and one course of cephalexin by her primary care physician with incomplete resolution. The patient stated that she had been swimming at a local water park daily. A punch biopsy around the dermal stud was performed, and cultures with sensitivities revealed Mycobacterium fortuitum. The patient was treated with clarithromycin and ciprofloxacin for two months receiving full resolution. Discussion. Mycobacterium fortuitum is an infrequent human pathogen. This organism is a Runyon group IV, rapidly growing nontuberculous mycobacteria, often found in water,soil, and dust. Treatment options vary due to the size of the lesion. Small lesions are typically excised, while larger lesions require treatment for 2–6 months with antibiotics. We recommend a high level of suspicion for atypical mycobacterial infections in a piercing resistant to other therapies. PMID:24073343

A Dermal Piercing Complicated by Mycobacterium fortuitum

Directory of Open Access Journals (Sweden)

Trisha Patel

2013-01-01

Full Text Available Background. Dermal piercings have recently become a fashion symbol. Common complications include hypertrophic scarring, rejection, local infection, contact allergy, and traumatic tearing. We report a rare case of Mycobacterium fortuitum following a dermal piercing and discuss its medical implications and treatments. Case. A previously healthy 19-year-old woman presented complaining of erythema and edema at the site of a dermal piercing on the right fourth dorsal finger. She was treated with a 10-day course of trimethoprim-sulfamethoxazole and one course of cephalexin by her primary care physician with incomplete resolution. The patient stated that she had been swimming at a local water park daily. A punch biopsy around the dermal stud was performed, and cultures with sensitivities revealed Mycobacterium fortuitum. The patient was treated with clarithromycin and ciprofloxacin for two months receiving full resolution. Discussion. Mycobacterium fortuitum is an infrequent human pathogen. This organism is a Runyon group IV, rapidly growing nontuberculous mycobacteria, often found in water,soil, and dust. Treatment options vary due to the size of the lesion. Small lesions are typically excised, while larger lesions require treatment for 2–6 months with antibiotics. We recommend a high level of suspicion for atypical mycobacterial infections in a piercing resistant to other therapies.

Tattoos and body piercings in the United States: a national data set.

Science.gov (United States)

Laumann, Anne E; Derick, Amy J

2006-09-01

Little is known about the prevalence and consequences of body art application. Our aim was to provide US tattooing and body piercing prevalence, societal distribution, and medical and social consequence data. Random digit dialing technology was used to obtain a national probability sample of 253 women and 247 men who were 18 to 50 years of age. Of our respondents, 24% had tattoos and 14% had body piercings. Tattooing was equally common in both sexes, but body piercing was more common among women. Other associations were a lack of religious affiliation, extended jail time, previous drinking, and recreational drug use. Local medical complications, including broken teeth, were present in one third of those with body piercings. The prevalence of jewelry allergy increased with the number of piercings. Of those with tattoos, 17% were considering removal but none had had a tattoo removed. This was a self-reported data set with a 33% response rate. Tattooing and body piercing are associated with risk-taking activities. Body piercing has a high incidence of medical complications.

The design of gridded pierce guns for accelerators

International Nuclear Information System (INIS)

True, R.

1985-01-01

It is vital to employ ultra-laminar beams in electron linacs to maximize charge transport to the target. This paper presents numerical and experimental design techniques which have led to significant improvements in gridded Pierce guns used in microwave tubes and electron linacs. The paper concludes with two gun/injector concepts which have demonstrated enhanced performance over standard triode Pierce guns

Awareness of health risks associated with body piercing and ...

African Journals Online (AJOL)

Recently, there has been a widespread practice of tattooing and body piercing among youths despite the increased number of potential complications associated to the practice. This study aims to assess the awareness of health risk associated with body piercing and tattooing in Federal Polytechnic Auchi, Edo state.

A Simulation for the Punchless Piercing Process using Lemaitre Damage Model

International Nuclear Information System (INIS)

Lee, Sang Wook; Pourboghrat, Farhang

2005-01-01

The punchless piercing is a process that uses highly pressurized fluid instead of the conventional punch to make holes into the sheet metal. This process has many advantages over the conventional method for piercing various shaped holes into very thin strips of metal, composite, etc. An important cost advantage comes from not having to use a punch. Another important advantage comes from the top quality of pierced holes produced by punchless piercing, as no secondary finishing process will be needed for removing burrs typically found in conventional cutting processes. The ABAQUS/Explicit FEM code coupled with Lemaitre damage model has been used to more precisely characterize the punchless piercing process. The formulation adopted for this purpose focuses on the development of an efficient stress integration algorithm and development of a user material subroutine (VUMAT). For verification, the computed results have been compared with those of the experimental results in the literature and shown to be in good agreement with each other. The results obtained from this work are expected to be of significant interest to automotive and aerospace industries interested in using the punchless piercing process

Water physical and chemical data from current meter and bottle casts from the G.W. PIERCE as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1975-10-22 to 1975-10-31 (NODC Accession 8200067)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the G.W. PIERCE from October 22, 1975 to October 31, 1975. Data were...

Preliminary design for a pierce wiggler beamstick and addendum

International Nuclear Information System (INIS)

Pirkle, D.

1988-05-01

Lawrence Livermore National Laboratory is developing a fast tunable microwave source for operation at 250 GHz and 10kW peak output power. This report presents the preliminary design of a Pierce gun and solenoid magnet that will be compatible with a Pierce-wiggler electron beam formation system (beamstick). The beamstick will be an appropriate power source for a tunable gyro-BWO at 250 GHz. Figure 1 presents the major components of the Pierce-wiggler beamstick: the electron gun, solenoid, beam tunnel, wiggler, and vacuum valve. Figure 2 shows an artistic conception of how the beamstick will interface with the interaction magnet, modulator and gyro-BWO circuit at MIT. 15 figs

In Vitro Adherence of Oral Bacteria to Different Types of Tongue Piercings

OpenAIRE

Borges, Lucas Pereira; Ferreira-Filho, Julio Cesar Campos; Martins, Julia Medeiros; Alves, Caroline Vieira; Santiago, Bianca Marques; Valen?a, Ana Maria Gondim

2016-01-01

The purpose of this work was to verify in vitro adherence of E. corrodens and S. oralis to the surface of tongue piercings made of surgical steel, titanium, Bioplast, and Teflon. For this, 160 piercings were used for the count of Colony Forming Units (CFU) and 32 piercings for analysis under scanning electron microscopy. Of these, 96 (24 of each type) were individually incubated in 5?mL of BHI broth and 50??L of inoculum at 37?C/24?h. The other 96 piercings formed the control group and were i...

Periodontal health and lateral lower lip piercings: a split-mouth cross-sectional study.

Science.gov (United States)

Vilchez-Perez, Miguel Angel; Fuster-Torres, Ma Angeles; Figueiredo, Rui; Valmaseda-Castellón, Eduard; Gay-Escoda, Cosme

2009-07-01

To assess periodontal health of individuals with a lateral lower lip piercing and describe associated periodontal, dental and mucosal complications. A split-mouth study was performed in a sample of 50 patients with a lateral lower lip piercing who attended the Periodontal Pathology and Surgery Unit of the Dental School of the University of Barcelona. The patients underwent periodontal, dental and mucosal examination on both the piercing and the control sides. Piercing users were predominantly women (78%), with a mean age of 21.3 years (SD=4.4). The amounts of keratinized and attached gingiva were significantly lower on the piercing side, and the prevalence of gingival recession was higher (p=0.012). The canine and first bicuspid teeth were the most affected. Tooth fractures and cracks were more frequent on the piercing side (20%) when compared with the control (4%). Mucosal alterations were found in seven patients. The use of lateral lower lip piercings enhances gingival recession and reduces the amounts of keratinized and attached gingiva. These ornaments are also associated with tooth fractures and cracks.

Body piercings and posttraumatic stress disorder symptoms in young adults.

Science.gov (United States)

Bui, Eric; Rodgers, Rachel; Simon, Naomi M; Jehel, Louis; Metcalf, Christina A; Birmes, Philippe; Schmitt, Laurent

2013-02-01

Body piercing, which is prevalent in young adults, has been suggested to be associated with features usually related to posttraumatic stress disorder (PTSD) such as high-risk behaviours and psychopathological symptoms and might be motivated by a wish to deal with prior traumatic experiences. However, to date, no research has investigated the relationship between this practice and PTSD symptoms. The present research aims to investigate the possible relationship between body piercing and PTSD symptoms in French-speaking young adults. According to our results, having two or more body piercings was associated with a twofold increased risk for scoring above the cut-off score for PTSD on the PTSD checklist. Our findings suggest that two or more body piercings might serve as an identifiable marker for PTSD symptoms and may have important implications for clinical screening. Copyright © 2012 John Wiley & Sons, Ltd.

How Dr. Pierce Promoted Himself

Data.gov (United States)

Department of the Interior — This article is about Dr. Raymond V Pierce who owned St. Vincent Island before it became a refuge. The doctor painted advertisements for his famous “Woman’s Tonic”...

Perceptions of a photograph of a woman with visible piercings.

Science.gov (United States)

Martino, Sara

2008-08-01

To examine perceptions of people with visible piercings 105 undergraduate students from four different courses on campus (85 women, 20 men; M age=20.0 yr., SD=3.4) were randomly assigned to rate a photograph of a women with or without piercings on her eyebrow, ear, lip, and nose on 13 characteristics. Analysis indicated the model with visible piercings was rated less religious and more creative, artistic, and mysterious. These findings differ from previous findings on perception of tattoos. Implications and directions for research with different age groups are discussed.

Piercing of corporate veil of nuclear companies; Durchgriffshaftung der Atomkonzerne

Energy Technology Data Exchange (ETDEWEB)

Frenz, Walter [RWTH Aachen Univ. (Germany). Lehr- und Forschungsgebiet Berg-, Umwelt- und Europarecht

2015-11-15

The Federal Ministry of Economics plans that the nuclear companies with all their assets to cover disposal costs can be used where a power plant operator is governed by its parent company, hence the latter Capital or voting majority of the operators holding or these passes; To date, the parent company is liable only limited and not more than five years after the end of the domination of one Subsidiary, oparating a power plant. In this way, prevents ultimately the public sector and thus the Taxpayers have to pay for the long-term consequences of the use of nuclear energy. Until now ensured paragraph 303 AktG a group law Secondary liability the parent companies of the operating company in the case of of termination of the control and profit transfer agreements is very limited for the nuclear liabilities, namely in two ways: The claim is only focused on the backup performance and not at the expense of acquisition and Moreover, according to the case law limited of five years after its foundation; for the area of transformation law comparable rules are valid. thereby the dismantling of a nuclear power station takes just already for 20 years and a final repository is expected before 2050 not be available. [German] Das Bundeswirtschaftsministerium plant, dass die Atomkonzerne mit ihrem ganzen Vermoegen zur Deckung der Entsorgungskosten herangezogen werden koennen, soweit ein Kraftwerksbetreiber von seinem Mutterkonzern beherrscht wird, mithin Letzterer die Kapital- oder Stimmrechtsmehrheit an dem Betreiber haelt bzw. diesen leitet; bislang haftet der Mutterkonzern nur eingeschraenkt und hoechstens fuenf Jahre nach Beendigung der Beherrschung einer Tochtergesellschaft, die ein Kraftwerk betreibt. Auf diese Weise wird verhindert, dass letztlich die oeffentliche Hand und damit der Steuerzahler fuer die Spaetfolgen der Kernenergienutzung zahlen muss. Bislang gewaehrleistet paragraph 303 AktG eine konzernrechtliche Nachhaftung der Muttergesellschaften der

Breast abscess following nipple piercing: a case report and review of the literature.

Science.gov (United States)

Kapsimalakou, Smaragda; Grande-Nagel, Isabell; Simon, Martin; Fischer, Dorothea; Thill, Marc; Stöckelhuber, Beate M

2010-12-01

Nipple piercing gains popularity and social acceptance within the last years, especially among young people. The medical literature reports an increase of complications in the post-piercing period. We report a case of a young woman, who presented with a light enlargement of the right breast and tenderness in the retroareolar region following nipple piercing 5 months ago. On ultrasound, a poorly marginated hypoechoic lesion was seen which was suspicious of an inflammation. After 1 week of antibiotic therapy, the mass had enlarged. As carcinoma could not be excluded, open biopsy was performed. Histology showed signs of chronic mastitis. To date, only a few reports of breast abscess after nipple piercing have been published. With the increasing prevalence of body piercing, it is important to document and report infections which may be discovered many months following piercing. Carcinoma can mimic breast abscess and should be included in the differential diagnosis.

Electromagnetic theory of the radiative Pierce instability

International Nuclear Information System (INIS)

Klochkov, D.N.; Rukhadze, A.A.

1997-01-01

The radiative Pierce instability of a relativistic electron beam in a waveguide stabilized by an infinite strong magnetic field is considered. the increment and conditions for instability development in a wide interval of the beam currents are determined on the basis of the perturbation theory. It is shown that the instability has always the Raman character and is threshold less in current for the Pierce boundary conditions. It permits sufficiently strictly to define the instability saturation level from breaking the resonance condition and to estimate the radiation efficiency

27 CFR 478.148 - Armor piercing ammunition intended for sporting or industrial purposes.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Armor piercing ammunition... AMMUNITION COMMERCE IN FIREARMS AND AMMUNITION Exemptions, Seizures, and Forfeitures § 478.148 Armor piercing ammunition intended for sporting or industrial purposes. The Director may exempt certain armor piercing...

Transmission of Hepatitis C Virus Infection Through Tattooing and Piercing: A Critical Review

Science.gov (United States)

Tohme, Rania A.; Holmberg, Scott D.

2015-01-01

Tattoos and piercings are increasing, especially among youths, but the risk of hepatitis C virus (HCV) infection from these practices has not been adequately assessed and there are conflicting findings in the literature. We evaluated the risk of HCV infection from tattooing and piercing using the Meta-analysis of Observational Studies in Epidemiology (MOOSE) guidelines. Studies that specified the venue of tattooing and/or piercing showed no definitive evidence for an increased risk of HCV infection when tattoos and piercings were received in professional parlors. However, the risk of HCV infection is significant, especially among high-risk groups (adjusted odds ratio, 2.0–3.6), when tattoos are applied in prison settings or by friends. Prevention interventions are needed to avoid the transmission of hepatitis C from tattooing and piercing in prisons, homes, and other potentially nonsterile settings. Youths also should be educated on the need to have tattoos and piercings performed under sterile conditions to avoid HCV infection. PMID:22291098

First glimpse of the functional benefits of clitoral hood piercings.

Science.gov (United States)

Millner, Vaughn S; Eichold, Bernard H; Sharpe, Thomasina H; Lynn, Sherwood C

2005-09-01

In this exploratory study, we identify a positive relationship between vertical clitoral hood piercing and desire, frequency of intercourse and arousal. There were no dramatic differences in orgasmic functioning. Clinicians can play key roles in educating patients about potential outcomes and risks of genital piercing.

Educational intervention about oral piercing knowledge among dental students and adolescents at schools.

Science.gov (United States)

Junco, Pilar; Barrios, Rocío; Ruiz, María José; Bravo, Manuel

2017-10-01

Oral piercing can lead to complications and dentists are in a unique position to detect such complications. The purpose of this study was: (i) to assess the immediate and the long-term effects, on dental students, of a training programme about oral piercing knowledge; and (ii) to assess the immediate effect, on adolescents, of a single educational intervention session about oral piercing. A training programme for dental students (n = 66) was carried out in three phases. The last phase consisted of preparing and giving talks about oral piercing at schools, which was delivered by a random selection of dental students involved in the training programme. Dental students answered a questionnaire about oral piercing knowledge, before, immediately after (only the dental students included in the last phase) and 12 months after the training programme. Adolescents (n = 347) answered a survey about oral piercing knowledge before and after the talks. There were statistically significant differences in all comparison groups, except for the results in the 'before intervention' and in the '12 months after intervention' groups among dental students who had not prepared and given the talks to adolescents. Knowledge about oral piercing significantly improved among adolescents when comparing results before (mean questionnaire score = 3.0) and after (mean questionnaire score = 6.2) the talks. Oral piercing educational intervention had a favourable impact on adolescents and dental students, particularly among those who were more involved in the learning process. © 2017 FDI World Dental Federation.

Joule-Thomson effect in a Pierce electron gun

International Nuclear Information System (INIS)

Batalin, V.A.

1982-01-01

A model which can be investigated both by means of the system of Vlasov equations and by means of ideal gas state equation is proposed for evaluation of emittance growth in the Pierce electron gun of electron beam with the limiting small distribution rate and intended for electron cooling facilities. The assumption has been made that transverse emittance growth is different from the zero. Thermodynamical approach to the problem of electron beam propagation permits to evaluate the increase of its emittance. It is shown that the increase of the electron beam emittance in the Pierce electron gun is similar to Joule-Thompson effect for gases. The effect increases with the decrease of the beam initial temperature. The increase of the emittance can become essential even in hte perfect (without aberration) Pierce optics at beam transverse temperature of the order of 0.1 eV

Tattoos and Piercings: Attitudes, Behaviors, and Interpretations of College Students

Science.gov (United States)

Horne, Jenn; Knox, David; Zusman, Jane; Zusman, Marty E.

2007-01-01

Previously, in those segments of America where "proper" behavior was valued, tattoos and body piercings were examples of what Goffman identified as "stigma"--they spoiled one's identity. Today, tattoos and piercings have become more mainstream. This study reports the survey of 400 undergraduates at a large southeastern university. Regarding…

Electromagnetic theory of the radiative Pierce instability

International Nuclear Information System (INIS)

Klochkov, D.N.; Rukhadze, A.A.

1997-01-01

A study is made of the radiative Pierce instability of a relativistic electron beam propagating in a waveguide in the presence of an infinitely strong magnetic field. The perturbation theory is used to find the growth rates and conditions of instability over a broad range of the beam current. It is shown that, under the Pierce boundary conditions, the instability is Raman in nature, and there is no current threshold for the instability. This allows the instability saturation level to be accurately determined from the condition for the violation of the Cherenkov resonance and the radiation efficiency to be estimated

Equilibrium double layers in extended Pierce diodes

International Nuclear Information System (INIS)

Ciubotariu-Jassy, C.I.

1992-01-01

The extended Pierce diode is similar to the standard (or classical) Pierce diode, but has passive circuit elements in place of the short circuit between the electrodes. This device is important as an approximation to real bounded plasma systems. It consists of two parallel plane electrodes (an emitter located at x=0 and a collector located at x=l) and a collisionless cold electron beam travelling between them. The electrons are neutralized by a background of comoving massive ions. This situation is analysed in this paper and new equilibrium double layer (DL) plasma structures are obtained. (author) 6 refs., 3 figs

The Pierce diode with an external circuit: II, Non-uniform equilibria

International Nuclear Information System (INIS)

Lawson, W.S.

1987-01-01

The non-uniform (non-linear) equilibria of the classical (short circuit) Pierce diode and the extended (series RLC external circuit) Pierce diode are described theoretically, and explored via computer simulation. It is found that most equilibria are correctly predicted by theory, but that the continuous set of equilibria of the classical Pierce diode at α = 2π are not observed. The stability characteristics of the non-uniform equilibria are also worked out, and are consistent with the simulations. 8 refs., 22 figs., 3 tabs

Need for improved public health protection of young people wanting body piercing: evidence from a look-back exercise at a piercing and tattooing premises with poor hygiene practices, Wales (UK) 2015.

Science.gov (United States)

Perry, M; Lewis, H; Thomas, D Rh; Mason, B; Richardson, G

2018-04-30

Following a cluster of serious pseudomonas skin infections linked to a body piercing and tattooing premises, a look-back exercise was carried out to offer clients a screen for blood-borne viruses. Of those attending for screening 72% (581/809) had a piercing procedure in the premises of interest: 94 (16%) were under 16 years of age at the time of screening. The most common site of piercing was ear (34%), followed by nose (27%), nipple (21%) and navel (21%). A small number (<5) tested positive for hepatitis B and C, with no evidence this was linked to the premises. However, 36% (211/581) of clients reported a skin infection associated with their piercing. Using data from client forms, 36% provided a false age. Those aged under 16 years (OR 4.5, 95% CI 2.7-7.7) and those receiving a piercing at an intimate site (OR 2.1, 95% CI 1.3-3.6) were more likely to provide a false age. The findings from this exercise were used to support the drafting of the Public Health (Wales) Bill which proposed better regulation of piercing premises and the need to provide proof of being 18 years of age or over before having a piercing of an intimate site.

Experimental Characterization of Supercavitating Finds Piercing a Ventilated Supercavity

Science.gov (United States)

2013-08-05

01-2011 --31-07-2013 4. TITLE AND SUBTITLE Sa. CONTRACT NUMBER Experimental Characterization of Supercavitating Finds Piercing a Ventilated...presents the results from water tunnel experiments on supercavitating fins performed at the Garfield Thomas Water Tunnel of the Pennsylvania State...SUBJECT TERMS supercavitation , fins, cavity-piercing 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT u a. REPORT I~· ABSTRACT I~· THIS

Tattoos, piercings, and skin adornments.

Science.gov (United States)

Cronin, T A

2001-10-01

Tattoos, body piercings, and other skin adornments have a long and fascinating history, and continue to be prominent today. It is important for dermatology nurses to understand and to educate their patients regarding the dermatologic implications of tattooing, body piecing, and scarification.

Study on corrosion products from ear piercing studs

International Nuclear Information System (INIS)

Rogero, Sizue O.; Costa, Isolda; Saiki, Mitiko

2000-01-01

In this work instrumental neutron activation analysis was applied to analyse elemental composition of commercial gold coated ear piercing substrate and metals present in their corrosion products. The cytotoxic effect was also verified in these corrosion product extracts, probably, due to the lixiviation of Ni present in high quantity in their substrates. The analysis of gold coated ear piercing surfaces by scanning electron microscopy before and after the corrosion test showed coating defects and the occurrence of corrosion process. (author)

Body art: attitudes and practices regarding body piercing among urban undergraduates.

Science.gov (United States)

Schorzman, Cindy M; Gold, Melanie A; Downs, Julie S; Murray, Pamela J

2007-10-01

To describe the knowledge, attitudes, and practices of young adults toward body piercing. An anonymous 30-item survey was given to 103 undergraduate students at the campus health service of a large urban university. The questionnaire collected data on students' perceptions regarding the social acceptability of body piercing, their experiences with and attitudes toward this form of body art, and their knowledge of associated health risks. One hundred (97%) out of the 103 surveys distributed had sufficient data for analysis. Fifty-six percent of participants (age range, 17 to 25 years) reported having a body piercing at one time. Participants with a piercing were more likely to have a tattoo (OR, 4.13; 95% CI, 1.10-15.56; P=.04). The majority of participants (65 [78%]) reported "liking" body piercing on others, though a smaller percentage (45 [52%]) reported "liking" it on themselves (z=3.58, Part is acceptable on others, they feel it is less acceptable on themselves. Study participants displayed a high level of awareness regarding the potential health risks of body art, and, in fact, overestimate those risks. Implications for patient education are addressed.

Oral piercings and their dental implications: a mini review.

Science.gov (United States)

Singh, Amrinder; Tuli, Avantika

2012-05-01

Oral piercing has become common in young adults in recent years. Adolescents are characterized by a compulsive tendency to distinguish themselves from the rest; differences in clothes, hairstyle, or "decorative" details are used to this effect, based on highly-diverse criteria. Dental health-care professionals need to be aware of the procedures and risks involved with oral piercings and the social and psychological reasons that lead people to engage in this practice, regardless of the risks. The present article addresses oral mutilation practices, specifically from the oral health perspective, as it is of concern to dental professionals due to the health risks and oral complications associated with such practices. The various oral ornaments, piercing sites, and their implications, orally, as well as systemically, have been discussed. © 2011 Blackwell Publishing Asia Pty Ltd.

78 FR 78808 - Proposed Flood Elevation Determinations for Pierce County, Washington, and Incorporated Areas

Science.gov (United States)

2013-12-27

...-2013-0002; Internal Agency Docket No. FEMA-B-7748] Proposed Flood Elevation Determinations for Pierce... proposed rule concerning proposed flood elevation determinations for Pierce County, Washington, and... sources in Pierce County, Washington. On April 16, 2012, FEMA published a proposed rulemaking at 77 FR...

Chemical, physical, phytoplankton weight, and other data collected using meteorological sensors, plankton net, secchi disk, CTD, and bottle casts from the G.W. PIERCE as part of the California Cooperative Fisheries Investigation (CALCOFI) project, from 19 June 1971 to 14 September 1980 (NODC Accession 8300037)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, physical, phytoplankton weight, and other data were collected from the G.W. PIERCE from June 19, 1971 to September 14, 1980. Data were collected using...

Oral and facial piercings: a case series and review of the literature.

Science.gov (United States)

López-Jornet, Pía; Navarro-Guardiola, Cristina; Camacho-Alonso, Fabio; Vicente-Ortega, Vicente; Yánez-Gascon, Josefa

2006-07-01

Piercing is popular among young people, who view this practice as a sign of marginality, beauty, or group identity. This study is performed on healthy individuals with oral and facial piercings. Seventy oral and facial piercings were evaluated (17 in the tongue, 13 in the lower lip, 18 in the nostril, 7 in the eyebrow, and 15 in the ear). A specifically designed protocol was used to assess possible complications (inflammatory reactions, pain, dental alterations). Nonparametric tests were used for the statistical analysis of the results. The general complications recorded comprised pain (60% of cases), inflammatory reactions (34.3%), bleeding (24%), dental fractures or fissures (20%), and gingival damage (26.7%). Tongue piercing is associated with pain, inflammatory reactions, and dental problems.

Pregnant Employee Protection Program in a Large Chemical Company.

Science.gov (United States)

Frey, Gunild; Schuster, Michael; Oberlinner, Christoph; Queier-Wahrendorf, Annette; Lang, Stefan; Yong, Mei

2015-09-01

To assess whether a structured employee protection program for pregnant workers at a chemical company has an impact on pregnancy outcomes. Reported pregnancies (n = 1402) between 2003 and 2010 and their outcomes were documented using questionnaires at the time of pregnancy report, end of pregnancy, and 1 year later. Potential maternal exposures were assessed using job histories, workplace inspections, and questionnaires. Participation was 86% overall and was consistently high across subgroups.Pregnancy losses (10.9%), pregnancy complications, and preterm births (8.1%) were in agreement with rates in the general population and were independent of type of work and maternal exposure category. Pregnancy complication rates in this chemical company are not statistically elevated than that in the general population, as suggested in a previous study. The protection program may play a role in preventing complications that may have occurred.

Face Piercing (Body Art): Choosing Pleasure vs. Possible Pain and Posture Instability

Science.gov (United States)

Matheron, Eric; Kapoula, Zoï

2011-01-01

Piercings (body art, i.e., with jewelry) are more and more widespread. They can induce various complications such as infections, allergies, headaches, and various skin, cartilage, or dental problems, and represent a public health problem. We draw attention to possible side effects resulting from face piercing complications observed on four young adults such as eye misalignment, decreased postural control efficiency, and non-specific chronic back pain with associated comorbidity. We found that the origin was pierced jewelry on the face. Removing the jewelry restored eye alignment, improved postural control, and alleviated back pain in a lasting way. We suggest that pierced facial jewelry can disturb somaesthetic signals driven by the trigeminal nerve, and thus interfere with central integration processes, notably in the cerebellum and the vestibular nucleus involved in postural control and eye alignment. Facial piercings could induce sensory–motor conflict, exacerbate, or precipitate a pre-existing undetermined conflict, which leads pain and complaints. These findings are significant for health; further investigations would be of interest. PMID:21960975

Genital piercings: diagnostic and therapeutic implications for urologists.

Science.gov (United States)

Nelius, Thomas; Armstrong, Myrna L; Rinard, Katherine; Young, Cathy; Hogan, LaMicha; Angel, Elayne

2011-11-01

To provide quantitative and qualitative data that will assist evidence-based decision making for men and women with genital piercings (GP) when they present to urologists in ambulatory clinics or office settings. Currently many persons with GP seek nonmedical advice. A comprehensive 35-year (1975-2010) longitudinal electronic literature search (MEDLINE, EMBASE, CINAHL, OVID) was conducted for all relevant articles discussing GP. Authors of general body art literature tended to project many GP complications with potential statements of concern, drawing in overall piercings problems; then the information was further replicated. Few studies regarding GP clinical implications were located and more GP assumptions were noted. Only 17 cases, over 17 years, describe specific complications in the peer-reviewed literature, mainly from international sources (75%), and mostly with "Prince Albert" piercings (65%). Three cross-sectional studies provided further self-reported data. Persons with GP still remain a hidden variable so no baseline figures assess the overall GP picture, but this review did gather more evidence about GP wearers and should stimulate further research, rather than collectively projecting general body piercing information onto those with GP. With an increase in GP, urologists need to know the specific differences, medical implications, significant short- and long-term health risks, and patients concerns to treat and counsel patients in a culturally sensitive manner. Targeted educational strategies should be developed. Considering the amount of body modification, including GP, better legislation for public safety is overdue. Copyright © 2011 Elsevier Inc. All rights reserved.

78 FR 4804 - Revision to the Washington State Implementation Plan; Tacoma-Pierce County Nonattainment Area

Science.gov (United States)

2013-01-23

... Washington State Implementation Plan; Tacoma- Pierce County Nonattainment Area AGENCY: Environmental... Tacoma-Pierce County nonattainment area for the 2006 fine particulate matter (PM 2.5 ) National Ambient... Rules.'' The updated PSCAA rules help implement the recommendations of the Tacoma-Pierce County Clean...

The prevalence of oral and peri-oral piercings in young adults: a systematic review.

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; Van der Weijden, G A

2012-08-01

To determine the prevalence of oral and/or peri-oral piercings in young adults based on a systematic review of the available literature. The MEDLINE-PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through April 2012 to identify appropriate studies. The prevalence of oral and/or peri-oral piercings was evaluated in the general population, as well as by gender and by anatomical site. An independent screening of 1711 unique titles and abstracts resulted in 13 publications that met the eligibility criteria. In total, 11 249 participants (mean age, 20.6 years) were questioned and/or examined for oral and/or peri-oral piercings. In the studies that provided information concerning the presence of oral and/or peri-oral piercings, the prevalence varied from 0.8% to 12%, resulting in a mean prevalence of 5.2%. When examined based on anatomical site, the most common sites were the tongue (a prevalence of 5.6%), followed by the lip (1.5%). Oral piercings were more prevalent in women (5.6%) than men (1.6%). Among the populations that were studied, oral and/or peri-oral piercings were observed in a relatively small percentage (5.2%) of young adults. The prevalence was approximately four times higher among females when compared with males. On the basis of the literature, the tongue was the most common oral site for a piercing. Dental care professionals are in an ideal position to offer information regarding safe piercings and to provide advice regarding oral hygiene, aftercare and possible complications. © 2012 John Wiley & Sons A/S.

76 FR 23708 - Safety Zone; Pierce County Department of Emergency Management Regional Water Exercise, East...

Science.gov (United States)

2011-04-28

...-AA00 Safety Zone; Pierce County Department of Emergency Management Regional Water Exercise, East... the Regional Water Rescue Exercise. Basis and Purpose The Pierce County, Washington, Department of... to read as follows: Sec. 165.T13-0251 Safety Zone; Pierce County Department of Emergency Management...

75 FR 32855 - Safety Zone; Pierce County, WA, Department of Emergency Management, Regional Water Exercise

Science.gov (United States)

2010-06-10

...-AA00 Safety Zone; Pierce County, WA, Department of Emergency Management, Regional Water Exercise AGENCY: Coast Guard, DHS. ACTION: Temporary final rule. SUMMARY: The Pierce County, Washington, Department of... immediate action is necessary to ensure safety of participants in the Pierce County Regional Water Rescue...

Pseudomonas aeruginosa necrotizing chondritis complicating high helical ear piercing case report: clinical and public health perspectives.

Science.gov (United States)

Sandhu, Amonpreet; Gross, Melissa; Wylie, John; Van Caeseele, Paul; Plourde, Pierre

2007-01-01

Auricular or high helical ear piercing is an increasingly widespread fashion trend that is associated with an increased risk of potentially serious post-piercing complications such as auricular perichondritis. An 11-year-old girl developed severe auricular perichondritis following piercing of the upper helical cartilage of her ear at a hairdressing salon. Four days post piercing, she returned to the same salon for a haircut during which the pierced site was manipulated. She presented to her family physician and was treated unsuccessfully with oral cephalexin. She was then referred to an infectious diseases consultant and received antipseudomonal intravenous antibiotics with subsequent resolution. She also required debridement and removal of necrotic cartilage. Public health investigation evaluated potential sources of infection including the piercing gun, disinfectant solutions, and hair cutting spray water bottles. Final culture results of the ear helical aspirate grew Pseudomonas aeruginosa. Pseudomonas aeruginosa was also cultured from one of the water bottles used to wet her hair during the haircut. Although the pseudomonal strains from the water bottle were different than the infecting one, this contamination presents a potential source of wound infection. Damage to the helical cartilage caused by the piercing gun may also have contributed to this infection. Initial empiric antibiotic therapy for these kinds of infection must include anti-pseudomonal coverage. Auricular or high helical ear piercing using a piercing gun is not recommended.

Buneman instability and Pierce instability in a collisionless bounded plasma

International Nuclear Information System (INIS)

Iizuka, Satoru; Saeki, Koichi; Sato, Noriyoshi; Hatta, Yoshisuke

1983-01-01

A systematic experiment is performed on the Buneman instability and the Pierce instability in a bounded plasma consisting of beam electrons and stationary ions. Current fluctuations are confirmed to be induced by the Buneman instability. On the other hand, the Pierce instability gives rise to a current limitation. The phenomena are well explained by Mikhailovskii's theory taking account of ion motion in a bounded plasma. (author)

Body piercing: more than skin deep.

Science.gov (United States)

Hogan, L; Armstrong, M L

2009-09-01

Young adult populations (18-25 years of age) throughout the world have latched onto the mainstream trend of body piercing. Best health care practices for these individuals involves the knowledge of proper procedural techniques, postsite care, common complications, and treatment modalities.

Obituary: A. Keith Pierce, 1918 - 2005

Science.gov (United States)

Livingston, William Charles

2006-12-01

A. Keith Pierce was a solar astronomer who will be remembered for bringing the physics lab to the telescope and for his design of the world's largest solar telescope, the 1.5-meter McMath Telescope on Kitt Peak in Arizona. Born in Lincoln, Nebraska, he died of cancer in Tucson on 11 March 2005. He was eighty-six. His father, Tracy Pierce, had gone to graduate school in Berkeley, California, with a major in mathematics and a minor in astronomy. Fellow students of his class included Seth Nicholson and Donald Shane, people who were later to influence young Keith's life. Tracy Pierce received an appointment as an instructor, later Professor, of mathematics at the University of Nebraska in Lincoln. In his spare time dad Tracy became something of a telescope nut, following "the bible" —Albert Ingall's A.T.M (Amateur Telescope Making). His enthusiasm rubbed off on his son. Seth Nicholson, who became a famous Mt. Wilson Observatory astronomer, and Donald Shane from Berkeley, both stayed at the Pierce home while on their Sigma Xi lecture tours. After two years at Lincoln, followed by two more at Berkeley, Keith had earned his bachelor's degree in astronomy. During World War II, Dr. Shane became personnel director at the E.O. Lawrence Radiation Lab and arranged for Keith to work there at the cyclotron. A crash program to produce U235 from U238 was under way. At a crucial point in 1942 the cyclotron turned out the sought-after material. Much celebration ensued among the Rad Lab leaders. During this gala, Keith was on the night-shift and pretty much on his own. It was then that he turned a valve to the right, when left was called for, and the entire system went down. Shortly thereafter he was sent to Oak Ridge for the duration of the war. He cannot have been thought of badly, however, because he was invited to the Trinity test in New Mexico. (He didn't go because of the pending birth of his first son, John.) The year 1945 found Keith back in Berkeley working on his Ph

The Consequences of Tongue Piercing on Oral and Periodontal Tissues

Science.gov (United States)

Sakellari, Dimitra

2014-01-01

This paper is discussing the potential consequences that may arise by the implementation of piercing in the oral cavity and is also categorizing the consequences according to their extent and severity. Furthermore, this paper is reviewing some possible oral hygiene methods that can prove to be auxiliary in decreasing the potential complications arising from oral piercing. This literature review is based on articles published from 1985 to 2012. PMID:24616814

Chemical Risk Assessment Screening Tool of a Global Chemical Company

Directory of Open Access Journals (Sweden)

Evelyn Tjoe-Nij

2018-03-01

Full Text Available Background: This paper describes a simple-to-use and reliable screening tool called Critical Task Exposure Screening (CTES, developed by a chemical company. The tool assesses if the exposure to a chemical for a task is likely to be within acceptable levels. Methods: CTES is a Microsoft Excel tool, where the inhalation risk score is calculated by relating the exposure estimate to the corresponding occupational exposure limit (OEL or occupational exposure band (OEB. The inhalation exposure is estimated for tasks by preassigned ART1.5 activity classes and modifying factors. Results: CTES requires few inputs. The toxicological data, including OELs, OEBs, and vapor pressure are read from a database. Once the substance is selected, the user specifies its concentration and then chooses the task description and its duration. CTES has three outputs that may trigger follow-up: (1 inhalation risk score; (2 identification of the skin hazard with the skin warnings for local and systemic adverse effects; and (3 status for carcinogenic, mutagenic, or reprotoxic effects. Conclusion: The tool provides an effective way to rapidly screen low-concern tasks, and quickly identifies certain tasks involving substances that will need further review with, nevertheless, the appropriate conservatism. This tool shows that the higher-tier ART1.5 inhalation exposure assessment model can be included effectively in a screening tool. After 2 years of worldwide extensive use within the company, CTES is well perceived by the users, including the shop floor management, and it fulfills its target of screening tool. Keywords: occupational exposure, risk assessment, risk management

The Pierce diode with an external circuit. I. Oscillations about nonuniform equilibria

International Nuclear Information System (INIS)

Lawson, W.S.

1989-01-01

The nonuniform (nonlinear) equilibria of the classical (short circuit) Pierce diode and the extended (series RLC external circuit) Pierce diode are described, and the spectrum of oscillations (stable and unstable) about these equilibria are worked out. It is found that only the external capacitance alters the equilibria, though all elements alter the spectrum. In particular, the introduction of an external capacitor destabilizes some equilibria that are marginally stable without the capacitor. Computer simulations are performed to test the theoretical predictions for the case of an external capacitor only. It is found that most equilibria are correctly predicted by theory, but that the continuous set of equilibria of the classical Pierce diode at Pierce parameters (α=ω/sub pL//v 0 ) that are multiples of 2π are not observed. This appears to be a failure of the simulation method under the rather singular conditions rather than a failure of the theory

Daith Piercing in a Case of Chronic Migraine: A Possible Vagal Modulation

Directory of Open Access Journals (Sweden)

Angelo Cascio Rizzo

2017-11-01

Full Text Available Daith piercing is an ear piercing located at the crus of the helix, bilaterally. It is getting great consent on social media as alternative treatment in chronic migraine. No data about its efficacy and action are available in scientific literature so far. We present the case of a 54-year-old male patient suffering from refractory chronic migraine with medication-overuse, who substantially improved after bilateral ear daith piercing. His migraine was refractory to symptomatic as well as prophylactic therapies. He used to treat headaches with up to five symptomatic drugs per attack and had attempted several pharmacological preventive therapies, including Onabotulinumtoxin A. He also underwent detoxification treatments with intravenous steroids and diazepam, without durable benefit. At the time of daith piercing, the headache-related disability measures showed a HIT-6 score of 64, a MIDAS-score of 70, and a 11-point Box scale of 5. On his own free will, he decided to get a “daith piercing.” After that, he experienced a reduction of migraine attacks, which became very rare, and infrequent, less disabling episodes of tension-type headache (HIT-6 score of 56; MIDAS score of 27, 11-point Box scale of 3. Painkiller assumption has much decreased: he takes only one tablet of indomethacin 50 mg to treat tensive headaches, about four times per month. Beyond a placebo effect, we can speculate a vagal modulation as the action mechanism of daith piercing: a nociceptive sensory stimulus applied to trigeminal and vagal areas of the ear can activate ear vagal afferents, which can modulate pain pathways by means of projections to the caudal trigeminal nucleus, to the locus coeruleus and to the nucleus raphe magnus. Currently, daith piercing cannot be recommended as migraine treatment because of the lack of scientific evidence, the unquantified rate of failure and the associated risks with insertion. However, given the increasing but anecdotal evidence, we

Circuit effects on pierce instabilities, and double-layer formation

International Nuclear Information System (INIS)

Raadu, M.A.; Silevitch, M.B.

1982-11-01

The role of the Pierce instability in the formation of double layers is considered and compared with that of the Buneman instability. Pierce instabilities have been identified in a double-layer experiment, where they lead to ion trapping. Here the effects of external circuit elements are considered. In the case of immobile ions the onset criteria are unaffected, but in the unstable range the growth rate is reduced by the external impedance. Required experimental values of the circuit elements are estimated. The possible relevance to computer simulations is noted. (Authors)

75 FR 14467 - Notice of Inventory Completion: Pierce College District, Lakewood, WA, and Thomas Burke Memorial...

Science.gov (United States)

2010-03-25

... DEPARTMENT OF THE INTERIOR National Park Service Notice of Inventory Completion: Pierce College... completion of an inventory of human remains in the control of the Pierce College District, Lakewood, WA, and...), University of Washington, Seattle, WA. The human remains were most likely removed from Gig Harbor, Pierce...

In Vitro Study on the Adhesion and Colonization of Candida Albicans on Metal and Acrylic Piercings

Directory of Open Access Journals (Sweden)

Stamenov N.

2016-03-01

Full Text Available Oral/perioral piercing may provide an ideal environment for adhesion and colonization of microorganisms. The aim of this study is to perform an “in vitro” research on the capabilities of adhesion of Candida albicans on oral piercings made of plastic and metal. Acrylic and metal piercings were incubated with Candida albicans and then were observed using scanning electron microscopy under different magnifications. A lot of irregularities and roughness were observed on the surface of the plastic piercing unlike the surface of the metal one, which is not so rough. Nevertheless, the number of Candida albicans colonies was considerably larger on the scanned metal surface in comparison to the plastic surface. In vitro the metal surface of the piercing creates better environment for the adhesion and colonization of microorganisms than the acrylic. This could be attributed to the electrostatic forces that most likely attract Candida albicans to the metal piercing in the early stages of biofilm formation.

Face piercing (body art: choosing pleasure vs. possible pain and posture instability

Directory of Open Access Journals (Sweden)

Eric eMatheron

2011-09-01

Full Text Available Piercings (body art, i.e. with jewelry are more and more widespread. They can induce various complications such as infections, allergies, headaches, and various skin, cartilage, or dental problems which will lead to economic effects on health-care systems. We draw attention to other possible side effects resulting from face piercing complications such as eye misalignment, decreased postural control efficiency, and nonspecific chronic back pain. We found that the origin was pierced jewelry on the face. Removing the jewelry restored eye alignment, improved postural control, and alleviated back pain in a lasting way. This observation is important for health; further investigations would be of interest.

