Sugar, acid and furfural quantification in a sulphite pulp mill: Feedstock, product and hydrolysate analysis by HPLC/RID.

Science.gov (United States)

Llano, Tamara; Quijorna, Natalia; Andrés, Ana; Coz, Alberto

2017-09-01

Waste from pulp and paper mills consist of sugar-rich fractions comprising hemicellulose derivatives and cellulose by-products. A complete characterisation of the waste streams is necessary to study the possibilities of an existing mill. In this work, four chromatographic methods have been developed to obtain the most suitable chromatographic method conditions for measuring woody feedstocks, lignocellulosic hydrolysates and cellulose pulp in sulphite pulping processes. The analysis of major and minor monosaccharides, aliphatic carboxylic acids and furfurals has been optimised. An important drawback of the spent liquors generated after sulphite pulping is their acidic nature, high viscosity and adhesive properties that interfere in the column lifetime. This work recommends both a CHO-782Pb column for the sugar analysis and an SH-1011 resin-based cross-linked gel column to separate low-molecular-weight chain acids, alcohols and furfurals. Such columns resulted in a good separation with long lifetime, wide pH operating range and low fouling issues.

Differences between easy- and difficult-to-mill chickpea (Cicer arietinum L.) genotypes. Part III: free sugar and non-starch polysaccharide composition.

Science.gov (United States)

Wood, Jennifer A; Knights, Edmund J; Campbell, Grant M; Choct, Mingan

2014-05-01

Parts I and II of this series of papers identified several associations between the ease of milling and the chemical compositions of different chickpea seed fractions. Non-starch polysaccharides were implicated; hence, this study examines the free sugars and sugar residues. Difficult milling is associated with: (1) lower glucose and xylose residues (less cellulose and xyloglucans) and more arabinose, rhamnose and uronic acid in the seed coat, suggesting a more flexible seed coat that resists cracking and decortication; (2) a higher content of soluble and insoluble non-starch polysaccharide fractions in the cotyledon periphery, supporting a pectic polysaccharide mechanism comprising arabinogalacturonan, homogalacturonan, rhamnogalalcturonan, and glucuronan backbone structures; (3) higher glucose and mannose residues in the cotyledon periphery, supporting a lectin-mediated mechanism of adhesion; and (4) higher arabinose and glucose residues in the cotyledon periphery, supporting a mechanism involving arabinogalactan-proteins. This series has shown that the chemical composition of chickpea does vary in ways that are consistent with physical explanations of how seed structure and properties relate to milling behaviour. Seed coat strength and flexibility, pectic polysaccharide binding, lectins and arabinogalactan-proteins have been implicated. Increased understanding in these mechanisms will allow breeding programmes to optimise milling performance in new cultivars. © 2013 Society of Chemical Industry.

Sugar cane/sweet sorghum as an ethanol feedstock in Louisiana and Piedmont

International Nuclear Information System (INIS)

Marsh, L.S.; Cundiff, J.S.

1991-01-01

Cost to provide readily fermentable feedstock for a year round sweet sorghum-to-ethanol production facility, up to the point at which fermentation begins, was determined. It was assumed that sweet sorghum is produced on marginal crop lands in the Southeastern Piedmont, and is purchased, standing in the field by a central ethanol production facility. Feedstock cost varied from $1.96 to $2.98/gal of ethanol potential depending on harvest system and use of by-products. Major contributors to feedstock cost were field production, harvest/field processing, and cost to evaporate juice to a storable syrup. Cost to transport feedstock to a central production facility, and cost of storage were relatively minor components of total cost, contributing only $0.05 and $0.06/gal ethanol potential, respectively. For a point of comparison, cost of producing ethanol feedstock from sugar cane, based on current processing practices in Louisiana sugar mills, was determined to be $2.50/gal ethanol potential. This cost is higher than determined for most options in the Piedmont for two reasons: (1) sugar cane demands a higher price in Louisiana than was assumed for sweet sorghum in the Piedmont, and (2) little market exists in Louisiana for by-products of sugar milling, consequently, no by-product credit was assigned. Current market value of ethanol must approximately double before a sweet sorghum-to-ethanol industry in the Piedmont could be economically viable, as no opportunity was identified for a significant reduction in feedstock cost

A co-production of sugars, lignosulfonates, cellulose, and cellulose nanocrystals from ball-milled woods.

Science.gov (United States)

Du, Lanxing; Wang, Jinwu; Zhang, Yang; Qi, Chusheng; Wolcott, Michael P; Yu, Zhiming

2017-08-01

This study demonstrated the technical potential for the large-scale co-production of sugars, lignosulfonates, cellulose, and cellulose nanocrystals. Ball-milled woods with two particle sizes were prepared by ball milling for 80min or 120min (BMW 80 , BMW 120 ) and then enzymatically hydrolyzed. 78.3% cellulose conversion of BMW 120 was achieved, which was three times as high as the conversion of BMW 80 . The hydrolyzed residues (HRs) were neutrally sulfonated cooking. 57.72g/L and 88.16g/L lignosulfonate concentration, respectively, were harvested from HR 80 and HR 120 , and 42.6±0.5% lignin were removed. The subsequent solid residuals were purified to produce cellulose and then this material was acid-hydrolyzed to produce cellulose nanocrystals. The BMW 120 maintained smaller particle size and aspect ratio during each step of during the multiple processes, while the average aspect ratio of its cellulose nanocrystals was larger. The crystallinity of both materials increased with each step of wet processing, reaching to 74% for the cellulose. Copyright © 2017 Elsevier Ltd. All rights reserved.

Techno-economic and ex-ante environmental assessment of C6 sugars production from spruce and corn. Comparison of organosolv and wet milling technologies

NARCIS (Netherlands)

Moncada, Jonathan; Vural Gursel, Iris; Huijgen, Wouter J J; Dijkstra, Jan Wilco; Ramírez, Andrea

2018-01-01

This study assesses the techno-economic and environmental performance of C6 sugars production from softwood (spruce) and corn. Two technologies were considered in the assessment: organosolv of spruce woodchips (2nd generation) and corn wet milling (1st generation). Process models were developed to

Supply optimization for the production of raw sugar

DEFF Research Database (Denmark)

Grunow, Martin; Günther, H.O.; Westinner, R.

2007-01-01

Based on a case study from Venezuela, the production of raw sugar is investigated. Ideally, sugar mills operate at a constant production rate. However, safety stocks of the raw material cannot be maintained as sugar cane quality deteriorates very rapidly. Sugar cane is therefore continuously...

Case studies on sugar production from underutilized woody biomass using sulfite chemistry

Science.gov (United States)

J.Y. Zhu; M. Subhosh Chandra; Roland Gleisner; William Gilles; Johnway Gao; Gevan Marrs; Dwight Anderson; John Sessions

2015-01-01

We examined two case studies to demonstrate the advantages of sulfite chemistry for pretreating underutilized woody biomass to produce sugars through enzymatic saccharification. In the first case study, we evaluated knot rejects from a magnesium-basedsulfite mill for direct enzymatic sugar production.We found that the sulfite mill rejects are an excellent feedstock for...

Economic feasibility study of an electric generation project from bagasse gasification in a cuban sugar mill

International Nuclear Information System (INIS)

Torres Fernández, Alfredo; Almazán del Olmo, Oscar; Hernández, Bárbara

2015-01-01

Some solid fuels which are very pollutant and with low value could be transformed into a clean gas that could be used in many industrial applications for its physical properties and for being easy transported. Then, electricity generation is one of the most important applications. In this case, electricity could be generated, cleanly and efficiently, through the use of synthesis gas that replaces the natural gas in a combined cycle (Biomass Integrated Gasification Combined Cycle (BIGCC)).In this paper, we carry out an economic feasibility study of the project about the implementation of Biomass Integrated Gasification Combined Cycle (BIGCC) in a 10000 tc/d sugar mill from bagasse gasification in order to demonstrate, from the economic point of view, the possibility of investment in this kind of technology considering the current conditions of Cuban sugar industry.Later, a sensitivity analysis is presented to show first, the break-even point associated to the project and second, the variations of financial indicators due to changes on the total amount of investments, which is a very helpful element for making right decisions in the project investment process. (author)

The economic feasibility of sugar beet biofuel production in central North Dakota

International Nuclear Information System (INIS)

Maung, Thein A.; Gustafson, Cole R.

2011-01-01

This study examines the financial feasibility of producing ethanol biofuel from sugar beets in central North Dakota. Under the Energy Independence and Security Act (EISA) of 2007, biofuel from sugar beets uniquely qualifies as an 'advanced biofuel'. EISA mandates production of 21 billion gallons of advanced biofuels annually by 2022. A stochastic simulation financial model was calibrated with irrigated sugar beet data from central North Dakota to determine economic feasibility and risks of production for 0.038 hm 3 y -1 (or 10 MGY (Million Gallon per Year) and 0.076 hm 3 y -1 (or 20 MGY) ethanol plants. Study results indicate that feedstock costs, which include sugar beets and beet molasses, account for more than 70 percent of total production expenses. The estimated breakeven ethanol price for the 0.076 hm 3 y -1 plant is $400 m -3 ($1.52 per gallon) and $450 m -3 ($1.71 per gallon) for the 0.038 hm 3 y -1 plant. Breakeven prices for feedstocks are also estimated and show that the 0.076 hm 3 y -1 plant can tolerate greater ethanol and feedstock price risks than the 0.038 hm 3 y -1 plant. Our results also show that one of the most important factors that affect investment success is the price of ethanol. At an ethanol price of $484.21 m -3 ($1.84 per gallon), and assuming other factors remain unchanged, the estimated net present value (NPV) for the 0.076 hm 3 y -1 plant is $41.54 million. By comparison, the estimated NPV for the 0.038 hm 3 y -1 plant is only $8.30 million. Other factors such as changes in prices of co-products and utilities have a relatively minor effect on investment viability. -- Highlights: → Sugar beets and beet molasses costs account for more than 70 percent of total production expenses. → The estimated breakeven ethanol prices for the 0.076 hm 3 y -1 and 0.038 hm 3 y -1 ethanol plants are $400 m -3 and $450 m -3 respectively. → The price of ethanol will be one of the most important factors for determining the future feasibility of a

Integration of Succinic Acid Production in a Dry Mill Ethanol Facility

Energy Technology Data Exchange (ETDEWEB)

None

2006-08-01

This project seeks to address both issues for a dry mill ethanol biorefinery by lowering the cost of sugars with the development of an advanced pretreatment process, improving the economics of succinic acid (SA), and developing a model of an ethanol dry mill to evaluate the impact of adding different products and processes to a dry mill.

Modelación matemática de la flotación de la maza superior de los molinos de caña de azúcar // Mathematical model for instant flotation of top shaft in sugar cane mills

Directory of Open Access Journals (Sweden)

Mario Javier Cabello‐Ulloa

2012-01-01

Full Text Available En el presente trabajo se desarrolla un modelo matemático de la flotación de la maza superior de losmolinos de caña de azúcar durante su funcionamiento, determinado a partir de medicionesexperimentales de dicha magnitud en el tiempo. Se realiza un ajuste adecuado a los valores medidosexperimentalmente y se obtiene una función analítica que permitirá considerar los efectos de la flotaciónen el estudio del funcionamiento y en los métodos de cálculo de los molinos y sus elementos. Se aplica aun molino en el Complejo Agroindustrial 14 de Julio en Cienfuegos. Se modelan cien segundos defuncionamiento obteniéndose una función que expresa la flotación la que al ser derivada permite obtenerla velocidad y aceleración con que varía la flotación instantánea. Los coeficientes y sus bondades sondados matricialmente para todos los ajustes efectuados al construir la función que define la flotacióninstantánea obtenida en este caso.Palabras claves: molino de caña de azúcar, flotación instantánea, modelación, cinemática del molino._________________________________________________________________AbstractA mathematical model for the instant flotation of the top shaft of sugar cane mill is developed andanalytical function for introduce in the study of other sugar cane mills parts is obtained. The model isapplied to July 14th sugar factory in Cienfuegos. One hundred seconds of work is modeled and a functionsfor floating, velocity and acceleration of floating are obtained. The coefficients and their goodness aregiven in matrix for all the fits made for to build the function that defines the instant flotation obtained in thiscase.Key words: sugar cane mill, instant flotation, modeling, mill kinematics.

Hydrogen photo-evolution by Rhodopseudomonas palustris 6A using pre-treated olive mill wastewater and a synthetic medium containing sugars

International Nuclear Information System (INIS)

Pintucci, Cristina; Padovani, Giulia; Giovannelli, Alessio; Traversi, Maria Laura; Ena, Alba; Pushparaj, Benjamin; Carlozzi, Pietro

2015-01-01

Highlights: • Adsorbent matrices to convert fresh olive mill wastewater (OMW F ) in feedstock. • Dry-Azolla and granular active carbon for adsorbing polyphenols from OMW F . • Photofermentative processes for biohydrogen production. • Culture mixing by means of an impeller or a magnetic stir bar. • A 30% of dephenolised OMW containing medium suits the photofermentative process. - Abstract: Increasing costs of petroleum, associated with the escalating problems of global climate change, require always greater efforts in order to produce an energy carrier as bioH 2 . In this study, bioH 2 production using photofermentative process was investigated. Two culture broths were used: (a) a synthetic medium rich in sugars (glucose and fructose) and (b) a pre-treated fresh olive-mill wastewater (OMW F ) diluted with water (30%, v:v). The pre-treatment was carried out using two different vegetable matrices (dry-Azolla and granular active carbon) to decrease both the content of polyphenols and the dark colour of wastewater. Rhodopseudomonas palustris 6A isolated from soil spread with OMW was utilized for batch growth experiments, carried out indoors under continuous light (200 μE/m 2 /s). When synthetic medium was used, the culture mixing was performed using either (i) a magnetic stir bar, and (ii) an impeller equipped with five turbines. The latter system made it possible to increase the bioH 2 photo-evolution by 1.4 times. The specific hydrogen photo-evolution rate was 13.5 mL/g(dw)/h in the broth containing diluted OMW F and 11.8 mL/g(dw)/h in the synthetic medium containing sugars (glucose and fructose)

Novel micronized woody biomass process for production of cost-effective clean fermentable sugars.

Science.gov (United States)

Fu, Yu; Gu, Bon-Jae; Wang, Jinwu; Gao, Johnway; Ganjyal, Girish M; Wolcott, Michael P

2018-03-29

Thermo-chemical pretreatments of biomass typically result in environmental impacts from water use and emission. The degradation byproducts in the resulting sugars can be inhibitory to the activities of enzymes and yeasts. The results of this study showed that combining existing commercial comminution technology can reduce total energy consumption with improved saccharification yield while eliminating chemical use. Impact mill was found to be the most efficient milling for size reduction of forest residual chips from ca. 2 mm to a specific value below 100 µm. The further micronization effectively disrupted the recalcitrance of the woody biomass and produced the highly saccharifiable substrates for downstream processing. In addition, extrusion can be integrated into a clean cellulosic sugar process for further fibrillation in place of the conventional mixing processing. The highest energy efficiency was observed on the impact-milled samples with 0.515 kg sugars kWh -1 . Copyright © 2018 Elsevier Ltd. All rights reserved.

Pyrolysis and thermal oxidation kinetics of sugar mill press mud

International Nuclear Information System (INIS)

Gangavati, P.B.; Safi, M.J.; Singh, A.; Prasad, B.; Mishra, I.M.

2005-01-01

Press mud, a solid waste obtained from the sugar mills, has the potential of energy generation through pyrolysis and gasification. The paper reports its proximate and ultimate analyses, deformation and fusion ash temperatures, lower and higher heating values, physico-chemical and thermal degradation in nitrogen and air atmospheres. The thermal degradation was conducted in a thermogravimetric analyzer from room temperature to 900 deg C at heating rates of 20 and 40 K min -1 . The thermogravimetric, derivative thermogravimetric and differential thermal analyses were carried out to determine the rate of volatiles evolution, the effect of heating rates on the thermal degradation characteristics and to determine the global mass loss kinetics of thermal degradation. The thermal degradation was found to occur in several distinct phases: each phase giving volatile evolution in an independent parallel lump. Each decomposition phase was modeled by a single irreversible reaction with respect to the solid mass. Global mass loss kinetics was also determined for the entire decomposition process, as if occurring in one single step. The integral and differential techniques were used for the determination of kinetic parameters. Using the method of Agrawal and Sivasubramanian [R.K. Agrawal, M.S. Sivasubramanian, AIChE J. 33 (1987) 7] for the total degradation zone, the orders of reaction were found in the range of 1.00-2.50 in both the atmospheres (i.e. nitrogen and air) and the activation energy in the range of 27.84-33.44 and 57.41-88.92 kJ mol -1 in nitrogen and air, respectively. The pre-exponential factor was found in the range of 32.1-95.1 and 5.10 x 10 4 to 5.46 x 10 9 min -1 in nitrogen and air atmospheres, respectively

Modelación del contacto entre dos pares de dientes en las coronas de molinos de caña//Modeling of contact between two pairs of teeth in the sugar cane mills gears

Directory of Open Access Journals (Sweden)

Abdel Mendoza‐Fernández

2013-09-01

Full Text Available En el trabajo se propone un mecanismo equivalente para la modelación del funcionamiento de las coronas de molino de caña de azúcar cuando teóricamente hay dos pares de dientes en contacto. A través del análisis de movilidad del mecanismo se demuestra que no es posible el contacto simultaneo entre dos pares de dientes y que el coeficiente de recubrimiento en estos engranes es igual o menor que la unidad. A partir de los resultados del análisis cinemático del contacto entre un par de dientes, y combinándolo con la modelación del contacto entre dos pares de dientes se demuestra que el coeficiente de recubrimiento real en estos engranajes es menor que la unidad y se producen impactos entre los dientes al inicio del contacto.Palabras claves: molinos de caña, coronas de molinos, coeficiente de recubrimiento, engranajes._________________________________________________________________________________AbstractThe paper proposes an equivalent mechanism for modeling the functioning of the crowns of sugar cane mill when theoretically there are two pairs of teeth in contact. Through mobility analysis of the mechanism is demonstrated that is not possible the simultaneous contact between two pairs of teeth and that the coating coefficient of these gears is equal or less than unity. Combining kinematic analysis results for the contact between a pair of teeth with the modeling the contact between two pairs of teeth, it is demonstrated that gear ratio of these gears is less than unity and impacts occur between the teeth at the start of contact.Key words: sugar cane mills, sugar cane mills gears, contact ratio, gears.

Modelación matemática del funcionamiento de las coronas de molinos considerando la flotación de la maza superior // An equivalent mechanism for the kinetic and dynamic analysis of the sugar cane mill gears

Directory of Open Access Journals (Sweden)

Mario Javier Cabello-Ulloa

2011-08-01

Full Text Available ResumenEn este trabajo se propone un mecanismo equivalente para modelar el funcionamiento de lascoronas de los molinos de caña de azúcar, que permite tomar en cuenta la forma real del perfil de losdientes trazados por arcos de círculos y la variación de la distancia entre centros durante sufuncionamiento. Aplicando el método grafo-analítico al modelo propuesto se obtiene una funcióncinemática que define la posición angular instantánea de la corona conducida con dependencia de ladistancia entre ejes de las ruedas y la posición angular de la corona conductora. Aplicando métodosparamétricos se obtienen ecuaciones para la velocidad y aceleración que son generales paracualquier tipo de perfil de dientes en engranajes que trabajan con variación de distancia entrecentros. Finalmente se grafican estos parámetros para el funcionamiento de las coronas de unmolino real concluyéndose que estas tienen relación de transmisión instantánea variable y que por elsolo hecho de la forma del perfil se producen aceleraciones.Palabras claves: corona de molino, engranaje, mecanismo plano, modelación, cinemática del molino.______________________________________________________________________AbstractEquivalent mechanism is proposed for modeling sugar cane mills gears, which allows to take intoaccount the shape of the tooth profile formed by circular arcs and the variation of the distancebetween centers for operation. Applying the graph-analytical method to the proposed model isobtained a function to define the instantaneous angular position of the sugar cane mill gear in relationwith the instantaneous angular position of driver gear and the center distance of gears. Generalequations for the velocity and acceleration for any type of gear tooth profile with variable distancebetween centers are proposed through parametric method. Plotted these parameters for real sugarcane mill gear and it is concluded that the instantaneous speed ratio is variable

Prospective evaluation for the sugar cane factory transformation in biorefinery

International Nuclear Information System (INIS)

Rodríguez Plaza, Rocío; Armas Martínez, Ana Celia de; Rodríguez Carvajal, Lily Elena; García Orozco, Yamila; Torres, Alfredo

2015-01-01

The present work has as goal to evaluate prospectively alternative of transformation in the '5 de Septiembre' sugar industry, located in Cienfuegos, for a superfine alcohol biorefinery. Two alternatives were taking into account; the first one was the installation of a distillery for a capacity of 500 hl/d of superfine alcohol, using the molasses and 10% of the filters juice coming from the sugar mill, as complement of the stage of fermentation, and also a plant of biodiesel production starting from microalgae biomass and of mud separated in the sugar mill and another installation of a distillery for a similar capacity of 500 Hl/d of superfine ethanol using molasses, the filters juices and microalgae hydrolysate. For the second alternative, it intends a distillery where saving of 67 % for the molasses, and 22.73 % for the water, these results are experimentally obtained. The most feasible alternative obtain 5 years of payback period, 21 % of an IRR and U$D 37104 419.21 of NPV. (author)

Assessment of Cane Yields on Well-drained Ferralsols in the Sugar-cane Estate of Central Cameroon

Directory of Open Access Journals (Sweden)

Van Ranst, E.

1999-01-01

Full Text Available The potential yields of irrigated and of rainfed sugar-cane on three ferrallitic soil series, well represented in the Nkoteng sugar-cane estate of Central Cameroon, are estimated following different methods. The potential yield of irrigated sugar-cane is estimated from the total maximum evapotranspiration during the crop cycle. The potential yield of rainfed sugar-cane is estimated following two methods for the establishment of a water balance and for the determination of a yield reduction as a result of a water deficit. The calculated potential yields are higher than the observed ones. The yield reduction due to rain fed cropping can mainly be attributed to water shortage during the late yield formation and the ripening periods. A supplementary yield decline is due to a combined action of an acid soil reaction, a possible Al-toxicity a low base saturation, an inadequate CEC, organic matter content and P-availability which may adequately explain the actual yield level.

Case study: Preliminary assessment of integrated palm biomass biorefinery for bioethanol production utilizing non-food sugars from oil palm frond petiole

International Nuclear Information System (INIS)

Abdullah, Sharifah Soplah Syed; Shirai, Yoshihito; Ali, Ahmad Amiruddin Mohd; Mustapha, Mahfuzah; Hassan, Mohd Ali

2016-01-01

Highlights: • Fermentable sugars production from oil palm frond by integrated technology concept. • Bioethanol production from oil palm frond sugars in a biorefinery. • Palm oil mills have sufficient excess energy and steam to support biorefinery. • The net energy ratio of bioethanol from oil palm frond petiole is 7.48. - Abstract: In this case study, a preliminary assessment on the bioethanol production from oil palm frond (OPF) petiole sugars within an integrated palm biomass biorefinery was carried out. Based on the case study of 4 neighbouring palm oil mills, approximately 55,600 t/y of fermentable sugars could be obtained from OPF petiole. The integrated biorefinery will be located at one of the 4 mills. The mill has potential excess energy comprising 3.64 GW h/y of electricity and 177,000 t/y of steam which are sufficient to run the biorefinery. With 33.9 million litres/y of bioethanol production, the specific production cost of bioethanol is estimated at $ 0.52/l bioethanol, compared to $ 0.31–0.34/l bioethanol produced from sugarcane and $ 0.49–0.60/l bioethanol from other lignocellulosics. The net energy ratio of 7.48 for bioethanol production from OPF provides a promising alternative for OPF utilization as a non-food sugar feedstock.

PROSPECTIVE EVALUATION FOR THE SUGAR CANE FACTORY TRANSFORMATION IN BIOREFINERY

Directory of Open Access Journals (Sweden)

Rocío Rodríguez Plaza

2015-10-01

Full Text Available The present work has as goal to evaluate prospectively alternative of transformation in the "5 de Septiembre" sugar industry, located in Cienfuegos, for a superfine alcohol biorefinery. Two alternatives were taking into account; the first one was the installation of a distillery for a capacity of 500 hl/d of superfine alcohol, using the molasses and 10% of the filters juice coming from the sugar mill, as complement of the stage of fermentation, and also a plant of biodiesel production starting from microalgae biomass and of mud separated in the sugar mill and another installation of a distillery for a similar capacity of 500 Hl/d of superfine ethanol using molasses, the filters juices and microalgae hydrolysate. For the second alternative, it intends a distillery where saving of 67 % for the molasses, and 22.73 % for the water, these results are experimentally obtained. The most feasible alternative obtain 5 years of payback period, 21 % of an IRR and U$D 37104 419.21 of NPV.

Energy saving in the sugar cane agroindustry; Ahorro de energia en la agroindustria azucarera canera

Energy Technology Data Exchange (ETDEWEB)

Zedillo Ponce de Leon, Luis [Grupo de paises Latinoamericanos y del Caribe exportadores de azucar (Mexico)

1996-07-01

The traditional sugar mill is inefficient from the energy point of view. Most of the sugar mills were designed to use all the available bagasse, due to the risk of spontaneous ignition and environmental pollution. Consequently, the steam generators, the turbines and other components were designed to work with low efficiencies. Each ton of sugar produced generates a power potential equivalent to four to six oil barrels (bagasse and residues). That is to say, a sugar mill is capable of producing 500 ton/day of sugar, equivalent to an oil well of 2000 to 3000 barrels/day and one thermoelectric power plant of 15,000 kW. Under this context an analysis is made of the sugar mills in Latin America and the Caribbean as one of the ways of increasing their efficiency and obtain great energy savings. As far as steam generation the appropriate use of energy is dictated by the boilers' efficiency. [Spanish] El ingenio azucarero tradicional es ineficiente desde el punto de vista energetico. La mayoria de los ingenios azucareros se disenaron para usar todo el bagazo disponible, debido al riesgo de ignicion espontanea y contaminacion. En consecuencia, los generadores de vapor, las turbinas y demas componentes fueron disenados para trabajar con bajas eficiencias. Cada tonelada de azucar producida genera una potencialidad energetica equivalente de cuatro a seis barriles de petroleo (bagazo y residuos). Es decir, un ingenio capaz de producir 500 ton/dia de azucar equivalente a un pozo de petroleo de 2000 a 3000 barriles/dia y una termoelectrica de 15000 kW. Bajo este contexto se hace un analisis del ingenio azucarero en Latinoamerica y el Caribe como una de las vias para incrementar su eficiencia y lograr grandes ahorros en la energia. En cuanto a generacion de vapor se refiere, el buen uso de la energia viene expresado por la eficiencia de las calderas.

Fossil energy savings potential of sugar cane bio-energy systems

DEFF Research Database (Denmark)

Nguyen, Thu Lan T; Hermansen, John Erik; Sagisaka, Masayuki

2009-01-01

One important rationale for bio-energy systems is their potential to save fossil energy. Converting a conventional sugar mill into a bio-energy process plant would contribute to fossil energy savings via the extraction of renewable electricity and ethanol substituting for fossil electricity...... and gasoline, respectively. This paper takes a closer look at the Thai sugar industry and examines two practical approaches that will enhance fossil energy savings. The first one addresses an efficient extraction of energy in the form of electricity from the excess bagasse and cane trash. The second while...... proposing to convert molasses or sugar cane to ethanol stresses the use of bagasse as well as distillery spent wash to replace coal in meeting ethanol plants' energy needs. The savings potential achieved with extracting ethanol from surplus sugar versus current practice in sugar industry in Thailand amounts...

Cogeneration alternatives in sugar and alcohol industries. Case of study; Alternativas de cogeracao na industria sucro-alcooleira. Estudo de caso

Energy Technology Data Exchange (ETDEWEB)

Sanchez Prieto, Mario Gabriel

2003-07-01

In the present work, a cogeneration system of sugar-alcohol cane mill is evaluated. Using the Exergetic Cost Theory, a thermo economic analysis is made for the crop corresponding to the year 2000. Previously a detailed energetic analysis was made in order to determine of the first law efficiency for steam boilers and the fuel consumption involved. The first and second law equipment's efficiencies were calculated as well as some performance criteria of the overall system. The fundamental aim of the evaluation was to obtain the cost of the principal fluxes of the system, considering a discount rate of 15 % and a capital recovery period of fifteen years for the energetic equipment in the sugar mill for the monetary cost calculations. In the analysis, was included the sugar mill juice extraction system as a control volume in order to determine the variation in the bagasse cost and its influence in the cost of other fluxes. A Thermodynamic analysis is also made, in which the increase of thermodynamic parameters is studied as a way of improving the fuel economy in Sugar Mill Factories focusing the electric energy obtained in the different alternatives. Diverse strategies are discussed, and as a result, the thermodynamic evaluations of two Proposals of Steam Cogeneration Systems are accomplished as well as the calculations of the exergetic cost. (author)

Cogeneration alternatives in sugar and alcohol industries. Case of study; Alternativas de cogeracao na industria sucro-alcooleira. Estudo de caso

Energy Technology Data Exchange (ETDEWEB)

Sanchez Prieto, Mario Gabriel

2003-07-01

In the present work, a cogeneration system of sugar-alcohol cane mill is evaluated. Using the Exergetic Cost Theory, a thermo economic analysis is made for the crop corresponding to the year 2000. Previously a detailed energetic analysis was made in order to determine of the first law efficiency for steam boilers and the fuel consumption involved. The first and second law equipment's efficiencies were calculated as well as some performance criteria of the overall system. The fundamental aim of the evaluation was to obtain the cost of the principal fluxes of the system, considering a discount rate of 15 % and a capital recovery period of fifteen years for the energetic equipment in the sugar mill for the monetary cost calculations. In the analysis, was included the sugar mill juice extraction system as a control volume in order to determine the variation in the bagasse cost and its influence in the cost of other fluxes. A Thermodynamic analysis is also made, in which the increase of thermodynamic parameters is studied as a way of improving the fuel economy in Sugar Mill Factories focusing the electric energy obtained in the different alternatives. Diverse strategies are discussed, and as a result, the thermodynamic evaluations of two Proposals of Steam Cogeneration Systems are accomplished as well as the calculations of the exergetic cost. (author)

Generation and export of electric energy by sugar and alcohol plants; Geracao e exportacao de energia eletrica por usinas sucroalcooleiras

Energy Technology Data Exchange (ETDEWEB)

Queiroz, Gil Mesquita de Oliveira Rabello; Paschoareli Junior, Dionizio; Faria Junior, Max Jose de Araujo [Universidade Estadual Paulista (DEE/UNESP), Ilha Solteira, SP (Brazil). Dept. de Engenharia Eletrica. Grupo de Pesquisa em Fontes Alternativas e Aproveitamento de Energia Eletrica

2008-07-01

This paper presents technical aspects necessary to allow a sugar-cane mill, which promotes cogeneration, to operate as an electrical energy producer. Changes and optimization in the process to produce alcohol and sugar-cane, which results in the increase of electrical energy to export are discussed. A case of a sugarcane mill, working as a thermoelectric power plant is presented. The necessary components to generate energy and to connect the thermoelectric plant to the main transmission system are described. (author)

77 FR 54607 - Proclaiming Certain Lands, Sugar Parcel Lands, as an Addition to the Bay Mills Indian Reservation...

Science.gov (United States)

2012-09-05

..., as an Addition to the Bay Mills Indian Reservation for the Bay Mills Indian Community of Michigan... acres, more or less, to be added to the Bay Mills Indian Reservation for the Bay Mills Indian Community... the land described below. The land was proclaimed to be an addition to the Bay Mills Indian...

Produção de açúcar e álcool vs. responsabilidade social corporativa: as ações desenvolvidas pelas usinas de cana-de-açúcar frente às externalidades negativas Sugar and ethanol production vs. corporative social responsibility: the actions taken by the sugar cane mills confronted with negative externalizations

Directory of Open Access Journals (Sweden)

Ivelise Rasera Bragato

2008-04-01

Full Text Available A responsabilidade social corporativa (RSC é analisada neste estudo no ambiente organizacional das usinas de cana-de-açúcar paulistas que integram o agronegócio brasileiro de açúcar e álcool. Trata-se de uma pesquisa qualitativa que utiliza dados quantitativos para fins descritivos. Apoiada em dados secundários e primários, aborda-se um estudo exploratório no contexto das usinas de cana-de-açúcar do Estado de São Paulo. O objetivo geral foi estabelecer uma análise comparativa entre as externalidades negativas e as ações sociais e verificar se estas últimas tinham um papel compensatório. Foi possível identificar a relação entre imagem e RSC no cenário organizacional das usinas, ressaltando as principais ações sociais desenvolvidas pelas empresas, as quais vêm contribuindo para a melhoria da imagem do setor sucroalcooleiro como agente participante do desenvolvimento sustentável. Constatou-se que o foco das ações sociais está concentrado nas áreas educacional e ambiental, ocupando um plano secundário as ações relacionadas à cultura, ao esporte e à saúde. Os resultados demonstraram que o número de projetos sociais não está necessariamente relacionado ao porte das empresas pesquisadas.Corporative Social Responsibility (CSR is analyzed in this study in the organizational environment of sugar cane mills in the state of São Paulo and which form the Brazilian agribusiness of sugar and ethanol. Following a qualitative research, the quantitative data was used to define objectives using the primary and secondary data approach; an exploratory study in the context of the sugar-ethanol mills. The goal was to establish a comparative analysis between the negative external aspects and the social actions to investigate whether the latter had a significant role. It was possible to identify the relation between image and CSR in the organizational scenario of sugar-ethanol mills highlighting the main social actions developed by

FAILURE ANALYSIS IN TUBING OF AIR PREHEATER OF BOILER FROM A SUGARCANE MILL

Directory of Open Access Journals (Sweden)

Joner Oliveira Alves

2014-10-01

Full Text Available The increased demand for energy from sugarcane bagasse has made the sugar and alcohol mills search alternatives to reduce maintenance of the boilers, releasing more time to the production. The stainless steel use has become one of the main tools for such reduction. However, specification errors can lead to premature failures. This work reports the factors that led tubes of AISI 409 stainless steel fail after half season when applied in a air preheater of boiler from a sugarcane mill. In such application, the AISI 304 lasts about 15 seasons and the carbon steel about 3. A tube sent by the sugar mill was characterized by wet chemical analysis, optical microscopy and EDS. Results indicated chloride formation on the internal walls of the tube, which combined with the environment, accelerated the corrosion process. The carbon steel showed high lifetime due to a 70% higher thickness. Due to the work condictions is recommended the use of stainless steels with higher corrosion resistance, such as the traditional AISI 304 or the ferritic AISI 444, the last presents better thermal exchange.

Economical impact of the BIG/CC technology use on the sugar cane industry

Energy Technology Data Exchange (ETDEWEB)

Queiroz, L.C. de; Nascimento, M.J.M. do [Brascep Engenharia Ltda., Rio de Janeiro (Brazil)

1993-12-31

The use of biomass as primary fuel for power and steam production using modern conversion technology such as the Biomass Integrated Gas Turbine/Combined Cycle (BIG/CC) has both technical and commercial potential. Brazil is implementing a BIG/CC Demonstration Plant to burn wood from eucalyptus short rotation forest and to test sugar cane bagasse as feedstock. The purpose of this project is to demonstrate the commercial viability of using biomass as a feedstock for power generation, its suitability for applications in developing countries, and the possibilities it offers for commercial activities in regions which currently have a low level of economic activities. The purpose of this paper is to show the potential applicability of this technology in the sugar cane industries of Developing Countries such as Brazil. The same quantity of sugar cane already processed in each sugar mill can produce sizable quantities of electric power at competitive costs, in addition to the traditional products -- sugar and/or ethanol, which will cause an economical impact, duplicating the revenue of these industries. The application of the BIG/CC technology in the Sugar Cane Industry may lead to the following scenario in developing countries: (1) power shall be produced at very competitive prices by specialized private firms associated with sugar mills; (2) plant sizes will be smaller -- 15 to 100 MW -- when based on biomass, a compared to large fossil fuel plants now prevailing; (3) ethanol and sugar production costs will be reduced due to more efficient and economical processes and due to the additional revenue from power production; (4) becoming more competitive with gasoline, ethanol production tends to increase, which will influence the automobile industry and improve the quality of life in big cities.

Flour mill stream blending affects sugar snap cookie and Japanese sponge cake quality and oxidative cross-linking potential of soft white wheat.

Science.gov (United States)

Ramseyer, Daniel D; Bettge, Arthur D; Morris, Craig F

2011-01-01

The purpose of this research was to study the functional differences between straight grade (75% extraction rate) and patent (60% extraction rate) flour blends from 28 genetically pure soft white and club wheat grain lots, as evidenced by variation in sugar snap cookie and Japanese sponge cake quality. Functional differences were examined relative to arabinoxylan content, protein content, and oxidative cross-linking potential of flour slurries. Oxidative cross-linking measurements were obtained on flour slurries with a low shear Bostwick consistometer and considered endogenous oxidative cross-linking potential (water alone) or enhanced oxidative cross-linking potential (with added hydrogen peroxide-peroxidase). A 2-way ANOVA indicated that flour blend was the greater source of variation compared to grain lot for all response variables except water-extractable arabinoxylan content. Patent flours produced larger sugar snap cookies and Japanese sponge cakes, and contained significantly less total and water-unextractable arabinoxylans, protein, and ash than did straight grade flours. Patent flours produced more viscous slurries for endogenous and enhanced cross-linking measurements compared to the straight grade flours. The functional differences between patent and straight grade flours appear to be related to the particular mill streams that were utilized in the formulation of the 2 flour blends and compositional differences among those streams. Journal of Food Science © 2011 Institute of Food Technologists® No claim to original US government works.

Chemistry Based on Renewable Raw Materials: Perspectives for a Sugar Cane-Based Biorefinery

Directory of Open Access Journals (Sweden)

Murillo Villela Filho

2011-01-01

Full Text Available Carbohydrates are nowadays a very competitive feedstock for the chemical industry because their availability is compatible with world-scale chemical production and their price, based on the carbon content, is comparable to that of petrochemicals. At the same time, demand is rising for biobased products. Brazilian sugar cane is a competitive feedstock source that is opening the door to a wide range of bio-based products. This essay begins with the importance of the feedstock for the chemical industry and discusses developments in sugar cane processing that lead to low cost feedstocks. Thus, sugar cane enables a new chemical industry, as it delivers a competitive raw material and a source of energy. As a result, sugar mills are being transformed into sustainable biorefineries that fully exploit the potential of sugar cane.

Steam consumption minimization model in a multiple evaporation effect in a sugar plant

International Nuclear Information System (INIS)

Villada, Fernando; Valencia, Jaime A; Moreno, German; Murillo, J. Joaquin

1992-01-01

In this work, a mathematical model to minimize the steam consumption in a multiple effect evaporation system is shown. The model is based in the dynamic programming technique and the results are tested in a Colombian sugar mill

Scale up of ethanol production using pulp mill wastewater sludge by cellulase and saccharomyces cerevisiae

International Nuclear Information System (INIS)

Kunchada Sangasintu; Petchporn Chawakitchareon

2010-01-01

This study aimed to evaluate the potential use of pulp mill wastewater sludge as substrate in ethanol production. The simultaneous saccharification and fermentation process was conducted by using Saccharomyces cerevisiae TISTR 5339 under optimum proportion of cellulase and pulp mill wastewater sludge. The ethanol production from cellulosic materials in simultaneous saccharification and fermentation needs cooperation between cellulase and yeast. The cellulase hydrolyzes cellulose to sugar while yeast utilizes sugar to produce ethanol. The pulp mill wastewater sludge has an average content of 73.3 % hemi cellulose, 67.1 % alpha cellulose, 4.7 % beta cellulose and 1.4 % gamma cellulose. The experimental results indicated that the volume of the ethanol tend to increase with time, providing the maximum ethanol yield of 0.69 g/g on the 7"t"h day, the last day of the experiment. The ethanol production was scaled up in 5 L fermentor under optimum proportion and increased the fermentation period. It was found that the ethanol production gave the maximum ethanol yield of 1.14 g/g on the 9"t"h day of the totally 13 days experimentation. These results showed that the cellulose from pulp mill wastewater sludge was as effective substrate for ethanol production and alternative energy for the future. (author)

Biotechnological applications for the utilisation of wastes from palm oil mills

Energy Technology Data Exchange (ETDEWEB)

Cheah, S C; Ma, A N; Ooi, L C.L.; Ong, A S.H.

1988-05-01

The milling of oil palm fruits produces about two-and-a-half to three times as much effluent as oil does. It also generates a large amount of lignocellulosic wastes, mainly in the form of empty fruit bunches, press cake fibres and nut shell. Research efforts at PORIM have been directed towards the utilisation of these wastes as a means to solve the problem of environmental pollution as well as for the generation of economic returns for the mills. We have studied a thermophilic contact process for the anaerobic digestion of palm oil mill effluent and its potential for generating biogas for energy uses. Our work has also shown that the condensate derived from the fruit sterilisation process during milling is amenable to fermentation for the production of single cell protein (SCP) and exo-enzymes. The enzymes produced have been applied for oil clarification, oil recovery from press cake fibers and saccharification of the fibers for the production of sugar feedstocks. This paper will also introduce the concept of integrated waste management for the palm oil mill through the implementation of these technologies.

Fossil energy savings potential of sugar cane bio-energy systems

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Thu Lan T. [Department of Agroecology, Aarhus University, Tjele (Denmark); The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi, Bangkok (Thailand); Hermansen, John E. [Department of Agroecology, Aarhus University, Tjele (Denmark); Sagisaka, Masayuki [Institute of Science for Safety and Sustainability, National Institute of Advanced Industrial Science and Technology, Tsukuba (Japan)

2009-11-15

One important rationale for bio-energy systems is their potential to save fossil energy. Converting a conventional sugar mill into a bio-energy process plant would contribute to fossil energy savings via the extraction of renewable electricity and ethanol substituting for fossil electricity and gasoline, respectively. This paper takes a closer look at the Thai sugar industry and examines two practical approaches that will enhance fossil energy savings. The first one addresses an efficient extraction of energy in the form of electricity from the excess bagasse and cane trash. The second while proposing to convert molasses or sugar cane to ethanol stresses the use of bagasse as well as distillery spent wash to replace coal in meeting ethanol plants' energy needs. The savings potential achieved with extracting ethanol from surplus sugar versus current practice in sugar industry in Thailand amounts to 15 million barrels of oil a year. Whether the saving benefits could be fully realized, however, depends on how well the potential land use change resulting from an expansion of ethanol production is managed. The results presented serve as a useful guidance to formulate strategies that enable optimum utilization of biomass as an energy source. (author)

Passa-se uma engenhoca: ou como se faziam transações com terras, engenhos e crédito em mercados locais e imperfeitos (freguesia de Campo Grande, Rio de Janeiro, séculos XVIII e XIX 'Engenhocas' to sell!: or lands, sugar mills and credit’s trade in local and imperfect markets (Campo Grande civil parish, Rio de Janeiro, Brazil, XVIII-XIX centuries

Directory of Open Access Journals (Sweden)

Manoela Pedroza

2010-06-01

Full Text Available A questão central deste artigo é perceber como as hierarquias sociais e as políticas específicas do Antigo Regime nos Trópicos se refletiram em estratégias concretas, e compreender as engrenagens locais de um mercado imperfeito. Analisaremos as escolhas e trajetórias de agentes envolvidos em transações com terras, engenhos e concessão de crédito na freguesia de Campo Grande, no correr do século XVIII até o início do XIX, cuja especificidade foi conseguirem reproduzir sua condição senhorial. Metodologicamente, partimos da microanálise e compusemos redes sociais locais que sustentaram as estratégias dos agentes em questão. Propomos que as rendas criadas a partir das vendas a prazo, os vínculos pessoais entre compradores-credores-vendedores-devedores nas vendas dos engenhos e a sobreposição de vínculos de dependência locais foram fatores que possibilitaram a acumulação econômica e a reprodução ampliada da condição senhorial.Using the concept of ‘Ancien Régime on the Tropics’, this article aims to investigate how social hierarchies and politics in Brazil, during the 18th century, reflected into concrete local strategies. Our objective is to understand the gadgets of an imperfect market, based on agents’ choices who were all involved in lands, sugar mills and credit commercial transactions in the Campo Grande civil parish, in the Rio de Janeiro. All agents had gotten to reproduce its extended senhorial condition. Our methodology is based on microanalysis, so we composed local social nets we guest had supported the agents’ strategies in question. We consider strategies to achieve long term incomes; bonds between purchaser, creditor, salesman and debtors (both involving sugar mills commercial transactions; the overlapping of dependence bonds by strategic exchanges created by sugar mill masters among consanguineous, matrimonial and fictitious relatives had been factors that made possible the economic accumulation

Development of hemicelluloses biorefineries for integration into kraft pulp mills

Science.gov (United States)

Ajao, Olumoye Abiodun

The development and wide spread acceptance of production facilities for biofuels, biochemicals and biomaterials is an important condition for reducing reliance on limited fossil resources and transitioning towards a global biobased economy. Pulp and paper mills in North America are confronted with high energy prices, high production costs and intense competition from emerging economies and low demand for traditional products. Integrated forest biorefineries (IFBR) have been proposed as a mean to diversify their product streams, increase their revenue and become more sustainable. This is feasible because they have access to forest biomass, an established feedstock supply chain and wood processing experience. In addition, the integration of a biorefinery process that can share existing infrastructure and utilities on the site of pulp mill would significantly lower investment cost and associated risks. Kraft pulping mills are promising receptor processes for a biorefinery because they either possess a prehydrolysis step for extracting hemicelluloses sugars prior to wood pulping or it can be added by retrofit. The extracted hemicelluloses could be subsequently transformed into a wide range of value added products for the receptor mill. To successfully implement hemicelluloses biorefinery, novel processes that are technically and economically feasible are required. It is necessary to identify products that would be profitable, develop processes that are energy efficient and the receptor mill should be able to supply the energy, chemicals and material demands of the biorefinery unit. The objective of this thesis is to develop energy efficient and economically viable hemicelluloses biorefineries for integration into a Kraft pulping process. A dissolving pulp mill was the reference case study. The transformation of hemicellulosic sugars via a chemical and biochemical conversion pathway, with furfural and ethanol as representative products for each pathway was studied. In

Process for whole cell saccharification of lignocelluloses to sugars using a dual bioreactor system

Science.gov (United States)

Lu, Jue [Okemos, MI; Okeke, Benedict [Montgomery, AL

2012-03-27

The present invention describes a process for saccharification of lignocelluloses to sugars using whole microbial cells, which are enriched from cultures inoculated with paper mill waste water, wood processing waste and soil. A three-member bacterial consortium is selected as a potent microbial inocula and immobilized on inedible plant fibers for biomass saccharification. The present invention further relates the design of a dual bioreactor system, with various biocarriers for enzyme immobilization and repeated use. Sugars are continuously removed eliminating end-product inhibition and consumption by cell.

Incorporated residues to sugar cone during the industrial processing evaluated by neutron activation analysis

International Nuclear Information System (INIS)

Nadai Fernandes, E.A. de; Bacchi, M.A.

1990-01-01

In the Brazilian sugar and alcohol industry a modern agronomic and industrial technology has been developed during the last years, due to the high demand for sugarcane. The intensive harvest mechanization has increased the soil levels in the cane delivered to the mills despite of the introduced washing systems. Electric welding has been used to recuperate the rollers of the mill and other metallic components thus increasing the contents of metals in the processed material. Samples of cane, juice and bagasse were colected at several points of the milling tandem and submitted to neutron activation analysis. The concentrations of Fe, Cr, Co, Zn, Br and Cs showed an increment through the mill, indicating the contribution of the rollers wear. Sc and the rare earth elements La, Ce, Sm and Eu had about the same levels in all samples, therefore they must have come with the soil adhered to the cane. (author)

Effect of steam pretreatment on oil palm empty fruit bunch for the production of sugars

International Nuclear Information System (INIS)

Shamsudin, Saleha; Md Shah, Umi Kalsom; Zainudin, Huzairi; Abd-Aziz, Suraini; Mustapa Kamal, Siti Mazlina; Shirai, Yoshihito; Hassan, Mohd Ali

2012-01-01

Lignocellulose into fuel ethanol is the most feasible conversion route strategy in terms of sustainability. Oil palm empty fruit bunch (EFB) generated from palm oil production is a huge source of cellulosic material and represents a cheap renewable feedstock which awaits further commercial exploitation. The purpose of this study was to investigate the feasibility of using steam at 0.28 MPa and 140 °C generated from the palm oil mill boiler as a pretreatment to enhance the digestibility of EFB for sugars production. The effects of steam pretreatment or autohydrolysis on chemical composition changes, polysaccharide conversion, sugar production and morphology alterations of four different types of EFB namely fresh EFB (EFB1), sterilized EFB (EFB2), shredded EFB (EFB3) and ground EFB (EFB4) were evaluated. In this study, the effects of steam pretreatment showed major alterations in the morphology of EFB as observed under the scanning electron microscope. Steam pretreated EFB2 was found to have the highest total conversion of 30% to sugars with 209 g kg −1 EFB. This production was 10.5 fold higher than for EFB1 and 1.6 fold and 1.7 fold higher than EFB3 and EFB4, respectively. The results suggested that pretreatment of EFB by autohydrolysis using steam from the mill boiler could be considered as being a suitable pretreatment process for the production of sugars. These sugars can be utilized as potential substrates for the production of various products such as fuel ethanol. -- Highlights: ► We investigate the feasibility of steam pretreatment to enhance digestibility of EFB. ► Steam pretreatment increased sugars to 3.4 fold and caused major alteration in EFB morphology under SEM. ► Autohydrolysis which does not require the addition of chemicals is an attractive pretreatment approach to EFB.

Enhancing the enzymatic hydrolysis of corn stover by an integrated wet-milling and alkali pretreatment.

Science.gov (United States)

He, Xun; Miao, Yelian; Jiang, Xuejian; Xu, Zidong; Ouyang, Pingkai

2010-04-01

An integrated wet-milling and alkali pretreatment was applied to corn stover prior to enzymatic hydrolysis. The effects of NaOH concentration in the pretreatment on crystalline structure, chemical composition, and reducing-sugar yield of corn stover were investigated, and the mechanism of increasing reducing-sugar yield by the pretreatment was discussed. The experimental results showed that the crystalline structure of corn stover was disrupted, and lignin was removed, while cellulose and hemicellulose were retained in corn stover by the pretreatment with 1% NaOH in 1 h. The reducing-sugar yield from the pretreated corn stovers increased from 20.2% to 46.7% when the NaOH concentration increased from 0% to 1%. The 1% NaOH pretreated corn stover had a holocellulose conversion of 55.1%. The increase in reducing-sugar yield was related to the crystalline structure disruption and delignification of corn stover. It was clarified that the pretreatment significantly enhanced the conversion of cellulose and hemicellulose in the corn stover to sugars.

Production of sugar and alcohol: financial and operational strategies

Directory of Open Access Journals (Sweden)

Celma de Oliveira Ribeiro

2014-12-01

Full Text Available This article proposes the construction of an optimization model to define the product portfolio of a sugarcane mill, taking into account operational and financial aspects. It is considered that the revenue earned by a producer comes from the sale of sugar and alcohol in the physical market and the results obtained through hedging in the derivatives market of sugar. Employing CVaR (Conditional Value-at-Risk, as the risk measure, the model allows the construction of an efficient frontier and, according to the producer's risk tolerance, defines the optimal strategy of production (production mix and activity in the derivatives market (hedge ratio. Through the model the article also seeks to analyze the advantage of using the options market in the construction of financial hedging strategies in agricultural commodities markets.

Injuries to Scots pine mycorrhizas and chemical gradients in forest soil in the environment of a pulp mill in Central Finland

International Nuclear Information System (INIS)

Holopaininen, T.; Heinonen-Tanski, H.; Halonen, A.

