WorldWideScience

Sample records for chaleur placee dans

  1. Forced heat convection in annular spaces; Convection forcee de la chaleur dans les espaces annulaires

    Energy Technology Data Exchange (ETDEWEB)

    Pelce, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1960-02-15

    This report deals with the experimental study of forced heat convection in annular spaces through which flow of air is passing when a uniform heat flux is dissipated across the inner wall. These observations took place chiefly in the region where thermal equilibrium are not yet established. Amongst other things it became apparent that, both in the region where thermal equilibrium conditions are on the way to establishment and where they are already established, the following relationship held good: the longitudinal temperature gradient, either on the wall or in the fluid stream, is proportional to the heat flux dissipated q, and inversely proportional to the average flow rate V: dT/dx = B (q/V). From this result the next step is to express the variations of the local convection coefficient {alpha} (or of the Margoulis number M) in a relationship of the form: 1/M = {psi}(V) + F(x). If this relationship is compared with the classical empirical relationship {alpha} = KV{sup n} (where n is close to 0.8), the relationship: 1/M = {xi}V{sup 1-n} + F(x) is obtained ({xi} is a constant for a given annular space); from this it was possible to coordinate the whole set of experimental results. (author) [French] Il s'agit precisement de l'etude experimentale de la convection forcee de la chaleur dans des espaces annulaires parcourus par de l'air en ecoulement turbulent, lorsqu'on dissipe a travers la paroi interieure un flux de chaleur uniforme. Ces observations ont eu lieu principalement dans la region ou le regime thermique n'est pas encore etabli. Il est apparu, entre autre, qu'il existait, tant dans la region ou le regime thermique est en voie d'etablissement qu'en regime etabli, la relation suivante: le gradient longitudinal des temperatures, que ce soit sur la paroi ou dans l'ecoulement fluide, est proportionnel au flux de la chaleur dissipee q, et inversement proportionnel a la vitesse moyenne V de l'ecoulement: dT/dx = B (q/V). Ce resultat a pour consequence de traduire

  2. Pompes à chaleur dans l'industrie Heat Pumps in Industry

    OpenAIRE

    Benchecroun N.

    2006-01-01

    Les pompes à chaleur pourraient permettre une réduction de la consommation énergétique de l'industrie française estimée à 3,5 Mtep à l'horizon 1990 (300 000 tep en 1982). Ces installations se situeront dans les domaines du chauffage des locaux industriels, du séchage à basse température, du réchauffage de liquides et de certaines opérations de fractionnement. Pour les utilisations dans des procédés industriels les secteurs concernés sont principalement les industries agroalimentaires et, à pl...

  3. Pompes à chaleur dans l'industrie Heat Pumps in Industry

    Directory of Open Access Journals (Sweden)

    Benchecroun N.

    2006-11-01

    Full Text Available Les pompes à chaleur pourraient permettre une réduction de la consommation énergétique de l'industrie française estimée à 3,5 Mtep à l'horizon 1990 (300 000 tep en 1982. Ces installations se situeront dans les domaines du chauffage des locaux industriels, du séchage à basse température, du réchauffage de liquides et de certaines opérations de fractionnement. Pour les utilisations dans des procédés industriels les secteurs concernés sont principalement les industries agroalimentaires et, à plus long terme, celui de la chimie (y compris pétrochimie. On constate que les ventes de machines de forte puissance restent faibles (environ 500 de 1973 à 1982. Le climat général d'investissement, la nécessité d'adapter les procédés à l'utilisation d'une pompe à chaleur, et le faible niveau de température Heat pumps could be used to reduce energy consumption by French industry which may attain 3. 5 million tOE by 1990 (300 000 tOE in 1982. Such installations will be used in the fields of industrial space heating, low-temperature drying, the heating of liquids and various fractionating operations. For uses in industrial processes, the sectors involved are mainly agribusiness and food industries and, in the longer range, the chemical industry (including petrochemicals. Sales of high-powered machinery are still low (about 500 from 1973 to 1982. The general investment climate, the need to adapt processes to the use of heat pumps, and the low temperature level (< 120 °C of the heat delivered are the main factors holding back the penetration of this type of equipment in industry. The use of a nonazeotropic mixture of fluids (particularly hydrocarbons gives compression heat pumps a flexibility of adaptation which should help remove these technicalobstacles and thus make it easier for heat pumps to penetrate, especially in the chemical sector.

  4. Convective Heat Transfer in a Pneumatic Hybrid Engine Échange de chaleur convectif dans un moteur hybride pneumatique

    Directory of Open Access Journals (Sweden)

    Brejaud P.

    2011-09-01

    Full Text Available Several previous studies have proven that pneumatic hybridization of an internal combustion engine is a technically viable and cost-efficient alternative to electric hybridization. Because the heat transfer process remains a first order factor while the engine operates in a motored or pneumatic mode without combustion, an accurate instantaneous heat transfer model is required in order to predict the in-cylinder pressure. This study shows that the original Woschni model is not suitable for describing the shape of the measured instantaneous heat flux versus crank angle while the engine operates in a motored pneumatic mode, because of the extinction of tumble motion near Top Dead Center (TDC. A modified form of the Woschni model is therefore proposed here that better describes the instantaneous heat flux during compression and expansion strokes, applicable to pneumatic and motored with fuel cut-off modes. First, the new constant parameter model is identified from experimental measurements performed in various motored mode conditions. Next, the pneumatic supercharged mode without combustion (ignition not performed is investigated with the new model using the same identification values as for the motored mode. This study shows that the modified model remains fully applicable to the supercharged mode, despite of a certainly modified in-cylinder aerodynamic structure created by the opening of the charging valve under a high pressure ratio. Plusieurs études ont déjà montré que le concept d’hybride pneumatique est une alternative techniquement et économiquement viable à l’hybridation électrique. Malgré l’absence de combustion lors d’un fonctionnement en mode entraîné ou pneumatique, les échanges de chaleurs convectifs restent un facteur de premier ordre sur un bilan énergétique. Il faut donc disposer d’un modèle précis d’échange de chaleur instantané afin de prévoir la pression instantanée dans un cylindre du moteur. Cette

  5. MODÉLISATION DES FLUX DE CHALEUR GÉNÉRÉS PAR FROTTEMENT GLISSANT DANS UN CONTACT CUIVRE-ACIER TRAVERSÉ PAR UN COURANT ÉLECTRIQUE

    Directory of Open Access Journals (Sweden)

    A BOUCHOUCHA

    2001-06-01

    Full Text Available Le problème de la conduction de la chaleur dans un contact électrique glissant cuivre–acier est étudié. Le couple fonctionne dans des conditions atmosphériques et est donc refroidi par convection naturelle à travers les faces latérales. En utilisant l'équation de la chaleur, un modèle de calcul de la température interfaciale a été élaboré. A l'aide de la méthode des volumes finis, les résultats de la température en fonction de la charge normale, la vitesse de glissement et le courant électrique sont donnés. Une comparaison avec la méthode d'Archard est faite. Les résultats montrent une bonne concordance. Une discussion globale du modèle élaboré et son application dans les contacts électriques glissants a été dégagée.

  6. The direct conversion of heat into electricity in reactors; Conversion directe de la chaleur en electricite dans les piles

    Energy Technology Data Exchange (ETDEWEB)

    Devin, B; Bliaux, J; Lesueur, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The direct conversion of heat into electricity by thermionic emission in an atomic reactor has been studied with the triple aim of its utilisation: as an energy source for a space device, at the head of a conventional conversion system in power installations, or finally in association with the thermoelectric conversion in very low power installations. The laboratory experiments were mainly orientated towards the electron extraction of metals and compounds and their behaviour at high temperatures. Converters furnishing up to 50 amps at 0. 4 volts with an efficiency close to 10 p. 100 have been constructed in the laboratory; the emitters were heated by electron bombardment and were composed of tungsten covered with an uranium carbide deposit or molybdenum covered with cesium. The main aspects of the coupling between the converter and the reactor have been covered from the point of view of electronics: the influence of the mismatching of the load on the temperature of the emitter and the influence of thermal flux density on the temperature of the emitter and the stability of the converter. Converters using uranium carbide as the electron emitter have been tested in reactors. Tests have been made under dynamic conditions in order to determine the dynamic characteristics. The load matching curves have been constructed and the overall performances of several cells coupled in such a way as to form a reactor rod have been deduced. This information is fundamental to the design of a control system for a thermionic conversion reactor. The problems associated with the reliability of thermionic converters connected in series in the same reactor rod have been examined theoretically. Finally, the absorption isotherms have been drawn at the ambient temperatures for krypton and xenon on activated carbon with the aim of investigating the escape of fission products in a converter. (author) [French] La conversion directe de chaleur en electricite par emission thermionique dans une

  7. Hyperfine coupling in gadolinium-praseodymium alloys by specific heat measurements; Etude du couplage hyperfin dans les alliages gadolinium-praseodyme par mesures de chaleur specifique

    Energy Technology Data Exchange (ETDEWEB)

    Michel, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1967-12-01

    We have studied the hyperfine coupling in gadolinium-praseodymium alloys by specific heat measurements down to 0.3 K. In the first part we describe the apparatus used to perform our measurements. The second part is devoted to some theoretical considerations. We have studied in detail the case of praseodymium which is an exception in the rare earth series. The third part shows the results we have obtained. (author) [French] Nous avons etudie le couplage hyperfin d'alliages de gadolinium-praseodyme par des mesures de chaleur specifique jusqu'a 0.3 K. Dans la premiere partie de cette etude nous decrivons le dispositif experimental. La deuxieme partie est consacree a des considerations theoriques. Nous avons etudie en detail le cas du praseodyme qui est une exception dans la serie des terres rares. La troisieme partie est consacree aux resultats experimentaux. (auteur)

  8. Heat transfer by liquids in suspension in a turbulent gas stream (1960); Transfert de chaleur par liquides entraines dans un ecoulement gazeux turbulent (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Grison, E [Commissariat a l' Energie Atomique, Lab. de Physique-Chimie et basses temperatures, Grenoble (France).Centre d' Etudes Nucleaires; Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    mouillants) introduits dans un tube d'acier inoxydable de 4 mm de diametre interieur, chauffe electriquement sur 320 mm de longueur. On a fait varier le debit de gaz (Reynolds jusqu'a 50 000), le rapport debit en masse liquide, le debit en masse de gaz (jusqu'a 15), la pression (jusqu'a 10 kg/cm{sup 2}), les temperatures (jusqu'a l'ebullition) et le flux de chaleur (jusqu'a 250 W/cm{sup 2}). Deux modes de burnout ont ete observes. On donne une formule de correlation du flux de chaleur provoquant le burnout. On etablit une formule de correlation sans dimension des coefficients d'echanges locaux en utilisant l'analogie entre tranfert de masse et transfert de chaleur. (auteur)

  9. Simulation numérique du transfert de chaleur dans un moteur-fusée à propergol liquide

    Directory of Open Access Journals (Sweden)

    B. KHELIDJ

    2015-03-01

    Full Text Available Ce travail est une contribution à l'étude du refroidissement d'un moteur-fusée à propergol liquide. En effet pour protéger la paroi de la chambre propulsive, un système de refroidissement est nécessaire, car la température des gaz de combustion du propergol liquide dans la chambre de combustion, est très élevée. C'est pour montrer l'intérêt du refroidissement de la paroi de la chambre propulsive qu'une étude de simulation numérique, des phénomènes de combustion et de refroidissement dans la chambre propulsive, a été réalisée en régime permanent à l'aide du code de calcul Fluent. Les résultats de simulation, notamment ceux relatifs aux températures des parois le long de la chambre propulsive ont été confrontés à ceux trouvés dans la littérature.

  10. Heat transfer in smooth tubes, between parallel plates, along a semi-infinite plate, in annular spaces and along tube bundles for exponential distribution of the heat flux in forced, laminar or turbulent flow; Transfert de chaleur dans des tubes lisses, entre des plaques planes paralleles, le long d'une plaque plane, dans des espaces annulaires et le long de faisceaux tubulaires pour une repartition exponentielle du flux de chaleur en ecoulement force, laminaire ou turbulent

    Energy Technology Data Exchange (ETDEWEB)

    Graber, H [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-04-01

    champ de temperature ainsi que le nombre de Nusselt en ecoulement laminaire et flux de chaleur constant. En ecoulement turbulent, les lois concernant la repartition de la diffusivite de quantite de mouvement dans un tube, etablies par H. Reichardt et adaptees a l'espace annulaire et au faisceau tubulaire, permettent la determination du champ de vitesse et du coefficient de perte de charge et consequemment la solution des equations de transfert de chaleur. Les resultats du calcul numerique sont rassembles dans des tableaux et representes par des diagrammes pour un domaine etendu des differents parametres et compares avec des resultats experimentaux. Par un procede simple, on peut determiner la valeur minimale de la longueur d'etablissement du regime thermique. (auteur)

  11. Heat transfer in smooth tubes, between parallel plates, along a semi-infinite plate, in annular spaces and along tube bundles for exponential distribution of the heat flux in forced, laminar or turbulent flow; Transfert de chaleur dans des tubes lisses, entre des plaques planes paralleles, le long d'une plaque plane, dans des espaces annulaires et le long de faisceaux tubulaires pour une repartition exponentielle du flux de chaleur en ecoulement force, laminaire ou turbulent

    Energy Technology Data Exchange (ETDEWEB)

    Graber, H. [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1969-04-01

    indiquees les equations pour le calcul explicite du champ de temperature ainsi que le nombre de Nusselt en ecoulement laminaire et flux de chaleur constant. En ecoulement turbulent, les lois concernant la repartition de la diffusivite de quantite de mouvement dans un tube, etablies par H. Reichardt et adaptees a l'espace annulaire et au faisceau tubulaire, permettent la determination du champ de vitesse et du coefficient de perte de charge et consequemment la solution des equations de transfert de chaleur. Les resultats du calcul numerique sont rassembles dans des tableaux et representes par des diagrammes pour un domaine etendu des differents parametres et compares avec des resultats experimentaux. Par un procede simple, on peut determiner la valeur minimale de la longueur d'etablissement du regime thermique. (auteur)

  12. Pompe de chaleur fonctionnant avec un mélange de fluides Heat Pump Operating with a Fluid Mixture

    Directory of Open Access Journals (Sweden)

    Vidal J.

    2006-11-01

    Full Text Available Lorsqu'une pompe de chaleur échange de la chaleur avec des fluides extérieurs, dont la température évolue au cours de l'échange, il est possible d'augmenter le coefficient de performance en utilisant comme fluide de travail un mélange non-azéotropique qui se vaporise et se condense suivant une évolution de température parallèle à celle du fluide extérieur avec lequel s'effectue cet échange. L'utilisation de mélanges dans les pompes de chaleur a été étudiée, d'une part, au moyen de modèles de simulation sur ordinateur et, d'autre part, au moyen d'essais expérimentaux. Différentes applications ont été examinées à la fois dans le domaine du chauffage résidentiel et dans le domaine industriel. Whenever heat is recovered and delivered, the coefficient of performance of a heat pump can be increased by using a fluid mixture selected to have a temperature variation, during the vaporization and condensation stages, parallel to that of the outside fluid with which the heat exchange takes place. Such a solution was investigated both theoretically and experimentally. It has been shown that significant savings can be expected, ranging up to 50% of the energy consumption of conventional heat pumps in some cases. Various applications for home and industrial heating have been examined, and the economic prospects have been found to be satisfactory. Further work is needed to develop such heat pumps on a commercial basis.

  13. Improvement of heat transfer to gases by mean of electric fields (1962); Etude de l'amelioration des echanges de chaleur dans les gaz au moyen de champs electriques (1962)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1962-07-01

    The effects of electric fields on heat transfer to the following gases: air, argon, nitrogen, carbon dioxyde, helium, hydrogen, were studied in an annular channel, the inner part of which is the heating element. Experiments were made both in free convection and forced convection, the latter case with and without an external source of ionisation. Two causes of improvement of heat transfer were found: electro-convection and ionic convection; the influence of various parameters (electric fields, current of ionisation, temperatures, pressures, flow rate, etc...) is also investigated. Increasing of exchanged power was measured: in free convection this increasing reached 400 per cent and, in forced convection, it was found to be mainly dependent on stream velocity, decreasing from 300 per cent at Re = 6000 to few per cent for Re {>=} 30000 for a given gas pressure. Experiments in pile have shown that the use of an external source of ionisation allowed to obtain the same order of improvement as above but with a voltage much lower. This fact would make easier the use of this process of heat transfer in a channel of a reactor. (authors) [French] On a etudie l'action du champ electrique sur les echanges de chaleur dans les gaz suivants: air, argon, azote, anhydride carbonique, helium, hydrogene, avec un element chauffant cylindrique dans un canal concentrique. Des experiences ont ete effectuees en convection libre et en convection forcee en l'absence et en presence d'une source exterieure d'ionisation. On a distingue deux sortes de mecanismes d'accroissement des echanges, l'un d'electroconvection proprement dite et l'autre de convection ionique, et on precise l'influence des divers parametres (champ electrique, courant d'ionisation, temperature, pression, debit, etc...). On a pu chiffrer les ordres de grandeur des accroissements d'echanges observes qui, en convection libre, atteignent 300 a 400 pour cent et, en convection forcee, dependent beaucoup de la vitesse d

  14. ETUDE NUMERIQUE DE L’ECOULEMENT INSTATIONNAIRE ET DU TRANSFERT DE CHALEUR AUTOUR D’UNE CONDUITE DE SECTION CARREE DANS UN CANAL

    Directory of Open Access Journals (Sweden)

    A KORICHI

    2007-06-01

    Full Text Available L’objet de cette publication est de présenter une étude de la caractéristique courant-tension d’une cellule solaire organique à base d’un composite poly (2-methoxy-5-(2’- ethylhexyloxy-1, 4-phenylenevinylene (MEH-PPV avec [6, 6]-phenyl C60 butyric acid methyl ester (PCBM en fonction de l’intensité d’illumination. La variation du photocourant, du facteur de forme, de la tension en circuit ouvert, du courant de saturation ainsi que de la puissance maximale de sortie sous différentes intensités lumineuses (100 mW/cm2, 60 mW/cm2 et 24 mW/cm2, sont examinés expérimentalement. Il est observé que pour des valeurs données de la résistance série et/ou la résistance shunt, le facteur de forme est déterminé par le courant inverse de saturation et le facteur d’idéalité de la cellule solaire. Les effets de ces composants, dans l’ensemble de performance photovoltaïque, sont discutés.

  15. Experimental study of heat transfer for parallel flow in tube bundles with constant heat flux and for medium Prandtl numbers; Etude experimentale du transfert de chaleur dans des faisceaux tubulaires en ecoulement parallele pour une densite de flux thermique constante dans le domaine des nombres de Prandtl moyens

    Energy Technology Data Exchange (ETDEWEB)

    Rieger, M [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1968-06-01

    The heat transfer parameters were determined experimentally in electrically heated tube bundles for turbulent flow parallel to the axis. The tubes were arranged in a pattern of equilateral triangles. The ratios of the distance between the axes of the tubes to their external diameter were 1.60 and 1.25 in the two test sections studied. The experiments were carried out with distilled water and with a mixture of 60 per cent ethylene glycol and 40 per cent water. The values obtained for the Prandtl numbers in this way fell within the range from 2.3 to 18. The Reynolds numbers were varied between 10{sup 4} and 2.10{sup 5}. The relation between the mean heat transfer coefficients and the friction factor in the tube bundles was found from the experiments as: Nu = [Re Pr {zeta}/8]/[1+{radical}({zeta}/8) 8.8 (Pr-1.3) Pr{sup -0.22}]. The experimentally determined mean Nusselt numbers were also given by the following function: Nu = (0.0122 + 0.00245 p/d) Re{sup 0.86} Pr{sup 0.4}, with a maximum deviation of {+-}4 per cent. For certain local Nusselt numbers, deviations of up to 20 per cent with respect to the relations given were observed. (author) [French] Dans des faisceaux tubulaires a chauffage electrique parcourus par un ecoulement turbulent parallele a l'axe, on a determine experimentalement les parametres du transfert de chaleur. Les centres des sections droites des tubes etaient des sommets de triangles equilateraux. Les rapports de la distance a l'axe des tubes et leur diametre exterieur dans les deux veines de mesure etudiees etaient de 1.60 et 1.25. Des essais furent effectues avec de l'eau distillee ainsi qu'avec un melange de 60 pour cent de glycol ethylenique et 40 pour cent d'eau. Les valeurs des nombres de Prandtl obtenues ainsi etaient situees entre 2.3 a 18. On a fait varier les nombres de Reynolds entre 10{sup 4} et 2.10{sup 5}. La relation entre les nombres caracteristiques de transfert de chaleur moyens et la perte de charge dans les faisceaux tabulaires

  16. ATTACHMENT PLACE: STUDI FENOMENOLOGI SPECIAL PLACE ANAK USIA DINI DI PAUD ISLAM DAN TK ISLAM DI KABUPATEN MALANG

    Directory of Open Access Journals (Sweden)

    Akhmad Mukhlis

    2016-05-01

    Full Text Available Penelitian ini bertujuan untuk mengetahui kelekatan tempat (attachment place pada anak usia dini. Berbeda dengan penelitian-penelitian sebelumnya, penelitian ini memfokuskan kajiannya pada tempat-tempat yang dianggap spesial (special place oleh anak di lingkungan rumah mereka. Metodologi fenomenologi dipilih untuk mengeksplorasi tujuan penelitian dalam dua tahap. Tahap pertama dilkaukan di sekolah dengan mendiskusikan buku dengan 13 peserta didik. Tiga anak yang paling aktif dan mampu berkomunikasi dengan baik diminta untuk menjadi partisipan pada tahap kedua yaitu kunjungan rumah. Dua tahapan penggalian data menemukan bahwa anak-anak memiliki banyak tempat yang dianggap spesial. Keberadaan tempat-tempat tersebut biasa digunakan untuk bersembunyi, meredakan emosi, bermain dan mengembangkan rasa otonomi diri.

  17. Experimental study of heat exchange coefficients, critical heat flux and charge losses, using water-steam mixtures in turbulent flow in a vertical tube; Etude experimentale des coefficients d'echanges thermiques, des flux de chaleur critiques et des pertes de charge avec des melanges eau-vapeur en ecoulement turbulent dans un tube vertical

    Energy Technology Data Exchange (ETDEWEB)

    Perroud, P; De La Harpe, A; Rebiere, J [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1960-12-15

    Two stainless steel tubes were used (with diameters of 5 and 10 mm, lengths 400 and 600 mm respectively), heated electrically (50 Hz). The mixture flows from top to bottom. The work was carried out mainly on mixtures of high concentration (x > 0.1), at pressures between 50 and 60 kg/cm{sup 2}, flowing as a liquid film on the walls of the tube with droplets suspended in the central current of steam. By analysis of the heat transfer laws the exchange mechanisms were established, and the conditions under which the critical heat flux may be exceeded without danger of actual burnout were determined. In this way high output concentrations (x{sub s} > 0.9) may be obtained. An attempt has been made to find out to what extent existing correlation formulae can be used to account for the phenomena observed. It is shown that those dealing with exchange coefficients can only be applied in a first approximation in cases where exchange by convection is preponderant, and only below the critical flux. The formulae proposed by WAPD and CISE do not give a satisfactory estimation of the critical heat flux, and the essential reasons for this inadequacy are explained. Lastly, the Martinelli and Nelson method may be used to an approximation of 30 per cent for the calculation of charge losses. (author) [French] On a utilise deux tubes en acier inox (avec des diametres de 5 et 10 mm, et des longueurs respectives 400 et 600 mm) chauffes electriquement (50 Hz). Le melange s'ecoule de haut en bas. Les etudes ont porte plus specialement sur des melanges de titres eleves (x > 0,1) a des pressions comprises entre 60 et 90 kg/cm{sup 2} dont l'ecoulement se fait avec film liquide annulaire et gouttelettes en suspension dans le coeur de vapeur. Par l'analyse des lois de transfert de chaleur, on a precise les mecanismes d'echanges et l'on a d'autre part determine dans quelles conditions le flux de chaleur critique peut etre depasse sans danger de 'burnout' proprement dit. On peut ainsi obtenir des

  18. Valorisation de chaleur à bas niveau thermique Upgrading Low-Thermal-Level Heat

    OpenAIRE

    Cohen G.; Rojey A.

    2006-01-01

    La mise en oeuvre à la fois de cycles thermodynamiques et de fluides adaptés permet d'élargir considérablement les possibilités de récupération et de valorisation de la chaleur à bas niveau contenue dans les rejets thermiques industriels, l'eau géothermale, le rayonnement solaire ou le milieu environnant. Ceci permettra une meilleure préservation des ressources énergétiques dans les principaux secteurs consommateurs d'énergie : résidentiel, tertiaire et industriel. On décrit les possibilités ...

  19. La place du nom propre dans les dictionnaires collaboratifs : le cas de La Parlure

    Directory of Open Access Journals (Sweden)

    Dolar Kaja

    2014-07-01

    Full Text Available Suite à l’émergence des nouvelles technologies et des possibilités qu’elles offrent, nous assistons à la floraison des dictionnaires dits collaboratifs. A la différence des dictionnaires numériques/informatisés, qui sont en réalité des dictionnaires académiques mis en ligne, la particularité des dictionnaires collaboratifs réside dans le fait que leur rédaction soit proposée au grand public ; elle se fait par les internautes, sans intervention de linguistes ou spécialistes de la lexicographie. Avec leur apparition, la lexicographie a sans doute pris un nouveau tournant en mettant en avant une tendance actuelle, la lexicographie participative. Dans notre étude, nous nous intéressons en premier lieu à la forme particulière de ces dictionnaires ainsi qu’à leur fonctionnement général. A ce propos, nous nous penchons plus précisément sur le dictionnaire collaboratif français La Parlure pour analyser son fonctionnement ainsi que certaines des particularités qui le caractérisent et le distinguent des autres dictionnaires de ce genre. Dans un deuxième temps, nous nous interrogeons sur la place du nom propre dans ces dictionnaires collaboratifs. Nous analysons quelques entrées relevant du nom propre dans le dictionnaire collaboratif La Parlure pour savoir comment le nom propre s’insère dans la nomenclature ainsi que dans l’ensemble du dictionnaire. On retiendra en somme que dans La Parlure le nom propre se trouve au sein de divers types d’entrées, soit dans les noms propres à proprement parler, soit dans les noms et locutions métaphoriques soit dans les néologismes créés à partir de noms propres. En conclusion, nous pouvons dire que non seulement la place du nom propre dans les dictionnaires collaboratifs est significative, mais également que les noms propres se trouvent au cœur de l’innovation linguistique actuelle en langue française.

  20. La place des enfants dans l'économie nationale | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2 févr. 2011 ... La place des enfants dans l'économie nationale .... en œuvre « plusieurs politiques de protection sociale » destinées à mettre ces groupes à ... health service provision and the monitoring of pregnant women, new mothers, chi.

  1. Características das ilhas de calor em cidades de porte médio: exemplos de Presidente Prudente (Brasil e Rennes (França Caractéristiques des îlots de chaleur urbains dans des villes de taille moyenne: exemples de Presidente Prudente (Brésil et Rennes (France

    Directory of Open Access Journals (Sweden)

    Hervé Quenol

    2009-10-01

    Full Text Available Este trabalho teve como objetivo analisar e comparar as características térmicas do clima urbano em duas cidades de médio porte: Rennes (França e Presidente Prudente (Brasil, por meio de registros da temperatura do ar (pontos fixos e medidas itinerantes e dados térmicos de superfície obtidos pelo tratamento de imagens do satélite Landsat 7. Verificou-se o aumento das temperaturas, ligeiramente maiores em Rennes, do que em Presidente Prudente e a geração de ilhas de calor urbanas (ICU, decorrentes do processo de urbanização nas duas cidades.Cet article a pour objectif d’étudier les caractéristiques du climat dans deux villes moyennes (Rennes en France et Presidente Prudente au Brésil à partir de trois types de mesures de températures : des mesures réalisées dans des stations fixes, des mesures itinérantes et des données de températures de surface obtenues à partir d’images du satellite Landsat 7. On montre que l’augmentation des températures est légèrement plus importante à Rennes qu’à Presidente Prudente ainsi que le développement d’îlots de chaleur urbains (ICU résultant de l’extension de la tache urbaine des deux agglomérations.This paper aims to analyze and compare thermal characteristics of urban climate of two middle size cities: Rennes (France and Presidente Prudente (Brazil, by registering air temperature  (network pointes and mobile transect and surface data obtained by using Landsat7 satellite thermal images. Results shows that temperature grows faster in Rennes than Presidente Prudente and urban heat island generation (UHI by different cities urbanization processes.

  2. Formation sécurité : places disponibles dans les sessions de juin

    CERN Multimedia

    DGS Unit

    2010-01-01

    Il reste des places dans les formations sécurité suivantes. Pour les mises à jour et les inscriptions, veuillez vous reportez au catalogue des formations sécurité. Safety in Cryogenics level 1, 14 juin, en anglais, 3 heures, 9h00 – 12h00 (5 places) Radiological Protection, 18 juin, en anglais, 4 heures, 13h30 – 17h30 (15 places) Radiological Protection, 22 juin, en anglais, 4 heures, 08h30 – 12h30 (15 places) Sécurité Radiologique, 22 juin, en français, 4 heures, 13h30 – 17h30 (15 places) Conduite de chariots élévateurs, 24-25 juin, en français, 2 jours, 8h00 – 17h30 (3 places

  3. Influence of the heat flux and of the gas on heat transfer and friction coefficients in a smooth cylindrical tube; Influence du flux de chaleur et de la nature du gaz sur les coefficients d'echange et le frottement dans un tube cylindrique lisse

    Energy Technology Data Exchange (ETDEWEB)

    Delpont, J P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-12-15

    paroi peut atteindre 430 deg C, le flux de chaleur atteignant 16 watts/cm{sup 2}. Les nombres de Reynolds Re{sub m}, de Margoulis M{sub m} et le coefficient de frottement f sont calcules en evaluant les proprietes physiques du gaz a la temperature moyenne T{sub m}. Pour un nombre de Reynolds Re{sub m} donne, on observe une diminution de M{sub m} et de f lorsque le flux de chaleur augmente: elle peut atteindre 10 pour cent dans les essais presentes. Une formulation est proposee qui permet de traduire cet effet au moyen d'un parametre de flux (T{sub m} - T{sub m}) / T{sub p} utilise comme terme correctif (T{sub p} = temperature de la paroi). Les formules de correlation proposees sont: M{sub m} = 0,0168 Re{sub m}{sup -0,18} P{sub m}{sup -0,6} (1 - 0,4 [(T{sub p} - T{sub m}) / T{sub p}]) pour l'air f = f{sub 0} (1 - 0,25 [(T{sub p} - T{sub m}) / T{sub p}]) pour l'air M{sub m} 0,0171 Re{sub m}{sup -0,18} P{sub m}{sup -0,6} (1 - 0,2 [(T{sub p} - T{sub m}) / T{sub p}]) pour le CO{sub 2} f = f{sub 0} (1 - 0,20 [(T{sub p} - T{sub m}) / T{sub p}]) pour le gaz carbonique avec f{sub 0} coefficient de frottement en ecoulement isotherme. (auteur)

  4. Refleksi dan Naratif Self and Others: Kajian Sense of Place Anak Terhadap Lingkungan Tempat Tinggal Melalui Auto-Etnografi

    Directory of Open Access Journals (Sweden)

    Susinety Prakoso

    2015-09-01

    Full Text Available Penelitian auto-etnografi merupakan penelitian yang bertujuan untuk memahami pengalaman budaya tertentu melalui naratif diri dan pengalaman personal. Dalam tulisan ini, penelitian auto-etnografi dipilih sebagai pendekatan alternatif untuk memahami konsep sense of place pada anak-anak. Tulisan auto-etnografi ini merupakan bentuk deskripsi narasi diri yang menempatkan diri dalam konteks sosial tertentu. Tulisan ini berangkat dari refleksi diri (self melalui suara (voice seorang perempuan mengenai bagaimana sense of place masa kanak-kanaknya terhadap lingkungan tempat tinggal membentuk pandangan dan sikapnya sebagai diri (self seorang ibu terhadap sense of place kedua orang anak-anaknya (others pada lingkungan tempat tinggal. Metode pengumpulan data dilakukan dengan mengandalkan ingatan lingkungan tempat tinggal masa kecil, ingatan masa sekarang dan diperkuat dengan data wawancara dengan keluarga dan dokumentasi pribadi. Aspek place dalam penelitian ini berada di ruang dan waktu masa kini dan di ruang dan waktu masa lalu. Hasil penelitian menunjukkan sense of place anak-anaknya (others, bukan karena persepsi negatif mereka terhadap lingkungan tempat tinggal, tetapi karena kehidupan keseharian anak-anak (others yang telah terperangkap dalam situasi institusionalisasi dan familialisasi yang diciptakan oleh diri sendiri (self. Bila direfleksikan, bukan karena perubahan jaman atau perbedaan gaya hidup maupuun budaya bermain, tapi lebih pada bagaimana pengalaman diri yang dipengaruhi oleh masa lalu, mempengaruhi bagaimana diri bersikap dan berpandangan pada kehidupan anak-anaknya, termasuk pada sense of place anak-anaknya.Kata kunci. Auto-etnografi, anak, ibu, sense of place, lingkungan tempat tinggal. Auto-ethnographic studies are aimed at understanding particular cultural experiences through self-narratives and personal experiences. In this paper, auto-ethnography was chosen as an alternative approach to understanding the concept of children

  5. PASAR DI SUDUT TIGA KORIDOR LAMA SEMARANG SEBAGAI PEMBENTUK PLACE DAN LINGKAGE EKONOMI

    Directory of Open Access Journals (Sweden)

    Siti Rukayah

    2017-05-01

    Full Text Available Semarang city has golden triangle corridor as a commercial corridor in the present day. But, in the past, the city had three corridors (bigger than now. There were Bodjong street (now known as Pemuda street, part of Groote Postweg 1809-1811,  Mataram  street (now Mt. Haryono road - the road that connects the old Semarang port to the Mataram kingdom in inland Java and Veteran road (the road linking the western side of the city to the street Mataram, to avoid the downtown area which was a swamp area. There were traditional markets in each part of the node of triangle corridors (Johar, Randu Sari and Peterongan that still exist until now. This study aims to reveal the organization of city structure at that time. By using the historical method and a naturalistic approach were found that the formation of triangle corridor has a function as economic lingkage and economics place, connecting and attracting each other. In the city development,  these markets become magnet and strategic node as  a place for economic activity. It was formed by the existence of  markets, functioning as the magnet for circulations dan be a place for the community. The existence of traditional villages along the corridors which have toponyms based on community economic activity at that time, became evident that the economic linkage has been formed in the past. This phenomenon has become a new knowledge that can be applied to the government for creating the concept of a city walk/ shopping belt corridor based on local wisdom of the urban planning in the past. Recommendations of this study is to preserve and develop the urban design in the past, so it can be utilized in the present situation.

  6. Comment scolariser les enfants Roms? Les enfants Roms dans les dispositifs mis en place à Bordeaux Métropole.

    OpenAIRE

    Øhlund, Ida

    2016-01-01

    Dans ce mémoire, je m intéresse à la scolarisation des enfants Roms en France. Je présente la place des enfants Roms dans la scolarisation en Europe et en France. Je discute les efforts qu on fait en France pour scolariser ces enfants, et je prends comme exemple les mesures d intégration prises par les autorités de Bordeaux Métropole en expliquant les rôles des différents acteurs locaux. Dans la première partie, j essaye de présenter le groupe minoritaire européen appelé « Rom ». J aborde l h...

  7. Electronic specific heat of transition metal carbides; Chaleur specifique electronique de carbures de metaux de transition

    Energy Technology Data Exchange (ETDEWEB)

    Conte, R [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1964-07-15

    The experimental results that make it possible to define the band structure of transition metal carbides having an NaCI structure are still very few. We have measured the electronic specific heat of some of these carbides of varying electronic concentration (TiC, either stoichiometric or non-stoichiometric, TaC and mixed (Ti, Ta) - C). We give the main characteristics (metallography, resistivity, X-rays) of our samples and we describe the low temperature specific heat apparatus which has been built. In one of these we use helium as the exchange gas. The other is set up with a mechanical contact. The two use a germanium probe for thermometer. The measurement of the temperature using this probe is described, as well as the various measurement devices. The results are presented in the form of a rigid band model and show that the density of the states at the Fermi level has a minimum in the neighbourhood of the group IV carbides. (author) [French] Les donnees experimentales permettant de preciser la structure de bandes des carbures de metaux de transition de structure NaCI sont encore peu.nombreuses. Nous avons mesure la chaleur specifique electronique de certains de ces carbures, de differentes concentrations electroniques (TiC stoechiometrique ou non, TaC et mixtes (Ti, Ta) - C). Nous donnons les principales caracteristiques (metallographie, resistivite, rayon X), de nos echantillons, et nous decrivons l'appareillage de chaleur specifique a basse temperature realise. Dans l'un nous utilisons l'helium comme gaz d'echange. L'autre est monte avec un contact mecanique. Les deux utilisent une sonde au germanium comme thermometre. La mesure de la resistance de cette sonde est decrite, ainsi que les differents montages de mesure. Les resultats, presentes dans un modele de bande rigide, font apparaitre que la densite des etats au niveau de Fermi presente un minimum au voisinage des carbures du groupe IV. (auteur)

  8. PLACE DU MEDECIN GENERALISTE, EN FRANCE, DANS LE PARCOURS DE SOINS DES MALADIES CHRONIQUES

    Directory of Open Access Journals (Sweden)

    Claude JAFFIOL

    2017-05-01

    Full Text Available Les maladies chroniques sont la première cause de décès et la source principale des dépenses de santé. Leur dépistage précoce devrait permettre de limiter leur gravité évolutive et de réduire sensiblement leur coût.Le médecin généraliste est le mieux placé pour assurer la prise en charge de ces affections tout au long du parcours de soins. Mais plusieurs obstacles limitent cette évidence : la diminution régulière du nombre de praticiens de premier recours affectant de nombreux bassins de santé en France,  mais aussi, pour ceux en activité, des difficultés tenant au manque de formation, de temps médical et à une rémunération inadaptée à la prise en charge de ces pathologies. De ce fait, la prévention des maladies chroniques est insuffisante, leur diagnostic souvent trop tardif,  tandis que leur suivi se heurte au défaut d’observance du traitement par le patient et, plus rarement, à l’inertie thérapeutique médicale.   C'est pourquoi, il faut revoir fondamentalement la prise en charge des patients  pour les rendre autonomes dans la gestion de leur affection tout en donnant au praticien les moyens de gérer et de coordonner efficacement les diverses étapes du parcours de soin. Cela exige de changer les mentalités de part et d'autre, mais aussi de donner au médecin les moyens financiers lui permettant de consacrer à ses patients plus de temps, au centre d'une nouvelle organisation interprofessionnelle. La prévention et l’éducation thérapeutique du patient (ETP sont les clés de cette révolution thérapeutique. Il convient, en outre,  de revoir la formation des étudiants en privilégiant les sciences humaines et les stages chez le praticien, en favorisant  un accès accru au numérique et en assurant la reconnaissance, par des mesures concrètes, de la place du médecin généraliste dans un nouveau parcours de soins où il doit avoir un rôle central de coordinateur.

  9. La place de la biodiversité dans les documents de planification urbaine en France

    Directory of Open Access Journals (Sweden)

    Fernanda Moscarelli

    2016-12-01

    Full Text Available La prise de conscience par les acteurs sociaux et politiques des enjeux environnementaux et de la nécessité de conservation de la biodiversité va conduire à de nouvelles politiques et à l’utilisation d’outils de planification territoriale novateurs comme le Schéma de Cohérence Territorial (SCoT. Le SCoT est l’instrument central de l’aménagement communautaire urbain français, qui associe le rôle d’assemblage de plusieurs politiques sectorielles et de coordination multi-scalaire aux objectifs de conception de villes durables. Il est donc souhaité que les SCoTs soient capables: (a d’améliorer les procédures d’aménagement par l’instauration de territoires de planification mieux adaptés aux enjeux, (b d’élargir le dialogue entre acteurs et société civile et (c d’agir pour la “soutenabilité” des villes. Nous nous interrogeons ici sur la prise en compte de la biodiversité dans les stratégies et prescriptions mises en place par les SCoTs de la Communauté d’Agglomération de Montpellier et de la Région Urbaine Grenobloise. A partir d’une analyse empirique, nous prétendons identifier les stratégies prescrites et les limites de ces documents d’urbanisme en ce qui concerne ces stratégies et leur application, la pertinence des périmètres de projet et d’action.

  10. Valorisation de chaleur à bas niveau thermique Upgrading Low-Thermal-Level Heat

    Directory of Open Access Journals (Sweden)

    Cohen G.

    2006-11-01

    Full Text Available La mise en oeuvre à la fois de cycles thermodynamiques et de fluides adaptés permet d'élargir considérablement les possibilités de récupération et de valorisation de la chaleur à bas niveau contenue dans les rejets thermiques industriels, l'eau géothermale, le rayonnement solaire ou le milieu environnant. Ceci permettra une meilleure préservation des ressources énergétiques dans les principaux secteurs consommateurs d'énergie : résidentiel, tertiaire et industriel. On décrit les possibilités que présentent : - Les cycles thermodynamiques directs (pompes de chaleur à compression ou à absorption dans le domaine du chauffage résidentiel et tertiaire où elles sont déjà bien implantées et dont les applications commencent à pénétrer le secteur industriel. - Les cycles thermodynamiques inverses (thermotransformateurs et cycles moteurs à fluide organique pour lesquels les progrès techniques accomplis et l'accroissement du prix de l'énergie devraient permettre d'en assurer la diffusion progressive dans le secteur industriel. The implementation of both thermodynamic cycles and suitable fluids makes for a considerable widening of the capacity to recover and upgrade the low-level heat contained in industrial heat wastes, geothermal water, solar radiation or the surrounding environment. This will make for better conservation of energy resources in the leading sectors of energy consumption, i. e. residential, tertiary and industrial. This article describes these possibilities in the form of: (a Direct thermodynamic cycles (compression or absorption heat pumps in the field of home and tertiary heating where they have already obtained a solid foothold and for which applications are beginning te penetrate into the industrial sector. (b Reverse thermodynamic cycles (heat transformers and organic-fluid motor cycles for which the technical advances made and the increase in energy prices should enable them to spread progressively

  11. Experimental study of the heat transfer and of pressure losses with gaseous hydrogen in turbulent flow in a tube and in an annular space; Etude experimentale du transfert de chaleur et des pertes de charge avec l'hydrogene gazeux en ecoulement turbulent dans un tube et dans un espace annulaire

    Energy Technology Data Exchange (ETDEWEB)

    La Harpe, A de; Perroud, P [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

    1961-07-01

    Three different dispositions were used: a tube (diameter 4 mm, length 320 mm) and two annular spaces (3 x 8.8 and 5 x 8.8 mm, length 260 mm). The tubes are of stainless steel and are heated by a 50 cycle alternating current. The Reynolds number varied from 4000 to 120000, the wall temperature up to 700 deg. C, and the exit-temperature up to 500 deg. C. Heat flows of up to 170 W/cm{sup 2} were observed. All the experimental results can be summed up by a correlation expression of the Colburn type Nu = 0,020 Re{sup 0.8} Pr{sup 0.4}, as long as the physical properties of the gas are expressed at the film temperature t{sub 0.3} = t{sub m} + 0.3 (t{sub p} - t{sub m}). For each particular disposition, a more exact correlation has however been obtained. A variation of the film temperature index with the ratio of the heated to the wetted perimeters has been observed. The pressure loss coefficients measured are lightly higher than those calculated using von Karman formula for smooth tubes. (author) [French] On a utilise trois geometries differentes: tube (diametre 4 mm, longueur 320 mm) et deux espaces annulaires (3 x 8,8 et 5 x 8,8 mm, longueur 260 mm). Les tubes sont en acier inoxydable et chauffes en courant alternatif 50 Hz. Le nombre de Reynolds a varie de 4000 a 120000, la temperature de paroi jusqu'a 700 deg. C et la temperature de sortie de l'hydrogene jusqu'a 500 deg. C. On a observe des flux de chaleur atteignant 170 W/cm{sup 2}. L'ensemble des resultats experimentaux peut etre resume par la formule de correlation, type Colburn, Nu = 0,020 Re{sup 0,8} Pr{sup 0,4} a condition d'evaluer les proprietes physiques du gaz a la temperature de film t{sub 0.3} = t{sub m} + 0.3 (t{sub p} - t{sub m}). Pour chaque geometrie particuliere, une correlation plus precise a cependant pu etre obtenue. On note une variation de l'indice de la temperature de film avec le rapport du perimetre chauffant au perimetre mouille. Les coefficients de perte de charge mesures sont legerement plus

  12. Mettre en place des solutions durables pour réduire la faim dans le ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    16 déc. 2016 ... ... augmenter les revenus des familles d'agriculteurs et améliorer la nutrition dans l'ensemble des pays du Sud. ... mondiaux en sécurité alimentaire et en nutrition et des centaines de milliers d'agriculteurs, ... Articles connexes ...

  13. Turbulent diffusion downstream of a linear heat source installed in a turbulent boundary layer; Diffusion turbulente en aval d`une source lineaire de chaleur placee dans une couche limite turbulente

    Energy Technology Data Exchange (ETDEWEB)

    El Kabiri, M.; Paranthoen, P.; Rosset, L.; Lecordier, J.C. [Rouen Univ., 76 - Mont-Saint-Aignan (France)

    1997-12-31

    An experimental study of heat transport downstream of a linear source installed in a turbulent boundary layer is performed. Second and third order momenta of velocity and temperature fields are presented and compared to gradient-type modeling. (J.S.) 7 refs.

  14. Echos sur la place de la géographie dans les sciences sociales indiennes

    Directory of Open Access Journals (Sweden)

    Sébastien Oliveau

    2006-03-01

    Full Text Available Ce papier est un résumé de différents articles publiés dans la plus importante revue indienne de sciences sociales, EPW (Economic and Political Weekly. Il fait écho à ma propre expérience de géographe en Inde, qui se solde aujourd’hui par des collaborations avec des démographes et des économistes… L’article qui a démarré la discussion est celui d’Anu Kapur, géographe indienne, intitulé « Géographie en Inde : une science sociale qui se languit ». Anu Kapur se propose dans cet article de pas...

  15. Transferts de masse et de chaleur entre une gouttelette d'un liquide hygroscopique et l'air humide

    OpenAIRE

    Pelletret , R.; Sylvain , J.-D.

    1985-01-01

    Cette étude s'insère dans le cadre des interactions entre un liquide hygroscopique et l'air humide. Par définition, une goutte d'un tel liquide capte les molécules de vapeur d'eau et s'échauffe du fait de la chaleur libérée, à sa surface, par condensation. Des expérimentations, mesurant en régime transitoire la température de gouttelettes de chlorure de lithium et de soude, ont permis de valider, pour nos applications, la corrélation de Ranz et Marshall. Un modèle aux différences finies, de l...

  16. La place de la psychiatrie dans les Archives d’anthropologie criminelle

    Directory of Open Access Journals (Sweden)

    Jean-Christophe Coffin

    2006-01-01

    Full Text Available En 1886, lors de la parution du premier numéro des Archives d’anthropologie criminelle, la psychiatrie est déjà organisée en tant que discipline et constitue, à ce titre, une spécialité médicale. Une chaire de pathologie mentale et des maladies de l’encéphale a été fondée en 1879 à la faculté de médecine de Paris et les étudiants en médecine apprennent leur spécialité dans le cadre de l’asile pour aliénés, au chevet du malade. Depuis 1852, les ali��nistes (tel est le nom courant à l’époque, ce...

  17. Quelle place pour le citoyen dans les processus de qualification environnementale des entreprises ?

    Directory of Open Access Journals (Sweden)

    Nathalie Semal

    2006-01-01

    Full Text Available Le développement durable invite à intégrer aux modèles de raisonnement et d’action économiques la négociation entre parties intéressées et compétentes. Cette approche trouve sa traduction dans le champ économique sous la forme de la « théorie des parties prenantes », cristallisé notamment dans des outils comme la norme ISO 14001. Mais les modalités pratiques de sa mise en oeuvre ne permettent pas une intégration équilibrée des différents points de vue en présence. Le dialogue des parties prenantes qui vise à construire la « qualité environnementale » des entreprises se négocie essentiellement au sein de l’espace marchand. Le potentiel d’intégration du droit de négociation des parties prenantes paraît faible en l’absence d’un dispositif de veille citoyenne de cette qualité environnementale.Sustainable development aims to integrate stakeholder negotiation into economical reasoning and acting models. The stakeholder theory translates this approach in the economics field. Some tools like ISO 14001 standard crystallise this theory. But the practical ways of its implementation do not allow a balanced integration of the hole range of stakeholders views. Stakeholder dialog, which aims to build a consensus about enterprises “environmental quality”, is mostly negotiated inside the economic space. ISO 14001 standardisation system is not likely to allow stakeholder negotiation rights integration while citizens do not organise an environmental quality watching over network.

  18. La place de la relation soignant-soigné dans l'approche de soins transculturelle: travail de Bachelor

    OpenAIRE

    De Beul, Nathalie; Martinez, Cristian; Toppo, Marie-Laure; Diby, Marc

    2014-01-01

    Introduction: En Suisse, en lien avec le phénomène migratoire, la prise en soin de patients de culture différente se révèle être fréquente. L’approche des soins transculturelle est déjà abordée par d’autres disciplines. Objectif: L’objectif de cette revue de littérature est de définir quelle est la place de la relation soignant-soigné dans l’approche de soins transculturelle. Méthode: Revue de littérature utilisant les bases de données Pubmed, Cinahl, Psychinfo entre 2000 et 2014. Sur 7'761 a...

  19. Les infections nosocomiales néonatales: quand l'infirmière a une place centrale dans la prévention

    OpenAIRE

    Hayoz, Mathilde; Moser, Olivia; Thévoz, Anne-Laure

    2015-01-01

    L’objectif de cette revue de littérature est de répondre au questionnement clinique suivant : quelles sont les mesures de prévention que l’infirmière peut mettre en place afin de diminuer le taux d’infections nosocomiales lors de procédures invasives auprès des nouveau-nés dans un service de soins intensifs de néonatologie ?

  20. Les méthodesthermiques de production des hydrocarbures. Chapitre 1 : transfert de chaleur et de masse Thermal Methods of Hydrocarbon Production. Chapter 1 : Heat and Mass Transfer

    Directory of Open Access Journals (Sweden)

    Bia P.

    2006-11-01

    Full Text Available Après un rappel général sur le transfert de chaleur et de masse ainsi que sur les lois de conservation dans les milieux continus, on traite de l'adaptation de ces lois au cas des milieux poreux. On donne ensuite des informations quantitatives sur les grandeurs physiques mises en jeu par les phénomènes de transfert en milieu poreux. After making a general review of heat and mass transfer a well as of laws of conservation in continua, this chapter describes how these laws con be adopted to the case of porous media. Quantitative data are then given on the physical magnitudes brought into play by transfer phenomena in porous media.

  1. Heat transfer with organic fluids; Transferts de chaleur par liquides organiques

    Energy Technology Data Exchange (ETDEWEB)

    Lanza, F [Association Euratom-CEA, Centre d' Etudes de Grenoble, 38 (France). Dept. de Recherches sur la Fusion Controlee; Ricque, R; Villeneuve, J P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1964-07-01

    Using a test channel with a circular cross-section of 12 mm internal diameter the following heat transfer correlation, valid to about {+-} 6 p. 100, was determined for the terphenyls OMP and OM2 with 0, 10, 20 or 30 p. 100 of high polymers: Nu{sub b} = 0.00835 Re{sub b}{sup 0.9} Pr{sub L}{sup 0.4}. This correlation was established with fluxes ranging from 50 to 100 W/cm{sup 2}, temperatures from 290 to 420 C and Reynolds number from 30 000 to 350 000. 8 long-term tests were carried out (250 to 1000 hours continuous running) to determine how deposition on the heating surfaces affects the exchange coefficient. The loops is made of stainless steel except for one part in soft steel. No deposits are observed even if the terphenyl contains 30 ppm of chlorure, while on the other hand deposition is appreciable when heavy substances containing combined oxygen are added. (authors) [French] On a determine sur un canal d'essai de section circulaire de 12 mm de diametre interieur, la correlation de transfert de chaleur suivante valable a {+-} 6 p.100 pres pour les terphenyles OMP et OM2 avec 0, 10, 20 ou 30 p. 100 de haute polymeres Nu{sub b} = 0,00835 Re{sub b}{sup 0.9} Pr{sub L}{sup 0.4}. Cette correlation a ete etablie dans une gamme de flux de 50 a 100 W/cm{sup 2}, de temperature de 290 a 420 C, de Reynolds de 30 000 a 350 000. On a effectue 8 essais de longue duree (250 a 1 000 heures en regime continu) pour determiner l'effet sur le coefficient d'echange de l'encrassement des surfaces chauffantes. La boucle est en acier inoxydable sauf une partie en acier doux; on n'observe aucun encrassement meme si le terphenyle contient 30 ppm de chlore; par contre l'encrassement est sensible quand on ajoute des produits lourds contenant de l'oxygene combine. (auteurs)

  2. Heating of leads casks. An analytical solution to the heat equation made up of a series of Laguerre functions; Echauffement des chateaux de plomb. Une solution analytique a l'equation de la chaleur constituee par une serie de fonctions de Laguerre

    Energy Technology Data Exchange (ETDEWEB)

    Formery, Ph; Gilles, A [Commissariat a l' Energie Atomique, Dir. des Productions, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1968-07-01

    The packing used for the transport of highly radioactive materials such as in-pile irradiated rods; have to comply to fairly strict safety standards. They should in particular resist to fire without the radioactive protection being seriously affected. The heating of a transport cask placed in a fire has been calculated by normal automatic computation methods assuming that only thermal radiation is responsible for the heating and that this obeys STEFAN'S law. Simultaneously, a purely analytical treatment has been attempted as follows. The existence of a simple solution, of the Laguerre function type, to the heat equation has been demonstrated. By superposing an infinite number of simple solutions, it is possible to produce a fairly general solution, depending on parameters, which satisfies the initial state and the limiting conditions. The parameters can be adjusted so that the temperature and the flux produced on the shell by this solution satisfy approximately STEFAN'S relationship. (authors) [French] Les emballages qui servent au transport de produits fortement radioactifs, tels que des barreaux irradies dans les piles, doivent satisfaire a des normes de securite assez strictes. Ils doivent, en particulier, resister au feu sans que la protection contre le rayonnement soit sensiblement entamee. L'echauffement, par seul rayonnement thermique suppose obeir a la loi de STEFAN, d'un chateau de transport plonge dans un feu a ete calcule par les methodes habituelles du calcul automatique. Parallelement a ete tentee l'approche purement analytique que voici: Une solution simple, du type fonction de LAGUERRE, a l'equation de la chaleur est mise en evidence. La superposition, en nombre infini, de solutions simples, permet de fabriquer une solution assez generale dependant de parametres, satisfaisant a l'etat initial et aux conditions aux limites. Les parametres peuvent etre ajustes de facon que la temperature et le flux engendres sur la coque par cette solution

  3. Entre servitude et autonomie. Quelle place pour l’écriture dans les sciences du langage ?*

    Directory of Open Access Journals (Sweden)

    Klinkenberg Jean-Marie

    2014-07-01

    Full Text Available Une controverse, dont les origines remontent à l’Antiquité, secoue régulièrement les sciences du langage, et a marqué certains moments importants de l’histoire de la linguistique française : elle concerne le caractère dérivé ou autonome de l’écriture par rapport à l’expression orale. Dans ce débat interviennent des considérations linguistiques, mais aussi historiques, esthétiques et philosophiques. On examinera ici les thèses des autonomistes (parmi lesquels on distinguera les autonomistes radicaux et les autonomistes relatifs et des glossographistes (également répartis entre radicaux et relatifs pour faire apparaitre les conséquences ultimes, et souvent aporétiques, de leurs positions. Dans un exposé dont la spécificité sera qu’il mobilise autant les acquis de la sémiotique visuelle et de la sémiotique de l’espace que ceux de la linguistique, nous testerons l’intérêt et les limites de ces positions, pour énoncer une série de conditions auxquelles un système sémiotique doit obéir pour pouvoir être appelé écriture, et finalement aboutir à une définition de l’écriture échappant aux critiques.

  4. Présentation d'une boucle prototype de pompe à chaleur à absorption haute température industrielle de 100 kW Description of a 100-Kw Prototype Loop for an Industrial High-Temperature Absorption Heat-Pump

    Directory of Open Access Journals (Sweden)

    Thomas D.

