Stakeholder preferences towards the sustainable development of CDM projects: Lessons from biomass (rice husk) CDM project in Thailand

International Nuclear Information System (INIS)

Parnphumeesup, Piya; Kerr, Sandy A.

2011-01-01

This research applies both quantitative and qualitative methods to investigate stakeholder preferences towards sustainable development (SD) priorities in Clean Development Mechanism (CDM) projects. The CDM's contribution to SD is explored in the context of a biomass (rice husk) case study conducted in Thailand. Quantitative analysis ranks increasing the usage of renewable energy as the highest priority, followed by employment and technology transfer. Air pollution (dust) is ranked as the most important problem. Preference weights expressed by experts and local resident are statistically different in the cases of: employment generation; emission reductions; dust; waste disposal; and noise. Qualitative results, suggest that rice husk CDM projects contribute significantly to SD in terms of employment generation, an increase in usage of renewable energy, and transfer of knowledge. However, rice husk biomass projects create a potential negative impact on air quality. In order to ensure the environmental sustainability of CDM projects, stakeholders suggest that Thailand should cancel an Environmental Impact Assessment (EIA) exemption for CDM projects with an installed capacity below 10 MW and apply it to all CDM projects. - Highlights: → Stakeholders rank increasing the usage of renewable energy as the highest priority. → Biomass (rice husk) CDM projects create a potential negative impact on air quality. → Rice husk CDM projects cannot give an extra income to farmers. → Preference weights expressed by experts and local residents are statistically different.

The clean development mechanism (CDM) an international perspective and implications for the LAC region

International Nuclear Information System (INIS)

2004-08-01

This paper addresses activity a) an analysis of international CDM experiences and its potential contribution to the LAC region. The paper begins with a section describing the basic principles of the CDM and retrieves the lessons learned from the first two years of the CDM operation. This is followed by a more detailed review in section 2 of the on-going baseline and monitoring methodology approval process. In section 3, the development value of the CDM is explored. Section 4 describes the current CDM markets, while section 5 reviews the response of host countries to the CDM outside the LAC region. Section 6 describes the various capacity building programs established by Annex 1 countries to support the CDM. In each of the first 6 sections, implications for the LAC region are identified. Section 7 brings these conclusions together into a concise summary. (The author)

The clean development mechanisms. Ensuring its climate and development benefits

International Nuclear Information System (INIS)

Salter, L.; Volpi, L.

2000-01-01

The Clean Development Mechanism (CDM) potentially offers a major opportunity for catalysing technology leapfrogging in the South. A CDM which delivers genuine incentives for investment in clean energy technologies and innovative energy solutions could become the first step in shifting towards a development model based on the delivery of sustainable energy services. Conversely, according to a recent analysis for WWF, a CDM regime which allows easy credits for conventional technologies will merely serve to reinforce the current trend towards increased carbon dependency in the South, at the same time as it allows industrialised countries to continue to increase greenhouse gas emissions at home

CDM Country Guides

International Nuclear Information System (INIS)

2005-01-01

Under the Integrated Capacity Strengthening for the Clean Development Mechanism (ICS-CDM) programme, IGES presents the CDM Country Guides, a series of manuals on CDM project development for Cambodia, China, India, Indonesia, the Philippines, and Thailand. These guidebooks aim at facilitating CDM project developments in Asia by providing essential information to both project developers and potential investors. Chapter 1, Introduction, is a summary of issues that developers and investors in CDM projects should be aware of. Includes tips for readers to effectively use the guidebook to find specific information. Chapter 2, Country Profile, comprises a profile that provides a broad picture of the country, including social, economic, and political information, as well as an overview of the country's energy situation, which is important for project development and investment. Chapter 3, The CDM Project Cycle, gives an explanation of the general CDM project cycle, which includes identifying a project, issuance of carbon credits, requirements, and stakeholders for each process. Chapter 4, Possible CDM Projects in the Country, is an overview of the country's potential resources and sectoral or project type categories that hold potential for CDM projects. Chapter 5, Government Authorities, gives a comprehensive picture of the CDM-related institutional framework and its inter-organisational relationships. Chapter 6, CDM Project Approval Procedures and Requirements Steps, informs about obtaining project approval and its requirements (e.g., country-specific provisions on additionality, sustainable development criteria, and environmental impact assessment) in the host country. Chapter 7, Laws and Regulations, is an overview of basic investment-related laws, environmental and property law, and sector-specific regulations relevant to CDM project activities. Chapter 8, Fiscal and Financing Issues, gives practical information on the financial market in the host country (both

Clean development mechanism: Perspectives from developing countries

Energy Technology Data Exchange (ETDEWEB)

Sari, Agus P.; Meyers, Stephen

1999-06-01

This paper addresses the political acceptability and workability of CDM by and in developing countries. At COP-3 in Kyoto in 1997, the general position among developing countries changed from strong rejection of joint implementation to acceptance of CDM. The outgrowth of CDM from a proposal from Brazil to establish a Clean Development Fund gave developing countries a sense of ownership of the idea. More importantly, establishing support for sustainable development as a main goal for CDM overcame the resistance of many developing countries to accept a carbon trading mechanism. The official acceptance of CDM is not a guarantee of continued acceptance, however. Many developing countries expect CDM to facilitate a substantial transfer of technology and other resources to support economic growth. There is concern that Annex I countries may shift official development assistance into CDM in order to gain carbon credits, and that development priorities could suffer as a result. Some fear that private investments could be skewed toward projects that yield carbon credits. Developing country governments are wary regarding the strong role of the private sector envisioned for CDM. Increasing the awareness and capacity of the private sector in developing countries to initiate and implement CDM projects needs to be a high priority. While private sector partnerships will be the main vehicle for resource transfer in CDM, developing country governments want to play a strong role in overseeing and guiding the process so that it best serves their development goals. Most countries feel that establishment of criteria for sustainable development should be left to individual countries. A key issue is how CDM can best support the strengthening of local capacity to sustain and replicate projects that serve both climate change mitigation and sustainable development objectives.There is support among developing countries for commencing CDM as soon as possible. Since official commencement must

On the contribution of labelled Certified Emission Reductions to sustainable development: A multi-criteria evaluation of CDM projects

International Nuclear Information System (INIS)

Nussbaumer, Patrick

2009-01-01

The Clean Development Mechanism (CDM) has a twofold objective, to offset greenhouse gas emissions and to contribute to sustainable development in the host country. The contribution to the latter objective seems marginal in most CDM activities. Also, CDM activities are unevenly spread among developing countries. In response to these concerns, initiatives with the objective of promoting CDM projects with broad local sustainable development dividends have been launched, such as the Gold Standard and the Community Development Carbon Fund. The Gold Standard label rewards best-practice CDM projects while the Community Development Carbon Fund focuses on promoting CDM activities in underprivileged communities. Using a multi-criteria method, the potential contribution to local sustainable development of those CDM projects with particular attributes is compared with ordinary ones. This evaluation suggests that labelled CDM activities tend to slightly outperform comparable projects, although not unequivocally

Clean Development Mechanism and Least Developed Countries: Changing the Rules for Greater Participation

DEFF Research Database (Denmark)

De Lopez, Thanakvaro Thyl; Tin, Ponlok; Iyadomi, Keisuke

2009-01-01

The clean development mechanism (CDM) of the Kyoto Protocol is designed not only to mitigate greenhouse gas emissions (GHG) but also to contribute locally to sustainable development. As a market-based mechanism, CDM has the potential to channel private investments into development activities...... with economic, social, and environmental benefits. Unfortunately, investments have tended to flow where CDM activities provide higher returns with limited economic and political risks, that is, outside of least developed countries (LDCs). To date, only a handful of LDCs have been able to participate in the CDM...

Trends in renewable energy strategy development and the role of CDM in Bangladesh

International Nuclear Information System (INIS)

Noim Uddin, Sk; Taplin, Ros

2009-01-01

This article analyses and discusses trends in renewable energy strategy development in Bangladesh and the prospective role of the clean development mechanism (CDM) under the Kyoto Protocol. Use of renewables for electricity generation results in less greenhouse gas emissions compared with fossil fuel energy systems and often offers additional synergistic benefits. Despite the large potential for development of renewable energy sources in Bangladesh, currently their contribution to electricity generation remains insignificant. Existing policies and programs on renewable energy in Bangladesh are reviewed in relation to the specific requirements needed for CDM. A number of barriers are identified that impede the implementation of the CDM mechanism. Overall, it is recommended that more appropriate energy strategies, including a new national renewable energy strategy, need to be formulated and implemented and more suitable institutional settings need to be provided to promote energy sustainability for Bangladesh. Also, the suggestion is made that incorporation of objectives for CDM promotion in the new national renewable energy strategy to tie in with Bangladesh's CDM strategy should assist in advancement of renewables

Clean development mechanism projects and portfolio risks

International Nuclear Information System (INIS)

Matsuhashi, Ryuji; Fujisawa, Sei; Mitamura, Wataru; Momobayashi, Yutaka; Yoshida, Yoshikuni

2004-01-01

Clean development mechanism (CDM) is expected to facilitate technology transfer from developed to developing countries as well as to economically reduce greenhouse gas emissions. In this article, we explore effective institutions to activate CDM projects. For this purpose, we have estimated internal rate of return (IRR) and other indicators on profitability for 42 CDM or JI projects, taking account of volatilities in the price of certified emission reductions (CER). As a result of Monte Carlo simulations, expected values and standard deviations in the IRR of the projects were quantitatively shown. Then we evaluated various risks in CDM, concluding that diversification of investment is an effective way to suppress these risks. Therefore securitization of CDM finance is proposed as a means of facilitating the diversification of investment. Namely, we present the concept of a CDM bond, which is a project bond with CER. We also investigated the role of governments to suppress risks in CDM. Referring to CERUPT, initiated by the Netherlands' government, the institution of 'insured CERUPT' is proposed to suppress downside risks in the IRR of the projects. We concluded that it is possible to make CDM projects viable by the 'insured CERUPT' and CDM bond

Guidebook to financing CDM projects

Energy Technology Data Exchange (ETDEWEB)

Kamel, S.

2007-07-01

One of the challenges facing Clean Development Mechanism (CDM) projects today is their limited ability to secure financing for the underlying greenhouse gas emission reduction activities, particularly in the least developed countries. Among the key reasons for this is the fact that most financial intermediaries in the CDM host countries have limited or no knowledge of the CDM Modalities and Procedures. Moreover, approaches, tools and skills for CDM project appraisal are lacking or are asymmetrical to the skills in comparable institutions in developed countries. Consequently, developing country financial institutions are unable to properly evaluate the risks and rewards associated with investing or lending to developers undertaking CDM projects, and therefore have, by-and-large, refrained from financing these projects. In addition, some potential project proponents lack experience in structuring arrangements for financing a project. This Guidebook - commissioned by the UNEP Risoe Centre as part of the activities of the Capacity Development for CDM (CD4CDM) project (http://www.cd4cdm.org) - addresses these barriers by providing information aimed at both developing country financial institutions and at CDM project proponents. It should be noted that while the Guidebook was developed particularly with the CDM in mind, most sections will also be relevant for Joint Implementation (JI) project activities. For more detailed information on JI modalities and procedures please consult: http://ji.unfccc.int The purpose of this Guidebook is two-fold: 1) To guide project developers on obtaining financing for the implementation of activities eligible under the CDM; and 2) To demonstrate to developing country financial institutions typical approaches and methods for appraising the viability of CDM projects and for optimally integrating carbon revenue into overall project financing. The target audiences for the Guidebook are therefore, primarily: 1) CDM project proponents in

Diagnosis of social and environmental evaluation of CDM (Clean Development Mechanism) projects; Diagnostico da sustentabilidade socioambiental nas atividades de projetos candidatos ao MDL (Mecanismo de Desenvolvimento Limpo)

Energy Technology Data Exchange (ETDEWEB)

Ziliotto, Marco Aurelio B.; Villa, Alessandra T.; Padilha, Simone L. Vieira; Canaverde, Patricia Margue [Instituto Ecoplan, PR (Brazil); Sanqueta, Carlos Roberto [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

2004-07-01

The Clean Development Mechanism (CDM) contributes to sustainability and to sustainable development in those countries where CDM projects are developed and helps the countries from Annex I to achieve their reduction targets to Greenhouse Gases. This paper presents a proposal of a social and environmental sustainability diagnosis making use of a tool called Social and Environmental Evaluation Matrix - MADSA{sup R}. Its purpose is to establish and measure appropriate sustainable indicators to evaluate projects to ensure development benefits of CDM projects in host countries in consistency with Annex I countries developmental goals. MADSA{sup R} methodology allows a definition of a social and environmental baseline to MDL projects, and provides information to any interested group of people, from stockholders to local community; showing its results. It allows a greater clients', stockholders' and investor's trust as it measures the development so it makes possible the diagnosis and the comparison between all phases of the project. It also contributes to a continuous improvement through the participation of benefit groups in the diagnosis. Besides being an evaluation method and a management tool, this proposal looks for being a reference as an indicator pattern that evaluates the sustainable social and environmental development of CDM projects. (author)

Viability of biofuel use in CDM (Clean Development Mechanisms) projects; Viabilidade do uso do biodiesel para projetos de MDL (Mecanismo de Desenvolvimento Limpo)

Energy Technology Data Exchange (ETDEWEB)

Fortes, Julio; Lima, Luciana Santana de [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)

2008-07-01

Biodiesel, renewable energy source, has been adopted by several countries as a possible substitute for fossil fuels. Brazil, by its own, included oil and fat derived biofuel in its energetic matrix through National Politics for Biofuel Use and Production (NPBUP), issue in Law n. 11.097 of 01/13/2005. Many studies demonstrate the contribution of biofuel for Greenhouse Gases reduction, what turns projects using it into possible candidates for Clean Development Mechanism (CDM), instrument described in Kyoto Protocol. With purpose of studying the Brazilian potentiality of the insertion of biofuel into CDM projects, this report approaches many aspects related to CDM, as well the terms for being accepted as so. Through bibliographic review were listed the possibilities and the restraints for including biofuel in carbon market resulted, principally, by the obligation of its use; what goes against the principle of voluntary, for seen in the Protocol. I concluded analyzing the advantages of biofuel comparatively to environmental issues, emphasizing the necessity of making viable its entrance into carbon credits market. (author)

Wind power projects in the CDM: Methodologies and tools for baselines, carbon financing and substainability analysis[CDM=Clean Development Mechanism

Energy Technology Data Exchange (ETDEWEB)

Ringius, L.; Grohnheit, P.E.; Nielsen, L.H.; Olivier, A.L.; Painuly, J.; Villavicencio, A.

2002-12-01

The report is intended to be a guidance document for project developers, investors, lenders, and CDM host countries involved in wind power projects in the CDM. The report explores in particular those issues that are important in CDM project assessment and development - that is, baseline development, carbon financing, and environmental sustainability. It does not deal in detail with those issues that are routinely covered in a standard wind power project assessment. The report tests, compares, and recommends methodologies for and approaches to baseline development. To present the application and implications of the various methodologies and approaches in a concrete context, Africa's largest wind farm-namely the 60 MW wind farm located in Zafarana, Egypt- is examined as a hypothetical CDM wind power project The report shows that for the present case example there is a difference of about 25% between the lowest (0.5496 tCO2/MWh) and the highest emission rate (0.6868 tCO{sub 2}/MWh) estimated in accordance with these three standardized approaches to baseline development according to the Marrakesh Accord. This difference in emission factors comes about partly as a result of including hydroelectric power in the baseline scenario. Hydroelectric resources constitute around 21% of the generation capacity in Egypt, and, if excluding hydropower, the difference between the lowest and the highest baseline is reduced to 18%. Furthermore, since the two variations of the 'historical' baseline option examined result in the highest and the lowest baselines, by disregarding this baseline option altogether the difference between the lowest and the highest is reduced to 16%. The ES3-model, which the Systems Analysis Department at Risoe National Laboratory has developed, makes it possible for this report to explore the project-specific approach to baseline development in some detail. Based on quite disaggregated data on the Egyptian electricity system, including the wind

The Clean Development Mechanism and Technology Transfer

DEFF Research Database (Denmark)

Aggarwal, Aradhna

2017-01-01

This study assesses the impact of the Clean Development Mechanism (CDM) on the transfer of clean technology in India. The reason this study is unique is because firstly, it adopts an outcome-oriented approach to define ‘technology transfer’, which means that technology transfer occurs if firms...

Assessing technology transfer in the Clean Development Mechanism

OpenAIRE

Cools, Sara Lena Yri

2007-01-01

This paper presents an operational definition of technology transfer, to be applied in studies of technology transfer in projects under the Kyoto Protocol’s Clean Development Mechanism (CDM). Although the CDM has never been given an explicit mandate for transferring technologies, its contribution in this respect has both been hoped for and exacted. The discussions of technology transfer in CDM projects are however blurred by widely varying conceptions of what technology transfer is. Qu...

Is the Clean Development Mechanism Effective for Emission Reductions?

DEFF Research Database (Denmark)

Tarp, Finn; Huang, Yongfu; He, Jingjing

2014-01-01

with great challenges, given the wide divide between developed and developing nations. Against this background, comprehensive evaluations of the effectiveness of Kyoto market‐based mechanisms such as the Clean Development Mechanism (CDM) in terms of mitigating human‐induced climate change are urgently needed...... reductions for 60 CDM host countries over the period 2005–2010, using a newly developed econometric method for dynamic panel data models associated with the X‐differencing procedure. Our results provide evidence in support of a decline in CO 2 emissions in CDM host countries. We conclude...

Determinants and outcome of a Clean Development Mechanism in Malaysia

DEFF Research Database (Denmark)

Govindan, Kannan; Zainuddin, Zainorfarah Binti; Zailani, Suhaiza

2017-01-01

The Clean Development Mechanism (CDM) enables transferring technology from developed countries to developing countries, such as Malaysia, and simultaneously promotes sustainable growth. Although this has been proven, the contribution of Malaysian companies in CDM projects is low. Therefore......, this study has been aimed at investigating the determinants of CDM adoption and its impact on companies' performances. Data were gathered by surveying 91 companies in the energy, agriculture, and forestry sectors in Malaysia implementing CDM projects. The data were analysed using the partial least squares...... technique. The results show that environmental regulations, competitiveness, and financial benefits have a positive impact on CDM implementation. Additionally, this study reported a significant positive effect of CDM implementation on economic performance. This paper extends the knowledge...

Can CDM bring technology transfer to China?-An empirical study of technology transfer in China's CDM projects

International Nuclear Information System (INIS)

Wang Bo

2010-01-01

China has undertaken the greatest number of projects and reported the largest emission reductions on the global clean development mechanism (CDM) market. As technology transfer (TT) was designed to play a key role for Annex II countries in achieving greenhouse gas emission reductions, this study examines various factors that have affected CDM and TT in China. The proportion of total income derived from the certified emissions reductions (CER) plays a key role in the project owners' decision to adopt foreign technology. Incompatibility of CDM procedures with Chinese domestic procedures, technology diffusion (TD) effects, Chinese government policy and the role of carbon traders and CDM project consultants all contribute to the different degrees and forms of TT. International carbon traders and CDM consultants could play a larger role in TT in China's CDM projects as investors and brokers in the future.

CDM: Taking stock and looking forward

International Nuclear Information System (INIS)

Ellis, Jane; Winkler, Harald; Corfee-Morlot, Jan; Gagnon-Lebrun, Frederic

2007-01-01

The Kyoto Protocol's clean development mechanism (CDM) was established in 1997 with the dual purposes of assisting non-Annex I Parties in achieving sustainable development and assisting Annex I Parties in achieving compliance with their quantified greenhouse gas (GHG) emission commitments. This paper looks at the development of the CDM portfolio as well as achievements of the CDM to date in the context of wider private and public flows of investment into developing countries. These achievements include the development of 325 (by May 2005) proposed CDM projects which are together expected to generate more than 79 Mt CO 2 -eq credits/year during 2008-2012, increasing awareness of climate change mitigation options among possible investors and others that may facilitate transactions (i.e. governments), and the strengthening of climate-relevant institutions within countries. The paper also draws lessons from this experience to date, and outlines what changes may be needed to transform the CDM concept to a broader scale after the end of the first commitment period in 2012

CDM and JI in View of the Sustainability Debate

NARCIS (Netherlands)

Schoot Uiterkamp, A.J.M.

2001-01-01

Clean Development Mechanism (CDM), Joint Implementation (JI) and emissions trading are the three flexible instruments incorporated in the Kyoto Protocol. This paper presents a critical assessment of the sustainability of energy-related technology innovation and transfer in the context of CDM and JI.

Potential of CDM in renewable projects in Malaysia

International Nuclear Information System (INIS)

Kannan, K.S.

2006-01-01

The Clean Development Mechanism (CDM) is a market-based tool introduced under the Kyoto Protocol to assist developing countries achieve their sustainable development objectives and at the same time provide opportunities for developed countries to meet their greenhouse gas targets cost-effectively. Projects based on renewable sources are eligible under the CDM. Such projects are also in line with the development of the fifth fuel option in Malaysia. The paper assesses the potential of CDM in renewable energy projects in particular the grid-connected biomass power projects under the Small Renewable Energy Power (SREP) Programme. The criteria (both national and international) that have to be met for the renewable energy projects to obtain approval as a CDM projects is outlined. The additional CDM activities are elaborated. The methodology for the determination of reduction in carbon dioxide emissions is provided. The paper further investigates the impact of CDM in the promotion of renewable energy projects in Malaysia

The promotion of sustainable development in China through the optimization of a tax/subsidy plan among HFC and power generation CDM projects

International Nuclear Information System (INIS)

Resnier, Martin; Wang, Can; Du, Pengfei; Chen, Jining

2007-01-01

China is expected to reach record growth by 2020 in the energy sector by at least doubling its electricity generation capacity. In order to protect the environment and foster economic development, China will greatly benefit from transfers of state-of-the-art power generation technologies through international agreements such as the Clean Development Mechanism (CDM). However, a buyer-driven carbon market and a highly competitive environment due to more cost-effective projects attribute to China's need to achieve a balance between sustainability and profitability for CDM projects implemented in China. In the CDM Tax/Subsidy Optimization Model (CDMTSO Model) here developed, a sustainable development assessment method evaluates the CDM projects' economic and environmental benefits and an optimization program returns tax/subsidy rates at which the greatest number of CDM technologies becomes viable and where 'better' CDM projects can be the most profitable, bringing China's development on a more sustainable path. The results show that the CDMTSO Model brings the sustainable CDM projects' Internal Rate of Return closed to 10%. If a discount rate of 9% is considered, it allows three clean energy technologies (natural gas combined cycle, wind energy, and hydropower) to become economically viable and the environmental costs avoided are increased by 37%

The Clean Development Mechanism and neglected environmental technologies

International Nuclear Information System (INIS)

Kim, Jung Eun; Popp, David; Prag, Andrew

2013-01-01

The Clean Development Mechanism (CDM) provides an institutional framework for developed countries to support projects that reduce greenhouse gas emissions in developing countries. Are the technologies promoted those most needed by the recipient countries? We address this question by first reviewing Technology Needs Assessments prepared by developing countries, and then comparing the stated needs to the technologies most frequently promoted via CDM. While there appears to be a good match between requested technologies and those used in CDM, desired technologies such as solar energy for remote locations, biofuels, improved cooking stoves, and efficient lighting appear “neglected” by CDM. Nonetheless, a review of costs for these technologies suggests that many could be cost effective for developing countries. For projects requiring wide dispersal of household items, such as cooking stoves or lighting, the administrative burdens of CDM provide a hurdle. In other cases, difficulties quantifying the ancillary benefits of these projects hinder the promotion of these technologies. We conclude with possible explanations for why these technologies are neglected and suggestions for future research. - Highlights: ► We identify technologies desired by developing countries but not provided via CDM. ► Solar PV is neglected due to high costs. ► The CDM process provides a hurdle for improved cooking stoves and efficient lighting. ► Implications for CDM and climate policy are discussed

African perspectives on the clean development mechanism

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

The papers, which are all written from an African perspective, are an important contribution to the debate surrounding the relevance and applicability of the Clean Development Mechanism in Africa. In addition to sector-specific discussions on the prospects for CDM in the energy, transport, industry and forestry sectors, various authors have attempted to tackle complex issues related to the instituional design of CDM, its mode of operation, participatory implementation and methodological questions such as baselines and additionality. (au)

CDM in sub-Saharan Africa and the prospects of the Nairobi Framework Initiative

NARCIS (Netherlands)

Byigero, Alfred D.; Clancy, Joy S.; Skutsch, Margaret

2010-01-01

To what extent can capacity-building activities under the Nairobi Framework (NF) Initiative overcome barriers to the Clean Development Mechanism (CDM) in sub-Saharan Africa and, in particular, the East African region? The level of CDM penetration into sub-Saharan Africa is compared with CDM market

Success Factors for Clean Development Mechanism Implementation in Malaysia

Directory of Open Access Journals (Sweden)

Say Keat Ooi

2013-09-01

Full Text Available The Clean Development Mechanism (CDM, established under the Kyoto Protocol, is one of the market-based mechanisms developed to assist industrialized countries mitigate greenhouse gas (GHG emissions, achieve emission reduction targets, and at the same time promote sustainable development in developing countries. The CDM, which provides flexibility and costeffectiveness in meeting GHG emission reduction targets, has captured interest globally. CDM implementation is expected to generate benefits, give developing countries a sense of ownership, and share the global load in tackling global warming and climate change. However, CDM implementation faces several complications. The successful participation of developing countries in emission reduction projects presents ongoing challenges, which inhibit their drive towards sustainable development goals. Through a comprehensive review of the literature and theoretical analysis, several factors have been identified as significant to successful CDM implementation in Malaysia. These success factors, which include regulation and a legal framework, competitive advantage, green supply chain, ethical values, financial benefits, and technology transfer, are presented and the importance of each factor is discussed.

Understanding the CDM's contribution to technology transfer

International Nuclear Information System (INIS)

Schneider, Malte; Holzer, Andreas; Hoffmann, Volker H.

2008-01-01

Developing countries are increasingly contributing to global greenhouse gas emissions and, consequently, climate change as a result of their rapid economic growth. In order to reduce their impact, the private sector needs to be engaged in the transfer of low-carbon technology to those countries. The Clean Development Mechanism (CDM) is currently the only market mechanism aimed at triggering changes in the pattern of emissions-intensive activities in developing countries and is likely to play a role in future negotiations. In this paper, we analyse how the CDM contributes to technology transfer. We first develop a framework from the literature that delineates the main factors which characterise technology transfer. Second, we apply this framework to the CDM by assessing existing empirical studies and drawing on additional expert interviews. We find that the CDM does contribute to technology transfer by lowering several technology-transfer barriers and by raising the transfer quality. On the basis of this analysis, we give preliminary policy recommendations

Accelerating the implementation of the clean development mechanism in South African industry

Directory of Open Access Journals (Sweden)

G Little

2014-05-01

Full Text Available One of the responses to the threat of global warming is the Kyoto Protocol and the associated Clean Development Mechanism (CDM to reduce greenhouse gases. South Africa is an ideal country for the implementation of industrial CDM projects, yet lags behind many other countries. This qualitative research determines the factors that cause South Africa to lag other developing countries in the implementation of industrial CDM projects and the interventions that will have the most impact on accelerating implementation. The research involved interviews with 30 experts involved in the South African CDM process. The results identify the factors perceived to be facilitating and inhibiting the use of CDM opportunities and a framework for CDM practitioners to develop an implementation strategy within South African industry is established.

A data support infrastructure for Clean Development Mechanism forestry implementation : an inventory perspective from Cameroon

NARCIS (Netherlands)

Minang, P.A.; McCall, M.K.; Skutsch, Margaret M.; Verplanke, J.J.

2007-01-01

Clean Development Mechanism (CDM) forestry project development requires highly multi-disciplinary and multiple-source information that can be complex, cumbersome and costly to acquire. Yet developing countries in which CDM projects are created and implemented are often data poor environments and

As if Kyoto mattered: The clean development mechanism and transportation

International Nuclear Information System (INIS)

Christopher Zegras, P.

2007-01-01

Transportation is a major source of greenhouse gas (GHG) emissions and the most rapidly growing anthropogenic source. In the future, the developing world will account for the largest share of transport GHG increases. Four basic components drive transportation energy consumption and GHG emissions: activities (A), mode share (S), fuel intensity (I) and fuel choice (F) (ASIF). Currently, the Kyoto Protocol's clean development mechanism (CDM) serves as the main international market-based tool designed to reduce GHG emissions from the developing world. Theoretically, the CDM has the dual purpose of helping developing countries achieve 'sustainable development' goals and industrialized countries meet their Kyoto emissions reduction commitments. This paper reviews overall CDM activities and transportation CDM activities to date and then presents findings from three case studies of transportation CDM possibilities examined with the ASIF framework in Santiago de Chile. The analysis suggests that bus technology switch (I) provides a fairly good project fit for the CDM, while options aimed at inducing mode share (S) to bicycle, or modifying travel demand via land use changes (ASI) face considerable challenges. The implications of the findings for the CDM and the 'post-Kyoto' world are discussed

Global and Regional Impacts of the Clean Development Mechanism

International Nuclear Information System (INIS)

Wang, Shunli; De Groot, H.L.F.; Nijkamp, P.; Verhoef, E.T.

2009-05-01

Climate change is a serious concern worldwide. Policy research on climate change in the past decades has largely focused on applied modelling exercises. However, the implications of specific policy strategies such as the clean development mechanism (CDM) for global and regional economic and environmental developments has received relatively little attention. This is partly caused by the complexities of modelling an instrument like CDM. By using and modifying the GTAP-E modelling system (GTAP stands for Global Trade Analysis Project), this paper sets out to trace the combined economic and environmental impacts of CDM policies. Particular emphasis is placed on technology transfer induced by alternative CDM policies. Specific attention is devoted to the possible negative consequences of non-participation of the USA in the global coalition, and the associated distributional impacts world-wide.

Global and Regional Impacts of the Clean Development Mechanism

Energy Technology Data Exchange (ETDEWEB)

Wang, Shunli; De Groot, H.L.F.; Nijkamp, P.; Verhoef, E.T. [VU University, Amsterdam (Netherlands)

2009-05-15

Climate change is a serious concern worldwide. Policy research on climate change in the past decades has largely focused on applied modelling exercises. However, the implications of specific policy strategies such as the clean development mechanism (CDM) for global and regional economic and environmental developments has received relatively little attention. This is partly caused by the complexities of modelling an instrument like CDM. By using and modifying the GTAP-E modelling system (GTAP stands for Global Trade Analysis Project), this paper sets out to trace the combined economic and environmental impacts of CDM policies. Particular emphasis is placed on technology transfer induced by alternative CDM policies. Specific attention is devoted to the possible negative consequences of non-participation of the USA in the global coalition, and the associated distributional impacts world-wide.

Integrating ecological restoration into CDM forestry projects

International Nuclear Information System (INIS)

Ma, Maohua; Haapanen, Toni; Singh, Ram Babu; Hietala, Reija

2014-01-01

Highlights: • Concerns and issues in sustainability of CDM forestry projects are reviewed. • Ecological restoration is suggested to be integrated in the CDM framework. • As an ecosystem supporting service, soil restoration on degraded land is of primary importance. • Regenerating forests naturally rather than through monoculture plantations is suggested. • Potential social impacts of ecological restoration are discussed. - Abstract: The Clean Development Mechanism (CDM) is proposed to reduce greenhouse gas emissions and promote sustainable development. CDM forestry projects should contribute to mitigation of climate change through afforestation and reforestation (A/R) activities on degraded land in developing countries. However, like other types of CDM projects, the forestry projects have encountered a number of concerns and critiques. Appropriate approaches and concrete aims to achieve long-term sustainability have been lacking, and reforms have therefore been called for. The aims of this paper are to examine the published information relevant to these concerns, and frame appropriate approaches for a more sustainable CDM. In this review, as a first step to tackle some of these issues, ecological restoration is suggested for integration into the CDM framework. Essentially, this involves the restoration of ecosystem supporting service (soil restoration), upon which forests regenerate naturally rather than establishing monoculture plantations. In this way, forestry projects would bring cost-effective opportunities for multiple ecosystem services. Potential approaches, necessary additions to the monitoring plans, and social impacts of ecological restoration in CDM projects are discussed

How could developing countries participate in climate change prevention: The Clean Development Mechanism and beyond

International Nuclear Information System (INIS)

Cavard, D.; Cornut, P.; Menanteau, P.

2001-01-01

Refusal of developing countries to commit themselves to the implementation of climate change agreements on the grounds that their cumulated emissions would have little impact on climate change, combined with their need for increase in energy consumption to meet their economic development needs, has been one of the stumbling blocks to agreement since the beginning of climate change negotiations. For these and a variety of other reasons the Clean Development Mechanism (CDM) is important for industrialized and developing countries alike since it has the promise of benefiting both parties: industrialized countries benefit from low cost emission reductions, while CDM will stimulate economic development in developing countries. This paper examines the rules of the Clean Development Mechanism in order to validate project additions (as yet unresolved), and its possible consequences on the effectiveness and the scope of the mechanism. Also examined are the three basic approaches to CDM implementation (bilateral, unilateral. multilateral), the different reactions of major developing country groups to the structure of the mechanism, and the possibilities of widening the scope of action of the CDM to include sectoral and program-based aspects. In this context, 'voluntary, non-binding' emission commitments, establishment of a reference scenario for developing countries, related concerns about sustainable development, national sovereignty issues, equity in funding and vulnerability, are some of the potential issues highlighted. 33 footnotes

How to Improve the Likelihood of CDM Approval?

DEFF Research Database (Denmark)

Brandt, Urs Steiner; Svendsen, Gert Tinggaard

2014-01-01

How can the likelihood of Clean Development Mechanism (CDM) approval be improved in the face of institutional shortcomings? To answer this question, we focus on the three institutional shortcomings of income sharing, risk sharing and corruption prevention concerning afforestation/reforestation (A....../R). Furthermore, three main stakeholders are identified, namely investors, governments and agents in a principal-agent model regarding monitoring and enforcement capacity. Developing countries such as West Africa have, despite huge potentials, not been integrated in A/R CDM projects yet. Remote sensing, however...

Canada's potential role in the Clean Development Mechanism

International Nuclear Information System (INIS)

Pape-Salmon, A.

2000-01-01

The role that Canada might play in the Kyoto Protocol's Clean Development Mechanism (CDM) is discussed. The CDM prescribes the way in which industrialized countries could create emission reduction credits for greenhouse gas emission reduction projects in developing countries which, in turn they could use to meet their own commitments and possibly reduce their cost of compliance with the Kyoto Protocol. While Canada does not see itself as a CDM project investor, it strongly supports private sector involvement in the CDM and believes that it has a role to play in assisting CDM investments by the Canadian private sector by facilitating desirable outcomes via international negotiations on the rules and modalities for the CDM which would minimize transaction costs; give prominence to aspects that Canada recognizes as necessary precursors to mobilizing private sector involvement in CDM activities; maximize the flexibility for use of the CDM; allow for conversion of credits between different Kyoto Mechanisms; allow for the certification of emissions sequestration from sinks; and maximize the environmental and sustainable development benefits of CDM projects. Canada also supports, along with the other members of the 'Umbrella group', the fewest possible restrictions and significant autonomy to the private sector to implement a variety of project activities in developing countries. This report provides a detailed examination of the Canadian government's views on the CDM, Canada's participation in international emission reduction projects, the factors that drive Canadian demand for greenhouse gas emission reduction offsets and the potential demand for CDM offsets, Canada's greenhouse gas emission inventory and projections, the approach of Canadian corporate investors in the CDM and Canadian technology and expertise in greenhouse gas emission reductions. Various appendices to the report contain further details on a number of cooperation agreements between Canada and other

Can the Clean Development Mechanism attain both cost-effectiveness and sustainable development objectives?

International Nuclear Information System (INIS)

Kolshus, Hans H; Vevatne, Jonas; Torvanger, Asbjoern; Aunan, Kristin

2001-06-01

The Clean Development Mechanism (CDM), as defined in the Kyoto Protocol, has two objectives: to promote sustainable development in host developing countries, and to improve global cost-effectiveness by assisting developed countries in meeting their Kyoto targets. The aim of this paper is to explore the background of the CDM and discuss to what extent its current design allows it to achieve its dual objective. The first part of the paper is a literature review that includes descriptions of the flexibility mechanisms under the Kyoto Protocol; the CDM's market potential, and the issues of cost-effectiveness and sustainable development. In the second part of the paper, we discuss to what extent there is a conflict between cost-effectiveness and sustain ability, and whether the two objectives of the CDM can be achieved simultaneously. We develop a set of indicators to evaluate non-carbon benefits of CDM projects on the environment, development, and. equity, and show how these indicators can be used in practice by looking at case studies of CDM project candidates in the energy sector from Brazil and China. We demonstrate that for some CDM projects there is a trade-off between cost-effectiveness, in terms of a low quota price, and a high score on sustain ability indicators. We have reason to believe that the size of the CDM market in some studies is over-estimated since transaction costs and the challenge of promoting sustainable development are not fully accounted for. Also, we find that the proposed set of indicators can be a necessary tool to assure that sustain ability impacts of CDM projects are taken into consideration. (author)

Can the Clean Development Mechanism attain both cost-effectiveness and sustainable development objectives?

Energy Technology Data Exchange (ETDEWEB)

Kolshus, Hans H; Vevatne, Jonas; Torvanger, Asbjoern; Aunan, Kristin

2001-06-01

The Clean Development Mechanism (CDM), as defined in the Kyoto Protocol, has two objectives: to promote sustainable development in host developing countries, and to improve global cost-effectiveness by assisting developed countries in meeting their Kyoto targets. The aim of this paper is to explore the background of the CDM and discuss to what extent its current design allows it to achieve its dual objective. The first part of the paper is a literature review that includes descriptions of the flexibility mechanisms under the Kyoto Protocol; the CDM's market potential, and the issues of cost-effectiveness and sustainable development. In the second part of the paper, we discuss to what extent there is a conflict between cost-effectiveness and sustain ability, and whether the two objectives of the CDM can be achieved simultaneously. We develop a set of indicators to evaluate non-carbon benefits of CDM projects on the environment, development, and. equity, and show how these indicators can be used in practice by looking at case studies of CDM project candidates in the energy sector from Brazil and China. We demonstrate that for some CDM projects there is a trade-off between cost-effectiveness, in terms of a low quota price, and a high score on sustain ability indicators. We have reason to believe that the size of the CDM market in some studies is over-estimated since transaction costs and the challenge of promoting sustainable development are not fully accounted for. Also, we find that the proposed set of indicators can be a necessary tool to assure that sustain ability impacts of CDM projects are taken into consideration. (author)

Analysis of the partnership network in the clean development mechanism

International Nuclear Information System (INIS)

Kang, Moon Jung; Park, Jihyoun

2013-01-01

The clean development mechanism (CDM) is a global collaborative action proposed at the Kyoto Protocol in response to climate change issues. The CDM contributes to cost-efficient reduction of greenhouse gas emissions in industrialized countries and promotes sustainable development in developing countries. Its fundamental framework is based on partnerships between industrialized and developing countries. This study employs social network analysis to investigate the dynamics of the partnership networks observed in 3816 CDM projects registered in the database of the United Nations Framework Convention on Climate Change over the period of 2005 to 2011. Our three main findings can be summarized as follows. First, the CDM partnership network is a small world; however, its density tends to decrease as the number of participants for a CDM project decreases. Second, the partnership networks’ leading groups tend to shift from partner countries into host countries. Third, a host country that pursues more partnership-based projects takes better control of resources and knowledge-flow in the ego-network formed around that country, and can thus better utilize global resources for its CDM projects. - Highlights: ► We investigate dynamics of the international partnership networks of CDM projects. ► The density of CDM networks tends to decrease by time. ► The partnership networks’ leading groups tend to shift into host countries. ► A host country with more partnerships better utilizes global knowledge resources.

Implementing the Kyoto protocol : why JI and CDM show more promise than international emissions trading

NARCIS (Netherlands)

Woerdman, E.

The Kyoto protocol allows developed countries to achieve cost-effective greenhouse gas emission reductions abroad by means of international emissions trading (IET), joint implementation (JI) and the clean development mechanism (CDM). The article argues that JI and CDM projects will be more

The Learning Process and Technological Change in Wind Power: Evidence from China's CDM Wind Projects

Science.gov (United States)

Tang, Tian; Popp, David

2016-01-01

The Clean Development Mechanism (CDM) is a project-based carbon trade mechanism that subsidizes the users of climate-friendly technologies and encourages technology transfer. The CDM has provided financial support for a large share of Chinese wind projects since 2002. Using pooled cross-sectional data of 486 registered CDM wind projects in China…

How to make the clean development mechanism sustainable-The potential of rent extraction

International Nuclear Information System (INIS)

Muller, Adrian

2007-01-01

The clean development mechanism (CDM) should foster sustainable development and greenhouse gas emission reductions. The design of the CDM and first experience suggest that it may not achieve these goals. Developing countries hosting CDM projects may lose cheap emission reduction possibilities for their own future use, and sustainable development and technology transfer may not take place. On the other hand, the CDM has the potential to generate considerable rents if permit prices are high or costs low. To account for equity and distributional issues, a deliberate decision on how to distribute these rents could be taken and the potential failure of the CDM in meeting its goals calls for some further regulation. I suggest to combine these two issues and to extract the rents by a profit tax. Ideally, the tax revenues could contribute to national sustainable development strategies, to offset external costs imposed by CDM projects and to extract part of the resource rent they may generate. The international character of the CDM could offer a frame for internationally coordinated tax design. This would hedge against a potential race to the bottom

A Guide to Bundling Small-scale CDM Projects

International Nuclear Information System (INIS)

Mariyappan, J.; Bhardwaj, N.; De Coninck, H.; Van der Linden, N.

2005-07-01

Small-scale renewable energy and energy efficiency projects that fit the development needs of many developing countries, can potentially be supported via the Clean Development Mechanism (CDM), one of the Kyoto Protocol's flexible mechanisms for tackling climate change. However, there is concern that due to high transaction costs, as well as many existing barriers, very few investments will be made in small-scale projects, which are often the most suitable development option in countries such as India. In view of this, the 'bundling' together of appropriate small-scale projects on a regional basis has been proposed as a way in which funding can be leveraged from international sources and transaction costs reduced. IT Power, IT Power India and the Energy research Centre of the Netherlands (ECN) are carrying out a 2-year project to establish the capacity within India to enable individual small scale projects to be bundled as a single CDM project. Overall objectives are to develop the necessary institutional capabilities to formulate and implement small scale CDM projects in India; to provide a guide on how to bundle small scale projects under the CDM in developing countries; and to raise the awareness of the potential for investment in small scale energy projects which can gain funding through the CDM

The clean development mechanism's contribution to sustainable development: A review of the literature

DEFF Research Database (Denmark)

Olsen, Karen Holm

2007-01-01

The challenges of how to respond to climate change and ensure sustainable development are currently high on the political agenda among the world's leading nations. The Clean Development Mechanism (CDM) is part of the global carbon market developing rapidly as part of the Kyoto response towards...

CDM and JI in View of the Sustainability Debate

OpenAIRE

Schoot Uiterkamp, A.J.M.

2001-01-01

Clean Development Mechanism (CDM), Joint Implementation (JI) and emissions trading are the three flexible instruments incorporated in the Kyoto Protocol. This paper presents a critical assessment of the sustainability of energy-related technology innovation and transfer in the context of CDM and JI. The rebound effect is discussed by comparing intended and unintended project and process outcomes. Attention is given to the role of nations and key actors like multinationals in achieving sustain...

Sustainable development benefits of clean development mechanism projects

International Nuclear Information System (INIS)

Olsen, Karen Holm; Fenhann, Jorgen

2008-01-01

The clean development mechanism (CDM) is part of the global carbon market developing rapidly in response to global warming. It has the twin objective to achieve sustainable development (SD) in host countries and assist Annex-1 countries in achieving their emission reduction targets in a cost-efficient manner. However, research has shown that trade-offs between the two objectives exist in favour of cost-efficient emission reductions and that left to the market forces, the CDM does not significantly contribute to sustainable development. The main argument of the paper is the need for an international standard for sustainability assessment-additional to national definitions-to counter weaknesses in the existing system of sustainability approval by designated national authorities in host countries. The article develops a new methodology, i.e. a taxonomy for sustainability assessment based on text analysis of the 744 project design documents (PDDs) submitted for validation by 3 May 2006. Through analysis of the SD benefits of all CDM projects at aggregated levels, the strengths and limitations of the taxonomy are explored. The main policy implication of the research is to propose the taxonomy as the basis of an international verification protocol for designated operational entities (DOEs) for reporting, monitoring and verifying that potential SD benefits described in the PDDs are actually realized

How to attribute market leakage to CDM projects

NARCIS (Netherlands)

Vöhringer, F.; Kuosmanen, T.K.; Dellink, R.B.

2006-01-01

Economic studies suggest that market leakage rates of greenhouse gas abatement can reach the two-digit percentage range. Although the Marrakesh Accords require Clean Development Mechanism (CDM) projects to account for leakage, most projects neglect market leakage. Insufficient leakage accounting is

Annual Report 2011 for the Swedish CDM and JI program; Aarsredovisning 2011 foer Sveriges CDM och JI-program

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-11-01

The report is an annual report of the Swedish CDM [Clean Development Mechanism] and JI [Joint Implementation]program for 2011. The report shows aims and goals of the business and the work of individual CDM and JI projects and multilateral funds which have been performed over the entire duration of life and especially during 2011. The report presents volume orders, deliveries of emission reduction units as well as the volumes expected to be needed for the fulfillment of the national target by 2020. The report also includes information about the average price for the emission reductions as well as alternative costs.

Exploring the clean development mechanism: Malaysian case study

DEFF Research Database (Denmark)

Pedersen, Anne Rathmann

2008-01-01

During 2006 the CDM market in Malaysia became established and by December 2007 a total of 20 Malaysian projects had registered with the CDM Executive Board. The Kyoto Protocol defines the Annex I countries, as countries that are obliged to reduce their greenhouse gas (GHG) emissions and the clean...

Determinants of clean development mechanism activity: Evidence from China

International Nuclear Information System (INIS)

Xie, Huiming; Shen, Manhong; Wang, Rui

2014-01-01

As regards the dual goals of additionality and sustainability, some clean development mechanism (CDM) projects were successfully registered while some were rejected by the Executive Board (EB). This paper focuses on two final statuses of these projects and aims to explore the potential determinants of CDM activities. Based on the Chinese samples of the rejections and registrations, we find that (1) according to the financial barrier analysis with the internal rate of return without CDM, the additionality is the most important and robust rule of CDM activities and the CDM projects successfully registered are more additional than the rejected ones in China; (2) the sustainability is another important determinant of CDM activities in China and Chinese CDM activities are sustainable in terms of size, while the EB is criticized for its selection of unsustainable CDM projects in terms of cost-effectiveness on emission reductions within a long period or in terms of hydropower plants; (3) some other factors including the prices of sale electricity and certified emission reductions, the generating capacity and installed capacity all tend to pose significant impacts on the final status of each project that features the CDM activities in local areas of China. - Highlights: • The final status of each project features the CDM activities in local areas. • Microeconomic factors have significant impacts on the final statuses. • The additionality is the most important and robust rule of CDM activities in China. • Chinese CDM activities are sustainable in terms of size. • Chinese unsustainable CDM projects were selected by the EB in terms of cost-effectiveness

Net climate change mitigation of the Clean Development Mechanism

International Nuclear Information System (INIS)

Erickson, Peter; Lazarus, Michael; Spalding-Fecher, Randall

2014-01-01

The Clean Development Mechanism (CDM) has allowed industrialized countries to buy credits from developing countries for the purpose of meeting targets under the Kyoto Protocol. In principle, the CDM simply shifts the location of emission reductions, with no net mitigation impact. Departing from this zero-sum calculus, the Cancun Agreements reached at the sixteenth session of the Conference of the Parties (COP) in 2010 called for “one or more market-based mechanisms” capable of “ensuring a net decrease and/or avoidance of global greenhouse gas emissions”, an intention reiterated at COP 17 and COP 18. This article explores the extent to which the CDM may or may not already lead to such a “net decrease.” It finds that the CDM's net mitigation impact likely hinges on the additionality of large-scale power projects, which are expected to generate the majority of CDM credits going forward. If these projects are truly additional and continue to operate well beyond the credit issuance period, they will decrease global greenhouse gas emissions. However, if they are mostly non-additional, as research suggests, they could increase global greenhouse gas emissions. The article closes with a discussion of possible means to increase mitigation benefit. - Highlights: • The CDM's method for assessing additionality remains controversial and contested. • We develop two scenarios of the net emissions impact of the CDM. • The integrity of the CDM hinges on the emissions impact of power supply projects. • Additionality is hard to demonstrate with confidence for most power-supply projects. • A number of options are available to increase the mitigation benefit of the CDM

Joint Implementation, Clean Development Mechanism and Tradable Permits

Energy Technology Data Exchange (ETDEWEB)

Nielsen, L; Rose Olsen, K

2000-06-01

This report deals with international environmental instruments aimed at a cost-effective reduction of greenhouse gas emissions. More precisely the instruments mentioned in the Kyoto Protocol, namely Joint Implementation (JI), the Clean Development Mechanism (CDM) and Tradable Permits (TP). The report describes the background for the international co-operation on reducing the greenhouse gases and the background for the instruments. How the instruments work in theory and what the practical problems may be. What agents' incentives are when they engage in JI or CDM, and how the initiation of the instruments can be organised. The institutional frameworks for JI, CDM and TP are discussed. The report describes how the Kyoto instruments and the Kyoto commitments interact with other instruments and describe distributive effects between countries. It is analysed how the use of CDM may influence the developing countries incentives to participate in the coalition of committed countries. In the concluding chapter some recommendations on the use of JI, TP and CDM are given. The recommendations are a kind of dialog with especially the Norwegian and Swedish reports on tradable permits. Some of the issues described in this main report are analysed in separate working papers. The working papers are collected in an appendix to the main report. (au)

Joint Implementation, Clean Development Mechanism and Tradable Permits

Energy Technology Data Exchange (ETDEWEB)

Nielsen, L.; Rose Olsen, K.