1996-01-01

The occurrence and condition of Scots pine mycorrhizas were studied at different distances from a pulp mill in Central Finland. The chemical analyses of the soil humus layer in the vicinity of the mill revealed increased levels of ammonium-nitrogen, sulphur and calcium but unaltered concentrations of phosphorus and magnesium. Higher nitrate levels and nitrification were clearly detected at some sites which had recently been limed. Significant decreases in root ramification index and number of living mycorrhizas were found in a 0-0.6 km zone surrounding the factory but these parameters increased with increasing distance. Within a 2 km zone around the mill there were abundant Cenococcum geophilus and Paxilus involutus-type mycorrhizas while lowered frequencies of several other mycorrhizal types were detected. An ultrastructural study revealed changes in several types of mycorrhizas, the clearest of which were increased tannin deposition in cortical cells, intracellular growth of hyphae in cortical cells and the appearance of electron dense accumulations in the vacuoles of the funal cells. The ultrastructural changes observed were distributed at least to a distance of 3 km from the mill and occurred in the roots of trees that had only a slight loss of needle mass. Nitrogen deposition is suspected to be the primary cause of root decline but atmospheric SO 2 through the tree crown is also likely to be a contributing factor. 37 refs., 10 figs., 7 tabs

Automation of Raw sugar Crystallizer tacho of Central Julio Antonio Mella

Directory of Open Access Journals (Sweden)

Mónica Mulet-Hing

2016-04-01

Full Text Available This paper treats about the analysis of the actual  situation and prospects for solutions that permit economical and efficient automation in the area of Tachos of Sugar Company Julio Antonio Mella, as part of the "Supervisory Control Systems", for the first level of automation in this industry, performing the proposed automation in the central area of cans by PLCs .This proposal arises from the need to improve the crystallization process tacho 5 of that area, since it has no automation, that is, everything is done manually, which will bring undoubtedly a quality improvement the final product. The structure and control system variables are defined, proving the feasibility of the proposed solution. The essential result of the work involves the submission of a proposal of automation that has the structure of a control algorithm, taking into account the requirements, technical resources for implementation, the variables that must be observed and processed, as well as elements of final action; the respective field instrumentation is proposed, to perform satisfactorily the control with the minimum possible investment.

Prospects of sugarcane milling waste utilization for hydrogen production in India

International Nuclear Information System (INIS)

Singh, S.P.; Asthana, R.K.; Singh, A.P.

2007-01-01

Cane-sugar producing countries also generate sufficient waste (bagasse) that is mostly utilized ''on-site'' as a replacement to coal in specialized boilers. In addition to sugar and molasses, about 25% by-product of the cane milling is bagasse that still retains 2.5% sugar on dry wt. basis.This paper deals with the prospects of bagasse fermentation for hydrogen production. It seems relevant, as India and Brazil are the major sugarcane producers in the world. The results obtained confirm bagasse, annually generated to a tune of 40 Mt (million tons) in India, can be diverted from the conventional burning or composting to fermentative hydrogen production in a cost-effective way. The processing cost of bagasse for hydrogen production (3Nm 3 ) equivalent to 1L petrol is about half. The system optimization for accessibility of polysaccharides in bagasse and the use of genetically efficient bacterial strains for agrowaste-based hydrogen production seems the ideal option for clean energy generation

Sugars profiles of different chestnut (Castanea sativa Mill.) and almond (Prunus dulcis) cultivars by HPLC-RI.

Science.gov (United States)

Barreira, João C M; Pereira, José Alberto; Oliveira, M Beatriz P P; Ferreira, Isabel C F R

2010-03-01

Sugar profiles of different almond and chestnut cultivars were obtained by high-performance liquid chromatography (HPLC), by means of a refractive index (RI) detector. A solid-liquid extraction procedure was used in defatted and dried samples. The chromatographic separation was achieved using a Eurospher 100-5 NH(2) column using an isocratic elution with acetonitrile/water (70:30, v/v) at a flow rate of 1.0 ml/min. All the compounds were separated in 16 min. The method was optimized and proved to be reproducible and accurate. Generally, more than 95% of sugars were identified for both matrixes. Sugars profiles were quite homogeneous for almond cultivars; sucrose was the main sugar (11.46 +/- 0.14 in Marcona to 22.23 +/- 0.59 in Ferragnes g/100 g of dried weight), followed by raffinose (0.71 +/- 0.05 in Ferraduel to 2.11 +/- 0.29 in Duro Italiano), glucose (0.42 +/- 0.12 in Pegarinhos two seeded to 1.47 +/- 0.19 in Ferragnes) and fructose (0.11 +/- 0.02 in Pegarinhos two seeded to 0.59 +/- 0.05 in Gloriette). Commercial cultivars proved to have higher sucrose contents, except in the case of Marcona. Nevertheless, chestnut cultivars revealed a high heterogeneity. Sucrose was the main sugar in Aveleira (22.05 +/- 1.48), Judia (23.30 +/- 0.83) and Longal (9.56 +/- 0.91), while glucose was slightly prevalent in Boa Ventura (6.63 +/- 0.49). The observed variance could serve for inter-cultivar discrimination.

The influence of milling on the dissolution performance of simvastatin

DEFF Research Database (Denmark)

Zimper, Ulrike; Aaltonen, Jaakko; Krauel-Goellner, Karen

2012-01-01

properties such as solubility and dissolution rate and, therefore, process induced solid state modifications need to be monitored. The aim of this study was two-fold: firstly, to investigate the dissolution rates of milled and unmilled simvastatin; and secondly, to screen for the main milling factors......, as well as factor interactions in a dry ball milling process using simvastatin as model drug, and to optimize the milling procedure with regard to the opposing responses particle size and process induced disorder by application of a central composite face centered design. Particle size was assessed...... by scanning electron microscopy (SEM) and image analysis. Process induced disorder was determined by partial least squares (PLS) regression modeling of respective X-ray powder diffractograms (XRPD) and Raman spectra. Valid and significant quadratic models were built. The investigated milling factors were...

Programação estocástica robusta aplicada ao planejamento agregado de safra em usinas cooperadas do setor sucroenergético Stochastic robust optimization model applied to the aggregate production planning in mill cooperative socities in the sugar-energy sector

Directory of Open Access Journals (Sweden)

Rafael Piatti Oiticica de Paiva

2011-01-01

Full Text Available Neste trabalho, apresenta-se um modelo de programação estocástica robusta aplicado ao planejamento agregado da produção em usinas cooperadas do setor sucroenergético. Esta modelagem considera a relação hierárquica existente entre o planejamento anual da cooperativa e o planejamento tático de safra das usinas cooperadas, além de contemplar importantes incertezas existentes nos parâmetros de entrada do modelo. Para resolver os problemas de programação linear e programação inteira mista envolvidos, utiliza-se uma linguagem de modelagem algébrica e um software de última geração de programação matemática. Os resultados computacionais obtidos são comparados aos resultados da modelagem determinística PASUC, discutida em Paiva e Morabito (in press, utilizando os mesmos dados do estudo de caso da Usina Santa Clotilde e da Cooperativa Regional dos Produtores de Açúcar e Álcool de Alagoas.This work presents a stochastic robust optimization model applied to the aggregate production planning in mill cooperative societies in the sugar-energy sector This mathematical model is based on a hierarchical relationship between the annual planning of the cooperative and the tactical planning horizon of the sugarcane mills taking into account important uncertainties in several parameters of this model. In order to solve the linear and mixed integer programming problems involved, an optimization modeling language solver was used. Computational results are presented and compared with the deterministic approach PASUC, dicussed by Paiva e Morabito (in press using the same data from the case studies conducted in the Santa Clotilde milling company and in the regional cooperative society of sugar and ethanol producers of Alagoas.

Wastewater disposal to landfill-sites: a synergistic solution for centralized management of olive mill wastewater and enhanced production of landfill gas.

Science.gov (United States)

Diamantis, Vasileios; Erguder, Tuba H; Aivasidis, Alexandros; Verstraete, Willy; Voudrias, Evangelos

2013-10-15

The present paper focuses on a largely unexplored field of landfill-site valorization in combination with the construction and operation of a centralized olive mill wastewater (OMW) treatment facility. The latter consists of a wastewater storage lagoon, a compact anaerobic digester operated all year round and a landfill-based final disposal system. Key elements for process design, such as wastewater pre-treatment, application method and rate, and the potential effects on leachate quantity and quality, are discussed based on a comprehensive literature review. Furthermore, a case-study for eight (8) olive mill enterprises generating 8700 m(3) of wastewater per year, was conceptually designed in order to calculate the capital and operational costs of the facility (transportation, storage, treatment, final disposal). The proposed facility was found to be economically self-sufficient, as long as the transportation costs of the OMW were maintained at ≤4.0 €/m(3). Despite that EU Landfill Directive prohibits wastewater disposal to landfills, controlled application, based on appropriately designed pre-treatment system and specific loading rates, may provide improved landfill stabilization and a sustainable (environmentally and economically) solution for effluents generated by numerous small- and medium-size olive mill enterprises dispersed in the Mediterranean region. Copyright © 2013 Elsevier Ltd. All rights reserved.

Economic analyse of industrial production and electric energy consumption on a sugar-alcohol plant; Analise economica da producao industrial e do consumo de energia eletrica em uma usina sucro-alcooleira

Energy Technology Data Exchange (ETDEWEB)

Bini, Aderson

1993-10-01

Economic aspects of industrial production of sugar cane and automotive alcohol fuel, the relation between its production and electric energy consumption, electric energy costs to self generated electric power and concessionary supply, involved in plant production on Ribeirao Preto, SP, Brazil, are presented. Studies to verify the relationships between sugar and alcohol production with milling ours as well as sugar cane processed with sugar and alcohol produced are also discussed 27 refs., 12 figs., 38 tabs.

Ferti-irrigational impact of sugar mill effluent on agronomical characteristics of Phaseolus vulgaris (L.) in two seasons.

Science.gov (United States)

Kumar, Vinod; Chopra, A K

2014-11-01

Ferti-irrigation response of 5, 10, 25, 50, 75, and 100 % concentrations of the sugar mill effluent (SME) on French bean (Phaseolus vulgaris L., cv. Annapurna) in the rainy and summer seasons was investigated. The fertigant concentrations produced significant (P potassium (K(+)), calcium (Ca(2+)), magnesium (Mg(2+)), total Kjeldahl nitrogen (TKN), phosphate (PO4 (3-)), sulfate (SO4 (2-)), ferrous (Fe(2+)), cadmium (Cd), chromium (Cr), copper (Cu), manganese (Mn), and zinc (Zn), in both seasons. The contents of Cr, Cu, Mn, and Zn except Cd were found to be below the maximum levels permitted for soils in India. The agronomic performance of P. vulgaris was gradually increased at lower concentrations, i.e., from 5 to 25 %, and decreased at higher concentrations, i.e., from 50 to 100 %, of the SME in both seasons when compared to controls. The accumulations of heavy metals were increased in the soil and P. vulgaris from 5 to 100 % concentrations of the SME in both seasons. The contents of Cu, Mn, and Zn except Cd and Cr were noted under the permissible limit of Food and Agriculture Organization (FAO)/World Health Organization (WHO) standards. Most contents of biochemical components like crude proteins, crude fiber, and total carbohydrates were found with 25 % concentration of the SME in both seasons. The contamination factor (Cf) of various metals was in the order of Cd > Cr > Zn > Mn > Cu for soil and Mn > Zn > Cu > Cr > Cd for P. vulgaris in both seasons after fertigation with SME. Therefore, the SME can be used to improve the soil fertility and yield of P. vulgaris after appropriate dilution.

South African Sugar Technologists' Association. Proceedings of the fifty-ninth annual congress held at Durban and Mount Edgecombe, 17 to 21 June 1985

International Nuclear Information System (INIS)

1985-01-01

This publication presents the proceedings of the fifty-ninth annual congress of the South African Sugar Technologists' Association, held in Durban and Mount Edgecombe, from 17 to 21 June 1985. Almost every facet of the sugar industry is covered including topics such as milling, irrigation, growth, crystal elongation and crystal size distribution, pans, stirrers and boilers used in the industry, evaporation, sucrose losses, radiometric and other gauges, the use of x-ray techniques and chemical methods of analysis, diseases, cooling waters, refining, maintenance, efficiency, operation, production and performance of a sugar station

Sugar signals and the control of plant growth and development

NARCIS (Netherlands)

Lastdrager, Jeroen|info:eu-repo/dai/nl/357520076; Hanson, Johannes|info:eu-repo/dai/nl/304822299; Smeekens, Sjef|info:eu-repo/dai/nl/072489995

2014-01-01

Sugars have a central regulatory function in steering plant growth. This review focuses on information presented in the past 2 years on key players in sugar-mediated plant growth regulation, with emphasis on trehalose 6-phosphate, target of rapamycin kinase, and Snf1-related kinase 1 regulatory

Visual Inspection for Breakage of Micro-milling Cutter

Directory of Open Access Journals (Sweden)

WANG Lei

2014-11-01

Full Text Available In order to realize visual inspection for breakage of micro-milling cutter, a developed image acquisition method of the surface of a micro-milling cutter was constructed and a classification method based on multilayer neural network was proposed in this article. While the milling cutter was rotating at a constant speed, a camera was triggered by a rotary encoder to capture a series of images. And the developed image of milling cutter was created by image mosaic algorithms. The moment of regional feature as well as the gray feature of the tooth edge was extracted as the input vector of neural network. The feature vector includes moment of inertia, geometric central moment, three-dimensional invariants moment and the gray value of the projection on two principal axis directions of the tooth region. By designing a proper neural network, breakage defects can be detected 100 %. And the false discovery rate is 0.5 %.

Effect of amendments on chemical immobilization of heavy metals in sugar mill contaminated soils

Directory of Open Access Journals (Sweden)

Mohammad Jamal Khan, Muhammad Tahir Azeem and Sajida Perveen1

2012-05-01

Full Text Available A bulk soil sample collected from the vicinity of PSM (Premier Sugar Mill Mardan was amended with diammonium phosphate (DAP, triple super phosphate (TSP, Farm Yard Manure (FYM and poultry manure (PM in 1.5 kg soil in a 2 L plastic pot. Both DAP and TSP were added at 230 mg kg 1 (460 kg ha 1 soil whereas the organic amendments (FYM and PM were added at the rate of 10% by weight of soil. The air dried samples in pots were brought to field moisture content (0.33 bar water content by the addition of either HIE (Hayatabad Industrial Estate or PSM in two separate sets of experiments. The experimental pots were arranged in randomized complete design with three replicates under laboratory conditions during March to May (Temperature varying between 25 to 30 °C. Treated and control pots were incubated for 90 days al 0.33 bar ca 25% moisture and the moisture deficit during the incubation time was adjusted by adding PSM and HIE effluents in their respective set of experimental pots. Soil samples were collected after 15, 30, 45 and 90 d to determine the effect of amendments on AB-DTPA extractable metals. The results showed that AB-DTPA extractable Cd, Or, Cu, Ni and Cd increased significantly with lime and the maximum values were noted after 90 days incubation whereas the Fe, Mn and Zn content in soil increased with time but the increase was not significant. It was further noted that the increase over time in metal was not pronounced when supplied with amendments indicating their ability to chemically stabilize it compared to unamended soils. Higher values of all the heavy metals were noted in unamended soil. By comparing the different amendments, it was observed that FYM was effective in reducing the extractability/phytoavailability of all the metals under study except Pb whereby DAP was most effective as a stabilizing agent in the soil. It was concluded that in calcareous soil, FYM and DAP can be used to reduce the risk of phytotoxicity of heavy metals in

An econometrics method to estimate demand of sugar

Directory of Open Access Journals (Sweden)

Negar Seyed Soleimany

2012-01-01

Full Text Available Sugar is one of the strategic goods in the basket of households in each country and it plays an important role in supplying the required energy. On the other hand, it is one of the goods, which Iranian government is about to change its subsidy strategies. To design useful sugar subsidy strategies, it is necessary to know sugar position in the basket of households and be familiar with households' sugar demand or consumption behavior. This research estimates sugar demand for Iranian households by using time series of 1984-2008, which is taken from central bank of Iran. In this paper, first independent and dependent variables of household sugar demand model are chosen based on the literature review and theory of demand. Then, sugar demand is estimated by OLS technique and linear regression. The preliminary statistical observations such as Durbin-Watson, F statistic and R2 indicate that the regression is admissible. The results seem plausible and consistent with theory and show that sugar demand in Iranian households is associated with household expenditure, relative sugar price, family size and indicate that demand of sugar is affected during the war time. The results also show the income elasticity is 0.8 and price elasticity is -0.2 which means sugar is essential good for Iranian households and is inelastic to price.

Greenhouse gasses emissions and energy balances of a non-vertically integrated sugar and ethanol supply chain: A case study in Argentina

International Nuclear Information System (INIS)

Acreche, Martín M.; Valeiro, Alejandro H.

2013-01-01

In order to address society's concerns regarding the sustainability of sugar and ethanol production and use, this paper calculates the energy and greenhouse gasses (GHG) emissions' balances of a non-vertically integrated sugarcane industry in Tucumán-Argentina. The essential operations involved in the sugar/ethanol production cycle were taken into account. Results show that this industry generated an energy balance of 3.4:1. GHG emissions during sugarcane production were 1824 and 2231 kg CO 2 eq. ha −1 year −1 for low and middle to high farms' technological levels, respectively. The mill process emitted 1187 kg CO 2 eq. ha −1 year −1 . The main factors influencing these balances were gas-oil and nitrogen fertilizers used in the agricultural stage, natural gas consumed by the sugar mill, and sugarcane burning (only for GHG balance). The impact of ethanol use in reducing GHG emissions under the current production scheme (6.8 Mg ha −1 of sugar + 380.9 kg ha −1 of ethanol), in final blends of 95% gasoline and 5% ethanol in vehicles, is negligible. A sensitivity analysis indicates that switching to 100% bagasse used as fuel in mill's boilers, ethanol being produced directly from sugarcane juice, and a final blend of 90% gasoline and 10% ethanol, an amount of 1746 kg CO 2 eq. ha −1 year −1 of GHG emissions could be avoided. - Highlights: ► Energy and GHG emissions' balances for the non-integrated sugar/ethanol industry in Tucumán-Argentina. ► The energy balance was positive, while there were important GHG emissions. ► Factors influencing both balances were gas-oil, N fertilizers, burning and natural gas. ► Ethanol use for reducing GHG emissions in the current production scheme is negligible. ► Results are promising, as the main factors influencing both balances are identified

Value Added Products from Hemicellulose Utilization in Dry Mill Ethanol Plants

Energy Technology Data Exchange (ETDEWEB)

Rodney Williamson, ICPB; John Magnuson, PNNL; David Reed, INL; Marco Baez, Dyadic; Marion Bradford, ICPB

2007-03-30

The Iowa Corn Promotion Board is the principal contracting entity for this grant funded by the US Department of Agriculture and managed by the US Department of Energy. The Iowa Corn Promotion Board subcontracted with New Jersey Institute of Technology, KiwiChem, Pacific Northwest National Lab and Idaho National Lab to conduct research for this project. KiwiChem conducted the economic engineering assessment of a dry-mill ethanol plant. New Jersey Institute of Technology conducted work on incorporating the organic acids into polymers. Pacific Northwest National Lab conducted work in hydrolysis of hemicellulose, fermentation and chemical catalysis of sugars to value-added chemicals. Idaho National Lab engineered an organism to ferment a specific organic acid. Dyadic, an enzme company, was a collaborator which provided in-kind support for the project. The Iowa Corn Promotion Board collaborated with the Ohio Corn Marketing Board and the Minnesota Corn Merchandising Council in providing cost share for the project. The purpose of this diverse collaboration was to integrate the hydrolysis, the conversion and the polymer applications into one project and increase the likelihood of success. This project had two primary goals: (1) to hydrolyze the hemicellulose fraction of the distillers grain (DG) coproduct coming from the dry-mill ethanol plants and (2) convert the sugars derived from the hemicellulose into value-added co-products via fermentation and chemical catalysis.

Effect of the milling conditions on the degree of amorphization of selenium by milling in a planetary ball mill

International Nuclear Information System (INIS)

Ksiazek, K; Wacke, S; Gorecki, T; Gorecki, Cz

2007-01-01

The effect of the milling parameters (rotation speed of the milling device and duration of milling) on the phase composition of the products of milling of fully crystalline selenium has been investigated. The milling was conducted using a planetary micromill and the phase composition of the milling products was determined by differential thermal analysis. It has been found that ball milling leads to the partial amorphization of the starting crystalline material. The content of amorphous phase in the milling products depends, in a rather complicated way, on the milling parameters. At the milling parameters adopted in the present study, the milling product was never fully amorphous. The complicated way the milling parameters affect the content of amorphous phase in the milling products is a result of competition of two processes: amorphization due to deformation and refinement of grains of milled material and crystallization of the already produced amorphous material at the cost of heat evolved in the milling vial during the milling process

Effect on Caries of Restricting Sugars Intake

Science.gov (United States)

Moynihan, P.J.; Kelly, S.A.M.

2014-01-01

A systematic review of studies in humans was conducted to update evidence on the association between the amount of sugars intake and dental caries and on the effect of restricting sugars intake to caries to inform the updating of World Health Organization guidelines on sugars consumption. Data sources included MEDLINE, EMBASE, Cochrane Database, Cochrane Central Register of Controlled Trials, Latin American and Caribbean Health Sciences, China National Knowledge Infrastructure, Wanfang, and South African Department of Health. Eligible studies reported the absolute amount of sugars and dental caries, measured as prevalence, incidence, or severity. The review was conducted and reported in accordance with the PRISMA statement, and the evidence was assessed according to GRADE Working Group guidelines. From 5,990 papers identified, 55 studies were eligible – 3 intervention, 8 cohort, 20 population, and 24 cross-sectional. Data variability limited meta-analysis. Of the studies, 42 out of 50 of those in children and 5 out of 5 in adults reported at least one positive association between sugars and caries. There is evidence of moderate quality showing that caries is lower when free-sugars intake is caries risk throughout the life course. PMID:24323509

The electricity cogeneration in sugar mills and alcohol and the reduction of emissions of greenhouse gases

International Nuclear Information System (INIS)

Valdés Delgado, Antonio

2015-01-01

Electric power in Cuba currently produces -in high proportion- plants employing fossil fuel. The price of fossil fuels and the negative influence on the environment by emissions of greenhouse gases, has indicated the need to develop other energy sources. Biomass sugarcane provides ample opportunities to produce this energy with positive economic and environmental results. The technological process for the production of sugar requires the use of mechanical energy, low power consumption compared to thermal energy requirements and their use at low pressures determine the possibility of implementing a cogeneration system of mechanical, thermal and electrical energy. The power consumption for the driving equipment of a factory is about 15-30 kw-kr / ton rod. The amount of electrical energy generated in a sugar cane factory is sufficient to meet their own needs, being able to obtain an additional amount for supply to the public network and meet the needs of other productions as is alcohol. Agricultural crop residues (RAC) and sugarcane bagasse and a liquid fuel: alcohol and gaseous fuel: different energy possibilities derived from the sugar industry reflected in the disposal of solid fuels such as is the biogas. The preparation of solid, liquid and gaseous fuels from sugar and alcohol production avoids the use of fossil fuels such as gasoline and fuel oil and gas enables not be sent into the atmosphere that impact on the greenhouse effect. (full text)

Um modelo de otimização para o planejamento agregado da produção em usinas de açúcar e álcool An optimization model for the aggregate production planning in alcohol and sugar mills

Directory of Open Access Journals (Sweden)

Rafael Piatti Oititica de Paiva

2007-04-01

Full Text Available Neste trabalho apresentamos um modelo de otimização para o planejamento agregado da produção de usinas de açúcar e álcool. Este modelo se baseia nos modelos clássicos de seleção de processos e dimensionamento de lotes para representar o sistema de produção de açúcar, álcool e melaço, incluindo decisões da etapa agrícola, das fases de corte, carregamento e transporte de cana e, principalmente, decisões de moagem, escolha do processo produtivo e estoque dos produtos finais. As decisões são tomadas em períodos semanais e o horizonte de planejamento são as semanas de safra. Para resolver o modelo de programação linear inteira mista resultante, utilizamos a linguagem de modelagem GAMS e o solver CPLEX. Um estudo de caso foi realizado em uma usina de açúcar e álcool do estado de Alagoas. Neste estudo foi possível verificar a adequação do modelo proposto quando aplicado para auxiliar nas decisões envolvidas no planejamento agregado da produção de empresas deste tipo. Resultados computacionais são apresentados resolvendo um exemplo com dados de uma safra típica.The main concern of this work is related to the presentation of an aggregate production planning model of a sugar and alcohol milling company. The mathematical model is based on the process selection model and the production lot-sizing model, and aims to help the decision makers in the production planning and control process of determining the quantity of sugarcane crushed, the selection of sugarcane suppliers, the selection of sugarcane transport system suppliers, the selection of industrial process used in the sugar, alcohol and molasses production and the storage decisions related to these final products. The decisions are taken on a weekly basis and the planning horizon is the whole sugarcane harvesting season. To solve the mixed integer mathematical problem found in this model, we applied the GAMS modeling language and the CPLEX solver. A case study was

The Value of the Freshwater Snail Dip Scoop Sampling Method in Macroinvertebrates Bioassessment of Sugar Mill Wastewater Pollution in Mbandjock, Cameroon

Directory of Open Access Journals (Sweden)

Emmanuel Noumi

2008-03-01

Full Text Available Macroinvertebrates identification and enumeration may be used as a simple and affordable alternative to chemical analysis in water pollution monitoring. However, the ecological responses of various taxa to pollution are poorly known in resources-limited tropical countries. While freshwater macroinvertebrates have been used in the assessment of water quality in Europe and the Americas, investigations in Africa have mainly focused on snail hosts of human parasites. There is a need for sampling methods that can be used to assess both snails and other macroinvertebrates. The present study was designed to evaluate the usefulness of the freshwater snail dip scoop method in the study of macroinvertebrates for the assessment of the SOSUCAM sugar mill effluents pollution. Standard snail dip scoop samples were collected upstream and downstream of the factory effluent inputs, on the Mokona and Mengoala rivers. The analysis of the macroinvertebrate communities revealed the absence of Ephemeroptera and Trichoptera, and the thriving of Syrphidae in the sections of the rivers under high effluent load. The Shannon and Weaver diversity index was lower in these areas. The dip scoop sampling protocol was found to be a useful method for macroinvertebrates collection. Hence, this method is recommended as a simple, cost-effective and efficient tool for the bio-assessment of freshwater pollution in developing countries with limited research resources.

BUSINESS OPPORTUNITIES OF CITRIC ACID PRODUCTION BY FERMENTATION FROM SUGAR SUBSTRATES IN CUBA

Directory of Open Access Journals (Sweden)

Omar Pérez Navarro

2016-04-01

Full Text Available A proposal for opportunities of citric acid production in Cuba, using sources of sugar substrates such as refined sugar, molasses and whey, by submerged fermentation with Aspergillus niger, where a technology is established from the selected substrate which is provided and the microorganism used. This is a demanding process in terms of investment costs and operation where the best combinations of productivity and cost are achieved with molasses followed by refined sugar and whey. For the selected substrate, the mass and energy balance in each of the steps in the process of obtaining citric acid for different productive capacities of citric acid was made and the minimum economic size of 2.5 t / day was determined. A production capacity of 8 t / day of granulated acid (2 640 t / a, with estimated total investment of $ 9,068,713, NPV = $ 1,401,561, IRR = 27% and DPP = 3 years was selected. The project is resistant to the rising price of raw materials and the cost of electricity and is favored when the process is integrated into a sugar mill cogeneration, while it is sensitive to a reduction in the selling price of the product.

Rentabilidad de la gestión del mantenimiento en los centrales azucareros cubanos. // Profitability of maintenance management in Cuban sugar cane factories.

Directory of Open Access Journals (Sweden)

C. Batista Rodríguez

2001-10-01

Full Text Available Para evaluar de forma acertada la eficiencia de la gestión de mantenimiento en un central azucarero y a su personaldirectivo es necesario disponer de indicadores cuantitativos que reflejen los resultados y la evolución integral del trabajotécnico-organizativo y económico de la actividad. Actualmente existen gran cantidad de indicadores, pero se adolece de lano existencia de un indicador generalizador de la eficiencia de la gestión del mantenimiento, por lo cual es difícil valorarcorrectamente los resultados y la evolución integral de la actividad.En este trabajo se muestra la posibilidad de evaluar de forma integral la eficiencia de la gestión del mantenimiento en loscentrales azucareros cubanos, con el calculo del indicador Rentabilidad de la gestión del mantenimiento (Rgm.Palabras claves: Rentabilidad, gestión de mantenimiento, centrales azucareros, indicador de rentabilid__________________________________________________________________AbstractIn order to evaluate in a proper manner the efficiency of maintenance management in sugar cane factories and its directivepersonnel, it is necessary to have quantitative indicators that reflect the results and integral evolution of the technicalorganizationaland economic work of the activity. At the present a great amount of indicators exists, but it is sympathizedfrom the non-existence of a generalizing indicator of the maintenance management efficiency, thus it is difficult tocorrectly validate the results and integral evolution of the activity. In this paper is expose the possibility of integralevaluation of the maintenance management efficiency in Cuban sugar cane factories, with the computation of the indicatorof maintenance management profitability (Rgm.Key words: Profitability, maintenance management, sugar cane factories, profitability indicator.

The Role of Promotion in Milling and Bakery Products Sales

Directory of Open Access Journals (Sweden)

Sergiu-Bogdan Constantin

2009-07-01

Full Text Available Irrespective of the avenue chosen for the retail of milling and bakery products, a key role in sales growth is the one played by promotion, information of the future customers as to the characteristics of the products, the execution and sale conditions. Such information process takes place by means of the promotional mix, consisting of a blend of advertising, sales promotion, public relations tools, trademarks, promotional events, and sales forces. The milling and baking industry uses, to certain extent, all the components of the promotional mix. Product promotion is central both to sales growth, as well as to educating, advising and informing consumers as to how they can select quality milling and bakery products.

Uranium milling costs

International Nuclear Information System (INIS)

Coleman, R.B.

1980-01-01

Basic process flowsheets are reviewed for conventional milling of US ores. Capital costs are presented for various mill capacities for one of the basic processes. Operating costs are shown for various mill capacities for all of the basic process flowsheets. The number of mills using, or planning to use, a particular process is reviewed. A summary of the estimated average milling costs for all operating US mills is shown

Comparison of various milling modes combined to the enzymatic hydrolysis of lignocellulosic biomass for bioenergy production: Glucose yield and energy efficiency

International Nuclear Information System (INIS)

Licari, A.; Monlau, F.; Solhy, A.; Buche, P.; Barakat, A.

2016-01-01

Bagasse is an abundant by-product from sugarcane production that can be used for conversion into biofuels. Nonetheless, the recalcitrant structures of lignocellulosic fibers required a pretreatment prior conversion into biofuels. In this study, four mechanical deconstruction methods were compared in terms of energy demand and energy efficiency at lab scale: BM (ball mill), VBM (vibratory ball mill), CM (centrifugal mill) and JM (jet mill). Results indicate that VBM was more effective compared to BM, JM and CM in enzymatic accessibility and sugars solubilization: VBM-3h > BM-72 h > JM-5000 rpm > CM-0.12 mm. However, preliminary energetic assessment showed that at lab scale, the CM (centrifugal mill) as mechanical fractionation process appears to be the most efficient in terms of energy-efficiency (kg glucose/kWh) compared to BM, VBM and JM. A comparison with literature pretreatments data highlighted that fine and/or ultrafine milling process (BM, VBM, CM) are simpler saccharification technologies, which not required any chemical or water inputs, thus minimizing waste generation and treatment. - Highlights: • VBM (vibro ball milling) was the most effective in decreasing of cellulose crystallinity. • BM (ball milling) was the most effective in increasing surface area. • The highest energy efficiency was obtained with CM (centrifugal milling).

Transcriptional and metabolic effects of glucose on Streptococcus pneumoniae sugar metabolism

Directory of Open Access Journals (Sweden)

Laura ePaixão

2015-10-01

Full Text Available Streptococcus pneumoniae is a strictly fermentative human pathogen that relies on carbohydrate metabolism to generate energy for growth. The nasopharynx colonised by the bacterium is poor in free sugars, but mucosa lining glycans can provide a source of sugar. In blood and inflamed tissues glucose is the prevailing sugar. As a result during progression from colonisation to disease S. pneumoniae has to cope with a pronounced shift in carbohydrate nature and availability. Thus, we set out to assess the pneumococcal response to sugars found in glycans and the influence of glucose (Glc on this response at the transcriptional, physiological and metabolic levels. Galactose (Gal, N-acetylglucosamine (GlcNAc and mannose (Man affected the expression of 8 to 14% of the genes covering cellular functions including central carbon metabolism and virulence. The pattern of end-products as monitored by in vivo 13C-NMR is in good agreement with the fermentation profiles during growth, while the pools of phosphorylated metabolites are consistent with the type of fermentation observed (homolactic vs. mixed and regulation at the metabolic level. Furthermore, the accumulation of α-Gal6P and Man6P indicate metabolic bottlenecks in the metabolism of Gal and Man, respectively. Glc added to cells actively metabolizing other sugar(s was readily consumed and elicited a metabolic shift towards a homolactic profile. The transcriptional response to Glc was large (over 5% of the genome. In central carbon metabolism (most represented category, Glc exerted mostly negative regulation. The smallest response to Glc was observed on a sugar mix, suggesting that exposure to varied sugars improves the fitness of S. pneumoniae. The expression of virulence factors was negatively controlled by Glc in a sugar-dependent manner. Overall, our results shed new light on the link between carbohydrate metabolism, adaptation to host niches and virulence.

Transcriptional and metabolic effects of glucose on Streptococcus pneumoniae sugar metabolism.

Science.gov (United States)

Paixão, Laura; Caldas, José; Kloosterman, Tomas G; Kuipers, Oscar P; Vinga, Susana; Neves, Ana R

2015-01-01

Streptococcus pneumoniae is a strictly fermentative human pathogen that relies on carbohydrate metabolism to generate energy for growth. The nasopharynx colonized by the bacterium is poor in free sugars, but mucosa lining glycans can provide a source of sugar. In blood and inflamed tissues glucose is the prevailing sugar. As a result during progression from colonization to disease S. pneumoniae has to cope with a pronounced shift in carbohydrate nature and availability. Thus, we set out to assess the pneumococcal response to sugars found in glycans and the influence of glucose (Glc) on this response at the transcriptional, physiological, and metabolic levels. Galactose (Gal), N-acetylglucosamine (GlcNAc), and mannose (Man) affected the expression of 8 to 14% of the genes covering cellular functions including central carbon metabolism and virulence. The pattern of end-products as monitored by in vivo (13)C-NMR is in good agreement with the fermentation profiles during growth, while the pools of phosphorylated metabolites are consistent with the type of fermentation observed (homolactic vs. mixed) and regulation at the metabolic level. Furthermore, the accumulation of α-Gal6P and Man6P indicate metabolic bottlenecks in the metabolism of Gal and Man, respectively. Glc added to cells actively metabolizing other sugar(s) was readily consumed and elicited a metabolic shift toward a homolactic profile. The transcriptional response to Glc was large (over 5% of the genome). In central carbon metabolism (most represented category), Glc exerted mostly negative regulation. The smallest response to Glc was observed on a sugar mix, suggesting that exposure to varied sugars improves the fitness of S. pneumoniae. The expression of virulence factors was negatively controlled by Glc in a sugar-dependent manner. Overall, our results shed new light on the link between carbohydrate metabolism, adaptation to host niches and virulence.

Study of factors affecting demand and supply of sugar in Indonesia ...

African Journals Online (AJOL)

This study is aimed at determining: (a) the factors influencing the demand of national sugar, and the price elasticity of demand (ep) and; (b) the factors influencing the supply of national sugar, and the price elasticity of supply (es). The data comprised a time series of 1990-2006, taken from the Central Statistics Bureau, The ...

Genetic improvement of sugar cane for bioenergy: the Brazilian experience in network research with RIDESA

Directory of Open Access Journals (Sweden)

Luiz Alexandre Peternelli

2012-01-01

Full Text Available In this paper, it is presented RIDESA’s model for sugar cane breeding to ethanol, and its scientific, technological and human resources training contributions. RIDESA is an inter-university network for the development of sugar cane industry in Brazil, and was formed by a technical cooperation agreement between ten public universities. The model of network management is presented in this study, which involves, among other things, the public-private partnership (Universities-Mills for the development of cultivars. RIDESA has produced 59 cultivars since 1990 and is now responsible for 59% of the total area cultivated with this plant in Brazil. In the last five years, 286 agronomists were trained in breeding programs at universities that comprise RIDESA. In this same period, the network formed 35 professors, 24 doctors and 7 post-docs in researches with this crop. It is also presented a conceptual approach on methods of sugar cane breeding involving families and genome-wide selection.

Hume, Mill, Hill, and the sui generis epidemiologic approach to causal inference.

Science.gov (United States)

Morabia, Alfredo

2013-11-15

The epidemiologic approach to causal inference (i.e., Hill's viewpoints) consists of evaluating potential causes from the following 2, noncumulative angles: 1) established results from comparative, observational, or experimental epidemiologic studies; and 2) reviews of nonepidemiologic evidence. It does not involve statements of statistical significance. The philosophical roots of Hill's viewpoints are unknown. Superficially, they seem to descend from the ideas of Hume and Mill. Hill's viewpoints, however, use a different kind of evidence and have different purposes than do Hume's rules or Mill's system of logic. In a nutshell, Hume ignores comparative evidence central to Hill's viewpoints. Mill's logic disqualifies as invalid nonexperimental evidence, which forms the bulk of epidemiologic findings reviewed from Hill's viewpoints. The approaches by Hume and Mill cannot corroborate successful implementations of Hill's viewpoints. Besides Hume and Mill, the epidemiologic literature is clueless about a plausible, pre-1965 philosophical origin of Hill's viewpoints. Thus, Hill's viewpoints may be philosophically novel, sui generis, still waiting to be validated and justified.

Fumaric acid production using renewable resources from biodiesel and cane sugar production processes.

Science.gov (United States)

Papadaki, Aikaterini; Papapostolou, Harris; Alexandri, Maria; Kopsahelis, Nikolaos; Papanikolaou, Seraphim; de Castro, Aline Machado; Freire, Denise M G; Koutinas, Apostolis A

2018-04-13

The microbial production of fumaric acid by Rhizopus arrhizus NRRL 2582 has been evaluated using soybean cake from biodiesel production processes and very high polarity (VHP) sugar from sugarcane mills. Soybean cake was converted into a nutrient-rich hydrolysate via a two-stage bioprocess involving crude enzyme production via solid state fermentations (SSF) of either Aspergillus oryzae or R. arrhizus cultivated on soybean cake followed by enzymatic hydrolysis of soybean cake. The soybean cake hydrolysate produced using crude enzymes derived via SSF of R. arrhizus was supplemented with VHP sugar and evaluated using different initial free amino nitrogen (FAN) concentrations (100, 200, and 400 mg/L) in fed-batch cultures for fumaric acid production. The highest fumaric acid concentration (27.3 g/L) and yield (0.7 g/g of total consumed sugars) were achieved when the initial FAN concentration was 200 mg/L. The combination of VHP sugar with soybean cake hydrolysate derived from crude enzymes produced by SSF of A. oryzae at 200 mg/L initial FAN concentration led to the production of 40 g/L fumaric acid with a yield of 0.86 g/g of total consumed sugars. The utilization of sugarcane molasses led to low fumaric acid production by R. arrhizus, probably due to the presence of various minerals and phenolic compounds. The promising results achieved through the valorization of VHP sugar and soybean cake suggest that a focused study on molasses pretreatment could lead to enhanced fumaric acid production.

Mechanical alloying and reactive milling in a high energy planetary mill

International Nuclear Information System (INIS)

Jiang Xianjin; Trunov, Mikhaylo A.; Schoenitz, Mirko; Dave, Rajesh N.; Dreizin, Edward L.

2009-01-01

Powder refinement in a planetary mill (Retsch PM 400-MA) is investigated experimentally and analyzed using discrete element modeling (DEM). Refinement is defined as the average size of the individual components in a composite powder. The specific milling dose, defined as the product of charge ratio and milling time, is used as an experimental parameter tracking the progress of the material refinement. This parameter is determined experimentally for milling of boron and titanium powders, for which the time of initiation of a self-sustained reaction is measured under different milling conditions. It is assumed that the reaction becomes self-sustaining when the same powder refinement is achieved. The DEM calculations established that the milling balls primarily roll along the milling container's perimeter. The inverse of the rate of energy dissipation resulting from this rolling motion is used as the DEM analog of the specific milling dose. The results correlate well with experimental observations.

Arabidopsis scaffold protein RACK1A modulates rare sugar D-allose regulated gibberellin signaling

OpenAIRE

Fennell, Herman; Olawin, Abdulquadri; Mizanur, Rahman M.; Izumori, Ken; Chen, Jin-Gui; Ullah, Hemayet

2012-01-01

As energy sources and structural components, sugars are the central regulators of plant growth and development. In addition to the abundant natural sugars in plants, more than 50 different kinds of rare sugars exist in nature, several of which show distinct roles in plant growth and development. Recently, one of the rare sugars, D-allose, an epimer of D-glucose at C3, is found to suppress plant hormone gibberellin (GA) signaling in rice. Scaffold protein RACK1A in the model plant Arabidopsis ...

Top Value Added Chemicals From Biomass. Volume 1 - Results of Screening for Potential Candidates From Sugars and Synthesis Gas

Science.gov (United States)

2004-08-01

UsesIntermediatesBiomass Feedstocks Sugars Glucose Fructose Xylose Arabinose Lactose Sucrose Starch Starch Cellulose Lignin Oil Protein Hemicellulose...these goals, the Program supports the integrated biorefinery, a processing facility that extracts carbohydrates, oils, lignin , and other materials from...biomass, converts them into multiple products including fuels and high value chemicals and materials. Already today, corn wet and dry mills, and

Sugar-Based Ethanol Biorefinery: Ethanol, Succinic Acid and By-Product Production

Energy Technology Data Exchange (ETDEWEB)

Donal F. Day

2009-03-31

The work conducted in this project is an extension of the developments itemized in DE-FG-36-04GO14236. This program is designed to help the development of a biorefinery based around a raw sugar mill, which in Louisiana is an underutilized asset. Some technical questions were answered regarding the addition of a biomass to ethanol facility to existing sugar mills. The focus of this work is on developing technology to produce ethanol and valuable by-products from bagasse. Three major areas are addressed, feedstock storage, potential by-products and the technology for producing ethanol from dilute ammonia pre-treated bagasse. Sugar mills normally store bagasse in a simple pile. During the off season there is a natural degradation of the bagasse, due to the composting action of microorganisms in the pile. This has serious implications if bagasse must be stored to operate a bagasse/biorefinery for a 300+ day operating cycle. Deterioration of the fermentables in bagasse was found to be 6.5% per month, on pile storage. This indicates that long term storage of adequate amounts of bagasse for year-round operation is probably not feasible. Lignin from pretreatment seemed to offer a potential source of valuable by-products. Although a wide range of phenolic compounds were present in the effluent from dilute ammonia pretreatment, the concentrations of each (except for benzoic acid) were too low to consider for extraction. The cellulosic hydrolysis system was modified to produce commercially recoverable quantities of cellobiose, which has a small but growing market in the food process industries. A spin-off of this led to the production of a specific oligosaccharide which appears to have both medical and commercial implications as a fungal growth inhibitor. An alternate use of sugars produced from biomass hydrolysis would be to produce succinic acid as a chemical feedstock for other conversions. An organism was developed which can do this bioconversion, but the economics of

Remediation of former uranium mining and milling activities in Central Asia

International Nuclear Information System (INIS)

Waggitt, Peter

2007-01-01

Available in abstract form only. Full text of publication follows: Several of the Central Asian countries of the former Soviet Union were involved in the uranium mining and milling industry from about 1945 for varying periods until the break up of the Soviet Union in 1991 and beyond. Some facilities are still producing in Uzbekistan and Kazakhstan. However, before the break up, many facilities had been abandoned and in only a few cases had any remediation been undertaken. Since 1991 the newly independent states of the region have been seeking assistance for the remediation of the multitude of tailings piles, waste rock stockpiles and abandoned, and often semi dismantled, production facilities that may be found throughout the region. Many of these sites are close to settlements that were established as service towns for the mines. Most towns still have populations, although the mining industry has departed. In some instances there are cases of pollution and contamination and in many locations there is a significant level of public concern. The IAEA has been undertaking a number of Technical Cooperation (TC) projects throughout the region for some time to strengthen the institutions in the relevant states and assist them to establish monitoring and surveillance programs as an integral part of the long term remediation process. The IAEA is liaising with other agencies and donors who are also working on these problems to optimise the remediation effort. The paper describes the objectives and operation of the main TC regional program, liaison efforts with other agencies, the achievements so far and the long term issues for remediation of these legacies of the 'cold war' era. (authors)

Phytochemical characterization of the threatened specie Fraxinus caroliniana Mill subsp. cubensis (Griseb. Borhidi

Directory of Open Access Journals (Sweden)

Mabelkis Terry Rosabal

2016-04-01

Full Text Available Fraxinus caroliniana Mill subsp. cubensis (Griseb. Borhidi is commonly known as buffalo, represents an endemic subspecies and categorized as critical danger of extinction in Cuba. This work aimed to characterize the phytochemical composition of plants of F. caroliniana in two localities of the Matanzas province. The presence of secondary metabolites in leaf extracts was qualitatively analyzed and reductive and total sugars were quantified. The results indicated the presence of flavonoids, terpenes, steroids, saponins, tannins and anthraquinones in leaves that could be considered for further systematic studies and application in agriculture. The plants from the Ciénaga de Zapata showed contents of reducing sugars and totals higher than those obtained in the plants of Martí. These results provide information for the identification of characters of possible taxonomic and conservation value in this species.   Keywords: anthraquinons, extracts, swamp ash, steroids, tannins, terpens

Survey of root rot diseases of sugar bett in Central Greece

Directory of Open Access Journals (Sweden)

Karadimos Dimitros A.

2006-01-01

Full Text Available An extensive survey was conducted during the summer and autumn of 2004 in sugar beet fields in the area of Larissa, Thessaly region, with plants showing symptoms of root rot diseases. The aim of the monitoring was to identify the causal agents of root rot diseases. In total, 76 sugar beet fields were surveyed and 5-10 diseased roots were examined from each field. Isolations, carried out on PDA, showed that two main fungal pathogens causing root rot were Rhizoctonia solani and Phytophthora cryptogea. The former was isolated in 46% of the fields and the latter in 38% of the fields. In addition, Rhizopus stolonifer, Fusarium spp., Scerotium rolfsii and Rhizoctonia violacea were isolated in 14%, 7%, 4% and 1% of the fields respectively. In most of the surveyed fields only one pathogen species was isolated and only in a few of them more than one fungal species was identified.

Economic impacts of implementing the new plants to sugar cane; Impactos economicos da implementacao das novas usinas de cana-de-acucar

Energy Technology Data Exchange (ETDEWEB)

Terciote, Ricardo [Universidade Estadual de Campinas (DE/FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia

2006-07-01

The sugar industry goes through an important moment: invest and develop to supply future demand, mainly by fuel alcohol (around 70% of new vehicles sales are from flex fuel models - and the majority of these vehicles are supplied by alcohol). Due to this foreseeable increase of alcohol demand, sugar industry has already announced 41 new projects, which will contribute with the milling of 70 million tons of sugar cane by the conclusion of these plants. In this phase of expansion, the alcohol market must be pressured for the demand, managing the supplying of the domestic and external markets. With this scenario and the possibility of sector growth which has an important role in Brazil development, this work evaluates the economic impacts of the new plants implementation investments. (author)

Short-term exposure to a diet high in fat and sugar, or liquid sugar, selectively impairs hippocampal-dependent memory, with differential impacts on inflammation.

Science.gov (United States)

Beilharz, J E; Maniam, J; Morris, M J

2016-06-01

Chronic high-energy diets are known to induce obesity and impair memory; these changes have been associated with inflammation in brain areas crucial for memory. In this study, we investigated whether inflammation could also be related to diet-induced memory deficits, prior to obesity. We exposed rats to chow, chow supplemented with a 10% sucrose solution (Sugar) or a diet high in fat and sugar (Caf+Sugar) and assessed hippocampal-dependent and perirhinal-dependent memory at 1 week. Both high-energy diet groups displayed similar, selective hippocampal-dependent memory deficits despite the Caf+Sugar rats consuming 4-5 times more energy, and weighing significantly more than the other groups. Extreme weight gain and excessive energy intake are therefore not necessary for deficits in memory. Weight gain across the diet period however, was correlated with the memory deficits, even in the Chow rats. The Sugar rats had elevated expression of a number of inflammatory genes in the hippocampus and WAT compared to Chow and Caf+Sugar rats but not in the perirhinal cortex or hypothalamus. Blood glucose concentrations were also elevated in the Sugar rats, and were correlated with the hippocampal inflammatory markers. Together, these results indicate that liquid sugar can rapidly elevate markers of central and peripheral inflammation, in association with hyperglycemia, and this may be related to the memory deficits in the Sugar rats. Copyright © 2016 Elsevier B.V. All rights reserved.

The Influence of Milling on the Dissolution Performance of Simvastatin

Directory of Open Access Journals (Sweden)

Thomas Rades

2010-12-01

Full Text Available Particle size reduction is a simple means to enhance the dissolution rate of poorly water soluble BCS-class II and IV drugs. However, the major drawback of this process is the possible introduction of process induced disorder. Drugs with different molecular arrangements may exhibit altered properties such as solubility and dissolution rate and, therefore, process induced solid state modifications need to be monitored. The aim of this study was two-fold: firstly, to investigate the dissolution rates of milled and unmilled simvastatin; and secondly, to screen for the main milling factors, as well as factor interactions in a dry ball milling process using simvastatin as model drug, and to optimize the milling procedure with regard to the opposing responses particle size and process induced disorder by application of a central composite face centered design. Particle size was assessed by scanning electron microscopy (SEM and image analysis. Process induced disorder was determined by partial least squares (PLS regression modeling of respective X-ray powder diffractograms (XRPD and Raman spectra. Valid and significant quadratic models were built. The investigated milling factors were milling frequency, milling time and ball quantity at a set drug load, out of which milling frequency was found to be the most important factor for particle size as well as process induced disorder. Milling frequency and milling time exhibited an interaction effect on the responses. The optimum milling settings using the maximum number of milling balls (60 balls with 4 mm diameter was determined to be at a milling frequency of 21 Hz and a milling time of 36 min with a resulting primary particle size of 1.4 μm and a process induced disorder of 6.1% (assessed by Raman spectroscopy and 8.4% (assessed by XRPD, at a set optimization limit of < 2 μm for particle size and < 10% for process induced disorder. This optimum was tested experimentally and the process induced disorder

Saccharification and fermentation of whole barley ground in the Szego mill

Energy Technology Data Exchange (ETDEWEB)

Wayman, M; Parekh, S R; Parekh, R S; Trass, O; Gandolfi, E

1988-11-01

Barley, after steeping in water, was ground with ease and efficiency in the Szego mill, and its starch was liquefied, saccharified and fermented to very high yields of ethanol. The Szego mill consists of vertical rollers with helical grooves which rotate within a fixed cylinder, resulting in very fine grinding and a somewhat flaky product. The steeped barley was ground to a fine paste. This was readily liquefied and saccharified by amylolytic enzymes (dual enzyme process), and the resulting sugars were fermented in 24 h by ordinary bakers' yeast Saccharomyces cerevisiae, resulting in over 450 l ethanol/t of barley. Still shorter time, 12 h, and the same high yield were achieved when liquefied barley starch was simultaneously saccharified by glucoamylase and fermented. Fermentation to ethanol by a glucoamylase-producing yeast S. diastaticus strain 164A (from Labatt Brewing Company) enabled the amount of this enzyme required for saccharification to be reduced to about one-half the normal quantity, but at some cost in slower fermentation and slightly lower ethanol yield.

Enzymes for the biocatalytic production of rare sugars.

Science.gov (United States)

Beerens, Koen; Desmet, Tom; Soetaert, Wim

2012-06-01

Carbohydrates are much more than just a source of energy as they also mediate a variety of recognition processes that are central to human health. As such, saccharides can be applied in the food and pharmaceutical industries to stimulate our immune system (e.g., prebiotics), to control diabetes (e.g., low-calorie sweeteners), or as building blocks for anticancer and antiviral drugs (e.g., L: -nucleosides). Unfortunately, only a small number of all possible monosaccharides are found in nature in sufficient amounts to allow their commercial exploitation. Consequently, so-called rare sugars have to be produced by (bio)chemical processes starting from cheap and widely available substrates. Three enzyme classes that can be used for rare sugar production are keto-aldol isomerases, epimerases, and oxidoreductases. In this review, the recent developments in rare sugar production with these biocatalysts are discussed.

evaluation of the leave and bud decoctions pinus halepensis mill ...

African Journals Online (AJOL)

31 déc. 2014 ... L'espèce Pinus halepensis Mill (ou pin d'Alep), appartenant à la famille des Pinaceae, a ... au moyen d'un moulin électrique à usage domestique (model Moulinex D5001) au niveau du ..... central ltaly Flavour Frag. J., 2003 ...

A phospho-sugar binding domain homologous to NagB enzymes regulates the activity of the central glycolytic genes repressor.