Process Monitoring and Fault Diagnosis for Piercing Production of Seamless Tube

Directory of Open Access Journals (Sweden)

Dong Xiao

2016-01-01

Full Text Available With the development of modernization, the application of seamless tube becomes widespread. As the first process of seamless tube, piercing is vital for the quality of the tube. The solid round billet will be transformed into a hollow shell after the piercing process. The defects of hollow shell cannot be cleared in the following process, so a monitoring model for the quality of the hollow shell is important. But the piercing process is very complicated, and a mechanism model is difficult to build between the qualities of the hollow shell and measurement variables. Furthermore, an intelligent model is needed. We established two piercing process monitoring and fault diagnosis models based on the multiway principal component analysis (MPCA model and the multistage MPCA model, respectively, and furthermore we made a comparison between these two concepts. We took three ways to divide the period based on process, K-means, and GA, respectively. Simulation experiments have shown that the multistate MPCA method has advantage over the MPCA method and the model based on the genetic algorithm (GA can monitor the process effectively and detect the faults.

Septic shock after posterior spinal arthrodesis on a patient with Scheuermann kyphosis and multiple body piercings.

Science.gov (United States)

Tsirikos, Athanasios I; Subramanian, Ashok Sridhara

2011-10-15

A case report. We report septic shock as postoperative complication following an instrumented posterior spinal arthrodesis on a patient with multiple body piercings. The management of this potentially catastrophic complication and outcome of treatment is been discussed. Body piercing has become increasingly more common because of change in culture or as a fashion statement. This has been associated with local or generalized ill effects including tissue injury, skin and systemic infections, and septic shock. There is no clear guideline pathway regarding removal and reinsertion of body piercings in patients who undergo major surgery. Complications following orthopedic or spinal procedures associated with body piercing have not been reported. We reviewed the medical notes and radiographs of an adolescent patient with Scheuermann kyphosis and multiple body piercings who underwent a posterior spinal arthrodesis and developed septic shock. Septic shock developed on postoperative day 2 after reinsertion of all piercings following the patient's request. The patient became systemically very unwell and required intensive medical management, as well as a total course of antibiotics of 3 months. The piercings remained in situ. She did not develop a wound infection despite the presence of bacteremia and spinal instrumentation. The patient had no new piercings subsequent to her deformity procedure. Two and a half years after spinal surgery she reported no medical problems, had a balanced spine with no loss of kyphosis correction and no evidence of nonunion or recurrence of deformity. The development of septic shock as a result of piercing reinsertion in the postoperative period has not been previously reported. This is an important consideration to prevent potentially life-threatening complications following major spinal surgery.

Reaksi Radang pada Lidah dengan Tongue Piercing (Kajian in vivo pada Lidah Tikus Jantan Sprague dawley

Directory of Open Access Journals (Sweden)

Feby Aryani

2015-10-01

Full Text Available Today tongue piercing has become increasingly popular in the society. Several case reports associated with tongue piercing have presented various complications, such as tooth fracture, viral infection (HIV, Hepatitis B and C, herpes simplex, Epstein Barr, fungal infection (Candida spp, pain altered taste, edema, paresthesis, gingival recession, prolonged bleeding, contact dermatitis. However, there is no scientific evidence to reveal hispathological change in tongue piercing. The aim of this study is to investigate the inflammation response to tongue piercing in Spraque Dawley rats. Eighteen Sprague Dawley rats were divided into one control group of 3 untreated rats and three experimental groups of 5 rats each, according to the duration of tongue piercing until the end of 1st week (A, 6th week (B and 12th week (C. At the end of treatments, the rats were anesthetized and sacrifices. Paraffin embedded tongue specimens were prepared for histological examination with H&E stainig. The number of inflammatory cells (PMN leukocytes, lymphocytes, macrophages was counted under light microscope. All experimental procedures were carried out under approval of study protocol by the Health and Medical Research Ethics Committee, Faculty of Medicine, Gadjah Mada University, Yogyakarta. The results of this study indicated that the number of PMN leukocytes, lymphocytes, and macrophages was increasing to the 1st week after tongue piercing. The number of lymphocytes and macrohpages was still increasing after 6th and 12th weeks of piercing, but the bumber of PMN leukocytes, lymphocytes, and macrophages between the groups of 1st, 6th, and 12th weeks after piercing. It was concluded that tongue piercing induce inflammatory response for 12 weeks in Sprague Dawley rats.

Application of Hard Coatings for Improved Tribological Performance of Blanking and Piercing Tools

DEFF Research Database (Denmark)

Podgornik, B.; Zajec, B.; Bay, Niels

2010-01-01

The aim of the present investigation was to examine the possibility of reducing lubrication and replacing expensive tungsten carbide material in blanking/piercing through introduction of hard tool coatings. Results show that hard PVD coatings can be successfully used in blanking/piercing applicat...

Body piercing, tattooing, self-esteem, and body investment in adolescent girls.

Science.gov (United States)

Carroll, Lynne; Anderson, Roxanne

2002-01-01

Postmodern perspectives of body piercing and tattooing interpret these as signifiers of the self and attempts to attain mastery and control over the body in an age of increasing alienation. In this exploratory study, 79 adolescent females, ages 15 to 18 (M = 16.08, SD = 1.36), completed the Coopersmith Self-Esteem Inventory (SEI; Coopersmith, 1981), the Beck Depression Inventory (BDI; Beck, 1978), the Body Investment Scale (BIS; Orbach & Mikulincer, 1998), and the State-Trait Anger Expression Inventory (STAXI-2; Spielberger, 1996). Analyses revealed that body piercings and tattoos were significantly correlated with trait anger (Angry Reaction subscale scores). A multiple regression analysis indicated that three of the dependent variables (Trait Anger-Reaction, BDI, and Feeling subscale of the BIS) were predictors of the total number of body piercings and tattoos.

Finite ion velocity effects on the stability of Pierce-like diodes

International Nuclear Information System (INIS)

Kolinsky, H.; Schamel, H.

1994-01-01

The stability of Pierce-like plasma diodes is investigated for arbitrary ion injection velocities. A recently developed integral formalism that accounts for ion dynamical effects is applied to derive a generalized dispersion relation for electrostatic perturbations. Its evaluation exhibits several new features, such as the appearance of growing oscillatory modes, which become Pierce--Buneman modes in the limit of initially resting ions, and of weakly damped oscillatory modes, which become undamped ion plasma oscillations in this limit. The stability of this bounded plasma system is shown to be controlled by the new control parameter at signga=α(1+at signgm) 1/2 , where α is the Pierce parameter and at signgm≡m ev 2 e0 /m iv 2 i0 the ratio of electron and ion kinetic energy at the emitter

Control electron beam oscillation regimes in Pierce diode with overcritical current

International Nuclear Information System (INIS)

Rempen, I.S.; Khramov, A.E.

2001-01-01

The effect of the delayed feedback on the complex oscillation regimes in the electron flux with the overcritical current in the Pierce diode is studied. The possibility of controlling the oscillation regimes through changing the feedback parameters is shown. The finite-dimensional model, describing the behavior of the electron flux in the Pierce diode hydrodynamic model, is constructed. Its behavior under the effect of the delayed feedback is studied [ru

People with Multiple Tattoos and/or Piercings Are Not at Increased Risk for HBV or HCV in The Netherlands

Science.gov (United States)

Urbanus, Anouk T.; van den Hoek, Anneke; Boonstra, Albert; van Houdt, Robin; de Bruijn, Lotte J.; Heijman, Titia; Coutinho, Roel A.; Prins, Maria

2011-01-01

Background Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in the Netherlands who acquired their tattoos and piercings in the Netherlands and/or abroad. Methods Tattoo artists, piercers, and people with multiple tattoos and/or piercings were recruited at tattoo conventions, shops (N = 182), and a biannual survey at our STI-outpatient clinic (N = 252) in Amsterdam. Participants were interviewed and tested for anti-HBc and anti-HCV. Determinants of HBV and HCV infections were analysed using logistic regression analysis. Results The median number of tattoos and piercings was 5 (IQR 2–10) and 2 (IQR 2–4), respectively. Almost 40% acquired their tattoo of piercing abroad. In total, 18/434 (4.2%, 95%CI: 2.64%–6.46%) participants were anti-HBc positive and 1 was anti-HCV positive (0.2%, 95%CI: 0.01%–1.29%). Being anti-HBc positive was independently associated with older age (OR 1.68, 95%CI: 1.03–2.75 per 10 years older) and being born in an HBV-endemic country (OR 7.39, 95%CI: 2.77–19.7). Tattoo- and/or piercing-related variables, like having a tattoo or piercing in an HBV endemic country, surface percentage tattooed, number of tattoos and piercings etc., were not associated with either HBV or HCV. Conclusions We found no evidence for an increased HBV/HCV seroprevalence among persons with multiple tattoos and/or piercings, which might be due to the introduction of hygiene guidelines for tattoo and piercing shops in combination with the low observed prevalence of HBV/HCV in the general population. Tattoos and/or piercings, therefore, should not be considered risk factors for HBV/HCV in the Dutch population. These findings imply the importance of implementation of hygiene guidelines in other countries. PMID

People with multiple tattoos and/or piercings are not at increased risk for HBV or HCV in The Netherlands.

Science.gov (United States)

Urbanus, Anouk T; van den Hoek, Anneke; Boonstra, Albert; van Houdt, Robin; de Bruijn, Lotte J; Heijman, Titia; Coutinho, Roel A; Prins, Maria

2011-01-01

Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in The Netherlands who acquired their tattoos and piercings in The Netherlands and/or abroad. Tattoo artists, piercers, and people with multiple tattoos and/or piercings were recruited at tattoo conventions, shops (N = 182), and a biannual survey at our STI-outpatient clinic (N = 252) in Amsterdam. Participants were interviewed and tested for anti-HBc and anti-HCV. Determinants of HBV and HCV infections were analysed using logistic regression analysis. The median number of tattoos and piercings was 5 (IQR 2-10) and 2 (IQR 2-4), respectively. Almost 40% acquired their tattoo of piercing abroad. In total, 18/434 (4.2%, 95%CI: 2.64%-6.46%) participants were anti-HBc positive and 1 was anti-HCV positive (0.2%, 95%CI: 0.01%-1.29%). Being anti-HBc positive was independently associated with older age (OR 1.68, 95%CI: 1.03-2.75 per 10 years older) and being born in an HBV-endemic country (OR 7.39, 95%CI: 2.77-19.7). Tattoo- and/or piercing-related variables, like having a tattoo or piercing in an HBV endemic country, surface percentage tattooed, number of tattoos and piercings etc., were not associated with either HBV or HCV. We found no evidence for an increased HBV/HCV seroprevalence among persons with multiple tattoos and/or piercings, which might be due to the introduction of hygiene guidelines for tattoo and piercing shops in combination with the low observed prevalence of HBV/HCV in the general population. Tattoos and/or piercings, therefore, should not be considered risk factors for HBV/HCV in the Dutch population. These findings imply the importance of implementation of hygiene guidelines in other countries.

People with multiple tattoos and/or piercings are not at increased risk for HBV or HCV in The Netherlands.

Directory of Open Access Journals (Sweden)

Anouk T Urbanus

Full Text Available BACKGROUND: Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in The Netherlands who acquired their tattoos and piercings in The Netherlands and/or abroad. METHODS: Tattoo artists, piercers, and people with multiple tattoos and/or piercings were recruited at tattoo conventions, shops (N = 182, and a biannual survey at our STI-outpatient clinic (N = 252 in Amsterdam. Participants were interviewed and tested for anti-HBc and anti-HCV. Determinants of HBV and HCV infections were analysed using logistic regression analysis. RESULTS: The median number of tattoos and piercings was 5 (IQR 2-10 and 2 (IQR 2-4, respectively. Almost 40% acquired their tattoo of piercing abroad. In total, 18/434 (4.2%, 95%CI: 2.64%-6.46% participants were anti-HBc positive and 1 was anti-HCV positive (0.2%, 95%CI: 0.01%-1.29%. Being anti-HBc positive was independently associated with older age (OR 1.68, 95%CI: 1.03-2.75 per 10 years older and being born in an HBV-endemic country (OR 7.39, 95%CI: 2.77-19.7. Tattoo- and/or piercing-related variables, like having a tattoo or piercing in an HBV endemic country, surface percentage tattooed, number of tattoos and piercings etc., were not associated with either HBV or HCV. CONCLUSIONS: We found no evidence for an increased HBV/HCV seroprevalence among persons with multiple tattoos and/or piercings, which might be due to the introduction of hygiene guidelines for tattoo and piercing shops in combination with the low observed prevalence of HBV/HCV in the general population. Tattoos and/or piercings, therefore, should not be considered risk factors for HBV/HCV in the Dutch population. These findings imply the importance of implementation of hygiene guidelines in other countries.

Mycobacterium fortuitum and anaerobic breast abscess following nipple piercing: case presentation and review of the literature.

Science.gov (United States)

Bengualid, Victoria; Singh, Veera; Singh, Herpreet; Berger, Judith

2008-05-01

Body piercing has become increasingly prevalent. We describe a case of breast infection with combined mycobacteria and anaerobe following nipple piercing, and review the literature. A 17-year-old female developed a breast abscess 4 months after nipple piercing. Cultures grew Prevotalla melangenica and Mycobacterium fortuitum. She required drainage and antibiotic treatment. Three months into her treatment she stopped her medications, relapsed, and required drainage. Two months later, on antimycobacteria therapy, her wound is healing. Review of the infectious complications of nipple piercing yielded 12 cases, 5 of which had a foreign body. The pathogens isolated (coagulase negative staphylococcus, mycobacteria, streptococcus, anaerobe, and gordonia) are not the usual organisms to be isolated from a breast abscess. This could result from reporting bias or the presence of a foreign body, the nipple ring. The three cases of mycobacteria, in addition to ours, are reviewed. The average age is 22 years. Three to 9 months elapsed between piercing and infection. All cases required drainage. Antimycobacteria therapy was used in three of the four cases for 10 days to 6 months. With the increasing prevalence of body piercing, it is important to document and report infections. We describe a breast abscess following nipple piercing with combined anaerobic and a mycobacterial pathogens. This underscores the need for obtaining cultures including anaerobes and mycobacteria.

Triple inverter pierce oscillator circuit suitable for CMOS

Science.gov (United States)

Wessendorf,; Kurt, O [Albuquerque, NM

2007-02-27

An oscillator circuit is disclosed which can be formed using discrete field-effect transistors (FETs), or as a complementary metal-oxide-semiconductor (CMOS) integrated circuit. The oscillator circuit utilizes a Pierce oscillator design with three inverter stages connected in series. A feedback resistor provided in a feedback loop about a second inverter stage provides an almost ideal inverting transconductance thereby allowing high-Q operation at the resonator-controlled frequency while suppressing a parasitic oscillation frequency that is inherent in a Pierce configuration using a "standard" triple inverter for the sustaining amplifier. The oscillator circuit, which operates in a range of 10 50 MHz, has applications for use as a clock in a microprocessor and can also be used for sensor applications.

Numerical simulations of semi-armor-piercing warhead penetrating aircraft carrier target

OpenAIRE

Dong Sangqaing; Cai Xinghui; Wang Guoliang; Gao Yunliang; Lu Jiangren

2015-01-01

FEM models of semi-armor-piercing warhead penetrating aircraft carrier deck are established, which are validated by related experimental data. Base on the models, the process of semi-armor-piercing warhead penetrating aircraft carrier deck with different incidence angles and attack angles are carried out. The results show that incidence angles have no remarkable influence on penetration capability of the projectile under the circumstance of zero attack angle. Ductility reaming damage mode and...

[Tattooing and body piercing--experiences from public health infection surveillance by a public health office].

Science.gov (United States)

Heudorf, U; Kutzke, G; Seng, U

2000-04-01

Tattooing and piercing have become increasingly popular in recent years. Both methods involve several medical risks, including transmission of infectious diseases. There are many reports on wound infections as well as transmission of hepatitis and human immunodeficiency viruses etc. According to these facts special hygiene regulations for tattooing and piercing have been published in Germany. Based on these regulations the public health department of the city of Frankfurt am Main, Germany, carried out special hygiene controls in such studios, one a year. Special tattoo or piercing exhibitions were also controlled. Results are reported here. Studios for tattoos or piercing were informed about hygiene rules and annually controlled from 1995-1999, using a special check list on cleanliness in the studios, disinfection and sterilisation procedures etc. For permission of tattoo and piercing exhibitions special hygiene orders were made mandatory. During 1995-1997 the absolute number of complaints decreased from 20 to 9, in spite of the increasing number of tattoo studios in Frankfurt am Main (from 6 to 10). This was true also of the tattoo and piercing exhibitions. After 1 year without control visits however, an increase of complaints was to be seen in 1999. According to our experience tattooists and piercers are interested in good hygiene practice. But our data showing the worsening hygiene data in one year without control visits also demonstrate the necessity of regular controls by the authorities. According to the reports on infectious complications of tattooing and piercing and according to the data reported here hygienic advice and control is an important task of Public Health services.

Circuit effects on Pierce instabilities revisited

International Nuclear Information System (INIS)

Kuhn, S.; Hoerhager, M.; Crystal, T.L.

1985-01-01

The problem of external circuit effects on Pierce diode instability studied by Raadu and Silevitch is reconsidered. The characteristic equation and the ensuing eigenfrequencies are found to disagree with those given by the authors above, which discrepancy is attributed to the fact that one of their boundary conditions is inconsistent with the model chosen. (author)

Genital piercings in the context of acute sexual assault.

Science.gov (United States)

Goldberg, Amy P

2017-11-01

After an acute sexual assault, children and adolescents often present for medical evaluation and treatment. Physicians have an important role in both the medical and legal components of these cases. Careful physical examination and questioning are important in determining the origin of the trauma. In the presented case report, genital trauma after an acute sexual assault was noted and attributed to the alleged offender's penis piercing. The genital trauma caused by the piercing provided physical evidence linking offender to victim and may have implications for the victim's risk of HIV infection and other blood borne pathogens. Copyright © 2017 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

27 CFR 478.149 - Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Armor piercing ammunition... Armor piercing ammunition manufactured or imported for the purpose of testing or experimentation. The provisions of §§ 478.37 and 478.99(d) with respect to the manufacture or importation of armor piercing...

Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets

International Nuclear Information System (INIS)

Kim, W. Y.; Kim, D. B.; Park, J. G; Kim, D. H.; Kim, K. H.; Lee, I. H.; Cho, H. Y.

2014-01-01

A self-piercing rivet (SPR) is a mechanical component for joining dissimilar material sheets such as those of aluminum alloy and steel. Unlike conventional rivets, the SPR directly pierces sheets without the need for drilling them beforehand. However, the regular SPR can undergo buckling when it pierces a high-strength steel sheet, warranting the design of a helical SPR. In this study, the joining and forging processes using the helical SPR were simulated using the commercial FEM code, DEFORM-3D. High-tensile-strength steel sheets of different strengths were joined with aluminum alloy sheets using the designed helical SPR. The simulation results were found to agree with the experimental results, validating the optimal design of a helical SPR that can pierce high-strength steel sheets

Design of Helical Self-Piercing Rivet for Joining Aluminum Alloy and High-Strength Steel Sheets

Energy Technology Data Exchange (ETDEWEB)

Kim, W. Y.; Kim, D. B.; Park, J. G; Kim, D. H.; Kim, K. H.; Lee, I. H.; Cho, H. Y. [Chungbuk National University, Cheongju (Korea, Republic of)

2014-07-15

A self-piercing rivet (SPR) is a mechanical component for joining dissimilar material sheets such as those of aluminum alloy and steel. Unlike conventional rivets, the SPR directly pierces sheets without the need for drilling them beforehand. However, the regular SPR can undergo buckling when it pierces a high-strength steel sheet, warranting the design of a helical SPR. In this study, the joining and forging processes using the helical SPR were simulated using the commercial FEM code, DEFORM-3D. High-tensile-strength steel sheets of different strengths were joined with aluminum alloy sheets using the designed helical SPR. The simulation results were found to agree with the experimental results, validating the optimal design of a helical SPR that can pierce high-strength steel sheets.

[A PhD completed. Trauma to the gingiva by oral hygiene aids and oral piercings].

Science.gov (United States)

Hennequin-Hoenderdos, N L; Slot, D E; van der Weijden, G A

2017-12-01

Maintaining healthy teeth and soft oral tissue is important. Clinical research has shown manual toothbrushes with end-rounded filaments to cause significantly less gingival abrasions than those without end-rounding. Tapered filaments are an alternative to end-rounded filaments, but there is no solid evidence for their effectiveness. For the interdental spaces that the toothbrush doesn't reach, the use of special oral hygiene aids is advised. Clinical studies of gingivitis patients have shown that both interdental brushes and plastic-rubber bristles reduce gingivitis after 4 weeks of use. Plastic-rubber bristles result in a significant improvement in the tendency for interdental bleeding compared with interdental brushes, and they cause less abrasion of the gingiva. Other factors that can potentially traumatise soft and hard oral tissue are oral piercings. Wearing oral piercings is not without risk. Tongue and lip piercings are associated with the risk of gingival recession, and tongue piercings are associated with tooth fractures. To prevent the risk of complications, patients should be discouraged from wearing oral piercings.

Nipple piercing may be contraindicated in male patients with chest implants.

Science.gov (United States)

de Kleer, N; Cohen, M; Semple, J; Simor, A; Antonyshyn, O

2001-08-01

The authors present a man who underwent chest augmentation and nipple piercing. The patient developed chronic nipple infection, which led to unnecessary invasive diagnostic procedures, serious implant infection, and eventually urgent explantation. This unfavorable scenario illustrates the distinct features of the procedure in men, which includes close proximity of the nipple to the implant and reduced awareness by health care providers. Based on this case the authors recommend avoiding nipple piercing in men with chest implants.

Accuracy of thick-walled hollows during piercing on three-high mill

International Nuclear Information System (INIS)

Potapov, I.N.; Romantsev, B.A.; Shamanaev, V.I.; Popov, V.A.; Kharitonov, E.A.

1975-01-01

The results of investigations are presented concerning the accuracy of geometrical dimensions of thick-walled sleeves produced by piercing on a 100-ton trio screw rolling mill MISiS with three schemes of fixing and centering the rod. The use of a spherical thrust journal for the rod and of a long centering bushing makes it possible to diminish the non-uniformity of the wall thickness of the sleeves by 30-50%. It is established that thick-walled sleeves with accurate geometrical dimensions (nonuniformity of the wall thickness being less than 10%) can be produced if the system sleeve - mandrel - rod is highly rigid and the rod has a two- or three-fold stability margin over the length equal to that of the sleeve being pierced. The process of piercing is expedient to be carried out with increased angles of feed (14-16 deg). Blanks have been made from steel 12Kh1MF

Application of QRM approach in a chemical company

Directory of Open Access Journals (Sweden)

Carolina Belotti Pedroso

2017-06-01

Full Text Available The Quick Response Management (QRM has as its main goal lead time reduction in companies that offer a wide range of products. With the evolution of production paradigms and considering the current context in which organizations operate, the necessity of competition based on time is growing increasingly. Due to this, and in order to minimize them, this research focused on investigating the main causes of these long lead times in a company active in the chemical sector. The research started with a bibliographic review about the subject of QRM; the second part of the study consisted of field research and the use of a computer simulation application (MPX. Results from the research show the effectiveness of applying concepts from QRM for lead time reduction, whereby a reduction of around 50% in lead time was possible. This paper outlines contributions to the theories about the subject and collaborates to disseminate this issue, which is relatively scarce in Brazil, more broadly.

Rehabilitation of Nose following Chemical Burn Using CAD/CAM Made Substructure for Implant Retained Nasal Prosthesis: A Clinical Report

Directory of Open Access Journals (Sweden)

Saurabh Chaturvedi

2017-01-01

Full Text Available Insufficient knowledge of medical chemicals and their improper use have destructive effects. Accidental exposure to chemicals on facial tissue may result in large facial defect. For ages the tradition of piercing nose is common but improper use of unknown chemical for piercing has deleterious effect. Mostly rhinectomy defects are acquired caused by trauma or malignant diseases. Prosthetic rehabilitation is the preferred treatment of choice for any large rhinectomy defects as medical and surgical interventions are ineffective in developing esthetics. Main concern with the prosthesis for such defects is retention. This article describes rehabilitation of a patient with large size nasal defect created by chemical burn in childhood during piercing. Implant retained customized silicone nasal prosthesis was fabricated using simple O-ring attachments and innovative modified polyamide acrylic resin substructure acting as skeleton.

Smithsonian Marine Station (SMS) at Fort Pierce

Science.gov (United States)

share current Smithsonian research on the plants and animals of the Indian River Lagoon and marine Smithsonian Marine Station at Fort Pierce Website Search Box Search Field: SMS Website Search Twitter SMS Home › Welcome to the Smithsonian Marine Station Homepage slideshow Who We Are... The

Pierce Lumber, Inc. - Clean Water Act Public Notice

Science.gov (United States)

The EPA is providing notice of a proposed Administrative Penalty Assessment against Pierce Lumber, Inc. (“Respondent”), located at 1629 13th Street, Belle Plaine, IA for alleged violations of its National Pollutant Discharge Elimination System permit (perm

The hole picture: risks, decision making, purpose, regulations, and the future of body piercing.

Science.gov (United States)

Armstrong, Myrna L; Koch, Jerome R; Saunders, Jana C; Roberts, Alden E; Owen, Donna C

2007-01-01

Can it be said that body piercing is ubiquitous, found across all socioeconomic groups? The major concentration is among adolescents and young adults 15 to 30 years old, in some studies, 50% of the population. Commonly identified physical risks are bleeding, tissue trauma, and bacterial infections; psychosocial risks are unhappiness, low self-esteem, and disappointment. The Health Belief Model is used to explain decision making; purposes for body piercing consistently center on personal expression (self-identity) and uniqueness. The international and US body piercing regulations are discussed, leading to the need for tracking complications globally and standardization of regulations. Proactive health education for clients and health providers remains a priority.

Oral parafunctions, piercing and signs and symptoms of temporomandibular disorders in high school students.

Science.gov (United States)

Mejersjö, Christina; Ovesson, Daniel; Mossberg, Birgitta

2016-01-01

The use of chewing-gum and piercing has become common among adolescents and might result in increased oral muscle activity and overloading. Aim To investigate the frequency of oral piercing and parafunctions in relation to symptoms of temporomandibular disorders (TMD) among adolescents. One hundred and twenty-four third level high school students, living either in a city or in a small town, enrolled in either science or media programmes, were included. The students completed a questionnaire regarding different parafunctions and symptoms of TMD. A clinical examination of the temporomandibular system and estimation of the tooth wear was performed in 116 students. Chewing-gum was used by 86% of the students (25% with a daily use) and 14% had an oral piercing. The science students used more chewing gum than the media students (p = 0.008), while the media students had more piercings (p headache, 18% for clicking, 7% for facial pain and 6% for difficulty to open wide. Girls reported more headaches (p = 0.007) and more severe symptoms (p = 0.003), had more medical consultations and used more analgesics (both p headache (p temporomandibular joints and muscles (both p headache and muscle tenderness (both p headache (p < 0.05) and tooth wear (p = 0.004). There is an association between use of chewing gum, nail biting, oral piercing, and symptoms of TMD.

People with multiple tattoos and/or piercings are not at increased risk for HBV or HCV in The Netherlands

NARCIS (Netherlands)

Urbanus, Anouk T.; van den Hoek, Anneke; Boonstra, Albert; van Houdt, Robin; de Bruijn, Lotte J.; Heijman, Titia; Coutinho, Roel A.; Prins, Maria

2011-01-01

Although published results are inconsistent, it has been suggested that tattooing and piercing are risk factors for HBV and HCV infections. To examine whether tattooing and piercing do indeed increase the risk of infection, we conducted a study among people with multiple tattoos and/or piercings in

Self-esteem, propensity for sensation seeking, and risk behaviour among adults with tattoos and piercings.

Science.gov (United States)

Hong, Bo-Kyung; Lee, Hyo Young

2017-12-13

Background: In recent years, increasing numbers of adults and adolescents have opted to undergo tattoo and piercing procedures. Studies among adolescents with tattoo and piercing have usually explored the relationship between one factor and the decision to have tattoos and/or piercings. The aim of this study was to determine relationships between body cosmetic procedures and selfesteem, propensity for sensation seeking, and risk behaviours among adults. Materials and Methods: The subjects were divided into two groups, i.e. , those with (n=429) and those without tattoos/piercings (n=237), and self-esteem, propensity for sensation seeking, and risk behaviour were compared between the two groups using self-report questionnaires. To analyse differences in self-esteem and the propensity for sensation seeking, general characteristics were statistically adjusted. In addition, general characteristics, self-esteem, and propensity for sensation seeking were statistically adjusted to determine differences in the propensity for risk behaviour between the two groups. Results: Significant differences were observed in age, marital status, income level, occupation, values or sensitivity to fashion, and educational level between the group with and that without tattoos/ piercings. There was no significant difference in self-esteem, whereas there were significant differences in the propensity for sensation seeking and risk behaviour between the two groups. Conclusions: Continuous attention to, and interest in, the increased incidence of tattooing and piercing are necessary, especially in terms of public interventions for health education and health promotion, as these forms of self-adornment are associated with behaviours that pose a risk to health.

Self-esteem, propensity for sensation seeking, and risk behaviour among adults with tattoos and piercings

Directory of Open Access Journals (Sweden)

Bo-Kyung Hong

2017-12-01

Full Text Available Background: In recent years, increasing numbers of adults and adolescents have opted to undergo tattoo and piercing procedures. Studies among adolescents with tattoo and piercing have usually explored the relationship between one factor and the decision to have tattoos and/or piercings. The aim of this study was to determine relationships between body cosmetic procedures and selfesteem, propensity for sensation seeking, and risk behaviours among adults. Materials and Methods: The subjects were divided into two groups, i.e., those with (n=429 and those without tattoos/piercings (n=237, and self-esteem, propensity for sensation seeking, and risk behaviour were compared between the two groups using self-report questionnaires. To analyse differences in self-esteem and the propensity for sensation seeking, general characteristics were statistically adjusted. In addition, general characteristics, self-esteem, and propensity for sensation seeking were statistically adjusted to determine differences in the propensity for risk behaviour between the two groups. Results: Significant differences were observed in age, marital status, income level, occupation, values or sensitivity to fashion, and educational level between the group with and that without tattoos/ piercings. There was no significant difference in self-esteem, whereas there were significant differences in the propensity for sensation seeking and risk behaviour between the two groups. Conclusions: Continuous attention to, and interest in, the increased incidence of tattooing and piercing are necessary, especially in terms of public interventions for health education and health promotion, as these forms of self-adornment are associated with behaviours that pose a risk to health.

The NASA/IPAC Teacher Archive Research Program (NITARP) at Pierce College

Science.gov (United States)

Mallory, Carolyn R.; Feig, M.; Mahmud, N.; Silic, T.; Rebull, L.; Hoette, V.; Johnson, C.; McCarron, K.

2011-01-01

Our team from Pierce Community College, Woodland Hills, CA, participated in the NASA/IPAC Teacher Archive Research Program (NITARP) this past year (2010). (NITARP is described in another poster, Rebull et al.) Our team worked with archival Spitzer, 2MASS, and optical data to look for young stars in CG4, part of the Gum Nebula; our scientific results are described in a companion poster, Johnson et al. In this poster, we describe more about what we learned and how we incorporated our NITARP experiences into the Pierce College environment. Students developed critical thinking skills and an ability to organize their data analysis and develop a mental "big picture" of what is going on in the CG4 region. The NITARP program is one of several "Active Learning" programs going on at Pierce, and the other programs are briefly summarized in this poster as well. This program was made possible through the NASA/IPAC Teacher Archive Research Project (NITARP) and was funded by NASA Astrophysics Data Program and Archive Outreach funds.

Tatuagem, body piercing e a experiência da dor: emoção, ritualização e medicalização Tattoo, body piercing and the experience of pain: emotion, ritualization and medicalization

Directory of Open Access Journals (Sweden)

Vitor Sérgio Ferreira

2010-06-01

Full Text Available Configurando uma experiência física que desafia tabus físicos e sociais, a marcação do corpo através da tatuagem e body piercing tem sido bastante explorada no espaço público mediatizado em função das questões da dor voluntária e dos riscos de saúde individual e pública implicados. Ao pânico moral que já envolvia estas práticas, associadas a comportamentos tidos como socialmente desviantes, psico-patológicos ou criminosos, junta-se-lhes outra espécie de pânico social, o «pânico higienista», associado ao receio de contrair doenças infecto-contagiosas, ou de reagir aos materiais ou tintas encarnados. No sentido de ir além destes discursos, este artigo pretende analisar: por um lado, como os consumidores actuais de tatuagem e body piercing lidam com a dor que lhe está associada, que emoções enquadram essa sensação e que estratégias convocam no seu controlo; por outro lado, como é que os produtores de tatuagem e body piercing, perante novas e mais alargadas clientelas, lidam com exigência de disciplinas sanitárias na sua prática profissional. Em termos metodológicos, a informação empírica apresentada no artigo foi obtida em situação de entrevista em profundidade, de natureza biográfica, semi-estruturada na sua preparação e semi-diretiva na sua aplicação, a portadores de corpos multitatuados e multiperfurados, profissionais ou apenas consumidores de tatuagem e body piercing. Quinze entrevistados com diferentes perfis sociais foram recrutados em estúdios de tatuagem e body piercing de Lisboa e arredores, depois de intenso trabalho etnográfico nesses mesmos espaços.Being a physical experience that challenges sensitive and social taboos, body marking with tattoos and body piercing has been fairly explored in the public sphere regarding the issues of voluntary pain and the risks of individual and public health that are involved. Associated with the moral panic that is already linked to these practices

Satisfaction with life, self-esteem and evaluation of mental health in people with tattoos or piercings.

Science.gov (United States)

Pajor, Anna J; Broniarczyk-Dyła, Grażyna; Świtalska, Julita

2015-01-01

The aim of the study was to determine the level of life satisfaction and the various dimensions of self-esteem of pierced or tattooed people, and evaluate their mental health, compared to those without similar body modifications. The study was conducted on a sample of 449 people aged 16-58 years (mean age 26.7 ± 6.35), of whom 308 had body modifications: tattoo (n = 90), body piercings in places other than the ear lobe (n = 53), or both tattoos and piercings (n = 165). The control group consisted of 141 people without such modifications. The participants completed a questionnaire concerning their socio-demographic status, as well as the following psychological tests: The Satisfaction with Life Scale (SWLS), Multidimensional Self-Esteem Inventory (MSEI) and General Health Questionnaire (GHQ-28). Our findings show no significant differences in terms of life satisfaction between the group with tattoos or piercings and the control group. People with body modifications were characterized by higher self-esteem, with regard to their competence and leadership abilities. They also display fewer symptoms of social impairment and sleep disorders than the control group. Tattoos and piercings should not be considered as indicators of psychopathology.

A New Keyboard for the Bohlen-Pierce Scale

CERN Document Server

Nassar, Antonio

2011-01-01

The study of harmonic scales of musical instruments is discussed in all introductory physics texts devoted to the science of sound. In this paper, we present a new piano keyboard to make the so-called Bohlen-Pierce scale more functional and pleasing for composition and performance.

Prevalence and acceptance of tattoos and piercings: a survey of young adults from the southern German-speaking area of Central Europe.

Science.gov (United States)

Stieger, Stefan; Pietschnig, Jakob; Kastner, Cornelia K; Voracek, Martin; Swami, Viren

2010-06-01

The present study examined the prevalence and acceptance of body piercings and tattoos among a community sample from the southern German-speaking area of Central Europe. A total of 440 respondents completed information about their own body piercings and tattoos and reported whether they would be likely never to have piercings and tattoos in the future. Analyses indicated that 19.8 and 15.2% of respondents had piercings (excluding the earlobe) and tattoos, respectively. Women were more likely to have body piercings than men, but there were no sex differences in tattooing. There were also few sociodemographic differences in piercings and tattoos, and most participants reported being likely to consider body art in the future. These results are considered in relation to prevalence estimates of body art in other Western countries and the associated health risks.

Gingival recession is likely associated with tongue piercings.

Science.gov (United States)

Reynolds, Mark A

2012-09-01

A convenience sample of 60 subjects (27 male; 33 female) with tongue piercings (case group) and 120 subjects (43 male; 77 female) without tongue piercings (control group), ranging in age from 13 to 28 years, were identified from a mix of races living in a geographic area of low socioeconomic status in Brazil. Subjects were recruited from school groups and university centers between January 2008 and March 2009. For each case, 2 controls were selected on a consecutive basis from the same school according to criteria that included age, gender, smoking, and previous orthodontic treatment. Exclusion criteria included individuals with systemic diseases that might compromise the immune system, as well as antibiotics within 3 months or other medications that could affect the gingival tissues. The key study factor was the use or nonuse of tongue piercings (jewelry). The analysis compared periodontal parameters, such as the occurrence, location, and severity of gingival recession, in subjects with and without tongue jewelry. Gingival recession in the anterior lingual mandibular region was assessed as the primary outcome measure. The study sample was divided according to the presence or absence of gingival recession as well as the severity (1-2, 3, and ≥ 4 mm) of gingival recession. The average age of subjects was similar in the case and control groups (18.9 versus 17.7 years, respectively). Fractures of the anterior teeth were present significantly more frequently in cases than controls (26.7% versus 11.7%, respectively; P piercings (OR = 11.0, 95% confidence interval [CI] 5.02-24.09, P <.001). The severity of recession in this region was also significantly higher (calculated using an ordinal scale) in cases than in controls (P < .001). The final multivariate logistic regression model for occurrence of gingival recession included the variables tongue jewelry (yes/no), age, male gender, and the presence of bleeding on probing in the anterior region. Subjects with tongue

Medical tongue piercing – development and evaluation of a surgical protocol and the perception of procedural discomfort of the participants

Science.gov (United States)

2014-01-01

Background A system providing disabled persons with control of various assistive devices with the tongue has been developed at Aalborg University in Denmark. The system requires an activation unit attached to the tongue with a small piercing. The aim of this study was to establish and evaluate a safe and tolerable procedure for medical tongue piercing and to evaluate the expected and perceived procedural discomfort. Methods Four tetraplegic subjects volunteered for the study. A surgical protocol for a safe insertion of a tongue barbell piercing was presented using sterilized instruments and piercing parts. Moreover, post-procedural observations of participant complications such as bleeding, edema, and infection were recorded. Finally, procedural discomforts were monitored by VAS scores of pain, changes in taste and speech as well as problems related to hitting the teeth. Results The piercings were all successfully inserted in less than 5 min and the pain level was moderate compared with oral injections. No bleeding, infection, embedding of the piercing, or tooth/gingival injuries were encountered; a moderate edema was found in one case without affecting the speech. In two cases the piercing rod later had to be replaced by a shorter rod, because participants complained that the rod hit their teeth. The replacements prevented further problems. Moreover, loosening of balls was encountered, which could be prevented with the addition of dental glue. No cases of swallowing or aspiration of the piercing parts were recorded. Conclusions The procedure proved simple, fast, and safe for insertion of tongue piercings for tetraplegic subjects in a clinical setting. The procedure represented several precautions in order to avoid risks in these susceptible participants with possible co-morbidity. No serious complications were encountered, and the procedure was found tolerable to the participants. The procedure may be used in future studies with tongue piercings being a

REGULAR AND SPECIFIC FEATURES OF STRESSED AND DEFORMED STATE OF COMPOSITE MATERIAL WITH PIERCED OPENING

Directory of Open Access Journals (Sweden)

Yu. V. Vasilevich

2007-01-01

Full Text Available Mathematical model describing a dependence between deformations and stresses in the zone of prepreg piercing zone is given in the paper. Boundary conditions in the piercing zone in number of four functional dependences for prepregs can express either the given stresses or displacements, or describe boundary form, or express relations between stresses and displacements etc.

Instantaneous mechanical fastening of quasi-isotropic CFRP laminates by a self-piercing rivet

OpenAIRE

上田, 政人; 三宅, 崇太郎; 長谷川, 寛幸; 平野, 義鎭; Ueda, Masahito; Miyake, Sotaro; Hasegawa, Hiroyuki; Hirano, Yoshiyasu

2012-01-01

A modified self-piercing rivet (SPR) has been proposed to mechanically fasten CFRP laminates. The modified SPR consists of a rivet body and two flat washers. The two flat washers were used to suppress delamination in the CFRP laminates at the point of piercing. The advantages of the modified SPR for fastening CFRP laminates are instantaneous process time and low cost. Any pretreatments such as surface treatments or hole drilling are not required. In this study, the viability of the modified S...

Blanking and piercing theory, applications and recent experimental results

International Nuclear Information System (INIS)

Zaid, Adnan l O

2014-01-01

Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The abovementioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is alsogiven and discussed

The Development of Piezo-Driven Tools for Cellular Piercing

Directory of Open Access Journals (Sweden)

Changhai Ru

2016-10-01

Full Text Available Conventionally, intracytoplasmic sperm injection (ICSI in the mouse is conducted with piezo-drills that use a droplet of mercury for damping. The use of mercury causes concerns of toxicity and contamination. Although Fluorinert can be used as a substitute for mercury to reduce piezo-drill’s lateral vibration, the damping effect is not as satisfactory as mercury. In this work, a modified piezo-drill without using mercury was developed for the cellular piercing of mouse oocytes. Experimentally, appropriate parameters of driving voltage and frequency were obtained for the penetration of the zona pellucida of mouse oocytes. Furthermore, the lateral vibration of the injection pipette is lower than 1 μm in deionized water, which is not observable at 400 magnificence. With the piezo-drill without using mercury, the system performs the cellular piercing of mouse oocytes with a maximum cleavage rate of 94.7% (n = 117.

Pierce - University of Georgia | Division of Cancer Prevention

Science.gov (United States)

Principal Investigator: J. Michael Pierce, PhDInstitution: University of Georgia, Athens, GA Our project, Discovery and Development of Cancer Glycomarkers, is a joint collaboration between our laboratories at the CCRC, which include Karen Abbott, Lance Wells, Kevin Dobbin, and Mike Tiemeyer, those at TGen, in Phoenix, AZ, Daniel Von Hoff, Haiyong Han, and Mike Demeure, and

Dynamics of Pierce instability of hot electron beams

International Nuclear Information System (INIS)

Ignatov, A.M.; Novikov, V.N.

1986-01-01

On the base of a new method of numerical solution of the Vlasov equation evolution of complete function of electron distribution at the injection of hot electron beams into plasma bounded with electrodes is investigated. It is shown that despite the development of electrostatic instabilities in the system the currents can run substantially exceeding the Pierce critical current

Simulation of cylindrical Pierce diodes with radial flow

International Nuclear Information System (INIS)

Alves, M.V.; Gnavi, G.; Gratton, F.T.; Buenos Aires Univ.