2000-06-01

This report deals with international environmental instruments aimed at a cost-effective reduction of greenhouse gas emissions. More precisely the instruments mentioned in the Kyoto Protocol, namely Joint Implementation (JI), the Clean Development Mechanism (CDM) and Tradable Permits (TP). The report describes the background for the international co-operation on reducing the greenhouse gases and the background for the instruments. How the instruments work in theory and what the practical problems may be. What agents' incentives are when they engage in JI or CDM, and how the initiation of the instruments can be organised. The institutional frameworks for JI, CDM and TP are discussed. The report describes how the Kyoto instruments and the Kyoto commitments interact with other instruments and describe distributive effects between countries. It is analysed how the use of CDM may influence the developing countries incentives to participate in the coalition of committed countries. In the concluding chapter some recommendations on the use of JI, TP and CDM are given. The recommendations are a kind of dialog with especially the Norwegian and Swedish reports on tradable permits. Some of the issues described in this main report are analysed in separate working papers. The working papers are collected in an appendix to the main report. (au)

Wind farm investment risks under uncertain CDM benefit in China

International Nuclear Information System (INIS)

Yang, Ming; Nguyen, Francois; T'Serclaes, Philippine de; Buchner, Barbara

2010-01-01

China has set an ambitious target to increase its wind power capacity by 35 GW from 2007 to 2020. The country's hunger for clean power provides great opportunities for wind energy investors. However, risks from China's uncertain electricity market regulation and an uncertain energy policy framework, mainly due to uncertain Clean Development Mechanism (CDM) benefits, prevent foreign investors from investing in China's wind energy. The objectives of this paper are to: (1) quantify wind energy investment risk premiums in an uncertain international energy policy context and (2) evaluate the impact of uncertain CDM benefits on the net present values of wind power projects. With four scenarios, this study simulates possible prices of certified emissions reductions (CERs) from wind power projects. Project net present values (NPVs) have been calculated. The project risk premiums are drawn from different and uncertain CER prices. Our key findings show that uncertain CDM benefits will significantly affect the project NPVs. This paper concludes that the Chinese government needs revising its tariff incentives, most likely by introducing fixed feed-in tariffs (FITs), and re-examining its CDM-granting policy and its wind project tax rates, to facilitate wind power development and enable China to achieve its wind energy target. (author)

Explaining the differential distribution of Clean Development Mechanism projects across host countries

International Nuclear Information System (INIS)

Winkelman, Andrew G.; Moore, Michael R.

2011-01-01

The Clean Development Mechanism (CDM) of the Kyoto Protocol represents an opportunity to involve all developing countries in the effort to reduce greenhouse gas emissions while also promoting sustainable development. To date, however, the majority of CDM projects have gone to emerging markets such as China, India, Brazil, and Mexico, while very few least developed countries have hosted projects. This paper investigates the differential distribution of CDM activities across countries. We develop a conceptual model for project profitability, which helps to identify potential country-level determinants of CDM activity. These potential determinants are employed as explanatory variables in regression analysis to explain the actual distribution of projects. Human capital and greenhouse gas emission levels influenced which countries have hosted projects and the amount of certified emission reductions (CER) created. Countries that offered growing markets for CDM co-products, such as electricity, were more likely to be CDM hosts, while economies with higher carbon intensity levels had greater CER production. These findings work against the least developed countries and help to explain their lack of CDM activity. - Research Highlights: → Regression models are used to explain the inter-country distribution of CDM projects. → Emissions and human capital are significant for hosting projects and CER creation. → An economy's emissions intensity is significant in determining CERs created. → Capacity building and electricity sector growth are significant in hosting projects. → The experience level for host countries in the CDM is significant for CER creation.

Toward an effective implementation of clean development mechanism projects in China

International Nuclear Information System (INIS)

Zhang Zhongxiang

2006-01-01

With the already huge and growing amount of greenhouse gas emissions and a great deal of low-cost abatement options available, China is widely expected as the world's number one host country of clean development mechanism (CDM) projects. But, making this potential a reality represents a significant challenge for China, because there has been a general lack of awareness by both the Chinese government and business communities, clear institutional structure, and implementation strategy. This has raised great concern about China's ability to compete internationally for CDM projects and exploit fully its CDM potential. This paper aims to address how CDM projects will be effectively implemented in China by examining the major CDM capacity building projects in China with bilateral and multilateral donors, the treatment of low-cost, non-priority CDM projects, and how a system for application, approval, and implementation of CDM projects is set up in China and what roles the main institutional actors are going to play in the system. We conclude that these capacity building assistances, the establishment of streamlined and transparent CDM procedures and sound governance, and the lessons learned and experience gained from the implementation of the CDM project in Inner Mongolia and the two Prototype Carbon Fund' projects will help China to take advantage of CDM opportunities. Moreover, in order to further capitalize on its CDM potential, there is a pressing need for the Chinese government to amend its current interim CDM regulations, in particular those controversial provisions on the eligibility to participate in CDM projects in China and the distribution of the revenues derived from CDM project between the project developer and the Chinese government. We believe that taking these capacity building projects and the recommended actions to clearly define the sustainable development objective of the CDM and disseminate CDM knowledge to local authorities and project developers as

REDD+ and the Clean Development Mechanism: A comparative perspective

Directory of Open Access Journals (Sweden)

Lovleen Bhullar

2013-04-01

Full Text Available The program, ‘Reducing Emissions from Deforestation and Forest Degradation’ (REDD, which operates within the international climate change policy framework, is projected to emerge as one of the key climate change mitigation mechanisms for developing countries. The existing Afforestation/Reforestation (A/R mechanism, operating under the Clean Development Mechanism of the Kyoto Protocol to the United Nations Framework Convention on Climate Change, may prove useful for drawing lessons for the emerging REDD program, since both mechanisms represent flexible means for developed countries to achieve compliance with their mitigation targets under the Kyoto Protocol. The possible means include CDM as the basis for a project-based approach for the implementation of REDD (if adopted or the inclusion of REDD within CDM. This article compares the features of A/R CDM and REDD, identifies similarities and differences, and analyses the extent to which the former can provide guidance for the development of a carbon governance mechanism for REDD.

Rethinking the Role of Development Banks in Climate Finance: Panama’s Barro Blanco CDM Project and Human Rights

Directory of Open Access Journals (Sweden)

Beatriz Felipe Pérez

2016-06-01

Full Text Available Development banks are key actors in climate finance. During the last decades, they have increased the funding of climate change related projects, especially those under the Clean Development Mechanism (CDM. Defined in Article 12 of the Kyoto Protocol, the CDM aims at contributing to climate change mitigation while assisting in achieving sustainable development. However, many CDM projects have caused environmental damage and human rights abuses that especially affect the most vulnerable people. Located in Panama, the Barro Blanco hydro-power dam exemplifies the complex interrelationship of climate financing, development policies, the political and economic national context and human rights. Through the analysis of the role of development banks in climate finance, especially in the context of CDM projects, this paper aims (1 to clarify the role of development banks in climate finance, (2 to shed light on the vulnerable situation of the people affected by these projects, (3 to highlight the gaps in both the CDM rules and the development banks’ safeguard policies concerning the protection of human rights and the prevention of environmental abuses, and (4 to give a current example of this complex situation through the Barro Blanco case study. This paper argues that the manifold and often competing national and international legal and political layers of climate change mitigation projects repeatedly leave project affected people vulnerable to human rights violations without adequate safeguards and mechanisms to effectively articulate their interests, protect their rights and promote access to justice.

Technology transfer in the Clean Development Mechanism

International Nuclear Information System (INIS)

De Coninck, H.C.; Haake, F.; Van der Linden, N.H.

2007-01-01

Technology transfer is often mentioned as an ancillary benefit of the Kyoto Protocol's Clean Development Mechanism (CDM), but this claim has never been researched or substantiated. The question of technology transfer is important from two perspectives: for host countries, whether the CDM provides a corridor for foreign, climate-friendly technologies and investment, and for industrialised countries as it provides export potential for climate-friendly technologies developed as a consequence of stringent greenhouse gas targets. In order to better understand whether technology transfer from the EU and elsewhere is occurring through the CDM, and what is the value of the associated foreign investment, this paper examines technology transfer in the 63 CDM projects that were registered on January 1st, 2006. Technology originates from outside the host country in almost 50% of the evaluated projects. In the projects in which the technology originates from outside the host country, 80% use technology from the European Union. Technologies used in non-CO2 greenhouse gas and wind energy projects, and a substantial share of the hydropower projects, use technology from outside the host country, but biogas, agricultural and biomass projects mainly use local technology. The associated investment value with the CDM projects that transferred technology is estimated to be around 470 million Euros, with about 390 coming from the EU. As the non-CO2 greenhouse gas projects had very low capital costs, the investment value was mostly in the more capital-intensive wind energy and hydropower projects

Principle-Based Ethics and the Clean Development Mechanism

International Nuclear Information System (INIS)

Bay, Ingrid; Oughton, Deborah

2003-01-01

Search for common values can go a long way resolving international political and social differences, and represents an area where ethical evaluation can offer an input to international legislation. This paper argues that a principle-based, normative approach should be applied to evaluation of Clean Development Mechanism (CDM) projects and the goal of sustainable development (SD). Primafacie ethical principles to promote weil-being, dignity and justice can be defined and supported from international agreements on sustainable developments. To promote coherency, these principles should then be specifled according to particular CDM-projects, to produce a set of norms that covers: 1) the different dimension to sustainable development, 2) the distribution of costs and benefits across time and place, and 3) consequences for different affected parties, including future generations and the environment

Latin America-Alberta-Canada CDM Conference: Conference Summary

International Nuclear Information System (INIS)

Anon

2000-01-01

Proposals for joint initiatives put forward by participants at the Clean Development Mechanisms Conference included (1) the development of regional guidelines to assist governments in setting regulatory framework for projects to qualify as CDMs, (2) development of regional baselines and regional performance indicators for social benefit and sustainable development, (3) a specific project in Mexico to test the CDM framework and eligibility criteria, (4) development of bilateral agreements between governments, (5) staff exchanges between associations and governments, (6) government recognition for private sector actions such as a letter affirming that certified emission reductions would be accepted for commitments, (7) sharing of information on websites, and (8) capacity building, training programs and workshops. The Conference also identified common ground and shared interest in CDM initiatives among participants, and readiness to explore joint ventures and technology transfer opportunities. There is wide-spread agreement on the need to resolve uncertainties of CDM, such as baseline and additionality; monitoring, reporting, certification; buyer/seller liability; adaptation levy for international emissions trading, joint implementation and clean development mechanism transactions. Significant consensus exists regarding benefits of 'learning by doing' and the need for minimizing transaction costs and risks. Baseline and Additionality are recognized as the critical issues, with social benefits, sustainable development aspects of projects, and the critical nature of integrity, technical expertise, and track record of both partners as close seconds. The importance of framework arrangements, host country approval, clear designation of responsibility and authority to approve projects, the need for specific guidelines and specific approval procedures, country-to-country agreements and national crediting arrangement are recognized by all participants. With regard to issues

Why the CDM can reduce carbon leakage

International Nuclear Information System (INIS)

Kallbekken, S.

2006-04-01

Carbon leakage is an important concern because it can reduce the environmental effectiveness of the Kyoto Protocol. The Clean Development Mechanism, one of the flexibility mechanisms allowed under the protocol, has the potential to reduce carbon leakage significantly because it reduces the relative competitive disadvantage to Annex B countries of restricting greenhouse gas emissions. The economic intuition behind this mechanism is explored in a theoretical analysis. It is then analyzed numerically using a CGE model. The results indicate that, assuming appropriate accounting for leakage and under realistic assumptions on CDM activity, the CDM has the potential to reduce the magnitude of carbon leakage by around three fifths

Issues related to a programme of activities under the CDM

Energy Technology Data Exchange (ETDEWEB)

Ellis, J.

2006-05-15

Emissions of CO2 from the energy and land-use change and forestry sectors are responsible for the majority of emissions in non-Annex I Parties to the UNFCCC. Tackling greenhouse gas (GHG) emissions from these sectors is a key to slowing the growth in GHG emissions in non-Annex I countries. Implementing Clean Development Mechanism (CDM) projects can help achieve this aim, while also assisting non-Annex I countries to move towards sustainable development and Annex I countries achieve their emission commitments under the Kyoto Protocol. There has been rapid progress in the CDM over the last year - in terms of the number of projects in the pipeline and registered, and in terms of credits issued. However, some important sectors are notable by their small share in the CDM portfolio. Several countries have also called attention to the need to accelerate the process of approving CDM methodologies and projects. In order to improve the effectiveness of the CDM to achieve its dual objectives, the COP/MOP agreed a decision on 'further guidance relating to the clean development mechanism. This decision lays out guidance on how to improve the operation of the CDM, and includes provisions that allow: (1) Bundling of project activities; and (2) Project activities under a programme of activities, to be registered as a CDM project activity. At present, of the 172 currently registered CDM project activities, 27 involve programmes or bundles. These project activities can include more than one project type, be implemented in several locations, and/or occur in more than one sector. This paper assesses how project activities under a programme of activities under the CDM (referred to here as PCDM) could help to increase the effectiveness of the CDM by encouraging a wide spread of emission mitigation activities. This paper also explores the key issues that may need to be considered for the PCDM concept to be further implemented. The paper concludes that: (1) Key concepts and issues

Analysis of registered CDM projects: potential removal of evidenced bottlenecks

Energy Technology Data Exchange (ETDEWEB)

Agosto, D.; Bombard, P.; Gostinelli, F.

2007-07-01

The Clean Development Mechanism (CDM) has developed during its first period of implementation, a distinctive set of patterns. The authors thought of concentrating on the CDM analysis in order to highlight potential remedies or reasons for given bottlenecks. In order to establish a sort of extensive SWOT analysis for CDMs, all the 356 projects actually (November 2006) registered at UNFCCC were examined, together with all the about 1000 PDDs presented to the UNFCCC but not registered yet. The CDM projects have been studied trying to cluster projects according to relevant characteristics, both from a technical and an economic point of view. Chosen indicators are meant to identify: more convenient/more diffused energy system for a CDM; reasons for a geographical distribution of different types of projects; potentials for a future exploitation of lower used technologies in CDM. Conclusions are drawn and appropriate tables and graphs presented. (1) the Baseline Emission Factor, combined to economic patterns, is the pivotal factor that characterizes both choices of host country and technology; (2) some technologies can exploit appropriately CDM scheme, whilst other technologies, are constrained by it. (3) there are still some important weak points: grouping of non Annex I countries; crediting period; criteria for the evaluation of sustainable development. (auth)

Carbon quota price and CDM potentials after Marrakesh

International Nuclear Information System (INIS)

Wenying Chen

2003-01-01

The Kyoto Protocol sets quantified GHG emission reduction commitments for Annex I Parties. But their emission reduction requirements related to BAU projections, one of the key factors to effect on future carbon market, are uncertain. Both the decisions made in Bonn and Marrakesh would have further consequences for how the future carbon market will take shape. This paper, with application of the carbon emission reduction trading model, evaluates future carbon quota price and Clean Development Mechanism (CDM) potentials under different BAU projections, and does sensitivity analysis on carry-over of AAUs, CERs and ERUs, implementation rate, transaction cost, holding of CERs in Non-Annex I Parties, etc. to assess the impacts of relevant decisions of COP6-bis and COP7 on the carbon market. Under different BAU projections, future carbon quota price and CDM potentials could vary widely. Carry over of AAUs, CERs, ERUs, and holding of CERs in Non-Annex I Parties could raise both quota price and total CDM potentials considerably. Implementation rate could have big impacts on both carbon quota price and CDM potentials, especially for the cases formerly with relatively high CDM potentials, and it could also change the regional distribution of CDM potentials. Transaction cost's effect on the carbon market would be comparatively low, but would become unignorable in the market whose quota price is low. It would lead to a downward trend in price while upward in CDM potentials when increasing the implementation rate or lowering transaction cost. Withdrawal of USA would dramatically shrink carbon price and credit amount, and large numbers of hot air and sink credits would further greatly crowd out the CDM projects; carry over of AAUs, CERs and ERUs, holding of CERs in Non-Annex I Parties, prompt start of CDM projects, etc., would, however, enhance the total CDM credits to ensure more investment and technology flow to developing countries to promote their sustainable development

Carbon quota price and CDM potentials after Marrakesh

International Nuclear Information System (INIS)

Chen Wenying

2003-01-01

The Kyoto Protocol sets quantified GHG emission reduction commitments for Annex I Parties. But their emission reduction requirements related to BAU projections, one of the key factors to effect on future carbon market, are uncertain. Both the decisions made in Bonn and Marrakesh would have further consequences for how the future carbon market will take shape. This paper, with application of the carbon emission reduction trading model, evaluates future carbon quota price and Clean Development Mechanism (CDM) potentials under different BAU projections, and does sensitivity analysis on carry-over of AAUs, CERs and ERUs, implementation rate, transaction cost, holding of CERs in Non-Annex I Parties, etc. to assess the impacts of relevant decisions of COP6-bis and COP7 on the carbon market. Under different BAU projections, future carbon quota price and CDM potentials could vary widely. Carry over of AAUs, CERs, ERUs, and holding of CERs in Non-Annex I Parties could raise both quota price and total CDM potentials considerably. Implementation rate could have big impacts on both carbon quota price and CDM potentials, especially for the cases formerly with relatively high CDM potentials, and it could also change the regional distribution of CDM potentials. Transaction cost's effect on the carbon market would be comparatively low, but would become unignorable in the market whose quota price is low. It would lead to a downward trend in price while upward in CDM potentials when increasing the implementation rate or lowering transaction cost. Withdrawal of USA would dramatically shrink carbon price and credit amount, and large numbers of hot air and sink credits would further greatly crowd out the CDM projects; carry over of AAUs, CERs and ERUs, holding of CERs in Non-Annex I Parties, prompt start of CDM projects, etc., would, however, enhance the total CDM credits to ensure more investment and technology flow to developing countries to promote their sustainable development

Moving from the CDM to 'various approaches'

International Nuclear Information System (INIS)

Shishlov, Igor; Bellassen, Valentin

2014-03-01

The Clean Development Mechanism (CDM) facilitated the emergence and deployment of low-cost greenhouse gas (GHG) abatement technologies such as destruction of industrial gases and capturing methane from landfills and coal mines. Some of these technologies are now ripe to 'graduate' from the CDM into other, more mainstream, economic tools. The first such step was taken in September 2013 when the G20 leaders agreed to phase out HFCs - highly potent greenhouse gases - including HFC-23 that was the focus of 19 CDM projects. A potential HFC-23 abatement fund under the Montreal Protocol could reduce up to 1.8 Gt CO 2 e by 2020 at a cost of under US$0.2 per ton of CO 2 e, i.e. much cheaper than the price paid to CDM projects through carbon crediting. The next potential candidate technology to 'graduate' from the CDM is the abatement of nitrous oxide (N 2 O) emissions in the chemical industry, which have already been placed on the agenda of the Montreal Protocol. (authors)

Barriers to clean development mechanism renewable energy projects in Mexico

International Nuclear Information System (INIS)

Lokey, Elizabeth

2009-01-01

Mexico is not reaching its full potential to capture benefits from clean development mechanism (CDM) projects because of its limited market for independent power producers (IPPs) and the barriers imposed on these entities by the state-run electric utility that controls most of the country's generation and transmission. This state-run entity has pursued CDM revenues only in isolated cases where international financial assistance was given because it is bound by law to pursue the least-cost generation option for its customers. Recent changes in Mexican legislation that provide incentives for renewable energy development could open the marketplace for these types of projects. (author)

EU climate change policy 2013-2020: Using the Clean Development Mechanism more effectively in the non-EU-ETS Sector

International Nuclear Information System (INIS)

Gorecki, Paul K.; Lyons, Sean; Tol, Richard S.J.

2010-01-01

Under European Union proposals for CO 2 emission reduction between 2013 and 2020, a Member State can transfer to another Member State the right to use its unused Clean Development Mechanism ('CDM') credits. The paper addresses three issues in relation to these CDM Warrants ('CDM W '). First, how should the Member State treat the CDM W in making decisions concerning emission reduction? The price of the property right is an important signal for a Member State in deciding the level of domestic abatement compared to trading in CDM W s. In other words, a shadow price for CDM W s should be used in formulating the emission strategy in order to determine whether or not a Member State is a buyer or seller of CDM W s. Second, what mechanism should be used to facilitate the exchange of CDM W s? The preferred mechanism depends on the market size, over which there appears to be some ambiguity: market intermediaries such as Over-the-Counter trades and exchanges are preferred if market size is small; auctions if the market size is large. Third, who should realise the value of CDM W s-the State, existing polluters, etc.? The value of CDM W s should accrue to the State. - Research highlights: →Clean Development Mechanism Warrants (CDMw) reduce the costs of emission reduction. →Member States should explicitly take into account the value of the CDM w s. →Appropriate market mechanisms - exchanges or auctions - should be created. →The value of CDM w s should accrue to government.

Possibility and potential of clean development mechanisms in China

International Nuclear Information System (INIS)

Gao Weijun; Zhou Nan; Li Haifeng; Kammen, Daniel M

2007-01-01

China has become the world's second largest greenhouse gas (GHG) emitter behind the United States. It emits approximately three billion tons of CO 2 equivalents every year. Its growing economy and large population are making a wealthier, more consumption-oriented country. Energy demand is expected to grow 5-10% per year through 2030. Therefore, a large potential of GHG emission reduction in China can be expected. The clean development mechanism (CDM) put forward in the Kyoto Protocol for reductions of GHGs can support the sustainable development of developing countries and help developed countries to achieve their emission reduction targets at low cost. However, there are still many disagreements to be resolved between developing and developed countries. In this letter, we try to introduce the current development of CDM projects in China and discuss its potential and opportunities in the future decades

A Reformed CDM - including new mechanisms for sustainable development

Energy Technology Data Exchange (ETDEWEB)

Holm Olsen, K; Fenhann, J

2009-07-01

The annual CD4CDM Perspectives Series features a topic of pivotal importance to the global carbon market. The series seeks to communicate the diverse insights and visions of leading actors in the carbon market to better inform the decisions of professionals and policymakers in developing countries. The second theme of the series focuses on how the CDM can be reformed in a post-2012 climate regime, including new mechanism for sustainable development. Seventeen contributors from the private sector, Designated National Authorities, the Executive Board, research, and development agencies present their perspective on meeting challenges such as the unequal regional distribution of CDM projects, concerns about environmental integrity and technology transfer, complex governance procedures, and questions about the CDM's contribution to sustainable development. The new ideas and solutions to these challenges proposed by the authors in this edition of Perspectives have been solicited to help professionals and policy makers make the best decisions in the lead-up to COP 15 in Copenhagen and beyond. (au)

A Reformed CDM - including new mechanisms for sustainable development

Energy Technology Data Exchange (ETDEWEB)

Holm Olsen, K.; Fenhann, J.

2009-07-01

The annual CD4CDM Perspectives Series features a topic of pivotal importance to the global carbon market. The series seeks to communicate the diverse insights and visions of leading actors in the carbon market to better inform the decisions of professionals and policymakers in developing countries. The second theme of the series focuses on how the CDM can be reformed in a post-2012 climate regime, including new mechanism for sustainable development. Seventeen contributors from the private sector, Designated National Authorities, the Executive Board, research, and development agencies present their perspective on meeting challenges such as the unequal regional distribution of CDM projects, concerns about environmental integrity and technology transfer, complex governance procedures, and questions about the CDM's contribution to sustainable development. The new ideas and solutions to these challenges proposed by the authors in this edition of Perspectives have been solicited to help professionals and policy makers make the best decisions in the lead-up to COP 15 in Copenhagen and beyond. (au)

Technology transfer to Africa: constraints for CDM operations

International Nuclear Information System (INIS)

Karani, Patrick

2002-01-01

It is practically difficult to design, implement and manage Clean Development Mechanism (CDM) projects in Africa without a provision for capacity building that will enable the application of modern technologies and techniques. Existing institutions need strengthening, human capacity needs to be developed and new markets need to be promoted. The author outlines institutional and market constraints in relation to technology transfer (e.g renewable energy technologies) and development in Africa. (Author)

The Clean Development Mechanism as a Vehicle for Technology Transfer and Sustainable Development - Myth or Reality?

Directory of Open Access Journals (Sweden)

Gary Cox

2010-09-01

Full Text Available This paper critically examines the clean development mechanism (CDM established under Article 12 of the Kyoto Protocol in terms of its effectiveness as a vehicle for technology transfer to developing countries, a specific commitment under the UNFCCC. Fundamentally, the paper poses the question of whether technology transfer as part of the CDM is a myth or a reality in the broader context of sustainable development. Technology transfer between countries of the North and South is explored in a historical context and the emergence of technology transfer obligations is traced in multilateral environmental agreements. The architecture of the UNFCCC and the Kyoto Protocol are examined in relation to technology transfer obligations. Empirical studies are reviewed to gain an understanding of how CDM operates in practice, with a closer examination of a small number of recent CDM projects. There is an update on the Technology Mechanism being established under the Copenhagen Accord. The paper concludes with a summary of the benefits of CDM to date and its current limitations in achieving the scaling-up of affordable environmentally sound technology transfer envisaged in the Bali Action Plan. The conclusion is that technology transfer must be a much more explicit objective of CDM with better targeting of projects in order to achieve locally sustainable equitable outcomes. Furthermore, the link between CDM and technology transfer needs to be much more explicitly made in order that, in the long run, such interventions will lead to viable low emission development pathways in developing countries.

Promoting energy efficient building in China through clean development mechanism

International Nuclear Information System (INIS)

Zhou, Lu; Li, Jing; Chiang, Yat Hung

2013-01-01

This study aims to investigate the barriers which impede the promotion of Energy Efficient Building (EEB), and to propose solutions to alleviate these barriers by capturing the benefits from Clean Development Mechanism (CDM), in the context of China. Through comprehensive literature review, eight types of significant barriers are identified, including weak enforcement of government policies, market inefficiency, information barrier, small and scattering buildings, fragmentation of the construction industry, perceived high risk, higher initial cost, and difficulty in energy management. To overcome the barriers, the potential of CDM to facilitate EEB promotion is then discussed. These barriers are verified and potential solutions are tested with a questionnaire survey conducted among five professional groups in China, i.e. designers, project managers, quantity surveyors, marketing managers and property managers. The results suggest that they generally identified with the barriers. However, their limited awareness of CDM implies that corresponding policies should be formulated and implemented to improve their capability of providing more EEBs with CDM. - Highlights: ► Eight types of significant barriers to the implement of EEB are identified. ► The sources and roots of barriers are verified with the industry professionals. ► Benefits of CDM to EEB are discussed. ► There is limited awareness of CDM in building sector. ► Overcoming or alleviating these barriers through CDM and other sources are proposed

Financing Structures for CDM Projects in India and Capacity Building Options for EU-Indo Collaboration

OpenAIRE

Krey, Matthias; Michaelowa, Axel; Deodhar, Vinay

2003-01-01

The Clean Development Mechanism (CDM) under the Kyoto Protocol to the UN Framework Convention on Climate Change (UNFCCC) enables industrialized countries to meet a part of their emission reduction requirements through purchase of emission reduction credits from projects in developing countries. Various studies have concluded that India is likely to be one of the major countries supplying such projects. However, in order that a large number of high-quality CDM projects is developed and result ...

Experiences of project developers around CDM projects in South Africa

International Nuclear Information System (INIS)

Thurner, Thomas W.; Varughese, Arun

2013-01-01

Project developers in South Africa are puzzled with the long process of evaluating and registering their CDM projects. In addition to other obstacles, we find that South African big businesses are rather reluctant to engage in any new business activities such as CDM projects and municipalities often lack the necessary flexibility. This offers opportunities for small-scale project developers who spot the opportunities and find creative solutions to overcome these difficulties. - Highlights: • First paper analysing the experience of small project developers in South Africa. • Project developers in South Africa are puzzled with the long process. • South African big businesses are reluctant to engage in CDM projects. • Small-scale project developers spot opportunities and find creative solutions to overcome difficulties. • Also, we saw learning processes of South African administration in support of CDM projects

Improving the attractiveness of CDM projects through allowing and incorporating options

International Nuclear Information System (INIS)

Carmichael, David G.; Ballouz, Joseph J.; Balatbat, Maria C.A.

2015-01-01

The paper puts forward a proposal that, within Clean Development Mechanism (CDM) projects, investors be allowed to benefit from options; this will require a CDM rule change. Through the presence of options, the downside risk resulting from low carbon prices and/or low achieved emission reductions on projects can be limited, while any upside resulting from high carbon prices and/or high achieved emission reductions can be taken advantage of. It is demonstrated that the presence of options improves the financial attractiveness of CDM projects, and this is at no detriment to any stakeholder. The flow-on from the proposal is that more CDM projects should be realisable if options are available, and this in turn will lead to reduced global emissions and improved sustainability. The proposal is supported by the necessary theory and is demonstrated on two registered CDM projects, one on hydropower and one on wind power. - Highlights: • The paper proposes that options be allowed within CDM projects. • Introducing options will require a CDM rule change. • Options improve the financial attractiveness of CDM projects. • Allowing options comes at no cost or detriment to any party. • Allowing options is a win–win situation to both society and the project proponent.

Assessment of clean development mechanism potential of large-scale energy efficiency measures in heavy industries

International Nuclear Information System (INIS)

Hayashi, Daisuke; Krey, Matthias

2007-01-01

This paper assesses clean development mechanism (CDM) potential of large-scale energy efficiency measures in selected heavy industries (iron and steel, cement, aluminium, pulp and paper, and ammonia) taking India and Brazil as examples of CDM project host countries. We have chosen two criteria for identification of the CDM potential of each energy efficiency measure: (i) emission reductions volume (in CO 2 e) that can be expected from the measure and (ii) likelihood of the measure passing the additionality test of the CDM Executive Board (EB) when submitted as a proposed CDM project activity. The paper shows that the CDM potential of large-scale energy efficiency measures strongly depends on the project-specific and country-specific context. In particular, technologies for the iron and steel industry (coke dry quenching (CDQ), top pressure recovery turbine (TRT), and basic oxygen furnace (BOF) gas recovery), the aluminium industry (point feeder prebake (PFPB) smelter), and the pulp and paper industry (continuous digester technology) offer promising CDM potential

Trojan horse or horn of plenty? Reflections on allowing CCS in the CDM

International Nuclear Information System (INIS)

Coninck, Heleen de

2008-01-01

The discussion around allowing CO 2 capture and geological storage (CCS) into the Kyoto Protocol's Clean Development Mechanism (CDM) is important, as the CDM is currently the only structural incentive for reducing greenhouse gas emissions in the developing world. Without the potential incentives given by the CDM, CCS in developing countries will only take place sporadically in niche sectors. The debate around CCS in the CDM has developed into a highly polarised discussion, with a deep divide between proponents and opponents and no view on reconciliation between the various perspectives. Environmental organisations and several developing-country parties in the climate negotiations are increasingly vehemently opposed against CCS in the CDM, and industrialised countries, several large fossil-fuel-dependent developing countries and industry view CCS as a natural option under the CDM, provided some surmountable technical and procedural barriers are taken care of. This paper argues that the efforts of those trying to bring the discussion to a close by solving technical and procedural issues around CCS in the CDM will not lead to agreement because of underlying convictions of all stakeholders. Six convictions are identified and discussed. Based on the discussion of the convictions of both opponents and proponents, research needs and a potential negotiation package are suggested. The research needs are primarily in the field of the CDM market impacts of CCS, the issue of enhanced oil emission accounting, and sustainable development aspects, and particularly whether developing countries could actually benefit from technological leadership in the field of CCS, or whether they will be worse off. Devoting attention to the identified convictions could provide information for a more acceptable negotiation package on CCS in the CDM. (author)

The role of absorptive capactiy in technological learning in CDM projects : evidences from survey in Brazil, China, India and Mexico

NARCIS (Netherlands)

Doranova, A.; Costa, I.; Duysters, G.M.

2011-01-01

Technology transfer in Clean Development Mechanism (CDM) projects of the Kyoto Protocol has acquired increasing attention of policy makers and academia. This study is an effort to investigate CDM projects' related technology transfer process from the organisational learning and technological

The role of absorptive capacity in technological learning in CDM projects : Evidences from survey in Brazil, China, India and Mexico

NARCIS (Netherlands)

Doranova, A.; Costa, I.; Duijsters, G.M.

2011-01-01

Technology transfer in Clean Development Mechanism (CDM) projects of the Kyoto Protocol has acquired increasing attention of policy makers and academia. This study is an effort to investigate CDM projects' related technology transfer process from the organisational learning and technological

Does the Gold Standard label hold its promise in delivering higher Sustainable Development benefits? A multi-criteria comparison of CDM projects

International Nuclear Information System (INIS)

Drupp, Moritz A.

2011-01-01

The Clean Development Mechanism (CDM) has a twin objective: to help developed countries reduce GHG emissions, and to support developing countries in achieving Sustainable Development (SD). As a response to the widespread criticism of the CDM's unsatisfactory SD record, initiatives have developed premium labels like the Gold Standard, which applies two additional 'screens' to filter CDM projects for higher SD benefits. In order to determine whether Gold Standard projects can be associated with higher local SD benefits, this paper evaluates the potential benefits of 48 CDM projects using a multi-criteria method and building on existing work. The 18 evaluated Gold Standard projects are compared to a 'representative portfolio' of 30 unlabeled CDM projects in order to capture the 'full' effect of the additional Gold Standard requirements, which is further decomposed into the two 'screen' effects. The results suggest that Gold Standard Certified Emission Reductions can be associated with higher potential local SD benefits when compared to the 'representative portfolio' of unlabeled CDM projects, while the comparison of projects of the same type remains inconclusive. The results support previous findings showing that renewable energy projects may deliver comparatively high SD benefits. - Research highlights: → This study evaluates and compares the potential contribution of unlabeled- and Gold Standard labeled CDM projects to Sustainable Development (SD), extending the previously assessed projects as well as the methodological approach. → Gold Standard labeled Certified Emission Reductions (CER) can be associated with higher potential SD benefits compared to unlabeled projects. → A decomposition analysis shows that the Gold Standard s SD surplus must be primarily attributed to the favorable contribution of renewable energy projects to SD. → Policy makers might thus shift incentives towards renewable energy projects and buyers of CERs may shift their offset

CDM Country Guide for Indonesia

International Nuclear Information System (INIS)

2005-01-01

Under the Integrated Capacity Strengthening for the CDM (ICS-CDM) programme, IGES presents the CDM Country Guides, a series of manuals on CDM project development for Cambodia, China, India, Indonesia, the Philippines, and Thailand. These guidebooks aim at facilitating CDM project developments in Asia by providing essential information to both project developers and potential investors. This volume is on Indonesia

CDM Country Guide for China

International Nuclear Information System (INIS)

2005-01-01

Under the Integrated Capacity Strengthening for the CDM (ICS-CDM) programme, IGES presents the CDM Country Guides, a series of manuals on CDM project development for Cambodia, China, India, Indonesia, the Philippines, and Thailand. These guidebooks aim at facilitating CDM project developments in Asia by providing essential information to both project developers and potential investors. This volume is on China

CDM Country Guide for India

International Nuclear Information System (INIS)

2005-01-01

Under the Integrated Capacity Strengthening for the CDM (ICS-CDM) programme, IGES presents the CDM Country Guides, a series of manuals on CDM project development for Cambodia, China, India, Indonesia, the Philippines, and Thailand. These guidebooks aim at facilitating CDM project developments in Asia by providing essential information to both project developers and potential investors. This volume is on India

CDM Country Guide for Thailand

International Nuclear Information System (INIS)

2006-01-01

Under the Integrated Capacity Strengthening for the CDM (ICS-CDM) programme, IGES presents the CDM Country Guides, a series of manuals on CDM project development for Cambodia, China, India, Indonesia, the Philippines, and Thailand. These guidebooks aim at facilitating CDM project developments in Asia by providing essential information to both project developers and potential investors. This volume is on Thailand

CDM Country Guide for Cambodia

International Nuclear Information System (INIS)

2005-01-01

Under the Integrated Capacity Strengthening for the CDM (ICS-CDM) programme, IGES presents the CDM Country Guides, a series of manuals on CDM project development for Cambodia, China, India, Indonesia, the Philippines, and Thailand. These guidebooks aim at facilitating CDM project developments in Asia by providing essential information to both project developers and potential investors. This volume is on Cambodia

Operationalizing clean development mechanism baselines: A case study of China's electrical sector

Science.gov (United States)

Steenhof, Paul A.

The global carbon market is rapidly developing as the first commitment period of the Kyoto Protocol draws closer and Parties to the Protocol with greenhouse gas (GHG) emission reduction targets seek alternative ways to reduce their emissions. The Protocol includes the Clean Development Mechanism (CDM), a tool that encourages project-based investments to be made in developing nations that will lead to an additional reduction in emissions. Due to China's economic size and rate of growth, technological characteristics, and its reliance on coal, it contains a large proportion of the global CDM potential. As China's economy modernizes, more technologies and processes are requiring electricity and demand for this energy source is accelerating rapidly. Relatively inefficient technology to generate electricity in China thereby results in the electrical sector having substantial GHG emission reduction opportunities as related to the CDM. In order to ensure the credibility of the CDM in leading to a reduction in GHG emissions, it is important that the baseline method used in the CDM approval process is scientifically sound and accessible for both others to use and for evaluation purposes. Three different methods for assessing CDM baselines and environmental additionality are investigated in the context of China's electrical sector: a method based on a historical perspective of the electrical sector (factor decomposition), a method structured upon a current perspective (operating and build margins), and a simulation of the future (dispatch analysis). Assessing future emission levels for China's electrical sector is a very challenging task given the complexity of the system, its dynamics, and that it is heavily influenced by internal and external forces, but of the different baseline methods investigated, dispatch modelling is best suited for the Chinese context as it is able to consider the important regional and temporal dimensions of its economy and its future development

Point Climat no. 20 'CDM Policy Dialogue: a traditional 'treatment' coupled with new 'prescriptions' '

International Nuclear Information System (INIS)

Shishlov, Igor; Bellassen, Valentin

2012-01-01

Among the publications of CDC Climat Research, 'Climate Briefs' presents, in a few pages, hot topics in climate change policy. This issue addresses the following points: As the Clean Development Mechanism (CDM) reached the milestone billionth CER issued and the secondary CER price tipped below 2 euros, the recommendations of the High Level Panel on the CDM Policy Dialogue published on 11 September 2012 could not be timelier. By focusing on the current supply-demand disequilibrium that threatens the very survival of the CDM, the Panel extended its recommendations beyond the traditional scope of CDM reform. The Panel's ambition to pro-actively engage with other climate initiatives such as the Green Fund and regional markets is also innovative. Indeed, the CDM toolbox enriched by 10-years of experience stands to apply to or be partly recycled through new mechanisms. Along the 51 recommendations from the Policy Dialogue, there are calls for further standardization and streamlining, together with both old and new ideas on governance and contribution of the CDM to sustainable development

Enabling optimal energy options under the Clean Development Mechanism

International Nuclear Information System (INIS)

Gilau, Asmerom M.; Van Buskirk, Robert; Small, Mitchell J.

2007-01-01

This paper addresses the cost effectiveness of renewable energy technologies in achieving low abatement costs and promoting sustainable developments under the Clean Development Mechanism (CDM). According to the results of our optimal energy option's analysis, at project scale, compared with a diesel-only energy option, photovoltaic (PV)-diesel (PVDB), wind-diesel (WDB) and PV-wind-diesel (PVWDB) hybrids are very cost-effective energy options. Moreover, energy options with high levels of renewable energy, including 100% renewables, have the lowest net present cost and they are already cost effective without CDM. On the other hand, while the removal of about 87% carbon dioxide emissions could be achieved at negative cost, initial investment could increase by a factor of 40, which is one of the primary barriers hindering wider renewable energy applications in developing countries, among others. Thus, in order to increase developing countries' participation in the carbon market, CDM policy should shift from a purely market-oriented approach to investigating how to facilitate renewable energy projects through barrier removal. Thus, we recommend that further research should focus on how to efficiently remove renewable energy implementation barriers as a means to improve developing countries' participation in meaningful emission reduction while at the same time meeting the needs of sustainable economic development

Etude Climat no. 37 '10 lessons from 10 years of the CDM'

International Nuclear Information System (INIS)

Shishlov, Igor; Bellassen, Valentin

2012-01-01

Among the publications of CDC Climat Research, 'Climate Reports' offer in-depth analyses on a given subject. This issue addresses the following points: The Clean Development Mechanism (CDM) is the first and by far the largest carbon offset instrument in the world. To date, it is the only market based on an environmental commodity which managed to attract several billions of euros of private capital on an annual basis. Being the first-of-a-kind climate change mitigation instrument, the CDM followed a 'learning by doing' pattern undergoing numerous reforms throughout its more than 10-year history. Although the post-2012 fate of the mechanism remains uncertain, one should not 'throw out the baby with the bath water' as the lessons from the CDM experience may be useful not only for the CDM reform but also for new market instruments

Carbon market risks and rewards: Firm perceptions of CDM investment decisions in Brazil and India

International Nuclear Information System (INIS)

Hultman, Nathan E.; Pulver, Simone; Guimarães, Leticia; Deshmukh, Ranjit; Kane, Jennifer

2012-01-01

The carbon market experiences of Brazil and India represent policy success stories under several criteria. A careful evaluation, however, reveals challenges to market development that should be addressed in order to make the rollout of a post-2012 CDM more effective. We conducted firm-level interviews covering 82 CDM plants in the sugar and cement sectors in Brazil and India, focusing on how individual managers understood the potential benefits and risks of undertaking clean development mechanism (CDM) investments. Our results indicate that the CDM operates in a far more complex way in practice than that of simply adding a marginal increment to a project's internal rate of return. Our results indicate the following: first, although anticipated revenue played a central role in most managers' decisions to pursue CDM investments, there was no standard practice to account for financial benefits of CDM investments; second, some managers identified non-financial reputational factors as their primary motivation for pursuing CDM projects; and third, under fluctuating regulatory regimes with real immediate costs and uncertain CDM revenue, managers favored projects that often did not require carbon revenue to be viable. The post-2012 CDM architecture can benefit from incorporating these insights, and in particular reassess goals for strict additionality and mechanisms for achieving it.

Fiscal 1998 research report. Research on the possibility of promoting CDM project through technology transfer with plant exports; 1998 nendo chosa hokokusho. Plant yushutsugata gijutsu iten wo tsujita CDM project suishin kanosei ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Study was made on promotion of CDM (clean development mechanism) project through technology transfer with plant exports. Although CDM system was provided in COP3 on climate change held in Kyoto in 1997, its detailed rules including project approval are yet undecided, and only the schedule to provide the detailed rules until COP6 in 2000 was decided in COP4 in 1998. The common recognition that the CDM project with plant exports produces various merits for both Japan and the partner country is increasing. However, from the viewpoint of forming concrete CDM projects, most Japanese enterprises are passive in approach to the CDM project because of no detailed design of CDM, uncertain profitability and procedures, and avoidance of additional burdens. Plant export is also difficult because of the fact that assessment of a new project is difficult. Enterprises' deeper recognition on the CDM project, and a governmental integrated support system are desirable. (NEDO)

FEASIBILITY AND FINANCIAL ISSUES OF CLEAN PROJECT DEVELOPMENT MECHANISM IN ARGENTINA

Directory of Open Access Journals (Sweden)

García Fronti, Inés

2013-01-01

Full Text Available The objective of the research is to determine the current status and perspectives presented in Argentina in 2011 for different stakeholders regarding the development, execution and implementation of projects of clean development mechanism (CDM under the Kioto Protocol, with emphasis on the analysis of accounting issues.In the Argentinean research there is an analysis of the accounting issues under discussion and -taking as theirtory the Brazilian study mentioned- has surveyed and interviewed stakeholders belonging to government agencies, professional bodies such as councils accounting professionals in economics from different jurisdictions, academics, consultants and companies that deal or CDM projects plan to address issues relating to general and their views on potential regulations from bodies of the accounting profession and/or governmental and motivation of business and accounting issues of CDM projects such as moments of recognition of accounting entries and the different forms of the same recognition. The results showed that knowledge on the subject of stakeholders is initial but is possible an important increase in the future, accompanied by the development in Argentina of such projects.

Future restrictions for sinks in the CDM. How about a cap on supply?

International Nuclear Information System (INIS)

Forner, C.; Jotzo, F.

2002-01-01

The first commitment period of the Kyoto Protocol is expected to result in only a small role for the Clean Development Mechanism (CDM), including afforestation and reforestation projects. Wide ranging concerns regarding sinks in the CDM have been reflected in the Marrakech Accords capping the total amount of emission offsets from sinks projects to be used by Annex I countries. Decisions about the second commitment period and beyond are likely to be of far greater importance for these projects. This paper contributes to the discussion on how caps on sinks under the CDM could be used to obtain overall improved outcomes for developing countries. We examine two distinctive ways in which quantitative caps on sinks in the CDM can be implemented: one, restricting the use of sinks CERs to meet targets, as under the Marrakech Accords (a cap on demand); and two, restricting supply of sink CERs using a quota system. We argue in favour of a supply side cap, if Parties are to preserve the idea of limiting sinks in the CDM. Limiting the supply of credits could lead to better financial outcomes for developing countries as a whole, make higher-cost projects viable which may have better sustainability impacts, and provide an alternative to deal with equity concerns between developing countries

CDM Country Guide for The Philippines

International Nuclear Information System (INIS)

2006-01-01

Under the Integrated Capacity Strengthening for the CDM (ICS-CDM) programme, IGES presents the CDM Country Guides, a series of manuals on CDM project development for Cambodia, China, India, Indonesia, the Philippines, and Thailand. These guidebooks aim at facilitating CDM project developments in Asia by providing essential information to both project developers and potential investors. This volume is on The Philippines

CDM potential of bagasse cogeneration in India

International Nuclear Information System (INIS)

Purohit, Pallav; Michaelowa, Axel

2007-01-01

So far, the cumulative capacity of renewable energy systems such as bagasse cogeneration in India is far below their theoretical potential despite government subsidy programmes. One of the major barriers is the high investment cost of these systems. The Clean Development Mechanism (CDM) provides industrialized countries with an incentive to invest in emission reduction projects in developing countries to achieve a reduction in CO 2 emissions at lowest cost that also promotes sustainable development in the host country. Bagasse cogeneration projects could be of interest under the CDM because they directly displace greenhouse gas emissions while contributing to sustainable rural development. This study assesses the maximum theoretical as well as the realistically achievable CDM potential of bagasse cogeneration in India. Our estimates indicate that there is a vast theoretical potential of CO 2 mitigation by the use of bagasse for power generation through cogeneration process in India. The preliminary results indicate that the annual gross potential availability of bagasse in India is more than 67 million tonnes (MT). The potential of electricity generation through bagasse cogeneration in India is estimated to be around 34 TWh i.e. about 5575 MW in terms of the plant capacity. The annual CER potential of bagasse cogeneration in India could theoretically reach 28 MT. Under more realistic assumptions about diffusion of bagasse cogeneration based on past experiences with the government-run programmes, annual CER volumes by 2012 could reach 20-26 million. The projections based on the past diffusion trend indicate that in India, even with highly favorable assumptions, the dissemination of bagasse cogeneration for power generation is not likely to reach its maximum estimated potential in another 20 years. CDM could help to achieve the maximum utilization potential more rapidly as compared to the current diffusion trend if supportive policies are introduced

Economic Impact of CDM Implementation through Alternate Energy Resource Substitution

Directory of Open Access Journals (Sweden)

K.J. Sreekanth

2013-02-01

Full Text Available Since the Kyoto protocol agreement, Clean Development Mechanism (CDM hasgarnered large emphasis in terms of certified emission reductions (CER not only amidst the globalcarbon market but also in India. This paper attempts to assess the impact of CDM towardssustainable development particularly in rural domestic utility sector that mainly includes lightingand cooking applications, with electricity as the source of energy. A detailed survey has undertakenin the state of Kerala, in southern part of India to study the rural domestic energy consumptionpattern. The data collected was analyzed that throws insight into the interrelationships of thevarious parameters that influence domestic utility sector pertaining to energy consumption byusing electricity as the source of energy. The interrelationships between the different parameterswere modeled that optimizes the contribution of electricity on domestic utility sector. The resultswere used to estimate the feasible extent of CO2 emission reduction through use of electricity as theenergy resources, vis-à-vis its economic viability through cost effectiveness. The analysis alsoprovides a platform for implementing CDM projects in the sector and related prospects withrespects to the Indian scenario.

