WorldWideScience

Sample records for cellulose esters

  1. Cellulose Ester / Polyolefin Binary Blends : Rheology, Morphology and Impact Properties

    OpenAIRE

    Besson, François; Vanhille, Aurélie; Budtova, Tatiana

    2012-01-01

    Due to depletion of fossil resources and global environmental respect awareness, interest in biobased plastic materials is tremendously growing. Direct extraction of vegetal polymers like cellulose followed by a chemical modification to bring new properties is one of the paths to produce a bioplastic. Progressively replaced by oil-based polymers in the sixties, thermoplastic cellulose esters are now reconsidered for various materials applications. To improve mechanical weaknesses of cellulose...

  2. Separation of isomeric xylenes by pervaporation through cellulose ester membranes

    NARCIS (Netherlands)

    Mulder, M.H.V.; Kruitz, F.; Smolders, C.A.

    1982-01-01

    The interaction between the isomeric xylenes and different cellulose esters was investigated using solubility parameter considerations and through measurements of swelling values. p]Hansen's three-dimensional solubility parameters δd, δp, δh of all the components have been calculated. These values h

  3. Synergetic deoxy reforming of cellulose and fatty acid esters for liquid hydrocarbon-rich oils.

    Science.gov (United States)

    Wang, Chao; Sui, Jingjing; Lu, Weipeng; Li, Baopeng; Li, Guoxing; Ding, Yihong; Huang, Yong; Geng, Jianxin

    2015-11-01

    A series of liquid hydrocarbons (alkylbenzenes, alkanes, and alkenes) were obtained by a synergetic deoxy reforming (SDR) process of cellulose and linoleic acid methyl ester (LAME) at 350°C and 4-6MPa in a closed system without external source of hydrogen. The liquid product was obtained with a yield of 15wt% at a LAME/cellulose ratio of 0.2. In contrast, the direct deoxy reforming of cellulose produces oil that contains plenty of phenols and oxygen-containing compounds. Due to the insufficiency of water employed (30wt%), a radical reaction pathway was proposed. Quantum chemical calculations indicate that the radicals from LAME interfere with the reactions of the intermediate products from cellulose, being responsible for the removal of phenols and the formation of hydrocarbons. The SDR process offers an embryonic insight in an alternative technique for preparation of hydrocarbon fuels. PMID:26241841

  4. Effect of amino-terminated substrates onto surface properties of cellulose esters and their interaction with lectins

    International Nuclear Information System (INIS)

    Films of cellulose acetate butyrate (CAB) and carboxymethylcellulose acetate butyrate (CMCAB) were deposited from ethyl acetate solutions onto bare silicon wafers (Si/SiO2) or amino-terminated surfaces (APS) by means of equilibrium adsorption. All surfaces were characterized by means of ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The presence of amino groups on the support surface favored the adsorption of CAB and CMCAB, inducing the orientation of most polar groups to the surface and the exposition of alkyl group to the air. Such molecular orientation caused increase of the dispersive component of surface energy (γsd) and decrease of the polar component of surface energy (γsp) of cellulose esters in comparison to those values determined for films deposited onto bare Si/SiO2 wafers. Adsorption behavior of jacalin or concanavalin A onto CAB and CMCAB films was also investigated. The adsorbed amounts of lectins were more pronounced on cellulose esters with high (γsp) and total surface energy (γst) values. - Highlights: ► Amino groups on the substrate induce the orientation of cellulose esters polar groups. ► Amino terminated substrate caused decrease of surface energy of cellulose ester films. ► Lectins adsorbed preferentially onto cellulose esters with high surface energy.

  5. Effect of amino-terminated substrates onto surface properties of cellulose esters and their interaction with lectins

    Energy Technology Data Exchange (ETDEWEB)

    Amim, Jorge [Instituto de Quimica, Universidade de Sao Paulo, Av. Prof. Lineu Prestes 748, 05508-000 Sao Paulo (Brazil); Instituto de Quimica, Universidade Federal do Rio de Janeiro, Campus Macae, Av. Aluizio Gomes da Silva 50, 27930-560, Macae (Brazil); Petri, Denise F.S., E-mail: dfsp@usp.br [Instituto de Quimica, Universidade de Sao Paulo, Av. Prof. Lineu Prestes 748, 05508-000 Sao Paulo (Brazil)

    2012-02-01

    Films of cellulose acetate butyrate (CAB) and carboxymethylcellulose acetate butyrate (CMCAB) were deposited from ethyl acetate solutions onto bare silicon wafers (Si/SiO{sub 2}) or amino-terminated surfaces (APS) by means of equilibrium adsorption. All surfaces were characterized by means of ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The presence of amino groups on the support surface favored the adsorption of CAB and CMCAB, inducing the orientation of most polar groups to the surface and the exposition of alkyl group to the air. Such molecular orientation caused increase of the dispersive component of surface energy ({gamma}{sub s}{sup d}) and decrease of the polar component of surface energy ({gamma}{sub s}{sup p}) of cellulose esters in comparison to those values determined for films deposited onto bare Si/SiO{sub 2} wafers. Adsorption behavior of jacalin or concanavalin A onto CAB and CMCAB films was also investigated. The adsorbed amounts of lectins were more pronounced on cellulose esters with high ({gamma}{sub s}{sup p}) and total surface energy ({gamma}{sub s}{sup t}) values. - Highlights: Black-Right-Pointing-Pointer Amino groups on the substrate induce the orientation of cellulose esters polar groups. Black-Right-Pointing-Pointer Amino terminated substrate caused decrease of surface energy of cellulose ester films. Black-Right-Pointing-Pointer Lectins adsorbed preferentially onto cellulose esters with high surface energy.

  6. Cellulose esters synthesized using a tetrabutylammonium acetate and dimethylsulfoxide solvent system

    Science.gov (United States)

    Yu, Yongqi; Miao, Jiaojiao; Jiang, Zeming; Sun, Haibo; Zhang, Liping

    2016-07-01

    Cellulose acetate (CA) and cellulose acetate propionate (CAP) were homogeneously synthesized in a novel tetrabutylammonium acetate/dimethyl sulfoxide (DMSO) solvent system, without any catalyst, at temperatures below 70 °C. The molecular structures of the cellulose esters (CEs) and distributions of the substituents in the anhydroglucose repeating units were determined using 13C cross-polarization magic angle spinning nuclear magnetic resonance spectroscopy, and the degree of substitution (DS) values were determined using 1H nuclear magnetic resonance spectroscopy. The structures of the CEs, regenerated cellulose (RC), and pulp were determined using Fourier transform infrared spectroscopy. The thermal properties of the products were determined using thermogravimetric analysis. The temperatures of initial decomposition of the CEs were up to 40 °C higher than those of the RC and pulp. All the CEs were highly soluble in DMSO, but were insoluble in acetone. CAs with DS values less than 2.6 swelled or were poorly dissolved in CHCl3, but those with DS values above 2.9 dissolved rapidly. CAPs with DS values above 2.6 had good solubilities in ethyl acetate.

  7. Preparation and properties of environmental-friendly coatings based on carboxymethyl cellulose nitrate ester & modified alkyd.

    Science.gov (United States)

    Duan, Hongtao; Shao, Ziqiang; Zhao, Ming; Zhou, Zhenwen

    2016-02-10

    Amphipathic coating basic film-forming material carboxymethyl cellulose nitrate ester (CMCN) was synthesized and characterizations of CMCN with different ratio of functional groups were studied. Ratios of functional groups on each repeating units of CMCN have great importance in the decision of CMCN properties using as an amphipathic coating basic film-forming material and ratios of functional groups were the most concerned of the study. Ratios of functional groups on each repeating units of CMCN were measured by elemental analyzer and calculated. Series of experiments were conducted using different ratios of functional groups of CMCN. Thermal properties of CMCN were measured by FT-IR and TG. Densities of CMCN powders were measured. Aqueous coatings based on CMCN/alkyd (after chemical modified by coconut oil) were prepared and morphology & rheology of CMCN hydrophilic dispersions were measured using an Anton-Paar-Strasse 20A-8054 Graz analyzer. Contact angles between films based on CMCN and deionized water were recorded. Other properties of films were measured. CMCN with the etherification of carboxymethyl groups at 0.35-0.40, nitrate ester groups at 1.96-2.19 and hydroxyl groups at 0.46-0.64 per d-glucose was considered as the best film forming material. PMID:26686109

  8. Novel cellulose ester substrates for high performance flat-sheet thin-film composite (TFC) forward osmosis (FO) membranes

    KAUST Repository

    Ong, Rui Chin

    2015-01-01

    A novel hydrophilic cellulose ester with a high intrinsic water permeability and a water partition coefficient was discovered to construct membrane supports for flat-sheet thin film composite (TFC) forward osmosis (FO) membranes for water reuse and seawater desalination with high performance. The performance of TFC-FO membranes prepared from the hydrophilic cellulose ester containing a high degree of OH and a moderate degree of Pr substitutions clearly surpasses those prepared from cellulose esters and other polymers with moderate hydrophilicity. Post-treatments of TFC-FO membranes using sodium dodecyl sulfate (SDS) and glycerol followed by heat treatment further enhance the water flux without compromising the selectivity. Positron annihilation lifetime analyses have confirmed that the SDS/glycerol post-treatment increases the free volume size and fractional free volume of the polyamide selective layer. The newly developed post-treated TFC-FO membranes exhibit a remarkably high water flux up to 90 LMH when the selective layer is oriented towards the draw solution (i.e., PRO mode) using 1. M NaCl as the draw solution and DI water as the feed. For seawater desalination, the membranes display a high water flux up to 35 LMH using a 2. M NaCl draw solution. These water fluxes exceeded the water fluxes achieved by other types of FO membranes reported in literatures. © 2014 Elsevier B.V.

  9. Control of polyaniline deposition on microporous cellulose ester membranes by in situ chemical polymerization.

    Science.gov (United States)

    Qaiser, Asif A; Hyland, Margaret M; Patterson, Darrell A

    2009-11-12

    Polyaniline (PANI) can be deposited either on the surface or in the bulk of a microporous membrane by various chemical oxidative polymerization techniques. Each technique has distinctive effects on the PANI site and extent of deposition on the base membrane. In the present study, mixed cellulose ester (ME) membranes with tortuous pore morphology were used as base membranes. The chemical oxidative polymerization techniques employed, included polymerization using an in-house-built two-compartment permeation cell. The resultant composite membranes have been characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR-ATR), and electrical conductivity measurements. The results showed that PANI was layered on the pore walls of the membrane using two-compartment permeation cell. Vapor-phase polymerization yielded a surface layer of PANI with little deposition in the bulk. A distorted PANI surface layer was achieved by solution-phase (dip) polymerization. Moreover, asymmetric PANI deposition within the membrane bulk was evidenced using two-compartment permeation cell. Composite membranes synthesized using two-compartment cell showed highest levels of conductivity (approximately 10(-2) S/cm) as compared to the membranes modified by single-step solution-phase polymerization. FTIR-ATR results indicated the extent of PANI coating and its oxidation state which was identified as doped emeraldine PANI, from all the employed techniques. Asymmetric deposition and extent have been explained in terms of the physical and chemical reaction steps involved in the heterogeneous aniline polymerization reactions in the two-compartment cell technique. PMID:19888765

  10. Cellulose

    Science.gov (United States)

    Cellulose properties and structure are reviewed, with a primary focus on crystal structure and polymorphy. This focus highlights the conversion from cellulose I to cellulose II, which converts the molecules to being all parallel to each other in the crystal to being antiparallel. This has been co...

  11. Enantioseparation of Racemic Naproxen Esters on Cellulose Tris (4-methylbenzoate) Chiral Stationary Phase

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Several kinds of racemic naproxen ester were successfully separated on CTMB chiral stationary phase with hexane-ethanol (98:2, vol./vol.) as the mobile phase. The influence of mobile phase composition and structure of racemic naproxen ester on chiral separation was studied and the chiral recognition mechanism of CTMB was discussed.

  12. Enantioseparation of Racemic Naproxen Esters on Cellulose Tris(4—methylbenzoate) Chiral Stationary Phase

    Institute of Scientific and Technical Information of China (English)

    BaoHaiSHAO; XiuZhuXU; 等

    2002-01-01

    Several kinds of racemic naproxen ester were successfully separated on CTMB chiral stationary phase with hexane-ethanol(98:2,vol./vol.) as the mobile phase. The influence of mobile phase composition and structure of racemic naproxen ester on chiral separation was studied and the chiral recognition mechanism of CTMB was discussed.

  13. Oxidized cellulose esters: I. Preparation and characterization of oxidized cellulose acetates--a new class of biodegradable polymers.

    Science.gov (United States)

    Kumar, V; Yang, D

    2002-01-01

    Oxidized cellulose acetates (OCA), with a degree of substitution (DS) value ranging between 1.1 and 2.3 and a free carboxylic acid group content of 20% (w/w), have been prepared by reacting oxidized cellulose (OC, COOH content 20% w/w) with a mixture of acetic acid and acetic anhydride in the presence of sulfuric acid as a catalyst. The DS of OCA, in general, increased with increasing reaction temperature, reaction time, and concentration of acetic anhydride in the reaction mixture. The yield of OCA, in contrast, increased with increasing concentration of acetic anhydride and decreased with increasing reaction time and temperature. The intrinsic viscosity of OCA varied between 0.100 and 0.275, depending on the reaction conditions used during its preparation. In general, an increase in reaction temperature and the use of a prolonged reaction time decreased the intrinsic viscosity of OCA. No correlation was found between DS and intrinsic viscosity of OCA. The apparent pKa of OCA is 3.7-3.9. The new OCA polymers are practically insoluble in water and slowly dissolve in pH 7.4 phosphate buffer solution. They are, however, soluble in a range of organic solvents (e.g. ethyl acetate, acetone, acetone/water, chloroform/methylene chloride, dimethylsulfoxide, dimethylformamide, and/or chloroform/methanol). PMID:12102594

  14. Lyocell Fiber-Reinforced Cellulose Ester Composites - Surface and Consolidation Considerations, and Properties

    OpenAIRE

    Seavey, Kevin Christopher

    1999-01-01

    The objective of this thesis was to further develop the polymer composite system consisting of cellulose acetate butyrate (CAB) and high modulus, continuous, regenerated cellulose fiber (lyocell). Of particular concern were both the interfacial adhesion between the fiber and matrix and the consolidation process in the manufacture of these composite materials. Interfacial adhesion was found to be substantial due to the relative lack of the fiber pull-out phenomenon observed after tensil...

  15. Microbubble ultrasound contrast agent with three esters and carboxylic methyl cellulose as main shell materials: Its preparation and imaging evaluation

    Institute of Scientific and Technical Information of China (English)

    杜永峰; 万明习; 周晓东

    2003-01-01

    Objective: To study on the preparation process of a new surfactant-based microbubble ultrasound contrast agent and to evaluate its contrast effects in vivo. Methods: Microbubble ultrasound contrast agent with three ester surfactants and other additives as its shell materials was prepared by sonication. Sulfur hexafluoride was adopted as the inner gas of the microbubbles. New methods through the combination of optical microscope and some softwares were used to measure the size distribution and the concentration of the microbubbles. Some parameters such as the pH value of the phosphate buffer, quantity of the carboxylic methyl cellulose in the shell materials, selection of the ultrasound power and process time, were studied. Six hybirded dogs were used to verify the in vivo contrast imaging of the contrast agent using second harmonic power Doppler modality. Safety and persistent time of the agent inner animal body were also investigated. Results: Ultrasound contrast agent prepared in the experiment had an average microbubble diameter of 3.95 microns with concentration of 3.6×109 microbubbles per millilitre. Carboxylic methyl cellulose was found as an important shell material which had obviously effect on the microbubble stability and production even with a little quantity. The buffer pH value also had a key role on the microbubble formation and the final production. When the buffer pH value reached 7.4, there was no microbubble produced. Under the approximate microbubble production, process time could be shorten with the increasing ultrasound power. The obvious ultrasound contrast imaging effects were detected in the dog's heart chamber and liver as well as kidney using only one millilitre agent when diluted. The agent was found safe to the dogs. At the same time, persistent time of the agent was found over 20 min in the dog's body. Conclusion: The new ultrasound contrast agent prepared in the experiment has high microbubble production and concentration, narrow

  16. Controlled-release cellulose esters matrices for water-soluble diclofenac sodium: compression and dissolution studies.

    Science.gov (United States)

    Obeidat, W M; Alzoubi, N M

    2014-02-01

    Matrix tablets comprising of a blend of cellulose acetate butyrate (CAB) or cellulose acetate propionate (CAP) and alpha-lactose monohydrate were prepared by direct compression to control the release of diclofenac sodium. Tablet formulations containing CAP75000 or CAB50-54 exhibited highest extents, but lowest onsets of plastic deformation and lowest release rates in buffer medium, while tablets containing CAP15000 or CAB35-39 exhibited lowest extents, but highest rates of plastic deformation and highest release rates in buffer medium. The DA values obtained from Heckel plots and the DI values obtained from Kawakita plots showed similar trends. A plot of compression pressure or crushing strengths against T50% showed curvilinear relationship for all tablets. Tablets containing 40 % CAB35-39 (formulation F7D) was considered the best formulation in terms of T50%, compressibility and compactability. PMID:24640597

  17. Lyocell Fiber-Reinforced Cellulose Ester Composites-Manufacturing Considerations and Properties.

    OpenAIRE

    Ghosh, Indrajit

    1999-01-01

    Biodegradable thermoplastic composites were prepared using high modulus lyocell fibers and cellulose acetate butyrate (CAB). Two reinforcement fiber types: fabric and continuous fiber tow were used. Fabric had advantages of uniform alignment and easier processing, but lacked the use as a unidirectional reinforcement and a continuous method of matrix application. Three different matrix application methods were screened for both fiber types. Matrix application by suspension of particles in wate...

  18. Preparation and Application of Tripeptide-cellulose Ester%三肽纤维素酯的制备及应用研究

    Institute of Scientific and Technical Information of China (English)

    李杨; 朱进科; 李连杰; 蒋登高

    2016-01-01

    Tripeptide-cellulose ester ( TPC) was synthesized by sequent acyl chlorination, esterification, peptide elongation and amino modification using microcrystalline cellulose as raw material and N-(9-fluorenylmethoxycarbonyl)-L-proline(FMOC-L-Pro-OH), N-(9-fluorenylmethoxycarbonyl)-L-valinamide-L-phenylalanine(FMOC-L-Val-L-Phe-OH), 3,5-dinitrobenzoic acid as derivatization reagents. The experimental results showed that during the synthesis process, esterification, a key step, was performed firstly, and followed by the extension of peptide chain. The effects of various experimental factors on esterification and substitution degree ( DS ) were investigated. The optimal condition was described as that the mass concentration of avicel in LiCl/DMAc 20 g/L, the molar ratio of —C(O)Cl to the hydroxyl content of cellulose 3∶1, reaction temperature 100℃ and reaction time 20 h. By the further peptide elongation and amino modification, the tripeptide-cellulose ester with DS 2. 15 was synthesized. The structure and properties were then characterized by using Fourier transform infrared spectroscopy, elemental analysis, X-ray diffraction and thermogravimetric analysis. The results showed that the modification of peptide by 3,5-dinitrobenzoic acid was successful and the synthesis process was feasible. With the alteration of precipitants, the intramolecular hydrogen bond was different and the obtained derivatives had different characteristics and functionalities. The tripeptide-cellulose ester precipitated in methanol was good enteric-coating material with good shading effect and rapid disintegration, but the physiological toxicity needed further study. The tripeptide-cellulose ester ( using water as the precipitant) could be coated onto silica gel to get a chiral stationary phase, which has a wider application than previous coated-cellulose chiral stationary phase. In addition, the stable chemical resistance of tripeptide-cellulose ester was particularly suitable for the

  19. Electrochemical synthesis of cellulose mesylate

    Science.gov (United States)

    Khidirov, Sh Sh; Akhmedov, M. A.; Khibiev, H. S.

    2016-04-01

    The article deal with the possibility anode modification of cellulose to form its ester - mesylate by voltametric measurement method and preparative electrosynthesis on a platinum electrode in the system cellulose - dimethyl sulfoxide - methanesulfonic

  20. Collagen-graft mixed cellulose esters membrane maintains undifferentiated morphology and markers of potential pluripotency in feeder-free culture of induced pluripotent stem cells.

    Science.gov (United States)

    Lotfalah Moradi, Sadegh; Hajishafieeha, Zahra; Nojedehi, Shahrzad; Dinarvand, Vida; Hesami Tackallou, Saeed; Roy, Ram V; Ardeshirylajimi, Abdolreza; Soleimani, Masoud

    2016-09-01

    Induced pluripotent stem cells (iPSCs) are unique and unlimited clinical sources of stem cell therapy for the regenerative medicine. Feeder layer preparation is an important step for iPSCs production, which is expensive, time-consuming and requires conversance. In the present study, we investigated the maintenance of pluripotency, and stemness of the iPSCs through feeder-free culture on a collagen-grafted Mixed Cellulose Esters membrane (MCE-COL) after three passages during twelve days. Results have demonstrated that the iPSCs cultured on MCE-COL membrane had a fine, typical undifferentiated morphology, increased proliferation rate and significant multi-lineage differentiation potential. Alkaline phosphatase (ALP) staining and pluripotency associated gene markers expression further confirmed that iPSCs cultured on the surface of MCE-COL had more ALP positive colonies and enhanced expression of Oct-4, Nanog, Sox-2 and ALP in comparison with MCE and control groups. Since MCE-COL membrane has three dimensional structure and bioactivity, it has the potential for usage in the feeder-free culture of iPSCs, and could be a suitable candidate to use as a feeder layer in stem cells preparation. PMID:27449919

  1. Chemical modification of cellulose for electrospinning applications

    OpenAIRE

    Martín Ferrer, Elena

    2013-01-01

    The aim of the thesis is to develop technology for producing cellulose fatty acid esters that later will be used to produce fibrous materials by means of electrospinning. Main material of the study is cellulose-stearate which is a polymer synthesised by reaction between stearoyl chloride and cellulose. The experimental part consists of synthesis of it by chemical modification of cellulose using ionic liquid as a reaction media. In addition, ionic liquid is also synthesised from the beginning....

  2. Pharmaceutical significance of cellulose: A review

    Directory of Open Access Journals (Sweden)

    2008-11-01

    Full Text Available The amalgamation of polymer and pharmaceutical sciences led to the introduction of polymer in the design and development of drug delivery systems. Polymeric delivery systems are mainly intended to achieve controlled or sustained drug delivery. Polysaccharides fabricated into hydrophilic matrices remain popular biomaterials for controlled-release dosage forms and the most abundant naturally occurring biopolymer is cellulose; so hdroxypropylmethyl cellulose, hydroxypropyl cellulose, microcrystalline cellulose and hydroxyethyl cellulose can be used for production of time controlled delivery systems. Additionally microcrystalline cellulose, sodium carboxymethyl cellulose, hydroxypropylmethyl cellulose, hydroxyethyl cellulose as well as hydroxypropyl cellulose are used to coat tablets. Cellulose acetate phthalate and hydroxymethyl cellulose phthalate are also used for enteric coating of tablets. Targeting of drugs to the colon following oral administration has also been accomplished by using polysaccharides such as hdroxypropylmethyl cellulose and hydroxypropyl cellulose in hydrated form; also they act as binders that swell when hydrated by gastric media and delay absorption. This paper assembles the current knowledge on the structure and chemistry of cellulose, and in the development of innovative cellulose esters and ethers for pharmaceuticals.

  3. Cellulose is not just cellulose

    DEFF Research Database (Denmark)

    Hidayat, Budi Juliman; Felby, Claus; Johansen, Katja S.;

    2012-01-01

    Most secondary plant cell walls contain irregular regions known as dislocations or slip planes. Under industrial biorefining conditions dislocations have recently been shown to play a key role during the initial phase of the enzymatic hydrolysis of cellulose in plant cell walls. In this review we...... not regions where free cellulose ends are more abundant than in the bulk cell wall. In more severe cases cracks between fibrils form at dislocations and it is possible that the increased accessibility that these cracks give is the reason why hydrolysis of cellulose starts at these locations. If acid...

  4. Evaluation of the permeability of modified cellulose acetate propionate membranes for use in biosensors based on hydrogen peroxide detection

    OpenAIRE

    Guiomar, A. Jorge; Stephen D. Evans; Guthrie, James

    2001-01-01

    Phase inversion cellulose acetate propionate membranes showed lowpermeability to hydrogen peroxide aqueous solutions. Their permeability wasincreased by alkaline hydrolysis of the ester linking units. However, thepermeability remained lower than that of an unsubstituted cellulose membrane.The inclusion of hydroxypropyl cellulose in the membrane formulation, followedby an alkaline hydrolysis step, increased permeability to hydrogen peroxideaqueous solutions to 29% of that of an unsubstituted c...

  5. Kapok oil methyl esters

    International Nuclear Information System (INIS)

    The increased need for biodiesel feedstocks has caused various vegetable oils to be examined for this purpose. In the present work, the methyl esters of kapok (Ceiba pentandra) oil were prepared. The essential fuel properties were comprehensively determined and evaluated in comparison to specifications in biodiesel standards and some prior results. The kinematic viscosity of kapok oil methyl esters was greater than expected, an observation traced to the elevated amounts of methyl esters with cyclic moieties. Overall, kapok oil is a potential biodiesel feedstock. The 1H and 13C NMR spectra of kapok methyl esters are reported. - Highlights: • Methyl esters of kapok oil generally acceptable as a biodiesel fuel. • Kapok oil methyl esters a fuel with elevated content of fatty acid methyl esters containing cyclic moieties. • Kinematic viscosity of kapok oil methyl esters elevated likely due to fatty ester methyl esters with cyclic moieties. • Discusses and compares present results with prior literature

  6. Cellulose fiber reinforced thermoplastic composites: Processing and Product Charateristics

    OpenAIRE

    Razaina Mat TAIB

    1998-01-01

    Cellulose Fiber-Reinforced Thermoplastic Composites: Process and Product Characterization Razaina Mat Taib ( Abstract ) Steam exploded fibers from Yellow Poplar (Liriodendron tulipifera) wood were assessed in terms of (a) their impact on torque during melt processing of a thermoplastic cellulose ester (plasticized CAB); (b) their fiber incorporation and dispersion characteristics in a CAB-based composite by SEM and image analysis, respectively; and (c) their impact on the me...

  7. Utilization of biocatalysts in cellulose waste minimization

    Energy Technology Data Exchange (ETDEWEB)

    Woodward, J.; Evans, B.R.

    1996-09-01

    Cellulose, a polymer of glucose, is the principal component of biomass and, therefore, a major source of waste that is either buried or burned. Examples of biomass waste include agricultural crop residues, forestry products, and municipal wastes. Recycling of this waste is important for energy conservation as well as waste minimization and there is some probability that in the future biomass could become a major energy source and replace fossil fuels that are currently used for fuels and chemicals production. It has been estimated that in the United States, between 100-450 million dry tons of agricultural waste are produced annually, approximately 6 million dry tons of animal waste, and of the 190 million tons of municipal solid waste (MSW) generated annually, approximately two-thirds is cellulosic in nature and over one-third is paper waste. Interestingly, more than 70% of MSW is landfilled or burned, however landfill space is becoming increasingly scarce. On a smaller scale, important cellulosic products such as cellulose acetate also present waste problems; an estimated 43 thousand tons of cellulose ester waste are generated annually in the United States. Biocatalysts could be used in cellulose waste minimization and this chapter describes their characteristics and potential in bioconversion and bioremediation processes.

  8. Physical properties of agave cellulose graft polymethyl methacrylate

    Science.gov (United States)

    Rosli, Noor Afizah; Ahmad, Ishak; Abdullah, Ibrahim; Anuar, Farah Hannan

    2013-11-01

    The grafting polymerization of methyl methacrylate and Agave cellulose was prepared and their structural analysis and morphology were investigated. The grafting reaction was carried out in an aqueous medium using ceric ammonium nitrate as an initiator. The structural analysis of the graft copolymers was carried out by Fourier transform infrared and X-ray diffraction. The graft copolymers were also characterized by field emission scanning electron microscopy (FESEM). An additional peak at 1732 cm-1 which was attributed to the C=O of ester stretching vibration of poly(methyl methacrylate), appeared in the spectrum of grafted Agave cellulose. A slight decrease of crystallinity index upon grafting was found from 0.74 to 0.68 for cellulose and grafted Agave cellulose, respectively. Another evidence of grafting showed in the FESEM observation, where the surface of the grafted cellulose was found to be roughed than the raw one.

  9. Physical properties of agave cellulose graft polymethyl methacrylate

    Energy Technology Data Exchange (ETDEWEB)

    Rosli, Noor Afizah; Ahmad, Ishak; Abdullah, Ibrahim; Anuar, Farah Hannan [Polymer Research Centre (PORCE), School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi Selangor (Malaysia)

    2013-11-27

    The grafting polymerization of methyl methacrylate and Agave cellulose was prepared and their structural analysis and morphology were investigated. The grafting reaction was carried out in an aqueous medium using ceric ammonium nitrate as an initiator. The structural analysis of the graft copolymers was carried out by Fourier transform infrared and X-ray diffraction. The graft copolymers were also characterized by field emission scanning electron microscopy (FESEM). An additional peak at 1732 cm{sup −1} which was attributed to the C=O of ester stretching vibration of poly(methyl methacrylate), appeared in the spectrum of grafted Agave cellulose. A slight decrease of crystallinity index upon grafting was found from 0.74 to 0.68 for cellulose and grafted Agave cellulose, respectively. Another evidence of grafting showed in the FESEM observation, where the surface of the grafted cellulose was found to be roughed than the raw one.

  10. Physical properties of agave cellulose graft polymethyl methacrylate

    International Nuclear Information System (INIS)

    The grafting polymerization of methyl methacrylate and Agave cellulose was prepared and their structural analysis and morphology were investigated. The grafting reaction was carried out in an aqueous medium using ceric ammonium nitrate as an initiator. The structural analysis of the graft copolymers was carried out by Fourier transform infrared and X-ray diffraction. The graft copolymers were also characterized by field emission scanning electron microscopy (FESEM). An additional peak at 1732 cm−1 which was attributed to the C=O of ester stretching vibration of poly(methyl methacrylate), appeared in the spectrum of grafted Agave cellulose. A slight decrease of crystallinity index upon grafting was found from 0.74 to 0.68 for cellulose and grafted Agave cellulose, respectively. Another evidence of grafting showed in the FESEM observation, where the surface of the grafted cellulose was found to be roughed than the raw one

  11. Cellulose based conductive polymers

    OpenAIRE

    Lin, Haishu

    2015-01-01

    Conductive fibers show potential applications in different areas. In this thesis, cellulose and its derivatives, including carboxymethyl cellulose, cellulose acetate as well as methyl cellulose were used to produce fibers via wet spinning. Different conductive materials were also introduced in an attempt to obtain cellulose-derived conductive fibers. Different conductive fillers (Zelec, carbon black, conductive polymers) were evaluated. Among them, PEDOT and PPy conductive polymers showed...

  12. Graft Copolymerization Of Methyl Methacrylate Onto Agave Cellulose

    International Nuclear Information System (INIS)

    The grafting polymerization of methyl methacrylate (MMA) and Agave cellulose was prepared and the grafting reaction conditions were optimized by varying the reaction time and temperature, and ratio of monomer to cellulose. The resulting graft copolymers were characterized by Fourier transform infrared, X-ray diffraction analysis, thermogravimetric analysis, and scanning electron microscopy (SEM). The experimental results showed that the optimal conditions were at a temperature of 45 degree Celsius for 90 min with ratio monomer to cellulose at 1:1 (g/ g). An additional peak at 1738 cm-1 which was attributed to the C=O of ester stretching vibration of poly(methyl methacrylate), appeared in the spectrum of grafted Agave cellulose. A slight decrease of crystallinity index upon grafting was found from 0.74 to 0.68 for cellulose and grafted cellulose, respectively. Grafting of MMA onto cellulose enhanced its thermal stability and SEM observation further furnished evidence of grafting MMA onto Agave cellulose with increasing cellulose diameter and surface roughness. (author)

  13. Electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2010-05-04

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  14. Cellulose synthase interacting protein: A new factor in cellulose synthesis

    OpenAIRE

    Gu, Ying; Somerville, Chris

    2010-01-01

    Cellulose is the most abundant biopolymer on earth. The great abundance of cellulose places it at the forefront as a primary source of biomass for renewable biofuels. However, the knowledge of how plant cells make cellulose remains very rudimentary. Cellulose microfibrils are synthesized at the plasma membrane by hexameric protein complexes, also known as cellulose synthase complexes. The only known components of cellulose synthase complexes are cellulose synthase (CESA) proteins until the re...

  15. CELLULOSIC NANOCOMPOSITES: A REVIEW

    Directory of Open Access Journals (Sweden)

    Martin A. Hubbe

    2008-08-01

    Full Text Available Because of their wide abundance, their renewable and environmentally benign nature, and their outstanding mechanical properties, a great deal of attention has been paid recently to cellulosic nanofibrillar structures as components in nanocomposites. A first major challenge has been to find efficient ways to liberate cellulosic fibrils from different source materials, including wood, agricultural residues, or bacterial cellulose. A second major challenge has involved the lack of compatibility of cellulosic surfaces with a variety of plastic materials. The water-swellable nature of cellulose, especially in its non-crystalline regions, also can be a concern in various composite materials. This review of recent work shows that considerable progress has been achieved in addressing these issues and that there is potential to use cellulosic nano-components in a wide range of high-tech applications.

  16. Cellulose-silica aerogels.

    Science.gov (United States)

    Demilecamps, Arnaud; Beauger, Christian; Hildenbrand, Claudia; Rigacci, Arnaud; Budtova, Tatiana

    2015-05-20

    Aerogels based on interpenetrated cellulose-silica networks were prepared and characterised. Wet coagulated cellulose was impregnated with silica phase, polyethoxydisiloxane, using two methods: (i) molecular diffusion and (ii) forced flow induced by pressure difference. The latter allowed an enormous decrease in the impregnation times, by almost three orders of magnitude, for a sample with the same geometry. In both cases, nanostructured silica gel was in situ formed inside cellulose matrix. Nitrogen adsorption analysis revealed an almost threefold increase in pores specific surface area, from cellulose aerogel alone to organic-inorganic composite. Morphology, thermal conductivity and mechanical properties under uniaxial compression were investigated. Thermal conductivity of composite aerogels was lower than that of cellulose aerogel due to the formation of superinsulating mesoporous silica inside cellulose pores. Furthermore, composite aerogels were stiffer than each of reference aerogels. PMID:25817671

  17. Bacterial production of free fatty acids from freshwater macroalgal cellulose

    OpenAIRE

    Hoovers, Spencer W.; Marner, Wesley D.; Brownson, Amy K.; Lennen, Rebecca M; Wittkopp, Tyler M.; Yoshitani, Jun; Zulkifly, Shahrizim; Linda E Graham; Chaston, Sheena D.; McMahon, Katherine D.; Pfleger, Brian F.

    2011-01-01

    The predominant strategy for using algae to produce biofuels relies on the overproduction of lipids in microalgae with subsequent conversion to biodiesel (methyl-esters) or green diesel (alkanes). Conditions that both optimize algal growth and lipid accumulation rarely overlap, and differences in growth rates can lead to wild species outcompeting the desired lipid-rich strains. Here, we demonstrate an alternative strategy in which cellulose contained in the cell walls of multicellular algae i...

  18. Apomorphine and its esters

    DEFF Research Database (Denmark)

    Borkar, Nrupa; Chen, Zhizhong; Saaby, Lasse;

    2016-01-01

    Oral delivery of apomorphine via prodrug principle may be a potential treatment for Parkinson's disease. The purpose of this study was to investigate the transport and stability of apomorphine and its esters across Caco-2 cell monolayer and their affinity towards chylomicrons. Apomorphine...

  19. Lubricants based on synthetic esters; Schmierstoffe auf Basis synthetischer Ester

    Energy Technology Data Exchange (ETDEWEB)

    Fahl, J. [Forschung und Entwicklung Kaeltemaschinenoele, Fuchs DEA Schmierstoffe GmbH, Hamburg (Germany)

    2000-07-01

    This article describes the synthetic esters that are being used in refrigeration applications that use chlorine-free working fluids. The chemical basics involved in these high-performance lubricants, their manufacture and their lubricating properties are looked at in detail. The history of their development from their use as machining oils, lubricants for weapons and two-stroke engines through to turbine lubricants and as hydraulic oil in aeronautics is reviewed. Modern neopentyl-polyol esters used in refrigeration applications are described. Further, the chemical structures and applications of complex esters, carbonate esters, aromatic and silicate esters are looked at.

  20. Cellulose Synthesis and Its Regulation

    OpenAIRE

    Li, Shundai; Bashline, Logan; Lei, Lei; Gu, Ying

    2014-01-01

    Cellulose, the most abundant biopolymer synthesized on land, is made of linear chains of ß (1–4) linked D-glucose. As a major structural component of the cell wall, cellulose is important not only for industrial use but also for plant growth and development. Cellulose microfibrils are tethered by other cell wall polysaccharides such as hemicellulose, pectin, and lignin. In higher plants, cellulose is synthesized by plasma membrane-localized rosette cellulose synthase complexes. Despite the re...

  1. Fulton Cellulosic Ethanol Biorefinery

    Energy Technology Data Exchange (ETDEWEB)

    Sumait, Necy [BlueFire Ethanol, Irvine, CA (United States); Cuzens, John [BlueFire Ethanol, Irvine, CA (United States); Klann, Richard [BlueFire Ethanol, Irvine, CA (United States)

    2015-07-24

    Final report on work performed by BlueFire on the deployment of acid hydrolysis technology to convert cellulosic waste materials into renewable fuels, power and chemicals in a production facility to be located in Fulton, Mississippi.

  2. Valyl benzyl ester chloride

    Directory of Open Access Journals (Sweden)

    Grzegorz Dutkiewicz

    2010-02-01

    Full Text Available In the title compound (systematic name: 1-benzyloxy-3-methyl-1-oxobutan-2-aminium chloride, C12H18NO2+·Cl−, the ester group is approximately planar, with a maximum deviation of 0.040 (2 Å from the least-squares plane, and makes a dihedral angle of 28.92 (16° with the phenyl ring. The crystal structure is organized by N—H...Cl hydrogen bonds which join the two components into a chain along the b axis. Pairs of chains arranged antiparallel are interconnected by further N—H...Cl hydrogen bonds, forming eight-membered rings. Similar packing modes have been observed in a number of amino acid ester halides with a short unit-cell parameter of ca 5.5 Å along the direction in which the chains run.

  3. Catalytic pyrolysis of cellulose in ionic liquid [bmim]OTf.

    Science.gov (United States)

    Qu, Guangfei; He, Weiwei; Cai, Yingying; Huang, Xi; Ning, Ping

    2016-09-01

    This study discussed the catalytic cracking process of cellulose in ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([bmim]OTF) under 180°C, 240°C and 340°C, found that [bmim]OTF is an effective catalyst which can effectively reduce the pyrolysis temperature(nearly 200°C) of the cellulose. FRIR, XRD and SEM were used to analyze the structure characterization of fiber before and after the cracking; GC-MS was used for liquid phase products analysis; GC was used to analyze gas phase products. The results showed that the cellulose pyrolysis in [bmim]OTf mainly generated CO2, CO and H2, also generated 2-furfuryl alcohol, 2,5-dimethyl-1,5-diallyl-3-alcohol, 1,4-butyrolactone, 5-methyl furfural, 4-hydroxy butyric acid, vinyl propionate, 1-acetoxyl group-2-butanone, furan formate tetrahydrofuran methyl ester liquid product, and thus simulated the evolution mechanism of cellulose pyrolysis products based on the basic model of cellulose monomer. PMID:27185153

  4. Photoresponsive Cellulose Nanocrystals

    Directory of Open Access Journals (Sweden)

    Dimitris S Argyropoulos

    2011-07-01

    Full Text Available In this communication a method for the creation of fluorescent cellulose nanoparticles using click chemistry and subsequent photodimerization of the installed side‐ chains is demonstrated. In the first step, the primary hydroxyl groups on the surface of the CNCs were converted to carboxylic acids by using TEMPO‐mediated hypohalite oxidation. The alkyne groups, essential for the click reaction, were introduced into the surface of TEMPO‐ oxidized CNCs via carbodiimide‐mediated formation of an amide linkage between monomers carrying an amine functionality and carboxylic acid groups on the surface of the TEMPO‐oxidized CNCs. Finally, the reaction of surface‐modified TEMPO‐oxidized cellulose nanocrystals and azido‐bearing coumarin and anthracene monomers were carried out by means of a click chemistry, i.e., Copper(I‐catalyzed Azide‐Alkyne Cycloaddition (CuAAC to produce highly photo‐responsive and fluorescent cellulose nanoparticles. Most significantly, the installed coumarin and/or anthracene side‐chains were shown to undergo UV‐induced [2+2] and [4+4] cycloaddition reactions, bringing and locking the cellulose nanocrystals together. This effort paves the way towards creating, cellulosic photo responsive nano‐arrays with the potential of photo reversibility since these reactions are known to be reversible at varying wavelengths.

  5. Method of making alkyl esters

    Science.gov (United States)

    Elliott, Brian

    2010-09-14

    Methods of making alkyl esters are described herein. The methods are capable of using raw, unprocessed, low-cost feedstocks and waste grease. Generally, the method involves converting a glyceride source to a fatty acid composition and esterifying the fatty acid composition to make alkyl esters. In an embodiment, a method of making alkyl esters comprises providing a glyceride source. The method further comprises converting the glyceride source to a fatty acid composition comprising free fatty acids and less than about 1% glyceride by mass. Moreover, the method comprises esterifying the fatty acid composition in the presence of a solid acid catalyst at a temperature ranging firm about 70.degree. C. to about 120.degree. C. to produce alkyl esters, such that at least 85% of the free fatty acids are converted to alkyl esters. The method also incorporates the use of packed bed reactors for glyceride conversion and/or fatty acid esterification to make alkyl esters.

  6. The cellulose resource matrix.

    Science.gov (United States)

    Keijsers, Edwin R P; Yılmaz, Gülden; van Dam, Jan E G

    2013-03-01

    The emerging biobased economy is causing shifts from mineral fossil oil based resources towards renewable resources. Because of market mechanisms, current and new industries utilising renewable commodities, will attempt to secure their supply of resources. Cellulose is among these commodities, where large scale competition can be expected and already is observed for the traditional industries such as the paper industry. Cellulose and lignocellulosic raw materials (like wood and non-wood fibre crops) are being utilised in many industrial sectors. Due to the initiated transition towards biobased economy, these raw materials are intensively investigated also for new applications such as 2nd generation biofuels and 'green' chemicals and materials production (Clark, 2007; Lange, 2007; Petrus & Noordermeer, 2006; Ragauskas et al., 2006; Regalbuto, 2009). As lignocellulosic raw materials are available in variable quantities and qualities, unnecessary competition can be avoided via the choice of suitable raw materials for a target application. For example, utilisation of cellulose as carbohydrate source for ethanol production (Kabir Kazi et al., 2010) avoids the discussed competition with easier digestible carbohydrates (sugars, starch) deprived from the food supply chain. Also for cellulose use as a biopolymer several different competing markets can be distinguished. It is clear that these applications and markets will be influenced by large volume shifts. The world will have to reckon with the increase of competition and feedstock shortage (land use/biodiversity) (van Dam, de Klerk-Engels, Struik, & Rabbinge, 2005). It is of interest - in the context of sustainable development of the bioeconomy - to categorize the already available and emerging lignocellulosic resources in a matrix structure. When composing such "cellulose resource matrix" attention should be given to the quality aspects as well as to the available quantities and practical possibilities of processing the

  7. Structure of cellulose acetobacter xylinum

    International Nuclear Information System (INIS)

    The data are presented on optimization of cellulose synthesis by Acetobacter xylinum (strain VKM V-880) and the structural characteristics of A. xylinum cellulose gel film synthesized during static cultivation. The structural changes caused by the removal of water from gel films are established and the structural organization of macromolecular chains in cellulose A. xylinum is studied

  8. Cellulose Microfibril Formation by Surface-Tethered Cellulose Synthase Enzymes.

    Science.gov (United States)

    Basu, Snehasish; Omadjela, Okako; Gaddes, David; Tadigadapa, Srinivas; Zimmer, Jochen; Catchmark, Jeffrey M

    2016-02-23

    Cellulose microfibrils are pseudocrystalline arrays of cellulose chains that are synthesized by cellulose synthases. The enzymes are organized into large membrane-embedded complexes in which each enzyme likely synthesizes and secretes a β-(1→4) glucan. The relationship between the organization of the enzymes in these complexes and cellulose crystallization has not been explored. To better understand this relationship, we used atomic force microscopy to visualize cellulose microfibril formation from nickel-film-immobilized bacterial cellulose synthase enzymes (BcsA-Bs), which in standard solution only form amorphous cellulose from monomeric BcsA-B complexes. Fourier transform infrared spectroscopy and X-ray diffraction techniques show that surface-tethered BcsA-Bs synthesize highly crystalline cellulose II in the presence of UDP-Glc, the allosteric activator cyclic-di-GMP, as well as magnesium. The cellulose II cross section/diameter and the crystal size and crystallinity depend on the surface density of tethered enzymes as well as the overall concentration of substrates. Our results provide the correlation between cellulose microfibril formation and the spatial organization of cellulose synthases. PMID:26799780

  9. CHARACTERIZATION OF REGENERATED CELLULOSE MEMBRANES HYDROLYZED FROM CELLULOSE ACETATE

    Institute of Scientific and Technical Information of China (English)

    Yun Chen; Xiao-peng Xiong; Guang Yang; Li-na Zhang; Sen-lin Lei; Hui Lianga

    2002-01-01

    A series of cellulose acetate membranes were prepared by using formamide as additive, and then were hydrolyzedin 4 wt% aqueous NaOH solution for 8 h to obtain regenerated cellulose membranes. The dependence of degree ofsubstitution, structure, porous properties, solubility and thermal stability on hydrolysis time was studied by chemical titration,Fourier transform infrared spectroscopy, scanning electron microscopy, wide-angle X-ray diffraction, and differentialscanning calorimetry, respectively. The results indicated that the pore size of the regenerated cellulose membranes wasslightly smaller than that of cellulose acetate membrane, while solvent-resistance, crystallinity and thermostability weresignificantly improved. This work provides a simple way to prepare the porous cellulose membranes, which not only kept thegood pore characteristics of cellulose acetate membranes, but also possessed solvent-resistance, high crystallinity andthermostability. Therefore, the application range of cellulose acetate membranes can be expanded.

  10. Degradation of cellulose in irradiated wood and purified celluloses

    International Nuclear Information System (INIS)

    The degradation of cellulose chains in Pinus radiata and Eucalyptus regnans given small gamma-radiation doses has been studied. Scission yields showed marked dose-dependency effects, of which some appear to be due to an inherent dose-dependency exhibited by cellulose itself, and others indicate a protective action of some natural wood constituents. A uniform treatment of viscometry data reported by various workers who have studied radiation-induced degradation of purified cellulose materials, has been used to enable their scission results to be compared with each other and with those for natural wood cellulose of various dose levels. Generally, cellulose in wood is less degraded by radiation than is purified cellulose. However, with Eucalyptus regnans remarkably high scission yields, significantly higher than expected for purified cellulose, were observed at dose levels of 0.5-1.0 x 104Gy. The relevance of these results to changes in pulp yield following irradiation of wood chips, is briefly discussed. (author)

  11. The cellulose resource matrix

    NARCIS (Netherlands)

    Keijsers, E.R.P.; Yilmaz, G.; Dam, van J.E.G.

    2013-01-01

    The emerging biobased economy is causing shifts from mineral fossil oil based resources towards renewable resources. Because of market mechanisms, current and new industries utilising renewable commodities, will attempt to secure their supply of resources. Cellulose is among these commodities, where

  12. Cysticercosis cellulose cutis

    Directory of Open Access Journals (Sweden)

    Inamadar Arun

    2001-01-01

    Full Text Available A woman aged 30 years with solitary lesion of cysticercosis cellulose cutis is reported. Cutaneous cysticerci are often a pointer to the involvement of internal organs. Our patient was a pure vegetarian so, probable mode of infection may be ingestion of contaminated vegetables, where the practice of using pig feces as manure is prevalent.

  13. Derivatives of Oxidized Cellulose

    Czech Academy of Sciences Publication Activity Database

    Taubner, T.; Sobek, Jiří; Havelka, P.; Kvasnička, F.; Synytsya, A.; Čopíková, J.

    Praha : Česká společnost chemická, 2009, s. 777. ISSN 0009-2770. [International Conference on Polysaccharides-Glycoscience 2009 /5./. Praha (CZ), 11.11.2009-13.11.2009] Institutional research plan: CEZ:AV0Z40720504 Keywords : cellulose * reaction progress * chromatography Subject RIV: CI - Industrial Chemistry, Chemical Engineering

  14. Sintesis Metil Ester Sulfonat Dari Asam Stearat Dan Metil Ester Sulfonat Dari Asam Oleat

    OpenAIRE

    Samosir, Yustina

    2011-01-01

    The Synthesis of Methyl Ester Sulfonate (MES) from stearic acid and from oleic acid through the stages of esterification reaction, that are esterification from stearic acid and oleic acid that forms methyl ester stearic acid and methyl ester oleic acid next stage was sulfonating the two of methyl esters to form a methyl ester sulfonate stearic acid and methyl ester oleic acid sulfonate. Furthermore, both fatty acid methyl ester sulfonate is neutralized with NaOH to obtain sulfonate salt. ...

  15. Synthesis and characterization of cellulose derivatives obtained from bacterial cellulose

    International Nuclear Information System (INIS)

    The chemical modification of cellulose leads to production of derivatives with different properties from those observed for the original cellulose, for example, increased solubility in more traditional solvents. In this work we synthesized four derivatives of cellulose: microcrystalline cellulose, cellulose acetate, methylcellulose and carboxymethylcellulose using bacterial cellulose as a source. These were characterized in terms of chemical and structural changes by examining the degree of substitution (DS), infrared spectroscopy (FTIR) and nuclear magnetic resonance spectroscopy - NMR 13C. The molecular weight and degree of polymerization were evaluated by viscometry. The characterization of the morphology of materials and thermal properties were performed with the techniques of X-ray diffraction, electron microscopy images, differential scanning calorimetry (DSC) and thermogravimetric analysis. (author)

  16. Interactions of microfibrillated cellulose and cellulosic fines with cationic polyelectrolytes

    OpenAIRE

    Taipale, Tero

    2010-01-01

    The overall aim of this work was to produce and characterize different types of cellulosic fines and microfibrillated cellulose; to study their interactions with high molar mass cationic polyelectrolytes; and to demonstrate novel examples of their utilization. The work was performed, and its results discussed mainly from papermaking point of view, but the results are also well applicable in other fields of industry. Cellulosic fines are an essential component of papermaking fiber suspens...

  17. Novel oil resistant cellulosic materials

    OpenAIRE

    Aulin, Christian

    2009-01-01

    The aim of this study has been to prepare and characterise oil resistant cellulosic materials, ranging from model surfaces to papers and aerogels. The cellulosic materials were made oil resistant by chemical and topographic modifications, based on surface energy, surface roughness and barrier approaches. Detailed wetting studies of the prepared cellulosic materials were made using contact angle measurements and standardised penetration tests with different alkanes and oil mixtures. A signific...

  18. Cellulose biogenesis in Dictyostelium discoideum

    Energy Technology Data Exchange (ETDEWEB)

    Blanton, R.L.

    1993-12-31

    Organisms that synthesize cellulose can be found amongst the bacteria, protistans, fungi, and animals, but it is in plants that the importance of cellulose in function (as the major structural constituent of plant cell walls) and economic use (as wood and fiber) can be best appreciated. The structure of cellulose and its biosynthesis have been the subjects of intense investigation. One of the most important insights gained from these studies is that the synthesis of cellulose by living organisms involves much more than simply the polymerization of glucose into a (1{r_arrow}4)-{beta}-linked polymer. The number of glucoses in a polymer (the degree of polymerization), the crystalline form assumed by the glucan chains when they crystallize to form a microfibril, and the dimensions and orientation of the microfibrils are all subject to cellular control. Instead of cellulose biosynthesis, a more appropriate term might be cellulose biogenesis, to emphasize the involvement of cellular structures and mechanisms in controlling polymerization and directing crystallization and deposition. Dictyostelium discoideum is uniquely suitable for the study of cellulose biogenesis because of its amenability to experimental study and manipulation and the extent of our knowledge of its basic cellular mechanisms (as will be evident from the rest of this volume). In this chapter, I will summarize what is known about cellulose biogenesis in D. discoideum, emphasizing its potential to illuminate our understanding both of D. discoideum development and plant cellulose biogenesis.

  19. ACCESSIBILITY AND CRYSTALLINITY OF CELLULOSE

    Directory of Open Access Journals (Sweden)

    Michael Ioelovich

    2009-08-01

    Full Text Available The accessibility of cellulose samples having various degrees of crystallinity was studied with respect to molecules of water, lower primary alcohols, and lower organic acids. It was found that small water molecules have full access to non-crystalline domains of cellulose (accessibility coefficient α = 1. Molecules of the lowest polar organic liquids (methanol, ethanol, and formic acid have partial access into the non-crystalline domains (α<1, and with increasing diameter of the organic molecules their accessibility to cellulose structure decreases. Accessibility of cellulose samples to molecules of various substances is a linear function of the coefficient α and the content of non-crystalline domains. The relationship between crystallinity (X and accessibility (A of cellulose to molecules of some liquids has been established as A = α (1-X. The water molecules were found to have greater access to cellulose samples than the molecules of the investigated organic liquids. The obtained results permit use of accessibility data to estimate the crystallinity of cellulose, to examine the structural state of non-crystalline domains, and to predict the reactivity of cellulose samples toward some reagents.

  20. TEMPO-oxidized cellulose nanofibers

    Science.gov (United States)

    Isogai, Akira; Saito, Tsuguyuki; Fukuzumi, Hayaka

    2011-01-01

    Native wood celluloses can be converted to individual nanofibers 3-4 nm wide that are at least several microns in length, i.e. with aspect ratios >100, by TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl radical)-mediated oxidation and successive mild disintegration in water. Preparation methods and fundamental characteristics of TEMPO-oxidized cellulose nanofibers (TOCN) are reviewed in this paper. Significant amounts of C6 carboxylate groups are selectively formed on each cellulose microfibril surface by TEMPO-mediated oxidation without any changes to the original crystallinity (~74%) or crystal width of wood celluloses. Electrostatic repulsion and/or osmotic effects working between anionically-charged cellulose microfibrils, the ζ-potentials of which are approximately -75 mV in water, cause the formation of completely individualized TOCN dispersed in water by gentle mechanical disintegration treatment of TEMPO-oxidized wood cellulose fibers. Self-standing TOCN films are transparent and flexible, with high tensile strengths of 200-300 MPa and elastic moduli of 6-7 GPa. Moreover, TOCN-coated poly(lactic acid) films have extremely low oxygen permeability. The new cellulose-based nanofibers formed by size reduction process of native cellulose fibers by TEMPO-mediated oxidation have potential application as environmentally friendly and new bio-based nanomaterials in high-tech fields.

  1. Cellulose Synthesis in Agrobacterium tumefaciens

    Energy Technology Data Exchange (ETDEWEB)

    Alan R. White; Ann G. Matthysse

    2004-07-31

    We have cloned the celC gene and its homologue from E. coli, yhjM, in an expression vector and expressed the both genes in E. coli; we have determined that the YhjM protein is able to complement in vitro cellulose synthesis by extracts of A. tumefaciens celC mutants, we have purified the YhjM protein product and are currently examining its enzymatic activity; we have examined whole cell extracts of CelC and various other cellulose mutants and wild type bacteria for the presence of cellulose oligomers and cellulose; we have examined the ability of extracts of wild type and cellulose mutants including CelC to incorporate UDP-14C-glucose into cellulose and into water-soluble, ethanol-insoluble oligosaccharides; we have made mutants which synthesize greater amounts of cellulose than the wild type; and we have examined the role of cellulose in the formation of biofilms by A. tumefaciens. In addition we have examined the ability of a putative cellulose synthase gene from the tunicate Ciona savignyi to complement an A. tumefaciens celA mutant. The greatest difference between our knowledge of bacterial cellulose synthesis when we started this project and current knowledge is that in 1999 when we wrote the original grant very few bacteria were known to synthesize cellulose and genes involved in this synthesis were sequenced only from Acetobacter species, A. tumefaciens and Rhizobium leguminosarum. Currently many bacteria are known to synthesize cellulose and genes that may be involved have been sequenced from more than 10 species of bacteria. This additional information has raised the possibility of attempting to use genes from one bacterium to complement mutants in another bacterium. This will enable us to examine the question of which genes are responsible for the three dimensional structure of cellulose (since this differs among bacterial species) and also to examine the interactions between the various proteins required for cellulose synthesis. We have carried out one

  2. Ultrasonic dyeing of cellulose nanofibers.

    Science.gov (United States)

    Khatri, Muzamil; Ahmed, Farooq; Jatoi, Abdul Wahab; Mahar, Rasool Bux; Khatri, Zeeshan; Kim, Ick Soo

    2016-07-01

    Textile dyeing assisted by ultrasonic energy has attained a greater interest in recent years. We report ultrasonic dyeing of nanofibers for the very first time. We chose cellulose nanofibers and dyed with two reactive dyes, CI reactive black 5 and CI reactive red 195. The cellulose nanofibers were prepared by electrospinning of cellulose acetate (CA) followed by deacetylation. The FTIR results confirmed complete conversion of CA into cellulose nanofibers. Dyeing parameters optimized were dyeing temperature, dyeing time and dye concentrations for each class of the dye used. Results revealed that the ultrasonic dyeing produced higher color yield (K/S values) than the conventional dyeing. The color fastness test results depicted good dye fixation. SEM analysis evidenced that ultrasonic energy during dyeing do not affect surface morphology of nanofibers. The results conclude successful dyeing of cellulose nanofibers using ultrasonic energy with better color yield and color fastness results than conventional dyeing. PMID:26964959

  3. Green route to modification of wood waste, cellulose and hemicellulose using reactive extrusion.

    Science.gov (United States)

    Vaidya, Alankar A; Gaugler, Marc; Smith, Dawn A

    2016-01-20

    A large volume of wood waste is produced in timber processing industry which traditionally used in low value applications. Here, value addition to the wood waste (Sander dust) and cellulose, hemicellulose isolated thereof by functionalisation using cyclic anhydrides in a solvent-free and green reactive extrusion process is reported. The effect of extrusion temperature, catalyst and different weight ratios of Sander dust (SD):succinic anhydride (SA) on the esterification reaction is evaluated. The esterified products were characterised by the acid value, degree of substitution (DS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), solid state (13)C NMR and thermo-gravimetric analysis (TGA). Under optimum extrusion conditions, mixed esters are formed, with highest acid value obtained for succinylation of cellulose (0.122 g/g at DS of 0.350) which is two times higher compared to succinylated SD (0.059 g/g at a weight gain of 0.452) and hemicellulose (0.043 g/g at DS of 0.290). The reactivity trend for individual anhydride was: (1) SA-Cellulose>SD>hemicellulose; (2) maleic anhydride (MA)-SD>hemicellulose>cellulose and (3) dodecenyl succinic anhydride (DDSA)-SD ≈ cellulose ≫ hemicellulose. The pendant free carboxyl groups generated through functionalisation of wood waste, cellulose and hemicellulose without the presence of polymeric carriers will allow more tailored or targeted modification of wood-plastic composites. PMID:26572467

  4. Enhanced washing durability of hydrophobic coating on cellulose fabric using polycarboxylic acids

    International Nuclear Information System (INIS)

    Nine polycarboxylic acids were used to improve washing durability of hydrophobic cellulose fabric finished by sol-gel method. By simultaneous forming ester-bridge between cellulose and silica layer by ester bond, polycarboxylic acids could anchor silica coating onto cellulose fabric to strengthen the adhesion of organic-inorganic hybrid coating. The wettability of treated fabrics was characterized by water contact angle, spray test and hydrostatic pressure test. The results showed that all investigated polycarboxylic acids could improve the durability. The polycarboxylic acid with proper distance between terminal carboxylic acid groups and number of carboxylic acid groups showed the highest durability. 1,2,3,4-butanetetracarboxylic acid (BTCA) led to the best durability of hydrophobic cellulose fabric with water contact angle of 137.6o (recovery percentage of 94.2%) after 30 washing times. The effect of BTCA on durability was characterized by scanning electron microscopy. This study demonstrated that the surface treatment using polycarboxylic acids and mixed organosilanes is a promising alternative for achieving durable hydrophobic fabrics.

