WorldWideScience

Sample records for cassava starch incorporation

  1. Cassava Starch Edible Film Incorporated with Lemongrass Oil: Characteristics and Application

    Directory of Open Access Journals (Sweden)

    Muhammad Dani Supardan

    2016-04-01

    Full Text Available The objective of this research is to evaluate the effect of the addition of lemongrass essential oil (LGO on the characteristics and antimicrobial properties of cassava starch based films. Edible films were prepared from a mixture of cassava starch and glycerol. LGO was added to edible films as natural antimicrobial agent. There was a reduction in tensile strength of edible film because of incorporation of LGO. The presence of LGO also caused to a reduction in roughness of the edible film. The experimental results showed that Trichoderma and Penicillium was not appear upon the film until the third day of incubation. Meanwhile, the use of edible films containing LGO as antimicrobial agents caused to a reduction in microbial counts of meat during storage.

  2. Cassava starch edible coating incorporated with propolis on bioactive compounds in strawberries

    Directory of Open Access Journals (Sweden)

    Ariela Betsy Thomas

    2016-02-01

    Full Text Available ABSTRACT Strawberry is a fruit appreciated throughout the world due to its attractive quality attributes and stands out due to its high phenolic compound content, which positively contribute to biological properties of nutritional interest. The objective of this study was to evaluate the effect of cassava starch coatings incorporated with propolis combinations on the phytochemical content and the maintenance and increase of the strawberry antioxidant activity. The treatments were 3% cassava starch (CS, 3% cassava starch + 33% ethanolic propolis extract (CS + P33%, 3% cassava starch + 66% ethanolic propolis extract (CS + P66% and control (C. The fruits were stored at 4 °C ± 0.5 ºC and 90%RH for 16 days, making up a completely randomized design with 4 treatments and 5 time evaluations. Vitamin C, phenolic compound, anthocyanin, and antioxidant activity levels were evaluated through two methods. The coating with 66% of propolis promoted higher Vitamin C content than fruits submitted to the other treatments at 8 and 12 days of storage. For antioxidant activity, fruits treated with CS maintained a higher FRS percentage (free radical scavenging at all time evaluations. Control fruits presented higher anthocyanin content at the last evaluation time when the highest antioxidant capacity, by the ABTS method (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid, was observed in fruits with CS and CS + P66% treatments. There was an increase tendency of the phenolic content during storage in all evaluated fruits. The propolis concentrations used, however, were not sufficient to increase or maintain the antioxidant capacity and phenolic contents of strawberries.

  3. Development and characterization of cassava starch films incorporated with blueberry pomace.

    Science.gov (United States)

    Luchese, Cláudia Leites; Garrido, Tania; Spada, Jordana Corralo; Tessaro, Isabel Cristina; de la Caba, Koro

    2017-08-18

    This work is focused on the development of renewable and biodegradable films by the valorisation of wastes from food processing industries, with the aim of contributing to the development of more sustainable films. In this context, different contents of blueberry pomace (BP) were incorporated into cassava starch (CS) film forming solutions and the functional properties of the films prepared by solution casting were investigated, specifically, thermal, optical and physicochemical properties. BP-incorporated films showed good barrier properties against light, indicating their beneficial effect to prevent food deterioration caused by UV radiation when these films are used for food packaging applications. These results were related to the presence of aromatic compounds in BP, which can absorb light at wavelengths below 300nm. Furthermore, all films maintained their structural integrity after immersion in water (24h) and the maximum swelling displayed was lower than 300%. Additionally, the release of active compounds from BP into food simulants (after 10days) showed higher migration into the acetic acid medium in comparison with the ethanol medium. Therefore, the incorporation of BP into CS film forming solution resulted in the improvement of film performance, suggesting the potential application of these films as active packaging. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Effect of cassava starch-based edible coating incorporated with lemongrass essential oil on the quality of papaya MJ9

    Science.gov (United States)

    Praseptiangga, D.; Utami, R.; Khasanah, L. U.; Evirananda, I. P.; Kawiji

    2017-02-01

    Edible films and coatings have emerged as an alternative packaging in food applications and have received much attention due to their advantages. The incorporation of essential oils in film matrices to give antimicrobial properties had been observed recently, and could be used as promising preservation technology. In this study, cassava starch-based edible coating incorporated with lemongrass essential oil (1%) was applied by spraying and dipping methods to preserve papaya MJ9 during storage at room temperature. The quality of papaya MJ9 was analyzed based on its physicochemical and microbiological properties. The addition of lemongrass essential oil (1%) significantly inhibited the microbial growth on papaya MJ9 by reducing the value of total yeast and mold as compared to the control. This study also showed that for parameters of weight loss, total soluble solid, vitamin C, and total titratable acid, papaya MJ9 with cassava starch-based edible coating incorporated with lemongrass essential oil (1%) had the lower values than control, however, they had the higher value than control on firmness parameter. These results indicate that cassava starch-based edible coating incorporated with lemongrass essential oil (1%) can be used as an alternative preservation for papaya MJ9.

  5. Cassava and corn starch in maltodextrin production

    OpenAIRE

    Geovana Rocha Plácido Moore; Luciana Rodrigues do Canto; Edna Regina Amante; Valdir Soldi

    2005-01-01

    Maltodextrin was produced from cassava and corn starch by enzymatic hydrolysis with alpha-amylase. The cassava starch hydrolysis rate was higher than that of corn starches in maltodextrin production with shorter dextrose equivalent (DE). DE values do not show directly the nature of the obtained oligosaccharides. Maltodextrin produced from cassava and corn starch was analysed by high performance liquid chromatography (HPLC), and the analysis showed that maltodextrin production differs accordin...

  6. Properties and antioxidant action of actives cassava starch films incorporated with green tea and palm oil extracts.

    Directory of Open Access Journals (Sweden)

    Kátya Karine Nery Carneiro Lins Perazzo

    Full Text Available There is an interest in the development of an antioxidant packaging fully biodegradable to increase the shelf life of food products. An active film from cassava starch bio-based, incorporated with aqueous green tea extract and oil palm colorant was developed packaging. The effects of additives on the film properties were determined by measuring mechanical, barrier and thermal properties using a response surface methodology design experiment. The bio-based films were used to pack butter (maintained for 45 days under accelerated oxidation conditions. The antioxidant action of the active films was evaluated by analyzing the peroxide index, total carotenoids, and total polyphenol. The same analysis also evaluated unpacked butter, packed in films without additives and butter packed in LDPE films, as controls. The results suggested that incorporation of the antioxidants extracts tensile strength and water vapor barrier properties (15 times lower compared to control without additives. A lower peroxide index (231.57%, which was significantly different from that of the control (p<0.05, was detected in products packed in film formulations containing average concentration of green tea extracts and high concentration of colorant. However, it was found that the high content of polyphenols in green tea extract can be acted as a pro-oxidant agent, which suggests that the use of high concentration should be avoided as additives for films. These results support the applicability of a green tea extract and oil palm carotenoics colorant in starch films totally biodegradable and the use of these materials in active packaging of the fatty products.

  7. Cassava starch in the Brazilian food industry

    Directory of Open Access Journals (Sweden)

    Ivo Mottin Demiate

    2011-06-01

    Full Text Available Cassava starch is a valued raw material for producing many kinds of modified starches for food applications. Its physicochemical properties, as well as its availability, have made it an interesting and challenging ingredient for the food industry. In the present work, food grade modified cassava starches were purchased from producers and analyzed for selected physicochemical characteristics. Samples of sour cassava starch were included, as well as one sample of native cassava starch. Results showed that almost all modified starches were resistant to syneresis, produced pastes more stable to stirred cooking, and some of them were difficult to cook. The sour cassava starches presented high acidity and resulted in clear and unstable pastes during stirred cooking, susceptible to syneresis.

  8. Cassava and corn starch in maltodextrin production

    Directory of Open Access Journals (Sweden)

    Geovana Rocha Plácido Moore

    2005-08-01

    Full Text Available Maltodextrin was produced from cassava and corn starch by enzymatic hydrolysis with alpha-amylase. The cassava starch hydrolysis rate was higher than that of corn starches in maltodextrin production with shorter dextrose equivalent (DE. DE values do not show directly the nature of the obtained oligosaccharides. Maltodextrin produced from cassava and corn starch was analysed by high performance liquid chromatography (HPLC, and the analysis showed that maltodextrin production differs according to the source of the starch. This is important in defining the application of the maltodextrin, according to its desired function.

  9. Genetic modification of cassava enhances starch production

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Recently, a field test of transgenic cassava (Manihot esculenta Crantz) for enhanced starch production by the Shanghai Institute of Plant Physiology & Ecology (SIPPE), the CAS Shanghai Institutes for Biological Sciences, proved successful. Through application of transgenic technologies in cassava, the starch quality of this tropical root crop was largely improved. The new cassava cultivars are believed to have a tremendous potential for industrial application in the future.

  10. Properties of baked foams from citric acid modified cassava starch and native cassava starch blends.

    Science.gov (United States)

    Pornsuksomboon, Kanlaya; Holló, Berta Barta; Szécsényi, Katalin Mészáros; Kaewtatip, Kaewta

    2016-01-20

    Starch foams from native cassava starch (NS) and citric acid modified cassava starch (CNS) were prepared using baking processes with blend ratios of 80/20, 60/40, 50/50, 40/60 and 20/80. The density, thickness, morphology, thermal stability and water absorption of the NS, CNS and blended starch foams were determined. The ratio of the two starch components had a significant influence on the density and thickness of the blended starch foams. All blended starch foams showed good water resistance. Moreover, the morphology of the blended starch foam with the NS/CNS ratio of 50/50 showed a more ordered distribution of cell sizes with thicker cell walls than for the NS and CNS foams. The thermal stability of the blended starch foams was somewhat lower than the stability of the NS foam but not to the extent that it affected any potential practical applications.

  11. A Comparative Study of Some Properties of Cassava and Tree Cassava Starch Films

    Science.gov (United States)

    Belibi, P. C.; Daou, T. J.; Ndjaka, J. M. B.; Nsom, B.; Michelin, L.; Durand, B.

    Cassava and tree cassava starch films plasticized with glycerol were produced by casting method. Different glycerol contents (30, 35, 40 and 45 wt. % on starch dry basis) were used and the resulting films were fully characterized. Their water barrier and mechanical properties were compared. While increasing glycerol concentration, moisture content, water solubility, water vapour permeability, tensile strength, percent elongation at break and Young's modulus decreased for both cassava and tree cassava films. Tree cassava films presented better values of water vapour permeability, water solubility and percent elongation at break compared to those of cassava films, regardless of the glycerol content.

  12. Anaerobic digestion of cassava starch factory effluent.

    Science.gov (United States)

    Manilal, V B; Narayanan, C S; Balagopalan, C

    1990-06-01

    Biomethanation of cassava starch factory effluent in a batch digester produced 130 l biogas/kg dry matter with an average melthane content of 59%. About 63% COD was removed during 60 days. In semicontinuous digesters, gas production was 3251/kg dry matter with a retention time of 33,3 days giving a COD reduction of 50%. Size of starter inoculum was important for good biogasification of the effluent.

  13. Study on the Rheological Property of Cassava Starch Adhesives

    Directory of Open Access Journals (Sweden)

    Junjun Liu

    2014-03-01

    Full Text Available The main goal of this study was to use cassava starch in the production of environmentally sound adhesives. ‘Three-formaldehyde glue’ pollutes the environment and harms to human health strongly, which widely used for wood-based panels preparation. Environment-friendly cassava starch adhesives were prepared using method of oxidation-gelatinization, insteading of the three formaldehyde glue. The effects of the quality ratio of starch and water, temperature and shear rate on the apparent viscosity of the adhesive were studied. The rheological eigenvalue of apparent viscosity was studied through nonlinear regression. The results showed that the apparent viscosity of cassava starch adhesives decreased with the increasing of temperature; the apparent viscosity decreased slowly with the increasing of rotor speed; the phenomenon of shear thinning appeared within cassava starch adhesives which was pseudo-plastic fluids. Cassava starch adhesives with characteristics of non-toxic, no smell and pollution could be applied in interior and upscale packaging.

  14. Effect of waxy rice flour and cassava starch on freeze-thaw stability of rice starch gels.

    Science.gov (United States)

    Charoenrein, Sanguansri; Preechathammawong, Nutsuda

    2012-10-01

    Repeatedly frozen and thawed rice starch gel affects quality. This study investigated how incorporating waxy rice flour (WF) and cassava starch (CS) in rice starch gel affects factors used to measure quality. When rice starch gels containing 0-2% WF and CS were subjected to 5 freeze-thaw cycles, both WF and CS reduced the syneresis in first few cycles. However CS was more effective in reducing syneresis than WF. The different composite arrangement of rice starch with WF or CS caused different mechanisms associated with the rice starch gel retardation of retrogradation, reduced the spongy structure and lowered syneresis. Both swollen granules of rice starch and CS caused an increase in the hardness of the unfrozen and freeze-thawed starch gel while highly swollen WF granules caused softer gels. These results suggested that WF and CS were effective in preserving quality in frozen rice starch based products.

  15. Polymorphism of starch pathway genes in cassava.

    Science.gov (United States)

    Vasconcelos, L M; Brito, A C; Carmo, C D; Oliveira, E J

    2016-12-02

    The distribution and frequency of single nucleotide polymorphisms (SNPs) can help to understand changes associated with characteristics of interest. We aimed to evaluate nucleotide diversity in six genes involved in starch biosynthesis in cassava using a panel of 96 unrelated accessions. The genes were sequenced, aligned, and used to obtain values for nucleotide diversity (π), segregating sites (θ), Tajima's D test, and neighbor-joining (NJ) clustering. On average, one SNP per 147 and 171 bp was identified in exon and intron regions, respectively. Thirteen heterozygous loci were found. Three of seven SNPs in the exon region resulted in non-synonymous replacement or four synonymous substitutions. However, no associations were noted between SNPs and root dry-matter content. The parameter π ranged from 0.0001 (granule bound starch synthase I) to 0.0033 (α-amylase), averaging 0.0011, while θ ranged from 0.00014 (starch branching enzyme) to 0.00584 (starch synthase I), averaging 0.002353. The θ diversity value was typically double that of the π. Results of the D test did not suggest any evidence of deviance of neutrality in these genes. Among the evaluated accession, 82/96 were clustered using the NJ method but without a clear separation of the root dry-matter content, root pulp coloration, and classification of the cyanogenic compound content. High variation in genes of the starch biosynthetic pathway can be used to identify associations with the functional properties of starch for the use of polymorphisms for selection purposes.

  16. Characterization of cassava starch attributes of different genotypes

    NARCIS (Netherlands)

    Anggraini, V.; Sudarmonowati, E.; Hartati, N.Sri.; Suurs, L.C.J.M.; Visser, R.G.F.

    2009-01-01

    The genetic variation of starch of Indonesian cassava genotypes with various morphological characteristics of roots and eco-geographical origin was characterized and compared. The morphological characteristics of the roots of 71 collected cassava genotypes were classified into yellow and white for

  17. COORDINATION OF CASSAVA STARCH TO METAL IONS AND ...

    African Journals Online (AJOL)

    a

    Soc. Ethiop. 2003, 17(2), 155-165. ISSN 1011-3924 ... Cassava starch formed Werner-type complexes with ions of metals from the transition groups. This was proven by conductivity and electron paramagnetic resonance measurements.

  18. Electrical and absorption properties of fresh cassava tubers and cassava starch

    Science.gov (United States)

    Harnsoongnoen, S.; Siritaratiwat, A.

    2015-09-01

    The objective of this study was to analyze the electrical and absorption properties of fresh cassava tubers and cassava starch at various frequencies using electric impedance spectroscopy and near-infrared spectroscopy, as well as determine the classification of the electrical parameters of both materials using the principle component analysis (PCA) method. All samples were measured at room temperature. The electrical and absorption parameters consisted of dielectric constant, dissipation factor, parallel capacitance, resistance, reactance, impedance and absorbance. It was found that the electrical and absorption properties of fresh cassava tubers and cassava starch were a function of frequency, and there were significant differences between the materials. The dielectric constant, parallel capacitance, resistance and impedance of fresh cassava tubers and cassava starch had similar dramatic decreases with increasing frequency. However, the reactance of both materials increased with an increasing frequency. The electrical parameters of both materials could be classified into two groups. Moreover, the dissipation factor and phase of impedance were the parameters that could be used in the separation of both materials. According to the absorbance patterns of the fresh cassava tubers and cassava starch, there were significant differences.