Optimal sampling plan for clean development mechanism energy efficiency lighting projects

International Nuclear Information System (INIS)

Ye, Xianming; Xia, Xiaohua; Zhang, Jiangfeng

2013-01-01

Highlights: • A metering cost minimisation model is built to assist the sampling plan for CDM projects. • The model minimises the total metering cost by the determination of optimal sample size. • The required 90/10 criterion sampling accuracy is maintained. • The proposed metering cost minimisation model is applicable to other CDM projects as well. - Abstract: Clean development mechanism (CDM) project developers are always interested in achieving required measurement accuracies with the least metering cost. In this paper, a metering cost minimisation model is proposed for the sampling plan of a specific CDM energy efficiency lighting project. The problem arises from the particular CDM sampling requirement of 90% confidence and 10% precision for the small-scale CDM energy efficiency projects, which is known as the 90/10 criterion. The 90/10 criterion can be met through solving the metering cost minimisation problem. All the lights in the project are classified into different groups according to uncertainties of the lighting energy consumption, which are characterised by their statistical coefficient of variance (CV). Samples from each group are randomly selected to install power meters. These meters include less expensive ones with less functionality and more expensive ones with greater functionality. The metering cost minimisation model will minimise the total metering cost through the determination of the optimal sample size at each group. The 90/10 criterion is formulated as constraints to the metering cost objective. The optimal solution to the minimisation problem will therefore minimise the metering cost whilst meeting the 90/10 criterion, and this is verified by a case study. Relationships between the optimal metering cost and the population sizes of the groups, CV values and the meter equipment cost are further explored in three simulations. The metering cost minimisation model proposed for lighting systems is applicable to other CDM projects as

A real option-based model for promoting sustainable energy projects under the clean development mechanism

International Nuclear Information System (INIS)

Lee, Hyounkyu; Park, Taeil; Kim, Byungil; Kim, Kyeongseok; Kim, Hyoungkwan

2013-01-01

The clean development mechanism (CDM) provides a way of assisting sustainable development in developing countries for developed countries to reduce greenhouse gas (GHG) emissions. Despite its intended benefits, the primary CDM market decreased from US$5.8 billion in 2006 to US$1.5 billion in 2010. One of the primary reasons for the reduction of market size is that developed countries as investors have a high level of risks caused by the volatility of the market price for certified emission reductions (CERs). Another issue to be resolved is that developing countries as host countries cannot claim any right to the CERs produced on their own land. This paper presents a real option-based model for both parties (developed and developing countries) to have their fair share of profits and risks by controlling the uncertainty associated with the future value of CERs. A case study illustrated that the proposed model can effectively attract investors to CDM projects leading to mitigation of climate change. - Highlights: ► This study focused on the risks associated with the uncertainty of future CER value in CDM projects. ► A real option-based model was developed for both parties in CDM to have fair share of profit and risk. ► Key variables and boundary conditions were identified for application of real option to CDM. ► The model allowed both parties to own options, which have an identical value. ► Hydropower plant projects in Indonesia were used to illustrate the implementation of the model

Sustainable waste management in Africa through CDM projects.

Science.gov (United States)

Couth, R; Trois, C

2012-11-01

Only few Clean Development Mechanism (CDM) projects (traditionally focussed on landfill gas combustion) have been registered in Africa if compared to similar developing countries. The waste hierarchy adopted by many African countries clearly shows that waste recycling and composting projects are generally the most sustainable. This paper undertakes a sustainability assessment for practical waste treatment and disposal scenarios for Africa and makes recommendations for consideration. The appraisal in this paper demonstrates that mechanical biological treatment of waste becomes more financially attractive if established through the CDM process. Waste will continue to be dumped in Africa with increasing greenhouse gas emissions produced, unless industrialised countries (Annex 1) fund carbon emission reduction schemes through a replacement to the Kyoto Protocol. Such a replacement should calculate all of the direct and indirect carbon emission savings and seek to promote public-private partnerships through a concerted support of the informal sector. Copyright © 2012 Elsevier Ltd. All rights reserved.

Cleaner generation, free-riders, and environmental integrity: clean development mechanism and the power sector

Energy Technology Data Exchange (ETDEWEB)

Bernow, Stephen; Kartha, Sivan; Lazarus, Michael; Page, Tom [Tellus Institute and Stockholm Environmental Institute-Boston Center, Boston, MA (United States)

2001-06-01

This article provides a first-cut estimate of the potential impacts of the clean development mechanism (CDM) on electricity generation and carbon emissions in the power sector of non-Annex 1 countries. We construct four illustrative CDM regimes that represent a range of approaches under consideration within the climate community. We examine the impact of these CDM regimes on investments in new generation, under illustrative carbon trading prices of US$ 10 and 100/tC. In the cases that are most conductive to CDM activity, roughly 94% of new generation investments remains identical to the without-CDM situation, with only 6% shifting from higher to lower carbon intensity technologies. We estimate that the CDM would bolster renewable energy generation by as little as 15% at US$ 10/tC, or as much as 300% at US$ 100/tC. A striking finding comes from our examination of the potential magnitude of the 'free-rider' problem, i.e. crediting of activities that will occur even in the absence of the CDM. The CDM is intended to be globally carbon-neutral --- a project reduces emissions in the host country but generates credits that increase emissions in the investor country. However, to the extent that unwarranted credits are awarded to non-additional projects, the CDM would increase global carbon emissions above the without-CDM emissions level. Under two of the CDM regimes considered, cumulative free-riders credits total 250-600MtC through the end of the first budget period in 2012. This represents 10-23% of the likely OECD emissions reduction requirement during the first budget period. Since such a magnitude of free-rider credits from non-additional CDM projects could threaten the environmental integrity of the Kyoto protocol, it is imperative that policy makers devise CDM rules that encourage legitimate projects, while effectively screening out non-additional activities. (Author)

Primer on CDM programme of activities

Energy Technology Data Exchange (ETDEWEB)

Hinostroza, M. (UNEP Risoe Centre, Roskilde (Denmark)); Lescano, A.D. (A2G Carbon Partners (Peru)); Alvarez, J.M. (Ministerio del Ambiente del Peru (Peru)); Avendano, F.M. (EEA Fund Management Ltd. (United Kingdom)

2009-07-01

As an advanced modality introduced in 2005, the Programmatic CDM (POA) is expected to address asymmetries of participation, especially of very small-scale project activities in certain areas, key sectors and many countries with considerable potential for greenhouse gas emission reductions, not reached by the traditional single-project-based CDM. Latest experiences with POAs and the recently finalized official guidance governing the Programmatic CDM are the grassroots of this Primer, which has the purpose of supporting the fully understanding of rules and procedures of POAs by interpreting them and analyzing real POA cases. Professional and experts from the public and private entities have contributed to the development of this Primer, produced by the UNEP Risoe Centre, as part of knowledge support activities for the Capacity Development for the CDM (CD4CDM) project. The overall objective of the CD4CDM is to develop the capacities of host countries to identify, design, approve, finance, implement CDM projects and commercialize CERs in participating countries. The CDM4CDM is funded by the Netherlands Ministry of Foreign Affairs. (author)

Technology transfer by CDM projects: A comparison of Brazil, China, India and Mexico

International Nuclear Information System (INIS)

Dechezlepretre, Antoine; Glachant, Matthieu; Meniere, Yann

2009-01-01

In a companion paper [Dechezlepretre, A., Glachant, M., Meniere, Y., 2008. The Clean Development Mechanism and the international diffusion of technologies: An empirical study, Energy Policy 36, 1273-1283], we gave a general description of technology transfers by Clean Development Mechanism (CDM) projects and we analyzed their drivers. In this paper, we use the same data and similar econometric models to explain inter-country differences. We focus on 4 countries gathering about 75% of the CDM projects: Brazil, China, India and Mexico. Sixty eight percent of Mexican projects include an international transfer of technology. The rates are, respectively, 12%, 40% and 59% for India, Brazil and China. Our results show that transfers to Mexico and Brazil are mainly related to the strong involvement of foreign partners and good technological capabilities. Besides a relative advantage with respect to these factors, the higher rate of international transfers in Mexico seems to be due to a sector-composition effect. The involvement of foreign partners is less frequent in India and China, where investment opportunities generated by fast growing economies seem to play a more important role in facilitating international technology transfers through the CDM. International transfers are also related to strong technology capabilities in China. In contrast, the lower rate of international transfer (12%) in India may be due to a better capability to diffuse domestic technologies

Technology and knowledge transfer from Annex 1 countries to non Annex 2 countries under the Kyoto Protocol's Clean Development Mechanism (CDM). An empirical case study of CDM projects implemented in Malaysia

Energy Technology Data Exchange (ETDEWEB)

Hansen, Ulrich Elmer

2008-10-15

The CDM constitutes a central element in political discussions on climate change concerning means to facilitate transfer of technology and knowledge, regarding greenhouse gas (GHG) mitigation technologies, from Annex 1 countries to Non Annex 1 countries. The purpose of this thesis is therefore to answer the question of what role the CDM plays in relation to transfer of technology and knowledge. The thesis relies on multiple sources of qualitative data and is conducted as a multiple case study of thirteen CDM projects implemented in Malaysia. It focuses on the companies involved in implementation of specific technologies in these projects and the channels that can facilitate the transfer process. The aim of the thesis is therefore to provide insights into the dynamics of technology transfer at the micro-level. An analytical framework is put forward on which it can be concluded that the CDM only plays a role in one out of the thirteen projects examined. The thesis may contribute to provide a background on which future provisions concerning technology transfer in the CDM, and/or other mechanisms that involve GHG mitigation activities in Non Annex 1 countries. (au)

CO2 emissions mitigation potential of solar home systems under clean development mechanism in India

International Nuclear Information System (INIS)

Purohit, Pallav

2009-01-01

The Government of India has taken several initiatives for promotion of solar energy systems in the country during the last two decades. A variety of policy measures have been adopted which include provision of financial and fiscal incentives to the potential users of solar energy systems however, only 0.4 million solar home systems (SHSs) have been installed so far that is far below their respective potential. One of the major barriers is the high costs of investments in these systems. The clean development mechanism (CDM) of the Kyoto Protocol provides industrialized (Annex-I) countries with an incentive to invest in emission reduction projects in developing (non-Annex-I) countries to achieve a reduction in carbon dioxide (CO 2 ) emissions at lowest cost that also promotes sustainable development in the host country. SHSs could be of interest under the CDM because they directly displace greenhouse gas (GHG) emissions while contributing to sustainable rural development, if developed correctly. In this study an attempt has been made to estimate the CO 2 mitigation potential of SHSs under CDM in India.

Optimal sampling plan for clean development mechanism lighting projects with lamp population decay

International Nuclear Information System (INIS)

Ye, Xianming; Xia, Xiaohua; Zhang, Jiangfeng

2014-01-01

Highlights: • A metering cost minimisation model is built with the lamp population decay to optimise CDM lighting projects sampling plan. • The model minimises the total metering cost and optimise the annual sample size during the crediting period. • The required 90/10 criterion sampling accuracy is satisfied for each CDM monitoring report. - Abstract: This paper proposes a metering cost minimisation model that minimises metering cost under the constraints of sampling accuracy requirement for clean development mechanism (CDM) energy efficiency (EE) lighting project. Usually small scale (SSC) CDM EE lighting projects expect a crediting period of 10 years given that the lighting population will decay as time goes by. The SSC CDM sampling guideline requires that the monitored key parameters for the carbon emission reduction quantification must satisfy the sampling accuracy of 90% confidence and 10% precision, known as the 90/10 criterion. For the existing registered CDM lighting projects, sample sizes are either decided by professional judgment or by rule-of-thumb without considering any optimisation. Lighting samples are randomly selected and their energy consumptions are monitored continuously by power meters. In this study, the sampling size determination problem is formulated as a metering cost minimisation model by incorporating a linear lighting decay model as given by the CDM guideline AMS-II.J. The 90/10 criterion is formulated as constraints to the metering cost minimisation problem. Optimal solutions to the problem minimise the metering cost whilst satisfying the 90/10 criterion for each reporting period. The proposed metering cost minimisation model is applicable to other CDM lighting projects with different population decay characteristics as well

Additionality in projects of clean development mechanisms (CDM) and cogeneration in Brazilian sugar and alcohol sector; Adicionalidade em projetos de MDL (mecanismo de desenvolvimento limpo) e a cogeracao no setor sucroalcooleiro brasileiro

Energy Technology Data Exchange (ETDEWEB)

Leme, Rodrigo Marcelo; Cunha, Kamyla Borges da; Walter, Arnaldo [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Programa de Pos-graduaccao em Planejamento de Sistemas Energeticos

2004-07-01

The emissions of Greenhouse Gases (GHG), the resulting intensification of the greenhouse effect and its relation with climate change, have been pointed out as serious global problem. For this reason, the Kyoto Protocol was established, within the United Nations Framework Convention on Climate Change (UNFCCC), with the objective of setting up directives and goals to the stabilization and reduction of GHG emissions. In its Article 12, the Kyoto Protocol institutes the Clean Development Mechanism, an important flexibility instrument to Annex 1 Parties in achieving their emission reduction targets through project implementation in developing countries (non-Annex 1 Parties), promoting Sustainable Development and incurring and lesser costs of emission reductions. Any project, to be qualified within the Clean Development Mechanism, must fulfill the eligibility criterions fixed by the Kyoto Protocol, which are: promotion of Sustainable Development and assurance of the project additionality. In Brazil, the sugarcane industry is a promising opportunity of developing these kind of projects, specially by means of the cogeneration from sugarcane residues. This paper analyses the Additionality of this sort of projects, in the light of the criterions defined by the UNFCCC, with special attention to the two Brazilian cases registered in the CDM Methodologies Panel. (author)

LULUCF-based CDM. Too much ado for a small carbon market

International Nuclear Information System (INIS)

Bernoux, M.; Feller, C.; Eschenbrenner, V.; Cerri, C.C.; Melillo, J.M.

2002-01-01

The Bonn agreement reached in July at the sixth conference of the parties (COP) to the FCCC states 'that for the first commitment period, the total of additions to and subtractions from the assigned amount of a party resulting from eligible LULUCF activities under Article 12 (i.e. CDM), shall not exceed 1% of base-year emissions of that party, times five'. The most probable size of this LULUCF-CDM (land use, land-use change and forestry - clean development mechanism) market is analyzed in light of each Annex I party's actual and projected emissions and policies. Results show that the market size would be only about 110 Mt CO2 eq. for 2000-2012, representing a maximum global market value of about US$ 876 million

Inter-provincial clean development mechanism in China: A case study of the solar PV sector

International Nuclear Information System (INIS)

Jacques, David A.; Guan, Dabo; Geng, Yong; Xue, Bing; Wang, Xiaoguang

2013-01-01

With ever growing urgency, climate change mitigation is fast becoming a priority for China. A successful policy of implementing and expanding sustainable development and the use of renewable energy is therefore vital. As well as long-term and near-term targets for installed capacity of renewable energy, in its 12th five-year plan, China has created strict and ambitious carbon intensity targets for each province. This study proposes an inter-provincial clean development mechanism to assist in meeting these targets. This mechanism will create potential co-benefits of assisting in sustainable development in lesser developed provinces, increasing local air quality and supporting the growth of China's renewable energy sector. This paper also highlights the potential that this inter-provincial clean development mechanism has in accelerating the growth of the domestic solar photovoltaics (PV) sector, for which the market in China is still in its infancy. - Highlights: ► We recognise the necessity for each province in China to reduce its GHG emissions. ► We assess the potential of a national scale a CDM style mechanism for China. ► We consider the effect that the national CDM could have on solar PV in China

Estimation and diminution of CO2 emissions by clean development mechanism option at power sector in Oman

Energy Technology Data Exchange (ETDEWEB)

Singh Solanki, Parmal; Sarma Mallela, Venkateswara [Caledonian (University) College of Engineering, Muscat (Oman); Zhou, Chengke [Glasgow Caledonian University, Glasgow, Scotland (United Kingdom)

2013-07-01

Carbon dioxide (CO2) is one of the major pollutants among greenhouse gases emitted by fossil fuel based power plants and responsible for environmental tribulations. Therefore diminution of carbon dioxide level by Clean Development Mechanism (CDM) is now serious concern worldwide. This paper evaluates the emission factors of national electric grid in Oman and proposes a wind energy based CDM project to diminish the CO2 emissions. Estimations show that operating margin emission factors of national grid during five years lies in the range of 0.74 to 0.69 kg CO2/kWh. Further, proposed CDM project revealed the annual baseline emissions reduction of 45552 ton CO2 and able to earn the revenue of US$ 61.49 million by certify emission reductions in the first crediting period of project. Paper also critically analyse the opportunities for CDM project, its lucrative aspect, barrier and challenges.

Treatment analysis of incentive politics for renewable energy projects in the clean development mechanism (CDM): the Brazilian case; Analise do tratamento das politicas de incentivos a projetos de energias renovaveis no mecanismo de desenvolvimento limpo (MDL): o caso brasileiro

Energy Technology Data Exchange (ETDEWEB)

Medeiros, Anamelia; Hauser, Philipp, Emails: anameliam@yahoo.com.br, philipphauser@web.de

2010-07-01

This paper analyses the politics for mitigation recently adopted by the Brazil, and discuss his treatment under the rules of CDM, viewing to contribute for a transparent solution which to allow the conciliation global and national politics for the clean expansion of the energy sector in Brazil.

Clean development mechanism PDD guidebook: Navigating the pitfalls

Energy Technology Data Exchange (ETDEWEB)

Kamel, S. (ed.)

2005-11-01

This guidebook is designed to help readers navigate the pitfalls of preparing a Project Design Document (PDD) for Clean Development Mechanism (CDM) projects. The purpose of a PDD is to prepare project information for relevant stakeholders. These stakeholders include the investment community, the Designated Operating Entity (DOE) performing validation of the project, the CDM Executive Board (EB), the Designated National Authorities (DNA) of the involved countries and the local population. The PDD, together with the validation report and the approval letter of the DNA, are the basis for the registration of the project and its recognition as a credible CDM project. The PDD is about the project's design that is, how the project intends to reduce greenhouse gas (GHG) emissions below those levels that would otherwise have been emitted. Each and every CDM project is unique, from the project design to the application of even the simplest baseline methodology. Some of the projects submitted for validation may be very efficient in reducing emissions and score well in terms of economic, social and environmental benefits, but may still not qualify as CDM projects. Experience has shown that the information needed to judge a suitability of a project for the CDM is vast and can take months to assemble. Also, the time required to assemble relevant information increases with the number and diversity of stakeholders involved and the complexity of the information itself. This guidebook is based on a review of all PDDs submitted to DNV for validation. The advice given and the pitfalls described in this guidebook are, therefore, based on day-to-day, hands-on experience and real instances of mistakes made in submissions. In summary, then, this guidebook takes a practical stance: it is concerned with the practical issues of how to get projects through the validation process. It will help those submitting a PDD by: 1) Describing the most common and costly mistakes made in the process

General equilibrium effects of a supply side GHG mitigation option under the Clean Development Mechanism.

Science.gov (United States)

Timilsina, Govinda R; Shrestha, Ram M

2006-09-01

The Clean Development Mechanism (CDM) under the Kyoto Protocol to the United Nations Framework Convention on Climate Change is considered a key instrument to encourage developing countries' participation in the mitigation of global climate change. Reduction of greenhouse gas (GHG) emissions through the energy supply and demand side activities are the main options to be implemented under the CDM. This paper analyses the general equilibrium effects of a supply side GHG mitigation option-the substitution of thermal power with hydropower--in Thailand under the CDM. A static multi-sector general equilibrium model has been developed for the purpose of this study. The key finding of the study is that the substitution of electricity generation from thermal power plants with that from hydropower plants would increase economic welfare in Thailand. The supply side option would, however, adversely affect the gross domestic product (GDP) and the trade balance. The percentage changes in economic welfare, GDP and trade balance increase with the level of substitution and the price of certified emission reduction (CER) units.

Climate Change Policy Measures in Japan: NEDO's Activities to Promote CDM/JI

International Nuclear Information System (INIS)

Fukasawa, Kazunori; Seki, Kazuhiko; Sakurai, Takeshi

2004-01-01

The Kyoto Protocol, which obliges developed countries to reduce emissions of greenhouse gases (GHG), was adopted at the third session of the conference of the parties to the United Nations Framework Convention on Climate Change (UNFCCC) in Kyoto, Japan, on I I December 1997. Japan subsequently ratified the Kyoto Protocol in 2002 and is required thereunder to reduce GHG emissions by 6% below 1990 levels by 2008-2012. Japan, having already tackled development and promotion of energy conservation technologies after the second oil crisis, emits the lowest level of CO 2 of developed countries approximately 9.4 tons per capita in the year 2000. Consequently, Japan is able to contribute to CO 2 emissions reduction in developing economies as well as in economies in transition by application of Japan's energy conservation technologies. Because the Clean Development Mechanism (CDM) and Joint implementation (JI) of the Kyoto Mechanisms are efficient tools, the Japanese government's policy towards emission reduction makes active use of CDM/JI, thereby supporting domestic efforts in realizing Japan's reduction commitment. The Ministry of Economy, Trade and Industry (METI) of Japan is one of the key ministries to administer Governmental policy making on climate change, and is undertaking establishment of a system to facilitate the Kyoto Mechanisms. The New Energy and Industrial Technology Development Organization (NEDO), under the jurisdiction of METI, supports CDM and JI project activities implemented by Japanese private sector enterprises. In this report, the authors briefly introduce climate change policy measures in Japan and NEDO's activities to promote CDM/Jl. (Author)

Composting projects under the Clean Development Mechanism: Sustainable contribution to mitigate climate change

International Nuclear Information System (INIS)

Rogger, Cyrill; Beaurain, Francois; Schmidt, Tobias S.

2011-01-01

The Clean Development Mechanism (CDM) of the Kyoto Protocol aims to reduce greenhouse gas emissions in developing countries and at the same time to assist these countries in sustainable development. While composting as a suitable mitigation option in the waste sector can clearly contribute to the former goal there are indications that high rents can also be achieved regarding the latter. In this article composting is compared with other CDM project types inside and outside the waste sector with regards to both project numbers and contribution to sustainable development. It is found that, despite the high number of waste projects, composting is underrepresented and a major reason for this fact is identified. Based on a multi-criteria analysis it is shown that composting has a higher potential for contribution to sustainable development than most other best in class projects. As these contributions can only be assured if certain requirements are followed, eight key obligations are presented.

Addressing carbon Offsetters’ Paradox: Lessons from Chinese wind CDM

International Nuclear Information System (INIS)

He, Gang; Morse, Richard

2013-01-01

The clean development mechanism (CDM) has been a leading international carbon market and a driving force for sustainable development. But the eruption of controversy over offsets from Chinese wind power in 2009 exposed cracks at the core of how carbon credits are verified in the developing economies. The Chinese wind controversy therefore has direct implications for the design and negotiation of any successor to the Kyoto Protocol or future market-based carbon regimes. In order for carbon markets to avoid controversy and function effectively, the lessons from the Chinese wind controversy should be used to implement key reforms in current and future carbon policy design. The paper examines the application of additionality in the Chinese wind power market and draws implications for the design of effective global carbon offset policy. It demonstrates the causes of the wind power controversy, highlights underlying structural flaws, in how additionality is applied in China, the Offsetters' Paradox, and charts a reform path that can strengthen the credibility of global carbon markets. - Highlights: • We investigated 143 Chinese wind CDM projects by the eruption of the additionality controversy. • We examined the application of additionality in the Chinese wind power market. • We drew implications for the design of effective global carbon offset policy. • The underlying structural flaws of CDM, the Offsetters′ Paradox, was discussed. • We charted a reform path that can strengthen the credibility of global carbon markets

Technology choice and CDM projects in China: case study of a small steel company in Shandong Province

International Nuclear Information System (INIS)

Kaneko, Shinji; Yonamine, Asaka; Jung, Tae Yong

2006-01-01

Corporate motives and strategies of both investing and hosting country affect the outcomes of a clean development mechanism (CDM) project-who introduces what technology to whom-and result in large differences in economic viability and the CO 2 emission reductions. This is particularly true for steel industry in which steel making consists of many detailed and complex processes, a given strategy could produce cumulative effects of the individual technologies used, leading to large energy savings overall. The objective of this study is to demonstrate some analytical methods that can be used to quantitatively evaluate the impacts of technology selection on the profit performance of CDM projects. Specifically, in this study we analyze a CDM project to introduce energy saving technology from Japan to a small steel manufacturer in China's Shandong Province, and conduct a simulation of the quantitative relationships between various technology options and profitability. Based on these results, we examine the environmental and economic significance of technology selection for CDM projects. To take this further, we then reconsider the profitability of a project as typical FDI activity (i.e., without the CDM), and by comparing this outcome with the CDM case, we clarify the significance and potential of the CDM

Sustainable waste management in Africa through CDM projects

Energy Technology Data Exchange (ETDEWEB)

Couth, R. [CRECHE, Centre for Research in Environmental, Coastal and Hydrological Engineering, School of Engineering, University of KwaZulu-Natal, Durban 4041 (South Africa); Trois, C., E-mail: troisc@ukzn.ac.za [CRECHE, Centre for Research in Environmental, Coastal and Hydrological Engineering, School of Engineering, University of KwaZulu-Natal, Durban 4041 (South Africa)

2012-11-15

Highlights: Black-Right-Pointing-Pointer This is a compendium on GHG reductions via improved waste strategies in Africa. Black-Right-Pointing-Pointer This note provides a strategic framework for Local Authorities in Africa. Black-Right-Pointing-Pointer Assists LAs to select Zero Waste scenarios and achieve sustained GHG reduction. - Abstract: Only few Clean Development Mechanism (CDM) projects (traditionally focussed on landfill gas combustion) have been registered in Africa if compared to similar developing countries. The waste hierarchy adopted by many African countries clearly shows that waste recycling and composting projects are generally the most sustainable. This paper undertakes a sustainability assessment for practical waste treatment and disposal scenarios for Africa and makes recommendations for consideration. The appraisal in this paper demonstrates that mechanical biological treatment of waste becomes more financially attractive if established through the CDM process. Waste will continue to be dumped in Africa with increasing greenhouse gas emissions produced, unless industrialised countries (Annex 1) fund carbon emission reduction schemes through a replacement to the Kyoto Protocol. Such a replacement should calculate all of the direct and indirect carbon emission savings and seek to promote public-private partnerships through a concerted support of the informal sector.

Small-scale CDM projects in a competitive electricity industry: How good is a simplified baseline methodology?

International Nuclear Information System (INIS)

Shrestha, Ram M.; Abeygunawardana, A.M.A.K.

2007-01-01

Setting baseline emissions is one of the principal tasks involved in awarding credits for greenhouse gas emission (GHG) mitigation projects under the Clean Development Mechanism (CDM). An emission baseline has to be project-specific in order to be accurate. However, project-specific baseline calculations are subject to high transaction costs, which disadvantage small-scale projects. For this reason, the CDM-Executive Board (CDM-EB) has approved simplified baseline methodologies for selected small-scale CDM project categories. While the simplified methods help reduce the transaction cost, they may also result in inaccuracies in the estimation of emission reductions from CDM projects. The purpose of this paper is to present a rigorous economic scheduling method for calculating the GHG emission reduction in a hypothetical competitive electricity industry due to the operation of a renewable energy-based power plant under CDM and compare the GHG emission reduction derived from the rigorous method with that obtained from the use of a simplified (i.e., standardized) method approved by the CDM-EB. A key finding of the paper is that depending upon the level of power demand, prices of electricity and input fuels, the simplified method can lead to either significant overestimation or substantial underestimation of emission reduction due to the operation of renewable energy-based power projects in a competitive electricity industry

Status of implementation of the clean development mechanism in Brazil; Estado de implementacao do mecanismo de desenvolvimento limpo no Brasil

Energy Technology Data Exchange (ETDEWEB)

Cunha, Kamyla Borges da [Instituto de Energia e Meio Ambiente, Sao Paulo, SP (Brazil)], e-mail: kamyla_energia@terra.com.br; Walter, Arnaldo [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Programa de Pos-Graduacao em Planejamento de Sistemas Energeticos; Rei, Fernando Fernandes [Centro Universitario SENAC, Sao Paulo, SP (Brazil). Curso de Mestrado em Gestao Integrada

2006-07-01

Defined in the article 12 from Kyoto Protocol, the Clean Development Mechanism (CDM) was created as a market instrument. As a consequence, CDM projects distribution is becoming unequal among the regions of the globe and also among project activities types. Brazil is the second in number of projects and the third in emission reductions, but the market aspect of CDM is a factor that influences the domestic dynamics of CDM. In this way, the objective of this paper is to evaluate in which way the regional and technological differences between CDM projects are replicable in the national context. In order to meet this aim, it was assessed all Brazilian CDM projects that were submitted to UN until March 10{sup th} 2006. As a result, it could be identified that there is not any land use, land-use change and forestry (LULUCF CDM) projects, besides the Brazilian potential in this field, it could be noticed that the most part of Brazilian CDM projects is focused in renewable energy promotion, such as cogeneration with biomass and small hydro power plants and that there is a small number of projects related to energy efficiency. In addition, it was verified wide differences regarding regional distribution of projects and the predominance of unilateral initiatives. (author)

An Investigation into Kyoto Protocol's Clean Development ...

African Journals Online (AJOL)

CDM) as a transition mechanism to Kenya's green economy and the contribution of CDM projects towards sustainable development in Kenya. Accordingly, a positive checklist approach to sustainable development indicators was applied as ...

Renewable Energy Investment in Emerging Markets: Evaluating Improvements to the Clean Development Mechanism

Directory of Open Access Journals (Sweden)

Amy Tang

2014-06-01

Full Text Available In the past, industrialized countries have invested in or financed numerous renewable energy projects in developing countries, primarily through the Clean Development Mechanism (CDM of the Kyoto Protocol. However, critics have pointed to its bureaucratic structure, problems with additionality and distorted credit prices as ill-equipped to streamline renewable energy investment. In this paper, we simulate the impact of policy on investment decisions on whether or not to invest in wind energy infrastructure in India, Brazil and China. Data from 2,578 past projects as well as literature on investor behaviour is used to inform the model structure and parameters. Our results show that the CDM acts differently in each country and reveal that while streamlining the approval process and reconsidering additionality can lead to non-trivial increase in total investment, stabilizing policy and decreasing investment risk will do the most to spur investment.

Waste management CDM projects barriers NVivo 10® qualitative dataset.

Science.gov (United States)

Bufoni, André Luiz; de Sousa Ferreira, Aracéli Cristina; Oliveira, Luciano Basto

2017-12-01

This article contains one NVivo 10® file with the complete 432 projects design documents (PDD) of seven waste management sector industries registered as Clean Development Mechanism (CDM) under United Nations Framework Convention on Climate Change (UNFCCC) Kyoto Protocol Initiative from 2004 to 2014. All data analyses and sample statistics made during the research remain in the file. We coded PDDs in 890 fragments of text, classified in five categories of barriers (nodes): technological, financial, human resources, regulatory, socio-political. The data supports the findings of author thesis [1] and other two indexed publication in Waste Management Journal: "The financial attractiveness assessment of large waste management projects registered as clean development mechanism" and "The declared barriers of the large developing countries waste management projects: The STAR model" [2], [3]. The data allows any computer assisted qualitative content analysis (CAQCA) on the sector and it is available at Mendeley [4].

Co-benefits of including CCS projects in the CDM in India's power sector

International Nuclear Information System (INIS)

Eto, R.; Murata, A.; Uchiyama, Y.; Okajima, K.

2013-01-01

This study examines the effects of the inclusion of the co-benefits on the potential installed capacity of carbon dioxide capture and storage (CCS) projects with a linear programming model by the clean development mechanism (CDM) in India's power sector. It is investigated how different marginal damage costs of air pollutants affect the potential installed capacity of CCS projects in the CDM with a scenario analysis. Three results are found from this analysis. First, large quantity of IGCC with CCS becomes realizable when the certified emission reduction (CER) prices are above US$56/tCO 2 in the integrated Northern, Eastern, Western, and North-Eastern regional grids (NEWNE) and above US $49/tCO 2 in the Southern grid. Second, including co-benefits contributes to decrease CO 2 emissions and air pollutants with introduction of IGCC with CCS in the CDM at lower CER prices. Third, the effects of the co-benefits are limited in the case of CCS because CCS reduces larger amount of CO 2 emissions than that of air pollutants. Total marginal damage costs of air pollutants of US$250/t and US$200/t lead to CER prices of US$1/tCO 2 reduction in the NEWNE grid and the Southern grid. - Highlights: • We estimate effects of co-benefits on installed capacity of CCS projects in the CDM. • We develop a linear programming (LP) model of two grids of India. • Including co-benefits contributes to introduce IGCC with CCS in the CDM at lower CER prices

Transaction costs of unilateral CDM projects in India-results from an empirical survey

International Nuclear Information System (INIS)

Krey, Matthias

2005-01-01

Recently, transaction costs in the context of the Clean Development Mechanism (CDM) gained considerable attention as they were generally perceived to be significantly higher than for the other Kyoto Mechanisms. However, empirical evidence on the amount of transaction costs of CDM projects is very scarce. This paper presents the results from an empirical survey designed to quantify transaction costs of potential non-sink CDM projects in India. The definition of transaction costs of CDM projects was derived from recent literature and observations made in the current market for Certified Emission Reductions (CERs). During the survey, parts of transaction costs of 15 projects were quantified. An assessment of the results showed that specific transaction costs depend, to a large extent, on economies of scale in terms of total amount of CERs generated over the crediting period. Total transaction costs were quantified for seven projects. The costs range from 0.07 to 0.47 dollar/t CO 2 . As the projects have an emission reduction between 0.24 Mt CO 2 and 5.00 Mt CO 2 over the crediting period, the results support the assumption of Michaelowa et al. (Climate Policy 3 (2003) 273) that projects with emission reductions smaller than 0.20 Mt CO 2 are not economically viable at current CER prices

Financing the clean development mechanism through debt-for-efficiency swaps? Case study evidence from a Uruguayan wind farm project

DEFF Research Database (Denmark)

Cassimon, Danny; Prowse, Martin; Essers, Dennis

2011-01-01

As one of Kyoto’s three flexibility mechanisms for reducing the cost of compliance, the Clean Development Mechanism (CDM) allows the issuance of Certified Emission Reduction (CER) credits from offset projects in non-Annex I countries. Whilst much attention has focused on the widespread use...... this through analysing the use of a debt swap between Uruguay and Spain within a CDM wind farm project in Uruguay. The paper assesses this transaction according to a simple framework by which debt swaps can be evaluated: whether it delivers additional resources to the debtor country and/or debtor government...

Forest conservation and the clean development mechanism. Lessons from the Costa Rican protected areas project

International Nuclear Information System (INIS)

Voehringer, F.

2004-01-01

Deforestation is currently the source of about 20% of anthropogenic CO2 emissions. Avoided deforestation has, nonetheless, been ruled out as a Clean Development Mechanism (CDM) category in the Kyoto Protocol's first commitment period, because several methodological issues were considered too difficult to resolve. This paper explores whether CDM issues such as (1) carbon quantification, (2) additionality and baseline setting, (3) leakage risks, (4) non-permanence risks, and (5) sustainable development can be adequately dealt with in large, diversified forest conservation projects. To this aim, it studies the case of the Costa Rican Protected Areas Project (PAP), an Activities Implemented Jointly (AIJ) project which was meant to consolidate the national park system to avoid deforestation, promote the growth of secondary forests and regenerate pastures on an area that, in total, covers 10% of the national territory. The case study examines how the issues mentioned above have been addressed in the project design and in the certification process. It is found that baseline uncertainties are the major problem in this case. Nonetheless, the case suggests the possibility to address CDM issues by specific requirements for project design and very conservative and temporary crediting. Provided that other case studies support this conclusion, eligibility of well-designed forest conservation projects under the CDM in the second commitment period may be worth considering, given the secondary benefits of avoided deforestation

Risks and chances of combined forestry and biomass projects under the Clean Development Mechanism

Energy Technology Data Exchange (ETDEWEB)

Dutschke, Michael; Kapp, Gerald; Lehmann, Anna; Schaefer, Volkmar (Hamburg Inst. International Economics (Germany))

2006-06-15

The Clean Development Mechanism (CDM) aims at reducing greenhouse gas (GHG) emissions, while at the same time taking up CO{sub 2} from the atmosphere in vegetation by means of afforestation and reforestation. In spite of these options being complementary, rules and modalities for both project classes are being treated separately in the relevant decisions by the Conference of the Parties to the UN Framework Convention on Climate Change. The present study reviews the state of bioenergy use in developing countries, modalities and procedures under the CDM, and the potential for transaction cost reduction in climate mitigation projects. There are four potential types of combinations in the matrix between small-scale - large-scale / afforestation and reforestation - bioenergy activities. We develop criteria for assessing sustainable development benefits and present an example project for each of the potential project types. We find that the individual risks of single-category projects do not increase when combining project categories and that each combination holds potential for integrated sustainability benefits. Risks for local livelihoods do increase with project size, but a transparent, participatory planning phase is able to counterbalance smallholders' lack of negotiation power. Further research will have to develop concrete project examples and blueprints with approved CDM methodologies, thereby decreasing transaction costs and risk for all potential project partners. (au)

Report for fiscal 2000 investigations on Activities Implemented Jointly in China and promotion of transfer to CDM; 2000 nendo Chugoku ni okeru kyodo jisshi katsudo oyobi CDM eno iko suishin chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

It is purposed to promote the Activities Implemented Jointly (AIJ) and the clean development mechanism (CDM) intended of reducing carbon dioxide emission amount in China. Investigations have been performed on China's environment and energy problems, CDM assignments and transfer means, and project candidates. China emits a great amount of CO2 due to coal combustion, and the CO2 emission is anticipated to increase from the coal burning thermal power generation that may continue into the future. Countermeasures for the thermal power department as the object are required. Since 1997, China has been performing the AIJ project with Norway, Japan, and America, wherein such projects have been implemented with Japan as the dry coke fire extinguishing facility model project, the energy saving model project using alloy iron electric furnaces, and the model project to utilize effectively the refuse combustion waste heat. China is one of the countries in which the greenhouse effect gas emission reducing project can be performed at a minimum cost, who will be the important party in the CDM performed by the developed countries to achieve their obligation to reduce the greenhouse effect gas emission. (NEDO)

Local stakeholder participation in CDM and new climate mitigation mechanisms – case study of a small scale hydropower project in China

DEFF Research Database (Denmark)

Dong, Yan; Olsen, Karen Holm; Filzmoser, Eva

2014-01-01

and China’s stakeholder participation policies in environment impact assessment at project level, the PDD of this project and similar projects were analyzed providing an overall impression of the stakeholder participations process and results in such projects. Afterwards, we focused on a single case, where...... that the Clean Development Mechanism (CDM) Executive Board should collect information on practices for local stakeholder consultation in collaboration with the Designated National Authorities (DNA) Forum and provide technical assistance for the development of guidelines for local stakeholder participation......, if a country requests assistance. Learning from a case study of how local stakeholder participation is practiced in CDM in a small scale hydropower project in China, this paper identifies the strengths and weaknesses of how the concept is applied in practice. To understand the execution of both CDM policies...

Overview of UNEP's CDM activities. Enhancing a more equitable regional distribution of CDM project activities

Energy Technology Data Exchange (ETDEWEB)

2007-12-15

More than thirty months after the entry into force of the Kyoto Protocol, CDM transactions continue to gain momentum. By November 2007, 2,647 CDM projects are in the CDM pipeline. Of these, 827 are registered projects, and a further 154 are inthe registration process. The CDM Executive Board (CDM EB) has issued more than 82 million Certified Emissions Reductions (CER). In terms of number of projects by type of technology, renewables CDM projects are the leading type with 62% of the pipeline. However, N{sub 2}O, HFC and PFC projects have the biggest share (34%) of CERs expected to be generated by end of first commitment period. At the same time, more and more renewables and other non-industrial gases projects are going into the pipeline increasing their share of emissions reductions to be achieved. Geographically, the distribution of CDM projects has so far not been very equitable. A limited number of countries including China, India, Brazil and Mexico have captured the largest share of the global CDM project portfolio. Specific regions in the developing world, namely Sub-Saharan Africa, have been largely bypassed by the CDM market and are struggling to attract a decent number of CDM projects. In fact, of the total 2,647 projects, only 33 projects are in Sub-Saharan Africa where 21 of these are actually in South Africa, making the distribution even more skewed. (au)

Review of monitoring uncertainty requirements in the CDM

International Nuclear Information System (INIS)

Shishlov, Igor; Bellassen, Valentin

2014-10-01

In order to ensure the environmental integrity of carbon offset projects, emission reductions certified under the Clean Development Mechanism (CDM) have to be 'real, measurable and additional', which is ensured through the monitoring, reporting and verification (MRV) process. MRV, however, comes at a cost that ranges from several cents to EUR1.20 and above per ton of CO 2 e depending on the project type. This article analyzes monitoring uncertainty requirements for carbon offset projects with a particular focus on the trade-off between monitoring stringency and cost. To this end, we review existing literature, scrutinize both overarching monitoring guidelines and the 10 most-used methodologies, and finally we analyze four case studies. We find that there is indeed a natural trade-off between the stringency and the cost of monitoring, which if not addressed properly may become a major barrier for the implementation of offset projects in some sectors. We demonstrate that this trade-off has not been systematically addressed in the overarching CDM guidelines and that there are only limited incentives to reduce monitoring uncertainty. Some methodologies and calculation tools as well as some other offset standards, however, do incorporate provisions for a trade-off between monitoring costs and stringency. These provisions may take the form of discounting emissions reductions based on the level of monitoring uncertainty - or more implicitly through allowing a project developer to choose between monitoring a given parameter and using a conservative default value. Our findings support the introduction of an uncertainty standard under the CDM for more comprehensive, yet cost-efficient, accounting for monitoring uncertainty in carbon offset projects. (authors)

Economic and Environmental Performances of Small-Scale Rural PV Solar Projects under the Clean Development Mechanism: The Case of Cambodia

Directory of Open Access Journals (Sweden)

Ellen De Schepper

2015-09-01

Full Text Available The two core objectives of the Clean Development Mechanism (CDM are cost-effective emission reduction and sustainable development. Despite the potential to contribute to both objectives, solar projects play a negligible role under the CDM. In this research, the greenhouse gas mitigation cost is used to evaluate the economic and environmental performances of small-scale rural photovoltaic solar projects. In particular, we compare the use of absolute and relative mitigation costs to evaluate the attractiveness of these projects under the CDM. We encourage the use of relative mitigation costs, implying consideration of baseline costs that render the projects profitable. Results of the mitigation cost analysis are dependent on the baseline chosen. To overcome this drawback, we complement the analysis with a multi-objective optimization approach, which allows quantifying the trade-off between economic and environmental performances of the optimal technologies without requiring a baseline.

Clean development mechanism and off-grid small-scale hydropower projects: Evaluation of additionality

International Nuclear Information System (INIS)

Tanwar, Nitin

2007-01-01

The global climate change mitigation policies and their stress on sustainable development have made electrification of rural mountainous villages, using small hydro, an attractive destination for potential clean development mechanism (CDM) projects. This invariably involves judging the additionality of such projects. The paper suggests a new approach to judge the additionality of such stand-alone small hydropower projects. This has been done by breaking up additionality into two components: external and local. The external additionality is project developer dependent. For determining the local additionality, the paper takes into account the probability of a village getting electrified over a period of time, which is kept equal to the possible crediting period. This is done by defining an electrification factor (EF) whose value depends on the degree of isolation, financial constraints and institutional constraints encountered while electrifying a mountainous village. Using this EF, the additionality of a CDM project can be judged in a much easier and accurate way. The paper is based on the data and inputs gathered during site visits to many isolated villages located in the eastern Indian Himalayas

Clean Development Mechanism PDD Guidebook: Navigating the Pitfalls; 2. ed.

Energy Technology Data Exchange (ETDEWEB)

2008-04-15

This guidebook is designed to help readers navigate the pitfalls of preparing a Project Design Document (PDD) for Clean Development Mechanism (CDM) projects. This second edition also aims at helping project developers to navigate the pitfalls of preparing a Monitoring Report and be better prepared to face the verification process. The purpose of a PDD is to prepare project information for relevant stakeholders. These stakeholders include the investment community, the Designated Operating Entity (DOE) performing validation of the project, the CDM Executive Board (EB), the Designated National Authorities (DNA) of the involved countries and the local population. The PDD, together with the validation report and the approval letter of the DNA, are the basis for the registration of the project and its recognition as a credible CDM project. The PDD is about the project's design--that is, how the project intends to reduce greenhouse gas (GHG) emissions below those levels that would otherwise have been emitted1. Each and every CDM project is unique, from the project design to the application of even the simplest baseline methodology. Some of the projects submitted for validation may be very efficient in reducing emissions and score well in terms of economic, social and environmental benefits, but may still not qualify as CDM projects. Experience has shown that the information needed to judge the suitability of a project for the CDM is vast and can take months to assemble. Also, the time required to assemble relevant information increases with the number and diversity of stakeholders involved and the complexity of the information itself. The objective of the verification of emissions reduction is the review and ex post determination of the monitored emission reductions that have occurred during a specified verification period. The verification is about the project's reality--that is, how the project has been implemented as described in the registered PDD and is

Sweet carbon: An analysis of sugar industry carbon market opportunities under the clean development mechanism

International Nuclear Information System (INIS)

McNish, Tyler; Jacobson, Arne; Kammen, Dan; Gopal, Anand; Deshmukh, Ranjit

2009-01-01

Bagasse power generation projects provide a useful framework for evaluating several key aspects of the Clean Development Mechanism of the Kyoto Protocol. On the positive side, our analysis, which draws in part from a data set of 204 bagasse electricity generation projects at sugar mills, indicates that these projects provide Annex I country investors with a cost-effective means to achieve greenhouse gas emissions reductions. Our analysis also confirms that the marketplace for Clean Development Mechanism-derived offsets is robust and competitive. Moreover, bagasse projects appear to provide a positive example in a 'new wave' of clean energy investment that has replaced the earlier industrial gas projects. At the same time, we also identify two aspects of the CDM that demand improvement. First, the additionality standard needs to be tightened and made more transparent and consistent. Financial additionality should be required for all projects; however, any financial additionality test applied by the Clean Development Mechanism's Executive Board must be informed by the significant barriers faced by many projects. Second, the administrative processes for registration and verification of offsets need to be streamlined in order to prevent long registration time lags from chilling clean energy investment.

Waste management CDM projects barriers NVivo 10® qualitative dataset

Directory of Open Access Journals (Sweden)

André Luiz Bufoni

2017-12-01

Full Text Available This article contains one NVivo 10® file with the complete 432 projects design documents (PDD of seven waste management sector industries registered as Clean Development Mechanism (CDM under United Nations Framework Convention on Climate Change (UNFCCC Kyoto Protocol Initiative from 2004 to 2014. All data analyses and sample statistics made during the research remain in the file. We coded PDDs in 890 fragments of text, classified in five categories of barriers (nodes: technological, financial, human resources, regulatory, socio-political. The data supports the findings of author thesis [1] and other two indexed publication in Waste Management Journal: “The financial attractiveness assessment of large waste management projects registered as clean development mechanism” and “The declared barriers of the large developing countries waste management projects: The STAR model” [2,3]. The data allows any computer assisted qualitative content analysis (CAQCA on the sector and it is available at Mendeley [4

The economics of the CDM levy: Revenue potential, tax incidence and distortionary effects

International Nuclear Information System (INIS)

Fankhauser, Samuel; Martin, Nat

2010-01-01

A levy on the Clean Development Mechanism and other carbon trading schemes is a potential source of finance for climate change adaptation. An adaptation levy of 2% is currently imposed on all CDM transactions which could raise around $500 million between now and 2012. This paper analyses the scope for raising further adaptation finance from the CDM, the economic costs (deadweight loss) of such a measure and the incidence of the levy, that is, the economic burden the levy would impose on the buyers and sellers of credits. We find that a levy of 2% could raise up to $2 billion a year in 2020 if there are no restrictions on demand. This could rise to $10 billion for a 10% tax. Restrictions on credit demand (called supplementarity limits, the requirement that most emission abatement should happen domestically) curtail trade volumes and consequently tax revenues. They also alter the economic impact of the CDM levy. Without supplementarity restrictions sellers (developing countries) bear two-thirds of the cost of the tax. If there are supplementarity limits they can pass on the tax burden to buyers (developed countries) more or less in full. Without supplementarity restrictions the distortionary effect of the levy (its deadweight loss) rises sharply with the tax rate. With them the deadweight loss is close to zero.

Report on a survey in fiscal 1999. Survey and study on the 'measures for promoting discharge right transaction/joint implementation (JI) / clean development mechanism (CDM) project'; 1999 nendo 'haishutsuken torihiki / JI / CDM project suishin hosaku' ni kansuru chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The third conference (COP3) of the United Nations Framework Convention on Climate Change held in December 1997 in Kyoto has adopted the Kyoto mechanisms (the 'discharge right transaction', the 'joint implementation (JI)' among advanced countries, and the 'clean development mechanism (CDM)' applied to developing countries). The Kyoto mechanisms are intended to provide flexibility to the methods to achieve the greenhouse effect gas reduction targets established in the Kyoto Protocol. The Kyoto mechanisms are considered to be implemented even during the year 2000, whose details are scheduled to be decided at COP6. Since the advanced countries have established the targets for reduction of greenhouse effect gas emission, governments and research institutes are taking various approaches. In addition, since the targets for reduction of greenhouse effect gas emission have been established, discussions are indispensable on methodology to establish the quantity of discharge and absorption of greenhouse effect gases (the so-called base line) when no project exists, as required to calculate the discharge reduction quantity as a result of implementing the project. The present survey has held study meetings attended by learned people, and compiled the results of the discussions. (NEDO)

Analysis of CDM projects’ potential benefits

Directory of Open Access Journals (Sweden)

José Affonso dos Reis Junior

2015-11-01

Full Text Available Objective – The main goal of this study is to identify and assess, within sustainability reports, information concerning potential carbon credits obtained through projects carried out under Clean Development Mechanism (CDM assumptions, as well as to assess CDM project experts’ perceptions of obstacles to entering carbon credit markets. Design/methodology/approach – exploratory, descriptive, bibliographical and documental research, and interviews. Theoretical basis - Research was based on the concepts of sustainability, especially as to environmental responsibility (CSR; cost-benefit analysis was also considered, since selling carbon credits can be a way of mitigating the trade off between immediate shareholder satisfaction and investment in CSR. Findings – The perceptions of representatives from carbon credit projects’ certifying companies was examined by means of a series of interviews – concluding that savings in costs, business marketing and certifications are even greater motivators than carbon credits themselves. We estimated that, through energy efficiency, the projects discussed in 2011 sustainability reports would be capable of saving approximately 538 million reais in costs. In addition, 40 million reais, considering the rate of the euro and of securities on December 31, 2014, would be gained through the sale of carbon credits. Practical implications – Thus, this research helps to demonstrate the significant potential for further financial gains that companies may obtain through energy efficiency and habitat restructuring, whether by taking advantage of CO2 reduction brought about by such projects, or by developing new projects that continue to benefit economy, society and the environment.