  5. Environmental effect of rapeseed oil ethyl ester

    International Nuclear Information System (INIS)

    Exhaust emission tests were conducted on rapeseed oil methyl ester (RME), rapeseed oil ethyl ester (REE) and fossil diesel fuel as well as on their mixtures. Results showed that when considering emissions of nitrogen oxides (NOx), carbon monoxide (CO) and smoke density, rapeseed oil ethyl ester had less negative effect on the environment in comparison with that of rapeseed oil methyl ester. When fuelled with rapeseed oil ethyl ester, the emissions of NOx showed an increase of 8.3% over those of fossil diesel fuel. When operated on 25-50% bio-ester mixed with fossil diesel fuel, NOx emissions marginally decreased. When fuelled with pure rapeseed oil ethyl ester, HC emissions decreased by 53%, CO emissions by 7.2% and smoke density 72.6% when compared with emissions when fossil diesel fuel was used. Carbon dioxide (CO2) emissions, which cause greenhouse effect, decreased by 782.87 g/kWh when rapeseed oil ethyl ester was used and by 782.26 g/kWh when rapeseed oil methyl ester was used instead of fossil diesel fuel. Rapeseed oil ethyl ester was more rapidly biodegradable in aqua environment when compared with rapeseed oil methyl ester and especially with fossil diesel fuel. During a standard 21 day period, 97.7% of rapeseed oil methyl ester, 98% of rapeseed oil ethyl ester and only 61.3% of fossil diesel fuel were biologically decomposed. (author)

  6. Avocado and olive oil methyl esters

    International Nuclear Information System (INIS)

    Biodiesel, the mono-alkyl esters of vegetable oils, animal fats or other triacylglycerol-containing materials and an alternative to conventional petroleum-based diesel fuel, has been derived from a variety of feedstocks. Numerous feedstocks have been investigated as potential biodiesel sources, including commodity oils, however, the methyl esters of avocado and olive oil would likely be suitable as biodiesel fuel. In order to expand the database and comprehensive evaluation of the properties of vegetable oil esters, in this work the fuel-related properties of avocado and olive oil methyl esters, which exhibit similar fatty acid profiles including high oleic acid content, are determined. The cetane numbers of avocado oil methyl esters and olive oil methyl esters are relatively high, determined as 59.2 and 62.5, respectively, due to their elevated content of methyl oleate. Other properties are well within the ranges specified in biodiesel standards. The cloud points of both esters are slightly above 0 °C due to their content of saturated esters, especially methyl palmitate. Overall, avocado and olive oil yield methyl esters with fuel properties comparable to methyl esters from other commodity vegetable oils. The 1H and 13C NMR spectra of avocado and olive oil methyl esters are reported. -- Highlights: • Methyl esters of avocado and olive oil meet biodiesel fuel standards. • Provides comparison for methyl esters of other vegetable oils with high oleic content. • Discusses and compares present results with prior literature

  7. Cellulose Derivatives for Water Repellent Properties

    Science.gov (United States)

    In this poster presentation, we will discuss the synthesis and structural characterizations of nitro-benzyl cellulose (1), amino-benzyl cellulose (2) and pentafluoro –benzyl cellulose (3). All cellulose derivatives are synthesized by etherification process in lithium chloride/N,N-dimethylacetamide h...

  8. Cellulose nanocrystals: synthesis, functional properties, and applications

    OpenAIRE

    George J.; Sabapathi SN

    2015-01-01

    Johnsy George, SN Sabapathi Food Engineering and Packaging Division, Defence Food Research Laboratory, Siddarthanagar, Mysore, Karnataka, India Abstract: Cellulose nanocrystals are unique nanomaterials derived from the most abundant and almost inexhaustible natural polymer, cellulose. These nanomaterials have received significant interest due to their mechanical, optical, chemical, and rheological properties. Cellulose nanocrystals primarily obtained from naturally occurring cellulose fibers...

  9. Cellulose synthase complexes: structure and regulation

    Directory of Open Access Journals (Sweden)

    Lei eLei

    2012-04-01

    Full Text Available This review is to update the most recent progress on characterization of the composition, regulation, and trafficking of cellulose synthase complexes. We will highlight proteins that interact with cellulose synthases, e.g. cellulose synthase-interactive protein 1 (CSI1. The potential regulation mechanisms by which cellulose synthase interact with cortical microtubules in primary cell walls will be discussed.

  10. Radiation degradation of cellulose

    International Nuclear Information System (INIS)

    The application of straw and other cellulose polymers as feedstuff for ruminants is limited by its low digestibility. During recent decades it was attempted to increase the digestibility of straw by several chemical and physical methods. In this work some results of the degradation of gamma and electron treated wheat straw are reported. Complex methods of treatment (e.g. radiation influence and influence of lyes) are taken into consideration. In vitro-experiments with radiation treated straw show that the digestibility can be increased from 20% up to about 80%. A high pressure liquid chromatography method was used to analyze the hydrolysates. The contents of certain species of carbohydrates in the hydrolysates in dependence on the applied dose are given

  11. Thermophilic degradation of cellulosic biomass

    Science.gov (United States)

    Ng, T.; Zeikus, J. G.

    1982-12-01

    The conversion of cellulosic biomass to chemical feedstocks and fuel by microbial fermentation is an important objective of developing biotechnology. Direct fermentation of cellulosic derivatives to ethanol by thermophilic bacteria offers a promising approach to this goal. Fermentations at elevated temperatures lowers the energy demand for cooling and also facilitates the recovery of volatile products. In addition, thermophilic microorganisms possess enzymes with greater stability than those from mesophilic microorganisms. Three anaerobic thermophilic cocultures that ferment cellulosic substrate mainly to ethanol have been described: Clostridium thermocellum/Clostriidium thermohydrosulfuricum, C. thermocellum/Clostridium thermosaccharolyticum, and C. thermocellum/Thermoanaerobacter ethanolicus sp. nov. The growth characteristics and metabolic features of these cocultures are reviewed.

  12. Synthesis of substituted 2-cyanoarylboronic esters

    DEFF Research Database (Denmark)

    Lysén, Morten; Hansen, Henriette M; Begtrup, Mikael; Kristensen, Jesper L

    2006-01-01

    The synthesis of substituted 2-cyanoarylboronic esters is described via lithiation/in situ trapping of the corresponding methoxy-, trifluoromethyl-, fluoro-, chloro-, and bromobenzonitriles. The crude arylboronic esters were obtained in high yields and purities and with good regioselectivities....

  13. Characterization of Cellulose Synthesis in Plant Cells

    OpenAIRE

    Samaneh Sadat Maleki; Kourosh Mohammadi; Kong-shu Ji

    2016-01-01

    Cellulose is the most significant structural component of plant cell wall. Cellulose, polysaccharide containing repeated unbranched β (1-4) D-glucose units, is synthesized at the plasma membrane by the cellulose synthase complex (CSC) from bacteria to plants. The CSC is involved in biosynthesis of cellulose microfibrils containing 18 cellulose synthase (CesA) proteins. Macrofibrils can be formed with side by side arrangement of microfibrils. In addition, beside CesA, various proteins like the...

  14. Biodiesel With Optimized Fatty Ester Composition

    Science.gov (United States)

    Biodiesel is largely composed of the mono-alkyl esters, usually methyl esters, of vegetable oils or animal fats with its fatty acid profile corresponding to that of the parent oil or fat. The different fatty esters have varying properties of relevance to biodiesel. The feedstock-dependent variatio...

  15. Chromophores in lignin-free cellulosic materials belong to three compound classes. Chromophores in cellulosics, XII

    Science.gov (United States)

    The CRI (chromophore release and identification) method isolates well-defined chromophoric substances from different cellulosic matrices, such as highly bleached pulps, cotton linters, bacterial cellulose, viscose or lyocell fibers, and cellulose acetates. The chromophores are present only in extrem...

  16. Bacterial cellulose/boehmite composites

    Energy Technology Data Exchange (ETDEWEB)

    Salvi, Denise T.B. de; Barud, Hernane S.; Messaddeq, Younes; Ribeiro, Sidney J.L. [Universidade Estadual Paulista Julio de Mesquita Filho. UNESP. Instituto de Quimica de Araraquara, SP (Brazil); Caiut, Jose Mauricio A. [Universidade de Sao Paulo. Departamento de Quimica - FFCLRP/USP, Ribeirao Preto, SP (Brazil)

    2011-07-01

    Composites based on bacterial cellulose membranes and boehmite were obtained. SEM results indicate that the bacterial cellulose (BC) membranes are totally covered by boehmite and obtained XRD patterns suggest structural changes due to this boehmite addition. Thermal stability is accessed through TG curves and is dependent on boehmite content. Transparency is high comparing to pure BC as can be seen through UV-vis absorption spectroscopy. (author)

  17. Bacterial cellulose/boehmite composites

    International Nuclear Information System (INIS)

    Composites based on bacterial cellulose membranes and boehmite were obtained. SEM results indicate that the bacterial cellulose (BC) membranes are totally covered by boehmite and obtained XRD patterns suggest structural changes due to this boehmite addition. Thermal stability is accessed through TG curves and is dependent on boehmite content. Transparency is high comparing to pure BC as can be seen through UV-vis absorption spectroscopy. (author)

  18. Cellulose biosynthesis in Acetobacter xylinum

    International Nuclear Information System (INIS)

    Time-lapse video microscopy has shown periodic reversals during the synthesis of cellulose. In the presence of Congo Red, Acetobacter produces a band of fine fibrils. The direction of cell movement is perpendicular to the longitudinal axis of cell, and the rate of movement was decreased. A linear row of particles, presumably the cellulose synthesizing complexes, was found on the outer membrane by freeze-fracture technique. During the cell cycle, the increase of particles in linear row, the differentiation to four linear rows and the separation of the linear rows have been observed. A digitonin-solubilized cellulose synthase was prepared from A. xylinum, and incubated under conditions known to lead to active in vitro synthesis of 1,4-β-D-glucan polymer. Electron microscopy revealed that clusters of fibrils were assembled within minutes. Individual fibrils are 17 ± 2 angstroms in diameter. Evidence for the cellulosic composition of newly synthesized fibrils was based on incorporation of tritium from UDP-[3H] glucose binding of gold-labeled cellobiohydrolase, and an electron diffraction pattern identified as cellulose II polymorph instead of cellulose I

  19. Opportunity for profitable investments in cellulosic biofuels

    International Nuclear Information System (INIS)

    Research efforts to allow large-scale conversion of cellulose into biofuels are being undertaken in the US and EU. These efforts are designed to increase logistic and conversion efficiencies, enhancing the economic competitiveness of cellulosic biofuels. However, not enough attention has been paid to the future market conditions for cellulosic biofuels, which will determine whether the necessary private investment will be available to allow a cellulosic biofuels industry to emerge. We examine the future market for cellulosic biofuels, differentiating between cellulosic ethanol and 'drop-in' cellulosic biofuels that can be transported with petroleum fuels and have equivalent energy values. We show that emergence of a cellulosic ethanol industry is unlikely without costly government subsidies, in part because of strong competition from conventional ethanol and limits on ethanol blending. If production costs of drop-in cellulosic biofuels fall enough to become competitive, then their expansion will not necessarily cause feedstock prices to rise. As long as local supplies of feedstocks that have no or low-valued alternative uses exist, then expansion will not cause prices to rise significantly. If cellulosic feedstocks come from dedicated biomass crops, then the supply curves will have a steeper slope because of competition for land. - Research highlights: → The likelihood of a significant cellulosic ethanol industry in the US looks dim. → Drop-in biofuels made from cellulosic feedstocks have a more promising future. → The spatial dimension of markets for cellulosic feedstocks will be limited. → Corn ethanol will be a tough competitor for cellulosic ethanol.

  20. A thermodynamic investigation of the cellulose allomorphs: Cellulose(am), cellulose Iβ(cr), cellulose II(cr), and cellulose III(cr)

    International Nuclear Information System (INIS)

    Highlights: • Cellulose allomorphs were prepared and carefully characterized. • Measurements by oxygen bomb calorimetry, solution calorimetry, and by PPMS. • Thermodynamic properties for interconversion reactions of the cellulose allomorphs. • Review of the earlier literature with recalculation of property values. • Standard thermodynamic formation properties. - Abstract: The thermochemistry of samples of amorphous cellulose, cellulose I, cellulose II, and cellulose III was studied by using oxygen bomb calorimetry, solution calorimetry in which the solvent was cadoxen (a cadmium ethylenediamine solvent), and with a Physical Property Measurement System (PPMS) in zero magnetic field to measure standard massic heat capacities Cp,w∘ over the temperature range T = (2 to 302) K. The samples used in this study were prepared so as to have different values of crystallinity indexes CI and were characterized by X-ray diffraction, by Karl Fischer moisture determination, and by using gel permeation chromatography to determine the weight average degree of polymerization DPw. NMR measurements on solutions containing the samples dissolved in cadoxen were also performed in an attempt to resolve the issue of the equivalency or non-equivalency of the nuclei in the different forms of cellulose that were dissolved in cadoxen. While large differences in the NMR spectra for the various cellulose samples in cadoxen were not observed, one cannot be absolutely certain that these cellulose samples are chemically equivalent in cadoxen. Equations were derived which allow one to adjust measured property values of cellulose samples having a mass fraction of water wH2O to a reference value of the mass fraction of water wref. The measured thermodynamic properties (standard massic enthalpy of combustion ΔcHw∘, standard massic enthalpy of solution ΔsolHw∘, and Cp,w∘) were used in conjunction with the measured CI values to calculate values of the changes in the standard massic

  1. Overview of Methods for the Direct Molar Mass Determination of Cellulose.

    Science.gov (United States)

    Oberlerchner, Josua Timotheus; Rosenau, Thomas; Potthast, Antje

    2015-01-01

    The purpose of this article is to provide the reader with an overview of the methods used to determine the molecular weights of cellulose. Methods that employ direct dissolution of the cellulose polymer are described; hence methods for investigating the molecular weight of cellulose in derivatized states, such as ethers or esters, only form a minor part of this review. Many of the methods described are primarily of historical interest since they have no use in modern cellulose chemistry. However, older methods, such as osmometry or ultracentrifuge experiments, were the first analytical methods used in polymer chemistry and continue to serve as sources of fundamental information (such as the cellulose structure in solution). The first part of the paper reviews methods, either absolute or relative, for the estimation of average molecular weights. Regardless of an absolute or relative approach, the outcome is a molecular weight average (MWA). In the final section, coupling methods are described. The primary benefit of performing a pre-separation step on the molecules is the discovery of the molecular weight distribution (MWD). Here, size exclusion chromatography (SEC) is unquestionably the most powerful and most commonly-applied method in modern laboratories and industrial settings. PMID:26053488

  2. Overview of Methods for the Direct Molar Mass Determination of Cellulose

    Directory of Open Access Journals (Sweden)

    Josua Timotheus Oberlerchner

    2015-06-01

    Full Text Available The purpose of this article is to provide the reader with an overview of the methods used to determine the molecular weights of cellulose. Methods that employ direct dissolution of the cellulose polymer are described; hence methods for investigating the molecular weight of cellulose in derivatized states, such as ethers or esters, only form a minor part of this review. Many of the methods described are primarily of historical interest since they have no use in modern cellulose chemistry. However, older methods, such as osmometry or ultracentrifuge experiments, were the first analytical methods used in polymer chemistry and continue to serve as sources of fundamental information (such as the cellulose structure in solution. The first part of the paper reviews methods, either absolute or relative, for the estimation of average molecular weights. Regardless of an absolute or relative approach, the outcome is a molecular weight average (MWA. In the final section, coupling methods are described. The primary benefit of performing a pre-separation step on the molecules is the discovery of the molecular weight distribution (MWD. Here, size exclusion chromatography (SEC is unquestionably the most powerful and most commonly-applied method in modern laboratories and industrial settings.

  3. Enantiospecific Alkynylation of Alkylboronic Esters

    OpenAIRE

    Wang, Yahui; Noble, Adam; Myers, Eddie L.; Aggarwal, Varinder K.

    2016-01-01

    Enantioenriched secondary and tertiary alkyl pinacolboronic esters undergo enantiospecific deborylative alkynylation through a Zweifel-type alkenylation followed by a 1,2-elimination reaction. The process involves the use of α-lithio vinyl bromide or vinyl carbamate, species whose application to Zweifel-type reactions has not previously been explored. The resulting functionalized 1,1-disubstituted alkenes undergo facile base-mediated elimination to generate the terminal alkyne products in hig...

  4. Methods of making alkyl esters

    Science.gov (United States)

    Elliott, Brian

    2010-08-03

    A method comprising contacting an alcohol, a feed comprising one or more glycerides and equal to or greater than 2 wt % of one or more free fatty acids, and a solid acid catalyst, a nanostructured polymer catalyst, or a sulfated zirconia catalyst in one or more reactors, and recovering from the one or more reactors an effluent comprising equal to or greater than about 75 wt % alkyl ester and equal to or less than about 5 wt % glyceride.

  5. Sesquiterpene Esters from Salvia roborowskii

    Institute of Scientific and Technical Information of China (English)

    Ya LI; Ning LOU; Yan Qi WU; Xian Feng LIN; Yu LI

    2003-01-01

    Two new sesquiterpene esters, 3β, 6β, 8α-triacetyl-4β, 5α-epoxy -1- oxogermacr-10(14)-ene (1) and 3β, 6β, 8α-triacetyl-4β, 5α-epoxygermacr-1(10)-ene (2) were isolated from the whole plant of Salvia roborowskii Maxim. Their structures were elucidated by means of spectral data (2DNMR and HRMS).

  6. Photostable ester-substituted bis-cyclometalated cationic iridium(III) complexes for continuous monitoring of oxygen.

    Science.gov (United States)

    Liu, Chun; Yu, Hongcui; Xing, Yang; Gao, Zhanming; Jin, Zilin

    2016-01-14

    Three bis-cyclometalated cationic Ir(iii) complexes , and with an ester substituent at the 4-position of the phenyl ring on the 2-phenylpyridine (ppy) have been synthesized and fully characterized. The emission maxima of ester-substituted Ir(iii) complexes show a notable blue-shift compared to the parent complex [Ir(ppy)2(phen)](+)PF6(-) (phen = 1,10-phenanthroline). The influence of an ester group on the photoelectric properties of the Ir(iii) complexes has been investigated systematically. The oxygen sensing films prepared from ethyl cellulose immobilized with Ir(iii) complexes exhibit excellent operational stability, high photostability and a quick response to oxygen. show extended luminescence lifetimes relative to , and display better sensitivity to changes in oxygen partial pressure. PMID:26630292

  7. Microfibrillated cellulose: morphology and accessibility

    Energy Technology Data Exchange (ETDEWEB)

    Herrick, F.W.; Casebier, R.L.; Hamilton, J.K.; Sandberg, K.R.

    1983-01-01

    Microfibrillated cellulose (MFC) is prepared by subjecting dilute slurries of cellulose fibers to repeated high-pressure homogenizing action. A highly microfibrillated product will have a gel-like appearance at 2% concentration in water. Such gels have pseudoplastic viscosity properties and are very fluid when stirred at high shear rate. The relative viscosity of 2% MFC dispersions may be used as a measure of the degree of homogenization or microfibrillation of a given wood cellulose pulp. The water retention value of an MFC product can also be used as an indicator for degree of homogenization. Structurally, MFC appears to be a web of interconnected fibrils and microfibrils, the latter having diameters in the range 10-100 nm as observed in scanning and transmission electron micrographs. Chemical studies have revealed that MFC is only moderately degraded, while being greatly expanded in surface area. The accessibility of cellulose in MFC is only moderately degraded, while being greatly expanded in surface area. The accessibility of cellulose in MFC toward chemical reagents is greatly increased. Higher reactivity was demonstrated in dilute cupriethylenediamine solubility, triphenylmethylation, acetylation, periodate oxidation, and mineral acid and cellulase enzyme hydrolysis rates. 16 references, 8 figures, 7 tables.

  8. The cellulose synthase companion proteins act non-redundantly with CELLULOSE SYNTHASE INTERACTING1/POM2 and CELLULOSE SYNTHASE 6

    OpenAIRE

    Endler, Anne; Schneider, Rene; Kesten, Christopher; Edwin R Lampugnani; Persson, Staffan

    2016-01-01

    ABSTRACT Cellulose is a cell wall constituent that is essential for plant growth and development, and an important raw material for a range of industrial applications. Cellulose is synthesized at the plasma membrane by massive cellulose synthase (CesA) complexes that track along cortical microtubules in elongating cells of Arabidopsis through the activity of the protein CELLULOSE SYNTHASE INTERACTING1 (CSI1). In a recent study we identified another family of proteins that also are associated ...

  9. Microbial Cellulose Assembly in Microgravity

    Science.gov (United States)

    Brown, R. Malcolm, Jr.

    1998-01-01

    Based on evidence indicating a possible correlation between hypo-gravity conditions and alteration of cellulose production by the gram negative bacterium, Acetobacter xylinum, a ground-based study for a possible long term Space Shuttle flight has been conducted. The proposed experiment for A. xylinum aboard the Shuttle is the BRIC (Biological Research in a Canister), a metal container containing spaces for nine Petri plates. Using a common experimental design, the cellulose production capability as well as the survivability of the A. xylinum strains NQ5 and AY201 have been described. It should now be possible to use the BRIC for the first long term microgravity experiments involving the biosynthesis of cellulose.

  10. Characterization of Cellulose Synthesis in Plant Cells

    Directory of Open Access Journals (Sweden)

    Samaneh Sadat Maleki

    2016-01-01

    Full Text Available Cellulose is the most significant structural component of plant cell wall. Cellulose, polysaccharide containing repeated unbranched β (1-4 D-glucose units, is synthesized at the plasma membrane by the cellulose synthase complex (CSC from bacteria to plants. The CSC is involved in biosynthesis of cellulose microfibrils containing 18 cellulose synthase (CesA proteins. Macrofibrils can be formed with side by side arrangement of microfibrils. In addition, beside CesA, various proteins like the KORRIGAN, sucrose synthase, cytoskeletal components, and COBRA-like proteins have been involved in cellulose biosynthesis. Understanding the mechanisms of cellulose biosynthesis is of great importance not only for improving wood production in economically important forest trees to mankind but also for plant development. This review article covers the current knowledge about the cellulose biosynthesis-related gene family.

  11. Characterization of Cellulose Synthesis in Plant Cells.

    Science.gov (United States)

    Maleki, Samaneh Sadat; Mohammadi, Kourosh; Ji, Kong-Shu

    2016-01-01

    Cellulose is the most significant structural component of plant cell wall. Cellulose, polysaccharide containing repeated unbranched β (1-4) D-glucose units, is synthesized at the plasma membrane by the cellulose synthase complex (CSC) from bacteria to plants. The CSC is involved in biosynthesis of cellulose microfibrils containing 18 cellulose synthase (CesA) proteins. Macrofibrils can be formed with side by side arrangement of microfibrils. In addition, beside CesA, various proteins like the KORRIGAN, sucrose synthase, cytoskeletal components, and COBRA-like proteins have been involved in cellulose biosynthesis. Understanding the mechanisms of cellulose biosynthesis is of great importance not only for improving wood production in economically important forest trees to mankind but also for plant development. This review article covers the current knowledge about the cellulose biosynthesis-related gene family. PMID:27314060

  12. Steric Stabilization of “Charge-Free” Cellulose Nanowhiskers by Grafting of Poly(ethylene glycol

    Directory of Open Access Journals (Sweden)

    Jun Araki

    2014-12-01

    Full Text Available A sterically stabilized aqueous suspension of “charge-free” cellulose nanowhiskers was prepared by hydrochloric acid hydrolysis of cotton powders and subsequent surface grafting of monomethoxy poly(ethylene glycol (mPEG. The preparation scheme included carboxylation of the terminal hydroxyl groups in mPEG via oxidation with silica gel particles carrying 2,2,6,6-tetramethyl-1-pyperidinyloxyl (TEMPO moieties and subsequent esterification between terminal carboxyls in mPEG and surface hydroxyl groups of cellulose nanowhiskers, mediated by 1,1'-carbonyldiimidazole (CDI in dimethyl sulfoxide or dimethylacetamide. Some of the prepared PEG-grafted samples showed remarkable flow birefringence and enhanced stability after 24 h, even in 0.1 M NaCl, suggesting successful steric stabilization by efficient mPEG grafting. Actual PEG grafting via ester linkages was confirmed by attenuated total reflectance-Fourier transform infrared spectrometry. In a typical example, the amount of grafted mPEG was estimated as ca. 0.3 g/g cellulose by two measurements, i.e., weight increase after grafting and weight loss after alkali cleavage of ester linkages. Transmission electron microscopy indicated unchanged nanowhisker morphology after mPEG grafting.

  13. Filtration properties of bacterial cellulose membranes

    OpenAIRE

    Lehtonen, Janika

    2015-01-01

    Bacterial cellulose has the same molecular formula as cellulose from plant origin, but it is characterized by several unique properties including high purity, crystallinity and mechanical strength. These properties are dependent on parameters such as the bacterial strain used, the cultivation conditions and post-growth processing. The possibility to achieve bacterial cellulose membranes with different properties by varying these parameters could make bacterial cellulose an interesting materi...

  14. Biocompatibility of Bacterial Cellulose Based Biomaterials

    OpenAIRE

    Omar P. Troncoso; Solene Commeaux; Torres, Fernando G.

    2012-01-01

    Some bacteria can synthesize cellulose when they are cultivated under adequate conditions. These bacteria produce a mat of cellulose on the top of the culture medium, which is formed by a three-dimensional coherent network of pure cellulose nanofibers. Bacterial cellulose (BC) has been widely used in different fields, such as the paper industry, electronics and tissue engineering due to its remarkable mechanical properties, conformability and porosity. Nanocomposites based on BC have received...

  15. A Molecular Description of Cellulose Biosynthesis

    OpenAIRE

    McNamara, Joshua T.; Morgan, Jacob L.W.; Zimmer, Jochen

    2015-01-01

    Cellulose is the most abundant biopolymer on Earth, and certain organisms from bacteria to plants and animals synthesize cellulose as an extracellular polymer for various biological functions. Humans have used cellulose for millennia as a material and an energy source, and the advent of a lignocellulosic fuel industry will elevate it to the primary carbon source for the burgeoning renewable energy sector. Despite the biological and societal importance of cellulose, the molecular mechanism by ...

  16. The trafficking and behavior of cellulose synthase and a glimpse of potential cellulose synthesis regulators

    Institute of Scientific and Technical Information of China (English)

    Logan BASHLINE; Juan DU; Ying GU

    2011-01-01

    Cellulose biosynthesis is a topic of intensive research not only due to the significance of cellulose in the integrity of plant cell walls,but also due to the potential of using cellulose,a natural carbon source,in the production ot biofuels.Characterization of the composition,regulation,and trafficking of cellulose synthase complexes (CSCs) is critical to an understanding of cellulose biosynthesis as well as the characterization of additional proteins that contribute to the production of cellulose either through direct interactions with CSCs or through indirect mechanisms.In this review,a highlight of a few proteins that appear to affect cellulose biosynthesis,which includes:KORRIGAN (KOR),Cellulose Synthase-Interactive Protein 1 (CSI1),and the poplar microtubule-associated protein,PttMAP20,will accompany a description of cellulose synthase (CESA) behavior and a discussion of CESA trafficking compartments that might act in the regulation of cellulose biosynthesis.

  17. Adsorption and desorption of cellulose derivatives.

    NARCIS (Netherlands)

    Hoogendam, C.W.

    1998-01-01

    Cellulose derivatives, in particular carboxymethyl cellulose (CMC) are used in many (industrial) applications. The aim of this work is to obtain insight into the adsorption mechanism of cellulose derivatives on solid-liquid interfaces.In chapter 1 of this thesis we discuss some appl

  18. Iodine catalyzed acetylation of starch and cellulose

    Science.gov (United States)

    Starch and cellulose, earth's most abundant biopolymers, are of tremendous economic importance. Over 90% of cotton and 50% of wood are made of cellulose. Wood and cotton are the major resources for all cellulose products such as paper, textiles, construction materials, cardboard, as well as such c...

  19. Bioengineering cellulose-hemicellulose networks in plants

    NARCIS (Netherlands)

    Obembe, O.

    2006-01-01

    The interactions between cellulose and hemicellulose in the cell walls are important in the industrial application of the cellulose (natural) fibres. We strive to modify these interactions (i) by interfering with cellulose biosynthesis and (ii) by direct interference of the

  20. Ester Tuiksoo. Proua Suhkru kibedad päevad / Ester Tuiksoo ; interv. Piret Tali

    Index Scriptorium Estoniae

    Tuiksoo, Ester, 1965-

    2005-01-01

    Põllumajandusminister Ester Tuiksoo, kellel peagi täitub ministri ametis aasta Euroopa Liidu suhkrutrahvist, maaettevõtlusest, põllumajandusest, Euroopa Liidu toetustest, ministri elu- ja teenistuskäigust. Lisa: Ester Tuiksoo

  1. Ionic Liquids and Cellulose: Dissolution, Chemical Modification and Preparation of New Cellulosic Materials

    Directory of Open Access Journals (Sweden)

    Mehmet Isik

    2014-07-01

    Full Text Available Due to its abundance and a wide range of beneficial physical and chemical properties, cellulose has become very popular in order to produce materials for various applications. This review summarizes the recent advances in the development of new cellulose materials and technologies using ionic liquids. Dissolution of cellulose in ionic liquids has been used to develop new processing technologies, cellulose functionalization methods and new cellulose materials including blends, composites, fibers and ion gels.

  2. Impact of Biofield Treatment on Chemical and Thermal Properties of Cellulose and Cellulose Acetate

    OpenAIRE

    Trivedi, Mahendra Kumar

    2015-01-01

    Cellulose being an excellent biopolymer has cemented its place firmly in many industries as a coating material, textile, composites, and biomaterial applications. In the present study, we have investigated the effect of biofield treatment on physicochemical properties of cellulose and cellulose acetate. The cellulose and cellulose acetate were exposed to biofield and further the chemical and thermal properties were investigated. X-ray diffraction study asserted that the biofield treatment did...

  3. Carboxylic Acid Esters as Substrates of Cholinesterases

    Science.gov (United States)

    Brestkin, A. P.; Rozengart, E. V.; Abduvakhabov, A. A.; Sadykov, A. A.

    1983-10-01

    Data on the kinetics of the hydrolysis of various carboxylic acid esters by two main types of cholinesterases — acetylcholinesterase from human erythrocytes and butyrylcholinesterase from horse blood serum — are surveyed. It is shown that the rate of enzyme hydrolysis depends significantly on the structure of the acyl part of the ester molecule, the nature of the ester heteroatom, the structure of the alcohol component, and particularly the structure of the onium group. Esters based on natural products are of special interest as specific substrates of these enzymes. The role of the productive and non-productive sorption of the substrates in enzyme catalysis is demonstrated. The bibliography includes 81 references.

  4. High performance cellulose nanocomposites: comparing the reinforcing ability of bacterial cellulose and nanofibrillated cellulose

    OpenAIRE

    Lee, K. Y.; Tammelin, T.; Schulfter, K.; Kiiskinen, H.; Samela, J.; Bismarck, A.

    2012-01-01

    This work investigates the surface and bulk properties of nanofibrillated cellulose (NFC) and bacterial cellulose (BC), as well as their reinforcing ability in polymer nanocomposites. BC possesses higher critical surface tension of 57 mN m(-1) compared to NFC (41 mN m(-1)). The thermal degradation temperature in both nitrogen and air atmosphere of BC was also found to be higher than that of NFC. These results are in good agreement with the higher crystallinity of BC as determined by XRD, meas...

  5. Development of carboxymethyl cellulose acrylate for various biomedical applications

    Science.gov (United States)

    Pal, Kunal; Banthia, A. K.; Majumdar, D. K.

    2006-06-01

    The purpose of this work is to prepare a pH-sensitive hydrogel membrane of sodium carboxymethyl cellulose acrylate for drug delivery and other biomedical applications. The hydrogel was made by esterification of sodium carboxymethyl cellulose (SCMC) and acryloyl chloride (ACl). The esterified product was characterized by FTIR spectroscopy and XRD. Swelling, hemocompatibility, water vapor transmission rate, contact angle and diffusional studies were also done. Biocompatibility of the membrane was established by quantification of cell growth of L929 cells and mice splenocytes. The FTIR spectrum of the hydrogel suggested the formation of ester bonds between the hydroxyl groups of sodium carboxymethyl cellulose and the carbonyl group of acryloyl chloride. Water vapor transmission rate, hemocompatibility, contact angle and swelling studies indicated that the hydrogel can be tried as a wound dressing material. The hydrogel showed pH-dependent swelling behavior arising from the acidic pendant group in the polymer network. The permeability of the hydrogel membrane produced, as shown by salicylic acid diffusion, increased in response to an increase in pH of the external medium. The hydrogel membrane was permeable to salicylic acid at pH 7.2 but not at pH 2.0 (0.01N HCl). The effect of changes of pH on the hydrogel's permeability was found to be reversible. The hydrogel membrane was found to be compatible with the L929 mice fibroblast cell line and mice splenocytes. The esterified product of SCMC and ACl swells on increase of pH indicating its possible use in a pH-sensitive drug delivery system and as a wound dressing material.

  6. Development of carboxymethyl cellulose acrylate for various biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Pal, Kunal [Materials Science Centre, Indian Institute of Technology, Kharagpur 721302 (India); Banthia, A K [Materials Science Centre, Indian Institute of Technology, Kharagpur 721302 (India); Majumdar, D K [Delhi Institute of Pharmaceutical Sciences and Research, Formerly College of Pharmacy, University of Delhi, Pushp Vihar, Sector III, New Delhi 110017 (India)

    2006-06-15

    The purpose of this work is to prepare a pH-sensitive hydrogel membrane of sodium carboxymethyl cellulose acrylate for drug delivery and other biomedical applications. The hydrogel was made by esterification of sodium carboxymethyl cellulose (SCMC) and acryloyl chloride (ACl). The esterified product was characterized by FTIR spectroscopy and XRD. Swelling, hemocompatibility, water vapor transmission rate, contact angle and diffusional studies were also done. Biocompatibility of the membrane was established by quantification of cell growth of L929 cells and mice splenocytes. The FTIR spectrum of the hydrogel suggested the formation of ester bonds between the hydroxyl groups of sodium carboxymethyl cellulose and the carbonyl group of acryloyl chloride. Water vapor transmission rate, hemocompatibility, contact angle and swelling studies indicated that the hydrogel can be tried as a wound dressing material. The hydrogel showed pH-dependent swelling behavior arising from the acidic pendant group in the polymer network. The permeability of the hydrogel membrane produced, as shown by salicylic acid diffusion, increased in response to an increase in pH of the external medium. The hydrogel membrane was permeable to salicylic acid at pH 7.2 but not at pH 2.0 (0.01N HCl). The effect of changes of pH on the hydrogel's permeability was found to be reversible. The hydrogel membrane was found to be compatible with the L929 mice fibroblast cell line and mice splenocytes. The esterified product of SCMC and ACl swells on increase of pH indicating its possible use in a pH-sensitive drug delivery system and as a wound dressing material.

  7. Development of carboxymethyl cellulose acrylate for various biomedical applications

    International Nuclear Information System (INIS)

    The purpose of this work is to prepare a pH-sensitive hydrogel membrane of sodium carboxymethyl cellulose acrylate for drug delivery and other biomedical applications. The hydrogel was made by esterification of sodium carboxymethyl cellulose (SCMC) and acryloyl chloride (ACl). The esterified product was characterized by FTIR spectroscopy and XRD. Swelling, hemocompatibility, water vapor transmission rate, contact angle and diffusional studies were also done. Biocompatibility of the membrane was established by quantification of cell growth of L929 cells and mice splenocytes. The FTIR spectrum of the hydrogel suggested the formation of ester bonds between the hydroxyl groups of sodium carboxymethyl cellulose and the carbonyl group of acryloyl chloride. Water vapor transmission rate, hemocompatibility, contact angle and swelling studies indicated that the hydrogel can be tried as a wound dressing material. The hydrogel showed pH-dependent swelling behavior arising from the acidic pendant group in the polymer network. The permeability of the hydrogel membrane produced, as shown by salicylic acid diffusion, increased in response to an increase in pH of the external medium. The hydrogel membrane was permeable to salicylic acid at pH 7.2 but not at pH 2.0 (0.01N HCl). The effect of changes of pH on the hydrogel's permeability was found to be reversible. The hydrogel membrane was found to be compatible with the L929 mice fibroblast cell line and mice splenocytes. The esterified product of SCMC and ACl swells on increase of pH indicating its possible use in a pH-sensitive drug delivery system and as a wound dressing material

  8. Production of bacterial cellulose from alternate feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    D. N. Thompson; M. A. Hamilton

    2000-05-07

    Production of bacterial cellulose by Acetobacter xylinum ATCC 10821 and 23770 in static cultures was tested from unamended food process effluents. Effluents included low- and high-solids potato effluents (LS and HS), cheese whey permeate (CW), and sugar beet raffinate (CSB). Strain 23770 produced 10% less cellulose from glucose than did 10821, and diverted more glucose to gluconate. Unamended HS, CW, and CSB were unsuitable for cellulose production by either strain, while LS was unsuitable for production by 10821. However, 23770 produced 17% more cellulose from LS than from glucose, indicating unamended LS could serve as a feedstock for bacterial cellulose.

  9. Production of Bacterial Cellulose from Alternate Feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, David Neil; Hamilton, Melinda Ann

    2000-05-01

    Production of bacterial cellulose by Acetobacter xylinum ATCC 10821 and 23770 in static cultures was tested from unamended food process effluents. Effluents included low- and high-solids potato effluents (LS & HS), cheese whey permeate (CW), and sugar beet raffinate (CSB). Strain 23770 produced 10% less cellulose from glucose than did 10821, and diverted more glucose to gluconate. Unamended HS, CW, and CSB were unsuitable for cellulose production by either strain, while LS was unsuitable for production by 10821. However, 23770 produced 17% more cellulose from LS than from glucose, indicating unamended LS could serve as a feedstock for bacterial cellulose.

  10. Cellulose nanomaterials in water treatment technologies.

    Science.gov (United States)

    Carpenter, Alexis Wells; de Lannoy, Charles-François; Wiesner, Mark R

    2015-05-01

    Cellulose nanomaterials are naturally occurring with unique structural, mechanical and optical properties. While the paper and packaging, automotive, personal care, construction, and textiles industries have recognized cellulose nanomaterials' potential, we suggest cellulose nanomaterials have great untapped potential in water treatment technologies. In this review, we gather evidence of cellulose nanomaterials' beneficial role in environmental remediation and membranes for water filtration, including their high surface area-to-volume ratio, low environmental impact, high strength, functionalizability, and sustainability. We make direct comparison between cellulose nanomaterials and carbon nanotubes (CNTs) in terms of physical and chemical properties, production costs, use and disposal in order to show the potential of cellulose nanomaterials as a sustainable replacement for CNTs in water treatment technologies. Finally, we comment on the need for improved communication and collaboration across the myriad industries invested in cellulose nanomaterials production and development to achieve an efficient means to commercialization. PMID:25837659

  11. Polymorphy in native cellulose: recent developments

    International Nuclear Information System (INIS)

    In a number of earlier studies, the authors developed a model of cellulose structure based on the existence of two stable, linearly ordered conformations of the cellulose chain that are dominant in celluloses I and II, respectively. The model rests on extensive Raman spectral observations together with conformational considerations and solid-state 13C-NMR studies. More recently, they have proposed, on the basis of high resolution solid-state 13C-NMR observations, that native celluloses are composites of two distinct crystalline forms that coexist in different proportions in all native celluloses. In the present work, they examine the Raman spectra of the native celluloses, and reconcile their view of conformational differences with the new level of crystalline polymorphy of native celluloses revealed in the solid-state 13C-NMR investigations

  12. Synthesis of insecticidal sucrose esters

    Institute of Scientific and Technical Information of China (English)

    Song Zi-juan; Li Shu-jun; Chen Xi; Liu Li-mei; Song Zhan-qian

    2006-01-01

    Some synthetic sucrose esters (SE) are a relatively new class of insecticidal compounds produced by reacting sugars with fatty acids, which are safe for the environment. Especially, sucrose esters composed of C6-C12 fatty acids have desirable insecticidal properties against many soft-bodied arthropod pests. In our study, sucrose octanoate which has the highest activity against a range of arthropod species was synthesized by a trans-esterification method and proved its insecticidal property. Under the condition of a homogeneous liquid, sucrose octanoate was prepared by reacting ethyl octanoate with sucrose at reduced pressure; the yield was 79.11%. Sucrose octanoate synthesized was identified and its property analyzed by IR, TLC and spectrophotometric analysis. It was shown that the ratio of monoester to polyester in sucrose octanoate was 1.48:1. The insecticidal activity of the synthetic sucrose octanoate was evaluated at a concentration of 4 and 8 mg·mL-1. The mortality of first-instar larvae ofLymantria dispar from its contact toxicity was 72.5% after 36 hours, the revision insect reduced rate of Aphis glycines reached above 80% at 4 and 8 mg·mL-1 after being treated for 5 days. Since the SE products are nontoxic to humans and higher animals, fully biodegradable and hydrolyzed to readily metabolizable sucrose and fatty acid, they are not harmful to crops and appear to be good insecticide candidates.

  13. Nano-biocomposite films with modified cellulose nanocrystals and synthesized silver nanoparticles.

    Science.gov (United States)

    Fortunati, E; Rinaldi, S; Peltzer, M; Bloise, N; Visai, L; Armentano, I; Jiménez, A; Latterini, L; Kenny, J M

    2014-01-30

    Ternary nano-biocomposite films based on poly(lactic acid) (PLA) with modified cellulose nanocrystals (s-CNC) and synthesized silver nanoparticles (Ag) have been prepared and characterized. The functionalization of the CNC surface with an acid phosphate ester of ethoxylated nonylphenol favoured its dispersion in the PLA matrix. The positive effects of the addition of cellulose and silver on the PLA barrier properties were confirmed by reductions in the water permeability (WVP) and oxygen transmission rate (OTR) of the films tested. The migration level of all nano-biocomposites in contact with food simulants were below the permitted limits in both non-polar and polar simulants. PLA nano-biocomposites showed a significant antibacterial activity influenced by the Ag content, while composting tests showed that the materials were visibly disintegrated after 15 days with the ternary systems showing the highest rate of disintegration under composting conditions. PMID:24299883

  14. Anti-crease finishing of cotton fabrics based on crosslinking of cellulose with acryloyl malic acid.

    Science.gov (United States)

    Qi, Huan; Huang, Yangen; Ji, Bolin; Sun, Gang; Qing, Feng-Ling; Hu, Chunyan; Yan, Kelu

    2016-01-01

    Maleic acid (MA) has been explored to replace formaldehyde-based dimethylol dihydroxy ethylene urea (DMDHEU) for cotton anti-crease finishing. However, the resilience of treated fabrics was not satisfactorily improved. In this study, acryloyl malic acid (AMA) was synthesized and applied on fabrics as a novel crosslinking agent. The results showed that both crease recovery angle and whiteness index of treated samples were higher than those of MA in the presence/absence of catalyst sodium hypophosphite (SHP). Chemical structure of AMA was confirmed by NMR and MS spectra. The possible crosslinking mechanism between AMA and cellulose was investigated by means of (13)C NMR, MS, FTIR and phosphorus content analyses. It was found that AMA could form ester bonds with cellulose by formation of anhydride intermediate. Meanwhile, additional reaction of double bonds on AMA with another molecule or PH of SHP residual has also contributed to the crosslinking. A reaction equation was proposed based on the analyses. PMID:26453855

  15. Carboxymethyl Cellulose Acetate Butyrate: A Review of the Preparations, Properties, and Applications

    Directory of Open Access Journals (Sweden)

    Mohamed El-Sakhawy

    2014-01-01

    Full Text Available Carboxymethyl cellulose acetate butyrate (CMCAB has gained increasing importance in several fields, particularly in coating technologies and pharmaceutical research. CMCAB is synthesized by esterification of CMC sodium salt with acetic and butyric anhydrides. CMCAB mixed esters are relatively high molecular weight (MW thermoplastic polymers with high glass transition temperatures (Tg. CMCAB ester is dispersible in water and soluble in a wide range of organic solvents, allowing varied opportunity to the solvent choice. It makes application of coatings more consistent and defect-free. Its ability to slow down the release rate of highly water-soluble compounds and to increase the dissolution of poorly soluble compounds makes CMCAB a unique and potentially valuable tool in pharmaceutical and amorphous solid dispersions (ASD formulations.

  16. Surface modification of cellulose fibres

    Directory of Open Access Journals (Sweden)

    Mohamed Naceur Belgacem

    2005-06-01

    Full Text Available Several approaches to the modification of cellulose fibres are described, namely: (i physical treatments such as corona or plasma treatments under different atmospheres; (ii grafting with hydrophobic molecules using well-known sizing compounds; (iii grafting with bi-functional molecules, leaving one of the functions available for further exploitation; and (iv grafting with organometallic compounds. The modified surfaces were characterized by elemental analysis, contact angle measurements, inverse gas chromatography, X-ray photoelectron and infrared spectroscopy, wettability, etc. These different tools provided clear-cut evidence of the occurrence of chemical reactions between the grafting agent used and the hydroxy functions of the cellulose surface, as well as of the existence of covalent bonding in the ensuing composite materials between the matrix and the fibres through the use of doubly reactive coupling agents.

  17. Cellulose degradation by oxidative enzymes

    Directory of Open Access Journals (Sweden)

    Maria Dimarogona

    2012-09-01

    Full Text Available Enzymatic degradation of plant biomass has attracted intensive research interest for the production of economically viable biofuels. Here we present an overview of the recent findings on biocatalysts implicated in the oxidative cleavage of cellulose, including polysaccharide monooxygenases (PMOs or LPMOs which stands for lytic PMOs, cellobiose dehydrogenases (CDHs and members of carbohydrate-binding module family 33 (CBM33. PMOs, a novel class of enzymes previously termed GH61s, boost the efficiency of common cellulases resulting in increased hydrolysis yields while lowering the protein loading needed. They act on the crystalline part of cellulose by generating oxidized and non-oxidized chain ends. An external electron donor is required for boosting the activity of PMOs. We discuss recent findings concerning their mechanism of action and identify issues and questions to be addressed in the future.

  18. Cell adhesion on cellulose nanofibrils

    OpenAIRE

    Liljeström, Anna

    2016-01-01

    Cellulose nanofibrils (CNF) is an emerging biomaterial suitable for medical research. CNF hydrogel has been used as a three dimensional platforms for cell culture. This thesis aims to understand how human liver carcinoma (HepG2) cells interact with CNF. Measurements were performed with Quartz crystal microbalance with dissipation in order to quantify cell adsorption on CNF. Furthermore, the effect of the cell medium on the viscoelastic properties of CNF and on cell-CNF interactions were ...

  19. Lowering costs of microbial cellulose

    OpenAIRE

    Pajuelo, María González; Bungay, Henry; Hogg, Tim; Vasconcelos, Isabel

    1997-01-01

    We have been conducting research with Acetobacter xylinium for microbial conversion of sugars to cellulose. A rotating disk biological contactor should lower costs considerably because its production rates are greater than for the usual method of surface culture. Another major cost saving comes from replacing expensive sugars in the medium with sugars derived from wastes. Extracts of spent grapes from wastes of Portuguese wine factories supply suitable sugars for good production of micr...

  20. The Cellulase KORRIGAN Is Part of the Cellulose Synthase Complex

    NARCIS (Netherlands)

    Vain, T.; Crowell, E.F.; Timpano, H.; Biot, E.; Desprez, T.; Mansoori Zangir, N.; Trindade, L.M.; Pagant, S.; Robert, S.; Hofte, H.; Gonneau, M.; Vernhettes, S.

    2014-01-01

    Plant growth and organ formation depend on the oriented deposition of load-bearing cellulose microfibrils in the cell wall. Cellulose is synthesized by a large relative molecular weight cellulose synthase complex (CSC), which comprises at least three distinct cellulose synthases. Cellulose synthesis

  1. Cellulose-binding domains: tools for innovation in cellulosic fibre production and modification

    NARCIS (Netherlands)

    Quentin, M.G.E.; Valk, van der H.C.P.M.; Dam, van J.E.G.; Jong, de E.

    2003-01-01

    Plant cell walls are composed of cellulose, nature's most abundant macromolecule, and therefore represent a renewable resource of special technical importance. Cellulose degrading enzymes involved in plant cell wall loosening (expansins), or produced by plant pathogenic microorganisms (cellulases),

  2. Engineering of a novel cellulose-adherent cellulolytic Saccharomyces cerevisiae for cellulosic biofuel production.

    Science.gov (United States)

    Liu, Zhuo; Ho, Shih-Hsin; Sasaki, Kengo; den Haan, Riaan; Inokuma, Kentaro; Ogino, Chiaki; van Zyl, Willem H; Hasunuma, Tomohisa; Kondo, Akihiko

    2016-01-01

    Cellulosic biofuel is the subject of increasing attention. The main obstacle toward its economic feasibility is the recalcitrance of lignocellulose requiring large amount of enzyme to break. Several engineered yeast strains have been developed with cellulolytic activities to reduce the need for enzyme addition, but exhibiting limited effect. Here, we report the successful engineering of a cellulose-adherent Saccharomyces cerevisiae displaying four different synergistic cellulases on the cell surface. The cellulase-displaying yeast strain exhibited clear cell-to-cellulose adhesion and a "tearing" cellulose degradation pattern; the adhesion ability correlated with enhanced surface area and roughness of the target cellulose fibers, resulting in higher hydrolysis efficiency. The engineered yeast directly produced ethanol from rice straw despite a more than 40% decrease in the required enzyme dosage for high-density fermentation. Thus, improved cell-to-cellulose interactions provided a novel strategy for increasing cellulose hydrolysis, suggesting a mechanism for promoting the feasibility of cellulosic biofuel production. PMID:27079382

  3. Effects of reaction conditions on cellulose structures synthesized in vitro by bacterial cellulose synthases.

    Science.gov (United States)

    Penttilä, Paavo A; Sugiyama, Junji; Imai, Tomoya

    2016-01-20

    Cellulose was synthesized by cellulose synthases extracted from the Komagataeibacter xylinus (formerly known as Gluconacetobacter xylinus). The effects of temperature and centrifugation of the reaction solution on the synthesis products were investigated. Cellulose with number-average degree of polymerization (DPn) roughly in the range 60-80 and cellulose II crystal structure was produced under all conditions. The amount of cellulose varied with temperature and centrifugation, and the centrifugation at 2000 × g also slightly reduced the DPn. Cellulose production was maximal around the temperature 35 °C and without centrifugation. At higher temperatures and during centrifugation at 2000 × g the proteins started to denature, causing differences also in the morphology of the cellulosic aggregates, as seen with electron microscopy. These observations serve as a basis for discussions about the factors affecting the structure formation and chain length of in vitro synthesized cellulose. PMID:26572398

  4. Micromechanics and poroelasticity of hydrated cellulose networks.

    Science.gov (United States)

    Lopez-Sanchez, P; Rincon, Mauricio; Wang, D; Brulhart, S; Stokes, J R; Gidley, M J

    2014-06-01

    The micromechanics of cellulose hydrogels have been investigated using a new rheological experimental approach, combined with simulation using a poroelastic constitutive model. A series of mechanical compression steps at different strain rates were performed as a function of cellulose hydrogel thickness, combined with small amplitude oscillatory shear after each step to monitor the viscoelasticity of the sample. During compression, bacterial cellulose hydrogels behaved as anisotropic materials with near zero Poisson's ratio. The micromechanics of the hydrogels altered with each compression as water was squeezed out of the structure, and microstructural changes were strain rate-dependent, with increased densification of the cellulose network and increased cellulose fiber aggregation observed for slower compressive strain rates. A transversely isotropic poroelastic model was used to explain the observed micromechanical behavior, showing that the mechanical properties of cellulose networks in aqueous environments are mainly controlled by the rate of water movement within the structure. PMID:24784575

  5. Cellulose Synthases and Synthesis in Arabidopsis

    Institute of Scientific and Technical Information of China (English)

    Anne Endler; Staffan Persson

    2011-01-01

    Plant cell walls are complex structures composed of high-molecular-weight polysaccharides,proteins,and lignins. Among the wall polysaccharides,cellulose,a hydrogen-bonded β-1,4-linked glucan microfibril,is the main load-bearing wall component and a key precursor for industrial applications. Cellulose is synthesized by large multi-meric cellulose synthase (CesA) complexes,tracking along cortical microtubules at the plasma membrane. The only known components of these complexes are the cellulose synthase proteins. Recent studies have identified tentative interaction partners for the CesAs and shown that the migratory patterns of the CesA complexes depend on phosphorylation status. These advances may become good platforms for expanding our knowledge about cellulose synthesis in the near future. In addition,our current understanding of cellulose chain polymerization in the context of the CesA complex is discussed.

  6. CELLULOSE POWDER FROM OLIVE INDUSTRY SOLID WASTE

    Directory of Open Access Journals (Sweden)

    Othman A. Hamed,

    2012-07-01

    Full Text Available In the present work, a method for extracting cellulose from olive industry solid waste has been developed. The method involves subjecting solid olive waste to kraft pulping, followed by multistep bleaching processes. The totally free chlorine chemical bleaching sequence APEP was the most effective and gave an average cellulose yield of about 35%. The extracted cellulose was extensively characterized using FTIR, EMS, HPLC, and viscometry. Our key finding in this study is that the extracted cellulose was found to have physio-chemical properties that are similar to those of conventional microcrystalline cellulose (MCC. This is important, as our results show how lignocellulosic agricultural wastes can be utilized to produce high value cellulose powder.

  7. Size Effects of Nano-crystalline Cellulose

    Institute of Scientific and Technical Information of China (English)

    Guo Kang LI; Xiao Fang LI; Yong JIANG; Mei Zhen ZENG; En Yong DING

    2003-01-01

    Natural cellulose with the crystal form of cellulose Ⅰ, when treated with condensed lye(e.g. 18%NaOH), can change into new crystal form of cellulose Ⅱ. But the nano-crystallinecellulose(NCC) can do it when only treated with dilute lye (e.g. 1%NaOH) at room temperatureand even can dissolve into slightly concentrated lye (e.g. 4%NaOH).

  8. Bulk and interfacial properties of cellulose ethers

    OpenAIRE

    Bodvik, Rasmus

    2012-01-01

    This work summarizes several studies that all concern cellulose ethers of the types methylcellulose (MC) hydroxypropylmethylcellulose (HPMC) and ethyl(hydroxyethyl)cellulose (EHEC). They share the feature of negative temperature response, as they are soluble in water at room temperature but phase separate and sometimes form gels at high temperatures. The different types of viscosity transitions occurring in these three cellulose ethers are well-known. However, earlier studies have not solved ...

  9. Drag Reduction of Bacterial Cellulose Suspensions

    OpenAIRE

    Ogata, Satoshi; Numakawa, Tetsuya; Kubo, Takuya

    2010-01-01

    Drag reduction due to bacterial cellulose suspensions with small environmental loading was investigated. Experiments were carried out by measuring the pressure drop in pipe flow. It was found that bacterial cellulose suspensions give rise to drag reduction in the turbulent flow range. We observed a maximum drag reduction ratio of 11% and found that it increased with the concentration of the bacterial cellulose suspension. However, the drag reduction effect decreased in the presence of mechani...

  10. Drag Reduction of Bacterial Cellulose Suspensions

    OpenAIRE

    Satoshi Ogata; Tetsuya Numakawa; Takuya Kubo

    2011-01-01

    Drag reduction due to bacterial cellulose suspensions with small environmental loading was investigated. Experiments were carried out by measuring the pressure drop in pipe flow. It was found that bacterial cellulose suspensions give rise to drag reduction in the turbulent flow range. We observed a maximum drag reduction ratio of 11% and found that it increased with the concentration of the bacterial cellulose suspension. However, the drag reduction effect decreased in the presence of mechani...

  11. Cellulose biosynthesis and function in bacteria.

    OpenAIRE

    Ross, P; Mayer, R; Benziman, M

    1991-01-01

    The current model of cellulose biogenesis in plants, as well as bacteria, holds that the membranous cellulose synthase complex polymerizes glucose moieties from UDP-Glc into beta-1,4-glucan chains which give rise to rigid crystalline fibrils upon extrusion at the outer surface of the cell. The distinct arrangement and degree of association of the polymerizing enzyme units presumably govern extracellular chain assembly in addition to the pattern and width of cellulose fibril deposition. Most e...