    2006-11-01

    Full Text Available II apparait indispensable, dans le contexte énergétique actuel, de mettre au point de nouvelles techniques de revalorisation d'énergie. Les pompes à chaleur à absorption peuvent, dans certains secteurs industriels, apporter des solutions particulièrement intéressantes par rapport aux pompes à chaleur à compression notamment, en particulier dans le domaine des hautes températures de revalorisation (120-150 °C. Pour mener à bien les études entreprises sur ce thème, le Gaz de France travaille en étroite collaboration avec l'Institut du Génie Chimique de Toulouse et la Société Creusot-Loire. Dans une première partie, les auteurs rappellent les principes de fonctionnement des pompes à chaleurs à absorption et leurs caractères spécifiques. Quelques exemples d'applications industrielles sont proposés. Ils présentent, dans une deuxième partie, la boucle prototype de 100 kW qui a été réalisée et décrivent ses caractéristiques, son cycle de fonctionnement et le programme des essais. Ce pilote de taille semi-industrielle utilise le couple eau-bromure de lithium. La définition d'un prototype industriel de pompe à chaleur à absorption haute température et les compléments de recherche entrepris dans ce domaine constituent la troisième partie de la communication. In the present energy context, it seems absolutely necessary to develop new techniques for energy upgrading. In some industrial sectors, absorption heat pumps may bring particularly interesting solutions compared, in particular, to compression heat pumps, especially in the field of high-temperature upgrading (120-150°C. Reasearch is being done in this field by Gaz de France in close collaboration with the Institut du Génie Chimique in Toulouse and with Creusot-Loire. ,The first part of this article reviews the operating principles of absorption heat pumps and their specific features. Some examples of industrial applications are then proposed. The second part

  5. Impact de la mise en places des comités d'audit dans les banques tunisiennes

    OpenAIRE

    Sonda Marrakchi Chtourou; Sana Ben Hassine

    2006-01-01

    International audience; Dans le cadre de la présente étude, nous proposons d'investiguer l'impact de la création du comité d'audit sur certains éléments du système de gouvernance des banques tunisiennes. Plus particulièrement, ces éléments concernent le fonctionnement du conseil d'administration, la qualité de l'information financière produite, l'indépendance de l'auditeur interne, la qualité du contrôle interne ainsi que l'étendue des travaux d'audit externe planifiés. A cet effet, l'étude d...

  6. Dosage de l'acide nitro-5 furylacrylique dans les vins blancs (1

    Directory of Open Access Journals (Sweden)

    Suzanne Lafon-Lafourcade

    1975-09-01

    Rappelons que l'acide nitro-5 furylacrylique est une substance jaune, inodore et sans saveur, stable à la lumière et à la chaleur. Ses sels de sodium et de potassium sont très solubles dans l'eau, dans l'alcool et le méthanol, mais insolubles dans les solvants non miscibles à l'eau. Le 5-NFA ne distille pas et n'est pas entraînable par la vapeur d'eau. (1 Travail réalisé en collaboration avec le Conseil Interprofessionnel du Vin de Bordeaux.

  7. Place de la splénectomie dans la prise en charge de l’hypertension portale non cirrhotique: à propos de 3 cas

    Science.gov (United States)

    Belhamidi, Mohamed Said; Hammi, Salah Eddine; Bouzroud, Mohamed; Benmoussa, Mustapha; ali, Abdelmounaim Ait; Bounaim, Ahmed

    2017-01-01

    L’hypertension portale non cirrhotique est une affection décrite pour la première fois par Guido BANTI en 1898 comme une affection associant une hypertension portale avec splénomégalie et anémie sur foie sain. Le diagnostic repose sur l’échographie abdominale, la splénoportographie et la biopsie hépatique. Le but de notre travail est d’évaluer la place de la splénectomie dans l’hypertension portale non cirrhotique à travers une étude rétrospective portant sur 3 malades dont 2 femmes et un homme pris en charge dans notre formation entre Janvier 2010 et Septembre 2016. Le diagnostic de l’hypertension portale idiopathique a été basé sur les critères suivants : une hypertension portale, la présence des varices oesophagiènnes avec une splénomégalie, l’absence de cirrhose ou d’autres affections hépatiques responsables de l’hypertension portale. La splénectomie a été réalisée chez les 3 malades. L’évolution après la splénectomie était marquée par la normalisation des signes cliniques, radiologiques et biologiques de cette affection, avec absence de récidive des varices œsophagiennes. La splénectomie associée à la ligature des varices œsophagiennes pourraient être suffisantes pour traiter ce syndrome et surtout ses conséquences sans avoir recours à une dérivation spléno-rénale. PMID:29255554

  8. Economic aspects of electricity and industrial heat generating reactors; Aspect economique des reacteurs produisant de l'electricite et de la chaleur industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J; Moulle, N; Dutheil, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Aldebert, J [Institut National des Sciences et Techniques Nucleaires (INSTN), CEA Saclay, 91 - Gif sur Yvette (France)

    1964-07-01

    The economic advantage of electricity-generating nuclear stations decreases when their size decreases. However, when a counter-pressure turbine is joined on to a reactor and the residual heat can be properly used, it can be shown that fairly low capacity nuclear equipment may compete with conventional equipment under certain realistic enough conditions. The aim of this paper is to define these special conditions under which nuclear energy can be profitable. They are connected with the location and the general economic environment of the station, the pattern of the electricity and heat demands it must meet, the level of fuel and specific capital costs, nuclear and conventional. These conditions entail certain technical and economic specifications for the reactors used in this way otherwise they are unlikely to be competitive. In addition, these results are referred to the potential steam and electricity market, which leads us to examine certain uses for the heat generated by double purpose power stations; for example, to supply combined industrial plants, various types of town heating and for removal of salt from sea water. (authors) [French] L'interet economique de centrales nucleaires productrices d'electricite decroit lorsque la puissance decroit. Cependant, lorsqu'on associe une turbine a contrepression a un reacteur et qu'il est possible d'utiliser dans de bonnes conditions la chaleur residuelle, on peut montrer que dans certaines conditions assez realistes, des equipements nucleaires d'une puissance unitaire peu elevee peuvent etre competitifs avec des equipements conventionnels. Cette communication a donc pour but de mettre en evidence quelles sont ces conditions particulieres de rentabilite de l'energie nucleaire. Elles sont liees a la localisation de la centrale et a son contexte economique general, a la structure de la demande d'energie electrique et thermique a laquelle elle doit satisfaire, au niveau des couts des combustibles et des investissements

  9. Economic aspects of electricity and industrial heat generating reactors; Aspect economique des reacteurs produisant de l'electricite et de la chaleur industrielle

    Energy Technology Data Exchange (ETDEWEB)

    Gaussens, J.; Moulle, N.; Dutheil, F. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Aldebert, J. [Institut National des Sciences et Techniques Nucleaires (INSTN), CEA Saclay, 91 - Gif sur Yvette (France)

    1964-07-01

    The economic advantage of electricity-generating nuclear stations decreases when their size decreases. However, when a counter-pressure turbine is joined on to a reactor and the residual heat can be properly used, it can be shown that fairly low capacity nuclear equipment may compete with conventional equipment under certain realistic enough conditions. The aim of this paper is to define these special conditions under which nuclear energy can be profitable. They are connected with the location and the general economic environment of the station, the pattern of the electricity and heat demands it must meet, the level of fuel and specific capital costs, nuclear and conventional. These conditions entail certain technical and economic specifications for the reactors used in this way otherwise they are unlikely to be competitive. In addition, these results are referred to the potential steam and electricity market, which leads us to examine certain uses for the heat generated by double purpose power stations; for example, to supply combined industrial plants, various types of town heating and for removal of salt from sea water. (authors) [French] L'interet economique de centrales nucleaires productrices d'electricite decroit lorsque la puissance decroit. Cependant, lorsqu'on associe une turbine a contrepression a un reacteur et qu'il est possible d'utiliser dans de bonnes conditions la chaleur residuelle, on peut montrer que dans certaines conditions assez realistes, des equipements nucleaires d'une puissance unitaire peu elevee peuvent etre competitifs avec des equipements conventionnels. Cette communication a donc pour but de mettre en evidence quelles sont ces conditions particulieres de rentabilite de l'energie nucleaire. Elles sont liees a la localisation de la centrale et a son contexte economique general, a la structure de la demande d'energie electrique et thermique a laquelle elle doit satisfaire, au niveau des couts des

  10. Heat and mass transfers in the jets; Transferts de chaleur et de masse dans les jets

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This day on the heat and mass transfers in the jets, was organized by the SFT (French Society of Thermic) to present the state of the art in the domain. Fifteen presentations allowed the participants to discuss about turbulent flows, simulation of fluid flow and jets impacts. (A.L.B.)

  11. Transgressions d’immigrés pour l’accès à d’autres « places » dans la société

    Directory of Open Access Journals (Sweden)

    Zaïha Zeroulou

    2015-12-01

    Full Text Available Prendre la décision d’émigrer est un acte de transgression qui implique des processus de rupture, de remise en cause des normes traditionnelles. L’émigration déclenche une dynamique de transgressions plurielles qui met en jeu les capacités à agir des immigrés pour s’émanciper du groupe d’origine et réaliser le rêve «d’une vie autre» ailleurs. S’appropriant l’héritage parental des «compétences d’émigration», les enfants s’inscrivent dans la continuité en refusant la «condition immigrée». Fortement diplômés, ils occupent des «places» socialement valorisées. Immigrant transgression allowing access to other « roles » in society Abstract: Deciding to emigrate is an act of transgression that involves breaking away and challenging traditional norms. Emigrating triggers a multiple transgressions dynamic that jeopardizes the immigrants' ability to cut off ties with their group of origin and to realize the dream of “another life” elsewhere. Children appropriate the parental legacy of “emigration skills” which they are perpetuating by refusing the “immigrant condition”. Highly qualified, they occupy socially valued “roles”.

  12. Un lieu pour les figures dans la théorie de l’argumentation A Place for Rhetorical Figures in Argumentation Theory

    Directory of Open Access Journals (Sweden)

    Christian Plantin

    2009-04-01

    Full Text Available A partir du traitement des figures dans le Traité de l’Argumentation (TA de Perelman et Olbrechts-Tyteca, cet article porte sur la question de la place des figures dans la théorie de l’argumentation. La première partie revient brièvement sur différentes formes de rhétorique, dont une rhétorique de l’ornement ayant pour instrument principal les figures. Une théorie moderne de l’argumentation orientée vers la recherche des fallacies établit une coupure radicale entre argumentation, instrument de recherche de la vérité et rhétorique ornée, que Locke caractérise comme « a powerful instrument of error and deceit ». Cette conception suppose l’usage d’un langage qu’on peut rapidement caractériser comme « artificiel », qui n’est pas celui de l’argumentation ordinaire. Avant d’être des « decorations » les figures sont des « instruments » de structuration de la parole ; et les topoi, instruments de l’argumentation, n’obéissent pas à d’autres mécanismes que les tropes, qui semblent toujours parler à côté et manquer leur objet. La seconde partie s’intéresse à une partie quelque peu délaissée du TA, l’usage qu’il fait des figures et la vision théorique, à la fois cavalière et décisive, qu’il en propose. Le TA ouvre la voie à une conception des figures non pas comme « vain ornement » mais comme une première sémantique du discours argumentatif ; c’est ce qu’on peut montrer sur le cas des « figures du choix, de la présence et de la communion ». En conséquence, la pensée des figures peut et doit être intégrée à une théorie de l’argumentation qui prend en compte le langage dans la parole, avec ses stratégies de construction des objets, du locuteur, de l’interlocuteur et de leurs émotions.This paper deals with the treatment of figures of speech in Perelman’s and Olbrechts-Tyteca’s Treatise on Argumentation (TA, and, more broadly, with the place of

  13. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: Conception de PCB rapides dans le flot Cadence : 11.6.03 (matin) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) Introduction to PVSS : 16.6.03 (p.m.) Basic PVSS : 17 - 19.6.03 (3 days) Réalisation de PCB rapides dans le flot Cadence : 17.6.03 (matin) PVSS - JCOP Framework Tutorial : 20.6.03 (1 day) Programmation automate Schneider : Programmation automate Schneider TSX Premium - 2ème niveau : 24 - 27.6.03 (4 jours) - audience : toute personne qui veux maitriser la mise en uvre et la programmation des fonctions spécialisées d'un automate TSX Premium - objectifs : maitriser la mise en uvre et la programmation des fonctions spécialisées d'un automate TSX Premium Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6.03 - 4, 5 & 7.11.03 (session de 3 jours) ** The number of places available may vary. Please check our Web site to find out the current availability. If you wish to participate in one of these courses, pl...

  14. Optimization of Gas Turbine Cogeneration Systemfor Various Heat Exchanger Configurations Optimisation des systèmes de turbine à combustion en cogénération pour différentes configurations des échangeurs de chaleur

    Directory of Open Access Journals (Sweden)

    Costea M.

    2011-11-01

    flux de chaleur produit par combustion imposé ou la température maximale du cycle imposée. Le modèle considère également l’irréversibilité due au frottement dans le compresseur et la turbine et celle due aux pertes de chaleur dans la chambre de combustion et les échangeurs de chaleur. Le rendement au sens du premier principe du système sans et avec cogénération et le rendement exergétique rendent compte des avantages de la cogénération, et aident le concepteur à choisir la meilleure configuration de turbines à combustion en fonction de ses besoins. Des données expérimentales d’une microturbine opérationnelle ont été utilisées pour valider le modèle. La puissance fournie et les rendements au sens du premier principe et exergétique sont optimisés par rapport à un ensemble de paramètres de fonctionnement. Les valeurs optimales des paramètres du moteur à turbine à combustion qui correspondent au maximum de puissance fournie, respectivement au maximum de rendement thermodynamique sont discutées. Les résultats montrent que la plupart des performances maximales correspondent aux mêmes valeurs optimales du taux de compression pour le flux imposé, sauf le rendement exergétique maximum qui demande des valeurs plus élevées du taux de compression que celles pour le maximum du flux d’exergie. Une comparaison des performances de ces trois configurations et les perspectives sont proposées.

  15. Modelling of a Spark Ignition Engine for Power-Heat Production Optimization Modèle de moteur à allumage commandé en vue de l’optimisation de la production chaleur-force

    Directory of Open Access Journals (Sweden)

    Descieux D.

    2011-09-01

    Full Text Available Spark ignition gas engine is more and more used in order to produce electricity and heat simultaneously. The engine crankshaft drives a synchronous electric generator. The thermal power output is recovered from the engine coolant system and exhaust gas, and is used to produce generally hot water for heating system. In order to have a better adequacy between supply (production of the engine and user demand, good knowledge of the engine and implemented phenomena are necessary. A generic methodology is proposed to simulate the stationary state response of a SI engine. The engine simulation is based on a one zone thermodynamic model, which characterizes each phase of the engine cycle to predict energy performances: exergy efficiency as high as 0.70 is attainable. Le moteur a allumage commande alimente en gaz est un moteur de plus en plus utilise pour la production simultanee d’electricite et de chaleur. Classiquement le moteur entraine sur l’arbre une generatrice electrique. Le flux thermique est recupere principalement sur le systeme de refroidissement du moteur ainsi que sur les fumees chaudes et il est generalement utilise pour produire de la chaleur pour les systemes de chauffage. Pour avoir une meilleure adaptation entre la production du moteur et la demande de l’usager, une bonne connaissance des evolutions dans le moteur et des phenomenes correspondants est necessaire. Une methode thermodynamique generale est proposee pour simulation du fonctionnement dynamique stationnaire d’un MACI. Le modele utilise une analyse monozone et les caracteristiques de chaque transformation du cycle pour etudier les performances energetiques : rendement exergetique de l’ordre de 0,70.

  16. THE PLACE OF GRAMMAR IN A FRENCH TEACHING METHODS FROM 1960s TO TODAY LA PLACE DE LA GRAMMAIRE DANS LES METHODES DE FLE DES ANNEES 60 JUSQU'A NOS JOURS

    Directory of Open Access Journals (Sweden)

    Hanife Nâlân GENÇ

    2011-01-01

    Full Text Available In this study, we tried to analyse the place of grammar in a french teaching methods. Methods were selected and studied in terms of comparative method in order to analyse better the procedures and evaluations of activities.We took up methods which are said ‘traditionals’ which contain the direct method from 1901 to 1960s, audio lingual method from 1940 to 1970, structure-global audio visual method from 1960 to 1970 and methods which are said ‘moderns’ which contain communicative approach method from 1970 to years 2000 and finally which is actual method (co- actual. For the traditional methods, we studied essentially among these three methods which are Cours de Langue et de Civilisation Français, Le Français Accéléré et Intercodes, because of their affinity and progress of lesson rather than considered classic. These methods are included the gramar formal and applied it structurally and explicitly. Contrary to traditional metods, these metods take into account, the situations, the functional notions and apply them to the implicit grammar.We concretized our point of view, by basing on the examples and the census of the metods mentioned. We reached to a conclusion that what the training objects and process of grammar must be according to linguistic demand of learner. Bu araştırmada, ikinci veya üçüncü dil olarak Fransızcanın öğretiminde kullanılan ve Fransızcada "metot" sözcüğüyle karşılık bulan "ikinci dil olarak Fransızca öğretimi amaçlı" yazılmış ders kitaplarında dilbilgisine verilen yeri irdelemeye çalıştık. Ele aldığımız kitaplar, etkinliklerin süreçlerini ve işleyişlerini daha iyi çözümleyebilmek bakımından, karşılaştırmalı bir yaklaşımla seçilmiş ve incelenmiştir.1901’den 60’lı yıllara kadar süren doğrudan metot (MD, 1940’dan 1970’e kadar devam eden işitsel sözel metot, 1960’dan 1970’e kadar süren genel yapısalcı görsel işitsel (SGAV yöntemleri i

  17. Places available**

    CERN Document Server

    2003-01-01

    Places are available in the following courses : FrontPage 2000 - niveau 1: 20 & 21.5.03 (2 jours) PIPES-2003 : Pratique du sertissage de tubes métalliques et multicouches: 21.5.03 (1 jour) Introduction à la CAO Cadence: de la saisie de schéma Concept-HDL au PCB : 20 & 22.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (E): 5, 6, 12, 13, 26, 27.6.03 (6 days) EXCEL 2000 - niveau 1: 10 & 11.6.03 (2 jours) Conception de PCB rapides dans le flot Cadence: 11.6.03 (matin) EXCEL 2000 - level 1: 12 & 13.6.03 (2 days) Introduction to PVSS: 16.6.03 (half-day, pm) Basic PVSS: 17 - 19.6.03 (3 days) Réalisation de PCB rapides dans le flot Cadence: 17.6.03 (matin) LabView DSC (language to be defined): 19 & 20.6.03 PVSS - JCOP Framework Tutorial: 20.6.03 (1 day) EXCEL 2000 - niveau 2: 24 & 25.6.03 (2 jours) Siemens SIMATIC Training: Introduction to STEP7: 3 & 4.6.03 (2 days) STEP7 Programming: 16 - 20.6.03 (5 days) Simatic Net Network: 26 & 27.6.03 (2 days) These courses will be given...

  18. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : EXCEL 2000 - niveau 1 : 10 & 11.6.03 (2 jours) Conception de PCB rapides dans le flot Cadence : 11.6.03 (matin) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) Introduction to PVSS : 16.6.03 (p.m.) Basic PVSS : 17 - 19.6.03 (3 days) Réalisation de PCB rapides dans le flot Cadence : 17.6.03 (matin) PVSS - JCOP Framework Tutorial : 20.6.03 (1 day) EXCEL 2000 - niveau 2 : 24 & 25.6.03 (2 jours) Siemens SIMATIC Training : Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) STEP7 Programming : 16 - 20.6.03 (5 jours/5 days) Simatic Net Network : 26 & 27.6.03 (2 jours/2 days) These courses will be given in French or English following the requests. Programmation automate Schneider : Programmation automate Schneider TSX Premium - 1er niveau : 10 - 13.6.03 (4 jours) - audience : toute personne qui veux maitriser la msie en uvre et la programmation d'un automate TSX Premium - objectifs : maitriser la mise en uvre et la programmation d'un autom...

  19. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : FrontPage 2000 - niveau 1 : 20 & 21.5.03 (2 jours) PIPES-2003 : Pratique du sertissage de tubes métalliques et multicouches : 21.5.03 (1 jour) Introduction à la CAO Cadence : de la saisie de schéma Concept-HDL au PCB : 20 & 22.5.03 (2 jours) AutoCAD 2002 - niveau 2 : 3 & 4.6.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 5, 6, 12, 13, 26, 27.6.03 (6 jours) EXCEL 2000 - niveau 1 : 10 & 11.6.03 (2 jours) Conception de PCB rapides dans le flot Cadence : 11.6.03 (matin) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) PowerPoint 2000 (F) : 17 & 18.6.03 (2 jours) Réalisation de PCB rapides dans le flot Cadence : 17.6.03 (matin) FrontPage 2000 - niveau 2 : 19 & 20.6.03 (2 jours) LabView DSC (langue à décider/language to be defined) : 19 & 20.6.03 EXCEL 2000 - niveau 2 : 24 & 25.6.03 (2 jours) Siemens SIMATIC Training: Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 16 - 20.6.03 (5 days) Simatic...

  20. Places disponibles*/Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following course : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 20 - 22.1.03 (3 days) Introduction to PVSS : 27.1.03 (Afternoon) free course but registration necessary Basic PVSS : 28 - 30.1.03 (3 days) MAGNE-03 - Magnétisme pour l'électrotechnique : 28 - 30.1.03 (3 jours) MAGNE-03 - Magnetism for Technical Electronics : 11 - 13.2.03 (3 days) AutoCAD 2002 - niveau 1 : 24, 25.2 et 3, 4.3.03 (4 jours) AutoCAD 2002 - niveau 2 : 10 & 11.3.03 (2 jours) C++ for Particle Physicists : 10 - 14.3.03 (6 X 3 hour lectures) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Si vous désirez ...

  1. Ilot de Chaleur a Quebec: Cas d'hiver

    Science.gov (United States)

    Leduc, Richard; Jacques, Ghislain; Ferland, Michel; Le Lièvre, Claude

    1981-11-01

    This paper describes the urban heat island in Quebec City on a typical clear winter night. This is a follow-up to a study made on a summer night in August 1980; the reader will find a detailed description of the region in Leduc et al. (1980). On February 25, 1980 at 21:30 EST, nearly 200 measurements of temperature were taken at preselected points by 17 mobile observers; a mini-sonde was launched near the Duberger meteorological tower while upper air data were obtained from a sonde launched at Valcartier CFB. Additional data were available from the five regular climatological stations in greater Quebec City and from 2 other thermographs in order to evaluate cooling rates. On the day of the 25th, a developing low pressure area over the eastern coast brought cold air from the northwest toward Quebec City. On that day, the maximum temperature was - 1 °C while the minimum on the following night dropped to - 19 °C. At the time of the experiment, the sky was clear and the winds were westerly at 1.5 m s-1 at the surface and northwesterly at 6 m s-1 at 122 m. A strong inversion was present in the lowest 200 m while upper inversions were noted on the upper air sounding. As noted in the summer experiment, cooling rates, according to the Oke et al. (1972) criteria, reflected a rural behaviour at all stations equipped with a thermograph. It is to be noted that no data on cooling rates are available for the highly urbanized sectors. One notes a relatively warm zone in the downtown area where temperature reached - 8 °C; there is also a cold zone, at the same location as during the summer experiment. The mean temperature gradient between the urban and rural sectors was 5 °C, which is comparable with that observed in August 1979 (6 °C). Thus, the urban heat island does not seem to be more intense in winter than in summer. Relatively large areas of uniform temperature were detected at places where the summer experiment indicated sharp spatial contrasts; this could be

  2. Places disponibles/Places available

    CERN Multimedia

    2004-01-01

    Si vous désirez participer à l'un des cours suivants, veuillez en discuter avec votre superviseur et vous inscrire électroniquement en direct depuis les pages de description des cours dans le Web que vous trouvez à l'adresse : http://www.cern.ch/Training/ ou remplissez une « demande de formation » disponible auprès du Secrétariat de votre Division ou de votre DTO (Délégué divisionnaire à la formation). Les places seront attribuées dans l'ordre de réception des inscriptions. If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Off...

  3. On the determination of the heat of fusion of one of the constituents of a binary mixture from the heat of fusion of the other, by measurement of the slopes of two liquidus curves at the eutectic point; Sur la determination de la chaleur de fusion d'un des constituants d'un melange binaire a partir de la chaleur de fusion de l'autre, par mesure des pentes des deux liquidus au point d'eutexie

    Energy Technology Data Exchange (ETDEWEB)

    Dode, Maurice; Hagege, Raoul [Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

    1959-07-01

    A method for calculating latent heats of fusion from binary diagrams of liquid-solid equilibrium was proposed several years ago by J. Bousquet and one of us. The method is base on the hypothesis of the regularity of the solution in a small region around the eutectic and involves an integration along the liquidus curves slightly extrapolated below the eutectic point. Reprint of a paper published in Comptes rendus des seances de l'Academie des Sciences, t. 248, p. 2339-2341, sitting of April 20, 1959 [French] Une methode de calcul des chaleurs latentes de fusion a partir des diagrammes binaires d'equilibre liquide-solide a ete proposee il y a quelques annees par J. Bousquet et l'un de nous. La methode repose sur l'hypothese de la regularite de la solution dans un petit domaine autour de l'eutectique et comporte une integration le long des liquidus, legerement extrapoles en dessous de l'eutectique. Reproduction d'un article publie dans les Comptes rendus des seances de l'Academie des Sciences, t. 248, p. 2339-2341, seance du 20 avril 1959.

  4. Installation for the study of heat transfer with high flux density; Installation d'etude de transmission de chaleur a densite de flux elevee

    Energy Technology Data Exchange (ETDEWEB)

    Robin, M; Schwab, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1957-07-01

    As a result of their very low vapor pressure, metals with a low fusion point (sodium, sodium-potassium alloys, etc.) can be used at high temperature, as heating fluids, in installations whose internal pressure is close to atmospheric pressure. Owing to the very high convection coefficients which can be reached with these fluids and to the large temperature differences utilizable, it is possible to produce through the exchange surfaces considerable heat flux densities, of the order of those which exist through the canning of fuel elements in nuclear reactors. The installation described allowed a flux density of more than 200 W/cm{sup 2} to be obtained, the heating fluid being a Na-K alloy (containing 56 per cent by weight of potassium) brought to a temperature around 550 deg. C. (author) [French] Par suite de leur tres faible pression de vapeur, les metaux a bas point de fusion (sodium, alliages sodium-potassium, etc.) peuvent etre utilises a haute temperature, comme fluides de chauffage, dans des installations dont la pression interne est voisine de la pression atmospherique. Grace aux coefficients de convection tres eleves que ces fluides permettent d'atteindre et aux importantes differences de temperature utilisables, il est possible de produire, a travers les surfaces d'echange, des densites de flux de chaleur considerables, de l'ordre de celles qui existent a travers les gaines des elements combustibles des reacteurs nucleaires. L'installation decrite a permis l'obtention d'une densite de flux de plus, de 200 W/cm{sup 2}, le fluide chauffant etant de l'alliage Na-K (a 56 pour cent en poids de potassium) porte a une temperature voisine de 550 deg. C. (auteur)

  5. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : WorldFIP 2003 pour utilisateurs : 11-14.2.03 (4 jours) DISP-2003 ? Spring I Term : Introduction to Digital Signal Processing : 20, 27.2, 6, 13, 20, 27.3, 3.4.03 (7 X 2-hour lectures) AXEL-2003 - Introduction to Accelerators : 24-28.2.03 (10 X 1-hour lectures) AutoCAD 2002 - niveau 1 : 24, 25.2 & 3, 4.3.03 (4 jours) Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 ? 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) MAGNE-03 - Magnetism for Technical Ele...

  6. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/Language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView base 1/LabView Basics 1 : 9 - 11.4.03 (3 jours/3 days) Langue à définir/Language to be decided DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (...

  7. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : DISP-2003 - Spring I Term : Introduction to Digital Signal Processing : 20, 27.2, 6, 13, 20, 27.3, 3.4.03 (7 X 2-hour lectures) AXEL-2003 - Introduction to Accelerators : 24 - 28.2.03 (10 X 1-hour lectures) AutoCAD 2002 - niveau 1 : 24, 25.2 & 3, 4.3.03 (4 jours) Introduction à Windows 2000 au CERN : 25.2.03 (1/2 journée) LabView base 2/LabView Basics 2 : 10 & 11.3.03 (2 jours/2 days) langue à définir/Language to be decided C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) LabView avancé /LabView Advanced : 12 - 14.3.03 (3 jours/3days) Langue à définir/language to be decided AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, regis...

  8. Places available **

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following courses : C++ for Particle Physicists : 10 - 14.3.03 (6 X 3-hour lectures) Introduction to PVSS : 10.3.03 (half day, afternoon) Basic PVSS : 11 - 13.3.03 (3 days) PVSS - JCOP Framework Tutorial : 14.3.03 (1 day) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView base 1/LabView Basics 1 : 9 - 11.4.03 (3 jours/3 days) Langue à définir/language to be decided DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 11 & 12.3.03 / 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16...

  9. Regards critiques des jeunes Marocains sur leur place dans la vie politique nationale et les mobilités vers l’Europe

    Directory of Open Access Journals (Sweden)

    Zoubir Chattou

    2015-06-01

    Full Text Available L’objet de cet article est d’expliciter les aspirations politiques des jeunes au Maroc et leurs perceptions des mobilités transnationales. Rappelons que la thématique de la jeunesse a suscité un intérêt particulier ces dernières années au sein de ce Maroc en mouvement. En effet, le Pays connaît des changements profonds au niveau politique, économique, démographique et socioculturel qui ont incontestablement affecté les perceptions des jeunes selon la diversité de leurs profils. Ces changements touchent également les structures de pouvoir, les organisations de la société civile, les droits humains et l’évolution des rapports Nord/Sud. Il s’agit donc dans ce travail de saisir le regard critique des jeunes interviewés de l’ordre national et de ses articulations avec le niveau mondial. Ceci rend plus visible leur revendication d’une citoyenneté effective à la fois à l’échelle nationale et mondiale. Plusieurs focus groupes de jeunes (65 jeunes lycéens et du supérieur d’origines rurale et citadine ont été organisés dans le cadre de cette étude.

  10. TRANSFERT THERMIQUE INSTATIONNAIRE DANS UN MUR TRICOUCHES SUBISSANT UN CHANGEMENT DE PHASE PAR SOLIDIFICATION.

    OpenAIRE

    O Arfi; E Mezaache

    2016-01-01

    Une étude numérique du transfert de chaleur instationnaire dans un mur tricouches est présentée. Le modèle physique est basé sur l’équation de conduction thermique unidirectionnelle en tenant compte des équations de couplages au niveau des interfaces et des conditions convectives de surfaces. Les équations de transfert sont données en représentation enthalpique pour le matériau à changement de phase (MCP), et en formulation générale pour les régions solides. La formulation adimensionnelle a p...

  11. Dans quelle mesure la mise en place des navettes autonomes dans les zones périphériques de Genève pourrait remplacer l’utilisation des véhicules privés ?

    OpenAIRE

    Safarov, Tim; Konstantas, Dimitri

    2017-01-01

    Ce travail est basé sur un avant-projet nommé « AVENUE » (Autonomous Vehicles to Evolve to a New Urban Experience) proposé à la Commission européenne des transports et de mobilité. Il s’agit d’un projet qui a pour but de démonter l’utilité que pourraient avoir les véhicules autonomes dans le cadre des transports publics et de mettre en lumière les divers avantages pratiques, économiques, environnementaux et sociaux qu’ils pourraient procurer. Le travail suivant tente avant tout d’explorer l’é...

  12. Reconstruction et identification des électrons dans l'expérience ATLAS Participation à la mise en place d'un Tier 2 de la grille de calcul

    CERN Document Server

    Derue, Frederic

    2008-01-01

    L'origine de la masse des particules élémentaires est liée au mécanisme de brisure de la symétrie électrofaible. Son étude sera l'un des enjeux majeurs de l'expérience Atlas auprès du Large Hadron Collider, au Cern à partir de 2008. Dans la plupart des cas, les recherches seront limitées par notre connaissance des performances du détecteur, telles que la précision avec laquelle l'énergie des particules est reconstruite ou l'efficacité avec laquelle elles sont identifiées. Ce mémoire d'habilitation présente un travail portant sur la reconstruction des électrons dans Atlas avec des données simulées et des données prises durant le test en faisceau combiné qui s'est déroulé en 2004. L'analyse des données d'Atlas nécessite l'utilisation de ressources de calcul et de stockage importantes qui a impliqué le développement d'une grille de calcul mondiale dont un des noeuds est développé au laboratoire. Le manuscrit présente aussi l'effort effectué au LPNHE Paris pour la mise en place d'...

  13. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: LabVIEW - Basics 1 :  10 - 12.12.01 (3 days) Introduction to XML :  12 & 13.12.01 (2 days) Introduction au PC et Windows 2000 : 12 & 14.12.01 (2 jours) LabVIEW - Basics 2 :  13 - 14.12.01 (2 days) Habilitation électrique : superviseurs : 17.12.2001 (1/2 journée) MS-Project 2000 : 10 & 11.01.02 (2 jours) EXCEL 2000 - niveau 2 : 15 - 16.1.02 (2 jours) Sécurité dans les installations cryogéniques: 15-17.1.2002 (2 demi-journées) C++ Programming Level 2 - Traps and Pitfalls :  15 - 18.1.2002  (4 days) ELEC-2002 Winter Term: Readout and system electronics for Physics  15.1.2002 - 7.2.2002 (8 half- days) Nouveautés de WORD 2000 : 18.1.02 (1/2 journée) LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 -...

  14. PLACES AVAILABLE

    CERN Multimedia

    Enseignement Technique; Tel. 74924

    2001-01-01

    Places are available in the following courses: MS-Project 2000 : 10 & 11.01.02 (2 jours) EXCEL 2000 - niveau 2 : 15 - 16.1.02 (2 jours) Sécurité dans les installations cryogéniques: 15-17.1.2002 (2 demi-journées) C++ Programming Level 2 - Traps and Pitfalls :  15 - 18.1.2002  (4 days) ELEC-2002 Winter Term: Readout and system electronics for Physics  15.1.2002 - 7.2.2002 (8 half- days) Nouveautés de WORD 2000 : 18.1.02 (1/2 journée) LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 - 25.1.02 (4 jours) MS-Project 2000 : 24 & 25.01.02 (2 jours) Introduction au PC et à Windows 2000 au CERN : 29 - 30.1.02 (2 jours) LabView Base 1 : 4 - 6.2.02 (3 jours) LabView DAQ  (E) :  7 & 8.02.02 (2 days) Hands-on Object-Oriented Design & Programming with Java :&nbs...

  15. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Automates et réseaux de terrain : 13 & 14.11.01 (3 jours) Introduction à Windows 2000 au CERN : 12 - 14.11.01 (1/2 journée) Introduction to Windows 2000 at CERN :  14.11.01  (half-day) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Sécurité dans les installations cryogéniques : 21 - 22.11.2001 (2 demi-journées) Introduction to C Programming :  21- 23.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Contract Follow-up (F) : 26.11.01 (1/2 journée) Object-Oriented Analysis and Design :  27 - 30.11.2001  (4 days) Introduction to the CERN Engineering Data Management System :  30.11.2001 (1 day) Electromagnetic Compatibility (EMC): Introduction (bilingual) :  3.12.01 (half-day) Introduction to the CERN Engineering Data Management System : 07.12.2001...

  16. Aznar, Hanotin, and May (eds., À la place du roi. Vice-rois, gouverneurs et ambassadeurs dans les monarchies française et espanole (Casa de Velázquez, 2014

    Directory of Open Access Journals (Sweden)

    Lisandra Estevez

    2016-06-01

    Full Text Available The French and Spanish courts were two of the most powerful cultural and political institutions in seventeenth-century Europe.  Both rivals and allies, the French and Spanish crowns were bound by disputes and diplomacy.  This anthology examines the Gallic and Iberian court systems from a comparative approach, filling an important lacuna in early modern political studies and diplomatic history.  It is based on the proceedings of a seminar held at the Casa de Velázquez, Madrid in June 2010. Edited by Daniel Aznar, Guillaume Hanotin and Niels F. May, À la place du roi. Vice-rois, gouverneurs et ambassadeurs dans les monarchies française et espanole (XVIe-XVIIIe siècles unites ten essays by leading scholars of seventeenth-century French and Spanish history.

  17. La place du pétrole dans l'économie de l'Arabie Saoudite The Position of Oil in the Saudi Arabian Economy

    Directory of Open Access Journals (Sweden)

    Berne M.

    2006-11-01

    Full Text Available En Arabie Saoudite, la contribution du secteur pétrolier au Produit Intérieur Brut est encore aujourd'hui de la moitié environ. Mais l'importance du pétrole ne se limite pas à ce chiffre. Au-delà de la comptabilité nationale, les mécanismes budgétaires et financiers, les grands équilibres économiques reposent dans une très large mesure sur l'existence d'importants revenus pétroliers perçus par l'état. Dans son effort de développement économique, l'Arabie a choisi de créer une puissante industrie pétrochimique pour valoriser sa production d'hydrocarbures et pour amorcer le décollage d'un secteur industriel diversifié. Cette stratégie a aussi des implications sur le bilan énergétique et le développement régional du pays. Ayant mis à profit les revenus pétroliers exceptionnels de la décennie passée pour construire une infrastructure remarquable, l'Arabie peut, malgré les problèmes économiques posés par son choix de développement, envisager raisonnablement une croissance équilibrée qui réduira sa dépendance sur le pétrole. In Saudi Arabia, the oil sector still accounts for half of the gross domestic product (GDP. But the importance of oil is not limited to this figure. Over and beyond national accounting and budgetary and financial mechanisms, the major economic balances to a very large extent are based on the existence of large oil revenues received by the state. In its economic development effort, Saudi Arabia has chosen to create a powerful petrochemical industry to upgrade its hydrocarbon production and to prime the take-off of a diversified industrial sector. This strategy also has implications on the energy balance and regional development of the country. Having taken advantage of the exceptional oil revenues of the past decade to build a remarkable infrastructure, Saudi Arabian can, despite the economic problems raised by its development choice, reasonably plan on balanced growth that will reduce its

  18. Les sources de protéines dans l’alimentation du bétail en France : la place des oléoprotéagineux

    Directory of Open Access Journals (Sweden)

    Peyronnet Corinne

    2014-07-01

    Full Text Available En France, les aliments concentrés totalisent 30 millions de tonnes de matières premières parmi lesquelles 64 % sont des céréales et 22 % des tourteaux d’oléagineux. Le déficit français en matières riches en protéines (dosant plus de 15 % de protéines qui était d’environ 70 % dans les années 1980 a baissé en dessous de 40 % successivement grâce au développement du pois dans les années 1990 puis du colza depuis les années 2000 avec des surfaces totales cultivées de 2,5 millions d’hectares environ. Le tourteau de soja reste le premier tourteau utilisé en France mais ses importations baissent, notamment depuis 2009, et il n’a représenté que 3,3 millions de tonnes sur la campagne 2012/2013. L’utilisation du tourteau de soja non OGM diminue également avec 0,6 million de tonnes en 2012 contre 1,2 en 2002. Les tourteaux de colza et tournesol ont quant à eux atteint respectivement 2,3 et 1,4 millions de tonnes en 2012/2013 parmi lesquels 700 000 tonnes de tourteau de tournesol High pro (à 36 % de protéines importées de la zone Mer noire et 600 000 tonnes de différentes qualités produites en France. Depuis 2013, des tourteaux de tournesol High pro sont également produits en France à Bassens. Les prix des MRP suivent le marché mondial du tourteau de soja mais la demande française pour des matières premières non OGM permet une meilleure valorisation des sources de protéines locales.

  19. La place de l’économie de marché dans une société rurale malgache : l’actualité des travaux de Polanyi

    Directory of Open Access Journals (Sweden)

    Antoine Deliège

    2008-12-01

    Full Text Available La pertinence des outils forgés par Karl Polanyi est manifeste pour comprendre la place de l’économie dans les sociétés dites « en voie de développement ». A travers l’étude d’une société rurale de Madagascar, l’auteur montre qu’il est difficile voire impossible de saisir les formes d’échanges en dehors de leur substrat social. Même si l’économie capitaliste s’est infiltrée en son sein, elle ne constitue pas une sphère propre. Au contraire, les comportements économiques sont enfouis, parfois dissimulés, mais toujours « encastrés » dans l’épaisseur insécable du social. L’analyse d’une cérémonie post-mortuaire- famadihana- illustre parfaitement l’interdépendance entre les logiques culturelle, symbolique, sociale et économique dans la société rurale merina. Cet exemple montre que si le marché est indispensable à la société rurale malgache pour sortir de la pauvreté, d’autres régulations que la seule régulation marchande sont présentes, possibles, recherchées et nécessaires.Nowadays, the concepts created by Karl Polanyi are still very helpful to understand the place of economy in society and especially in the “developing” countries. In analyzing a rural society of Madagascar, this paper argues that it is difficult, even impossible, to analyze the forms of exchange without their cultural substance. Even tough the capitalist economy is present; it does not constitute a separate sphere. On the contrary, the economic behaviors are buried, sometimes dissimulated, but always embedded in the social. The study of a post-mortem ceremony- famadihana- will illustrate the interdependence among the cultural, symbolic, social and economic logics in a merina rural society. This example will show that if the market is indispensable to the Malagasy rural society to avoid poverty, others regulations than the unique market regulation are present, possible, desirable and necessary.

  20. L'utilisation d'un mélange de sels fondus pour le stockage de chaleur

    OpenAIRE

    Roche , M.

    1980-01-01

    L'exploitation rationnelle de l'énergie solaire nécessite le stockage d'une partie de la chaleur produite aux heures d'ensoleillement pour pouvoir la restituer aux heures de consommation, ou tout au moins pour assurer la continuité du fonctionnement pendant les passages nuageux. Les sels fondus et en particulier le H.T.S. (Heat Transfer Salt) apparaissent comme les meilleurs fluides de stockage thermique. En effet, ils permettent un stockage d'une grande densité pour un faible coût et bénéfic...

  1. Designated Places

    Data.gov (United States)

    California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  2. Urraque, Elvire et Sancie. Le rôle et la place des infantes dans l’historiographie castillane (XIIIe-XIVe siècles

    Directory of Open Access Journals (Sweden)

    Patricia ROCHWERT-ZUILI

    2008-05-01

    Full Text Available Dans la « Quatrième partie » de l’Histoire d’Espagne (1270, on ne trouve nulle évocation du statut intermédiaire qu’avaient pu avoir, jusqu’au XIIe siècle, ces seigneures d’infantat, vouées à la chasteté et au célibat mais non recluses, ce qui leur permettait de participer pleinement à la vie politique du royaume. À travers l’image d’Urraque, d’Elvire et de Sancie, on perçoit surtout le rôle que jouèrent les femmes auprès d’Alphonse X et de ses successeurs. La Chronique de vingt rois (1282-1284 semble témoigner du soutien que le roi Sage avait pu trouver auprès de ses filles à la fin de son règne. Profondément influencées par la reine et régente Marie de Molina, la Version sancienne (1289 et la Chronique de Castille (1295-1312 laissent entrevoir les orientations du programme politique « molinien ». Ainsi, dans l’historiographie castillane du tournant des XIIIe et XIVe siècles, l’infante Urraque prend les traits d’une parfaite femme régnante façonnée à l’image de Marie de Molina.La « Cuarta parte » de la Estoria de España (1270 no guarda testimonio del estatuto intermediario que tuvieron, hasta el siglo XII, esas infantas castas y solteras pero no recluidas, lo que les permitía dedicarse plenamente a la vida política del reino. A través de Urraca, Elvira y Sancha se percibe más bien el papel que tuvieron las mujeres al lado de Alfonso X y sus sucesores. La Crónica de veinte reyes (1282-1284 parece rendir homenaje a las hijas del rey Sabio que lo acompañaron hasta el final de su reinado. En la Versión sanciana (1289 y la Crónica de Castilla (1295-1312, en las que influye el modelo de la reina y regente María de Molina, se destacan las orientaciones políticas del « molinismo ». De hecho, en la historiografía castellana de finales del XIII principios del XIV, la infanta Urraca tiene las características de una mujer reinante modélica inspirada en María de Molina.

  3. The part of the international investments in the Russian petroleum industry; La place des investissements internationaux dans l'industrie petroliere russe

    Energy Technology Data Exchange (ETDEWEB)

    Locatelli, C

    2004-03-01

    The ''russian risk'' is important for the international petroleum companies, in spite of the creation of the TNK-BP joint venture. The investment in the petroleum domain face different and contradictory interests in function of the economic implied actors. To analyze the situation the author discussed the russian petroleum industry as an ''unfinished model'', and how the place for the international investments is limited. (A.L.B.)

  4. Taking place, screening place

    DEFF Research Database (Denmark)

    Hansen, Kim Toft; Waade, Anne Marit

    2019-01-01

    We introduce location studies as a new empirical approach to screen studies. Location studies represent an interdisciplinary perspective, including media, aesthetics and geography, and reflect a growing interest in places in a global media and consumption culture. The chapter analyses two recent......) with one being traditional and the other being commercial; both dramas include discussions of localities and social heritage, and both use local sports as a common metaphor for social cohesion; and both series have been partly funded by a local film Danish commissioner. However, The Legacy is shot...... to a large extent in studios, while Norskov is shot entirely on location. The study is based on interviews with producers, broadcasters, location scouts, production designers and writers, as well as quantitative and qualitative textual analyses of television drama series, the geographical places, and related...

  5. Mass and heat transfers in injecting-condensers; Transfert de masse et de chaleur dans les injecteurs-condenseurs

    Energy Technology Data Exchange (ETDEWEB)

    Mikasser, S.

    2004-02-15

    This study develops a physic and thermodynamic investigation of the condensing-injector that allow understanding the assumption of operating and the various physics phenomena intervening. Then, an experimental study concerning the small size condensing-injector was proposed. Lastly, the modelling of the flows were approached in two forms: a total modelling 0D of the condensing-injector and a modelling 1D of the mixing chamber. Thus, tree analytical formulations were employed for distinct flow patterns in the mixing chamber. The first part (heterogeneous flow) is a two-phase flow model based on a system in 6 equations of transport coupled with an equation of the witness fraction. The second part (scattered flow) resumes the homogeneous mode that composed of 3 equations of transport. The occurrence of shock phenomena is possible in the throat of the mixing chamber; so the analytical formulation of the condensation shock is described according to conditions shock that based on the balance equations. All these models are validated using the experimental results. (author)

  6. Study of heat flux deposition in the Tore Supra Tokamak; Etude des depots de chaleur dans le tokamak Tore Supra

    Energy Technology Data Exchange (ETDEWEB)

    Carpentier, S.

    2009-02-15

    Accurate measurements of heat loads on internal tokamak components is essential for protection of the device during steady state operation. The optimisation of experimental scenarios also requires an in depth understanding of the physical mechanisms governing the heat flux deposition on the walls. The objective of this study is a detailed characterisation of the heat flux to plasma facing components (PFC) of the Tore Supra tokamak. The power deposited onto Tore Supra PFCs is calculated using an inverse method, which is applied to both the temperature maps measured by infrared thermography and to the enthalpy signals from calorimetry. The derived experimental heat flux maps calculated on the toroidal pumped limiter (TPL) are then compared with theoretical heat flux density distributions from a standard SOL-model. They are two experimental observations that are not consistent with the model: significant heat flux outside the theoretical wetted area, and heat load peaking close to the tangency point between the TPL and the last closed field surface (LCFS). An experimental analysis for several discharges with variable security factors q is made. In the area consistent with the theoretical predictions, this parametric study shows a clear dependence between the heat flux length lambda{sub q} (estimated in the SOL (scrape-off layer) from the IR measurements) and the magnetic configuration. We observe that the spreading of heat fluxes on the component is compensated by a reduction of the power decay length lambda{sub q} in the SOL when q decreases. On the other hand, in the area where the derived experimental heat loads are not consistent with the theoretical predictions, we observe that the spreading of heat fluxes outside the theoretical boundary increases when q decreases, and is thus not counterbalanced. (author)

  7. The role of brachytherapy in the definitive management of prostate cancer; Place de la curietherapie dans le traitement du cancer prostatique localise

    Energy Technology Data Exchange (ETDEWEB)

    Crook, J. [British Columbia Cancer Agency, Center for the Southern Interior, 399, Royal Avenue, Kelowna, British Columbia, V1Y 5L33 (Canada)

    2011-06-15

    Over the past two decades, brachytherapy has played an ever expanding role in the definitive radiotherapy of prostate cancer. Brachytherapy surpasses external beam radiotherapy in its ability to deliver intense intra-prostatic dose escalation. Although initially low dose rate permanent seed brachytherapy was favored for favorable risk prostate cancers, and high dose rate temporary brachytherapy for intermediate and advanced disease, both types of brachytherapy now have a place across all the risk groups of localized prostate cancer. This article will review indications and patient selection, planning and technical aspects, toxicity and efficacy for both low and high dose rate prostate brachytherapy. (author)

  8. Échangeur de chaleur et de matière à paroi poreuse. Application en récupération sur fumées Porous Heat and Mass Exchanger for Recovery from Flue Gases

    Directory of Open Access Journals (Sweden)

    Brunel G.

    2006-11-01

    Full Text Available L'optimisation technico-économique des procédés industriels requiert de nouvelles techniques assurant un meilleur rendement énergétique et une protection accrue de l'environnement. Parmi celles-ci, l'échangeur de chaleur et de matière à parois poreuses proposé par l'Institut Français du Pétrole (IFP est destiné aux opérations de séparation de mélanges gazeux contenant au moins un produit condensable. La première application assurée par Chaudières Seccacier SA concerne le chauffage au gaz industriel ou collectif. Le procédé consiste à effectuer le transfert de chaleur et d'eau entre fumées et air de combustion à travers une paroi poreuse qui assure la séparation des deux fluides par le film d'eau retenu par capillarité dans ses pores. Après la phase probatoire qui a concerné une chaudière de 200 kW, le développement en cours, avant la diffusion commerciale, s'effectue sur des chaudières de 500 kW. Le rendement énergétique est accru de 5 à 10 % si l'on se réfère aux chaudières à condensation, ce qui induit une réduction des émissions de CO2 de 20 à 50 % selon les installations et l'énergie déplacée. La réduction des émissions de NOx imputable à l'utilisation d'un air comburant saturé d'eau est de 65 % environ. The increase in the energy efficiency of processes is now a constant preoccupation that is included in all procedures aiming for the technico-economic optimization of industrial production. This trend is leading to the designing of systems integrating several simultaneous functions : chemical reaction, separation and heat transfer. In addition to the energy increase there is often a reduction in the bulk of installations, an improvement in reliability and better control of how the process operates. The porous-wall heat and mass exchanger (ECMP proposed by Institut Français du Pétrole (IFP for this purpose, which is covered by a basic patent, aims to separate gaseous mixtures containing at

  9. La relation entre enseignant-expert et apprenant(s : quelle issue à la transgression des places dans l’interaction didactique ?

    Directory of Open Access Journals (Sweden)

    Laura Nicolas

    2015-05-01

    Full Text Available Cet article interroge la négociation de la relation interlocutive entre enseignant et apprenants qui prend place à la suite d’interventions apprenantes pouvant être jugées comme transgressives par l’enseignant. On envisage le troisième pôle de la communication didactique, le groupe des pairs, en tant qu’élément d’influence sur la décision de l’enseignant de s’affilier ou, au contraire, de se désaffilier des « propos transgressifs » de l’apprenant. Teachers and learners relationship in the language classroom: the way teachers deal with learners’ overstepping moves Abstract: Through the observation of a teacher’s feedback moves to students’ negotiations which can be interpreted by the teacher as transgressions of the classroom interaction order, we conducted an exploration of his or her tendency to meet both the negotiator and his or her peers’ needs. The results will show that the presence of the group indeed influenced teacher’s affiliation or disaffiliation from students’ overstepping moves.

  10. F.D.G.-PET scanning in managing patients with lymphoma; La place de la TEP au FDG dans l'evaluation des lymphomes

    Energy Technology Data Exchange (ETDEWEB)

    Bodet-Milin, C.; Kraeber-Bodere, F. [CHU de Nantes, Service de Medecine Nucleaire, Hotel-Dieu, 44 - Nantes (France); Salaun, P.Y. [CHU de Brest, Service de Medecine Nucleaire, 29 - Brest (France); Crespin, C.; Vuillez, J.P. [CHU de Grenoble, Service de Medecine Nucleaire, 38 - Grenoble (France); Kraeber-Bodere, F. [Centre Rene-Gauducheau, Service de Medecine Nucleaire, 44 - Saint-Herblain (France); CRCNA, Inserm UMR 892, 44 - Nantes (France)

    2009-08-15

    The place of positron emission tomography (PET) in the evaluation of diffuse at big cells B lymphomas and hodgkin lymphomas is validated. The clinical impact of the PET registered in end of therapy development is indisputable. recommendations must be followed for images interpretation. The PET is strongly recommended during the first evaluation of the disease because it is a reference examination that makes easy the interpretation at the end of the therapy and allows to evaluate the extension of the disease with a sensitivity and a specificity superior to the computerized tomography. the prognosis value of intermediate evaluations appears certain in the diffuse at big cells B lymphomas and the hodgkin lymphomas but the impact of an early therapy change induced by PET is still to determine. The criteria of interpretation of early evaluations are to standardize. for the other types of lymphomas, the PET can have an interest to confirm the the localized stages, especially for the follicular lymphomas and direct the biopsy for a patient ill of a low range lymphoma suspect of aggressive change. (N.C.)

