WorldWideScience

Sample records for cathedral marble treated

  1. Bacterial and fungal deterioration of the Milan Cathedral marble treated with protective synthetic resins

    International Nuclear Information System (INIS)

    Cappitelli, Francesca; Principi, Pamela; Pedrazzani, Roberta; Toniolo, Lucia; Sorlini, Claudia

    2007-01-01

    Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy). Four stone samples of the Milan Cathedral were chemically analysed and the microbiological growth assessed. X-ray diffraction (XRD) showed that calcite was always present in each sample and one sample was also characterised by the chemical form of alteration gypsum. Using Fourier Transform Infrared Spectroscopy (FTIR) together with Scanning Electron Microscopy (SEM), it was possible to prove that the samples were consolidated with the synthetic acrylics and epoxy resins. The green-black biological patinas of the specimens were studied using cultivation, microscope observations and a method for single-cell detection. Sampling for fluorescent in-situ hybridisation (FISH), with ribosomal RNA targeted oligonucleotide probes, was also performed using adhesive tapes. The bulk of the prokaryotes were Bacteria but some Archaea were also found. The bacterial cells were further characterised using specific probes for Cyanobacteria, and α-, β-and γ-Proteobacteria. In addition, black fungi isolated from the stone and the fungi of the standard ASTM G21-96(2002) method were employed to test if the detected synthetic resins could be used as the sole source of carbon and energy. One isolated Cladosporium sp. attacked the freshly dried acrylic resin. Results show that the detected bacteria and fungi can cause severe damage both to the stone monument and its synthetic consolidants

  2. Bacterial and fungal deterioration of the Milan Cathedral marble treated with protective synthetic resins.

    Science.gov (United States)

    Cappitelli, Francesca; Principi, Pamela; Pedrazzani, Roberta; Toniolo, Lucia; Sorlini, Claudia

    2007-10-15

    Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy). Four stone samples of the Milan Cathedral were chemically analysed and the microbiological growth assessed. X-ray diffraction (XRD) showed that calcite was always present in each sample and one sample was also characterised by the chemical form of alteration gypsum. Using Fourier Transform Infrared Spectroscopy (FTIR) together with Scanning Electron Microscopy (SEM), it was possible to prove that the samples were consolidated with the synthetic acrylics and epoxy resins. The green-black biological patinas of the specimens were studied using cultivation, microscope observations and a method for single-cell detection. Sampling for fluorescent in-situ hybridisation (FISH), with ribosomal RNA targeted oligonucleotide probes, was also performed using adhesive tapes. The bulk of the prokaryotes were Bacteria but some Archaea were also found. The bacterial cells were further characterised using specific probes for Cyanobacteria, and alpha-, beta-and gamma-Proteobacteria. In addition, black fungi isolated from the stone and the fungi of the standard ASTM G21-96(2002) method were employed to test if the detected synthetic resins could be used as the sole source of carbon and energy. One isolated Cladosporium sp. attacked the freshly dried acrylic resin. Results show that the detected bacteria and fungi can cause severe damage both to the stone monument and its synthetic consolidants.

  3. Bacterial and fungal deterioration of the Milan Cathedral marble treated with protective synthetic resins

    Energy Technology Data Exchange (ETDEWEB)

    Cappitelli, Francesca [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy)], E-mail: francesca.cappitelli@unimi.it; Principi, Pamela [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy); Pedrazzani, Roberta [Dipartimento di Ingegneria Meccanica, University of Brescia, Via Branze 38, 25123 Brescia (Italy); Toniolo, Lucia [Dipartimento di Chimica, Materiali e Ingegneria Chimica ' Giulio Natta' , Politecnico di Milano, Via Mancinelli 7, 20133 Milan (Italy); Sorlini, Claudia [Dipartimento di Scienze e Tecnologie Alimentari e Microbiologiche, University of Milan, Via Celoria 2, 20133 Milan (Italy)

    2007-10-15

    Surfaces are continuously exposed to physical, chemical and biological degradation. Among the biological agents that cause deterioration, microorganisms are of critical importance. This work is part of a research programme for the characterisation of the alterations of the Milan Cathedral (Italy). Four stone samples of the Milan Cathedral were chemically analysed and the microbiological growth assessed. X-ray diffraction (XRD) showed that calcite was always present in each sample and one sample was also characterised by the chemical form of alteration gypsum. Using Fourier Transform Infrared Spectroscopy (FTIR) together with Scanning Electron Microscopy (SEM), it was possible to prove that the samples were consolidated with the synthetic acrylics and epoxy resins. The green-black biological patinas of the specimens were studied using cultivation, microscope observations and a method for single-cell detection. Sampling for fluorescent in-situ hybridisation (FISH), with ribosomal RNA targeted oligonucleotide probes, was also performed using adhesive tapes. The bulk of the prokaryotes were Bacteria but some Archaea were also found. The bacterial cells were further characterised using specific probes for Cyanobacteria, and {alpha}-, {beta}-and {gamma}-Proteobacteria. In addition, black fungi isolated from the stone and the fungi of the standard ASTM G21-96(2002) method were employed to test if the detected synthetic resins could be used as the sole source of carbon and energy. One isolated Cladosporium sp. attacked the freshly dried acrylic resin. Results show that the detected bacteria and fungi can cause severe damage both to the stone monument and its synthetic consolidants.

  4. Synthetic Consolidants Attacked by Melanin-Producing Fungi: Case Study of the Biodeterioration of Milan (Italy) Cathedral Marble Treated with Acrylics▿

    Science.gov (United States)

    Cappitelli, Francesca; Nosanchuk, Joshua D.; Casadevall, Arturo; Toniolo, Lucia; Brusetti, Lorenzo; Florio, Sofia; Principi, Pamela; Borin, Sara; Sorlini, Claudia

    2007-01-01

    Monuments and artistic stone surfaces are often consolidated and protected with synthetic polymers, in particular, acrylics. Although it is generally thought that acrylic polymers are resistant to biodeterioration, we report for the first time the systematic occurrence of dematiaceous meristematic fungi on many marble samples of the cathedral in Milan (Italy) previously treated with this material. Fourier transform infrared spectroscopy applied to the Milan cathedral stone samples revealed characteristic features of biodeteriorated synthetic resins that differentiated them from the aged but nonbiodeteriorated samples. Samples showing biological colonization were analyzed for the presence of fungi. Cultivation and morphological characterization and methods independent from cultivation, such as denaturing gradient gel electrophoresis coupled with partial 18S rRNA gene sequencing and immunofluorescence staining with melanin-binding antibodies, showed that melanin-producing species are heavily present on stone surfaces protected with acrylic resins. This observation raises the question of the effectiveness of acrylics in protecting stone artworks. PMID:17071788

  5. Synthetic consolidants attacked by melanin-producing fungi: case study of the biodeterioration of Milan (Italy) cathedral marble treated with acrylics.

    Science.gov (United States)

    Cappitelli, Francesca; Nosanchuk, Joshua D; Casadevall, Arturo; Toniolo, Lucia; Brusetti, Lorenzo; Florio, Sofia; Principi, Pamela; Borin, Sara; Sorlini, Claudia

    2007-01-01

    Monuments and artistic stone surfaces are often consolidated and protected with synthetic polymers, in particular, acrylics. Although it is generally thought that acrylic polymers are resistant to biodeterioration, we report for the first time the systematic occurrence of dematiaceous meristematic fungi on many marble samples of the cathedral in Milan (Italy) previously treated with this material. Fourier transform infrared spectroscopy applied to the Milan cathedral stone samples revealed characteristic features of biodeteriorated synthetic resins that differentiated them from the aged but nonbiodeteriorated samples. Samples showing biological colonization were analyzed for the presence of fungi. Cultivation and morphological characterization and methods independent from cultivation, such as denaturing gradient gel electrophoresis coupled with partial 18S rRNA gene sequencing and immunofluorescence staining with melanin-binding antibodies, showed that melanin-producing species are heavily present on stone surfaces protected with acrylic resins. This observation raises the question of the effectiveness of acrylics in protecting stone artworks.

  6. The protection of different Italian marbles with two partially flourinated acrylic copolymers

    Science.gov (United States)

    Poli, T.; Toniolo, L.; Chiantore, O.

    Committing stone protection to polymeric materials started in the sixties but the study and knowledge of the complex and multiple interactions between stone and polymers has only been carried out recently. It's important to note that, together with the factors related to the polymeric system itself, intrinsic properties of the stone substrate, like composition, porosity, and crystalline characteristics, play a relevant role. In this paper the issues related to protection of three different Italian marbles have been investigated: Candoglia marble, employed in the building of the Milan Cathedral, Carrara marble, widely used in sculpture and historical architecture, and S. Giuliano marble, used in the building of the Pisa Cathedral and its famous leaning tower. Specimens coming from blocks of the three quarried stones have been characterized, treated with two new partially fluorinated acrylic copolymers, 2,2,2-trifluoroethyl methacrylate/methyl acrylate (TFEMA/MA), and trifluoromethyl-2,2,2-trifluorethyl methacrylate/methyl acrylate (HFIMA/MA), and tested according to UNI-Normal Italian protocol. All the measurements including capillary water absorption, static contact angles, colour variation, water vapour permeability, and SEM morphological analysis have been carried out before and after the polymeric treatment. The aim of this work is to evaluate the protective efficacy of these two new partially fluorinated acrylic copolymers on the three different marbles, and to correlate the different behaviours with the polymers' properties and with the stone substrates characteristics.

  7. Consolidation of sugaring marble by hydroxyapatite: some recent developments on producing and treating decayed samples

    OpenAIRE

    Sassoni, Enrico; Graziani, Gabriela; Franzoni, Elisa; Scherer, George W.

    2016-01-01

    Consolidation of sugaring marble (i.e., marble affected by granular disaggregation) still lacks fully effective solutions. Consequently, the use of an innovative phosphate-based treatment, aimed at bonding calcite grains by formation of hydroxyapatite at grain boundaries, has recently been proposed. In this paper, firstly a novel method for producing artificially decayed marble samples, by contact with a heating plate, is proposed. Then, some results are presented about the effectiveness and ...

  8. Amiens and Its Cathedral.

    Science.gov (United States)

    Brinkworth, Peter; Scott, Paul

    1997-01-01

    Introduces a place of mathematics using a town called Amiens and its Cathedral whose overall floor plan was based on the Greek cross using proportions matching that of the ideal human body, the figures in the shape of an octagram or star octagon, and the symbols in the design. (ASK)

  9. Suitability assessment of grey water quality treated with an upflow-downflow siliceous sand/marble waste filtration system for agricultural and industrial purposes.

    Science.gov (United States)

    Chaabane, Safa; Riahi, Khalifa; Hamrouni, Hédi; Thayer, Béchir Ben

    2017-04-01

    The present study examines the suitability assessment of an upflow-downflow siliceous sand/marble waste filtration system for treatment and reuse of grey water collected from bathrooms of the student residential complex at the Higher Institute of Engineering Medjez El Bab (Tunisia). Once the optimization of grey water pre-treatment system has been determined, the filtration system was operated at different hydraulic loading rate and media filter proportions in order to assess the suitability of treated grey water for irrigational purpose according to salinity hazard, sodium hazard, magnesium hazard, permeability index, water infiltration rate, and widely used graphical methods. Suitability of the treated grey water for industrial purpose was evaluated in terms of foaming, corrosion, and scaling. Under optimal operational conditions, results reveals that treated grey water samples with an upflow-downflow siliceous sand/marble waste filtration system may be considered as a good and an excellent water quality suitable for irrigation purpose. However, treated grey water was found not appropriate for industrial purpose due to high concentrations of calcium and sodium that can generate foaming and scaling harm to boilers. These results suggest that treated grey water with an upflow-downflow siliceous sand/marble waste filtration system would support production when used as irrigation water.

  10. Liquid Marbles

    KAUST Repository

    Khalil, Kareem

    2012-12-01

    Granulation, the process of formation of granules from a combination of base powders and binder liquids, has been a subject of research for almost 50 years, studied extensively for its vast applications, primarily to the pharmaceutical industry sector. The principal aim of granulation is to form granules comprised of the active pharmaceutical ingredients (API’s), which have more desirable handling and flowability properties than raw powders. It is also essential to ensure an even distribution of active ingredients within a tablet with the goal of achieving time‐controlled release of drugs. Due to the product‐specific nature of the industry, however, data is largely empirical [1]. For example, the raw powders used can vary in size by two orders of magnitude with narrow or broad size distributions. The physical properties of the binder liquids can also vary significantly depending on the powder properties and required granule size. Some significant progress has been made to better our understanding of the overall granulation process [1] and it is widely accepted that the initial nucleation / wetting stage, when the binder liquid first wets the powders, is key to the whole process. As such, many experimental studies have been conducted in attempt to elucidate the physics of this first stage [1], with two main mechanisms being observed – classified by Ivenson [1] as the “Traditional description” and the “Modern Approach”. See Figure 1 for a graphical definition of these two mechanisms. Recent studies have focused on the latter approach [1] and a new, exciting development in this field is the Liquid Marble. This interesting formation occurs when a liquid droplet interacts with a hydrophobic (or superhydrophobic) powder. The droplet can become encased in the powder, which essentially provides a protective “shell” or “jacket” for the liquid inside [2]. The liquid inside is then isolated from contact with other solids or liquids and has some

  11. The south oculus at Canterbury cathedral

    OpenAIRE

    Filippoupolitis, Marios

    2011-01-01

    Master’s Thesis Structural Analysis of Monuments and Historical Constructions The South Oculus at Canterbury Cathedral is a wrought iron space frame, consisting of two layers (Ferramenta and Grille) connected by tie bars (Pins). It is in very good condition despite its almost 850 years of history. The in situ survey of the Cathedral confirmed that the Ferramenta and the external grille are in general in relative good condition with the exception of some local failures. On th...

  12. Gas Marbles: Much Stronger than Liquid Marbles

    Science.gov (United States)

    Timounay, Yousra; Pitois, Olivier; Rouyer, Florence

    2017-06-01

    Enwrapping liquid droplets with hydrophobic particles allows the manufacture of so-called "liquid marbles" [Aussillous and Quéré Nature (London) 411, 924 (2001); , 10.1038/35082026Mahadevan Nature (London)411, 895 (2001), 10.1038/35082164]. The recent intensive research devoted to liquid marbles is justified by their very unusual physical and chemical properties and by their potential for various applications, from microreactors to water storage, including water pollution sensors [Bormashenko Curr. Opin. Colloid Interface Sci. 16, 266 (2011), 10.1016/j.cocis.2010.12.002]. Here we demonstrate that this concept can be successfully applied for encapsulating and protecting small gas pockets within an air environment. Similarly to their liquid counterparts, those new soft-matter objects, that we call "gas marbles," can sustain external forces. We show that gas marbles are surprisingly tenfold stronger than liquid marbles and, more importantly, they can sustain both positive and negative pressure differences. This magnified strength is shown to originate from the strong cohesive nature of the shell. Those interesting properties could be exploited for imprisoning valuable or polluted gases or for designing new aerated materials.

  13. Ionic liquid marbles.

    Science.gov (United States)

    Gao, Lichao; McCarthy, Thomas J

    2007-10-09

    Liquid marbles have been reported during this decade and have been argued to be potentially useful for microfluidic and lab-on-a-chip applications. The liquid marbles described to date have been composed of either water or glycerol as the liquid and hydrophobized lycopodium or silica as the stabilizing particles. Both of these components are potentially reactive and do not permit the use of organic chemistry; the liquids are volatile. We report the use of perfluoroalkyl particles (oligomeric (OTFE) and polymeric (PTFE) tetrafluoroethylene, which are unreactive) to support/stabilize a range of ionic liquid marbles. Ionic liquids are not volatile and have been demonstrated to be versatile solvents for chemical transformations. Water marbles prepared with OTFE are much more robust than those prepared with hydrophobized lycopodium or silica.

  14. Remotely controllable liquid marbles

    KAUST Repository

    Zhang, Lianbin; Cha, Dong Kyu; Wang, Peng

    2012-01-01

    Liquid droplets encapsulated by self-organized hydrophobic particles at the liquid/air interface - liquid marbles - are prepared by encapsulating water droplets with novel core/shell-structured responsive magnetic particles, consisting of a

  15. Electrowetting of liquid marbles

    International Nuclear Information System (INIS)

    Newton, M I; Herbertson, D L; Elliott, S J; Shirtcliffe, N J; McHale, G

    2007-01-01

    Electrowetting of water drops on structured superhydrophobic surfaces are known to cause an irreversible change from a slippy (Cassie-Baxter) to a sticky (Wenzel) regime. An alternative approach to using a water drop on a superhydrophobic surface to obtain a non-wetting system is to use a liquid marble on a smooth solid substrate. A liquid marble is a droplet coated in hydrophobic grains, which therefore carries its own solid surface structure as a conformal coating. Such droplets can be considered as perfect non-wetting systems having contact angles to smooth solid substrates of close to 180 0 . In this work we report the electrowetting of liquid marbles made of water coated with hydrophobic lycopodium grains and show that the electrowetting is completely reversible. Marbles are shown to return to their initial contact angle for both ac and dc electrowetting and without requiring a threshold voltage to be exceeded. Furthermore, we provide a proof-of-principle demonstration that controlled motion of marbles on a finger electrode structure is possible

  16. Remotely controllable liquid marbles

    KAUST Repository

    Zhang, Lianbin

    2012-07-26

    Liquid droplets encapsulated by self-organized hydrophobic particles at the liquid/air interface - liquid marbles - are prepared by encapsulating water droplets with novel core/shell-structured responsive magnetic particles, consisting of a responsive block copolymer-grafted mesoporous silica shell and magnetite core (see figure; P2VP-b-PDMS: poly(2-vinylpyridine-b- dimethylsiloxane)). Desirable properties of the liquid marbles include that they rupture upon ultraviolet illumination and can be remotely manipulated by an external magnetic field. 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Study of sulphation of Candoglia marble by means of micro X-ray diffraction experiments

    Science.gov (United States)

    Pedrazzani, R.; Alessandri, I.; Bontempi, E.; Cappitelli, F.; Cianci, M.; Pantos, E.; Toniolo, L.; Depero, L. E.

    2006-06-01

    This research is aimed at assessing the particular kind of damage caused by the interaction between atmospheric pollution and the marble surface of a magnificent late gothic church, Milan Cathedral, restored in the early 1970s. On the basis of visual inspections and diagnostic investigations the facade appears to be seriously damaged by surface erosion and thick black crusts; biological crusts, micro-fractures and detachments are widely present. This paper reports on SR-μXRD data collected at the Synchrotron Radiation Source (SRS), Daresbury Laboratory, and at the European Synchrotron Radiation Source (ESRF) from selected samples, covered with black crusts, originating from the Milan Cathedral facade. Mineralogical maps of the deterioration layers have been recorded by two spatial resolutions (5-100 μm), from the bulk of the stone material to the outer layer of the black surface. These maps help in elucidating the mechanism of formation of the black crusts.

  18. The Blue Marble

    Science.gov (United States)

    2002-01-01

    This spectacular Moderate Resolution Imaging Spectroradiometer (MODIS) 'blue marble' image is based on the most detailed collection of true-color imagery of the entire Earth to date. Using a collection of satellite-based observations, scientists and visualizers stitched together months of observations of the land surface, oceans, sea ice, and clouds into a seamless, true-color mosaic of every square kilometer (.386 square mile) of our planet. Most of the information contained in this image came from MODIS, illustrating MODIS' outstanding capacity to act as an integrated tool for observing a variety of terrestrial, oceanic, and atmospheric features of the Earth. The land and coastal ocean portions of this image is based on surface observations collected from June through September 2001 and combined, or composited, every eight days to compensate for clouds that might block the satellite's view on any single day. Global ocean color (or chlorophyll) data was used to simulate the ocean surface. MODIS doesn't measure 3-D features of the Earth, so the surface observations were draped over topographic data provided by the U.S. Geological Survey EROS Data Center. MODIS observations of polar sea ice were combined with observations of Antarctica made by the National Oceanic and Atmospheric Administration's AVHRR sensor-the Advanced Very High Resolution Radiometer. The cloud image is a composite of two days of MODIS imagery collected in visible light wavelengths and a third day of thermal infra-red imagery over the poles. A large collection of imagery based on the blue marble in a variety of sizes and formats, including animations and the full (1 km) resolution imagery, is available at the Blue Marble page. Image by Reto Stockli, Render by Robert Simmon. Based on data from the MODIS Science Team

  19. Portugues Marbles as Stone Heritage

    Science.gov (United States)

    Lopes, Luis; Martins, Ruben

    2013-04-01

    The main objective of this paper is to present and justify the reasons for the worldwide recognition of Portuguese Marbles as Stone Heritage. These marbles are also known as "Estremoz Marble" since was the first county were exploited. In the Estremoz Anticline marbles occupy an intermediate stratigraphic position being part of a volcano-sedimentary sequence of Cambrian age. The anticlinal structure has a Precambrian core and the younger rocks aged Devonian Period. This sequence has deformed by the Variscan Orogeny, which performed twice with different intensities both in ductile and brittle tension fields. The early Alpine Cycle also acts in the region and cause more fracturing of the marble. Practically in all the quarries is possible to perceive the spatial-temporal continuity of the deformation where one can describe a complete Wilson Cycle. Together all these geological features imprint the marbles beautiful aesthetic patterns that can be highlighted when used as dimension stone. Nowadays most of the quarries are placed in the counties of Borba and mainly in Vila Viçosa. This last city claims for itself the "Capital of the Marble" title and named the marble as "White Gold". In fact, according to the historical record, the marbles were quarried in Portuguese Alentejo's Province since the fourth century BC. Locally these geological materials are available easily accessible. Exhibit physical properties that allow the fabrication of structural and decorative elements and so were used since humans settled in the region and developed a structured Society. In the Roman period, the pieces of art made with Estremoz Marbles were exported abroad and today are represented in Museums and Archaeological Sites throughout Europe and North Africa countries. The Portuguese Marbles and Limestones, transformed into altars, stairways, columns, statues and pieces of wall cladding, were carried as ballast in the holds of ships. At the destination the Portuguese People had built

  20. Liquid marbles: Physics and applications

    Indian Academy of Sciences (India)

    Therefore, designing the porosity of the sheath can ... manufactured in the traditional rolling process and those manufactured by the dropping of water droplets onto a ..... Continuous production of liquid marbles would involve heating at low ...

  1. THE COMPLEX OF ASSUMPTION CATHEDRAL OF THE ASTRAKHAN KREMLIN

    Directory of Open Access Journals (Sweden)

    Savenkova Aleksandra Igorevna

    2016-08-01

    Full Text Available This article is devoted to an architectural and historical analysis of the constructions forming a complex of Assumption Cathedral of the Astrakhan Kremlin, which earlier hasn’t been considered as a subject of special research. Basing on the archival sources, photographic materials, publications and on-site investigations of monuments, the creation history of the complete architectural complex sustained in one style of the Muscovite baroque, unique in its composite construction, is considered. Its interpretation in the all-Russian architectural context is offered. Typological features of single constructions come to light. The typology of the Prechistinsky bell tower has an untypical architectural solution - “hexagonal structure on octagonal and quadrangular structures”. The way of connecting the building of the Cathedral and the chambers by the passage was characteristic of monastic constructions and was exclusively seldom in kremlins, farmsteads and ensembles of city cathedrals. The composite scheme of the Assumption Cathedral includes the Lobnoye Mesto (“the Place of Execution” located on an axis from the West, it is connected with the main building by a quarter-turn with landing. The only prototype of the structure is a Lobnoye Mesto on the Red Square in Moscow. In the article the version about the emergence of the Place of Execution on the basis of earlier existing construction - a tower “the Peal” which is repeatedly mentioned in written sources in connection with S. Razin’s revolt is considered. The metropolitan Sampson, trying to keep the value of the Astrakhan metropolitanate, builds the Assumption Cathedral and the Place of Execution directly appealing to a capital prototype to emphasize the continuity and close connection with Moscow.

  2. Similar Fracture Patterns in Human Nose and Gothic Cathedral.

    Science.gov (United States)

    Lee, Shu Jin; Tse, Kwong Ming; Lee, Heow Pueh

    2015-10-01

    This study proposes that the bony anatomy of the human nose and masonry structure of the Gothic cathedral are geometrically similar, and have common fracture patterns. We also aim to correlate the fracture patterns observed in patients' midface structures with those seen in the Gothic cathedral using computational approach. CT scans of 33 patients with facial fractures were examined and compared with computer simulations of both the Gothic cathedral and human nose. Three similar patterns were found: (1) Cracks of the nasal arch with crumpling of the vertical buttresses akin to the damage seen during minor earthquakes; (2) lateral deviation of the central nasal arch and collapse of the vertical buttresses akin to those due to lateral forces from wind and in major earthquakes; and (3) Central arch collapse seen as a result of collapse under excessive dead weight. Interestingly, the finding of occult nasal and septal fractures in the mandible fractures with absence of direct nasal trauma highlights the possibility of transmission of forces from the foundation to the arch leading to structural failure. It was also found that the structural buttresses of the Gothic cathedral delineate the vertical buttresses in the human midface structure. These morphologic similarities between the human nose and Gothic cathedral will serve as a basis to study the biomechanics of nasal fractures. Identification of structural buttresses in a skeletal structure has important implications for reconstruction as reestablishment of structural continuity restores normal anatomy and architectural stability of the human midface structure. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  3. Macroscopical morphology of deterioration of the stone in the Cathedral of Cádiz, Spain

    Directory of Open Access Journals (Sweden)

    Alcalde, M.

    1990-12-01

    Full Text Available Two factors have determined the actual deterioration state of the Cathedral of Cádiz, one is natural and the other is anthropogenic. On one hand, the presence of salts conditioned by atmospherical environment and saline solutions of the rising damp; on the other hand, the vicissitudes suffered by the temple during its construction, having been unprotected for long periods of time both internally and externally the bad use of the building and the little maintenance carried out on it. The crystallization and dissolution, and salt hydratation and dehydratation mechanisms have provoked serious deteriorations in the foreign lithotypes: spalling in compact limestones, chipping and pulverizations in marbles; the autochthonous “ostionera", well-balanced in the medium, presents a good state of conservation. The interior of the Cathedral, contrary to the normal, is much more degraded than the exterior.

    Dos son los factores de alteración que han determinado el estado actual de alteración de la Catedral de Cádiz, uno natural y otro antropogénico. Por una parte la presencia de sales, condicionada tanto por el ambiente atmosférico como por la ascensión capilar desde el subsuelo de soluciones salinas; por otra, las vicisitudes sufridas por el templo durante su construcción, desprotegido del medio largos períodos de tiempo tanto interior como exteriormente, el mal uso del mismo y las escasas actuaciones de mantenimiento. Los mecanismos de aumento de volumen en capilares e intersticios ligados a la cristalización y disolución, e hidratación y deshidratación de sales, han provocado graves alteraciones en los litotipos foráneos, siendo los indicadores de alteración más típicos en esta Catedral las fragmentaciones en las calizas compactas, disyunciones y pulverizaciones en los mármoles, y eflorescencias de forma general; la autóctona ostionera, en buen equilibrio con el medio, presenta un buen estado de conservación. El interior de la

  4. Candoglia Marble and the "Veneranda Fabbrica del Duomo di Milano": a resource for Global Heritage Stone Designation in the Italian Alps

    Science.gov (United States)

    Borghi, Alessandro; Castelli, Daniele; Corbetta, Elio; Antonella Dino, Giovanna

    2015-04-01

    Alpine marbles have been widely used in the past for celebrated, both indoor and outdoor, applications. Among them, the Candoglia Marble, a worldwide known and appreciated georesource, and its "bastard brother" from the nearby Ornavasso area were and are exploited in the Verbano-Cusio-Ossola quarry basin of Northwestern Italian Alps. They crop out as lenses (up to 30 m in thickness) interlayered within high-grade paragneisses of the Ivrea Zone, a section of deep continental crust that experienced amphibolite- to granulite-facies metamorphism of Palaeozoic age. The Candoglia and Ornavasso Marbles are pinkish to greyish, coarse-grained (> 3 mm), calcitic marbles with frequent, cm-thick, dark-greenish silicate layers containing diopside and tremolite; minor minerals include quartz, epidote, sulphides, Ba-feldspar, barite and, occasionally, phlogopite. First record of quarrying activities in the area arises to the Roman age (Ornavasso quarrying area). Both the Ornavasso and Candoglia Marbles were widely employed in local construction (San Nicola Church and Torre della Guardia at Ornavasso, Madonna di Campagna Church at Verbania, San Giovanni in Montorfano Church), but they became famous thanks to their application for the "Duomo di Milano" since the fourteenth century. At the beginning, the building stones employed for the construction of the Gothic style, Duomo di Milano were quarried in the Ornavasso area, but in a short time, the Candoglia quarry (property of the so-called "Veneranda Fabbrica del Duomo" that incessantly takes care of the Cathedral Church from 1387 A.D.) became the main quarry for the construction and maintenance of the Cathedral. The Candoglia quarry developed during the centuries, from open pit small quarries to a unique underground quarry, characterised by a very peculiar quarrying activities (subvertical bench characterized by strong lateral forces, which have to be contrasted and monitored). The Candoglia Marble was preferred to Carrara marbles

  5. The Tower and Glass Marbles Problem

    Science.gov (United States)

    Denman, Richard T.; Hailey, David; Rothenberg, Michael

    2010-01-01

    The Catseye Marble company tests the strength of its marbles by dropping them from various levels of their office tower, to find the highest floor from which a marble will not break. We find the smallest number of drops required and from which floor each drop should be made. We also find out how these answers change if a restriction is placed on…

  6. Macroscopical morphology of deterioration of the stone in the cathedral of Guadíx/Spain

    Directory of Open Access Journals (Sweden)

    Alcalde, M.

    1991-12-01

    Full Text Available The main factors of deterioration that affect the Cathedral of Guadíx are of a natural origin, basically thermic and hydraulic, due to its great oscillations in temperature in Summer, the frequency of frosts in Winter and the rains. The lithotypes employed are mainly calcarenite of mean porosite and slightly more compact limestones from the quarries in the area, and marbles. The corresponding deterioration mechanisms are those of differential thermic dilatations caused by thermic jumps, especially in the more compact stones, those of increase in volume in capillaries and interstices, especially by freezing, and those of dissolution. The most serious deterioration indicators are fissures and spalling that affect the most carved elements and which have taken the greater part of the most aerated elements such as the pinnacles to a state to ruin.

    Los principales factores de alteración que afectan a la catedral de Guadix son de origen natural, fundamentalmente térmico e hidráulico, por sus grandes oscilaciones de temperatura en verano y por la frecuencia de heladas en invierno, y por la lluvias. Los litotipos empleados son principalmente calcarenitas de porosidad media y calizas algo más compactas, procedentes de canteras de la zona, y mármoles. Los mecanismos de alteración correspondientes son los de dilatación térmica diferencial originados por los saltos térmicos, en especial en las piedras más compactas, los de incremento de volumen en capilares e intersticios, sobre todo por heladicidad, y los de disolución. Los indicadores de alteración más graves son las fisuras y fragmentaciones que afectan a los elementos más labrados y que han llevado al estado de ruina a la mayor parte de los elementos más aireados como los pináculos.

  7. "Friends" of Anglican Cathedrals: Norms and Values. Befriending, Friending or Misnomer?

    Science.gov (United States)

    Muskett, Judith A.

    2013-01-01

    Loyal supporters of Anglican cathedrals first subscribed to "Friends" associations in the late 1920s. Yet, in 1937, a journalist in "The Times" portrayed cathedrals as a "queer thing to be a friend of." Drawing on theories of friendship from a range of disciplines, and surveys of what has been proclaimed in the public…

  8. Construction of St. Michael’s the Archangel Cathedral in Sochi (1874–1891

    Directory of Open Access Journals (Sweden)

    Vladimir G. Ivantsov

    2012-10-01

    Full Text Available The article, basing on archive data, describes the hard process of the construction of St. Michael’s the Archangel Cathedral in Sochi in 1874–1891. Special attention is attached to the role of architect A.S. Kaminsky in the construction of the cathedral.

  9. Canterbury cathedral: structural analysis of the South Aisle

    OpenAIRE

    Karanikoloudis, Georgios

    2014-01-01

    Dissertação de mestrado em Advanced Masters in Structural Analysis of Monuments and Historical Constructions The Canterbury Cathedral at Canterbury Kent, in the UK, seat of the Archbishop of Canterbury, head of the Anglican Church, stands as a monument of English Gothic architecture of immense importance, and is part of the UNESCO World Heritage site. Its central nave and lateral aisles, secluded by the twin bell towers of the west front and the west transept, with a 72 m tower a...

  10. The cathedrals of science CERN, 1954-2004

    CERN Document Server

    Aymar, Robert; De Rújula, Alvaro; Lamont, Mike; Baldy, Jean Luc; Della Negra, Michel; Schükraft, Jürgen; Nakada, Tatsuya; Gianotti, F; Landua, Rolf; Rubio, Juan Antonio; Cailliau, Robert; Grey, François; Giacoletto, Sergio; CERN. Geneva; New Atlantis. Bloomington

    2004-01-01

    Since 1954 CERN, the most prestigious particle physics laboratory, have been building gigantic devices to discover the intimate nature of matter. These huge technological cathedrals are the new LHC accelerator and the particle decetors. These inmense machines capable of revealing the secrets of the microcosmos. This is a journey back through millions of years to the very origin of the univers: the Big Bang. This documentary will reveal all answers on the scientific nature of matter and provide a comprehensive account of one of the greatest experiments ever made.

  11. TRAVERTINE THE RESTORATION STONE FOR THE ZAGREB CATHEDRAL

    Directory of Open Access Journals (Sweden)

    Branko Crnković

    1995-12-01

    Full Text Available Roman travertine San Pietro Classico, from a deposit in the Acque Albule basin near Rome, will be used for the restoration of the cathedral in Zagreb instead of the previosly used lithotamnian limestone. The genesis and properties of travertine are described. Also the differences in genesis and characteristics of travertine and calc-tufa are presented. Travertine and calc-tufa are created by different genetic processes and thus cannot be considered equivalent. Travertine is a dimensional stone that has world-wide significance, while calc-tufa, has only local or at the most some minor regional importance.

  12. Marble protection: An inorganic electrokinetic approach

    Energy Technology Data Exchange (ETDEWEB)

    Meloni, Paola, E-mail: paola.meloni@dimcm.unica.it [Department of Mechanical, Chemical and Materials Engineering (DIMCM), University of Cagliari, Via Marengo 2, 09123 Cagliari (Italy); Manca, Francesco, E-mail: ing.francesco.manca@gmail.com [Department of Mechanical, Chemical and Materials Engineering (DIMCM), University of Cagliari, Via Marengo 2, 09123 Cagliari (Italy); Carcangiu, Gianfranco, E-mail: gcarcan@unica.it [Istituto di Geologia Ambientale e Geoingegneria (IGAG), CNR, Piazza d’Armi, 09123 Cagliari (Italy)

    2013-05-15

    The influence of an electric potential difference in an aqueous solution was studied as a method for depositing a calcium oxalate coating over a weathered carbonatic stone. Samples of weathered Carrara white marble were treated at 15 and 50 °C for 5 h in an electrokinetic cell, specifically conceived for this study, containing a solution of ammonium oxalate (4% by weight), and were subsequently characterised by scanning electron microscopy, X-ray diffractometry, thermogravimetric analysis and mercury intrusion porosimetry. The electrokinetic treatment proved to be a cost effective and time saving process, able to produce a thick and homogeneous calcium oxalate coating over the stone surface that improves its chemical and physical resistance in low pH environments, and is able to protect the stone from the by-products of urban pollution.

  13. Marble protection: An inorganic electrokinetic approach

    Science.gov (United States)

    Meloni, Paola; Manca, Francesco; Carcangiu, Gianfranco

    2013-05-01

    The influence of an electric potential difference in an aqueous solution was studied as a method for depositing a calcium oxalate coating over a weathered carbonatic stone. Samples of weathered Carrara white marble were treated at 15 and 50 °C for 5 h in an electrokinetic cell, specifically conceived for this study, containing a solution of ammonium oxalate (4% by weight), and were subsequently characterised by scanning electron microscopy, X-ray diffractometry, thermogravimetric analysis and mercury intrusion porosimetry. The electrokinetic treatment proved to be a cost effective and time saving process, able to produce a thick and homogeneous calcium oxalate coating over the stone surface that improves its chemical and physical resistance in low pH environments, and is able to protect the stone from the by-products of urban pollution.

  14. Marble protection: An inorganic electrokinetic approach

    International Nuclear Information System (INIS)

    Meloni, Paola; Manca, Francesco; Carcangiu, Gianfranco

    2013-01-01

    The influence of an electric potential difference in an aqueous solution was studied as a method for depositing a calcium oxalate coating over a weathered carbonatic stone. Samples of weathered Carrara white marble were treated at 15 and 50 °C for 5 h in an electrokinetic cell, specifically conceived for this study, containing a solution of ammonium oxalate (4% by weight), and were subsequently characterised by scanning electron microscopy, X-ray diffractometry, thermogravimetric analysis and mercury intrusion porosimetry. The electrokinetic treatment proved to be a cost effective and time saving process, able to produce a thick and homogeneous calcium oxalate coating over the stone surface that improves its chemical and physical resistance in low pH environments, and is able to protect the stone from the by-products of urban pollution.

  15. Biofouling of marbles by oxygenic photosynthetic microorganisms.

    Science.gov (United States)

    Karaca, Zeki; Öztürk, Ayten; Çolak, Emel

    2015-08-01

    Phototrophic microorganisms disfigure the surfaces of different types of stone. Stone structure is damaged by the activity of photoautotrophic and other microorganisms. However, to date few, investigations have been undertaken into the relationship between microorganisms and the properties of different types of marble. In this study, biological activity of photoautotrophic microorganisms on three types of marble (Yatagan White, Giallo Anticato and Afyon White) was investigated under laboratory conditions over a short period of time. The three types of marble supported the growth of phototrophic microbial communities on their outer and inner layers, turning their original colour from white to a yellowish green colour. The porosity of the marble types facilitated filamentous microbial growth in the presence of water. Scanning electron microscope analysis revealed the accumulation of aggregates such as small spherical, fibrillar, calcified globular bodies on the inner surfaces of the marbles. This suggests that the microscopic characteristics of particular marble types may stimulate the growth of certain types of microorganisms.

  16. Marble Canyon spring sampling investigation

    International Nuclear Information System (INIS)

    McCulley, B.

    1985-10-01

    The Mississippian Leadville Limestone is the most permeable formation in the lower hydrostratigraphic unit underlying the salt beds of the Paradox Formation in Gibson Dome, Paradox Basin, Utah, which is being considered as a potential nuclear waste repository site. The closest downgradient outcrop of the Mississippian limestone is along the Colorado River in Marble Canyon, Arizona. This report describes the sampling and interpretation of springs in that area to assess the relative contribution of Gibson Dome-type Leadville Limestone ground water to that spring discharge. The high-volume (hundreds of liters per second or thousands of gallons per minute) springs discharging from fault zones in Marble Canyon are mixtures of water recharged west of the Colorado River on the Kaibab Plateau and east of the river in the Kaiparowits basin. No component of Gibson Dome-type Leadville Limestone ground water is evident in major and trace element chemistry or isotopic composition of the Marble Canyon Springs. A low-volume (0.3 liters per second or 5 gallons per minute) spring with some chemical and isotopic characteristics of Gibson Dome-type Leadville Limestone water diluted by Kaiparowits basin-type water issues from a travertine mound in the Bright Angel Shale on the Little Colorado River. However, the stable isotopic composition and bromide levels of that spring discharge, in addition to probable ground-water flow paths, contradict the dilution hypothesis

  17. Investigation of photon attenuation coefficients for marble

    International Nuclear Information System (INIS)

    Basyigit, C; Akkurt, I; Kilincarslan, S; Akkurt, A

    2005-01-01

    The total linear attenuation coefficients μ (cm -1 ) have been obtained using the XCOM program at photon energies of 1 keV to 1 GeV for six different natural marbles produced in different places in Turkey. The individual contribution of photon interaction processes to the total linear attenuation coefficients for marble has been investigated. The calculated results were also compared with the measurements. The results obtained for marble were also compared with concrete. (note)

  18. The geochemical chararateristics of the marble deposits east of ...

    African Journals Online (AJOL)

    ), marbles were investigated with the view to establishing marble occurrences and their geochemical characteristics. Crystalline rocks of the Nigerian Basement Complex (migmatite – gneiss complex) underlie the area. Ten marble bodies were ...

  19. Novel Hydroxyapatite Coatings for the Conservation of Marble and Limestone

    Science.gov (United States)

    Naidu, Sonia

    Marble and limestone are calcite-based materials used in the construction of various structures, many of which have significant artistic and architectural value. Unfortunately, due to calcite's high dissolution rate, these stones are susceptible to chemically-induced weathering in nature. Limestone, due to its inherent porosity, also faces other environmental weathering processes that cause weakening from disintegration at grain boundaries. The treatments presently available are all deficient in one way or another. The aim of this work is to examine the feasibility of using hydroxyapatite (HAP) as a novel protective coating for marble and limestone, with two goals: i) to reduce acid corrosion of marble and ii) to consolidate physically weathered limestone. The motivation for using HAP is its low dissolution rate and structural compatibility with calcite. Mild, wet chemical synthesis routes, in which inorganic phosphate-based solutions were reacted with marble and limestone, alone and with other precursors, were used to produce HAP films. Film nucleation, growth and phase evolution were studied on marble to understand film formation and determine the optimal synthesis route. An acid resistance test was developed to investigate the attack mechanism on marble and quantify the efficacy of HAP-based coatings. Film nucleation and growth were dependent on substrate surface roughness and increased with calcium and carbonate salt additions during synthesis. Acid attack on marble occurred via simultaneous dissolution at grain boundaries, twin boundaries and grain surfaces. HAP provided intermediate protection against acid attack, when compared to two conventional treatments. Its ability to protect the stone from acid was not as significant as predicted from dissolution kinetics and this was attributed to incomplete coverage and residual porosity within the film, arising from its flake-like crystal growth habit, which enabled acid to access the underlying substrate. The

  20. The orange-brown patina of Salisbury Cathedral (West Porch) surfaces: evidence of its man-made origin.

    Science.gov (United States)

    Martín-Gil, Jesus; Martín-Gil, Francisco Javier; del Carmen Ramos-Sánchez, Maria; Martín-Ramos, Pablo

    2005-09-01

    In this paper, we attempt to elucidate the composition and origin of the orange patina on the surfaces of the West-Porch of Salisbury Cathedral by comparison to other known patinas: (i) the orange-brown patina on the marble surfaces of the Acropolis in Athens and the Arch of Titus in Rome whose analyses have shown very high amounts of phosphates, and generally amino acids from animal-skin glue or other protein binders; (ii) the phosphated patinas which also contain oxalates, found in 1996 on Catalonian calcareous sandstones and in the calcareous dolomites of the Monastery of Silos, Spain, whose origin is either the application of calcium caseinate, or egg yolk and animal glue; and (iii) the patinas with only oxalates found in some of Verona's monuments (St. Zeno) and Spanish sites as in the Monastery of Guadalupe and Cuenca cathedral, formed either by the mineralization of algal filaments or by biological reactions yielding oxalate from yolk egg (added to stone as part of preservative empirical treatments). In the winter of 2003, the West-Porch of Salisbury Cathedral received conservation works, but the old patina was not entirely removed. This fact has allowed us to collect the samples for its study. The IR spectra were registered with a Golden Gate ATR Mk II system using attenuated total reflectance Fourier transform infrared (ATR/FTIR) spectrometry. Mineral composition was determined by XRD (Philips PW 1710 spectrometer with Cu tube), whereas major and trace elements analyses were performed by XRF (Philips PW1480 PW). Microscopy examination was performed on a Leica M655 microscope. Phosphate, oxalate, calcium and sulphate contents were analysed by usual chemical methods. ATD-FTIR spectra of the Salisbury's patina exhibit peaks at 2361, 2341 and 671 cm(-1) (assigned to phosphates); 3410, 1680, 1620, 1122 and 602 cm(-1) (assigned to sulphates); and 1447/1437 and 876 cm(-1) (attributed to carbonates). The little peaks at 1620 and 798 cm(-1) could be assigned to

  1. Cracking pattern and seismic performance assessment of the Orvieto cathedral

    International Nuclear Information System (INIS)

    De Canio, G.

    2015-01-01

    In this paper are described the in situ cracking pattern measurement and ambient vibration monitoring for the seismic performance evaluation of the Orvieto Cathedral Italy, according the deplacement based safety assessment. This requires, as a first step, the direct measurement of the cracking pattern and dynamic response of the structural macro elements of the cathedral due to weak vibrations induced by traffic and seismic micro tremors. Seismic assessment for this type of structure require also the proper limit states definitions. In fact, in the case historic monuments like churches, due to the presence of specific typology of macro elements: rigid blocks, complex vault systems, slenderness of the walls, presence of wide halls, domes and drums with particular geometry, is necessary to define the proper assessment procedures which are slightly different with respect those required for conventional civil industrial buildings. Regarding the Ambient vibration monitoring, a new approach to estimate the participating masses associated to the macro element kinematics is defined: it is based on the frequency contribution to the Root Main Square Acceleration, obtained by numerical integration of the Power Spectral Density (PSD) function. This information, when associated to the analysis of the Real and Imaginary part of the Cross Spectral Density (CSD) function between the acceleration time histories at different points, allow to identify the principal (at least first and second) mode shapes of the structure.

  2. Natural cement and stone restoration of Bourges Cathedral (France

    Directory of Open Access Journals (Sweden)

    C. Gosselin

    2008-01-01

    Full Text Available Natural cement, also called "Roman cement", was invented at the end of the 18th Century and played an important role in the development of civil engineering works until the 1860s. More surprisingly, it was also used to restore historic buildings, such as gothic cathedrals. This paper deals with the mineralogy and the durability of natural cement, in the particular case of the Bourges Cathedral in France. This study illustrates the interest of this material particularly adapted in stone repair or substitution. Contrary to traditional mortars, the present samples are made of neat cement paste, revealed by the absence of mineral additions as quartz or carbonate sand. Several combined techniques (SEM-EDS, TGA, XRD were carried out to determine the composition of the hydraulic binder rich in calcium aluminate hydrates. The raw marl at the origin of the cement production contains oxidized pyrites which consist in a potential source of sulphate pollution of the surrounding limestone. The exposition of the cement in urban environment leads to some weathering features as atmospheric sulphation. Finally a petrophysical approach, based on water porosity, capillary sorption and compressive strength, has been performed to demonstrate the durability and the compatibility of roman cement applied as a restoration mortar of historical building.

  3. Unknown Angels by Giuseppe Groppelli in Zadar and the Former Altar of St Anastasia in the Cathedral

    Directory of Open Access Journals (Sweden)

    Damir Tulić

    2016-01-01

    Full Text Available As the former capital of Dalmatia, Zadar abounded in monuments produced during the 17th and 18th century, especially altars, statues, and paintings. Most of this cultural heritage had been lost by the late 18th and the first decades of the 19th century, when the former Venetian Dalmatia was taken over by Austrian administration, followed by the French and then again by the Austrian one. Many churches were closed down, their furnishings were sold away or lost, and the buildings were either repurposed or demolished. One of them had been home to two hitherto unpublished angels-putti located on the top of the inner side of the arch in the sanctuary of Zadar’s church of Our Lady of Health (Kaštel at the end of Kalelarga (Fig. 1. Both marble statues were obviously adjusted and then placed next to the marble cartouche with a subsequently added inscription from 1938, which tells of a reconstruction of the church during the time it was administered by the Capuchins. The drapery of the right angel-putto bears the initials I. G., which should be interpreted as the signature of the Venetian sculptor Giuseppe Groppelli (Venice, 1675-1735. This master signed his full name as IOSEPH GROPPELLI on the base of a statue of St Chrysogonus, now preserved in the Permanent Exhibition of Religious Art in Zadar (Fig. 2. Same as the signed statue of St Anastasia by master Antonio Corradini (Fig. 3, it used to form part of the main altar in Zadar’s monumental church of St Donatus, desacralized in 1798. Recently, two more angels have been discovered, inserted in the tympanum of the main altar in the church of Madonna of Loreto in Zadar’s district of Arbanasi, the one to the right likewise bearing the initials I. G. (Fig. 4. Undoubtedly, these two artworks were once part of a single composition: the abovementioned former altar in the church of St Donatus, transferred to the cathedral in 1822 and reconstructed to become the new altar in the chapel of St Anastasia

  4. GEOPHYSICAL INVESTIGATION OF MARBLE OCCURRENCE IN ...

    African Journals Online (AJOL)

    The marble deposit is characterised by both local resistivity highs (in the range of 20-61 ohm-m within an immediate background of less than 10 ohm-m and low magnetic effect of less than 800 gammas. The outline of the marble deposit based on the above characteristic has an approximately NE-SW trend with a lateral and ...

  5. The Marble-Hand Illusion.

    Science.gov (United States)

    Senna, Irene; Maravita, Angelo; Bolognini, Nadia; Parise, Cesare V

    2014-01-01

    Our body is made of flesh and bones. We know it, and in our daily lives all the senses constantly provide converging information about this simple, factual truth. But is this always the case? Here we report a surprising bodily illusion demonstrating that humans rapidly update their assumptions about the material qualities of their body, based on their recent multisensory perceptual experience. To induce a misperception of the material properties of the hand, we repeatedly gently hit participants' hand with a small hammer, while progressively replacing the natural sound of the hammer against the skin with the sound of a hammer hitting a piece of marble. After five minutes, the hand started feeling stiffer, heavier, harder, less sensitive, unnatural, and showed enhanced Galvanic skin response (GSR) to threatening stimuli. Notably, such a change in skin conductivity positively correlated with changes in perceived hand stiffness. Conversely, when hammer hits and impact sounds were temporally uncorrelated, participants did not spontaneously report any changes in the perceived properties of the hand, nor did they show any modulation in GSR. In two further experiments, we ruled out that mere audio-tactile synchrony is the causal factor triggering the illusion, further demonstrating the key role of material information conveyed by impact sounds in modulating the perceived material properties of the hand. This novel bodily illusion, the 'Marble-Hand Illusion', demonstrates that the perceived material of our body, surely the most stable attribute of our bodily self, can be quickly updated through multisensory integration.

  6. Damage Recovery in Carrara Marble

    Science.gov (United States)

    Meyer, G.; Brantut, N.; Mitchell, T. M.; Meredith, P. G.

    2017-12-01

    We investigate the effect of confining pressure on the recovery of elastic wave velocities following deformation episodes in Carrara Marble. Dry Carrara Marble cores were deformed in the ductile regime (Pc = 40 MPa) up to 3% axial strain. After deformation, samples were held at constant stress conditions for extended periods of time (5-8 days) whilst continuously recording volumetric strain and seismic wave velocities. The velocity data were used to invert for microcrack densities using an effective medium approach. Finally, thin sections were produced to characterise the microstructures after recovery. During deformation, elastic wave speeds decreased with increasing strain by more than 30% of the value for the intact rock due to the formation of distributed microcracks. Under constant hydrostatic pressure, wave speeds progressively recovered 12-90% of the initial drop, depending on the applied confining pressure. In contrast, the strain recovery (deformation towards the initial shape of the sample) during holding time is negligible (of the order of 10-4). Tests performed under nonhydrostatic (triaxial) stress conditions during recovery showed some time-dependent creep deformation together with very significant recovery of wave velocities. The recovery is interpreted as a progressive reduction in crack density within the sample. The process is highly dependent on confining pressure, which favours it. We propose that the driving process for wave speed recovery is the time-dependent increase of contact area between crack surfaces due to the formation and growth of asperity contacts. We develop a micromechanical model for crack closure driven by asperity creep, which shows a good fit to the experimental data. Most of the recovery is achieved in the initial few hours, implying it is the fastest recovery or healing process, and thus occurs prior to any chemical healing or mineral precipitation. Our data corroborate field observations of post-seismic fault behavior.

  7. Deterioration of ancient metallic elements taken from Toledo cathedral

    Directory of Open Access Journals (Sweden)

    Castaño González, Juan Guillermo

    2001-08-01

    Full Text Available The construction of Toledo Cathedral spanned a period of more than 200 years and was influenced by many different trends and criteria, reflected in the wide range of styles it accommodates (basically Mudéjar and Gothic, with Flemish, baroque and renaissance elements. Over the centuries it has undergone numerous restorations, also according to different criteria. The cathedral is situated in an environment of low aggressivity, in terms of atmospheric contamination, but the passage of time has taken its toll on many structural, architectural and artistic elements. During recent restoration work several metallic elements, which have been exposed for many years or even centuries to the inclemencies of the Toledo climate, were taken in order to analyse their composition and deterioration. The techniques used have been Scanning Electron Microscopy with X-Ray Microprobe (SEM/EDAX, X-Ray Photoelectron Spectroscopy (XPS and X-Ray Diffraction (XRD. The elements considered are a piece of roofing lead, a lead slate clamp, a piece of stained glass window leading, and an iron nail.

    La Catedral de Toledo se edificó en un período de más de 200 años, bajo numerosos criterios de construcción que se reflejan en la multiplicidad de estilos que alberga (entre mudéjar y gótico, con aportaciones flamencas, barrocas y renacentistas. A través de los siglos, ha sido objeto de numerosas restauraciones, también bajo distintos criterios. La catedral está ubicada en un ambiente poco agresivo, en cuanto a corrosión atmosférica se refiere. Sin embargo, el discurrir de tantos años no deja de hacer mella en los diversos elementos estructurales, arquitectónicos y artísticos que la componen. En recientes restauraciones se obtuvieron algunos elementos metálicos que han estado expuestos, por muchos años, siglos inclusive, a las inclemencias del clima toledano, con el propósito de analizar su composición y deterioro, empleando las técnicas de Microscopio

  8. Marble Ageing Characterization by Acoustic Waves

    Science.gov (United States)

    Boudani, Mohamed El; Wilkie-Chancellier, Nicolas; Martinez, Loïc; Hébert, Ronan; Rolland, Olivier; Forst, Sébastien; Vergès-Belmin, Véronique; Serfaty, Stéphane

    In cultural heritage, statue marble characterization by acoustic waves is a well-known non-destructive method. Such investigations through the statues by time of flight method (TOF) point out sound speeds decrease with ageing. However for outdoor stored statues as the ones in the gardens of Chateau de Versailles, ageing affects mainly the surface of the Carrara marble. The present paper proposes an experimental study of the marble acoustic properties variations during accelerated laboratory ageing. The surface degradation of the marble is reproduced in laboratory for 29 mm thick marble samples by using heating/cooling thermal cycles on one face of a marble plate. Acoustic waves are generated by 1 MHz central frequency contact transducers excited by a voltage pulse placed on both sides of the plate. During the ageing and by using ad hoc transducers, the marble samples are characterized in transmission, along their volume by shear, compressional TOF measurements and along their surface by Rayleigh waves measurements. For Rayleigh waves, both TOF by transducers and laser vibrometry methods are used to detect the Rayleigh wave. The transmission measurements point out a deep decrease of the waves speeds in conjunction with a dramatic decrease of the maximum frequency transmitted. The marble acts as a low pass filter whose characteristic frequency cut decreases with ageing. This pattern occurs also for the Rayleigh wave surface measurements. The speed change in conjunction with the bandwidth translation is shown to be correlated to the material de-structuration during ageing. With a similar behavior but reversed in time, the same king of phenomena have been observed trough sol-gel materials during their structuration from liquid to solid state (Martinez, L. et all (2004). "Chirp-Z analysis for sol-gel transition monitoring". Ultrasonics, 42(1), 507-510.). A model is proposed to interpret the acoustical measurements

  9. Study of water-repellent treatments applied on limestone from Andalusian Cathedrals

    Directory of Open Access Journals (Sweden)

    Villegas, R.

    1991-09-01

    Full Text Available Five types of stone used in Andalusian Cathedrals have been treated with different water-repellent treatments, to evaluate the effects of this products. The stones studied are limestone, calcarenite and dolomite; the products applied are organosilicones and acrylics. In this work properties related with water access and movement through the stone have been measured and compared their values before and after the application of the treatments.

    Se han tratado varios tipos de piedra utilizados en Catedrales Andaluzas con diversos productos hidrófugos, con el fin de evaluar las características conferidas por los mismos. Los tipos de piedra son de naturaleza caliza, calcarenitas y dolomías; los productos son organosilícicos y acrílicos. En este trabajo se han medido las propiedades relacionadas con el acceso y movimiento de agua en la piedra, comparándose sus valores antes y después de la aplicación del tratamiento.

  10. The museum setup in the Benedictine dormitory of Monreale: the artworks of Santa Maria del Bosco and the textile artefacts of the Cathedral, Sicily, Italy

    Directory of Open Access Journals (Sweden)

    Maria Concetta di Natale

    2018-03-01

    Full Text Available The recent decision to convert the Benedictine Dormitory in Monreale into an exhibition site offers the opportunity to enjoy the whole monumental complex where the wonderful cloister is the core attraction. It is on this site that the Norman Cathedral stands, brightly decorated with golden mosaics. The new exhibition has gathered together the artworks from the ruined abbey of Santa Maria del Bosco in Calatamauro and added them to the artefacts already exhibited at the Diocesan Museum. They include marble gravestones from the 16th-17th century church and those dating to the 18th century; one stone is in polychrome marble of the family of the canons, Candes and Donato; another was used for the burial of the monks from the period of the Olivetan refoundation, characterized by the Order’s coat of arms and attributed to Girolamo Musca. There are also majolica tiles from the chapels in cornu evangelij (left side of the altar adorned with large vegetal-shaped decorations, provided by Palermitan manufacturers in the mid-eighteenth century. They are found next to the remnants of the majolica tiles still in situ, executed in 1762 by the potters from Burgio, in Sicily. Rosario Rosso (also Russo and Giuseppe Virgadamo. Also commissioned after the refoundation of the holy temple are the four artworks by the painter Ippolito Ferrante, three of which, Sacrificio di Isacco, Melchisedec and Giale e Sisar, are on exhibition in the prestigious museum. Alongside these artworks are noteworthy textile artefacts made between the second half of the 16th and second half of the 18th centuries some of which are linked to the munificent figures of archbishops such as Ludovico II Torres and Francesco Testa.

  11. Carrara Marble: a nomination for Global Heritage Stone Resource

    Science.gov (United States)

    primavori, piero

    2014-05-01

    In the collective memory, in ordinary people, or in any technical office not devoted expressly to stone, marble is automatically associated with the word Carrara (Italy). Indisputably, for decades and decades, there has been this word association: marble means Carrara and Carrara means marble. In few other commodity sectors is a word so automatically associated with a name, engendering an identification process that, despite the inexorable onslaught of globalization, continues to exist. Carrara Marble, probably one of the most famous dimension stone in the world, has been recently designated as a suitable "Global Heritage Stone Resource". The additional designation of "Global Ornamental Stone" has also been proposed. Quarried since pre-Roman times, this marble is the testimonial of an area/industry that was able - for a variety of reasons not easily repeatable in future stone history - from the dawn of the stone sector to trigger a flywheel-effect on a global scale. The term Carrara Marble, geographically referable to the marbles extracted in the sorroundings of Carrara town, is in reality a general one, erroneously used since long time to define a multitude of different marbles (more than two hundred commercial varieties) extracted in the whole Apuane Alps region, Nortwestern Tuscany, Italy. The district of Carrara Marble is part of a wider territory where five important extractive areas can be recognized: Lunigiana, Garfagnana, Versilia, Massa and the Carrara area sensu stricto. This region is approximately 30 km long and 12 km wide, with marble outcrops, useful for commercial purposes, covering over 75 km2. The Carrara Marble is currently excavated in more than 100 quarries, at a rate of about 1.500.000 tons per year, is processed almost everywhere, and sold all over the world. The most important commercial designations are the following: 1) "Marmo Bianco"/"Marmo Ordinario" (Carrara White marble/Ordinary marble); 2) "Marmo Venato" (Veined marble); 3) "Marmo

  12. CATHEDRAL: a fast and effective algorithm to predict folds and domain boundaries from multidomain protein structures.

    Directory of Open Access Journals (Sweden)

    Oliver C Redfern

    2007-11-01

    Full Text Available We present CATHEDRAL, an iterative protocol for determining the location of previously observed protein folds in novel multidomain protein structures. CATHEDRAL builds on the features of a fast secondary-structure-based method (using graph theory to locate known folds within a multidomain context and a residue-based, double-dynamic programming algorithm, which is used to align members of the target fold groups against the query protein structure to identify the closest relative and assign domain boundaries. To increase the fidelity of the assignments, a support vector machine is used to provide an optimal scoring scheme. Once a domain is verified, it is excised, and the search protocol is repeated in an iterative fashion until all recognisable domains have been identified. We have performed an initial benchmark of CATHEDRAL against other publicly available structure comparison methods using a consensus dataset of domains derived from the CATH and SCOP domain classifications. CATHEDRAL shows superior performance in fold recognition and alignment accuracy when compared with many equivalent methods. If a novel multidomain structure contains a known fold, CATHEDRAL will locate it in 90% of cases, with <1% false positives. For nearly 80% of assigned domains in a manually validated test set, the boundaries were correctly delineated within a tolerance of ten residues. For the remaining cases, previously classified domains were very remotely related to the query chain so that embellishments to the core of the fold caused significant differences in domain sizes and manual refinement of the boundaries was necessary. To put this performance in context, a well-established sequence method based on hidden Markov models was only able to detect 65% of domains, with 33% of the subsequent boundaries assigned within ten residues. Since, on average, 50% of newly determined protein structures contain more than one domain unit, and typically 90% or more of these

  13. Glass Cathedral: Gay Novel or Liberation Theology? An Interview with Andrew Koh

    Directory of Open Access Journals (Sweden)

    Angus Whitehead

    2013-05-01

    Full Text Available Singaporean Andrew Koh was a founding member of the groundbreaking Necessary Stage theatre company in 1987. In Singapore he is best remembered as the author of Glass Cathedral (1995, Singapore's second gay novel[la], which won the 1994 Singapore Literature Prize Commendation Award and was subsequently shortlisted for the 1996 Commonwealth Writers Prize for the Best First Novel Regional Awards. A collection of poetry, Hybrid from the East, was published in the UK in 1997. A second novel awaits publication. After initially leaving Singapore for London in the mid-1990s he now lives in Sydney as a healthcare worker and qualified Chinese medicine practitioner. Sixteen years after its initial publication, Glass Cathedral the novel is finally receiving attention and reappraisal in the wake of its Glass Cathedral's republication by Epigram Books as a Singapore Classic, alongside works such as Goh Poh Seng's The Immolation, Robert Yeo's The Adventures of Holden Heng and Lloyd Fernando's Scorpion Orchid. The interview took place on 8 November 2011 at a restaurant on the site of Koh's alma mater St Joseph's Institution, Bras Basah Road, Singapore, just days after Koh returned to the city-state and gave a spirited reading from and talk about Glass Cathedral at the Singapore Writers Festival. In this interview Koh discusses his Catholic upbringing, and his employment as a policeman during Singapore's policy of entrapment of homosexual men during the 1990s. Koh goes on to discuss how he came to write Glass Cathedral, his leaving Singapore in response to the nation-state's repressive climate and unsympathetic response to queer writing. In the second half of the interview Koh discusses homophobia in Singapore, the Catholic Church, and elsewhere and its roots in misogyny. Koh also draws attention to other issues explored in Glass Cathedral: the marginalisation of minorities in a supposedly multicultural nation state and the impact of Singapore's secret history

  14. White Macael marble: a key element in the architectonic heritage of Andalusia for over 25 centuries

    Science.gov (United States)

    Navarro, Rafael; Sol Cruz, Ana; Arriaga, Lourdes; Baltuille, José Manuel

    2013-04-01

    Marble from Macael (Andalusia) is one of the most important natural stones in the architectonic heritage of Andalusia; in particular the variety commercially known as "White Macael". This natural stone has been used outdoors as well as indoors for decorative, ornamental or structural purposes. During the 7th century (B.C.) the Phoenicians began to systematically extract these quarries to be used in their more social important elements such as sarcophagus. During the Roman period this rock had a greater importance in construction; we find columns, pavements, tombstones… in many historical buildings such as the Roman amphitheatre in Mérida (1st century B.C.) and the city of Itálica in Seville (3rd century B.C.). But it is during the Muslim period when marble from Macael is more widely used: the Mosque of Córdoba (8th century), the Lions Court in the Alhambra palace, the Alcazaba in Almería, the Medina-Azahara palace in Córdoba (10th century). Other important buildings using the white marble are: Carlos V palace or the Royal Chapel in Granada (15th century), the Almería cathedral or El Escorial monastery in Madrid (16th century), San Telmo palace in Seville (17th century) or The Royal Palace in Madrid (18th century). Uncountable number of buildings, both historical and contemporary, show different elements made of this marble. From a geological point of view, the quarries are located in the upper part of the Nevado-Filábride Complex, the lowest nappe of the Internal Zones of the Betic Chains. Under the "White Macael" name is also possible to include another commercial denominations such "White Macael Río" or "White Macael Río Veteado". It is a clear white coloured, calcitic marble (up than 97% calcite), with average grain size between 0,16 y 3,2 mm in a mosaic texture with a very homogenous aspect. Regarding the main physical and mechanical properties, this rock has an open porosity value between 0,1-0,6%, bulk density 2,50-2,75 g/cm3, water absorption at

  15. The influence of indoor microclimate on thermal comfort and conservation of artworks: the case study of the cathedral of Matera (South Italy)

    Science.gov (United States)

    Cardinale, Tiziana; Rospi, Gianluca; Cardinale, Nicola; Paterino, Lucia; Persia, Ivan

    2014-05-01

    The Matera Cathedral was built in Apulian-Romanesque style in the thirteenth century on the highest spur of the "Civita" that divides "Sassi" district in two parts. The constructive material is the calcareous stone of the Vaglia, extracted from quarries in the area of Matera. The interior is Baroque and presents several artworks, including: mortars covered with a golden patina, a wooden ceiling, painted canvas and painting frescoes, three minor altars and a major altar of precious white marble, a nativity scene made of local painted limestone. The research had to evaluate the indoor microclimate during and after the restoration works, that also concern the installation of floor heating system to heat the indoor environments. Specifically, we have analyzed the thermal comfort and the effect that the artwork and construction materials inside the Cathedral of Matera have undergone. This evaluation was carried out in two different phases: in the first one we have investigated the state of the art (history of the site, constructive typology and artworks); in the second one we have done a systematic diagnosis and an instrumental one. The analysis were carried out in a qualitative and quantitative way and have allowed us to test indoor microclimatic parameters (air temperature, relative humidity and indoor air velocity), surface temperatures of the envelope and also Fanger's comfort indices (PMV and PPD) according to the UNI EN ISO 7730. The thermal mapping of the wall surface and of the artworks, carried out through thermal imaging camera, and the instrumental measurement campaigns were made both before restoration and after installation of the heating system; in addition measurements were taken with system on and off. The analysis thus made possible to verify that the thermo-hygrometric parameters found, as a result of the recovery operations, meet the limits indicated by the regulations and international studies. In this way, we can affirm that the indoor environment

  16. Colorado Yule Marble; building stone of the Lincoln Memorial

    Science.gov (United States)

    McGee, Elaine S.

    1999-01-01

    The Colorado Yule marble, quarried in Marble, Colo., is a very pure white marble, and it has been widely acclaimed for its quality and purity. This marble has been used for many prominent buildings; one of the most notable is the Lincoln Memorial in Washington, D.C., built nearly 80 years ago. Although most of the marble in the memorial appears to be in very good condition, some of the stones have developed pronounced surficial roughness and show a significant loss of carved details and rounded edges compared with adjacent stones. Because adjacent blocks of marble receive nearly identical exposure to weathering agents that cause deterioration of the marble, it seems very likely that this pronounced difference in durability of adjacent stones arises from some inherent characteristic of the marble. The Colorado Yule marble is a nearly pure calcite marble with minor inclusions of mica, quartz, and feldspar. Compositions of the calcite and the inclusion phases in the marble are typical for those phases. The calcite grains that compose the marble are irregularly shaped and range from 100 to 600 micrometers in diameter. The texture of the marble is even, with a slight preferred directional elongation that is visible when the marble is cut in certain directions. Physical tests of the marble show that its strength is comparable to that of other marbles typically used in buildings. Variations in the durability of the marble, like those seen at the Lincoln Memorial, are not related to variations in calcite composition or to the presence of inclusions in the marble. Most likely, the variations arise from differences in the calcite grain boundaries and the degree to which the grains interlock with one another. Weak grain boundaries that permit water or solutions to penetrate into the marble and dissolve the calcite grains at their edges cause the marble to disaggregate or ?sugar.? Subtle differences in texture that occur in the marble from various parts of the quarry probably

  17. The Constabulus manuscript in Durham Cathedral Library: A Forgotten Treasure?

    Directory of Open Access Journals (Sweden)

    Robinson, Maureen

    2005-06-01

    Full Text Available Johannes Hispalensis (John of Seville, working from Limia in Portugal and then Toledo in twelfth century Spain, translated mostly mathematical treatises from Arabic into Latin. His early work began in Limia with three medical translations c. 1118. One, the De differentia spiritus et animae originally bore the signature 'Johannes Hispalensis et Limiensis'. Not all scholars agree that this translator was Johannes Hispalensis. However, evidence supporting the theory that there was only one translator is provided by the De differentia, which resurfaced years later in a revised version dedicated to Raymond, Archbishop of Toledo from 1125 to 1152. It bore the shortened name: Johannes Hispalensis. An unknown copy of this revised version has been discovered in Durham Cathedral where it has lain dormant for 800 years. It contains a plethora of scribal mistakes, helping to prove that many of the inconsistencies between different copies of the same Latin manuscripts are due to human error rather than multiple identities working on the same translation.

    Johannes Hispalensis (Juan de Sevilla, que trabajó en Limia (Portugal y más tarde en Toledo, en la España del siglo XII, tradujo sobre todo tratados matemáticos del árabe al latín. Sus primeras obras comenzaron en Limia con tres traducciones sobre medicina alrededor del año 1118. Una de ellas, De differentia spiritus et animae, llevó originalmente la firma 'Johannes Hispalensis et Limiensis'. No todos los especialistas en esta época están de acuerdo en que este traductor fuera Johannes Hispalensis, Sin embargo, la obra De differentia aporta pruebas que apoyan la teoría de que hubo un único traductor. Dicha obra reapareció unos años más tarde en una versión revisada y dedicada a Raimundo, el Arzobispo de Toledo, entre 1125 y 1152. Llevaba el nombre abreviado: Johannes Hispalensis. Una copia desconocida de esta versión revisada fue hallada en la catedral de

  18. Greek marbles: determination of provenance by isotopic analysis.

    Science.gov (United States)

    Craig, H; Craig, V

    1972-04-28

    A study has been made of carbon-13 and oxygen-18 variations in Greek marbles from the ancient quarry localities of Naxos, Paros, Mount Hymettus, and Mount Pentelikon. Parian, Hymettian, and Pentelic marbles can be clearly distinguished by the isotopic relationships; Naxian marbles fall into two groups characterized by different oxygen-18/oxygen-16 ratios. Ten archeological samples were also analyzed; the isotopic data indicate that the "Theseion" is made of Pentelic marble and a block in the Treasury of Siphnos at Delphi is probably Parian marble.

  19. Efficiency and resistance of the artificial oxalate protection treatment on marble against chemical weathering

    International Nuclear Information System (INIS)

    Doherty, B.; Pamplona, M.; Selvaggi, R.; Miliani, C.; Matteini, M.; Sgamellotti, A.; Brunetti, B.

    2007-01-01

    The artificial oxalate protection method was analyzed in laboratory experiments in order to achieve an optimum treatment application and concentration giving rise to its most effective protective nature. Spectroscopic (Fourier transform infrared, Micro-Raman and UV-vis colorimetry), microscopic (scanning electron microscope) and contact-angle analyses were carried out to characterize Carrara marble samples before and after application of the treatment to validate its efficiency. The resistance effects against chemical weathering were subsequently observed in a lab-controlled weak acid rain experiment. An acid spray at pH 5.5, representative of normal rain was used to provoke degrade of natural marble, marble treated with the artificial oxalate protective at concentrations of 0.4 and 5% and marble treated with a commercial organic silicon product. Run-off solutions sampled at timely intervals were tested for any change in pH followed by ion chromatography measurements for the presence of calcium ions in solution. The chromatography results of the oxalate treatment applied at a 5% concentration are analogous to an organic commercial product indicating its validity as a method for the conservation of carbonate substrates conferring protection to stone materials against acid environments

  20. Efficiency and resistance of the artificial oxalate protection treatment on marble against chemical weathering

    Energy Technology Data Exchange (ETDEWEB)

    Doherty, B. [Dipartimento di Chimica, Universita degli Studi di Perugia, via Elce di Sotto, 8, I-60123 Perugia (Italy); Pamplona, M. [Centro de Petrologia e Geoquimica do Instituto Superior Tecnico Universidade Tecnica de Lisboa, Avenida Rovisco Pais, 1049-001 Lisbon (Portugal); Selvaggi, R. [Dipartimento di Chimica, Universita degli Studi di Perugia, via Elce di Sotto, 8, I-60123 Perugia (Italy); Miliani, C. [Istituto CNR di Scienze e Tecnologie Molecolari (ISTM), Dipartimento di Chimica, Universita degli Studi di Perugia, via Elce di Sotto, 8, I-60123 Perugia (Italy)]. E-mail: miliani@thch.unipg.it; Matteini, M. [CNR Istituto, Conservazione e Valorizzazione dei Beni Culturali (ICVBC), Via Madonna del Piano, 10, Edifico C-50019, Florence (Italy); Sgamellotti, A. [Dipartimento di Chimica, Universita degli Studi di Perugia, via Elce di Sotto, 8, I-60123 Perugia (Italy); Istituto CNR di Scienze e Tecnologie Molecolari (ISTM), Dipartimento di Chimica, Universita degli Studi di Perugia, via Elce di Sotto, 8, I-60123 Perugia (Italy); Brunetti, B. [Dipartimento di Chimica, Universita degli Studi di Perugia, via Elce di Sotto, 8, I-60123 Perugia (Italy)

    2007-03-15

    The artificial oxalate protection method was analyzed in laboratory experiments in order to achieve an optimum treatment application and concentration giving rise to its most effective protective nature. Spectroscopic (Fourier transform infrared, Micro-Raman and UV-vis colorimetry), microscopic (scanning electron microscope) and contact-angle analyses were carried out to characterize Carrara marble samples before and after application of the treatment to validate its efficiency. The resistance effects against chemical weathering were subsequently observed in a lab-controlled weak acid rain experiment. An acid spray at pH 5.5, representative of normal rain was used to provoke degrade of natural marble, marble treated with the artificial oxalate protective at concentrations of 0.4 and 5% and marble treated with a commercial organic silicon product. Run-off solutions sampled at timely intervals were tested for any change in pH followed by ion chromatography measurements for the presence of calcium ions in solution. The chromatography results of the oxalate treatment applied at a 5% concentration are analogous to an organic commercial product indicating its validity as a method for the conservation of carbonate substrates conferring protection to stone materials against acid environments.