  12. Liquid crystalline cellulose derivatives for mirrorless lasing

    OpenAIRE

    Wenzlik, Daniel

    2013-01-01

    In this thesis cholesteric films made of liquid crystalline cellulose derivatives with improved optical properties were prepared. The choice of the solvent, hydrogen bond influencing additives, the synthetic realization of a very high degree of substitution on the cellulosic polymer and the use of mechanical stirring at the upper concentration limit of the liquid crystalline range were the basis for an improved alignment of the applied cellulose tricarbamates. In combination with a tuned subs...

  13. Lyocell, The New Generation of Regenerated Cellulose

    OpenAIRE

    Éva Borbély

    2008-01-01

    For the majority of the last century, commercial routes to regenerated cellulosefibres have coped with the difficulties of making a good cellulose solution by using an easyto dissolve derivative (e.g. xanthane in the case of viscose rayon) or complex (e.g.cuprammonium rayon). For the purposes of this paper, advanced cellulosic fibres aredefined as those made from a process involving direct dissolution of cellulose. The firstexamples of such fibres have now been generically designaed as lyocel...

  14. Alexa Fluor-labeled Fluorescent Cellulose Nanocrystals for Bioimaging Solid Cellulose in Spatially Structured Microenvironments

    Energy Technology Data Exchange (ETDEWEB)

    Grate, Jay W.; Mo, Kai-For; Shin, Yongsoon; Vasdekis, Andreas; Warner, Marvin G.; Kelly, Ryan T.; Orr, Galya; Hu, Dehong; Dehoff, Karl J.; Brockman, Fred J.; Wilkins, Michael J.

    2015-03-18

    Cellulose nanocrystal materials have been labeled with modern Alexa Fluor dyes in a process that first links the dye to a cyanuric chloride molecule. Subsequent reaction with cellulose nanocrystals provides dyed solid microcrystalline cellulose material that can be used for bioimaging and suitable for deposition in films and spatially structured microenvironments. It is demonstrated with single molecular fluorescence microscopy that these films are subject to hydrolysis by cellulose enzymes.

  15. Alteration of in vivo cellulose ribbon assembly by carboxymethylcellulose and other cellulose derivatives

    OpenAIRE

    1982-01-01

    In vivo cellulose ribbon assembly by the Gram-negative bacterium Acetobacter xylinum can be altered by incubation in carboxymethylcellulose (CMC), a negatively charged water-soluble cellulose derivative, and also by incubation in a variety of neutral, water-soluble cellulose derivatives. In the presence of all of these substituted celluloses, normal fasciation of microfibril bundles to form the typical twisting ribbon is prevented. Alteration of ribbon assembly is most extensive in the presen...

  16. Cold Flow Properties of Fatty Esters

    Directory of Open Access Journals (Sweden)

    Andrea Kleinová

    2007-09-01

    Full Text Available The article is devoted to the study of cold fl ow properties of neat esters of branched chain alcohols with fatty acids and blends of these esters with fossil diesel fuel. According to the determined CFPP values, the influence of alcohol branching on the fuel filterability is negligible and was detected only in the case of 2-ethyl hexanol. Fossil fuel blending with fatty esters up to 10 % vol. does not substantially change the cold flow properties of fossil fuel. DSC cooling scan parameters should be employed to predict CFPP of blended diesel fuel.

  17. Cytocompatible cellulose hydrogels containing trace lignin.

    Science.gov (United States)

    Nakasone, Kazuki; Kobayashi, Takaomi

    2016-07-01

    Sugarcane bagasse was used as a cellulose resource to prepare transparent and flexible cellulose hydrogel films. On the purification process from bagasse to cellulose, the effect of lignin residues in the cellulose was examined for the properties and cytocompatibility of the resultant hydrogel films. The cellulose was dissolved in lithium chloride/N,N-dimethylacetamide solution and converted to hydrogel films by phase inversion. In the purification process, sodium hydroxide (NaOH) treatment time was changed from 1 to 12h. This resulted in cellulose hydrogel films having small amounts of lignin from 1.62 to 0.68%. The remaining lignin greatly affected hydrogel properties. Water content of the hydrogel films was increased from 1153 to 1525% with a decrease of lignin content. Moreover, lower lignin content caused weakening of tensile strength from 0.80 to 0.43N/mm(2) and elongation from 45.2 to 26.5%. Also, similar tendency was observed in viscoelastic behavior of the cellulose hydrogel films. Evidence was shown that the lignin residue was effective for the high strength of the hydrogel films. In addition, scanning probe microscopy in the morphological observation was suggested that the trace lignin in the cellulose hydrogel affected the cellulose fiber aggregation in the hydrogel network. The trace of lignin in the hydrogels also influenced fibroblast cell culture on the hydrogel films. The hydrogel film containing 1.68% lignin showed better fibroblast compatibility as compared to cell culture polystyrene dish used as reference. PMID:27127053

  18. Carboxymethylation of Cellulose by Microwave irradiation

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Cellulose may be readily converted into ethers involving primary and secondary alcohol groups in each monomer unit and the glycosidic bonds. However, these reactions are rather more complicated than with simple substances, because the stereochemistry of the cellulose molecule is such that the vast majority of its hydroxyl groups form intra-chain hydrogen bonds or inter-chain hydrogen bonds with contiguous molecules. Carboxymethylcellulose (CMC) has played an important part in the commercial uses of cellulose derivatives. CMC becomes alkali and water soluble. The polarity can, in fact, be increased by introduction of ionizing groups, ie carboxymethyl group. CMC is generally produced by the reaction of alkali cellulose with chloroacetic acid.

  19. Chemo-catalytic valorization of cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Palkovits, R. [RWTH Aachen Univ. (Germany). Inst. fuer Technische und Makromolekulare Chemie

    2012-07-01

    Cellulose can be utilized as carbon source for the production of novel platform molecules as well as fuel motifs. Promising transformation strategies cover the hydrolytic hydrogenation or hydrogenolysis of cellulose to sugar alcohols, the hydrolysis of cellulose to glucose followed by dehydration to 5-hydroxymethylfurfural or levulinic acid and the further hydrogenation of levulinic acid to {gamma}-valerolactone. Main challenges result from the high degree of functionalization of cellulosic feedstocks. In line, processes are carried out in liquid phase utilizing rather polar solvents and aiming for a tailored defunctionalisation of these oxygen rich compounds. Consequently, such transformations require novel strategies concerning the development of suitable catalysts and appropriate process concepts. (orig.)

  20. Simultaneous cellulose conversion and hydrogen production assisted by cellulose decomposition under UV-light photocatalysis

    OpenAIRE

    Zhang, Guan; Ni, Chengsheng; Huang, Xiubing; Welgamage, Aakash; Lawton, Linda A.; Robertson, Peter K. J.; Irvine, John T. S.

    2016-01-01

    Photocatalytic conversion of cellulose to sugars and carbon dioxide with simultaneous production of hydrogen assisted by cellulose decomposition under UV or solar light irradiation was achieved upon immobilization of cellulose onto a TiO2 photocatalyst. This approach enables production of hydrogen from water without using valuable sacrificial agents, and provides the possibility for recovering sugars as liquid fuels.

  1. Simultaneous cellulose conversion and hydrogen production assisted by cellulose decomposition under UV-light photocatalysis.

    Science.gov (United States)

    Zhang, Guan; Ni, Chengsheng; Huang, Xiubing; Welgamage, Aakash; Lawton, Linda A; Robertson, Peter K J; Irvine, John T S

    2016-01-28

    Photocatalytic conversion of cellulose to sugars and carbon dioxide with simultaneous production of hydrogen assisted by cellulose decomposition under UV or solar light irradiation was achieved upon immobilization of cellulose onto a TiO2 photocatalyst. This approach enables production of hydrogen from water without using valuable sacrificial agents, and provides the possibility for recovering sugars as liquid fuels. PMID:26661296

  2. High Performance Regenerated Cellulose Membranes from Trimethylsilyl Cellulose

    KAUST Repository

    Ali, Ola

    2013-05-01

    Regenerated cellulose (RC) membranes are extensively used in medical and pharmaceutical separation processes due to their biocompatibility, low fouling tendency and solvent resistant properties. They typically possess ultrafiltration and microfiltration separation characteristics, but recently, there have been attempts to widen their pool of applications in nanofiltration processes. In this work, a novel method for preparing high performance composite RC membranes was developed. These membranes reveal molecular weight cut-offs (MWCO) of less than 250 daltons, which possibly put them ahead of all commercial RC membranes and in competition with high performance nanofiltration membranes. The membranes were prepared by acidic hydrolysis of dip-coated trimethylsilyl cellulose (TMSC) films. TMSC, with a degree of silylation (DS) of 2.8, was prepared from microcrystalline cellulose by reaction with hexamethyldisilazane under the homogeneous conditions of LiCl/DMAC solvent system. Effects of parameters, such as coating solution concentration and drying rates, were investigated. It was concluded that higher TMSC concentrations as well as higher solvent evaporation rates favor better MWCOs, mainly due to increase in the selective layer thickness. Successful cross-linking of prepared membranes with glyoxal solutions, in the presence of boric acid as a catalyst, resulted in MWCOs less than 250 daltons. The suitability of this crosslinking reaction for large scale productions was already proven in the manufacturing of durable-press fabrics. For us, the inexpensive raw materials as well as the low reaction times and temperatures were of interest. Moreover, the non-toxic nature of glyoxal is a key advantage in medical and pharmaceutical applications. The membranes prepared in this work are strong candidates for separation of small organic solutes from organic solvents streams in pharmaceutical industries. Their hydrophilicity, compared to typical nanofiltration membranes, offer

  3. Space-Qualifiable Cyanate Ester Elastomer Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Cornerstone Research Group, Inc. (CRG) proposes to design and develop a space-qualifiable cyanate ester elastomer for application in self-deployable space...

  4. Space-Qualifiable Cyanate Ester Elastomer Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In Phase 1, CRG demonstrated the feasibility of a novel approach to prepare cyanate ester based elastomers. This approach polymerizes in-situ siloxane within a...

  5. Pyrolytic sugars from cellulosic biomass

    Science.gov (United States)

    Kuzhiyil, Najeeb

    Sugars are the feedstocks for many promising advanced cellulosic biofuels. Traditional sugars derived from starch and sugar crops are limited in their availability. In principle, more plentiful supply of sugars can be obtained from depolymerization of cellulose, the most abundant form of biomass in the world. Breaking the glycosidic bonds between the pyranose rings in the cellulose chain to liberate glucose has usually been pursued by enzymatic hydrolysis although a purely thermal depolymerization route to sugars is also possible. Fast pyrolysis of pure cellulose yields primarily levoglucosan, an anhydrosugar that can be hydrolyzed to glucose. However, naturally occurring alkali and alkaline earth metals (AAEM) in biomass are strongly catalytic toward ring-breaking reactions that favor formation of light oxygenates over anhydrosugars. Removing the AAEM by washing was shown to be effective in increasing the yield of anhydrosugars; but this process involves removal of large amount of water from biomass that renders it energy intensive and thereby impractical. In this work passivation of the AAEM (making them less active or inactive) using mineral acid infusion was explored that will increase the yield of anhydrosugars from fast pyrolysis of biomass. Mineral acid infusion was tried by previous researchers, but the possibility of chemical reactions between infused acid and AAEM in the biomass appears to have been overlooked, possibly because metal cations might be expected to already be substantially complexed to chlorine or other strong anions that are found in biomass. Likewise, it appears that previous researchers assumed that as long as AAEM cations were in the biomass, they would be catalytically active regardless of the nature of their complexion with anions. On the contrary, we hypothesized that AAEM can be converted to inactive or less active salts using mineral acids. Various biomass feedstocks were infused with mineral (hydrochloric, nitric, sulfuric and

  6. Rapid Output Growth of Special Acrylic Esters

    Institute of Scientific and Technical Information of China (English)

    Wang Lianzhi

    2007-01-01

    @@ Acrylic esters are usually classified into general-purpose varieties and special varieties. The production and application of general-purpose varieties is already quite matured in the world and their output growth tends to be flat. Owing to the development of coatings, electronics, automobiles,textiles, printing and construction sectors, especially the application of radiation curing technology in various sectors, special acrylic esters have developed rapidly.

  7. Synthesis of a new energetic nitrate ester

    Energy Technology Data Exchange (ETDEWEB)

    Chavez, David E [Los Alamos National Laboratory

    2008-01-01

    Nitrate esters have been known as useful energetic materials since the discovery of nitroglycerin by Ascanio Sobrero in 1846. The development of methods to increase the safety and utility of nitroglycerin by Alfred Nobel led to the revolutionary improvement in the utility of nitroglycerin in explosive applications in the form of dynamite. Since then, many nitrate esters have been prepared and incorporated into military applications such as double-based propellants, detonators and as energetic plasticizers. Nitrate esters have also been shown to have vasodilatory effects in humans and thus have been studied and used for treatments of ailments such as angina. The mechanism of the biological response towards nitrate esters has been elucidated recently. Interestingly, many of the nitrate esters used for military purposes are liquids (ethylene glycol dinitrate, propylene glycol dinitrate, etc). Pentaerythritol tetranitrate (PETN) is one of the only solid nitrate esters, besides nitrocellulose, that is used in any application. Unfortunately, PETN melting point is above 100 {sup o}C, and thus must be pressed as a solid for detonator applications. A more practical material would be a melt-castable explosive, for potential simplification of manufacturing processes. Herein we describe the synthesis of a new energetic nitrate ester (1) that is a solid at ambient temperatures, has a melting point of 85-86 {sup o}C and has the highest density of any known nitrate ester composed only of carbon, hydrogen, nitrogen and oxygen. We also describe the chemical, thermal and sensitivity properties of 1 as well as some preliminary explosive performance data.

  8. Increase in cellulose accumulation and improvement of saccharification by overexpression of arabinofuranosidase in rice.

    Directory of Open Access Journals (Sweden)

    Minako Sumiyoshi

    Full Text Available Cellulosic biomass is available for the production of biofuel, with saccharification of the cell wall being a key process. We investigated whether alteration of arabinoxylan, a major hemicellulose in monocots, causes an increase in saccharification efficiency. Arabinoxylans have β-1,4-D-xylopyranosyl backbones and 1,3- or 1,4-α-l-arabinofuranosyl residues linked to O-2 and/or O-3 of xylopyranosyl residues as side chains. Arabinose side chains interrupt the hydrogen bond between arabinoxylan and cellulose and carry an ester-linked feruloyl substituent. Arabinose side chains are the base point for diferuloyl cross-links and lignification. We analyzed rice plants overexpressing arabinofuranosidase (ARAF to study the role of arabinose residues in the cell wall and their effects on saccharification. Arabinose content in the cell wall of transgenic rice plants overexpressing individual ARAF full-length cDNA (OsARAF1-FOX and OsARAF3-FOX decreased 25% and 20% compared to the control and the amount of glucose increased by 28.2% and 34.2%, respectively. We studied modifications of cell wall polysaccharides at the cellular level by comparing histochemical cellulose staining patterns and immunolocalization patterns using antibodies raised against α-(1,5-linked l-Ara (LM6 and β-(1,4-linked d-Xyl (LM10 and LM11 residues. However, they showed no visible phenotype. Our results suggest that the balance between arabinoxylan and cellulose might maintain the cell wall network. Moreover, ARAF overexpression in rice effectively leads to an increase in cellulose accumulation and saccharification efficiency, which can be used to produce bioethanol.

  9. Allied, MGC link on cyanate esters

    International Nuclear Information System (INIS)

    In the latest of a line of joint ventures in its plastics business, Allied Signal has reached agreement with Mitsubishi Gas Chemical (MGC) to jointly develop thermoset cyanate ester resins and blends. The deal will involve further development of Allied Signal's Primaset phenol-formaldehyde cyanate ester resins, a new entrant in the thermoset arena. Although the Primaset resins were discovered in the 1960s, this would be the first time they are available commercially. The deal will marry Primaset technology with MGC's Skylex bisphenol A cyanate ester resins, says Fred DiAntonis, director/advanced materials at Allied Signal. The two firms are looking at marketing blends of the two materials. The potential market for these resins, used commercially by the electronics industry in printed circuit boards and by the aerospace industry in composites, is significant, says Robert P. Viarengo, Allied Signal president/performance materials. By aligning ourselves with MGC, the world leader in cyanate ester resin, we anticipate moving forward aggressively. The main competitor is Ciba, which acquired bisphenol A cyanate ester resins with its purchase of Rhone-Poulenc's high temperature resins business. DiAntonis estimates the market for cyanate ester resins could be worth $150 million by the end of the decade, although development costs have been in the tens of millions of dollars range

  10. A novel drug carrier based on functional modified nanofiber cellulose and the control release behavior

    Science.gov (United States)

    Shi, Xiangning; Zheng, Yudong; Zhang, Wei; Zhang, Zeyu; Peng, Yunling

    2013-08-01

    This study developed a novel drug carrier based on functional modified bacterial cellulose(BC) which was conjugated with Ibuprofen(IBU) by esterification. BC-Ibuprofen as the macro- molecular prodrugs and drug carrier used to improve the short half-life of the drug, and was able to control release through the hydrolysis of ester bond between the hydroxyl groups of BC with Ibuprofen under different condition. Fourier transform infrared analysis revealed that Ibuprofen had been successfully grafted onto the bacterial cellulose (BC). Thermal and morphological characterization indicated the formation of the BC-Ibuprofen system incompletely reacted maintained the bulk structure of the pristine material such as crystallinity, 3-dimentional network and so on. The drug release behaviours were affected by the ester bond hydrolysis as well as the microstructure characteristics of the modified nanofiber. The release of BC-IBU showed an apparent pH-dependent, fast in alkaline and acid solution but slow relatively in neutral. Such pH-responsiveness, in addition to its morphological characteristics, in this paper suggested a great potential of BC-IBU as a more effective, safe, and stable prodrug candidate.

  11. Olefin cross-metathesis as a source of polysaccharide derivatives: cellulose ω-carboxyalkanoates.

    Science.gov (United States)

    Meng, Xiangtao; Matson, John B; Edgar, Kevin J

    2014-01-13

    Cross-metathesis has been shown for the first time to be a useful method for the synthesis of polysaccharide derivatives, focusing herein on preparation of cellulose ω-carboxyalkanoates. Commercially available cellulose esters were first acylated with 10-undecenoyl chloride, providing esters with olefin-terminated side chains. Subsequent cross-metathesis of these terminal olefin moieties with acrylic acid was performed in solvents including acrylic acid, THF, and CH2Cl2. Complete conversion to discrete, soluble cross-metathesis products was achieved by using the Hoveyda-Grubbs second generation ruthenium catalyst and an excess of acrylic acid. Oligomerization during storage, caused by a free radical mechanism, was observed and successfully suppressed by the addition of a free radical scavenger (BHT). Furthermore, the cross-metathesis products exhibited glass transition temperatures (Tg) that were at least 50 °C higher than ambient temperature, supporting the potential for application of these polymers as amorphous solid dispersion matrices for enhancing drug aqueous solubility. PMID:24328072

  12. [Audiometry in the cellulose industry].

    Science.gov (United States)

    Corrao, C R; Milano, L; Pedulla, P; Carlesi, G; Bacaloni, A; Monaco, E

    1993-01-01

    A noise level dosimetry and audiometric testing were conducted in a cellulose factory to determine the hazardous noise level and the prevalence of noise induced hearing loss among the exposed workers. The noise level was recorded up to 90 db (A) in several working areas. 18 workers, potentially exposed to noise injury, evidenced a significant hearing loss. While no evidence of noise injury was recorded in a control group of 100 subjects. This finding suggest a strict relationship between audiometric tests, the noise level recorded in the working place and the working seniority of exposed employers. PMID:7720969

  13. Rheological characterization of microcrystalline cellulose and silicified microcrystalline cellulose wet masses using a mixer torque rheometer.

    Science.gov (United States)

    Luukkonen, P; Schaefer, T; Hellén, L; Juppo, A M; Yliruusi, J

    1999-10-25

    The rheological properties of silicified microcrystalline cellulose (Prosolv 50) were compared with those of standard grades of microcrystalline cellulose (Emcocel 50 and Avicel PH 101). Cellulose samples were analyzed using nitrogen adsorption together with particle size, flowability, density and swelling volume studies. The rheological behaviour of the wet powder masses was studied as a function of mixing time using a mixer torque rheometer (MTR). Silicified microcrystalline cellulose exhibited improved flow characteristics and increased specific surface area compared to standard microcrystalline cellulose grades. Although the silicification process affected the swelling properties and, furthermore, the mixing kinetics of microcrystalline cellulose, the source of the microcrystalline cellulose had a stronger influence than silicification on the liquid requirement at peak torque. PMID:10518674

  14. Effect of rheological properties of dissolved cellulose/microfibrillated cellulose blend suspensions on film forming.

    Science.gov (United States)

    Saarikoski, Eve; Rissanen, Marja; Seppälä, Jukka

    2015-03-30

    Enzymatically treated cellulose was dissolved in a NaOH/ZnO solvent system and mixed together with microfibrillated cellulose (MFC) in order to find the threshold in which MFC fibers form a percolation network within the dissolved cellulose solution and in order to improve the properties of regenerated cellulose films. In the aqueous state, correlations between the rheological properties of dissolved cellulose/MFC blend suspensions and MFC fiber concentrations were investigated and rationalized. In addition, rheological properties of diluted MFC suspensions were characterized and a correlation with NaOH concentration was found, thus partly explaining the flow properties of dissolved cellulose/MFC blend suspensions. Finally, based on results from Dynamic Mechanical Analysis (DMA), MFC addition had strengthening/plasticizing effect on regenerated cellulose films if low concentrations of MFC, below the percolation threshold (5.5-6 wt%, corresponding to 0.16-0.18 wt% of MFC in the blend suspensions), were used. PMID:25563945

  15. Cellulose nanocrystals: synthesis, functional properties, and applications

    Directory of Open Access Journals (Sweden)

    George J

    2015-11-01

    Full Text Available Johnsy George, SN Sabapathi Food Engineering and Packaging Division, Defence Food Research Laboratory, Siddarthanagar, Mysore, Karnataka, India Abstract: Cellulose nanocrystals are unique nanomaterials derived from the most abundant and almost inexhaustible natural polymer, cellulose. These nanomaterials have received significant interest due to their mechanical, optical, chemical, and rheological properties. Cellulose nanocrystals primarily obtained from naturally occurring cellulose fibers are biodegradable and renewable in nature and hence they serve as a sustainable and environmentally friendly material for most applications. These nanocrystals are basically hydrophilic in nature; however, they can be surface functionalized to meet various challenging requirements, such as the development of high-performance nanocomposites, using hydrophobic polymer matrices. Considering the ever-increasing interdisciplinary research being carried out on cellulose nanocrystals, this review aims to collate the knowledge available about the sources, chemical structure, and physical and chemical isolation procedures, as well as describes the mechanical, optical, and rheological properties, of cellulose nanocrystals. Innovative applications in diverse fields such as biomedical engineering, material sciences, electronics, catalysis, etc, wherein these cellulose nanocrystals can be used, are highlighted. Keywords: sources of cellulose, mechanical properties, liquid crystalline nature, surface modification, nanocomposites 

  16. Radiation pretreatment of cellulose for energy production

    Science.gov (United States)

    Dela Rosa, A. M.; Dela Mines, A. S.; Banzon, R. B.; Simbul-Nuguid, Z. F.

    The effect of radiation pretreatment of agricultural cellulosic wastes was investigated through hydrolytic reactions of cellulose. Gamma irradiation significantly increased the acid hydrolysis of rice straw, rice hull and corn husk. The yields of reducing sugar were higher with increasing radiation dose in these materials. The observed radiation effect varied with the cellulosic material but it correlated with neither the cellulose content nor the lignin content. Likewise, the radiation pretreatment accelerated the subsequent enzymatic hydrolysis of rice straw and rice hull by cellulase. The irradiated rice straw appeared to be a better growth medium for the cellulolytic microorganism, Myrothecium verrucaria, than the non-irradiated material. This was attributed to increased digestibility of the cellulose by the microorganism.

  17. Radiation pretreatment of cellulose for energy production

    International Nuclear Information System (INIS)

    The effect of radiation pretreatment of agricultural cellulosic wastes was investigated through hydrolytic reactions of cellulose. Gamma irradiation significantly increased the acid hydrolysis of rice straw, rice hull and corn husk. The yields of reducing sugar were higher with increasing radiation dose in these materials. The observed radiation effect varied with the cellulose material but it correlated with neither the cellulose content nor the lignin content. Likewise, the radiation pretreatment accelerated the subsequent enzymatic hydrolysis of rice straw and rice hull by cellulase. The irradiated rice straw appeared to be a better growth medium for the cellulolytic microorganism, Myrothecium verrucaria, than the non-irradiated material. This was attributed to increased digestibility of the cellulose by the microorganism. (author)

  18. Single-cell protein from waste cellulose

    Science.gov (United States)

    Dunlap, C. E.; Callihan, C. D.

    1973-01-01

    The recycle, reuse, or reclamation of single cell protein from liquid and solid agricultural waste fibers by a fermentation process is reported. It is shown that cellulose comprises the bulk of the fibers at 50% to 55% of the dry weight of the refuse and that its biodegradability is of prime importance in the choice of a substrate. The application of sodium hydroxide followed by heat and pressure serves to de-polymerize and disrupt lignin structure while swelling the cellulose to increase water uptake and pore volume. Some of the lignin, hemi-celluloses, ash, and cellulose of the material is hydrolized and solubilized. Introduction of microorganisms to the substrate fibers mixed with nutrients produces continuous fermentation of cellulose for further protein extraction and purification.

  19. Photophysics of alloxazines on cellulose.

    Science.gov (United States)

    Sikorski, Marek; Sikorska, Ewa; Khmelinskii, Igor V; Gonzalez-Moreno, Rafael; Bourdelande, José L; Siemiarczuk, Aleksander

    2002-09-01

    We report the UV-Vis absorption, fluorescence and transient absorption spectra of selected methylalloxazines adsorbed on cellulose from a polar solvent. The ground-state properties of these probe molecules in the cellulose matrix are similar to those in polar protic solvents. Fluorescence decay data allowed identification of three emitting species for every molecule studied, excluding 1-methyllumichrome which lacks the capacity to rearrange into an isoalloxazinic form. The short-lived emission component was attributed to the neutral form of the molecule, and the two longer-lived components were assigned to the two distinct deprotonated monoanionic forms resulting from dissociation at the respective N(3) and N(1) nitrogen atoms. The two monoanions coexist due to their very similar pKa, values. Transient absorption experiments detected two species created by the laser pulse in these systems. The short-lived species was identified as the triplet excited state, and the long-lived species as the semireduced radical, formed by hydrogen atom or proton transfer from the glycosidic unit to the alloxazine carbonyl group. PMID:12665311

  20. Anaerobic digestion of cellulosic wastes

    International Nuclear Information System (INIS)

    Anaerobic digestion is a potentially attractive technology for volume reduction of low-level radioactive cellulosic wastes. A substantial fraction of the waste is converted to off-gas and a relatively small volume of biologically stabilized sludge is produced. Process development work has been completed using a 75-L digester to verify rates and conversions obtained at the bench scale. Start-up and operating procedures have been developed, and effluent was generated for characterization and disposal studies. Three runs using batch and fed-batch conditions were made lasting 36, 90, and 423 d. Solids solubilization rates and gas production rates averaged approximately 1.8 g cellulose per L of reactor per d and 1.2 L of off-gas per L reactor per d. Greater than 80% destruction of the volatile suspended solids was obtained. A simple dynamic process model was constructed to aid in process design and for use in process monitoring and control of a large-scale digester

  1. Anaerobic digestion of cellulosic wastes

    International Nuclear Information System (INIS)

    Anaerobic digestion is a potentially attractive technology for volume reduction of cellulosic wastes. A substantial fraction of the waste is converted to off-gas and a relatively small volume of biologically stabilized sludge is produced. Process development work is underway using a 75-L digester to verify rates and conversions obtained at the bench scale, to develop start-up and operating procedures, and to generate effluent for characterization and disposal studies. Three runs using batch and batch-fed conditions have been made lasting 36, 90, and over 200 days. Solids solubilization and gas production rates and total solids destruction have met or exceeded the target values of 0.6 g cellulose per L of reactor per day, 0.5 L off-gas per L of reactor per day, and 80% destruction of solids, respectively. Successful start-up procedures have been developed, and preliminary effluent characterization and disposal studies have been done. A simple dynamic process model has been constructed to aid in further process development and for use in process monitoring and control of a large-scale digester. 7 references, 5 figures, 1 table

  2. Detection of testosterone esters in blood.

    Science.gov (United States)

    Forsdahl, Guro; Erceg, Damir; Geisendorfer, Thomas; Turkalj, Mirjana; Plavec, Davor; Thevis, Mario; Tretzel, Laura; Gmeiner, Günter

    2015-01-01

    Injections of synthetic esters of testosterone are among the most common forms of testosterone application. In doping control, the detection of an intact ester of testosterone in blood gives unequivocal proof of the administration of exogenous testosterone. The aim of the current project was to investigate the detection window for injected testosterone esters as a mixed substance preparation and as a single substance preparation in serum and plasma. Furthermore, the suitability of different types of blood collection devices was evaluated. Collection tubes with stabilizing additives, as well as non-stabilized serum separation tubes, were tested. A clinical study with six participants was carried out, comprising a single intramuscular injection of either 1000 mg testosterone undecanoate (Nebido(®)) or a mixture of 30 mg testosterone propionate, 60 mg testosterone phenylpropionate, 60 mg testosterone isocaproate, and 100 mg testosterone decanoate (Sustanon(®)). Blood was collected throughout a testing period of 60 days. The applied analytical method for blood analysis included liquid-liquid extraction and preparation of oxime derivatives, prior to TLX-sample clean-up and liquid chromatography-tandem mass spectrometry (LC-MS/MS) detection. All investigated testosterone esters could be detected in post-administration blood samples. The detection time depended on the type of ester administered. Furthermore, results from the study show that measured blood concentrations of especially short-chained testosterone esters are influenced by the type of blood collection device applied. The testosterone ester detection window, however, was comparable. PMID:26695486

  3. Simulations of Cellulose Translocation in the Bacterial Cellulose Synthase Suggest a Regulatory Mechanism for the Dimeric Structure of Cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Knott, Brandon C.; Crowley, Michael F.; Himmel, Michael E.; Zimmer, Jochen; Beckham, Gregg T.

    2016-05-01

    The processive cycle of the bacterial cellulose synthase (Bcs) includes the addition of a single glucose moiety to the end of a growing cellulose chain followed by the translocation of the nascent chain across the plasma membrane. The mechanism of this translocation and its precise location within the processive cycle are not well understood. In particular, the molecular details of how a polymer (cellulose) whose basic structural unit is a dimer (cellobiose) can be constructed by adding one monomer (glucose) at a time are yet to be elucidated. Here, we have utilized molecular dynamics simulations and free energy calculations to the shed light on these questions. We find that translocation forward by one glucose unit is quite favorable energetically, giving a free energy stabilization of greater than 10 kcal mol-1. In addition, there is only a small barrier to translocation, implying that translocation is not rate limiting within the Bcs processive cycle (given experimental rates for cellulose synthesis in vitro). Perhaps most significantly, our results also indicate that steric constraints at the transmembrane tunnel entrance regulate the dimeric structure of cellulose. Namely, when a glucose molecule is added to the cellulose chain in the same orientation as the acceptor glucose, the terminal glucose freely rotates upon forward motion, thus suggesting a regulatory mechanism for the dimeric structure of cellulose. We characterize both the conserved and non-conserved enzyme-polysaccharide interactions that drive translocation, and find that 20 of the 25 residues that strongly interact with the translocating cellulose chain in the simulations are well conserved, mostly with polar or aromatic side chains. Our results also allow for a dynamical analysis of the role of the so-called 'finger helix' in cellulose translocation that has been observed structurally. Taken together, these findings aid in the elucidation of the translocation steps of the Bcs

  4. Celluloses filled ENR/PVC membranes for palm oil mill effluent (POME) treatment

    Science.gov (United States)

    Shamsuddin, Mohd Razali; Abdullah, Ibrahim; Othaman, Rizafizah

    2013-11-01

    Membranes from composite materials have been used especially in water treatment applications. In this paper the composite membranes of celluloses filled ENR/PVC were successfully prepared for POME treatment application. The preparation of the membrane involves solution blending, casting, phase inversion and drying methods. Two types of fillers, cellulose (Cell) and cellulose grafting polymethyl methacrylate (Cell-g-PMMA) were added into ENR/PVC matrix in various compositions (1, 5, 10, 15 and 20 wt%) to determine the effect of the filler to the performance of the membrane. The membranes were characterized by using FTIR and SEM. Membrane properties in terms of porosity and water flux were examined using mathematical calculation. FTIR spectrum shows the existence of stretching vibration from the functional group of ester carbonyl, -C=O at peak 1725 cm-1 that belongs to Cell-g-PMMA filler in ENR/PVC/Cell-g-PMMA membrane which makes the membranes slightly hydrophobic. SEM micrographs exhibit that pores were formed on both ENR/PVC/Cell and ENR/PVC/Cell-g-PMMA membranes. Water flux test indicates that ENR/PVC/Cell-20% was the highest because the addition of Cell increases the hydrophilicity of the membrane. In POME treatment, ENR/PVC/Cell-20% and ENR/PVC/Cell-g-PMMA-10% showed the highest decolorization.

  5. HYDROLYTIC DEGRADATION BEHAVIOR OF PLLA NANOCOMPOSITES REINFORCED WITH MODIFIED CELLULOSE NANOCRYSTALS

    Directory of Open Access Journals (Sweden)

    Everton Luiz de Paula

    2015-09-01

    Full Text Available Bionanocomposites derived from poly(L-Lactide (PLLA were reinforced with chemically modified cellulose nanocrystals (m-CNCs. The effects of these modified cellulose nanoparticles on the mechanical and hydrolytic degradation behavior of polylactide were studied. The m-CNCs were prepared by a method in which hydrolysis of cellulose chains is performed simultaneously with the esterification of hydroxyl groups to produce modified nanocrystals with ester groups. FTIR, elemental analysis, TEM, XRD and contact angle measurements were used to confirm and characterize the chemical modifications of the m-CNCs. These bionanocomposites gave considerably better mechanical properties than neat PLLA based on an approximately 100% increase in tensile strength. Due to the hydrophobic properties of the esterified nanocrystals incorporated into a polymer matrix, it was also demonstrated that a small amount of m-CNCs could lead to a remarkable decrease in the hydrolytic degradation rate of the biopolymer. In addition, the m-CNCs considerably delay the degradation of the nanocomposite by providing a physical barrier that prevents the permeation of water, which thus hinders the overall absorption of water into the matrix. The results obtained in this study show the nanocrystals can be used to reinforce polylactides and fine-tune their degradation rates in moist or physiological environments.

  6. Pharmacopoeial and physicochemical properties of α-cellulose and microcrystalline cellulose powders derived from cornstalks

    Directory of Open Access Journals (Sweden)

    Chukwuemeka P Azubuike

    2012-01-01

    Full Text Available Background: Suitable α-cellulose and microcrystalline cellulose powders for use in the pharmaceutical industry can be derived from agricultural wastes. Aims: The pharmacopoeial and physicochemical properties of cornstalk α-cellulose (CCC and cornstalk microcrystalline cellulose powders (MCCC were compared to a commercial brand of microcrystalline cellulose (Avicel PH101 to evaluate their usefulness as pharmaceutical excipients. Settings and Design: Physicochemical properties of an excipient play a very crucial role in the functions of the excipient; hence, these properties were evaluated and compared with a commercial brand. Materials and Methods: α-cellulose was extracted from cornstalks. Modification of this α-cellulose powder was carried out by its partial hydrolysis with hydrochloric acid (HCl to obtain a microcrystalline cellulose powder. Their pharmacopoeial, physicochemical and microbiological properties were evaluated using standard methods. Statistical Analysis: OriginPro 8 SR2 v. 0891 (B891 software (OriginLab Corporation USA was used for statistical evaluation. One-way analysis of variance was used to differentiate between samples and decide where significant differences were established. Results: The yield of α-cellulose from the cornstalks was 32.5%w/w and that of microcrystalline cellulose 26%w/w. All the cellulose samples met all the pharmacopoeial parameters that were carried out. The comparison of physicochemical properties of the CCC, MCCC and Avicel PH101 suggests that the microcrystalline celluloses might have better flow and compression properties than the CCC sample. The three cellulose powders were of high microbial excipient quality. For almost all parameters evaluated, it was generally observed that the MCCC has similar characteristics to Avicel PH101. Conclusions: MCCC can be a suitable alternative to the expensive Avicel PH101as pharmaceutical excipients.

  7. ESTER - a European source term evaluation system

    International Nuclear Information System (INIS)

    The Commission of the European Communities (CEC) sponsors considerable model development and validation in the area of Light Water Reactor (LWR) source term, and naturally wishes to see the results used as widely as possible. It also has a role in fostering collaboration between European teams involved in source term analysis, for which purpose Phebus-Fission Product (FP) is acting as a focal point. To further both aims the Joint Research Centre (JRC) decided in 1989 to sponsor the development of the best-estimate code ESTER, which is both a software environment and a set of coupled source term modules which when completed should offer potentialities not currently available within Europe. This paper describes first the overall architecture of ESTER, then the component parts: the tools and services, the user interface, and the modules which perform the physics and chemistry calculations, emphasizing the design choices which have been made. The quality assurance system for the whole system is also reviewed. Contributions from the model developers, both underway, and expected, are then surveyed in the context of the overall development of ESTER, and the planning of the creation and extension of ESTER is given. The paper closes with some proposals for sharing ESTER within Europe and for ensuring its maintenance and continued rational development. (Author)

  8. Anaerobic degradation kinetics of a cholesteryl ester.

    Science.gov (United States)

    Gutiérrez, S; Viñas, M

    2003-01-01

    The most important components of wool scouring effluent grease are esters of sterols. Cholesteryl palmitate (CP) is the main ester in this grease. In this paper, the influence of the ester concentration in the anaerobic digestion and the relative rate of the different degradation steps, are studied. The experiment was carried out to measure methane production in the anaerobic degradation of acetate, palmitic acid (PA) and CP. A first-order kinetic model was assumed for hydrolysis and Monod models were assumed for both the methanogenic and acetogenic steps. Maximum hydrolysis rate was found to be around 20 times faster than the maximum methanogenic reaction rate during the experience. The lanolin emulsion drop size effect was also evaluated employing fine and coarse stock lanolin emulsions and no adapted sludge. Concentrations of 13.7 to 4.6 gCOD x l(-1) were employed. In a previous study, the effect of palmitic acid emulsion size was found important when similar sludge was tested. When esters are degraded, a significant effect of drop size on the degradation rate was not found. The difference between CP and PA emulsions behavior could be due to the fact that cholesterol produced during the ester degradation has a protective effect on the sludge. PMID:14640211

  9. Synthesis of bioreductive esters from fungal compounds.

    Science.gov (United States)

    Weerapreeyakul, Natthida; Anorach, Rutchayaporn; Khuansawad, Thidarut; Yenjai, Chavi; Isaka, Masahiko

    2007-06-01

    Four new bioreductive esters (7-10) have been synthesized. Their structures composed of trimethyl lock containing quinone propionic acid with an ester linkage to the fungal cytotoxic compounds; preussomerin G (1), preussomerin I (2), phaseolinone (3) and phomenone (4). The synthesized esters are aimed to act via reductive activation specifically at the cancer cells, resulting from hypoxia and overexpression of reductases. Hence, the toxicity will be lessened during distribution across the normal cells. The anticancer activity was determined in cancer cell lines with reported reductase i.e., BC-1 cells and NCI-H187 as well as in non-reductase containing cancer cells; KB cells. When considering each cell lines, result showed that structure modification giving to 7-10 led to less cytotoxicity than their parent compounds (1-4). Both 7 and 8 were strongly cytotoxic (IC50 < or = 5 microg/ml) to NCI-H187, whereas 9 and 10 were moderately cytotoxic (IC50 = 6-10 microg/ml) to BC-1 cells. Additional study of stability of represented phenolic ester (8) and an alcoholic ester (9) were performed. Result illustrated that both 8 and 9 were stable in the presence of esterase. Therefore, the cytotoxicity of the synthesized compounds (8-10) might be due to partial bioreductive activation in the cancer cells. PMID:17541198

  10. Degradation of cellulose by basidiomycetous fungi.

    Science.gov (United States)

    Baldrian, Petr; Valásková, Vendula

    2008-05-01

    Cellulose is the main polymeric component of the plant cell wall, the most abundant polysaccharide on Earth, and an important renewable resource. Basidiomycetous fungi belong to its most potent degraders because many species grow on dead wood or litter, in environment rich in cellulose. Fungal cellulolytic systems differ from the complex cellulolytic systems of bacteria. For the degradation of cellulose, basidiomycetes utilize a set of hydrolytic enzymes typically composed of endoglucanase, cellobiohydrolase and beta-glucosidase. In some species, the absence of cellobiohydrolase is substituted by the production of processive endoglucanases combining the properties of both of these enzymes. In addition, systems producing hydroxyl radicals based on cellobiose dehydrogenase, quinone redox cycling or glycopeptide-based Fenton reaction are involved in the degradation of several plant cell wall components, including cellulose. The complete cellulolytic complex used by a single fungal species is typically composed of more than one of the above mechanisms that contribute to the utilization of cellulose as a source of carbon or energy or degrade it to ensure fast substrate colonization. The efficiency and regulation of cellulose degradation differs among wood-rotting, litter-decomposing, mycorrhizal or plant pathogenic fungi and yeasts due to the different roles of cellulose degradation in the physiology and ecology of the individual groups. PMID:18371173

  11. Recycling of cellulosic fibers by enzymatic process.

    Science.gov (United States)

    Shojaei, K M; Dadashian, F; Montazer, M

    2012-02-01

    In this research, enzymatic treatment as an environmental friendly process has been used for recycling process of old cellulosic wastes such as cotton, viscose, and lyocell. Cellulase hydrolyses cellulosic chains and shortens cellulosic fibers. This study investigates to detect the optimum enzyme concentration and time of treatments for suitable changes of length and weight loss. The main purposes of this article are shortening of cellulosic fibers and evaluating of enzymatic treatment in different kind of cellulosic fibers. According to the data of experiments, with the increase of enzyme concentration and the treatment time, the length and weight loss percentage of the cellulosic fibers has been decreased. The length and weight loss percentage of treated viscose is more than that of lyocell and cotton fibers. Optimized condition, reaction time, and enzyme concentration have been determined by mean length of treated cellulosic samples. Suitable longitudinal distribution of fiber for papermaking industries is in the range of 0 to 4 mm. Optimum enzyme concentration and treatment time for recycling cotton, lyocell, and viscose fibers are 2% and 48 h for cotton and lyocell and 0.5% and 48 h for viscose, respectively. According to the data of experiment, the length of treated fibers is appropriate for its usage as a raw material in papermaking industries. PMID:22161212

  12. A novel cellulose hydrogel prepared from its ionic liquid solution

    Institute of Scientific and Technical Information of China (English)

    LI Lu; LIN ZhangBi; YANG Xiao; WAN ZhenZhen; CUI ShuXun

    2009-01-01

    A novel cellulose hydrogel is prepared by regenerating cellulose from its ionic liquid solution. The transparency cellulose hydrogel presents a good chemical stability and an acceptable mechanical property. This non-toxic cellulose hydrogel should be biocompatibie and may be useful in the future as a biomaterial.

  13. Colonization of Crystalline Cellulose by Clostridium cellulolyticum ATCC 35319

    OpenAIRE

    Gelhaye, E.; Gehin, A; Petitdemange, H.

    1993-01-01

    Cellulose colonization by Clostridium cellulolyticum was studied by using [methyl-3H]thymidine incorporation. The colonization process indicated that a part of the bacterial population was released from cellulose to the liquid phase before binding and colonizing another adhesion site of the cellulose. We postulate that cellulose colonization occurs according to the following process: adhesion, colonization, release, and readhesion.

  14. Surface modification of cellulose nanocrystals

    Institute of Scientific and Technical Information of China (English)

    WANG Neng; DING Enyong; CHENG Rongshi

    2007-01-01

    In order to improve the dispersibility of cellulose nanocrystal(CNC) particles,three difierent grafted reactions of acetylation,hydroxyethylation and hydroxypropylation were introduced to modify the CNC surface.The main advantages of these methods were the simple and easily controlled reaction conditions,and the dispersibility of the resulting products was distinctly improved.The properties of the modified CNC were characterized by means of Fourier transform infrared spectroscopy(FT-IR),13 C nuclear magnetic resonance(NMR),transmission electron microscopy(TEM)and thermogravimetric analyses(TGA).The results indicated mat after desiccation,the modification products could be dispersed again in the proper solvents by ultrasonic treatments,and the diameter of their particles had no obvious changes.However,their thermal degradation behaviors were quite different.The initial decomposition temperature of the modified products via hydroxyethylation or hydroxypropylation was lower than that of modified products via acetylation.

  15. Determination of Odor Release in Hydrocolloid Model Systems Containing Original or Carboxylated Cellulose at Different pH Values Using Static Headspace Gas Chromatographic (SHS-GC Analysis

    Directory of Open Access Journals (Sweden)

    Pahn-Shick Chang

    2013-02-01

    Full Text Available Static headspace gas chromatographic (SHS-GC analysis was performed to determine the release of 13 odorants in hydrocolloid model systems containing original or regio-selectively carboxylated cellulose at different pH values. The release of most odor compounds was decreased in the hydrocolloid solutions compared to control, with the amounts of 2-propanol, 3-methyl-1-butanol, and 2,3-butanedione released into the headspace being less than those of any other odor compound in the hydrocolloid model systems. However, there was no considerable difference between original cellulose-containing and carboxylated-cellulose containing systems in the release of most compounds, except for relatively long-chain esters such as ethyl caprylate and ethyl nonanoate. The release from the original and carboxylated cellulose solutions controlled to pH 10 was significantly higher than that from solutions adjusted to pH 4 and 7 in the case of some esters (ethyl acetate, methyl propionate, ethyl propionate, ethyl butyrate, butyl propionate, ethyl caproate and alcohols (2-propanol, 3-methyl-1-butanol, in particular, ethyl butyrate and 3-methyl-1-butanol. In contrast, the release of 2,3-butanedione from both the original and carboxylated cellulose solutions was increased at pH 4 and 7 compared to that at pH 10 by about 70% and 130%, respectively. Our study demonstrated that the release of some odorants could be changed significantly by addition of both original and carboxylated cellulose in hydrocolloid model systems, but only minor effect was observed in pH of the solution.

  16. Lyocell, The New Generation of Regenerated Cellulose

    Directory of Open Access Journals (Sweden)

    Éva Borbély

    2008-06-01

    Full Text Available For the majority of the last century, commercial routes to regenerated cellulosefibres have coped with the difficulties of making a good cellulose solution by using an easyto dissolve derivative (e.g. xanthane in the case of viscose rayon or complex (e.g.cuprammonium rayon. For the purposes of this paper, advanced cellulosic fibres aredefined as those made from a process involving direct dissolution of cellulose. The firstexamples of such fibres have now been generically designaed as lyocell fibres todistinguish them from rayons, and the first commercial lyocell fibre is Courtaulds’ Tencel.

  17. Preparation of membranes from cellulose obtained of sugarcane bagasse

    International Nuclear Information System (INIS)

    In this work, cellulose obtained from sugarcane bagasse to produce both cellulose and acetylated cellulose to prepare asymmetric membranes. Membranes was procedure used a mixture of materials of DMAc/ LiCl systemic in different conditions. Cellulose and acetylated cellulose were characterized by thermogravimetric (TG), Xray diffraction (XRD) and scanning Electron Microscopy (SEM). Observed less stability thermal of acetylated cellulose when compared of cellulose. All membranes procedure were asymmetric, characterized by presence of a dense skin and porous support can be observed. SEM showed that the morphology of the superficial of membranes depends on the method preparation. (author)

  18. Hydrolyzability of xylan after adsorption on cellulose: Exploration of xylan limitation on enzymatic hydrolysis of cellulose.

    Science.gov (United States)

    Wang, Xiao; Li, Kena; Yang, Ming; Zhang, Junhua

    2016-09-01

    During pretreatment of lignocellulosic materials, the dissolved xylan would re-adsorb on cellulose, and then inhibits the cellulose hydrolysis by cellulases. However, the hydrolyzability of xylan adsorbed on cellulose is not clear. In this work, the adsorption behavior of xylans on celluloses and the hydrolysis of adsorbed xylan by xylanase (XYL) were investigated. The results indicated that the adsorption of beechwood xylan (BWX) and oat spelt xylan (OSX) on Avicel was conformed to Langmuir-type adsorption isotherm. Higher ion strength increased the adsorption of BWX on Avicel, but not that of OSX. Both BWX and OSX adsorbed on Avicel and corn stover after dilute acid pretreatment (CS-DA) could be hydrolyzed by XYL. Compared to OSX, BWX adsorbed on cellulosic materials could be more easily hydrolyzed by XYL. Thus, supplementation of XYL could hydrolyze the xylan adsorbed on cellulose and potentially improved hydrolysis efficiency of lignocelluloses. PMID:27185150

  19. Homogeneous preparation of cellulose acetate propionate (CAP) and cellulose acetate butyrate (CAB) from sugarcane bagasse cellulose in ionic liquid.

    Science.gov (United States)

    Huang, Kelin; Wang, Ben; Cao, Yan; Li, Huiquan; Wang, Jinshu; Lin, Weijiang; Mu, Chaoshi; Liao, Dankui

    2011-05-25

    Cellulose acetate butyrate (CAB) and cellulose acetate propionate (CAP) were prepared homogeneously in a 1-allyl-3-methylimidazolium chloride (AmimCl) ionic liquid system from sugarcane bagasse (SB). The reaction temperature, reaction time, and molar ratio of butyric (propionic) anhydride/anhydroglucose units in the cellulose affect the butyryl (B) or propionyl (P) content of CAB or CAP samples. The (13)C NMR data revealed the distribution of the substituents of CAB and CAP. The thermal stability of sugar cane bagasse cellulose was found by thermogravimetric analysis to have decreased after chemical modification. After reaction, the ionic liquid was effectively recycled and reused. This study provides a new way for high-value-added utilization of SB and realizing the objective of turning waste into wealth. PMID:21452895

  20. Brittle Culm1, a COBRA-like protein, functions in cellulose assembly through binding cellulose microfibrils.

    Directory of Open Access Journals (Sweden)

    Lifeng Liu

    Full Text Available Cellulose represents the most abundant biopolymer in nature and has great economic importance. Cellulose chains pack laterally into crystalline forms, stacking into a complicated crystallographic structure. However, the mechanism of cellulose crystallization is poorly understood. Here, via functional characterization, we report that Brittle Culm1 (BC1, a COBRA-like protein in rice, modifies cellulose crystallinity. BC1 was demonstrated to be a glycosylphosphatidylinositol (GPI anchored protein and can be released into cell walls by removal of the GPI anchor. BC1 possesses a carbohydrate-binding module (CBM at its N-terminus. In vitro binding assays showed that this CBM interacts specifically with crystalline cellulose, and several aromatic residues in this domain are essential for binding. It was further demonstrated that cell wall-localized BC1 via the CBM and GPI anchor is one functional form of BC1. X-ray diffraction (XRD assays revealed that mutations in BC1 and knockdown of BC1 expression decrease the crystallite width of cellulose; overexpression of BC1 and the CBM-mutated BC1s caused varied crystallinity with results that were consistent with the in vitro binding assay. Moreover, interaction between the CBM and cellulose microfibrils was largely repressed when the cell wall residues were pre-stained with two cellulose dyes. Treating wild-type and bc1 seedlings with the dyes resulted in insensitive root growth responses in bc1 plants. Combined with the evidence that BC1 and three secondary wall cellulose synthases (CESAs function in different steps of cellulose production as revealed by genetic analysis, we conclude that BC1 modulates cellulose assembly by interacting with cellulose and affecting microfibril crystallinity.

  1. Reaction mechanisms in cellulose pyrolysis: a literature review

    Energy Technology Data Exchange (ETDEWEB)

    Molton, P.M.; Demmitt, T.F.

    1977-08-01

    A bibliographic review of 195 references is presented outlining the history of the research into the mechanisms of cellulose pyrolysis. Topics discussed are: initial product identification, mechanism of initial formation of levoglucosan, from cellulose and from related compounds, decomposition of cellulose to other compounds, formation of aromatics, pyrolysis of levoglucosan, crosslinking of cellulose, pyrolytic reactions of cellulose derivatives, and the effects of inorganic salts on the pyrolysis mechanism. (JSR)

  2. Preparation, characterisation and wetting of fluorinated cellulose surfaces

    OpenAIRE

    Aulin, Christian

    2007-01-01

    This thesis deals with the wetting by oil mixtures of two different model cellulose surfaces. The surfaces studied were a regenerated cellulose (RG) surface prepared by spin-coating, and a film consisting of polyelectrolyte multilayers (PEM) of Poly(ethyleneimine) (PEI) and a carboxymethylated Microfibrillated Cellulose (MFC). After coating or covalently modifying the cellulose surfaces with various amounts of fluorosurfactants, the fluorinated cellulose films were used to follow the spreadin...

  3. Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications

    OpenAIRE

    Alain Dufresne; Gilberto Siqueira; Julien Bras

    2010-01-01

    Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have s...

  4. Spray-Dried Cellulose Nanofibers as Novel Tablet Excipient

    OpenAIRE

    Kolakovic, Ruzica; Peltonen, Leena; Laaksonen, Timo; Putkisto, Kaisa; Laukkanen, Antti; Hirvonen, Jouni

    2011-01-01

    The purpose of this study was to evaluate the potential of cellulose nanofibers (also referred as microfibrillated cellulose, nanocellulose, nanofibrillated, or nanofibrillar cellulose) as novel tabletting material. For this purpose, physical and mechanical properties of spray-dried cellulose nanofibers (CNF) were examined, and results were compared to those of two commercial grades of microcrystalline cellulose (MCC), Avicel PH101 and Avicel PH102, which are the most commonly and widely used...

  5. Hydrolytic and Oxidative Mechanisms Involved in Cellulose Degradation

    OpenAIRE

    Nutt, Anu

    2006-01-01

    The enzymatic degradation of cellulose is an important process in nature. This thesis has focused on the degradation of cellulose by enzymes from two cellulose-degrading fungi, Hypocrea jecorina and Phanerochaete chrysosporium, including both the action of the individual enzymes and their synergistic interplay. The end-preference of cellobiohydrolases on crystalline cellulose was studied. Cellobiohydrolases belonging to glycosyl hydrolase (GH) family 7 were found to hydrolyse cellulose proce...

  6. Role of bacterial cellulose fibrils in Agrobacterium tumefaciens infection.

    OpenAIRE

    Matthysse, A G

    1983-01-01

    During the attachment of Agrobacterium tumefaciens to carrot tissue culture cells, the bacteria synthesize cellulose fibrils. We examined the role of these cellulose fibrils in the attachment process by determining the properties of bacterial mutants unable to synthesize cellulose. Such cellulose-minus bacteria attached to the carrot cell surface, but, in contrast to the parent strain, with which larger clusters of bacteria were seen on the plant cell, cellulose-minus mutant bacteria were att...

  7. Fabrication of polyaniline/carboxymethyl cellulose/cellulose nanofibrous mats and their biosensing application

    International Nuclear Information System (INIS)

    Graphical abstract: - Highlights: • PANI nanorods have been grown onto the surface of CMC/cellulose nanofibers for the fabrication of biosensor substrate material. • The proposed laccase biosensor exhibited a low detection limit and high sensitivity in the detection of catechol. • Hierarchical PANI/CMC/cellulose nanofibers are the promising material in the design of high-efficient biosensors. - Abstract: We report a facile approach to synthesizing and immobilizing polyaniline nanorods onto carboxymethyl cellulose (CMC)-modified cellulose nanofibers for their biosensing application. Firstly, the hierarchical PANI/CMC/cellulose nanofibers were fabricated by in situ polymerization of aniline on the CMC-modified cellulose nanofiber. Subsequently, the PANI/CMC/cellulose nanofibrous mat modified with laccase (Lac) was used as biosensor substrate material for the detection of catechol. PANI/CMC/cellulose nanofibers with highly conductive and three dimensional nanostructure were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), Fourier transform infrared spectra (FT-IR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under optimum conditions, the Lac/PANI/CMC/cellulose/glassy carbon electrode (GCE) exhibited a fast response time (within 8 s), a linear response range from 0.497 μM to 2.27 mM with a high sensitivity and low detection limit of 0.374 μM (3σ). The developed biosensor also displayed good repeatability, reproducibility as well as selectivity. The results indicated that the composite mat has potential application in enzyme biosensors

  8. Fabrication of polyaniline/carboxymethyl cellulose/cellulose nanofibrous mats and their biosensing application

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Jiapeng, E-mail: firgexiao@sina.cn; Pang, Zengyuan, E-mail: pangzengyuan1212@163.com; Yang, Jie, E-mail: young1993@126.com; Huang, Fenglin, E-mail: flhuang@jiangnan.edu.cn; Cai, Yibing, E-mail: yibingcai@jiangnan.edu.cn; Wei, Qufu, E-mail: qfwei@jiangnan.edu.cn

    2015-09-15

    Graphical abstract: - Highlights: • PANI nanorods have been grown onto the surface of CMC/cellulose nanofibers for the fabrication of biosensor substrate material. • The proposed laccase biosensor exhibited a low detection limit and high sensitivity in the detection of catechol. • Hierarchical PANI/CMC/cellulose nanofibers are the promising material in the design of high-efficient biosensors. - Abstract: We report a facile approach to synthesizing and immobilizing polyaniline nanorods onto carboxymethyl cellulose (CMC)-modified cellulose nanofibers for their biosensing application. Firstly, the hierarchical PANI/CMC/cellulose nanofibers were fabricated by in situ polymerization of aniline on the CMC-modified cellulose nanofiber. Subsequently, the PANI/CMC/cellulose nanofibrous mat modified with laccase (Lac) was used as biosensor substrate material for the detection of catechol. PANI/CMC/cellulose nanofibers with highly conductive and three dimensional nanostructure were characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), Fourier transform infrared spectra (FT-IR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under optimum conditions, the Lac/PANI/CMC/cellulose/glassy carbon electrode (GCE) exhibited a fast response time (within 8 s), a linear response range from 0.497 μM to 2.27 mM with a high sensitivity and low detection limit of 0.374 μM (3σ). The developed biosensor also displayed good repeatability, reproducibility as well as selectivity. The results indicated that the composite mat has potential application in enzyme biosensors.