  11. The effect of the substitution of D{sub 2}O for H{sub 2}O on the degradation of myosin {beta} in solution by heat and by {sup 60}Co {gamma} radiation (1962); Effet de la substitution de D{sub 2}O a H{sub 2}O sur l'alteration de la Myosine B en solution par la chaleur et par les rayons {gamma} du {sup 60}CO (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Pinset-Harstrom, I.; Fritsch, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    (1) Alterations of myosin B produced by heat or irradiation are shown to be qualitatively identical as demonstrated by analytical centrifugation. (2) A considerable isotope effect was demonstrated using 75 per cent D{sub 2}O in the solvent. The sensitivity of myosin B to heat and irradiation is discussed in the light of this isotope effect. (3) Polymers appearing upon heat treatment of myosin B seem to be of a very different nature than the polymers occurring alter a similar treatment upon myosin A. Polymers obtained from myosin B can be depolymerized by ATP and they appear in a much narrower temperature range than myosin A polymers. This fact indicates a considerable difference in the activation enthalpies in the two reactions. (authors) [French] (1) Cette etude montre que les alterations de la myosine B provoquees par la chaleur et par l'irradiation aux rayons {gamma} sont - telles qu'elles apparaissent a l'ultracentrifugation analytique - qualitativement semblables. (2) Nous avons observe un effet isotopique considerable de la presence de 75 pour cent de D{sub 2}O dans le solvant sur la sensibilite de la myosine B envers ces deux agents, et nous avons presente une tentative d'explication de ce fait. (3) Les polymeres qui apparaissent apres un traitement par la chaleur de la myosine semblent etre d'une nature tres differente des polymeres que l'on voit apparaitre apres un traitement identique de la myosine A. Ceux obtenus a partir de le myosine B sont depolymerisables par l'intermediaire de l'ATP et apparaissent dans une zone de temperature beaucoup plus etroite que celles de la myosine A. Ce dernier fait indique une difference considerable de l'enthalpie d'activation des deux reactions. (auteurs)

  12. The effect of the substitution of D{sub 2}O for H{sub 2}O on the degradation of myosin {beta} in solution by heat and by {sup 60}Co {gamma} radiation (1962); Effet de la substitution de D{sub 2}O a H{sub 2}O sur l'alteration de la Myosine B en solution par la chaleur et par les rayons {gamma} du {sup 60}CO (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Pinset-Harstrom, I; Fritsch, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1962-07-01

    (1) Alterations of myosin B produced by heat or irradiation are shown to be qualitatively identical as demonstrated by analytical centrifugation. (2) A considerable isotope effect was demonstrated using 75 per cent D{sub 2}O in the solvent. The sensitivity of myosin B to heat and irradiation is discussed in the light of this isotope effect. (3) Polymers appearing upon heat treatment of myosin B seem to be of a very different nature than the polymers occurring alter a similar treatment upon myosin A. Polymers obtained from myosin B can be depolymerized by ATP and they appear in a much narrower temperature range than myosin A polymers. This fact indicates a considerable difference in the activation enthalpies in the two reactions. (authors) [French] (1) Cette etude montre que les alterations de la myosine B provoquees par la chaleur et par l'irradiation aux rayons {gamma} sont - telles qu'elles apparaissent a l'ultracentrifugation analytique - qualitativement semblables. (2) Nous avons observe un effet isotopique considerable de la presence de 75 pour cent de D{sub 2}O dans le solvant sur la sensibilite de la myosine B envers ces deux agents, et nous avons presente une tentative d'explication de ce fait. (3) Les polymeres qui apparaissent apres un traitement par la chaleur de la myosine semblent etre d'une nature tres differente des polymeres que l'on voit apparaitre apres un traitement identique de la myosine A. Ceux obtenus a partir de le myosine B sont depolymerisables par l'intermediaire de l'ATP et apparaissent dans une zone de temperature beaucoup plus etroite que celles de la myosine A. Ce dernier fait indique une difference considerable de l'enthalpie d'activation des deux reactions. (auteurs)

  13. Thermal and hydrodynamic study of a whirling liquid hydrogen layer under high heat flux; Etude thermique et hydrodynamique d'une couche tourbillonnaire d'hydrogenen liquide sous flux de chaleur eleve

    Energy Technology Data Exchange (ETDEWEB)

    Ewald, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-03-01

    In order to achieve a cold neutrons source ({lambda} {>=} 4.10{sup -10} m) in a high flux reactor ({approx} 10{sup 15} neutrons/cm{sup 2}.s), a whirling liquid hydrogen layer (145 mm OD, effective thickness 15 mm, height about 180 mm) was formed, out-of-pile, in a cylindrical transparent glass vessel. The whirling motion was obtained by tangential injection of the liquid, near the wall. Thermal and hydrodynamical conditions of formation and laws of similarity of such a layer were studied. The characteristics of this whirling flow were observed as a function of mass flow rate (5 to 27 g/s; 4.3 to 23 l/mn), and of spillway width (18 and 25 mm). Six different nozzles were used : 1.0; 1.5; 1.9; 2.25; 2.65 and 3.0 mm ID. The total heat influx was found between 8.6 and 10.4 kW. The heat flux density was about 9.4 W/cm{sup 2} and the mean layer density around 80 per cent of that of the liquid hydrogen at 20.4 Kelvin. High speed movies were used to analyze the boiling regime. (author) [French] En vue de realiser une source de neutrons froids ({lambda} {>=} 4.10{sup -10} m) dans un reacteur a haut flux ({approx} 10{sup 15} neutrons thermiques/cm{sup 2}.s), on a forme dans un vase cylindrique transparent en verre, hors-pile, une couche tourbillonnaire ('vortex') d'hydrogene liquide (diametre exterieur 145 mm, epaisseur effective 15 mm, hauteur 180 mm environ). Le mouvement giratoire est obtenu par injection tangentielle du liquide pres de la paroi. L'etude porte sur la determination des conditions thermiques et hydrodynamiques de la formation d'une telle couche et sur les regles de similitude de ce phenomene. On a observe les caracteristiques de l'ecoulement giratoire en fonction du debit (de 5 a 27 g/s, soit de 4.3 a 23 1/mn), de la vitesse d'injection (entre 10 et 110 m/s) et de la largeur du deversoir (18 et 25 mm), ceci pour six diametres differents d'injecteur (1.0 ; 1.5; 1.9; 2.25; 2.65 et 3.0 mm). Le flux de chaleur total mesure

  14. Thermal and hydrodynamic study of a whirling liquid hydrogen layer under high heat flux; Etude thermique et hydrodynamique d'une couche tourbillonnaire d'hydrogenen liquide sous flux de chaleur eleve

    Energy Technology Data Exchange (ETDEWEB)

    Ewald, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1968-03-01

    In order to achieve a cold neutrons source ({lambda} {>=} 4.10{sup -10} m) in a high flux reactor ({approx} 10{sup 15} neutrons/cm{sup 2}.s), a whirling liquid hydrogen layer (145 mm OD, effective thickness 15 mm, height about 180 mm) was formed, out-of-pile, in a cylindrical transparent glass vessel. The whirling motion was obtained by tangential injection of the liquid, near the wall. Thermal and hydrodynamical conditions of formation and laws of similarity of such a layer were studied. The characteristics of this whirling flow were observed as a function of mass flow rate (5 to 27 g/s; 4.3 to 23 l/mn), and of spillway width (18 and 25 mm). Six different nozzles were used : 1.0; 1.5; 1.9; 2.25; 2.65 and 3.0 mm ID. The total heat influx was found between 8.6 and 10.4 kW. The heat flux density was about 9.4 W/cm{sup 2} and the mean layer density around 80 per cent of that of the liquid hydrogen at 20.4 Kelvin. High speed movies were used to analyze the boiling regime. (author) [French] En vue de realiser une source de neutrons froids ({lambda} {>=} 4.10{sup -10} m) dans un reacteur a haut flux ({approx} 10{sup 15} neutrons thermiques/cm{sup 2}.s), on a forme dans un vase cylindrique transparent en verre, hors-pile, une couche tourbillonnaire ('vortex') d'hydrogene liquide (diametre exterieur 145 mm, epaisseur effective 15 mm, hauteur 180 mm environ). Le mouvement giratoire est obtenu par injection tangentielle du liquide pres de la paroi. L'etude porte sur la determination des conditions thermiques et hydrodynamiques de la formation d'une telle couche et sur les regles de similitude de ce phenomene. On a observe les caracteristiques de l'ecoulement giratoire en fonction du debit (de 5 a 27 g/s, soit de 4.3 a 23 1/mn), de la vitesse d'injection (entre 10 et 110 m/s) et de la largeur du deversoir (18 et 25 mm), ceci pour six diametres differents d'injecteur (1.0 ; 1.5; 1.9; 2.25; 2.65 et 3.0 mm). Le flux de chaleur total mesure est compris entre 8.6 et 10.4 kW et la

  15. Specific heat measurements on metals up to their melting point; Mesure de la chaleur specifique des metaux jusqu'a leur temperature de fusion

    Energy Technology Data Exchange (ETDEWEB)

    Affortit, Ch [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1967-07-15

    We have built an apparatus to measure the specific heat of metal up to the melting point. The method is the pulse-heating method, where the specimen is heated very rapidly (1/10 s) from room temperature to the melting point by a very intense d.c. current (1000 A). The simultaneous measurements of intensity, voltage and temperature in the specimen allows a calculation of the specific heat. We have obtained good results for niobium, tungsten, tantalum and uranium. The accuracy is around 3 to 5 per cent and allows a measurement of the heat of formation of vacancies near the melting temperature. (author) [French] Nous avons construit un appareil permettant la mesure de la chaleur specifique des metaux jusqu'a leur temperature de fusion. La methode utilisee est la methode dite de chauffage instantane, L'echantillon est echauffe tres rapidement (1/10 s) de la temperature ambiante a la temperature de fusion par le passage d'un courant tres intense ({approx} 1000 A). L'enregistrement simultane de l'intensite du courant, de la difference de potentiel aux bornes de l'echantillon et de la temperature, permet de calculer la chaleur specifique. Nous avons obtenu de bons resultats pour le niobium, le tungstene tantale et l'uranium. La precision de la methode est de l'ordre de 3 a 5 pour cent et permet une mesure de la chaleur de formation des lacunes au voisinage de la fusion. (auteur)

  16. Children's Places

    DEFF Research Database (Denmark)

    Using a cross-cultural approach the book investigates children's places in different societies. "Children's Places" examines the ways in which children and adults, from their different vantage-points in society, negotiate proper places of children in both social and spatial terms. It looks at some...

  17. Utilisation des structures géotechniques pour l’extraction d’énergie dans les routes

    OpenAIRE

    Dupray, Fabrice; Minon, Sophie; Schurmann, Clémentine Eléonore; Laloui, Lyesse

    2010-01-01

    Les géostructures énergétiques ont vu un important développement depuis leurs premières réalisations au début des années 1980. Elles permettent par la circulation d’un fluide caloporteur dans des parois enterrées ou des pieux une forte récupération d’énergie géothermique de surface pour un coût modique (pompe à chaleur). Une des pistes de développement les plus récentes consiste à étendre leur usage à de nouveaux ouvrages enterrés, que l’on rencontre dans le cas des tunnels, ou à de nouveaux ...

  18. Place Branding

    DEFF Research Database (Denmark)

    Medway, Dominic; Swanson, Kathryn; Neirotti, Lisa Delpy

    2015-01-01

    Purpose: – The purpose of this paper is to report on a special session entitled “Place branding: Are we wasting our time?”, held at the American Marketing Association’s Summer Marketing Educators’ conference in 2014. Design/methodology/approach: – The report details the outcome of an Oxford......: – The outcome of the debate points towards a need for place brands to develop as more inclusive and organic entities, in which case it may be best for place practitioners to avoid creating and imposing a place brand and instead help shape it from the views of stakeholder constituencies. This shifts the notion...... of place branding towards an activity centred on “curation”. Originality/value: – The use of a competitive debating format as a means for exploring academic ideas and concepts in the place management field....

  19. Thin Places

    OpenAIRE

    Lockwood, Sandra Elizabeth

    2013-01-01

    This inquiry into the three great quests of the twentieth century–the South Pole, Mount Everest, and the Moon–examines our motivations to venture into these sublime, yet life-taking places. The Thin Place was once the destination of the religious pilgrim seeking transcendence in an extreme environment. In our age, the Thin Place quest has morphed into a challenge to evolve beyond the confines of our own physiology; through human ingenuity and invention, we reach places not meant to accommod...

  20. Better Place

    DEFF Research Database (Denmark)

    Rask, Morten; Bakke, Nikolas; Lindhøj, Jan

    Better Place is trying to reshape the automotive industry by shifting transportation from a dependency on oil to a reliance on environmentally friendly renewable energy. Better Place is developing an extensive infrastructure system that will utilise overcapacity in the production of wind power...... among others and that will drive the global transportation industry to becoming driven by electric vehicles (EVs). Better Place does this by selling its customers 'mileage' and a car without a battery. The case highlights the internationalisation process of Better Place from an international business...... perspective in order to encourage a discussion and debate about how Better Place can make their grand vision a reality in the future by overcoming the obstacles that historically have been challenging the rise of the EV industry. The case includes a historical background of the EV industry by using Denmark...

  1. Heats of formation of chlorine fluorides; Chaleurs de formation des fluorures de chlore

    Energy Technology Data Exchange (ETDEWEB)

    Barberi, P; Caton, J; Guillin, J; Hartmanshenn, O [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    The enthalpies of formation of the chlorine fluorides ClF, ClF{sub 3} and ClF{sub 5} have been determined by combustion calorimetry in hydrogen. They have the respective values, 13.9, 37.2 and 57.2 Kcals.mole. Two bomb calorimeters with differing principles (high-frequency spark bomb and double compartment bomb) have been developed for this purpose. (authors) [French] Les enthalpies de formation des fluorures de chlore ClF, ClF{sub 3} et ClF{sub 5} ont ete determinees par calorimetrie de combustion dans l'hydrogene. Elles sont respectivement de 13.9, 37.2 et 57.2 Kcal.mole. Deux bombes calorimetriques de principes differents (bombe a etincelle haute frequence et bombe a double compartiment) ont ete mises au point a cette occasion. (auteurs)

  2. The dynamic behaviour of heat exchangers; Etude du comportement dynamique des echangeurs de chaleur

    Energy Technology Data Exchange (ETDEWEB)

    Fonteray, J; Rozenholc, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1963-07-01

    In order to study the dynamics of nuclear power plants, one needs mathematical models made up of ordinary differential equations. This report deals with models for heat exchangers. These models allow exact evaluations of the temperatures for any steady state. The deformation of the temperature maps during transients is taken into account. To do this, average temperatures are evaluated keeping In mind, on one hand the partial differential equations, on the other hand, the physical phenomenons which are involved. Seven ordinary differential equations at most, are necessary for one heat exchanger. Theses models were compared with mathematically exact ones and also with experimental results, that EDF was able to measure on EDF-1 heat exchangers. The results appear to be correct. (authors) [French] Les etudes de dynamique sur les centrales nucleaires exigent l'elaboration de modeles apparaissant sous forme d'equations differentlelles ordinaires. Ce rapport est consacre a la recherche de modeles d'echangeurs. Dans ces modeles les temperatures sont calculees exactement pour n'importe quel regime permanent. Pour tenir compte de la deformation des distributions de temperature en regime transitoire, on evalue les temperatures moyennes dans l'echangeur en s'appuyant, d'une part, sur les equations aux derivees partielles et, d'autre part, sur une analyse des phenomenes physiques. Les modeles contiennent au plus sept equations differentielles ordinaires. Ces modeles ont ete compares aux modeles mathematiques exacts et aussi a des resultats experimentaux, obtenus par l'EDF, sur les echangeurs d'EDF-1. Les resultats paraissent satisfaisants. (auteurs)

  3. Healthy Places

    Centers for Disease Control (CDC) Podcasts

    Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.

  4. Place (National)

    Data.gov (United States)

    Department of Transportation — This map layer includes cities and towns in the United States, Puerto Rico, and the U.S. Virgin Islands (NTAD). A city or town is a place with a recorded population,...

  5. Technical training - Places available

    CERN Multimedia

    2003-01-01

    * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Des places sont disponibles dans les cours suivants : Places are available in the following courses: Hands-on Introduction to Python Programming 12 – 14.11.03 (3 days) ACCESS 2000 – niveau 1 13 & 14.11.03 (2 jours) C++ for Particle Physicists 17 – 21.11.03 (6 x 3-hour lectures) Programmation automate Schneider TSX Premium – niveau 2  18 – 21.11.03 (4 jours) Planification de projet avec MS-Project/Project Planning with MS-Project (gratuit/free of charge – langue à définir/language to be defined) : 18 & 25.11.03 (2 jours/2 days) JAVA 2 Enterprise Edition – Part 1 : WEB...

  6. Healthy Places

    Centers for Disease Control (CDC) Podcasts

    2007-04-10

    Every person has a stake in environmental public health. As the environment deteriorates, so does the physical and mental health of the people within it. Healthy places are those designed and built to improve the quality of life for all people who live, work, worship, learn, and play within their borders -- where every person is free to make choices amid a variety of healthy, available, accessible, and affordable options. The CDC recognizes significant health issues and places that are vital in developing the Healthy Places program and provides examples in this report.  Created: 4/10/2007 by CDC National Center for Environmental Health.   Date Released: 4/13/2007.

  7. Designed Places

    DEFF Research Database (Denmark)

    Stender, Marie

    The 2008 financial crisis has left traces in the built environment of Copenhagen like many other places: Building projects are left unfinished or their function or finish is changed due to new economic circumstances. An ethnographic exploration of these traces exposes central aspects of what is a......, and when the ceilings leak water, the residents suspect it to be a consequence of the crisis. The paper discusses how market forces interact with the material surroundings we inhabit and explores the relationship between controlled and uncontrollable in the design of places....

  8. Secret Places.

    Science.gov (United States)

    Ridolfi, Kerry

    1997-01-01

    Argues that children are as deep as the ocean, with secret places inside of them waiting to be opened. Notes that it is powerful for students to learn they can make sense of the world through words, and describes inviting them into poetry as they read poetry, create poetry packets, and write and revise poems. (SR)

  9. Envisioning place

    DEFF Research Database (Denmark)

    Schmidt, Garbi; Glick Schiller, Nina

    2016-01-01

    together, the articles contribute to an emerging relational social science by approaching urban sociabilities through four interrelated parameters: (1) a concept of place-making situated within trajectories of differential and multiscalar power; (2) a discursive analysis of narratives and silences...

  10. S. T. Coleridge, Confessions of an Inquiring Spirit (1840: Its Place in the History of Biblical Criticism Confessions of an Inquiring Spirit (1840 de S. T. Coleridge : sa place dans l’histoire de la critique biblique

    Directory of Open Access Journals (Sweden)

    David Jasper

    2009-09-01

    Full Text Available L’ouvrage posthume de S. T. Coleridge, Confessions of an Inquiring Spirit, est trop rarement perçu comme un texte capital dans l’histoire de la critique biblique. S’inscrivant dans la tradition allemande, celle de Lessing en particulier, il présente pourtant une herméneutique critique qui reconnaît l’autorité de la Bible tout en évitant la doctrine de l’inspiration plénière et les dangers de ce que Coleridge appelle la « bibliolâtrie ». Un lien étroit est établi entre la littérature de la Bible et l’œuvre de Shakespeare, lien selon lequel les Écritures révèlent la nature de Dieu et les vérités de la foi chrétienne. Le retentissement des Confessions ne se fit pas ressentir de manière immédiate, mais l’ouvrage est le précurseur de nombreux travaux bien ultérieurs dans le domaine de la critique biblique, dont l’essai de Benjamin Jowett dans Essays and Reviews (1860. Coleridge définit une herméneutique résolument moderne qui définit la Bible comme le Verbe de Dieu mais qui considère aussi « le chariot vivant qui porte (pour nous le trône de l’Humanité Divine ». Dans ses Confessions, Coleridge confirme que les Écritures sont à la fois une grande œuvre littéraire, et, par là-même, un ouvrage théologique sur la révélation religieuse.

  11. Places Connected:

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    This paper argues that development assistance contributed to the globalization of the 20th century by financing truly global networks of people. By focusing on the networks financed by development assistance bound by the national histories of Denmark and Japan, I illustrate how the people who...... experiences of place, however, when it is often the same people who experience many different places? Along with many other so-called donors in the 1950s, Denmark and Japan chose to invest in the education of own and other nationals involved in development and thereby financed personal connections between...... individuals throughout the world. Development assistance , where there are two or three links only between a Bangladeshi farmer, a street child in Sao Paolo and the President of the United States, the Queen of Denmark, or a suburban house wife in Japan, who has never left the Osaka area, but mothered a United...

  12. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 – 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium – niveau 2 : 18 – 21.11.03 (4 jours) JAVA 2 Enterprise Edition – Part 1 : WEB Applications : 20 & ...

  13. Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses : Introduction à Outlook : 19.8.2004 (1 journée) Outlook (short course I) : E-mail : 31.8.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction ...

  14. Micro manometer and pitot tube for measuring the velocity distribution in a natural convection water stream between two vertical parallel plates (1961); Micromano metre et tube de pitot destines a l'exploration du profil de vitesse dans un ecoulement d'eau de convection naturelle entre deux plaques verticales paralleles (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Santon, L; Vernier, Ph [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

    1961-07-01

    For heat transfer studies in certain cases of cooling in swimming-pool type nuclear reactors, a knowledge of the distribution of the velocities between two heating elements is of prime importance. A Pitot tube and a micro-manometer have been developed for making these measurements on an experimental model. (authors) [French] Pour l'etude du transfert de chaleur dans certains cas de refroidissement des reacteurs nucleaires du type piscine, la connaissance de la repartition des vitesses entre deux elements chauffants est primordiale. On a mis au point un tube de Pitot et un micromanometre pour effectuer ces mesures sur une maquette experimentale. (auteurs)

  15. Places available**

    CERN Multimedia

    Places are available in the following courses: Hands-on Introduction to Python Programming: 11-13.08.2003 (3 days) Introduction to the CERN Engineering Data Management System (EDMS): 26.08.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Engineers: 27.08.2003 (1 day) CLEAN-2002 : Travailler en salle blanche : 4.09.2003 (une demi-journée) AutoCAD 2002 - Level 1: 4, 5, 15, 16.09.2003 (2 x 2 days) AutoCAD Mechanical 6 PowerPack : 17, 18, 25, 26.09.2003 et 2, 3.10.2003 (3 x 2 journées, français) AutoCAD 2002 - niveau 1 : 23, 24, 30.09.2003 et 1.10.2003 (2 x 2 journées) Introduction to the CERN Engineering Data Management System (EDMS): 23.09.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Local Administrators: 24-25.09.2003 (2 days) AutoCAD 2002 - niveau 2 : 8 et 10.10.2003 (2 journées) CLEAN-2002: Working in a Cleanroom: 23.10.2003 (half day, p.m.) ** The number of places available may vary. Please check our Web site to find out the current availabili...

  16. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: Hands-on Introduction to Python Programming: 11-13.08.2003(3 days) Introduction to the CERN Engineering Data Management System (EDMS): 26.08.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Engineers: 27.08.2003 (1 day) CLEAN-2002 : Travailler en salle blanche : 4.09.2003 (une demi-journée) AutoCAD 2002 - Level 1: 4, 5, 15, 16.09.2003 (2 x 2 days) AutoCAD Mechanical 6 PowerPack : 17, 18, 25, 26.09.2003 et 2, 3.10.2003 (3 x 2 journées, français) AutoCAD 2002 - niveau 1 : 23, 24, 30.09.2003 et 1.10.2003 (2 x 2 journées) Introduction to the CERN Engineering Data Management System (EDMS): 23.09.2003 (1 day) The CERN Engineering Data Management System (EDMS) for Local Administrators: 24-25.09.2003 (2 days) AutoCAD 2002 - niveau 2 : 8 et 10.10.2003 (2 journées) CLEAN-2002: Working in a Cleanroom: 23.10.2003 (half day, p.m.) ** The number of places available may vary. Please ch...

  17. Media places

    DEFF Research Database (Denmark)

    Linde, Per; Messeter, Jörn

    The impact that ubiquitous wireless network technologies and mobile phones have on our experience of the modern cityscape, has been a driving force in many research projects in recent years. The agendas differ in relation to perspectives, but it seems safe to claim that such technologies are no l......The impact that ubiquitous wireless network technologies and mobile phones have on our experience of the modern cityscape, has been a driving force in many research projects in recent years. The agendas differ in relation to perspectives, but it seems safe to claim that such technologies...... construction of place in the urban setting. The concept of Hertzian space, put forth by Anthony Dunne and others (Dunne, 1999) also carries a dimension of how spaces of wireless communication may be problematized, and how we can criticize cultural phenomena taken for granted through innovative technology. From...... this perspective wireless technology can also be a way of temporarily appropriating places within the city space for a variety of different groups, at times questioning hierarchical structures of ownership of public spaces. These spaces can be said to be hybrid spaces, bringing forth the fundamental question...

  18. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: MATLAB Fundamentals and Programming Techniques (ML01) : 2 & 3.12.03 (2 days) Oracle 8i : SQL : 3 - 5.12.03 (3 days) The EDMS MTF in practice : 5.12.03 (afternoon, free of charge) Modeling Dynamic Systems with Simulink (SL01) : 8 & 9.12.03 (2 days) Signal Processing with MATLAB (SG01) : 11 & 12.12.03 (2 days) The JAVA Programming Language - l...

  19. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: MATLAB Fundamentals and Programming Techniques (ML01) :2 & 3.12.03 (2 days) Oracle 8i : SQL : 3 - 5.12.03 (3 days) The EDMS MTF in practice : 5.12.03 (afternoon, free of charge) Modeling Dynamic Systems with Simulink (SL01) : 8 & 9.12.03 (2 days) Signal Processing with MATLAB (SG01) : 11 & ...

  20. Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) The JAVA Programming Language Level 2 : 11 to 13.1.2004 (3 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW Basics 1 : 22 - 24.3.20...

  1. Places available**

    CERN Document Server

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 :9 & 10.1.2004 (2 days) The JAVA Programming Language Level 2 : 11 to 13.1.2004 (3 days) Hands-on Introduction to Python Programming : 16 - 18.2.2004 (3 days - free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004...

  2. Places available**

    CERN Document Server

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: JAVA 2 Enterprise Edition - Part 1 : WEB Applications : 20 & 21.11.03(2 days) FrontPage 2000 - niveau 1 : 20 & 21.11.03 (2 jours) Oracle 8i : SQL : 3 - 5.12.03 (3 days) Oracle 8i : Programming with PL/SQL : 8 - 10.12.03 (3 days) The JAVA Programming Language - leve...

  3. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project : 15 & 22.1.2004 (2 days) Joint PVSS JCOP Framework Course : 2 sessions : 2 - 6.2.2004 and 16 - 20-2-2004 (5 days) Hands-on Introduction to Python Programming : 16 - 18.2.2004 (3 days - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions)

  4. Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses : EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) The EDMS-MTF in practice (free of charge) :  28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 - Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to Pspice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programm...

  5. PLACES AVAILABLE

    CERN Multimedia

    Enseignement Technique; Tél. 74924; Technical Training; Monique Duval; Tel. 74924

    2000-01-01

    Places available Places are available in the following courses:   LabView hands-on 13.11.00 4 hours LabView Basics 1 14 - 16.11.00 3 days Nouveautés de WORD 19 et 20.10.00 2 jours ACCESS 1er niveau 30 - 31.10.00 2 jours Advanced aspects of the C language 2 - 3.11.00 2 days Introduction to Oracle SQL and PL/SQL 13 - 17.11.00 5 days C++ for Particle Physicists 20 - 24.11.00 6 lectures Develop PL/SQL Program Units 20 - 22.11.00 3 days Oracle Application Server Develop Web-Based Applications with PL/SQL 27 - 28.11.00 2 days Programmation TSX Premium 1 28.11 - 1.12.00 4 jours Programmation TSX Premium 2 12 - 15.12.00 4 jours If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an “application for training” form available from your Divisional Secretariat or from your DTO (Divisional Training Offi...

  6. Intérêts de mettre en place une filière courte basée sur la culture du jatropha (Jatropha curcas L. dans la communauté rurale de Dialacoto

    Directory of Open Access Journals (Sweden)

    DGD

    2012-01-01

    Full Text Available Interests of establishing a local chain of production and marketing based on the cultivation of jatropha (Jatropha curcas L. in the rural community of Dialacoto (Tambacouda Region, Eastern Senegal. Cette étude nous démontre des facteurs variables qui influent sur l'adoption de l'engrais et son utilisation optimale parmi les cultivateurs de récolte dans la région agricole d'Abak, située dans l'Etat d'Akwa Ibom au sud du Nigéria. Les données primaires étaient recueillies chez 150 leaders de familles agricultrices qui ont des récoltes arables dans le territoire d'étude. Un modèle indépendant "double hurdle" était utilisé pour analyser les objectifs de cette étude sur l'hypothèse que l'adoption et l'utilisation optimale d'engrais par les sondés étaient les deux décisions indépendantes influencées par différents facteurs. Les estimations empiriques du "first hurdle" nous montrent que la taille de famille, la taille de ferme, le prix discerné de l'engrais, les années d'existence des entreprises agricoles, la valeur de production agricole, des visites de l'agent d'extension agricole, le nombre de chèvres et de moutons chez les fermiers, la décision d'avoir de la volaille sont statiquement des décisions fondamentales variables qui ont influencé la probabilité d'adopter l'engrais par les leaders de familles agricultrices dans le territoire d'étude. Les estimations du "second hurdle" ont révélé que, la décision d'adopter l'intensité optimale d'engrais par les leaders de familles agricultrices était influencée par l'âge, le sexe, la taille de ferme, l'objectif de production de récolte, le prix perçu d'engrais, la valeur de récolte, le nombre de chèvres et de moutons gardé par les sondés, et la proximité au marché d'engrais. Pour encourager l'adoption de l'engrais et son utilisation optimale, le prix d'engrais doit être encore subsidié et le bureau d'extension agricole de l'Etat renforcé pour sensibiliser

  7. Place identity and place scale: the impact of place salience.

    OpenAIRE

    Bernardo, Fátima; Palma-Oliveira, José-Manuel

    2013-01-01

    Research about place, place identity and attachment supports the idea that bonds with places may differ depending on the place scale. Based on the view that identity is context-dependent, this paper brings to the table the impact of manipulating the salience of place on the intensity of place identity and place attachment reported. A study was designed to examine place identity and place attachment in two groups of residents (permanent and temporary) at three different scales (nei...

  8. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction to Databases :  3 - 4.7.01 (2 days) The JAVA programming language Level 2 : 4 - 6.7.01 (3 days) Enterprise JavaBeans :  9 - 11.7.01 (3 days) Design Patterns :  10 - 12.7.01 (3 days) C++ for Particle Physicists :  23 - 27.7.01 (6 3-hour lectures) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.

  9. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction to Perl 5 : 2 - 3.7.01 (2 days) Introduction to Databases :  3 - 4.7.01 (2 days) JAVA programming language Level 2 : 4 - 6.7.01 (3 days) Enterprise JavaBeans :  9 - 11.7.01 (3 days) Design Patterns :  10 - 12.7.01 (3 days) C++ for Particle Physicists :  23 - 27.7.01 (6 3-hour lectures) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.

  10. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: CLEAN-2002 : Travailler en salle blanche (cours gratuit) : 13.08.2002 (matin) Introduction to the CERN Enginnering Data Management System :  27.8.02  (1 day) The CERN Engineering Data Management System for Advanced Users :  28.8.02  (1 day) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval Tel.74924 monique.duval@cern.ch    

  11. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: C++ Programming Level 2 - Traps & Pitfalls:  16 - 19.7.02 (4 days) Frontpage 2000 - level 1 :  22 - 23.7.02  (2 days) Introduction à Windows 2000 au CERN : 24.7.02 (après-midi) CLEAN-2002 : Travailler en salle blanche (cours gratuit) : 13.08.2002 (matin) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval Tel.74924 monique.duval@cern.ch

  12. Placing knowledge

    DEFF Research Database (Denmark)

    Adriansen, Hanne Kirstine; Valentin, Karen; Nielsen, Gritt B.

    ; on the other hand, the rationale for strengthening mobility through internationalisation is based on an imagination of the potentials of particular locations (academic institutions). Intrigued by this tension between universality and particularity in academic knowledge production, this paper presents...... preliminary findings from a project that study internationalisation of higher education as an agent in the interrelated processes of place-making and knowledge-making. The project is based on three case-studies. In this paper, focus is on PhD students’ change of research environment. This is used as a case......Internationalisation of higher education is premised by a seeming paradox: On the one hand, academic knowledge strives to be universal in the sense that it claims to produce generalizable, valid and reliable knowledge that can be used, critiqued, and redeveloped by academics from all over the world...

  13. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: December 2002   PCAD Schémas - Débutants :  5 & 6.12.02  (2 jours) PCAD PCB - Débutants :  9 - 11.12.02  (3 jours) FrontPage 2000 - level 1:  9 & 10.12.02  (2 days) Introduction à la CAO Cadence (cours gratuit) :  10 & 11.12.02  (2 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval Tel.74924 monique.duval@cern.ch

  14. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    Le nombre de places disponibles peut varier. Veuillez consulter notre site Web pour avoir la dernière mise à jour. Des places sont disponibles dans les cours suivants :   Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (...

  15. Places available **

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: PIPES-2003 - Pratique du Sertissage de tubes métalliques et multicouches : 26.8.03 (stage pratique) The CERN Engineering Data Management System (EDMS) for Engineers : 27.8.03 (1 day, free of charge) CLEAN-2002 : Travailler en salle blanche : 4.9.03 (une demi-journée, séminaire gratuit) The CERN Engineering Data Management System (EDMS) for Local Administrators : 24 & 25.9.03 (2 days, free of charge) Siemens SIMATIC Training : Programmation STEP7 - niveau 1 : 29 - 2.10.03 (4 jours) - ouverture des inscriptions fin août Programmation STEP7 - niveau 2 : 13 - 17.10.03 (5 jours) - ouverture des inscriptions fin août Réseau Simatic Net : 22 & 23.10.03 (2 jours) - ouverture des inscriptions fin août CLEAN-2002 : Working in a Cleanroom : 23.20.03 (half day, free of charge) These courses will be given in French or Englis...

  16. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabView Hands-on (bilingue/bilingual - gratuit/free of charge) : 13.9.02 (a.m.) LabView DAQ Hands-on (bilingue/bilingual - gratuit/free of charge) : 13.9.02 (p.m.) AutoCAD 2002 - niveau 1 : 19, 20, 26, 27.9.02 (4 jours) LabView Base 1 : 23 - 25.9.02 (3 jours) LabView DAQ (E) : 26 - 27.9.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 30.9, 1, 2, 9, 10, 11.10.02 (6 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 10.10.02 (half-day, p.m.) AutoCAD 2002 - niveau 2 : 14 - 15.10.02 (2 jours) AutoCAD 2002 - Level 1 : 17, 18, 24, 25.10.02 (4 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Of...

  17. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) AutoCAD 2002 - niveau 2 :  14 - 15.10.02  (2 jours) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD 2002 - Level 1:  17, 18, 24, 25.10.02  (4 days) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS/Introduction to ANSYS (langue à définir suivant demande/ Language to be chosen according to demand):  21 - 25.10.02  (5 jours/days) HREF-2002: Helium Refrigeration Techniques (English-French, bilingual) :  21 - 25.10.2002  (7 half days) HREF-2002: Techniques de la Réfri...

  18. Places available**

    CERN Document Server

    2003-01-01

    Places are available in the following courses : The CERN EDMS for Local Administrators : 24 & 25.9.03 (2 days, free of charge) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom : 23.10.03 (half day, free of charge) AutoCAD 2002 - Level 1 : 3, 4, 12, 13.11.03 (4 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) AutoCAD Mechanical 6 PowerPack (E) : 17, 18, 24, 25.11 & 1, 2.12.03 (6...

  19. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction à DesignSpace :  16.10.02  (1 journée) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS 21 - 25.10.02  (5 jours/days) HREF-2002: Helium Refrigeration Techniques (English-French, bilingual) :  21 - 25.10.2002  (7 half days) LabVIEW Basics 1 (English):  21 - 23.10.02  (3 days) LabVIEW Basics 2 (English):  24 & 25.10.02  (2 days) Oracle 8i : Access the Database with Java:  7 & 8.11.02  (2 days) AutoCAD 2002 - niveau 2 :  7 & 8.11.02  (2 jours) AutoCAD 2002 - Level 1:  14, 15, 21, 22.11.02  (4 days) LabVIEW - Advanced (English) :  18 - 20.11.2002  (3 days) AutoCAD 2002 - niveau 1 :  19, 20, 25, 26.11.02 (4 jours) Oracle iDS Designer: First Class:&...

  20. Places available**

    CERN Document Server

    2003-01-01

    Places are available in the following courses: CLEAN-2002 : Travailler en salle blanche (séminaire gratuit) : 4.9.03 (une demi-journée) The CERN EDMS for Local Administrators (free of charge) : 24 & 25.9.03 (2 days) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) AutoCAD Mechanical 6 PowerPack (E) : 23, 24, 30, 31.10 & 12, 13.11.03 (6 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours)...

  1. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: The CERN EDMS for Local Administrators : 24 & 25.9.03 (2 days, free of charge) HeREF-2003 : Techniques de la réfrigération Hélium cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom : 23.10.03 (half day, free of charge) AutoCAD 2002 - Level 1 : 3, 4, 12, 13.11.03 (4 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) AutoCAD Mechanical 6 PowerPack (E) : 17, 18, 24, 25.11 & 1, 2.12.03 (6 days) FrontPage 2000 - niveau 1 : 20 & 21.11.03 (2 jours) MAGNE-03 : Magnétisme pour l'électrotechnique : 25 - 27.11.03 (3 jours) ...

  2. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabView hands-on (bilingue/bilingual): 5.11.02 (matin/morning) LabView DAQ hands-on (bilingue/bilingual):  5.11.02  (après-midi afternoon) Introduction au PC et Windows 2000 au CERN:  6 & 7.11.02  (2 jours) Oracle 8i : Access the Database with Java:  7 & 8.11.02  (2 days) AutoCAD 2002 - niveau 2:  7 & 8.11.02  (2 jours) Introduction to PVSS (free of charge):  11.11.2002 pm  (1/2 day) Basic PVSS:  12 - 14.11.02  (3 days) EXCEL 2000 - niveau 1:  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free of charge):  13.11.2002  (afternoon) LabView Base 1 :  13 - 15.11.02  (3 jours) AutoCAD 2002 - Level 1:  14, 15, 21, 22.11.2002  (4 days) LabVIEW - Advanced:  18 - 20.11.02  (3 days) Auto...

  3. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: PIPES-2003 - Pratique du sertissage de tubes métalliques et multicouches :26.8.03(stage pratique) The CERN EDMS for Engineers (free of charge) : 27.8.03 (1 day) CLEAN-2002 : Travailler en salle blanche (séminaire gratuit) : 4.9.03(une demi-journée) The CERN EDMS for Local Administrators (free of charge) : 24 & 25.9.03 (2 days) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) AutoCAD Mechanical 6 PowerPack (E) : 23, 24, 30, 31.10 & 12, 13.11.03 (6 days) AutoCAD 2002 - niveau 2...

  4. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses: The CERN EDMS for Local Administrators (free of charge) : 24 & 25.9.03 (2 days) HeREF-2003 : Techniques de la réfrigération Hélium (cours en français avec support en anglais) : 6 - 10.10.2003 (7 demi-journées) The Java Programming Language Level 1 : 6 - 7.10.2003 (2 days) Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) AutoCAD 2002 - niveau 1 : 20, 21, 27, 28.10.03 (4 jours) CLEAN-2002 : Working in a Cleanroom (free of charge) : 23.10.03 (half day) AutoCAD Mechanical 6 PowerPack (E) : 23, 24, 30, 31.10 & 12, 13.11.03 (6 days) AutoCAD 2002 - niveau 2 : 10 & 11.11.03 (2 jours) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) FrontPage 2000 - niveau 1 : 20...

  5. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: October 2002   Introduction to the CERN Engineering Data Management System (free of charge):  29.10.2002  (1 day) The CERN EDMS for Advanced users (free of charge):  30.10.2002  (1 day) November 2002   LabView hands-on (bilingue/bilingual): 5.11.02 (matin/morning) LabView DAQ hands-on (bilingue/bilingual):  5.11.02  (après-midi afternoon) Introduction au PC et Windows 2000 au CERN :  6 & 7.11.02  (2 jours) Oracle 8i : Access the Database with Java:  7 & 8.11.02  (2 days) AutoCAD 2002 - niveau 2 :  7 & 8.11.02  (2 jours) Introduction to PVSS (free of charge):  11.11.2002 pm  (1/2 day) Basic PVSS:  12 - 14.11.02  (3 days) EXCEL 2000 - niveau 1 :  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free ...

  6. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) LabView Hands-on (bilingue/bilingual) : 10.10.02 (matin/morning) LabView DAQ Hands-on (bilingue/bilingual)  10.10.02 (après-midi /afternoon) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS/Introduction to ANSYS (langue à définir suivant demande/ Language to be chosen according to demand):  21 - 25.10.02  (5 jours/days) HREF-2002: Helium Refrigeration Techniques (English-French, bilingual) :  21 - 25.10.2002  (7 half days) HREF-2002: Techniques de la...

  7. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel 74924

    2002-01-01

    Places are available in the following courses: LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 - 25.1.02 (4 jours) MS-Project 2000 : 24 & 25.01.02 (2 jours) Introduction au PC et à Windows 2000 au CERN : 29 - 30.1.02 (2 jours) LabView Base 1 : 4 - 6.2.02 (3 jours) LabView DAQ (E) : 7 & 8.02.02 (2 days) Hands-on Object-Oriented Design & Programming with Java : 11 - 13.02.02 (3 days) C++ for Particle Physicists : 11 - 15.3.2002 (6 * 3 hour lectures) Cours sur la migration AutoCAD : AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO ...

  8. PLACES AVAILABLE

    CERN Multimedia

    Enseignement Technique; Tél. 74924; Technical Training; Monique Duval; Tel. 74924

    2000-01-01

    Places are available in the following courses : Premiers pas avec votre PC 12 - 15.9.00 (4 demi-journées) WORD 20, 21 et 26, 27.9.2000 (4 jours) JAVA programming level 1 25 - 26.9.2000 (2 days) Gaz inflammables 1 26.9.2000 (1 journée) Advanced aspects of PERL 5 6.10.2000 (1 day) Initiation au WWW 10 - 12.10.00 (3 demi-journées) WORD : importer et manipuler des images 16.10.2000 (1 journée) FileMaker 17, 18 et 24, 25.10.00 (4 jours) Nouveautés de WORD 19 et 20.10.2000 (2 jours) ACCESS 1er niveau 30 - 31.10.00 (2 jours)Introduction à PowerPoint 6.11.00 (1 journée)Nouveautés d’EXCEL 7.11.2000(4 demi-journées)Excel 13, 14 et 20, 21.11.00 (4 jours) LabView hands-on 13.11.2000(4 hours)LabView Basics 1 14 - 16.11.2000 (3 days) MS-Project 1er niveau 14-17.11.00 (4 demi-journées) If you wish to participate in one of these courses, please discuss with your supervisor and apply elec...

  9. PLACES AVAILABLE

    CERN Multimedia

    TECHNICAL TRAINING; Tel. 74460

    2001-01-01

    Places are available in the following courses: MS-Project 1er niveau : 20 - 23.2.01 (4 matins) Architecture d'automatisme : 20 - 21.2.01 (2 jours) Introduction à PowerPoint : 26.2.01 (1 journée) Programmation TSX Premium 1 (Schneider) : 26.2 - 2.3.01 (5 jours) Premiers pas avec votre PC : 27.2 - 2.3.01 (4 matins) C++ for Particle Physicists : 5 - 9.3.01 (6*3 hour lectures) EXCEL : 6, 7 et 13, 14.3.01 (4 jours) The JAVA programming language level 2 :  12 - 14.3.01 (3 days) Nouveautés de FileMaker :  20 - 23.03.01 (4 matins) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt.

  10. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2002-01-01

    Places are available in the following courses: LabView hands-on : 21.01.02 (1/2 journée) LabView DAQ hands-on : 21.01.02 (1/2 journée) FileMaker Pro : 22 - 25.1.02 (4 jours) MS-Project 2000 : 22, 24 & 25.01.02 (3 jours) Introduction au PC et à Windows 2000 au CERN : 29 - 30.1.02 (2 jours) LabView Base 1 : 4 - 6.2.02 (3 jours) LabView DAQ  (E) :  7 & 8.02.02 (2 days) Hands-on Object-Oriented Design & Programming with Java :  11 - 13.02.02 (3 days) PVSS basics :  11 - 15.2.02 (5 days) Introduction à Windows 2000 : 18.2.02 (1 demi-journée) Introduction to the CERN Engineering Data Management System :  20.2.02 (1 day) The CERN Engineering Data Management System for Advanced users :  21.2.02  (1 day) C++ for Particle Physicists :  11 - 15.3.2002  (6 * 3 hour lectures) Cours sur la migration AutoCAD : AutoCAD : Mise à...

  11. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required) : 2.4.03 (half-day, afternoon) LabView base 1/LabView Basics 1 (Langue à définir/ language to be decided) : 9 - 11.4.03 (3 jours/3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03(6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : 3 sessions sont programmées pour 2003 : 25...

  12. Places available **

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required): 11.4.03 (half-day, afternoon, ) LabView Basics 2 : 10 - 11.4.03 (3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6....

  13. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) LabView DAQ (language to be defined) : 8 & 9.5.03 AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) AutoCAD 2002 - niveau 2 : 3 & 4.6.03 (2 jours) LabView DSC (language to be defined) : 19 & 20.6.03 Siemens SIMATIC Training : Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 16 - 20.6.03 (5 days) Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 (sessions of 2 days) These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6.03 - 4, 5 & 7.11.03 (session de 3 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description ...

  14. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Habilitation électrique : recyclage HT/BT : 11 - 15.3.2002  (2 * 2 heures) PVSS Basics :  8 - 12.4.02  (5 days) ELEC-2002 : Spring Term :  9, 11, 16, 18, 23, 25, 30.4.02 (7 * 2.5 hours) LabVIEW base 1 : 22 - 24.4.02 (3 jours) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) LabVIEW Basics 2 : 13 & 14.5.02 (2 days) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) Cours sur la migration AutoCAD :   AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applica...

  15. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required): 11.4.03 (half-day, afternoon, ) LabView Basics 2 : 10 - 11.4.03 (3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03(6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6...

  16. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) Programmation de pilotes périphériques : 5 - 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) LabView DAQ (language to be defined) : 8 & 9.5.03 AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.0 (6 jours) FrontPage 2000 - niveau 1 : 20 & 21.5.03 (2 jours) AutoCAD 2002 - niveau 2 : 3 & 4.6.03 (2 jours) EXCEL 2000 - niveau 1 : 10 & 11.6.03 (2 jours) EXCEL 2000 - level 1 : 12 & 13.6.03 (2 days) PowerPoint 2000 (F) : 17 & 18.6.03 (2 jours) FrontPage 2000 - niveau 2 : 19 & 20.6.03 (2 jours) LabView DSC (langue à décider/language to be defined) : 19 & 20.6.03 EXCEL 2000 - niveau 2 : 24 & 25.6.03 (2 jours) Siemens SIMATIC Training : Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 16 - 20.6.03 (5 days) Simatic Net Network : 26 & 27.6.03 ...

  17. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : CLEAN-2002 : Working in a cleanroom (free course, registration required): 11.4.03 (half-day, afternoon) LabView Basics 2 : 10 - 11.4.03 (3 days) DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures) AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) Oracle iDS Reports : Build Internet Reports : 5 - 9.5.03 (5 days) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03(6 jours) Formation Siemens SIMATIC /Siemens SIMATIC Training : Introduction à STEP7 /Introduction to STEP7 : 3 & 4.6.03 (2 jours/2 days) Programmation STEP7/STEP7 Programming : 16 - 20.6.03 (5 jours/5 days) Réseau Simatic Net /Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité : Etre TSO au CERN : Prochaines sessions : 24, 25 & 27.6.03 - 4, 5 & 7....

  18. Places available**

    CERN Multimedia

    2003-01-01

    Places are available in the following courses : Introduction to PVSS : 10.3.03 (half-day, afternoon) CLEAN-2002 : Working in a cleanroom : 2.4.03 (half-day, afternoon, free course, registration required) LabView Basics 1 : 9 - 11.4.03 (3 days) Language to be decided. DISP-2003 - Spring II Term : Advanced Digital Signal Processing : 30.4, 7, 14, 21.5.03 (4 X 2-hour lectures). AutoCAD 2002 - niveau 1 : 29, 30.4 et 7, 8.5.03 (4 jours) AutoCAD 2002 - niveau 2 : 5 & 6.5.03 (2 jours) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 20, 21, 27 & 28.5.03 (6 jours) Siemens SIMATIC Training: Introduction to STEP7 : 3 & 4.6.03 (2 days) STEP7 Programming : 31.3 - 4.4.03 / 16 - 20.6.03 (5 days) Simatic Net Network : 15 & 16.4.03 / 26 & 27.6.03 These courses will be given in French or English following the requests. Cours de sécurité: Etre TSO au CERN : 3 sessions sont programmées pour 2003 : 25, 26 & 28.3.03 - 24, 25 & 27.6.03 - 4, 5 & 7.11.03 (sessions de 3 jours) ** The number o...

  19. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   Hands-on Object-Oriented Design and Programming with C++:  19 - 21.11.02  (3 days)  December 2002   LabVIEW - DSC (English) :  2 - 3.12.02  (2 days) AutoCAD 2002 - niveau 2 :  2 & 3.12.02  (2 jours) FileMaker (Français) :  2 - 5.12.02  (4 jours) PCAD Schémas - Débutants :  5 & 6.12.02  (2 jours) PCAD PCB - Débutants :  9 - 11.12.02  (3 jours) FrontPage 2000 - level 1:  9 & 10.12.02  (2 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisiona...

  20. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   Java Programming Language level 1 :  28 & 29.11.02  (2 days) December 2002   LabVIEW - DSC (English) :  2 - 3.12.02  (2 days) FileMaker (Français) :  2 - 5.12.02  (4 jours) PCAD Schémas - Débutants :  5 & 6.12.02  (2 jours) PCAD PCB - Débutants :  9 - 11.12.02  (3 jours) FrontPage 2000 - level 1:  9 & 10.12.02  (2 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at : Technical Training or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training M...

  1. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   Introduction to PVSS (free of charge): 11.11.02  (afternoon) EXCEL 2000 - niveau 1 :  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free of charge):  13.11.2002  (afternoon) AutoCAD 2002 - niveau 1 :  14, 15, 21, 22.11.02  (4 jours) Hands-on Object-Oriented Design and Programming with C++:  19 - 21.11.02  (3 days)  EXCEL 2000 - niveau 2 :  25 & 26.11.02  (2 jours) FrontPage 2000 - niveau 1 :  27 & 28.11.02  (2 jours) December 2002   LabVIEW - DSC (English) :  2 - 3.12.02  (2 days) AutoCAD 2002 - niveau 2 :  2 & 3.12.02  (2 jours) FileMaker (Français) :  2 - 5.12.02  (4 jours) PCAD Schémas - Débutants :  5 & 6.12.02 ...

  2. PLACES AVAILABLE

    CERN Multimedia

    Technical training; Tel. 74924

    2001-01-01

    Places are available in the following courses: PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) Programmation TSX Premium 1 : 15 - 19.10.01 (5 jours) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) Programming TSX Premium 2: 19 - 23.11.01 (5 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Autocad Migration support courses: a detailed calendar will be published shortly for this series of sessions which will start on 15.10.2001. Registration is already open AutoCAD : Mise à jour AutoCAD r-14 vers 2002 (2 jours) AutoCAD Mechanical PowerPack 6 basé sur AutoCAD 2002 (5 jours) The following LabView courses will be given in either English or French according to demand LabVIEW - Base 1 / LabVIEW - Basics 1 : 10 - 12.9.01 (3 jours / 3 days)...

  3. PLACES AVAILABLES

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: PVSS Basics : 20 - 24.8.01 (5 days) PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) Programming TSX Premium 1: 15 - 19.10.01 (5 days) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) Programming TSX Premium 2: 19 - 23.11.01 (5 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) The following LabView courses will be given in either English or French according to demand LabVIEW - Base 1 / LabVIEW - Basics 1 : 10 - 12.9.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 13 - 14.9.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 15 - 17.10.01 (3 jours / 3 days) LabVIEW - Base 2 / LabVIEW - Basics 2 : 18 - 19.10.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 12 - 14.11.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 15 - 16.11.01 (2 jours / 2...

  4. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: November 2002   LabView hands-on (bilingue/bilingual): 5.11.02 (matin/morning) LabView DAQ hands-on (bilingue/bilingual):  5.11.02  (après-midi afternoon) PCAD Schémas - Débutants :  5 & 6.11.02  (2 jours) PCAD PCB - Débutants :  9 - 11.11.02  (3 jours) Introduction au PC et Windows 2000 au CERN :  6 & 7.11.02  (2 jours) Oracle 8i : Access the Database with Java :  7 & 8.11.02  (2 days) Introduction to PVSS (free of charge):  11.11.2002 pm  (1/2 day) Basic PVSS:  12 - 14.11.02  (3 days) EXCEL 2000 - niveau 1 :  12 & 13.11.02  (2 jours) CLEAN-2002: Working in a Cleanroom (English, free of charge):  13.11.2002  (afternoon) LabView Base 1 :  13 - 15.11.02  (3 jours) AutoCAD 2002 - niveau 1 :  14, 15, 21, 22.11.02  (4 jours) LabVIEW - Advanced:  18 - 20.11.02  (3 days) Hands-on Object-Oriented Design and Programming with C++ :  19 - 21.11.02  (3 days)  LabVIEW - Basics 2:  21 - 22.11.02 ...

  5. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: PVSS Basics : 20 - 24.8.01 (5 days) PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) Programming TSX Premium 1: 15 - 19.10.01 (5 days) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) Programming TSX Premium 2: 19 - 23.11.01 (5 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) The following LabView courses will be given in either English or French according to demand LabVIEW - Base 1 / LabVIEW - Basics 1 : 10 - 12.9.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 13 - 14.9.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 15 - 17.10.01 (3 jours / 3 days) LabVIEW - Base 2 / LabVIEW - Basics 2 : 18 - 19.10.01 (2 jours / 2 days) LabVIEW - Base 1 / LabVIEW - Basics 1 : 12 - 14.11.01 (3 jours / 3 days) LabVIEW - DAQ / LabVIEW - DAQ : 15 - 16.11.01 (2 jours / 2...

  6. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction à Windows 2000 au CERN : 2 sessions de _ journée les 24 et 25.9.01 PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) PowerPoint 2000 : 1 et 2.10.01 (2 jours) EXCEL 2000 - niveau 1 : 3 et 4.10.01 (2 jours) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) PCAD Schémas - débutants : 4 - 5.10.01 (2 jours) Introduction à Outlook : 5.10.01 (1 journée) Frontpage 2000 - niveau 1 : 8 et 9.10.01 (2 jours) PCAD PCB - débutants : 8 - 10.10.01 (3 jours) C++ for Particle Physicists : 8 - 12.10.01 (6 3-hour lectures) MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Basics 1 :  15 - 17.10.01  (3 days) Programmation TSX Premium 1 : 15 - 19.10.01 (5 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Programmation TSX Premium 1 : 22 - 26.10.01...

  7. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Cadence Board Design tools : Upgrading to release 14 :  3 1-day sessions on 9, 10 & 11.10.01 MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Base 2 : 18 & 19.10.01 (2 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Contract Follow-up (F) :  30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introduction to C Programming :  21- 23.11.01 (3 days) The Java programming language Level 2:  26 - 28.11.01 (...

  8. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Introduction à Windows 2000 au CERN : 2 sessions de _ journée les 24 et 25.9.01 PROFIBUS : 25 - 26.9.01 (2 jours) PROFIBUS : 27 - 28.9.01 (2 days) EXCEL 2000 - niveau 1 : 3 et 4.10.01 (2 jours) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) Introduction à Outlook : 5.10.01 (1 journée) Frontpage 2000 - niveau 1 : 8 et 9.10.01 (2 jours) C++ for Particle Physicists : 8 - 12.10.01 (6 lectures) MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) Programmation TSX Premium 1 : 15 - 19.10.01 (5 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Programmation TSX Premium 1 : 22 - 26.10.01 (5 jours) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2...

  9. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: EXCEL 2000 - niveau 1 : 3 et 4.10.01 (2 jours) Automates et réseaux de terrain : 3 - 4.10.2001 (2 jours) Introduction à Outlook : 5.10.01 (1 journée) C++ for Particle Physicists : 8 - 12.10.01 (6 lectures) Cadence Board Design tools : Upgrading to release 14 : 3 1-day sessions on 9, 10 & 11.10.01 MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Base 2 : 18 & 19.10.01 (2 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introd...

  10. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: MS-Project 2000 - niveau 1 : 15 - 18.10.01 (4 demi-journées) LabView Base 2 : 18 & 19.10.01 (2 jours) WORD 2000 : importer et manipuler des images : 19.10.01 (1 journée) Contract Follow-up (F) : 30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) Automates et réseaux de terrain : 13 & 14.11.01 (2 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introduction to C Programming :  21- 23.11.01 (3 days) The Java programming language Level 2:  26 - 28.11.01 (3 days) Programmation TSX Premium 2 : 26 ...

  11. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabView Base 1 :  23 - 25.9.02  (3 jours) Object-Oriented Analysis & Design using UML:  25 - 27.9.02  (3 days) LabView DAQ (E):  26 - 27.9.02  (2 days) Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) AutoCAD 2002 - niveau 2 :  14 - 15.10.02  (2 jours) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD 2002 - Level 1:  17, 18, 24, 25.10.02  (4 days) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11.02  (6 jours) Introduction à ANSYS/Introduction to ANSYS (langue à définir suivant demande/ Language to be chosen according to demand):...

  12. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Java 2 Enterprise Edition - Part 2: Enterprise JavaBeans:  18 - 20.9.02  (3 days) AutoCAD 2002 - niveau 1 :  19, 20, 26, 27.9.02  (4 jours) LabView Base 1 :  23 - 25.9.02  (3 jours) Object-Oriented Analysis & Design using UML:  25 - 27.9.02  (3 days) LabView DAQ (E):  26 - 27.9.02  (2 days) Introduction to Oracle 8i : SQL and PL/SQL:  7 - 11.10.02  (5 days) CLEAN-2002 : Working in a Cleanroom (free of charge):  10.10.02  (half-day, p.m.) AutoCAD 2002 - niveau 2 :  14 - 15.10.02  (2 jours) Introduction à DesignSpace :  16.10.02  (1 journée) Introduction to DesignSpace:  17.10.02  (1 day) AutoCAD 2002 - Level 1:  17, 18, 24, 25.10.02  (4 days) AutoCAD Mechanical 6 PowerPack (F) :  21, 22, 23.10 et 4, 5, 6.11....

  13. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Contract Follow-up (F) : 30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) Nouveautés d'EXCEL : 5.11.01 (1/2 journée) Introduction a Windows 2000 au CERN : 6.11.01 (1/2 journée) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) Automates et réseaux de terrain : 13 & 14.11.01 (2 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to XML :  19 - 20.11.01 (2 days) Programming TSX Premium 1 :  19 - 23.11.01  (5 days) Introduction to C Programming :  21- 23.11.01 (3 days) The Java programming language Level 2:  26 - 28.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Autocad Migration support courses: a detail...