Potential of wind power projects under the Clean Development Mechanism in India

Directory of Open Access Journals (Sweden)

Michaelowa Axel

2007-07-01

Full Text Available Abstract Background So far, the cumulative installed capacity of wind power projects in India is far below their gross potential (≤ 15% despite very high level of policy support, tax benefits, long term financing schemes etc., for more than 10 years etc. One of the major barriers is the high costs of investments in these systems. The Clean Development Mechanism (CDM of the Kyoto Protocol provides industrialized countries with an incentive to invest in emission reduction projects in developing countries to achieve a reduction in CO2 emissions at lowest cost that also promotes sustainable development in the host country. Wind power projects could be of interest under the CDM because they directly displace greenhouse gas emissions while contributing to sustainable rural development, if developed correctly. Results Our estimates indicate that there is a vast theoretical potential of CO2 mitigation by the use of wind energy in India. The annual potential Certified Emissions Reductions (CERs of wind power projects in India could theoretically reach 86 million. Under more realistic assumptions about diffusion of wind power projects based on past experiences with the government-run programmes, annual CER volumes by 2012 could reach 41 to 67 million and 78 to 83 million by 2020. Conclusion The projections based on the past diffusion trend indicate that in India, even with highly favorable assumptions, the dissemination of wind power projects is not likely to reach its maximum estimated potential in another 15 years. CDM could help to achieve the maximum utilization potential more rapidly as compared to the current diffusion trend if supportive policies are introduced.

The Clean Development Mechanism as a governance problem. Compensate deficits as well as Europe legal and international legal further progress of climate protection regarding to Copenhagen and Cancun; Der Clean Development Mechanism als Governance-Problem. Steuerungsdefizite sowie europarechtliche und voelkerrechtliche Weiterentwicklungen des Klimaschutzes nach Kopenhagen und Cancun

Energy Technology Data Exchange (ETDEWEB)

Ekardt, Felix; Exner, Anne-Katrin [Rostock Univ. (Germany). Forschungsgruppe Nachhaltigkeit und Klimapolitik

2011-04-15

The authors of the contribution analyze the developments in law, legal interpretation issues as well as climate political and development political effects of the Clean Development Mechanism (CDM) as an element of transnational climate change law which is associated with the states and emission trading (ETS). In the basic intention CDM shall achieve a climate-neutral reduction of costs of climate policy at the simultaneous promotion of development political goals where industrial countries may provide their global or European targets of reduction in part by means of measures in emerging or developing countries rather than by means of local climate protection. However, the specific CDM projects prove to be questionable with respect to the climate policy and development policy. This also is related to enforcement problems that represent a variant of the general environment legal problem of the latent 'interest identity of inspectors and controlled persons'. The proposed European legal and the possible international (land use related) developments of the CDM since 2013 and currently in Cancun probably will not change essentially the fundamental but intensify it even more. With all that, at the same time a kind of exemplary governance analysis arises in the context of the ETS by means of one essential part of its aspects - as well as generally in the context to the perspectives of climate policy according to Cancun.

Renewable energy projects under the clean development mechanism : myth or reality?

International Nuclear Information System (INIS)

Timilsina, G.

2005-01-01

This paper discussed the fate of Renewable Energy (RE) in Canada. The importance of RE is now increasing from both an environmental and energy security perspective, and has been projected as a key solution to climate change problems. RE is also one of the key greenhouse gas (GHG) mitigation options to be considered under the Clean Development Mechanism (CDM). Canada possesses more than 100 GW of technical potential for RE resources, including wind, solar and small hydro. Less than 10 per cent of this potential has been exploited to date. A number of programs have been developed to facilitate the deployment of Renewable Energy Technologies (RETs), including financial incentives, renewable portfolio standards and green power procurement policies. However, Canadian policies are less aggressive than those of other countries. This study showed that the supply of certified emission reductions (CERs) resulting from negative and low cost CDM options, such as energy efficiency improvements, afforestation and reforestation, could surpass the total demand for CERs during the first commitment period of the Kyoto Protocol. Implementation of RE projects under the CDM could be undermined. It was recommended that increased support of the Global Environment Facility (GEF), use of the Special Climate Change Fund, and special attention to RE from both host and investing countries should become mandatory as alternative strategies to promote RE. In addition, it should be acknowledged that the development of RETs faces a number of barriers and challenges, including competition from conventional energy technologies; lack of customer and investor confidence; regulatory and institutional barriers; and technical barriers such as transmission access. 19 refs., 1 tab

Benefits of clean development mechanism application on the life cycle assessment perspective: a case study in the palm oil industry.

Science.gov (United States)

Chuen, Onn Chiu; Yusoff, Sumiani

2012-03-01

This study performed an assessment on the beneficial of the Clean Development Mechanism (CDM) application on waste treatment system in a local palm oil industry in Malaysia. Life cycle assessment (LCA) was conducted to assess the environmental impacts of the greenhouse gas (GHG) reduction from the CDM application. Calculations on the emission reduction used the methodology based on AM002 (Avoided Wastewater and On-site Energy Use Emissions in the Industrial Sector) Version 4 published by United Nations Framework Convention on Climate Change (UNFCC). The results from the studies showed that the introduction of CDM in the palm oil mill through conversion of the captured biogas from palm oil mill effluent (POME) treatment into power generation were able to reduce approximate 0.12 tonnes CO2 equivalent concentration (tCO2e) emission and 30 kW x hr power generation per 1 tonne of fresh fruit bunch processed. Thus, the application of CDM methodology on palm oil mill wastewater treatment was able to reduce up to 1/4 of the overall environment impact generated in palm oil mill.

Suppressed Demand and the Carbon Markets: Does development have to become dirty before it qualifies to become clean?

OpenAIRE

Gavaldão, Marina; Battye, William; Grapeloup, Mathieu; François, Yann

2012-01-01

Suppressed Demand refers to a situation where Minimum Services Levels (MSL) necessary for human development are unavailable to people or only available to an inadequate level. Numerous barriers, such as low income levels or lack of infrastructure and skills prevent access to MSLs, such as potable water, cooking energy, lighting and electrification. We investigate the concept of suppressed demand as it applies to Clean Development Mechanism (CDM) and market based incentives for GHG emission re...

Impact of the Clean Development Mechanism on wind energy investments in Turkey

Energy Technology Data Exchange (ETDEWEB)

Tunc, Murat; Pak, Ruhan [Yeditepe Univ., Istanbul (Turkey). Systems Engineering Dept.

2012-12-01

As carbon trading continues to be implemented on both a national and an international scale, it is becoming an important factor in renewable energy investment decisions. Turkey, with continuous growth of carbon dioxide emission and energy consumption since 2001, ratified the Kyoto Protocol in 2009 and began registration of projects with greenhouse gas reductions in 2010. In light of these developments, wind energy resources with a potential of 48,000 MW are among the most efficient and effective solutions for clean and sustainable energy in Turkey. The aim of our study is to reveal the importance of the Clean Development Mechanism (CDM) of the Kyoto Protocol on wind energy investment decisions. A broad review of wind energy in Turkey is given, and then, a comprehensive feasibility study of a wind energy firm with a valuation model including Certified Emission Reduction (CER) prices is applied to a case study, the Mega Metallurgy Power. With a holistic and interdisciplinary system engineering approach, results are obtained using comprehensive analysis of technology, emission, and power generation of a wind energy firm linked to a valuation model. This comprehensive model sets the investment decision-making criteria, the enterprise value comparison with total financing. Finally, a sensitivity analysis is run to show that the enterprise value is positively correlated with CER prices. Based on these results, it is concluded that if the world's largest carbon offsetting program, the CDM, prevails after 2012, CER prices will have a positive impact on wind energy firm valuations and related investment decisions. (orig.)

New Arenas of Engagement at the Water Governance-Climate Finance Nexus? An Analysis of the Boom and Bust of Hydropower CDM Projects in Vietnam

NARCIS (Netherlands)

Smits, M.; Middleton, C.

2014-01-01

This article explores whether new arenas of engagement for water governance have been created and utilised following the implementation of the Clean Development Mechanism (CDM) in large hydropower projects in Vietnam. Initial optimism for climate finance – in particular amongst Northern aid

TAX TREATMENT OF CARBON CREDIT OPERATIONS IN BRAZILIAN COMPANIES WITH CDM PROJECTS

Directory of Open Access Journals (Sweden)

Vanderlei dos Santos

2012-06-01

Full Text Available The aim in this study is to identify the tax treatment applied to carbon credit operations in Brazilian companies that are developing projects in the context of the Clean Development Mechanism (CDM. Therefore, an exploratory research with a qualitative approach was developed. Data were collected with the help of questionnaire, forwarded to all Brazilian companies with CDM projects that received approval from the Inter-Ministerial Commission on Global Climate Change (CIMGC without safeguards, according to the list of the Brazilian Ministry of Science and Technology. Out of 117 companies listed, only five answered the research instrument, which represents an accessibility sample. The results show that, as for the tax treatment applied in the companies under analysis, IRPJ and CSLL should be charged on carbon credit operations. Regarding PIS, COFINS, ISS, some companies considered that these taxes are due and others that they are not. There is a consensus, though, about the fact that ICMS and IOF should not be charged. In conclusion, no uniform understanding exists as of yet about due taxes in the research sample, as no specific fiscal legislation exists yet on carbon credits in Brazil.

Soil carbon sequestration and the CDM. Opportunities and challenges for Africa

Energy Technology Data Exchange (ETDEWEB)

Ringius, Lasse

1999-12-17

The agriculture sector dominates the economies of most sub-Saharan countries, contributing about one-third of the region's GDP, accounting for forty percent of the export, and employing about two-thirds of the economically active population. Moreover, some soils in sub-Saharan Africa could, by providing sinks for carbon sequestration, play an important role in managing global climate change. Improvements in agricultural techniques and land use practices could lead to higher agricultural productivity and accumulate soil carbon. Hence, soil carbon sequestration could produce local economic income as well as social and other benefits in Africa. The Clean Development Mechanism (CDM) established in the 1997 Kyoto Protocol is designed to give developed countries with high domestic abatement cost access to low-cost greenhouse gas abatement projects in developing countries, and to benefit developing countries selling projects to investors in developed countries. It is presently unclear whether the CDM will provide credit for sink enhancement and permit broader sink activities. Unfortunately, few cost estimates of soil carbon sequestration strategies presently exist. While these costs are uncertain and all input costs have not been estimated, manure-based projects in small-holdings in Kenya could increase maize yield significantly and sequester one ton of soil carbon for a net cost of -US$806. Clearly, such projects would be very attractive economically. There is presently an urgent need to launch useful long-term (>10 years) field experiments and demonstration projects in Africa. Existing data are not readily comparable, it is uncertain how large amount of carbon could be sequestered, findings are site-specific, and it is unclear how well the sites represent wider areas. To develop CDM projects, it is important that experimental trials generate reliable and comparable data. Finally, it will be important to estimate local environmental effects and economic benefits

Potential impacts of CCS on the CDM

International Nuclear Information System (INIS)

Bakker, S; Mikunda, T.; Rivera Tinoco, R.

2011-02-01

CO2 capture and storage can ensure that stringent climate change mitigation targets are achieved more cost-effectively. However, in order to ensure a substantial role for CCS, deployment of CCS is required on a significant global scale by 2020. Currently, the CDM is the only international instrument that could provide a financial incentive for CCS in developing countries. In December 2010 it was decided that CCS could in principle be eligible under the CDM, provided a number of issues are resolved, including non-permanence, liability, monitoring and potential perverse outcomes. The latter issue relates to the concern that that CCS projects could flood the CDM market, thereby crowding out other technologies that could be considered more sustainable. This report, therefore, aims to quantify the possible impact of CCS on the CDM market, in order to assess the relevance of the CDM market objection. However, the analysis in the report is also valid for the role of CCS in other types of international support mechanisms. The first result of this study is a marginal abatement cost curve (MAC) for CCS in developing countries for 2020. Based on existing MAC studies, the IEA CCS Roadmap and an overview of ongoing and planned CCS activities, we compiled three scenarios for CCS in the power, industry and upstream sector, as shown below. The major part of the potential below $30/tCO2eq (70 - 100 MtCO2/yr) is in the natural gas processing sector. Using the MACs for the CDM market, we estimate the economic potential for CCS projects to be 4-19% of the CDM credit supply in 2020. The potential impact inclusion of CCS in the CDM may have is assessed by using several possible CER supply and demand scenarios, as well as scenarios related to market price responsiveness and the role of CDM in the post-2012 carbon market. The impact is estimated to be between $0 and $4 per tonne of CO2-eq, with three out of four scenarios indicating the lower part of this range.

When the Forest was Ours: : Ownership and Partnership in a CDM Forestry Project in Southwestern Ethiopia

OpenAIRE

Gashaw, Aynalem Getachew

2012-01-01

An Afforestation and Reforestation Clean Development Mechanism (A/R CDM) project is a forest conservation project that involves global, national and local actors. The interests and expectations of these actors are different. They have different levels of knowledge and financial as well as technological capacities influencing the project outcomes. There is a clear power asymmetry among these partners and this will have an impact on planning and implementation. The purpose of this study i...

An analysis of key issues in the clean development mechanism based on the UNEP Risoe clean development mechanism pipeline

DEFF Research Database (Denmark)

Fenhann, Jørgen Villy; Staun, Frederik

2010-01-01

is documented. The CDM pipeline includes calculation of the investment in the CDM projects. The total investment in the 2171 registered CDM projects is approximately US$60 billion. It is shown that programmatic CDM gives hope for an increased share of projects in Africa, since 16% of the programmatic CDM...

A multicriteria approach to identify investment opportunities for the exploitation of the clean development mechanism

International Nuclear Information System (INIS)

Diakoulaki, D.; Georgiou, P.; Tourkolias, C.; Georgopoulou, E.; Lalas, D.; Mirasgedis, S.; Sarafidis, Y.

2007-01-01

The aim of the present paper is to investigate the prospects for the exploitation of the Kyoto Protocol's Clean Development Mechanism (CDM) in Greece. The paper is addressing 3 questions: in which country, what kind of investment, with which economic and environmental return? The proposed approach is based on a multicriteria analysis for identifying priority countries and interesting investment opportunities in each priority country. These opportunities are then evaluated through a conventional financial analysis in order to assess their economic and environmental attractiveness. To this purpose, the IRR of a typical project in each investment category is calculated by taking into account country-specific parameters, such as baseline emission factors, load factors, costs, energy prices etc. The results reveal substantial differences in the economic and environmental return of different types of projects in different host-countries and show that for the full exploitation of the CDM a multifaceted approach to decision-making is necessary

Forest Protection and Reforestation in Costa Rica: Evaluation of a Clean Development Mechanism Prototype.

Science.gov (United States)

Subak

2000-09-01

/ Costa Rica has recently established a program that provides funds for reforestation and forest protection on private lands, partly through the sale of carbon certificates to industrialized countries. Countries purchasing these carbon offsets hope one day to receive credit against their own commitments to limit emissions of greenhouse gases. Costa Rica has used the proceeds of the sale of carbon offsets to Norway to help finance this forest incentive program, called the Private Forestry Project, which pays thousands of participants to reforest or protect forest on their lands. The Private Forestry Project is accompanied by a monitoring program conducted by Costa Rican forest engineers that seeks to determine net carbon storage accomplished on these lands each year. The Private Forestry Project, which is officially registered as an Activity Implemented Jointly, is a possible model for bundled projects funded by the Clean Development Mechanism (CDM) established by the 1997 Kyoto Protocol to the UN Framework Convention on Climate Change. It also serves as an interesting example for the CDM because it was designed by a developing country host-not by an industrialized country investor. Accordingly, it reflects the particular "sustainable development" objectives of the host country or at least the host planners. Early experience in implementing the Private Forestry Project is evaluated in light of the main objectives of the CDM and its precursor-Activities Implemented Jointly. It is concluded that the project appears to meet the criteria of global cost-effectiveness and financing from non-ODA sources. The sustainable development implications of the project are specific to the region and would not necessarily match the ideals of all investing and developing countries. The project may be seen to achieve additional greenhouse gas abatement when compared against some (although not all) baselines.

Dynamics of technology shifts in the household sector-implications for clean development mechanism

International Nuclear Information System (INIS)

Reddy, B. Sudhakara; Balachandra, P.

2006-01-01

The present paper attempts to analyse the dynamics of energy end-use technology shifts in the household sector in India. The technology shifts can be categorized as naturally occurring shifts (with increasing household incomes and availability of energy carriers) and policy-induced shifts (by creating a favourable environment). Initially, the households energy usage patterns, types of energy carriers and the technologies in use are analysed using the data from the National Sample Survey (1999-2000). The energy consumption is disaggregated according to end-use activity and by income groups for rural as well as urban households. It is observed that large variations in energy use exist across different sections of households-urban/rural, low/high-income groups, etc. Further, the paper provides a methodological framework for the diffusion of energy-efficient technologies, and the implications of such diffusions for the Clean Development Mechanism (CDM). It analyses the reasons for the gap between possible and practical implementation of energy-efficient measures, study the reasons for households not using the cost-effective technologies available to them, the benefits of innovation of energy efficiency, and the required policies and specific proposals for government intervention to achieve the potential for the CDM

Employment impacts of CDM projects in China's power sector

International Nuclear Information System (INIS)

Wang, Can; Zhang, Weishi; Cai, Wenjia; Xie, Xi

2013-01-01

There are continuous debates around the question of whether CDM really contributes to sustainable development (SD) in host countries. Employment impact is an essential indicator of SD. Based on an input-out approach this research builds a quantitative assessment model to evaluate the employment impacts of CDM. Both direct and indirect jobs creation and job losses of CDM projects in the power sector registered by the end of 2011 are calculated by project types and power grids where the project is located. Results of this study show that, although the above mentioned CDM projects causes about 99,000 net direct job losses, they also create about 3.08 million indirect jobs, resulting in the gross employment of CDM to be about 2.98 million. Thereof, hydro projects induce both direct and indirect job losses, which comes to approximately 0.89 million. Solar projects have the most potential since they own the highest indirect jobs created by one GWh generation, about 104 jobs/GWh. - Highlights: • An input–output model was built for assessment of CDM projects' employment impact; • CDM projects create direct and indirect jobs while cause some losses in short. • Significant indirect job gains of CDM projects were found; • Solar projects cause 104 jobs/GWh in average, ranking as the highest contributor

Stakeholder participation in CDM and new climate mitigation mechanisms: China CDM case study

DEFF Research Database (Denmark)

Dong, Yan; Olsen, Karen Holm

2017-01-01

exists on how LSC is practised, and synergies between climate mechanisms are largely unexplored. This study explores how international LSC rules are practised at national and local levels. It aims to better shape future LSC in climate mechanisms by learning from the case of China. First, LSC policies...... in CDM, REDD +, and GCF are identified. Relevant rules in China’s local policies are analysed. To understand the interaction between CDM policies and China’s local LSC rules, a selection of Chinese CDM Projects Design Documents (PDDs) are analysed, providing an overall impression of the stakeholder...

Modelling the impacts of CDM incentives for the Thai electricity sector

International Nuclear Information System (INIS)

Weiss, Philipp; Lefevre, Thierry; Moest, Dominik

2008-01-01

The CDM Executive Board recently took a positive decision on programmatic CDM, also known as a CDM Programme of Activities. This prompts the author to present a new tool that has been developed recently for the Thai electricity market. The Renewable Energy Development (RED) Model, initially developed in the framework of the DANIDA funded project: Promotion of Renewable Energy in Thailand (PRET), at the Ministry of Energy of Thailand, was designed for the modelling of different incentive schemes and their effects on the Thai power system for the promotion of renewable energy technologies (RETs). Within this article, an extension of the existing RED model, including the CDM as additional incentive measure, is presented (RED-CDM). Along with the project-based approach, also a sectoral and programmatic approach is included as well. Several scenarios developed with the RED-CDM model show the influence of different incentive mechanisms on the Thai power market and their potentials for reaching the policy targets stated in the Energy Strategy of Thailand for Competitiveness. The main results show that reaching the policy targets is possible, while the price can be extremely high if the targets are to be achieved on schedule. Another important result is that a sectoral CDM approach could help financing about 20% of the incentives needed for a shift towards a more sustainable power grid, if the certified emission reductions (CERs) are sold at a price of 15 Euro/ton

Team-based organization for Collider Dipole Magnet (CDM) development and production

International Nuclear Information System (INIS)

Packer, M.D.; Page, L.R.; Winters, G.C.

1991-01-01

The most influential factor in developing a magnet design and the manufacturing processing capable of mass producing Collider Dipole Magnets (CDMs) for the Superconducting Super Collider (SSC) is the work system or organization design. It is essential that design of the organization balances the demanding quality, schedule and cost aspects of the SSC program with the extraordinary technological challenges of the CDMs. The organization approach taken by the General Dynamics team is based on high employee involvement. This approach entails more widely distributed access to information, coordination and control of work, decision-making and rewards for overall performance. Implementation of this approach will apply team-based organizational concepts and proven methodologies such as concurrent engineering, work teams, skill-based pay and gainsharing. This paper focuses on the structural facets of the General Dynamics organization design to accomplish the CDM Program. Why this management approach is being taken, how it was developed and tuned for the CDM Program and how it will be incorporated in personnel staffing is described in this paper along with general operational characteristics. The issues of pay and gainsharing, while recognized as vital constituents of the overall design and effectiveness, are not discussed in this paper

A correction in the CDM methodological tool for estimating methane emissions from solid waste disposal sites.

Science.gov (United States)

Santos, M M O; van Elk, A G P; Romanel, C

2015-12-01

Solid waste disposal sites (SWDS) - especially landfills - are a significant source of methane, a greenhouse gas. Although having the potential to be captured and used as a fuel, most of the methane formed in SWDS is emitted to the atmosphere, mainly in developing countries. Methane emissions have to be estimated in national inventories. To help this task the Intergovernmental Panel on Climate Change (IPCC) has published three sets of guidelines. In addition, the Kyoto Protocol established the Clean Development Mechanism (CDM) to assist the developed countries to offset their own greenhouse gas emissions by assisting other countries to achieve sustainable development while reducing emissions. Based on methodologies provided by the IPCC regarding SWDS, the CDM Executive Board has issued a tool to be used by project developers for estimating baseline methane emissions in their project activities - on burning biogas from landfills or on preventing biomass to be landfilled and so avoiding methane emissions. Some inconsistencies in the first two IPCC guidelines have already been pointed out in an Annex of IPCC latest edition, although with hidden details. The CDM tool uses a model for methane estimation that takes on board parameters, factors and assumptions provided in the latest IPCC guidelines, while using in its core equation the one of the second IPCC edition with its shortcoming as well as allowing a misunderstanding of the time variable. Consequences of wrong ex-ante estimation of baseline emissions regarding CDM project activities can be of economical or environmental type. Example of the first type is the overestimation of 18% in an actual project on biogas from landfill in Brazil that harms its developers; of the second type, the overestimation of 35% in a project preventing municipal solid waste from being landfilled in China, which harms the environment, not for the project per se but for the undue generated carbon credits. In a simulated landfill - the same

CDM criticisms: don't throw the baby out with the bathwater

Energy Technology Data Exchange (ETDEWEB)

Buen, Joerund

2012-07-01

CDM has delivered greater offset volumes than anticipated, mainly with money from the private sector in host countries (underlying project investment) and investor countries (carbon offset purchasing) and has built considerable institutional capacity. Criticisms have focused on high transaction costs and lack of scalability; additionality challenges and lack of net mitigation impact; preventing more ambitious targets and changes in emissions paths in developed and developing countries alike; excessive rents and perverse incentives; unbalanced regional distribution; low local sustainable development benefits; corruption and lack of transparency; and lack of technology transfer. While some of these criticisms are justified, others are outdated. Transaction costs have been drastically reduced. Excessive rents and perverse incentives in the CDM will be substantially reduced post-2012. Unbalanced regional distribution will be reduced by new rules; moreover, this is probably less of a problem than commonly thought. Some criticisms are erroneously founded. There is no evidence of CDM preventing more ambitious targets in developing countries while it could prevent changes in emissions paths in developed countries. Few CDM projects have serious known problems as regards sustainable development. Corruption and fraud seem limited; and technology transfer has never been a core CDM concern. Ironically, critics often neglect the elements that need to be improved. To ensure additionality, CDM rules must be tightened to exclude common practice projects and prevent host countries from changing their policies to cater for CDM projects. CDM's scalability and additionality challenges could be substantially reduced by discounting emission reductions. There could still be some non-additional projects, but the volume of the overall portfolio of projects would be additional.(Author)

Extracting the resource rent from the CDM projects: Can the Chinese Government do better?

International Nuclear Information System (INIS)

Liu Xuemei

2010-01-01

The revenue generated from a CDM project in China will be shared by the government and the project owner, and is also subject to the corporate income tax. This paper studies the impacts of the revenue sharing policy and income tax on the CDM market. The economic model presented in this paper shows that higher-cost CDM projects will be more affected by the CDM policies than lower-cost projects. In addition, the majority of CERs will be generated from lower-cost projects. This kind of distribution of CERs across different types of CDM projects, which is in line with the current picture of the CDM market in China, is not consistent with the goal of sustainable development. A simulation shows that a type-by-type tax/fee scheme would be more effective in assisting sustainable development than the current CDM policies. The study also suggests the government use negative tax/fee with the type-by-type scheme to subsidize the CDM projects that generate large sustainability benefits but would otherwise not be developed due to high costs. If all of the revenue from the CDM is recycled, it is estimated that CERs generation will increase by 98.28 MtC, mainly from the CDM projects that have substantial sustainability benefits for the host country.

Examining the impacts of Feed-in-Tariff and the Clean Development Mechanism on Korea's renewable energy projects through comparative investment analysis

International Nuclear Information System (INIS)

Koo, Bonsang

2017-01-01

Renewable energy projects in Korea have two avenues that provide subsidies to increase their financial viability. Feed-in-Tariffs (FITs) offer cost based prices for renewable electricity to compete with conventional energy producers. The Clean Development Mechanism (CDM) issues certified emission reduction (CER) credits that generate additional revenues, enhancing renewable projects’ return on investment. This study investigated how these subsidies impact the financial returns on Korea's CDM projects. An investment analysis was performed on four cases including solar, hydropower, wind and landfill gas projects. Revenues from electricity sales, FITs and CERs were compared using financial indicators to measure their relative contributions on profitability. Results indicate that CDM is partial towards large scale projects with high emission reductions. Moreover, conflicts with FIT schemes can deter small scale, capital intensive projects from pursuing registration. The analysis highlights CDM's bias for particular project types, which is in part due to its impartiality towards carbon credit prices. It also reveals that Korea, a key benefactor of CDM, is susceptible to such biases, as demonstrated by the disproportionate distribution of issued CERs. Improving incentives for bundled, small scale projects, CER price differentiation, and excluding domestic subsidies during additionality testing are proposed as possible reforms. - Highlights: • Korea constitute 8.2% of total CERs issued, third largest in the world after China and India. • CDM favors commercially competitive projects of large scale and high emissions. • 91% of issued CERs from GWP gas; of renewables, 88% from landfill gas and wind. • CER revenues marginal for small scale, commercially less attractive projects. • Conflicts with FIT potentially deters small scale projects from registration.

Promotion of energy conservation in developing countries through the combination of ESCO and CDM: A case study of introducing distributed energy resources into Chinese urban areas

International Nuclear Information System (INIS)

Ren Hongbo; Zhou Weisheng; Gao Weijun; Wu Qiong

2011-01-01

The implementation of an energy service company (ESCO) project in developing countries may result not only in reduced energy cost but also in considerable environmental benefits, including the reduction of CO 2 emissions, which can be assessed in an economic manner under the Clean Development Mechanism (CDM) scheme. In this way, the economic and environmental benefits of energy conservation activities can be enjoyed by both the investor and the end-user, which can reduce the investment risk and realize a rational profit allocation. This study presents a numerical analysis of the introduction of distributed energy resources (DER) into a Chinese urban area. An optimization model is developed to determine the energy system combination under the constraints on the electrical and thermal balances and equipment availability. According to the simulation results, the introduction of DER systems possesses considerable potential to reduce CO 2 emissions, especially when considering that the economic profit of the CO 2 credit will increase the incentive to adopt DER systems to an even greater extent. Furthermore, by sharing the energy cost savings with the investors under an ESCO framework, the investment risk can be further reduced, and the conditions required for the project to qualify for CDM can be relaxed. Highlights: ► An investor focused analytical model is developed to aid the investment of a DER system. ► The combination of ESCO and CDM enhances the incentive to introduce energy conservation measures. ► Electricity buy-back is effective in boosting the DER system adoption under the proposed framework. ► The increased energy cost savings allocated to the investor promotes the DER system adoption. ► The rational allocation of CER credits is of vital importance to the success of the project.

Host country attractiveness for CDM non-sink projects

International Nuclear Information System (INIS)

Jung, Martina

2006-01-01

In the present study, CDM host countries are classified according to their attractiveness for CDM non-sink projects by using cluster analysis. The attractiveness of host countries for CDM non-sink projects is described by three indicators: mitigation potential, institutional CDM capacity and general investment climate. The results suggest that only a small proportion of potential host countries will attract most of the CDM investment. The CDM (non-sink) stars are China, India, Brazil, Argentina, Mexico, South Africa, Indonesia and Thailand. They are followed by attractive countries like Costa Rica, Trinidad and Tobago, Mongolia, Panama, and Chile. While most of the promising CDM host countries are located in Latin America and Asia, the general attractiveness of African host countries is relatively low (with the exception of South Africa). Policy implications of this rather inequitable geographical distribution of CDM project activities are discussed briefly

Tendances Carbone no. 75 'The CDM: let's not discard a tool that raised over US$ 200 billion'

International Nuclear Information System (INIS)

Shishlov, Igor

2012-01-01

Among the publications of CDC Climat Research, 'Tendances Carbone' bulletin specifically studies the developments of the European market for CO 2 allowances. This issue addresses the following points: Everyone wonders which miraculous instrument will enable the Green Climate Fund to mobilize the pledged US$100 billion per year in climate finance by 2020. Developing countries are now asking for interim targets to quench their mounting skepticism that this level of commitment can be reached. In the meantime paradoxically, the Clean Development Mechanism (CDM) - a tool that managed to leverage over US$200 billion of mostly private investment for climate change mitigation - is left dying without much regret

Baseline options and greenhouse gas emission reduction of clean development mechanism project in urban solid waste management

Energy Technology Data Exchange (ETDEWEB)

Hiramatsu, Ai; Hanaki, K. [Department of Urban Engineering, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Aramaki, T. [Research Center for Advanced Science and Technology, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904(Japan)

2003-07-01

The Clean Development Mechanism (CDM) was adopted in the Kyoto Protocol as a flexibility mechanism to reduce greenhouse gases (GHGs) and has been started with such projects as improving efficiency of individual technology. Although applying various countermeasures to urban areas has significant potentials for reducing GHGs, these countermeasures have not been proposed as CDM projects in the practical stage. A CDM project needs to be validated that it will reduce GHGs additionally compared with a baseline, that is, a predictive value of GHG emissions in the absence of the project. This study examined the introduction of solid waste incineration with electricity generation into three different cities, A, B and C. The main solid waste treatment and the main fuel source are landfill and coal, respectively, in City A, incineration and natural gas in City B, and landfill and hydro in City C. GHG emission reductions of each city under several baseline options assumed here were evaluated. Even if the same technology is introduced, the emission reduction greatly varies according to the current condition and the future plan of the city: 1043-1406 kg CO2/t of waste in City A, 198-580 kg CO2/t in City B, and wide range of zero to over 1000 kg CO2/t in City C. Baseline options also cause significant difference in the emission reduction even in the same city (City C). Incinerating solid waste after removing plastics by source separation in City B increased GHG emission reduction potential up to 730-900 kg CO2/t, which enhances the effectiveness as a CDM project.

Evaluating Public Plantation and Community Planted Forests under the CDM and REDD+ Mechanism for Carbon Stock in Nepal

Directory of Open Access Journals (Sweden)

Ram Asheshwar MANDAL

2013-09-01

Full Text Available Public plantations (PPs and Community planted forests (CPFs are inimitable types of participatory forest management practices in Nepal, but their eligibility issues under the framework of clean development mechanism (CDM and reducing emission from the deforestation and forest degradation mechanism (REDD+ are not evaluated. So, to explore the management system of PP and CPF, we compared forest carbon stocks in plantations and evaluated these plantations under these mechanisms as objectives of this research. The relevant documents were revised and altogether 55 samples were collected from Shreepur, Banauta and Bisbity PPs and Sita, Ramnagar and Jogikuti CPFs, in Mahottary district, Nepal. The equation of Chave et al was used to calculate the biomass, which was further converted into carbon. Meanwhile, management practices were evaluated under the framework of CDM and REDD+. The PPs are public land managed, especially by disadvantaged communities, while CPFs are the patches of national forest managed by users. The variation in carbon stock was found to be highest (148.89 ton ha-1 in Sita CPF and lowest (30.34 ton ha-1 in Bisbitty PP. In fact, it is difficult to certify plantations under CDM, due to its complexity, but they can easily be candidate to the REDD+ mechanism, if they are bundled with large forest blocks.

Manufacturing of nuclear power components in CDM

International Nuclear Information System (INIS)

Krishnan, J.; Jawale, S.B.

2002-01-01

Full text: In the nuclear research programme in India, Dr. H.J. Bhabha, the architecture of the Indian Nuclear programme felt a need for proto-type development and precision manufacturing facility to fulfill the requirements of mechanical components in establishing the manufacturing capability for the successful and self sustained nuclear programme. Centre for Design and Manufacture (CDM) hitherto known as CWS was established in 1964 to cater to the specific requirements of DAE and other associated units like ISRO, DRDO. Since then CDM has made multiple technological achievements and changes towards high quality products. The acquisition of up-to-date machines during High-Tech facility under VIII Plan project and Advance Precision Fabrication facility under IX Plan project has changed the capability of CDM towards CAD, CAM, CAE and CNC machining centres. Considering the rapid growth in the design and manufacturing, it was renamed as Centre for Design and Manufacture in March 2002, with the mission of quality output through group effort and team work

The e7 guide to implementing projects under the Clean Development Mechanism

International Nuclear Information System (INIS)

2003-09-01

The e7 was formed in 1992 to play an active role in global electricity issues and to promote sustainable development. It consists of nine leading electricity companies: American Electric Power (United States), Electricite de France (France), ENEL (Italy), Hydro-Quebec (Canada), The Kansai Electric Power Company, Inc. (Japan), Ontario Power Generation, Inc. (Canada), RWE (Germany), ScottishPower (United Kingdom), and Tokyo Electric Power Company (Japan). This report provides a guide to help develop projects under the Clean Development Mechanism (CDM), which is an instrument that allows public or private entities to invest in greenhouse gas (GHG) mitigating activities in developing countries and earn credits in an emission trading system. The dual objectives of the CDM, one of three mechanisms set out in the Kyoto Protocol, are the reduction of global GHG emissions and a contribution to sustainable development in the host country. The guidelines and procedures detailed by the United Nations Framework Convention on Climate Change (UN FCCC) and the related Protocols and Accords, were followed in the preparation of this document. Recommendations based on e7 experience were also included. The criteria for success were stated, and additionality was discussed. Additionality refers to the reductions of emissions that are additional to any that would occur in the absence of the certified project activity. The baseline methodology was described. Project Design Document (PDD) is the format that must be used for presenting the information pertaining to a project and its evaluation. PDD contents include: general description of the project activity, baseline methodology, identification of crediting period, monitoring methodology and plan, calculation of GHG emissions by sources, environmental impacts, and stakeholder comments. Third party verification, and project risk and transaction costs were also addressed. refs., tabs., figs

Leading global energy and environmental transformation: Unified ASEAN biomass-based bio-energy system incorporating the clean development mechanism

International Nuclear Information System (INIS)

Lim, Steven; Lee, Keat Teong

2011-01-01

In recent years, the ten member countries in the Association of Southeast Asia Nations (ASEAN) have experienced high economic growth and, in tandem, a substantial increment in energy usage and demand. Consequently, they are now under intense pressure to secure reliable energy supplies to keep up with their growth rate. Fossil fuels remain the primary source of energy for the ASEAN countries, due to economic and physical considerations. This situation has led to unrestrained emissions of greenhouse gases to the environment and thus effectively contributes to global climate change. The abundant supply of biomass from their tropical environmental conditions offers great potential for ASEAN countries to achieve self-reliance in energy supplies. This fact can simultaneously transform into the main driving force behind combating global climate change, which is associated with the usage of fossil fuels. This research article explores the potential and advantages for ASEAN investment in biomass-based bio-energy supply, processing and distribution network with an emphasis on regional collaborations. It also investigates the implementation and operational challenges in terms of political, economic and technical factors for the cross-border energy scheme. Reliance of ASEAN countries on the clean development mechanism (CDM) to address most of the impediments in developing the project is also under scrutiny. Unified co-operation among ASEAN countries in integrating biomass-based bio-energy systems and utilising the clean development mechanism (CDM) as the common effort could serve as the prime example for regional partnerships in achieving sustainable development for the energy and environmental sector in the future. -- Highlights: →A study that explores feasibility for ASEAN investment in biomass-based bio-energy. →Focus is given on regional supply, processing and distribution network. →Cross-border implementation and operational challenges are discussed thoroughly.

Assessing Usefulness. Do Stakeholders Regard the CDM's SD Tool as Practicial?

DEFF Research Database (Denmark)

Olsen, Karen Holm; Fenhann, Jørgen Villy; Hinostroza, Miriam L.

implementation of this requirement. The independent High-Level Panel on the CDM Policy Dialogue has also considered the need for improvement. Subsequently the Conference of the Parties serving as the meetings of the Parties to the Kyoto Protocol (CMP) 7 at Durban called on the CDM Executive Board to develop...... criteria, superficial examinations and difficult stakeholder consultations. Such new approaches include scoring of indicators, priority sectors, checklists as well as improved documentation requirements for verification, municipal approval or on-site visits by DNA staff. When developing the Sustainable...... contributions, and project developers. Host countries of different size and various levels of experience with CDM and sustainability assessment and project developers with expertise for various types of projects were interviewed in a survey about their experiences. Subjects were the sustainability assessment...

Costs of certified emission reductions under the Clean Development Mechanism of the Kyoto Protocol

International Nuclear Information System (INIS)

Rahman, Shaikh M.; Kirkman, Grant A.

2015-01-01

This paper examines the cost structure of certified emission reductions (CERs) through various types of projects under the Clean Development Mechanism (CDM) of the Kyoto Protocol. Using the CDM project data, the costs of CERs and their variation across technology and over time and space are estimated by applying alternative functional forms and specifications. Results show that the average cost of CERs decreases with the project scale and duration, scale and duration effects significantly vary across project types, and there is an upward trend in costs. The results also show that the distribution of the projects in the CDM portfolio or a given location does not strictly follow the relative cost structure, nor does the distribution of the CDM projects in different host countries follow the principle of comparative advantage. More than 84% of the CDM portfolio consists of various energy projects with substantially higher costs of CERs than afforestation and reforestation, industrial and landfill gas reduction, and methane avoidance projects, which are only 12% of all projects. While per unit cost of abatement plays an important role in the bottom-up and top-down models to evaluate emission reduction potential and analyze policy alternatives, the findings contradict the presumption of such models that project investors seek out low-cost opportunities. At the aggregate level, the cost of CER by the projects in Asia and Europe is similar but higher than those hosted in Africa, Americas, and Oceania. Yet more than 83% of the projects in the CDM portfolio are located in Asia; more than 69% of the projects are in China and India alone. China appears to have a comparative advantage (i.e., lowest opportunity cost) in energy efficiency projects, while India has a comparative advantage in hydro power projects and Brazil has a comparative advantage in wind power projects. In contrast, energy efficiency category accounts for only 8% of the CDM projects in China, hydro power

Linking renewable energy CDM projects and TGC schemes: An analysis of different options

International Nuclear Information System (INIS)

Del Rio, Pablo

2006-01-01

Renewable energy CDM (RE-CDM) projects encourage cost-effective GHG mitigation and enhanced sustainable development opportunities for the host countries. CERs from CDM projects include the value of the former benefits (i.e., 'climate change benefits'), whereas the second can be given value through the issuing and trading of tradable green certificates (TGCs). Countries could agree to trade these TGCs, leading to additional revenues for the investors in renewable energy projects and, therefore, further encouraging the deployment of CDM projects, currently facing significant barriers. However, the design of a combination of CDM projects and TGC schemes raises several conflicting issues and leads to trade-offs. This paper analyses these issues, identifies the alternatives that may exist to link TGC schemes with RE-CDM projects and analyses the impacts of those options on different variables and actors

Linking renewable energy CDM projects and TGC schemes: An analysis of different options

Energy Technology Data Exchange (ETDEWEB)

Del Rio, Pablo [Department of Economics and Business, Facultad de Ciencias Juridicas y Sociales, Universidad de Castilla-La Mancha, C/ Cobertizo de S. Pedro Martir s/n., Toledo-45071 (Spain)]. E-mail: pablo.rio@uclm.es

2006-11-15

Renewable energy CDM (RE-CDM) projects encourage cost-effective GHG mitigation and enhanced sustainable development opportunities for the host countries. CERs from CDM projects include the value of the former benefits (i.e., 'climate change benefits'), whereas the second can be given value through the issuing and trading of tradable green certificates (TGCs). Countries could agree to trade these TGCs, leading to additional revenues for the investors in renewable energy projects and, therefore, further encouraging the deployment of CDM projects, currently facing significant barriers. However, the design of a combination of CDM projects and TGC schemes raises several conflicting issues and leads to trade-offs. This paper analyses these issues, identifies the alternatives that may exist to link TGC schemes with RE-CDM projects and analyses the impacts of those options on different variables and actors.

Global climate change policies. An analysis of CDM policies with an adapted GTAP model

International Nuclear Information System (INIS)

Wang, Shunli

2004-01-01

In the context of the relationships between spatial-economic interaction and global warming just discussed, this study aims to analyze the Clean Development Mechanisms (CDM) policies from an economic point of view. The research question of this study is formulated as follows: What will be the impacts of clirnate change policies, in particular CDM policies, on the economic performance of (groups of) countries in our global economic system, taking spatial interaction and general equilibrium effects into account? The purpose of addressing the issue of economic performance for (groups of) countries in the economic system is not just to identify winners and losers from international treaties. Rather, winning or losing may even determine the implementation and willingness of individual countries to participate in international environmental treaties, as illustrated by the recent withdrawal of the US from the Kyoto Protocol. By analyzing the economic impacts of an international environmental treaty for individual (groups of) countries, the framework that will be used to analyze this research question may be useful to determine the attractiveness of some global environmental policies, both for the world as a whole and for individual (groups of) countries. The research question will be answered by dividing it into six subquestions: (1) What is the position of CDM policies in the broad context of climate policy regimes?; (2) How should the relationship between human behavior and the physical environment be ideally modeled from an economic perspective? (3) How should the spatial dimension be incorporated in this framework of interaction between the economic and ecological system?; (4) How can climate change issues be incorporated in general equilibrium models in general, and in GTAP-E (extension of the Global Trade Analysis Project) in particular?; (5) How can CDM policies be implemented in the GTAP-E model?; and (6) What are the impacts of these climate change policies on

Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

Science.gov (United States)

Kittipongvises, Suthirat

2015-12-01

There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were

Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

Directory of Open Access Journals (Sweden)

Kittipongvises Suthirat

2015-12-01

Full Text Available There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2 is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR, vertical roller mills (VRM, gravity pre-concentration and microwave heating technologies that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and

Biogas from landfills embankments: the Brazilian contribution for the management of urban solid residues and the greenhouse effect mitigation through the mechanisms for clean development; Biogas de aterros: a contribuicao do Brasil na gestao de residuos solidos urbanos e na mitigacao do efeito estufa atraves dos mecanismos de desenvolvimento limpo

Energy Technology Data Exchange (ETDEWEB)

Lacerda, Gleide B.M.; Guimaraes, Hoji Y' a Henda da R.; Andrade, Euridice S. Mamede de; Teixeira, Gisele Pereira; Freitas, Marcos A.V. [Universidade Federal do Rio de Janeiro (COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Planejamento Energetico

2008-07-01

This paper studies the clean development mechanism (CDM) for sanitary sewage in Brazil, as instruments for flexibilization and mitigation of the effects of climate changes coming from the global heating. This research presents the assessments of the CDM projects for sanitary sewage in Brazil, considering the Project Conception Documents (PCD) approved until November 2007. The paper presents some methodologies for studying of energy generation potential from the biogas originated in sanitary sewage. The paper also contributes to projects of carbon credit commercialization, and relevance of the CDM instrument for the adequate management expansion of the residence solid residues as well, and advances in the implantation of sanitary embankments in Brazil.

Options for utilizing the CDM for global emission reductions

Energy Technology Data Exchange (ETDEWEB)

Butzengeiger-Geyer, Sonja; Castro, Paula; Harthan, Ralph O.; Hayashi, Daisuke; Healy, Sean; Maribu, Karl Magnus; Michaelowa, Axel; Okubo, Yuri; Schneider, Lambert; Storroe, Ingunn [Zuerich Univ. (Switzerland); Oeko-Institut e.V., Berlin (Germany); Perspectives GmbH, Hamburg (Germany); Point Carbon A/S, Oslo (Norway)

2010-11-15

The study describes and discusses in detail how four CDM reform alternatives, namely discounting of emission reductions, ambitious baselines, purchase and cancellation of CERs and reinvestment of CER levies, could be integrated in a Post-2012 climate regime. The study assesses these alternatives, according to their impacts on GHG emission reductions, contribution to sustainable development, cost-efficiency, technical feasibility, incentives and distributional effects as well as negotiability. The study shows that the introduction of discounting and ambitious baselines is technically feasible but politically a massive challenge. With the help of an economic model the study shows that the introduction of reform alternatives increases the amount of emission reductions but in comparison to the current CDM the impact is rather limited. But a CDM reform can in any case increase the credibility and improve the environmental integrity of the mechanism. (orig.)

Modernization perspectives of the Sao Paulo State sugarcane sector through the clean development mechanism and potential carbon credits generation

Energy Technology Data Exchange (ETDEWEB)

Coelho, Suani Teixeira; Lora, Beatriz Acquaro [Brazilian Reference Center on Biomass (CENBIO/USP), SP (Brazil)], Emails: suani@iee.usp.br, blora@iee.usp.br

2009-07-01

The world-wide necessity of greenhouse gases mitigation and the intergovernmental mobilization to reach the objectives established by the United Nations Framework on Climate Change (UNFCCC) has opened space for the renewable energy increase in the world's energy matrix. In Brazil, the solid sugarcane industry currently develops business in the scope of the clean development mechanism (CDM) under the Kyoto's Protocol, by means of 18 biomass-based projects, with renewable energy generation through bagasse cogeneration at 20 Sao Paulo State's sugarcane production units. The projects activity's consists of increasing the efficiency in the bagasse cogeneration facilities, qualifying the units to sell surplus electricity to the national grid, avoiding the dispatch of the same amount of energy produced by fossil-fuelled thermal plants to that grid. The reduced emissions are measured in carbon equivalent and can be converted into negotiable credits. The objective of this study was to build a 'state of art' scenario, calculating the potential emissions reduction through CDM projects for the sugarcane sector of Sao Paulo State, in which we consider the adherence of all the production units of the State to the CDM projects. The technological parameters used to elaborate the scenario were provided by the Sao Paulo State Government Bioenergy Special Commission and the baseline factor used of 0,268 tCO{sub 2}e/MWh was the adopted by the CDM projects in operation in the State. The sugarcane database for the calculations was the production ranking provided by UNICA for the 2006/2007 season. In the most conservative scenario (40 bar bagasse) 131 units could generate 607 MWm of surplus power avoiding the emission of 1.404.593 tCO{sub 2}e/year. For the 92 bar (bagasse and straw) scenario, the units could generate 3.055 MWm of surplus power avoiding 12.199.443 tCO{sub 2}e/year. (author)

Search Results | Page 73 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 721 - 730 of 1804 ... The Kyoto Protocol's Clean Development Mechanism (CDM) was established in 1997 with the dual purpose of helping developing countries achieve sustainable development (as defined nationally) and industrialized countries achieve compliance with (bind. Project ...

Expanding the development benefits from carbon offsets

Energy Technology Data Exchange (ETDEWEB)

Ayres, Jessica; Grieg-Gran, Maryanne; Harris, Lizzie; Huq, Saleemul

2006-10-15

The Clean Development Mechanism (CDM) of the Kyoto Protocol which allows for trade in emission reductions between developing and developed countries has a specific aim of ensuring that carbon emission reduction projects contribute to sustainable development of the host country according to standards set by that country. However, the development potential of transactions under the CDM is constrained by a number of factors. Governments face the dilemma of setting demanding sustainable development criteria and running the risk of losing investments to other developing countries with less demanding standards, or setting less stringent standards and thus generating little benefit at the local level. This is compounded by the fact that concluding deals under the CDM in developing countries is more expensive, time-consuming and risky than buying carbon credits elsewhere.

The Clean Development Mechanism and Dynamic Capabilities of Implementing Firms

DEFF Research Database (Denmark)

Aggarwal, Aradhna

and non-CDM firms as the control group for the pre- and post-CDM implementation periods. We control for unobserved fixed effects of firms and time periods and observed characteristics of firms and CDM projects. The analysis draws on the balance sheet data of 612 firms from India between 2001 and 2012 from...