  9. Affinity labelling enzymes with esters of aromatic sulfonic acids

    Science.gov (United States)

    Wong, Show-Chu; Shaw, Elliott

    1977-01-01

    Novel esters of aromatic sulfonic acids are disclosed. The specific esters are nitrophenyl p- and m-amidinophenylmethanesulfonate. Also disclosed is a method for specific inactivation of the enzyme, thrombin, employing nitrophenyl p-amidinophenylmethanesulfonate.

  10. Rapid saccharification for production of cellulosic biofuels.

    Science.gov (United States)

    Lee, Dae-Seok; Wi, Seung Gon; Lee, Soo Jung; Lee, Yoon-Gyo; Kim, Yeong-Suk; Bae, Hyeun-Jong

    2014-04-01

    The economical production of biofuels is hindered by the recalcitrance of lignocellulose to processing, causing high consumption of processing enzymes and impeding hydrolysis of pretreated lignocellulosic biomass. We determined the major rate-limiting factor in the hydrolysis of popping pre-treated rice straw (PPRS) by examining cellulase adsorption to lignin and cellulose, amorphogenesis of PPRS, and re-hydrolysis. Based on the results, equivalence between enzyme loading and the open structural area of cellulose was required to significantly increase productive adsorption of cellulase and to accelerate enzymatic saccharification of PPRS. Amorphogenesis of PPRS by phosphoric acid treatment to expand open structural area of the cellulose fibers resulted in twofold higher cellulase adsorption and increased the yield of the first re-hydrolysis step from 13% to 46%. The total yield from PPRS was increased to 84% after 3h. These results provide evidence that cellulose structure is one of major effects on the enzymatic hydrolysis. PMID:24607460

  11. Carboxymethylation of Cellulose by Microwave irradiation

    Institute of Scientific and Technical Information of China (English)

    YE; Jun

    2001-01-01

    Cellulose may be readily converted into ethers involving primary and secondary alcohol groups in each monomer unit and the glycosidic bonds. However, these reactions are rather more complicated than with simple substances, because the stereochemistry of the cellulose molecule is such that the vast majority of its hydroxyl groups form intra-chain hydrogen bonds or inter-chain hydrogen bonds with contiguous molecules. Carboxymethylcellulose (CMC) has played an important part in the commercial uses of cellulose derivatives. CMC becomes alkali and water soluble. The polarity can, in fact, be increased by introduction of ionizing groups, ie carboxymethyl group. CMC is generally produced by the reaction of alkali cellulose with chloroacetic acid.……

  12. Cellulosic ethanol is ready to go

    Energy Technology Data Exchange (ETDEWEB)

    Burke, M. [SunOpta BioProcess Group, Brampton, ON (Canada)

    2006-07-01

    A corporate overview of the SunOpta organization was presented. The organization includes three divisions, notably organic food, industrial minerals, and a bioprocess group. It is a Canadian organization that has experienced over 60 per cent growth per year since 1999. The presentation provided a history of the bioprocess group from 1973 to 2003. The presentation also illustrated the biomass process from wood, straw or corn stover to cellulosic ethanol and acetone and butanol. Several images were presented. The production of xylitol from oat hulls and birch and from ryegrass straw to linerboard was also illustrated. Last, the presentation illustrated the biomass production of cellulose, hemicellulose and lignin extraction as well as the ammonia pretreatment of cellulosics. The presentation also listed several current and future developments such as an expansion plan and implementation of cellulosic ethanol. Economic success was defined as requiring proximity to market; high percentage concentration to distillation; and co-located within existing infrastructure. figs.

  13. NF EN 14103. July 2003. Fatty compounds derived products. Fatty acids methylic esters (FAME). Determination of the ester and methylic ester content of linoleic acid; NF EN 14103. Juillet 2003. Produits derives des corps gras. Esters methyliques d'acides gras (EMAG). Determination de la teneur en ester et en ester methylique de l'acide linolenique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This European standard aims at determining the ester and methylic ester content of fatty acids methylic esters (FAME) used as pure bio-fuels or as constituent of a heating or diesel fuel. This method allows also to determine the methylic ester content of linoleic acid. It allows to verify that the ester content of FAMEs is greater than 90% (m/m) and that the linoleic acid content is comprised between 1% (m/m) and 15% (m/m). The method is applicable to FAMEs with methylic ester contents comprised between C14 and C24. (J.S.)

  14. Interlaboratory evaluation of cellulosic acid-soluble internal air sampling capsules for multi-element analysis.

    Science.gov (United States)

    Andrews, Ronnee N; Feng, H Amy; Ashley, Kevin

    2016-01-01

    An interlaboratory study was carried out to evaluate the use of acid-soluble cellulosic air sampling capsules for their suitability in the measurement of trace elements in workplace atmospheric samples. These capsules are used as inserts to perform closed-face cassette sample collection for occupational exposure monitoring. The interlaboratory study was performed in accordance with NIOSH guidelines that describe statistical procedures for evaluating measurement accuracy of air monitoring methods. The performance evaluation materials used consisted of cellulose acetate capsules melded to mixed-cellulose ester filters that were dosed with multiple elements from commercial standard aqueous solutions. The cellulosic capsules were spiked with the following 33 elements of interest in workplace air monitoring: Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, In, K, La, Li, Mg, Mn, Mo, Ni, P, Pb, Sb, Se, Sn, Sr, Te, Ti, Tl, V, W, Y, Zn, Zr. The elemental loading levels were certified by an accredited provider of certified reference materials. Triplicates of media blanks and multielement-spiked capsules at three different elemental loadings were sent to each participating laboratory; the elemental loading levels were not revealed to the laboratories. The volunteer participating laboratories were asked to prepare the samples by acid dissolution and to analyze aliquots of extracted samples by inductively coupled plasma atomic emission spectrometry in accordance with NIOSH methods. It was requested that the study participants report their analytical results in units of μg of each target element per internal capsule sample. For the majority of the elements investigated (30 out of 33), the study accuracy estimates obtained satisfied the NIOSH accuracy criterion (A < 25%). This investigation demonstrates the utility of acid-soluble internal sampling capsules for multielement analysis by atomic spectrometry. PMID:26308974

  15. Cellulose whisker/epoxy resin nanocomposites

    OpenAIRE

    Tang, Liming; Weder, Christoph

    2010-01-01

    New nanocomposites composed of cellulose nanofibers or “whiskers” and an epoxy resin were prepared. Cellulose whiskers with aspect ratios of ∼10 and ∼84 were isolated from cotton and sea animals called tunicates, respectively. Suspensions of these whiskers in dimethylformamide were combined with an oligomeric difunctional diglycidyl ether of bisphenol A with an epoxide equivalent weight of 185−192 and a diethyl toluenediamine-based curing agent. Thin films were produced by casting these mixtu...

  16. Nanopores Structure in Electrospun Bacterial Cellulose

    OpenAIRE

    Pierre Basmaji; Gabriel Molina de Olyveira; Ligia Maria Manzine Costa; Lauro Xavier Filho

    2011-01-01

    Bacterial cellulose (BC) has established to be a remarkably versatile biomaterial and can be used in wide variety of applied scientific endeavours, especially for medical devices, lately, bacterial cellulose mats are used in the treatment of skin conditions such as burns and ulcers, because of the morphology of fibrous biopolymers serving as a support for cell proliferation, its pores allow gas exchange between the organism and the environment. Moreover, the nanostructure and morphological si...

  17. Cellulose composite structures – by design

    OpenAIRE

    Winkworth-Smith, Charles G.

    2015-01-01

    The aim of the work presented in this thesis was to investigate different mechanical and chemical pre-treatments which can dramatically change the properties of native cellulose and add alternative routes to structure formation. Ball milled cellulose, which had a reduced crystallinity, degree of polymerisation and degradation temperature, was rehydrated in excess water resulting in recrystallisation. Fully amorphous samples recrystallised to the more thermodynamically stable type II polymorph...

  18. Nanosized Cellulose Fibrils as Stabilizer of Emulsions

    OpenAIRE

    Xhanari, Klodian

    2011-01-01

    Pickering emulsions have been a subject of research for many years due to their practical applications not only in everyday life products but also in industry. The stability of these emulsions is due to the irreversible adsorption of colloid particles at the oil/water interface which prevents droplet coalescence. Cellulose materials are among the different types of particles used as stabilizers. Most of the studies report the use of native cellulose as stabilizer of oil-in-water emulsions due...

  19. Production of Cellulosic Polymers from Agricultural Wastes

    OpenAIRE

    Israel, A. U.; I. B. Obot; Umoren, S. A.; Mkpenie, V.; Asuquo, J. E.

    2008-01-01

    Cellulosic polymers namely cellulose, di-and triacetate were produced from fourteen agricultural wastes; Branch and fiber after oil extraction from oil palm (Elais guineensis), raffia, piassava, bamboo pulp, bamboo bark from raphia palm (Raphia hookeri), stem and cob of maize plant (Zea mays), fruit fiber from coconut fruit (Cocos nucifera), sawdusts from cotton tree (Cossypium hirsutum), pear wood (Manilkara obovata), stem of Southern gamba green (Andropogon tectorus), sugarcane baggase (Sac...

  20. Long-lived testosterone esters in the rat.

    OpenAIRE

    Borg, W; Shackleton, C. H.; Pahuja, S L; Hochberg, R B

    1995-01-01

    Over the past decade it has become increasingly clear that steroid hormones are enzymatically esterified with fatty acids. These steroidal esters are the natural analogs of synthetic esters that are used therapeutically. One such family of pharmacological steroids is the synthetic alkyl esters of testosterone, androgens with great hormonal potency. We have investigated whether testosterone esters exist naturally by using the rat as a model. Most tissues of male rats, including blood, have ver...

  1. Biohydrogen, bioelectricity and bioalcohols from cellulosic materials

    Energy Technology Data Exchange (ETDEWEB)

    Nissila, M.

    2013-03-01

    The demand for renewable energy is increasing due to increasing energy demand and global warming associated with increasing use of fossil fuels. Renewable energy can be derived from biological production of energy carriers from cellulosic biomass. These biochemical processes include biomass fermentation to hydrogen, methane and alcohols, and bioelectricity production in microbial fuel cells (MFCs). The objective of this study was to investigate the production of different energy carriers (hydrogen, methane, ethanol, butanol, bioelectricity) through biochemical processes. Hydrogen production potential of a hot spring enrichment culture from different sugars was determined, and hydrogen was produced continuously from xylose. Cellulolytic and hydrogenic cultures were enriched on cellulose, cellulosic pulp materials, and on silage at different process conditions. The enrichment cultures were further characterized. The effect of acid pretreatment on hydrogen production from pulp materials was studied and compared to direct pulp fermentation to hydrogen. Electricity and alcohol(s) were simultaneously produced from xylose in MFCs and the exoelectrogenic and alcohologenic enrichment cultures were characterized. In the end, the energy yields obtained from different biochemical processes were determined and compared. In this study, cultures carrying out simultaneous cellulose hydrolysis and hydrogen fermentation were enriched from different sources at different operational conditions. These cultures were successfully utilized for cellulose to hydrogen fermentation in batch systems. Based on these results further research should be conducted on continuous hydrogen production from cellulosic materials.

  2. Nanofibrillar cellulose films for controlled drug delivery.

    Science.gov (United States)

    Kolakovic, Ruzica; Peltonen, Leena; Laukkanen, Antti; Hirvonen, Jouni; Laaksonen, Timo

    2012-10-01

    Nanofibrillar cellulose (NFC) (also referred to as cellulose nanofibers, nanocellulose, microfibrillated, or nanofibrillated cellulose) has gotten recent and wide attention in various research areas. Here, we report the application of nanofibrillar cellulose as a matrix-former material for long-lasting (up to three months) sustained drug delivery. Film-like matrix systems with drug loadings between 20% and 40% were produced by a filtration method. This simple production method had an entrapment efficacy>90% and offers a possibility for the film thickness adjustment as well as applicability in the incorporation of heat sensitive compounds. The films had excellent mechanical properties suitable for easy handling and shape tailoring of the drug release systems. They were characterized in terms of the internal morphology, and the physical state of the encapsulated drug. The drug release was assessed by dissolution tests, and suitable mathematical models were used to explain the releasing kinetics. The drug release was sustained for a three month period with very close to zero-order kinetics. It is assumed that the nanofibrillar cellulose film sustains the drug release by forming a tight fiber network around the incorporated drug entities. The results indicate that the nanofibrillar cellulose is a highly promising new material for sustained release drug delivery applications. PMID:22750440

  3. Cellulose fractionation with IONCELL-P.

    Science.gov (United States)

    Stepan, A M; Monshizadeh, A; Hummel, M; Roselli, A; Sixta, H

    2016-10-01

    IONCELL-P is a solvent fractionation process, which can separate pulps almost quantitatively into pure cellulose and hemicellulose fractions using IL-water mixtures. In this work the role of the molecular weight of cellulose on its solubility in ionic liquid-water mixtures is studied. The aim of this study was to understand and identify the determining factors of this IONCELL-P fractionation. Cotton linters (CL) served as model cellulose substrate and was degraded by ozone treatment to adjust the molecular weight to that of hemicelluloses and low molar mass cellulose in commercial pulps. The ozone treated CLs were subjected to the IONCELL-P process using 1-ethyl-3-methylimidazolium acetate ([emim][OAc]) and water mixtures with a water content between 13.5 and 19wt%. Based on the molar mass distributions of dissolved and undissolved cellulose the effect of the molecular weight of cellulose in IL-water mixture appears to be a key factor in the fractionation process. PMID:27312618

  4. Isolation of cellulose microfibrils - An enzymatic approach

    Directory of Open Access Journals (Sweden)

    Sain, M.

    2006-11-01

    Full Text Available Isolation methods and applications of cellulose microfibrils are expanding rapidly due to environmental benefits and specific strength properties, especially in bio-composite science. In this research, we have success-fully developed and explored a novel bio-pretreatment for wood fibre that can substantially improve the microfibril yield, in comparison to current techniques used to isolate cellulose microfibrils. Microfibrils currently are isolated in the laboratory through a combination of high shear refining and cryocrushing. A high energy requirement of these procedures is hampering momentum in the direction of microfibril isolation on a sufficiently large scale to suit potential applications. Any attempt to loosen up the microfibrils by either complete or partial destruction of the hydrogen bonds before the mechanical process would be a step forward in the quest for economical isolation of cellulose microfibrils. Bleached kraft pulp was treated with OS1, a fungus isolated from Dutch Elm trees infected with Dutch elm disease, under different treatment conditions. The percentage yield of cellulose microfibrils, based on their diameter, showed a significant shift towards a lower diameter range after the high shear refining, compared to the yield of cellulose microfibrils from untreated fibres. The overall yield of cellulose microfibrils from the treated fibres did not show any sizeable decrease.

  5. Acrylic Acid and Esters Will Be Oversupply

    Institute of Scientific and Technical Information of China (English)

    Zheng Chengwang

    2007-01-01

    @@ Drastic capacity growth The production capacity of acrylic acid in China has grown drastically in recent years. With the completion of the 80 thousand t/a acrylic acid and 130 thous and t/a acrylic ester project in Shenyang Paraffin Chemical Industrial Co., Ltd., (CCR2006,No. 31) the capacity of acrylic acid in China has reached 882 thousand t/a.

  6. Correlation and prediction of mixing thermodynamic properties of ester-containing systems: Ester + alkane and ester + ester binary systems and the ternary dodecane + ethyl pentanoate + ethyl ethanoate

    International Nuclear Information System (INIS)

    Highlights: ► Excess enthalpies and volumes were measured for ester–ester–alkane. ► Mixing behaviour for ester–ester, ester–alkane and ester–ester–alkane are analyzed. ► Correlations with a new polynomial model reproduce well the mixing properties. ► UNIFAC predictions for hE result acceptable excluding the ester–ester mixtures. - Abstract: Excess thermodynamic properties VmE and HmE, have been measured for the ternary mixture dodecane + ethyl pentanoate + ethyl ethanoate and for the corresponding binaries dodecane + ethyl pentanoate, dodecane + ethyl ethanoate, ethyl pentanoate + ethyl ethanoate at 298.15 K. All mixtures show endothermic and expansive effects. Experimental results are correlated with a suitable equation whose final form for the excess ternary quantity ME contains the particular contributions of the three binaries (i–j) and a last term corresponding to the ternary, all of them obtained considering fourth-order interactions. The fit goodness for all mixtures is good and comparable to others equations taken from the literature. In this work the dissolution model for the binaries and ternary is analyzed with a special attention to ester–ester binaries whose behaviour is discussed. The application of the UNIFAC group contribution model to estimate the HmE yields acceptable results for the binaries (with the exception of ester–ester) and for the ternary mixture.

  7. Technetium and rhenium tracers with metabolizable ester functions

    International Nuclear Information System (INIS)

    Re-DMSA (dimercaptosuccinic acid) ester complexes were prepored by ligand exchange reactions. To determine whether the ester band in Re-DMSA ester complexes is susceptible to cleavage by esterases, incubation experiments with tissue homogenates and plasma were carried out. (BBR)

  8. 40 CFR 721.3085 - Brominated phthalate ester.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Brominated phthalate ester. 721.3085... Substances § 721.3085 Brominated phthalate ester. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as brominated phthalate ester (PMN P-90-581)...

  9. 21 CFR 175.210 - Acrylate ester copolymer coating.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Acrylate ester copolymer coating. 175.210 Section... COATINGS Substances for Use as Components of Coatings § 175.210 Acrylate ester copolymer coating. Acrylate ester copolymer coating may safely be used as a food-contact surface of articles intended for...

  10. Determination of Mass Spectrometric Sensitivity of Different Metalloporphyrin Esters Relative to Porphyrin Ester

    DEFF Research Database (Denmark)

    Larsen, Elfinn; Egsgaard, Helge; Møller, J.;

    1977-01-01

    Quantitative determination of metalloporphyrin contamination in preparations of biologically important porphyrins was achieved mass spectrometrically by application of the integrated ion current technique. For this purpose, the relative molecular ion sensitivities of the contaminating metal...... complexes were determined from the ratios of the integrated molecular ion currents of a series of calibration samples containing a porphyrin ester and one of its metal complexes in known molar ratio. Complexes formed with divalent ions of Cu, Zn, Fe, Co and Ni of copro- as well as uro......-prophyrin permethylester were all found to have the same molecular ion sensitivities as their metal-free porphyrin ester. The relative metalloporphyrin ester content in a sample of porphyrin ester was thus obtained directly as the integrated ion current ratios of the normalized molecular ions. The preparation of...

  11. Ester Tuiksoo - Eesti esimene naissoost põllumajandusminister / Ester Tuiksoo ; interv. Toomas Verrev

    Index Scriptorium Estoniae

    Tuiksoo, Ester, 1965-

    2007-01-01

    Ametist lahkuv põllumajandusminister Ester Tuiksoo räägib saadud juhtimiskogemusest, Euroopa Liidu ühise põllumajanduspoliitika juurutamisest, rahvuskala valimisest, Rahvaliidu käekäigust parlamendivalimistel

  12. Half esters and coating compositions comprising reactions products of half esters and polyepoxides

    OpenAIRE

    Blaauw, R; Mulder, W J; Koelewijn, R.; Boswinkel, G.

    2006-01-01

    The present invention relates to half esters based on dicarboxylic acid derivatives and dimer fatty diols, wherein the dimer fatty dio ls are based on dimerised and/or trimerised and/or oligomerised unsaturated fatty acids. The present invention further relates to resin compositions based on the half ester and an polyepoxide. The resin composition can be used in high solids coatings, inks, adhesives, wall covering products, flooring products and plastic products

  13. Expanding the modular ester fermentative pathways for combinatorial biosynthesis of esters from volatile organic acids.

    Science.gov (United States)

    Layton, Donovan S; Trinh, Cong T

    2016-08-01

    Volatile organic acids are byproducts of fermentative metabolism, for example, anaerobic digestion of lignocellulosic biomass or organic wastes, and are often times undesired inhibiting cell growth and reducing directed formation of the desired products. Here, we devised a general framework for upgrading these volatile organic acids to high-value esters that can be used as flavors, fragrances, solvents, and biofuels. This framework employs the acid-to-ester modules, consisting of an AAT (alcohol acyltransferase) plus ACT (acyl CoA transferase) submodule and an alcohol submodule, for co-fermentation of sugars and organic acids to acyl CoAs and alcohols to form a combinatorial library of esters. By assembling these modules with the engineered Escherichia coli modular chassis cell, we developed microbial manufacturing platforms to perform the following functions: (i) rapid in vivo screening of novel AATs for their catalytic activities; (ii) expanding combinatorial biosynthesis of unique fermentative esters; and (iii) upgrading volatile organic acids to esters using single or mixed cell cultures. To demonstrate this framework, we screened for a set of five unique and divergent AATs from multiple species, and were able to determine their novel activities as well as produce a library of 12 out of the 13 expected esters from co-fermentation of sugars and (C2-C6) volatile organic acids. We envision the developed framework to be valuable for in vivo characterization of a repertoire of not-well-characterized natural AATs, expanding the combinatorial biosynthesis of fermentative esters, and upgrading volatile organic acids to high-value esters. Biotechnol. Bioeng. 2016;113: 1764-1776. © 2016 Wiley Periodicals, Inc. PMID:26853081

  14. Synthesis of 11C labelled methyl esters: transesterification of enol esters versus BF3 catalysed esterification-a comparative study

    International Nuclear Information System (INIS)

    C-11 labelled methyl esters have been synthesized via the transesterification of enol esters in the presence of C-11 methanol and 1,3 dichlorodibutylstannoxane as catalyst. This method leaves functional groups intact and allows access to a wider variety of C-11 labelled methyl esters compared to the BF3 catalysed ester formation, which uses carboxylic acids and C-11 methanol as starting materials

  15. Cellulose nanofibers from Curaua fibers

    International Nuclear Information System (INIS)

    Curaua is a plant from Amazon region whose leaves were used by the indians of the region to make nets, ropes, fishing wires, etc., due to their high mechanical resistance. Nowadays, some industries, mainly textile and automobile, have increased their interest on these fibers to prepare polymer composites, because their properties could be compared to composites with glass fibers. In this work, cellulose nanofibers were obtained from curaua fibers, which were submitted to alkaline treatment with a solution of NaOH 5%. Nanofibers, in watery suspension, were characterized morphologically by TEM and AFM, and they show needle like format and the ratio L/D of 14. The suspension was dried by freeze dried process, in vacuum and air circulation oven, and these nanofibers were analyzed by x-ray diffraction, presenting high crystalline index, and by thermogravimetric analysis (TGA), which showed that nanofibers have poorer thermal stability than the treated fiber, but they can reach values next to the ones of the original fibers, depending on the drying process of the suspension. (author)

  16. Degradation of γ-irradiated cellulose by the accumulating culture of a cellulose bacterium

    International Nuclear Information System (INIS)

    Possibility of degradation of γ-irradiated cellulose by the accumulating culture of an anaerobic cellulose bacterium has been investigated. Cellulose irradiation by γ-quanta (Co60) has been carried out using the RKh-30 device with 35.9 Gy/min dose rate. Radiation monitoring has been carried out by the standard ferrosulfate method. Samples have been irradiated in dry state or when water presenting with MGy. It is detected that the accumulating culture with the growth on the irradiated cellulose has a lag-phase, which duration reduces when the cellulose cleaning by flushing with distillation water. The culture has higher growth and substrate consumption rate when growing by cellulose irradiated in comparison with non-irradiated one. The economical coefficient is the same in using both the irradiated and non-irradiated cellulose. The quantity of forming reducing saccharides, organic acids, methane and carbon dioxide is the same both when cultivating by irradiated cellulose and by non-irradiated. pH of the culture liquid is shifted to the acid nature in the process of growth

  17. Preparation of cellulose II and IIII films by allomorphic conversion of bacterial cellulose I pellicles

    International Nuclear Information System (INIS)

    The structural changes resulting from the conversion of native cellulose I (Cel I) into allomorphs II (Cel II) and IIII (Cel IIII) have usually been studied using powder samples from plant or algal cellulose. In this work, the conversion of Cel I into Cel II and Cel IIII was performed on bacterial cellulose films without any mechanical disruption. The surface texture of the films was observed by atomic force microscopy (AFM) and the morphology of the constituting cellulose ribbons, by transmission electron microscopy (TEM). The structural changes were characterized using solid-state NMR spectroscopy as well as X-ray and electron diffraction. The allomorphic change into Cel II and Cel IIII resulted in films with different crystallinity, roughness and hydrophobic/hydrophilicity surface and the films remained intact during all process of allomorphic conversion. - Highlights: • Description of a method to modify the allomorphic structure of bacterial cellulose films • Preparation of films with specific morphologies and hydrophobic/hydrophilic surface characters • First report on cellulose III films from bacterial cellulose under swelling conditions • Detailed characterization of cellulose II and III films with complementary techniques • Development of films with specific properties as potential support for cells, enzymes, and drugs

  18. Cellulose-clay layered nanocomposite films fabricated from aqueous cellulose/LiOH/urea solution.

    Science.gov (United States)

    Yang, Quanling; Wu, Chun-Nan; Saito, Tsuguyuki; Isogai, Akira

    2014-01-16

    Transparent and flexible cellulose-clay (montmorillonite, MTM) nanocomposite films are prepared from cellulose/LiOH/urea solutions. The results show that the composites possess intercalated nanolayered structures. Almost no Na ions are present in MTM, probably because they are substituted by Li ions. The nanocomposite films possess high mechanical strength and gas barrier properties, and lower coefficients of thermal expansion than those of the original cellulose film. In particular, the composite film of 85% cellulose and 15% MTM has the highest tensile strength and Young's modulus 161 and 180% greater than those of the 100% cellulose film, and coefficient of thermal expansion and oxygen permeability at 50-75% RH decrease to 60 and 42-33%, respectively. Moreover, the initial hydrophilic nature of cellulose film changes to somewhat hydrophobic through incorporation of hydrophilic MTM platelets. This is probably because the orientation of cellulose chains on the film surface changes by the formation of numerous hydrogen bonds between cellulose molecules and MTM platelets. PMID:24188852

  19. Engineering of a novel cellulose-adherent cellulolytic Saccharomyces cerevisiae for cellulosic biofuel production

    Science.gov (United States)

    Liu, Zhuo; Ho, Shih-Hsin; Sasaki, Kengo; den Haan, Riaan; Inokuma, Kentaro; Ogino, Chiaki; van Zyl, Willem H.; Hasunuma, Tomohisa; Kondo, Akihiko

    2016-01-01

    Cellulosic biofuel is the subject of increasing attention. The main obstacle toward its economic feasibility is the recalcitrance of lignocellulose requiring large amount of enzyme to break. Several engineered yeast strains have been developed with cellulolytic activities to reduce the need for enzyme addition, but exhibiting limited effect. Here, we report the successful engineering of a cellulose-adherent Saccharomyces cerevisiae displaying four different synergistic cellulases on the cell surface. The cellulase-displaying yeast strain exhibited clear cell-to-cellulose adhesion and a “tearing” cellulose degradation pattern; the adhesion ability correlated with enhanced surface area and roughness of the target cellulose fibers, resulting in higher hydrolysis efficiency. The engineered yeast directly produced ethanol from rice straw despite a more than 40% decrease in the required enzyme dosage for high-density fermentation. Thus, improved cell-to-cellulose interactions provided a novel strategy for increasing cellulose hydrolysis, suggesting a mechanism for promoting the feasibility of cellulosic biofuel production. PMID:27079382

  20. Laser cleaning of particulates from paper: Comparison between sized ground wood cellulose and pure cellulose

    International Nuclear Information System (INIS)

    Visible laser cleaning of charcoal particulates from yellow acid mechanical ground wood cellulose paper was compared with that from bleached sulphite softwood cellulose paper. About one order of magnitude of fluence range is available for a cleaning dynamics between the cleaning threshold and the destruction threshold for two laser pulses. Wood cellulose paper exhibited a higher destruction threshold of the original paper than that of the contaminated specimen because of heat transfer from the hot or evaporating charcoal particulates. In contrast, the contaminated bleached cellulose paper exhibited a higher destruction threshold due to shading by the particulates. The graphite particles are not only detached thermo-mechanically, but also by evaporation or combustion. A cleaning effect was found also outside the illuminated areas due to lateral blasting. Infrared measurements revealed dehydration/dehydrogenation reactions and cross-links by ether bonds together with structural changes of the cellulose chain arrangement and the degree of crystallinity.

  1. Laser cleaning of particulates from paper: Comparison between sized ground wood cellulose and pure cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Arif, S.; Kautek, W., E-mail: wolfgang.kautek@univie.ac.at

    2013-07-01

    Visible laser cleaning of charcoal particulates from yellow acid mechanical ground wood cellulose paper was compared with that from bleached sulphite softwood cellulose paper. About one order of magnitude of fluence range is available for a cleaning dynamics between the cleaning threshold and the destruction threshold for two laser pulses. Wood cellulose paper exhibited a higher destruction threshold of the original paper than that of the contaminated specimen because of heat transfer from the hot or evaporating charcoal particulates. In contrast, the contaminated bleached cellulose paper exhibited a higher destruction threshold due to shading by the particulates. The graphite particles are not only detached thermo-mechanically, but also by evaporation or combustion. A cleaning effect was found also outside the illuminated areas due to lateral blasting. Infrared measurements revealed dehydration/dehydrogenation reactions and cross-links by ether bonds together with structural changes of the cellulose chain arrangement and the degree of crystallinity.

  2. Acid hydrolysis of cellulosic fibres: Comparison of bleached kraft pulp, dissolving pulps and cotton textile cellulose.

    Science.gov (United States)

    Palme, Anna; Theliander, Hans; Brelid, Harald

    2016-01-20

    The behaviour of different cellulosic fibres during acid hydrolysis has been investigated and the levelling-off degree of polymerisation (LODP) has been determined. The study included a bleached kraft pulp (both never-dried and once-dried) and two dissolving pulps (once-dried). Additionally, cotton cellulose from new cotton sheets and sheets discarded after long-time use was studied. Experimental results from the investigation, together with results found in literature, imply that ultrastructural differences between different fibres affect their susceptibility towards acid hydrolysis. Drying of a bleached kraft pulp was found to enhance the rate of acid hydrolysis and also result in a decrease in LODP. This implies that the susceptibility of cellulosic fibres towards acid hydrolysis is affected by drying-induced stresses in the cellulose chains. In cotton cellulose, it was found that use and laundering gave a substantial loss in the degree of polymerisation (DP), but that the LODP was only marginally affected. PMID:26572472

  3. Surface modification of cellulose by PCL grafts

    Energy Technology Data Exchange (ETDEWEB)

    Paquet, Olivier; Krouit, Mohammed; Bras, Julien [Laboratoire de Genie des Procedes Papetiers (UMR 5518 CNRS-CTP-INPG), Grenoble INP-Pagora, 461 Rue de la papeterie, F-38402 St Martin d' Heres (France); Thielemans, Wim [Driving Innovation in Chemistry and Chemical Engineering (DICE), School of Chemistry and Process and Environmental Research Division - Faculty of Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD (United Kingdom); Belgacem, Mohamed Naceur, E-mail: Naceur.Belgacem@efpg.inpg.fr [Laboratoire de Genie des Procedes Papetiers (UMR 5518 CNRS-CTP-INPG), Grenoble INP-Pagora, 461 Rue de la papeterie, F-38402 St Martin d' Heres (France)

    2010-02-15

    Two cellulosic substrates (microcrystalline cellulose, MCC, and bleached kraft softwood pulps, BSK) were grafted by polycaprolactone (PCL) chains with different molecular weights, following a three-step procedure using non-swelling conditions in order to limit the reaction to their surface. First, one of the two OH PCL ends was blocked by phenyl isocyanate and the reaction product (adduct 1) was subsequently reacted with 2,4-toluene diisocyanate (adduct 2) to provide it with an NCO function, capable of reacting with cellulose. The ensuing PCL-grafted cellulosic materials were characterized by weight gain, elemental analysis, contact angle measurements, attenuated total reflexion-Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and biodegradation tests. The modification was proven to occur by the presence of nitrogen atoms in the elemental analysis tests and XPS spectra of modified and soxhlet-extracted cellulose. The contact angle measurements have also shown that the surface became as hydrophobic as PCL itself. The polar component of the surface energy of cellulosic substrates before treatment was found to be about 32 and 10 mJ m{sup -2}, for MCC and BSK, respectively. This value vanished to practically zero after grafting with different PCLs. The strategy proposed in the present work is original since, to the best of our knowledge, this paper reports for the first time the chemical 'grafting onto' of the cellulose surface by PCL macromolecular structures, with the aim of obtaining fibre-matrix co-continuous fully sustainable and biodegradable composite materials.

  4. Effect of ionizing radiation on starch and cellulose

    International Nuclear Information System (INIS)

    The investigation is reported of the effects of ionizing radiation both on macromolecular systems generally and on polysaccharides, starch and cellulose. Attention is focused on changes in the physical and physico-chemical properties of starch and cellulose, such as starch swelling, gelation, viscosity, solubility, reaction with iodine, UV, IR and ESR spectra, chemical changes resulting from radiolysis and from the effect of amylases on irradiated starch, changes in cellulose fibre strength, water absorption, stain affinity, and also the degradation of cellulose by radiation and the effect of cellulases on irradiated cellulose. Practical applications of the findings concerning cellulose degradation are discussed. (author)

  5. Isolation and characterization of two cellulose morphology mutants of Gluconacetobacter hansenii ATCC23769 producing cellulose with lower crystallinity.

    Science.gov (United States)

    Deng, Ying; Nagachar, Nivedita; Fang, Lin; Luan, Xin; Catchmark, Jeffrey M; Tien, Ming; Kao, Teh-hui

    2015-01-01

    Gluconacetobacter hansenii, a Gram-negative bacterium, produces and secrets highly crystalline cellulose into growth medium, and has long been used as a model system for studying cellulose synthesis in higher plants. Cellulose synthesis involves the formation of β-1,4 glucan chains via the polymerization of glucose units by a multi-enzyme cellulose synthase complex (CSC). These glucan chains assemble into ordered structures including crystalline microfibrils. AcsA is the catalytic subunit of the cellulose synthase enzymes in the CSC, and AcsC is required for the secretion of cellulose. However, little is known about other proteins required for the assembly of crystalline cellulose. To address this question, we visually examined cellulose pellicles formed in growth media of 763 individual colonies of G. hansenii generated via Tn5 transposon insertion mutagenesis, and identified 85 that produced cellulose with altered morphologies. X-ray diffraction analysis of these 85 mutants identified two that produced cellulose with significantly lower crystallinity than wild type. The gene disrupted in one of these two mutants encoded a lysine decarboxylase and that in the other encoded an alanine racemase. Solid-state NMR analysis revealed that cellulose produced by these two mutants contained increased amounts of non-crystalline cellulose and monosaccharides associated with non-cellulosic polysaccharides as compared to the wild type. Monosaccharide analysis detected higher percentages of galactose and mannose in cellulose produced by both mutants. Field emission scanning electron microscopy showed that cellulose produced by the mutants was unevenly distributed, with some regions appearing to contain deposition of non-cellulosic polysaccharides; however, the width of the ribbon was comparable to that of normal cellulose. As both lysine decarboxylase and alanine racemase are required for the integrity of peptidoglycan, we propose a model for the role of peptidoglycan in the

  6. Isolation and characterization of two cellulose morphology mutants of Gluconacetobacter hansenii ATCC23769 producing cellulose with lower crystallinity.

    Directory of Open Access Journals (Sweden)

    Ying Deng

    Full Text Available Gluconacetobacter hansenii, a Gram-negative bacterium, produces and secrets highly crystalline cellulose into growth medium, and has long been used as a model system for studying cellulose synthesis in higher plants. Cellulose synthesis involves the formation of β-1,4 glucan chains via the polymerization of glucose units by a multi-enzyme cellulose synthase complex (CSC. These glucan chains assemble into ordered structures including crystalline microfibrils. AcsA is the catalytic subunit of the cellulose synthase enzymes in the CSC, and AcsC is required for the secretion of cellulose. However, little is known about other proteins required for the assembly of crystalline cellulose. To address this question, we visually examined cellulose pellicles formed in growth media of 763 individual colonies of G. hansenii generated via Tn5 transposon insertion mutagenesis, and identified 85 that produced cellulose with altered morphologies. X-ray diffraction analysis of these 85 mutants identified two that produced cellulose with significantly lower crystallinity than wild type. The gene disrupted in one of these two mutants encoded a lysine decarboxylase and that in the other encoded an alanine racemase. Solid-state NMR analysis revealed that cellulose produced by these two mutants contained increased amounts of non-crystalline cellulose and monosaccharides associated with non-cellulosic polysaccharides as compared to the wild type. Monosaccharide analysis detected higher percentages of galactose and mannose in cellulose produced by both mutants. Field emission scanning electron microscopy showed that cellulose produced by the mutants was unevenly distributed, with some regions appearing to contain deposition of non-cellulosic polysaccharides; however, the width of the ribbon was comparable to that of normal cellulose. As both lysine decarboxylase and alanine racemase are required for the integrity of peptidoglycan, we propose a model for the role of

  7. Biocompatibility of Bacterial Cellulose Based Biomaterials

    Directory of Open Access Journals (Sweden)

    Omar P. Troncoso

    2012-12-01

    Full Text Available Some bacteria can synthesize cellulose when they are cultivated under adequate conditions. These bacteria produce a mat of cellulose on the top of the culture medium, which is formed by a three-dimensional coherent network of pure cellulose nanofibers. Bacterial cellulose (BC has been widely used in different fields, such as the paper industry, electronics and tissue engineering due to its remarkable mechanical properties, conformability and porosity. Nanocomposites based on BC have received much attention, because of the possibility of combining the good properties of BC with other materials for specific applications. BC nanocomposites can be processed either in a static or an agitated medium. The fabrication of BC nanocomposites in static media can be carried out while keeping the original mat structure obtained after the synthesis to form the final nanocomposite or by altering the culture media with other components. The present article reviews the issue of biocompatibility of BC and BC nanocomposites. Biomedical aspects, such as surface modification for improving cell adhesion, in vitro and in vivo studies are given along with details concerning the physics of network formation and the changes that occur in the cellulose networks due to the presence of a second phase. The relevance of biocompatibility studies for the development of BC-based materials in bone, skin and cardiovascular tissue engineering is also discussed.

  8. Cellulose multilayer Membranes manufacture with Ionic liquid

    KAUST Repository

    Livazovic, S.

    2015-05-09

    Membrane processes are considered energy-efficient for water desalination and treatment. However most membranes are based on polymers prepared from fossil petrochemical sources. The development of multilayer membranes for nanofiltration and ultrafiltration, with thin selective layers of naturally available cellulose has been hampered by the availability of non-aggressive solvents. We propose the manufacture of cellulose membranes based on two approaches: (i) silylation, coating from solutions in tetrahydrofuran, followed by solvent evaporation and cellulose regeneration by acid treatment; (ii) casting from solution in 1-ethyl-3-methylimidazolum acetate ([C2mim]OAc), an ionic liquid, followed by phase inversion in water. By these methods porous supports could be easily coated with semi-crystalline cellulose. The membranes were hydrophilic with contact angles as low as 22.0°, molecular weight cut-off as low as 3000 g mol-1 with corresponding water permeance of 13.8 Lm−2 h−1 bar−1. Self-standing cellulose membranes were also manufactured without porous substrate, using only ionic liquid as green solvent. This membrane was insoluble in water, tetrahydrofuran, hexane, N,N-dimethylformamide, 1-methyl-2-pyrrolidinone and N,N-dimethylacetamide.

  9. Clean conversion of cellulose into fermentable glucose.

    Science.gov (United States)

    Sun, Yong; Zhuang, Junping; Lin, Lu; Ouyang, Pingkai

    2009-01-01

    We studied the process of conversion of microcrystalline-cellulose into fermentable glucose in the formic acid reaction system using cross polarization/magic angle spinning (13)C-nuclear magnetic resonance, X-ray diffraction and Fourier transform infrared spectroscopy. The results indicated that formic acid as an active agent was able to effectively penetrate into the interior space of the cellulose molecules, thus collapsing the rigid crystalline structure and allowing hydrolysis to occur easily in the amorphous zone as well as in the crystalline zone. The microcrystalline-cellulose was hydrolyzed using formic acid and 4% hydrochloric acid under mild conditions. The effects of hydrochloric acid concentration, the ratio of solid to liquid, temperature (55-75 degrees C) and retention time (0-9 h), and the concentration of glucose were analyzed. The hydrolysis velocities of microcrystalline-cellulose were 6.14 x 10(-3) h(-1) at 55 degrees C, 2.94 x 10(-2) h(-1) at 65 degrees C, and 6.84x10(-2) h(-1) at 75 degrees C. The degradation velocities of glucose were 0.01 h(-1) at 55 degrees C, 0.14 h(-1) at 65 degrees C, 0.34 h(-1) at 75 degrees C. The activation energy of microcrystalline-cellulose hydrolysis was 105.61 kJ/mol, and the activation energy of glucose degradation was 131.37 kJ/mol. PMID:19409478

  10. Atmospheric oxidation of selected alcohols and esters

    Energy Technology Data Exchange (ETDEWEB)

    Becker, K.H.; Cavalli, F.

    2001-03-01

    The decision whether it is appropriate and beneficial for the environment to deploy specific oxygenated organic compounds as replacements for traditional solvent types requires a quantitative assessment of their potential atmospheric impacts including tropospheric ozone and other photooxidant formation. This involves developing chemical mechanisms for the gasphase atmospheric oxidation of the compounds which can be reliably used in models to predict their atmospheric reactivity under a variety of environmental conditions. Until this study, there was very little information available concerning the atmospheric fate of alcohols and esters. The objectives of this study were to measure the atmospheric reaction rates and to define atmospheric reaction mechanisms for the following selected oxygenated volatile organic compounds: the alcohols, 1-butanol and 1-pentanol, and the esters, methyl propionate and dimethyl succinate. The study has successfully addressed these objectives. (orig.)

  11. Photoenolization of o-Methylvalerophenone Ester Derivative.

    Science.gov (United States)

    Das, Anushree; Lao, Emily A; Gudmundsdottir, Anna D

    2016-05-01

    Photolysis of ester 1 in argon-saturated methanol and acetonitrile does not produce any product, whereas irradiation of 1 in oxygen-saturated methanol yields peroxide 2. Laser flash photolysis studies demonstrate that 1 undergoes intramolecular H atom abstraction to form biradical 3 (λmax ~340 nm), which intersystem crosses to form photoenols Z-4 and E-4 (λmax ~380 nm). Photoenols 4 decay by regenerating ester 1. With the aid of density functional theory calculations, it was concluded the photoenol E-4 does not undergo spontaneous lactonization or electrocyclic ring closure because the transition state barriers for these reactions are too large to compete with reketonization of E-4 to form 1. PMID:27061950

  12. Naturally occurring antifungal aromatic esters and amides

    International Nuclear Information System (INIS)

    During the search of antifungal natural products from terrestrial plants, a new long chained aromatic ester named grandiflorate along with spatazoate from Portulaca grandiflora and N-[2-methoxy-2-(4-methoxyphenyl) ethyl]-trans-cinnamide and aegeline from Solanum erianthum of Nigeria were isolated and tested against six fungal species. The known constituents have not been reported so far from mentioned investigated plants. Structures of the isolated compounds were elucidated with the aid of spectroscopic techniques including two dimensional NMR experiments. Among the compounds, the esters found more potent than amides against Candida albicans and Aspergillus flavus. The new compound grandiflorate gave response against all tested fungal species while aegeline was found to give lowest inhibition during this study. (author)

  13. Gas chromatographic retention data of wax esters

    Czech Academy of Sciences Publication Activity Database

    Stránský, Karel; Zarevúcka, Marie; Valterová, Irena; Wimmer, Zdeněk

    2006-01-01

    Roč. 1128, č. 1/2 (2006), s. 208-219. ISSN 0021-9673 R&D Projects: GA ČR(CZ) GA203/04/0120; GA AV ČR(CZ) IAA4055403 Institutional research plan: CEZ:AV0Z40550506 Keywords : Wax esters * gas chromatography * Kováts index * Reduced Kováts index Subject RIV: CC - Organic Chemistry Impact factor: 3.554, year: 2006

  14. Synthesis of ester-siloxane multiblock copolymers

    OpenAIRE

    Antić Vesna V.; Vučković Marija V.; Govedarica Milutin N.

    2004-01-01

    It was shown that the two-stage transesterification/polycondensation reaction in the melt, can successfully be applied for the preparation of poly(butylene terephtalate-dimethylsiloxane) multiblock copolymers. Three series of co-polymers were synthesized, using poly(dimethylsiloxanes) bearing ester (two series) and hydroxy -end groups as reactants. The structure and composition of the obtained copolymers were determined by 1H NMR spectroscopy A mechanism, i.e. an order of reaction steps, invo...

  15. Ethyl ester production from (RBD palm oil

    Directory of Open Access Journals (Sweden)

    Oscar Mauricio Martínez Ávila

    2010-07-01

    Full Text Available This work develops a methodology for obtaining ethyl esters from RBD (refined, bleached and deodorised palm oil by evaluating the oil’s transesterification and separation. Two catalysts were first tested (KOH and NaOH by studying the effect of water presence on the reaction. The separation process was then evaluated by using water and water-salt and water-acid mixtures, establishing the agent offering the best results and carrying out the purification stage. Raw materials and products were characterised for comparing the latter with those obtained by traditional means and verifying the quality of the esters so produced; minimum differences were found bet-ween both. The proposed methodology thus allows esters to be used as raw material in petrochemical industry applications. A more profitable process can be obtained compared to those used today, given the amounts of separation agent so established (1% H3PO4 solution, in water. The overall process achieved 74.4% yield, based on the oil being used.

  16. POLYETHERSULFONE COMPOSITE MEMBRANE BLENDED WITH CELLULOSE FIBRILS

    Directory of Open Access Journals (Sweden)

    Ping Qu

    2010-09-01

    Full Text Available Polyethersulfone (PES is a common material used for ultrafiltration (UF membranes, which has good chemical resistance, high mechanical properties, and wide temperature tolerances. The hydrophobic property of the PES membrane seriously limits its application. Cellulose fibrils are composed of micro-sized and nano-sized elements, which have high hydrophilicity, strength, and biodegradation. A composite membrane was prepared by the phase inversion induced by an immersion process. The characteristics of the composite membrane were investigated with Fourier transform infrared spectroscopy (FTIR, X-ray diffraction (XRD, thermogravimetric analysis (TGA, and atomic force microscopy (AFM. The pure water flux of the composite membrane increased dramatically with the increase of cellulose firbils. Mean pore size and porosity were significantly increased. Both mechanical properties and hydrophilicity were enhanced due to the addition of the cellulose firbils.

  17. Prospects for Irradiation in Cellulosic Ethanol Production

    Directory of Open Access Journals (Sweden)

    Anita Saini

    2015-01-01

    Full Text Available Second generation bioethanol production technology relies on lignocellulosic biomass composed of hemicelluloses, celluloses, and lignin components. Cellulose and hemicellulose are sources of fermentable sugars. But the structural characteristics of lignocelluloses pose hindrance to the conversion of these sugar polysaccharides into ethanol. The process of ethanol production, therefore, involves an expensive and energy intensive step of pretreatment, which reduces the recalcitrance of lignocellulose and makes feedstock more susceptible to saccharification. Various physical, chemical, biological, or combined methods are employed to pretreat lignocelluloses. Irradiation is one of the common and promising physical methods of pretreatment, which involves ultrasonic waves, microwaves, γ-rays, and electron beam. Irradiation is also known to enhance the effect of saccharification. This review explains the role of different radiations in the production of cellulosic ethanol.

  18. Prospects for Irradiation in Cellulosic Ethanol Production.

    Science.gov (United States)

    Saini, Anita; Aggarwal, Neeraj K; Sharma, Anuja; Yadav, Anita

    2015-01-01

    Second generation bioethanol production technology relies on lignocellulosic biomass composed of hemicelluloses, celluloses, and lignin components. Cellulose and hemicellulose are sources of fermentable sugars. But the structural characteristics of lignocelluloses pose hindrance to the conversion of these sugar polysaccharides into ethanol. The process of ethanol production, therefore, involves an expensive and energy intensive step of pretreatment, which reduces the recalcitrance of lignocellulose and makes feedstock more susceptible to saccharification. Various physical, chemical, biological, or combined methods are employed to pretreat lignocelluloses. Irradiation is one of the common and promising physical methods of pretreatment, which involves ultrasonic waves, microwaves, γ-rays, and electron beam. Irradiation is also known to enhance the effect of saccharification. This review explains the role of different radiations in the production of cellulosic ethanol. PMID:26839707

  19. Magnetic alignment and patterning of cellulose fibers

    International Nuclear Information System (INIS)

    The alignment and patterning of cellulose fibers under magnetic fields are reported. Static and rotating magnetic fields were used to align cellulose fibers with sizes ranging from millimeter to nanometer sizes. Cellulose fibers of the millimeter order, which were prepared for papermaking, and much smaller fibers with micrometer to nanometer sizes prepared by the acid hydrolysis of larger ones underwent magnetic alignment. Under a rotating field, a uniaxial alignment of fibers was achieved. The alignment was successfully fixed by the photopolymerization of a UV-curable resin precursor used as matrix. A monodomain chiral nematic film was prepared from an aqueous suspension of nanofibers. Using a field modulator inserted in a homogeneous magnetic field, simultaneous alignment and patterning were achieved

  20. Magnetic alignment and patterning of cellulose fibers

    Directory of Open Access Journals (Sweden)

    Fumiko Kimura and Tsunehisa Kimura

    2008-01-01

    Full Text Available The alignment and patterning of cellulose fibers under magnetic fields are reported. Static and rotating magnetic fields were used to align cellulose fibers with sizes ranging from millimeter to nanometer sizes. Cellulose fibers of the millimeter order, which were prepared for papermaking, and much smaller fibers with micrometer to nanometer sizes prepared by the acid hydrolysis of larger ones underwent magnetic alignment. Under a rotating field, a uniaxial alignment of fibers was achieved. The alignment was successfully fixed by the photopolymerization of a UV-curable resin precursor used as matrix. A monodomain chiral nematic film was prepared from an aqueous suspension of nanofibers. Using a field modulator inserted in a homogeneous magnetic field, simultaneous alignment and patterning were achieved

  1. Magnetic alignment and patterning of cellulose fibers

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Fumiko; Kimura, Tsunehisa [Division of Forest and Biomaterials Science, Graduate School of Agriculture, Kyoto University, Kitashirakawa, Sakyo-ku, Kyoto 606-8502 (Japan)], E-mail: tkimura@kais.kyoto-u.ac.jp

    2008-04-01

    The alignment and patterning of cellulose fibers under magnetic fields are reported. Static and rotating magnetic fields were used to align cellulose fibers with sizes ranging from millimeter to nanometer sizes. Cellulose fibers of the millimeter order, which were prepared for papermaking, and much smaller fibers with micrometer to nanometer sizes prepared by the acid hydrolysis of larger ones underwent magnetic alignment. Under a rotating field, a uniaxial alignment of fibers was achieved. The alignment was successfully fixed by the photopolymerization of a UV-curable resin precursor used as matrix. A monodomain chiral nematic film was prepared from an aqueous suspension of nanofibers. Using a field modulator inserted in a homogeneous magnetic field, simultaneous alignment and patterning were achieved.

  2. Sulfated cellulose thin films with antithrombin affinity

    Directory of Open Access Journals (Sweden)

    2009-11-01

    Full Text Available Cellulose thin films were chemically modified by in situ sulfation to produce surfaces with anticoagulant characteristics. Two celluloses differing in their degree of polymerization (DP: CEL I (DP 215–240 and CEL II (DP 1300–1400 were tethered to maleic anhydride copolymer (MA layers and subsequently exposed to SO3•NMe3 solutions at elevated temperature. The impact of the resulting sulfation on the physicochemical properties of the cellulose films was investigated with respect to film thickness, atomic composition, wettability and roughness. The sulfation was optimized to gain a maximal surface concentration of sulfate groups. The scavenging of antithrombin (AT by the surfaces was determined to conclude on their potential anticoagulant properties.

  3. Cationic nanofibrillar cellulose with high antibacterial properties.

    Science.gov (United States)

    Chaker, Achraf; Boufi, Sami

    2015-10-20

    Cationic nanofibrillar cellulose (C-NFC) has been prepared via a high pressure homogenization using quaternized cellulose fibers with glycidyltrimethylammonium chloride. It has been shown that the quaternization of dried softwood pulp facilitated the defibrillation processes and prevented clogging of the homogenizer. The effects of the trimethylammonium chloride content on the fibrillation yield, the transparency degree of the gel, the rheological behavior of the NFC suspension and their electrokinetic properties were investigated. AFM observation showed that the NFC suspension consisted of individualized cellulose I nanofibrils 4-5nm in width and length in the micronic scale. In addition to their strong reinforcing potential, the inclusion of C-NFC into a polymer matrix was shown to efficiently enhance the antibacterial activity. The reinforcing potential of C-NFC, studied by dynamic mechanical analysis (DMA), was compared to anionic NFC and the difference was explained in terms of the nanofibrils capacities to build up a strong networks held by hydrogen bonding. PMID:26256179

  4. Segal crystallinity index revisited by the simulation of X-ray diffraction patterns of cotton cellulose Iβ and cellulose II.

    Science.gov (United States)

    Nam, Sunghyun; French, Alfred D; Condon, Brian D; Concha, Monica

    2016-01-01

    The Segal method estimates the amorphous fraction of cellulose Iβ materials simply based on intensity at 18° 2θ in an X-ray diffraction pattern and was extended to cellulose II using 16° 2θ intensity. To address the dependency of Segal amorphous intensity on crystal size, cellulose polymorph, and the degree of polymorphic conversion, we simulated the diffraction patterns of cotton celluloses (Iβ and II) and compared the simulated amorphous fractions with the Segal values. The diffraction patterns of control and mercerized cottons, respectively, were simulated with perfect crystals of cellulose Iβ (1.54° FWHM) and cellulose II (2.30° FWHM) as well as 10% and 35% amorphous celluloses. Their Segal amorphous fractions were 15% and 31%, respectively. The higher Segal amorphous fraction for control cotton was attributed to the peak overlap. Although the amorphous fraction was set in the simulation, the peak overlap induced by the increase of FWHM further enhanced the Segal amorphous intensity of cellulose Iβ. For cellulose II, the effect of peak overlap was smaller; however the lower reflection of the amorphous cellulose scattering in its Segal amorphous location resulted in smaller Segal amorphous fractions. Despite this underestimation, the relatively good agreement of the Segal method with the simulation for mercerized cotton was attributed to the incomplete conversion to cellulose II. The (1-10) and (110) peaks of cellulose Iβ remained near the Segal amorphous location of cellulose II for blends of control and mercerized cotton fibers. PMID:26453844

  5. Relaxation properties of natural and artificial cellulose materials

    International Nuclear Information System (INIS)

    Present article is devoted to relaxation properties of natural and artificial cellulose materials. Therefore the dielectric properties of natural and artificial cellulose materials depending on influence of frequency and temperature are studied.

  6. Preparation and evaluation of cellulose-dissolving magnetic ionic liquid

    OpenAIRE

    MURAOKA, Jin; Kamiya, Noriho; Ito, Yuji; ムラオカ, ジン; カミヤ, ノリホ; イトウ, ユウジ; 村岡, 仁; 神谷, 典穂; 伊東, 祐二

    2013-01-01

    Ionic liquids have attracted attention as potential pretreatment agents in cellulosic biomass processing. Here we report on a new magnetic ionic liquid that can dissolve crystalline cellulose and be collected by a magnet.

  7. Carboxymethyl ethers of cellulose obtained from secondary products of fine-stapled cotton

    International Nuclear Information System (INIS)

    This article is devoted to synthesis and properties of carboxymethyl ethers of cellulose obtained from secondary products of fine-stapled cotton. The investigation of extraction conditions of cellulose on the quality of carboxymethyl ethers of cellulose is conducted. The qualitative characteristics of cotton cellulose are considered. The synthesis of carboxymethyl ethers of cellulose from obtained cellulose is described.

  8. Pengaruh Katalis H2SO4 pada Reaksi Epoksidasi Metil Ester PFAD (Palm Fatty Acid Distillate)

    OpenAIRE

    Sinaga, Mersi Suriani

    2010-01-01

    Ester epoksi selain sebagai pelunak juga dapat memperbaiki ketahanan komponen polivinil klorida (PVC) terhadap panas dan cahaya. Penelitian ini dilakukan untuk merumuskan kondisi katalis yang sesuai bagi pembuatan senyawa epoksi metil ester PFAD dari senyawa metil ester PFAD. Metil ester PFAD terdiri dari ester lemak jenuh dan tidak jenuh., metode pemisahan kristalisasi dengan pelarut metanol untuk memisahkan ester lemak jenuh dari ester lemak tak jenuh, yang bertujuan meningkatkan kemamp...

  9. Effect of γ-radiation on the saccharification of cellulose

    International Nuclear Information System (INIS)

    The effect of gamma radiation on the acid and saccharification of agricultural cellulosic wastes was investigated. Radiation doses of 200 KGy and higher significantly increased the saccharification of rice straw, rice hull and corn husk. The observed radiation effects varied with the cellulosic material. Rice straw exhibited the greatest radiosensitivity while rice hull showed the least susceptibility to gamma radiation. Possible mechanisms for the radiation-induced degradation of cellulose and agricultural cellulosic wastes are discussed. (author)

  10. The pressure-volume-temperature relationship of cellulose

    OpenAIRE

    Jallabert, Bastien; Vaca Medina, Guadalupe; Cazalbou, Sophie; Rouilly, Antoine

    2013-01-01

    Pressure–volume–temperature (PVT) mea- surements of a-cellulose with different water contents, were performed at temperatures from 25 to 180 °C and pressures from 19.6 to 196 MPa. PVT measurements allowed observation of the combined effects of pressure and temperature on the specific volume during cellulose thermo-compression. All isobars showed a decrease in cellulose specific volume with temperature. This densification is associated with a transition process of the cellulose, occurring at a...

  11. Molecular dynamics simulation study of polyelectrolyte adsorption on cellulose surfaces

    OpenAIRE

    Biermann, Oliver

    2002-01-01

    The adsorption of two polyelectrolyte ((carboxy methyl) cellulose and poly(acrylate) in water on crystalline cellulose is studied in this work. The multi-component problem has been splitted up into simulations of solutions of the polyelectrolyte (polyanions including sodium counterions) in water, into simulations of the interface of crystalline cellulose towards water. Finally polyelectrolyte-cellulose systems were studied. Molecular dynamics simulations of diluted (_ 2:5 weight percent) aque...