  14. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Contract Follow-up (F) : 30.10.01 (1/2 journée) The CERN Engineering Data Management System for Electronics Design :  30.10.01 (1 day) Nouveautés d'Excel 2000 : 5.11.01 (1/2 journée) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) Introduction à Windows 2000 au CERN : 6.11.01 (1/2 journée) The Java programming language Level 1: 8 - 9.11.01 (2 days) LabView Base 1 : 12 - 14.11.01 (3 jours) LabVIEW DAQ (F) : 15 & 16.11.01 (2 jours) Automates et réseaux de terrain : 13 & 14.11.01 (2 jours) Introduction to PERL 5 :  15 - 16.11.01  (2 days) LabVIEW - DAQ : 15 - 16.11.01 (2 jours) Introduction to XML :  19 - 20.11.01 (2 days) Introduction to C Programming :  21- 23.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Object-Oriented Analysis and Design :  27 - 30.11.2001 (4 days) Hands...

  15. PLACES AVAILABLE

    CERN Multimedia

    Technical Training; Tel. 74924

    2001-01-01

    Places are available in the following courses: Nouveautés d'EXCEL : 5.11.01 (1/2 journée) Introduction a Windows 2000 au CERN : 6.11.01 (1/2 journée) UNIX pour non-programmeurs : 5 - 7.11.01 (3 jours) Design Patterns :  7 - 8.11.01 (2 days) The Java programming language Level 1: 8 - 9.11.01 (2 days) Automates et réseaux de terrain : 13 & 14.11.01 (3 jours) Introduction à Windows 2000 au CERN : 12 - 14.11.01 (1/2 journée) Introduction to Windows 2000 at CERN :  14.11.01  (half-day) Introduction to PERL 5 :  15 - 16.11.01  (2 days) Introduction to C Programming :  21- 23.11.01 (3 days) Programmation TSX Premium 2 : 26 - 30.11.01 (5 jours) Contract Follow-up (F) : 26.11.01 (1/2 journée) Object-Oriented Analysis and Design :  27 - 30.11.2001  (4 days) Hands-on Object-Oriented Design and Programming with C++ :  11 - 13.12.2...

  16. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: ELEC-2002 : Spring Term :  9, 11, 16, 18, 23, 25, 30.4.02 (7 * 2.5 hours) Object-Oriented Analysis & Design: 16 - 19.4.02  (4 days) The CERN Engineering Data Management System for Advanced users:  16.4.02  (1 day) Migration from AutoCAD 14 towards AutoCAD Mechanical6 PowerPack:  17 - 19.4 and 2 &3.5.02  (5 days) AutoCAD - niveau 1 : 22, 23, 29, 30.4 et 6, 7.5.02 (6 jours) LabVIEW base 1 : 22 - 24.4.02 (3 jours) CLEAN 2002 : working in a cleanroom:  24.4.02  (half-day, pm) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) AutoCAD : Mise à jour AutoCAD r-14 vers 2002 : 25 & 26.4.02 (2 jours) Cotations selon les normes GPS de l'ISO : 29 - 30.4.02 (2 jours) Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2 : 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-...

  17. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2: 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-14, 17, 21, 27-28.5.02 (6 jours) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec MicroFIP HANDLER : 14.5 - après-midi, 15.5.02 - matin (1 jour) WorldFIP - FullFIP FDM : FIP Device Manager (F) : 15.5 - après-midi, 16.5.02 - matin (1 jour) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) EXCEL 2000 - niveau 2 : 22 & 23.5.02 (2 jours) The CERN Engineering Data Management System for Advanced users:  30.5.02  (1 day) LabVIEW Basics 1:  3 - 5.6.02  (3 days) AutoCAD 2002 - condensé : 4 - 6.6.02 (3 jours) LabVIEW DAQ (E):  6 & 7.6.02  (2 days) AutoCAD 2002 - Level 1:  10 - ...

  18. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: The CERN Engineering Data Management System for Advanced users : 16.4.02  (1 day) Migration from AutoCAD 14 towards AutoCAD Mechanical6 PowerPack:  17 - 19.4 and 2 &3.5.02  (5 days) AutoCAD - niveau 1 : 22, 23, 29, 30.4 et 6, 7.5.02 (6 jours) LabVIEW base 1 : 22 - 24.4.02 (3 jours) CLEAN 2002 : working in a cleanroom:  24.4.02  (half-day, pm) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) AutoCAD : Mise à jour AutoCAD r-14 vers 2002 : 25 & 26.4.02 (2 jours) Cotations selon les normes GPS de l'ISO : 29 - 30.4.02 (2 jours) Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2: 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-14, 17, 21, 27-28.5.02 (6 jours) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec Micr...

  19. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabVIEW Basics 2: 13 & 14.5.02 (2 days) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec MicroFIP HANDLER : 14.5 - après-midi, 15.5.02 - matin (1 jour) WorldFIP - FullFIP FDM : FIP Device Manager (F) : 15.5 - après-midi, 16.5.02 - matin (1 jour) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) EXCEL 2000 - niveau 2 : 22 & 23.5.02 (2 jours) The CERN Engineering Data Management System for Advanced users:  30.5.02  (1 day) LabVIEW Basics 1:  3 - 5.6.02  (3 days) AutoCAD 2002 - condensé : 4 - 6.6.02 (3 jours) LabVIEW DAQ (E):  6 & 7.6.02  (2 days) AutoCAD 2002 - Level 1:  10 - 12 and 24 - 26.6.02  (6 days) If you wish to participate in one of these courses, please discuss with your supervisor and apply electronically directly from the c...

  20. PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2002-01-01

    Places are available in the following courses: LabVIEW base 1 : 22 - 24.4.02 (3 jours) CLEAN 2002 : working in a cleanroom:  24.4.02  (half-day, pm) LabVIEW DSC (F) 25 & 26.4.02 (2 jours) AutoCAD : Mise à jour AutoCAD r-14 vers 2002 : 25 & 26.4.02 (2 jours) Cotations selon les normes GPS de l'ISO : 29 - 30.4.02 (2 jours) Introduction to the CERN Engineering Data Management System:  7.5.02  (1 day) LabVIEW Basics 2: 13 & 14.5.02 (2 days) AutoCAD Mechanical 6 PowerPack (F) : 13-14, 17, 21, 27-28.5.02 (6 jours) WorldFIP - Généralités : 14.5.2002 (1/2 journée) WorldFIP - Développer avec MicroFIP HANDLER : 14.5 - après-midi, 15.5.02 - matin (1 jour) WorldFIP - FullFIP FDM : FIP Device Manager (F) : 15.5 - après-midi, 16.5.02 - matin (1 jour) LabVIEW DAQ (F) : 15 & 16.5.02 (2 jours) EXCEL 2000 - niveau 2 : 22 & 23.5.02 (2 jours)...

  1. TRANSFERT THERMIQUE INSTATIONNAIRE DANS UN MUR TRICOUCHES SUBISSANT UN CHANGEMENT DE PHASE PAR SOLIDIFICATION.

    Directory of Open Access Journals (Sweden)

    O Arfi

    2016-05-01

    Full Text Available Une étude numérique du transfert de chaleur instationnaire dans un mur tricouches est présentée. Le modèle physique est basé sur l’équation de conduction thermique unidirectionnelle en tenant compte des équations de couplages au niveau des interfaces et des conditions convectives de surfaces. Les équations de transfert sont données en représentation enthalpique pour le matériau à changement de phase (MCP, et en formulation générale pour les régions solides. La formulation adimensionnelle a permis de dégager les principaux paramètres affectant le transfert : nombre de Biot (Bi, nombre de Stephan (Ste et le degré de surchauffe (qm. La discrétisation des équations est réalisée en utilisant la méthode des volumes finis selon un schéma explicite. La solution numérique est obtenue par une méthode itérative basée sur la notion d’enthalpie critique. L’étude de l’influence de la condition convective chaude, gouvernée par  Bi¥,cet θ¥,c , a montré que la présence des couches solides affecte la cinétique de la solidification, les limites de la solidification et le transfert de chaleur par un effet de stockage et de déstockage d’énergie sensible. L’influence de la température θ¥,c sur le processus de changement de phase est fortement dépendante du nombre de Biot Bi¥,c.

  2. La filière d’oignon d’été dans le Saïs au Maroc : la place et le rôle des intermédiaires de la commercialisation

    Directory of Open Access Journals (Sweden)

    Caroline Lejars

    2014-11-01

    Full Text Available Les agriculteurs dépendent souvent, pour la commercialisation de leur produit, d'un réseau complexe d'intermédiaires privés. Dans les pays en développement, ces intermédiaires de la vente sont souvent accusés de réaliser des profits excessifs et d’être responsables des énormes écarts entre le prix de vente au champ et le prix payé par le consommateur. En s’appuyant sur l’étude de la filière oignon d’été dans le Saïs au Maroc, cet article analyse le rôle de ces réseaux d'intermédiaires, et la répartition des coûts et de la marge bénéficiaire le long de la chaine de production et de commercialisation. On montre ainsi que cette filière crée un grand nombre d'emplois en aval de la production, que ce soit pour la collecte, le stockage, le transport ou la vente. La part de la marge bénéficiaire revenant à l’ensemble des intermédiaires est supérieure à celle revenant aux producteurs, ce qui entraine effectivement une importante différence de prix entre le prix de vente et le prix du marché. Même si les profits et les rôles des intermédiaires sont très variables, certains des acteurs intermédiaires, notamment les détaillants et les revendeurs en gros, récupèrent des marges bien supérieures à celles des agriculteurs. L’organisation des producteurs autour de zones de stockage et d’activités de commercialisation permettrait de limiter le nombre d’intermédiaires, d’accroitre le profit des agriculteurs et de modifier les rapports de négociations souvent asymétriques entre agriculteurs et commerçants.

  3. Quelle place au travail des agriculteurs dans la fabrication d’une agriculture durable ? How does the work of the farmers fits in the making of a sustainable agriculture? Que lugar tiene el trabajo de los agricultores en la construcción de una agricultura sostenible ?

    Directory of Open Access Journals (Sweden)

    Pascal Béguin

    2011-05-01

    Full Text Available Après avoir rappelé le contexte de mutation que connaît actuellement le secteur agricole, nous nous interrogeons sur la place du travail dans la fabrication d’une agriculture durable. Dans cette perspective, nous soulignons trois types d’enjeux. Le premier est relatif à l’objectivation des liens travail-santé. En effet, les conditions de travail se dégradent dans le secteur et celui-ci génère de l’exclusion. Et il est loin d’être attractif. Le second renvoie au lien entre conception et travail. L’agriculture actuelle n’est pas soutenable. Et les pratiques productives des agriculteurs sont en pleine mutation. Mais encore faut-il que ces techniques soient actionnables dans le travail. Nous désignons donc trois voies à la prise en compte du travail dans la conception. Le troisième enjeu est relatif au vivre ensemble. Le développement durable pose en effet très profondément la question d’un futur à faire advenir collectivement. Nous considérons alors cette dimension politique comme un « projet », en posant la question de la prise en compte des projets des agriculteurs dans la définition des visées du développement durable.This paper is focused on work in the making of a sustainable agriculture. We emphasize three types of issue. The first one is related to the objectification of occupational health. Agriculture is a tough sector, which produces exclusion and which is far from attractive. The second is related to design. Farming today is not sustainable, and technical systems need to be designed. But the changes need to be actionable at work. So we present three ways needed in order to think out the workers’ activity during the design process. The third issue is related to Policy: sustainable development is also a future to bring together. We suggest that this collective dimension could be grasped as a « project », which takes into consideration the projects of farmers in order to define the aims of

  4. Flow boiling of refrigerant-oil mixtures; Transferts de chaleur dans un melange constitue de fluide frigorigene et d'huile

    Energy Technology Data Exchange (ETDEWEB)

    Feidt, M

    1999-10-13

    The phase out of chlorine containing refrigerants (CFC and HCFC) has led to the introduction of new refrigerants and lubricants to the market. The interest in using HFC fluids as working fluids to replace fluids harmful to the stratospheric ozone layer. The study presents the influence of synthetic oil (POE ISO 68) on flow boiling of refrigerants R134a (pure fluid) and R410A (R32/R125 50%/50%). Local and average heat transfer coefficients and pressure drops have been measured for a smooth horizontal tube. The distribution of the heat transfer coefficient at the inner wall has been obtained from solving the inverse heat conduction problem (IHCP) and resulted in a local combination of nucleate and convective contributions to flow boiling. Local heat transfer coefficients have been averaged and displayed as a function of the vapour quality. For R134a: small amounts of oil (1% to 6%) in the liquid phase increased the heat transfer coefficient at low and intermediate vapour qualities (less than 0.60) compared to pure fluid. However a hugh reduction of the heat transfer has been observed at higher vapour qualities. For R410A : oil dramatically decreases the heat transfer coefficient compared to pure fluid. Pressure drops are also affected by small amounts of lubricant: an important increase has been noted for both fluids. Available design methods for flow boiling heat transfer coefficient (superposition, enhancement, asymptotic) badly predict the experimental results. Nevertheless a new design method accounting for flow patterns has shown good agreements. The influence of the lubricant on the heat transfer is discussed and a new proposition is made to calculate pressure drops. (author)

  5. Heat pumps. Tax credit: repercussions in the profession; Pompes a chaleur. Credit d'impot: des retentissements dans la profession

    Energy Technology Data Exchange (ETDEWEB)

    Lux, C.

    2005-04-01

    The French by-law from February 9, 2005, which completes the 2005 finances law, precises the equipments concerned by a 40% tax credit. It takes into account only the geothermal and air/water heat pumps for space heating with a coefficient of performance (COP) {>=} 3. The air/air heat pumps are excluded from this purview while they were included in 2004. This article presents the contrasted reactions of some professionals in front of this measure. The tax credit concerns only the heat pumps for space heating purposes, while the air/air heat pumps can produce indifferently heat and coldness and sometimes with different COPs in space heating and in space cooling. (J.S.)

  6. Study of the electron heat transport in Tore-Supra tokamak; Etude du transport de la chaleur electronique dans le Tokamak Tore Supra

    Energy Technology Data Exchange (ETDEWEB)

    Harauchamps, E

    2004-07-01

    This work presents analytical solutions to the electron heat transport equation involving a damping term and a convection term in a cylindrical geometry. These solutions, processed by Matlab, allow the determination of the evolution of the radial profile of electron temperature in tokamaks during heating. The modulated injection of waves around the electron cyclotron frequency is an efficient tool to study heat transport experimentally in tokamaks. The comparison of these analytical solutions with experimental results from Tore-Supra during 2 discharges (30550 and 31165) shows the presence of a sudden change for the diffusion and damping coefficients. The hypothesis of the presence of a pinch spread all along the plasma might explain the shape of the experimental temperature profiles. These analytical solutions could be used to determine the time evolution of plasma density as well or of any parameter whose evolution is governed by a diffusion-convection equation. (A.C.)

  7. Flow boiling of refrigerant-oil mixtures; Transferts de chaleur dans un melange constitue de fluide frigorigene et d'huile

    Energy Technology Data Exchange (ETDEWEB)

    Feidt, M.

    1999-10-13

    The phase out of chlorine containing refrigerants (CFC and HCFC) has led to the introduction of new refrigerants and lubricants to the market. The interest in using HFC fluids as working fluids to replace fluids harmful to the stratospheric ozone layer. The study presents the influence of synthetic oil (POE ISO 68) on flow boiling of refrigerants R134a (pure fluid) and R410A (R32/R125 50%/50%). Local and average heat transfer coefficients and pressure drops have been measured for a smooth horizontal tube. The distribution of the heat transfer coefficient at the inner wall has been obtained from solving the inverse heat conduction problem (IHCP) and resulted in a local combination of nucleate and convective contributions to flow boiling. Local heat transfer coefficients have been averaged and displayed as a function of the vapour quality. For R134a: small amounts of oil (1% to 6%) in the liquid phase increased the heat transfer coefficient at low and intermediate vapour qualities (less than 0.60) compared to pure fluid. However a hugh reduction of the heat transfer has been observed at higher vapour qualities. For R410A : oil dramatically decreases the heat transfer coefficient compared to pure fluid. Pressure drops are also affected by small amounts of lubricant: an important increase has been noted for both fluids. Available design methods for flow boiling heat transfer coefficient (superposition, enhancement, asymptotic) badly predict the experimental results. Nevertheless a new design method accounting for flow patterns has shown good agreements. The influence of the lubricant on the heat transfer is discussed and a new proposition is made to calculate pressure drops. (author)

  8. Physique de spin dans l'effet Hall quantique par des expériences de chaleur spécifique et de magnétotransport

    Science.gov (United States)

    Melinte, Sorin; Shayegan, Mansour; Bayot, Vincent

    We review recent heat capacity and magnetotransport experiments on GaAs/AlGaAs heterostructures containing multilayer two-dimensional electron systems (2DESs) in the quantum Hall regime. Emphasis in this article is on the study of the heat capacity near Landau level filling factor ν=1. We also present a detailed survey of the development of the quantum Hall effect in tilted-magnetic fields for ν≲2. Among the novel phenomena we address is the strong coupling between the nuclear spins and the electrons associated with the spin phase transitions of the 2DES at ν=4/3 and near ν=1. To cite this article: S. Melinte et al., C. R. Physique 3 (2002) 667-676.

  9. Focus - Mise en place d’un réseau expérimental sur la réhabilitation des zones humides dans le Finistère

    Directory of Open Access Journals (Sweden)

    DAUSSE, Armel

    2017-09-01

    Full Text Available Pour juger de l’efficacité des actions menées et des gains apportés par les travaux de réhabilitation des zones humides, la mise en place d’un suivi le plus pertinent possible est nécessaire. Focus sur l'action du réseau expérimental de réhabilitation des zones humides du Finistère mis en place pour développer un suivi scientifique pluridisciplinaire ambitieux sur des sites pilotes faisant l’objet de travaux de réhabilitation.

  10. Theoretical and experimental study of heat transfers and pressure drops along surfaces fitted with herring-bone fins: correlation between geometric and aero thermal parameters; Etudes theorique et experimentale du transfert de chaleur et des pertes de charge de surfaces munies d'ailettes disposees en chevron - correlation entre parametres geometriques et aerothermiques

    Energy Technology Data Exchange (ETDEWEB)

    Pelce, J; Malherbe, J; Pierre, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Principal results are given of experimental research which has been carried out on the flow of a fluid along a surface fitted with herringbone fins. Aero-thermal tests have been effected on a large number of these surfaces whose geometrical parameters have been made to vary systematically. In particular, work on a large scale model has made it possible to analyse the mechanisms of heat transfer and of pressure drops. On this basis a theoretical study has led to the establishment of a correlation between the geometric configuration and the aero-thermal performances of these surfaces. Experimental results are in good agreement with the theoretical relationships. An expression has thus been derived applicable to this type of herring-boned surface in a wide zone. (authors) [French] L'ecoulement d'un fluide au voisinage d'une surface munie d'ailettes disposees en chevron a fait l'objet de recherches experimentales dont on a rappele les principaux resultats. Des essais aerothermiques ont ete effectues sur un grand nombre de ces surfaces dont a fait varier les parametres geometriques de facon systematique. En particulier, des etudes sur une maquette a grande echelle ont permis d'analyser les mecanismes de transfert de chaleur et de perte de charge. Sur ces bases, une etude theorique a conduit a des correlations entre la geometrie et les performances aerothermiques de ces surfaces. Les resultats experimentaux sont en bon accord avec les relations theoriques. On possede ainsi une formulation pour ce type de surface ailettee valable dans un domaine etendu. (auteurs)

  11. STRATEGIC PLACE TRIANGLE PENGEMBANGAN POTENSI KAWASAN PARIWISATA BOJONEGERO

    Directory of Open Access Journals (Sweden)

    Muchammad Nurif

    2015-06-01

    Full Text Available Kabupaten Bojonegoro ditetapkan sebagai salah satu Daerah Tujuan Wisata (DTW di Jawa Timur karena memiliki potensi obyek wisata alam dan budaya yang telah mendapatkan perhatian wisatawan nusantara pada umumnya. Dalam kebijakan pengembangan yang tertuang dalam Rencana Induk Pengembangan Pariwisata (RIPP Jawa Timur 1999-2015 Kabupaten Bojonegoro meskipun bukan sebagai gerbang utama namun memiliki peran strategis untuk mendorong pertumbuhan kawasan di sekitarnya. Dalam penelitian, peneliti melakukan pemetakan perubahan lingkungan eksternal, pemetakan pesaing dan pelanggan, analisis internal, dan analisis TOWS. Selanjutnya akan dirumuskan Strategic Place Triangle. Yang dimaksud dengan Strategic Place Triangle adalah suatu pendekatan strategi pemasaran wilayah yang mencakup tiga hal kunci, yaitu (1 Strategi yang mencakup Segmentasi-Targeting-Positioning, (2 Taktik yang mencakup Diferensiasi-Marketing Mix-Selling, (3 Value yang mencakup Brand-Servis-Proses. Analisis pemetaan terhadap lingkungan eksternal dan internal dengan menggunakan pendekatan Strategi Pemasaran Wilayah (Marketing Places tersebut akan menghasilkan Positioning, Diferensiasi, dan Brand, bagi potensi kawasan pariwisata Bojonegoro. Positioning- nya adalah ibarat Bali bagi Jawa Timur dengan kekhasan tetap memegang nilai-nilai religi dan kultur lokal setempat. Diferensiasi-nya adalah one-stop-shopping services, pesona wisata yang tak berakhir, cantik alami, penduduknya yang santun, ramah dan mempesona. Brand-nya adalah Pesona Wisata Bojonegoro.

  12. Fluid Flow in Low Permeable, Porous Media Écoulements fluides dans un milieu poreux peu perméable

    Directory of Open Access Journals (Sweden)

    Dutta N. C.

    2006-11-01

    kinetic theory of chemical reaction in which the time-temperature history is provided by the solution of an appropriate heat conduction equation. This model of geopressure has a practical application since it deals with the generation and maintenance of abnormally high fluid pressures over geologic time and impacts the hydrocarbon migration in clastic basins. La migration des hydrocarbures traite du déplacement du pétrole consécutif à l'expulsion des roches mères vers les réservoirs saturés en eau ou à travers des zones perméables créées par des fractures ou des failles. Bien que les principes sous-jacents contrôlant les mouvements de fluides dans les milieux poreux (réservoirs soient bien compris des ingénieurs de réservoir, on connaît moins de choses sur les caractéristiques des écoulements dans les milieux poreux peu perméables, comme les argiles et les schistes. En termes d'écoulement, les paramètres principaux sont la porosité, la perméabilité, et les gradients potentiels des fluides. Pour les argiles et les schistes, ces paramètres sont peu connus; et cependant ce sont eux qui contrôlent les périodes pendant lesquelles les écoulements fluides se sont produits dans les bassins sédimentaires (de 100 à 100 millions d'années. Dans cet article, on examine la dépendance paramétrique des constantes temporelles des écoulements fluides dans les sédiments peu perméables par rapport à leur porosité et leur perméabilité. Dans une première partie, on présente une technique d'étude de l'effet d'un écoulement dans les argiles qui produit la sous-compaction et l'augmentation de la pression de fluide par rapport à la pression hydrostatique normale. On se place dans des conditions d'avant-forage ; la technique utilise la méthode des analyses de vitesse par mise en collection de point milieu commun des données sismiques de surface, et est basée sur le concept développé par Hottmann et Johnson (1965 et Pennebaker (1968. Dans une seconde

  13. ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Places disponibles*/Places available **

    CERN Multimedia

    2003-01-01

    * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may vary. Please check our Web site to find out the current availability. Des places sont disponibles dans les cours suivants : Places are available in the following courses : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 8 - 10.10.2003 (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 : 20 & 22.10.03 (2 jours) CLEAN-2002 : Working in a Cleanroom : 23.10.03 (half day, free of charge) Plannification de projet avec MS-Project/Project Scheduling with MS-Project : 2 sessions : 23.10 & 4.11.03 and 18 &25.11.03 (2 jours/2 days - langue à définir/language to be defined) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) Introduction to Pspice : 4.11...

  14. Places disponibles*/Places available ** - French version only

    CERN Multimedia

    2003-01-01

    Des places sont disponibles dans les cours suivants : Places are available in the following course : Java 2 Enterprise Edition - Part 2 : Enterprise JavaBeans : 20 - 22.1.03 (3 days) Introduction to PVSS : 27.1.03 (Afternoon) free course but registration necessary Basic PVSS : 28 - 30.1.03 (3 days) MAGNE-03 - Magnétisme pour l'électrotechnique : 28 - 30.1.03 (3 jours) Introduction to the CERN Engineering Data Management System : 28.1.03 (1 day) MAGNE-03 - Magnetism for Technical Electronics : 11 - 13.2.03 (3 days) AutoCAD 2002 - niveau 1 : 24, 25.2 et 3, 4.3.03 (4 jours) AutoCAD 2002 - niveau 2 : 27 & 28.2.03 (2 jours) C++ for Particle Physicists : 10 - 14.3.03 (6 X 3 hour lectures) AutoCAD Mechanical 6 PowerPack (F) : 12, 13, 17, 18, 24 & 25.3.03 (6 jours) * Etant donné le délai d'impression du Bulletin, ces places peuvent ne plus être disponibles au moment de sa parution. Veuillez consulter notre site Web pour avoir la dernière mise à jour. ** The number of places available may va...

  15. Berpikir Rasional-Ilmiah dan Pendekatan Interdisipliner dan Multidisipliner dalam Studi Hukum Keluarga Islam

    Directory of Open Access Journals (Sweden)

    Khoiruddin Nasution

    2017-12-01

    Full Text Available This short article tries to explain how important it is to think rationally and scientifically, place the position of approachment in the Study of Islamic Family Law, also describe the use of Interdisciplinary and multidisciplinary approach to understand and practice the Islamic Family Law. In conclusion, there are three conclutions. First, students need to get used to think, write, speak and act rationallly and scientifically. The process can be carried out by integrating with the entire subjecy. Second,  needs a good and comprehensive understanding of approachment positions in the study of Islamic Family Law, both in relation to habituation of thinking, writing, speaking and acting rational and scientific as well as in effort to integrate and interconnect Islam and science. Third, it is necessary to habituate using an interdisciplinary and multidisciplinary approach to understand and observe all matters  that related to the Islamic Family Law.   [Tulisan singkat ini mencoba menjelaskan bagaimana pentingnya berpikir rasional dan ilmiah, meletakkan dimana posisi pendekatan dalam Studi Hukum Keluarga Islam, sekaligus menggambarkan penggunaan Pendekatan Interdisipliner dan Multidisipliner dalam memahami dan mengamalkan Hukum Keluarga Islam. Kesimpulannya ada tiga. Pertama, mahasiswa perlu dibiasakan berpikir, menulis, berbicara dan bentindak rasional dan ilmiah. Proses pembiasaannya dapat dilakukan secara terintegrasi dengan seluruh mata kuliah. Kedua, perlu pemahaman yang baik dan konprehensif bagaimana posisi pendekatan dalam studi Hukum Keluarga Islam, baik dalam kaitannya dengan pembiasaan berpikir, menulis, berbicara dan bentindak rasional dan ilmiah maupun dalam upaya integrasi dan/atau interkoneksi keilmuan. Ketiga, perlu pembiasaan menggunakan pendekatan interdisipliner dan multidisipliner dalam memahami dan mengamalkan segala persoalan yang berkaitan dengan Hukum Keluarga Islam.

  16. On the Optimal Thermal Management of Hybrid-Electric Vehicles with Heat Recovery Systems Sur le thermo-management optimal d’un véhicule électrique hybride avec un système de récupération de chaleur

    Directory of Open Access Journals (Sweden)

    Merz F.

    2012-09-01

    Full Text Available A general framework to combine optimal energy management (powertrain supervisory control and thermal management in Hybrid Electric Vehicles (HEV is presented. A HEV system with engine exhaust aftertreatment and exhaust heat recovery system is simulated under various scenarios, including warm and cold start. Optimal strategies are derived from Pontryagin Minimum Principle (PMP. The concept of fuel equivalent of thermal energy variations – similar to the equivalence factors for battery energy of standard Equivalent Consumption Minimization Strategy (ECMS – is introduced. The PMP-based strategies are compared with a heuristic, rule-based strategy. The benefits in fuel economy and reduction of pollutant emissions that are obtained for several scenarios are very promising. Une approche généralisée pour combiner la gestion de l’énergie (supervision du groupe motopropulseur et le thermo-management dans les véhicules hybrides électriques est proposée. Un système hybride incluant le post-traitement des polluants et un système de récupération de la chaleur à l’échappement du moteur thermique est simulé pour plusieurs scénarii, y compris le cas de départ à froid. Des stratégies de gestion de l’énergie optimales sont dérivées à partir du Principe de Minimum de Pontriaguine (PMP. Inspirée par les facteurs d’équivalence pour la consommation électrique que l’on retrouve dans la stratégie ECMS, la notion d’équivalent en carburant des flux d’énergie thermique est introduite. Les stratégies dérivées du PMP sont comparées avec une stratégie heuristique basée sur des règles. Les bénéfices en termes d’économies de carburant et réduction des émissions polluantes que l’on trouve pour différents scénarii sont encourageantes.

  17. Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, F [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces etudes, deux applications pratiques

  18. Study and installation of concrete shielding in the civil engineering of nuclear construction (1960); Etude et mise en place des betons de protection dans le genie civil des ouvrages nucleaires (1960)

    Energy Technology Data Exchange (ETDEWEB)

    Dubois, F. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    The object of this report is to give technical information about high density concretes which have become very important for radiation biological shielding. The most generally used heavy aggregates (barytes, ilmenite, ferrophosphorus, limonite, magnetite and iron punching) to make these concretes are investigated from the point of view prospecting and physical and chemical characteristics. At first, a general survey of shielding concretes is made involving the study of components, mixing and placing methods, then, a detailed investigation of some high density concretes: barytes concrete, with incorporation of iron punching or iron shot, ferrophosphorus concrete, ilmenite concrete and magnetite concrete, more particularly with regard to grading and mix proportions and testing process. To put this survey in concrete form, two practical designs are described such as they have been carried out at the Saclay Nuclear Station. Specifications are given for diverse concretes and for making the proton-synchrotron 'Saturne' shielding blocks. (author) [French] Ce rapport a pour objet de donner des precisions techniques au sujet des betons a haute densite qui ont pris une grande importance pour la protection biologique contre les rayonnements. Les agregats lourds les plus couramment utilises (barytine, ilmenite, ferrophosphore, limonite, magnetite et riblons) pour la fabrication de ces betons, sont examines du point de vue prospection et caracteristiques physiques et chimiques. On procede d'abord a une etude generale des betons de protection comprenant l'etude des constituants, de la confection et de la mise en place, ensuite, a un examen detaille de quelques betons a haute densite: betons a base de barytine, avec incorporation de riblons ou de grenaille de fonte, betons au ferrophosphore, a base d'ilmenite ou de magnetite, notamment en ce qui concerne la granulometrie, la composition, le dosage et les processus d'essais. Pour concretiser ces

  19. Meet EPA's Dan Nelson

    Science.gov (United States)

    EPA’s Dan Nelson is the Director of the Human Research Protocol Office at the National Health and Environmental Effect Research Laboratory, Dan works to protect the rights and welfare of EPA’s research participants.

  20. Bahasa, Simbol, dan Religi

    OpenAIRE

    Supriyadi, Supriyadi

    1999-01-01

    Manusia sering disebut sebagai makhluk sosial, makhluk berakal, makhluk berseni, dan sebagainya. Tulisan ini secara tidak langsung membicarakan manusia sebagai makhluk berbahasa, bersimbol, dan bereligi . Meskipun demikian, titik tolaknya bukan pada manusia itu sendiri, tetapi pada bahasa, simbol, dan religinya, terutama pada hubungan di antara ketiganya . Hubungan antara bahasa dan simbol tidak diragukan lagi karena bahasa merupakan jenis simbol . Demikian juga hubungan antara simbol dengan ...

  1. Représenter les lieux et les populations dans une colonie de peuplement: un siècle de recensements sud-africains / Mapping places and people in a settler society: From discrepancy to good fit over one century of South African censuses

    Directory of Open Access Journals (Sweden)

    Frédéric Giraut

    2012-08-01

    Full Text Available Depuis plus d'un siècle, l'Afrique du Sud a connu une remarquable série de recensements. Ceux-ci enregistrent la dynamique du peuplement dans le cadre de catégories socio-spatiales changeantes et liées aux représentations et projets successifs: coloniaux, d'apartheid et post-apartheid. Les premiers recensements proposaient une hiérarchisation des lieux typiques d'une colonie de peuplement. Le mouvement d'urbanisation, impliquant les populations non européennes, s'est traduit par l'évolution de la représentation officielle avec une reconnaissance progressive de localités autochtones. Sur un siècle, la géographie officielle des lieux de peuplement sud-africains est passée d'une perspective de société de pionniers à une perspective postcoloniale reconnaissant l'ensemble des communautés à travers leurs espaces.The dynamics of population and urbanization in South Africa have been recorded by a remarkable set of censuses during the 20th century. These censuses indicate a changing hierarchy of places that is typical of a settler society and of its representations of space and society. Over one century, the official census places and the pattern of population distribution have shifted from a selective colonial view of human settlements to an inclusive postcolonial society view closer to the distribution of the whole population.

  2. La première mondialisation. Quelle place pour l’Afrique dans l’histoire évolutive et biogéographique du genre Homo ? The first globalization. Which role for Africa in the evolutionary and biogeographical history of genus Homo?

    Directory of Open Access Journals (Sweden)

    Jean-Renaud Boisserie

    2011-01-01

    Full Text Available L’Afrique a hébergé notre évolution jusqu’à l’apparition du genre Homo et sa conquête de l’Eurasie il y a deux millions d’années environ. Et après, que s’est-il passé ? Les actes suivants ont-ils pris place en Eurasie, comme sous-entendu par l’expression « sortie d’Afrique » pour désigner cette conquête ? Dans cette contribution, les principales phases de cette « sortie » sont récapitulées sur la base des données fossiles, archéologiques et génétiques, et les différentes hypothèses sont brièvement discutées. Il apparaît que l’Afrique est restée le centre d’innovation et de dispersion de l’histoire évolutive humaine jusqu’à il y a quelques dizaines de milliers d’années.Africa hosted our evolution till the appearance of the genus Homo and its spreading over Eurasia about two million years ago. What happened afterwards? Did the following episodes take place in Eurasia, as suggested by the phrase “out of Africa” used to describe this conquest? The main phases of this “exit” are briefly described by using fossil, archeological, and genetic data; and alternative hypotheses, recapitulated. Africa apparently remained the center of innovation and dispersal in human evolutionary history up till a few tens of thousand years ago.

  3. Preparation and properties of thin films used in activity determinations with a 4 {pi} counter; Preparation et proprietes des films minces utilises dans les determinations d'activite au compteur 4 {pi}

    Energy Technology Data Exchange (ETDEWEB)

    Jannez, M.; Le Gallic, Y.; Thenard, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Comparative study of various methods of preparing thin films, for use as source holders in the 4 {pi} counter, and of measuring their thickness. Comparative study of various properties: mechanical resistance; heat resistance; ageing; resistance of rhodopas, polystyrene, formvar and cellulose acetate films to the action of various chemical agents. (author) [French] Etude comparee de divers procedes de preparation de films minces, destines a etre utilises comme supports de sources dans le compteur 4 {pi} et de la mesure de leur epaisseur. Etude comparee de diverses proprietes: resistance mecanique; resistance a la chaleur; vieillissement; resistance a l'action de divers agents chimiques de films de rhodopas, polystyrene, formvar et acetate de cellulose. (auteur)

  4. Preparation and properties of thin films used in activity determinations with a 4 {pi} counter; Preparation et proprietes des films minces utilises dans les determinations d'activite au compteur 4 {pi}

    Energy Technology Data Exchange (ETDEWEB)

    Jannez, M; Le Gallic, Y; Thenard, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Comparative study of various methods of preparing thin films, for use as source holders in the 4 {pi} counter, and of measuring their thickness. Comparative study of various properties: mechanical resistance; heat resistance; ageing; resistance of rhodopas, polystyrene, formvar and cellulose acetate films to the action of various chemical agents. (author) [French] Etude comparee de divers procedes de preparation de films minces, destines a etre utilises comme supports de sources dans le compteur 4 {pi} et de la mesure de leur epaisseur. Etude comparee de diverses proprietes: resistance mecanique; resistance a la chaleur; vieillissement; resistance a l'action de divers agents chimiques de films de rhodopas, polystyrene, formvar et acetate de cellulose. (auteur)

  5. Place Branding in Systems of Place

    DEFF Research Database (Denmark)

    Zenker, Sebastian; Andéhn, Mikael

    2015-01-01

    , this presents a challenge, since the role of a place in this system of geographical abstractions constitutes a piece of information more vital than any other in defining the place. Our understanding of places cannot be separated from their scale, and any effort at managing the reputation and meaning.......g. the European Union or Africa). Using the example of nation branding for Sudan and Slovenia, one can identify supranational places such as “sub-Saharan Africa” or “Eastern Europe”, carrying their own highly salient and often negative meaning in much of the Western world. We explore how association to a system...

  6. Analisis Kebijakan dan Efektivitas Organisasi

    Directory of Open Access Journals (Sweden)

    Amir Syarifudin Kiwang

    2015-05-01

    Full Text Available Penerapan Peraturan Gubernur Nusa Tenggara Timur Nomor 8 Tahun 2011 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Pendidikan dan Pelatihan Koperasi dan Usaha Mikro Kecil dan Menengah pada Dinas Koperasi dan Usaha Mikro Kecil dan Menengah Provinsi Nusa Tenggara Timur adalah dalam rangka untuk meningkatkan efektivitas kerja organisasi pada UPT Diklat Koperasi dan UMKM. Penelitian ini berusaha untuk melihat dampak kebijakan organisasi terhadap efektivitas organisasi dengan menggunakan enam elemen variabel dari kebijakan dan praktik manajemen. Keenam elemen tersebut adalah penetapan tujuan strategis, pencarian dan pemanfaatan sumber daya, lingkungan prestasi, proses komunikasi, kepemimpinan dan pengambilan keputusan, serta adaptasi dan inovasi organisasi. Penelitian kualitatif ini menggunakan pendekatan studi kasus. Teknik analisis data yang digunakan adalah analisis data model Miles dan Huberman, yang terdiri atas reduksi data, display/penyajian data, dan kesimpulan/verifikasi. Hasil penelitian menunjukkan bahwa efektivitas organisasi pada UPT Diklat koperasi dan UMKM belum berjalan secara baik, hal ini dapat dilihat dari beberapa hal antara lain, belum adanya tenaga spesialisasi pengelola diklat dan tenaga khusus (sarjana di bidang perkoperasian dan kondisi lingkungan kerja (lingkungan prestasi pada UPT Diklat koperasi dan UMKM yang belum efektif. Penempatan pegawai juga belum tepat, mutasi ke UPT Diklat Koperasi dan UMKM tidak memperhatikan latar belakang pendidikan dan spesialisasi/keahlian pegawai sehingga membutuhkan waktu dalam proses penyesuaian serta menurunkan jumlah pelaksanaan diklat dikarenakan keterbatasan alokasi dana.

  7. Etude theorique et experimentale des evaporateurs de dioxyde de carbone operant dans des conditions de givrage

    Science.gov (United States)

    Bendaoud, Adlane Larbi

    Les evaporateurs de refrigeration sont surtout du type tube a ailettes, appeles serpentins, et fonctionnent dans l'une des conditions suivantes: seche, humide ou avec formation de givre. Il a ete demontre que la formation du givre sur la paroi exterieure de l'echangeur engendre une surconsommation energetique a cause des operations de degivrage puisque 15 a 20% seulement de la chaleur produite sert au degivrage tandis que le reste est dissipee dans l'environnement [1]. Avec l'avenement des nouveaux refrigerants, moins nocifs envers l'environnement, l'industrie du froid se trouve penalisee du fait que peu ou pas de composantes mecaniques (compresseur, pompe, echangeur...etc.) adaptees sont disponibles [3]. Il s'agit pour la communaute des frigoristes de combler ce retard technologique en redeveloppant ces composantes mecaniques afin qu'elles soient adaptees aux nouveaux refrigerants. Dans cette optique, et afin de mieux comprendre le comportement thermique des evaporateurs au CO2 fonctionnant dans des conditions seches, qu'un groupe de chercheurs du CanmetENERGIE avaient lance, en 2000, un programme de R & D. Dans le cadre de programme un outil de simulation des evaporateurs au CO2 a ete developpe et un banc d'essai contenant une boucle secondaire de refrigeration utilisant le CO2 comme refrigerant a ete construit. Comme continuite de ce travail de recherche, en 2006 ce meme groupe de recherche a lance un nouveau projet qui consiste a faire une etude theorique et experimentale des evaporateurs au CO2 operants dans des conditions de givrage. Et, c'est exactement dans le cadre de ce projet que se positionne ce travail de these. Ce travail de recherche a ete entrepris pour mieux comprendre le comportement thermique et hydrodynamique des serpentins fonctionnant dans des conditions de givrage, l'effet des circuits de refrigerant ainsi que celui des parametres geometriques et d'operation. Pour cela, un travail theorique supporte par une etude experimentale a ete effectue

  8. TANGKI SEPTIK DAN MASALAHNYA

    Directory of Open Access Journals (Sweden)

    Sri Soewasti Soesanto

    2012-10-01

    Full Text Available Manusia yang sehat tiap hari membuang tinja yang harus ditampung dan/atau diolah secara saniter. Meskipun Indonesia telah 55 tahun merdeka dan telah memiliki banyak ahli sanitasi/teknik penyehatan baik lulusan dalam maupun luar negeri, namun cara pengelolaan tinja yang ada kebanyakan masih belum memenuhi syarat kesehatan. Tangki septik dianggap sebagai cara penampungan tinja yang terbaik, padahal sebenarnya masih terjadi pencemaran tanah dan air melalui saluran perembesan.Tangki septik (septic tank merupakan salah satu macam sarana pengolahan tinja manusia yang pada garis besarnya terdiri dari sebuah tangki pembusukan lumpur (sludge digester dan saluran perembesan efluen. Tangki pembusukan harus memenuhi syarat mengenai perbandingan panjang dan lebar serta syarat kedalaman maksimum dan minimum, agar pembusukan lumpur dari tinja manusia dapat berjalan sempurna malahan tidak berbau busuk lagi.

  9. Continuing bonds and place.

    Science.gov (United States)

    Jonsson, Annika; Walter, Tony

    2017-08-01

    Where do people feel closest to those they have lost? This article explores how continuing bonds with a deceased person can be rooted in a particular place or places. Some conceptual resources are sketched, namely continuing bonds, place attachment, ancestral places, home, reminder theory, and loss of place. The authors use these concepts to analyze interview material with seven Swedes and five Britons who often thought warmly of the deceased as residing in a particular place and often performing characteristic actions. The destruction of such a place, by contrast, could create a troubling, haunting absence, complicating the deceased's absent-presence.

  10. DEPRESI DAN GANGGUAN TIDUR

    Directory of Open Access Journals (Sweden)

    Wayan Eko Radityo

    2012-12-01

    Full Text Available Depresi merupakan gangguan mood berupa kesedihan yang intens, berlangsung dalamwaktu lama, dan mengganggu kehidupan normal yang insidennya semakin meningkatseiring dengan meningkatnya tekanan hidup. Tahun 2020, depresi diperkirakanmenempati urutan kedua penyakit di dunia. Gejala-gejala depresi terdiri dari gangguanemosi, gangguan kognitif, keluhan somatik, gangguan psikomotor, dan gangguanvegetatif. Salah satu gejala depresi yang muncul adalah gangguan tidur yang bisaberupa insomnia, bangun secara tiba-tiba, dan hipersomnia. Hal ini disebabkan olehgangguan neurotransmiter dan regulasi hormon. Selain sebagai gejala depresi, gangguantidur juga bisa merupakan penyebab depresi. Beberapa penelitian memberikanhubungan gangguan tidur dapat meningkatkan risiko depresi di kemudian hari.

  11. Keragaman dan Peran Biologi Arthrophoda pada Sawah Irigasi dan Tegalan

    OpenAIRE

    Suwarno, Suwarno

    2016-01-01

    Penelitian ini bertujuan untuk mengetahui keragaman arthropoda dan peran biologinya pada tanah sawah irigasi dan tegalan. Penelitian ini dilaksanakan di daerah persawahan di daerah Sragen pada bulan Maret – Mei 2016. Metode Penelitian dengan menggunakan pitfall trap atau perangkap jebakan yang diletakkan area persawahan dan tegalan. Teknik pengumpulan data dengan menggunakan purposive sampling. Sampel arthropoda yang diperoleh diidentifikasi dan dianalisis di Laboratorium pendidikan Biologi. ...

  12. My Place Is Not Your Place

    DEFF Research Database (Denmark)

    Zenker, Sebastian; Beckmann, Suzanne C.

    2013-01-01

    Purpose – Cities increasingly compete with each other for attracting tourists, investors, companies, or residents. Marketers therefore focus on establishing the city as a brand, disregarding that the perception and knowledge of a city differ dramatically between the target audiences. Hence, place...... branding should emphasize much more the perceptions of the different target groups and develop strategies for advanced place brand management. The aim of this paper is to assess the important discrepancies between the city brand perceptions of different target groups with the help of network analysis......-ended-question survey with 334 participants. Findings – Structural differences for the city brand perceptions of two different target groups and the differences between perceptions of an external and internal target group are highlighted. The results and the managerial implications for place marketers are discussed...

  13. Optimum input leads for cryogenic apparatus; Optimisation des descentes de courant dans des enceintes cryogeniques

    Energy Technology Data Exchange (ETDEWEB)

    Der Nigohossian, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-02-15

    The electrical leads used to introduce a current into a cryostat cause a heat influx due to thermal conduction and to Joule heating. It is very important to be able to minimize this flux. Theoretical calculation of optimized leads takes into account the varying heat and electrical conductivities of the leads as well as the heat exchange coefficient with the effluent gas. Practical results have been summarized in different tables which permit for a specific material i.e. copper, aluminium, brass, stainless steel with the intensity and end temperatures being known (i.e. 4,2 or 18,5 deg. K at the cold end; 77,295 or 320 deg. K at the warm end) to deduce the minimum heat flow and the length-cross section ratio of the optimized leads. A general method is indicated, which would allow to solve the same problem for other materials. (author) [French] Les conducteurs electriques assurant la liaison d'appareillages situes dans des cryostats apportent tant par effet Joule que par conductibilite thermique une certaine quantite de chaleur qu'il est tres important de pouvoir minimiser. L'etude theorique de l'optimisation des descentes de courant tient compte des variations des conductibilites thermique et electrique ainsi que de l'influence des echanges avec le gaz. Pratiquement les resultats ont ete resumes dans differents tableaux ce qui permet, pour un materiau donne tel que cuivre, aluminium, laiton, acier inoxydable, connaissant l'intensite et les temperatures d'extremites 4,2 et 18,5 deg. K d'une part, et 77,295 et 330 deg. K d'autre part, de deduire la consommation minimale et le rapport longueur-section d'un conducteur optimise. Une methode generale est indiquee, qui permet de resoudre le probleme pour d'autres materiaux. (auteur)

  14. Populated Places of Iowa

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — This coverage contains points that represent populated places, ie. cities, towns, villages or any other named place where people live. The coverage was developed...

  15. The importance of places and place branding

    NARCIS (Netherlands)

    Kovács, Z.; Musterd, S.; Musterd, S.; Kovács, Z.

    2013-01-01

    In the analytical part of this study, we highlight that, despite globalisation and growing uniformity, there is still an important role for place itself in the location decisions of economic players. Part III of this volume deals with this. Even though city-regions across the world have become

  16. Evaluasi Sifat Morpologi dan Teknologi Pengolahan pada Gabah dan Beras

    OpenAIRE

    Santosa, Susilo

    2017-01-01

    Penelitian evaluasi dan beras terhadap mutu dan jumlah hasil ditekankan pada lr36 , lr38 dan Cisadane. Penelitian dilakukan di laboratorium Balai Penelitian Tanaman Pangan Karawang. Hasil studi menunjukkan diantara ketiga varitas, Cisadane mempunyai ukuran dimensi butiran yang lebih besar daripada Ir36 dan Ir38. Di antara ketiga varitas, persen kulit sekam yang tertinggi didapat 23,57 % pada lr38 diikuti 22,32% pada Ir36 dan 19,5% pada Cisadane. Persen beras pecah kulit tertinggi diperoleh pa...

  17. Evaluasi Sifat Morpologi Dan Teknologi Pengolahan Pada Gabah Dan Beras

    OpenAIRE

    Santosa, Susilo

    1982-01-01

    Penelitian evaluasi dan beras terhadap mutu dan jumlah hasil ditekankan pada lr36 , lr38 dan Cisadane. Penelitian dilakukan di laboratorium Balai Penelitian Tanaman Pangan Karawang. Hasil studi menunjukkan diantara ketiga varitas, Cisadane mempunyai ukuran dimensi butiran yang lebih besar daripada Ir36 dan Ir38. Di antara ketiga varitas, persen kulit sekam yang tertinggi didapat 23,57 % pada lr38 diikuti 22,32% pada Ir36 dan 19,5% pada Cisadane. Persen beras pecah kulit tertinggi diperoleh pa...

  18. Place in Transition

    DEFF Research Database (Denmark)

    Mikkelsen, Jacob Bjerre; Lange, Ida Sofie Gøtzsche

    from the 'Everyday World'. Within mobilities studies, research has focused on different aspects and consequences of the post-oil society (see Dennis & Urry 2009, Urry 2013). This paper discusses the conception of place within the enclosed 'Oil World' with point of departure in relocation...... and redefinition of oil rigs from an urban design perspective. The paper constitutes a theoretical basis for future design scenarios - exemplified through visionary urban design proposals for a specific site in the city of Esbjerg, Denmark. Relocating rigs to an urban context initiates discussions of conception...... of 'Place' questioning the fixity of 'Place' (Jensen 2010). Scoped through a relational sense of place (Massey 1993) and the potential of exploring new relations between places (Burns & Kahn 2005), the paper challenges the notion of 'Place as God' (Hvattum 2010). These places in transition contest...

  19. Turbulent conductivity in parallel with iso-velocities in a planar established flow; Conductibilite turbulente parallelement aux isovitesses dans un ecoulement plan en regime etabli

    Energy Technology Data Exchange (ETDEWEB)

    Jullien, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires, Direction des piles atomiques

    1968-02-01

    In this thesis are presented the experimental results obtained during the study of the turbulent diffusion of heat using a wire source in a flat air flow. The Taylor statistical theory laws are well respected in the domain studied. The experiments have made it possible to evaluate the influence of the Reynolds number and of the distance from the wall on the quadratic values of velocity fluctuations and on the Lagrange turbulence scales. In particular, the author has found a correlation between the Lagrange scales and the friction coefficient when the Reynolds number varies. A diffusion law is derived from the Taylor theory; it makes it possible to explain more clearly the idea of turbulent conductivity. (author) [French] Cette these presente les resultats experimentaux de l'etude de la diffusion turbulente de la chaleur a partir d'un fil source dans un ecoulement d'air plan. Les lois de la theorie statistique de Taylor sont bien verifiees dans le domaine d'etude. Les experiences ont permis d'evaluer l'influence du nombre de Reynolds et de la distance a la paroi sur les valeurs quadratiques des fluctuations de vitesse et les echelles lagrangiennes de turbulence. En particulier, l'auteur a trouve une correlation entre les echelles lagrangiennes et le coefficient de frottement lorsque le nombre de Reynolds varie. Comme consequences de la theorie de Taylor, une loi de diffusion est etablie et permet de preciser la notion de conductibilite turbulente. (auteur)

  20. Non-Destructive Examination of the Heat-Affected Zone of Welded Zr-Nb Alloy; Controle Non Destructif de la Zone d'Un Alliage Zr-Nb Affectee par la Chaleur Lors du Soudage; Nedestruktivnoe ispytanie zony svarnogo shva iz tsirkonij-niobij splava, kotoryj podverzhen teplovomu vliyaniyu; Examen No Destructivo de la Zona de Soldadura Afectada por el Calor en las Aleaciones de Circonio y Niobio

    Energy Technology Data Exchange (ETDEWEB)

    Hanstock, R. F.; Walker, D. C.B. [U.K.A.E.A. Reactor Materials Laboratory, Culcheth (United Kingdom)

    1965-10-15

    chaleur qui sont susceptibles de corrosion pouvaient etre decelees par controle non destructif, en mesurant le potentiel thermoelectrique aux bornes d'une sonde metallique chauffee, en contact avec des parties determinees de la soudure et le metal adjacent. La sonde thermoelectrique est similaire a celle mise au point par l'Association britannique de recherches sur les metaux non ferreux en vue de mesurer l'epaisseur des revetements de plaques de metal; un instrument en vente sur le marche et muni de ce type de sonde peut etre utilise, apres une legere modification, pour le controle des soudures dans les alliages Zr-Nb. Le memoire donne un exemple de la variation de la reponse de la sonde dans des zones affectees par la chaleur lors du sondage; les resultats sont compares a ceux d'un examen en autoclave. (author) [Spanish] Las aleaciones de circonio con 2 Vulgar-Fraction-One-Half % de niobio ofrecen, gracias al tratamiento termico, la ventaja de resistir la presion en los reactores moderados por agua. Por otra parte, ese tratamiento afecta considerablemente a la resistencia a la corrosion en las condiciones de funcionamiento del reactor, siendo de seuealar que pueden surgir puntos especialmente vulnerables en las zonas de las soldaduras sometidas al calor. Las zonas susceptibles de corrosion pueden localizarse mediante tratamiento en autoclase, pero no es conveniente aplicarlo cuando extensos circuitos de presion se arman mediante soldadura. Se ha comprobado que las zonas afectadas por el calor que son vulnerables a la corrosion pueden localizarse por metodos no destructivos consistentes en medir el potencial termoelectrico entre la punta de una sonda metalica caliente en contacto con determinadas partes de la soldadura y el del metal adyacente. La sonda es analoga a la que ha diseueado la British-ferrous Metals Research Association para medir el espesor del chapado de sustratos metalicos. Los instrumentos comerciales equipados con ese tipo de sonda sirven con una

  1. KOSAKATA SISTEM PERTANIAN TRADISIONAL SUNDA: KAJIAN STRUKTUR DAN MAKNA

    Directory of Open Access Journals (Sweden)

    Taufik Setyadi Aras

    2018-03-01

    Full Text Available Identity of Indonesia as agrarian country begins fading. A lot of the traditional farmers change their job to industrial sectors then impacting on behavior patterns of society to the environment and reducing the knowledge and skills in the traditional farming. The issues examined are the vocabulary of Sundanese traditional agricultural systems by using study the structure and semantics. The method used in this research is a qualitative descriptive method. This research applies some theories from Djajasudarma (2009 and 2013, Kridalaksana (2005, and Ramlan (1991. The results of this study that a category of vocabulary of Sundanese traditional agriculture systems divide into four classes, verbs and verbal, nouns and nominal, numeralia, derivative formand adjectives. The structure divides into two forms; base form and derivative form. Derivative form has four types, affixation, reduplication, acronym, and the combined of word. The meaning of vocabulary referring to tools and equipment, cultivation activities, circumstances and conditions of paddy, planting, place and crock, time, traditional ceremonies, community leaders’ rice pests, and size or dosage. ABSTRAK Identitas Indonesia sebagai negara agraris mulai luntur. Tidak sedikit petani tradisional beralih pekerjaan ke sektor industri sehingga berdampak pada pola perilaku masyarakat terhadap lingkungan serta mengikis pengetahuan dan keterampilan dalam tata cara bertani tradisional. Masalah yang diteliti adalah kosakata sistem pertanian tradisional berbahasa Sunda dengan menggunakan kajian struktur dan makna. Metode yang digunakan adalah metode deskriptif kualitatif. Teori yang digunakan yaitu teori Djajasudarma (2009 dan 2013, Kridalaksana (2005, dan Ramlan (1991 . Berdasarkan penelitian, diketahui empat kelas kata yang ditemukan, yaitu verba(l, nomina(l, numeralia, dan adjektiva. Struktur kosakata ada dua bentuk, yaitu bentuk dasar dan turunan. Bentuk turunan ada empat, yaitu berdasarkan

  2. Place-Specific Computing

    DEFF Research Database (Denmark)

    Messeter, Jörn

    2009-01-01

    An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design that add......An increased interest in the notion of place has evolved in interaction design based on the proliferation of wireless infrastructures, developments in digital media, and a ‘spatial turn’ in computing. In this article, place-specific computing is suggested as a genre of interaction design...... that addresses the shaping of interactions among people, place-specific resources and global socio-technical networks, mediated by digital technology, and influenced by the structuring conditions of place. The theoretical grounding for place-specific computing is located in the meeting between conceptions...... of place in human geography and recent research in interaction design focusing on embodied interaction. Central themes in this grounding revolve around place and its relation to embodiment and practice, as well as the social, cultural and material aspects conditioning the enactment of place. Selected...