1996-01-01

In this paper we study the electron instability and the non linear behaviour of cylindrical Pierce's diodes by particle simulation. We ignore here the ion contribution (ions are fixed at a 1/r density and given a very large mass) to give perspicuity to the electron dynamics, and to facilitate comparison with existing theory. (author). 8 refs., 10 figs

From body piercing to acute kidney injury – a case report

Directory of Open Access Journals (Sweden)

Irena Wikiera-Magott

2017-12-01

Full Text Available Acute kidney injury is an abrupt decline of renal function interfering with the body’s homeostasis. It most commonly occurs in neonates and children treated in intensive care units and undergoing extensive surgical procedures, especially cardiac surgery. Its aetiology is frequently complex, with infectious factors, toxic chemical activity and hydration and electrolyte imbalance occurring simultaneously and aggravating kidney injury. This study reports a case of a 17-year-old female patient in whom acute kidney injury was caused by a combination of factors, including sepsis, adverse effects of analgesic drugs and dehydration. Staphylococcus aureus infection caused by multiple-site piercings performed in a home setting resulted in the development of multiple skin abscesses, myometrial abscesses and a generalised infection. The patient’s condition warranted intensive antibiotic therapy and drainage of the myometrial abscesses. The therapy facilitated eradication of the infection foci and normalising renal function.

ANALYSIS OF THE MANAGEMENT SYSTEM IN THE FIELD OF ENVIRONMENTAL PROTECTION OF RUSSIAN CHEMICAL COMPANIES

Directory of Open Access Journals (Sweden)

Anna Makarov

2018-03-01

Full Text Available Since 2007, many chemical industrial companies in the Russian Federation have been actively involved in the Responsible Care® international voluntary program. To implement this program, vast bodies of data on environmental impact assessments needs to be collected. This allows us to analyse the environment-oriented trends in economic and social activities, and to record the achievements and problems in this field. The collected large bodies of data are in many cases heterogeneous, since the report has been a voluntary initiative. To analyse the existing trends in business processes, authors applied the methodology for system analysis of large bodies of data and used their own heuristic approximation algorithm for the treatment of accumulated data. This algorithm gives us the unique possibility of evaluating the performance of both individual chemical companies in the framework of the Responsible Care® program and the Russian chemical industry as a whole.

An efficient domain decomposition strategy for wave loads on surface piercing circular cylinders

DEFF Research Database (Denmark)

Paulsen, Bo Terp; Bredmose, Henrik; Bingham, Harry B.

2014-01-01

A fully nonlinear domain decomposed solver is proposed for efficient computations of wave loads on surface piercing structures in the time domain. A fully nonlinear potential flow solver was combined with a fully nonlinear Navier–Stokes/VOF solver via generalized coupling zones of arbitrary shape....... Sensitivity tests of the extent of the inner Navier–Stokes/VOF domain were carried out. Numerical computations of wave loads on surface piercing circular cylinders at intermediate water depths are presented. Four different test cases of increasing complexity were considered; 1) weakly nonlinear regular waves...

Blanking and piercing theory, applications and recent experimental results

International Nuclear Information System (INIS)

Zaid, A. I. O.

2013-01-01

Blanking and piercing are manufacturing processes by which certain geometrical shapes are sheared off a sheet metal. If the sheared off part is the one required, the processes referred to as blanking and if the remaining part in the sheet is the one required, the process is referred to as piercing. In this paper, the theory and practice of these processes are reviewed and discussed The main parameters affecting these processes are presented and discussed. These include: the radial clearance percentage, punch and die geometrical parameters, for example punch and die profile radii. The above mentioned parameters on the force and energy required to effect blanking together with their effect on the quality of the products are also presented and discussed. Recent experimental results together with photomacrographs and photomicrographs are also included and discussed. Finally, the effect of punch and die wear on the quality of the blanks is also given and discussed. (author)

The Pierce-diode approximation to the single-emitter plasma diode

International Nuclear Information System (INIS)

Ender, A. Ya.; Kuhn, S.; Kuznetsov, V. I.

2006-01-01

The possibility of modeling fast processes in the collisionless single-emitter plasma diode (Knudsen diode with surface ionization, KDSI) by means of the Pierce-diode is studied. The KDSI is of practical importance in that it is an almost exact model of thermionic energy converters (TICs) in the collisionless regime and can also be used to model low-density Q-machines. At high temperatures, the Knudsen TIC comes close to the efficiency of the Carnot cycle and hence is the most promising converter of thermal to electric energy. TICs can be applied as component parts in high-temperature electronics. It is shown that normalizations must be chosen appropriately in order to compare the plasma characteristics of the two models: the KDSI and the Pierce-diode. A linear eigenmode theory of the KDSI is developed. For both nonlinear time-independent states and linear eigenmodes without electron reflection, excellent agreement is found between the analytical potential distributions for the Pierce-diode and the corresponding numerical ones for the KDSI. For the states with electron reflection, the agreement is satisfactory in a qualitative sense. A full classification of states of both diodes for the regimes with and without electron reflection is presented. The effect of the thermal spread in electron velocities on the potential distributions and the (ε,η) diagrams is analyzed. Generally speaking, the methodology developed is usefully applicable to a variety of systems in which the electrons have beam-like distributions

Cis-12-oxo-phytodienoic acid stimulates rice defense response to a piercing-sucking insect.

Science.gov (United States)

Guo, Hui-Min; Li, Hai-Chao; Zhou, Shi-Rong; Xue, Hong-Wei; Miao, Xue-Xia

2014-11-01

The brown planthopper (BPH, Nilaparvata lugens) is a destructive, monophagous, piercing-sucking insect pest of rice. Previous studies indicated that jasmonic acid (JA) positively regulates rice defense against chewing insect pests but negatively regulates it against the piercing-sucking insect of BPH. We here demonstrated that overexpression of allene oxide cyclase (AOC) but not OPR3 (cis-12-oxo-phytodienoic acid (OPDA) reductase 3, an enzyme adjacent to AOC in the JA synthetic pathway) significantly increased rice resistance to BPH, mainly by reducing the feeding activity and survival rate. Further analysis revealed that plant response to BPH under AOC overexpression was independent of the JA pathway and that significantly higher OPDA levels stimulated rice resistance to BPH. Microarray analysis identified multiple candidate resistance-related genes under AOC overexpression. OPDA treatment stimulated the resistance of radish seedlings to green peach aphid Myzus persicae, another piercing-sucking insect. These results imply that rice resistance to chewing insects and to sucking insects can be enhanced simultaneously through AOC-mediated increases of JA and OPDA and provide direct evidence of the potential application of OPDA in stimulating plant defense responses to piercing-sucking insect pests in agriculture. © The Author 2014. Published by the Molecular Plant Shanghai Editorial Office in association with Oxford University Press on behalf of CSPB and IPPE, SIBS, CAS.

Piercing and Tattoos in Adolescents: Legal and Medico-legal Implications.

Science.gov (United States)

Conti, Adelaide; Bin, Paola; Casella, Claudia; Capasso, Emanuele; Fedeli, Piergiorgio; Salzano, Francesco Antonio; Terracciano, Lucia; Piras, Mauro

2018-01-01

Non-therapeutic body modification interventions are permitted within the limits of the use of one's own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents. In Italy, several regions have therefore issued acts aimed at regulating the activities of tattoo and piercing also in reference to minors. Discussion. With regard to minors, the rules taken into account set precise limits in relation to the age criterion and subordinate the implementation of such practices to the provision of consent by legal representatives. If such practices are of an aesthetic nature, we cannot avoid considering the implications they have on health protection, and then adopt appropriate measures to protect the person who intends to undergo them, particularly in the case of minors.

Piercing and Tattoos in Adolescents: Legal and Medico-legal Implications

Science.gov (United States)

Conti, Adelaide; Bin, Paola; Casella, Claudia; Capasso, Emanuele; Fedeli, Piergiorgio; Salzano, Francesco Antonio; Terracciano, Lucia; Piras, Mauro

2018-01-01

Abstract Non-therapeutic body modification interventions are permitted within the limits of the use of one’s own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents. Results In Italy, several regions have therefore issued acts aimed at regulating the activities of tattoo and piercing also in reference to minors. Discussion. With regard to minors, the rules taken into account set precise limits in relation to the age criterion and subordinate the implementation of such practices to the provision of consent by legal representatives. Conclusion If such practices are of an aesthetic nature, we cannot avoid considering the implications they have on health protection, and then adopt appropriate measures to protect the person who intends to undergo them, particularly in the case of minors. PMID:29675481

Characteristics of typical Pierce guns for PPM focused TWTs

International Nuclear Information System (INIS)

Harper, R.; Puri, M.P.

1989-01-01

The performance of typical moderate perveance Pierce type electron guns which are used in periodic permanent magnet focused traveling wave tubes are described with regard to adaptation for use in electron beam ion sources. The results of detailed electron trajectory computations for one particular gun design are presented

Theory and Examples of Mathematical Modeling for Fine Weave Pierced Fabric

Directory of Open Access Journals (Sweden)

ZHOU Yu-bo

2017-04-01

Full Text Available A mathematical abstraction and three-dimensional modeling method of three-dimensional woven fabric structure was developed for the fine weave pierced fabric, taking parametric continuity splines as the track function of tow. Based on the significant parameters of fine weave pierced fabric measured by MicroCT, eight kinds of the three-dimensional digital models of the fabric structure were established with two kinds of tow sections and four kinds of tow trajectory characteristic functions. There is a good agreement between the three-dimensional digital models and real fabric by comparing their structures and porosities. This mathematical abstraction and three-dimensional modeling method can be applied in micro models for sub unit cell and macro models for macroscopic scale fabrics, with high adaptability.

Psychosocial Adjustment of College Students with Tattoos and Piercings

Science.gov (United States)

Roberti, Jonathan W.; Storch, Eric A.

2005-01-01

The purpose of this study was to examine the association between body modification practices and psychosocial adjustment. Participants were 198 undergraduate college students, 129 of whom had I or more piercings (other than in earlobe) or tattoos. Findings showed that individuals with body modifications reported more symptoms of depression and…

Atlantic Richfield Hanford Company chemical operator training program

International Nuclear Information System (INIS)

Zumhoff, R.G.

1975-01-01

Formal training and testing of Chemical Operators at Hanford were initiated as part of a negotiated union settlement in 1966. Consequently, it was agreed that 25 percent of the chemical operator force would receive a higher rated job (Lead Nuclear Chemical Operator) provided they satisfactorily completed a training program including testing. The training and testing program was developed in two parts. The first covered subjects of a general nature and was applicable to an operator's duties no matter what the assignment. Part II was more specifically oriented to the presently assigned work area. Renewed interest in retraining and requalification of all chemical operators was taken in 1971. This evolved from a Company concern that a program be developed to assure the fact that operators were qualified to do their assigned jobs, and an Atomic Energy Commission request for an outline of a retraining and requalification program for chemical operators. Building upon the experience gained in the LNCO (Lead Nuclear Chemical Operator) program, the two part format is retained. The use of video tapes is used to complement the manuals. An arrangement where an operator can view a lecture-type presentation is provided in seven plant locations. A small studio for in-house production of the video tapes is available to the training Specialists. A script is developed from a training manual by condensing the information into 20-minute presentations. A prime objective of each tape is to highlight the safety and control aspects that accompany operator responsibilities in each of these areas. Testing is also handled on a two part basis; one test covers the fundamentals and a separate test is designed for each of the plant subjects. A walk-through examination is also performed for the plant portion. Operators are required to be requalified on emergency procedures on an annual basis and at two-year intervals in the other areas. (U.S.)

Riscos e complicações do uso de piercing oral: uma revisão sistemática

Directory of Open Access Journals (Sweden)

José Wittor de Macêdo Santos

2017-02-01

Full Text Available Introdução: O uso de piercing oral tem despertado o interesse dos profissionais da Odontologia devido à associação com diversas complicações locais e sistêmicas. Objetivo: Este trabalho objetivou realizar uma revisão sistemática da literatura sobre riscos e complicações associadas ao uso de piercings orais e periorais. Métodos: Foi realizada uma pesquisa nas bases de dados MEDLINE, Google acadêmico e LILACS utilizando-se os seguintes critérios: artigos publicados na íntegra, no período de 2000 a 2016, em inglês, português e espanhol, case report, classical articles e reviews sobre o tema utilizando os seguintes descritores: body piercing, risks management, complications, risk e seus mesh terms. Resultados: Foram incluídos um total de 39 artigos relevantes que cumpriam com todos os critérios. Foi observado que os locais mais frequentemente utilizados para a colocação de piercing oral são os lábios e a língua. As complicações incluem inflamação, infecções locais e sistêmicas, lesões mucocutâneas, lesões vasculares, trauma dental, problemas periodontais, reações de hipersensibilidade, disfonia, deglutição e aspiração do piercing, e até morte etc. Conclusão: Conclui-se que o cirurgião dentista deve exercer um papel importante na orientação da população em geral sobre os riscos e as complicações associadas ao uso de piercing oral, visando evitar tal prática ou minimizar ao máximo os riscos e as complicações naqueles indivíduos que os possuem.

Prevention of gingival trauma : Oral hygiene devices and oral piercings

NARCIS (Netherlands)

Hoenderdos, N.L.

2017-01-01

Maintaining healthy teeth and soft oral tissues for life is important. Oral hygiene devices and oral piercings can damage the soft oral tissues. This thesis investigates the safety of manual toothbrushes, interdental brushes and rubber bristles interdental cleaners by analysing the gingival abrasion

Speckle Interferometry with the McMath-Pierce East Auxiliary Telescope

Science.gov (United States)

Harshaw, Richard; Ray, Jimmy; Douglass, David; Prause, Lori; Genet, Russell

2015-09-01

Engineering runs and tests on the McMath-Pierce 0.8 meter East Auxiliary telescope successfully configured the telescope for speckle interferometry observations of close visual double stars. This paper reports the procedure and results of the speckle analysis of four double stars.

[Development of public health regulations for tattooing and piercing and their realization].

Science.gov (United States)

Zolondek, U; Stelling, R; Hohmann, H

1998-03-01

In the course of prevention of infectious diseases the Public Health office of the city of Bremen has made increase efforts to improve hygienic conditions in tattoo and piercing studios. Defined and practicable hygienic standards have been developed and formulated for and in cooperation with the studios. Supported by intense personal counselling of the studios the hygienic standards are now--after 6-9 months--widely accepted and increasingly observed in practice. This programme has been--as a crucial point--supplemented by intense information for the general public and the customers of the studios in order to support (and control) the practice of hygienic standards in tattooing and piercing also from this point of view.

Piercing and tattoos in adolescents: legal and medico-legal implications

Directory of Open Access Journals (Sweden)

Conti Adelaide

2018-04-01

Full Text Available Non-therapeutic body modification interventions are permitted within the limits of the use of one’s own body that can be specified in the legal system. The authors take into consideration Italian regulation on tattooing and piercing, in particular in relation to adolescents.

The current status of immunotoxins: an overview of experimental and clinical studies as presented at the Third International Symposium on Immunotoxins.

Science.gov (United States)

Uckun, F M; Frankel, A

1993-02-01

The Third International Symposium on Immunotoxins was held on June 19-21, 1992 in Orlando, Florida. This symposium was sponsored by NATO, NIH, Pierce Chemical Company, Walt Disney Cancer Institute at Florida Hospital, Duke Comprehensive Cancer Center, Xoma, Immunogen, Seragen, Bristol-Myers Squibb, Chiron, Ortho Biotech, Upjohn, Merck Sharp & Dohme Research Laboratories, Abbot Laboratories, Lilly Research Laboratories, and Evans & Sutherland. The Pierce Immunotoxin Award which recognizes outstanding contributions to immunotoxin research and development, was presented to Drs David FitzGerald, Fatih Uckun, David Eisenberg, and Ira Wool, for their contributions to the immunotoxin field.

Failure of aluminium self-piercing rivets: An experimental and numerical study

International Nuclear Information System (INIS)

Hoang, N.-H.; Hopperstad, O.S.; Langseth, M.; Westermann, I.

2013-01-01

Highlights: ► We investigated the fracture mechanism of AA7278-T6 aluminium self-piercing rivets. ► Fracture of AA 7278-T6 rivets during the riveting process is a complex phenomenon. ► Microstructure of AA7278-T6 has significant influence on the fracture mechanism. ► Increasing friction will change the deformation mode of the rivet. - Abstract: The present paper investigates the fracture mechanisms of AA7278-T6 aluminium self-piercing rivets under compression during the riveting process. First, a microstructure investigation was conducted to disclose the grain structure and the particle distribution of the extruded aluminium alloy. Transmission electron micrographs revealed precipitate free zones along grain boundaries. Uniaxial tensile tests in three different directions with respect to the extrusion direction revealed anisotropy of the alloy in strength and ductility and a change in fracture mode with tensile direction. The behaviour of the alloy under compression was studied experimentally using upsetting tests and self-piercing riveting tests. Micrographs of the deformed specimens provided insight into the influence of the microstructure on the deformation and fracture of the alloy under compression. Second, numerical analyses were carried out using a 2-D axisymmetric model in LS–DYNA in an attempt to investigate the role of different physical variables on the final failure of the rivet. The numerical results revealed that constituent particles, precipitate free zones, and friction between the rivet and plates are important for strain localisation and fracture in the rivet

Effect of Managerial Ownership, Free Cash Flow and Size Company Policy on Debt (Empirical Study on Industrial Enterprises Basic and Chemicals Listed in Bei)

OpenAIRE

Hasan, Mudrika Alamsyah

2013-01-01

The purpose of this study was to obtain empirical evidence about the effect of managerial ownership structure, free cash flow and the size of the companys debt policy the Basic Industry and Chemicals companies listed on the Stock Exchange.The population in this research is the basic chemical sector companies listed on the Indonesia Stock Exchange during the last three years, is from the years 2009-2011, amounting to 43 companies, using purposive sampling and the sampling results obtained by 3...

Comparative analysis of the tardigrade feeding apparatus: adaptive convergence and evolutionary pattern of the piercing stylet system

Directory of Open Access Journals (Sweden)

Roberto Guidetti

2013-03-01

Full Text Available A thorough analysis of the cuticular parts of tardigrade feeding apparatuses was performed in order to provide a more complete understanding of their evolution and their potential homologies with other animal phyla (e.g. Cycloneuralia and Arthropoda. The buccal- pharyngeal apparatuses of eight species belonging to both Eutardigrada and Heterotardigrada were studied using light and scanning electron microscopy. This study supports and completes a previous study on the relationships between form and function in the buccalpharyngeal apparatus of eutardigrades. The common sclerified structures of the tardigrade buccal-pharyngeal apparatus are: a buccal ring connected to a straight buccal tube, a buccal crown, longitudinal thickenings within the pharynx, and a stylet system composed of piercing stylets within stylet coats, and stylet supports. Specifically, heterotardigrades (Echiniscoidea have a narrow buccal tube; long piercing stylets, each with a longitudinal groove, that cross one another before exiting the mouth; pharyngeal bars and secondary longitudinal thickenings within the pharynx. In contrast, eutardigrades have stylets which are shorter than the buccal tube; Parachela have pharyngeal apophyses and placoids within the pharynx, while Apochela lack a buccal crown and cuticular thickenings within the pharynx, the buccal tube is very wide, and the short stylets are associated with triangular-shaped stylet supports. In both classes, when the piercing stylet tips emerge from the mouth to pierce food, the buccal tube opening is almost completely obstructed, which may hinder food uptake. In heterotardigrades, the crossing of the piercing stylets may further decrease food uptake, however this disadvantage may have been reduced in echiniscids by the evolution of a long buccal tube and long stylets able to run more parallel to the buccal tube. In contrast, eutardigrades evolved different strategies. In the order Apochela and in several

Experimental investigation of piercing of high-strength steels within a critical range of slant angle

Science.gov (United States)

Senn, S.; Liewald, M.

2017-09-01

Deep drawn parts often do have complex designs and, therefore, must be trimmed or punched subsequently in a second stage. Due to the complex part geometry, most punching areas do reveal critical slant angle (angle between part surface and ram movement direction) different to perpendicular direction. Piercing within a critical range of slant angle may lead to severe damage of the cutting tool. Consequently, expensive cam units are required to transform the ram moving direction in order to perform the piercing process perpendicularly to the local part surface. For modern sheet metals, however, the described critical angle of attack has not been investigated adequately until now. Therefore, cam units are used in cases in which regular piercing with high slant angle wouldn’t be possible. Purpose of this study is to investigate influencing factors and their effect on punch damage during piercing of high strength steels with slant angles. Therefore, a modular shearing tool was designed, which allows to simply switch die parts to vary cutting clearance and cutting angle. The target size of the study is to measure the lateral deviation of the punch which is monitored by an eddy current sensor. The sensor is located in the downholder and measures the lateral punch deviation in-line during manufacturing. The deviation is mainly influenced by slant angle of workpiece surface. In relation to slang angle and sheet thickness the clearance has a small influence on the measured punch deflection.

Tattooing, permanent makeup and piercing in Amsterdam; guidelines, legislation and monitoring

NARCIS (Netherlands)

Worp, J.; Boonstra, A.; Coutinho, R. A.; van den Hoek, J. A. R.

2006-01-01

Tattooing, body piercing and permanent makeup are increasing in popularity. Here, we describe the procedures involved in these practices, their risks, the content of guidelines developed by the Municipal Health Service in Amsterdam (the Netherlands) to reduce infection risks, the legislation in the

Influence of rivet to sheet edge distance on fatigue strength of self-piercing riveted aluminium joints

OpenAIRE

Li, Dezhi; Han, Li; Thornton, Martin; Shergold, Mike

2012-01-01

Self-piercing riveting (SPR) is one of the main joining methods for lightweight aluminium automotive body structures due to its advantages. In order to further optimise the structure design and reduce the weight but without compromising strength, reduction of redundant materials in the joint flange area can be considered. For this reason, the influence of rivet to sheet edge distance on the fatigue strengths of self-piercing riveted joints was studied. Five edge distances, 5 mm, 6 mm, 8 mm, 1...

Analysis of Ventilation Regimes of the Oblique Wedge-Shaped Surface Piercing Hydrofoil During Initial Water Entry Process

Directory of Open Access Journals (Sweden)

Ghadimi Parviz

2018-03-01

Full Text Available The suction side of a surface piercing hydrofoil, as a section of a Surface Piercing Propeller (SPP, is usually exposed to three phases of flow consisting air, water, and vapour. Hence, ventilation and cavitation pattern of such section during the initial phase of water entry plays an essential role for the propeller’s operational curves. Accordingly, in the current paper a numerical simulation of a simple surface piercing hydrofoil in the form of an oblique wedge is conducted in three-phase environment by using the coupled URANS and VOF equations. The obtained results are validated against water entry experiments and super-cavitation tunnel test data. The resulting pressure curves and free surface profiles of the wedge water entry are presented for different velocity ratios ranging from 0.12 to 0.64. Non-dimensional forces and efficiency relations are defined in order to present the wedge water entry characteristics. Congruent patterns are observed between the performance curves of the propeller and the wedge in different fully ventilated or partially cavitated operation modes. The transition trend from fully ventilated to partially cavitated operation of the surface piercing section of a SPP is studied and analyzed through wedge’s performance during the transitional period.

El uso del piercing en la cavidad bucal de adolescentes

Directory of Open Access Journals (Sweden)

Mercedes Haces Acosta

2014-04-01

Full Text Available Introducción: el uso del piercing intraoral en los adolescentes constituye una amenaza para la salud bucal. Objetivo: caracterizar el uso del piercing en la cavidad bucal de los adolescentes desde el punto de vista clínico y epidemiológico. Material y método: se realizó un estudio descriptivo transversal en el policlínico Dr. "Modesto Gómez Rubio" del municipio San Juan y Martínez, Pinar del Río, en el período comprendido de septiembre del 2011 a enero del 2013. El universo estuvo conformado por 400 adolescentes que acudieron al servicio del policlínico de los cuales 250 constituyeron la muestra, seleccionada a través del método aleatorio simple. Se les realizó el examen bucal, como medida de resumen se utilizaron el número absoluto y el porcentaje. Resultados: se pudo constatar que de 250 adolescentes examinados 34 presentaban perforaciones intraorales para un 13,6%, de ellos 24 son masculinos para un 70,59% y 10 femeninas representando el 29,41%, la edad de mayor uso de 15 y 18 años con 31 para un 21,85, los efectos nocivos de mayor frecuencia la gingivitis crónica con el 52,94% , seguidas por las fracturas dentarias con el 47,06%, el 97% respondieron que su motivación era la moda. Conclusiones: el uso del piercing en la cavidad bucal de los adolescentes estudiados se caracteriza por manifestarse con mayor frecuencia en las edades entre 15 y 18 años, con predominio del sexo masculino y el efecto nocivo más frecuente la enfermedad gingivitis crónica, seguidas por las fracturas dentarias, motivación la moda.

Online visual inspection of self-piercing riveting to determine the quality of the mechanical interlock

International Nuclear Information System (INIS)

Johnson, P; Cullen, J D; Al-Shamma'a, A I; Shaw, A

2007-01-01

Self-piercing riveting (SPR) has become a significant joining technique for the automotive applications of aluminium sheets. Quality control in this locale has progressed at an altogether more leisurely rate than other areas of mechanical joining (e.g. spotweld) and is underdeveloped. Testing the quality mechanical interlock is often achieved by destructive testing, which results in material and time wastage. The solution is online monitoring of the self-piercing riveting process to provide non-destructive testing of the mechanical interlock. Introducing sensors into the process facilitates real time data acquisition, which can be used to determine the quality of the joint

Tungsten versus depleted uranium for armour-piercing penetrators

International Nuclear Information System (INIS)

Johnson, P.K.

1983-01-01

Tungsten alloys have been widely used in the production of armour-piercing (AP) penetrators for defense purposes for the past 40 years. In recent years, however, depleted uranium (DU) has also been utilised for this application. Both materials exhibit high density and strength, two properties necessary for kinetic-energy projectiles to penetrate armour on tanks and other vehicles. The facts, however, support the view that tungsten can and should be utilised as the primary material for most armour-defeating ordnance applications. (author)

Tattoos and piercings: a review for the emergency physician.

Science.gov (United States)

Urdang, Michael; Mallek, Jennifer T; Mallon, William K

2011-11-01

Tattoos and piercings are increasingly part of everyday life for large sections of the population, and more emergency physicians are seeing these body modifications (BM) adorn their patients. In this review we elucidate the most common forms of these BMs, we describe how they may affect both the physical and psychological health of the patient undergoing treatment, and also try to educate around any potential pitfalls in treating associated complications.

Web-Based Implementation of E-Marketing to Support Product Marketing of Chemical Manufacturing Company

Directory of Open Access Journals (Sweden)

Riswan Efendi Tarigan

2015-10-01

Full Text Available Currently, many company’s marketing strategies are limited only to face-to-face communication, telephone, facsimile, company portfolio, and product brochures. However, those marketing strategies are well- known to have limited impacts. Therefore, the presence of e-marketing as one of the marketing strategies would be appropriate to cover the weaknesses and to solve a number of the marketing problems. The purpose of this study is to discuss matters related to marketing, such    as, proposing a marketing plan using website, expanding marketing segment, and introducing existing  products for a chemical manufacturing company. The adopted research method is a descriptive method where the study is directly performed on the research object to acquire necessary data. The collected data are further analyzed using the Porter’s Five Force and SWOT analysis. Fi- nally, the work provides a number of recommendations for implementing e-marketing strategies to support the company business.

Pierce-type dispersion relation for an intense relativistic electron beam interacting with a slow-wave structure

International Nuclear Information System (INIS)

Chen, C.

1994-01-01

A Pierce-type dispersion relation is derived for the interaction of an intense relativistic electron beam with a cylindrical slow-wave structure of arbitrary corrugation depth. It is shown that near a resonance, the Pierce parameter can be expressed in terms of the vacuum dispersion function and the beam current. The dispersion relation is valid in both the low-current (Compton) regime and the high-current (Raman) regime. The dispersion characteristics of the interaction, such as the linear instability growth rate and bandwidth, are analyzed for both regimes

Pierce gain analysis for a sheet beam in a rippled waveguide traveling-wave tube

International Nuclear Information System (INIS)

Carlsten, Bruce E.

2001-01-01

A Pierce-type mode analysis is presented for a planar electron beam in a rippled planar waveguide. This analysis describes the gain of a traveling-wave tube consisting of that geometry. The dispersion relation is given by the determinant of a matrix based on the coupling of different free-space modes through the boundary conditions. For the case of high-frequency, low-power amplifiers, the dispersion relation reduces to a simple cubic expression for the Compton regime, leading to three roots analogous to the Pierce solution of a standard traveling-wave tube. The analysis shows that this type of traveling-wave tube is capable of very high gain at extremely high frequencies

Teaching Business Law from Literature: Lessons to Be Learned from the Novel "Mildred Pierce" and the Road to Entrepreneurial Success

Science.gov (United States)

Labatt, Joseph; Forrest, Michael

2016-01-01

James M. Cain used his literary skills to incorporate business and business law concepts into a best-selling novel, "Mildred Pierce." Set in the Great Depression era, "Mildred Pierce" tells the story of a divorced woman who raises two daughters on her own, while building a restaurant and bakery business. Even in today's popular…

Characterization of Coatings on Steel Self-Piercing Rivets for Use with Magnesium Alloys

Science.gov (United States)

McCune, Robert C.; Forsmark, Joy H.; Upadhyay, Vinod; Battocchi, Dante

Incorporation of magnesium alloys in self-pierce rivet (SPR) joints poses several unique challenges among which are the creation of spurious galvanic cells and aggravated corrosion of adjacent magnesium when coated steel rivets are employed. This work firstly reviews efforts on development of coatings to steel fasteners for the diminution of galvanic corrosion when used with magnesium alloys. Secondly, approaches, based on several electrochemical methods, for the measurement of the galvanic-limiting effect of a number of commercially-available coatings to hardened 10B37 steel self-piercing rivets inserted into alloy couples incorporating several grades of magnesium are reported. Electrochemical impedance spectroscopy (EIS), zero-resistance ammeter (ZRA), corrosion potential and potential-mapping visualization methods (e.g. scanning vibrating electrode technique — SVET) are illustrated for the several rivet coatings considered.

["My body belongs to me"--cultural history and psychology of piercings and tattoos].

Science.gov (United States)

Stirn, A

2007-02-01

At present tattoos and piercings can no longer be regarded as destructive acts of self mutilation practized by fringe groups. Body modifications (BMs) are found in virtually all preindustrial cultures and have their roots in ancient myths and magical rituals. The prevalence of tattoos and piercings in the German population is 8.5% and 6.8%, respectively. Unemployed young men and young women who do not live in a firm partnership show particularly high prevalences. The incidence of BMs correlates positively with the personality trait "sensation seeking", particularly in young women. BMs often serve to express individuality and identity, and they also reflect changed attitude towards the human body and body art as well as following fashion trends. However, BMs can also provide valuable diagnostic indications for identity search and risk taking behaviour.

Tattoos and Piercings: A Review for the Emergency Physician

Science.gov (United States)

Urdang, Michael; Mallek, Jennifer T; Mallon, William K

2011-01-01

Tattoos and piercings are increasingly part of everyday life for large sections of the population, and more emergency physicians are seeing these body modifications (BM) adorn their patients. In this review we elucidate the most common forms of these BMs, we describe how they may affect both the physical and psychological health of the patient undergoing treatment, and also try to educate around any potential pitfalls in treating associated complications. PMID:22224126

The classical Pierce diode: Using particle simulations on linear and nonlinear behavior and final states

International Nuclear Information System (INIS)

Crystal, T.L.; Kuhn, S.; Birdsall, C.K.

1984-01-01

The classical Pierce diode is a simple 1-d system of two shorted metal plates, a cold beam of electrons injected from one side and a neutralizing background of rigid ions. While the plasma medium is technically stable, the finiteness of the Pierce system allows stable and unstable operation. It is usefully studied as an archetypical bounded plasma system, related e.g., to Q-machines, particle accelerators, thermionic converters. New particle simulations of the Pierce diode have successfully recovered many novel linear phenomena including the dominant linear eigenmodes (seen in the internal electrostatic fields), and the dominant and subdominant eigenfrequencies, (seen both in the internal electrostatics and in the external circuit current, J/sub ext/(t)). These simulation results conform very well to detailed predictions of a new linear analysis. The final (nonlinear) state recovered can show critical dependence on initial (linear perturbation) conditions, and can be made steady-state (d.c.) or periodic-oscillatory by simply changing the initial conditions by a factor of 10/sup -4/ or less. A third class of final state is also possible which has oscillations which seem to be nonperiodic

College students with tattoos and piercings: motives, family experiences, personality factors, and perception by others.

Science.gov (United States)

Forbes, G B

2001-12-01

The motives, family experiences, and personality characteristics of 341 college students with and without tattoos or piercings were studied. Participants completed Lippa's 1991 measures of the Big Five personality factors, a shortened version of the Body Cathexis Scale, a series of questions about their childhood experiences, and questions about risk-taking behaviors. In addition, reasons to have or not have body modifications and the perceptions of people with body modifications were investigated. Of the 116 men and 186 women, 25% and 33%, respectively, had at least one tattoo or body piercing. There were very few differences in the childhood experiences or personality characteristics of people with or without body modifications. Although people with body modifications did not differ from people without modifications on the Big Five personality measures, people without modifications perceived people with modifications as much different from themselves on these measures. These results indicate that tattoos and piercings in college students are associated with significantly more risk-taking behavior, greater use of alcohol and marijuana, and less social conformity. However, the traditional stereotype that body modifications are indicators of social or personal pathology does not describe contemporary college students.

To the theory of the Pierce instability of neutralized electron flows

International Nuclear Information System (INIS)

Ignatov, A.M.; Rukhadze, A.A.

1984-01-01

The Pierce instability of a nonrelativistic electron beam in an exernal fi inite magnetic field is investigated. Analytical expressions for a critical electron density in limiting cases of strong or weak magnetic field have been fo ound. The critical electron density is shown to increase with a decrease in the magnetic field strength

Complications of oral and peri-oral piercings: a summary of case reports

NARCIS (Netherlands)

Hennequin-Hoenderdos, N.L.; Slot, D.E.; van der Weijden, G.A.

2011-01-01

Objective: To systemically search the literature for case reports concerning adverse effects associated with oral and peri-oral piercings on oral health and/or general health. Material and methods: MEDLINE and the Cochrane Central Register of Controlled Trials (CENTRAL) were searched up through 1

27 CFR 478.37 - Manufacture, importation and sale of armor piercing ammunition.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Manufacture, importation... COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.37 Manufacture, importation and sale of armor piercing ammunition. No person shall manufacture or import, and no manufacturer...

Body art in adolescents: paint, piercings, and perils.

Science.gov (United States)

Desai, Neerav A; Smith, Michael L

2011-04-01

Tattoos and body piercings are becoming increasingly popular, particularly in adolescents and young adults. As the frequency of body art increases, so does the potential for adverse outcomes. Reasons for obtaining body art include need for individual expression and peer support. Techniques for tattooing are advancing, along with development of newer inks that may be less reactive. When patients become tired of their body art, or develop complications from the art itself, removal needs to be considered. Newer laser modalities may provide tattoo removal options with less scarring potential.

Pierced Lasso Bundles are a new class of knot-like motifs.

Directory of Open Access Journals (Sweden)

Ellinor Haglund

2014-06-01

Full Text Available A four-helix bundle is a well-characterized motif often used as a target for designed pharmaceutical therapeutics and nutritional supplements. Recently, we discovered a new structural complexity within this motif created by a disulphide bridge in the long-chain helical bundle cytokine leptin. When oxidized, leptin contains a disulphide bridge creating a covalent-loop through which part of the polypeptide chain is threaded (as seen in knotted proteins. We explored whether other proteins contain a similar intriguing knot-like structure as in leptin and discovered 11 structurally homologous proteins in the PDB. We call this new helical family class the Pierced Lasso Bundle (PLB and the knot-like threaded structural motif a Pierced Lasso (PL. In the current study, we use structure-based simulation to investigate the threading/folding mechanisms for all the PLBs along with three unthreaded homologs as the covalent loop (or lasso in leptin is important in folding dynamics and activity. We find that the presence of a small covalent loop leads to a mechanism where structural elements slipknot to thread through the covalent loop. Larger loops use a piercing mechanism where the free terminal plugs through the covalent loop. Remarkably, the position of the loop as well as its size influences the native state dynamics, which can impact receptor binding and biological activity. This previously unrecognized complexity of knot-like proteins within the helical bundle family comprises a completely new class within the knot family, and the hidden complexity we unraveled in the PLBs is expected to be found in other protein structures outside the four-helix bundles. The insights gained here provide critical new elements for future investigation of this emerging class of proteins, where function and the energetic landscape can be controlled by hidden topology, and should be take into account in ab initio predictions of newly identified protein targets.

Occupational accidents with piercing and cutting instruments in hospital nurses

OpenAIRE

Maria Helena Palucci Marziale; Maria Lúcia Carmo Cruz Robazzi

2004-01-01

Goals: To identify factors associated with occupational accidents caused by piercing and cutting instruments and to identify the consequences of these accidents.Methods: Descriptive field research. Data were obtained through semi-structured interviews with nurses who suffered accidents during one year in four hospitals at São Paulo State - Brazil. Results: factors associated with accidents were: work overload, poor quality material, inadequate disposal materials, professional negligence, clie...

Clinical research of the obstructive interface morphology of the inferior vena cava and the method of choice for taking the 'pierce membrane'

International Nuclear Information System (INIS)

Wei Ning; Zu Maoheng; Xu Hao; Gu Yuming; Li Guojun; Zhang Qingqiao; Xu Wei; Liu Hongtao

2008-01-01

Objective: To evaluate the relation between the morphology of the obstructive interface of the inferior vena cava (IVC)and the method of choice for taking the 'pierce membrane'. Methods: Interventional therapy was performed in 155 patients with obstruction of inferior vena cave during 2003-2005. The types of proximal part and distal end of obstruction were classified on the base of inferior vane cavography and divid[d into two groups accordingly. The principle of taking 'pierce membrane' whether as accending or descending route was decided by the morphology of the obstructive interface. The complication rates of taking 'pierce membrane' were compared between the two groups including one of 2003-2005 and another of 1990 -1997 as the control. Results: 155 cases were classified to 7 types according to morphology of inferior vena cava obstruction of the distal interface, the type of membrane with hole (32 cases), the dome type (50 cases), the taper type (17 cases), the horizontal type (13 cases), the inclination type (10 cases), the irregular type (19 eases)and the type of obstruction with communicating branches (14 cases). The morphologies of the proximal part of the obstruction were mainly divided into the type of membrane with hole, dome type, taper type and horizontal type. All the cases were successfully taken 'pierce membrane', without complication of pericardial effusion and abdominal bleeding. In control group of 150 Budd-Chiari syndrome cases with obstruction of inferior vena cava, the complications of taking 'pierce membrane' included mis puncture into pericardium (16 cases) and abdominal hemorrhage because of rupturing the inferior vena cava in 2 cases. Comparing the two groups, there was statistical significance with severe complications. Conclusions: 'Pierce membrane' interventional technique for the obstruction of inferior vena eava by coinciding the morphology of the obstructive interface with suitable piercing direction can not only raise successful

The role of neutron activation analysis at The Dow Chemical Company

International Nuclear Information System (INIS)

Rigot, W.L.; Buchmann, M.E.; Quinn, T.J.; Romick, J.D.; Yusuf, S.O.

2000-01-01

The role of neutron activation analysis (NAA) at The Dow Chemical Company has not changed significantly since the first operations, which were conducted in July, 1967. That role is threefold; provide results with appropriate precision, accuracy and sensitivity; provide results in a timely manner; and provide results for a reasonable cost. What has changed, are the requirements for satisfying each of the three components of the role. In a business-focused environment, analyses need to be performed faster with better sensitivity and/or precision and be more cost efficient. In order to meet these requirements, operations at The Dow TRIGA Research Reactor are devoted to NAA activities. (author)

Pierce-type electron gun with a large concave LaB6 cathode

International Nuclear Information System (INIS)

Shintake, Tumoru; Ohba, Kunio; Matoba, Masaru; Katase, Akira

1981-01-01

A Pierce-type electron gun with a concave cathode of lanthanum hexaboride (LaB 6 ) 30 mm in diameter is described. At an accelerating voltage of 3 kV and a cathode temperature of 1340 0 C, a focussed electron beam of DC 300 mA was obtained. (author)

Improving Immunization Coverage in a Rural School District in Pierce County, Washington

Science.gov (United States)

Peterson, Robin M.; Cook, Carolyn; Yerxa, Mary E.; Marshall, James H.; Pulos, Elizabeth; Rollosson, Matthew P.

2012-01-01

Washington State has some of the highest percentages of school immunization exemptions in the country. We compared school immunization records in a rural school district in Pierce County, Washington, to immunization records in the state immunization information system (IIS) and parent-held records. Correcting school immunization records resulted…

Radicinin from Cochliobolus sp. inhibits Xylella fastidiosa, the causal agent of Pierce's Disease of grapevine.

Science.gov (United States)

Aldrich, Thomas J; Rolshausen, Philippe E; Roper, M Caroline; Reader, Jordan M; Steinhaus, Matthew J; Rapicavoli, Jeannette; Vosburg, David A; Maloney, Katherine N

2015-08-01

The fastidious phytopathogenic bacterium, Xylella fastidiosa, poses a substantial threat to many economically important crops, causing devastating diseases including Pierce's Disease of grapevine. Grapevines (Vitis vinifera L.) planted in an area under Pierce's Disease pressure often display differences in disease severity and symptom expression, with apparently healthy vines growing alongside the dying ones, despite the fact that all the vines are genetic clones of one another. Under the hypothesis that endophytic microbes might be responsible for this non-genetic resistance to X. fastidiosa, endophytic fungi were isolated from vineyard cvs. 'Chardonnay' and 'Cabernet Sauvignon' grown under high Pierce's Disease pressure. A Cochliobolus sp. isolated from a Cabernet Sauvignon grapevine inhibited the growth of X. fastidiosa in vitro. Bioassay-guided isolation of an organic extract of Cochliobolus sp. yielded the natural product radicinin as the major active compound. Radicinin also inhibited proteases isolated from the culture supernatant of X. fastidiosa. In order to assess structure-activity relationships, three semi-synthetic derivatives of radicinin were prepared and tested for activity against X. fastidiosa in vitro. Assay results of these derivatives are consistent with enzyme inactivation by conjugate addition to carbon-10 of radicinin, as proposed previously. Copyright © 2015 Elsevier Ltd. All rights reserved.

Determination and analysis of neutron flux distribution on radial Piercing beam port for utilization of Kartini research reactor

International Nuclear Information System (INIS)

Widarto

2002-01-01

Determination and analysis of neutron flux measurements on radial piercing beam port have been done as completion experimental data document and progressing on utilization of the Kartini research reactor purposes. The analysis and determination of the neutron flux have been carried out by using Au foils detector neutron activation analysis method which put on the radius of cross section (19 cm) and a long of radial piercing beam port (310 cm) Based on the calculation, distribution of the thermal neutron flux is around (8.3 ± 0.9) x 10 5 ncm -2 s -1 to (6.8 ± 0.5) x 10 7 ncm -2 s -1 and fast neutron is (5.0 ± 0.2) x 10 5 ncm -2 s -1 to (1.43 ± 0.6) x 10 7 ncm -2 s -1 . Analyzing by means of curve fitting method could be concluded that the neutron flux distribution on radial piercing beam port has profiled as a polynomial curve. (author)

Physical-chemical treatment of rainwater runoff in recovery and recycling companies: lab-scale investigation.