Science.gov (United States)

Doan, Thierry; Martin, Laetitia; Zorrilla, Silvia; Chaix, Denis; Aymerich, Stéphane; Labesse, Gilles; Declerck, Nathalie

2008-06-01

CggR belongs to the SorC family of bacterial transcriptional regulators which control the expression of genes and operons involved in carbohydrate catabolism. CggR was first identified in Bacillus subtilis where it represses the gapA operon encoding the five enzymes that catalyze the central part of glycolysis. Here we present a structure/function study demonstrating that the C-terminal region of CggR regulates the DNA binding activity of this repressor in response to binding of a phosphorylated sugar. Molecular modeling of CggR revealed a winged-helix DNA-binding motif followed by a C-terminal domain presenting weak but significant homology with glucosamine-6-phosphate deaminases from the NagB family. In silico ligand screening suggested that the CggR C-terminal domain would bind preferentially bi-phosphorylated compounds, in agreement with previous studies that proposed fructuose-1,6-biphosphate (FBP) as the inducer metabolite. In vitro, FBP was the only sugar compound capable of interfering with CggR cooperative binding to DNA. FBP was also found to protect CggR against trypsin degradation at two arginine residues predicted to reside in a mobile loop forming the active site lid of the NagB enzymes. Replacement of residues predicted to interact with FBP led to mutant CggR with altered repressor activity in vivo but retaining their structural integrity and DNA binding activity in vitro. Interestingly, some of the mutant repressors responded with different specificity towards mono- and di-phospho-fructosides. Based on these results, we propose that the activity of the CggR-like repressors is controlled by a phospho-sugar binding (PSB) domain presenting structural and functional homology with NagB enzymes. (c) 2008 Wiley-Liss, Inc.

Saccharification of recalcitrant biomass and integration options for lignocellulosic sugars from Catchlight Energy's sugar process (CLE Sugar).

Science.gov (United States)

Gao, Johnway; Anderson, Dwight; Levie, Benjamin

2013-01-28

Woody biomass is one of the most abundant biomass feedstocks, besides agriculture residuals in the United States. The sustainable harvest residuals and thinnings alone are estimated at about 75 million tons/year. These forest residuals and thinnings could produce the equivalent of 5 billion gallons of lignocellulosic ethanol annually. Softwood biomass is the most recalcitrant biomass in pretreatment before an enzymatic hydrolysis. To utilize the most recalcitrant lignocellulosic materials, an efficient, industrially scalable and cost effective pretreatment method is needed. Obtaining a high yield of sugar from recalcitrant biomass generally requires a high severity of pretreatment with aggressive chemistry, followed by extensive conditioning, and large doses of enzymes. Catchlight Energy's Sugar process, CLE Sugar, uses a low intensity, high throughput variation of bisulfite pulping to pretreat recalcitrant biomass, such as softwood forest residuals. By leveraging well-proven bisulfite technology and the rapid progress of enzyme suppliers, CLE Sugar can achieve a high yield of total biomass carbohydrate conversion to monomeric lignocellulosic sugars. For example, 85.8% of biomass carbohydrates are saccharified for un-debarked Loblolly pine chips (softwood), and 94.0% for debarked maple chips (hardwood). Furan compound formation was 1.29% of biomass feedstock for Loblolly pine and 1.10% for maple. At 17% solids hydrolysis of pretreated softwood, an enzyme dose of 0.075 g Sigma enzyme mixture/g dry pretreated (unwashed) biomass was needed to achieve 8.1% total sugar titer in the hydrolysate and an overall prehydrolysate liquor plus enzymatic hydrolysis conversion yield of 76.6%. At a much lower enzyme dosage of 0.044 g CTec2 enzyme product/g dry (unwashed) pretreated softwood, hydrolysis at 17% solids achieved 9.2% total sugar titer in the hydrolysate with an overall sugar yield of 85.0% in the combined prehydrolysate liquor and enzymatic hydrolysate. CLE Sugar has

Sugar Sugar – don’t be misled / laat je niet misleiden

NARCIS (Netherlands)

Toebes, Brigit

2017-01-01

NRC Handelsblad’s Saturday 25 November issue contains an entry of eleven pages entirely devoted to sugar. It discusses a broad range of topics related to sugar, including the role of sugar throughout the centuries, sugar consumption in the Netherlands, the amount of sugar in bread, and sugar

Blood sugar test

Science.gov (United States)

... sugar; Blood sugar level; Fasting blood sugar; Glucose test; Diabetic screening - blood sugar test; Diabetes - blood sugar test ... The test may be done in the following ways: After you have not eaten anything for at least 8 ...

Uranium-mill appraisal program

International Nuclear Information System (INIS)

Everett, R.J.; Cain, C.L.

1982-08-01

The results of special team appraisals at NRC-licensed uranium mills in the period May to November 1981 are reported. Since the Three Mile Island accident, NRC management has instituted a program of special team appraisals of radiation protection programs at certain NRC-licensed facilities. These appraisals were designed to identify weaknesses and strengths in NRC-licensed programs, including those areas not covered by explicit regulatory requirements. The regulatory requirements related to occupational radiation protection and environmental monitoring at uranium mills have been extensively upgraded in the past few years. In addition, there was some NRC staff concern with respect to the effectiveness of NRC licensing and inspection programs. In response to this concern and to changes in mill requirements, the NRC staff recommended that team appraisals be conducted at mills to determine the adequacy of mill programs, the effectiveness of the new requirements, and mill management implementation of programs and requirements. This report describes the appraisal scope and methodology as well as summary findings and conclusions. Significant weaknesses identified during the mill appraisals are discussed as well as recommendations for improvements in uranium mill programs and mill licensing and inspection

76 FR 62339 - Domestic Sugar Program-2011-Crop Cane Sugar and Beet Sugar Marketing Allotments and Company...

Science.gov (United States)

2011-10-07

... DEPARTMENT OF AGRICULTURE Commodity Credit Corporation Domestic Sugar Program--2011-Crop Cane Sugar and Beet Sugar Marketing Allotments and Company Allocations AGENCY: Commodity Credit Corporation... the fiscal year (FY) 2012 State sugar marketing allotments and company allocations to sugarcane and...

MATHEMATICAL MODELING AND SIMULATION OF AUTOMATIC CONTROL FOR QUINTUPLE EFFECT EVAPORATION OF CENTRAL SUGAR “EL PALMAR” IN VENEZUELA

Directory of Open Access Journals (Sweden)

Lisoviett Pérez Pinto

2015-04-01

Full Text Available In this paper, the mathematical modeling and simulation of the automatic control of the quintuple effect of evaporation of a sugar mill “El Palmar” in Venezuela is made. The multiple effect consist of 5 evaporators Robert type, with equal characteristics, connected in series. Starting from the desired operating conditions and control requirements: level in each evaporator vessel, cane syrup concentration and pressure in the fifth evaporator vessel using mass balances, balance on solids for each evaporator and energy to the barometric condenser is present at the output of the fifth vessel, the nonlinear model of the process is obtained, resulting in a system of multiple inputs and multiple outputs, with strong interactions between variables. In the design of the system of the automatic process control, we are interested in maintaining the variables that characterize the performance of it and they are regulated in an operating point; we proceed to linearize the model around an equilibrium point, resulting in a new model in terms of the variables variations around an environment from that point. Then, it is processed the model obtained in terms of input and output relations, based on the characterization of it in terms of variables and transfer relationships in the complex frequency domain. Finally, the evaporation process is simulated, establishing the adequacy of the model to the real process.

Development-specific responses to drought stress in Aleppo pine (Pinus halepensis Mill.) seedlings.

Science.gov (United States)

Alexou, Maria

2013-10-01

Aleppo pine (Pinus halepensis Mill.) is a pioneer species, highly competitive due to exceptional resistance to drought. To investigate the stress resistance in the first and second year of development, a steady-state drought experiment was implemented. Photosynthesis (A(net)), stomatal conductance and transpiration (E) were measured on three different sampling dates together with phloem soluble sugars, amino acids and non-structural proteins. Needle ascorbic acid (AsA) and reactive oxygen species were measured to evaluate the seedlings' drought stress condition in the final sampling. Drought impaired A(net) and E by 35 and 31%, respectively, and increased AsA levels up to 10-fold, without significant impact on the phloem metabolites. Phloem sugars related to temperature fluctuations rather than soil moisture and did not relate closely to A(net) levels. Sugars and proteins decreased between the second and third sampling date by 56 and 61%, respectively, and the ratio of sugars to amino acids decreased between the first and third sampling by 81%, while A(net) and water-use efficiency (A(net)/E) decreased only in the older seedlings. Although gas exchange was higher in the older seedlings, ascorbic acid and phloem metabolites were higher in the younger seedlings. It was concluded that the drought stress responses depended significantly on developmental stage, and research on the physiology of Aleppo pine regeneration should focus more on temperature conditions and the duration of drought than its severity.

Integration of micro milling highspeed spindle on a microEDM-milling machine set-up

DEFF Research Database (Denmark)

De Grave, Arnaud; Hansen, Hans Nørgaard; Andolfatto, Loic

2009-01-01

In order to cope with repositioning errors and to combine the fast removal rate of micro milling with the precision and small feature size achievable with micro EDM milling, a hybrid micro-milling and micro-EDM milling centre was built and tested. The aim was to build an affordable set-up, easy...... by micro milling. Examples of test parts are shown and used as an experimental validation....

Uranium Mill Tailings Management

International Nuclear Information System (INIS)

Nelson, J.D.

1982-01-01

This book presents the papers given at the Fifth Symposium on Uranium Mill Tailings Management. Advances made with regard to uranium mill tailings management, environmental effects, regulations, and reclamation are reviewed. Topics considered include tailings management and design (e.g., the Uranium Mill Tailings Remedial Action Project, environmental standards for uranium mill tailings disposal), surface stabilization (e.g., the long-term stability of tailings, long-term rock durability), radiological aspects (e.g. the radioactive composition of airborne particulates), contaminant migration (e.g., chemical transport beneath a uranium mill tailings pile, the interaction of acidic leachate with soils), radon control and covers (e.g., radon emanation characteristics, designing surface covers for inactive uranium mill tailings), and seepage and liners (e.g., hydrologic observations, liner requirements)

Preliminary Test of Upgraded Conventional Milling Machine into PC Based CNC Milling Machine

International Nuclear Information System (INIS)

Abdul Hafid

2008-01-01

CNC (Computerized Numerical Control) milling machine yields a challenge to make an innovation in the field of machining. With an action job is machining quality equivalent to CNC milling machine, the conventional milling machine ability was improved to be based on PC CNC milling machine. Mechanically and instrumentally change. As a control replacing was conducted by servo drive and proximity were used. Computer programme was constructed to give instruction into milling machine. The program structure of consists GUI model and ladder diagram. Program was put on programming systems called RTX software. The result of up-grade is computer programming and CNC instruction job. The result was beginning step and it will be continued in next time. With upgrading ability milling machine becomes user can be done safe and optimal from accident risk. By improving performance of milling machine, the user will be more working optimal and safely against accident risk. (author)

The potential of biogas and electric power production from subproducts in the sugar and alcohol industries by the application of anaerobic digestion

Energy Technology Data Exchange (ETDEWEB)

Haandel, A. van; Cavalcanti, P.F.F. [Univ. of Campina Grande, Campina Grande, PB (Brazil)

2007-07-01

Since the seventies Brazil maintains a large production program of alcohol from sugar cane. However, the conventional production process is not very efficient: only 40% of the chemical energy of the cane plant are converted into alcohol. On the other hand large amounts of residues are generated, which in many cases have an adverse impact on the environment. In this paper it is shown that what is perceived as a residue, is in fact a subproduct that can be transformed into useful products that can be used in the industrial or agricultural activities of distilleries and sugar mills or be commercialized, thus increasing the profitability of the companies and reducing the environmental impact of these industries. The most important subproducts are bagasse (the solid phase of the cane plant) and stillage (the waste water resulting from the distillation operation). One possibility for application of bagasse is combustion for electric energy generation, which has a potential of 1 MWh per m{sup 3} produced alcohol. By applying anaerobic digestion to stillage, it is possible to generate methane which can be used for electric power generation in explosion motors with a potential of 0,5 MWh per m{sup 3} produced alcohol. Thus there is a production potential of 1,5 MWh per m{sup 3} produced alcohol from the subproducts generated at alcohol distilleries. These operations are already installed at full scale at some industries in Brazil and hold the promise not only to increase substantially the output of useful products, but also have the potential to reduce the environmental impact and can increase the profitability of the entreprises. At lab scale it was demonstrated that there are perspectives of an even larger increase of electric power production if anaerobic digestion of bagasse is applied. The application of Microbial Fuel Cells (MFCs) is a promising development for the near future to increase the useful energy output even further. The production potential of electric

Spectroscopy analysis of phenolic and sugar patterns in a food grade chestnut tannin.

Science.gov (United States)

Ricci, A; Lagel, M-C; Parpinello, G P; Pizzi, A; Kilmartin, P A; Versari, A

2016-07-15

Tannin of chestnut (Castanea sativa Mill.) wood, commonly used in winemaking was characterised with a spectroscopy qualitative approach that revealed its phenolic composition: several vibrational diagnostic bands assigned using the Attenuated Total Reflectance-Infrared Spectroscopy, and fragmentation patterns obtained using the Laser-Desorption-Ionization Time-of-Flight technique evidenced polygalloylglucose, e.g. castalagin/vescalagin-like structures as the most representative molecules, together with sugar moieties. The implication of these findings on winemaking application and the potential influence of the chemical structure on the sensory properties of wine are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Impacts of Sugar Import Policy on Sugar Production in Indonesia

OpenAIRE

Suryantoro, Agustinus; Susilo, Albertus Magnus; Supriyono, Supriyono

2013-01-01

Production of sugar unful lled consumption of Indonesia society. The lack of consumption and productionhave ful lled by import. Assumption national consumption 2,7 million ton, Indonesia will import sugar in 2013predicted about 300.000 ton (Tempo.co, August, 21, 2012).The aims in general of this research are to understand the impact of sugar import policy on sugar production.Especially (1) to understand the factors that in uence sugar import price, (2) to understand impact of sugarimport pric...

Media milling process optimization for manufacture of drug nanoparticles using design of experiments (DOE).

Science.gov (United States)

Nekkanti, Vijaykumar; Marwah, Ashwani; Pillai, Raviraj

2015-01-01

Design of experiments (DOE), a component of Quality by Design (QbD), is systematic and simultaneous evaluation of process variables to develop a product with predetermined quality attributes. This article presents a case study to understand the effects of process variables in a bead milling process used for manufacture of drug nanoparticles. Experiments were designed and results were computed according to a 3-factor, 3-level face-centered central composite design (CCD). The factors investigated were motor speed, pump speed and bead volume. Responses analyzed for evaluating these effects and interactions were milling time, particle size and process yield. Process validation batches were executed using the optimum process conditions obtained from software Design-Expert® to evaluate both the repeatability and reproducibility of bead milling technique. Milling time was optimized to process variables by applying DOE resulted in considerable decrease in milling time to achieve the desired particle size. The study indicates the applicability of DOE approach to optimize critical process parameters in the manufacture of drug nanoparticles.

Effects of Dry-Milling and Wet-Milling on Chemical, Physical and Gelatinization Properties of Rice Flour

Directory of Open Access Journals (Sweden)

Jitranut Leewatchararongjaroen

2016-09-01

Full Text Available Rice flour from nine varieties, subjected to dry- and wet-milling processes, was determined for its physical and chemical properties. The results revealed that milling method had an effect on properties of flour. Wet-milling process resulted in flour with significantly lower protein and ash contents and higher carbohydrate content. Wet-milled flour also tended to have lower lipid content and higher amylose content. In addition, wet-milled rice flour contained granules with smaller average size compared to dry-milled samples. Swelling power at 90 °C of wet-milled samples was higher while solubility was significantly lower than those of dry-milled flour. Dry milling process caused the destruction of the crystalline structure and yielded flour with lower crystallinity compared to wet-milling process, which resulted in significantly lower gelatinization enthalpy.

The ultrasound-assisted sugar extraction from sugar beet cossettes

International Nuclear Information System (INIS)

Stasiak, D.M.

2005-01-01

The aim of this work was to study the ultrasound-assisted water extraction of sugar from sugar beet cossettes. The ultrasound bath device (25 kHz, 200 W) was used. The sonication accelerated sugar diffusion at both temperatures 18 deg C and 77.6 deg C and gave the higher level of dry matter content SS (4-6 percent) and sugar content CK (7-22 percent) in juice. The SS and CK depended on time of exposition, time and temperature of extraction. In particular, the effects of 5 min ultrasound-assisted extraction were equal to 20 min extraction in traditional conditions. The shorter time, lower temperature, higher efficiency and purity of juice could be the effects of sugar extraction with ultrasound. The change of thickness of diffusion membrane, microflows in tissue as well as it's environment caused by ultrasound was the reason of acceleration of sugar extraction

Investigation of the milling capabilities of the F10 Fine Grind mill using Box-Behnken designs.

Science.gov (United States)

Tan, Bernice Mei Jin; Tay, Justin Yong Soon; Wong, Poh Mun; Chan, Lai Wah; Heng, Paul Wan Sia

2015-01-01

Size reduction or milling of the active is often the first processing step in the design of a dosage form. The ability of a mill to convert coarse crystals into the target size and size distribution efficiently is highly desirable as the quality of the final pharmaceutical product after processing is often still dependent on the dimensional attributes of its component constituents. The F10 Fine Grind mill is a mechanical impact mill designed to produce unimodal mid-size particles by utilizing a single-pass two-stage size reduction process for fine grinding of raw materials needed in secondary processing. Box-Behnken designs were used to investigate the effects of various mill variables (impeller, blower and feeder speeds and screen aperture size) on the milling of coarse crystals. Response variables included the particle size parameters (D10, D50 and D90), span and milling rate. Milled particles in the size range of 5-200 μm, with D50 ranging from 15 to 60 μm, were produced. The impeller and feeder speeds were the most critical factors influencing the particle size and milling rate, respectively. Size distributions of milled particles were better described by their goodness-of-fit to a log-normal distribution (i.e. unimodality) rather than span. Milled particles with symmetrical unimodal distributions were obtained when the screen aperture size was close to the median diameter of coarse particles employed. The capacity for high throughput milling of particles to a mid-size range, which is intermediate between conventional mechanical impact mills and air jet mills, was demonstrated in the F10 mill. Prediction models from the Box-Behnken designs will aid in providing a better guide to the milling process and milled product characteristics. Copyright © 2014 Elsevier B.V. All rights reserved.

Sap-Sugar Content of Grafted Sugar Maple Trees

Science.gov (United States)

Maurice E. Jr. Demeritt; Maurice E. Jr. Demeritt

1985-01-01

In March and April 1983, 289 and 196 young grafted sugar maple trees were tapped and evaluated for sap-sugar content. In April, sap was collected from taps both above and below the graft union. Diameter of all tapped trees at 18 inches above the ground was measured. Analysis of the data revealed that: (1) trees selected for high sugar yield cannot be reproduced by...

Natural radionuclides as dirt tracers in sugar cane consignments

International Nuclear Information System (INIS)

Bacchi, M.A.; Fernandes, E.A.N.

1998-01-01

Soil is usually carried out to the mills, as an impurity in sugar cane, leading to economic drawbacks for the industry. The quantification of this dirt is important to identify its causes and for routine quality control. Several methods have been used for this purpose, however, no single one has been pointed out as an industrial standard. The use of a γ-ray emitting radionuclide of natural occurence was investigated and, after several soil and cane radioactivity analyses, 212 Pb was chosen as the best tracer. Calibration curves developed with the addition of soil in clean cane, from 0 to 10% (dry mass), demonstrated the linearity of the method. Analyses of eleven samples taken from consignments showed that the procedure was consistent and reliable when compared to the traditional ash method. (author)

Einstein-Yang-Mills from pure Yang-Mills amplitudes

Energy Technology Data Exchange (ETDEWEB)

Nandan, Dhritiman; Plefka, Jan [Institut für Physik and IRIS Adlershof, Humboldt-Universität zu Berlin,Zum Großen Windkanal 6, D-12489 Berlin (Germany); Schlotterer, Oliver [Max-Planck-Institut für Gravitationsphysik, Albert-Einstein-Institut,Am Mühlenberg 1, D-14476 Potsdam (Germany); Wen, Congkao [I.N.F.N. Sezione di Roma Tor Vergata,Via della Ricerca Scientifica, 00133 Roma (Italy)

2016-10-14

We present new relations for scattering amplitudes of color ordered gluons and gravitons in Einstein-Yang-Mills theory. Tree-level amplitudes of arbitrary multiplicities and polarizations involving up to three gravitons and up to two color traces are reduced to partial amplitudes of pure Yang-Mills theory. In fact, the double-trace identities apply to Einstein-Yang-Mills extended by a dilaton and a B-field. Our results generalize recent work of Stieberger and Taylor for the single graviton case with a single color trace. As the derivation is made in the dimension-agnostic Cachazo-He-Yuan formalism, our results are valid for external bosons in any number of spacetime dimensions. Moreover, they generalize to the superamplitudes in theories with 16 supercharges.

7 CFR 868.310 - Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice...

Science.gov (United States)

2010-01-01

... Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice. (See also Â... Milled Rice Principles Governing Application of Standards § 868.310 Grades and grade requirements for the classes Long Grain Milled Rice, Medium Grain Milled Rice, Short Grain Milled Rice, and Mixed Milled Rice...

75 FR 71463 - Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration

Science.gov (United States)

2010-11-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,695] Woodland Mills Corporation Mill Spring, NC; Notice of Revised Determination on Reconsideration By application dated July 22... regarding the eligibility of workers and former workers of Woodland Mills Corporation, Mill Spring, North...

Habitual intake of fruit juice predicts central blood pressure.

Science.gov (United States)

Pase, Matthew P; Grima, Natalie; Cockerell, Robyn; Pipingas, Andrew

2015-01-01

Despite a common perception that fruit juice is healthy, fruit juice contains high amounts of naturally occurring sugar without the fibre content of the whole fruit. Frequent fruit juice consumption may therefore contribute to excessive sugar consumption typical of the Western society. Although excess sugar intake is associated with high blood pressure (BP), the association between habitual fruit juice consumption and BP is unclear. The present study investigated the association of fruit juice consumption with brachial and central (aortic) BP in 160 community dwelling adults. Habitual fruit juice consumption was measured using a 12 month dietary recall questionnaire. On the same day, brachial BP was measured and central (aortic) BP was estimated through radial artery applanation. Frequency of fruit juice consumption was classified as rare, occasional or daily. Those who consumed fruit juice daily, versus rarely or occasionally, had significantly higher central systolic BP (F (2, 134) = 6.09, p juice daily rather than rarely or occasionally. In conclusion, more frequent fruit juice consumption was associated with higher central BPs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluation of chemical stabilizers and windscreens for wind erosion control of uranium mill tailings

International Nuclear Information System (INIS)

Elmore, M.R.; Hartley, J.N.

1984-08-01

Potential wind erosion of uranium mill tailings is a concern for the surface disposal of tailings at uranium mills. Wind-blown tailings may subsequently be redeposited on areas outside the impoundment. Pacific Northwest Laboratory (PNL) is investigating techniques for fugitive dust control at uranium mill tailings piles. Laboratory tests, including wind tunnel studies, were conducted to evaluate the relative effectiveness of 43 chemical stabilizers. Seventeen of the more promising stabilizers were applied to test plots on a uranium tailings pile at the American Nuclear Corporation-Gas Hills Project mill site in central Wyoming. The durabilities of these materials under actual site conditions were evaluated over time. In addition, field testing of commercially available windscreens was conducted. Test panels were constructed of eight different materials at the Wyoming test site to compare their durability. A second test site was established near PNL to evaluate the effectiveness of windscreens at reducing wind velocity, and thereby reduce the potential for wind erosion of mill tailings. Results of the laboratory land field tests of the chemical stabilizers and windscreens are presented, along with costs versus effectiveness of these techniques for control of wind erosion at mill tailings piles. 12 references, 4 figures, 6 tables

Sugar beet breeding

Science.gov (United States)

Sugar beet is a recent crop developed solely for extraction of the sweetener sucrose. Breeding and improvement of Beta vulgaris for sugar has a rich historical record. Sugar beet originated from fodder beet in the 1800s, and selection has increased sugar content from 4 to 6% then to over 18% today. ...

Development of a Portable Blood Sugar Apparatus and GOD Enzyme Strip.

Science.gov (United States)

Zhen-Cheng, Chen; Yu-Qian, Zhao; Jing-Tian, Tang; Ling-Yun, Li

2005-01-01

A pocket blood sugar apparatus tested by enzyme electrode, which was designed using carbon and silver plasma as conducting materials. Both the work and reference electrodes are applied to the parts of enzyme electrode. The glucose oxidase is taken as the medium of blood sugar measuring. And the range of measuring glucose is about 50mg/dL - 500mgl/dL. It has better linear for the results and fit coefficient arrives at 0.985. Its sensitivity of measurement is higher than current glucose biosensor obviously. A single chip microcomputer, AD mu C812, is used for central control processor of the instrument parts. It measures the output of microampere level currency, which is conduced by blood sugar reacting with the glucose oxidase on the enzyme electrode. And at the same time, the microampere level currency is amplified, processed. Then the results are displayed on LCD. The apparatus are better for measuring blood sugar, and the results are consistent with what the large biochemical instruments get.

Increase The Sugar Concentration of The Solution Sugar by Reverse Osmotic Membrane

Science.gov (United States)

Redjeki, S.; Hapsari, N.; Iriani

2018-01-01

Sugar is one of the basic needs of people and food and drink industry. As technology advances and the demand for efficient usage of sugar rises, crystal sugar is seen as less advantageous than liquid sugar. If sugar is always dissolved in water before use, then it will be more efficient and practical for consumers to use sugar in liquid form than in crystal form. Other than that, liquid sugar is also attractive to consumers because it is economical, hygienic, instantly soluble in hot and cold water, fresher and longer-lasting, able to thicken and enrich the texture of foods and drinks, and functions as sweetener, syrup, and flavor enhancer. Liquid sugar is also more beneficial for sugar producers because of simpler production process, cheaper production cost, and similar yield with no extra cost. In sugar production, separation process is found in most of its stages and therefore the use of membrane technology for separating solute and water content has a good potential. In this research, water content reduction of sugar solution was done in order to increase the sugar concentration of the solution. The parameters of this research were 4%, 5%, and 6% starting concentration of sugar solution; 20, 40, and 60 minutes of process time; and 85 and 60 PSI ΔP. The best result was acquired on 4% starting concentration, 60 PSI ΔP, and 60 minutes process time.

New Generation of Resistant Sugar Beet Varieties for Advanced Integrated Management of Cercospora Leaf Spot in Central Europe.

Science.gov (United States)

Vogel, Johannes; Kenter, Christine; Holst, Carsten; Märländer, Bernward

2018-01-01

Cercospora leaf spot (CLS) epidemics in sugar beet have been increasing in recent years causing higher use of fungicides. Concomitantly, the availability of effective fungicides is at risk because of resistance development in the fungus, the lack of new active ingredients as well as restrictive approval practices. A key option for an integrated management of CLS is cultivation of resistant varieties. Because of the yield penalty in resistant varieties, acceptance in commercial practice so far has been low. The aim of our study was to characterize recent sugar beet varieties registered in Germany in terms of resistance and tolerance to CLS and their value for integrated pest management. The genetic basis of CLS resistance in varieties is protected by intellectual property rights even after variety registration and not open to the public due to economic competition. To gain reliable data for cultivation, varieties have to be tested for their resistance traits under field conditions at varying levels of infection with Cercospora beticola . In collaboration with variety related stakeholders, 15 sugar beet varieties were tested in 49 field trials in Germany from 2014 to 2016 for their yield response to CLS. The trials were set up in a split-plot design with and without infection (i.e., with and without fungicide). The classification of varietal reaction to CLS is based on symptomatic leaf area (susceptibility) and the resulting relative yield loss (tolerance). Since the relation between both parameters varied among varieties, it was used as an additional parameter to describe tolerance. On this basis, three groups of varieties were identified. They can be characterized as a susceptible, a resistant and a presumably tolerant cluster. A comparison of the data with an older dataset originating from 2009 to 2011 revealed that yield performance of recent varieties with resistance to C. beticola caught up with susceptible varieties due to breeding progress. They showed no

Evaluation of End Mill Coatings

Energy Technology Data Exchange (ETDEWEB)

L. J. Lazarus; R. L. Hester,

2005-08-01

Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

In Defense of Sugar: A Critique of Diet-Centrism.

Science.gov (United States)

Archer, Edward

2018-05-01

Sugars are foundational to biological life and played essential roles in human evolution and dietary patterns for most of recorded history. The simple sugar glucose is so central to human health that it is one of the World Health Organization's Essential Medicines. Given these facts, it defies both logic and a large body of scientific evidence to claim that sugars and other nutrients that played fundamental roles in the substantial improvements in life- and health-spans over the past century are now suddenly responsible for increments in the prevalence of obesity and chronic non-communicable diseases. Thus, the purpose of this review is to provide a rigorous, evidence-based challenge to 'diet-centrism' and the disease-mongering of dietary sugar. The term 'diet-centrism' describes the naïve tendency of both researchers and the public to attribute a wide-range of negative health outcomes exclusively to dietary factors while neglecting the essential and well-established role of individual differences in nutrient-metabolism. The explicit conflation of dietary intake with both nutritional status and health inherent in 'diet-centrism' contravenes the fact that the human body is a complex biologic system in which the effects of dietary factors are dependent on the current state of that system. Thus, macronutrients cannot have health or metabolic effects independent of the physiologic context of the consuming individual (e.g., physical activity level). Therefore, given the unscientific hyperbole surrounding dietary sugars, I take an adversarial position and present highly-replicated evidence from multiple domains to show that 'diet' is a necessary but trivial factor in metabolic health, and that anti-sugar rhetoric is simply diet-centric disease-mongering engendered by physiologic illiteracy. My position is that dietary sugars are not responsible for obesity or metabolic diseases and that the consumption of simple sugars and sugar-polymers (e.g., starches) up to 75% of

Bioconversion of paper mill sludge to bioethanol in the presence of accelerants or hydrogen peroxide pretreatment.

Science.gov (United States)

Gurram, Raghu Nandan; Al-Shannag, Mohammad; Lecher, Nicholas Joshua; Duncan, Shona M; Singsaas, Eric Lawrence; Alkasrawi, Malek

2015-09-01

In this study we investigated the technical feasibility of convert paper mill sludge into fuel ethanol. This involved the removal of mineral fillers by using either chemical pretreatment or mechanical fractionation to determine their effects on cellulose hydrolysis and fermentation to ethanol. In addition, we studied the effect of cationic polyelectrolyte (as accelerant) addition and hydrogen peroxide pretreatment on enzymatic hydrolysis and fermentation. We present results showing that removing the fillers content (ash and calcium carbonate) from the paper mill sludge increases the enzymatic hydrolysis performance dramatically with higher cellulose conversion at faster rates. The addition of accelerant and hydrogen peroxide pretreatment further improved the hydrolysis yields by 16% and 25% (g glucose / g cellulose), respectively with the de-ashed sludge. The fermentation process of produced sugars achieved up to 95% of the maximum theoretical ethanol yield and higher ethanol productivities within 9h of fermentation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Sustainability Issues and Opportunities in the Sugar and Sugar-Bioproduct Industries

Directory of Open Access Journals (Sweden)

Gillian Eggleston

2015-09-01

Full Text Available Like many other industries, the sugar and sugar-bioproduct industries are facing important sustainability issues and opportunities. The relatively low and fluctuating profit for sugar, surpluses of sugar, world-wide trend to produce alternative, renewable bio-based fuels and chemicals to those derived from petroleum and reduce greenhouse gases, water- and energy-intensive factories and refineries, and increased consumer demands for sustainably manufactured products are putting pressure on the industries to diversify for sustainability. Sugar crops, including sugar and energy cane (Saccharum officinarum, sugar and energy beets (Beta vulgaris, and sweet sorghum (Sorghum bicolor L. Moench, are excellent, renewable biomass feedstocks because of their availability, their being amongst the plants that give the highest yields of carbohydrates per hectare, and high sugar contents. While much research has been focused on conversion technologies for advanced biofuels and bioproducts, attention is now focused on developing sustainable supply chains of sugar feedstocks for the new, flexible biorefineries, with customers wanting maximum feedstock reliability and quality, while minimizing cost. All biomass from sugar crops are potential feedstocks. The cogeneration of bioelectricity from bagasse and leaf residues is being increasingly manufactured in more countries and, due to the high carbon content of bagasse and leaves, can also be converted into value-added products such as biochar. Sugar crops are superior feedstocks for the production of platform chemicals for the manufacture of a range of end-products, e.g., bioplastics, chemicals, and biomaterials. In several countries and regions, green sustainability criteria are now in place and have to be met to count against national biofuel targets. Processes to convert high-fiber sugar crop biomass into biofuel have been developed but there has only been limited commercialization at the large-scale.

Bioassay for uranium mill tailings

International Nuclear Information System (INIS)

Tschaeche, A.N.

1986-01-01

Uranium mill tailings are composed of fine sand that contains, among other things, some uranium (U/sup 238/ primarily), and all of the uranium daughters starting with /sup 230/Th that are left behind after the usable uranium is removed in the milling process. Millions of pounds of tailings are and continue to be generated at uranium mills around the United States. Discrete uranium mill tailings piles exist near the mills. In addition, the tailings materials were used in communities situated near mill sites for such purposes as building materials, foundations for buildings, pipe runs, sand boxes, gardens, etc. The Uranium Mill Tailings Remedial Action Project (UMTRAP) is a U.S. Department of Energy Program designed with the intention of removing or stabilizing the mill tailings piles and the tailings used to communities so that individuals are not exposed above the EPA limits established for such tailings materials. This paper discusses the bioassay programs that are established for workers who remove tailings from the communities in which they are placed

Role of potassium and nitrogen on sugar concentration of sugar beet

African Journals Online (AJOL)

Sugar is obtained from root of sugar beet (Beta vulgaris L.) in addition to other sources. Three important economic parameters are often considered and these are root yield, sugar concentration in root juice and total sugar yield. All the three are affected by cropping period and use of fertilisers. Existing literature suggests the ...

Biomass torrefaction mill

Science.gov (United States)

Sprouse, Kenneth M.

2016-05-17

A biomass torrefaction system includes a mill which receives a raw biomass feedstock and operates at temperatures above 400 F (204 C) to generate a dusty flue gas which contains a milled biomass product.

The equipment supply industry to sugar mills, ethanol and energy in Brazil: an analysis based in leading companies and key-organizations of sector and of LPA of Sertãozinho

Directory of Open Access Journals (Sweden)

Michelle Castro Carrijo

2015-12-01

Full Text Available This study aims to analyze the profile, organization, efficiency and innovation in the supply industry equipment for sugar mills, ethanol and energy in Brazil, contributing to an important discussion on the competitiveness of this industry. Therefore, the study was based on analysis of information obtained from two surveys: the first held with representative organizations and two industry-leading companies located in the cities of Sertãozinho and Piracicaba; and the second, through interviews with companies in the Local Productive Arrangement (LPA of Sertãozinho, known as the Silicon Valley Ethanol. The results suggest that the increasing modernization of the sector will require greater efforts from equipment industry to provide plants with the necessary technological innovations and potential efficiency gains and that the constituent companies of this industry, few invest in technology and professional training, in other words, are lacking in management training, which leads to loss of valuable opportunities, international market share is tiny, most companies turn to private sources of financing, and companies seem unaware of the real benefits of cooperation, although they appear in most companies in this industry.

Experimental study of micro-milling mechanism and surface quality of a nickel-based single crystal superalloy

Energy Technology Data Exchange (ETDEWEB)

Gao, Qi; Gong, Yadong; Zhou, Yun Guang; Wen, Xue Long [School of Mechanical Engineering and Automation, Northeastern University, Shenyang (China)

2017-01-15

Micro-milling is widely used as a method for machining of micro-parts with high precision and efficiency. Taking the nickel-based single-crystal superalloy DD98 as the research object, the crystal characteristics of single-crystal materials were analysed, and the removal mechanism of single-crystal micro-milled parts was described. Based on molecular dynamics, a simulation model for nickel-based single-crystal superalloy DD98 micro-milling was established. Based on the response surface method of central composite design, the influences of spindle speed, feed rate, and milling depth on the surface roughness were examined, and a second-order regression model of the DD98 surface roughness was established. Using analysis of variance and the residuals of the model, a significant influence on surface roughness was found in the following order from large to small: Feed rate, spindle speed, and milling depth. Comparisons were conducted between the micro-milling experimental values and the predicted model values for different process parameters. The results show that the model fit is relatively high, and the adaptability is good. Scanning electron microscopy analysis of the micro-milling surfaces was performed to verify the slip and the removal mechanism of single-crystal materials. These results offer a theoretical reference and experimental basis for micro-milling of single-crystal materials.

Managing your blood sugar

Science.gov (United States)

Hyperglycemia - control; Hypoglycemia - control; Diabetes - blood sugar control; Blood glucose - managing ... sugar ( hypoglycemia ) Recognize and treat high blood sugar ( hyperglycemia ) Plan healthy meals Monitor your blood sugar (glucose) ...

Evolution of Lignocellulosic Macrocomponents in the Wastewater Streams of a Sulfite Pulp Mill: A Preliminary Biorefining Approach

Directory of Open Access Journals (Sweden)

Tamara Llano

2015-01-01

Full Text Available The evolution of lignin, five- and six-carbon sugars, and other decomposition products derived from hemicelluloses and cellulose was monitored in a sulfite pulp mill. The wastewater streams were characterized and the mass balances throughout digestion and total chlorine free bleaching stages were determined. Summative analysis in conjunction with pulp parameters highlights some process guidelines and valorization alternatives towards the transformation of the traditional factory into a lignocellulosic biorefinery. The results showed a good separation of cellulose (99.64% during wood digestion, with 87.23% of hemicellulose and 98.47% lignin dissolved into the waste streams. The following steps should be carried out to increase the sugar content into the waste streams: (i optimization of the digestion conditions increasing hemicellulose depolymerization; (ii improvement of the ozonation and peroxide bleaching stages, avoiding deconstruction of the cellulose chains but maintaining impurity removal; (iii fractionation of the waste water streams, separating sugars from the rest of toxic inhibitors for 2nd generation biofuel production. A total of 0.173 L of second-generation ethanol can be obtained in the spent liquor per gram of dry wood. The proposed methodology can be usefully incorporated into other related industrial sectors.

Sugars, the clock and transition to flowering

Directory of Open Access Journals (Sweden)

Mohammad Reza eBolouri Moghaddam

2013-02-01

Full Text Available Sugars do not only act as source of energy, but they also act as signals in plants. This mini review summarizes the emerging links between sucrose-mediated signaling and the cellular networks involved in flowering time control and defense. Cross-talks with gibberellin (GA and jasmonate (JA signaling pathways are highlighted. The circadian clock fulfills a crucial role at the heart of cellular networks and the bilateral relation between sugar signaling and the clock is discussed. It is proposed that important factors controlling plant growth (DELLAs, PIFs, invertases and trehalose- 6-phosphate or T6P might fulfill central roles in the transition to flowering as well. The emerging concept of ‘sweet immunity’, modulated by the clock, might at least partly rely on a sucrose-specific signaling pathway that needs further exploration.

A Spoonful of (Added) Sugar Helps the Constitution Go Down: Curing the Compelled Speech Commercial Speech Doctrine with FDA’s Added Sugars Rule.

Science.gov (United States)

Smith, Colleen

On May 27, 2016, the Food and Drug Administration (FDA) announced that it was adopting a new rule that requires food manufacturers to list—on the already mandated Nutrition Facts label—how many grams of sugar have been added to a food product. Many opponents have criticized this “added sugars” rule on First Amendment grounds, arguing that the rule violates the commercial speech rights of food manufacturers. Whether the rule would survive constitutional scrutiny or not is an open question because the compelled commercial speech doctrine is anything but clear. Courts are split over whether Zauderer’s rational basis test, Central Hudson’s intermediate scrutiny, or some combination of the two should apply to a mandated disclosure like FDA’s added sugars rule. This Paper explains that the added sugars rule is unique in the history of mandated nutrition labeling in that the rule is motivated largely by public health concerns and backed by reports that assert that consumers should limit their intake of added sugars. In contrast, correcting and preventing consumer deception has been a major driving force behind the remainder of FDA’s mandated nutrition labeling. Because of this distinct rationale, the added sugars rule does not fit neatly into any currently existing compelled commercial speech test. This Paper uses the added sugars rule to highlight the deficiencies in the existing tests. Finally, this Paper proposes a new compelled commercial speech test that would adequately balance the interest of all of the effected parties: the government, the public, and food manufacturers.

Acid-base status of upper rooting zone soil in declining and non-declining sugar maple (Acer saccharum Marsh) stands in Pennsylvania

Science.gov (United States)

William E. Sharpe; Troy L. Sunderland

1995-01-01

Sugar maple (Acer saccharum Marsh) is an important commercial tree species of the central hardwood region which is valued for its wood and maple sugar products. High elevation sugar maple stands in northcentral Pennsylvania have been in serious decline for about the last 15 years with more than 1,200 hectares of maple forest affected. The decline...

Use of glutaraldehyde and benzalkonium chloride for minimizing post-harvest physio-chemical and microbial changes responsible for sucrose losses in sugar cane.

Science.gov (United States)

Singh, Pushpa; Arya, Namita; Tiwari, Priyanka; Suman, Archna; Rai, R K; Shrivastava, A K; Solomon, S

2008-08-27

Sugar cane is sensitive to enormous sucrose losses induced by physio-chemical and microbial changes, the severity being increased during the time lag between harvest and crushing in the mills. Minimization of the sucrose losses in the field is essential for better sugar recovery and prevention of sucrose losses. An experiment was conducted to evaluate the efficacy of glutaraldehyde and benzalkonium chloride for their effects on the microbial counts and physio-chemical changes responsible for sucrose losses. Glutaraldehyde and benzalkonium chloride (1000 + 250 ppm) reduced the losses in sucrose content to 7.1% as compared to the 30.8% loss in the control, thus improving the performance by 76.9%. The application of chemicals reduced the acid invertase activity (by 60%), lowered weight loss, titrable acidity, reducing sugars content, dextran, ethanol, and ethylene production and respiration rates. The application led to the reduction in the total bacterial, fungal, Leuconostoc, and yeast counts by 67.92, 51.3%, 26.08, and 51.2%, respectively.

Continuous bio-catalytic conversion of sugar mixture to acetone-butanol-ethanol by immobilized Clostridium acetobutylicum DSM 792.

Science.gov (United States)

Survase, Shrikant A; van Heiningen, Adriaan; Granström, Tom

2012-03-01

Continuous production of acetone, n-butanol, and ethanol (ABE) was carried out using immobilized cells of Clostridium acetobutylicum DSM 792 using glucose and sugar mixture as a substrate. Among various lignocellulosic materials screened as a support matrix, coconut fibers and wood pulp fibers were found to be promising in batch experiments. With a motive of promoting wood-based bio-refinery concept, wood pulp was used as a cell holding material. Glucose and sugar mixture (glucose, mannose, galactose, arabinose, and xylose) comparable to lignocellulose hydrolysate was used as a substrate for continuous production of ABE. We report the best solvent productivity among wild-type strains using column reactor. The maximum total solvent concentration of 14.32 g L(-1) was obtained at a dilution rate of 0.22 h(-1) with glucose as a substrate compared to 12.64 g L(-1) at 0.5 h(-1) dilution rate with sugar mixture. The maximum solvent productivity (13.66 g L(-1) h(-1)) was obtained at a dilution rate of 1.9 h(-1) with glucose as a substrate whereas solvent productivity (12.14 g L(-1) h(-1)) was obtained at a dilution rate of 1.5 h(-1) with sugar mixture. The immobilized column reactor with wood pulp can become an efficient technology to be integrated with existing pulp mills to convert them into wood-based bio-refineries.

State of weed infestation and features of sugar beet protection in Belarus

Directory of Open Access Journals (Sweden)

Soroka Sergey Vladimirovich

2006-01-01

Full Text Available The changes of phytosanitary situation recently taking place in sugar beet crops in the Republic of Belarus are shown. It is noticed that in the crop agrocoenosises there is a high infestation level caused by Japanese barnyard millet (Echinochloa crus-galli (L Pal. Beauv, field sowthistle (Sonchus arvensis L, chickweed (Stellaria media (L Vill, quick grass (Agropyron repens (L Pal Beauv, matricary (Matricaria perforate Merat, creeping thistle (Circium arvense (L scop, marsh woundwort (Stachus palustris L wild buckwheat (Polygonum convolvulus L, bristle stem hemp nettle (Galeopsis tetrahit L, common horsetail (Equisetum arvense L, field forget-me-not (Myosotis arvensis (L Hill, shepherd's purse (Capsella bursa-pastoris (L Med etc. Due to non-observance of preventive and separate agrotechnical techniques especially in spring-summer period, such weeds as bedstraw (Galium aparine L, white campion (Melandrium album (Mill Garcke, green amaranthus (Amaranthus retroflexus L started to appear in the crops. To protect sugar beet effectively, two variants of herbicides application are proposed. The first one - a combined, one stipulating soil action herbicides application before planting or before sugar beet seedlings emergence and on seedlings - to carry out two treatment by post-emergence preparations. The second variant, a split post- -emergence herbicide application (two-three times spraying on growing weeds at small application rates. In the next 5-6 years, a combined method will be of a primary importance in the conditions of the Republic.

Decontamination effect of milling by a jet mill on bacteria in rice flour.

Science.gov (United States)

Sotome, Itaru; Nei, Daisuke; Tsuda, Masuko; Mohammed, Sharif Hossen; Takenaka, Makiko; Okadome, Hiroshi; Isobe, Seiichiro

2011-06-01

The decontamination effect of milling by a jet mill was investigated by counting the number of bacteria in brown and white rice flour with mean particle diameters of 3, 20, and 40µm prepared by the jet mill. In the jet mill, the particles are crushed and reduced in size by the mechanical impact caused by their collision. Although the brown and white rice grains were contaminated with approximately 10(6) and 10(5) CFU/g bacteria, the microbial load of the rice flour decreased as the mean particle diameter decreased, ultimately decreasing to approximately 104 and 103 CFU/g in the brown and white rice flour. The temperature and pressure changes of the sample were not considered to have an effect on reducing the bacterial count during the milling. Hence, it was thought that the rice flour was decontaminated by other effects.

Conversion of rice husk into fermentable sugar by two stage hydrolysis

Science.gov (United States)

Salimi, M. N.; Lim, S. E.; Yusoff, A. H. M.; Jamlos, M. F.

2017-10-01

Rice husks, a complex lignocellulosic biomass which comprised of high cellulose content (38-50%), hemicellulose (23-32%) and lignin (15-25%) possesses the potential to pursue as low cost feedstock for production of ethanol. Dilute sulfuric acid at concentration of 1, 2, 3 (%, v/v) were used for pretreatments at varied hydrolysis time (15-60 min) and enzymatic saccharification at range of 45-60˚C and pH 4.5-6.0 were evaluated for conversion of rice husk’s cellulose and hemicellulose to fermentable sugars. The maximum yield of fermentable sugars from rice husks by dilute sulfuric acid (2%, 60 minutes) was 0.0751 g/l. Total fermentable sugar was identified using dinitrosalicylic acid (DNS) method and expressed in g/l. Enzymatic hydrolysis for conversion of cellulose to fermentable sugar has been studied by applying response surface methodology (RSM) and Analysis of Variance (ANOVA). Two independent variables namely initial pH and incubation temperature were considered using Central Composite Design (CCD). The determination coefficient, R2 obtained was 0.9848. This indicates that 98.48% capriciousness in the respond could be clarified by the ANOVA. Based on the data shown by Design Expert software, the optimum condition for total sugar production was at pH 6.0 and temperature 45˚C as it produced 0.5086 g/l of total sugar.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

OpenAIRE

Garc?a Nieto, Paulino Jos?; Garc?a-Gonzalo, Esperanza; Ord??ez Gal?n, Celestino; Bernardo S?nchez, Antonio

2016-01-01

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism i...

Moessbauer analysis of high-energy mechanical-milled sand fraction of a magnetic soil developing on basalt

Energy Technology Data Exchange (ETDEWEB)

Borges, Jose Flavio Marcelino; Hneda, Marlon Luiz; Brinatti, Andre Mauricio [State University of Ponta Grossa, Department of Physics (Brazil); Cunha, Joao Batista Marimon da [Federal University of Rio Grande do Sul, Institute of Physics (Brazil); Rosa, Jadir Aparecido [Polo Regional de Ponta Grossa, Agronomy Institute of Parana (Brazil); Fabris, Jose Domingos, E-mail: jdfabris@ufmg.br [Federal University of Jequitinhonha and Mucuri Valleys (UFVJM) (Brazil)

2011-11-15

A sample of the coarse sand fraction from the soil material of the A-horizon (0-0.2 m from the soil surface) of a dusky red magnetic Oxisol was submitted to high-energy mechanical milling for different times. This assay aimed mainly at (a) monitoring the individualization of strongly aggregated mineral particles, and (b) measuring the effect of the milling pressure on the mineralogy changes of the material. These data are also intended to experimentally subside any physical model describing the mechanical behavior of the superficial soil layer that is subjected to intensive machine management, in agriculture fields. Powder X-ray data reveal that some mineralogical phases, notably gibbsite, disappear soon after the first few hours milling. The 298 K-transmission Moessbauer spectrum for the non-milled sand sample shows a qualitatively typical pattern for the sand fraction of basalt derived soils, with magnetically ordered sextets, assignable mainly to hematite and maghemite, and an intense central (super)paramagnetic Fe{sup 3 + } doublet. For the milled samples, spectra revealed progressive spectral reduction of the magnetic hyperfine structure, with concomitant increase of relative subspectral areas due to (super)paramagnetic phases, as the milling time increased. This result is consistent with the reduction of measured saturation magnetization, from 4.96(8) J T{sup - 1} kg{sup - 1}, for the non-milled sample, to 3.26(7) J T{sup - 1} kg{sup - 1}, for the sample milled for 8 hours.

Dental Caries Level and Sugar Consumption in 12-Year-Old Children from Poland.

Science.gov (United States)

Olczak-Kowalczyk, Dorota; Turska, Anna; Gozdowski, Dariusz; Kaczmarek, Urszula

2016-01-01

The frequent and high consumption of sugar products, particularly sucrose, is one of the causative factors of dental caries. Meta-analyses assessing the relationship between sugar intake and dental caries revealed that a restricted sugar intake to less than 10% of the daily energy intake results in substantial health benefits. Sugar consumption in Poland is 2-fold higher than recommended by the WHO. As change in dietary habits is slow, knowledge of whether a gradual reduction of sugar consumption influences beneficially the dental condition is important. Assessment of the relationship between caries experience and sugar consumption in 12-year-old children. The data obtained from the Statistical Agricultural Yearbooks of the Central Statistical Office in Poland regarding the average yearly sugar intake by a person in the years 1995-2013, and caries prevalence (frequency and DMFT) resulting from the national epidemiological studies of the 12-year-old children conducted by the Ministry of Health in those years were analyzed. The data was analyzed by linear regression. Regression function parameters and coefficients of determination were assessed for a possible link between sugar consumption and dental caries frequency and severity was expressed as DMFT value. The mean yearly sugar intake by a statistical Pole ranged from 43.6 kg (2002) to 35.3 kg (2006). Despite a slight trend to lower the sugar consumption, its mean intake in 1995 and 2013 was the same (41.9 kg). Caries frequency and DMFT decreased in 2012 compared to 1995 from 90.5% to 79.6% and from 4.3 to 3.53 kg in 2012, respectively. The increased sugar intake by 1 kg/year caused the increase of caries frequency by 1% and DMFT value by 0.2. Even a relatively low decrease in sugar consumption can exert some beneficial influence on the dental condition in adolescents, particularly upon the severity of caries.

The Truth about Sugar.

Science.gov (United States)

Yeung, C Albert; Goodfellow, Ashley; Flanagan, Louise

2015-01-01

Sugars are used by the industry to enhance the attractiveness of foods and drinks. These added sugars, or 'free sugars', are not easily identified in food or drink labels. Certain manufactured foods and drinks with 'safe' names, such as dried fruit and fruit juice, still contain free sugars and can be confusing. Guidance states that daily consumption of free sugars should be less than 10% of total energy intake (no more than 5% in the UK). However, it is found that both tooth decay and obesity are associated with consumption of free sugars in large quantities and at inappropriate times.

Beneficial uses of paper mill residuals for New York State`s recycled-paper mills. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

This report evaluates the New York paper mill industry in terms of the productive management and treatment of solid wastes. It identifies current efforts by recycling mills to beneficially use paper mill residuals (often called sludge) and suggests additional options that should be considered by the industry in general and individual mills in particular. It also examines the regulations and economics affecting the mills and suggests actions that could improve the industry`s ability to convert wastes to value-added products. The report recommends that the mills should continue measures to reduce fiber and filler clay losses, promote the transfer of usable fiber and clay to mills able to use them, upgrade sludge dewatering capabilities, and take a more regional approach to solid waste disposal problems. State agencies are urged to support these efforts, encourage the development and commercialization of new beneficial use technologies, and reduce regulatory barriers whenever possible.

Sugar-Sweetened Beverages Are the Main Sources of Added Sugar Intake in the Mexican Population.