  12. Microbial Cellulose Production from Bacteria Isolated from Rotten Fruit

    OpenAIRE

    Rangaswamy, B.E.; Vanitha, K. P.; Hungund, Basavaraj S.

    2015-01-01

    Microbial cellulose, an exopolysaccharide produced by bacteria, has unique structural and mechanical properties and is highly pure compared to plant cellulose. Present study represents isolation, identification, and screening of cellulose producing bacteria and further process optimization. Isolation of thirty cellulose producers was carried out from natural sources like rotten fruits and rotten vegetables. The bacterial isolates obtained from rotten pomegranate, rotten sweet potato, and rott...

  13. Review: current international research into cellulose nanofibres and nanocomposites

    OpenAIRE

    Eichhorn, S. J.; Dufresne, A; Aranguren, M.; Marcovich, N. E.; Capadona, J R; Rowan, S. J.; Weder, Christoph; Thielemans, W.; Roman, M.; Renneckar, S.; Gindl, W.; Veigel, S.; Keckes, J.; Yano, H.; Abe, K.

    2010-01-01

    This paper provides an overview of recent progress made in the area of cellulose nanofibre-based nanocomposites. An introduction into the methods used to isolate cellulose nanofibres (nanowhiskers, nanofibrils) is given, with details of their structure. Following this, the article is split into sections dealing with processing and characterisation of cellulose nanocomposites and new developments in the area, with particular emphasis on applications. The types of cellulose nanofibres covered a...

  14. Continuous Cellulosic Bioethanol Fermentation by Cyclic Fed-Batch Cocultivation

    OpenAIRE

    Jiang, He-Long; He, Qiang; He, Zhili; Hemme, Christopher L.; Wu, Liyou; Zhou, Jizhong

    2013-01-01

    Cocultivation of cellulolytic and saccharolytic microbial populations is a promising strategy to improve bioethanol production from the fermentation of recalcitrant cellulosic materials. Earlier studies have demonstrated the effectiveness of cocultivation in enhancing ethanolic fermentation of cellulose in batch fermentation. To further enhance process efficiency, a semicontinuous cyclic fed-batch fermentor configuration was evaluated for its potential in enhancing the efficiency of cellulose...

  15. Characterising the cellulose synthase complexes of cell walls

    NARCIS (Netherlands)

    Mansoori Zangir, N.

    2012-01-01

    One of the characteristics of the plant kingdom is the presence of a structural cell wall. Cellulose is a major component in both the primary and secondary cell walls of plants. In higher plants cellulose is synthesized by so called rosette protein complexes with cellulose synthases (CESAs) as the c

  16. Structural differences of xylans affect their interaction with cellulose

    NARCIS (Netherlands)

    Kabel, M.A.; Borne, van den H.; Vincken, J.P.; Voragen, A.G.J.; Schols, H.A.

    2007-01-01

    The affinity of xylan to cellulose is an important aspect of many industrial processes, e.g. production of cellulose, paper making and bio-ethanol production. However, little is known about the adsorption of structurally different xylans to cellulose. Therefore, the adsorption of various xylans to b

  17. Cyanobacterial cellulose synthesis in the light of the photanol concept

    NARCIS (Netherlands)

    R.M. Schuurmans; H.C.P. Matthijs; L.J. Stal; K.J. Hellingwerf

    2014-01-01

    The detailed knowledge already available about cellulose synthases and their regulation, plus emerging insights into the process of cellulose secretion in cyanobacteria make cellulose an attractive polymer for the application of the photanol concept in an economically viable production process. By v

  18. 16 CFR 501.6 - Cellulose sponges, irregular dimensions.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Cellulose sponges, irregular dimensions. 501... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.6 Cellulose sponges, irregular dimensions. Variety packages of cellulose sponges of irregular dimensions, are exempted from the requirements of § 500.25 of...

  19. Environmentally friendly properties of vegetable oil methyl esters

    Directory of Open Access Journals (Sweden)

    Gateau Paul

    2005-07-01

    Full Text Available Measurements were carried out on Vegetable Oil Methyl Esters (VOME or FAME answering the most recent specifications. The products tested are RME (Rapeseed oil Methyl Ester, ERME (Erucic Rapeseed oil Methyl Esters, SME (Sunflower oil Methyl Esters, and HOSME (High Oleic Sunflower oil Methyl Esters. They contain more than 99.5% of fatty acid mono esters. The compositions are given. VOME are not volatile and they are not easily flammable. They are not soluble in water and they are biodegradable. According to the methods implemented for the determination of the German classification of substances hazardous to waters WGK, they are not toxic on mammals and unlike diesel fuel they are not toxic on fish, daphnia, algae and bacteria. The RME is not either toxic for shrimps. According to tests on rabbits, RME and SME are not irritating for the skin and the eyes. VOME display particularly attractive environmental properties.

  20. Cellulose chain binding free energy drives the processive move of cellulases on the cellulose surface.

    Science.gov (United States)

    Wang, Yefei; Zhang, Shujun; Song, Xiangfei; Yao, Lishan

    2016-09-01

    Processivity is essential for cellulases in their catalysis of cellulose hydrolysis. But what drives the processive move is not well understood. In this work, we use Trichoderma reesei Cel7B as a model system and show that its processivity is directly correlated to the binding free energy difference of a cellulose chain occupying the binding sites -7 to +2 and that occupying sites -7 to -1. Several mutants that have stronger interactions with glycosyl units in sites +1 and +2 than the wild type enzyme show higher processivity. The results suggest that after the release of the product cellobiose located in sites +1 and +2, the enzyme pulls the cellulose chain to fill the vacant sites, which propels its processive move on the cellulose surface. Biotechnol. Bioeng. 2016;113: 1873-1880. © 2016 Wiley Periodicals, Inc. PMID:26928155

  1. Segal crystallinity index revisited by the simulation of X-ray diffraction patterns of cotton cellulose IB and cellulose II

    Science.gov (United States)

    The Segal method estimates the amorphous fraction of cellulose IB materials simply based on intensity at 18o 20 in an X-ray diffraction pattern and was extended to cellulose II using 16o 2O intensity. To address the dependency of Segal amorphous intensity on crystal size, cellulose polymorph, and th...

  2. Synthesis, Characterization and Properties of Vinyl Ester Matrix Resins

    OpenAIRE

    Li, Hui III

    1998-01-01

    Vinyl ester oligomers diluted with styrene are important matrix resins for thermosetting polymer composites. A major objective of this work has been to study the chemistry and kinetics of the cure reactions of vinyl ester resins at elevated curing temperatures, which are consistent with typical composite processing conditions. The crosslinking reaction of vinyl ester resins was studied by FTIR and the loss of the carbon-carbon double bonds of the methacrylate (943 cm-1) and styrene (910 cm-1...

  3. Use of Cellulose and Oxidized Cellulose Nanocrystals from Olive Stones in Chitosan Bionanocomposites

    OpenAIRE

    Abou-Zeid, Ragab E.; Hassan, Enas A.; Fedia Bettaieb; Ramzi Khiari; Mohammad L. Hassan

    2015-01-01

    Cellulose nanocrystals (CNC) and 2,2,6,6-tetramethyl-1-piperidinyloxyl- (TEMPO-) oxidized cellulose nanocrystals (CNC-TEMPO) were prepared from olive stones. The prepared nanocrystals were characterized using transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and carboxylic groups content determination. The prepared nanocrystals were used as reinforcing elements in chitosan nanocomposites, which were characterized using X-ray diffraction (XRD) and tensile ...

  4. Viscoelastic evaluation of topical creams containing microcrystalline cellulose/sodium carboxymethyl cellulose as stabilizer

    OpenAIRE

    Adeyeye, Moji Christianah; Jain, Ashwinkumar C.; Ghorab, Mohamed K. M.; Reilly, William J.

    2002-01-01

    The purpose of this study was to examine the viscoelastic properties of topical creams containing various concentrations of microcrystalline cellulose and sodium carboxymethyl cellulose (Avicel® CL-611) as a stabilizer. Avicel CL-611 was used at 4 different levels (1%, 2%, 4%, and 6% dispersion) to prepare topical creams, and hydrocortisone acetate was used as a model drug. The viscoelastic properties such as loss modulus (G), storage modulus (G), and loss tangent (tan δ) of these creams were...

  5. LUFFA CYLINDRICA AS A LIGNOCELLULOSIC SOURCE OF FIBER, MICROFIBRILLATED CELLULOSE, AND CELLULOSE NANOCRYSTALS

    OpenAIRE

    Gilberto Siqueira; Julien Bras; Alain Dufresne

    2010-01-01

    In this work the annual plant called Luffa cylindrica (LC) has been characterized and used to prepare macroscopic lignocellulosic fibers and cellulosic nanoparticles, viz. microfibrillated cellulose (MFC) and whiskers, each of which can be used as a reinforcing phase in bionanocomposites. The morphological, chemical, and physical properties of LC fibers were first characterized. The contents of lignin, hemicellulose, and other constituents were determined, and scanning electron microscopy (SE...

  6. Engineering of a novel cellulose-adherent cellulolytic Saccharomyces cerevisiae for cellulosic biofuel production

    OpenAIRE

    Zhuo Liu; Shih-Hsin Ho; Kengo Sasaki; Riaan den Haan; Kentaro Inokuma; Chiaki Ogino; van Zyl, Willem H; Tomohisa Hasunuma; Akihiko Kondo

    2016-01-01

    Cellulosic biofuel is the subject of increasing attention. The main obstacle toward its economic feasibility is the recalcitrance of lignocellulose requiring large amount of enzyme to break. Several engineered yeast strains have been developed with cellulolytic activities to reduce the need for enzyme addition, but exhibiting limited effect. Here, we report the successful engineering of a cellulose-adherent Saccharomyces cerevisiae displaying four different synergistic cellulases on the cell ...

  7. Environmental sustainability of cellulosic energy cropping systems

    Science.gov (United States)

    The environmental sustainability of bioenergy production depends on both direct and indirect effects of the production systems to produce bioenergy feedstocks. This chapter evaluates what is known about the environmental sustainability of cellulosic bioenergy crop production for the types of produc...

  8. Herstellung und Beurteilung funktionalisierter Cellulose-Tiefenfilterschichten

    OpenAIRE

    Lösch, Sebastian

    2016-01-01

    Gegenstand dieser Arbeit ist die Entwicklung funktionalisierter Cellulose-Tiefenfilterschichten. Dazu werden kommerzielle Kationenaustauscher in einer Kugelmühle nass zerkleinert und bei der Herstellung in die Tiefenfilterschichten eingebettet. Die mechanischen Eigenschaften und das Filtrationsverhalten dieser Schichten sind vergleichbar mit kommerziellen Produkten. Der maximale, technisch einsetzbare Masseanteil an Ionenaustauscher beträgt dabei ca. 40 %. In Durchströmungsversuchen wird die...

  9. Formation of asymmetric cellulose acetate membranes

    NARCIS (Netherlands)

    Bokhorst, H.; Altena, F.W.; Smolders, C.A.

    1981-01-01

    Cellulose acetate membranes were prepared from casting solutions containing dioxane as a solvent and varying concentrations (up to 6%) of maleic acid as an additive. Coagulation took place in water at different temperatures. The effect of these variables on membrane structure and membrane properties

  10. Evaluation of drug interactions with nanofibrillar cellulose.

    Science.gov (United States)

    Kolakovic, Ruzica; Peltonen, Leena; Laukkanen, Antti; Hellman, Maarit; Laaksonen, Päivi; Linder, Markus B; Hirvonen, Jouni; Laaksonen, Timo

    2013-11-01

    Nanofibrillar cellulose (NFC) (also referred to as cellulose nanofibers, nanocellulose, microfibrillated, or nanofibrillated cellulose) has recently gotten wide attention in various research areas and it has also been studied as excipient in formulation of the pharmaceutical dosage forms. Here, we have evaluated the interactions between NFC and the model drugs of different structural characteristics (size, charge, etc.). The series of permeation studies were utilized to evaluate the ability of the drugs in solution to diffuse through the thin, porous, dry NFC films. An incubation method was used to determine capacity of binding of chosen model drugs to NFC as well as isothermal titration calorimetry (ITC) to study thermodynamics of the binding process. A genetically engineered fusion protein carrying double cellulose binding domain was used as a positive control since its affinity and capacity of binding for NFC have already been reported. The permeation studies revealed the size dependent diffusion rate of the model drugs through the NFC films. The results of both binding and ITC studies showed that the studied drugs bind to the NFC material and indicated the pH dependence of the binding and electrostatic forces as the main mechanism. PMID:23774185

  11. Chemistry, Technology and Aplications of Oxidized Celluloses

    Czech Academy of Sciences Publication Activity Database

    Havelka, P.; Sopuch, T.; Hnatowicz, Vladimír; Suchý, P.; Masteikova, R.; Bajerová, M.; Gajdziok, J.; Milichovský, M.; Švorčík, V.

    2010-01-01

    Roč. 2010, C (2010), s. 205-245. ISBN 978-1-608-76-388-7 Institutional support: RVO:61389005 Keywords : oxidation * cellulose * in-vitro Subject RIV: BO - Biophysics https://www.novapublishers.com/catalog/product_info.php?products_id=14049

  12. Methacrylate hydrogels reinforced with bacterial cellulose

    Czech Academy of Sciences Publication Activity Database

    Hobzová, Radka; Dušková-Smrčková, Miroslava; Michálek, Jiří; Karpushkin, Evgeny; Gatenholm, P.

    2012-01-01

    Roč. 61, č. 7 (2012), s. 1193-1201. ISSN 0959-8103 R&D Projects: GA AV ČR KJB400500902 Institutional research plan: CEZ:AV0Z40500505 Keywords : bacterial cellulose * methacrylate hydrogel * composite Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.125, year: 2012

  13. Exploring the Nature of Cellulose Microfibrils

    Energy Technology Data Exchange (ETDEWEB)

    Su, Ying [Stony Brook Univ., NY (United States); Burger, Christian [Stony Brook Univ., NY (United States); Ma, Hongyang [Stony Brook Univ., NY (United States); Chu, Benjamin [Stony Brook Univ., NY (United States); Hsiao, Benjamin S. [Stony Brook Univ., NY (United States)

    2015-03-20

    Ultrathin cellulose microfibril fractions were extracted from spruce wood powder using combined delignification, TEMPO-catalyzed oxidation, and sonication processes. Small-angle X-ray scattering of these microfibril fractions in a “dilute” aqueous suspension (concentration 0.077 wt %) revealed that their shape was in the form of nanostrip with 4 nm width and only about 0.5 nm thicknesses. We found that these dimensions were further confirmed by TEM and AFM measurements. The 0.5 nm thickness implied that the nanostrip could contain only a single layer of cellulose chains. At a higher concentration (0.15 wt %), SAXS analysis indicated that these nanostrips aggregated into a layered structure. The X-ray diffraction of samples collected at different preparation stages suggested that microfibrils were delaminated along the (110) planes from the Iβ cellulose crystals. Moreover, the degree of oxidation and solid-state 13C NMR characterizations indicated that, in addition to the surface molecules, some inner molecules of microfibrils were also oxidized, facilitating the delamination into cellulose nanostrips.

  14. HPMC reinforced with different cellulose nanoparticles

    Science.gov (United States)

    Synthetic polymers, made almost entirely from chemicals derived from crude oil, are widely used as primary packaging in the food industry causing environmental issues. Hydroxypropyl Methyl Cellulose (HPMC) can be used as bio-based packaging material. In this study, the application of nanotechnology ...

  15. [Insights into engineering of cellulosic ethanol].

    Science.gov (United States)

    Yue, Guojun; Wu, Guoqing; Lin, Xin

    2014-06-01

    For energy security, air pollution concerns, coupled with the desire to sustain the agricultural sector and revitalize the rural economy, many countries have applied ethanol as oxygenate or fuel to supplement or replace gasoline in transportation sector. Because of abundant feedstock resources and effective reduction of green-house-gas emissions, the cellulosic ethanol has attracted great attention. With a couple of pioneers beginning to produce this biofuel from biomass in commercial quantities around the world, it is necessary to solve engineering problems and complete the economic assessment in 2015-2016, gradually enter the commercialization stage. To avoid "competing for food with humans and competing for land with food", the 1st generation fuel ethanol will gradually transit to the 2nd generation cellulosic ethanol. Based on the overview of cellulosic ethanol industrialization from domestic and abroad in recent years, the main engineering application problems encountered in pretreatment, enzymes and enzymatic hydrolysis, pentose/hexose co-fermentation strains and processes, equipment were discussed from chemical engineering and biotechnology perspective. The development direction of cellulosic ethanol technology in China was addressed. PMID:25212000

  16. Nanomanufacturing metrology for cellulosic nanomaterials: an update

    Science.gov (United States)

    Postek, Michael T.

    2014-08-01

    The development of the metrology and standards for advanced manufacturing of cellulosic nanomaterials (or basically, wood-based nanotechnology) is imperative to the success of this rising economic sector. Wood-based nanotechnology is a revolutionary technology that will create new jobs and strengthen America's forest-based economy through industrial development and expansion. It allows this, previously perceived, low-tech industry to leap-frog directly into high-tech products and processes and thus improves its current economic slump. Recent global investments in nanotechnology programs have led to a deeper appreciation of the high performance nature of cellulose nanomaterials. Cellulose, manufactured to the smallest possible-size ( 2 nm x 100 nm), is a high-value material that enables products to be lighter and stronger; have less embodied energy; utilize no catalysts in the manufacturing, are biologically compatible and, come from a readily renewable resource. In addition to the potential for a dramatic impact on the national economy - estimated to be as much as $250 billion worldwide by 2020 - cellulose-based nanotechnology creates a pathway for expanded and new markets utilizing these renewable materials. The installed capacity associated with the US pulp and paper industry represents an opportunity, with investment, to rapidly move to large scale production of nano-based materials. However, effective imaging, characterization and fundamental measurement science for process control and characterization are lacking at the present time. This talk will discuss some of these needed measurements and potential solutions.

  17. African perspective on cellulosic ethanol production

    DEFF Research Database (Denmark)

    Bensah, Edem Cudjoe; Kemausuor, Francis; Miezah, Kodwo;

    2015-01-01

    A major challenge to commercial production of cellulosic ethanol pertains to the cost-effective breakdown of the complex and recalcitrant structure of lignocellulose into its components via pretreatment, the cost of enzymes for hydrolysis and fermentation, and the conversion rate of C5 sugars to ...

  18. PRODUCTION AND CHARACTERIZATION OF ECONOMICAL BACTERIAL CELLULOSE

    Directory of Open Access Journals (Sweden)

    Houssni El-Saied

    2008-11-01

    Full Text Available The present study investigates the economical production of bacterial cellulose (BC by Gluconacetobacter subsp. Xylinus (ATCC 10245 in 250 ml Erlenmeyer flasks cultivated under static conditions. The fermentation media used contained food industrial by-product liquors, such as black strap molasses solution and corn steep liquor (CSL, which represents some of the most economical carbon and nitrogen sources. However, because of the presence of undesirable components in molasses (such as coloring substances, heavy metals, and other compounds that may act as inhibitors, and in order to eliminate them, crude molasses has been treated with an acid, as an attempt to increase BC productivity. The amount of BC produced using these carbon and nitrogen sources was determined and compared to that produced using previously reported fermentation media. The characterizations of the bacterial cellulose (BC pellicles obtained using either conventional or by-product media were studied by thermal and spectral techniques and compared to those of plant-derived cellulose such as cotton linter, viscose pulp, and microcrystalline cellulose.

  19. Essays concerning the cellulosic biofuel industry

    Science.gov (United States)

    Rosburg, Alicia Sue

    Despite market-based incentives and mandated production, the U.S. cellulosic biofuel industry has been slow to develop. This dissertation explores the economic factors that have limited industry development along with important economic tradeoffs that will be encountered with commercial-scale production. The first essay provides an overview of the policies, potential, and challenges of the biofuel industry, with a focus on cellulosic biofuel. The second essay considers the economics of cellulosic biofuel production. Breakeven models of the local feedstock supply system and biofuel refining process are constructed to develop the Biofuel Breakeven (BioBreak) program, a stochastic, Excel-based program that evaluates the feasibility of local biofuel and biomass markets under various policy and market scenarios. An application of the BioBreak program is presented using expected market conditions for 14 local cellulosic biofuel markets that vary by feedstock and location. The economic costs of biofuel production identified from the BioBreak application are higher than frequently anticipated and raise questions about the potential of cellulosic ethanol as a sustainable and economical substitute for conventional fuels. Program results also are extended using life-cycle analysis to evaluate the cost of reducing GHG emissions by substituting cellulosic ethanol for conventional fuel. The third essay takes a closer look at the economic trade-offs within the biorefinery industry and feedstock production processes. A long-run biomass production through bioenergy conversion cost model is developed that incorporates heterogeneity of biomass suppliers within and between local markets. The model builds on previous literature by treating biomass as a non-commoditized feedstock and relaxes the common assumption of fixed biomass density and price within local markets. An empirical application is provided for switchgrass-based ethanol production within U.S. crop reporting districts

  20. Method of forming an electrically conductive cellulose composite

    Science.gov (United States)

    Evans, Barbara R.; O'Neill, Hugh M.; Woodward, Jonathan

    2011-11-22

    An electrically conductive cellulose composite includes a cellulose matrix and an electrically conductive carbonaceous material incorporated into the cellulose matrix. The electrical conductivity of the cellulose composite is at least 10 .mu.S/cm at 25.degree. C. The composite can be made by incorporating the electrically conductive carbonaceous material into a culture medium with a cellulose-producing organism, such as Gluconoacetobacter hansenii. The composites can be used to form electrodes, such as for use in membrane electrode assemblies for fuel cells.

  1. Rheology Behavior of Cellulose/NMMO/Water Solution

    Institute of Scientific and Technical Information of China (English)

    顾广新; 胡赛珠; 邵惠丽; 沈弋弋; 胡学超

    2001-01-01

    Rheology properties of cellulose/NMMO/water solution are important parameters for spinning. The storage and loss modulus and viscosity of the solution decrease with increasing water concentration of solvent in certain range. Flow-activation energy of two kinds of cellulose solution is quite different in view of their molecular weight. The molecular weigh distribution of cellulose samples can be characterized by the value of Gc/c Since the different cellulose samples have different MWD and DP, the relations of the first normal stress difference N1 vs. shear rate are different. Moreover, the rheology properties of cellulose solution produced by twin-screw extruder process are also investigated.

  2. Cellulose-Microtubule Uncoupling Proteins Prevent Lateral Displacement of Microtubules during Cellulose Synthesis in Arabidopsis.

    Science.gov (United States)

    Liu, Zengyu; Schneider, Rene; Kesten, Christopher; Zhang, Yi; Somssich, Marc; Zhang, Youjun; Fernie, Alisdair R; Persson, Staffan

    2016-08-01

    Cellulose is the most abundant biopolymer on Earth and is the major contributor to plant morphogenesis. Cellulose is synthesized by plasma membrane-localized cellulose synthase complexes (CSCs). Nascent cellulose microfibrils become entangled in the cell wall, and further catalysis therefore drives the CSC forward through the membrane: a process guided by cortical microtubules via the protein CSI1/POM2. Still, it is unclear how the microtubules can withstand the forces generated by the motile CSCs to effectively direct CSC movement. Here, we identified a family of microtubule-associated proteins, the cellulose synthase-microtubule uncouplings (CMUs), that located as static puncta along cortical microtubules. Functional disruption of the CMUs caused lateral microtubule displacement and compromised microtubule-based guidance of CSC movement. CSCs that traversed the microtubules interacted with the microtubules via CSI1/POM2, which prompted the lateral microtubule displacement. Hence, we have revealed how microtubules can withstand the propulsion of the CSCs during cellulose biosynthesis and thus sustain anisotropic plant cell growth. PMID:27477947

  3. The Synthesis of a Novel Cellulose Physical Gel

    Directory of Open Access Journals (Sweden)

    Jiufang Duan

    2014-01-01

    Full Text Available Cellulose possessing β-cyclodextrin (β-CD was used as a host molecule and cellulose possessing ferrocene (Fc as a guest polymer. Infrared spectra, differential scanning calorimetry (DSC, ultraviolet spectroscopy (UV, and contact angle analysis were used to characterise the material structure and the inclusion behaviour. The results showed that the β-CD-cellulose and the Fc-cellulose can form inclusion complexes. Moreover, ferrocene oxidation, and reduction of state can be adjusted by sodium hypochlorite (NaClO as an oxidant and glutathione (GSH as a reductant. In this study, a physical gel based on β-CD-cellulose/Fc-cellulose was formed under mild conditions in which autonomous healing between cut surfaces occurred after 24 hours. The physical gel can be controlled in the sol-gel transition. The compressive strength of the Fc-cellulose/β-CD-cellulose gel increased with increased cellulose concentration. The host-guest interaction between the side chains of cellulose could strengthen the gel. The cellulose physical gel may eventually be used as a stimulus-responsive, healing material in biomedical applications.

  4. Tandem transformation of glycerol to esters.

    Science.gov (United States)

    Sotenko, Maria V; Rebroš, Martin; Sans, Victor S; Loponov, Konstantin N; Davidson, Matthew G; Stephens, Gill; Lapkin, Alexei A

    2012-12-31

    Tandem transformation of glycerol via microbial fermentation and enzymatic esterification is presented. The reaction can be performed with purified waste glycerol from biodiesel production in a continuous mode, combining continuous fermentation with membrane-supported enzymatic esterification. Continuous anaerobic fermentation was optimized resulting in the productivity of 2.4 g L⁻¹ h⁻¹ of 1,3-propanediol. Biphasic esterification of 1,3-propanediol was optimized to achieve ester yield of up to 75%. A hollow fibre membrane contactor with immobilized Rhizomucor miehei lipase was demonstrated for the continuous tandem fermentation-esterification process. PMID:22796408

  5. Assessing nano cellulose developments using science and technology indicators

    Energy Technology Data Exchange (ETDEWEB)

    Milanez, Douglas Henrique; Amaral, Roniberto Morato do; Faria, Leandro Innocentini Lopes de; Gregolin, Jose Angelo Rodrigues, E-mail: douglasmilanez@yahoo.com.br [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Nucleo de Informacao Tecnologica em Materiais. Dept. de Engenharia de Materiais

    2013-11-01

    This research aims to examine scientific and technological trends of developments in nano cellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nano cellulose activity indicators were compared to nanotechnology and other selected nano materials. Scientific and technological future developments in nano cellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nano cellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nano cellulose development and the extrapolation growth curves suggested that nano cellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nano cellulose S and T advances in the coming years. (author)

  6. Assessing nano cellulose developments using science and technology indicators

    International Nuclear Information System (INIS)

    This research aims to examine scientific and technological trends of developments in nano cellulose based on scientometric and patent indicators obtained from the Science Citation Index and Derwent Innovations Index in 2001-2010. The overall nano cellulose activity indicators were compared to nanotechnology and other selected nano materials. Scientific and technological future developments in nano cellulose were forecasted using extrapolation growth curves and the main countries were also mapped. The results showed that nano cellulose publications and patent documents have increased rapidly over the last five years with an average growth rate higher than that of nanotechnology and fullerene. The USA, Japan, France, Sweden and Finland all played a significant role in nano cellulose development and the extrapolation growth curves suggested that nano cellulose scientific and technological activities are still emerging. Finally, the evidence from this study recommends monitoring nano cellulose S and T advances in the coming years. (author)

  7. The effect of deuteration on the structure of bacterial cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Bali, Garima [Georgia Institute of Technology; Foston, Marcus [Georgia Institute of Technology; O' Neill, Hugh Michael [ORNL; Evans, Barbara R [ORNL; He, Junhong [ORNL; Ragauskas, Arthur [Georgia Institute of Technology

    2013-01-01

    ABSTRACT In vivo generated deuterated bacterial cellulose, cultivated from 100% deuterated glycerol in D2O medium, was analyzed for deuterium incorporation by ionic liquid dissolution and 2H and 1H nuclear magnetic resonance (NMR). A solution NMR method of the dissolved cellulose was used to determine that this bacterial cellulose had 85 % deuterium incorporation. Acetylation and 1H and 2H NMR of deuterated bacterial cellulose indicated near equal deuteration at all sites of the glucopyranosyl ring except C-6 which was partly deuterated. Despite the high level of deuterium incorporation there were no significant differences in the molecular and morphological properties were observed for the deuterated and protio bacterial cellulose samples. The highly deuterated bacterial cellulose presented here can be used as a model substrate for studying cellulose biopolymer properties via future small angle neutron scattering (SANS) studies.

  8. Method and apparatus for treating a cellulosic feedstock

    Science.gov (United States)

    Nguyen, Quang A.; Burke, Murray J.; Hillier, Sunalie N.

    2015-09-08

    Methods and apparatus for treating, pre-treating, preparing and conveying a cellulosic feedstock, such as for ethanol production, are disclosed. More specifically, the invention relates to methods and apparatus for treating a cellulosic feedstock by mixing and heating the cellulosic feedstock and/or by moistening and heating the cellulosic feedstock. The invention also relates to a holding tank, and a method of utilizing the holding tank whereby bridging may be reduced or eliminated and may result in a product stream from autohydrolysis or hydrolysis having an improved yield. The invention further relates to methods and apparatus for obtaining and conveying a cellulosic feedstock, which may be used for the subsequent production of a fermentable sugar stream from the cellulose and hemicellulose in the cellulosic feedstock wherein the fermentable sugar stream may be used for subsequent ethanol production. The invention also relates to a method and apparatus for withdrawing one or more feedstock stream from a holding tank.

  9. Characterization of cellulose extracted from oil palm empty fruit bunch

    Science.gov (United States)

    Sisak, Muhammad Asri Abdul; Daik, Rusli; Ramli, Suria

    2015-09-01

    Recently, cellulose has been studied by many researchers due to its promising properties such as biodegradability, biocompatibility, hydrophilicity and robustness. Due to that it is applied in many fields such as paper, film, drug delivery, membranes, etc. Cellulose can be extracted from various plants while oil palm empty fruit bunch (OPEFB) is the one of its sources. In this study, cellulose was extracted by chemical treatments which involved the use of formic acid and hydrogen peroxide to remove hemicellulose and lignin components. Maximum yield was 43.22%. Based on the FT-IR spectra, the peak of wax (1735 cm-1), hemicellulose (1375 cm-1) and lignin (1248 cm-1 and 1037 cm-1) were not observed in extracted cellulose. TGA analysis showed that the extracted cellulose starts to thermally degrade at 340 °C. The SEM analysis suggested that the cellulose extracted from OPEFB was not much different from commercial cellulose.

  10. Mechanism of cellobiose inhibition in cellulose hydrolysis by cellobiohydrolase

    Institute of Scientific and Technical Information of China (English)

    ZHAO; Yue; WU; Bin; YAN; Baixu; GAO; Peiji

    2004-01-01

    An experimental study of cellobiose inhibition in cellulose hydrolysis by synergism of cellobiohydrolyse I and endoglucanase I is presented. Cellobiose is the structural unit of cellulose molecules and also the main product in enzymatic hydrolysis of cellulose. It has been identified that cellobiose can strongly inhibit hydrolysis reaction of cellulase, whereas it has no effect on the adsorption of cellulase on cellulose surface. The experimental data of FT-IR spectra, fluorescence spectrum and circular dichroism suggested that cellobiose can be combined with tryptophan residue located near the active site of cellobiohydrolase and then form steric hindrance, which prevents cellulose molecule chains from diffusing into active site of cellulase. In addition, the molecular conformation of cellobiohydrolase changes after cellobiose binding, which also causes most of the non-productive adsorption. Under these conditions, microfibrils cannot be separated from cellulose chains, thus further hydrolysis of cellulose can hardly proceed.

  11. Characterization of cellulose and other exopolysaccharides produced from Gluconacetobacter strains.

    Science.gov (United States)

    Fang, Lin; Catchmark, Jeffrey M

    2015-01-22

    This study characterized the cellulosic and non-cellulosic exopolysaccharides (EPS) produced by four Gluconacetobacter strains. The yields of bacterial cellulose and water-soluble polysaccharides were dependent on both carbon source and Gluconacetobacter strain. The carbon substrate also affected the composition of the free EPS. When galactose served as an exclusive carbon source, Gluconacetobacter xylinus (G. xylinus) ATCC 53524 and ATCC 700178 produced a distinct alkaline stable crystalline product, which influenced the crystallization of cellulose. Gluconacetobacter hansenii (G. hansenii) ATCC 23769 and ATCC 53582, however, did not exhibit any significant change in cellulose crystal properties when galactose was used as the carbon source. Microscopic observation further confirmed significant incorporation of EPS into the cellulose composites. The cellulosic network produced from galactose medium showed distinctive morphological and structural features compared to that from glucose medium. PMID:25439946

  12. Stereoselective Formation of Trisubstituted Vinyl Boronate Esters by the Acid-Mediated Elimination of α-Hydroxyboronate Esters

    OpenAIRE

    Guan, Weiye; Michael, Alicia K.; McIntosh, Melissa L.; Koren-Selfridge, Liza; Scott, John P.; Clark, Timothy B.

    2014-01-01

    The copper-catalyzed diboration of ketones followed by an acid-catalyzed elimination leads to the formation of 1,1-disubstituted and trisubstituted vinyl boronate esters with moderate to good yields and selectivity. Addition of tosic acid to the crude diboration products provides the corresponding vinyl boronate esters upon elimination. The trisubstituted vinyl boronate esters are formed as the (Z)-olefin isomer, which was established by subjecting the products to a Suzuki–Miyaura coupling re...

  13. Cholesteryl ester transfer activity. Localization and role in distribution of cholesteryl ester among lipoproteins in man.

    Science.gov (United States)

    Groener, J E; Van Rozen, A J; Erkelens, D W

    1984-03-01

    The cholesteryl ester exchange/transfer protein is involved in the transport of cholesteryl ester from high density lipoproteins (HDL) to very low density lipoproteins (VLDL) and low density lipoproteins (LDL). Localization of cholesteryl ester transfer activity (CETA) in plasma was studied by measuring CETA in various delipidated fractions from a single step density ultracentrifugation gradient of plasma. CETA was measured in an in vitro system by calculating the exchange of cholesteryl ester in a standard mixture of [3H]CE-HDL and LDL. The method used for the delipidation of plasmas and fractions to be tested was critical. Optimal results were obtained by delipidation with diisopropylether-butanol (60: 40, v/v) at O degrees C. The bulk of CETA was detected in HDL3 (1.125 less than d less than 1.210 g/ml) when the lipoproteins were separated by single-step density gradient ultracentrifugation and in the 'lipoprotein-free' fraction (d greater than 1.250 g/ml) when the lipoproteins were separated by flotation ultracentrifugation including two washes. To determine whether CETA plays a role in the distribution of cholesteryl ester among the various lipoproteins, it was measured in whole plasma from normal and hyperlipidemic subjects. Plasma was delipidated before the assay in order to prevent bias due to variation of cholesterol content. CETA was higher in delipidated plasma of hyperlipidemic subjects (117.3 +/- 36.5 nmol CE/ml/h) than in delipidated plasma of normolipidemic controls (68.7 +/- 17.6 nmol CE/ml/h) (P less than 0.005). A positive correlation (r = 0.80, P less than 0.005) was found between CETA and (VLDL + LDL) cholesterol levels. A negative correlation (r = 0.57, P less than 0.05) existed between CETA and HDL cholesterol. This correlation was found both in the group as a whole and within the normal and the hyperlipidemic groups separately. The activity of the cholesteryl ester transfer appears to be a regulatory factor in the distribution of cholesteryl

  14. Outer Membrane Proteins of Fibrobacter succinogenes with Potential Roles in Adhesion to Cellulose and in Cellulose Digestion▿

    OpenAIRE

    Jun, Hyun-Sik; Qi, Meng; Gong, Joshua; Egbosimba, Emmanuel E.; Forsberg, Cecil W.

    2007-01-01

    Comparative analysis of binding of intact glucose-grown Fibrobacter succinogenes strain S85 cells and adhesion-defective mutants AD1 and AD4 to crystalline and acid-swollen (amorphous) cellulose showed that strain S85 bound efficiently to both forms of cellulose while mutant Ad1 bound to acid-swollen cellulose, but not to crystalline cellulose, and mutant Ad4 did not bind to either. One- and two-dimensional electrophoresis (2-DE) of outer membrane cellulose binding proteins and of outer membr...

  15. IMPACTS OF BIOFILM FORMATION ON CELLULOSE FERMENTATION

    Energy Technology Data Exchange (ETDEWEB)

    Leschine, Susan

    2009-10-31

    This project addressed four major areas of investigation: i) characterization of formation of Cellulomonas uda biofilms on cellulose; ii) characterization of Clostridium phytofermentans biofilm development; colonization of cellulose and its regulation; iii) characterization of Thermobifida fusca biofilm development; colonization of cellulose and its regulation; and iii) description of the architecture of mature C. uda, C. phytofermentans, and T. fusca biofilms. This research is aimed at advancing understanding of biofilm formation and other complex processes involved in the degradation of the abundant cellulosic biomass, and the biology of the microbes involved. Information obtained from these studies is invaluable in the development of practical applications, such as the single-step bioconversion of cellulose-containing residues to fuels and other bioproducts. Our results have clearly shown that cellulose-decomposing microbes rapidly colonize cellulose and form complex structures typical of biofilms. Furthermore, our observations suggest that, as cells multiply on nutritive surfaces during biofilms formation, dramatic cell morphological changes occur. We speculated that morphological changes, which involve a transition from rod-shaped cells to more rounded forms, might be more apparent in a filamentous microbe. In order to test this hypothesis, we included in our research a study of biofilm formation by T. fusca, a thermophilic cellulolytic actinomycete commonly found in compost. The cellulase system of T. fusca has been extensively detailed through the work of David Wilson and colleagues at Cornell, and also, genome sequence of a T. fusca strain has been determine by the DOE Joint Genome Institute. Thus, T. fusca is an excellent subject for studies of biofilm development and its potential impacts on cellulose degradation. We also completed a study of the chitinase system of C. uda. This work provided essential background information for understanding how C. uda

  16. Purification and characterization of a cellulose-binding {beta}-glucosidase from cellulose-degrading cultures of phanerochaete chrysosporium

    Energy Technology Data Exchange (ETDEWEB)

    Lymar, E.S.; Li, B.; Renganathan, V. [Oregon Graduate Institute of Science & Technology, Portland, OR (United States)

    1995-08-01

    Extracellular {beta}-glucosidase from cellulose-degrading cultures of Phanerochaete chrysosporium was purified by DEAE-Sephadex chromatography, by Sephacryl S-200 chromatography, and by fast protein liquid chromatography (FPLC) using a Mono Q anion-exchange column. Sodium dodecyl sulfate-polyacrylamide gel electrophoretic (SDS-PAGE) analysis of FPLC-purified {beta}-glucosidase indicated the presence of three enzyme forms with molecular weights of 96,000, 98,000, and 114,000. On further fractionation with a microcrystalline cellulose column, the 114,000-molecular-weight {beta}-glucosidase, which had 82% of the {beta}-glucosidase activity, was bound to cellulose. The {beta}-glucosidases with molecular weights of 96,000 and 98,000 did not bind to cellulose. The cellulose-bound {beta}-glucosidase was eluted completely from the cellulose matrix with water. Cellulose-bound {beta}-glucosidase catalyzed p-nitrophenylglucoside hydrolysis, suggesting that the catalytic site is not involved in cellulose binding. When the cellulose-binding form was incubated with papain for 20 h, no decrease in the enzyme activity was observed; however, approximately 74% of the papain-treated glucosidase did not bind to microcrystalline cellulose. SDS-PAGE analysis of the nonbinding glucosidase produced by papain indicated the presence of three bands with molecular weights in the range of 95,000 to 97,000. On the basis of these results, we propose that the low-molecular-weight (96,000 and 98,000) non-cellulose-binding {beta}-glucosidase forms are most probably formed from the higher-molecular-weight (114,000) cellulose-binding {beta}-glucosidase via extracellular proteolytic hydrolysis. Also, it appears that the extracellular {beta}-glucosidase from P. chrysosporium might be organized into two domains, a cellulose-binding domain and a catalytic domain. Kinetic characterization of the cellulose-binding form is also presented. 31 refs., 6 figs., 1 tab.

  17. Physical and monolayer film properties of potential fatty ester biolubricants

    Energy Technology Data Exchange (ETDEWEB)

    Yao, Linxing [Iowa State University; Hammond, Earl G [Iowa State University; Wang, Tong [Iowa State University; Bu, Wei [Ames Laboratory; Vaknin, David [Ames Laboratory

    2014-04-03

    The desire to replace petroleum-based lubricants with alternatives that are environmentally friendly and made from sustainable sources has encouraged the development of biolubricants based on vegetable oils. To be good lubricants, the materials should have low melting points, appropriate viscosity and oxidative stability. In this paper, we report the melting point and viscosity of oleate esters of ethylene glycol, 1,2-propanediol, 2,3-butanediol, and pentaerythritol as well as the decanoate esters of 2,3-butanediol and the 12-methyltetradecanoate esters of 1,2-propanediol. Polyol esters that have a free hydroxy group had lower melting points than the completely esterified polyols, but the completely esterified polyol esters exhibited less change in viscosity with temperature than those having a free hydroxy group. 2, 3-Butanediol monooleate, which melted at -48.6°C shows promise as a biolubricant, but its viscosity index was estimated to be 100. Pentaerythritol oleate esters, with melting points below -10°C and viscosity indices in the range of 170–197, may be suitable candidates as biolubricants. The behavior of esters spread as a monomolecular film at air/water interface may provide insight into the way they behave when spread on metal or polar surfaces, so the pressure-area isotherms of 2,3-butanediol monoleate and selected esters are also reported.

  18. 40 CFR 721.2950 - Carboxylic acid glycidyl esters.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Carboxylic acid glycidyl esters. 721... Substances § 721.2950 Carboxylic acid glycidyl esters. (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as carboxylic acid glycidyl...

  19. Analysis of Adipate Ester Contents in PVC Plastics

    DEFF Research Database (Denmark)

    Berg, Rolf W.

    2006-01-01

    Plasticizers are needed in flexible PVC (PolyVinylChloride) products. There is serious concern that commonly used phthalate esters may harm life reproduction systems. To avoid the problems, instead adipate di-esters (AEs) of C8 to C10 alcohols are used as higher prized alternatives; e.g. di-2...

  20. The Preparation and Enzymatic Hydrolysis of a Library of Esters

    Science.gov (United States)

    Sanford, Elizabeth M.; Smith, Traci L.

    2008-01-01

    An investigative case study involving the preparation of a library of esters using Fischer esterification and alcoholysis of acid chlorides and their subsequent enzymatic hydrolysis by pig liver esterase and orange peel esterase is described. Students work collaboratively to prepare and characterize the library of esters and complete and evaluate…

  1. A facile route to prepare cellulose-based films.

    Science.gov (United States)

    Xu, Qin; Chen, Chen; Rosswurm, Katelyn; Yao, Tianming; Janaswamy, Srinivas

    2016-09-20

    Cellulose is the most abundant renewable and biodegradable material available in nature. Its insoluble character in water as well as common organic and inorganic liquids, however, curtails the wholesome utility. The continuous rise for biodegradable products based on cellulose coupled with its intrinsic ability to form a viable substitute for the petroleum-based materials necessitates the critical need for solubilizing the cellulose. Herein, we demonstrate the feasibility of ZnCl2 solutions, especially the 64-72% concentrations, to dissolve cellulose. FTIR results suggest that Zn(2+) ions promote Zn⋯O3H interactions, which in-turn weaken the intrinsic O3H⋯O5 hydrogen bonds that are responsible for strengthening the cellulose chains. Interestingly, Ca(2+) ions promote interactions among the Zn-cellulose chains leading to the formation of nano fibrils and yield gelling solutions. The tensile strength of the Ca(2+) added Zn-cellulose films increases by around 250% compared to the Zn-cellulose films. Overall, utilization of inorganic salt solutions to solubilize and crosslink cellulose is cost-effective, recyclable and certainly stands out tall among the other available systems. More importantly, the proposed protocol is simple and is a "green" process, and thus its large-scale adaptability is quite feasible. We strongly believe that the outcome opens up a new window of opportunities for cellulose in the biomedical, pharmaceutical, food and non-food applications. PMID:27261751

  2. Tertiary phase diagram of cellulose, ionic liquid and organic solvent

    Science.gov (United States)

    Zhang, Xin; Henderson, Doug; Tyagi, Madhusudan; Mao, Yimin; Briber, Robert M.; Wang, Howard

    Cellulose is the most abundant natural polymer on earth, and widely used in products from clothing to paper. Fundamental understanding of molecular solutions of cellulose is the key to realize advanced technologies beyond cellulose fibers. It has been reported that certain ionic liquid/organic solvent mixtures dissolve cellulose. In this study, the tertiary phase diagram of microcrystalline cellulose, 1-Ethyl-3-methylimidazolium acetate (EMIMAc), and dimethylformamide (DMF) mixtures has been determined using optical cloud point method and small angle neutron scattering (SANS). Data indicate that a molar ratio of EMIMAc to cellulose repeating unit equal or greater than 3 is necessary but not sufficient in forming one-phase homogeneous solutions. A miscibility gap exists in the dilute regime, where a minimum of 5 mol% of EMIM Ac in DMF is needed to form homogenous solutions. SANS show that cellulose chains adopt Gaussian-like conformation in homogenous solutions. The solutions exhibit the characteristics of upper critical solution temperature. Clustering of cellulose chains occurs at low EMIMAc/DMF or EMIMAc/cellulose ratio, or at low temperatures. The mechanism of cellulose dissolution in tertiary mixture is discussed.

  3. Extensional viscosity of microfibrillated cellulose suspensions.

    Science.gov (United States)

    Moberg, Tobias; Rigdahl, Mikael; Stading, Mats; Levenstam Bragd, Emma

    2014-02-15

    The extensional properties of micro fibrillated cellulose (MFC)-suspensions at different fibril concentrations and with different amounts of added sodium chloride were evaluated. The MFC-suspensions were obtained by diluting a stock solution consisting of 0.95 wt.% cellulose with either deionized water or sodium chloride solution, giving a series of different concentrations and sodium chloride contents. The extensional viscosities of the suspensions were measured utilizing contraction flow geometry. Here the specimens were forced through a hyperbolic nozzle and the required pressure drop over the nozzle was measured. The extensional viscosity exhibited an extensional-thinning behaviour over the extensional strain rates used. Furthermore the extensional viscosity decreased with decreasing concentration of the suspensions, in similarities with the shear properties of the specimens. For the suspensions containing sodium chloride, the extensional viscosity appeared to increase when the concentration of sodium chloride was increased. But excessive amounts of added sodium chloride promoted an agglomeration of the suspensions. PMID:24507298

  4. Reinforced plastics and aerogels by nanocrystalline cellulose

    International Nuclear Information System (INIS)

    Nanocrystalline cellulose (NCC), a rigid rod-like nanoscale material, can be produced from cellulosic biomass in powder, liquid, or gel forms by acid and chemical hydrolysis. Owing to its unique and exceptional physicochemical properties, the incorporation of a small amount of NCC into plastic enhances the mechanical strength of the latter by several orders of magnitudes. Carbohydrate-based NCC poses no serious environmental concerns, providing further impetus for the development and applications of this green and renewable biomaterial to fabricate lightweight and biodegradable composites and aerogels. Surface functionalization of NCC remains the main focus of NCC research to tailor its properties for dispersion in hydrophilic or hydrophobic media. It is of uttermost importance to develop tools and protocols for imaging of NCC in a complex matrix and quantify its reinforcement effect.

  5. Process Dependence of Cellulose Nanofiber Fabrication

    Science.gov (United States)

    Henderson, Doug; Zhang, Xin; Mao, Yimin; Jang, Soo-Hwan; Hu, Liangbing; Briber, Robert; Wang, Howard

    Cellulose nanofibers (CNF) are the most abundant natural nanomaterial on earth with potential applications in renewable energy, polymer nanocomposites and flexible electronics. CNF can be produced through TEMPO oxidation which separates the hierarchical structure of cellulose fibers into smaller micro- and nanofibers by altering their surface chemistry, inducing a repulsive electrostatic charge on the fibers. This work will examine the structural evolution of CNF during production. Samples were prepared by removing and quenching aliquots during the TEMPO reaction. The fibers were washed, filtered and re-dispersed into D2O for small angle neutron scattering (SANS) measurements. The SANS data was analyzed to track the changes in the CNF structure as a function of reaction time.

  6. Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential

    Energy Technology Data Exchange (ETDEWEB)

    Turbak, A.F.; Snyder, F.W.; Sandberg, K.R.

    1983-01-01

    A new form of cellulose, which is expanded to a smooth gel when dispersed in polar liquids, is produced by a unique, rapid, physical treatment of wood cellulose pulps. A 2% suspension of microfibrillated cellulose (MFC) in water has thixotropic viscosity properties and is a stable gel on storage, or when subjected to freeze-thaw cycles. At this concentration, MFC is an excellent suspending medium for other solids and an emulsifying base for organic liquids. In laboratory tests, microfibrillated cellulose has been demonstrated to have wide utility in the preparation of foods such as low-calorie whipped toppings, cake frostings, salad dressings, gravies, and sauces. At 0.3% cellulose concentration in ground meats, MFC helps retain juices during cooking. Tests were also conducted in formulating paints, emulsions, and cosmetics and in the use of MFC as a binder for nonwoven textiles and as a mineral suspending agent. From economic studies, it is estimated that a 2% MFC dispersion can be produced for about 1.5 cents/lb, total cost. 6 references, 9 figures, 2 tables.

  7. SPECIFIC INTERACTION ACTING AT A CELLULOSE-BINDING DOMAIN/CELLULOSE INTERFACE FOR PAPERMAKING APPLICATION

    Directory of Open Access Journals (Sweden)

    Shingo Yokota

    2008-11-01

    Full Text Available Specific and strong cellulose-binding characteristics were utilized for promoting retention of additives in contaminated papermaking systems. Cellulose-binding domain (CBD of cellulase derived from Trichoderma viride was separated by digestion with papain, and then introduced into anionic polyacrylamide (A-PAM through a condensation reaction using water-soluble carbodiimide. The CBD-modified A-PAM (CBD-A-PAM showed good retention on pulp fibers, resulting in high tensile strength paper sheets. The effect remained almost unchanged in the presence of model interfering substances such as ligninsulfonate and Ca2+ ions, whereas commercial cationic paper-strengthening polymer became ineffective. The cellulose-binding force of CBD was quantitatively determined by atomic force microscopy (AFM in the liquid state. Histidine-tagged CBD protein was obtained using Escherichia coli via an expression of CBD derived from Cellulomonas fimi, and immobilized on a gold-coated AFM probe. A strong attractive force was detected only at a CBD/cellulose interface, even when Ca2+ ions were present in high concentration. Direct estimation of CBD affinity for cellulose substrate by AFM would provide significant information on the interfacial interactions useful for the functional design of papermaking additives.

  8. Methods of refining and producing dibasic esters and acids from natural oil feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Snead, Thomas E.; Cohen, Steven A.; Gildon, Demond L.

    2016-06-14

    Methods and systems for making dibasic esters and/or dibasic acids using metathesis are generally disclosed. In some embodiments, the methods comprise reacting a terminal olefin ester with an internal olefin ester in the presence of a metathesis catalyst to form a dibasic ester and/or dibasic acid. In some embodiments, the terminal olefin ester or the internal olefin ester are derived from a renewable feedstock, such as a natural oil feedstock. In some such embodiments, the natural oil feedstock, or a transesterified derivative thereof, is metathesized to make the terminal olefin ester or the internal olefin ester.

  9. End-functionalization of cellulose nanocrystals

    OpenAIRE

    Lundahl, Meri

    2014-01-01

    Regioselective modification of nanocelluloses can have intriguing applications in self-assembled material synthesis. In this thesis, cellulose nanocrystals (CNC) were selectively functionalized at their reducing ends with thiol and maleimide groups. For thiol end-functionalization, a protocol was developed based on NHS/EDC-catalyzed coupling of NaClO2-oxidized CNCs with NH2 (CH2)6 SH in water. Maleimide end-functionalization was achieved by reacting end-thiolated CNCs (CNC SH) with a homobifu...

  10. Nanofibrillated Cellulose Surface Modification: A Review

    OpenAIRE

    Julien Bras,; Mohamed Naceur Belgacem; Karim Missoum

    2013-01-01

    Interest in nanofibrillated cellulose (NFC) has increased notably over recent decades. This bio-based nanomaterial has been used essentially in bionanocomposites or in paper thanks to its high mechanical reinforcement ability or barrier property respectively. Its nano-scale dimensions and its capacity to form a strong entangled nanoporous network have encouraged the emergence of new high-value applications. It is worth noting that chemical surface modification of this material can be a key fa...

  11. Characterization of Cellulose Microfibrils Obtained from Hemp

    OpenAIRE

    Šutka, Anna; Kukle, Silvija; Gravitis, Janis; Grave, Laima

    2013-01-01

    Microfibrillated cellulose was extracted from hemp fibres using steam explosion pretreatment and high-intensity ultrasonic treatment (HIUS). The acquired results after steam explosion treatment and water and alkali treatments are discussed and interpreted by Fourier transform infrared spectroscopy (FTIR). Scanning electron microscopy (SEM) was used to examine the microstructure of hemp fibres before and after each treatment. A fibre size analyser was used to analyse the dimensions of the untr...

  12. Cellulose nanocrystals : surface modification and advanced materials

    OpenAIRE

    Lin, Ning

    2014-01-01

    The present work focuses on the properties of cellulose nanocrystals, their surface modification and development of advanced materials. Diverse approaches are employed on these nanoscaled substrates aiming to modify their surface properties and extend their use in highly sophisticated applications, such as postsulfation and desulfation, polymer grafting and adsorption, selective oxidation, molecular grafting, and ‘host-guest' inclusion. On the basis of surface modifications, properties analys...

  13. PRODUCTION AND CHARACTERIZATION OF ECONOMICAL BACTERIAL CELLULOSE

    OpenAIRE

    Houssni El-Saied; Ahmed I. El-Diwany; Altaf H. Bast; Nagwa A. Atwa; Dina E. El-Ghwas

    2008-01-01

    The present study investigates the economical production of bacterial cellulose (BC) by Gluconacetobacter subsp. Xylinus (ATCC 10245) in 250 ml Erlenmeyer flasks cultivated under static conditions. The fermentation media used contained food industrial by-product liquors, such as black strap molasses solution and corn steep liquor (CSL), which represents some of the most economical carbon and nitrogen sources. However, because of the presence of undesirable components in molasses (such as colo...

  14. Tritium concentrations in tree ring cellulose

    International Nuclear Information System (INIS)

    Measurements of tritium (tissue bound tritium; TBT) concentration in tree rings are presented and discussed. Such measurement is expected to provide a useful means of estimating the tritium level in the environment in the past. The concentration of tritium bound in the tissue (TBT) in a tree ring considered to reflect the environmental tritium level in the area at the time of the formation of the ring, while the concentration of tritium in the free water in the tissue represents the current environmental tritium level. First, tritium concentration in tree ring cellulose sampled from a cedar tree grown in a typical environment in Fukuoka Prefecture is compared with the tritium concentration in precipitation in Tokyo. Results show that the year-to-year variations in the tritium concentration in the tree rings agree well with those in precipitation. The maximum concentration, which occurred in 1963, is attibuted to atmospheric nuclear testing which was performed frequently during the 1961 - 1963 period. Measurement is also made of the tritium concentration in tree ring cellulose sampled from a pine tree grown near the Isotope Center of Kyushu University (Fukuoka). Results indicate that the background level is higher probably due to the release of tritium from the facilities around the pine tree. Thus, measurement of tritium in tree ring cellulose clearly shows the year-to-year variation in the tritium concentration in the atmosphere. (N.K.)

  15. Drying of Pigment-Cellulose Nanofibril Substrates

    Directory of Open Access Journals (Sweden)

    Oleg Timofeev

    2014-10-01

    Full Text Available A new substrate containing cellulose nanofibrils and inorganic pigment particles has been developed for printed electronics applications. The studied composite structure contains 80% fillers and is mechanically stable and flexible. Before drying, the solids content can be as low as 20% due to the high water binding capacity of the cellulose nanofibrils. We have studied several drying methods and their effects on the substrate properties. The aim is to achieve a tight, smooth surface keeping the drying efficiency simultaneously at a high level. The methods studied include: (1 drying on a hot metal surface; (2 air impingement drying; and (3 hot pressing. Somewhat surprisingly, drying rates measured for the pigment-cellulose nanofibril substrates were quite similar to those for the reference board sheets. Very high dewatering rates were observed for the hot pressing at high moisture contents. The drying method had significant effects on the final substrate properties, especially on short-range surface smoothness. The best smoothness was obtained with a combination of impingement and contact drying. The mechanical properties of the sheets were also affected by the drying method and associated temperature.

  16. Printed optically transparent graphene cellulose electrodes

    Science.gov (United States)

    Sinar, Dogan; Knopf, George K.; Nikumb, Suwas; Andrushchenko, Anatoly

    2016-02-01

    Optically transparent electrodes are a key component in variety of products including bioelectronics, touch screens, flexible displays, low emissivity windows, and photovoltaic cells. Although highly conductive indium tin oxide (ITO) films are often used in these electrode applications, the raw material is very expensive and the electrodes often fracture when mechanically stressed. An alternative low-cost material for inkjet printing transparent electrodes on glass and flexible polymer substrates is described in this paper. The water based ink is created by using a hydrophilic cellulose derivative, carboxymethyl cellulose (CMC), to help suspend the naturally hydrophobic graphene (G) sheets in a solvent composed of 70% DI water and 30% 2-butoxyethanol. The CMC chain has hydrophobic and hydrophilic functional sites which allow adsorption on G sheets and, therefore, permit the graphene to be stabilized in water by electrostatic and steric forces. Once deposited on the functionalized substrate the electrical conductivity of the printed films can be "tuned" by decomposing the cellulose stabilizer using thermal reduction. The entire electrode can be thermally reduced in an oven or portions of the electrode thermally modified using a laser annealing process. The thermal process can reduce the sheet resistance of G-CMC films to high optical transparency.

  17. 21 CFR 177.1400 - Hydroxyethyl cellulose film, water-insoluble.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Hydroxyethyl cellulose film, water-insoluble. 177... cellulose film, water-insoluble. Water-insoluble hydroxyethyl cellulose film may be safely used for... cellulose film consists of a base sheet manufactured by the ethoxylation of cellulose under...