  3. KORELASI ANTARA BIMBINGAN KONSELING ISLAM DAN DAKWAH

    Directory of Open Access Journals (Sweden)

    Marzuki Agung Prasetya

    2015-11-01

    Full Text Available Dakwah merupakan kegiatan untuk menyeru, memanggil dan mengajak orang lain menuju jalan yang diridhai Allah. Bimbingan dan Konseling Islam merupakan cabang dalam rumpun ilmu-ilmu sosial yang mulai dikembangkan sebagai disiplin ilmu yang mandiri. Keberadaan aktifitas bimbingan dan konseling Islam tersebut didasarkan pada kenyataan bahwa dalam menghadapi dan menyelesaikan masalah, ada individu yang mampu menyelesaikan sendiri, namun ada juga yang membutuhkan bantuan pihak lain. Dalam prakteknya bimbingan konseling akan mengacu pada beberapa pendekatan, diantaranya: pendekatan behavioristik, psikodinamika, eklektik, psikoanalisa dan eksistensial humanistik. Pendekatan tersebut dipilih berdasarkan kondisi klien, masalah yang dihadapi, kemampuan konselor selaku pihak yang memberikan bimbingan maupun kondisi dan situasi pada saat bimbingan konseling berlangsung. Menurut Hamdan Bakran ad-Dzaky, bimbingan konseling Islam merupakan suatu aktifitas memberikan bimbingan, pelajaran,dan pedoman kepada individu yang meminta bimbingan (klien dalam hal bagaimana seharusnya dirinya dapat mengembangkan akal dan pikirannya, jiwanya, keimanannya dan keyakinannya, serta dapat menanggulangi problematika hidup dengan baik dan benar sacara mandiri, yang berparadigma kepada Al-Quran dan as-Sunnah Rasulullah saw. Proses pelaksanaan bimbingan konseling Islam mengacu pada prinsip- prinsip etika berdakwah dalam Islam, yakni bi al-hikmah, al-mauidhah hasanah, dan al-mujadalah bi al-lati hiya ahsan. Tulisan ini melihat relasi antara bimbingan konseling Islam dan dakwah, sehingga dapat diketahui bagaimana hubungan yang terjalin antara keduanya. Kata Kunci: Dakwah, Bimbingan, Konseling Islam. THE CORRELATION BETWEEN ISLAMIC COUNSELING GUIDANCE AND DAWA. Dawa is an activity to call and invite others towards the path of Allah. Islamic Guidance and Counselling is a branch of social sciences which began to be developed as an independent discipline. The existence of the Islamic

  4. Les collectivités : une source de déchets organiques et une voie de valorisation de la chaleur pour la méthanisation agricole ?

    Directory of Open Access Journals (Sweden)

    LEVASSEUR, Pascal ; CHARPIOT, Alicia ; LE GUEN, Gaëlle

    2013-10-01

    Full Text Available Un des intérêts de la méthanisation est qu'elle peut participer à un recyclage extrêmement rentable des déchets. De fait, les collectivités ont un rôle à jouer dans ce processus car elles génèrent de nombreux types de déchets. Mais dans quelles mesures leur participation est-elle actuellement intéressante ? La volonté d'aboutir à une plus grande efficacité induit des changements de comportement de la part des foyers et des institutions. Quels sont-ils?

  5. The value of place

    Science.gov (United States)

    Dentzau, Michael W.

    2014-03-01

    This commentary seeks to expand the dialogue on place-based science education presented in Katie Lynn Brkich's article, where the connections fifth grade students make between their formal earth science curriculum and their lived experiences are highlighted. The disconnect between the curriculum the students are offered and their immediate environment is clear, and we are presented with examples of how they strive to make connections between the content and what they are familiar with—namely their surroundings. "Place" is identified as a term with complex meanings and interpretations, even in the scope of place-based science education, and understanding how the term is used in any given scenario is essential to understanding the implications of place-based education. Is place used as a location, locale or a sense of place? To understand "place" is to acknowledge that for the individual, it is highly situational, cultural and personal. It is just such attributes that make place-based education appealing, and potentially powerful, pedagogically on one hand, yet complex for implementation on the other. The argument is posed that place is particularly important in the context of education about the environment, which in its simplest manifestation, connects formal science curriculum to resources that are local and tangible to students. The incorporation of place in such a framework seeks to bridge the gap between formal school science subjects and students' lived experiences, yet acknowledges the tensions that can arise between accommodating place meanings and the desire to acculturate students into the language of the scientific community. The disconnect between guiding policy frameworks and the reality of the Next Generation Science Standards is addressed opening an avenue for further discussion of the importance of socio-cultural frameworks of science learning in an ever increasing era of accountability.

  6. Technical training: places available

    CERN Multimedia

    HR Department

    2007-01-01

    CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

  7. A Sense of Place

    Directory of Open Access Journals (Sweden)

    Rachel Black

    2012-09-01

    Full Text Available People increasingly want to know where their food and wine comes from and who produces it. This is part of developing a taste of place, or what the French call terroir. The academic and industry debates surrounding the concept of terroir are explored, and the efforts of Massachusetts wine producers to define their sense of place are discussed.

  8. Place in transition

    DEFF Research Database (Denmark)

    Mikkelsen, Jacob Bjerre; Lange, Ida Sofie Gøtzsche

    2017-01-01

    World. This paper discusses the conception of place in the Oil World, with the relocation and transformation of oil rigs from an urban design perspective as its point of departure, using Esbjerg, Denmark, as a case study. Combining a theoretical understanding of places as relational with a design...

  9. Connecting people to place

    NARCIS (Netherlands)

    Horlings, L.G.

    2016-01-01

    The article describes a process of preparing a research design on place-shaping, as outcome of a process of co-design between academic actors and non-academic actors in Brazil, South Africa and The Netherlands, taking place in the context of the project TRANSPLACE. The joint research design

  10. The Case for Place

    Science.gov (United States)

    Thomas, Lisa Carlucci

    2012-01-01

    Bookstores, record stores, libraries, Facebook: these places--both physical and virtual--demonstrate an established and essential purpose as centers of community, expertise, convenience, immediacy, and respect. Yet as digital, mobile, and social shifts continue to transform culture and interactions, these spaces and places transform, too.…

  11. Le cheval dans la péninsule Arabique

    OpenAIRE

    Berriah, Mehdi; Carayon, Agnès; Honvault, Juliette; Mahoney, Daniel; Maigret, Sabina Antonini de; Nicolle, David; Olsen, Sandra L.; Pétriat, Philippe; Pouillon, François; Robin, Christian Julien; Schiettecatte, Jérémie; Tatibouet-Sadki, Gabriel; Zouache, Abbès

    2017-01-01

    Depuis des siècles, le cheval occupe une place importante dans l’identité des habitants de la péninsule Arabique. Pourtant, la date de son introduction dans la péninsule comme les origines du pur-sang arabe ne sont pas définitivement établies. De même, de nombreuses questions restent sans réponse quant au rôle qu’il joua dans la péninsule comme dans les territoires adjacents après l’avènement de l’islam. De telles incertitudes sont à même de stimuler la réflexion. Cependant, elles peuvent aus...

  12. Liever kraanwater dan bronwater

    NARCIS (Netherlands)

    Kole, A.P.W.

    2011-01-01

    Een test in het Restaurant van de Toekomst van de invloed van CO2-labels op het aankoopgedrag van consumenten, heeft nog geen duidelijk beeld opgeleverd. Wel pakten mensen vaker kraanwater dan bronwater.

  13. Dan Performer Mei Lanfang

    DEFF Research Database (Denmark)

    Risum, Janne

    2010-01-01

    The convention of performing female characters (dan characters) in Beijing opera, as practised by its most prominent male performer of female characters Mei Lanfang, and its and his cultural context and aesthetic aim...

  14. Non-Place

    DEFF Research Database (Denmark)

    formulation. The anthology contains 17 articles engaged directly in the application, retrofitting and broadening of the concept of the non-place to a range of literary and media texts, as well as the merging of this concept to other theoretical concepts by e.g. Michel Foucault, Gilles Deleuze, Alain Badiou......We spend more and more of our everyday lives in what Marc Augé calls non-places – homogenous, but bland places of transit. This anthology addresses the representations of non-places in literature, culture and media, and critiques and re-actualizes Augé’s work twenty years after its initial...... Jutland, and many others. This anthology is the seventh publication in the IRGiC series and it springs from a research seminar held at Aalborg University in May 2013: “Non-Place in Literature, Media and Culture”....

  15. Place-Specific Computing

    DEFF Research Database (Denmark)

    Messeter, Jörn; Johansson, Michael

    project place- specific computing is explored through design oriented research. This article reports six pilot studies where design students have designed concepts for place-specific computing in Berlin (Germany), Cape Town (South Africa), Rome (Italy) and Malmö (Sweden). Background and arguments...... for place-specific computing as a genre of interaction design are described. A total number of 36 design concepts designed for 16 designated zones in the four cities are presented. An analysis of the design concepts is presented indicating potentials, possibilities and problems as directions for future......An increased interest in the notion of place has evolved in interaction design. Proliferation of wireless infrastructure, developments in digital media, and a ‘spatial turn’ in computing provides the base for place-specific computing as a suggested new genre of interaction design. In the REcult...

  16. Technical training - places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

  17. Where is 'place' in Aging in place?

    DEFF Research Database (Denmark)

    Blaakilde, Anne Leonora

    2015-01-01

    is influenced by universalism, aiming at equality in terms of access to health services and care. However, these welfare provisions seem to be deeply embedded in methodological nationalism, since only citizens with residence within the borders of Denmark have the right to live in public nursing homes or receive......The aim of this article is to contribute a transnational perspective to the field of environmental gerontology and the concept of aging in place. Seniors from the northern hemisphere, among them Danish citizens, are increasingly adapting to transnational lives as they move to warmer climates...... in-home help. It is argued that we should consider public solutions to the problems faced by frail Danish citizens in transnational settings, enhancing their opportunities to live abroad....

  18. Context in place

    DEFF Research Database (Denmark)

    Nordentoft, Helle Merete; Thomsen, Rie

    specifically argue for a more grounded approach to the conception of context - a topographic approach - in which the physical setting - i.e. 'the place' becomes an inevitable part of analyses of guidance practices in order to understand participants' sense-making processes. In the paper we draw on two case...... studies on interdisciplinary clinical supervision and work place guidance in which there appears to be a mismatch between intended outcomes and actual events. The analyses demonstrate and support that 'the place' seems - to influence partipants' responses in the guidance sessions and, therefore, must...

  19. Technical training - Places available

    CERN Document Server

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

  20. Planned place of birth

    DEFF Research Database (Denmark)

    Overgaard, Charlotte; Coxon, Kirstie; Stewart, Mary

    Title Planned place of birth: issues of choice, access and equity. Outline In Northern European countries, giving birth is generally safe for healthy women with uncomplicated pregnancies, and their babies. However, place of birth can affect women’s outcomes and experiences of birth. Whilst tertiary...... countries, maternity care is provided free to women, through public financing of health care; universal access to care is therefore secured. Nevertheless, different models of care exist, and debates about the appropriateness of providing maternity care in different settings take place in both countries...... in Denmark Coxon K et al: Planned place of birth in England: perceptions of accessing obstetric units, midwife led units and home birth amongst women and their partners. How these papers interrelate These papers draw upon recent research in maternity care, undertaken in Denmark and in England. In both...

  1. History, Criticism and Place

    DEFF Research Database (Denmark)

    Hinds, Mat; Carter, Adrian; Malpas, Jeff

    2012-01-01

    Rory Spence and Richard Leplastrier shared a conversation and friendship that lasted 20years until Spence's death in 2004. The discussions focused largely upon issues of place, distilled through the practice of Leplastrier....

  2. Marine Place Names

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the geographic place names for features in the U.S territorial waters and outer continental shelf. These names can be used to find or define a...

  3. Self-Placing Concrete

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    Certain concrete pours have areas where the congestion of reinforcing bars make placement of concrete almost impossible. Using conventional placing and vibration techniques, the resulting concrete can have considerable honeycombing due to the development of voids. Self-placing concrete is a possible solution to the problem. Also known as self-compactable concrete, self-consolidating concrete, flowable concrete, and non-vibration concrete. These concretes eliminate the need for vibration in a ...

  4. 'A Place to Sit'

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier; Klok, Julie Skovgaard; Bøhnke, Mia Marker

    Published in 2014 on the occasion of the third 'A Place to Sit' exhibition as a reflection upon three years of teaching tectonic method in architecture using the furniture scale as a learning basis.......Published in 2014 on the occasion of the third 'A Place to Sit' exhibition as a reflection upon three years of teaching tectonic method in architecture using the furniture scale as a learning basis....

  5. PREFERENSI PEMBIAYAAN USAHA MIKRO DAN KECIL : PERSPEKTIF GENDER DAN ENTREPRENEURABILITY

    Directory of Open Access Journals (Sweden)

    Khaira Amalia Fachrudin

    2013-06-01

    Full Text Available Preferensi pembiayaan dalam perusahaan besar lebih didasarkan pada karakteristik perusahaan tersebut.  Namun dalam usaha mikro dan kecil hal ini mungkin berbeda dan bergantung pada karakteristik pemiliknya seperti gender dan entrepreneurability.   Perbedaan gender mungkin juga membedakan entrepreneurability dan dukungan yang diterima.  Penelitian ini akan menguji apakah terdapat perbedaan preferensi pembiayaan berdasarkan gender, entrepreneurability berdasarkan gender dan berdasarkan preferensi pembiayaan, serta perbedaan dukungan berdasarkan gender.  Sampel dari usaha mikro dan kecil yang bergerak dalam bidang kuliner  diuji dengan uji beda Independent Sample t Test dan kemudian dengan Crosstabulation untuk lebih memperinci hasilnya.  Hasil uji menunjukkan bahwa tidak terdapat perbedaan yang signifikan preferensi pembiayaan berdasarkan gender dan berdasarkan  entrepreneurability, namun entrepreneurability berbeda signifikan berdasarkan gender dan juga ditemukan bahwa dukungan moral, tenaga, dan modal yang diterima pemilik usaha pria dan wanita tidak berbeda signifikan (p value lebih kecil dari 0.05.   Hasil ini menunjukkan bahwa terdapat kesetaraan gender dalam pembiayaan usaha dan entrepreneurability lebih tinggi pada pria.  Pria pemilik usaha juga mendapatkan dukungan tenaga kerja yang lebih banyak daripada wanita.  Dukungan tenaga ini adalah salah satu bentuk  financial bootstrapping karena dapat mengurangi pembiayaan usaha

  6. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

  7. DETEKSI DAN MANAJEMEN REFEEDING SYNDROME

    OpenAIRE

    Darmadi Darmadi; Riska Habriel Ruslie

    2012-01-01

    AbstrakRefeeding syndrome (RFS) dideskripsikan sebagai perubahan biokimiawi, manifestasi klinis dan komplikasi sebagai konsekuensi pemberian nutrisi pada pasien kurang gizi. Refeeding syndrome ini menyebabkan dampak buruk dan kematian. Sindroma ini lebih sering terjadi pada kelompok risiko. Refeeding syndrome merupakan suatu sindroma yang sering tak terdiagnosis oleh karena itu perlu peningkatan pengetahuan dan kesadaran dari tenaga medis untuk mengurangi morbiditas dan mortalitas dari RFS. K...

  8. Images dans Dans le leurre du seuil d'Yves Bonnefoy | Amavi ...

    African Journals Online (AJOL)

    With “Dans le leurre du seuil”, the problematic of figures in the work is linked to a very strong seduction that figures exert on the poet and the latter's will to resist it. Bonnefoy's poetry, because of figures, is at risk of substituting dream to reality, of forgetting finitude, of turning “true fact” into a representation, “another place, ...

  9. INOVASI DAN STRATEGI PENCAPAIANNYA

    Directory of Open Access Journals (Sweden)

    Liem Ferryanto

    2009-01-01

    Full Text Available Innovation is the way of life of any institution to profitably sustain its life. It starts with empathy, the ability to reach outside of ourselves and walk in someone else’s shoes, and optimal implementation of the newly advanced technology. Innovation shows its results through continuously hard working efforts known as "10 Thousand Hours Rule". As world uncertainty creates complexity we, instead of predicting, should therefore anticipate the future by creating and managing real options on contingent projects or elements of alternative optimal strategies. This should reflect into our portfolio strategy. Abstract in Bahasa Indonesia: Inovasi merupakan darah bagi suatu institusi untuk bisa hidup berkelanjutan serta menguntungkan. Inovasi berupa penemuan baru secara sistematis yang berawal dari empati, kemampuan untuk melihat dunia melalui mata orang lain, dan pemanfaatan secara optimal kemajuan teknologi yang ada. Inovasi baru menghasilkan buahnya melalui kerja keras, yaitu dengan mengikuti “Aturan 10 Ribu Jam” secara berkesinambungan. Ketidakpastian, interaksi, keterbatasan dan degradasi menciptakan kompleksitas tentang kebutuhan dan solusi di masa depan. Oleh sebab itu daripada meramalkan risiko yang bakal terjadi, kita sebaiknya memasang strategi berupa skenario untuk mereduksi akibat dari risiko masa depan yang tidak kita mengerti. Skenario ini dapat diperoleh lewat penciptaan dan penanganan beberapa pilihan nyata atas semua proyek antisipatif yang ada. Kata kunci: Inovasi, ketidakpastian dan kompleksitas, aturan 10 ribu jam, paradoks strategi, peta jalan, empati, kerja berkesinambungan.

  10. HARMONI KEHIDUPAN SOSIAL BEDA AGAMA DAN ALIRAN DI KUDUS

    Directory of Open Access Journals (Sweden)

    Moh Rosyid

    2015-11-01

    secara bersama-sama antara warga, tokoh, dan perangkat pemerintahan. Warga mayoritas tidak mudah tersulut pemberitaan media dan gosip yang tertebar setiap saat untuk menerkam yang minoritas. Terwujudnya toleransi beragama antar dan intern umat beragama dapat dilakukan dengan mengoptimalkan pendekatan budaya dan keharmonisan sosial. Dengan demikian, pendekatan yang menggunakan aspek keamanan secara alami ternafikan. Kata Kunci: Nirkonflik, Antar Umat dan Intern Umat Beragama, Aliran Agama. HARMONY OF SOCIAL LIFE OF DIFFERENT RELIGION IN KUDUS. Internal and interreligious conflict has colored social reality in this country. The most important thing to solve the problem is finding its fundamental cause. However, religious life among the society does not necessarily mean conflict or religious differences is not identical with conflict. Research conducted 2012 in Colo Village, Dawe, Kudus, Central Java shows that people from different religious background has created harmony among themselves. This research uses observation and interview to collect data from the research field and applies descriptive qualitative analysis. In 2012 the population in Colo is 4.327 people consisting of 2.400 family in which the majority are Moslem. There are also 16 Christians, 40 Buddhists and 14 Ahmadiyahs family living in one village. All religious adherents build their own sacred places consisting of five mosques (the Muria Mosque in Muria Mountain built by the Central Java Provincial government, two mosques in Colo village and a mosque built by Ahmady people, 11 mushalla (Muslim prayer house spread in four hamlet of Colo, a church beside a vihara. The vihara was built during Gus Durs presidency. In addition, there are two private Islamic schools, two elementary schools, a private junior Islamic high school (MTs, a private senior Islamic high school (MA, three Quranic learning centers, a kindergarten and an Islamic playgroup. Religious harmony among the society in Colo is established through

  11. PENGELOLAAN PENELITIAN DAN PENGEMBANGAN KESEHATAN DI THAILAND, MYANMAR, DAN INDIA

    Directory of Open Access Journals (Sweden)

    Anorital, SKM Anorital, SKM

    2012-09-01

    Full Text Available Dalam bulan Januari 1991 yang lalu, Sdr. Anorital, SKM (Ka. Subbag. Pengumpulan dan PengolahanData Badan Litbangkes dan H. Syafwani Mirin, SKM (Ka. Bag. Keuangan Badan Litbangkes memperoleh fellowship dari WHO untuk melakukan studi perbandingan ke institusi-institusi penelitian kesehatan di Thailand,Myanmar, dan India.Berikut di bawah ini tulisan bersangkutan yang menggambarkan secara garis besar pengelolaan penelitian dan pengembangan kesehatan pada masing-masing negara obyek studi. Semoga informasi yang terkandung pada tulisan ini dapat bermanfaat bagi pengembangan Badan Penelitian dan Pengembangan Kesehatan.

  12. (Re)tasting places

    DEFF Research Database (Denmark)

    Hedegaard, Liselotte

    2015-01-01

    What does geographical origin mean? It is an expression that associates food and wine with a specific place, an association embedded in the concept ‘terroir’ that refers to the complex interaction between a physical environment and local craftsmanship. It is a claim protected through labelling......-schemes and a claim that adds value to the place-related foods. However, viewing the connection between food and place as a question of proving a relationship or as a matter of protecting commercial claims does not seem to provide a satisfactory account for the status of geographically designated foods as being...... particularly attractive Central to the interest of this paper is to approach an understanding of geographical origin as a point of reference for taste. In terms of being sensory experience, taste is subjective. It is difficult to describe verbally and yet at the same time it is a trigger of the memory of past...

  13. Brand new authentic places

    DEFF Research Database (Denmark)

    Stender, Marie

    the relation and interplay between the two. This study strives to fill this gap by ethnographically tracing the process from design to occupancy including the role of branding as a means to create authenticity. The concept of authenticity is often associated with old houses and neighbourhoods, but also in new......How are places and material surroundings ascribed with meaning when new residential neighbourhoods are designed, branded and taken into use? Existing research on housing, neighbourhoods and urban design tends to take the perspective of either the architect or the user rather than to explore...... neighbourhoods stories of authenticity seems to be of great importance giving value and identity to place and people. By way of design and branding new places are implied with notions of the real, the original and the unique referring to e.g. its historical past, architectural uniqueness, sustainability or sense...

  14. Stress at Work Place

    OpenAIRE

    Mohammad A. Shahrour

    2010-01-01

    One of hardest forms of stresses to avoid is that work place or job stress Job stress refers to stress experienced by an individual at or because of issues at their work place The term work related stress has many meanings and it causes different levels of anxiety. Not all challenges at work can be called stress as some of these challenges drive employees upward, and empower them to learn new skills or push them to work harder to achieve a certain goal. So, this type of challenges cannot be c...

  15. Ageing in communal place

    DEFF Research Database (Denmark)

    Aarhus, Rikke; Ballegaard, Stinne Aaløkke; Grönvall, Erik

    2009-01-01

    In this paper we adopt the position that design of social media for the elderly and virtual senior communities may be informed by studying `real´senior communities. Since current research efforts target the role of social media and virtual communities for supporting seniors ageing in place, i.......e. in their homes, housing communities seems a natural place to begin this enquiry. We conducted observations and informal interviews in six different senior dwellings. In this paper we present the key findings from these visits related to social interaction and the formation of communities and explicate how...

  16. Protection for work in the pressure tank of the pile G2; Protection des travaux dans le caisson de la pile G2

    Energy Technology Data Exchange (ETDEWEB)

    Chassany, J Ph; Rodier, J [Commissariat a l' Energie Atomique, Service de Protection contre les Radiations, Marcoule (France). Centre d' Etudes Nucleaires

    1961-07-01

    While the pile was shut down after a three-month run at full power, the secondary circuit was cleaned and some alterations were carried out. The pile contained 100 tons of uranium, half of which made up the periphery and was irradiated uranium. The possibility of carrying on work inside the pressure tank was not considered at the time of construction. Because of the heat and the irradiation it was only possible to remain in the pressure tank for a limited period of time, and several operators received doses of the order of 1.5 rem. Cotton clothing gave satisfactory protection against contamination and was more comfortable than the vinyl equipment. The work lasted for 17 days and involved 881 incursions into the pressure tank. (author) [French] Un nettoyage et des modifications ont ete realises dans le circuit secondaire pendant l'arret de la pile apres un fonctionnement de trois mois a pleine puissance. La pile contenait 100 tonnes d'uranium dont la moitie, composant la peripherie, etait de l'uranium irradie. La possibilite d'entreprendre un travail a l'interieur du caisson n'avait pas ete envisage lors de la construction. Le temps de sejour dans le caisson etait a la fois limite par l'irradiation et la chaleur, plusieurs operateurs, ont integre une dose de l'ordre de 1,5 rem. Les vetements de coton ont apporte une protection contre la contamination satisfaisante et un confort relatif par rapport aux equipements de vinyle. L'intervention a dure 17 jours, a comporte 881 entrees dans le caisson. (auteur)

  17. Technical training - Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

  18. The Value of Place

    Science.gov (United States)

    Dentzau, Michael W.

    2014-01-01

    This commentary seeks to expand the dialogue on place-based science education presented in Katie Lynn Brkich's article, where the connections fifth grade students make between their formal earth science curriculum and their lived experiences are highlighted. The disconnect between the curriculum the students are offered and their immediate…

  19. The power of place.

    Science.gov (United States)

    Lock, Lin R; Gibb, Heather J

    2003-06-01

    to describe the power that 'place' holds over the postnatal-care experiences of women. a study informed by phenomenology within a feminist framework was undertaken to examine the experiences of women electing early postnatal discharge. Three extended conversations with each woman participating in the study were audiotaped and transcribed. Journal notes made by the researcher added to the audiotaped data. Thematic analysis revealed major structures of experience. data were obtained from conversations with women in their respective homes. five women, parity 1-3, living in the Sydney metropolitan area and birthing in their local hospitals participated in the study. four major constructs of experience were revealed through analysis and include spatiality, corporeality, temporality and relationality. In this paper, components of spatiality expressed through the power place exerts in matters of physical environment,control, confidence, safety, time, talk and the heart of the matter are presented. the experiences of women entering the foreign place of hospital to birth their children were those of alienation and disempowerment while the familiar territory of home offered stronger feelings of security and support. failing to recognise the impact of place on the experiences of postnatal women reduces the likelihood that midwives will be able to offer sensitive and appropriate care.

  20. Ageing in Communal Place

    DEFF Research Database (Denmark)

    Aarhus, Rikke; Ballegaard, Stinne Aaløkke; Grönvall, Erik

    2009-01-01

    In this paper we adopt the position that design of social media for the elderly and virtual senior communities may be informed by studying ‘real’ senior communities. Since current research efforts target the role of social media and virtual communities for supporting seniors ageing in place, i...

  1. Recuperation of the energy released in the G-1, an air-cooled graphite reactor core; Recuperation de l'energie degagee dans G 1 pile a graphite refroidie a l'air

    Energy Technology Data Exchange (ETDEWEB)

    Chambadal, P [Electricite de France (EDF), 75 - Paris (France); Pascal, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    The CEA (in his five-year setting plan) has objective among others, the realization of the two first french reactors moderated with graphite. The construction of the G-1 reactor in Marcoule, first french plutonic core, is achieved so that it will diverge in the beginning of 1956 and reach its full power in the beginning of the second semester of the same year. In this report we will detail the specificities of the reactor and in particular its cooling and energy recuperation system. The G-1 reactor being essentially intended to allow the french technicians to study the behavior of an energy installation supply taking its heat in a nuclear source as early as possible. (M.B.) [French] Le Commissariat a l'Energie Atomique (dans le cadre du plan quinquennal) a entre autres objectifs, la realisation des deux premiers reacteurs francais moderes au graphite. La construction du reacteur G-1 a Marcoule, premiere pile plutonigene francaise, est realise afin qu'il puisse diverger au debut de 1956 et atteindre sa pleine puissance au debut du second semestre de la meme annee. Dans ce rapport nous detaillerons les specificites du reacteur et en particulier son systeme de refroidissement et de recuperation d'energie. Le reacteur G-1 etant essentielement destine a permettre aux techniciens francais d'etudier le plus tot possible le comportement d'une installation productrice d'energie empruntant sa chaleur a une source nucleaire. (M.B.)

  2. Kinerja Dan Efisiensi Bank Pemerintah (Bumn) Dan Busn Yang Go Publik Di Indonesia

    OpenAIRE

    Haryanto, Sugeng

    2012-01-01

    Penelitian ini menganalisis kinerja dan tingkat efisiensi bank-bank BUMN dan BUSN yang go Publik di Bursa Efek Indonesia. Sample penelitian ini mengambil tiga bank BUMN Bank BNI 46, Bank Mandiri dan Bank BRI) dan tiga bank BUSN (Bank BCA, Bank Niaga dan Bank Panin) dengan periode analisis tahun 2005-2011. Varibael yang digunakan meliputi ROA, ROE, LAR. LDR, NPL dan BOPO. Tujuan dari penelitian ini adalah melihat dan menganalisis perbedaan kinerja antara Bank BUMN dan BUSN yang go public di...

  3. Kondisi oral higiene dan karies gigi pada vegetarian dan non vegetarian di Maha Vihara Maitreya Medan

    OpenAIRE

    Prawira, Albert

    2011-01-01

    Perbedaan pola makan antara vegetarian dan non vegetarian dapat mempengaruhi kesehatan gigi dan mulut. Tujuan penelitian adalah untuk mengetahui kondisi oral higiene dan karies gigi pada umat vegetarian dan non vegetarian di Maha Vihara Maitreya Medan. Jenis penelitian adalah survei deskriptif. Sampel terdiri atas 74 vegetarian dan 65 non vegetarian. Pemeriksaan oral higiene dan karies gigi masing-masing menggunakan indeks OHIS Greene dan Vermillion dan indeks DMFT Klein, se...

  4. Experimental study of improvement of exchanged power in gases by catalytic dissociation: ammonia (1961); Etude experimentale de l'amelioration des echanges de chaleur avec les gaz par dissociation catalytique: ammoniac (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Perroud, P [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires; De La Harpe, A [Centre National de la Recherche Scientifique(CNRS), 75 - Paris (France)

    1961-07-01

    Rates of ammonia dissociation and resulting coefficients of improvement of exchanged power have been measured in an annular channel under following conditions: mean wall temperature until 1500 deg. C (tungsten rod, diameter 3 mm), mass velocity until 11 g/cm{sup 2}.s and absolute pressure between 1.5 and 7 kg/cm{sup 2}. Rate of dissociation is mainly function of wall temperature and total mass flow rate of ammonia; it depends little on entrance gas temperature and is practically independent of pressure. Apparent coefficients of improvement of exchanged power under above conditions (including radiation) have reached 1.8; this maximum was obtained for a mean wall temperature of 1250 deg. C. These coefficients decrease when Reynolds number increases. Finally, a theoretical analysis of the phenomenon is given as well as possibilities of application. (authors) [French] Les taux de dissociation d'ammoniac et les coefficients d'amelioration de puissance echangee resultants ont ete mesures en espace annulaire dans les conditions suivantes: temperature moyenne de paroi jusqu'a 1500 deg. C (barreau de tungstene de diametre 3 mm), vitesse massique jusqu'a 11 g/cm{sup 2}.s et pression absolue comprise entre 1,5 et 7 kg/cm{sup 2}. Le taux de dissociation est surtout fonction de la temperature de paroi et du debit en masse total d'ammoniac; il depend peu de la temperature d'entree du gaz et est pratiquement independant de la pression. Les coefficients d'amelioration apparents de la puissance echangee dans les conditions d'experience (rayonnement compris) ont atteint 1,8. Ce maximum observe se place vers une temperature moyenne de la paroi de 1250 deg. C. Ces coefficients decroissent quand le nombre de Reynolds de l'ecoulement croit. Finalement, une analyse theorique du phenomene est donnee ainsi que les perspectives d'applications. (auteurs)

  5. L'institutionnalisation des délibérations dans l'espace public au sein ...

    African Journals Online (AJOL)

    seriane.camara

    16 sept. 2010 ... prise de décision occuperont une place importante dans cette étude, l'accent sera surtout mis sur le processus par lequel la délibération dans l' ...... autorités traditionnelles mettent en œuvre pour essayer de faire face aux.

  6. Parks, People and Places

    DEFF Research Database (Denmark)

    Molin, Julie Frøik

    This thesis suggests, by applying a ‘place’ perspective, that involving users in operational management of green spaces holds potentials for enhancing ‘place attachment’ of urban inhabitants. As this can also build their commitment to decision making on their local living environment, green space...... maintenance becomes a potentially important setting for governance processes. Through a number of qualitative case studies, based on semi-structured interviews with municipal and community actors in Denmark and England, this dissertation explores the status and potentials of applying a place-based governance...... approach to green space maintenance. To guide the exploration a theoretical framework was developed inductively, structured around concepts of environmental governance in combination with strategic approaches to green space management. The framework is operationalised by analyses of the governance...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) Technical Training Monique Duval - Tel.74924 technical.training@cern.ch

  8. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 30.5.2006 (June-November course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue ACROBAT 7.0 : Utilisation de fichiers PDF 8 6.06.06 F Introduction à InDesign 16 7-8.06.06 F Python: Hands-on Introduction 24 7-9.06.06 E LabVIEW Base 2 16 22-23.06.06 F FileMaker - niveau 1 16 26-27.06.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-30.06.06 F Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E Introduction à Dreamweaver MX 16 ...

  9. Technical training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 13.6.2006 (June-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue LabVIEW Base 2 16 22-23.06.06 F FileMaker - niveau 1 16 26-27.06.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-30.06.06 F Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E Introduction à Dreamweaver MX 16 26-27.07.06 F ANSYS DesignModeler 16 29-30.08.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 20...

  10. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 9.5.2006 (May-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: find out the curren Hours Date Language LabVIEW Application Development 24 15-17.05.06 E LabVIEW Advanced Programming 16 18-19.05.06 E PERL 5: Advanced Aspects 8 18.05.06 E Technique du vide 16 18-19.05.06 F FileMaker - niveau 2 16 11-12.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 F Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE 16 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E Python: Hands-on Introduction 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06...

  11. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 27.6.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Manipulation des images 4 6.07.06 F Introduction to Databases and Database Design 16 11-12.07.06 E ACCESS 2003 - Level 1: ECDL 16 13-14.07.06 E-F Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E AutoCAD 2006 - niveau 1 32 14-21.09.06 F LabVIEW Basics 2 ...

  12. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 11.7.2006 (July-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue Design Patterns 16 25-26.07.06 E CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F CERN EDMS – Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 4-6.09.06 E ANSYS Workbench 32 12-15.09.06 F AutoCAD Mechanical 2006 16 12-13.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E LabVIEW: Working efficiently with LabWIEW 8 8 18.09.06 E PCAD Schémas ? Introduction 16 21-22.09.06 F PCAD PCB - Introduction  24 27-29.09.06 F C++ for Particle Physicists ...

  13. Technical Training: Places available

    CERN Multimedia

    2006-01-01

    Places available as of 21.3.2006 (March-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: find out the curren Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F Project Planning with MS-Project 16 9.05-6.06.06 E STEP7: niveau 1 32 9-12.05.06 E-F Oracle: Programming with PL/SQL 24 10-12.05.06 E FileMaker - niveau 2 16 11-12.05.06 F LabVIEW Application Development 24 15-17.05.06 E LabVIEW Advanced Programming 16 18-19.05.06 E PERL 5: Advanced Aspects 8 18.05.06 E Technique du vide 16 18-19.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 F Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE 16 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its T...

  14. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 19.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F LabVIEW Basics 1 24 11-13.09.06 E ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 15.09.06 E/F WORD 2003 (Short Course III) - HowTo... Work with long docu...

  15. Technical Training: Places available

    CERN Multimedia

    DAvide Vitè

    2006-01-01

    Places available as of 25.7.2006 (August-December course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Titre Heure Date Langue CERN EDMS for Local Administrators 16 1-2.08.06 E ANSYS DesignModeler 16 29-30.08.06 F EXCEL 2003 - niveau 1 : ECDL 16 30-31.08.06 F OUTLOOK 2003 (Short Course I) - E-mail 3 1.09.06 E/F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 1.09.06 E/F CERN EDMS - Introduction 8 5.09.06 E CERN EDMS MTF en pratique 4 6.09.06 F ANSYS Workbench 32 12-15.09.06 F CERN EDMS for Engineers 8 12.09.06 E Software Engineering in the Small and the Large 16 12-13.09.06 E LabVIEW Basics 2 16 14-15.09.06 E WORD 2003 (Short Course III) - HowTo... Work with long documents 3 15.09.06 E/F EXCEL 2003 (Short Course I) - HowTo... Wor...

  16. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 16-02-06 E-F WORD 2003 (Short Course III) - HowTo... Work with long documents 3 16-02-06 E-F CERN EDMS - Introduction 8 21.02.06 E OUTLOOK 2003 (Short Course III) - Meetings and Delegation 3 27-02-06 E-F WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27-02-06 E-F JAVA: Level 2 32 28-02-06 to 03-03-06 E Manipulation des images 4 28.02.06 F ACCESS 2003 - Level 2: ECDL AM5 16 02 to 03-03-06 E-F FrontPage 2003 - niveau 2 16 02 to 03-03-06 F C++ for Particle Physicists 20 06 to 10-03-06 E FileMaker - niv...

  17. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 21.3.2006 (March-October course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language FrontPage 2003 - niveau 1 16 27-28.03.06 F Oracle Forms Developer 10g: Move to the Web 16 27-28.03.06 E ACCESS 2003 - Level 2: ECDL AM5 16 3-4.03.06 E-F JAVA 2 Enterprise Edition - Part 1: Web Applications 16 3-4.04.06 E JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans 24 5-7.04.06 E AutoCAD Mechanical 2006 16 11-12.04.06 F FrontPage 2003 - niveau 2 16 24-25.04.06 F C++ Programming Part 1 - Introduction to Object-Oriented Design and Programming 24 25-27.04.06 E AutoCAD 2006 - niveau 1 32 27.04-4.05.06 F Oracle: SQL 24 3-5.05.06 E EXCEL 2003 (Short Course I) - HowTo... Work with formulae 3 4.05.06 (am) E-F EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing 3 4...

  18. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course II) - HowTo... Mail merge 3 13.03.06 E-F EXCEL 2003 (Short Course III) - HowTo... Pivot tables 3 20.03.06 E-F EXCEL 2003 (Short Course IV) - HowTo....Link cells, worksheets and workbooks 3 20.03.06 E-F Object-Oriented Analysis and Design using UML 24 21-23.03.06 E EXCEL 2003 - niveau 1 16 22-23.03.06 F FrontPage 2003 - niveau 1 16 27-28.03.06 F Oracle Forms Developer 10g: Move to the Web 16 27-28.03.06 E Oracle JDeveloper 10g: Build Applications with ADF 24 29-31.03.06 E ACCESS 2003 - Level 2: ECDL AM5 16 3-4.03.06 E-F JAVA 2 Enterprise Edition - Part 1: Web Applications 16 3-4.04.06 E JCOP: Control System Integration using JCOP Tools 24 4-6.04.06 E JAVA 2 Enterprise Edition...

  19. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 7.2.2006 (February-May course sessions) The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27.02.06 E-F JAVA: Level 2 32 28.02-3.03.06 E Manipulation des images 4 28.02.06 F ACCESS 2003 - Level 2: ECDL AM5 16 2-3.03.06 E-F C++ for Particle Physicists 20 6-10.03.06 E PowerPoint 2003 8 9.03.06 F JCOP: Control System Integration using JCOP Tools 24 14-16.03.06 E EXCEL 2003 (Short Course III) - HowTo... Pivot tables 3 20.03.06 E-F EXCEL 2003 (Short Course IV) - HowTo....Link cells, worksheets and workbooks 3 20.03.06 E-F JCOP: Finite State Machines in the JCOP Framework 24 21-23.03.06 E Object-Oriented Analysis and Design using UML 24 21-23.03.06 E FrontPage 2003 - niveau 1 16 27-28.03.06 F JCOP: Joint PVSS-JCOP Fram...

  20. IDE DAN DESAIN

    Directory of Open Access Journals (Sweden)

    Priscilia Yunita Wijaya

    1999-01-01

    Full Text Available We have seen many desain all around our everyday living. Design exist in the form of brochures%2C posters%2C banners%2C signages%2C book covers%2C and etcetera. Some are nice and easy to understand%2C some are ok%2C and some look like they are not fully develop and thought. A word that run across our mind whrn we enjoying a design is idea . A good design almost always associated with a good idea%2C is it tru? This paper is going to discuss about desain and its relationship to idea. Abstract in Bahasa Indonesia : Banyak desain yang diamati dalam kehidupan kita sehari-hari. Desain hadir dalam bentuk brosur%2C poster%2C spanduk%2C tanda-tanda%2C sampul buku%2C dan lain sebagainya. Ada beberapa yang bagus dan mudah untuk dimengerti%2C beberapa yang biasa%2C dan beberapa yang tampak asal dibuat. Sebuah kata yang terlintas dalam pemikiran kita dalam menikmati sebuah desain adalah ide . Sebuah desain yang baik selalu di identikan dengan ide yang baik%2C benarkah hal ini? Apakah desain dan apa hubungannya dengan ide akan dibahas pada tulisan ini.

  1. INTERMODALITE ET DEVELOPPEMENT URBAIN DANS L ...

    African Journals Online (AJOL)

    Administrateur

    Face à l'échec rejeté de toutes les politiques adoptées dans le processus du développement urbain de la ville d'Alger depuis la période coloniale et jusqu'à nos jours, force est de constater que les différents instruments d'urbanisme mis en place n'arrivent pas à venir à bout de toutes les contraintes de son site qui est très ...

  2. Emerging place image

    DEFF Research Database (Denmark)

    Ooi, Can-Seng; Peji´c Kristensen, Tatjana; Lomanová Pedersen, Zdenka

    2004-01-01

    and perceptions.This paper introduces the concept of the orientalist tourist gaze, and demonstrates howorientalism may manifest in tourism. Data on how these two countries are imagined werecollected in Denmark.Keywords: destination identity, host society-guest interaction, impact of tourism, orientalism......Tourism offers an arena through which a place identity is imagined, negotiated and contained.This paper compares the Czech Republic and Slovakia, and show how these countriesconstruct and assert their identities through tourism. They both share a common history asCzechoslovakia, however...

  3. Tourism Sociabilities and Place

    DEFF Research Database (Denmark)

    Bødker, Mads; Browning, David

    2013-01-01

    Proposing new design opportunities, this paper challenges received notions of tourism, arguing that tourism is fundamentally social and concerned with making place. This turn makes tourism not only a convenient testing ground for technology concepts, but increasingly also for more sensitive...... renderings of, and interventions in, tourism as a relational and social practice. Using examples from commercial, arts, and design projects, and providing excerpts from our own fieldwork and design workshops with tourists and locals, this paper outlines three challenges through a conceptual lens that we see...... as productive for appropriate interaction design of tourism technologies....

  4. Signs in Place

    DEFF Research Database (Denmark)

    Hamid, Salmiah Binti Abdul; Jensen, Ole B.; Silva, Victor

    Travelling in unfamiliar areas is usually very interesting, however it can also be stressful. People travel or move around in an urban space according to their needs, and the environment can also influence the way people move about from one place to another. If a person gets lost, a map or GPS can...... and geosemiotic studies with regards to the road traffic signs used in urban spaces. The paper ends with a discussion on how people choreograph their movement in their everyday life from two different perspectives: above vs. below....

  5. Signs In Place

    DEFF Research Database (Denmark)

    Hamid, Salmiah Binti Abdul; Jensen, Ole B.; Silva, Victor

    2012-01-01

    Travelling in unfamiliar areas is usually very interesting; however, it can also be stressful. People travel or move around in an urban space according to their needs, and the environment can influence the way people move about from one place to another. If a person gets lost, a map or GPS can...... and geosemiotic studies with regards to the road traffic signs used in urban spaces. The paper ends with a discussion on how people choreograph their movement in their everyday life from two different perspectives: above vs. below...

  6. URGENSI DAN PROSPEK PENGATURAN (IUS CONSTITUENDUM UU TENTANG CONTEMPT OF COURT UNTUK MENEGAKKAN MARTABAT DAN WIBAWA PERADILAN

    Directory of Open Access Journals (Sweden)

    Lilik Mulyadi

    2015-07-01

    Full Text Available UU Contempt of Court merupakan kebutuhan yang bersifat urgent, segera dan mendesak, sehingga perlu dilakukan kajian dan penelitian secara kritis, akademis dan bersifat komprehensif untuk menjaga keluhuran dan menegakkan martabat dan wibawa peradilan.

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

  8. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

  9. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

  10. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

  11. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EMAG-2004 - Electromagnetic Design and Mathematical Optimization in Magnet Technology: 4- 14.4.2005 (8 x 3h) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermediate 1: 11 - 13.4.2005 (3 days) ACCESS 2003 - Level 2 - ECDL AM5: 13 & 14.4.2005 (2 days) LabVIEW Intermediate 2: 14 & 15.4.2005 (2 days) PowerPoint 2003 (F) : 18.4.2005 (1 jour) Joint PVSS JCOP Framework : 25 - 29.4.2005 (5 days) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2002 - niveau 1 : 11, 12, 18 & 19.5.2005 (4 jour...

  12. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Outlook (short course I) : E-mail : 31.8.2004 (2 hours, morning) Introduction à Outlook : Outlook (short course II) : Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur ...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.2004 (morning) Outlook (Short Course III): Meetings and Delegation: 7.9.2004 (2 hours, afternoon) I...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Introduction à Outlook : 19.8.2004 (1 jour) Outlook (Short Course I): E-mail: 31.8.2004 (2 hours, morning) Outlook (Short Course II): Calendar, Tasks and Notes: 31.8.2004 (2 hours, afternoon) Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Instructor-led WBTechT Study or Follow-up for Microsoft Applications: 7.9.20...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Introduction à ANSYS : 23 - 26.11.2004 (4 jours) FileMaker - niveau 1 : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travaill...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) Advanced aspects of PERL 5: 10.12.2004 (1 day) PCAD PCB – Débutants : 13 - 15.12.2004 (3 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilit&eac...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FileMaker - niveau 1 : 23 - 26.11.2004 (4 jours) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (3 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) Advanced aspects of PERL 5: 10.12.2004 (1 day) PCAD PCB – Débutants : 13 - 15.12.2004 (3 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) Introduction to the CERN EDMS : 18.1.2005 (1 day - free course) The CERN EDMS for Local Administrators : 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 ...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Explicit Dynamics with ANSYS/LS-Dyna : 7 - 9.12.2004 (2 days) PCAD Schémas - Débutants : 9 & 10.12.2004 (2 jours) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilité électromagnétique (CEM) : installation et remèdes : 25 - 27.1.2005 (3 jours) Finite State Machines in the JCOP Fr ...

  19. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW...

  20. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 - 8.7.2004 (3 jours) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING...

  1. Technical Training: Places available

    CERN Document Server

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Programming : 9 - 13.8.2004 (5 days) Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Programming : 13 - 17.9.2004 (5 days) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14-17.9.2004 (4...

  2. Technical Training: Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming: 1 - 3.9.2004 (3 days - free course) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) FrontPage 2003 - niveau 1 : 20 & 21.9.2004 (2 jours) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) Introduction à Wind...

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Introduction to the CERN EDMS : 22.6.2004 (1 day) The CERN EDMS for local administrators : 23 & 24.6.2004 (2 days) Compatibilité électromagnétique (CEM) - Introduction / Electromagnetic Compatibility (EMC) - Introduction: 7.7.2004 (morning) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP...

  5. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) CLEAN-2002 - Travailler en salle propre : 23.11.2004 (après-midi, cours gratuit) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) ENSEIGNEMENT ...

  6. Technical training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) Introduction to PERL 5 : 8 & 9.12.2004 (2 days) Advanced aspects of PERL 5 : 10.12.2004 (1 day) The JAVA Programming Language Level 1 : 11 & 12.1.2005 (2 days) Introduction...

  7. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11....

  9. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Introduction à Dreamweaver MX :  3 - 4.10.2005 (2 jours) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with Auto...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magn&...

  11. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 - 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) WORD 2003 (Short Course IV) - HowTo... Work with master document: 28.9.2005 (morning) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2...

  12. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framew...

  13. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language AutoCAD Mechanical 2006 16 30 to 31-01-06 F DIAdem : base 24 01 to 03-02-06 F ACROBAT 7.0 : Utilisation de fichiers PDF 8 06-02-06 F Manipulation des images 4 08-02-06 F OUTLOOK 2003 (Short Course I) - E-mail 3 09-02-06 E-F WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F JCOP: Control System Integration using JCOP Tools 24 14 to 16-02-06 E OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Notes 3 16-02-06 E-F WORD 2003 (Short Course III) - HowTo... Work with long documents 3 16-02-06 E-F FrontPage 2003 - niveau 1 16 23 to 24-02-06 F OUTLOOK 2003 (Short Course III) - Meetings and Delegation 3 27-02-06 E-F WORD 2003 (Short Course IV) - HowTo... Work with master document 3 27-02-06 E-F ...

  14. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACCESS 2003 - Level 2: ECDL AM5 16 19 to 20-01-06 E-F AutoCAD 2006 - niveau 1 32 19 to 25-01-06 F C++ Programming Advanced - Traps and Pitfalls 32 24 to 27-01-06 E STEP7 : Level 1 32 24 to 27-01-06 E LabVIEW Basics 2 16 26 to 27-01-06 E AutoCAD Mechanical 2006 16 30 to 31-01-06 F DIAdem : base 24 01 to 03-02-06 F FrontPage 2003 - niveau 1 16 02 to 03-02-06 F ACROBAT 7.0 : Utilisation de fichiers PDF 8 06-02-06 F Manipulation des images 4 08-02-06 F OUTLOOK 2003 (Short Course I) - E-mail 3 09-02-06 E-F WORD 2003 (Short Course II) - HowTo... Mail merge 3 09-02-06 E-F ACCESS 2003 - Level 1: ECDL M5 16 13 to 14-02-06 E-F JCOP: Control System Integration using JCOP Tools 24 14 to 16-02-06 E OUTLOOK 2003 (Short Course II) - Calendar, Tasks and Note...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: WORD 2003 (Short Course I) - HowTo... Work with AutoTasks (AutoText, AutoFormat, AutoCorrect, Lists, Find/Replace): 25.8.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 25.8.2005 (afternoon) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 26.8.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 26.8.2005 (afternoon) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW base 1 : 5 - 7.9.2005 (3 jours) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechniq...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCESS 2003 - Level 2 - ECDL AM5: 5 - 8.7.2005 (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 8.7.2005 (aftern...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 6.7.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 7.7.2005 (morning) OUTLOOK (Short Course III) - Meetings and Delegation: 8.7.2005 (morning) EXCEL 2003 (Short Course I) - HowTo... Work with formulae: 7.7.2005 (afternoon) EXCEL 2003 (Short Course II) - HowTo... Format y...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  19. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

  20. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) LabVIEW Application Development (Intermediate I): 5 - 7.12.2005 (3 days) LabVIEW Advanced Programming (Intermediate 2): 8 - 9.12.2005 (2 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  1. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1: 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 1.2.2005 (2 j size="2">LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: ...

  2. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) Utilisation des fichiers PDF avec Acrobat 7.0 :   4.10.2005 (1 journée) LaTeX par la pratique :   4 - 6.10.2005 (3 matinées) PowerPoint 2003 (F) :  7.10.2005 (1 journée) FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCO...

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) Word 2003 - niveau 1 : 22 & 23.11.2004 (2 jours) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) CLEAN-2002 - Travailler en salle propre : 23.11.2004 (après-midi, cours gratuit) Project Planning with MS-Project : 25.11 & 2.12.2004 (2 days) PCAD Sch&eac...

  4. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) WORD 2003 (Short Course I) - HowTo... Work with AutoTasks: 26.10.2005 (afternoon) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Joint PVSS JCOP Framework : 21 - 25.11.2005 (5 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11....

  5. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FileMaker - niveau 1 :  20 - 21.10.2005 (2 jours) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Joint PVSS JCOP Framework : 21 - 25.11.2005 (5 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : ...

  6. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1:  5 â€" 7.9.2005 (3 days) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) Finite State Machines in the JCOP Framework:  26 - 28.9.2005 (3 days) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) Joint PVSS JCOP Framework : 3 - 7.10.2005 (5 days) ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) OU...

  7. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1: 11 & 12.1.2005 (2 days) Introduction to XML : 13 & 14.1.2005 (2 days) ELEC-2005.:Winter term: Introduction to electronics in HEP: 18, 20, 25, 27.1, 1 & 3.2.2005 (6 x 2h lectures) The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (8 demi-journées) CLEAN-2002 : Travailler en salle propre : 25.1.2005 (après-midi, cours gratuit) Compatibilité électromagnétique (CEM) : installation et remèdes : 25 - 27.1.2005 (3 jours) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9...

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The CERN EDMS for Local Administrators: 19 & 20.1.2005 (2 days - free course) Programmation Unity-Pro pour utilisateurs de Schneider PL7-Pro : 24 - 28.1.2005 (9 demi-journées) LabVIEW base 1/basics 1 : 31.1 - 2.2.2005 (3 jours/3 days - langue à décider/language to be decided) LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 â...

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 1/basics 1 : 31.1 - 2.2.2005 (3 jours/3 days - langue à décider/language to be decided) LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) C++ Programming Advanced -Traps and Pitfalls: 8 - 11.2.2005 (4 days) Joint PVSS JCOP Framework: 14 - 18.2.2005 (5 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Joint PVSS JCOP Framework : 9 - 13.8.2004 (5 days) Outlook (I): E-mail : 31.8.2004 (2 hours, morning) Outlook (II): Calendar, Tasks and Notes : 31.8.2004 (2 hours, afternoon) Hands-on Introduction to Python Programming : 1 - 3.9.2004 (3 days - free course) Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 (morning) Outlook (III): Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Framework : 13 - 17.9.2004 (5 days) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.9.2004 (4 jours) Programmation STEP7 niveau 1 : 14 - 17.9.2004 (4 jours) FrontPage 2003 - niveau 1 : 20 & 21.9.2004 (2 jours) ANSYS: Thermal Analysis : 22 - 24.9.2004 (3 days) ANSYS: Advanced Topics : 27.9...

  11. Technical Training: Places available

    CERN Document Server

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT Study or Follow-up for Microsoft Applications : 7.9.2004 7.9.2004 Outlook (short course III) : Meetings and Delegation : 7.9.2004 (2 hours, afternoon) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 7 & 8.9.2004 (2 jours) Joint PVSS JCOP Framework : 13 - 17.9.2004 (5 days) Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) ...

  12. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Programmation STEP7 niveau 1 : 14-17.9.2004 (4 jours) ANSYS : Thermal Analysis : 22 - 24.9.2004 (3 days) LabVIEW Migration 6 à 7 : 23.9.2004 (one day) ANSYS : Advanced Topics : 27.9 - 1.10.2004 (5 days) Word 2003 - niveau 2 : 27 & 28.9.2004 (2 jours) LabVIEW - Basics 1 : 27 - 29.9.2004 (3 days) MAGNE-04 : Magnétisme pour l'électrotechnique : 28 - 30.9.2004 (3 jours) LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Introduction à ANSYS : 23 - 26.11.2004 (4 jours) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924...

  13. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i : New features for developers : 14 - 16.6.2004 (3 days) The Joint PVSS JCOP Framework: 14 - 18.6.2004 (5 days) Introduction au VHDL et utilisation du simulateur NCVHDL de CADENCE : 15 & 16.6.2004 (2 jours) EXCEL 2003 - niveau 2 : 17 & 18.6.2004 (2 jours) MAGNE-04 : Magnétisme pour l'électrotechnique : 6 au 8.7.2004 (3 jours) AutoCAD 2002 - niveau 1 : 13, 14, 23, 24.09.2004 (4 jours) ENSEIGNEMEN...

  15. Technical Training: Places Available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AXEL-2005; Introduction to Particle Accelerators : 14- 18.3.2005 (10 x 1 h lectures) ACCESS 2003 - Level 1: ECDL M5: 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermediate 1: 11 - 13.4.2005...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) Hands-on Object-Oriented Design and Programming with C++ : 1 - 3.3.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) ACCESS 2003 - Level 1 : 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) FileMaker - ...

  19. THE PLACES FOR PARTICIPATION

    Directory of Open Access Journals (Sweden)

    Tania Carson

    2007-09-01

    Full Text Available The current upsurge of interest in street art with its direct approach to the city emphasizes the need to readdress public arts’ role within the wider social and cultural context. As it becomes routine to incorporate art works into city planning and city life, art has become both ‘safe’ and ‘user‐friendly’. On the one hand, art is subsumed and immersed into the wider culture through leisure and entertainment policies, socially engaged public art projects, community art and urban design. On the other hand, there are those works which deliberately intend to unsettle or confront the viewer. In recent years the term intervention has been ascribed to unorthodox art works in the public sphere which are often illicit, or at least non‐complicit in the prevailing hegemony. These practices are disruptive due to their enactment outside traditional art spaces, often in the streets. By occupying the streets, places of democracy and disjunction, these interventions transform public space back into a place of overt cultural and political expression. They also deliberately involve the inhabitants of the city by utilizing everyday spaces in ways which offer an unmediated sense of the artwork.