  19. High pressure intensification of cassava resistant starch (RS3) yields

    OpenAIRE

    2015-01-01

    Cassava starch, typically, has resistant starch type 3 (RS3) content of 2.4%. This paper shows that the RS3 yields can be substantially enhanced by debranching cassava starch using pullulanase followed by high pressure or cyclic high-pressure annealing. RS3 yield of 41.3% was obtained when annealing was carried out at 400 MPa/60°C for 15 min, whereas it took nearly 8 h to obtain the same yield under conventional atmospheric annealing at 60°C. The yield of RS3 could be further significantly in...

  20. Characters related to higher starch accumulation in cassava storage roots.

    Science.gov (United States)

    Li, You-Zhi; Zhao, Jian-Yu; Wu, San-Min; Fan, Xian-Wei; Luo, Xing-Lu; Chen, Bao-Shan

    2016-01-01

    Cassava (Manihot esculenta) is valued mainly for high content starch in its roots. Our understanding of mechanisms promoting high starch accumulation in the roots is, however, still very limited. Two field-grown cassava cultivars, Huanan 124(H124) with low root starch and Fuxuan 01(F01) with high root starch, were characterised comparatively at four main growth stages. Changes in key sugars in the leaves, stems and roots seemed not to be strongly associated with the final amount of starch accumulated in the roots. However, when compared with H124, F01 exhibited a more compact arrangement of xylem vascular bundles in the leaf axils, much less callose around the phloem sieve plates in the stems, higher starch synthesis-related enzymatic activity but lower amylase activity in the roots, more significantly up-regulated expression of related genes, and a much higher stem flow rate (SFR). In conclusion, higher starch accumulation in the roots results from the concurrent effects of powerful stem transport capacity highlighted by higher SFR, high starch synthesis but low starch degradation in the roots, and high expression of sugar transporter genes in the stems. A model of high starch accumulation in cassava roots was therefore proposed and discussed.

  1. Organic acid profile of commercial sour cassava starch

    Directory of Open Access Journals (Sweden)

    DEMIATE I.M.

    1999-01-01

    Full Text Available Organic acids are present in sour cassava starch ("polvilho azedo" and contribute with organoleptic and physical characteristics like aroma, flavor and the exclusive baking property, that differentiate this product from the native cassava starch. Samples of commercial sour cassava starch collected in South and Southeast Brazil were prepared for high performance liquid chromatography (HPLC analysis. The HPLC equipment had a Biorad Aminex HPX-87H column for organic acid analysis and a refractometric detector. Analysis was carried out with 0.005M sulfuric acid as mobile phase, 0.6ml/min flow rate and column temperature of 60° C. The acids quantified were lactic (0.036 to 0.813 g/100g, acetic (0 to 0.068 g/100g, propionic (0 to 0.013 g/100g and butyric (0 to 0.057 g/100g, that are produced during the natural fermentation of cassava starch. Results showed large variation among samples, even within the same region. Some samples exhibited high acid levels, mainly lactic acid, but in these neither propionic nor butyric acids were detected. Absence of butyric acid was not expected because this is an important component of the sour cassava starch aroma, and the lack of this acid may suggest that such samples were produced without the natural fermentation step.

  2. Biogas Production From Cassava Starch Effluent Using Microalgae As Biostabilisator

    Directory of Open Access Journals (Sweden)

    B. Budiyono

    2011-07-01

    Full Text Available The rapid growing of Indonesian population is emerging several critical national issues i.e. energy, food, environmental, water, transportation, as well as law and human right. As an agricultural country, Indonesia has abundant of biomass wastes such as agricultural wastes include the cassava starch wastes. The problem is that the effluent from cassava starch factories is released directly into the river before properly treatment. It has been a great source of pollution and has caused environmental problems to the nearby rural population. The possible alternative to solve the problem is by converting waste to energy biogas in the biodigester. The main problem of the biogas production of cassava starch effluent is acid forming-bacteria quickly produced acid resulting significantly in declining pH below the neutral pH and diminishing growth of methane bacteria. Hence, the only one of the method to cover this problem is by adding microalgae as biostabilisator of pH. Microalgae can also be used as purifier agent to absorb CO2.The general objective of this research project was to develop an integrated process of biogas production and purification from cassava starch effluent by using biostabilisator agent microalgae. This study has been focused on the used of urea, ruminant, yeast, microalgae, the treatment of gelled and ungelled feed for biogas production, pH control during biogas production using buffer Na2CO3, and feeding management in the semi-continuous process of biogas production. The result can be concluded as follows: i The biogas production increased after cassava starch effluent and yeast was added, ii Biogas production with microalgae and cassava starch effluent, yeast, ruminant bacteria, and urea were 726.43 ml/g total solid, iii Biogas production without  microalgae was 189 ml/g total solid.

  3. Performance Evaluation of Local Cassava Starches with Imported Starch for Drilling Fluid

    Directory of Open Access Journals (Sweden)

    Harry, T.F.

    2016-10-01

    Full Text Available Local cassava starches and an imported starch were characterized and evaluated for their performance as drilling fluid additives. Two local cassava cultivars, TMS 98/0581 and TMS 96/1632, starches and an imported starch were characterized by using X-ray diffraction techniques. Bentonite mud beneficiated with the starches were subjected to API viscosity and filtration tests. The local and imported starches were classified as B type crystal structure. The starches average particle sizes were 51.63nm, 23.57nm and 57.94nm for TMS 98/0581, TMS 96/1632 and imported starches respectively. The crystalline indices were between 22 and 35, while average specific surface areas were 151.65, 361.28 and 142.04 m2 /g for TMS 98/0581, TMS 96/1632 and imported starches respectively. The morphology indices, ranges were from 0.5 to 0.7485. The structural properties of TMS 98/0581 starch were found to be significantly close to that of the imported starch and were observed to be closer in performance as drilling fluid additive than TMS 96/1632. Local cassava starches with structural properties as TMS 98/0581, could serve as good substitute for drilling operation. The viscosity and fluid loss control results of the local samples compared favourably with the imported one.

  4. Morphological and mechanical characterization of thermoplastic starch and its blends with polylactic acid using cassava starch and bagasse

    Science.gov (United States)

    This study aims the use of an agro waste coming from the industrialization of cassava starch, known as cassava bagasse (BG). This material contains residual starch and cellulose fibers which can be used to obtain thermoplastic starch (TPS) and /or blends reinforced with fibers. In this context, it w...

  5. Cassava starch effluent treatment with concomitant SCP production.

    Science.gov (United States)

    Manilal, V B; Narayanan, C S; Balagopalan, C

    1991-03-01

    Yeasts and yeast-like organisms were chosen for the aerobic treatment of cassava starch factory effluent. A mixed culture of Candida utills and Endomycopsis fibuliger efficiently and rapidly utilized both starch and free sugars. After 28 h fermentation the protein content of the biomass was 22% (w/w), which remained unchanged during the remainder of the fermentation (60 h). This treatment removed 94% of the COD and 91% of the BOD.

  6. Improved cassava starch by antisense inhibition of granule-bound starch synthase I

    NARCIS (Netherlands)

    Raemakers, C.J.J.M.; Schreuder, M.M.; Suurs, L.C.J.M.; Furrer-Verhorst, M.; Vincken, J.P.; Vetten, de N.; Jacobsen, E.; Visser, R.G.F.

    2005-01-01

    Cassava is a poor man's crop which is mainly grown as a subsistence crop in many developing countries. Its commercial use was first as animal feed (also known as tapioca), but has shifted since the late sixties to a source of native starch. The availability of native starches, which on the one hand

  7. Physicochemical properties of cassava starch oxidized by sodium hypochlorite.

    Science.gov (United States)

    Garrido, Lúcia Helena; Schnitzler, Egon; Zortéa, Manoela Estefânea Boff; de Souza Rocha, Thaís; Demiate, Ivo Mottin

    2014-10-01

    In this work, cassava starch was modified by treatment with sodium hypochlorite (NaClO) at different concentrations (0.8, 2.0 and 5.0 % of active chlorine) and selected physicochemical properties of the oxidized starches were investigated. The native and modified samples were evaluated considering moisture, carboxyl content, apparent viscosity, susceptibility to syneresis, mid-infrared spectroscopy and crystallinity index. The treatment with NaClO resulted in alterations in carboxyl content of the oxidized starches that increased with increasing concentration of the oxidant. Oxidized starches also showed higher susceptibility to syneresis, as assessed by the release of liquid during freezing and thawing. Apparent viscosity analysis showed decrease in peak viscosity of the oxidized starches. X-ray diffractograms showed that the oxidation influenced the extent of cassava starch relative crystallinity found to lie between 34.4 % (native) and 39.9 % (2.0 % active chlorine). The infrared spectra are sensitive to structural changes on starch macromolecules and presented characteristic peaks as C-O-C of the six carbon glucose ring absorbs at 1,150-1,085 cm(-1) and due to axial deformation these bands changed with the crystal structure of the starch samples.

  8. High pressure intensification of cassava resistant starch (RS3) yields.

    Science.gov (United States)

    Lertwanawatana, Proyphon; Frazier, Richard A; Niranjan, Keshavan

    2015-08-15

    Cassava starch, typically, has resistant starch type 3 (RS3) content of 2.4%. This paper shows that the RS3 yields can be substantially enhanced by debranching cassava starch using pullulanase followed by high pressure or cyclic high-pressure annealing. RS3 yield of 41.3% was obtained when annealing was carried out at 400MPa/60°C for 15 min, whereas it took nearly 8h to obtain the same yield under conventional atmospheric annealing at 60°C. The yield of RS3 could be further significantly increased by annealing under 400 MPa/60°C pressure for 15 min followed by resting at atmospheric pressure for 3h 45 min, and repeating this cycle for up to six times. Microstructural surface analysis of the product under a scanning electron microscope showed an increasingly rigid density of the crystalline structure formed, confirming higher RS3 content.

  9. Characterization of cassava starch processed in an internal mixer

    Directory of Open Access Journals (Sweden)

    Marcia Cristina da Silva

    2013-01-01

    Full Text Available An internal mixer connected to a torque rheometer was used to investigate the effect of moisture content (13.2 to 46.8 g.100g- 1, rotation speed (13.2 to 46.8 rpm and processing temperature (53.2 to 86.8 °C, applying a factorial central composite design, on the specific mechanical energy (SME, pasting viscosity and crystallinity of cassava starch. Torque values were highly significant for the three variables, showing decrease with increasing moisture, temperature and rpm. The highest cold viscosity (CV was obtained at 13.18 g.100g- 1 moisture, 86.87 °C and 30 rpm due to increased rupture of starch granules caused by processing at lower moisture condition. Peak viscosity (PV values were higher than CV values which indicated that the processing was not able to destroy completely the molecular integrity of the starch granules. Smaller setback (SB at high temperature and rpm and low moisture showed possible starch depolymerization causing loss of recrystallization capacity. Processing under low moisture content resulted in reduction of crystallinity. The results showed that the effect of moisture was more pronounced than rotation speed and processing temperature of cassava starch.

  10. Effect of Drying Method and Variety on Quality of Cassava Starch ...

    African Journals Online (AJOL)

    Effect of Drying Method and Variety on Quality of Cassava Starch Extracts. ... However, the quality of the starch obtained from these alternative drying methods needs to be investigated. ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  11. Utilization of Cassava Starch in Copolymerisation of Superabsorbent Polymer Composite (SAPC

    Directory of Open Access Journals (Sweden)

    Akhmad Zainal Abidin

    2014-09-01

    Full Text Available Cassava starch was used as the main chain in the copolymerization of a superabsorbent polymer composite (SAPC based on acrylic acid and bentonite. The SAPC was synthesized through graft polymerization using nano-sized bentonite as reinforcement. The variables in this experiment were: bentonite concentration, acrylic acid to starch weight ratio, concentration of initiator, and cross linker. The product was characterized using FTIR, SEM and TGA-DSC. The results show that the polymerization reactions involved processes of incorporating starch chains as polymer backbone and grafting acrylic acid monomers onto it. The use of cassava starch in the polymerisation produced a very short reaction time (10-15 minutes, which led to SAPC production with higher efficiency and lower cost. Bentonite interacts with monomers via hydrogen and weak bonding, thus improving the thermal properties of the product. The maximum absorbance capacity obtained was at an acrylic acid to starch weight ratio of 5 and a concentration of initiator, cross linker and bentonite of 0.5, 0.05 and 2 weight percent, respectively. The product is suitable for agricultural and medical applications as well as common superabsorbent polymer applications.

  12. Extracellular amylase(s) production by fungi Botryodiplodia theobromae and Rhizopus oryzae grown on cassava starch residue.

    Science.gov (United States)

    Ray, R C

    2004-10-01

    The fungi Botryodiplodia theobromae and Rhizopus oryzae produce extracellular amylase when grown on a liquid medium containing 2% (WN) soluble starch or cassava starch residue(CSR) (as starch equivalent), a waste generated after extraction of starch from cassava, as the sole carbon source. Using CSR as the sole carbon source, the highest amylase activity of 3.25 and 3.8 units (mg, glucose released x ml(-1) x h(-1)) were obtained in shake flask cultures during the late stationary phase of growth of B. theobromae and R. oryzae, respectively. These values were slightly lower than the values obtained using soluble starch as the carbon source. Maximum enzyme synthesis in CSR incorporated medium occurred at the growth temperature of 30 degrees C and pH 6.0. Presence of inorganic NH4+ salts like ammonium acetate and ammonium nitrate in culture medium yielded more amylase than the other nitrogen sources. Amylase(s) production in the controlled environment of a Table-Top glass Jar Fermenter (2-L capacity) was 4.8 and 5.1 units for B. theobromae and R. oryzae, respectively using CSR as the carbon substrate. It is concluded that CSR, a cheap agricultural waste obtained after starch extraction from cassava could replace soluble starch as carbon substrate for commercial production of fungal amylase(s).

  13. Effects of citric acid esterification on digestibility, structural and physicochemical properties of cassava starch.

    Science.gov (United States)

    Mei, Ji-Qiang; Zhou, Da-Nian; Jin, Zheng-Yu; Xu, Xue-Ming; Chen, Han-Qing

    2015-11-15

    In this study, citric acid was used to react with cassava starch in order to compare the digestibility, structural and physicochemical properties of citrate starch samples. The results indicated that citric acid esterification treatment significantly increased the content of resistant starch (RS) in starch samples. The swelling power and solubility of citrate starch samples were lower than those of native starch. Compared with native starch, a new peak at 1724 cm(-1) was appeared in all citrate starch samples, and crystalline peaks of all starch citrates became much smaller or even disappeared. Differential scanning calorimetry results indicated that the endothermic peak of citrate starches gradually shrank or even disappeared. Moreover, the citrate starch gels exhibited better freeze-thaw stability. These results suggested that citric acid esterification induced structural changes in cassava starch significantly affected its digestibility and it could be a potential method for the preparation of RS with thermal stability.

  14. Molecular evolution and functional divergence of soluble starch synthase genes in cassava (manihot esculenta crantz).

    Science.gov (United States)

    Yang, Zefeng; Wang, Yifan; Xu, Shuhui; Xu, Chenwu; Yan, Changjie

    2013-01-01

    Soluble starch synthases (SSs) are major enzymes involved in starch biosynthesis in plants. Cassava starch has many remarkable characteristics, which should be influenced by the evolution of SS genes in this starchy root crop. In this work, we performed a comprehensive phylogenetic and evolutionary analysis of the soluble starch synthases in cassava. Genome-wide identification showed that there are 9 genes encoding soluble starch synthases in cassava. All of the soluble starch synthases encoded by these genes contain both Glyco_transf_5 and Glycos_transf_1 domains, and a correlation analysis showed evidence of coevolution between these 2 domains in cassava SS genes. The SS genes in land plants can be divided into 6 subfamilies that were formed before the origin of seed plants, and species-specific expansion has contributed to the evolution of this family in cassava. A functional divergence analysis for this family provided statistical evidence for shifted evolutionary rates between the subfamilies of land plant soluble starch synthases. Although the main selective pressure acting on land plant SS genes was purifying selection, our results also revealed that point mutation with positive selection contributed to the evolution of 2 SS genes in cassava. The remarkable cassava starch characteristics might be the result of both the duplication and adaptive selection of SS genes.