  18. Biodegradation evaluation of bacterial cellulose, vegetable cellulose and poly (3-hydroxybutyrate in soil

    Directory of Open Access Journals (Sweden)

    Suellen Brasil Schröpfer

    2015-04-01

    Full Text Available In recent years, the inappropriate disposal of polymeric materials has increased due to industrial development and increase of population consumption. This problem may be minimized by using biodegradable polymers, such as bacterial cellulose and poly(hydroxybutyrate, from renewable resources. This work was aimed at monitoring and evaluating degradation of bacterial cellulose, vegetable cellulose and poly(3-hydroxybutyrate using Thermogravimetric Analysis and Scanning Electron Microscopy. Controlled mass polymer samples were buried in pots containing soil. Samples were removed in 30 day intervals up to 180 days. The results show that the mass of the polymer increased in the first month when in contact with the soil but then it was degraded as evidenced by mass loss and changes on the sample surface.

  19. LUFFA CYLINDRICA AS A LIGNOCELLULOSIC SOURCE OF FIBER, MICROFIBRILLATED CELLULOSE, AND CELLULOSE NANOCRYSTALS

    Directory of Open Access Journals (Sweden)

    Gilberto Siqueira

    2010-05-01

    Full Text Available In this work the annual plant called Luffa cylindrica (LC has been characterized and used to prepare macroscopic lignocellulosic fibers and cellulosic nanoparticles, viz. microfibrillated cellulose (MFC and whiskers, each of which can be used as a reinforcing phase in bionanocomposites. The morphological, chemical, and physical properties of LC fibers were first characterized. The contents of lignin, hemicellulose, and other constituents were determined, and scanning electron microscopy (SEM observations were performed to investigate the surface morphology of the LC fibers. Sugars contents were determined by ionic chromatography, and it was shown that glucose was the main sugar present in the residue. MFC and whiskers were prepared after chemical treatments (NaOH and NaClO2, purifying cellulose by eliminating lignin and hemicellulose. Transmission electron microscopy (TEM and SEM made it possible to determine the dimensions of LC whiskers and MFC. Tensile tests were carried out to investigate the mechanical properties of LF nanoparticles.

  20. Phosphorylation of Kraft fibers with phosphate esters.

    Science.gov (United States)

    Shi, Ying; Belosinschi, Dan; Brouillette, François; Belfkira, Ahmed; Chabot, Bruno

    2014-06-15

    Phosphate esters, derived from two different long-chain aliphatic alcohols, were used as phosphorylating reagents for Kraft pulp fibers. High phosphorus contents and almost non-degraded fibers were obtained by following this pathway. The phosphorylation efficiency was influenced by the alkyl chain length of PEs since the phosphorus content in modified fibers was higher for the shorter chain reagent. Due to the heterogeneous reaction environment, the amount of grafted phosphorus was found to be almost three times higher at the surface than in the bulk of the fibers. Analyses also indicated that the phosphorus was bonded to fibers as a phosphate-like structure. Furthermore, the situation seemed to be different for the fiber surface where significant amounts of phosphorus were present in more complex structures like pyrophosphate or even oligo-phosphate. PMID:24721058

  1. The plasma physics measurement unit ESTER

    International Nuclear Information System (INIS)

    The ESTER measurement station on board of the landing unit of the Phobos spacecraft has three distinct units for cosmic radiation measurements on the Martian moon Phobos. They are the LET, SLED and HARP. The Low Energy Telescope (LET) has been designed to measure solar cosmic radiation (flux, energy spectra, angular distribution and ion composition) in the interplanetary space. The Solar Low-Energy Detectors (SLED) are used to detect interplanetary flux of the low-energy cosmic rays, and the galactic background radiation. The Hyperbolic Analyzer in Retarding Potential (HARP) module is used for the studies of energy and directional distributions of very low energy ions and electrons. The DPU, a unit for control and data processing of the three plasma physics measurement units is also described. (R.P.) 3 refs.; 2 figs

  2. Electrochemistry of polyamidoamine dendrimers ester gel electrolytes

    Institute of Scientific and Technical Information of China (English)

    CHEN Hong; MO Zunli

    2004-01-01

    This paper described the first example of polyamidoamine dendrimers ester (PAMAM) used as a gel electrolyte with a short-chain polyethylene glycol (MPEG-400) as a plasticizer. The polymer films are solid and sticky. Background cyclic voltammetry (CV) shows a potential window between +0.7 and -0.7 V vs. Ag/AgCl. The voltammetry of ferrocene and 7,7,8,8-tetracyanoquinodimethane (TCNQ) indicates that diffusion coefficients are in the range of 10-a-10-9 cm2/s.Ionic conductivities are approximately 10-6 S/cm. Similar films using dimethyl sulfoxide (DMSO) as a plasticizer instead of MPEG-400 have demonstrated ionic conductivities of 10-4 S/cra and reversible voltammetry. However, UV spectrophotometry shows that 70% of the DMSO is lost under vacuum, indicating the difficulty in quantifying the DMSO content when exposed to vacuum.

  3. Spasmolytic Activity of Chiral Monoterpene Esters

    Directory of Open Access Journals (Sweden)

    Damião P. de Sousa

    2011-01-01

    Full Text Available The present study aimed to investigate the correlation between structure and spasmolytic activity of racemate and enantiomers of linalyl and citronellyl acetates, chemical constituents of several bioactive essential oils, such as Thymus leptophyllus essential oil, which contains linalyl acetate as major constituent. The monoterpene esters showed significant spasmolytic activity in guinea-pig isolated ileum. Therefore, these result confirm that linalyl acetate should be involved at spasmolytic activity of the Thymus leptophyllus essential oil. The (+-, (--, and (±-linalyl acetates exhibited a relaxant effect equipotent. (+- and (--Citronellyl acetates also showed a similar effect, however, synergistic action was presented on constituents of citronellyl acetate racemate. The study showed that the racemate and enantiomers of linalyl and citronellyl acetates are bioactives and that the position of the functional group on the molecule structures influences the effect of relaxation of the ileum.

  4. Sintesis Surfaktan Metil Ester Sulfonat dari Sulfonasi Metil Ester Asam Lemak Minyak Kastor (Ricinus communis L)

    OpenAIRE

    Aritonang, Rianti E J

    2011-01-01

    Methyl ester sulfonate (MES) surfactant is an anionic surfactant which could be synthesized from oil. Surfactant have a capability to reduce surface tension, interface tension and elevate the stability of emulsion system. The material sources to produce surfactant was derived from petroleum oil, vegetables oil and animals fats. One of vegetables oil is polar castor oil, because it contained of ricinoleic acid as the major compound which has –OH group. Castor oil could be synthesize became ...

  5. Biocomposite cellulose-alginate films: promising packaging materials.

    Science.gov (United States)

    Sirviö, Juho Antti; Kolehmainen, Aleksi; Liimatainen, Henrikki; Niinimäki, Jouko; Hormi, Osmo E O

    2014-05-15

    Biocomposite films based on cellulose and alginate were produced using unmodified birch pulp, microfibrillated cellulose (MFC), nanofibrillated cellulose (NFC) and birch pulp derivate, nanofibrillated anionic dicarboxylic acid cellulose (DCC), having widths of fibres ranging from 19.0 μm to 25 nm as cellulose fibre materials. Ionically cross-linked biocomposites were produced using Ca(2+) cross-linking. Addition of micro- and nanocelluloses as a reinforcement increased the mechanical properties of the alginate films remarkably, e.g. addition of 15% of NFC increased a tensile strength of the film from 70.02 to 97.97 MPa. After ionic cross-linking, the tensile strength of the film containing 10% of DCC was increased from 69.63 to 125.31 MPa. The biocomposite films showed excellent grease barrier properties and reduced water vapour permeability (WVP) after the addition of cellulose fibres, except when unmodified birch pulp was used. PMID:24423542

  6. Metallization of bacterial cellulose for electrical and electronic device manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Barbara R [Oak Ridge, TN; O' Neill, Hugh M [Knoxville, TN; Jansen, Valerie Malyvanh [Memphis, TN; Woodward, Jonathan [Knoxville, TN

    2010-09-28

    A method for the deposition of metals in bacterial cellulose and for the employment of the metallized bacterial cellulose in the construction of fuel cells and other electronic devices is disclosed. The method for impregnating bacterial cellulose with a metal comprises placing a bacterial cellulose matrix in a solution of a metal salt such that the metal salt is reduced to metallic form and the metal precipitates in or on the matrix. The method for the construction of a fuel cell comprises placing a hydrated bacterial cellulose support structure in a solution of a metal salt such that the metal precipitates in or on the support structure, inserting contact wires into two pieces of the metal impregnated support structure, placing the two pieces of metal impregnated support structure on opposite sides of a layer of hydrated bacterial cellulose, and dehydrating the three layer structure to create a fuel cell.

  7. Metallization of bacterial cellulose for electrical and electronic device manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Barbara R. (Oak Ridge, TN); O' Neill, Hugh M. (Knoxville, TN); Jansen, Valerie Malyvanh (Memphis, TN); Woodward, Jonathan (Knoxville, TN)

    2011-06-07

    A method for the deposition of metals in bacterial cellulose and for the employment of the metallized bacterial cellulose in the construction of fuel cells and other electronic devices is disclosed. The method for impregnating bacterial cellulose with a metal comprises placing a bacterial cellulose matrix in a solution of a metal salt such that the metal salt is reduced to metallic form and the metal precipitates in or on the matrix. The method for the construction of a fuel cell comprises placing a hydrated bacterial cellulose support structure in a solution of a metal salt such that the metal precipitates in or on the support structure, inserting contact wires into two pieces of the metal impregnated support structure, placing the two pieces of metal impregnated support structure on opposite sides of a layer of hydrated bacterial cellulose, and dehydrating the three layer structure to create a fuel cell.

  8. Extraction and characterization of cellulose nano whiskers from balsa wood

    International Nuclear Information System (INIS)

    In this study cellulose nano whiskers were obtained from balsa wood. For this purpose, fibers of balsa wood were subjected to hydrolysis reactions for lignin and hemi cellulose digestion and acquisition of nano-scale cellulose. Cellulose nano crystals obtained had medium length and thickness of 176 nm and 7 nm respectively. Infrared spectroscopy and x-ray diffraction showed that the process used for extracting nano whiskers could digest nearly all the lignin and hemi cellulose from the balsa fiber and still preserve the aspect ratio and crystallinity, satisfactory enough for future application in polymer nano composites. Thermogravimetry showed that the onset temperature of thermal degradation of cellulose nano crystals (226 degree C) was higher than the temperature of the balsa fiber (215 degree C), allowing its use in molding processes with many polymers from the molten state.(author)

  9. Cellulose-Based Bio- and Nanocomposites: A Review

    Directory of Open Access Journals (Sweden)

    Susheel Kalia

    2011-01-01

    Full Text Available Cellulose macro- and nanofibers have gained increasing attention due to the high strength and stiffness, biodegradability and renewability, and their production and application in development of composites. Application of cellulose nanofibers for the development of composites is a relatively new research area. Cellulose macro- and nanofibers can be used as reinforcement in composite materials because of enhanced mechanical, thermal, and biodegradation properties of composites. Cellulose fibers are hydrophilic in nature, so it becomes necessary to increase their surface roughness for the development of composites with enhanced properties. In the present paper, we have reviewed the surface modification of cellulose fibers by various methods. Processing methods, properties, and various applications of nanocellulose and cellulosic composites are also discussed in this paper.

  10. Effect of Surface Attachment on Synthesis of Bacterial Cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Barbara R [ORNL; O' Neill, Hugh Michael [ORNL

    2005-01-01

    Gluconacetobacter spp. synthesize a pure form of hydrophilic cellulose that has several industrial specialty applications. Literature reports have concentrated on intensive investigation of static and agitated culture in liquid media containing high nutrient concentrations optimized for maximal cellulose production rates. The behavior of these bacteria on semisolid and solid surfaces has not been specifically addressed. The species Gluconacetobacter hansenii was examined for cellulose synthesis and colony morphology on a range of solid supports, including cotton linters, and on media thickened with agar, methyl cellulose, or gellan. The concentration and chemical structure of the thickening agent were found to be directly related to the formation of contiguous cellulose pellicules. Viability of the bacteria following freezer storage was improved when the bacteria were frozen in their cellulose pellicules.

  11. Nanocellulose patents trends: a comprehensive review on patents on cellulose nanocrystals, microfibrillated and bacterial cellulose.

    Science.gov (United States)

    Charreau, Hernan; Foresti, Maria L; Vazquez, Analia

    2013-01-01

    Cellulose nanoparticles (i.e. cellulose elements having at least one dimension in the 1-100 nm range) have received increasing attention during the last decade. This is not only evident in academic articles, but it is also manifested by the increasing number of nanocellulose patents that are published every year. In the current review, nanocellulose patents are reviewed using specific software which provides valuable information on the annual number of patents that have been published throughout the years, main patent owners, most prolific inventors, and patents on the field that have received more citations. Patent statistics on rod-like cellulose nanoparticles extracted from plants by acid hydrolysis (nanocrystals), mechanical treatment leading to microfibrillated cellulose (MFC), and microbially produced nanofibrils (bacterial cellulose, BC) are analyzed in detail. The aim of the current review is to provide researchers with patent information which may help them in visualizing the evolution of nanocellulose technology, both as a whole and also divided among the different nanosized particles that are currently the subject of outstanding scientific attention. Then, patents are not only analyzed by their content, but also by global statistics which will reveal the moment at which different cellulose nanoparticles technologies achieved a breakthrough, the relative interest received by different nanocellulose particles throughout the years, the companies that have been most interested in this technology, the most prolific inventors, and the patents that have had more influence in further developments. It is expected that the results showing the explosion that nanocellulose technology is experiencing in current days will still bring more research on the topic and contribute to the expansion of nanocellulosics applications. PMID:22747719

  12. Ductile all-cellulose nanocomposite films fabricated from core-shell structured cellulose nanofibrils.

    Science.gov (United States)

    Larsson, Per A; Berglund, Lars A; Wågberg, Lars

    2014-06-01

    Cellulosic materials have many desirable properties such as high mechanical strength and low oxygen permeability and will be an important component in a sustainable biomaterial-based society, but unfortunately they often lack the ductility and formability offered by petroleum-based materials. This paper describes the fabrication and characterization of nanocomposite films made of core-shell modified cellulose nanofibrils (CNFs) surrounded by a shell of ductile dialcohol cellulose, created by heterogeneous periodate oxidation followed by borohydride reduction of the native cellulose in the external parts of the individual fibrils. The oxidation with periodate selectively produces dialdehyde cellulose, and the process does not increase the charge density of the material. Yet the modified cellulose fibers could easily be homogenized to CNFs. Prior to film fabrication, the CNF was shown by atomic force microscopy to be 0.5-2 μm long and 4-10 nm wide. The films were fabricated by filtration, and besides uniaxial tensile testing at different relative humidities, they were characterized by scanning electron microscopy and oxygen permeability. The strength-at-break at 23 °C and 50% RH was 175 MPa, and the films could, before rupture, be strained, mainly by plastic deformation, to about 15% and 37% at 50% RH and 90% RH, respectively. This moisture plasticization was further utilized to form a demonstrator consisting of a double-curved structure with a nominal strain of 24% over the curvature. At a relative humidity of 80%, the films still acted as a good oxygen barrier, having an oxygen permeability of 5.5 mL·μL/(m(2)·24 h·kPa). These properties indicate that this new material has a potential for use as a barrier in complex-shaped structures and hence ultimately reduce the need for petroleum-based plastics. PMID:24773125

  13. Characterization of Cellulose Microfibers Isolated from Rubberwood (Hevea brasiliensis)

    OpenAIRE

    Junidah Lamaming; Nurul Hasin Sharudin; Rokiah Hashim; Othman Sulaiman

    2016-01-01

    Cellulose microfibers were isolated by chemical treatment followed by acid hydrolysis using sulphuric acid. The chemical compositions for extractive, holocellulose, cellulose and lignin were determined. The functional group of raw particles and cellulose microfibers of rubberwood were determined using fourier transform infrared spectroscopy (FT-IR). Morphological studies were viewed using Scanning Electron Microscopy (SEM) to investigate physical changes of the fibers after acid hydrolysis. T...

  14. Metallization of bacterial cellulose for electrical and electronic device manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Evans, Barbara R.; O' Neill, Hugh M.; Jansen, Valerie Malyvanh; Woodward, Jonathan

    2006-01-17

    The employment of metallized bacterial cellulose in the construction of fuel cells and other electronic devices is disclosed. The fuel cell includes an electrolyte membrane comprising a membrane support structure comprising bacterial cellulose, an anode disposed on one side of the electrolyte membrane, and a cathode disposed on an opposite side of the electrolyte membrane. At least one of the anode and the cathode comprises an electrode support structure comprising bacterial cellulose, and a catalyst disposed in or on the electrode support structure.

  15. A study on paper recycling effects on cellulose properties

    OpenAIRE

    Sahin, Halil

    2013-01-01

    Cellulose is the main structural element of paper, one of the most important natural polimers that producted by plants. The water-cellulose interactions that causing swelling with water intake or shrinkage with water removal is very key issue for formation of sheet. However, during paper recycling, cellulose is undergoes some changes and swelling properties in water decreases irreversible. As a result of these modifications, plasticity and elastic properties of fibers modified. Once dried cel...

  16. EXPERIMENTAL STUDY OF MICRO-FIBRILLATED CELLULOSE REINFORCED EPOXY COMPOSITES

    OpenAIRE

    Huang, Chun-Heng

    2015-01-01

    Microfibrillated cellulose (MFC) is produced from naturally occurring, abundant and sustainable fibres of cellulose through mechanical treatments. It has been studied as a possible replacement for synthetic fibres in engineering composites, since it has many advantages that can enhance their mechanical properties.MFC and epoxy resin composites were prepared with varying weight fractions for three different sources of cellulose fibre (softwood Kraft pulp, hardwood Kraft pulp and recycled newsp...

  17. Factors Involved in Hydrolysis of Microcrystalline Cellulose by Acetivibrio cellulolyticus†

    OpenAIRE

    MacKenzie, C. Roger; Girishchandra B Patel; Bilous, Doris

    1987-01-01

    Acetivibrio cellulolyticus cellulase obtained by the water elution of residual cellulose from the growth medium was compared with the cellulase activity present in culture supernatants. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis indicated that water elution released most of the protein bands which adhered to undigested cellulose from the culture medium. The enzyme in the culture supernatant and that eluted from residual cellulose had specific activities for Avicel hydr...

  18. Method for providing a nanocellulose involving modifying cellulose fibers

    OpenAIRE

    Ankerfors, Mikael; Lindström, Tom

    2009-01-01

    The present invention provides a method for the manufacturing of nanocellulose. The method includes a first modification of the cellulose material, where the cellulose fibres are treated with an aqueous electrolyte-containing solution of an amphoteric cellulose derivative. The modification is followed by a mechanical treatment. By using this method for manufacturing nanocellulose, clogging of the mechanical apparatus is avoided. Also disclosed is nanocellulose manufactured in accordance with ...

  19. New developments of enzymatic treatments on cellulosic fibers

    OpenAIRE

    Kim, Su-Yeon; Zille, Andrea; Vasconcelos, Andreia; Paulo, Artur Cavaco

    2007-01-01

    In this review, we focused on the recent and non-conventional enzyme bioconversions of cellulosic fibers. Cellulosic fibers are the largest market of textile industry and also represent the most successful market for enzymes base processes in the textile area. The new enzyme developments presented on this paper include the strength recovering in resin-crosslinked fabrics, phosphorylation for better antiflame retardancy, coating and funcionalization of cellulosic fabrics.

  20. Derivatization-free gel permeation chromatography elucidates enzymatic cellulose hydrolysis

    OpenAIRE

    Engel Philip; Hein Lea; Spiess Antje C

    2012-01-01

    Abstract Background The analysis of cellulose molecular weight distributions by gel permeation chromatography (GPC) is a powerful tool to obtain detailed information on enzymatic cellulose hydrolysis, supporting the development of economically viable biorefinery processes. Unfortunately, due to work and time consuming sample preparation, the measurement of cellulose molecular weight distributions has a limited applicability until now. Results In this work we present a new method to analyze ce...

  1. Genetic organization of the cellulose synthase operon in Acetobacter xylinum.

    OpenAIRE

    Wong, H C; Fear, A L; Calhoon, R D; Eichinger, G H; Mayer, R; Amikam, D; Benziman, M; Gelfand, D H; Meade, J H; Emerick, A W

    1990-01-01

    An operon encoding four proteins required for bacterial cellulose biosynthesis (bcs) in Acetobacter xylinum was isolated via genetic complementation with strains lacking cellulose synthase activity. Nucleotide sequence analysis indicated that the cellulose synthase operon is 9217 base pairs long and consists of four genes. The four genes--bcsA, bcsB, bcsC, and bcsD--appear to be translationally coupled and transcribed as a polycistronic mRNA with an initiation site 97 bases upstream of the co...

  2. Blends of dissolved cellulose with acrylic acid copolymers or microfibrillated cellulose

    OpenAIRE

    Saarikoski, Eve

    2015-01-01

    The aim of the thesis was to develop dissolved cellulose (dissolved in NaOH/ZnO) based blends with acrylic acid copolymers (poly(ethylene-co-acrylic acid) (PE-co-AA) or poly(acrylamide-co-acrylic acid) (PAA-co-AA)) or microfibrillated cellulose (MFC) in the way they could be used in injection molding or for film/coating applications. This thesis summarizes the research reported in five publications supported by some unpublished results. Rheological studies done in the contexts of this work...

  3. A COMPARISON OF THE EFFICIENCY OF POLYCARBONATE AND MIXED CELLULOSE ESTER FILTERS FOR USE IN THE FILTRATION OF WATER SAMPLES

    Science.gov (United States)

    The federal standard for the presence of asbestos in drinking water mandates the use of transmission electron microscopy (TEM) as the only acceptable testing method. The July 17, 1992 Federal Register (57 FR 31839, Section 141.23(k)(4)) specifies that the analysis for as...

  4. COMPARISON OF THE EFFICIENCY OF POLYCARBONATE AND MIXED CELLULOSE ESTER FILTERS FOR USE IN THE FILTRATION OF WATER SAMPLES

    Science.gov (United States)

    The federal standard for the presence of asbestos in drinking water mandates the use of transmission electron microscopy (TEM) as the only acceptable testing method. he July 17, 1992 Federal Register (57 FR 31839 SS 141.23 (K) (4) ) specifies that the analysis for asbestos shall ...

  5. Continuous cellulosic bioethanol fermentation by cyclic fed-batch cocultivation.

    Science.gov (United States)

    Jiang, He-Long; He, Qiang; He, Zhili; Hemme, Christopher L; Wu, Liyou; Zhou, Jizhong

    2013-03-01

    Cocultivation of cellulolytic and saccharolytic microbial populations is a promising strategy to improve bioethanol production from the fermentation of recalcitrant cellulosic materials. Earlier studies have demonstrated the effectiveness of cocultivation in enhancing ethanolic fermentation of cellulose in batch fermentation. To further enhance process efficiency, a semicontinuous cyclic fed-batch fermentor configuration was evaluated for its potential in enhancing the efficiency of cellulose fermentation using cocultivation. Cocultures of cellulolytic Clostridium thermocellum LQRI and saccharolytic Thermoanaerobacter pseudethanolicus strain X514 were tested in the semicontinuous fermentor as a model system. Initial cellulose concentration and pH were identified as the key process parameters controlling cellulose fermentation performance in the fixed-volume cyclic fed-batch coculture system. At an initial cellulose concentration of 40 g liter(-1), the concentration of ethanol produced with pH control was 4.5-fold higher than that without pH control. It was also found that efficient cellulosic bioethanol production by cocultivation was sustained in the semicontinuous configuration, with bioethanol production reaching 474 mM in 96 h with an initial cellulose concentration of 80 g liter(-1) and pH controlled at 6.5 to 6.8. These results suggested the advantages of the cyclic fed-batch process for cellulosic bioethanol fermentation by the cocultures. PMID:23275517

  6. Effects of Ethanol Pulping on the Length of Bamboo Cellulose

    Institute of Scientific and Technical Information of China (English)

    Tao Yang; Liao Junhe; Luo Xuegang

    2006-01-01

    On the conditions of different ethanol concentration, acids and catalyzers, the effects of ethanol pulping on the cellulose length of bamboo were studied. The results indicates that ethanol pulping has remarkable effects on the length of cellulose, which is clearly reduced with adding ethanol and acid. The margin of length of cellulose become smaller with the increase of the catalyzer. When the ethanol concentration was 70%, the concentration of acid was 0.3% and some NaOH was used as catalyzer, the length of cellulose was the longest.

  7. Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces.

    Science.gov (United States)

    Aulin, Christian; Shchukarev, Andrei; Lindqvist, Josefina; Malmström, Eva; Wågberg, Lars; Lindström, Tom

    2008-01-15

    The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (theta e>90 degrees ) by castor oil. PMID:17964593

  8. Characterization of Bacterial Cellulose by Gluconacetobacter hansenii CGMCC 3917.

    Science.gov (United States)

    Feng, Xianchao; Ullah, Niamat; Wang, Xuejiao; Sun, Xuchun; Li, Chenyi; Bai, Yun; Chen, Lin; Li, Zhixi

    2015-10-01

    In this study, comprehensive characterization and drying methods on properties of bacterial cellulose were analyzed. Bacterial cellulose was prepared by Gluconacetobacter hansenii CGMCC 3917, which was mutated by high hydrostatic pressure (HHP) treatment. Bacterial cellulose is mainly comprised of cellulose Iα with high crystallinity and purity. High-water holding and absorption capacity were examined by reticulated structure. Thermogravimetric analysis showed high thermal stability. High tensile strength and Young's modulus indicated its mechanical properties. The rheological analysis showed that bacterial cellulose had good consistency and viscosity. These results indicated that bacterial cellulose is a potential food additive and also could be used for a food packaging material. The high textural stability during freeze-thaw cycles makes bacterial cellulose an effective additive for frozen food products. In addition, the properties of bacterial cellulose can be affected by drying methods. Our results suggest that the bacterial cellulose produced from HHP-mutant strain has an effective characterization, which can be used for a wide range of applications in food industry. PMID:26352877

  9. Investigation of Bacterial Cellulose Biosynthesis Mechanism in Gluconoacetobacter hansenii

    OpenAIRE

    Mohite, Bhavna V.; Patil, Satish V

    2014-01-01

    The present study explores the mechanism of cellulose biosynthesis in Gluconoacetobacter hansenii. The cellulose synthase enzyme was purified as membrane fraction and solubilized by treatment with 0.1% digitonin. The enzyme was separated by native-gel electrophoresis and β -D-glucan analysis was carried out using in vitro gel assay. The cellulose synthase has glycoprotein nature and composed two polypeptide subunits of 93 KDa and 85 KDa. The confirmation of β -1,4-glucan (cellulose) was perfo...

  10. Modeling of Carbohydrate Binding Modules Complexed to Cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Nimlos, M. R.; Beckham, G. T.; Bu, L.; Himmel, M. E.; Crowley, M. F.; Bomble, Y. J.

    2012-01-01

    Modeling results are presented for the interaction of two carbohydrate binding modules (CBMs) with cellulose. The family 1 CBM from Trichoderma reesei's Cel7A cellulase was modeled using molecular dynamics to confirm that this protein selectively binds to the hydrophobic (100) surface of cellulose fibrils and to determine the energetics and mechanisms for locating this surface. Modeling was also conducted of binding of the family 4 CBM from the CbhA complex from Clostridium thermocellum. There is a cleft in this protein, which may accommodate a cellulose chain that is detached from crystalline cellulose. This possibility is explored using molecular dynamics.

  11. Short-chain aliphatic ester synthesis using Thermobifida fusca cutinase.

    Science.gov (United States)

    Su, Lingqia; Hong, Ruoyu; Guo, Xiaojie; Wu, Jing; Xia, Yongmei

    2016-09-01

    Short-chain aliphatic esters are commonly used as fruit flavorings in the food industry. In this study, Thermobifida fusca (T. fusca) cutinase was used for the synthesis of aliphatic esters, and the maximum yield of ethyl caproate reached 99.2% at a cutinase concentration of 50U/ml, 40°C, and water content of 0.5%, representing the highest ester yield to date. The cutinase-catalyzed esterification displayed strong tolerance for water content (up to 8%) and acid concentration (up to 0.8M). At substrate concentrations ⩽0.8M, the ester yield remained above 80%. Moreover, ester yields of more than 98% and 95% were achieved for acids of C3-C8 and alcohols of C1-C6, respectively, indicating extensive chain length selectivity of the cutinase. These results demonstrate the superior ability of T. fusca cutinase to catalyze the synthesis of short-chain esters. This study provides the basis for industrial production of short-chain esters using T. fusca cutinase. PMID:27041308

  12. Engineering control of bacterial cellulose production using a genetic toolkit and a new cellulose-producing strain

    Science.gov (United States)

    Florea, Michael; Hagemann, Henrik; Santosa, Gabriella; Micklem, Chris N.; Spencer-Milnes, Xenia; de Arroyo Garcia, Laura; Paschou, Despoina; Lazenbatt, Christopher; Kong, Deze; Chughtai, Haroon; Jensen, Kirsten; Freemont, Paul S.; Kitney, Richard; Reeve, Benjamin; Ellis, Tom

    2016-01-01

    Bacterial cellulose is a strong and ultrapure form of cellulose produced naturally by several species of the Acetobacteraceae. Its high strength, purity, and biocompatibility make it of great interest to materials science; however, precise control of its biosynthesis has remained a challenge for biotechnology. Here we isolate a strain of Komagataeibacter rhaeticus (K. rhaeticus iGEM) that can produce cellulose at high yields, grow in low-nitrogen conditions, and is highly resistant to toxic chemicals. We achieved external control over its bacterial cellulose production through development of a modular genetic toolkit that enables rational reprogramming of the cell. To further its use as an organism for biotechnology, we sequenced its genome and demonstrate genetic circuits that enable functionalization and patterning of heterologous gene expression within the cellulose matrix. This work lays the foundations for using genetic engineering to produce cellulose-based materials, with numerous applications in basic science, materials engineering, and biotechnology. PMID:27247386

  13. Engineering control of bacterial cellulose production using a genetic toolkit and a new cellulose-producing strain.

    Science.gov (United States)

    Florea, Michael; Hagemann, Henrik; Santosa, Gabriella; Abbott, James; Micklem, Chris N; Spencer-Milnes, Xenia; de Arroyo Garcia, Laura; Paschou, Despoina; Lazenbatt, Christopher; Kong, Deze; Chughtai, Haroon; Jensen, Kirsten; Freemont, Paul S; Kitney, Richard; Reeve, Benjamin; Ellis, Tom

    2016-06-14

    Bacterial cellulose is a strong and ultrapure form of cellulose produced naturally by several species of the Acetobacteraceae Its high strength, purity, and biocompatibility make it of great interest to materials science; however, precise control of its biosynthesis has remained a challenge for biotechnology. Here we isolate a strain of Komagataeibacter rhaeticus (K. rhaeticus iGEM) that can produce cellulose at high yields, grow in low-nitrogen conditions, and is highly resistant to toxic chemicals. We achieved external control over its bacterial cellulose production through development of a modular genetic toolkit that enables rational reprogramming of the cell. To further its use as an organism for biotechnology, we sequenced its genome and demonstrate genetic circuits that enable functionalization and patterning of heterologous gene expression within the cellulose matrix. This work lays the foundations for using genetic engineering to produce cellulose-based materials, with numerous applications in basic science, materials engineering, and biotechnology. PMID:27247386

  14. Nanofibrillated Cellulose (NFC): A High-Value Co-Product that Improves the Economics of Cellulosic Ethanol Production

    OpenAIRE

    Qiong Song; William T. Winter; Biljana M. Bujanovic; Thomas E. Amidon

    2014-01-01

    Cellulosic ethanol is a sustainable alternative to petroleum as a transportation fuel, which could be made biologically from agricultural and forestry residues, municipal waste, or herbaceous and woody crops. Instead of putting efforts on steps overcoming the natural resistance of plants to biological breakdown, our study proposes a unique pathway to improve the outcome of the process by co-producing high-value nanofibrillated cellulose (NFC), offering a new economic leverage for cellulosic e...

  15. Engineering control of bacterial cellulose production using a genetic toolkit and a new cellulose-producing strain

    OpenAIRE

    Florea, Michael; Hagemann, Henrik; Santosa, Gabriella; Abbott, James; Micklem, Chris N.; Spencer-Milnes, Xenia; de Arroyo Garcia, Laura; Paschou, Despoina; Lazenbatt, Christopher; Kong, Deze; Chughtai, Haroon; Jensen, Kirsten; Freemont, Paul S.; Kitney, Richard; Reeve, Benjamin

    2016-01-01

    Bacterial cellulose is a remarkable material that is malleable, biocompatible, and over 10-times stronger than plant-based cellulose. It is currently used to create materials for tissue engineering, medicine, defense, electronics, acoustics, and fabrics. We describe here a bacterial strain that is readily amenable to genetic engineering and produces high quantities of bacterial cellulose in low-cost media. To reprogram this organism for biotechnology applications, we created a set of genetic ...

  16. Biological production of organic solvents from cellulosic wastes. Six-month progress report, June 1977

    Energy Technology Data Exchange (ETDEWEB)

    Forro, J.R.; Nolan, E.J.

    1977-01-01

    Progress is reported in the following studies: production of cellulose by culturing Thermoactinomyces YX and derived mutants; the development of mutation techniques; cellulose mutant screening techniques; quantification of cellulose mutants; and alternate enhancement techniques. (JGB)

  17. Effects of phorbol esters in carp (Cyprinus carpio L).

    Science.gov (United States)

    Becker, K; Makkar, H P

    1998-04-01

    Carp (Cyprinus carpio L) were fed diets containing phorbol esters at concentrations of 0, 3.75, 7.5, 15, 31, 62.5, 125, 250, 500 and 1,000 micrograms/g feed. Phorbol esters were from Jatropha curcas nuts. Jatropha curcas toxicity has been reported in humans, rodents and livestock, and phorbol esters have been identified as the main toxic agent. The adverse effects observed in carp at phorbol esters concentrations of 31 micrograms/g or higher were lower average metabolic growth rate, fecal mucus production and rejection of feed. Average metabolic growth rates (g/kg 0.8/d) in a 7-d experimental period during which diets containing phorbol esters were fed to carp (values with different letters being significantly different) were 15.4a, 14.4a, 12.5ab, 12.4ab, 10.9b, 3.4c, 0.2c, -3.8d, -4.9d and -5.6d, respectively, at the above mentioned concentrations. The values for the recovery phase of 9-d during which phorbol esters were not included in the diet were 16.0a, 15.6a, 14.9a, 15.6a, 5.3b, 1.6b, 4.6bc, 6.3bc, 7.8c and 8.2c, respectively. The adverse effects of phorbol esters were reversible since withdrawal of the esters from the diets led to gain in body mass. None of the fish died at any of the concentrations studied. Incorporation of vitamin C, an antioxidant, at levels of 0.4 and 2% in the feed did not prevent occurrence of the adverse effects of the phorbol esters. The threshold level at which phorbol esters appeared to cause adverse effects in carp was 15 micrograms/g feed or 15 ppm in the diet. Carp were highly sensitive to phorbol esters, thus making them a useful species for bioassay of these compounds. This bioassay together with other analytic procedures could be of immense use in the development of detoxification processes for agro-industrial products containing phorbol esters, such as jatropha meal or jatropha oil, and as a quality control method to monitor successive stages in industrial detoxification processes. PMID:9554059

  18. Distillative self-sorting of dynamic ester libraries.

    Science.gov (United States)

    Ji, Qing; Miljanić, Ognjen Š

    2013-12-20

    Metal alkoxides, such as NaOt-Bu or Ti(OBu)4, can initiate acyl exchange within complex ester libraries. Reactive distillation of such dynamic combinatorial libraries (DCLs) isolates the most volatile ester at the expense of the less volatile library members that share a constituent with it. This process can be iteratively repeated to yield up to four industrially relevant esters as pure products from a single reaction setup. An algorithm has been developed to predict reactive distillation products in DCLs of as many as 121 members. PMID:24245808

  19. Chemical modification of viscose fibres by adsorption of carboxymethyl cellulose and click chemistry

    OpenAIRE

    Anufrijeva, Olga

    2014-01-01

    Functionalization of cellulosic materials to achieve new and advanced properties is a widely explored research area. This thesis is focused on the novel approach for modification of cellulosic materials by the combination of adsorption of carboxymethyl cellulose (CMC) onto cellulose surface and the copper-catalyzed azide-alkyne cycloaddition (CuAAC) “click” reaction. The literature part gives an overview on the basics of cellulose chemistry, chemical functionalization of cellulose, as wel...

  20. Impact of the supramolecular structure of cellulose on the efficiency of enzymatic hydrolysis

    OpenAIRE

    Peciulyte, Ausra; Karlström, Katarina; Larsson, Per Tomas; Olsson, Lisbeth

    2015-01-01

    Background The efficiency of enzymatic hydrolysis is reduced by the structural properties of cellulose. Although efforts have been made to explain the mechanism of enzymatic hydrolysis of cellulose by considering the interaction of cellulolytic enzymes with cellulose or the changes in the structure of cellulose during enzymatic hydrolysis, the process of cellulose hydrolysis is not yet fully understood. We have analysed the characteristics of the complex supramolecular structure of cellulose ...

  1. Effect of Surface Charge on Surface-Initiated Atom Transfer Radical Polymerization from Cellulose Nanocrystals in Aqueous Media.

    Science.gov (United States)

    Zoppe, Justin O; Xu, Xingyu; Känel, Cindy; Orsolini, Paola; Siqueira, Gilberto; Tingaut, Philippe; Zimmermann, Tanja; Klok, Harm-Anton

    2016-04-11

    Cellulose nanocrystals (CNCs) with different charge densities were utilized to examine the role of electrostatic interactions on surface-initiated atom transfer radical polymerization (SI-ATRP) in aqueous media. To this end, growth of hydrophilic uncharged poly(N,N-dimethylacrylamide) (PDMAM) brushes was monitored by electrophoresis, (1)H NMR spectroscopy, and dynamic light scattering (DLS). Molecular weight and polydispersity of PDMAM brushes was determined by GPC analysis of hydrolytically cleaved polymers. Initiator and polymer brush grafting densities, and thus, initiator efficiencies were derived from elemental analysis. Higher initiator efficiency of polymer brush growth was observed for CNCs with higher anionic surface sulfate half-ester group density, but at the expense of high polydispersity caused by inefficient deactivation. PDMAM grafts with number-average molecular weights up to 530 kDa and polydispersity indices Cu-mediated SI-CRP are analogous to those conducted in solution. PMID:26901869

  2. Composite edible films based on hydroxypropyl methyl cellulose reinforced with microcrystalline cellulose nanoparticles

    Science.gov (United States)

    It has been stated that hydroxypropyl methyl cellulose (HPMC) based films have promising applications in the food industry because of their environmental appeal, low cost, flexibility and transparency. Nevertheless, their mechanical and moisture barrier properties should be improved. The aim of th...

  3. Chromophores in cellulosics, XI: isolation and identification of residual chromophores from bacterial cellulose

    Science.gov (United States)

    Cotton or linen fabrics and paper, as well as other items composed chiefly of cellulose, tend to change to a yellow or brown color as they age. The change in color is usually accompanied by increased brittleness and loss of strength, as well. A cause of these phenomena is thought to be the formation...

  4. Chromosphores in cellulosics, XI: isoloation and identification of residual chromophores from bacterial cellulose

    Science.gov (United States)

    In the present work, bacterial cellulose (BC) was analyzed for its chromophore content with the chromophore release and identification (CRI) method. In aged BC, seven chromophores were unambiguously identified, despite their very low (ppb) presence. The compounds contain 2-hydroxy-[1,4]benzoquinone,...

  5. Mineralization of cellulose in frozen boreal soils

    Science.gov (United States)

    Oquist, Mats G.; Segura, Javier; Sparrman, Tobias; Nilsson, Mats; Schleucher, Jurgen

    2015-04-01

    Soils of high-latitude ecosystems store a large fraction of the global soil carbon. In boreal forests, the microbial mineralization of soil organic matter (SOM) during winter can affect the ecosystems net carbon balance. Recent research has shown that microorganisms in the organic surface layer of boreal forest soil can mineralize and grow on simple, soluble monomeric substrates under frozen conditions. However, any substantial impacts of microbial activity in frozen soils on long-term soil carbon balances ultimately depends on whether soil microorganisms can utilize and grow the more complex, polymeric constituents of SOM. In order to evaluate the potential for soil microorganisms to metabolize carbon polymers at low temperatures, we incubated boreal forest soil samples amended with [13C]-cellulose and studied the microbial catabolic and anabolic utilization of the substrate under frozen and unfrozen conditions (-4 and +4°C). Freezing of the soil markedly reduced microbial utilization of the cellulose. The [13C]-CO2 production rate in the samples at +4°C were 0.52 mg CO2 SOM -1 day-1 while rates in the frozen samples (-4°C) were 0.01 mg CO2 SOM -1 day-1. However, newly synthetized [13C]-enriched cell membrane lipids, PLFAs, were detected in soil samples incubated both above and below freezing, confirming that cellulose can sustain also anabolic activity of the microbial populations under frozen conditions. The reduced metabolic rates induced by freezing indicate constraints on exoenzymatic activity, as well as substrate diffusion rates that we can attribute to reduced liquid water content of the frozen soil. We conclude that the microbial population in boreal forest soil has the capacity to metabolize, and grow, on polymeric substrates at temperatures below zero, which involves maintaining exoenzymatic activity in frozen soils. This capacity manifests the importance of SOM mineralization during the winter season and its importance for the net carbon balance of

  6. Stereoselective formation of trisubstituted vinyl boronate esters by the acid-mediated elimination of α-hydroxyboronate esters.

    Science.gov (United States)

    Guan, Weiye; Michael, Alicia K; McIntosh, Melissa L; Koren-Selfridge, Liza; Scott, John P; Clark, Timothy B

    2014-08-01

    The copper-catalyzed diboration of ketones followed by an acid-catalyzed elimination leads to the formation of 1,1-disubstituted and trisubstituted vinyl boronate esters with moderate to good yields and selectivity. Addition of tosic acid to the crude diboration products provides the corresponding vinyl boronate esters upon elimination. The trisubstituted vinyl boronate esters are formed as the (Z)-olefin isomer, which was established by subjecting the products to a Suzuki-Miyaura coupling reaction to obtain alkenes of known geometry. PMID:24915498

  7. Synthesis of Nanocrystalline Cellulose Stabilized Copper Nanoparticles

    OpenAIRE

    Aminu Musa; Ahmad, Mansor B.; Mohd Zobir Hussein; Saiman Mohd Izham; Kamyar Shameli; Hannatu Abubakar Sani

    2016-01-01

    A chemical reduction method was employed for the synthesis of copper nanoparticles stabilized by nanocrystalline cellulose (NCC) using different concentrations of copper salt in aqueous solution under atmospheric air. CuSO4·5H2O salt and hydrazine were used as metal ion precursor and reducing agent, respectively. Ascorbic acid and aqueous NaOH were also used as an antioxidant and a pH moderator, respectively. The number of CuNPs increased with increasing concentration of the precursor salt. T...

  8. Electrospun cellulose nitrate and polycaprolactone blended nanofibers

    Science.gov (United States)

    Nartker, Steven; Hassan, Mohamed; Stogsdill, Michael

    2015-03-01

    Pure cellulose nitrate (CN) and blends of CN and polycaprolactone were electrospun to form nonwoven mats. Polymers were dissolved in a mixed solvent system of tetrahydrofuran and N,N-dimethylformamide. The concentrations were varied to obtain sub-micron and nanoscale fiber mats. Fiber mats were analyzed using scanning electron microscopy, contact angle analysis, Fourier transform infrared spectroscopy and thermal gravimetric analysis. The fiber morphology, surface chemistry and contact angle data show that these electrospun materials are suitable for applications including biosensing, biomedical and tissue engineering.

  9. A Sorption Hysteresis Model For Cellulosic Materials

    DEFF Research Database (Denmark)

    Frandsen, Henrik Lund; Damkilde, Lars

    2006-01-01

    The equilibrium concentration of adsorbed water in cellulosic materials is dependent on the history of the variations of vapor pressure in the ambient air, i.e. sorption hysteresis. Existing models to describe this phenomenon such as the independent domain theory have numerical drawbacks and....../or imply accounting for the entire history variations of every material point. This paper presents a sorption hysteresis model based on a state formulation and expressed in closed-form solutions, which makes it suitable for implementation into a numerical method....

  10. Mechanical Properties of Cellulose Microfiber Reinforced Polyolefin

    Science.gov (United States)

    Kobayashi, Satoshi; Yamada, Hiroyuki

    Cellulose microfiber (CeF) has been expected as a reinforcement of polymer because of its high modulus and strength and lower cost. In the present study, mechanical properties of CeF/polyolefin were investigated. Tensile modulus increased with increasing CeF content. On the other hand, tensile strength decreased. Fatigue properties were also investigated with acoustic emission measurement. Stiffness of the composites gradually decreased with loading. Drastic decrease in stiffness was observed just before the final fracture. Based on the Mori-Tanaka's theory, the method to calculate modulus of CeF were proposed to evaluate dispersion of CeF.

  11. Structural basis for entropy-driven cellulose binding by a type-A cellulose-binding module (CBM) and bacterial expansin

    OpenAIRE

    Georgelis, Nikolaos; Yennawar, Neela H.; Cosgrove, Daniel J.

    2012-01-01

    Components of modular cellulases, type-A cellulose-binding modules (CBMs) bind to crystalline cellulose and enhance enzyme effectiveness, but structural details of the interaction are uncertain. We analyzed cellulose binding by EXLX1, a bacterial expansin with ability to loosen plant cell walls and whose domain D2 has type-A CBM characteristics. EXLX1 strongly binds to crystalline cellulose via D2, whereas its affinity for soluble cellooligosaccharides is weak. Calorimetry indicated cellulose...

  12. Methods of refining and producing dibasic esters and acids from natural oil feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Snead, Thomas E.; Cohen, Steven A.; Gildon, Demond L.

    2016-03-15

    Methods are provided for refining natural oil feedstocks and producing dibasic esters and/or dibasic acids. The methods comprise reacting a terminal olefin with an internal olefin in the presence of a metathesis catalyst to form a dibasic ester and/or dibasic acid. In certain embodiments, the olefin esters are formed by reacting the feedstock in the presence of a metathesis catalyst under conditions sufficient to form a metathesized product comprising olefins and esters, separating the olefins from the esters in the metathesized product, and transesterifying the esters in the presence of an alcohol to form a transesterified product having olefin esters.

  13. Rare linking hydrogels based on acrylic acid and carbohydrate esters

    Directory of Open Access Journals (Sweden)

    U. Akhmedov

    2012-09-01

    Full Text Available The process of copolymerization of acrylic acid and esters poliallil sucrose; pentaerythritol and sorbitol, some of its laws are identified. The kinetic regularities of copolymerization and the optimum conditions of synthesis was established.

  14. Alternating Poly(ester-anhydride) by Insertion Polycondensation.

    Science.gov (United States)

    Haim-Zada, Moran; Basu, Arijit; Hagigit, Tal; Schlinger, Ron; Grishko, Michael; Kraminsky, Alexander; Hanuka, Ezra; Domb, Abraham J

    2016-06-13

    We report on a synthetic method where polyanhydride is used as starting material and the ester monomers are inserted through complete esterification, leading to an alternating ester-anhydride copolymer. The molar ratio of ricinoleic acid (RA) and sebacic acid (SA) was optimized until polysebacic acid is completely converted to carboxylic acid-terminated RA-SA and RA-SA-RA ester-dicarboxylic acids. These dimers and trimers were activated with acetic anhydride, polymerized under heat and vacuum to yield alternating RA-SA copolymer. The resulting alternating poly(ester-anhydride) have the RA at regular intervals. The regular occurrences of RA side chains prevent anhydride interchange, enhancing hydrolytic stability, which allows storage of the polymer at room temperature. PMID:27198864

  15. Syntheses of glucomannan esters and their thermal and mechanical properties.

    Science.gov (United States)

    Enomoto-Rogers, Yukiko; Ohmomo, Yusuke; Takemura, Akio; Iwata, Tadahisa

    2014-01-30

    Fully substituted glucomannan (GM) acylates with acyl carbon numbers (n) of 2, 3, 4, 5, 6, 8, 10, and 12 were prepared from konjac GM (KGM) in carboxylic acid/trifluoroacetic anhydride (TFAA). GM acetate acylates (n=3, 4, 5, 8, 12, 16, and 18) were prepared from KGM in acetic acid/carboxylic acid/TFAA. Differential scanning calorimetry (DSC) and X-ray diffraction revealed that the GM esters did not exhibit melting peaks and reflections derived from crystal, indicating they were amorphous. The glass-transition temperatures (Tgs) of the GM esters tended to decrease with increasing acyl carbon number, ranging from 174°C for GM acetate (GMAc) to 64°C for GM laurate (GMLa). Colorless and transparent GM ester films were obtained by solvent casting and thermo-pressing. The mechanical properties of the GM ester films were controlled by the acyl group structure. PMID:24299815

  16. Decarbonylative organoboron cross-coupling of esters by nickel catalysis.

    Science.gov (United States)

    Muto, Kei; Yamaguchi, Junichiro; Musaev, Djamaladdin G; Itami, Kenichiro

    2015-01-01

    The Suzuki-Miyaura cross-coupling is a metal-catalysed reaction in which boron-based nucleophiles and halide-based electrophiles are reacted to form a single molecule. This is one of the most reliable tools in synthetic chemistry, and is extensively used in the synthesis of pharmaceuticals, agrochemicals and organic materials. Herein, we report a significant advance in the choice of electrophilic coupling partner in this reaction. With a user-friendly and inexpensive nickel catalyst, a range of phenyl esters of aromatic, heteroaromatic and aliphatic carboxylic acids react with boronic acids in a decarbonylative manner. Overall, phenyl ester moieties function as leaving groups. Theoretical calculations uncovered key mechanistic features of this unusual decarbonylative coupling. Since extraordinary numbers of ester-containing molecules are available both commercially and synthetically, this new 'ester' cross-coupling should find significant use in synthetic chemistry as an alternative to the standard halide-based Suzuki-Miyaura coupling. PMID:26118733

  17. Methods of refining and producing isomerized fatty acid esters and fatty acids from natural oil feedstocks

    Energy Technology Data Exchange (ETDEWEB)

    Snead, Thomas E.; Cohen, Steven A.; Gildon, Demond L.; Beltran, Leslie V.; Kunz, Linda A.; Pals, Tessa M.; Quinn, Jordan R; Behrends, Jr., Raymond T.; Bernhardt, Randal J.

    2016-07-05

    Methods are provided for refining natural oil feedstocks and producing isomerized esters and acids. The methods comprise providing a C4-C18 unsaturated fatty ester or acid, and isomerizing the fatty acid ester or acid in the presence of heat or an isomerization catalyst to form an isomerized fatty ester or acid. In some embodiments, the methods comprise forming a dibasic ester or dibasic acid prior to the isomerizing step. In certain embodiments, the methods further comprise hydrolyzing the dibasic ester to form a dibasic acid. In certain embodiments, the olefin is formed by reacting the feedstock in the presence of a metathesis catalyst under conditions sufficient to form a metathesized product comprising olefins and esters, separating the olefins from the esters in the metathesized product, and transesterifying the esters in the presence of an alcohol to form a transesterified product having unsaturated esters.

  18. RAFT Polymerization of Vinyl Esters: Synthesis and Applications

    OpenAIRE

    Simon Harrisson; Xuan Liu; Jean-Noël Ollagnier; Olivier Coutelier; Jean-Daniel Marty; Mathias Destarac

    2014-01-01

    This article is the first comprehensive review on the study and use of vinyl ester monomers in reversible addition fragmentation chain transfer (RAFT) polymerization. It covers all the synthetic aspects associated with the definition of precision polymers comprising poly(vinyl ester) building blocks, such as the choice of RAFT agent and reaction conditions in order to progress from simple to complex macromolecular architectures. Although vinyl acetate was by far the most studied monomer of th...

  19. A newly discovered xenobiotic metabolic pathway: Ethyl ester formation

    Energy Technology Data Exchange (ETDEWEB)

    Chou, R.C.; Wyss, R.; Huselton, C.A.; Wiegand, U.W. (F. Hoffmann-La Roche Ltd., Basel (Switzerland))

    1991-01-01

    Formation of etretinate, ethyl ester of acitretin, can be confirmed in vitro and in vivo using acitretin as the substrate. Etretinate was identified by LC/MS. The in vitro incubation was performed using rat and human liver 12000 g supernatant, and the in vivo experiment was conducted in rats after oral dosing of acitretin. The ethyl ester formation was greatly enhanced by addition of or dosing with ethanol.

  20. Rheology of silicon carbide/vinyl ester nanocomposites

    OpenAIRE

    Yong, Virginia; Hahn, H. Thomas

    2006-01-01

    Silicon carbide (SiC) nanoparticles with no surface treatment raise the viscosity of a vinyl ester resin much more intensely than micrometer-size SiC particles. An effective dispersant generally causes a reduction in the resin viscosity attributed to its surface-active properties and thereby increases the maximum fraction of particles that can be introduced. This article assesses the rheological behavior of SiC-nanoparticle-filled vinyl ester resin systems with the Bingham, power-law, Hersche...

  1. The enantioselective b-keto ester reductions by Saccharomyces cerevisiae

    Directory of Open Access Journals (Sweden)

    HASSAN TAJIK

    2006-09-01

    Full Text Available The enantioselective yeast reduction of aromatic b-keto esters, by use of potassium dihydrogen phosphate, calcium phosphate (monobasic, magnesium sulfate and ammonium tartrate (diammonium salt (10:1:1:50 in water at pH 7 as a buffer for 72–120 h with 45–90 % conversion to the corresponding aromatic -hydroxy esters was achieved by means of Saccharomyces cerevisiae.

  2. Transport of glutathione diethyl ester into human cells.

    OpenAIRE

    Levy, E J; Anderson, M E; Meister, A.

    1993-01-01

    Glutathione monoesters in which the carboxyl group of the glycine residue is esterified were previously found, in contrast to glutathione itself, to be effectively transported into various types of cells and to be converted intracellularly into glutathione. Glutathione monoesters are thus useful for prevention of oxidative stress, certain toxicities, and for treatment of glutathione deficiency. Glutathione diethyl ester is rapidly split to the glutathione monoethyl ester by mouse plasma gluta...

  3. Mechanism of plasma cholesteryl ester transfer in hypertriglyceridemia.

    OpenAIRE

    Mann, C J; Yen, F T; Grant, A M; Bihain, B E

    1991-01-01

    Plasma net cholesteryl ester (CE) transfer and optimum cholesteryl ester transfer protein (CETP) activity were determined in primary hypertriglyceridemic (n = 11) and normolipidemic (n = 15) individuals. The hypertriglyceridemic group demonstrated threefold greater net CE transfer leading to enhanced accumulation of CE in VLDL. This increased net transfer was not accompanied by a change in CETP activity. In normolipidemia, but not in hypertriglyceridemia, net CE transfer correlated with VLDL ...

  4. Cellulose microfibril deposition: coordinated activity at the plant plasma membrane

    NARCIS (Netherlands)

    Lindeboom, J.J.; Mulder, B.; Vos, J.W.; Ketelaar, M.J.; Emons, A.M.C.

    2008-01-01

    Plant cell wall production is a membrane-bound process. Cell walls are composed of cellulose microfibrils, embedded inside a matrix of other polysaccharides and glycoproteins. The cell wall matrix is extruded into the existing cell wall by exocytosis. This same process also inserts the cellulose syn

  5. Approaches to new derivatives of cellulose as designed pharmaceutical excipients

    OpenAIRE

    Schwarz Brigitte; Loppert Renate; Praznik Werner; Unger Frank Michael; Kahlig Hanspeter; Viernstein Helmut

    2003-01-01

    Recently, our group initiated a synthetic program directed at new derivatives of cellulose intended as novel pharmaceutical excipients. With several notable exceptions, the attempted regioselective introduction of chemical functionality into natural cellulose by direct chemical modification will result in heterogeneous products that are difficult to characterize and the preparation of which is insufficiently reproduceable. Approaches to the chemical polymerization of appropriate glucose monom...

  6. Single Molecule Study of Cellulase Hydrolysis of Crystalline Cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Y.-S.; Luo, Y.; Baker, J. O.; Zeng, Y.; Himmel, M. E.; Smith, S.; Ding, S.-Y.

    2009-12-01

    This report seeks to elucidate the role of cellobiohydrolase-I (CBH I) in the hydrolysis of crystalline cellulose. A single-molecule approach uses various imaging techniques to investigate the surface structure of crystalline cellulose and changes made in the structure by CBH I.

  7. Addressing Cellulose Acetate Microfilm from a British Library perspective

    Directory of Open Access Journals (Sweden)

    Helen Shenton

    2005-08-01

    Full Text Available This paper is about cellulose acetate microfilm from the British Library perspective. It traces how acetate microfilm became an issue for the British Library and describes cellulose acetate deterioration. This is followed by details of what has already been done about the situation and what action is planned for the future.

  8. Bioconversion of cellulose. Work progress for FY 1980

    Science.gov (United States)

    Wilke, C. R.; Blanch, H. W.

    1981-03-01

    Progress is reported on the following: kinetic and mechanistic studies on cellulose enzymes, yeast nutrition, models of yeast growth and ethanol inhibition, by product inhibition in cell recycle and vacuum fermentation, hollow fiber reactor, thermodynamics of ethanol water systems, novel ethanol water separations, and simultaneous and sequential cellulose fermenting organisms.

  9. Cellulose synthesizing Complexes in Vascular Plants andProcaryotes

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Richard M, Jr; Saxena, Inder Mohan

    2009-07-07

    Continuing the work initiated under DE-FG03-94ER20145, the following major accomplishments were achieved under DE-FG02-03ER15396 from 2003-2007: (a) we purified the acsD gene product of the Acetobacter cellulose synthase operon as well as transferred the CesA cellulose gene from Gossypium into E. coli in an attempt to crystallize this protein for x-ray diffraction structural analysis; however, crystallization attempts proved unsuccessful; (b) the Acetobacter cellulose synthase operon was successfully incorporated into Synechococcus, a cyanobacterium2; (c) this operon in Synechococcus was functionally expressed; (d) we successfully immunolabeled Vigna cellulose and callose synthase components and mapped their distribution before and after wounding; (e) we developed a novel method to produce replicas of cellulose synthases in tobacco BY-2 cells, and we demonstrated the cytoplasmic domain of the rosette TC; (f) from the moss Physcomitrella, we isolated two full-length cDNA sequences of cellulose synthase (PpCesA1 and PpCesA2) and attempted to obtain full genomic DNA sequences; (g) we examined the detailed molecular structure of a new form of non-crystalline cellulose known as nematic ordered cellulose (=NOC)3.