  1. Liquid Marble Coalescence and Triggered Microreaction Driven by Acoustic Levitation.

    Science.gov (United States)

    Chen, Zhen; Zang, Duyang; Zhao, Liang; Qu, Mengfei; Li, Xu; Li, Xiaoguang; Li, Lixin; Geng, Xingguo

    2017-06-27

    Liquid marbles show promising potential for application in the microreactor field. Control of the coalescence between two or among multiple liquid marbles is critical; however, the successful merging of two isolated marbles is difficult because of their mechanically robust particle shells. In this work, the coalescence of multiple liquid marbles was achieved via acoustic levitation. The dynamic behaviors of the liquid marbles were monitored by a high-speed camera. Driven by the sound field, the liquid marbles moved toward each other, collided, and eventually coalesced into a larger single marble. The underlying mechanisms of this process were probed via sound field simulation and acoustic radiation pressure calculation. The results indicated that the pressure gradient on the liquid marble surface favors the formation of a liquid bridge between the liquid marbles, resulting in their coalescence. A preliminary indicator reaction was induced by the coalescence of dual liquid marbles, which suggests that expected chemical reactions can be successfully triggered with multiple reagents contained in isolated liquid marbles via acoustic levitation.

  2. Unusual Rebuilding Method of Historic St Mary's Cathedral in the Capital of Western Australia

    Science.gov (United States)

    Wysokowski, Adam

    2016-06-01

    St Mary's Cathedral is the Archbishop church of the Archdiocese in Perth in Western Australia. The presented sacral building was built in neo-Gothic style during the years 1863-1865. Cathedral was officially dedicated and opened for the service on 29th January, 1865. In 1973 was proclaimed the Marian Sanctuary and now represents one of the largest religious facilities in Perth. In 2005, the city authorities, together with the Archdiocese took a collective decision on the necessity of a comprehensive renovation of this sacred object. The renovation was due to the technical condition and the lack of usability of the object. The author of the paper had the opportunity to experience these problems by visiting this place several times, first time in 1989 and next years. Thus, the renovation of the present Cathedral was in its assumption not only to perform maintenance of the building and its specific architectural elements but also to increase its functional features - usable for the faithful and tourists. Reconstruction of St Mary's Cathedral in Perth can be a good example increasing the wider functionality of such facilities while keeping their antique and historical qualities. In this paper the above-mentioned issues will be more widely developed by the author.

  3. Epiphanic Awakenings in Raymond Carver's "Cathedral" and Alice Walker's "Everyday Use"

    Science.gov (United States)

    Sadeq, Ala Eddin; Al-Badawi, Mohammed

    2016-01-01

    This paper explores how two short stories from very different backgrounds conclude in a significant epiphany for the characters. Raymond Carver's short story "Cathedral" and Alice Walker's "Everyday Use" are studied to see how the husband in Carver's work is blinder than his visually-impaired overnight guest, and the…

  4. Liturgy and Music in Hereford Cathedral in the Time of Queen Victoria and Beyond

    Directory of Open Access Journals (Sweden)

    Tessa Murdoch

    2017-04-01

    Full Text Available The Victorian Gothic Revival and its focus on liturgical neo-medievalism inspired the 1860s restoration of the medieval Hereford Cathedral. In this restoration, the new screen played a central part. Designed by George Gilbert Scott and manufactured by the firm of Francis Skidmore in Coventry, the screen was commissioned in order to re-unite the choir with the nave. The symbolism and colours decorating the screen harmonized with the medieval and later features of the cathedral, including the high altar reredos, organ pipes, and floor tiles. Hereford Cathedral Library preserves historical accounts of the interior and original music manuscripts by Edward Elgar and Frederick Ouseley that illustrate, with the musical inserts provided, the rich tradition of choral music and liturgy which continues to this day with key liturgies and the annual Three Choirs Festival linking Gloucester, Hereford, and Worcester. Memorials and stained-glass windows dedicated to successive precentors embellish the musical vocabulary of the interior. In focusing on the musical culture connected with Hereford Cathedral, this essay seeks to enrich the interpretation of the restored Hereford Screen in its secular setting at the Victoria and Albert Museum, London.

  5. The white marble used in Brasília, a World Heritage and the capital of Brazil

    Science.gov (United States)

    Heloisa Barros de Oliveira Frascá, Maria

    2015-04-01

    Created as the Brazilian capital, in the central western part of Brazil, Brasilia is a definitive example of 20th century modernist urbanism. It was built in only four years, from 1956 to 1960, following the project of urban planner Lucio Costa and architect Oscar Niemeyer that intended that every element - from the layout of the residential and administrative districts (often compared to the shape of a bird in flight) to the symmetry of the buildings themselves - should be in harmony with the city's overall design. This description is from the World Heritage Centre, of Unesco, that nominated Brasilia as a Cultural Heritage Property in 1987. Most of the remarkable buildings designed Oscar Niemeyer, cited by Unesco, are around the Plaza of Three Powers, as the Planalto ("Plateau") Palace, the National Congress, the Supreme Court, the Cathedral, the National Theatre among others. Aside from the worldwide recognition of the architectonic value of these buildings, it is barely mentioned the expressive use of white marble as cladding. Very few are found in the literature about specification criteria, provenance, fixation method and conservation. According to Oscar Niemeyer Foundation, at this moment they know that the stone come from a supplier in the State of Rio de Janeiro. A preliminary research indicated that the marble used in most of Brasilia buildings are from the municipality of Italva, in the northwest of the State of Rio de Janeiro (DRM-RJ, 2012). In a study carried out by DRM-RJ, in 2003, it is mentioned two white marble commercialized as dimension stone in Italva: "Sparkling Marble" (SM) and "Italva White Marble" (IWM), respectively dolomite-calcite marble and dolomite marble. Their main characteristics are: bulk specific gravity: 2,792 kg/m3 (SM) and 2,852kg/m3 (IWM); water absorption: 0.08 % (SM) and 0.10 % (IWM); uniaxial compression strength: 84.3 MPa (SM) and 88.2 MPa (IWM); modulus of rupture: 9.92 MPa (SM) and 8.75 MPa (IWM); coefficient of linear

  6. Dating implications from solar bleaching of thermoluminescence of ancient marble

    International Nuclear Information System (INIS)

    Liritzis, I.; Galloway, R.B.

    1999-01-01

    Measurements of Thermoluminescence (TL) from Greek marble quarried at Paros, Naxos, Pendeli, Hymitos, Thassos, which have been known since ancient time are presented. The results concern i) the solar bleaching of TL, ii) the solar transmission through marble thicknesses up to 16 mm, and iii) the implications for potential dating of ancient carbed marble monuments/objects. The bleaching rate for marbles is very fast during the first hour of exposure. The solar penetration is at least 35 mm for long exposures. Beyond the 2 mm marble slab for exposure times 90-120 hours of sunshine, the residual bleached TL level is not reached. The bleached TL reaches a plateau which serves as the 'zero time' upon which the archaeological TL dose subsequently builds up and gives the age of a marble monument. (author)

  7. Investigation of Turkish marbles as shielding materials

    International Nuclear Information System (INIS)

    Atasoy, H.; Tarcan, G.; Doekmen, S.

    1992-01-01

    The natural Turkish marbles, especially Usak Green (UG), Aegean Purple (AP), and Marmara White (MW) were tested as shielding materials using standard gamma sources such as Co-60, Cs-137 and Eu-152. The experiment showed that UG, AP and MW are very effective shields against gamma-rays. The result for this experiment is that the gamma-ray attenuation coefficients of UG, AP and MW are almost equal for the energy range from 0.1 MeV to 1.4 MeV. Also, the elemental compositions of the natural UG, AP and MW marbles have been determined by fast and thermal neutron activation analysis and fourteen elements including Na, Mg, Al, Si, Cl, K, Ca, V, Ti, Mn, Fe, La, Ba and Sc have been found using the gamma spectroscopic method. The range of element contents of all Turkish marbles are remarkably different, but most of the elements are common such as Ca, Fe, Na, Cl, Mg, Si. (orig.)

  8. Anciet marble quarries in Lesvos island Greece

    Science.gov (United States)

    Mataragkas, M.; Mataragkas, D.

    2009-04-01

    ANCIENT MARBLE QUARRIES IN LESBOS ISLAND, GREECE Varti- Matarangas M.1 & Matarangas D. 1 Institute of Geological and Mining Exploration (IGME), Olympic Village, Entrance C, ACHARNAE 13677, GREECE myrsini@igme.gr , myrsini@otenet.g r A B S T R A C T Ten ancient marble quarries of Lesbos Island, most of them previously unknown, have been studied, in the frame of the research study on the ancient marble quarries in the Aegean Sea. In the present paper the geological, petrological and morphological features of the aforementioned quarries are examined. Concerning the six ancient quarries located in the areas of Tarti, Agia Paraskevi (Tsaf), Mageiras, Loutra, Latomi (Plomari) and Thermi, the authochthonous neopaleozoic unit constitutes their geological formation, while their hosting lithological formations are the included crystalline limestone lens like beds. In two ancient quarries in the areas Moria and Alyfanta, the geological formation is the authochthonous upper Triassic series and the hosting lithological formation the upper Triassic carbonate sequence, while in the areas of Akrasi-Abeliko and Karyni, the geological formation is the thrust Triassic unit and the lithological hosting formations are the included strongly deformed or not crystalline limestone lenticular beds. Furthermore, the petrographic features were also determined permitting the identification of the building stones that have been used.

  9. FROM VIRTUAL TO MATERIAL RESTORATION. A PROPOSAL FOR THE REASSEMBLY OF THE ALTAR OF THE HOLY HEART OF MARY IN THE CATHEDRAL OF SANTA MARIA ASSUNTA IN GERACE (REGGIO CALABRIA, ITALY

    Directory of Open Access Journals (Sweden)

    F. Prampolini

    2017-05-01

    Full Text Available The present study explores the relationship between the new frontiers of architectural survey and architectural restoration. The result is a project for the reassembly of the Altar of the Holy Heart of Mary in the Cathedral of Gerace, in the province of Reggio Calabria. It was dismantled in the last century with the purpose to restore the “solemn and sober aspect” of the church during the medieval age. The idea was born in the sphere of a multidisciplinary didactic experience, which involved history, conservation, digital modelling, design and enhancement of cultural heritage. The process, from analyses to project, followed four steps: realization of a systematic photogrammetrical survey of each architectural element of the 18th century altars of the cathedral, which were dismantled in the last century, with high precision photomodelling techniques; early identification of the single objects, positioning structured QR-CODE with metadata and short description directly in the shooting phase; pre-cataloguing phase, implemented by the compilation of single cards regarding each piece, using a redrafted version of the ICCD OA card (artwork 3.00 version; a proposal for the reassembly of the altar of the Holy Heart of Mary. The reassembly is conceived as an alternative to the reconstruction of the altar “as it was”, using a steel structure that is partially visible, which was studied to support and “exhibit” the marble pieces. The availability of numerical models for each piece facilitated, on one side, weight distribution analysis and, consequently, correct dimensioning of the support structure and, on the other side, interactive simulation processes for design optimisation and aesthetic evaluation.

  10. From Virtual to Material Restoration. a Proposal for the Reassembly of the Altar of the Holy Heart of Mary in the Cathedral of Santa Maria Assunta in Gerace (reggio Calabria, Italy)

    Science.gov (United States)

    Prampolini, F.; Oteri, A. M.; Caporale, S.; Mazzeo, S.; Muscherà, F.

    2017-05-01

    The present study explores the relationship between the new frontiers of architectural survey and architectural restoration. The result is a project for the reassembly of the Altar of the Holy Heart of Mary in the Cathedral of Gerace, in the province of Reggio Calabria. It was dismantled in the last century with the purpose to restore the "solemn and sober aspect" of the church during the medieval age. The idea was born in the sphere of a multidisciplinary didactic experience, which involved history, conservation, digital modelling, design and enhancement of cultural heritage. The process, from analyses to project, followed four steps: realization of a systematic photogrammetrical survey of each architectural element of the 18th century altars of the cathedral, which were dismantled in the last century, with high precision photomodelling techniques; early identification of the single objects, positioning structured QR-CODE with metadata and short description directly in the shooting phase; pre-cataloguing phase, implemented by the compilation of single cards regarding each piece, using a redrafted version of the ICCD OA card (artwork 3.00 version); a proposal for the reassembly of the altar of the Holy Heart of Mary. The reassembly is conceived as an alternative to the reconstruction of the altar "as it was", using a steel structure that is partially visible, which was studied to support and "exhibit" the marble pieces. The availability of numerical models for each piece facilitated, on one side, weight distribution analysis and, consequently, correct dimensioning of the support structure and, on the other side, interactive simulation processes for design optimisation and aesthetic evaluation.

  11. Mineralogical and chemical characteristics of marble of Bela Pola deposite

    International Nuclear Information System (INIS)

    Shijakova-Ivanova, Tena; Boev, Blazho; Panov, Zoran; Pavlov, Dejan

    2009-01-01

    This paper presents mineralogical characteristics of marbles from the Bela Pola deposit. We have made mineralogical-chemical analyses of marbles and associated minerals in them. The investigation was carried out at the Faculty of natural and technical sciences - Shtip. Marbles from Bela Pola are dolomite and dolomite-calcite types. Microscope investigations have shown that marbles from Bela Pola have granoblastic structure but at some places it can be found with porphyroblastic structures. Percentage on calcite and dolomite is: 94.08% dolomite, 6.25% is calcite in white marbles. On the other hand calcite is present with 93% in gray marbles. Except dolomite and calcite also appear the following accessoring minerals: quartz, fluorite, corundum and paragonite. In general, after summarizing all the facts, which have resulted from this research we could say that, the Bela Pola marbles are massive, compact and white with high quality. In accordance to all formerly mentioned features, this marbles can be classified in the commercial group of marbles suitable for external application or internal design

  12. High level waste forms: glass marbles and thermal spray coatings

    International Nuclear Information System (INIS)

    Treat, R.L.; Oma, K.H.; Slate, S.C.

    1982-01-01

    A process that converts high-level waste to glass marbles and then coats the marbles has been developed at Pacific Northwest Laboratory (PNL) under sponsorship of the US Department of Energy. The process consists of a joule-heated glass melter, a marble-making device based on a patent issued to Corning Glass Works, and a coating system that includes a plasma spray coater and a marble tumbler. The process was developed under the Alternative Waste Forms Program which strived to improve upon monolithic glass for immobilizing high-level wastes. Coated glass marbles were found to be more leach-resistant, and the marbles, before coating were found to be very homogeneous, highly impact resistant, and conductive to encapsulation in a metal matric for improved heat transfer and containment. Marbles are also ideally suited for quality assurance and recycling. However, the marble process is more complex, and marbles require a larger number of canisters for waste containment and have a higher surface area than do glass monoliths

  13. The Sicilian Architect Tommaso Maria Napoli and the Baroque Cathedral of Dubrovnik

    Directory of Open Access Journals (Sweden)

    Horvat-Levaj, Katarina

    2015-02-01

    Full Text Available The design of the Dubrovnik Cathedral (1671-1713 – a monumental three-nave basilica with a dome over the crossing – was commissioned, thanks to Abbot Stjepan Gradić, from the Roman architect Andrea Bufalini. Among the leaders of construction, which lasted for over four decades, the Sicilian architect Tommaso Maria Napoli stands out. During his nine-year stay in Dubrovnik (1689-98 he was the only one who engaged in radical changes in the design. Through his changes to the vaulting and lighting of the main nave and sanctuary, as well as the introduction of terraces above the side chapels, he gave the building better proportions, and moreover he balanced its volume by enriching the Cathedral with the plastic expressiveness characteristic of Sicilian architecture at that time. Napoli was the only architect involved in the construction of the Dubrovnik Cathedral who had an international reputation, from his native Sicily, to Naples, Rome, and the Habsburg Monarchy. This makes his inventive corrections to Bufalini's design even more significant.

  14. Evaluation of hydrophobic treatments applied to stones used in andalusian cathedrals. III.-Accelerated weathering test with polluted atmosphere

    Directory of Open Access Journals (Sweden)

    Villegas Sánchez, R.

    1993-12-01

    Full Text Available SUMMARY In this work we study the weathering resistance of samples of five types of stone used in Andalusian Cathedrals, treated with six water repellent products, by subjecting the samples to a SO2 polluted atmosphere. To evaluate the alteration of the samples, besides visual observation of macroscopic aspect, changes in weight and the quantity of sulfate that remains on the surface have been measured. Also properties related with water have been measured after the test to determine if there have been any changes in the hydrophobic characteristics.

    En el presente artículo se estudia el comportamiento de muestras de cinco tipos de piedra utilizados en catedrales andaluzas, tratadas con seis productos hidrófugos, sometiéndolas a un ensayo acelerado de alteración en atmósfera contaminada con SO2 . Para evaluar la alteración, además de la observación visual de las manifestaciones macroscópicas, se ha medido la variación de peso de las muestras expuestas y la cantidad de sulfato que permanece en la superficie tras el ensayo. Así mismo, se han detectado los cambios experimentados en las propiedades hidrófugas conferidas por los tratamientos, mediante la medida de propiedades relacionadas con el movimiento del agua.

  15. Integration of constrained electrical and seismic tomographies to study the landslide affecting the cathedral of Agrigento

    International Nuclear Information System (INIS)

    Capizzi, P; Martorana, R

    2014-01-01

    The Cathedral of Saint Gerland, located on the top of the hill of Agrigento, is an important historical church, which dates back to the Arab–Norman period (XI century). Unfortunately throughout its history the Cathedral and the adjacent famous Archaeological Park of the ‘Valley of the Temples’ have been affected by landslides. In this area the interleaving of calcarenites, silt, sand and clay is complicated by the presence of dislocated rock blocks and cavities and by a system of fractures partly filled with clay or water. Integrated geophysical surveys were carried out on the north side of the hill, on which the Cathedral of Agrigento is founded, to define lithological structures involved in the failure process. Because of the landslide, the cathedral has been affected by fractures, which resulted in the overall instability of the structure. Along each of four footpaths a combination of 2D electrical resistivity tomographies (ERT) and 2D seismic refraction tomographies (SRT) was performed. Moreover, along two of these footpaths microtremor (HVSR) and surface wave soundings (MASW) were carried out to reconstruct 2D sections of shear waves velocity. Furthermore a 3D electrical resistivity tomography was carried out in a limited area characterized by gentle slopes. After a preliminary phase, in which the data were processed independently, a subsequent inversion of seismic and electrical data was constrained with stratigraphic information obtained from geognostic continuous core boreholes located along the geophysical lines. This process allowed us to significantly increase the robustness of the geophysical models. The acquired data were interpolated to construct 3D geophysical models of the electrical resistivity and of the P-wave velocity. The interpolation algorithm took into account the average direction and immersion of geological strata. Results led to a better understanding of the complexity of the subsoil in the investigated area. The use of integrated

  16. Paleoseismic study of the Cathedral Rapids fault in the northern Alaska Range near Tok, Alaska

    Science.gov (United States)

    Koehler, R. D.; Farrell, R.; Carver, G. A.

    2010-12-01

    The Cathedral Rapids fault extends ~40 km between the Tok and Robertson River valleys and is the easternmost fault in a series of active south-dipping imbricate thrust faults which bound the northern flank of the Alaska Range. Collectively, these faults accommodate a component of convergence transferred north of the Denali fault and related to the westward (counterclockwise) rotation of the Wrangell Block driven by relative Pacific/North American plate motion along the eastern Aleutian subduction zone and Fairweather fault system. To the west, the system has been defined as the Northern Foothills Fold and Thrust Belt (NFFTB), a 50-km-wide zone of east-west trending thrust faults that displace Quaternary deposits and have accommodated ~3 mm/yr of shortening since latest Pliocene time (Bemis, 2004). Over the last several years, the eastward extension of the NFFTB between Delta Junction and the Canadian border has been studied by the Alaska Division of Geological & Geophysical Surveys to better characterize faults that may affect engineering design of the proposed Alaska-Canada natural gas pipeline and other infrastructure. We summarize herein reconnaissance field observations along the western part of the Cathedral Rapids fault. The western part of the Cathedral Rapids fault extends 21 km from Sheep Creek to Moon Lake and is characterized by three roughly parallel sinuous traces that offset glacial deposits of the Illinoian to early Wisconsinan Delta glaciations and the late Wisconsinan Donnelly glaciation, as well as, Holocene alluvial deposits. The northern trace of the fault is characterized by an oversteepened, beveled, ~2.5-m-high scarp that obliquely cuts a Holocene alluvial fan and projects into the rangefront. Previous paleoseismic studies along the eastern part of the Cathedral Rapids fault and Dot “T” Johnson fault indicate multiple latest Pleistocene and Holocene earthquakes associated with anticlinal folding and thrust faulting (Carver et al., 2010

  17. IMPACT OF MARBLE MINING ON SOIL PROPERTIES IN A PART ...

    African Journals Online (AJOL)

    Dr Osondu

    Ethiopian Journal of Environmental Studies and Management Vol. 4 No.2 2011 ... The effects of marble mining activities on the properties of soils of Igbeti marble area, Oke-Ogun,. Southwestern Nigeria .... 45´ and 4º 15´E in Olorunsogo Local.

  18. Consolidated waste forms: glass marbles and ceramic pellets

    International Nuclear Information System (INIS)

    Treat, R.L.; Rusin, J.M.

    1982-05-01

    Glass marbles and ceramic pellets have been developed at Pacific Northwest Laboratory as part of the multibarrier concept for immobilizing high-level radioactive waste. These consolidated waste forms served as substrates for the application of various inert coatings and as ideal-sized particles for encapsulation in protective matrices. Marble and pellet formulations were based on existing defense wastes at Savannah River Plant and proposed commercial wastes. To produce marbles, glass is poured from a melter in a continuous stream into a marble-making device. Marbles were produced at PNL on a vibratory marble machine at rates as high as 60 kg/h. Other marble-making concepts were also investigated. The marble process, including a lead-encapsulation step, was judged as one of the more feasible processes for immobilizing high-level wastes. To produce ceramic pellets, a series of processing steps are required, which include: spray calcining - to dry liquid wastes to a powder; disc pelletizing - to convert waste powders to spherical pellets; sintering - to densify pellets and cause desired crystal formation. These processing steps are quite complex, and thereby render the ceramic pellet process as one of the least feasible processes for immobilizing high-level wastes

  19. Use of Waste Marble Dust for Stabilization of Clayey Soil

    Directory of Open Access Journals (Sweden)

    Altug SAYGILI

    2015-11-01

    Full Text Available The main objective of this research is to investigate the possibility of utilizing waste marble dust in stabilizing problematic soils (especially swelling clays. The research work was divided into two sections. The first section deals with the shear strength parameters and swelling characteristics, the second section deals with the microstructural investigation of the improved problematic soils. The marble dust addition ratios which have been studied were 0 %, 5 %, 10 %, 20 % and 30 % by weight. Physical, mechanical and chemical properties of soil and marble dust samples were investigated. In addition, SEM analyses were performed on the specimens. Test results indicate that marble dust addition improved the shear strength parameters and reduced the swell potential of the tested clay samples. Marble dust had a noticeable role in the hydration process because of high calcium content. Obtained results showed that marble dust addition to the clay samples will reduce the cost of constructing structures on problematic soils, and finding new utilization areas for waste marble dust will decrease environmental pollution. Utilizing waste marble dust materials in problematic soils will have great contribution to the economy and conservation of resources.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.11966

  20. Blue Marble Space Institute essay contest

    Science.gov (United States)

    Wendel, JoAnna

    2014-04-01

    The Blue Marble Space Institute of Science, based in Seattle, Wash., is inviting college students to participate in its essay contest. Essays need to address the question, "In the next 100 years, how can human civilization prepare for the long-term changes to the Earth system that will occur over the coming millennium?" According to the institute, the purpose of the contest is "to stimulate creative thinking relating to space exploration and global issues by exploring how changes in the Earth system will affect humanity's future."

  1. Thermal behaviour of selected Czech marble samples

    Czech Academy of Sciences Publication Activity Database

    Plevová, Eva; Kožušníková, Alena; Vaculíková, Lenka; Simha Martynková, G.

    2010-01-01

    Roč. 101, č. 2 (2010), s. 657-664 ISSN 1388-6150. [Conference on Calorimetry and Thermal Analysis /10./. Zakopane, 30.08.2009-03.09.2009] R&D Projects: GA ČR GP105/07/P416; GA ČR GA105/08/1398 Institutional research plan: CEZ:AV0Z30860518 Keywords : TMA * anisotropy * optical microscopy * marbles Subject RIV: DB - Geology ; Mineralogy Impact factor: 1.752, year: 2010 http://www.springerlink.com/content/l47881208wk471t1/fulltext.pdf

  2. Performance Evaluation of Concrete using Marble Mining Waste

    Science.gov (United States)

    Kore, Sudarshan Dattatraya; Vyas, A. K.

    2016-12-01

    A huge amount waste (approximately 60%) is generated during mining and processing in marble industries. Such waste can be best utilized in infrastructure development works. Coarse aggregate 75% by weight was replaced by aggregate obtained from marble mining waste. The impact of marble waste as a partial replacement for conventional coarse aggregate on the properties of concrete mixes such as workability, compressive strength, permeability, abrasion, etc. was evaluated. The test results revealed that the compressive strength was comparable to that of control concrete. Other properties such as workability of concrete increased, water absorption reduced by 17%, and resistance to abrasion was marginally increased by 2% as compared to that of control concrete. Ultrasonic pulse velocity and FTIR results show improvement in quality of concrete with crushed marble waste. From the TGA analysis it was confirmed that, aggregate produced from marble waste shows better performance under elevated temperature than that of conventional aggregates.

  3. Strength and deformation behaviors of veined marble specimens after vacuum heat treatment under conventional triaxial compression

    Science.gov (United States)

    Su, Haijian; Jing, Hongwen; Yin, Qian; Yu, Liyuan; Wang, Yingchao; Wu, Xingjie

    2017-10-01

    The mechanical behaviors of rocks affected by high temperature and stress are generally believed to be significant for the stability of certain projects involving rocks, such as nuclear waste storage and geothermal resource exploitation. In this paper, veined marble specimens were treated to high temperature treatment and then used in conventional triaxial compression tests to investigate the effect of temperature, confining pressure, and vein angle on strength and deformation behaviors. The results show that the strength and deformation parameters of the veined marble specimens changed with the temperature, presenting a critical temperature of 600 °C. The triaxial compression strength of a horizontal vein (β = 90°) is obviously larger than that of a vertical vein (β = 0°). The triaxial compression strength, elasticity modulus, and secant modulus have an approximately linear relation to the confining pressure. Finally, Mohr-Coulomb and Hoek-Brown criteria were respectively used to analyze the effect of confining pressure on triaxial compression strength.

  4. Liquid Marbles: From Industrial to Medical Applications

    Directory of Open Access Journals (Sweden)

    Roxana-Elena Avrămescu

    2018-05-01

    Full Text Available Liquid marbles are versatile structures demonstrating a pseudo-Leidenfrost wetting regime formed by encapsulating microscale volumes of liquid in a particle shell. The liquid core is completely separated from the exterior through air pockets. The external phase consists of hydrophobic particles, in most cases, or hydrophilic ones distributed as aggregates. Their interesting features arise from the double solid-fluid character. Thus, these interesting formations, also known as “dry waters”, have gained attention in surface science. This review paper summarizes a series of proposed formulations, fabrication techniques and properties, in correlation with already discovered and emerging applications. A short general review of the surface properties of powders (contact angle, superficial tension is proposed, followed by a presentation of liquid marbles’ properties (superficial characteristics, elasticity, self-propulsion etc.. Finally, applications of liquid marbles are discussed, mainly as helpful and yet to be exploited structures in the pharmaceutical and medical field. Innovative pharmaceutical forms (Pickering emulsions are also means of use taken into account as applications which need further investigation.

  5. The transmission of masticatory forces and nasal septum: structural comparison of the human skull and Gothic cathedral.

    Science.gov (United States)

    Hilloowala, Rumy; Kanth, Hrishi

    2007-07-01

    This study extrapolates the transmission of masticatory forces to the cranium based on the architectural principles of Gothic cathedrals. The most significant finding of the study, obtained by analysis of coronal CT scans, is the role of the hard palate, and especially the vomer and the perpendicular plate of the ethmoid in masticatory force transmission. The study also confirms, experimentally, the paths of masticatory forces, cited in literature but based purely on morphological observations. Human skulls and Gothic cathedrals have similar morphological and functional characteristics. The load exerted by the roof of the cathedral is transmitted to the ground by piers and buttresses. These structures also resist the shearing forces exerted by high winds. Similarly, the mid-facial bones of the skull transmit the vertical as well as the lateral masticatory forces from the maxillary dentition to the skull base. The nonload bearing walls and stained glass windows of the cathedral correspond to the translucent wall of the maxilla. The passageway between the aisle and the nave of the cathedral is equivalent to the meatal openings in the lateral wall of the nasal cavity.

  6. Cathedral outreach: student-led workshops for school curriculum enhancement in non-traditional environments

    Science.gov (United States)

    Posner, Matthew T.; Jantzen, Alexander; van Putten, Lieke D.; Ravagli, Andrea; Donko, Andrei L.; Soper, Nathan; Wong, Nicholas H. L.; John, Pearl V.

    2017-08-01

    Universities in the United Kingdom have been driven to work with a larger pool of potential students than just the more traditional student (middle-class white male), in order to tackle the widely-accepted skills-shortage in the fields of science, technology, engineering and mathematics (STEM), whilst honoring their commitment to fair access to higher education. Student-led outreach programs have contributed significantly to this drive. Two such programs run by postgraduate students at the University of Southampton are the Lightwave Roadshow and Southampton Accelerate!, which focus on photonics and particle physics, respectively. The program ambassadors have developed activities to enhance areas of the national curriculum through presenting fundamental physical sciences and their applications to optics and photonics research. The activities have benefitted significantly from investment from international organizations, such as SPIE, OSA and the IEEE Photonics Society, and UK research councils, in conjunction with university recruitment and outreach strategies. New partnerships have been formed to expand outreach programs to work in non-traditional environments to challenge stereotypes of scientists. This paper presents two case studies of collaboration with education learning centers at Salisbury Cathedral and Winchester Cathedral. The paper outlines workshops and shows developed for pupils aged 6-14 years (UK key stages 2-4) on the electromagnetic spectrum, particle physics, telecommunications and the human eye using a combination of readily obtainable items, hand-built kits and elements from the EYEST Photonics Explorer kit. The activities are interactive to stimulate learning through active participation, complement the UK national curriculum and link the themes of science with the non-traditional setting of a cathedral. We present methods to evaluate the impact of the activity and tools to obtain qualitative feedback for continual program improvement. We also

  7. The Toledo Cartulary, Capitulary Library of Toledo, 42-20 (1190 and its Contribution to the History of Toledo Cathedral

    Directory of Open Access Journals (Sweden)

    Ruth Miguel Franco

    2017-12-01

    Full Text Available The Toledo cartulary, Capitulary Library of Toledo, 42-40 (1190, is the oldest cartulary produced in Toledo Cathedral. It may also be considered an example of a cartulary-chronicle, as this volume not only includes royal, ecclesiastical and private documents relative to the institution (?, but it also includes some pieces of writing that contextualize the copied documents by relating them either to historical events, or to the Cathedral itself and to other assets or documents. The aim of this article is to analyze the construction of this cartulary and the mechanisms that it uses to transform individual documents into an account of the institutional history of Toledo Cathedral, focusing on the privileges of the mensa capitularis.

  8. CATHEDRAL BASIC EDUCATIONAL INSTITUTIONS AS A BASIS FOR FORMING TECHNOLOGY TEACHER COMPETENCE

    Directory of Open Access Journals (Sweden)

    В. М. Жураковская

    2014-04-01

    Full Text Available The article offers a review of the activities of the cathedral basic educational institutions (KBOU - Lyceum Istra, Moscow region, which implements one of the scientific and methodological areas of activity - the introduction of new educational technologies and principles of the organization of the educational process to ensure effective implementation of key provisions of the federal state educational standards basic general education. The paper proposed a structure of didactic games and one of its examples, focused on becoming a high school student individuality.Purchase on Elibrary.ru > Buy now

  9. Effect of Thermal Environment on the Mechanical Behaviors of Building Marble

    Directory of Open Access Journals (Sweden)

    Haijian Su

    2018-01-01

    Full Text Available High temperature and thermal environment can influence the mechanical properties of building materials worked in the civil engineering, for example, concrete, building rock, and steel. This paper examines standard cylindrical building marble specimens (Φ50 × 100 mm that were treated with high temperatures in two different thermal environments: vacuum (VE and airiness (AE. Uniaxial compression tests were also carried out on those specimens after heat treatment to study the effect that the thermal environment has on mechanical behaviors. With an increase in temperature, the mechanical behavior of marble in this study indicates a critical temperature of 600°C. Both the peak stress and elasticity modulus were larger for the VE than they were for the AE. The thermal environment has an obvious influence on the mechanical properties, especially at temperatures of 450∼750°C. The failure mode of marble specimens under uniaxial compression is mainly affected by the thermal environment at 600°C.

  10. The Puzzle of a Marble in a Spinning Pipe

    Science.gov (United States)

    2015-05-01

    MAY 2015 2. REPORT TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE The Puzzle of a Marble in a Spinning Pipe 5a. CONTRACT...Approved for public release; distribution unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT What trajectory does a marble follow if it is held...298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Physics Education 50 (3) 279 1. Problem statement A marble is placed one-third of the length along a

  11. Determination of marble provenance: limits of isotopic analysis

    International Nuclear Information System (INIS)

    Germann, K.; Holzmann, G.; Winkler, F.J.

    1980-01-01

    Provenance determination of Thessalian stelae marbles using the C/O isotopic analysis proved to be misleading, as the isotopic composition even in very small quarrying areas is heterogeneous and isotopic coincidence of marbles from very distant sources occurs. Therefore additional geological features must be taken into consideration and preference should be given to combinations of both petrographical and geochemical properties. Geological field work to establish the range of possible marble sources and the variability within these sources is one of the prerequisites of provenance studies. (author)

  12. Pressure Stimulated Currents (PSCin marble samples

    Directory of Open Access Journals (Sweden)

    F. Vallianatos

    2004-06-01

    Full Text Available The electrical behaviour of marble samples from Penteli Mountain was studied while they were subjected to uniaxial stress. The application of consecutive impulsive variations of uniaxial stress to thirty connatural samples produced Pressure Stimulated Currents (PSC. The linear relationship between the recorded PSC and the applied variation rate was investigated. The main results are the following: as far as the samples were under pressure corresponding to their elastic region, the maximum PSC value obeyed a linear law with respect to pressure variation. In the plastic region deviations were observed which were due to variations of Young s modulus. Furthermore, a special burst form of PSC recordings during failure is presented. The latter is emitted when irregular longitudinal splitting is observed during failure.

  13. Blue Marble: Remote Characterization of Habitable Planets

    Science.gov (United States)

    Woolf, Neville; Lewis, Brian; Chartres, James; Genova, Anthony

    2009-01-01

    The study of the nature and distribution of habitable environments beyond the Solar System is a key area for Astrobiology research. At the present time, our Earth is the only habitable planet that can be characterized in the same way that we might characterize planets beyond the Solar System. Due to limitations in our current and near-future technology, it is likely that extra-solar planets will be observed as single-pixel objects. To understand this data, we must develop skills in analyzing and interpreting the radiation obtained from a single pixel. These skills must include the study of the time variation of the radiation, and the range of its photometric, spectroscopic and polarimetric properties. In addition, to understand whether we are properly analyzing the single pixel data, we need to compare it with a ground truth of modest resolution images in key spectral bands. This paper discusses the concept for a mission called Blue Marble that would obtain data of the Earth using a combination of spectropolarimetry, spectrophotometry, and selected band imaging. To obtain imagery of the proper resolution, it is desirable to place the Blue Marble spacecraft no closer than the outer region of cis-lunar space. This paper explores a conceptual mission design that takes advantage of low-cost launchers, bus designs and mission elements to provide a cost effective observing platform located at one of the stable Earth-moon Lagrangian points (L4, L5). The mission design allows for the development and use of novel technologies, such as a spinning moon sensor for attitude control, and leverages lessons-learned from previous low-cost spacecraft such as Lunar Prospector to yield a low-risk mission concept.

  14. Characterization of material composite marble-polyester

    Directory of Open Access Journals (Sweden)

    Corpas, F. A.

    2002-12-01

    Full Text Available In this work we characterize a new material composite, formed with a polyester and crushed white marble mixture. The final purpose is double: to obtain a material for applications sufficiently competitive after an economic viability study, increasing the yield of the main commodity, using waste marble and improving the jobs in the quarries area. From the results obtained, we deduce then that this material could be used to inside and outside adornment.

    En este trabajo, caracterizamos un nuevo material compuesto, formado con una mezcla de poliéster y de mármol blanco triturado. El propósito final es doble: por un lado obtener un material para aplicaciones lo suficientemente competitivas como para que se pueda iniciar un estudio económico de viabilidad, aumentando el rendimiento de la materia prima y mejorando las salidas laborales de las comarcas extractoras. Para la caracterización del material se ha determinado el porcentaje adecuado de poliéster. Así como las propiedades mecánicas (flexión, compresión y dureza, químicas, fatiga térmica y su influencia a la exposición solar In order to characterized of material, we have determined the suitable porcentage of polyester Also we have carried out a study of the mechanical (stretching, resistance to traction, hardeness and thermal fatigue chemicals properties and solar radiation influence. De los resultados obtenidos, este material podría ser utilizado para ornamentación tanto de interior como de exterior.

  15. Black manganese-rich crusts on a Gothic cathedral

    Science.gov (United States)

    Macholdt, Dorothea S.; Herrmann, Siegfried; Jochum, Klaus Peter; Kilcoyne, A. L. David; Laubscher, Thomas; Pfisterer, Jonas H. K.; Pöhlker, Christopher; Schwager, Beate; Weber, Bettina; Weigand, Markus; Domke, Katrin F.; Andreae, Meinrat O.

    2017-12-01

    Black manganese-rich crusts are found worldwide on the façades of historical buildings. In this study, they were studied exemplarily on the façade of the Freiburger Münster (Freiburg Minster), Germany, and measured in-situ by portable X-ray fluorescence (XRF). The XRF was calibrated to allow the conversion from apparent mass fractions to Mn surface density (Mn mass per area), to compensate for the fact that portable XRF mass fraction measurements from thin layers violate the assumption of a homogeneous measurement volume. Additionally, 200-nm femtosecond laser ablation-inductively coupled plasma-mass spectrometry (fs LA-ICP-MS) measurements, scanning transmission X-ray microscopy-near edge X-ray absorption fine structure spectroscopy (STXM-NEXAFS), Raman spectroscopy, and imaging by light microscopy were conducted to obtain further insight into the crust material, such as potential biogenic contributions, element distributions, trace element compositions, and organic functional groups. While black crusts of various types are present at many places on the minster's facade, crusts rich in Mn (with a Mn surface density >150 μg cm-2) are restricted to a maximum height of about 7 m. The only exceptions are those developed on the Renaissance-Vorhalle (Renaissance Portico) at a height of about 8 m. This part of the façade had been cleaned and treated with a silicon resin as recently as 2003. These crusts thus accumulated over a period of only 12 years. Yet, they are exceptionally Mn-rich with a surface density of 1200 μg cm-2, and therefore require an accumulation rate of about 100 μg cm-2 Mn per year. Trace element analyses support the theory that vehicle emissions are responsible for most of the Mn supply. Lead, barium, and zinc correlate with manganese, indicating that tire material, brake pads, and resuspended road dust are likely to be the element sources. Microscopic investigations show no organisms on or in the Mn-rich crusts. In contrast, Mn-free black

  16. Population genetic diversity of marble goby (Oxyeleotris marmoratus ...

    Indian Academy of Sciences (India)

    Cheng Zhao

    2017-12-08

    Dec 8, 2017 ... Indian Academy of Sciences. ONLINE ... east Asia, especially in Malaysia, Singapore, Thailand and. Vietnam (Inger and ... cial culture of marble goby has suffered from germplasm degradation ..... Southeast Asia. Through ...

  17. Characterization of marble waste for manufacture of artificial stone

    International Nuclear Information System (INIS)

    Aguiar, M.C.; Silva, A.G.P.

    2016-01-01

    This work aims to study the characterization of marble waste for the manufacture of artificial stone. The characterization of the waste was performed through X-ray fluorescence, X-ray diffraction, particle size distribution, scanning electron microscopy and confocal microscopy. The results indicated that the marble waste presents typical composition of a dolomite, calcite marble, and their minerals are: Calcite (CaCO_3) and dolomite (MgCa (CO_3)_2. The waste presented predominance of particles below 200 mesh screen. This may be interesting for the production of artificial stone better visual appearance, such as marmoglass, for example. The results indicate that the use of marble waste for production of artificial stone is feasible and environmentally friendly alternative to give a destination for this waste generated in the order of millions of tons representing serious environmental problem. (author)

  18. Terrestrial laser scanning for heritage conservation: the Cologne Cathedral documentation project

    Science.gov (United States)

    Pritchard, D.; Sperner, J.; Hoepner, S.; Tenschert, R.

    2017-08-01

    Contemporary terrestrial laser scanners and photogrammetric imaging systems are an invaluable tool in providing objectively precise, as-built records of existing architectural, engineering and industrial sites. The comprehensive three-dimensional (3D) recording of culturally important sites such as heritage buildings, monuments, and sites can serve a variety of invaluable purposes; the data can assist in the conservation, management, and repair of a structure, as well as provide a visually engaging educational resource for both the public and scholars. The acquired data acts as a form of digital preservation, a timeless virtual representation of the as-built structure. The technical capability of these systems is particularly suited for the documentation of a richly articulated and detailed building such as the high Gothic Cologne Cathedral. The 3D documentation of the Cologne Cathedral UNESCO World Heritage Site is a multiphase project developed by Heriot-Watt University, Edinburgh in partnership with the Fresenius University of Applied Sciences, Cologne, and the Metropolitankapitel der Hohen Domkirche Köln Dombauhütte. The project has also received generous support from Zoller + Fröhlich (Z+F) and the City of Cologne.

  19. 3-DIMENSIONAL Geometric Survey and Structural Modelling of the Dome of Pisa Cathedral

    Science.gov (United States)

    Aita, D.; Barsotti, R.; Bennati, S.; Caroti, G.; Piemonte, A.

    2017-02-01

    This paper aims to illustrate the preliminary results of a research project on the dome of Pisa Cathedral (Italy). The final objective of the present research is to achieve a deep understanding of the structural behaviour of the dome, through a detailed knowledge of its geometry and constituent materials, and by taking into account historical and architectural aspects as well. A reliable survey of the dome is the essential starting point for any further investigation and adequate structural modelling. Examination of the status quo on the surveys of the Cathedral dome shows that a detailed survey suitable for structural analysis is in fact lacking. For this reason, high-density and high-precision surveys have been planned, by considering that a different survey output is needed, according both to the type of structural model chosen and purposes to be achieved. Thus, both range-based (laser scanning) and image-based (3D Photogrammetry) survey methodologies have been used. This contribution introduces the first results concerning the shape of the dome derived from surveys. Furthermore, a comparison is made between such survey outputs and those available in the literature.

  20. Development of the next generation reactor analysis code system, MARBLE

    International Nuclear Information System (INIS)

    Yokoyama, Kenji; Hazama, Taira; Nagaya, Yasunobu; Chiba, Go; Kugo, Teruhiko; Ishikawa, Makoto; Tatsumi, Masahiro; Hirai, Yasushi; Hyoudou, Hideaki; Numata, Kazuyuki; Iwai, Takehiko; Jin, Tomoyuki

    2011-03-01

    A next generation reactor analysis code system, MARBLE, has been developed. MARBLE is a successor of the fast reactor neutronics analysis code systems, JOINT-FR and SAGEP-FR (conventional systems), which were developed for so-called JUPITER standard analysis methods. MARBLE has the equivalent analysis capability to the conventional system because MARBLE can utilize sub-codes included in the conventional system without any change. On the other hand, burnup analysis functionality for power reactors is improved compared with the conventional system by introducing models on fuel exchange treatment and control rod operation and so on. In addition, MARBLE has newly developed solvers and some new features of burnup calculation by the Krylov sub-space method and nuclear design accuracy evaluation by the extended bias factor method. In the development of MARBLE, the object oriented technology was adopted from the view-point of improvement of the software quality such as flexibility, expansibility, facilitation of the verification by the modularization and assistance of co-development. And, software structure called the two-layer system consisting of scripting language and system development language was applied. As a result, MARBLE is not an independent analysis code system which simply receives input and returns output, but an assembly of components for building an analysis code system (i.e. framework). Furthermore, MARBLE provides some pre-built analysis code systems such as the fast reactor neutronics analysis code system. SCHEME, which corresponds to the conventional code and the fast reactor burnup analysis code system, ORPHEUS. (author)

  1. Stable isotope identification of Greek and Turkish marbles

    International Nuclear Information System (INIS)

    Coleman, M.; Walker, S.

    1979-01-01

    Carbon and oxygen isotope analyses have been used to test the provenance of the marble of some Attic sarcophagi in the British Museum collection. Of three believed to be of Pentelic marble, only one has been so confirmed. Analyses of fragmentary sarcophagi of similar workmanship has confirmed their Proconnesian origin. Data from fragments of Sidamara sarcophagi have supplemented observations of technique, finish and dimensions of carved figures and decoration to determine whether the fragments come from the same sarcophagus. (author)

  2. Development of the versatile reactor analysis code system, MARBLE2

    International Nuclear Information System (INIS)

    Yokoyama, Kenji; Jin, Tomoyuki; Hazama, Taira; Hirai, Yasushi

    2015-07-01

    The second version of the versatile reactor analysis code system, MARBLE2, has been developed. A lot of new functions have been added in MARBLE2 by using the base technology developed in the first version (MARBLE1). Introducing the remaining functions of the conventional code system (JOINT-FR and SAGEP-FR), MARBLE2 enables one to execute almost all analysis functions of the conventional code system with the unified user interfaces of its subsystem, SCHEME. In particular, the sensitivity analysis functionality is available in MARBLE2. On the other hand, new built-in solvers have been developed, and existing ones have been upgraded. Furthermore, some other analysis codes and libraries developed in JAEA have been consolidated and prepared in SCHEME. In addition, several analysis codes developed in the other institutes have been additionally introduced as plug-in solvers. Consequently, gamma-ray transport calculation and heating evaluation become available. As for another subsystem, ORPHEUS, various functionality updates and speed-up techniques have been applied based on user experience of MARBLE1 to enhance its usability. (author)

  3. The Marble Types of Thassos Island through the Ages

    Science.gov (United States)

    Laskaridis, Kostas; Patronis, Michael; Papatrechas, Christos; Schouenborg, Björn

    2013-04-01

    The first references to the "white whole-grain" marble of Thassos Island, Greece, date back to the 6th century BC when stones were quarried at Alyki peninsula and at Fanari and Vathy capes. Since that time, Thassos marble was exported to Samothraki and other neighbouring islands, Asia Minor coastal cities, Southern Greece and Rome. In ancient times, there were two principal types of marble quarries in Thassos: (a) those producing material for the construction of temples and for the creation of various art pieces, i.e. ornamental stones, and (b) those for extraction of rough blocks for export. This paper aims at describing the Thassos marble, the geological setting in brief, its historic use and future supply possibilities and other reasons why it is a time-enduring ornamental stone. The aesthetical characteristics and the physical mechanical properties of its two main types (i.e. calcitic and dolomitic) are described and evaluated. The relevant results justify the wide application range and the continuous use of Thassos marble from ancient to present times and confirm the ability of this stone to survive over time. Keywords: Thassos, Marble, Ornamental Stones, Physical Mechanical Properties, Historic use

  4. Optical transmission properties of Pentelic and Paros marble.

    Science.gov (United States)

    Weigand, Rosa; García, Pablo A; Campos Acosta, Joaquín; Storch de Gracia, Jacobo

    2015-02-01

    Ancient Greek and Roman sources report that the statue of Zeus in Olympia had a head, and in particular eyes, similar to the description of Zeus by Homer, so we think that the statue was visible to the human eye. Since the temple was 12 m high, and had a small door and no windows, the illumination of the statue by conventional media is questionable. The aim of this paper is to characterize the optical transmission of Paros and Pentelic marble to demonstrate that it was possible to have the Zeus temple illuminated through the roof marble tiles. Spectral absolute transmittance measurements were taken in samples with different thicknesses using a calibrated spectrophotometer, as well as total transmittance measurements using a luxmeter. The results show that both types of marble transmit light and that Pentelic marble has a higher transmittance in the visible range than Paros marble in some cases and hence could have been one reason, among others, to change the type of marble in the roof in antiquity.

  5. The Cathedral and the Bazaar of E-Repository Development: Encouraging Community Engagement with Moving Pictures and Sound

    Science.gov (United States)

    Wong, Denis; Shephard, Kerry L.; Phillips, Peter

    2008-01-01

    This paper offers an insight into the development, use and governance of e-repositories for learning and teaching, illustrated by Eric Raymond's bazaar and cathedral analogies and by a comparison of collection strategies that focus on content coverage or on the needs of users. It addresses in particular the processes that encourage and achieve…

  6. Uniting geology and craftsmanship to find the optimal soapstone for restoration of the Nidaros soapstone Cathedral in Norway

    Science.gov (United States)

    Aslaksen Aasly, Kari; Meyer, Gurli Birgitte; Kløve Keiding, Jakob; Langås, Rune; Lund, Vegard

    2017-04-01

    The Nidaros Cathedral situated in Trondheim, Norway is a restored cathedral resting on the remnants of an original medieval church sanctified St Olav. The cathedral became one of the most important sanctuary for pilgrimage during the Middle Ages and still is today. In a European context the cathedral, along with a certain group of other churches and monasteries in Norway, is unique by being build from soapstone (steatite). This talc and chlorite dominated metamorphic rock is relatively soft, heat resistant and dense making the material ideal for cooking pots, stoves and all kinds of utensils. Soapstone has therefore been appreciated, used and quarried since the Stone Age in Norway. At the onset of Christianity the choice of soapstone from harder rock types was not difficult for the building owners combining the vision of stone churches in Norway with the skills of wood carving traditions of local handicraftsmen. The best example is the Nidaros Cathedral built in the 11th to 14th century. In 1869, the Nidaros Cathedral Restoration Workshop (NDR) was founded with the purpose of restoring the cathedral using original craftsman's techniques and authentic materials. The restoration was originally completed in 1969, but is still ongoing due to weathering of certain used soapstone types. A major challenge remains to find soapstone resources of the right quality. Core issues relate to avoid rocks with cracks and cleavage, a demand for homogeneity, maintaining esthetic authenticity, resistance to weathering (disintegration) and last but not least the ultimatum of workability. Thus locating new soapstone resources depends strongly on geological understanding, quarry experience and stone carver's knowledge. The present work is based on close cooperation between stone carvers and geologists in a common goal of uniting knowledge and experience in defining qualities of soapstone for various purposes of restoration. Cooperate observations of geology and carving properties in the

  7. Dynamic mechanical behaviors of Fangshan marble

    Directory of Open Access Journals (Sweden)

    Wei Yao

    2017-10-01

    Full Text Available Dynamic strength parameters are extensively used in mining engineering and rock mechanics. However, there are no widely accepted dynamic failure models for rocks. In this study, the dynamic punching shear strength, uniaxial compressive strength (UCS and tensile strength of fine-grained Fangshan marble (FM are first measured by using a split Hopkinson pressure bar (SHPB system. The pulse-shaping technique is then implemented to maintain the dynamic force balance in SHPB tests. Experimental results show that the dynamic punching shear strength, UCS and tensile strength increase with the loading rate. A recently developed dynamic Mohr-Coulomb theory is then used to interpret the testing data. In this model, the angle of internal friction ϕ is assumed to be independent of loading rate and is obtained using the static strength values. According to the dynamic Mohr-Coulomb theory, the dynamic UCS and the dynamic tensile strength are predicted from the dynamic punching shear strength. Furthermore, based on this dynamic theory, the dynamic UCS is predicted from the dynamic tensile strength. The consistency between the predicted and measured dynamic strengths demonstrates that the dynamic Mohr-Coulomb theory is applicable to FM.

  8. PHOTOGRAMMETRIC AND LIDAR DOCUMENTATION OF THE ROYAL CHAPEL (CATHEDRAL-MOSQUE OF CORDOBA, SPAIN

    Directory of Open Access Journals (Sweden)

    J. Cardenal

    2012-07-01

    Full Text Available At present, cultural heritage documentation projects use a variety of spatial data acquisition techniques such as conventional surveying, photogrammetry and terrestrial laser scanning. This paper deals with a full documentation project based on all those techniques in the Royal Chapel located in the Cathedral-Mosque of Cordoba in Spain, declared World Heritage Site by UNESCO. At present, the Royal Chapel is under study for a detailed diagnostic analysis in order to evaluate the actual state of the chapel, pathologies, construction phases, previous restoration works, material analysis, etc. So in order to assist the evaluation, a documentation project with photogrammetric and laser scanner techniques (TLS has been carried out. With this purpose, accurate cartographic and 3D products, by means of the integration of both image and laser based techniques, were needed to register all data collected during the diagnostic analysis.

  9. RESEARCHING OF MEAT AND FAT COLOUR AND MARBLING IN BEEF

    Directory of Open Access Journals (Sweden)

    A. B. Lisitsyn

    2016-01-01

    Full Text Available The studies of meat and fat colour and marbling in Longissimus dorsi of different cattle — beef-producing (Aberdeen-Angus,Herefordbreeds and dual-purpose (Simmental, Black-and-white breeds — allowed to define groups by the colour values according to Lab international colour model. Measurements were performed 24 hours post-mortem between 12th and 13th ribs. It was found that different ranges of meat colour differed primarily in L* (lightness and a* (redness values, while b* (yellowness values did not significantly differ. The highest differentiation between ranges of fat colour was noted in b* values, whereas L* and a* slightly differed. Moreover, visual assessment of beef marbling by four grades (small, moderate, good, and rich and instrumental (microstructural analysis using a computer image analysis system were carried out. The morphometric study of marbling was conducted in accordance with the principles of system quantitative analysis. To perform quantitative measurements, object analysis parameters (area were specified. Both automatic and manual measurements of specified parameters were used. The study of Longissimus dorsi marbling established high agreement between visual and instrumental evaluations of marbling.

  10. Introducing a new aspect in marble quarry rehabilitation in Greece

    Science.gov (United States)

    Kaliampakos, D. C.; Mavrikos, A. A.

    2006-06-01

    For many years the marble extraction sector of the Greek mining industry has been in conflict with the public, especially in terms of rehabilitation of marble quarry sites. One of the main reasons for that is that the marble extraction sector has been unable to adjust to the existing legislative guidelines for the rehabilitation, such as extensive backfilling and re-vegetation. In the majority of cases these methods fail due to erosion of the backfill soil and adverse climatic conditions. As a result the number of abandoned marble quarry sites is continuously increasing. The present paper suggests a different approach regarding the rehabilitation of marble quarries. More specifically, the paper questions the applicability, the effectiveness, and the social usefulness of the above-mentioned guidelines and suggests the establishment of new land-uses, which are based on an in-depth analysis of the area’s special features, by taking full advantage of its potentials. What is more, the rehabilitation scheme proposes that the new land-uses and the quarrying activity may co-exist and operate simultaneously for a long period of time.

  11. Radiotracer studies in cavernous marble at Kamathikhairy Dam site, Pench Project (Maharashtra)

    International Nuclear Information System (INIS)

    Nath, Ravendra; Mahajan, N.M.; Vaidya, S.D.

    1982-01-01

    Radiotracer studies with tritiated water at Pench Project site conclusively proved that the cavernous marble upstream of the saddle dam is continuous with the marble occuring near the spillway portion of the main dam and that there is fast subterranean flow of water through the cavernous marble here. It is also established that this marble band upstream of the dam is interconnected with the marble band occuring in the vicinity of Pali village about 3 km downstream of the dam. Though big unclogged subterranean channels do not seem to exist in this region, which might have resulted in heavy leakage from the impounded reservoir, yet the possibility of some leakage of the water through the cavernous marble cannot be ruled out, due to the interconnection of the marble occuring upstream of the dam with the downstream marble band. (author)

  12. Erasmus syndrome in a marble worker

    Directory of Open Access Journals (Sweden)

    S. Bello

    2016-02-01

    Full Text Available Erasmus syndrome is defined as the association of silica exposure and subsequent development of systemic sclerosis. The limited number of cases reported in the literature mainly involves miners and only sporadically other professionals. We describe a case of Erasmus syndrome in a marble worker. A 68 year old man came to our observation complaining pelvic and scapular girdle pain, evening fever, intense weakness and emaciation for about 1 month. He also reported to have had Raynaud’s phenomenon in his hands for the last 13 years. Also, his occupational history revealed a chronic exposure to silica dust. The patient presented pain in his shoulders and hips, moderate skin thickening and sclerosis in his hands and fingers extending proximally to his wrists. The diagnosis of systemic sclerosis was determined according to his clinical and medical history, the positivity of anti-Scl 70 antibodies, the nailfold capillaroscopy suggestive of an active scleroderma pattern and the detection of a mild restrictive pulmonary syndrome. The evaluation of the organbased complications excluded a gastroenterological and cardiovascular involvement, while the chest computed tomography (CT detected multiple small nodules with a mantle distribution and enlarged lymph nodes with no signs of interstitial lung disease and fibrosis. Additional tests (positron emission tomography-CT, flexible bronchoscopy and broncho-alveolar lavage excluded infectious diseases and cancer. However, given the pulmonary involvement, we performed a histological examination of the parenchyma and lymph nodes, which revealed a picture of pneumoconiosis. In the end, the occupational history and the findings from the diagnostic procedures led to the diagnosis of pulmonary silicosis. The precise definition of the pulmonary involvement was essential to the therapeutic approach to this patient.

  13. Erasmus syndrome in a marble worker.

    Science.gov (United States)

    Bello, S; Rinaldi, A; Trabucco, S; Serafino, L; Bonali, C; Lapadula, G

    2015-12-30

    Erasmus syndrome is defined as the association of silica exposure and subsequent development of systemic sclerosis. The limited number of cases reported in the literature mainly involves miners and only sporadically other professionals. We describe a case of Erasmus syndrome in a marble worker. A 68 year old man came to our observation complaining pelvic and scapular girdle pain, evening fever, intense weakness and emaciation for about 1 month. He also reported to have had Raynaud's phenomenon in his hands for the last 13 years. Also, his occupational history revealed a chronic exposure to silica dust. The patient presented pain in his shoulders and hips, moderate skin thickening and sclerosis in his hands and fingers extending proximally to his wrists. The diagnosis of systemic sclerosis was determined according to his clinical and medical history, the positivity of anti-Scl 70 antibodies, the nailfold capillaroscopy suggestive of an active scleroderma pattern and the detection of a mild restrictive pulmonary syndrome. The evaluation of the organbased complications excluded a gastroenterological and cardiovascular involvement, while the chest computed tomography (CT) detected multiple small nodules with a mantle distribution and enlarged lymph nodes with no signs of interstitial lung disease and fibrosis. Additional tests (positron emission tomography-CT, flexible bronchoscopy and broncho-alveolar lavage) excluded infectious diseases and cancer. However, given the pulmonary involvement, we performed a histological examination of the parenchyma and lymph nodes, which revealed a picture of pneumoconiosis. In the end, the occupational history and the findings from the diagnostic procedures led to the diagnosis of pulmonary silicosis. The precise definition of the pulmonary involvement was essential to the therapeutic approach to this patient.

  14. DETERMINATION OF THERMAL RESPONSE OF CARRARA AND SNEZNIKOVSKY MARBLE USED AS A BUILDING MATERIALS

    Directory of Open Access Journals (Sweden)

    Veronika Petráňová

    2016-02-01

    Full Text Available Physical weathering of marble, widely used as a cladding material on buildings, is one of the most common damaging mechanism caused by anisotropic thermal expansion of calcite grains. The extent of marble deterioration depends mainly on stone fabric and texture. Dry cuboids of Carrara marble and marble from Dolni Morava quarry were subjected to microscopic analysis and thermal cycling, to determine the thermal expansion related to stone fabric and predominant lattice orientation of grains (i.e. texture.

  15. Integrated Thermal-Energy Analysis of Innovative Translucent White Marble for Building Envelope Application

    OpenAIRE

    Federica Rosso; Anna Laura Pisello; Franco Cotana; Marco Ferrero

    2014-01-01

    Marble is a natural material, used in the construction field since antiquity. It has always been used to communicate monumentality and solidity. Nowadays new technologies permit marble to express new languages: particularly, translucent marble technology overturns the concept of solidity. The main issue to address is the lack of thermal-energy performance of such a thin stone layer as the only facade component. Conversely, Bianco Carrara and Statuario marbles, for instance, have intrinsic be...

  16. Physical and Mechanical Characterization of Artificial Stone with Marble Calcite Waste and Epoxy Resin

    OpenAIRE

    Silva, Fernanda Souza; Ribeiro, Carlos Eduardo Gomes; Rodriguez, Rubén Jesus Sánchez

    2017-01-01

    The incorporation of calcite marble waste in epoxy resin for the production of artificial stone can represent a technical-economical method and environmentally viable, reducing the amount of discarded residue in the environment, and adding economic value to marble waste and enabling the generation of jobs. The production of natural stone in Brazil recorded an exorbitant amount of waste generated in marble processing. Only 75% of marble taken from the deposits it becomes the finished product t...

  17. DETERMINATION OF THERMAL RESPONSE OF CARRARA AND SNEZNIKOVSKY MARBLE USED AS A BUILDING MATERIALS

    OpenAIRE

    Veronika Petráňová; Jaroslav Valach; Alberto Viani; Marta Peréz Estébanez

    2016-01-01

    Physical weathering of marble, widely used as a cladding material on buildings, is one of the most common damaging mechanism caused by anisotropic thermal expansion of calcite grains. The extent of marble deterioration depends mainly on stone fabric and texture. Dry cuboids of Carrara marble and marble from Dolni Morava quarry were subjected to microscopic analysis and thermal cycling, to determine the thermal expansion related to stone fabric and predominant lattice orientation of grains (i....

  18. Fabrication of superhydrophobic fluorinated silica nanoparticles for multifunctional liquid marbles

    Science.gov (United States)

    Shang, Qianqian; Hu, Lihong; Hu, Yun; Liu, Chengguo; Zhou, Yonghong

    2018-01-01

    A facile one-pot method for the fabrication of superhydrophobic fluorinated silica nanoparticles is reported. Fluorinated aggregated silica (A-SiO2/FAS) nanoparticles were synthesized by controlling the nanoparticles assembly, in situ fixation and overgrowth of particle seeds with the assist of tetraethoxysilane (TEOS) in ethanol/water solution and then modification with fluoroalkylsilane (FAS) molecules. Such kind of A-SiO2/FAS nanoparticles showed superhydrophobicity and was not wetted by water, thus it could be served as the encapsulating shells to manipulate liquid droplets. Liquid marbles fabricated from A-SiO2/FAS nanoparticles were used for ammonia gas sensing or emitting by taking advantage of the porosity and superhydrophobicity of the liquid marble shells. In addition, the posibility of A-SiO2/FAS-based liquid marbles as microreactor for dopamine polymerization also was explored.

  19. Utilisation of Waste Marble Dust as Fine Aggregate in Concrete

    Science.gov (United States)

    Vigneshpandian, G. V.; Aparna Shruthi, E.; Venkatasubramanian, C.; Muthu, D.

    2017-07-01

    Concrete is the important construction material and it is used in the construction industry due to its high compressive strength and its durability. Now a day’s various studies have been conducted to make concrete with waste material with the intention of reducing cost and unavailability of conventional materials. This paper investigates the strength properties of concrete specimens cast using waste marble dust as replacement of fine aggregate. The marble pieces are finely crushed to powdered and the gradation is compared with conventional fine aggregate. Concrete specimen were cast using wmd in the laboratory with different proportion (25%, 50% and 100%) by weight of cement and from the studies it reveals that addition of waste marble dust as a replacement of fine aggregate marginally improves compressive, tensile and flexural strength in concrete.

  20. Midwest nukes tumble, rock industry: Byron, Marble Hill, Zimmer

    International Nuclear Information System (INIS)

    Nogee, A.

    1984-01-01

    The nuclear industry is suffering from a lack of investor confidence because of cancelled projects and the unprecedented rejection of an operating license for Commonwealth Edison's Byron plant on grounds that the utility failed to meet quality assurance responsibilities. When plans to complete the Zimmer and Marble Hill nuclear plants were abandoned, Bechtel came forward with a financing plan that, while rejected for Zimmer and Marble Hill, could lead to future bailouts. Both Zimmer and Marble Hill plants could be partially converted to coal. The loss of investor confidence in nuclear plants is largely due to political pressures brought on by a combination of citizen intervenors, whistle blowers on construction sites and disagreements between participating utilities. A rise in stock prices followed the cancellation announcements and the lowered investment security ratings

  1. Preparation and analysis of a marble reference material

    International Nuclear Information System (INIS)

    Carmo Freitas, M.; Moens, L.; Seabra e Barros, J.

    1988-01-01

    A 7 kg stone of a Carrara marble was reduced to grains smaller than 100 μm, mixed and homogenized in order to prepare a marble reference material. The homogeneity was tested for 16 elements by instrumental neutron activation analysis (INAA). Through a one-way analysis of variance based on several analyses of each of 15 bottles and within the same bottle, it was concluded that the inter-bottle heterogeneity is not greater than the intra-bottle heterogeneity. Results on the concentration of major and trace elements in the marble reference material, obtained by different laboratories and different techniques, are given. The limestone certified reference material KALKSTEIN KH was used to evaluate measurement accuracy, to intercalibrate laboratories, and to provide compatibility of measurement data. (author) 10 refs.; 12 tabs

  2. 75 FR 64303 - Vermont Marble Power, Division of Omya Inc.; Central Vermont Public Service Corporation; Notice...

    Science.gov (United States)

    2010-10-19

    ...-029; 2445-023; 2558-029] Vermont Marble Power, Division of Omya Inc.; Central Vermont Public Service... Soliciting Comments and Motions To Intervene October 12, 2010. On August 31, 2010, Vermont Marble Power... relicensing. Applicant Contacts: For transferor: Todd Allard, Operations Engineer Omya, Inc., Vermont Marble...

  3. Effects of acid rain and sulfur dioxide on marble dissolution

    Science.gov (United States)

    Schuster, Paul F.; Reddy, Michael M.; Sherwood, Susan I.

    1994-01-01

    Acid precipitation and the dry deposition of sulfur dioxide (SO2) accelerate damage to carbonate-stone monuments and building materials. This study identified and quantified environmental damage to a sample of Vermont marble during storms and their preceding dry periods. Results from field experiments indicated the deposition of SO2 gas to the stone surface during dry periods and a twofold increase in marble dissolution during coincident episodes of low rain rate and decreased rainfall pH. The study is widely applicable to the analysis of carbonate-stone damage at locations affected by acid rain and air pollution.

  4. Experimental Investigation on Deformation Failure Characteristics of Crystalline Marble Under Triaxial Cyclic Loading

    Science.gov (United States)

    Yang, Sheng-Qi; Tian, Wen-Ling; Ranjith, P. G.

    2017-11-01

    The deformation failure characteristics of marble subjected to triaxial cyclic loading are significant when evaluating the stability and safety of deep excavation damage zones. To date, however, there have been notably few triaxial experimental studies on marble under triaxial cyclic loading. Therefore, in this research, a series of triaxial cyclic tests was conducted to analyze the mechanical damage characteristics of a marble. The post-peak deformation of the marble changed gradually from strain softening to strain hardening as the confining pressure increased from 0 to 10 MPa. Under uniaxial compression, marble specimens showed brittle failure characteristics with a number axial splitting tensile cracks; in the range of σ 3 = 2.5-7.5 MPa, the marble specimens assumed single shear fracture characteristics with larger fracture angles of about 65°. However, at σ 3 = 10 MPa, the marble specimens showed no obvious shear fracture surfaces. The triaxial cyclic experimental results indicate that in the range of the tested confining pressures, the triaxial strengths of the marble specimens under cyclic loading were approximately equal to those under monotonic loading. With the increase in cycle number, the elastic strains of the marble specimens all increased at first and later decreased, achieving maximum values, but the plastic strains of the marble specimens increased nonlinearly. To evaluate quantitatively the damage extent of the marble under triaxial cyclic loading, a damage variable is defined according to the irreversible deformation for each cycle. The evolutions of the elastic modulus for the marble were characterized by four stages: material strengthening, material degradation, material failure and structure slippage. Based on the experimental results of the marble specimens under complex cyclic loading, the cohesion of the marble decreased linearly, but the internal friction angles did not depend on the damage extent. To describe the peak strength

  5. THE INFLUENCE OF ACID RAINS ON THE LITHOTHAMNIAN LIMESTONE ON THE GALLERY OF THE MARY'S ASCENSION CATHEDRAL, ZAGREB, CROATIA

    Directory of Open Access Journals (Sweden)

    Branko Crnković

    1994-12-01

    Full Text Available Urban, environmental pollution, caused by acid rains and damages of stone elements on Cathedral of Zagreb are described. On the surfaces of limestone elements that are in the »shade«, the black scabs have developed. The outher crusts, and inner powdery matter of the black scabs have been investigated by microscopy, and analyzed by means of x-ray. thermal and chemical analyses. They contain gypsum, calcite, soot, and sporadic fly ash.

  6. 77 FR 70159 - Marble River, LLC v. Noble Clinton Windpark I, LLC, Noble Ellenburg Windpark, LLC, Noble...

    Science.gov (United States)

    2012-11-23

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. EL13-20-000] Marble River... Commission's (Commission) Rules of Practice and Procedure, Marble River, LLC (Marble River or Complainant.... (NYISO or Respondent), alleging that Noble failed to pay Marble River for headroom created by common...

  7. Genetic diversity and population structure of the marbled rockfish ...

    Indian Academy of Sciences (India)

    Key Laboratory for Marine Living Resources and Molecular Engineering, College of Marine Science,. Zhejiang ... MgCl2, 0.2 mM dNTPs, 0.2 μM of the forward and reverse ..... and tolerance, and oxygen consumption of the marbled rockfish,.

  8. Janus droplets: liquid marbles coated with dielectric/semiconductor particles.

    Science.gov (United States)

    Bormashenko, Edward; Bormashenko, Yelena; Pogreb, Roman; Gendelman, Oleg

    2011-01-04

    The manufacturing of water droplets wrapped with two different powders, carbon black (semiconductor) and polytetrafluoroethylene (dielectric), is presented. Droplets composed of two hemispheres (Janus droplets) characterized by various physical and chemical properties are reported first. Watermelon-like striped liquid marbles are reported. Janus droplets remained stable on solid and liquid supports and could be activated with an electric field.

  9. Characterization of agua de Ramon marbles, Cordoba Province, Argentina

    International Nuclear Information System (INIS)

    Tourn, S.; Castro, L. . E mail: selvia@fcen.uba.ar, lilianacastro@fibertel.com.ar

    2004-01-01

    Agua de Ramon district is located in the NW of Cordoba, Argentina, between 3 49' and 30 0 52' S and 65 0 21' and 65 0 24' W, in the Eastern Pampean Range setting. It was a very important tungsten district until the end of 1950'decade when tungsten mining became of no economic interest. The objective is to report for the first time the petrological, mineralogical and geochemical characteristics of several marble lenses located in the sourthern of the area. Marble outcrops are lenticular ranging from 1 m to 80 m in length and 0.50 m to 20 m width. They appear massive, fine-grained and in light colors (white, pale green, very light brown and pale gray). These last varieties show a distinct banded structure due to little differences in color. These marbles are mainly composed of magnesian calcite accompanied by minor amounts of dolomite, forsterite, humite group minerals, tremolite, talc, serpentine and clinochlore, and scheelite, sphene, apatite and opaque minerals like hematite, magnetite, illmenite, pirrothite and pyrite as accessory minerals. Major chemical analyses indicate a relatively high SiO2 and MgO content, and minor CaO, in comparison with marbles of this type. Mineral paragenesis was useful to evaluate metamorphism conditions in this area [es

  10. Surveying marbled murrelets at inland forested sites: a guide

    Science.gov (United States)

    Peter W.C. Paton; C. John Ralph; Harry R. Carter; S. Kim Nelson

    1990-01-01

    The marbled murrelet (Brachyramphus marmoratus), a seabird, nests in forested stands from southeast Alaska south to Santa Cruz, California. Because of this species' close association with old-growth forests, researchers and land managers need a method to assess murrelet distribution and use patterns throughout its range. This guide describes a...

  11. Cutting of Two Marble Dummy Crystals in Industrial Prototype Conditions

    CERN Document Server

    De Forni, Armando; Limia-Conde, Francisco; Morino, René

    1997-01-01

    Two marble samples were cut to specified conditions with the tooling set designed for the mass processing of the 110'000 PbWO4 crystals of the CMS Electromagnetic Calorimeter. We wanted to test in particular the reproducibility of the electrical contact on the reference sphere, the accuracy of the new positioning tools at each cutting operation in their respective positions

  12. Faculty of Law: MaRBLe for Lawyers

    NARCIS (Netherlands)

    Akkermans, Bram; Bastiaens, Ellen; van Tilburg, Jonathan; van Merriënboer, Jeroen

    The Maastricht University Research Based Learning (MaRBLe) project offered a unique but challenging opportunity to the law faculty. Working with undergraduate (or bachelor) students on research was already part of regular, i.e. curricular, teaching activities, but the number of students and

  13. Development of comprehensive and versatile framework for reactor analysis, MARBLE

    International Nuclear Information System (INIS)

    Yokoyama, Kenji; Hazama, Taira; Numata, Kazuyuki; Jin, Tomoyuki

    2014-01-01

    Highlights: • We have developed a neutronics code system for reactor analysis. • The new code system covers all five phases of the core design procedures. • All the functionalities are integrated and validated in the same framework. • The framework supports continuous improvement and extension. • We report results of validation and practical applications. - Abstract: A comprehensive and versatile reactor analysis code system, MARBLE, has been developed. MARBLE is designed as a software development framework for reactor analysis, which offers reusable and extendible functions and data models based on physical concepts, rather than a reactor analysis code system. From a viewpoint of the code system, it provides a set of functionalities utilized in a detailed reactor analysis scheme for fast criticality assemblies and power reactors, and nuclear data related uncertainty quantification such as cross-section adjustment. MARBLE includes five sub-systems named ECRIPSE, BIBLO, SCHEME, UNCERTAINTY and ORPHEUS, which are constructed of the shared functions and data models in the framework. By using these sub-systems, MARBLE covers all phases required in fast reactor core design prediction and improvement procedures, i.e. integral experiment database management, nuclear data processing, fast criticality assembly analysis, uncertainty quantification, and power reactor analysis. In the present paper, these functionalities are summarized and system validation results are described

  14. Assembly of greek marble inscriptions by isotopic methods.

    Science.gov (United States)

    Herz, N; Wenner, D B

    1978-03-10

    Classical Greek inscriptions cut in marble, whose association as original stelai by archeological methods was debatable, were selected for study. Using traditional geological techniques and determinations of the per mil increments in carbon-13 and oxygen-18, it was determined that fragments could be positively assigned to three stelai, but that fragments from three other stelai had been incorrectly associated.