  15. Chemical composition, functional and pasting properties of cassava starch and soy protein concentrate blends.

    Science.gov (United States)

    Chinma, Chiemela Enyinnaya; Ariahu, Charles Chukwuma; Abu, Joseph Oneh

    2013-12-01

    The chemical, functional and pasting properties of cassava starch and soy protein concentrate blends intended for biofilm processing were studied. Cassava starch and soy protein concentrates were prepared and mixed at different proportions (100: 0%; 90 : 10%; 80 : 20%; 70 : 30%; 60;40% and 50: 50%). Addition of varying levels of soy protein concentrates to cassava starch led to increases in moisture (from 7.10 to 9.17%), protein ( from 0.32 to 79.03%), ash (from 0.45 to 2.67%) and fat (from 0.17 to 0.98%) contents while crude fiber, carbohydrate and amylose contents decreased from ( 1.19 to 0.38%, 90.77 to 57.01% and 29.45 to 23.04%) respectively . Water absorption capacity and swelling power of cassava starch were improved as a result of soy protein concentrate addition while syneresis and solubility value of composite blends were lower than 100% cassava starch. In general, cassava-soy protein concentrate blends formed firmer gels than cassava starch alone. There were significant (p ≤ 0.05) increases in peak viscosity (from 160.12 to 268.32RVU), final viscosity (from 140.41 to 211.08RVU) and pasting temperature (from 71.00 to 72.32 °C ) of cassava starch due to addition of soy protein concentrate. These results suggest that the addition of soy protein concentrate to cassava starch affected the studied functional properties of cassava starch as evidenced by changes such as reduced syneresis, and solubility that are desirable when considering this biopolymer as an edible biofilm.

  16. Biogas Production Using Anaerobic Biodigester from Cassava Starch Effluent

    Directory of Open Access Journals (Sweden)

    S. Sunarso

    2010-12-01

    Full Text Available IKMs’ factory activity in Margoyoso produces liquid and solid wastes. The possible alternative was to use the liquid effluent as biogas raw material. This study focuses on the used of urea, ruminant, yeast, microalgae, the treatment of gelled and ungelled feed for biogas production, pH control during biogas production using buffer Na2CO3, and feeding management in the semi-continuous process of biogas production that perform at ambient temperature for 30 days. Ruminant bacteria, yeast, urea, and microalgae was added 10% (v/v, 0.08% (w/v, 0.04% (w/v, 50% (v/v of mixing solution volume, respectively. The pH of slurry was adjusted with range 6.8-7.2 and was measured daily and corrected when necessary with Na2CO3. The total biogas production was measured daily by the water displacement technique. Biogas production from the ungelling and gelling mixture of cassava starch effluent, yeast, ruminant bacteria, and urea were 726.43 ml/g total solid and 198 ml/g total solid. Biogas production from ungelling mixture without yeast was 58.6 ml/g total solid. Biogas production from ungelling mixture added by microalgae without yeast was 58.72 ml/g total solid and that with yeast was 189 ml/g total solid. Biogas production from ungelling mixture of cassava starch effluent, yeast, ruminant bacteria, and urea in semi-continuous process was 581.15 ml/g total solid. Adding of microalgae as nitrogen source did not give significant effect to biogas production. But adding of yeast as substrate activator was very helpful to accelerate biogas production. The biogas production increased after cassava starch effluent and yeast was added. Requirement of sodium carbonate (Na2CO3 to increase alkalinity or buffering capacity of fermenting solution depends on pH-value

  17. Study of cassava starch enzymatic modification for maltodextrins obtention

    Directory of Open Access Journals (Sweden)

    Miguel Angel Díaz

    2012-05-01

    Full Text Available It was pretended to investigate the effect of the most relevant variables in cassava starch enzymatic hydrolysis process, on laboratory scale, to determine appropriate industrial conditions for the obtention of different kinds of maltodextrins. An a-Amylase enzyme, from genetically modified strain of Bacillus lichenijormis, was used to hydrolize the starch. Once the variables were chosen, an experimental fractioned factorial design was established with two levels. The Dextrose Equivalent (DE was taken as the response variable. The variables studied were: temperature (80-90°C, pH (5.5-6.5, dry-weight starch concentration (30-40% w/w, enzyme dosage (0.583-0.833 ul/g starch and calcium concentration (50-70 mgIL of CaClJ Some assays were settle in order to define the rheologic behavior and to determine the most relevant variables that affect the functional properties of the maltodextrin suspensions. Both, temperature and enzyme concentration were the variables that affect the most the initial convertion rate and the characteristics of the product convertion. For the interval of time considered, the highest DE obtained was 30 and the highest initial rate was 21.7 DE/hour. The functional properties of the maltodextrin solutions were affected by temperature and dry-weight starch concentration.

  18. Kinetics of cassava starch hydrolysis with Termamyl(R) enzyme.

    Science.gov (United States)

    Paolucci-Jeanjean, D; Belleville, M P; Zakhia, N; Rios, G M

    2000-04-05

    Kinetic properties of Termamyl(R) 120L were investigated with respect to starch hydrolysis in a batch reactor at substrate concentrations of 50-270 g. dm(-3) and enzyme concentrations of 0. 17-1 cm(3). dm(-3) (i.e., cm(3) of Novo Nordisk enzymatic solution per dm(3) of raw cassava starch suspension). A general kinetic expression giving product concentration as a function of time was first developed; an equation relating the reaction rate of each product to the sum of the concentrations of oligosaccharides with a higher degree of polymerisation was then derived. The empirical model satisfactorily fits experimental data for oligosaccharides with a degree of polymerization ranging from 1 to 7.

  19. Molecular and supra-molecular structure of waxy starches developed from cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Rolland-Sabaté, Agnès; Sanchez, Teresa; Buléon, Alain; Colonna, Paul; Ceballos, Hernan; Zhao, Shan-Shan; Zhang, Peng; Dufour, Dominique

    2013-02-15

    The aim of this work was to characterize the amylopectin of low amylose content cassava starches obtained from transgenesis comparatively with a natural waxy cassava starch (WXN) discovered recently in CIAT (International Center for Tropical Agriculture). Macromolecular features, starch granule morphology, crystallinity and thermal properties of these starches were determined. M¯(w) of amylopectin from the transgenic varieties are lower than WXN. Branched and debranched chain distributions analyses revealed slight differences in the branching degree and structure of these amylopectins, principally on DP 6-9 and DP>37. For the first time, a deep structural characterization of a series of transgenic lines of waxy cassava was carried out and the link between structural features and the mutated gene expression approached. The transgenesis allows to silenced partially or totally the GBSSI, without changing deeply the starch granule ultrastructure and allows to produce clones with similar amylopectin as parental cassava clone.

  20. Chemical composition, functional and pasting properties of cassava starch and soy protein concentrate blends

    OpenAIRE

    2011-01-01

    The chemical, functional and pasting properties of cassava starch and soy protein concentrate blends intended for biofilm processing were studied. Cassava starch and soy protein concentrates were prepared and mixed at different proportions (100: 0%; 90 : 10%; 80 : 20%; 70 : 30%; 60;40% and 50: 50%). Addition of varying levels of soy protein concentrates to cassava starch led to increases in moisture (from 7.10 to 9.17%), protein ( from 0.32 to 79.03%), ash (from 0.45 to 2.67%) and fat (from 0...

  1. Rheological behavior of gamma-irradiated cassava (Manihot esculenta crantz) starch

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Orelio L.; Uehara, Vanessa B.; Mastro, Nelida L. del, E-mail: nlmastro@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Cassava starch is the by-product of the process of pressing water out of cassava to make cassava meal. The juice has a fine starch, similar to rice or potato starch that, when dried, yields polvilho doce (sweet manioc starch); from the fermented juice comes polvilho azedo (sour manioc starch). Cassava starch can perform most of the functions where maize, rice and wheat starch are currently used. The aim of the present work was to determine the influence or ionizing radiation on the rheological behavior of aqueous preparations of gamma-irradiated cassava starch at different concentrations. Samples of polvilho doce and polvilho azedo were obtained at the local market and irradiated in plastic bags in a Gammacell 220 with doses of 1, 3 e 5 kGy, dose rate ∼ 1.2 kGy h-1. A Brooksfield viscometer was employed for the viscosity measurements. The results showed a strong dependence of the viscosity with the concentration of the starch solutions. In most of the cases there was a decrease of viscosity with the increase of the radiation dose usually seen in irradiated polysaccharides. Nevertheless, the dose response relation of the two kind of starch was different. (author)

  2. Coordination of cassava starch to metal ions and thermolysis of resulting complexes

    Directory of Open Access Journals (Sweden)

    Piotr Tomasik

    2003-12-01

    Full Text Available Cassava starch formed Werner-type complexes with ions of metals from the transition groups. This was proven by conductivity and electron paramagnetic resonance measurements. The coordination of starch to central metal ions influenced the thermal decomposition of starch. As a rule complexes started to decompose at lower temperature than did starch. On the other hand, the decomposition proceeded at a lower rate than the decomposition of non-coordinated starch.

  3. Effect of carboxymethyl cellulose concentration on physical properties of biodegradable cassava starch-based films

    Directory of Open Access Journals (Sweden)

    Sriburi Pensiri

    2011-02-01

    Full Text Available Abstract Background Cassava starch, the economically important agricultural commodity in Thailand, can readily be cast into films. However, the cassava starch film is brittle and weak, leading to inadequate mechanical properties. The properties of starch film can be improved by adding plasticizers and blending with the other biopolymers. Results Cassava starch (5%w/v based films plasticized with glycerol (30 g/100 g starch were characterized with respect to the effect of carboxymethyl cellulose (CMC concentrations (0, 10, 20, 30 and 40%w/w total solid and relative humidity (34 and 54%RH on the mechanical properties of the films. Additionally, intermolecular interactions were determined by Fourier transform infrared spectroscopy (FT-IR, melting temperature by differential scanning calorimetry (DSC, and morphology by scanning electron microscopy (SEM. Water solubility of the films was also determined. Increasing concentration of CMC increased tensile strength, reduced elongation at break, and decreased water solubility of the blended films. FT-IR spectra indicated intermolecular interactions between cassava starch and CMC in blended films by shifting of carboxyl (C = O and OH groups. DSC thermograms and SEM micrographs confirmed homogeneity of cassava starch-CMC films. Conclusion The addition of CMC to the cassava starch films increased tensile strength and reduced elongation at break of the blended films. This was ascribed to the good interaction between cassava starch and CMC. Cassava starch-CMC composite films have the potential to replace conventional packaging, and the films developed in this work are suggested to be suitable for low moisture food and pharmaceutical products.

  4. Influence of monoglycerides on the gelatinization and enzymatic breakdown of wheat and cassava starch

    NARCIS (Netherlands)

    Lonkhuysen, H. van; Blankestijn, J.

    1976-01-01

    The influence of monoglycerides on the flocculation and gelatinization of suspensions of wheat starch and cassava starch was studied. The sedimentation volumes of native and gelatinized starch with and without added monoglycerides were measured and the quantity of bound monoglycerides was

  5. An efficient treatment for detoxification process of cassava starch by plant cell wall-degrading enzymes.

    Science.gov (United States)

    Sornyotha, Somphit; Kyu, Khin Lay; Ratanakhanokchai, Khanok

    2010-01-01

    The objective of this work was to remove linamarin in starch from cassava (Manihot esculenta Crantz cv. KU-50) roots, a high-cyanogen variety by using plant cell wall-degrading enzymes, xylanase and cellulase. The combination of xylanase from Bacillus firmus K-1 and xylanase and cellulase from Paenibacillus curdlanolyticus B-6 at the ratio of 1:9 showed the maximum synergism at 1.8 times for hydrolyzing cassava cortex cell walls and releasing linamarase. Combined enzyme treatment enhanced linamarin liberation from the parenchyma by 90%. In addition, when the combined enzymes were applied for detoxification during cassava starch production, a low-cyanide-product was obtained with decreased linamarin concentration (96%) compared to non-enzyme treated tissues. Based on these results, xylanase and cellulase treatment is a good method for low-cyanide-cassava starch production and could be applied for detoxification of cassava products during processing.

  6. Statistical analysis of the factors that influenced the mechanical properties improvement of cassava starch films

    Science.gov (United States)

    Monteiro, Mayra; Oliveira, Victor; Santos, Francisco; Barros Neto, Eduardo; Silva, Karyn; Silva, Rayane; Henrique, João; Chibério, Abimaelle

    2017-08-01

    In order to obtain cassava starch films with improved mechanical properties in relation to the synthetic polymer in the packaging production, a complete factorial design 23 was carried out in order to investigate which factor significantly influences the tensile strength of the biofilm. The factors to be investigated were cassava starch, glycerol and modified clay contents. Modified bentonite clay was used as a filling material of the biofilm. Glycerol was the plasticizer used to thermoplastify cassava starch. The factorial analysis suggested a regression model capable of predicting the optimal mechanical property of the cassava starch film from the maximization of the tensile strength. The reliability of the regression model was tested by the correlation established with the experimental data through the following statistical analyse: Pareto graph. The modified clay was the factor of greater statistical significance on the observed response variable, being the factor that contributed most to the improvement of the mechanical property of the starch film. The factorial experiments showed that the interaction of glycerol with both modified clay and cassava starch was significant for the reduction of biofilm ductility. Modified clay and cassava starch contributed to the maximization of biofilm ductility, while glycerol contributed to the minimization.

  7. Physicochemical and Rheological Properties of Optimised Cocoyam-Based Composite Flour Comprising Cassava Starch

    Directory of Open Access Journals (Sweden)

    Awolu Olugbenga Olufemi

    2016-12-01

    Full Text Available Composite flour comprising cocoyam (Colocassia esculenta, bambara groundnut and cassava starch was produced. The proximate and minerals compositions and functional properties were optimized using optimal mixture design of response surface methodology. The antinutritional, pasting and farinograph analyses of the optimum blends were evaluated. Bambara groundnut improved protein, fibre, ash and minerals contents; cassava starch improved swelling capacity, least gelation and pasting characteristics. The optimum blends CBC1 (70% cocoyam flour, 18.33% bambara groundnut flour, 11.67% cassava starch and CBC2 (69.17% cocoyam flour, 16.67% bambara groundnut flour, 14.17% cassava starch. were comparable to wheat–based flour samples (60% wheat, 30% cocoyam, 10% bambara groundnut flours and (72% wheat, 19% cocoyam, 9% bambara groundnut flours in terms of pasting and farinograph analyses.

  8. Physicochemical properties of potato and cassava starches and their mutants in relation to their structural properties

    NARCIS (Netherlands)

    Gomand, S.V.; Lamberts, L.; Visser, R.G.F.; Delcour, J.A.

    2010-01-01

    Physicochemical properties [swelling power (SP), pasting behaviour and retrogradation] of five wild type (wt), five amylose free (amf), four high-amylose (ha) potato starches (ps) and one wt and amf cassava starch (cs) were investigated. While swelling of wtps occurred in two phases, amfps showed a

  9. Thermal characterization of partially hydrolyzed cassava (Manihot esculenta starch granules

    Directory of Open Access Journals (Sweden)

    Luiz Gustavo Lacerda

    2008-12-01

    Full Text Available Cassava starch, partially hydrolyzed by fungal á-amylase, was characterized using thermal analysis, light microscopy and X-ray diffraction. Thermal degradation was initiated at lower degradation temperatures after enzymatic treatment and the DSC (Differential scanning calorimetry analysis showed almost similar range of gelatinization temperature, but the enthalpies of gelatinization were quite increased for the partially hydrolyzed starch granules. The results suggested that the partial degradation of the starch granules was concentrated in the amorphous regions.Amilases fúngicas são comumente empregadas a amidos com o intuito de otimizar o rendimento de leveduras, modificar a textura de produtos panificados e prolongar a vida de prateleira do produto final. A hidrólise parcial enzimática pode auxiliar no entendimento da estrutura do amido ganular. Amido de mandioca parcialmente hidrolisado por á-amilase fúngica foi investigado utilizando-se técnicas termoanalíticas, microscopia ótica e difratometria por raios X. A degradação térmica iniciou-se a temperaturas menores após o tratamento enzimático e a análise por DSC mostrou uma próxima faixa de temperatura de gelatinização, porém, a entalpia necessária para o evento foi maior para os grânulos parcialmente hidrolisados. Os resultados sugerem que a degradação parcial do amido granular foi concentrada em regiões amorfas.