Climate change drives wind turbines in China: case study of market based wind power development

Energy Technology Data Exchange (ETDEWEB)

Ming Yang [EET Consulting, Glen Waverley, Victoria (Australia)

2004-07-01

This paper aims at quantifying the impact of government policy and clean development mechanism (CDM) on wind power development in China. Firstly we review the background of Chinese wind power development and policy, as well as literature of climate change and CDM. We then present methodology, scenarios and data of a case study for the development of a large-scale grid-connected wind farm. We undertake project financial analysis under three scenarios. Our analysis results show that the project FIRR is 8.31% if CDM benefit is not taken into account, 8.72% if CDM benefit is considered with the price of the certified emission reduction (CER) at US dollars 4, and 10.28% if both the CDM benefit and government policy on cutting value added tax (VAT) by 50% are taken into account. This paper concludes that CDM and government preferential policy on value added tax will make wind power development financially viable in China. (author)

Policies for the design and operation of the clean development mechanism

Energy Technology Data Exchange (ETDEWEB)

Hourcade, J.Ch. [Centre International de Recherche sur l' Environnement et le Developpement (CIRED-CNRS/EHESS), 94 - Nogent sur Marne (France); Toman, M. [Resources for the Future (RFF), Washington D.C. (United States)

2003-07-01

On September 24-25 1999, CIRED and RFF held a workshop at CIRED to explore a number of key policy issues surrounding the design and operation of the Clean Development Mechanism (CDM). This mechanism, created as part of the 1997 Kyoto Protocol to the United Nations Framework Convention on Climate Change (FCCC), has been the subject of much ongoing negotiation and debate. The multinational participants assembled not to seek consensus but to promote better understanding of commonalties and differences in views in a non politicized setting, as well as to see what new ideas and understandings might emerge from the discussions. The meetings were informal and ''off the record'' to promote frank exchange. This document is a summary of the discussions as seen through the eyes of the two co-organizers. We have tried to reflect as well as possible the range and diversity of the thoughts expressed at the meeting, and we have circulated this summary to other participants for their comments. But we alone are responsible for its content. (author)

Research document no. 21 bis. How could developing countries participate in climate change prevention: the clean development mechanism and beyond

International Nuclear Information System (INIS)

Cavard, D.; Cornut, P.; Menanteau, Ph.

2000-10-01

An agreement on CDM rules is important both for industrialized and developing countries. As a flexibility mechanism, it will allow industrialized countries to benefit from low cost emission reductions but the CDM, as a main goal, should also stimulate a more sustainable economic development in DCs. The CDM is the sole instrument, with GEF, proposed for DCs participation into climate change prevention. This situation satisfies a majority of DCs, but CDM may not offer sufficient perspectives for some countries with rapid industrialization given the huge economic stakes linked to the creation of a carbon credits market between Annex I countries. The operationality of the CDM is not yet established and important questions, as environmental additionality, are still unresolved. Here we first examine the rules in order to validate project additionality and their possible consequences on the effectiveness and the scope of the mechanism. The different reactions of major DCs groups on the structure of the mechanism will then be analysed. This will lead us to examine the possibilities to enlarge participation of DCs in climate change prevention according to the apparent wish of semi-industrialized countries. (author)

Dynamic CDM strategies in an EHR environment.

Science.gov (United States)

Bieker, Michael; Bailey, Spencer

2012-02-01

A dynamic charge description master (CDM) integrates information from clinical ancillary systems into the charge-capture process, so an organization can reduce its reliance on the patient accounting system as the sole source of billing information. By leveraging the information from electronic ancillary systems, providers can eliminate the need for paper charge-capture forms and see increased accuracy and efficiency in the maintenance of billing information. Before embarking on a dynamic CDM strategy, organizations should first determine their goals for implementing an EHR system, include revenue cycle leaders on the EHR implementation team, and carefully weigh the pros and cons of CDM design decisions.

The possibility of clean development mechanism in a nuclear power expansion in Brazil

International Nuclear Information System (INIS)

Paris, Alexandre G.; Oliveira, Wagner S.

2009-01-01

The nuclear power expansion is a very controversial topic in Brazil, which needs to be carefully addressed, especially because the national energy supply system is becoming more carbon-intensive. Although most of the electricity generated in Brazil is by hydropower plants, the country's electricity matrix expansion is moving towards a larger participation of fossil fuel thermo power generation which is contrarily the global objects of climate change mitigation. Climate change is a reality and the choice facing this problem is between action and delay. There will be needed a huge international mobilization, associated with a great amount of financial, political and engineering resources interested for preventing the aggravation of the greenhouse effect. This article analyses, in the possibility of including nuclear power in the Clean Development Mechanism (CDM) criteria, the revenue that could be generated from the trading of Certified Emission Reduction (CER) in different scenarios of nuclear power expansion in Brazil. (author)

Promoting bioethanol production through clean development mechanism: Findings and lessons learnt from ASIATIC project

Energy Technology Data Exchange (ETDEWEB)

Gnansounou, Edgard; Bedniaguine, Denis; Dauriat, Arnaud

2005-12-15

Global climate change mitigation policies call for increasing use of biomass fuels as renewable substitutes to fossil energy resources. Quantified targets for biofuels introduction in to the market exist in the United States, the European Union, and a number of developing countries. In this context, mixing biologically produced ethanol with conventional gasoline represents an attractive technical option allowing for reducing emissions of greenhouse gases and lessening the dependence on non-renewable petrol in the transportation sector. This paper investigates technological and socio-economic aspects of ethanol production in developing countries, particularly in China, with special focus on determining eligibility of bioethanol projects for Clean Development Mechanism. Basing on the findings of the ASIATIC study (Agriculture and Small to Medium Scale Industries in Peri-urban Areas through Ethanol Production for Transport In China), we analyse how alcohol fuels can be produced in a sustainable way with mutual benefits between rural and urban people. The bioethanol production cost and life cycle CO2 eq. emissions were calculated for six different types of feedstock: sugarcane, sugarcane molasses, sweet sorghum juice, cassava, corn, and sorghum bagasse. Implications of the CDM rules and procedures for bioethanol industry were examined under the angles of environmental and economical additionality, and conformity with the principles of sustainable development. It is found that the starch-based (cassava) ethanol production path has the greatest potential for market penetration in China, followed by the conversion route using sugar-based feedstock (sorghum juice, sugarcane molasses). Meanwhile, the lignocelluloses biomass - to - ethanol technology may represent the highest interest for implementation as Clean Development Mechanism project. (Author)

Wind power projects in the CDM: Methodologies and tools for baselines, carbon financing and substainability analysis

DEFF Research Database (Denmark)

Ringius, L.; Grohnheit, Poul Erik; Nielsen, Lars Henrik

2002-01-01

and implications of the various methodologies and approaches in a concrete context, Africa's largest wind farm-namely the 60 MW wind farm located in Zafarana,Egypt is examined as a hypothetical CDM wind power project The report shows that for the present case example there is a difference of about 25% between......The report is intended to be a guidance document for project developers, investors, lenders, and CDM host countries involved in wind power projects in the CDM. The report explores in particular those issues that are important in CDM project assessment anddevelopment - that is, baseline development......, carbon financing, and environmental sustainability. It does not deal in detail with those issues that are routinely covered in a standard wind power project assessment. The report tests, compares, andrecommends methodologies for and approaches to baseline development. To present the application...

ESD full chip simulation: HBM and CDM requirements and simulation approach

Directory of Open Access Journals (Sweden)

E. Franell

2008-05-01

Full Text Available Verification of ESD safety on full chip level is a major challenge for IC design. Especially phenomena with their origin in the overall product setup are posing a hurdle on the way to ESD safe products. For stress according to the Charged Device Model (CDM, a stumbling stone for a simulation based analysis is the complex current distribution among a huge number of internal nodes leading to hardly predictable voltage drops inside the circuits.

This paper describes an methodology for Human Body Model (HBM simulations with an improved ESD-failure coverage and a novel methodology to replace capacitive nodes within a resistive network by current sources for CDM simulation. This enables a highly efficient DC simulation clearly marking CDM relevant design weaknesses allowing for application of this software both during product development and for product verification.

Local involvement in CDM biogas projects: Argentine experiences

NARCIS (Netherlands)

Serna Martín, A.; Dietz, T.

2008-01-01

Mitigating climate change and contributing to the sustainable development of host countries are the goals of the CDM. In order to achieve these goals, projects follow an implementation chain, which starts with the design and ends with the issuance of Certified Emission Reductions (CERs). During the

78 FR 32250 - CDM Smith and Dynamac Corp; Transfer of Data

Science.gov (United States)

2013-05-29

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPP-2013-0036; FRL-9387-5] CDM Smith and Dynamac Corp... the submitter, will be transferred to CDM Smith and its subcontractor, Dynamac Corp, in accordance with 40 CFR 2.307(h)(3) and 2.308(i)(2). CDM Smith and its subcontractor, Dynamac Corp, have been...

Design and Real Time Implementation of CDM-PI Control System in a Conical Tank Liquid Level Process

Directory of Open Access Journals (Sweden)

P. K. Bhaba

2011-10-01

Full Text Available The work focuses on the design and real time implementation of Coefficient Diagram Method (CDM based PI (CDM-PI control system for a Conical Tank Liquid Level Process (CTLLP which exhibits severe static non-linear characteristics. By taking this static non-linearity into account, a Wiener Model (WM based CDM-PI control system is developed and implemented in real time operations. The performance of this control system for set point tracking and load disturbance rejection is studied. In addition, the performance is compared with other WM based PI controllers. Real time results clearly show that WM based CDM-PI control system outperforms over the others.

CDM Convective Forecast Planning guidance

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The CDM Convective Forecast Planning (CCFP) guidance product provides a foreast of en-route aviation convective hazards. The forecasts are updated every 2 hours and...

Constraints on deviations from ΛCDM within Horndeski gravity

Energy Technology Data Exchange (ETDEWEB)

Bellini, Emilio; Cuesta, Antonio J. [ICCUB, University of Barcelona (IEEC-UB), Martí i Franquès 1, E08028 Barcelona (Spain); Jimenez, Raul; Verde, Licia, E-mail: emilio.bellini@icc.ub.edu, E-mail: ajcuesta@icc.ub.edu, E-mail: rauljimenez@g.harvard.edu, E-mail: liciaverde@icc.ub.edu [Institució Catalana de Recerca i Estudis Avançats (ICREA), 08010 Barcelona (Spain)

2016-02-01

Recent anomalies found in cosmological datasets such as the low multipoles of the Cosmic Microwave Background or the low redshift amplitude and growth of clustering measured by e.g., abundance of galaxy clusters and redshift space distortions in galaxy surveys, have motivated explorations of models beyond standard ΛCDM. Of particular interest are models where general relativity (GR) is modified on large cosmological scales. Here we consider deviations from ΛCDM+GR within the context of Horndeski gravity, which is the most general theory of gravity with second derivatives in the equations of motion. We adopt a parametrization in which the four additional Horndeski functions of time α{sub i}(t) are proportional to the cosmological density of dark energy Ω{sub DE}(t). Constraints on this extended parameter space using a suite of state-of-the art cosmological observations are presented for the first time. Although the theory is able to accommodate the low multipoles of the Cosmic Microwave Background and the low amplitude of fluctuations from redshift space distortions, we find no significant tension with ΛCDM+GR when performing a global fit to recent cosmological data and thus there is no evidence against ΛCDM+GR from an analysis of the value of the Bayesian evidence ratio of the modified gravity models with respect to ΛCDM, despite introducing extra parameters. The posterior distribution of these extra parameters that we derive return strong constraints on any possible deviations from ΛCDM+GR in the context of Horndeski gravity. We illustrate how our results can be applied to a more general frameworks of modified gravity models.

How to use the clean development mechanism in the residential sector? The case of Brazilian refrigerators

International Nuclear Information System (INIS)

Khalil, Helioui; Cohen, Claude; Salem Szklo, Alexandre

2006-01-01

The definition of simple and reliable emission baselines is crucial to foster clean development mechanism (CDM) projects. This paper assesses a project methodology that could boost large-scale energy-efficiency projects in the sector of domestic appliances. The baseline appliance is defined a priori in a 'conservative' manner as the design option minimizing life-cycle social costs. The project methodology consists in a program which rebates new appliances according to their emission savings compared to the baseline. Is the proposed baseline acceptable? What could be the impact of such project on emissions? To address these questions, we look for insights from a hypothetical case on Brazilian refrigerators. A rational choice model is developed which assumes that households select design options minimizing life-cycle private costs. Results suggest that electricity tariff distortions and financial constraints might hamper project performances and allow significant free-riding. Low income households remain trapped into low-efficiency choices and high income households adopt outperforming appliances, whether rebated or not. However, simple solutions likely to improve the project methodology do exist

Ensuring clean air: Developing a clean air strategy for British Columbia

International Nuclear Information System (INIS)

1992-04-01

In 1992, a clean air strategy will be developed to incorporate views of British Columbians on ways to meet goals related to air quality. A discussion paper is presented to provide information to those interested in participation in developing this strategy. The paper gives information on air quality issues important to the province, including local air quality, urban smog, ozone layer depletion, and global climate change. The views and concerns expressed by stakeholders who attended the Clean Air Conference in 1991 are summarized. The process used to develop the clean air strategy is outlined and some outcomes to be anticipated from the strategy are suggested, including policies and priorities for action to ensure clean air. Air pollutants of concern are total reduced sulfur, mainly from pulp mills and gas processing plants; smoke from wood burning; sulfur dioxide from pulp mills and gas plants; hydrogen fluoride from aluminum smelting; ground-level ozone in urban areas; and acid rain. Elements of a clean air strategy include a smoke management policy, management strategies for greenhouse gases and ozone smog, ozone layer protection measures, regional air quality management plans, and long-term planning efforts in energy use, transportation modes, community design, and land use. 12 refs., 14 figs., 2 tabs

Consistency of the Planck CMB data and ΛCDM cosmology

Energy Technology Data Exchange (ETDEWEB)

Shafieloo, Arman [Korea Astronomy and Space Science Institute, Daejeon, 34055 (Korea, Republic of); Hazra, Dhiraj Kumar, E-mail: shafieloo@kasi.re.kr, E-mail: dhiraj.kumar.hazra@apc.univ-paris7.fr [AstroParticule et Cosmologie (APC)/Paris Centre for Cosmological Physics, Université Paris Diderot, CNRS/IN2P3, CEA/lrfu, Observatoire de Paris, Sorbonne Paris Cité, 10, rue Alice Domon et Leonie Duquet, Paris Cedex 13, 75205 France (France)

2017-04-01

We test the consistency between Planck temperature and polarization power spectra and the concordance model of Λ Cold Dark Matter cosmology (ΛCDM) within the framework of Crossing statistics. We find that Planck TT best fit ΛCDM power spectrum is completely consistent with EE power spectrum data while EE best fit ΛCDM power spectrum is not consistent with TT data. However, this does not point to any systematic or model-data discrepancy since in the Planck EE data, uncertainties are much larger compared to the TT data. We also investigate the possibility of any deviation from ΛCDM model analyzing the Planck 2015 data. Results from TT, TE and EE data analysis indicate that no deviation is required beyond the flexibility of the concordance ΛCDM model. Our analysis thus rules out any strong evidence for beyond the concordance model in the Planck spectra data. We also report a mild amplitude difference comparing temperature and polarization data, where temperature data seems to have slightly lower amplitude than expected (consistently at all multiples), as we assume both temperature and polarization data are realizations of the same underlying cosmology.

FY 1998 annual report on the project of basic survey for improving energy consumption efficiency in developing countries and programs of international conferences including IPCC. Report on CDM workshop; Hatten tojokoku energy shohi koritsuka kiso chosa nado jigyo / IPCC nado kokusai kaigi jigyo (CDM workshop hokokusho) 1998 nendo jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

It is decided in the COP4 that the concrete schemes for the (Kyoto Mechanism) should be boiled down towards the end of 2000. Of the many outstanding issues concerned, those related to the clean development mechanism (CDM) involve a number of problems awaiting solution. In particular, setting the baselines for amounts of the greenhouse effect gas emissions in projects not existing, which are essential for identifying reduced amounts of emissions (or credits), poses serious difficulty because of wide arbitrariness involved in the methodology. Therefore, (standardization) of the procedures is demanded for the accurate identification. In actuality, however, no methodology has been established as to what methods will be possibly applicable to widely diversified types of projects. This workshop, therefore, has focused the discussions on the (baseline problems), expecting to serve as a trigger for the future directions by presenting international researches and promoting the discussions thereon to deepen recognition of these problems, where the AIJ experiences have served as one of the bases. (NEDO)

Scoping paper on new CDM baseline methodology for cross-border power trade

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

Poeyry has been sub-contracted by Carbon Limits, under the African Development Bank CDM Support Programme, to prepare a new CDM baseline methodology for cross border trade, based on a transmission line from Ethiopia to Kenya. The first step in that process is to review the response of the UNFCCC, particularly the Methodologies Panel ('Meth Panel') of the CDM Executive Board, to the various proposals on cross-border trade and interconnection of grids. This report reviews the Methodology Panel and Executive Board decisions on 4 requests for revisions of ACM2 'Consolidated baseline methodology for grid-connected electricity generation from renewable sources', and 5 proposed new baseline methodologies (NM255, NM269, NM272, NM318, NM342), all of which were rejected. We analyse the reasons the methodologies were rejected, and whether the proposed draft Approved Methodology (AM) that the Methodology Panel created in response to NM269 and NM272 is a suitable basis for a new methodology proposal.(auth)

Joint implementation, clean development mechanism and tradable permits. International regulation of greenhouse gases

DEFF Research Database (Denmark)

Nielsen, L.; Olsen, K.R.

2000-01-01

). The report describes the background for the international co-operation on reducing the greenhouse gases and the background for the instruments. How the instruments work in theory and what the practical problemsmay be. What agents' incentives are when they engage in JI or CDM, and how the initiation...... the developing countries incentives to participate in the coalition of committed countries. In the concludingchapter some recommendations on the use of JI, TP and CDM are given. The recommendations are a kind of dialog with especially the Norwegian and Swedish reports on tradable permits. Some of the issues...

WP/073 Is the Clean Development Mechanism Effective for Emission Reductions?

DEFF Research Database (Denmark)

Huang, Yongfu; He, Jingjing; Tarp, Finn

makes use of the newly-developed econometric methods for dynamic panel data models associated with X-differencing procedure. It provides evidence in support of a decline in CO2 emissions in the CDM host countries. It has important policy implications that encourage the international community to support...

The Clean Development Mechanism Re-engineered

DEFF Research Database (Denmark)

Lütken, Søren

2016-01-01

for engineering such mechanism, or indeed reengineering the CDM itself, to make it a viable mitigation financing tool, providing receipts for payments in the form of certified emission reductions (CER). Two solutions are presented, both of which secure new financing for projects that deliver real and measurable...... emissions reduction benefits on the basis of prospective revenues from emissions reduction: one introduces up-front securitization of the emissions reductions; the other builds on a defined value of the CERs without the need for a carbon price or a market for trading. Most of us use simple heuristics...... time. Simply put CERs are not project finance and do not address project capital needs when most needed — upfront. CER based returns are available only after a project is operational. That is why only one third of registered CDM projects went as far as to get their carefully calculated CERs issued...

EU-MENA energy technology transfer under the CDM: Israel as a frontrunner?

International Nuclear Information System (INIS)

Karakosta, Charikleia; Doukas, Haris; John, Psarras

2010-01-01

The majority of the Middle East and North Africa (MENA) countries possess substantial potential for the implementation of CDM projects. Abatement of Greenhouse Gas (GHG) emissions can mainly be achieved through utilizing the abundant Renewable Energy Sources (RES) in the region and the implementation of Energy Efficiency (ENEF) measures. However, most of the MENA countries have a limited track record as regards CDM projects in the pipeline comparing to the major CDM-players, like Asia-Pacific regions and Latin America. In the above framework, this paper investigates the current status of CDM in the MENA region and the related perspectives for further diffusion of the CDM though the elaboration of a Strengths-Weaknesses-Opportunities and Threats (SWOT) Analysis. Particular emphasis is laid on the case of Israel, which seems to make an exception to the rule, since it hosts most projects in the region and dominates among the MENA countries.

Why only few CDM projects?

DEFF Research Database (Denmark)

Brandt, Urs Steiner; Svendsen, Gert Tinggaard

2013-01-01

CDM projects have large potentials but also face significant obstacles that have so far limited their applicability. Two serious problems that an effective contracting faces are the presence of private information and the lack of sufficiently precise output measures. In a principal-agent framewor...

Protocolo de Quioto e as possibilidades de inserção do Brasil no Mecanismo de Desenvolvimento Limpo por meio de projetos em energia limpa The Kyoto Protocol and the possibilities for the insertion of Brazil at the Clean Development Mechanism through projects in clean energy

Directory of Open Access Journals (Sweden)

Helena Margarido Moreira

2008-04-01

Full Text Available Este artigo pretende estudar a inserção do Brasil no Mecanismo de Desenvolvimento Limpo (MDL do Protocolo de Quioto, por meio de projetos em energia limpa, enfatizando a cooperação entre países desenvolvidos e em desenvolvimento e visando as ações práticas que esse mecanismo permite desenvolver para se alcançar o desenvolvimento sustentável e para conter o aquecimento global. Para isto, realizou-se extensa revisão bibliográfica dos acordos internacionais referentes às mudanças climáticas e de livros e artigos sobre a inserção brasileira no Protocolo de Quioto e no Mecanismo de Desenvolvimento Limpo. O Protocolo de Quioto é um acordo internacional que prevê a redução das emissões de gases de efeito estufa por intermédio de mecanismos flexibilizadores. O Mecanismo de Desenvolvimento Limpo é o único que permite a participação de países em desenvolvimento, para que eles reduzam emissões por meio de projetos que busquem o desenvolvimento sustentável. Neste contexto, o Brasil surge como um país atrativo para o recebimento destes projetos, por sua vocação para desenvolver fontes alternativas de energia e pela sua liderança no processo negociador do Protocolo. O MDL configura-se, portanto, em uma grande oportunidade para o Brasil, visto que esses projetos representam uma fonte de recursos financeiros para que o país busque o desenvolvimento sustentável, além de incentivarem um maior conhecimento científico e a adoção de novas tecnologias.This article intends to study the insertion of Brazil at the Clean Development Mechanism (CDM of the Kyoto Protocol, through clean energy projects, emphasizing the cooperation between developed and developing countries, and aiming the practical actions that this mechanism allows to build up in order to reach the sustainable development and to stop the global warming. To achieve this, an intense bibliographic review of the international agreements concerning climate change, and

Clean Technology Evaluation & Workforce Development Program

Energy Technology Data Exchange (ETDEWEB)

Patricia Glaza

2012-12-01

The overall objective of the Clean Technology Evaluation portion of the award was to design a process to speed up the identification of new clean energy technologies and match organizations to testing and early adoption partners. The project was successful in identifying new technologies targeted to utilities and utility technology integrators, in developing a process to review and rank the new technologies, and in facilitating new partnerships for technology testing and adoption. The purpose of the Workforce Development portion of the award was to create an education outreach program for middle & high-school students focused on clean technology science and engineering. While originally targeting San Diego, California and Cambridge, Massachusetts, the scope of the program was expanded to include a major clean technology speaking series and expo as part of the USA Science & Engineering Festival on the National Mall in Washington, D.C.

Is a Clean Development Mechanism project economically justified? Case study of an International Carbon Sequestration Project in Iran.

Science.gov (United States)

Katircioglu, Salih; Dalir, Sara; Olya, Hossein G

2016-01-01

The present study evaluates a carbon sequestration project for the three plant species in arid and semiarid regions of Iran. Results show that Haloxylon performed appropriately in the carbon sequestration process during the 6 years of the International Carbon Sequestration Project (ICSP). In addition to a high degree of carbon dioxide sequestration, Haloxylon shows high compatibility with severe environmental conditions and low maintenance costs. Financial and economic analysis demonstrated that the ICSP was justified from an economic perspective. The financial assessment showed that net present value (NPV) (US$1,098,022.70), internal rate of return (IRR) (21.53%), and payback period (6 years) were in an acceptable range. The results of the economic analysis suggested an NPV of US$4,407,805.15 and an IRR of 50.63%. Therefore, results of this study suggest that there are sufficient incentives for investors to participate in such kind of Clean Development Mechanism (CDM) projects.

Energy, development and climate change. Considerations in Asia and Latin America

International Nuclear Information System (INIS)

2003-01-01

The main findings of two high-level regional workshops organized in 2002 - by the International Petroleum Industry Environmental Conservation Association (IPIECA) in Kuala Lumpur, Malaysia, and by the Regional Association of Oil and Natural Gas Companies in Latin America and the Caribbean (ARPEL), IPIECA and UNEP in San Jose, Costa Rica - are presented in this article. The purpose of these workshops was to increase the understanding of regional development and climate change issues, and to identify opportunities for effective near- and long-term action, particularly through the Clean Development Mechanism (CDM). Economic, methodological and institutional barriers to private sector investment in CDM projects still exist. Uncertainties about rules surrounding the CDM have progressed from hypothetical concerns to more practical ones related to institutional capacity to review and approve project applications in a timely and cost-effective manner

Contribution of the clean development mechanism to sustainable energy production. The energy sector in the West African Economic and Monetary Union - Case study: Benin, Burkina Faso, Niger and Togo

Energy Technology Data Exchange (ETDEWEB)

Satoguina, H.

2007-07-01

This study assesses the contribution of the CDM to Sustainable Development in energy sectors in the West African Economic and Monetary Union, concentrating on Benin, Burkina Faso, Niger and Togo. Through a cross-sectional survey of different stakeholder groups, the prospective sustainable development criteria for the CDM are examined and prospective small-scale CDM projects are analysed. One efficient option to reduce transaction costs to small scale CDM projects is the creation of a regional centre for capacity building and project pre-validation. This study analyses how the WAEMU could be used as a vehicle to attract CDM financing. (orig.)

A method of predicting the reliability of CDM coil insulation

International Nuclear Information System (INIS)

Kytasty, A.; Ogle, C.; Arrendale, H.

1992-01-01

This paper presents a method of predicting the reliability of the Collider Dipole Magnet (CDM) coil insulation design. The method proposes a probabilistic treatment of electrical test data, stress analysis, material properties variability and loading uncertainties to give the reliability estimate. The approach taken to predict reliability of design related failure modes of the CDM is to form analytical models of the various possible failure modes and their related mechanisms or causes, and then statistically assess the contributions of the various contributing variables. The probability of the failure mode occurring is interpreted as the number of times one would expect certain extreme situations to combine and randomly occur. One of the more complex failure modes of the CDM will be used to illustrate this methodology

A quantitative analysis of the cost-effectiveness of project types in the CDM pipeline

Energy Technology Data Exchange (ETDEWEB)

Green, Gavin A.

2008-09-15

The flexibility of the CDM is intended to reduce the cost of compliance for Annex 1 countries and contribute to cost-effective reductions. This paper provides a framework for defining cost-effective payments for CDM carbon reductions. The projects in the CDM pipeline are categorised into project types. The data provided in the Project Design Documents is quantitatively assessed to calculate the median cost and range of costs for producing a CER from the project categories. These are measured against the range of prices in the market in order to estimate the level of cost-effectiveness. Global warming potential and size of the project were shown to be key factors in the cost of producing a CER. The results show that although prices for CERs are difficult to define in the primary CER market, many of the project categories generated CERs at a cost well below the lowest market price. The difference in these two values is defined as a loss in cost-effectiveness. The CDM is shown to be successful at developing the 'lowest hanging fruit' but the mechanism could be improved to fulfil the goal of cost-effectiveness by linking the price per CER to the cost of generating a CER. (au)

The H II galaxy Hubble diagram strongly favours Rh = ct over ΛCDM

Science.gov (United States)

Wei, Jun-Jie; Wu, Xue-Feng; Melia, Fulvio

2016-12-01

We continue to build support for the proposal to use H II galaxies (HIIGx) and giant extragalactic H II regions (GEHR) as standard candles to construct the Hubble diagram at redshifts beyond the current reach of Type Ia supernovae. Using a sample of 25 high-redshift HIIGx, 107 local HIIGx, and 24 GEHR, we confirm that the correlation between the emission-line luminosity and ionized-gas velocity dispersion is a viable luminosity indicator, and use it to test and compare the standard model ΛCDM and the Rh = ct universe by optimizing the parameters in each cosmology using a maximization of the likelihood function. For the flat ΛCDM model, the best fit is obtained with Ω _m= 0.40_{-0.09}^{+0.09}. However, statistical tools, such as the Akaike (AIC), Kullback (KIC) and Bayes (BIC) Information Criteria favour Rh = ct over the standard model with a likelihood of ≈94.8-98.8 per cent versus only ≈1.2-5.2 per cent. For wCDM (the version of ΛCDM with a dark-energy equation of state wde ≡ pde/ρde rather than wde = wΛ = -1), a statistically acceptable fit is realized with Ω _m=0.22_{-0.14}^{+0.16} and w_de= -0.51_{-0.25}^{+0.15} which, however, are not fully consistent with their concordance values. In this case, wCDM has two more free parameters than Rh = ct, and is penalized more heavily by these criteria. We find that Rh = ct is strongly favoured over wCDM with a likelihood of ≈92.9-99.6 per cent versus only 0.4-7.1 per cent. The current HIIGx sample is already large enough for the BIC to rule out ΛCDM/wCDM in favour of Rh = ct at a confidence level approaching 3σ.

Analysis of CDM experience in Morocco and lessons learnt for West African Economic and Monetary Union. Case study: Benin, Burkina Faso, Niger and Togo

OpenAIRE

Satoguina, Honorat

2006-01-01

This study assesses the CDM potential in Benin, Burkina Faso, Niger and Togo. Morocco has been used as an example, as it is quite advanced in developing an impressive CDM project portfolio. The study focuses not only on the absolute greenhouse gas abatement potential of these countries, but also assesses the comparative CDM endowment on the basis of an holistic analysis of each country, thereby highlighting the relative position of Benin, Burkina Faso, Niger and Togo in the global CDM market....

The Clean Development Mechanism and Sustainable Development in China's Electricity Sector

Institute of Scientific and Technical Information of China (English)

Paul A. Steenhof

2005-01-01

The Clean Development Mechanism,a flexibility mechanism contained in the Kyoto Protocol, offers China an important tool to attract investment in clean energy technology and processes into its electricity sector. The Chinese electricity sector places centrally in the country's economy and environment, being a significant contributor to the acid rain and air pollution problems that plague many of China's cities and regions, and therefore a focus of many related energy and environmental policies.China's electricity sector has also been the subject of a number of economic analyses that have showed that it contains the highest potential for clean energy investment through the Clean Development Mechanism of any economic sector in China. This mechanism, through the active participation from investors in more industrialized countries, can help alleviate the environmental problems attributable to electricity generation in China through advancing such technology as wind electricity generation, dean coal technology, high efficient natural gas electricity generation, or utilization of coal mine methane. In this context, the Clean Development Mechanism also compliments a range of environmental and energy policies which are strategizing to encourage the sustainable development of China's economy.

Climate change in Latin America and the Caribbean. A review of the Bonn and Marrakech decisions and their effect on the clean development mechanism of the Kyoto protocol

International Nuclear Information System (INIS)

Maggiora, C. della

2002-04-01

The objective of this document is to present an overview of recent climate change developments, in particular with regards to carbon markets under the Clean Development Mechanism (CDM). The document is divided into three sections. The first section describes the history of the climate change negotiations. Section two presents an overview of the recent decisions adopted at the last international meetings (Bonn Agreements and Marrakech Accord), which have improved the odds of ratification of the Kyoto Protocol by 2002. The third section analyzes the carbon credit market. The first part of this section briefly presents the available information regarding real carbon credit transactions, while the second section focuses on the literature review of several theoretical models and presents the theoretical estimates of the price and size of the carbon market

The role of the clean development mechanism in facilitating the application of biomass renewable energy technologies in Malaysia

International Nuclear Information System (INIS)

Kheng, Wong Hwee; Hvid, Joergen

2003-01-01

The Malaysian Government's move to ratify the Kyoto Protocol in September 2001 reaffirms the country's support to combat global climate change. Although Malaysia is not bound by any commitments to reduce its greenhouse gas emissions, the opportunities that exist through the Clean Development Mechanism (CDM) could be two-fold: to contribute to the country's sustainable development objectives and to improve the energy supply security through the application of clean energy technologies such as renewable energy technologies. Malaysia is very dependent on fossil fuel based technologies for electricity generation and energy production. In 2001 almost 90% of the total energy input to power stations was derived from fossil fuels. Although the energy mix will continue to be predominantly based on fossil fuels, indigenous renewable energy resources may come to play a noticeable role in complementing the depleting fossil fuels. This paper focuses on how best to utilize the oil palm residues for electricity generation and energy production as these residues are the 'low hanging fruits' that are readily available. It compares the use of two different technological uses of residues: distributes power generation and co-firing with coal in large-scale power plants. The paper analyses the financial, economic and environmental impacts of these technologies, and it discusses the relative benefits of the technologies. In addition, the paper look into the barriers associated with each of the technologies, and it suggests possible policy interventions to be adopted in order to promote a viable and environmentally efficient use of the limited biomass resources. (au)

Comparison of Cluster Lensing Profiles with Lambda CDM Predictions

Energy Technology Data Exchange (ETDEWEB)

Broadhurst, Tom; /Tel Aviv U.; Umetsu, Keiichi; /Taipei, Inst. Astron. Astrophys.; Medezinski, Elinor; /Tel Aviv U.; Oguri, Masamune; /KIPAC, Menlo Park; Rephaeli, Yoel; /Tel Aviv U. /San Diego, CASS

2008-05-21

We derive lens distortion and magnification profiles of four well known clusters observed with Subaru. Each cluster is very well fitted by the general form predicted for Cold Dark Matter (CDM) dominated halos, with good consistency found between the independent distortion and magnification measurements. The inferred level of mass concentration is surprisingly high, 8 < c{sub vir} < 15 ( = 10.39 {+-} 0.91), compared to the relatively shallow profiles predicted by the {Lambda}CDM model, c{sub vir} = 5.06 {+-} 1.10 (for = 1.25 x 10{sup 15} M{sub {circle_dot}}/h). This represents a 4{sigma} discrepancy, and includes the relatively modest effects of projection bias and profile evolution derived from N-body simulations, which oppose each other with little residual effect. In the context of CDM based cosmologies, this discrepancy implies some modification of the widely assumed spectrum of initial density perturbations, so clusters collapse earlier (z {ge} 1) than predicted (z < 0.5) when the Universe was correspondingly denser.

CLUMP-3D: Testing ΛCDM with Galaxy Cluster Shapes

Science.gov (United States)

Sereno, Mauro; Umetsu, Keiichi; Ettori, Stefano; Sayers, Jack; Chiu, I.-Non; Meneghetti, Massimo; Vega-Ferrero, Jesús; Zitrin, Adi

2018-06-01

The ΛCDM model of structure formation makes strong predictions on the concentration and shape of dark matter (DM) halos, which are determined by mass accretion processes. Comparison between predicted shapes and observations provides a geometric test of the ΛCDM model. Accurate and precise measurements needs a full three-dimensional (3D) analysis of the cluster mass distribution. We accomplish this with a multi-probe 3D analysis of the X-ray regular Cluster Lensing and Supernova survey with Hubble (CLASH) clusters combining strong and weak lensing, X-ray photometry and spectroscopy, and the Sunyaev–Zel’dovich effect (SZe). The cluster shapes and concentrations are consistent with ΛCDM predictions. The CLASH clusters are randomly oriented, as expected given the sample selection criteria. Shapes agree with numerical results for DM-only halos, which hints at baryonic physics being less effective in making halos rounder.

Preliminary assessment of potential CDM early start projects in Brazil

Energy Technology Data Exchange (ETDEWEB)

Meyers, S.; Sathaye, J.; Lehman, B.; Schumacher, K.; van Vliet, O.; Moreira, J.R.

2000-11-01

The Brazil/US Aspen Global Forum on Climate Change Policies and Programs has facilitated a dialogue between key Brazil and US public and private sector leaders on the subject of the Clean Development Mechanism (CDM). With support from the US government, a cooperative effort between Lawrence Berkeley National Laboratory and the University of Sao Paulo conducted an assessment of a number of projects put forth by Brazilian sponsors. Initially, we gathered information and conducted a screening assessment for ten projects in the energy sector and six projects in the forestry sector. Some of the projects appeared to offer greater potential to be attractive for CDM, or had better information available. We then conducted a more detailed assessment of 12 of these projects, and two other projects that were submitted after the initial screening. An important goal was to assess the potential impact of Certified Emission Reductions (CERs) on the financial performance of projects. With the exception of the two forestry-based fuel displacement projects, the impact of CERs on the internal rate of return (IRR) is fairly small. This is true for both the projects that displace grid electricity and those that displace local (diesel-based) electricity production. The relative effect of CERs is greater for projects whose IRR without CERs is low. CERs have a substantial effect on the IRR of the two short-rotation forestry energy substitution projects. One reason is that the biofuel displaces coke and oil, both of which are carbon-intensive. Another factor is that the product of these projects (charcoal and woodfuel, respectively) is relatively low value, so the revenue from carbon credits has a strong relative impact. CERs also have a substantial effect on the NPV of the carbon sequestration projects. Financial and other barriers pose a challenge for implementation of most of the projects. In most cases, the sponsor lacks sufficient capital, and loans are available only at high interest

Carbon credit of renewable energy projects in Malaysia

Science.gov (United States)

Lim, X.; Lam, W. H.; Shamsuddin, A. H.

2013-06-01

The introduction of Clean Development Mechanism (CDM) to Malaysia improves the environment of the country. Besides achieving sustainable development, the carbon credit earned through CDM enhances the financial state of the nation. Both CDM and renewable energy contribute to the society by striving to reduce carbon emission. Most of the CDM projects are related to renewable energy, which recorded 69% out of total CDM projects. This paper presents the energy overview and status of renewable energies in the country. Then, the renewable energy will be related to the CDM.

Carbon credit of renewable energy projects in Malaysia

International Nuclear Information System (INIS)

Lim, X; Lam, W H; Shamsuddin, A H

2013-01-01

The introduction of Clean Development Mechanism (CDM) to Malaysia improves the environment of the country. Besides achieving sustainable development, the carbon credit earned through CDM enhances the financial state of the nation. Both CDM and renewable energy contribute to the society by striving to reduce carbon emission. Most of the CDM projects are related to renewable energy, which recorded 69% out of total CDM projects. This paper presents the energy overview and status of renewable energies in the country. Then, the renewable energy will be related to the CDM.

Sustainable development, clean technology and knowledge from industry

Directory of Open Access Journals (Sweden)

Sokolović Slobodan M.

2012-01-01

Full Text Available Clean technology or clean production is the most important factor for the economic growth of a society and it will play the main role not only in the area of cleaner production, but also in sustainable development. The development of clean technology will be the main factor of the company’s strategy in the future. Each company, which wants to reach the competitive position at the market and wants to be environmentally friendly, has to accept the new approach in corporate management and the strategy of new clean technology. The main principles of clean technology are based on the concept of maximum resource and energy productivity and virtually no waste. This approach may be limited by human resources and the level of their environmental knowledge. Companies are committed to the development of the workers’ skills, and thus to the improvement of the company for the full implementation of the environmental legislation and clean production concept. Based on this commitment, one of Tempus projects is designed to improve the university-enterprise cooperation in the process of creating sustainable industry in Serbia, Bosnia and Herzegovina and the Former Yugoslav Republic of Macedonia. To achieve this goal, partner universities will create special courses on sustainable industry and thus enhance the lifelong learning process and cooperation between industry and universities in the Western Balkan countries.

GDINA and CDM Packages in R

Science.gov (United States)

Rupp, André A.; van Rijn, Peter W.

2018-01-01

We review the GIDNA and CDM packages in R for fitting cognitive diagnosis/diagnostic classification models. We first provide a summary of their core capabilities and then use both simulated and real data to compare their functionalities in practice. We found that the most relevant routines in the two packages appear to be more similar than…

Development of S/G Lancing System for Upper Bundle Hydraulic Cleaning

International Nuclear Information System (INIS)

Jeong, Woo Tae; Kim, Suk Tae; Hong, Sung Yull

2005-01-01

Steam generators of nuclear power plants are recommended to be cleaned during plant outages. Various lancing equipments are developed for the cleaning of tube sheet area of nuclear steam generators. However, no lancing system has been developed in Korea for cleaning upper bundle area of steam generators. Therefore, we developed an upper bundle cleaning system for removing sludge deposited on the tube support plates of nuclear steam generators

Development of clean chemical mechanical polishing systems; Clean CMP system

Energy Technology Data Exchange (ETDEWEB)

Tsujimura, M.; Hosokawa, M. [Ebara Corp., Tokyo (Japan)

1998-10-20

Described herein are clean chemical mechanical polishing (CMP) systems developed by Ebara. A CMP system needs advanced peripheral techniques, in addition to those for grinding adopted by the conventional system, in order to fully exhibit its inherent functions. An integrated design concept is essential for the CMP steps, including slurry supplying, polishing, washing, process controlling and waste fluid treatment. The Ebara has adopted a standard concept `Clean CMP, dry-in and dry-out of wafers,` and provided world`s highest grades of techniques for inter-layer insulating film, shallow trench isolation, plug and wiring. The head for the polishing module is specially designed by FEM, to improve homogeneity of wafers from the center to edges. The dresser is also specially designed, to improve pad surface topolody after dressing. A slurry dipsersing method is developed to reduce slurry consumption. Various washing modules, designed to have the same external shape, can be allocated to various functions. 10 figs.

Clean development mechanisms in a sugar vinasse treatment plant with UASB reactors. Technical and consideration regarding the use of such mechanisms; Mecanismos de desarrollo limpio en una planta de tratamiento de vinazas de azucar con reactores UASB. Consideraciones tecnicas y economicas sobre su aplicacion

Energy Technology Data Exchange (ETDEWEB)

Obaya Abreu, M. C.; Valdes Jimenez, E.; Lorenzo Acosta, Y.; Gallardo Capote, M.; Leon Perez, O. L.; Diez Perez, K.; Morales Carmouse, M.

2005-07-01

Presently work two options of Clean Development Mechanisms (CDM) are applied, for which were carried out the researchers at pilot plant level with the purpose of eliminating all the dilution water, being the distillery wastewater to the concentrations from the COD that are produced in the distillation columns and as second option, eliminating the macro nutrients. Using the COMFAR III tool to carry out financial analyses, are compared, at opportunity level studies, the two new operation methodologies, with the realized opportunity study for the original project. (Author) 16 refs.

Defining Investment Additionality for CDM projects - practical approaches

International Nuclear Information System (INIS)

Greiner, Sandra; Michaelowa, Axel

2003-01-01

The environmental integrity of the CDM under the Kyoto Protocol depends on the possibility to avoid giving emission credits to projects that would have happened anyway. Whether and how 'Investment Additionality' of CDM projects has to be determined is currently a part of climate negotiations. We discuss the rationale of companies to invest in projects and analyse possible criteria to determine Investment Additionality from a theoretical point of view. Differences in the type of investment call for the application of different criteria. Although some criteria are better than others, no single criterion can outweigh the others in all respects. We therefore suggest a scheme for additionality testing that aims at matching types of investment and criteria in a sensible way. Criteria are evaluated on the grounds of robustness to manipulation, degree of coverage and appropriateness for testing the investment decision under consideration

The financial attractiveness assessment of large waste management projects registered as clean development mechanism

International Nuclear Information System (INIS)

Bufoni, André Luiz; Oliveira, Luciano Basto; Rosa, Luiz Pinguelli

2015-01-01

Highlights: • Projects are not financially attractive without registration as CDMs. • WM benchmarks and indicators are converging and reducing in variance. • A sensitivity analysis reveal that revenue has more of an effect on the financial results. • Results indicate that an extensive database would reduce WM project risk and capital costs. • Disclosure standards would make information more comparable worldwide. - Abstract: This study illustrates the financial analyses for demonstration and assessment of additionality presented in the project design (PDD) and enclosed documents of the 431 large Clean Development Mechanisms (CDM) classified as the ‘waste handling and disposal sector’ (13) over the past ten years (2004–2014). The expected certified emissions reductions (CER) of these projects total 63.54 million metric tons of CO 2 eq, where eight countries account for 311 projects and 43.36 million metric tons. All of the projects declare themselves ‘not financially attractive’ without CER with an estimated sum of negative results of approximately a half billion US$. The results indicate that WM benchmarks and indicators are converging and reducing in variance, and the sensitivity analysis reveals that revenues have a greater effect on the financial results. This work concludes that an extensive financial database with simple standards for disclosure would greatly diminish statement problems and make information more comparable, reducing the risk and capital costs of WM projects

The financial attractiveness assessment of large waste management projects registered as clean development mechanism

Energy Technology Data Exchange (ETDEWEB)

Bufoni, André Luiz, E-mail: bufoni@facc.ufrj.br [Energy Planning Program, Universidade Federal do Rio de Janeiro PPE/COPPE/UFRJ (Brazil); Oliveira, Luciano Basto [International Virtual Institute of Global Changes IVIG/COPPE/UFRJ (Brazil); Rosa, Luiz Pinguelli [Energy Planning Program, Universidade Federal do Rio de Janeiro PPE/COPPE/UFRJ (Brazil)

2015-09-15

Highlights: • Projects are not financially attractive without registration as CDMs. • WM benchmarks and indicators are converging and reducing in variance. • A sensitivity analysis reveal that revenue has more of an effect on the financial results. • Results indicate that an extensive database would reduce WM project risk and capital costs. • Disclosure standards would make information more comparable worldwide. - Abstract: This study illustrates the financial analyses for demonstration and assessment of additionality presented in the project design (PDD) and enclosed documents of the 431 large Clean Development Mechanisms (CDM) classified as the ‘waste handling and disposal sector’ (13) over the past ten years (2004–2014). The expected certified emissions reductions (CER) of these projects total 63.54 million metric tons of CO{sub 2}eq, where eight countries account for 311 projects and 43.36 million metric tons. All of the projects declare themselves ‘not financially attractive’ without CER with an estimated sum of negative results of approximately a half billion US$. The results indicate that WM benchmarks and indicators are converging and reducing in variance, and the sensitivity analysis reveals that revenues have a greater effect on the financial results. This work concludes that an extensive financial database with simple standards for disclosure would greatly diminish statement problems and make information more comparable, reducing the risk and capital costs of WM projects.

Developments in surface contamination and cleaning fundamentals and applied aspects

CERN Document Server

Kohli, Rajiv

2015-01-01

Developments in Surface Contamination and Cleaning, Vol. 1: Fundamentals and Applied Aspects, Second Edition, provides an excellent source of information on alternative cleaning techniques and methods for characterization of surface contamination and validation. Each volume in this series contains a particular topical focus, covering the key techniques and recent developments in the area. This volume forms the heart of the series, covering the fundamentals and application aspects, characterization of surface contaminants, and methods for removal of surface contamination. In addition, new cleaning techniques effective at smaller scales are considered and employed for removal where conventional cleaning techniques fail, along with new cleaning techniques for molecular contaminants. The Volume is edited by the leading experts in small particle surface contamination and cleaning, providing an invaluable reference for researchers and engineers in R&D, manufacturing, quality control, and procurement specific...

Where the world stands still: turnaround as a strong test of ΛCDM cosmology

Energy Technology Data Exchange (ETDEWEB)

Pavlidou, V.; Tomaras, T.N., E-mail: pavlidou@physics.uoc.gr, E-mail: tomaras@physics.uoc.gr [Department of Physics and ITCP, University of Crete, 71003 Heraklion (Greece)

2014-09-01

Our intuitive understanding of cosmic structure formation works best in scales small enough so that isolated, bound, relaxed gravitating systems are no longer adjusting their radius; and large enough so that space and matter follow the average expansion of the Universe. Yet one of the most robust predictions of ΛCDM cosmology concerns the scale that separates these limits: the turnaround radius, which is the non-expanding shell furthest away from the center of a bound structure. We show that the maximum possible value of the turnaround radius within the framework of the ΛCDM model is, for a given mass M, equal to (3GM/Λ c{sup 2}){sup 1/3}, with G Newton's constant and c the speed of light, independently of cosmic epoch, exact nature of dark matter, or baryonic effects. We discuss the possible use of this prediction as an observational test for ΛCDM cosmology. Current data appear to favor ΛCDM over alternatives with local inhomogeneities and no Λ. However there exist several local-universe structures that have, within errors, reached their limiting size. With improved determinations of their turnaround radii and the enclosed mass, these objects may challenge the limit and ΛCDM cosmology.

Where the world stands still: turnaround as a strong test of ΛCDM cosmology

Science.gov (United States)

Pavlidou, V.; Tomaras, T. N.

2014-09-01

Our intuitive understanding of cosmic structure formation works best in scales small enough so that isolated, bound, relaxed gravitating systems are no longer adjusting their radius; and large enough so that space and matter follow the average expansion of the Universe. Yet one of the most robust predictions of ΛCDM cosmology concerns the scale that separates these limits: the turnaround radius, which is the non-expanding shell furthest away from the center of a bound structure. We show that the maximum possible value of the turnaround radius within the framework of the ΛCDM model is, for a given mass M, equal to (3GM/Λ c2)1/3, with G Newton's constant and c the speed of light, independently of cosmic epoch, exact nature of dark matter, or baryonic effects. We discuss the possible use of this prediction as an observational test for ΛCDM cosmology. Current data appear to favor ΛCDM over alternatives with local inhomogeneities and no Λ. However there exist several local-universe structures that have, within errors, reached their limiting size. With improved determinations of their turnaround radii and the enclosed mass, these objects may challenge the limit and ΛCDM cosmology.