  15. Chapter 22: Marbled Murrelet Food Habits and Prey Ecology

    Science.gov (United States)

    Esther E. Burkett

    1995-01-01

    Information on food habits of the Marbled Murrelet (Brachyramphus marmoratus) was compiled from systematic studies and anecdotal reports from Alaska to California. Major differences between the winter and summer diets were apparent, with euphausiids and mysids becoming more dominant during winter and spring. The primary invertebrate prey items were...

  16. Etching and image analysis of the microstructure in marble

    DEFF Research Database (Denmark)

    Alm, Ditte; Brix, Susanne; Howe-Rasmussen, Helle

    2005-01-01

    of grains exposed on that surface are measured on the microscope images using image analysis by the program Adobe Photoshop 7.0 with Image Processing Toolkit 4.0. The parameters measured by the program on microscope images of thin sections of two marble types are used for calculation of the coefficient...

  17. Chapter 36: Status of Forest Habitat of the Marbled Murrelet

    Science.gov (United States)

    David A. Perry

    1995-01-01

    Marbled Murrelets (Brachyramphus marmoratus) have been shown to be dependant upon old-growth forests for nesting habitat. These forests have declined over the last century as they are cut for human use. This paper reviews the current status of old-growth forests along the west coast, in both the United States and Canada.

  18. The secret life of marbled murrelets: monitoring populations and habitats.

    Science.gov (United States)

    Jonathan Thompson

    2007-01-01

    The marbled murrelet is a small diving seabird that occupies coastal waters from Alaska to central California. Murrelets have a unique nesting strategy that requires them to commute tens of miles inland, where they use large mossy branches on older conifers as platforms to balance their solitary egg. Populations have been declining for decades as the amount of nesting...

  19. Assessment of the Durability of Marble Cladding by Laboratory Exposure compared to Natural Exposure

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Leksø, Henrik; Grelk, Bent

    2003-01-01

    Marble exposed to temperature cycles at high relative humidity (RH) under laboratory conditions loose strength similar to loss of strength for the same marble exposed to natural climate. Two marble types from three different building facades in Copenhagen are studied. From each building a marble...... cladding panel exposed for the south facing natural climate during 29, 60 and 61 years, respectively, and a cladding panel of each of the marble types only exposed for indoor climate are cut in bars of size 30x30x300 mm. The bars from indoor are exposed to temperature cycles between 10 °C and 60 °C...... at nearly 100% RH and at nearly 0% RH. The strength of the natural exposed marble as well as the laboratory-exposed marble are measured as flexural strength under concentrated load using four-point loading. Analysis of the strength test show that it is possible to transfer test results for laboratory...

  20. Natural radioactivity and dose from marble used as building material

    International Nuclear Information System (INIS)

    Iqbal, M.

    1999-01-01

    The activities of /sup 226/Ra, /sup 232/Th and /sup 40/K radionuclides have been measured in marble chips collected from the factories in Islamabad, Pakistan using NaI(TI) gamma ray spectrometer. The spectrometry system was calibrated with a reference material RGI obtained from IAEA. The activity measurements were based upon 1460.8 keV, 1764.5 keV and 2614.6 keV energies of /sup 40/K, /sup 226/Ra and /sup 232/Th, respectively. The spectrum stripping was done by matrix inversion method. The calculated specific activities of the marble samples varied from 4 Bq.kg/sup -1/ to 63 Bq.kg/sup -1/ for /sup 40/K. The Radium equivalent activities, have been calculated and were found to vary from 26 Bq.kg/sup -1/ to 100 Bq.kg/sup -1/, respectively. These values are within the limit by OECD (Ra /sub eq/ < 370 Bq.kg/sup -1/) and ICRP-60 (Ra/sub eq/ < 100 Bq.kg/sup -1/ for the safe use of the construction materials for dwelling. H/sub ex/ and h/sub in/ indices ranges from 0.0716 to 0.2692 and from 0.0831 to 0.4277, respectively which are also less than 1 according to OECD limit. The calculated values of overall absorbed dose rate for marble samples varies from 13 nGy.h/sup -1/ to 46 nGy.h/sup -1/. Dose rate (nGy/hr per Bq/kg) using Ingree code at a distance of 1 meter from floor varies from 10 to 65 for /sup 226/Ra, 11 to 53 for /sup 232/Th and 1 to 9 for /sup 40/K for all marble samples. All these results indicate that marble samples under study are safe for use as a construction material. (author)

  1. Seismic risk assessment of Trani's Cathedral bell tower in Apulia, Italy

    Science.gov (United States)

    Diaferio, Mariella; Foti, Dora

    2017-09-01

    The present paper deals with the evaluation of the seismic vulnerability of slender historical buildings; these structures, in fact, may manifest a high risk with respect to seismic actions as usually they have been designed to resist to gravitational loads only, and are characterized by a high flexibility. To evaluate this behavior, the bell tower of the Trani's Cathedral is investigated. The tower is 57 m tall and is characterized by an unusual building typology, i.e., the walls are composed of a concrete core coupled with external masonry stones. The dynamic parameters and the mechanical properties of the tower have been evaluated on the basis of an extensive experimental campaign that made use of ambient vibration tests and ground penetrating radar tests. Such data have been utilized to calibrate a numerical model of the examined tower. A linear static analysis, a dynamic analysis and a nonlinear static analysis have been carried out on such model to evaluate the displacement capacity of the tower and the seismic risk assessment in accordance with the Italian guidelines.

  2. The Cathedral and the Bazaar: Monocentric and Polycentric River Basin Management

    Directory of Open Access Journals (Sweden)

    Bruce Lankford

    2010-02-01

    Full Text Available Two contemporary theories of river basin management are compared. One is centralised 'regulatory river basin management' with an apex authority that seeks hydrometric data and nationally agreed standards and procedures in decisions over water quality and allocation. This model is commonplace and can be identified in many water training curricula and derivatives of basin management policy. The other, 'polycentric river basin management', is institutionally, organisationally and geographically more decentralised, emphasising local, collective ownership and reference to locally agreed standards. The polycentric model is constructed from the creation of appropriate managerial subunits within river basins. This model emphasises the deployment of hydrologists, scientists and other service providers as mediating agents of environmental and institutional transformation, tackling issues arising within and between the basin subunits such as water allocation and distribution, productivity improvement and conflict resolution. Significantly, it considers water allocation between subunits rather than between sectors and to do this promulgates an experimental, step-wise pragmatic approach, building on local ideas to make tangible progress in basins where data monitoring is limited, basin office resources are constrained and regulatory planning has stalled. To explore these issues, the paper employs the 'Cathedral and Bazaar' metaphor of Eric Raymond. The discussion is informed by observations from Tanzania, Nigeria and the UK.

  3. a Restoration Oriented Hbim System for Cultural Heritage Documentation: the Case Study of Parma Cathedral

    Science.gov (United States)

    Bruno, N.; Roncella, R.

    2018-05-01

    The need to safeguard and preserve Cultural Heritage (CH) is increasing and especially in Italy, where the amount of historical buildings is considerable, having efficient and standardized processes of CH management and conservation becomes strategic. At the time being, there are no tools capable of fulfilling all the specific functions required by Cultural Heritage documentation and, due to the complexity of historical assets, there are no solution as flexible and customizable as CH specific needs require. Nevertheless, BIM methodology can represent the most effective solution, on condition that proper methodologies, tools and functions are made available. The paper describes an ongoing research on the implementation of a Historical BIM system for the Parma cathedral, aimed at the maintenance, conservation and restoration. Its main goal was to give a concrete answer to the lack of specific tools required by Cultural Heritage documentation: organized and coordinated storage and management of historical data, easy analysis and query, time management, 3D modelling of irregular shapes, flexibility, user-friendliness, etc. The paper will describe the project and the implemented methodology, focusing mainly on survey and modelling phases. In describing the methodology, critical issues about the creation of a HBIM will be highlighted, trying to outline a workflow applicable also in other similar contexts.

  4. Open Source Paradigm: A Synopsis of The Cathedral and the Bazaar for Health and Social Care.

    Science.gov (United States)

    Benson, Tim

    2016-07-04

    Open source software (OSS) is becoming more fashionable in health and social care, although the ideas are not new. However progress has been slower than many had expected. The purpose is to summarise the Free/Libre Open Source Software (FLOSS) paradigm in terms of what it is, how it impacts users and software engineers and how it can work as a business model in health and social care sectors. Much of this paper is a synopsis of Eric Raymond's seminal book The Cathedral and the Bazaar, which was the first comprehensive description of the open source ecosystem, set out in three long essays. Direct quotes from the book are used liberally, without reference to specific passages. The first part contrasts open and closed source approaches to software development and support. The second part describes the culture and practices of the open source movement. The third part considers business models. A key benefit of open source is that users can access and collaborate on improving the software if they wish. Closed source code may be regarded as a strategic business risk that that may be unacceptable if there is an open source alternative. The sharing culture of the open source movement fits well with that of health and social care.

  5. Characterization and conservation of the stone used in the Cathedral of Granada, Spain

    Directory of Open Access Journals (Sweden)

    Villegas, R.

    1995-12-01

    Full Text Available This paper summarizes a study carried out on the Granada Cathedral which includes studies of indicators, factors and mechanisms of deterioration. A complete chemical and physical characterization of altered and unaltered material from the quarries and the building has been made. Eight commercial treatment products have been tested on the main stone-type used in the monument, including two accelerated weathering tests (salt crystallization and SO2 chemical attack. Some conservation proposals have been made.

    Este artículo recoge un estudio llevado a cabo sobre la Catedral de Granada que incluye la determinación de los indicadores, factores y mecanismos de deterioro. Asimismo se ha realizado una completa caracterización física y química del material alterado del edificio e inalterado de cantera. Se han probado ocho productos comerciales aplicados al principal tipo de piedra existente en el monumento, incluyendo la realización de dos ensayos de alteración acelerada (cristalización de sales y ataque químico con atmósfera de SO2. Como punto final se recogen algunas recomendaciones de cara a una posible intervención.

  6. The Romanesque Bronze Doors at Gniezno Cathedral Church: Some New Remarks

    Directory of Open Access Journals (Sweden)

    Tomasz Węcławowicz

    2017-06-01

    Full Text Available Among many Romanesque bronze doors in Europe the old entrance doors of the metropolitan cathedral in Gniezno, in the North Poland, are exceptional. For over a century many historians and historians of art have been trying to understand and explain its iconographic phenomenon. The Polish, Czech and German scholars have so far been unable to identify with any conviction, either the iconographic models or artistic provenance of the workshop. There were suggested some connections of the alleged bishop patrons to France and there were emphasizes technological possibilities of foundry workshops at the Meuse Valley. This “Meuse hypothesis” based mainly on historical suggestions became established as a certainty. However, it is important to emphasize the significant difference between the creator of the composition and of the craftsman who cast the bronze door. Years ago only Lech Kalinowski pointed out some general formal similarities to the North Italian sculpture. The purpose of this paper is to develop Kalinowski’s suggestions and to emphasise the puzzling similarities between details of Gniezno doors and some Emilian works executed by Master Wiligelmo da Modena and Master Nicolò. The concept of Italian relationship from Emilia province seems to be better for the comparative analysis than relationship with Meuse Valley based mostly on historical context. Crucial here is the additional, parallel analysis of the portal decoration in Czerwinsk Abbey.

  7. Integrated Thermal-Energy Analysis of Innovative Translucent White Marble for Building Envelope Application

    Directory of Open Access Journals (Sweden)

    Federica Rosso

    2014-08-01

    Full Text Available Marble is a natural material, used in the construction field since antiquity. It has always been used to communicate monumentality and solidity. Nowadays new technologies permit marble to express new languages: particularly, translucent marble technology overturns the concept of solidity. The main issue to address is the lack of thermal-energy performance of such a thin stone layer as the only facade component. Conversely, Bianco Carrara and Statuario marbles, for instance, have intrinsic benefits as natural cool materials, due to their high solar reflectance and thermal emissivity. Thus, this paper analyzes the thermal-energy and environmental behavior of marble facade for a new designed building in New York City. An integrated analysis of the energy performance of the marble skin is performed through a preliminary experimental characterization, carried out for two different types of naturally white marble, for comparative purposes. Then, a dynamic simulation model of the building is developed to evaluate year-round benefits and drawbacks of the translucent marble envelope in terms of indoor thermal comfort and air-conditioning requirement. The analysis showed how the proposed marble facade is able to decrease the energy requirement for cooling up to 6%, demonstrating possible relevant perspectives for marble-based facades, even in energy-efficient buildings.

  8. Radiation Shielding Properties of Some Marbles in Turkey

    International Nuclear Information System (INIS)

    Guenoglu, K.; Akkurt, I.

    2011-01-01

    Especially after development of technology, radiation started to be used in a large fields such as medicine, industry and energy. Using radiation in those fields bring hazardous effect of radiation into humancell. Thus radiation protection becomes important in physics. Although there are three ways for radiation protection, shielding of the radiation is the most commonly used method. Natural Stones such as marble is used as construction material especially in critical building and thus its radiation shielding capability should be determined.In this study, gamma ray shielding properties of some different types of marble mined in Turkey, have been measured using a NaI(Tl) scintillator detector. The measured results were also compared with the theoretical calculations XCOM.

  9. Radiation Shielding Properties of Some Marbles in Turkey

    Science.gov (United States)

    Günoǧlu, K.; Akkurt, I.

    2011-12-01

    Especially after development of technology, radiation started to be used in a large fields such as medicine, industry and energy. Using radiation in those fields bring hazordous effect of radition into humancell. Thus radiation protection becomes important in physics. Although there are three ways for radiation protection, shielding of the radiation is the most commonly used method. Natural Stones such as marble is used as construction material especially in critical building and thus its radiation shielding capability should be determined. In this study, gamma ray shielding properties of some different types of marble mined in Turkey, have been measured using a NaI(Tl) scintillator detector. The measured results were also compared with the theoretical calculations XCOM.

  10. Adoration of Virgin Mary Attended by Two St. Johns in Wawel Cathedral Collection

    Directory of Open Access Journals (Sweden)

    Magdalena Piwocka

    2004-12-01

    Full Text Available There is a canvas (98,5 x 222,5cm in the Wawel Cathedral that is not connected with any existing or historically documented altars inside the church (il. 1-3. Owing to its shape it has so far been considered to have been a predella, which - taking into account its size and proportions - seems rather unlikely. It may have been the top of the middle part of a retable, possibly in an altar dedicated to the two St. Johns. The painting presents the Virgin Mary with the Child seated under a canopy, attended by the two Saints, adored by kneeling angels with censers in their hands. A graphic model of the scene has been found; it is an engraving by Jan Sadeler (1550-1600 based on a design by Hans von Aachen (1552-1615, released in Munich in 1589 (il. 4. In Albertina, in Vienna, a working copy of the graphic made by Hans von Aachen has been preserved (il. 5 as well as a composition sketch by the same artist at the Herzog Anton Ulrich-Museum in Braunschweig. An inscription on the drawing from 1589 reads: POENA ET PROEMIVM; there are also quotations from psalms and a dedication to Phillip Wilhelm (1576-1598, bishop of Regenzburg in 1589, later cardinal (1596, son of a Bavarian ruler Wilhelm V Wittelsbach (1548-1626. The young hierarch got it in the year of his consecration as a bishop. A pendant to it is the plate by Jan Sadeler of 1590, after Peter Candid (1548-1628, which was dedicated to Phillip Wilhelm’s younger brother - Ferdinand (1577-1650, later bishop of Cologne. The engraving also shows St. Mary with the Child in the company of St. Stephen and St. Laurence. Both works coincide with the artistic activity of Jan Sadeler and Hans von Achen in Munich, where they were summoned by Wilhelm V, and represent strictly planned art created for his court. Another painted version of Sadeler’s engraving was found in a Polish private collection. This is a small, good painting on panel, faithfully reproducing physiognomy and inscriptions known from the

  11. Corrupting Capitalism: Michael Ende’s Momo and “Cathedral Station”

    Directory of Open Access Journals (Sweden)

    Heike Polster

    2016-01-01

    Full Text Available Michael Ende, the well-known author of The Neverending Story , foresaw dramatic changes in the fabric of society resulting from a turn toward neoliberal policies. One such far-reaching and dangerous change has to do with a diminishing of temporal autonomy, the ability to freely determine the use and meaning of our time. This article explores how neoliberalism is shaping our concept of time and our experience of it. In an effort to demonstrate the process and the line of reasoning behind the monetization of time, and to connect time to more qualitative considerations of the human condition, I shall demonstrate how Ende conceptualizes time as an integral part of the accumulation process of capitalism. I also discuss a fairly cryptic short story, “Cathedral Station,” that envisions “the mystery of money.” Utilizing Walter Benjamin’s critique issued in his 1921 fragment “Capitalism as Religion,” I outline Ende’s dystopian vision of the uncontested, unquestioned reign of capitalism as a religious cult. Read together, the novel and the short story offer a way of contrasting two extreme byproducts of capitalism’s colonization of time, namely what I would call an “ideology of work” and an “ideology of growth.” The first of these is a result of capitalism’s commodification of time according to liberal ideals such as choice, freedom, and self-interest. The second is a decidedly neoliberal phenomenon in that the “financialization of everything,” to use David Harvey’s phrase, results in the ever-present expectation of unlimited, exponential growth. By drawing out these two interconnected ideologies through close readings, the subtle processes of capitalism’s colonization of time are revealed.

  12. Effective atomic number and electron density of marble concrete

    International Nuclear Information System (INIS)

    Akkurt, I.; El-Khayatt, A.M.

    2013-01-01

    The effective atomic numbers (Z eff ) and effective electron density (N e ) of different type concrete have been measured and the results were compared with the calculation obtained using the mass attenuation coefficients (μ/ρ) obtained via XCOM in the photon energy range of 1 keV-100 GeV. Six different concrete in where marble has been used in the rate of 0, 5, 10, 15, 20, 25 %, has been used in the study. (author)

  13. Pulsed Thermography for Depth Profiling in Marble Sulfation

    Science.gov (United States)

    Bison, P.; Clarelli, F.; Vannozzi, A.

    2015-06-01

    Deterioration of stones is a complex problem and one of the main concern for people working in the field of conservation and restoration of cultural heritage. One important point in cultural heritage is to obtain information about the damage in a non-invasive way. By this paper, we propose a new non-invasive tool that permits evaluation of the thickness of (gypsum) grown (sulfation) on marble stones, using a mathematical model on data detected by pulsed infrared thermography.

  14. Radon and thoron emanation from various marble materials: impact on the workers

    International Nuclear Information System (INIS)

    Misdaq, M.A.; Amghar, A.

    2005-01-01

    Uranium ( 238 U) and thorium ( 232 Th) concentrations were measured inside different pulverized marble material samples by using a method based on determining detection efficiencies of the CR-39 and LR-115 II solid state nuclear track detectors for the emitted alpha particles. Radon ( 222 Rn) and thoron ( 220 Rn) alpha-activities per unit volume were evaluated inside and outside the marble samples studied. Radon emanation coefficient was determined for the considered marble samples. Alpha- and beta-activities per unit volume of air due to radon, thoron and their progenies were measured in the atmosphere of a marble factory. Equilibrium factors between radon and its progeny and thoron and its decay products were evaluated in the air of the studied marble factory. The committed equivalent doses due to short-lived radon decay products were determined in different regions of the respiratory tract of workers in the considered marble factory

  15. A prosopographical perspective of the musical trades of the Cathedral of Valencia in the time of Guillem de Podio, 1480-1505

    Directory of Open Access Journals (Sweden)

    Francesc Villanueva Serrano

    2018-01-01

    Full Text Available The musical activity in the cathedral of Valencia before the XVIth century is quite unknown. This study seeks to advance the knowledge of this subject focusing on the groups of people carrying out the different trades with responsibility in the organization and the musical practice between 1480-1505. This period comprises treatise writer Guillem de Podio’s chant schools mastery in the above mentioned cathedral. The perspective offered here is provided by the prosopography, using data from this institution, other cathedrals and documental sources with different features like notarial, diocesan and those preserved in civil and royal archives. On the other hand, this work has also allowed enough evidence to be presented to dismiss the current identification hypothesis between the composer Juan Rodríguez de Sanabria and the singer of Isabella I of Castile, Juan Rodríguez de la Torre. A prosopographical catalogue of all of the studied individuals is included in an appendix.

  16. MARBLE: A system for executing expert systems in parallel

    Science.gov (United States)

    Myers, Leonard; Johnson, Coe; Johnson, Dean

    1990-01-01

    This paper details the MARBLE 2.0 system which provides a parallel environment for cooperating expert systems. The work has been done in conjunction with the development of an intelligent computer-aided design system, ICADS, by the CAD Research Unit of the Design Institute at California Polytechnic State University. MARBLE (Multiple Accessed Rete Blackboard Linked Experts) is a system of C Language Production Systems (CLIPS) expert system tool. A copied blackboard is used for communication between the shells to establish an architecture which supports cooperating expert systems that execute in parallel. The design of MARBLE is simple, but it provides support for a rich variety of configurations, while making it relatively easy to demonstrate the correctness of its parallel execution features. In its most elementary configuration, individual CLIPS expert systems execute on their own processors and communicate with each other through a modified blackboard. Control of the system as a whole, and specifically of writing to the blackboard is provided by one of the CLIPS expert systems, an expert control system.

  17. Verde Macael: A Serpentinite Wrongly Referred to as a Marble

    Directory of Open Access Journals (Sweden)

    Santiago del Barrio

    2013-02-01

    Full Text Available Serpentinites are used in both exterior and interior locations, but not all serpentinites are equal: they vary in physical-mechanical behavior and are not all suitable for similar uses. The serpentinites most commonly used worldwide come from India, Pakistan or Egypt. Spain has traditionally quarried two ultramafic massifs, one in Galicia (Verde Pirineos and one in Andalucía (Verde Macael. Some of these quarries were small family-run businesses. In both cases, these rocks are commercially available as “green marble.” These serpentinites commonly have a high degree of carbonation, but the process does not always take place with the same intensity. Carbonate can act as a cementing agent of the other phases, increasing the mechanical strength parameters. As a result, an improvement in the strength conditions is achieved, but a misinterpretation of the suitability of the rock may occur because a perception among users that “green marble” is similar to geologically defined marble. This may lead to inappropriate applications as an ornamental stone. At a time of economic crisis in Europe, the natural stone sector is encouraged to invest in research to identify the best quality products that can compete profitably with those currently being imported from other countries. This paper provides a comparison of properties of the Verde Macael serpentinite with a true marble in the hope of contributing to improving the natural stone industrial sector.

  18. Development of gypsum alteration on marble and limestone

    Science.gov (United States)

    McGee, E.S.

    1996-01-01

    Blackened alteration crusts of gypsum plus particulates that form on sheltered areas on marble and limestone buildings pose a challenge for rehabilitation and cleaning. Fresh marble and limestone samples exposed at monitored exposure sites present conditions of simple geometry and well-documented exposures but have short exposure histories (one to five years). The gypsum alteration crusts that develop on these samples provide insight into the early stages and rate of alteration crust formation. Alteration crusts from buildings give a longer, but less well known exposure history and present much more complex surfaces for gypsum accumulation. Integrated observations and measurements of alteration crusts from exposure samples and from buildings identify four factors that are important in the formation and development of alteration crusts on marble and limestone: (1) pollution levels, (2) exposure to rain or washing, (3) geometry of exposure of the stone surface, and (4) permeability of the stone. The combination of these factors contributes to both the distribution and the physical characteristics of the gypsum crusts which may affect cleaning decisions.

  19. Crack Coalescence in Molded Gypsum and Carrara Marble

    Science.gov (United States)

    Wong, N.; Einstein, H. H.

    2007-12-01

    This research investigates the fracturing and coalescence behavior in prismatic laboratory-molded gypsum and Carrara marble specimens, which consist of either one or two pre-existing open flaws, under uniaxial compression. The tests are monitored by a high speed video system with a frame rate up to 24,000 frames/second. It allows one to precisely observe the cracking mechanisms, in particular if shear or tensile fracturing takes place. Seven crack types and nine crack coalescence categories are identified. The flaw inclination angle, the ligament length and the bridging angle between two flaws have different extents of influence on the coalescence patterns. For coplanar flaws, as the flaw inclination angle increases, there is a general trend of variation from shear coalescence to tensile coalescence. For stepped flaws, as the bridging angle changes from negative to small positive, and further up to large positive values, the coalescence generally progresses from categories of no coalescence, indirect coalescence to direct coalescence. For direct coalescence, it generally progresses from shear, mixed shear-tensile to tensile as the bridging angle increases. Some differences in fracturing and coalescence processes are observed in gypsum and marble, particularly the crack initiation in marble is preceded by the development of macroscopic white patches, but not in gypsum. Scanning Electron Microprobe (SEM) study reveals that the white patches consist of zones of microcracks (process zones).

  20. The Cathedral Chapter and the episcopate of Córdoba, from Old to New Regime (1789-1883

    Directory of Open Access Journals (Sweden)

    José García-Cuevas Ventura

    2018-02-01

    Full Text Available Frequently, dealing with the cathedral chapters was the more difficult question for the bishops during Old and New Regime. In the following pages, the contacts between the occupants of Oslo's see and its senate are studied, from 1789, year of preconization of Antonio Caballero, to 1883, the pontificate's end of Ceferino González. From the middle of the past century, the binomy bishopchapter was solved in the benefit of the first, and the unity of action reached its climax.

  1. Portraits and Colour-codes in ancient Rome: The Polychromy of white marble Portraits

    DEFF Research Database (Denmark)

    Skovmøller, Amalie

    The polychromy of ancient white marble sculpture has for the last 20 years become a focus of international awareness; from academics and the general public alike. Research results are gathered from scientific examinations of the “white” marbles, which unit e museums and universities in ambitious...... issues of colour on sculptural marble form, and which seeks to establish polychromy research in general within a traditional archaeological research field....

  2. Measuring the Coefficient of Friction of a Small Floating Liquid Marble.

    Science.gov (United States)

    Ooi, Chin Hong; Nguyen, Anh Van; Evans, Geoffrey M; Dao, Dzung Viet; Nguyen, Nam-Trung

    2016-12-02

    This paper investigates the friction coefficient of a moving liquid marble, a small liquid droplet coated with hydrophobic powder and floating on another liquid surface. A floating marble can easily move across water surface due to the low friction, allowing for the transport of aqueous solutions with minimal energy input. However, the motion of a floating marble has yet to be systematically characterised due to the lack of insight into key parameters such as the coefficient of friction between the floating marble and the carrier liquid. We measured the coefficient of friction of a small floating marble using a novel experimental setup that exploits the non-wetting properties of a liquid marble. A floating liquid marble pair containing a minute amount magnetite particles were immobilised and then released in a controlled manner using permanent magnets. The capillarity-driven motion was analysed to determine the coefficient of friction of the liquid marbles. The "capillary charge" model was used to fit the experimental results. We varied the marble content and carrier liquid to establish a relationship between the friction correction factor and the meniscus angle.

  3. Marble-hosted ruby deposits of the Morogoro Region, Tanzania

    Science.gov (United States)

    Balmer, Walter A.; Hauzenberger, Christoph A.; Fritz, Harald; Sutthirat, Chakkaphan

    2017-10-01

    The ruby deposits of the Uluguru and Mahenge Mts, Morogoro Region, are related to marbles which represent the cover sequence of the Eastern Granulites in Tanzania. In both localities the cover sequences define a tectonic unit which is present as a nappe structure thrusted onto the gneissic basement in a north-western direction. Based on structural geological observations the ruby deposits are bound to mica-rich boudins in fold hinges where fluids interacted with the marble-host rock in zones of higher permeability. Petrographic observations revealed that the Uluguru Mts deposits occur within calcite-dominated marbles whereas deposits in the Mahenge Mts are found in dolomite-dominated marbles. The mineral assemblage describing the marble-hosted ruby deposit in the Uluguru Mts is characterised by corundum-dolomite-phlogopite ± spinel, calcite, pargasite, scapolite, plagioclase, margarite, chlorite, tourmaline whereas the assemblage corundum-calcite-plagioclase-phlogopite ± dolomite, pargasite, sapphirine, titanite, tourmaline is present in samples from the Mahenge Mts. Although slightly different in mineral assemblage it was possible to draw a similar ruby formation history for both localities. Two ruby forming events were distinguished by textural differences, which could also be modeled by thermodynamic T-XCO2 calculations using non-ideal mixing models of essential minerals. A first formation of ruby appears to have taken place during the prograde path (M1) either by the breakdown of diaspore which was present in the original sedimentary precursor rock or by the breakdown of margarite to corundum and plagioclase. The conditions for M1 metamorphism was estimated at ∼750 °C at 10 kbar, which represents granulite facies conditions. A change in fluid composition towards a CO2 dominated fluid triggered a second ruby generation to form. Subsequently, the examined units underwent a late greenschist facies overprint. In the framework of the East African Orogen we

  4. Reinforcement of natural rubber hybrid composites based on marble sludge/Silica and marble sludge/rice husk derived silica

    Directory of Open Access Journals (Sweden)

    Khalil Ahmed

    2014-03-01

    Full Text Available A research has been carried out to develop natural rubber (NR hybrid composites reinforced with marble sludge (MS/Silica and MS/rice husk derived silica (RHS. The primary aim of this development is to scrutinize the cure characteristics, mechanical and swelling properties of such hybrid composite. The use of both industrial and agricultural waste such as marble sludge and rice husk derived silica has the primary advantage of being eco-friendly, low cost and easily available as compared to other expensive fillers. The results from this study showed that the performance of NR hybrid composites with MS/Silica and MS/RHS as fillers is extremely better in mechanical and swelling properties as compared with the case where MS used as single filler. The study suggests that the use of recently developed silica and marble sludge as industrial and agricultural waste is accomplished to provide a probable cost effective, industrially prospective, and attractive replacement to the in general purpose used fillers like china clay, calcium carbonate, and talc.

  5. Deterioration of the granitic stones of main front of the Vila Real Cathedral (N of Portugal

    Directory of Open Access Journals (Sweden)

    Gomes, M. E. P.

    2009-12-01

    Full Text Available The cathedral of Vila Real (North of Portugal is located in the city centre and at least four regional two-mica granites were used in its construction. A petrographic study of these granites concluded that the stones had different degrees of alterations. The identification of some physical properties of the granites –open porosity, real and apparent density, free water absorption, porometry and capillary transmission– confirms their susceptibility to degrees of weathering. A recent cleaning intervention was made and several types of deterioration were visible in the monument‚s stones, namely: granular disintegration, some thin black layers, plates, flakes and black crusts, especially in the main front exposed to SW. Granular disintegration is the most important deterioration process and is responsible for the loss of material in the most-affected stones; it is also related to the presence of small amounts of highly soluble salts such as halite and nitrates and to solar exposure.La Catedral de Vila Real (Norte de Portugal se encuentra en el centro de la ciudad y se han utilizado, al menos, cuatro granitos de dos micas para su construcción extraídos de sus alrededores. El estudio petrográfico de estos granitos pone de manifiesto que poseen un diferente grado de alteración. La determinación de algunas propiedades físicas de los granitos –porosidad abierta, densidad aparente y real, absorción libre de agua, porometría y capilaridad– confirman los distintos grados de alteración. La catedral ha sufrido una reciente limpieza y sobre las piedras de la Catedral se observan distintas formas de alteración, sobre todo desagregación granular (arenización, escasas pátinas finas negras, desplacaciones, escamas y costras negras, especialmente en la fachada principal, expuesta al SW. El fenómeno de la desagregación granular es el más importante y es el responsable de de la pérdida de material en las piedras más afectadas. Su g

  6. Macroscopical morphology of deterioration of the stone in the Cathedral of Seville, Spain

    Directory of Open Access Journals (Sweden)

    Alcalde, M.

    1990-09-01

    Full Text Available The lithotype mainly used in the construction of the Cathedral of Seville is the calcarenite from Puerto de Santa f/laria followed by the limestone from Espera. The primordial extrinsecal factor of deterioration is the atmospherical contamination, mainly sulphur oxides and smoke, within a humid environment. From both factors, the porose stone of a carbonated nature and the acid environment, we can deduce that the principal mechanism of deterioration is the chemical attack; the most important indicators of deterioration that have been found are the deposits and arenizations. In a "grosso modo" valoration we can say that the stone of structural employment is well conserved in its majority while the ornamental stone is degraded at 80%. Half the cresting is in a state of ruin and 20% of the tips have been removed or will have to be in the near future.

    El litotipo mayoritariamente empleado en la construcción de la Catedral de Sevilla es la calcarenita del Puerto de Santa María seguida de la caliza de Espera. El factor extrínseco de alteración primordial es la contaminación atmosférica, principalmente óxidos de azufre y humos, en ambiente húmedo. De ambos factores, piedra porosa de naturaleza carbonatada y medio ambiente ácido, puede deducirse que el principal mecanismo de alteración es el ataque químico y se ha encontrado que los indicadores de alteración más importantes son los depósitos y las arenizaciones. En una valoración a grosso modo puede decirse que la piedra de uso estructural se encuentra bien conservada en su mayor parte, y la ornamental degradada en un 80%. La mitad de las cresterías se encuentran en estado de ruina y un 20% de los remates han sido retirados o habrán de serlo próximamente.

  7. Selective sandstone deterioration in the cathedrals of Salamanca, Textural anisotropy as a cause

    Directory of Open Access Journals (Sweden)

    Martín Patino, María Teresa

    1994-09-01

    Full Text Available Textural sandstone anisotropy is related to the selective deterioration of such stone in buildings. The samples studied come from the Cathedrals of Salamanca. Stone fragments, cut in different directions with regard to the base supporting the ashlars in the wall, are studied by means of a binocular magnifying glass and the Scanning Electron Microscopy (SEM. This shows that the sandstone microfabric has a granular and a laminar microtexture, which correspond to different directions in the plane in question as regards the position of the ashlar. Either of these circumstances coincides with the stone surface on the outside of the building and affect its surface deterioration in a different way. The SEM images of deteriorated stone were compared with those of unaffected stone, with both types coming from differently orientated cuts as regards the position of the ashlar. In conclusion, the position given to the block of stone in the building is of importance for the preservation of the stone. The speed of ultrasound transmission measured in samples from commercial quarries confirms the textural sandstone anisotropy to a greater or lesser extent.

    La anisotropía textural de las areniscas se relaciona con la selectividad de su deterioro en los edificios. Las muestras estudiadas pertenecen a las Catedrales de Salamanca. Fragmentos de piedra, cortados en direcciones diferentes respecto a la base sobre la que se asientan los sillares en el muro, son estudiados por medio de la lupa binocular y del microscopio electrónico de barrido (SEM. De éstos se deduce que la microfábrica de las areniscas tiene una microtextura granular y otra laminar, que corresponden a direcciones diferentes del plano respecto al asiento del sillar. Una u otra de estas situaciones coincide con la superficie de la piedra expuesta al exterior en el edificio, y afectan a su deterioro superficial de forma diferente. Las capas externas en las que predomina la arcilla

  8. Influence of surrounding environment on subcritical crack growth in marble

    Science.gov (United States)

    Nara, Yoshitaka; Kashiwaya, Koki; Nishida, Yuki; , Toshinori, Ii

    2017-06-01

    Understanding subcritical crack growth in rock is essential for determining appropriate measures to ensure the long-term integrity of rock masses surrounding structures and for construction from rock material. In this study, subcritical crack growth in marble was investigated experimentally, focusing on the influence of the surrounding environment on the relationship between the crack velocity and stress intensity factor. The crack velocity increased with increasing temperature and/or relative humidity. In all cases, the crack velocity increased with increasing stress intensity factor. However, for Carrara marble (CM) in air, we observed a region in which the crack velocity still increased with temperature, but the increase in the crack velocity with increasing stress intensity factor was not significant. This is similar to Region II of subcritical crack growth observed in glass in air. Region II in glass is controlled by mass transport to the crack tip. In the case of rock, the transport of water to the crack tip is important. In general, Region II is not observed for subcritical crack growth in rock materials, because rocks contain water. Because the porosity of CM is very low, the amount of water contained in the marble is also very small. Therefore, our results imply that we observed Region II in CM. Because the crack velocity increased in both water and air with increasing temperature and humidity, we concluded that dry conditions at low temperature are desirable for the long-term integrity of a carbonate rock mass. Additionally, mass transport to the crack tip is an important process for subcritical crack growth in rock with low porosity.

  9. Hydroxycalciopyrochlore from a regionally metamorphic marble at Bližná, Southwestern Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Drábek, M.; Frýda, J.; Šarbach, M.; Skála, Roman

    2017-01-01

    Roč. 194, č. 1 (2017), s. 49-59 ISSN 0077-7757 Institutional support: RVO:67985831 Keywords : hydroxycalciopyrochlore * pyrochlore * carbonatite-like marble * marble * Moldanubian Varied Group Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Mineralogy Impact factor: 0.811, year: 2016

  10. Chapter 1: Ecology and Conservation of the Marbled Murrelet in North America: An Overview

    Science.gov (United States)

    C. John Ralph; Jr. Hunt; Martin G. Raphael; John F. Piatt

    1995-01-01

    Over the past decade, the Marbled Murrelet has become a focus of much controversy. It was listed as threatened in Washington, Oregon, and California by the U.S. Fish and Wildlife Service in February 1993. In order to aid the various agencies with management, the Marbled Murrelet Conservation Assessment was formed to bring together scientists, managers, and others to...

  11. Carbon and oxygen isotopic ratio bi-variate distribution for marble artifacts quarry assignment

    International Nuclear Information System (INIS)

    Pentia, M.

    1995-01-01

    Statistical description, by a Gaussian bi-variate probability distribution of 13 C/ 12 C and 18 O/ 16 O isotopic ratios in the ancient marble quarries has been done and the new method for obtaining the confidence level quarry assignment for marble artifacts has been presented. (author) 8 figs., 3 tabs., 4 refs

  12. Trend Analysis of Sales of Marble Product in Glister Success (Nig ...

    African Journals Online (AJOL)

    Marketing models are important in analyses and forecasting of performance of mineral markets. The sale trend of the past can be extrapolated into the future. This study sourced the sales of marble chipping in tons in Glister Success Ltd, Ilorin and modeled its performance in order to evaluate the performance of marble ...

  13. Decay mechanism of indoor porous opuka stone: a case study from the main altar located in the St. Vitus Cathedral, Prague (Czech Republic).

    Czech Academy of Sciences Publication Activity Database

    Přikryl, R.; Přikrylová, J.; Racek, M.; Weishauptová, Zuzana; Kreislová, K.

    2017-01-01

    Roč. 76, č. 7 (2017), č. článku 290. ISSN 1866-6280 Institutional support: RVO:67985891 Keywords : opuka stone * Prague * St.Vitus Cathedral * main altar * damage mechanisms * environmental monitoring Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Geology Impact factor: 1.569, year: 2016

  14. Optical transmission properties of Pentelic and Paros marble

    OpenAIRE

    Weigand Talavera, Rosa María; García, Pablo A.; Campos Acosta, Joaquín; Storch de Gracía, Jacobo

    2015-01-01

    AncientGreek and Roman sources report that the statue of Zeus in Olympia had a head, and in particular eyes, similar to the description of Zeus by Homer, so we think that the statue was visible to the human eye. Since the temple was 12mhigh, and had a small door and no windows, the illumination of the statue by conventionalmedia is questionable. The aimof this paper is to characterize the optical transmission of Paros and Pentelic marble to demonstrate that it was possible to have the Zeus te...

  15. 76 FR 26280 - Vermont Marble Power Division of Omya Inc.; Notice of Application Accepted for Filing, Soliciting...

    Science.gov (United States)

    2011-05-06

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2558-029] Vermont Marble... Marble Power Division of Omya Inc. e. Name of Project: Otter Creek Hydroelectric Project. f. Location.... Applicant Contact: Todd Allard, Operations Engineer, Vermont Marble Power Division of Omya Inc., 9987 Carver...

  16. 75 FR 18192 - Vermont Marble Power Division of Omya Inc.; Notice of Application Tendered for Filing with the...

    Science.gov (United States)

    2010-04-09

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2558-029] Vermont Marble.... Date Filed: March 31, 2010. d. Applicant: Vermont Marble Power Division of Omya Inc. e. Name of Project... Marble Power Division of Omya Inc., 9987 Carver Road, Suite 300, Cincinnati, OH 45242, (513) 387-4344. i...

  17. Statistical Analysis of 3-Point Bending Properties of Polymer Concretes Made From Marble Powder Waste, Sand Grains, and Polyester Resin

    Science.gov (United States)

    Benzannache, N.; Bezazi, A.; Bouchelaghem, H.; Boumaaza, M.; Amziane, S.; Scarpa, F.

    2018-01-01

    The mechanical performance of concrete polymer beams subjected to 3-point bending was investigated. The polymer concrete incorporates marble powder waste and quarry sand. The results obtained showed that the type of sand, and amount of marble powder and sand aggregate affected the resistance of the polymer concrete beams significantly. The marble waste increased their bending strength by reducing the porosity of polymer concrete.

  18. Environmental and economic aspects of using marble fine waste in the manufacture of facing ceramic materials

    Directory of Open Access Journals (Sweden)

    Zemlyanushnov Dmitriy Yur'evich

    2014-09-01

    Full Text Available This work considers economic expediency of using marble fine waste in facing ceramic materials manufacture by three-dimensional coloring method. Adding marble fine waste to the charge mixture reduces the production cost of the final product. This waste has a positive impact on the intensification of drying clay rocks and raw as a whole, which increases production efficiency. Using marble fine waste as a coloring admixture makes it possible to manufacture more environmentally friendly construction material with the use of wastes of hazard class 3 instead of class 4. At the same time, disposal areas and environmental load in the territories of mining and marble processing reduce significantly. Replacing ferrous pigments with manganese oxide for marble fine waste reduces the cost of the final product and the manufacture of facing ceramic brick of a wide range of colors - from dark brown to yellow.

  19. Kaks luustikku Tartu toomkirikust: arheoloogia ja osteoloogia andmed / Two skeletons from the Tartu Cathedral Cemetery: archaeological and osteological data

    Directory of Open Access Journals (Sweden)

    Martin Malve

    2011-01-01

    Full Text Available This article deals with two case studies based on the osteological obtained in the rescue excavations in the Cathedral of Tartu in 2001 and 2008 (fig. 1. The first case study focuses on the skeleton of the child who suffered from congenital syphilis. The grave has been dated to the end of the 17th or the beginning of the 18th century. The child had been buried in the eighth nave of the northern aisle of the Cathedral (fig. 3. The grave was, according to the Christian burial traditions, west-oriented with the head facing towards the east. A Swedish 1/6 öre, minted during the reign of King Charles XI (1600–1697, was recovered from the grave. The skeleton was relatively complete and well preserved (fig. 2. Based on the dental eruption, the age at death was 9 years ± 24 months. Sexually distinctive characteristics had not developed, and thus it was impossible to determine the sex of the child. Both the microscopical and radiological analyses revealed that the skeleton had indicators of congenital syphilis. Damage from gummatous osteomyelitis and periostitis were visible on the skull and on the axial and appendicular skeleton (fig. 6, while Hutchinson’s incisors and Mulberry molars were present among the teeth. Deformations and damage on the bones suggest that the child had suffered from the disease for quite a long time.The second case study discusses a beheaded man found from the eighth nave in the southern aisle of the Cathedral (fig. 3. The grave pit had a depth of 80 cm from the medieval floor surface of the church, which indicates that the burial dates from the Middle Ages. Also, the head of the deceased pointed to the west.The bones were well preserved (fig. 6. Sex was determined from the characteristics of the skull and the length of the right humerus. Calcification of the cranial sutures and cartilages suggests that the age of the man at death was probably 50+. Macroscopic examination of the skeleton revealed that the man had suffered

  20. A novel numerical model to predict the morphological behavior of magnetic liquid marbles using coarse grained molecular dynamics concepts

    Science.gov (United States)

    Polwaththe-Gallage, Hasitha-Nayanajith; Sauret, Emilie; Nguyen, Nam-Trung; Saha, Suvash C.; Gu, YuanTong

    2018-01-01

    Liquid marbles are liquid droplets coated with superhydrophobic powders whose morphology is governed by the gravitational and surface tension forces. Small liquid marbles take spherical shapes, while larger liquid marbles exhibit puddle shapes due to the dominance of gravitational forces. Liquid marbles coated with hydrophobic magnetic powders respond to an external magnetic field. This unique feature of magnetic liquid marbles is very attractive for digital microfluidics and drug delivery systems. Several experimental studies have reported the behavior of the liquid marbles. However, the complete behavior of liquid marbles under various environmental conditions is yet to be understood. Modeling techniques can be used to predict the properties and the behavior of the liquid marbles effectively and efficiently. A robust liquid marble model will inspire new experiments and provide new insights. This paper presents a novel numerical modeling technique to predict the morphology of magnetic liquid marbles based on coarse grained molecular dynamics concepts. The proposed model is employed to predict the changes in height of a magnetic liquid marble against its width and compared with the experimental data. The model predictions agree well with the experimental findings. Subsequently, the relationship between the morphology of a liquid marble with the properties of the liquid is investigated. Furthermore, the developed model is capable of simulating the reversible process of opening and closing of the magnetic liquid marble under the action of a magnetic force. The scaling analysis shows that the model predictions are consistent with the scaling laws. Finally, the proposed model is used to assess the compressibility of the liquid marbles. The proposed modeling approach has the potential to be a powerful tool to predict the behavior of magnetic liquid marbles serving as bioreactors.

  1. Large outbreaks of ciguatera after consumption of brown marbled grouper.

    Science.gov (United States)

    Chan, Thomas Y K

    2014-07-11

    Brown marbled grouper (Epinephelus fuscoguttatus) is an apex predator from coral reefs of the Indo-Pacific region. All five published case series of ciguatera after consumption of brown marbled grouper were reviewed to characterize the types, severity and chronicity of ciguatera symptoms associated with its consumption. Three of these case series were from large outbreaks affecting over 100-200 subjects who had eaten this reef fish served at banquets. Affected subjects generally developed a combination of gastrointestinal, neurological and, less commonly, cardiovascular symptoms. Gastrointestinal symptoms occurred early and generally subsided in 1-2 days. Some neurological symptoms (e.g., paresthesia of four limbs) could last for weeks or months. Sinus bradycardia and hypotension occurred early, but could be severe and prolonged, necessitating the timely use of intravenous fluids, atropine and dopamine. Other cardiovascular and neurological features included atrial ectopics, ventricular ectopics, dyspnea, chest tightness, PR interval >0.2 s, ST segment changes, polymyositis and coma. Concomitant alcohol consumption was associated with a much higher risk of developing bradycardia, hypotension and altered skin sensation. The public should realize that consumption of the high-risk fish (especially the ciguatoxin-rich parts and together with alcohol use) and repeated ciguatoxin exposures will result in more severe and chronic illness.

  2. Microchemical identification of macael white marble in some spanish monuments

    Directory of Open Access Journals (Sweden)

    Bello, M. A.

    1992-03-01

    Full Text Available The white marble from Macael quarries (Almería, Spain has been identified in some monuments of the Southern of Spain; the use of other white marble types has also been confirmed. The microchemical identification has been carried out by means a previously described graphical method (Bello and Martín,1991. Fourteen trace elements have been analyzed from both quarry and building material samples by using atomic absorption and flame emission spectrometry in order to apply the enrichment diagrams for trace elements (EDTE for identification purposes.

    Ha sido confirmado el empleo del mármol blanco procedente de las canteras de Macael (Almería en varios monumentos del Sur de España; también se ha constatado el empleo de otros tipos de mármol blanco. La identificación del mármol de Macael mediante técnicas microquícas ha sido realizada mediante un método gráfico propuesto por los autores (1. Han sido analizados catorce elementos traza en las muestras de cantera y de los edificios mediante espectrofotometría de absorción atómica y de emisión de llama, al objeto de construir los diagramas de enriquecimiento de elementos traza (EDTE, con fines de identificación.

  3. Radiation doses due to the natural radioactivity in Pakistan marble

    International Nuclear Information System (INIS)

    Tufail, M.; Iqbal, M.; Mirza, S.M.

    2000-01-01

    In view of its high potential for containing large amounts of radioactive materials and due to its wide-spread use as construction and facing material worldwide, radiation doses received from the marble used in dwellings have been determined. As a first step, specific activity measurements were made using a NaI(TI) gamma ray spectrometer using the spectrum stripping technique. For the samples studied, the average values of specific activities for 226 Ra, 232 Th and 40 K have been found to be 27, 26 and 58 Bg kg -1 respectively. The mesh-adaptive, volume-integral method based code INGRE (Mirza et al. 1991) gave calculated values of the dose equivalent rates inside the standard room (Tufail et al.,1994) due to 226 Ra, 232 Th and 40 K; these were found to lie between 5-77,12-52 and 1-11 nGy h -1 respectively. The values of whole body dose equivalent rates have been found to lie in the 27-108 nGy h -1 range. As these values are below internationally accepted maximum permissible values, therefore marble available in Pakistan can safely be used in dwellings as a construction material. (author)

  4. Rare earths in the Leadville Limestone and its marble derivates

    International Nuclear Information System (INIS)

    Jarvis, J.C.; Wildeman, T.R.; Banks, N.G.

    1975-01-01

    Samples of unaltered and metamorphosed Leadville Limestone (Mississippian, Colorado) were analyzed by neutron activation for ten rare-earth elements (REE). The total abundance of the REE in the least-altered limestone is 4-12 ppm, and their distribution patterns are believed to be dominated by the carbonate minerals. The abundances of the REE in the marbles and their sedimentary precursors are comparable but the distribution patterns are not. Eu is enriched over the other REE in the marbles, and stratigraphically upward in the formation (samples located progressively further from the heat source), the light REE become less enriched relative to the heavy REE. The Eu anomaly is attributed to its ability, unique among the REE, to change from the 3+ to 2+ oxidation state. Whether this results in preferential mobilization of the other REE or whether this reflects the composition of the pore fluid during metamorphism is unknown. Stratigraphically selective depletion of the heavy REE may be attributed to more competition for the REE between fluid and carbonate minerals in the lower strata relative to the upper strata. This competition could have been caused by changes in the temperature of the pore fluid or to the greater resistance to solution of the dolomite in the lower parts of the formation than the calcite in the upper parts

  5. Large Outbreaks of Ciguatera after Consumption of Brown Marbled Grouper

    Science.gov (United States)

    Chan, Thomas Y. K.

    2014-01-01

    Brown marbled grouper (Epinephelus fuscoguttatus) is an apex predator from coral reefs of the Indo-Pacific region. All five published case series of ciguatera after consumption of brown marbled grouper were reviewed to characterize the types, severity and chronicity of ciguatera symptoms associated with its consumption. Three of these case series were from large outbreaks affecting over 100–200 subjects who had eaten this reef fish served at banquets. Affected subjects generally developed a combination of gastrointestinal, neurological and, less commonly, cardiovascular symptoms. Gastrointestinal symptoms occurred early and generally subsided in 1–2 days. Some neurological symptoms (e.g., paresthesia of four limbs) could last for weeks or months. Sinus bradycardia and hypotension occurred early, but could be severe and prolonged, necessitating the timely use of intravenous fluids, atropine and dopamine. Other cardiovascular and neurological features included atrial ectopics, ventricular ectopics, dyspnea, chest tightness, PR interval >0.2 s, ST segment changes, polymyositis and coma. Concomitant alcohol consumption was associated with a much higher risk of developing bradycardia, hypotension and altered skin sensation. The public should realize that consumption of the high-risk fish (especially the ciguatoxin-rich parts and together with alcohol use) and repeated ciguatoxin exposures will result in more severe and chronic illness. PMID:25019942

  6. Large Outbreaks of Ciguatera after Consumption of Brown Marbled Grouper

    Directory of Open Access Journals (Sweden)

    Thomas Y. K. Chan

    2014-07-01

    Full Text Available Brown marbled grouper (Epinephelus fuscoguttatus is an apex predator from coral reefs of the Indo-Pacific region. All five published case series of ciguatera after consumption of brown marbled grouper were reviewed to characterize the types, severity and chronicity of ciguatera symptoms associated with its consumption. Three of these case series were from large outbreaks affecting over 100–200 subjects who had eaten this reef fish served at banquets. Affected subjects generally developed a combination of gastrointestinal, neurological and, less commonly, cardiovascular symptoms. Gastrointestinal symptoms occurred early and generally subsided in 1–2 days. Some neurological symptoms (e.g., paresthesia of four limbs could last for weeks or months. Sinus bradycardia and hypotension occurred early, but could be severe and prolonged, necessitating the timely use of intravenous fluids, atropine and dopamine. Other cardiovascular and neurological features included atrial ectopics, ventricular ectopics, dyspnea, chest tightness, PR interval >0.2 s, ST segment changes, polymyositis and coma. Concomitant alcohol consumption was associated with a much higher risk of developing bradycardia, hypotension and altered skin sensation. The public should realize that consumption of the high-risk fish (especially the ciguatoxin-rich parts and together with alcohol use and repeated ciguatoxin exposures will result in more severe and chronic illness.

  7. Coseismic microstructures of experimental fault zones in Carrara marble

    Science.gov (United States)

    Ree, Jin-Han; Ando, Jun-ichi; Han, Raehee; Shimamoto, Toshihiko

    2014-09-01

    Experimental fault zones developed in Carrara marble that were deformed at seismic slip rates (1.18-1.30 m s-1) using a high-velocity-rotary-shear apparatus exhibit very low friction (friction coefficient as low as 0.06) at steady state due to nanoparticle lubrication of the decomposition product (lime). The fault zones show a layered structure; a central slip-localization layer (5-60 μm thick) of lime nanograins mantled by gouge layers (5-150 μm thick) and a plastically deformed layer (45-500 μm thick) between the wall rock and gouge layer in the marginal portion of cylindrical specimens. Calcite grains of the wall rock adjacent to the slip zone deform by dislocation glide when subjected to frictional heating and a lower strain rate than that of the principal slip zone. The very fine (2-5 μm) calcite grains in the gouge layer show a foam structure with relatively straight grain boundaries and 120° triple junctions. This foam structure is presumed to develop by welding at high temperature and low strain once slip is localized along the central layer. We suggest that a seismic event can be inferred from deformed marbles, given: (i) the presence of welded gouge with foam structure in a fault zone where wall rocks show no evidence of thermal metamorphism and (ii) a thin plastically deformed layer immediately adjacent to the principal slip zone of a cataclastic fault zone.

  8. Non-invasive neutron diffraction analysis of marbles from the 'Edificio con Tre Esedre' in Villa Adriana

    International Nuclear Information System (INIS)

    Filabozzi, A.; Andreani, C.; Pietropaolo, A.; De Pascale, M.P.; Gorini, G.; Kockelmann, W.; Chapon, L.C.

    2006-01-01

    Roman marble fragments from the Villa Adriana at Tivoli (Rome) have been characterised by neutron diffraction. This study aimed at distinguishing between different marble types on the basis of the mineral phase compositions and the crystallographic textures. It is demonstrated that on a multi-detector time-offlight neutron diffractometer a quantitative bulk texture analysis can be performed on a stationary marble sample in a matter of minutes. This potentially allows investigating large sample series or bulky, intact marble objects in a completely nondestructive manner. The texture information, along with other structure details, can be used as characterising feature to address questions of attribution and restoration of archaeological marble objects

  9. Canon and archive in messages from Oslo Cathedral Square in the aftermath of July 22nd 2011

    Directory of Open Access Journals (Sweden)

    Sidsel Lied

    2013-08-01

    Full Text Available In this article we ask if central values which people were in dialogue with in the memorial messages from Oslo Cathedral Square in the aftermath of July 22nd 2011, may be seen as a part of Norwegian cultural memory, and if so, how. We answer this question in the affirmative, by elaborating on presentations of the Norwegian flag as a symbol of the values unity and solidarity, and on presentations of love and roses as weapons promoting the values love, humanity and calmness. In our discussion we have drawn on theory of cultural memory and suggested that the use of the Norwegian flag in the messages may be understood in the frame of Assmann’s term “canon”, representing the active part of cultural remembrance, and that the message from the use of roses and hearts may be understood in the frame of the term “archive”, representing the passive part of remembrance

  10. Deformation of ferrofluid marbles in the presence of a permanent magnet.

    Science.gov (United States)

    Nguyen, Nam-Trung

    2013-11-12

    This paper investigates the deformation of ferrofluid marbles in the presence of a permanent magnet. Ferrofluid marbles are formed using a water-based ferrofluid and 1 μm hydrophobic polytetrafluoride particles. A marble placed on a Teflon coated glass plate deforms under gravity. In the presence of a permanent magnet, the marble is further deformed with a larger contact area. The geometric parameters are normalized by the radius of an undistorted spherical marble. The paper first discusses a scaling relationship between the dimensionless radius of the contact area as well as the dimensionless height and the magnetic Bond number. The dimensionless contact radius is proportional to the fourth root of the magnetic bond number. The dimensionless height scales with the inverse square root of the magnetic Bond number. In the case of a moving marble dragged by a permanent magnet, the deformation is evaluated as the difference between advancing and receding curvatures of the top view. The dimensionless height and the contact diameter of the marble do not significantly depend on the speed or the capillary number. The scaling analysis and experimental data show that the deformation is proportional to the capillary number.

  11. Gene Co-expression Analysis to Characterize Genes Related to Marbling Trait in Hanwoo (Korean) Cattle.

    Science.gov (United States)

    Lim, Dajeong; Lee, Seung-Hwan; Kim, Nam-Kuk; Cho, Yong-Min; Chai, Han-Ha; Seong, Hwan-Hoo; Kim, Heebal

    2013-01-01

    Marbling (intramuscular fat) is an important trait that affects meat quality and is a casual factor determining the price of beef in the Korean beef market. It is a complex trait and has many biological pathways related to muscle and fat. There is a need to identify functional modules or genes related to marbling traits and investigate their relationships through a weighted gene co-expression network analysis based on the system level. Therefore, we investigated the co-expression relationships of genes related to the 'marbling score' trait and systemically analyzed the network topology in Hanwoo (Korean cattle). As a result, we determined 3 modules (gene groups) that showed statistically significant results for marbling score. In particular, one module (denoted as red) has a statistically significant result for marbling score (p = 0.008) and intramuscular fat (p = 0.02) and water capacity (p = 0.006). From functional enrichment and relationship analysis of the red module, the pathway hub genes (IL6, CHRNE, RB1, INHBA and NPPA) have a direct interaction relationship and share the biological functions related to fat or muscle, such as adipogenesis or muscle growth. This is the first gene network study with m.logissimus in Hanwoo to observe co-expression patterns in divergent marbling phenotypes. It may provide insights into the functional mechanisms of the marbling trait.

  12. Characterization of Genes for Beef Marbling Based on Applying Gene Coexpression Network

    Directory of Open Access Journals (Sweden)

    Dajeong Lim

    2014-01-01

    Full Text Available Marbling is an important trait in characterization beef quality and a major factor for determining the price of beef in the Korean beef market. In particular, marbling is a complex trait and needs a system-level approach for identifying candidate genes related to the trait. To find the candidate gene associated with marbling, we used a weighted gene coexpression network analysis from the expression value of bovine genes. Hub genes were identified; they were topologically centered with large degree and BC values in the global network. We performed gene expression analysis to detect candidate genes in M. longissimus with divergent marbling phenotype (marbling scores 2 to 7 using qRT-PCR. The results demonstrate that transmembrane protein 60 (TMEM60 and dihydropyrimidine dehydrogenase (DPYD are associated with increasing marbling fat. We suggest that the network-based approach in livestock may be an important method for analyzing the complex effects of candidate genes associated with complex traits like marbling or tenderness.

  13. Gene Co-expression Analysis to Characterize Genes Related to Marbling Trait in Hanwoo (Korean Cattle

    Directory of Open Access Journals (Sweden)

    Dajeong Lim

    2013-01-01

    Full Text Available Marbling (intramuscular fat is an important trait that affects meat quality and is a casual factor determining the price of beef in the Korean beef market. It is a complex trait and has many biological pathways related to muscle and fat. There is a need to identify functional modules or genes related to marbling traits and investigate their relationships through a weighted gene co-expression network analysis based on the system level. Therefore, we investigated the co-expression relationships of genes related to the ‘marbling score’ trait and systemically analyzed the network topology in Hanwoo (Korean cattle. As a result, we determined 3 modules (gene groups that showed statistically significant results for marbling score. In particular, one module (denoted as red has a statistically significant result for marbling score (p = 0.008 and intramuscular fat (p = 0.02 and water capacity (p = 0.006. From functional enrichment and relationship analysis of the red module, the pathway hub genes (IL6, CHRNE, RB1, INHBA and NPPA have a direct interaction relationship and share the biological functions related to fat or muscle, such as adipogenesis or muscle growth. This is the first gene network study with m.logissimus in Hanwoo to observe co-expression patterns in divergent marbling phenotypes. It may provide insights into the functional mechanisms of the marbling trait.

  14. The effects of air pollution and climatic factors on atmospheric corrosion of marble under field exposure

    International Nuclear Information System (INIS)

    Lan, Tran Thi Ngoc; Nishimura, Rokuro; Tsujino, Yoshio; Satoh, Yukihiro; Thi Phuong Thoa, Nguyen; Yokoi, Masayuki; Maeda, Yasuaki

    2005-01-01

    The atmospheric corrosion of marble was evaluated in terms of SO 2 concentration as air pollution and climatic factors such as rainfall, relative humidity, temperature and so on under the field exposure. Marble of calcite type (CaCO 3 ) was exposed to outdoor atmospheric environment with and without a rain shelter at four test sites in the southern part of Vietnam for 3-month, 1- and 2-year periods from July 2001 to September 2003. The thickness loss of marble was investigated gravimetrically. X-ray diffraction and X-ray fluorescent methods were applied to study corrosion products on marble. The corrosion product of marble was only gypsum (CaSO 4 . 2H 2 O) and was washed out by rain under the unsheltered exposure condition. It was found that the most substantial factors influencing the corrosion of marble were rainfall, SO 2 concentration in the air and relative humidity. Based on the results obtained, we estimated the dose-response functions for the atmospheric corrosion of marble in the southern part of Vietnam

  15. Dynamics of nanoparticle self-assembly into superhydrophobic liquid marbles during water condensation.

    Science.gov (United States)

    Rykaczewski, Konrad; Chinn, Jeff; Walker, Marlon L; Scott, John Henry J; Chinn, Amy; Jones, Wanda

    2011-12-27

    Nanoparticles adsorbed onto the surface of a drop can fully encapsulate the liquid, creating a robust and durable soft solid with superhydrophobic characteristics referred to as a liquid marble. Artificially created liquid marbles have been studied for about a decade but are already utilized in some hair and skin care products and have numerous other potential applications. These soft solids are usually formed in small quantity by depositing and rolling a drop of liquid on a layer of hydrophobic particles but can also be made in larger quantities in an industrial mixer. In this work, we demonstrate that microscale liquid marbles can also form through self-assembly during water condensation on a superhydrophobic surface covered with a loose layer of hydrophobic nanoparticles. Using in situ environmental scanning electron microscopy and optical microscopy, we study the dynamics of liquid marble formation and evaporation as well as their interaction with condensing water droplets. We demonstrate that the self-assembly of nanoparticle films into three-dimensional liquid marbles is driven by multiple coalescence events between partially covered droplets and is aided by surface flows causing rapid nanoparticle film redistribution. We also show that droplet and liquid marble coalescence can occur due to liquid-to-liquid contact or squeezing of the two objects into each other as a result of compressive forces from surrounding droplets and marbles. Irrelevant of the mechanism, coalescence of marbles and drops can cause their rapid movement across and rolling off the edge of the surface. We also demonstrate that the liquid marbles randomly moving across the surface can be captured and immobilized by hydrophilic surface patterns.

  16. Dynamic Loading of Carrara Marble in a Heated State

    Science.gov (United States)

    Wong, Louis Ngai Yuen; Li, Zhihuan; Kang, Hyeong Min; Teh, Cee Ing

    2017-06-01

    Useable land is a finite space, and with a growing global population, countries have been exploring the use of underground space as a strategic resource to sustain the growth of their society and economy. However, the effects of impact loading on rocks that have been heated, and hence the integrity of the underground structure, are still not fully understood and has not been included in current design standards. Such scenarios include traffic accidents and explosions during an underground fire. This study aims to provide a better understanding of the dynamic load capacity of Carrara marble at elevated temperatures. Dynamic uniaxial compression tests are performed on Carrara marble held at various temperatures using a split-Hopkinson Pressure Bar (SHPB) setup with varying input force. A customized oven is included in the SHPB setup to allow for testing of the marble specimens in a heated state. After the loading test, a three-wave analysis is performed to obtain the dynamic stress-strain curve of the specimen under loading. The fragments of the failed specimens were also collected and dry-sieved to obtain the particle size distribution. The results reveal that the peak stress of specimens that have been heated is negatively correlated with the heating temperature. However, the energy absorbed by the specimens at peak stress at all temperatures is similar, indicating that a significant amount of energy is dissipated via plastic deformation. Generally, fragment size is also found to show a negative correlation with heating temperature and loading pressure. However, in some cases this relationship does not hold true, probably due to the occurrence of stress shadowing. Linear Elastic Fracture Mechanics has been found to be generally applicable to specimens tested at low temperatures; but at higher temperatures, Elastic-Plastic Fracture Mechanics will give a more accurate prediction. Another contribution of this study is to show that other than the peak stress of the

  17. A Rb-Sr isotope study of a young granite sheet at Marble Delta, southern Natal

    International Nuclear Information System (INIS)

    Naidoo, D.D.; Eglington, B.M.; Harmer, R.E.

    1989-01-01

    Rb-Sr isotope data are presented for two apophyses of a granite sheet intrusive into marble at Marble Delta, southern Natal. Granite samples collected near the margins of these apophyses contain calcite and are thought to have been contaminated by the marble during intrusion of the granite magma. In contrast, those further away from contacts lack calcite. The 'uncontaminated' granite samples define an isochron date of 899 ± 11 Ma. This data is thought to represent the intrusive age of the granite sheet. 11 refs., 5 figs., 2 tabs

  18. DEGRADATION AND CONSERVATION OF MARBLE IN THE GREEK ROMAN HADRIANIC BATHS IN LEPTIS MAGNA, LIBYA

    OpenAIRE

    Nabil.A. ABD EL-TAWAB

    2012-01-01

    The Hadrianic Baths is one of the most important archaeological sites in Leptis Magna- Libya. It was built at the command of Emperor Hadrian in the early 2nd century CE; they represent some of the most lavish structures of Leptis Magna. It is unique in design and building technique. It was built of limestone, marble and brick. This paper mainly describes the deterioration of marble. The marble in the monuments can be classified into several types, based on its color, texture, chemical composi...

  19. Production and properties of artificial antimicrobial marble; Jushikei zinzo dairiseki no kokin kako

    Energy Technology Data Exchange (ETDEWEB)

    Amano, Ryozo; Miyamoto, Hiroyuki [INAX Corp., Aichi (Japan)

    1999-11-01

    There are many cases in which they are suitable for the growth of the microorganism on bathrooms and lavatories, kitchens, etc., which are the place where the artificial marble product is installed. Therefore, the generation of the fouling of the microorganism by the aberrant growth is also abounding. Then, it developed the antimicrobe artificial marble for the purpose of suppressing growth of bacteria in the surface of the product. Here, this paper describes the gist in doing antimicrobial treatment in the resin systems artificial marble product. (NEDO)

  20. Marble waste characterization as a desulfurizing slag component for steel

    International Nuclear Information System (INIS)

    Coleti, J.L.; Grillo, F.F.; Tenorio, J.A.S.; De Oliveira, J.R.

    2014-01-01

    The current steel market requires from steel plants better quality of its products. As a result, steel plants need to search for improvements and costs reduction in its process. Hence, the residue of marble containing significant quantities of calcium and magnesium carbonates, raw materials of steel refining slag, was characterized in order to replace the conventional lime used. Therefore, it will be possible to reduce the cost and volume of waste produced by the ornamental rock industry. The following methods were applied to test the waste potential: SEM with EDS, x-ray diffraction, x-ray fluorescence (EDX), Thermogravimetry (TG) and analysis of surface area and particle size by the BET method using dispersion leisure. The results indicated the feasibility of waste as raw material in the composition of desulfurizing slags. (author)

  1. EPR and TL correlation in some powdered Greek white marbles

    International Nuclear Information System (INIS)

    Baieetto, Vanessa; Villeneuve, Gerard; Guibert, Pierre; Schvoerer, Max

    2000-01-01

    Thermoluminescence of white powdered marble samples, chosen to display different EPR spectra, were studied. Two peaks at 280 deg. C and 360 deg. C can be observed among the TL glow curves while the EPR spectra exhibit two signals: the A signal with g perp =2.0038 and g par =2.0024 due to the SO - 3 centre and the B one with g 1 =2.0005; g 2 =2.0001; g 3 =1.9998 due to mechanical powder reduction (drilling). Owing to heating and simultaneous experiments, a correlation have been established: the 280 deg. C TL peak is associated to the A signal and thus to the SO - 3 centre and the 360 deg. C TL peak is caused by mechanical treatment corresponding to the B EPR signal

  2. EPR and TL correlation in some powdered Greek white marbles

    Energy Technology Data Exchange (ETDEWEB)

    Baieetto, Vanessa E-mail: crpaa@montaigne.u-bordeaux.fr; Villeneuve, Gerard; Guibert, Pierre; Schvoerer, Max

    2000-02-01

    Thermoluminescence of white powdered marble samples, chosen to display different EPR spectra, were studied. Two peaks at 280 deg. C and 360 deg. C can be observed among the TL glow curves while the EPR spectra exhibit two signals: the A signal with g{sub perp}=2.0038 and g{sub par} =2.0024 due to the SO{sup -}{sub 3} centre and the B one with g{sub 1}=2.0005; g{sub 2}=2.0001; g{sub 3}=1.9998 due to mechanical powder reduction (drilling). Owing to heating and simultaneous experiments, a correlation have been established: the 280 deg. C TL peak is associated to the A signal and thus to the SO{sup -}{sub 3} centre and the 360 deg. C TL peak is caused by mechanical treatment corresponding to the B EPR signal.

  3. EPR and TL correlation in some powdered Greek white marbles.

    Science.gov (United States)

    Baïetto, V; Villeneuve, G; Guibert, P; Schvoerer, M

    2000-02-01

    Thermoluminescence of white powdered marble samples, chosen to display different EPR spectra, were studied. Two peaks at 280 degrees C and 360 degrees C can be observed among the TL glow curves while the EPR spectra exhibit two signals: the A signal with g perpendicular = 2.0038 and g parallel = 2.0024 due to the SO3- centre and the B one with g1 = 2.0005; g2 = 2.0001; g3 = 1.9998 due to mechanical powder reduction (drilling). Owing to heating and simultaneous experiments, a correlation have been established: the 280 degrees C TL peak is associated to the A signal and thus to the SO3- centre and the 360 degrees C TL peak is caused by mechanical treatment corresponding to the B EPR signal.

  4. Macroscopical morphology of deterioration of the stone used in the cathedral whole of Granada/Spain

    Directory of Open Access Journals (Sweden)

    Alcalde, M.

    1992-06-01

    Full Text Available The main factors of deterioration that affect the Cathedral Whole of Granada are one of natural thermic origin due to the low temperatures during the winters and the higher thermic oscillations and those of anthropogenical origin: fundamentally the oxidation of metallic elements and atmospheric pollution due to burnt products. For this reason, the more important deterioration mechanisms are the freezing ones due to the expansion produced in the water retained inside the pores and microcracks, fundamentally in the architectonic elements with high expositional surface and in their shady orientation; the main indicators produced are fissuring and spalling. In this way, a lot of elements of Santa Pudia stone located in the Royal Chapel crenellations have disappeared and the rest are very deteriorated. The more compact Sierra Elvira stone used on the upper zone of the cornices has also been affected by the freezing mechanism, which starts with the microcracks produced by differential dilatations due to the thermic oscillations which made the water access easy. The iron corrosion and later expansion of the oxidation products has provoked the cracking and fissuring of many ornamental elements like balls, pinnacles, etc, and this situation has obliged their dismantling on the upper zones due to the danger to the public. The mechanisms of dissolution, crystallization cycles and Chemical action have led to abundant material loosening in the form of grain disgregations overcoats on the higher humidity zones, and formation of hollows (pitting, alveolar erosion, striations in the zones more exposed to the winds. This situation is generalized in the lower zones of the monument, except on the main facade, and in the parapets and lower zones of the cornices. The grain disgregations are more important when biological crusts or unburned deposits exist, the latter being of major abundance on the surfaces near the Gran Vía and in its orientation. It is necessary

  5. Detection of endolithic spatial distribution in marble stone.

    Science.gov (United States)

    Casanova Municchia, A; Percario, Z; Caneva, G

    2014-10-01

    The penetration of endolithic microorganisms, which develop to depths of several millimetres or even centimetres into the stone, and the diffusion of their extracellular substances speeds up the stone deterioration process. The aim of this study was to investigate, using a confocal laser scanning microscopy with a double-staining, a marble rock sample by observing the endolithic spatial distribution and quantifying the volume they occupied within the stone, in order to understand the real impact of these microorganisms on the conservation of stone monuments. Often the only factors taken into account by biodeterioration studies regarding endolithic microorganisms, are spread and depth of penetration. Despite the knowledge of three-dimensional spatial distribution and quantification of volume, it is indispensable to understand the real damage caused by endolithic microorganisms to stone monuments. In this work, we analyze a marble rock sample using a confocal laser scanning microscopy stained with propidium iodide and Concavalin-A conjugate with the fluorophore Alexa Fluor 488, comparing these results with other techniques (SEM microscope, microphotographs of polished cross-sections and thin-section, PAS staining methods), An image analysis approach has also been applied. The use of confocal laser scanning microscopy with double staining shows clear evidence of the presence of endolithic microorganisms (cyanobacteria and fungi) as well as the extracellular polymeric substance matrix in a three-dimensional architecture as part of the rock sample, this technique, therefore, seems very useful when applied to restoration interventions on stone monuments when endolithic growth is suspected. © 2014 The Authors Journal of Microscopy © 2014 Royal Microscopical Society.