Science.gov (United States)

Sánchez-Pimienta, Tania G; Batis, Carolina; Lutter, Chessa K; Rivera, Juan A

2016-09-01

Sugar intake has been associated with an increased prevalence of obesity, other noncommunicable diseases, and dental caries. The WHO recommends that free sugars should be ENSANUT (National Health and Nutrition Survey) 2012], which represents 3 geographic regions and urban and rural areas. Dietary information was obtained by administering a 24-h recall questionnaire to 10,096 participants. Total sugar intake was estimated by using the National Institute of Public Health (INSP) food-composition table and an established method to estimate added sugars. The mean intakes of total, intrinsic, and added sugars were 365, 127, and 238 kcal/d, respectively. Added sugars contributed 13% of TEI. Sugar-sweetened beverages (SSBs) were the main source of sugars, contributing 69% of added sugars. Food products high in saturated fat and/or added sugar (HSFAS) were the second main sources of added sugars, contributing 25% of added sugars. The average intake of added sugars in the Mexican diet is higher than WHO recommendations, which may partly explain the high prevalence of obesity and diabetes in Mexico. Because SSBs and HSFAS contribute >94% of total added sugars, strategies to reduce their intake should be strengthened. This includes stronger food labels to warn the consumer about the content of added sugars in foods and beverages. © 2016 American Society for Nutrition.

75 FR 60715 - Domestic Sugar Program-FY 2010 and FY 2011 Cane Sugar and Beet Sugar Marketing Allotments and...

Science.gov (United States)

2010-10-01

... marketing allotment and the associated production history will be transferred from MDFC to WSG, effective... Cane Sugar and Beet Sugar Marketing Allotments and Company Allocations AGENCY: Commodity Credit... publish the modifications to the fiscal year 2010 (FY 2010) State sugar marketing allotments and company...

Role of sugar uptake and metabolic intermediates on catabolite repression in Bacillus subtilis.

Science.gov (United States)

Lopez, J M; Thoms, B

1977-01-01

Many phosphorylated intermediates exert catabolite repression on the enzyme acetoin dehydrogenase in Bacillus subtilis. This was shown with strains that are blocked at different positions in central metabolism when they receive sugars that cannot be metabolized past enzymatic block(s). In the case of sorbitol, transport events were not involved in catabolite repression, for this sugar cannot repress acetoin dehydrogenase in a strain lacking sorbitol dehydrogenase but otherwise able to take up sorbitol. The presence of glucose did not markedly influence the uptake of acetoin. PMID:401492

31 CFR Appendix A to Part 538 - Bulk Agricultural Commodities

Science.gov (United States)

2010-07-01

... Rice in the husk (paddy or rough) 1006.20 Husked (brown) Rice 1006.30 Semi-milled or wholly milled Rice....91 Sugar Beets, fresh, chilled, frozen or dried 1212.92 Sugar Cane, fresh, chilled, frozen or dried 1701.11 Cane Sugar, raw, solid form 1701.12 Beet Sugar, raw, solid form 1701.91 Cane or Beet Sugar...

31 CFR Appendix B to Part 560 - Bulk Agricultural Commodities

Science.gov (United States)

2010-07-01

... Rice in the husk (paddy or rough) 1006.20 Husked (brown) Rice 1006.30 Semi-milled or wholly milled Rice....91 Sugar Beets, fresh, chilled, frozen or dried 1212.92 Sugar Cane, fresh, chilled, frozen or dried 1701.11 Cane Sugar, raw, solid form 1701.12 Beet Sugar, raw, solid form 1701.91 Cane or Beet Sugar...

A proposal of a Planning Strategy in Order to Improve in the Production Process at the UEB Sugar Mill “Paquito Rosales”

Directory of Open Access Journals (Sweden)

Rubén Guillermo Pellicer-Durán

2015-11-01

Full Text Available This scientific research constitutes a part of the universitary project entitled “An attempt to improve the food production processes at some Unidades Empresariales de Base (UEB in the Santiago de Cuba´s province. This study is carried out inside the process that is taking place in order to redesign the Cuban sugar industry.This research work aims to suggest a strategy to increase the sugar of cane production levels taking into account some problems that are related to planning in the sugar production process. This is well represented through an strategic analysis that leads to the collection , processing and analysis of the primary information.These actions have an influence on the increase of the output base 96 in a 12 % and the growing of the recovery levels in 89,14 %. It is also estimated that the production rises on a 16,6 %.

John Stuart Mill, innate differences, and the regulation of reproduction.

Science.gov (United States)

Paul, Diane B; Day, Benjamin

2008-06-01

In this paper, we show that the question of the relative importance of innate characteristics and institutional arrangements in explaining human difference was vehemently contested in Britain during the first half of the nineteenth century. Thus Sir Francis Galton's work of the 1860s should be seen as an intervention in a pre-existing controversy. The central figure in these earlier debates-as well as many later ones-was the philosopher and economist John Stuart Mill. In Mill's view, human nature was fundamentally shaped by history and culture, factors that accounted for most mental and behavioral differences between men and women and among people of different classes, nationalities, and races. Indeed, Mill's whole program of social reform depended on the assumption that human differences were not fixed by nature. To identify the leading figures in these disputes about difference and the concrete context in which they occurred, we explore three debates in which Mill played a key role: over the capacities and rights of women, the viability of peasant proprietorship in India and Ireland, and the status of black labor in Jamaica. The last two draw our attention to the important colonial context of the nature-nurture debate. We also show that ideas that for us seem of a piece were not always linked for these earlier thinkers, nor did views on innateness necessarily have the political correlates that we now take for granted.

Effects of bagging on sugar metabolism and the activity of sugar ...

African Journals Online (AJOL)

To investigate the effects of bagging on sugar metabolism and the activity of sugar metabolism related enzymes in Qingzhong loquat fruit development, the contents of sucrose, glucose and soluble solids as well as the activities of sugar metabolism related enzymes were evaluated. The content of sucrose, glucose and ...

Duality transformations in supersymmetric Yang-Mills theories coupled to supergravity

CERN Document Server

Ceresole, Anna T; Ferrara, Sergio; Van Proeyen, A; Ceresole, A; D'Auria, R; Ferrara, S; Van Proeyen, A

1995-01-01

We consider duality transformations in N=2, d=4 Yang-Mills theory coupled to N=2 supergravity. A symplectic and coordinate covariant framework is established, which allows one to discuss stringy `classical and quantum duality symmetries' (monodromies), incorporating T and S dualities. In particular, we shall be able to study theories (like N=2 heterotic strings) which are formulated in symplectic basis where a `holomorphic prepotential' F does not exist, and yet give general expressions for all relevant physical quantities. Duality transformations and symmetries for the N=1 matter coupled Yang--Mills supergravity system are also exhibited. The implications of duality symmetry on all N>2 extended supergravities are briefly mentioned. We finally give the general form of the central charge and the N=2 semiclassical spectrum of the dyonic BPS saturated states (as it comes by truncation of the N=4 spectrum).

Environmental Setting of the Sugar Creek and Leary Weber Ditch Basins, Indiana, 2002-04

Science.gov (United States)

Lathrop, Timothy R.

2006-01-01

The Leary Weber Ditch Basin is nested within the Sugar Creek Basin in central Indiana. These basins make up one of the five study sites in the Nation selected for the Agricultural Chemicals: Sources, Transport, and Fate topical study, a part of the U.S. Geological Survey’s National Water-Quality Assessment Program. In this topical study, identifying the natural factors and human influences affecting water quality in the Leary Weber Ditch and Sugar Creek Basins are the focus of the assessment. A detailed comparison between the environmental settings of these basins is presented. Specifics of the topical study design as implemented in the Leary Weber Ditch and Sugar Creek Basins are described.

Hexose kinases and their role in sugar-sensing and plant development

Directory of Open Access Journals (Sweden)

David eGranot

2013-03-01

Full Text Available Hexose sugars, such as glucose and fructose produced in plants, are ubiquitous in most organisms and are the origin of most of the organic matter found in nature. To be utilized, hexose sugars must first be phosphorylated. The central role of hexose-phosphorylating enzymes has attracted the attention of many researchers, leading to novel discoveries. Only two families of enzymes capable of phosphorylating glucose and fructose have been identified in plants; hexokinases (HXKs and fructokinases (FRKs. Intensive investigations of these two families in numerous plant species have yielded a wealth of knowledge regarding the genes number, enzymatic characterization, intracellular localization and developmental and physiological roles of several HXKs and FRKs. The emerging picture indicates that HXK and FRK enzymes found at specific intracellular locations play distinct roles in plant metabolism and development. Individual HXKs were shown for the first time to be dual-function enzymes - sensing sugar levels independent of their catalytic activity and also controlling gene expression and major developmental pathways, as well as hormonal interactions. FRK, on the other hand, seems to play a central metabolic role in vascular tissues, controlling the amounts of sugars allocated for vascular development. While a clearer picture of the roles of these two types of enzymes is emerging, many questions remain unsolved, such as the specific tissues and types of cells in which these enzymes function, the roles of individual HXK and FRK genes, and how these enzymes interact with hormones in the regulation of developmental processes. It is anticipated that ongoing efforts will broaden our knowledge of these important plant enzymes and their potential uses in the modification of plant traits.

Airborne effluent control at uranium mills

International Nuclear Information System (INIS)

Sears, M.B.

1976-01-01

The Oak Ridge National Laboratory has made an engineering cost--environmental benefit study of radioactive waste treatment systems for decreasing the amount of radioactive materials released from uranium ore processing mills. This paper summarizes the results of the study which pertain to the control and/or abatement of airborne radioactive materials from the mill processes. The tailings area is not included. Present practices in the uranium milling industry, with particular emphasis on effluent control and waste management, have been surveyed. A questionnaire was distributed to each active mill in the United States. Replies were received from about 75 percent of the mill operators. Visits were made to six operating uranium mills that were selected because they represented the different processes in use today and the newest, most modern in mill designs. Discussions were held with members of the Region IV Office of NRC and the Grand Junction Office of ERDA. Nuclear Science Abstracts, as well as other sources, were searched for literature pertinent to uranium mill processes, effluent control, and waste management

FM Interviews: Stephanie Mills

OpenAIRE

Valauskas, Edward

2002-01-01

Stephanie Mills is an author, editor, lecturer and ecological activist who has concerned herself with the fate of the earth and humanity since 1969, when her commencement address at Mills College in Oakland, Calif., drew the attention of a nation. Her speech, which the New York Times called "perhaps the most anguished statement" of the year's crop of valedictory speeches, predicted a bleak future. According to Mills, humanity was destined for suicide, the result of overpopulation and overuse ...

Rough mill simulator version 3.0: an analysis tool for refining rough mill operations

Science.gov (United States)

Edward Thomas; Joel Weiss

2006-01-01

ROMI-3 is a rough mill computer simulation package designed to be used by both rip-first and chop-first rough mill operators and researchers. ROMI-3 allows users to model and examine the complex relationships among cutting bill, lumber grade mix, processing options, and their impact on rough mill yield and efficiency. Integrated into the ROMI-3 software is a new least-...

Techno-Economic Analysis of the Optimum Softwood Lignin Content for the Production of Bioethanol in a Repurposed Kraft Mill

Directory of Open Access Journals (Sweden)

Shufang Wu

2014-09-01

Full Text Available Kraft pulping is one possible pretreatment for softwood to economically produce bioethanol. This work evaluates the techno-economic potential of using the kraft process for producing bioethanol from softwoods in a repurposed or co-located kraft mill. Pretreated loblolly pine was enzymatically hydrolyzed at low enzyme dosages of 5 and 10 FPU/g of substrate. Pretreated residue with 13% lignin content had the highest sugar recovery, 32.7% and 47.7% at 5 and 10 FPU/g, respectively. The pretreated residues were oxygen delignified and refined. In all cases, oxygen delignification improved sugar recovery, while refining was mostly effective for pulps with high lignin content. At 5 FPU/g, the sugar recovery for all kraft pulps was 51 to 53% with oxygen delignification and refining. Increasing the enzyme dosage to 10 FPU/g increased the sugar recovery for these pulps to greater than 60%. Economic analysis for the pulps with different initial lignin content showed that kraft pulps with an initial lignin content of 6.7% with oxygen delignification had an ethanol yield of 285 L/ODt wood and the lowest total production cost of $0.55/L. Pulps with initial lignin content of 18.6% had a total production cost of $0.64/L with an ethanol yield of 264 L/ODt wood.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data.

Science.gov (United States)

García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

2016-01-28

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC-MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc . Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC-MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

Directory of Open Access Journals (Sweden)

Paulino José García Nieto

2016-01-01

Full Text Available Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC in combination with multivariate adaptive regression splines (MARS technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed.

Hybrid ABC Optimized MARS-Based Modeling of the Milling Tool Wear from Milling Run Experimental Data

Science.gov (United States)

García Nieto, Paulino José; García-Gonzalo, Esperanza; Ordóñez Galán, Celestino; Bernardo Sánchez, Antonio

2016-01-01

Milling cutters are important cutting tools used in milling machines to perform milling operations, which are prone to wear and subsequent failure. In this paper, a practical new hybrid model to predict the milling tool wear in a regular cut, as well as entry cut and exit cut, of a milling tool is proposed. The model was based on the optimization tool termed artificial bee colony (ABC) in combination with multivariate adaptive regression splines (MARS) technique. This optimization mechanism involved the parameter setting in the MARS training procedure, which significantly influences the regression accuracy. Therefore, an ABC–MARS-based model was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. Regression with optimal hyperparameters was performed and a determination coefficient of 0.94 was obtained. The ABC–MARS-based model's goodness of fit to experimental data confirmed the good performance of this model. This new model also allowed us to ascertain the most influential parameters on the milling tool flank wear with a view to proposing milling machine's improvements. Finally, conclusions of this study are exposed. PMID:28787882

Effect of milling time on microstructure and properties of Nano-titanium polymer by high-energy ball milling

Science.gov (United States)

Wang, Bo; Wei, Shicheng; Wang, Yujiang; Liang, Yi; Guo, Lei; Xue, Junfeng; Pan, Fusheng; Tang, Aitao; Chen, Xianhua; Xu, Binshi

2018-03-01

Nano-titanium (Nano-Ti) was prepared by high-energy ball milling from pure Ti power and grinding agents (Epoxy resin) at room temperature. The effect of milling time on structure and properties of Nano-Ti polymer were investigated systematically. The results show that high-energy ball milling is an effective way to produce Nano-Ti polymer. The dispersion stability and compatibility between Ti power and grinding agents are improved by prolonging the milling time at a certain degree, that is to say, the optimization milling time is 240 min. The particle size of Ti powder and the diffraction peaks intensity of Ti decrease obviously as the milling time increases due to the compression stress, shear friction and other mechanical forces are formed during ball milling. FT-IR result displays that the wavenumber of all the bands move to lower wavenumber after ball milling, and the epoxy ring is open. The system internal energy rises owing to the broken epoxy group and much more Nano-Ti is formed to promote the grafting reaction between Nano-Ti and epoxy resin. The results from TEM and XPS also prove that. And the grafting ration is maximum as the milling time is 240 min, the mass loss ratio is 17.53%.

Stable isotopic carbon composition of apples and their subfractions--juice, seeds, sugars, and nonvolatile acids.

Science.gov (United States)

Lee, H S; Wrolstad, R E

1988-01-01

The 13C:12C ratios of 8 authentic apple juice samples and their subfractions were determined by mass spectrometry. Apples from Argentina, Mexico, New Zealand, and the United States were processed into juice; pulp was collected from the milled fruit and seeds were collected from the press-cake. Sugars, nonvolatile acids, and phenolics were isolated from the juice by treatment with ion-exchange resins and polyvinylpyrrolidone (PVPP). The mean value for all juice samples was -24.2% which is close to the values reported by other investigators. Juice from apples grown in Argentina, Mexico, and New Zealand did not differ from U.S. samples. The isotopic composition of the subfractions ranged from -22.0 to -31.0%. The values for the pulp were essentially the same as for juice. The sugar fraction was slightly less negative than the juice; the nonvolatile acid and phenolic fractions were more negative. The levels of nonvolatile acids and phenolics in apple juice are low, however, so these compounds contribute little to overall delta 13C values in juice.

Method for determining the composition of the sugar moiety of a sugar containing compound

DEFF Research Database (Denmark)

2016-01-01

The present invention relates to methods of labeling sugar moieties of sugar containing compounds including glycopeptides. The compounds presented in the present invention facilitate reliable detection of sugar moieties of sugar containing compounds by a combination of spectroscopy methods...

STATISTICAL ANALYSIS OF RAW SUGAR MATERIAL FOR SUGAR PRODUCER COMPLEX

OpenAIRE

A. A. Gromkovskii; O. I. Sherstyuk

2015-01-01

Summary. In the article examines the statistical data on the development of average weight and average sugar content of sugar beet roots. The successful solution of the problem of forecasting these raw indices is essential for solving problems of sugar producing complex control. In the paper by calculating the autocorrelation function demonstrated that the predominant trend component of the growth raw characteristics. For construct the prediction model is proposed to use an autoregressive fir...

SUGAR-SWEETENED BEVERAGE, SUGAR INTAKE OF INDIVIDUALS AND THEIR BLOOD PRESSURE: INTERMAP STUDY

Science.gov (United States)

Brown, Ian J.; Stamler, Jeremiah; Van Horn, Linda; Robertson, Claire E.; Chan, Queenie; Dyer, Alan R.; Huang, Chiang-Ching; Rodriguez, Beatriz L.; Zhao, Liancheng; Daviglus, Martha L.; Ueshima, Hirotsugu; Elliott, Paul

2011-01-01

The obesity epidemic has focused attention on relationships of sugars and sugar-sweetened beverages (SSB) to cardiovascular risk factors. Here we report cross-sectional associations of SSB, diet beverages, sugars with blood pressure (BP) for UK and USA participants of the International Study of Macro/Micro-nutrients and Blood Pressure (INTERMAP). Data collected includes four 24-h dietary recalls, two 24-h urine collections, eight BP readings, questionnaire data for 2,696 people ages 40-59 from 10 USA/UK population samples. Associations of SSB, diet beverages, and sugars (fructose, glucose, sucrose) with BP were assessed by multiple linear regression. Sugar-sweetened beverage intake related directly to BP, P-values 0.005 to Sugar-sweetened beverage intake higher by 1 serving/day (355 ml/24-h) was associated with systolic/diastolic BP differences of +1.6/+0.8 mm Hg (both P sugar-sodium interactions: for individuals with above-median 24-h urinary sodium excretion, fructose intake higher by 2 SD (5.6 %kcal) was associated with systolic/diastolic BP differences of +3.4/+2.2 mm Hg (both P sugar-BP differences for persons with higher sodium excretion, lend support to recommendations that intake of SSB, sugars, and salt be substantially reduced. PMID:21357284

Long-Term Effects of Olive oil Mill wastewater spreading on soil and olive trees

Energy Technology Data Exchange (ETDEWEB)

Ben rouina, B.; Ben Ahmed, C.; Boukhris, M.

2009-07-01

The olive oil extraction process produces huge amounts of liquid waste called olive mill waste water (OMWW). Large amounts of OMWW (30 million m{sup 3}) are produced in the Mediterranean regions that accounts for 95% of the total olive oil production worldwide. In Tunisia, OMWW constitutes a serious environmental problem due to the features associated with this type of agro-waste and to its diverse organic load which may reach values as high as 100 g/L and is mained with this type of agro-waste and to its diverse organic load which may reach values as high as 100 g/L is mainly due to sugars. lipids, phenols, and tannins. (Author)

Long-Term Effects of Olive oil Mill wastewater spreading on soil and olive trees

International Nuclear Information System (INIS)

Ben rouina, B.; Ben Ahmed, C.; Boukhris, M.

2009-01-01

The olive oil extraction process produces huge amounts of liquid waste called olive mill waste water (OMWW). Large amounts of OMWW (30 million m 3 ) are produced in the Mediterranean regions that accounts for 95% of the total olive oil production worldwide. In Tunisia, OMWW constitutes a serious environmental problem due to the features associated with this type of agro-waste and to its diverse organic load which may reach values as high as 100 g/L and is mained with this type of agro-waste and to its diverse organic load which may reach values as high as 100 g/L is mainly due to sugars. lipids, phenols, and tannins. (Author)

Non-linear Yang-Mills instantons from strings are π-stable D-branes

International Nuclear Information System (INIS)

Enger, H.; Luetken, C.A.

2004-01-01

We show that B-type Π-stable D-branes do not in general reduce to the (Gieseker-) stable holomorphic vector bundles used in mathematics to construct moduli spaces. We show that solutions of the almost Hermitian Yang-Mills equations for the non-linear deformations of Yang-Mills instantons that appear in the low-energy geometric limit of strings exist iff they are π-stable, a geometric large volume version of Π-stability. This shows that π-stability is the correct physical stability concept. We speculate that this string-canonical choice of stable objects, which is encoded in and derived from the central charge of the string-algebra, should find applications to algebraic geometry where there is no canonical choice of stable geometrical objects

Focused ion beam milling of carbon fibres

International Nuclear Information System (INIS)

Huson, Mickey G.; Church, Jeffrey S.; Hillbrick, Linda K.; Woodhead, Andrea L.; Sridhar, Manoj; Van De Meene, Allison M.L.

2015-01-01

A focused ion beam has been used to mill both individual carbon fibres as well as fibres in an epoxy composite, with a view to preparing flat surfaces for nano-indentation. The milled surfaces have been assessed for damage using scanning probe microscopy nano-indentation and Raman micro-probe analysis, revealing that FIB milling damages the carbon fibre surface and covers surrounding areas with debris of disordered carbon. The debris is detected as far as 100 μm from the milling site. The energy of milling as well as the orientation of the beam was varied and shown to have an effect when assessed by Raman spectroscopy. - Highlights: • Focused ion beam (FIB) milling was used to mill flat surfaces on carbon fibres. • Raman spectroscopy showed amorphous carbon was generated during FIB milling. • The amorphous debris is detected as far as 100 μm from the milling site. • This surface degradation was confirmed by nano-indentation experiments.

Cuban Sugar Industry: Transnational Networks and Engineering Migrants in Mid-Nineteenth Century Cuba

NARCIS (Netherlands)

Curry Machado, J.M.

2011-01-01

Technological innovation was central to nineteenth-century Cuba’s lead in world sugar manufacture. Along with steam-powered machinery came migrant engineers, indispensable aliens who were well rewarded for their efforts. These migrant engineers remained perennial outsiders, symbolic of Cuba's

Optimal Condition of Fenton's Reagent to Enhance the Alcohol Production from Palm Oil Mill Effluent (POME

Directory of Open Access Journals (Sweden)

Supawadee Sinnaraprasat

2011-07-01

Full Text Available Application of Fenton's reaction for a proper hydrolysis step is an essential and important step in obtaining a higher level of readily biodegradable sugars from palm oil mill effluent (POME for improving the alcohol production by using immobilized Clostridium acetobutylicum. The objective of this research was, therefore, to investigate the optimum condition of Fenton's reaction in terms of COD: H2O2 ratios (w/w and H2O2: Fe2+ ratios (molar ratio used to oxidize carbohydrate and high molecular organic compounds into simple sugars, which are further fermented into alcohol. The experiments were carried out at H2O2: Fe2+ ratios (molar ratios of 5, 10, 20, 30 and 40 and the COD: H2O2 ratios (w/w of 50, 70, 100 and 130 (initial COD about 50,000 mg/L. The total sugar concentrations and organic compounds biodegradability (BOD5/COD ratios were also used for investigating suitable conditions for Fenton's reaction. The concentration of Fenton's reagent at H2O2:Fe2+ and COD:H2O2 ratio of 20 and 130 was identified as the optimum operating condition for the highest simple sugars of about 0.865% and BOD5/COD ratios of 0.539. The alcohol productions were carried out in the continuous stirred tank reactors (CSTR under an anaerobic continuous immobilization system. At a hydraulic retention time of 12 hours and POME pH of 4.8, the maximum total ABE concentration of 495 mg/L and the ABE yield of 0.236 grams of ABE produced/gram of reducing sugars were achieved at the mixed polyvinyl alcohol (PVA and palm oil ash (POA ratio of 10 : 3.

SOURCES OF GROWTH OF SUGAR CANE PRODUCTION IN WEST CENTRAL AND SOUTHEAST OF BRAZIL

Directory of Open Access Journals (Sweden)

Geraldo Moreira Bittencourt

2014-09-01

Full Text Available This study aims at assessing the determinants of variations in the production of sugar cane in Southeast and Midwest of the Brazil, between 1990 and 2009, measuring the effects area, productivity and composition. The theoretical framework consists of the conceptualization of the modernization of agriculture and the description of the theory of induced innovation. The empirical analysis is based on the work of the Shift-Share model, also known as a differential structure. In the results from 1990 to 2009 (total period, there is the hypothesis of the higher average yield of sugarcane in the Southeast and of the pattern of growth production by area in the Midwest. On the other hand, in the period 2005 to 2009, where the two regions in question had the highest growth rates of production of sugar cane, the composition effect revealed the most significant values, showing that the expansion of sugarcane production has occurred in these regions, mainly by substituting other crops by land less profitable.

The water footprint of sweeteners and bio-ethanol from sugar cane, sugar beet and maize

NARCIS (Netherlands)

Gerbens-Leenes, Winnie; Hoekstra, Arjen Ysbert

2009-01-01

Sugar cane and sugar beet are used for sugar for human consumption. In the US, maize is used, amongst others, for the sweetener High Fructose Maize Syrup (HFMS). Sugar cane, sugar beet and maize are also important for bio-ethanol production. The growth of crops requires water, a scarce resource. The

Sugar palm (Argena pinnata). Potential of sugar palm for bio-ethanol production

OpenAIRE

Elbersen, H.W.; Oyen, L.P.A.

2010-01-01

The energetic and economic feasibility of bioethanol production from sugar palm is virtually unknown. A positive factor are the potentially very high yields while the long non-productive juvenile phase and the high labor needs can be seen as problematic. Expansion to large scale sugar palm cultivation comes with risks. Small-scale cultivation of sugar palm perfectly fits into local farming systems. In order to make a proper assessment of the value palm sugar as bio-ethanol crop more informati...

Surface Quality of Staggered PCD End Mill in Milling of Carbon Fiber Reinforced Plastics

Directory of Open Access Journals (Sweden)

Guangjun Liu

2017-02-01

Full Text Available Machined surface quality determines the reliability, wear resistance and service life of carbon fiber reinforced plastic (CFRP workpieces. In this work, the formation mechanism of the surface topography and the machining defects of CFRPs are proposed, and the influence of milling parameters and fiber cutting angles on the surface quality of CFRPs is obtained, which can provide a reference for extended tool life and good surface quality. Trimming and slot milling tests of unidirectional CFRP laminates are performed. The surface roughness of the machined surface is measured, and the influence of milling parameters on the surface roughness is analyzed. A regression model for the surface roughness of CFRP milling is established. A significance test of the regression model is conducted. The machined surface topography of milling CFRP unidirectional laminates with different fiber orientations is analyzed, and the effect of fiber cutting angle on the surface topography of the machined surface is presented by using a digital super depth-of-field microscope and scanning electron microscope (SEM. To study the influence of fiber cutting angle on machining defects, the machined topography under different fiber orientations is analyzed. The slot milling defects and their formation mechanism under different fiber cutting angles are investigated.

Free Sugar Profile in Cycads

Directory of Open Access Journals (Sweden)

Thomas Edward Marler

2014-10-01

Full Text Available The sugars fructose, glucose, maltose, and sucrose were quantified in seven tissues of Zamia muricata Willd. to determine their distribution throughout various organs of a model cycad species, and in lateral structural roots of 18 cycad species to determine the variation in sugar concentration and composition among species representing every cycad genus. Taproot and lateral structural roots contained more sugars than leaf, stem, female strobilus, or coralloid roots. For example, taproot sugar concentration was 6.4-fold greater than stem sugar concentration. The dominant root sugars were glucose and fructose, and the only detected stem sugar was sucrose. Sucrose also dominated the sugar profile for leaflet and coralloid root tissue, and fructose was the dominant sugar in female strobilus tissue. Maltose was a minor constituent of taproot, leaflet, and female strobilus tissue, but absent in other tissues. The concentration of total free sugars and each of the four sugars did not differ among genera or families. Stoichiometric relationships among the sugars, such as the quotient hexoses/disaccharides, differed among organs and families. Although anecdotal reports on cycad starch have been abundant due to its historical use as human food and the voluminous medical research invested into cycad neurotoxins, this is the first report on the sugar component of the non-structural carbohydrate profile of cycads. Fructose, glucose, and sucrose are abundant in cycad tissues, with their relative abundance highly contrasting among organs. Their importance as forms of carbon storage, messengers of information, or regulators of cycad metabolism have not been determined to date.

Home blood sugar testing

Science.gov (United States)

Diabetes - home glucose testing; Diabetes - home blood sugar testing ... Usual times to test your blood sugar are before meals and at bedtime. Your provider may ask you to check your blood sugar 2 hours after a meal or ...

Sugar from Palms

DEFF Research Database (Denmark)

Barfod, Anders

Throughout the tropics and subtropics a large number of products are derived from the sugar-rich sap tapped from palms. I will give an overview of the most important species being exploited, harvesting practices and yields. I will further provide insights in the biomechanmics of sugar...... transportation in palms, which remain an enigma. Finally, the prospects for developing palm sugar into a commodity of worlswide significance will be discussed....

Energy advantage of the cane bagasse in the sugar industry; Aprovechamiento energetico del bagazo de cana en la industria azucarera

Energy Technology Data Exchange (ETDEWEB)

Hernandez Alarcon, Luis Alfredo

1987-07-01

The present study makes an analysis of the production and bagasse consumption in Mexico related to those indicators that orient and affect the energy advantage of the fiber within the energy structure and global sugar energy balance of the subsector. This global analysis is at the end concentrated on the evaluation of the steam generators of a sugar mill, that like Casasano, went from burning fuel oil only until 1984, to use bagasse and fuel oil simultaneously, in an attempt to reduce its specific consumption of energy, one of highest of the country. In 1985, 534 thousand hectares of sugar cane were cultivated, with field yields of 68.8 t/ha; of the 36.7 million tons of sugar cane produced, 35.7 million were ground to obtain, in the 69 sugar mills of the country 3.2 million tons of sugar, satisfying again the national consumption. In the respective grinding season 12 million tons of humid bagasse, were produced, representing the 34.5% of the total of the ground sugar cane; this bagasse was dedicated in 86.5% to the steam generation, with an average ratio of 1.87 kg of steam per kg of bagasse, contributing to the own energy balance the equivalent of 17.6 trillions of kilo-calories that correspond to the 66.2% of the total energy consumed by the sector, being left 33.8% contributed by the fuel oil. In order to generate steam in 1985 it had installed 543859 HP used with a weighed efficiency of 56.4%, of which the 91.5% used, in simultaneous form bagasse and fuel oil, the 6.38% only fuel oil and the 2.1% only bagasse. In the Casasano sugar mill a similar analysis is made, ending with the evaluation of the energy advantage of the bagasse in their boilers and of the factors that influence the specific energy consumption. In this form one settles down that the bagasse consumed in the last grinding season was burned generating 1.4 kg of steam per kg of bagasse in boilers working with an efficiency of 60% and consuming 1,090 kg of steam per ton of ground sugar cane

Sugar Restriction Leads to Increased Ad Libitum Sugar Intake by Overweight Adolescents in an Experimental Test Meal Setting.

Science.gov (United States)

O'Reilly, Gillian A; Black, David S; Huh, Jimi; Davis, Jaimie N; Unger, Jennifer; Spruijt-Metz, Donna

2017-07-01

The impact of sugar restriction on subsequent sugar intake by overweight adolescents is unknown. Our aim was to examine the effect of sugar restriction on subsequent ad libitum sugar intake by overweight adolescents and whether habitual sugar intake and impulsivity influence the effect of sugar restriction on subsequent sugar intake. This was an in-laboratory crossover feeding trial with sugar-exposure and sugar-restriction conditions. Eighty-seven overweight Latino and African-American adolescents underwent both meal conditions in two separate 8-hour in-laboratory visits. Participants had access to ad libitum snack trays for 3 hours after the condition-specific meals. Ad libitum sugar intake during the snack period was measured at each visit. Habitual sugar intake and impulsivity were assessed at baseline. Repeated measures analysis of covariance was used to examine the within-person effect of meal condition on ad libitum sugar intake. Mixed models were used to examine the moderating effects of habitual sugar intake and impulsivity on the meal condition-ad libitum sugar intake relationship. Participants consumed more ad libitum sugar during the snack period in the sugar-restriction condition than in the sugar-exposure condition (sugar restriction=78.63±38.84 g, sugar exposure=70.86±37.73 g; F=9.64, P=0.002). There was no relationship between habitual sugar intake and how much ad libitum sugar participants consumed during either condition. Higher impulsivity was associated with greater ad libitum sugar intake during both conditions (sugar restriction: b=.029, standard error=.01, Poverweight adolescents restricted from sugar intake consume greater amounts of sugar when they are later given access to high-sugar foods. Overweight adolescents with higher impulsivity appear to consume greater amounts of sugar regardless of previous levels of sugar consumption. Compensatory sugar intake and trait impulsivity may have implications for dietary interventions in this

Yang-Mills gravity in biconformal space

International Nuclear Information System (INIS)

Anderson, Lara B; Wheeler, James T

2007-01-01

We write a gravity theory with Yang-Mills-type action using the biconformal gauging of the conformal group. We show that the resulting biconformal Yang-Mills gravity theories describe 4-dim, scale-invariant general relativity in the case of slowly changing fields. In addition, we systematically extend arbitrary 4-dim Yang-Mills theories to biconformal space, providing a new arena for studying flat-space Yang-Mills theories. By applying the biconformal extension to a 4-dim pure Yang-Mills theory with conformal symmetry, we establish a 1-1, onto mapping between a set of gravitational gauge theories and 4-dim, flat-space gauge theories

Complete oxidative conversion of lignocellulose derived non-glucose sugars to sugar acids by Gluconobacter oxydans.

Science.gov (United States)

Yao, Ruimiao; Hou, Weiliang; Bao, Jie

2017-11-01

Non-glucose sugars derived from lignocellulose cover approximately 40% of the total carbohydrates of lignocellulose biomass. The conversion of the non-glucose sugars to the target products is an important task of lignocellulose biorefining research. Here we report a fast and complete conversion of the total non-glucose sugars from corn stover into the corresponding sugar acids by whole cell catalysis and aerobic fermentation of Gluconobacter oxydans. The conversions include xylose to xylonate, arabinose to arabonate, mannose to mannonate, and galactose to galactonate, as well as with glucose into gluconate. These cellulosic non-glucose sugar acids showed the excellent cement retard setting property. The mixed cellulosic sugar acids could be used as cement retard additives without separation. The conversion of the non-glucose sugars not only makes full use of lignocellulose derived sugars, but also effectively reduces the wastewater treatment burden by removal of residual sugars. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of rice sample preparation and milling procedures on milling quality appraisals

Science.gov (United States)

The objective of this research was to investigate the effect of sample preparation and milling procedure on milling quality appraisals of rough rice. Samples of freshly harvested medium-grain rice (M202) with different initial moisture contents (MCs) ranging from 20.2% to 25.1% (w.b.) were used for...

Influence of milling process on efavirenz solubility

Directory of Open Access Journals (Sweden)

Erizal Zaini

2017-01-01

Full Text Available Introduction: The aim of this study was to investigate the influence of the milling process on the solubility of efavirenz. Materials and Methods: Milling process was done using Nanomilling for 30, 60, and 180 min. Intact and milled efavirenz were characterized by powder X-ray diffraction, scanning electron microscopy (SEM, spectroscopy infrared (IR, differential scanning calorimetry (DSC, and solubility test. Results: The X-ray diffractogram showed a decline on peak intensity of milled efavirenz compared to intact efavirenz. The SEM graph depicted the change from crystalline to amorphous habit after milling process. The IR spectrum showed there was no difference between intact and milled efavirenz. Thermal analysis which performed by DSC showed a reduction on endothermic peak after milling process which related to decreasing of crystallinity. Solubility test of intact and milled efavirenz was conducted in distilled water free CO2with 0.25% sodium lauryl sulfate media and measured using high-performance liquid chromatography method with acetonitrile: distilled water (80:20 as mobile phases. The solubility was significantly increased (P < 0.05 after milling processes, which the intact efavirenz was 27.12 ± 2.05, while the milled efavirenz for 30, 60, and 180 min were 75.53 ± 1.59, 82.34 ± 1.23, and 104.75 ± 0.96 μg/mL, respectively. Conclusions: Based on the results, the solubility of efavirenz improved after milling process.

Respiration-dependent utilization of sugars in yeasts: a determinant role for sugar transporters.

Science.gov (United States)

Goffrini, Paola; Ferrero, Iliana; Donnini, Claudia

2002-01-01

In many yeast species, including Kluyveromyces lactis, growth on certain sugars (such as galactose, raffinose, and maltose) occurs only under respiratory conditions. If respiration is blocked by inhibitors, mutation, or anaerobiosis, growth does not take place. This apparent dependence on respiration for the utilization of certain sugars has often been suspected to be associated with the mechanism of the sugar uptake step. We hypothesized that in many yeast species, the permease activities for these sugars are not sufficient to ensure the high substrate flow that is necessary for fermentative growth. By introducing additional sugar permease genes, we have obtained K. lactis strains that were capable of growing on galactose and raffinose in the absence of respiration. High dosages of both the permease and maltase genes were indeed necessary for K. lactis cells to grow on maltose in the absence of respiration. These results strongly suggest that the sugar uptake step is the major bottleneck in the fermentative assimilation of certain sugars in K. lactis and probably in many other yeasts.

76 FR 50285 - Fiscal Year 2012 Tariff-Rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Science.gov (United States)

2011-08-12

... for Raw Cane Sugar, Refined and Specialty Sugar and Sugar-Containing Products AGENCY: Office of the... quantity of the tariff-rate quotas for imported raw cane sugar, refined and specialty sugar and sugar...), the United States maintains tariff-rate quotas (TRQs) for imports of raw cane sugar and refined sugar...

Ray tissues as an indirect measure of relative sap-sugar concentration in sugar maple

Science.gov (United States)

Peter W. Garrett; Kenneth R. Dudzik; Kenneth R. Dudzik

1989-01-01

Attempts to correlate ray tissue as a percentage of total wood volume with sap-sugar concentrations of sugar maple progenies were unsuccessful. These results raise doubts about our ability to use a relatively constant value such as ray-tissue volume in a selection program designed to increase the sap-sugar concentration of sugar maple seedlings.

77 FR 57180 - Fiscal Year 2013 Tariff-rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Science.gov (United States)

2012-09-17

... Sugar, Refined and Specialty Sugar, and Sugar-Containing Products AGENCY: Office of the United States... quantity of the tariff-rate quotas for imported raw cane sugar, refined and specialty sugar, and sugar... imports of raw cane sugar and refined sugar. Pursuant to Additional U.S. Note 8 to Chapter 17 of the HTS...

Tool Wear Analysis on Five-Axis Flank Milling for Curved Shape Part – Full Flute and Ground Shank End Mill

Directory of Open Access Journals (Sweden)

Syahrul Azwan Sundi

2017-01-01

Full Text Available This paper is a study on full flute (extra-long tool and ground shank end mill wear analysis by utilizing five-axis CNC to implement flank milling strategy on curved shape part. Five-axis machining eases the user to implement variations of strategy such as flank milling. Flank milling is different from point milling. Point milling cuts materials by using the tip of the tool whereas the flank milling uses the cutting tool body to cut material. The type of cutting tool used was end mill 10 mm diameter with High Speed Steel (HSS material. One factor at a time was utilized to analyze the overall data. Feed rate and spindle speed were the two main factors that been set up equally for both full flute and ground shank end mill. At the end of this research, the qualitative analysis based on tool wear between full flute and ground shank end mill is observed. Generally, both types of cutting tools showed almost the same failure indication such as broken edge or chipped off edge, formation of pinned hole on the surface and serration formation or built-up edge (BUE on the primary flute. However, the results obtained from the enlarged images which were captured by Optical Microscope indicated that, the ground shank end mill is better than the full flute end mill.

Particle deformation during stirred media milling

Science.gov (United States)

Hamey, Rhye Garrett

Production of high aspect ratio metal flakes is an important part of the paint and coating industry. The United States Army also uses high aspect ratio metal flakes of a specific dimension in obscurant clouds to attenuate infrared radiation. The most common method for their production is by milling a metal powder. Ductile metal particles are initially flattened in the process increasing the aspect ratio. As the process continues, coldwelding of metal flakes can take place increasing the particle size and decreasing the aspect ratio. Extended milling times may also result in fracture leading to a further decrease in the particle size and aspect ratio. Both the coldwelding of the particles and the breakage of the particles are ultimately detrimental to the materials performance. This study utilized characterization techniques, such as, light scattering and image analysis to determine the change in particle size as a function of milling time and parameters. This study proved that a fundamental relationship between the milling parameters and particle deformation could be established by using Hertz's theory to calculate the stress acting on the aluminum particles. The study also demonstrated a method by which milling efficiency could be calculated, based on the amount of energy required to cause particle deformation. The study found that the particle deformation process could be an energy efficient process at short milling times with milling efficiency as high as 80%. Finally, statistical design of experiment was used to obtain a model that related particle deformation to milling parameters, such as, rotation rate and milling media size.

Learning Activity Packets for Milling Machines. Unit I--Introduction to Milling Machines.

Science.gov (United States)

Oklahoma State Board of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This learning activity packet (LAP) outlines the study activities and performance tasks covered in a related curriculum guide on milling machines. The course of study in this LAP is intended to help students learn to identify parts and attachments of vertical and horizontal milling machines, identify work-holding devices, state safety rules, and…

Apparatus for drying sugar cubes

NARCIS (Netherlands)

Derckx, H.A.J.; Torringa, H.M.

1999-01-01

Device for drying sugar cubes containing a heating apparatus for heating and dehumidifying the sugar cubes, a conditioning apparatus for cooling off and possibly further dehumidifying the sugar cubes and a conveying apparatus for conveying the sugar cubes through the heating apparatus and the

The Sugar Tax in Holland

NARCIS (Netherlands)

Ajjaji, Fadoua

2016-01-01

This inquiry supports the theory of a sugar tax has a positive influence on the sugar consumption of Dutch individuals. Once a tax is implemented, the sugar consumption declines. Furthermore, this study supported the hypothesis claiming that children have a positive influence on their parental sugar

The Effect of Ultrasonic Waves on Sugar Extraction and Mechanical Properties of Sugar Beet

Directory of Open Access Journals (Sweden)

K Hedayati

2013-09-01

Full Text Available Sugar, which can be extracted from sugar cane and sugar beet, is one of the most important ingredients of food. Conducting more research to increase the extraction efficiency of sugar is necessary due to high production of sugar beet and its numerous processing units in northern Khorasan province. In this research, the effect of temperature, time and the frequency of ultrasonic waves on mechanical properties of sugar beet and its extraction rate of sugar in moisture content of 75% were studied. In this regard, an ultrasonic bath in laboratory scale was used. The studied parameters and their levels were frequency in three levels (zero, 25 and 45 KHz, temperature in three levels (25, 50 and 70 ° C and the imposed time of ultrasonic waves in three levels (10, 20 and 30 min. Samples were prepared using planned experiments and the results were compared with control sugar beet samples. A Saccharimeter was used to measure the concenteration of sugar in samples. Two different types of probe including semi-spherical end and the other one with sharpened edges were used to measure mechanical properties. The studied parameters of frequency, temperature and time showed significant effect on sugar extraction and their resulted effect in optimized levels revealed up to 56% increase in sugar extraction compared with control samples. The obtained values of elastic modulus and shear modulus showed a decreasing trend. The obtained values of total energy of rupture, the total energy of shear, the maximum force of rupture, and the yield point of rupture showed an increasing trend. The frequency had no significant effect on the yield point of rupture and shear force.

Sugar regulation of SUGAR TRANSPORTER PROTEIN 1 (STP1) expression in Arabidopsis thaliana

Science.gov (United States)

Cordoba, Elizabeth; Aceves-Zamudio, Denise Lizeth; Hernández-Bernal, Alma Fabiola; Ramos-Vega, Maricela; León, Patricia

2015-01-01

Sugars regulate the expression of many genes at the transcriptional level. In Arabidopsis thaliana, sugars induce or repress the expression of >1800 genes, including the STP1 (SUGAR TRANSPORTER PROTEIN 1) gene, which encodes an H+/monosaccharide cotransporter. STP1 transcript levels decrease more rapidly after the addition of low concentrations of sugars than the levels of other repressed genes, such as DIN6 (DARK-INDUCED 6). We found that this regulation is exerted at the transcriptional level and is initiated by phosphorylatable sugars. Interestingly, the sugar signal that modulates STP1 expression is transmitted through a HEXOKINASE 1-independent signalling pathway. Finally, analysis of the STP1 5′ regulatory region allowed us to delimit a region of 309bp that contains the cis elements implicated in the glucose regulation of STP1 expression. Putative cis-acting elements involved in this response were identified. PMID:25281700

Sugar - a harmless indulgence?

DEFF Research Database (Denmark)

Rasmussen, Lone Banke; Andersen, Niels Lyhne; Ovesen, L.

1998-01-01

The consumption of sugar is relatively high in Denmark - and other industrial countries - and many persons have a consumption which exceeds the recommended level of maximally 10% of energy intake. A high sugar consumption may reduce the nutrient density of the diet and increase the risk of vitamin...... and mineral deficiency, especially in low energy consumers. The sugar intake and the fat intake, expressed as percentage of energy, usually show an inverse association. This has lead to the statement that a diet with both a low sugar content and a low fat content is incompatible, but we will argue...... that this is not the fact. The significance of sugar for the development of obesity is not clarified. A high fat content in the diet seems to promote the development of obesity, while a high carbohydrate content tends to reduce obesity. It is not known if sugar in this connection is comparable to the other carbohydrates...

Nanocrystalline TiAl powders synthesized by high-energy ball milling: effects of milling parameters on yield and contamination

International Nuclear Information System (INIS)

Bhattacharya, Prajina; Bellon, Pascal; Averback, Robert S.; Hales, Stephen J.

2004-01-01

High-energy ball milling was employed to produce nanocrystalline Ti-Al powders. As sticking of the powders can be sufficiently severe to result in a near zero yield, emphasis was placed on varying milling conditions so as to increase the yield, while avoiding contamination of the powders. The effects of milling parameters such as milling tools, initial state of the powders and addition of process control agents (PCA's) were investigated. Cyclohexane, stearic acid and titanium hydride were used as PCA's. Milling was conducted either in a Cr-steel vial with C-steel balls, or in a tungsten carbide (WC) vial with WC balls, using either elemental or pre-alloyed powders. Powder samples were characterized using X-ray diffraction, scanning and transmission electron microscopy. In the absence of PCA's mechanical alloying in a WC vial and attrition milling in a Cr-steel vial were shown to lead to satisfactory yields, about 65-80%, without inducing any significant contamination of the powders. The results suggest that sticking of the powders on to the milling tools is correlated with the phase evolution occurring in these powders during milling

Surplus electricity production in sugarcane mills using residual bagasse and straw as fuel

International Nuclear Information System (INIS)

Alves, Moises; Ponce, Gustavo H.S.F.; Silva, Maria Aparecida; Ensinas, Adriano V.

2015-01-01

The cogeneration system is one of the most important parts of sugarcane mills which use the bagasse as fuel. In the recent years, modern equipments and energy efficiency measures made possible to the sugarcane industry, the production of surplus electricity which become, besides the sugar and ethanol, a third product from the same renewable source, the sugarcane. This work analyses the surplus electric power systems for three different schemes of cogeneration system in the sugarcane industry through the simulator Thermoflow"®. The analysis is made considering both the available bagasse and sugarcane straw recovery as fuel in three different scenarios for the industrial process energy requirements. The results show that the CEST (Condensing Extraction Steam Turbine) system can have a surplus of electricity of up to four times higher than the BPST (Backpressure Steam Turbine) system. The system CEST can have an increase in surplus power above 23% and 102% for the rate of 10% and 50% of cane straw recovery in the field respectively. The BPST-C (Backpressure and Condensing Turbines) system can produce similar values of surplus electricity when compared with the system CEST, but may represent an opportunity of flexible operation of the cogeneration systems in harvest and off-seasons. - Highlights: • At least three cogeneration system options are available in sugarcane mills. • Nowadays, only steam-based cycle cogeneration systems are used in sugarcane mills. • BPST system is limited to 70 e kWh/t cane of surplus electricity production. • CEST system increases the surplus electricity up to four times than the BPST. • Operation during off-season of the BPST-C system is an advantage for this option.

The progress in the researches for uranium mill tailings cleaning treatment and no-waste uranium ore milling processes

International Nuclear Information System (INIS)

Wang Jintang

1990-01-01

The production of uranium mill tailings and their risk assessment are described. The moethods of uranium mill tailings disposal and management are criticized and the necessity of the researches for uranium mill tailings cleaning treatment and no-wasle uranium ore milling process are demonstrated. The progress for these researches in China and other countries with uranium production is reviewed, and the corresponding conclusions are reported

Energy and water saving measures at the Arloev sugar mill. Final report; Energi- och vattenbesparande aatgaerder vid Arloevs Sockerbruk. Slutrapport

Energy Technology Data Exchange (ETDEWEB)

Wamsler, M. [AAF-Processdesign AB, Malmoe (Sweden)

2001-10-01

The project comprised several, mutually dependent, sub-projects; mapping, investigation of ways to reduce water consumption, membrane tests aiming to find ways to recover sugar, and pinch analysis to evaluate the possibilities for improved process integration. This final report deals with the overall project results. Identified savings opportunities and savings potentials are presented. The presented measures represent an overall optimisation based on the results of all the project parts. Already during the project, measures have been implemented that are calculated to save 65 000 m{sup 3} water annually, corresponding to 10 % of the total water consumption. This saving is in level with the goals for the project. In the table below, these and additional measures are presented with a total savings potential at approximately 200 000 m{sup 3} /year water. The project will then achieve a saving of just below 35 % of present water consumption. Also in the membrane study the results surpassed the expectations. It was found that with nano filtering a sugar concentration of more than 10 %(W) could be reached in the retentate at a flux 50al/m{sup 2}h. The total sugar losses were less than 5 %, i.e. 95 % should be possible to recover. In total, a savings potential of more than 300 tonnes sugar per year is indicated. The Energy savings in the project are calculated to 7,4 GWh/year, of which 0,2 GWh/year by reduced water consumption, 0,6 GWh/year by water recovery, 1,4 GWh/year by membrane technology and 5,2aGWh/year as a result of process integration. This should be compared to the target 2,5 GWh/year. Hence, the results are almost three times the expected. The savings in monetary terms are estimated at just under SEK 5 million per year. The investment is roughly estimated at between SEK 5 and 6 million, of which SEK 4 million for the membrane equipment and SEK 0,5 million for a process water buffer tank. The remaining investment costs cover heat exchangers, control equipment

75 FR 49524 - Woodland Mills Corporation, Mill Spring, NC; Notice of Affirmative Determination Regarding...

Science.gov (United States)

2010-08-13

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,695] Woodland Mills Corporation, Mill Spring, NC; Notice of Affirmative Determination Regarding Application for Reconsideration By application dated July 22, 2010, petitioners requested administrative [[Page 49525

Review of the Drying Kinetics of Olive Oil Mill Wastes: Biomass Recovery

Directory of Open Access Journals (Sweden)

Francisco J. Gómez-de la Cruz

2015-06-01

Full Text Available The drying kinetics of olive oil mill wastes was analyzed based on experiments carried out by various researchers utilizing different drying systems. A critical review of the literature was done, and mathematical models of drying curves proposed by investigators were evaluated. A comparison between the best mathematical models of fit in the drying curves used in past experiments and a two-term Gaussian model was performed. This model improved all the results of fit in each experiment. Drying rates and drying stages were obtained and discussed. An average drying rate for each experiment from the two-term Gaussian model was calculated. This value allowed for visualizing and comparing the average speed of evaporated water in each experiment for the different dryers. Finally, and after having verified that almost all drying occurs mainly by a diffusion phenomenon, an analysis on the effective moisture diffusivity and activation energy values was performed. The results indicated that there was no dependency of these quantities on independent variables such as the drying air temperature, the drying air velocity, and the sample thickness. It follows that drying of olive oil mill wastes is a very complex physical process that depends heavily on aspects such as pieces of pit, pulp, skin, vegetation water, olive oil content, sugars and organics compounds of different nature.

76 FR 36512 - USDA Increases the Domestic Sugar Overall Allotment Quantity, Reassigns Domestic Cane Sugar...

Science.gov (United States)

2011-06-22

... imports. The OAQ was increased due to an increase in estimated sugar demand since the FY 2011 OAQ was... sugar imports, as required by law. Upon review of the domestic sugarcane processors' sugar marketing allocations relative to their FY 2011 expected raw sugar supplies, CCC determined that all sugarcane...

Sugar or high fructose corn syrup-what should nurses teach patients and families?