  10. DEVELOPMENT OF ADHESIVE TO THE BASIS OF CORN AND CASSAVA STARCH

    Directory of Open Access Journals (Sweden)

    Rosane Furtado Fabrício

    2014-05-01

    Full Text Available Corn and native cassava starch were modified by oxidation and acid hydrolysis, aiming to develop paper and paperboard stickers. The oxidation was made with Sodium hypochlorite (NaOCl in two distinct concentrations of active chloride which is present on oxidizing agent solution. The synthesis resulting products were used to make stickers and they were compared to corn and cassava starch based stickers without any modification, as well as commercial stickers based on polyvinyl acetate (PVA. Two different methodologies were tested using acid hydrolysis to modify corn and cassava starch, both using phosphoric acid (H3PO4 in order to obtain dextrin and subsequently use it in the production of stickers and also comparing them to petrochemical-based commercial stickers. Considering the different starch modifications methods (oxidation and acid hydrolysis, stickers based on renewable raw material were obtained, which combine biodegradability, low costs and availability.

  11. Development of waxy cassava with different Biological and physico-chemical characteristics of starches for industrial applications.

    Science.gov (United States)

    Zhao, Shan-Shan; Dufour, Dominique; Sánchez, Teresa; Ceballos, Hernan; Zhang, Peng

    2011-08-01

    The quality of cassava starch, an important trait in cassava breeding programs, determines its applications in various industries. For example, development of waxy (having a low level of amylose) cassava is in demand. Amylose is synthesized by granule-bound starch synthase I (GBSSI) in plants, and therefore, down-regulation of GBSSI expression in cassava might lead to reduced amylose content. We produced 63 transgenic cassava plant lines that express hair-pin dsRNAs homologous to the cassava GBSSI conserved region under the control of the vascular-specific promoter p54/1.0 from cassava (p54/1.0::GBSSI-RNAi) or cauliflower mosaic virus (CaMV) 35S (35S::GBSSI-RNAi). After the screening storage roots and starch granules from field-grown plants with iodine staining, the waxy phenotype was discovered: p54/1.0::GBSSI-RNAi line A8 and 35S::GBSSI-RNAi lines B9, B10, and B23. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that there was no detectable GBSSI protein in the starch granules of plants with the waxy phenotype. Further, the amylose content of transgenic starches was significantly reduced (starch granules from the wild-type (about 25%). The inner structure of the waxy starch granules differed from that of the untransformed ones, as revealed by transmission electron microscopy analysis as well as morphological changes in the iodine-starch complex. Endothermic enthalpy was reduced in waxy cassava starches, according to differential scanning calorimeter analysis. Except B9, all waxy starches displayed the A-type X-ray diffraction pattern. Amylogram patterns of the waxy cassava starches were analyzed using a rapid viscosity analyzer and found to have increased values for clarity, peak viscosity, gel breakdown, and swelling index. Setback, consistency, and solubility were notably reduced. Therefore, waxy cassava with novel starch in its storage roots was produced using the biotechnological approach, promoting its industrial utilization.

  12. Optimization of factors to obtain cassava starch films with improved mechanical properties

    Science.gov (United States)

    Monteiro, Mayra; Oliveira, Victor; Santos, Francisco; Barros Neto, Eduardo; Silva, Karyn; Silva, Rayane; Henrique, João; Chibério, Abimaelle

    2017-08-01

    In this study, was investigated the optimization of the factors that significantly influenced the mechanical property improvement of cassava starch films through complete factorial design 23. The factors to be analyzed were cassava starch, glycerol and modified clay contents. A regression model was proposed by the factorial analysis, aiming to estimate the condition of the individual factors investigated in the optimum state of the mechanical properties of the biofilm, using the following statistical tool: desirability function and response surface. The response variable that delimits the improvement of the mechanical property of the biofilm is the tensile strength, such improvement is obtained by maximizing the response variable. The factorial analysis showed that the best combination of factor configurations to reach the best response was found to be: with 5g of cassava starch, 10% of glycerol and 5% of modified clay, both percentages in relation to the dry mass of starch used. In addition, the starch biofilm showing the lowest response contained 2g of cassava starch, 0% of modified clay and 30% of glycerol, and was consequently considered the worst biofilm.

  13. Post-harvest conservation of organic strawberries coated with cassava starch and chitosan

    Directory of Open Access Journals (Sweden)

    Raquel P Campos

    2011-10-01

    Full Text Available The strawberry is as non-climacteric fruit, but has a high post-harvest respiration rate, which leads to a rapid deterioration at room temperature. This study aimed to evaluate the application of biodegradable coating on postharvest conservation of organic strawberries, cv. Camarosa, packed in plastic hinged boxes and stored at 10ºC. The treatments consisted of: a control; b 2% cassava starch; c 1% chitosan; and d 2% cassava starch + 1% chitosan. Physical and chemical characteristics of fruits were evaluated at 3, 6 and 9 days of storage, and microbiological and sensory analyses were carried out at the end of the storage period. The treatments influenced positively the post-harvest quality of organic strawberries. The coating cassava starch + chitosan provided the best results, with less than 6% of loss in fruit mass, lower counts of yeast and psychrophilic microorganisms and the best appearance according to the sensory analysis.

  14. Thin layer drying of cassava starch using continuous vibrated fluidized bed dryer

    Science.gov (United States)

    Suherman, Trisnaningtyas, Rona

    2015-12-01

    This paper present the experimental work and thin layer modelling of cassava starch drying in continuous vibrated fluidized bed dryer. The experimental data was used to validate nine thin layer models of drying curve. Cassava starch with 0.21 initial moisture content was dried in different air drying temperature (50°C, 55°C, 60°C, 65°C, 70°C), different weir height in bed (0 and 1 cm), and different solid feed flow (10 and 30 gr.minute-1). The result showed air dryer temperature has a significant effect on drying curve, while the weir height and solid flow rate are slightly. Based on value of R2, χ2, and RMSE, Page Model is the most accurate simulation for thin layer drying model of cassava starch.

  15. Process optimization for bioethanol production from cassava starch using novel eco-friendly enzymes

    Energy Technology Data Exchange (ETDEWEB)

    Shanavas, S.; Padmaja, G.; Moorthy, S.N.; Sajeev, M.S.; Sheriff, J.T. [Division of Crop Utilization, Central Tuber Crops Research Institute, Thiruvananthapuram, 695 017 Kerala (India)

    2011-02-15

    Although cassava (Manihot esculenta Crantz) is a potential bioethanol crop, high operational costs resulted in a negative energy balance in the earlier processes. The present study aimed at optimizing the bioethanol production from cassava starch using new enzymes like Spezyme {sup registered} Xtra and Stargen trademark 001. The liquefying enzyme Spezyme was optimally active at 90 C and pH 5.5 on a 10% (w/v) starch slurry at levels of 20.0 mg (280 Amylase Activity Units) for 30 min. Stargen levels of 100 mg (45.6 Granular Starch Hydrolyzing Units) were sufficient to almost completely hydrolyze 10% (w/v) starch at room temperature (30 {+-} 1 C). Ethanol yield and fermentation efficiency were very high (533 g/kg and 94.0% respectively) in the Stargen + yeast process with 10% (w/v) starch for 48 h. Raising Spezyme and Stargen levels to 560 AAU and 91.2 GSHU respectively for a two step loading [initial 20% (w/v) followed by 20% starch after Spezyme thinning]/initial higher loading of starch (40% w/v) resulted in poor fermentation efficiency. Upscaling experiments using 1.0 kg starch showed that Stargen to starch ratio of 1:100 (w/w) could yield around 558 g ethanol/kg starch, with a high fermentation efficiency of 98.4%. The study showed that Spezyme level beyond 20.0 mg for a 10% (w/v) starch slurry was not critical for optimizing bioethanol yield from cassava starch, although an initial thinning of starch for 30 min by Spezyme facilitated rapid saccharification-fermentation by Stargen + yeast system. The specific advantage of the new process was that the reaction could be completed within 48.5 h at 30 {+-} 1 C. (author)

  16. Effect of fructooligosaccharides on the physicochemical properties of sour cassava starch and baking quality of gluten-free cheese bread

    OpenAIRE

    Rodriguez-Sandoval, Eduardo; Landi Franco, Celia M. [UNESP; Manjarres-Pinzon, Katherine

    2014-01-01

    The present research was undertaken to explore the influence of fructooligosaccharides (FOS) on the functional and thermal properties of sour cassava starch and the quality characteristics of gluten-free (GF) cheese bread. Fructooligosaccharides were used to replace sour cassava starch at substitution level of 9% (SF1), 17% (SF2), and 29% (SF3). The functional and thermal properties of the starch-FOS mixtures were determined by the water absorption index (WAI), water solubility index (WSI), p...

  17. Ozone oxidation of cassava starch in aqueous solution at different pH.

    Science.gov (United States)

    Klein, Bruna; Vanier, Nathan Levien; Moomand, Khalid; Pinto, Vânia Zanella; Colussi, Rosana; da Rosa Zavareze, Elessandra; Dias, Alvaro Renato Guerra

    2014-07-15

    Ozone is a more powerful oxidant than common oxidising agents, such as sodium hypochlorite and hydrogen peroxide. It is considered as a safer starch modification method for both consumers and the environment. However, few studies have investigated the changes in starch properties associated with ozone treatment, particularly when applied in aqueous solution. This work aimed to evaluate the carbonyl and carboxyl contents, the X-ray diffraction patterns, the spectrum profiles of Fourier transform infrared spectroscopy, the pasting properties and the surface morphology of ozone-oxidised cassava starch during 60 min under different pH (3.5, 6.5 and 9.5) at 25°C. The pH 6.5 and 9.5 seemed to favour the cross-linking between the depolymerised starch molecules during ozonation. The pH 3.5 was more effective in reducing the peak viscosity, breakdown, setback and final viscosity of cassava starch during ozonation in aqueous solution. No differences in the granule surface morphology were observed in the ozone-treated cassava starches compared to native starch.

  18. EFFECT OF TEMPERATURE AND pH OF MODIFICATION PROCESS ON THE PHYSICAL-MECHANICAL PROPERTIES OF MODIFIED CASSAVA STARCH

    Directory of Open Access Journals (Sweden)

    Yudi Wicaksono

    2016-11-01

    Full Text Available The use of cassava starch for excipient in the manufacturing of the tablet has some problems, especially on physical-mechanical properties. The purpose of this study was to determine the effect of the differentness of temperature and pH in the process of modification on the physical-mechanical properties of modified cassava starch. Modifications were performed by suspending cassava starch into a solution of 3 % (w/v PVP K30. The effect of the difference of temperature was observed at temperatures of 25; 45 and 65 0C, while the effect of the difference of pH was observed at pH of 4.0; 7.0 and 12.0. The results showed that the temperature and pH did not affect the physical-mechanical properties of the modified cassava starch. Modification of cassava starch at pH and temperature of 7.0 and 45 0C was produced modified cassava starch with the most excellent solubility, while the best swelling power were formed by the modification process at pH and temperature of 7.0 and 25 0C. Overall, the most excellent compression properties of modified cassava starch resulted from the modification process at pH 12.

  19. Biodegradable foam trays obtained from mixtures of non-irradiated and irradiated cassava starches

    Energy Technology Data Exchange (ETDEWEB)

    Brant, A.J.C.; Naime, N.; Lugao, A.B.; Ponce, P., E-mail: thonybrant@gmail.com, E-mail: patiponce@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Biodegradable polymers, such as starch, cellulose, PHB, PLA, and derivatives thereof, are being studied to produce innovative packaging in the most diverse shapes (films, bags, trays, bottles, etc.) to attend this current market trend. The aim of this work was to produce foam trays from cassava starch for food packaging by extrusion-thermopressing process. Their formulations were based on non-irradiated and γ-irradiated starches at diverse radiation absorbed doses (kGy) in order to evaluate the influence of the irradiated starches on the physical properties of the trays. Water absorption results showed an irregular increase with the increase of the absorbed dose: 26.32% and 39.84% for the trays based on starch 0 kGy and 1:1 (w/w) mixture of starches 0 kGy and 100.0 kGy, respectively. Other physicochemical properties were evaluated from the starches utilized and the trays obtained. (author)

  20. Effect of pectin particles and cotton fibers on properties of thermoplastic cassava starch composites

    Directory of Open Access Journals (Sweden)

    Jutarat Prachayawarakorn

    2016-04-01

    Full Text Available Due to poor mechanical properties and high water uptake of thermoplastic starch (TPS, this research focused on property improvement of thermoplastic cassava starch (TPCS using natural compatible polymers, i.e. pectin particles and cotton fibers. Different TPCS composites, reinforced by the pectin particles and/or the cotton fibers, were compounded and shaped using an internal mixer and a compression molding machine, respectively. It was found from infrared (IR spectra that the peak position of O-H stretching of the TPCS polymer clearly shifted to lower wavenumber by the addition of the pectin particles and/or the cotton fibers. Moreover, the significant increase of stress at maximum load and Young’s modulus of the TPCS/pectin particle and the TPCS/cotton fiber composites was observed. The drop of water uptake was also found when the cotton fibers were incorporated into the TPCS matrix with/without pectin particles. In addition, X-Ray Diffraction, Scanning Electron Microscopy and Thermogravimetric Analysis were used to characterize different TPCS composites.

  1. Cassava starch as an alternative cheap gelling agent for the in vitro ...

    African Journals Online (AJOL)

    SERVER

    2007-07-03

    Jul 3, 2007 ... Potato transplants from the liquid medium and cassava starch gelled medium had .... cant interactions during the three generations of sub- .... biodegradable and poses no threat to the environment on ... provision of potato genotypes and facilities for the ... BSc Dissertation University of Malawi, Bunda.

  2. Preparation and physico-chemical properties of hydrogels from carboxymethyl cassava starch crosslinked with citric acid

    Science.gov (United States)

    Boonkham, Sasikan; Sangseethong, Kunruedee; Chatakanon, Pathama; Niamnuy, Chalida; Nakasaki, Kiyohiko; Sriroth, Klanarong

    2014-06-01

    Recently, environmentally friendly hydrogels prepared from renewable bio-based resources have drawn significant attention from both industrial and academic sectors. In this study, chemically crosslinked hydrogels have been developed from cassava starch which is a bio-based polymer using a non-toxic citric acid as a crosslinking agent. Cassava starch was first modified by carboxymethylation to improve its water absorbency property. The carboxymethyl cassava starch (CMCS) obtained was then crosslinked with citric acid at different concentrations and reaction times. The gel fraction of hydrogels increased progressively with increasing citric acid concentration. Free swelling capacity of hydrogels in de-ionized water, saline solution and buffers at various pHs as well as absorption under load were investigated. The results revealed that swelling behavior and mechanical characteristic of hydrogels depended on the citric acid concentration used in reaction. Increasing citric acid concentration resulted in hydrogels with stronger network but lower swelling and absorption capacity. The cassava starch hydrogels developed were sensitive to ionic strength and pH of surrounding medium, showing much reduced swelling capacity in saline salt solution and acidic buffers.

  3. Exploratory studies on the carboxymethylation of cassava starch in water-miscible organic media

    NARCIS (Netherlands)

    Yao, J; Chen, WR; Manurung, RM; Ganzeveld, KJ; Heeres, HJ; Manurung, Robbert M.; Chen, Wen-ren

    2004-01-01

    The carboxymethylation of cassava starch using sodium monochloroacetate (SMCA) as an etherification agent was investigated. Mixtures of water and water-miscible organic liquids were selected as carboxymethylation reaction medium to obtain a high degree of substitution (DS) without changing the granu

  4. Characterization of superabsorbent hydrogel based on epichlorohydrin crosslink and carboxymethyl functionalization of cassava starch

    Science.gov (United States)

    Muharam, S.; Yuningsih, L. M.; Sumitra, M. R.