  6. Ground-penetrating radar investigation of St. Leonard's Crypt under the Wawel Cathedral (Cracow, Poland) - COST Action TU1208

    Science.gov (United States)

    Benedetto, Andrea; Pajewski, Lara; Dimitriadis, Klisthenis; Avlonitou, Pepi; Konstantakis, Yannis; Musiela, Małgorzata; Mitka, Bartosz; Lambot, Sébastien; Żakowska, Lidia

    2016-04-01

    The Wawel ensemble, including the Royal Castle, the Wawel Cathedral and other monuments, is perched on top of the Wawel hill immediately south of the Cracow Old Town, and is by far the most important collection of buildings in Poland. St. Leonard's Crypt is located under the Wawel Cathedral of St Stanislaus BM and St Wenceslaus M. It was built in the years 1090-1117 and was the western crypt of the pre-existing Romanesque Wawel Cathedral, so-called Hermanowska. Pope John Paul II said his first Mass on the altar of St. Leonard's Crypt on November 2, 1946, one day after his priestly ordination. The interior of the crypt is divided by eight columns into three naves with vaulted ceiling and ended with one apse. The tomb of Bishop Maurus, who died in 1118, is in the middle of the crypt under the floor; an inscription "+ MAVRVS EPC MCXVIII +" indicates the burial place and was made in 1938 after the completion of archaeological works which resulted in the discovery of this tomb. Moreover, the crypt hosts the tombs of six Polish kings and heroes: Michał Korybut Wiśniowiecki (King of the Polish-Lithuanian Commonwealth), Jan III Sobieski (King of the Polish-Lithuanian Commonwealth and Commander at the Battle of Vienna), Maria Kazimiera (Queen of the Polish-Lithuanian Commonwealth and consort to Jan III Sobieski), Józef Poniatowski (Prince of Poland and Marshal of France), Tadeusz Kościuszko (Polish general, revolutionary and a Brigadier General in the American Revolutionary War) and Władysław Sikorski (Prime Minister of the Polish Government in Exile and Commander-in-Chief of the Polish Armed Forces). The adjacent six crypts and corridors host the tombs of the other Polish kings, from Sigismund the Old to Augustus II the Strong, their families and several Polish heroes. In May 2015, the COST (European COoperation in Science and Technology) Action TU1208 "Civil engineering applications of Ground Penetrating Radar" organised and offered a Training School (TS) on the

  7. Sequencing and Characterization of Divergent Marbling Levels in the Beef Cattle ( Muscle Transcriptome

    Directory of Open Access Journals (Sweden)

    Dong Chen

    2015-02-01

    Full Text Available Marbling is an important trait regarding the quality of beef. Analysis of beef cattle transcriptome and its expression profile data are essential to extend the genetic information resources and would support further studies on beef cattle. RNA sequencing was performed in beef cattle using the Illumina High-Seq2000 platform. Approximately 251.58 million clean reads were generated from a high marbling (H group and low marbling (L group. Approximately 80.12% of the 19,994 bovine genes (protein coding were detected in all samples, and 749 genes exhibited differential expression between the H and L groups based on fold change (>1.5-fold, p<0.05. Multiple gene ontology terms and biological pathways were found significantly enriched among the differentially expressed genes. The transcriptome data will facilitate future functional studies on marbling formation in beef cattle and may be applied to improve breeding programs for cattle and closely related mammals.

  8. Petrology and geochemistry of the marbles and calcosilicated rocks from Ipira, Bahia - Brazil

    International Nuclear Information System (INIS)

    Oliveira, M.A.F.T. de.

    1976-01-01

    This work explains a study of marbles and diopsitites from Serra das Panelas, Ipira, Bahia, Brazil. Petrographic analysis, chemistry some elements, trace elements and rare earths, isotopic analysis of Strontium, carbon and oxigen, and geochronological determinations were done. The ages founded correspond to Transamazonic Orogenetic cicle, with Archean age, confirmed by the 18 O values found, which give to marble, ages about 2.500 my. The mineralogy and the texture give to marble an invulgar aspect, making a confusion with carbonate. The petrochemical data and the geochemistry of 13 C and 18 O isotopes showed that the marble and diopsitites was formed from the old marine carbonates. The geochemistry of rare earth suggests a strong correlation with carbonitic and alkaline rocks. An hybrid origem to this rocks is proposed. (C.D.G.) [pt

  9. Utah Marbles and Mars Blueberries: Comparitive Terrestrial Analogs for Hematite Concretions on Mars

    Science.gov (United States)

    Chan, M. A.; Beitler, B.; Parry, W. T.; Ormö, J.; Komatsu, G.

    2005-03-01

    Compelling comparisons show why Utah iron oxide-cemented "marbles" are a good analog for Mars hematite "blueberries". Terrestrial examples offer valuable models for interpreting the diagenetic history and importance of water on Mars.

  10. Monolayer nanoparticle-covered liquid marbles derived from a sol-gel coating

    Science.gov (United States)

    Li, Xiaoguang; Wang, Yiqi; Huang, Junchao; Yang, Yao; Wang, Renxian; Geng, Xingguo; Zang, Duyang

    2017-12-01

    A sol-gel coating consisting of hydrophobic SiO2 nanoparticles (NPs) was used to produce monolayer NP-covered (mNPc) liquid marbles. The simplest approach was rolling a droplet on this coating, and an identifiable signet allowed determination of the coverage ratio of the resulting liquid marble. Alternatively, the particles were squeezed onto a droplet surface with two such coatings, generating surface buckling from interfacial NP jamming, and then a liquid marble was produced via a jamming-relief process in which water was added into the buckled droplet. This process revealed an ˜7% reduction in particle distance after interfacial jamming. The mNPc liquid marbles obtained by the two methods were transparent with smooth profiles, as naked droplets, and could be advantageously used in fundamental and applied researches for their unique functions.

  11. Determination of geochemical and natural radioactivity characteristics in Bilecik Marble, Turkey

    Science.gov (United States)

    Yerel Kandemir, Suheyla; Ozbay, Nurgul

    2014-05-01

    Natural stones are one of the oldest known building materials. There are more than 400 natural stone in Turkey. Recently, the demand for the natural stone types in markets has been increasing rapidly. For this reason, the geochemical and natural radioactivity characteristics of natural stone are very important. Bilecik province is located at the northwest part of Turkey and it is surrounded by Sakarya, Bursa, Eskisehir and Kutahya city. Bilecik is one of the important marble industry regions of Turkey. Thus, the geochemical and natural radioactivity characteristics of Bilecik marble are very important. In this study, Bilecik marble was collected to determine the geochemistry and natural radioactivity. Then, analyses of geochemical and natural radioactivity in the marble samples are interpreted. ACKNOWLEDGMENT This study is supported by Bilecik Seyh Edebali University scientific project (Project Number =2011-02-BIL.03-04).

  12. An analysis of the black crusts from the Seville Cathedral: A challenge to deepen the understanding of the relationships among microstructure, microchemical features and pollution sources

    International Nuclear Information System (INIS)

    Ruffolo, Silvestro A.; Comite, Valeria; La Russa, Mauro F.; Belfiore, Cristina M.; Barca, Donatella; Bonazza, Alessandra; Crisci, Gino M.; Pezzino, Antonino

    2015-01-01

    The Cathedral of Seville is one of the most important buildings in the whole of southern Spain. It suffers, like most of the historical buildings located in urban environments, from several degradation phenomena related to the high pollution level. Undoubtedly, the formation of black crusts plays a crucial role in the decay of the stone materials belonging to the church. Their formation occurs mainly on carbonate building materials, whose interaction with a sulfur oxide-enriched atmosphere leads to the transformation of calcium carbonate (calcite) into calcium sulfate dihydrate (gypsum) which, together with embedded carbonaceous particles, forms the black crusts on the stone surface. To better understand the composition and the formation dynamics of this degradation product and to identify the pollutant sources and evaluate their impact on the stone material, an analytical study was carried out on the black crust samples collected from different areas of the building. For a complete characterization of the black crusts, several techniques were used, including laser ablation inductively coupled plasma mass spectrometry, Fourier transform infrared spectroscopy, micro infrared spectroscopy, optical and scanning electron microscopy. This battery of tests provided information about the nature and distribution of the mineralogical phases and the elements within the crusts and the crust-substrate interface, contributing to the identification of the major pollution sources responsible for the deterioration of the monument over time. In addition, the results revealed a relation among the height of sampling, the surface exposure and the concentration of heavy metals. Finally, information has been provided about the origin of the concentration gradients of some metals. - Highlights: • Black crusts from the Cathedral of Seville have been studied. • The impact of the pollution on the Cathedral of Seville has been assessed. • A geochemical study has been performed on black

  13. Non-invasive Geophysical Surveys in Search of the Roman Temple of Augustus Under the Cathedral of Tarragona (Catalonia, Spain): A Case Study

    Science.gov (United States)

    Casas, Albert; Cosentino, Pietro L.; Fiandaca, Gianluca; Himi, Mahjoub; Macias, Josep M.; Martorana, Raffaele; Muñoz, Andreu; Rivero, Lluís; Sala, Roger; Teixell, Imma

    2018-04-01

    An integrated geophysical survey has been conducted at the Tarragona's Cathedral (Catalonia, NE Spain) with the aim to confirm the potential occurrence of archaeological remains of the Roman Temple dedicated to the Emperor Augustus. Many hypotheses have been proposed about its possible location, the last ones regarding the inner part of the Cathedral, which is one of the most renowned temples of Spain (twelfth century) evolving from Romanesque to Gothic styles. A geophysical project including electrical resistivity tomography (ERT) and ground probing radar (GPR) was planned over 1 year considering the administrative and logistic difficulties of such a project inside a cathedral of religious veneration. Finally, both ERT and GPR have been conducted during a week of intensive overnight surveys that provided detailed information on subsurface existing structures. The ERT method has been applied using different techniques and arrays, ranging from standard Wenner-Schlumberger 2D sections to full 3D electrical imaging with the advanced Maximum Yield Grid array. Electrical resistivity data were recorded extensively, making available many thousands of apparent resistivity data to obtain a complete 3D image after a full inversion. In conclusion, some significant buried structures have been revealed providing conclusive information for archaeologists. GPR results provided additional information about shallowest structures. The geophysical results were clear enough to persuade religious authorities and archaeologists to conduct selected excavations in the most promising areas that confirmed the interpretation of geophysical data. In conclusion, the significant buried structures revealed by geophysical methods under the cathedral were confirmed by archaeological digging as the basement of the impressive Roman Temple that headed the Provincial Forum of Tarraco, seat of the Concilium of Hispania Citerior Province.

  14. An analysis of the black crusts from the Seville Cathedral: A challenge to deepen the understanding of the relationships among microstructure, microchemical features and pollution sources

    Energy Technology Data Exchange (ETDEWEB)

    Ruffolo, Silvestro A., E-mail: silvestro.ruffolo@unical.it [Università della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Via Pietro Bucci 87036, Arcavacata di Rende, CS (Italy); Comite, Valeria [Università della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Via Pietro Bucci 87036, Arcavacata di Rende, CS (Italy); Dipartimento di Scienze Biologiche, Geologiche e Ambientali–Sezione di Scienze della Terra, Università di Catania, Corso Italia 57, 95129 Catania (Italy); La Russa, Mauro F. [Università della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Via Pietro Bucci 87036, Arcavacata di Rende, CS (Italy); Belfiore, Cristina M. [Università della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Via Pietro Bucci 87036, Arcavacata di Rende, CS (Italy); Dipartimento di Scienze Biologiche, Geologiche e Ambientali–Sezione di Scienze della Terra, Università di Catania, Corso Italia 57, 95129 Catania (Italy); Barca, Donatella [Università della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Via Pietro Bucci 87036, Arcavacata di Rende, CS (Italy); Bonazza, Alessandra [Istituto di Scienze dell' Atmosfera e del Clima, ISAC-CNR, Via Gobetti 101, 40129 Bologna (Italy); Crisci, Gino M. [Università della Calabria, Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), Via Pietro Bucci 87036, Arcavacata di Rende, CS (Italy); Pezzino, Antonino [Dipartimento di Scienze Biologiche, Geologiche e Ambientali–Sezione di Scienze della Terra, Università di Catania, Corso Italia 57, 95129 Catania (Italy); and others

    2015-01-01

    The Cathedral of Seville is one of the most important buildings in the whole of southern Spain. It suffers, like most of the historical buildings located in urban environments, from several degradation phenomena related to the high pollution level. Undoubtedly, the formation of black crusts plays a crucial role in the decay of the stone materials belonging to the church. Their formation occurs mainly on carbonate building materials, whose interaction with a sulfur oxide-enriched atmosphere leads to the transformation of calcium carbonate (calcite) into calcium sulfate dihydrate (gypsum) which, together with embedded carbonaceous particles, forms the black crusts on the stone surface. To better understand the composition and the formation dynamics of this degradation product and to identify the pollutant sources and evaluate their impact on the stone material, an analytical study was carried out on the black crust samples collected from different areas of the building. For a complete characterization of the black crusts, several techniques were used, including laser ablation inductively coupled plasma mass spectrometry, Fourier transform infrared spectroscopy, micro infrared spectroscopy, optical and scanning electron microscopy. This battery of tests provided information about the nature and distribution of the mineralogical phases and the elements within the crusts and the crust-substrate interface, contributing to the identification of the major pollution sources responsible for the deterioration of the monument over time. In addition, the results revealed a relation among the height of sampling, the surface exposure and the concentration of heavy metals. Finally, information has been provided about the origin of the concentration gradients of some metals. - Highlights: • Black crusts from the Cathedral of Seville have been studied. • The impact of the pollution on the Cathedral of Seville has been assessed. • A geochemical study has been performed on black

  15. Making Marble Tracks Can Involve Lots of Fun as Well as STEM Learning

    Science.gov (United States)

    Nagel, Bert

    2015-01-01

    Marble tracks are a very popular toy and big ones can be found in science centres in many countries. If children want to make a marble track themselves it is quite a job. It takes a long time, they can take up a lot of space and most structures are quite fragile, as the materials used can very quickly prove unfit for the task and do not last very…

  16. EPR OF Mn2+ IMPURITIES IN CALCITE: A DETAILED STUDY PERTINENT TO MARBLE PROVENANCE DETERMINATION

    DEFF Research Database (Denmark)

    Weihe, H.; Piligkos, S.; Barra, A.L.

    2009-01-01

    We demonstrate that the electron paramagnetic resonance spectrum of Mn2+ impurities in calcite, and therefore also in marble, may be accurately reproduced by a traditional spin Hamiltonian formalism. The success of such a treatment, however, very much depends on the spin Hamiltonian parameters...... having the correct signs as well as magnitudes. We present data that determine the sign of the axial anisotropy parameter and thereby facilitate future quantum mechanical characterizations of marble electron paramagnetic resonance spectra that supplement provenance determination....

  17. Mechanical Assessment of Fire Damage of the Ancient Greek Temple of Marble Stone

    OpenAIRE

    山田, 眞生

    2016-01-01

    Historical masonry heritages buildings existing in earthquake-prone countries have been affected many times by earthquakes in their long histories. The Parthenon, Athens in Greece is one of the most famous buildings, and it well known that the Parthenon was damaged seriously by earthquakes and especially human disasters. Therefore, restoration works have been performed carefully since 1975. In addition, marble stone constructions, for example marble column, also suffered serious damage by two...

  18. Impact of marbling art therapy activities on the anxiety levels of psychiatric patients

    OpenAIRE

    Utaş Akhan, Latife; Atasoy, Nuray

    2017-01-01

    Purpose: Study was conducted to explore the impact of marbling art therapy on the anxiety levels of patients with schizophrenia and bipolar disorder.Methods: Data for the study were at a university hospital and in the psychiatric service,polyclinic of a State Hospital with 34 patients diagnosed with schizophrenia and 34 patients diagnosed with bipolar disorder. Investigations were carried out with study groups and a control group.Findings:Following marbling, it was found that there were signi...

  19. GC/MS in the study of deterioration process of historical monuments: characterization of the black crust formed in the Cathedral of Seville

    International Nuclear Information System (INIS)

    Reyes, J.; Hermosin, B.; Saiz J, C.

    2006-01-01

    Here, we present an interesting application of Gas Chromatography/Mass Spectrometry (GC/MS) technique which permitted to differentiate successfully between natural and anthropogenic compounds present in the black crust formed in the Cathedral of Seville. This building, considered as one of the most important historic and cultural European monuments suffers from intense blackening of its outside walls and sculptures due to the interaction with the urban environment. Fragment of black crusts were removed from the Cathedral walls and extraction process with organic solvents was carried out. The aliphatic, aromatic and polar fractions were separated and analyzed using GC/MS. A complex organic composition of the black crusts indicated the accumulative character of the deposition process of atmospheric particles as a function of the time. The presence of high molecular weight n-alkanes, n-fatty acids and natural molecular markers identified during the study were indicative of current biogenic contributions. It was also found an important group of petrogenic molecular markers related with diesel soot emissions from motor engines. The diesel soot and molecular markers were entrapped within the black crust mineral matrix and contribute to the observed blackening of the Seville Cathedral. (Author)

  20. Maringá and its historical heritage: a case study on the cathedral of the Assumption - doi: 10.4025/actascitechnol.v35i4.11063

    Directory of Open Access Journals (Sweden)

    Leonardo Cassimiro Barbosa

    2013-10-01

    Full Text Available The most tangible register of a civilization’s evolution is the heritage it preserves over the years. It is a vehicle for the transmission of peoples’ memory and culture. Although the city of Maringa in the state of Paraná, Brazil, is just 66 years old, it has several important buildings within its urban context whose preservation is not guaranteed by law. In fact, they are in danger of disappearing amid the city’s fast growth. Current research, surveying the preservation state of historical buildings in the municipality, is based on published studies, research at the City Hall, reports by the Historical Heritage Commission and in loco visits, with special emphasis on the Cathedral of the Assumption, the city’s symbol, whose preservation is still not legally guaranteed. The history of the building of the Cathedral, its most relevant external and internal architectonic features and its furniture for future inventories are focused. Current study raised the historic deployment of the Cathedral, its most relevant architectural features, both exterior and interior, including some of its details, to serve as a basis for inventories for future legal registrations and interventions.  

  1. Influence of porosity on artificial deterioration of marble and limestone by heating

    Science.gov (United States)

    Sassoni, Enrico; Franzoni, Elisa

    2014-06-01

    Testing of stone consolidants to be used on-site, as well as research on new consolidating products, requires suitable stone samples, with deteriorated but still uniform and controllable characteristics. Therefore, a new methodology to artificially deteriorate stone samples by heating, exploiting the anisotropic thermal deformation of calcite crystals, has recently been proposed. In this study, the heating effects on a variety of lithotypes was evaluated and the influence of porosity in determining the actual heating effectiveness was specifically investigated. One marble and four limestones, having comparable calcite amounts but very different porosity, were heated at 400 °C for 1 hour. A systematic comparison between porosity, pore size distribution, water absorption, sorptivity and ultrasonic pulse velocity of unheated and heated samples was performed. The results of the study show that the initial stone porosity plays a very important role, as the modifications in microstructural, physical and mechanical properties are way less pronounced for increasing porosity. Heating was thus confirmed as a very promising artificial deterioration method, whose effectiveness in producing alterations that suitably resemble those actually experienced in the field depends on the initial porosity of the stone to be treated.

  2. Switchable Opening and Closing of a Liquid Marble via Ultrasonic Levitation.

    Science.gov (United States)

    Zang, Duyang; Li, Jun; Chen, Zhen; Zhai, Zhicong; Geng, Xingguo; Binks, Bernard P

    2015-10-27

    Liquid marbles have promising applications in the field of microreactors, where the opening and closing of their surfaces plays a central role. We have levitated liquid water marbles using an acoustic levitator and, thereby, achieved the manipulation of the particle shell in a controlled manner. Upon increasing the sound intensity, the stable levitated liquid marble changes from a quasi-sphere to a flattened ellipsoid. Interestingly, a cavity on the particle shell can be produced on the polar areas, which can be completely healed when decreasing the sound intensity, allowing it to serve as a microreactor. The integral of the acoustic radiation pressure on the part of the particle surface protruding into air is responsible for particle migration from the center of the liquid marble to the edge. Our results demonstrate that the opening and closing of the liquid marble particle shell can be conveniently achieved via acoustic levitation, opening up a new possibility to manipulate liquid marbles coated with non-ferromagnetic particles.

  3. Role of marble microstructure in near-infrared laser-induced damage during laser cleaning

    International Nuclear Information System (INIS)

    Rodriguez-Navarro, Carlos; Rodriguez-Navarro, Alejandro; Elert, Kerstin; Sebastian, Eduardo

    2004-01-01

    When marble is cleaned by nanosecond neodymium yttrium-aluminum-garnet lasers (1064 nm), strongly absorbing surface contaminants are removed at fluences substantially below the damage threshold for the much less absorptive marble substrate. Recent studies have shown, however, that unacceptable roughening of the marble surface also may occur at low fluences due to removal of individual grains. In order to elucidate this effect, we have compared the low-fluence response of marbles with two different grain sizes and single-crystal calcite, in the fluence range 0.12-1.25 J cm-2. Damage was greater in fine-grained than coarse-grained marble, and did not occur in the single-crystal calcite at these fluences. The temperature rise following defect-mediated absorption triggers thermal plasma emission and generates shock waves; the concomitant surface damage depends on the size and crystallographic orientation of the crystals. Laser irradiation anneals the defects and increases ''crystallite size.'' The implications for the laser-assisted cleaning of marble artworks are outlined

  4. Laboratory Investigations for the Role of Flushing Media in Diamond Drilling of Marble

    Science.gov (United States)

    Bhatnagar, A.; Khandelwal, Manoj; Rao, K. U. M.

    2011-05-01

    Marble is used as a natural stone for decorative purposes from ages. Marble is a crystalline rock, composed predominantly of calcite, dolomite or serpentine. The presence of impurities imparts decorative pattern and colors. The diamond-based operations are extensively used in the mining and processing of marble. Marble is mined out in the form of blocks of cuboids shape and has to undergo extensive processing to make it suitable for the end users. The processing operation includes slabbing, sizing, polishing, etc. Diamond drilling is also commonly used for the exploration of different mineral deposits throughout the world. In this paper an attempt has been made to enhance the performance of diamond drilling on marble rocks by adding polyethylene-oxide (PEO) in the flushing water. The effect of PEO added with the drilling water was studied by varying different machine parameters and flushing media concentration in the laboratory. The responses were rate of penetration and torque at bit-rock interface. Different physico-mechanical properties of marble were also determined. It was found that flushing water added with PEO can substantially enhance the penetration rates and reduce the torque developed at the bit-rock interface as compared to plain flushing water.

  5. Micro- and macroscopic study on the porosity of marble as a function of temperature and impregnation

    Science.gov (United States)

    Malaga-Starzec, K.; Akesson, U.; Lindqvist, J. E.; Schouenborg, B.

    2003-04-01

    The thermal weathering of marble is demonstrated by the progressive granular decohesion that leads to an increased porosity and subsequently to loss of strength. In order to determine how temperature cycling initiates changes in the porosity of fresh and impregnated stones: two chemically and petrographically very different marble types were tested for water absorption and ultrasonic velocity propagation and analysed by fluorescence microscopy and nitrogen adsorption. The influence of the impregnation materials: GypStop P17 and P22, both silica sols with different particle size, on changes of the porosity was also evaluated. A separate long-term study of thermal expansion was additionally performed on fresh unimpregnated samples. The results indicated that inter-granular decohesion was more pronounced for the calictic marble than the dolomitic marble. The impregnation materials had a mitigating effect on the granular decohesion. Use of fluorescence microscopy, among the other methods, appears to give inexpensive and reliable information about internal structure of the marbles. A better understanding of the effect that temperature has on the porosity of marble could be used as a guide for election of suitable stone material for exterior use as well as an indication for appropriate conditioning of the samples before physical properties testing.

  6. A Multi-analytical Approach for the Characterization of Marbles from Lesser Himalayas (Northwest Pakistan)

    Science.gov (United States)

    Fahad, M.; Iqbal, Y.; Riaz, M.; Ubic, R.; Redfern, S. A. T.

    2015-12-01

    The KP province of Pakistan hosts widespread deposits of thermo-metamorphic marbles that were extensively used as a building and ornamental stones since the time of earliest flourishing civilization in this region known as Indus Valley Civilization (2500 BC). The macroscopic characteristics of 22 marble varieties collected from three different areas of Lesser Himalayas (Northwest Pakistan), its chemical, mineralogical, petrographic features, temperature conditions of metamorphic re-crystallization, and the main physical properties are presented in order to provide a solid basis for possible studies on the provenance and distribution of building stones from this region. The results provide a set of diagnostic parameters that allow discriminating the investigated marbles and quarries. Studied marbles overlap in major phase assemblage, but the accessory mineral content, chemistry, the maximum grain size (MGS) and other petrographic characteristics are particularly useful in the distinction between them. On the basis of macroscopic features, the studied marbles can be classifies into four groups: (i) white (ii) grey-to-brown veined, (iii) brown-reddish to yellowish and (iv) dark-grey to blackish veined marbles. The results show that the investigated marbles are highly heterogeneous in both their geochemical parameters and minero-petrographic features. Microscopically, the white, grey-to-brown and dark-grey to blackish marbles display homeoblastic/granoblastic texture, and the brown-reddish to yellowish marbles display a heteroblastic texture with traces of slightly deformed polysynthetic twining planes. Minero-petrography, XRD, SEM and EPMA revealed that the investigated marbles chiefly consist of calcite along with dolomite, quartz, muscovite, pyrite, K-feldspar, Mg, Ti and Fe-oxides as subordinates. The magnesium content of calcite coexisting with dolomite was estimated by both XRD and EPMA/EDS, indicating the metamorphic temperature of re-crystallization from 414

  7. Places of Faith: A Reflection on Landscape of Manila Cathedral Plaza de Roma and Istiqlal Mosque Sacred Grounds of Jakarta

    Science.gov (United States)

    Pujalte, MM; Navarra, N.

    2017-10-01

    Crossing boundaries of faith from Manila to Jakarta, this study is to classify the open spaces in their sacred grounds according to its characteristics, elements, use of space and hierarchy of importance in landscape design approach. The reflection of their religious landscape in preserving the traditional, and exploring the non-traditional aspect of their landscape design in global setting is carried out thru a spatial analysis for Plaza de Roma of Manila Cathedral and the sacred grounds of Istiqlal Mosque. The design framework would tackle: concepts, planning approach, functional symbolic values, and aesthetics used. The data and information are all examined based on observation, historical background, analyses, and literature content in determining spatial functions. Finally, when results are completed, this will give a better understanding on the importance of open areas in Manila and Jakarta’s sacred spaces; paving way for a better sense of comfort in spiritual contemplation. This will also help reveal the commonalities in spiritual practices between Islam and Christianity, and the role of landscape in their religion and faith.

  8. Proximal interphalangeal joint ankylosis in an early medieval horse from Wrocław Cathedral Island, Poland.

    Science.gov (United States)

    Janeczek, Maciej; Chrószcz, Aleksander; Onar, Vedat; Henklewski, Radomir; Skalec, Aleksandra

    2017-06-01

    Animal remains that are unearthed during archaeological excavations often provide useful information about socio-cultural context, including human habits, beliefs, and ancestral relationships. In this report, we present pathologically altered equine first and second phalanges from an 11th century specimen that was excavated at Wrocław Cathedral Island, Poland. The results of gross examination, radiography, and computed tomography, indicate osteoarthritis of the proximal interphalangeal joint, with partial ankylosis. Based on comparison with living modern horses undergoing lameness examination, as well as with recent literature, we conclude that the horse likely was lame for at least several months prior to death. The ability of this horse to work probably was reduced, but the degree of compromise during life cannot be stated precisely. Present day medical knowledge indicates that there was little likelihood of successful treatment for this condition during the middle ages. However, modern horses with similar pathology can function reasonably well with appropriate treatment and management, particularly following joint ankylosis. Thus, we approach the cultural question of why such an individual would have been maintained with limitations, for a probably-significant period of time. Copyright © 2017 Elsevier Inc. All rights reserved.

  9. Analysis of the size of sandstone particles from the Cathedrals of Salamanca. Independence between granulometry and deterioration

    Directory of Open Access Journals (Sweden)

    Martín Patino, M. T.

    1994-03-01

    Full Text Available 11 sandstone samples from the cathedrals of Salamanca were analysed granulometrically. The study was to establish whether there is a direct connection between the particle size of such stone and the surface deterioration of some of the ashlars in the facades. This was carried out with the help of diffraction spectrometry by laser beams. The results show that there is no connection between the nature of the stone texture and their degree of surface deterioration.

    Se analizan granulométricamente 11 muestras de arenisca de las Catedrales de Salamanca. El objetivo del estudio es establecer si existe relación directa entre el tamaño de las partículas de tales piedras y el deterioro superficial de alguno de los sillares de las fachadas. Esto se lleva a cabo con la ayuda de la espectrometría de difracción por rayos láser. Los resultados muestran que no hay conexión entre la finura textural de las piedras estudiadas y el grado de deterioro superficial que éstas presentan.

  10. The cathedral and the bazaar of e-repository development: encouraging community engagement with moving pictures and sound

    Directory of Open Access Journals (Sweden)

    Denis Wong

    2008-12-01

    Full Text Available This paper offers an insight into the development, use and governance of e-repositories for learning and teaching, illustrated by Eric Raymond's bazaar and cathedral analogies and by a comparison of collection strategies that focus on content coverage or on the needs of users. It addresses in particular the processes that encourage and achieve community engagement. This insight is illustrated by one particular e-repository, the Education Media On-Line (EMOL service. This paper draws analogies between the bazaar approach for open source software development and its possibilities for developing e-repositories for learning and teaching. It suggests in particular that the development, use and evaluation of online moving pictures and sound objects for learning and teaching can benefit greatly from the community engagement lessons provided by the development, use and evaluation of open source software. Such lessons can be underpinned by experience in the area of learning resource collections, where repositories have been classified as ‘collections-based' or ‘user-based'. Lessons from the open source movement may inform the development of e-repositories such as EMOL in the future.

  11. The glasses of the transept’s rosette of the cathedral of Tarragona: characterisation, classification and decay

    Directory of Open Access Journals (Sweden)

    García-Vallès, M.

    2002-04-01

    Full Text Available The glasses of the rosette forming the main window of the transept of the Gothic Cathedral of Tarragona have been characterised by means of SEM/EDS, XRD, FTIR and electronic microprobe. The multivariate statistical treatment of these data allow to establish a classification of the samples forming groups having an historical significance and reflecting ancient restorations. Furthermore, the decay patterns and mechanisms have been determined and the weathering by-products characterised. It has been demonstrated a clear influence of the bioactivity in the decay of these glasses, which activity is partially controlled by the chemical composition of the glasses.

    Se han caracterizado numerosas muestras de los vidrios que forman el rosetón del transepto de la catedral de Tarragona mediante SEM/EDS, XRD, FTIR y microsonda electrónica. La aplicación de análisis estadístico multivariante permite establecer una clasificación de las muestras que refleja anteriores intervenciones de restauración. Además, se han estudiado los mecanismos y procesos de degradación, y se han determinado los productos de alteración. Ha quedado demostrada una clara ifluencia biológica en la alteración de estos vidrios, cuya actividad es parcialmente controlada por su composición química.

  12. Migration studies of fission product nuclides in rocks. Pt.5: Diffusion and permeability of nuclide 125I in marble

    International Nuclear Information System (INIS)

    Wen Ruiyuan; Gao Hongcheng; Wang Xiangyun

    1996-01-01

    The migration behaviour of nuclide 125 I, as a simulation of the long lived fission product 129 I, in marble is studied in self-designed cells. A series of the most important parameters of diffusion and permeability (e.g., intrinsic diffusion coefficient, dispersion coefficient and interstitial flow velocity, etc.) are determined. Based on the differential equation of the nuclide migration, the distribution function and numerical solution of 125 I in marble are presented. The results show that the migration velocity of 125 I in marble is fast, indicating that it is not suitable to dispose nuclear waste in marble

  13. Expansion of the marbled crayfish in Slovakia: beginning of an invasion in the Danube catchment?

    Directory of Open Access Journals (Sweden)

    Boris Lipták

    2016-01-01

    Full Text Available The marbled crayfish, Procambarus fallax f. virginalis, is a taxon widely available in the aquarium pet trade, which has been introduced to open waters in several European countries and in Madagascar. Recent studies confirmed this parthenogenetically reproducing crayfish as a high-risk invasive species, and vector of the crayfish plague pathogen, Aphanomyces astaci. It has been first discovered in Slovakia in 2010, but the status of the local population was not studied since then. Due to enlarged sampling area around the first report and one locality, where we presupposed the crayfish occurrence, we identified new marbled crayfish populations. Here, we report presence of three newly established marbled crayfish populations in Slovakia. Two populations are located critically close to the Váh River, a major tributary of the Danube River; one of them being directly connected to the Váh River via a side channel during occasional floods. The third established marbled crayfish population was found at the mouth of a thermal stream flowing into the Nitra River, a tributary of the Váh River. In this stream, crayfish coexist with other exotic fish and gastropod species of aquarium origin. We presume that the reported localities may serve as a source for further expansion of the marbled crayfish in the mid-part of the Danube catchment. Floods, active dispersal (including overland, passive dispersal by zoochory or anthropogenic translocations are among the major drivers facilitating the marbled crayfish colonization. We have not detected the crayfish plague pathogen in any of the studied populations. However, if spreading further, the marbled crayfish will encounter established populations of crayfish plague carriers in the Danube River, in which case they may acquire the pathogen by horizontal transmission and contribute to spread of this disease to indigenous European crayfish species.

  14. Characterization methodology for re-using marble slurry in industrial applications

    Science.gov (United States)

    Marras, Graziella; Careddu, Nicola; Peretti, Roberto; Bortolussi, Augusto

    2017-04-01

    In the effort towards waste minimization and circular economy, natural stone waste is one of the foremost parameter to turn scientific community attention. At this time, calcium carbonate has a great importance in industrial fields and currently there is the necessity of appreciate the potential value of marble waste and convert it into marketable products. A large amount of residues is produced in ornamental stone sector with different dimension and particle size. The research focused on marble slurry, recovered at the end of the treatment plant in the filter-press section. The aim of this paper is to propose a defined way to characterize marble slurry, primarily composed of micronized particles, in order to obtain useful data to make a comparison with market specifications. In particular the proposed characterization methodology follows the indicated steps: Leaching test (TCLP) - Grain size distribution and bulk density - Mineralogical analyses - X-Ray diffraction - Chemical analysis - Loss on ignition - SEM determination - Colorimetric and bright analysis. Marble slurry samples, collected by different dimension stone treatment plants in Orosei marble district (Sardinia - Italy), were analyzed by physical, mineralogical and chemical determinations and the obtained data were evaluated for compatibility with the CaCO3 specifications required by a definite industrial sector, seeing as how CaCO3 product specifications vary depending on the utilization. The importance of this investigation is to characterize completely the "waste" that must apply for further uses and to identify the feasibility to substitute marketable micronized CaCO3 with marble slurry. Further goal is to enhance the environmental advantages of re-using stone waste by reducing marble waste landfills and by applying raw material substitution, in accordance with regulatory requirements, thus pursuing the objective to convert natural stone waste into by-product with a renewed environmental and economic

  15. Electromagnetic and ultrasonic investigations on a roman marble slab

    Science.gov (United States)

    Capizzi, Patrizia; Cosentino, Pietro L.

    2010-05-01

    The archaeological Museum of Rome (Museo delle Terme di Diocleziano) asked our group about the physical consistency of a marble slab (II - III century AD) that has recently fallen down during the transportation for an exhibition. In fact, due to insurance conflict, it was necessary to control the new fractures due to the recent accident and distinguish them from the ancient ones. The sculptured slab (today's size is 1280 x 70 x 9 cm), cut at the ends for a re-use as an inscription in the rear face, was restored (assemblage of different broken parts and cleaning) in contemporary times. We used different methodologies to investigate the slab: namely a pacometer (Protovale Elcometer) to individuate internal coupling pins, GPR (2000 MHz) and Ultrasonic (55 kHz) tomographic high-density surveys to investigate the internal extension of all the visible fractures and to search for the unknown internal ones. For every methodology used the quality of the acquired data was relatively high. They have been processed and compared to give a set of information useful for the bureaucratic problems of the Museum. Later on, the data have been processed in depth, for studying how to improve the data processing and for extracting all the information contained in the whole set of experimental data. Finally, the results of such a study in depth are exposed in detail.

  16. Influence of High Temperature Treatment on Mechanical Behavior of a Coarse-grained Marble

    Science.gov (United States)

    Rong, G.; Peng, J.; Jiang, M.

    2017-12-01

    High temperature has a significant influence on the physical and mechanical behavior of rocks. With increasing geotechnical engineering structures concerning with high temperature problems such as boreholes for oil or gas production, underground caverns for storage of radioactive waste, and deep wells for injection of carbon dioxides, etc., it is important to study the influence of temperature on the physical and mechanical properties of rocks. This paper experimentally investigates the triaxial compressive properties of a coarse-grained marble after exposure to different high temperatures. The rock specimens were first heated to a predetermined temperature (200, 400, and 600 oC) and then cooled down to room temperature. Triaxial compression tests on these heat-treated specimens subjected to different confining pressures (i.e., 0, 5, 10, 15, 20, 25, 30, 35, and 40 MPa) were then conducted. Triaxial compression tests on rock specimens with no heat treatment were also conducted for comparison. The results show that the high temperature treatment has a significant influence on the microstructure, porosity, P-wave velocity, stress-strain relation, strength and deformation parameters, and failure mode of the tested rock. As the treatment temperature gradually increases, the porosity slightly increases and the P-wave velocity dramatically decreases. Microscopic observation on thin sections reveals that many micro-cracks will be generated inside the rock specimen after high temperature treatment. The rock strength and Young's modulus show a decreasing trend with increase of the treatment temperature. The ductility of the rock is generally enhanced as the treatment temperature increases. In general, the high temperature treatment weakens the performance of the tested rock. Finally, a degradation parameter is defined and a strength degradation model is proposed to characterize the strength behavior of heat-treated rocks. The results in this study provide useful data for

  17. DEGRADATION AND CONSERVATION OF MARBLE IN THE GREEK ROMAN HADRIANIC BATHS IN LEPTIS MAGNA, LIBYA

    Directory of Open Access Journals (Sweden)

    Nabil.A. ABD EL-TAWAB

    2012-09-01

    Full Text Available The Hadrianic Baths is one of the most important archaeological sites in Leptis Magna- Libya. It was built at the command of Emperor Hadrian in the early 2nd century CE; they represent some of the most lavish structures of Leptis Magna. It is unique in design and building technique. It was built of limestone, marble and brick. This paper mainly describes the deterioration of marble. The marble in the monuments can be classified into several types, based on its color, texture, chemical composition and the constituent mineral. The Hadrianic Baths is subjected to severe degradation, due to the climate, which is typically marine. This site suffered from different weathering forms, for example, disintegration of grains, pitting, chipping, frequent flaking, multiple-flaking, fissures and biodeterioration. These weathering forms were produced by many deterioration factors, such as moisture, salt weathering, biological and micro-biological factors, changes in temperature and wind erosion. The aim of this study is to characterize the building materials at the Hadrianic Baths, especially marble, and to evaluate the role of groundwater and sea weathering on the strength of the marble exposed to the coastline of the Mediterranean. Many samples were collected from limestone, marble, mortar, plaster and salts, for analysis and investigation. Several scientific techniques were used in the study of the morphology and texture. Those methods include microscopy, such as scanning electron microscopy (SEM, polarized light microscopy (PLM and stereo microscopy. A qualitative identification of organic and inorganic chemical species was performed by using techniques such as energy-dispersive spectroscopy (EDS, X-ray diffraction (XRD and microbial investigation were also done. Our results indicated that the deterioration of marble was caused by the aggressive action of environmental agents. SEM observations indicated the occurrence of microcracks and particle aggregates

  18. HISTORY AND TOURIST VALORIZATION OF THE RUSCHIȚA MARBLE QUARRY (CARAȘ-SEVERIN COUNTY, ROMANIA

    Directory of Open Access Journals (Sweden)

    D.-R. TODOR

    2015-10-01

    Full Text Available History and Tourist Valorization of the Ruschița Marble Quarry (Caraș-Severin County, Romania. With an area of over 40 ha, the marble quarry located north of Ruschița village, Rusca Montană commune, Caraș-Severin County is the largest exploitation perimeter of this kind on the territory of Romania and one of the largest in Europe. Many works were written about the Ruschița marble quarry across time, especially regarding geology, but very little was talked about its tourism potential. If generally, the vast majority of the extractive areas are not at all attractive from the tourist point of view, having rather a repulsive appearance, the marble quarry from Ruschița proves the contrary, both by the greatness and sizes of exploitation and by the surrounding area, constituted of a very diversified mountain relief and an abundant forest vegetation. That is why, we consider useful an attraction and integration in the tourist circuit of this spectacular anthropogenic monument, unique in Romania, comparable to the Carrara (Italy marble quarries. This paper makes a pleading in this respect.

  19. Radiation dose estimation and mass attenuation coefficients of marble used in Turkey

    International Nuclear Information System (INIS)

    Cevik, U.; Damla, N.; Kobya, A.I.; Celik, A.; Kara, A.

    2010-01-01

    In this study the natural radioactivity in marble samples used in Turkey was measured by means of gamma spectrometry. The results showed that the specific activities of 226 Ra, 232 Th and 40 K ranged from 10 to 92 Bq kg -1 , from 4 to 122 Bq kg -1 and from 28 to 676 Bq kg -1 , respectively. The radiological hazards in marble samples due to the natural radioactivity were inferred from calculations of radium equivalent activities (Ra eq ), indoor absorbed dose rate in air values, the annual effective dose and gamma and alpha indexes. These radiological parameters were evaluated and compared with the internationally recommended values. The measurements showed that marble samples used in Turkey have low level of natural radioactivity; therefore, the use of these types of marble in dwellings is safe for inhabitants. Mass attenuation coefficients (μ/ρ) were obtained both experimentally and theoretically for different marble samples produced in Turkey by using gamma-ray transmission method. Experimental values showed a good agreement with the theoretical values.

  20. Isotopic studies of marbles in the Sanbagawa metamorphic terrain, central Shikoku, Japan

    International Nuclear Information System (INIS)

    Wada, Hideki; Enami, Masaki; Yanagi, Takeru.

    1984-01-01

    Carbon, oxygen and strontium isotopic studies were carried out on marbles occurring in crystalline schists and epidote amphibolites of the Sanbagawa metamorphic terrain, central Shikoku, Japan, in order to estimate metamorphic temperatures and to elucidate their origin. Carbon isotopic fractionation between calcite and graphite shows the metamorphic temperature of 460 deg C at the transitional part between the garnet and albite-biotite zones. Marbles are isotopically classified into two groups. (1) some marbles in epidote amphibolite masses show characteristically negative delta 13 C values and low 87 Sr/ 86 Sr ratios. These marbles are interpreted as have been derived from magmatic or deep-seated carbonates. (2) marbles collected from the crystalline schists and from the marginal part of epidote amphibolite masses, have high 87 Sr/ 86 Sr ratios and delta 13 C values similar to those of typical sedimentary carbonates. They were probably derived from sedimentary carbonates and/or carbonates re-equilibrated with metamorphic fluid segregated from crystalline schists during the Sanbagawa metamorphism. (author)

  1. Neutron activation analysis applied to assemblage problems in fragmented marble sculptures

    International Nuclear Information System (INIS)

    Sangermano, L.R.

    1976-01-01

    One of the major problems encountered in assemblage work on fragmented marble sculptures is determining if two pieces were originally joined together when there are no remaining material links between the two. This work deals with solving this problem by using Neutron Activation Analysis techniques. Samples from a block of sculpture grade Georgian marble were analyzed. The following trace elements were identified on the basis of their gamma ray energies and their half-life studies: 165 Dy, 155 Sm, 152 Eu, 56 Mn, 24 Na, 85 Sr, 51 Ti, 80 Br, 27 Mg, 52 V, 42 K, 28 Al, 46 Sc, 141 Ce, 198 Au, 140 La, 122 Sb, and 124 Sb. The next step in this work was to determine whether the trace elements, which were originally trapped in the marble during metamorphosis, formed concentration patterns which extended over short distances in the stone. A block of sculpture grade Colorado marble was cut into a number of slices and these slices were analyzed for the trace elements they contained. The concentration patterns formed by these impurities were followed through successive layers of the stone. The ability to follow these ''fingerprint'' concentration patterns over short distances in marble was further tested by analyzing two adjoining segments of a Roman wall relief at the J. Paul Getty Museum in Malibu, California. The trace impurity ''fingerprints'' were successfully matched between the wrist and hand segments of this piece

  2. Finite-element modelling of thermal micracking in fresh and consolidated marbles

    Science.gov (United States)

    Weiss, T.; Fuller, E.; Siegesmund, S.

    2003-04-01

    The initial stage of marble weathering is supposed to be controlled by thermal microcracking. Due to the anisotropy of the thermal expansion coefficients of calcite, the main rock forming mineral in marble, stresses are caused which lead to thermally-induced microcracking, especially along the grain boundaries. The so-called "granular disintegration" is a frequent weathering phenomenon observed for marbles. The controlling parameters are the grain size, grain shape and grain orientation. We use a finite-element approach to constrain magnitude and directional dependence of thermal degradation. Therefore, different assumptions are validated including the fracture toughness of the grain boundaries, the effects of the grain-to-grain orientation and bulk lattice preferred orientation (here referred to as texture). The resulting thermal microcracking and bulk rock thermal expansion anisotropy are validated. It is evident that thermal degradation depends on the texture. Strongly textured marbles exhibit a clear directional dependence of thermal degradation and a smaller bulk thermal degradation than randomly oriented ones. The effect of different stone consolidants in the pore space of degraded marble is simulated and its influence on mechanical properties such as tensile strength are evaluated.

  3. Analysis of Physical and Mechanical Properties of Marble Particles Floor-Tile Composite

    International Nuclear Information System (INIS)

    Parikin; Arslan, A.; Ismoyo, A.H.; Jodi, H.E.; Nurhasanah, S.

    2002-01-01

    Two criteria that very predictable to quality products of marble particles composite floor-tile are physical and mechanical properties. Simple manufacturing was conducted from powdering refuges of marble to molding and drying the specimens at ambient atmosphere. The characterization, to observe; density, crystal structure, microstructure, hardness and compressive/bending strength of the material, was performed in Serpong and IPB-Bogor. The analysis shows that polymeric crystallization was occurred by HEXA and the density and the hardness generally rise up with the improvements in mesh and composition of marble particles. But it is not always followed by the real improvements of compressive and bending strength, which related to the material stiffness. The curves figured that these two strengths give the maximum values at 60% composition of marble particles. It can be concluded that density and hardness are dependent on mesh and composition, whereas the stiffness (modulus) is only correlation with composition of particulate. The theoretical modulus of marble particles composite floor-tile has been evaluated at about 56.19 GPa. (author)

  4. The acute and long-term neurotoxic effects of MDMA on marble burying behaviour in mice.

    Science.gov (United States)

    Saadat, Kathryn S; Elliott, J Martin; Colado, M Isabel; Green, A Richard

    2006-03-01

    When mice are exposed to harmless objects such as marbles in their cage they bury them, a behaviour sometimes known as defensive burying. We investigated the effect of an acute dose of MDMA (èecstasy') and other psychoactive drugs on marble burying and also examined the effect of a prior neurotoxic dose of MDMA or p-chloroamphetamine (PCA) on burying. Acute administration of MDMA produced dose-dependent inhibition of marble burying (EC50: 7.6 micro mol/kg). Other drugs that enhance monoamine function also produced dose-dependent inhibition: methamphetamine PCA paroxetine MDMA GBR 12909 methylphenidate. None of these drugs altered locomotor activity at a dose that inhibited burying. A prior neurotoxic dose of MDMA, which decreased striatal dopamine content by 60%, but left striatal 5-HT content unaltered, did not alter spontaneous marble burying 18 or 40 days later. However, a neurotoxic dose of PCA which decreased striatal dopamine by 60% and striatal 5-HT by 70% attenuated marble burying 28 days later. Overall, these data suggest that MDMA, primarily by acutely increasing 5-HT function, acts like several anxiolytic drugs in this behavioural model. Long-term loss of cerebral 5-HT content also produced a similar effect. Since this change was observed only after 28 days, it is probably due to an adaptive response in the brain.

  5. Characteristics and Health Benefit of Highly Marbled Wagyu and Hanwoo Beef

    Science.gov (United States)

    Gotoh, Takafumi

    2016-01-01

    This review addresses the characteristics and health benefit of highly marbled Wagyu and Hanwoo beef. Marbling of Wagyu and Hanwoo beef has been increased in Japan and Korea to meet domestic consumer preferences. Wagyu and Hanwoo cattle have high potential of accumulating intramuscular fat (IMF) and producing highly marbled beef. The IMF content varies depending on the feeding of time, finishing diet, and breed type. IMF increases when feeding time is increased. The rate of IMF increase in grain-fed cattle is faster than that in pasture-fed cattle. Fatty acid composition are also different depending on breeds. Highly marbled Wagyu and Hanwoo beef have higher proportions of monounsaturated fatty acid (MUFA) due to higher concentrations of oleic acid. MUFAs have little effect on total cholesterol. They are heart-healthy dietary fat because they can lower low-density lipoprotein (LDL)-cholesterol while increasing high-density lipoprotein (HDL)-cholesterol. Clinical trials have indicated that highly marbled beef does not increase LDL-cholesterol. This review also emphasizes that high oleic acid beef such as Wagyu and Hanwoo beef might be able to reduce risk factors for cardiovascular disease. PMID:28115881

  6. Putative apolipoprotein A-I, natural killer cell enhancement factor and lysozyme g are involved in the early immune response of brown-marbled grouper, Epinephelus fuscoguttatus, Forskal, to Vibrio alginolyticus.

    Science.gov (United States)

    Low, C-F; Shamsudin, M N; Chee, H-Y; Aliyu-Paiko, M; Idrus, E S

    2014-08-01

    The gram-negative bacterium, Vibrio alginolyticus, has frequently been identified as the pathogen responsible for the infectious disease called vibriosis. This disease is one of the major challenges facing brown-marbled grouper aquaculture, causing fish farmers globally to suffer substantial economic losses. The objective of this study was to investigate the proteins involved in the immune response of brown-marbled grouper fingerlings during their initial encounter with pathogenic organisms. To achieve this objective, a challenge experiment was performed, in which healthy brown-marbled grouper fingerlings were divided into two groups. Fish in the treated group were subjected to intraperitoneal injection with an infectious dose of V. alginolyticus suspended in phosphate-buffered saline (PBS), and those in the control group were injected with an equal volume of PBS. Blood samples were collected from a replicate number of fish from both groups at 4 h post-challenge and analysed for immune response-related serum proteins via two-dimensional gel electrophoresis. The results showed that 14 protein spots were altered between the treated and control groups; these protein spots were further analysed to determine the identity of each protein via MALDI-TOF/TOF. Among the altered proteins, three were clearly overexpressed in the treated group compared with the control; these were identified as putative apolipoprotein A-I, natural killer cell enhancement factor and lysozyme g. Based on these results, these three highly expressed proteins participate in immune response-related reactions during the initial exposure (4 h) of brown-marbled grouper fingerling to V. alginolyticus infection. © 2013 John Wiley & Sons Ltd.

  7. THz imaging of majolica tiles and biological attached marble fragments

    Science.gov (United States)

    Catapano, Ilaria; Soldovieri, Francesco

    2016-04-01

    Devices exploiting waves in the frequency range from 0.1 THz to 10 THz (corresponding to a free-space wavelength ranging from 30 μm to 3 mm) deserve attention as diagnostic technologies for cultural heritage. THz waves are, indeed, non-ionizing radiations capable of penetrating into non-metallic materials, which are opaque to both visible and infrared waves, without implying long term risks to the molecular stability of the exposed objects and humans. Moreover, THz surveys involve low poewr probing waves, are performed without contact with the object and, thanks to the recent developments, which have allowed the commercialization of compact, flexible and portable systems, maybe performed in loco (i.e. in the place where the artworks are usually located). On the other hand, THz devices can be considered as the youngest among the sensing and imaging electromagnetic techniques and their actual potentialities in terms of characterization of artworks is an ongoing research activity. As a contribution within this context, we have performed time of flight THz imaging [1,2] on ceramic and marble objects. In particular, we surveyed majolica tiles produced by Neapolitan ceramists in the 18th and 19th centuries with the aim to gather information on their structure, constructive technique and conservation state. Moreover, we investigated a Marmo di Candoglia fragment in order to characterize the biological attach affecting it. All the surveys were carried out by using the Fiber-Coupled Terahertz Time Domain System (FICO) developed by Z-Omega and available at the Institute of Electromagnetic Sensing of the Environment (IREA). This system is equipped with fiber optic coupled transmitting and receiving probes and with an automatic positioning system enabling to scan a 150 mm x 150 mm area under a reflection measurement configuration. Based on the obtained results we can state that the use of THz waves allows: - the reconstruction of the object topography; - the geometrical

  8. Marble Canyon 10 x 20 NTMS area Arizona: data report

    International Nuclear Information System (INIS)

    Heffner, J.D.

    1980-07-01

    Results of ground water and stream/surface sediment reconnaissance (HSSR) in the National Topographic Map Series (NTMS) Marble Canyon 1 0 x 2 0 quadrangle are presented. The target sampling density for all media collected was one site per 12 square kilometers. This resulted in 884 sediment samples being collected; however, dry conditions and sparse population resulted in the collection of only 2 ground water samples. Grand Canyon National Park, Glen Canyon National Recreation Area, and much Indian tribal land in the southern half of the quadrangle were not sampled. Neutron activation analysis (NAA) results are given for uranium and 16 other elements in sediments, and for uranium and 9 other elements in ground water. Mass spectrometry results are given for helium in ground water. Field measurements for sediment samples are presented in tables and maps. Statistical summaries of data and a brief description of results are given. A generalized geologic map and a summary of the geology of the area are included. Data from ground water include: water chemistry measurements (pH, conductivity, and alkalinity); physical measurements (water temperature, and scintillometer readings); and elemental analyses (U, Al, Br, Cl, Dy, F, He, Mg, Mn, Na, and V). Data from sediment sites include: water chemistry measurements (where available) for pH, conductivity, and alkalinity; and elemental analyses(U, Th, Hf, Al, Ce, Dy, Eu, Fe, La, Lu, Mn, Sc, Sm, Na, Ti, V, and Yb). Sample site descriptors (stream characteristics, vegetation, etc.) are also tabulated. Histograms, cumulative frequency, and areal distribution plots for most elements; Log U/Th, Log U/Hf, and Log U/(Th + Hf) ratios; and scintillometer readings are included

  9. Laser-Scanner Survey of Structural Disorders: AN Instrument to Inspect the History of Parma Cathedral's Central Nave

    Science.gov (United States)

    Bruno, N.; Coïsson, E.; Cotti, M.

    2017-05-01

    This paper presents the use of laser scanner derived data for the study of the structural disorders in the central nave of the Parma Cathedral. An accurate three-dimensional model of the entire nave was realized to investigate deformations, in order to reconstruct the original conformation and the subsequent evolutions, also in comparison with previous surveys. Specifically, for the analysis presented in the paper, seven scans were performed, one for each bay: the results allowed to compare the deformations on the seven vaults, on the transverse and diagonal arches, giving first hints on the possible differences in the behaviour between the different elements. The measures on the levels of floor and pillars bases were analysed in a historical monitoring approach, in order to retrace the evolution of the differential settlements in time, since the construction of the building. Moreover, a structural analysis has been carried out on one transverse arch with distinct element analysis, with two different approaches. In one case, the structure was inserted exactly as surveyed, and then subjected to the actions. In the second case, the original geometry, before the deformation, was retraced through a parametric approach and the structural analysis basically started at the beginning of the building's life, thus trying to model not only the present structural situation, but also the path which led to the current deformation. The results were particularly meaningful as they showed that in the first case, disregarding the footsteps of history, the stress pattern inside the masonry was very different from the one obtained in the second case, which is more likely to represent the present conditions.

  10. The central tower of the cathedral of Schleswig - New investigations to understand the alcali-silica reaction of historical mortars

    Science.gov (United States)

    Wedekind, Wanja; Protz, Andreas

    2016-04-01

    The damaging alcali-silica reaction leads to crack-formation and structural destruction at noumerous, constructed with cement mortar, buildings worldwide. The ASR-reaction causes the expansion of altered aggregates by the formation of a swelling gel. This gel consists of calcium silicate hydrate (C-S-H) that increases in volume with water, which exerts an expansive pressure inside the material. The cathedral of Schleswig is one of the oldest in northern Germany. The first church was built in 985-965. The Romanesque building part was erected around 1180 and the Gothic nave at the end of the 13th century. The central tower was constructed between 1888 and 1894 with brick and cement mortar. With 112 meters, the tower is the second-largest church spire of the country of Schleswig-Holstein in northern Germany. Due to the formation of cracks and damages from 1953 to 1956 first restoration works took place. Further developments of cracks are making restoration necessary again today. For developing a suitable conservation strategy, different investigations were done. The investigation included the determination of the pore space properties, the hygric and thermal dilatation and mercury porosimetry measurements. Furthermore, the application of cathodoluminescence microscopy may give information about the alteration process and microstructures present and reveal the differences between unaltered and altered mortars. An obvious relation between the porosity and the swelling intensity could be detected. Furthermore it becomes apparent, that a clear zonation of the mortar took place. The mortar near the surface is denser with a lower porosity and has a significantly lower swelling or dilatation.

  11. Characterization of the material produced using marble waste and reagents aiminig production of rock wool

    International Nuclear Information System (INIS)

    Rodrigues, Girley Ferreira; Espinosa, Denise Crocce Romano; Tenorio, Jorge Alberto Soares; Alves, Joner Oliveira

    2010-01-01

    The aim of this work was to characterize materials produced from the mixture of marble waste and chemical reagents. The materials were homogenized, melted and cooled in order to obtain materials with similar characteristics of rock wools. The batch was poured in a water-filled recipient and also in a Herty viscometer at three temperatures. Samples of produced materials were characterized by X-ray diffraction, scanning electron microscopy and differential thermal analysis. Results of this study indicate that it is possible the incorporation of marble waste in the production process of rock wool, replacing approximately 15% of the raw material used to fabricate this material. This process represents a technological breakthrough since it allows the reuse of marble waste, and also represents a possible decrease in rock wool production cost, which is a material with a growing market as thermo acoustic insulator. (author)

  12. Effect of Static-Dynamic Coupling Loading on Fracture Toughness and Failure Characteristics in Marble

    Directory of Open Access Journals (Sweden)

    Z. Q. Yin

    2014-03-01

    Full Text Available Fracture experiments in a notched semi-circular bend configuration were conducted to test the dynamic fracture toughness of a marble under static-dynamic coupling load using a modified split Hopkinson pressure bar. The fracture process of the specimen was monitored using a high speed (HS camera. Based on digital image correlation (DIC and strain gauges, the full-field strain fields and time-to-fracture of the marble were measured under static-dynamic coupling load. Experimental results show that dynamic fracture toughness was well determined, and the HS-DIC technique provides reliable full-field strain fields in the specimens under static-dynamic coupling loads. The failure characteristics of the marble under external impact were affected obviously by pre-compression stress. Increase of axial pre-compression stress was helpful to improve the crack propagation velocity, and dynamic crack initiation toughness was decreased.

  13. An investigation of multi-rate sound decay under strongly non-diffuse conditions: The crypt of the Cathedral of Cadiz

    Science.gov (United States)

    Martellotta, Francesco; Álvarez-Morales, Lidia; Girón, Sara; Zamarreño, Teófilo

    2018-05-01

    Multi-rate sound decays are often found and studied in complex systems of coupled volumes where diffuse field conditions generally apply, although the openings connecting different sub-spaces are by themselves potential causes of non-diffuse behaviour. However, in presence of spaces in which curved surfaces clearly prevent diffuse field behaviour from being established, things become more complex and require more sophisticated tools (or, better, combinations of them) to be fully understood. As an example of such complexity, the crypt of the Cathedral of Cadiz is a relatively small space characterised by a central vaulted rotunda, with five radial galleries with flat and low ceiling. In addition, the crypt is connected to the main cathedral volume by means of several small openings. Acoustic measurements carried out in the crypt pointed out the existence of at least two decay processes combined, in some points, with flutter echoes. Application of conventional methods of analysis pointed out the existence of significant differences between early decay time and reverberation time, but was inconclusive in explaining the origin of the observed phenomena. The use of more robust Bayesian analysis permitted the conclusion that the late decay appearing in the crypt had a different rate than that observed in the cathedral, thus excluding the explanation based on acoustic coupling of different volumes. Finally, processing impulse responses collected by means of a B-format microphone to obtain directional intensity maps demonstrated that the late decay was originated from the rotunda where a repetitive reflection pattern appeared between the floor and the dome causing both flutter echoes and a longer reverberation time.

  14. 78 FR 52984 - Stone Age Interiors, Inc.; d/b/a Colorado Springs Marble and Granite Including On-Site Leased...

    Science.gov (United States)

    2013-08-27

    ....; d/b/a Colorado Springs Marble and Granite Including On-Site Leased Workers From Express Employment... Colorado Springs Marble and Granite, Colorado Springs, Colorado (hereafter collectively referred to as..., Inc., d/b/a Colorado Springs Marble and Granite, including on-site leased workers from Express...

  15. Provenance of white marbles from the nabatean sites of Qase Al Bint and colonnaded street baths at Petra, Jordan

    Science.gov (United States)

    Abu-Jaber, Nizar; al-Saad, Ziad; Shiyyab, Adnan; Degryse, Patrick

    Intercultural relations and trade are important components of understanding of historical interrelationships between regions and cultures. One of the most interesting objects of trade is stone, because of the expense and difficulty of its transport. Thus, the source of marble used in the Nabatean city of Petra was investigated using established petrological, geochemical and isotopic analyses. Specifically, marble from Qasr al Bint and the Colonnaded Street baths were sampled and investigated. The results of these analyses show that the marbles came from sources in Asia Minora and Greece. The most likely sources of the marble are the quarries of Thasos, Penteli, Prokennesos and Dokimeion. The choice of marble followed the desired utilitarian and aesthetic function of the stone. These results show that active trade in stone was part of the cultural interaction of the period.

  16. Rapid method to determine actinides and 89/90Sr in limestone and marble samples

    International Nuclear Information System (INIS)

    Maxwell, S.L.; Culligan, Brian; Hutchison, J.B.; Utsey, R.C.; Sudowe, Ralf; McAlister, D.R.

    2016-01-01

    A new method for the determination of actinides and radiostrontium in limestone and marble samples has been developed that utilizes a rapid sodium hydroxide fusion to digest the sample. Following rapid pre-concentration steps to remove sample matrix interferences, the actinides and 89 / 90 Sr are separated using extraction chromatographic resins and measured radiometrically. The advantages of sodium hydroxide fusion versus other fusion techniques will be discussed. This approach has a sample preparation time for limestone and marble samples of <4 h. (author)

  17. Early Cretaceous Ductile Deformation of Marbles from the Western Hills of Beijing, North China Craton

    Science.gov (United States)

    Feng, H.; Liu, J.

    2017-12-01

    During the Early Cretaceous tectonic lithosphere extension, the pre-mesozoic rocks from the Western Hills in the central part of the North China Craton suffered from weak metamorphism but intense shear deformation. The prominent features of the deformation structures are the coexisting layer-parallel shear zones and intrafolia folds, and the along-strike thickness variations of the marble layers from the highly sheared Mesoproterozoic Jing'eryu Formation. Platy marbles are well-developed in the thinner layers, while intrafolia folds are often observed in the thicker layers. Most folds are tight recumbent folds and their axial planes are parallel to the foliations and layerings of the marbles. The folds are A-type folds with hinges being always paralleling to the stretching lineations consistently oriented at 130°-310° directions throughout the entire area. SPO and microstructural analyses of the sheared marbles suggest that the thicker layers suffered from deformations homogeneously, while strain localization can be distinguished in the thinner layers. Calcite twin morphology and CPO analysis indicate that the deformation of marbles from both thinner and thicker layers happened at temperatures of 300 to 500°C. The above analysis suggests that marbles in the thicker layers experienced a progressive sequence of thermodynamic events: 1) regional metamorphism, 2) early ductile deformation dominated by relatively higher temperature conditions, during which all the mineral particles elongated and oriented limitedly and the calcite grains are deformed mainly by mechanical twinning, and 3) late superimposition of relatively lower temperature deformation and recrystallization, which superposed the early deformation, and made the calcites finely granulated, elongated and oriented by dynamical recrystallization along with other grains. Marbles from the thinner layers, however, experienced a similar, but different sequence of thermo-dynamic events, i.e. regional

  18. Characteristics of a calcite "limestone"-marble from Macedonia, used as flux material

    Directory of Open Access Journals (Sweden)

    Hristova E.

    2003-01-01

    Full Text Available The phase characteristics of calcite "limestone"-marble from Banjany area village (near Skopje, Macedonia were examined by means of XRD, SEM microscope in polarizing and reflected lights, chemical, DT/TG-analyses. It was concluded as follows: - calcite (CaCO3 is a major mineral component (cca 80-90 % prevailing in the marble over the other minerals - dolomite is generally of minor importance (cca 10-20 % in the rock - quartz, micas graphite, pyrite represent typical accessories. As result of the mentioned phase characteristics, this raw materials was for a long time (more than 30 years used as flux in the iron and steel metallurgy in Macedonia.

  19. Evaluation of water repellent treatments applied to stones used in andalusian cathedrals. II. Salt crystallization test

    Directory of Open Access Journals (Sweden)

    Villegas Sánchez, R.

    1993-06-01

    Full Text Available In a previous paper we have studied the changes that have ocurred in the properties related to water access and movement in the stone after the application of water repellent treatments. In this work we compare the weathering resistance of treated and untreated samples by means of sodium sulphate crystallization test. After finishing the test (75 cycles properties related to water have been measured again to know if the treatments have undergone any kind of deterioration and lose their water repellent characteristics.

    En un artículo anterior se han evaluado los cambios producidos en las propiedades relacionadas con el acceso y movimiento de agua en la piedra como consecuencia de la aplicación de tratamientos de hidrofugación. En este trabajo se compara la resistencia a la alteración producida por sales de las probetas tratadas y sin tratar, sometiéndolas al ensayo de cristalización de sulfato sódico. Tras finalizar el ensayo (75 ciclos se han medido nuevamente las propiedades relacionadas con el agua, con objeto de comprobar si los tratamientos han sufrido alguna alteración y si mantienen sus características hidrófugas.

  20. Building the Cathedral as Sanctuary: Recognizing Action as the Basis of Property

    Directory of Open Access Journals (Sweden)

    Justin Altman

    2010-04-01

    and economics should treat property claims is implicit.

  1. Capillary origami: superhydrophobic ribbon surfaces and liquid marbles

    Directory of Open Access Journals (Sweden)

    Glen McHale

    2011-03-01

    known to apply to superhydrophobic surfaces. The results are given for both droplets being wrapped by thin ribbons and for solid grains encapsulating droplets to form liquid marbles.

  2. Analysing deterioration of marble stones exposed to underwater conditions

    Science.gov (United States)

    Cámara, Beatriz; Álvarez de Buergo, Mónica; Bethencourt, Manuel; Freire-Lista, David; Fort, Rafael

    2016-04-01

    The peculiar conditions of the marine environment make the conservation of underwater archaeological sites an extremely complex procedure. This is due to the fact that the prevailing conditions in this environment promote the development of deterioration phenomena in submerged artefacts through the synergistic action of physical, chemical and biological factors. The objective of the present investigation was to determine how petrophysical properties of cultural heritage materials can be affected by being exposed to the specific underwater conditions of the sea bottom, and so, to evaluate how this can affect, in a long term, in their durability and evolution when they part of an archaeological site. For this purpose, two types of marble (the Italian Carrara and the Spanish Macael) were subjected to an experiment consisting of exposing stone materials for one and a half year to underwater conditions. The experimental test was located in an archaeological site in the Bay of Cadiz (southern Spain), Bajo del Chapitel (recognized as Cultural Interest), which includes remains of shipwrecks from different periods. In this site, samples were submerged to 12 m depth and placed in the sea bottom simulating the different positions in which underwater archaeological objects can be found (fully exposed, half buried and covered). Petrophysical characterisation involved determination of the apparent and bulk densities, water saturation (maximum water content a material may contain), open porosity (porosity accessible to water), chromatic parameters and ultrasonic velocity. Before measuring, samples were subjected to mechanical cleaning (in those samples with biological colonization) and to removal of salt deposits. Results showed significant differences in these petrophysical properties after underwater submersion, which were directly related to the type of underwater exposure condition. Comparative analysis of petrophysical properties, like the one conducted in this study

  3. The layout of urban construction in Bolghar in the late Golden Horde period (preliminary results of studies on materials of excavations Southwest of the Cathedral Mosque

    Directory of Open Access Journals (Sweden)

    Badeev Denis Yu.

    2014-06-01

    Full Text Available The results of the archaeological studies on a monumental building, identified in the central part of the Bolghar fortified settlement site, 150 meters southwest of the Cathedral Mosque, during the 1989-1993, 2000 and 2011-2013 works are presented. Adobe brick masonry and remains of wooden flooring have been recorded. Findings in the form of numerous a large number of commercial stock-in-trade items and coins allow interpreting this building as the city market. The authors of the excavations of the building date it back to the 50-70s of the 14th century. The structural elements of the construction and its internal layout suggest the existence of the city market at the intersection of two streets. The presence of street system in this part of the city is also indicated by the remains of two brickworks of mud bricks, which had served as a street fence (duval and referred to layers of the 30-40s of the 14th century. In the mid-14th century, the building of the city market had been being erected in place of the street fence and the adjoining estates. Thus, the development dynamics of Bolghar urban planning in the Late Golden Horde period on the site southwest of the Cathedral Mosque could be traced.

  4. Mechanisms of the multi-secular atmospheric corrosion of ferrous alloys: The case of the Metz cathedral reinforcements

    International Nuclear Information System (INIS)

    Bouchar, Marie

    2015-01-01

    The study of the mechanisms of the multi-secular atmospheric corrosion of ferrous alloys has various applications, from the preservation and restoration of cultural heritage metals, to the evaluation of their long term behaviour, specifically when they are used for the storage containers surrounding nuclear wastes. The study of the corrosion product layers (CPL) developed during 5 centuries on the Metz cathedral reinforcements brings new results for a better understanding of the complex processes involved in the formation of the atmospheric CPL. The phases and chemical elements constituting the CPL of these reinforcements were characterized at the micrometric scale (μDRX, Raman μ-spectroscopy (μRS), SEM-EDS). Results specifically showed that these CPL differ from other multi-secular systems previously studied by their very high content in ferri-hydrite (5Fe 2 O 3 , 9H 2 O). This very reactive phase is distributed in the whole CPL and mixed at the microscopic scale with goethite (a-FeOOH) and lepidocrocite (g-FeOOH). Diffusion experiments of bromide ions followed by in situ X-ray μ-fluorescence allowed a better understanding of the transport of dissolved species in the porous network of the CPL. Furthermore, a test of the corrosion system behavior in conditions simulating the wetting stage of the RH cycle of atmospheric corrosion, also followed in situ by μRS, highlighted the reduction of ferri-hydrite at the metal/CPL interface. These results allowed to verify for the first time a fundamental hypothesis about the mechanisms of very long term atmospheric corrosion. Finally, re-corrosion experiments of the corrosion system were monitored in a climatic chamber simulating accelerated atmospheric cycles in an 18 O-labelled environment. Then the detection of the 18 O isotope linked to the precipitated phases, by nuclear reaction analysis using a nuclear microprobe, allowed to localise the formation sites of the new corrosion products. All these results improve the

  5. New insights into the origin of ladder dikes: Implications for punctuated growth and crystal accumulation in the Cathedral Peak granodiorite

    Science.gov (United States)

    Wiebe, R. A.; Jellinek, A. M.; Hodge, K. F.

    2017-04-01

    Ladder dikes are steep tabular bodies, typically a meter or less thick, composed of moderately dipping, concave upward, alternating dark (i.e. schlieren) and light bands oriented roughly perpendicular to the ladder dike margins. These structures occur widely but sparsely in granitic rocks and are found prominently in the Cathedral Peak granodiorite (CPG) of the Tuolumne Intrusive suite. Previous studies have interpreted that ladder dikes form as a result of processes including the downward flow of crystal mush in cracks within strong crystal mush or by upward flow in steep tubes that migrate within a strong crystal mush. Our new observations indicate that ladder dikes formed by downward flow of crystal mush in troughs or valleys, in a manner potentially comparable to trough bands in mafic layered intrusions. Extensions of the schlieren outward and upward away from the ladder dike margins into the host granite demonstrate that the host granite was deposited as mounds on both sides at the same time as the ladder dikes. Ladder dikes, therefore, record lateral flows of crystal mush on a magma chamber floor. Vertical exposures suggest these flows are on the order of ten meters thick. Some steep exposures on granite domes indicate multiple ladder dikes (and flows) over a stratigraphic height of 80-100 m. Later (stratigraphically higher) flows commonly deform and erode the top of an earlier flow, and granitic material rich in K-feldspar megacrysts has locally engulfed large blocks of ladder dikes, demonstrating that the megacrysts were also transported in flows. Flows in the CPG are directed away from the center of the pluton toward the western and eastern margins and apparently spread along a strong crystal mush floor and into a rheologically complex CPG magma. Whereas established dynamical models for spreading (single phase) gravity currents with simple and complex rheologies explain the elongate geometry, spacing and orientation of the tabular bodies, the origin and

  6. The influence of the masonry mechanical properties in the structural behaviour of the Leon`s cathedral

    Directory of Open Access Journals (Sweden)

    Gálvez Ruiz, J. C.

    2009-06-01

    Full Text Available Mechanical and physical properties of the masonry have a considerable bearing on the structural behaviour. Ancient buildings, like Leon’s cathedral, show uncertainty about real condition of the material and even structural compounds. These uncertainties make it difficult to assessment the bearing capacity of the structure and the affect of the restorations. This paper shows a study to select the most influential material’s parameters on the structural behaviour. The study is based on a sensitiveness analysis.The study starts with a structural analysis to select the most responsible areas of the transversal structural section. Then, the structural calculation is done by modifying the value of the material’s parameters in the expected scatter band. The statistical study provides the most influential parameters on the structural masonry behaviour. Finally the conclusions are proponed.Las propiedades de un material como la fábrica influyen de forma determinante en el comportamiento de la estructura. En una estructura histórica, como la catedral de León, se añade la incertidumbre del estado real del material y la composición de sus elementos estructurales. Estos aspectos dificultan la evaluación de la capacidad resistente de la estructura y la incidencia de actuaciones de reparación o remodelación. Este trabajo presenta el estudio realizado para seleccionar, mediante un análisis de sensibilidad del comportamiento de la estructura, cuáles son las variables del material que más afectan al comportamiento estructural de la catedral.El estudio se inicia con el análisis estructural de la sección tipo para identificar las zonas de mayor responsabilidad. A continuación se hace el estudio estructural con la combinación de todas las variables, especialmente las dependientes de los materiales, modificando su valor. Mediante un tratamiento estadístico de los resultados, se determina qué parámetros de los adoptados afectan más al

  7. Algoma-type Neoproterozoic BIFs and related marbles in the Seridó Belt (NE Brazil)

    DEFF Research Database (Denmark)

    Sial, Alcides N.; Campos, Marcel S.; Gaucher, Claudio

    2015-01-01

    The Jucurutu Formation in the Seridó Belt, northeastern Brazil, encompasses fine-to coarse-grained amphibolite-facies marbles, locally with cross-bedding and stromatolites. Banded iron formations (BIF) at three localities in this belt comprise itabirites (actinolite- or cummingtonite-itabirite an...

  8. Genetics of Marbling in Wagyu Revealed by the Melting Temperature of Intramuscular and Subcutaneous Lipids

    Directory of Open Access Journals (Sweden)

    Sally S. Lloyd

    2017-01-01

    Full Text Available Extreme marbling or intramuscular deposition of lipid is associated with Wagyu breeds and is therefore assumed to be largely inherited. However, even within 100% full blood Wagyu prepared under standard conditions, there is unpredictable scatter of the degree of marbling. Here, we evaluate melting temperature (Tm of intramuscular fat as an alternative to visual scores of marbling. We show that “long fed” Wagyu generally has Tm below body temperature but with a considerable range under standardized conditions. Individual sires have a major impact indicating that the variation is genetic rather than environmental or random error. In order to measure differences of lower marbling breeds and at shorter feeding periods, we have compared Tm in subcutaneous fat samples from over the striploin. Supplementary feeding for 100 to 150 days leads to a rapid decrease in Tm of 50% Red Wagyu (Akaushi : 50% European crosses, when compared to 100% European. This improvement indicates that the genetic effect of Wagyu is useful, predictable, and highly penetrant. Contemporaneous DNA extraction does not affect the measurement of Tm. Thus, provenance can be traced and substitution can be eliminated in a simple and cost-effective manner.