  10. Cellulose-Lignin interactions during slow and fast pyrolysis

    NARCIS (Netherlands)

    Hilbers, T.J.; Wang, Z.; Pecha, B.; Westerhof, R.J.M.; Kersten, S.R.A.; Pelaez-Samaniego, M.R.; Garcia-Perez, M.

    2015-01-01

    The interactions between lignin and cellulose during the slow pyrolysis of their blends were studied by means of Thermogravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM). Fast pyrolysis was studied using Pyrolysis-Gas Chromatography/Mass Spectroscopy (Py–GC/MS). Crystalline cellulose

  11. Dual morphology (fibres and particles) cellulosic filler for WPC materials

    Science.gov (United States)

    Valente, Marco; Tirillò, Jacopo; Quitadamo, Alessia; Santulli, Carlo

    2016-05-01

    Wood-plastic composites (WPC) were fabricated by using a polyethylene (PE) matrix and filling it with wood flour in the amount of 30 wt.%, and compared with the same composites with further amount of 10 wt.% of cellulosic recycled fibres added. The materials were produced by turbomixing and subsequent moulding under pressure. Mechanical properties of both WPC and WPC with cellulosic recycled fibres were evaluated through mechanical and physical-chemical tests. Tensile tests clarified that a moderate reduction is strength is observed with the bare introduction of wood flour with respect to the neat PE matrix, whilst some recovery is offered by the addition of recycled cellulose fibres. Even more promisingly, the elastic modulus of PE matrix is substantially improved by the addition of wood flour (around 8% on average) and much more so with the further addition of recycled cellulose (around 20% on average). The fracture surfaces from the tensile test were analysed by scanning electron microscope (SEM) indicating a reduction in microporosity as an effect of added cellulose. The water absorption test and the hardness measure (Shore D) were also performed. SEM analysis underlined the weak interface between both wood particle and cellulosic recycled fibres and matrix. The water absorption test showed a higher mass variation for pure WPC than WPC with cellulosic recycled fibres. The hardness measurement showed that the presence of cellulosic recycled fibres improves both superficial hardness of the composite and temperature resistance.

  12. Solid state crystallisation of oligosaccharide ester derivatives

    CERN Document Server

    Wright, E A

    2002-01-01

    An investigation of the solid state properties of oligosaccharide ester derivatives (OEDs) with potential applications in drug delivery has been carried out. The amorphous form of two OEDs, trehalose octa-acetate (TOAC) and 6:6'-di-(beta-tetraacetyl glucuronyl)-hexaacetyl trehalose (TR153), was investigated as a matrix for the sustained release of active ingredients. The matrices showed a tendency to crystallise and so polymorph screens were performed to provide crystalline samples for structural analysis. The crystal structures of TOAC methanolate and TR153 acetonitrile solvate have been determined by single-crystal laboratory X-ray diffraction. TOAC methanolate crystallises in the orthorhombic space group P2 sub 1 2 sub 1 2 sub 1 with a = 15.429(18) A, b = 17.934(19) A and c = 13.518(4) A at 123 K. The structure is isomorphous with the previously reported structure of TOAC monohydrate form II. TR153 acetonitrile solvate crystallises in the monoclinic spacegroup C2 with a = 30:160(6) A, b = 11.878(3) A, c 20...

  13. Combustion characteristics of the mustard methyl esters

    International Nuclear Information System (INIS)

    Mustard Methyl Esters (further bio diesel) and regular diesel fuel were tested in direct injection diesel engine. Analysis of experimental data was supported by an analysis of fuel injection and combustion characteristics. Engine fuelled with bio diesel had increased brake specific fuel consumption, reduced nitrogen oxides emission and smoke opacity, moderate increase in carbon monoxide emission with essentially unchanged unburned hydrocarbons emission. Increase in fuel consumption was attributed to lesser heating value of bio diesel and partially to decreased fuel conversion efficiency. Analysis of combustion characteristics revealed earlier start of injection and shorter ignition delay period of bio diesel. Resulting decrease in maximum rate of heat release and cylinder pressure was the most probable reason for reduced emission of nitrogen oxides. Analysis of combustion characteristics also showed that cetane index determined by ASTM Method D976 is not a proper measure of ignition quality of bio diesel. Conclusion was made on applicability of mustard oil as a source for commercial production of bio diesel in Pakistan. Potentialities of on improving combustion and emissions characteristics of diesel engine by reformulating bio diesel were discussed. (author)

  14. How Well Does BODIPY-Cholesteryl Ester Mimic Unlabeled Cholesteryl Esters in High Density Lipoprotein Particles?

    DEFF Research Database (Denmark)

    Karilainen, Topi; Vuorela, Timo; Vattulainen, Ilpo

    2015-01-01

    the partitioning of CE between HDL and the water phase. However, BODIPY-CE was observed to diffuse more slowly and locate itself closer to the HDL-water interface than CE due to the BODIPY probe that is constrained to the surface region, and because the CE body in BODIPY-CE prefers to align itself......We compare the behavior of unlabeled and BODIPY-labeled cholesteryl ester (CE) in high density lipoprotein by atomistic molecular dynamics simulations. We find through replica exchange umbrella sampling and unbiased molecular dynamics simulations that BODIPY labeling has no significant effect on...

  15. Determination of Mass Spectrometric Sensitivity of Different Metalloporphyrin Esters Relative to Porphyrin Ester

    DEFF Research Database (Denmark)

    Larsen, Elfinn; Egsgaard, Helge; Møller, J.; With, T. K.

    1977-01-01

    Quantitative determination of metalloporphyrin contamination in preparations of biologically important porphyrins was achieved mass spectrometrically by application of the integrated ion current technique. For this purpose, the relative molecular ion sensitivities of the contaminating metal compl...... complexes were determined from the ratios of the integrated molecular ion currents of a series of calibration samples containing a porphyrin ester and one of its metal complexes in known molar ratio. Complexes formed with divalent ions of Cu, Zn, Fe, Co and Ni of copro- as well as uro...

  16. The micromethod for determination of cholesterol, cholesteryl esters and phospholipids

    Directory of Open Access Journals (Sweden)

    Okabe,Akinobu

    1974-12-01

    Full Text Available We examined the method for determining microquantities of lipids, including cholesterol, cholesteryl esters and phospholipids. A standard colorimetric procedure of cholesteryl esters was modified to accommodate a quantitative thin-layer chromatography. This method involved the following steps. (1 Separation of lipids by a thin-layer chromatography: Lipids were applied to Silica gel G plates. Plates were developed with petroleum ether-diethyl etheracetic acid (82: 18: 2, vIvIv. (2 Elution of cholesterol and its esters from scraped silica gel: After scraping the silica gel with adhered cholesterol and its esters, they were eluted with chloroform-methanol (4: 1, v,tv. In the case of phspholipids, the silica gel was calcified. (3 Colorimetric determination of the lipids: Cholesterol and its esters eluted from the silica gel were determined by the method of ZAK with ROSENTHAL'S color reagent directly and after saponification, respectively. Phospholipids were calculated from the phosphorous content determined by the method of KATES. On the basis of examination of recovery and analyses of lipids extracted from tissue, it was concluded that this method permitted a reliable estimation of microquantities of cholesterol, its esters and phospholipids from small amounts of biological materials.

  17. Strategies for the analysis of highly reactive pinacolboronate esters.

    Science.gov (United States)

    Zhong, Qiqing; Ngim, Kenley K; Sun, Megan; Li, Jane; Deese, Alan; Chetwyn, Nik P

    2012-03-16

    Pinacolboronate esters (or boronic acid, pinacol esters) are widely used in the Suzuki coupling reaction to connect organic building blocks for the total synthesis of complex molecules. The 2-aminopyrimidine-5-pinacolboronate ester was used as a starting material in the synthesis of a development compound, necessitating a chromatographic purity method to assess its quality. This aryl pinacolboronate ester posed unique analytical challenges due to its facile hydrolysis to the corresponding boronic acid, which is nonvolatile and poorly soluble in organic solvents. This made GC and normal-phase HPLC analysis unsuitable. In reversed-phase mode, typical sample preparation and analysis conditions promoted rapid sample degradation to the boronic acid. To overcome these challenges, unconventional approaches were necessary in order to stabilize 2-aminopyrimidine-5-pinacolboronate ester, adequately solubilize its boronic acid, and produce acceptable separation and retention. The final method employed non-aqueous and aprotic diluent, and a reversed-phase separation using highly basic mobile phases (pH 12.4) with an ion pairing reagent. These strategies were successfully applied to several other reactive pinacolboronate esters for purity analysis, demonstrating broad applicability to this unique class of compounds. PMID:22321949

  18. Cellulose-reinforced composites: from micro-to nanoscale

    Directory of Open Access Journals (Sweden)

    Alain Dufresne

    2013-01-01

    Full Text Available This paper present the most relevant advances in the fields of: i cellulose fibres surface modification; ii cellulose fibres-based composite materials; and iii nanocomposites based on cellulose whiskers or starch platelet-like nanoparticles. The real breakthroughs achieved in the first topic concern the use of solvent-free grafting process (plasma and the grafting of the matrix at the surface of cellulose fibres through isocyanate-mediated grafting or thanks to "click chemistry". Concerning the second topic, it is worth to mention that for some cellulose/matrix combination and in the presence of adequate aids or specific surface treatment, high performance composite materials could be obtained. Finally, nanocomposites allow using the semi-crystalline nature and hierarchical structure of lignocellulosic fibres and starch granules to more deeply achieve this goal profitably exploited by Mother Nature

  19. Loosening Xyloglucan Accelerates the Enzymatic Degradation of Cellulose in Wood

    Institute of Scientific and Technical Information of China (English)

    Rumi Kaida; Tomomi Kaku; Kei'ichi Baba; Masafumi Oyadomari; Takashi Watanabe; Koji Nishida; Toshiji Kanaya; Ziv Shani; Oded Shoseyov; Takahisa Hayashi

    2009-01-01

    In order to create trees in which cellulose, the most abundant component in biomass, can be enzymatically hydrolyzed highly for the production of bioethanol, we examined the saccharification of xylem from several transgenic poplars, each overexpressing either xyloglucanase, cellulase, xylanase, or galactanase. The level of cellulose degradation achieved by a cellulase preparation was markedly greater in the xylem overexpressing xyloglucanase and much greater in the xylems overexpressing xylanase and cellulase than in the xylem of the wild-type plant. Although a high degree of degradation occurred in all xylems at all loci, the crystalline region of the cellulose microfibrUs was highly degraded in the xylem overexpressing xyloglucanase. Since the complex between microfibrils and xyloglucans could be one region that is particularly resistant to cellulose degradation, loosening xyloglucan could facilitate the enzymatic hydrolysis of cellulose in wood.

  20. In-situ glyoxalization during biosynthesis of bacterial cellulose.

    Science.gov (United States)

    Castro, Cristina; Cordeiro, Nereida; Faria, Marisa; Zuluaga, Robin; Putaux, Jean-Luc; Filpponen, Ilari; Velez, Lina; Rojas, Orlando J; Gañán, Piedad

    2015-08-01

    A novel method to synthesize highly crosslinked bacterial cellulose (BC) is reported. The glyoxalization is started in-situ, in the culture medium during biosynthesis of cellulose by Gluconacetobacter medellensis bacteria. Strong crosslinked networks were formed in the contact areas between extruded cellulose ribbons by reaction with the glyoxal precursors. The crystalline structure of cellulose was preserved while the acidic component of the surface energy was reduced. As a consequence, its predominant acidic character and the relative contribution of the dispersive component increased, endowing the BC network with a higher hydrophobicity. This route for in-situ crosslinking is expected to facilitate other modifications upon biosynthesis of cellulose ribbons by microorganisms and to engineer the strength and surface energy of their networks. PMID:25933519

  1. The Solubility of Natural Cellulose After DBD Plasma Treatment

    Institute of Scientific and Technical Information of China (English)

    WU Jun; ZENG Fengcai; CHEN Bingqiang

    2008-01-01

    Natural cellulose was treated by an atmospheric DBD plasma. The solubility of cel-lulose in a diluted alkaline solution after the plasma treatment was investigated. The properties were characterized by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spec-troscopy (FTIR) and scanning electron microscopy (SEM). The results indicated that the surface of cellulose treated by the argon DBD plasma was significantly etched, and the relevant force of hy-drogen bonding was decreased. This might be the essential reason for the solubility improvement of natural cellulose in the diluted alkaline solution. Through a comparison of two discharge modes, the atmospheric DBD plasma gun and the parallel plate capacitively coupled DBD plasma, it wasfound that the atmospheric DBD plasma gun was more effective in fragmentizing the cellulose due to its production of a high energy plasma based on its special structure [6] .

  2. Cellulose nanocrystals isolated from oil palm trunk.

    Science.gov (United States)

    Lamaming, Junidah; Hashim, Rokiah; Sulaiman, Othman; Leh, Cheu Peng; Sugimoto, Tomoko; Nordin, Noor Afeefah

    2015-01-01

    In this study cellulose nanocrystals were isolated from oil palm trunk (Elaeis guineensis) using acid hydrolysis method. The morphology and size of the nanocrystals were characterized using scanning electron microscopy and transmission electron microscopy. The results showed that the nanocrystals isolated from raw oil palm trunk (OPT) fibers and hot water treated OPT fibers had an average diameter of 7.67 nm and 7.97 nm and length of 397.03 nm and 361.70 nm, respectively. Fourier Transform Infrared spectroscopy indicated that lignin and hemicellulose contents decreased. It seems that lignin was completely removed from the samples during chemical treatment. Thermogravimetric analysis demonstrated that cellulose nanocrystals after acid hydrolysis had higher thermal stability compared to the raw and hot water treated OPT fibers. The X-ray diffraction analysis increased crystallinity of the samples due to chemical treatment. The crystalline nature of the isolated nanocrystals from raw and hot water treated OPT ranged from 68 to 70%. PMID:25965475

  3. Anaerobic digestion of cellulosic wastes: laboratory tests

    International Nuclear Information System (INIS)

    Anaerobic digestion is a potentially attractive technology for volume reduction of cellulosic wastes. A substantial fraction of the waste is converted to off-gas and a relatively small volume of biologically stabilized sludge is produced. Process development work is underway using a 75-L digester to verify rates and conversions obtained at the bench scale, to develop start-up and operating procedures, and to generate effluent for characterization and disposal studies. Three runs using batch and batch-fed conditions have been made lasting 36, 90, and over 200 days. Solids solubilization and gas production rates and total solids destruction have met or exceeded the target values of 0.6 g cellulose per L of reactor per day, 0.5 L off-gas per L of reactor per day, and 80% destruction of solids, respectively. Successful start-up procedures have been developed, and preliminary effluent characterization and disposal studies have been done. A simple dynamic process model has been constructed to aid in further process development and for use in process monitoring and control of a large-scale digester. 10 references, 17 figures, 4 tables

  4. Radiation induced crosslinking of cellulose ethers

    International Nuclear Information System (INIS)

    The effects of high-energy radiation on four ethers of cellulose: carboxymethyl (CMC); hydroxypropyl (HPC), hydroxyethyl (HEC) and methylcellulose (MC) were investigated. Polymers are irradiated in solid state and in aqueous solutions at various concentrations. Degree of substitution (DS) of the derivatives, the concentration of their aqueous solutions and irradiation conditions had a significant impact on the obtained products. Irradiation of polymers in solid state and in diluted aqueous solutions resulted in their degradation. However, it was found that for concentrated solutions gel formation occurred. Paste-like form of the initial material, when water plasticizes the bulk of polymer as well as the high dose rate, what prevents oxygen penetration of the polymer during irradiation, have been found favourable for hydrogel formation. Up to 95% of gel fraction was obtained from solutions of CMC with concentration over 50% irradiated by γ-rays or electron beam. It was pointed out that the ability to the formation of the three-dimensional network is related to the DS of anhydroglucose units and a type of chemical group introduced to main chain of cellulose. Produced hydrogels swelled markedly in water. Despite of the crosslinked structure they underwent degradation by the action of cellulase enzyme or microorganisms from compost, and can be included into the group of biodegradable materials. (author)

  5. CELLULOSE DECOMPOSTION IN TROPICAL PEAT SWAMPS

    Institute of Scientific and Technical Information of China (English)

    Hjh Dulima Jali

    2003-01-01

    Given that organic soil is a complex substrate and there are many environmental factors which directly or indirectly control its decomposition processes, the use of standard substrate simplify the system in that the effect of substrate quality could be eliminated and influence of certain environmental conditions such as edaphic factors, acidity and moisture could be focused on. In addition to the forest floor, decomposition potential down the peat profile can also be examined. Cotton strip assay was used to estimate decomposition potentials in tropical peat swamp occupied by different Shorea Albida peat swamp forest communities, The' Alan Batu' , the ' Alan Bunga' , the' Alan Padang' and the 'mixed Alan'forest communities. Greatest decay rates on the peat surface took place during the wet period. The moist condition of the wet months appeared to favour the growth and stimulate activities of decomposer population and soil invertebrates.Generally, 50% of cotton tensile loss is achieved after four weeks of exposure. The results suggest that cellulose decomposition is influenced by the environmental variables of hydrological regime, water-table fluctuation, aeration, moisture availability,waterlogging and the resultant anaerobiosis, peat depths, and micro-sites characteristics. Decomposition of cellulose is inhibited by waterlogging and the resultant anaerobiosis in thelower segment of the cotton strip during wet periods and under dry conditions in the surface segment of the cotton strip during periods of less rain.

  6. Atomic force microscopy characterization of cellulose nanocrystals.

    Science.gov (United States)

    Lahiji, Roya R; Xu, Xin; Reifenberger, Ronald; Raman, Arvind; Rudie, Alan; Moon, Robert J

    2010-03-16

    Cellulose nanocrystals (CNCs) are gaining interest as a "green" nanomaterial with superior mechanical and chemical properties for high-performance nanocomposite materials; however, there is a lack of accurate material property characterization of individual CNCs. Here, a detailed study of the topography, elastic and adhesive properties of individual wood-derived CNCs is performed using atomic force microscopy (AFM). AFM experiments involving high-resolution dynamic mode imaging and jump-mode measurements were performed on individual CNCs under ambient conditions with 30% relative humidity (RH) and under a N(2) atmosphere with 0.1% RH. A procedure was also developed to calculate the CNC transverse elastic modulus (E(T)) by comparing the experimental force-distance curves measured on the CNCs with 3D finite element calculations of tip indentation on the CNC. The E(T) of an isolated CNC was estimated to be between 18 and 50 GPa at 0.1% RH; however, the associated crystallographic orientation of the CNC could not be determined. CNC properties were reasonably uniform along the entire CNC length, despite variations along the axis of 3-8 nm in CNC height. The range of RH used in this study was found to have a minimal effect on the CNC geometry, confirming the resistance of the cellulose crystals to water penetration. CNC flexibility was also investigated by using the AFM tip as a nanomanipulator. PMID:20055370

  7. Ester Tuiksoo võitleb viina puhtuse eest / Ester Tuiksoo ; interv. Silja Lättemäe

    Index Scriptorium Estoniae

    Tuiksoo, Ester, 1965-

    2006-01-01

    Põllumajandusminister Ester Tuiksoo lubab Euroopa Liidu piiritusjookide määruse eelnõu arutusel kaitsta seisukohta, et viinaks tuleb pidada üksnes teraviljast või kartulist valmistatud piiritusjooki

  8. Cellulose-hemicellulose interaction in wood secondary cell-wall

    Science.gov (United States)

    Zhang, Ning; Li, Shi; Xiong, Liming; Hong, Yu; Chen, Youping

    2015-12-01

    The wood cell wall features a tough and relatively rigid fiber reinforced composite structure. It acts as a pressure vessel, offering protection against mechanical stress. Cellulose microfibrils, hemicellulose and amorphous lignin are the three major components of wood. The structure of secondary cell wall could be imagined as the same as reinforced concrete, in which cellulose microfibrils acts as reinforcing steel bar and hemicellulose-lignin matrices act as the concrete. Therefore, the interface between cellulose and hemicellulose/lignin plays a significant role in determine the mechanical behavior of wood secondary cell wall. To this end, we present a molecular dynamics (MD) simulation study attempting to quantify the strength of the interface between cellulose microfibrils and hemicellulose. Since hemicellulose binds with adjacent cellulose microfibrils in various patterns, the atomistic models of hemicellulose-cellulose composites with three typical binding modes, i.e. bridge, loop and random binding modes are constructed. The effect of the shape of hemicellulose chain on the strength of hemicellulose-cellulose composites under shear loadings is investigated. The contact area as well as hydrogen bonds between cellulose and hemicellulose, together with the covalent bonds in backbone of hemicellulose chain are found to be the controlling parameters which determine the strength of the interfaces in the composite system. For the bridge binding model, the effect of shear loading direction on the strength of the cellulose material is also studied. The obtained results suggest that the shear strength of wood-inspired engineering composites can be optimized through maximizing the formations of the contributing hydrogen bonds between cellulose and hemicellulose.

  9. Immobilization of Glucose Oxidase on Cellulose/Cellulose Acetate Membrane and its Detection by Scanning Electrochemical Microscope (SECM)

    Institute of Scientific and Technical Information of China (English)

    Jin Sheng ZHAO; Zhen Yu YANG; Yi He ZHANG; Zheng Yu YANG

    2004-01-01

    Cellulose/cellulose acetate membranes were prepared and functionalized by introducing amino group on it, and then immobilized the glucose oxidase (Gox) on the functionalizd membrane. SECM was applied for the detection of enzyme activity immobilized on the membrane. Immobilized biomolecules on such membranes was combined with analysis apparatus and can be used in bioassays.

  10. Preparation of cellulose II and III{sub I} films by allomorphic conversion of bacterial cellulose I pellicles

    Energy Technology Data Exchange (ETDEWEB)

    Faria-Tischer, Paula C.S., E-mail: paula.tischer@pq.cnpq.br [BioPol, Departamento de Química, UFPR, Cx. Postal 19081, 81531-980 Curitiba, PR (Brazil); Université Grenoble Alpes, Centre de Recherches sur les Macromolécules Végétales (CERMAV), F-38000 Grenoble (France); CNRS, CERMAV, F-38000 Grenoble (France); UMR 5628 (LMGP), CNRS and Grenoble Institute of Technology, 3 Parvis Louis Néel, F-38016 Grenoble Cedex 1 (France); Tischer, Cesar A. [BioPol, Departamento de Química, UFPR, Cx. Postal 19081, 81531-980 Curitiba, PR (Brazil); Université Grenoble Alpes, Centre de Recherches sur les Macromolécules Végétales (CERMAV), F-38000 Grenoble (France); CNRS, CERMAV, F-38000 Grenoble (France); CIME Nanotech, 3 Parvis Louis Néel, F-38016 Grenoble Cedex 1 (France); Heux, Laurent [Université Grenoble Alpes, Centre de Recherches sur les Macromolécules Végétales (CERMAV), F-38000 Grenoble (France); CNRS, CERMAV, F-38000 Grenoble (France); Le Denmat, Simon; Picart, Catherine [UMR 5628 (LMGP), CNRS and Grenoble Institute of Technology, 3 Parvis Louis Néel, F-38016 Grenoble Cedex 1 (France); Sierakowski, Maria-R. [BioPol, Departamento de Química, UFPR, Cx. Postal 19081, 81531-980 Curitiba, PR (Brazil); and others

    2015-06-01

    The structural changes resulting from the conversion of native cellulose I (Cel I) into allomorphs II (Cel II) and III{sub I} (Cel III{sub I}) have usually been studied using powder samples from plant or algal cellulose. In this work, the conversion of Cel I into Cel II and Cel III{sub I} was performed on bacterial cellulose films without any mechanical disruption. The surface texture of the films was observed by atomic force microscopy (AFM) and the morphology of the constituting cellulose ribbons, by transmission electron microscopy (TEM). The structural changes were characterized using solid-state NMR spectroscopy as well as X-ray and electron diffraction. The allomorphic change into Cel II and Cel III{sub I} resulted in films with different crystallinity, roughness and hydrophobic/hydrophilicity surface and the films remained intact during all process of allomorphic conversion. - Highlights: • Description of a method to modify the allomorphic structure of bacterial cellulose films • Preparation of films with specific morphologies and hydrophobic/hydrophilic surface characters • First report on cellulose III films from bacterial cellulose under swelling conditions • Detailed characterization of cellulose II and III films with complementary techniques • Development of films with specific properties as potential support for cells, enzymes, and drugs.

  11. Tunable Semicrystalline Thin Film Cellulose Substrate for High-Resolution, In-Situ AFM Characterization of Enzymatic Cellulose Degradation.

    Science.gov (United States)

    Ganner, Thomas; Roŝker, Stephanie; Eibinger, Manuel; Kraxner, Johanna; Sattelkow, Jürgen; Rattenberger, Johannes; Fitzek, Harald; Chernev, Boril; Grogger, Werner; Nidetzky, Bernd; Plank, Harald

    2015-12-23

    In the field of enzymatic cellulose degradation, fundamental interactions between different enzymes and polymorphic cellulose materials are of essential importance but still not understood in full detail. One technology with the potential of direct visualization of such bioprocesses is atomic force microscopy (AFM) due to its capability of real-time in situ investigations with spatial resolutions down to the molecular scale. To exploit the full capabilities of this technology and unravel fundamental enzyme-cellulose bioprocesses, appropriate cellulose substrates are decisive. In this study, we introduce a semicrystalline-thin-film-cellulose (SCFTC) substrate which fulfills the strong demands on such ideal cellulose substrates by means of (1) tunable polymorphism via variable contents of homogeneously sized cellulose nanocrystals embedded in an amorphous cellulose matrix; (2) nanoflat surface topology for high-resolution and high-speed AFM; and (3) fast, simple, and reproducible fabrication. The study starts with a detailed description of SCTFC preparation protocols including an in-depth material characterization. In the second part, we demonstrate the suitability of SCTFC substrates for enzymatic degradation studies by combined, individual, and sequential exposure to TrCel6A/TrCel7A cellulases (Trichoderma reesei) to visualize synergistic effects down to the nanoscale. PMID:26618709

  12. Superhydrophobic and highly luminescent polyfluorene/silica hybrid coatings deposited onto glass and cellulose-based substrates.

    Science.gov (United States)

    de Francisco, Raquel; Hoyos, Mario; García, Nuria; Tiemblo, Pilar

    2015-03-31

    Neat poly(9,9-dioctyl-9H-fluorene) (PFO) and composites of PFO and a modified organonanosilica P(7) at weight ratios 90/10, 70/30, and 50/50 have been employed to prepare fluorescent and superhydrophobic coatings by spraying onto three different substrates: glass, Whatman paper, and a filtration membrane of mixed cellulose esters. The water repellency of the coatings and their photophysical properties are therein studied. It is found that, irrespective of the substrate and the composite composition, all coatings remain fluorescent. In some of the coatings prepared, confined morphologies are created, which fluoresce with a wavelength distribution resembling that of an ordered planar β-phase. Among the coatings prepared in this work, those with a ratio PFO/P(7) of 50/50 are the ones with the strongest chain confinement and the highest surface roughness, being highly emissive at the β-phase wavelengths and also superhydrophobic. Depending on the substrate these materials are also tough and flexible (cellulose based substrates) or display a remarkable light transmittance (glass). A final merit of these multifunctional materials is the simplicity of the preparation procedure, adequate for large surfaces and industrial applications. PMID:25747277

  13. Lubricating and Waxy Esters. VI. Effect of Symmetry about Ester on Crystallization of Linear Monoester Isomers

    Directory of Open Access Journals (Sweden)

    Laziz Bouzidi

    2014-08-01

    Full Text Available The crystal structure development of jojoba-like esters incorporating either 1-decenoic acid and/or 1-decenol, namely octadec-9-enyl dec-9-enoate (JLE-281, and its isomer dec-9-enyl oleate (JLE-282 was investigated to reveal the effect of symmetry about the ester group on crystallization of aliphatic fatty monoesters. The phase transformation path was investigated with temperature-time resolved X-ray diffraction during stepped isothermal crystallization, and while cooling from the melt at a fixed rate. Startling differences in phase behavior were uncovered between the isomers. When stepped isothermals were used, selective extinctions occurred at a transition temperature for JLE-281 but not for JLE-282. The extinctions, which are due to dramatic changes in the electronic density of certain families of planes, indicate a phase transition attributed to a brusque rearrangement of the oxygen atoms in the crystal subcell. The phase transition did not occur when the JLEs were cooled continuously. The crucial role played by the position of the alkyl chain and its orientation relative to the easy rotation site of the C–O bond in the phase trajectories of the JLEs was particularly highlighted.

  14. Rape oil methyl ester (RME) and used cooking oil methyl ester (UOME) as alternative fuels

    Energy Technology Data Exchange (ETDEWEB)

    Hohl, G.H. [Military Technology Agency, Vienna (Austria)

    1995-12-31

    The author presents a review about the fleet tests carried out by the Austrian Armed Forces concerning the practical application of a vegetable oil, i.e Rape Oil Methyl Ester (RME) and Used Cooking Oil Methyl Ester (UOME) as alternative fuels for vehicles under military conditions, and reviews other research results carried out in Austria. As a result of over-production in Western European agriculture, the increase in crop yields has led to tremendous surpluses. Alternative agricultural products have been sought. One alternative can be seen in biological fuel production for tractors, whereby the farmer is able to produce his own fuel supply as was the case when he previously provided self-made feed for his horses. For the market introduction different activities were necessary. A considerable number of institutes and organizations including the Austrian Armed Forces have investigated, tested and developed these alternative fuels. The increasing disposal problems of used cooking oil have initiated considerations for its use. The recycling of this otherwise waste product, and its preparation for use as an alternative fuel to diesel oil, seems to be most promising.

  15. Studies on novel interpenetrating networks of urethane modified poly(ester-amide and vinyl ester of bisphenol-C

    Directory of Open Access Journals (Sweden)

    Pragnesh N. Dave

    2016-05-01

    Full Text Available Bisphthalamic acids were prepared by reaction of maleic anhydride and aromatic diamines. Novel poly(ester-amides (PEAs were prepared by reaction of DGEBF with bisphthalamic acids. Acrylation of PEAs was carried out using acryloyl chloride; products are called acrylated poly(ester-amides (APEAs. Epoxy resin based unsaturated poly(ester-amide resins (UPEAs can be prepared by many methods but here these were prepared by reported method. These UPEAs were then treated with acryloyl chloride to afford acrylated UPEAs resin (i.e. AUPEAs. Interpenetrating networks of equal proportional urethane modified poly(ester-amide and acrylated poly(ester-amide and vinyl ester of biaphenol c (VE resin were prepared. Urethane modified APEAs and AUPEAs were characterized by elemental analysis, molecular weight was determined by vapor pressure osmometer and by IR spectral study and by thermogravimetry. Based on DSC data in situ glass reinforced composites of the resultant blends have been prepared and characterized for mechanical, electrical and chemical properties. Unreinforced blends were characterized by thermogravimetry (TGA.

  16. Optimization of cellulose acrylate and grafted 4-vinylpyridine and 1-vinylimidazole synthesis

    Directory of Open Access Journals (Sweden)

    Bojanić Vaso

    2010-01-01

    Full Text Available Optimization of cellulose acrylate synthesis by reaction with sodium cellulosate and acryloyl chloride was carried out. Optimal conditions for conducting the synthesis reaction of cellulose acrylate were as follows: the molar ratio of cellulose/potassium-t-butoxide/acryloyl chloride was 1:3:10 and the optimal reaction time was 10 h. On the basis of elemental analysis with optimal conditions for conducting the reaction of cellulose acrylate, the percentage of substitution of glucose units in cellulose Y = 80.7%, and the degree of substitution of cellulose acrylate DS = 2.4 was determined. The grafting reaction of acrylate vinyl monomers onto cellulose in acetonitrile with initiator azoisobutyronitrile (AIBN in a nitrogen atmosphere was performed, by mixing for 5 h at acetonitrile boiling temperature. Radical copolymerization of synthesized cellulose acrylate and 4-vinylpyridine, 1-vinylimidazole, 1-vinyl-2-pyrrolidinone and 9-vinylcarbazole, cellulose-poly-4-vinylpyridine (Cell-PVP, cellulose-poly-1- vinylimidazole (Cell-PVIm and cellulose-poly-1-vinyl-2-pyrrolidinone (Cell-P1V2P and cellulose-poly-9-vinylcarbazole (Cell-P9VK were synthesized. Acrylate cellulose and cellulose grafted copolymers were confirmed by IR spectroscopy, based on elementary analysis and the characteristics of grafted copolymers of cellulose were determined. The mass share of grafted copolymers, X, the relationship of derivative parts/cellulose vinyl group, Z, and the degree of grafting copolymers of cellulose (mass% were determined. In reaction of methyl iodide and cellulose-poly-4-vinylpyridine (Cell-PVP the cellulose-1-methyl-poly-4-vinylpyridine iodide (Cell-1-Me-PVPJ was synthesized. Cellulose acrylate and grafted copolymers were obtained with better thermal, electrochemical and ion-emulation properties for bonding of noble metals Au, Pt, Pd from water solutions. The synthesis optimization of cellulose acrylate was applied as a model for the synthesis of grafted

  17. Sorption of organophosphate esters by carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Wei; Yan, Li [State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China); Duan, Jinming [School of Environmental and Municipal Engineering, Xi’an University of Architecture and Technology, Xi’an 710055 (China); Jing, Chuanyong, E-mail: cyjing@rcees.ac.cn [State Key Laboratory of Environmental Chemistry and Ecotoxicology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences, Beijing 100085 (China)

    2014-05-01

    Graphical abstract: The interfacial interactions between the OPE molecules and CNTs. - Highlights: • Oxygen-containing groups on CNTs change the sorption property for OPEs. • Molecular configuration of OPEs has insignificant impact on their sorption. • Hydrophobic, π–π EDA and Brønsted acid–base interaction occurred between the CNTs and OPEs. - Abstract: Insights from the molecular-level mechanism of sorption of organophosphate esters (OPEs) on carbon nanotubes (CNTs) can further our understanding of the fate and transport of OPEs in the environment. The motivation for our study was to explore the sorption process of OPEs on multi-walled CNTs (MWCNTs), single-walled CNTs (SWCNTs) and their oxidized counterparts (O-MWCNTs and O-SWCNTs), and its molecular mechanism over a wide concentration range. The sorption isotherm results revealed that the hydrophobicity of OPEs dominated their affinities on a given CNT and the π–π electron donor–acceptor (EDA) interaction also played an important role in the sorption of aromatic OPEs. This π–π EDA interaction, verified with Raman and FT-IR spectroscopy, could restrict the radial vibration of SWCNTs and affect the deformation vibration γ(CH) bands of OPE molecules. The OPE surface coverage on CNTs, estimated using the nonlinear Dubinin–Ashtakhov model, indicated that the oxygen-containing functional groups on CNTs could interact with water molecules by H-bonding, resulting in a decrease in effective sorption sites. In addition, FTIR analysis also confirmed the occurrence of Brønsted acid–base interactions between OPEs and surface OH groups of SWCNTs. Our results should provide mechanistic insights into the sorption mechanism of OPE contaminants on CNTs.

  18. Biochemical Disincentives to Fertilizing Cellulosic Ethanol Crops

    Science.gov (United States)

    Gallagher, M. E.; Hockaday, W. C.; Snapp, S.; McSwiney, C.; Baldock, J.

    2010-12-01

    Corn grain biofuel crops produce the highest yields when the cropping ecosystem is not nitrogen (N)-limited, achieved by application of fertilizer. There are environmental consequences for excessive fertilizer application to crops, including greenhouse gas emissions, hypoxic “dead zones,” and health problems from N runoff into groundwater. The increase in corn acreage in response to demand for alternative fuels (i.e. ethanol) could exacerbate these problems, and divert food supplies to fuel production. A potential substitute for grain ethanol that could reduce some of these impacts is cellulosic ethanol. Cellulosic ethanol feedstocks include grasses (switchgrass), hardwoods, and crop residues (e.g. corn stover, wheat straw). It has been assumed that these feedstocks will require similar N fertilization rates to grain biofuel crops to maximize yields, but carbohydrate yield versus N application has not previously been monitored. We report the biochemical stocks (carbohydrate, protein, and lignin in Mg ha-1) of a corn ecosystem grown under varying N levels. We measured biochemical yield in Mg ha-1 within the grain, leaf and stem, and reproductive parts of corn plants grown at seven N fertilization rates (0-202 kg N ha-1), to evaluate the quantity and quality of these feedstocks across a N fertilization gradient. The N fertilization rate study was performed at the Kellogg Biological Station-Long Term Ecological Research Site (KBS-LTER) in Michigan. Biochemical stocks were measured using 13C nuclear magnetic resonance spectroscopy (NMR), combined with a molecular mixing model (Baldock et al. 2004). Carbohydrate and lignin are the main biochemicals of interest in ethanol production since carbohydrate is the ethanol feedstock, and lignin hinders the carbohydrate to ethanol conversion process. We show that corn residue carbohydrate yields respond only weakly to N fertilization compared to grain. Grain carbohydrate yields plateau in response to fertilization at

  19. Water dispersible microbicidal cellulose acetate phthalate film

    Directory of Open Access Journals (Sweden)

    Li Yun-Yao

    2003-11-01

    Full Text Available Abstract Background Cellulose acetate phthalate (CAP has been used for several decades in the pharmaceutical industry for enteric film coating of oral tablets and capsules. Micronized CAP, available commercially as "Aquateric" and containing additional ingredients required for micronization, used for tablet coating from water dispersions, was shown to adsorb and inactivate the human immunodeficiency virus (HIV-1, herpesviruses (HSV and other sexually transmitted disease (STD pathogens. Earlier studies indicate that a gel formulation of micronized CAP has a potential as a topical microbicide for prevention of STDs including the acquired immunodeficiency syndrome (AIDS. The objective of endeavors described here was to develop a water dispersible CAP film amenable to inexpensive industrial mass production. Methods CAP and hydroxypropyl cellulose (HPC were dissolved in different organic solvent mixtures, poured into dishes, and the solvents evaporated. Graded quantities of a resulting selected film were mixed for 5 min at 37°C with HIV-1, HSV and other STD pathogens, respectively. Residual infectivity of the treated viruses and bacteria was determined. Results The prerequisites for producing CAP films which are soft, flexible and dispersible in water, resulting in smooth gels, are combining CAP with HPC (other cellulose derivatives are unsuitable, and casting from organic solvent mixtures containing ≈50 to ≈65% ethanol (EtOH. The films are ≈100 µ thick and have a textured surface with alternating protrusions and depressions revealed by scanning electron microscopy. The films, before complete conversion into a gel, rapidly inactivated HIV-1 and HSV and reduced the infectivity of non-viral STD pathogens >1,000-fold. Conclusions Soft pliable CAP-HPC composite films can be generated by casting from organic solvent mixtures containing EtOH. The films rapidly reduce the infectivity of several STD pathogens, including HIV-1. They are converted into

  20. Interfacial Properties of Ethyl Cellulose/Cellulose Acetate Blends by HPLC

    Institute of Scientific and Technical Information of China (English)

    GAO Su-lian; ZHOU Ning-guo; ZHANG Xiu-zhen; ZHANG Wei

    2007-01-01

    The high performance liquid chromatography method (HPLC) with ethyl cellulose/cellulose acetate (EC/CA)blends and EC as column packing material, and small molecular weight compound as probe molecules was employed to measure the retention volume (VR) and equilibrium distribution coefficient (K) of both inorganic and organic solutes. The interfacial separation properties of EC/CA blends were characterized by the HPLC data. The effects of the blends on the inteffacial adsorption properties, hydrophilicity, affinity, polar and non-polar parameters of EC membrane materials were studied subsequently. The research results indicate that the interfacial adsorption properties and hydrophilicity of EC have been improved by solution blending with CA. The alloys are superior to EC in the separation efficiency for non-dissociable polar organic solute. The EC/CA alloy (80:20, ω) is suitable for desalting and desaccharifying.

  1. Optimization of upstream and development of cellulose hydrolysis process for cellulosic bio-ethanol production

    International Nuclear Information System (INIS)

    The purpose of this project is optimization of upstream and development of cellulose hydrolysis process for cellulosic bio-ethanol production. The 2nd year Research scope includes: 1) Optimization of pre-treatment conditions for enzymatic hydrolysis of lignocellulosic biomass and 2) Demonstration of enzymatic hydrolysis by recombinant enzymes. To optimize the pretreatment, we applied two processes: a wet process (wet milling + popping), and dry process (popping + dry milling). Out of these, the wet process presented the best glucose yield with a 93.1% conversion, while the dry process yielded 69.6%, and the unpretreated process yielded <20%. The recombinant cellulolytic enzymes showed very high specific activity, about 80-1000 times on CMC and 13-70 times on filter paper at pH 3.5 and 55 .deg. C

  2. Bacterial cellulose biosynthesis: diversity of operons, subunits, products, and functions.

    Science.gov (United States)

    Römling, Ute; Galperin, Michael Y

    2015-09-01

    Recent studies of bacterial cellulose biosynthesis, including structural characterization of a functional cellulose synthase complex, provided the first mechanistic insight into this fascinating process. In most studied bacteria, just two subunits, BcsA and BcsB, are necessary and sufficient for the formation of the polysaccharide chain in vitro. Other subunits - which differ among various taxa - affect the enzymatic activity and product yield in vivo by modulating (i) the expression of the biosynthesis apparatus, (ii) the export of the nascent β-D-glucan polymer to the cell surface, and (iii) the organization of cellulose fibers into a higher-order structure. These auxiliary subunits play key roles in determining the quantity and structure of resulting biofilms, which is particularly important for the interactions of bacteria with higher organisms - leading to rhizosphere colonization and modulating the virulence of cellulose-producing bacterial pathogens inside and outside of host cells. We review the organization of four principal types of cellulose synthase operon found in various bacterial genomes, identify additional bcs genes that encode components of the cellulose biosynthesis and secretion machinery, and propose a unified nomenclature for these genes and subunits. We also discuss the role of cellulose as a key component of biofilms and in the choice between acute infection and persistence in the host. PMID:26077867

  3. Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications

    Directory of Open Access Journals (Sweden)

    Alain Dufresne

    2010-12-01

    Full Text Available Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i hydrosoluble systems, (ii non-hydrosoluble systems, and (iii emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.

  4. Biological evaluation of nanosilver incorporated cellulose pulp for hygiene products.

    Science.gov (United States)

    Kavitha Sankar, P C; Ramakrishnan, Reshmi; Rosemary, M J

    2016-04-01

    Cellulose pulp has a visible market share in personal hygiene products such as sanitary napkins and baby diapers. However it offers good surface for growth of microorganisms. Huge amount of research is going on in developing hygiene products that do not initiate microbial growth. The objective of the present work is to produce antibacterial cellulose pulp by depositing silver nanopowder on the cellulose fiber. The silver nanoparticles used were of less than 100 nm in size and were characterised using transmission electron microscopy and X-ray powder diffraction studies. Antibacterial activity of the functionalized cellulose pulp was proved by JIS L 1902 method. The in-vitro cytotoxicity, in-vivo vaginal irritation and intracutaneous reactivity studies were done with silver nanopowder incorporated cellulose pulp for introducing a new value added product to the market. Cytotoxicity evaluation suggested that the silver nanoparticle incorporated cellulose pulp is non-cytotoxic. No irritation and skin sensitization were identified in animals tested with specific extracts prepared from the test material in the in-vivo experiments. The results indicated that the silver nanopowder incorporated cellulose pulp meets the requirements of the standard practices recommended for evaluating the biological reactivity and has good biocompatibility, hence can be classified as a safe hygiene product. PMID:26838891

  5. Enhanced cellulose degradation using cellulase-nanosphere complexes.

    Directory of Open Access Journals (Sweden)

    Craig Blanchette

    Full Text Available Enzyme catalyzed conversion of plant biomass to sugars is an inherently inefficient process, and one of the major factors limiting economical biofuel production. This is due to the physical barrier presented by polymers in plant cell walls, including semi-crystalline cellulose, to soluble enzyme accessibility. In contrast to the enzymes currently used in industry, bacterial cellulosomes organize cellulases and other proteins in a scaffold structure, and are highly efficient in degrading cellulose. To mimic this clustered assembly of enzymes, we conjugated cellulase obtained from Trichoderma viride to polystyrene nanospheres (cellulase:NS and tested the hydrolytic activity of this complex on cellulose substrates from purified and natural sources. Cellulase:NS and free cellulase were equally active on soluble carboxymethyl cellulose (CMC; however, the complexed enzyme displayed a higher affinity in its action on microcrystalline cellulose. Similarly, we found that the cellulase:NS complex was more efficient in degrading natural cellulose structures in the thickened walls of cultured wood cells. These results suggest that nanoparticle-bound enzymes can improve catalytic efficiency on physically intractable substrates. We discuss the potential for further enhancement of cellulose degradation by physically clustering combinations of different glycosyl hydrolase enzymes, and applications for using cellulase:NS complexes in biofuel production.

  6. Bacterial cellulose biosynthesis: diversity of operons, subunits, products and functions

    Science.gov (United States)

    Römling, Ute; Galperin, Michael Y.

    2015-01-01

    Summary Recent studies of bacterial cellulose biosynthesis, including structural characterization of a functional cellulose synthase complex, provided the first mechanistic insight into this fascinating process. In most studied bacteria, just two subunits, BcsA and BcsB, are necessary and sufficient for the formation of the polysaccharide chain in vitro. Other subunits – which differ among various taxa – affect the enzymatic activity and product yield in vivo by modulating expression of biosynthesis apparatus, export of the nascent β-D-glucan polymer to the cell surface, and the organization of cellulose fibers into a higher-order structure. These auxiliary subunits play key roles in determining the quantity and structure of the resulting biofilm, which is particularly important for interactions of bacteria with higher organisms that lead to rhizosphere colonization and modulate virulence of cellulose-producing bacterial pathogens inside and outside of host cells. Here we review the organization of four principal types of cellulose synthase operons found in various bacterial genomes, identify additional bcs genes that encode likely components of the cellulose biosynthesis and secretion machinery, and propose a unified nomenclature for these genes and subunits. We also discuss the role of cellulose as a key component of biofilms formed by a variety of free-living and pathogenic bacteria and, for the latter, in the choice between acute infection and persistence in the host. PMID:26077867

  7. Cellulose supplementation early in life ameliorates colitis in adult mice.

    Directory of Open Access Journals (Sweden)

    Dorottya Nagy-Szakal

    Full Text Available Decreased consumption of dietary fibers, such as cellulose, has been proposed to promote the emergence of inflammatory bowel diseases (IBD: Crohn disease [CD] and ulcerative colitis [UC] where intestinal microbes are recognized to play an etiologic role. However, it is not known if transient fiber consumption during critical developmental periods may prevent consecutive intestinal inflammation. The incidence of IBD peaks in young adulthood indicating that pediatric environmental exposures may be important in the etiology of this disease group. We studied the effects of transient dietary cellulose supplementation on dextran sulfate sodium (DSS colitis susceptibility during the pediatric period in mice. Cellulose supplementation stimulated substantial shifts in the colonic mucosal microbiome. Several bacterial taxa decreased in relative abundance (e.g., Coriobacteriaceae [p = 0.001], and other taxa increased in abundance (e.g., Peptostreptococcaceae [p = 0.008] and Clostridiaceae [p = 0.048]. Some of these shifts persisted for 10 days following the cessation of cellulose supplementation. The changes in the gut microbiome were associated with transient trophic and anticolitic effects 10 days following the cessation of a cellulose-enriched diet, but these changes diminished by 40 days following reversal to a low cellulose diet. These findings emphasize the transient protective effect of dietary cellulose in the mammalian large bowel and highlight the potential role of dietary fibers in amelioration of intestinal inflammation.

  8. Comparative Structural and Computational Analysis Supports Eighteen Cellulose Synthases in the Plant Cellulose Synthesis Complex.

    Science.gov (United States)

    Nixon, B Tracy; Mansouri, Katayoun; Singh, Abhishek; Du, Juan; Davis, Jonathan K; Lee, Jung-Goo; Slabaugh, Erin; Vandavasi, Venu Gopal; O'Neill, Hugh; Roberts, Eric M; Roberts, Alison W; Yingling, Yaroslava G; Haigler, Candace H

    2016-01-01

    A six-lobed membrane spanning cellulose synthesis complex (CSC) containing multiple cellulose synthase (CESA) glycosyltransferases mediates cellulose microfibril formation. The number of CESAs in the CSC has been debated for decades in light of changing estimates of the diameter of the smallest microfibril formed from the β-1,4 glucan chains synthesized by one CSC. We obtained more direct evidence through generating improved transmission electron microscopy (TEM) images and image averages of the rosette-type CSC, revealing the frequent triangularity and average cross-sectional area in the plasma membrane of its individual lobes. Trimeric oligomers of two alternative CESA computational models corresponded well with individual lobe geometry. A six-fold assembly of the trimeric computational oligomer had the lowest potential energy per monomer and was consistent with rosette CSC morphology. Negative stain TEM and image averaging showed the triangularity of a recombinant CESA cytosolic domain, consistent with previous modeling of its trimeric nature from small angle scattering (SAXS) data. Six trimeric SAXS models nearly filled the space below an average FF-TEM image of the rosette CSC. In summary, the multifaceted data support a rosette CSC with 18 CESAs that mediates the synthesis of a fundamental microfibril composed of 18 glucan chains. PMID:27345599

  9. CARS and SHG microscopy for the characterization of bacterial cellulose

    Science.gov (United States)

    Enejder, Annika; Brackmann, Christian; Bodin, Aase; Åkeson, Madeleine; Gatenholm, Paul

    2009-02-01

    We have developed a protocol employing dual-mode non-linear microscopy for the monitoring of the biosynthesis of bacterial cellulose at a single-fiber level, with the fundamental aim to achieve a product with material properties similar to those of human blood vessels. Grown in a tubular geometry it could then be used as a natural and biocompatible source of replacement tissue in conjunction with cardiovascular surgery. The bacteria (Acetobacter xylinum) were selectively visualized based on the CH2 vibration of its organic macromolecular contents by the Coherent Anti-Stokes Raman Scattering (CARS) process and, simultaneously, the non-centrosymmetrically ordered, birefringent cellulose fibers were depicted by the Second Harmonic Generation (SHG) process. This dual-channel detection approach allows the monitoring of cellulose-fiber formation in vivo and to determine the influence of e.g. different growth conditions on fiber thickness and orientation, their assembling into higher-order structures and overall network density. The bacterial and fiber distributions were monitored in a simple microscope cultivation chamber, as well as in samples harvested during the actual fermentation process of tubular cellulose grafts. The CARS and SHG co-localization images reveal that highest bacterial population densities can be observed in the surface regions of the cellulose tissue, where the primary growth presumably takes place. The cellulose network morphology was also compared with that of human arteries and veins, from which we conclude that the cellulose matrix is comparatively homogeneous in contrast to the wavy band-like supra-formations of collagen in the native tissue. This prompts for sophisticated fermentation methods by which tunnels and pores of appropriate sizes and shapes can be introduced in the cellulose network in a controllable way. With this protocol we hope to contribute to the fundamental knowledge required for optimal production of bioengineered cellulose

  10. Terahertz Properties of Cellulose Nanocrystals and Films

    Science.gov (United States)

    Carnio, B. N.; Ahvazi, B.; Elezzabi, A. Y.

    2016-03-01

    Terahertz (THz) radiation properties of cellulose nanocrystal (CNC) films, a CNC powder, and a dissolving pulp film are examined using THz time-domain spectroscopy. The relative permittivity (real component) of the CNC samples are found to vary between 1.78 and 3.81, over the frequency range of 0.2-1.5 THz, despite the fact that they are made from the same linear chain of glucose monomers. The results show that the permittivity is strongly dependent on the source from which the CNC glucose monomers are extracted, as well as on the drying process used. The THz loss tangent (0.043 < tan( δ) < 0.145), absorption coefficient (3.5 cm-1 < α < 63.7 cm-1), and growth-varying permittivity, combined with other appealing thermal and mechanical characteristic of CNC, make such material attractive for use in both passive and potential THz bandwidth electronic components.

  11. Engineering microporosity in bacterial cellulose scaffolds.

    Science.gov (United States)

    Bäckdahl, Henrik; Esguerra, Maricris; Delbro, Dick; Risberg, Bo; Gatenholm, Paul

    2008-08-01

    The scaffold is an essential component in tissue engineering. A novel method to prepare three-dimensional (3D) nanofibril network scaffolds with controlled microporosity has been developed. By placing paraffin wax and starch particles of various sizes in a growing culture of Acetobacter xylinum, bacterial cellulose scaffolds of different morphologies and interconnectivity were prepared. Paraffin particles were incorporated throughout the scaffold, while starch particles were found only in the outermost area of the resulting scaffold. The porogens were successfully removed after culture with bacteria and no residues were detected with electron spectroscopy for chemical analysis (ESCA) or Fourier transform infra-red spectroscopy (FT-IR). Resulting scaffolds were seeded with smooth muscle cells (SMCs) and investigated using histology and organ bath techniques. SMC were selected as the cell type since the main purpose of the resulting scaffolds is for tissue engineered blood vessels. SMCs attached to and proliferated on and partly into the scaffolds. PMID:18615821

  12. Nanofibrillated cellulose from tobacco industry wastes.

    Science.gov (United States)

    Tuzzin, Glaiton; Godinho, Marcelo; Dettmer, Aline; Zattera, Ademir José

    2016-09-01

    Tobacco stems waste underwent steam explosion pulping for nanofibrillated cellulose (NFC) production. In order to obtain NFC hydrogels, the pulp obtained by steam explosion was bleached and refined in a grinder employing specific energy of up to 5067kWh/t. Eucalyptus kraft pulp was processed under the same conditions to produce NFC hydrogels, later used in order to compare with NFC hydrogels from tobacco stems waste. According to statistical analysis, the optimum tobacco stems pulping condition was obtained with a severity index of log3.0 and active alkali of 16.25%. These conditions allowed obtaining a bleached pulp with Schopper Riegler degree of 46. Electronic microscopy with field emission showed a higher presence of nanofibers in the tobacco stems pulp than in commercial eucalyptus kraft pulp, both after refining. Thermal analysis indicated that tobacco stems pulp degrade at lower temperatures than eucalyptus kraft pulp. FTIR analysis did not indicate chemical bonding differences between the two pulps. PMID:27185117

  13. Third Generation Biofuels via Direct Cellulose Fermentation

    Directory of Open Access Journals (Sweden)

    David B. Levin

    2008-07-01

    Full Text Available Consolidated bioprocessing (CBP is a system in which cellulase production, substrate hydrolysis, and fermentation are accomplished in a single process step by cellulolytic microorganisms. CBP offers the potential for lower biofuel production costs due to simpler feedstock processing, lower energy inputs, and higher conversion efficiencies than separate hydrolysis and fermentation processes, and is an economically attractive near-term goal for “third generation” biofuel production. In this review article, production of third generation biofuels from cellulosic feedstocks will be addressed in respect to the metabolism of cellulolytic bacteria and the development of strategies to increase biofuel yields through metabolic engineering.