Science.gov (United States)

Blondeel, E; De Wandel, S; Florin, R; Hugelier, S; Chys, M; Depuydt, V; Folens, K; Du Laing, G; Verliefde, A; Van Hulle, S W H

2017-08-10

Scrap material recovery and recycling companies are producing wastewater in which common pollutants (such as COD, nutrients and suspended solids), toxic metals, polyaromatic hydrocarbons (PAH) and polychlorinated biphenyls (PCB) frequently can exceed the discharge limits. Lab-scale optimisation of different possible physical-chemical treatment techniques was performed on the wastewater originating from three different companies in view of further testing at pilot-scale testing and implementation at full-scale. The lab-scale tests demonstrate that sedimentation or hydrocyclone treatment as stand-alone technique cannot be used for proper treatment of this type of wastewater. Dual bed filtration or coagulation/flocculation proved to be more promising with removal efficiencies of about 71-95% (dual bed filtration) and 61-97% (coagulation/flocculation) for the above-mentioned pollutants (metals, PAH and PCB).

Motivations for body piercings and tattoos - the role of sexual abuse and the frequency of body modifications.

Science.gov (United States)

Stirn, Aglaja; Oddo, Silvia; Peregrinova, Ludmila; Philipp, Swetlana; Hinz, Andreas

2011-12-30

Though the popularity of body modification increases, psychosocial data about practitioners of body piercing and tattooing are few and controversial. Most studies used semi-structured interviews and relatively small sample sizes. The aim of this study was to explore psychosocial background information (motivation, sexual abuse) for body modification practises based on a sufficiently large sample. A core group of 432 subjects with body piercings and/or tattoos (readers of a specialised magazine on body modification; mean age: 28 years) was investigated in this study using a 55-item questionnaire. The mean number of body modifications (piercings and tattoos) was nine. Participants with a history of sexual abuse and high users with more than 10 body modifications differed from those without these features with respect to several motivations and consequences of body modification. Participants with sexual abuse often stated that they wanted to overcome certain experiences, and high users were characterised by the feeling of an addiction to continue body modification. Clinicians should include questions on body modifications and their motives in anamnestic schedules. Copyright © 2011 Elsevier Ltd. All rights reserved.

Underwater piercing of a tunnel

Energy Technology Data Exchange (ETDEWEB)

Solvik, O.

1984-11-01

Norwegian consultants and contractors have been confronted with the task of blasting a final penetrating passage that will open the way for the water in a reservoir to flow through the hydropower turbines. Norway has almost certainly led in this area because of its special topographical and geological conditions. The glacial activities have created a number of natural and very deep lakes forming cheap reservoirs. Piercings at depths up to about 100 m have been performed. Problems tend to increase with depth, but unsuccessful penetration can occur at any depth. Secondary effects to consider include the danger of slides when the water level is lowered, wave erosion along the lowered new shoreline, erosion at all streams and rivers flowing into the lake and groundwater erosion in the newly exposed dry shoreline. Methods of penetration can be roughly divided into two categories: penetration against the open tunnel shaft (open system); and penetration against the closed tunnel shaft (closed system). 6 figures.

The Social Construction Of Systems Applications Products (SAP R/3 By Employees Of A South African Chemical Industries Company

Directory of Open Access Journals (Sweden)

Arnold Beyleveld

2005-11-01

Full Text Available Many companies that have implemented an Enterprise Resource Planning (ERP system do not reap the intended benefits of the potential inherent in these systems despite their exorbitant implementation cost. The reasons for this are numerous. This study is aimed at understanding the social impact a Systems Applications Products (SAP R/3 implementation had on the end users of a South African Company in the Chemical Industry. A qualitative process evaluation study was undertaken to obtain a clearer understanding of the underlying organisational cultural factors that emerged from such an implementation. The objective was to provide a framework for companies considering such an implementation to ensure better system productivity and to assist companies already using an ERP solution with continuous improvement.

Design and development of a pierce electron gun

International Nuclear Information System (INIS)

Bhattacharjee, D.; Tiwari, R.; Nayak, B.; Tillu, A.R.; Jayaprakash, D.; Mishra, R.L.; Mittal, K.C.; Chakravarthy, D.P.; Gantayet, L.M.

2011-01-01

An electron gun is designed and developed using the Pierce configuration for the focusing electrode. Simulations were carried out using CST Particle Studio. The Gun is a thermionic type electron gun with indirect heating of the LaB6 cathode. The gun is capable of delivering a beam current of 500 mA at 50 kV with a beam size of less than 3.5 mm. It was tested on the gun test bench. This paper presents the gun design, particle simulations study, testing of the gun on test bench and integration with the ECIL 9 MeV linac. (author)

Body piercing and tattoos: a survey on young adults' knowledge of the risks and practices in body art

Directory of Open Access Journals (Sweden)

Caggiano Giuseppina

2011-10-01

Full Text Available Abstract Background The practice of tattooing and piercing has expanded in western society. In order to verify young adults' knowledge of the risk and practices related to body art, an investigation was conducted among freshmen of the University of Bari in the region of Apulia, Italy. Methods The study was carried out in the Academic Year 2009-2010 through an anonymous self-administered written questionnaire distributed to 1.656 freshmen enrolled in 17 Degree Courses. Results Of the 1.598 students included in the analysis, 78.3% believe it is risky to undergo piercing/tattoo practices. AIDS was indicated as a possible infection by 60.3% of freshmen, hepatitis C by 38.2%, tetanus by 34.3% and hepatitis B by 33.7% of the sample. 28.1% of freshmen were not aware that there are also non-infectious complications. 29% of the sample had at least one piercing or tattoo (this percentage does not include earlobe piercing in women. Of those with body art, the decision to undergo body art was made autonomously in 57.9% of the participants. 56.3% of freshmen undergoing body art had taken less than a month to decide. With regard to the reasons that led the sample to undergo body art, 28.4% were unable to explain it, 23.8% answered to improve their aesthetic aspect, 18.4% to distinguish themselves from others, 12.3% for fashion; 17.1% for other reasons. 25.4% of the sample declared that they had a piercing (79.8% female vs 20.2% male; ratio M/F 1:4.0. The average age for a first piercing was 15.3 years (range 10-27; SD ± 2.9. 9.6% of the sample declared that they have a tattoo (69.9% female vs 30.1% male; ratio M/F 1:2.3. The average age for a first tattoo was 17.5 years (range 10-26, SD ± 2.4. Conclusions Most of the freshmen knew about AIDS-related risks but not other potential risks. Body art is fairly common among young adults (especially women. The decision is often not shared with the family and is undertaken mostly without a specific reason or for the

Effect of the thermal spread in a beam on the radiative Pierce instability

International Nuclear Information System (INIS)

Klochkov, D.N.; Pekar, M.Yu.; Rukhadze, A.A.

1999-01-01

The linear dynamics of the radiative Pierce instability in a single plane in the case of the relativistic electron beam with T temperature stabilized through a strong magnetic field, is considered. It is shown that the instability increment decreases with the thermal spread growth [ru

Konsep Dasar Semiotika Dalam Komunikasi Massa Menurut Charles Sanders Pierce

OpenAIRE

Suherdiana, Dadan

2008-01-01

Sign or symbol in mass communication is not something with without makna. Nevertheless, it is not easy for anyone to can comprehend that sign. Minimally, that is a method for it, is named semiotic. Charles Sanders Pierce introduce pragmatism for this method. For him, semiotics have three researches area: syntactic semiotic, semantic semiotic and pragmatic semiotic. Sintaktic semiotic, teach the relation between sign with others sign; semantic semiotic, teach the relation and consequence in in...

Cross-Calibrating Sunspot Magnetic Field Strength Measurements from the McMath-Pierce Solar Telescope and the Dunn Solar Telescope

Science.gov (United States)

Watson, Fraser T.; Beck, Christian; Penn, Matthew J.; Tritschler, Alexandra; Pillet, Valentín Martinez; Livingston, William C.

2015-11-01

In this article we describe a recent effort to cross-calibrate data from an infrared detector at the McMath-Pierce Solar Telescope and the Facility InfraRed Spectropolarimeter (FIRS) at the Dunn Solar Telescope. A synoptic observation program at the McMath-Pierce has measured umbral magnetic field strengths since 1998, and this data set has recently been compared with umbral magnetic field observations from SOHO/MDI and SDO/HMI. To further improve on the data from McMath-Pierce, we compared the data with measurements taken at the Dunn Solar Telescope with far greater spectral resolution than has been possible with space instrumentation. To minimise potential disruption to the study, concurrent umbral measurements were made so that the relationship between the two datasets can be most accurately characterised. We find that there is a strong agreement between the umbral magnetic field strengths recorded by each instrument, and we reduced the FIRS data in two different ways to successfully test this correlation further.

Compressed air system audit in a chemical company

Energy Technology Data Exchange (ETDEWEB)

Radgen, P. [Fraunhofer ISI, Karlsruhe (Germany)

2005-07-01

This paper describes the results achieved during a compressed air system audit at a chemical company in Switzerland. The aim of the audit conducted in Muttenz at the site of Clariant Schweiz AG was to analyse the installed compressed air system and its operation in order to identify energy and cost saving potentials. Because there was measurement equipment already installed, it was not necessary to install a new meter. Instead the existing data had to be extracted from the controlled system and regrouped for the analysis. Aggregated data for 2003 and 2004 and a set of detailed data acquired in the course of one week were used for the analysis. The audit identified a number of measures to improve the compressed air system, but had to conclude that the saving potentials at this site are below average. The audit included the compressors, the air treatment and air distribution up to production or storage buildings. The saving potential identified was quantified as about 300 000 kWh/a, or 13.3% of the compressed air energy demand. The cost savings were calculated to be around 41 852 Swiss Franks. (orig.)

MANAGING NEWLY ESTABLISHED PESTS: Cooperative efforts contained spread of Pierce's disease and found genetic resistance

Directory of Open Access Journals (Sweden)

George Bruening

2014-10-01

Full Text Available An outbreak of Pierce's disease of grapevine in the Temecula Valley in the late 1990s was one in a decades-long series of sporadic appearances of this infection in California. However, the new outbreak was qualitatively different because of the rapidity with which it spread in the vineyard and its appearance almost simultaneously at distant locations. The causative agent of Pierce's disease is the bacterium Xylella fastidiosa, and the distinct characteristics of the Temecula Valley outbreak were traced to the establishment of a new insect vector in California, the glassy-winged sharpshooter. Intensive and collaborative efforts among government agencies, industry and research institutions over 15 years have successfully contained the disease, and given scientists time to discover promising long-term potential solutions through genetic resistance.

[Body modifications and sexual health : Impact of tattoos, body piercing and esthetic genital plastic surgery on the sexual health of women and men].

Science.gov (United States)

Stirn, Aglaja Valentina; Zannoni, Ronja

2017-09-01

The present paper addresses the psychological impact of body modifications (e.g. tattoos, body piercing and esthetic genital plastic surgery) on the sexual health of individuals and refers to past and present research insights. Body modifications are understood as invasive interventions on the human body, especially interventions on the human skin which result in (semi-)permanent changes. Tattoos and body piercing (in particular genital piercing) positively affect the sexual satisfaction and the sexual appeal of men and women but there is a controversial association with high risk sexual behavior. Moreover, this article focuses on esthetic genital plastic surgery based on the increasing interest and insights of the impact on female genital self-perception and sexual behavior.

The incidence of complications associated with lip and/or tongue piercings: a systematic review

NARCIS (Netherlands)

Hennequin-Hoenderdos, N.L.; Slot, D.E.; Van der Weijden, G.A.

2016-01-01

Objective: This review determines the incidence of complications associated with lip and/or tongue piercings based on a systematic evaluation of the available literature. Material and Methods: MEDLINE–PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through June 2014 to

Piercing of the containment shell of a reactor building in case of airplane crash

International Nuclear Information System (INIS)

Herzog, M.

1978-01-01

The author presents a simple calculation model for a realistic check of the piercing safety of containments of reactor buildings in case of airplane crash. Its application is illustrated by a numerical example (Starfighter crash on the Unterweser nuclear power plant). (orig.) [de

Success and Failures of Acquisitions: A Case Study for a Chemical Company

Directory of Open Access Journals (Sweden)

Shainaaz MOOSA MUSTAFFA

2017-05-01

Full Text Available The purpose of this study was to perform a universal inspection of the processes adopted in acquisitions by concentrating on attributes which are speedily implemented in the industry. The approach to this research study was based on literature reviews to gain knowledge on the causes of failure and the factors attributed to the success of acquisitions in the case study concerning a chemical company. This method was applied to identify if the failures and successes researched are shown in the case study. The research study firstly looked at various approaches to acquisitions, namely, the pre-acquisition, post-acquisition and integration phases together with the motives for acquisitions. The study delves further into factors influencing the failures and successes of acquisitions. A notable body of research was consulted to focus on these factors. The research study highlights a framework incorporating the management of post-integration strategy concurrently with the people and the organisational goals. The key findings showed that the company lacked a formal integration plan, cultural integration, ad proper communication plans. This resulted in staff unrest and high attrition of staff from deal announcement date up to post integration, leading to high resistance from staff and poor people integration. The company did however achieve financial success through synergy realisation. This positive outcome could have been achieved quicker with the proper integration plans within the different phases of the acquisition. The knowledge attained from this study will hopefully add to the body of knowledge on acquisitions.

Control of Pierce's Disease by Phage.

Directory of Open Access Journals (Sweden)

Mayukh Das

Full Text Available Pierce's Disease (PD of grapevines, caused by Xylella fastidiosa subsp. fastidiosa (Xf, is a limiting factor in the cultivation of grapevines in the US. There are presently no effective control methods to prevent or treat PD. The therapeutic and prophylactic efficacy of a phage cocktail composed of four virulent (lytic phages was evaluated for control of PD. Xf levels in grapevines were significantly reduced in therapeutically or prophylactically treated grapevines. PD symptoms ceased to progress one week post-therapeutic treatment and symptoms were not observed in prophylactically treated grapevines. Cocktail phage levels increased in grapevines in the presence of the host. No in planta phage-resistant Xf isolates were obtained. Moreover, Xf mutants selected for phage resistance in vitro did not cause PD symptoms. Our results indicate that phages have great potential for biocontrol of PD and other economically important diseases caused by Xylella.

The Incompetence of Labour Court to Proceed With the Executions of the Labour Processes After Declared Bankruptcy of the Company

Directory of Open Access Journals (Sweden)

Érika Santiago Silva

2015-12-01

Full Text Available The 11.101/05 Law, when dealing with the bankruptcy of commercial companies, as basic postulates invokes the principles of universality and indivisibility of the bankruptcy court, beyond the principle of par conditio creditorum. However, the Labour Court, disregarding the purpose of the Bankruptcy Law, and in flagrant violation of the mentioned principles, insists on proceeding with the executions of the labor processes proposed against the bankrupt company, surpassing the limits of their competence, thus so completely arbitrary, piercing the corporate veil in order to reach the personal patrimony of the shareholders of the company. This practice may prejudice the bankruptcy, since, if ascertained the liability of bankrupt partners, they will no longer have patrimony to be raised by the bankruptcy, because all of its property have been realized in favor only of labor creditors, thus offending the equality that all the creditors must be treated.

Tattoos and Piercing: A Review for the Emergency Department Physician

Directory of Open Access Journals (Sweden)

William K. Mallon

2011-05-01

Full Text Available Tattoos and piercings are increasingly part of everyday life for large sections of the population, and more emergency physicians are seeing these body modifications (BM adorn their patients. In this review we elucidate the most common forms of these BMs, we describe how they may affect both the physical and psychological health of the patient undergoing treatment, and also try to educate around any potential pitfalls in treating associated complications. [West J Emerg Med. 2011;12(4:393–398.

Improved piercing of microneedle arrays in dermatomed human skin by an impact insertion method

NARCIS (Netherlands)

Verbaan, F.J.; Bal, S.M.; Berg, van den D.J.; Dijksman, J.A.; Hecke, van M.; Verpoorten, H.; Berg, van den A.; Luttge, R.; Bouwstra, J.A.

2008-01-01

An electrical applicator was designed, which can pierce short microneedles into the skin with a predefined velocity. Three different shapes of microneedles were used, namely 300 µm assembled hollow metal microneedle arrays, 300 µm solid metal microneedle arrays and 245 µm hollow silicon microneedle

The prevalence of oral and peri-oral piercings in young adults: a systematic review

NARCIS (Netherlands)

Hennequin-Hoenderdos, N.L.; Slot, D.E.; van der Weijden, G.A.

2012-01-01

OBJECTIVE: To determine the prevalence of oral and/or peri-oral piercings in young adults based on a systematic review of the available literature. MATERIAL AND METHODS: The MEDLINE-PubMed, Cochrane-CENTRAL and EMBASE databases were comprehensively searched through April 2012 to identify appropriate

Pierced Lasso Proteins

Science.gov (United States)

Jennings, Patricia

Entanglement and knots are naturally occurring, where, in the microscopic world, knots in DNA and homopolymers are well characterized. The most complex knots are observed in proteins which are harder to investigate, as proteins are heteropolymers composed of a combination of 20 different amino acids with different individual biophysical properties. As new-knotted topologies and new proteins containing knots continue to be discovered and characterized, the investigation of knots in proteins has gained intense interest. Thus far, the principle focus has been on the evolutionary origin of tying a knot, with questions of how a protein chain `self-ties' into a knot, what the mechanism(s) are that contribute to threading, and the biological relevance and functional implication of a knotted topology in vivo gaining the most insight. Efforts to study the fully untied and unfolded chain indicate that the knot is highly stable, remaining intact in the unfolded state orders of magnitude longer than first anticipated. The persistence of ``stable'' knots in the unfolded state, together with the challenge of defining an unfolded and untied chain from an unfolded and knotted chain, complicates the study of fully untied protein in vitro. Our discovery of a new class of knotted proteins, the Pierced Lassos (PL) loop topology, simplifies the knotting approach. While PLs are not easily recognizable by the naked eye, they have now been identified in many proteins in the PDB through the use of computation tools. PL topologies are diverse proteins found in all kingdoms of life, performing a large variety of biological responses such as cell signaling, immune responses, transporters and inhibitors (http://lassoprot.cent.uw.edu.pl/). Many of these PL topologies are secreted proteins, extracellular proteins, as well as, redox sensors, enzymes and metal and co-factor binding proteins; all of which provide a favorable environment for the formation of the disulphide bridge. In the PL

A 120kV IGBT modulator for driving a Pierce electron gun

International Nuclear Information System (INIS)

Earley, Lawrence M.; Brown, Richard W.; Carlson, Randolph L.; Ferguson, Patrick; Haynes, William B.; Kirbie, Hugh C.; Russell, Steven J.; Sigler, Floyd E.; Smirnova, Evgenya I.; Wheat, Robert M. Jr.

2004-01-01

An IGBT modulator has been developed to drive a 120 kV, 23 A Pierce electron gun. The modulator is capable of producing pulses up to 10 μs in width at repetition rates up to 10Hz with no active reset. The pulse rise time on the electron gun will be approximately 2 μs and the remaining 8 μs of flattop is tuned to have a ripple of less than 1 percent rms. The modulator technology was developed from a previous 50 kV prototype. The modulator consists of six boards, each with one EUPEC IGBT that drives a single common step-up transformer wound on METGLAS 2605SC cores. The six transformer cores share a common bi-filar output secondary winding. The modulator uses a fiber optic trigger system and has a high voltage cable output with an epoxy receptacle on the oil end and a ceramic receptacle on the vacuum end. The 120 kV electron gun was manufactured by MDS Co. and will be used to generate sheet electron beams from the standard pencil beam produced by the Pierce electron gun.

Improved piercing of microneedle arrays in dermatomed human skin by an impact insertion method

NARCIS (Netherlands)

Verbaan, F.J.; Bal, S.M.; van den Berg, D.J.; Dijksman, J.A.; van Hecke, M.; Verpoorten, H.; van den Berg, Albert; Lüttge, Regina; Bouwstra, J.A.

2008-01-01

An electrical applicator was designed, which can pierce short microneedles into the skin with a predefined velocity. Three different shapes of microneedles were used, namely 300 mu m assembled hollow metal microneedle arrays, 300 mu m solid metal microneedle arrays and 245 mu m hollow silicon

Preliminary site survey report for the Uniroyal Chemical Company, formerly the Diamond Magnesium Company, 720 Fairport-Nursery Road, Painesville, Ohio (DMP001)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1990-03-01

At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducted a preliminary radiological survey at the Uniroyal Chemical Company, formerly the Diamond Magnesium Company, 720 Fairport-Nursery Road, Painesville, Ohio (DMP001), in 1988. The purpose of the survey was to determine whether the property was contaminated with radioactive residues from the former Manhattan Engineer District (MED) project. The scope of this preliminary survey primarily covered the area west of the buildings around the railroad car spill containment basin. The survey included direct measurement of gamma radiation levels at the surface and soil sampling for radionuclide analyses. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria for both 238 U and 226 Ra in soil. Based on the results of this radiological assessment, it is recommended that a follow-up, detailed radiological survey of both surface and subsurface environs be performed to more precisely define the extent of the contamination. 5 refs., 10 figs., 3 tabs

[Shiftwork and health--experience from a chemical company].

Science.gov (United States)

Oberlinner, C; Lang, S; Nasterlack, M; Yong, M

2013-03-01

Shiftwork is an essential part of our society. At the same time scientific evaluations demonstrate possible negative effects of shiftwork on the health status of the employees. Against this background we performed different studies to evaluate these effects within the specific shift system in a large chemical site in Germany. METHODS AND STUDY GROUP: To evaluate the impact of the different working times on job-related stress perception and work-life-balance we performed a cross-sectional study with 1494 blue collar workers (825 shift- and 669 day workers). Employees working in the rotating shift system reported lower frequencies of perceived time pressure (p = 0.008), and lower stress levels (p = 0.01), compared to the day workers. No significant difference was found with regard to work-life-balance and other aspects of job-related stress perception within both groups. Against the general opinion and study-results in the past we did not find a negative effect of our shift-system on self-reported stress. These results are in accordance with results of other cohort-studies on the specific shift system within the company demonstrating no difference in the health status of our shift workers compared to day workers. © Georg Thieme Verlag KG Stuttgart · New York.

A triad of evidence for care of women with genital piercings.

Science.gov (United States)

Young, Cathy; Armstrong, Myrna L; Roberts, Alden E; Mello, Inola; Angel, Elayne

2010-02-01

To add three further dimensions of evidence for the care of women with genital piercings (GPs). Following a literature review, a cross-sectional study replicated previous work, using a web-based survey. This triad of evidence provides (a) descriptive quantitative data (N = 240) about women with GPs, (b) qualitative data about women with GPs, as well as (c) clinical observations from 60 healthcare providers (HCPs) who have cared for women with GPs. Three important findings about women with GPs were validated: (a) GPs were deliberate actions, sought for personal and sexual expression; (b) women with GPs treat piercings as a normal, meaningful part of their lives which produce sexual enhancement and expression; and (c) they continue to seek information about GP care from nonhealth providers. New data indicate that they have experienced depression (47%), abuse (physical 18%; emotional, 27%; sexual, 14%), and forced sexual activity (35%) in their lives. Several unsubstantiated assumptions about women with GPs are challenged with these data. GPs should not delay important health care. Health-protective, as well as health promotion, behaviors are important to reduce risks. Nurse practitioners (NPs) can become effective and resourceful advocates in three specific areas of care: (a) responsiveness to women with GPs, (b) collaborative decision making for the removal of jewelry, and (c) promotion of applicable patient education.

Piercing the sovereign ceiling: Issues in oil and gas project financing

International Nuclear Information System (INIS)

Coleman, T.S.

1998-01-01

In the oil and gas sector, corporations and governments face huge capital spending requirements in order to transform large resource discoveries into producing, cash-generating assets. A significant portion of this funding is expected to be done on a project finance basis, where bank lenders or bond investors take a secured position in financing a discrete project, with the expectation of being paid back by the cash flows from that project after completion. This trend is increasing demand for crediting rating services to provide credit ratings for these project financings. A key challenge is to analyze and rate credit-worthy projects in countries that have relatively low foreign currency sovereign ceilings due to economic, political, and financial risks. In most cases, the credit ratings for projects financed in currencies outside the host country are capped at the country''s foreign currency ceiling. However, in a few instances, mainly in the oil and gas sector, Moody''s has pierced the foreign currency ceiling or rated certain projects above the sovereign ratings of the countries where they are domiciled. The purpose of this article is to briefly explain some of the qualitative factors and considerations that have allowed Moody''s to pierce the ceiling in the oil and gas sector, with a focus on two recent and noteworthy projects: Ras Laffan Liquefied Natural Gas in Qatar and Petrozuata in Venezuela

The use of dynamic capabilities to boost innovation in a Brazilian Chemical Company

Directory of Open Access Journals (Sweden)

Cristiane Froehlich

Full Text Available Abstract Dynamic capabilities seek to explain how competitive advantages can be built in rapidly changing environments. This study aims to assess how the application of dynamic capabilities can contribute to the expansion of innovation capabilities. Data was collected on ten semi-structured interviews with executives from a chemical company, and analyzed using qualitative content analysis. Results indicate that the application of dynamic capabilities contributes to the development of innovation capabilities through the consolidation of the first dynamic capability (sensing, which fosters innovation. Sensing can be considered an organizational capability, resulting from the integration between organizational strategies and the innovation practices of the organization as a whole. This study brings the following contributions the need to include a new microfoundation in the sensing capability, which in this study is called ‘processes to manage innovation on a strategic level' and the need to adapt another microfoundation related to the sensing capability, called ‘processes oriented toward collaboration with suppliers to complement and stimulate innovations within the company'. It is suggested that these processes should be reassessed in terms of their potential to generate and complement organizational innovation.

Tatuajes y piercing: consideraciones sobre el alcance de una ordenanza municipal en la ciudad de Córdoba Tattoos and piercing: considerations about the scope of a municipal statue in Cordoba city

Directory of Open Access Journals (Sweden)

J M Verduzco

2008-09-01

Full Text Available Las ordenanzas municipales son herramientas legales, a través de las cuales los municipios o comunas ejercen un control sobre diversas actividades, algunas de las cuales como el caso de la práctica de tatuajes y piercing, pueden ser nocivas para la salud. La Municipalidad de Córdoba a través de la Ordenanza Nº 10962, sancionada el 6 de Octubre de 2005, intenta controlar esta ancestral práctica realizada sobre la piel humana. El presente trabajo tiene como finalidad analizar el articulado de esta Ordenanza y hacer algunas consideraciones sobre su utilidad en la prevención de enfermedades.Municipal statues are legal tools ratified by the municipal legislative power, stablishing rules in the corresponding scope. This rules have the aim of regulating different activities, over which the Municipality police power is excercised. Many of this activities are related to public health, because they can cause diseases in the population exposed to them. The practice of tattoing and piercing is one of this activities able to cause diseases. Due to this fact, the Municipality of Córdoba has sanctioned statue 10962 in order to control this ancestral practice.

Evaluation of Two Surface Sampling Methods for Microbiological and Chemical Analyses To Assess the Presence of Biofilms in Food Companies.

Science.gov (United States)

Maes, Sharon; Huu, Son Nguyen; Heyndrickx, Marc; Weyenberg, Stephanie van; Steenackers, Hans; Verplaetse, Alex; Vackier, Thijs; Sampers, Imca; Raes, Katleen; Reu, Koen De

2017-12-01

Biofilms are an important source of contamination in food companies, yet the composition of biofilms in practice is still mostly unknown. The chemical and microbiological characterization of surface samples taken after cleaning and disinfection is very important to distinguish free-living bacteria from the attached bacteria in biofilms. In this study, sampling methods that are potentially useful for both chemical and microbiological analyses of surface samples were evaluated. In the manufacturing facilities of eight Belgian food companies, surfaces were sampled after cleaning and disinfection using two sampling methods: the scraper-flocked swab method and the sponge stick method. Microbiological and chemical analyses were performed on these samples to evaluate the suitability of the sampling methods for the quantification of extracellular polymeric substance components and microorganisms originating from biofilms in these facilities. The scraper-flocked swab method was most suitable for chemical analyses of the samples because the material in these swabs did not interfere with determination of the chemical components. For microbiological enumerations, the sponge stick method was slightly but not significantly more effective than the scraper-flocked swab method. In all but one of the facilities, at least 20% of the sampled surfaces had more than 10 2 CFU/100 cm 2 . Proteins were found in 20% of the chemically analyzed surface samples, and carbohydrates and uronic acids were found in 15 and 8% of the samples, respectively. When chemical and microbiological results were combined, 17% of the sampled surfaces were contaminated with both microorganisms and at least one of the analyzed chemical components; thus, these surfaces were characterized as carrying biofilm. Overall, microbiological contamination in the food industry is highly variable by food sector and even within a facility at various sampling points and sampling times.

The corrosion resistance of materials used for the manufacture of ear piercing studs

International Nuclear Information System (INIS)

Correa, O. V.; Saiki, M.; Rogero, S. O.; Costa, I.

2003-01-01

Nickel containing alloy shave been widely used as substrates for the manufacture of studs used for ear piercing. Unfortunately, nickel has also been related to the development of allergic contact dermatitis caused by skin sensitization due to Ni''2+ ions. Nickel ions can be leached out into the body fluids due to corrosion reactions. Defect free coatings are very difficult to produce, and therefore nickel free materials should be used as substrates of ear piercing studs, although the commercial alloys used usually contain this element. In this study, the corrosion resistance of two kinds of commercial studs prepared with nickel containing substrates and a titanium laboratory made stud was determined in a culture medium. The corrosion resistance of the studs was investigated by means of potentiodynamic polarization tests and electrochemical impedance spectroscopy as a function of immersion time in the culture medium. The elements that leached out into the medium due to corrosion reactions were analyzed by instrumental neutron activation analysis. The surfaces of the commercial gold-coated studs were examined by scanning electron microscopy and analyzed by energy dispersive spectroscopy, both before and after exposure to the culture medium. The cytotoxicity of the tested studs was also determined in the culture medium. (Author) 10 refs

Aerial Survey of Vessel Usage and Marine Animal Occurrence between Ft. Pierce and Key West Florida, 1992-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — An aerial survey between Ft Pierce and Key West Florida was performed aboard US Coast Guard helicopters and fixed wing aircraft from September 1992 through March...

[Are nail polish, artificial nails and piercings allowed outside the surgical area?Recommendations for the perioperative policy

NARCIS (Netherlands)

Bucx, M.J.L.; Krijtenburg, P.; Scheffer, G.J.

2017-01-01

- An increasing number of patients wear nail polish, artificial nails or have piercings.- There is uncertainty about the perioperative management of these items, especially when located outside the surgical area.- In the majority of hospitals, patients are urged to remove these items preoperatively,

[Are nail polish, artificial nails and piercings allowed outside the surgical area?Recommendations for the perioperative policy].

Science.gov (United States)

Bucx, M J L; Krijtenburg, P; Scheffer, G J

2017-01-01

- An increasing number of patients wear nail polish, artificial nails or have piercings.- There is uncertainty about the perioperative management of these items, especially when located outside the surgical area.- In the majority of hospitals, patients are urged to remove these items preoperatively, under the assumption that they might cause problems.- Frequently, however, these items cannot be removed straightforwardly.- Nail polish and artificial nails only very rarely cause perioperative problems and therefore do not need to be removed pre-operatively.- The same applies to most piercings, except when located in or near the respiratory tract, if they have sharp endings or if they might cause problems as a result of the perioperative positioning of the patient.- Providing adequate information to the patient, knowledge about removal of these items and documentation of agreed arrangements are all important.- A national guideline concerning perioperative policy is urgently required.

When Paradigms Clash: Comments on Cameron and Pierce's Claim That Rewards Do Not Undermine Intrinsic Motivation.

Science.gov (United States)

Ryan, Richard M.; Deci, Edward L.

1996-01-01

The conclusion of J. Cameron and W. D. Pierce that rewards do not pose a threat to intrinsic motivation (1994) is a misrepresentation of the literature based on a flawed meta-analysis. Their analysis is more an attempt to defend behaviorist turf rather than meaningful consideration of relevant data and issues. (Author/SLD)

Appearance and culture: oral pathology associated with certain "fashions" (tattoos, piercings, etc.).

Science.gov (United States)

Chimenos-Küstner, Eduardo; Batlle-Travé, Inés; Velásquez-Rengijo, Sandra; García-Carabaño, Tauca; Viñals-Iglesias, Helena; Roselló-Llabrés, Xavier

2003-01-01

Humans are characterized by a compulsive tendency to distinguish themselves from the rest: differences in clothes, hairstyle or "decorative" details are used to this effect, based on highly diverse criteria. Such differentiating practices may be aimed at identification with a certain ideological group, for example, or with a concrete "fashion", and involve the use of jewelry, clothes, unusual attire, hairstyles, mutilations, etc. In this context, the present review addresses certain aspects of mutilation practices from both the general and specifically dental perspectives. Mutations imply permanent or lasting sectioning or lesions of a part of the body, and comprise skeletal deforming, dental mutilations, circumcision, ablation of the clitoris, scarification, tattoos, and perforations (particularly of the soft tissues). In this sense, tattoos and perforations or piercings are popular -- particularly among adolescents. This trend may be interpreted as a form of communication, identity expression, or as a type of body cult (i.e., so-called "body art"). Such mutilating practices reflect different motivations including fashion, rebelliousness, differentiation, sexual motives, the remembering of events, physical sensations, and ethnic or tribal influences. However, these practices can cause complications such as infections, laceration and soft and hard tissue damage, hypersensitivity reactions and other alterations of variable severity. Under these premises, questions are raised concerning the competence of those who perform these mutilations, the preventive measures adopted, and the legal conditions under which tattoos and piercings are made in our society.

Royal Dutch Petroleum Company annual report 1992

International Nuclear Information System (INIS)

Anon.

1993-01-01

The Royal Dutch Petroleum Company has no operations of its own and virtually the whole of its income derives from its 60% interest in the companies known collectively as the Royal Dutch/Shell Group of Companies; the other 40% is owned by the Shell Transport and Trading Company, p.l.c. The company is engaged in the oil, natural gas, chemicals, coal and metals businesses throughout the world. The annual report summarises the year's results and analyses earnings in each industry segment. Financial statements for the year ended 31 December 1992 are presented. The Group companies' estimated net quantities of crude oil, natural gas and coal are given

Systematic study of a simple formation of pierce-electron-gun

International Nuclear Information System (INIS)

Saad, Hussein Mahmoud; Abd Elhamed, H.

1985-01-01

In this work the design and construction of a simple form of Pierce Gun are discussed. As the vacuum system used in the experiment was frequently exposed to open air, a solenoid filamentary-cathode was used. Hence, an effective magnetic field has been induced as the filament was heated, whereupon the electrons altered their paths. We, therefore investigated the change in beam intensity as influenced by the focusing electrode material, anode position, and extraction hole width. The focusing electrode effect was examined by comparing the measured emission current density with the corresponding calculated value. The studies showed that electrons follow a saddle-like shape in the gun inter-space. It was modified by the stainless steel focusing electrode

Piercing to the Pith of the Body: The Evolution of Body Mandala and Tantric Corporeality in Tibet

Directory of Open Access Journals (Sweden)

Rae Erin Dachille

2017-09-01

Full Text Available Buddhist tantric practitioners embrace the liminal status of the human body to manifest divine identity. In piercing to the pith of human embodiment, the tantric practitioner reconfigures the shape and contours of his/her reality. This article investigates the evolution of one particular technique for piercing to the pith of the body on Tibetan soil, a ritual practice known as body mandala [lus dkyil Skt. deha-maṇḍala]. In particular, it uncovers a significant shift of emphasis in the application of the Guhyasamāja body mandala practice initiated by champions of the emerging Gandenpa [Dga’ ldan pa] or Gelukpa [Dge lugs pa] tradition of Tibetan Buddhism, Tsongkhapa (1357–1419 and Mkhas grub rje (1385–1438. This article reveals some of the radical implications of ritual exegesis, ranging from the socioreligious aspects of securing prestige for a tradition to the ultimate soteriological goals of modifying the boundaries between life and death and ordinary and enlightened embodiment.

Seed Treatment Combined with a Spot Application of Clothianidin Granules Prolongs the Efficacy of Controlling Piercing-Sucking Insect Pests in Cotton Fields.

Science.gov (United States)

Zhang, Zhengqun; Zhao, Yunhe; Wang, Yao; Li, Beixing; Lin, Jin; Zhang, Xuefeng; Mu, Wei

2017-09-13

Seed treatments can directly protect cotton from early season piercing-sucking insect Aphis gossypii Glover but hardly provide long-term protection against Apolygus lucorum (Meyer-Dür). Therefore, the efficacy of clothianidin seed treatments combined with spot applications of clothianidin granules at the bud stage of cotton was evaluated to control piercing-sucking pests during the entire cotton growing season. Clothianidin seed treatments (at the rate of 4 g ai/kg seed) combined with a clothianidin granular treatment (even at low rate of 0.9 kg ai/ha) at the bud stage can effectively suppress A. gossypii and A. lucorum infestations throughout the seedling and blooming stages after planting and can improve cotton yield. The spot application of clothianidin granules also reduced the population densities of Bemisia tabaci (Gennadius). The dynamic changes of clothianidin residues demonstrated that the control efficacy of clothianidin against A. gossypii and A. lucorum might be related to the residues of this neonicotinoid in cotton leaves. This pest management practice provided long-term protection against cotton piercing-sucking pests for the entire growing season of cotton plants and could supplement the short-term control efficiency of clothianidin used as a seed treatment.

Gunning for accuracy: Company targets human error with 'foolproof' perforating gun

Energy Technology Data Exchange (ETDEWEB)

Ross, E.

2002-12-01

An innovative new design for a scalloped expandable perforating gun is described. The gun is manufactured in Edmonton by LRI Perforating Systems, and it aimed at reducing the chances of human error that can result in sub-optimal performance. A perforating gun is used to pierce the well's casing to allow hydrocarbons to flow into the wellbore. It consists of a carrier, a pipe with an eighth-inch thick wall that protects the explosives downhole, and an inner tube containing the explosives. The LRI system has a unique interlocking mechanism for the end plates, which are attached to either end of the thin-walled charge holder tube, in addition to other advantageous features, including a price advantage of 10 to 15 per cent. Marketing strategy is designed to interest wi reline companies that focus on vertical well applications. 1 photo.

Potential of the McMath-Pierce 1.6-Meter Solar Telescope for Speckle Interferometry

Science.gov (United States)

Harshaw, Richard; Jones, Gregory; Wiley, Edward; Boyce, Patrick; Branston, Detrick; Rowe, David; Genet, Russell

2015-09-01

We explored the aiming and tracking accuracy of the McMath-Pierce 1.6 m solar telescope at Kitt Peak National Observatory as part of an investigation of using this telescope for speckle interferometry of close visual double stars. Several slews of various lengths looked for hysteresis in the positioning system (we found none of significance) and concluded that the 1.6 m telescope would make a useful telescope for speckle interferometry.

The influence of beam boundaries and velocity reduction on Pierce instability in laboratory plasmas

International Nuclear Information System (INIS)

Jovanovic, D.

1982-01-01

The influences of the beam-plasma boundary and of weak nonlinearities on the Pierce instability are investigated. It is shown that the finite width of the beam has negligible influence on both the stability of the system and growth rate. In the nonlinear regime the wavelength decreases and enhancement of the wave potential close to the beam inlet boundary is observed. The relationship between this effect and the formation of double layers is discussed. (Auth.)

Close Binary Star Speckle Interferometry on the McMath-Pierce 0.8-Meter Solar Telescope

Science.gov (United States)

Wiley, Edward; Harshaw, Richard; Jones, Gregory; Branston, Detrick; Boyce, Patrick; Rowe, David; Ridgely, John; Estrada, Reed; Genet, Russell

2015-09-01

Observations were made in April 2014 to assess the utility of the 0.8-meter solar telescope at the McMath-Pierce Solar Observatory at Kitt Peak National Observatory for performing speckle interferometry observations of close binary stars. Several configurations using science cameras, acquisition cameras, eyepieces, and flip mirrors were evaluated. Speckle images were obtained and recommendations for further improvement of the acquisition system are presented.

Compositions and Methods for the Treatment of Pierce's Disease

Energy Technology Data Exchange (ETDEWEB)

Gupta, Goutam (Santa Fe, NM)

2008-10-07

Chimeric anti-microbial proteins, compositions, and methods for the therapeutic and prophylactic treatment of plant diseases caused by the bacterial pathogen Xylella fastidiosa are provided. The anti-microbial proteins of the invention generally comprise a surface recognition domain polypeptide, capable of binding to a bacterial membrane component, fused to a bacterial lysis domain polypeptide, capable of affecting lysis or rupture of the bacterial membrane, typically via a fused polypeptide linker. In particular, methods and compositions for the treatment or prevention of Pierce's disease of grapevines are provided. Methods for the generation of transgenic Vitus vinefera plants expressing xylem-secreted anti-microbial chimeras are also provided.

77 FR 71111 - Approval and Promulgation of Air Quality Implementation Plans; State of Florida; Regional Haze...

Science.gov (United States)

2012-11-29

... Phosphates Company-- South Pierce; International Paper Company--Pensacola Mill; Mosaic-- Bartow; Mosaic... Terminal; Georgia Pacific-Palatka; Smurfit-Stone- Fernandina Beach; Smurfit-Stone-Panama City; Mosaic-New...

Signal amplification and Pierce's instability in convergent particle beams

International Nuclear Information System (INIS)

Gnavi, G.; Gratton, F.T.

1988-01-01

Relativistic electron beams flowing between cylindrical and spherical electrodes (or solid angles sections of electrodes with these geometries) are studied. The beams are focused through the axis in the cylindrical case or through the center when spherical electrodes are considered. It is assumed that the external electrode is part of a device which accelerates the particles, the inner electrode is passive and removes the beams from the system. Electrons move by inertia in the interelectrode space, neutralized by an ion background. Properties of radial, small amplitude, perturbations are analyzed theoretically. Previous analyses of counterstreaming beams indicated that convergence modifies considerably the oscillations spectrum. Here, results on the amplification of signals when a beam is modulated at the external electrode are reported. Then, conditions for the instability of a beam when it flows through grounded electrodes (Pierce's instability of only one beam) are examined

Undersøgelse af pulsformers indflydelse på piercing og skæring i rummet

DEFF Research Database (Denmark)

Horstmann, Birgitte D.; Juhl, Thomas Winther

1999-01-01

Der er gennem en række laboratorieforsøg gennemført piercing og hjørneskæring i rummet (3D) i AISI 316 stål. Det er blevet konstateret at der kan opnås piercingtider på ned til ca. 1 sekund i det anvendte 5 mm pladestål. Tre forskellige pulsformer, Gated puls, Hyper puls og Super puls er blevet...

Petrochemical trends and the chemical company in 2010

International Nuclear Information System (INIS)

Finley, A.B.