    2017-07-01

    Superabsorbent hydrogel was prepared by epichlorohydrin crosslink of cassava starch. Their swelling improved with added carboxymethyl group on the starch-epichlorohydrin structure. The structure and properties of starch-epichlorohydrin-carboxymethyl hydrogel were measured by SEM, FTIR, water and physiological solution absorption test and water retention test. The result showed that hydrogel displayed macroporous with heterogenous distribution and irregular surface was formed by epichlorohydrin and carboxymethyl bond in the structure of hydrogel. It was confirmed also by the FTIR spectra. The swelling ratio of starch-epichlorohydrin hydrogel to the water is 518 % and increased to 1,028.5 % with carboxymethyl addition on the structure. The best influence of the physiological solution to the swelling ratio of starch-epichlorohydrin-carboxymethyl hydrogel is urea solution. The water retention of starch-epichlorohydrin-carboxymethyl hydrogel in NaCl solution is better than in CaCl2 solution.

  5. THE GENOTYPES X ENVIRONMENT INTERACTION FOR STARCH YIELD IN NINE-MONTH OLD CASSAVA PROMISING CLONES

    Directory of Open Access Journals (Sweden)

    Sholihin Sholihin

    2016-10-01

    Full Text Available Cassava (Manihot esculenta is planted in dry areas with different environmental conditions, therefore the yield is varied. The aim of the study was to analyze the genotype x environment interaction for starch yield in 9-month old cassava promising clones. The experiment was conducted on mineral soils in four different locations, i.e. Lumajang-East Java (Inceptisols, Kediri-East Java (Entisols, Pati-Central Java (Alfisols, and Tulangbawang-Lampung (Ultisols during 2004- 2005. The experiment was arranged in split plot design with three replications. The main plots were cultivation techniques, i.e. simple technology and improved technology, whereas the subplots were 15 cassava promising clones. Starch yield of 9- month old cassava plants was analysed using the additive maineffects and multiplicative interaction (AMMI. The results showed that environmental factors determined the stability of starch yield were soil bulk density on subsoil, the number of rainy days at fifth month, minimum air temperature at fourth month, and minimum air humidity at seventh month. CMM97002-183, Adira 4, CMM97007-145, CMM97007-235, Malang 2, CMM97002-36, and CMM97006-44 were identified as the stable cassava clones for starch yield in 9-month old. Average starch yield of Adira 4 was the third after MLG 10311 and CMM 97006-52. The CMM97006-52 was adapted to the soils having high P2O5 content on topsoil, high minimum air temperature at 4 and 5 months after planting, high minimum relative humidity at 7 months after planting, low total rainfall at 5 months after planting, and low number of rainy days at 5 and 8 months after planting. MLG 10311 was adapted to low soil bulk density. The average starch yield of MLG 10311 was the highest at 9 months after planting. The study implies that advanced trials for CMM 977006-52 and MLG 10311 clones are needed, so the clones can be released as new varieties of cassava. In selection and evaluation, the bulk density on subsoil is needed

  6. Synergistic amylomaltase and branching enzyme catalysis to suppress cassava starch digestibility.

    Science.gov (United States)

    Sorndech, Waraporn; Meier, Sebastian; Jansson, Anita M; Sagnelli, Domenico; Hindsgaul, Ole; Tongta, Sunanta; Blennow, Andreas

    2015-11-05

    Starch provides our main dietary caloric intake and over-consumption of starch-containing foods results in escalating life-style disease including diabetes. By increasing the content of α-1,6 branch points in starch, digestibility by human amylolytic enzymes is expected to be retarded. Aiming at generating a soluble and slowly digestible starch by increasing the content and changing the relative positioning of the branch points in the starch molecules, we treated cassava starch with amylomaltase (AM) and branching enzyme (BE). We performed a detailed molecular analysis of the products including amylopectin chain length distribution, content of α-1,6 glucosidic linkages, absolute molecular weight distribution and digestibility. Step-by-step enzyme catalysis was the most efficient treatment, and it generated branch structures even more extreme than those of glycogen. All AM- and BE-treated samples showed increased resistance to degradation by porcine pancreatic α-amylase and glucoamylase as compared to cassava starch. The amylolytic products showed chain lengths and branching patterns similar to the products obtained from glycogen. Our data demonstrate that combinatorial enzyme catalysis provides a strategy to generate potential novel soluble α-glucan ingredients with low dietary digestibility assets.

  7. Production of raw cassava starch-degrading enzyme by Penicillium and its use in conversion of raw cassava flour to ethanol.

    Science.gov (United States)

    Lin, Hai-Juan; Xian, Liang; Zhang, Qiu-Jiang; Luo, Xue-Mei; Xu, Qiang-Sheng; Yang, Qi; Duan, Cheng-Jie; Liu, Jun-Liang; Tang, Ji-Liang; Feng, Jia-Xun

    2011-06-01

    A newly isolated strain Penicillium sp. GXU20 produced a raw starch-degrading enzyme which showed optimum activity towards raw cassava starch at pH 4.5 and 50 °C. Maximum raw cassava starch-degrading enzyme (RCSDE) activity of 20 U/ml was achieved when GXU20 was cultivated under optimized conditions using wheat bran (3.0% w/v) and soybean meal (2.5% w/v) as carbon and nitrogen sources at pH 5.0 and 28 °C. This represented about a sixfold increment as compared with the activity obtained under basal conditions. Starch hydrolysis degree of 95% of raw cassava flour (150 g/l) was achieved after 72 h of digestion by crude RCSDE (30 U/g flour). Ethanol yield reached 53.3 g/l with fermentation efficiency of 92% after 48 h of simultaneous saccharification and fermentation of raw cassava flour at 150 g/l using the RCSDE (30 U/g flour), carried out at pH 4.0 and 40 °C. This strain and its RCSDE have potential applications in processing of raw cassava starch to ethanol.

  8. Improving hydrogen production from cassava starch by combination of dark and photo fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Su, Huibo; Cheng, Jun; Zhou, Junhu; Song, Wenlu; Cen, Kefa [State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027 (China)

    2009-02-15

    The combination of dark and photo fermentation was studied with cassava starch as the substrate to increase the hydrogen yield and alleviate the environmental pollution. The different raw cassava starch concentrations of 10-25 g/l give different hydrogen yields in the dark fermentation inoculated with the mixed hydrogen-producing bacteria derived from the preheated activated sludge. The maximum hydrogen yield (HY) of 240.4 ml H{sub 2}/g starch is obtained at the starch concentration of 10 g/l and the maximum hydrogen production rate (HPR) of 84.4 ml H{sub 2}/l/h is obtained at the starch concentration of 25 g/l. When the cassava starch, which is gelatinized by heating or hydrolyzed with {alpha}-amylase and glucoamylase, is used as the substrate to produce hydrogen, the maximum HY respectively increases to 258.5 and 276.1 ml H{sub 2}/g starch, and the maximum HPR respectively increases to 172 and 262.4 ml H{sub 2}/l/h. Meanwhile, the lag time ({lambda}) for hydrogen production decreases from 11 h to 8 h and 5 h respectively, and the fermentation duration decreases from 75-110 h to 44-68 h. The metabolite byproducts in the dark fermentation, which are mainly acetate and butyrate, are reused as the substrates in the photo fermentation inoculated with the Rhodopseudomonas palustris bacteria. The maximum HY and HPR are respectively 131.9 ml H{sub 2}/g starch and 16.4 ml H{sub 2}/l/h in the photo fermentation, and the highest utilization ratios of acetate and butyrate are respectively 89.3% and 98.5%. The maximum HY dramatically increases from 240.4 ml H{sub 2}/g starch only in the dark fermentation to 402.3 ml H{sub 2}/g starch in the combined dark and photo fermentation, while the energy conversion efficiency increases from 17.5-18.6% to 26.4-27.1% if only the heat value of cassava starch is considered as the input energy. When the input light energy in the photo fermentation is also taken into account, the whole energy conversion efficiency is 4.46-6.04%. (author)

  9. Kinetics of the Enzymatic Hydrolysis of Sweet Cassava Starch and Bitter Cassava Flour and Gadung (Dioscorea hispida Dennst Flour at Low Temperature

    Directory of Open Access Journals (Sweden)

    Hargono Hargono

    2017-05-01

    Full Text Available Starch is a potential substrate for this purpose, but the extra cost is needed to hydrolyze it into reducing sugar. As an alternative to the expensive and energy demanding conventional hydrolysis process, the low-temperature hydrolysis is being studied. Granular Starch Hydrolysing Enzyme (GSHE was used in the process to degrade starch into reducing sugar at 30°C and pH 4. The substrates included bitter cassava flour, sweet cassava starch, and gadung flour. Starch concentrations studied were 50, 100, 150, 200, 250, 300, 350, and 400 g/L, respectively, while concentration of enzyme was 1.5 % (w/w. The optimum condition of the process was hydrolysis using 200 g/L of substrate concentration and enzyme  concentration of 1.5% for 12 h. It was found that the reducing sugar was  49.3  g/L and the productivity of reducing sugar (Qrs was 4.11 (gL-1 h-1.   Lineweaver-Burk plot of Michaelis-Menten equation was used to study the inhibition kinetics. The Michaelis-Menten constants (Km  for these three substrates were determined as 141.64 g/L, 137,64 g/L and 140.84 g/L for bitter cassava flour, sweet cassava starch, and gadung flour, respectively. The value of  Vm/Km, which denotes the affinity of the enzyme to the substrate, were determined and compared, and the result showed that the affinity (Vm to the enzyme to this substrate followed  the order of sweet cassava starch˃ bitter cassava flour˃ gadung flour, and all are non-competitive inhibitor, while the  Ki value was 0.022 h -1.

  10. Mechanical properties of bioplastics cassava starch film with Zinc Oxide nanofiller as reinforcement

    Science.gov (United States)

    Harunsyah; Yunus, M.; Fauzan, Reza

    2017-06-01

    This study focuses on investigating the influence of zinc oxide nanofiller on the mechanical properties of bioplastic cassava starch films. Bioplastic cassava starch film-based zinc oxide reinforced composite biopolymeric films were prepared by casting technique. The content of zinc oxide in the bioplastic films was varied from 0.2%, 0.4%, 0.6%, 0.8% and 1.0% (w/w) by weight of starch. Surface morphologies of the composites bioplastic films were examined by scanning electron microscope (SEM).The result showed that the Tensile strength (TS) was improved significantly with the additional of zinc oxide but the elongation at break (EB %) of the composites was decreased. The maximum tensile strength obtained was 22.30 kgf / mm on the additional of zinc oxide by 0.6% and plastilizer by 25%. Based on data of FTIR, the produced film plastic did not change the group function and it can be concluded that theinteraction in film plastic produced was only a physical interaction. Biodegradable plastic film based on cassava starch-zinc oxide and plasticizer glycerol showed that interesting mechanical properties being transparent, clear, homogeneous, flexible, and easily handled.

  11. SACCHARIFICATION OF NATIVE CASSAVA STARCH AT HIGH DRY SOLIDS IN AN ENZYMATIC MEMBRANE REACTOR

    Directory of Open Access Journals (Sweden)

    I Nyoman Widiasa

    2012-02-01

    Full Text Available This study is aimed to develop a novel process scheme for hydrolysis of native cassava starch at high dry solids using an enzymatic membrane reactor (EMR. Firstly, liquefied cassava starch having solids content up to 50% by weight was prepared by three stage liquefactions in a conventional equipment using a commercially available heat stable a-amylase (Termamyl 120L. The liquefied cassava starch was further saccharified in an EMR using glucoamylase (AMG E. By using the developed process scheme, a highly clear hydrolysate with dextrose equivalent (DE approximately 97 could be produced, provided the increase of solution viscosity during the liquefaction was precisely controlled. The excessive space time could result in reduction in conversion degree of starch. Moreover, a residence time distribution study confirmed that the EMR could be modelled as a simple continuous stirred tank reactor (CSTR. Using Lineweaver-Burk analysis, the apparent Michaelis-Menten constant (Km and glucose production rate constant (k2 were 552 (g/l and 4.04 (min-1, respectively. Application of simple CSTR model with those kinetic parameters was quietly appropriate to predict the reactor’s performance at low space time.

  12. Some Nutritional Characteristics of Enzymatically Resistant Maltodextrin from Cassava (Manihot esculenta Crantz) Starch.

    Science.gov (United States)

    Toraya-Avilés, Rocío; Segura-Campos, Maira; Chel-Guerrero, Luis; Betancur-Ancona, David

    2017-01-19

    Cassava (Manihot esculenta Crantz) native starch was treated with pyroconversion and enzymatic hydrolysis to produce a pyrodextrin and an enzyme-resistant maltodextrin. Some nutritional characteristics were quantified for both compounds. Pyroconversion was done using a 160:1 (p/v) starch:HCl ratio, 90 °C temperature and 3 h reaction time. The resulting pyrodextrin contained 46.21% indigestible starch and 78.86% dietary fiber. Thermostable α-amylase (0.01%) was used to hydrolyze the pyrodextrin at 95 °C for 5 min. The resulting resistant maltodextrin contained 24.45% dextrose equivalents, 56.06% indigestible starch and 86.62% dietary fiber. Compared to the cassava native starch, the pyrodextrin exhibited 56% solubility at room temperature and the resistant maltodextrin 100%. The glycemic index value for the resistant maltodextrin was 59% in healthy persons. Its high indigestible starch and dietary fiber contents, as well as its complete solubility, make the resistant maltodextrin a promising ingredient for raising dietary fiber content in a wide range of foods, especially in drinks, dairy products, creams and soups.

  13. Comparison of pasting and gel stabilities of waxy and normal starches from potato, maize, and rice with those of a novel waxy cassava starch under thermal, chemical, and mechanical stress.

    Science.gov (United States)

    Sánchez, Teresa; Dufour, Dominique; Moreno, Isabel Ximena; Ceballos, Hernán

    2010-04-28

    Functional properties of normal and waxy starches from maize, rice, potato, and cassava as well as the modified waxy maize starch COLFLO 67 were compared. The main objective of this study is to position the recently discovered spontaneous mutation for amylose-free cassava starch in relation to the other starches with well-known characteristics. Paste clarity, wavelength of maximum absorption (lambda(max)), pasting properties, swelling power, solubility, and dispersed volume fraction measurements and gel stability (acid and alkaline resistance, shear, refrigeration, and freeze/thaw stability) were evaluated in the different types and sources of starch included in this study. lambda(max) in the waxy cassava starch was reduced considerably in comparison with that of normal cassava starch (535 vs 592 nm). RVA peak viscosity of waxy cassava starch was larger than in normal cassava starch (1119 vs 937 cP) and assumed a position intermediate between the waxy potato and maize starches. Acid, alkaline, and shear stability of waxy cassava starch were similar to normal cassava except for alkaline pH, at which it showed a low effect. Gels from normal root and tuber starches after refrigeration and freeze/thaw had lower syneresis than cereal starches. Gels from waxy starches (except for potato) did not present any syneresis after 5 weeks of storage at 4 degrees C. Waxy cassava starch was the only one not showing any syneresis after 5 weeks of storage at -20 degrees C. Natural waxy cassava starch is, therefore, a promising ingredient to formulate refrigerated or frozen food.

  14. Gel characteristics and microstructure of fish myofibrillar protein/cassava starch composites.

    Science.gov (United States)

    Fan, Mingcong; Hu, Ting; Zhao, Siming; Xiong, Shanbai; Xie, Jing; Huang, Qilin

    2017-03-01

    The changes in fish myofibrillar protein/cassava starch composites in the starch fraction range from 0 to 1, with their total content maintained at 60mg/mL, were investigated in terms of textural properties, rheological behaviours, morphology, spatial distribution and protein molecular structure. The results revealed that the starch fraction of 0.5 was a critical point for the conversion of the protein matrix to starch matrix and conversion of the gel from elastic to weak. Moreover, the protein-starch synergistic effect on the storage modulus was strongest at fractions of 0.5 and 0.6, due to the formation of a semi-interpenetrating network, with more amylose from the melted starch granules interpenetrated with the protein molecules, and the absorption of water by the starch granules to concentrate the protein matrix. Additionally, no covalent interaction between the protein and starch occurred with increasing starch fraction, thus having no significant influence on the protein secondary structure.