  20. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 12, 13, 18, 19.5.2005 (4 jours) ACCESS 2003 - Level 1: ECDL M5 : 11 & 12.5.2005 (2 days) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Intr...

  1. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11, 12, 18, 19.5.2005 (4 jours) Object-Oriented Analysis and Design using UML: 17 - 19.5.2005 (3 days) Synplify Pro Training: 18.5.2005 (1 day) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) Introduction à la CAO CADENCE : 31.5 - 1.6.2005 (2 jours) LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introductio...

  2. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) LabVIEW Basics I:  23 - 25.1.2006 (3 days) C++ Programming Advanced - Traps and Pitfalls: 24 - 27.1.2006 (4 days) LabVIEW Basics II:  26 - 27.1.2006 (2 days) Joint PVSS-JCOP Framework: 30.1 - 3.2.2006 (5 days, free of charge) Finite State Machines in the JCOP Framework : ...

  3. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) Finite State Machines in the JCOP Framework: 13 - 15.12.2005 (3 days) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) PCAD PCB - Introduction : 14 - 16.12.2005 (3 jours) AutoCAD 2006 - niveau 1 : 19, 20, 24 & 25.1.2006 (4 jours) LabVIEW Basics I:  23 - 25.1.2006 (3 days) C++ Programming Advanced - Traps and Pitfalls: 24 - 27.1.2006 (4 days) STEP7 Programming Level 1: 24 - 27.1.2006 (4 days) LabVIEW Basics II:  26 - 27.1.2006 (2 days) AutoCAD Mechanical 2006 : 30 - 31.1.2006 (2 jours; suite du cours AutoCAD 2006 - niveau 1) Joint PVS...

  4. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ACCESS 2003 - Level 1 - ECDL M5: 24 - 25.10.2005 (2 days) Finite State Machines in the JCOP Framework : 25 - 27.10.2005 (3 days) EXCEL 2003 (Short Course III) - HowTo... Pivot tables: 26.10.2005 (morning) Introduction to the CERN EDMS: 2.11.2005 (1 day, free of charge) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) The CERN EDMS for Engineers: 8.11.2005 (1 day, free of charge) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: ...

  5. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents: 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) Introduction à ANSYS Classique : 6 - 9.12.2005 (4 jours) EXCEL 2003 (Short Course II) - HowTo... Format your worksheet for printing: 7.12.2005 (morning) AutoCAD - mise à jour d’AutoCAD 2002 à AutoCAD 2006 : 8.12.2005 (1 journée - pour les utilisateurs d’AutoCAD 2002) PCAD Schémas - Introduction : 8 - 9.12.2005 (2 jours) Finite State Machines in the JCOP Framework: 13 - 15.12.2005 (3 days) PCAD PCB - Introduction : 14 - 16.12.2005 (3 jours) ACCESS 2003 - Level 2 - ECDL AM5: 14 - 15.12.2005 (2 days) AutoCAD 2006 - niveau 1 : 19, 20, 24 & 25.1.2006 (4 jours) LabVIEW Basics I:  23 - 25.1.2006...

  6. TECHNICAL TRAINING: PLACES AVAILABLE

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW Basics 1 : 22 - 24.3.2004 (3 days) Oracle 9i : New Features for Developers : 22 - 24.3.2004 (3 days) Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW hands-on (E) : 20.4.2004 (afternoon, free of charge) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Word XP - niveau 1 : 10 & 11.5.2004 (2 jours) Word XP - niveau 2 : 24 & 25.5.2004 (2 jours) If you wish to participate in one of these courses, pleas...

  7. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 1.4.2004 (morning) FrontPage XP - niveau 1 : 5 & 6.4.2004 (2 jours) AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 day...

  8. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) Utilisation des fichiers PDF avec ACROBAT 6.0 : 1.3.2005 (1 journée) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 X 2.30-hours lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 X 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW intermediate 1: 11 - 13....

  9. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW base 2/basics 2 : 3 & 4.2.2005 (2 jours/2 days - langue à décider/language to be decided) Finite State Machines in the JCOP Framework: 1 - 3.2.2005 (3 days - free course) The JAVA Programming Language Level 2: 7 - 9.2.2005 (3 days) JAVA 2 Enterprise Edition - Part 1: WEB Applications: 21 & 22.2.2005 (2 days) FrontPage 2003 - niveau 1 : 21 & 22.2.2005 (2 jours) JAVA 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 23 - 25.2.2005 (3 days) ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 X 2.30-hours lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 X 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 20...

  10. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 - Spring Term: Integrated circuits and VLSI technology for physics: 1 - 17.3.2005 (6 x 2.5-hour lectures) C++ for Particle Physicists: 7 - 11.3.2005 (6 x 3-hour lectures) Joint PVSS JCOP Framework : 14 - 18.3.2005 (5 days) Oracle 9i: SQL: 14 -16.3.2005 (3 days) AXEL-2005; Introduction to Particle Accelerators : 14- 18.3.2005 (10 x 1 h lectures) ACCESS 2003 - Level 1: ECDL M5: 15 - 16.3.2005 (2 days) AutoCAD 2002 - niveau 1 : 15, 16, 21& 22.3.2005 (4 jours) FrontPage 2003 - niveau 2 : 21 & 22.3.2005 (2 jours) Hands-on Object-Oriented Design and Programming with C++ : 22 - 24.3.2005 (3 days) FileMaker - niveau 2 : 4 & 5.4.2005 (2 jours) Oracle 9i: Programming with PL/SQL: 4 - 6.4.2005 (3 days) EXCEL 2003 - niveau 2 : 11 & 12.4.2005 (2 jours) LabVIEW Intermedia...

  11. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 - 30.4.2004 (5 days) Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Pla...

  12. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

  13. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

  14. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The CERN EDMS for Engineers : 6.10.2004 (1 day) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions...

  15. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW - Basics 2 : 30.9 & 1.10.2004 (2 days) Introduction à Windows XP au CERN : 4.10.2004 (matin) The EDMS MTF in practice : 4.10.2004 (afternoon) The CERN EDMS for Engineers : 6.10.2004 (1 day) FrontPage 2003 - niveau 1 : 7 & 8.10.04 (2 jours) Hands-On Object Oriented Design and Programming with C++ : 9 - 12.11.2004 (3 days) FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Outlook (Short Course III) : Meetings and Delegation : 9.11...

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: FileMaker - niveau 1 : 18 & 19.10.2004 (2 jours) Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) FrontPage 2003 - niveau 2 : 18 &a...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Outlook (short course I) : E-mail : 22.10.2004 (2 hours, morning) Outlook (short course II) : Calendar, Tasks and Notes: 22.10.2004 (2 hours, afternoon) Excel 2003 - niveau 1 : 4 & 5.11.2004 (2 jours) LabVIEW Intermediate I : 8 - 10.11.2004 (3 days) Instructor-led WTechT Study or Follow-up for Microsoft Applications : 9.11.2004 (morning) Hands-On Object Oriented Design and Programming with C++ : 9 - 11.11.2004 (3 days) Outlook (Short Course III) : Meetings and Delegation : 9.11.2004 (2 hours, afternoon) LabVIEW Intermediate II : 11 & 12.11.2004 (2 days) AutoCAD 2002 - niveau 1 : 11, 12, 18, 19.11.2004 (4 jours) C++ for Particle Physicists : 15 - 19.11.2004 (6 X 3 hours sessions) FrontPage 2003 - niveau 2 : 18 & 19.11.2004 (2 jours) Word 2003 - niveau 1 : 22 &a...

  18. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

  19. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

  20. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) FrontPage 2003 - niveau 2 : 5 - 6.12.2005 (2 jours) LabVIEW Application Development (Intermediate 1): 5 - 7.12.2005 (3 d...

  1. Technical Training: Places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) ELEC-2005 Autumn Term - Electronics applications in HEP experiments: 8.11 - 8.12.2005 (10 x 2h lectures) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The CERN EDMS for Engineers: 17.11.2005 (1 day, free of charge) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Programming: 28 - 30.11.2005 (3 days) OUTLOOK (Short Course III) - Meetings and Delegation: 30.11.2005 (morning) WORD 2003 (Short Course III) - HowTo... Work with long documents : 30.11.2005 (afternoon) Fron...

  2. Technical training: places available

    CERN Multimedia

    Davide Vitè

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Introduction to the CERN EDMS: 2.11.2005 (1 day, free of charge) OUTLOOK (Short Course I) - E-mail: 2.11.2005 (morning) WORD 2003 (Short Course II) - HowTo... Mail merge: 2.11.2005 (afternoon) FrontPage 2003 - niveau 1 :  3 - 4.11.2005 (2 jours) AutoCAD 2006 - niveau 1 : 3, 4, 9, 10.11.2005 (4 jours) Joint PVSS JCOP Framework : 7 - 11.11.2005 (5 days) The CERN EDMS for Engineers: 8.11.2005 (1 day, free of charge) The EDMS-MTF in practice: 9.11.2005 (morning, free of charge) The CERN EDMS for Local Administrators: 15-16.11.2005 (2 days, free of charge) OUTLOOK (Short Course II) - Calendar, Tasks and Notes: 16.11.2005 (morning) Hands-On Object Oriented Design and Programming with C++ : 16 - 18.11.2005 (3 days) The Java Programming Language Level 1: 21 - 23.11.2005 (3 days) Hands-on Introduction to Python Prog...

  3. Annex 1: Simulation of the Serso underground heat storage - Calibration using data from two-years measurements; Annexe 1: simulation du stockage de chaleur dans le terrain de l'installation Serso et calibrage sur deux ans de mesure

    Energy Technology Data Exchange (ETDEWEB)

    Pahud, D.

    2006-12-15

    This is the Annex 1 of the annual report 2006 of the Serso project. The basic idea of the Serso project is to defrost a road bridge in winter with heat produced by the bridge in summer by solar radiation absorption and stored in a diffusive underground store. Pipes are imbedded in the bridge surface material and connected to a set of underground borehole heat exchangers ('geothermal probes'). A heat transfer fluid is circulated by a pump. The store is loaded in summer and discharged in winter. In the present Annex the computer code developed to simulate the underground heat store is validated and tuned on the basis of a two-years series of field measurements. The agreement between predicted and measured values is good. A limitation of the computer model is that it cannot simulate only a part of the borehole heat exchangers, a feature that were implemented in the pilot store, to enable discharging the peripheral heat exchangers and leave the central ones untouched. The authors investigated the relevance of such a feature and found out that it does not significantly improve the store efficiency. As it is an additional hardware complication they recommend to ignore such a feature in future projects.

  4. Mass-charge-heat coupled transfers in a single cell of a proton exchange membrane fuel cell; Transferts couples masse-charge-chaleur dans une cellule de pile a combustible a membrane polymere

    Energy Technology Data Exchange (ETDEWEB)

    Ramousse, J

    2005-11-15

    Understanding and modelling of coupled mass, charges and heat transfers phenomena are fundamental to analyze the electrical behaviour of the system. The aim of the present model is to describe electrical performances of a PEFMC according to the fluidic and thermal operating conditions. The water content of the membrane and the water distribution in the single cell are estimated according to the coupled simulations of mass transport in the thickness of the single cell and in the feeding channels of the bipolar plates. A microscopic model of a Gas Diffusion Electrode is built up to describe charges transfer phenomena occurring at the electrodes. Completed by a study of heat transfer in the Membrane Electrode Assembly, conditions and preferential sites of water vapor condensation can be highlighted. A set of measurements of the effective thermal conductivity of carbon felts used in fuel cells as porous backing layers have also been performed. Although the value of this parameter is essential for the study of heat transfer, it is still under investigation because of the strong thermal anisotropy of the medium. (author)

  5. Study of heat transfer in superconducting cable electrical insulation of accelerator magnet cooled by superfluid helium; Etude des transferts de chaleur dans les isolations electriques de cables supraconducteurs d'aimant d'accelerateur refroidi par helium superfluide

    Energy Technology Data Exchange (ETDEWEB)

    Baudouy, B

    1996-10-04

    Heat transfer studies of electrical cable insulation in superconducting winding are of major importance for stability studies in superconducting magnets. This work presents an experimental heat transfer study in superconducting cables of Large Hadron Collider dipoles cooled by superfluid helium and submitted to volume heat dissipation due to beam losses. For NbTi magnets cooled by superfluid helium the most severe heat barrier comes from the electrical insulation of the cables. Heat behaviour of a winding is approached through an experimental model in which insulation characteristics can be modified. Different tests on insulation patterns show that heat transfer is influenced by superfluid helium contained in insulation even for small volume of helium (2 % of cable volume). Electrical insulation can be considered as a composite material made of a solid matrix with a helium channels network which cannot be modelled easily. This network is characterised by another experimental apparatus which allows to study transverse and steady-state heat transfer through an elementary insulation pattern. Measurements in Landau regime ({delta}T{approx}10{sup -5} to 10{sup -3} K) and in Gorter-Mellink regime ({delta}T>10{sup -3} K) and using assumptions that helium thermal paths and conduction in the insulation are decoupled allow to determine an equivalent channel area (10{sup -6} m{sup 2}) and an equivalent channel diameter (25 {mu}). (author)

  6. Heat and mass transfer in multi-scale porous structures: application to Diesel particulate filters modelling; Transferts de chaleur et de masse dans des structures poreuses multi-echelles: application a l'etude des filtres a particules Diesel

    Energy Technology Data Exchange (ETDEWEB)

    Oxarango, L.

    2004-09-15

    Ceramic filters appear to be the most promising solution to deal with the future emission standard requirements for diesel powered vehicles. Indeed, this type of Diesel Particulate Filters provides suitable characteristics for high efficiency soot collection. However, this filtration process is characterised by a dramatic increase of the pressure drop imposed in the exhaust line. Thus, the filter has to be cleaned periodically to insure the proper engine operating conditions. This regeneration phase is based on the oxidation of the carbon particles within the apparatus. This complex thermal process is critical for the safety working of Diesel Particulate Filters. Indeed, thermal stresses induced by the heat released during soot oxidation are involved in most of the filter breaking scenario. Numerous geometrical parameters defining the complex multi-scale structure of the apparatus could influence its thermal response. Thus, the geometrical optimization of these filters is a major problematic for the development of new products. This study aims at modelling heat and mass transfer phenomenon within Diesel Particulate Filters. The studied geometrical configuration is based on a ceramic honeycomb with porous walls and alternately plugged channel known as wall-flow DPF. In a first part, the gas flow, particles transport and collection are considered. Given the apparatus particular structure, the problem has to be treated considering various spatial length-scales. The filtering walls are characterised by a micrometric porous structure. The flow modelling with the Darcy law requires determining a particular effective permeability. The laminar flow problem in millimetric channels with wall suction (or injection) is studied. The asymptotic solution for flow in two-dimensional channels is used to derive a one-dimensional system preserving mass and momentum balances. This approach is then extended to the square channel configuration using direct numerical simulations. The particle collection process is modelled as a simple cake layer formation with respect to the gas flow properties. A parametric study carried out on periodic representative cells evidence the heterogeneous distribution of soot along the filter channel. Then, the non-periodic multi-channel case is considered. The particle loading appears to be weakly sensitive to local heterogeneities imposed in a single channel. Finally, the mass and momentum equations are expressed under a macroscopic form. The filtration process could then be simulated in the whole apparatus. During this study, a particular care has been taken to validate each model against experiment. In a second part, the thermal problem is considered. The phenomena occurring at the micrometric scale are taken into account. However, the study focuses more particularly on the scale change allowing describing the honeycomb as an equivalent homogeneous media. The analysis is base on the volume averaging theory. A thermal-equilibrium assumption is considered to express a macroscopic one-equation model including all the thermal exchanges. The local contributions to the macroscopic balance equation are taken into account defining closure problems. These closure problems are computed numerically on a periodic representative cell of the filter to obtain an effective thermal conductivity tensor. The particles oxidation reaction is taken into account as a source term in the macroscopic equation. It includes a global reaction kinetic model. The oxygen transport through the soot layer appears to play a limiting role for the chemical reaction. The complete macroscopic energy balance model is solved numerically with a finite volume method. The measurements obtained from two different experimental apparatus are used to validate the approach. Finally, the influence of some geometrical parameters on the thermal behaviour during regeneration is discussed. (author)

  7. Analysis of oil migration in one and two-stage heat pumps; Analyse de la migration d'huile dans les pompes a chaleur mono- et bi-etagees

    Energy Technology Data Exchange (ETDEWEB)

    Zehnder, M.; Favrat, D.

    2003-07-01

    This final report for the Swiss Federal Office of Energy SFOE describes work done at the Swiss Federal Institute of Technology in Lausanne, Switzerland, as part of the Swiss Retrofit Heat Pump project that examines ways of replacing traditional oil-fired domestic heating systems with heat pumps. The apparatus used to investigate the migration of oil within the refrigeration circuit of a purpose-built air-water heat pump is described. The construction of the heat pump, which could be operated in single or two-stage mode, is described and the results obtained from the investigations are presented. The properties of lubricants used in heat pumps are discussed and the techniques used to measure the oil concentration in the various parts of the refrigeration cycle, which include the use of an infra-red spectrometer, are described.

  8. Study of heat transfer in superconducting cable electrical insulation of accelerator magnet cooled by superfluid helium; Etude des transferts de chaleur dans les isolations electriques de cables supraconducteurs d'aimant d'accelerateur refroidi par helium superfluide

    Energy Technology Data Exchange (ETDEWEB)

    Baudouy, B

    1996-10-04

    Heat transfer studies of electrical cable insulation in superconducting winding are of major importance for stability studies in superconducting magnets. This work presents an experimental heat transfer study in superconducting cables of Large Hadron Collider dipoles cooled by superfluid helium and submitted to volume heat dissipation due to beam losses. For NbTi magnets cooled by superfluid helium the most severe heat barrier comes from the electrical insulation of the cables. Heat behaviour of a winding is approached through an experimental model in which insulation characteristics can be modified. Different tests on insulation patterns show that heat transfer is influenced by superfluid helium contained in insulation even for small volume of helium (2 % of cable volume). Electrical insulation can be considered as a composite material made of a solid matrix with a helium channels network which cannot be modelled easily. This network is characterised by another experimental apparatus which allows to study transverse and steady-state heat transfer through an elementary insulation pattern. Measurements in Landau regime ({delta}T{approx}10{sup -5} to 10{sup -3} K) and in Gorter-Mellink regime ({delta}T>10{sup -3} K) and using assumptions that helium thermal paths and conduction in the insulation are decoupled allow to determine an equivalent channel area (10{sup -6} m{sup 2}) and an equivalent channel diameter (25 {mu}). (author)

  9. Tokamak electron heat transport by direct numerical simulation of small scale turbulence; Transport de chaleur electronique dans un tokamak par simulation numerique directe d'une turbulence de petite echelle

    Energy Technology Data Exchange (ETDEWEB)

    Labit, B

    2002-10-01

    In a fusion machine, understanding plasma turbulence, which causes a degradation of the measured energy confinement time, would constitute a major progress in this field. In tokamaks, the measured ion and electron thermal conductivities are of comparable magnitude. The possible sources of turbulence are the temperature and density gradients occurring in a fusion plasma. Whereas the heat losses in the ion channel are reasonably well understood, the origin of the electron losses is more uncertain. In addition to the radial velocity associated to the fluctuations of the electric field, electrons are more affected than ions by the magnetic field fluctuations. In experiments, the confinement time can be conveniently expressed in terms of dimensionless parameters. Although still somewhat too imprecise, these scaling laws exhibit strong dependencies on the normalized pressure {beta} or the normalized Larmor radius, {rho}{sub *}. The present thesis assesses whether a tridimensional, electromagnetic, nonlinear fluid model of plasma turbulence driven by a specific instability can reproduce the dependence of the experimental electron heat losses on the dimensionless parameters {beta} and {rho}{sub *}. The investigated interchange instability is the Electron Temperature Gradient driven one (ETG). The model is built by using the set of Braginskii equations. The developed simulation code is global in the sense that a fixed heat flux is imposed at the inner boundary, leaving the gradients free to evolve. From the nonlinear simulations, we have put in light three characteristics for the ETG turbulence: the turbulent transport is essentially electrostatic; the potential and pressure fluctuations form radially elongated cells called streamers; the transport level is very low compared to the experimental values. The thermal transport dependence study has shown a very small role of the normalized pressure, which is in contradiction with the Ohkama's formula. On the other hand, the crucial role of the electron normalized Larmor has been emphasized: the confinement time is inverse proportional to this parameter. Finally, the low dependence of turbulent transport with the magnetic shear and the inverse aspect ratio is also reported. Although the transport level observed in the simulations is low compared to the experiments, we have tried a direct confrontation with Tore Supra results. This tokamak is well designed to study the electron heat transport. Keeping most of the parameters from a well referenced Tore Supra shot, the nonlinear simulation gives a threshold quite close to the experimental one. The observed turbulent conductivity is a factor fifty lower than the experimental one. An important parameter can not be matched: the normalized Larmor radius, {rho}{sub *}. This limitation has to be overcome in order to confirm this results. Finally, a rigorous confrontation between this result and gyrokinetic simulations has to conclude that the ETG instability cannot describe electron heat loses in tokamaks. (author)

  10. Modeling and experimental study of heat transfer in innovate building components for industrial production; Modelisation et etude experimentale des echanges de chaleur dans des composants innovants de batiment industriels

    Energy Technology Data Exchange (ETDEWEB)

    Lacena-Neildez, A.

    2000-05-15

    The main objective of the thesis is the study of a new roof thermal behaviour with the thermal transfer by radiation and convection in order to propose an alternative to the mechanical air-conditioning in the overseas islands, and to determine the way of improving the energy performance. Two fundamental results were obtained. First, the coating has a great importance in relation with the radiative properties. Secondly, air channel geometries can complete insufficient coatings in their cooling purpose. In this thesis, both experimental and modelling analyses were carried out. A solar simulator was used for the experiment to carry out a comparative study of prototypes. A performance indicator was defined; it is the eliminated flux, because the temperature is not sufficient to describe the heat exchange. At the same time, the radiative properties of coatings were measured and a characterisation of paints allows to start a new research of innovative infrared reflective paints. A mono-dimensional model was developed describing thermal exchanges in an air channel component. A sensibility study was carried out which allows to determine the main parameters. The experimental study validated the model in rear flux, more realistic than stagnation. Finally, the feasibility of this new steel component was concluded by a technical-economical study. (author)

  11. Heat and mass transfers between two stratified liquid phases in a bubbly flow; Echanges de masse et de chaleur entre deux phases liquides stratifiees dans un ecoulement a bulles

    Energy Technology Data Exchange (ETDEWEB)

    Lapuerta, C

    2006-10-15

    During an hypothetical major accident in a pressurized water reactor, the deterioration of the core can produce a stratified pool crossed by a bubbly flow. This latter strongly impacts the heat transfers, whose intensities are crucial in the progression of the accident. In this context, this work is devoted to the diffuse interface modelling for the study of an-isothermal incompressible flows, composed of three immiscible components, with no phase change. In the diffuse interface methods, the system evolution is driven by the minimization of a free energy. The originality of our approach, derived from the Cahn-Hilliard model, is based on the particular form of the energy we proposed, which enables to have an algebraically and dynamically consistent model, in the following sense: on the one hand, the triphasic free energy is equal to the diphasic one when only two phases are present; on the other, if a phase is not initially present then it will not appear during system evolution, this last property being stable with respect to numerical errors. The existence and the uniqueness of weak and strong solutions are proved in two and three dimensions as well as a stability result for metastable states. The modelling of an an-isothermal three phase flow is further accomplished by coupling the Cahn-Hilliard equations with the energy balance and Navier-Stokes equations where surface tensions are taken into account through volume capillary forces. These equations are discretized in time and space in order to preserve properties of continuous model (volume conservation, energy estimate). Different numerical results are given, from the validation case of the lens spreading between two phases, to the study of the heat and mass transfers through a liquid/liquid interface crossed by a single bubble or a series of bubbles. (author)

  12. Data acquisition interface for calculating heat diffusion in certain electronic circuits; Interface d`acquisition des donnees permettant le calcul de la diffusion de la chaleur dans certains circuits electroniques

    Energy Technology Data Exchange (ETDEWEB)

    Spiesser, Ph.

    1996-05-01

    A user interface has been developed for geometrical and thermal data acquisition, in order to allow calculations of heat diffusion in certain types of electronic circuits such as power hybrids and compact electronic modules, using computerized simulations. Data management, structure and organization, the data acquisition interface program, and variables and sources, are described

  13. Heat wave during the summer 2003: relationship between temperature, air pollution and mortality in nine French towns; Vague de chaleur de l'ete 2003: relations entre temperatures, pollution atmospherique et mortalite dans neuf villes francaises

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The objective of this study is to estimate, by taking the a particular period of summer 2003, the relationship between the exposure to ozone and the mortality risk. This estimation has for aim to realize a more valid, scientifically, evaluation of sanitary impact, for the period of heat wave that this one that could has been lead from anterior results. This study searches also to estimate, for the period of heat wave, the excess of mortality risk linked with the exposure to temperature and air pollution and the relative part of each of these factors in this combined effect. The analysis searches to evaluate an eventual displacement of mortality at short term that is to say a period of under mortality occurring at the immediate declining of the heat wave. (N.C.)

  14. Epistemologi dan Keterbatasan Teori Gravitasi

    Directory of Open Access Journals (Sweden)

    Erwin Erwin

    2017-08-01

    Full Text Available Peristiwa tentang kecenderungan jatuhnya benda-benda menuju pusat bumi dan keteraturan peredaran planet dan benda-benda langit lainnya dalam tata surya dahulu dianggap dua fenomena yang berbeda. Mekanika benda langit dan mekanika bumi yang sebelumnya merupakan dua pengetahuan yang terpisah, dianggap satu kesatuan oleh Sir Isaac Newton. Newton mengemukakan hukum gravitasi umum yaitu gaya tarik menarik antara dua benda besarnya sebanding dengan massa masing-masing benda dan berbanding terbalik dengan kuadrat jarak antara kedua benda. Hukum gravitasi ini sukses menjalaskan bagaimana benda cendrung jatuh menuju pusat bumi dan peredaran planet dan benda-benda langit lain mengelilingi matahari dalam sistem tata surya. Namun hukum gravitasi Newton ternyata tidak sepenuhnya tepat, beberapa hal dapat dijelaskan dengan hukum relativitas Einstein, namun demikian hukum relativitas Einstein juga dicurigai masih perlu diamandemen agar dapat menjelaskan fenomena alam dengan tepat.

  15. EPISTEMOLOGI DAN KETERBATASAN TEORI GRAVITASI

    Directory of Open Access Journals (Sweden)

    Erwin Erwin

    2017-08-01

    Full Text Available Peristiwa tentang kecenderungan jatuhnya benda-benda menuju pusat bumi dan keteraturan peredaran planet dan benda-benda langit lainnya dalam tata surya dahulu dianggap dua fenomena yang berbeda. Mekanika benda langit dan mekanika bumi yang sebelumnya merupakan dua pengetahuan yang terpisah, dianggap satu kesatuan oleh Sir Isaac Newton. Newton mengemukakan hukum gravitasi umum yaitu gaya tarik menarik antara dua benda besarnya sebanding dengan massa masing-masing benda dan berbanding terbalik dengan kuadrat jarak antara kedua benda. Hukum gravitasi ini sukses menjalaskan bagaimana benda cendrung jatuh menuju pusat bumi dan peredaran planet dan benda-benda langit lain mengelilingi matahari dalam sistem tata surya. Namun hukum gravitasi Newton ternyata tidak sepenuhnya tepat, beberapa hal dapat dijelaskan dengan hukum relativitas Einstein, namun demikian hukum relativitas Einstein juga dicurigai masih perlu diamandemen agar dapat menjelaskan fenomena alam dengan tepat.

  16. ISLAM DAN RADIKALISME: Upaya Antisipasi dan Penanggulangannya

    Directory of Open Access Journals (Sweden)

    Idrus Ruslan

    2017-02-01

    Full Text Available Sejak tragedi pemboman WTC tanggal 11 September 2001 yang disusul dengan rangkaian peledakan bom di sejumlah negara, banyak orang non Muslim yang berasumsi bahwa ajaran Islam identik dengan radikalisme. Walaupun assumsi yang berkembang itu dapat dimaklumi, namun keyakinan tersebut tentu saja tidak sepenuhnya benar. Karena meskipun terdapat sekelompok orang Islam yang berbuat radikal, akan tetapi mayoritas Muslim justru bertentangan dengan mereka. Lagi pula, jika dicermati secara mendalam, sesungguhnya Islam sama sekali tidak mentolerir tindakan radikal. Ia adalah agama kasih sayang yang sangat mendodrong penganutnya untuk berbuat baik terhadap orang lain, termasuk kepada orang-orang non-Muslim. Artikel ini menawarkan beberapa upaya strategis dalam mengantisipasi dan menanggulangi bahaya radikalisme-terorisme.

  17. Healthy Places for Healthy People

    Science.gov (United States)

    Describes the Healthy Places for Healthy People technical assistance program that helps communities create walkable, healthy, economically vibrant places by engaging with local health care facility partners

  18. Pertumbuhan dan Perkembangan Uterus dan Plasenta Babi dengan Superovulasi

    Directory of Open Access Journals (Sweden)

    REVOLSON ALEXIUS MEGE

    2007-03-01

    Full Text Available Forty eight gilts with average body weight of 107.83 ± 5.08 kg were used in experiments to study the use of pregnant mare serum gonadotrophin (PMSG and human chorionic gonadotrophin (hCG as superovulation agent in gilts to increase piglet production. Four groups of twelve gilts were injected with PMSG dan hCG dose levels of 0, 600, 1200, and 1800 IU/gilt. Injections were conducted three days before estrus. During gestation, gilts were placed in colony pigpens. On days 15, 35, and 70 of gestation, gilts were slaughtered in order to measure the number of corpus luteum, growth and development of the uterus and placenta. Blood samples were collected to determine progesterone and estradiol concentrations. The resuts showed that superovulation dose levels of 600 to 1200 IU/gilt increased progesterone and estradiol secretions, growth and development of the uterus and placenta in gestation ages of 15, 35, and 70 days. It is concluded that superovulation with dose of 600 to 1200 IU can improve the gilts reproduction.

  19. Orbit Geostasioner (GSO dalam Hukum Internasional dan Kepentingan Nasional Indonesia

    Directory of Open Access Journals (Sweden)

    Agus Pramono

    2013-04-01

    Full Text Available Space Treaty 1967 merupakan landasan Hukum Internasional (Ruang Angkasa atas pemanfaatan dan eksploitasi ruang angkasa termasuk bulan dan benda-benda angkasa lainnya. Pemanfaatan dan eksploitasi ruang angkasa tersebut dalam kenyataannya hanya mungkin dilakukan secara optimal oleh negara-negara maju yang memiliki sumber daya dan kemampuan teknologi maju. GSO merupakan salah satu sumber daya alam terbatas yang merupakan tempat strategis untuk penempatan satelit komunikasi. Satelit komunikasi pada dasarnya menjadi wahana utama dan sangat penting dalam mendukung berbagai kegiatan masyarakat dunia umumnya dan kepentingan nasional Indonesia pada khususnya meliputi aspek ekonomi, politik, sosial budaya maupun pertahanan keamanan. Dengan dilandasi semangat kerjasama internasional dalam memanfaatkan GSO untuk tujuan bersama bagi kemanusian dan perdamaian, disepakati prinsip kesetaraan akses di antara negara-negara. Perjuangan Indonesia bersama negara-negara katulistiwa lainnya melalui berbagai fora internasional terus dilanjutkan agar bisa mencapai pengaturan internasional atas pemanfaatan GSO lebih mencerminkan keadilan mengingat letak GSO berada pada posisi di atas ruang angkasa negara-negara katulistiwa. Space treaty 1967 is the international law of space based in utilizing and exploiting of the space including Moon and other space objects. The utilization and exploitation of the space is only conducted by the developed countries, which has the resources and developed technology. Geostasioner is one of the limited natural resources as a strategic place for communication satellite orbite. The communication satellite is the major vehicle to endorse many kind of the world people activities, and especially for the national interest such as economics, politics, social and culture, and also defence. The equal principle among states is based on the international cooperation in utilizing GSO for the human peace. Indonesia with other equatorial countries

  20. Empat Koreografer Minangkabau: Dibaca dalam Teks Matrilineal dan Patrilineal

    Directory of Open Access Journals (Sweden)

    Surheni Surheni

    2015-10-01

    Full Text Available Artikel ini membahas empat koreografer Minangkabau yaitu Gusmiati Suid, Huriah Adam, Syofyani Bustamam, dan Syahril dari perspektif matrilineal dan patrilineal. Teks matrilineal tidak hanya dipandang dari sisi genealogis, tetapi juga dari sudut pandang budaya. Berdasarkan penelitian disimpulkan bahwa partisipasi perempuan di luar wilayah domestiknya terbias dalam seni tari. Perempuan tidak dinantikan hanya untuk menyemarakkan dengan tebaran pesona keindahan ragawi. Ia mampu menjadi sumber ide dan tema, pelaku, pencipta, pengatur, dan penyelenggara, atau sarana mobilitas seni pertunjukan. Keempat koreografer lahir dan dibesarkan di Minangkabau akan tetapi berkiprah di tiga wilayah yang berbeda. Gusmiati Suid di Jakarta, Huriah Adam di Sumatera Barat, Syofyani di Padang, dan Syahril di Padangpanjang. Sebagai koreografer yang lahir dan dibesarkan dalam kultur Minangkabau tentu keempat koreografer ini ikut merasakan betapa dilematis posisi perempuan dalam masyarakat Minangkabau.   This article discusses about four choreographers of Minangkabau, among others are Gusmiati Suid, Huriah Adam, Syoyani Bustamam, and Syahril seen from the perspective of matrilineal and Patrilineal. The matrilineal text cannot only be seen from the genealogical side but it can be viewed from the cultural standpoint. Based on the research result it can be concluded that women participation outside their domestic area is also biased in dance performing arts. Women are not only expected to embellish with their scattering of physical enchanting beauty. They can be the source of ideas and themes, the actress,the creator,the manager, and the event organizer, or the mean of performing arts mobility. These four choreographers were born and grown up in Minangkabau, however, they have actively expanded their career in three different places. Gusmiati Suid’ s career is in Jakarta, Huriah Adam is in West Sumatra , Syoyani is in Padang, and Syahril is in Padangpanjang. As the

  1. SAFETY DAN SANITASI DI AREA KITCHEN AMAROOSSA HOTEL BANDUNG

    Directory of Open Access Journals (Sweden)

    Chandra Rizki Yano Putra

    2016-05-01

    Full Text Available Abstrac - In the tourism industry sectors of the hospitality industry is engaged in services, very influential on the development of tourism. Hotels are required to provide satisfaction to both guests of the facilities provided to meet the needs of guests. The hotel must be able to create a comfortable atmosphere for guests, one way to improve safety and sanitation in all department. This observation examines the main problems, namely: "How is safety and sanitation in the kitchen area, what is the procedure to clean kitchen areas, wash your food how procedures and equipment in the kitchen, and whatever obstacles that occur during operations in the kitchen". The method used in this thesis is "Descriptive Method". Data collection techniques used by direct observation to the object of research, conduct interviews with employees Amaroossa Hotel Bandung kitchen, equipped with library research to obtain theoretical data as a basis for discussion. The results of this observation that the state of safety and sanitation of kitchen area has not met the requirements of safety and sanitation. Cleaning the kitchen area has been going well, but spacious kitchen is limited. Washing equipment and food ingredients not meet safety and sanitation that is using the sink in the same place for washing. Operational constraints in a narrow kitchen space and limited washing tubs and equipment. . Keyword: Safety, Health, Kitchen   Abstrak - Dalam industri kepariwisataan, perhotelan merupakan sektor industri yang bergerak dalam bidang jasa dan sangat berpengaruh terhadap perkembangan kepariwisataan. Hotel dituntut dapat memberikan kepuasan kepada tamu baik dari fasilitas yang disediakan dalam memenuhi kebutuhan tamu. Pihak hotel harus mampu menciptakan suasana yang nyaman untuk tamu, salah satu caranya meningkatkan safety dan sanitasi pada semua department. Penelitian ini mengkaji permasalahan pokok yaitu: “Bagaimana safety dan sanitasi di area kitchen, bagaimana

  2. ARSITEKTUR VERNAKULAR NABIRE DAN KONDISI NABIRE PASCA GEMPA

    Directory of Open Access Journals (Sweden)

    C. Sri Gayatri

    2007-01-01

    Full Text Available The natural disaster in Nabire in February 2004 and November 2004 has left a noumerous effects on buildings. Many buildings have destroyed because of the terrifying effect of natural disaster which caused a big loss both for material and for the human safety. However, the misapplication of construction and inappropriate choice of material almost cause the terrible damage. After the natural disaster passed, the only left is mostly on the long time needed to build the buildings for people who suffer from the disaster. Because of this problem above, many people usually stay in uncomfortable places such a tend, and this condition creates social and health problems. Concerning the problem above, it is needed to create the "quick built house" which is hopefully can be accepted by the community to cope with the terrifying effect of the natural disaster.In the first year of this research, the data concerning traditional architecture and vernacular architecture in Nabire will be collected. This step will be done in order to understand more detail about all the problem faced and identified all the potential aspects which can be developed to build house for people. The deepest study of vernacular architecture is expected not only to make the house close to the uniqueness of the local activities and culture, but also to make it understandable and built easily by the people/community, because its construction and architecture have become part of their life. Abstract in Bahasa Indonesia : Pada saat bencana alam di Nabire yang terjadi Februari 2004 dan November 2004, banyak bangunan roboh dan rusak. Kerugian sangat besar dan mengakibatkan kerugian baik material maupun keselamatan manusia. Kerusakan yang parah sering diakibatkan oleh salahnya penerapan konstruksi dan salah dalam pemilihan bahan bangunan. Sementara itu pasca bencana, menyisakan kesulitan berupa lamanya membangun bangunan penampungan korban bencana, sehingga seringkali korban bencana hanya

  3. DIVERSITAS DAN KERAPATAN MANGROVE, GASTROPODA DAN BIVALVIA DI ESTUARI PERANCAK, BALI

    OpenAIRE

    Susiana; Ali, Syamsu Alam; Rukminasari, Nita

    2011-01-01

    Penelitian ini bertujuan membandingkan diversitas dan kerapatan mangrove dengan kepadatan gastropoda dan bivalvia di mangrove alami dan rehabilitasi. Pengukuran ekosistem mangrove menggunakan transek kuadrat 10 m x 10 m. Kelimpahan dan kepadatan gastropoda dan bialvia menggunakan transek kuadrat berukuran 1 m x 1 m. Analisis nMDS, cluster untuk melihat hubungan karekteristik mangrove alami dan rehabilitasi dianalisis secara deskriptif dan analisis regresi untuk mendetermi...

  4. Strangers in Familiar Places

    DEFF Research Database (Denmark)

    Muhr, Sara Louise

    2012-01-01

    Employees working across multiple cultures are exposed to a vast number of different norms and values, and consequentially work is often a struggle to retain a coherent sense of self. However, when international workers travel, they also encounter more bland spaces where familiarity and similarity...... are important. These spaces appear culturally generic to the Western traveler, but are highly Westernized to bring comfort to Western employees traveling in foreign cultures. This paper argues that these spaces are important in cross-cultural identity work in the sense that international workers – professional...... strangers – need these places to belong and relate to familiarity and to regain a sense of identity. Drawing on an illustrative empirical vignette of an international consultant, I demonstrate how culturally generic spaces can be used in identity work of an international relations consultant....

  5. "Same Room, Safe Place".

    Science.gov (United States)

    Keene Woods, Nikki

    2017-04-01

    There are many different professional stances on safe sleep and then there is the reality of caring for a newborn. There is a debate among professionals regarding safe sleep recommendations. The continum of recommendations vary from the American Academy of Pediatrics (AAP) Safe Sleep Guidelines to the bed-sharing recommendations from the Mother-Baby Behavioral Sleep Laboratory. The lack of consistent and uniform safe sleep recommendations from health professionals has been confusing for families but has more recently raised a real professional ethical dilemma. Despite years of focused safe sleep community education and interventions, sleep-related infant deaths are on the rise in many communities. This commentary calls for a united safe sleep message from all health professionals to improve health for mothers and infants most at-risk, "Same Room, Safe Place."

  6. Pushing Personhood into Place

    DEFF Research Database (Denmark)

    Bidwell, Nicola J.; Winschiers-Theophilus, Heike; Kapuire, Gereon K.

    2011-01-01

    for generations; but technology-use can inadvertently displace knowledge for communities with knowledge traditions that differ from those of technology-design. Devices which are sensitive to users' locations, combined with platforms for social networking and user-generated-content, offer intriguing opportunities...... hope our reflections will inspire others to examine the spatial, temporal and social affordances of technologies within the bonds of rural communities in digitally-sparse 'under-developed' settings....... about personhood, community and place. We adopt a critical attitude towards assumptions about spatial, temporal and social logics and literacies to promote a design sensitivity to local experiences of locations. This motivates us to emphasize connections, not points, and the bodily absorption...

  7. Special concretes for protection in piles (1963); Les betons speciaux dans la protection des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Condat, M.J.; Lafore, P.; Rastoin, J. [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    la mise en oeuvre, la stabilite dans le temps et la tenue aux rayonnements et a la chaleur. Des annexes et des tableaux donnent des precisions et des valeurs numeriques. L'annexe 1 traite de la question de l'eau dans les betons. L'annexe 2 donne une classification des betons basee principalement aur leur densite. Enfin dix tableaux donnent pour seize betons particulierement representatifs, les compositions ainsi que les valeurs des caracteristiques physiques et mecaniques. (auteurs)

  8. Special concretes for protection in piles (1963); Les betons speciaux dans la protection des piles (1963)

    Energy Technology Data Exchange (ETDEWEB)

    Condat, M J; Lafore, P; Rastoin, J [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1963-07-01

    stabilite dans le temps et la tenue aux rayonnements et a la chaleur. Des annexes et des tableaux donnent des precisions et des valeurs numeriques. L'annexe 1 traite de la question de l'eau dans les betons. L'annexe 2 donne une classification des betons basee principalement aur leur densite. Enfin dix tableaux donnent pour seize betons particulierement representatifs, les compositions ainsi que les valeurs des caracteristiques physiques et mecaniques. (auteurs)

  9. DAKWAH DAN PEMBERDAYAAN PEREMPUAN

    Directory of Open Access Journals (Sweden)

    Siti Nurmahyati

    2017-02-01

    Full Text Available Da’wah is an attempt to persuade and influence others in realizing the teachings of Islam, to achieve worldly prosperity and welfare of the hereafter. The success was fueled by propaganda aspects are interrelated, anatara preachers, propaganda material, propaganda strategy, mad’u (target da’wah. The number of women in this country nearly half of people (49.36. therefore, it is important to empower women in da’wah to build their own people in consciousness and religious activities that provide the basics of life prosperous world and hereafter.   Dakwah merupakan suatu upaya untuk mengajak dan mempengaruhi orang lain dalam merealisasikan ajaran Islam, untuk mencapai tujuan kesejahteraan duniawi maupun kesejahteraan ukhrawi. Keberhasilan tersebut pun dipicu oleh berbagai aspek dakwah yang saling terkait, antara juru dakwah, materi dakwah, strategi dakwah, mad’u (sasaran dakwah. Jumlah kaum perempuan di negara ini hampir mencapai separuh dari jumlah masyarakatnya (49,36. Oleh karena itu, sangat penting sekali pemberdayaan perempuan dalam dakwah untuk membangun kaumnya sendiri dalam kesadaran dan aktivitas-aktivitas keagamaan yang memberikan dasar kehidupan sejahtera duniawi dan ukhrawi.

  10. ASIMETRI INFORMASI DAN UNDERPRICING

    Directory of Open Access Journals (Sweden)

    Tety Anggita Safitri

    2013-03-01

    Full Text Available Tujuan penelitian ini adalah untuk menguji pengaruh asimetri informasi terhadap underpricing. Penelitian ini menggunakan sampel 63 perusahaan yang melakukan penawaran umum perdana di Bursa Efek Indonesia dalam kurun waktu 2005-2010. Analisis data menggunakan regresi linier berganda, yaitu menguji proksi asimetri informasi yang terdiri atas ukuran perusahaan, umur perusahaan, proporsi saham yang ditawarkan kepada masyarakat, reputasi underwriter dan reputasi auditor terhadap underpricing. Hasil penelitian ini mengindikasikan bahwa reputasi underwriter dan reputasi auditor berpengaruh terhadap underpricing. Ukuran perusahaan, umur perusahaan dan proporsi saham yang ditawarkan tidak berpengaruh terhadap underpricing.The aim of this research is to examine the effect of assymetric information on underpricing. This research used a sample of 63 companies that make initial public offering on the Indonesia Stock Exchange in the period of 2005-2010. The data analysis is using multiple linear regression, which is testing the proxy of asymmetric information which consists of the firm size, the firm age, the proportion of shares offered to the public, underwriter reputation and auditor reputation on underpricing. This research indicates that underwriter reputation and auditor reputation have a significant effect on underpricing. The firm size, the firm age and the proportion of shares offered to the public have no significant effect on underpricing.

  11. Former les chefs de file émergents dans le domaine des politiques ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Il est crucial de mettre en place une base de ressources humaines locales dans divers secteurs de la net-économie pour élaborer et maintenir les secteurs ... file en matière de politiques qui possèdent les compétences et l'expérience nécessaires pour mener des recherches dans l'intérêt public afin d'orienter les politiques.

  12. Technical Training - Places available

    CERN Multimedia

    Monique Duval

    2003-01-01

    Places are available in the following courses: HeREF-2003 : Techniques de la réfrigération Hélium :  6 - 10.10.2003  (7 demi-journées, cours en français avec support en anglais)  The Java Programming Language Level 1:  6 - 7.10.2003  (2 days) Java 2 Enterprise Edition - Part 2: Enterprise JavaBeans: 8 - 10.10.2003  (3 days) FileMaker - niveau 1 : 9 & 10.10.03 (2 jours) EXCEL 2000 - niveau 1 :  20 & 22.10.03  (2 jours) AutoCAD 2002 - niveau 1 :  20, 21, 27, 28.10.03  (4 jours) CLEAN-2002 : Working in a Cleanroom: 23.10.03  (half day, free of charge) Plannification de projet avec MS-Project/ Project Scheduling with MS-Project : 2 sessions:  23.10 & 4.11.03  (2 jours/2 days and 18 &25.11.03 langue à définir/language to be defined) AutoCAD 2002 - Level 1:  3, 4, 12, 13.11.03  (4 days) Introduction to Pspice:  4.11.03p.m.  (half-day) AutoCAD 2002 - niveau 2 :  10 & 11.11.03  (2 jours) ACCESS 2000 - niveau 1 :  13 & 14.11.03  (2 jours) A...

  13. DAMPAK NEGATIF PERKEMBANGAN TEKNOLOGI INFORMATIKA DAN KOMUNIKASI DAN CARA ANTISIFASINYA

    Directory of Open Access Journals (Sweden)

    I Gede Ratnaya

    2011-03-01

    Full Text Available Sampai saat ini perkembangan ilmu pengetahuan telah menghantarkan masyarakat menuju babak baru yaitu babak yang memanfaatkan peralatan-peralatan yang merupakan hasil dari teknologi. Penggunaan tenaga manusia yang semakin hari semakin kecil volumenya sering kali menyebabkan orang kehilangan pekerjaannya karena tugasnya telah tergantikan oleh peralatan atau mesin. Sebagai sarana penyampaian informasi dan komunikasi, komputer bisa dipakai sebagai sarana berinternetan. Lewat internet orang bisa mencari bermacam-macam informasi dan berkomunikasi. Peran yang dapat diberikan oleh aplikasi teknologi informasi ini adalah mendapatkan informasi untuk kehidupan pribadi seperti informasi tentang kesehatan, hobi, rekreasi, dan rohani. Selain memberikan keuntungan, ternyata peralatan teknologi informasi dan komunikasi juga memberikan dampak negatif bagi penggunanya. Dampak negatif tersebut muncul sebagai akibat dari penggunaan yang salah atau tidak bertanggung jawab dari yang menggunakan. Beberapa dampak negatif tersebut adalah 1. Anak lebih banyak menghabiskan waktu menonton TV ketimbang melakukan hal lainnya (seperti belajar dan olah raga, 2. Anak kehilangan kemampuan berbaur dengan masyarakat dan cenderung nyaman dengan kehidupan online, 3 Adanya pelanggaran hak cipta, 4.  Kejahatan di internet, 5. Penyebaran virus komputer, dan 6. Pornografi, perjudian, penipuan, tayangan kekerasan. Adapun cara mengatasi dampak-dampak negatif tersebut adalah : 1. Gunakan teknologi untuk menjalin hubungan dengan orang yang sudah dikenal, 2. Cari komunitas positif  yang sering melakukan pertemuan didunia nyata, 3. Perlunya penegakkan hukum yang berlaku dengan dibentuknya polisi internet, 4. Menghindari pemakaian telepon seluler yang berfitur canggih oleh anak-anak dibawah umur dan lebih mengawasi penggunaan telepon seluler, 5. Perbanyak membaca buku-buku yang bersifat edukatif dan bersifat keimanan serta aplikasi komputer yang bersifat mendidik, dan 6. Perlunya pengaturan

  14. Heat exchanges in nitrogen and hydrogen boiling under pressure; Echanges thermiques dans l'azote et l'hydrogene bouillant sous pression

    Energy Technology Data Exchange (ETDEWEB)

    Roubeau, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    The heat transfer between a horizontal wall and boiling nitrogen or hydrogen has been studied from atmospheric pressure to 2/3 of the critical pressure. The q = f(T) curves are rather well defined for nitrogen but more uncertain for hydrogen. In general, the measured {delta}T are inferior to those given by various authors using the wire method. The q{sub max} = f(P) more reproducible curves show for both fluids a maximum at about 0.4 P{sub cr} say 45 watt cm{sup -2} for 12.5 atm in nitrogen and 16 watt cm{sup -2} for 5.5 atm in hydrogen. Beyond, calefaction appears with a reduced dissipated power, rough reduction (90 per cent in few degrees) for nitrogen, smoother for hydrogen. (author) [French] On a etudie l'echange de chaleur entre une paroi horizontale et l'azote ou l'hydrogene bouillant depuis la pression atmospherique jusqu'au 2/3 de la pression critique. Les courbes q = f(T) sont assez bien definies pour l'azote mais accusent une marge d'incertitude pour l'hydrogene. En generale, les {delta}T mesurees sont inferieures a celles obtenues par divers auteurs utilisant la methode du fil. Les courbes plus reproductibles de q{sub max} f(P) passent par un maximum pour les deux liquides a environ 0,4 P{sub cr}, c'est-a-dire 45 watt cm{sup -2} pour 12,5 atm dans l'azote et 16 watt cm{sup -2} pour 5,5 atm dans l'hydrogene. Au-dela, la calefaction se produit avec un pouvoir dissipatif reduit, une reduction brusque pour l'azote (90 p. 100 en quelques degres) et plus reguliere pour l'hydrogene. (auteur)

  15. KETERGANTUNGAN ONLINE GAME DAN PENANGANANNYA

    Directory of Open Access Journals (Sweden)

    Ridwan Syahran

    2015-06-01

    Full Text Available Penelitian ini dimaksudkan untuk mengetahui perilaku yang ditimbulkan dari kecanduan bermaian online game pada siswa SMP Negeri 1 Palu yang meliputi faktor-faktor penyebab kecanduan, keadaan psikologis yang ditimbulkan dari kecanduan bermain online game dan dampak-dampak yang ditimbulkan dari kecanduan bermain online game.Pendekatan penelitian ini adalah penelitian kualitatif dengan jenis penelitian studi kasus dengan berdasarkan responden dan informan sebagai bahan sumber data. Dalam proses pengumpulan data digunakan teknik observasi dan wawancara, dimana setelah data diperoleh selanjutnya dianalisis dengan menggunakan analisis deskriptif kualitatif.Berdasarkan hasil penelitian ini, bahwa subyek (RZ dan (MT, kedua subyek penelitian menjadi ketergantungan atau kecanduan untuk bermain online game yang dikarenakan tersedianya beberapa fasilitas pendukung untuk bermain game di rumah, adanya faktor sosial dari pertemanan dengan teman bermain dan keingintahuan yang sangat besar terhadap suatu jenis game. Penanganan ketergantungan game online dengan bantuan dari berbagai pihak terutama pihak sekolah memberikan kepercayaan kepada konselor sekolah atau guru BK untuk mengadakan seminar kepada orang tua siswa tentang game online dan masalah yang akan ditimbulkan, mengatur waktu belajar dan bermain anak, memasukkan materi tentang game online dan dampaknya kepada siswa serta memberikan penyaluran yang baik dalam memilih game yang edukatif serta Menjalin komunikasi interpersonal agar anak dapat terbuka dengan orang tua.

  16. A woman's rightful place?

    Science.gov (United States)

    1993-04-01

    Rural development projects in sub-Saharan Africa tend not to succeed because they do not consider women's role and their significance, even though women constitute 70% of agricultural workers, 80% of food producers, 100% of people who prepare meals, and 60-90% do food marketing. Development specialists ignore women because they are not involved in political activities and in decision making. As long as women and women's contributions are not considered, rural development projects will remain inefficient and development will not take place. Thus, projects must include women as agents and beneficiaries of development in key sectors of the economy. Rural development specialists must also consider the effect male labor emigration has on rural women. For example, drought has forced many men to leave their villages, leaving a work force consisting of 95% women to fight desertification. All too often, women have no or limited land ownership rights, thereby keeping them from improving the land, e.g., planting perennial fruit crops. They also tend to be hired hands rather than food producers. They cannot obtain bank loans because they do not own land, and because they are often illiterate (over 90% female illiteracy in 28 African countries), they can neither understand nor complete bank loan forms. Rural development projects further alienate women by aiming training programs to men or by using male agricultural extension agents. Women react to this alienation by rejecting projects that do not benefit them and follow more profitable activities which sometimes interfere with projects. Thus, rural development programs need to invest in women to ensure viable and efficient sustainable development.

  17. Place attachment, place identity and aesthetic appraisal of urban landscape

    Directory of Open Access Journals (Sweden)

    Jaśkiewicz Michał

    2015-12-01

    Full Text Available As the aesthetic of the Polish cities became a topic of wider discussions, it is important to detect the potential role of human-place relations. Two studies (N = 185 & N = 196 were conducted to explore the relationship between place attachment, place identity and appraisal of urban landscape. Satisfaction with urban aesthetic was predicted by two dimensions of place attachment (place inherited and place discovered, local identity (on the trend level and national-conservative identity. Place discovered and European identity were also predictors of visual pollution sensitivity. Place discovered is considered as more active type of attachment that permits both a positive bias concerning the aesthetics of one’s city, and a stronger criticism of the elements that can potentially violate the place’s landscape.