1992-01-01

Some trends discernible in the petrochemical industry in Quebec and world-wide -- cyclicality, increasing globalization, environmental concerns, and a high degree of integration between olefins and derivative production -- were discussed. On a global basis, the incremental feedstock for ethylene production during the 1990s will likely be naphtha and propane. The challenge for Quebec lies in its distance from low-priced olefin feedstocks and its limited petrochemical infrastructure. In practice that means that despite Quebec's well-educated and productive work force, local producers will not have the feedstock advantage that would translate to low-priced natural gas liquids such as ethane, butane and propane. Against this backdrop what would be the agenda of a world-class petrochemical company in Quebec? This author's prescription called for a clear company vision that would include an appropriate business focus and downstream integration, the development of the required core competencies and strategies, with emphasis on low-cost feedstock acquisition, feedstock flexibility, maximum by-product values, and super-efficient manufacturing. 9 figs

MEN ARE INNOCENT UNTIL PROVEN GUILTY - A COMMENT ON THE EXAMINATION OF SEX-DIFFERENCES BY PIERCE AND KIRKPATRICK

NARCIS (Netherlands)

PICKERSGILL, MJ; ARRINDELL, WA

1992-01-01

Pierce and Kirkpatrick (1992, Behaviour Research and Therapy, 30, 415-418) addressed the finding that men reported lower levels of fear than women in response to specific fear items and concluded on the basis of their experiment that this was because the men were lying. Their conclusion is

Chaos control in an electron beam with the supercritical current in the hydrodynamic model of the Pierce diode

International Nuclear Information System (INIS)

Koronovskij, A.A.; Rempen, I.S.; Khramov, A.E.

2003-01-01

The possibility of controlling the chaos in the electron beam with the supercritical current in the hydrodynamic model of the Pierce diode through the continuous feedback; the methodology of controlling the chaotic dynamics through stabilization of the unstable equilibrium state in the distributed active medium is proposed [ru

Laser assisted self-pierce riveting of AZ31 magnesium alloy strips

International Nuclear Information System (INIS)

Durandet, Y.; Deam, R.; Beer, A.; Song, W.; Blacket, S.

2010-01-01

Laser assisted self-piercing riveting (LSPR) is a new solid state process that enables low ductility materials to be mechanically joined without cracking. A simple but effective thermal analysis of LSPR is presented that enabled both the absorption of the laser radiation and heat transfer between plies to be determined. The approach was applied to experimental data for LSPR joining of AZ31B-H24 magnesium alloy sheets. It is shown that by using this analytical approach, the temperature at the onset of joining could be estimated and related to observations of joint quality. It was found that crack-free joints were produced at strip temperatures above 200 o C at the time of rivet insertion.

Company Town Shutdown.

Science.gov (United States)

Turnage, Martha A.

Saltville, Virginia, is a former company town whose main employer, a soda ash plant, shut down on July 1, 1971. The closure of the chemical plant displaced 700 workers, and created a crisis that threatened not only the existence of the town, but of the entire region. In response, Virginia Highlands Community College (VHCC), in cooperation with the…

Lidar-revised geologic map of the Poverty Bay 7.5' quadrangle, King and Pierce Counties, Washington

Science.gov (United States)

Tabor, Rowland W.; Booth, Derek B.; Troost, Kathy Goetz

2014-01-01

For this map, we interpreted a 6-ft-resolution lidar digital elevation model combined with the geology depicted on the Geologic Map of the Poverty Bay 7.5' Quadrangle, King and Pierce Counties, Washington (Booth and others, 2004b). The authors of the 2004 map described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Poverty Bay 7.5' quadrangle.

Can superconducting cosmic strings piercing seed black holes generate supermassive black holes in the early universe?

Energy Technology Data Exchange (ETDEWEB)

Lake, Matthew J. [The Institute for Fundamental Study, ' ' The Tah Poe Academia Institute' ' , Naresuan University, Phitsanulok (Thailand); Thailand Center of Excellence in Physics, Ministry of Education, Bangkok (Thailand); Harko, Tiberiu [Department of Physics, Babes-Bolyai University, Cluj-Napoca (Romania); Department of Mathematics, University College London (United Kingdom)

2017-10-15

The discovery of a large number of supermassive black holes (SMBH) at redshifts z > 6, when the Universe was only 900 million years old, raises the question of how such massive compact objects could form in a cosmologically short time interval. Each of the standard scenarios proposed, involving rapid accretion of seed black holes or black hole mergers, faces severe theoretical difficulties in explaining the short-time formation of supermassive objects. In this work we propose an alternative scenario for the formation of SMBH in the early Universe, in which energy transfer from superconducting cosmic strings piercing small seed black holes is the main physical process leading to rapid mass increase. As a toy model, the accretion rate of a seed black hole pierced by two antipodal strings carrying constant current is considered. Using an effective action approach, which phenomenologically incorporates a large class of superconducting string models, we estimate the minimum current required to form SMBH with masses of order M = 2 x 10{sup 9} M {sub CircleDot} by z = 7.085. This corresponds to the mass of the central black hole powering the quasar ULAS J112001.48+064124.3 and is taken as a test case scenario for early-epoch SMBH formation. For GUT scale strings, the required fractional increase in the string energy density, due to the presence of the current, is of order 10{sup -7}, so that their existence remains consistent with current observational bounds on the string tension. In addition, we consider an ''exotic'' scenario, in which an SMBH is generated when a small seed black hole is pierced by a higher-dimensional F-string, predicted by string theory. We find that both topological defect strings and fundamental strings are able to carry currents large enough to generate early-epoch SMBH via our proposed mechanism. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Justice perceptions of performance management practices in a company in the chemical industry

Directory of Open Access Journals (Sweden)

Thanasagree Govender

2015-11-01

Full Text Available The sustainability of corporations globally is becoming increasingly problematic. Combined with the unique challenges of an operating entity, this could potentially expose the profitability of sustainable businesses on a daily basis. The purpose of this study is to evaluate employees’ justice perceptions of performance management practices in a company in the chemical industry. The population includes all the employees in the chemical industry that was used in this study. A total of 140 questionnaires were issued to all the employees in an organisation which had undergone a performance appraisal and 102 respondents completed the surveys, giving a response rate of 72 per cent. A cross-sectional survey design was used in this study. The justice perceptions were measured according to an existing framework developed by Thurston and McNall (2010. The framework is founded on a hypothesised four-factor model constructed according to theories on organisational justice. The employees of the organisation in the chemical sector were involved in this study. Descriptive statistical analyses were used to measure perceptions of justice based on theories on organisational justice. The measuring instrument used was based on recognised models and theories. The study supports the construct validity of the measuring instrument and the reliability of the scales used. The justice constructs were used to identify specific items in the performance management practice that required improvement. The implications of the results are that continual interventions are required if employee commitment and productivity levels are to improve, resulting in a positive impact on business performance. Significant differences in perceptions by demographic groups were reported and discussed. This study explored the importance of understanding justice perceptions of performance management practices as an enabler for sustained business performance. Further, the study confirmed that

Labrets: Piercing and Stretching on the Northwest Coast and in Amazonia

Directory of Open Access Journals (Sweden)

Jenny Reddish

2014-05-01

Full Text Available This article examines the practice of piercing and stretching the lip in order to accommodate a labret in two regions: the North American Northwest Coast (with historical examples from Tlingit and Haida groups and lowland South America (utilizing ethnographic writings on Suya and Kayapo communities. Drawing on the recent ‘sensorial turn’ within anthropology, I suggest an approach which goes beyond considerations of the symbolism of body ornaments and analyses how the infliction of pain they involve can be manipulated to serve social ends at a local level. Also discussed is the use of labrets within global ‘mediascapes’ (Appadurai 1996 by Kayapo and Northwest Coast groups in the context of self-representation and the politicization of ‘culture’ (Wright 1998.

Ventilation Inception and Washout, Scaling, and Effects on Hydrodynamic Performance of a Surface Piercing Strut

Science.gov (United States)

Harwood, Casey; Young, Yin Lu; Ceccio, Steven

2014-11-01

High-lift devices that operate at or near a fluid free surface (such as surface-piercing or shallowly-submerged propellers and hydrofoils) are prone to a multiphase flow phenomenon called ventilation, wherein non-condensable gas is entrained in the low-pressure flow, forming a cavity around the body and dramatically altering the global hydrodynamic forces. Experiments are being conducted at the University of Michigan's towing tank using a canonical surface-piercing strut to investigate atmospheric ventilation. The goals of the work are (i) to gain an understanding of the dominant physics in fully wetted, partially ventilated, and fully ventilated flow regimes, (ii) to quantify the effects of governing dimensionless parameters on the transition between flow regimes, and (iii) to develop scaling relations for the transition between flow regimes. Using theoretical arguments and flow visualization techniques, new criteria are developed for classifying flow regimes and transition mechanisms. Unsteady transition mechanisms are described and mapped as functions of the governing non-dimensional parameters. A theoretical scaling relationship is developed for ventilation washout, which is shown to adequately capture the experimentally-observed washout boundary. This material is based upon work supported by the National Science Foundation Graduate Student Research Fellowship under Grant No. DGE 1256260. Support also comes from the Naval Engineering Education Center (Award No. N65540-10-C-003).

Measurement of electron beams profile of pierce type electron source using sensor of used Tv tube

International Nuclear Information System (INIS)

Darsono; Suhartono; Suprapto; Elin Nuraini

2015-01-01

The measurement of an electron beam profile has been performed using electron beam monitor based on method of phosphorescent materials. The main components of the electron beam monitor consists of a fluorescent sensor using a used Tv tube, CCTV camera to record images on a Tv screen, video adapter as interface between CCTV and laptop, and the laptop as a viewer and data processing. Two Pierce-type electron sources diode and triode was measured the shape of electron beam profile in real time. Results of the experiments showed that the triode electron source of Pierce type gave the shape of electron beam profiles better than that of the diode electron source .The anode voltage is not so influential on the beam profile shape. The focused voltage in the triode electron source is so influence to the shape of the electron beam profile, but above 5 kV no great effect. It can be concluded that the electron beam monitor can provide real time observations and drawings shape of the electron beam profile displayed on the used Tv tube glass screen which is the real picture of the shape of the electron beam profile. Triode electron source produces a better electron beam profile than that of the diode electron source. (author)

Is piercing the veil contrary to high authority? A footnote to the "never-ending story"

OpenAIRE

Breakey, Peter

2013-01-01

Reviews the Supreme Court ruling in VTB Capital Plc v Nutritek International Corp, and reflects on Lord Neuberger's argument that piercing the corporate veil is "contrary to high authority". Examines the background to the decision, details the court's treatment of the earlier House of Lords ruling in Woolfson v Strathclyde RC, and analyses the ratio of Woolfson and that of the House of Lords judgment in Salomon v Salomon. Considers the opportunity for the Supreme Court to provide further clar...

Testing of the McMath-Pierce 0.8-Meter East Auxiliary Telescope's Acquisition and Slewing Accuracy

Science.gov (United States)

Harshaw, Richard; Ray, Jimmy; Prause, Lori; Douglass, David; Branston, Detrick; Genet, Russell M.

2015-09-01

Following mediocre results with pointing tests of the McMath-Pierce 0.8-meter East Auxiliary Telescope in April 2014, a team of astronomers/engineers met again in May 2014 to test other pointing models and assess the telescope's ability to point with enough accuracy to permit the efficient use of speckle interferometry. Results show that accurate collimation is a pre-requisite for such accuracy. Once attained, the telescope performs extremely well.

Quantum Chemical: New name and focus for National Distillers

Energy Technology Data Exchange (ETDEWEB)

Reisch, M.S.

1988-03-14

This article explains why the National Distillers and Chemical Corporation has narrowed its focus on petrochemicals and energy. At one time the company had diversified into wine and spirits, insurance, metals, chemicals and energy. However, the company decided to reexamine where its commitments should be. It decided to stick with chemicals and energy because it could be a leader in these fields and not in its other interests. The article explains how the new company, Quantum Chemical, is doing and where it is headed in the future.

Evaluation of physico-chemical characteristics of groundwater of Company Bagh pumping station and its six distribution points in old Jammu City, India.

Science.gov (United States)

Khajuria, Meenakshi; Dutta, S P S

2011-10-01

To assess water quality of Company Bagh pumping station and its six distribution points, viz. Parade Ground, Mohalla Paharian, Purani Mandi, Malhotrian Street, Raghunathpura and Hari Market in old Jammu city of India, water parameters viz. temperature, turbidity, pH, electrical conductivity, free carbon dioxide, dissolved oxygen, biochemical oxygen demand, chemical oxygen demand, bicarbonate, chloride, calcium, magnesium, total hardness, sodium, potassium, sulphate, silicate, nitrate, phosphate, iron, copper, zinc, lead and chromium were analyzed during the years 2000-2001/2001-2002. There was alteration in water quality parameters in the distribution system caused by entry of sewage, soil, etc. through dislocation, cracks, valve regulators/turncock, defective joints, breakage, etc. in the pipes through crossing and deposits of biofilms inside the pipes, dead ends and their degradation through microbes. Comparison of water quality with National and International Standards revealed that all the parameters were within permissible limits of drinking water standards. Water Quality Index (WQI) of various physico-chemical parameters revealed that the water of Company Bagh pumping station and its six distribution points was fit for human consumption as it was found under the category of good (WQI < 50).

Self pierce riveting in the car body construction; Stanznieten im Karosserieleichtbau

Energy Technology Data Exchange (ETDEWEB)

Ahlers-Hestermann, G. [Boellhoff GmbH, Bielefeld (Germany)

1999-09-01

As an alterantive to spotwelding, self pierce riveting becomes more and more important in light weight automotive body constructions. The difficulties or impossibility of spotwelding Aluminium and High Tensile Strength Steel or material mixtures accelerated this development. Even plastic material can be joined to metal. Important mechanical properties such as fatigue and crash behaviour are improved. Costs are at the same level. Two examples of body parts in aluminium (Audi A6 bonnet and BMW 3 series front end) are described. (orig.) [German] Als Alternative zum Punktschweissen setzt sich das Stanznieten mit Halbhohlniet im Karosserieleichtbau mehr und mehr durch. Mit diesem Verfahren koennen verschiedene Materialen mit bis zu vier Lagen sicher verbunden werden. Dieser Beitrag der Boellhoff GmbH stellt das Verfahren vor und berichtet ueber zwei Beispiele aus der Praxis. (orig.)

When gender bumps into health and safety training: working conditions, readings and challenges drawn from a case study in an industrial chemicals company.

Science.gov (United States)

Vasconcelos, Ricardo; Teixeira, Sandra; Castelhano, Joana; Lacomblez, Marianne

2012-01-01

Health, safety and environmental issues are at present a social concern and an increasingly referred topic in the so called gender studies. This paper focuses on the relations between training, gender and risk perception in an industrial chemicals company, in Portugal, characterized by a mainly male population and by the presence of high occupational and environmental hazards. After characterizing the company and the training project that started up this reflection, the paper presents the reasons for its focus on gender followed by the essential methodological explanations: 14 interviews were made with male and female workers from the company; their content was transcribed from the audio recordings and it was systematically analyzed. A gender-attentive socio demographic analysis was also undertaken. Although at the beginning the company did not consider the gender issues as a problem nor was it the central topic of the training, which focused on the prevention of occupational and environmental hazards, the results reveal that the gender factor brought to light some working conditions, which so far have not been properly discussed within the group meetings. As a consequence, there is now room for the transformation of the representations on those working conditions.

A systematic review of animal predation creating pierced shells: implications for the archaeological record of the Old World.

Science.gov (United States)

Kubicka, Anna Maria; Rosin, Zuzanna M; Tryjanowski, Piotr; Nelson, Emma

2017-01-01

The shells of molluscs survive well in many sedimentary contexts and yield information about the diet of prehistoric humans. They also yield evidence of symbolic behaviours through their use as beads for body adornments. Researchers often analyse the location of perforations in shells to make judgements about their use as symbolic objects (e.g., beads), the assumption being that holes attributable to deliberate human behaviour are more likely to exhibit low variability in their anatomical locations, while holes attributable to natural processes yield more random perforations. However, there are non-anthropogenic factors that can cause perforations in shells and these may not be random. The aim of the study is compare the variation in holes in shells from archaeological sites from the Old World with the variation of holes in shells pierced by mollusc predators. Three hundred and sixteen scientific papers were retrieved from online databases by using keywords, (e.g., 'shell beads'; 'pierced shells'; 'drilling predators'); 79 of these publications enabled us to conduct a systematic review to qualitatively assess the location of the holes in the shells described in the published articles. In turn, 54 publications were used to assess the location of the holes in the shells made by non-human predators. Almost all archaeological sites described shells with holes in a variety of anatomical locations. High variation of hole-placement was found within the same species from the same site, as well as among sites. These results contrast with research on predatory molluscs, which tend to be more specific in where they attacked their prey. Gastropod and bivalve predators choose similar hole locations to humans. Based on figures in the analysed articles, variation in hole-location on pierced shells from archaeological sites was similar to variation in the placement of holes created by non-human animals. Importantly, we found that some predators choose similar hole locations to

Prevalence of contact allergy to metals in the European general population with a focus on nickel sulfate and piercings: The EDEN Fragrance Study.

Science.gov (United States)

Schuttelaar, Marie L A; Ofenloch, Robert F; Bruze, Magnus; Cazzaniga, Simone; Elsner, Peter; Gonçalo, Margarida; Naldi, Luigi; Svensson, Åke; Diepgen, Thomas L

2018-04-10

Studies on sensitization to metals in the general population are scarce. To determine the prevalence of sensitization to metals in the general population, and factors associated with nickel sensitization. In 5 European countries (The Netherlands, Germany, Italy, Portugal and Sweden), a random sample (N = 3119) from the general population (aged 18-74 years) was patch tested and interviewed by use of a questionnaire on exposure to metals, piercing, and jewellery. Overall, the age-standardized prevalences of sensitization to nickel, cobalt and chromium were, respectively, 14.5%, 2.1%, and 0.8%. The highest prevalence of nickel sensitization was seen in Portugal (18.5%) and the lowest (8.3%) in Sweden. The prevalence of cobalt sensitization varied between 3.8% (The Netherlands) and 0.9% (Italy), and the prevalence of chromium sensitization varied between 1.3% (Portugal) and 0.2% (Sweden). Significant associations were observed between nickel allergy and female sex (odds ratio [OR] 5.19; 95% confidence interval [95%CI]: 3.99-6.74), past piercing use (OR 3.86; 95%CI: 2.85-5.24), and currently having ≥3 piercings (OR 5.58; 95%CI: 4.02-7.76). The prevalence of sensitization to metals in the European general population was high, mostly because of nickel. The lowest prevalence of contact allergy to nickel and chromium observed in Sweden supports the effectiveness of long-standing regulation. © 2018 The Authors. Contact Dermatitis published by John Wiley & Sons Ltd.

Dr Jerome Pierce Webster (1888-1974): Surgeon, historian, campaigner, and 'the father of plastic surgery education'.

Science.gov (United States)

Wigley, Catrin H

2016-09-28

Dr Jerome Pierce Webster is best remembered as the 'founder of plastic surgery education in the United States' on the basis of developing his nation's first plastic surgery residency programme, his role in the founding of the American Board of Plastic Surgery, and, more generally, his influence in professionalising this subspecialty. He also deserves to be remembered for his extensive missionary work in China, his publications as a successful bibliographer, and as an accomplished historian. © The Author(s) 2016.

SPR Characteristics Curve and Distribution of Residual Stress in Self-Piercing Riveted Joints of Steel Sheets

OpenAIRE

Haque, Rezwanul; Wong, Yat C.; Paradowska, Anna; Blacket, Stuart; Durandet, Yvonne

2017-01-01

Neutron diffraction was used to describe the residual stress distributions in self-piercing riveted (SPR) joints. The sheet material displayed a compressive residual stress near the joint, and the stress gradually became tensile in the sheet material far away from the joint. The stress in the rivet leg was lower in the thick joint of the softer steel sheet than in the thin joint of the harder steel sheet. This lower magnitude was attributed to the lower force gradient during the rivet flaring...

77 FR 47115 - Manufacturer of Controlled Substances; Notice of Application; Cayman Chemical Company

Science.gov (United States)

2012-08-07

...)-propylthiophenethylamine I (7348). Marihuana (7360) I Tetrahydrocannabinols (7370) I Mescaline (7381) I 3,4,5... (1205) II The company plans to manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol. In...

A Reassessment of George Pierce Baker's "The Principles of Argumentation": Minimizing the Use of Formal Logic in Favor of Practical Approaches

Science.gov (United States)

Bordelon, Suzanne

2006-01-01

In this article, the author demonstrated how recent histories relied primarily on previous accounts and one textbook to characterize George Pierce Baker's work. This narrow assessment of "The Principles of Argumentation" limits one's understanding of his contribution to argumentation theory and pedagogy. Similarly, one has seen the need for care…

Tatuagens, Piercings e Diversidade Cultural: o que gestores dizem sobre esse tema?

Directory of Open Access Journals (Sweden)

Flávia Lorenne Sampaio Barbosa

2016-12-01

Full Text Available A diversidade cultural, representada pela utilização de tatuagens e piercings, possui variados impactos nos fenômenos sociais. No âmbito organizacional, sua gestão propicia potencialidades, especialmente como oportunidade para harmonizar ambientes corporativos e agregar valor competitivo. A pesquisa investiga a percepção sobre a empregabilidade de pessoas adeptas à tatuagens e piercings no contexto da gestão da diversidade cultural. Realizou-se pesquisa de campo com 8 empresários de uma cidade do interior do estado do Piauí, por meio de entrevistas semiestruturadas, analisadas com suporte na análise de conteúdo, especificamente, análise relacional. Com auxílio do software Atlas ti, categorizou-se as entrevistas em torno da gestão da diversidade cultural e duas subcategorias: cultura organizacional, formada pela dimensão valores sobre a diversidade e relações interpessoais; e resultados, formada pelas dimensões imagem e objetivos organizacionais. Constata-se que nas empresas do estudo não há gestão da diversidade, haja vista que os valores pessoais e organizacionais ainda não incorporaram valores culturais da diversidade. Em relação à empregabilidade, os objetivos institucionais refletidos nas políticas de gestão de pessoas, condicionam as competências, habilidades e atitudes profissionais ao atendimento de normas prescritas, reduzindo as possibilidades de gestão do potencial da diversidade na organização, em função do recrutamento e seleção de um perfil ideal. Acredita-se que pesquisas em outras contextos, inclusive de natureza comparativa, pode agregar novos pontos de vista e ampliar a discussão da gestão da diversidade no âmbito de sua afirmação como prática capaz de transformar organizações em espaços de maior acolhimento e mais competitivos

Recent Results from Analysis of Flow Structures and Energy Modes Induced by Viscous Wave around a Surface-Piercing Cylinder

Directory of Open Access Journals (Sweden)

Giancarlo Alfonsi

2017-01-01

Full Text Available Due to its relevance in ocean engineering, the subject of the flow field generated by water waves around a vertical circular cylinder piercing the free surface has recently started to be considered by several research groups. In particular, we studied this problem starting from the velocity-potential framework, then the implementation of the numerical solution of the Euler equations in their velocity-pressure formulation, and finally the performance of the integration of the Navier-Stokes equations in primitive variables. We also developed and applied methods of extraction of the flow coherent structures and most energetic modes. In this work, we present some new results of our research directed, in particular, toward the clarification of the main nonintuitive character of the phenomenon of interaction between a wave and a surface-piercing cylinder, namely, the fact that the wave exerts its maximum force and exhibits its maximum run-up on the cylindrical obstacle at different instants. The understanding of this phenomenon becomes of crucial importance in the perspective of governing the entity of the wave run-up on the obstacle by means of wave-flow-control techniques.

Health assessment for Maywood Chemical Company, Maywood, Bergen County, New Jersey, Region 2. CERCLIS No. NJD980529762. Final report

International Nuclear Information System (INIS)

1990-01-01

The Health Assessment for the Maywood Chemical Company Site includes the Maywood Interim Storage Site (MISS), the Ballod property, the Scanel site, residential properties, and the Sears warehouse and its adjacent properties, all of which are located in the towns of Maywood and Rochelle Park of Bergen County, New Jersey. These sites are at different investigative or remediation stages under the auspices of both the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Energy (DOE). The EPA is responsible for chemical characterization and cleanup operations, whereas the DOE is primarily in charge of radiologic analysis and remediation. On the basis of the information reviewed, ATSDR and NJDOH have concluded that the Maywood Chemical site is of public health concern because humans have probably been exposed to hazardous substances at concentrations that may result in adverse health effects. As noted in the Environmental Contamination and Physical Hazards section above, human exposure to chemical and radiological contamination is probably occurring and has probably occurred in the past via the use of contaminated groundwater and contact with contaminated soils. Before suspected areas of contamination are developed, both on-site contamination and the potential off-site migration of contaminants need to be fully evaluated. Developing an area, without characterizing potential contamination could lead to an adverse impact on the public health

Developments in the strategic planning of the major oil companies

International Nuclear Information System (INIS)

Jenkins, Gilbert

2000-01-01

This paper focuses on the changes in strategic planning of the major oil companies since the 1970s, and considers the reorganisations of the companies, and upstream and downstream planning. New directions for the major companies downstream operation in the retail and aviation sectors, and the influence of the BP/AMOCO/ARCO/BURMAH, EXXON/MOBIL and TOTAL/FINA/ELF mergers on the international oil industry are explored. Tables illustrating the earnings of the major oil companies for upstream and downstream operations, and chemicals in 1999, and for BP UK exploration and production, and refining and marketing profits (quarterly) for 1983-2000 are presented

Educational Objectives and the Learning Domains: A New Formulation [And] Summary: Pierce-Gray Classification Model for the Cognitive, Affective and Psychomotor Domains.

Science.gov (United States)

Gray, Charles E.; Pierce, Walter D.

This paper examines and summarizes the "Pierce-Gray Classification Model for the Cognitive, Affective, and Psychomotor Domains," a model developed for the classification of educational objectives. The classification system was developed to provide a framework that teachers could use as a guide when developing specific instructional objectives for…

Japan's big trading companies find themselves underemployed

International Nuclear Information System (INIS)

Coeyman, M.

1992-01-01

Japan's sogoshosha - its large trading companies - are fighting their way through an identity crisis. Originally established to help connect Japanese products and companies with offshore customers and a global market, the sogoshosha suddenly find that they are no longer in demand. The trading companies were originally intermediaries, says Yasunori Masuda, v.p. of Mitsui's chemical dividion (New York). But now we are less intermediaries and more organizers of joint ventures. Mitsubishi has a position in Saudi Arabia in methanol, ethylene glycol, and polyethylene (PE), currently being expanded. More recently the company teamed up with Pequiven, Venezuela's state-owned petrochemicals firm, on a 2,000-m.t./day methanol plant to be completed by the end of 1993 at Jose. Sone says Mitsubishi plans to market the methanol in the US Mitsubishi is also working on a feasibility study for a chlor-alkali/ethylene dichloride venture with Pequiven. Mitsubishi has jointed with five Japanese trading companies - Itochu, Marubeni, Mitsui, Sumitomo, and Nissho Iwai - to build a 450,000-m.t./year ethylene plant in China

[Starting with camphor--the progress of Nippon Fine Chemical].

Science.gov (United States)

Kimura, Osamu

2010-01-01

In 1918, Nippon Fine Chemical Co., Ltd. (NFC) was founded under the name, Nippon Camphor Co., Ltd. for the purpose of unifying the camphor business throughout Japan. The company manufactured purified camphor as a government-monopolized good. Camphor was used as a plasticizer for nitrocellulose, as a moth repellent, as an antimicrobial substance, as a rust inhibitor, and as an active ingredient in medicine. It was also a very important good exported in order to obtain foreign currency. Later on, after World War II and the abolition of the camphor monopoly, the company started manufacturing products related to oils and fats, including higher fatty acids, and expanded its business by developing a new field of chemical industry. In 1971 the company changed its name to Nippon Fine Chemical Co., Ltd., and made a new start as a diversified fine chemicals company. Recently, the fine chemicals division of NFC has concentrated on rather complex molecules, such as active pharmaceutical ingredients, and other chemicals. Since 2000, NFC have started to supply "Presome", precursors of liposome DDS drugs. NFC is strengthening marketing strategies in foreign countries with unique technologies and products.

Modification of the pierce instability of the electron flow in a diode with an external electromagnetic action

International Nuclear Information System (INIS)

Melezhik, O.G.; Pashchenko, A.V.; Romanov, S.S.; Shapoval, I.M.

2014-01-01

The stability of electron flow passage through the diode with a neutralized space charge has been investigated on the basis of the first-order approximation for hydrodynamic and Maxwell equations. Classification of solutions to the equations was developed in accordance with the magnitude and nature (potential or eddy) of the electric field arising at the diode cathode. The stability regions for these states have been found. It is shown that the presence of external electromagnetic action makes the stability region narrower than that predicted by Pierce.

Business Strategy Formulation By Shareholders and Company Management using The Analytical Network Process (ANPBusiness Strategy Formulation by Shareholders and Company Management Using Analytical Network Process (ANP

Directory of Open Access Journals (Sweden)

Faizal Faizal

2016-11-01

Full Text Available This research aimed to identify the business strategy formulation by the shareholders and the management of the company. Ten companies were selected to be the objects of this research. Those companies were the information technology, telecommunication, printing, mining, construction and chemical companies in Indonesia. The research was conducted by using the Analytical Network Process (ANP and considering the chosen respondents as the decision makers (experts of those companies. The respondents were chosen by using the non-probabilitty sampling method. The result shows that the roles of the company managements are considered m ore influental (0,57143 than the roles of the shareholders (0,28571. From the output of stakeholder’s condition, the best-stratified priority strategies are differentiation (0,600515, cost of leadership (0,230754 and focus (0,168731.

TANGGUNG JAWAB ORGAN PERSEROAN TERBATAS DALAM KASUS KEPAILITAN

Directory of Open Access Journals (Sweden)

Siti Hapsah Isfardiyana

2015-06-01

Full Text Available Abstract This paper aims to determine the responsibility of the Company's internal organs, namely the shareholders, Directors and Commissioners, if the Company suffered a loss to not be able to pay its debts to creditors and eventually bankrupted due to improper legal organ of the Company while the Company Indonesia adopts a separate entity and limited liability. However, limited liability can be changed to unlimited liability by piercing the corporate viel abusing his authority when organs Company. Authority Board of Directors and Commissioner based the principle of fiduciary duty. In this study the authors will use the method of normative conceptual approach that moved from the separate entity doctrine, limited liability, fiduciary duty, and piercing the corporate viel to look for suitability in laws and crustaceans. Accountability organs according to the Company's separate entity, limited liability, fiduciary duty, and piercing the corporate viel has been set in the laws and regulations. Each organ can be held accountable if found guilty of negligence or willful misconduct that led to the bankruptcy of the Company. Shareholders applied Article 3 paragraph (2 of the PT, the Board of Directors subject to Article 104 paragraph (2 of the PT, the Commissioner subject to Article 115 Paragraph (1 and paragraph (2 of the PT. Board of Directors and the Commissioner can also be charged with Article 1365 and 1366 of the Civil Code. In addition, the Criminal Code also can ensnare the Board of Directors and Commissioners with Article 398 and 399 of the Criminal Code. Key words: responsibility, organ, bankruptcy   Abstrak Tulisan ini bertujuan untuk mengetahui tanggung jawab organ Perseroan yaitu pemegang saham, Direksi dan Komisaris, apabila Perseroan mengalami kerugian hingga tidak bisa membayar utang-utangnya kepada kreditor dan akhirnya dipailitkan akibat kesalahan organ Perseroan sedangkan hukum Perseroan Indonesia menganut sistem separate entity dan

Domino effects within a chemical cluster: a game-theoretical modeling approach by using Nash-equilibrium.

Science.gov (United States)

Reniers, Genserik; Dullaert, Wout; Karel, Soudan

2009-08-15

Every company situated within a chemical cluster faces domino effect risks, whose magnitude depends on every company's own risk management strategies and on those of all others. Preventing domino effects is therefore very important to avoid catastrophes in the chemical process industry. Given that chemical companies are interlinked by domino effect accident links, there is some likelihood that even if certain companies fully invest in domino effects prevention measures, they can nonetheless experience an external domino effect caused by an accident which occurred in another chemical enterprise of the cluster. In this article a game-theoretic approach to interpret and model behaviour of chemical plants within chemical clusters while negotiating and deciding on domino effects prevention investments is employed.

Hydrographs showing groundwater levels for selected wells in the Puyallup River watershed and vicinity, Pierce and King Counties, Washington

Science.gov (United States)

Lane, R.C.; Julich, R.J.; Justin, G.B.

2013-01-01

Hydrographs of groundwater levels for selected wells in and adjacent to the Puyallup River watershed in Pierce and King Counties, Washington, are presented using an interactive Web-based map of the study area to illustrate changes in groundwater levels on a monthly and seasonal basis. The interactive map displays well locations that link to the hydrographs, which in turn link to the U.S. Geological Survey National Water Information System, Groundwater Site Inventory System.

Pierce-Wiggler electron beam system for 250 GHz GYRO-BWO: Final report

International Nuclear Information System (INIS)

Pirkle, D.R.; Alford, C.W.; Anderson, M.H.; Garcia, R.F.; Legarra, J.R.; Nordquist, A.L.

1989-01-01

This final report summarizes the design and performance of the VUW-8028 Pierce-Wiggler electron beam systems, which can be used to power high frequency gyro-BWO's. The operator's manual for this gyro-BWO beamstick is included as appendix A. Researchers at Lawrence Livermore National Laboratory (LLNL) are developing a gyro-BWO with a center frequency of 250 GHz, 6% bandwidth, and 10 kV peak output power. The gyro-BWO will be used to drive a free electron laser amplifier at LLNL. The electron beam requirements of the gyro-BWO application are: Small beam size, .100 inch at 2500 gauss axial magnetic field; a large fraction of the electron energy in rotational velocity; ability to vary the electrons' axial velocity easily, for electronic tuning; and low velocity spread i.e. little variation in the axial velocities of the electrons in the interaction region. 1 ref., 13 figs

Superfund record of decision (EPA Region 4): Marzone Inc. /Chevron Chemical Company Superfund Site, Operable Unit 1, Tifton, GA, September 1994

Energy Technology Data Exchange (ETDEWEB)

1994-09-30

This decision document (Record of Decision) presents the selected remedial action for the Marzone, Inc./Chevron Chemical Company Site in Tift County, Georgia. EPA has organized the work at this Site into two phases or operable units (OUs). Operable Unit No. 1 involves contamination on the 1.68-acre former Marzone pesticide blending area, part of the Slack Property, and railroad drainage ditch past the southwest corner of the horse pasture, and contaminated groundwater related to the Site. This first operable unit is broken down into two separate remedies; one for groundwater and the other for soil.

The Commission White Paper on a Strategy for a Future EU Chemicals Policy: the view of European companies of American parentage.

Science.gov (United States)

Montfort, Jean-Philippe

2003-04-01

After years of good service, EU legislation on chemicals is currently subject to a major review. This process, initiated by the Council of Ministers at Chester in April 1998, will soon lead to new legislative proposals. In the meantime, a review of the Commission's White Paper on "Strategy for a Future Chemicals Policy," published in February 2001, clearly shows that the regulatory landscape in this area will be significantly reshaped and that a new burden will be imposed on industry to demonstrate that the production and use of chemicals indeed conform to high standards of protection of human health and the environment. In the view of industry, on both sides of the Atlantic, while the objectives of the proposed reform can be supported, the measures proposed in the White Paper to implement these objectives are not properly balanced and will lead to substantial societal and economic drawbacks, unless significant adjustments are made. The purpose of this article is to present the pitfalls and difficulties of the reform as they are perceived by the EU Committee of the American Chamber of Commerce in Brussels, an organization that regroups about 150 European companies of American parentage, belonging to a broad range of European business sectors, including producers and users of chemicals. In view of the transatlantic and cross-business character of its membership, the EU Committee offers a different perspective on the debate.

Bacteria, taxonomic code, and other data collected from G.W. PIERCE in North Atlantic Ocean from sediment sampler; 20 February 1976 to 23 March 1976 (NODC Accession 7601642)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Bacteria, taxonomic code, and other data were collected using sediment sampler and other instruments in the North Atlantic Ocean from G.W. PIERCE. Data were...

Numerical simulation of self-piercing riveting process (SRP using continuum damage mechanics modelling

Directory of Open Access Journals (Sweden)

Nicola Bonora

2018-04-01

Full Text Available The extended Bonora damage model was used to investigate joinability of materials in self-piercing riveting process. This updated model formulation accounts for void nucleation and growth process and shear-controlled damage which is critical for shear fracture sensitive materials. Potential joint configurations with dissimilar materials have been investigated computationally. In particular the possible combination of DP600 steel, which is widely used in the automotive industry, with AL2024-T351, which is known to show shear fracture sensitivity, and oxygen-free pure copper, which is known to fail by void nucleation and growth, have been investigated. Preliminary numerical simulation results indicate that the damage modelling is capable to discriminate potential criticalities occurring in the SPR joining process opening the possibility for process parameters optimization and screening of candidate materials for optimum joint

Influence of aluminium sheet surface modification on the self-piercing riveting process and the joint static lap shear strength

OpenAIRE

Li, Dezhi

2017-01-01

Self-piercing riveting (SPR) has been widely used in automotive as one of the major joining technologies for aluminium structures due to its advantages over some of the more traditional joining technologies. Research has shown that friction is a very important factor that influences both the riveting process and the joint strength for SPR, but these influences have not been fully understood. In this paper, AA5754 sheets with different surface textures, such as original with solid wax, hot wat...

Influence of heat treatment on fatigue performances for self-piercing riveting similar and dissimilar titanium, aluminium and copper alloys

OpenAIRE

Zhang, Xianlian; He, Xiaocong; Xing, Baoying; Zhao, Lun; Lu, Yi; Gu, Fengshou; Ball, Andrew

2016-01-01

The fatigue performances of self-piercing riveting (SPR) joints connecting similar and dissimilar sheets of TA1 titanium alloy (TA1), Al5052 aluminium alloy (Al5052) and H62 copper alloy (H62) were studied in this paper. The specimens of similar TA1 sheets treated with stress relief annealing were prepared to investigate the influence of relief annealing on the mechanical properties of SPR joints. Fatigue tests were conducted to characterize the fatigue lives and failure modes of the joints. ...

the doctrine of piercing the corporate veil

African Journals Online (AJOL)

eliasn

below (as stated in Stephen Griffin, Company law: fundamental principles).4 ..... opportunities, the nation's economic and financial growth, stability and ..... shareholders, common officers, centralized accounting, payment of wages by one.

A variation of Musculocutaneous nerve without piercing the coracobrachialis muscle while communicating to the median nerve: A case report and literature review

Directory of Open Access Journals (Sweden)

Hamid Tayefi Nasrabadi

Full Text Available Introduction: Anatomical variations of the peripheral nervous system may have not any clinical signs and symptoms. One of these variations belongs to the Musculocutaneous nerve. However, a good knowledge of nerve pathways and their variations is very important for surgeons in post-traumatic evaluations, exploratory interventions, and/or administration of neuromuscular blocks in axillary region in order to surgical therapies. Presentation of case: This report describes a case of variation of the musculocutaneous nerve which was observed in an old Iranian male cadaver during routine educational dissection (Fig. 1. Discussion and Conclusion: Anatomically, in the axilla region, the Musculocutaneous nerve is originated of the lateral cord of brachial plexus, then, by piercing the coracobrachialis muscle arrives enters to anterior compartment of the arm. But, in the present report, we observed that the Musculocutaneous nerve without piercing the coracobrachialis muscle has arrived in the left arm, then communicated to the Median nerve. To exploratory interventions of the arms for peripheral nerve repair and surgical therapies, a good knowledge of nerve pathways helps to surgeons for preventing possible mistakes during surgery. Keywords: Brachial plexus, Musculocutaneous nerve, Median nerve, Variation, Anatomy, Dissection

[Tattoos and piercings: motives for body modification in women suffering from borderline symptomatology].

Science.gov (United States)

Höhner, Gesche; Teismann, Tobias; Willutzki, Ulrike

2014-02-01

Do women suffering from borderline symptomatology differ from women without these symptoms regarding their motives for body modifications?A sample of 289 women with body modifications were questioned about their tattoos, piercings and motives for body modifications as well as about symptoms of borderline personality disorder. Women with borderline symptomatology were compared to women without borderline symptomatology concerning the extent of and motives for body modification.The 2 groups showed no differences in regard to amount and extent of body modifications. The "borderline"-group considered individuality, coping and management of negative life-events to be more crucial reasons for body modification than the non-borderline females.The degree of a person's body modification is not a feasible indicator for psychopathological strain. Though, for people with borderline tendency body modification may serve as a coping strategy similar to self-injury. © Georg Thieme Verlag KG Stuttgart · New York.

某精细化工企业清洁生产审核实践研究%Cleaner Production Audit on A Fine Chemical Company

Institute of Scientific and Technical Information of China (English)

冯俊丽; 张时佳

2016-01-01

This paper takes the cleaner production of a company as example to expound the necessity and practical signifi-cance of carrying out cleaner production audit in fine chemical industry. According to eight existing issues of this company, the study provides practical low and high cost clean production project, totally 28 items. After calculating the economic, environmen-tal and social benefit of each project,the practical values of cleaner production audit to a company were pointed out, giving direc-tion of energy-saving emission reduction and low carbon development. This audit discusses the specific practice of cleaner pro-duction in fine chemical industry and it has guiding significance of practicing cleaner production in this domain.%以某企业的清洁生产审核为例,阐述分析精细化工行业开展清洁生产审核的必要性及实践意义.针对该企业存在的八方面问题,提出切实可行的无低费及中高费清洁生产方案共计28项,经核算各方案的经济、环境、社会效益,指出企业开展清洁生产审核的实际价值,为企业节能减排、低碳发展指明方向.本次审核初步探讨了清洁生产在精细化工行业的具体实践,对该行业清洁生产的践行具有一定的指导意义.

Influence of local surface texture by tool impression on the self piercing\\ud riveting process and the static lap shear strength

OpenAIRE

Li, Dezhi

2017-01-01

To increase fuel efficiency and reduce emission, aluminium alloys have been increasingly used in automotive body-in-white structures for lightweighting. Due to its advantages over some of the more traditional joining technologies, self-piercing riveting (SPR) has been widely used for these lightweight structures. Research has showed that friction is a very important factor that influences both the riveting process and joint strength for SPR, but these influences have not been fully understood...

Design of convergent pierce electron gun of accelerator for radiation sterilization by the method of synthesis

International Nuclear Information System (INIS)

Kong Xiaoxiao; Li Quanfeng

2003-01-01

A synthesis technique for the preliminary design of convergent Pierce electron guns is introduced briefly which has a series of advantages over the traditional methods. A thermal cathode electron gun used in the accelerator for radiation sterilization with the synthesis method is redesigned, and the validity of this method is proved. Based on the preliminary design parameters given by the synthesis method, a simulating calculation program, EGUN, was used in the numerical figure design of the focusing electrode and the anode. The final results can meet the engineering requirement as the current being 1A, the normalized emittance being less than 4 mm·mrad, and the final current density showing uniformity

Formerly utilized MED/AEC sites, Remedial Action Program: radiological survey of the Hooker Chemical Company, Niagara Falls, New York. Final report

International Nuclear Information System (INIS)

1977-01-01

Results of a radiological survey of a portion of the Hooker Chemical Company, Niagara Falls, New York, are presented. The survey was conducted over 5.5-acres in which uranium-bearing materials were handled in the early 1940's. The survey included direct measurements of alpha, beta-gamma, and external gamma radiation throughout the site, measurement of transferable alpha and beta contamination levels in the buildings, determination of uranium and radium concentrations in the soild on the site, measurement of radon and radon daughter concentrations in the buildings, and determination of radionuclide concentrations in surface water samples. The results of the survey indicate that radiation levels throughout the site are within pertinent guidelines for unrestricted release of the property

Results of the radiological survey at the Napp Chemical Company, 199 Main Street, Lodi, New Jersey (LJ076)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, the Napp Chemical Company, 199 Main Street, Lodi, New Jersey (LJ076), was conducted during 1987. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area. 4 refs., 8 figs., 3 tabs

75 FR 42432 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-07-21

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... abandonment of facilities by Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas... resources, fisheries, and wetlands; Cultural resources; Vegetation and wildlife; Endangered and threatened...