Wind power projects in the CDM: Methodologies and tools for baselines, carbon financing and sustainability analysis

International Nuclear Information System (INIS)

Ringius, L.; Grohnheit, P.E.; Nielsen, L.H.; Olivier, A.L.; Painuly, J.; Villavicencio, A.

2002-12-01

The report is intended to be a guidance document for project developers, investors, lenders, and CDM host countries involved in wind power projects in the CDM. The report explores in particular those issues that are important in CDM project assessment and development - that is, baseline development, carbon financing, and environmental sustainability. It does not deal in detail with those issues that are routinely covered in a standard wind power project assessment. The report tests, compares, and recommends methodologies for and approaches to baseline development. To present the application and implications of the various methodologies and approaches in a concrete context, Africa's largest wind farm-namely the 60 MW wind farm located in Zafarana, Egypt- is examined as a hypothetical CDM wind power project The report shows that for the present case example there is a difference of about 25% between the lowest (0.5496 tCO2/MWh) and the highest emission rate (0.6868 tCO 2 /MWh) estimated in accordance with these three standardized approaches to baseline development according to the Marrakesh Accord. This difference in emission factors comes about partly as a result of including hydroelectric power in the baseline scenario. Hydroelectric resources constitute around 21% of the generation capacity in Egypt, and, if excluding hydropower, the difference between the lowest and the highest baseline is reduced to 18%. Furthermore, since the two variations of the 'historical' baseline option examined result in the highest and the lowest baselines, by disregarding this baseline option altogether the difference between the lowest and the highest is reduced to 16%. The ES3-model, which the Systems Analysis Department at Risoe National Laboratory has developed, makes it possible for this report to explore the project-specific approach to baseline development in some detail. Based on quite disaggregated data on the Egyptian electricity system, including the wind power production

Sustainable development with clean coal

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-01

This paper discusses the opportunities available with clean coal technologies. Applications include new power plants, retrofitting and repowering of existing power plants, steelmaking, cement making, paper manufacturing, cogeneration facilities, and district heating plants. An appendix describes the clean coal technologies. These include coal preparation (physical cleaning, low-rank upgrading, bituminous coal preparation); combustion technologies (fluidized-bed combustion and NOx control); post-combustion cleaning (particulate control, sulfur dioxide control, nitrogen oxide control); and conversion with the integrated gasification combined cycle.

Long-term prospects of CDM and JI; Langfristige Perspektiven von CDM und JI

Energy Technology Data Exchange (ETDEWEB)

Cames, Martin; Anger, Niels; Boehringer, Christoph; Harthan, Ralph O.; Schneider, Lambert [Oeko-Institut, Berlin (Germany)

2007-07-15

This study analyses whether Germany should use the flexible mechanisms under the Kyoto protocol or whether it should continue to achieve its greenhouse gas reduction targets by dint of domestic policies and measures. It estimates the future potential of the project-based Kyoto mechanisms (CDM and JI) and the impacts of its use on the German and the global economy, using an integrated-assessment model. In a Delphi survey, the expectations of international experts on the future prospects of the project-based Kyoto mechanisms are assessed. The study finishes with an analysis of options for promoting the use of the flexible mechanisms in Germany and concludes that the Federal Government of Germany should establish a project-based mechanisms fund of 25 to 50 million Kyoto units to cover the compliance uncertainties due to unexpected temperature or business cycle variations. (orig.) [German] Diese Studie untersucht, ob Deutschland die flexiblen Mechanismen unter dem Kyoto-Protokoll nutzen sollte oder weiterhin seine Treibhausgasreduktionsziele durch inlaendische Politiken und Massnahmen erreichen sollte. Das kuenftige Potenzial der projektbezogenen Kyoto-Mechanismen (CDM und JI) wird untersucht und die Auswirkungen von deren Nutzung auf die deutsche und globale Wirtschaft werden mit einem Integrated-Assessment-Modell abgeschaetzt. In einer Delphi-Befragung werden die Erwartungen internationaler Experten in Hinblick auf die kuenftigen Perspektiven der projektbezogenen Kyoto- Mechanismen ermittelt. Abschliessend werden Moeglichkeiten zur Foerderung der Nutzung der flexiblen Mechanismen in Deutschland analysiert, mit der Schlussfolgerung, dass die Bundesregierung einen 25 bis 50 Millionen Kyoto-Einheiten umfassenden Fonds fuer projektbezogene Mechanismen einrichten sollte, um die Unsicherheiten bei der Erfuellung des Kyoto-Ziels infolge unerwarteter Temperaturschwankungen oder einer Aenderung der Konjunkturentwicklung abzudecken. (orig.)

Simultaneous falsification of ΛCDM and quintessence with massive, distant clusters

International Nuclear Information System (INIS)

Mortonson, Michael J.; Hu, Wayne; Huterer, Dragan

2011-01-01

Observation of even a single massive cluster, especially at high redshift, can falsify the standard cosmological framework consisting of a cosmological constant and cold dark matter (ΛCDM) with Gaussian initial conditions by exposing an inconsistency between the well-measured expansion history and the growth of structure it predicts. Through a likelihood analysis of current cosmological data that constrain the expansion history, we show that the ΛCDM upper limits on the expected number of massive, distant clusters are nearly identical to limits predicted by all quintessence models where dark energy is a minimally coupled scalar field with a canonical kinetic term. We provide convenient fitting formulas for the confidence level at which the observation of a cluster of mass M at redshift z can falsify ΛCDM and quintessence given cosmological parameter uncertainties and sample variance, as well as for the expected number of such clusters in the light cone and the Eddington bias factor that must be applied to observed masses. By our conservative confidence criteria, which equivalently require masses 3 times larger than typically expected in surveys of a few hundred square degrees, none of the presently known clusters falsify these models. Various systematic errors, including uncertainties in the form of the mass function and differences between supernova light curve fitters, typically shift the exclusion curves by less than 10% in mass, making current statistical and systematic uncertainties in cluster mass determination the most critical factor in assessing falsification of ΛCDM and quintessence.

Energy for sustainable development

International Nuclear Information System (INIS)

Toepfer, Klaus

2003-01-01

that use clean, efficient, and renewable energy technologies to meet the energy needs of under served populations, thereby reducing the environmental and health consequences of existing energy use patterns; Capacity Development for the CDM aims at both generating in participating developing countries a broad understanding of the opportunities offered by the Kyoto Mechanism Clean Development Mechanism (CDM), and developing the necessary institutional and human capabilities that allows them to formulate and implement projects under the CDM. (BA)

Energy for sustainable development

Energy Technology Data Exchange (ETDEWEB)

Toepfer, Klaus [United Nations Environment Programme (Kenya)

2003-09-01

sustainable energy enterprises that use clean, efficient, and renewable energy technologies to meet the energy needs of under served populations, thereby reducing the environmental and health consequences of existing energy use patterns; Capacity Development for the CDM aims at both generating in participating developing countries a broad understanding of the opportunities offered by the Kyoto Mechanism Clean Development Mechanism (CDM), and developing the necessary institutional and human capabilities that allows them to formulate and implement projects under the CDM. (BA)

The trend of small hydropower development in China

International Nuclear Information System (INIS)

Zhou, Sheng; Zhang, Xiliang; Liu, Jinghe

2009-01-01

The paper makes an analysis of the status quo and existing issues of small hydropower (SHP) in China and based on the logistic growth curve model forecasts the installed capacity of SHP and cost of newly built SHP in the future. It also explores the opportunity of the clean development mechanism (CDM) in SHP projects and puts forward suggestions and recommendations on enhancing the SHP market competitiveness. (author)

CDM Potential in Palm Solid Waste Cogeneration as an Alternative Energy in Aceh Province

Directory of Open Access Journals (Sweden)

Mahidin Mahidin

2013-04-01

Full Text Available Empty Fruit Bunch (EFB as a solid waste in Crude Palm Oil (CPO industry does not utilized yet as an alternative energy source to generate electricity. It is well known that use of solid wate (biomass as an energy source is part of the Clean Development Mechanism (CDM scheme due to direct reduction of Green House Gases (GHGs emission and provide a direct contribution to sustainable development. Utilization of EFB as a source of energy is very potential to be implemented in Aceh since this province has 25 CPO Mills at the moment which actively produce about 870,000 ton EFB per year. This study is subjected to evaluate the potency of electricity  from EFB theoretically by using primary data (survey data and secondary data. Potency of EFB and number of electricity produced from that EFB are estimated using primary data and direct combustion scenario, respectively. Calculation methods for emission reduction acieved are done by AMS-I.D: Renewable electricity generation to the grid and AMS-III.E: Methane emissions avoided from dumping at a solid waste disposal site. The result of this investigation shows that energy consumption in 25 CPO Mills is 45 GW(eh per year. Evidently, the number of energy/electricity which is potential to be produced by using 75% EFB is 1,047 GWh per year; so that the GHGs emission reduction up to 171,232.21 tCO2e per year.

The Most Massive Galaxies and Black Holes Allowed by ΛCDM

Science.gov (United States)

Behroozi, Peter; Silk, Joseph

2018-04-01

Given a galaxy's stellar mass, its host halo mass has a lower limit from the cosmic baryon fraction and known baryonic physics. At z > 4, galaxy stellar mass functions place lower limits on halo number densities that approach expected ΛCDM halo mass functions. High-redshift galaxy stellar mass functions can thus place interesting limits on number densities of massive haloes, which are otherwise very difficult to measure. Although halo mass functions at z function of redshift given expected halo number densities from ΛCDM. We apply similar arguments to black holes. If their virial mass estimates are accurate, number density constraints alone suggest that the quasars SDSS J1044-0125 and SDSS J010013.02+280225.8 likely have black hole mass — stellar mass ratios higher than the median z = 0 relation, confirming the expectation from Lauer bias. Finally, we present a public code to evaluate the probability of an apparently ΛCDM-inconsistent high-mass halo being detected given the combined effects of multiple surveys and observational errors.

Λ CDM is Consistent with SPARC Radial Acceleration Relation

Energy Technology Data Exchange (ETDEWEB)

Keller, B. W.; Wadsley, J. W., E-mail: kellerbw@mcmaster.ca [Department of Physics and Astronomy, McMaster University, Hamilton, ON L8S 4M1 (Canada)

2017-01-20

Recent analysis of the Spitzer Photometry and Accurate Rotation Curve (SPARC) galaxy sample found a surprisingly tight relation between the radial acceleration inferred from the rotation curves and the acceleration due to the baryonic components of the disk. It has been suggested that this relation may be evidence for new physics, beyond Λ CDM . In this Letter, we show that 32 galaxies from the MUGS2 match the SPARC acceleration relation. These cosmological simulations of star-forming, rotationally supported disks were simulated with a WMAP3 Λ CDM cosmology, and match the SPARC acceleration relation with less scatter than the observational data. These results show that this acceleration relation is a consequence of dissipative collapse of baryons, rather than being evidence for exotic dark-sector physics or new dynamical laws.

A real option-based model to valuate CDM projects under uncertain energy policies for emission trading

International Nuclear Information System (INIS)

Park, Taeil; Kim, Changyoon; Kim, Hyoungkwan

2014-01-01

Highlights: • A real option-based model for the valuation of CDM projects is proposed. • This study investigates the impact of energy policies on the value of CDM projects. • Level of target emission and its schedule should be carefully designed. • Government subsidy facilitates the implementation of CDM projects. • Period for free emission allowance prevents promoting CDM projects. - Abstract: Emission trading has been considered a primary policy tool for emission reduction. Governments establish national targets for emission reduction and assign emission reduction goals to private entities to accomplish the targets. To attain the goal, private entities should perform offset projects that can produce emission credits or buy emission credits from the market. However, it is not easy for private entities to decide to implement the projects because energy policies associated with emission trading keep changing; thus, the future benefits of the offset projects are quite uncertain. This study presents a real option-based model to investigate how uncertain energy policies affect the financial viability of an offset project. A case study showed that the establishment of a target emission was attractive to the government because it could make the CDM project financially viable with a small amount of government subsidy. In addition, the level of the government subsidy could determine the investment timing for the CDM project. In this context, governments should be cautious in designing energy policies, because even the same energy policies could have different impacts on private entities. Overall, this study is expected to assist private entities in establishing proper investment strategies for CDM projects under uncertain energy policies

Assessment of CO2 emission reduction and identification of CDM potential in a township

Energy Technology Data Exchange (ETDEWEB)

Misra, R.; Aseri, Tarun Kumar; Jamuwa, Doraj Karnal [Department of Mechanical Engineering, Government Engineering College, Ajmer, Rajasthan (India); Bansal, V. [Department of Mechanical Engineering, Government Mahila Engineering College, Ajmer, Rajasthan (India)

2012-11-15

This paper presents the theoretical investigation of CDM opportunity in a township at Jaipur, India. The purpose of study is to identify and analyze the various opportunities viz., installation of solar water heater, energy efficient lighting, energy efficient air conditioners, and energy efficient submersible water pumps in desert coolers and thus achieve a considerable (65.7 %) reduction in GHG emissions. Out of the various opportunities considered, the retrofitting with solar water heater can be recommended for CDM. Though, the retrofitting with energy efficient lighting, energy efficient air conditioners and energy efficient submersible water pumps in desert coolers claimed CO2 emission reduction of 104.84, 25.92, and 36.94 tons per annum, respectively, but the only opportunity which got through CDM was retrofitting with solar water heater claiming 115.70 tCO2 (100 %) emission reductions per annum which could result into net earnings of 115.70 CERs. The simple and discounted payback period for all four project activities are also calculated with and without CDM and tax benefits.

Exploring how the carbon market could work for the poor | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Exploring how the carbon market could work for the poor ... projects to the carbon market through the Clean Development Mechanism (CDM) might be a ... Financial barriers remain an obstacle to the full registration of this project to the CDM.

Clean Development Mechanism: Core of Kyoto Mechanism

Energy Technology Data Exchange (ETDEWEB)

Lee, Myung Kyun [United Nations Environment Programme (Denmark)

2000-06-01

Kyoto protocol is a foundation for achieving an ultimate goal of UNFCCC, which is to stabilizing greenhouse gas concentration in the air. The clean development system is a core element for successful implementation of Kyoto protocol with other Kyoto mechanisms. While UNFCCC requires a new paradigm changing to sustainable development considering demand and future environment from the past supply-oriented resource consumption, the clean development system will be used as a means of successful establishment of a new paradigm in 21st century. As environmental problem is integrated with economic problem and each country is thriving for securing its own economic benefit in the issue of environmental conservation, Korea should do its best to have both of global environmental conservation and economic benefit for its own. 1 tab.

CDM using a Cross-Country Micro Moments Database

NARCIS (Netherlands)

Bartelsman, E.J.; van Leeuwen, G.; Polder, M.

2017-01-01

This note starts with a retrospective view of the CDM model [Crépon, Bruno, Emmanuel Duguet, and Jacques Mairesse. 1998. “Research, Innovation and Productivity: An Econometric Analysis at the Firm Level.” Economics of Innovation and New Technology 7 (2): 115–158.] as an econometric framework for

A new recipe for Λ CDM

International Nuclear Information System (INIS)

Sahni, Varun; Sen, Anjan A.

2017-01-01

It is well known that a canonical scalar field is able to describe either dark matter or dark energy but not both. We demonstrate that a non-canonical scalar field can describe both dark matter and dark energy within a unified setting. We consider the simplest extension of the canonical Lagrangian L ∝ X"α - V(φ) where α ≥ 1 and V is a sufficiently flat potential. In this case the kinetic term in the Lagrangian behaves just like a perfect fluid, whereas the potential term mimicks dark energy. For very large values, α >> 1, the equation of state of the kinetic term drops to zero and the universe expands as if filled with a mixture of dark matter and dark energy. The velocity of sound in this model and the associated gravitational clustering are sensitive to the value of α. For very large values of α the clustering properties of our model resemble those of cold dark matter (CDM). But for smaller values of α, gravitational clustering on small scales is suppressed, and our model has properties resembling those of warm dark matter (WDM). Therefore our non-canonical model has an interesting new property: its expansion history resembles Λ CDM, while its clustering properties are akin to those of either cold or warm dark matter. (orig.)

A new recipe for Λ CDM

Energy Technology Data Exchange (ETDEWEB)

Sahni, Varun [Inter-University Centre for Astronomy and Astrophysics, Pune (India); Sen, Anjan A. [Jamia Millia Islamia, Centre for Theoretical Physics, New Delhi (India)

2017-04-15

It is well known that a canonical scalar field is able to describe either dark matter or dark energy but not both. We demonstrate that a non-canonical scalar field can describe both dark matter and dark energy within a unified setting. We consider the simplest extension of the canonical Lagrangian L ∝ X{sup α} - V(φ) where α ≥ 1 and V is a sufficiently flat potential. In this case the kinetic term in the Lagrangian behaves just like a perfect fluid, whereas the potential term mimicks dark energy. For very large values, α >> 1, the equation of state of the kinetic term drops to zero and the universe expands as if filled with a mixture of dark matter and dark energy. The velocity of sound in this model and the associated gravitational clustering are sensitive to the value of α. For very large values of α the clustering properties of our model resemble those of cold dark matter (CDM). But for smaller values of α, gravitational clustering on small scales is suppressed, and our model has properties resembling those of warm dark matter (WDM). Therefore our non-canonical model has an interesting new property: its expansion history resembles Λ CDM, while its clustering properties are akin to those of either cold or warm dark matter. (orig.)

How to falsify the GR+ΛCDM model with galaxy redshift surveys

International Nuclear Information System (INIS)

Acquaviva, Viviana; Gawiser, Eric

2010-01-01

A wide range of models describing modifications to general relativity have been proposed, but no fundamental parameter set exists to describe them. Similarly, no fundamental theory exists for dark energy to parametrize its potential deviation from a cosmological constant. This motivates a model-independent search for deviations from the concordance GR+ΛCDM cosmological model in large galaxy redshift surveys. We describe two model-independent tests of the growth of cosmological structure, in the form of quantities that must equal one if GR+ΛCDM is correct. The first, ε, was introduced previously as a scale-independent consistency check between the expansion history and structure growth. The second, υ, is introduced here as a test of scale-dependence in the linear evolution of matter density perturbations. We show that the ongoing and near-future galaxy redshift surveys WiggleZ, BOSS, and HETDEX will constrain these quantities at the 5-10% level, representing a stringent test of concordance cosmology at different redshifts. When redshift space distortions are used to probe the growth of cosmological structure, galaxies at higher redshift with lower bias are found to be most powerful in detecting the presence of deviations from the GR+ΛCDM model. However, because many dark energy or modified gravity models predict consistency with GR+ΛCDM at high redshift, it is desirable to apply this approach to surveys covering a wide range of redshifts and spatial scales.

Project Mechanisms and Technology Diffusion in Climate Policy - Kyoto project mechanisms and technology diffusion

International Nuclear Information System (INIS)

Glachant, M.; Meniere, Y.

2010-01-01

The paper deals with the diffusion of GHG mitigation technologies in developing countries. We develop a model where an abatement technology is progressively adopted by firms and we use it to compare the Clean Development Mechanism (CDM) with a standard Cap and Trade scheme (C and T). In the presence of learning spillovers, we show that the CDM yields a higher social welfare than C and T if the first adopter receives CDM credits whereas the followers do not. This result lends support to the policy proposal of relaxing the CDM additionality constraint for projects which generate significant learning externalities. (authors)

Small Scale Problems of the ΛCDM Model: A Short Review

Directory of Open Access Journals (Sweden)

Antonino Del Popolo

2017-02-01

Full Text Available The ΛCDM model, or concordance cosmology, as it is often called, is a paradigm at its maturity. It is clearly able to describe the universe at large scale, even if some issues remain open, such as the cosmological constant problem, the small-scale problems in galaxy formation, or the unexplained anomalies in the CMB. ΛCDM clearly shows difficulty at small scales, which could be related to our scant understanding, from the nature of dark matter to that of gravity; or to the role of baryon physics, which is not well understood and implemented in simulation codes or in semi-analytic models. At this stage, it is of fundamental importance to understand whether the problems encountered by the ΛDCM model are a sign of its limits or a sign of our failures in getting the finer details right. In the present paper, we will review the small-scale problems of the ΛCDM model, and we will discuss the proposed solutions and to what extent they are able to give us a theory accurately describing the phenomena in the complete range of scale of the observed universe.

CDM: Teaching Discrete Mathematics to Computer Science Majors

Science.gov (United States)

Sutner, Klaus

2005-01-01

CDM, for computational discrete mathematics, is a course that attempts to teach a number of topics in discrete mathematics to computer science majors. The course abandons the classical definition-theorem-proof model, and instead relies heavily on computation as a source of motivation and also for experimentation and illustration. The emphasis on…

Stochastic backgrounds of relic gravitons, T$\\Lambda$CDM paradigm and the stiff ages

CERN Document Server

Giovannini, Massimo

2008-01-01

Absent any indirect tests on the thermal history of the Universe prior to the formation of light nuclear elements, it is legitimate to investigate situations where, before nucleosyntheis, the sound speed of the plasma was larger than $c/\\sqrt{3}$, at most equalling the speed of light $c$. In this plausible extension of the current cosmological paradigm, hereby dubbed Tensor-$\\Lambda$CDM (i.e. T$\\Lambda$CDM) scenario, high-frequency gravitons are copiously produced. Without conflicting with the bounds on the tensor to scalar ratio stemming from the combined analysis of the three standard cosmological data sets (i.e. cosmic microwave background anisotropies, large-scale structure and supenovae), the spectral energy density of the relic gravitons in the T$\\Lambda$CDM scenario can be potentially observable by wide-band interferometers (in their advanced version) operating in a frequency window which ranges between few Hz and few kHz.

CDM incidence in the economical feasibility of cogeneration in Argentine; Incidencia del MDL en la factibilidad economica de sistemas de cogeneracion industrial en Argentina

Energy Technology Data Exchange (ETDEWEB)

Sosa, Maria Isabel; Fushimi, Alberto [Universidad Nacional de La Plata (UNLP), La Plata, BA (Argentina). Fac. de Ingenieria. Area Departamental Mecanica], e-mail: misosa@volta.ing.unlp.edu.ar, e-mail: afushimi@volta.ing.unlp.edu.ar

2006-07-01

In this paper, the contribution to the financial and economic feasibility of cogeneration systems with gas turbine and exhaust gas heat recovery boiler is discussed in function of the financial credit for reduction of greenhouse gases emissions (GH Gs) by using the Clean Development Mechanism (CDM). It has to be kept in mind the restrictions of these systems to be capital intensive projects subject to the effects of the economy of scale. Other factors to take into account are the constancy of the heat demand, the rates of sale of electricity and steam surpluses, the regulatory laws, the ignorance of the cogeneration technologies on the part of the investor, among others. The profitability of the investment for implementation of a cogeneration system can be elevated in large facilities with gas turbines and heat recovery boiler (T G + HRSG). Results discussed in previous papers are pointed out and new conclusions are enunciated. (author)

Can f(T) gravity theories mimic ΛCDM cosmic history

Energy Technology Data Exchange (ETDEWEB)

Setare, M.R.; Mohammadipour, N., E-mail: rezakord@ipm.ir, E-mail: N.Mohammadipour@uok.ac.ir [Department of Science, University of Kurdistan, Sanandaj (Iran, Islamic Republic of)

2013-01-01

Recently the teleparallel Lagrangian density described by the torsion scalar T has been extended to a function of T. The f(T) modified teleparallel gravity has been proposed as the natural gravitational alternative for dark energy to explain the late time acceleration of the universe. In order to reconstruct the function f(T) by demanding a background ΛCDM cosmology we assume that, (i) the background cosmic history provided by the flat ΛCDM (the radiation ere with ω{sub eff} = (1/3), matter and de Sitter eras with ω{sub eff} = 0 and ω{sub eff} = −1, respectively) (ii) the radiation dominate in the radiation era with Ω{sub 0r} = 1 and the matter dominate during the matter phases when Ω{sub 0m} = 1. We find the cosmological dynamical system which can obey the ΛCDM cosmic history. In each era, we find a critical lines that, the radiation dominated and the matter dominated are one points of them in the radiation and matter phases, respectively. Also, we drive the cosmologically viability condition for these models. We investigate the stability condition with respect to the homogeneous scalar perturbations in each era and we obtain the stability conditions for the fixed points in each eras. Finally, we reconstruct the function f(T) which mimics cosmic expansion history.

Constraints on Λ(t)CDM models as holographic and agegraphic dark energy with the observational Hubble parameter data

Energy Technology Data Exchange (ETDEWEB)

Zhai, Zhong-Xu; Liu, Wen-Biao [Department of Physics, Institute of Theoretical Physics, Beijing Normal University, Beijing, 100875 (China); Zhang, Tong-Jie, E-mail: zzx@mail.bnu.edu.cn, E-mail: tjzhang@bnu.edu.cn, E-mail: wbliu@bnu.edu.cn [Department of Astronomy, Beijing Normal University, Beijing, 100875 (China)

2011-08-01

The newly released observational H(z) data (OHD) is used to constrain Λ(t)CDM models as holographic and agegraphic dark energy. By the use of the length scale and time scale as the IR cut-off including Hubble horizon (HH), future event horizon (FEH), age of the universe (AU), and conformal time (CT), we achieve four different Λ(t)CDM models which can describe the present cosmological acceleration respectively. In order to get a comparison between such Λ(t)CDM models and standard ΛCDM model, we use the information criteria (IC), Om(z) diagnostic, and statefinder diagnostic to measure the deviations. Furthermore, by simulating a larger Hubble parameter data sample in the redshift range of 0.1 < z < 2.0, we get the improved constraints and more sufficient comparison. We show that OHD is not only able to play almost the same role in constraining cosmological parameters as SNe Ia does but also provides the effective measurement of the deviation of the DE models from standard ΛCDM model. In the holographic and agegraphic scenarios, the results indicate that the FEH is more preferable than HH scenario. However, both two time scenarios show better approximations to ΛCDM model than the length scenarios.

Distinguishing CDM dwarfs from SIDM dwarfs in baryonic simulations

Science.gov (United States)

Strickland, Emily; Fitts, Alex B.; Boylan-Kolchin, Michael

2017-06-01

Dwarf galaxies in the nearby Universe are the most dark-matter-dominated systems known. They are therefore natural probes of the nature of dark matter, which remains unknown. Our collaboration has performed several high-resolution cosmological zoom-in simulations of isolated dwarf galaxies. We simulate each galaxy in standard cold dark matter (ΛCDM) as well as self-interacting dark matter (SIDM, with a cross section of σ/m ~ 1 cm2/g), both with and without baryons, in order to identify distinguishing characteristics between the two. The simulations are run using GIZMO, a meshless-finite-mass hydrodynamical code, and are part of the Feedback in Realistic Environments (FIRE) project. By analyzing both the global properties and inner structure of the dwarfs in varying dark matter prescriptions, we provide a side-by-side comparison of isolated, dark-matter-dominated galaxies at the mass scale where differences in the two models of dark matter are thought to be the most obvious. We find that the edge of classical dwarfs and ultra-faint dwarfs (at stellar masses of ~105 solar masses) provides the clearest window for distinguishing between the two theories. At these low masses, our SIDM galaxies have a cored inner density profile, while their CDM counterparts have “cuspy” centers. The SIDM versions of each galaxy also have measurably lower stellar velocity dispersions than their CDM counterparts. Future observations of ultra faint dwarfs with JWST and 30-m telescopes will be able to discern whether such alternate theories of dark matter are viable.

Sustainable Development Impacts of Nationally Appropriate Mitigation Actions: An integrated approach to assessment of co-benefits based on experience with the Clean Development Mechanism

DEFF Research Database (Denmark)

Olsen, Karen Holm

to assess the SD impacts of NAMAs. This paper argues for a new integrated approach to asses NAMAs' SD impacts that consists of SD indicators, procedures for stakeholder involvement and safeguards against negative impacts. The argument is based on a review of experience with the CDM’s contribution to SD......, particularly how a combined process and results approach known from the CDM SD Tool can be applied to develop a strong approach for SD assessment of NAMAs based on a comparison of similarities and differences between NAMAs and CDM. Five elements of a new approach towards assessment of NAMAs SD impacts...... are suggested based on emerging approaches and methodologies for monitoring, reporting and verification (MRV) of greenhouse gas reductions and SD impacts of NAMAs....

Classifying carbon credit buyers according to their attitudes towards and involvement in CDM sustainability labels

Energy Technology Data Exchange (ETDEWEB)

Parnphumeesup, Piya, E-mail: pp66@hw.ac.uk [International Centre for Island Technology (ICIT), Institute of Petroleum Engineering, Heriot-Watt University, Old Academy, Back Road, Stromness, Orkney KW16 3AW, Scotland (United Kingdom); Kerr, Sandy A. [International Centre for Island Technology (ICIT), Institute of Petroleum Engineering, Heriot-Watt University, Old Academy, Back Road, Stromness, Orkney KW16 3AW, Scotland (United Kingdom)

2011-10-15

Carbon markets are increasingly conscious of the social and environmental 'quality' of credits delivered by CDM projects. Consequently carbon credits are no longer viewed as a homogenous good and buyers now differentiate between credits supplied by different types of CDM project. The objective of this paper is to classify CER buyers according to their attitudes towards and preferences for CDM sustainability labels. K-means clustering was used to segment a sample of buyers into two clusters. The results indicate that two clear clusters exist with distinct profile patterns. Moreover, the results of discriminant analysis confirmed that the two-cluster solution was valid. Finally, the results of the chi-square analysis and a cross-tabulation showed that these two clusters were significantly different in: organization type; level of paid up capital; perception of sustainable development benefits; perception of return on investment; perception of image of the sustainability labeling; participation in the voluntary market; the project priority; knowledge in the sustainability label; attitude towards the host country's duty; and their willingness to pay. - Highlights: > The K-means clustering was used to classify CER buyers in the primary market. > The carbon market is divided into two: the premium market; and the normal market. > Governments tend to be members of the premium market. > 82% of members in the premium market are willing to pay a price premium for CERs.

Classifying carbon credit buyers according to their attitudes towards and involvement in CDM sustainability labels

International Nuclear Information System (INIS)

Parnphumeesup, Piya; Kerr, Sandy A.

2011-01-01

Carbon markets are increasingly conscious of the social and environmental 'quality' of credits delivered by CDM projects. Consequently carbon credits are no longer viewed as a homogenous good and buyers now differentiate between credits supplied by different types of CDM project. The objective of this paper is to classify CER buyers according to their attitudes towards and preferences for CDM sustainability labels. K-means clustering was used to segment a sample of buyers into two clusters. The results indicate that two clear clusters exist with distinct profile patterns. Moreover, the results of discriminant analysis confirmed that the two-cluster solution was valid. Finally, the results of the chi-square analysis and a cross-tabulation showed that these two clusters were significantly different in: organization type; level of paid up capital; perception of sustainable development benefits; perception of return on investment; perception of image of the sustainability labeling; participation in the voluntary market; the project priority; knowledge in the sustainability label; attitude towards the host country's duty; and their willingness to pay. - Highlights: → The K-means clustering was used to classify CER buyers in the primary market. → The carbon market is divided into two: the premium market; and the normal market. → Governments tend to be members of the premium market. → 82% of members in the premium market are willing to pay a price premium for CERs.

Research document no. 21 bis. How could developing countries participate in climate change prevention: the clean development mechanism and beyond; Cahier de recherche no. 21. Les pays en developpement et la prevention du risque climatique: quelles perspectives pour le mecanisme de developpement propre?

Energy Technology Data Exchange (ETDEWEB)

Cavard, D.; Cornut, P.; Menanteau, Ph

2000-10-01

An agreement on CDM rules is important both for industrialized and developing countries. As a flexibility mechanism, it will allow industrialized countries to benefit from low cost emission reductions but the CDM, as a main goal, should also stimulate a more sustainable economic development in DCs. The CDM is the sole instrument, with GEF, proposed for DCs participation into climate change prevention. This situation satisfies a majority of DCs, but CDM may not offer sufficient perspectives for some countries with rapid industrialization given the huge economic stakes linked to the creation of a carbon credits market between Annex I countries. The operationality of the CDM is not yet established and important questions, as environmental additionality, are still unresolved. Here we first examine the rules in order to validate project additionality and their possible consequences on the effectiveness and the scope of the mechanism. The different reactions of major DCs groups on the structure of the mechanism will then be analysed. This will lead us to examine the possibilities to enlarge participation of DCs in climate change prevention according to the apparent wish of semi-industrialized countries. (author)

75 FR 9181 - Secretarial China Clean Energy Business Development Mission; Application Deadline Extended

Science.gov (United States)

2010-03-01

... DEPARTMENT OF COMMERCE International Trade Administration Secretarial China Clean Energy Business... completed on-line at the Clean Energy Business Development Missions' Web site at http://www.trade.gov/Clean... (202-482-1360 or CleanEnergy[email protected] ). The application deadline has been extended to Friday...

Gravitational wave memory in ΛCDM cosmology

International Nuclear Information System (INIS)

Bieri, Lydia; Garfinkle, David; Yunes, Nicolás

2017-01-01

We examine gravitational wave memory in the case where sources and detector are in a ΛCDM cosmology. We consider the case where the Universe can be highly inhomogeneous, but gravitational radiation is treated in the short wavelength approximation. We find results very similar to those of gravitational wave memory in an asymptotically flat spacetime; however, the overall magnitude of the memory effect is enhanced by a redshift-dependent factor. In addition, we find the memory can be affected by lensing. (paper)

Low-carbon innovation and technology transfer in latecomer countries

DEFF Research Database (Denmark)

Lema, Adrian; Lema, Rasmus

2016-01-01

This paper examines the organizational arrangements for technology supply in solar photovoltaic projects in the Clean Development Mechanism (CDM). It shows that while lower middle-income countries typically import solar PV equipment into CDM projects, China, India and Thailand have begun to use new...... organizational arrangements for technology transfer which reflect the overall industry maturity in the solar PV sectors in these countries. This has great potential for long-term climate change mitigation efforts. However, the initiation of these new organizational arrangements often preceded the supply...... of technology into CDM projects. This raises important questions about the role of CDM in spearheading the development of technological capabilities required for sustainable development. The paper uses these findings to add to the literature about technology in CDM and to the wider policy debates over...

Mechanism for a clean development (MDP)

International Nuclear Information System (INIS)

2003-01-01

The mechanism of clean development (MDP) aims to favor the fight against the climatic change, by the implementing of activities, technologies and appropriate techniques emitting less greenhouse gases in south countries and by the possibility of reducing the greenhouse gases emissions for a more economical cost. This guide is a practical help for the project set-up: formalization, methodology and contract. (A.L.B.)

Clean Energy-Related Economic Development Policy across the States: Establishing a 2016 Baseline

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeffrey J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-01-01

States implement clean energy-related economic development policy to spur innovation, manufacturing, and to address other priorities. This report focuses on those policies most directly related to expanding new and existing manufacturing. The extent to which states invest in this policymaking depends on political drivers and jurisdictional economic development priorities. To date, no one source has collected all of the clean energy-related economic development policies available across the 50 states. Thus, it is unclear how many policies exist within each state and how these policies, when implemented, can drive economic development. Establishing the baseline of existing policy is a critical first step in determining the potential holistic impact of these policies on driving economic growth in a state. The goal of this report is to document the clean energy-related economic development policy landscape across the 50 states with a focus on policy that seeks to expand new or existing manufacturing within a state. States interested in promoting clean energy manufacturing in their jurisdictions may be interested in reviewing this landscape to determine how they compare to peers and to adjust their policies as necessary. This report documents over 900 existing clean energy-related economic development laws, financial incentives (technology-agnostic and clean energy focused), and other policies such as agency-directed programs and initiatives across the states.

Development and testing of the cooling coil cleaning end effector

International Nuclear Information System (INIS)

Johnson, K.I.; Mullen, O.D.; Powell, M.R.; Daly, D.S.; Engel, D.W.

1997-01-01

The Retrieval Process Development and Enhancement (KPD ampersand E) program has developed and tested an end effector to support the waste retrieval mission at the Idaho National Engineering and Environmental Laboratory (INEEL). The end effector was developed specifically to remove a sticky waste material from the cooling coils in the High Level Liquid Waste (HLLW) tank, and to vacuum up a sediment layer that has settled beneath the cooling coils. An extensive testing program was conducted in the hydraulic test bed (HTB) at the Pacific Northwest National Laboratory (PNNL) to evaluate the performance of the end effector under simulated in-tank conditions. A mock up of the cooling coils was installed in the test bed tank, and simulated waste materials were included to represent the sticky waste on the tubes and the particulate waste settled beneath them. The testing program focused on assessing long-duration mining strategies for cleaning the cooling coils and removing the particulate waste forms. The report describes the results of the end effector testing program at PNNL. Section 2 describes the physical characteristics of the HLLW tanks, including the layout of the cooling coils, and it also describes what is known of the waste forms in the tanks. Section 3 describes the cleaning and retrieval strategy that was used in developing the end effector design. Section 4 describes the cooling coil mockup in the hydraulic test bed. Section 5 discusses the rationale used in selecting the simulants for the tarry waste and particulate waste forms. Section 6 describes the tests that were performed to evaluate cleaning of the cooling coils and retrieval of the particulate simulant. Section 7 summarizes the cleaning and retrieval tests, assesses the relative importance of cleaning the cooling coils and retrieving the particulate waste, and suggests modifications that would simplify the end effector design

Assessment of GHG mitigation and CDM technology in urban transport sector of Chandigarh, India.

Science.gov (United States)

Bhargava, Nitin; Gurjar, Bhola Ram; Mor, Suman; Ravindra, Khaiwal

2018-01-01

The increase in number of vehicles in metropolitan cities has resulted in increase of greenhouse gas (GHG) emissions in urban environment. In this study, emission load of GHGs (CO, N 2 O, CO 2 ) from Chandigarh road transport sector has been estimated using Vehicular Air Pollution Inventory (VAPI) model, which uses emission factors prevalent in Indian cities. Contribution of 2-wheelers (2-w), 3-wheelers (3-w), cars, buses, and heavy commercial vehicles (HCVs) to CO, N 2 O, CO 2 , and total GHG emissions was calculated. Potential for GHG mitigation through clean development mechanism (CDM) in transport sector of Chandigarh under two scenarios, i.e., business as usual (BAU) and best estimate scenario (BES) using VAPI model, has been explored. A major contribution of GHG load (~ 50%) in Chandigarh was from four-wheelers until 2011; however, it shows a declining trend after 2011 until 2020. The estimated GHG emission from motor vehicles in Chandigarh has increased more than two times from 1065 Gg in 2005 to 2486 Gg by 2011 and is expected to increase to 4014 Gg by 2020 under BAU scenario. Under BES scenario, 30% of private transport has been transformed to public transport; GHG load was possibly reduced by 520 Gg. An increase of 173 Gg in GHGs load is projected from additional scenario (ADS) in Chandigarh city if all the diesel buses are transformed to CNG buses by 2020. Current study also offers potential for other cities to plan better GHG reduction strategies in transport sector to reduce their climate change impacts.

Sourcebook for Land Use, Land-Use Change and Forestry Projects

OpenAIRE

Pearson, Timothy; Walker, Sarah; Brown, Sandra

2013-01-01

This sourcebook is designed to be a guide for developing and implementing land use, land-use change and forestry (LULUCF) projects for the BioCarbon Fund of the World Bank that meet the requirements for the Clean Development Mechanism (CDM) of the Kyoto Protocol. Only project types and carbon pools that are eligible for credit under the CDM during the first commitment period (2008-2012) ar...

Cleaning Process Development for Metallic Additively Manufactured Parts

Science.gov (United States)

Tramel, Terri L.; Welker, Roger; Lowery, Niki; Mitchell, Mark

2014-01-01

Additive Manufacturing of metallic components for aerospace applications offers many advantages over traditional manufacturing techniques. As a new technology, many aspects of its widespread utilization remain open to investigation. Among these are the cleaning processes that can be used for post finishing of parts and measurements to verify effectiveness of the cleaning processes. Many cleaning and drying processes and measurement methods that have been used for parts manufactured using conventional techniques are candidates that may be considered for cleaning and verification of additively manufactured parts. Among these are vapor degreasing, ultrasonic immersion and spray cleaning, followed by hot air drying, vacuum baking and solvent displacement drying. Differences in porosity, density, and surface finish of additively manufactured versus conventionally manufactured parts may introduce new considerations in the selection of cleaning and drying processes or the method used to verify their effectiveness. This presentation will review the relative strengths and weaknesses of different candidate cleaning and drying processes as they may apply to additively manufactured metal parts for aerospace applications. An ultrasonic cleaning technique for exploring the cleanability of parts will be presented along with an example using additively manufactured Inconel 718 test specimens to illustrate its use. The data analysis shows that this ultrasonic cleaning approach results in a well-behaved ultrasonic cleaning/extraction behavior. That is, it does not show signs of accelerated cavitation erosion of the base material, which was later confirmed by neutron imaging. In addition, the analysis indicated that complete cleaning would be achieved by ultrasonic immersion cleaning at approximately 5 minutes, which was verified by subsequent cleaning of additional parts.

75 FR 9181 - Secretarial Indonesia Clean Energy Business Development Mission: Application Deadline Extended

Science.gov (United States)

2010-03-01

... DEPARTMENT OF COMMERCE International Trade Administration Secretarial Indonesia Clean Energy.... Applications can be completed on-line at the Clean Energy Business Development Missions' Web site at http://www.trade.gov/CleanEnergyMission or can be obtained by contacting the U.S. Department of Commerce Office of...

Conformal coupling associated with the Noether symmetry and its connection with the ΛCDM dynamics

International Nuclear Information System (INIS)

De Souza, Rudinei C; Kremer, Gilberto M

2013-01-01

The aim of this work is to investigate a non-minimally coupled scalar field model through the Noether symmetry approach, with the radiation, matter and cosmological constant eras being analyzed. The Noether symmetry condition allows a conformal coupling and by means of a change of coordinates in the configuration space the field equations can be reduced to a single equation, which is of the form of the Friedmann equation for the ΛCDM model. In this way, it is formally shown that the dynamical system can furnish solutions with the same form as those of the ΛCDM model, although the theory here considered is physically different from the former. The conserved quantity associated with the Noether symmetry can be related to the kinetic term of the scalar field and could constrain the possible deviations of the model from the ΛCDM picture. Observational constraints on the variation of the gravitational constant can be imposed on the model through the initial condition of the scalar field. (paper)

Plasma Cleaning

Science.gov (United States)

Hintze, Paul E.

2016-01-01

NASA's Kennedy Space Center has developed two solvent-free precision cleaning techniques: plasma cleaning and supercritical carbon dioxide (SCCO2), that has equal performance, cost parity, and no environmental liability, as compared to existing solvent cleaning methods.

Consistency of ΛCDM with geometric and dynamical probes

International Nuclear Information System (INIS)

Perivolaropoulos, L

2010-01-01

The ΛCDM cosmological model assumes the existence of a small cosmological constant in order to explain the observed accelerating cosmic expansion. Despite the dramatic improvement of the quality of cosmological data during the last decade it remains the simplest model that fits remarkably well (almost) all cosmological observations. In this talk I review the increasingly successful fits provided by ΛCDM on recent geometric probe data of the cosmic expansion. I also briefly discuss some emerging shortcomings of the model in attempting to fit specific classes of data (eg cosmic velocity dipole flows and cluster halo profiles). Finally, I summarize recent results on the theoretically predicted matter overdensity (δ m =(δρ m )/ρ m ) evolution (a dynamical probe of the cosmic expansion), emphasizing its scale and gauge dependence on large cosmological scales in the context of general relativity. A new scale dependent parametrization which describes accurately the growth rate of perturbations even on scales larger than 100h -1 Mpc is shown to be a straightforward generalization of the well known scale independent parametrization f(a) = Ω m (a) γ valid on smaller cosmological scales.

Development of clean soil technology using coals as oily/tarry contaminant removal

International Nuclear Information System (INIS)

Ignasiak, T.; Szymocha, K.; Carson, D.; Ignasiak, B.

1991-01-01

A Clean Soil Process for the treatment of oil/tar contaminated soils has been developed. The mechanics, of the clean-up process that utilizes coal as a cleaning medium is described. The experience and results obtained in the batch-scale testing as well as in the 250 kg/hr continuous facility have been applied for a conceptual design of a 200 t/day mobile plant

Gamma-ray bursts as cosmological probes: ΛCDM vs. conformal gravity

International Nuclear Information System (INIS)

Diaferio, Antonaldo; Ostorero, Luisa; Cardone, Vincenzo

2011-01-01

ΛCDM, for the currently preferred cosmological density Ω 0 and cosmological constant Ω Λ , predicts that the Universe expansion decelerates from early times to redshift z ≈ 0.9 and accelerates at later times. On the contrary, the cosmological model based on conformal gravity predicts that the cosmic expansion has always been accelerating. To distinguish between these two very different cosmologies, we resort to gamma-ray bursts (GRBs), which have been suggested to probe the Universe expansion history at z > 1, where identified type Ia supernovae (SNe) are rare. We use the full Bayesian approach to infer the cosmological parameters and the additional parameters required to describe the GRB data available in the literature. For the first time, we use GRBs as cosmological probes without any prior information from other data. In addition, when we combine the GRB samples with SNe, our approach neatly avoids all the inconsistencies of most numerous previous methods that are plagued by the so-called circularity problem. In fact, when analyzed properly, current data are consistent with distance moduli of GRBs and SNe that can respectively be, in a variant of conformal gravity, ∼ 15 and ∼ 3 magnitudes fainter than in ΛCDM. Our results indicate that the currently available SN and GRB samples are accommodated equally well by both ΛCDM and conformal gravity and do not exclude a continuous accelerated expansion. We conclude that GRBs are currently far from being effective cosmological probes, as they are unable to distinguish between these two very different expansion histories

Simulating cosmologies beyond ΛCDM with PINOCCHIO

Energy Technology Data Exchange (ETDEWEB)

Rizzo, Luca A. [Institut de Physique Theorique, Universite Paris-Saclay CEA, CNRS, F-91191 Gif-sur-Yvette, Cedex (France); Villaescusa-Navarro, Francisco [Center for Computational Astrophysics, 160 5th Ave, New York, NY, 10010 (United States); Monaco, Pierluigi [Sezione di Astronomia, Dipartimento di Fisica, Università di Trieste, via G.B. Tiepolo 11, I-34143 Trieste (Italy); Munari, Emiliano [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, DK-2100 Copenhagen (Denmark); Borgani, Stefano [INAF – Astronomical Observatory of Trieste, via G.B. Tiepolo 11, I-34143 Trieste (Italy); Castorina, Emanuele [Berkeley Center for Cosmological Physics, University of California, Berkeley, CA 94720 (United States); Sefusatti, Emiliano, E-mail: luca.rizzo@cea.fr, E-mail: fvillaescusa@simonsfoundation.org, E-mail: monaco@oats.inaf.it, E-mail: munari@dark-cosmology.dk, E-mail: borgani@oats.inaf.it, E-mail: ecastorina@berkeley.edu, E-mail: emiliano.sefusatti@brera.inaf.it [INAF, Osservatorio Astronomico di Brera, Via Bianchi 46, I-23807 Merate (Italy)

2017-01-01

We present a method that extends the capabilities of the PINpointing Orbit-Crossing Collapsed HIerarchical Objects (PINOCCHIO) code, allowing it to generate accurate dark matter halo mock catalogues in cosmological models where the linear growth factor and the growth rate depend on scale. Such cosmologies comprise, among others, models with massive neutrinos and some classes of modified gravity theories. We validate the code by comparing the halo properties from PINOCCHIO against N-body simulations, focusing on cosmologies with massive neutrinos: νΛCDM. We analyse the halo mass function, halo two-point correlation function and halo power spectrum, showing that PINOCCHIO reproduces the results from simulations with the same level of precision as the original code (∼ 5–10%). We demonstrate that the abundance of halos in cosmologies with massless and massive neutrinos from PINOCCHIO matches very well the outcome of simulations, and point out that PINOCCHIO can reproduce the Ω{sub ν}–σ{sub 8} degeneracy that affects the halo mass function. We finally show that the clustering properties of the halos from PINOCCHIO matches accurately those from simulations both in real and redshift-space, in the latter case up to k = 0.3 h Mpc{sup −1}. We emphasize that the computational time required by PINOCCHIO to generate mock halo catalogues is orders of magnitude lower than the one needed for N-body simulations. This makes this tool ideal for applications like covariance matrix studies within the standard ΛCDM model but also in cosmologies with massive neutrinos or some modified gravity theories.

Clean development mechanism and domestic policies and measures

International Nuclear Information System (INIS)

Karsenty, A.

2002-02-01

The study aims to show in an axiomatic micro economic framework, the impacts of the clean development mechanism on the development. To illustrate the analysis, two main sectors of the control of the contribution level of developing countries to the CO 2 rate increase in the atmosphere, have been chosen: the electric power sector in India and the forestry. The simulation, the experimental methodology and the results are presented. (A.L.B.)

From joint implementation to a clean development mechanism : Have the African positions changed?

International Nuclear Information System (INIS)

Thomas, J.P.

1998-01-01

The economic and political implications of the applications of the Kyoto United Nations Framework Conference on Climate Change for African developing nations were discussed. The concepts of joint implementation, clean development mechanism, and ecological implications were presented. Also discussed were the African positions on these matters, and on the mechanism of Article 12 of the Kyoto protocol (the Clean Development Mechanism). 19 refs., 1 tab

Intra- and Extra-Union Flexibility in Meeting the European Union's Emission Reduction Targets

OpenAIRE

Tol, Richard S. J.

2009-01-01

The EU has proposed four flexibility mechanisms for the regulation of greenhouse gas emissions in the period 2013-2020: (1) the Emissions Trade Scheme (ETS), a permit market between selected companies; (2) trade in non-ETS allotments between Member States; (3) the Clean Development Mechanism (CDM) to purchase offsets in developing countries; and (4) trade in CDM warrants between Member States. This paper shows that aggregate abatement costs fall as flexibility increases. However, limited flex...