  15. Poly(Lactic Acid Filled with Cassava Starch-g-Soybean Oil Maleate

    Directory of Open Access Journals (Sweden)

    Nopparut Kiangkitiwan

    2013-01-01

    Full Text Available Poly(lactic acid, PLA, is a biodegradable polymer, but its applications are limited by its high cost and relatively poorer properties when compared to petroleum-based plastics. The addition of starch powder into PLA is one of the most promising efforts because starch is an abundant and cheap biopolymer. However, the challenge is the major problem associated with poor interfacial adhesion between the hydrophilic starch granules and the hydrophobic PLA, leading to poorer mechanical properties. In this paper, soybean oil maleate (SOMA was synthesized by grafting soybean oil with various weight percents of maleic anhydride (MA using dicumyl peroxide (DCP as an initiator. Then, SOMA was employed for the surface modifying of cassava starch powder, resulting in SOMA-g-STARCH. The obtained SOMA-g-STARCH was mixed with PLA in various weight ratios using twin-screw extruder, resulting in PLA/SOMA-g-STARCH. Finally, the obtained PLA/SOMA-g-STARCH composites were prepared by a compression molding machines. The compatibility, thermal properties, morphology properties, and mechanical properties were characterized and evaluated. The results showed that the compatibility, surface appearance, and mechanical properties at 90 : 10 and 80 : 20 ratios of PLA/SOMA-g-STARCH were the best.

  16. Deep Assessment of Genomic Diversity in Cassava for Herbicide Tolerance and Starch Biosynthesis.

    Science.gov (United States)

    Duitama, Jorge; Kafuri, Lina; Tello, Daniel; Leiva, Ana María; Hofinger, Bernhard; Datta, Sneha; Lentini, Zaida; Aranzales, Ericson; Till, Bradley; Ceballos, Hernán

    2017-01-01

    Cassava is one of the most important food security crops in tropical countries, and a competitive resource for the starch, food, feed and ethanol industries. However, genomics research in this crop is much less developed compared to other economically important crops such as rice or maize. The International Center for Tropical Agriculture (CIAT) maintains the largest cassava germplasm collection in the world. Unfortunately, the genetic potential of this diversity for breeding programs remains underexploited due to the difficulties in phenotypic screening and lack of deep genomic information about the different accessions. A chromosome-level assembly of the cassava reference genome was released this year and only a handful of studies have been made, mainly to find quantitative trait loci (QTL) on breeding populations with limited variability. This work presents the results of pooled targeted resequencing of more than 1500 cassava accessions from the CIAT germplasm collection to obtain a dataset of more than 2000 variants within genes related to starch functional properties and herbicide tolerance. Results of twelve bioinformatic pipelines for variant detection in pooled samples were compared to ensure the quality of the variant calling process. Predictions of functional impact were performed using two separate methods to prioritize interesting variation for genotyping and cultivar selection. Targeted resequencing, either by pooled samples or by similar approaches such as Ecotilling or capture, emerges as a cost effective alternative to whole genome sequencing to identify interesting alleles of genes related to relevant traits within large germplasm collections.

  17. Polymeric flocculant based on cassava starch grafted polydiallyldimethylammonium chloride: Flocculation behavior and mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Razali, M.A.A.; Ariffin, A., E-mail: srazlan@usm.my

    2015-10-01

    Graphical abstract: - Highlights: • Flocculation performance of cassava grafted polyDADMAC was studied. • Turbidity and TSS removal increased with increasing grafting percentage. • The grafted polymer showed good removal in acidic and neutral region. • Zeta potential results pointed to the charge neutralization mechanism. • Flocs increased with increasing grafting percentage and molecular weight. - Abstract: In this work, flocculation properties of cassava starch grafted polydiallyldimethylammonium chloride (polyDADMAC) with different grafting percentages were investigated. Flocculation performance was evaluated in simulated kaolin suspension. The grafting percentages used were 1.76 %, 14.84 %, and 21.98 %. The effectiveness of the flocculation was measured based on the reduction of the turbidity and total suspended solids (TSSs), zeta potential measurements, particle size, and atomic force microscopy imaging. Grafted polymers improved the removal rate of turbidity and TSS compared with gelatinized starch, and the removal rate increased with increasing grafting percentage and dosage.

  18. Preparation of metal adsorbent from poly(methyl acrylate)-grafted-cassava starch via gamma irradiation

    Science.gov (United States)

    Suwanmala, Phiriyatorn; Hemvichian, Kasinee; Hoshina, Hiroyuki; Srinuttrakul, Wannee; Seko, Noriaki

    2012-08-01

    Metal adsorbent containing hydroxamic acid groups was successfully synthesized by radiation-induced graft copolymerization of methyl acrylate (MA) onto cassava starch. The optimum conditions for grafting were studied in terms of % degree of grafting (Dg). Conversion of the ester groups present in poly(methyl acrylate)-grafted-cassava starch copolymer into hydroxamic acid was carried out by treatment with hydroxylamine (HA) in the presence of alkaline solution. The maximum percentage conversion of the ester groups of the grafted copolymer, % Dg=191 (7.63 mmol/g of MA), into the hydroxamic groups was 70% (5.35 mmol/g of MA) at the optimum condition. The adsorbent of 191%Dg had total adsorption capacities of 2.6, 1.46, 1.36, 1.15 and 1.6 mmol/g-adsorbent for Cd2+, Al3+, UO22+, V5+ and Pb2+, respectively, in the batch mode adsorption.

  19. Nanocomposite-forming solutions based on cassava starch and laponite: viscoelastic and rheological characterization

    OpenAIRE

    2015-01-01

    Nanocomposites-forming solutions (NFS) based on cassava starch and laponite were prepared and next characterized by means of dynamic oscillatory and steady shear rheological tests to evaluate their ability to be processed by knife coating. The effects of speed (rpm) and homogenization time on the laponite dispersion characteristics were first analyzed. Laponite dispersions were affected by both process parameters. High speed (rpm), i.e. 20,000 or 23,000 rpm for 30 min or prolonged...

  20. Thermal and pasting properties of cassava starch-dehydrated orange pulp blends

    OpenAIRE

    Magali Leonel; Luciana Bronzi de Souza; Martha Maria Mischan

    2011-01-01

    Instant mixtures are easy to prepare and frequently present functional appeals. A quality parameter for instant mixtures is their rheological behavior. This study aimed at evaluating the effects of extrusion parameters on the pasting properties of cassava (Manihot esculenta L.) starch and dehydrated orange (Citrus sinensis (L.) Osbeck) pulp mixtures. The variable parameters were moisture of mixtures (12.5 to 19%), barrel temperature (40 to 90ºC) and screw rotation (170 to 266 rpm). The extrud...

  1. Effect of lactic acid and UV irradiation on the cassava and corn starches

    Directory of Open Access Journals (Sweden)

    Célia Maria Landi Franco

    2010-04-01

    Full Text Available In this work, the effect of lactic acid and UV irradiation on the physicochemical and structural characteristics of cassava and corn starches was evaluated. Only the modified cassava starch presented baking expansion capacity. From RVA, reduction of viscosity values, greater internal stability and none set back for modified cassava starch were observed. Modified corn starch did not show any peak viscosity. There were no significant differences in DSC thermal properties of treated and native starches. Amylopectin and amylose molecules from both the modified starches displayed some degradation. Molecular weight of cassava amylopectin was mostly preserved, whereas corn amylopectin was evenly attacked through the granule. Nevertheless, the B long branched chains of cassava amylopectin, with DP~37, were degraded whereas they were unchanged for corn amylopectin.Amido de mandioca modificado com ácido lático e radiação ultravioleta antes da secagem artificial têm mostrado boa capacidade de expansão, a exemplo da encontrada para o polvilho azedo. Neste trabalho, os efeitos do ácido lático e radiação UV sobre as características físico-químicas e estruturais de amidos de mandioca e milho foram investigados. Apenas o amido de mandioca modificado apresentou capacidade de expansão durante o forneamento. Do RVA, redução dos valores de viscosidade, boa estabilidade interna e nenhuma tendência a retrogradação para este amido modificado foi observado. O amido de milho não apresentou qualquer pico de viscosidade após modificação. Não foram observadas diferenças significativas nas propriedades térmicas, determinadas em DSC, entre os amidos nativos e modificados de ambas as fontes. As moléculas de amilopectina e amilose de ambos os amidos modificados mostraram alguma degradação. O peso molecular da amilopectina do amido de mandioca foi mais preservado, enquanto a amilopectina do amido de milho foi mais atacada em todo o grânulo. As

  2. Optimization of single-cell-protein production from cassava starch using Schwanniomyces castellii.

    Science.gov (United States)

    Hongpattarakere, T; H-Kittikun, A

    1995-11-01

    Schwanniomyces castellii B5285 grew faster and produced greater biomass and higher protein yield than either S. alluvius ATCC 26074 or S. alluvius 81Y when these amylolytic yeasts were grown with 2% (w/v) cassava starch as sole C source. With 0.5% (w/v) glutamate as N source, S. castellii reached 7.12 g cell dry mass/l, with a protein yield of 6.4 g/100 g starch. The optimal agitation speed, aeration rate and pH for growth of this yeast in a fermenter were 400 rev/min, 1.67 vol./vol.min. and 5.0, respectively. Tween 80 at 0.1% increased cell dry mass to 8.90 g/l, cell yield to 44 g/100 g starch and protein yield to 7.4 g/100 g starch.

  3. Performance of Cassava Starch as a Proton Exchange Membrane in a Dual Chambered Microbial Fuel Cell.

    Directory of Open Access Journals (Sweden)

    Livinus A. Obasi

    2012-01-01

    Full Text Available This research work shows the feasibility of power generation in a mediatorless dual chambered microbial fuel cell, utilizing cassava starch as the proton exchange membrane (PEM. The study employed swine house effluent (a serious environmental threat as the substrate (fuel (pH, 7.2, BOD: 1200mg/l, COD: 3800mg/l in the anode chamber prepared with a phosphate buffer solution (K2HPO4+KH2PO4, potassium ferry cyanide solution served as the oxygen acceptor in the cathode chamber using graphite electrodes, the cell operating at room temperature (27 ± 30C. The PEM (gelatinized cassava starch was prepared with varying degrees of modifications for three cells, ranging from the untreated pure starch (A, starch treated with 5.9% sodium chloride (B and starch modified with sodium alginate (a gum and activated carbon (C. The open circuit voltages (OCV and powerperformances of the three cells were monitored for ten days. Each of the cells was inoculated with the adopted consortium in soil solution obtained from mangrove forest. The maximum power outputs from the cells were 945.69mW/m2, 1068.54 mW/m2 and 570.83 mW/m2 for A, B and C respectively.

  4. quantification of starch physicochemical characteristics in a cassava ...

    African Journals Online (AJOL)

    Administrator

    18-24 hr and stored in dry plastic air tight containers at room temperature until ... maximum output of the total utilisable solid matter within the crop. ..... characteristics of starch based on their effect on ..... of adhesives and in the use of starch as a binder. The amylose .... poly(hydroxyester ether) composite materials. Polymer ...

  5. Sugar-mediated semidian oscillation of gene expression in the cassava storage root regulates starch synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Jansson, Christer; Baguma, Yona; Sun, Chuanxin; Boren, Mats; Olsson, Helena; Rosenqvist, Sara; Mutisya, Joel; Rubaihayo, Patrick R.; Jansson, Christer

    2008-01-15

    Starch branching enzyme (SBE) activity in the cassava storage root exhibited a diurnal fluctuation, dictated by a transcriptional oscillation of the corresponding SBE genes. The peak of SBE activity coincided with the onset of sucrose accumulation in the storage, and we conclude that the oscillatory mechanism keeps the starch synthetic apparatus in the storage root sink in tune with the flux of sucrose from the photosynthetic source. When storage roots were uncoupled from the source, SBE expression could be effectively induced by exogenous sucrose. Turanose, a sucrose isomer that cannot be metabolized by plants, mimicked the effect of sucrose, demonstrating that downstream metabolism of sucrose was not necessary for signal transmission. Also glucose and glucose-1-P induced SBE expression. Interestingly, induction by sucrose, turanose and glucose but not glucose-1-P sustained an overt semidian (12-h) oscillation in SBE expression and was sensitive to the hexokinase (HXK) inhibitor glucosamine. These results suggest a pivotal regulatory role for HXK during starch synthesis. Abscisic acid (ABA) was another potent inducer of SBE expression. Induction by ABA was similar to that of glucose-1-P in that it bypassed the semidian oscillator. Both the sugar and ABA signaling cascades were disrupted by okadaic acid, a protein phosphatase inhibitor. Based on these findings, we propose a model for sugar signaling in regulation of starch synthesis in the cassava storage root.

  6. Household characteristics and market participation competence of smallholder farmers supplying cassava to starch processors in Nigeria

    Directory of Open Access Journals (Sweden)

    Ifeanyi A Ojiako

    2016-12-01

    Full Text Available The household head characteristics of smallholder cassava farmers supplying raw materials to the major commercial starch processors in Nigeria were examined alongside their market participation categories. A multi-stage random sampling technique was used to select 96 farmers working in clusters in the eight cassava producing states. Data were analyzed using a combination of descriptive and inferential statistics, including the use of independent sample t-test technique to compare farmer's characteristics for the farmers' market participation categories. Results revealed that majority of the farmers were farming for subsistence with only 19.80% selling up to 50% of their farm produce as against 80.20% who sold less. Average mean values were found to be higher for the high market participants compared with the low participants for the age, farming experiences, education, farm size, gender, marital status, household size, training, season of harvesting and fertilizer use, but lower for use of credit, improved cassava variety, harvesting method, farming time devotion, and road access. Only farm size, gender and harvesting season at p<0.01 level and training at p<0.05 level were found to be statistically significant in distinguishing the high and low market participation categories. Policies and programmes aimed at promoting market participation among cassava farmers in Nigeria should be more impactful if directed at these significant factors.

  7. Direct detection of toxigenic Bacillus cereus in dietary complement for children and cassava starch

    Directory of Open Access Journals (Sweden)

    Jnnifer A. Sánchez

    2015-09-01

    Full Text Available Bacillus cereus is a food contaminant anda known human pathogen that can causeemetic and diarrheal syndromes. In this studywe evaluated the presence of toxigenic B.cereus by multiplex PCR directly in dietarycomplement for children and cassava starchsamples collected on Medellin, Colombia.Of 75 dietary complement for childrensamples evaluated, 70.7% were contaminatedwith toxigenic B. cereus and four differenttoxigenic consortia were detected: I: nheA,hblC, cytK (9.8%, II: nheA, hblC (2%,III: hblC, cytK (41.2%, IV: hblC (47%.Of 75 cassava starch samples, 44% werecontaminated with toxigenic B. cereus andfour different toxigenic consortia weredetermined: I: nheA, hblC, cytK (48.5%,II: nheA, hblC, cytK, cesB (3%, III: hblC,cytK (30.3%, IV: hblC (18.2%. In general,in dietary complement for children onlyenterotoxigenic consortia were detectedwhile in cassava starch the enterotoxigenicconsortia predominated over the emetic.Multiplex PCR was useful to detect toxigenicB. cereus contamination allowing directand simultaneous detection of all toxingenes in foods. This study is the first inColombia to evaluate toxigenic B. cereus,providing information of importance formicrobiological risk evaluation in driedfoods.