  9. Declining Marbled Murrelet density, but not productivity, in the San Juan Islands, Washington, USA

    Science.gov (United States)

    Teresa J. Lorenz; Martin G. Raphael

    2018-01-01

    The Marbled Murrelet (Brachyramphus marmoratus) is federally threatened in part of its range in western North America. Information on density and productivity is important for managing populations. Over an 18-yr period, we monitored murrelet density and productivity ratios during the breeding season along 170 km of shoreline of the San Juan Islands...

  10. Investigation of the Effects of Marble Material Properties on the Surface Quality

    Directory of Open Access Journals (Sweden)

    Sümeyra Cevheroğlu Çıra

    2018-01-01

    Full Text Available This study aims to investigate the effects of material properties of marble on surface roughness and glossiness. For this purpose, four types of limestones were investigated. Physicomechanical properties of samples were determined through laboratory measurements. Mineralogical and petrographical characterizations were made using thin-section analysis. X-ray fluorescence (XRF semiquantitative method was used for chemical analysis. Six different grinding-polishing tests for each marble unit were done under fixed operational conditions using the same abrasive series. Relationship between the material properties and the surface quality was investigated. Although the polishing-grinding tests were conducted under the same operational conditions, different levels of roughness and glossiness were observed on different samples. Data obtained from the study proved that the main cause of this difference is textural and chemical composition variations of the marble specimen. Moreover, statistical evaluations showed that porosity, uniaxial compressive strength, and indirect tensile strength have strong effects on the surface roughness and glossiness of the marble specimen. The presence of an inverse relationship between the glossiness and roughness levels was determined as the result of this study as well.

  11. Study of marble provenience in antique artifacts found at Histria and Tomis

    International Nuclear Information System (INIS)

    Pentia, M.; Sharp, Z.; Nedelcu, L.; Alexandrescu-Vianu, M.

    1997-01-01

    The importance of assigning a correct provenience of ancient marble artifacts in detecting forgeries and in associating broken or separated fragments is obvious. The first use of isotopic analysis for marble provenience studies was that of Craig and Craig in 1972. The stable isotopic signature technique uses the deviation ratios for 13 C / 12 C and 18 O / 16 O relative to a conventional standard. This deviation is expressed as δ 13 C and δ 18 O. By statistical treatment of the data from the data base of some classical Greek and Roman marble quarries it could be possible to locate and to fix the extension of every quarry distribution point (δ 13 C, δ 18 O) as a scatter plot of these values. The quarry statistical characteristics could be described by a bivariate Gaussian distribution. Some marble artifacts found at Histria and Tomis sites were analyzed to determine their provenience using stable isotopic analysis and petrography. The main petrographic features are accessory mineral content, grain size, structures and texture. Comparison between the isotopic values of the samples and the ancient quarry data base was carried out by statistical methods. This allowed to find for every sample the confidence level of the provenience of any quarry of the data base, or the probability that any random point ( 13 C/ 12 C, 18 O/ 16 O) of a specific quarry falls to a distance greater than that of the measured sample point. (authors)

  12. GROWTH AND COLOUR PERFORMANCE OF THE CROSSBREED MARBLE STRAIN Betta splendens AND Betta imbellis

    Directory of Open Access Journals (Sweden)

    Eni Kusrini

    2015-12-01

    Full Text Available Betta ornamental fish of marble strain is a strain which is prefered by the hobbyists, because of its unique color, expensive price, and difficult to obtain the fish color strains. Therefore strain marble betta fish is still dominant for export quality for national and international contests. The aim of this study was to observe the growth and color performance of the crossedbreed marble strains of wild betta, Betta imbellis crossed with Betta splendens. The hybrids of B. imbellis (f x B. splendens (m (D had a specific length and weight rate, (1,113 ± 0.04%/day; 2,531 ± 0.14%/day; 26.61 ± 2.02 mm which was better than that of the hybrids B. imbellis (m x B. splendens (f (C (1,099 ± 0.02%/day; 2,244 ± 0.13%/day; 25.97 ± 1.33 mm; and 0.0027 ± 0.0003 mm. However, the survival rate of the C hybrids (42.19 ± 11.42% was higher than those of D (33.67%-17.08%. Based on the obtained results of the color identification the hybrids had as many as 15 characters of color, homozygous strains of marble which became the target of as much as 1%.

  13. Pyrite-pyrrhotite intergrowths in calcite marble from Bistriški Vintgar, Slovenia

    International Nuclear Information System (INIS)

    Zavašnik, J

    2016-01-01

    Roman marble quarry in Bistrica gorge in southern Pohorje Mt. (north-eastern Slovenia) is situated in a 20 m thick lens of layered marble, at the contact zone between granodiorite and metamorphites. Grey and yellowish non-homogenous calcite marble is heavily included by mica, quartz, feldspars, zoisite, pyrite and amphiboles. In the present research, we have studied numerous pyrite (FeS 2 ) crystals associated with yellowish-bronze non-stoichiometric pyrrhotite (Fe 1−x S), not previously reported from this locality. SEM investigation revealed unusual sequence of crystallisation: primary skeletal pyrrhotite matrix is sparsely overgrown by well-crystalline pyrite, both being overgrown by smaller, well-developed hexagonal pyrrhotite crystals of the second generation. With TEM we identify the pyrrhotite as 5T-Fe 1-x S phase, where x is about 0.1 and is equivalent to Fe 9 S 10 . The pyrite-pyrrhotite coexistence allows us a construction of fO 2 -pH diagram of stability fields, which reflects geochemical conditions at the time of marble re-crystallisation. (paper)

  14. More about the Puzzle of a Marble in a Spinning Pipe

    Science.gov (United States)

    Mungan, Carl E.

    2015-01-01

    What trajectory in the laboratory frame does a marble follow if it is held inside a freely rotating pipe and then suddenly released so that it can slide frictionlessly outward along the pipe? A previously published solution is only valid for a pipe of small moment of inertia (so that it is either low in mass or short in length).

  15. The localization of marbles from busts of the Residence at Munich

    International Nuclear Information System (INIS)

    Riederer, J.; Hoefs, J.

    1980-01-01

    51 Greek, Roman and Renaissance marble busts from the Antiquarium of the Residence in Munich were studied for their C- and O-isotopic composition. Apart from some overlapping values, this technique permits - contrary to microscopic and chemical methods - localization of different Turkish, Greek and Italian marbel deposits. (orig.) [de

  16. Genetics of Marbling in Wagyu Revealed by the Melting Temperature of Intramuscular and Subcutaneous Lipids

    Science.gov (United States)

    Valenzuela, Jose L.; Steele, Edward J.

    2017-01-01

    Extreme marbling or intramuscular deposition of lipid is associated with Wagyu breeds and is therefore assumed to be largely inherited. However, even within 100% full blood Wagyu prepared under standard conditions, there is unpredictable scatter of the degree of marbling. Here, we evaluate melting temperature (Tm) of intramuscular fat as an alternative to visual scores of marbling. We show that “long fed” Wagyu generally has Tm below body temperature but with a considerable range under standardized conditions. Individual sires have a major impact indicating that the variation is genetic rather than environmental or random error. In order to measure differences of lower marbling breeds and at shorter feeding periods, we have compared Tm in subcutaneous fat samples from over the striploin. Supplementary feeding for 100 to 150 days leads to a rapid decrease in Tm of 50% Red Wagyu (Akaushi) : 50% European crosses, when compared to 100% European. This improvement indicates that the genetic effect of Wagyu is useful, predictable, and highly penetrant. Contemporaneous DNA extraction does not affect the measurement of Tm. Thus, provenance can be traced and substitution can be eliminated in a simple and cost-effective manner. PMID:29201894

  17. Low breeding propensity and wide-ranging movements by marbled murrelets in Washington

    Science.gov (United States)

    Teresa J. Lorenz; Martin G. Raphael; Thomas D. Bloxton; Patrick G. Cunningham

    2016-01-01

    The marbled murrelet (Brachyramphus marmoratus) is a threatened seabird that forages in nearshore marine waters but nests inland, commonly in older coniferous forests. Information on ranging behavior and breeding propensity can be useful for informing management, especially when comparisons can be made between declining or threatened populations...

  18. 76 FR 61599 - Endangered and Threatened Wildlife and Plants; Revised Critical Habitat for the Marbled Murrelet

    Science.gov (United States)

    2011-10-05

    ... marbled murrelet nesting habitat include timber harvest, salvage logging, hazard tree removal, road... terrestrial environment, the presence of platforms (large branches or deformities) used for nesting in trees... milder, wetter conditions that favor development of larger trees and more abundant moss cover. The...

  19. Effect of Addition of A Marble Dust on Drying Shrinkage Cracks of Cement Mortar Reinforced with Various Fibers

    Directory of Open Access Journals (Sweden)

    Basim Thabit Al-Khafaji

    2017-05-01

    Full Text Available This investigation is conducted to study the effect of addition of marble powder (marble dust and different fibers on drying shrinkage cracks and some properties of fibers reinforcment cement mortar. Steel molds having a trapezoidal section, and the end restrained at square shape with( 2.7 meter at length are used to study restrained drying shrinkage of cement mortar. Specimens of ( compressive .flextural. splitting strength were cast. The admixture (marble dust was used to replacie weight of cement with three levels of (4%, 8% and 16% and the fiber hemp and sisal fiber were added for all mixes with proportion by volum of cement . All specimens were cured for (14 days. Average of three results was taken for any test of compressive, tensil and flextural strength. The experimental results showed that the adding of this admixture(marble dust cause adelay in a formation of cracks predicted from a drying shrinkage ,decreases of its width , and hence increases of (compressive, splitting tensil and flextural strength at levels of (4%, and 8%. Thus there is a the positive effect when fiberes added for all mixes of cement mortar with addition of (marble dust. All The admixtures (marble dust and fibers have the obvious visible effect in the delay of the information of shrinkage cracks and the decrease of its width as Compared to the cement mortar mixes when marble dust added a alone.

  20. Performance evaluation of two protective treatments on salt-laden limestones and marble after natural and artificial weathering.

    Science.gov (United States)

    Salvadori, Barbara; Pinna, Daniela; Porcinai, Simone

    2014-02-01

    Salt crystallization is a major damage factor in stone weathering, and the application of inappropriate protective products may amplify its effects. This research focuses on the evaluation of two protective products' performance (organic polydimethylsiloxane and inorganic ammonium oxalate (NH4)2(COO)2·H2O) in the case of a salt load from behind. Experimental laboratory simulations based on salt crystallization cycles and natural weathering in an urban area were carried out. The effects were monitored over time, applying different methods: weight loss evaluation, colorimetric and water absorption by capillarity measurements, stereomicroscope observations, FTIR and SEM-EDS analyses. The results showed minor impact exerted on the short term on stones, particularly those treated with the water repellent, by atmospheric agents compared to salt crystallization. Lithotypes with low salt load (Gioia marble) underwent minor changes than the heavily salt-laden limestones (Lecce and Ançã stones), which were dramatically damaged when treated with polysiloxane. The results suggest that the ammonium oxalate treatment should be preferred to polysiloxane in the presence of soluble salts, even after desalination procedures which might not completely remove them. In addition, the neo-formed calcium oxalate seemed to effectively protect the stone, improving its resistance against salt crystallization without occluding the pores and limiting the superficial erosion caused by atmospheric agents.

  1. Grazing incidence synchrotron X-ray diffraction of marbles consolidated with diammonium hydrogen phosphate treatments: non-destructive probing of buried minerals

    Science.gov (United States)

    Possenti, Elena; Colombo, Chiara; Conti, Claudia; Gigli, Lara; Merlini, Marco; Plaisier, Jasper Rikkert; Realini, Marco; Gatta, G. Diego

    2018-05-01

    Diammonium hydrogen phosphate (DAP)-based consolidating treatments react with carbonatic stones and form calcium phosphates phases, whose composition depends on the availability of free calcium ions. In this work, an innovative non-destructive approach based on grazing incidence X-ray diffraction (GIXRD) with synchrotron radiation (SR) is used to investigate DAP-treated Carrara marble specimens and to study the influence of the substrate composition on the crystallization of calcium phosphate phases. The outcomes indicate that the presence of compositional micro-heterogeneity of Carrara marble favours the formation of specific phases. Dicalcium phosphate dihydrate, a calcium phosphate with a low Ca/P molar ratio, is formed on carbonatic phases with a low Ca amount, such as dolomite grains and Mg-containing veins. Furthermore, this study highlights the potentialities of SR-GIXRD as a powerful non-destructive tool for the diagnostic of Cultural Heritage objects since it allows investigating the conservation history of stone materials and their interaction with the environment.

  2. An Assessment of Elemental Compositions and Concentrations in a Marble Sample from Hatnub Area using Internal Mono Standard Neutron Activation Analysis

    International Nuclear Information System (INIS)

    Soliman, N.F.; EL-Shershaby, A.; EL-Bahi, S.; Walley El-Dine, N.; Abd El-Halim, E.S.; Afifi, S.

    2012-01-01

    A marble sample was taken from Hatnub area near Asyot, where a high pollution is expected. The sample was specially treated and prepared for elemental analysis using the k 0 -based internal mono standard neutron activation analysis . The irradiation facility of the first Egyptian Training Research Reactor (ETRR-1) was used to irradiate the sample together with gold and zirconium monitor samples. The pneumatic irradiation rabbit system (PIRS) built in the vertical thermal column of the second Egyptian Training Research Reactor (ETRR-2) was used to irradiate another weight of the marble sample and a sample from a certificated reference material JB-1 for short time irradiation. A new method was developed to measure the thermal to epithermal neutron flux ratio and the deviation in the real epithermal neutron spectrum ( 1/E 1±a lpha ) from the ideal (1/E ). The elemental analysis was carried out by high-resolution gamma-ray spectrometry. The accuracy of the internal mono standard method has been evaluated by analyzing the JB-1 certified reference material

  3. Carbon mineralization in mine tailing ponds amended with pig slurries and marble wastes

    Directory of Open Access Journals (Sweden)

    Raul Zornoza

    2012-07-01

    Full Text Available Effective application of organic residues to reclaim soils requires the optimization of the waste management to minimize CO2 emissions and optimize soil C sequestration efficiency. In this study, the short-term effects of pig slurry amendment alone and together with marble waste on organic matter mineralization in two tailing ponds from Cartagena-La Unión Mining District (SE Spain were investigated in a field remediation experiment. The treatments were: marble waste (MW, pig slurry (PS, marble waste + pig slurry (MW+PS, and control. Soil carbon mineralization was determined using a static chamber method with alkali absorption during 70 days. Soil respiration rates in all plots were higher the first days of the experiment owing to higher soil moisture and higher mean air temperature. MW plots followed the same pattern than control plots, with similar respiration rates. The addition of pig slurry caused a significant increase in the respiration rates, although in MW+PS plots, respiration rates were lower than in PS plots. The cumulative quantities of C-CO2 evolved from the pig slurry mineralization were fitted to a first-order kinetic model explaining 90% of the data. This model implies the presence of only one mineralisable pool (C0. The values of the index C0*constant rate/added C were similar for PS plots in both tailing ponds, but lower in the MW+PS treatment, suggesting that the application of marble reduces the degradability of the organic compounds present in the pig slurry. Thus, the application of marble wastes contributes to slow down the loss of organic matter by mineralization.

  4. Utilization of the waste from the marble industry for application in transport infrastructure: mechanical properties of cement pastes

    Science.gov (United States)

    Prošek, Zdeněk; Trejbal, Jan; Topič, Jaroslav; Plachý, Tomáš; Tesárek, Pavel

    2017-09-01

    This article is focused on the mechanical testing of cement-based samples containing a micronized waste marble powder used as replacement of standard binders. Tested materials consisted of cement CEM I 42.5 R (Radotín, Czech Republic) and three different amounts of the marbles (25, 50 and 70 wt. %). Standard bending and compressive tests of the prismatic samples having dimensions equal to 40 × 40 × 160 mm were done in order to reveal an influence of marble amount on flexural and compressive strength, respectively. Moreover, the dynamic modulus of elasticity and dynamic shear modulus were examined and compared after 7 and 28 days of mixture curing.

  5. A cathedral for Chernobyl

    International Nuclear Information System (INIS)

    Bauer, A.

    2004-01-01

    A containment shell will protect the Chernobyl reactor. The candidate enterprises for this containment shell construction, proposed gigantic buildings, which will be a great technical challenge. The author presents the project and wonders on the cost and the financing. (A.L.B.)

  6. Characterization of marble waste for manufacture of artificial stone; Caracterizacao de residuo de marmore para fabricacao de rocha artificial

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, M.C.; Silva, A.G.P., E-mail: maricostalonga2@gmail.com [Universidade Estadual do Norte Fluminense (UENF/LAMAV), Campos dos Goytacazes, RJ (Brazil). Laboratorio de Materiais Avancados; Gadioli, M.C.B. [Centro de Tecnologia Mineral (CETEM/NR-ES), Cachoeiro de Itapemirim, ES (Brazil)

    2016-07-01

    This work aims to study the characterization of marble waste for the manufacture of artificial stone. The characterization of the waste was performed through X-ray fluorescence, X-ray diffraction, particle size distribution, scanning electron microscopy and confocal microscopy. The results indicated that the marble waste presents typical composition of a dolomite, calcite marble, and their minerals are: Calcite (CaCO{sub 3}) and dolomite (MgCa (CO{sub 3}){sub 2}. The waste presented predominance of particles below 200 mesh screen. This may be interesting for the production of artificial stone better visual appearance, such as marmoglass, for example. The results indicate that the use of marble waste for production of artificial stone is feasible and environmentally friendly alternative to give a destination for this waste generated in the order of millions of tons representing serious environmental problem. (author)

  7. Protecting of Marble Stone Facades of Historic Buildings Using Multifunctional TiO2 Nanocoatings

    Directory of Open Access Journals (Sweden)

    Mohammad A. Aldoasri

    2017-11-01

    Full Text Available Stone surfaces and façades of historic buildings, due to their predominately outdoor location, suffer from many deterioration factors, including air pollution, soluble salts, relative humidity (RH/temperature, and biodeterioration, which are the main causes of decay. In particular, the façades of the buildings deteriorate with direct exposure to these factors; deformation and disfiguration of superficial decoration and formation of black crusts are often observed on the stones. The development and application of self-cleaning and protection treatments on historical and architectural stone surfaces could be a significant improvement in the conservation, protection and maintenance of Cultural Heritage. A titanium dioxide nanoparticle has become a promising photocatalytic material, owing to its ability to catalyze the complete degradation of many organic contaminants and environmental factors. In this study, TiO2 nanoparticles, dispersed in an aqueous colloidal suspension, were applied directly to historic marble stone surfaces, by spray-coating, in order to obtain a nanometric film over the stone surface. The study started with an investigation of some properties of TiO2 nanoparticles, to assess the feasibility of the use of TiO2 on historic stone and architectural surfaces. Scanning electron microscopy (SEM was, coupled with energy dispersive X-ray (EDX microanalysis, (SEM-EDX, in order to obtain information on coating homogeneity and surface morphology, before and after artificial aging; the activity of the coated surface was evaluated through UV-light exposure, to evaluate photo-induced effects. The changes of molecular structure occurring in treated samples were spectroscopically studied by attenuated total reflection infrared spectroscopy (ATR-FTIR; activity of the hydrophobic property of the coated surface was evaluated by Sterio microscopy, model Zeiss 2010 from Munich, Germany, equipped with photo camera S23 under 80X magnification. The

  8. "Belgian black and red marbles" as potential candidates for Global Heritage Stone Resource

    Science.gov (United States)

    Tourneur, Francis; Pereira, Dolores

    2016-04-01

    The Paleozoic substrate of South Belgium is rich in compact limestones, able to take a good polished finishing and to be used as "marbles". Among them, the black and red varieties were and still are of special importance, intensively exploited and largely exported, almost worldwide. The pure black marbles were extracted mostly from Frasnian (Upper Devonian) and Viséan (Lower Carboniferous) strata, in many localities like Namur, Dinant, Theux and Basècles. Today only the Frasnian variety is still exploited in a spectacular underground quarry in Golzinne, close to the town of Gembloux. These black marbles, already known in Antiquity, were exported since the Middle Age, first in Western Europe, then, from the 19th c., at a larger scale, almost worldwide. Among their most frequent uses figured of course funeral objects, like the epitaph of the Pope Adrian the 1st, offered by Charlemagne and preserved in the St-Pieter basilica in Rom. Another famous reference is the tombs of the Dukes of Burgundy in Dijon, with white crystalline marble and alabaster. The red marbles are limestones from reefal origin, forming mudmounds more or less rich in fossils of Late Frasnian (Late Devonian) age. They show a strong variability in colors, from dark red to light pinkish grey, and in texture, with many sedimentary structures and/or tectonic veins. The outcrops are non-stratified, which allows extraction of large blocks, for example for high columns. Known in the Roman time, they were intensively exploited since at least the 16th c. During the 19th and beginning of 20th c., more than hundred quarries were active in South Belgium, from Rance at West to Chaudfontaine at East, around Philippeville and Rochefort. They were largely used both in civil and religious buildings, mostly for inside decoration, for examples as altars or fireplaces. Among the most symbolic places, the Belgian red marbles were massively employed in Versailles, like in the famous "Galerie des Glaces". But many

  9. Euridice by Giulio Caccini: Two (? Copies of the Original Score Held in the Cathedral of Ljubljana around 1620

    Directory of Open Access Journals (Sweden)

    Metoda Kokole

    2012-07-01

    tragic loss of Eurydice and on Orpheus’ despair: on his ‘magic’ song that makes the underworld deities return his beloved to life. Omitting Eurydice’s second death, the opera has her and her Orpheus return to the meadow, where it ends with a happy chorus of nymphs and shepherds. Caccini’s Euridice did not have a wide dissemination in the early 17th century, but somehow the score (published in a single volume, as a score for a single voice and instrumental bass with some four- and five-part choruses found its way into the music collection of the Cathedral of Ljubljana, where it was first recorded in 1620 as »Euridice Giulii Cazini in folio«. Another hand added »desunt«, meaning that the second review had found it missing. At the next review, however, a third hand added new information, »L’euridice composta Julii Caccini liber solus«, probably referring to the same copy – now found – rather than to a second copy. Unfortunately neither of the music items listed in the above-mentioned inventory survives, so these two short notes are the only testimony to an early presence of Giulio Caccini’s Euridice in Ljubljana. The article discusses some possible theories on why and how the score might have entered the Ljubljana inventory.

  10. Macroscópical morphology of deterioration of the stone in the Cathedral of Almería/Spain

    Directory of Open Access Journals (Sweden)

    Alcalde, M.

    1991-06-01

    Full Text Available The prevailing winds in the area, associated with an important rising damp are the main natural factors of deterioration that affect the Cathedral of Almería. Certain unfortunate maintenance Jobs carried out as well as the bombardments and machine-gunning on the building during the Civil War can be indicated as anthropogenical factors of deterioration. The only lithotype used in the construction is a dolomitic limestone of high porosity from quarries near the city. The increase in volume in capillaries and interstices, related whith the presence of salts, and the dissolution, due to the great solubility of the natural magnesium salts which can produce dedolomitization of the stone, are the main deterioration mechanisms. This leads to indicators of deterioration with a typical morphology consisting of openings in all its manifestations (pitting, alveolar erosions and craters especially on the high and low parts of the building where the wind and humidity, respectively, are more intense. The anthropogenical deterioration also has the shape of openings, such as the impact of bullets and obuses on the Southern facade and the grooves made for electric cables throughout the building. Diverse restorations have introduced tensions in the materials which have led to decohesions at different degrees (disaggregations, disintegrations and grain disgregations in the interior of the temple and cloister. The building is in a state of deterioration of a certain significance which essentially affects its esthetics. The speed in the degrading process observed in some areas calls for action for its maintenance.

    Los vientos reinantes en la zona, asociados a una importante humedad ascendente, son los principales factores naturales de alteración que afectan a la Catedral de Almería. Pueden señalarse como factores antropogénicos de alteración ciertas desafortunadas labores de mantenimiento llevadas a cabo, así como, aunque con carácter episódico, los

  11. Use of a bovine genome array to identify new biological pathways for beef marbling in Hanwoo (Korean Cattle

    Directory of Open Access Journals (Sweden)

    Lim Da-jeong

    2010-11-01

    Full Text Available Abstract Background Marbling (intramuscular fat is a valuable trait that impacts on meat quality and an important factor determining price of beef in the Korean beef market. Animals that are destined for this high marbling market are fed a high concentrate ration for approximately 30 months in the Korean finishing farms. However, this feeding strategy leads to inefficiencies and excessive fat production. This study aimed to identify candidate genes and pathways associated with intramuscular fat deposition on highly divergent marbling phenotypes in adult Hanwoo cattle. Results Bovine genome array analysis was conducted to detect differentially expressed genes (DEGs in m. longissimus with divergent marbling phenotype (marbling score 2 to 7. Three data-processing methods (MAS5.0, GCRMA and RMA were used to test for differential expression (DE. Statistical analysis identified 21 significant transcripts from at least two data-processing methods (P . All 21 differentially expressed genes were validated by real-time PCR. Results showed a high concordance in the gene expression fold change between the microarrays and the real time PCR data. Gene Ontology (GO and pathway analysis demonstrated that some genes (ADAMTS4, CYP51A and SQLE over expressed in high marbled animals are involved in a protein catabolic process and a cholesterol biosynthesis process. In addition, pathway analysis also revealed that ADAMTS4 is activated by three regulators (IL-17A, TNFα and TGFβ1. QRT-PCR was used to investigate gene expression of these regulators in muscle with divergent intramuscular fat contents. The results demonstrate that ADAMTS4 and TGFβ1 are associated with increasing marbling fat. An ADAMTS4/TGFβ1 pathway seems to be associated with the phenotypic differences between high and low marbled groups. Conclusions Marbling differences are possibly a function of complex signaling pathway interactions between muscle and fat. These results suggest that ADAMTS4

  12. Digital models applied to the intervention of the architectural heritage: Restoration Southeast closing of the door of San Cristobal Cathedral of Seville

    Directory of Open Access Journals (Sweden)

    Francisco Pinto Puerto

    2015-10-01

    Full Text Available Interventions in historical heritage present an opportunity to gain a deeper knowledge of the element in question. The use of an appropriate methodology and the rational application of the technologies now available allow researchers from different disciplines to obtain valuable information that must be recorded and placed at the disposal of society in general. The recent consolidation works carried out on the finial of the spiral staircase of the San Cristóbal Door of Seville Cathedral is a case in point. In addition to creating an elevation of this architectural element, a virtual model was generated, incorporating all the data obtained during the course of the works. The theoretical bases were explored prior to creating the model, highlighting the importance of a profound preliminary analysis as well as the dissemination possibilities.

  13. Moors, Christians and Jews under the bark of a sonnet by Góngora to the Cathedral-Mosque of Córdoba

    Directory of Open Access Journals (Sweden)

    Daniel Waissbein

    2014-12-01

    Full Text Available “Si ya la vista de llorar cansada” is not an amorous sonnet, and does not invoke the country mansion of an earthly beauty, from which the poet has been banished. It refers instead, to the Cathedral of Córdoba, dedicated to the Virgin Mary. Close in form and in subject-matter to the more famous “Oh excelso muro, oh torres coronadas”, it hides a veiled sadness for the fate of those who built the Mosque, and for the expulsion of the Jews from Spain. This is present in the allusion, both in the first and the last line, to their Babylonian exile. These aspects point to the author’s circumspect sympathy for the contemporary destiny of both communities, Jewish and Moslem.

  14. Inhibition of acid mine drainage and immobilization of heavy metals from copper flotation tailings using a marble cutting waste

    Science.gov (United States)

    Tozsin, Gulsen

    2016-01-01

    Acid mine drainage (AMD) with high concentrations of sulfates and metals is generated by the oxidation of sulfide bearing wastes. CaCO3-rich marble cutting waste is a residual material produced by the cutting and polishing of marble stone. In this study, the feasibility of using the marble cutting waste as an acid-neutralizing agent to inhibit AMD and immobilize heavy metals from copper flotation tailings (sulfide- bearing wastes) was investigated. Continuous-stirring shake-flask tests were conducted for 40 d, and the pH value, sulfate content, and dissolved metal content of the leachate were analyzed every 10 d to determine the effectiveness of the marble cutting waste as an acid neutralizer. For comparison, CaCO3 was also used as a neutralizing agent. The average pH value of the leachate was 2.1 at the beginning of the experiment ( t = 0). In the experiment employing the marble cutting waste, the pH value of the leachate changed from 6.5 to 7.8, and the sulfate and iron concentrations decreased from 4558 to 838 mg/L and from 536 to 0.01 mg/L, respectively, after 40 d. The marble cutting waste also removed more than 80wt% of heavy metals (Cd, Cr, Cu, Ni, Pb, and Zn) from AMD generated by copper flotation tailings.

  15. Eosinophilic myositis resulted from Sarcocystis infection in prime marbled beef of Japanese black cattle

    Directory of Open Access Journals (Sweden)

    Tohru Kimura

    Full Text Available Partial changes of color (greenish to brownish were found in prime marbled beef of Japanese black cattle. The disseminated lesions of the skeletal muscles were histopathologically examined in relation to Sarcocystis infection. The lesions in the muscles showed granulomas with inflammatory cell infiltration. The sarcocysts had a distinct wall, which was radically striated by palisading villar protrusions. The sarcocyst wall was surrounded by degenerative eosinophils and necrotic muscle fibers. In conclusion, eosinophilic myositis in prime marbled beef of Japanese black cattle resulted from Sarcocystis spp. infection. The muscular lesions were characterized by the presence of granulomas and capsulated sarcocysts surrounded by numerous eosinophils. [Vet. World 2011; 4(11.000: 500-502

  16. Analysis of thermal stability of ceramic engobes developed with marble reject

    International Nuclear Information System (INIS)

    Carlos, E.M.; Assis, R.B.; Sousa, R.F.; Galvao, A.C.P.; Mendes, J.U.L.

    2014-01-01

    Considering the technological growth and technical production in the ceramic industry, ceramic mass formulations were evaluated with addition of marble residue to substitute the quartz for obtaining of engobes. Five formulations were prepared varying the proportions of raw material, sieved at 200 mesh, ball mill homogenised, characterized by fluorescence (FRX) and X-ray diffraction (XRD). Samples were separated from the formulations for thermal analysis (TG / DSC) and dilatometry. The specimens were prepared in uniaxial press (25 Mpa). The FIII and FIV formulations presented satisfactory results, evidencing the potential of replacing quartz by the marble residue in ceramic formulation for engobes, minimizing the environmental impact by the undue discard of waste, reducing costs and increasing the range of raw materials for the coatings industry

  17. Bending of marble with intrinsic length scales: a gradient theory with surface energy and size effects

    International Nuclear Information System (INIS)

    Vardoulakis, I.; Kourkoulis, S.K.; Exadaktylos, G.

    1998-01-01

    A gradient bending theory is developed based on a strain energy function that includes the classical Bernoulli-Euler term, the shape correction term (microstructural length scale) introduced by Timoshenko, and a term associated with surface energy (micromaterial length scale) accounting for the bending moment gradient effect. It is shown that the last term is capable to interpret the size effect in three-point bending (3PB), namely the decrease of the failure load with decreasing beam length for the same aspect ratio. This theory is used to describe the mechanical behaviour of Dionysos-Pentelikon marble in 3PB. Series of tests with prismatic marble beams of the same aperture but with different lengths were conducted and it was concluded that the present theory predicts well the size effect. (orig.)

  18. 3D Visualization of Sheath Folds in Roman Marble from Ephesus, Turkey

    Science.gov (United States)

    Wex, Sebastian; Passchier, Cornelis W.; de Kemp, Eric A.; Ilhan, Sinan

    2013-04-01

    Excavation of a palatial 2nd century AD house (Terrace House Two) in the ancient city of Ephesus, Turkey in the 1970s produced 10.313 pieces of colored, folded marble which belonged to 54 marble plates of 1.6 cm thickness that originally covered the walls of the banquet hall of the house. The marble plates were completely reassembled and restored by a team of workers over the last 6 years. The plates were recognized as having been sawn from two separate large blocks of "Cipollino verde", a green mylonitized marble from Karystos on the Island of Euboea, Greece. After restoration, it became clear that all slabs had been placed on the wall in approximately the sequence in which they had been cut off by a Roman stone saw. As a result, the marble plates give a full 3D insight in the folded internal structure of 1m3 block of mylonite. The restoration of the slabs was recognized as a first, unique opportunity for detailed reconstruction of the 3D geometry of m-scale folds in mylonitized marble. Photographs were taken of each slab and used to reconstruct their exact arrangement within the originally quarried blocks. Outlines of layers were digitized and a full 3D reconstruction of the internal structure of the block was created using ArcMap and GOCAD. Fold structures in the block include curtain folds and multilayered sheath folds. Several different layers showing these structures were digitized on the photographs of the slab surfaces and virtually mounted back together within the model of the marble block. Due to the serial sectioning into slabs, with cm-scale spacing, the visualization of the 3D geometry of sheath folds was accomplished with a resolution better than 4 cm. Final assembled 3D images reveal how sheath folds emerge from continuous layers and show their overall consistency as well as a constant hinge line orientation of the fold structures. Observations suggest that a single deformation phase was responsible for the evolution of "Cipollino verde" structures

  19. Capacitive Sensing for Contact-less Proximity Detection in Industrial Marble Machines

    Directory of Open Access Journals (Sweden)

    Sergio Saponara

    2010-02-01

    Full Text Available The paper presents the design and experimental characterization of capacitive sensors, plus the relevant front-end acquisition circuitry, for process control in industrial marble machines. The new developed sensing system allows detecting, in real-time and without any contact, the presence of stone samples under the abrasive/cutting heads in an industrial machine. The obtained detection signal is needed as a feedback to improve the automatic control of the polishing/cutting process in marble industry. Different types of sensors are proposed whose performances are assessed through experimental test campaigns considering real industrial working conditions. Compared to state-of-art sensors the proposed solutions allow for a reliable detection while being of low complexity and robust to harsh environment conditions.

  20. Spectroscopic characterization of Greek dolomitic marble surface interacted with uranium and thorium in aqueous solutions

    International Nuclear Information System (INIS)

    Godelitsas, A.; Kokkoris, M.; Chatzitheodoridis, E.; Misaelides, P.

    2008-01-01

    The surface of a typical Greek (Thassian) dolomitic marble was studied after interaction with U- and Th-containing aqueous solutions (1000 mg/L, free-drift experiments for 1 week at atmospheric P CO 2 ), using 12 C-RBS and Laser μ-Raman spectroscopy. Powder-XRD and SEM-EDS were also applied to investigate the phases deposited on the surface of the interacted samples. The obtained results indicated a considerable removal of U from the aqueous medium mainly due to massive surface precipitation of amorphous UO 2 -hydroxide phases forming a relatively thick (μm-sized) coating on the carbonate substrate. The interaction of Th with dolomitic marble surface is also intense leading to a formation of an amorphous Th-hydroxide layer of similar thickness but of significantly lower elemental atomic proportion

  1. Spectroscopic characterization of Greek dolomitic marble surface interacted with uranium and thorium in aqueous solutions

    Energy Technology Data Exchange (ETDEWEB)

    Godelitsas, A. [Faculty of Geology and Geoenvironment, University of Athens, 15784 Zographou, Athens (Greece)], E-mail: agodel@geol.uoa.gr; Kokkoris, M. [School of Applied Mathematics and Physics, National Technical University of Athens, 15780 Zographou, Athens (Greece); Chatzitheodoridis, E. [School of Mining and Metallurgical Engineering, National Technical University of Athens, 15780 Zographou, Athens (Greece); Misaelides, P. [Faculty of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece)

    2008-05-15

    The surface of a typical Greek (Thassian) dolomitic marble was studied after interaction with U- and Th-containing aqueous solutions (1000 mg/L, free-drift experiments for 1 week at atmospheric P{sub CO{sub 2}}), using {sup 12}C-RBS and Laser {mu}-Raman spectroscopy. Powder-XRD and SEM-EDS were also applied to investigate the phases deposited on the surface of the interacted samples. The obtained results indicated a considerable removal of U from the aqueous medium mainly due to massive surface precipitation of amorphous UO{sub 2}-hydroxide phases forming a relatively thick ({mu}m-sized) coating on the carbonate substrate. The interaction of Th with dolomitic marble surface is also intense leading to a formation of an amorphous Th-hydroxide layer of similar thickness but of significantly lower elemental atomic proportion.

  2. Spectroscopic characterization of Greek dolomitic marble surface interacted with uranium and thorium in aqueous solutions

    Science.gov (United States)

    Godelitsas, A.; Kokkoris, M.; Chatzitheodoridis, E.; Misaelides, P.

    2008-05-01

    The surface of a typical Greek (Thassian) dolomitic marble was studied after interaction with U- and Th-containing aqueous solutions (1000 mg/L, free-drift experiments for 1 week at atmospheric PCO2), using 12C-RBS and Laser μ-Raman spectroscopy. Powder-XRD and SEM-EDS were also applied to investigate the phases deposited on the surface of the interacted samples. The obtained results indicated a considerable removal of U from the aqueous medium mainly due to massive surface precipitation of amorphous UO2-hydroxide phases forming a relatively thick (μm-sized) coating on the carbonate substrate. The interaction of Th with dolomitic marble surface is also intense leading to a formation of an amorphous Th-hydroxide layer of similar thickness but of significantly lower elemental atomic proportion.

  3. Textural attributes and oxidative stability of pork longissimus muscle injected with marbling-like emulsified lipids.

    Science.gov (United States)

    Ma, Lizhen; Xiong, Youling L

    2011-10-01

    The objective of the study was to create marbling-like fat in lean pork with acceptable oxidative stability through the injection of canola/olive oil-substituted emulsions. Pork loins were injected with 5% water as control (CW) or 5% emulsion containing no tocopherols (E) or 0.07% tocopherols (ET) and stored at 2 °C in an oxygen-enriched package for up to 3 weeks. Lipid oxidation was totally inhibited in ET pork but increased 3-fold to 0.20mg malonaldehyde/kg in CW and E pork after 3 weeks. ET treatment also had a positive effect on meat red color. Emulsion-containing pork, showing less protein oxidation (carbonyl and disulfide formation), had reduced drip loss and shear force than CW samples (Pemulsions could create marbling-like texture in lean pork without compromising oxidative stability. Copyright © 2011. Published by Elsevier Ltd.

  4. Insertion of marble waste in the production chain of glass wool

    International Nuclear Information System (INIS)

    Rodrigues, G.F.; Alves, J.O.; Espinosa, D.C.R.; Tenorio, J.A.S.

    2010-01-01

    The work aimed the study of the recycle of the waste from marble cutting, aiming the reuse as partial raw material in the production of glass wool. Glass wool are materials with chemical and mechanical resistance, durability and lightness, and also important thermo-acoustic properties. A mixture of the waste with chemical additives was melted in a laboratory electric furnace using temperature of 1450 deg C. The melted material was directly poured in a water-filled recipient aiming the rapidly cooling. Samples of the produced material were characterized by XRD, SEM and DTA. The results showed that the residue from marble cutting can be inserted into the productive chain of glass wool, providing a decrease in the extraction of mineral resources, a profitable destination for this waste, and a economy for the companies producer of thermo-acoustic insulators. (author)

  5. Study of marbles from Middle Atlas (Morocco): elemental, mineralogical and structural analysis

    Science.gov (United States)

    Khrissi, S.; Bejjit, L.; Haddad, M.; Falguères, C.; Ait Lyazidi, S.; El Amraoui, M.

    2018-05-01

    A series of marbles sampled from the region of Middle Atlas (Morocco), are characterized by different complementary spectroscopic techniques. X-Ray fluorescence is used to determine elemental composition of rock while X-Ray diffraction and the Raman spectroscopy are used to determine major crystalline phases (calcite and dolomite) and minor ones (quartz).The samples display typical EPR spectra of Mn2+ in calcite and reveal the presence of Fe3+ ions.

  6. Transformation of the Surface Structure of Marble under the Action of a Shock Wave

    Science.gov (United States)

    Shcherbakov, I. P.; Vettegren, V. I.; Bashkarev, A. Ya.; Mamalimov, R. I.

    2018-01-01

    The structure of marble fracture fragments formed after the destruction under the action of a shock wave have been analyzed by Raman, infrared, and luminescence spectroscopic techniques. It has been found that calcite I in the surface layer of fragments with thicknesses of about 2 μm is transformed into high-pressure phase calcite III. At the same time, concentrations of Mn2+, Eu3+, and other ions decrease to about onefourth of their initial values.

  7. Radiological significance of marble used for construction of dwellings in Bangladesh

    International Nuclear Information System (INIS)

    Ghose, S.; Asaduzzaman, Kh.; Zaman, N.

    2012-01-01

    The natural γ-radiation in samples of a variety of marbles imported into Bangladesh for use in building construction was measured, employing γ-ray spectrometry with a HPGe detector. From the measured γ-ray spectra, activity concentrations were determined for 226 Ra (29.31 ± 2.06 to 46.99 ± 2.97 Bq.kg -1 ), 232 Th (42.91 ± 2.53 to 62.92 ± 3.37 Bq.kg -1 ) and 40 K (824.42 ± 15.42 to 1071.58 ± 20.14 Bq.kg -1 ). The measured activity concentrations for these natural radionuclides were compared with the reported data of other countries and with the world average activity of soil. The radium equivalent activity (Ra eq ), the hazard indices, the gamma activity concentration index, the indoor absorbed dose rate and the corresponding annual effective dose were estimated for the potential radiological hazard of the marble. The Ra eq values of all marble samples are lower than the limit of 370 Bq.kg -1 , equivalent to a dose of 1.5 mSv.y -1 . The average values of the external and internal hazard indices are less than unity. The average indoor absorbed dose rate (121.25 nGy.h -1 ) is higher than the population-weighted average of 84 nGy.h -1 , whereas the corresponding annual dose limit falls within an average value of 0.60 mSv, which is an order of magnitude below the limit specified for building materials in the literature. The present results indicate that using marble in building construction in Bangladesh does not pose any significant radiological hazard. (authors)

  8. Radiological significance of marble used for construction of dwellings in Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Ghose, S. [Bangladesh Atomic Energy Commission, GPO, Box 158, Dhaka (Bangladesh); Nuclear Safety and Radiation Control Division, 4 Kazi Nauru Islam Avenue, Ramna, Dhaka (Bangladesh); Asaduzzaman, Kh. [Bangladesh Atomic Energy Commission, GPO, Box 158, Dhaka (Bangladesh); Zaman, N. [Bangladesh University of Engineering and Technology, Dhaka (Bangladesh)

    2012-01-15

    The natural {gamma}-radiation in samples of a variety of marbles imported into Bangladesh for use in building construction was measured, employing {gamma}-ray spectrometry with a HPGe detector. From the measured {gamma}-ray spectra, activity concentrations were determined for {sup 226}Ra (29.31 {+-} 2.06 to 46.99 {+-} 2.97 Bq.kg{sup -1}), {sup 232}Th (42.91 {+-} 2.53 to 62.92 {+-} 3.37 Bq.kg{sup -1}) and {sup 40}K (824.42 {+-} 15.42 to 1071.58 {+-} 20.14 Bq.kg{sup -1}). The measured activity concentrations for these natural radionuclides were compared with the reported data of other countries and with the world average activity of soil. The radium equivalent activity (Ra{sub eq}), the hazard indices, the gamma activity concentration index, the indoor absorbed dose rate and the corresponding annual effective dose were estimated for the potential radiological hazard of the marble. The Ra{sub eq} values of all marble samples are lower than the limit of 370 Bq.kg{sup -1}, equivalent to a dose of 1.5 mSv.y{sup -1}. The average values of the external and internal hazard indices are less than unity. The average indoor absorbed dose rate (121.25 nGy.h{sup -1}) is higher than the population-weighted average of 84 nGy.h{sup -1}, whereas the corresponding annual dose limit falls within an average value of 0.60 mSv, which is an order of magnitude below the limit specified for building materials in the literature. The present results indicate that using marble in building construction in Bangladesh does not pose any significant radiological hazard. (authors)

  9. Marble Deterioration and Climate: Examples from the Schlossbrücke Berlin

    Science.gov (United States)

    Pirskawetz, S.; Siegesmund, S.; Weise, F.; Rieffel, Y.; Plagge, R.

    2012-04-01

    Protective structures for works of art or antique artefacts have a long architectural tradition and have been known in Germany since the 19th century. The effect of such covers on the microclimate around artworks of natural stone, and hence, their protective capability are insufficiently documented and understood. In 2007, an inter-disciplinary model project and part of a pilot study coordinated by the Berlin State Office for the Protection of Monuments was planned with the aim of developing an innovative winter covering system for marble statuaries located on the Schlossbrücke in Berlin. Such a system would need to fulfil the various requirements for structural stability, aesthetics, climate and practical use. This applied research represents the first complex scientific study of the sustainability of a winter covering system. A climate monitoring system was designed to create a dense database for the numerical prediction of the effect of protective systems, and to compare the given climate conditions to the known factors influencing the marble deterioration. Based on these findings a prototype of an innovative shelter was designed and tested. The project shows, that beside a temporary covering regular inspection and maintenance combined with regular cleaning ensures an effective and sustainable protection of marble sculptures. Such a maintenance program is the precondition for preserving the sculptures of the Schlossbrücke as a historical ensemble. Important scientific results of the project are transferable to similar objects of Carrara marble. The results throw a new light on the conventional protection of such objects and leads to a discussion on the necessity of an all-season protection.

  10. A procedure to detect flaws inside large size marble blocks by ultrasound

    OpenAIRE

    Bramanti, Mauro; Bozzi, Edoardo

    1999-01-01

    In stone and marble industry there is considerable interest in the possibility of using ultrasound diagnostic techniques for non-destructive testing of large size blocks in order to detect internal flaws such as faults, cracks and fissures. In this paper some preliminary measurements are reported in order to acquire basic knowledge of the fundamental properties of ultrasound, such as propagation velocity and attenuation, in the media here considered. We then outline a particular diagnostic pr...

  11. Digital Study and Web-based Documentation of the Colour and Gilding on Ancient Marble Artworks

    OpenAIRE

    Siotto, Eliana; Palma, Gianpaolo; Potenziani, Marco; Scopigno, Roberto

    2015-01-01

    Greek and Roman marble artworks have been deeply studied from a typological and stylistic point of view, while there is still a limited knowledge on the pigments, dyes, binders and technical expedients used by Roman artists. In a renewed scientific interest towards the ancient polychromy (colour and gilding), a digital methodological and multidisciplinary approach can provide valuable information to better investigate and understand this fundamental aspect and to get a complete sense on Greek...

  12. The marble head of a statuette from Mediana (excavations in 2001)

    OpenAIRE

    Plemić Bojana

    2013-01-01

    During the archaeological excavations in Mediana in 2001, the head of a marble statuette of exceptional beauty and craftsmanship was discovered. It was an isolated discovery, the sculpture probably having been imported from some Greek artistic centre or an eastern Mediterranean workshop, presenting a part of a larger ensemble of sculptures that had adorned an imperial villa with peristyle. Since the head was found in pieces and being just part of a sculptural representation with no reliable a...

  13. Thermal Analysis, FT-IR Spectroscopy and Optical Microscopy as a Tool for Characterization of Marble

    Czech Academy of Sciences Publication Activity Database

    Plevová, Eva; Kožušníková, Alena; Vaculíková, Lenka

    2009-01-01

    Roč. 5, č. 9 (2009), s. 149-150 ISSN 1336-7242. [Zjazd chemikov /61./. 07.09.2009-11.09.2009, Tatranské Matliare] R&D Projects: GA ČR GP105/07/P416; GA ČR GA105/08/1398 Institutional research plan: CEZ:AV0Z30860518 Keywords : marbles * thermal analysis * thermomechanical analysis Subject RIV: CB - Analytical Chemistry, Separation

  14. Multidisciplinary approaches to radiation-balanced lasers (MARBLE): a MURI program by AFOSR (Conference Presentation)

    Science.gov (United States)

    Sheik-Bahae, Mansoor

    2017-02-01

    An overview of the diverse research activities under the newly funded MURI project by AFOSR will be presented. The main goal is to advance the science of radiation-balanced lasers, also known as athermal lasers, in order to mitigate the thermal degradation of the high-power laser beams. The MARBLE project involves researchers from four universities and spans research activities in rare-earth doped crystals and fibers to semiconductor disc lasers.

  15. Utilization of marble from Bejui mine - Currais Novos/RN in ceramic mass

    International Nuclear Information System (INIS)

    Farias, D.S.U. de; Souza, M.M. de; Almeida, A.B.D. de; Lima, T.C. de; Nobrega, L.F.P. de M.; Mendes, L.B.

    2016-01-01

    Mining in Mine Brejui, in Currais Novos - RN, is related to the extraction of scheelite, however the marble of the region is not fully tapped. Aiming to provide a utility to this carbonate rock very abundant in the Serido region, this work is to evaluate, from its chemical and other tests, the addition of marble in the ceramic mass. For the analysis, the samples were collected, then comminuted and sieved to #200 and, right after, characterized by fluorescence X-ray method (FRX). The results indicate a high concentration of CaO (95%), a flux element, and very low content of Fe_2O_3 and SO_3 (less than 0.6%). After produced the samples, there were performed the water absorption tests and linear shrinkage, which has indicate satisfactory results and classifying them as porcelain. Therefore, with the significant potential of the marble, other laboratory tests may be performed to analyze its incorporation in the formulation of ceramic bodies, being economically viable and adding proper use and commercial value to the rock. (author)

  16. Influence of limestone waste as partial replacement material for sand and marble powder in concrete properties

    Directory of Open Access Journals (Sweden)

    Omar M. Omar

    2012-12-01

    Full Text Available Green concrete are generally composed of recycling materials as hundred or partial percent substitutes for aggregate, cement, and admixture in concrete. Limestone waste is obtained as a by-product during the production of aggregates through the crushing process of rocks in rubble crusher units. Using quarry waste as a substitute of sand in construction materials would resolve the environmental problems caused by the large-scale depletion of the natural sources of river and mining sands. This paper reports the experimental study undertaken to investigate the influence of partial replacement of sand with limestone waste (LSW, with marble powder (M.P as an additive on the concrete properties. The replacement proportion of sand with limestone waste, 25%, 50%, and 75% were practiced in the concrete mixes except in the concrete mix. Besides, proportions of 5%, 10% and 15% marble powder were practiced in the concrete mixes. The effects of limestone waste as fine aggregate on several fresh and hardened properties of the concretes were investigated. The investigation included testing of compressive strength, indirect tensile strength, flexural strength, modulus of elasticity, and permeability. It was found that limestone waste as fine aggregate enhanced the slump test of the fresh concretes. But the unit weight concretes were not affected. However, the good performance was observed when limestone waste as fine aggregate was used in presence of marble powder.

  17. Characterization of Mechanical Properties of Marble sludge/natural rubber composites

    International Nuclear Information System (INIS)

    Bhatti, K.P.

    2012-01-01

    This study aims to investigate the possible utilization of Marble Sludge (MS) in Natural Rubber (NR) composites, which would reduce both the environmental pollution and product cost. Marble waste in the form of sludge is taken from Mangopir Marble industrial area Karachi. The sludge was dried, grinded and passed through desire sieves (20, 37 and 75 micro m) and incorporated in the formulation of NR composites. The physical characteristics of dry MS were carried out in order to identify all components by instrumental techniques. Different micro sized particles of MS (20, 37 and 75 micro-m) were added with different loading (10, 30, 50, 70 and 90 phr). Mechanical properties of MS filled NR composites were studied. It was found that tensile strength and tear strength increased with increasing the MS till 70 phr. Further addition of MS in the composites decreased both strengths. Elongation at break and rebound resilience decreased with increasing MS loading, while modulus, (100%, 200% and 300% elongation), hardness, compression set and abrasion loss increased with increase loading of MS. All mechanical properties of smaller micro size MS particle (20 micro-m) filled NR composites have higher values then 37 and 75 micro-m size particle. The results of mechanical properties after aging show that the tensile strength, modulus, elongation at break and rebound resilience values decreased while hardness, compression set and abrasion loss values increased. (author)

  18. Evaluation of natural radioactivity and radiological hazards caused by different marbles of India

    International Nuclear Information System (INIS)

    Ramasamy, V.; Ponnusamy, V.; Hemalatha, J.; Meenakshisundaram, V.; Gajendiran, V.

    2005-01-01

    The samples used in this study are of various coloured varieties of marbles collected from marble dealers. The specific activity concentration of 238 U, 232 Th and 40 K has been determined by gamma ray spectrometry. The materials showed concentrations of 238 U, 232 Th and 40 K which were found to be dramatically variable depending on mineral content and type of formation. Using FTIR and thin section analyses, quartz, feldspar, calcite and mafic minerals present in the samples have been determined quantitatively. From our experimental data, it can be seen that the geochemical parameters such as SiO 2 or mafic minerals or CaCO 3 may be considered to be an appropriate index to select the marbles of low radiological risk. The average specific activities of 40 K are found to be higher than 232 Th, 238 U. The ratio of Th/U was calculated and correlated. Assessment of radiological hazards was made by calculating radium equivalent activities, external and internal hazard indices which were found to vary from 30.92 to 54.45, 0.08 to 0.14 and 0.10 to 0.17 Bq/kg, respectively. The observed values are lower than the recommended limits. (author)

  19. Torque-Controlled Adaptive Speed Control on a CNC Marble Saw Machine

    Directory of Open Access Journals (Sweden)

    Ugur Simsir

    2015-02-01

    Full Text Available Although CNC marble saw machines can automatically cut marble slabs to desired dimensions, saw speed and feed rate are selected by operator according to stone parameters, features of the saw, and its immersion depth. If the feed rate is selected lower than the optimal value, there will be time-loss and capacity deficiencies or if it is selected faster, cutting quality will decrease, spindle motor will draw more current, and saw blade will corrode faster. While cutting especially thick materials, saw may be stacked in the stone, cutting quality may be impaired, saw blade may be abraded earlier, precision quality may go down because of increase in measurement errors, and machine may be damaged with the increase in vibrations when improper feed rates are selected. Because of nonhomogeneity of the slabs and deterioration of the saw blade, operator cannot determine a persistent feed rate. This study is targeted to find saw speeds according to saw diameter and optimum feed rate by means of limiting vibrations and current drawn from saw motor and torque accordingly in order to increase working performance of CNC marble saw machines. Thanks to adaptive adjustment of feed rate, one can save on material as well as time, labour, and cost by making use of optimum energy.

  20. Cupriavidus metallidurans biomineralization ability and its application as a bioconsolidation enhancer for ornamental marble stone.

    Science.gov (United States)

    Daskalakis, Markos I; Magoulas, Antonis; Kotoulas, Georgios; Katsikis, Ioannis; Bakolas, Asterios; Karageorgis, Aristomenis P; Mavridou, Athena; Doulia, Danae; Rigas, Fotis

    2014-08-01

    Bacterially induced calcium carbonate precipitation of a Cupriavidus metallidurans isolate was investigated to develop an environmentally friendly method for restoration and preservation of ornamental stones. Biomineralization performance was carried out in a growth medium via a Design of Experiments (DoE) approach using, as design factors, the temperature, growth medium concentration, and inoculum concentration. The optimum conditions were determined with the aid of consecutive experiments based on response surface methodology (RSM) and were successfully validated thereafter. Statistical analysis can be utilized as a tool for screening bacterial bioprecipitation as it considerably reduced the experimental time and effort needed for bacterial evaluation. Analytical methods provided an insight to the biomineral characteristics, and sonication tests proved that our isolate could create a solid new layer of vaterite on marble substrate withstanding sonication forces. C. metallidurans ACA-DC 4073 provided a compact vaterite layer on the marble substrate with morphological characteristics that assisted in its differentiation. The latter proved valuable during spraying minimum amount of inoculated media on marble substrate under conditions close to an in situ application. A sufficient and clearly distinguishable layer was identified.

  1. The marble quarries of Macael. From “free and communal” to council property

    International Nuclear Information System (INIS)

    Carretero Gómez, A.; Aznar Sánchez, J.A.

    2017-01-01

    The fate of the inhabitants of Macael has been closely linked to the production of marble from time immemorial. The scope of these resources transcended local borders during the latter part of last century; thus, in the last few years, the marble extracted from the surroundings of Macael accounted for over 40% of the national production, with Spain being one of the leading world producers of this ornamental rock. This paper analyzes the changes that have taken place in the quarry access system since 1573, when the town of Macael was surveyed, up to the present time. After many historical changes in which the people of Macael have had to fight for ownership of the quarries, both against private interests and public administration, the assets which were communal, and therefore freely accessible to the locals, became the property of the Local Council, which at present also holds the exploitation concession of the marble resources and the power to grant leases to entrepreneurs wishing to extract this mineral. [es

  2. Determination of the origin and texture of marble artifacts using stable isotopes

    Science.gov (United States)

    Dotsika, E.; Poutoukis, D.; Zisi, N.; Psomiadis, D.

    2009-04-01

    For the characterization of marble and the identification of the origin of marble artifacts, samples from several ancient monuments of Greece were analyzed using several techniques: stable isotopes of carbonates (13C, 18O), XRD analysis and optical microscopy, from which information can be obtained on the origin and texture of the marble used for the production of the artifacts. The full range of grain sizes and isotopic signatures that occur in a lot of different quarries has been measured and presented. In a δ13C versus δ18O diagram, the fields corresponding to all known ancient quarries (from Penteli, Cyclades, especially Naxos (Mela, Apol, Apir, Senax), Keros, Paros (Parlak, Parlyc) and Asia Minor (Prokon)) are reported. The plots representing the analyzed samples are also shown on the same diagram. The final results of the study indicate the origin of the carbonate material of the artefacts from each of the ancient monument. In cases that the samples plot on overlapping areas, a further study is proposed, using the maximum grain size of the material.

  3. Synthetic Polymers at Interfaces: Monodisperse Emulsions Multiple Emulsions and Liquid Marbles

    Science.gov (United States)

    Sun, Guanqing

    The adsorption of polymeric materials at interfaces is an energetically favorable process which is investigated in much diversified fields, such as emulsions, bubbles, foams, liquid marbles. Pickering emulsion, which is emulsion stabilized by solid particles has been investigated for over one century and preparation of Pickering emulsion with narrow size distribution is crucial for both the theoretical study of the stabilization mechanism and practical application, such as templated fabrication of colloidosomes. The precise control over the size and functionality of polymer latices allows the preparation of monodisperse Pickering emulsions with desired sizes through SPG membrane emulsification at rather rapid rate compared to microfludic production. Double or multiple emulsions have long been investigated but its rapid destabilization has always been a major obstacle in applying them into practical applications. The modern living polymerization techniques allow us to prepare polymers with designed structure of block copolymers which makes it possible to prepare ultra-stable multiple emulsions. The precise tuning of the ratio of hydrophobic part over the hydrophilic can unveil the stabilization mechanism. Liquid marble is a new type of materials of which liquid droplets are coated by dry particles. The coating of an outer layer of dry particles renders the liquid droplets non-sticky at solid surface which is useful in transportation of small amount of liquid without leakage at extreme low friction force. The property of liquid marbles relies largely on the stabilizers and the drying condition of polymeric latices is shown to have great influence on the property of liquid marbles. Firstly, an introduction to the interfacial and colloidal science with special attention to topics on emulsions, multiple emulsion and liquid marbles is given in Chapter 1. The unique features of an interface and a discussion on the definition of colloids are introduced prior to the

  4. Petrographic characterization and provenance determination of the white marbles used in the Roman sculptures of Forum Sempronii (Fossombrone, Marche, Italy)

    Science.gov (United States)

    Antonelli, Fabrizio; Columbu, Stefano; Lezzerini, Marco; Miriello, Domenico

    2014-06-01

    The Roman municipium of Forum Sempronii (Fossombrone, Marche) was located along the `Via Consolare Flaminia', in the stretch of road where it ran along the final sector of the valley of the River Metauro ( Mataurus). The ancient colony of Forum Sempronii, which is cited by Strabo, Pliny, and Ptolemy, was found in the second century BC, probably on the site of an earlier community and its activity continued until the end of the fifth century AD. During ancient and more recent archaeological excavations, many fragments of coloured stones and marbles, and some white marble sculptures have been unearthed. In this paper, we report the results of the provenance identification of the white marbles used for the sculptures found in the archaeological site of Forum Sempronii and now displayed at the local archaeological museum. The determination of the source origin of the white marbles used for the sculptures has been established by mineralogical-petrographic and geochemical analyses. Microscopic study of thin sections together with carbon and oxygen stable isotope ratios indicate that more than one type of white marbles was used: Pentelikon, Lunense, and Thasian.

  5. The Underwater Recovery of Monumental Marble Column Drums from an Ancient Shipwreck at Kızılburun, Turkey

    Science.gov (United States)

    Carlson, Deborah N.

    2016-08-01

    In the first century B.C., a stone carrier sank off the Aegean coast of Turkey at Kızılburun transporting all the elements of a monumental marble column, including a single Doric capital and eight drums. The 60-tonne cargo lay at a depth of 45-48 m and was excavated in its entirety by the Institute of Nautical Archaeology at Texas A&M University between 2005 and 2011. Ongoing research has shown that the Doric column pieces in the Kızılburun cargo originated in the marble quarries on Proconnesus Island in the Sea of Marmara and were very likely heading for the Temple of Apollo at Claros when the ship sank just 50 km short of its destination. The complete recovery of the ship's cargo posed a unique set of methodological challenges involving lifting the multi-tonne marble drums without disturbing the delicate waterlogged wooden hull remains preserved beneath. This report summarizes the solutions developed over five seasons in order to rig, hoist, move, and ultimately raise to the surface eight large ancient marble column drums (as well as all the other marble artifacts in the cargo) from a depth of almost 50 m under water.

  6. Reconnaissance investigation of high-calcium marble in the Beaver Creek area, St. Lawrence County, New York

    Science.gov (United States)

    Brown, C. Ervin

    1978-01-01

    Three belts of marble of the Grenville Series were mapped in the Beaver Creek drainage basin, St. Lawrence County, N.Y. One of these, on the west side of Beaver Creek, consists of coarsely crystalline pure calcitic marble that occurs in a zone at least 10 by 0.8 km in extent. Samples of marble show CaCO3 content to be greater than 93 percent, and some samples contain greater than 96 percent, and only small amounts of MgO and Fe203 are present. Marble in two other belts to the east of Beaver Creek are variable in composition, but locally have high content of calcium carbonate material. The marble deposit west of Beaver Creek has a chemical composition favorable for specialized chemical, industrial, and metallurgical uses. Another favorable aspect of the deposit is its proximity to inexpensive water transportation on the St. Lawrence Seaway only 27.5 km away by road, at Ogdensburg, N.Y.

  7. Constraints on the depositional age and tectonometamorphic evolution of marbles from the Biharia Nappe System (Apuseni Mountains, Romania

    Directory of Open Access Journals (Sweden)

    Reiser Martin Kaspar

    2017-04-01

    Full Text Available Basement rocks from the Biharia Nappe System in the Apuseni Mountains comprise several dolomite and calcite marble sequences or lenses which experienced deformation and metamorphic overprint during the Alpine orogeny. New Sr, O and C-isotope data in combination with considerations from the lithological sequences indicate Middle to Late Triassic deposition of calcite marbles from the Vulturese-Belioara Series (Biharia Nappe s.str.. Ductile deformation and large-scale folding of the siliciclastic and carbonatic lithologies is attributed to NW-directed nappe stacking during late Early Cretaceous times (D2. The studied marble sequences experienced a metamorphic overprint under lower greenschist- facies conditions (316-370 °C based on calcite - dolomite geothermometry during this tectonic event. Other marble sequences from the Biharia Nappe System (i.e. Vidolm and Baia de Arieș nappes show similarities in the stratigraphic sequence and their isotope signature, together with a comparable structural position close to nappe contact. However, the dataset is not concise enough to allow for a definitive attribution of a Mesozoic origin to other marble sequences than the Vulturese-Belioara Series.

  8. Testing the effectiveness of automated acoustic sensors for monitoring vocal activity of Marbled Murrelets Brachyramphus marmoratus

    Science.gov (United States)

    Cragg, Jenna L.; Burger, Alan E.; Piatt, John F.

    2015-01-01

    Cryptic nest sites and secretive breeding behavior make population estimates and monitoring of Marbled Murrelets Brachyramphus marmoratus difficult and expensive. Standard audio-visual and radar protocols have been refined but require intensive field time by trained personnel. We examined the detection range of automated sound recorders (Song Meters; Wildlife Acoustics Inc.) and the reliability of automated recognition models (“recognizers”) for identifying and quantifying Marbled Murrelet vocalizations during the 2011 and 2012 breeding seasons at Kodiak Island, Alaska. The detection range of murrelet calls by Song Meters was estimated to be 60 m. Recognizers detected 20 632 murrelet calls (keer and keheer) from a sample of 268 h of recordings, yielding 5 870 call series, which compared favorably with human scanning of spectrograms (on average detecting 95% of the number of call series identified by a human observer, but not necessarily the same call series). The false-negative rate (percentage of murrelet call series that the recognizers failed to detect) was 32%, mainly involving weak calls and short call series. False-positives (other sounds included by recognizers as murrelet calls) were primarily due to complex songs of other bird species, wind and rain. False-positives were lower in forest nesting habitat (48%) and highest in shrubby vegetation where calls of other birds were common (97%–99%). Acoustic recorders tracked spatial and seasonal trends in vocal activity, with higher call detections in high-quality forested habitat and during late July/early August. Automated acoustic monitoring of Marbled Murrelet calls could provide cost-effective, valuable information for assessing habitat use and temporal and spatial trends in nesting activity; reliability is dependent on careful placement of sensors to minimize false-positives and on prudent application of digital recognizers with visual checking of spectrograms.

  9. Utilization of Integrated Geophysical Techniques to Delineate the Extraction of Mining Bench of Ornamental Rocks (Marble

    Directory of Open Access Journals (Sweden)

    Julián Martínez

    2017-12-01

    Full Text Available Low yields in ornamental rock mining remain one of the most important problems in this industry. This fact is usually associated with the presence of anisotropies in the rock, which makes it difficult to extract the blocks. An optimised planning of the exploitation, together with an improved geological understanding of the deposit, could increase these yields. In this work, marble mining in Macael (Spain was studied to test the capacity of non-destructive geophysical prospecting methods (GPR and ERI as tools to characterize the geology of the deposit. It is well-known that the ERI method provides a greater penetration depth. By using this technique, it is possible to distinguish the boundaries between the marble and the underlying micaschists, the morphology of the unit to be exploited, and even fracture zones to be identified. Therefore, this technique could be used in the early stages of research, to estimate the reserves of the deposit. The GPR methodology, with a lower penetration depth, is able to offer more detailed information. Specifically, it detects lateral and vertical changes of the facies inside the marble unit, as well as the anisotropies of the rock (fractures or holes. This technique would be suitable for use in a second stage of research. On the one hand, it is very useful for characterization of the texture and fabric of the rock, which allows us to determine in advance its properties, and therefore, the quality for ornamental use. On the other hand, the localization of anisotropy using the GPR technique will make it possible to improve the planning of the rock exploitation in order to increase yields. Both integrated geophysical techniques are effective for assessing the quality of ornamental rock and thus can serve as useful tools in mine planning to improve yields and costs.

  10. Northwest Forest Plan—the first 10 years (1994-2003): status and trends of populations and nesting habitat for the marbled murrelet.

    Science.gov (United States)

    Mark H. Huff; Martin G. Raphael; Sherri L. Miller; S. Kim Nelson; Jim Baldwin

    2006-01-01

    The Northwest Forest Plan (the Plan) is a large-scale ecosystem management plan for federal land in the Pacific Northwest. Marbled murrelet (Brachyramphus marmoratus) populations and habitat were monitored to evaluate effectiveness of the Plan. The chapters in this volume summarize information on marbled murrelet ecology and present the monitoring...

  11. 78 FR 37586 - Stone Age Interiors, Inc., D/B/A Colorado Springs Marble and Granite, Including On-Site Leased...

    Science.gov (United States)

    2013-06-21

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-82,440] Stone Age Interiors, Inc., D/B/A Colorado Springs Marble and Granite, Including On-Site Leased Workers From Express Employment... Marble and Granite, Colorado Springs, Colorado (subject firm). The negative determination was issued on...

  12. Thin-section microscopy of decayed crystalline marble from the garden sculptures of Schoenbrunn Palace in Vienna

    International Nuclear Information System (INIS)

    Weber, J.; Beseler, S.; Sterflinger, K.

    2007-01-01

    Sterzing marble, a crystalline white marble used in the late-Baroque garden sculptures of Schoenbrunn Palace in Vienna, was studied by means of thin-section and scanning electron microscopy in order to obtain a better understanding of its surface decay caused by atmospheric weathering. Following the classification of distinct phenomena of deterioration by visual on-site inspection, the microstructural features including surface erosion, micro-cracking, soiling, black crust formation, and microbiological infestation are exemplified by microscopical images and are briefly discussed. The results proved useful for evaluating and understanding the various types of marble decay for creating a safer basis for establishing the procedural principles aimed at conservation and maintenance of the sculptures

  13. Investigating the effect of using granite and marble as a building material on the radiation exposure of humans

    International Nuclear Information System (INIS)

    Ebaid, Y. Y.; Bakr, W. F.

    2012-01-01

    The aim of this study was to comprehensively study the radiological hazards of granite and marble used as a building material in Egypt. The activity concentrations of 226 Ra, 232 Th and 40 K were determined using high-resolution hyper-pure germanium detectors in 25 samples of different types of commercially available granite and marble. The measured activity concentrations for these natural radionuclides were compared with the reported data for Egypt and other countries. In order to assess the radiological impact, the radiation hazard parameters such as radium equivalent activity (Ra eq ) and hazard level index (γ) were calculated. The internal and external dose rates due to natural radionuclides in granite and marble were also calculated. The data obtained were considered as helpful in regulating the use of building materials in Egypt. (authors)

  14. Study of the incorporation of marble and granite wastes in the raw material to produce glass wool

    International Nuclear Information System (INIS)

    Rodrigues, Girley Ferreira; Junca, Eduardo; Telles, Victor Bridi; Espinosa, Denise Crocce Romano; Tenorio, Jorge Alberto Soares; Alves, Joner Oliveira

    2010-01-01

    The study aimed to characterize materials obtained from the melted mixture containing marble and granite wastes, and also chemical reagents. Using the characterization results was defined the feasibility of reuse of the marble and granite wastes, through the incorporation in the raw material to produce glass wool (a material with great consumer market as thermo-acoustic insulator). The batch was poured in a water-filled recipient and also in a Herty viscometer at temperatures of 1400, 1450 and 1500 °C. Samples of produced materials were characterized by morphology using Scanning Electron Microscopy, by atomic structure using X-ray Diffraction, and by thermal behavior using Differential Thermal Analysis. The total amount of marble and granite wastes can reach about 79% replacement in relation to the total weight of the raw material used in the glass wool production. (author)

  15. Bone scan and SPECT/CT findings in marble bone disease

    Energy Technology Data Exchange (ETDEWEB)

    Kapoor, Jiten; Joshi, Prathamesh; Lele, Vikram [Jaslok Hospital and Research Centre, Woril (India)

    2012-03-15

    Marble bone disease or osteopetrosis, is a rare inborn disorder characterized by the failure of osteoclasts to resorb bone. Overall incidence of the disease is estimated to be 1 case in 100,000-500,000 population. Whereas the radiographic features of the disease are well known, information on bone scan imaging is sparse in the literature. We present technitium 99m methylene diphosphonate ({sup 99m}Tc MDP) bone scan features of osteopetrosis, along with single photon emission computed tomography-computed tomography(SPECT/CT) correlation in a young male.

  16. Chemical Resistance of Ornamental Compound Stone Produced with Marble Waste and Unsaturated Polyester

    Science.gov (United States)

    Ribeiro, Carlos E. Gomes; Rodriguez, Rubén J. Sánchez; Vieira, Carlos M. Fontes

    Ornamental compound stone are produced by industry for decades, however, few published studies describe these materials. Brazil has many deposits of stone wastes and a big potential to produce these materials. This work aims to evaluate the chemical resistance of ornamental compound stones produced with marble waste and unsaturated polyester. An adaptation of Annex H of ABNT NBR 13818:97 standard, with reagents commonly used in household products, was used. The results were compared with those obtained for natural stone used in composite production.

  17. L'Innocenza Perduta (Lost Innocence: Conserving a Carrara Marble Statue

    Directory of Open Access Journals (Sweden)

    Chris Cleere

    1997-05-01

    Full Text Available This paper describes the conservation of 'L'Innocenza Perduta (Lost Innocence', a marble statue by the Florentine sculptor Emilio Santarelli. As the statue is on open display at University College London and is accessible to the public, it has been vulnerable to destructive elements, including airborne pollutants and vandalism. Cleaning was done by steam and poultice. However, during the cleaning process it became clear that the capital and plinth required more complicated conservation treatments due to considerable cracking of the stone.

  18. Pathogenic fungus Batrachochytrium dendrobatidis in marbled water frog Telmatobius marmoratus: first record from Lake Titicaca, Bolivia.

    Science.gov (United States)

    Cossel, John; Lindquist, Erik; Craig, Heather; Luthman, Kyle

    2014-11-13

    The pathogenic fungus Batrachochytrium dendrobatidis (Bd) has been associated with amphibian declines worldwide but has not been well-studied among Critically Endangered amphibian species in Bolivia. We sampled free-living marbled water frogs Telmatobius marmoratus (Anura: Leptodactylidae) from Isla del Sol, Bolivia, for Bd using skin swabs and quantitative polymerase chain reactions. We detected Bd on 44% of T. marmoratus sampled. This is the first record of Bd in amphibians from waters associated with Lake Titicaca, Bolivia. These results further confirm the presence of Bd in Bolivia and substantiate the potential threat of this pathogen to the Critically Endangered, sympatric Titicaca water frog T. culeus and other Andean amphibians.

  19. Bone scan and SPECT/CT findings in marble bone disease

    International Nuclear Information System (INIS)

    Kapoor, Jiten; Joshi, Prathamesh; Lele, Vikram

    2012-01-01

    Marble bone disease or osteopetrosis, is a rare inborn disorder characterized by the failure of osteoclasts to resorb bone. Overall incidence of the disease is estimated to be 1 case in 100,000-500,000 population. Whereas the radiographic features of the disease are well known, information on bone scan imaging is sparse in the literature. We present technitium 99m methylene diphosphonate ( 99m Tc MDP) bone scan features of osteopetrosis, along with single photon emission computed tomography-computed tomography(SPECT/CT) correlation in a young male.