A new approach using the Pierce two-node model for different body parts.

Science.gov (United States)

Foda, Ehab; Sirén, Kai

2011-07-01

This paper presents a new approach, in applying the Pierce two-node model, to predict local skin temperatures of individual body parts with good accuracy. In this study, local skin temperature measurements at 24 sites on the bodies of 11 human subjects were carried out in a controlled environment under three different indoor conditions (i.e. neutral, warm and cold). The neutral condition measurements were used to adjust the local skin set-points in the model for each body part. Additional modifications to the calculation algorithm were introduced corresponding to different body parts. The local core set-points were then calculated, using a line search method, as the input values that allow the model to predict the skin temperatures with maximum deviation of ±0.1°C for the neutral condition. The model predictability was verified for the other two indoor conditions, and the results show that the modified model predicts local skin temperatures with average deviation of ±0.3°C.

Experimental study on combined cold forging process of backward cup extrusion and piercing

Science.gov (United States)

Henry, Robinson; Liewald, Mathias

2018-05-01

A reduction in material usage of cold forged components while maintaining the functional requirements can be achieved using hollow or tubular preforms. These preforms are used to meet lightweight requirements and to decrease production costs of cold formed components. To increase production efficiency in common multi-stage cold forming processes, manufacturing of hollow preforms by combining the processes backward cup extrusion and piercing was established and will be discussed in this paper. Corresponding investigations and experimental studies are reported in this article. The objectives of the experimental investigations have been the detection of significant process parameters, determination of process limits for the combined processes and validation of the numerical investigations. In addition, the general influence concerning surface quality and diameter tolerance of hollow performs are discussed in this paper. The final goal is to summarize a guideline for industrial application, moreover, to transfer the knowledge to industry, as regards what are required part geometries to reduce the number of forming stages as well as tool cost.

Simulation of the Groundwater-Flow System in Pierce, Polk, and St. Croix Counties, Wisconsin

Science.gov (United States)

Juckem, Paul F.

2009-01-01

Groundwater is the sole source of residential water supply in Pierce, Polk, and St. Croix Counties, Wisconsin. A regional three-dimensional groundwater-flow model and three associated demonstration inset models were developed to simulate the groundwater-flow systems in the three-county area. The models were developed by the U.S. Geological Survey in cooperation with the three county governments. The objectives of the regional model of Pierce, Polk, and St. Croix Counties were to improve understanding of the groundwaterflow system and to develop a tool suitable for evaluating the effects of potential water-management programs. The regional groundwater-flow model described in this report simulates the major hydrogeologic features of the modeled area, including bedrock and surficial aquifers, groundwater/surface-water interactions, and groundwater withdrawals from high-capacity wells. Results from the regional model indicate that about 82 percent of groundwater in the three counties is from recharge within the counties; 15 percent is from surface-water sources, consisting primarily of recirculated groundwater seepage in areas with abrupt surface-water-level changes, such as near waterfalls, dams, and the downgradient side of reservoirs and lakes; and 4 percent is from inflow across the county boundaries. Groundwater flow out of the counties is to streams (85 percent), outflow across county boundaries (14 percent), and pumping wells (1 percent). These results demonstrate that the primary source of groundwater withdrawn by pumping wells is water that recharges within the counties and would otherwise discharge to local streams and lakes. Under current conditions, the St. Croix and Mississippi Rivers are groundwater discharge locations (gaining reaches) and appear to function as 'fully penetrating' hydraulic boundaries such that groundwater does not cross between Wisconsin and Minnesota beneath them. Being hydraulic boundaries, however, they can change in response to

Chemical industrial areas and their dynamic danger behaviour

NARCIS (Netherlands)

Reniers, Genserik L L; Audenaert, Amaryllis; Dullaert, W.; Soudan, K.

2007-01-01

Chemical industrial areas or so-called chemical clusters consist of various companies situated next to each other. Such areas are composed of hundreds of chemical installations exhibiting danger to a certain degree for initiating or continuing knock-on effects. In this paper, a methodology to model

Ballistic Limit of High-Strength Steel and Al7075-T6 Multi-Layered Plates Under 7.62-mm Armour Piercing Projectile Impact

OpenAIRE

Rahman, N. A.; Abdullah, S.; Zamri, W. F. H.; Abdullah, M. F.; Omar, M. Z.; Sajuri, Z.

2016-01-01

Abstract This paper presents the computational-based ballistic limit of laminated metal panels comprised of high strength steel and aluminium alloy Al7075-T6 plate at different thickness combinations to necessitate the weight reduction of existing armour steel plate. The numerical models of monolithic configuration, double-layered configuration and triple-layered configuration were developed using a commercial explicit finite element code and were impacted by 7.62 mm armour piercing projectil...

75 FR 13524 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-03-22

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... notice that on March 5, 2010, Northern Natural Gas Company (Northern Natural), 1111 South 103rd Street, Omaha, Nebraska 68124- 1000, filed on behalf of itself and other owners, Southern Natural Gas Company...

Inventory of nanotechnology companies in Mexico

International Nuclear Information System (INIS)

Appelbaum, Richard; Zayago Lau, Edgar; Foladori, Guillermo; Parker, Rachel; Vazquez, Laura Liliana Villa; Belmont, Eduardo Robles; Figueroa, Edgar Ramón Arteaga

2016-01-01

This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications

Inventory of nanotechnology companies in Mexico

Science.gov (United States)

Appelbaum, Richard; Zayago Lau, Edgar; Foladori, Guillermo; Parker, Rachel; Vazquez, Laura Liliana Villa; Belmont, Eduardo Robles; Figueroa, Edgar Ramón Arteaga

2016-02-01

This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications.

Inventory of nanotechnology companies in Mexico

Energy Technology Data Exchange (ETDEWEB)

Appelbaum, Richard, E-mail: rich@global.ucsb.edu [University of California at Santa Barbara, MacArthur Foundation Chair in Sociology and Global & International Studies Co-PI, Center for Nanotechnology and Society, Social Science and Media Studies 2103 (United States); Zayago Lau, Edgar [Center for Research and Advanced Studies of the National Polytechnic Institute (CINVESTAV, Zacatenco)., Multidisciplinary Graduate Programs (Mexico); Foladori, Guillermo [Universidad Autónoma de Zacatecas. Latin American Nanotechnology & Society Network (ReLANS), Unidad Académica en Estudios del Desarrollo (Mexico); Parker, Rachel [Canadian Institute for Advanced Research, Research Programs (Canada); Vazquez, Laura Liliana Villa [Universidad Autónoma de Zacatecas (Mexico); Belmont, Eduardo Robles [UNAM, Institute for Research in Applied Mathematics and Systems (IIMAS) (Mexico); Figueroa, Edgar Ramón Arteaga [Universidad Autónoma de Zacatecas. Latin American Nanotechnology & Society Network (ReLANS), Unidad Académica en Estudios del Desarrollo (Mexico)

2016-02-15

This study presents an inventory of 139 nanotechnology companies in Mexico, identifying their geographic distribution, economic sector classification, and position in the nanotechnology value chain. We find that the principal economic sector of nanotechnology-engaged firms involves the manufacture of chemical products, which largely serve as means of production (primary or intermediate materials; instruments and equipment) for industrial processes. The methodology used in this analysis could be replicated in other countries without major modifications.

Application of neutron activation analysis to the corrosion study of gold coated studs used for piercing ears

International Nuclear Information System (INIS)

Saiki, M.; Rogero, S.O.; Costa, I.; Correa, O.V.; Higa, O.Z.

1998-01-01

Complete text of publication follows. Gold is known as a metal having little or no toxicity and it has been widely used for coating studs for ear piercing. However, for some people gold coated studs have caused serious allergy and inflammation problems. After piercing, the studs are usually kept in the ear lobes for at least one week, and during this period the stud surfaces in contact with the body fluids have caused swelling, pain and redness of the skin. Consequently, it is of great interest to evaluate if elements from the metallic substrate underneath the gold coatings migrate to the body fluids due to the corrosion and the presence of defects in gold coatings. The solutions for corrosion test were obtained by placing the gold coated studs in contact with the solutions of NaCl and of culture medium. Elemental analyses of these solutions by radioanalytical method of neutron activation analysis indicated the occurrence of substrate corrosion since the elements Cr, Fe, Ni and Zn were found in these solutions. These elements are substrate material components of alloys used to make the studs and they were quantified by X-ray fluorescence analysis. The defects of the coatings were also detected by scanning electron microscopy and energy dispersive spectroscopy analysis of the gold coated studs before and after the corrosion tests. Cytotoxicity studies indicated that after corrosion test the solution used was toxic in the culture cell assay. Among the elements quantified in the test solutions, Ni is considered responsible for most of allergic reactions. Results obtained in this work indicated the necessity to improve quality control of the coating process of studs and in the appropriate choice of material used as substrate

Relation Between Sustainability‑Related Communication and Competitiveness in the Chemical Industry

Directory of Open Access Journals (Sweden)

Jaroslava Hyršlová

2017-01-01

Full Text Available Interests of companies in the sustainability‑related communication have risen considerably in recent years. This paper focuses on the current state of sustainability‑related reporting in chemical industry companies registered in the Association of Chemical Industry in the Czech Republic. It deals with the form and the content of reporting, the importance of different stakeholders in this process as well as benefits of the sustainability‑related communication and its impacts on competitiveness of the company. This paper summarizes the results of a research executed in the year 2014. The results of the research showed that chemical industry companies were aware of the significance of sustainability‑related communication and they utilized various types of sustainability‑related reports for this communication. Companies prefer to report on the environmental and social aspects of their activities primarily in their annual reports, or they issue separate environmental reports. The research verified the relationship between the sustainability‑related communication and competitiveness. A suitable established high quality system of communication that provides sufficient information and meets the information requirements of the key stakeholders may significantly contribute to reputation improvement, to increased attractiveness of the company as an employer and thereby to maintain, to improve respectively, the level of a company’s competitiveness.

Chemical Data Reporting rule (CDR)

Data.gov (United States)

U.S. Environmental Protection Agency — This dataset contains information on chemicals that company's produce domestically or import into the United States during the principal reporting year. For the 2012...

SAFER - Company Snapshot - SAFER - Company Snapshot

Data.gov (United States)

Department of Transportation — The Company Snapshot is a concise electronic record of company identification, size, commodity information, and safety record, including the safety rating (if any),...

[Tatoos, piercing: body art? Body damage? Debasement of the body or return to a primitive way of life?].

Science.gov (United States)

Grognard, C

2006-01-01

Tatoos and piercing, though they might appear as something like a trend, if not a craze, remain for a majority minority and even fringe practices. For the adolescent, questing for his identity (no more a child, not yet an adult), the tegmental sign is a way of engraving in the flesh dramatic events of his existence. The body mark is a search for independence, a symbolic attainment of self-reliance, a way of severing the umbilical cord and of asserting oneself. In face of a life no longer under control, the body is an object at hand, on which self-will is almost unbridled... These body modifications testify to change.

Job Relocation is High in Chemical Industry.

Science.gov (United States)

Chemical and Engineering News, 1979

1979-01-01

The chances of an employee being relocated are higher in the chemical and plastics industries than in U.S. business as a whole. But the benefits provided by chemical and plastics companies to employees shifted to other locations are generally better than average. (Author/BB)

Open Innovation and Business Model: A Brazilian Company Case Study

Directory of Open Access Journals (Sweden)

Elzo Alves Aranha

2015-12-01

Full Text Available Open Innovation is increasingly being introduced in international and national organizations for the creation of value. Open innovation is a practical tool, requiring new strategies and decisions from managers for the exploitation of innovative activities. The basic question that this study seeks to answer is linked to the practice of open innovation in connection with the open business model geared towards the creation of value in a Brazilian company. This paper aims to present a case study that illustrates how open innovation offers resources to change the open business model in order to create value for the Brazilian company. The case study method of a company in the sector of pharma-chemical products was used. The results indicate that internal sources of knowledge, external sources of knowledge and accentuate working partnerships were adopted by company as strategies to offer resources to change the open business model in order to create value.

Orientation of sustainable management of chemical company with international activity

Directory of Open Access Journals (Sweden)

Valéria da Veiga Dias

2013-04-01

Full Text Available The search for new business possibilities, either through international activities and capture niche markets appear as a distinct trend among organizations that target growth. For this growing number of organizations intent on investing in new issues related to values such as citizenship, ethics and environmental concerns. There is the adoption of a more responsive to the community or even the acceptance of responsibility for the impacts of their production processes, inserting themselves in what was initially called the Social Responsibility within the business context and developed the concept of Elkington (1998 generated a discussion about a new movement that was called a sustainable paradigm. It was observed generally that sustainable management is still very close to supporting tools and not as part of the construction of corporate strategy although it is possible to realize that they seek a greater involvement in this direction when they start to review their strategies. This question can be perceived at different levels between the companies, but which shows the issue is the lack of direct indicators for investment and sustainable return. Sustainable management proved to be a source of opportunity for overseas business for the companies studied, as preparation for work with environmental legislation, global requirements, raw materials and environmentally friendly processes organizations prepared to market in the global sphere, and Brazil note that the innovative products for their production process and / or alternative raw material still do not get the spotlight. Acting in a sustainable manner enables the development of strategies agreed with conscious posture and changes in cultural terms in general, which can create new opportunities for those who can keep up with the global business scenario.

Optimizing the dosage of stabilizing chemical

OpenAIRE

Harjula, Tomi

2013-01-01

A chemical company provides chemical treatment at customer mill in paper industry. This thesis work was done to determine the optimum dosage of stabilizing chemical. The theoretical framework explains the basics of paper brightness and bleaching and how these topics are connected to each other. The knowledge gained is very valuable and can possibly be used in the future in other similar applications as well. This thesis work contains confidential back ground information. Key ...

Runaway chemical reaction exposes community to highly toxic chemicals

International Nuclear Information System (INIS)

Kaszniak, Mark; Vorderbrueggen, John

2008-01-01

The U.S. Chemical Safety and Hazard Investigation Board (CSB) conducted a comprehensive investigation of a runaway chemical reaction at MFG Chemical (MFG) in Dalton, Georgia on April 12, 2004 that resulted in the uncontrolled release of a large quantity of highly toxic and flammable allyl alcohol and allyl chloride into the community. Five people were hospitalized and 154 people required decontamination and treatment for exposure to the chemicals. This included police officers attempting to evacuate the community and ambulance personnel who responded to 911 calls from residents exposed to the chemicals. This paper presents the findings of the CSB report (U.S. Chemical Safety and Hazard Investigation Board (CSB), Investigation Report: Toxic Chemical Vapor Cloud Release, Report No. 2004-09-I-GA, Washington DC, April 2006) including a discussion on tolling practices; scale-up of batch reaction processes; Process Safety Management (PSM) and Risk Management Plan (RMP) implementation; emergency planning by the company, county and the city; and emergency response and mitigation actions taken during the incident. The reactive chemical testing and atmospheric dispersion modeling conducted by CSB after the incident and recommendations adopted by the Board are also discussed

Domino effects within a chemical cluster : A game-theoretical modeling approach by using Nash-equilibrium

NARCIS (Netherlands)

Reniers, Genserik; Dullaert, Wout; Karel, Soudan

2009-01-01

Every company situated within a chemical cluster faces domino effect risks, whose magnitude depends on every company's own risk management strategies and on those of all others. Preventing domino effects is therefore very important to avoid catastrophes in the chemical process industry. Given that

Safety management system in a Swiss chemical company

International Nuclear Information System (INIS)

Vouillamoz, R.

1996-01-01

Through the implementation of the fine chemical strategy, i.e. the manufacture of products with a higher value, the Lonza AG was confronted with a drastic increase of complexity in safety and disposal. In this connection, a concept of risk reduction was developed and carried out. This concept is based on 3 different steps: - prevention, - reduction, - provision. The details of these steps are explained here and illustrated with concrete examples. (author) 5 figs., tabs

Assesing the Effectiveness of Joint Companies in Russia: Industry-Specific Features

Directory of Open Access Journals (Sweden)

Elena Anatolyevna Fedorova

2015-06-01

Full Text Available The paper evaluates the effectiveness of joint and domestic companies using ROA (operational efficiency and DEA (technical efficiency methodologies. The technical efficiency was estimated in two ways: according to the classical scheme and taking into account spillover effects. The study was based on statements of Russian companies (23 567 joint enterprises and 14 653 companies without FDI for the period of 2008-2012. The authors used RusLana resource to get following information: balance sheets, profit and loss statements, capital structure, number of employees and regional affiliation. The study found that joint companies usually operate more effectively than domestic ones. The authors also conclude that the crisis has not caused severe damages to the average effectiveness by industries. More than that, Russian economy has positive horizontal and vertical FDI spillover effects which increase as time goes by. In 2012 the most efficient joint companies (in terms of technical efficiency belonged to the following industries: coke and petroleum production, chemical industry and metallurgy. The most ineffective ones included following: wholesale and retail trade, machinery and equipment production and agriculture

The surveys to the companies: A tool for the improvement of degrees

Directory of Open Access Journals (Sweden)

Montserrat Cruells Cadevall

2017-03-01

Full Text Available In scientific and technical degrees, the opinion of the final employers on the given subjects is really important. For this reason, the Quality Committee (CQ of the Faculty of Chemistry of the University of Barcelona prepared a survey for chemical, engineering and pharmaceutical companies asking about the academic training required by the companies. The survey consists of nine sections including items related to laboratory operations, chemical processes, calculation methods, management systems (quality, environment and safety or general management information. In addition, at the end of each section, a question inquires the companies about the competences shown by students in the items of the section. The results were compared with that of a similar survey carried out in 2007. The scores obtained, between 2 and 3, for all the items (score: 1, not important; 2, unimportant; 3, important; 4, very important, show that companies accept the training given to our students and the competences achieved by them. However, according to their opinion, it is possible to improve this training, especially in the subjects related to management (time, information, environment, quality, safety, etc.. Therefore, surveys are a good tool for the evaluation of the training achieved in our degrees and, consequently, for improving degrees and the teaching task, according the Quality Management System implemented in the Faculty of Chemistry.

77 FR 70189 - Manufacturer of Controlled Substances; Notice of Registration; Cayman Chemical Company

Science.gov (United States)

2012-11-23

... propylthiophenethylamine (7348). Marihuana (7360) I Tetrahydrocannabinols (7370) I Mescaline (7381) I 3,4,5... manufacture small quantities of marihuana derivatives for research purposes. In reference to drug code 7360 (Marihuana), the company plans to bulk manufacture cannabidiol. In reference to drug code 7370...

IMPLEMENTATION OF QUALITATIVE RULES IN COMPANY`S INFORMATION MANAGEMENT

Directory of Open Access Journals (Sweden)

Anna WOLNOWSKA

2012-07-01

Full Text Available In the article there were presented chosen issues of quality management. Important role of information and work processes in companies were emphasized . Based on eight rules of quality management, TQM standards and ideas of discipline pioneers like Deming, Juran, Crosby and Shewart, author has constructed way of using chosen rules and assumptions to company`s information circulation. Analogy, suggested by author, has not only emphasized importance of information as a company`s resource, but also has pointed to possibility of improving ways of managing this information.

Open Experimentation on Phenomena of Chemical Reactions via the Learning Company Approach in Early Secondary Chemistry Education

Science.gov (United States)

Beck, Katharina; Witteck, Torsten; Eilks, Ingo

2010-01-01

Presented is a case study on the implementation of open and inquiry-type experimentation in early German secondary chemistry education. The teaching strategy discussed follows the learning company approach. Originally adopted from vocational education, the learning company method is used to redirect lab-oriented classroom practice towards a more…

Chemical engineer in business; Kemikaru enjinia to bijinesu

Energy Technology Data Exchange (ETDEWEB)

Tsuchiya, Yasuaki

1999-05-05

It is Coca-Cola and General Electric Co. (GE) that the aggregate market value is drastically expanding in U.S.A. throughout over past of 15. Direct common point is not very much found to these 2 companies. During over of 15 years, the leadership was demonstrated as management top of both companies, 2 managers who drastically contributed to the enterprise value improvement are the chemical engineer graduate both. It does be not done either mere in which that both persons with the grounded ability of chemical engineering contributed to the enterprise value improvement of the dramatic was not accidental. It is the essence of the chemical engineering,'By discerning essence of the process, the appropriate countermeasure is passed' there was it for the basis of the management of both persons. (NEDO)

Contact sensitization to common haptens is associated with atopic dermatitis: new insight

DEFF Research Database (Denmark)

Thyssen, J P; Linneberg, A; Engkilde, K

2012-01-01

and questioned about AD Results: The variable "contact sensitization to common chemicals, but not nickel and thimerosal", was significantly associated with atopic dermatitis (OR=2.53; CI95%=1.59-4.04). The higher prevalence of contact sensitization was mainly driven by fragrance chemicals. In a sub......-analysis in non-pierced women, a positive association was also found for nickel sensitization. Nickel and thimerosal sensitization may introduce bias in data analysis since these allergies often develop following skin piercing where the skin compartments are bypassed. Discussion: We suspect that individuals...

SPR Characteristics Curve and Distribution of Residual Stress in Self-Piercing Riveted Joints of Steel Sheets

Directory of Open Access Journals (Sweden)

Rezwanul Haque

2017-01-01

Full Text Available Neutron diffraction was used to describe the residual stress distributions in self-piercing riveted (SPR joints. The sheet material displayed a compressive residual stress near the joint, and the stress gradually became tensile in the sheet material far away from the joint. The stress in the rivet leg was lower in the thick joint of the softer steel sheet than in the thin joint of the harder steel sheet. This lower magnitude was attributed to the lower force gradient during the rivet flaring stage of the SPR process curve. This study shows how the residual stress results may be related to the physical occurrences that happened during joining, using the characteristics curve. The study also shows that neutron diffraction technique enabled a crack in the rivet tip to be detected which was not apparent from a cross-section.

Towed underwater PIV measurement for free-surface effects on turbulent wake of a surface-piercing body

Directory of Open Access Journals (Sweden)

Dong Myung Seol

2013-09-01

Full Text Available In the present study, a towed underwater particle image velocimetry (PIV system was validated in uniform flow and used to investigate the free-surface effects on the turbulent wake of a simple surface-piercing body. The selected test model was a cylindrical geometry formed by extruding the Wigley hull's waterplane shape in the vertical direction. Due to the constraints of the two-dimensional (2D PIV system used for the present study, the velocity field measurements were done separately for the vertical and horizontal planes. Using the measured data at several different locations, it was possible to identify the free-surface effects on the turbulent wake in terms of the mean velocity components and turbulence quantities. In order to provide an accuracy level of the data, uncertainty assessment was done following the International Towing Tank Conference standard procedure.

Enforcement Alert: EPA Enforcement Efforts Focus on Prevention of Chemical Accidents

Science.gov (United States)

This Alert is intended to inform the industry that companies must take responsibility to prevent accidental releases of dangerous chemicals like anhydrous ammonia through compliance with CAA’s Chemical Accident Prevention Program.

The application of chemical leasing business models in Mexico.

Science.gov (United States)

Schwager, Petra; Moser, Frank

2006-03-01

being achieved through the development of company specific business models that implement the above-indicated Chemical Leasing concept with the support from the Mexican National Cleaner Production Centre (NCPC). The implementation of Chemical Leasing in Mexico has proven to be an efficient instrument in enhancing sustainable chemical management and significantly reducing emissions in Mexico. Several companies from the chemical industrial sector implement or agreed to implement chemical leasing business models. Based on the positive findings of the project, several Mexican companies started to negotiate contents of possible Chemical Leasing contracts with suitable business partners. The project further aimed at disseminating information on Chemical Leasing. It successfully attracted globally operating companies in the chemicals sector to explore possibilities to implement Chemical Leasing business models in Mexico. At the international level, the results of the UNIDO project were presented on 20th September 2005 during a side event of the Strategic Approach to International Chemicals Management (SAICM) Preparation Conference in Vienna. To facilitate the promotion and application of Chemical Leasing project at international level, UNIDO is currently developing a number of tools to standardize Chemical Leasing projects. These include, among others, Chemical leasing contract models; Chemical Leasing data base to find partners for chemical leasing; and guidelines to implement Chemical Leasing projects and work programmes.

Chemical Leasing business models and corporate social responsibility.

Science.gov (United States)

Moser, Frank; Jakl, Thomas; Joas, Reihard; Dondi, Francesco

2014-11-01

Chemical Leasing is a service-oriented business model that shifts the focus from increasing sales volume of chemicals towards a value-added approach. Recent pilot projects have shown the economic benefits of introducing Chemical Leasing business models in a broad range of sectors. A decade after its introduction, the promotion of Chemical Leasing is still predominantly done by the public sector and international organizations. We show in this paper that awareness-raising activities to disseminate information on this innovative business model mainly focus on the economic benefits. We argue that selling Chemical Leasing business models solely on the grounds of economic and ecological considerations falls short of branding it as a corporate social responsibility initiative, which, for this paper, is defined as a stakeholder-oriented concept that extends beyond the organization's boundaries and is driven by an ethical understanding of the organization's responsibility for the impact of its business activities. For the analysis of Chemical Leasing business models, we introduce two case studies from the water purification and metal degreasing fields, focusing on employees and local communities as two specific stakeholder groups of the company introducing Chemical Leasing. The paper seeks to demonstrate that Chemical Leasing business models can be branded as a corporate social responsibility initiative by outlining the vast potential of Chemical Leasing to improve occupational health and safety and to strengthen the ability of companies to protect the environment from the adverse effects of the chemicals they apply.

From academic research to the creation of Chelatec company

International Nuclear Information System (INIS)

Loussouarn, A.

2002-01-01

Full text: CHELATEC (www.chelatec.fr) was founded in 2000 as a spin-off INSERM at institute U-463, Nantes Hospital, France. The present team has benefited from the abilities and know-how acquired in radioimmunotargeting within the vectorisation group of INSERM. The company provides complete engineering services based on complexation and vectorisation, as adapted to the client's needs in the fields of customised radiolabelling, radioimmunotargeting, decorporation and trapping of metals. CHELATEC conducts R and D activity under contract in key fields of chemical applications to medicine and environment. Our mission is to enable pharmaceutical industries and biotechnolgies companies to successfully exploit our skills and to help them in their product of process development. CHELATEC produces and supplies radiolabelled compounds

Suppression of Astronomical Sources Using Starshades and the McMath-Pierce Solar Telescope

Science.gov (United States)

Novicki, Megan; Warwick, Steve; Smith, Daniel; Richards, Michael; Harness, Anthony

2016-01-01

The external starshade is a method for the direct detection and spectral characterization of terrestrial planets around other stars, a key goal identified in ASTRO2010. Tests of this approach have been and continue to be conducted in the lab and in the field (Samuele et al., 2010, Glassman et al., 2014) using non-collimated light sources with a spherical wavefront. We extend the current approach to performing night-time observations of astronomical objects using small-scale (approximately 1/300th) starshades and the McMath-Pierce Solar Telescope at Kitt Peak National Observatory. We placed a starshade directly in the path of the beam from an astronomical object in front of the main heliostat. Using only flat mirrors, we then directed the light through the observatory path and reflected it off the West heliostat to an external telescope located approximately 270m away, for an effective baseline of 420m.This configuration allowed us to make measurements of flat wavefront sources with a Fresnel number close to those expected in proposed full-scale space configurations. We present the results of our engineering runs conducted in 2015.

Transformation Leadership in Chemical Industry

KAUST Repository

Alsherehy, Fahad A.

2018-01-01

SABIC is a global leader in diversified chemicals headquartered in Riyadh, Saudi Arabia. It manufactures on a global scale in the Americas, Europe, Middle East and Asia Pacific, making distinctly different kinds of products: chemicals, commodity and high performance plastics, agri-nutrients and metals. The company has more than 35,000 employees worldwide and operates in more than 50 countries, with innovation hubs in five key geographies ﾖ USA, Europe, Middle East, South East Asia and North East Asia.

Transformation Leadership in Chemical Industry

KAUST Repository

Alsherehy, Fahad A.

2018-01-16

SABIC is a global leader in diversified chemicals headquartered in Riyadh, Saudi Arabia. It manufactures on a global scale in the Americas, Europe, Middle East and Asia Pacific, making distinctly different kinds of products: chemicals, commodity and high performance plastics, agri-nutrients and metals. The company has more than 35,000 employees worldwide and operates in more than 50 countries, with innovation hubs in five key geographies ﾖ USA, Europe, Middle East, South East Asia and North East Asia.

Evaluation of co-sourcing communications amongst international company and local public relations agencies (case company: company x)

OpenAIRE

Yin, Ying

2009-01-01

The subject of the thesis is the evaluation of co-sourcing communications amongst international company and local public relations agencies, taking the company x as a case. It analyses the environment the co-sourcing PR agencies communicate with international clients, compares with the current communications the case company has, and comes up with practical suggestions for the company to have better cooperation with local agencies to achieve mutual benefits. The theoretical part consi...

Levels of Some Heavy Metals and Physico Chemical Properties of ...

African Journals Online (AJOL)

In this study, the concentrations of selected heavy meyals and physico-chemical characteristics of effluents from a beverage company in Rivers State, Nigeria and those of the receiving Woji River were evaluated to ascertain the efficiency of the company's waste treatment processes. The results showed that the contents of ...

Belly button piercings: a saving grace? A patent urachus presenting in a 17-year-old girl.

Science.gov (United States)

Bannon, Aidan; Black, Patrick; Turner, Joanna; Gray, Sam; Kirk, Stephen

2014-06-10

We report the case of a 17-year-old girl who presented to the accident and emergency department with dysuria and foul smelling, bloody discharge from her umbilicus. The definitive diagnosis was that of a patent urachus, which is a fistulous communication between the bladder and the umbilicus, usually diagnosed in early infancy. The incidence of a patent urachus is approximately 1 in 70,000 in the general population. It is highly likely that removal of a recent belly button piercing resulted in the acute presentation by completing the fistulous tract to the skin. This case is of clinical relevance as the diagnosis was missed 18 months prior with a milder presentation. The recommended treatment option is surgical excision due to the potential risk of malignant change, with urachal adenocarcinoma accounting for 0.3% of all bladder cancers. 2014 BMJ Publishing Group Ltd.

Leading Players of the Global Petrochemical Industry. Overview of Groups - SWOTs - Benchmarking - Company Profiles and Financials

International Nuclear Information System (INIS)

2017-02-01

This study presents: The medium-term and mega trends of the industry market developments and geographical segments; The competitive landscape and the main corporate rankings; The main conclusions of the report, summarised in 10 analytical slides. Content: 1. Overview: The Sector, Ranking, Performance Analysis; 2. Company Profiles: ExxonMobil, Total, BASF, Dow Chemical, Reliance Industries, Sabic, LyondellBasell, Mitsubishi Chemical, LG Chem, Sumitomo Chemical; 3. Sources; 4. Annexes

The Danish Industrial Enzyme Industry - National based Companies with strong internationalised R&D

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Hansen, Anne Grethe

Danish industrial enzyme industry consists of three main companies (Chr. Hansen A/S, Novozymes A/S and Danisco A/S) which in total has around 75 percent of the world market for industrial enzymes. Industrial enzymes are catalysts used in biological and chemical processes in food, detergents, paper...... and energy and many other fields. Historically the industry started up in 1874 based on empiric knowledge on use of rennet in production of cheese from Switzerland and Germany and later enriched by scientific knowledge produced in the company and institutions all over the world. Important for the company...... was resources of calve stomachs from which the active stuff can be extracted. The private university, The Carlsberg Laboratory, established nearly at the same time, became after First World War a world leader in research of enzymes. And inspiration from here to the pharmaceutical company in insulin production...

REACH: next step to a sound chemicals management.

Science.gov (United States)

Van der Wielen, Arnold

2007-12-01

REACH is the new European Regulation for Registration, Evaluation, Authorisation and Restriction of Chemicals. It entered into force on 1st June 2007 to streamline and improve the former legislative framework on new and on existing chemical substances of the European Union. Companies which manufacture or import more than 1 tonne of a substance per year will be required to register the substance at the new EU Chemicals Agency located in Helsinki. REACH places greater responsibility on industry to manage the risks that chemicals may pose to the health and the environment and to provide safety information that will be passed down the supply chain. In principle, REACH applies to all chemicals as such, as components in preparations and as used in articles. REACH is a radical step forward in the EU chemicals management. The onus will move from the authorities to industry. In addition, REACH will allow the further evaluation of substances where there are grounds for concern, foresees an authorisation system for the use of substances of very high concern and a system of restrictions, where applicable, for substances of concern. The Authorisation system will require companies to switch progressively to safer alternatives where a suitable alternative exists. Current use restrictions will remain under REACH system.

Food safety management systems performance in African food processing companies: a review of deficiencies and possible improvement strategies.

Science.gov (United States)

Kussaga, Jamal B; Jacxsens, Liesbeth; Tiisekwa, Bendantunguka Pm; Luning, Pieternel A

2014-08-01

This study seeks to provide insight into current deficiencies in food safety management systems (FSMS) in African food-processing companies and to identify possible strategies for improvement so as to contribute to African countries' efforts to provide safe food to both local and international markets. This study found that most African food products had high microbiological and chemical contamination levels exceeding the set (legal) limits. Relative to industrialized countries, the study identified various deficiencies at government, sector/branch, retail and company levels which affect performance of FSMS in Africa. For instance, very few companies (except exporting and large companies) have implemented HACCP and ISO 22000:2005. Various measures were proposed to be taken at government (e.g. construction of risk-based legislative frameworks, strengthening of food safety authorities, recommend use of ISO 22000:2005, and consumers' food safety training), branch/sector (e.g. sector-specific guidelines and third-party certification), retail (develop stringent certification standards and impose product specifications) and company levels (improving hygiene, strict raw material control, production process efficacy, and enhancing monitoring systems, assurance activities and supportive administrative structures). By working on those four levels, FSMS of African food-processing companies could be better designed and tailored towards their production processes and specific needs to ensure food safety. © 2014 Society of Chemical Industry.

A sequential-move game for enhancing safety and security cooperation within chemical clusters

International Nuclear Information System (INIS)

Pavlova, Yulia; Reniers, Genserik

2011-01-01

The present paper provides a game theoretic analysis of strategic cooperation on safety and security among chemical companies within a chemical industrial cluster. We suggest a two-stage sequential move game between adjacent chemical plants and the so-called Multi-Plant Council (MPC). The MPC is considered in the game as a leader player who makes the first move, and the individual chemical companies are the followers. The MPC's objective is to achieve full cooperation among players through establishing a subsidy system at minimum expense. The rest of the players rationally react to the subsidies proposed by the MPC and play Nash equilibrium. We show that such a case of conflict between safety and security, and social cooperation, belongs to the 'coordination with assurance' class of games, and we explore the role of cluster governance (fulfilled by the MPC) in achieving a full cooperative outcome in domino effects prevention negotiations. The paper proposes an algorithm that can be used by the MPC to develop the subsidy system. Furthermore, a stepwise plan to improve cross-company safety and security management in a chemical industrial cluster is suggested and an illustrative example is provided.

Comparison of Poly Aluminum Chloride and Chlorinated Cuprous for Chemical Oxygen Demand and Color Removal from Kashan Textile Industries Company Wastewater

Directory of Open Access Journals (Sweden)

Hoseindoost Gh.1 MSPH,

2016-08-01

Full Text Available Aims Textile wastewaters are the most important health and environmental problems in Kashan. This research was aimed to compare the poly aluminum chloride and chlorinated cuprous efficiency for removal of Chemical Oxygen Demand (COD and color from Kashan Textile Industries Company wastewater. Materials & Methods This experimental bench scale study in a batch system was conducted on 20 composed wastewater samples collected from Kashan Textile Industries Company raw wastewater. During 5 months, in the beginning of every week a day was selected randomly and in the day a composed sample was taken and studied. PAC at the doses of 10, 20, 30, 40 and 50mg.l-1 and chlorinated cuprous at the doses of 100, 200, 300, 400 and 500mg.l-1 were applied. The optimum pH also optimum concentration of PAC and chlorinated cuprous were determined using Jar test. The data was analyzed by SPSS 16 using descriptive statistics and Fisher Exact test. Findings The average concentration of COD in the raw textile wastewater was 2801.56±1398.29mg.l-1. The average COD concentration has been decreased to 1125.47±797.55mg.l-1. There was a significant difference between the effects of these two coagulants efficiency (p<0.05. The average COD removal efficiency for chlorinated cuprous and PAC was 58.52% and 72.56%, respectively. Also, the average color removal efficiency by chlorinated cuprous and PAC were 17.23 and 64.45%, respectively. Conclusion PAC is more efficient than chlorinated cuprous for both COD and color removal from KTIC wastewater.

17 CFR 270.3a-3 - Certain investment companies owned by companies which are not investment companies.

Science.gov (United States)

2010-04-01

... the definition of the term “investment company” by section 3(b)(1) or 3(b)(2) of the Act (15 U.S.C... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Certain investment companies owned by companies which are not investment companies. 270.3a-3 Section 270.3a-3 Commodity and...

Land-use planning risk estimates for a chemical industrial park in China - A longitudinal study

DEFF Research Database (Denmark)

Hu, Xinsheng; Wu, Zongzhi; Hedlund, Frank Huess

2018-01-01

A chemical industrial park (CIP) can centralize the management of companies and facilitate mutual communication between different businesses. Due to these advantages, an increasing number of chemical companies are forced into CIP, especially in developing countries such as China. Thus, the land......-site risk levels are still low and within the acceptable region, the study concludes that the authorities should review carefully and monitor the risk level in case of future development activities around and within the chemical industrial park, e.g. preserving a buffer zone should be considered. For future...

Chemical Spill Prevention, Control, and Countermeasures Plan: 100 Areas

Energy Technology Data Exchange (ETDEWEB)

Chien, Y.M.

1989-06-01

The purpose of this Chemical Spill Prevention, Control, and Countermeasures (SPCC) Plan is to identify the chemical spill control practices, procedures, and containment devices Westinghouse Hanford Company (Westinghouse Hanford) employs to prevent a reportable quantity (RQ) of a hazardous substance (as defined in 40 CFR Part 302) from being released to the environment. The chemical systems and chemical storage facilities in the 100 Areas are described. This document traces the ultimate fate of accidental chemical spills at the 100 Areas. Also included in the document destinations, spill containment devices, and systems surveillance frequencies. 2 tabs.

Chemical Spill Prevention, Control, and Countermeasures Plan: 100 Areas

International Nuclear Information System (INIS)

Chien, Y.M.

1989-06-01

The purpose of this Chemical Spill Prevention, Control, and Countermeasures (SPCC) Plan is to identify the chemical spill control practices, procedures, and containment devices Westinghouse Hanford Company (Westinghouse Hanford) employs to prevent a reportable quantity (RQ) of a hazardous substance (as defined in 40 CFR Part 302) from being released to the environment. The chemical systems and chemical storage facilities in the 100 Areas are described. This document traces the ultimate fate of accidental chemical spills at the 100 Areas. Also included in the document destinations, spill containment devices, and systems surveillance frequencies. 2 tabs

Smart Companies.

Science.gov (United States)

Galagan, Patricia A.

1997-01-01

Capturing and leveraging knowledge is an important new management trend that is as yet undefined. Some companies are accounting for their intellectual capital and applying it to the company balance sheets. (JOW)

78 FR 62364 - Sunshine Act Meeting

Science.gov (United States)

2013-10-21

... names of two offshore companies he controlled (the ``Corporate Accounts''). The law judge ordered Pierce... provisions of the Government in the Sunshine Act, Public Law 94-409, that the Securities and Exchange... initial decision of an administrative law judge. The law judge found that China-Biotics, Inc., an issuer...

Sealing of transmitted-heat lines at wall piercings; Abdichtung von Fernwaermeleitungen in Mauerdurchfuehrungen

Energy Technology Data Exchange (ETDEWEB)

Werner, A.; Ney, K. [Doyma GmbH und Co., Oyten (Germany)

1998-04-01

Flexible sealing systems are necessary to provide permanent protection of transmitted-heat pipe wall penetrations against the ingress of water. Unlike the rigid sealing methods in widespread use, flexible sealing systems are capable of absorbing thermally induced pipe movements and thus of preventing leaks around such piercings. The following article provides an introduction to the subject and offers practical suggestions for the ideal design of transmitted-heat pipe wall penetrations. Sealing system variants with a range of degrees of flexibility are discussed, in addition to measures which need to be taken into account as early as the installation of the pipe itself. Prime attention is devoted not to methods already practised, but to recent, potentially marketable developments. (orig.) [Deutsch] Um Mauerdurchfuehrungen von Fernwaermeleitungen dauerhaft gegen das Eindringen von Wasser zu schuetzen, sind flexible Abdichtsysteme notwendig. Im Gegensatz zu den verbreiteten starren Abdichtungsmethoden koennen flexible Systeme die thermisch bedingten Rohrbewegungen aufnehmen und damit Undichtigkeiten im Bereich der Durchfuehrungen verhindern. Der folgende Beitrag fuehrt in die Thematik ein und gibt praktische Hinweise, wie eine Mauerdurchfuehrung von Fernwaermeleitungen idealerweise gestaltet werden sollte. Neben Massnahmen, die bereits bei der Rohrverlegung zu beachten sind, werden Abdichtvarianten mit unterschiedlichem Flexibilitaetsgrad skizziert. Schwerpunkt der Untersuchung liegt hier nicht nur auf bereits bekannten Verfahren sondern auch auf marktfaehigen Neuentwicklungen. (orig.)

MERGER ACCOUTING FOR COMPANIES

OpenAIRE

SUCIU GHEORGHE

2014-01-01

Companies, especially nowadays, are characterized through great mobility, fast circulation of capital, occurring in their chase for profit. In this context, companies look for alliances, economical and political assistance. These objectives can materialize through merging of companies. The merger can be internal (between Romanian companies) or transboundary, which includes foreign companies. In order to correctly reflect these events, the merger operations must be regulated and mu...

A sequential-move game for enhancing safety and security cooperation within chemical clusters.

Science.gov (United States)

Pavlova, Yulia; Reniers, Genserik

2011-02-15

The present paper provides a game theoretic analysis of strategic cooperation on safety and security among chemical companies within a chemical industrial cluster. We suggest a two-stage sequential move game between adjacent chemical plants and the so-called Multi-Plant Council (MPC). The MPC is considered in the game as a leader player who makes the first move, and the individual chemical companies are the followers. The MPC's objective is to achieve full cooperation among players through establishing a subsidy system at minimum expense. The rest of the players rationally react to the subsidies proposed by the MPC and play Nash equilibrium. We show that such a case of conflict between safety and security, and social cooperation, belongs to the 'coordination with assurance' class of games, and we explore the role of cluster governance (fulfilled by the MPC) in achieving a full cooperative outcome in domino effects prevention negotiations. The paper proposes an algorithm that can be used by the MPC to develop the subsidy system. Furthermore, a stepwise plan to improve cross-company safety and security management in a chemical industrial cluster is suggested and an illustrative example is provided. Copyright © 2010 Elsevier B.V. All rights reserved.