  8. High-Level Butanol Production from Cassava Starch by a Newly Isolated Clostridium acetobutylicum.

    Science.gov (United States)

    Li, Shubo; Guo, Yuan; Lu, Fuzhi; Huang, Jiajian; Pang, Zongwen

    2015-10-01

    A new Clostridium acetobutylicum strain, exhibiting the ability to resist butanol stress and produce butanol, was identified and named GX01. Strain GX01 can use a wide variety of carbohydrates, especially cassava starch, to produce butanol. After the optimization of culture conditions, C. acetobutylicum GX01 could produce 27.3 g/L solvent, including 17.1 g/L butanol, 7.9 g/L acetone, and 2.3 g/L ethanol, from 100 g/L cassava flour and 3 g/L soybean meal. Furthermore, when its acetone-butanol-ethanol (ABE) fermentation was performed in 10- and 30-L bioreactors, the production of total solvent and butanol reached 29.2 and 18.3 g/L, respectively, and 28.8 and 18.8 g/L, respectively. Thus, the high level and stability of butanol production make strain GX01 a promising candidate for ABE fermentation using the low-cost cassava starch.

  9. Seasonal effects on the physico-chemical properties of starch from four cultivars of cassava

    Energy Technology Data Exchange (ETDEWEB)

    Asaoka, M.; Blanshard, J.M.V. (Nottingham Univ. (United Kingdom). Dept. of Applied Biochemistry and Food Science); Rickard, J.E. (Natural Resources Inst., Chatham (United Kingdom))

    1991-12-01

    Four varieties of cassava plants were cultivated at CIAT in Columbia and harvested on four different occasions with a view to evaluating whether there was any relationship between the texture of the cooked roots and the constituent starch. The organoleptic qualities of the cooked roots showed considerable differences in 'glassiness' and hardness of texture, both between varieties and times of harvest. The starch granules were isolated and examined by a variety of techniques. The size of the granules did vary with the seasons but there were only minor differences in the X-ary crystallinity, the elution patterns of iso-amylase-debranched material (including the amylose content), the proximate composition of the starch and the time course of digestion by glucoamylase. None of these provided a basis for explaining the differences in cooked texture. (orig.).

  10. Morphological and mechanical properties of thermoplastic starch (TPS) and its blend with poly(lactic acid)(PLA) using cassava bagasse and starch; Caracterizacao morfologica e mecanica de amidos termoplasticos (TPS) e suas blendas com poliacido latico (PLA) utilizando bagasso e amido de mandioca

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Eliangela de M.; Correa, Ana C.; Campos, Adriana de; Marconcini, Jose M.; Mattoso, Luiz H.C. [Embrapa Instrumentacao Agropecuaria-CNPdia, Laboratorio Nacional de Nanotecnologia para o Agronegocio - LNNA, Sao Carlos, SP (Brazil); Curvelo, Antonio A.S. [Universidade de Sao Paulo-USP, Instituto de Quimica da USP de Sao Carlos, SP (Brazil)

    2011-07-01

    This study aims the use of an agro waste coming from the industrialization of cassava starch, known as cassava bagasse (BG). This material contains residual starch and cellulose fibers which can be used to obtain thermoplastic starch (TPS) and /or blends reinforced with fibers. In this context, it was prepared a thermoplastic starch with BG (TPSBG) and evaluated the incorporation of 20wt% of it into the biodegradable polymer poly (lactic acid) (PLA), resulting in a blend PLA/TPSBG20. The materials were investigated through morphology (scanning electron microscopy with field emission gun (FEG), x-ray diffraction (XRD), and mechanical behavior (tensile test). Their properties were compared to the blend PLA/TPSI20 in which TPSI is obtained from commercial cassava starch. The results showed that the use of bagasse generates homogenous materials with higher mechanical strength if compared to TPS obtained from commercial cassava starch. The fiber in this residue acted as reinforcement for TPS and PLA/TPS systems. (author)

  11. Structural and Digestion Properties of Soluble-, Slowly Digestible and Resistant Maltodextrin from Cassava Starch by Enzymatic Modification

    DEFF Research Database (Denmark)

    Sorndech, Waraporn

    The combination of branching enzyme (BE) and amylomaltase (AM) were selected to modify cassava starch. AM were used to elongate the glucan chains in order to enhance BE activity to create branching linkages. Cassava starch were gelatinized and incubated with BE or AMBE or BEAMBE or simultaneous...... AM and BE. The molecular analysis of the products including amylopectin chain length distribution, content of α-1,6 glucosidic linkages, absolute molecular weight distribution and digestibility were examined. Only BE catalysis showed 7.8% of branching linkages. The sequential AMBE-treated starch...... showed 9.9%-10.0% branching linkages, while the sequential BEAMBE-treated starch gained 10.9%-13.1% of branching linkages. Moreover, the sequential AMBE and BEAMBE-treated starch retarded the digestion rate of α-amylase and glucoamylase. Overall, sequential BEAMBE catalysis resulted in more...

  12. Saccharification of cassava starch by Saccharomycopsis fibuligera YCY1 isolated from Loog-Pang (rice cake starter

    Directory of Open Access Journals (Sweden)

    Aran H-Kittikun

    2008-04-01

    Full Text Available The main objectives of this study were to select amylolytic yeasts from Loog-Pang, a traditional starter culture for production of alcoholic foods and drinks in southern Thailand, and to optimize the saccharification of cassava starch to reducing sugar by the selected yeast isolate. Seventy-four yeast isolates were obtained from ten samples of Loog-Pang. The isolates were tested for amylolytic activity on Yeast-Peptone Cassava medium (YPC contained 30 g/l of cassava starch.Only three isolates showed amylolytic activity which produced clear zone on the YPC agar. The best amylolytic strain with clear zone of 8 mm was identified by 26s rDNA as Saccharomycopsis fibuligera. The optimum medium for saccharification by Saccharomycopsis fibuligera. YCY1 was only 50 g/l of cassava starch in distilled water without nitrogen sources added and pH adjustment. The optimal saccharification conditions were 200 ml cassava starch (50 g/l in 500 ml Erlenmeyer flask, shaking at 100 rpm and 37oC. Under these conditions, the highest reducing sugar was obtained 46±0.53 g/l after 120 h cultivation (84% of the theoretical yield.

  13. Summarization of Cassava Starch Deep Processing Products%木薯淀粉深加工产品概述

    Institute of Scientific and Technical Information of China (English)

    姚丹; 梁智

    2012-01-01

    木薯是广西的一大经济作物,是"三薯"作物之一。木薯的块茎是做淀粉的主要原料,木薯淀粉以其特有的特性,制淀粉和深加工制变性淀粉,具有优势,应用也十分广泛。除此之外,其它衍生物产品应用广泛,不断研究出新的产品。%Cassava is one important economic crop in Guangxi,one of three main tuber crops(cassava,potato and sweet potato) in the world.Tuber of cassava is key raw material for production of starch.Native starch and modified starch made from cassava possess great advantages and can be applied in a wide variety of fields.Moreover,derivatives of cassava starch can be used for many aims and new products keep emerging from continuous research.

  14. Thermoanalytical and starch content evaluation of cassava bagasse as agro-industrial residue

    Directory of Open Access Journals (Sweden)

    Luiz Gustavo Lacerda

    2009-11-01

    Full Text Available Starch nutritional fractions as well as thermal properties and other analysis are essential for food and industrial application. Cassava bagasse is an important agro-industrial residue and its starch content was evaluated using two alternative methods. Thermal characterization and microscopy analyses helped to understand how hydrolysis digests starchy fraction of cassava bagasse. The melting point of cassava starch occurred at 169.2ºC. Regarding TG analyses, after moisture content, there were observed two main mass losses for all samples. Results suggest hydrolysis carried out using enzyme is less effective in order to convert total starch content in cassava bagasse. However, using sulfuric acid, fibers are affected by analyses conditions.As frações nutricionais bem como as propriedades térmicas e outras análises são essenciais para a indústria de alimentos e suas aplicações O bagaço de mandioca é um importante resíduo agroindustrial e seu teor de amido foi avaliado por dois métodos alternativos. A caracterização por análise térmica e microscopia ajudou na compreensão de como a hidrólise digere a fração amilácea do bagaço de mandioca, O ponto de fusão foi de 170ºC, a análise termogravimétrica (TG mostrou após a perda de umidade do material, duas principais perdas de massa em todas as amostras analisadas. Os resultados sugerem que a hidrólise enzimática é menos eficiente na conversão total de amido no bagaço de mandioca. No entanto, o uso de ácido sulfúrico degradou até mesmo a parcela fibrosa do material, afetando as condições de análise.

  15. Performance of Cassava Starch as a Proton Exchange Membrane in a Dual Chambered Microbial Fuel Cell.

    OpenAIRE

    Livinus A. Obasi; Charles C. Opara; Akuma Oji

    2012-01-01

    This research work shows the feasibility of power generation in a mediatorless dual chambered microbial fuel cell, utilizing cassava starch as the proton exchange membrane (PEM). The study employed swine house effluent (a serious environmental threat) as the substrate (fuel) (pH, 7.2, BOD: 1200mg/l, COD: 3800mg/l) in the anode chamber prepared with a phosphate buffer solution (K2HPO4+KH2PO4), potassium ferry cyanide solution served as the oxygen acceptor in the cathode chamber using graphite ...

  16. AMMI Model for Interpreting Clone-Environment Interaction in Starch Yield of Cassava

    Directory of Open Access Journals (Sweden)

    SHOLIHIN

    2011-03-01

    Full Text Available The aim of the study was to analyze the interaction between clone and environment for starch yield in six month-old plants of cassava clones based on additive main effects and multiplicative interaction (AMMI model. The experiments were conducted on mineral soil in four different locations: Lumajang (inceptisol, Kediri (entisol, Pati (alfisol, and Tulangbawang (ultisol. The experiments were carried out during 2004-2005, using a split plot design withthree replications. The main plots were the simple and the improved technology. The clones used were fifteen clones. Parameter recorded was starch yield (kg/ha of the 6 month old plants. The data were analyzed using the AMMI model. Based on the AMMI analysis, environmental factors being important in determining the stability of the starch yield were soil density for subsoil, pH of topsoil, and the maximum air humidity four months after planting. The clones of CMM97001-87, CMM97002-183, CMM97011-191, CMM97006-44, and Adhira 4 were identified as stable clones in starch yield within 6 month-old plants. CMM97007-235 was adapted to maximum relative humidity 4 months after planting and to lower pH of topsoil, whereas, MLG 10311 was adapted to lower bulk density. The mean starch yield of MLG 10311 was the highest six months after planting.

  17. Effect of Soil Burial on Tensile Properties of Polypropylene/Plasticized Cassava Starch Blends

    Directory of Open Access Journals (Sweden)

    Henry C. Obasi

    2013-01-01

    Full Text Available Polypropylene (PP/plasticized cassava starch (PCS blended with and without compatibilizer (polypropylene-graft-maleic anhydride (PP-g-MA via melt blending were prepared for soil burial which lasted for 90 days. Plasticized starch loadings of 0, 10, 20, 30, 40, and 50 wt.% were used, while pp-g-ma was used at 10 wt.% based on starch weight. The PP/PCS and PP/PCS/PP-G-MA blends were evaluated for their tensile properties. It was observed that the tensile strength, elongation at break, and young’s modulus decreased with increases in soil burial time as well as starch content for PP/PCS blends. Similar treads for the tensile properties were observed for PP/PCS/PP-g-MA, but with higher properties as compared to uncompatibilized blends. However, the tensile properties for both PP/PCS and PP/PCS/PP-g-Ma decrease with increases in starch loading and also as the burial period progressed.

  18. Robust and biodegradable polymer of cassava starch and modified natural rubber.

    Science.gov (United States)

    Riyajan, Sa-Ad

    2015-12-10

    The application of starch based materials for packaging purposes has attracted significant interest because they are both cheap and renewable resources. The study investigated the preparation and properties of a novel biopolymer sheet produced from a blend of maleated epoxidized natural rubber (MENR) and natural rubber-g-cassava starch (NR-g-CSt). The water resistance, toluene resistance and elongation at break of the polymer blend were enhanced after the addition of the MENR compared to pristine NR-g-CSt. The maximum tensile strength and thermal stability of the NR-g-CSt/MENR blend were found in the 100:50 NR-g-CSt:MENR blend. The novel films demonstrated good biodegradability in soil.

  19. Characterization of cassava starch based foam blended with plant proteins, kraft fiber, and palm oil.

    Science.gov (United States)

    Kaisangsri, Nattapon; Kerdchoechuen, Orapin; Laohakunjit, Natta

    2014-09-22

    Cassava starch foam (CSF) trays blended with zein, gluten, soy protein, kraft fiber, and palm oil at various concentrations: 0, 5, 10 and 15% by weight of starch, were characterized. The addition of zein and gluten into CSF resulted in consolidated and homogeneous structural foams compared to its controls. Moreover, the flexural and compressive strength increased with increasing kraft, zein and gluten. CSF containing 15% kraft gave the highest flexural and compressive strength. However, the addition of palm oil into CSF gave the lowest flexural strength and compressive strength. The observed water absorption and water solubility index of CSFs blended with 15% zein and 15% gluten protein was lowest. Although kraft, zein and gluten could improve mechanical properties, water absorption and water solubility were greater than the expanded polystyrene foam (EPS). The CSF trays in this study might be an alternative for packing low water content foods.

  20. Synthesis and characterisation of simultaneous interpenetrating polymer networks (SIN formed by polystyrene and polyurethane obtained from castor oil and cassava starch polyol-suspensions

    Directory of Open Access Journals (Sweden)

    Juan Manuel Cabrera Anaya

    2011-01-01

    Full Text Available Castor oil was modified by transesterification with pentaerythritol and cassava starch was subsequently incorporated into this oil (oil modified by incorporating starch is called a polyol-suspension. Polyurethane/polystyrene SINs (simulta- neously produced IPNs were synthesised from them and styrene. Reactants used in the synthesis were MDI (methylene diphenyl diisocyanate as diisocyanate, DVB (divinylbenzene as crosslinking agent for polystyrene, dibutylamine as redox primer and benzoyl peroxide as styrene polymerisation primer. The variables considered in SIN synthesis were percentage weight ratio used in the modification (1.32%; 2.64% and 5.28% to increase polyol hydroxyl functionality, starch species incorporated into polyol (Brazilian, Venezuelan and commercial to vary the amount of amylopectin within the polyol-suspension, diisocyanate/hydroxyl NCO/OH (0.85 and 1 functional groups’ molar ratio and polyurethane/ polystyrene PU/PS weight ratio (70/30 and 80/20. A wide range of materials was obtained and characterised by tensile strength, hardness, chemical attack and Soxhlet extraction. The physical-mechanical properties of the materials produced with polyols (transesterified castor oil were improved when starch was incorporated into the polyol. Several tests indicated that 24 hours as curing time were not enough, because the SINs showed lower physical-mechanical properties than the homologous polyurethane elastomers did; thus, the curing time had to be increased to 48 hours.

  1. Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

    Directory of Open Access Journals (Sweden)

    Lívia Giolo Taverna

    2012-12-01

    Full Text Available Given the broad acceptance of sour cassava starch biscuits in Brazil and the nutritional quality of quinoa flour, this study aimed to evaluate the effect of extrusion temperature, screw speed, moisture, and amount of quinoa flour on the physical properties of puffed snacks. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Effects of moisture and amount of quinoa flour on the expansion index and specific volume of snacks were observed. There was a pronounced increase in water solubility index of blends with the extrusion process with significant effects of all process parameters on the WSI. Higher water absorption index (WAI was observed under high temperature, low moisture, and lower quinoa flour amount. Temperature and amount of quinoa flour influenced the color of the snacks. A positive quadratic effect of quinoa flour on hardness of products was observed. Blends of sour cassava starch and quinoa flour have good potential for use as raw material in production of extruded snacks with good physical properties.

  2. Biobased Polystyrene Foam-like Material from Crosslinked Cassava Starch and Nanocellulose from Sugarcane Bagasse

    Directory of Open Access Journals (Sweden)

    Parichat Phaodee

    2014-11-01

    Full Text Available This research aimed to study the effect of lignin, natural rubber latex (NRL, nanocellulose, and talc on production of biobased foam using cassava starch as matrix. Comparison study on lignin extraction from sugarcane bagasse (SCB for different types of base (KOH and NaOH, concentration (10 %w/w and 40 %w/w, and temperatures (60 C for 3 h and 120 C for 1 h was performed. The most suitable isolation condition giving the highest yield of lignin and lowest hemicellulose contamination was 40 %KOH at 120 oC for 1 h. A mechanical method was superior to a chemical method for cellulose size reduction owing to more appropriate size distribution and uniformity of nanocellulose. The most favorable proportion of foam contained 20% nanocellulose, 3% talc, 0.1% NRL, 38.5% water, and 76.9% crosslinked cassava starch. These conditions resulted in favorable flexural strength, modulus, and percentage of elongation, analogous to polystyrene foam. An appropriate amount of added lignin increased the elasticity of biofoam.