  20. Using acoustic emissions to enhance fracture toughness calculations for CCNBD marble specimens

    Directory of Open Access Journals (Sweden)

    K. Kaklis

    2017-04-01

    Full Text Available Rock fracture mechanics has been widely applied to blasting, hydraulic fracturing, mechanical fragmentation, rock slope analysis, geophysics, earthquake mechanics and many other science and technology fields. Development of failure in brittle materials is associated with microcracks, which release energy in the form of elastic waves called acoustic emissions. In the present study, acoustic emission (AE measurements were carried out during cracked chevron notched Brazilian disc (CCNBD tests on Nestos marble specimens. The fracture toughness of different modes of loading (mode-I and –II is calculated and the results are discussed in conjunction with the AE parameters.

  1. Characterization of the main types of marble extracted in the area of Macael (Almeria, southeastern Spain) and its historical importance

    International Nuclear Information System (INIS)

    Navarro, R.; Cruz, A.S.; Arriaga, L.; Baltuille, J.M.

    2017-01-01

    The marble from Macael is one of the most important ornamental stones found in Spain. It has been used not only as a building material but also as a decorative element, especially the type nown as “White Macael “. There is evidence of its use dating back over 4000 years. One of the most prominent examples is the Courtyard of the Lions in the Alhambra (Granada), but it is also possible to see some eleme Its in the Roman amphitheatre of Mérida (Badajoz), in Italica (Sevilla), in the palace of Medina Azahara (Córdoba) and in the Royal Palace of Madrid, amongst dozens of palaces and churches throughout the country. In this study we describe the use that this material has had throughout history and the main features and properties of the different varieties of “White Macael”, “Grey Macael”, “Anasol” (calcite marbles) and “Yellow Macael” (dolomitic marbles). They all have mineralogical, physical and mechanical features that make them suitable for almost all uses. Calcite marbles have porosity, absorption and density values lower than dolomite marbles, whilst the latter have more resistance to compression, similar flexural strength under concentrated load, and lower resistance to breaking load at dowel hole than the calcitic marbles. The values of abrasion resistance are also better in the dolomite marbles, whilst the slip resistance is similar in all cases. As far as decay is concerned, the dolomitic marbles, with the exception of the variety Amarillo Triana, suffer more in the frost resistance test but less by the action of salts, with the exception of the White Macael Rio (calcitic) which is the variety that has less alteration. Regarding the status of the stone sector in the region, it is noteworthy that, despite a 60% drop in sales in the domestic market, exports in 2012 increased by 49 % compared to the previous year. The data we present provides increased knowledge of one of the most common building materials in our country with the aim of

  2. A sand budget for Marble Canyon, Arizona: implications for long-term monitoring of sand storage change

    Science.gov (United States)

    Grams, Paul E.

    2013-01-01

    Recent U.S. Geological Survey research is providing important insights into how best to monitor changes in the amount of tributary-derived sand stored on the bed of the Colorado River and in eddies in Marble Canyon, Arizona. Before the construction of Glen Canyon Dam and other dams upstream, sandbars in Glen, Marble, and Grand Canyons were replenished each year by sediment-rich floods. Sand input into the Colorado River is crucial to protecting endangered native fish, animals, and plants and cultural and recreational resources along the river in Glen Canyon National Recreation Area and Grand Canyon National Park.

  3. Medieval glass from the Cathedral in Paderborn: a comparative study using X-ray absorption spectroscopy, X-ray fluorescence, and inductively coupled laser ablation mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Hormes, J. [University of Saskatchewan, Canadian Light Source Inc., Saskatoon, SK (Canada); Louisiana State University, CAMD, Baton Rouge, LA (United States); Roy, A.; Bovenkamp, G.L. [Louisiana State University, CAMD, Baton Rouge, LA (United States); Simon, K. [University of Goettingen, Geochemistry, Centre for Geosciences, Goettingen (Germany); Kim, C.Y. [University of Saskatchewan, Canadian Light Source Inc., Saskatoon, SK (Canada); Boerste, N. [Faculty for Theology Paderborn, Paderborn (Germany); Gai, S. [LWL - Archaeologie fuer Westfalen, Muenster (Germany)

    2013-04-15

    We have investigated four stained glass samples recovered from an archaeological excavation at the Cathedral in Paderborn (Germany) between 1978 and 1980. On two of the samples there are parts of paintings. Concentrations of major elements were determined using two independent techniques: LA-ICP-MS (a UV laser ablation microsampler combined with an inductively coupled plasma mass spectrometer) and synchrotron radiation X-ray excited X-ray fluorescence (SR-XRF). The SR-XRF data were quantified by using the program package PyMCA developed by the software group of the ESRF in Grenoble. Significant differences were found between the concentrations determined by the two techniques that can be explained by concentration gradients near the surface of the glasses caused, for example, by corrosion/leaching processes and the different surface sensitivities of the applied techniques. For several of the elements that were detected in the glass and in the colour pigments used for the paintings X-ray absorption near edge structure (XANES) spectra were recorded in order to determine the chemical speciation of the elements of interest. As was expected, most elements in the glass were found as oxides in their most stable form. Two notable exceptions were observed: titanium was not found as rutile - the most stable form of TiO{sub 2} - but in the form of anatase, and lead was not found in one defined chemical state but as a complex mixture of oxide, sulphate, and other compounds. (orig.)

  4. Long-Term Monitoring of Fresco Paintings in the Cathedral of Valencia (Spain) Through Humidity and Temperature Sensors in Various Locations for Preventive Conservation

    Science.gov (United States)

    Zarzo, Manuel; Fernández-Navajas, Angel; García-Diego, Fernando-Juan

    2011-01-01

    We describe the performance of a microclimate monitoring system that was implemented for the preventive conservation of the Renaissance frescoes in the apse vault of the Cathedral of Valencia, that were restored in 2006. This system comprises 29 relative humidity (RH) and temperature sensors: 10 of them inserted into the plaster layer supporting the fresco paintings, 10 sensors in the walls close to the frescoes and nine sensors measuring the indoor microclimate at different points of the vault. Principal component analysis was applied to RH data recorded in 2007. The analysis was repeated with data collected in 2008 and 2010. The resulting loading plots revealed that the similarities and dissimilarities among sensors were approximately maintained along the three years. A physical interpretation was provided for the first and second principal components. Interestingly, sensors recording the highest RH values correspond to zones where humidity problems are causing formation of efflorescence. Recorded data of RH and temperature are discussed according to Italian Standard UNI 10829 (1999). PMID:22164100

  5. Long-Term Monitoring of Fresco Paintings in the Cathedral of Valencia (Spain Through Humidity and Temperature Sensors in Various Locations for Preventive Conservation

    Directory of Open Access Journals (Sweden)

    Angel Fernández-Navajas

    2011-09-01

    Full Text Available We describe the performance of a microclimate monitoring system that was implemented for the preventive conservation of the Renaissance frescoes in the apse vault of the Cathedral of Valencia, that were restored in 2006. This system comprises 29 relative humidity (RH and temperature sensors: 10 of them inserted into the plaster layer supporting the fresco paintings, 10 sensors in the walls close to the frescoes and nine sensors measuring the indoor microclimate at different points of the vault. Principal component analysis was applied to RH data recorded in 2007. The analysis was repeated with data collected in 2008 and 2010. The resulting loading plots revealed that the similarities and dissimilarities among sensors were approximately maintained along the three years. A physical interpretation was provided for the first and second principal components. Interestingly, sensors recording the highest RH values correspond to zones where humidity problems are causing formation of efflorescence. Recorded data of RH and temperature are discussed according to Italian Standard UNI 10829 (1999.

  6. Status review of the Marbled Murrelet (Brachyramphus marmoratus) in Alaska and British Columbia

    Science.gov (United States)

    Piatt, John F.; Kuletz, K.J.; Burger, A.E.; Hatch, Shyla A.; Friesen, Vicki L.; Birt, T.P.; Arimitsu, Mayumi L.; Drew, G.S.; Harding, A.M.A.; Bixler, K.S.

    2007-01-01

    The Marbled Murrelet (Brachyramphus marmoratus) is a small, diving seabird inhabiting inshore waters of the Northeastern Pacific Ocean. This species feeds on small, schooling fishes and zooplankton, and nests primarily on the moss-covered branches of large, old-growth conifers, and also, in some parts of its range, on the ground. We reviewed existing information on this species to evaluate its current status in the northern part of its range-Alaska (U.S.) and British Columbia (Canada). Within the southern part of its range (Washington, Oregon, and California, U.S.), the Marbled Murrelet was listed as a threatened species under the Endangered Species Act (ESA) in 1993, and the U.S. Fish and Wildlife Service (USFWS) needed information on the species throughout its range for ESA deliberations. We compiled published information on the conservation status, population biology, foraging ecology, population genetics, population status and trends, demography, marine and nesting habitat characteristics, threats, and ongoing conservation efforts for Marbled Murrelets in Alaska and British Columbia. We conducted a new genetic study using samples from a segment of the range that had not been included in previous studies (Washington, Oregon) and additional nuclear intron and microsatellite markers. We also analyzed available at-sea survey data from several locations for trend. To understand the reasonableness of the empirical trend data, we developed demographic models incorporating stochasticity to discern what population trends were possible by chance. The genetic studies substantially confirmed previous findings on population structure in the Marbled Murrelet. Our present work finds three populations: (1) one comprising birds in the central and western Aleutian Islands; (2) one comprising birds in central California; and (3) one comprising birds within the center of the range from the eastern Aleutians to northern California. Our knowledge of genetic structure within this

  7. Comparative study of pulsed laser cleaning applied to weathered marble surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, P., E-mail: mportcal@upo.es [Department of Physical, Chemical and Natural Systems, Universidad Pablo de Olavide, 41013 Seville (Spain); Antúnez, V.; Ortiz, R.; Martín, J.M. [Department of Physical, Chemical and Natural Systems, Universidad Pablo de Olavide, 41013 Seville (Spain); Gómez, M.A. [Instituto Andaluz de Patrimonio Histórico, Camino de los Descubrimientos s/n, 41092 Seville (Spain); Hortal, A.R.; Martínez-Haya, B. [Department of Physical, Chemical and Natural Systems, Universidad Pablo de Olavide, 41013 Seville (Spain)

    2013-10-15

    The removal of unwanted matter from surface stones is a demanding task in the conservation of cultural heritage. This paper investigates the effectiveness of near-infrared (IR) and ultraviolet (UV) laser pulses for the cleaning of surface deposits, iron oxide stains and different types of graffiti (black, red and green sprays and markers, and black cutting-edge ink) on dolomitic white marble. The performance of the laser techniques is compared to common cleaning methods on the same samples, namely pressurized water and chemical treatments. The degree of cleaning achieved with each technique is assessed by means of colorimetric measurements and X-ray microfluorescence. Eventual morphological changes induced on the marble substrate are monitored with optical and electronic microscopy. It is found that UV pulsed laser ablation at 266 nm manages to clean all the stains except the cutting-edge ink, although some degree of surface erosion is produced. The IR laser pulses at 1064 nm can remove surface deposits and black spray acceptably, but a yellowing is observed on the stone surface after treatment. An economic evaluation shows that pulsed laser cleaning techniques are advantageous for the rapid cleaning of small or inaccessible surface areas, although their extensive application becomes expensive due to the long operating times required.

  8. Structural analysis of sheath folds in the Sylacauga Marble Group, Talladega slate belt, southern Appalachians

    Science.gov (United States)

    Mies, J.W.

    1993-01-01

    Remnant blocks of marble from the Moretti-Harrah dimension-stone quarry provide excellent exposure of meter-scale sheath folds. Tubular structures with elliptical cross-sections (4 ???Ryz ??? 5) are the most common expression of the folds. The tubes are elongate subparallel to stretching lineation and are defined by centimeter-scale layers of schist. Eccentrically nested elliptical patterns and opposing asymmetry of folds ('S' and 'Z') are consistent with the sheath-fold interpretation. Sheath folds are locally numerous in the Moretti-Harrah quarry but are not widely distributed in the Sylacauga Marble Group; reconnaissance in neighboring quarries provided no additional observations. The presence of sheath folds in part of the Talladega slate belt indicates a local history of plastic, non-coaxial deformation. Such a history of deformation is substantiated by petrographic study of an extracted hinge from the Moretti-Harrah quarry. The sheath folds are modeled as due to passive amplification of initial structures during simple shear, using both analytic geometry and graphic simulation. As indicated by these models, relatively large shear strains (y ??? 9) and longitudinal initial structures are required. The shear strain presumably relates to NW-directed displacement of overlying crystalline rocks during late Paleozoic orogeny. ?? 1993.

  9. Comparative study of pulsed laser cleaning applied to weathered marble surfaces

    International Nuclear Information System (INIS)

    Ortiz, P.; Antúnez, V.; Ortiz, R.; Martín, J.M.; Gómez, M.A.; Hortal, A.R.; Martínez-Haya, B.

    2013-01-01

    The removal of unwanted matter from surface stones is a demanding task in the conservation of cultural heritage. This paper investigates the effectiveness of near-infrared (IR) and ultraviolet (UV) laser pulses for the cleaning of surface deposits, iron oxide stains and different types of graffiti (black, red and green sprays and markers, and black cutting-edge ink) on dolomitic white marble. The performance of the laser techniques is compared to common cleaning methods on the same samples, namely pressurized water and chemical treatments. The degree of cleaning achieved with each technique is assessed by means of colorimetric measurements and X-ray microfluorescence. Eventual morphological changes induced on the marble substrate are monitored with optical and electronic microscopy. It is found that UV pulsed laser ablation at 266 nm manages to clean all the stains except the cutting-edge ink, although some degree of surface erosion is produced. The IR laser pulses at 1064 nm can remove surface deposits and black spray acceptably, but a yellowing is observed on the stone surface after treatment. An economic evaluation shows that pulsed laser cleaning techniques are advantageous for the rapid cleaning of small or inaccessible surface areas, although their extensive application becomes expensive due to the long operating times required.

  10. Application of preliminary risk analysis at marble finishing plants in Recife's metropolitan area.

    Science.gov (United States)

    de Melo Neto, Rútilo P; Kohlman Rabbani, Emilia R

    2012-01-01

    The finishing of marble occurs in quarries all over Brazil, being the most significant dimension of the ornamental stone sector, with 7,000 businesses. Recife's Metropolitan Area (RMR) contains approximately 106 marble quarries, 25 of them unionized. The study focused on the application of Preliminary Risk Analysis, conducted at two unionized quarries: M1, a small business; and the second, M2, considered a micro enterprise. In this analysis both the administrative and the productive sectors were evaluated. The fieldwork was done in the month of December 2010. The study revealed that the two quarries carried moderate risks in the administrative sector, mainly due to ergonomic factors, and that in the productive sectors the risks were high, specifically because of excess noise, dust material, and precarious electrical installations. Using the results of the qualitative analysis as a base, the need for quantitative study presents itself in order to determine the most adequate modes of protection to be of assistance in the management of these risks, guaranteeing the safety and health of the worker and consequently the improvement in productivity in this sector.

  11. Comparative study of pulsed laser cleaning applied to weathered marble surfaces

    Science.gov (United States)

    Ortiz, P.; Antúnez, V.; Ortiz, R.; Martín, J. M.; Gómez, M. A.; Hortal, A. R.; Martínez-Haya, B.

    2013-10-01

    The removal of unwanted matter from surface stones is a demanding task in the conservation of cultural heritage. This paper investigates the effectiveness of near-infrared (IR) and ultraviolet (UV) laser pulses for the cleaning of surface deposits, iron oxide stains and different types of graffiti (black, red and green sprays and markers, and black cutting-edge ink) on dolomitic white marble. The performance of the laser techniques is compared to common cleaning methods on the same samples, namely pressurized water and chemical treatments. The degree of cleaning achieved with each technique is assessed by means of colorimetric measurements and X-ray microfluorescence. Eventual morphological changes induced on the marble substrate are monitored with optical and electronic microscopy. It is found that UV pulsed laser ablation at 266 nm manages to clean all the stains except the cutting-edge ink, although some degree of surface erosion is produced. The IR laser pulses at 1064 nm can remove surface deposits and black spray acceptably, but a yellowing is observed on the stone surface after treatment. An economic evaluation shows that pulsed laser cleaning techniques are advantageous for the rapid cleaning of small or inaccessible surface areas, although their extensive application becomes expensive due to the long operating times required.

  12. Deciphering the social structure of Marbled Murrelets from behavioral observations at sea

    Science.gov (United States)

    Speckman, Suzann G.; Piatt, John F.; Springer, Alan M.

    2003-01-01

    We surveyed Marbled Murrelets (Brachyramphus marmoratus) daily from small boats in Auke Bay and Fritz Cove, Alaska, from May through August 1992 and 1993. Differences in numbers of juveniles and in the timing of their presence in the study area between the two years indicated that breeding phenology was late and productivity was low in 1992 compared to 1993. This difference was consistent with variability in the physical environment. Of 99 fish identified in the bills of fish-holding adult murrelets, 81 (82%) were Pacific Sand Lance (Ammodytes hexapterus). Counts of fish-holding adult murrelets were significantly higher in the evening than at any other time of day. Time of day had no significant effects on counts of fledglings, indicating that juveniles were moving into and out of the study area during the day. Murrelets were predominantly found in groups of two or more, even during incubation, suggesting that murrelets incur an appreciable benefit, such as increased foraging efficiency, from foraging in groups. For both summers, there was no correlation between counts of murrelets on the water and numbers of murrelet detections in the adjacent forest. We suggest that many behavior patterns of the Marbled Murrelet (displaying, choosing of mates, and pair-bonding, finding of nest sites and successful foraging of juveniles) may be socially facilitated.

  13. SINGLE NUCLEOTIDE POLYMORPHISMS OF LIPOPROTEIN LIPASE GENE AND ITS ASSOCIATION WITH MARBLING QUALITY IN LOCAL SHEEPS

    Directory of Open Access Journals (Sweden)

    H. Hidayati

    2015-09-01

    Full Text Available Lipoprotein lipase (LPL is a key enzyme that plays in metabolism and transport lipoprotein andtherefore has an influence on blood triglyceride levels. LPL controls triacylglycerol partitioning betweenadipose tissue and muscle that increases fat storage or provides energy in the form of fatty acids formuscle growth. The research was aimed to explore Single Nucleotide Polymorphisms of LPL gene andto associate SNP with marbling quality. A total of 66 genomic DNAs consisted of sumatera thin-tail edsheep (50 heads and garut sheep (16 heads were used in this study. Polymerase Chain Reaction wasused to amplify genomic DNA and direct sequencing method was to identify polymorphism sequences.The sequences were analyzed with Bio Edit and MEGA 5.2. The BLAST sequence was obtained fromgene bank X.68308.1. The association between the genotype and marbling quality was analyze by oneway ANOVA and further between mean differences were tested using least sgnificant difference. Theresults showed that 3 novel SNPs i.e. insertion g.26>C; insertion g.27> G and c.192T>C on garut sheepand a SNP insertion g.26>C/G on sumatera thin-tail ed sheep. The diversity of LPL gene at c.192T>Cwas associated with heneicosanoic acid, whereas TT genotype (0.04% was higher than CC (0.03% andCT (0.02%.

  14. Carbon isotope geothermometry of graphite-bearing marbles from Central Dronning Maud Land, East Antarctica

    International Nuclear Information System (INIS)

    Wand, U.; Muehle, K.

    1988-01-01

    In order to estimate the peak metamorphic temperatures in high-grade regional metamorphic marbles from central Dronning Maud Land (East Antarctica), 13 C/ 12 C isotope ratios have been measured for coexisting carbonate and graphite pairs. The δ 13 C values of carbonates (calcite ± dolomite) and graphite vary from -0.1 to +4.6 permill (PDB) and from -3.3 to +1.7 permill, respectively. The isotopic fractionation between carbonate and graphite ranges from 2.9 to 4.0 permill and is similar to the Δ 13 C (carb-gr) values observed in other East Antarctic and non-Antarctic granulite-facies marbles. The metamorphic temperatures calculated using the equation of VALLEY and O'NEIL (1981) for calcite-graphite pairs are predominantly in the range 700 0 - 800 0 C (x n=5 ± s = 730 0 ± 30 0 C) and agree well with metamorphic temperatures derived from mineral chemical studies in this East Antarctic region. (author)

  15. Marbled Murrelets Select Distinctive Nest Trees within Old-Growth Forest Patches

    Directory of Open Access Journals (Sweden)

    Michael P. Silvergieter

    2011-12-01

    Full Text Available The coastal old-growth forests of North America's Pacific Coast are renowned both for their commercial and ecological value. This study adds to growing evidence that selective harvesting of the largest trees may have a disproportionate ecological impact. Marbled Murrelets (Brachyramphus marmoratus, a threatened species, nest almost exclusively in these old-growth forests. Detailed knowledge of nesting habitat selection provides guidance for habitat management and conservation. Habitat selection for this species has been studied at a variety of scales using ground and remote methods. However, because Marbled Murrelet nesting activity is limited to a single mossy platform on a single tree, we investigated nest tree selection within old-growth forest patches, using a set of 59 forest patches containing active nests. Nest trees were usually distinctive compared with neighboring trees in the surrounding 25 m radius patch. They averaged 15 to 20% taller than neighboring trees depending on region, had significantly larger stem diameters, more potential nesting platforms, and more moss. They had the most extreme values of height and width about three times as often as expected by chance. An analysis of moss platform use as a function of number of platforms per platform tree suggests that murrelets select individual platforms, rather than platform trees per se. Nonetheless, highly selective logging practices that remove high-value trees from stands may also remove trees most likely to be selected by nesting murrelets.

  16. The clumped-isotope geochemistry of exhumed marbles from Naxos, Greece

    Science.gov (United States)

    Ryb, U.; Lloyd, M. K.; Stolper, D. A.; Eiler, J. M.

    2017-07-01

    Exhumation and accompanying retrograde metamorphism alter the compositions and textures of metamorphic rocks through deformation, mineral-mineral reactions, water-rock reactions, and diffusion-controlled intra- and inter-mineral atomic mobility. Here, we demonstrate that these processes are recorded in the clumped- and single-isotope (δ13 C and δ18 O) compositions of marbles, which can be used to constrain retrograde metamorphic histories. We collected 27 calcite and dolomite marbles along a transect from the rim to the center of the metamorphic core-complex of Naxos (Greece), and analyzed their carbonate single- and clumped-isotope compositions. The majority of Δ47 values of whole-rock samples are consistent with exhumation- controlled cooling of the metamorphic complex. However, the data also reveal that water-rock interaction, deformation driven recrystallization and thermal shock associated with hydrothermal alteration may considerably impact the overall distribution of Δ47 values. We analyzed specific carbonate fabrics influenced by deformation and fluid-rock reaction to study how these processes register in the carbonate clumped-isotope system. Δ47 values of domains drilled from a calcite marble show a bimodal distribution. Low Δ47 values correspond to an apparent temperature of 260 °C and are common in static fabrics; high Δ47 values correspond to an apparent temperature of 200 °C and are common in dynamically recrystallized fabrics. We suggest that the low Δ47 values reflect diffusion-controlled isotopic reordering during cooling, whereas high Δ47 values reflect isotopic reordering driven by dynamic recrystallization. We further studied the mechanism by which dynamic recrystallization may alter Δ47 values by controlled heating experiments. Results show no significant difference between laboratory reactions rates in the static and dynamic fabrics, consistent with a mineral-extrinsic mechanism, in which slip along crystal planes was associated

  17. Investigating the genetic and epigenetic basis of big biological questions with the parthenogenetic marbled crayfish: A review and perspectives.

    Science.gov (United States)

    Vogt, Gunter

    2018-03-01

    In the last 15 years, considerable attempts have been undertaken to develop the obligately parthenogenetic marbled crayfish Procambarus virginalis as a new model in biology. Its main advantage is the production of large numbers of offspring that are genetically identical to the mother, making this crustacean particularly suitable for research in epigenetics. Now, a draft genome, transcriptome and genome-wide methylome are available opening new windows for research. In this article, I summarize the biological advantages and genomic and epigenetic features of marbled crayfish and, based on first promising data, discuss what this new model could contribute to answering of ''big'' biological questions. Genome mining is expected to reveal new insights into the genetic specificities of decapod crustaceans, the genetic basis of arthropod reproduction, moulting and immunity, and more general topics such as the genetic underpinning of adaptation to fresh water, omnivory, biomineralization, sexual system change, behavioural variation, clonal genome evolution, and resistance to cancer. Epigenetic investigations with the marbled crayfish can help clarifying the role of epigenetic mechanisms in gene regulation, tissue specification, adult stem cell regulation, cell ageing, organ regeneration and disease susceptibility. Marbled crayfish is further suitable to elucidate the relationship between genetic and epigenetic variation, the transgenerational inheritance of epigenetic signatures and the contribution of epigenetic phenotype variation to the establishment of social hierarchies, environmental adaptation and speciation. These issues can be tackled by experiments with highly standardized laboratory lineages, comparison of differently adapted wild populations and the generation of genetically and epigenetically edited strains.

  18. Genetic analyses of historic and modern marbled murrelets suggest decoupling of migration and gene flow after habitat fragmentation

    Science.gov (United States)

    M. Zachariah Peery; Laurie A. Hall; Sellas. Anna; Steven R. Beissinger; Craig Moritz; Martine Berube; Martin G. Raphael; S. Kim Nelson; Richard T. Golightly; Laura McFarlane-Tranquilla; Scott H. Newman; Per J. Palsboll

    2009-01-01

    The dispersal of individuals among fragmented populations is generally thought to prevent genetic and demographic isolation, and ultimately reduce extinction risk. In this study, we show that a century of reduction in coastal old-growth forests, as well as a number of other environmental factors, has probably resulted in the genetic divergence of marbled murrelets (...

  19. Marble in Israel : A. Shadmon. Ministry of Development, State of Israel, Jerusalem, 1965, 56 pp., 36 fig., 2 tables

    NARCIS (Netherlands)

    Manten, A.A.

    The booklet Marble in Israel is announced to be the first in a series of reports on the mineral building commodities of Israel, which series will summarize the information available on the subject at the Quarries Section of the Israel Geological Survey and the Office of the Controller of Mines.

  20. Digital processing of SEM images for the assessment of evaluation indexes of cleaning interventions on Pentelic marble surfaces

    International Nuclear Information System (INIS)

    Moropoulou, A.; Delegou, E.T.; Vlahakis, V.; Karaviti, E.

    2007-01-01

    In this work, digital processing of scanning-electron-microscopy images utilized to assess cleaning interventions applied on the Pentelic marble surfaces of the National Archaeological Museum and National Library in Athens, Greece. Beside mineralogical and chemical characterization that took place by scanning-electron-microscopy with Energy Dispersive X-ray Spectroscopy, the image-analysis program EDGE was applied for estimating three evaluation indexes of the marble micro-structure. The EDGE program was developed by the U.S. Geological Survey for the evaluation of cleaning interventions applied on Philadelphia City Hall. This computer program analyzes scanning-electron-microscopy images of stone specimens cut in cross-section for measuring the fractal dimension of the exposed surfaces, the stone near-surface fracture density, the shape factor (a surface roughness factor) and the friability index which represents the physico-chemical and physico-mechanical stability of the stone surface. The results indicated that the evaluation of the marble surface micro-structure before and after cleaning is achieved by the suggested indexes, while the performance of cleaning interventions on the marble surfaces can be assessed

  1. Native of the marble in ancient city, Nysa on the Meander of Hellenistic and Roman Period, Aydin- Western Anatolia - Turkey

    International Nuclear Information System (INIS)

    Kadioglu, M; Kadioglu, Y K

    2008-01-01

    Nysa, one of the most important cities of Caria in Hellenistic and Roman period, is located on the highway connecting Aydin (ancient name Tralleis) and Denizli, at about three kilometres northwest of Sultanhisar in western Anatolia of Turkey. The archaeological remains of Nysa are located on the slopes on the side of the stream called Tekkecik. The buildings, streets and public squares of the ancient city were supported by vaulted substructures adapted to the topographic conditions. As to the foundation of the city, Strabo relates that three brothers named Athymbros, Athymbrados, and Hydrelos came from Lakedaimon to Caria, and founded there three cities named after themselves. The small rock samples from the building of theatre, stadium, basement of agora and tomb were collected and determined under polarized microscope and confocal Raman spectroscopy to find out the native of these rock sources. The results of these studies reveal that the main rocks of these structures are composed from white colour marble. These marbles have granoblastic texture and are composed of mainly pressure twinned calcite as coarse grain size. The confocal Raman specroscopical studies of reveal that the marble building stone of Nysa city are mainly obtained from Jurassic Cretaceous of Western Anatolia marble

  2. Provenance of marbles used for building the internal spiral staircase of the bell tower of St. Nicholas Church (Pisa, Italy)

    Science.gov (United States)

    Lezzerini, Marco; Antonelli, Fabrizio; Gallello, Gianni; Ramacciotti, Mirco; Parodi, Luca; Alberti, Antonio; Pagnotta, Stefano; Legnaioli, Stefano; Palleschi, Vincenzo

    2017-05-01

    The aim of this study is to investigate the provenance of marbles used as architectural elements (bases, shafts and capitals of columns) for building the internal spiral staircase of the medieval bell tower of St. Nicholas Church at Pisa, Italy. Accordingly, the 45 collected marble samples have been analysed by optical microscopy, X-ray powder diffraction and mass spectroscopy for carbon and oxygen stable isotope ratio analysis; additionally, SEM-EDS analysis have been performed to complement data about accessory minerals. By comparison with literature data on the main sources of the white Mediterranean marbles used in ancient times, the results show that the analysed samples are mainly white crystalline marbles from Carrara (Italy) and, subordinately, from other Tuscan and Eastern Mediterranean quarrying areas. In fact, Mt. Pisano and Campiglia M.ma (Tuscany, Italy) and Marmara (Turkey), Paros, Mt. Penteli, Thasos (Greece) are minor sources. The other coloured stones identified on the strength of their macroscopic features are quartzites from Mt. Pisano area and granitoids from Sardinia and Island of Elba (Italy). Occasionally, a very limited number of architectonical elements made up of Acquabona limestone from Rosignano Marittimo (Livorno, Italy), red limestone with ammonites (the so-called "Rosso Ammonitico") and black limestone belonging to the Tuscan Nappe sequence, outcropping at northwest of Pisa in the nearby Monti d'Oltre Serchio area, are present.

  3. Native of the marble in ancient city, Nysa on the Meander of Hellenistic and Roman Period, Aydin- Western Anatolia - Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Kadioglu, M [Ankara University Faculty of Letters Archeological Department Ankara (Turkey); Kadioglu, Y K [Ankara University Engineering Faculty Geol. Eng. Department Ankara (Turkey)], E-mail: kadioglu@humanity.ankara.edu.tr, E-mail: kadi@eng.ankara.edu.tr

    2008-07-01

    Nysa, one of the most important cities of Caria in Hellenistic and Roman period, is located on the highway connecting Aydin (ancient name Tralleis) and Denizli, at about three kilometres northwest of Sultanhisar in western Anatolia of Turkey. The archaeological remains of Nysa are located on the slopes on the side of the stream called Tekkecik. The buildings, streets and public squares of the ancient city were supported by vaulted substructures adapted to the topographic conditions. As to the foundation of the city, Strabo relates that three brothers named Athymbros, Athymbrados, and Hydrelos came from Lakedaimon to Caria, and founded there three cities named after themselves. The small rock samples from the building of theatre, stadium, basement of agora and tomb were collected and determined under polarized microscope and confocal Raman spectroscopy to find out the native of these rock sources. The results of these studies reveal that the main rocks of these structures are composed from white colour marble. These marbles have granoblastic texture and are composed of mainly pressure twinned calcite as coarse grain size. The confocal Raman specroscopical studies of reveal that the marble building stone of Nysa city are mainly obtained from Jurassic Cretaceous of Western Anatolia marble.

  4. Logistic regression accuracy across different spatial and temporal scales for a wide-ranging species, the marbled murrelet

    Science.gov (United States)

    Carolyn B. Meyer; Sherri L. Miller; C. John Ralph

    2004-01-01

    The scale at which habitat variables are measured affects the accuracy of resource selection functions in predicting animal use of sites. We used logistic regression models for a wide-ranging species, the marbled murrelet, (Brachyramphus marmoratus) in a large region in California to address how much changing the spatial or temporal scale of...

  5. Meeting reproductive demands in a dynamic upwelling system: foraging strategies of a pursuit-diving seabird, the marbled murrelet

    Science.gov (United States)

    M. Zachariah Peery; Scott H. Newman; Curt D. Storlazzi; Steven R. Beissinger

    2009-01-01

    Seabirds maintain plasticity in their foraging behavior to cope with energy demands and foraging constraints that vary over the reproductive cycle, but behavioral studies comparing breeding and nonbreeding individuals are rare. Here we characterize how Marbled Murrelets (Brachyramphus marmoratus) adjust their foraging effort in response to changes...

  6. Cloning and characterization of 29 tetranucleotide and two dinucleotide polymorphic microsatellite loci from the endangered marbled murrelet (Brachyramphus marmoratus)

    NARCIS (Netherlands)

    Rew, MB; Peery, MZ; Beissinger, Steven R.; Berube, M; Lozier, JD; Rubidge, EM; Palsboll, PJ

    We developed 31 novel, polymorphic microsatellite loci in the marbled murrelet (Brachyramphus marmoratus), a critically endangered seabird. Variability was tested on 15 individuals from the Santa Cruz, California population, with each locus characterized by two to 12 alleles. Observed levels of

  7. Genome Sequence of Carbon Dioxide-Sequestering Serratia sp. Strain ISTD04 Isolated from Marble Mining Rocks

    OpenAIRE

    Kumar, Manish; Gazara, Rajesh Kumar; Verma, Sandhya; Kumar, Madan; Verma, Praveen Kumar; Thakur, Indu Shekhar

    2016-01-01

    The Serratia sp. strain ISTD04 has been identified as a carbon dioxide (CO2)-sequestering bacterium isolated from marble mining rocks in the Umra area, Rajasthan, India. This strain grows chemolithotrophically on media that contain sodium bicarbonate (NaHCO3) as the sole carbon source. Here, we report the genome sequence of 5.07?Mb Serratia sp. ISTD04.

  8. Comics and the Structure of Childhood Feeling: Sublimation and the Play of Pretending in Gilbert Hernandez's "Marble Season"

    Science.gov (United States)

    Lewkowich, David

    2016-01-01

    In this paper, I study the narrative structure of comics as a means to describe the ways that indeterminate modes of representation can allow the reader to imagine that which in childhood can never be fully expressed. Analyzing a number of panels from Gilbert Hernandez's graphic novel, "Marble Season," I describe a conceptual link…

  9. Strontium geochemistry and carbon and oxygen isotopic compositions of Lower Proterozoic dolomite and calcite marbles from the Marmorilik Formation, West Greenland

    International Nuclear Information System (INIS)

    Garde, A.A.

    1979-01-01

    The Marmorilik Formation, Rinkian mobile belt, West Greenland, is a large, Lower Proterozoic carbonate-rock sequence, deformed and metamorphosed under greenschist to amphibolite facies conditions. The pre-deformation thickness of the sequence is at least 2000 m, with about 1400 m of dolomite marble and 350 m of calcite marble. Strontium contents of forty-two dolomite and calcite marbles range from 30 to 100 ppm and 300 to 800 ppm, respectively, whereas samples with calcite of secondary origin have strontium contents between 80 ppm and 200 ppm. Carbon and oxygen isotope ratios were determined for forty calcite and dolomite marbles as -0.2+-1.0 per 1000 delta 13 C and -9.9+-1.5 per 1000 delta 18 O (vs. PDB) and are compatible with the isotopic compositions of unmetamorphosed carbonates of similar age. Calcite from eight calciumsilicate rocks, breccias and calcite veins is significantly more negative in delta 13 C and delta 18 O. Five 13 C analyses of graphite in marble range from -9.6 to -14 per 1000. Possible post-depositional changes in the strontium content and carbon and oxygen isotope compositions are discussed. It is concluded that (a) the calcite marbles are not dedolomites and are therefore of primary origin, (b) the delta 13 C and delta 18 O values of the marbles are primary or diagenetic (i.e., pre-metamorphic), and (c) the isotopic composition of the graphite is compatible with, though not necessarily evidence for, a biogenic origin. (Auth.)

  10. 汎用炉心解析システムMARBLE2の開発

    OpenAIRE

    横山 賢治; 神 智之; 平井 康志; 羽様 平

    2015-01-01

    汎用炉心解析システムMARBLEの第2版であるMARBLE2を開発した。MARBLE2では第1版(MARBLE1)で開発した基盤技術を利用して各種の機能拡張を行った。MARBLE1では導入できていなかった従来システム(JOINT-FR、SAGEP-FR)の機能を導入し、従来システムのほぼ全ての解析機能を統一されたユーザインターフェースを持つMARBLE上のサブシステムSCHEME上で実行できるようになった。特にMARBLE2では、MARBLE1では対応できていなかった感度解析にも対応できるようになった。また、将来の拡張性や柔軟性を確保するために、独自ソルバーの開発や改良を行った。更に、原子力機構で開発された解析コードやライブラリを導入し、同様にSCHEME上で利用できるように整備した。その他、外部機関で開発された解析コード等も必要に応じて導入した。これにより、gamma線計算や発熱計算等が可能となった。また、MARBLE上のもうひとつのサブシステムである高速炉実機燃焼解析システムORPHEUSの改良として、MARBLE1での利用経験をもとに各種の機能拡張や高速化を行いユーザ利便性...

  11. Sugaring marble in the Monumental Cemetery in Bologna (Italy): characterization of naturally and artificially weathered samples and first results of consolidation by hydroxyapatite

    Science.gov (United States)

    Sassoni, Enrico; Franzoni, Elisa

    2014-12-01

    The so-called sugaring of marble is a very common degradation phenomenon, affecting both historical monuments and modern buildings, which is originated by environmental temperature fluctuations. Thermal cycles are indeed responsible for micro-cracks formation at the boundaries between calcite grains, so that marble is subjected to granular disintegration and can be reduced to a sugar-like powder of isolated calcite grains by just the pressure of a finger. Since no effective, compatible and durable treatment for sugaring marble consolidation is currently available, in this paper a novel consolidating treatment recently proposed for limestone, based on the formation of hydroxyapatite inside the stone, was investigated for weathered marble. To test the new treatment on suitably decayed marble samples, some naturally sugaring marbles from the Monumental Cemetery in Bologna (Italy, nineteenth century) were firstly characterized by scanning electron microscope (SEM), mercury intrusion porosimetry (MIP) and ultrasonic pulse velocity (UPV) measurement. Then, artificially weathered samples were produced by heating fresh Carrara marble samples at 400 °C for 1 h. The effects of artificial weathering were characterized using the same techniques as above, and a very good agreement was found between microstructure and mechanical features of naturally and artificially weathered samples. Then, the hydroxyapatite-based treatment was tested on the so-obtained artificially weathered samples, and the treatment effects were characterized by UPV, MIP and SEM equipped with energy dispersive spectrometry and Fourier transform infrared spectroscopy. The hydroxyapatite-based treatment exhibited a remarkable ability of restoring marble cohesion and a good compatibility in terms of modifications in pore size distribution, which leads to regard this treatment as a very promising consolidant for weathered marble.

  12. Geological and blocky modeling of Qareh Qeshlaq marble deposit in order to optimizing the production planning of quarry

    Directory of Open Access Journals (Sweden)

    Jafar Abdollahi Sharif

    2013-04-01

    Full Text Available Qareh Qeshlaq marble quarry as one of the valuable resources of ornamental stones in West Azarbaijan province formed through thermal carbonate springs while its mineral deposit thickness is limited in comparison with surface extension. In the present research, geological and blocky modeling of the marble deposit was carried out in order to develop a production planning for this quarry, identifying the position of single-marketable-block extracted from it and increasing its economical aspects for exploitation. During the study, in addition to preparing a geological and blocky model for the quarry, firstly the optimum dimensions of its extractable single marketable-block were quantified and then through representing the confining surfaces equation of marble strata in the computer, the optimal maximum dimension and the number and exact location of the single marketable-blocks were determined and presented to the operating team. Based on the findings of these studies and according to the existing 83 exploratory boreholes data, it is possible to extract 183 single marketable-block pink marble and 103 single marketable-block malachite both with 1.5 × 2.5 × 2.5 m raw dimensions while only 2 single marketable-block alabaster layer with 1.3 × 2.5 × 2.5 m dimensions. The results also show that with applying extraction consideration, regarding the productivity coefficient of the layers, and removing the gradual color changes zone, the maximum thickness of the single marketable-blocks for the pink marble, malachite, and alabaster will become 1.65, 1.65 and 1.4 m, respectively.

  13. TOMOGRAFÍA DE RESISTIVIDAD ELÉCTRICA 3D EN LA CATEDRAL DE MORELIA, MÉXICO (3D Electrical Resistivity Tomography in Morelia Cathedral, Mexico

    Directory of Open Access Journals (Sweden)

    Gerardo Cifuentes-Nava

    2017-12-01

    results from survey using three-dimensional electrical resistivity tomography (TRE-3D carried out in 2014, 2016 and 2017, in Morelia Cathedral and along its northern front. The survey identified the location of deep structures which cannot be explained by geological context, suggesting the existence of a variety of subterranean structures of anthropogenic origin. The TRE-3D used in this study combines conventional and unconventional methodologies to offer insights into the distribution of subterranean structures at Morelia Cathedral, in accordance with both oral traditions and documented history.

  14. Protocol proposal for radon concentration mensuration from granitic rocks in marble factory

    International Nuclear Information System (INIS)

    Del Claro, Flavia

    2016-01-01

    Naturally occurring radionuclides such as radon ( 222 Rn), its decay products and other elements from the radioactive series of uranium ( 238 U and 235 U) and thorium ( 232 Th) are an important source of human exposure to natural radioactivity. The worldwide evaluation of health radiobiological effects and risks from population exposure to natural radionuclides is a growing concern. Radionuclides such as radon ( 222 Rn), the thoron ( 220 Rn), radio ( 2 '2'6Ra), thorium ( 23 '2Th) and potassium ( 40 K) may occur in materials commonly used in construction of dwellings and buildings. Thus, the radioactivity from marbles and granites is of importance, so that under certain conditions these materials radioactivity levels can be hazardous requiring the implementation of mitigation measurements. This research presents a technical protocol marble factories for the control human exposure to natural radioactivity exhaled from granitic rocks. The protocol was based on measurements of the 222 Rn and 220 Rn concentration in Brazilian granite rocks commonly nationally and exported. The 222 Rn and 220 Rn measurements were done using the AlphaGUARD (Saphymo GmbH) and RAD7 (Durridge Company) apparatus, respectively. The samples of granite were sealed in glass jars for 40 days in to achieve secular equilibrium between 226 Ra and 222 Rn radionuclides. The measurements were performed on Applied Nuclear Physics Laboratory at the Federal Technological University of Parana. Also, solid-state nuclear track detectors CR-39 were installed in a marble factory environments located in Curitiba - Parana for the evaluation of 222 Rn concentrations in workplaces. The CR-39 detectors were exposed for about 90 days and submitted to etching process. The alpha particle tracks were observed using an optical microscope. Some granite samples analyzed presented 222 Rn concentrations of attention, since the average values ranged from 3 ± 1 Bq/m 3 to 2087 ± 19 Bq/m 3 . The results obtained

  15. First record of Phormia regina (Meigen, 1826 (Diptera: Calliphoridae from mummies at the Sant’Antonio Abate Cathedral of Castelsardo, Sardinia, Italy

    Directory of Open Access Journals (Sweden)

    Giorgia Giordani

    2018-01-01

    Full Text Available The studies of insects from archaeological contexts can provide an important supplement of information to reconstruct past events, climate and environments. Furthermore, the list of the species present in an area in the past allows the reconstruction of the entomofauna on that area at that time, that can be different from the nowadays condition, providing information about biodiversity changes. In this work, the results of a funerary archaeoentomological study on samples collected from mummified corpses discovered during the restoration of the crypt of the Sant’Antonio Abate Cathedral of Castelsardo (Sardinia, Italy are reported. The majority of the sampled specimens were Diptera puparia, whereas only few Lepidoptera cocoons and some Coleoptera fragments were isolated. Among Diptera, Calliphoridae puparia were identified as Phormia regina (Meigen, 1826 and Calliphora vicina, (Robineau-Desvoidy, 1830 both species typical of the first colonization waves of exposed bodies. Three puparia fragments were also identified as belonging to a Sarcophaga Meigen, 1826, species (Sarcophagidae. Several Muscidae puparia of the species Hydrotaea capensis (Weidmermann, 1818, a late colonizer of bodies, and typical of buried bodies were also collected. The few moth (Lepidoptera cocoons were identified as belonging to the family Tineidae. This family comprises species feeding on dry tissues and hair typical of the later phases of the human decomposition. Among Coleoptera a single specimen in the family Histeridae, Saprinus semistriatus (Scriba, 1790 and a single elytra, potentially of a species in the family Tenebrionidae, were also collected. Overall, the samples collected indicated an initial colonization of the bodies in an exposed context, mainly in a warm season. This research allows the finding of elements indicating the presence, at least in the past, of P. regina in Sardinia. This species at the moment seems extinct from Sardinia while it is quite common

  16. Bearing Capacity of Floating Ice Sheets under Short-Term Loads: Over-Sea-Ice Traverse from McMurdo Station to Marble Point

    Science.gov (United States)

    2015-01-01

    under Short-Term Loads Over-Sea-Ice Traverse from McMurdo Station to Marble Point Co ld R eg io ns R es ea rc h an d En gi ne er in g La bo ra...Traverse from McMurdo Station to Marble Point Jason C. Weale and Devinder S. Sodhi Cold Regions Research and Engineering Laboratory (CRREL) U.S...Division of Polar Programs operates an over-sea-ice traverse from McMurdo Station to rou- tinely resupply Marble Point Camp. The traverse requires that

  17. For production of ceramic plates coating using waste kaolin, granite and marble

    International Nuclear Information System (INIS)

    Sales, J.L.; Morais, C.R.S.; Lima, L.M.R.; Altidis, M.E.D.

    2011-01-01

    The objective is to benefit and characterize waste from kaolin, marble and granite studying their thermal properties and spectroscopic in employment perspective on ceramic production of flooring boards. The residues were benefited through the process of dry grinding mill in greyhounds and passed through sieve 0.074 mm (ABNT No. 200), observing their suitability for the formulation of ceramic pastes. Tests were performed physicochemical characterization (particle size analysis, X-ray fluorescence and X-ray diffraction) and thermal (differential thermal analysis and thermogravimetry). The results showed that these residues showed satisfactory properties for the purpose for which it proposes, and contribute to reducing environmental impacts, allowing the reuse of the production of ceramic plates (author)

  18. Ciguatoxic Potential of Brown-Marbled Grouper in Relation to Fish Size and Geographical Origin

    Science.gov (United States)

    Chan, Thomas Y. K.

    2015-01-01

    To determine the ciguatoxic potential of brown-marbled grouper (Epinephelus fuscoguttatus) in relation to fish size and geographical origin, this review systematically analyzed: 1) reports of large ciguatera outbreaks and outbreaks with description of the fish size; 2) Pacific ciguatoxin (P-CTX) profiles and levels and mouse bioassay results in fish samples from ciguatera incidents; 3) P-CTX profiles and levels and risk of toxicity in relation to fish size and origin; 4) regulatory measures restricting fish trade and fish size preference of the consumers. P-CTX levels in flesh and size dependency of toxicity indicate that the risk of ciguatera after eating E. fuscoguttatus varies with its geographical origin. For a large-sized grouper, it is necessary to establish legal size limits and control measures to protect public health and prevent overfishing. More risk assessment studies are required for E. fuscoguttatus to determine the size threshold above which the risk of ciguatera significantly increases. PMID:26324735

  19. Multiphase boudinage: a case study of amphibolites in marble in the Naxos migmatite core

    Science.gov (United States)

    Virgo, Simon; von Hagke, Christoph; Urai, Janos L.

    2018-02-01

    In multiply deformed terrains multiphase boudinage is common, but identification and analysis of these is difficult. Here we present an analysis of multiphase boudinage and fold structures in deformed amphibolite layers in marble from the migmatitic centre of the Naxos metamorphic core complex. Overprinting between multiple boudinage generations is shown in exceptional 3-D outcrop. We identify five generations of boudinage, reflecting the transition from high-strain high-temperature ductile deformation to medium- to low-strain brittle boudins formed during cooling and exhumation. All boudin generations indicate E-W horizontal shortening and variable direction of bedding parallel extension, evolving from subvertical extension in the earliest boudins to subhorizontal N-S extension during exhumation. Two phases of E-W shortening can be inferred, the first associated with lower crustal synmigmatic convergent flow and the second associated with exhumation and N-S extension, possibly related to movement of the North Anatolian Fault.

  20. Monitoring Disaster-Related Power Outages Using NASA Black Marble Nighttime Light Product

    Science.gov (United States)

    Wang, Z.; Román, M. O.; Sun, Q.; Molthan, A. L.; Schultz, L. A.; Kalb, V. L.

    2018-04-01

    Timely and accurate monitoring of disruptions to the electricity grid, including the magnitude, spatial extent, timing, and duration of net power losses, is needed to improve situational awareness of disaster response and long-term recovery efforts. Satellite-derived Nighttime Lights (NTL) provide an indication of human activity patterns and have been successfully used to monitor disaster-related power outages. The global 500 m spatial resolution National Aeronautics and Space Administration (NASA) Black Marble NTL daily standard product suite (VNP46) is generated from Visible Infrared Imaging Radiometer Suite (VIIRS) Day/Night Band (DNB) onboard the NASA/National Oceanic and Atmospheric Administration (NOAA) Suomi National Polar-orbiting Partnership (Suomi- NPP) satellite, which began operations on 19 January 2012. With its improvements in product accuracy (including critical atmospheric and BRDF correction routines), the VIIRS daily Black Mable product enables systematic monitoring of outage conditions across all stages of the disaster management cycle.

  1. Bowing and expansion of natural stone panels: marble and limestone testing and assessment

    Directory of Open Access Journals (Sweden)

    Grelk, Bent

    2008-06-01

    Full Text Available Natural stone has been used as a building material for centuries. In the past, load bearing members were made of entirely of stone, but in the last 50 years new processing techniques have made the production and use of thin facade cladding a profitable venture. Unfortunately however, marble facades on buildings in Europe and elsewhere have undergone severe deterioration. The EC-financed TEAM project (2000-2005 studied the bowing observed on marble facades in both cold and warm climates. TEAM’s main objectives were to understand and explain the expansion, bowing, and strength loss mechanisms governing the decay of marble- and limestone-clad facades, and to draft new European standards to prevent the use of marble and limestone poorly suited to outdoor cladding. A survey of some 200 buildings afforded a clear picture of the geographical, geological and climatic scope of the problem. Detailed case studies of six buildings resulted in a facade assessment methodology that included a monitoring system and risk assessment. Both laboratory and field research was conducted on almost 100 different types of stone from different countries and in place in different climates. The outcome was the determination of the decay mechanisms and critical factors. Two test methods and respective precision statements, one for bowing and the other for irreversible thermal expansion in high humidity conditions, were prepared for submission to CEN TC 246.La piedra natural se ha empleado como material de construcción durante siglos. En el pasado, se solía utilizar en elementos de carga, pero en los últimos 50 años las nuevas técnicas de procesamiento han permitido que sea comercialmente rentable producir y utilizar revestimientos para fachadas de espesor reducido. Desafortunadamente, numerosas fachadas de mármol de edificios tanto en Europa como fuera de ella han sufrido graves problemas derivados del deterioro de la piedra. El proyecto TEAM (2000

  2. MONITORING DISASTER-RELATED POWER OUTAGES USING NASA BLACK MARBLE NIGHTTIME LIGHT PRODUCT

    Directory of Open Access Journals (Sweden)

    Z. Wang

    2018-04-01

    Full Text Available Timely and accurate monitoring of disruptions to the electricity grid, including the magnitude, spatial extent, timing, and duration of net power losses, is needed to improve situational awareness of disaster response and long-term recovery efforts. Satellite-derived Nighttime Lights (NTL provide an indication of human activity patterns and have been successfully used to monitor disaster-related power outages. The global 500 m spatial resolution National Aeronautics and Space Administration (NASA Black Marble NTL daily standard product suite (VNP46 is generated from Visible Infrared Imaging Radiometer Suite (VIIRS Day/Night Band (DNB onboard the NASA/National Oceanic and Atmospheric Administration (NOAA Suomi National Polar-orbiting Partnership (Suomi- NPP satellite, which began operations on 19 January 2012. With its improvements in product accuracy (including critical atmospheric and BRDF correction routines, the VIIRS daily Black Mable product enables systematic monitoring of outage conditions across all stages of the disaster management cycle.

  3. The marble head of a statuette from Mediana (excavations in 2001

    Directory of Open Access Journals (Sweden)

    Plemić Bojana

    2013-01-01

    Full Text Available During the archaeological excavations in Mediana in 2001, the head of a marble statuette of exceptional beauty and craftsmanship was discovered. It was an isolated discovery, the sculpture probably having been imported from some Greek artistic centre or an eastern Mediterranean workshop, presenting a part of a larger ensemble of sculptures that had adorned an imperial villa with peristyle. Since the head was found in pieces and being just part of a sculptural representation with no reliable attributes, the question of its identification is a difficult task. It was possible to determine, using stylistic traits' analysis that the statuette was made under the influence of Hellenistic cult sculpture, namely that it followed the rules of the school of Praxiteles. On the other hand, the iconographic elements, in particular that of the hairstyle, lead us to the conclusion that this statuette could represent one of two Roman goddesses, either Venus or Diana.

  4. PSI decides to write off most of its $2.7B Marble Hill investment

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    After the Indiana Supreme Court ruled last November that the utility may not recover its investment from the cancelled plant, Public Service Indiana (PSI) decided to write off a substantial portion of the $2.7 million already invested in the cancelled Marble Hill nuclear plant. The board will omit common stock dividends for three years and the preferred stock dividend for the first quarter. It will also accept a negotiated rate settlement of 8.2% increase. A 5% emergency surcharge will become permanent. The settlement calls for the utility to restrict capital expenditures over the next three years to the $285.1 million already budgeted for construction. Opposition from a consumers group argues that ratepayers should not be the risk bearers for PSI, but the utility argues that its long-term financial health depends on attracting and keeping investors

  5. [Methylophaga murata sp. nov.: a haloalkaliphilic aerobic methylotroph from deteriorating marble].

    Science.gov (United States)

    Doronina, N V; Li, Ts D; Ivanova, E G; Trotsenko, Iu A

    2005-01-01

    The haloalkaliphilic methylotrophic bacterium (strain Kr3) isolated from material scraped off the deteriorating marble of the Moscow Kremlin masonry has been found to be able to utilize methanol, methylamine, trimethylamine, and fructose as carbon and energy sources. Its cells are gram-negative motile rods multiplying by binary fission. Spores are not produced. The isolate is strictly aerobic and requires vitamin B12 and Na+ ions for growth. It is oxidase- and catalase-positive and reduces nitrates to nitrites. Growth occurs at temperatures between 0 and 42 degrees C (with the optimum temperatures being 20-32 degrees C), pH values between 6 and 11 (with the optimum at 8-9), and NaCl concentrations between 0.05 and 3 M (with the optimum at 0.5-1.5 M). The dominant cellular phospholipids are phosphatidylethanolamine, phosphatidylglycerol, and cardiolipin. The major cellular fatty acids are palmitic (C16:0), palmitoleic (C16:1), and octadecenoic (C18:1) acids. The major ubiquinone is Q8. The isolate accumulates ectoine and glutamate, as well as a certain amount of sucrose, to function as osmoprotectants and synthesizes an exopolysaccharide composed of carbohydrate and protein components. It is resistant to heating at 70 degrees C, freezing, and drying; utilizes methanol, with the resulting production of formic acid, which is responsible for the marble-degrading activity of the isolate; and implements the 2-keto-3-deoxy-6-phosphogluconate variant of the ribulose monophosphate pathway. The G+C content of its DNA is 44.6 mol%. Based on 16S rRNA gene sequencing and DNA-DNA homology levels (23-41%) with neutrophilic and alkaliphilic methylobacteria from the genus Methylophaga, the isolate has been identified as a new species, Methylophaga murata (VKM B-2303T = NCIMB 13993T).

  6. Marbled texture of sputtered Al/Si alloy thin film on Si

    Energy Technology Data Exchange (ETDEWEB)

    Gentile, M.G. [Physics Department and NIS Interdepartmental Center, University of Torino, via P. Giuria 1, 10125 Torino (Italy); Vishay Intertechnology, Diodes Division, Via Liguria 49, 10071 Borgaro Torinese, Turin (Italy); Muñoz-Tabares, J.A.; Chiodoni, A. [Istituto Italiano di Tecnologia, Center for Space Human Robotics, Corso Trento 21, 10129 Torino (Italy); Sgorlon, C. [Vishay Intertechnology, Diodes Division, Via Liguria 49, 10071 Borgaro Torinese, Turin (Italy); Para, I. [Department of Applied Science and Technology (DISAT), Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy); Carta, R.; Richieri, G. [Vishay Intertechnology, Diodes Division, Via Liguria 49, 10071 Borgaro Torinese, Turin (Italy); Bejtka, K. [Istituto Italiano di Tecnologia, Center for Space Human Robotics, Corso Trento 21, 10129 Torino (Italy); Merlin, L. [Vishay Intertechnology, Diodes Division, Via Liguria 49, 10071 Borgaro Torinese, Turin (Italy); Vittone, E. [Physics Department and NIS Interdepartmental Center, University of Torino, via P. Giuria 1, 10125 Torino (Italy)

    2016-08-01

    DC magnetron sputtering is a commonly used technique for the fabrication of silicon based electronic devices, since it provides high deposition rates and uniform large area metallization. However, in addition to the thickness uniformity, coating optical uniformity is a crucial need for semiconductor industrial processes, due to the wide use of optical recognition tools. In the silicon-based technology, aluminum is one of the most used materials for the metal contact. Both the pre-deposition substrate cleaning and the sputtering conditions determine the quality and the crystalline properties of the final Al deposited film. In this paper is shown that not all the mentioned conditions lead to good quality and uniform Al films. In particular, it is shown that under certain standard process conditions, Al/Si alloy (1% Si) metallization on a [100] Si presents a non-uniform reflectivity, with a marbled texture caused by flakes with milky appearance. This optical inhomogeneity is found to be caused by the coexistence of randomly orient Al/Si crystal, with heteroepitaxial Al/Si crystals, both grown on Si substrate. Based on the microstructural analysis, some strategies to mitigate or suppress this marbled texture of the Al thin film are proposed and discussed. - Highlights: • Sputtered Al/Si layers deposited on Si present evident optical non-uniformity • It could be an issue for optical recognition tools used in semiconductor industries • Optical non-uniformity is due to randomly oriented growth of Al grains. • Substrate misorientation and process temperature can mitigate the problem.

  7. Development of common user data model for APOLLO3 and MARBLE and application to benchmark problems

    International Nuclear Information System (INIS)

    Yokoyama, Kenji

    2009-07-01

    A Common User Data Model, CUDM, has been developed for the purpose of benchmark calculations between APOLLO3 and MARBLE code systems. The current version of CUDM was designed for core calculation benchmark problems with 3-dimensional Cartesian, 3-D XYZ, geometry. CUDM is able to manage all input/output data such as 3-D XYZ geometry, effective macroscopic cross section, effective multiplication factor and neutron flux. In addition, visualization tools for geometry and neutron flux were included. CUDM was designed by the object-oriented technique and implemented using Python programming language. Based on the CUDM, a prototype system for a benchmark calculation, CUDM-benchmark, was also developed. The CUDM-benchmark supports input/output data conversion for IDT solver in APOLLO3, and TRITAC and SNT solvers in MARBLE. In order to evaluate pertinence of CUDM, the CUDM-benchmark was applied to benchmark problems proposed by T. Takeda, G. Chiba and I. Zmijarevic. It was verified that the CUDM-benchmark successfully reproduced the results calculated with reference input data files, and provided consistent results among all the solvers by using one common input data defined by CUDM. In addition, a detailed benchmark calculation for Chiba benchmark was performed by using the CUDM-benchmark. Chiba benchmark is a neutron transport benchmark problem for fast criticality assembly without homogenization. This benchmark problem consists of 4 core configurations which have different sodium void regions, and each core configuration is defined by more than 5,000 fuel/material cells. In this application, it was found that the results by IDT and SNT solvers agreed well with the reference results by Monte-Carlo code. In addition, model effects such as quadrature set effect, S n order effect and mesh size effect were systematically evaluated and summarized in this report. (author)

  8. Experimental Investigation on Mechanical and Thermal Properties of Marble Dust Particulate-Filled Needle-Punched Nonwoven Jute Fiber/Epoxy Composite

    Science.gov (United States)

    Sharma, Ankush; Patnaik, Amar

    2018-03-01

    The present investigation evaluates the effects of waste marble dust, collected from the marble industries of Rajasthan, India, on the mechanical properties of needle-punched nonwoven jute fiber/epoxy composites. The composites with varying filler contents from 0 wt.% to 30 wt.% marble dust were prepared using vacuum-assisted resin-transfer molding. The influences of the filler material on the void content, tensile strength, flexural strength, interlaminar shear strength (ILSS), and thermal conductivity of the hybrid composites have been analyzed experimentally under the desired optimal conditions. The addition of marble dust up to 30 wt.% increases the flexural strength, ILSS, and thermal conductivity, but decreases the tensile strength. Subsequently, the fractured surfaces of the particulate-filled jute/epoxy composites were analyzed microstructurally by field-emission scanning electron microscopy.

  9. Laboratory study of SO2 dry deposition on limestone and marble: Effects of humidity and surface variables

    Science.gov (United States)

    Spiker, E. C.; Hosker, R.P.; Weintraub, V.C.; Sherwood, S.I.

    1995-01-01

    The dry deposition of gaseous air pollutants on stone and other materials is influenced by atmospheric processes and the chemical characteristics of the deposited gas species and of the specific receptor material. Previous studies have shown that relative humidity, surface moisture, and acid buffering capability of the receptor surface are very important factors. To better quantify this behavior, a special recirculating wind tunnel/environmental chamber was constructed, in which wind speed, turbulence, air temperature, relative humidity, and concentrations of several pollutants (SO2, O3, nitrogen oxides) can be held constant. An airfoil sample holder holds up to eight stone samples (3.8 cm in diameter and 1 cm thick) in nearly identical exposure conditions. SO2 deposition on limestone was found to increase exponentially with increasing relative humidity (RH). Marble behaves similarly, but with a much lower deposition rate. Trends indicate there is little deposition below 20% RH on clean limestone and below 60% RH on clean marble. This large difference is due to the limestone's greater porosity, surface roughness, and effective surface area. These results indicate surface variables generally limit SO2 deposition below about 70% RH on limestone and below at least 95% RH on marble. Aerodynamic variables generally limit deposition at higher relative humidity or when the surface is wet.The dry deposition of gaseous air pollutants on stone and other materials is influenced by atmospheric processes and the chemical characteristics of the deposited gas species and of the specific receptor material. Previous studies have shown that relative humidity, surface moisture, and acid buffering capability of the receptor surface are very important factors. To better quantify this behavior, a special recirculating wind tunnel/environmental chamber was constructed, in which wind speed, turbulence, air temperature, relative humidity, and concentrations of several pollutants (SO2, O3

  10. Toward a holistic environmental impact assessment of marble quarrying and processing: proposal of a novel easy-to-use IPAT-based method.

    Science.gov (United States)

    Capitano, Cinzia; Peri, Giorgia; Rizzo, Gianfranco; Ferrante, Patrizia

    2017-03-01

    Marble is a natural dimension stone that is widely used in building due to its resistance and esthetic qualities. Unfortunately, some concerns have arisen regarding its production process because quarrying and processing activities demand significant amounts of energy and greatly affect the environment. Further, performing an environmental analysis of a production process such as that of marble requires the consideration of many environmental aspects (e.g., noise, vibrations, dust and waste production, energy consumption). Unfortunately, the current impact accounting tools do not seem to be capable of considering all of the major aspects of the (marble) production process that may affect the environment and thus cannot provide a comprehensive and concise assessment of all environmental aspects associated with the marble production process. Therefore, innovative, easy, and reliable methods for evaluating its environmental impact are necessary, and they must be accessible for the non-technician. The present study intends to provide a contribution in this sense by proposing a reliable and easy-to-use evaluation method to assess the significance of the environmental impacts associated with the marble production process. In addition, an application of the method to an actual marble-producing company is presented to demonstrate its practicability. Because of its relative ease of use, the method presented here can also be used as a "self-assessment" tool for pursuing a virtuous environmental policy because it enables company owners to easily identify the segments of their production chain that most require environmental enhancement.

  11. The layout of icosakaidígono in the Jupiter-Ammon Clypeus of Tarragona (Ist century and the face of Christ of the Rosette in the Cathedral of Orvieto (14th century

    Directory of Open Access Journals (Sweden)

    J. Lluis i Ginovart

    2017-03-01

    Full Text Available The techniques of massive data capture, as the Terrestrial Laser Scanner and the digital photogrammetry, allow to accurately analyze close objects and others that are not accessible, by statistical methods. Its application has allowed assessing, from the geometric point of view, the sculptures of the figure Clypeus of Tarragona, Jupiter-Ammon (1st century and the one of the Orvieto’s Cathedral rosette, with the face of Christ (14th century. The Clypeus of Tarragona and Orvieto’s rosette are divided in 22 parts, forming a polygonal shape known as icosakaidígono. This polygon does not appear in the Elementa of Euclides, neither in the Almagesto of Ptolomeo, nor in the rare Practica Geometriae of the time. These polygons can be built by means of angular division inherited from astrolabe and quadrant builders. This polygon can be defined also through the rotation of the square, since the repeated support of the catheti on the hypotenuse allows the rotation of the tool, or other indirect methods. The conclusion of the analysis of these figures is that, statistically, both sculptures have a geometric construction equal to the Reliquiario del Corporale del Miracolo di Bolsena (1337-1338 of Orvieto’s Cathedral.

  12. A GEOMETRICAL SIMILARITY PATTERN AS AN EXPERIMENTAL MODEL FOR SHAPES IN ARCHITECTURAL HERITAGE: A CASE STUDY OF THE BASE OF THE PILLARS IN THE CATHEDRAL OF SEVILLE AND THE CHURCH OF SANTIAGO IN JEREZ, SPAIN

    Directory of Open Access Journals (Sweden)

    J. J. Moyano

    2017-02-01

    Full Text Available This paper proposes a procedure for the search of a geometrical similarity pattern in architectural heritage by means of calculating probability indexes to support hypotheses initially endorsed by documentary sources. The buildings analysed are the Cathedral of Seville and the Church of Santiago, in Jerez, Spain. The 3D models of their selected pillars are obtained by means of Terrestrial Laser Scanning (TLS, Optical Scanning (OS and photogrammetry through image-based modelling software (SFM-IBM. To this end, a procedure for the comparison of shapes is established. It is based on similarity statistics, the determination of homologous points and the agreement of characteristic sections. Here, two key aspects are considered: on the one hand, the metric standpoint; on the other hand, historical-graphical features of the 3D models: composition, techniques, styles, and historical-graphical documentary sources. Thus, putting aside the mere dimensional analysis, the sections are compared with graphical patterns and models of which the same authorship – stonemasons working in that age – is accurately known. As a result, the outcomes of this research reveal the geometrical similarity between the elements of the pillars of the Cathedral of Seville and the Church of Santiago.

  13. Ruschita Romanian marble - 130 years of official exploitation and 130 m depth of architectural beauty around the word

    Science.gov (United States)

    Cetean, Valentina

    2013-04-01

    Developed in a large metamorphic area, the marble deposit from Ruschita perimeter is the most important Romanian source for ornamental stone, the old quarry being operative since 1883. The closest locality offer the commercial name also, identical with the geological one as is defined in the technical referentials and in the denomination European standard. Ruschita is also an active quarry, developed by step-by-step expansion in depth (the initial extraction reached 130 m depth), but also in the adjacent areas. The important height of the open deposit offered the possibility to the owner, MARMOSIM SA, to apply an experimental extraction method, by underground mining. It is the only Romanian place, and few in the world, where this spectacular mining element can be found for dimension stone. The extraction gallery was built starting from the lower level of the old quarry and allowed obtaining nicer and bigger blocks. The Ruschita marble is a metamorphic stone with high crystallinity and medium size of crystals (until 0.2-0.5 mm). Has the basic colour from white and grey to pink, with many intermediary nuances generally given by grey veins and less by impurities from internal structure. The stone present irregular break, sometimes following the very narrow internal discontinuities, invisible at macroscopic analyse. The main physical - mechanical characteristics are presented below: Characteristic M.U. Value Apparent density Kg/m3 2680 - 2720 Water absorption % 0.12 - 0.21 Capillarity g/m2.s0,5 0.130-0.218 Porosity % 0.30 - 0.74 Compression strength N/mm2 85 - 120 Flexural strength MPa 15-18 Rupture energy J 5 Coefficient of frost cleftness % 10 -14 Abrasion resistance - Bohme cm3/50cm2 17-18 Salt crystallization % 0.1 Nowadays, the extraction in the Ruschita area is achieved by equipments from Dazzini, Fantini, Pellegrini, Korfamann, Caterpillar, Volvo and Komatsu. The average volume of blocks is bigger than 10-12 m2. The Ruschita marble can be easily cut at size and

  14. Durability assessment to environmental impact of nano-structured consolidants on Carrara marble by field exposure tests.

    Science.gov (United States)

    Bonazza, Alessandra; Vidorni, Giorgia; Natali, Irene; Ciantelli, Chiara; Giosuè, Chiara; Tittarelli, Francesca

    2017-01-01

    The EU policy of reducing the emissions of combustion generated pollutants entails climate induced deterioration to become more important. Moreover, products applied to preserve outdoor built heritage and their preliminary performance tests often turn out to be improper. In such context, the paper reports the outcomes of the methodology adopted to assess the durability and efficiency of nano-based consolidating products utilized for the conservation of carbonate artworks, performing field exposure tests on Carrara marble model samples in different sites in the framework of the EC Project NANOMATCH. Surface properties and cohesion, extent and penetration of the conservative products and their interactions with marble substrates and environmental conditions are here examined after outdoor exposure for eleven months in four different European cities and compared with the features of undamaged and of untreated damaged specimens undergoing the same exposure settings. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. A comparative study of pulmonary Koch's among marble stone worker community of Bhedaghat and nonmarble stone worker community of Garha

    OpenAIRE

    Shashi Prabha Tomar; Avadhesh PS Kushwah; Sonjjoay Pande; Pushpraj S Baghel

    2014-01-01

    Introduction: Occupational stone dust exposure may result in several health risks tuberculosis (TB) silicosis, obstructive as well as restrictive lung diseases, among which TB is more prevalent in developing countries like India. Most people residing in Bhedaghat engaged in carving statues from variable stones and marble rocks belongs to poor socioeconomic conditions and unaware of the preventive measures. Ultimately they end up in chronic respiratory problems and various complications. Objec...

  16. Multi-scale analyses of nest site selection and fledging success by marbled murrelets (Brachyramphus marmoratus) in British Columbia

    OpenAIRE

    Silvergieter, Michael Paul

    2009-01-01

    I studied nesting habitat selection and fledging success by marbled murrelets, a seabird that nests in old-growth forests of high economic value, at two regions of southwestern British Columbia. At Clayoquot Sound, habitat occurs in larger stands, and murrelets selected steeper slopes and patches with more platform trees, and shorter trees, than at random sites. At Desolation Sound, where smaller forest stands predominate, patch scale variables were less important; increased canopy complexity...

  17. Genome Sequence of Carbon Dioxide-Sequestering Serratia sp. Strain ISTD04 Isolated from Marble Mining Rocks.

    Science.gov (United States)

    Kumar, Manish; Gazara, Rajesh Kumar; Verma, Sandhya; Kumar, Madan; Verma, Praveen Kumar; Thakur, Indu Shekhar

    2016-10-20

    The Serratia sp. strain ISTD04 has been identified as a carbon dioxide (CO 2 )-sequestering bacterium isolated from marble mining rocks in the Umra area, Rajasthan, India. This strain grows chemolithotrophically on media that contain sodium bicarbonate (NaHCO 3 ) as the sole carbon source. Here, we report the genome sequence of 5.07 Mb Serratia sp. ISTD04. Copyright © 2016 Kumar et al.

  18. The Use of Waste Maroon Marble Powder and Iron Oxide Pigment in the Production of Coloured Self-Compacting Concrete

    Directory of Open Access Journals (Sweden)

    Mucteba Uysal

    2018-01-01

    Full Text Available This work covers some workability, mechanical, and durability properties of coloured self-compacting concrete (SCC containing maroon marble powder and iron oxide pigment. Pigments with varying amounts were used to produce coloured SCC. For this purpose, ten different series were prepared of which two of the series were pigment free that one of them was the colour of white SCC including limestone powder and the other one was the colour of maroon SCC including maroon marble powder. The other series were containing pigments with varying amounts. The water to binder ratio remained constant for all the series at 0.42. Slump flow, T50 time, V-funnel, and L-box tests were used to determine the workability of coloured SCC. The hardened properties that were determined included density, water absorption, ultrasonic pulse velocity (UPV, compressive strength, abrasion resistance, and impermeability. As workability, experimental results showed that coloured SCC could be obtained by using maroon marble powder and when iron oxide pigment used in amounts less than 6%. The addition of pigment notably increased the water absorption of SCC series. The use of smaller quantities of pigment caused slight increase in compressive strength. Higher pigment content also provided decreases in abrasive resistance, and after exposure to abrasion, mass losses were within the range of 0.89%–2.12% and the abrasion depths were within the range of 0.9 mm–2.1 mm. Among the varying amounts of pigmented series, M1 series which contains 1% pigment showed the best performance, and the findings indicated that it is possible to successfully utilize maroon marble powder and lower amounts of pigments in producing coloured SCC.

  19. Quarry waste management and recovery: first results connected to Carrara marble ravaneti (Italy)

    Science.gov (United States)

    Antonella Dino, Giovanna; Chiappino, Claudia; Rossetti, Piergiorgio

    2017-04-01

    Quarry waste (QW) represents a huge economic and environmental issue, due to loss of resources and to economic and environmental costs connected to waste management and landfilling activities. In many cases, valuable Raw Materials (RM) and Secondary Raw Materials (SRM) can be supplied by enhancing the QW recovery. In Italy large amounts of QW have been and still are dumped: such materials, if their quality (chemical, mineralogical, physical characteristics) and quantity are adequate, and if the impacts connected to their management are positive, can represent a valuable resource for SRM exploitation. Several dimension stone quarries have been and are interested by researches as for QW exploitation. Some researches show positive results, which are the basis for QW recovery (both from waste streams and from quarry dumps exploitation): a noticeable example is represented by Carrara marble waste. The Carrara quarry basin is characterized by ca. one hundred quarries for colored and white marble exploitation. The waste production can be summarized in: 80 Mm3 waste present in old quarry dumps (Ravaneti) and 3 Mm3/y of waste stream from quarrying activities. At present only 0.5 Mm3/y of QW is exploited for SRM production, causing a huge loss of resource. This has been the background for a preliminary research, on Carrara marble Ravaneti characterization, which was carried out thanks to the close cooperation between University of Torino, Società Apuana Marmi srl, and SET srl. In 2015, two QW dumping areas, Calocara and Lorano, were selected as representative for sampling activities. Three main sample categories were individuated based on granulometry (0.5-4 mm, 0-25 mm, 0-150 mm) to be characterized (size distribution, density, Atterberg limits, Los Angeles test, freezing and heat tests, flat and shape indexes, geochemistry, mineralogy). The results obtained are promising: the physical characterization shows an attitude for Carrara QW to be recovered as crushed materials

  20. The Kolmården serpentine marble in Sweden, a building stone found at many levels in the society.

    Science.gov (United States)

    Wikström, Anders; Pereira, Dolores

    2013-04-01

    The Kolmården marble is a green serpentine marble of Svekofennian age (c. 1900 Ma). Serpentine is mainly secondary after diopside. The rock has been used as far back as in the 13th century. But it was mainly due to the start of the building of the Royal castles in Stockholm in the 17th century when the stone became more extensively used. The quarries were in operation until the 1970s and during the last years the production was so rationalized that one finds the stone in stairs, pavement and non structural ornaments within "common" houses all over the country. One can also find this stone in many exclusive places all over the world (e.g. the Paris Opera house, League of Nations building in Geneva, Leeds University Library, Uppsala University, Rockefeller Center, etc). The importance of this stone in international architecture, the good physical and mechanical behaviour observed in its emplacements and the possibilities for preservation of some of the quarries makes the Kolmården marble a good candidate as Global Stone Heritage Stone. The nomination will also trigger international publications on this natural stone to spread its knowledge among scientists and architects to be able to select this rock in case that some restoration on the mentioned important buildings is needed at some point.