Science.gov (United States)

Sobel, Linda L; Dalby, Elizabeth

2014-04-01

There is lack of consensus in the lay literature to support consumption of table sugar as a preferred sweetener when compared to high fructose corn syrup (HFCS). The purpose of this study was to search the literature for evidence to determine the health effects of consumption of table sugar (sucrose) and HFCS on blood glucose, lipid levels, obesity, and appetite as well as to make recommendations for patient and family teaching of those at risk for developing negative health outcomes, including coronary heart disease. Nursing and health-related databases, including CINAHL, PubMed, Cochrane Central Registry of Controlled Trials, and Health and Wellness were searched for research articles, which were compared and evaluated for purpose, sample size, procedure, findings, and level of evidence. Five studies that met inclusion criteria were evaluated. No difference was found in changes in blood glucose levels, lipid levels, or appetite between table sugar consumption and HFCS consumption. When only fructose was consumed, lipid levels were significantly increased. The evidence suggests that fructose, found in both table sugar and HFCS, has a negative effect on health outcomes. Clinicians should teach patients and families that all sugar consumption should be closely monitored and kept below the 40 g/day recommended by the World Health Organization. © 2014 Sigma Theta Tau International.

FTIR characterization of Mexican honey and its adulteration with sugar syrups by using chemometric methods

Energy Technology Data Exchange (ETDEWEB)

Rios-Corripio, M A; Rojas-Lopez, M; Delgado-Macuil, R [CIBA-Tlaxcala, IPN, Tlaxcala, Tlax. (Mexico); Rios-Leal, E [CINVESTAV, Zacatenco, Mexico D.F. (Mexico)

2011-01-01

A chemometric analysis of adulteration of Mexican honey by sugar syrups such as corn syrup and cane sugar syrup was realized. Fourier transform infrared spectroscopy (FTIR) was used to measure the absorption of a group of bee honey samples from central region of Mexico. Principal component analysis (PCA) was used to process FTIR spectra to determine the adulteration of bee honey. In addition to that, the content of individual sugars from honey samples: glucose, fructose, sucrose and monosaccharides was determined by using PLS-FTIR analysis validated by HPLC measurements. This analytical methodology which is based in infrared spectroscopy and chemometry can be an alternative technique to characterize and also to determine the purity and authenticity of nutritional products as bee honey and other natural products.

Black holes with Yang-Mills hair

International Nuclear Information System (INIS)

Kleihaus, B.; Kunz, J.; Sood, A.; Wirschins, M.

1998-01-01

In Einstein-Maxwell theory black holes are uniquely determined by their mass, their charge and their angular momentum. This is no longer true in Einstein-Yang-Mills theory. We discuss sequences of neutral and charged SU(N) Einstein-Yang-Mills black holes, which are static spherically symmetric and asymptotically flat, and which carry Yang-Mills hair. Furthermore, in Einstein-Maxwell theory static black holes are spherically symmetric. We demonstrate that, in contrast, SU(2) Einstein-Yang-Mills theory possesses a sequence of black holes, which are static and only axially symmetric

Pulp mill as an energy producer

International Nuclear Information System (INIS)

Kaulamo, O.

1998-01-01

The recovery boilers of pulp mills are today the most significant producers of wood energy. The power-to-heat ratio of the power plant process, i.e., power yield, is poor in existing applications. In the study, an alternative of improving the power yield of conventional pulp mills significantly was studied by applying solutions used in power plants to a pulp mill. Extensive conversion of wood energy into electricity is possible only in the recovery boiler of the pulp mill and in a large combustion boiler of bark, wood waste and wood chips integrated to this boiler. Hence, the harvest and transports of wood raw materials, i.e. pulp wood and energy wood, are integrated, and the fraction going to cook and the energy wood fraction are separated at the pulp mill. The method guarantees competitive supply of energy wood. As a result a SELLUPOWER mill was designed, where the recovery boiler combusting black liquor and the large power plant boiler combusting energy wood are integrated to one unit and constructed to a power plant process with a high power-to-heat ratio. Necessary technical solutions, project costs and economical feasibility compared to a conventional pulp mill were determined, and the effect of different production-economical parameters was also studied. (orig.)

Discrimination of the glucose and the white sugar based on the pulsed laser-induced photoacoustic technique

Science.gov (United States)

Ren, Zhong; Liu, Guodong

2017-08-01

In this study, to discriminate the glucose and the white sugar gradient in the food, a noninvasive optical detection system based on pulsed laser-induced photoacoustic technique was developed. Meanwhile, the Nd: YAG 532nm pumped OPO pulsed laser was used as the excitation light source to generate of the photoacoustic signals of the glucose and white sugar. The focused ultrasonic transducer with central detection frequency of 1MHz was used to capture the photoacoustic signals. In experiments, the real-time photoacoustic signals of the glucose and the white sugar aqueous solutions were gotten and compared with each other. In addition, to discriminate the difference of the characteristic photoacoustic signals between both of them, the difference spectrum and the first order derivative technique between the peak-to-peak photoacoustic signals of the water and that of the glucose and white sugar were employed. The difference characteristic photoacoustic wavelengths between the glucose and the white sugar were found based on the established photoacoustic detection system. This study provides the potential possibility for the discrimination of the glucose and the white sugar by using the photoacoustic detection method.

Colorado's prospectus on uranium milling

International Nuclear Information System (INIS)

Hazle, A.J.; Franz, G.A.; Gamewell, R.

1982-01-01

The first part of this paper will discuss Colorado's control of uranium mill tailings under Titles I and II of the Uranium Mill Tailings Radiation Control Act of 1978. Colorado has a legacy of nine inactive mill sites requiring reclamation under Title I, and two presently active plus a number of new mill proposals which must be regulated in accordance with Title II. Past failures in siting and control on the part of federal jurisdictions have left the state with a heavy legacy requiring extensive effort to address impacts to the state's environment and population. The second part of this paper will discuss the remedial action programme authorized under Public Law 92-314 for Mesa Country, where lack of federal control led to the dispersal of several hundred thousand tons of uranium mill tailings on thousands of properties, including hundreds of homes, schools and other structures. Successful completion of the State efforts under both programmes will depend on a high level of funding and on the maintenance of adequate regulatory standards. (author)

Understanding dental CAD/CAM for restorations - dental milling machines from a mechanical engineering viewpoint. Part A: chairside milling machines.

Science.gov (United States)

Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

2016-01-01

The dental milling machine is an important device in the dental CAD/CAM chain. Nowadays, dental numerical controlled (NC) milling machines are available for dental surgeries (chairside solution). This article provides a mechanical engineering approach to NC milling machines to help dentists understand the involvement of technology in digital dentistry practice. First, some technical concepts and definitions associated with NC milling machines are described from a mechanical engineering viewpoint. The technical and economic criteria of four chairside dental NC milling machines that are available on the market are then described. The technical criteria are focused on the capacities of the embedded technologies of these milling machines to mill both prosthetic materials and types of shape restorations. The economic criteria are focused on investment costs and interoperability with third-party software. The clinical relevance of the technology is assessed in terms of the accuracy and integrity of the restoration.

John Stuart Mill: utilitarismo e liberalismo = John Stuart Mill: utilitarianism and liberalism

Directory of Open Access Journals (Sweden)

Simões, Mauro Cardoso

2013-01-01

Full Text Available Meu objetivo, neste trabalho, é investigar a compatibilidade das teses utilitaristas e liberais de John Stuart Mill. Apresentarei, inicialmente, os principais críticos da filosofia moral e política de Mill, para os quais o discípulo de Bentham teria abandonado o utilitarismo ou, ainda, não esclarecido suficientemente seu princípio da liberdade, o que o tornaria um pensador assistemático e inconsistente. Minha tese é contrária a tais interpretações, uma vez que sustenta ser Mill consistente. Em seguida, defenderei uma interpretação do princípio da liberdade e da individualidade, procurando demonstrar que seu utilitarismo é compatível com seu liberalismo

Combined pretreatment with hot compressed water and wet disk milling opened up oil palm biomass structure resulting in enhanced enzymatic digestibility.

Science.gov (United States)

Zakaria, Mohd Rafein; Hirata, Satoshi; Fujimoto, Shinji; Hassan, Mohd Ali

2015-10-01

Combined pretreatment with hot compressed water and wet disk milling was performed with the aim to reduce the natural recalcitrance of oil palm biomass by opening its structure and provide maximal access to cellulase attack. Oil palm empty fruit bunch and oil palm frond fiber were first hydrothermally pretreated at 150-190° C and 10-240 min. Further treatment with wet disk milling resulted in nanofibrillation of fiber which caused the loosening of the tight biomass structure, thus increasing the subsequent enzymatic conversion of cellulose to glucose. The effectiveness of the combined pretreatments was evaluated by chemical composition changes, power consumption, morphological alterations by SEM and the enzymatic digestibility of treated samples. At optimal pretreatment process, approximately 88.5% and 100.0% of total sugar yields were obtained from oil palm empty fruit bunch and oil palm frond fiber samples, which only consumed about 15.1 and 23.5 MJ/kg of biomass, respectively. Copyright © 2015 Elsevier Ltd. All rights reserved.

75 FR 53013 - Fiscal Year 2011 Tariff-rate Quota Allocations for Raw Cane Sugar, Refined and Specialty Sugar...

Science.gov (United States)

2010-08-30

... for Raw Cane Sugar, Refined and Specialty Sugar, and Sugar-containing Products; Revision AGENCY... August 17, 2010 concerning Fiscal Year 2011 tariff-rate quota allocations of raw cane sugar, refined and special sugar, and sugar-containing products. USTR is revising the effective date of that notice to...

Worldwide trends in dietary sugars intake.

Science.gov (United States)

Wittekind, Anna; Walton, Janette

2014-12-01

Estimating trends in dietary intake data is integral to informing national nutrition policy and monitoring progress towards dietary guidelines. Dietary intake of sugars is a controversial public health issue and guidance in relation to recommended intakes is particularly inconsistent. Published data relating to trends in sugars intake are relatively sparse. The purpose of the present review was to collate and review data from national nutrition surveys to examine changes and trends in dietary sugars intake. Only thirteen countries (all in the developed world) appear to report estimates of sugars intake from national nutrition surveys at more than one point in time. Definitions of dietary sugars that were used include 'total sugars', 'non-milk extrinsic sugars', 'added sugars', sucrose' and 'mono- and disaccharides'. This variability in terminology across countries meant that comparisons were limited to within countries. Hence trends in dietary sugars intake were examined by country for the whole population (where data permitted), and for specific or combined age and sex subpopulations. Findings indicate that in the majority of population comparisons, estimated dietary sugars intake is either stable or decreasing in both absolute (g/d) and relative (% energy) terms. An increase in sugars intake was observed in few countries and only in specific subpopulations. In conclusion, the findings from the present review suggest that, in the main, dietary sugars intake are decreasing or stable. A consistent approach to estimation of dietary sugars intake from national nutrition surveys is required if more valid estimates of changes in dietary sugars intakes are required in the future.

Optimization of FIB milling for rapid NEMS prototyping

DEFF Research Database (Denmark)

Malm, Bjarke; Petersen, Dirch Hjorth; Lei, Anders

2011-01-01

We demonstrate an optimized milling technique to focused ion beam (FIB) milling in template silicon membranes for fast prototyping of nanoelectromechanical systems (NEMS). Using a single-pass milling strategy the highly topology dependent sputtering rate is boosted and shorter milling time...... is achieved. Drift independence is obtained for small critical features using a radial scan strategy, and a back scan routine ensures minimal line width deviation removing redeposited material. Milling a design similar to a nano four-point probe with a pitch down to 400nm we display what optimized FIB milling...

National/international R and D programs on uranium mill tailings

International Nuclear Information System (INIS)

Hamel, P.E.

1981-05-01

The mining and milling of uranium ores results in the production of large quantities of wastes containing low concentrations of radionuclides such as uranium, thorium, radium, radon and their daughter products. The current concern of the regulatory authorities is with the extent of the problems and the disposal methods that must be required now to ensure that an acceptable level of protection is maintained in the long term. This concern is the subject of a number of R and D programs. In Canada, the Technical Planning Group on Uranium Tailings was established to review ongoing activities and to plan a research program on the management of wastes after the mine and mill have shut down. The Group has completed its review and a report containing its conclusions and recommendations for a proposed national R and D program has been prepared. Included is a proposal for a centralized organizational structure for the coordination and managment of the total program which is to be supported jointly by the federal government, two (Ontario, Saskatchewan) provincial governments, and uranium producers. At the international level, the Nuclear Energy Agency originated, in 1979, a program to study the extent of the long-term problems of uranium mill tailings, and to develop an internationally acceptable methodology for making rational decisions regarding their long-term management taking into account the ICRP principles and system of dose limitation

Yang-Mills theory for non-semisimple groups

CERN Document Server

Nuyts, J; Nuyts, Jean; Wu, Tai Tsun

2003-01-01

For semisimple groups, possibly multiplied by U(1)'s, the number of Yang-Mills gauge fields is equal to the number of generators of the group. In this paper, it is shown that, for non-semisimple groups, the number of Yang-Mills fields can be larger. These additional Yang-Mills fields are not irrelevant because they appear in the gauge transformations of the original Yang-Mills fields. Such non-semisimple Yang-Mills theories may lead to physical consequences worth studying. The non-semisimple group with only two generators that do not commute is studied in detail.

Chevron's Panna Maria mill process description

International Nuclear Information System (INIS)

Anon.

1979-01-01

Key features of Chevron's Uranium Mill located near Panna Maria, Texas, are described. The mill is designed to process a nominal 2500 dry tons/day of uranium bearing ore containing 15% uncombined moisture. The following operations at the mill are highlighted: ore receiving, grinding, leaching, countercurrent decantation and tailings disposal, filtering, solvent extraction, solvent stripping, precipitation, drying, and packaging

VOC Control in Kraft Mills; FINAL

International Nuclear Information System (INIS)

Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

2001-01-01

The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA)

Methods for dehydration of sugars and sugar alcohols

Science.gov (United States)

Holladay, Johnathan E [Kennewick, WA; Hu, Jianli [Kennewick, WA; Zhang, Xinjie [Burlington, MA; Wang, Yong [Richland, WA

2010-08-10

The invention includes a method of dehydration of a sugar using a dehydration catalyst and a co-catalyst within a reactor. A sugar is introduced and H.sub.2 is flowed through the reactor at a pressure of less than or equal to about 300 psig to convert at least some of the sugar into an anhydrosugar product. The invention includes a process for producing isosorbide. A starting material comprising sorbitol is flowed into a reactor. H.sub.2 is counter flowed through the reactor. The starting material is exposed to a catalyst in the presence of a co-catalyst which comprises at least one metal. The exposing is conducted at a hydrogen pressure of less than or equal to 300 psig within the reactor and the hydrogen removes at least some of any water present during the exposing and inhibits formation of colored byproducts.

Exposure to Paper Mill Effluent at a Site in North Central Florida Elicits Molecular-Level Changes in Gene Expression Indicative of Progesterone and Androgen Exposure

OpenAIRE

Brockmeier, Erica K.; Jayasinghe, B. Sumith; Pine, William E.; Wilkinson, Krystan A.; Denslow, Nancy D.

2014-01-01

Endocrine disrupting compounds (EDCs) are chemicals that negatively impact endocrine system function, with effluent from paper mills one example of this class of chemicals. In Florida, female Eastern mosquitofish (Gambusia holbrooki) have been observed with male secondary sexual characteristics at three paper mill-impacted sites, indicative of EDC exposure, and are still found at one site on the Fenholloway River. The potential impacts that paper mill effluent exposure has on the G. holbrooki...

Galilean Yang-Mills theory

Energy Technology Data Exchange (ETDEWEB)

Bagchi, Arjun [Center for Theoretical Physics, Massachusetts Institute of Technology,77 Massachusetts Avenue, Cambridge, MA 02139 (United States); Basu, Rudranil [Saha Institute of Nuclear Physics,Block AF, Sector 1, Bidhannagar, Kolkata 700068 (India); Kakkar, Ashish [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Mehra, Aditya [Indian Institute of Science Education and Research,Dr Homi Bhabha Road, Pashan. Pune 411008 (India); Van Swinderen Institute for Particle Physics and Gravity, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands)

2016-04-11

We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

Galilean Yang-Mills theory

International Nuclear Information System (INIS)

Bagchi, Arjun; Basu, Rudranil; Kakkar, Ashish; Mehra, Aditya

2016-01-01

We investigate the symmetry structure of the non-relativistic limit of Yang-Mills theories. Generalising previous results in the Galilean limit of electrodynamics, we discover that for Yang-Mills theories there are a variety of limits inside the Galilean regime. We first explicitly work with the SU(2) theory and then generalise to SU(N) for all N, systematising our notation and analysis. We discover that the whole family of limits lead to different sectors of Galilean Yang-Mills theories and the equations of motion in each sector exhibit hitherto undiscovered infinite dimensional symmetries, viz. infinite Galilean Conformal symmetries in D=4. These provide the first examples of interacting Galilean Conformal Field Theories (GCFTs) in D>2.

Exposure to paper mill effluent at a site in North Central Florida elicits molecular-level changes in gene expression indicative of progesterone and androgen exposure.

Directory of Open Access Journals (Sweden)

Erica K Brockmeier

Full Text Available Endocrine disrupting compounds (EDCs are chemicals that negatively impact endocrine system function, with effluent from paper mills one example of this class of chemicals. In Florida, female Eastern mosquitofish (Gambusia holbrooki have been observed with male secondary sexual characteristics at three paper mill-impacted sites, indicative of EDC exposure, and are still found at one site on the Fenholloway River. The potential impacts that paper mill effluent exposure has on the G. holbrooki endocrine system and the stream ecosystem are unknown. The objective of this study was to use gene expression analysis to determine if exposure to an androgen receptor agonist was occurring and to couple this analysis with in vitro assays to evaluate the presence of androgen and progesterone receptor active chemicals in the Fenholloway River. Focused gene expression analyses of masculinized G. holbrooki from downstream of the Fenholloway River paper mill were indicative of androgen exposure, while genes related to reproduction indicated potential progesterone exposure. Hepatic microarray analysis revealed an increase in the expression of metabolic genes in Fenholloway River fish, with similarities in genes and biological processes compared to G. holbrooki exposed to androgens. Water samples collected downstream of the paper mill and at a reference site indicated that progesterone and androgen receptor active chemicals were present at both sites, which corroborates previous chemical analyses. Results indicate that G. holbrooki downstream of the Fenholloway River paper mill are impacted by a mixture of both androgens and progesterones. This research provides data on the mechanisms of how paper mill effluents in Florida are acting as endocrine disruptors.

Texture formation in iron particles using mechanical milling with graphite as a milling aid

Energy Technology Data Exchange (ETDEWEB)

Motozuka, S.; Hayashi, K. [Department of Mechanical Engineering, Gifu National College of Technology, 2236-2 Kamimakuwa, Motosu, Gifu 501-0495 (Japan); Tagaya, M. [Department of Materials Science and Technology, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Morinaga, M. [Toyota Physical and Chemical Research Institute, 41-1, Yokomichi, Nagakute, Aichi 480-1192 (Japan)

2015-09-15

Crystallographically anisotropic platelet iron particles were successfully prepared using a conventional ball mill with addition of graphite (Gp) particles. The morphological and structural changes resulting from the milling were investigated using scanning electron microscopy and X-ray diffraction. The spherical iron particles were plastically deformed into platelet shapes during the milling. Simultaneously, it is suggested that the size of the Gp particles decreased and adhered as nanoparticles on the surface of the iron particles. The adhered Gp particles affected the plastic deformation behavior of the iron particles: the (001) planes of α-iron were oriented parallel to the particle face, and no preferred in-plane orientation was observed. This study not only details the preparation of soft magnetic metal particles that crystallographically oriented to enhance their magnetic properties but also provides new insight into the activities of the well-established and extensively studied mechanical milling method.

Texture formation in iron particles using mechanical milling with graphite as a milling aid

International Nuclear Information System (INIS)

Motozuka, S.; Hayashi, K.; Tagaya, M.; Morinaga, M.

2015-01-01

Crystallographically anisotropic platelet iron particles were successfully prepared using a conventional ball mill with addition of graphite (Gp) particles. The morphological and structural changes resulting from the milling were investigated using scanning electron microscopy and X-ray diffraction. The spherical iron particles were plastically deformed into platelet shapes during the milling. Simultaneously, it is suggested that the size of the Gp particles decreased and adhered as nanoparticles on the surface of the iron particles. The adhered Gp particles affected the plastic deformation behavior of the iron particles: the (001) planes of α-iron were oriented parallel to the particle face, and no preferred in-plane orientation was observed. This study not only details the preparation of soft magnetic metal particles that crystallographically oriented to enhance their magnetic properties but also provides new insight into the activities of the well-established and extensively studied mechanical milling method

Ambient aerosol concentrations of sugars and sugar-alcohols at four different sites in Norway

Directory of Open Access Journals (Sweden)

K. E. Yttri

2007-08-01

Full Text Available Sugars and sugar-alcohols are demonstrated to be important constituents of the ambient aerosol water-soluble organic carbon fraction, and to be tracers for primary biological aerosol particles (PBAP. In the present study, levels of four sugars (fructose, glucose, sucrose, trehalose and three sugar-alcohols (arabitol, inositol, mannitol in ambient aerosols have been quantified using a novel HPLC/HRMS-TOF (High Performance Liquid Chromatography in combination with High Resolution Mass Spectrometry – Time of Flight method to assess the contribution of PBAP to PM>sub>10 and PM_2.5. Samples were collected at four sites in Norway at different times of the year in order to reflect the various contributing sources and the spatial and seasonal variation of the selected compounds.

Sugars and sugar-alcohols were present at all sites investigated, underlining the ubiquity of these highly polar organic compounds. The highest concentrations were reported for sucrose, reaching a maximum concentration of 320 ng m⁻³ in PM₁₀ and 55 ng m⁻³ in PM_2.5. The mean concentration of sucrose was up to 10 times higher than fructose, glucose and the dimeric sugar trehalose. The mean concentrations of the sugar-alcohols were typically lower, or equal, to that of the monomeric sugars and trehalose. Peak concentrations of arabitol and mannitol did not exceed 30 ng m⁻³ in PM₁₀, and for PM_2.5 all concentrations were below 6 ng m⁻³.

Sugars and sugar-alcohols were associated primarily with coarse aerosols except during wintertime at the suburban site in Elverum, where a shift towards sub micron aerosols was observed. It is proposed that this shift was due to the intensive use of wood burning for residential heating at this site during winter, confirmed by high concurrent concentrations of levoglucosan. Elevated concentrations of sugars in PM₂

Relationships between soluble sugar concentrations in roots and ecosystem stress for first-year sugar maple seedlings

Energy Technology Data Exchange (ETDEWEB)

McLaughlin, J.W.; Reed, D.D.; Jurgensen, M.F.; Mroz, G.D.; Bagley, S.T. [Michigan Technological University, Houghton, MI (United States). School of Forestry and Wood Products

1996-03-01

Accumulation of reducing sugars (i.e. glucose and fructose) in plant roots has been consistently correlated with forest dieback and decline and, therefore, has potential as a biological indicator of ecosystem stress. In this study, the relationships between acidic deposition and `natural` (temperature, mycorrhizae, and nutrition) factors with first-year sugar maple seedling root sugar concentrations and growth were assessed in two sugar maple dominated forests in Michigan. Seedlings at the southern site (Wellston) had greater root growth, phosphorus, total sugar, and sucrose concentrations in roots, but lower reducing sugar concentration in roots. In addition, percent root length colonized by vesicular-arbuscular mycorrhizal fungi was less than that found for seedlings growing at the northern site (Alberta). Throughfall deposition of nitrate, sulfate, and hydrogen ions was not significantly correlated with seedling total or reducing sugar concentration. Total sugar concentration in seedling roots was positively correlated with air and soil temperatures at the southern site, but not at the northern site. Seedling tissue phosphorus concentration was correlated with total sugars at both sites, with sucrose at the southern site, and reducing sugars at the northern site. Mycorrhizal colonization rates at the Alberta site were positively correlated with reducing sugar concentration in seedling roots and negatively correlated with sucrose concentration. The results suggest that differences in seedling root sugar concentrations in these two forests are related to seedling root growth and are most likely due to ecological variables, such as available soil phosphorus, temperature, and growing season length through some complex interaction with mycorrhizae rather than acidic deposition stress. 56 refs., 3 figs.

Life Cycle Assessment of Sugar Production (VB)

DEFF Research Database (Denmark)

Teljigovic, Mehmed; Mengiardi, Jon; Factor, Gabriela

1999-01-01

The environmental organisation NOAH has proposed carrying out an environmental assessment of two different sugar productions (using sugar beet or sugar cane) in order to illustrate which of the systems has a higher environmental impact for sugar consumption in Denmark. Therefore a comparison...... will be made between sugar from sugar beet produced in Denmark versus sugar produces from sugar cane in a tropical country, Brazil, and transported afterwards to Denmark. To evaluate the environmental aspects of these two product systems a Life Cycle Assessement (LCA) will be carried out.From the results...... obtained in the present LCA of sugar produces from sugar canes or sugar beet it is difficult to make an immediate choice between the two possibilities. Indeed, Quantitative results from the EDIP (Environmental Design of Industrial Products) software are globally similar for both ways of producing sugar...

78 FR 63159 - Amendment to Certification of Nebraska's Central Filing System

Science.gov (United States)

2013-10-23

..., Raspberries, Rye, Seed crops, Sheep & Lambs, Silage, Sorghum Grain, Soybeans, Squash, Strawberries, Sugar....usda.gov ). Farm products covered by a State's central filing system are also identified through the GIPSA Web site. The Nebraska central filing system covers specified farm products. We originally...

Analytic Solution to the Problem of Aircraft Electric Field Mill Calibration

Science.gov (United States)

Koshak, W. J.

2003-12-01

It is by no means a simple task to retrieve storm electric fields from an aircraft instrumented with electric field mill sensors. The presence of the aircraft distorts the ambient field in a complicated way. Before retrievals of the storm field can be made, the field mill measurement system must be "calibrated". In other words, a relationship between impressed (i.e., ambient) electric field and mill output must be established. If this relationship can be determined, it is mathematically inverted so that ambient field can be inferred from the mill outputs. Previous studies have primarily focused on linear theories where the "relationship" between ambient field and mill output is described by a "calibration matrix" M. Each element of the matrix describes how a particular component of the ambient field is enhanced by the aircraft. For example the product MixEx is the contribution of the Ex field to the ith mill output. Similarly, net aircraft charge (described by a "charge field component" Eq) contributes an amount MiqEq to the output of the ith sensor. The central difficulty in obtaining M stems from the fact that the impressed field (Ex, Ey, Ez, Eq) is not known but is instead estimated. Typically, the aircraft is flown through a series of roll and pitch maneuvers in fair weather, and the values of the fair weather field and aircraft charge are estimated at each point along the aircraft trajectory. These initial estimates are often highly inadequate, but several investigators have improved the estimates by implementing various (ad hoc) iterative methods. Though numerical tests show that some of the iterative methods do improve the initial estimates, none of the iterative methods guarantee absolute convergence to the true values, or even to values reasonably close to the true values when measurement errors are present. In this work, the mathematical problem is solved directly by analytic means. For m mills installed on an arbitrary aircraft, it is shown that it is

Current uranium mill licensing issues

International Nuclear Information System (INIS)

Scarano, R.A.

1977-01-01

The problems encountered to insure environmentally safe mining and milling of uranium ores are reviewed. Emphasis is placed on the management of tailings resulting from milling operations. It is pointed out that although the concentration of radioactivity in the tailings is relatively low, control measures are necessary because of the large quantities involved and because of the long half-life of the parent radionuclides present. The major concerns with mill tailings are radon release to the atmosphere and isolation of the tailings from the human environment. Since it is anticipated that the amount of tailings created by the year 2000 will be more than an order of magnitude greater than the quantities that have been generated during the past 30 years, it is recommended that all mill tailings storage areas be located remote from public contact and in areas such that disruption and dispersion by natural forces and seepage of toxic materials into ground water systems are reduced to the maximum extent achievable. Technical issues that receive attention during the NRC licensing process for uranium mills and the preparation of environmental impact statements are discussed briefly

Biofuel manufacturing from woody biomass: effects of sieve size used in biomass size reduction.

Science.gov (United States)

Zhang, Meng; Song, Xiaoxu; Deines, T W; Pei, Z J; Wang, Donghai

2012-01-01

Size reduction is the first step for manufacturing biofuels from woody biomass. It is usually performed using milling machines and the particle size is controlled by the size of the sieve installed on a milling machine. There are reported studies about the effects of sieve size on energy consumption in milling of woody biomass. These studies show that energy consumption increased dramatically as sieve size became smaller. However, in these studies, the sugar yield (proportional to biofuel yield) in hydrolysis of the milled woody biomass was not measured. The lack of comprehensive studies about the effects of sieve size on energy consumption in biomass milling and sugar yield in hydrolysis process makes it difficult to decide which sieve size should be selected in order to minimize the energy consumption in size reduction and maximize the sugar yield in hydrolysis. The purpose of this paper is to fill this gap in the literature. In this paper, knife milling of poplar wood was conducted using sieves of three sizes (1, 2, and 4 mm). Results show that, as sieve size increased, energy consumption in knife milling decreased and sugar yield in hydrolysis increased in the tested range of particle sizes.

Would John Stuart Mill have regulated pornography?

OpenAIRE

McGlynn, C.; Ward, I.

2014-01-01

John Stuart Mill dominates contemporary pornography debates where he is routinely invoked as an authoritative defence against regulation. This article, by contrast, argues that a broader understanding of Mill's ethical liberalism, his utilitarianism, and his feminism casts doubt over such an assumption. New insights into Mill's approach to sex, sexual activity, and the regulation of prostitution reveal an altogether more nuanced and activist approach. We conclude that John Stuart Mill would a...

Experimental and kinetics study for phytoremediation of sugar mill effluent using water lettuce (Pistia stratiotes L.) and its end use for biogas production.

Science.gov (United States)

Kumar, Vinod; Singh, Jogendra; Pathak, V V; Ahmad, Shamshad; Kothari, Richa

2017-10-01

In present study, the performance of phytoremediation by Pistia stratiotes on sugar mill effluent (SME) and its end use for biogas production are investigated. The objectives of the study are to determine the nutrient and pollution reduction efficiency of P. stratiotes from SME and evaluation of its biomass as a feedstock for biogas production. Various concentrations of SME (25, 50, 75, and 100%) were remediated by Pistia stratiotes (initial weight; 150 g) outdoor for 60 days under batch mode experimental setup. The results showed that P. stratiotes achieved marked reduction in nutrient (TKN, 72.86%; TP, 71.49%) and pollutant load (EC, 25.69%; TDS, 57.26%; BOD, 69.40%; COD, 61.80%; Ca 2+ , 56.79%; Mg 2+ , 55.01%; Na + , 42.86%; K + , 54.38%; MPN, 78.13%; SPC, 60.13%) from 75% SME at the end of the experiment. The highest biomass (328.48 ± 2.04 g) and chlorophyll content (3.62 ± 3.04 mg/g) were also achieved with 75% SME. The dried biomass of P. stratiotes (from 75% SME) was inoculated with cow dung (10% w/v) and diluted with distilled water (1:10). The whole content was used as a substrate for the biogas production within hydraulic retention time (HRT) of 30 days at room temperature. Substrate parameters such as pH, TS (%), COD (mg/L), TKN (%), TOC (%), VS (%), and C/N ratio were reduced from 7.85 to 6.0, 66.65 to 28.65%, 12,900 to 2800 mg/L, 0.95 to 0.75%, 45.54 to 19.5%, 76.87 to 28.78%, and 47.94 to 26.00, respectively, in 30 days of HRT. About 8478.6 mL of cumulative biogas production was evaluated by modified Gompertz equation. Thus, the present investigation not only achieved efficient nutrient and pollution reduction from SME but also proved the potential of P. stratiotes for biogas production.

A trial of sugar-free or sugar-sweetened beverages and body weight in children

NARCIS (Netherlands)

de Ruyter, Janne C; Olthof, Margreet R; Seidell, Jacob C; Katan, Martijn B

2012-01-01

BACKGROUND: The consumption of beverages that contain sugar is associated with overweight, possibly because liquid sugars do not lead to a sense of satiety, so the consumption of other foods is not reduced. However, data are lacking to show that the replacement of sugar-containing beverages with

Improving milling and production of a dust-producing unit equipped with hammer mills

Energy Technology Data Exchange (ETDEWEB)

Vorotnikov, Ye.G.; Nikiforov, A.A.; Rasputin, O.V.; Sukhunin, V.I.

1982-01-01

This paper presents generalized experience for deriving coarse ground coal dust in hammer mills by providing comparison data on improving efficiency of operation of the unit when switching to a coarser-type grind of the fuel. Need to have more precise formulas to calculate grinding potential of hammer mills when using a coarser grind is shown.

Wear of micro end mills

DEFF Research Database (Denmark)

Bissacco, Giuliano; Hansen, Hans Nørgaard; De Chiffre, Leonardo

2005-01-01

This paper addresses the important issue of wear on micro end mills considering relevant metrological tools for its characterization and quantification. Investigation of wear on micro end mills is particularly difficult and no data are available in the literature. Small worn volumes cause large...... part. For this investigation 200 microns end mills are considered. Visual inspection of the micro tools requires high magnification and depth of focus. 3D reconstruction based on scanning electron microscope (SEM) images and stereo-pair technique is foreseen as a possible method for quantification...

Ball-milling-induced crystallization and ball-milling effect on thermal crystallization kinetics in an amorphous FeMoSiB alloy

International Nuclear Information System (INIS)

Guo, F.Q.; Lu, K.

1997-01-01

Microstructure evolution in a melt-spun amorphous Fe 77.2 Mo 0.8 Si 9 B 13 alloy subjected to high-energy ball milling was investigated by means of X-ray diffraction (XRD), a transmission electron microscope (TEM), and a differential scanning calorimeter (DSC). It was found that during ball milling, crystallization occurs in the amorphous ribbon sample with precipitation of an α-Fe solid solution, and the amorphous sample crystallizes completely into a single α-Fe nanostructure (rather than α-Fe and borides as in the usual thermal crystallization products) when the milling time exceeds 135 hours. The volume fraction of material crystallized was found to be approximately proportional to the milling time. The fully crystallized sample with a single α-Fe nanophase exhibits an intrinsic thermal stability against phase separation upon annealing at high temperatures. The ball-milling effect on the subsequent thermal crystallization of the amorphous phase in an as-milled sample was studied by comparison of the crystallization products and kinetic parameters between the as-quenched amorphous sample and the as-milled sample was studied by comparison of the crystallization products and kinetic parameters between the as-quenched amorphous sample and the as-milled partially crystallized samples. The crystallization temperatures and activation energies for the crystallization processes of the residual amorphous phase were considerably decreased due to ball milling, indicating that ball milling has a significant effect on the depression of thermal stability of the residual amorphous phase

Preparation of natural pyrite nanoparticles by high energy planetary ball milling as a nanocatalyst for heterogeneous Fenton process

Energy Technology Data Exchange (ETDEWEB)

Fathinia, Siavash [Department of Mining Engineering, Faculty of Engineering and Technology, Imam Khomeini International University, Qazvin (Iran, Islamic Republic of); Research Laboratory of Advanced Water and Wastewater Treatment Processes, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz (Iran, Islamic Republic of); Fathinia, Mehrangiz [Research Laboratory of Advanced Water and Wastewater Treatment Processes, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz (Iran, Islamic Republic of); Rahmani, Ali Akbar [Department of Mining Engineering, Faculty of Engineering and Technology, Imam Khomeini International University, Qazvin (Iran, Islamic Republic of); Khataee, Alireza, E-mail: a_khataee@tabrizu.ac.ir [Research Laboratory of Advanced Water and Wastewater Treatment Processes, Department of Applied Chemistry, Faculty of Chemistry, University of Tabriz, Tabriz (Iran, Islamic Republic of)

2015-02-01

Graphical abstract: - Highlights: • Pyrite nanoparticles were successfully produced by planetary ball milling process. • The physical and chemical properties of pyrite nanoparticles were fully examined. • The degradation of AO7 was notably enhanced by pyrite nanoparticles Fenton system. • The influences of basic operational parameters were investigated using CCD. - Abstract: In the present study pyrite nanoparticles were prepared by high energy mechanical ball milling utilizing a planetary ball mill. Various pyrite samples were produced by changing the milling time from 2 h to 6 h, in the constant milling speed of 320 rpm. X-ray diffraction (XRD), scanning electron microscopy (SEM) linked with energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FT-IR) analysis and Brunauer–Emmett–Teller (BET) were performed to explain the characteristics of primary (unmilled) and milled pyrite samples. The average particle size distribution of the produced pyrite during 6 h milling was found to be between 20 nm and 100 nm. The catalytic performance of the different pyrite samples was examined in the heterogeneous Fenton process for degradation of C.I. Acid Orange 7 (AO7) solution. Results showed that the decolorization efficiency of AO7 in the presence of 6 h-milled pyrite sample was the highest. The impact of key parameters on the degradation efficiency of AO7 by pyrite nanoparticles catalyzed Fenton process was modeled using central composite design (CCD). Accordingly, the maximum removal efficiency of 96.30% was achieved at initial AO7 concentration of 16 mg/L, H{sub 2}O{sub 2} concentration of 5 mmol/L, catalyst amount of 0.5 g/L and reaction time of 25 min.

Effects of milling on functional properties of rice flour.

Science.gov (United States)

Kadan, R S; Bryant, R J; Miller, J A

2008-05-01

A commercial long-grain rice flour (CRF) and the flours made by using a pin mill and the Udy mill from the same batch of broken second-head white long-grain rice were evaluated for their particle size and functional properties. The purpose of this study was to compare the commercial rice flour milling method to the pin and Udy milling methods used in our laboratory and pilot plant. The results showed that pin milled flour had more uniform particle size than the other 2 milled flours. The chalky kernels found in broken white milled rice were pulverized more into fines in both Udy milled flour and CRF than in the pin milled flour. The excessive amount of fines in flours affected their functional properties, for example, WSI and their potential usage in the novel foods such as rice breads (RB). The RB made from CRF collapsed more than loaves made from pin milled Cypress long-grain flours.

Sugar holograms with erioglaucine and tartrazine

Science.gov (United States)

Mejias-Brizuela, N. Y.; Olivares-Pérez, A.; Páez-Trujillo, G.; Fuentes-Tapia, I.

2007-09-01

An artificial green colorant, composed by erioglaucine (Blue 1) and tartrazine (Yellow 5), was employed in a sugar matrix to improve the material sensibility and to make a comparative analysis of the diffraction efficiency parameter, for holograms replications, the holographic pattern was obtained by a computer and recorded in sugar films and in modified sugar (sugar-colorant). Conventional lithography and UV radiation were used. The results show that the behavior diffraction efficiency of the sugar-colorant films is slightly larger than in the sugar matrix under the same recording conditions.

77 FR 14837 - Bioassay at Uranium Mills

Science.gov (United States)

2012-03-13

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0057] Bioassay at Uranium Mills AGENCY: Nuclear Regulatory..., ``Bioassay at Uranium Mills.'' This guide describes a bioassay program acceptable to the NRC staff for uranium mills and applicable portions of uranium conversion facilities where the possibility of exposure...

Conclusions and recommendations of the SCOPE-RADSITE workshop on remediation achievements after uranium mining and milling

International Nuclear Information System (INIS)

Vandenhove, H.; Vandecasteele, C.M.; Collard, G.

2002-01-01

The SCOPE-RADSITE Project provides a unique international scientific forum where the radioactive wastes generated in the development of nuclear weapons, including their potential impact on the environment and human populations, are studied and reviewed. At the present SCOPE-RADSITE workshop a team of experts presented the current status of uranium mining and milling operations in the United States, in the former Soviet Union (FSU) and in Central and Eastern Europe. The effect of radiocontaminants resulting from the uranium mining and milling operations to species other than humans and the combined effects of environmental radiation and other agents were discussed. Finally, three cases of remediation projects were presented: remediation at COGEMA sites in France, the WISMUT rehabilitation project in Germany and uranium mine reclamation in Texas and remediation achievements were described. Finally the workshop discussed important issues and recommendations to be considered when approaching remediation of past legacies resulting from uranium mining and milling. (author)

Transcription Factor AREB2 Is Involved in Soluble Sugar Accumulation by Activating Sugar Transporter and Amylase Genes.

Science.gov (United States)

Ma, Qi-Jun; Sun, Mei-Hong; Lu, Jing; Liu, Ya-Jing; Hu, Da-Gang; Hao, Yu-Jin

2017-08-01

Sugars play important roles in plant growth and development, crop yield and quality, as well as responses to abiotic stresses. Abscisic acid (ABA) is a multifunctional hormone. However, the exact mechanism by which ABA regulates sugar accumulation is largely unknown in plants. Here, we tested the expression profile of several sugar transporter and amylase genes in response to ABA treatment. MdSUT2 and MdAREB2 were isolated and genetically transformed into apple ( Malus domestica ) to investigate their roles in ABA-induced sugar accumulation. The MdAREB2 transcription factor was found to bind to the promoters of the sugar transporter and amylase genes and activate their expression. Both MdAREB2 and MdSUT2 transgenic plants produced more soluble sugars than controls. Furthermore, MdAREB2 promoted the accumulation of sucrose and soluble sugars in an MdSUT2 -dependent manner. Our results demonstrate that the ABA-responsive transcription factor MdAREB2 directly activates the expression of amylase and sugar transporter genes to promote soluble sugar accumulation, suggesting a mechanism by which ABA regulates sugar accumulation in plants. © 2017 American Society of Plant Biologists. All Rights Reserved.

Soil Carbon 4 per mille

Science.gov (United States)

Minasny, Budiman; van Wesemael, Bas

2017-04-01

The '4 per mille Soils for Food Security and Climate' was launched at the COP21 aiming to increase global soil organic matter stocks by 4 per mille (or 0.4 %) per year as a compensation for the global emissions of greenhouse gases by anthropogenic sources. This paper surveyed the soil organic carbon (SOC) stock estimates and sequestration potentials from 20 regions in the world (New Zealand, Chile, South Africa, Australia, Tanzania, Indonesia, Kenya, Nigeria, India, China Taiwan, South Korea, China Mainland, United States of America, France, Canada, Belgium, England & Wales, Ireland, Scotland, and Russia) and asked whether the 4 per mille initiative is feasible. This study highlights region specific efforts and scopes for soil carbon sequestration. Reported soil C sequestration rates generally show that under best management practices, 4 per mille or even higher sequestration rates can be accomplished. High C sequestration rates (up to 10 per mille) can be achieved for soils with low initial SOC stock (topsoil less than 30 t C ha-1), and at the first twenty years after implementation of best management practices. In addition, areas that have reached equilibrium but not at their saturation level will not be able to further increase their sequestration. We found that most studies on SOC sequestration globally only consider topsoil (up to 0.3 m depth), as it is considered to be most affected by management techniques. The 4 per mille initiative was based on a blanket calculation of the whole global soil profile C stock, however the potential to increase SOC is mostly on managed agricultural lands. If we consider 4 per mille on global topsoil of agricultural land, SOC sequestration is about 3.6 Gt C per year, which effectively offset 40% of global anthropogenic greenhouse gas emissions. As a strategy for climate change mitigation, soil carbon sequestration buys time over the next ten to twenty years while other effective sequestration and low carbon technologies become

40 CFR 61.142 - Standard for asbestos mills.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standard for asbestos mills. 61.142... § 61.142 Standard for asbestos mills. (a) Each owner or operator of an asbestos mill shall either discharge no visible emissions to the outside air from that asbestos mill, including fugitive sources, or...

Declining consumption of added sugars and sugar-sweetened beverages in Australia: a challenge for obesity prevention.

Science.gov (United States)

Brand-Miller, Jennie C; Barclay, Alan W

2017-04-01

Background: Reduced intakes of added sugars and sugar-sweetened beverages (SSBs) have been the main focus of efforts to stall obesity. Although obesity has risen steeply in Australia, some evidence suggests that added-sugars and SSB intakes have declined over the same time frame. Objective: We investigated recent trends in the availability of sugars and sweeteners and changes in intakes of total sugars, added sugars, and SSBs in Australia by using multiple, independent data sources. Design: The study was designed to compare relevant data published by the Food and Agriculture Organization of the United Nations [FAO Statistics Division Database (FAOSTAT)], the Australian government, academia, and the food industry. Results: With the use of the FAOSTAT food balance sheets for Australia, the per capita availability of added or refined sugars and sweeteners was shown to have fallen 16% from 152 g/d in 1980 to 127 g/d in 2011 ( P -trend = 0.001). In national dietary surveys in 1995 and 2011-2012, added-sugars intake declined markedly in adult men (from 72 to 59 g/d; -18%) but not in women (44-42 g/d; NS). As a proportion of total energy, added-sugars intake fell 10% in adult men but nonsignificantly in adult women. Between 1995 and 2011-2012, the proportion of energy from SSBs (including 100% juice) declined 10% in adult men and 20% in women. More marked changes were observed in children aged 2-18 y. Data from national grocery sales indicated that per capita added-sugars intakes derived from carbonated soft drinks fell 26% between 1997 and 2011 (from 23 to 17 g/d) with similar trends for noncarbonated beverages. Conclusions: In Australia, 4 independent data sets confirmed shorter- and longer-term declines in the availability and intake of added sugars, including those contributed by SSBs. The findings challenge the widespread belief that energy from added sugars or sugars in solution are uniquely linked to the prevalence of obesity. © 2017 American Society for Nutrition.

Carbohydrates, Sugar, and Your Child

Science.gov (United States)

... carbs are: simple carbohydrates (or simple sugars): including fructose, glucose, and lactose, which also are found in nutritious ... sugar, check the ingredients list for sugar, corn syrup, or other sweeteners, such as dextrose, fructose, honey, or molasses, to name just a few. ...

Increased release of fermentable sugars from elephant grass by enzymatic hydrolysis in the presence of surfactants

International Nuclear Information System (INIS)

Menegol, Daiane; Scholl, Angélica Luisi; Fontana, Roselei Claudete; Dillon, Aldo José Pinheiro; Camassola, Marli

2014-01-01

Highlights: • Milling is an attractive method to enhance the enzymatic hydrolysis of biomass. • Surfactants improve the efficiency of lignocellulose enzymatic hydrolysis. • Pretreatment with NaOH, smaller particle size and Tween 80® were more efficient. - Abstract: In the search for renewable energy sources, elephant grass is an alternative substrate for ethanol production, but this substrate must be hydrolyzed by cellulases and xylanases to liberate fermentable sugars. During enzymatic hydrolysis, cellulase activity is reduced by the irreversible adsorption of cellulase onto cellulose, decreasing the rate of hydrolysis. Adding surfactants during hydrolysis can improve the process. The effects of Tween® and Triton® surfactants on the enzymatic hydrolysis of elephant grass were evaluated in this context. The data indicate that pretreatment with sodium hydroxide, along with a smaller particle size (0.075–0.152 mm) and the use of Tween 80®, increased the efficiency of releasing reducing sugars from pretreated elephant grass biomass. Thus, it is possible to reduce grinding costs in second-generation ethanol production through the use of surfactants, as they allow efficient hydrolysis of larger biomass particles

75 FR 22095 - USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff...

Science.gov (United States)

2010-04-27

... USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff-Rate... announced a reassignment of surplus sugar under domestic cane sugar allotments of 200,000 short tons raw value (STRV) to imports, and increased the fiscal year (FY) 2010 raw sugar tariff-rate quota (TRQ) by...

75 FR 38764 - USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff...

Science.gov (United States)

2010-07-06

... USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2010 Raw Sugar Tariff-Rate... announced a reassignment of surplus sugar under domestic cane sugar allotments of 300,000 short tons raw value (STRV) to imports, and increased the fiscal year (FY) 2010 raw sugar tariff-rate quota (TRQ) by...

76 FR 20305 - USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2011 Raw Sugar Tariff...

Science.gov (United States)

2011-04-12

... USDA Reassigns Domestic Cane Sugar Allotments and Increases the Fiscal Year 2011 Raw Sugar Tariff-Rate... announced a reassignment of surplus sugar under domestic cane sugar allotments of 325,000 short tons raw value (STRV) to imports, and increased the fiscal year (FY) 2011 raw sugar tariff-rate quota (TRQ) by...

Dynamics of sugar-metabolic enzymes and sugars accumulation during watermelon (citrullus lanatus) fruit development

International Nuclear Information System (INIS)

Zhang, H.

2016-01-01

We analyzed sugar accumulation and the activities of sugar-metabolic enzymes in ripening fruits of three cultivars of watermelon; a high-sugar type w2, a low-sugar type (w1), and their hybrid. In w2, the glucose and fructose contents were higher than the sucrose content in the earlier stage of fruit development, and fruit growth was accompanied by increases in glucose, fructose, and sucrose contents. The sucrose content increased substantially after 20 days after anthesis (DAA) and it was the main soluble sugar in mature fruit (sucrose: hexoses ratio, 0.71). In W, the fructose and glucose contents were significantly higher than the sucrose content in mature fruit (sucrose: hexoses ratio, 0.25). Comparing the two parent cultivars, sucrose was the most important factor affecting the total sugar content in mature fruit, although glucose and fructose also contributed to total sugar contents. The fructose and glucose contents in the fruit of F1 were mid-way between those of their parents, while the sucrose content was closer to that of W (sucrose:hexoses ratio in F1, 0.26). In the early stage of fruit development of W2, the activities of acid invertase and neutral invertase were higher than those of sucrose synthase and sucrose phosphate synthase. After 20 DAA, the acid invertase and neutral invertase activities decreased and those of sucrose synthase and sucrose phosphate synthase increased, leading to increased sucrose content. In W1, the activities of acid invertase and neutral invertase were higher than those of sucrose synthase and sucrose phosphate synthase at the early stage. The sucrose synthase and sucrose phosphate synthase activities were lower in W1 than in W2 at the later stages of fruit development. The patterns of sugar accumulation and sugar-metabolic enzyme activities during fruit development in F1 were similar to those in W1. (author)

Comparative anatomy of the peduncles of Thai Sugar Palms provides insight on putative sugar transport mechanisms

DEFF Research Database (Denmark)

Somjaiai, Pananun; Barfod, Anders; Jampeetong, Arunothai

Inflorescences of sugar palms exude copious amounts of sugar-rich sap, when their peduncles are scarred. In Thailand this phenomenon form the basis of a widespread cottage industry based on species such as Arenga pinnata, Borassus flabellifera, Cocos nucifera and Nypa fruticans. The extracted sugar...... sap is used mainly for jaggery, syrup and different types of beverages. In this study we looked for anatomical correlates of the elevated sap flow in injured peduncles of sugar palms. Despite a limited sample size we observed that sugar producing palms differ from the reference palm Chamaedorea...

Sugar in Infants, Children and Adolescents

DEFF Research Database (Denmark)

Mis, Nataša Fidler; Braegger, Christian; Bronsky, Jiri

2017-01-01

The consumption of sugars, particularly sugar-sweetened beverages (SSBs; beverages or drinks that contain added caloric sweeteners (i.e. sucrose, high-fructose corn syrup, fruit-juice concentrates), in European children and adolescents exceeds current recommendations. This is of concern because...... there is no nutritional requirement for free sugars, and infants have an innate preference for sweet taste, which may be modified and reinforced by pre- and postnatal exposures. Sugar containing beverages/free sugars increase the risk for overweight/obesity and dental caries, can result in poor nutrient supply...... and reduced dietary diversity and may be associated with increased risk of type 2 diabetes mellitus, cardiovascular risk, and other health effects. The term 'free sugars', includes all monosaccharides/disaccharides added to foods/beverages by the manufacturer/cook/consumer, plus sugars naturally present...

Sugar in infants, children and adolescents

DEFF Research Database (Denmark)

Mis, Nataša Fidler; Braegger, Christian; Bronsky, Jiri

2017-01-01

The consumption of sugars, particularly sugar-sweetened beverages (SSBs; beverages or drinks that contain added caloric sweeteners (i.e. sucrose, high-fructose corn syrup, fruit-juice concentrates), in European children and adolescents exceeds current recommendations. This is of concern because...... there is no nutritional requirement for free sugars, and infants have an innate preference for sweet taste, which may be modified and reinforced by pre- and postnatal exposures. Sugar containing beverages/free sugars increase the risk for overweight/obesity and dental caries, can result in poor nutrient supply...... and reduced dietary diversity and may be associated with increased risk of type 2 diabetes mellitus, cardiovascular risk, and other health effects. The term 'free sugars', includes all monosaccharides/disaccharides added to foods/beverages by the manufacturer/cook/consumer, plus sugars naturally present...

Yang-Mills theory in Coulomb gauge; Yang-Mills-theorie in Coulombeichung

Energy Technology Data Exchange (ETDEWEB)

Feuchter, C.