  18. Contribution to the theoretical study of the thermal diffusion of point defects in metals; Contribution a l'etude theorique et experimentale de la thermodiffusion de defauts ponctuels dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Gerl, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-01-01

    An experimental study of diffusion under a thermal gradient shows that the heat of transport Q-bar* for self-diffusion in the noble metals is very low (a few hundredths of I eV) and relatively large in Fe{alpha} (+ 1,7 {+-} 0,8 eV). The apparent heat of transport of Sb in Cu, measured by the 'thin layer technique' is -0.21 {+-}0,05 eV.The influence of the density of sources and sinks of vacancies on the observed vacancy flux is determined by a calculation involving the thermodynamics of irreversible processes; when the mean distance between sources and sinks is larger than a certain limiting value, the vacancy flux vanishes.The contribution to the heat of transport of electron-defect (q*e) and phonon-defect (q*p) collisions is calculated using a semi-classical approach and by a quantum mechanical method; q*e is related to the resistivity {delta} -{rho}{sub d} and to the thermoelectric power of the defect at its stable position and at its saddle-point. A relation between q*e and the effective valency Z* of the defect allows a determination of {delta}{sub {rho}}{sub d} at the saddle-point. Numerical values of q*e are given for some impurities in noble metals. (author) [French] L'etude experimentale de la diffusion sous gradient de temperature montre que la chaleur de transport d'autodiffusion des metaux nobles est tres faible (quelques centiemes d'eV), alors que celle de Fe{alpha} est relativement elevee (+1,7 {+-} 0,8 eV). La chaleur de transport apparente de Sb dans Cu, mesuree par la technique de la couche mince, est (-0.21 {+-} 0.05 eV). L'influence de la densite de sources et puits de lacunes sur le flux de lacunes observe est determinee en appliquant le formalisme de la thermodynamique des processus irreversibles; si la distance moyenne entre sources et puits excede une certaine valeur limite, le flux de lacunes devient pratiquement nul. La contribution des chocs electrons-defaut (q*e) et phonons-defaut (q*p) a la chaleur de transport,est calcul theoriquement a

  19. Contribution to the theoretical study of the thermal diffusion of point defects in metals; Contribution a l'etude theorique et experimentale de la thermodiffusion de defauts ponctuels dans les metaux

    Energy Technology Data Exchange (ETDEWEB)

    Gerl, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1968-01-01

    An experimental study of diffusion under a thermal gradient shows that the heat of transport Q-bar* for self-diffusion in the noble metals is very low (a few hundredths of I eV) and relatively large in Fe{alpha} (+ 1,7 {+-} 0,8 eV). The apparent heat of transport of Sb in Cu, measured by the 'thin layer technique' is -0.21 {+-}0,05 eV.The influence of the density of sources and sinks of vacancies on the observed vacancy flux is determined by a calculation involving the thermodynamics of irreversible processes; when the mean distance between sources and sinks is larger than a certain limiting value, the vacancy flux vanishes.The contribution to the heat of transport of electron-defect (q*e) and phonon-defect (q*p) collisions is calculated using a semi-classical approach and by a quantum mechanical method; q*e is related to the resistivity {delta} -{rho}{sub d} and to the thermoelectric power of the defect at its stable position and at its saddle-point. A relation between q*e and the effective valency Z* of the defect allows a determination of {delta}{sub {rho}}{sub d} at the saddle-point. Numerical values of q*e are given for some impurities in noble metals. (author) [French] L'etude experimentale de la diffusion sous gradient de temperature montre que la chaleur de transport d'autodiffusion des metaux nobles est tres faible (quelques centiemes d'eV), alors que celle de Fe{alpha} est relativement elevee (+1,7 {+-} 0,8 eV). La chaleur de transport apparente de Sb dans Cu, mesuree par la technique de la couche mince, est (-0.21 {+-} 0.05 eV). L'influence de la densite de sources et puits de lacunes sur le flux de lacunes observe est determinee en appliquant le formalisme de la thermodynamique des processus irreversibles; si la distance moyenne entre sources et puits excede une certaine valeur limite, le flux de lacunes devient pratiquement nul. La contribution des chocs electrons-defaut (q*e) et phonons-defaut (q*p) a la chaleur de

  20. ALGORITMA RC4 DALAM PROTEKSI TRANSMISI DAN HASIL QUERY UNTUK ORDBMS POSTGRESQL

    Directory of Open Access Journals (Sweden)

    Yuri Ariyanto

    2009-01-01

    Full Text Available In this research will be worked through about how cryptography RC4's algorithm implementation in protection to query result and of query, security by encryption and descryption up to both is in network. Implementation of this research which is build software in client that function access databases that is placed by the side of server. Software that building to have facility for encryption and descryption query result and of query that is sent from client goes to server and. transmission query result and of query can secure its security. Well guaranted transmission security him of query result and of query can be told to succeed if success software can encryption query result and of query which transmission so that in the event of scanning to both, scanning will not understand data content. Conclusion of this research that is woke up software succeed encryption query and result of query which transmission between application of client and of server databases. Abstract in Bahasa Indonesia: Pada penelitian ini dibahas mengenai bagaimana mengimplementasikan algoritma kriptografi RC4 dalam proteksi terhadap query dan hasil query, pengamanan dilakukan dengan cara melakukan enkripsi dan dekripsi selama keduanya berada di dalam jaringan. Pengimplementasian dari penelitian ini yaitu membangun sebuah software yang akan diletakkan di sisi client yang berfungsi mengakses database yang diletakkan di sisi server. Software yang dibangun memiliki fasilitas untuk mengenkripsi dan mendektipsi query dan hasil query yang dikirimkan dari client ke server dan juga sebaliknya. Dengan demikian tramsmisi query dan hasil query dapat terjamin keamanannya.Terjaminnya keamanan transmisi query dan hasil query dapat dikatakan berhasil jika software berhasil mengenkripsi query dan hasil query yang ditransmisikan sehingga apabila terjadi penyadapan terhadap keduanya, penyadap tidak akan mengerti isi data tersebut. Kesimpulan dari penelitian ini yaitu software yang dibangun

  1. Factors and uncertainties in the profitability of using nuclear energy in desalination of water; Facteurs et incertitudes de la rentabilite du recours a l'energie nucleaire dans le dessalement des eaux

    Energy Technology Data Exchange (ETDEWEB)

    Thiriet, L; Lievre, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

    1969-07-01

    One of the economic advantages of nuclear energy consists of the small proportional element in its cost structure. Economies of scale favour the nuclear station as compared with the conventional thermal one, and when the demand for electricity and heat, in particular for desalination, are sufficient, nuclear energy may, subject to certain conditions, prove advantageous. The object of this paper is to discuss the validity of the conclusions reached according to the hypotheses adopted. In the first part, the different kind of uncertainties connected with technical, economic and financial data (the various transmission coefficients, the life of equipment according to the choice of materials, changes in prices, the form of price functions and interest rates), and with the various constraints, are examined and discussed. In the second part the uncertainties connected with the method of optimisation used and the criterion of selection adopted are examined and discussed. It is shown thereby that it is usually extremely difficult to assume absolutely the competitiveness, or conversely the non-competitiveness, of using nuclear energy in the desalination of water, and that a large number of aspects have to be carefully examined. (author) [French] On sait que l'un des avantages economiques de l'energie nucleaire reside dans la faible part proportionnelle dans la structure de son cout. Les economies d'echelle favorisent le nucleaire par rapport au thermique classique, et lorsque les demandes d'electricite et de chaleur, notamment pour le dessalement, sont suffisantes on peut envisager favorablement, sous certaines hypotheses, le recours a l'energie nucleaire. L'objet de cette communication est de discuter la validite des conclusions auxquelles on parvient selon les hypotheses envisagees. Dans une premiere partie, on etudie et on discute les differentes sortes d'incertitudes, liees aux donnees techniques, economiques et financieres (les divers coefficients de transmission, les

  2. Sense of place and place identity: review of neuroscientific evidence.

    Science.gov (United States)

    Lengen, Charis; Kistemann, Thomas

    2012-09-01

    The aim of this review is to bring the phenomenological sense of place approach together with current results from neuroscience. We searched in neuroscientific literature for ten dimensions which were beforehand identified to be important in a phenomenological sense of place/place identity model: behaviour, body, emotion, attention, perception, memory, orientation, spirituality, meaning/value and culture/sociality. Neuroscience has identified many neurobiological correlates of phenomenological observations concerning sense of place. The human brain comprises specific and specialised structures and processes to perceive, memorise, link, assess and use spatial information. Specific parts (hippocampus, entorhinal, parahippocampal and parietal cortex), subregions (parahippocampal place area, lingual landmark area), and cells (place cells, grid cells, border cells, head direction cells) have been identified, their specific function could be understood and their interaction traced. Neuroscience has provided evidence that place constitutes a distinct dimension in neuronal processing. This reinforces the phenomenological argumentation of human geography and environmental psychology. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. PENDUDUK DAN HUBUNGAN ANTARETNIS DI KOTA SURABAYA PADA MASA KOLONIAL

    Directory of Open Access Journals (Sweden)

    Purnawan Basundoro

    2012-01-01

    Full Text Available Relation among ethnics in Indonesian colonial city, especially relation between European and local citizen are unique. In many causes, their interaction is relation between oppressor and the oppressed. Sometimes, it oppresses the peoples. Nevertheless, in the other time and place, their relation based on spirit and motivation of humanity, that is social relationship without racial and political sentiment. In the relation between European as a chief and the inlanders’ as a subordinate, the relation has not judge by race difference, but evaluate by social stratification. This relation happened in the different context depend on situation and condition. It indicates that relation among peoples always based humanity, that human constantly need the other else.Key words: ethnics, Surabaya, colonial Hubungan antar etnik di kota-kota kolonial di Indonesia, terutama hubungan antara orang-orang kulit putih Eropa dengan penduduk lokal cukup unik. Dalam banyak kasus hubungan mereka murni dalam kerangka hubungan antara penjajah dan yang terjajah. Hubungan semacam ini kadang-kadang sangat menindas bagi yang terjajah. Pada waktu dan tempat yang berbeda hubungan mereka sering kali juga dilandasai oleh semangat dan motivasi kemanusiaan, yaitu hubungan yang murni berdasarkan status sosial tanpa dilandasi sentimen politik dan rasial. Jika hubungan tersebut terjalin antara majikan yang Eropa dan buruh yang Bumiputera, maka baik-buruknya hubungan tersebut hanya bisa dinilai dari kelas sosial mereka yang berbeda, bukan karena perbedaan ras. Hubungan semacam itu bisa terjalin pada konteks yang berbeda-beda tergantung dengan situasi dan kondisi. Kata kunci: etnis, Surabaya, kolonial  

  4. GAMBARAN JENIS DAN JUMLAH KONSUMSI FAST FOOD DAN SOFT DRINK PADA MAHASISWA OBESITAS DI UNIVERSITAS HASANUDDIN

    OpenAIRE

    Suryanti, Rut; Jafar, Nurhaedar; Syam, Aminuddin

    2013-01-01

    Konsumsi fast food dan soft drink dapat menyebabkan kelebihan berat badan dan obesitas.Penelitian ini bertujuan untuk mengetahui gambaran jenis dan jumlah zat gizi makro dari konsumsi fast food dan soft drink pada mahasiswa yang obesitas.Jenis penelitian adalah deskriptif, dilaksanakan pada bulan Mei-Juni 2013 di Universitas Hasanuddin dengan jumlah responden 60 orang. Instrument penelitian adalah kuesioner identitas diri dan food frekuensiSemiQuantitatif fast food dan soft drink, food pictur...

  5. PERSEPSI DAN TRANSFORMASI VISI DAN MISI PADA CIVITAS AKADEMIKA STAIN PEKALONGAN

    Directory of Open Access Journals (Sweden)

    Imam Khanafi

    2013-05-01

    Full Text Available Penelitian ini mengukur tingkat persepsi visi dan misi civitas akademika STAIN Pekalongan, dan mengukur juga tingkat implementasi sebagai transformasi visi misi tersebut serta menemukan hubungan antara persepsi dengan implementasinya. Kajian ini memiliki signifikan yang strategis dalam konteks manajemen dan pengembangan Pendidikan di STAIN Pekalongan dan lembaga pendidikan lainnya. Hal ini karena posisi visi dan misi sebagai kerangka acuan (frame of reference yang mengarahkan dan menjelaskan kepada keseluruh unsur civitas akademika dalam setiap program kerjanya.

  6. Introduction to Interregional Place Branding

    DEFF Research Database (Denmark)

    Zenker, Sebastian; Jacobsen, Björn P.

    2015-01-01

    Place branding is an inherently difficult venture, since places are complex systems of geographical abstractions, each one understood in relation and contrast to other geographical entities. Even at the smallest size – a district, town, or city – a place is quite complex, but it becomes even more...

  7. Heat transfer tests conducted on full-scale model, to investigate cooling conditions of EL.3 experimental reactor; Essais de transmission de chaleur sur maquette pour l'etude du refroidissement de la pile EL 3

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Butzbach, M; Domenjoud, M [Alsthom, 75 - Paris (France); Bousquet, M [Chantiers de l' Atlantique (France); Braudeau, M; Milliat, M [Electricite de France (EDF), 75 - Paris (France)

    1958-07-01

    For such high heat flux density as is released in the channels of EL3 reactor (2.10{sup 6} kcal/m{sup 2}h on the hottest point) cooling conditions have proved to be satisfactory, that is free from nucleate boiling. The arrangements provided for these tests and the technique used for measurements (of temperature particularly) are specified. Two fields have been investigated: in the former (forced convection without nucleate boiling) a good agreement is found with Colburn's formula. The influence of the ratio L/D is pointed out. The latter field is of forced convection with beginning of nucleate boiling; there the observed raise of the transfer coefficient has been shown occurring with some delay. (author)Fren. [French] A la valeur elevee prevue pour la densite de flux de chaleur (2.10{sup 6} kcal/m{sup 2}h au point le plus chaud) il est verifie que le refroidissement de la pile s'effectue normalement (sans ebullition de paroi). Les essais sont menes sur la maquette grandeur nature d'un canal d'EL3. Les dispositions relatives a la conduite des essais et a la technique des mesures (de temperature en particulier) sont precisees. Deux domaines sont etudies; pour t{sub p} < T{sub sat} (convection forcee sans ebullition de paroi) on constate un bon accord avec la formule de Colburn, avec toutefois l'influence du rapport L/D. Pour t{sub p} < T{sub sat} (debut d'ebullition) l'augmentation prevue du coefficient de transmission presente un certain retard. (auteur)

  8. Les corps étrangers de l'oesophage : place de l'endoscopie au tube ...

    African Journals Online (AJOL)

    Objectif : Déterminer la place de l'endoscopie au tube rigide dans la prise en charge des CEO. Méthodologie : Il s'agit d'une étude prospective menée chez des patients reçus pour corps étrangers de l'oesophage et qui ont été pris en charge dans le service ; du 1er janvier 2004 au 31 décembre 2008 .78 patients ont été ...

  9. No place for their children:

    DEFF Research Database (Denmark)

    Nielsen, Helene Pristed

    2018-01-01

    Drawing on a combination of theories on gender and place and work after globalisation, this article addresses how gender, place, employment-related mobility and flexible work conditions affect generational ties to place. Interviews with persons whose working life histories (by choice or circumsta......Drawing on a combination of theories on gender and place and work after globalisation, this article addresses how gender, place, employment-related mobility and flexible work conditions affect generational ties to place. Interviews with persons whose working life histories (by choice...... or circumstance) include flexible hours and high levels of mobility reveal explicit hopes that their children will have more stable working lives – and expectations that this will mean that they shall have to leave the local area. The article documents how the local place is an important component...

  10. Perancangan dan Analisis Redistribution Routing Protocol OSPF dan EIGRP

    Directory of Open Access Journals (Sweden)

    DWI ARYANTA

    2016-02-01

    Full Text Available Abstrak OSPF (Open Shortest Path First dan EIGRP (Enhanced Interior Gateway Routing Protocol adalah dua routing protokol yang banyak digunakan dalam jaringan komputer. Perbedaan karakteristik antar routing protokol menimbulkan masalah dalam pengiriman paket data. Teknik redistribution adalah solusi untuk melakukan komunikasi antar routing protokol. Dengan menggunakan software Cisco Packet Tracer 5.3 pada penelitian ini dibuat simulasi OSPF dan EIGRP yang dihubungkan oleh teknik redistribution, kemudian dibandingkan kualitasnya dengan single routing protokol EIGRP dan OSPF. Parameter pengujian dalam penelitian ini adalah nilai time delay dan trace route. Nilai trace route berdasarkan perhitungan langsung cost dan metric dibandingkan dengan hasil simulasi. Hasilnya dapat dilakukan proses redistribution OSPF dan EIGRP. Nilai delay redistribution lebih baik 1% dibanding OSPF dan 2-3% di bawah EIGRP tergantung kepadatan traffic. Dalam perhitungan trace route redistribution dilakukan 2 perhitungan, yaitu cost untuk area OSPF dan metric pada area EIGRP. Pengambilan jalur utama dan alternatif pengiriman paket berdasarkan nilai cost dan metric yang terkecil, hal ini terbukti berdasarkan perhitungan dan simulasi. Kata kunci: OSPF, EIGRP, Redistribution, Delay, Cost, Metric. Abstract OSPF (Open Shortest Path First and EIGRP (Enhanced Interior Gateway Routing Protocol are two routing protocols are widely used in computer networks. Differences between the characteristics of routing protocols pose a problem in the delivery of data packets. Redistribution technique is the solution for communication between routing protocols. By using the software Cisco Packet Tracer 5.3 in this study were made simulating OSPF and EIGRP redistribution linked by technique, then compared its quality with a single EIGRP and OSPF routing protocols. Testing parameters in this study is the value of the time delay and trace route. Value trace route based on direct calculation of cost

  11. Perlakuan Pemerintah Myanmar terhadap Minoritas Muslim Rohingya Perspektif Sejarah dan Hukum Internasional

    Directory of Open Access Journals (Sweden)

    Jawahir Thontowi

    2013-04-01

    Full Text Available Penelitian ini didasarkan pada permasalahan mengapa minoritas Muslim Rohingya diabaikan hak-hak dasarnya, dan upaya apakah yang harus dilakukan secara hukum internasional agar genosida dan kebijakan diskriminatif dapat dicegah di Myanmar. Hasil penelitian menyimpulkan bahwa kebijakan politik dan hukum Pemerintahan Myanmar telah melanggar ketentuan Konvensi tentang diskriminasi, bukan saja dibuktikan melalui fakta minoritas Muslim Rohingya tidak memiliki kewarganegaraan, tetapi juga aparat keamanan negara dan penduduk mayoritas Budha telah melakukan genosida dan massacre, serta pengusiran lainnya. Untuk mencegah kelangsungan praktek kejahatan genosida tersebut di Myanmar, bantuan kemanusiaan dan intervensi kemanusiaan dan penghukuman secara diplomatis oleh negara-negara Asean sangat diperlukan. This research is based on the following problematics, why Moslem minorities of Rohingya are neglected their basic rights, and what efforts must be made in according to international law in order that genocide and discrimination do not occur again in Myanmar government. This research has concluded that The Myanmar government has violated international law such as violent action and expulsion continuesly take place against Rohingya minority Moslem. It is important to urge for any state and political entity to take necessary action. In order to stop violent action occurs in Rohingya’s humanitarian intervention is important to take into account. But because of an uneasy decission to be made it is important to propose an independent fact finding team, and need countries to impose diplomatic sanctions.

  12. PRINSIP-PRINSIP DASAR EKONOMI ISLAM DAN PENGARUH TERHADAP PENETAPAN STANDAR AKUNTANSI

    Directory of Open Access Journals (Sweden)

    Koenta Adji Koerniawan

    2012-02-01

    Full Text Available Ekonomi islam merupakan suatu hal yang harus diimplementasikan dalam kehidupan bisnis. Tidak ada keraguan sebagai mayoritas pemeluk Islam untuk melaksanakan konsep-konsep yang didasarkan pada Al-Qur’an dan Al-Hadist. Dalam pandangan Islam, hukum berasal dari Tuhan (Allah dan manusia hanya bisa mendaftar dan memperluasnya untuk situasi yang berbeda. In the west, laws are passed to accommodate existing situations while, in the Islamic view, existing situations must be transformed to conform to Divine Law. Di barat, hukum dilewatkan untuk mengakomodasi situasi yang ada sementara, dalam pandangan Islam, situasi yang ada harus berubah menjadi sesuai dengan Hukum Ilahi. Singkatnya, tanpa aplikasi pengaturan Islami'ah Syariat Islam Standar Akuntansi tidak mungkin. Elements which should be considered include: Islamic economy elements the most important of which is social justice through application of prohibition of riba, zakat, and Islamic ethics. Elemen yang harus dipertimbangkan mencakup: elemen-elemen ekonomi Islam yang paling penting yang adalah keadilan sosial melalui penerapan larangan riba, zakat, dan etika Islam. Other factors such as Environmental and International elements which influence Muslims community and adoption of these elements are possible based on Ijtihad through application of "Time" and "Place". Faktor-faktor lain seperti dan Internasional elemen Lingkungan yang mempengaruhi masyarakat Muslim dan adopsi dari unsur-unsur yang mungkin didasarkan pada ijtihad melalui penerapan "Waktu" dan "Tempat".

  13. Reframing place promotion, place marketing, and place branding - moving beyond conceptual confusion

    NARCIS (Netherlands)

    Boisen, Martin; Terlouw, Kees; Groote, Peter; Couwenberg, Oscar

    2017-01-01

    The literature and practice of place promotion, place marketing and place branding lack a common understanding of what these three concepts mean and through what kind of policies they can be implemented. Although scholars have provided several theoretical frameworks and definitions, both scholars

  14. Les facteurs influançant les compétences des infirmiers et des infirmières en matière de soins spirituels dans un contexte de soins somatiques: une revue de littérature étoffée

    OpenAIRE

    Bédaton, Stéphanie; Hayoz, Marine; Schenevey Perroulaz, Eliane

    2013-01-01

    Les facteurs influençant les compétences des infirmiers et des infirmières en matière de soins spirituels dans un contexte de soins somatiques. Objectif : identifier la place de la spiritualité dans les soins et identifier les facteurs aidants et les obstacles qui influencent les compétences des infirmières dans le domaine de la spiritualité dans un contexte de soins somatiques.

  15. Pengaruh Perebusan, Penggaraman Dan Penjemuran Pada Udang Dan Cumi Terhadap Pembentukan 7 Ketokolesterol

    Directory of Open Access Journals (Sweden)

    Rudi Riyanto

    2007-12-01

    Full Text Available Penelitian pengaruh perebusan, penggaraman dan penjemuran pada udang dan cumi terhadap pembentukan 7‑ketokolesterol telah dilakukan. Dalam penelitian ini, udang dan cumi masing ­masing dibagi dalam dua kelompok. Pada kelompok pertama diberikan perlakuan perebusan dalam air, dan pada kelompok kedua diberikan perlakuan perebusan dalam air garam (3% air garam untuk udang dan 20% air garam untuk cumi. Setelah perebusan, dilakukan pengeringan di bawah matahari (udang dikupas dahulu sebelum dijemur. Pengambilan sampel dilakukan saat kondisi segar, setelah direbus dan setelah dijemur. Pengamatan dilakukan terhadap kandungan 7‑ketokolesterol, kolesterol, nilai TBA, dan kadar air. Hasil penelitian menunjukkan bahwa perebusan, penggaraman dan penjemuran berpengaruh terhadap pembentukan 7‑ketokolesterol sampai konsentrasi 20,82 ppm pada udang dan 15,05 ppm pada cumi sebagai konsentrasi tertinggi produk hasil oksidasi kolesterol yang terbentuk. Penelitian ini dapat dijadikan bukti bahwa pemanasan (perebusan dan penjemuran, serta penggaraman berpengaruh dalam proses oksidasi kolesterol pada udang dan cumi.

  16. The place of ionizing radiation in the cancer genesis; La place des rayonnements ionisants dans la genese des cancers

    Energy Technology Data Exchange (ETDEWEB)

    Simon, J. [Societe Francaise d' Energie Nucleaire, 75 - Paris (France)

    2009-12-15

    Two different fields are considered: the field of high radiation doses (over 1 Sv), the contribution of ionizing radiation in the carcinogenesis is doubtless and the linear dose-effect relationship is unshakable. but this high doses area is rare ( major accident of civil nuclear, radiotherapy, war with use of nuclear weapon) and escapes to usual standards. The field of low dose irradiation (inferior to 100 MSv) we cannot assure the absence of carcinogen risk of ionizing radiation. We can tell that this risk is very low, very inferior to 5% by sievert accepted by the ICRP in conformance with the precautionary principle. In any case, very inferior to the risk in relation with the big causes of cancer that are addiction to smoking, (30% of cancers), food (30% of cancers), chronic diseases (11% of cancers) and hormonal processes (10% of cancers). (N.C.)

  17. CORPORATE IDENTITY SEJARAH DAN APLIKASINYA

    Directory of Open Access Journals (Sweden)

    Christine Suharto Cenadi

    1999-01-01

    Full Text Available In the recent globalization era%2C and the developed market%2C many companies compete to attract consumers to buy their products. One of the keys to compete and survive in this developing market is by creating an image and graphic identity. This paper will discuss about corporate identity%2C image%2C its purpose and applications. Abstract in Bahasa Indonesia : Dalam era globalisasi dewasa ini%2C dan dengan berkembangnya pasar (market%2C banyak perusahaan bersaing untuk menarik perhatian konsumen untuk membeli produknya. Salah satu cara untuk bersaing dan dapat bertahan di dalam pasar yang terus berkembang ini adalah dengan menciptakan suatu image dan identitas graphic. Tulisan ini akan membahas tentang corporate identity%2C image%2C fungsi dan aplikasinya

  18. IDENTIFIKASI DAN EVALUASI AKSES PUBLIK DAN OPEN SPACE DI KAWASAN SENG HIE PONTIANAK

    Directory of Open Access Journals (Sweden)

    Bontor Jumaylinda Br. Gultom

    2016-09-01

    Seng Hie area has a unique character that gives the image of the city of Pontianak. This area has the potential to be developed. This area already has the appeal of the inherent function, namely trade. This makes this area very easily become a magnet to invite more people to visit. REFERENCES Breen, Ann dan Dick Rigby. (1994. Waterfront, Cities Reclaim Their Edge. Mc.Graw Hill. New York Breen, Ann dan Dick Rigby. (1996. The New Waterfront: A Worldwide Urban Success Story. Mc.Graw Hill. New York Department of City Planning, Waterfront Urban Design Technical Advisory Committee. (1997. The Port of San Francisco Waterfront Design & Access: An Element of the Waterfront Land Use Plan, Port of San Francisco. San Francisco. Garnham, Harry Launce. (1985 Maintaining the Spirit of Place: a Process for the preservation of Town Character. PDA Publisher Corp. Madison Garnham. H. L. (1976. Maintaining the Spirit of Place: A Guidebook for Citizen/professional Participation in the Preservation and Enhancement of Small Texas Towns.  A & M University Printing. Texas. Jumaylinda. (2007. Kualitas Visual Fasad Bangunan Komersil Seng Hie. Thesis. UGM. Yogyakarta Maryono, Agus; Parikesit, Danang. (2003. Transportasi Sungai Mulai Ditinggalkan. Kompas, 01 Mei 2003 Wrenn, Douglas M, dkk. (1983. Urban Waterfront Development. Urban Land Institute. Michigan

  19. Profil Sensori dan Nilai Gizi Beberapa Jenis Ikan Patin dan Hibrid Nasutus

    Directory of Open Access Journals (Sweden)

    Theresia Dwi Suryaningrum

    2010-11-01

    Full Text Available Penelitian mengenai profil sensori dan nilai gizi filet patin Siam (Pangasius hypopthalmus, Jambal (Pangasius djambal Bleeker, Pasupati, Nasutus serta hasil silangan Siam dan Nasutus (hibrid Nasutus telah dilakukan. Analisis sensori dilakukan dengan uji pembeda menyeluruh, uji pembeda atribut, uji kesukaan, dan uji rangking. Pengamatan lainnya dilakukan terhadap edible portion dan nilai gizi (proksimat dan profil asam amino. Hasil penelitian menunjukkan bahwa filet patin hibrid Nasutus lebih memiliki kesamaan warna dengan filet patin Nasutus daripada filet patin Siam. W arna daging filet patin hibrid Nasutus berbeda nyata dengan induknya yaitu patin Nasutus dan patin Siam. Panelis lebih menyukai warna filet patin hibrid Nasutus dibandingkan dengan patin Pasupati. Patin hibrid Nasutus mempunyai tekstur yang berbeda nyata dengan Nasutus dan Jambal yang kompak dan padat, tetapi mempunyai kesamaan dengan patin Siam dan Pasupati yang agak kompak dan agak padat. Berdasarkan intensitas warna, hasil uji pembeda atribut dan uji kesukaan, maka secara berturut-turut panelis menyukai filet patin Jambal, Nasutus, hibrid Nasutus, Pasupati, dan Siam. Hibrid Nasutus mempunyai edible portionpaling tinggi (49% dibandingkan dengan patin lainnya tetapi mempunyai kadar air, kadar lemak, dan kadar protein yang lebih rendah dan berbeda nyata dengan induknya (patin Siam dan Nasutus. Patin Siam mengandung asam amino esensial paling tinggi di antara berbagai jenis patin yang diteliti. Profil asam amino patin hibrid Nasutus, Jambal, Pasupati, dan Nasutus hampir sama, kecuali pada patin Siam yang mengandung glisin, leusin, isoleusin, histidin, serin, treonin, dan prolin yang lebih tinggi dibandingkan dengan patin lainnya

  20. MENGENALI GEJALA TINITUS DAN PENATALAKSANAANNYA

    Directory of Open Access Journals (Sweden)

    Dewi Purwita Agustini

    2016-05-01

    Full Text Available Telinga berdenging atau dikenal dalam bahasa medis sebagai tinitus, banyak dikeluhkan sebagai suatu bising atau bunyi yang muncul di kepala tanpa adanya rangsangan dari luar. Adapun keluhan yang dialami ini seperti bunyi mendengung, mendesis, menderu, atau berbagai variasi bunyi yang lain. Tinitus bukanlah penyakit atau sindroma, tapi hanya merupakan gejala yang mungkin berasal dari satu atau sejumlah kelainan. Sebetulnya suara yang terdengar oleh telinga tersebut belum tentu bersifat kelainan atau patologis. Jika orang sehat yang terbukti telinganya normal, berada dalam ruang kedap (anehoic chamber, maka ia akan dapat mendengar berbagai macam suara yang berasal dari berbagai organ tubuhnya sendiri yang memang bekerja setiap saat, contohnya: pernapasan, kontraksi jantung, dan aliran darah. Kenyataannya, dalam kehidupan sehari-hari, suasana yang memungkinkan suara fisiologis atau normal tersebut terdengar oleh seseorang sangat jarang tercipta dan bahkan dalam kamar yang sunyi di malam hari sekalipun. Hal ini dikarenakan, bunyi masking dari lingkungan dengan berintensitas bunyi sekitar 25 – 30 dB. Tinitus baru menjadi gejala jika suara organ tubuh intensitasnya melebihi bunyi masking lingkungan tadi. Tinitus kerap diderita terutama orang pada kelompok usia pertengahan dan usia tua. Menurut data statistic dari pusat kesehatan di Amerika, sekitar 32% orang dewasa pernah mengalami tinitus pada suatu saat tertentu dalam hidupnya, dan 6 % nya sangat menganggu dan cukup sulit disembuhkan. Di Inggris, 17% populasi juga memiliki masalah tinitus. Sayangnya di Indonesia belum ada data statistic yang memadai, namun berdasarkan pengalaman empiris, penderita tinitus cukup banyak dan sering ditemui di tempat praktek, klinik, maupun rumah sakit. Meski tinitus bukanlah keadaan yang membahayakan, munculnya gejala ini pada hampir kebanyakan orang sangat mengganggu dan sering mempengaruhi kualitas hidup dan pekerjaannya. Kata Kunci: Tinitus, berdenging, telinga

  1. Le CRDI dans les Philippines

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le CRDI appuie la recherche dans les. Philippines depuis 1972. Le travail qu'y ont accompli des universités et des instituts de recherche vigoureux et la participation active de la société civile ont entraîné d'importantes améliorations dans les domaines de l'agriculture, du suivi de la pauvreté et de la gestion des forêts.

  2. XML specifications DanRIS

    DEFF Research Database (Denmark)

    2009-01-01

    XML specifications for DanRIS (Danish Registration- og InformationsSystem), where the the aim is: Improved exchange of data Improved data processing Ensuring future access to all gathered data from the year 1999 until now......XML specifications for DanRIS (Danish Registration- og InformationsSystem), where the the aim is: Improved exchange of data Improved data processing Ensuring future access to all gathered data from the year 1999 until now...

  3. Ketergantungan Online Game Dan Penanganannya

    OpenAIRE

    Syahran, Ridwan

    2015-01-01

    Penelitian ini dimaksudkan untuk mengetahui perilaku yang ditimbulkan dari kecanduan bermaian online game pada siswa SMP Negeri 1 Palu yang meliputi faktor-faktor penyebab kecanduan, keadaan psikologis yang ditimbulkan dari kecanduan bermain online game dan dampak-dampak yang ditimbulkan dari kecanduan bermain online game.Pendekatan penelitian ini adalah penelitian kualitatif dengan jenis penelitian studi kasus dengan berdasarkan responden dan informan sebagai bahan sumber data. Dalam proses ...

  4. Adjusting to New Places: International Student Adjustment and Place Attachment

    Science.gov (United States)

    Terrazas-Carrillo, Elizabeth C.; Hong, Ji Y.; Pace, Terry M.

    2014-01-01

    Using data obtained from in-depth semistructured interviews, we examined international students' attachments to place in the local American Midwestern community where they have attended college for at least 2 years. The results of this study suggest that participants engage in a process of renegotiation of meanings attached to new places in ways…

  5. Census 2000 Places (cen00pl02)

    Data.gov (United States)

    California Natural Resource Agency — Census 2000 Place Names provides a seamless statewide GIS layer of places, including census designated places (CDP), consolidated cities, and incorporated places,...

  6. Faktor-Faktor Internal Penghambat Keefektifan Pelaksanaan Supervisi Bimbingan dan Konseling

    Directory of Open Access Journals (Sweden)

    Muhammad Khoiru Reza

    2015-12-01

    Full Text Available Penelitian ini dilaksanakan berdasarkan penelitian terdahulu disertai data hasil wawancara yang menunjukkan supervisi bimbingan dan konseling di SMA belum efektif. Tujuan penelitian ini adalah Memperoleh informasi secara objektif, mendalam, dan menyeluruh mengenai pengelolaan dan faktor internal penghambat keefektifan pelaksanaan supervisi bimbingan dan konseling di SMA Kesatrian 1 Semarang tahun 2014/2015.  Penelitian ini berjenis kualitatif deskriptif, dengan lokasi penelitian adalah SMA Kesatrian 1 Semarang. Subjek penelitian dan informan dalam penelitian ini adalah pengawas, guru bimbingan dan konseling, kepala sekolah SMA Kesatrian 1 Semarang, serta koordinator pengawas Kota Semarang. Teknik pengumpulan data yang digunakan dalam penelitian ini adalah metode wawancara, observasi, dokumentasi. Teknik analisis data yang digunakan adalah model interaktif oleh Miles dan Huberman. Pengujian kebasahan data menggunakan teknik triangulasi sumber dan metode. Hasil analisis data penelitian menunjukkan pengelolaan supervisi bimbingan dan konseling di SMA Kesatrian 1 Semarang pada bagian perencanaan, sekolah tidak terlibat sebagai sumber data penyusunan program, pada bagian pelaksanaan supervisi bersifat insidental, dan bagian evaluasi dan tindak lanjut belum terlaksana. Faktor internal penghambat pelaksanaan supervisi bimbingan dan konseling di SMA Kesatrian 1 Semarang adalah motivasi dan komitmen yang relatif rendah. This study is based on the previous study and interview result that shows ineffectiveness of guidance and counseling sepervision in high school. The purpose of this study is to collect information objectively, profoundly, and thoroughly about the management of guidance and counseling supervision at SMA Kesatrian 1 Semarang and the internal factors that obstruct it. This study belongs to descriptive qualitative study that took place in SMA Kesatrian 1 Semarang. The subject and informants of this study were the supervisor, the guidance and

  7. ENERGI DAN DAMPAKNYA TERHADAP LINGKUNGAN

    Directory of Open Access Journals (Sweden)

    I Made Astra

    2010-11-01

    Full Text Available Energi dapat berubah dari satu bentuk ke bentuk yang  lainnya, perubahannya sering mempengaruhi lingkungan dan udara yang kita hirup dengan berbagai cara. Energy kimia dalam bahan bakar fosil diubah menjadi energy panas, mekanik, atau listrik melalui pembakaran dan  ini sebagai penghasil polutan terbesar. Dan dengan demikian pembangkit listrik, kendaraan bermotor, dan kompor adalah penyebab utama terjadinya polusi udara.  Polutan yang dikeluarkan biasanya dikelompokan menjadi  hidrokarbon (HC, nitrogen oksida (NOx, dan  karbon monoksida (CO. Polutan yang dihasilkan pada pembakaran fosil merupakan faktor terbesar terjadinya asap, hujan asam,  pemanasan global dan perubahan iklim.   The conversion of energy from one form to another often affects the environment and the air we breath in many ways. Pollutants are emitted as the chemical energy in fossil fuels is converten to thermal, mechanical, or electrical energy via combustion, and thus power plants, motor vehicles, and even stoves take the blame for air pollution, and  the pollutants released by the vehicles are usually grouped as hydrocarbons (HC, nitrogen oxides (NOx, and carbon monoxide (CO. Pollutans emitted during the combustion of fossil fuels are responsible for smog, acid rain, and global warming and climate change.

  8. Isolasi dan Karakterisasi Ralstonia syzygii

    Directory of Open Access Journals (Sweden)

    Yanuar Danaatmadja

    2009-07-01

    Full Text Available Ralstonia syzygii is one of important pathogens of cloves. This study was aimed at obtaining pure culture of R. syzygi from diseased plant tissue samples. The acterium was isolated from infected clove plantations in Ungaran, Central Java. It had the ability to make clove seedlings show symptoms and then die 41 days after inoculation. The reisolated bacterium also showed its ability to kill clove seedlings after 17 days. The bacterium is gram negative, able to ultilize glucose, sucrose, maltose, mannitol, sorbitol, dulcitol, and glycerol, able to hydrolyze starch, grow well at 27oC, able to catalyze and release water and oxygen from hydrogen peroxyde (H2O2 and aerobically.   Ralstonia syzygii merupakan salah satu patogen penting pada tanaman cengkeh. Penelitian ini dilakukan untuk mendapakan isolat murni R syzygii dari jaringan tanaman terinfeksi. Bakteri diisolasi dari pertanaman cengkeh sakit yang berasal dari daerah Ungaran, Jawa Tengah. Bakteri menunjukkan kemampuan untuk menyebabkan bibit tanaman cangkeh sakit dan kemudian mati 41 hsi. Bakteri hasil reisolasi juga menunjukkan kemampuannya menyebabkan sakit dan kematian pada bibit tanaman cengkeh setelah 17 hsi. Bakteri yang diperoleh bersifat gram negatif, mampu memanfaatkan glukosa, sukrosa, maltosa, manitol, sorbitol, dulsitol, dan gliserol, mampu menghidrolisis pati, tumbuh baik pada suhu 27o C, mampu mengkatalisis dan melepaskan air dan oksigen dari hydrogen peroxide (H2O2 dan bersifat aerob.

  9. MANAJEMEN KEARSIPAN DINAMIS DI BIRO ADMINISTRASI UMUM AKADEMIK DAN KEMAHASISWAAN (BAUAK IAIN WALISONGO SEMARANG

    Directory of Open Access Journals (Sweden)

    Ahmad Farid Mubarrok

    2015-06-01

    Full Text Available Penelitian ini dilatarbelakangi oleh sebuah pemikiran bahwa masalah yang ditemukan di lapangan pada saat mengimplementasikan pedoman-pedoman dan kegiatan pengembangan arsip dan dokumen terhadap pengelolaan arsip di lingkungan BAUAK IAIN Walisongo Semarang fokus penelitian ini adalah bagaimana manajemen kearsipan dinamis di Biro Umum Akademik dan Kemahasiswaan (BAUAK IAIN Walisongo Semarang ? Hasil penelitian menunjukkan bahwa proses pencatatan kearsipan di BAUAK IAIN Walisongo Semarang menggunakan asas sentralisasi dan asas desentralisasi. Proses pengendalian arsip masih dalam tahap pemeliharaan arsip. Proses penyimpanan kearsipan menggunakan sistem abjad dan sistem pokok soal. Proses pemeliharaan kearsipan menggunakan rak dan lemari arsip dari bahan best ,dengan kata lain, pelaksanaan manajemen kearsipan di BAUAK IAIN Walisongo Semarang belum terlalu baik sesuai dengan standar yang efektif dan efisien. Proses pemindahan dan pemusnahan kearsipan perlu dilakukan karena ruang dan tempat menyimpan arsip serta umur arsip juga terbatas. This research is motivated by the idea that the problems found in the field during the implementation of guidelines and development activities archives and documents of the archives in environmental management BAUAK Walisongo IAIN Semarang focus of this research is how the dynamic records management in the General Bureau of Academic and Student Affairs (BAUAK IAIN Walisongo Semarang? The results showed that the process of recording archives in IAIN BAUAK Walisongo Semarang using the principle of centralization and decentralization. Process control is still in the stage of maintenance records archives. Archival storage process using the alphabetic system and subject the system. Archival preservation process using shelves and filing cabinets from the best materials, in other words, the implementation of records management in BAUAK IAIN Walisongo Semarang has not been too good in accordance with the standards of

  10. Penskalaan Butir Format Respons Pilihan dan Respons Bebas Berdasarkan Model Rasch dan Partial Credit

    OpenAIRE

    Eko Hariadi

    2007-01-01

    Penelitian melihat pengaruh jumlah parameter butir, kategori respons bebas (RB), pengaruh sampel terhadap akurasi estimasi parameter kemampuan untuk menghasilkan estimasi yang stabil dan pengaruh pembobotan butir RP dan butir RB terhadap kesalahan baku. Penelitian dalam dua tahap, simulasi menggunakan 30 kondisi dengan replikasi 50 dengan variabel panjang tes, jumlah kategori, dan jumlah parameter butir, dan analisis deskriptif, dilanjutkan penerapan penskalaan gabungan butir tipe res...

  11. Metode Sederhana dan Efektif untuk Penghitungan dan Visualisasi Tiga Dimensi (3D) Biofilm Vibriio Cholera

    OpenAIRE

    Kurniawan, Andi; Fadjar, Mohamad; Sukoso, Sukoso; Prihanto, Asep Awaludin

    2015-01-01

    Mikroorganisme yang mampu menghasilkan biofim menimbulkan masalah yang serius dalam bidang kesehatan dan pangan. Penelitian biofim bagi sebagian peneliti sangat identik dengan kerumitan proses penghitungan dan visualisasi penutupan permukaan substrat penempelan bakteri. Penelitian ini ditujukan untuk mengetahui efiiensi metode alternatif untuk menghitung dan memvisualisasikan biofimVibrio cholera. Pada penelitian ini beberapa faktor lingkungan seperti pH, suhu, dan kondisi kultur diujicobakan...

  12. Place prioritization for biodiversity content

    Indian Academy of Sciences (India)

    The prioritization of places on the basis of biodiversity content is part of any systematic biodiversity conservation planning process. The place prioritization procedure implemented in the ResNet software package is described. This procedure is primarily based on the principles of rarity and complementarity. Application of the ...

  13. Mapping and measuring place attachment

    DEFF Research Database (Denmark)

    Brown, Greg; Raymond, Christopher Mark; Corcoran, Jonathan

    2015-01-01

    The concept of place attachment has been studied extensively across multiple disciplines but only recently with empirical measurement using public participation GIS (PPGIS) and related crowd-sourcing mapping methods. This research trialed a spatially explicit method for identifying place attachme...

  14. Place leadership, governance and power

    Directory of Open Access Journals (Sweden)

    Sotarauta Markku

    2016-12-01

    Full Text Available There is an emerging consensus that place leadership is the missing piece in the local and regional development puzzle. In this context, leadership is a hidden form of agency, shadowed by such visible forms of influence as structures and formal institutions, as well as development programs and plans. This article argues that one of the most central issues in a study of place leadership is to analyse the relationships between governance, power and place leadership. The governance arrangements are undoubtedly important, as they dictate the kind of resources and positions provided to regional development work, and thus they also enable, as well as constrain, the many efforts of regional champions to exercise power in complex development processes. It is argued here that revealing how place leadership is enacted in different places and times would allow us to flesh out novel aspects about the eternal questions of how and why some places are able to adapt strategically to ever-changing social, economic and environmental circumstances while others fail to do so. Additionally, deeper investigations of place leadership would hopefully allow us to provide policymakers and practitioners with added insight on the ways to make regional development policies and practices not only more strategic but also effective. This paper elaborates the conceptual link between place leadership, governance and power.

  15. Improvement of heat transfer by the use of corrugated surfaces; Amelioration du transfert de chaleur par l'emploi de surfaces corruguees

    Energy Technology Data Exchange (ETDEWEB)

    Gargaud, J; Paumard, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    noyau corrugue chauffe electriquement a flux constant et un canal exterieur lisse. 2. des essais sur tubes corrugues interieurement, chauffes par une circulation d'eau exterieure et refroidis par un courant interne de CO{sub 2} sous pression. Le premier type d'essais necessite des sondages de vitesses et de temperatures dans le fluide afin d'obtenir un coefficient de frottement et un nombre de Margoulis caracteristiques de la surface corruguee. Par contre, ces coefficients sont fournis directement par le second type d'essais. Cette etude fait apparaitre le role et l'importance des divers parametres geometriques et aerodynamiques tels que la rugosite relative, le pas reduit (rapport du pas a la hauteur de corrugation) et le nombre de Reynolds. (auteurs)

  16. Purwarupa Sistem Integrasi Quadcopter dan Mobile Robot

    OpenAIRE

    Dharmawan, Andi; Lusiarta Putera, Christian Antonia

    2012-01-01

    AbstrakQuadcopter, juga dikenal sebagai quadrotor, adalah helikopter dengan empat motor yang dilengkapi dengan  empat buah propeller pada masing-masing motornya yang digunakan untuk terbang dan bermanuver. Pada quadcopter terdapat 3 variabel sudut yang menjadi element utama dalam pengendaliannya yaitu roll, pitch, dan yaw yang diperoleh dari penggabungan sensor accelerometer, gyroscope dan magnetometer dengan metode Direction Cosine Matrix. Pada sistem integrasi mobile robot dan quadcopter, d...

  17. Review Dendrimer : Definisi, Sintesis, Aplikasi Dan Prospektif

    OpenAIRE

    Rahmi, Dwinna

    2013-01-01

    Dendrimer merupakan makrostruktur monodisperse dengan banyak cabang yang homogen dan degree of branching (DB) 100%. Dua cara sintesis dendrimer yaitu convergent dan divergent dilakukan. Convergent dilakukan dengan reaksi kovalen antara dua dan lebih monomer. Divergent dimulai dengan pembentukan inti dilanjutkan dengan pembentukan cabang yang merupakan group fungsional yang aktif. Sejauh ini dendrimer sudah banyak diterapkan pada bidang farmasi yaitu drug delivery dan non farmasi pada proses i...

  18. Rancang Bangun Aplikasi Enkripsi dan Dekripsi Email Dengan Menggunakan Algoritma Advanced Encryption Standard Dan Knapsack

    Directory of Open Access Journals (Sweden)

    Timothy John Pattiasina

    2014-07-01

    Full Text Available Advanced Encryption Standard (AES dan Knapsack adalah dua algoritma enkripsi simetris dan asimetris yang paling sering digunakan. Penelitian ini menganalisa kedua algoritma AES dan algoritma Knapsack. Prototipe aplikasi enkripsi email ini dirancang dengan menggabungkan karateristik algoritma AES dan Knapsack untuk memecahkan masalah keamanan email. Algoritma AES digunakan untuk mengenkripsi dan deskripsi email berupa teks atau file, sedangkan Algoritma Knapsack di gunakan untuk mengenkripsi kunci AES. Enkripsi hybrid yang diterapkan pada aplikasi bertujuan untuk menambah keamanan informasi dalam sebuah jaringan.

  19. MODEL PENELITIAN HUBUNGAN POLA PERMUKIMAN DAN KONFLIK ANTAR ETNIK

    Directory of Open Access Journals (Sweden)

    Emilya Kalsum

    2015-01-01

    that the integration process cannot occur. This study is to create a research model that can be used to investigate the effect of the settlement pattern to the conflict. It began with the definition of settlement pattern which includes three elements (place, content, network and seek the concept of social relationship. Social interaction process can produce two alternatives that are positive or negative. Negative alternative will bring inharmonic atmosphere which let to conflict. Inter-ethnic social relations also always accompanied by prejudices based on stereotype and ethnocentric attitudes; also due to different interests. Elements in settlement pattern was studied with its connection with social relations among its inhabitants. The approach taken was behavioral approach by the concept of behavior setting. The study resulted in a research model which combine settlement pattern as space for activity with social condition which is closely related to stereotype and ethnocentric attitudes as well as different interests REFERENCES Ahmadi, A. 1991. Masalah Carok Di Madura, Samsuri Ed., Madura II, Proyek Penelitian Madura, Depar-temen Pendidikan dan Kebudayaan RI. Malang: IKIP. Alqadrie, Syarif lbrahim. 1999. "Konflik Etnik di Ambon dan Sambas: Suatu Tinjauan Sosiologis”. Antropologi Indonesia. Th. XXIII, No. 58. Basset, Keith dan Short, John. 1978. Housing Residential Structure Alternatives Approaches' Ronhedge & Kegan Paul. London: Boston & Henley. Baum, Howeell S. 1998. “Ethical Behavior is Extraordinary. Behavior; It’s The Same As All Other Behavior. A Case Study In Community Planning”. APA Journal Autumn. Bernard, Jessie. 1973. Concencus, Conflict And Criminology. Unpub. PhD, School of Criminal Justice, State University Of N.Y at Albany. Broom, L., Selznick P. 1957. Sociology, Row. New York: Petterson & Co. Broom, L., Selznick P. dan Daroch, D.S. 1981. Sociology. New York: Harper International Edition. Cohen, Bruce J. 1992. Sosiologi Suatu Pengantar

  20. KORELASI ANTARA ISLAM DAN EKONOMI

    Directory of Open Access Journals (Sweden)

    Akmal Zainal Abidin

    2015-03-01

    Full Text Available CORELATION BETWEEN ISLAM AND ECONOMY. This paper aims to identifies about the correlation between economic and Islam. Islam is the perfect religion that governs all things in life, including the economy. This is evident with the concept of  well-being which is described in the al-Quran and Sunnah. Basically the goal of every human life is to prosper, although humans make sense of  well- being with a different perspective. Most understand economics assume that welfare is the welfare of  earthly material. But to make sense of well-being with the term al-Falah, is meaning holistic wellbeing and balance between material and spiritual dimensions. al-Quran and Sunnah have taught that the human being will be achieved if  living in balance between material and spiritual. This is because human life does not just stop in the life of this world, but there is still a second life that will be faced by humanity in the hereafter, and well-being will be achieved with the truth is that people can balance the needs of the world and the hereafter, and that is what is taught in Islamic economics. Keywords: Islam, Economy, Prosperity. Tulisan ini bertujuan untuk menjelasakn tentang korelasi antara ekonomi  dan  Islam.  Islam  adalah  agama  yang  sempurna  yang mengatur segala hal dalam kehidupan ini, termasuk juga ekonomi. Hal ini terbukti dengan konsep kesejahteraan yang dipaparkan dalam al-Quran dan Sunnah. Pada dasarnya tujuan hidup setiap manusia adalah untuk mencapai kesejahteraan, meskipun manusia memaknai kesejahteraan dengan perspektif  yang berbeda-beda. Sebagian besar paham ekonomi menganggap bahwa kesejahteraan adalah kesejahteraan material duniawi. Namun Islam memaknai kesejahteraan dengan istilah  Falah  yang  berarti  kesejahteraan  holistik  dan  seimbang antara dimensi material dan spiritual. Al-Quran dan Sunnah telah mengajarkan bahwa kesejahteraan akan tercapai jika manusia menjalani hidup secara seimbang antara material dan

  1. Karakteristik Dan Spektrum Manajemen Pendidikan Islam

    OpenAIRE

    Jannah, Siti Raudhatul

    2013-01-01

    Artikel ini mendiskusikan mengenai manajemen pendidikan Islam, karakteristik, dan spektrumnya. Karakteristik manajemen pendidikan Islam harus didasarkan pada al-Qur'an dan Hadits serta pemikiran rasional yang telah diuji validitasnya. Spektrum manajemen pendidikan Islam meliputi lingkup manajemen personalia pendidikan Islam, manajemen peserta didik pendidikan Islam, maanjemen kurikulum pendidikan Islam, manajemen keuangan pendidikan Islam, manajemen sarana dan prasarana pendidikan Islam, mana...

  2. PRODUKSI NANOFIBER DAN APLIKASINYA DALAM PENGOLAHAN AIR

    OpenAIRE

    Krisnandika, Vania Elita

    2017-01-01

    Abstrak Kebutuhan air meningkat seiring meningkatnya jumlah penduduk dan taraf kehidupan masyarakat. Pembangunan yang dilakukan secara terus-menerus dan sangat cepat di Indonesia mengakibatkan penurunan kualitas air permukaan. Teknologi membran merupakan salah satu teknologi pengolahan air yang menghasilkan produk dengan kualitas tinggi. Membran berstruktur nano, khususnya nanofiber, saat ini menjadi perhatian karena menjawab kebutuhan teknologi filtrasi yang efektif dan hemat biaya. Pr...

  3. DETEKSI DAN MANAJEMEN REFEEDING SYNDROME

    Directory of Open Access Journals (Sweden)

    Darmadi Darmadi

    2012-09-01

    Full Text Available AbstrakRefeeding syndrome (RFS dideskripsikan sebagai perubahan biokimiawi, manifestasi klinis dan komplikasi sebagai konsekuensi pemberian nutrisi pada pasien kurang gizi. Refeeding syndrome ini menyebabkan dampak buruk dan kematian. Sindroma ini lebih sering terjadi pada kelompok risiko. Refeeding syndrome merupakan suatu sindroma yang sering tak terdiagnosis oleh karena itu perlu peningkatan pengetahuan dan kesadaran dari tenaga medis untuk mengurangi morbiditas dan mortalitas dari RFS. Karena alasan tersebut ditulis tinjauan pustaka ini yang akan membahas mengenai patofisiologi, faktor risiko, manifestasi klinis, dan manajemennya.Kata kunci : refeeding syndrome, kurang gizi, hipofosfatemia, dukungan nutrisiAbstractRefeeding syndrome (RFS describel as biochemical changes, clinical manifestations, and complications that can occur as a consequence of feeding a malnourished individual. RFS can result in serious harm and death. RFS more commonly occurs in at-risk populations. Increased awareness amongst healthcare professionals is likely to reduce morbidity and mortality. This review examines the pathophysiology, risk factors, clinical manifestations, and management of RFS.Key word : refeeding syndrome, malnourished, hypophosphatemia, nutritional support

  4. Islam, Media, dan Politik : Sebuah Perdebatan dan Kontempelasi Nilai Berdemokrasi

    Directory of Open Access Journals (Sweden)

    Idil Akbar

    2016-10-01

    Full Text Available Infact, press or media is one of pilar democracy. Media in democracy is a public sphere to communi-cation and makes relation, and a same time as public arena to gain information. But, media also could not release from streotypes and tendency that usually bring of interest, either the owner or ideology. It is meaning media can not released from perspective distorsion, values bias and take a side. Media also effective to become propaganda instrument for a political interest and an ideology. It is seen like how media in US, for example, stereotype of Islam in discourses contradiction and glob-al interest opposition. Then, Islam dominantly identified as doctrine teaches radicalism, fundamen-talism and terorism. Thus, it is often be justification for US to operate the military mission in the name of democracy. Tak dipungkiri pers atau media menjadi salah satu pilar bagi demokrasi. Media dalam demokrasi adalah sebagai ruang bagi publik berkomunikasi dan berinteraksi, sekaligus sarana publik mem-peroleh informasi tentang banyak hal. Namun, media juga tak bisa dilepaskan dari stereotip dan kecenderungan-kecenderungan, yang biasanya membawa kepentingan, baik pemilik maupun ide-ologi. Media karenanya tak lepas dari distorsi perspektif, bias nilai dan berpihak. Media juga efektif menjadi alat propaganda bagi sebuah kepentingan politik dan ideologi, seperti bagaimana media di negara Amerika, misalnya, menstereotipkan Islam dalam analisis pertentangan wacana dan kepent-ingan global. Sehingga, dominan Islam diidentikkan dengan sematan sebagai ajaran yang mengajarkan radikalisme, fundamentalisme dan terorisme. Karenanya pula seringkali menjadi alasan pembenar bagi Amerika untuk menjalankan misi militer atas nama demokrasi.

  5. Musisi Sekuler dan Gerejawi

    Directory of Open Access Journals (Sweden)

    Benny Cristovel

    2007-12-01

    Full Text Available Menjadi seorang musisi tidak sekedar bermain musik atau menyanyi saja. Ada jenjang-jenjang yang akan dilewatidalam dunia musik, yang pada akhirnya setiap musisi dihadapkan kepada tanggung jawab dalam dunia tersebut. Di jaman ini, jika jenjang seorang musisi sudah tahap profesional, maka musik dan bisnis merupakan hal yang tidak terpisahkan. Jadi tidak heran jika ada banyak orang yang memimpikan untuk berkarier dalam bidang musik, bahkan telah men1adicita-cita sejak kecil.Jadi penting bagi musisi gerejawi benar-benar "mengkotakkan dirinya" terhadap persepsi yang dianut oleh musisi sekuler, bukan mencampurkannya. Hal ini sangat esensial, karena musisi gerejawi bukan melayani manusia melainkan oleh anugerah Tuhan dipercayakan pekerjaan ini. Dengan demikian pelayanan sebagai musisi gerejawi tidak tercemar oleh persepsi dari dunia musik sekuler. Selain itu musisi gerejawi dapat merefleksikan Tuhan yang disembahnya kepada dunia sekuler, karena tujuan dari semua yang dilakukannya adalah untuk kemuliaan nama Tuhan.