  1. Changes on aggregation in mine waste amended with biochar and marble mud

    Science.gov (United States)

    Ángeles Muñoz, María; Guzmán, Jose; Zornoza, Raúl; Moreno-Barriga, Fabián; Faz, Ángel; Lal, Rattan

    2016-04-01

    Mining activities have produced large amounts of wastes over centuries accumulated in tailing ponds in Southeast Spain. Applications of biochar may have a high potential for reclamation of degraded soils. Distribution, size and stability of aggregates are important indices of soil physical quality. However, research data on aggregation processes at amended mining tailings with biochar are scanty. Therefore, the aim of this study was to determine the effects of seven different treatments involving biochar and marble mud (MM) on the aggregation in mine waste (MW). Seven different treatments were tested after 90 days of incubation in the laboratory. These treatments were the mix of MW and: biochar from solid pig manure (PM), biochar from cotton crop residues (CR), biochar from municipal solid waste (MSW), marble mud (MM), PM+MM, CR+MM, MSW+MM and control without amendment. High sand percentages were identified in the MW. The biochars made from wastes (PM, CR, MSW) were obtained through pyrolysis of feedstocks. The water stability of soil aggregates was studied. The data on total aggregation were corrected for the primary particles considering the sandy texture of the MW. Moreover, partial aggregation was determined for each fraction and the mean weight diameter (MWD) of aggregates was computed. Soil bulk density and total porosity were also determined. No significant differences were observed in total aggregation and MWD among treatments including the control. For the size range of >4.75 mm, there were significant differences in aggregates > 4.75 mm between CR+MM in comparison with that for CT. There were also significant differences between MSW and PM+MM for the 1-0.425 mm fraction, and between CT and MM and CR for 0.425-0.162 mm aggregate size fractions. Therefore, CR-derived biochar applied with MM enhanced stability of macro-aggregates. Furthermore, soil bulk density was also the lowest bulk density and total porosity the highest for the CR-derived biochar

  2. Multidisciplinary Approaches to Radiation Balanced Lasers (MARBLe): 1st Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Hehlen, Markus Peter [Los Alamos National Lab. (LANL) and New Mexico Consortium (NMC), Los Alamos, NM (United States)

    2017-09-12

    The initial main modifications of the existing μPD crystal-growth system at LANL have been completed. This now gives us the new capability to develop the growth of crystalline RBL materials by both the μPD and the Bridgman method. Quantitative mass spectrometry of the growth atmosphere was conducted to identify possible sources of gaseous trace species (primarily hydrogen) that could cause the undesired reduction of Yb3+ to Yb2+ during the crystal growth. Hydrogen was found to be at sufficiently low levels to not be a respective concern. Studies on the thermal decomposition of YbF3 to form Yb2+ are currently underway in collaboration with MARBLe team member Prof. Pauzauskie. First samples of Yb3+-doped YLiF4 (YLF:Yb) and undoped LiLuF4 (LLF) were grown, and MARBLe team member Prof. Sheik-Bahae has performed measurements of laser-induced heating (YLF:Yb) and background absorption coefficient (LLF). We discovered that one or several of the YF3, LiF, and YbF3 precursors contains organic impurities that chemically reduce to black residue during the high-temperature growth in oxygen-free argon atmosphere. A process for removal of these residues prior to growth is being considered. Comparing the results from incongruently melting YLF with those of congruently melting LLF indicate that a congruently melting material is preferred for Bridgman growth. Crystal-growth experiments with LLF are currently underway. The results of these studies on Yb3+ doped materials will be directly applicable to the future growth of Er3+ and Tm3+ doped as well as Yb3+, Nd3+ co-doped RBL crystals. There was no activity on the parallel effort of developing rareearth- doped chalcogenide glasses. The primary reason was a lack of manpower due to a delayed hiring of a student. In September 2017, we have hired a Postdoctoral Researcher who will be

  3. A kinetic study of the replacement of calcite marble by fluorite

    Science.gov (United States)

    Trindade Pedrosa, Elisabete; Boeck, Lena; Putnis, Christine V.; Putnis, Andrew

    2016-04-01

    Replacement reactions are relevant in any situation that involves the reequilibration between a solid and an aqueous fluid phase and are commonly controlled by an interface-coupled dissolution-precipitation mechanism (Putnis and Putnis, 2007). These reactions control many large-scale Earth processes whenever aqueous fluids are available, such as during metamorphism, metasomatism, and weathering. An important consequence of coupled dissolution-precipitation is the generation of porosity in the product phase that then allows the infiltration of the fluid within the mineral being replaced. Understanding the mechanism and kinetics of the replacement of carbonates by fluorite has application in earth sciences and engineering. Fluorite (CaF2) occurs in all kinds of rocks (igneous, sedimentary, and metamorphic) and its origin is commonly associated with hydrothermal fluids. Moreover, calcium carbonate has been suggested as a successful seed material for the sequestration of fluoride from contaminated waters (Waghmare and Arfin, 2015). The aim of the present work is to investigate aspects of the replacement of calcium carbonate by fluorite to better understand the mechanism and kinetics of this reaction. Small cubes (˜ 3 × 3 × 3 mm) of Carrara marble (CaCO3 > 99 %) were cut and reacted with a 4 M ammonium fluoride (NH4F) solution for different times (1 to 48 hours) and temperatures (60, 80, 100, and 140 ° C). The microstructure of the product phases was analysed using SEM. The kinetics of replacement was monitored from the Rietveld analysis of X-ray powder diffraction patterns of the products as a function of temperature and reaction time. After reaction, all samples preserved their size and external morphology (a pseudomorphic replacement) and the product phase (fluorite) was highly porous. The activation energy Ea (kJ/mol) of the replacement reaction was empirically determined by both model-fitting and model-free methods. The isoconversional method yielded an

  4. How Physical Processes are Informing River Management Actions at Marble Bluff Dam, Truckee River, Nevada

    Science.gov (United States)

    Bountry, J.; Godaire, J.; Bradley, D. N.

    2017-12-01

    At the terminus of the Truckee River into Pyramid Lake (Nevada, USA), upstream river management actions have dramatically reshaped the river landscape, posing significant challenges for the management of endangered aquatic species and maintenance of existing infrastructure. Within the last 100 years, upstream water withdrawal for human uses has resulted in a rapid lowering of Pyramid Lake which initiated up to 90 ft of channel incision. In 1976 Marble Bluff Dam was constructed to halt the upstream progression of channel incision and protect upstream agricultural lands, tribal resources, and infrastructure. Since construction an additional 40 ft of lake lowering and subsequent channel lowering now poses a potential risk to the structural integrity of the dam. The dynamic downstream river combined with ongoing reservoir sedimentation pose challenges to fish passage facilities that enable migration of numerous endangered cui-ui and threatened Lahontan Cutthroat Trout (LCT) to upstream spawning areas each year. These facilities include a fish lock at the dam, a fish bypass channel which allows fish to avoid the shallow delta area during low lake levels, and a meandering channel constructed by the Nature Conservancy to connect the bypass channel to the receding Pyramid Lake. The reservoir formed by Marble Bluff Dam has completely filled with sediment which impacts fish passage facilities. The original operating manual for the dam recommends year-round flushing of sediment through radial gates, but this can no longer be accomplished. During critical fish migration periods in the spring operators must ensure fish entrance channels downstream of the dam are not buried with released sediment and fish are not trapped in a portion of the reservoir full of sediment that would risk sending them back over the dam. To help inform future reservoir sediment and infrastructure management strategies, we bracket a range of potential river responses to lake level lowering and floods

  5. Dental caries experience and treatment needs of green marble mine laborers in Udaipur district, Rajasthan, India

    Directory of Open Access Journals (Sweden)

    Duraiswamy Prabu

    2008-01-01

    Full Text Available Background and Objectives: The study was undertaken at Kesariyaji, located in Udaipur district of Rajasthan. There are about 3 million workers who marble mine at Rajasthan. Living conditions of these workers are substandard and most of them are immigrant workers living in tiny shacks. Majority of them belong to lower socioeconomic status with poor educational background. The present study was carried out to estimate dental caries prevalence and treatment needs of laborers working in the green marble mines of Udaipur district. Basic Research Design: The data was collected using the methods and standards recommended by the WHO. Dentition status and treatment needs along with decayed, missing, and filled teeth (DMFT index, and decayed, missing, and filled surfaces score were recorded. Standard error of mean was calculated for all the mean values of treatment needs. There were three examiners, who were trained before the survey for inter-examiner variability, and the reliability was tested by means of weighted kappa statistics, which was 90%. Participants: The study population comprised 513 men in four age groups of 18-25, 26-34, 35-44, and 45-54 years, respectively. Results: The mean DMFT for all age groups was 3.13 with highest mean of 4.0 for the age group of 45-54 years. Mean decayed teeth were 2.60, 3.33, 1.46, and 1.5 for the age groups 15-24, 25-34, 35-44, and 45-54 years, respectively. Filled component was nil for all age groups. Most of the subjects required one surface filling with a very less proportion needing pulp care. Conclusions: The missing component constituted the major part of DMFT index in the 45-54 years age group and the absence of filled component in the whole study population implies that the treatment needs of the study population are unmet. Thus, intervention in the form of oral health promotion and curative services are the need of the hour.

  6. Geological hazard zonation in a marble exploitation area (Apuan Alps, Italy)

    Science.gov (United States)

    Francioni, M.; Salvini, R.; Riccucci, S.

    2011-12-01

    The present paper describes the hazard mapping of an exploitation area sited in the Apuan Alps marble district (Italy) carried out by the integration of various survey and analysis methodologies. The research, supported by the Massa and Carrara Local Sanitary Agency responsible for workplace health and safety activities, aimed to reduce the high degree hazard of rock fall caused by the presence of potentially unstable blocks located on slopes overhanging the marble quarries. The study of rocky fronts bases on the knowledge of both the structural setting and the physical-mechanical properties of intact material and its discontinuities. In this work the main difficulty in obtaining this information was the inaccessibility of the slope overhanging the area (up to 500 meters high). For this reason, the structural and geological-engineering surveys were integrated by outcomes from digital photogrammetry carried out through terrestrial stereoscopic photos acquired from an aerostatic balloon and a helicopter. In this way, it was possible to derive the geometrical characteristics of joints (such as discontinuities dip, dip direction, spacing and persistence), blocks volumes and slopes morphology also in inaccessible areas. This information, combined with data coming from the geological-engineering survey, was used to perform the stability analysis of the slope. Subsequently, using the topographic map at the scale of 1:2,000, the Digital Terrain Model (DTM) of the slopes and several topographic profiles along it were produced. Assuming that there is a good correspondence between travelling paths and maximum down slope angle, probable trajectories of rock fall along the slope were calculated on the DTM by means of a GIS procedure which utilizes the ArcHydro module of EsriTM ArcMap software. When performing such a 2D numerical modelling of rock falls, lateral dispersion of trajectories has often been hampered by the "a priori" choice of the travelling path. Such a choice can

  7. Tricky Treats

    Centers for Disease Control (CDC) Podcasts

    The Eagle Books are a series of four books that are brought to life by wise animal characters - Mr. Eagle, Miss Rabbit, and Coyote - who engage Rain That Dances and his young friends in the joy of physical activity, eating healthy foods, and learning from their elders about health and diabetes prevention. Tricky Treats shows children the difference between healthy snacks and sweet treats.

  8. Structural and hydrological controls on the development of a river cave in marble (Tapagem Cave - SE Brazil

    Directory of Open Access Journals (Sweden)

    William Sallun Filho

    2015-01-01

    Full Text Available Tapagem Cave (or Devil’s Cave is a river cave developed in the dolomite marble karst of the Serra do André Lopes (State of São Paulo, southeastern Brazil. Although this region is a plateau with significant variation in elevation and a humid subtropical climate, the cave is an anomalous feature in the André Lopes karst because there are few other caves. The marble, which is in a synclinal structure with subjacent phyllites, is a karst aquifer perched above the regional base level (Ribeira River and has little allogenic recharge. The cave developed on a secondary anticline on the northwest flank of the marble synform forming a blind valley, the Tapagem River sink, that is an underground tributary of Ostras River. Development of the cave is due to the entrenchment of the Ostras through-valley and the large allogenic catchment area of the sink. In plan view, the morphology of the cave can be divided into three different sectors. The first sector, known as the Tourist Sector, has extensive collapse rooms, fossil passages and a variety of speleothems of notable dimensions. The second and most extensive sector is the river passage, which is a sinuous gallery controlled by marble banding with NE-SW cleavage and NW-SE fractures. In cross-section, the passages are vadose canyons up to 70 m in height, controlled by the marble banding. Four NW-SE diabase dykes in this passage do not affect its direction in plan view. The third sector is an extensive network of passages and collapse rooms, which are interlaced in plan view and on different levels, forming a maze pattern. Initially, the Tapagem and Ostras Rivers developed on a gentle surface and flowed into the Ribeira River. With the entrenchment of the Ostras through-valley, the Tapagem River partially infiltrated via a paleosink into the upper passage of the “Erectus Room," remaining a half-blind valley. Following a series of collapses and obstructions, the River next infiltrated via the current

  9. Use of waste from the marble industry as filler for the production of self-compacting concretes

    Directory of Open Access Journals (Sweden)

    Valdez, P.

    2011-03-01

    Full Text Available This study evaluates the possibilities of using residual slurry from the cutting and superficial treatment of marble for the production of self-compacting concrete (SCC. The study considers the replacement of 30% of cement by the waste material, and assessed the effects on SCC properties in fresh and hardened states. Rheological characteristics were evaluated at the paste and concrete levels. Physical-mechanical characterization considers the rate of shrinkage and compressive strength gain. Pastes and concrete properties using waste marble as filler are compared with mixtures that include limestone filler, either added to the concrete or the cement. For the same dosage, an improvement in the flowability was observed in SCC with waste marble filler. The mechanical properties of the SCC adopting marble waste are equivalent to the SCC with limestone filler. The study shows that residual slurry from the processing of marble can represents an appropriate filler to be used in SCC.

    El presente estudio evalúa las posibilidades de utilización de lodos residuo de la industria del corte y tratamiento superficial del mármol para la producción de hormigón autocompactante (HAC. Se estudia el efecto del remplazo de un 30% del cemento por el residuo. Se valoran las características reológicas a nivel pasta y hormigón. La caracterización físico-mecánica contempla la evolución de la retracción y de la resistencia a compresión. Se comparan las prestaciones de pastas y hormigones empleando el residuo con mezclas que incorporan filler calizo, ya sea adicionado al hormigón o presente en el cemento. Se observa una mejora de la fluidez en el caso de los HAC que contienen el residuo estudiado; las propiedades mecánicas de éstos resultan equivalentes a las de los HAC con filler calizo. Se concluye que los lodos residuo del procesamiento del mármol pueden representan un filler adecuado para su uso en HAC.

  10. Underwater microwave ignition of hydrophobic thermite powder enabled by the bubble-marble effect

    International Nuclear Information System (INIS)

    Meir, Yehuda; Jerby, Eli

    2015-01-01

    Highly energetic thermite reactions could be useful for a variety of combustion and material-processing applications, but their usability is yet limited by their hard ignition conditions. Furthermore, in virtue of their zero-oxygen balance, exothermic thermite reactions may also occur underwater. However, this feature is also hard to utilize because of the hydrophobic properties of the thermite powder, and its tendency to agglomerate on the water surface rather than to sink into the water. The recently discovered bubble-marble (BM) effect enables the insertion and confinement of a thermite-powder batch into water by a magnetic field. Here, we present a phenomenon of underwater ignition of a thermite-BM by localized microwaves. The thermite combustion underwater is observed in-situ, and its microwave absorption and optical spectral emission are detected. The vapour pressure generated by the thermite reaction is measured and compared to theory. The combustion products are examined ex-situ by X-ray photo-electron spectroscopy which verifies the thermite reaction. Potential applications of this underwater combustion effect are considered, e.g., for detonation, wet welding, thermal drilling, material processing, thrust generation, and composite-material production, also for other oxygen-free environments

  11. Experimental and modelling study of pulsed optically stimulated luminescence in quartz, marble and beta irradiated salt

    International Nuclear Information System (INIS)

    Pagonis, V; Mian, S M; Barnold, C; Chithambo, M L; Christensen, E

    2009-01-01

    Optical stimulation luminescence (OSL) signals can be obtained using continuous-wave optical stimulation (CW-OSL), the linear modulation optical stimulation method (LM-OSL) and the time-resolved optical stimulation (TR-OSL) method. During TR-OSL measurements, the stimulation and emission of luminescence are experimentally separated in time by using short light pulses. This paper presents new TR-OSL data for annealed high purity synthetic quartz, for marble and for commercially available iodized salt. A new type of behaviour for TR-OSL signals for quartz and iodized salt is presented, in which the OSL signal exhibits a nonmonotonic behaviour during optical stimulation; this type of behaviour has not been reported previously in the literature for quartz. Furthermore, a luminescence component with very long luminescence lifetime is reported for some quartz aliquots, which may be due to the presence of a delayed-OSL (DOSL) mechanism in quartz. A new kinetic model for TR-OSL in quartz is presented, which is based on a main electron trap and on several luminescence centres. The model is used to quantitatively fit several sets of experimental data of pulsed optically stimulated luminescence from quartz.

  12. The Effect of Recurrent Floods on Genetic Composition of Marble Trout Populations

    Science.gov (United States)

    Pujolar, José Martin; Vincenzi, Simone; Zane, Lorenzo; Jesensek, Dusan; De Leo, Giulio A.; Crivelli, Alain J.

    2011-01-01

    A changing global climate can threaten the diversity of species and ecosystems. We explore the consequences of catastrophic disturbances in determining the evolutionary and demographic histories of secluded marble trout populations in Slovenian streams subjected to weather extremes, in particular recurrent flash floods and debris flows causing massive mortalities. Using microsatellite data, a pattern of extreme genetic differentiation was found among populations (global F ST of 0.716), which exceeds the highest values reported in freshwater fish. All locations showed low levels of genetic diversity as evidenced by low heterozygosities and a mean of only 2 alleles per locus, with few or no rare alleles. Many loci showed a discontinuous allele distribution, with missing alleles across the allele size range, suggestive of a population contraction. Accordingly, bottleneck episodes were inferred for all samples with a reduction in population size of 3–4 orders of magnitude. The reduced level of genetic diversity observed in all populations implies a strong impact of genetic drift, and suggests that along with limited gene flow, genetic differentiation might have been exacerbated by recurrent mortalities likely caused by flash flood and debris flows. Due to its low evolutionary potential the species might fail to cope with an intensification and altered frequency of flash flood events predicted to occur with climate change. PMID:21931617

  13. Wireless Sensing Based on RFID and Capacitive Technologies for Safety in Marble Industry Process Control

    Directory of Open Access Journals (Sweden)

    Fabrizio Iacopetti

    2013-01-01

    Full Text Available This paper presents wireless sensing systems to increase safety and robustness in industrial process control, particularly in industrial machines for marble slab working. The process is performed by abrasive or cutting heads activated independently by the machine controller when the slab, transported on a conveyer belt, is under them. Current slab detection systems are based on electromechanical or optical devices at the machine entrance stage, suffering from deterioration and from the harsh environment. Slab displacement or break inside the machine due to the working stress may result in safety issues and damages to the conveyer belt due to incorrect driving of the working tools. The experimented contactless sensing techniques are based on four RFID and two capacitive sensing technologies and on customized hardware/software. The proposed solutions aim at overcoming some limitations of current state-of-the-art detection systems, allowing for reliable slab detection, outside and/or inside the machine, while maintaining low complexity and at the same time robustness to industrial harsh conditions. The proposed sensing devices may implement a wireless or wired sensor network feeding detection data to the machine controller. Data integrity check and process control algorithms have to be implemented for the safety and reliability of the overall industrial process.

  14. Underwater microwave ignition of hydrophobic thermite powder enabled by the bubble-marble effect

    Energy Technology Data Exchange (ETDEWEB)

    Meir, Yehuda; Jerby, Eli, E-mail: jerby@eng.tau.ac.il [Faculty of Engineering, Tel Aviv University, Ramat Aviv 6997801 (Israel)

    2015-08-03

    Highly energetic thermite reactions could be useful for a variety of combustion and material-processing applications, but their usability is yet limited by their hard ignition conditions. Furthermore, in virtue of their zero-oxygen balance, exothermic thermite reactions may also occur underwater. However, this feature is also hard to utilize because of the hydrophobic properties of the thermite powder, and its tendency to agglomerate on the water surface rather than to sink into the water. The recently discovered bubble-marble (BM) effect enables the insertion and confinement of a thermite-powder batch into water by a magnetic field. Here, we present a phenomenon of underwater ignition of a thermite-BM by localized microwaves. The thermite combustion underwater is observed in-situ, and its microwave absorption and optical spectral emission are detected. The vapour pressure generated by the thermite reaction is measured and compared to theory. The combustion products are examined ex-situ by X-ray photo-electron spectroscopy which verifies the thermite reaction. Potential applications of this underwater combustion effect are considered, e.g., for detonation, wet welding, thermal drilling, material processing, thrust generation, and composite-material production, also for other oxygen-free environments.

  15. 2002 Blue Marble and Developments in HDTV Technology for Public Outreach

    Science.gov (United States)

    Hasler, Fritz; Starr, David OC. (Technical Monitor)

    2001-01-01

    Fritz Hasler (NASA/Goddard) will demonstrate the latest Blue Marble Digital Earth technology. We will fly in from space through Terra, Landsat 7, to 1 m Ikonos "Spy Satellite" data of Disney World and the Orlando Convention Center. You will see the complete global cloud free and cloudy 500 m datasets from the EOS Terra satellite. Spectacular new animations from Terra, Landsat 7, and SeaWiFS will be presented. See also animations of the hurricanes & tropical storms of the 2001 season, as well as Floyd, Georges, and Mitch, etc. from GOES & TRMM supported by MM5 3-D nested numerical model results. See movies assembled using new low cost HDTV nonlinear editing equipment that is revolutionizing the way we communicate scientific results. See climate change in action with Global Land & Ocean productivity changes over the last 20 years. Remote sensing observations of ocean SST, height, winds, color, and El Nino from GOES, AVHRR, SSMI & SeaWiFS are put in context with atmospheric and ocean simulations. Compare symmetrical equatorial eddies observed by GOES with the simulations.

  16. Microscopic Characterization of Tensile and Shear Fracturing in Progressive Failure in Marble

    Science.gov (United States)

    Cheng, Yi; Wong, Louis Ngai Yuen

    2018-01-01

    Compression-induced tensile and shear fractures were reported to be the two fundamental fracture types in rock fracturing tests. This study investigates such tensile and shear fracturing process in marble specimens containing two different flaw configurations. Observations first reveal that the development of a tensile fracture is distinct from shear fracture with respect to their nucleation, propagation, and eventual formation in macroscale. Second, transgranular cracks and grain-scale spallings become increasingly abundant in shear fractures as loading increases, which is almost not observed in tensile fractures. Third, one or some dominant extensional microcracks are commonly observed in the center of tensile fractures, while such development of microcracks is almost absent in shear fractures. Microcracks are generally of a length comparable to grain size and distribute uniformly within the damage zone of the shear fracture. Fourth, the width of densely damaged zone in the shear fracture is nearly 10 times of that in the tensile fracture. Quantitative measurement on microcrack density suggests that (1) microcrack density in tensile and shear fractures display distinct characteristics with increasing loading, (2) transgranular crack density in the shear fracture decreases logarithmically with the distance away from the shear fracture center, and (3) whatever the fracture type, the anisotropy can only be observed for transgranular cracks with a large density, which partially explains why microcrack anisotropy usually tends to be unobvious until approaching peak stress in specimens undergoing brittle failure. Microcracking characteristics observed in this work likely shed light to some phenomena and conclusions generalized in seismological studies.

  17. Investigation of Mode I fracture toughness of red Verona marble after thermal treatment

    Directory of Open Access Journals (Sweden)

    Daniela Scorza

    2015-10-01

    Full Text Available The present paper aims to assess the effect of freeze/thaw cycles on fracture behaviour of a natural stone: the red Verona marble. A wide variety of specimen types and methods to determine Mode I fracture toughness of natural stones are available in the literature and, in this context, the model originally proposed for plain concrete, i.e. the Two-Parameter Model (TPM, is adopted. Such a method is able to take into account the slow nonlinear crack growth occurring before the peak load, typical of quasi-brittle materials, with the advantage of easy specimen preparation and simple test configuration. In the present paper, the atmospheric ageing is simulated by means of thermal pre-treatments consisting of freeze/thaw cycles. Experimental tests are carried out using three-point bending Single-Edge Notched (SEN specimens, according to the TPM procedure. The effects of thermal treatment on both mechanical and fracture parameters are examined in terms of elastic modulus and fracture toughness, respectively

  18. Application of INAA to archaeometry: Provenance determination of ancient Greek and Roman white marble artifacts

    International Nuclear Information System (INIS)

    Moens, L.J.; Roos, P.G.; De Paepe, P.A.

    1991-01-01

    During the past five years a large scale project was set up to develop a method to determine the provenance of ancient sculptures made of white marble. The problem was solved by applying three different methods of analysis to the material: INAA and EAAS for the determination of minor- and trace-elements, mass spectrometry measuring the relative abundance of the stable O- and C-isotopes and finally petrography. It was found that these three methods yield complementary information. The role of INAA is of capital importance since it allows one to determine the concentration of a large number of elements in a single sample. In addition the application of multi-variate statistical analysis was indispensable to extract the useful information from the data set. After the analysis of hundreds of quarry samples and the setting up of a reference data base, the method was applied to the provenance determination of about a hundred Green and Roman sculptures from several museums in Europe and the US

  19. EPR and X-ray diffraction investigation of some Greek marbles and limestones

    International Nuclear Information System (INIS)

    Duliu, Octavian; Grecu, Maria Nicoleta; Cristea, Corina

    2009-01-01

    Twelve different marble and limestone samples collected from well-known Greek quarries have been investigated by X-ray diffraction and electron paramagnetic resonance (EPR). X-ray diffraction spectra permitted to determine both major (calcite and dolomite) and minor (quartz or magnesite) mineralogical components. EPR has been used to investigate the same samples unirradiated and after 10 kGy gamma-ray irradiation. The unirradiated samples display typical EPR spectra of Mn 2+ in calcite and dolomite as well as a superposition of these while some samples displayed EPR free radicals signals of centers (low field signal) and centers (high field signal). From X-ray diffraction and EPR spectra it was possible to extract numerical values of several numerical parameters such as dolomite to calcite ratio, EPR intensity parameter, and low field to high field EPR signals intensity ratio. These values as well as the correlation coefficients between the digital functions that described the low field Mn 2+ ions EPR line have been used as entry data for cluster analysis to quantify the resemblance and differences between analyzed samples. (authors)

  20. A REIA Study of Marble Mining Activities in District- Nagaur (Rajasthan

    Directory of Open Access Journals (Sweden)

    Mohammed Arif

    2016-08-01

    Full Text Available Conventional and unscientific mining poses severe threat to life, public property and continuation of mining in the area. Incompatible land uses, huge waste dumps and large scale land transformation have resulted in land degradation, ponding, flooding, water contamination and health hazards in Makrana mining area. Segregation of dumps, compatible land use, research and development activity for use of marble slurry are suggested measures for reclamation and restoration of the degraded land. While for the purpose of development and economic upliftment of people, there is a need for establishment of industrial project, but these have to be environmentally friendly. Therefore it is essential to assess the impacts of mining on different environmental parameters, before starting the mining operations, so that abatement measures could be planned in advance for eco-friendly mining in the area. Environmental impact assessment (EIA is a systematic process that examines the environmental consequences of development action like mining, cement, transport, river valley. EIA systematically examines booth beneficial and adverse consequences of the proposed project and ensures that these impacts are taken into account during the project design.

  1. Analysis of low-marbled Hanwoo cow meat aged with different dry-aging methods

    Directory of Open Access Journals (Sweden)

    Hyun Jung Lee

    2017-12-01

    Full Text Available Objective Different dry-aging methods [traditional dry-aging (TD, simplified dry-aging (SD, and SD in an aging bag (SDB] were compared to investigate the possible use of SD and/or SDB in practical situations. Methods Sirloins from 48 Hanwoo cows were frozen (Control, 2 days postmortem or dry-aged for 28 days using the different aging methods and analyzed for chemical composition, total aerobic bacterial count, shear force, inosine 5′-monophosphate (IMP and free amino acid content, and sensory properties. Results The difference in chemical composition, total aerobic bacterial count, shear force, IMP, and total free amino acid content were negligible among the 3 dry-aged groups. The SD and SDB showed statistically similar tenderness, flavor, and overall acceptability relative to TD. However, SDB had a relatively higher saleable yield. Conclusion Both SD and SDB can successfully substitute for TD. However, SDB would be the best option for simplified dry-aging of low-marbled beef with a relatively high saleable yield.

  2. Modeling habitat for Marbled Murrelets on the Siuslaw National Forest, Oregon, using lidar data

    Science.gov (United States)

    Hagar, Joan C.; Aragon, Ramiro; Haggerty, Patricia; Hollenbeck, Jeff P.

    2018-03-28

    Habitat models using lidar-derived variables that quantify fine-scale variation in vegetation structure can improve the accuracy of occupancy estimates for canopy-dwelling species over models that use variables derived from other remote sensing techniques. However, the ability of models developed at such a fine spatial scale to maintain accuracy at regional or larger spatial scales has not been tested. We tested the transferability of a lidar-based habitat model for the threatened Marbled Murrelet (Brachyramphus marmoratus) between two management districts within a larger regional conservation zone in coastal western Oregon. We compared the performance of the transferred model against models developed with data from the application location. The transferred model had good discrimination (AUC = 0.73) at the application location, and model performance was further improved by fitting the original model with coefficients from the application location dataset (AUC = 0.79). However, the model selection procedure indicated that neither of these transferred models were considered competitive with a model trained on local data. The new model trained on data from the application location resulted in the selection of a slightly different set of lidar metrics from the original model, but both transferred and locally trained models consistently indicated positive relationships between the probability of occupancy and lidar measures of canopy structural complexity. We conclude that while the locally trained model had superior performance for local application, the transferred model could reasonably be applied to the entire conservation zone.

  3. Genetic association of marbling score with intragenic nucleotide variants at selection signals of the bovine genome.

    Science.gov (United States)

    Ryu, J; Lee, C

    2016-04-01

    Selection signals of Korean cattle might be attributed largely to artificial selection for meat quality. Rapidly increased intragenic markers of newly annotated genes in the bovine genome would help overcome limited findings of genetic markers associated with meat quality at the selection signals in a previous study. The present study examined genetic associations of marbling score (MS) with intragenic nucleotide variants at selection signals of Korean cattle. A total of 39 092 nucleotide variants of 407 Korean cattle were utilized in the association analysis. A total of 129 variants were selected within newly annotated genes in the bovine genome. Their genetic associations were analyzed using the mixed model with random polygenic effects based on identical-by-state genetic relationships among animals in order to control for spurious associations produced by population structure. Genetic associations of MS were found (Pdirectional selection for greater MS and remain selection signals in the bovine genome. Further studies of fine mapping would be useful to incorporate favorable alleles in marker-assisted selection for MS of Korean cattle.

  4. Genetic architecture of the marbled goby Pomatoschistus marmoratus (Perciformes, Gobiidae) in the Mediterranean Sea.

    Science.gov (United States)

    Mejri, Randa; Arculeo, Marco; Hassine, Oum Kalthoum Ben; Brutto, Sabrina Lo

    2011-02-01

    The marbled goby Pomatoschistus marmoratus, a species inhabiting coastal Mediterranean lagoons, has been studied by measuring its mitochondrial DNA variation. This analysis revealed a Mediterranean west vs east split and, subsequently, an eastern differentiation among the Libyan-Tunisian Gulf, the Adriatic Sea and the Aegean Sea. The high cohesion between the samples collected in the vast area of western Mediterranean contrasts with the genetic mosaic of the more sub-structured eastern Mediterranean. This western homogeneity can not yet be fully explained even if a human-mediated migratory flow, due to a maritime traffic, has been posited. The pattern in the eastern basin revealed a genetic architecture possibly due to the non-migratory habit of the gobid. Within this perspective, the role of the Mediterranean lagoon habitat should be related to how much it amplifies the effects of historical (e.g. past sea-level changes) and environmental (e.g. present-day hydrographic regime) processes as regards the genetic structure of the inhabiting species. Copyright © 2010 Elsevier Inc. All rights reserved.

  5. La charpente de la nef de la cathédrale de Bourges The structure of the nave in Bourges cathedral

    Directory of Open Access Journals (Sweden)

    Frédéric Epaud

    2012-03-01

    Full Text Available La cathédrale gothique de Bourges a été édifiée en deux campagnes avec le chœur, de 1195 à 1214, puis la nef, de 1225 à 1255, après 10 ans d’interruption du chantier. Ses charpentes d’origine ont été en partie reconstruites sur l’ensemble des collatéraux, suite à un incendie en 1559, et sur la partie médiane du grand vaisseau, entre 1747 et 1754, du fait de la suppression du faux transept et de sa flèche. Le relevé archéologique de la charpente gothique subsistante sur la nef, et l’analyse dendrochronologique de ses bois démontrent que les abattages se sont étalés de 1230 à 1257, avec deux grandes campagnes de coupes de bois entre 1240 et 1244 et en automne-hiver 1254-1255, juste avant la mise en œuvre et le levage de la charpente en 1256 ou peu après. Ces coupes successives supposent un approvisionnement du chantier par des donations de bois ou de parcelles forestières exploitées aussitôt, obligeant à un stockage des bois dans l’attente du chantier. La charpente à chevrons-formant-fermes a été exécutée selon un premier projet qui a été modifié en cours de réalisation pour y insérer un dispositif de contreventement longitudinal, avec une nouvelle structure des fermes principales permettant de le recevoir. Ce contreventement axial est doublé par un second situé dans le plan des chevrons, attesté pour la première fois par la dendrochronologie du milieu du xiiie s. En 1262, les travées orientales de la charpente de la nef sont reprises pour permettre le rajout d’une flèche en bois et d’un faux-transept à l’aplomb de la quatrième travée de voûtes.The Gothic cathedral of Bourges was built in two phases, with the chancel from 1195 to 1214 then the nave from 1225 to 1255, after a 10-year interruption to the building work. The original roof structure was in part reconstructed on all the sides, following a fire in 1559, and on the middle part of the great nave, between 1747 and 1754, due to

  6. Inventories of musical sources. Methodology for the identifi cation of compositions and the establishment of concordances: the case of the inventories of the music chapel of Malaga cathedral (1800-1836 and the works in Spanish by Jaime Balius

    Directory of Open Access Journals (Sweden)

    María José de la Torre Molina

    2018-01-01

    Full Text Available In the course of the first third of the nineteenth century, members of the Capilla de Música of Málaga Cathedral compiled twelve inventories of their possessions. These mostly contain musical compositions to be performed in the so-called “funciones contratadas”, ceremonies organized by patrons other than the Cabildo Catedralicio. The repertoire of the inventories is very varied, including works by composers such as Haydn and Mozart together with many of the foremost Spanish maestros de capilla of the eighteenth and the nineteenth centuries. However, the identification of both composers and compositions is not always easy, nor is the correspondence between the entries in different inventories. The aim of this article is to present some strategies which can be implemented in order to overcome these difficulties. Many of the examples are related to the particular case of works to Spanish texts by Jaime Balius (1750-1822.

  7. The constructive process in the Cimorro zone in the the Cathedral of Avila, (century XII-XIV. Hypothesis and its verification through the analysis of Structural Stability Smart and Sustainable Offices (SSO

    Directory of Open Access Journals (Sweden)

    Mª A. Benito Pradillo

    2018-01-01

    Full Text Available This paper presents a hypothesis about the order in the constructive process for the head zone in the Cathedral of Ávila, called Cimorro. The hypothesis proposed in this area considers for its construction three different stages: XII Century, XIII Century and XIV Century. The proposed hypotesis have been verified with the Analysis of Stability realised. The theoretical Framework used is the Limit Analysis to Masonry Structures. After prooving the Structural Stability for each of the building stages, the following conclusions are made: Through the XII Century, the possibility of closing the central vault without Buttress System for a short period of time and the subsequent placement of a tribune is stated. A fortification formed by the barbican and the «adarves» were built during the XIII Century. In the XIV Century, the tribune is removed and replaced with the Buttress System with buttress and double flying buttress, which we can see nowadays.

  8. Geodermatophilus poikilotrophi sp. nov.: A Multitolerant Actinomycete Isolated from Dolomitic Marble

    Directory of Open Access Journals (Sweden)

    Maria del Carmen Montero-Calasanz

    2014-01-01

    Full Text Available A novel Gram-reaction-positive, aerobic actinobacterium, tolerant to mitomycin C, heavy metals, metalloids, hydrogen peroxide, desiccation, and ionizing- and UV-radiation, designated G18T, was isolated from dolomitic marble collected from outcrops in Samara (Namibia. The growth range was 15–35°C, at pH 5.5–9.5 and in presence of 1% NaCl, forming greenish-black coloured colonies on GYM Streptomyces agar. Chemotaxonomic and molecular characteristics of the isolate matched those described for other representatives of the genus Geodermatophilus. The peptidoglycan contained meso-diaminopimelic acid as diagnostic diaminoacid. The main phospholipids were phosphatidylethanolamine, phosphatidylcholine, phosphatidylinositol, and small amount of diphosphatidylglycerol. MK-9(H4 was the dominant menaquinone and galactose was detected as diagnostic sugar. The major cellular fatty acids were branched-chain saturated acids iso-C16:0 and iso-C15:0 and the unsaturated C17:1ω8c and C16:1ω7c. The 16S rRNA gene showed 97.4–99.1% sequence identity with the other representatives of genus Geodermatophilus. Based on phenotypic results and 16S rRNA gene sequence analysis, strain G18T is proposed to represent a novel species, Geodermatophilus poikilotrophi. Type strain is G18T (= DSM 44209T = CCUG 63018T. The INSDC accession number is HF970583. The novel R software package lethal was used to compute the lethal doses with confidence intervals resulting from tolerance experiments.

  9. Marble wastes and pig slurry improve the environmental and plant-relevant properties of mine tailings.

    Science.gov (United States)

    Kabas, S; Faz, A; Acosta, J A; Arocena, J M; Zornoza, R; Martínez-Martínez, S; Carmona, D M

    2014-02-01

    Poor soil fertility is often the biggest challenge to the establishment of vegetation in mine wastes deposits. We conducted field trials in the El Gorguel and El Lirio sites in SE Spain, two representative tailing ponds of similar properties except for pH, to understand the environmental and plant-relevant benefits of marble waste (MW) and pig slurry (PS) applications to mine tailings. Low pH (5.4) tailings (El Lirio) exhibit reduction of up to fourfold in bio-availability of metals as shown by the DTPA-Zn, Pb, water-soluble Zn, Pb and up to 3× for water-soluble Cd. Tailings in El Gorguel have high pH (7.4) and did not exhibit significant trends in the reductions of water-extractable Zn, Pb, Cd and Cu. Improvements to the edaphic (plant-relevant) properties of tailings after the amendments are not as sensitive to pH compared to the environmental characteristics. The two sites had increases in aggregate stability, organic matter (total N and organic C) although total N is higher in the El Gorguel (up to 212 μg N kg(-1)) than the El Lirio (up to 26 μg N kg(-1)). However, cation exchange capacities are similar in both sites at 15.2 cmol(+) kg(-1). We conclude that the characteristics, especially pH, of tailing materials significantly influence the fate of metals but not improvements to plant-relevant properties such as cation exchange capacity and aggregate stability 1 year after the application of MW and PS amendments.

  10. Photogrammetry in maritime and underwater archaeology: two marble wrecks from Sicily

    Science.gov (United States)

    Balletti, C.; Beltrame, C.; Costa, E.; Guerra, F.; Vernier, P.

    2015-06-01

    Underwater survey, compared to land archaeology, needs some specific techniques, because the application of some active 3D sensor, such as laser scanner, is obviously impossible. The necessity to produce three-dimensional survey, offering the same accuracy of classical terrestrial laserscanning or photogrammetric methods, combined with the request of low costs and rapid solutions, led the researchers to test and apply oftentimes image-based techniques. In the last two years the Ca' Foscari University and University IUAV of Venice are conducting a research on the application of integrated techniques to support underwater metric documentation, comparing them to the manual traditional one. The gained experience (and confirmed by other recently published papers) shows that the actual multiimage digital photogrammetry is a good solution for the underwater archaeology. This approach is useful both from a metric and from a recording point of view, because it achieves high quality results, such as accurate 3D models or 2D representations, offering a complete documentation of underwater sites. But photogrammetry has to be supported by a topographical survey (to acquire ground control points - GCP) to georeference all the finds in the same reference system. This paper presents the integrated survey of two roman shipwrecks, approaching differently in the GCP's acquisition just for the different morphological characteristic of the sites. The wrecks' cargos are huge marble blocks, presenting differences in quantities, layout and depths. Those characteristics determine the choice of the topographic survey. The results of the survey are two 3D polygonal textured models of the sites, which can be easily used for different analyses and reconstructive hypothesis, opening new possibilities of documentation with both specialists and the wider public. Furthermore, 3D models are the geometric base for 2D orthophoto and cross section extraction. The paper will illustrate all the phases

  11. Modeling marbled murrelet (Brachyramphus marmoratus) habitat using LiDAR-derived canopy data

    Science.gov (United States)

    Hagar, Joan C.; Eskelson, Bianca N.I.; Haggerty, Patricia K.; Nelson, S. Kim; Vesely, David G.

    2014-01-01

    LiDAR (Light Detection And Ranging) is an emerging remote-sensing tool that can provide fine-scale data describing vertical complexity of vegetation relevant to species that are responsive to forest structure. We used LiDAR data to estimate occupancy probability for the federally threatened marbled murrelet (Brachyramphus marmoratus) in the Oregon Coast Range of the United States. Our goal was to address the need identified in the Recovery Plan for a more accurate estimate of the availability of nesting habitat by developing occupancy maps based on refined measures of nest-strand structure. We used murrelet occupancy data collected by the Bureau of Land Management Coos Bay District, and canopy metrics calculated from discrete return airborne LiDAR data, to fit a logistic regression model predicting the probability of occupancy. Our final model for stand-level occupancy included distance to coast, and 5 LiDAR-derived variables describing canopy structure. With an area under the curve value (AUC) of 0.74, this model had acceptable discrimination and fair agreement (Cohen's κ = 0.24), especially considering that all sites in our sample were regarded by managers as potential habitat. The LiDAR model provided better discrimination between occupied and unoccupied sites than did a model using variables derived from Gradient Nearest Neighbor maps that were previously reported as important predictors of murrelet occupancy (AUC = 0.64, κ = 0.12). We also evaluated LiDAR metrics at 11 known murrelet nest sites. Two LiDAR-derived variables accurately discriminated nest sites from random sites (average AUC = 0.91). LiDAR provided a means of quantifying 3-dimensional canopy structure with variables that are ecologically relevant to murrelet nesting habitat, and have not been as accurately quantified by other mensuration methods.

  12. Isotopic strontium, carbon and oxygen study on neoproterozoic marbles from Sierra de Umango, Andean Foreland, Argentina

    International Nuclear Information System (INIS)

    Varela, R; Valencio, S.; Ramos, A; Sato, K; Gonzalez, P; Panarello, H; Roverano, D

    2001-01-01

    The Umango Hill (La Rioja Province, 29 o 00'S-68 o 40'W) is one of the mountain blocks of Sierras Pampeanas Occidentales (Caminos, 1979), bounded by thrust faults and surrounded by Upper Devonian to Tertiary marine and continental sedimentites. The exposed crystalline basement is composed of basic igneous rocks and a siliciclastic-limestone sequence, both affected by amphibolite facies metamorphic peak. In the southern area (Juchi creek), the metamorphic complex carries relics of granitic orthogneisses, with Rb/Sr and U/Pb dates of ∼1000 Ma (Varela et al., 1996). These ancient inliers were asigned to a Mesoproterozoic Grenville Orogenic Cycle. Granitic bodies, intrusives at different ages in the Metamorphic Complex, have also been distinguished. The most ancient is El Penon Granite, with 469±9 Ma Rb/Sr age (Varela et al., 2000) and 523±26 Ma U/Pb zircon age (unpublished data). In this way it is possible to point out broadly that the siliciclastic-limestone sequence belongs to the Neoproterozoic-Early Palaeozoic times. It was a platform cover over grenvillian cratonic basement. The metamorphism and deformation, we understand, took place in the Early Palaeozoic, related to the Pampean-Famatinian Orogenic Cycle. In this work, compositional and isotopic data of Strontium ( 87 Sr/ 86 Sr), Carbon (δ 13 Cv PDB ) and Oxygen (δ 18 Ov PDB ) of the marbles derived from the siliciclastic-limestone sequence are presented. The results are interpreted and correlated with the temporal variation curves of 87 Sr/ 86 Sr and δ 13 C from Neoproterozoic marine carbonates (Jacobsen and Kaufman, 1999) (au)

  13. Assessment of natural radioactivity in commercial marble and granite of Espirito Santo state

    International Nuclear Information System (INIS)

    Aquino, Reginaldo Ribeiro de

    2015-01-01

    In this work, the concentrations of natural radionuclides 226 Ra, 232 Th and 40 K in granite and marble samples were determined, considering the main extraction mining of Espirito Santo state, southeastern Brazil. For all study sites, three samples were sealed in 100 ml high density polyethylene bottles. Each sample rested for 4 weeks to reach the secular equilibrium of 238 U and 232 Th series before measured by high resolution gamma spectrometry, and the acquired spectra were analyzed with the software WinnerGamma. The self-absorption correction was considered for all samples, using an expression and method specially developed for this purpose. The concentration of 226 Ra was determined by the weighted arithmetic mean of the concentrations of 214 Pb and 214 Bi, the concentration of 232 Th by the weighted arithmetic mean of the concentrations of 228 Ac, 212 Pb and 212 Bi and the concentration of 40 K by its single 1460 keV transition. The radium equivalent and gamma index were calculated from the activity concentrations of 226 Ra, 232 Th, and 40 K. The emanated radon was measured using an exhalation chamber and the passive detector technique, with a solid state nuclear tracks detectors (SSNTD) being exposed in NRPB/SSI-H dosimeters. During exposure, a commercial detector CR-39® and a national plastic called Durolon® were used, the last was characterized for this purpose using a technique called double exposure and sensitivity intrinsic factor. The characterized plastic was efficient for the application and the calibration factor corresponded to 1.60 ± 0.10 tracks.cm².(kBq.m -3 day) -1 in relation to the CR-39 factor, equivalent to 2.8 ± 0.2 tracks.cm².(kBq.m -3 .day) -1 . The detector showed a higher efficiency at a higher dose. The activities determined by passive detection varyed from 100 ± 10 Bq.m -3 up to 2400 ± 300 Bq.m -3 , highlighting the biggest exhalation rates for granite Ibere Mombasa. Considering the marbles, activity values varyed from 80

  14. Tricky Treats

    Centers for Disease Control (CDC) Podcasts

    2008-08-04

    The Eagle Books are a series of four books that are brought to life by wise animal characters - Mr. Eagle, Miss Rabbit, and Coyote - who engage Rain That Dances and his young friends in the joy of physical activity, eating healthy foods, and learning from their elders about health and diabetes prevention. Tricky Treats shows children the difference between healthy snacks and sweet treats.  Created: 8/4/2008 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 8/5/2008.

  15. Removal of suspended solids and turbidity from marble processing wastewaters by electrocoagulation: Comparison of electrode materials and electrode connection systems

    Energy Technology Data Exchange (ETDEWEB)

    Solak, Murat [Duezce University, Kaynasli Vocational School, Environmental Protection and Control Department, 81900 Duezce (Turkey); Kilic, Mehmet, E-mail: kavi@mmf.sdu.edu.tr [Sueleyman Demirel University, Engineering and Architecture Faculty, Environmental Engineering Department, 32260 Isparta (Turkey); Hueseyin, Yazici; Sencan, Aziz [Sueleyman Demirel University, Engineering and Architecture Faculty, Environmental Engineering Department, 32260 Isparta (Turkey)

    2009-12-15

    In this study, removal of suspended solids (SS) and turbidity from marble processing wastewaters by electrocoagulation (EC) process were investigated by using aluminium (Al) and iron (Fe) electrodes which were run in serial and parallel connection systems. To remove these pollutants from the marble processing wastewater, an EC reactor including monopolar electrodes (Al/Fe) in parallel and serial connection system, was utilized. Optimization of differential operation parameters such as pH, current density, and electrolysis time on SS and turbidity removal were determined in this way. EC process with monopolar Al electrodes in parallel and serial connections carried out at the optimum conditions where the pH value was 9, current density was approximately 15 A/m{sup 2}, and electrolysis time was 2 min resulted in 100% SS removal. Removal efficiencies of EC process for SS with monopolar Fe electrodes in parallel and serial connection were found to be 99.86% and 99.94%, respectively. Optimum parameters for monopolar Fe electrodes in both of the connection types were found to be for pH value as 8, for electrolysis time as 2 min. The optimum current density value for Fe electrodes used in serial and parallel connections was also obtained at 10 and 20 A/m{sup 2}, respectively. Based on the results obtained, it was found that EC process running with each type of the electrodes and the connections was highly effective for the removal of SS and turbidity from marble processing wastewaters, and that operating costs with monopolar Al electrodes in parallel connection were the cheapest than that of the serial connection and all the configurations for Fe electrode.

  16. Removal of suspended solids and turbidity from marble processing wastewaters by electrocoagulation: Comparison of electrode materials and electrode connection systems

    International Nuclear Information System (INIS)

    Solak, Murat; Kilic, Mehmet; Hueseyin, Yazici; Sencan, Aziz

    2009-01-01

    In this study, removal of suspended solids (SS) and turbidity from marble processing wastewaters by electrocoagulation (EC) process were investigated by using aluminium (Al) and iron (Fe) electrodes which were run in serial and parallel connection systems. To remove these pollutants from the marble processing wastewater, an EC reactor including monopolar electrodes (Al/Fe) in parallel and serial connection system, was utilized. Optimization of differential operation parameters such as pH, current density, and electrolysis time on SS and turbidity removal were determined in this way. EC process with monopolar Al electrodes in parallel and serial connections carried out at the optimum conditions where the pH value was 9, current density was approximately 15 A/m 2 , and electrolysis time was 2 min resulted in 100% SS removal. Removal efficiencies of EC process for SS with monopolar Fe electrodes in parallel and serial connection were found to be 99.86% and 99.94%, respectively. Optimum parameters for monopolar Fe electrodes in both of the connection types were found to be for pH value as 8, for electrolysis time as 2 min. The optimum current density value for Fe electrodes used in serial and parallel connections was also obtained at 10 and 20 A/m 2 , respectively. Based on the results obtained, it was found that EC process running with each type of the electrodes and the connections was highly effective for the removal of SS and turbidity from marble processing wastewaters, and that operating costs with monopolar Al electrodes in parallel connection were the cheapest than that of the serial connection and all the configurations for Fe electrode.

  17. Removal of suspended solids and turbidity from marble processing wastewaters by electrocoagulation: comparison of electrode materials and electrode connection systems.

    Science.gov (United States)

    Solak, Murat; Kiliç, Mehmet; Hüseyin, Yazici; Sencan, Aziz

    2009-12-15

    In this study, removal of suspended solids (SS) and turbidity from marble processing wastewaters by electrocoagulation (EC) process were investigated by using aluminium (Al) and iron (Fe) electrodes which were run in serial and parallel connection systems. To remove these pollutants from the marble processing wastewater, an EC reactor including monopolar electrodes (Al/Fe) in parallel and serial connection system, was utilized. Optimization of differential operation parameters such as pH, current density, and electrolysis time on SS and turbidity removal were determined in this way. EC process with monopolar Al electrodes in parallel and serial connections carried out at the optimum conditions where the pH value was 9, current density was approximately 15 A/m(2), and electrolysis time was 2 min resulted in 100% SS removal. Removal efficiencies of EC process for SS with monopolar Fe electrodes in parallel and serial connection were found to be 99.86% and 99.94%, respectively. Optimum parameters for monopolar Fe electrodes in both of the connection types were found to be for pH value as 8, for electrolysis time as 2 min. The optimum current density value for Fe electrodes used in serial and parallel connections was also obtained at 10 and 20 A/m(2), respectively. Based on the results obtained, it was found that EC process running with each type of the electrodes and the connections was highly effective for the removal of SS and turbidity from marble processing wastewaters, and that operating costs with monopolar Al electrodes in parallel connection were the cheapest than that of the serial connection and all the configurations for Fe electrode.

  18. Marble waste and pig manure amendments decrease metal availability, increase soil quality and facilitate vegetation development in bare mine soils

    Science.gov (United States)

    Zornoza, Raúl; Faz, Ángel; Martínez-Martínez, Silvia; Acosta, José A.; Gómez, M. Dolores; Ángeles Muñoz, M.

    2013-04-01

    In order to bring out a functional and sustainable land use in a highly contaminated mine tailing, firstly environmental risks have to be reduced or eliminated by suitable reclamation activities. Tailing ponds pose environmental hazards, such as acidity and toxic metals reaching to waters through wind and water erosions and leaching. As a consequence, soils have no vegetation and low soil organic matter and nutrients. Various physicochemical and biochemical properties, together with exchangeable metals were measured before, 6 months and 12 months after the application of marble waste and pigs manure as reclamation strategy in a tailing pond from SE Spain to reduce hazards for environment and human health. Three months after the last addition of amendments, eight different native shrub species where planted for phytostabilization. Results showed the pH increased up to neutrality. Aggregates stability, organic carbon, total nitrogen, cation exchange capacity, bioavailable phosphorus and potassium, microbial biomass and microbial activity increased with the application of the amendments, while exchangeable metals drastically decreased (~90%). After one year of plantation, only 20% planted species died, with a high growth of survivals reaching flowering and fructification. This study confirms the high effectiveness of initial applications of marble wastes together with pig manure and plantation of shrub species to initialize the recovery of the ecosystem in bare mine soils under Mediterranean semiarid conditions. Key Words: pig manure, marble waste, heavy metals, mine soil. Acknowledgements This work has been funded by the European Union LIFE+ project MIPOLARE (LIFE09 ENV/ES/000439). J.A. Acosta acknowledges a "Saavedra Fajardo" contract from Comunidad Autónoma de Murcia (Spain)

  19. Multi-analytical approach applied to the provenance study of marbles used as covering slabs in the archaeological submerged site of Baia (Naples, Italy): The case of the “Villa con ingresso a protiro”

    International Nuclear Information System (INIS)

    Ricca, Michela; Belfiore, Cristina Maria; Ruffolo, Silvestro Antonio; Barca, Donatella; De Buergo, Monica Alvarez; Crisci, Gino Mirocle; La Russa, Mauro Francesco

    2015-01-01

    Highlights: • Archaeometric investigations of ancient marbles from underwater environment. • Distinguish the different variety of marbles by using minero-petrographic and geochemical-isotopic investigations. • Compare the results with literature data allowing to broaden the existing database. - Abstract: This paper is focused on archaeometric investigations of white marbles taken from the submerged archaeological site of Baia (Naples). The marine area includes the ruins of this ancient Roman city, whose structures range from luxurious maritime villas and imperial buildings with private thermae and tabernae, to more simple and modest houses. Analyses were carried out on fifty marble fragments of covering slabs, belonging to several pavements of the monumental villa, called the Villa con ingresso a protiro, in order to ascertain their provenance. The most distinctive properties of marbles are their variety of textural property especially regarding grain size (MGS), associated with the Mn content and the variation of stable isotopes. These features, supported by the contribution of other variables and studies, establish the basis for the correct identification of the marbles. For this purpose, minero-petrographic and geochemical techniques were used. Results were compared with literature data of white marbles commonly used in antiquity, especially in the Mediterranean basin and showed that a variety of precious marbles from Carrara, Docimium (Afyon), Thasos-D, Aphrodisias, Proconnesos (Marmara), Paros and Pentelicon were used in the ancient roman city of Baia, confirming the importance of the submerged archaeological site and also allowing researchers to broaden the existing database.

  20. Multi-analytical approach applied to the provenance study of marbles used as covering slabs in the archaeological submerged site of Baia (Naples, Italy): The case of the “Villa con ingresso a protiro”

    Energy Technology Data Exchange (ETDEWEB)

    Ricca, Michela, E-mail: michela.ricca@unical.it [Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), University of Calabria, Via Pietro Bucci, 87036 Arcavacata di Rende (CS) (Italy); Belfiore, Cristina Maria [Dipartimento di Scienze Biologiche, Geologiche e Ambientali, University of Catania, Corso Italia 57, 95129 Catania (Italy); Ruffolo, Silvestro Antonio; Barca, Donatella [Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), University of Calabria, Via Pietro Bucci, 87036 Arcavacata di Rende (CS) (Italy); De Buergo, Monica Alvarez [Instituto de Geociencias (CSIC-UCM), Facultad de Ciencias Geológicas, planta 7, despacho 17.4c/José Antonio Nováis 12, 28040 Madrid (Spain); Crisci, Gino Mirocle; La Russa, Mauro Francesco [Dipartimento di Biologia, Ecologia e Scienze della Terra (DiBEST), University of Calabria, Via Pietro Bucci, 87036 Arcavacata di Rende (CS) (Italy)

    2015-12-01

    Highlights: • Archaeometric investigations of ancient marbles from underwater environment. • Distinguish the different variety of marbles by using minero-petrographic and geochemical-isotopic investigations. • Compare the results with literature data allowing to broaden the existing database. - Abstract: This paper is focused on archaeometric investigations of white marbles taken from the submerged archaeological site of Baia (Naples). The marine area includes the ruins of this ancient Roman city, whose structures range from luxurious maritime villas and imperial buildings with private thermae and tabernae, to more simple and modest houses. Analyses were carried out on fifty marble fragments of covering slabs, belonging to several pavements of the monumental villa, called the Villa con ingresso a protiro, in order to ascertain their provenance. The most distinctive properties of marbles are their variety of textural property especially regarding grain size (MGS), associated with the Mn content and the variation of stable isotopes. These features, supported by the contribution of other variables and studies, establish the basis for the correct identification of the marbles. For this purpose, minero-petrographic and geochemical techniques were used. Results were compared with literature data of white marbles commonly used in antiquity, especially in the Mediterranean basin and showed that a variety of precious marbles from Carrara, Docimium (Afyon), Thasos-D, Aphrodisias, Proconnesos (Marmara), Paros and Pentelicon were used in the ancient roman city of Baia, confirming the importance of the submerged archaeological site and also allowing researchers to broaden the existing database.

  1. Complete genome sequence and phylogenetic analyses of an aquabirnavirus isolated from a diseased marbled eel culture in Taiwan.

    Science.gov (United States)

    Wen, Chiu-Ming

    2017-08-01

    An aquabirnavirus was isolated from diseased marbled eels (Anguilla marmorata; MEIPNV1310) with gill haemorrhages and associated mortality. Its genome segment sequences were obtained through next-generation sequencing and compared with published aquabirnavirus sequences. The results indicated that the genome sequence of MEIPNV1310 contains segment A (3099 nucleotides) and segment B (2789 nucleotides). Phylogenetic analysis showed that MEIPNV1310 is closely related to the infectious pancreatic necrosis Ab strain within genogroup II. This genome sequence is beneficial for studying the geographic distribution and evolution of aquabirnaviruses.

  2. Relationship between growth of marbled flounder (Pleuronectes yokohamae) and Cs concentration in their muscle determined by ICP-MS

    International Nuclear Information System (INIS)

    Isoyama, Naohiko; Oikawa, Shinji; Misonoo, Jun

    2008-01-01

    For the purpose of marine environmental radioactivity monitoring, stable Cs and 137 Cs concentrations were obtained from 214 marbled flounder (Pleuronectes yokohamae) samples collected from off the coast of Ibaraki prefecture in Japan in 2005 and 2006. Prior to the investigation, an analytical method for the determination of Cs in muscle of marbled flounder samples by inductively coupled plasma mass spectrometry (ICP-MS) was seriously considered from the view point of sample preparation (wet way) to a Cs measurement. Since major problems in determining Cs by the ICP-MS is the interference of matrix materials and molecular ions on Cs peak area (m/z 133), a known amount of In (m/s 115) was added to the sample solutions as an internal standard. To check the accuracy of the determination, duplication analysis and standard reference materials were used. Analytical results of Cs in muscles samples by ICP-MS agreed well with duplicated samples, and standard reference materials. The standard length and body weight were obtained from a total of 214 flounder samples. The stable Cs, stable K and 137 Cs concentrations in muscle were determined by the ICP-MS, flame photometry and radiochemical analysis, respectively. The mean standard length correlates closely with the mean body weight. The stable Cs concentration was in proportion to the body weight, also, the 137 Cs concentration correlated closely with stable Cs concentration in muscle. On the other hand, a stable K concentration was found to be uniform, and unrelated with 137 Cs and stable Cs concentrations. The specific activities, the ratio of 137 Cs/stable Cs in muscle, was found to be 5.5 - 6.7 with an average of 6.2 ± 0.35 (SD) among five different size groups of the standard length of marbled flounder samples. From these results, ICP-MS provided useful tools for the determination of a trace amount of Cs in muscle samples, combined with wet way pretreatment techniques. In addition, marbled flounder proved to be a

  3. TECTONIC POSITION OF MARBLE MELANGES IN THE EARLY PALEOZOIC ACCRETION-COLLISIONAL SYSTEM OF THE WESTERN PRIBAIKALIE

    Directory of Open Access Journals (Sweden)

    V. S. Fedorovsky

    2014-01-01

    Full Text Available The Early Paleozoic collisional system located in the Olkhon region at the western shores of Lake Baikal resulted from collision of the Siberian paleocontinent and a complex aggregate composed by fragments of a microcontinent, island arcs, back-arc structures and accretionary prisms. The main events were associated with complete manifestation of shear tectogenesis initiated by oblique collision. The current structure includes tectonically displaced components of ancient geodynamic systems that used to have been located dozens and hundreds of kilometres apart. Horizontal amplitudes of tectonic displacement seem to have been quite high; however, numerical data are still lacking to support this conclusion. Information about the structure of the upper crust in the Paleozoic is also lacking as only deep metamorphic rocks (varying from epidote-amphibolite to granulite facies are currently outcropped. Formations comprising the collisional collage are significantly different in composition and protoliths, and combinations of numerous shifted beds give evidence of a 'bulldozer' effect caused by the collisional shock followed by movements of crushed components of the ocean-continent zone along the margin of the Siberian paleocontinent. As evidenced by the recent cross-section, deep horizons of the Early Paleozoic crust comprise the collisional system between the Siberian craton and the Olkhon composite terrain. A permanent inclusion in the collisional combinations of rocks are unusual synmetamorphic injected bodies of carbonate rocks. Such rocks comprise two groups, marble melanges and crustal carbonate melted rocks. Obviously, carbonate rocks (that composed the original layers and horizons of stratified beds can become less viscous to a certain degree at some locations during the process of oblique collision and acquire unusual properties and can thus intrude into the surrounding rocks of silicate composition. Such carbonate rocks behave as protrusions

  4. Systematic revision of the marbled velvet geckos (Oedura marmorata species complex, Diplodactylidae) from the Australian arid and semi-arid zones.

    Science.gov (United States)

    Oliver, Paul M; Doughty, Paul

    2016-03-08

    Lizards restricted to rocky habitats often comprise numerous deeply divergent lineages, reflecting the disjunct nature of their preferred habitat and the capacity of rocky habitats to function as evolutionary refugia. Here we review the systematics and diversity of the predominantly saxicoline Australian marbled velvet geckos (genus Oedura) in the Australian arid and semi-arid zones using newly-gathered morphological data and previously published genetic data. Earlier work showed that four largely allopatric and genetically divergent lineages are present: Western (Pilbara and Gascoyne regions), Gulf (west and south of the Gulf of Carpentaria), Central (central ranges) and Eastern (Cooper and Darling Basins). None of these four populations are conspecific with true O. marmorata, a seperate species complex that is restricted to the Top End region of the Northern Territory. Top End forms share a short, bulbous tail whereas the other four lineages treated here possess a long, tapering tail. Morphological differences among the arid and semi-arid lineages include smaller body size, tapering lamellae and a shorter tail for the Gulf population, and a partially divided rostral scale in the Western population compared to the Central and Eastern populations. Accordingly, we resurrect O. cincta de Vis from synonymy for the Central and Eastern lineages, and regard this species as being comprised of two evolutionary significant units. We also describe the Gulf and Western lineages as new species: Oedura bella sp. nov. and O. fimbria sp. nov., respectively. We note that a predominantly arboreal lineage (the Eastern lineage of O. cincta) is more widely distributed than the other lineages and is phylogenetically nested within a saxicoline clade, but tends to have a deeper head and shorter limbs, consistent with morphological variation observed in other lizard radiations including both saxicoline and arboreal taxa.

  5. Petrology, geochemistry and zirconology of impure calcite marbles from the Precambrian metamorphic basement at the southeastern margin of the North China Craton

    Science.gov (United States)

    Liu, Yi-Can; Zhang, Pin-Gang; Wang, Cheng-Cheng; Groppo, Chiara; Rolfo, Franco; Yang, Yang; Li, Yuan; Deng, Liang-Peng; Song, Biao

    2017-10-01

    Impure calcite marbles from the Precambrian metamorphic basement of the Wuhe Complex, southeastern margin of the North China Craton, provide an exceptional opportunity to understand the depositional processes during the Late Archean and the subsequent Palaeoproterozoic metamorphic evolution of one of the oldest cratons in the world. The studied marbles are characterized by the assemblage calcite + clinopyroxene + plagioclase + K-feldspar + quartz + rutile ± biotite ± white mica. Based on petrography and geochemistry, the marbles can be broadly divided into two main types. The first type (type 1) is rich in REE with a negative Eu anomaly, whereas the second type (type 2) is relatively poor in REE with a positive Eu anomaly. Notably, all marbles exhibit remarkably uniform REE patterns with moderate LREE/HREE fractionation, suggesting a close genetic relationship. Cathodoluminescence imaging, trace elements and mineral inclusions reveal that most zircons from two dated samples display distinct core-rim structures. Zircon cores show typical igneous features with oscillatory growth zoning and high Th/U ratios (mostly in the range 0.3-0.7) and give ages of 2.53 - 2.48 Ga, thus dating the maximum age of deposition of the protolith. Zircon rims overgrew during granulite-facies metamorphism, as evidenced by calcite + clinopyroxene + rutile + plagioclase + quartz inclusions, by Ti-in-zircon temperatures in the range 660-743 °C and by the low Th/U (mostly marbles are ascribed to syn-depositional felsic hydrothermal activity which occurred at 2.53 - 2.48 Ga. Our results, together with other published data and the inferred tectonic setting, suggest that the marbles' protolith is an impure limestone, rich in detrital silicates of igneous origin, deposited in a back-arc basin within an active continental margin during the late Archean and affected by synchronous high-T hydrothermalism at the southeastern margin of the North China Craton.

  6. Reduced satellite cell density and myogenesis in Wagyu compared with Angus cattle as a possible explanation of its high marbling.

    Science.gov (United States)

    Fu, X; Yang, Q; Wang, B; Zhao, J; Zhu, M; Parish, S M; Du, M

    2018-05-01

    Mechanisms responsible for excellent marbling in Japanese black cattle, Wagyu, remain to be established. Because both muscle cells and intramuscular adipocytes are developed from mesenchymal progenitor cells during early muscle development, we hypothesized that intramuscular progenitor cells in Wagyu cattle have attenuated myogenic capacity in favor of adipogenesis, leading to high marbling but reduced muscle growth. Biceps femoris muscle biopsy samples were obtained from both Angus (n=3) and Wagyu (n=3) cattle at 12 months of age. Compared with Angus, the density of satellite cells was much lower in Wagyu muscle (by 45.8±10%, PAngus cattle. Because satellite cells are derived from fetal myogenic cells, the reduction in satellite cell density together with lower muscle fiber formation suggests that myogenesis was attenuated during early muscle development in Wagyu cattle. Given the shared pool of mesenchymal progenitor cells, the attenuated myogenesis likely shifts progenitor cells to adipogenesis during early development, which may contribute to high intramuscular adipocyte formation in Wagyu cattle.

  7. Structural analysis of the Hasan-Robat marbles as traces of folded basement in the Sanandaj-Sirjan Zone, Iran

    Science.gov (United States)

    Nadimi, Alireza

    2015-11-01

    Cherty marbles of Hasan-Robat area, northwest of Isfahan, in the Sanandaj-Sirjan Zone of Iran preserves evidences of multiple deformational events. The Sanandaj-Sirjan Zone is the inner crystalline zone of the Zagros Orogen, which has been highly deformed and exhumed during continental collision between the Arabian Plate and Central Iran. The Hasan-Robat area is an example of the exposed Precambrian-Paleozoic basement rocks that stretched along two NW-SE-trending faults and located in the inner part of the HasanRobat positive flower strcuture. The Hasan-Robat marbles record a complex shortening and shearing history. This lead to the development of disharmonic ptygmatic folds with vertical to sub-vertical axes and some interference patterns of folding that may have been created from deformations during the Pan-African Orogeny and later phases. Based on this research, tectonic evolution of the Hasan-Robat area is interpreted as the product of three major geotectonic events that have been started after Precambrian to Quaternary: (1) old deformation phases (2) contractional movements and (3) strike-slip movements. Different sets and distributions of joints, faults and folds are confirmed with effect of several deformational stages of the area and formation of the flower structure.

  8. SERS- and Electrochemically Active 3D Plasmonic Liquid Marbles for Molecular-Level Spectroelectrochemical Investigation of Microliter Reactions.

    Science.gov (United States)

    Koh, Charlynn Sher Lin; Lee, Hiang Kwee; Phan-Quang, Gia Chuong; Han, Xuemei; Lee, Mian Rong; Yang, Zhe; Ling, Xing Yi

    2017-07-17

    Liquid marbles are emergent microreactors owing to their isolated environment and the flexibility of materials used. Plasmonic liquid marbles (PLMs) are demonstrated as the smallest spectroelectrochemical microliter-scale reactor for concurrent spectro- and electrochemical analyses. The three-dimensional Ag shell of PLMs are exploited as a bifunctional surface-enhanced Raman scattering (SERS) platform and working electrode for redox process modulation. The combination of SERS and electrochemistry (EC) capabilities enables in situ molecular read-out of transient electrochemical species, and elucidate the potential-dependent and multi-step reaction dynamics. The 3D configuration of our PLM-based EC-SERS system exhibits 2-fold and 10-fold superior electrochemical and SERS performance than conventional 2D platforms. The rich molecular-level electrochemical insights and excellent EC-SERS capabilities offered by our 3D spectroelectrochemical system are pertinent in charge transfer processes. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Microchemical Plant in a Liquid Droplet: Plasmonic Liquid Marble for Sequential Reactions and Attomole Detection of Toxin at Microliter Scale.

    Science.gov (United States)

    Han, Xuemei; Koh, Charlynn Sher Lin; Lee, Hiang Kwee; Chew, Wee Shern; Ling, Xing Yi

    2017-11-15

    Miniaturizing the continuous multistep operations of a factory into a microchemical plant offers a safe and cost-effective approach to promote high-throughput screening in drug development and enforcement of industrial/environmental safety. While particle-assembled microdroplets in the form of liquid marble are ideal as microchemical plant, these platforms are mainly restricted to single-step reactions and limited to ex situ reaction monitoring. Herein, we utilize plasmonic liquid marble (PLM), formed by encapsulating liquid droplet with Ag nanocubes, to address these issues and demonstrate it as an ideal microchemical plant to conduct reaction-and-detection sequences on-demand in a nondisruptive manner. Utilizing a two-step azo-dye formation as our model reaction, our microchemical plant allows rapid and efficient diazotization of nitroaniline to form diazonium nitrobenzene, followed by the azo coupling of this intermediate with target aromatic compound to yield azo-dye. These molecular events are tracked in situ via SERS measurement through the plasmonic shell and further verified with in silico investigation. Furthermore, we apply our microchemical plant for ultrasensitive SERS detection and quantification of bisphenol A (BPA) with detection limit down to 10 amol, which is 50 000-fold lower than the BPA safety limit. Together with the protections offered by plasmonic shell against external environments, these collective advantages empower PLM as a multifunctional microchemical plant to facilitate small-volume testing and optimization of processes relevant in industrial and research contexts.

  10. Porosity of natural stone and use of confocal laser scanning microscopy on calcitic marble aged in laboratory

    Directory of Open Access Journals (Sweden)

    Ana Mladenovič

    2008-06-01

    Full Text Available Porosity is one of the key characteristics of natural stone, which influences ondurability as well as functionality of stone as building material. Further, deterioration processes themselves are also characterized by change of porosity. Different direct and indirect techniques can be used for porosity determination. In the following paper overview of these methods, as well as their advantages and disadvantages, is given. Confocal laser scanning microscopy (CLSM is indirect (microscopic technique. Despite its numerous advantages, among which 3D visualizationof pore structure is of major importance, this technique is less known in the area of building materials. An example how CLSM can be applied for qualitative and quantitative evaluation of porosity of calcitic polygonal granoblastic marble is given in this paper. Studied marble has been, despite of its poor durability, often used as building material, especially in the case of claddings. It is shown that thermal hydric factors of deterioration can influence porosity significantly,especially formation of intergranular cracks.This kind of deterioration can be successfully evaluated with use of CLSM method, if samples are suitable prepared and if suitable image analysis tools are developed.