2006-07-01

In this thesis we study the Yang-Mills vacuum structure by using the functional Schroedinger picture in Coulomb gauge. In particular we discuss the scenario of colour confinement, which was originally formulated by Gribov. After a short introduction, we recall some basic aspects of Yang-Mills theories, its canonical quantization in the Weyl gauge and the functional Schroedinger picture. We then consider the minimal Coulomb gauge and the Gribov problem of the gauge theory. The gauge fixing of the Coulomb gauge is done by using the Faddeev-Popov method, which enables the resolution of the Gauss law - the constraint on physical states. In the third chapter, we variationally solve the stationary Yang-Mills Schroedinger equation in Coulomb gauge for the vacuum state. Therefor we use a vacuum wave functional, which is strongly peaked at the Gribov horizon. The vacuum energy functional is calculated and minimized resulting in a set of coupled Schwinger-Dyson equations for the gluon energy, the ghost and Coulomb form factors and the curvature in gauge orbit space. Using the angular approximation these integral equations have been solved analytically in both the infrared and the ultraviolet regime. The asymptotic analytic solutions in the infrared and ultraviolet regime are reasonably well reproduced by the full numerical solutions of the coupled Schwinger-Dyson equations. In the fourth chapter, we investigate the dependence of the Yang-Mills wave functional in Coulomb gauge on the Faddeev-Popov determinant. (orig.)

Acid-producing capacity from sugars and sugar alcohols among Lactobacillus isolates collected in connection with radiation therapy.

Science.gov (United States)

Almståhl, Annica; Rudbäck, Helena; Basic, Amina; Carlén, Anette; Alstad, Torgny

2017-12-01

To investigate the acid-producing capacity from sugars and sugar alcohols of oral Lactobacillus collected in connection with radiation therapy (RT) to the head and neck region. Lactobacillus were collected from the tongue, buccal mucosa and supragingival plaque in 24 patients before, during, and after RT. The acid-producing capacity of Lactobacillus isolates (n=211) was analyzed using a colorimetric fermentation test in microtiter plates. Solutions containing 2% sugars (sucrose, glucose, fructose, lactose) or sugar-alcohols (sorbitol and xylitol) were used. After 24h of incubation, bacterial acid-producing capacity was determined as strong (pH6). Data regarding intake frequency of sugar-rich products and products with sugar-alcohols was collected. The highest acid-producing capacity using the sugars was seen for isolates collected during RT. Sorbitol was fermented to a higher extent during and post RT, especially among isolates from plaque. Lactobacillus fermenting xylitol showed the highest acid-producing capacity during RT (psugar-rich products or sugar-alcohol containing products and Lactobacillus acid-producing capacity, were found. The results suggest that Lactobacillus isolates, collected from the tongue, buccal mucosa and supragingival plaque, have a higher acid-producing capacity using sugars and sugar-alcohols during RT than one year post RT. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Effect of Sugar Price Policy on U.S. Imports of Processed Sugar-containing foods

OpenAIRE

Jabara, Cathy L.

1988-01-01

This paper examines the effects of sugar protection, as well as the effects of these other factors, on U.S. demand for imports of sugar-containing products. The paper also addresses two main issues: (1) whether substitution of alternative sweeteners has allowed U.S. food manufactures to reduce the competitive advantage provided to foreign manufactures by U.S. sugar policies, and (2) which countries -- developed or developing -- have been able to increase their exports of sugar-containing prod...

Sugar-free medicines are counterproductive.

Science.gov (United States)

Sundar, S

2012-09-01

Sugar in food and drinks is responsible for the poor dental health of many children and adults. On the other hand, there is no evidence that the small amount of sugar in medicines has been responsible for any dental problems. A recent British Heart Foundation survey found that nearly one in three UK children are eating sweets, chocolate and crisps three or more times a day. Hence it is futile administering sugar-free medicine to a child consuming lot of sweets. Moreover, sugar in medicines makes them palatable and bitter medicines inevitably affect compliance with the prescribed treatment. Poor compliance leads to inadequate treatment of illness and consequently increases the risk of complications from illness. Hence sugar-free medicines promoted as a public health policy could have actually caused more harm than any meaningful net benefit. There is an urgent need for a healthy debate and a fresh look at the policy of promoting sugar-free medicines.

Uranium mill tailings management practices in Saskatchewan, Canada

International Nuclear Information System (INIS)

Clifton, A.W.; Barsi, R.G.; Melis, L.A.

1984-01-01

Uranium was discovered in Saskatchewan in 1934. The first major mill began operating at Beaverlodge in 1953; two other mills began production in the same area in 1955 and 1957. Waste management measures were limited at the early mills. A new generation of mills was brought into production beginning in 1975 utilizing engineered waste management systems. The paper presents a brief description of the geography and physical environment of northern Saskatchewan, Canada; reviews milling operations and waste managements systems; describes the evolution of waste management systems; and, comments on environmental control measures regulating the industry

Respiration-Dependent Utilization of Sugars in Yeasts: a Determinant Role for Sugar Transporters

OpenAIRE

Goffrini, Paola; Ferrero, Iliana; Donnini, Claudia

2002-01-01

In many yeast species, including Kluyveromyces lactis, growth on certain sugars (such as galactose, raffinose, and maltose) occurs only under respiratory conditions. If respiration is blocked by inhibitors, mutation, or anaerobiosis, growth does not take place. This apparent dependence on respiration for the utilization of certain sugars has often been suspected to be associated with the mechanism of the sugar uptake step. We hypothesized that in many yeast species, the permease activities fo...

The effect of organosolv pretreatment on optimization of hydrolysis process to produce the reducing sugar

Directory of Open Access Journals (Sweden)

Lini Fibrillian Zata

2018-01-01

Full Text Available As the fossil energy decrease such as petroleum and natural gas, that are encourages a lot of research to develop new sources of energy from renewable raw materials. One of the source is through reducing sugar (glucose and xylose obtained from coffee pulp waste; this is due to abundant production of coffee pulp every year reaching 743 kg/ha. In addition, this waste has not been used optimally and the cellulose and hemicellulose content of the coffee is high. The purpose of this study is to get the optimal operating condition for reducing sugar production from coffee pulp waste. The method used for optimization is Response Surface Methodology with Central Composite Design. The optimum operation condition obtained was pH 4.63 at 34ºC for 16.29 hours of hydrolysis. As a result, the predicted yield gained was 0.147 grams of reducing sugars / gram of cellulose+hemicellulose. The result indicates the gained yield was 0.137 grams of reducing sugars / gram of cellulose+hemicellulose.

Sugar and Sugar Derivatives in Residues Produced from the UV Irradiation of Astrophysical Ice Analogs

Science.gov (United States)

Nuevo, M.; Sandford, S. A.; Cooper, G.

2016-01-01

A large variety and number of organic compounds of prebiotic interest are known to be present in carbonaceous chondrites. Among them, one sugar (dihydroxyacetone) as well as several sugar acids, sugar alcohols, and other sugar derivatives have been reported in the Murchison and Murray meteorites. Their presence, along with amino acids, amphiphiles, and nucleobases strongly suggests that molecules essential to life can form abiotically under astrophysical conditions. This hypothesis is supported by laboratory studies on the formation of complex organic molecules from the ultraviolet (UV) irradiation of simulated astrophysical ice mixtures consisting of H2O, CO, CO2, CH3OH, CH4, NH3, etc., at low temperature. In the past 15 years, these studies have shown that the organic residues recovered at room temperature contain amino acids, amphiphiles, nucleobases, as well as other complex organics. However, no systematic search for the presence of sugars and sugar derivatives in laboratory residues have been reported to date, despite the fact that those compounds are of primary prebiotic significance. Indeed, only small (up to 3 carbon atoms) sugar derivatives including glycerol and glyceric acid have been detected in residues so far.

Blue-shift in photoluminescence of ion-milled HgCdTe films and relaxation of defects induced by the milling

International Nuclear Information System (INIS)

Pociask, M.; Izhnin, I.I.; Mynbaev, K.D.; Izhnin, A.I.; Dvoretsky, S.A.; Mikhailov, N.N.; Sidorov, Yu.G.; Varavin, V.S.

2010-01-01

Simultaneous measurements of electrical conductivity, the Hall coefficient, and photoluminescence (PL) spectra of ion-milled Hg 1 - x Cd x Te films (x ∼ 0.30 and 0.38) were performed during post-milling ageing of the films at 293 K. In the course of the PL study, a 'relaxation' of the blue-shift of the PL band of ion-milled Hg 0.70 Cd 0.30 Te was observed. The relaxation was caused by the decrease of the electron concentration due to gradual disintegration of defects induced by the milling. It is shown that while ion milling substantially changes the electrical properties of Hg 1 - x Cd x Te, its PL spectrum in the long-term is affected insignificantly.

KSC ADVANCED GROUND BASED FIELD MILL V1

Data.gov (United States)

National Aeronautics and Space Administration — The Advanced Ground Based Field Mill (AGBFM) network consists of 34 (31 operational) field mills located at Kennedy Space Center (KSC), Florida. The field mills...

Loop quantum corrected Einstein Yang-Mills black holes

Science.gov (United States)

Protter, Mason; DeBenedictis, Andrew

2018-05-01

In this paper, we study the homogeneous interiors of black holes possessing SU(2) Yang-Mills fields subject to corrections inspired by loop quantum gravity. The systems studied possess both magnetic and induced electric Yang-Mills fields. We consider the system of equations both with and without Wilson loop corrections to the Yang-Mills potential. The structure of the Yang-Mills Hamiltonian, along with the restriction to homogeneity, allows for an anomaly-free effective quantization. In particular, we study the bounce which replaces the classical singularity and the behavior of the Yang-Mills fields in the quantum corrected interior, which possesses topology R ×S2 . Beyond the bounce, the magnitude of the Yang-Mills electric field asymptotically grows monotonically. This results in an ever-expanding R sector even though the two-sphere volume is asymptotically constant. The results are similar with and without Wilson loop corrections on the Yang-Mills potential.

A free sugars daily value (DV) identifies more "less healthy" prepackaged foods and beverages than a total sugars DV.

Science.gov (United States)

Bernstein, Jodi T; Labonté, Marie-Ève; Franco-Arellano, Beatriz; Schermel, Alyssa; L'Abbé, Mary R

2018-04-01

Regulatory changes in Canada will require food labels to have a benchmark [% Daily Value, %DV] for total sugars, based on 100 g/day, while US labels will require a %DV for added sugars, based on 50 g/day. The objective of this study was to compare two labelling policies, a total sugars DV (100 g/day) and a free sugars DV (50 g/day) on food labels. This cross-sectional analysis of the Food Label Information Program database focussed on top sources of total sugars intake in Canada (n = 6924 foods). Products were categorized as "less healthy" using two sets of criteria: a) free sugars levels exceeding the WHO guidelines (≥10% energy from free sugars); and b) exceeding healthfulness cut-offs of the Food Standards Australia New Zealand Nutrient Profiling Scoring Criterion (FSANZ-NPSC). The proportion of "less healthy" products with ≥15%DV (defined as "a lot" of sugars i.e. high in sugars, based on Health Canada's %DV labelling footnote and educational message for dietary guidance) were compared for each sugar labelling scenario. The free sugars DV showed better alignment with both methods for assessing "healthfulness" than the total sugars DV. The free sugars DV identified a greater proportion of "less healthy" foods with ≥15%DV, based on both the FSANZ-NPSC (70% vs. 45%, p chocolate bars, confectionery, and frozen desserts categories. Compared to total sugars DV labelling, using a free sugars DV identified more "less healthy" foods. Findings support the adoption of free sugars labelling. Copyright © 2018 Elsevier Inc. All rights reserved.

Aromatics extraction from pyrolytic sugars using ionic liquid to enhance sugar fermentability

NARCIS (Netherlands)

Li, X.; Luque-Moreno, L.C.; Oudenhoven, Stijn; Rehmann, L.; Kersten, Sascha R.A.; Schuur, Boelo

2016-01-01

Fermentative bioethanol production from pyrolytic sugars was improved via aromatics removal by liquid–liquid extraction. As solvents, the ionic liquid (IL) trihexyltetradecylphosphonium dicyanamide (P666,14[N(CN)2]) and ethyl acetate (EA) were compared. Two pyrolytic sugar solutions were created

Microbiological Spoilage of High-Sugar Products

Science.gov (United States)

Thompson, Sterling

The high-sugar products discussed in this chapter are referred to as chocolate, sugar confectionery (non-chocolate), liquid sugars, sugar syrups, and honey. Products grouped in the sugar confectionery category include hard candy, soft/gummy candy, caramel, toffee, licorice, marzipan, creams, jellies, and nougats. A common intrinsic parameter associated with high-sugar products is their low water activity (a w), which is known to inhibit the growth of most spoilage and pathogenic bacteria. However, spoilage can occur as a result of the growth of osmophilic yeasts and xerophilic molds (Von Richter, 1912; Anand & Brown, 1968; Brown, 1976). The a w range for high-sugar products is between 0.20 and 0.80 (Banwart, 1979; Richardson, 1987; Lenovich & Konkel, 1992; ICMSF, 1998; Jay, Loessner, & Golden, 2005). Spoilage of products, such as chocolate-covered cherries, results from the presence of yeasts in the liquid sugar brine or the cherry. Generally, the spoiled product will develop leakers. The chocolate covering the cherry would not likely be a source of yeast contamination.

Stepwise Functional Evolution in a Fungal Sugar Transporter Family.

Science.gov (United States)

Gonçalves, Carla; Coelho, Marco A; Salema-Oom, Madalena; Gonçalves, Paula

2016-02-01

Sugar transport is of the utmost importance for most cells and is central to a wide range of applied fields. However, despite the straightforward in silico assignment of many novel transporters, including sugar porters, to existing families, their exact biological role and evolutionary trajectory often remain unclear, mainly because biochemical characterization of membrane proteins is inherently challenging, but also owing to their uncommonly turbulent evolutionary histories. In addition, many important shifts in membrane carrier function are apparently ancient, which further limits our ability to reconstruct evolutionary trajectories in a reliable manner. Here, we circumvented some of these obstacles by examining the relatively recent emergence of a unique family of fungal sugar facilitators, related to drug antiporters. The former transporters, named Ffz, were previously shown to be required for fructophilic metabolism in yeasts. We first exploited the wealth of fungal genomic data available to define a comprehensive but well-delimited family of Ffz-like transporters, showing that they are only present in Dikarya. Subsequently, a combination of phylogenetic analyses and in vivo functional characterization was used to retrace important changes in function, while highlighting the evolutionary events that are most likely to have determined extant distribution of the gene, such as horizontal gene transfers (HGTs). One such HGT event is proposed to have set the stage for the onset of fructophilic metabolism in yeasts, a trait that according to our results may be the metabolic hallmark of close to 100 yeast species that thrive in sugar rich environments. © The Author 2015. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

I Mend It With Sugar

OpenAIRE

Lindvall, Charlotta

2015-01-01

I mend it with sugar         Abstract   "Gluttony" and "sloth" is the sugar addictions best friend, or could it be that the addiction comes out of a disturbed hormone production caused by the environment that surrounds us? Trying to understand my own sugar addiction I weave in my personal story into my artistic research around this subject. The sugar might be the cause of the pandemic obesity and that's why it has to bee brought up into the light from its darkness down the basement of the fo...

Influence of fine grinding on the hydrolysis of cellulosic materials - acid vs enzymic

Energy Technology Data Exchange (ETDEWEB)

Millet, M A; Effland, M J; Caulfield, D F

1979-01-01

The effect of vibratory milling on the enzymic and dilute H/sub 2/SO/sub 4/ hydrolysis of cotton linters, newsprint, Douglas fir, and red oak was investigated by determining the rate and degree of hydrolysis, maximum yield of reducing sugars, and cellulose crystallinity index. Linters were totally hydrolyzed in 10 days after 60 min milling; oak carbohydrates were 93% convertible to sugar in the same period after 240 min milling. Vibratory milling substantially increased the rates of acid hydrolysis of all 4 substrates, nearly 9- and 5-fold for linters and other lignocellulosic materials, respectively. Increases in maximum sugar yields under batch conditions were 60 to 140% higher than those for unmilled materials.

75 FR 23631 - Sugar Re-Export Program, the Sugar-Containing Products Re-Export Program, and the Polyhydric...

Science.gov (United States)

2010-05-04

... Part 1530 Sugar Re-Export Program, the Sugar-Containing Products Re-Export Program, and the Polyhydric...), Additional U.S. Note 6, which authorizes entry of raw cane sugar under subheading 1701.11.20 of the HTS for the production of polyhydric alcohols, except polyhydric alcohols for use as a substitute for sugar in...

Low blood sugar - newborns

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/007306.htm Low blood sugar - newborns To use the sharing features on this page, please enable JavaScript. A low blood sugar level in newborn babies is also ...

Sugar Price Supports and Taxation

Science.gov (United States)

Dilk, Abby; Savaiano, Dennis A.

2017-01-01

Domestic US sugar production has been protected by government policy for the past 82 years, resulting in elevated domestic prices and an estimated annual (2013) $1.4 billion dollar “tax” on consumers. These elevated prices and the simultaneous federal support for domestic corn production have ensured a strong market for high-fructose corn syrup. Americans have dramatically increased their consumption of caloric sweeteners during the same period. Consumption of “empty” calories (ie, foods with low-nutrient/high-caloric density)—sugar and high-fructose corn syrup being the primary sources—is considered by most public health experts to be a key contributing factor to the rise in obesity. There have been substantial efforts to tax sugar-sweetened beverages (SSBs) to both reduce consumption and provide a source of funds for nutrition education, thereby emulating the tobacco tax model. Volume-based SSB taxes levy the tax rate per ounce of liquid, where some are only imposed on beverages with added sugar content exceeding a set threshold. Nonetheless, volume-based taxes have significant limitations in encouraging consumers to reduce their caloric intake due to a lack of transparency at the point of purchase. Thus, it is hypothesized that point-of-purchase, nutrient-specific excise taxes on SSBs would be more effective at reducing sugar consumption. However, all SSB taxes are limited by the possibility that consumers may compensate their decreased intake from SSBs with other high-calorie junk foods. Furthermore, there are no existing studies to provide evidence on how SSB taxes will impact obesity rates in the long term. The paradox of sugar prices is that Americans have paid higher prices for sugar to protect domestic production for more than 80 years, and now, Americans are being asked to pay even more to promote public health. The effective use of sugar taxes should be considered based on their merits in reducing sugar consumption and making available a new

Decolorization of turbid sugar juice from sugar factory using waste powdered carbon

Science.gov (United States)

Aljohani, Hind; Ahmed, Youssef; El-Shafey, Ola; El-Shafey, Shaymaa; Fouad, Rasha; Shoueir, Kamel

2018-03-01

Waste management of powdered activated carbon from cyclone of some sugar factories was used for decolorization of sugar mud juice (SMJ) in this study. The presence of powdered activated carbon waste (PACW) was admitted again for their use in SMJ decolorization. The determined specific surface area are typically S BET = 613.887 m2/g and the pore distribution lies in mesoporous domain. Color removal (CR%) and decolorization capacity (DC) of the characterized PACW are similar to those of decolorants used at this time for sugar refining. The CR% with PACW reached 81.03% at pH7.0 and dosed in the amount 0.5 g/50 ml of SMJ. There are two acceptable mechanisms illustrates the attachments between phenols and carboxylate ions. In this paper, we put a simple and rapid dark liquid decolorization by controlling rejected carbon waste, which will be useful for treatment of dark liquid sugar.

Sugar, acid and furfural quantification in a sulphite pulp mill: Feedstock, product and hydrolysate analysis by HPLC/RID

Directory of Open Access Journals (Sweden)

Tamara Llano

2017-09-01

The analysis of major and minor monosaccharides, aliphatic carboxylic acids and furfurals has been optimised. An important drawback of the spent liquors generated after sulphite pulping is their acidic nature, high viscosity and adhesive properties that interfere in the column lifetime. This work recommends both a CHO-782Pb column for the sugar analysis and an SH-1011 resin-based cross-linked gel column to separate low-molecular-weight chain acids, alcohols and furfurals. Such columns resulted in a good separation with long lifetime, wide pH operating range and low fouling issues.

Factors associated with the acceptance of sugar and sugar substitutes by the public.

Science.gov (United States)

Mackay, D A

1985-09-01

Acceptance is described in both market and sensory research terminology and recent developments in the fields of applied psychology and physiology are examined for their pertinence to public acceptance of sucrose and its substitutes. Information on the function of sucrose in foods other than beverages is presented with emphasis on salivation as an acceptance factor and attention is drawn to its possible dental significance. Distinctions are made between the sweetening and bulking properties of sucrose and sugar substitutes. Factors having a bearing on the acceptance of sweet foods and the determination of their optimal sugar content are described in detail. While major decreases in sucrose intake in the US resulted from high-fructose corn-sweetener usage in soft drinks, no evidence is yet available to suggest that the use of sugar substitutes of the intense artificial sweetener type has caused any decrease in ordinary sugar consumption. Neither is the consumption of polyols (sorbitol, mannitol, xylitol) high enough in confectionery categories to cause any discernible decrease in sugar usage. The evidence suggests not so much that sugar substitutes may have stopped the growth in sucrose usage, but that new product categories such as diet foods and "sugarless' confections may have been created. These categories were never available to fermentable carbohydrate sweeteners and equivalence in acceptance to sucrose-sweetened products was not an important factor in their growth.(ABSTRACT TRUNCATED AT 250 WORDS)

PROCESS OF OBTAINING OF SUGAR FROM SUGAR BEET AND INFLUENCE ON ITS QUALITY

Directory of Open Access Journals (Sweden)

Marián Tokár

2011-02-01

Full Text Available Cooking of massecuites has been study in the connection with different particle size distribution of white sugar. During the crystallization is possible to operate with parameters which have influence on particle size of white sugar. Dry matter of juice in crystallizer, volume of the standard syrup in crystallizer and heating curve of crystallization process are constant parameters in this process. Quantity of slurry (seed magma crystallizate and volume of slurry massecuite are parameters which can be changed for control the particle size distribution of white sugar. Five variants of viable parameters have been trying for obtain ideal particle size distribution of white sugar. As a best has been evaluated variant with 1100 cm3 of slurry and 20 % of volume of slurry massecuite in crystallizer. This variant has had the crystals proportions captured by the sieves between 1.00 and 0.40 mm with minimal differences in weight. More results have been related to reduction of losses of sugar in molasses with the right setting for the line of cooling crystallization process. The looses of sugar can be reduced by adding two coolers in the end of cooling crystalization process what will decrease a temperature to 40 ° C. This temperature will lead to more efficient crystallization in the cooling crystallization process.doi:10.5219/122

ROMI 4.0: Updated Rough Mill Simulator

Science.gov (United States)

Timo Grueneberg; R. Edward Thomas; Urs Buehlmann

2012-01-01

In the secondary hardwood industry, rough mills convert hardwood lumber into dimension parts for furniture, cabinets, and other wood products. ROMI 4.0, the US Department of Agriculture Forest Service's ROugh-MIll simulator, is a software package designed to simulate the cut-up of hardwood lumber in rough mills in such a way that a maximum possible component yield...

Optimisation of milling parameters using neural network

Directory of Open Access Journals (Sweden)

Lipski Jerzy

2017-01-01

Full Text Available The purpose of this study was to design and test an intelligent computer software developed with the purpose of increasing average productivity of milling not compromising the design features of the final product. The developed system generates optimal milling parameters based on the extent of tool wear. The introduced optimisation algorithm employs a multilayer model of a milling process developed in the artificial neural network. The input parameters for model training are the following: cutting speed vc, feed per tooth fz and the degree of tool wear measured by means of localised flank wear (VB3. The output parameter is the surface roughness of a machined surface Ra. Since the model in the neural network exhibits good approximation of functional relationships, it was applied to determine optimal milling parameters in changeable tool wear conditions (VB3 and stabilisation of surface roughness parameter Ra. Our solution enables constant control over surface roughness parameters and productivity of milling process after each assessment of tool condition. The recommended parameters, i.e. those which applied in milling ensure desired surface roughness and maximal productivity, are selected from all the parameters generated by the model. The developed software may constitute an expert system supporting a milling machine operator. In addition, the application may be installed on a mobile device (smartphone, connected to a tool wear diagnostics instrument and the machine tool controller in order to supply updated optimal parameters of milling. The presented solution facilitates tool life optimisation and decreasing tool change costs, particularly during prolonged operation.

Added sugars in kids' meals from chain restaurants.

Science.gov (United States)

Scourboutakos, Mary J; Semnani-Azad, Zhila; L'Abbé, Mary R

2016-06-01

To analyze the added sugars in kids' meals from Canadian chain restaurants in relation to the World Health Organization's proposed sugar recommendation (less than 5% of total daily calories should come from added sugars) and current recommendation (less than 10% of total daily calories should come from added sugars). Total sugar levels were retrieved from the websites of 10 fast-food and 7 sit-down restaurants in 2010. The added sugar levels in 3178 kids' meals from Canadian chain restaurants were calculated in 2014 (in Toronto, Canada) by subtracting all naturally occurring sugars from the total sugar level. The average amount of added sugars in restaurant kids' meals (25 ± 0.36 g) exceeded the WHO's proposed daily recommendation for sugar intake. There was a wide range of added sugar levels in kids' meals ranging from 0 g to 114 g. 50% of meals exceeded the WHO's proposed daily sugar recommendation, and 19% exceeded the WHO's current daily sugar recommendation. There is a wide range of sugar levels in kids' meals from restaurants, and many contain more than a day's worth of sugar.

Properties and sinterability of wet and dry attrition-milled OREOXed powder

International Nuclear Information System (INIS)

Lee, J. W.; Kim, J. H.; Kim, W. K.; Park, K. I.; Lee, J. W.

2001-01-01

The powder properties and sinterability were investigated with the powder prepared by wet and dry attrition milling of OREOX-treated powder. The OREOX-treated powder was prepared from the simulated spent fuel. Powder having less than 1 μm of average particle size could be obtained by dry milling, but not be obtained by wet milling. Thus, specific surface area of dry milled powder was higher than that of wet milled powder. With increasing of milling time, dry milled powder formed dense agglomerate while wet milled powder showed loose agglomerate. The pellets with higher than 95% T.D. of sintered density and larger than 7 μm of grain size were made with the milled powder regardless of milling method. The milling time in wet milling has greatly improved the sinterability. The pellets produced with dry milled powder have higher sintered density and larger grain size

Sugar addiction: the state of the science.

Science.gov (United States)

Westwater, Margaret L; Fletcher, Paul C; Ziauddeen, Hisham

2016-11-01

As obesity rates continue to climb, the notion that overconsumption reflects an underlying 'food addiction' (FA) has become increasingly influential. An increasingly popular theory is that sugar acts as an addictive agent, eliciting neurobiological changes similar to those seen in drug addiction. In this paper, we review the evidence in support of sugar addiction. We reviewed the literature on food and sugar addiction and considered the evidence suggesting the addictiveness of highly processed foods, particularly those with high sugar content. We then examined the addictive potential of sugar by contrasting evidence from the animal and human neuroscience literature on drug and sugar addiction. We find little evidence to support sugar addiction in humans, and findings from the animal literature suggest that addiction-like behaviours, such as bingeing, occur only in the context of intermittent access to sugar. These behaviours likely arise from intermittent access to sweet tasting or highly palatable foods, not the neurochemical effects of sugar. Given the lack of evidence supporting it, we argue against a premature incorporation of sugar addiction into the scientific literature and public policy recommendations.

A Loose Relationship: Incomplete H+/Sugar Coupling in the MFS Sugar Transporter GlcP.

Science.gov (United States)

Bazzone, Andre; Zabadne, Annas J; Salisowski, Anastasia; Madej, M Gregor; Fendler, Klaus

2017-12-19

The glucose transporter from Staphylococcus epidermidis, GlcP Se , is a homolog of the human GLUT sugar transporters of the major facilitator superfamily. Together with the xylose transporter from Escherichia coli, XylE Ec , the other prominent prokaryotic GLUT homolog, GlcP Se , is equipped with a conserved proton-binding site arguing for an electrogenic transport mode. However, the electrophysiological analysis of GlcP Se presented here reveals important differences between the two GLUT homologs. GlcP Se , unlike XylE Ec , does not perform steady-state electrogenic transport at symmetrical pH conditions. Furthermore, when a pH gradient is applied, partially uncoupled transport modes can be generated. In contrast to other bacterial sugar transporters analyzed so far, in GlcP Se sugar binding, translocation and release are also accomplished by the deprotonated transporter. Based on these experimental results, we conclude that coupling of sugar and H + transport is incomplete in GlcP Se . To verify the viability of the observed partially coupled GlcP Se transport modes, we propose a universal eight-state kinetic model in which any degree of coupling is realized and H + /sugar symport represents only a specific instance. Furthermore, using sequence comparison with strictly coupled XylE Ec and similar sugar transporters, we identify an additional charged residue that may be essential for effective H + /sugar symport. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

Pavement maintenance procedures with and without milling materials

Directory of Open Access Journals (Sweden)

Rafiqul A. Tarefder

2016-01-01

Full Text Available This study evaluates maintenance treatment followed by different Districts of New Mexico Department of Transportation (NMDOT. In addition, two case studies on the use of old pavement materials, called the “millings”, in maintenance projects are reported. Based on this study, it is observed that none of the Districts have a written procedure for maintenance work. Rather Districts rely on the experience of the maintenance crew for conducting maintenance projects. All Districts prefer to use chip seal for maintenance irrespective of distress conditions of the pavements. Patching and crack sealing are usually done before chip sealing to extend the life of the chip seals. Sand seal, scrub seal, and slurry seal projects are not done by District maintenance crews but by outside contractors. It is also observed that all Districts are interested in using millings in maintenance projects and most have already used millings in at least one maintenance project with some success and failure. Most of the Districts have used coarse fraction of millings in chip seal projects successfully. However, they failed to find a proper way to process the fine fractions of millings. Case Study I shows that fine millings can be used to construct thin overlay when mixed with emulsion in pug mill or hot drums. Case Study II concludes that fine millings can be used as fine/sand seal successfully following the same procedure and using the same equipment as chip seal. Keywords: Millings, Maintenance, Emulsion, Rutting, Pug-mill

Jaduguda uranium mill : rich experiences for future challenges

International Nuclear Information System (INIS)

Beri, K.K.

1991-01-01

India's only uranium milling plant at Jaduguda was commissioned in 1967-68 utilising low grade uranium ore. The flowsheet of the mill and controlling parameters were based on studies done on laboratory and pilot plant scale tests at the Bhabha Atomic Research Centre, Bombay. The mill has worked upto expectation except in few areas where modifications had to be done for smooth production. Apart from this improvements in operating practices have been done based on experience gained in operating the mill, incorporating the recent technological advances. In the recent past, the mill was expanded to increase the installed capacity by 40% and was commissioned in October 1987. The expanded mill has given the desired capacity and is working smoothly. The present paper deals with the experience gained in running the plant for the last 20 years and changes incorporated (author). 4 figs

Sugar palm (Argena pinnata). Potential of sugar palm for bio-ethanol production

NARCIS (Netherlands)

Elbersen, H.W.; Oyen, L.P.A.

2010-01-01

The energetic and economic feasibility of bioethanol production from sugar palm is virtually unknown. A positive factor are the potentially very high yields while the long non-productive juvenile phase and the high labor needs can be seen as problematic. Expansion to large scale sugar palm

Indian Americans at Mille Lacs.

Science.gov (United States)

Holbert, Victoria L.; And Others

The Training Center for Community Programs prepared a report on the Mille Lacs (Chippewa) Reservation in Minnesota. Data for the report were from 2 separate sources: a survey conducted by the Training Center with the assistance of the Mille Lacs community action program (1967) and an attitudinal survey conducted by Victoria Holbert during 1969.…

Ground beetle populations near a kraft mill

Energy Technology Data Exchange (ETDEWEB)

Freitag, R.; Hastings, L.; Mercer, W.R.; Smith, A.

1973-02-01

Twenty species of ground beetles (Family Carabidae) and one species of carrion beetle (Family Silphidae) were collected in six stations east of a kraft paper mill in Thunder Bay, Ontario, from May to August, 1971. The beetle population decreased markedly towards the mill. There was no apparent statistical difference in size variation of specimens near the mill and those further away.

21 CFR 515.10 - Medicated feed mill license applications.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Medicated feed mill license applications. 515.10... (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS MEDICATED FEED MILL LICENSE Applications § 515.10 Medicated feed mill license applications. (a) Medicated feed mill license applications (Forms FDA 3448) may...

High-energy ball milling of powder B-C mixtures

International Nuclear Information System (INIS)

Ramos, Alfeu S.; Taguchi, Simone P.; Ramos, Erika C.T.; Arantes, Vera L.; Ribeiro, Sebastiao

2006-01-01

The present work reports on the preparation of B-10 at.% C and B-18 at.% C powders by high-energy ball milling and further heat treatment. The milling process was carried out in a planetary ball mill. Following the milling process, powder samples were heat-treated at 1200 deg. C for 4 h using inert atmosphere. The milled and heat-treated B-10C and B-18C powders were characterized by means of X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. A reduction on the intensity of B and C peaks was noticed after milling for 2 h, probably due the fine powder particle sizes because the pronounced fracture mechanism during ball milling of brittle starting components. The XRD patterns of B-10C and B-18C powders milled for 6 h indicated the presence of other peaks, suggesting that a metastable structure could have been formed. After milling for 90 h, these unknown peaks were still present. A large amount of B 4 C was formed after heat treatment at 1200 deg. C for 4 h beside these unknown peaks

The yang mills gravity dual

International Nuclear Information System (INIS)

Crooks, David E.; Evans, Nick

2003-01-01

We describe a ten dimensional supergravity geometry which is dual to a gauge theory that is non-supersymmetric Yang Mills in the infra-red but reverts to N=4 super Yang Mills in the ultra-violet. A brane probe of the geometry shows that the scalar potential of the gauge theory is stable. We discuss the infra-red behaviour of the solution. The geometry describes a Schroedinger equation potential that determines the glueball spectrum of the theory; there is a mass gap and a discrete spectrum. The glueball mass predictions match previous AdS/CFT Correspondence computations in the non-supersymmetric Yang Mills theory, and lattice data, at the 10% level. (author)

A rapid method for simultaneous quantification of 13 sugars and sugar alcohols in food products by UPLC-ELSD.

Science.gov (United States)

Koh, Dong-Wan; Park, Jae-Woong; Lim, Jung-Hoon; Yea, Myeong-Jai; Bang, Dae-Young

2018-02-01

A novel, rapid, simultaneous analysis method for five sugars (fructose, glucose, sucrose, maltose, and lactose) and eight sugar alcohols (erythritol, xylitol, sorbitol, mannitol, inositol, maltitol, lactitol, and isomalt) was developed using UPLC-ELSD, without derivatization. The analysis conditions, including the gradient conditions, modifier concentration and column length, were optimized. Thirteen sugars and sugar alcohols were separated well and the resolution of their peaks was above 1.0. Their optimum analysis condition can be analyzed within 15min. Standard curves for sugars and sugar alcohols with concentrations of 5.0-0.1% and 2.0-0.05% are presented herein, and their correlation coefficients are found to be above 0.999 and the limit of detection (LOD) was around 0.006-0.018%. This novel analysis system can be used for foodstuffs such as candy, chewing gum, jelly, chocolate, processed chocolate products, and snacks containing 0.21-46.41% of sugars and sugar alcohols. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biogas from sugar beet press pulp as substitute of fossil fuel in sugar beet factories.

Science.gov (United States)

Brooks, L; Parravicini, V; Svardal, K; Kroiss, H; Prendl, L

2008-01-01

Sugar beet press pulp (SBP) accumulates as a by-product in sugar factories and it is generally silaged or dried to be used as animal food. Rising energy prices and the opening of the European Union sugar market has put pressure on the manufacturers to find alternatives for energy supply. The aim of this project was to develop a technology in the treatment of SBP that would lead to savings in energy consumption and would provide a more competitive sugar production from sugar beets. These goals were met by the anaerobic digestion of SBP for biogas production. Lab-scale experiments confirmed the suitability of SBP as substrate for anaerobic bacteria. Pilot-scale experiments focused on process optimization and procedures for a quick start up and operational control. Both single-stage and two-stage process configurations showed similar removal efficiency. A stable biogas production could be achieved in single-stage at a maximum volumetric loading rate of 10 kgCSB/(m(3) x d). Degradation efficiency was 75% for VS and 72% for COD. Average specific gas production reached 530 NL/kgCOD(SBP) or 610 NL/kgVS(SBP). (CH(4): 50 to 53%). The first large-scale biogas plant was put into operation during the sugar processing period 2007 at a Hungarian sugar factory. Digesting approximately 50% of the SBP (800 t/d, 22%TS), the biogas produced could substitute about 40% of the natural gas required for the thermal energy supply within the sugar processing. Copyright IWA Publishing 2008.

IMPROVED BIOREFINERY FOR THE PRODUCTION OF ETHANOL, CHEMICALS, ANIMAL FEED AND BIOMATERIALS FROM SUGAR CANE

Energy Technology Data Exchange (ETDEWEB)

Dr. Donal F. Day

2009-01-29

/fermentation process yielded improvements beyond what was expected solely from the addition of sugar. In order to expand the economic potential for building a biorefinery, the conversion of enzyme hydrolysates of AFEX-treated bagasse to succinic acid was also investigated. This program established a solid basis for pre-treatment of bagasse in a manner that is feasible for producing ethanol at raw sugar mills.

Reactive-inspired ball-milling synthesis of an ODS steel: study of the influence of ball-milling and annealing

International Nuclear Information System (INIS)

Brocq, M.

2010-10-01

In the context of the development of new ODS (Oxide Dispersion Strengthened) steels as core materials in future nuclear reactors, we investigated a new process inspired by reactive ball-milling which consists in using YFe 3 andFe 2 O 3 as starting reactants instead of Y 2 O 3 to produce a dispersion of nano-oxides in a steel matrix and the influence of synthesis conditions on the nano-oxide characteristics were studied. For that aim, ODS steels were prepared by ball-milling and then annealed. Multi-scale characterizations were performed after each synthesis step, using notably atom probe tomography and small angle neutron scattering. The process inspired by reactive ball-milling was shown to be efficient for ODS steel synthesis, but it does not modify the nano-oxide characteristics as compared to those of oxides directly incorporated in the matrix by ball-milling. Broadly speaking, the nature of the starting oxygen bearing reactants has no influence on nano-oxide formation. Moreover, we showed that the nucleation of nano-oxides nucleation can start during milling and continues during annealing with a very fast kinetic. The final characteristics of nano-oxides formed in this way can be monitored through ball-milling parameters (intensity, temperature and atmosphere) and annealing parameters (duration and temperature). (author)

The Effect of Sugarcane Bagassès Size on the Properties of Pretreatment and Enzymatic Hydrolysis

Science.gov (United States)

Xu, Jun; Zhou, Guoqiang; Li, Jun

2017-06-01

The influence of milled bagasse particle size on their reducing sugar and lignin content during dilute acid hydrolysis followed by enzymolysis was investigated. The biomass crystal structures of hydrolyzed residues and enzymolyzed substrates were studied with X-ray diffractometry (XRD). The results showed that the conversion ratio of reducing sugar declined with decreasing milled bagasse particle size. The conversion ratio of reducing sugar after acid hydrolysis decreased from 31.3% to 28.9%. The smaller of the milled bagasse particle size was, the higher of the klason lignin content of hydrolyzed residuals was, which resulted in a decline in conversion ratio of reducing sugar during enzymolysis. In this study, the optimal size of milled bagasse particles was 10 to 20 meshes. The total reducing sugar conversion ratio was 61.5%, consisting of 31.3% in hydrolysis and 30.2% in enzymolysis. After hydrolysis, the specific surface area and pore size increased, and the fiber length was shortened. The inner microfiber bundles were exposed, which improved the accessibility of cellulase and the efficiency of enzymolysis.

Acceptance of sugar reduction in flavored yogurt.

Science.gov (United States)

Chollet, M; Gille, D; Schmid, A; Walther, B; Piccinali, P

2013-09-01

To investigate what level of sugar reduction is accepted in flavored yogurt, we conducted a hedonic test focusing on the degree of liking of the products and on optimal sweetness and aroma levels. For both flavorings (strawberry and coffee), consumers preferred yogurt containing 10% added sugar. However, yogurt containing 7% added sugar was also acceptable. On the just-about-right scale, yogurt containing 10% sugar was more often described as too sweet compared with yogurt containing 7% sugar. On the other hand, the sweetness and aroma intensity for yogurt containing 5% sugar was judged as too low. A second test was conducted to determine the effect of flavoring concentration on the acceptance of yogurt containing 7% sugar. Yogurts containing the highest concentrations of flavoring (11% strawberry, 0.75% coffee) were less appreciated. Additionally, the largest percentage of consumers perceived these yogurts as "not sweet enough." These results indicate that consumers would accept flavored yogurts with 7% added sugar instead of 10%, but 5% sugar would be too low. Additionally, an increase in flavor concentration is undesirable for yogurt containing 7% added sugar. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Uranium mill tailings remedial action technology

International Nuclear Information System (INIS)

Hartley, J.N.; Gee, G.W.

1984-01-01

The uranium milling process involves the hydrometallurgical extraction of uranium from ores and the resultant generation of large quantities of waste referred to as tailings. Uranium mill tailings have been identified as requiring remediation because they contain residual radioactive material that is not removed in the milling process. Potential radiation exposure can result from direct contact with the tailings, from radon gas emitted by the tailings, and from radioactive contamination of groundwater. As a result, the technology developed under the US Department of Energy (DOE) Uranium Mill Tailings Remedial Action Project (UMTRAP) and the US Nuclear Regulatory Commission (NRC) Uranium Recovery Program have focused on radon control, groundwater contamination and the long-term protection of the containment system. This paper briefly summarizes the UMTRAP and NRC remedial action technology development. 33 references, 9 figures, 5 tables

Uranium mill tailings

International Nuclear Information System (INIS)

McLaren, L.H.

1982-11-01

This bibliography contains information on uranium mill tailings included in the Department of Energy's Energy Data Base from January 1981 through October 1982. The abstracts are grouped by subject category as shown in the table of contents. Entries in the subject index also facilitate access by subject, e.g., Mill Tailings/Radiation Hazards. Within each category the arrangement is by report number for reports, followed by nonreports in reverse chronological order. These citations are to research reports, journal articles, books, patents, theses, and conference papers from worldwide sources. Five indexes, each preceded by a brief description, are provided: Corporate Author, Personal Author, Subject, Contract Number, and Report Number. (335 abstracts)

Conversion of yellow crude sugar into alcohol. Conversion of yellow crude sugar in a mixture with sugar beet molasses

Energy Technology Data Exchange (ETDEWEB)

Krishtul, F B; Malchenko, A L; Poluyanova, M T; Gromovich, V F; Maskimova, E A; Golodovskaya, A I; Pal' gova, L S

1963-01-01

Crude sugar (96.5 to 98.4% sucrose) in a mixture with molasses can be converted into alcohol by either batchwise or continuous fermentation processes with good process characteristics. Best yields are obtained when the amount of crude sugar is not more than 50% of the total weight of fermenting material. The bakers' yeast and alcohol produced are of good quality.

Improvement of the supply chain for the sugar cane exportation process employing discrete events simulation techniques - doi: 10.4025/actascitechnol.v35i4.17468

Directory of Open Access Journals (Sweden)

Maria Alejandra Guerrero Hernandez

2013-10-01

Full Text Available Current paper proposes a reduction on all logistic costs involved in the sugar cane exportation process for an important medium-size cargo harbor in South America. The strategy consisted in studying and improving the efficiency of the logistics transportation flow of merchandise between the sugar cane mills and the cargo ports by employing discrete events simulation as a methodology and the ProModel software as a simulation platform. The simulated scenarios show 89% reductions in additional costs for inventory management; 50% of the resources used for loading the containers; and an 11.4% increment in the efficiency of operations. In addition, the new planning strategy was also evaluated with either a positive or negative variation of the demand. It should be underscored that the improved scenarios (out of those simulated do not involve investments in facilities or in machinery purchasing.  

Geometrical characterization of micro end milling tools

DEFF Research Database (Denmark)

Borsetto, Francesca; Bariani, Paolo; Bissacco, Giuliano

2005-01-01

Performance of the milling process is directly affected by the accuracy of tool geometry. Development of methods suitable for dimensional characterization of such tools, with low measurement uncertainties is therefore of relevance. The present article focuses on the geometrical characterization...... of a flat micro end milling tool with a nominal mill diameter of 200 microns. An experimental investigation was carried out involving two different non-contact systems...

When Blood Sugar Is Too Low

Science.gov (United States)

... Videos for Educators Search English Español When Blood Sugar Is Too Low KidsHealth / For Kids / When Blood ... get too low. The Causes of Low Blood Sugar Low blood sugar levels can happen to kids ...

An extended topological Yang-Mills theory

International Nuclear Information System (INIS)

Deguchi, Shinichi

1992-01-01

Introducing infinite number of fields, we construct an extended version of the topological Yang-Mills theory. The properties of the extended topological Yang-Mills theory (ETYMT) are discussed from standpoint of the covariant canonical quantization. It is shown that the ETYMT becomes a cohomological topological field theory or a theory equivalent to a quantum Yang-Mills theory with anti-self-dual constraint according to subsidiary conditions imposed on state-vector space. On the basis of the ETYMT, we may understand a transition from an unbroken phase to a physical phase (broken phase). (author)

Environmental design of a uranium mill

International Nuclear Information System (INIS)

Quan, C.H.; Ring, R.J.; McNaughton, S.J.

2002-01-01

In the frame work of the Cleaner Technology Project for Uranium Mining and Milling, Australian Nuclear and Technology Organization (ANSTO), Environment Division of ANSTO has carried out a programme of research which seeks to identify, investigate and develop cleaner technologies that have the potential to minimize the environmental impact of uranium mining and milling. This paper describes three design options of a new uranium mill that can meet environmental, technical and economical objectives. The feasibility of such an approach was examined in the laboratory and in a pilot plant study. (author)

Contamination risk of stable isotope samples during milling.

Science.gov (United States)

Isaac-Renton, M; Schneider, L; Treydte, K

2016-07-15

Isotope analysis of wood is an important tool in dendrochronology and ecophysiology. Prior to mass spectrometry analysis, wood must be homogenized, and a convenient method involves a ball mill capable of milling samples directly in sample tubes. However, sample-tube plastic can contaminate wood during milling, which could lead to biological misinterpretations. We tested possible contamination of whole wood and cellulose samples during ball-mill homogenization for carbon and oxygen isotope measurements. We used a multi-factorial design with two/three steel milling balls, two sample amounts (10 mg, 40 mg), and two milling times (5 min, 10 min). We further analyzed abrasion by milling empty tubes, and measured the isotope ratios of pure contaminants. A strong risk exists for carbon isotope bias through plastic contamination: the δ(13) C value of polypropylene deviated from the control by -6.77‰. Small fibers from PTFE filter bags used during cellulose extraction also present a risk as the δ(13) C value of this plastic deviated by -5.02‰. Low sample amounts (10 mg) showed highest contamination due to increased abrasion during milling (-1.34‰), which is further concentrated by cellulose extraction (-3.38‰). Oxygen isotope measurements were unaffected. A ball mill can be used to homogenize samples within test tubes prior to oxygen isotope analysis, but not prior to carbon or radiocarbon isotope analysis. There is still a need for a fast, simple and contamination-free sample preparation procedure. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Influence of firm related factors and industrial policy regime on technology based capacity utilization in sugar industry in Nigeria

OpenAIRE

Akpan, Sunday Brownson; Udo, U.J.; Essien, Ubon A.

2011-01-01

The study analyzed the technology based capacity utilization rate in sugar industry in Nigeria in the period 1970 to 2010. Data used in the study were obtained from the sugar firms, publications of the Central Bank of Nigeria and National Bureau of Statistics. Augmented Dicker Fuller unit root test was conducted on the specified data to ascertain their stationarity and order of integration. The result reveals that some variables were stationary at level while some were stationary at first dif...

Sugar maple height-diameter and age-diameter relationships in an uneven-aged northern hardwood stand

Science.gov (United States)

Laura S. Kenefic; R.D. Nyland

1999-01-01

Sugar maple (Acer saccharum Marsh.) height-diameter and age-diameter relationships are explored in a balanced uneven-aged northern hardwood stand in central New York. Results show that although both height and age vary considerably with diameter, these relationships can be described by statistically valid equations. The age-diameter relationship...

Management of wastes from uranium mines and mills

International Nuclear Information System (INIS)

Thomas, K.T.

1981-01-01

Uranium mining and milling operations have not given rise to much concern about their hazards, and with advancing technologies for mill processing and waste management, the situation will continue to improve. However, the disposal of large quantities of waste produced in mining and milling does have an environmental impact, owing to the long half-lives and the ready availability of the toxic radionuclides Ra-226 and Rn-222. This article deals with the management of wastes from uranium mines and mills

Mass loading and episodic variation of molecular markers in PM2.5 aerosols over a rural area in eastern central India

Science.gov (United States)

Nirmalkar, Jayant; Deshmukh, Dhananjay K.; Deb, Manas K.; Tsai, Ying I.; Sopajaree, Khajornsak

2015-09-01

The impact of biomass burning in atmospheric aerosols load is poorly known. We investigated the impact of biomass burning through molecular markers on the concentration of PM2.5 aerosol samples collected from a rural site in eastern central India during three episodic periods from October to November 2011. The collected PM2.5 samples were chemically quantified for potassium as well as sugars and dicarboxylic acids using ion chromatography. Levoglucosan and glucose were found as the most abundant sugar compounds and sugar-alcohols showed the predominance of mannitol whereas oxalic acid was the most abundant diacid followed by maleic acid in PM2.5 aerosols. Substantially enhanced concentrations of K+ as well as levoglucosan and glucose were observed in eastern central India. Analysis of the source specific molecular markers and ratios of sugars and diacids infer that combustion of biomass was the major emission sources of organic compounds associated with PM2.5 aerosols over eastern central India. We applied Spearman correlation analysis and principal component analysis to further investigate the sources of measured sugars and diacids. The concentrations of K+ and levoglucosan were significantly correlated with sugars and diacids that verifying their common sources from biomass burning emission. This study demonstrates that biomass burning for domestic heating and cooking purposes and agricultural activities significantly influence the air quality of eastern central India during the investigation period. The obtained data in this research is helpful for the global scientific community to assessments and remedial of air quality parameters in rural areas of developing countries under similar atmospheric circumstances.

Influence of passion fruit albedo, citric acid, and the pulp/sugar ratio on the quality of banana preserves

Directory of Open Access Journals (Sweden)

Igor Galvão Silva

2012-06-01

Full Text Available The objective of this research was to evaluate the effect of the citric acid concentration, pulp/sugar ratio, and albedo concentration of the passion fruit peel on physical, physiochemical, and sensorial characteristics of the 'Silver' banana preserves. A 2³ factorial design and 3 repetitions in the central point were used. The albedo concentration between 0 and 3% had significant influence on the reduction of the reducing sugars and on the decrease in titratable acidity. The increase in the pulp/sugar ratio exerted a negative effect on the pH and positive on the titratable acidity; the acid addition reduced the non-reducing sugar level. The sensorial evaluation and purchase intention indicated that the incorporation of a maximum of 1.5% albedo in formulations containing 50% pulp and 0.5% citric acid resulted in products with good acceptability in comparison with the formulation in which 60% pulp and an absence of acid or albedo is utilized.

Design and construction of an impoundment for precious metal mill tailings

International Nuclear Information System (INIS)

Moldt, S.F.; Miller, R.G.; Johnson, K.

1985-01-01

An engineering study and design of impoundments for the disposal of mill tailings is presented. The site is located in central Nevada, and the mill will incorporate conventional flotation followed by a carbon-in-pulp cyanide process for extraction of gold from ore. Mill process waste will be generated as flotation tailings and cyanide residue. Permeable site soils and environmental considerations required the prevention of infiltration of cyanide residue leachate into the subgrade. Geochemical modeling of flotation tailings indicated the potential for high concentration of iron and nickel to be present in the flotation tailings leachate. On-site soils were optimized for use in construction of the separate flotation tailings and cyanide residue impoundments. Embankments were constructed on compacted on-site sandy gravels. The cyanide residue impoundment was designed using a four-layer liner, utilizing all on-site soils and chemical soil additives. The liner consists of a leachate collection system over a low-permeability layer, which in turn is underlain by a leak detection drainage blanket and a low permeability subliner. The geochemical modeling performed in the analysis indicated that placement of a thin layer of oxidized surface soils, high in soluble sulfates, on the bottom of the flotation tailings impoundment would be sufficient to react with tailings leachate and cause precipitation of ferric oxide and the associated removal of nickel, permitting flotation tailings leachate to dilute acceptably with natural groundwater

Quality evaluation of compost produced from agro-industrialbyproducts of sugar cane

Directory of Open Access Journals (Sweden)

Alexander Bohórquez

2014-01-01

Full Text Available Fresh by products of the sugar industry (sugarcane sludge, bagasse and vinasse incorporated into the soil generate a negative impact on plants. Therefore, compost is an alternative solution to the use of sugarcane byproducts, which must meet the requirements of the Colombian technical standard 5167 for use as biofertilizer. This study aimed to evaluate the quality of compost made from different combinations of products of the milling process of sugar cane (Saccharum officinarum L.. Composting piles were established in the Ingenio Riopaila-Castilla, Valle del Cauca, Colombia, using a complete randomized block design with five treatments and four replications. 100% sugarcane sludge (T1, 75% sugarcane sludge and 25% bagasse (T2, 50% bagasse and 50% sugarcane sludge (T3, 25% sugarcane sludge and 75% bagasse (T4 and 100% bagasse (T5, all supplemented with 2 m3 of vinasse. The response variables: pH, electrical conductivity, moisture, ash, organic matter, moisture retention, the carbon-nitrogen ratio, the total oxidizable organic carbon, total nitrogen, phosphorus, calcium, magnesium, potassium, iron, copper, manganese and zinc, were evaluated at the time when the initial compost piles were prepared, and the 42, 51, 59, 73 and 90 days after beginning the process. The results showed that the carbon-nitrogen mixtures initial ratio is critical for obtaining a good quality of compost. The T3 provided the best quality with the highest content of nutrients. The composting time ensuring adequate maturation levels for nutrients in the compost was 90 days.