Scoping study on SADC energy sector carbon market potential; SADC = Southern African Development Community

Energy Technology Data Exchange (ETDEWEB)

2010-10-22

This study shows that, while there is a certain degree of institutional and project development capacity in the region and significant Clean Development Mechanism (CDM) potential, very little of this potential is currently being tapped. National institutional structures are mostly very new, understaffed, and working in isolation from each other. There are ongoing national CDM capacity building programmes in several SADC countries that will address barriers and develop projects at a national level, but there are also regional opportunities that these programmes will not address. For some of large scale project opportunities such as landfill gas, industrial energy use, fugitive emission and transport, a national approach is required because these projects depend on local industrial base, regulatory environment, and are also large enough that the carbon revenue can cover the transaction costs. There are a few key areas that should be addressed, however, at a regional level: Energy trade and power development: any low carbon power projects that are developed to serve regional energy needs and displace coal fired power can only receive carbon credits if the baseline is a regional power grid rather than just a national grid. This is also true for large scale energy efficiency projects in countries that have only hydropower - these would not receive any carbon credits unless there is justification for a regional grid definition that includes fossil fuel fired power stations.Small scale projects: While the total potential for small scale renewables may not be large in terms of tonnes of CO{sub 2} mitigated, the local development impacts of distributed renewable energy and energy efficiency projects are very large. For these projects to be implemented at a large enough scale to recoup the transaction costs of project development, a regional approach is critical. The CDM 'Programme of Activities' (PoA) approach is ideally suited for such regional small scale energy

A non-parametric consistency test of the ΛCDM model with Planck CMB data

Energy Technology Data Exchange (ETDEWEB)

Aghamousa, Amir; Shafieloo, Arman [Korea Astronomy and Space Science Institute, Daejeon 305-348 (Korea, Republic of); Hamann, Jan, E-mail: amir@aghamousa.com, E-mail: jan.hamann@unsw.edu.au, E-mail: shafieloo@kasi.re.kr [School of Physics, The University of New South Wales, Sydney NSW 2052 (Australia)

2017-09-01

Non-parametric reconstruction methods, such as Gaussian process (GP) regression, provide a model-independent way of estimating an underlying function and its uncertainty from noisy data. We demonstrate how GP-reconstruction can be used as a consistency test between a given data set and a specific model by looking for structures in the residuals of the data with respect to the model's best-fit. Applying this formalism to the Planck temperature and polarisation power spectrum measurements, we test their global consistency with the predictions of the base ΛCDM model. Our results do not show any serious inconsistencies, lending further support to the interpretation of the base ΛCDM model as cosmology's gold standard.

Climate change and developing countries: A role for the Canadian International Development Agency

International Nuclear Information System (INIS)

Ragusa, P.

2000-01-01

The Canadian International Development Agency (CIDA) is primarily responsible for Canada's official development assistance program whose objective is to foster sustainable development in order to reduce poverty and contribute to a more secure, equitable and prosperous world. CIDA programs are directed to the needs of developing countries to assist them in capacity building, to provide financial resources and technology transfer, to help them to meet the cost of adaptation to adverse effects, and to develop and enhance indigenous capabilities. With respect to climate change, CIDA, in concert with other federal government departments, endeavours to maximize Canada's capabilities to meet international environmental commitments and Kyoto climate change targets at the lowest cost, ensure a level playing field with Canada's competitors by maximizing participation of major developed and developing economies in the Kyoto Protocol, and maximize opportunities for Canadian businesses in international projects and initiatives in climate change. Accordingly, the 2000 CIDA Budget provides official development assistance funding of $100 million over four years for technology transfer to help developing countries reduce their greenhouse gas emissions and promote sustainable development. First call for proposals is targeted for August 2001, with assessment of proposals and projects during September and second call for proposals before year end. Major provisions of the Kyoto Protocol, the purposes of the Clean Development Mechanism, the role that CIDA can play in support of implementation of CDM, benefits and opportunities provided by CDM are summarized. Ways in which private sector firms seeking to expand into developing countries can benefit by working with CIDA, are also discussed

Development of cooling and cleaning systems for enhanced gas ...

African Journals Online (AJOL)

In order to address these tar related problems a cleaning and cooling system has been developed in house that facilitates tar removal to acceptable levels tolerated by the internal combustion (IC) engine and meets emission standards as well. The main objective of the present work is to reduce tar level and develop control ...

Weak lensing cosmology beyond ΛCDM

International Nuclear Information System (INIS)

Das, Sudeep; Linder, Eric V.; Nakajima, Reiko; Putter, Roland de

2012-01-01

Weak gravitational lensing is one of the key probes of the cosmological model, dark energy, and dark matter, providing insight into both the cosmic expansion history and large scale structure growth history. Taking into account a broad spectrum of physics affecting growth — dynamical dark energy, extended gravity, neutrino masses, and spatial curvature — we analyze the cosmological constraints. Similarly we consider the effects of a range of systematic uncertainties, in shear measurement, photometric redshifts, intrinsic alignments, and the nonlinear power spectrum, on cosmological parameter extraction. We also investigate, and provide fitting formulas for, the influence of survey parameters such as redshift depth, galaxy number densities, and sky area on the cosmological constraints in the beyond-ΛCDM parameter space. Finally, we examine the robustness of results for different fiducial cosmologies

Study on the influence of package parasitics and substrate resistance on the Charged Device Model(CDM) failure levels - possible protection methodology

NARCIS (Netherlands)

Sowariraj, M.S.B.; Smedes, Theo; Salm, Cora; Mouthaan, A.J.; Kuper, F.G.

2003-01-01

Charged Device Model (CDM) type of Electrostatic Discharge (ESD) stress events are becoming the major reason for field returns in the Integrated Circuit (IC) industry especially with downscaling of device dimensions and increased usage of automated handlers. In the case of CDM stress, the IC is both

Engineering development of advanced physical fine coal cleaning for premium fuel applications

International Nuclear Information System (INIS)

1997-01-01

Bechtel, together with Amax Research and Development Center (Amax R ampersand D), has prepared this study which provides conceptual cost estimates for the production of premium quality coal-water slurry fuel (CWF) in a commercial plant. Two scenarios are presented, one using column flotation technology and the other the selective agglomeration to clean the coal to the required quality specifications. This study forms part of US Department of Energy program Engineering Development of Advanced Physical Fine Coal Cleaning for Premium Fuel Applications, (Contract No. DE-AC22- 92PC92208), under Task 11, Project Final Report. The primary objective of the Department of Energy program is to develop the design base for prototype commercial advanced fine coal cleaning facilities capable of producing ultra-clean coals suitable for conversion to stable and highly loaded CWF. The fuels should contain less than 2 lb ash/MBtu (860 grams ash/GJ) of HHV and preferably less than 1 lb ash/MBtu (430 grams ash/GJ). The advanced fine coal cleaning technologies to be employed are advanced column froth flotation and selective agglomeration. It is further stipulated that operating conditions during the advanced cleaning process should recover not less than 80 percent of the carbon content (heating value) in the run-of-mine source coal. These goals for ultra-clean coal quality are to be met under the constraint that annualized coal production costs does not exceed $2.5 /MBtu ($ 2.37/GJ), including the mine mouth cost of the raw coal. A further objective of the program is to determine the distribution of a selected suite of eleven toxic trace elements between product CWF and the refuse stream of the cleaning processes. Laboratory, bench-scale and Process Development Unit (PDU) tests to evaluate advanced column flotation and selective agglomeration were completed earlier under this program with selected coal samples. A PDU with a capacity of 2 st/h was designed by Bechtel and installed at

Topology in two dimensions. IV - CDM models with non-Gaussian initial conditions

Science.gov (United States)

Coles, Peter; Moscardini, Lauro; Plionis, Manolis; Lucchin, Francesco; Matarrese, Sabino; Messina, Antonio

1993-02-01

The results of N-body simulations with both Gaussian and non-Gaussian initial conditions are used here to generate projected galaxy catalogs with the same selection criteria as the Shane-Wirtanen counts of galaxies. The Euler-Poincare characteristic is used to compare the statistical nature of the projected galaxy clustering in these simulated data sets with that of the observed galaxy catalog. All the models produce a topology dominated by a meatball shift when normalized to the known small-scale clustering properties of galaxies. Models characterized by a positive skewness of the distribution of primordial density perturbations are inconsistent with the Lick data, suggesting problems in reconciling models based on cosmic textures with observations. Gaussian CDM models fit the distribution of cell counts only if they have a rather high normalization but possess too low a coherence length compared with the Lick counts. This suggests that a CDM model with extra large scale power would probably fit the available data.

Laser surface cleaning

International Nuclear Information System (INIS)

Freiwald, J.G.; Freiwald, D.A.

1994-01-01

The objective of this work is a laboratory demonstration that red-lead primer and two-part epoxy paints can be stripped from concrete and metal surfaces using surface cleaning systems based on pulsed-repetition CO 2 lasers. The three goals are to: (1) demonstrate coatings removal, including surface pore cleaning; (2) demonstrate that there is negligible release of ablated contaminants to the environment; and (3) demonstrate that the process will generate negligible amounts of additional waste compared to competing technologies. Phase 1 involved site visits to RMI and Fernald to assess the cleaning issues for buildings and parts. In addition, Phase 1 included detailed designs of a more powerful system for industrial cleaning rates, including laser, articulating optics, ablated-material capture suction nozzle attached to a horizontal raster scanner for floor cleaning, and filtration system. Some concept development is also being done for using robots, and for parts cleaning. In Phase 2 a transportable 6 kW system will be built and tested, with a horizontal surface scanner for cleaning paint from floors. The laboratory tests will again be instrumented. Some concept development will continue for using robots, and for parts cleaning. This report describes Phase 1 results

Development of filters for exhaust air or off-gas cleaning

International Nuclear Information System (INIS)

Wilhelm, J.

1988-01-01

The activities of the 'Laboratorium fuer Aerosolphysik und Filtertechnik II' of the 'Kernforschungszentrum Karlsruhe' concentrate on the development of filters to be used for cleaning nuclear and conventional exhaust air and off-gas. Originally, these techniques were intended to be applied in nuclear facilities only. Their application for conventional gas purification, however, has led to a reorientation of research and development projects. By way of example, it is reported about the use of the multi-way sorption filter for radioiodine removal in nuclear power plants and following flue-gas purification in heating power plants as well as for off-gas cleaning in chemical industry. The improvement of HEPA filters and the development of metal fibre filters has led to components which can be used in the range of high humidity and moisture as well as at high temperatures and an increased differential pressure. The experience obtained in the field of high-efficiency filtering of nuclear airborne particles is made use of during the investigations concerning the removal of particles of conventional pollutants in the submicron range. A technique of radioiodine removal and an improved removal of airborne particles has been developed for use in the future reprocessing plant. Thus, a maximum removal efficiency can be achieved and an optimum waste management is made possible. It is reported about the components obtained as a result of these activities and their use for off-gas cleaning in the Wackersdorf reprocessing plant (WAW). (orig.) [de

Confronting dark energy models mimicking ΛCDM epoch with observational constraints: Future cosmological perturbations decay or future Rip?

International Nuclear Information System (INIS)

Astashenok, Artyom V.; Odintsov, Sergei D.

2013-01-01

We confront dark energy models which are currently similar to ΛCDM theory with observational data which include the SNe data, matter density perturbations and baryon acoustic oscillations data. DE cosmology under consideration may evolve to Big Rip, type II or type III future singularity, or to Little Rip or Pseudo-Rip universe. It is shown that matter perturbations data define more precisely the possible deviation from ΛCDM model than consideration of SNe data only. The combined data analysis proves that DE models under consideration are as consistent as ΛCDM model. We demonstrate that growth of matter density perturbations may occur at sufficiently small background density but still before the possible disintegration of bound objects (like clusters of galaxies, galaxies, etc.) in Big Rip, type III singularity, Little Rip or Pseudo-Rip universe. This new effect may bring the future universe to chaotic state well before disintegration or Rip.

A nonlinear CDM based damage growth law for ductile materials

Science.gov (United States)

Gautam, Abhinav; Priya Ajit, K.; Sarkar, Prabir Kumar

2018-02-01

A nonlinear ductile damage growth criterion is proposed based on continuum damage mechanics (CDM) approach. The model is derived in the framework of thermodynamically consistent CDM assuming damage to be isotropic. In this study, the damage dissipation potential is also derived to be a function of varying strain hardening exponent in addition to damage strain energy release rate density. Uniaxial tensile tests and load-unload-cyclic tensile tests for AISI 1020 steel, AISI 1030 steel and Al 2024 aluminum alloy are considered for the determination of their respective damage variable D and other parameters required for the model(s). The experimental results are very closely predicted, with a deviation of 0%-3%, by the proposed model for each of the materials. The model is also tested with predictabilities of damage growth by other models in the literature. Present model detects the state of damage quantitatively at any level of plastic strain and uses simpler material tests to find the parameters of the model. So, it should be useful in metal forming industries to assess the damage growth for the desired deformation level a priori. The superiority of the new model is clarified by the deviations in the predictability of test results by other models.

Conversion of National Health Insurance Service-National Sample Cohort (NHIS-NSC) Database into Observational Medical Outcomes Partnership-Common Data Model (OMOP-CDM).

Science.gov (United States)

You, Seng Chan; Lee, Seongwon; Cho, Soo-Yeon; Park, Hojun; Jung, Sungjae; Cho, Jaehyeong; Yoon, Dukyong; Park, Rae Woong

2017-01-01

It is increasingly necessary to generate medical evidence applicable to Asian people compared to those in Western countries. Observational Health Data Sciences a Informatics (OHDSI) is an international collaborative which aims to facilitate generating high-quality evidence via creating and applying open-source data analytic solutions to a large network of health databases across countries. We aimed to incorporate Korean nationwide cohort data into the OHDSI network by converting the national sample cohort into Observational Medical Outcomes Partnership-Common Data Model (OMOP-CDM). The data of 1.13 million subjects was converted to OMOP-CDM, resulting in average 99.1% conversion rate. The ACHILLES, open-source OMOP-CDM-based data profiling tool, was conducted on the converted database to visualize data-driven characterization and access the quality of data. The OMOP-CDM version of National Health Insurance Service-National Sample Cohort (NHIS-NSC) can be a valuable tool for multiple aspects of medical research by incorporation into the OHDSI research network.

The Outlook of Carbon Prices. Price Range Forecast for European Union Allowances in European Union Emission Trading Scheme Phase III

NARCIS (Netherlands)

Yunyi Chen, Connie

2012-01-01

SUMMARY Climate change mitigation policy has evolved rapidly both internationally and domestically, especially since the introduction of Kyoto Protocol flexible mechanisms - Clean Development Mechanism (CDM), Joint Implementation (JI) and Emission Tradin

New clean energy enterprises and sustainable development

Energy Technology Data Exchange (ETDEWEB)

Usher, Eric [United Nations Environment Programme, Rural Energy Enterprise Development (REED), Paris (France); Xiaodong Wang [United Nations Foundation, Climate Change Program, Washington, DC (United States)

2002-06-01

Though hundreds of billions of dollars have been invested, past development efforts have been largely unable to break the cycle of poverty - a cycle that is directly linked to the provision of energy. Too often, the potential of local enterprises to provide essential energy services has been ignored. Yet such an enterprise is one of the most potent engines for shifting towards a local human capacity to produce and distribute modern energy services. This recognition lies at the heart of REED, an approach to developing new sustainable energy enterprises that use clean, efficient and renewable energy technologies to meet the energy needs of underserved populations. (Author)

Hydropower may produce more greenhouse gases

International Nuclear Information System (INIS)

Kolshus, Hans H.; Folkestad, Tonje

2002-01-01

According to this article, dam projects in hydropower development may lead to increased emission of greenhouse gases and may create great inconveniences for the local community. Hence it is not without problems to sponsor such projects through the Clean Development Mechanism (CDM) of the Kyoto Protocol. In many countries the great era of hydroelectric development is over and the potential is now in the developing countries. The aim of the CDM is two-fold: sustainable development in the developing countries, and cheap reduction of greenhouse gas emission from developed nations. It has been agreed upon in the climate negotiations that it is the developing country receiving the investments that shall document that the projects conform to the goal of sustainable development of that country. The concept of sustain ability is a vague one, and it is a great challenge to make it more precise so that requirements may be posed on CDM projects. This is important as projects that are suitable from a climate point of view may have undesirable environmental or social effects, which may be in conflict with the goal of sustainable development. This also pertains to hydropower. It also appears that water reservoirs are not always as clean as has been assumed

PWR steam generator chemical cleaning. Phase I: solvent and process development. Volume II

International Nuclear Information System (INIS)

Larrick, A.P.; Paasch, R.A.; Hall, T.M.; Schneidmiller, D.

1979-01-01

A program to demonstrate chemical cleaning methods for removing magnetite corrosion products from the annuli between steam generator tubes and the tube support plates in vertical U-tube steam generators is described. These corrosion products have caused steam generator tube ''denting'' and in some cases have caused tube failures and support plate cracking in several PWR generating plants. Laboratory studies were performed to develop a chemical cleaning solvent and application process for demonstration cleaning of the Indian Point Unit 2 steam generators. The chemical cleaning solvent and application process were successfully pilot-tested by cleaning the secondary side of one of the Indian Point Unit 1 steam generators. Although the Indian Point Unit 1 steam generators do not have a tube denting problem, the pilot test provided for testing of the solvent and process using much of the same equipment and facilities that would be used for the Indian Point Unit 2 demonstration cleaning. The chemical solvent selected for the pilot test was an inhibited 3% citric acid-3% ascorbic acid solution. The application process, injection into the steam generator through the boiler blowdown system and agitation by nitrogen sparging, was tested in a nuclear environment and with corrosion products formed during years of steam generator operation at power. The test demonstrated that the magnetite corrosion products in simulated tube-to-tube support plate annuli can be removed by chemical cleaning; that corrosion resulting from the cleaning is not excessive; and that steam generator cleaning can be accomplished with acceptable levels of radiation exposure to personnel

Sustainable Development Impacts of NAMAs: An integrated approach to assessment of co-benefits based on experience with the CDM

DEFF Research Database (Denmark)

Olsen, Karen Holm

to assess the SD impacts of NAMAs. This paper argues for a new integrated approach to asses NAMAs' SD impacts that consists of SD indicators, procedures for stakeholder involvement and safeguards against negative impacts. The argument is based on a review of experience with the CDM’s contribution to SD...... and a comparison of similarities and differences between NAMAs and CDM. Five elements of a new approach towards assessment of NAMAs SD impacts are suggested based on emerging approaches and methodologies for monitoring, reporting and verification (MRV) of greenhouse gas reductions and SD impacts of NAMAs....

Carbon finance options in renewable energy

International Nuclear Information System (INIS)

Nahar, P.

2010-01-01

The Kyoto Protocol splits the world into two categories, notably Annex 1 with binding targets; and non-Annex 1 without any binding targets. This presentation discussed the Kyoto Protocol, with particular reference to the flexibility mechanisms which allow countries to achieve their emission targets in a cost effective way through emission trading, joint implementation, or clean development mechanisms (CDM). The CDM was outlined in detail in terms of how it works. The CDM key concepts include baseline use, additionality, and monitoring. Reasons for risk and CDM renewable energy projects were also outlined. Other topics that were presented included the impact of carbon finance; United States federal climate policy; European Union policy; EVO structured carbon; portfolio management; and EVO structured carbon. tabs., figs.

Of the clean development mechanism to the program of activities: an analysis of the bio diesel and wind energy uses in Brazil; Do mecanismo de desenvolvimento limpo ao programa de atividades: uma analise do uso do biodiesel e da energia eolica no Brasil

Energy Technology Data Exchange (ETDEWEB)

Rocha, Mayra Jupyara Braga

2009-05-15

The current actions of economic and industrial activities have resulted in increase of the concentration of greenhouse gases in the atmosphere since 1750. According to IPCC (2007) this alteration can increase the average temperature in the planet between 1,8 and 4,0 deg C up to 2100. The climate changes and the global warming are the most complicated environmental questions of our time and the actions took now will have effect on the future generations. In this context, a series of world-wide conferences and diverse scientific quarrels had occurred throughout the last decade, which culminated in the most important multilateral agreement firmed on climate changes, the Kyoto Protocol, signed in 1997. The Protocol is a landmark in the attempts of mitigation of the climate changes, since it established the commitment of the industrialized countries with emissions reduction targets of 5,2% to the level of 1990 emissions. To achieve such targets these countries count on three flexibilization mechanisms provided by the Kyoto Protocol: Joint implementation, Emission Trading and the Clean Development Mechanism (CDM) that it will be object of this study. The objective of this thesis is to carry through an evaluation of the CDM since its conception until the current days, searching to identify its dynamics and the main inherent gaps of this instrument and finally present two case studies of the bio diesel and wind energy uses in Brazil. (author)

Dynamics of clean coal-fired power generation development in China

International Nuclear Information System (INIS)

Yue, Li

2012-01-01

Coal-fired power technology will play an important role over a long period in China. Clean coal-fired power technology is essential for the global GHG emission reduction. Recently, advanced supercritical (SC)/ultra-supercritical (USC) technology has made remarkable progress in China and greatly contributed to energy saving and emission reduction. This study analyzes the dynamics of SC/USC development in China from an integrated perspective. The result indicates that, besides the internal demand, the effective implementation of domestic public policy and technology transfer contributed greatly to the development of SC/USC technology in China. In future low carbon scenario, SC/USC coal-fired power technology might still be the most important power generation technology in China until 2040, and will have a significant application prospect in other developing countries. The analysis makes a very useful introduction for other advanced energy technology development, including a renewable energy technology, in China and other developing countries. - Highlights: ► The US/USC technology is the key clean coal-fired power technology in current China. ► The domestic policy and technology transfer largely contributed to their development. ► This makes a useful introduction for the development of renewable energy in China.

The role of LDCs in conservation and demand management in 2007 : the Ontario Clean Air Alliance's response to the Ontario Power Authority's options paper

International Nuclear Information System (INIS)

Gibbons, J.

2006-01-01

A response to The Ontario Power Authority (OPA) discussion paper on the role of local distribution companies (LDC) was presented, with reference to conservation and demand management (CDM). This paper examined 2 implicit issues raised by the OPA paper: (1) the appropriate role of the OPA with respect to conservation and demand management, and (2) the role of the Ontario Energy Board (OEB) in streamlining its CDM regulatory approval process. It was suggested that LDCs are ideal agencies for the delivery of CDM as they are trusted sources of energy information and have existing business relationships with electricity consumers. Local electric utilities understand local conditions and needs and are better placed to meet them. Ontario's electric utilities are now eligible for conservation profit bonuses equal to 5 per cent of the bill savings that their energy efficiency programs create for customers. It was noted that the benefits of CDM programs have already been demonstrated. The establishment of CDM budget targets was advised. Options to finance CDM programs were reviewed, as well as various energy efficiency programs. It was suggested that the OPA should continue to be a strong public advocate for CDM, and promote stricter provincial and federal energy efficiency standards. Recommendations for streamlining the OEB's CDM regulatory approval process were presented. It was concluded that marginalizing the role of Ontario's electric utilities in the delivery of CDM programs will short-circuit Ontario's efforts to develop a conservation culture. 13 refs

Is LambdaCDM consistent with the Tully-Fisher relation?

Science.gov (United States)

Reyes, Reinabelle; Gunn, J. E.; Mandelbaum, R.

2013-07-01

We consider the question of the origin of the Tully-Fisher relation in LambdaCDM cosmology. Reproducing the observed tight relation between stellar masses and rotation velocities of disk galaxies presents a challenge for semi-analytical models and hydrodynamic simulations of galaxy formation. Here, our goal is to construct a suite of galaxy mass models that is fully consistent with observations, and that also reproduces the observed Tully-Fisher relation. We take advantage of a well-defined sample of disk galaxies in SDSS with measured rotation velocities (from long-slit spectroscopy of H-alpha), stellar bulge and disk profiles (from fits to SDSS images), and average dark matter halo masses (from stacked weak lensing of a larger, similarly-selected sample). The primary remaining freedom in the mass models come from the final dark matter halo profile (after contraction from baryon infall and, possibly, feedback) and the stellar IMF. We find that the observed velocities are reproduced by models with Kroupa IMF and NFW (i.e., unmodified) dark matter haloes for galaxies with stellar masses 10^9-10^10 M_sun. For higher stellar masses, models with contracted NFW haloes are favored. A scenario in which the amount of halo contraction varies with stellar mass is able to reproduce the observed Tully-Fisher relation over the full stellar mass range of our sample from 10^9 to 10^11 M_sun. We present this as a proof-of-concept for consistency between LambdaCDM and the Tully-Fisher relation.

Research and development of electric vehicles for clean transportation.

Science.gov (United States)

Wada, Masayoshi

2009-01-01

This article presents the research and development of an electric vehicle (EV) in Department of Human-Robotics Saitama Institute of Technology, Japan. Electric mobile systems developed in our laboratory include a converted electric automobile, electric wheelchair and personal mobile robot. These mobile systems contribute to realize clean transportation since energy sources and devices from all vehicles, i.e., batteries and electric motors, does not deteriorate the environment. To drive motors for vehicle traveling, robotic technologies were applied.

Projeto de Mecanismo de Desenvolvimento Limpo: Um Estudo de Caso na Empresa de Energia Eólica do Estado do Piauí

Directory of Open Access Journals (Sweden)

Henrique César Melo Ribeiro

2012-08-01

Full Text Available In recent decades the problems with environmental accidents has become a concern due to the consequences it generates on a global scale. The concept of sustainability had as a starting point the ECO-92 Conference, which prompted the search for development models with social and environmental prevalence. The low-carbon economics appears as an option to stop the growth of the Greenhouse Gases Emissions. The third strategy of the Kyoto Protocol refers to the Clean Development Mechanism (CDM that allows countries and organizations to develop projects aimed at sustainable development. According to this situation, the paper aims to investigate how the use of clean energy, such as wind, contributes to the promotion of local sustainability. It establishes, as objective, the investigation of the wind farm installed in Piauí regarding the meet of the Kyoto Protocol requirement. As to its methodological aspects, this is a bibliographical, documentary and case study research. The literature review allowed us to deepen theoretical assumptions related to the topic. The analysis of documents obtained in the case study has shown the state's participation in clean energy generation and use of CDM strategies in the enterprise. The research reveals that the studied wind farm meets the guidelines contained in the Kyoto Protocol and makes use of CDM strategies. It is still verified the contributive work to local sustainability through the concern for education, environmental management and support on social projects in areas related to children, education and environment.

Development of construction specifications to attain clean rooms for the NOVA laser facility

International Nuclear Information System (INIS)

Benedix, C.P.

1980-02-01

This paper describes the process of defining technical requirements for a major Department of Energy Research and Development Facility and subsequent development of construction specifications for the clean spaces in that facility. The organizational interactions between technical client, Engineering and Construction elements are described. The importance of an interdisciplinary team approach is stressed. A brief description of the SHIVA Laser and NOVA Laser Clean Spaces is included to indicate the scope of the facility undertaking. A number of potential pitfalls are discussed that may be helpful to designers of new facilities

Development of advanced coal cleaning process; Kodo sekitan kaishitsu gijutsu no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Osaka, S [Center for Coal Utilization, Japan, Tokyo (Japan); Akimoto, A; Yamashita, T [Idemitsu Kosan Co. Ltd., Tokyo (Japan)

1996-09-01

This paper aims to develop a clean coal production process which excellently removes environmental pollutant, is low-costed, and need no particular systems for distribution of products. The result of the development was described paying attention to column flotation which is a technology to high-efficiently select particulate regions, particulate heavy media cyclone, magnetic separation, and the basic design of the process into which those above were integrated. The two-stage selection process, which is an integration of column flotation and particulate heavy media cyclone into the conventional coal preparation equipment, can produce low-ash clean coal at high separation efficiency and also suppress the rise in processing cost. This process was also effective for removal of sulfur content and trace metal elements. The use of clean coal at power plant can be effective for not only the reduction in ash treatment amount, but the aspect of boiler operation characteristics such as heat transfer efficiency of boiler furnace wall, ash related troubles, loads of electrostatic precipitator, loads of flue gas desulfurization facilities. 17 figs., 5 tabs.

The clean development mechanism versus international permit trading: The effect on technological change

International Nuclear Information System (INIS)

Hagem, Cathrine

2009-01-01

The clean development mechanism of the Kyoto Protocol may induce technological change in developing countries. As an alternative to the clean development mechanism regime, developing countries may accept a (generous) cap on their own emissions, allow domestic producers to invest in new efficient technologies, and sell the excess emission permits on the international permit market. The purpose of this article is to show how the gains from investment, and hence the incentive to invest in new technology in developing countries, differ between the two alternative regimes. We show that the difference in the gains from investment depends on whether the producers in developing countries face competitive or noncompetitive output markets, whether the investment affects fixed or variable production costs, and whether producers can reduce emissions through means other than investing in new technology. (author)

On a Search for Hidden Photon CDM by a Multicathode Counter

International Nuclear Information System (INIS)

Petukhov, V. V.; Kopylov, A. V.; Orekhov, I. V.

2016-01-01

We report a new technique of a multicathode counter (MCC) developed to search for hidden photon (HP) cold dark matter (CDM) with a mass from 5 to 500 eV. The method is suggested in the assumption that HP-photon mixing causes emission of single electrons from a metal cathode if the mass of hidden photon m_γ_"′ is greater than a work function of the metal φ_W. The measured effect from HP should be dependent on φ_W and on the structure of electronic shells of the metal used as a cathode. Potentially this can be used for a verification of the results obtained. Some preliminary results for the upper limit for mixing parameter χ have been obtained for HP with a mass from 5 eV to 10 keV as a pure illustration of the potential of this technique. The efforts are continued to refine the procedure of data treatment and to improve the work of MCC. A new detector with a more developed design is under construction.

A COMPARATIVE ANALYSIS OF THE SUPERNOVA LEGACY SURVEY SAMPLE WITH ΛCDM AND THE Rh=ct UNIVERSE

International Nuclear Information System (INIS)

Wei, Jun-Jie; Wu, Xue-Feng; Melia, Fulvio; Maier, Robert S.

2015-01-01

The use of Type Ia supernovae (SNe Ia) has thus far produced the most reliable measurement of the expansion history of the universe, suggesting that ΛCDM offers the best explanation for the redshift–luminosity distribution observed in these events. However, analysis of other kinds of sources, such as cosmic chronometers, gamma-ray bursts, and high-z quasars, conflicts with this conclusion, indicating instead that the constant expansion rate implied by the R h = ct universe is a better fit to the data. The central difficulty with the use of SNe Ia as standard candles is that one must optimize three or four nuisance parameters characterizing supernova (SN) luminosities simultaneously with the parameters of an expansion model. Hence, in comparing competing models, one must reduce the data independently for each. We carry out such a comparison of ΛCDM and the R h = ct universe using the SN Legacy Survey sample of 252 SN events, and show that each model fits its individually reduced data very well. However, since R h = ct has only one free parameter (the Hubble constant), it follows from a standard model selection technique that it is to be preferred over ΛCDM, the minimalist version of which has three (the Hubble constant, the scaled matter density, and either the spatial curvature constant or the dark energy equation-of-state parameter). We estimate using the Bayes Information Criterion that in a pairwise comparison, the likelihood of R h = ct is ∼90%, compared with only ∼10% for a minimalist form of ΛCDM, in which dark energy is simply a cosmological constant. Compared to R h = ct, versions of the standard model with more elaborate parametrizations of dark energy are judged to be even less likely

Clean coal technologies

International Nuclear Information System (INIS)

Aslanyan, G.S.

1993-01-01

According to the World Energy Council (WEC), at the beginning of the next century three main energy sources - coal, nuclear power and oil will have equal share in the world's total energy supply. This forecast is also valid for the USSR which possesses more than 40% of the world's coal resources and continuously increases its coal production (more than 700 million tons of coal are processed annually in the USSR). The stringent environmental regulations, coupled with the tendency to increase the use of coal are the reasons for developing different concepts for clean coal utilization. In this paper, the potential efficiency and environmental performance of different clean coal production cycles are considered, including technologies for coal clean-up at the pre-combustion stage, advanced clean combustion methods and flue gas cleaning systems. Integrated systems, such as combined gas-steam cycle and the pressurized fluidized bed boiler combined cycle, are also discussed. The Soviet National R and D program is studying new methods for coal utilization with high environmental performance. In this context, some basic research activities in the field of clean coal technology in the USSR are considered. Development of an efficient vortex combustor, a pressurized fluidized bed gasifier, advanced gas cleaning methods based on E-beam irradiation and plasma discharge, as well as new catalytic system, are are presented. In addition, implementation of technological innovations for retrofitting and re powering of existing power plants is discussed. (author)

Research report for fiscal 1998. Promotion of activities implemented jointly etc. in China; 1998 nendo Chugoku ni okeru kyodo jisshi katsudo nado suishin chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The Kyoto Protocol allows some flexibility in the implementation of methods for achieving the goal, such as emission trading, activities implemented jointly (AIJ) among advanced countries, construction of clean development mechanisms (CDM) with developing countries, etc., and Japan intends to positively make use of them for the achievement of the goal. For China, who holds second place in the list of greenhouse gas emitting countries in the world, the promotion of CDM is quite important. With the situation taken into consideration, interaction was effected with Chinese officers and scientists of government agencies and academic institutes involved in environmental matters, and researches were conducted. Views and information were exchanged regarding environmental problems and, after on-site investigations, researches were conducted and suggestions were presented as to how AIJ and CDM should be. The suggestions covered Chinese policies toward AIJ and CDM, current state of AIJ projects in China and systems for their promotion, means for enhancing such projects, and discovery of candidates for AIJ and CDM project application. (NEDO)

Improving Credit Allocation to Sustaiable Agriculture in Sub ...

African Journals Online (AJOL)

This development may be attributed to how these institutions rate the business of agriculture and the risks involved. However the slow pace of financing sustainable agriculture (biobased economy) in the presence of internationalization (Clean Development Mechanism CDM and voluntary carbon) needs to be analyzed.

Development of the EU Ecolabel Criteria and Revision of the EU Green Public Procurement Criteria for Cleaning Services

OpenAIRE

DE ALMEIDA FERREIRA NETO BELMIRA; WOLF Oliver; FIELD Bethany; JENKIN Nicola; TAM Max; BENJAMIN Oscar

2016-01-01

The objective of this project is to develop a new EU Ecolabel and revise the existing EU Green Public Procurement (GPP) criteria for professional cleaning services (hereafter referred to as cleaning services). This preliminary report investigates the market, operational and sustainability aspects of cleaning services, with a goal to develop a robust evidence base and prioritise key environmental and social issues to support the development of EU Ecolabel criteria and the revision of the EU GP...

Emergency air cleaning system development for LMFBR containments

International Nuclear Information System (INIS)

McCormack, J.D.; Hilliard, R.K.; Postma, A.K.; Muhlestein, L.D.

1975-01-01

Criteria for evaluating the various types of Emergency Air Cleaning Systems which may be used in LMFBR plants have been established for both single containment and containment-confinement arrangements. These two plant arrangements have quite different air cleaning requirements for postulated design base accident conditions. Work is currently in progress to select from a list of candidate air cleaning systems those which best meet the criteria requirements. By means of a weighted rating system, areas of strength or weakness can be found and the conceptual system design then optimized. The final system arrangements will be ranked and several of the most promising systems selected for large-scale tests in the former CSE vessel at Hanford. 8 references. (U.S.)

The development of clean-burning, noncatalytic manufactured fireplaces

International Nuclear Information System (INIS)

Broome, F.H.

1992-01-01

Concern for the air quality of this country in general and the Western states in particular has brought sharp focus from regulators on the emissions of Particulate Matter (PM) from all wood-burning appliances. This concern was a driving force which led to the development of a clean-burning fireplace. Many Western areas have begun to limit installation of wood-burning appliances in new construction. Some jurisdictions allow only Environmental Protection Agency (EPA) certified appliances. Currently no federal test methods or standards exist for fireplaces so the Manufactured Fireplace Industry, through the Hearth Products Association (HPA), set about to develop suitable test methods and standards for manufactured fireplaces

Clean coal technologies: Research, development, and demonstration program plan

Energy Technology Data Exchange (ETDEWEB)

1993-12-01

The US Department of Energy, Office of Fossil Energy, has structured an integrated program for research, development, and demonstration of clean coal technologies that will enable the nation to use its plentiful domestic coal resources while meeting environmental quality requirements. The program provides the basis for making coal a low-cost, environmentally sound energy choice for electric power generation and fuels production. These programs are briefly described.

ΛCDM model with dissipative nonextensive viscous dark matter

Science.gov (United States)

Gimenes, H. S.; Viswanathan, G. M.; Silva, R.

2018-03-01

Many models in cosmology typically assume the standard bulk viscosity. We study an alternative interpretation for the origin of the bulk viscosity. Using nonadditive statistics proposed by Tsallis, we propose a bulk viscosity component that can only exist by a nonextensive effect through the nonextensive/dissipative correspondence (NexDC). In this paper, we consider a ΛCDM model for a flat universe with a dissipative nonextensive viscous dark matter component, following the Eckart theory of bulk viscosity, without any perturbative approach. In order to analyze cosmological constraints, we use one of the most recent observations of Type Ia Supernova, baryon acoustic oscillations and cosmic microwave background data.

Mapping the Indicators. An Analysis of Sustainable Development Requirements of Selected Market Mechanisms and Multilateral Institutions

DEFF Research Database (Denmark)

Arens, Christof; Mersmann, Florian; Beuermann, Christiane

Investors are paying more and more attention to the co-benefits of climate finance. Financing activities aimed at emission mitigation must not only result in the reduction of greenhouse gas emissions, the enhancement of mitigation, adaptive capacity and adaptation strategies, but should also...... produce additional outcomes on other environmental, social or economic aspects of sustainable development. The Clean Development Mechanism (CDM) was created precisely to cover these two aspects: firstly, to achieve cost-effective mitigation of greenhouse gases and secondly, to assist developing countries...... in achieving sustainable development based on their national development priorities and strategies. However, complying with the second objective turned out to be problematic. Registered projects appeared that had no proven sustainable development benefits, or even perceived negative impacts. Consequently...

Sinks and sources : a strategy to involve forest communities in Tanzania in global climate policy

NARCIS (Netherlands)

Zahabu, E.M.

2008-01-01

At present only the sink ability of forest to sequester atmospheric CO2 through establishing new forests is credited under the current UNFCCC climate change mitigation mechanisms in developing countries, i.e. the Clean Development Mechanism (CDM) of the Kyoto Protocol. Other forest practices such as

National Alliance for Clean Energy Incubators New Mexico Clean Energy Incubator

Energy Technology Data Exchange (ETDEWEB)

Roberts, Suzanne S.

2004-12-15

The National Alliance for Clean Energy Incubators was established by the National Renewable Energy Laboratory (NREL) to develop an emerging network of business incubators for entrepreneurs specializing in clean energy enterprises. The Alliance provides a broad range of business services to entrepreneurs in specific geographic locales across the U.S. and in diverse clean energy technology areas such as fuel cells, alternative fuels, power generation, and renewables, to name a few. Technology Ventures Corporation (TVC) participates in the Alliance from its corporate offices in Albuquerque, NM, and from its sites in Northern and Southern New Mexico, California, and Nevada. TVC reports on the results of its attempts to accelerate the growth and success of clean energy and energy efficiency companies through its array of business support services. During the period from September 2002 through September 2004, TVC describes contributions to the Alliance including the development of 28 clients and facilitating capital raises exceeding $35M.

Cosmic constraint on massive neutrinos in viable f(R) gravity with producing ΛCDM background expansion

Energy Technology Data Exchange (ETDEWEB)

Lu, Jianbo; Wu, Yabo; Wang, Yan; Yang, Weiqiang [Liaoning Normal University, Department of Physics, Dalian (China); Liu, Molin [Xinyang Normal University, Department of Physics, Xinyang (China)

2016-12-15

Tensions between several cosmic observations were found recently, such as the inconsistent values of H{sub 0} (or σ{sub 8}) were indicated by the different cosmic observations. Introducing the massive neutrinos in ΛCDM could potentially solve the tensions. Viable f(R) gravity producing ΛCDM background expansion with massive neutrinos is investigated in this paper. We fit the current observational data: Planck-2015 CMB, RSD, BAO, and SNIa to constrain the mass of neutrinos in viable f(R) theory. The constraint results at 95% confidence level are: Σm{sub ν} < 0.202 eV for the active-neutrino case, m{sub ν,sterile}{sup eff} < 0.757 eV with N{sub eff} < 3.22 for the sterile neutrino case. For the effects due to the mass of the neutrinos, the constraint results on model parameter at 95% confidence level become f{sub R0} x 10{sup -6} > -1.89 and f{sub R0} x 10{sup -6} > -2.02 for two cases, respectively. It is also shown that the fitting values of several parameters much depend on the neutrino properties, such as the cold dark matter density, the cosmological quantities at matter-radiation equality, the neutrino density and the fraction of baryonic mass in helium. Finally, the constraint result shows that the tension between direct and CMB measurements of H{sub 0} gets slightly weaker in the viable f(R) model than that in the base ΛCDM model. (orig.)

Development of in situ cleaning techniques for diagnostic mirrors in ITER

International Nuclear Information System (INIS)

Litnovsky, A.; Laengner, M.; Matveeva, M.; Schulz, Ch.; Marot, L.; Voitsenya, V.S.; Philipps, V.; Biel, W.; Samm, U.

2011-01-01

Mirrors will be used in all optical and laser-based diagnostic systems of ITER. In the severe environment, the optical characteristics of mirrors will be degraded, hampering the entire performance of the respective diagnostics. A minute impurity deposition of 20 nm of carbon on the mirror is sufficient to decrease the mirror reflectivity by tens of percent outlining the necessity of the mirror cleaning in ITER. The results of R and D on plasma cleaning of molybdenum diagnostic mirrors are reported. The mirrors contaminated with amorphous carbon films in the laboratory conditions and in the tokamaks were cleaned in steady-state hydrogenic plasmas. The maximum cleaning efficiency of 4.2 nm/min was reached for the laboratory and soft tokamak hydrocarbon films, whereas for the hard tokamak films the carbidization of mirrors drastically decreased the cleaning efficiency down to 0.016 nm/min. This implies the necessity of sputtering cleaning of contaminated mirrors as the only reliable tool to remove the deposits by plasma cleaning. An overview of R and D program on mirror cleaning is provided along with plans for further studies and the recommendations for ITER mirror-based diagnostics.

Carbon trading as incentive for conversion to organic agriculture. Case study. Organic peanuts in Tanzania

Energy Technology Data Exchange (ETDEWEB)

Bodnar, F.

2005-12-15

In this pilot project, the climate effects of the conversion from conventional to organic cultivation of peanuts are evaluated. We could aim at voluntary carbon credits that do not comply with the CDM (Clean Development Mechanisms) rules, but we try to meet the CDM rules by combining it with a agroforestry component. However, in the example of Tanzania meeting the CDM rules was a problem. The agricultural system in Tanzania consists of a rotation of several years cultivation and several years fallow. This fallow of grass, shrubs and trees could be considered as 'forest'. Taking fallow land into cultivation would then be deforestation, which would make the planting of trees no longer eligible under CDM. This is a shame because the traditional 'slash and burn' system emits a lot of greenhouse gases.

Clean Energy Policy Analyses: Analysis of the Status and Impact of Clean Energy Policies at the Local Level

Energy Technology Data Exchange (ETDEWEB)

Busche, S.

2010-12-01

This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

Clean Energy Policy Analyses. Analysis of the Status and Impact of Clean Energy Policies at the Local Level

Energy Technology Data Exchange (ETDEWEB)

Busche, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2010-12-01

This report takes a broad look at the status of local clean energy policies in the United States to develop a better understanding of local clean energy policy development and the interaction between state and local policies. To date, the majority of clean energy policy research focuses on the state and federal levels. While there has been a substantial amount of research on local level climate change initiatives, this is one of the first analyses of clean energy policies separate from climate change initiatives. This report is one in a suite of reports analyzing clean energy and climate policy development at the local, state, and regional levels.

Understanding and managing leakage in forest-based greenhouse-gas-mitigation projects.

Science.gov (United States)

Schwarze, Reimund; Niles, John O; Olander, Jacob

2002-08-15

A major concern about land use, land-use change and forestry (LULUCF) projects under the Clean Development Mechanism (CDM) is the potential for leakage. Leakage refers to a net increase of greenhouse-gas emissions in an area outside the project resulting from the CDM activity. This paper provides an overview of leakage, its definitions and its causes. It describes ways that LULUCF projects may suffer from leakage and attempts to assess the magnitude of leakage risks for different LULUCF project types. It also summarizes some of the approaches, both in terms of policies and project development, to address LULUCF leakage.

Development of special tools for the cleaning of reactor's interior in HANARO

International Nuclear Information System (INIS)

Cho, Y.-G.; Le, J.-H.; Ryu, J.-S.; Wu, J.-S.; Jung, H.-S.

1999-01-01

The HANARO (Hi-flux Advanced Neutron Application Reactor) in Korea has been being operated for 5 years, including one year of non-nuclear system commissioning tests since the installation of the reactor in early 1994. The HANARO is an open-tank-in-pool type reactor which has the advantage of free access from the pool top. The HANARO reactor had special cleaning works twice to remove debris from the inside reactor. This paper summarizes the development of special tools for reactor cleaning and how the reactor's inside had been successfully cleaned within short periods. The first cleaning work, after the initial flushing of the reactor system in early 1994, was the removal of the silica-gel sands, contaminated during installation, from the reactor pool and all equipment in the pool, including the reactor structure, the reactivity control units and the primary cooling system. Water-jet, pump suction, vacuum suction and whirl methods were used in combination with specially designed tools. The second one, occurred in February 1997 after two years of reactor operation was the cleaning work for the reactor's interior to remove several metal pieces broken from the parts of a check valve assembly in the primary cooling system. This work required development of many special tools that are all compact in size and remotely operable to reach all areas of the inlet plenum through very limited access holes. The special tools used for this work were two kinds of underwater cameras equipped with lighting, a debris-picking tool named 'revolving dustpan', two kinds of flow tube replacement tools and many other supplementary tools. All work had been successfully accomplished on the in-pool-platform temporarily installed 9m above the pool bottom to maintain the pool water level required in view of radiation shielding. Finally, the reactor internals were inspected using the underwater cameras to confirm the absence of debris and the surface integrity of the plenum as well as all fuel

A Comparative Analysis of the Supernova Legacy Survey Sample With ΛCDM and the Rh=ct Universe

Science.gov (United States)

Wei, Jun-Jie; Wu, Xue-Feng; Melia, Fulvio; Maier, Robert S.

2015-03-01

The use of Type Ia supernovae (SNe Ia) has thus far produced the most reliable measurement of the expansion history of the universe, suggesting that ΛCDM offers the best explanation for the redshift-luminosity distribution observed in these events. However, analysis of other kinds of sources, such as cosmic chronometers, gamma-ray bursts, and high-z quasars, conflicts with this conclusion, indicating instead that the constant expansion rate implied by the Rh = ct universe is a better fit to the data. The central difficulty with the use of SNe Ia as standard candles is that one must optimize three or four nuisance parameters characterizing supernova (SN) luminosities simultaneously with the parameters of an expansion model. Hence, in comparing competing models, one must reduce the data independently for each. We carry out such a comparison of ΛCDM and the Rh = ct universe using the SN Legacy Survey sample of 252 SN events, and show that each model fits its individually reduced data very well. However, since Rh = ct has only one free parameter (the Hubble constant), it follows from a standard model selection technique that it is to be preferred over ΛCDM, the minimalist version of which has three (the Hubble constant, the scaled matter density, and either the spatial curvature constant or the dark energy equation-of-state parameter). We estimate using the Bayes Information Criterion that in a pairwise comparison, the likelihood of Rh = ct is ˜90%, compared with only ˜10% for a minimalist form of ΛCDM, in which dark energy is simply a cosmological constant. Compared to Rh = ct, versions of the standard model with more elaborate parametrizations of dark energy are judged to be even less likely. This work is dedicated to the memory of Prof. Tan Lu, who sadly passed away 2014 December 3. Among his many achievements, he is considered to be one of the founders of high-energy astrophysics, and a pioneer in modern cosmology, in China.

The role of offsets in a post-Kyoto climate agreement: The power sector in China

International Nuclear Information System (INIS)

Partridge, Ian; Gamkhar, Shama

2010-01-01

This paper considers how an offset scheme specific to the electricity generation sector could incentivize emissions cuts while avoiding the problems encountered by the Clean Development Mechanism (CDM). It proposes an approach to project evaluation based on measures of additionality, economic viability and contribution to sustainable development specific to this sector and re-evaluates 460 registered CDM projects in China that generate electricity using wind, natural gas or small hydro. It concludes that many small hydro schemes would be viable without the CDM subsidy. Although these projects have zero emissions from operations, offsets issued to projects that are viable without subsidy permit increased emissions in developed countries and lead to a net increase in global emissions. To provide some indication of the sustainable development benefits that CDM projects bring to their host countries, the paper includes estimates of the projects' benefit to public health due to the reduced use of coal for generation. The paper provides insights into the economics of projects and their value to host countries that are missed by the official CDM methodologies. It contributes to the debate over the design of sector-specific offset schemes that may be part of a new global agreement on combating climate change.

Developing a Performance Assessment Framework and Indicators for Communicable Disease Management in Natural Disasters.