  11. Use of residues proceeding from marbles and granites finishing and manufacturing processes as raw material for structural ceramic

    International Nuclear Information System (INIS)

    Mello, Roberta Monteiro de

    2006-01-01

    In order to decrease environmental impact, caused by mud discarding and clay extraction in the ceramic industry, it was used residual mud from marble and granite companies for structural ceramic. Samples were collected in twelve different marble companies located at the metropolitan region of Sao Paulo. However, only four samples were selected, based on its different characteristics. Clay stone was the raw material chosen to prepare the structural ceramic, considering its high use in this segment. Samples and clay stone were both analysed by the following procedures: granulometric analysis, x-rays fluorescent chemical analysis and x-rays diffraction mineralogical analysis, besides, tests in the samples were conducted following NBR 10004 standards. Once raw materials were characterized, the plasticity test was conducted. Test specimen were molded with different levels of mud, then burned and submitted to technological tests, such as: mechanical resistance, water absorption, porosity, specific gravity and retraction, material dilation before burning process and scanning electron microscopy. The final results have shown the viability of using this kind of mud, and pointed some advantages on its usage, but taking in consideration some previous conditions to be adopted. (author)

  12. The genesis of the ore hosting 'dolomitic marble' in the Bayan Obo deposit, Inner Mongolia, China: constrained by isotopic results

    International Nuclear Information System (INIS)

    Ding Tiping; Tian Shihong; Wang Defang; Jiang Shaoyong; Bai Ruimei

    2003-01-01

    The Bayan Obo Fe-REE-Nb ore deposit, Inner Mongolia, China is a super large REE deposit. This deposit attracts attentions of many geologists and geochemists for its unique geological characters and geotectonic background. However, there are quite a number of controversies on various aspects of its genesis, such as when the ore deposit was formed, where the ore forming materials came from and what conditions and geotectonic environment the deposit was formed. Among them, the genesis of ore bearing 'dolomitic marble' is a focus point of debating. isotopic methods are important tools for study on ore deposits. Therefore, supplemental stable isotope investigation was undertaken in this study to reach more information on the forming conditions of 'dolomitic marble'. The high contents of REE and Nb, the REE distribution pattern, the low initial 87 Sr/ 86 Sr ratio and low δ 30 Si values of trace silica in 'dolomitic marble' all indicate its magmatic origin. The high δ 18 O values of carbonate and silicate minerals, and the relatively high δ 34 S values indicate that this rock had experienced isotopic exchange with sea water, implying their submarine volcanic origin. The δ 13 C values observed in carbonate and silicate minerals can also be explained by carbonatite assimilated by oceanic carbonate. Therefore, based on its isotopic characters, the 'dolomitic marble' is more likely of volcanic carbonatite rock formed during middle Proterozoic era. (authors)

  13. GC/MS in the study of deterioration process of historical monuments: characterization of the black crust formed in the Cathedral of Seville; GC/MS en el estudio del proceso de deterioro de monumentos historicos: caracterizacion de la costra negra presente en la Catedral de Sevilla

    Energy Technology Data Exchange (ETDEWEB)

    Reyes, J. [Programa de Corrosion del Golfo de Mexico. Universidad Autonoma de Campeche. Av. Agustin Melgar s/n, Campeche (Mexico); Hermosin, B.; Saiz J, C. [Instituto de Recursos Naturales y Agrobiologia de Sevilla. Avenida de la Reina Mercedes 10. Sevilla, Espana (Spain)]. e-mail: javreyes@uacam.mx

    2006-07-01

    Here, we present an interesting application of Gas Chromatography/Mass Spectrometry (GC/MS) technique which permitted to differentiate successfully between natural and anthropogenic compounds present in the black crust formed in the Cathedral of Seville. This building, considered as one of the most important historic and cultural European monuments suffers from intense blackening of its outside walls and sculptures due to the interaction with the urban environment. Fragment of black crusts were removed from the Cathedral walls and extraction process with organic solvents was carried out. The aliphatic, aromatic and polar fractions were separated and analyzed using GC/MS. A complex organic composition of the black crusts indicated the accumulative character of the deposition process of atmospheric particles as a function of the time. The presence of high molecular weight n-alkanes, n-fatty acids and natural molecular markers identified during the study were indicative of current biogenic contributions. It was also found an important group of petrogenic molecular markers related with diesel soot emissions from motor engines. The diesel soot and molecular markers were entrapped within the black crust mineral matrix and contribute to the observed blackening of the Seville Cathedral. (Author)

  14. Geochemical and isotope aspects of calcite deposits and calcitic marbles hosts mineralizations, Serra do Carumbe, Vale do Ribeira, Parana state, Brazil

    International Nuclear Information System (INIS)

    Venusso, Gerson Caetano; Andrade e Silva, Antonio C. Gondim de

    2011-01-01

    The calcite deposits and the calcitic marbles hosts occur in Serra do Carumbe, in the Vale do Ribeira region, Parana State, were studied in their geochemical and isotopic aspects viewing the gathering of information about their genesis and economical use. The calcite deposits are constituted by veins and lenses, being three of them concordant and one discordant in relation to the S_0 from the hosting marbles. In these deposits four main types of calcite were recognized: rombohedrical, fibrous, banded and microcrystalline. The calcite reveal themselves having high purity, with CaO concentration above 55.30% and MgO below 0.42%. The lithogeochemical study of the marbles sequence was conducted in various suites revealing an uniformity in their composition, with high values of CaO (above 46.92%) in relation to the MgO values (below 3,37%), what favors their use for cement manufacture, except in sectors that suffered fault influences, where the marbles are impure (siliceous, magnesian, ferruginous and aluminous). Regarding their trace elements content, the hosting calcitic marbles have higher concentrations than the calcite, in the elements Sr, B, Ba and Mg, what makes evident their different formation environments. The δ"1"3C values from calcite range from –9,02 to –12,24 ‰ , referring to PDB, while the values δ"1"8O range from 24,48 to 25,23 ‰, referring to SMOW; meanwhile, for the calcitic marbles, the δ"1"3C values range from –4,03 to 1,42‰ and of δ"1"8O range from 20,71 to 23,00 ‰. The high δ"1"8O values would indicate enrichment referring to the interaction of the calcite's generator fluid with the carbonatic host rock. The δ"1"3C values indicate origin from hydrothermal solution for the calcite, although they would not allow to conclude if their sources would be superficial or profound. As for the hosting calcitic marbles, the isotopic values indicate genesis from pre-cambrian marine limestone. (author)

  15. Lead isotopes and lead shot ingestion in the globally threatened marbled teal (Marmaronetta angustirostris) and white-headed duck (Oxyura leucocephala)

    International Nuclear Information System (INIS)

    Svanberg, Fredrik; Mateo, Rafael; Hillstroem, Lars; Green, Andy J.; Taggart, Mark A.; Raab, Andrea; Meharg, Andy A.

    2006-01-01

    Lead isotope ratios ( 206 Pb/ 207 Pb and 208 Pb/ 207 Pb) and concentrations in the livers and bones of marbled teal and white-headed duck found dead or moribund were determined in order to establish the main lead source in these waterfowl species. Lead concentrations in bone (dry weight) and liver (wet weight) were found to be very high in many of the white-headed ducks (bone: geometric mean = 88.9 ppm, maximum = 419 ppm; liver: geometric mean = 16.8 ppm, maximum = 57.0 ppm). Some of the marbled teal had high lead levels in the bones but liver lead levels were all low (bone: geometric mean = 6.13 ppm, maximum = 112 ppm; liver: geometric mean = 0.581 ppm, maximum = 4.77 ppm). Ingested lead shot were found in 71% of the white-headed duck and 20% of the marbled teal. The 206 Pb/ 207 Pb ratio in livers and bones of white-headed ducks and marbled teals showed no significant differences compared to the ratios obtained from lead shot. The 206 Pb/ 207 Pb ratio in bones of marbled teal ducklings with the highest lead concentrations tended to resemble the ratios of lead shot, which supports our hypothesis that the lead was derived from the hens. We also found that the lead ratios of lead shot and lead ratios described for soils in the area overlapped, but also that the isotopic ratio 206 Pb/ 207 Pb in lead shot used in Spain has a narrow range compared with those used in North America. The principal source of lead in many of these birds was, however, most likely lead shot, as supported by the similar isotopic ratios, high lead concentrations in tissues and evidence of ingested shot

  16. Experimental Study on the Force-Bearing Performance of Masonry Structures with a Marble-Graphite Slide Seismic Isolator at the Foundation

    Directory of Open Access Journals (Sweden)

    Suizi Jia

    2016-11-01

    Full Text Available As part of the search for a seismic isolator for low-rise buildings, this paper proposes a marble-graphite slide seismic isolation system composed of marble-graphite slides, an upper foundation beam, the lower counterpart of the upper beam, and the corresponding stop blocks, with the stop blocks consisting of restrictive screws, positioning plates, nut connectors and stop holes linking the two foundation beams. To provide the desired isolation performance, plain mortar bars can be included at the beam interface to better control the initiating loads for foundation slippage. Tests of low-reversed cyclic loading were performed on four different masonry specimens: a recycled brick wall, a clay brick wall, an integrated recycled brick wall with flay ash blocks sandwiched between, and its clay brick counterpart. The four specimens were provided with marble-graphite slide isolators placed at the foundations. The isolator thickness was 20 mm, and the graphite and the marble served as a lubricant and a bearing, respectively. This paper then analyses all of the specimens in terms of the damage that occurred, the initiating load for slippage, the hysteretic performance, the bearing capacity and the performance of the stop blocks. The results indicate that mortar bars embedded in the marble-graphite slide isolator offer effective control of the initiating load, and the isolation system delivers good hysteretic performance. The stop blocks are capable of withstanding a large-magnitude earthquake and are a good choice for constraining the slippage displacement. Damage or failure of the specimens occurs only when the low-reversed cyclic loading continues after slippage takes place. The design is shown to be an outstanding and flexible seismic scheme for use in low-rise buildings.

  17. Lead isotopes and lead shot ingestion in the globally threatened marbled teal (Marmaronetta angustirostris) and white-headed duck (Oxyura leucocephala)

    Energy Technology Data Exchange (ETDEWEB)

    Svanberg, Fredrik [Department of Environmental Toxicology, Evolutionary Biology Centre, Uppsala University, Norbyvaegen 18A, SE-752 36 Uppsala (Sweden)]. E-mail: fredriksvanberg@hotmail.com; Mateo, Rafael [Instituto de Investigacion en Recursos Cinegeticos, IREC (CSIC-UCLM-JCCM), Ronda de Toledo s/n, 13071 Ciudad Real (Spain); Hillstroem, Lars [Institute of Maths, Natural and Computer Science, University of Gaevle, SE-801 76 Gaevle (Sweden); Green, Andy J. [Wetland Ecology Group, Estacion Biologica de Donana-CSIC, Pabellon del Peru, Avenida Maria Luisa s/n, E-40013 Seville (Spain); Taggart, Mark A. [School of Biological Sciences, University of Aberdeen, Cruickshank Bld, St Machar Dr, Aberdeen, Scotland, AB24 3UU (United Kingdom); Raab, Andrea [School of Biological Sciences, University of Aberdeen, Cruickshank Bld, St Machar Dr, Aberdeen, Scotland, AB24 3UU (United Kingdom); Meharg, Andy A. [School of Biological Sciences, University of Aberdeen, Cruickshank Bld, St Machar Dr, Aberdeen, Scotland, AB24 3UU (United Kingdom)

    2006-11-01

    Lead isotope ratios ({sup 206}Pb/{sup 207}Pb and {sup 208}Pb/{sup 207}Pb) and concentrations in the livers and bones of marbled teal and white-headed duck found dead or moribund were determined in order to establish the main lead source in these waterfowl species. Lead concentrations in bone (dry weight) and liver (wet weight) were found to be very high in many of the white-headed ducks (bone: geometric mean = 88.9 ppm, maximum = 419 ppm; liver: geometric mean = 16.8 ppm, maximum = 57.0 ppm). Some of the marbled teal had high lead levels in the bones but liver lead levels were all low (bone: geometric mean = 6.13 ppm, maximum = 112 ppm; liver: geometric mean = 0.581 ppm, maximum = 4.77 ppm). Ingested lead shot were found in 71% of the white-headed duck and 20% of the marbled teal. The {sup 206}Pb/{sup 207}Pb ratio in livers and bones of white-headed ducks and marbled teals showed no significant differences compared to the ratios obtained from lead shot. The {sup 206}Pb/{sup 207}Pb ratio in bones of marbled teal ducklings with the highest lead concentrations tended to resemble the ratios of lead shot, which supports our hypothesis that the lead was derived from the hens. We also found that the lead ratios of lead shot and lead ratios described for soils in the area overlapped, but also that the isotopic ratio {sup 206}Pb/{sup 207}Pb in lead shot used in Spain has a narrow range compared with those used in North America. The principal source of lead in many of these birds was, however, most likely lead shot, as supported by the similar isotopic ratios, high lead concentrations in tissues and evidence of ingested shot.

  18. Effect of alcohol dehydrogenase 1C (ADH1C genotype on vitamin A restriction and marbling in Korean native steers

    Directory of Open Access Journals (Sweden)

    Dong Qiao Peng

    2017-08-01

    Full Text Available Objective This work was to find the correlation of alcohol dehydrogenase 1C (ADH1C genotype with vitamin A reduction and carcass traits during the vitamin A restriction period. Methods In study 1, 60 Korean native steers were fed a diet (890 IU/kg with 8,000 IU and 0 IU of supplemental premix vitamin A/kg of dry matter (DM for control and treatment group, respectively. The levels of serum vitamin A were analyzed through high preparative performance liquid chromatography, and the ADH1C genotype was analyzed based on polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP; 78.1% TT type, 21.9% TC type; however, CC type was not found. Then, the interaction between ADH1C and carcass traits on the vitamin A restriction was investigated in study 2. A total of 136 Korean native steers were fed a diet that included 930 IU/kg vitamin A of DM. Results Serum vitamin A in treatment was reduced to 112.4 IU/dL in steers with TT type of ADH1C, while for steers with TC type the concentration of serum vitamin A was dropped to 79.5 IU/dL (p<0.1 in study 1. This showed that TC type had the potential to lower serum vitamin A concentration during vitamin A restriction compared to TT type. In study 2 we found that eye muscle area, marbling and carcass weight in Korean native steers with TC type were higher than in steers with TT type (p<0.05. Conclusion The interaction between vitamin A restriction and TC type of ADH1C gene could have the potential of increasing the marbling in Korean native steers. These results indicated that steers with TC type of the ADH1C gene were more sensitive to the change of serum vitamin A than TT types. Furthermore, this finding has the potential to enable a higher marbling score under the condition of vitamin A restriction in Korean native steers.

  19. Tracing high-pressure metamorphism in marbles: Phase relations in high-grade aluminous calcite-dolomite marbles from the Greek Rhodope massif in the system CaO-MgO-Al 2O 3-SiO 2-CO 2 and indications of prior aragonite

    Science.gov (United States)

    Proyer, A.; Mposkos, E.; Baziotis, I.; Hoinkes, G.

    2008-08-01

    Four different types of parageneses of the minerals calcite, dolomite, diopside, forsterite, spinel, amphibole (pargasite), (Ti-)clinohumite and phlogopite were observed in calcite-dolomite marbles collected in the Kimi-Complex of the Rhodope Metamorphic Province (RMP). The presence of former aragonite can be inferred from carbonate inclusions, which, in combination with an analysis of phase relations in the simplified system CaO-MgO-Al 2O 3-SiO 2-CO 2 (CMAS-CO 2) show that the mineral assemblages preserved in these marbles most likely equilibrated at the aragonite-calcite transition, slightly below the coesite stability field, at ca. 720 °C, 25 kbar and aCO 2 ~ 0.01. The thermodynamic model predicts that no matter what activity of CO 2, garnet has to be present in aluminous calcite-dolomite-marble at UHP conditions.

  20. Performance of Spanish white Macael marble exposed to narrow- and medium-range temperature cycling

    Directory of Open Access Journals (Sweden)

    Rodríguez Gordillo, J.

    2010-02-01

    Full Text Available White marble specimens from Macael in the Spanish province of Almeria were exposed to narrow- (50/20 ºC and medium- (100/-20 ºC and 75/-20 ºC range thermal stress cycles. The effects were monitored with ultrasound techniques. Ultrasound velocity declined considerably in samples subjected to 100/-20 ºC cycles, more moderately when the range was 75/-20 ºC and insignificantly when it was narrowed to 50/-20 ºC. All variations were recorded in the first five to seven cycles, with values flattening thereafter. The Schmidt hardness and compression test results concurred with the ultrasound findings. Petrographic and scanning electron microscope (SEM imaging revealed some very superficial granular decohesion in the specimens subjected to forty 100/-20 ºC cycles. The concurrent results from compression testing on the one hand and surface hardness and ultrasound measurements on the other confirmed the validity of the latter two nondestructive techniques (NDT for determining the effects of thermal stress cycling on stone mechanical strength.

    Se aplican ciclos de estrés térmico de medio (100/-20 ºC y 75/-20 ºC y bajo (50/-20 ºC rango sobre probetas de mármol blanco de Macael (Almería, España, y se evalúa ciclo a ciclo su incidencia mediante ultrasonidos. Los resultados indican un considerable descenso de velocidad de los ultrasonidos en las muestras sometidas a estrés de 100/-20 ºC, más moderado en el caso de 75/-20 ºC, poco significativo en el caso de 50/-20 ºC. Las variaciones de velocidad tienen lugar durante los primeros ciclos (5-7, permaneciendo los valores constantes en ciclos posteriores. Los resultados proporcionados por medidas de dureza de Schmidt, y de rotura por compresión uniaxial son coincidentes con los proporcionados por los ultrasonidos. Las imágenes de microscopía petrográfica y electrónica (SEM manifiestan una cierta descohesión granular en zonas muy superficiales de las probetas sometidas a 40 ciclos de

  1. Hydroacoustic signatures of Colorado Riverbed sediments in Marble and Grand Canyons using multibeam sonar

    Science.gov (United States)

    Buscombe, Daniel D.; Grams, Paul E.; Kaplinski, Matthew; Tusso, Robert B.; Rubin, David M.

    2015-01-01

    Characterizing the large-scale sedimentary make-up of heterogeneous riverbeds (Nelson et al., 2014), which consist of a patchwork of sediment types over small scales (less than one to several tens of meters) (Dietrich and Smith, 1984) requires high resolution measurements of sediment grain size. Capturing such variability with conventional physical (e.g. grabs, cores, and dredges) or underwater photographic sampling (Rubin et al., 2007; Buscombe et al., 2014a) would be prohibitively costly and time-consuming. However, characterizing bed sediments using high-frequency (several hundred kilohertz) acoustic backscatter from swath-mapping systems has the potential to provide near complete coverage of the bed (Brown and Blondel, 2009; Brown et al., 2011; Snellen et al., 2013), at resolutions down to a few centimeters, which photographic sampling could not practically achieve within the same time and with the same positional accuracy. In shallow water, the physics of high frequency scattering of sound are relatively poorly understood, therefore acoustic sediment classification are almost always statistical (Snellen et al., 2013). Many such methods proposed to date are designed for characterizing large areas of seabed (Brown and Blondel, 2009; Brown et al., 2011) at relatively poor resolution (tens of meters to several hundred meters) and therefore rely on aggregation of data over scales much larger than the typical scales of sediment patchiness on heterogeneous riverbeds. In response to this need, Buscombe et al. (2014b, 2014c) developed a new statistical method for acoustic sediment classification based on spectral analysis of backscatter. This method is both continuous in coverage and of sufficient resolution (order meter or less) to characterize sediment variability on patchy riverbeds. Here, we apply these methods to multibeam echosounder (MBES) data collected from the bed of the Colorado River in Marble and Grand Canyons. Sediment dynamics on the Colorado River in

  2. Cleaning Of Black Crust From Marble Substrate By Short Free Running μs Nd: YAG Laser

    International Nuclear Information System (INIS)

    Khedr, A.; Harith, M. A.; Pouli, P.; Fotakis, C.

    2009-01-01

    One of the most important aspects in laser cleaning of artworks is the possibility for on-line monitoring the cleaning process. This ensures that the cleaning intervention is satisfactory without any damage to the underlying original surface. In this work it is shown that following and observing the integrated densities of the plumes generated during laser cleaning may be a simple, safe and straightforward methodology to monitor the removal process. A series of experiments on reference marble with simulated thick encrustation were considered to evaluate the plume monitoring technique. Parameters influencing the cleaning process and ablation threshold of the black crust (such as laser fluence, number of pulses etc.) were considered while the results were also evaluated under the microscope. The results of this study will be presented and discussed with the aim to establish accurate and reliable monitoring tools to follow the laser cleaning process.

  3. The study of cyclododecane as a temporary coating for marble by NMR profilometry and FTIR reflectance spectroscopies

    Science.gov (United States)

    Anselmi, C.; Presciutti, F.; Doherty, B.; Brunetti, B. G.; Sgamellotti, A.; Miliani, C.

    2011-07-01

    This contribution focuses on an analytical evaluation of the use of cyclododecane (CDD) (C12H24) as a temporary protective coating for non-porous stone materials of cultural heritage interest. A facile solvent spray application technique for the production of an adherent continuous film has been assessed. The criterion for monitoring the sublimation of the cyclododecane film on marble has been established through the use of non-invasive analytical techniques so as to avoid any interaction with the process under study, where results serve to integrate and enhance knowledge into the use of cyclododecane in this discipline. Research is directed towards testing the applicability of portable infrared reflectance spectroscopy and nuclear magnetic resonance profilometry systems to follow the in-situ behavior of temporary consolidants. In particular, the coupling of two spectroscopic techniques such as IR and NMR has been possible, enabling the descriptions of both the formation of the film and its kinetics of sublimation.

  4. Effect of water temperature on survival of early-life stages of marbled flounder Pseudopleuronectes yokohamae in Tokyo Bay, Japan.

    Science.gov (United States)

    Lee, Jeong-Hoon; Kodama, Keita; Oyama, Masaaki; Shiraishi, Hiroaki; Horiguchi, Toshihiro

    2017-07-01

    We investigated factors that might have disturbed the stock recovery of marbled flounder in Tokyo Bay by focusing on the early life stages. Field surveys in Tokyo Bay from 2006 to 2011 revealed that mature adult biomass increased from 2006 to 2008 and decreased thereafter. Meanwhile, larval and juvenile densities were high in 2006 and 2008 but low in other years. Discrepancies in the yearly trends of these parameters suggest that mortality during life stages between spawning and early larval phases might have affected the abundance of the subsequent life stages. Monthly mean water temperature between January and February, in which hatching and pelagic larvae occur in the bay, was lower in 2006 (8.6 °C) and 2008 (9.6 °C) than was observed in other years (10.4-11.4 °C). Significant negative correlation between water temperature and larval density implies that mortality during pre- and post-larval stages would be higher in warmer winter years (>10 °C). To test this hypothesis, we examined the effects of water temperature on mortality and development in egg and larval stages under controlled laboratory conditions. Hatching rate was high in a water temperature range of 9.2-12.7 °C (66.6-82.5%), whereas it decreased in cooler (3.7% at 5.9 °C) or warmer (33.9% at 14.8 °C) conditions. Meanwhile, days from fertilization to hatching, size of larvae at hatching and survival rate of larvae after 18 d from hatching were monotonically and significantly decreased as water temperature was elevated. Combined evidence of the field and laboratory studies suggests that a warmer reproductive season (>10 °C) might induce mortalities of marbled flounder larvae in Tokyo Bay. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Imidazoline binding sites mediates anticompulsive-like effect of agmatine in marble-burying behavior in mice.

    Science.gov (United States)

    Dixit, Madhura P; Thakre, Prajwal P; Pannase, Akshay S; Aglawe, Manish M; Taksande, Brijesh G; Kotagale, Nandkishor R

    2014-06-05

    Agmatine is a cationic amine formed by decarboxylation of l-arginine by the mitochondrial enzyme arginine decarboxylase and widely distributed in mammalian brain. Although the precise function of endogenous agmatine has been largely remained unclear, its exogenous administration demonstrated beneficial effects in several neurological and psychiatric disorders. This study was planned to examine the role of imidazoline binding sites in the anticompulsive-like effect of agmatine on marble-burying behavior. Agmatine (20 and 40mg/kg, ip), mixed imidazoline I1/α2 agonists clonidine (60µg/kg, ip) and moxonidine (0.25mg/kg, ip), and imidazoline I2 agonist 2- BFI (10mg/kg, ip) showed significant inhibition of marble burying behavior in mice. In combination studies, the anticompulsive-like effect of agmatine (10mg/kg, ip) was significantly potentiated by prior administration of moxonidine (0.25mg/kg, ip) or clonidine (30µg/kg,) or 2-BFI (5mg/kg, ip). Conversely, efaroxan (1mg/kg, ip), an I1 antagonist and idazoxan (0.25mg/kg, ip), an I2 antagonist completely blocked the anticompulsive-like effect of agmatine (10mg/kg, ip). These drugs at doses used here did not influence the basal locomotor activity in experimental animals. These results clearly indicated the involvement of imidazoline binding sites in anti-compulsive-like effect of agmatine. Thus, imidazoline binding sites can be explored further as novel therapeutic target for treatment of anxiety and obsessive compulsive disorders. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Insertion of marble waste in the production chain of glass wool; Insercao do residuo de marmore na cadeia produtiva da la de vidro

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, G.F.; Alves, J.O.; Espinosa, D.C.R.; Tenorio, J.A.S., E-mail: girleyf@gmail.co [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica. Dept. de Engenharia Metalurgica e de Materiais

    2010-07-01

    The work aimed the study of the recycle of the waste from marble cutting, aiming the reuse as partial raw material in the production of glass wool. Glass wool are materials with chemical and mechanical resistance, durability and lightness, and also important thermo-acoustic properties. A mixture of the waste with chemical additives was melted in a laboratory electric furnace using temperature of 1450 deg C. The melted material was directly poured in a water-filled recipient aiming the rapidly cooling. Samples of the produced material were characterized by XRD, SEM and DTA. The results showed that the residue from marble cutting can be inserted into the productive chain of glass wool, providing a decrease in the extraction of mineral resources, a profitable destination for this waste, and a economy for the companies producer of thermo-acoustic insulators. (author)

  7. Analysis of thermal stability of ceramic engobes developed with marble reject; Analise da estabilidade termica de engobes ceramicos desenvolvidos com rejeito de marmore

    Energy Technology Data Exchange (ETDEWEB)

    Carlos, E.M.; Assis, R.B.; Sousa, R.F.; Galvao, A.C.P.; Mendes, J.U.L., E-mail: elionemoura@hotmail.com [Universidade Federal do Rio Grande do Norte (UFRN), RN (Brazil)

    2014-07-01

    Considering the technological growth and technical production in the ceramic industry, ceramic mass formulations were evaluated with addition of marble residue to substitute the quartz for obtaining of engobes. Five formulations were prepared varying the proportions of raw material, sieved at 200 mesh, ball mill homogenised, characterized by fluorescence (FRX) and X-ray diffraction (XRD). Samples were separated from the formulations for thermal analysis (TG / DSC) and dilatometry. The specimens were prepared in uniaxial press (25 Mpa). The FIII and FIV formulations presented satisfactory results, evidencing the potential of replacing quartz by the marble residue in ceramic formulation for engobes, minimizing the environmental impact by the undue discard of waste, reducing costs and increasing the range of raw materials for the coatings industry.

  8. Results from MARBLE DT Experiments on the National Ignition Facility: Implosion of Foam-Filled Capsules for Studying Thermonuclear Burn in the Presence of Heterogeneous Mix

    Science.gov (United States)

    Murphy, T. J.; Douglas, M. R.; Cardenas, T.; Cooley, J. H.; Gunderson, M. A.; Haines, B. M.; Hamilton, C. E.; Kim, Y.; Lee, M. N.; Oertel, J. A.; Olson, R. E.; Randolph, R. B.; Shah, R. C.; Smidt, J. M.

    2017-10-01

    The MARBLE campaign on NIF investigates the effect of heterogeneous mix on thermonuclear burn for comparison to a probability distribution function (PDF) burn model. MARBLE utilizes plastic capsules filled with deuterated plastic foam and tritium gas. The ratio of DT to DD neutron yield is indicative of the degree to which the foam and the gas atomically mix. Platform development experiments have been performed to understand the behavior of the foam and of the gas separately using two types of capsule. The first experiments using deuterated foam and tritium gas have been performed. Results of these experiments, and the implications for our understanding of thermonuclear burn in heterogeneously mixed separated reactant experiments will be discussed. This work is supported by US DOE/NNSA, performed at LANL, operated by LANS LLC under contract DE-AC52-06NA25396.

  9. Attenuation properties of radiation shielding materials such as granite and marble against γ-ray energies between 80 and 1350 keV

    Energy Technology Data Exchange (ETDEWEB)

    Eke, Canel [Akdeniz Univ., Antalya (Turkey). Nuclear Sciences Application and Research Center; Akdeniz Univ., Antalya (Turkey). Div. of Physics Education; Agar, Osman [Akdeniz Univ., Antalya (Turkey). Nuclear Sciences Application and Research Center; Karamanoglu Mehmetbey Univ., Karaman (Turkey). Dept. of Physics; Segebade, Christian [Akdeniz Univ., Antalya (Turkey). Nuclear Sciences Application and Research Center; Boztosun, Ismail [Akdeniz Univ., Antalya (Turkey). Nuclear Sciences Application and Research Center; Akdeniz Univ., Antalya (Turkey). Dept. of Physics

    2017-07-01

    In this study, the γ-ray energy-dependent mass and linear attenuation coefficients of various granite and Turkish marble species have been experimentally obtained. Radionuclides ({sup 133}Ba, {sup 137}Cs, {sup 60}Co and {sup 22}Na) with point geometry were used as γ-ray sources. The absorption capacity of each sample at nine γ-ray energies was measured using a high resolution γ-ray spectrometer equipped with a high purity germanium (HPGe) detector. To obtain the precision of the results (1σ standard deviation of the single value), this procedure was repeated six times for each species of granite and marble, respectively. The energy-dependent mass attenuation coefficient (MAC), linear attenuation coefficient (LAC), the half (HVL) and the tenth value layer (TVL) were calculated following that the MAC and LAC results were compared to the literature values.

  10. Identity, Bipolar Disorder, and the Problem of Self-Narration in Kay Redfield Jamison's An Unquiet Mind and Ellen Forney's Marbles.

    Science.gov (United States)

    Mannon, Bethany Ober

    2018-03-06

    The field of narrative medicine holds that personal narratives about illness have the potential to give illness meaning and to create order out of disparate facets of experience, thereby aiding a patient's treatment and resisting universalizing medical discourse. Two narratives of bipolar disorder, Kay Redfield Jamison's prose memoir An Unquiet Mind (1995) and Ellen Forney's graphic memoir Marbles (2012) challenge these ideas. These writers demonstrate that one result of bipolar disorder is a rupture to their sense of identity, making straightforward and verbal forms of narrative impossible. During periods of relative mood stability, reliable memories of mania or depression are equally impossible. As a result, these memoirists seek to develop sources of self-knowledge other than memory and introspection, long the foundations of personal narrative. Finally, An Unquiet Mind and Marbles return attention to questions of selfhood at a time when scholarship on memoir rejects interpretations of life stories as clear and reliable expressions of identity.

  11. [Effect of population density on enzymatic activity of antioxidative and phenol oxidase systems of imagoes and nymphs of the marble cockroach Nauphoeta cinerea].

    Science.gov (United States)

    Murzagulov, G S; Saltykova, E S; Gaĭfullina, L R; Nikolenko, A G

    2013-01-01

    The work deals with effect of density of population on functional activity of components pf protective system of adult individuals and nymphs of the marble cockroach. The resistance of individuals has been noted to decrease both at individual maintenance and under conditions of overpopulation. Changes in activities of enzymes of antioxidative and phenoloxidase systems are studied ion the insect hemolymph and intestine. Possible consequences of isolation and overpopulation are discussed both for stability and for individual development.

  12. Investigation of the interaction of Greek dolomitic marble with metal aqueous solutions using Rutherford backscattering and X-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Godelitsas, A.; Kokkoris, M.; Misaelides, P.

    2005-01-01

    The interaction of dolomitic marble from Thassos Island (northern Aegean sea, Greece) with Co 2+ -, Cd 2+ -, Pb 2+ - and Cr 3+ - aqueous solutions (metal concentration: 1000 mgL -1 ) was investigated using Rutherford backscattering (RBS) and X-ray photoelectron spectroscopy (XPS). The initial material as well as the interaction products were also characterized by scanning electron microscopy (SEM/EDS), radioisotope induced X-ray fluorescence analysis (RI-XRFA), powder X-ray diffraction (Powder-XRD) and Fourier transform infra-red spectroscopy (FT-IR). The contact time of the samples with the aqueous solutions was one week and took place under ambient temperature. To our knowledge, the sorption of the above mentioned metals with dolomite (CaMg(CO 3 ) 2 ) has not yet been presented in the literature and the only data available concern the adsorption of Ca, Mg and Nd from NaCl solutions. The Thassos island dolomitic marble is a snow-white homogeneous carbonate metamorphic rock, with fine physicochemical and mechanical properties, currently used as natural building stone in many parts of the world (see http://www.thassosmarble.com), This dolomite-bearing material was also extensively used in the past as construction material of many .classical Greek and Roman sculptures and architectural elements; in 301 AD the Roman emperor Diocletian included 'Thassian marble' in the list of the 19 most expensive and important 'marbles' produced in the imperial quarries. Previous literature presented the isotopic analysis(δ 13 C, δ 18 O) and EPR studies (Mn 2+ and Fe 3+ ) of this stone. The obtained results indicated a limited Cd 2+ - and Co 2+ -sorption on the dissolved surface of the carbonate substrate, whereas, under the same experimental conditions, the Pb 2+ - and Cr 3+ -interaction is more intense leading to extended overgrowth of crystalline Pb-carbonates and surface precipitation of amorphous Cr-hydroxides/oxyhydroxides.

  13. Use of flux and morphologic sediment budgets for sandbar monitoring on the Colorado River in Marble Canyon, Arizona

    Science.gov (United States)

    Grams, Paul E.; Buscombe, Daniel D.; Topping, David J.; Hazel, Joseph E.; Kaplinski, Matt

    2015-01-01

    The magnitude and pfattern of streamflow and sediment supply of the Colorado River in Grand Canyon (Figure 1) has been affected by the existence and operations of Glen Canyon Dam since filling of Lake Powell Reservoir began in March 1963. In the subsequent 30 years, fine sediment was scoured from the downstream channel (Topping et al., 2000; Grams et al., 2007), resulting in a decline in the number and size of sandbars in the eastern half of Grand Canyon National Park (Wright et al., 2005; Schmidt et al., 2004). The Glen Canyon Dam Adaptive Management Program (GCDAMP) administered by the U.S. Department of Interior oversees efforts to manage the Colorado River ecosystem downstream from Glen Canyon Dam. One of the goals of the GCDAMP is to maintain and increase the number and size of sandbars in this context of a limited sand supply. Management actions to benefit sandbars have included curtailment of daily streamflow fluctuations, which occur for hydropower generation, and implementation of controlled floods, also called high-flow experiments.Studies of controlled floods, defined as intentional releases that exceed the maximum discharge capacity of the Glen Canyon Dam powerplant, implemented between 1996 and 2008, have demonstrated that these events cause increases in sandbar size throughout Marble and Grand Canyons (Hazel et al., 2010; Schmidt and Grams, 2011; Mueller et al., 2014), although the magnitude of response is spatially variable (Hazel et al., 1999; 2010). Controlled floods may build some sandbars at the expense of erosion of sand from other, upstream, sandbars (Schmidt, 1999). To increase the frequency and effectiveness of sandbar building, the U.S. Department of Interior adopted a “high-flow experimental protocol” to implement controlled floods regularly under conditions of enriched sand supply (U.S. Department of Interior, 2012). Because the supply of sand available to build sandbars has been substantially reduced by Glen Canyon Dam (Topping et al

  14. Restricted gene flow at the micro- and macro-geographical scale in marble trout based on mtDNA and microsatellite polymorphism

    Directory of Open Access Journals (Sweden)

    Patarnello Tomaso

    2011-04-01

    Full Text Available Abstract Background The genetic structure of the marble trout Salmo trutta marmoratus, an endemic salmonid of northern Italy and the Balkan peninsula, was explored at the macro- and micro-scale level using a combination of mitochondrial DNA (mtDNA and microsatellite data. Results Sequence variation in the mitochondrial control region showed the presence of nonindigenous haplotypes indicative of introgression from brown trout into marble trout. This was confirmed using microsatellite markers, which showed a higher introgression at nuclear level. Microsatellite loci revealed a strong genetic differentiation across the geographical range of marble trout, which suggests restricted gene flow both at the micro-geographic (within rivers and macro-geographic (among river systems scale. A pattern of Isolation-by-Distance was found, in which genetic samples were correlated with hydrographic distances. A general West-to-East partition of the microsatellite polymorphism was observed, which was supported by the geographic distribution of mitochondrial haplotypes. Conclusion While introgression at both mitochondrial and nuclear level is unlikely to result from natural migration and might be the consequence of current restocking practices, the pattern of genetic substructuring found at microsatellites has been likely shaped by historical colonization patterns determined by the geological evolution of the hydrographic networks.

  15. Radioactivity measurement of primordial radionuclides in and dose evaluation from marble and glazed tiles used as covering building materials in Turkey

    International Nuclear Information System (INIS)

    Turhan, S.; Varinlioglu, A.

    2012-01-01

    Measurements of the natural radioactivity arising from primordial radionuclides ( 226 Ra, 232 Th and 40 K) in marble and glazed tile samples used covering building materials in Turkey were carried out by gamma-ray spectrometer with a high purity germanium detector. The mean activity concentrations of the 226 Ra, 232 Th and 40 K in marble and glazed tile samples were found as 8.2, 5.5 and 58.1 Bq kg -1 and 81.2, 65.4 and 450.1 Bq kg -1 , respectively. The radiation doses received by occupants of buildings in which the sample marble and glazed tiles might be used are estimated using measured activity concentrations of constituent primordial radionuclides and dose conversion factors evaluated by the European Commission from models of tile use. Results obtained are presented for each radionuclide, analysed and compared with relevant national and international legislation, guidance and report, and with the results obtained from other studies. Results show that the use of such decorative building materials in the construction of domestic homes or workplaces in Turkey is unlikely to lead to any significant radiation exposure to the occupants. (authors)

  16. Utilization of marble from Bejui mine - Currais Novos/RN in ceramic mass; Analise da incorporacao de marmore da mina Brejui - Currais Novos/RN na massa ceramica

    Energy Technology Data Exchange (ETDEWEB)

    Farias, D.S.U. de; Souza, M.M. de; Almeida, A.B.D. de; Lima, T.C. de; Nobrega, L.F.P. de M. [Instituto Federal de Ciencia e Tecnologia do Rio Grande do Norte (IFRN), Natal, RN (Brazil); Mendes, L.B., E-mail: debora_suf_00@hotmail.com [Fundacao de Apoio a Pesquisa do Rio Grande do Norte (FAPERN), Natal RN (Brazil)

    2016-07-01

    Mining in Mine Brejui, in Currais Novos - RN, is related to the extraction of scheelite, however the marble of the region is not fully tapped. Aiming to provide a utility to this carbonate rock very abundant in the Serido region, this work is to evaluate, from its chemical and other tests, the addition of marble in the ceramic mass. For the analysis, the samples were collected, then comminuted and sieved to #200 and, right after, characterized by fluorescence X-ray method (FRX). The results indicate a high concentration of CaO (95%), a flux element, and very low content of Fe{sub 2}O{sub 3} and SO{sub 3} (less than 0.6%). After produced the samples, there were performed the water absorption tests and linear shrinkage, which has indicate satisfactory results and classifying them as porcelain. Therefore, with the significant potential of the marble, other laboratory tests may be performed to analyze its incorporation in the formulation of ceramic bodies, being economically viable and adding proper use and commercial value to the rock. (author)

  17. The Effect of Selected Cleaning Techniques on Berkshire Lee Marble: A Scientific Study at Philadelphia City Hall

    Science.gov (United States)

    Mossotti, Victor G.; Eldeeb, A. Raouf; Fries, Terry L.; Coombs, Mary Jane; Naude, Virginia N.; Soderberg, Lisa; Wheeler, George S.

    2002-01-01

    This report describes a scientific investigation of the effects of eight different cleaning techniques on the Berkshire Lee marble component of the facade of the East Center Pavilion at Philadelphia City Hall; the study was commissioned by the city of Philadelphia. The eight cleaning techniques evaluated in this study were power wash (proprietary gel detergent followed by water rinse under pressure), misting (treatment with potable, nebulized water for 24-36 hours), gommage (proprietary Thomann-Hanry low-pressure, air-driven, small-particle, dry abrasion), combination (gommage followed by misting), Armax (sodium bicarbonate delivered under pressure in a water wash), JOS (dolomite powder delivered in a low-pressure, rotary-vortex water wash), laser (thermal ablation), and dry ice (powdered-dry-ice abrasion delivered under pressure). In our study approximately 160 cores were removed from the building for laboratory analysis. We developed a computer program to analyze scanning-electron-micrograph images for the microscale surface roughness and other morphologic parameters of the stone surface, including the near-surface fracture density of the stone. An analysis of more than 1,100 samples cut from the cores provided a statistical basis for crafting the essential elements of a reduced-form, mixed-kinetics conceptual model that represents the deterioration of calcareous stone in terms of self-organized soiling and erosion patterns. This model, in turn, provided a basis for identifying the variables that are affected by the cleaning techniques and for evaluating the extent to which such variables influence the stability of the stone. The model recognizes three classes of variables that may influence the soiling load on the stone, including such exogenous environmental variables as airborne moisture, pollutant concentrations, and local aerodynamics, and such endogenous stone variables as surface chemistry and microstructure (fracturing, roughness, and so on). This study

  18. Geologic map and upper Paleozoic stratigraphy of the Marble Canyon area, Cottonwood Canyon quadrangle, Death Valley National Park, Inyo County, California

    Science.gov (United States)

    Stone, Paul; Stevens, Calvin H.; Belasky, Paul; Montañez, Isabel P.; Martin, Lauren G.; Wardlaw, Bruce R.; Sandberg, Charles A.; Wan, Elmira; Olson, Holly A.; Priest, Susan S.

    2014-01-01

    This geologic map and pamphlet focus on the stratigraphy, depositional history, and paleogeographic significance of upper Paleozoic rocks exposed in the Marble Canyon area in Death Valley National Park, California. Bedrock exposed in this area is composed of Mississippian to lower Permian (Cisuralian) marine sedimentary rocks and the Jurassic Hunter Mountain Quartz Monzonite. These units are overlain by Tertiary and Quaternary nonmarine sedimentary deposits that include a previously unrecognized tuff to which we tentatively assign an age of late middle Miocene (~12 Ma) based on tephrochronologic analysis, in addition to the previously recognized Pliocene tuff of Mesquite Spring. Mississippian and Pennsylvanian rocks in the Marble Canyon area represent deposition on the western continental shelf of North America. Mississippian limestone units in the area (Tin Mountain, Stone Canyon, and Santa Rosa Hills Limestones) accumulated on the outer part of a broad carbonate platform that extended southwest across Nevada into east-central California. Carbonate sedimentation was interrupted by a major eustatic sea-level fall that has been interpreted to record the onset of late Paleozoic glaciation in southern Gondwana. Following a brief period of Late Mississippian clastic sedimentation (Indian Springs Formation), a rise in eustatic sea level led to establishment of a new carbonate platform that covered most of the area previously occupied by the Mississippian platform. The Pennsylvanian Bird Spring Formation at Marble Canyon makes up the outer platform component of ten third-order (1 to 5 m.y. duration) stratigraphic sequences recently defined for the regional platform succession. The regional paleogeography was fundamentally changed by major tectonic activity along the continental margin beginning in middle early Permian time. As a result, the Pennsylvanian carbonate shelf at Marble Canyon subsided and was disconformably overlain by lower Permian units (Osborne Canyon and

  19. Evaluation of the reliability and durability of some chemical treatments proposed for consolidation of so called-marble decoration used in 19th century cemetery (Hosh Al Basha, Cairo, Egypt

    Directory of Open Access Journals (Sweden)

    dr.Amany Bakr

    2011-01-01

    Full Text Available The conservation of so called-marble ornaments is a very important cultural heritage issue, since this kind of decoration was widely use for casing stone buildings during 19th and beginning of 20th centuries in Egypt. The wide variation of materials and techniques used for imitating natural marble is a really big challenge for conservators. Actually most of so called- marble decorations are subjected to several degradation agents which can lead to the loss of material cohesion mostly caused by alteration phenomena that often produce the detachment of large areas of imitated marble ornaments. Surface consolidation, directed to achieve cohesion and stability, is based on the use of materials with aggregating properties. This study started with characterization of the yellow veined imitated marble stucco used in Hosh Al Basha courtyard dating back to Mohammed Ali's family period (1805-1952 in Egypt. The imitated marble stucco consists of two main layers. The outer finishing layer, yellow paint veined with brown color, composed mainly of yellow zincite (ZnO. Gypsum (CaSO4.2H2O, halite (NaCl and calcite (CaCo3 were detected in this layer also. The mineral composition of the subsurface layer (prime layer shows the presence of gypsum (major mineral, zincite (ZnO, anhydrite (CaSO4 and halite (NaCl were also detected. Two products (Paraloid B-72 and SILRES® BS OH 100 were selected to evaluate their efficiency for consolidation treatments of imitated marble stucco. The selected products were tested under thermal ageing. Polarizing microscope (PLM, scanning electron microscopy with the energy dispersive X-ray (SEM-EDX, X-ray diffraction (XRD, Fourier-transform infrared spectroscopy (FTIR-ATR and colorimetric measurements were used in performing the study

  20. New cleaning strategies based on carbon nanomaterials applied to the deteriorated marble surfaces: A comparative study with enzyme based treatments

    Energy Technology Data Exchange (ETDEWEB)

    Valentini, Federica, E-mail: federica.valentini@uniroma2.it [Dipartimento di Scienze e Tecnologie Chimiche, Universita degli Studi di Roma Tor Vergata, Via della Ricerca Scientifica 1, 00133 Rome (Italy); Diamanti, Alessia; Carbone, M. [Dipartimento di Scienze e Tecnologie Chimiche, Universita degli Studi di Roma Tor Vergata, Via della Ricerca Scientifica 1, 00133 Rome (Italy); Bauer, E.M. [Istituto di Struttura della Materia del Consiglio Nazionale delle Ricerche (ISM-CNR), RM 1, Via Salaria km 29.3, 00015 Monterotondo (Italy); Palleschi, Giuseppe [Dipartimento di Scienze e Tecnologie Chimiche, Universita degli Studi di Roma Tor Vergata, Via della Ricerca Scientifica 1, 00133 Rome (Italy)

    2012-06-01

    Pentelic marbles from Basilica Neptuni in Rome-Italy (27-25 B.C.) show the signs of deterioration phenomena, which can be identified as black crust as well as black and grey patina. The present study has the twofold objective of assessing the entity of the deterioration and proposing new cleaning strategies based on nanotechnologies. The former is achieved by performing optical microscopy, differential interference contrast (DIC), stereomicroscopy, scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX) and infrared Fourier transform spectroscopy (FT-IR) analysis. The second objective of this study, involves different treatments based on a new cleaning strategy with carbon nanomaterials and bio-cleaning (used here for comparison) performed with enzymes, as glucose oxidase (GOD) and lipase. Nanomicelles assembled with functionalised carbon nano-fibres (CNF-COOH) and dispersed in Tween 20 medium show the highest cleaning performances in terms of removal of the black crust, compared with the pristine single-wall carbon nanotubes (SWCNTs) and the enzyme-based cleaning treatments. In particular, in these last two cases, the GOD-based biocleaning is efficient in removing the grey and dark patina, but works slow on the black crust. Finally, the lipase based cleaning approach is efficient in the black patina removal, though at the working temperature of 38 Degree-Sign C.

  1. Reclamation of a mine tailings pond by addition of marble waste and pig slurry for the development of aided phytostabilization

    International Nuclear Information System (INIS)

    Zornoza, R.; Faz, A.; Martínez-Martínez, S.; Acosta, J.A.; Gómez-López, M.D.; Muñoz, M.A.; Sánchez-Medrano, R.; Murcia, F.J.; Fernández Cortés, F.J.; López Martínez, E.; Espín de Gea, A.

    2017-01-01

    Abandoned tailings ponds produce environmental and human health hazards due to the transfer of heavy metals through wind and water erosion or leaching. To reduce these hazards, a reclamation strategy has been developed on a tailings pond based on aided phytostabilization. In 2011 marble mud and pig slurry were applied to the surface of a tailings pond and in the spring of 2012 thirteen native vegetal species were introduced. The evolution of different soil properties and the bio-available fraction of the heavy metals Cd, Pb and Zn were monitored for two years (2012-2013). The results showed that the pH, aggregate stability, organic carbon, total nitrogen and cation exchange capacity increased after the application of the amendments and the growth of vegetation, whilst the bio-available fraction of the heavy metals drastically decreased (90-99%). Thus, the strategy followed proved to be positive for reducing the availability of heavy metals and improving soil quality and fertility. These results are promising in areas with extractive activity of carbonated materials, since the generated waste can be used for the reclamation of soils affected by heavy metals, transforming a residual material into a useful by-product. [es

  2. Natural radioactivity analysis in commercial marble samples of Southeast region in Espirito Santo state, Brazil: preliminary results

    International Nuclear Information System (INIS)

    Aquino, Reginaldo R.; Pecequilo, Brigitte R.S.

    2011-01-01

    The natural radioactivity in commercial marble samples of 6 quarries in 'Cachoeiro do Itapemirim' and 'Castelo' municipalities of the south region of Espirito Santo State, southeast Brazil, was determined from the 226 Ra, 232 Th and 40 K contents. In 'Cachoeiro do Itapemirim' municipality were assessed the localities of 'Alto Moledo', 'Baleeira', 'Alto Gironda' and 'Itaoca' and, in 'Castelo' municipality, was assessed the locality of 'Sao Cristovao'. Three samples of each quarry were sealed in standard 100-mL HDPE polyethylene flasks and stored in order to obtain secular equilibrium in the 238 U and 232 Th series. All samples were measured by high resolution gamma spectrometry after a 30-days ingrowth period. Preliminary results show concentrations varying from 1,0 +- 0,2 Bq.kg-1 to 6,5 +- 0,8 Bq.kg-1 for 226 Ra, from 1,5 +- 1,2 Bq.kg -1 to 3,2 +- 1,7 Bq.kg -1 for 232 Th and from 5 +- 4 Bq.kg -1 to 27 +- 5 Bq.kg -1 for 40 K. (author)

  3. Pulling Marbles from a Bag: Deducing the Regional Impact History of the SPA Basin from Impact Melt Rocks

    Science.gov (United States)

    Cohen, Barbara A.; Coker, R. F.

    2009-01-01

    The South Pole-Aitken (SPA) basin is an important target for absolute age-dating. Vertical and lateral impact mixing ensures that regolith within SPA will contain rock fragments from SPA itself, local impact craters, and faraway giant basins. About 20% of the regolith at any given site is foreign [1, 2], but much of this material will be cold ejecta, not impact melt. We calculated the fraction of contributed impact melt using scaling laws to estimate the amount and provenance of impact melt, demonstrating that SPA melt is the dominant impact melt rock (>70%) likely to be present. We also constructed a statistical model to illustrate how many randomly-selected impact-melt fragments would need to be dated, and with what accuracy, to confidently reproduce the impact history of a site. A detailed impact history becomes recognizable after a few hundred to a thousand randomly-selected marbles, however, it will be useful to have more information (e.g. compositional, mineralogical, remote sensing) to group fragments. These exercises show that SPA melt has a high probability of being present in a scoop sample and that dating of a few hundred to a thousand impact-melt fragments will yield the impact history of the SPA basin.

  4. Removal of Verrucaria nigrescens from Carrara marble artefacts using Nd:YAG lasers: comparison among different pulse durations and wavelengths

    Science.gov (United States)

    Osticioli, I.; Mascalchi, M.; Pinna, D.; Siano, S.

    2015-03-01

    The periodical removal of biodeteriogens is a fundamental need for the preservation of outdoor stone cultural heritage, which is stimulating significant efforts toward the development of low-impact conservation strategies. In the present work, the potential of laser removal of Verrucaria nigrescens Pers. from Carrara marble and the evaluation of the associated biocide effect on the organism residues embedded in the surface texture and through the outer porosities of the stone substrate were investigated. The fundamental wavelength of Nd:YAG laser (1,064 nm), commonly used in stone cleaning, and its second harmonic (532 nm) were comparatively tested. The phenomenology of laser treatments carried out in different irradiation conditions was characterized using optical, epifluorescence, and electron microscopes along with chlorophyll fluorescence with pulsed amplitude-modulated imaging. The results achieved show that 532 nm can provide significant advantages with respect to 1,064 nm. The potential of the latter against the biodeteriogens appears rather limited because of the low optical absorption, whereas the former can allow effective and practicable laser treatments, which disclose a significant application perspective.

  5. Identification of contemporary selection signatures using composite log likelihood and their associations with marbling score in Korean cattle.

    Science.gov (United States)

    Ryu, Jihye; Lee, Chaeyoung

    2014-12-01

    Positive selection not only increases beneficial allele frequency but also causes augmentation of allele frequencies of sequence variants in close proximity. Signals for positive selection were detected by the statistical differences in subsequent allele frequencies. To identify selection signatures in Korean cattle, we applied a composite log-likelihood (CLL)-based method, which calculates a composite likelihood of the allelic frequencies observed across sliding windows of five adjacent loci and compares the value with the critical statistic estimated by 50,000 permutations. Data for a total of 11,799 nucleotide polymorphisms were used with 71 Korean cattle and 209 foreign beef cattle. As a result, 147 signals were identified for Korean cattle based on CLL estimates (P selected. Further genetic association analysis with 41 intragenic variants in the selection signatures with the greatest CLL for each chromosome revealed that marbling score was associated with five variants. Intensive association studies with all the selection signatures identified in this study are required to exclude signals associated with other phenotypes or signals falsely detected and thus to identify genetic markers for meat quality. © 2014 Stichting International Foundation for Animal Genetics.

  6. Report on technical feasibility of underground pumped hydroelectric storage in a marble quarry site in the Northeast United States

    Energy Technology Data Exchange (ETDEWEB)

    Chas. T. Main, Inc.

    1982-03-01

    The technical and economic aspects of constructing a very high head underground hydroelectric pumped storage were examined at a prefeasibility level. Excavation of existing caverns in the West Rutland Vermont marble quarry would be used to construct the underground space. A plant capacity of 1200 MW and 12 h of continuous capacity were chosen as plant operating conditions. The site geology, plant design, and electrical and mechanical equipment required were considered. The study concluded that the cost of the 1200 MW underground pumped storage hydro electric project at this site even with the proposed savings from marketable material amounts to between $581 and $595 per kilowatt of installed capacity on a January 1982 pricing level. System studies performed by the planning group of the New England Power System indicate that the system could economically justify up to about $442 per kilowatt on an energy basis with no credit for capacity. To accommodate the plant with the least expensive pumping energy, a coal and nuclear generation mix of approximately 65% would have to be available before the project becomes feasible. It is not expected that this condition can be met before the year 2000 or beyond. It is therefore concluded that the West Rutland underground pumped storage facility is uneconomic at this time. Several variables however could have marked influence on future planning and should be examined on periodic basis.

  7. Evaluation of Wheel Loaders in Open Pit Marble Quarrying by Using the AHP and Topsis Approaches / Ocena pracy ładowarki na podwoziu kołowym w odkrywkowej kopalni marmuru w oparciu o metody AHP i topsis

    Science.gov (United States)

    Kun, Mete; Topaloǧlu, Şeyda; Malli, Tahir

    2013-03-01

    The marble mining in Turkey has been rising since the early 80's. In relation to that, the marble income has become noticeably bigger than those of other mining sectors. In recent years, marble and natural stone export composes half of the total mine export with a value of two billion dollars. This rapid development observed in marble operation has increased the importance of mining economics, income-expenditure balance and cost analysis. The most important cost elements observed in marble quarrying are machinery and equipment, labor costs and geological structures of the field. The aim of this study is to is to propose a multi-criteria decision making (MCDM) approach to evaluate the wheel loader alternatives and select the best loader under multiple criteria. A two-step methodology based on two MCDM methods, which are namely the Analytic Hierarchy Process (AHP) and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS), are used in the evaluation procedure. More precisely, AHP is applied to determine the relative weights of evaluation criteria and TOPSIS is applied to rank the wheel loader alternatives. The proposed approach also provides a relatively simple and very well suited decision making tool for this type of decision making problems.

  8. Stochastic melting of the marble cake mantle: Evidence from local study of the East Pacific Rise at 12050'N

    International Nuclear Information System (INIS)

    Prinzhofer, A.; Lewin, E.; Allegre, C.J.; Paris-7 Univ., 75

    1989-01-01

    Isotopes (Nd, Sr and Pb) and trace elements (REE, Ba, Sr, Rb) have been measured on a set of basaltic glasses from a restricted area (40x10 km) at 12 0 50'N on the East Pacific Rise. The huge variation of incompatible element concentrations (factor 70 for Ba concentrations), and the variable degrees of correlation between element concentrations cannot be explained by usual models of melting and fractional crystallization. A rough correlation between the Ce/Yb ratio and the isotopic ratios favors a ''source effect'' for the genesis of the glasses. We have developed a model including both partial melting process acting on a heterogeneous mantle source with two components (peridotites and pyroxenites; ''marble cake mantle'' of Allegre and Turcotte) and fractional crystallization. The purpose of this model is not to obtain values of the four parameters involved (degree of melting in the peridotites, in the pyroxenites, proportion of pyroxenites involved in the melting, degree of fractional crystallization) for each analyzed glass, but to model the whole set of glasses by stochastic genesis and sampling of liquids. We have used the stochastic procedure for the four controlled parameters, currently generating 10,000 ''samples''. Our preferred model for this portion of the East Pacific Ridge is obtained with a degree of melting in the peridotites and in the pyroxenites varying uniformly from 6 to 20%, and from 6 to 50% respectively. The degree of mixing between liquids issued from the two sources varies from 0 to 100%, and the degree of fractional crystallization remains small, without noticeable effect on the concentrations, varying from 0 to 6%. (orig.)

  9. Sandbar Response in Marble and Grand Canyons, Arizona, Following the 2008 High-Flow Experiment on the Colorado River

    Science.gov (United States)

    Hazel, Joseph E.; Grams, Paul E.; Schmidt, John C.; Kaplinski, Matt

    2010-01-01

    A 60-hour release of water at 1,203 cubic meters per second (m3/s) from Glen Canyon Dam in March 2008 provided an opportunity to analyze channel-margin response at discharge levels above the normal, diurnally fluctuating releases for hydropower plant operations. We compare measurements at sandbars and associated campsites along the mainstem Colorado River, downstream from Glen Canyon Dam, at 57 locations in Marble and Grand Canyons. Sandbar and main-channel response to the 2008 high-flow experiment (2008 HFE) was documented by measuring bar and bed topography at the study sites before and after the controlled flood and twice more in the following 6 months to examine the persistence of flood-formed deposits. The 2008 HFE caused widespread deposition at elevations above the stage equivalent to a flow rate of 227 m3/s and caused an increase in the area and volume of the high-elevation parts of sandbars, thereby increasing the size of campsite areas. In this study, we differentiate between four response styles, depending on how sediment was distributed throughout each study site. Then, we present the longitudinal pattern relevant to the different response styles and place the site responses in context with two previous high-release experiments conducted in 1996 and 2004. We find that (1) nearly every measured sandbar aggraded above the 227-m3/s water-surface elevation, resulting in sandbars as large or larger than occurred following previous high flows; (2) reaches closest to Glen Canyon Dam were characterized by a greater percentage of sites that incurred net erosion, although the total sand volume in all sediment-flux monitoring reaches was greater following the 2008 HFE than following previous high flows; and (3) longitudinal differences in topographic response in eddies and in the channel suggest a greater and more evenly distributed sediment supply than existed during previous controlled floods from Glen Canyon Dam.

  10. Involvement of nitric oxide in anticompulsive-like effect of agmatine on marble-burying behaviour in mice.

    Science.gov (United States)

    Gawali, Nitin B; Chowdhury, Amrita A; Kothavade, Pankaj S; Bulani, Vipin D; Nagmoti, Dnyaneshwar M; Juvekar, Archana R

    2016-01-05

    In view of the reports that nitric oxide modulates the neurotransmitters implicated in obsessive-compulsive disorder (OCD), patients with OCD exhibit higher plasma nitrate levels, and drugs useful in OCD influence nitric oxide. Agmatine is a polyamine and widely distributed in mammalian brain which interacts with nitrergic systems. Hence, the present study was carried out to understand the involvement of nitrergic systems in the anticompulsive-like effect of agmatine. We used marble-burying behaviour (MBB) of mice as the animal model of OCD, and nitric oxide levels in hippocampus (HC) and cortex homogenate were measured. Results revealed that, agmatine (20 and 40mg/kg, i.p) significantly inhibited the MBB. Intraperitoneal administration of nitric oxide enhancers viz. nitric oxide precursor - l-arginine (l-ARG) (400mg/kg and 800mg/kg) increased MBB as well as brain nitrites levels, whereas treatment with N(G)-nitro-l-arginine methyl ester (l-NAME) neuronal nitric oxide synthase inhibitor (30mg/kg and 50mg/kg, i.p.) and 7-nitroindazole (7-NI) (20mg/kg and 40mg/kg) attenuated MBB and nitrites levels in brain. Further, in combination studies, the anticompulsive-like effect of agmatine (20mg/kg, ip) was exacerbated by prior administration of l-ARG (400mg/kg) and conversely l-NAME (15mg/kg) or 7-NI (10.0mg/kg) attenuated OCD-like behaviour with HC and cortex changes in the levels of NO. None of the above treatment had any significant influence on locomotor activity. In conclusion, Agmatine is effective in ameliorating the compulsive-like behaviour in mice which appears to be related to nitric oxide in brain. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Eclogite-facies metamorphism in impure marble from north Qaidam orogenic belt: Geodynamic implications for early Paleozoic continental-arc collision

    Science.gov (United States)

    Chen, Xin; Xu, Rongke; Schertl, Hans-Peter; Zheng, Youye

    2018-06-01

    In the North Qaidam ultrahigh-pressure (UHP) metamorphic belt, impure marble and interbedded eclogite represent a particular sedimentary provenance and tectonic setting, which have important implications for a controversial problem - the dynamic evolution of early Paleozoic subduction-collision complexes. In this contribution, detailed field work, mineral chemistry, and whole-rock geochemistry are presented for impure marble to provide the first direct evidence for the recycling of carbonate sediments under ultrahigh-pressures during subduction and collision in the Yuka terrane, in the North Qaidam UHP metamorphic belt. According to conventional geothermobarometry, pre-peak subduction to 0.8-1.3 GPa/485-569 °C was followed by peak UHP metamorphism at 2.5-3.3 GPa/567-754 °C and cooling to amphibolite facies conditions at 0.6-0.7 GPa/571-589 °C. U-Pb dating of zircons from impure marble reveals a large group with ages ranging from 441 to 458 Ma (peak at 450 Ma), a smaller group ranging from 770 to 1000 Ma (peak at 780 Ma), and minor >1.8 Ga zircon aged ca. 430 Ma UHP metamorphism. The youngest detrital zircons suggest a maximum depositional age of ca. 442 Ma and a burial rate of ca. 1.0-1.1 cm/yr when combined with P-T conditions and UHP metamorphic age. The REE and trace element patterns of impure marble with positive Sr and U anomalies, negative high field strength elements (Nb, Ta, Zr, Hf, and Ti), and Ce anomalies imply that the marble had a marine limestone precursor. Impure marble intercalated with micaschist and eclogite was similar to limestone and siltstone protoliths deposited in continental fore-arc or arc setting with basic volcanic activity. Therefore, the Yuka terrane most likely evolved in a continental island arc setting during the Paleozoic. These data suggest that metasediments were derived from a mixture of Proterozoic continental crust and juvenile early Paleozoic oceanic and/or island arc crust. In addition, their protoliths were likely

  12. Comparison of pigment cell ultrastructure and organisation in the dermis of marble trout and brown trout, and first description of erythrophore ultrastructure in salmonids.

    Science.gov (United States)

    Djurdjevič, Ida; Kreft, Mateja Erdani; Sušnik Bajec, Simona

    2015-11-01

    Skin pigmentation in animals is an important trait with many functions. The present study focused on two closely related salmonid species, marble trout (Salmo marmoratus) and brown trout (S. trutta), which display an uncommon labyrinthine (marble-like) and spot skin pattern, respectively. To determine the role of chromatophore type in the different formation of skin pigment patterns in the two species, the distribution and ultrastructure of chromatophores was examined with light microscopy and transmission electron microscopy. The presence of three types of chromatophores in trout skin was confirmed: melanophores; xanthophores; and iridophores. In addition, using correlative microscopy, erythrophore ultrastructure in salmonids was described for the first time. Two types of erythrophores are distinguished, both located exclusively in the skin of brown trout: type 1 in black spot skin sections similar to xanthophores; and type 2 with a unique ultrastructure, located only in red spot skin sections. Morphologically, the difference between the light and dark pigmentation of trout skin depends primarily on the position and density of melanophores, in the dark region covering other chromatophores, and in the light region with the iridophores and xanthophores usually exposed. With larger amounts of melanophores, absence of xanthophores and presence of erythrophores type 1 and type L iridophores in the black spot compared with the light regions and the presence of erythrophores type 2 in the red spot, a higher level of pigment cell organisation in the skin of brown trout compared with that of marble trout was demonstrated. Even though the skin regions with chromatophores were well defined, not all the chromatophores were in direct contact, either homophilically or heterophilically, with each other. In addition to short-range interactions, an important role of the cellular environment and long-range interactions between chromatophores in promoting adult pigment pattern

  13. The determination of resistance of marble to thermal and moisture cycles: relevance and limits of the recent European natural stone standard

    Science.gov (United States)

    Bellopede, Rossana; Castelletto, Eleonora; Marini, Paola; Zichella, Lorena

    2015-04-01

    The recent European standard EN 16306:2013 specifies laboratory methodology on the determination of the resistance to thermal and moisture cycling of marble for cladding of building façades. In particular measurements of bowing and flexural strength should be performed before and at the end of the ageing cycles. Bowing is measured on specimens of dimension 30*100*400mm exposed to moisture from beneath and heating (gradually till 80°C) on the upper face. The flexural strength should be measured both on reference and on exposed specimens in order to assess the variation of mechanical properties. Additional non-destructive tests are foreseen but are not compulsory for the standard. Moreover, the Annex A of the EN 16306, contains a guidance of the limit values that could be useful for the building planner for façade panels dimensioning. Different varieties of marble (two from Italy, one from Greece and three from Portugal) have been tested by means of this laboratory ageing test. Non-destructive tests such as the measurements of Ultrasonic Pulse Velocity (UPV), porosity, and water absorption have been executed together with the conventional flexural strength test. Image analysis on thin sections soaked with methylene blue have been analysed to further investigate the correlation between porosity and tendency to bowing. Base on the results obtained, some consideration on the decrease of mechanical resistance and the bowing in relation to the variety of marble tested and the limit values indicated the Annex A of EN 16306 can be drawn. Besides, from the data analysed a deepened discussion has been made. It is known that bowing and rapid strength loss occur in some varieties of marble when used as exterior cladding but further considerations can be made: bowing and flexural strength are correlate and in which way? Often the bowing is related to the decrease of flexural strength but it happens that there is a decrease in the mechanical resistance of the stone also

  14. Investigation of the interaction of Greek dolomitic marble with metal aqueous solutions using rutherford backscattering and X-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Godelitsas, A.; Kokkoris, M.; Misaelides, P.

    2007-01-01

    The interaction of Greek dolomitic marble (from Thassos island, northern Greece) with Co 2+ , Cd 2+ , Pb 2+ and Cr 3+ containing aqueous solutions was studied by characterizing the surface of the solid experimental samples, using a combination of spectroscopic, microscopic, and diffraction techniques (RBS, XPS, SEM-EDS, FT-IR, powder-XRD). The obtained results indicated a considerable Cd 2+ and Co 2+ sorption on the dissolved surface of the carbonate substrate, whereas, under the same experimental conditions, the Pb 2+ and Cr 3+ interaction is more intense leading to extended overgrowth of crystalline Pb 2+ carbonates and massive surface precipitation of amorphous Cr 3+ hydroxide/oxyhydroxide. (author)

  15. Elemental and isotopic (C, O, Sr, Nd) compositions of Late Paleozoic carbonated eclogite and marble from the SW Tianshan UHP belt, NW China: Implications for deep carbon cycle

    Science.gov (United States)

    Zhu, Jianjiang; Zhang, Lifei; Lü, Zeng; Bader, Thomas

    2018-03-01

    Subduction zones are important for understanding of the global carbon cycle from the surface to deep part of the mantle. The processes involved the metamorphism of carbonate-bearing rocks largely control the fate of carbon and contribute to local carbon isotopic heterogeneities of the mantle. In this study, we present petrological and geochemical results for marbles and carbonated eclogites in the Southwestern Tianshan UHP belt, NW China. Marbles are interlayered with coesite-bearing pelitic schists, and have Sr-Nd isotopic values (εNd (T=320Ma) = -3.7 to -8.9, 87Sr/86Sr (i) = 0.7084-0.7089), typical of marine carbonates. The marbles have dispersed low δ18OVSMOW values (ranging from 14 to 29‰) and unaffected carbon isotope (δ13CVPDB = -0.2-3.6‰), possibly due to infiltration of external H2O-rich fluids. Recycling of these marbles into mantle may play a key role in the carbon budget and contributed to the mantle carbon isotope heterogeneity. The carbonated eclogites have high Sr isotopic compositions (87Sr/86Sr (i) = 0.7077-0.7082) and positive εNd (T = 320 Ma) values (from 7.6 to 8.2), indicative of strong seafloor alteration of their protolith. The carbonates in the carbonated eclogites are mainly dolomite (Fe# = 12-43, Fe# = Fe2+/(Fe2+ + Mg)) that were added into oceanic basalts during seafloor alteration and experienced calcite - dolomite - magnesite transformation during the subduction metamorphic process. The uniformly low δ18O values (∼11.44‰) of carbonates in the carbontaed eclogites can be explained by closed-system equilibrium between carbonate and silicate minerals. The low δ13C values (from -3.3 to -7.7‰) of the carbonated eclogites most likely reflect contribution from organic carbon. Recycling of these carbonated eclogites with C isotope similar to typical mantle reservoirs into mantle may have little effect on the mantle carbon isotope heterogeneity.

  16. Morphological differences in the skin of marble trout Salmo marmoratus and of brown trout Salmo trutta

    Directory of Open Access Journals (Sweden)

    Urška Sivka

    2012-07-01

    Full Text Available Despite being genetically very closely related, the marble trout Salmo marmoratus and the brown trout Salmo trutta exhibit marked phenotypic differences, particularly with regard to skin pigmentation. Histological analysis of skin from the head and gill cover of differently aged individuals of the two species was carried out in order to characterize differences in skin structure. The basic structure of skin of the individuals studied corresponded with that described for other salmonids, though the head epidermis was somewhat thicker in S. marmoratus than in S. trutta, thickening with age in both species. Numerous secretory goblet cells and sporadic secretory sacciform cells were observed in the upper and middle part of the epidermis in both species. Melanophores were present in both species only in the dermis, and were bigger in S. marmoratus and present at lower average density than in S. trutta, and more or less constant across all age classes. In adult S. marmoratus with fully established marble pigmentation, light areas at low density with small (i.e. aggregated melanophores were present, while in S. trutta melanophores were more uniformly distributed.

  17. Molybdenite Re-Os dating of Mo-Th-Nb-REE rich marbles: pre-Variscan processes in Moldanubian Variegated Group (Czech Republic

    Directory of Open Access Journals (Sweden)

    Drábek Milan

    2015-06-01

    Full Text Available In an effort to contribute to the discussion concerning the age of rocks of the Moldanubian Variegated Group, we have undertaken Re-Os dating of molybdenite of banded carbonatite-like marbles (CLM from the graphite mine Václav at Bližná (Southern Bohemia, which belong to the metamorphic sequence of this group. The Re-Os model ages for the molybdenites range between 493 and 497 Ma and apparently correspond to the early stages of metamorphism connected with pre-Variscan rift-related tectono-metamorphic events, which affected and recrystallized sedimentary CLM material rich in Mo-Th-Nb-REE. The molybdenite bearing carbonatite like marbles situated in the footwall of Bližná graphite mine have been interpreted as carbonates with a large share of volcano-detritic material derived from contemporaneous primitive alkaline (carbonatite-like volcanism deposited in a shallow marine lagoonal environment. There is no geological evidence for the participation of fluids mobilized from host rocks in the formation of the CLM. Because the Re-Os chronometer in molybdenite is demonstrably stable through later Variscan facies metamorphism, the molybdenite chronometer has not been affected by subsequent thermal overprints associated with the Variscan orogeny.

  18. Golden Jubilee Photos - The cathedrals of matter

    CERN Multimedia

    2004-01-01

    In their day, LEP and its four detectors were the biggest of "big science," both in the size of the detectors and the international collaborations that produced them. Initially each detector had certain measurements in which it excelled, and with later upgrades they all performed well across-the-board. By making overlapping measurements, but using different methods, the results from the four detectors reinforced each other. For detecting the direction and momenta of charged particles with extreme accuracy, the ALEPH detector had at its core a time projection chamber, for years the world's biggest. The experiment also became renowned for its innovative software for visualizing particle collisions. Of the LEP detectors, DELPHI was the most innovative, including what was the world's largest superconducting magnet. One of DELPHI's main strengths was its ability to unambiguously identify many types of charged particles. L3's strong point was accurate measurements of the momenta of electrons and their heavier c...

  19. Treated Effluent Disposal Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Treated non-hazardous and non-radioactive liquid wastes are collected and then disposed of through the systems at the Treated Effluent Disposal Facility (TEDF). More...

  20. Location of quarries of non traditional stony materials in the architecture of Madrid: the Crypt of the Cathedral of Santa María la Real de la Almudena

    Directory of Open Access Journals (Sweden)

    Gómez-Heras, M.

    2004-06-01

    Full Text Available The combination between petrological data and historical documentation sources is necessary to establish an accurate methodology for the location of the original quarries of the stony materials used in a determinate historical building. The petrographical and petrophisical data correlation combined with a multivariate statistical analysis, by means of similarity indexes of both the materials in the building and the probable source geological formations, allows the location even when the documental sources would he incomplete or lost, or when the source areas would be modified. The works of location of original quarries used in architectural heritage are important since they allow improving the works of restoration on a building by means of the possibility of using identical materials for substitution or reintegration of decayed elements. The establishment of the original areas also offers the possibility of obtaining unaltered semipiés to evaluate the state and processes of decay of the building as well as to use this rough material to test the effectivity and durability of protective arid consolidant treatments in the building and monuments. The aim of this work has been to characterize and to locate the origin of the stony material in the stonework of the Crypt of the Cathedral of Santa María la Real de la Almudena (Madrid. These stone types came from quarries located in Viana de Jadraque (Guadalajara, Spain and in the central area of Portugal. These materials do not correspond with the traditional ones used in the city of Madrid and its presence is due to the opening of new ways of transport in the second half of the 19"' centuiy.

    Para establecer una metodología adecuada con el fin de localizar las canteras originales de los materiales pétreos de construcción utilizados en un determinado edificio histórico se necesita combinar datos petrológicos y fuentes de documentación histórica. La correlación de los datos petrogr