The Surveys to the Companies: A Tool for the Improvement of Degrees

Science.gov (United States)

Cruells Cadevall, Montserrat; Roca Vallmajor, Antoni; Escaja Sánchez, Núria; Fernández González, Javier; Garrido Ponce, José Antonio; Giménez Farreras, Jaume; Llauradó Tarragó, Montserrat; Rodriguez Raurell, Laura; Marcos, Josep Oriol Bernad; Arias, Carla Escobar; Vinent, Nuria López; Gratovil, Ma Lluisa Sagristà; Aragay, Carme Navarro

2017-01-01

In scientific and technical degrees, the opinion of the final employers on the given subjects is really important. For this reason, the Quality Committee (CQ) of the Faculty of Chemistry of the University of Barcelona prepared a survey for chemical, engineering and pharmaceutical companies asking about the academic training required by the…

Is the HP-UHP Hong'an-Dabie-Sulu orogen a piercing point for offset on the Tan-Lu fault?

Science.gov (United States)

Leech, Mary L.; Webb, Laura E.

2013-02-01

The Tan-Lu fault is a major strike-slip fault in eastern China that appears to offset the high-grade rocks of the Hong'an-Dabie-Sulu orogen left-laterally ˜540 km. We evaluate models for the collision between the South and North China blocks, published radiometric dates recording HP-UHP metamorphism and exhumation in the Hong'an-Dabie and Sulu terranes, and the timing of sinistral motion on the Tan-Lu fault to evaluate whether UHP rocks provide a piercing point for offset on the Tan-Lu fault. UHP metamorphism in Hong'an-Dabie was concurrent with Sulu based on U-Pb dating of coesite-bearing domains of zircon at 244 ± 5-226 ± 2 Ma for Hong'an-Dabie and 243 ± 4-225 ± 2 Ma for Sulu. Retrograde metamorphism began c. 220 Ma for both Hong'an-Dabie and Sulu, but retrograde zircon growth ended c. 214 Ma in Hong'an-Dabie and continued until c. 202 Ma in Sulu based on U-Pb dating of zircon domains external to coesite-bearing domains. Structures in Sulu are rotated 25° counter-clockwise from, but are broadly similar to, Hong'an-Dabie suggesting the two areas have a common Triassic orogenic history that pre-dates motion on the Tan-Lu fault, and that is consistent with paleomagnetic studies. We constructed a pre-Cretaceous restoration of the Hong'an-Dabie-Sulu belt that moves the Sulu terrane south, aligning the suture and the eclogite-facies isograd, and rotates Sulu c. 25° clockwise to re-align structures with Hong'an-Dabie. Our restoration is supported by published data and shows that the Hong'an-Dabie-Sulu orogen is a piercing point for post-collisional offset on the Tan-Lu fault and that these regions shared a common subduction-exhumation history. The Tan-Lu fault did not play a significant role in the Hong'an-Dabie-Sulu collision and likely developed later, in the Early Cretaceous.

Corporate Sustainability: A Case Study in the Company Artecola

Directory of Open Access Journals (Sweden)

Cristiane Froehlich

2016-12-01

Full Text Available This study aims to verify the sustainability practices that address the triple bottom line at Artecola. The company headquarters is located in Rio Grande do Sul and it has units in several states in Brazil, Latin America and China. The company operates in three sectors: chemical, leather-footwear and engineering plastics. This research is classified as bibliographic, descriptive and qualitative case study. Data were collected based on 10 semi-structured interviews and internal documents, which were analyzed using qualitative content analysis. The main results show that sustainability practices include the triple bottom line at Artecola. However, the concept of sustainability is not understood in a systemic way by organization. Thus, the three pillars of the triple bottom line (economic, environmental and social are not necessarily included in an interdependent way in the current corporate sustainability actions.

Body piercing and tattoo: awareness of health related risks among 4,277 Italian secondary school adolescents

Science.gov (United States)

2010-01-01

Background The awareness of health risks associated with body art among secondary school pupils has never previously been studied in depth. A large sample of secondary school adolescents from the Veneto Region (North East Italy) were investigated in order to inform health education programs. Methods 6 public secondary schools from each of the 7 Provinces of the Veneto Region were selected. All students attending the 1st, 3rd, and 5th school years were surveyed by an anonymous self administered questionnaire on their perception of health risks related to body art and other explanatory variables. Logistic regression analysis was employed, reporting adjusted Odds Ratios (OR) with 95% Confidence Interval (CI). Results Among 4,277 available students (aged 14-22 years), boys were consistently: less knowledgeable of infectious diseases related to body art (OR = 0.78; CI: 0.66, 0.94), less likely to be aware of the hygienic norms to be observed in a body art parlour (OR = 0.54; 0.44, 0.65), less likely to refer to a certified body art parlour (OR = 0.56; 0.48, 0.66), less likely to refer to a professional health care provider for complications related to body art (OR = 0.71; 0.59, 0.86). Students attending the first school year (baseline) had a lesser knowledge of body art related infectious diseases, were less likely to refer to a certified body art parlour, and to know the mandatory hygienic rules to be observed when performing body modifications. Interviewees from the provinces of Rovigo and Vicenza were less likely to be conscious of the health risks associated with body modifications, and those with tattoos were less knowledgeable about the infection risk (OR = 0.60; 0.42, 0.86) and less likely to refer to a professional health care provider in case of medical complication (OR = 0.68;0.48, 0.95). Students with piercings were less likely to refer to a certified practitioner for receiving body art (OR = 0.62; 0.50, 0.77) or therapy for medical complications (OR = 0

Body piercing and tattoo: awareness of health related risks among 4,277 Italian secondary school adolescents

Directory of Open Access Journals (Sweden)

Mazzoleni Francesco

2010-02-01

Full Text Available Abstract Background The awareness of health risks associated with body art among secondary school pupils has never previously been studied in depth. A large sample of secondary school adolescents from the Veneto Region (North East Italy were investigated in order to inform health education programs. Methods 6 public secondary schools from each of the 7 Provinces of the Veneto Region were selected. All students attending the 1st, 3rd, and 5th school years were surveyed by an anonymous self administered questionnaire on their perception of health risks related to body art and other explanatory variables. Logistic regression analysis was employed, reporting adjusted Odds Ratios (OR with 95% Confidence Interval (CI. Results Among 4,277 available students (aged 14-22 years, boys were consistently: less knowledgeable of infectious diseases related to body art (OR = 0.78; CI: 0.66, 0.94, less likely to be aware of the hygienic norms to be observed in a body art parlour (OR = 0.54; 0.44, 0.65, less likely to refer to a certified body art parlour (OR = 0.56; 0.48, 0.66, less likely to refer to a professional health care provider for complications related to body art (OR = 0.71; 0.59, 0.86. Students attending the first school year (baseline had a lesser knowledge of body art related infectious diseases, were less likely to refer to a certified body art parlour, and to know the mandatory hygienic rules to be observed when performing body modifications. Interviewees from the provinces of Rovigo and Vicenza were less likely to be conscious of the health risks associated with body modifications, and those with tattoos were less knowledgeable about the infection risk (OR = 0.60; 0.42, 0.86 and less likely to refer to a professional health care provider in case of medical complication (OR = 0.68;0.48, 0.95. Students with piercings were less likely to refer to a certified practitioner for receiving body art (OR = 0.62; 0.50, 0.77 or therapy for medical

Evaluating work and training within an intercommunicating process of change: reflections drawn from a case study on a chemicals industrial company in Portugal.

Science.gov (United States)

Vasconcelos, Ricardo; Silva, Daniel; Pinto, Ricardo; Duarte, Sérgio

2012-01-01

The new challenges in the field of Health and Safety at Work require the implementation of more comprehensive and participatory interventions, in order to have a real impact on the working conditions. Matriosca Model has sought over the years to involve workers in the construction of new working conditions, promoting transformation through training and recreating training from the transformation. This article seeks to present some of the results of the implementation of the Matriosca Model on a chemicals industrial company regarding the many changes that it promoted, how these changes have evolved through time, how the dimensions of training and transformation interact and what the participants' perception of the intervention was. The conclusions drawn allow a richer evaluation of the process, which can enhance the intercommunicating nature between training and transformation, and what impact this has on the actual work.

Open Source Telecommunication Companies

Directory of Open Access Journals (Sweden)

Peter Liu

2007-08-01

Full Text Available Little is known about companies whose core business is selling telecommunications products that lever open source projects. Open source telecommunications (OST companies operate in markets that are very different from typical software product markets. The telecommunications market is regulated, vertically integrated, and proprietary designs and special chips are widely used. For a telecommunications product to be useful, it must interact with both access network products and core network products. Due to specifications in Service Agreements Levels, penalties for failures of telecommunications products are very high. This article shares information that is not widely known, including a list of OST companies and the open source projects on which they depend, the size and diversity of venture capital investment in OST companies, the nature of the commercial product-open source software and company-project relationships, ways in which OST companies make money, benefits and risks of OST companies, and competition between OST companies. Analysis of this information provides insights into the ways in which companies can build business models around open source software. These findings will be of interest to entrepreneurs, top management teams of incumbent companies that sell telecommunications products, and those who care about Ontario's ability to compete globally.

Study Of The Physico-Chemical Water Quality Of The Companys Pumping Stations Chadian Water And Suburbs Of Manual Drilling Ndjamena

Directory of Open Access Journals (Sweden)

Mahamat Seid A.M

2015-08-01

Full Text Available Water for consumption requires excellent physical chemical and microbiological quality. This source of life is one of the most controlled food products. It must not only meet the quality requirements but also must comply vis- -vis a set of drinking water standards and must not contain any microorganism no noise and no substance presents a potential danger to human health. This work was performed in the city of Ndjamena and aims to assess the physico-chemical quality of the water pumping stations of the National Water Company in the city center and boreholes in human motor in neighborhoods peripheral devices. A total of 18 samples were collected including 9 in the city center and 9 others in the suburbs. On each sample were determined physico-chemical parameters potential of hydrogen pH temperature T electrical conductivity turbidity and calcium ions magnesium sulphates fluorides and nitrates. The results extend into the water pumping stations of ETS and manual drilling outlying districts respectively temperature 28.0 to 36.1 C and 29.5 to 30.3 C pH 6.5 to 8.5 and 6.3 to 7.6 electrical conductivity 201-671 amp297S cm and 136-533 amp297S cm turbidity NTU from 0.01 to 0.18 and 1.25 to 5 NTU calcium 54 to 268 mg L to 65-443 mg L magnesium 2.18 to 57 mg L and 15 to 90 mg L sulfates 2 to 47 mg L and 2 to 18mg L fluoride 0.0 to 0.61 mg L and 0.12 to 0.98 mg L and nitrate 1.5 to 18 2 mg L and 0.1 to 0.6 mg L. The results show that the contents of the parameters are consistent with the WHO standards for the quality of drinking water except calcium ions which their levels are high. Based on the parameters analyzed the quality of water pumping stations of SNE and manual drilling is acceptable.

The business case for transitioning to safer chemicals.

Science.gov (United States)

McFadden, Roger D

2011-01-01

Emerging domestic and international chemical regulations and a heightened consumer awareness of chemicals of concern in products is challenging American businesses to reevaluate and reconsider their approaches to supply chain management and product design. Some of these companies recognize business opportunities and are responding proactively with innovative strategies and tactics. This article describes steps that Staples Inc., the world's largest office products provider, is taking to meet demand for products that are safer and more sustainable. In trying to meet the demand for safer products, Staples faces significant barriers, including the complexity of supply chains, data gaps, and confidential business information. New collaborations between companies, government, and advocates, and improved tools and criteria for defining safer products enhance the ability of businesses, like Staples, to meet new consumer demands.

Physician-owned companies.

Science.gov (United States)

Kostuik, John P

2007-05-15

The author relates his experience in the development of a spinal implant development company (K2M) that is significantly advised by physicians. To provide information about the development of a spinal implant company (K2M) advised by a group of professional spinal surgeons. To relate the federal laws (STARK and anti-kickback) as they pertain to surgeon-influenced companies. To discuss the role of a scientific advisory board. A self-developed company was developed together with significant, but minority physician financial input and majority scientific advice. A privately owned spinal implant development corporation (K2M) was developed 3 years ago. Physician financial participation was less than 20% (Stark laws state no more than 40%). Users of product are greater than 60% non-investor physicians. The development of a large scientific advisory board has been very influential in product development. A privately owned spinal implant company (K2M) has been developed strictly within Federal laws. Its board of scientific advisors that receives recompense commissurate only with effort significantly impacts the company policy.

Chemicals manufacture via biotechnology - the prospects for western Europe

Energy Technology Data Exchange (ETDEWEB)

Lewis, C.; Kristiansen, B.

1985-09-02

The trend of European chemical and biotechnological companies to move away from low value, high volume bulk chemicals towards the manufacture of high value, low volume, fine and speciality chemicals will continue into the 21st century. The manufacture of fine chemicals (principally antibiotics, biopesticides, enzymes and organic acids) and commodity chemicals (principally butanol and industrial ethanol) necessitates 1.5Mt and 2-3 Mt of carbohydrate feedstocks for their production. Thus it is vital that the Common Agricultural Policy does not interfere with the progress of the biotechnology industry by maintaining carbohydrate feedstock prices at their present high levels.

Risk assessment of chemicals in foundries: The International Chemical Toolkit pilot-project

International Nuclear Information System (INIS)

Ribeiro, Marcela G.; Filho, Walter R.P.

2006-01-01

In Brazil, problems regarding protection from hazardous substances in small-sized enterprises are similar to those observed in many other countries. Looking for a simple tool to assess and control such exposures, FUNDACENTRO has started in 2005 a pilot-project to implement the International Chemical Control Toolkit. During the series of visits to foundries, it was observed that although many changes have occurred in foundry technology, occupational exposures to silica dust and metal fumes continue to occur, due to a lack of perception of occupational exposure in the work environment. After introducing the Chemical Toolkit concept to the foundry work group, it was possible to show that the activities undertaken to improve the management of chemicals, according to its concept, will support companies in fulfilling government legislations related to chemical management, occupational health and safety, and environmental impact. In the following meetings, the foundry work group and FUNDACENTRO research team will identify 'inadequate work situations'. Based on the Chemical Toolkit, improvement measures will be proposed. Afterwards, a survey will verify the efficency of those measures in the control of hazards and consequently on the management of chemicals. This step is now in course

VULNERABILITY OF COMPANIES

Directory of Open Access Journals (Sweden)

ARMEAN ANDREEA

2013-06-01

Full Text Available In present, the study of vulnerability of companies is increasing in every field due to the unstable economic environment influences. The object of this research is to define and identify vulnerabilities of companies and the establishment of evaluation methods at their level. This article emphasizes the importance and usefulness of one of the best known model in this way, from our point of view, namely Băileşteanu, Negrila Pattern. This pattern covers both external factors and internal ones, that increase vulnerabilities of companies, and fit the companies in which the state of vulnerability are (vitality, viability, vulnerability, high vulnerability, difficulty and high difficulty, with a matrix. The result of the research is that any company belonging to any field, can be analyzed using this model, and assigned to one of the conditions defined within.

The Danish East India Company

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

2005-01-01

The article analysis the first Danish East India Company incorporated in 1616, which was the first Danish Stock Company and which has impacts even on modern Danish company la......The article analysis the first Danish East India Company incorporated in 1616, which was the first Danish Stock Company and which has impacts even on modern Danish company la...

Atomic Energy of Canada Limited-Chemical Company Annual review of operations, 1980-81

International Nuclear Information System (INIS)

1981-01-01

Record production of heavy water was achieved: the plants at Glace Bay and Port Hawkesbury, Nova Scotia, produced a total of 560 megagrams. A shipment of 500 Mg was delivered on time to the Wolsung CANDU reactor in Korea. Energy conservation and waste heat utilization programs included the construction of a greenhouse at the Glace Bay site. Long-term protection of the La Prade site is essentially complete. The company has reorganized its marketing and engineering division and assumed a greater international role

Company Portfolios Answer the Question: What Do You Know about My Company?

Science.gov (United States)

Watson, Michelle L.

2001-01-01

Job seekers can demonstrate their knowledge of a potential employer by developing a company portfolio. Elements include company history, mission, values, and goals; size and location(s); financial status; and recent changes in the company and industry. (SK)

75 FR 29754 - Claims of Confidentiality of Certain Chemical Identities Contained in Health and Safety Studies...

Science.gov (United States)

2010-05-27

... chemical substances, EPA is aware that some companies believe their competitors are sufficiently knowledgeable that if EPA were to disclose the chemical identity, the competitors would be capable of... a chemical identity of a chemical substance inspires a competitor to ascertain a process for...

Política do corpo e política de vida: a tatuagem e o body piercing como expressão corporal de uma ética da dissidência Politics of the body, politics of life: tattoos and body piercing as a corporal expression of an ethics of dissidence

Directory of Open Access Journals (Sweden)

Vitor Sérgio Ferreira

2007-11-01

Full Text Available A estética da divergência, que caracteriza a corporeidade extensivamente marcada com recurso à tatuagem e ao body piercing, configura uma forma de demarcação estilística através da qual alguns jovens constroem e dão a (reconhecer não só a sua identidade pessoal, mas também o modo como percebem e se relacionam com o mundo. Implica uma performance estética que excorpora uma homóloga atitude ética, consubstanciando um sentido de desafiliação perante a ordem cultural e social estabelecida. Trata-se de uma ética de dissidência que reclama uma remoralização da vida quotidiana no sentido de conquistar um espaço social de existência no mundo, onde seja possível viver o compromisso com um corpo, uma identidade e um estilo de vida que se pretende «alternativo» aos disponibilizados pelo actual «supermercado de estilos», em condições de autenticidade, respeito e liberdade individual.The aesthetic of divergence that characterises extensively tattooed and body pierced bodies, represents a way of stylistic demarcation through which some young people build and reveal not only their personal identity, but also the way they perceive and relate to the world. It implies an aesthetic performance that embodies a homologous ethical attitude, consubstantiated in a sense of disaffiliation towards the established social and cultural order. It is an ethic of dissidence that reclaims a remoralisation of day-to-day life, so as to conquer a social space of existence in the world, where it is possible to live a commitment with a body, an identity, and a life style that aims to be "alternative" to the current "supermarket of styles" on offer, under conditions of authenticity, respect and personal freedom.

Employee motivation and work performance: A comparative study of mining companies in Ghana

Energy Technology Data Exchange (ETDEWEB)

Kuranchie-Mensah, E.; Amponsah-Tawiah, K.

2016-07-01

The paper empirically compares employee motivation and its impact on performance in Ghanaian Mining Companies, where in measuring performance, the job satisfaction model is used. The study employed exploratory research design in gathering data from four large-scale Gold mining companies in Ghana with regards to their policies and structures in the effectiveness of motivational tools and strategies used by these companies. The study observed that, due to the risk factors associated with the mining industry, management has to ensure that employees are well motivated to curb the rate at which employees embark on industrial unrest which affect performance, and employees are to comply with health and safety rules because the industry contribute hugely to the Gross Domestic Product (GDP) of the country. Limitation to the present study include the researcher’s inability to contact other mining companies. However, the study suggests possibilities for future research including contacting other mining companies, expanding the sample size, managers ensuring that the safety and health needs of staff are addressed particularly those exposed to toxic and harmful chemicals. A lot of studies have been done on mining companies in the past. This paper fills a gap perceived that employees in this sector are highly motivated in spite of the challenges being faced by them, and knowing more about what keeps employees moving is still of national interest. (Author)

Employee motivation and work performance: A comparative study of mining companies in Ghana

International Nuclear Information System (INIS)

Kuranchie-Mensah, E.; Amponsah-Tawiah, K.

2016-01-01

The paper empirically compares employee motivation and its impact on performance in Ghanaian Mining Companies, where in measuring performance, the job satisfaction model is used. The study employed exploratory research design in gathering data from four large-scale Gold mining companies in Ghana with regards to their policies and structures in the effectiveness of motivational tools and strategies used by these companies. The study observed that, due to the risk factors associated with the mining industry, management has to ensure that employees are well motivated to curb the rate at which employees embark on industrial unrest which affect performance, and employees are to comply with health and safety rules because the industry contribute hugely to the Gross Domestic Product (GDP) of the country. Limitation to the present study include the researcher’s inability to contact other mining companies. However, the study suggests possibilities for future research including contacting other mining companies, expanding the sample size, managers ensuring that the safety and health needs of staff are addressed particularly those exposed to toxic and harmful chemicals. A lot of studies have been done on mining companies in the past. This paper fills a gap perceived that employees in this sector are highly motivated in spite of the challenges being faced by them, and knowing more about what keeps employees moving is still of national interest. (Author)

CRM strategy in the case of Colombian companies of bio-products

International Nuclear Information System (INIS)

Rojas Lopez, Miguel David; Vera, Madalyd; Arias, Maria Isabel

2012-01-01

The agricultural sector in Colombia and in the world presents growth rates, indicating potential customers for the use of inputs in production. The use of these products is increasingly constrained by environmental factors and health factors; thus, the market for bio-products for agricultural uses growth considerably, but far from achieving the sales of agro-chemical products. In Colombia, there are medium and small companies engaged in the development and production of technologies that compete with large corporations, for a market accustomed to use chemical products from traditional brands. The implementation of solid strategies for managing the customer relationships (CRM) will be an alternative to increase market share.

Regulating Listed Companies: Between Company Law and Financial Market Law in Danish Law

DEFF Research Database (Denmark)

Clausen, Nis Jul

2011-01-01

The article discusses different elements and aspects of the regulation of listed companies in particular whether such regulation should be placed in company law or in financial marked law.......The article discusses different elements and aspects of the regulation of listed companies in particular whether such regulation should be placed in company law or in financial marked law....

77 FR 20882 - Manning Grain Company; Acquisition and Operation Exemption; Fillmore Western Railway Company

Science.gov (United States)

2012-04-06

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35612] Manning Grain Company; Acquisition and Operation Exemption; Fillmore Western Railway Company Manning Grain Company (MGC... Docket No. FD 35607, Manning Rail, Inc.--Acquisition and Operation Exemption--Manning Grain Company...

Recycling and surplus chemical programs

International Nuclear Information System (INIS)

Harper, T.J.

1993-05-01

In 1988, 45 years of defense production came to a close at the US Department of Energy (DOE) Hanford Site. The mission of the Hanford Site was formally changed to environmental restoration and remediation. Westinghouse Hanford Company (WHC) is the management and operations (M ampersand O) contractor leading the cleanup. Within the framework of future Site cleanup, Hanford recycling and surplus chemical programs are making a viable contribution today to waste minimization, diversion of materials from the waste stream, and setting a standard for future operations. This paper focuses on two successful efforts: paper recycling and surplus chemical sales

Fatigue Life Prediction of Self-Piercing Rivet Joints Between Magnesium and Aluminum Alloys

Directory of Open Access Journals (Sweden)

Kang Hong-Tae

2018-01-01

Full Text Available Various light materials including aluminum alloys and magnesium alloys are being used to reduce the weight of vehicle structures. Joining of dissimilar materials is always a challenging task to construct a solid structure. Self-piercing rivet (SPR joint is one of various joining methods for dissimilar materials. Front shock tower structures were constructed with magnesium alloy (AM60 joined to aluminum alloy (Al6082 by SPR joints. To evaluate the durability performance of the SPR joints in the structures, fatigue tests of the front shock tower structures were conducted with constant amplitude loadings. Furthermore, this study investigated fatigue life prediction method of SPR joints and compared the fatigue life prediction results with that of experimental results. For fatigue life prediction of the SPR joints in the front shock tower structures, lap-shear and cross-tension specimens of SPR joint were constructed and tested to characterize the fatigue properties of the SPR joint. Then, the SPR joint was represented with area contact method (ACM in finite element (FE models. The load-life curves of the lap-shear and cross-tension specimens were converted to a structural stress-life (S-N curve of the SPR joints. The S-N curve was used to predict fatigue life of SPR joints in the front shock tower structures. The test results and the prediction results were well correlated.

MERGER ACCOUTING FOR COMPANIES

Directory of Open Access Journals (Sweden)

SUCIU GHEORGHE

2014-05-01

Full Text Available Companies, especially nowadays, are characterized through great mobility, fast circulation of capital, occurring in their chase for profit. In this context, companies look for alliances, economical and political assistance. These objectives can materialize through merging of companies. The merger can be internal (between Romanian companies or transboundary, which includes foreign companies. In order to correctly reflect these events, the merger operations must be regulated and must respect national and international regulations. One important request concerning the merger operations is that the accounting values of the assets, debts and ownership equity must be brought to the present financial value.

Countries and companies

International Nuclear Information System (INIS)

Jenning, J.S.

1990-01-01

The trends and factors currently emerging are likely to have significant influence on the way the upstream oil and gas industry evolves in the coming decade. This paper discusses how these trends might influence events in the 1990s, particularly how they might influence relationships between host countries and companies in the oil industry. State owned companies will dominate the industry in resource terms. These statcos fall into three groups: a small group of technically able, financially sound, well-managed companies; a group of consumer statcos that have limited domestic production but significant domestic demand; a large group that are finding it difficult to maintain their production facilities in good standing to maximize recovery from their resources. This paper describes the future private sector as consisting of the Surviving Sisters and smaller, private companies very active in the upstream. How will these various players behave in the years to come? Conventional activity in the upstream will continue as companies seek to optimize their upstream portfolios

Survey on the Use of LCA in European Chemical Industry

DEFF Research Database (Denmark)

Olsen, Stig Irving

1999-01-01

During 1997 a questionnaire was sent to 40 European chemical manufacturers representing different positions in the supply chain. 25 companies (62.5%) responded, of which 23 had been involved in LCA to some degree. The questionnaire consisted of 30 questions divided into four parts dealing...... industry has taken up the LCA methodology and is testing its applicability for their purposes, although they still feel the methodology is a bit immature. The resources devoted to LCA depends to a great extent on the company's position in the supply chain and on the size of the company. Many of the LCA...

Intervención de ergonomía participativa en una empresa del sector químico A participatory ergonomics program in a chemical company

Directory of Open Access Journals (Sweden)

Ana M. García

2012-08-01

Full Text Available Se describe una intervención de ergonomía participativa iniciada en abril de 2010 en una empresa del sector químico de la Comunidad Valenciana. Se presentó el programa de intervención en la empresa, se acordó el ámbito de la intervención (dos líneas, 24 trabajadores y trabajadoras y se constituyó un grupo de trabajo (Grupo Ergo, formado por personas responsables, técnicos y delegados de prevención de la empresa encargado de guiar la intervención. Se recogió mediante cuestionario información acerca de daños y riesgos ergonómicos en los trabajadores y trabajadoras de los puestos seleccionados. Esta información fue analizada por el Grupo Ergo y discutida posteriormente en círculos de prevención, con la participación de los trabajadores y trabajadoras afectados. En el momento de redactar esta nota, como resultado del proceso se ha acordado ya implementar 16 medidas de mejora en las condiciones de trabajo, algunas de las cuales se han mostrado eficaces según la opinión de algunos de los participantes. Un compromiso firme en prevención por parte de la empresa es condición necesaria para poder llevar a cabo este tipo de programas, de los cuales podrían beneficiarse un número sustancial de trabajadores y trabajadoras en España.We describe a participatory ergonomics program that started in April 2010 in a chemical company located in the autonomous region of Valencia, Spain. The program was introduced in the company, the intervention level was agreed (two working lines, 24 workers and a working group was established (Ergo Group, including managers, technicians and safety representatives in the company with the aim of leading the intervention. A questionnaire was applied to collect information on ergonomic injuries and exposures in workers at the selected working lines. This information was analyzed by the Ergo Group and was later discussed at prevention circles with the direct participation of affected workers. When the present

Global oil company profiles

International Nuclear Information System (INIS)

1997-01-01

Global Oil Company Profiles provides a comprehensive review of 50 of the top oil companies in the world. Each chapter is devoted to an individual company, providing an invaluable insight into the organisation, its structure and operations. Using the most recent data available, the report offers an up-to-date analysis of performance and future direction, as well as a unique benchmarking system for each company profiled. (author)

Potential for Intermodal Transport of Chemical Goods in Slovakia

Directory of Open Access Journals (Sweden)

Jagelčák Juraj

2017-01-01

Full Text Available This article deals with intermodal transport of chemical goods in Slovak republic. Analysis is based on information from interviews with companies and logistics service providers. The first part of the article describes importance of Intermodal transport and basic transport routes for intermodal transport. Respondents considered advantages and disadvantages of intermodal transport. Possible improvements inside companies and improvements of external framework conditions to promote modal shift are described in the second part of the paper.

SAFER - Company Snapshot

Data.gov (United States)

Department of Transportation — The Company Snapshot is a concise electronic record of company identification, size, commodity information, and safety record, including the safety rating (if any),...

Risk profile of microbiological and chemical contamination in the production chain of nine horticultural products for fresh consumption of a group of agricultural companies in the Costa Rican Central Valley

Directory of Open Access Journals (Sweden)

Guillermo Vargas Hernández

2015-11-01

Full Text Available The risk of microbiological or chemical contamination was determined in each of the processes of the production system of produce for fresh consumption, in a population of 164 agricultural companies in the central valley of Costa Rica. The risk quantification was calculated using the responses to a 46-item survey conducted with the managers of the companies included in the study. The responses to the 46 items were grouped according to the production process; the risk contamination calculation formula validated by the authors in another study was used to obtain the risk value per process. The microbiological or chemical contamination risk results were calculated for the land preparation and planting process, cultural management of the crop, human factor performing the cultural management of the crop, phytosanitary control, harvesting, packaging, and the human factor involved in packaging. The risk analysis results indicate that the human factor participating in the packaging obtains the highest risk rating, followed by the cultural management of the crop and, in third place, by the harvesting process. In all processes where the risk was quantified, the results showed values close to or greater than 50 in a 0 to 100 risk scale. These results should alert producers and consumers of produce for fresh consumption in the analyzed population. The effect of the buyer on the packaging risk values was also observed; when the producers are supermarket chain suppliers the risk values are lower as compared to those of producers who are not supermarket chain suppliers.

Toxic fables: the advertising and marketing of agricultural chemicals in the great plains, 1945-1985.

Science.gov (United States)

Vail, David D

2012-12-01

This paper examines how pesticides and their technologies were sold to farmers and pilots throughout the midtwentieth century. It principally considers how marketing rhetoric and advertisement strategies used by chemical companies and aerial spraying firms influenced the practices and perspectives of farm producers in the Great Plains. In order to convince landowners and agricultural leaders to buy their pesticides, chemical companies generated advertisements that championed local crop health, mixture accuracy, livestock safety and a chemical-farming 'way of life' that kept fields healthy and productive. Combining notions of safety, accuracy and professionalism with pest eradication messages reinforced the standards that landowners, pilots and agriculturalists would hold regarding toxicity and risk when spraying their fields. As the politics of health changed in the aftermath of Rachel Carson's Silent Spring, these companies and aerial spraying outfits responded by keeping to a vision of agricultural health that required poisons for protection through technological accuracy. Copyright © 2012 Elsevier Ltd. All rights reserved.

Best practices in incident investigation in the chemical process industries with examples from the industry sector and specifically from Nova Chemicals

International Nuclear Information System (INIS)

Morrison, Lisa M.

2004-01-01

This paper will summarize best practices in incident investigation in the chemical process industries and will provide examples from both the industry sector and specifically from NOVA Chemicals. As a sponsor of the Center for Chemical Process Safety (CCPS), an industry technology alliance of the American Institute of Chemical Engineers, NOVA Chemicals participates in a number of working groups to help develop best practices and tools for the chemical process and associated industries in order to advance chemical process safety. A recent project was to develop an update on guidelines for investigating chemical process incidents. A successful incident investigation management system must ensure that all incidents and near misses are reported, that root causes are identified, that recommendations from incident investigations identify appropriate preventive measures, and that these recommendations are resolved in a timely manner. The key elements of an effective management system for incident investigation will be described. Accepted definitions of such terms as near miss, incident, and root cause will be reviewed. An explanation of the types of incident classification systems in use, along with expected levels of follow-up, will be provided. There are several incident investigation methodologies in use today by members of the CCPS; most of these methodologies incorporate the use of several tools. These tools include: timelines, sequence diagrams, causal factor identification, brainstorming, checklists, pre-defined trees, and team-defined logic trees. Developing appropriate recommendations and then ensuring their resolution is the key to prevention of similar events from recurring, along with the sharing of lessons learned from incidents. There are several sources of information on previous incidents and lessons learned available to companies. In addition, many companies in the chemical process industries use their own internal databases to track recommendations from

Why small and medium chemical companies continue to pose severe environmental risks in rural China

International Nuclear Information System (INIS)

He, Guizhen; Zhang, Lei; Mol, Arthur P.J.; Wang, Tieyu; Lu, Yonglong

2014-01-01

In China, rural chemical SMEs are often believed to still largely operate below the sustainability radar. This paper investigates to what extent and how chemical SMEs are already experiencing pressure to improve their environmental performance, using an in-depth case study in Jasmine County, Hebei province. The results show that local residents had rather low trust in the environmental improvement promises made by the enterprises and the local government, and disagreed with the proposed improvement plans. Although the power of local residents to influence decision making remained limited, the chemical SMEs started to feel increasing pressures to clean up their business, from governments, local communities and civil society, and international value chain stakeholders. Notwithstanding these mounting pressures chemical SME's environmental behavior and performance has not changed radically for the better. The strong economic ties between local county governments and chemical SMEs continue to be a major barrier for stringent environmental regulation. -- Highlights: • Rural chemical SMEs are often below the sustainability radar in China. • Close local government-SMEs tie remained as a barrier for effective environmental enforcement. • Rural communities proved unable to collectively raise their voice. • National government must adopt environment-oriented political incentives. -- The paper provides a major understanding of how and why the large number of existing chemical SMEs in rural China still form major chemical risks

THEORETICAL ESSAY ABOUT THE RELATION BETWEEN FINANCIAL LEVERAGE AND INVESTMENT IN BRAZILIAN COMPANIES

Directory of Open Access Journals (Sweden)

Aline Midori Kuroda

2015-12-01

Full Text Available The quest for understanding the relationship between the capital structure and investment decisions resulted in many different authors contribution. In the Brazilian economic scenario, an empirical study performed by Albuquerque and Matias (2013 identified the existence of a strong negative relation between finance leverage and investment in Brazilian public companies. The purpose of this study was to investigate whether the theory of finance supports these empirical findings or if there is a discrepancy between the practical behavior and the theoretical rules. To this end, it was performed a bibliographic research of scientific works related with this theme, among them Carneiro, Salles and Wu (2006, Hadlock and Pierce (2010 and Dang (2011. The methodology of this research can be classified as exploratory, according to its purpose, qualitative in terms of approach and bibliographical considering its technical procedures. All the developed analysis led to the formulation of six theoretical propositions that support the relation between financial leverage and investment. The negative and positive effects of debt were considered according to growth opportunities, the supply of credit in the Brazilian context, the raising of risk and cost of capital and the allocation of resources obtained through external funding. Briefly, it can be concluded that these six theoretical propositions could serve as the fundamentals of the relation in question, two being based on the under-investment and overinvestment theories and the other four, on the Brazilian financial market aspects. All of them must be considered in the decision making of a financial manager, especially the related with the financing options.

The corrosion resistance of materials used for the manufacture of ear piercing studs

Directory of Open Access Journals (Sweden)

Correa, O. V.

2003-12-01

Full Text Available Nickel containing alloys have been widely used as substrates for the manufacture of studs used for ear piercing. Unfortunately, nickel has also been related to the development of allergic contact dermatitis caused by skin sensitization due to Ni²⁺ ions. Nickel ions can be leached out into the body fluids due to corrosion reactions. Defect free coatings are very difficult to produce, and therefore nickel free materials should be used as substrates of ear piercing studs, although the commercial alloys used usually contain this element. In this study, the corrosion resistance of two kinds of commercial studs prepared with nickel containing substrates and a titanium laboratory made stud was determined in a culture medium. The corrosion resistance of the studs was investigated by means of potentiodynamic polarization tests and electrochemical impedance spectroscopy as a function of immersion time in the culture medium. The elements that leached out into the medium due to corrosion reactions were analyzed by instrumental neutron activation analysis. The surfaces of the commercial gold-coated studs were examined by scanning electron microscopy and analyzed by energy dispersive spectroscopy, both before and after exposure to the culture medium. The cytotoxicity of the tested studs was also determined in the culture medium.

Aleaciones conteniendo níquel se han utilizado como substratos para la fabricación de aretes perforantes para orejas. Desafortunadamente, el níquel ha sido relacionado con el desarrollo de una reacción alérgica conocida como dermatitis de contacto, causada por la sensibilización debido a los iones de Ni²⁺. Estos iones pueden ser liberados hacia los fluidos corporales debido a las reacciones de corrosión. Los aretes, habitualmente, se revisten con películas de oro. Sin embargo, es muy difícil hacer los revestimientos libres de defectos superficiales. Por lo tanto, materiales sin níquel deber

17 CFR 250.12 - Exemption of certain public utility companies from the definition of subsidiary companies of...

Science.gov (United States)

2010-04-01

... utility companies from the definition of subsidiary companies of holding companies. 250.12 Section 250.12... REGULATIONS, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 Registration and General Exemptions § 250.12 Exemption of certain public utility companies from the definition of subsidiary companies of holding companies...

Section 1: Company directory

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a 1992 directory of those companies doing business in all areas of the independent power producers industry. The listing includes the company name, address, telephone and FAX numbers, and the name of a company contact. The listing is international in scope

The Influence of R&D Policy on Performance of the Companies Listed with Bucharest Stock Exchange (through Intangible Assets

Directory of Open Access Journals (Sweden)

Ion Stancu

2008-09-01

Full Text Available In the new economy, R&D potential of the companies (reflected by intangible assets tends to make the difference between competing enterprises. Although investing in tangible assets is still viewed as important, the researchers have discovered that investors on capital market tend to buy stocks of the high-tech companies promoting a policy of increasing R&D expenditures.The results of the present study on the Romanian economy reveals the correlation between the variation of intangible assets of the chemicals and pharmaceuticals companies (high-tech and their performance – reflected by EPS and PER coefficients.

Global gas company profiles

International Nuclear Information System (INIS)

1997-01-01

This report provides a detailed assessment of 60 of the top gas companies form around the world, analysing them according to their internal dynamics and in relation to their competitors. It devotes each chapter to an individual company, providing invaluable insight into the organisation's operational background, financial performance and strategic goals. Using the most up-to-date information available, Global Gas Company Profiles allows you to make detailed analysis of each company's performance and future direction. (author)

Are Entrepreneur-Led Companies Better? Evidence from Publicly Traded U.S. Companies: 1998-2010

Directory of Open Access Journals (Sweden)

Joel M. Shulman

2010-12-01

Full Text Available Do U.S. publicly-traded companies led by entrepreneurs perform better than nonentrepreneur-led U.S. public companies? Our data suggests they do. We analyze monthly stock returns of U.S. publicly traded companies over the time period 1998-2010 and find compelling evidence demonstrating that irrespective of market capitalization and time period, companies led by U.S. entrepreneurs provide better stock performance than several stock market indices primarily comprised of non-entrepreneur-led U.S. companies.

Born global companies: A case study about the internationalization behaviours of Portuguese companies

OpenAIRE

Carlos, Diogo Miguel Pais Grou Simões

2015-01-01

Portuguese Born Global Companies have been performing an important role in the Portuguese market, mainly due to their innovative ideas and the positive contribution to exportations. This study focuses on the international strategies of four of these companies, comparing them with four international Non-Born Global Companies, in qualitative analysis. It will be possible to see a preference by the Non-Born Global Companies over proximate cultural countries. By following opportunities instead...

Employee motivation and work performance: A comparative study of mining companies in Ghana

Directory of Open Access Journals (Sweden)

Elizabeth Boye Kuranchie-Mensah

2016-04-01

Full Text Available Purpose: The paper empirically compares employee motivation and its impact on performance in Ghanaian Mining Companies, where in measuring performance, the job satisfaction model is used. Design/methodology/approach: The study employed exploratory research design in gathering data from four large-scale Gold mining companies in Ghana with regards to their policies and structures in the effectiveness of motivational tools and strategies used by these companies. Findings: The study observed that, due to the risk factors associated with the mining industry, management has to ensure that employees are well motivated to curb the rate at which employees embark on industrial unrest which affect performance, and employees are to comply with health and safety rules because the industry contribute hugely to the Gross Domestic Product (GDP of the country. Research Limitations/Implications: Limitation to the present study include the researcher’s inability to contact other mining companies. However, the study suggests possibilities for future research including contacting other mining companies, expanding the sample size, managers ensuring that the safety and health needs of staff are addressed particularly those exposed to toxic and harmful chemicals. Originality/Value: A lot of studies have been done on mining companies in the past. This paper fills a gap perceived that employees in this sector are highly motivated in spite of the challenges being faced by them, and knowing more about what keeps employees moving is still of national interest.

The effect of storage on Physical, Chemical and Bacteriological ...

African Journals Online (AJOL)

ADOWIE PERE

Ten (10) different companies' water samples each of bottled water (B) and ... after storage as with other chemical element except that lead showed ... Although it is true that soil generally ... organic pollutants, heavy metals and radioactive.

Secondary cleanup of Idaho Chemical Processing Plant solvent

International Nuclear Information System (INIS)

Mailen, J.C.

1985-01-01

Solvent from the Idaho Chemical Processing Plant (ICPP) (operated by Westinghouse Idaho Nuclear Company, Inc.) has been tested to determine the ability of activated alumina to remove secondary degradation products - those degradation products which are not removed by scrubbing with sodium carbonate

Temperature profiles from expendable bathythermograph (XBT) casts from NOAA Ship RESEARCHER and the G. W. PIERCE in the Gulf of Mexico in support of the Integrated Global Ocean Services System (IGOSS) from 1979-09-12 to 1979-10-02 (NODC Accession 7900341)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — XBT data were collected from NOAA Ship RESEARCHER and the G. W. PIERCE in support of the Integrated Global Ocean Services System (IGOSS). Data were collected by the...

75 FR 36153 - Surety Companies Acceptable on Federal Bonds-Terminations: Victore Insurance Company

Science.gov (United States)

2010-06-24

... from this company, and bonds that are continuous in nature should not be renewed. The Circular may be... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Terminations: Victore Insurance Company AGENCY: Financial Management Service, Fiscal Service, Department of the...

Management of change: Lessons learned from staff reductions in the chemical process industry

NARCIS (Netherlands)

Zwetsloot, G.I.J.M.; Gort, J.; Steijger, N.; Moonen, C.

2007-01-01

Increasing global competition and shareholder pressure are causing major changes in the chemical industry. Over the last decade companies have been continuously improving staff efficiency. As a result, most modern chemical plants can be regarded as lean. Plans to further reduce the number of staff

Company environmental communication

International Nuclear Information System (INIS)

Andriola, L.; Luciani, R.; Borghini, S.