Science.gov (United States)

Babaie, Javad; Ardalan, Ali; Vatandoost, Hasan; Goya, Mohammad Mehdi; Akbarisari, Ali

2016-02-01

Communicable disease management (CDM) is an important component of disaster public health response operations. However, there is a lack of any performance assessment (PA) framework and related indicators for the PA. This study aimed to develop a PA framework and indicators in CDM in disasters. In this study, a series of methods were used. First, a systematic literature review (SLR) was performed in order to extract the existing PA frameworks and indicators. Then, using a qualitative approach, some interviews with purposively selected experts were conducted and used in developing the PA framework and indicators. Finally, the analytical hierarchy process (AHP) was used for weighting of the developed indicators. The input, process, products, and outcomes (IPPO) framework was found to be an appropriate framework for CDM PA. Seven main functions were revealed to CDM during disasters. Forty PA indicators were developed for the four categories. There is a lack of any existing PA framework in CDM in disasters. Thus, in this study, a PA framework (IPPO framework) was developed for the PA of CDM in disasters through a series of methods. It can be an appropriate framework and its indicators could measure the performance of CDM in disasters.

Reheating via Gravitational Particle Production in Simple Models of Quintessence or ΛCDM Inflation

Directory of Open Access Journals (Sweden)

Jaume de Haro

2017-11-01

Full Text Available We have tested some simple Λ CDM (the same test is also valid for quintessence inflation models, imposing that they match with the recent observational data provided by the BICEP and Planck’s team and leading to a reheating temperature, which is obtained via gravitational particle production after inflation, supporting the nucleosynthesis success.

Engineering development of advanced physical fine coal cleaning technologies - froth flotation

Energy Technology Data Exchange (ETDEWEB)

Ferris, D.D.; Bencho, J.R. [ICF Kaiser Engineers, Inc., Pittsburgh, PA (United States)

1995-11-01

In 1988, ICF Kaiser Engineers was awarded DOE Contract No. DE-AC22-88PC88881 to research, develop, engineer and design a commercially acceptable advanced froth flotation coal cleaning technology. The DOE initiative is in support of the continued utilization of our most abundant energy resource. Besides the goal of commercialability, coal cleaning performance and product quality goals were established by the DOE for this and similar projects. primary among these were the goals of 85 percent energy recovery and 85 percent pyrite rejection. Three nationally important coal resources were used for this project: the Pittsburgh No. 8 coal, the Upper Freeport coal, and the Illinois No. 6 coal. Following is a summary of the key findings of this project.

Engineering development of advance physical fine coal cleaning for premium fuel applications

Energy Technology Data Exchange (ETDEWEB)

Jha, M.C.; Smit, F.J.; Shields, G.L. [AMAX R& D Center/ENTECH Global Inc., Golden, CO (United States)

1995-11-01

The objective of this project is to develop the engineering design base for prototype fine coal cleaning plants based on Advanced Column Flotation and Selective Agglomeration processes for premium fuel and near-term applications. Removal of toxic trace elements is also being investigated. The scope of the project includes laboratory research and bench-scale testing of each process on six coals followed by design, construction, and operation of a 2 tons/hour process development unit (PDU). Three coals will be cleaned in tonnage quantity and provided to DOE and its contractors for combustion evaluation. Amax R&D (now a subsidiary of Cyprus Amax Mineral Company) is the prime contractor. Entech Global is managing the project and performing most of the research and development work as an on-site subcontractor. Other participants in the project are Cyprus Amax Coal Company, Arcanum, Bechtel, TIC, University of Kentucky and Virginia Tech. Drs. Keller of Syracuse and Dooher of Adelphi University are consultants.

Emissions trading and transaction costs : analyzing the flaws in the discussion

NARCIS (Netherlands)

Woerdman, E.

Although emissions trading lowers the costs of climate change mitigation, transaction costs (e.g. to find a trading partner) may reduce its cost-effectiveness. Some economists claim that transaction costs for Joint Implementation (JI) and Clean Development Mechanism (CDM) projects will be higher

Nationally Appropriate Mitigation Action: Understanding NAMA Cycle

DEFF Research Database (Denmark)

Sharma, Sudhir; Desgain, Denis DR

There is no internationally defined or agreed Nationally Appropriate Mitigation Action(NAMA) cycle, as was the case, for example, with the Clean Development Mechanisms (CDM) project cycle. However, there are some common steps that NAMA identification, formulation, and implementation will all go...

THE VELOCITY FUNCTION IN THE LOCAL ENVIRONMENT FROM ΛCDM AND ΛWDM CONSTRAINED SIMULATIONS

International Nuclear Information System (INIS)

Zavala, J.; Jing, Y. P.; Faltenbacher, A.; Yepes, G.; Hoffman, Y.; Gottloeber, S.; Catinella, B.

2009-01-01

Using constrained simulations of the local universe for generic cold dark matter (CDM) and for 1 keV warm dark matter (WDM), we investigate the difference in the abundance of dark matter halos in the local environment. We find that the mass function (MF) within 20 h -1 Mpc of the Local Group is ∼2 times larger than the universal MF in the 10 9 -10 13 h -1 M sun mass range. Imposing the field of view of the ongoing H I blind survey Arecibo Legacy Fast ALFA (ALFALFA) in our simulations, we predict that the velocity function (VF) in the Virgo-direction region (VdR) exceeds the universal VF by a factor of 3. Furthermore, employing a scheme to translate the halo VF into a galaxy VF, we compare the simulation results with a sample of galaxies from the early catalog release of ALFALFA. We find that our simulations are able to reproduce the VF in the 80-300 km s -1 velocity range, having a value ∼10 times larger than the universal VF in the VdR. In the low-velocity regime, 35-80 km s -1 , the WDM simulation reproduces the observed flattening of the VF. In contrast, the simulation with CDM predicts a steep rise in the VF toward lower velocities; for V max = 35 km s -1 , it forecasts ∼10 times more sources than the ones observed. If confirmed by the complete ALFALFA survey, our results indicate a potential problem for the CDM paradigm or for the conventional assumptions about energetic feedback in dwarf galaxies.

Development of a matrix approach to estimate soil clean-up levels for BTEX compounds

International Nuclear Information System (INIS)

Erbas-White, I.; San Juan, C.

1993-01-01

A draft state-of-the-art matrix approach has been developed for the State of Washington to estimate clean-up levels for benzene, toluene, ethylbenzene and xylene (BTEX) in deep soils based on an endangerment approach to groundwater. Derived soil clean-up levels are estimated using a combination of two computer models, MULTIMED and VLEACH. The matrix uses a simple scoring system that is used to assign a score at a given site based on the parameters such as depth to groundwater, mean annual precipitation, type of soil, distance to potential groundwater receptor and the volume of contaminated soil. The total score is then used to obtain a soil clean-up level from a table. The general approach used involves the utilization of computer models to back-calculate soil contaminant levels in the vadose zone that would create that particular contaminant concentration in groundwater at a given receptor. This usually takes a few iterations of trial runs to estimate the clean-up levels since the models use the soil clean-up levels as ''input'' and the groundwater levels as ''output.'' The selected contaminant levels in groundwater are Model Toxic control Act (MTCA) values used in the State of Washington

Study on the Evolution Mechanism and Development Forecasting of China’s Power Supply Structure Clean Development

Directory of Open Access Journals (Sweden)

Xiaohua Song

2017-02-01

Full Text Available The clean development of China’s power supply structure has become a crucial strategic problem for the low-carbon, green development of Chinese society. Considering the subsistent developments of optimized allocation of energy resources and efficient utilization, the urgent need to solve environmental pollution, and the continuously promoted power market-oriented reform, further study of China’s power structure clean development has certain theoretical value. Based on the data analysis, this paper analyzes the key factors that influence the evolution process of the structure with the help of system dynamics theory and carries out comprehensive assessments after the construction of the structure evaluation system. Additionally, a forecasting model of the power supply structure development based on the Vector Autoregressive Model (VAR has been put forward to forecast the future structure. Through the research of policy review and scenario analysis, the paths and directions of structure optimization are proposed. In this paper, the system dynamics, vector autoregressive model (VAR, policy mining, and scenario analysis methods are combined to systematically demonstrate the evolution of China’s power structure, and predict the future direction of development. This research may provide a methodological and practical reference for the analysis of China’s power supply structure optimization development and for theoretical studies.

Should developing countries take on binding commitments in a climate agreement? A cost-benefit analysis

International Nuclear Information System (INIS)

Kallbekken, Steffen; Westskog, Hege

2003-01-01

This paper explores the costs and benefits for all parties to a future climate agreement of developing countries taking on binding commitments. Such commitments would allow developing countries to participate in emissions trading, which has significantly lower transaction costs than the present Clean Development Mechanism (CDM). Thus we analyse whether the efficiency gains obtained by participating in emissions trading can offset the economic risk (due to the fact that future emissions cannot be known) incurred by taking on binding commitments. We use a dynamic computable general equilibrium model to carry out the analysis. We find that the efficiency gains that can be obtained by developing countries might not be very large compared to the risks they incur. Developing countries might therefore have good reasons not to embrace ''cap and trade'' emissions trading. (author)

Technical development of nuclear air cleaning in the People's Republic of China

International Nuclear Information System (INIS)

Li Xue Qun; Liu Hui; Wang Tie Shen; Xin Song Niam; Guo Liang Tian.

1985-01-01

In the past 20 years, with the utilization of nuclear technology in China, air cleaning techniques were developed to prevent the environment from pollution caused by radioactive materials and to ensure the safety of occupational personnel. The technical developments involve many fields including the manufacture of filter media and adsorbents; the application of filters and iodine adsorbers and the testing of them; the improvement of instruments and methods for aerosol concentration measurement; the retention of radioactive noble gases; and others. As nuclear power stations are to be built in China, nuclear air cleaning will be advancing more rapidly. Many programs have been scheduled, such as producing other types of adsorbers, moisture separators, nuclear grade HEPA filters that have excellent performance to resist adverse circumstances, and in-place testing for units of ventilation systems in nuclear facilities. These programs are discussed

Clean Energy Progress Report

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

For the past several years, the IEA and others have been calling for a clean energy revolution to achieve global energy security, economic growth and climate change goals. This report analyses for the first time progress in global clean energy technology deployment against the pathways that are needed to achieve these goals. It provides an overview of technology deployment status, key policy developments and public spending on RDD&D of clean energy technologies.

Automated cleaning of electronic components

International Nuclear Information System (INIS)

Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

1994-01-01

Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations

Catalyzing Gender Equality-Focused Clean Energy Development in West Africa

Energy Technology Data Exchange (ETDEWEB)

2016-06-01

The Economic Community of West African States (ECOWAS) Regional Center for Renewable Energy and Energy Efficiency (ECREEE) partnered with the Clean Energy Solutions Center (Solutions Center), the African Development Bank and other institutions to develop a Situation Analysis of Energy and Gender Issues in ECOWAS Member States. Through a systematic approach to assess interlinked gender and energy issues in the region, the report puts forth a number of key findings. This brochure highlights ECREEE's partnership with the Solutions Center and key findings from the report.

Cleaning verification: A five parameter study of a Total Organic Carbon method development and validation for the cleaning assessment of residual detergents in manufacturing equipment.

Science.gov (United States)

Li, Xue; Ahmad, Imad A Haidar; Tam, James; Wang, Yan; Dao, Gina; Blasko, Andrei

2018-02-05

A Total Organic Carbon (TOC) based analytical method to quantitate trace residues of clean-in-place (CIP) detergents CIP100 ® and CIP200 ® on the surfaces of pharmaceutical manufacturing equipment was developed and validated. Five factors affecting the development and validation of the method were identified: diluent composition, diluent volume, extraction method, location for TOC sample preparation, and oxidant flow rate. Key experimental parameters were optimized to minimize contamination and to improve the sensitivity, recovery, and reliability of the method. The optimized concentration of the phosphoric acid in the swabbing solution was 0.05M, and the optimal volume of the sample solution was 30mL. The swab extraction method was 1min sonication. The use of a clean room, as compared to an isolated lab environment, was not required for method validation. The method was demonstrated to be linear with a correlation coefficient (R) of 0.9999. The average recoveries from stainless steel surfaces at multiple spike levels were >90%. The repeatability and intermediate precision results were ≤5% across the 2.2-6.6ppm range (50-150% of the target maximum carry over, MACO, limit). The method was also shown to be sensitive with a detection limit (DL) of 38ppb and a quantitation limit (QL) of 114ppb. The method validation demonstrated that the developed method is suitable for its intended use. The methodology developed in this study is generally applicable to the cleaning verification of any organic detergents used for the cleaning of pharmaceutical manufacturing equipment made of electropolished stainless steel material. Copyright © 2017 Elsevier B.V. All rights reserved.

Magnetized $\\Lambda$CDM inhomogeneities and the cosmic dark ages

CERN Document Server

Giovannini, Massimo

2011-01-01

Exact solutions of the perturbations equations in the magnetized LambdaCDM scenario are presented. They apply during the dark ages and, more specifically, after the baryons are freed from the drag of the photons. The magnetized growth rate of matter perturbations is compared with the growth index obtained in the concordance paradigm and under the assumption that dark energy does not cluster for a redshift window ranging from the epoch of reionization to the stage of dark-energy dominance. The constraints derived from this analysis are shown to be qualitatively complementary and quantitatively competitive with the bounds stemming from the analysis of the distortion patterns induced by the magnetized adiabatic mode on the temperature and polarization anisotropies of the Cosmic Microwave Background.

Clean Energy Infrastructure Educational Initiative

Energy Technology Data Exchange (ETDEWEB)

Hallinan, Kevin; Menart, James; Gilbert, Robert

2012-08-31

The Clean Energy Infrastructure Educational Initiative represents a collaborative effort by the University of Dayton, Wright State University and Sinclair Community College. This effort above all aimed to establish energy related programs at each of the universities while also providing outreach to the local, state-wide, and national communities. At the University of Dayton, the grant has aimed at: solidfying a newly created Master's program in Renewable and Clean Energy; helping to establish and staff a regional sustainability organization for SW Ohio. As well, as the prime grantee, the University of Dayton was responsible for insuring curricular sharing between WSU and the University of Dayton. Finally, the grant, through its support of graduate students, and through cooperation with the largest utilities in SW Ohio enabled a region-wide evaluation of over 10,000 commercial building buildings in order to identify the priority buildings in the region for energy reduction. In each, the grant has achieved success. The main focus of Wright State was to continue the development of graduate education in renewable and clean energy. Wright State has done this in a number of ways. First and foremost this was done by continuing the development of the new Renewable and Clean Energy Master's Degree program at Wright State . Development tasks included: continuing development of courses for the Renewable and Clean Energy Master's Degree, increasing the student enrollment, and increasing renewable and clean energy research work. The grant has enabled development and/or improvement of 7 courses. Collectively, the University of Dayton and WSU offer perhaps the most comprehensive list of courses in the renewable and clean energy area in the country. Because of this development, enrollment at WSU has increased from 4 students to 23. Secondly, the grant has helped to support student research aimed in the renewable and clean energy program. The grant helped to solidify

Clean room actuators

Energy Technology Data Exchange (ETDEWEB)

Higuchi, Toshiro

1987-06-01

This report explains on the present status of the clean room actuators including the author's research results. In a clean room, there exists a possibility of dust generation, even when a direct human work is eliminated by the use of robots or automatic machines, from the machines themselves. For this, it is important to develop such clean robots and transfer/positioning mechanism that do not generate dusts, and to develop an actuator and its control technique. Topics described in the report are as follows: 1. Prevention of dust diffusion by means of sealing. 2. Elimination of mechanical contact (Linear induction motor and pneumatic float, linear motor and magnetic attraction float, linear motor and air bearing, and magnetic bearing). 3. Contactless actuator having a positioning mechanism (Use of linear step motor and rotary contactless actuator). (15 figs, 11 refs)

Did CDM particles of mass 2.47 x 10(-3) eV interact with precursor biopolymers and nucleic acids to initiate and boost lifeforms on Earth?

Science.gov (United States)

Rosen, Gerald

2011-06-01

Recent observations and theoretical studies have shown that non-baryonic Cold Dark Matter (CDM), which constitutes about 84% of all matter in the Universe, may feature a complex-scalar-field that carries particles of mass ≅ 2.47 x 10(-3)eV with the associated Compton range m(-1) ≅8.02 x 10(-3) cm, a distance on the scale of extended bionucleic acids and living cells. Such a complex-scalar-field can enter a weak-isospin Lorentz-invariant interaction that generates the flow of right-handed electrons and induces a chirality-imbued quantum chemistry on the m (-1) scale. A phenomenological Volterra-type equation is proposed for the CDM-impacted time development of N, the number of base pairs in the most advanced organism at Earth-age t. The solution to this equation suggests that the boosts in N at t ≅ 1.1 Gyr (advent of the first living prokaryotic cells), at t ≅ 2.9 Gyr (advent of eukaryotic single-celled organisms) and finally at t ≅ 4.0 Gyr (the Cambrian explosion) may be associated with three multi-Myr-duration cosmic showers of the complex-scalar-field CDM particles. If so, the signature of the particles may be detectible in Cambrian rocks.

Correlating Cleaning Thoroughness with Effectiveness and Briefly Intervening to Affect Cleaning Outcomes: How Clean Is Cleaned?

Directory of Open Access Journals (Sweden)

Robert Clifford

Full Text Available The most efficient approach to monitoring and improving cleaning outcomes remains unresolved. We sought to extend the findings of a previous study by determining whether cleaning thoroughness (dye removal correlates with cleaning efficacy (absence of molecular or cultivable biomaterial and whether one brief educational intervention improves cleaning outcomes.Before-after trial.Newly built community hospital.90 minute training refresher with surface-specific performance results.Dye removal, measured by fluorescence, and biomaterial removal and acquisition, measured with culture and culture-independent PCR-based assays, were clandestinely assessed for eight consecutive months. At this midpoint, results were presented to the cleaning staff (intervention and assessments continued for another eight consecutive months.1273 surfaces were sampled before and after terminal room cleaning. In the short-term, dye removal increased from 40.3% to 50.0% (not significant. For the entire study period, dye removal also improved but not significantly. After the intervention, the number of rooms testing positive for specific pathogenic species by culturing decreased from 55.6% to 36.6% (not significant, and those testing positive by PCR fell from 80.6% to 53.7% (P = 0.016. For nonspecific biomaterial on surfaces: a removal of cultivable Gram-negatives (GN trended toward improvement (P = 0.056; b removal of any cultivable growth was unchanged but acquisition (detection of biomaterial on post-cleaned surfaces that were contaminant-free before cleaning worsened (P = 0.017; c removal of PCR-based detection of bacterial DNA improved (P = 0.046, but acquisition worsened (P = 0.003; d cleaning thoroughness and efficacy were not correlated.At this facility, a minor intervention or minimally more aggressive cleaning may reduce pathogen-specific contamination, but not without unintended consequences.

Trading biomass or GHG emission credits?

NARCIS (Netherlands)

Laurijssen, J; Faaij, A.P.C.

2009-01-01

Global biomass potentials are considerable but unequally distributed over the world. Countries with Kyoto targets could import biomass to substitute for fossil fuels or invest in bio-energy projects in the country of biomass origin and buy the credits (Clean Development Mechanism (CDM) and Joint

DISCOVERY OF A SUPERCLUSTER AT z ∼ 0.91 AND TESTING THE ΛCDM COSMOLOGICAL MODEL

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae-Woo; Im, Myungshin; Lee, Seong-Kook; Hyun, Minhee; Kim, Dohyeong; Choi, Changsu; Hong, Jueun; Kim, Yongjung; Taak, Yoon Chan; Yoon, Yongmin [Center for the Exploration of the Origin of the universe, Department of Physics and Astronomy, Seoul National University, Seoul 151-742 (Korea, Republic of); Edge, Alastair C. [Department of Physics, University of Durham, South Road, Durham DH1 3LE (United Kingdom); Jeon, Yiseul; Jun, Hyunsung David; Karouzos, Marios; Kim, Duho [Astronomy Program, FPRD, Department of Physics and Astronomy, Seoul National University, Seoul 151-742 (Korea, Republic of); Kim, Ji Hoon [Subaru Telescope, National Astronomical Observatory of Japan, 650 North A’ohoku Place, Hilo, HI 96720 (United States); Park, Won-Kee, E-mail: kjw0704@gmail.com, E-mail: mim@astro.snu.ac.kr [Korea Astronomy and Space Science Institute, Daejeon 305-348 (Korea, Republic of)

2016-04-10

The ΛCDM cosmological model successfully reproduces many aspects of the galaxy and structure formation of the universe. However, the growth of large-scale structures (LSSs) in the early universe is not well tested yet with observational data. Here, we have utilized wide and deep optical–near-infrared data in order to search for distant galaxy clusters and superclusters (0.8 < z < 1.2). From the spectroscopic observation with the Inamori Magellan Areal Camera and Spectrograph (IMACS) on the Magellan telescope, three massive clusters at z ∼ 0.91 are confirmed in the SSA22 field. Interestingly, all of them have similar redshifts within Δ z ∼ 0.01 with velocity dispersions ranging from 470 to 1300 km s{sup −1}. Moreover, as the maximum separation is ∼15 Mpc, they compose a supercluster at z ∼ 0.91, meaning that this is one of the most massive superclusters at this redshift to date. The galaxy density map implies that the confirmed clusters are embedded in a larger structure stretching over ∼100 Mpc. ΛCDM models predict about one supercluster like this in our surveyed volume, consistent with our finding so far. However, there are more supercluster candidates in this field, suggesting that additional studies are required to determine if the ΛCDM cosmological model can successfully reproduce the LSSs at high redshift.

Clean cars

Energy Technology Data Exchange (ETDEWEB)

Piffaretti, M.

2008-07-01

This well-illustrated presentation made at the Swiss 2008 research conference on traffic by the Protoscar company takes a look at research, design, engineering and communication topics in the area of 'clean cars'. The present situation with electrically driven and hybrid-drive cars is reviewed and the chances and problems of the present-day vehicles are examined. New developments and a number of vehicles that should be on the market in the period from 2012 to 2015 are presented. Also, 'clean' specialist vehicles such as trucks and buses are reviewed. Battery systems and associated problems and new developments are looked at. The promotion scheme in Mendrisio, Switzerland is reviewed. Bottom-up and top-down approaches are discussed and future market developments are looked at, as are promotional activities in various countries.

Development of durable self-cleaning coatings using organic–inorganic hybrid sol–gel method

Energy Technology Data Exchange (ETDEWEB)

Kumar, Divya [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Wu, Xinghua [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Energy Research Institute at NTU - ERI@N, 1 CleanTech Loop, #06-04, CleanTech One, Singapore 637141 (Singapore); Fu, Qitao [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Ho, Jeffrey Weng Chye [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Energy Research Institute at NTU - ERI@N, 1 CleanTech Loop, #06-04, CleanTech One, Singapore 637141 (Singapore); Kanhere, Pushkar D. [Energy Research Institute at NTU - ERI@N, 1 CleanTech Loop, #06-04, CleanTech One, Singapore 637141 (Singapore); Li, Lin [School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Chen, Zhong, E-mail: ASZChen@ntu.edu.sg [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Energy Research Institute at NTU - ERI@N, 1 CleanTech Loop, #06-04, CleanTech One, Singapore 637141 (Singapore)

2015-07-30

show the best self-cleaning performance both before and after mechanical abrasion. The developed coating process is simple and can be easily scaled-up for large surfaces that require self-cleaning function.

Dry-cleaning of graphene

International Nuclear Information System (INIS)

Algara-Siller, Gerardo; Lehtinen, Ossi; Kaiser, Ute; Turchanin, Andrey

2014-01-01

Studies of the structural and electronic properties of graphene in its pristine state are hindered by hydrocarbon contamination on the surfaces. Also, in many applications, contamination reduces the performance of graphene. Contamination is introduced during sample preparation and is adsorbed also directly from air. Here, we report on the development of a simple dry-cleaning method for producing large atomically clean areas in free-standing graphene. The cleanness of graphene is proven using aberration-corrected high-resolution transmission electron microscopy and electron spectroscopy

Dry-cleaning of graphene

Energy Technology Data Exchange (ETDEWEB)

Algara-Siller, Gerardo [Central Facility for Electron Microscopy, Group of Electron Microscopy of Materials Science, Ulm University, Albert-Einstein-Allee 11, Ulm 89081 (Germany); Department of Chemistry, Technical University Ilmenau, Weimarer Strasse 25, Ilmenau 98693 (Germany); Lehtinen, Ossi; Kaiser, Ute, E-mail: ute.kaiser@uni-ulm.de [Central Facility for Electron Microscopy, Group of Electron Microscopy of Materials Science, Ulm University, Albert-Einstein-Allee 11, Ulm 89081 (Germany); Turchanin, Andrey [Faculty of Physics, University of Bielefeld, Universitätsstr. 25, Bielefeld 33615 (Germany)

2014-04-14

Studies of the structural and electronic properties of graphene in its pristine state are hindered by hydrocarbon contamination on the surfaces. Also, in many applications, contamination reduces the performance of graphene. Contamination is introduced during sample preparation and is adsorbed also directly from air. Here, we report on the development of a simple dry-cleaning method for producing large atomically clean areas in free-standing graphene. The cleanness of graphene is proven using aberration-corrected high-resolution transmission electron microscopy and electron spectroscopy.

Summary report of the Banff clean energy dialogue : towards a truly Canadian clean energy strategy

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

A clean energy strategy will allow Canada to seize opportunities for prosperity in a low-carbon future, while also contributing to the country's economic growth. This report outlined the conclusions drawn by representatives of major energy corporations and policy-makers who gathered to discuss Canada's clean energy plans for the future. Attendants at the meeting concluded that energy conservation and energy efficiency will play a prominent role in a successful clean energy strategy. However, a price on carbon is needed to emphasize the fundamental relationship between energy and the environment. A successful strategy will feature the following 4 overarching principles: (1) economic opportunity, (2) social responsibility, (3) environmental stewardship, and (4) international strategy in relation to trade and development of new markets. The role that federal, provincial and municipal governments will play in developing and implementing the strategy was also presented. The meeting was divided into the following 6 working sessions: (1) global context for a clean energy strategy, (2) why a Canadian clean energy strategy? Why now?, (3) key pillars of a Canadian clean energy strategy, (4) key building blocks of a national clean energy strategy, (5) a balanced Canadian framework, and (6) next steps. 1 fig.

Financing clean energy market creation. Clean energy ventures, venture capitalists and other investors

Energy Technology Data Exchange (ETDEWEB)

Teppo, T. [Helsinki Univ. of Technology, Espoo (Finland). Development and Management in Industry

2006-07-01

Many factors have emerged for change towards cleaner and more efficient technologies and services: climate change, increasing oil demands, and rising living standards in many parts of the world are putting an ever-increasing strain on the environment. Recently, these drivers have fueled the formation of a clean energy venture capital market where both independent venture capitalists (VCs) and corporate venture capitalists (CVCs) have invested in clean energy start-ups. Financing of clean energy market creation is the focus of this dissertation. The dissertation contributes to several bodies of literature in the area of entrepreneurship, new industry creation, corporate venturing, and venture capital research. The dissertation uses a grounded theory approach. The study is guided by three data collection approaches with an emphasis on the first two. First, interviews with European and North American VC and CVC firms that have invested in the clean energy sector were carried out. Second, a clean energy venture financing survey that consisted of qualitative, essay-format questions and some quantitative questions was carried out. Third, interviews with clean energy stakeholders were carried out in order to gain a better understanding of the emerging sector. The research results consist of three main findings. First, the research results suggest that clean energy ventures face the following three main entrepreneurial challenges: financing, market education, and growth management. A further study of three clean energy industry categories revealed additional challenges that varied according to the industry development stage. Second, the results demonstrate that, from a venture capitalist perspective, clean energy venture risk characteristics can be divided into two groups: generally recognized risk characteristics and cognitive risk characteristics. The identified generally recognized risk characteristics were market demand and adaptation, incompatibility with the VC model

Constructing carbon offsets: The obstacles to quantifying emission reductions

International Nuclear Information System (INIS)

Millard-Ball, Adam; Ortolano, Leonard

2010-01-01

The existing literature generally ascribes the virtual absence of the transport sector from the Clean Development Mechanism (CDM) to the inherent complexity of quantifying emission reductions from mobile sources. We use archival analysis and interviews with CDM decision-makers and experts to identify two additional groups of explanations. First, we show the significance of aspects of the CDM's historical evolution, such as the order in which methodologies were considered and the assignment of expert desk reviewers. Second, we highlight inconsistencies in the treatment of uncertainty across sectors. In contrast to transport methodologies, other sectors are characterized by a narrow focus on sources of measurement uncertainty and a neglect of economic effects ('market leakages'). We do not argue that the rejection of transport methodologies was unjustified, but rather than many of the same problems are inherent in other sectors. Thus, the case of transport sheds light on fundamental problems in quantifying emission reductions under the CDM. We argue that a key theoretical attraction of the CDM-equalization of marginal abatement costs across all sectors-has been difficult to achieve in practice.

Report on basic survey project for promoting joint implementation in 1999. Feasibility studies on reduction of CO2 emission by introduction of energy saving equipment in 3 major Philippine pulp and paper mills

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility studies were carried out on major Philippine pulp and paper mills to introduce energy saving technologies possessed by Japan and reduce emission of greenhouse effect gases. The studies are intended to be linked to the clean development mechanism (CDM) in the future. The factories chosen as the object of the studies are TIPCO, UPPC and CCP. The energy saving facilities to be introduced are the energy saving type screen, speed variable motors, power regenerative braking of winder roll-out section, installation of a dryer roll spoiler bar, and waste heat recovering devices. Therefore, it is necessary that Japan accept sharing the fund in return that this project is performed as a CDM, and credit on reduction of CO2 emission is transferred. Because of indistinctness in the CDM framework at the present as to the specific ratio of fund sharing, and of the value of the reduction quantity credit, further discussions will be required after these situations have been made clear. Since the Philippine government is not favorably disposed toward the CDM, agreement on this project as a CDM appears difficult. (NEDO)

Navigating the global carbon market

International Nuclear Information System (INIS)

Schneider, Malte; Hendrichs, Holger; Hoffmann, Volker H.

2010-01-01

From a slow start, the clean development mechanism (CDM) market has recently experienced enormous growth. However, the CDM market has been increasingly criticised, resulting in a lively debate about how to reform, complement, or replace it. In order to increase transparency and assist policy-makers in better understanding the current market, we depart from the traditional project-level perspective on CDM and analyse commercial activities by utilising data from UNEP Risoe's CDM Bazaar. To this end, we first establish a seven-step value chain by conducting a factor analysis on the commercial activities indicated in the Bazaar and, second, identify nine prevalent business models with a cluster analysis of all 495 participating organisations. Based on these analyses, we discuss potential impacts on the value chain of different policy scenarios that rely on carbon credits as incentive. We find that the importance of specific regulatory CDM know-how and general business activities such as finance varies strongly with the different policy scenarios. Our analysis serves to sensitise policy-makers and business about implications of different regulatory designs.

Community Based Forest Management as a Climate Strategy (with carbon as a non-timber forest product)

NARCIS (Netherlands)

Skutsch, Margaret

2003-01-01

Under the Kyoto Protocol, forestry is permitted as a sink measure under the Clean Development Mechanism (CDM), but only in the form of ‘afforestation’ and ‘reforestation’. These tend to involve large-scale plantation systems, which although cost effective in terms of carbon sequestered, in most

Intra- and extra-union flexibility in meeting the European union's emission reduction targets

NARCIS (Netherlands)

Tol, R.S.J.

2009-01-01

The EU has proposed four flexibility mechanisms for the regulation of greenhouse gas emissions in the period 2013-2020: (1) the Emissions Trade Scheme (ETS), a permit market between selected companies; (2) trade in non-ETS allotments between Member States; (3) the Clean Development Mechanism (CDM)

Development of chemical cleaning formulation for service water system of FBTR

International Nuclear Information System (INIS)

Velmurugan, S.; Narasimhan, S.V.; Das, P.C.; Mathur, P.K.

1995-01-01

Service water system of Fast Breeder Test Reactor (FBTR) was found to be corroded and at few locations, the corrosion product oxides were choking the smaller diameter pipelines. An attempt was made to develop a chemical cleaning formulation to chemically remove the oxides using a surface conditioner and chelating agents. Of the several complexants tested, hydroxyethylethylene diamine tetraacetic acid (HEDTA) was found to be better than other complexants from the point of view of oxide dissolution efficiency, solubility etc. A two stage chemical cleaning process involving conditioning of the oxide layer with 0.1% tannic acid followed by exposure of the conditioned oxide layer with a formulation containing 1% HEDTA + 0.5% Sodium Gluconate +0.2% hexamine was recommended to remove the corrosion product oxide present in the service water system. (author). 4 refs., 2 tabs

CDM pilot project to stimulate market for family-hydro for low-income households

International Nuclear Information System (INIS)

2004-01-01

Over 100,000 low-income households living in rural, rice-farming regions of Vietnam and China rely upon family-hydro (between 100 and 200W) as the only affordable means of obtaining electricity. These systems are used for domestic lighting, radio and, in some cases, televisions. The units are small, cheap and are usually installed and owned by a single family. Funding from the CDM could be utilised in order to reduce the cost of good quality equipment to provide low-income households living in isolated off-grid locations with an affordable and sustainable electricity supply which can meet their needs for lighting, educational, productive and recreational uses. Therefore research was needed to determine the level of carbon emission reductions resulting from their use. The successful acceptance by the Prototype Carbon Fund (PCF) of the methodology of establishing the benchmark developed during this project could then be used as a precedent by other project developers in the future, thus being of long-term support to the emerging family-hydro industry. (author)

Developing technique for waste water cleaning of a division for equipment decontamination

International Nuclear Information System (INIS)

Gromoglasov, A.A.; Solyakov, V.K.; Novikov, V.N.; Pil'shchikov, A.P.; Chekalov, A.G.; Sinyukov, M.A.; Pshenichnykh, V.N.

1989-01-01

Results are described of developing technique for radionuclide cleaning solutions after metal product decontamination. The method is based on the adagulation with usage of quicklime. The conclusion is method permits to consider it as the main technique for waste water decontamination. 3 refs.; 2 figs.; 3 tabs

Pengembangan Sistem Informasi Pemesanan Layanan Jasa Cleaning Service Berbasis Web dan Mobile di Liochita Cleaning Semarang

OpenAIRE

Agung, Aulio Romadho; Kridalukmana, Rinta; Windasari, Ike Pertiwi

2016-01-01

Liochita cleaning is a company engaged in the field of cleaning services which are located in the city of Semarang. Until now, the existing of information systems on Liochita Cleaning were not sufficiently able to manage the company and thus to make this company as a company that developed and developing its field and can compete with other companies is not possible. Start from recording customer data and order data, which is the became one as income data, so this companies are less aware in ...

Hot gas cleaning, a targeted project

Energy Technology Data Exchange (ETDEWEB)

Romey, I. [University of Essen, Essen (Germany)

1998-11-01

Advanced hot gas cleaning systems will play a key role in future integrated combined cycle technologies. IGCC demonstration plants in operation or under construction are at present equipped with conventional wet gas scrubbing and cleaning systems. Feasibility studies for those IGCC plants have shown that the total efficiency of the processes can be improved using hot gas cleaning systems. However, this technology has not been developed and tested at a technical scale. Six well-known European industrial companies and research centres jointly worked together since January 1996 on a Targeted Project `Hot Gas Cleaning` to investigate and develop new hot gas cleaning systems for advanced clean coal power generation processes. In addition project work on chemical analysis and modelling was carried out in universities in England and Germany. The latest main findings were presented at the workshop. The main project aims are summarised as follows: to increase efficiency of advanced power generation processes; to obtain a reduction of alkalis and environmental emissions e.g. SO{sub 2}, NO{sub x}, CO{sub 2} and dust; and to develop the design basis for future industrial plants based on long-term operation of laboratory, pilot and demo-plants. To cover a range of possible process routes for future hot gas cleaning systems the following research programme is under investigation: removal of trace elements by different commercial and self developed sorbents; gas separation by membranes; separation of gas turbine relevant pollutants by hot filter dust and; H{sub 2}S removal and gas dedusting at high temperatures. 13 figs.

Tracking Clean Energy Progress 2013

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-06-01

Tracking Clean Energy Progress 2013 (TCEP 2013) examines progress in the development and deployment of key clean energy technologies. Each technology and sector is tracked against interim 2020 targets in the IEA Energy Technology Perspectives 2012 2°C scenario, which lays out pathways to a sustainable energy system in 2050. Stark message emerge: progress has not been fast enough; large market failures are preventing clean energy solutions from being taken up; considerable energy efficiency remains untapped; policies need to better address the energy system as a whole; and energy-related research, development and demonstration need to accelerate. Alongside these grim conclusions there is positive news. In 2012, hybrid-electric vehicle sales passed the 1 million mark. Solar photovoltaic systems were being installed at a record pace. The costs of most clean energy technologies fell more rapidly than anticipated.

La abundancia de galaxias y halos de materia oscura en el universo CDM

Science.gov (United States)

Abadi, M. G.; Benítez-Llambay, A.; Ferrero, I.

A long-standing puzzle of CDM cosmological model concerns to the different shape of the galaxy stellar mass function and the halo mass function on dwarf galaxy scales. Dwarf galaxies are much less numerous than halos massive enough to host them; suggesting a complex non-linear relation between the mass of a galaxy and the mass of its surrounding halo. Usually; this is reconciled by appealing to baryonic processes that can reduce the efficiency of galaxy formation in low-mass halos. Recent work applying the abundance matching technique require that virtually no dwarf galaxies form in halos with virial mass below . We use rotation curves of dwarf galaxies compiled from the literature to explore whether their total enclosed mass is consistent with these constraints. Almost one-half of the dwarfs in our sample are at odds with this restriction; they are in halos with masses substantially below . Using a cosmological simulation of the formation of the Local Group of galaxies we found that ram-pressure stripping against the cosmic web removes baryons from low-mass halos without appealing to feedback or reionization. This mechanism may help to explain the scarcity of dwarf galaxies compared with the numerous low-mass halos expected in CDM and the large diversity of star formation histories and morphologies characteristic of faint galaxies. FULL TEXT IN SPANISH

DEVELOPMENT OF AN INSOLUBLE SALT SIMULANT TO SUPPORT ENHANCED CHEMICAL CLEANING TESTS

International Nuclear Information System (INIS)

Eibling, R

2008-01-01

The closure process for high level waste tanks at the Savannah River Site will require dissolution of the crystallized salts that are currently stored in many of the tanks. The insoluble residue from salt dissolution is planned to be removed by an Enhanced Chemical Cleaning (ECC) process. Development of a chemical cleaning process requires an insoluble salt simulant to support evaluation tests of different cleaning methods. The Process Science and Engineering section of SRNL has been asked to develop an insoluble salt simulant for use in testing potential ECC processes (HLE-TTR-2007-017). An insoluble salt simulant has been developed based upon the residues from salt dissolution of saltcake core samples from Tank 28F. The simulant was developed for use in testing SRS waste tank chemical cleaning methods. Based on the results of the simulant development process, the following observations were developed: (1) A composition based on the presence of 10.35 grams oxalate and 4.68 grams carbonate per 100 grams solids produces a sufficiently insoluble solids simulant. (2) Aluminum observed in the solids remaining from actual waste salt dissolution tests is probably precipitated from sodium aluminate due to the low hydroxide content of the saltcake. (3) In-situ generation of aluminum hydroxide (by use of aluminate as the Al source) appears to trap additional salts in the simulant in a manner similar to that expected for actual waste samples. (4) Alternative compositions are possible with higher oxalate levels and lower carbonate levels. (5) The maximum oxalate level is limited by the required Na content of the insoluble solids. (6) Periodic mixing may help to limit crystal growth in this type of salt simulant. (7) Long term storage of an insoluble salt simulant is likely to produce a material that can not be easily removed from the storage container. Production of a relatively fresh simulant is best if pumping the simulant is necessary for testing purposes. The insoluble

Development of the ultra-clean dry cleanup process for coal-based syngases: pilot-scale evaluation

Energy Technology Data Exchange (ETDEWEB)

R.B. Slimane; P.V. Bush; J.L. Aderhold, Jr.; B.G. Bryan; R.A. Newby; D. A. Horazak; S.C. Jain [Gas Technology Institute, Des Plaines, IL (United States)

2005-07-01

This paper reports on a recent successful pilot-scale evaluation of the Ultra-Clean Process performance at a 10-ton/day coal gasifier facility. In these tests, carbonaceous feedstocks were gasified, using GTI's fluidized bed U-GAS{reg_sign} gasification technology, to generate syngas. The raw syngas was then conditioned and fed to the UCP test section for deep cleaning to meet very stringent cleaning requirements for chemical feedstocks or liquid-fuel synthesis applications, or for fuel-cell power generation. Fine particle sorbents for sulfur, halide, and mercury removal were injected into the syngas upstream of two stages of particulate controlled devices, 'barrier filter-reactors', coupling efficient particle capture with an effective entrained and filter cake reaction environment for very effective multiple contaminant removal. The goal of the test program was to confirm sorbent selection, filter-reactor operating parameters and sorbent-to-contaminant ratios, which were previously determined in the laboratory to have potential to reduce contaminant concentrations to very low levels. The pilot-scale data developed are being used to update conceptual evaluations, which have shown the technical feasibility, cost effectiveness and commercial merit for the Ultra-Clean Process compared to conventional, Rectisol-based syngas cleaning. 10 refs., 5 figs.

Development of contaminated concrete removing system 'Clean cut method'

International Nuclear Information System (INIS)

Kinoshita, Takehiko; Tanaka, Tsutomu; Funakawa, Naoyoshi; Idemura, Hajime; Sakashita, Fumio; Tajitsu, Yoshiteru

1989-01-01

In the case of decommissioning nuclear facilities such as nuclear power stations, nuclear fuel facilities and RI handling facilities and carrying out reconstruction works, if there is radioactive contamination on the surfaces of concrete structures such as the floors and walls of the buildings for nuclear facilities, it must be removed. Since concrete is porous, contamination infiltrates into the inside of concrete, and the wiping of surfaces only or chemical decontamination cannot remove it, therefore in most cases, contaminated concrete must be removed. The removal of concrete surfaces has been carried out with chipping hammers, grinders and so on, but many problems arise due to it. In order to solve these problems, the mechanical cutting method was newly devised, and clean cut method (CCRS) was completed. The depth of cutting from concrete surface is set beforehand, and the part to be removed is accurately cut, at the same time, the concrete powder generated is collected nearly perfectly, and recovered into a drum. The outline of the method and the constitution of the system, the features of the clean cut method, the development of the technology for cutting concrete and the technology for recovering concrete powder, and the test of verifying decontamination are reported. (K.I.)

Next steps in the development of ecological soil clean-up values for metals.

Science.gov (United States)

Wentsel, Randall; Fairbrother, Anne

2014-07-01

This special series in Integrated Environmental Assessment Management presents the results from 6 workgroups that were formed at the workshop on Ecological Soil Levels-Next Steps in the Development of Metal Clean-Up Values (17-21 September 2012, Sundance, Utah). This introductory article presents an overview of the issues assessors face when conducting risk assessments for metals in soils, key US Environmental Protection Agency (USEPA) documents on metals risk assessment, and discusses the importance of leveraging from recent major terrestrial research projects, primarily to address Registration, Evaluation, Authorization and Restriction of Chemical Substances (REACH) requirements in Europe, that have significantly advanced our understanding of the behavior and toxicity of metals in soils. These projects developed large data sets that are useful for the risk assessment of metals in soil environments. The workshop attendees met to work toward developing a process for establishing ecological soil clean-up values (Eco-SCVs). The goal of the workshop was to progress from ecological soil screening values (Eco-SSLs) to final clean-up values by providing regulators with the methods and processes to incorporate bioavailability, normalize toxicity thresholds, address food-web issues, and incorporate background concentrations. The REACH data sets were used by workshop participants as case studies in the development of the ecological standards for soils. The workshop attendees discussed scientific advancements in bioavailability, soil biota and wildlife case studies, soil processes, and food-chain modeling. In addition, one of the workgroups discussed the processes needed to frame the topics to gain regulatory acceptance as a directive or guidance by Canada, the USEPA, or the United States. © 2013 SETAC.

Northwest Region Clean Energy Application Center

Energy Technology Data Exchange (ETDEWEB)

Sjoding, David [Washington State Univ., Pullman, WA (United States)

2013-09-30

The main objective of the Northwest Clean Energy Application Center (NW CEAC) is to promote and support implementation of clean energy technologies. These technologies include combined heat and power (CHP), district energy, waste heat recovery with a primary focus on waste heat to power, and other related clean energy systems such as stationary fuel cell CHP systems. The northwest states include AK, ID, MT, OR, and WA. The key aim/outcome of the Center is to promote and support implementation of clean energy projects. Implemented projects result in a number of benefits including increased energy efficiency, renewable energy development (when using opportunity fuels), reduced carbon emissions, improved facility economics helping to preserve jobs, and reduced criteria pollutants calculated on an output-based emissions basis. Specific objectives performed by the NW CEAC fall within the following five broad promotion and support categories: 1) Center management and planning including database support; 2) Education and Outreach including plan development, website, target market workshops, and education/outreach materials development 3) Identification and provision of screening assessments & feasibility studies as funded by the facility or occasionally further support of Potential High Impact Projects; 4) Project implementation assistance/trouble shooting; and 5) Development of a supportive clean energy policy and initiative/financing framework.

Optimization of Ultrasonic Fabric Cleaning

Energy Technology Data Exchange (ETDEWEB)

Hand, T.E.

1998-05-13

The fundamental purpose of this project was to research and develop a process that would reduce the cost and improve the environmental efficiency of the present dry-cleaning industry. This second phase of research (see report KCP-94-1006 for information gathered during the first phase) was intended to allow the optimal integration of all factors of ultrasonic fabric cleaning. For this phase, Garment Care performed an extensive literature search and gathered data from other researchers worldwide. The Garment Care-AlliedSignal team developed the requirements for a prototype cleaning tank for studies and acquired that tank and the additional equipment required to use it properly. Garment Care and AlliedSignal acquired the transducers and generators from Surftran Martin-Walter in Sterling Heights, Michigan. Amway's Kelly Haley developed the test protocol, supplied hundreds of test swatches, gathered the data on the swatches before and after the tests, assisted with the cleaning tests, and prepared the final analysis of the results. AlliedSignal personnel, in conjunction with Amway and Garment Care staff, performed all the tests. Additional planning is under way for future testing by outside research facilities. The final results indicated repeatable performance and good results for single layered fabric swatches. Swatches that were cleaned as a ''sandwich,'' that is, three or more layers.

Human rights and the new sustainable mechanism of the Paris ...

African Journals Online (AJOL)

Looking back at the experience of the Clean Development Mechanism (CDM) of the Kyoto Protocol, which bears great resemblance to the SDM, as well as to the human rights concerns raised during its implementation, the integration of human rights considerations into the SDM and its governing rules seems to be ...

The African example. The clean development mechanism confronted to the African priorities

International Nuclear Information System (INIS)

Dessus, B.; Thomas, J.Ph.; Tillerson, K.

1999-01-01

The Kyoto protocol has given the bases of a clean development mechanism devoted to finance actions of a sparing with greenhouse gases emissions development, in the South countries, to receive in exchange credit of emission for the north countries in order to allow to reach their objective of emission reduction. The programming and the start-up of a such mechanism supposes the confrontation of development priorities of concerned countries with these ones of the fight against the greenhouse gases emissions in these same countries. (N.C.)

Introduction: exploring and explaining the Asia-Pacific Partnership on Clean Development and Climate

NARCIS (Netherlands)

Karlsson-Vinkhuyzen, S. I.; van Asselt, H.D.

2009-01-01

This introduction lays the groundwork for this Special Issue by providing an overview of the Asia-Pacific Partnership on Clean Development and Climate (APP), and by introducing three main analytical themes. The first theme concerns the emergence and continuation of the APP. The contributions show

Pengembangan Sistem Informasi Pemesanan Layanan Jasa Cleaning Service Berbasis Web Dan Mobile Di Liochita Cleaning Semarang

Directory of Open Access Journals (Sweden)

Aulio Romadho Agung

2016-01-01

Full Text Available Liochita cleaning is a company engaged in the field of cleaning services which are located in the city of Semarang. Until now, the existing of information systems on Liochita Cleaning were not sufficiently able to manage the company and thus to make this company as a company that developed and developing its field and can compete with other companies is not possible. Start from recording customer data and order data, which is the became one as income data, so this companies are less aware in detail of the customer data. On the other hand, customers must make a call in advance to order the services that it requires no small cost. Lack of marketing facilities makes this company unable to include all of costumers in the city of Semarang. Data recording is still using paper, so this company were at risk of paper lost which is containing data that has been recorded . Development of an information system in this study using the method of the waterfall. Waterfall model consists of: requirements, design, implementation, testing and maintenance. For the start of the design, developer need to observations or interviews to determine the needs of the system that being developed. Applications developed using the framework CodeIgniter. The results of this final project is an information system that can meet the needs of Liochita Cleaning in the management of these services, customers and orders in accordance with the business processes that Liochita Cleaning have and allow customers to book services .

A centrifuge CO2 pellet cleaning system

International Nuclear Information System (INIS)

Foster, C.A.; Fisher, P.W.; Nelson, W.D.; Schechter, D.E.

1993-01-01

Centrifuge-based cryogenic pellet accelerator technology, originally developed at Oak Ridge National Laboratory (ORNL) for the purpose of refueling fusion reactors with high-speed pellets of frozen deuterium/tritium,is now being developed as a method of cleaning without the use of conventional solvents. In these applications large quantities of pellets made of frozen CO 2 or argon are accelerated in a high-speed rotor. The accelerated pellet stream is used to clean or etch surfaces. The advantage of this system is that the spent pellets and debris resulting from the cleaning process can be filtered leaving only the debris for disposal. This paper discusses the centrifuge CO 2 pellet cleaning system, the physics model of the pellet impacting the surface, the centrifuge apparatus, and some initial cleaning and etching tests

National Clean Fleets Partnership (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)