  6. Strategies for Aging in Place

    Directory of Open Access Journals (Sweden)

    Suzanne Dupuis-Blanchard

    2015-01-01

    Full Text Available For healthy and independent older adults, aging in place can be seen as identical to any other adult living at home. Little is known about how frail seniors, particularly those who speak a minority language, manage the challenges of aging in place. The present qualitative descriptive study explores the strategies that Canadian French-speaking seniors have put in place to counter their loss of independence and promote their ability to stay in their home. Semistructured individual interviews were conducted with 39 older adults and transcribed, followed by content analysis to identify common themes related to study objectives. Six themes emerged in response to strategies described for aging in place. Findings reveal the limited extent to which language issues were perceived as a barrier by participants. In conclusion, the results of this study provide us with fruitful insights to guide community nursing practice, future research, and public policy.

  7. An Austere Place of Refuge

    Czech Academy of Sciences Publication Activity Database

    Feinberg, Joseph Grim

    -, February 15 (2016), s. 1-8 Institutional support: RVO:67985955 Keywords : refugee crisis * neoliberalism * extreme right Subject RIV: AA - Philosophy ; Religion http://www.criticatac.ro/lefteast/an-austere-place-of-refuge/

  8. Finding Place in Higher Education: An Epistemological Analysis

    Directory of Open Access Journals (Sweden)

    Shelagh M. Crooks

    2017-04-01

    Full Text Available Though the topic of student transition into the culture and practices of higher education has been the subject of considerable investigation by scholars, the transition literature has been largely silent on the epistemological challenges that new students face in the context of the university classroom. The purpose of this paper is to look at student transition from this unique perspective. The paper reviews recent empirical research in the area of “personal epistemology,” which establishes the facts regarding what students actually believe about knowledge and knowing as they enter university. The paper also provides an analysis of the epistemological beliefs of university teachers, and the influence that these beliefs have on the teachers’ educational practice. A key issue discussed here is the conflict between students’ conception of knowledge (as certain and possessed by authorities and their teachers’ conception of knowledge (as something constructed through a process of evidential inquiry. Finally, the impact of this epistemological conflict on students’ ability to make sense out of, and find their place in, the new and different learning environment of the university is considered. Bien que le sujet de la transition des étudiants dans la culture et la pratique de l’enseignement supérieur ait fait l’objet de nombreuses analyses de la part de chercheurs universitaires, la documentation sur la transition est en grande partie muette sur les défis épistémologiques auxquels les nouveaux étudiants font face dans le contexte de la salle de classe universitaire. L’objectif de cet article est d’examiner la transition des étudiants à partir de cette perspective unique. Dans cet article, nous examinons la recherche empirique récente effectuée dans le domaine de « l’épistémologie personnelle », qui établit les faits en ce qui concerne ce que les étudiants pensent réellement concernant la connaissance et l

  9. The origin of the pictorial krater from the 'Mycenaean' tomb at Tel Dan

    International Nuclear Information System (INIS)

    Yellin, J.; Maeir, A.

    1992-01-01

    A Late Bronze Age Mycenaean pictorial krater, decorated with a chariot procession, from tomb 387 at Tel Dan, Israel, was examined by instrumental neutron activation analysis. The origin of the krater is placed in the Argolid, very likely in the region of Mycenae or Berbati. (author)

  10. The origin of the pictorial krater from the 'Mycenaean' tomb at Tel Dan

    Energy Technology Data Exchange (ETDEWEB)

    Yellin, J.; Maeir, A. (Hebrew Univ., Jerusalem (Israel). Inst. of Archaeology)

    1992-02-01

    A Late Bronze Age Mycenaean pictorial krater, decorated with a chariot procession, from tomb 387 at Tel Dan, Israel, was examined by instrumental neutron activation analysis. The origin of the krater is placed in the Argolid, very likely in the region of Mycenae or Berbati. (author).

  11. Communication course – places available

    CERN Multimedia

    2012-01-01

    Please note that there are some places available in the following communication course starting in November. For more information on the course, click on the course title, this will bring you to the training catalogue. You can then sign-up on line. For advice, you can contact Kerstin Fuhrmeister (70896) or kerstin.fuhrmeister@cern.ch Course Next session Duration Language Availability Gestion de temps 22 November 3 days French 8 places  

  12. PENGELOLAAN ZAKAT OLEH NEGARA DAN SWASTA Studi Efektifitas dan Efisiensi Pengelolaan Zakat Oleh BAZ Dan LAZ Kota Madiun

    Directory of Open Access Journals (Sweden)

    Atik Abidah

    2010-12-01

    Full Text Available Abstraks: Keberadaan lembaga zakat di Indonesia yang diakui oleh perundang-undangan ada dua, yaitu Badan Amil Zakat (BAZ dan Lembaga Amil Zakat (LAZ. BAZ adalah lembaga zakat yang dikelola oleh pemerintah, sedangkan LAZ adalah lembaga yang dikelola oleh masyarakat. Artikel ini merupakan merupakan hasil penelitian lapangan dengan menggunakan pendekatan kualitatif. Data digali langsung dari BAZ Kota Madiun dan LAZ dalam hal ini ada 2 lembaga, yaitu Lembaga Manajemen Infaq (LMI dan Baitul Maal Hidayatullah (BMH. Hasil penelitian BAZ lebih efektif dibanding LAZ, karena BAZ di bawah naungan Pemerintah Kota Madiun dan didukung dengan kebijakan dalam menjalankan progam kerjanya. Sedangkan pada LAZ (LMI dan BMH karena sifatnya mandiri, maka segala sesuatunya akan efektif jika mereka bekerja keras, dan itulah yang selama ini dilakukan oleh LMI dan BMH, sehingga sampai saat ini mereka masih eksis.

  13. INTERAKSI DAN HARMONI UMAT BERAGAMA

    Directory of Open Access Journals (Sweden)

    Joko Tri Haryanto

    2012-05-01

    Masyarakat Singkawang adalah masyarakat yang terdiri atas berbagai kelompok suku bangsa dan agama. Secara historis, masyarakat Singkawang mampu mem­pertahankan harmoni antar agama. Model interaksi sosial yang bersifat asosiatif tampaknya potensial untuk mendukung harmoni di dalam masyarakat. Ber­dasarkan paradigma fungsional-struktural, masyarakat diasumsikan sebagai sistem organik yang memiliki huungan antar bagiannya untuk mempertahankan masyarakat. Interaksi sosial di dalam masyarakat Singkawang dikembangkan melalui interaksi di dalam lingkup keluarga, lingkungan sekitar, aktifitas ekonomi, para pimpinan agama, dan hubungan di dalam lingkup budaya dan tradisi. Meskipun demikian, hubungan antar unsur masyarakat masih kosmopolitan, yang di dalamnya anggota masyarakat kurang aktif dalam mengembangkan harmoni masyarakat.

  14. ETIKA BISNIS AL-GHAZALI DAN ADAM SMITH DALAM PERSPEKTIF ILMU BISNIS DAN EKONOMI

    Directory of Open Access Journals (Sweden)

    AM. M. Hafidz MS.

    2013-05-01

    Full Text Available Penelitian ini adalah untuk mengeksplorasi: (1 pembangunan etika bisnis yang telah dirumuskan oleh al-Ghazali dan Adam Smith, (2 persamaan dan perbedaan antara dua etika bisnis pria, dan (3 relevansi bisnis mereka etika bisnis modern dunia dan ekonomi. Bisnis etika dibangun oleh al-Ghazali dan Smith di dataran praksis tidak jauh berbeda. Etika bisnis konstruksi dibangun oleh al-Ghazali didasarkan pada prinsip-prinsip seperti orientasi itikad baik tentang dunia dan akhirat, kejujuran, kepentingan pribadi dan social keseimbangan, dan perilaku / perbuatan yang tepat. Di sisi lain, etika bisnis konstruksi dibangun oleh Smith, berdasarkan keadilan, altruisme, keadilan dan liberal (kebebasan ekonomi. Baik etika bisnis yang diperkenalkan oleh kedua sangat relevan untuk menjadi digunakan sebagai bahan pokok acuan dalam etika bisnis modern.

  15. Pengembangan Sistem Otomatisasi AC dan Lampu Menggunakan Fuzzy dan Raspberry Pi

    Directory of Open Access Journals (Sweden)

    Rudy Ariyanto

    2017-11-01

    Full Text Available Otomatisasi AC dan lampu dilakukan untuk menghemat energi yang digunakan pada kehidupan sehari-hari. Dalam pengembangan otomatisasi AC dan lampu perlu menerapkan sebuah perangkat yang memiliki fungsi maksimal dengan harga yang minimal. Raspberry Pi merupakan perangkat atau modul dengan harga rendah yang mampu melakukan komunikasi wireless tanpa bantuan modul lain. Dalam pengembangan otomatisasi AC dan lampu juga diperlukan sebuah metode yang mampu melakukan kontrol terhadap nyala AC dan lampu. Penerapan metode fuzzy dapat dilakukan untuk menghimpun informasi keadaan ruang yang didapat dari sensor untuk menentukan nyala AC dan lampu secara otomatis. Oleh sebab itu pada penelitian ini mengusulkan pengembangan otomatisasi AC dan lampu menggunakan Raspberry Pi dan Fuzzy. Otomatisasi AC dan lampu menggunakan Raspberry Pi yang menerapkan metode Fuzzy dapat menghemat energi hingga 59,87% dalam hal lama waktu nyala AC dan 57,47% untuk lumenasi lampu

  16. Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway di Petshop "PetZone"

    Directory of Open Access Journals (Sweden)

    Siska Fadhilah Wati

    2013-09-01

    Full Text Available Dewasa ini teknologi informasi sangat membantu dalam dunia bisnis. Kemudahan yang ditawarkan akan menjaring lebih banyak konsumen. Namun, perusahan tingkat menengah seperti PetZone saat ini masih jarang yang menawarkan kemudahan berbelanja atau pemesanan layanan secara online. Oleh karena itu diperlukan sebuah sistem berbasis web di perusahaan PetZone yang dapat memudahkan pemilik dan karyawan dalam apenjualan, pelayanan, dan pemasaran, serta memudahkan pelanggan dalam jual-beli barang dan jasa. Atas dasar masalah tersebut dibangun Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway untuk menunjang proses bisnis yang ada. Sistem informasi dibangun menggunakan bahasa pemrograman PHP framework Codeigniter, javascript untuk tampilan yang dinamis, dan database MySQL. Proses pembuatan dan pengembangan Sistem Informasi Penjualan ini menggunakan metode air terjun. Metode air terjun meliputi kebutuhan pengguna, analisis, rancangan, implementasi dan pengujian. Pemodelan Sistem Informasi yang dibangun menggunakan metode berorientasi objek UML (Unified Modeling Language yang terdiri dari Use case  diagram, Class diagram dan Sequence diagram. Hasil pengujian Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway menunjukkan bahwa semua fitur yang terdapat baik dalam sistem informasi maupun SMS gateway dapat bekerja dengan baikdengan ratusan sample data, dan server SMS gateway dapat memproses lebih dari satu SMS secara bersamaan. Dalam perkembangan ke depannya nanti, Sistem Informasi Penjualan dan Pemesanan Layanan Berbasis Web dan SMS Gateway masih dapat dikembangkan lagi dengan menambah fitur-fitur pada SMS gateway sehingga lebih memudahkan konsumen.

  17. Patterns of place promotion, place marketing and/or place branding in Dutch municipalities

    NARCIS (Netherlands)

    Boisen, Martin; Groote, Peter; Terlouw, Kees; Couwenberg, Oscar

    This paper analyses the different degrees to which place promotion, marketing and branding policies are institutionalised, based on a relatively straightforward and generally applicable methodology in order to stimulate international comparative research in the field. A consensus has emerged over

  18. Efikasi Kendiri: Perbandingan Antara Islam dan Barat

    Directory of Open Access Journals (Sweden)

    Noornajihan, J.

    2014-12-01

    Full Text Available Terminologi efikasi kendiri (EK merupakan terminologi yang diperkenalkan dalam ilmu psikologi sekitar tahun 70-an. Namun, istilah ini masih kurang difahami oleh kebanyakan individu terutama mereka yang bukan berlatar belakangkan bidang psikologi. Oleh itu, satu keperluan hasil penulisan ini diketengahkan, memandangkan konsep ini penting dalam diri setiap individu bagi memacu kecemerlangan diri. Justeru, kertas kerja ini akan mengupas serba ringkas mengenai konsep EK dari perspektif Islam dan Barat, dengan melihat kepada beberapa titik persamaan dan perbezaan antara kedua-dua pandangan. Islam dan Barat bersetuju bahawa individu yang memiliki EK yang tinggi merupakan individu yang berfikiran positif, berani mengambil risiko dan tidak mudah berputus. Namun pandangan Islam terhadap konsep ini lebih luas, kerana Islam mengaitkan konsep ini dengan konsep tauhid uluhiyyah dan konsep manusia sebagai ahsan al-taqwim. Oleh demikian, EK dari perspektif Islam lebih bersifat kekal dan umum, di samping individu yang berefikasi tinggi menurut Islam ialah individu yang memiliki sifat sabar, syukur, redha dan redha.

  19. PERANCANGAN DAN PENGEMBANGAN PROTOTYPE SISTEM PARKIR

    Directory of Open Access Journals (Sweden)

    Indah Ayu Septriyaningrum

    2016-10-01

    Abstrak  Sistem parkir manual pada pelayanan parkir mall memerlukan pengelolaan dan pengembangan sistem yang lebih rumit dan jauh dari kata efisien. Informasi yang didapatkan pengelola parkir terkait kondisi parkir di lapangan setiap harinya masih kurang. Tujuan dari penelitian ini adalah merancang dan mengembangkan prototype sistem parkir. Metode pengembangan dan perancangan sistem pada penelitian ini adalah metode Waterfall. Hasil yang didapatkan adalah sistem ini dapat mendeteksi keberadaan mobil pada slot parkir yang tersedia dengan bantuan Intel Galileo Board Gen 2 sebagai kontroler, sensor LDR (Light Dependent Resistor dan sensor ultrasonik (PING sebagai alat bantu pendeteksi keberadaan mobil. Sistem dapat menampilkan aktifitas parkir pada aplikasi web seperti kondisi lahan parkir kosong, lahan terisi, waktu masuk, waktu keluar, lama parkir dan kapasitas parkir yang tersedia serta grafik pemakaian lahan parkir. Dapat disimpulkan bahwa perancangan dan pengembangan sistem berhasil diimplementasikan. Kata Kunci : Sistem parkir, waterfall, Intel Galileo Board Gen 2,sensor LDR (Light Dependent Resistor, sensor ultrasonik

  20. The Path Is Place: Skateboarding, Graffiti and Performances of Place

    Science.gov (United States)

    Ong, Adelina

    2016-01-01

    This article reflects on two performances of place involving graffiti and skateboarding: the first looks at a graffiti intervention by SKL0, an urban artist in Singapore, and the second examines the "Long Live Southbank" ("LLSB") campaign to resist the relocation of Southbank's Undercroft, an appropriated skate space in London.…

  1. Without Place, Is It Real?

    Directory of Open Access Journals (Sweden)

    Joseph F Donnermeyer

    2016-09-01

    Full Text Available This article reviews Matthews’ (2014 Realist Criminology as an opportunity to address larger shortcomings within critical criminology, which is the failure to develop an alternative theory of crime and place to the mainstream theories of social disorganisation and collective efficacy. It uses rural criminological work related to violence against women and substance use, production and trafficking to illustrate the importance of place for development of a realist criminology that can consider localised expressions of power and inequality, and the multiplicity of networks and roles by which people can simultaneously be involved in both conforming and deviant/criminal behaviours. The article also suggests that a critical theory of crime and place would be useful to the synthesis and re-interpretation of criminological literature that is either theory-less or lacks a critical perspective.

  2. Efektivitas Weblog dan Facebook Terintegrasi untuk Pembelajaran Virtual

    OpenAIRE

    Hartono

    2014-01-01

    Abstrak: Saat ini, banyak mahasiswa menghabiskan waktu mereka di internet. Mereka melakukan kegiatan seperti membuat blog, mengunduh, mengunggah, chatting, dan berinteraksi melalui facebook. Mahasiswa sekarang ini hidup dengan teknologi. Penelitian menunjukkan bahwa weblog dan facebook berpotensi mendukung belajar dan mengajar. Guru dan pendidik menggunakan kegiatan tersebut untuk meningkatkan kualitas belajar. Penelitian ini bertujuan untuk mengetahui efektivitas weblog dan facebook ketika d...

  3. Lõuka tuuliku restaureerimine / Dan Lukas

    Index Scriptorium Estoniae

    Lukas, Dan

    2005-01-01

    Hiiumaal Pühalepa vallas Vahtrepa külas Lõuka talu maadel asuva pukktuuliku ajaloost, restaureerimise käigust. Teostus: Dan Lukas. Muinsuskaitseline järelevalve: Tõnu Sepp, tema kommentaar. Ill.:pukktuuliku lõiked ja korruste plaanid, 7 värv. fotot

  4. Internal Control: Peran Dan Perkembangannya

    OpenAIRE

    Murtin, Alek

    2000-01-01

    Perhatian terhadap pentingnya internal control dalam organisasi berjalan dari waktu ke waktu untuk meningkatkan fungsi internal control yang disesuaikan dengan perkembangan lingkungan organisasi, dimulai dengan adanya internal check, kemudian internal control system, internal control structure dan terakhir adalah internal control-integrated framework. Internal control system sempat berkembang beberapa tahun di Indonesia yang selanjutnya digantikan oleh internal control structure yang digunaka...

  5. Asuransi Takaful: Prospek Dan Tantangannya

    OpenAIRE

    Sobirin, Achmad; Muhtar, Muchsin

    1994-01-01

    Dewasa ini perhatian terhadap nilai-nilai syariah Islam terhadap muamalah khususnya di bidang ekonomi menjadi besar. Lembaga perekonomian yang terjalin dengan pranata keagamaan makin menggejala dimana-mana dan kini sedang tumbuh mencari bentuk untuk dapat diterima di tengah-tengah masyarakat.

  6. KETENTUAN TENTANG STANDAR PELAYANAN MINIMAL BIDANG KELUARGA BERENCANA DAN KELUARGA SEJAHTERA BERDASARKAN ASAS PERIKEMANUSIAAN DAN HAK ASASI MANUSIA

    Directory of Open Access Journals (Sweden)

    . Riyanti

    2017-01-01

    Hasil penelitian, ketentuan tentang standar pelayanan minimal bidang keluarga berencana, keluarga sejahtera dan asas perikemanusiaan dengan hak asasi manusia sangat berhubungan keterbatasan lingkup pelayanan dan standar pelaksanaan Komunikasi Informasi dan Edukasi yang tidak jelasberdampak pada tidak dipenuhinya hak asasi manusia untuk mendapatkan kesetaraan dan kebebasan dalam pelayanan keluarga berencana dan keluarga sejahtera.

  7. Mentorat par les pairs de journalistes scientifiques dans les pays en ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce n'est pas d'hier que le CRDI appuie l'avancement du journalisme scientifique dans le Tiers-Monde. Depuis 2000, le CRDI a aidé à mettre en place le Réseau Sciences et Développement (SciDev.Net). Ce réseau, établi à Londres, exploite des noeuds régionaux dans les pays en développement; il a joué un rôle de ...

  8. The place branding of Qatar

    NARCIS (Netherlands)

    de Jong, Maaike

    2011-01-01

    Destination branding has become popular. Countries brand themselves to draw visitors and competent expatriates and to create economic diversification. The brand emphasises the uniqueness of the place; it frames the culture and sells its way of life. In the perspective of tourism, this research

  9. Play Memories and Place Identity.

    Science.gov (United States)

    Sandberg, Anette

    2003-01-01

    This retrospective study examined play memories from childhood to adulthood of 478 university students between ages 20 and 62 as exhibited in drawings of play memories and questionnaire responses. The study focused on the role of the physical environment and place identity in play memories and individual identity development. Findings showed that…

  10. Capturing a Sense of Place.

    Science.gov (United States)

    Riley, Cheryl K.

    1995-01-01

    Outdoor educators can help students, program participants, and colleagues find a special place in nature that enables them to cherish nature's gifts, its healing power, and its ability to bring inner peace. Becoming emotionally connected with nature promotes development of an environmental ethic and a sense of stewardship for the land. (LP)

  11. The Social Attachment to Place

    Science.gov (United States)

    Dahl, Michael S.; Sorenson, Olav

    2010-01-01

    Many theories either implicitly or explicitly assume that individuals readily move to places that improve their financial well-being. Other forces, however, offset these tendencies; for example, people often wish to remain close to family and friends. We introduce a methodology for determining how individuals weigh these countervailing forces, and…

  12. A Place on the Shelf

    Science.gov (United States)

    Thomas, Devon

    2007-01-01

    If we read to discover new worlds, we also read to find ourselves. For gays and lesbians, this act of discovery can be problematic: literature has so often excluded them. In the last decades, as gays and lesbians have grown increasingly vocal in the effort to secure their rightful place in society, a broad range of fiction has emerged that…

  13. KINERJA DAN EFISIENSI BANK PEMERINTAH (BUMN DAN BUSN YANG GO PUBLIK DI INDONESIA

    Directory of Open Access Journals (Sweden)

    Sugeng Haryanto

    2012-06-01

    Full Text Available Penelitian ini menganalisis kinerja dan tingkat efisiensi bank-bank BUMN dan BUSN yang go Publik di Bursa Efek Indonesia.  Sample penelitian ini mengambil  tiga bank BUMN Bank BNI 46, Bank Mandiri dan Bank BRI  dan tiga bank BUSN (Bank BCA, Bank Niaga dan Bank Panin dengan periode analisis tahun 2005-2011. Varibael yang digunakan meliputi ROA, ROE, LAR. LDR, NPL dan BOPO. Tujuan dari penelitian ini adalah melihat dan menganalisis perbedaan kinerja antara Bank BUMN dan BUSN yang go public di Bursa Efek Indonesia tahun 2005-2011.  Pendekatan pengukuran kinerja yang digunakan adalah Return on Asset (ROA, Return on Equity (ROE dan Loan to Deposit Ratio (LDR, Loan to Asset Ratio (LAR,  dan efisiensi bank. Hasil dari penelitian menunjukkan bahwa 1 Bank-bank nasional, baik itu bank BUMN maupun BUSN menunjukkan kinerja yang semakin baik, 2 tidak terdapat perbedaan yang signifikan antara kinerja bank BUMN dan BUSN untuk variabel ROA, ROE, LAR, LDR, dan BOPO sedangkan variabel NPL yang merupakan indikator risiko kredit menunjukkan adanya perbedaan yang signifikan antara Bank BUMN dan BUSN

  14. PEMBINAAN DAN PENGEMBANGAN USAHA KECIL

    Directory of Open Access Journals (Sweden)

    Sentot Harman Glendoh

    2001-01-01

    Full Text Available Small business as an economic activity of society on a small scale, has a central role in the economy of Indonesia. Although the economic crisis has created a great disturbance in the live of large and middle-size business, apparently small business continues to function well in the lower levels of the economy. The main role of small business is: 1 use excess labor; 2 as a producer of goods and services at reachable prices for the lower economic levels of society; 3 as a potential producer of foreign exchange because of the success of this type of industry in producing non-oil commodities for export. Remembering that the role of small business is large and has great influence on the lower economic levels of society, it is quite necessary to pay attention to the development of this sector. Abstract in Bahasa Indonesia : Usaha kecil sebagai kegiatan ekonomi rakyat berskala kecil memiliki peran sentral dalam perekonomian Indonesia. Walaupun krisis ekonomi telah memporakporandakan kehidupan bidang usaha besar dan menengah, ternyata usaha kecil tetap tegar dan berjalan marak dikawasan kehidupan ekonomi tingkat bawah. Peran pokok usaha kecil ini adalah: (1 sebagai penyerap tenaga kerja, (2 sebagai penghasil barang dan jasa pada tingkat harga yang terjangkau bagi kebutuhan rakyat banyak yang berpenghasilan rendah, (3 sebagai penghasil devisa negara yang potensial kerena keberhasilannya dalam meproduksi komoditi ekspor non migas. Mengingat peran usaha kecil tersebut sangat besar andilnya bagi negara dan masyarakat kecil dilapisan bawah, maka pembinaan dan pengembangannya sangat perlu diperhatikan. Kata kunci: pembinaan, pengembangan, usaha kecil.

  15. Bandar Niaga di Perairan Maluku dan Perdagangan Rempah-Rempah

    Directory of Open Access Journals (Sweden)

    John A. Pattikayhatu

    2016-04-01

    Full Text Available Abstrak Kepulauan Maluku telah dikenal dalam jaringan perdagangan di Nusantara sejak masa lampau. Wilayah ini masuk dalam jaringan perdagangan karena merupakan sumber utama komoditi rempah-rempah khususnya cengkih dan pala. Berbagai catatan historis yang ada telah memberikan konfirmasi bahwa komoditi yang dihasilkan dari wilayah ini telah diperdagangkan hingga ke Eropa dan tempat-tempat lain di dunia. Tulisan ini membahas tentang jalur perdagangan dan pelayaran dalam konteks perdagangan rempah-rempah, bandar-bandar niaga di perairan Maluku, serta kehancuran peran perdagangan rempahrempah di Maluku.   Abstract Maluku Islands are known in the trade network in the archipelago since past. These areas included in the network as the main source of commodity trading of spices, especially cloves and nutmeg. Existing historical records has confirmed that the commodities produced from this region have been trafficked to Europe and other places in the world. This paper discusses the trade and shipping in the context of the spice trade, the commercial port in the waters of the Moluccas, and the destruction of the role of the spice trade in the Moluccas.

  16. AGROFORESTRI UNTUK ADAPTASI DAN MITIGASI PERUBAHAN IKLIM

    Directory of Open Access Journals (Sweden)

    Tigor Butarbutar

    2017-01-01

    Full Text Available Hilangnya tutupan lahan hutan karena konversi hutan untuk pemukiman, perkebunan, pertanian dan kebutuhan untuk pembangunan di sektor lain, telah menyebabkan perubahan pola cuaca/iklim di berbagai tempat. Perubahan iklim dapat diantisipasi dengan mitigasi dan adaptasi. Mitigasi berarti usahausaha pencegahan yang perlu dilakukan, sedangkan adaptasi merupakan kegiatan-kegiatan penyesuaian yang perlu dilakukan untuk dapat hidup dan bertahan dan meningkatkan ketahanan, kelenturan dan mengarahkemigrasikarenakondisiiklimyangberbeda.Agroforestridapatmemitigasidanmengadaptasi perubahaniklim dengan alasan-alasansebagaiberikut: aPencampuranjenis pohonpenghasilkayu,buah dan lain-lain, karena campuran jenis lebih baik dari tanaman murni; b Pencampuran jenis yang didasarkan pada sifat toleransi ( dan , sehingga akan memanfaatkan seluruh cahaya untuk fotosintesis; c Pencampuran perbedaan umur; d Pencampuran berdasarkan perbedaan waktu pemanenan; e Penggabungan nilai ekonomi, sosial dan budaya sehingga perubahan vegetasi dapat berjalan seiring dengan perubahan sosial dan budaya secara berangsur yang dapat disesuaikan dengan perubahan iklim; dan f Dapat digunakan sebagai model untuk memfasilitasi perubahan kelompok vegetasi menjadi kelompok yang baru (adaptasi, seperti teori perubahan vegetasi melalui perladangan berpindah-pindahyangteratur.

  17. INDUSTRIALISASI DAN TANTANGANNYA PADA SEKTOR PENDIDIKAN

    Directory of Open Access Journals (Sweden)

    Arif Unwanullah

    2015-10-01

    Full Text Available Abstrak: Industrialisasi dan Tantangannya pada Sektor Pendidikan. Sumbangan pendidikan dalam perubahan dan pembangunan masa lalu telah bergeser dengan kemajuan teknoekonomi dan komunikasi. Perubahan yang terjadi telah menggeser tatanan kehidupan dan pandangan masyarakat. Materialisme, kapitalisme, efisiensi, dan efektivitas telah menjadi tujuan dan semangat hidup. Pergeseran pandangan masyarakat telah mengubah pula pandangan keberhasilan dan mutu pendidikan, di mana pendidikan diukur dari keberhasilan dalam keterserapan lulusan dalam dunia kerja, oleh karenanya pendidikan dianalisis dari karakteristik sebagai investasi (capital-investment. Pergeseran makna dan tanggung jawab pendidikan mendorong dunia pendidikan melakukan pembaruan dengan alternatif: membangun pembaruan penalaran warganya menuju pemerdekaan dan pendewasaan, pendidikan dilaksanakan secara komprehensif dan bekerjasama dengan semua pihak secara kemitraan, dan membangun visi pendidikan secara komprehensif dan simultan dengan semua pihak. Kata kunci: perubahan sosial, materialistik, modernisasi dan kapitalis Abstract: Industrialization and its education Sector challenges. Contribution of education has shifted with the progress of technology, economy, and communication. The changes have shifted the society's views. Materialism, capitalism, efficiency, and effectiveness have become of interest and enthusiasm for life. The shift has changed society's view, i.e. the view of success and quality of education, in which education is measured from a rate of the absorption of graduates into labor market, therefore education is analyzed from the characteristics of an investment (capital-investment. A shift in meaning and responsibility of education encourages the education sector to create reformation through these following alternatives: creating new thoughts towards liberation and maturation, implementing education comprehensively and cooperating with all parties in partnership, and creating

  18. Legenskap Masyarakat Bangkalan dan Unsur-­Unsur Pembentuknya

    Directory of Open Access Journals (Sweden)

    Iqbal Nurul Azhar

    2016-12-01

    Full Text Available Tujuan pelitian ini adalah menjelaskan legenskap di Kabupaten Bangkalan. Metode analisis data yang digunakan adalah analisis data interaktif yang diusulkan oleh Miles dan Huberman. Hasil penelitian menunjukkan bahwa jenis legenda yang terdapat pada masyarakat Bangkalan ada lima, yaitu asal muasal berdirinya sebuah daerah, kesaktian tokoh masyarakat yang telah meninggal dan kuburannya dianggap keramat, tempat-tempat mistik, penyebaran agama Islam, dan asal-usul munculnya sebuah budaya. Sebaran layer berdasarkan waktu terbentuknya, terbagi menjadi lima, yaitu legenda klasik, neoklasik, zaman tengah, zaman baru, dan masa kini. Berdasarkan hubungan cerita, Kabupaten Bangkalan dibagi menjadi empat kontur legenda, yaitu kontur utara, barat, selatan, timur, dan tengah. Penelitian ini juga menemukan dua fakta menarik yaitu adanya empat legenda yang melibatkan karakter perempuan Madura yang kuat bernama Bendoro Gung, Dewi Retnadi, Syarifah Ambami, dan Dewi Nawang Wulan. Keempat wanita ini sangat dihormati orang Madura padahal budaya Madura terkenal dengan patriarkatnya. Fakta kedua adalah jejak Pangeran Trunojoyo yang begitu terkenal di Madura namun tidak tampak menghiasi skap legenda masyarakat Bangkalan. The purpose of this study is to explain the Bangkalanese legendscape. The method used to analyze the data was the interactive data analysis, which was proposed by Miles and Huberman. From the data analysis, it has been found that there are five types of Bangkalan legends, namely: the origin of the establishment of a region, respectful leaders who died, living his/her sacred grave, mystical places, the spread of Islam, and the origins of the emergence of a culture. It has also been found the distributional of layers of legends existance namely: classics, neoclassic, middle ages, new era, and present layers. Based on the legend interrelations, it has been found four contours of legends, namely the north, west, the south, the east, and the central

  19. Desain dan Uji Kinerja Fungsional Sistem Penggerak dan Kendali ROVERGARD

    Directory of Open Access Journals (Sweden)

    Moh Fikri Pomalingo

    2017-04-01

    Full Text Available Abstract The high population rate has an impact on increasing of land function change from agricultural land become housing and commercial building. As a result, it is difficult to get land for planting in the urban area. Therefore, this research is aimed to design equipment that can be used for planting in the narrow land using vertical gardening. This paper will report about design and functional testing of drive and control system on ROVERGARD. Drive system is based on water pump with additional gear train and chainsprocket mechanism. Control system use was on open loop type based on timer. The performance test of drive system was focused on electrical energy consumption and rotational speed of the system that was measured by multifunctional mini ammeter and tachometer. The control system was tested during 4 days, to evaluate their performances between set point and actual timing while filling water tank and rotate the system at maximal load condition. Electrical power consumption was 208 W at average rotational speed 2703 rpm. Increasing load caused an increase of energy consumption but made the drive rotation decline. The position control performance had on position error around 50 cm. Consequently, setting time on timer must be adjusted. Abstrak Laju pertumbuhan penduduk yang tinggi, mengakibatkan tingginya alih fungsi lahan pertanian menjadi bangunan perumahan dan komersial. Masalah ini mengakibatkan sulitnya mencari lahan pertanian di daerah padat penduduk khususnya perkotaan. Oleh karena itu perlu dirancang sebuah alat yang dapat digunakan untuk bercocok tanam di lahan sempit. Tujuan dari penelitian ini adalah mendesain dan menguji sistem penggerak dan kendali pada ROVERGARD. Sistem penggerak berasal dari pompa air yang dimodifikasi. Sedangkan sistem kendali menggunakan tipe open loop berbasis waktu dimana timer sebagai komponen utamanya. Pengujian kinerja penggerak difokuskan pada konsumsi listrik dan rpm yang diukur menggunakan

  20. Pour en lire plus : Dark Tourism and Place Identity

    OpenAIRE

    DIAZ, Jérémy

    2016-01-01

    Quatre ans après The Darker Side of Travel: The Theory and Practice of Dark Tourism (2009, Bristol, Channel View Publications), dirigé par Richard Sharpley et Philip R. Stone, l’ouvrage collectif Dark Tourism and Place Identity: Managing and Interpreting Dark Places constitue une autre contribution remarquable à la compréhension scientifique du dark tourism. À l’intersection des travaux sur l’identité du lieu et le dark tourism, ce livre propose une approche internationale de l’objet dans une...

  1. KONTEKS DAN KONSTRUKSI SOSIAL MENGENAI KEMATIAN ELEKTIF ( EUTHANASIA ∗

    Directory of Open Access Journals (Sweden)

    Helly Prajitno Soetjipto

    2015-09-01

    konteks sosial dan konstruksi sosial kematian. Euthanasia didiskusikan di dalam suatu kerangka pikir yang mencoba memberi perhatian kepada hal-hal yang kontekstual dan interpretatif fenomena sosial suatu proses kematian dan kejadian kematian

  2. Place visitation, place avoidance, and attitudinal ambivalence: new concepts for place research in urban recreation settings

    Science.gov (United States)

    David B. Klenosky; Christine A. Vogt; Herbert W. Schroeder; Cherie LeBlanc Fisher

    2010-01-01

    This paper draws on recent developments in research on consumer behavior and attitudes to better understand the range of behaviors and attitudes inherent in a diverse urban area. Using a mail survey of Chicago-area residents, we collected data (1) to examine residents' past visitation behavior and recommendations of places to visit and to avoid for a range of...

  3. DIAGNOSIS DAN PENATALAKSANAAru LIMFOMA ORtsITA

    Directory of Open Access Journals (Sweden)

    Ardizal Rahman

    2014-12-01

    Full Text Available Limfoma orbita merujuk pada limfoma yang terjadi di konjungtiva, kelenjar lakrimal, palpebradan otot-otot ekstraokular. Limfoma primer non-Hodgkin (NHL dari orbita dapat ditemukanpada hanya 1o/o dari semua limforna non-Hodgkin. Anaiisis mutasi somatik pada regiovariabel (V dari immunoglobulin (ig dan segmen gen rantai berat (H telah menunjukkanperan dari stimulasi antigen kronik pada patogenesis limfoma /nucosa-associated lymphoidflssue (MALT. Patogen mikroba seperti Helicobacter pylaridan Chlamydia pneumonia dapaimendasari proses inflamasi dan pada akhirnya memicu akuisisi MALT juga memainkanperan penting dalam tranformasi maligna dan ekspansi klonal lanjutan limfoma. Penentuanstadium kanker sangat penting karena akan menentukan terapi apa yang akan diberikan dankemungkinan remisi dan prognosisnya. Berdasarkan sistem stadium Ann-Arbor, limfoma yangterbatas di orbita disebut sebagai stadium l, keterlibatan struktur sekitar (sinus paranasal,tonsil, dan hidung menjadikannya stadium ll. Stadium lll adalah penyakit nodal abdominaldibawah diafragma dan stadium lV merujuk pada keterlibatan yang tersebar dari satu ataulebih lokasi ekstranodal (hepar, sum-sum tulang atau sistem saraf pusat. Mayoritas pasiendatang dengan keluhan massa konjungtiva berwarna pink (91%, diikuti hiperemis konjungtiva(32%, propiosis (27%, massa palpebra atau orbita (19"fi, penurunan visus dan ptosis (6%,dan diplopia(2%. Bilateralitas terjadi pada 10% hingga 15% kasus dimana 80 % terjadisecarasimultan sedangkan 20% merupakan kondisi yang berurutan. Penilaian lanjut untuk stagingyang akurat dan perencanaan terapitermasuk anamnesis yang lengkap dan pemeriksaan fisik,pemeriksaan laboratorium rutin, elektroforesis protein sei-um, LDH serum, Fr-mikroglobulin,rontgen thoraks, CT scan thoraks, abdornen, dan pelvis, dan biopsisum-sum tulang. Diagnosapositif harus berdasarkan pada perneriksaan histologik dari sampeltumor yang memadai yangdiperoleh dengan biopsiorbita. Beberapa kriteria

  4. TRANSFORMASI ORGANISASIONAL DAN MSDM: HAMBATAN DAN IMPLIKASINYA PADA REKRUTMEN DAN SELEKSI

    Directory of Open Access Journals (Sweden)

    Licen Indahwati Darsono

    2002-01-01

    Full Text Available Rapid change of environment is an external force that causes the organization to transform. Fundamentally, the main purpose of the transformation is to change the organizational structure to be more flexible and competitive with fewer hierarchial levels, managers, and employees. The transformation needs to be radical, causing resistance from the organization's members. Their resistance can cause the transformation to fail, therefore organization must find ways to lessen this resistance. First, organization must learn about the diversity of its members' cultures and values. Second, organization must build its own organizational culture which can support the success of the transformation, by communicating it with the members of the organization. To support organizational culture building efforts, it needs changes in human resources practices, especially recruitment and selection. Abstract in Bahasa Indonesia : Perubahan yang cepat dalam lingkungan merupakan kekuatan eksternal yang mengakibatkan transformasi dalam sebuah organisasi. Pada dasarnya, tujuan utama dari transformasi tersebut adalah merubah struktur organisasi agar menjadi lebih fleksibel dan mampu bersaing, dengan tingkat structural yang sedikit, serta jumlah manajer dan karyawan yang lebih kecil. Transformasi tersebut harus menyeluruh, dan hal ini dapat menyebabkan resistensi dari para anggota organisasi yang memperhambat perubahan tersebut. Resistensi itu bisa menyebabkan perubahan tersebut batal, oleh karena itu organisasi harus mencari jalan untuk mengurangi hambatan-hambatan tersebut. Pertama, organisasi harus belajar keanekaragaman dari budaya dan nilai anggotanya. Kedua, organisasi harus mengembangkan budaya organisasi sendiri melalui komunikasi yang baik dengan anggotanya. Untuk mendukung usaha mengembangkan budaya organisasi, harus ada perubaban pada kebijakan sumber daya manusia, terutama dalam rekrutmen dan seleksi karyawan. Kata kunci: transformasi, resistensi, budaya

  5. Komunikasi dan Praksis Kebebasan

    Directory of Open Access Journals (Sweden)

    Teguh Ratmanto

    2000-12-01

    Full Text Available His paper concerns with communication and praxis of freedom. Communication in wider perspective is not just transftring a message but more than that. It is not just a process but involves many aspects of human lift such as culture and language. Culture and language reflect an understanding of reality. We can only perceive reality through language,whilelanguage can not be separated from culture. Language, basicly, is symbolization of reality using meaningful sign. That symbolization reducts reality into single aspect perceived by signs, however they want to represent it in one-ta-one correspondence. So the reality we perceive through language is not the real reality. It means that the communication we do is a complex action. The process of establishing meaning has something to do with people, because sign (language . by itself has no meaning. Words do not mean but people mean. In relating with power, the meaning ofsign (languange is determined by who holds the power. Whoever they are, they will have a dominant interpretation of meaning. Communication (as far as relate to culture, language, reality, and signis no longer free because it is not reflecting reality anymore, but symbolizing the power. Communication. naturally, is reflecting reality, that what we call free communication. But the(politicalpower has canged communication being just a tool for their interest. Communication reflects reducted reality. That is a chained communication. Communication has to be placed again in its natural place (reflecting reality sowe can interpretate reality freely.

  6. GLOBALISASI DAN IMPAK SOSIOBUDAYA

    Directory of Open Access Journals (Sweden)

    Aishah@Eshah Haji Mohamed

    2017-08-01

    Full Text Available Globalization, the ongoing process of greater interdependence among countries and their citizens, is complex and multifaceted. Many of the problems that the critics of globalization point to are real. This article on the socio-cultural  impact of  globalization  on the semi-urban  populations uses data collected in three districts in Selangor (Sepang, Kuala Selangor and Kuala Langat, Malaysia using survey and in depth interviews method.  The socio-cultural impact of globalization on the semi-urban populations of Selangor can be seen from several angles. Among other things are the changes in interpersonal relationship due to changes in occupations, places of works, places of residence and different work schedules. Thus a new kind of relationship evolved i.e. between different categories of workers and the management. This creates a totally new environment whereby the management determined certain aspects of the life of workers such as pay rise and work schedules. Their life styles are also different. With the improved economic condition more job opportunities are available for foreign workers and women.  The children are now being looked after by maids or the so called transit houses which are not based on family relationship. The influx of foreign workers also expose the local populations to various infectious diseases such as tuberculosis, malaria (which had been eradicated in the country long time ago, SARS and H1N1.  

  7. Perbandingan Akurasi Pengukuran Suhu Dan Kelembaban Antara Sensor DHT11 Dan DHT22

    OpenAIRE

    Saptadi, Arief Hendra

    2014-01-01

    Suhu dan kelembaban merupakan dua objek pengukuran yang acapkali terdapat di dalam sistem akuisisi data. Terdapat banyak piranti sensor yang berfungsi untuk mengukur dua objek tersebut dan akurasi merupakan salah satu parameter yang dapat digunakan untuk memilihnya. DHT11 dan DHT22 adalah sensor seri DHT dari Aosong Electronics yang dapat melakukan pengukuran suhu dan kelembaban secara serempak dengan keluaran digital. Informasi tentang akurasi terdapat di dalam lembar data keduanya. Kendati ...

  8. Pertumbuhan dan Mutu Fisik Bibit Jabon (Anthocephalus Cadamba Miq.) di Polibag dan Politub

    OpenAIRE

    Junaedi, Ahmad

    2010-01-01

    Informasi pertumbuhan dan mutu fisik bibit jabon (Anthocephalus cadamba Miq.) di wadah bibit dengan volume yang berbeda diperlukan sebagai bagian yang akan diperhitungkan dalam pemilihan wadah bibit yang akan digunakan. Penelitian ini dilakukan untuk mengetahui pertumbuhan dan mutu fisik bibit jabon yang disapih pada wadah bibit polibag (volume 300 cm3) dan politub (volume 60 cm3). Tahapan penelitian meliputi : pembibitan serta pengamatan pertumbuhan dan penilaian mutu fisik bibit jabon yang ...

  9. Dampak belanja irigasi dan jaringan terhadap output PDRB sektor pertanian dan pertumbuhan ekonomi Kota Jambi

    OpenAIRE

    Aminah, Siti; Parmadi, Parmadi

    2018-01-01

    Penelitian ini bertujuan untuk menganalisis perkembangan Belanja irigasi dan jaringan serta perkembangan output GDP sektor pertanian Kota Jambi selama periode tahun 2005-2015 dan menganalisis pengaruh belanja irigasi dan jaringan terhadap  GDP Output sektor pertanian dan pertumbuhan ekonomi Kota Jambi. Hasil penelitian menunjukkan Selama periode penelitian tahun 2005-2015 dengan rata-rata pertumbuhan 61,98%, nilai rata-rata PDRB harga berlaku Kota Jambi sebesar 157.601,68 dalam juta rupi...

  10. Building Place Identity through Heritage

    OpenAIRE

    Alexandra PACESCU; Vlad THIERY

    2015-01-01

    In an increasingly globalized world, the fading specificity is producing homogeneous images that make cities more and more difficult to tell apart. The market economy tends to commodify each and every aspect of urban life, even those belonging to the cultural realm. As a consequence, a need for differentiators arises, which can be best embodied by the local heritage. The present paper is trying to establish a link between the concept of Place Identity, seen from a marketing point of view, ...

  11. Wacana Penjarahan Dan Kekerasan Simbolik Terhadap Petani

    Directory of Open Access Journals (Sweden)

    Agus Sudibyo

    2002-01-01

    Full Text Available Perlawanan kaum petani sudah lama terjadi dalam konteks sejarah hubungan antara si kaya dan si miskin dan antara kaum petani dan negara. Persoralannya selalu bahwa negara, aparat keamanan dan pemilik modal telah mengambil alih secara paksa surplus ekonomi dari petani. Mereka bekerja sama dalam aksi penyerobotan tanah petani, pendirian perkebunan-perkebunan dan dalam menghadapi gerakan protes petani. Negara bukan hanya menghadapi gerakan perlawanan petani dengan represi-represi fisik. Secara sistematis negara juga melakukan propaganda dengan menciptakan gambaran-gambaran yang unfavourable tentang petani pelaku penjarahan dalam berbagai representasi wacana. Dalam batas tertentu, media massa justru memperkuat kecenderungan ini dengan menonjolkan dimensi kekerasan, pemberontakan dan anarkisme dalam mewacanakan aksi-aksi penjarahan petani.

  12. Motivasi, Kebiasaan, dan Keamanan Penggunaan Internet

    Directory of Open Access Journals (Sweden)

    Zinggara Hidayat

    2017-01-01

    Full Text Available Abstract: This study investigates motivation, habits, and security of internet use by high schools and universities students in Jakarta, Bogor, Depok, Tangerang, and Bekasi. This descriptive and quantitative reasearch uses survey method. The findings of the study show that the strongest motivation is to show self existence, entertainment, and academic purposes. At some points, the habit of using the internet also makes the students face some risks such as verbal and nonverbal abuses, bullying, pornoghrapy, account hacking, and the risk of interaction with unknown parties. Abstrak: Penelitian ini menyelidiki motivasi, kebiasaan, dan keamanan penggunaan internet di antara siswa sekolah menengah atas dan universitas di Jakarta, Bogor, Depok, Tangerang, dan Bekasi. Penelitian deskriptif kuantitatif ini menggunakan metode survei. Hasil penelitian menunjukkan bahwa motivasi paling kuat adalah untuk memperlihatkan eksistensi diri, pencarian hiburan, dan penyelesaian tugas akademis. Kebiasaan penggunaan internet oleh pelajar dan mahasiswa menghadapi beberapa risiko, seperti kekerasan verbal dan nonverbal,

  13. SOSIAL MEDIA DAN PERUBAHAN INDEKS PRESTASI MAHASISWA

    Directory of Open Access Journals (Sweden)

    Risnah Risnah

    2015-12-01

    Tujuan dari penelitian ini adalah mengetahui jumlah mahasiswa semester II, IV, dan VI Jurusan Keperawatan yang menggunakan internet secara aktif dan karak-teristiknya, membandingkan hasil belajar mahasiswa semester II-III, IV-V, dan VI-VII Jurusan Keperawatan, dan mengetahui pengaruh sosial media (facebook dan twitter terhadap perubahan indeks prestasi mahasiswa, dengan jumlah res-ponden sebanyak 150 orang. Penelitian ini adalah deskriptif dengan desain pene-litian kausal. Pengumpulan data dengan menggunakan instrumen berupa kuesio-ner, dengan jumlah responden sebanyak 150 orang. Adapun hasil penelitian me-nunjukkan bahwa indeks prestasi mahasiswa dengan penggunaan sosial media umumnya responden menyatakan sosial media tidak mempengaruhi indeks prestasi. Dari hasil analisis uji statistik diperoleh terdapat pengaruh antara sosial media (facebook dan twitter dengan indeks prestasi. Dengan begitu, penggunaan sosial media harus digunakan sebagaimana mestinya, agar mahasiswa/i yang ak-tif pengunaan sosial media tidak mempengaruhi indeks prestasinya.

  14. Your Place or Mine? Reading Art, Place and Culture

    DEFF Research Database (Denmark)

    Brander, Birgitte Gade; Reisberg, Mira; Greenwood, David

    2006-01-01

    and force colleges of education into the position of creating programs that demonstrate compliance with governing codes. Educational practices are usually developed and become entrenched without a clear articulation of the theories on which they are founded. Critical pedagogy is committed to the exploration...... and development of a culture of schooling that supports the nature of self-conscious critique. Like critical pedagogues, place-based educators are centrally concerned with cultural context of teaching and learning and the role of schooling in shaping and reconstructing society. In drawing on the local environment...

  15. Persepsi Santri dan Kiai terhadap Pluralisme Agama di Pendidikan Ulama Tarjih Muhammadiyah (PUTM dan Aswaja Nusantara Yogyakarta

    Directory of Open Access Journals (Sweden)

    Zainal Arifin

    2017-05-01

    Abstrak: Perdebatan pluralisme agama masih mengemuka dalam konteks masyarakat majemuk di Nusantara. Bahkan, tidak jarang menimbulkan konflik dan perang pemikiran. Menarik melihat perspektif kiai dan santri Muhammadiyah dan NU terhadap isu pluralisme melalui praktik pendidikan di Ulama Tarjih Muhammadiyah (PUTM Yogyakarta dan Pondok Pesantren Aswaja Nusantara Yogyakarta yang dianggap representatif karena membawa muatan konsep, ide dan paradigma dari Muhammadiyah dan NU. Penelitian ini bersifat kualitatif,  data diperoleh dari wawancara dan studi kepustakaan dengan saling memberikan verifikasi, koreksi dan pelengkap. Hasil penelitian ini, PUTM dan Pesantren Aswaja Nusantara memiliki konsep yang sama dalam memegang teguh akidah, yakni sikap eksklusif dan menolak pluralisme secara teologis namun menerimanya secara sosiologis. Sehingga, paradigma dari dua lembaga tersebut merepresentasikan dari paradigma Muhammadiyah dan NU dalam merespon fenomena pluralisme agama dan budaya.

  16. VAKSIN DENGUE DAN PERKEMBANGANNYA SAAT INI DAN DI MASA MENDATANG

    Directory of Open Access Journals (Sweden)

    Triwibowo Ambar Garjito

    2012-09-01

    Full Text Available Dengue virus merupakan salah satu virus anggota dari famili Flaviviridae yang sejak tahun 1956 telah dikenal dapat menimbulkan demam dengue maupun demam berdarah dengue (DBD. Penyakit yang ditularkan oleh nyamuk Aedes aegypti ini diperkirakan telah menjangkiti pada selatar 50-100 juta manusia dengan 500.000 kasus di antaranya dalam manifestasi yang ganas yang dikenal sebagai dengue haemorrhagic fever dan dengue shock syndrome dan 25.000 di antaranya berakibat fatal (meninggal. Saat ini pengembangan vaksin merupakan salah satu solusi yang diharapkan dapat menekan penyebaran penyakit tersebut. E (envelope merupakan salah satu bagian dari protein struktural virus yang sangat penting dalam pengembangan vaksin, yaitu sebagai badan yang memproduksi antibodi netralisasi untuk protein. Non-struktural protein l juga telah diketahui sebagai salah satu komponen penting dalam pengembangan vaksin oleh karena kemampuannya untuk dapat diekspresi pada permukaan sel yang diinfeksi yang dapat menjadi target untuk immune cytolisis. Ada dua pendekatan yang digunakan dalam memproduksi suatu vaksin dengue, yaitu: a. Vaksin hidup yang telah dilemahkan (live attenuated vaccine: b. Vaksin hasil rekayasa (engineered vaccine. Penelitian terhadap vaksin DENV baik rekombinan maupun non-rekombinan yang didasarkan pada uji virus telah dilakukan secara terus-menerus baik pada monyet dan manusia. Sampai saat ini telah dikembangkan sejumlah kandidat vaksin DENV yang berdasar pada tetravalent virus dengue, yaitu a. vaksin konvensional, b. vaksin dengue rekombinan berdasar pada flavivirus, c. vaksin intertypic chimeric, d. vaksin chimerivac, e. vaksin dengue rekombinan menggunakan vector non-ftavivirus dan f. vector adenovirus. Namun demikian, sampai sekarang belum ada vaksin yang siap digunakan untuk menangkal infeksi ke empat serotype virus dengue, sehingga masih diharapkan untuk pengembangan virus lebih lanjut.   Kata kunci: Aedes aegypti, dengue virus, vaksin dengue.

  17. Le nom Škerlj dans le cadre des noms Slovenes actuels

    Directory of Open Access Journals (Sweden)

    Franc Jakopin

    1975-11-01

    Full Text Available L'auteur du présent article place le nom Škerlj dans le cadre des noms slovènes actuels qui ont la même constitution phonetique, en éliminant les noms qui, par leur répartition géographique, leurs fréquences et caractéristiques formales, n'entrent pas dans ce cadre. A l'origine du nom Škerlj (et de ses variantes entrent l'appelatif skril (Schiefer et la base d'une onomatopée populaire škrlj (alauda. Par l'énorme force de créer les noms propres de cette derniere nommée, on chercherait l'origine du nom Škerlj surtout dans celle-ci.

  18. BAHAYA LATEN INFEKSI GONORE DAN KLAMIDIA DI ASIA SELATAN & ASIA TENGGARA, DI INDONESIA DAN KOTA MANADO

    Directory of Open Access Journals (Sweden)

    Aron Pirade

    2014-04-01

    menempati urutan tertinggi. Wilayah Asia Selatan dan Asia Timur-Selatan (juga disebut Asia Tenggara adalah wilayah dengan prevalensi Gonore dan Klamidia terbesar. Prevalensi Gonore di tahun 1995 dan 1999 yaitu 29.11 dan 27.2 juta penduduk wilayah Asia Selatan dan Asia Tenggara. Klamidia, di tahun 1995 dan tahun 1999 yaitu 40.48 dan 42.89 juta penduduk wilayah Asia Selatan dan Asia Tenggara. Di Indonesia sendiri, pada 11 area penelitian menunjukkan bahwa prevalensi Gonore dalam wilayah Indonesia menunjukkan rata-rata prosentasenya 20%-40% dari keseluruhan STI pada wanita beresiko tinggi terkena STI. Sedangkan infeksi oleh Klamidia prosentasenya 15%- 45% dari keseluruhan STI pada wanita beresiko tinggi terkena penyakit kelamin. Prosentase Gonore dan Klamidia di Kota Manado rata-rata 15-30%. Tingginya prevalensi infeksi Gonore dan Klamidia di Asia Tenggara, ternyata diikuti juga dengan tingginya perkembangan infeksi Gonore dan Klamidia di Indonesia dan Kota Manado.

  19. Formation des formateurs : place dans une éducation de qualité des adultes

    Science.gov (United States)

    Diarra, Mahamadou Cheick

    2011-08-01

    Training the trainers: its role in high-quality adult education - This article is about the crucial role of instructor training; it discusses the implications for the quality of adult learning and education. The documents arising out of CONFINTEA V and VI, the Hamburg Declaration, the Agenda for the Future and the Belém Framework for Action all recognise the critical role played by facilitators and adult instructors in the quality of adult learning and education. However, all over the world, they are undertrained and poorly paid by comparison with their counterparts in the formal education sector. In West Africa, where the average literacy rate is 20%, the situation of these facilitators and instructors and the conditions in which they work are becoming alarming, particularly since actors' expectations of them are constantly increasing. This article aims to clarify the most important reasons for this marginalisation and then provides some key pieces of guidance on how to move forward in terms of the political context, the literate environment, skills and languages, curricula, teaching methods and learner needs, materials, monitoring and evaluation and research.

  20. 191 Analyse de la répartition spatiale des places publiques dans la ...

    African Journals Online (AJOL)

    TOHOZIN

    de Porto-Novo, Bénin. Coovi Aimé Bernadin TOHOZIN1* et Odile DOSSOU GUEDEGBE2. 1RECTAS, Département de Cartographie, Obafemi Awolowo University Campus Off Road 1,. PMB 5545, Ilé - Ifè, Osun State, Nigéria. 2Université d'Abomey-Calavi, Département de Géographie et d'Aménagement du Territoire, Bénin ...