Development of a rapid method for the sequential extraction and subsequent quantification of fatty acids and sugars from avocado mesocarp tissue.

Science.gov (United States)

Meyer, Marjolaine D; Terry, Leon A

2008-08-27

Methods devised for oil extraction from avocado (Persea americana Mill.) mesocarp (e.g., Soxhlet) are usually lengthy and require operation at high temperature. Moreover, methods for extracting sugars from avocado tissue (e.g., 80% ethanol, v/v) do not allow for lipids to be easily measured from the same sample. This study describes a new simple method that enabled sequential extraction and subsequent quantification of both fatty acids and sugars from the same avocado mesocarp tissue sample. Freeze-dried mesocarp samples of avocado cv. Hass fruit of different ripening stages were extracted by homogenization with hexane and the oil extracts quantified for fatty acid composition by GC. The resulting filter residues were readily usable for sugar extraction with methanol (62.5%, v/v). For comparison, oil was also extracted using the standard Soxhlet technique and the resulting thimble residue extracted for sugars as before. An additional experiment was carried out whereby filter residues were also extracted using ethanol. Average oil yield using the Soxhlet technique was significantly (P < 0.05) higher than that obtained by homogenization with hexane, although the difference remained very slight, and fatty acid profiles of the oil extracts following both methods were very similar. Oil recovery improved with increasing ripeness of the fruit with minor differences observed in the fatty acid composition during postharvest ripening. After lipid removal, methanolic extraction was superior in recovering sucrose and perseitol as compared to 80% ethanol (v/v), whereas mannoheptulose recovery was not affected by solvent used. The method presented has the benefits of shorter extraction time, lower extraction temperature, and reduced amount of solvent and can be used for sequential extraction of fatty acids and sugars from the same sample.

Optimisation of ultrasonic-assisted extraction of phenolic compounds, antioxidants, and anthocyanins from sugar beet molasses.

Science.gov (United States)

Chen, Mingshun; Zhao, Yi; Yu, Shujuan

2015-04-01

Response surface methodology was used to optimise experimental conditions for ultrasonic-assisted extraction (UAE) of functional components from sugar beet molasses. The central composite design (CCD) was used for the optimisation of extraction parameters in terms of total phenolic contents, antioxidant activities and anthocyanins. Result suggested the optimal conditions obtained by RSM for UAE from sugar beet molasses were as follows: HCl concentration 1.55-1.72 mol/L, ethanol concentration 57-63% (v/v), extraction temperature 41-48 °C, and extraction time 66-73 min. In the optimal conditions, the experimental total phenolic contents were 17.36 mg GAE/100mL, antioxidant activity was 16.66 mg TE/g, and total anthocyanins were 31.81 mg/100g of the sugar beet molasses extract, which were well matched the predicted values. Teen compounds, i.e. gallic acid, vanillin, hydroxybenzoic acid, syringic acid, cyanidin-3-O-rutinoside, cyanidin-3-O-glucoside, catechin, delphinidin-3-O-rutinoside, delphinidin-3-O-glucuronide and ferulic acid were determined by HPLC-DAD-MS/MS in sugar beet molasses. Copyright © 2014 Elsevier Ltd. All rights reserved.

78 FR 31315 - Kraft Pulp Mills NSPS Review

Science.gov (United States)

2013-05-23

... Kraft Pulp Mills NSPS Review; Proposed Rule #0;#0;Federal Register / Vol. 78 , No. 100 / Thursday, May...-OAR-2012-0640; FRL-9815-9] RIN 2060-AR64 Kraft Pulp Mills NSPS Review AGENCY: Environmental Protection... performance standards for kraft pulp mills. These revised standards include particulate matter emission limits...

The UK sugar tax - a healthy start?

Science.gov (United States)

Jones, C M

2016-07-22

The unexpected announcement by the UK Chancellor of the Exchequer of a levy on sugar sweetened beverages (SSBs) on the 16 March 2016, should be welcomed by all health professionals. This population based, structural intervention sends a strong message that there is no place for carbonated drinks, neither sugared nor sugar-free, in a healthy diet and the proposed levy has the potential to contribute to both general and dental health. The sugar content of drinks exempt from the proposed sugar levy will still cause tooth decay. Improving the proposed tax could involve a change to a scaled volumetric tax of added sugar with a lower exemption threshold. External influences such as the Common Agricultural Policy and the Transatlantic Trade and Investment Partnership may negate the benefits of the sugar levy unless it is improved. However, the proposed UK sugar tax should be considered as a start in improving the nation's diet.

COMPUTER SYSTEM FOR DETERMINATION OF COST DAILY SUGAR PRODUCTION AND INCIDENTS DECISIONS FOR COMPANIES SUGAR (SACODI

Directory of Open Access Journals (Sweden)

Alejandro Álvarez-Navarro

2016-01-01

Full Text Available The process of sugar production is complex; anything that affects this chain has direct repercussions in the sugar production’s costs, it’s synthetic and decisive indicator for the taking of decisions. Currently the Cuban sugar factory determine this cost weekly, for that, its process of taking of decisions is affected. Looking for solutions to this problem, the present work, being part of a territorial project approved by CITMA, intended to calculate the cost of production daily, weekly, monthly and accumulated until indicated date, according to an adaptation to the methodology used by the National Costs System of sugarcane created by the MINAZ, it’s supported by a computer system denominated SACODI. This adaptation registers the physical and economic indicators of all direct and indirect expenses of the  sugarcane and besides this information generates an economic-mathematical model of goal programming whose solution indicates the best balance in amount of sugar of the entities of the sugar factory, in short term. The implementation of the system in the sugar factory «Julio A. Mella» in Santiago de Cuba in the sugar-cane production 08-09 produced an estimate of decrease of the cost of until 3,5 % for the taking of better decisions. 

Uranium mining and milling

International Nuclear Information System (INIS)

Floeter, W.

1976-01-01

In this report uranium mining and milling are reviewed. The fuel cycle, different types of uranium geological deposits, blending of ores, open cast and underground mining, the mining cost and radiation protection in mines are treated in the first part of this report. In the second part, the milling of uranium ores is treated, including process technology, acid and alkaline leaching, process design for physical and chemical treatment of the ores, and the cost. Each chapter is clarified by added figures, diagrams, tables, and flowsheets. (HK) [de

Improved oral bioavailability of probucol by dry media-milling.

Science.gov (United States)

Li, Jia; Yang, Yan; Zhao, Meihui; Xu, Hui; Ma, Junyuan; Wang, Shaoning

2017-09-01

The polymer/probucol co-milled mixtures were prepared to improve drug dissolution rate and oral bioavailability. Probucol, a BCS II drug, was co-milled together with Copovidone (Kollidon VA64, VA64), Soluplus, or MCC using the dry media-milling process with planetary ball-milling equipment. The properties of the milled mixtures including morphology, crystal form, vitro drug dissolution and in vivo oral bioavailability in rats were evaluated. Probucol existed as an amorphous in the matrix of the co-milled mixtures containing VA64, which helped to enhance drug dissolution. The ternary mixture composed of VA64, RH40, and probucol showed increased dissolution rates in both sink and non-sink conditions. It also had a higher oral bioavailability compared to the reference formulation. Dry-media milling of binary or ternary mixtures composed of drug, polymer and surfactant possibly have wide applications to improve dissolution rate and oral bioavailability of water-insoluble drugs. Copyright © 2017 Elsevier B.V. All rights reserved.

PENGARUH TEKNIK PENYAYATAN PAHAT MILLING PADA CNC MILLING 3 AXIS TERHADAP TINGKAT KEKASARAN PERMUKAAN BENDA BERKONTUR

Directory of Open Access Journals (Sweden)

Irawan Irawan

2016-06-01

Full Text Available Dalam perindustrian penggunaan mesin CNC Milling sangat di andalkan untuk mendapatkan hasil yang optimum baik secara kualitas maupun kuantitas. Akan tetapi muncul permasalahan,bagaimana pengaruh perbedaan teknik penyayatan terhadap nilai kekasaran permukaan benda kerja berkontur dalam proses milling CNC. Penelitian ini bertujuan untuk mengetahui pengaruh metode penyayatan pahat milling terhadap kekasaran permukaan benda kerja berkontur yang di hasilkan pada proses freis dengan menggunakan mesin milling CNC - 3Axis Makino S33. Peneliitan ini merancang dan membuat molding Cover stop kontak dikarenakan permukaan produk cover stop kontak memiliki permukaan yang berkontur. Molding ini terdiri dari Core dan Cavity. Benda kerja yang akan di ujicoba adalah bagian Core sebanyak 3 buah. Dalam pengerjaanya benda ujicoba diberikan perlakuan yang sama antara lain, kedalaman pemotongan, kecepatan spindle, dan jenis pahat yang di gunakan, kemudian dari ke 3 benda kerja tersebut masing- masing di tentukan 3 titik pengukuran. Dari hasil pengujian yang di peroleh kemudian dilakukan analisis tabel. Nilai kekasaran permukaan terendah (rata-rata kekasaran 0.899µ m dengan waktu permesinan tercepat (waktu proses 1 jam 08 menit pada penggunaan metode penyayatan 3D offset finishing. Penulis menyarankan agar dalam proses freis menggunakan mesin milling CNC 3Axis Makino S33 pada permukaan benda yang berkontur, untuk mendapatkan nilai kekasaran yang terendah disarankan menggunakan metode penyayatan 3D offset finishing.

Two Islands, One Commodity: Cuba, Java, and the Global Sugar Trade (1790-1930

Directory of Open Access Journals (Sweden)

Jonathan Curry-Machado

2012-12-01

Full Text Available Sugar had become, by the eighteenth century, a global commodity. Originating in East Asia, plantations in the Americas fed the growing taste for its use in Europe, with its consumption increasingly popularised. The 1791 Revolution in Saint Domingue (Haiti and the 1807 British abolition of the slave trade prompted shifts in the epicentres of sugar, the most important of these being arguably to Cuba and Java. These two fertile islands saw the burgeoning development of sugar-plantation systems with major inputs of foreign capital and forced labour. In the process the two islands each, respectively, became central to the very much truncated Spanish and Dutch colonial empires left after the Napoleonic wars and the Latin American wars of liberation; and by the mid-nineteenth century in the case of Cuba, and by the late nineteenth century in the case of Java, they had been catapulted to global sugar pre-eminence. There has been an abundance of study on the two islands each in their own right, but none systematically examines their parallel trajectories. Yet the question arises as to how sugar came to dominate the agriculture, industry and trade of these two islands; and how these two islands in particular, in two different colonial systems and parts of the world, should rise to sugar pre-eminence in the way they did and when they did. Are there connections and similarities between the two that help explain this phenomenon? This article analyses the conditions that led Java and Cuba to become the prime cane-sugar exporters of the nineteenth and early twentieth centuries. Initiative for this came from the linkages between their dominant elites and the transnational, transimperial networks of trade and capital. This furthered the stimulation of technological and scientific innovation in both, enabled not only through the introduction of the latest advances in machinery and method, but also the immigration of technical skilled workers from Europe and North

Arabidopsis scaffold protein RACK1A modulates rare sugar D-allose regulated gibberellin signaling.

Science.gov (United States)

Fennell, Herman; Olawin, Abdulquadri; Mizanur, Rahman M; Izumori, Ken; Chen, Jin-Gui; Ullah, Hemayet

2012-11-01

As energy sources and structural components, sugars are the central regulators of plant growth and development. In addition to the abundant natural sugars in plants, more than 50 different kinds of rare sugars exist in nature, several of which show distinct roles in plant growth and development. Recently, one of the rare sugars, D-allose, an epimer of D-glucose at C3, is found to suppress plant hormone gibberellin (GA) signaling in rice. Scaffold protein RACK1A in the model plant Arabidopsis is implicated in the GA pathway as rack1a knockout mutants show insensitivity to GA in GA-induced seed germination. Using genetic knockout lines and a reporter gene, the functional role of RACK1A in the D-allose pathway was investigated. It was found that the rack1a knockout seeds showed hypersensitivity to D-allose-induced inhibition of seed germination, implicating a role for RACK1A in the D-allose mediated suppression of seed germination. On the other hand, a functional RACK1A in the background of the double knockout mutations in the other two RACK1 isoforms, rack1b/rack1c, showed significant resistance to the D-allose induced inhibition of seed germination. The collective results implicate the RACK1A in the D-allose mediated seed germination inhibition pathway. Elucidation of the rare sugar signaling mechanism will help to advance understanding of this less studied but important cellular signaling pathway.

Viabilidade econômica de uma Biofabrica para controle da Cigarrinha das Raízesem Usina de Açúcar e Álcool = Economic viability of a biofactory to control a leafhopper the root of cane sugar on sugar mill and alcohol

Directory of Open Access Journals (Sweden)

João Adalberto Palucci

2015-07-01

plague. Thus, this study aimed to survey costs for implementation of a biofactory of Metharizium anisoplieae in a sugar mill and alcohol to the feasibility study, using the method to analyze cash flow and some indicators such as NPV, IRR and Payback. The financial indicators were a NPV of R $ 66,404.28, IRR of 15.49% and the initial investment recovery period of 4.21 years, however when analyzing the sensitivity of the project we have that, short term, the project is unfeasible.

Model Predictive Control for an Industrial SAG Mill

DEFF Research Database (Denmark)

Ohan, Valeriu; Steinke, Florian; Metzger, Michael

2012-01-01

identication. When applied to MIMO systems we call this controller a MIMO-ARX based MPC. We use an industrial Semi-Autogenous Grinding (SAG) mill to illustrate the performance of this controller. SAG mills are the primary units in a grinding chain and also the most power consuming units. Therefore, improved...... control of SAG mills has the potential to signicantly improve eciency and reduce the specic energy consumption for mineral processes. Grinding circuits involving SAG mills are multivariate processes. Commissioning of a control system based on a classical single-loop controllers with logic is time...

Completion of the uranium mill tailings remedial project and cleanup of the former mill site at Grand Junction, Colorado

International Nuclear Information System (INIS)

Rael, G.J.; Cox, S.W.; Artiglia, E.W.

2000-01-01

The United States Department of Energy's Uranium Mill Tailings Remedial Action (UMTRA) Surface Project has successfully completed the cleanup of 22 former uranium mill sites, more than 5400 vicinity properties, and has constructed 18 entombment cells. The Project has recently received the United States Nuclear Regulatory Commission's approval and certification for the last two disposal sites, with these sites being placed under the general license for long term custodial care of residual radioactive material. The UMTRA site located at Grand Junction, Colorado is a good example of the technical, political, economic, and public relations challenges that were overcome in achieving success. The UMTRA Team discussed, negotiated, planned, and eventually acted on this uranium mill tailings problem and brought the project to a successful conclusion for the community. From the early 1940s through the 1970s, uranium ore was mined in significant quantities under United States federal contracts for the government's national defence programmes, i.e. the Manhattan Engineering District and Atomic Energy Commission programmes. The problem started as the need for uranium decreased in the late 1960s, resulting in mills shutting down, leaving behind large quantities of process waste tailings and contaminated mill buildings. The former Climax Uranium Company mill site in Grand Junction was one of the largest of these sites. (author)

7 CFR 868.301 - Definition of milled rice.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Definition of milled rice. 868.301 Section 868.301... FOR CERTAIN AGRICULTURAL COMMODITIES United States Standards for Milled Rice Terms Defined § 868.301 Definition of milled rice. Whole or broken kernels of rice (Oryza sativa L.) from which the hulls and at...

Effect of Milling Time on the Microstructure, Physical and Mechanical Properties of Al-Al₂O₃ Nanocomposite Synthesized by Ball Milling and Powder Metallurgy.

Science.gov (United States)

Toozandehjani, Meysam; Matori, Khamirul Amin; Ostovan, Farhad; Abdul Aziz, Sidek; Mamat, Md Shuhazlly

2017-10-26

The effect of milling time on the morphology, microstructure, physical and mechanical properties of pure Al-5 wt % Al₂O₃ (Al-5Al₂O₃) has been investigated. Al-5Al₂O₃ nanocomposites were fabricated using ball milling in a powder metallurgy route. The increase in the milling time resulted in the homogenous dispersion of 5 wt % Al₂O₃ nanoparticles, the reduction of particle clustering, and the reduction of distances between the composite particles. The significant grain refining during milling was revealed which showed as a reduction of particle size resulting from longer milling time. X-Ray diffraction (XRD) analysis of the nanocomposite powders also showed that designated ball milling contributes to the crystalline refining and accumulation of internal stress due to induced severe plastic deformation of the particles. It can be argued that these morphological and microstructural variations of nanocomposite powders induced by designated ball milling time was found to contribute to an improvement in the density, densification, micro-hardness ( HV ), nano-hardness ( HN ), and Young's modulus ( E ) of Al-5Al₂O₃ nanocomposites. HV , HN , and E values of nanocomposites were increased by ~48%, 46%, and 40%, after 12 h of milling, respectively.

Assessment of Coriolopsis gallica-treated olive mill wastewater phytotoxicity on tomato plants.

Science.gov (United States)

Daâssi, Dalel; Sellami, Sahar; Frikha, Fakher; Rodriguez-Couto, Susana; Nasri, Moncef; Mechichi, Tahar

2016-08-01

The aim of the present study was to evaluate the phytotoxicity of olive mill wastewater (OMW) after being treated by the white-rot fungus Coriolopsis gallica. For this, the effect of irrigation with treated OMW (TOMW) and untreated OMW (UOMW) on tomato plants (Lycopersicon esculentum) for 3 weeks was studied. The control plants were irrigated with distilled water. Agronomic tests were performed in pot experiments in a greenhouse using the randomized complete block (RCB) experimental design. The relative leaf height (RLH), as a morphological parameter, and the content of total phenols in the roots and total chlorophyll [Cha + Chb] and reducing sugars in the leaves, as physiological parameters, were selected as responses of the experimental design. The results obtained showed that [Cha + Chb] in the leaves of tomato growth under TOMW was enhanced by 36.3 and 19.4 % compared to the plant growth under UOMW and to the controls, respectively. Also, reducing sugar concentrations were closed to those of the control plants, ranging from 0.424 to 0.678 g/L for the different dilutions tested. However, the plants irrigated with UOMW showed lower reducing sugar concentrations ranging from 0.042 to 0.297g/L. The optimum RLH (0.537) was observed in the plants irrigated with TOMW diluted at (1:4), this value being higher than that observed in the controls (0.438). Our study proved that the irrigation with TOMW significantly improved tomato growth and photosynthesis activity over those irrigated with UOMW. Optimization of TOMW as a fertilizer was obtained for a dilution of 1:4. From the obtained results, it can be concluded that OMW treated by C. gallica holds potential to be used as a fertilizer for tomato plants. Graphical Abstract ᅟ Please provide a caption for the graphical abstract.The graphical abstract is improved and sent as attachment Please replace it.

Fault Detection in Coal Mills used in Power Plants

DEFF Research Database (Denmark)

Odgaard, Peter Fogh; Mataji, Babak

2006-01-01

In order to achieve high performance and efficiency of coal-fired power plants, it is highly important to control the coal flow into the furnace in the power plant. This means suppression of disturbances and force the coal mill to deliver the required coal flow, as well as monitor the coal mill...... in order to detect faults in the coal mill when they emerge. This paper deals with the second objective. Based on a simple dynamic model of the energy balance a residual is formed for the coal mill. An optimal unknown input observer is designed to estimate this residual. The estimated residual is following...... tested on measured data of a fault in a coal mill, it can hereby be concluded that this residual is very useful for detecting faults in the coal mill....

Analytical Prediction of Three Dimensional Chatter Stability in Milling

Science.gov (United States)

Altintas, Yusuf

The chip regeneration mechanism during chatter is influenced by vibrations in three directions when milling cutters with ball end, bull nose, or inclined cutting edges are used. A three dimensional chatter stability is modeled analytically in this article. The dynamic milling system is formulated as a function of cutter geometry, the frequency response of the machine tool structure at the cutting zone in three Cartesian directions, cutter engagement conditions and material property. The dynamic milling system with nonlinearities and periodic delayed differential equations is reduced to a three dimensional linear stability problem by approximations based on the physics of milling. The chatter stability lobes are predicted in the frequency domain using the proposed analytical solution, and verified experimentally in milling a Titanium alloy with a face milling cutter having circular inserts.

Rising critical emission of air pollutants from renewable biomass based cogeneration from the sugar industry in India

International Nuclear Information System (INIS)

Sahu, S K; Ohara, T; Nagashima, T; Beig, G; Kurokawa, J

2015-01-01

In the recent past, the emerging India economy is highly dependent on conventional as well as renewable energy to deal with energy security. Keeping the potential of biomass and its plentiful availability, the Indian government has been encouraging various industrial sectors to generate their own energy from it. The Indian sugar industry has adopted and made impressive growth in bagasse (a renewable biomass, i.e. left after sugercane is crushed) based cogeneration power to fulfil their energy need, as well as to export a big chunk of energy to grid power. Like fossil fuel, bagasse combustion also generates various critical pollutants. This article provides the first ever estimation, current status and overview of magnitude of air pollutant emissions from rapidly growing bagasse based cogeneration technology in Indian sugar mills. The estimated emission from the world’s second largest sugar industry in India for particulate matter, NO X, SO 2 , CO and CO 2 is estimated to be 444 ± 225 Gg yr −1 , 188 ± 95 Gg yr −1 , 43 ± 22 Gg yr −1 , 463 ± 240 Gg yr −1 and 47.4 ± 9 Tg yr −1 , respectively in 2014. The studies also analyze and identify potential hot spot regions across the country and explore the possible further potential growth for this sector. This first ever estimation not only improves the existing national emission inventory, but is also useful in chemical transport modeling studies, as well as for policy makers. (letter)

Replacing chemicals in recycle mills with mechanical alternatives

Energy Technology Data Exchange (ETDEWEB)

Institute of Paper Science Technology

2002-07-01

A high-intensity spark fired underwater decomposes a small amount of the water into hydroxyl radicals, which are strong oxidants. These are able to oxidize contaminants such as glue and wood pitch that enter paper recycling mills as a part of the incoming furnish and cost the industry several hundred million dollars. The sparking technique is safe, inexpensive, and is capable of treating large volumes of water, which makes it attractive for mill applications. Several mill trials were run. Sparking caused a decrease in the tack of the deposits in one case. Lower bleach use occurred in two other mills; sparking reduced the degree of ink reattachment to fiber. The payback for either application is attractive. Sparking induced deposition of contaminants in another mill, which is a positive development--if it can be controlled. The technique is also able to degas water and to oxidize odor-causing sulfur compounds. Although one unit has been purchased by a mill, second-order effects caused by the technology needs to be defined further before the technology can be broadly applied.

Phase Transitions in Mechanically Milled Mn-Al-C Permanent Magnets

Directory of Open Access Journals (Sweden)

Michael J. Lucis

2014-04-01

Full Text Available Mn-Al powders were prepared by rapid solidification followed by high-energy mechanical milling. The rapid solidification resulted in single-phase ε. The milling was performed in both the ε phase and the τ phase, with the τ-phase formation accomplished through a heat treatment at 500 °C for 10 min. For the ε-milled samples, the conversion of the ε to the τ phase was accomplished after milling via the same heat treatment. Mechanical milling induced a significant increase in coercivity in both cases, reaching 4.5 kOe and 4.1 kOe, respectively, followed by a decrease upon further milling. The increase in coercivity was the result of grain refinement induced by the high-energy mechanical milling. Additionally, in both cases a loss in magnetization was observed. Milling in the ε phase showed a smaller decrease in the magnetization due to a higher content of the τ phase. The loss in magnetization was attributed to a stress-induced transition to the equilibrium phases, as no site disorder or oxidation was observed. Surfactant-assisted milling in oleic acid also improved coercivity, but in this case values reached >4 kOe and remained stable at least through 32 h of milling.

Intake of added sugar in Malaysia: a review.

Science.gov (United States)

Amarra, Maria Sofia V; Khor, Geok Lin; Chan, Pauline

2016-01-01

The term 'added sugars' refers to sugars and syrup added to foods during processing or preparation, and sugars and syrups added at the table. Calls to limit the daily intakes of added sugars and its sources arose from evidence analysed by WHO, the American Heart Association and other organizations. The present review examined the best available evidence regarding levels of added sugar consumption among different age and sex groups in Malaysia and sources of added sugars. Information was extracted from food balance sheets, household expenditure surveys, nutrition surveys and published studies. Varying results emerged, as nationwide information on intake of sugar and foods with added sugar were obtained at different times and used different assessment methods. Data from the 2003 Malaysian Adult Nutrition Survey (MANS) using food frequency questionnaires suggested that on average, Malaysian adults consumed 30 grams of sweetened condensed milk (equivalent to 16 grams sugar) and 21 grams of table sugar per day, which together are below the WHO recommendation of 50 grams sugar for every 2000 kcal/day to reduce risk of chronic disease. Published studies suggested that, for both adults and the elderly, frequently consumed sweetened foods were beverages (tea or coffee) with sweetened condensed milk and added sugar. More accurate data should be obtained by conducting population-wide studies using biomarkers of sugar intake (e.g. 24-hour urinary sucrose and fructose excretion or serum abundance of the stable isotope 13C) to determine intake levels, and multiple 24 hour recalls to identify major food sources of added sugar.

Flour mill stream blending affects sugar snap cookie and Japanese sponge cake quality and oxidative cross-linking potential of soft white wheat.

Science.gov (United States)

The purpose of this research was to study the functional differences between straight grade (75% extraction rate) and patent (60% extraction rate) flour blends from 28 genetically pure soft white and club wheat grain lots, as evidenced by variation in sugar snap cookie and Japanese sponge cake quali...

Association of Dietary Sugars and Sugar-Sweetened Beverage Intake with Obesity in Korean Children and Adolescents

Directory of Open Access Journals (Sweden)

Kyungho Ha

2016-01-01

Full Text Available Few studies have examined the association between dietary sugar intake and obesity in Asian children and adolescents. We evaluated the association of dietary sugar intake and its food source with obesity in Korean children and adolescents. In this cross-sectional analysis, data were obtained from five studies conducted between 2002 and 2011. The study included 2599 children and adolescents who had completed more than three days of dietary records and had anthropometric data. Total sugar intake was higher in girls than in boys (54.3 g for girls and 46.6 g for boys, p < 0.0001. Sugar intake from milk and fruits was inversely associated with overweight or obesity in girls only (OR for overweight, 0.52; 95% CI, 0.32–0.84; p for trend = 0.0246 and OR for obesity, 0.42; 95% CI, 0.23–0.79; p for trend = 0.0113. Sugar-sweetened beverage (SSB consumption was not associated with obesity in girls, while boys had lower odds ratios for obesity (OR for obesity, 0.52; 95% CI, 0.26–1.05; p for trend = 0.0310. These results suggest that total sugars and SSB intake in Asian children and adolescents remains relatively low and sugar intake from milk and fruits is associated with a decreased risk of overweight or obesity, especially in girls.

Association of Dietary Sugars and Sugar-Sweetened Beverage Intake with Obesity in Korean Children and Adolescents.

Science.gov (United States)

Ha, Kyungho; Chung, Sangwon; Lee, Haeng-Shin; Kim, Cho-il; Joung, Hyojee; Paik, Hee-Young; Song, YoonJu

2016-01-08

Few studies have examined the association between dietary sugar intake and obesity in Asian children and adolescents. We evaluated the association of dietary sugar intake and its food source with obesity in Korean children and adolescents. In this cross-sectional analysis, data were obtained from five studies conducted between 2002 and 2011. The study included 2599 children and adolescents who had completed more than three days of dietary records and had anthropometric data. Total sugar intake was higher in girls than in boys (54.3 g for girls and 46.6 g for boys, p < 0.0001). Sugar intake from milk and fruits was inversely associated with overweight or obesity in girls only (OR for overweight, 0.52; 95% CI, 0.32-0.84; p for trend = 0.0246 and OR for obesity, 0.42; 95% CI, 0.23-0.79; p for trend = 0.0113). Sugar-sweetened beverage (SSB) consumption was not associated with obesity in girls, while boys had lower odds ratios for obesity (OR for obesity, 0.52; 95% CI, 0.26-1.05; p for trend = 0.0310). These results suggest that total sugars and SSB intake in Asian children and adolescents remains relatively low and sugar intake from milk and fruits is associated with a decreased risk of overweight or obesity, especially in girls.

27 CFR 24.181 - Use of sugar.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Use of sugar. 24.181... OF THE TREASURY LIQUORS WINE Production of Wine § 24.181 Use of sugar. Only sugar, as defined in § 24.10, may be used in the production of standard wine. The quantity of sugar used will be determined...

Practitioner Profile: An Interview With Amanda Mills

Directory of Open Access Journals (Sweden)

Amanda Mills

2012-01-01

Full Text Available For more than 25 years, Amanda Mills has been working with arts organizations across Canada and with artists of all kinds to assist them in achieving financial sanity. She has taught business management at the University of Victoria and has prepared thousands of tax returns for writers, visual artists, choreographers, actors, filmmakers, broadcasters, and creative entrepreneurs. Ten years ago, bringing together her work on trauma, with twenty years of business management, Mills founded Loose Change Financial Therapy – the place where money and feelings meet. Mills has presented Loose Change workshops for social workers, teachers, psychotherapists, artists, anti-poverty activists, sex trade workers, women’s groups, and the general public.  She has been a guest on major Canadian radio and television broadcasts and profiled in many major Canadian newspapers and periodicals. Mills is also a crisis counselor and co-wrote a bestselling book on recovering from trauma. A tax professional and business manager, she is certified as a financial counselor under the Bankruptcy and Insolvency Act. Mills is also currently completing a certificate in mediation.

GEOMETRICAL CHARACTERIZATION OF MICRO END MILLING TOOLS

DEFF Research Database (Denmark)

Borsetto, Francesca; Bariani, Paolo

The milling process is one of the most common metal removal operation used in industry. This machining process is well known since the beginning of last century and has experienced, along the years, many improvements of the basic technology, as concerns tools, machine tools, coolants/lubricants, ......The milling process is one of the most common metal removal operation used in industry. This machining process is well known since the beginning of last century and has experienced, along the years, many improvements of the basic technology, as concerns tools, machine tools, coolants....../lubricants, milling strategies and controls. Moreover the accuracy of tool geometry directly affects the performance of the milling process influencing the dimensional tolerances of the machined part, the surface topography, the chip formation, the cutting forces and the tool-life. The dimensions of certain...... geometrical details, as for instance the cutting edge radius, are determined by characteristics of the manufacturing process, tool material, coating etc. While for conventional size end mills the basic tool manufacturing process is well established, the reduction of the size of the tools required...

EPA's role in uranium mining and milling

International Nuclear Information System (INIS)

Smith, P.B.

1980-01-01

EPA's role and actions in regulating uranium mining and milling are reviewed and updated. Special emphasis is given to EPA's current activities under the Uranium Mill Tailings Radiation Control Act of 1978

Inorganic elements in sugar samples

International Nuclear Information System (INIS)

Salles, Paulo M.B. de; Campos, Tarcisio P.R. de

2013-01-01

Sugar is considered a safe food ingredient; however, it can be contaminated by organic elements since its planting until its production process. Thus, this study aims at checking the presence of inorganic elements in samples of crystal, refined and brown sugar available for consumption in Brazil. The applied technique was neutron activation analysis, the k 0 method, using the TRIGA MARK - IPR-R1 reactor located at CDTN/CNEN, in Belo Horizonte. It was identified the presence of elements such as, Au, Br, Co, Cr, Hf, K, Na, Sb, Sc and Zn in the samples of crystal/refined sugar and the presence of As, Au, Br, Ca, Co, Cr, Cs, Fe, Hf, K, Na, Sb, Sc, Sm, Sr, Th and Zn in the brown sugar samples. The applied technique was appropriate to this study because it was not necessary to put the samples in solution, essential condition in order to apply other techniques, avoiding contaminations and sample losses, besides allowing a multi elementary detection in different sugar samples. (author)

Inorganic elements in sugar samples

Energy Technology Data Exchange (ETDEWEB)

Salles, Paulo M.B. de; Campos, Tarcisio P.R. de, E-mail: pauladesalles@yahoo.com.br, E-mail: tprcampos@pq.cnpq.br [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Menezes, Maria Angela de B.C., E-mail: menezes@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2013-07-01

Sugar is considered a safe food ingredient; however, it can be contaminated by organic elements since its planting until its production process. Thus, this study aims at checking the presence of inorganic elements in samples of crystal, refined and brown sugar available for consumption in Brazil. The applied technique was neutron activation analysis, the k{sub 0} method, using the TRIGA MARK - IPR-R1 reactor located at CDTN/CNEN, in Belo Horizonte. It was identified the presence of elements such as, Au, Br, Co, Cr, Hf, K, Na, Sb, Sc and Zn in the samples of crystal/refined sugar and the presence of As, Au, Br, Ca, Co, Cr, Cs, Fe, Hf, K, Na, Sb, Sc, Sm, Sr, Th and Zn in the brown sugar samples. The applied technique was appropriate to this study because it was not necessary to put the samples in solution, essential condition in order to apply other techniques, avoiding contaminations and sample losses, besides allowing a multi elementary detection in different sugar samples. (author)

Immunomodulating pectic polysaccharides from waste rose petals of Rosa damascena Mill.

Science.gov (United States)

Slavov, Anton; Kiyohara, Hiroaki; Yamada, Haruki

2013-08-01

A water-soluble polysaccharide (RP-1) was obtained from distilled rose petals of Rosa damascena Mill. as an attempt for valorization of the waste. RP-1 showed in vitro intestinal immune system modulating activity through Peyer's patch cells and IL-6 producing activity from macrophages. RP-1 lost most of its immunomodulating activity by degradation of the carbohydrate moiety with periodate. RP-1 was fractionated by anion-exchange and gel filtration chromatography and some of the fractions showed significant intestinal immune system modulating activity. The active fractions were suggested to be pectic polysaccharides and type II arabino-3,6-galactan from the component sugar analyses and the reactivity with Yariv antigen. When some active fractions were digested with endo α-d-(1→4)-polygalacturonase, highest molecular weight fragments which were considered as rhamnogalacturonan I, showed potent immunomodulating activities. To our knowledge, this is a first report which explores the possibility for utilization of waste rose petals as a source of immunomodulating pectic polysaccharides. Copyright © 2013 Elsevier B.V. All rights reserved.

Reclamation of uranium mining and milling disturbances

International Nuclear Information System (INIS)

Farmer, E.E.; Schuman, G.E.

1987-01-01

Since 1945 the history of uranium mining and milling in the US has been a story of wide fluctuations in market prices and in mining and milling capacity. The late 1960's and the 1970's saw a sizeable reduction in the production of yellowcake because of an earlier over-supply, a leveling off of the military demand, and a failure of the nuclear electric power industry to create the anticipated commercial demand. The decline in the domestic production of yellowcake has continued through the early 1980's to the present. Today, there are five operating uranium mills in the US: one in Wyoming, two in Utah, one in New Mexico, and one in Texas. Of these five mills, three are operating on a reduced schedule, as little as three days a month. A significant portion of the current US production of uranium goes overseas to fulfill Japanese, French, and other European contracts. There is still a sizeable reclamation job to be accomplished on old uranium wastes, both tailings impoundments and overburden embankments. Before the Uranium Mill Tailings Control Act of 1978 (PL 95-604), reclamation was frequently omitted altogether, or else done in a haphazard fashion. We do not know the total area of unreclaimed, radioactive, uranium overburden wastes in the western US, but the area is large, probably several thousand hectares. Fortunately, these overburden wastes are almost entirely located in remote areas. Mill tailings are more difficult to reclaim than overburden, and tailings represent a more serious health hazards. There are approximately 25 million metric tons of unreclaimed uranium mill tailings, with variable health hazards, located in the US

Greenhouse gas emission of biogas production out of silage maize and sugar beet – An assessment along the entire production chain

International Nuclear Information System (INIS)

Jacobs, Anna; Auburger, Sebastian; Bahrs, Enno; Brauer-Siebrecht, Wiebke; Christen, Olaf; Götze, Philipp; Koch, Heinz-Josef; Rücknagel, Jan; Märländer, Bernward

2017-01-01

Highlights: • GHG-emission, bioenergy yield, GHG-saving potential based on field trial data. • Results complement the absence of default values, especially for sugar beet. • Results represent Central European conditions of crop and biogas production. - Abstract: The study delivers values on greenhouse gas (GHG)-emission via cultivation of silage maize and sugar beet and of GHG-saving potential of electricity produced from biogas out of both biomass crops. Data are based on three rainfed crop rotation field trials in Germany (2011–2014) representative for Central Europe and can serve as default values. It was found that GHG-emission via crop cultivation was driven mainly by nitrous oxide emission from soil and mineral N-fertilizer use and was 2575–3390 kg carbon dioxide equivalents (CO_2eq) per hectare for silage maize and 2551–2852 kg CO_2eq ha"−"1 for sugar beet (without biogas digestate application). Integrating a GHG-credit for surplus N in the biogas digestate reduced total GHG-emission via crop cultivation to 65–69% for silage maize but only to 84–97% for sugar beet. The GHG-saving potential of electricity production from biogas was calculated for three biogas plants differing in technical characteristics. The GHG-saving potentials were generally >70% (silage maize: 78–80%, sugar beet: 72–76%) and the authors concluded that the technical setting of the biogas plant had a slight impact only. Overall, the authors assumed that the major potential for GHG-emission's reduction along the bioenergy production chain were N-management during crop cultivation and methane losses at the biogas plant. Finally, sugar beet, if cultivated in crop rotation, was shown to be an efficient alternative to silage maize as a biomass crop in order to achieve a higher diversity in biomass crop cultivation.

Textual analysis of sugar industry influence on the World Health Organization’s 2015 sugars intake guideline

Science.gov (United States)

Reeves, Aaron; Loopstra, Rachel; McKee, Martin

2016-01-01

Abstract Objective To determine whether sugar industry-related organizations influenced textual changes between the draft and final versions of the World Health Organization’s (WHO’s) 2015 guideline Sugars intake for adults and children. Methods Stakeholder consultation submissions on the draft guideline from seven sugar industry-related and 10 public health organizations were assessed using the Wordscores program. Document scores were rescaled using the Martin–Vanberg transformation to improve comparability. Draft and final guidelines were compared to identify changes influenced by the sugar industry and public health organizations. Findings There was a small shift in transformed Wordscores score between the draft and final guidelines, from 0.25 to 0.24, towards the industry position. The change was linked to increased use of the word “low” to describe the quality of the evidence, consistent with industry arguments. There was also a shift from use of the word “consumption” to “intake”, irrespective of policy position. Scores for World Sugar Research Organisation and Sugar Nutrition UK submissions ( 0.11 and 0.18, respectively) represented strong pro-industry positions and scores for European Public Health Alliance and Wemos submissions (1.00 and 0.88, respectively) represented the strongest public health positions. Industry tactics included challenging the quality of the evidence, distinguishing between different types of sugar and advocating harm reduction. Conclusion There was little change between draft and final versions of the WHO sugars intake guideline 2015, following industry consultation. The main change was linked to emphasizing the low quality of the evidence on sugar’s adverse effects. Guideline development appeared relatively resistant to industry influence at the stakeholder consultation stage. PMID:27516634

Added sugars in kids' meals from chain restaurants

OpenAIRE

Scourboutakos, Mary J.; Semnani-Azad, Zhila; L'Abbé, Mary R.

2016-01-01

Objective To analyze the added sugars in kids' meals from Canadian chain restaurants in relation to the World Health Organization's proposed sugar recommendation (less than 5% of total daily calories should come from added sugars) and current recommendation (less than 10% of total daily calories should come from added sugars). Methods Total sugar levels were retrieved from the websites of 10 fast-food and 7 sit-down restaurants in 2010. The added sugar levels in 3178 kids' meals from Canadian...

27 CFR 24.317 - Sugar record.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Sugar record. 24.317... OF THE TREASURY LIQUORS WINE Records and Reports § 24.317 Sugar record. A proprietor who receives, stores, or uses sugar shall maintain a record of receipt and use. The record will show the date of...

Understanding dental CAD/CAM for restorations--dental milling machines from a mechanical engineering viewpoint. Part B: labside milling machines.

Science.gov (United States)

Lebon, Nicolas; Tapie, Laurent; Duret, Francois; Attal, Jean-Pierre

2016-01-01

Nowadays, dental numerical controlled (NC) milling machines are available for dental laboratories (labside solution) and dental production centers. This article provides a mechanical engineering approach to NC milling machines to help dental technicians understand the involvement of technology in digital dentistry practice. The technical and economic criteria are described for four labside and two production center dental NC milling machines available on the market. The technical criteria are focused on the capacities of the embedded technologies of milling machines to mill prosthetic materials and various restoration shapes. The economic criteria are focused on investment cost and interoperability with third-party software. The clinical relevance of the technology is discussed through the accuracy and integrity of the restoration. It can be asserted that dental production center milling machines offer a wider range of materials and types of restoration shapes than labside solutions, while labside solutions offer a wider range than chairside solutions. The accuracy and integrity of restorations may be improved as a function of the embedded technologies provided. However, the more complex the technical solutions available, the more skilled the user must be. Investment cost and interoperability with third-party software increase according to the quality of the embedded technologies implemented. Each private dental practice may decide which fabrication option to use depending on the scope of the practice.

( Rosa damascena Mill.) by microbial inoculation

African Journals Online (AJOL)

This study was carried out to determine the effects of microbial inoculation in breaking seed dormancy and on the germination of Rosa damascena Mill. Seeds of R. damascena Mill. are the most used scented rose species in rose oil production. The most important production centers around the world are Turkey and ...

Electro persulphate oxidation for polishing of biologically treated palm oil mill effluent (POME).

Science.gov (United States)

Bashir, Mohammed J K; Wei, Chong Jia; Aun, Ng Choon; Abu Amr, Salem S

2017-05-15

Malaysia alone produces more than 49 million m 3 palm oil mill effluent per year. Biological treated palm oil mill effluent via ponding system often fails to fulfill the regulatory discharge standards. This is due to remaining of non-biodegradable organics in the treated effluent. Thus, the aim of this study was to resolve such issue by using electro persulphate oxidation process, for the first time, as a post treatment of palm oil mill effluent. Central composite design in response surface methodology was used to analyze and optimize the interaction of operational variables (i.e., current density, contact time, initial pH and persulphate dosage) targeted on maximum treatment efficiency. The significance of quadratic model of each response was determined by analysis of variance, where all models indicated sufficient significance with p-value < 0.0001. Optimum operational conditions with 45 mA/cm 2 of current density, 45 min of contact time, pH 4 and 0.892 g of S 2 O 8 2- proved that 77.70% of Chemical Oxygen Demand, 97.96% of colour as well as 99.72% of Suspended Solids removal were achieved. The final pH of 5.88 of the effluent was obtained that fulfilled the limit and suitable for direct discharge to the natural environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Drug-induced low blood sugar

Science.gov (United States)

Drug-induced low blood sugar is low blood glucose that results from taking medicine. ... Low blood sugar (hypoglycemia) is common in people with diabetes who are taking insulin or other medicines to control their diabetes. ...

21 CFR 184.1859 - Invert sugar.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Invert sugar. 184.1859 Section 184.1859 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Substances Affirmed as GRAS § 184.1859 Invert sugar. (a) Invert sugar (CAS Reg. No. 8013-17-0) is an aqueous...

Physicochemical study of bagasse and bagasse ash from the sugar industries of NWFP, pakistan and its recycling in cement manufacturing

International Nuclear Information System (INIS)

Ali, K.; Amin, N.U.; Shah, M.T.

2009-01-01

Bagasse and bagasse ash, obtained from the local sugar mills of North West Frontier Province (NWFP), Pakistan, were analyzed for both physical and chemical parameters. Among the physical parameters, the moisture, ash contents, volatile matter, loss on ignition, and calorific value have been determined while the chemical constituents such as SiO/sub 2/, AI/sub 2/O/sub 3/ Fe/sub 2/O/sub 3/ CaO, MgO, Na/sub 2/O, K/sub 2/O, carbon and sulfur were also determined in both baggase and baggase ash. The physicochemical characterization of baggase ash suggests that it can be used as a part of the cement admixture, which could be cost effective and environmentally sustainable. (author)

Yang-Mills analogs of general-relativistic solutions

International Nuclear Information System (INIS)

Singlton, D.

1998-01-01

Some solutions of Yang-Mills equations, which can be found with the use of the general relativistic theory and Yang-Mills theory, are discussed. Some notes concerning possible physical sense of these solutions are made. Arguments showing that some of such solutions in the Yang-Mills theory (similar to the general relativistic ones) may be connected with the confinement phenomenon are given in particular. The motion of probe particles located into the phonon potential similar to the Schwarz-Child one is briefly discussed for this purpose [ru

Potential link between excess added sugar intake and ectopic fat: a systematic review of randomized controlled trials.

Science.gov (United States)

Ma, Jiantao; Karlsen, Micaela C; Chung, Mei; Jacques, Paul F; Saltzman, Edward; Smith, Caren E; Fox, Caroline S; McKeown, Nicola M

2016-01-01

The effect of added sugar intake on ectopic fat accumulation is a subject of debate. A systematic review and meta-analysis of randomized controlled trials (RCTs) was conducted to examine the potential effect of added sugar intake on ectopic fat depots. MEDLINE, CAB Abstracts, CAB Global Health, and EBM (Evidence-Based Medicine) Reviews - Cochrane Central Register of Controlled Trials databases were searched for studies published from 1973 to September 2014. RCTs with a minimum of 6 days' duration of added sugar exposure in the intervention group were selected. The dosage of added sugar intake as a percentage of total energy was extracted or calculated. Means and standard deviations of pre- and post-test measurements or changes in ectopic fat depots were collected. Fourteen RCTs were included. Most of the studies had a medium to high risk of bias. Meta-analysis showed that, compared with eucaloric controls, subjects who consumed added sugar under hypercaloric conditions likely increased ectopic fat, particularly in the liver (pooled standardized mean difference = 0.9 [95%CI, 0.6-1.2], n = 6) and muscles (pooled SMD = 0.6 [95%CI, 0.2-1.0], n = 4). No significant difference was observed in liver fat, visceral adipose tissue, or muscle fat when isocaloric intakes of different sources of added sugars were compared. Data from a limited number of RCTs suggest that excess added sugar intake under hypercaloric diet conditions likely increases ectopic fat depots, particularly in the liver and in muscle fat. There are insufficient data to compare the effect of different sources of added sugars on ectopic fat deposition or to compare intake of added sugar with intakes of other macronutrients. Future well-designed RCTs with sufficient power and duration are needed to address the role of sugars on ectopic fat deposition. © The Author(s) 2015. Published by Oxford University Press on behalf of the International Life Sciences Institute. All rights reserved. For

Possibility as monosaccharide laxative of rare sugar alcohols.

Science.gov (United States)

Oosaka, Kazumasa

2009-05-01

Allitol, D-talitol and L-iditol are sugar alcohols that are rare in nature. Due to their previous rarity, little is known about the laxative effects of these rare sugar alcohols. Therefore, reliable data on the laxative effect that these sugar alcohols cause in experimental animals could help to evaluate the effectiveness of new monosaccharide laxative drugs. To investigate the laxative effect of rare sugar alcohols, the study was designed to observe the diarrhea that occurred after oral administration of these sugar alcohols in mice. Moreover, to investigate the influence on intestinal function of rare sugar alcohols, the study was designed to examine small intestine transit and the luminal water content. Results indicated that rare sugar alcohols have a laxative effect in mice. Diarrhea started at a dose of 4.95 g/kg of rare sugar alcohols. There was a statistically significant laxative effect for D-talitol and L-iditol at a dose of 9.9 g/kg as compared to vehicle. Moreover, rare sugar alcohols significantly increased the small intestinal transit and the luminal water content of the small intestine and cecum in mice as compared to each vehicle. Overall, L-iditol greatly changes the function of intestine. In conclusion, rare sugar alcohols increase water content in small intestine and accelerate small intestine transit. These results support laxative effect of rare sugar alcohols. Therefore, rare sugar alcohols may be useful as monosaccharide laxatives and may be used to treat constipation.

Reconciliation of opposing views on membrane-sugar interactions

DEFF Research Database (Denmark)

Andersen, Heidi D.; Wang, Chunhua; Arleth, Lise

2011-01-01

It is well established that small sugars exert different types of stabilization of biomembranes both in vivo and in vitro. However, the essential question of whether sugars are bound to or expelled from membrane surfaces, i.e., the sign and size of the free energy of the interaction, remains...... unresolved, and this prevents a molecular understanding of the stabilizing mechanism. We have used small-angle neutron scattering and thermodynamic measurements to show that sugars may be either bound or expelled depending on the concentration of sugar. At low concentration, small sugars bind quite strongly...... to a lipid bilayer, and the accumulation of sugar at the interface makes the membrane thinner and laterally expanded. Above â¼0.2 M the sugars gradually become expelled from the membrane surface, and this repulsive mode of interaction counteracts membrane thinning. The dual nature of sugar...

Milling and dispersion of multi-walled carbon nanotubes in texanol

Science.gov (United States)

Darsono, Nono; Yoon, Dang-Hyok; Kim, Jaemyung

2008-03-01

Rheological results were used to determine the optimum type of dispersant and its concentration for six commercial dispersants for the dispersion of multi-walled carbon nanotube (MWCNT) agglomerates in texanol. An unsaturated polycarboxylic acid copolymer (BYK P-104) exhibited the optimum performance with the lowest MWCNT slurry viscosity in texanol. The cutting and dispersion efficiencies of MWCNTs with 20 wt.% of BYK P-104 dispersant were compared using conventional ball milling and high energy milling, whereby the latter was found to be more effective. High energy milling for 2 h produced a large portion of MWCNT agglomerates smaller than 150 nm, showing a drastic increase in slurry viscosity due to the dispersion into individual CNTs. On the other hand, 120 h ball milling was required to achieve the agglomerate size of 300 nm with less viscosity increase upon milling. Decrease in the degree of MWCNT crystallinity was observed by both milling, even though 2 h high energy milling showed slightly less damage than 120 h ball milling based on XRD and Raman spectroscopy results.

Milling damage on Carbon Fibre Reinforced Polymer using TiAlN coated End mills

International Nuclear Information System (INIS)

Konneh, Mohamed; Kassim, Abdullah Abdul Rahman; Izman, Sudin

2015-01-01

This paper reports on the damage caused by milling Carbon Fibre Reinforced Composite (CFRP) with 2-flute 4 mm-diameter solid carbide end mills, coated with titanium aluminium nitride. The machining parameters considered in work are, rotation speed, feed rate and depth of cut. Experiments were designed based on Box-Behnken design and the experiments conducted on a Mikrotool DT-110 CNC micro machine. A laser tachometer was used to ascertain a rotational speed for conducting any machining trial. Optical microscopy examination reveals minimum delamination value of 4.05 mm at the spindle speed of 25,000 rpm, depth of cut of 50μm and feed rate of 3 mm/min and the maximum delamination value of 5.04 mm at the spindle speed of 35000 rpm, depth of cut of 150μm and feed rate of 9 mm/min A mathematical model relating the milling parameters and delamination has been established. (paper)

Milling damage on Carbon Fibre Reinforced Polymer using TiAlN coated End mills

Science.gov (United States)

Konneh, Mohamed; Izman, Sudin; Rahman Kassim, Abdullah Abdul

2015-07-01

This paper reports on the damage caused by milling Carbon Fibre Reinforced Composite (CFRP) with 2-flute 4 mm-diameter solid carbide end mills, coated with titanium aluminium nitride. The machining parameters considered in work are, rotation speed, feed rate and depth of cut. Experiments were designed based on Box-Behnken design and the experiments conducted on a Mikrotool DT-110 CNC micro machine. A laser tachometer was used to ascertain a rotational speed for conducting any machining trial. Optical microscopy examination reveals minimum delamination value of 4.05 mm at the spindle speed of 25,000 rpm, depth of cut of 50μm and feed rate of 3 mm/min and the maximum delamination value of 5.04 mm at the spindle speed of 35000 rpm, depth of cut of 150μm and feed rate of 9 mm/min A mathematical model relating the milling parameters and delamination has been established.