  14. Registration probability of alphas in cellulose nitrate

    International Nuclear Information System (INIS)

    Registration 'thresholds' of alpha particles in cellulose nitrate plastic present a statistical behaviour. The effect depends on etching conditions. It is particularly large in strong etching conditions, in which registration is transposed to high energies: up to 7.7 MeV for the conditions and energies studied. 'Registration probability' expresses more adequately the effect of registration constraints. The study of registration probability indicates that the 'target theory' can describe the effect. The parameters of target theory, m (number of targets) and D0 (the equivalent of biological dose D37) were found to be: m = 5 and D0 = 3 x 107 erg cm-3. Dose distribution around the trajectory of alphas of various energies is estimated. It is also deduced that track development takes place when the required dose for registration is deposited at a distance r >= 20 A from particle trajectory. (author)

  15. Copper removal using electrosterically stabilized nanocrystalline cellulose.

    Science.gov (United States)

    Sheikhi, Amir; Safari, Salman; Yang, Han; van de Ven, Theo G M

    2015-06-01

    Removal of heavy metal ions such as copper using an efficient and low-cost method with low ecological footprint is a critical process in wastewater treatment, which can be achieved in a liquid phase using nanoadsorbents such as inorganic nanoparticles. Recently, attention has turned toward developing sustainable and environmentally friendly nanoadsorbents to remove heavy metal ions from aqueous media. Electrosterically stabilized nanocrystalline cellulose (ENCC), which can be prepared from wood fibers through periodate/chlorite oxidation, has been shown to have a high charge content and colloidal stability. Here, we show that ENCC scavenges copper ions by different mechanisms depending on the ion concentration. When the Cu(II) concentration is low (C0≲200 ppm), agglomerates of starlike ENCC particles appear, which are broken into individual starlike entities by shear and Brownian motion, as evidenced by photometric dispersion analysis, dynamic light scattering, and transmission electron microscopy. On the other hand, at higher copper concentrations, the aggregate morphology changes from starlike to raftlike, which is probably due to the collapse of protruding dicarboxylic cellulose (DCC) chains and ENCC charge neutralization by copper adsorption. Such raftlike structures result from head-to-head and lateral aggregation of neutralized ENCCs as confirmed by transmission electron microscopy. As opposed to starlike aggregates, the raftlike structures grow gradually and are prone to sedimentation at copper concentrations C0≳500 ppm, which eliminates a costly separation step in wastewater treatment processes. Moreover, a copper removal capacity of ∼185 mg g(-1) was achieved thanks to the highly charged DCC polyanions protruding from ENCC. These properties along with the biorenewability make ENCC a promising candidate for wastewater treatment, in which fast, facile, and low-cost removal of heavy metal ions is desired most. PMID:25950624

  16. Synthesis and properties of differently charged chemiluminescent acridinium ester labels.

    Science.gov (United States)

    Natrajan, Anand; Sharpe, David

    2013-02-14

    Chemiluminescent acridinium dimethylphenyl esters containing N-sulfopropyl groups in the acridinium ring are highly sensitive, hydrophilic labels that are used in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered with alkaline peroxide in the presence of a cationic surfactant. At physiological pH, N-sulfopropyl acridinium esters exist as water adducts that are commonly referred to as pseudobases. Pseudobase formation, which results from addition of water to the zwitterionic N-sulfopropyl acridinium ring, neutralizes the positive charge on the acridinium nitrogen and imparts a net negative charge to the label due to the sulfonate moiety. As a consequence, N-sulfopropyl acridinium ester conjugates of small molecule haptens as well as large molecules such as proteins gain negative charges at neutral pH. In the current study, we describe the synthesis and properties of two new hydrophilic acridinium dimethylphenyl ester labels where the net charge in the labels was altered. In one label, the structure of the hydrophilic N-alkyl group attached to the acridinium ring was changed so that the pseudobase of the label contains no net charge. In the second acridinium ester, two additional negative charges in the form of sulfopropyl groups were added to the acridinium ring to make this label's pseudobase strongly anionic. Chemiluminescence measurements of these labels, as well as their conjugates of an antibody with a neutral pI, indicate that acridinium ester charge while having a modest effect on emission kinetics has little influence on light output. However, our results demonstrate that acridinium ester charge can affect protein pI, apparent chemiluminescence stability and non-specific binding of protein conjugates to microparticles. These results emphasize the need for careful consideration of acridinium ester charge in order to optimize reagent stability and performance in immunoassays. In the current study, we observed that

  17. New organic-inorganic hybrid material based on functional cellulose nanowhisker, polypseudorotaxane and Au nanorods.

    Science.gov (United States)

    Garavand, Ali; Dadkhah Tehrani, Abbas

    2016-11-01

    Organic-inorganic functional hybrid materials play a major role in the development of advanced functional materials and recently have gained growing interest of the worldwide community. In this context, new hybrid organic-inorganic gel consisting of cellulose nanowhisker xanthate (CNWX) and S-H functionalized polypseudorotaxane (PPR) as organic parts of gel and gold nanorods (GNRs) as inorganic cross-linking agent were prepared. Firstly, thiolated α-cyclodextrin (α-CD-SH) was threaded onto poly-(ethylene glycol) bis (mercaptoethanoate ester) (PEG-SH) to give polypseudorotaxane (PPR) and then it reacted with GNRs in the presence of CNWX to give the new hybrid gel material. The new synthesized gel and its components characterized by spectroscopic measurement methods such as FT-IR, UV-vis and NMR spectroscopy. Interestingly, hybrid gel showed new polygonal plate like morphology with 45-60nm thickness and 400-600nm width. The obtained gel may have potential application in many fields especially in biomedical applications. PMID:27516265

  18. Exploring the favorable ion-exchange ability of phthalylated cellulose biopolymer using thermodynamic data.

    Science.gov (United States)

    de Melo, Júlio C P; da Silva Filho, Edson C; Santana, Sirlane A A; Airoldi, Claudio

    2010-09-01

    A phthalylated ion-exchange biopolymer was obtained by adding cellulose to molten phthalic anhydride in a quasi solvent-free procedure. Through this route 2.99+/-0.07 mmolg(-1) of pendant groups containing ester and carboxylic acid moieties were incorporated into the polymeric structure that was characterized by elemental analysis, solid-state carbon nuclear magnetic resonance (CP/MAS), infrared spectroscopy, X-ray diffraction, and thermogravimetry. The chemically modified polysaccharide is able to exchange cations from aqueous solution as demonstrated by batchwise methodology. The data were adjusted to a modified Langmuir equation to give 2.43+/-0.12 and 2.26+/-0.11 mmolg(-1) for divalent cobalt and nickel cations, respectively. The net thermal effects obtained from calorimetric titration measurements were also adjusted to a modified Langmuir equation, and the enthalpy of the interaction was calculated to give endothermic values of 2.11+/-0.28 and 2.50+/-0.31kJmol(-1) for these cations, respectively. The spontaneity of this ion-exchange process is reflected in negative Gibbs energy and with a contribution of positive entropic values. This set of thermodynamic data at the solid-liquid interface suggests a favorable ion-exchange process for this anchored biopolymer for cation exchange from the environment. PMID:20673881

  19. Preparation and Characterization of Immobilized Lipase from Pseudomonas Cepacia onto Magnetic Cellulose Nanocrystals

    Science.gov (United States)

    Cao, Shi-Lin; Huang, Yu-Mei; Li, Xue-Hui; Xu, Pei; Wu, Hong; Li, Ning; Lou, Wen-Yong; Zong, Min-Hua

    2016-02-01

    Magnetic cellulose nanocrystals (MCNCs) were prepared and used as an enzyme support for immobilization of Pseudomonas cepacialipase (PCL). PCL was successfully immobilized onto MCNCs (PCL@MCNC) by a precipitation-cross-linking method. The resulting PCL@MCNC with a nanoscale size had high enzyme loading (82.2 mg enzyme/g) and activity recovery (95.9%). Compared with free PCL, PCL@MCNC exhibited significantly enhanced stability and solvent tolerance, due to the increase of enzyme structure rigidity. The observable optimum pH and temperature for PCL@MCNC were higher than those of free PCL. PCL@MCNC manifested relatively higher enzyme-substrate affinity and catalytic efficiency. Moreover, PCL@MCNC was capable of effectively catalyzing asymmetric hydrolysis of ketoprofenethyl ester with high yield of 43.4% and product e.e. of 83.5%. Besides, immobilization allowed PCL@MCNC reuse for at least 6 consecutive cycles retaining over 66% of its initial activity. PCL@MCNC was readily recycled by magnetic forces. Remarkably, the as-prepared nanobiocatalyst PCL@MCNC is promising for biocatalysis.

  20. Fabrication of Piezoelectric Cellulose Paper and Audio Application

    Institute of Scientific and Technical Information of China (English)

    Jung-Hwan Kim; Sungryul Yun; Joo-Hyung Kim; Jaehwan Kim

    2009-01-01

    We report the fabrication process of piezoelectric cellulose paper and the enhancement method of its piezoelectric property.Stretching method with different wet-drawing ratios was introduced to increase the piezoelectric property of cellulose paper during regeneration process. It is observed that the Young's modulus and the piezoelectric charge constants are very dependent on the drawing ratio and the direction of nanofibrils of piezoelectric paper. Using the enhanced piezoelectric property, we prove that the flexible regenerated piezoelectric cellulose can be applied to the potential acoustic applications such as thin piezoelectric paper speaker.

  1. EFFECT BLEACHING REAGENT ON THE QUALITY OF FLAX CELLULOSE

    OpenAIRE

    Дейкун, Ірина Михайлівна

    2015-01-01

    The paper studies the impact of bleaching chemicals such as chlorine dioxide, hydrogen peroxide and chlorine on the product yield, residual lignin content, a-cellulose, viscosity, ash content and whiteness of flax natron cellulose for chemical processing.It was found that one-step processing of flax pulp with chlorine dioxide consumption rate 0,3…0,5 % and with hydrogen peroxide consumption rate 2…3 % by weight of abs. dry cellulose is more effective than treatment with chlorine water at chlo...

  2. Sustainable green composites of thermoplastic starch and cellulose fibers

    Directory of Open Access Journals (Sweden)

    Amnuay Wattanakornsiri

    2014-04-01

    Full Text Available Green composites have gained renewed interest as environmental friendly materials and as biodegradable renewable resources for a sustainable development. This review provides an overview of recent advances in green composites based on thermoplastic starch (TPS and cellulose fibers. It includes information about compositions, preparations, and properties of starch, cellulose fibers, TPS, and green composites based on TPS and cellulose fibers. Introduction and production of these recyclable composites into the material market would be important for environmental sustainability as their use can decrease the volume of petroleum derived plastic waste dumps. Green composites are comparable cheap and abundant, but further research and development is needed for a broader utilization.

  3. Natural Composites: Cellulose Fibres and the related Performance of Composites

    DEFF Research Database (Denmark)

    Lilholt, Hans; Madsen, Bo

    2014-01-01

    Biobased materials are becoming of increasing interest as potential structural materials for the future. A useful concept in this context is the fibre reinforcement of materials by stiff and strong fibres. The biobased resources can contribute with cellulose fibres and biopolymers. This offers...... in stiffness, on the packing ability of cellulose fibres and the related maximum fibre volume fraction in composites, on the moisture sorption of cellulose fibres and the related mass increase and (large) hygral strains induced, and on the mechanical performance of composites....

  4. Cellulose Electro-Active Paper: From Discovery to Technology Applications

    Directory of Open Access Journals (Sweden)

    Zafar eAbas

    2014-09-01

    Full Text Available Cellulose electro-active paper (EAPap is an attractive material of electro-active polymers (EAPs family due to its smart characteristics. EAPap is thin cellulose film coated with metal electrodes on both sides. Its large displacement output, low actuation voltage and low power consumption can be used for biomimetic sensors/actuators and electromechanical system. Because cellulose EAPap is ultra-lightweight, easy to manufacture, inexpensive, biocompatible, and biodegradable, it has been employed for many applications such as bending actuator, vibration sensor, artificial muscle, flexible speaker, and can be advantageous in areas such as micro-insect robots, micro-flying objects, microelectromechanical systems, biosensors, and flexible displays.

  5. NREL Proves Cellulosic Ethanol Can Be Cost Competitive (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-11-01

    Ethanol from non-food sources - known as "cellulosic ethanol" - is a near-perfect transportation fuel: it is clean, domestic, abundant, and renewable, and it can potentially replace 30% of the petroleum consumed in the United States, but its relatively high cost has limited its market. That changed in 2012, when the National Renewable Energy Laboratory (NREL) demonstrated the technical advances needed to produce cellulosic ethanol at a minimum ethanol selling price of $2.15/gallon (in 2007 dollars). Through a multi-year research project involving private industry, NREL has proven that cellulosic ethanol can be cost competitive with other transportation fuels.

  6. PPLA-cellulose nanocrystals nanocomposite prepared by in situ polymerization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This work reports the preparation and and characterization of a PLLA-cellulose nanocrystals nanocomposite obtained by in situ polymerization. The nanocomposite was prepared by ring opening polymerization of the lactide dimer in the presence of cellulose nanocrystals (CNCs) and the as-obtained materials was characterized using FTIR, DSC, XRD and TGA measurements. The incorporation of cellulose nanocrystals in PLLA using this method improved the thermal stability and increased the crystallinity of PLLA. These results indicate that the incorporation of CNCs by in situ polymerization improve thermal properties and has potential to improve also mechanical properties of this biodegradable polymer. (author)

  7. Preliminary Research on Structure and Properties of Nano-cellulose

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The structure of bacterial cellulose (BC) produced by Acetobacter xylinum NUST4 (A.xylinum NUST4) under static (SBC) and shake culture condition (ABC) was studied by means of transmission electron microscopic (TEM), X-ray diffraction (XRD) and Fourier transform-infrared spectrum (FT-IR). It was revealed that BC is Ⅰ crystal cellulose and the proportion of cellulose Ⅰα exceeds 80% and BC diameter is 10-80 nm.Mechanical properties and water absorption capacity were also determined. These properties could result from crystalline and nanometer structure of BC.

  8. Effect of temperature stress on protein methyl esters

    International Nuclear Information System (INIS)

    Protein methyl esters have been implicated in a number of physiological processes. They have measured the effect of temperature stress on the levels of protein methyl esters in the mesophilic fungus Penicillium chrysogenum (PCPS) and the thermophilic fungus P. duponti (PD). PD and PCPS were incubated with [methyl-3H]methionine. The mycelia were collected by filtration, frozen in liquid nitrogen and ground to a fine powder. The nitrogen powder was extracted with either phosphate buffer or with SDS, glycerol, phosphate, 2-mercaptoethanol. Insoluble material was removed by centrifugation. The supernatants were assayed for protein methyl esters. The released [3H]methanol was extracted into toluene:isoamyl alcohol (3:2) and quantitated by liquid scintillation. The production of volatile methanol was confirmed by use of Conway diffusion cells. Soluble proteins accounted for about one-fourth of the total protein methyl ester extracted by SDS. In PCPS, the SDS extracted proteins have about three times the level of esterification of the soluble proteins whereas in PD there is little difference between soluble and SDS extracted protein. The level of protein esterification in PD is about one-tenth that observed in PCPS. Temperature stress caused large changes in the level of protein esterification. The data suggest protein methyl esters may contribute to the adaptation to environmental stress

  9. RELEASE PAPER: CAN PHOSPHATE ESTERS BE AN ALTERNATIVE TO SILICONE?

    Directory of Open Access Journals (Sweden)

    Dan Belosinschi,

    2012-01-01

    Full Text Available Release paper is a special paper grade with one or both sides coated with non-sticking materials. Silicone is currently the only material used to produce release paper at the industrial level. Its remarkable properties and availability ensure product quality and sustainability of the industrial production. Meanwhile, the stability of silicone polymers raises serious environmental problems in terms of paper substrate recyclability. Studies are currently under way to evaluate the ability of phosphate esters as a new class of compounds capable of developing non-adhesive surface properties. This paper presents initial attempts to coat the paper with phosphate esters and to assess phosphate ester / fibrous substrate and phosphate ester / adhesive interactions. The results show that this class of compounds exhibits non-adhesive properties and, when coated on paper under certain conditions, can lead to a non-sticking surface. Despite the fact that there is a long way to achieve ester anchoring to surface fibers and to control the peeling force from an adhesive tape, preliminary results are encouraging.

  10. Chemiluminescence from alkoxy-substituted acridinium dimethylphenyl ester labels.

    Science.gov (United States)

    Natrajan, Anand; Sharpe, David; Wen, David

    2012-05-01

    Chemiluminescent acridinium dimethylphenyl ester labels are used in automated immunoassays for clinical diagnostics. Light emission from these labels is triggered by alkaline peroxide in the presence of the cationic surfactant cetyltrimethylammonium chloride (CTAC). The surfactant plays a critical role in the chemiluminescence process of these labels by both accelerating their emission kinetics and increasing total light output enabling high throughout and improved assay sensitivity in automated immunoassays. Despite the surfactant's crucial role in the chemiluminescent reaction, no study has investigated how structural perturbations in the acridinium ring could impact the influence of the surfactant. We describe herein the synthesis and properties of three new alkoxy-substituted, acridinium dimethylphenyl esters where the nature of the alkoxy group in the acridinium ring was varied (hydrophobic or hydrophilic). Chemiluminescence measurements of these alkoxy-substituted labels indicate that hydrophilic functional groups in the acridinium ring, in particular sulfobetaine zwitterions, disrupt surfactant-mediated compression of emission times but not enhancement of light yield. These results support the hypothesis that surfactant-mediated effects require the binding of two different reaction intermediates to surfactant aggregates and, that surfactants influence light emission from acridinium esters by two separate mechanisms. Our studies also indicate that preservation of both surfactant effects on acridinium ester chemiluminescence and low non-specific binding of the label can be achieved with a relatively hydrophobic acridinium ring coupled to a hydrophilic phenolic ester leaving group. PMID:22441905

  11. Solid state crystallisation of oligosaccharide ester derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Elaine Ann

    2002-07-01

    An investigation of the solid state properties of oligosaccharide ester derivatives (OEDs) with potential applications in drug delivery has been carried out. The amorphous form of two OEDs, trehalose octa-acetate (TOAC) and 6:6'-di-({beta}-tetraacetyl glucuronyl)-hexaacetyl trehalose (TR153), was investigated as a matrix for the sustained release of active ingredients. The matrices showed a tendency to crystallise and so polymorph screens were performed to provide crystalline samples for structural analysis. The crystal structures of TOAC methanolate and TR153 acetonitrile solvate have been determined by single-crystal laboratory X-ray diffraction. TOAC methanolate crystallises in the orthorhombic space group P2{sub 1}2{sub 1}2{sub 1} with a = 15.429(18) A, b = 17.934(19) A and c = 13.518(4) A at 123 K. The structure is isomorphous with the previously reported structure of TOAC monohydrate form II. TR153 acetonitrile solvate crystallises in the monoclinic spacegroup C2 with a = 30:160(6) A, b = 11.878(3) A, c 20.6645(5) A and {beta} = 115.027 (10) deg at 123 K. The crystal structures of both TOAC methanolate and TR153 acetonitrile solvate are stabilised by complex networks of intermolecular C--H...O contacts. Two model compounds were selected for dissolution studies: diltiazem hydrochloride, as a water- soluble organic salt, and ketoprofen as a poorly water-soluble organic compound. Dissolution of both compounds from amorphous TOAC and TR153 matrices was investigated. The release of both drugs was more rapid and complete from TOAC matrices than from TR153 matrices, with both matrices showing a tendency to crystallise (devitrify) during the course of the dissolution experiments. This tendency was greater for the TOAC matrix, which transformed to the extent of ca. 100% within 48 hours. The available evidence suggests that devitrification of the matrix in contact with water produces a polycrystalline, non-monolithic structure rich in microscopic cracks and pores

  12. Solid state crystallisation of oligosaccharide ester derivatives

    International Nuclear Information System (INIS)

    An investigation of the solid state properties of oligosaccharide ester derivatives (OEDs) with potential applications in drug delivery has been carried out. The amorphous form of two OEDs, trehalose octa-acetate (TOAC) and 6:6'-di-(β-tetraacetyl glucuronyl)-hexaacetyl trehalose (TR153), was investigated as a matrix for the sustained release of active ingredients. The matrices showed a tendency to crystallise and so polymorph screens were performed to provide crystalline samples for structural analysis. The crystal structures of TOAC methanolate and TR153 acetonitrile solvate have been determined by single-crystal laboratory X-ray diffraction. TOAC methanolate crystallises in the orthorhombic space group P212121 with a = 15.429(18) A, b = 17.934(19) A and c = 13.518(4) A at 123 K. The structure is isomorphous with the previously reported structure of TOAC monohydrate form II. TR153 acetonitrile solvate crystallises in the monoclinic spacegroup C2 with a = 30:160(6) A, b = 11.878(3) A, c 20.6645(5) A and β = 115.027 (10) deg at 123 K. The crystal structures of both TOAC methanolate and TR153 acetonitrile solvate are stabilised by complex networks of intermolecular C--H...O contacts. Two model compounds were selected for dissolution studies: diltiazem hydrochloride, as a water- soluble organic salt, and ketoprofen as a poorly water-soluble organic compound. Dissolution of both compounds from amorphous TOAC and TR153 matrices was investigated. The release of both drugs was more rapid and complete from TOAC matrices than from TR153 matrices, with both matrices showing a tendency to crystallise (devitrify) during the course of the dissolution experiments. This tendency was greater for the TOAC matrix, which transformed to the extent of ca. 100% within 48 hours. The available evidence suggests that devitrification of the matrix in contact with water produces a polycrystalline, non-monolithic structure rich in microscopic cracks and pores which allows diffusion of the

  13. Using Cellulosic Ethanol to ‘Go Green’: What Price for Carbon?

    OpenAIRE

    Miranowski, John A.; Rosburg, Alicia

    2010-01-01

    The revised Renewable Fuels Standard (RFS2) mandates that cellulosic biofuels be part of the liquid transportation fuel mix and contribute to reducing our carbon footprint. Unfortunately, since no commercial cellulosic biorefinery exists and cellulosic biomass production is typically smaller scale than conventional crop production, limited knowledge exists of the actual costs of producing cellulosic biomass and converting it to cellulosic ethanol. Understanding of the implications of RFS2 req...

  14. Cellulose Assemblies Produced by Acetobacter Xylinum (FUNDAMENTAL MATERIAL PROPERTIES-Molecular Dynamic Characteristics)

    OpenAIRE

    Hirai, Asako; Horii, Fumitaka

    2000-01-01

    Structures of cellulose assemblies produced by Acetobacter xylinum under various conditions have been studied mainly by transmission electron microscopy. Native cellulose crystals are composites of cellulose Iα and Iβ . Twisted-ribbn cellulose assemblies produced in the HS medium at 28 °C were rich in cellulose Iα . On the contrary, splayed microfibrils produced in the presence of CMC at 28 °C were rich in Iβ . Not only the ribbon assembly but also the bundle of splayed microfibrils was deter...

  15. Parallel-up structure evidences the molecular directionality during biosynthesis of bacterial cellulose

    OpenAIRE

    Koyama, Makiko; Helbert, William; Imai, Tomoya; Sugiyama, Junji; Henrissat, Bernard

    1997-01-01

    The “parallel-up” packing in cellulose Iα and Iβ unit cells was experimentally demonstrated by a combination of direct-staining the reducing ends of cellulose chains and microdiffraction-tilting electron crystallographic analysis. Microdiffraction investigation of nascent bacterial cellulose microfibrils showed that the reducing end of the growing cellulose chains points away from the bacterium, and this provides direct evidence that polymerization by the cellulose synthase takes place at the...

  16. Structure of the Cellulose Synthase Complex of Gluconacetobacter hansenii at 23.4 Å Resolution

    OpenAIRE

    Juan Du; Venkata Vepachedu; Sung Hyun Cho; Manish Kumar; B Tracy Nixon

    2016-01-01

    Bacterial crystalline cellulose is used in biomedical and industrial applications, but the molecular mechanisms of synthesis are unclear. Unlike most bacteria, which make non-crystalline cellulose, Gluconacetobacter hansenii extrudes profuse amounts of crystalline cellulose. Its cellulose synthase (AcsA) exists as a complex with accessory protein AcsB, forming a 'terminal complex' (TC) that has been visualized by freeze-fracture TEM at the base of ribbons of crystalline cellulose. The catalyt...

  17. Screening of the effective cellulose-degradable strain and its application in the production of cellulose bioethanol

    Institute of Scientific and Technical Information of China (English)

    Peng-fei Gao; Dai-di Fan; Pei Ma; Yan-e Luo; Xiao-xuan Ma; Chen-hui Zhu; Jun-feng Hui

    2009-01-01

    Strains from the cellulose-containing environment were collected. Primary screening(by filter-paper Hutchison solid culture medium and sodium carboxymethylcellulose solid culture medium) and reelection(by filter-paper inorganic salt culture medium and sodium carboxymethylcellulosc Congo red coltnre medium) indicated that five strains obtained were best suited for high performance cellulose degradation. Determination of sodium carboxymethylcellulose activity(CMCA) and filter paper activity(FPA) was accomplished for each of the five. The strongest of the five in CMCA and FPA was applied to the production of cellulose bioethanol by separate hydrolysis and fermentation(SHF) and simultaneous saccharification and fermentation(SSF) respectively.

  18. Saliva-catalyzed hydrolysis of a ketobemidone ester prodrug

    DEFF Research Database (Denmark)

    Hansen, L.B.; Christrup, Lona Louring; Bundgaard, H.

    Saliva enzyme-catalysed hydrolysis of ester prodrugs or drugs containing sensitive ester groups may be a limiting factor for the buccal absorption of such compounds. Using the isopropyl carbonate ester of ketobemidone as a model substance of a hydrolysis-sensitive prodrug the esterase activity of...... human saliva has been characterized as a function of various factors. The esterase activity was found to decrease rapidly upon storage of the saliva at 37°C. The activity increased with increasing pH in the range 4.5-7.4 and with increasing salivation flow rate up to a rate of 0.9 ml min. Under resting...... conditions, the flow rate was about 0.2 ml min which implied a greatly decreased esterase activity. The activity was highest after fasting and decreased after intake of a meal. The intraindividual variation in the saliva esterase activity was small whereas a larger interindividual variation was found....

  19. Isolation and pharmacological activity of phenylpropanoid esters from Marrubium vulgare.

    Science.gov (United States)

    Sahpaz, Sevser; Garbacki, Nancy; Tits, Monique; Bailleul, Francois

    2002-03-01

    The isolation and identification of major phenylpropanoid esters from Marrubium vulgare: (+) (E)-caffeoyl-L-malic acid 1, acteoside 2, forsythoside B 3, arenarioside 4, ballotetroside 5, as well as their anti-inflammatory activity are reported for the first time. We evaluated the inhibitory effects of these five compounds on cyclooxygenase (Cox) catalysed prostaglandin biosynthesis activity. Only the glycosidic phenylpropanoid esters showed an inhibitory activity towards the Cox-2 enzyme and three of them: acteoside 2, forsythoside B 3, arenarioside 4, exhibited higher inhibitory potencies on Cox-2 than on Cox-1. These results are of interest, as Cox-2 is mainly associated with inflammation and the Cox-1 inhibition with adverse side effects often observed with non-steroidal anti-inflammatory drugs. The occurrence of these phenylpropanoid esters could also explain some other pharmacological properties of M. vulgare. PMID:11849848

  20. Maximization of fructose esters synthesis by response surface methodology.

    Science.gov (United States)

    Neta, Nair Sampaio; Peres, António M; Teixeira, José A; Rodrigues, Ligia R

    2011-07-01

    Enzymatic synthesis of fructose fatty acid ester was performed in organic solvent media, using a purified lipase from Candida antartica B immobilized in acrylic resin. Response surface methodology with a central composite rotatable design based on five levels was implemented to optimize three experimental operating conditions (temperature, agitation and reaction time). A statistical significant cubic model was established. Temperature and reaction time were found to be the most significant parameters. The optimum operational conditions for maximizing the synthesis of fructose esters were 57.1°C, 100 rpm and 37.8 h. The model was validated in the identified optimal conditions to check its adequacy and accuracy, and an experimental esterification percentage of 88.4% (±0.3%) was obtained. These results showed that an improvement of the enzymatic synthesis of fructose esters was obtained under the optimized conditions. PMID:21356336

  1. Boric Ester-Type Molten Salt via Dehydrocoupling Reaction

    Directory of Open Access Journals (Sweden)

    Noriyoshi Matsumi

    2014-11-01

    Full Text Available Novel boric ester-type molten salt was prepared using 1-(2-hydroxyethyl-3-methylimidazolium chloride as a key starting material. After an ion exchange reaction of 1-(2-hydroxyethyl-3-methylimidazolium chloride with lithium (bis-(trifluoromethanesulfonyl imide (LiNTf2, the resulting 1-(2-hydroxyethyl-3-methylimidazolium NTf2 was reacted with 9-borabicyclo[3.3.1]nonane (9-BBN to give the desired boric ester-type molten salt in a moderate yield. The structure of the boric ester-type molten salt was supported by 1H-, 13C-, 11B- and 19F-NMR spectra. In the presence of two different kinds of lithium salts, the matrices showed an ionic conductivity in the range of 1.1 × 10−4–1.6 × 10−5 S cm−1 at 51 °C. This was higher than other organoboron molten salts ever reported.

  2. A Comparison Study: The New Extended Shelf Life Isopropyl Ester PMR Technology versus The Traditional Methyl Ester PMR Approach

    Science.gov (United States)

    Alston, William B.; Scheiman, Daniel A.; Sivko, Gloria S.

    2005-01-01

    Polymerization of Monomeric Reactants (PMR) monomer solutions and carbon cloth prepregs of PMR II-50 and VCAP-75 were prepared using both the traditional limited shelf life methanol based PMR approach and a novel extended shelf life isopropanol based PMR approach. The methyl ester and isopropyl ester based PMR monomer solutions and PMR prepregs were aged for up to four years at freezer and room temperatures. The aging products formed were monitored using high pressure liquid chromatography (HPLC). The composite processing flow characteristics and volatile contents of the aged prepregs were also correlated versus room temperature storage time. Composite processing cycles were developed and six ply cloth laminates were fabricated with prepregs after various extended room temperature storage times. The composites were then evaluated for glass transition temperature (Tg), thermal decomposition temperature (Td), initial flexural strength (FS) and modulus (FM), long term (1000 hours at 316 C) thermal oxidative stability (TOS), and retention of FS and FM after 1000 hours aging at 316 C. The results for each ester system were comparable. Freezer storage was found to prevent the formation of aging products for both ester systems. Room temperature storage of the novel isopropyl ester system increased PMR monomer solution and PMR prepreg shelf life by at least an order of magnitude while maintaining composite properties.

  3. Poroelastic Mechanical Effects of Hemicelluloses on Cellulosic Hydrogels under Compression

    Science.gov (United States)

    Lopez-Sanchez, Patricia; Cersosimo, Julie; Wang, Dongjie; Flanagan, Bernadine; Stokes, Jason R.; Gidley, Michael J.

    2015-01-01

    Hemicelluloses exhibit a range of interactions with cellulose, the mechanical consequences of which in plant cell walls are incompletely understood. We report the mechanical properties of cell wall analogues based on cellulose hydrogels to elucidate the contribution of xyloglucan or arabinoxylan as examples of two hemicelluloses displaying different interactions with cellulose. We subjected the hydrogels to mechanical pressures to emulate the compressive stresses experienced by cell walls in planta. Our results revealed that the presence of either hemicellulose increased the resistance to compression at fast strain rates. However, at slow strain rates, only xyloglucan increased composite strength. This behaviour could be explained considering the microstructure and the flow of water through the composites confirming their poroelastic nature. In contrast, small deformation oscillatory rheology showed that only xyloglucan decreased the elastic moduli. These results provide evidence for contrasting roles of different hemicelluloses in plant cell wall mechanics and man-made cellulose-based composite materials. PMID:25794048

  4. X-ray irradiation induced degradation of cellulose nitrate

    International Nuclear Information System (INIS)

    Energy-dispersive X-ray fluorescence (EDXRF) spectrometry was previously proposed to measure the thickness of the cellulose nitrate layer of the commonly used LR 115 solid-state nuclear track detector (SSNTD). The present work is devoted to the investigation whether the X-ray radiation involved in EDXRF spectrometry will induce degradation of the cellulose nitrate. For this purpose, Fourier transform infrared (FTIR) spectroscopy was employed to examine the nitrate functions (at the wavenumber 1598 cm-1) and the glycosidic bonds (at 1146 cm-1) for various irradiation time involved in the EDXRF spectrometry. No significant changes were observed even for X-ray irradiation up to 3000 live seconds, which was equivalent for 10 separate scans and should be far more than enough for a determination of the cellulose nitrate layer thickness. Therefore, EDXRF remains a fast and non-destructive method to measure the active layer thickness of the cellulose nitrate SSNTD

  5. Synthesis and properties of fluorescent cotton cellulose labeled with norfloxacin

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    To expand the application of cellulose in the field of fluorescence techniques, the cotton cellulose was labeled with norfloxacin (Cell-NF) via a three-step reaction, involving alkali treatment, epoxy activation, and opening of the epoxy rings with norfloxacin molecules. And the coordination complexes of Cell-NF with rare earth ions terbium (Cell-NF-Tb) and europium (Cell-NF-Eu) were obtained. The products were detected by IR, TG, XPS, UV and fluorescence spectra. Results showed that the norfloxacin content of the labeled cellulose was about 6.73 w‰ and the start temperature of decomposition of the Cell-NF was raised by 40°C compared with the stock cotton cellulose. When excited at 340 nm, the Cell-NF, Cell-NF-Tb, and Cell-NF-Eu in the solid state could emit violet (430 nm), green (549 nm) and red (620 nm) light, respectively.

  6. Preparation of succinylated cellulose membranes for functionalization purposes.

    Science.gov (United States)

    Ribeiro-Viana, Renato M; Faria-Tischer, Paula C S; Tischer, Cesar A

    2016-09-01

    The anhydroglucose chains of cellulose possess hydroxyls that facilitate different chemical modification strategies to expand on, or provide new applications for membranes produced by the bacteria Gluconacetobacter xylinus. Conjugation with biomolecules such as proteins, especially by the amine groups, is of great value and interest for the production of biomaterial derivatives from bacterial cellulose. To assist in these modifications, cellulose was succinylated in order to prevent steric hindrance and to create an attachment point for conjugation. Bacterial cellulose membranes were first treated in dichloromethane and reacted with succinic anhydride through a series of conditions. The membrane structure remained intact after these first processes and the product was confirmed by Infra-Red spectroscopy and solid state nuclear magnetic resonance and characterized by X-ray diffraction, thermogravimetry and atomic force microscopy. Hydrolyzed collagen was used as a model protein of interest to be conjugated to these membranes, which furnished a biomaterial functionalized over its surface. PMID:27185111

  7. Microfibrillated cellulose and new nanocomposite materials: a review

    DEFF Research Database (Denmark)

    Siró, Istvan; Plackett, David

    2010-01-01

    continuing research and are commercially interesting in terms of new products from the pulp and paper industry and the agricultural sector. Cellulose nanofibers can be extracted from various plant sources and, although the mechanical separation of plant fibers into smaller elementary constituents has......Due to their abundance, high strength and stiffness, low weight and biodegradability, nano-scale cellulose fiber materials (e.g., microfibrillated cellulose and bacterial cellulose) serve as promising candidates for bio-nanocomposite production. Such new high-value materials are the subject of...... typically required high energy input, chemical and/or enzymatic fiber pre-treatments have been developed to overcome this problem. A challenge associated with using nanocellulose in composites is the lack of compatibility with hydrophobic polymers and various chemical modification methods have been explored...

  8. Macromolecular organization of xyloglucan and cellulose in pea epicotyls

    International Nuclear Information System (INIS)

    Xyloglucan is known to occur widely in the primary cell walls of higher plants. This polysaccharide in most dicots possesses a cellulose-like main chain with three of every four consecutive residues substituted with xylose and minor addition of other sugars. Xyloglucan and cellulose metabolism is regulated by different processes; since different enzyme systems are probably required for the synthesis of their 1,4-β-linkages. A macromolecular complex composed of xyloglucan and cellulose only was obtained from elongating regions of etiolated pea stems. It was examined by light microscopy using iodine staining, by radioautography after labeling with [3H]fructose, by fluorescence microscopy using a fluorescein-lectin (fructose-binding) as probe, and by electron microscopy after shadowing. The techniques all demonstrated that the macromolecule was present in files of cell shapes, referred to here as cell-wall ghosts, in which xyloglucan was localized both on and between the cellulose microfibrils

  9. Optimization of cellulose materials radiolysis and enzyme hydrolysis in combination

    International Nuclear Information System (INIS)

    The influence of dose rate (0.71 kGy/h to 5.43 kGy/h) on the degree of cellulose polymerization irradiated with a dose of 300 kGy was followed. It was inexpressive. The study of the post effect manifesting itself as a reduction in the degree of cellulose polymerization irradiated with 100 kGy was conducted. In dried cellulose after 56 days as much as 30% decline in polymerization was found, in cellulose not dried after 112 days 11% decline in polymerization was found. The optimum mass ratio substrate - enzyme solution for wheat straw hydrolysis (1:5) was found. Hydrolysis of wheat straw irradiated with a dose of 1 MGy yielded these results: the capacity of resulted sugars in substrate 35.6%; sugars concentration in reactive mixture 60 mg/ml. (author)

  10. Cellulosic Fibers: Effect of Processing on Fiber Bundle Strength

    DEFF Research Database (Denmark)

    Thygesen, Anders; Madsen, Bo; Thomsen, Anne Belinda; Lilholt, Hans

    2011-01-01

    A range of differently processed cellulosic fibers from flax and hemp plants were investigated to study the relation between processing of cellulosic fibers and fiber bundle strength. The studied processing methods are applied for yarn production and include retting, scutching, carding, and...... cottonization. There was a monotonically decreasing relationship between the strength and the number of processing steps, which was well fitted by an exponential regression line. The reduction factor was determined to be 0.27, indicating that the fiber bundle strength was on average reduced by 27% per...... processing step at the applied conditions. No large changes in cellulose content and crystallinity were observed, so the reduction in strength must be explained by other changes in the fiber ultrastructure. Altogether, the study presents a quantitative basis for reduction in strength of cellulosic fibers due...

  11. Direct microwave-assisted hydrothermal depolymerization of cellulose.

    Science.gov (United States)

    Fan, Jiajun; De bruyn, Mario; Budarin, Vitaliy L; Gronnow, Mark J; Shuttleworth, Peter S; Breeden, Simon; Macquarrie, Duncan J; Clark, James H

    2013-08-14

    A systematic investigation of the interaction of microwave irradiation with microcrystalline cellulose has been carried out, covering a broad temperature range (150 → 270 °C). A variety of analytical techniques (e.g., HPLC, (13)C NMR, FTIR, CHN analysis, hydrogen-deuterium exchange) allowed for the analysis of the obtained liquid and solid products. Based on these results a mechanism of cellulose interaction with microwaves is proposed. Thereby the degree of freedom of the cellulose enclosed CH2OH groups was found to be crucial. This mechanism allows for the explanation of the different experimental observations such as high efficiency of microwave treatment; the dependence of the selectivity/yield of glucose on the applied microwave density; the observed high glucose to HMF ratio; and the influence of the degree of cellulose crystallinity on the results of the hydrolysis process. The highest selectivity toward glucose was found to be ~75% while the highest glucose yield obtained was 21%. PMID:23895516

  12. Raman spectroscopic analysis of isomers of biliverdin dimethyl ester.

    Science.gov (United States)

    Matysik, J; Hildebrandt, P; Smit, K; Mark, F; Gärtner, W; Braslavsky, S E; Schaffner, K; Schrader, B

    1997-06-01

    The constitutional isomers of biliverdin dimethyl ester, IX alpha and XIII alpha, were studied by resonance Raman spectroscopy. The far-reaching spectral similarities suggest that despite the different substitution patterns, the compositions of the normal modes are closely related. This conclusion does not hold only for the parent state (ZZZ, sss configuration) but also for the configurational isomers which were obtained upon double-bond photoisomerization. Based on a comparison of the resonance Raman spectra, a EZZ configuration is proposed for one of the two photoisomers of biliverdin dimethyl ester IX alpha, while a ZZE, ssa configuration has been assigned previously to the second isomer. PMID:9226559

  13. Sodium borohydride reduction of aromatic carboxylic acids via methyl esters

    Indian Academy of Sciences (India)

    Aamer Saeed; Zaman Ashraf

    2006-09-01

    A number of important aromatic carboxylic acids precursors, or intermediates in the syntheses of natural products, are converted into methyl esters and reduced to the corresponding primary alcohols using a sodium borohydride-THF-methanol system. The alcohols are obtained in 70-92% yields in 2-5 hours, in a pure state. This two-step procedure not only provides a better alternative to aluminum hydride reduction of acids but also allows the selective reduction of esters in presence of acids, amides, nitriles or nitro functions which are not affected under these conditions.

  14. Solvent effects on hydrogen bonding between primary alcohols and esters

    Institute of Scientific and Technical Information of China (English)

    DHARMALINGAM K.; RAMACHANDRAN K.; SIVAGURUNATHAN P.

    2006-01-01

    The interaction by hydrogen bond formation of some primary alcohols (1-heptanol, 1-octanol and 1-decanol) with esters (methyl methacrylate, ethyl methacrylate and butyl methacrylate) was investigated in non-polar solvents viz., n-heptane,CCh and benzene by means of FTIR spectroscopy. Formation constants and free energy changes of complex formation were determined. The dependence of the equilibrium constants and free energy changes of complex formation on the alkyl chain length of both the alcohols and esters are discussed. The solvent effect on the hydrogen bond formation is discussed in terms of specific interaction between the solute and solvent.

  15. Preparation and characterization of gelatin scaffold containing microorganism fermented cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Youn Mook; Gwon, Hui Jeong; Park, Jong Seok; Nho, Young Chang; Lee, Byeong Heon [Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of); Kim, Mi Yeong; Lee, Jong Dae; Song, Sung Gi [Quegenbiotech, Co., Incheon (Korea, Republic of)

    2010-12-15

    Cellulose, chitin, chitosan and hyaluronic acid are well known as polysaccharides. These polysaccharides have many effects on cell growth and differentiation. Cell activation increases with increasing the polysaccharides concentration. In this study, gelatin scaffold containing microorganism fermented cellulose, citrus gel were prepared by using irradiation technique. Physical properties of the scaffolds were investigated as a function of the concentrations of gelatin and citrus gel and the cell attachment, cell morphology and inflammation of the scaffolds also were characterized for regeneration of skin tissue.

  16. Experimental Evolution of Trichoderma citrinoviride for Faster Deconstruction of Cellulose

    OpenAIRE

    Lin, Hui; Travisano, Michael; Kazlauskas, Romas J.

    2016-01-01

    Engineering faster cellulose deconstruction is difficult because it is a complex, cooperative, multi-enzyme process. Here we use experimental evolution to select for populations of Trichoderma citrinoviride that deconstruct up to five-fold more cellulose. Ten replicate populations of T. citrinoviride were selected for growth on filter paper by serial culture. After 125 periods of growth and transfer to fresh media, the filter paper deconstruction increased an average of 2.5 fold. Two populati...

  17. Self-supported silver nanoparticles containing bacterial cellulose membranes

    International Nuclear Information System (INIS)

    Hydrated bacterial cellulose (BC) membranes obtained from cultures of Acetobacter xylinum were used in the preparation of silver nanoparticles containing cellulose membranes. In situ preparation of Ag nanoparticles was achieved from the hydrolytic decomposition of silver triethanolamine (TEA) complexes. Scanning electron microscopy (SEM) images and X-ray diffraction (XRD) patterns both lead to the observation of spherical metallic silver particles with mean diameter of 8 nm well adsorbed onto the BC fibriles

  18. Evaluating Models of Cellulose Degradation by Fibrobacter succinogenes S85

    OpenAIRE

    Burnet, Meagan C.; Dohnalkova, Alice C.; Neumann, Anthony P.; Lipton, Mary S.; Smith, Richard D.; Suen, Garret; Callister, Stephen J.

    2015-01-01

    Fibrobacter succinogenes S85 is an anaerobic non-cellulosome utilizing cellulolytic bacterium originally isolated from the cow rumen microbial community. Efforts to elucidate its cellulolytic machinery have resulted in the proposal of numerous models which involve cell-surface attachment via a combination of cellulose-binding fibro-slime proteins and pili, the production of cellulolytic vesicles, and the entry of cellulose fibers into the periplasmic space. Here, we used a combination of RNA-...

  19. Self-supported silver nanoparticles containing bacterial cellulose membranes

    Energy Technology Data Exchange (ETDEWEB)

    Barud, Hernane S.; Barrios, Celina; Regiani, Thais; Marques, Rodrigo F.C. [Institute of Chemistry-UNESP, CP 355, Zip 14801-970, Araraquara, SP, 14801-970 (Brazil); Verelst, Marc; Dexpert-Ghys, Jeannette [Centre d' Elaboration de Materiaux et d' Etudes Structurales, CEMES, UPR No. 8011 - Universite Toulouse III, B.P. 94347, 29 rue Jeanne Marvig, 31055 Toulouse Cedex (France); Messaddeq, Younes [Institute of Chemistry-UNESP, CP 355, Zip 14801-970, Araraquara, SP, 14801-970 (Brazil); Ribeiro, Sidney J.L. [Institute of Chemistry-UNESP, CP 355, Zip 14801-970, Araraquara, SP, 14801-970 (Brazil)], E-mail: sidney@iq.unesp.br

    2008-05-01

    Hydrated bacterial cellulose (BC) membranes obtained from cultures of Acetobacter xylinum were used in the preparation of silver nanoparticles containing cellulose membranes. In situ preparation of Ag nanoparticles was achieved from the hydrolytic decomposition of silver triethanolamine (TEA) complexes. Scanning electron microscopy (SEM) images and X-ray diffraction (XRD) patterns both lead to the observation of spherical metallic silver particles with mean diameter of 8 nm well adsorbed onto the BC fibriles.

  20. Functionalization of cellulose acetate fibers with engineered cutinases

    OpenAIRE

    Matamá, Maria Teresa; Araújo, Rita; Gübitz, Georg M.; Casal, Margarida; Paulo, Artur Cavaco

    2009-01-01

    In the present work, we describe for the first time the specific role of cutinase on surface modification of cellulose acetate fibers. Cutinase exhibits acetyl esterase activity on diacetate and triacetate of 0.010 U and 0.007 U, respectively. An increase on the hydroxyl groups at the fiber surface of 25% for diacetate and 317% for triacetate, after a 24 h treatment, is estimated by an indirect assay. Aiming at further improvement of cutinase affinity toward cellulose acetate, chimeric cutina...

  1. How cellulose stretches: synergism between covalent and hydrogen bonding

    OpenAIRE

    Altaner, Clemens M.; Thomas, Lynne H.; Fernandes, Anwesha N; Jarvis, Michael C.

    2014-01-01

    Cellulose is the most familiar and most abundant strong biopolymer, but the reasons for its outstanding mechanical performance are not well understood. Each glucose unit in a cellulose chain is joined to the next by a covalent C–O–C linkage flanked by two hydrogen bonds. This geometry suggests some form of cooperativity between covalent and hydrogen bonding. Using infrared spectroscopy and X-ray diffraction, we show that mechanical tension straightens out the zigzag conformation of the cellul...

  2. Production of bacterial cellulose and enzyme from waste fiber sludge

    OpenAIRE

    Cavka, Adnan; Guo, Xiang; Tang, Shui-Jia; Winestrand, Sandra; Jönsson, Leif J.; Hong, Feng

    2013-01-01

    Background: Bacterial cellulose (BC) is a highly crystalline and mechanically stable nanopolymer, which has excellent potential as a material in many novel applications, especially if it can be produced in large amounts from an inexpensive feedstock. Waste fiber sludge, a residue with little or no value, originates from pulp mills and lignocellulosic biorefineries. A high cellulose and low lignin content contributes to making the fiber sludge suitable for bioconversion, even without a thermoc...

  3. Cellulose digestion in heterotmes indicola, Wasmann and Coptotermes HIEMI Wasmann

    Directory of Open Access Journals (Sweden)

    J. N. Misra

    1960-07-01

    Full Text Available High activities of cellulose and cellobiase have been found in the gut extracts of the worker caste of two species of Heterotermes indicola, Wasmann and Coptotermes heimi, Wasmann. The properties of the two enzymes from H. Indicola have been investigated. It has been found that the soldier caste of these termites is capable of splitting cellobiose while incapable of breaking down cellulose into simpler sugars.

  4. Cellulose based transition metal nano-composites : structuring and development

    OpenAIRE

    Glatzel, Stefan

    2013-01-01

    Cellulose is the most abundant biopolymer on earth. In this work it has been used, in various forms ranging from wood to fully processed laboratory grade microcrystalline cellulose, to synthesise a variety of metal and metal carbide nanoparticles and to establish structuring and patterning methodologies that produce highly functional nano-hybrids. To achieve this, the mechanisms governing the catalytic processes that bring about graphitised carbons in the presence of iron have been investigat...

  5. Chemical Compounds Recovery in Carboxymethyl Cellulose Wastewater Treatment

    OpenAIRE

    P.-H. Rao; W.-Q. Zhang; Yao, W.; A.-Y. Zhu; J.-L. Xia; Y.-F. Tan; T.-Z. Liu

    2015-01-01

    Carboxymethyl cellulose (CMC) is a kind of cellulose ether widely used in industrial production. CMC wastewater usually have high chemical oxygen demand (COD) and salinity (>10 %), which result from organic and inorganic by-products during CMC production. It is significant that the wastewater is pretreated to decrease salinity and recover valuable organics before biochemical methods are employed. In this paper, distillation-extraction method was used to pretreat CMC wastewater and recover val...

  6. Evidence of cellulose metabolism by the giant panda gut microbiome

    OpenAIRE

    Zhu, Lifeng; Wu, Qi; Dai, Jiayin; Zhang, Shanning; Wei, Fuwen

    2011-01-01

    The giant panda genome codes for all necessary enzymes associated with a carnivorous digestive system but lacks genes for enzymes needed to digest cellulose, the principal component of their bamboo diet. It has been posited that this iconic species must therefore possess microbial symbionts capable of metabolizing cellulose, but these symbionts have remained undetected. Here we examined 5,522 prokaryotic ribosomal RNA gene sequences in wild and captive giant panda fecal samples. We found lowe...

  7. Adsorption studies on cellulose surfaces by combinations of interfacial techniques

    OpenAIRE

    Eronen, Paula

    2011-01-01

    In this work, the adsorption of various polymers on cellulose surfaces was studied in detail at molecular level. Special attention was paid on the interactions between renewable polysaccharides and different nanofibrillated cellulose (NFC) grades. Polymer or nanoparticle adsorption in aqueous medium was explored as a strategy to functionalize NFC. The role of pulp raw material and chemical pre-treatment on the NFC properties was clarified via indirect adsorption studies with ultrathin NFC fil...

  8. Cellulose nanorods in liquid crystalline elastomers for improved actuators

    OpenAIRE

    Pontes, Rita Valério

    2014-01-01

    Nanotechnology plays a central role in ‘tailoring’ materials’ properties and thus improving its performances for a wide range of applications. Coupling nature nano-objects with nanotechnology results in materials with enhanced functionalities. The main objective of this master thesis was the synthesis of nanocrystalline cellulose (NCCs) and its further incorporation in a cellulosic matrix, in order to produce a stimuli-responsive material to moisture. The induced behaviour (bending/unbendi...

  9. Chemical Modification of Microfibrillated Cellulose: Effects on Film Barrier Properties

    OpenAIRE

    Rodionova, Galina

    2011-01-01

    A global demand for environmental sustainability is a strong driving force towards the development of enhanced barrier concepts and the use of new materials, especially for packaging applications. Abundant and renewable, cellulosic fibers have been widely used as one of the main constituents in the fiber-based packaging. However, the porous and hydrophilic structure of cellulose network requires the use of barrier polymer coatings to create an additional resistance against water, water vapors...

  10. Viscosity sinergism of hydrozypropmethyl and carboxy methyl cellulose

    OpenAIRE

    Katona Jaroslav M.; Sovilj Verica J.; Petrović Lidija B.

    2008-01-01

    Rheology modifiers are common constituents of food, cosmetic and pharmaceutic products. Often, by using two or more of them, better control of the product rheological properties can be achieved. In this work, rheological properties of hydroxypropymethyl cellulose (HPMC) and sodium carboxymethyl cellulose (NaCMC) solutions of different concentrations were investigated and compared to the flow properties of 1% HPMC/NaCMC binary mixtures at various HPMC/NaCMC mass ratios. Solutions of HPMC and N...

  11. Electrospun nanosized cellulose fibers using ionic liquids at room temperature

    OpenAIRE

    Freire, Mara G.; Teles, Ana Rita R.; Ferreira, Rute A. S.; Carlos, Luís D.; José A. Lopes-da-Silva; Coutinho, João A. P.

    2011-01-01

    Aiming at replacing the noxious solvents commonly employed, ionic-liquid-based solvents have been recently explored as novel non-volatile and non-flammable media for the electrospinning of polymers. In this work, nanosized and biodegradable cellulose fibers were obtained by electrospinning at room temperature using a pure ionic liquid or a binary mixture of two selected ionic liquids. The electrospinning of 8 wt% cellulose in 1-ethyl-3-methylimidazolium acetate medium (a low viscosity and roo...

  12. FRACTIONATION OF HYDROLYZED MICROCRYSTALLINE CELLULOSE BY ULTRAFILTRATION MEMBRANE

    OpenAIRE

    NGUYEN HUYNH THAO THY; RAJESH NITHYANANDAM

    2016-01-01

    Bioethanol process using cellulosic materials have been emerging an interesting field with a high potential of replacing petroleum-based fuel, as a future alternative. This work emphasised on improvement of enzymatic hydrolysis of alkaline NaOH-pretreated cellulose by applying an ultrafiltration membrane 10 kDa cutoff in order to minimise sugar inhibition on enzymes, reuse enzyme in hydrolysis and recover sugar for the subsequent fermentation. An improvement in the methodology of the enzymati...

  13. Bacterial cellulose biosynthesis: diversity of operons, subunits, products and functions

    OpenAIRE

    Römling, Ute; Galperin, Michael Y

    2015-01-01

    Recent studies of bacterial cellulose biosynthesis, including structural characterization of a functional cellulose synthase complex, provided the first mechanistic insight into this fascinating process. In most studied bacteria, just two subunits, BcsA and BcsB, are necessary and sufficient for the formation of the polysaccharide chain in vitro. Other subunits – which differ among various taxa – affect the enzymatic activity and product yield in vivo by modulating expression of biosynthesis ...

  14. Novel transparent nanocomposite films based on chitosan and bacterial cellulose

    OpenAIRE

    Fernandes, Susana C. M.; Oliveira, Lúcia; Freire, Carmen S. R.; Silvestre, Armando J. D.; Neto, Carlos Pascoal; Gandini, Alessandro; Desbriéres, Jacques

    2009-01-01

    New nanocomposite films based on different chitosan matrices (two chitosans with different DPs and one water soluble derivative) and bacterial cellulose were prepared by a fully green procedure by casting a water based suspension of chitosan and bacterial cellulose nanofibrils. The films were characterized by several techniques, namely SEM, AFM, X-ray diffraction, TGA, tensile assays and visible spectroscopy. They were highly transparent, flexible and displayed better mechanical properties th...

  15. Morphological and Thermal Properties of Cellulose Nanofibrils Reinforced Epoxy Nanocomposites

    OpenAIRE

    Deniz Aydemir

    2015-01-01

    Epoxy resins have gained attention as important adhesives because they are structurally stable, inert to most chemicals, and highly resistant to oxidation. Different particles can be added to adhesives to improve their properties. In this study, cellulose nanofibrils (CNFs), which have superior mechanical properties, were used as the reinforcing agent. Cellulose nanofi brils were added to epoxy in quantities of 1 %, 2 % and 3 % by weight to prepare nanocomposites. Morphological characterizati...

  16. Reinforcement of bacterial cellulose aerogels with biocompatible polymers

    OpenAIRE

    Pircher, N.; Veigel, S.; Aigner, N; Nedelec, J. M.; Rosenau, T.; Liebner, F.

    2014-01-01

    Bacterial cellulose (BC) aerogels, which are fragile, ultra-lightweight, open-porous and transversally isotropic materials, have been reinforced with the biocompatible polymers polylactic acid (PLA), polycaprolactone (PCL), cellulose acetate (CA), and poly(methyl methacrylate) (PMMA), respectively, at varying BC/polymer ratios. Supercritical carbon dioxide anti-solvent precipitation and simultaneous extraction of the anti-solvent using scCO2 have been used as core techniques for incorporating...

  17. BcsA and BcsB form the catalytically active core of bacterial cellulose synthase sufficient for in vitro cellulose synthesis

    OpenAIRE

    Omadjela, Okako; Narahari, Adishesh; Strumillo, Joanna; Mélida, Hugo; Mazur, Olga; Bulone, Vincent; Zimmer, Jochen

    2013-01-01

    Cellulose is the most abundant biopolymer on Earth, primarily formed by vascular plants, but also by some bacteria. Bacterial extracellular polysaccharides, such as cellulose and alginate, are an important component of biofilms, which are multicellular, usually sessile, aggregates of bacteria. Biofilms exhibit a greater resistance to antimicrobial treatments compared with isolated bacteria and thus are a particular concern to human health. Cellulose synthases synthesize cellulose by polymeriz...

  18. Electron beam processing of sugar cane bagasse to cellulose hydrolysis

    International Nuclear Information System (INIS)

    Sugarcane bagasse has been considered as a substrate for single cell protein, animal feed, and renewable energy production. Sugarcane bagasse generally contain up to 45% glucose polymer cellulose, 40% hemicelluloses, and 20% lignin. Pure cellulose is readily depolymerised by radiation, but in biomass, the cellulose is intimately bonded with lignin, that protect it from radiation effects. The objective of this study is the evaluation of the electron beam irradiation as a pre-treatment to enzymatic hydrolysis of cellulose in order to facilitate its fermentation and improves the production of ethanol biofuel. Samples of sugarcane bagasse were obtained in sugar/ethanol Iracema Mill sited in Piracicaba, Brazil, and were irradiated using Radiation Dynamics Electron Beam Accelerator with 1.5 MeV energy and 37kW, in batch systems. The applied absorbed doses of the fist sampling, Bagasse A, were 20 kGy, 50 kGy, 100 kGy and 200 kGy. After the evaluation the preliminary obtained results, it was applied lower absorbed doses in the second assay: 5 kGy, 10 kGy, 20 kGy, 30 kGy, 50 kGy, 70 kGy, 100 kGy and 150 kGy. The electron beam processing took to changes in the sugarcane bagasse structure and composition, lignin and cellulose cleavage. The yield of enzymatic hydrolyzes of cellulose increase about 40 % with 30 kGy of absorbed dose. (author)

  19. Continous monitoring of cellulase action on microcrystalline cellulose

    Energy Technology Data Exchange (ETDEWEB)

    Kremer, S.M.; Wood, P.M. (Bristol Univ. (United Kingdom). Dept. of Biochemistry)

    1992-09-01

    Cellobiose oxidase from Phanerochaete chrysosporium was used for continuous monitoring of cellulase action on microcrystalline cellulose (Avicel). Two protocols are described, the parameter monitored being either the decline in electrode potential as ferricyanide is reduced or consumption of dioxygen. Most experiments used a commercial cellulase preparation from Trichoderma reesei and ferricyanide as acceptor. Within 1 min of an addition of cellulase, ferricyanide reduction reached a steady rate. This was converted into a rate of production of substrate for cellobiose oxidase, in [mu]mol.min[sup -1]. Experiments were conducted either with a constant concentration of cellulase and increasing Avicel, or with constant Avicel and increasing cellulase. Kinetic analysis of the experiments with constant cellulase indicated a K[sub m] of 4.8 [+-] 1.0 (g cellulose).1[sup -1], which was close to the value predicted from binding studies. The specific activity of the cellulase was measured as 375 [+-] 25 [mu]mol.(g cellulase)[sup -1].min[sup -1] in experiments with a high cellulose concentration, but was less than half this value when the cellulose was saturated with cellulase. The maximal rate of cellulose degradation was 9.6 [+-] 1.3 [mu]mol.(g cellulose)[sup -1].min[sup -1]. (orig.).

  20. Chemical and cellulose crystallite changes in Pinus radiata during torrefaction

    International Nuclear Information System (INIS)

    The impact on the chemical composition and changes to the cellulose crystallites in Pinus radiata wood chips under light (ca. 230 °C), mild (ca. 260 °C), and severe (290+ °C) torrefaction temperatures at a range of times was examined by solid state 13C CP-MAS and Dipolar Dephased NMR spectroscopy, TGA, and synchrotron based X-ray diffraction. Results indicated the decomposition of hemicelluloses into furfurals at the lowest temperature with little modification to the lignin or cellulose. De-polymerisation of lignin and cellulose was observed as torrefaction severity increased. The increased hydrophobicity under light and mild torrefaction severity was attributed to a combination of thermo-chemical modifications to hemicelluloses and lignin, along with cellulose crystal lattice changes. The observed decrease in hydrophobicity under severe torrefaction conditions was attributed to the degradation of cellulose crystallites. -- Highlights: •It was shown that the torrefaction process has an optimum temperature – time regime with respect to increased hydrophobicity. •Changes to the proportion of ether linkages in lignin after torrefaction were determined by solid state NMR. •Changes to cellulose crystallites after torrefaction were determined by X-ray diffraction. •We relate the hydrophobicity of torrefied wood to changes in wood polymer interactions