2001-01-01

Environmental communication is becoming a sine qua non for companies which are more and more pressed by the need to reinforce communication with interested parties: environmental groups, local communities, local and national authorities, employees, share-holders, banks, insurance companies, customers and consumers. Reliable environmental information, just like economical and property data, is now required during both company take-over and financing, and in some cases it can affect insurance premiums. In fact, environmental guarantees are more and more often required because breaching environmental regulations can entail legal sanctions going as far as suspension of business. There now also Green investment funds that engage their resources only against specific environmental guarantees on the part of the companies that, before being selected for the investment, are submitted to rather accurate questionnaires by the investment manager [it

International company restructuring and the effects on high-skilled employees in lead companies

DEFF Research Database (Denmark)

Hansen, Nana Wesley

2016-01-01

insulated from international restructuring processes. However, effects on wage and working conditions vary dependent on the motivation for restructuring, and as companies learn to take advantage of pools of skilled employees abroad. Continued international restructuring appear to challenge the insulation......International company restructuring involving knowledge intensive jobs causes increasing concern about the effect on the globalization of high-skilled employees. Drawing on case studies in four Danish-based companies, this article argues that high-skilled employees in lead companies are rarely...... of high-skilled workers over time. Further, the article shows that knowledge intensive Companies increasingly apply relational global value chain governance with multidirectional consequences for wage and working conditions among the high-skilled employees....

76 FR 30397 - Faribault Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of...

Science.gov (United States)

2011-05-25

... Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of Faribault Woolen Mill... December 9, 2009, applicable to workers of Faribault Woolen Mill Company, Faribault, Minnesota. The notice... Mill Company, a retail outlet store for the subject firm, Faribault Woolen Mill Company. Accordingly...

Chemical and Physical Properties of Hi-Cal-2

Science.gov (United States)

Spakowski, A. E.; Allen, Harrison, Jr.; Caves, Robert M.

1955-01-01

As part of the Navy Project Zip to consider various boron-containing materials as possible high-energy fuels, the chemical and physical properties of Hi-Cal-2 prepared by the Callery Chemical Company were evaluated at the NACA Lewis laboratory. Elemental chemical analysis, heat of combustion, vapor pressure and decomposition, freezing point, density, self ignition temperature, flash point, and blow-out velocity were determined for the fuel. Although the precision of measurement of these properties was not equal to that obtained for hydrocarbons, this special release research memorandum was prepared to make the data available as soon as possible.

Transcriptome analysis of the phytobacterium Xylella fastidiosa growing under xylem-based chemical conditions.

Science.gov (United States)

Ciraulo, Maristela Boaceff; Santos, Daiene Souza; Rodrigues, Ana Claudia de Freitas Oliveira; de Oliveira, Marcus Vinícius; Rodrigues, Tiago; de Oliveira, Regina Costa; Nunes, Luiz R

2010-01-01

Xylella fastidiosa is a xylem-limited bacterium responsible for important plant diseases, like citrus-variegated chlorosis (CVC) and grapevine Pierce's disease (PD). Interestingly, in vitro growth of X. fastidiosa in chemically defined media that resemble xylem fluid has been achieved, allowing studies of metabolic processes used by xylem-dwelling bacteria to thrive in such nutrient-poor conditions. Thus, we performed microarray hybridizations to compare transcriptomes of X. fastidiosa cells grown in 3G10-R, a medium that resembles grape sap, and in Periwinkle Wilt (PW), the complex medium traditionally used to cultivate X. fastidiosa. We identified 299 transcripts modulated in response to growth in these media. Some 3G10R-overexpressed genes have been shown to be upregulated in cells directly isolated from infected plants and may be involved in plant colonization, virulence and environmental competition. In contrast, cells cultivated in PW show a metabolic switch associated with increased aerobic respiration and enhanced bacterial growth rates.

Transcriptome Analysis of the Phytobacterium Xylella fastidiosa Growing under Xylem-Based Chemical Conditions

Directory of Open Access Journals (Sweden)

Maristela Boaceff Ciraulo

2010-01-01

Full Text Available Xylella fastidiosa is a xylem-limited bacterium responsible for important plant diseases, like citrus-variegated chlorosis (CVC and grapevine Pierce's disease (PD. Interestingly, in vitro growth of X. fastidiosa in chemically defined media that resemble xylem fluid has been achieved, allowing studies of metabolic processes used by xylem-dwelling bacteria to thrive in such nutrient-poor conditions. Thus, we performed microarray hybridizations to compare transcriptomes of X. fastidiosa cells grown in 3G10-R, a medium that resembles grape sap, and in Periwinkle Wilt (PW, the complex medium traditionally used to cultivate X. fastidiosa. We identified 299 transcripts modulated in response to growth in these media. Some 3G10R-overexpressed genes have been shown to be upregulated in cells directly isolated from infected plants and may be involved in plant colonization, virulence and environmental competition. In contrast, cells cultivated in PW show a metabolic switch associated with increased aerobic respiration and enhanced bacterial growth rates.

Providing policy information at the local level. [Dow Chemical Co

Energy Technology Data Exchange (ETDEWEB)

Vaughan, H W

1977-01-01

Dow Chemical's approach to plant waste management has enabled the company to conribute to a broader understanding of worldwide environmental problems at no net cost to the company. A Corporate Ecology Council was formed in 1970 in response to public concern over mercury in St. Claire River fish. The Council adopted an environmental policy dedicated to providing quality and leadership in environmental improvement. This was followed by steps to identify and monitor hazardous wastes and to improve waste treatment technology. A group of sub-councils and technology centers was established. The company increased employee responsibilities rather than expand the staff and incorporated environmental performance in the employee evaluation procedure. (DCK)

Company Vision and Organizational Learning

Directory of Open Access Journals (Sweden)

Vojko Toman

2015-11-01

Full Text Available The effectiveness of a company is largely dependent on the company itself; it depends above all on its corporate governance, management, and implementation, as well as on decision-making processes and coordination. Many authors believe that organizational learning and knowledge are the most relevant aspects of company effectiveness. If a company wants to be effective it needs to create and realize its vision; to do this, it needs creativity, imagination, and knowledge, which can be obtained or enhanced through learning. This paper defines vision, learning, creativity and management and, above all, their relationships. The author argues that company vision influences the learning and knowledge of employees in the company through the vision’s content, through the vision-creating process, and through the vision enforcement process. Conversely, the influence of learning on company vision is explained. The paper is aimed at the use in the practice of companies and helps them to increase their effectiveness.

Oil Companies Climb Global List

Institute of Scientific and Technical Information of China (English)

JESSY ZHANG

2006-01-01

@@ Backed by the huge market size,China's energy companies have been ranked in the group of the world's largest industry players. On September 6th,eight companies from the Chinese mainland and six companies from Hong Kong SAR were included in this year's Platts Top 250 Energy Companies List.

The nature of outsourced preclinical research--the example of chemical synthesis.

Science.gov (United States)

Festel, Gunter W

2013-09-01

The possibility to buy standardized external services or even new and innovative methods within drug discovery has increased dramatically during the last decades. Service providers are able to provide timely and efficient solutions to any given problem within preclinical research. The outsourcing behavior depends on the specific company type. Generally, the outsourcing level of emerging pharmaceutical and biotechnology companies is much higher than established companies due to low or missing internal resources. Whereas the "make-or-buy" decisions of large and fully integrated pharmaceutical companies are mainly competency driven, those of mid-size and small pharmaceutical, as well as biotech companies show a specific combination of cost/capacity and competency. The three different cooperation models "price competition", "project selection," and "strategic partnership" were identified. For all types of companies, the cooperation model of "strategic partnership" offers access to high-level expertise while reducing fixed costs and complexity. This was shown using chemical synthesis as an example but is also true for other areas of preclinical research.

78 FR 15053 - Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington...

Science.gov (United States)

2013-03-08

...,372B] Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington; Simpson Lumber Company, LLC, Longview, Washington; Notice of Revised Determination on Reconsideration On... Reconsideration for the workers and former workers of Simpson Lumber Company, LLC, Shelton, Washington (TA-W-81...

Company profile: Edison of Italy

International Nuclear Information System (INIS)

Anon.

1992-01-01

The energy subsidiary of the Montedison chemicals company (Ferruzzi Group), Edison is Italy's largest private sector electricity producer. Last year production amounted to 4.7 TWh, an increase of 8.2% on 1990, and at the end of June this year, total net production of 2.4 TWh was 14.8% higher than in the first half of 1991. Edison also ranks first in the Italian league of private sector hydrocarbons producers, its Edison Gas subsidiary controlling a group that has significant exploration and development interests. These are mainly in Italy where production amounted to 333m cubic metres of natural gas and 690,000 barrels of oil in the first half of the year. The recent acquisition of Deutsche Shell's Italian fields should allow Edison to reach 2bn cubic metres of gas production by 1996. (author)

Study on Municipal Energy Companies

International Nuclear Information System (INIS)

2009-07-01

This is a summarizing overview of the local, renewable energy initiatives that are grouped under the heading of 'municipal energy company'. A municipal energy company (or sustainable energy company) is a local energy company that initiates, coordinates and/or manages sustainable energy projects with the primary objective of realizing the climate objectives. [nl

Factors Influencing Company Relations with Market Stakeholders, in the Face of Crises in Company Development

Directory of Open Access Journals (Sweden)

Olszewska Barbara

2014-06-01

Full Text Available Crises in company development are a particular subset of management crises. They emerge on various stages of company development, as a result of gradual depletion of effective management solutions. Crisis situations in companies have varied impact on company stakeholders. The paper presents results of empirical studies of factors influencing company relations with market stakeholders and those that facilitate the process of restoring and maintaining any relations that suffered in the course of crises in company development. The authors’ intention was to identify such factors and evaluate their importance, in relation to various stages of company development and the associated types of crisis situations faced by companies. Empirical studies suggest that certain factors may facilitate conflict resolution in matters concerning company relations with market stakeholders, and that the impact of these factors varies depending on the phase of organizational development and the type of the associated crisis situation. It must be noted, that one of the most important factors to influence problem resolution is the perceived honesty of the exchange participants. Moreover, research suggests that opinions on the significance of organizational dependence of exchange participants in the resolution of problems in relations with market stakeholders are varied.

ONE PERSON COMPANY IN INDIA: A SYNOPTIC VIEW IN THE LIGHT OF THE COMPANIES ACT, 2013

OpenAIRE

ROY, SUHAS

2016-01-01

One Person Company (OPC) is a revolutionary concept that has been elaborately discussed in the Companies Act, 2013. It is one of the classifications of companies based on the number of persons. One Person Company (OPC) means a company which has only one individual as a member. Only natural-born citizens viz., small businessmen, entrepreneurs, artisans, weavers or traders among others can reap the benefits of One Person Company (OPC). Non-resident Indians cannot form an OPC. The shareholder sh...

Why small and medium chemical companies continue to pose severe environmental risks in rural China.

Science.gov (United States)

He, Guizhen; Zhang, Lei; Mol, Arthur P J; Wang, Tieyu; Lu, Yonglong

2014-02-01

In China, rural chemical SMEs are often believed to still largely operate below the sustainability radar. This paper investigates to what extent and how chemical SMEs are already experiencing pressure to improve their environmental performance, using an in-depth case study in Jasmine County, Hebei province. The results show that local residents had rather low trust in the environmental improvement promises made by the enterprises and the local government, and disagreed with the proposed improvement plans. Although the power of local residents to influence decision making remained limited, the chemical SMEs started to feel increasing pressures to clean up their business, from governments, local communities and civil society, and international value chain stakeholders. Notwithstanding these mounting pressures chemical SME's environmental behavior and performance has not changed radically for the better. The strong economic ties between local county governments and chemical SMEs continue to be a major barrier for stringent environmental regulation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Radiation protection in the pharmaceutical-chemical industry

International Nuclear Information System (INIS)

Griesser, R.

1992-01-01

Some aspects of the use of ionizing radiation in research in the pharmaceutical and chemical industries will be discussed, the emphasis being placed on the handling of open radioactive materials in research laboratories. The compliance with official regulations and the preparation of company internal radiation protection regulations are described. 1 tab., 9 refs

Design of experiment existing parameter physics for supporting of Boron Neutron Capture Therapy (BNCT) method a t the piercing radial beam port of Kartini research reactor

International Nuclear Information System (INIS)

Indry Septiana Novitasari; Yosaphat Sumardi; Widarto

2014-01-01

The experiment existing parameters physics for supporting of in vivo and in vitro test facility of Boron Neutron Capture Therapy (BNCT) preliminary study at the piercing radial beam port has been done. The existing experiments is needed for determining that the parameter physics is fulfill the BNCT method requirement. To realize the existing experiment have been done by design analysis, methodology, calculation method and some procedure related with radiation safety analysis and environment. Preparation for existing experiment physics such as foil detector of Gold (Au) should be irradiated for 30 minute, irradiation instrument and procedure related with the experiment for radiation safety. (author)

Proteomics approach to identify unique xylem sap proteins in Pierce's disease-tolerant Vitis species.

Science.gov (United States)

Basha, Sheikh M; Mazhar, Hifza; Vasanthaiah, Hemanth K N

2010-03-01

Pierce's disease (PD) is a destructive bacterial disease of grapes caused by Xylella fastidiosa which is xylem-confined. The tolerance level to this disease varies among Vitis species. Our research was aimed at identifying unique xylem sap proteins present in PD-tolerant Vitis species. The results showed wide variation in the xylem sap protein composition, where a set of polypeptides with pI between 4.5 and 4.7 and M(r) of 31 kDa were present in abundant amount in muscadine (Vitis rotundifolia, PD-tolerant), in reduced levels in Florida hybrid bunch (Vitis spp., PD-tolerant) and absent in bunch grapes (Vitis vinifera, PD-susceptible). Liquid chromatography/mass spectrometry/mass spectrometry analysis of these proteins revealed their similarity to beta-1, 3-glucanase, peroxidase, and a subunit of oxygen-evolving enhancer protein 1, which are known to play role in defense and oxygen generation. In addition, the amount of free amino acids and soluble sugars was found to be significantly lower in xylem sap of muscadine genotypes compared to V. vinifera genotypes, indicating that the higher nutritional value of bunch grape sap may be more suitable for Xylella growth. These data suggest that the presence of these unique proteins in xylem sap is vital for PD tolerance in muscadine and Florida hybrid bunch grapes.

Third European Company Survey: Workplace innovation in European companies

OpenAIRE

Oeij, P.; Žiauberyté-Jakštiené, R.; Dhondt, S.; Corral, A.; Totterdill, P.; Preenen, P.

2015-01-01

Workplace innovation (WPI) is a developed and implemented practice or combination of practices which enables employees to participate in organisational change and renewal and hence improve the quality of working life and organisational performance. This report looks at reasons for enabling WPI, adoption and implementation, and impact on organisation and management, employees and employee representatives. The research is based on 51 companies identified in Eurofound’s third European Company Su...

75 FR 6791 - Surety Companies Acceptable on Federal Bonds-Termination: Trinity Universal Insurance Company

Science.gov (United States)

2010-02-10

.... However, no new bonds should be accepted from this company, and bonds that are continuous in nature should... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Trinity Universal Insurance Company AGENCY: Financial Management Service, Fiscal Service...

77 FR 29472 - Surety Companies Acceptable on Federal Bonds-Termination: Atlantic Bonding Company, Inc.

Science.gov (United States)

2012-05-17

... be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Atlantic Bonding Company, Inc. AGENCY: Financial Management Service, Fiscal Service, Department...

75 FR 33897 - Surety Companies Acceptable on Federal Bonds-Terminations: Commercial Alliance Insurance Company

Science.gov (United States)

2010-06-15

... be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Terminations: Commercial Alliance Insurance Company AGENCY: Financial Management Service, Fiscal Service...

Geographical proximity on the valuations of unlisted agrarian companies: Does distance from company to company and to strategic points matter?

Energy Technology Data Exchange (ETDEWEB)

Occhino, P.; Maté, M.

2017-07-01

This paper is a first attempt to examine the role played by the geography on agrarian firms’ valuations. The geography was evaluated through the physical proximity from agrarian companies to other companies and to some strategic points which ease their accessibility to external economic agents. To get our purpose, we developed an empirical application on a sample of non-listed agrarian Spanish companies located in the region of Murcia over the period 2010-2015. We applied Discount Cash Flow methodology for non-listed companies to get their valuations. With this information, we used spatial econometric techniques to analyse the spatial distribution of agrarian firms’ valuations and model the behavior of this variable. Our results supported the assertion that agrarian firms’ valuations are conditioned by the geography. We found that firms with similar valuations tend to be grouped together in the territory. In addition, we found significant effects on agrarian firms valuations derived from the geographical proximity among closer agrarian companies and from them to external agents and transport facilities.

Geographical proximity on the valuations of unlisted agrarian companies: Does distance from company to company and to strategic points matter?

International Nuclear Information System (INIS)

Occhino, P.; Maté, M.

2017-01-01

This paper is a first attempt to examine the role played by the geography on agrarian firms’ valuations. The geography was evaluated through the physical proximity from agrarian companies to other companies and to some strategic points which ease their accessibility to external economic agents. To get our purpose, we developed an empirical application on a sample of non-listed agrarian Spanish companies located in the region of Murcia over the period 2010-2015. We applied Discount Cash Flow methodology for non-listed companies to get their valuations. With this information, we used spatial econometric techniques to analyse the spatial distribution of agrarian firms’ valuations and model the behavior of this variable. Our results supported the assertion that agrarian firms’ valuations are conditioned by the geography. We found that firms with similar valuations tend to be grouped together in the territory. In addition, we found significant effects on agrarian firms valuations derived from the geographical proximity among closer agrarian companies and from them to external agents and transport facilities.

75 FR 38188 - Surety Companies Acceptable on Federal Bonds-Termination: Stonebridge Casualty Insurance Company

Science.gov (United States)

2010-07-01

... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service [NAIC 10952] Surety Companies Acceptable on Federal Bonds--Termination: Stonebridge Casualty Insurance Company AGENCY: Financial Management Service, Fiscal...

75 FR 81331 - Surety Companies Acceptable on Federal Bonds: Termination-Penn Millers Insurance Company

Science.gov (United States)

2010-12-27

... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds: Termination--Penn Millers Insurance Company AGENCY: Financial Management Service, Fiscal Service, Department...

UK biotechnology companies lead the way for Europe

Energy Technology Data Exchange (ETDEWEB)

1984-05-01

A number of new well-structured biotechnology companies have been launched in Britain over the last few years, e.g. Imperial Biotechnology, IQ(Bio) and Celltech, while Wellcome and Searle (U.K.) are established firms, keeping up with the new technology. Imperial Biotechnology, with its accent on development rather than research and making products not in anyone else's catalogue, has produced a whole range of enzymes, biopolymers, antibiotics, and human proteins under contract. Its long term objective is to develop its own bioproducts. IQ(Bio) is poised to enter the diagnostic big league with its enzyme-linked immunoassay (Aelia) technology and intends to pursue opportunities where there is a strict regulatory climate prohibiting the growth of radioimmunoassays, e.g. France and Japan. It plans to produce kits that a doctor can use simply and give results in less than 30 minutes. Celltech has a culture products division which supplies large quantities of monoclonal antibodies, it has a diagnostics and health care research section, a speciality chemicals area and an industrial microbiology sector. Wellcome Biotechnology has an interferon programme which includes a broad range of chemical trials in the anticancer and antiviral areas. The company could supply the entire world market for interferon using cell culture and produces a very large range of conventional vaccines. Searle uses biotechnology as just another means of producing new drugs as they have a large drug development machine in place. A considerable amount of process development work has focused on Searle's artificial sweetener, aspartame, and they are looking at all the technical approaches to aspartame production.

Utilizing environmental management information systems to monitor chemical usage and facilitate waste minimization

Energy Technology Data Exchange (ETDEWEB)

Blazer, T.L.; Kinney, R.W. [Modern Technologies Corporation, Dayton, OH (United States)

1996-10-01

Waste minimization and pollution prevention activities have proven to be valuable to the chemical industry`s and the chemical user`s bottom line. Many companies have found that, with a modest initial capital investment and product modifications, mounds of bureaucratic liability can be removed and substantial cost savings can be realized.

Why job autonomy matters for young companies' performance: company maturity as a moderator between job autonomy and company performance

NARCIS (Netherlands)

Preenen, P.T.Y.; Howaldt, J.; Oeij, P.R.A.; Dhondt, S.; Kraan, K.O.; Jansen, E.

2016-01-01

Although the positive impact of job autonomy has been widely shown for individual-level employee outcomes, research on job autonomy and company-level outcomes has been surprisingly scarce. Therefore, among 3,311 companies in the Netherlands, we investigate the relationship between employees' job

76 FR 77442 - Mutual Insurance Holding Company Treated as Insurance Company

Science.gov (United States)

2011-12-13

... insurance industry traces its roots back to England, where, in 1696, the first mutual fire insurer was... FEDERAL DEPOSIT INSURANCE CORPORATION 12 CFR Part 380 RIN 3064-AD89 Mutual Insurance Holding Company Treated as Insurance Company AGENCY: Federal Deposit Insurance Corporation (FDIC). ACTION: Notice...

The European Model Company Act

DEFF Research Database (Denmark)

Cleff, Evelyne Beatrix

2011-01-01

European Company Law regulation is currently undergoing a reform. These reforms raise a number of regulatory questions, such as what should be the aims of companies' legislation, and how these aims should best be met by regulation. Many of the reforms and discussions (both on EU and national level...... an increasing influence on the framing of company legislation, such as the choice between mandatory or default rules. This article introduces the project 'European Company Law and the choice of Regulatory Method' which is carried out in collaboration with the 'European Model Company Act Group'. The project aims...

The Bat'a Company in Zlín: A Shoe Company or a School Company?

Science.gov (United States)

Kasper, Tomáš; Kasperová, Dana

2018-01-01

The first part of the study focuses on the characteristics and analysis of Zlín as an example of a company town. Life in the company town is characterised as a means of forming 'a new man' in Bat'a's Zlín. The second section analyses the aims of worker education in Bat'a's Zlín (in the so-called Bat'a school of work) and highlights the methods and…

Radioactive Waste Management at the New Conversion Facility of 'TVEL'R Fuel Company - 13474

International Nuclear Information System (INIS)

Indyk, S.I.; Volodenko, A.V.; Tvilenev, K.A.; Tinin, V.V.; Fateeva, E.V.

2013-01-01

The project on the new conversion facility construction is being implemented by Joint Stock Company (JSC) 'Siberian Group of Chemical Enterprises' (SGChE) within TVEL R Fuel Company. The objective is to construct the up-to-date facility ensuring the industrial and environmental safety with the reduced impact on the community and environment in compliance with the Russian new regulatory framework on radioactive waste (RW) management. The history of the SGChE development, as well as the concepts and approaches to RW management implemented by now are shown. The SGChE future image is outlined, together with its objectives and concept on RW management in compliance with the new act 'On radioactive waste management' adopted in Russia in 2011. Possible areas of cooperation with international companies are discussed in the field of RW management with the purpose of deploying the best Russian and world practices on RW management at the new conversion facility. (authors)

76 FR 58263 - Kenai Pipe Line Company; Tesoro Alaska Company; Tesoro Logistics Operations, LLC; Notice of...

Science.gov (United States)

2011-09-20

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. OR11-21-000] Kenai Pipe Line Company; Tesoro Alaska Company; Tesoro Logistics Operations, LLC; Notice of Request for Jurisdictional..., 2011, Kenai Pipe Line Company (KPL), Tesoro Alaska Company (Tesoro Alaska), and Tesoro Logistics, LLC...

78 FR 38309 - Northern Natural Gas Company; Southern Natural Gas Company, L.L.C.; Florida Gas Transmission...

Science.gov (United States)

2013-06-26

... Natural Gas Company; Southern Natural Gas Company, L.L.C.; Florida Gas Transmission Company, LLC; Notice of Application Take notice that on June 4, 2013, Northern Natural Gas Company (Northern), 1111 South 103rd Street, Omaha, Nebraska 68124; on behalf of itself, Southern Natural Gas Company, L.L.C., and...

A Study on an Executive Technique and Activation of Clean Production in Chemical Industry

Energy Technology Data Exchange (ETDEWEB)

Kong, Seong Yong; Lee, Hee Seok; Kim, Kang Seok [Korea Environment Institute, Seoul (Korea)

2000-12-01

Clean production does not only make the sustainable development possible through preventing the deterioration of the environmental pollution from the expansion of industrialization but also enhance the company's competitiveness. Clean production is required by all industrial fields but is the most important in chemical industry. The Government has made efforts to change the domestic industrial structure to the environmental-friendly structure through developing the research. However, the domestic industry has not yet activated overall except some large companies, which has concretized the activation of clean production. Especially, the medium and small companies are more sluggish due to the inferiority of capital and technology. With recognizing that the main body of clean production is a company, the effort based on the Government and the academic world, without companies' positive, will cannot help being limited in effects. Therefore, it is necessary to trigger the schemes that urge the companies' motivation to show the effects from the support that have concentrated in hardware like technology until now. It seems to be very important that the guidebook for clean production, which a company can easily adopt, is developed and spread. This report provides the guidebook for clean production that managers and engineers can easily understand and approach in a producing field and presents the scheme to promote clean production, for chemical industry that is seriously required clean production. Even if the presented contents are not perfect, they can be applied to the development of the Government's policy and the administrative activities of companies for clean production as a useful data. 53 refs., 5 figs., 30 tabs.

Organizational architecture of multinational companies

OpenAIRE

Sikorová, Lenka

2009-01-01

The main goal of the bachelor thesis Organizational Architecture of Multinational Companies is to elaborate the overview of organizational structures that are used by modern global companies. The thesis contains an analysis of such companies development, principles of functioning, pros and cons and the opportunities which these brings. It also contains a description of the basic concepts associated with organizational architecture such as globalization, multinational companies and organizatio...

Physical Quality of Air and Sick Building Syndrome in Office Employees of “X” Company in Jakarta

Directory of Open Access Journals (Sweden)

Rama Putra Effendi

2014-08-01

Full Text Available Physical symptoms had led to the suggestion that a disease called Sick Building Syndrome (SBS occured to the office of “X” Company in the city of Jakarta. This research that used a random sampling technique examined the physical air quality of the “X” Company, such as indoor temperature and humidity aspects, the SBS cases of 90 workers. Research results on the Company “X” office workers showed that, (1 47.8% workers had cases of SBS; and, (2 a value of 0.714 was acquired from the result of bivariate analysis using Chi square statistics program with p value of 0.325 and RP of 95 percent. This signifies that there were no relations between indoor temperature and humidity with the SBS cases of the Company “X” workers in Jakarta City. Possibilities of other factors were found to trigger the SBS symptoms such as chemical and microbiological factors (from work tools and facilities, and psychosocial factor (from the workers themselves

Vulnerability assessment of chemical industry facilities in South Korea based on the chemical accident history

Science.gov (United States)

Heo, S.; Lee, W. K.; Jong-Ryeul, S.; Kim, M. I.

2016-12-01

The use of chemical compounds are keep increasing because of their use in manufacturing industry. Chemical accident is growing as the consequence of the chemical use increment. Devastating damages from chemical accidents are far enough to aware people's cautious about the risk of the chemical accident. In South Korea, Gumi Hydrofluoric acid leaking accident triggered the importance of risk management and emphasized the preventing the accident over the damage reducing process after the accident occurs. Gumi accident encouraged the government data base construction relate to the chemical accident. As the result of this effort Chemical Safety-Clearing-house (CSC) have started to record the chemical accident information and damages according to the Harmful Chemical Substance Control Act (HCSC). CSC provide details information about the chemical accidents from 2002 to present. The detail informations are including title of company, address, business type, accident dates, accident types, accident chemical compounds, human damages inside of the chemical industry facilities, human damage outside of the chemical industry facilities, financial damages inside of the chemical industry facilities, and financial damages outside of the chemical industry facilities, environmental damages and response to the chemical accident. Collected the chemical accident history of South Korea from 2002 to 2015 and provide the spatial information to the each accident records based on their address. With the spatial information, compute the data on ArcGIS for the spatial-temporal analysis. The spatial-temporal information of chemical accident is organized by the chemical accident types, damages, and damages on environment and conduct the spatial proximity with local community and environmental receptors. Find the chemical accident vulnerable area of South Korea from 2002 to 2015 and add the vulnerable area of total period to examine the historically vulnerable area from the chemical accident in

Four state companies are markedly different

International Nuclear Information System (INIS)

Aalund, L.R.

1995-01-01

The Journal continues its profiles of state owned oil companies with a return to the Persian Gulf, South America, and a first time look at the state oil company of Romania, one of Eastern Europe's most active and oldest producers. The government of Kazakhstan's activities are also covered in this report. These profiles detail the organization of the companies, with emphasis on upstream and downstream operations. Support functions, though essential to a company, are not covered in detail. Company projects and capabilities are only described in this report when necessary to put the company in perspective. Following are the profiles of state companies for Bahrain, Kuwait, Romania, and Venezuela

Public Shareholdership Energy Companies

International Nuclear Information System (INIS)

Kist, A.W.; Crone, F.J.M.; Hudig, D.F.; Ketting, N.G.; De Swaan, T.; Willems, R.

2008-06-01

National and international developments on the energy markets and changes in legislation and regulation require a renewed strategic orientation of energy companies and their shareholders. Decentralized authorities will have to reconsider their position as a shareholder in energy companies carefully. This report provides an overview of the recommendations of the Kist Commission on how provinces and municipalities can make a well-considered choice as shareholder of energy companies. [mk] [nl

Development of chemical process for synthesis of polyunsaturated esters

OpenAIRE

Vera LÃcia Viana do Nascimento

2014-01-01

This work aimed to develop refining processes, chemical alcoholysis followed by separation of fatty acids using the complexation with urea technique for the synthesis of poly-unsaturated esters from waste of fish oils. The special crude fish oil was purchased from Company Campestre - SÃo Paulo. Initially this oil has undergone a process of physical and chemical refining. From the refined oil, an alcoholysis process was carried out to obtain the mixture of free fatty acids. From the hydrolyzed...

Criterion for selection the optimal physical and chemical properties of cobalt aluminate powder used in investment casting process

OpenAIRE

M. Zielińska; J. Sieniawski; B. Gajecka

2009-01-01

The aim of this work was to determine physical and chemical properties of cobalt aluminate (CoAl2O4) modifiers produced by different companies and the influence of different types of modifiers on the grain size of high temperature creep resisting superalloys: Inconel 713C, René 77 and MAR-M 509.The first stage of the research work took over the investigations of physical and chemical properties of cobalt aluminate manufactured by three different companies: Remet, Mason Color and Permedia Lubl...

77 FR 25235 - Significant New Use Rules on Certain Chemical Substances

Science.gov (United States)

2012-04-27

.... discusses a procedure companies may use to ascertain whether a proposed use constitutes a significant new...-00-2, P-00-5, and P-00-6 Chemical names: Polymeric MDI based polyurethanes (generic). CAS numbers...

Risk Management in Insurance Companies

OpenAIRE

Yang, Xufeng

2006-01-01

Insurance is the uncertain business in uncertain society. Today, insures face more complex and difficult risks. Efficient risk management mechanisms are essential for the insurers. The paper is set out initially to explore UK insurance companies risk management and risk disclosure by examining companies annual report after all the listed insurance companies are required to disclose risk information in their annual report, which seeks to reflect the recent development in UK insurance companies...

Formerly utilized MED/AEC sites remedial action program. Radiological survey of the Harshaw Chemical Company, Cleveland, Ohio

International Nuclear Information System (INIS)

Wynveen, R.A.; Smith, W.H.; Sholeen, C.M.; Justus, A.L.; Flynn, K.F.

1984-04-01

During the MED/AEC era, the Harshaw Chemical Company processed large quantities of normal uranium to produce both oxide and fluoride compounds. This work was done under contract to MED and its successor, AEC. Records indicated that at the time the AEC contract was terminated, the facility was decontaminated by Harshaw and released from AEC control in 1960. However, a search of AEC records indicated that documentation was insufficient to determine whether the decontamination work was adequate by current guidelines. Hence, a radiological assessment of the site ws initiated in 1976. The entire grounds and all buildings were surveyed using surface survey instruments to detect surface contamination and radiation detectors to determine general radiation levels. Extensive surface contamination was found throughout the site. While the major contamination was found in Plant C, significant levels of contamination also were found in 16 other buildings and at 32 exterior locations. The contaminating material seemed to be normal uranium exclusively. Air samples were taken at numerous indoor locations throughout the site, but no elevated levels of radon were detected. This was as expected since normal uranium has been separated from radium and hence radon levels are very low. Several soil samples were taken from around the site. Analyses of these samples indicated extensive soil contamination, as well as suspected contamination of the river bed in the vicinity of the plant outfall. Scheduled subsurface investigation of the site, as well as of the river bed and sewer system, have not been conducted. Levels of contamination at this site are significantly above guidelines for release of the site for unrestricted use. 57 figures, 7 tables

Company Secretaries: Their duties and powers

OpenAIRE

2009-01-01

Every company must have a company secretary. Their main role is to: carry out the directors’ instructions; help ensure that the company obeys the law and its own constitutional rules; and prepare and maintain the associated company documents.

CNG: Aiming to be an energy company, not a gas company

International Nuclear Information System (INIS)

Wheatley, R.

1997-01-01

Long before regulatory changes in the US paved the way for the union of natural gas and electric utility companies, Consolidated Natural Gas Co. (CNG) embarked on a strategy that would serve the company well in the 1990s. In 1995, CNG began a corporate repositioning to meet mounting competition, switching emphasis from its regulated businesses to the non-regulated side. The goal: to become an energy player, not only in the US but internationally. This paper focuses on the company's operations, business plans, and management strategies. The paper gives an overview, then discusses production of oil and gas, the growing exploration program and plans for the future

Startup activities of established Finnish companies

OpenAIRE

Saalasti, Sini

2016-01-01

Established companies have collaborated with startups for decades in order to enhance their capabilities in technology and innovation. However, in the recent years, the changes in the business environment have induced established companies to increase their collaboration with startups. Thus, startup activities of established companies have become a timely phenomenon. This study explores the startup activities of established companies by analyzing all the activity established companies conduct...

Electric Holding Company Areas

Data.gov (United States)

Department of Homeland Security — Holding companies are electric power utilities that have a holding company structure. This vector polygon layer represents the area served by electric power holding...

Property Model-Based Chemcal Substitution and Chemical Formulation Design

DEFF Research Database (Denmark)

Jhamb, Spardha Virendra; Liang, Xiaodong; Hukkerikar, Amol Shivajirao

Chemical-based products including structured product formulations and single molecule products have proven to be a boon to mankind and have been a significant part of our economies. Our life and the changes around us cannot be imagined without the presence or involvement of chemicals. But like...... with environmentally benign chemicals. Additionally, the decisions taken during chemical product design also have an impact on the process and product performance and are influenced by company strategy, availability of market and government policies [2]. Hence, undoubtedly there is a need to develop a systematic...... [3] will also be highlighted. A set of new group contribution-based models for a number of useful properties of amino acids will be presented. Through examples on substitution of chemicals from chemical-based products from various sectors namely cosmetics and personal care, pharmaceutical and food...

26 CFR 1.831-1 - Tax on insurance companies (other than life or mutual), mutual marine insurance companies, and...

Science.gov (United States)

2010-04-01

... mutual), mutual marine insurance companies, and mutual fire insurance companies issuing perpetual... companies (other than life or mutual), mutual marine insurance companies, and mutual fire insurance... insurance companies and mutual fire insurance companies exclusively issuing either perpetual policies, or...

Strategy Assessment of Company ECOPOSTES

OpenAIRE

Cortazar Sanabria, Javier Mauricio

2015-01-01

This thesis focuses on developing a research on the different types of strategies a company can implement depending on their situation and the various analyses that must be completed before making the strategy decision. External and internal environment methods are described together with the various forms of corporate restructure methods a company can use if needed. The whole process is followed step by step to provide a strategy assessment to company Ecopostes, a Colombian company focused o...

Modeling renewable energy company risk

International Nuclear Information System (INIS)

Sadorsky, Perry

2012-01-01

The renewable energy sector is one of the fastest growing components of the energy industry and along with this increased demand for renewable energy there has been an increase in investing and financing activities. The tradeoff between risk and return in the renewable energy sector is, however, precarious. Renewable energy companies are often among the riskiest types of companies to invest in and for this reason it is necessary to have a good understanding of the risk factors. This paper uses a variable beta model to investigate the determinants of renewable energy company risk. The empirical results show that company sales growth has a negative impact on company risk while oil price increases have a positive impact on company risk. When oil price returns are positive and moderate, increases in sales growth can offset the impact of oil price returns and this leads to lower systematic risk.

17 CFR 210.3-18 - Special provisions as to registered management investment companies and companies required to be...

Science.gov (United States)

2010-04-01

... registered management investment companies and companies required to be registered as management investment... Financial Statements § 210.3-18 Special provisions as to registered management investment companies and companies required to be registered as management investment companies. (a) For filings by registered...

Donated chemical probes for open science.

Science.gov (United States)

Müller, Susanne; Ackloo, Suzanne; Arrowsmith, Cheryl H; Bauser, Marcus; Baryza, Jeremy L; Blagg, Julian; Böttcher, Jark; Bountra, Chas; Brown, Peter J; Bunnage, Mark E; Carter, Adrian J; Damerell, David; Dötsch, Volker; Drewry, David H; Edwards, Aled M; Edwards, James; Elkins, Jon M; Fischer, Christian; Frye, Stephen V; Gollner, Andreas; Grimshaw, Charles E; IJzerman, Adriaan; Hanke, Thomas; Hartung, Ingo V; Hitchcock, Steve; Howe, Trevor; Hughes, Terry V; Laufer, Stefan; Li, Volkhart Mj; Liras, Spiros; Marsden, Brian D; Matsui, Hisanori; Mathias, John; O'Hagan, Ronan C; Owen, Dafydd R; Pande, Vineet; Rauh, Daniel; Rosenberg, Saul H; Roth, Bryan L; Schneider, Natalie S; Scholten, Cora; Singh Saikatendu, Kumar; Simeonov, Anton; Takizawa, Masayuki; Tse, Chris; Thompson, Paul R; Treiber, Daniel K; Viana, Amélia Yi; Wells, Carrow I; Willson, Timothy M; Zuercher, William J; Knapp, Stefan; Mueller-Fahrnow, Anke

2018-04-20

Potent, selective and broadly characterized small molecule modulators of protein function (chemical probes) are powerful research reagents. The pharmaceutical industry has generated many high-quality chemical probes and several of these have been made available to academia. However, probe-associated data and control compounds, such as inactive structurally related molecules and their associated data, are generally not accessible. The lack of data and guidance makes it difficult for researchers to decide which chemical tools to choose. Several pharmaceutical companies (AbbVie, Bayer, Boehringer Ingelheim, Janssen, MSD, Pfizer, and Takeda) have therefore entered into a pre-competitive collaboration to make available a large number of innovative high-quality probes, including all probe-associated data, control compounds and recommendations on use (https://openscienceprobes.sgc-frankfurt.de">https://openscienceprobes.sgc-frankfurt.dehttps://openscienceprobes.sgc-frankfurt.de/">/). Here we describe the chemical tools and target-related knowledge that have been made available, and encourage others to join the project. © 2018, Müller et al.

Hurricane Harvey, Houston's Petrochemical Industry, and US Chemical Safety Policy: Impacts to Environmental Justice Communities

Science.gov (United States)

Goldman, G. T.; Johnson, C.; Gutierrez, A.; Declet-Barreto, J.; Berman, E.; Bergman, A.

2017-12-01

When Hurricane Harvey made landfall outside Houston, Texas, the storm's wind speeds and unprecedented precipitation caused significant damage to the region's petrochemical infrastructure. Most notably, the company Arkema's Crosby facility suffered a power failure that led to explosions and incineration of six of its peroxide tanks. Chemicals released into the air from the explosions sent 15 emergency responders to the hospital with severe respiratory conditions and led to the evacuation of hundreds of surrounding households. Other petrochemical facilities faced other damages that resulted in unsafe and acute chemical releases into the air and water. What impacts did such chemical disasters have on the surrounding communities and emergency responders during Harvey's aftermath? What steps might companies have taken to prevent such chemical releases? And what chemical safety policies might have ensured that such disaster risks were mitigated? In this talk we will report on a survey of the extent of damage to Houston's oil and gas infrastructure and related chemical releases and discuss the role of federal chemical safety policy in preventing and mitigating the potential for such risks for future storms and other extreme weather and climate events. We will also discuss how these chemical disasters created acute toxics exposures on environmental justice communities already overburdened with chronic exposures from the petrochemical industry.

Responsibilities of Companies towards Employees

Directory of Open Access Journals (Sweden)

Monray Marsellus Botha

2015-07-01

Full Text Available Central to company law is the promotion of corporate governance. An important question in company law still today is in whose interest the company should be managed. Corporate governance needs to address the entire span of responsibilities to stakeholders of the company such as customers, employees, shareholders, suppliers and the community at large. The promotion of human rights in the application of company law must also take place. This is extremely important given the significant role of enterprises within the social and economic life of the nation. The interests of various stakeholder groups in the context of the corporation as a "social institution" should be enhanced and protected. Because corporations are part of society and the community, like all of us, it is required of them to be socially responsible and have greater accountability to all stakeholders of the company. Although directors must act in the best interests of shareholders collectively they must also consider the interests of other stakeholders. Sustainable relationships with all the relevant stakeholders are thus important. The advancement of social justice is thus important to corporations in that they should take note of the Constitution, labour legislation and company law legislation when social justice issues are dealt with. Employees have become very important stakeholders of companies and their needs should be taken into account in the bigger corporate governance and social responsibility framework.

Dutch chemical producers pledge emissions cuts

International Nuclear Information System (INIS)

Chynoweth, E.; Schoenmakers, J.

1993-01-01

Dutch chemical producers have negotiated a long-term agreement with government ministries to reduce emissions of a wide range of chemicals. Industry association Vereniging van de Nederlandse Chemische Industrie (VNCI; Leidschendam) says implementing the commitment will cost companies Dfl 10 billion ($5.4 billion) between 1993 and 2000. VNCI technical director Wim Quik welcomes the accord, which he describes as a management contract, saying, Rather than have legislation, there is a certain adjustment available. Peter Santen, managing director of midsized chemicals player Cindu Chemicals (Uithoorn, the Netherlands) voices some concern about the details of the accord, but adds, we are flexible in trying to agree with the contents of the covenant [it] is better than having new rules from law. The Dutch government, traditionally eager for consensus, has struck a number of such deals with Dutch industries - including packaging, metal, and tire - to reduce emissions and set up environmental management programs. The effort is based on the government's National Environmental Policy Plans - NMP and NMP Plus. Targets for emissions reduction by the chemical industry were provided by a government-funded environmental research institute

12 CFR 5.35 - Bank service companies.

Science.gov (United States)

2010-01-01

.... (d) Definitions—(1) Bank service company means a corporation or limited liability company organized... liability company. (2) Limited liability company means any non-corporate company, partnership, trust, or..., obligation, or liability of the company solely by reason of being, or acting as, a member or manager of such...