Sugars as tobacco ingredient: Effects on mainstream smoke composition.

Science.gov (United States)

Talhout, Reinskje; Opperhuizen, Antoon; van Amsterdam, Jan G C

2006-11-01

Sugars are natural tobacco components, and are also frequently added to tobacco during the manufacturing process. This review describes the fate of sugars during tobacco smoking, in particular the effect of tobacco sugars on mainstream smoke composition. In natural tobacco, sugars can be present in levels up to 20 wt%. In addition, various sugars are added in tobacco manufacturing in amounts up to 4 wt% per sugar. The added sugars are usually reported to serve as flavour/casing and humectant. However, sugars also promote tobacco smoking, because they generate acids that neutralize the harsh taste and throat impact of tobacco smoke. Moreover, the sweet taste and the agreeable smell of caramelized sugar flavors are appreciated in particular by starting adolescent smokers. Finally, sugars generate acetaldehyde, which has addictive properties and acts synergistically with nicotine in rodents. Apart from these consumption-enhancing pyrolysis products, many toxic (including carcinogenic) smoke compounds are generated from sugars. In particular, sugars increase the level of formaldehyde, acetaldehyde, acetone, acrolein, and 2-furfural in tobacco smoke. It is concluded that sugars in tobacco significantly contribute to the adverse health effects of tobacco smoking.

Monitoring Your Blood Sugar Level

Science.gov (United States)

... and NutritionHealth Insurance: Understanding What It CoversHigh Homocysteine Level: How It Affects Your Blood VesselsUnderstanding Your Medical ... Health Resources Healthcare Management Monitoring Your Blood Sugar Level Monitoring Your Blood Sugar Level Share Print What ...

Nanograin formation in milled MoO3 powders

International Nuclear Information System (INIS)

Guerrero-Paz, J; Dorantes-Rosales, H; Aguilar-Martínez, J A; Garibay-Febles, V

2013-01-01

Powder of Molybdenum trioxide was milled for different times in horizontal ball mills. Such powder was characterized by TEM and XRD. Powder was rapidly de-agglomerated and fragmented up to attain nanoplates of two types, amorphous and crystalline. Finally, cold-welding of nanoplates occurred permitting some relaxation process to obtain a more stable energized structure consisting of equiaxial crystalline nanograins after 16 hours of milling.

40 CFR 63.1347 - Standards for raw and finish mills.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 11 2010-07-01 2010-07-01 true Standards for raw and finish mills. 63... and Operating Limits § 63.1347 Standards for raw and finish mills. The owner or operator of each new or existing raw mill or finish mill at a facility which is a major source subject to the provisions...

Combination of sugar analysis and stable isotope ratio mass spectrometry to detect the use of artificial sugars in royal jelly production.

Science.gov (United States)

Wytrychowski, Marine; Daniele, Gaëlle; Casabianca, Hervé

2012-05-01

The effects of feeding bees artificial sugars and/or proteins on the sugar compositions and (13)C isotopic measurements of royal jellies (RJs) were evaluated. The sugars fed to the bees were two C4 sugars (cane sugar and maize hydrolysate), two C3 sugars (sugar beet, cereal starch hydrolysate), and honey. The proteins fed to them were pollen, soybean, and yeast powder proteins. To evaluate the influence of the sugar and/or protein feeding over time, samples were collected during six consecutive harvests. (13)C isotopic ratio measurements of natural RJs gave values of around -25 ‰, which were also seen for RJs obtained when the bees were fed honey or C3 sugars. However, the RJs obtained when the bees were fed cane sugar or corn hydrolysate (regardless of whether they were also fed proteins) gave values of up to -17 ‰. Sugar content analysis revealed that the composition of maltose, maltotriose, sucrose, and erlose varied significantly over time in accordance with the composition of the syrup fed to the bees. When corn and cereal starch hydrolysates were fed to the bees, the maltose and maltotriose contents of the RJs increased up to 5.0 and 1.3 %, respectively, compared to the levels seen in authentic samples (i.e., samples obtained when the bees were fed natural food: honey and pollen) that were inferior to 0.2% and not detected, respectively. The sucrose and erlose contents of natural RJs were around 0.2 %, whereas those in RJs obtained when the bees were fed cane or beet sugar were as much as 4.0 and 1.3 %, respectively. The combination of sugar analysis and (13)C isotopic ratio measurements represents a very efficient analytical methodology for detecting (from early harvests onward) the use of C4 and C3 artificial sugars in the production of RJ.

A Mathematical Model for Simultaneous Saccharification and Co-fermentation (SSCF) of C6 and C5 Sugars

DEFF Research Database (Denmark)

Morales Rodriguez, Ricardo; Gernaey, Krist; Meyer, Anne S.

2011-01-01

saccharification and co-fermentation (SSCF) of C6 and C5 sugars. The model is constructed by combining existing mathematical models for enzymatic hydrolysis and co-fermentation. An inhibition of ethanol on cellulose conversion is introduced in order to increase the reliability. The mathematical model for the SSCF...... is verified by comparing the model predictions with experimental data obtained from the ethanol production based on kraft paper mill sludge. When fitting the model to the data, only the yield coefficients for glucose and xylose metabolism were fine-tuned, which were found to be 0.43 g·g−1 (ethanol....../glucose) and 0.35 g·g−1 (ethanol/xylose) respectively. These promising validation results encourage further model application to evaluate different process configurations for lignocellulosic bioethanol technology....

Effect of electron radiation on sugar content in inverted liquid sugar

International Nuclear Information System (INIS)

Podadera, P.; Sabato, S.F.

2009-01-01

Inverted liquid sugar is a mixture of sucrose, glucose and fructose, which shows its relevant characteristic on high sweetness power. Ionizing radiation has been applied to different kind of food and ingredients for different reasons, such as pathogens reduction, disinfestations, quarantine purposes, ripening delay among others. Radiation from an electron beam can be utilized as a technique to treat this ingredient because it can process a great volume of material per unit of time. The main goal of this paper was to verify the effect of radiation on the properties of inverted liquid sugar. This ingredient was irradiated in an electron accelerator (Radiation Dynamics) at a dose ranging from 5 to 50 kGy. Sucrose content measurements were reduced by 23% at 30 kGy when compared to control and the reduced sugar content increased around 11%. Density and moisture values were not affected by radiation. The total soluble solids (Brix degrees) rose in function of the absorbed dose. (authors)

Peculiarities of binding composition production in vortex jet mill

Science.gov (United States)

Zagorodnyuk, L. Kh; Lesovik, V. S.; Sumskoy, D. A.; Elistratkin, M. Yu; Makhortov, D. S.

2018-03-01

The article investigates the disintegration of perlite production waste in a vortex jet mill; the regularities of milling were established. Binding compositions were obtained at different ratios of cement vs. perlite sand production waste in the vortex jet mill in various milling regimes. The peculiarities of milling processes were studied, and technological and physicomechanical properties of the binding compositions were determined as well. The microstructure of the cement stones made of activated Portland cement and binding compositions in the vortex jet mill was elucidated by electron microscopy. The open pores of the cement-binding compositions prepared using perlite fillers were found to be filled by newgrowths at different stages of collective growth. The microstructure of the binding compositions is dense due to rationally proportioned composition, effective mineral filler— perlite waste — that creates additional substrates for internal composite microstructure formation, mechanochemical activation of raw mixture, which allows obtaining composites with required properties.

Modeling the milling tool wear by using an evolutionary SVM-based model from milling runs experimental data

Science.gov (United States)

Nieto, Paulino José García; García-Gonzalo, Esperanza; Vilán, José Antonio Vilán; Robleda, Abraham Segade

2015-12-01

The main aim of this research work is to build a new practical hybrid regression model to predict the milling tool wear in a regular cut as well as entry cut and exit cut of a milling tool. The model was based on Particle Swarm Optimization (PSO) in combination with support vector machines (SVMs). This optimization mechanism involved kernel parameter setting in the SVM training procedure, which significantly influences the regression accuracy. Bearing this in mind, a PSO-SVM-based model, which is based on the statistical learning theory, was successfully used here to predict the milling tool flank wear (output variable) as a function of the following input variables: the time duration of experiment, depth of cut, feed, type of material, etc. To accomplish the objective of this study, the experimental dataset represents experiments from runs on a milling machine under various operating conditions. In this way, data sampled by three different types of sensors (acoustic emission sensor, vibration sensor and current sensor) were acquired at several positions. A second aim is to determine the factors with the greatest bearing on the milling tool flank wear with a view to proposing milling machine's improvements. Firstly, this hybrid PSO-SVM-based regression model captures the main perception of statistical learning theory in order to obtain a good prediction of the dependence among the flank wear (output variable) and input variables (time, depth of cut, feed, etc.). Indeed, regression with optimal hyperparameters was performed and a determination coefficient of 0.95 was obtained. The agreement of this model with experimental data confirmed its good performance. Secondly, the main advantages of this PSO-SVM-based model are its capacity to produce a simple, easy-to-interpret model, its ability to estimate the contributions of the input variables, and its computational efficiency. Finally, the main conclusions of this study are exposed.

Fermentation of sugar-beet molasses

Energy Technology Data Exchange (ETDEWEB)

Malchenko, A L; Krishtul, F B

1956-08-25

Sugar-beet molasses is fermented with yeast separated from the mash, sterilized, and reactivated. To reduce sugar losses and hasten fermentation, the yeast is removed from the mash as the cells fall to the bottom during the fermentation process.

Effect of commonly consumed sugar containing and sugar free fruit drinks on the hydrogen ion modulation of human dental plaque

Directory of Open Access Journals (Sweden)

Nanika Mahajan

2014-01-01

Full Text Available Background: With the increased awareness of healthy diet among the population, the intake of fruit juices as health drinks has been increased. This study has been designed to check the potential cariogenicity of fruit drinks frequently consumed by infants and young children. Aim: To compare the acidogenic potential of sugar free fruit juices with fruit juices containing sugar by evaluating the plaque pH changes, following consumption of the above drinks. Design: The study was carried out on 10 children in the age group of 8-15 years. The four fruit juices used were 1 orange juice with added sugar 2 orange juice with no added sugar 3 apple juice with added sugar 4 apple juice with no added sugar. Sucrose rinse of 10% was used as control group. The endogenous pH of the fruit juices and control was assessed using digital pH meter. The plaque pH was assessed at the baseline and after the consumption of the drinks at 5, 10, 20, 30, 40, and 60 minutes time interval using the plaque-harvesting technique. The obtained results were compiled and subjected to statistical analysis using paired t-test. Result: All the fruit juices showed drop in plaque pH. A drop in pH was also observed in the juices despite of no added sugar content. Conclusion: The fruit juices labeled with "no added sugar" or "free from added sugar", contained substantial quantities of sugar and are equally cariogenic as are fruit drinks with added sugar.

SILAGE CANE SUGAR ADDED WITH DRIED BREWER

Directory of Open Access Journals (Sweden)

W. J. R. Castro

2015-02-01

Full Text Available The objective of this experiment was to evaluate the fermentative parameters and chemical composition of silage cane sugar added with residue dried brewery. The experimental design was completely randomized with four treatments and four replications: 100% cane sugar; 90% of cane sugar + 10% residue dried brewer; 80% of cane sugar + 20% residue dried brewer and 70% cane sugar + 30% dried brewer based on natural matter, composed silages. The sugar cane was chopped in a stationary machine with forage particle size of approximately 2 cm, and homogenized manually with the additives. For storage chopped fresh weight were used in experimental silos capacity of about 4 liters. The results showed that the contents of dry matter and crude protein showed positive linear (P0.05 with mean value of 3.81, while for ether extract and ash results were positive linear (P0.05 for N ammonia presented average value of 4.18. It is concluded that the addition of brewer dehydrated improves the fermentation process of silage cane sugar, in addition to improving their nutritional characteristics.

77 FR 43369 - Alumax Mill Products, Inc. Doing Business as Alcoa Mill Products Texarkana a Subsidiary of Alcoa...

Science.gov (United States)

2012-07-24

... Products, Inc., a subsidiary of Alcoa, Inc. The intent of the Department's certification is to properly... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-71,149] Alumax Mill Products, Inc. Doing Business as Alcoa Mill Products Texarkana a Subsidiary of Alcoa, Inc. Nash, TX; Amended...

Manage your blood sugar (image)

Science.gov (United States)

Checking your blood sugar levels often and writing down the results will tell you how well you are managing your diabetes so you ... possible. The best times to check your blood sugar are before meals and at bedtime. Your blood ...

pH Regulation of Electrogenic Sugar/H+ Symport in MFS Sugar Permeases

Science.gov (United States)

Bazzone, Andre; Madej, M. Gregor; Kaback, H. Ronald

2016-01-01

Bacterial sugar symporters in the Major Facilitator Superfamily (MFS) use the H+ (and in a few cases Na+) electrochemical gradients to achieve active transport of sugar into the cell. Because a number of structures of MFS sugar symporters have been solved recently, molecular insight into the transport mechanism is possible from detailed functional analysis. We present here a comparative electrophysiological study of the lactose permease (LacY), the fucose permease (FucP) and the xylose permease (XylE), which reveals common mechanistic principles and differences. In all three symporters energetically downhill electrogenic sugar/H+ symport is observed. Comparison of the pH dependence of symport at symmetrical pH exhibits broad bell-shaped pH profiles extending over 3 to 6 pH units and a decrease at extremely alkaline pH ≥ 9.4 and at acidic to neutral pH = 4.6–7.5. The pH dependence can be described by an acidic to neutral apparent pK (pKapp) and an alkaline pKapp. Experimental evidence suggests that the alkaline pKapp is due to H+ depletion at the protonation site, while the acidic pKapp is due to inhibition of deprotonation. Since previous studies suggest that a single carboxyl group in LacY (Glu325) may be the only side chain directly involved in H+ translocation and a carboxyl side chain with similar properties has been identified in FucP (Asp46) and XylE (Asp27), the present results imply that the pK of this residue is switched during H+/sugar symport in all three symporters. PMID:27227677

Are restrictive guidelines for added sugars science based?

Science.gov (United States)

Erickson, Jennifer; Slavin, Joanne

2015-12-12

Added sugar regulations and recommendations have been proposed by policy makers around the world. With no universal definition, limited access to added sugar values in food products and no analytical difference from intrinsic sugars, added sugar recommendations present a unique challenge. Average added sugar intake by American adults is approximately 13% of total energy intake, and recommendations have been made as low 5% of total energy intake. In addition to public health recommendations, the Food and Drug Administration has proposed the inclusion of added sugar data to the Nutrition and Supplemental Facts Panel. The adoption of such regulations would have implications for both consumers as well as the food industry. There are certainly advantages to including added sugar data to the Nutrition Facts Panel; however, consumer research does not consistently show the addition of this information to improve consumer knowledge. With excess calorie consumption resulting in weight gain and increased risk of obesity and obesity related co-morbidities, added sugar consumption should be minimized. However, there is currently no evidence stating that added sugar is more harmful than excess calories from any other food source. The addition of restrictive added sugar recommendations may not be the most effective intervention in the treatment and prevention of obesity and other health concerns.

Co-generation and thermometrical power generation feasibility and perspectives for the sugar-alcohol sector; Viabilidade e perspectivas da cogeracao e da geracao termoeletrica junto ao setor sucro-alcooleiro

Energy Technology Data Exchange (ETDEWEB)

Walter, Arnaldo Cesar da Silva

1994-11-01

This work deals with cogeneration and independent power production and, more specifically, with the feasibility and perspectives of these technologies in the Brazilian sugar-cane industry. In the first part of thesis, cogeneration and independent power production are assessed as decentralised power generation options. Some aspects of these technologies are identified, as the conditions in which they have developed in recent years, world-wide, and how they have been dealt with in the institutional structural changes under way in the public owned electric power sector in several countries. In the second part, the Brazilian sector and the sugar-cane industry are evaluated. The organisational structure of the electric power sector, the reasons of its institutional and financial crises and some structural changes proposals are discussed. In the other hand, the sugar-cane industry is studied according to the following aspects: its expansion in recent years, the concentration of the production, the alcohol production costs and why some degree of production diversification in this industrial branch is desirable. Several technological alternatives that allow a large scale electricity production in the sugar and alcohol sector are examined in the final part of this thesis. A simulation procedure was specially developed in this thesis and applied to a typical sugar and alcohol plant. With the help of this simulation procedure, technical and economic evaluations were carried out and the best alternatives are identified. Finally, their potential was calculated for the sugar-cane industry in the State of Sao Paulo, considering the possible expansion of the sugar and alcohol production and the mills that are amore appropriate to respond for this increase. The large scale electric power generation from sugar-cane by-products is an option that can bring about some advantages for the public owned electric power sector, as well for the sugar-cane one. As a matter of fact, looking

21 CFR 184.1857 - Corn sugar.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Corn sugar. 184.1857 Section 184.1857 Food and... Substances Affirmed as GRAS § 184.1857 Corn sugar. (a) Corn sugar (C6H12O6, CAS Reg. No. 50-99-7), commonly... monohydrate form and is produced by the complete hydrolysis of corn starch with safe and suitable acids or...

Cross-sectional survey of the amount of free sugars and calories in carbonated sugar-sweetened beverages on sale in the UK

Science.gov (United States)

Hashem, Kawther M; He, Feng J; Jenner, Katharine H; MacGregor, Graham A

2016-01-01

Objectives To investigate the free sugars and calorie content of carbonated sugar-sweetened beverages (CSSB) available in the main UK supermarkets. Study design We carried out a cross-sectional survey in 2014 of 169 CSSB. Methods The free sugars (sugars g/100 mL) and calorie (kcal/100 mL) were collected from product packaging and nutrient information panels of CSSB available in 9 main UK supermarkets. Results The average free sugars content in CSSB was 30.1±10.7 g/330 mL, and 91% of CSSB would receive a ‘red’ (high) label for sugars per serving. There was a large variation in sugars content between different flavours of CSSB and within the same type of flavour ranging from 3.3 to 52.8 g/330 mL. On average, ginger beer (38.5±9.9 g/330 mL) contained the highest amounts of sugars and ginger ale (22.9±7.7 g/330 mL) contained the lowest. Cola flavour is the most popular flavour in the UK with an average free sugars content of 35.0±1.1 g/330 mL. On average, the supermarket own brand contained lower levels of sugars than branded products (27.9±10.6 vs 31.6±10.6 g/330 mL, p=0.02). The average calorie content in CSSB was 126.1±43.5 kcal/330 mL. Cola flavour had a calorie content of 143.5±5.2 kcal/330 mL. Among the 169 products surveyed, 55% exceeded the maximum daily recommendation for free sugars intake (30 g) per 330 mL. Conclusions Free sugars content of CSSB in the UK is high and is a major contributor to free sugars intake. There is a wide variation in the sugars content of CSSB and even within the same flavour of CSSB. These findings demonstrate that the amount of free sugars added to CSSB can be reduced without technical issues, and there is an urgent need to set incremental free sugars reduction targets. A reduction in sugars content and overall CSSB consumption will be very beneficial in reducing obesity, type 2 diabetes and dental caries. PMID:28186923

Optimizing peracetic acid pretreatment conditions for improved simultaneous saccharification and co-fermentation (SSCF) of sugar cane bagasse to ethanol fuel

Energy Technology Data Exchange (ETDEWEB)

Teixeira, Lincoln C. [Fundacao Centro Tecnologico de Minas Gerais, Setor de Biotecnologia e Tecnologia Quimica, Minas Geraid (Brazil); Linden, James C.; Schroeder, Herbert A. [Colorado State Univ., Dept. of Chemical and Bioresource Engineering, Fort Collins, CO (United States)

1999-01-01

The use of several lignocellulosic materials for ethanol fuel production has been studied exhaustively in the U.S.A. Strong environmental legislation has been driving efforts by enterprise, state agencies, and universities to make ethanol from biomass economically viable. Production costs for ethanol from biomass have been decreasing year by year as a consequence of this massive effort. Pretreatment, enzyme recovery, and development of efficient microorganisms are some promising areas of study for reducing process costs. Sugar cane bagasse constitutes the most important lignocellulosic material to be considered in Brazil as new technology such as the production of ethanol fuel. At present, most bagasse is burned, and because of its moisture content, has a low value fuel. Ethanol production would result in a value-added product. The bagasse is available at the sugar mill site at no additional cost because harvesting, transportation and storage costs are borne by the sugar production. The present paper presents an alternative pretreatment with low energy input where biomass is treated in a silo type system without need for expensive capitalisation. Experimentally, ground sugar cane bagasse is placed in plastic bags and a peracetic acid solution is added to the biomass at concetrations of 0, 6, 9, 15, 21, 30 and 60% w/w of peracetic acid based on over dried biomass. The ratio of solution to wood is 6:1; a seven day storage period had been used. Tests using hydrolysing enzymes as an indicator for SSCF have been performed to evaluated the pretreatment efficiency. As an auxiliary method, a series of pre-pretreatments using stoichiometric amounts of sodium hydroxide and ammonium hydroxide based on 4-methyl-glucuronic acid and acetate content in the sugar cane bagasse have been performed before addition of peracetic acid. The alkaline solutions are added to the raw bagasse in a ratio of 17:1 solution to biomass and mixed for 24 hours at room temperature. Biomass is filled

46 CFR 50.25-3 - Manufacturer or mill certification.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Manufacturer or mill certification. 50.25-3 Section 50... PROVISIONS Acceptance of Material and Piping Components § 50.25-3 Manufacturer or mill certification. (a) A manufacturer or mill producing materials used in certain products for installation on inspected vessels, shall...

USE CELLULOSE FOR CLEANING CONCENTRATED SUGAR SOLUTIONS

Directory of Open Access Journals (Sweden)

N. G. Kul’neva

2015-01-01

Full Text Available Summary. Producing high quality intermediate products in the boiling-crystallization station is an actual problem of sugar production. In the production of white sugar brown sugar syrup is not further purified that decreases the quality of the end product. Studies have been conducted using cellulose as an adsorbent for the purification of concentrated sugar solutions, having affinity to dyes and other impurities. Research have been carried out with the intermediate products of the Lebedyan sugar plant. Test results have shown cellulose ability to adsorb the dyes in sugar production. The influence of the adsorbent concentration and the mass fraction of solids in the syrup on the decolorization effect has been studied; rational process parameters have been obtained. It has been found that proceeding an additional adsorption purification of brown sugars syrup allows to reduce the solution color, increase the amount and quality of the end product. Adsorbing means, received from production wastes on the basis of organic resources, have many advantages: economical, environmentally friendly for disposal, safe to use, reliable and efficient in use. Conducted research on using cellulose as adsorbent for treatment of concentrated sugar solutions, having an affinity for colouring matter and other impurities. The experiments were carried out on the intermediates Lebedyanskiy sugar factory. The test results showed the ability of cellulose to adsorb coloring matter of sugar production. To evaluate the effect of bleaching depending on the mass fraction of dry substances prepared yellow juice filtration of sugar concentration of 55, 60, 65 % with subsequent adsorption purification of cellulose. The results of the experiment built adsorption isotherm of dyestuffs. The influence of the concentration of the adsorbent and a mass fraction of solids of juice filtration on the efficiency of decolorization obtained by rational parameters of the process. It is

Radiation health and safety aspects in uranium milling

International Nuclear Information System (INIS)

Smart, B.C.

1982-01-01

This presentation deals mainly with radiation levels associated with the uranium milling operations, including yellowcake production. The regulation of uranium mills has not received much attention in the past because radiation levels have been generally low, and uranium milling has been substantially free of occupational illness. More attention is being directed towards minimizing exposures, and the Canadian Atomic Energy Control Board is working on new regulations which will reflect the recommendations of various hearings and the International Commission on Radiological Protection. Emphasis is now being placed on improving monitoring methods. At the beginning of 1982 a gamma dosimetry program will be put into effect for all uranium mine and mill workers. An improved method is also being sought to determine radon daughter exposures more accurately. It is expected that a better knowledge of monitoring and assessing thoron daughter levels in mine and mill facilities will be obtained soon. This radiation contribution will be included when calculating a combined radiation exposure factor for individual workers. Programs are underway to better monitor and assess uranium dust inhalation. Initial studies indicate that the present precautions taken to avoid dust inhalation at the mills are effective. A more complete study will be undertaken in 1982

Sugar and hexokinase suppress expression of PIP aquaporins and reduce leaf hydraulics that preserves leaf water potential.

Science.gov (United States)

Kelly, Gilor; Sade, Nir; Doron-Faigenboim, Adi; Lerner, Stephen; Shatil-Cohen, Arava; Yeselson, Yelena; Egbaria, Aiman; Kottapalli, Jayaram; Schaffer, Arthur A; Moshelion, Menachem; Granot, David

2017-07-01

Sugars affect central aspects of plant physiology, including photosynthesis, stomatal behavior and the loss of water through the stomata. Yet, the potential effects of sugars on plant aquaporins (AQPs) and water conductance have not been examined. We used database and transcriptional analyses, as well as cellular and whole-plant functional techniques to examine the link between sugar-related genes and AQPs. Database analyses revealed a high level of correlation between the expression of AQPs and that of sugar-related genes, including the Arabidopsis hexokinases 1 (AtHXK1). Increased expression of AtHXK1, as well as the addition of its primary substrate, glucose (Glc), repressed the expression of 10 AQPs from the plasma membrane-intrinsic proteins (PIP) subfamily (PIP-AQPs) and induced the expression of two stress-related PIP-AQPs. The osmotic water permeability of mesophyll protoplasts of AtHXK1-expressing plants and the leaf hydraulic conductance of those plants were significantly reduced, in line with the decreased expression of PIP-AQPs. Conversely, hxk1 mutants demonstrated a higher level of hydraulic conductance, with increased water potential in their leaves. In addition, the presence of Glc reduced leaf water potential, as compared with an osmotic control, indicating that Glc reduces the movement of water from the xylem into the mesophyll. The production of sugars entails a significant loss of water and these results suggest that sugars and AtHXK1 affect the expression of AQP genes and reduce leaf water conductance, to coordinate sugar levels with the loss of water through transpiration. © 2017 The Authors The Plant Journal © 2017 John Wiley & Sons Ltd.

Determination of the Tapping Part Diameter of the Thread Mill

Directory of Open Access Journals (Sweden)

A. E. Dreval'

2015-01-01

Full Text Available Currently, there is a tendency to increase the proportion of thread milling operations, among other ways of tapping, which is associated with increasing number of CNC machines, flexibility and versatility of the process.Developments presently existing in the RF and used in the thread mills deal, mainly, with the thread milling cutter designs, to process internal and external thread with straight flutes made from high-speed steel.The paper presents a technique to calculate and select the initial design parameters, i.e. the external diameter of the tapping part of thread milling cutter, which is chosen as a basic computational design. The analysis of directories of tool companies containing foreign de-signs of solid thread end-milling cutters has shown that most of them rep-resent the thread cutter designs made of solid carbide. There are solid and interlocking side milling cutters, which use a tapping part both as a single-disk and as a multi-disk one; chip flutes are made to be both as direct and as screw; solid designs of cutters are made from carbide with a diameter of up to 20 ... 25 mm; thread cutters can be left- and right-hand cutting; Designs of the combined thread mills are proposed; internal channels are used for coolant supply.It is shown that the purpose of the external diameter of the tapping part of the thread mill should take into account the effect of the thread mill diameter on the milling process performance, precision of thread profile received, taper thread, tool strength, and the volume of flutes.The analysis has shown that when choosing the external diameter of the thread mill it worth taking its maximum diameter to improve the char-acteristics of the process under the restrictions imposed on the accuracy of the formed thread.

Radiological health aspects of uranium milling

International Nuclear Information System (INIS)

Fisher, D.R.; Stoetzel, G.A.

1983-05-01

This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized

Radiological health aspects of uranium milling

Energy Technology Data Exchange (ETDEWEB)

Fisher, D.R.; Stoetzel, G.A.

1983-05-01

This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized.

THE FACTORS FORMING QUALITY OF GRANULATED SUGAR

Directory of Open Access Journals (Sweden)

N. G. Kulneva

2015-01-01

Full Text Available Sugar, with good taste and high caloric, is one of the most popular human food. Consumers sugar must be sure that the sugar under normal conditions of use is of high quality and is not harmful to the health of the product. One reason for the decline in the quality of sugar is bacterial contamination. This is because the sugar industry products are good targets for the development of different groups of microorganisms, e.g., Bacillus subtilis, Clostridium perfringes, Leuconostoc dextranicum, Torula alba, Pseudomonas fluorescens, Sarcina lutea and others. These organisms are affected with beets, and then with sugar beet chips and diffusion juice fall into the processing line of sugar production. Their number in the diffusion juice varies and depends on many facto rs such as the quality of raw materials, the quality of cleaning beet root colonization of transporter-washing and the supply of water to the diffusion process, the temperature of the diffusion and others. In the diffusion unit has the most favorable conditions for the development of micro-organisms. Some of them, especially resistant bacteria and thermophilic bacteria or their spores, forming a capsule which protects against external influences occur in the final product sugar. When injected into the fresh crop of product (juice, syrup, they begin to multiply rapidly, causing difficulties in the process. The higher seeding beet microorganisms, the more they decompose and emit sucrose metabolism byproducts. To reduce the negative impact of microbiological and reduce losses from decomposition of sucrose conducted research on the possibility of using chlorine-containing substances in the sugar industry. It was established experimentally that the investigated chlorinated drug has bacteriostatic action and can be recommended for use in sugar beet production.

Preparation of iron sulphides by high energy ball milling

DEFF Research Database (Denmark)

Lin, R.; Jiang, Jianzhong; Larsen, R.K.

1998-01-01

The reaction of a powder mixture consisting of 50 a.% Fe and 50 a.% S during high energy ball milling has been studied by x-ray diffraction and Mossbauer spectroscopy. After around 19 h of milling FeS2 and FeS havebeen formed. By further milling the FeS compound becomes dominating and only Fe......S with an average crystallite size of about 10 nm was observed after milling times longer than 67 h. Mossbauer spectra obtained with applied fields show that the particles are antiferromagnetic or have a strongly canted spin structure....

Simultaneous Detection of c-Fos Activation from Mesolimbic and Mesocortical Dopamine Reward Sites Following Naive Sugar and Fat Ingestion in Rats.

Science.gov (United States)

Dela Cruz, Julie A D; Coke, Tricia; Bodnar, Richard J

2016-08-24

This study uses cellular c-fos activation to assess effects of novel ingestion of fat and sugar on brain dopamine (DA) pathways in rats. Intakes of sugars and fats are mediated by their innate attractions as well as learned preferences. Brain dopamine, especially meso-limbic and meso-cortical projections from the ventral tegmental area (VTA), has been implicated in both of these unlearned and learned responses. The concept of distributed brain networks, wherein several sites and transmitter/peptide systems interact, has been proposed to mediate palatable food intake, but there is limited evidence empirically demonstrating such actions. Thus, sugar intake elicits DA release and increases c-fos-like immunoreactivity (FLI) from individual VTA DA projection zones including the nucleus accumbens (NAC), amygdala (AMY) and medial prefrontal cortex (mPFC) as well as the dorsal striatum. Further, central administration of selective DA receptor antagonists into these sites differentially reduce acquisition and expression of conditioned flavor preferences elicited by sugars or fats. One approach by which to determine whether these sites interacted as a distributed brain network in response to sugar or fat intake would be to simultaneous evaluate whether the VTA and its major mesotelencephalic DA projection zones (prelimbic and infralimbic mPFC, core and shell of the NAc, basolateral and central-cortico-medial AMY) as well as the dorsal striatum would display coordinated and simultaneous FLI activation after oral, unconditioned intake of corn oil (3.5%), glucose (8%), fructose (8%) and saccharin (0.2%) solutions. This approach is a successful first step in identifying the feasibility of using cellular c-fos activation simultaneously across relevant brain sites to study reward-related learning in ingestion of palatable food in rodents.

Taxation of unprocessed sugar or sugar-added foods for reducing their consumption and preventing obesity or other adverse health outcomes: Protocol

OpenAIRE

Pfinder, Manuela; Katikireddi, Srinivasa V.; Pega, Frank; Gartlehner, Gerald; Fenton, Candida; Griebler, Ursula; Sommer, Isolde; Heise, Thomas L.; Lhachimi, Stefan K.

2016-01-01

To assess the effects of taxation of unprocessed sugar or sugar-added foods in the general population on the:\\ud \\ud consumption of unprocessed sugar or sugar-added foods;\\ud prevalence and incidence of overweight and obesity; and\\ud prevalence and incidence of diet-related health conditions.

7 CFR 58.419 - Curd mill and miscellaneous equipment.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Curd mill and miscellaneous equipment. 58.419 Section... Service 1 Equipment and Utensils § 58.419 Curd mill and miscellaneous equipment. Knives, hand rakes... of the curd mill should be of stainless steel. All pieces of equipment shall be so constructed that...

Development of an electromechanical principle for wet and dry milling

Science.gov (United States)

Halbedel, Bernd; Kazak, Oleg

2018-05-01

The paper presents a novel electromechanical principle for wet and dry milling of different materials, in which the milling beads are moved under a time- and local-variable magnetic field. A possibility to optimize the milling process in such a milling machine by simulation of the vector gradient distribution of the electromagnetic field in the process room is presented. The mathematical model and simulation methods based on standard software packages are worked out. The results of numerical simulations and experimental measurements of the electromagnetic field in the working chamber of a developed and manufactured laboratory plant correlate well with each other. Using the obtained operating parameters, dry milling experiments with crushed cement clinker and wet milling experiments of organic agents in the laboratory plant are performed and the results are discussed here.

Activity of Plodia interpunctella (Lepidoptera: Pyralidae) in and around flour mills.

Science.gov (United States)

Doud, C W; Phillips, T W

2000-12-01

Studies were conducted at two flour mills where male Indian meal moths, Plodia interpunctella (Hübner), were captured using pheromone-baited traps. Objectives were to determine the distribution of male P. interpunctella at different locations in and around the mills throughout the season, and to monitor moth activity before and after one of the mills was fumigated with methyl bromide to assess efficacy of treatment. Commercially available sticky traps baited with the P. interpunctella sex pheromone were placed at various locations outside and within the larger of the two mills (mill 1). Moths were captured inside mill 1 after methyl bromide fumigations. The highest numbers of P. interpunctella were caught outside the facility and at ground floor locations near outside openings. Additional traps placed in the rooms above the concrete stored-wheat silos at mill 1 during the second year captured more moths than did traps within the mill's production and warehouse areas. In another study, moths were trapped at various distances from a smaller flour mill (mill 2) to determine the distribution of moths outdoors relative to the mill. There was a negative correlation between moth capture and distance from the facility, which suggested that moth activity was concentrated at or near the flour mill. The effectiveness of the methyl bromide fumigations in suppressing moth populations could not be assessed with certainty because moths captured after fumigation may have immigrated from outside through opened loading bay warehouse doors. This study documents high levels of P. interpunctella outdoors relative to those recorded inside a food processing facility. Potential for immigration of P. interpunctella into flour mills and other stored product facilities from other sources may be greater than previously recognized. Moth entry into a food processing facility after fumigation is a problem that should be addressed by pest managers.

33 CFR 117.225 - Yellow Mill Channel.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Yellow Mill Channel. 117.225 Section 117.225 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Connecticut § 117.225 Yellow Mill Channel. The...

Coal Moisture Estimation in Power Plant Mills

DEFF Research Database (Denmark)

Andersen, Palle; Bendtsen, Jan Dimon; Pedersen, Tom S.

2009-01-01

Knowledge of moisture content in raw coal feed to a power plant coal mill is of importance for efficient operation of the mill. The moisture is commonly measured approximately once a day using offline chemical analysis methods; however, it would be advantageous for the dynamic operation...... of the plant if an on-line estimate were available. In this paper we such propose an on-line estimator (an extended Kalman filter) that uses only existing measurements. The scheme is tested on actual coal mill data collected during a one-month operating period, and it is found that the daily measured moisture...

Estimating Free and Added Sugar Intakes in New Zealand

Directory of Open Access Journals (Sweden)

Rachael Kibblewhite

2017-11-01

Full Text Available The reduction of free or added sugar intake (sugars added to food and drinks as a sweetener is almost universally recommended to reduce the risk of obesity-related diseases and dental caries. The World Health Organisation recommends intakes of free sugars of less than 10% of energy intake. However, estimating and monitoring intakes at the population level is challenging because free sugars cannot be analytically distinguished from naturally occurring sugars and most national food composition databases do not include data on free or added sugars. We developed free and added sugar estimates for the New Zealand (NZ food composition database (FOODfiles 2010 by adapting a method developed for Australia. We reanalyzed the 24 h recall dietary data collected for 4721 adults aged 15 years and over participating in the nationally representative 2008/09 New Zealand Adult Nutrition Survey to estimate free and added sugar intakes. The median estimated intake of free and added sugars was 57 and 49 g/day respectively and 42% of adults consumed less than 10% of their energy intake from free sugars. This approach provides more direct estimates of the free and added sugar contents of New Zealand foods than previously available and will enable monitoring of adherence to free sugar intake guidelines in future.

Estimating Free and Added Sugar Intakes in New Zealand.

Science.gov (United States)

Kibblewhite, Rachael; Nettleton, Alice; McLean, Rachael; Haszard, Jillian; Fleming, Elizabeth; Kruimer, Devonia; Te Morenga, Lisa

2017-11-27

The reduction of free or added sugar intake (sugars added to food and drinks as a sweetener) is almost universally recommended to reduce the risk of obesity-related diseases and dental caries. The World Health Organisation recommends intakes of free sugars of less than 10% of energy intake. However, estimating and monitoring intakes at the population level is challenging because free sugars cannot be analytically distinguished from naturally occurring sugars and most national food composition databases do not include data on free or added sugars. We developed free and added sugar estimates for the New Zealand (NZ) food composition database (FOODfiles 2010) by adapting a method developed for Australia. We reanalyzed the 24 h recall dietary data collected for 4721 adults aged 15 years and over participating in the nationally representative 2008/09 New Zealand Adult Nutrition Survey to estimate free and added sugar intakes. The median estimated intake of free and added sugars was 57 and 49 g/day respectively and 42% of adults consumed less than 10% of their energy intake from free sugars. This approach provides more direct estimates of the free and added sugar contents of New Zealand foods than previously available and will enable monitoring of adherence to free sugar intake guidelines in future.

Estimating Free and Added Sugar Intakes in New Zealand

Science.gov (United States)

Kibblewhite, Rachael; Nettleton, Alice; McLean, Rachael; Haszard, Jillian; Fleming, Elizabeth; Kruimer, Devonia

2017-01-01

The reduction of free or added sugar intake (sugars added to food and drinks as a sweetener) is almost universally recommended to reduce the risk of obesity-related diseases and dental caries. The World Health Organisation recommends intakes of free sugars of less than 10% of energy intake. However, estimating and monitoring intakes at the population level is challenging because free sugars cannot be analytically distinguished from naturally occurring sugars and most national food composition databases do not include data on free or added sugars. We developed free and added sugar estimates for the New Zealand (NZ) food composition database (FOODfiles 2010) by adapting a method developed for Australia. We reanalyzed the 24 h recall dietary data collected for 4721 adults aged 15 years and over participating in the nationally representative 2008/09 New Zealand Adult Nutrition Survey to estimate free and added sugar intakes. The median estimated intake of free and added sugars was 57 and 49 g/day respectively and 42% of adults consumed less than 10% of their energy intake from free sugars. This approach provides more direct estimates of the free and added sugar contents of New Zealand foods than previously available and will enable monitoring of adherence to free sugar intake guidelines in future. PMID:29186927

Sugar Metabolism in Hummingbirds and Nectar Bats.

Science.gov (United States)

Suarez, Raul K; Welch, Kenneth C

2017-07-12

Hummingbirds and nectar bats coevolved with the plants they visit to feed on floral nectars rich in sugars. The extremely high metabolic costs imposed by small size and hovering flight in combination with reliance upon sugars as their main source of dietary calories resulted in convergent evolution of a suite of structural and functional traits. These allow high rates of aerobic energy metabolism in the flight muscles, fueled almost entirely by the oxidation of dietary sugars, during flight. High intestinal sucrase activities enable high rates of sucrose hydrolysis. Intestinal absorption of glucose and fructose occurs mainly through a paracellular pathway. In the fasted state, energy metabolism during flight relies on the oxidation of fat synthesized from previously-ingested sugar. During repeated bouts of hover-feeding, the enhanced digestive capacities, in combination with high capacities for sugar transport and oxidation in the flight muscles, allow the operation of the "sugar oxidation cascade", the pathway by which dietary sugars are directly oxidized by flight muscles during exercise. It is suggested that the potentially harmful effects of nectar diets are prevented by locomotory exercise, just as in human hunter-gatherers who consume large quantities of honey.

Sugar Metabolism in Hummingbirds and Nectar Bats

Directory of Open Access Journals (Sweden)

Raul K. Suarez

2017-07-01

Full Text Available Hummingbirds and nectar bats coevolved with the plants they visit to feed on floral nectars rich in sugars. The extremely high metabolic costs imposed by small size and hovering flight in combination with reliance upon sugars as their main source of dietary calories resulted in convergent evolution of a suite of structural and functional traits. These allow high rates of aerobic energy metabolism in the flight muscles, fueled almost entirely by the oxidation of dietary sugars, during flight. High intestinal sucrase activities enable high rates of sucrose hydrolysis. Intestinal absorption of glucose and fructose occurs mainly through a paracellular pathway. In the fasted state, energy metabolism during flight relies on the oxidation of fat synthesized from previously-ingested sugar. During repeated bouts of hover-feeding, the enhanced digestive capacities, in combination with high capacities for sugar transport and oxidation in the flight muscles, allow the operation of the “sugar oxidation cascade”, the pathway by which dietary sugars are directly oxidized by flight muscles during exercise. It is suggested that the potentially harmful effects of nectar diets are prevented by locomotory exercise, just as in human hunter-gatherers who consume large quantities of honey.

Root rot diseases of sugar beet

Directory of Open Access Journals (Sweden)

Jacobsen Barry J.

2006-01-01

Full Text Available Root rot diseases of sugar beet caused by Rhizoctonia solani (AG 2-2 IIIB and AG 2-2 IV, R. crocorum, Aphanomyces cochlioides, Phoma betae, Macrophomina phaeseolina, Fusarium oxysporum f.sp. radicis-betae, Pythium aphanidermatum Phytophthora drechsleri, Rhizopus stolonifer, R. arrhizus and Sclerotium rolfsii cause significant losses wherever sugar beets are grown. However, not all these soil-borne pathogens have been reported in all sugar beet production areas. Losses include reduced harvestable tonnage and reduced white sugar recovery. Many of these pathogens also cause post harvest losses in storage piles. Control for diseases caused by these pathogens include disease resistant cultivars, avoidance of stresses, cultural practices such as water management and the use of fungicides.

In vitro fermentation of olive oil mill wastewaters using sheep rumen liquor as inoculum: Olive mill wastewaters an alternative for ruminant's nutrition

Directory of Open Access Journals (Sweden)

Moufida Aggoun

2014-12-01

Full Text Available Olive oil mill wastewaters (OMWW are the main liquid effluents generated by the olive oil production industry. This liquid, considered pollutant and toxic, is characterised by its high content of organic matter including mainly sugars and fats, and phenols compounds, which can be used in ruminants feeding. The purpose of this study is to valorise this agricultural by-product in ruminant feeding by estimation its in vitro degradability in presence of ovine ruminale microbiota comparatively to vetch-oat hay, using in vitro gas production technique coupled with NH3-N and protozoa measurements. Cumulative gas production was recorded at 3, 6, 9, 24, 48, 72 and 96 hours of incubation. The determination of gazes produced (carbon dioxide and methane was recorded at 6, 9, 24, 48 and 96 hours. However, Ammonia and protozoa number were recorded after 24 hours of incubation. Fermentation profile was fitted to the exponential model y = a + b (1 – e-kt. The OMWW are characterized by their high sugars content (39.91% and their low content in ash (1.99% and crude protein (2.70%. This by-product is also characterized by its high concentration in total phenols (7.2% and tannins (4.5%. However, they contain a very small amount of condensed tannins (0.89%. Comparatively to vetch-oat hay, OMWW produced low amount of gas (-23.6 units. Furthermore, its in vitro fermentation generates low volume of methane (9.83%, V/V, suggesting that the OMWW nature enhanced the efficiency of ruminale microbiota towards microbial biomass production and inhibition of ruminale methanogenesis pathway. This result is reinforced by the reduction of ammonia production (-0.35 units and protozoa proliferation (-1 unit comparatively to vetch-oat hay. The anaerobic biodegradation of OMWW reveal their significant use by the rumen microbiota, allowing us to strongly recommend its use as a supplement in feed ruminant. In addition, it allows considering using this residue as a feed additive in

THE TECHNOLOGY OF PASTE FROM SUGAR BEET OBTAINING

Directory of Open Access Journals (Sweden)

M. G. Magomedov

2014-01-01

Full Text Available We considered a new technology for processing sugar beet into intermediate product for the food industry. Nowadays sugar beet is mainly used for processing into granulated sugar. In the granulated sugar obtaining sugar beet undergoes deep extraction of all nutrients: proteins, minerals, pectin, organic acids, preventing the crystallization process, and then the refined product (granulated sugar with a mass fraction of sucrose not less than 99.75% is obtained. We developed a technology for producing a sugar beet paste, which allows to preserve both sucrose, and almost all useful for human food substances containing in beet. A sugar beet paste is a valuable food product. Carbohydrates, organic acids, minerals, proteins, dietary fibers and vitamins are found in it. The block diagram of a sugar beet paste is given in the article. Technology of obtaining a sugar beet paste was tested under production conditions at the cannery (Joint Stock Company "Sadovoye" Liskinsky district,. Storozhevoe village, Voronezh region. The chemical composition of the paste (Dry Substances = 40% was determined, the degree of meeting of daily requirement for nutrients was calculated. 100 g of the product satisfy the daily requirement for dietary fiber by 42.5%, organic acids by 27.5% potassium by 24.0%, magnesium by 40.0%, iron by 26.7%. The sugar beet paste can be used as a semi-finished product in the confectionery, bakery, food concentrates industry, for products with increased nutritional value, as well as the finished product instead of marmalade and jam.

The effect of honey compared to sucrose, mixed sugars, and a sugar-free diet on weight gain in young rats.

Science.gov (United States)

Chepulis, L M

2007-04-01

To determine whether honey, sucrose, and mixed sugars as in honey have different effects on weight gain, 40 6-wk-old Sprague-Dawley rats were fed a powdered diet that was either sugar free or contained 8% sucrose, 8% mixed sugars as in honey, or 10% honey freely for 6 wk. Weight gain and food intake were assessed weekly, and at completion of the study blood samples were removed for measurement of blood sugar (HbA1c) and a fasting lipid profile. The animals were then minced and total percentage body fat and protein measured. Overall percentage weight gain was significantly lower in honey-fed rats than those fed sucrose or mixed sugars, despite a similar food intake. Weight gains were comparable for rats fed honey and a sugar free diet although food intake was significantly higher in honey-fed rats. HbA1c and triglyceride levels were significantly higher in all sugar treatments compared with rats fed a sugar free diet, but no other differences in lipid profiles were reported. No differences in percentage body fat or protein levels were reported.

Young People\\'s Relationships with Sugar Daddies and Sugar ...

African Journals Online (AJOL)

s relationships with sugar daddies and mummies. It considers definitional, measurement and analytical issues involved in assessing these relationships, their magnitude, patterns, determinants and consequences. The review compares and ...

Reducing Sugar in Children's Diets: Why? How?

Science.gov (United States)

Rogers, Cosby S.; Morris, Sandra S.

1986-01-01

Maintains that sugar intake should be reduced in young children's diets because of its link to dental cavities, poor nutrition, and obesity. Reducing the focus on sweetness, limiting sugar consumption, and using natural sources of sweetness and other treats are ways to help reduce sugar intake. (BB)

Rare sugars and sugar-based synthons by chemo-enzymatic synthesis.

Science.gov (United States)

Giffhorn; Köpper; Huwig; Freimund

2000-12-01

The unique catalytic potential of the fungal enzyme pyranose oxidase was demonstrated by preparative conversions of a variety of carbohydrates, and by extensive chemical characterization of the reaction products with NMR spectroscopy. The studies revealed that POx not only oxidizes most substrates very efficiently but also that POx possesses a glycosyl-transfer potential, producing disaccharides from beta-glycosides of higher alcohols. Although most substrates are oxidized by POx at the C-2 position, several substrates are converted into the 3-keto-derivatives. On the basis of these products, strategies are developed for the convenient production of sugar-derived synthons, rare sugars and fine chemicals by combining biotechnical and chemical methods.

Sugar Intake, Obesity, and Diabetes in India

Directory of Open Access Journals (Sweden)

Seema Gulati

2014-12-01

Full Text Available Sugar and sweet consumption have been popular and intrinsic to Indian culture, traditions, and religion from ancient times. In this article, we review the data showing increasing sugar consumption in India, including traditional sources (jaggery and khandsari and from sugar-sweetened beverages (SSBs. Along with decreasing physical activity, this increasing trend of per capita sugar consumption assumes significance in view of the high tendency for Indians to develop insulin resistance, abdominal adiposity, and hepatic steatosis, and the increasing “epidemic” of type 2 diabetes (T2DM and cardiovascular diseases. Importantly, there are preliminary data to show that incidence of obesity and T2DM could be decreased by increasing taxation on SSBs. Other prevention strategies, encompassing multiple stakeholders (government, industry, and consumers, should target on decreasing sugar consumption in the Indian population. In this context, dietary guidelines for Indians show that sugar consumption should be less than 10% of total daily energy intake, but it is suggested that this limit be decreased.

46 CFR 50.25-5 - Products requiring manufacturer or mill certification.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Products requiring manufacturer or mill certification... manufacturer or mill certification. (a) Products required to be certified by a manufacturer or by mill... accepted without referring to its manufacturer or mill certification, if: (1) The product is marked in...

3,6-Anhydro-l-galactose, a rare sugar from agar, a new anticariogenic sugar to replace xylitol.

Science.gov (United States)

Yun, Eun Ju; Lee, Ah Reum; Kim, Jung Hyun; Cho, Kyung Mun; Kim, Kyoung Heon

2017-04-15

The significance for anticariogenic sugar substitutes is growing due to increasing demands for dietary sugars and rising concerns of dental caries. Xylitol is widely used as an anticariogenic sugar substitute, but the inhibitory effects of xylitol on Streptococcus mutans, the main cause of tooth decay, are exhibited only at high concentrations. Here, the inhibitory effects of 3,6-anhydro-l-galactose (AHG), a rare sugar from red macroalgae, were evaluated on S. mutans, in comparison with those of xylitol. In the presence of 5g/l of AHG, the growth of S. mutans was retarded. At 10g/l of AHG, the growth and acid production by S. mutans were completely inhibited. However, in the presence of xylitol, at a much higher concentration (i.e., 40g/l), the growth of S. mutans still occurred. These results suggest that AHG can be used as a new anticariogenic sugar substitute for preventing dental caries. Copyright © 2016 Elsevier Ltd. All rights reserved.

FePt magnetic particles prepared by surfactant-assisted ball milling

Energy Technology Data Exchange (ETDEWEB)

Velasco, V., E-mail: vvjimeno@fis.ucm.es [Instituto de Magnetismo Aplicado, UCM-ADIF-CSIC, P.O. Box 155, Las Rozas 28230 (Spain); Departamento de Física de Materiales, Universidad Complutense de Madrid, Madrid 28040 (Spain); Hernando, A.; Crespo, P. [Instituto de Magnetismo Aplicado, UCM-ADIF-CSIC, P.O. Box 155, Las Rozas 28230 (Spain); Departamento de Física de Materiales, Universidad Complutense de Madrid, Madrid 28040 (Spain)

2013-10-15

High-energy ball milling of Fe and Pt elemental powders has been carried out under dry and wet (in presence of solvent and surfactants) conditions. Dry milling leads to the formation of the disordered FCC-FePt alloy whereas by the wet milling procedure the main process is the decrease of Fe and Pt particle size, although some dissolution of Pt into Fe grains cannot be ruled out, and no hint of the formation of the FCC-FePt phase is observed even to milling times up to 20 h, as X-ray diffraction, electron microscopy and Mössbauer spectroscopy indicates. The as-milled particles were annealed at 600 °C for 2 h under Ar atmosphere. It is noticed that the disordered fcc-FePt phase observed in particles milled under dry conditions transform to ordered fct phase characterized by a hard magnetic behavior with a coercive field up to 10,000 Oe. However, those particles milled in the surfactant/solvent medium exhibit a soft magnetic behavior with a coercive field of 600 Oe. These results indicate that wet high-energy ball milling is not an adequate technique for obtaining single-phase FePt particles. - Highlights: • FePt particles have been obtained by high-energy ball milling. • In the presence of surfactants and solvents, almost no alloying process takes place. • After annealing, the coercive field of the FePt alloy particles increases from 150 Oe to 10,000 Oe.

Mineralogy and geochemistry of uranium mill tailings