  3. Experimental study on drying kinetic of cassava starch in a pneumatic drying system

    Science.gov (United States)

    Suherman, Kumoro, Andri Cahyo; Kusworo, Tutuk Djoko

    2015-12-01

    The aims of this study are to present the experimental research on the drying of cassava starch in a pneumatic dryer, to describe its drying curves, as well as to calculate its thermal efficiency. The effects of operating conditions, namely the inlet air temperature (60-100 °C) and solid-gas flow rate ratio (Ms/Mg 0.1-0.3) were studied. Heat transfer is accomplished through convection mechanism in a drying chamber based on the principle of direct contact between the heated air and the moist material. During the drying process, intensive heat and mass transfer between the drying air and the cassava starch take place. In order to meet the SNI standards on solid water content, the drying process was done in two cycles. The higher the temperature of the drying air, the lower the water content of the solids exiting the dryer. Thermal efficiency of the 2nd cycle was found to be lower than the 1st cycle.

  4. Use of dried waste of cassava starch extraction for feeding lactating cows

    Directory of Open Access Journals (Sweden)

    TATIANE FERNANDES

    2015-06-01

    Full Text Available The aim of this study was to determine the best level of utilization of dried waste of cassava starch extraction (WCSEd as a substitute for corn for lactating cows. Four lactating cows were fed diets with increasing levels (0%, 33%, 66% and 100% of WCSEd as a substitute for corn. The intake and digestibility of dry matter and nutrients, milk production and composition, blood parameters of glucose and urea and microbial synthesis of the diets were evaluated. There was a reduction in dry matter intake, organic matter, ether extract and total carbohydrate, and increased intake of acid detergent fiber. Nutrient digestibility was not affected while the synthesis of microbial protein increased. These changes resulted in reduced milk production, without altering the efficiency of production or the constituents of milk, with a decreasing effect on daily production of lactose, solids and minerals. Metabolic parameters, glucose and urea nitrogen in plasma, remained within appropriate levels. The dried residue from the extraction of cassava starch can be used as feed for dairy cows to replace up to 100% of the corn ration. However, its use promotes a reduction in intake of dry matter and nutrients as well as a reduction in the production of milk, with impacts on the profitability of the product.

  5. High temperature simultaneous saccharification and fermentation of starch from inedible wild cassava (Manihot glaziovii) to bioethanol using Caloramator boliviensis.

    Science.gov (United States)

    Moshi, Anselm P; Hosea, Ken M M; Elisante, Emrode; Mamo, G; Mattiasson, Bo

    2015-03-01

    The thermoanaerobe, Caloramator boliviensis was used to ferment starch hydrolysate from inedible wild cassava to ethanol at 60°C. A raw starch degrading α-amylase was used to hydrolyse the cassava starch. During fermentation, the organism released CO2 and H2 gases, and Gas Endeavour System was successfully used for monitoring and recording formation of these gaseous products. The bioethanol produced in stoichiometric amounts to CO2 was registered online in Gas Endeavour software and correlated strongly (R(2)=0.99) with values measured by HPLC. The organism was sensitive to cyanide that exists in cassava flour. However, after acclimatisation, it was able to grow and ferment cassava starch hydrolysate containing up to 0.2ppm cyanide. The reactor hydrogen partial pressure had influence on the bioethanol production. In fed-batch fermentation by maintaining the hydrogen partial pressure around 590Pa, the organism was able to ferment up to 76g/L glucose and produced 33g/L ethanol.

  6. Vinil polyacetate-cassava starch graft copolymer as coal dust suppressing agent

    Energy Technology Data Exchange (ETDEWEB)

    Luis Montero; Rafael Gonzalez; Edwin Primera; Juan Barcenas; R. Barranco [Universidad del Atlantico, Barranquilla (Colombia). Coal Research Centre and Polymer Research Centre, Engineering Faculty

    2007-07-01

    Graft copolymerisation of vinyl polyacetate (VPA) onto both native (NS) and oxidised (OS) cassava (manihot esculenta) starch was carried out. The OS-VPA graft copolymer gave the higher percentage of VPA at 74%, while that of NC-VPA showed the greater starch yield and higher rate of copolymerisation at 64%. The polymeric emulsions obtained with both starches were tested as coal dust suppressing agents. The tests were performed in a wind tunnel. Coal samples of a specific size distribution were sprayed with an aqueous polymeric emulsion ie. VPA + copolymer + residual starch, and sun dried, before being subjected to a 30 mph air stream. The performance of the polymeric dispersion when using a dosage between 2 and 4 g per 100 in{sup 2}, and solid concentrations of 2.5 and 5 %w/w, was satisfactory, giving coal dust losses of less than 0.5%. The addition of a surfactant remarkably enhanced the dust abatement properties of the polymeric emulsion, so as for a low dosage of 1.5 g per 100 in{sup 2}, the dust losses were virtually negligible. 7 refs., 1 figs., 1 tab.

  7. Carboxymethylation of Cassava Starch in Different Solvents and Solvent-Water Mixtures: Optimization of Reaction Conditions

    Science.gov (United States)

    Nwokocha, Louis M.; Ogunmola, Gabiel B.

    The influence of reaction medium on carboxymethylation process was investigated by treating cassava starch with sodium monochloroacetate in different solvents and solvent-water mixtures under alkaline conditions. The amount of carboxyl groups introduced into the starch moiety was determined titrimetrically and used to calculate the Degree of Substitution (DS) and Reaction Efficiency (RE). The results showed that carboxymethylation is significantly affected by the nature of reaction medium at p<0.05. Carboxymethylation in different solvent-water mixtures showed that aqueous 80% n-propanol offered the best medium for carboxymethylation. Optimization of reaction conditions in aqueous 80% n-propanol showed that the best condition for carboxymethylation was at starch-liquor ratio of 1:3, NaOH/reagent molar ratio of 4.0 and reagent-starch molar ratio of 0.35. An increase in temperature was required to effect the reaction at shorter time. At 55°C the highest values of DS and RE achieved in 0.5 h would require three hours to achieve the same values of DS and RE at 45°C.

  8. Effect of genotype and genotype by environment interaction on total cyanide content, fresh root, and starch yield in farmer‐preferred cassava landraces in Tanzania

    National Research Council Canada - National Science Library

    Mtunguja, Mariam K; Laswai, Henry S; Kanju, Edward; Ndunguru, Joseph; Muzanila, Yasinta C

    2016-01-01

    .... Cassava genotypes have varying maturity periods that are also environmental dependent. This study aimed at identifying suitable cultivars and optimum time of harvest to maximize starch production across three environments...

  9. Edible films based on cassava starch and fructooligosaccharides produced by Bacillus subtilis natto CCT 7712.

    Science.gov (United States)

    Bersaneti, Gabrielly Terassi; Mantovan, Janaina; Magri, Agnes; Mali, Suzana; Celligoi, Maria Antonia Pedrine Colabone

    2016-10-20

    The objectives of this work were to produce fructooligosaccharides (FOSs) by using the microorganism Bacillus subtilis natto CCT 7712 and to employ these FOSs as a functional ingredient in cassava starch edible films, which were characterized according to their microstructure, mechanical and barrier properties. The produced FOSs could be easily dissolved, resulting in homogeneous filmogenic solutions, which were easily manipulated to obtain films by casting. FOSs were added in different concentrations (0, 1, 5 and 10g/100g solids), and glycerol was used as a plasticizer (20g/100g solids). All formulations resulted in films that had a good appearance and were easily removable from the plates without bubbles or cracks. The FOSs exerted a plasticizing effect on the starch films and decreased their glass transition temperature. The addition of FOSs resulted in higher solubility and elongation and a decreased water vapor permeability of the films. FOSs were shown to be a promising ingredient for use in edible starch films. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Cassava starch films containing acetylated starch nanoparticles as reinforcement: Physical and mechanical characterization.

    Science.gov (United States)

    Teodoro, Ana Paula; Mali, Suzana; Romero, Natália; de Carvalho, Gizilene Maria

    2015-08-01

    This paper reports the use of acetylated starch nanoparticles (NPAac) as reinforcement in thermoplastic starch films. NPAac with an average size of approximately 500 nm were obtained by nanoprecipitation. Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) indicated that NPAac are more thermally stable and essentially amorphous when compared with acetylated starch. Thermoplastic starch films with different proportions of NPAac (0.5, 1.0, 1.5, 10.0%, w/w) were obtained and characterized by scanning electron microscopy (SEM), water vapor permeability (WVP), adsorption isotherms, TGA and mechanical tests. The inclusion of reinforcement caused changes in film properties: WVP was lowered by 41% for film with 1.5% (w/w) of NPAac and moisture adsorption by 33% for film with 10% (w/w) of NPAac; and the Young's modulus and thermal stability were increased by 162% and 15%, respectively, for film with 0.5% (w/w) of NPAac compared to the starch film without the addition of NPAac. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Proteomics Profiling Reveals Carbohydrate Metabolic Enzymes and 14-3-3 Proteins Play Important Roles for Starch Accumulation during Cassava Root Tuberization.

    Science.gov (United States)

    Wang, Xuchu; Chang, Lili; Tong, Zheng; Wang, Dongyang; Yin, Qi; Wang, Dan; Jin, Xiang; Yang, Qian; Wang, Liming; Sun, Yong; Huang, Qixing; Guo, Anping; Peng, Ming

    2016-01-01

    Cassava is one of the most important root crops as a reliable source of food and carbohydrates. Carbohydrate metabolism and starch accumulation in cassava storage root is a cascade process that includes large amounts of proteins and cofactors. Here, comparative proteomics were conducted in cassava root at nine developmental stages. A total of 154 identified proteins were found to be differentially expressed during starch accumulation and root tuberization. Many enzymes involved in starch and sucrose metabolism were significantly up-regulated, and functional classification of the differentially expressed proteins demonstrated that the majority were binding-related enzymes. Many proteins were took part in carbohydrate metabolism to produce energy. Among them, three 14-3-3 isoforms were induced to be clearly phosphorylated during storage root enlargement. Overexpression of a cassava 14-3-3 gene in Arabidopsis thaliana confirmed that the older leaves of these transgenic plants contained higher sugar and starch contents than the wild-type leaves. The 14-3-3 proteins and their binding enzymes may play important roles in carbohydrate metabolism and starch accumulation during cassava root tuberization. These results not only deepened our understanding of the tuberous root proteome, but also uncovered new insights into carbohydrate metabolism and starch accumulation during cassava root enlargement.

  12. Obtaining a Flexible Film Elaborated from Cassava Thermoplastic Starch and Polylactic Acid

    Directory of Open Access Journals (Sweden)

    Germán A. Arboleda

    2015-01-01

    Full Text Available A flexible film was obtained from a blend of cassava thermoplastic starch and polylactic acid, using maleic anhydride as coupling agent. For this, an experimental design with three factors was used: polylactic acid content, coupling agent content, and temperature profile of the blown extrusion. It was found that the three factors generated significant differences on the response variables of tensile mechanical properties individually as in their triple interaction. Differential scanning calorimetry (DSC was used by understanding the behavior of thermal properties of TPS/PLA blends with and without coupling agent, finding similar results between both. From this, the combination with 28% polylactic acid, 0.87% coupling agent, and 155.75°C temperature profile permitted the obtaining of a material with outstanding mechanical properties and offered advantages from the economic point of view.

  13. Effect of fermentation conditions on biohydrogen production from cassava starch by anaerobic mixed cultures

    Science.gov (United States)

    Tien, Hai M.; Le, Kien A.; Tran, An T.; Le, Phung K.

    2016-06-01

    In this work, a series of batch tests were conducted to investigate the effect of pH, temperature, fermentation time, and inoculums ratio to hydrogen production using cassava starch as a substrate. The statistical analysis of the experiment indicated that the significant effects for the fermentation yield were the main effect of temperature, pH and inoculums ratio. It was fouund that the suitable fermentation conditions of biohydrogen production should be at temperature 40 ° C; pH 6.5, inoculums to medium ratio 10 % and COD operation at 4800 g/mL. The maximum value of hydrogen volume produced was 76.22 mL. These affected has been evaluated and the result can be used as an reference for the pilot or industrial biohydrogen production.

  14. Quantitative trait loci and candidate genes associated with starch pasting viscosity characteristics in cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Thanyasiriwat, T; Sraphet, S; Whankaew, S; Boonseng, O; Bao, J; Lightfoot, D A; Tangphatsornruang, S; Triwitayakorn, K

    2014-01-01

    Starch pasting viscosity is an important quality trait in cassava (Manihot esculenta Crantz) cultivars. The aim here was to identify loci and candidate genes associated with the starch pasting viscosity. Quantitative trait loci (QTL) mapping for seven pasting viscosity parameters was carried out using 100 lines of an F1 mapping population from a cross between two cassava cultivars Huay Bong 60 and Hanatee. Starch samples were obtained from roots of cassava grown in 2008 and 2009 at Rayong, and in 2009 at Lop Buri province, Thailand. The traits showed continuous distribution among the F1 progeny with transgressive variation. Fifteen QTL were identified from mean trait data, with Logarithm of Odds (LOD) values from 2.77-13.01 and phenotype variations explained (PVE) from10.0-48.4%. In addition, 48 QTL were identified in separate environments. The LOD values ranged from 2.55-8.68 and explained 6.6-43.7% of phenotype variation. The loci were located on 19 linkage groups. The most important QTL for pasting temperature (PT) (qPT.1LG1) from mean trait values showed largest effect with highest LOD value (13.01) and PVE (48.4%). The QTL co-localised with PT and pasting time (PTi) loci that were identified in separate environments. Candidate genes were identified within the QTL peak regions. However, the major genes of interest, encoding the family of glycosyl or glucosyl transferases and hydrolases, were located at the periphery of QTL peaks. The loci identified could be effectively applied in breeding programmes to improve cassava starch quality. Alleles of candidate genes should be further studied in order to better understand their effects on starch quality traits.

  15. Production of Starch Based Bioplastic from Cassava Peel Reinforced with Microcrystalline Celllulose Avicel PH101 Using Sorbitol as Plasticizer

    Science.gov (United States)

    Maulida; Siagian, M.; Tarigan, P.

    2016-04-01

    The production of starch based bioplastics from cassava peel reeinforced with microcrystalline cellulose using sorbitol as plasticizer were investigated. Physical properties of bioplastics were determined by density, water uptake, tensile strength and Fourier Transform Infrared Spectroscopy. Bioplastics were prepared from cassava peel starch plasticized using sorbitol with variation of 20; 25; 30% (wt/v of sorbitol to starch) reinforced with microcrystalline celllulose (MCC) Avicel PH101 fillers with range of 0 to 6% (wt/wt of MCC to starch). The results showed improvement in tensile strength with higher MCC content up to 9, 12 mpa compared to non-reinforced bioplastics. This could be mainly attributed to the strong hydrogen bonds between MCC and starch. On the contrary, the addition of MCC decreased the elongation at break, density and water uptake. Fourier Transform Infrared Spectroscopy showed the functional groups of bioplastics, which the majority of O-H groups were found at the bioplastics with reinforcing filler MCC that represented substantial hydrogen bonds. The highest tensile strength value was obtained for bioplastic with MCC content 6% and sorbitol content 20%. With good adhesion between MCC and starch the production of bioplastics could be widely used as a substitute for conventional plastics with more benefits to the environment.

  16. Effect of genotype and genotype by environment interaction on total cyanide content, fresh root, and starch yield in farmer-preferred cassava landraces in Tanzania.

    Science.gov (United States)

    Mtunguja, Mariam K; Laswai, Henry S; Kanju, Edward; Ndunguru, Joseph; Muzanila, Yasinta C

    2016-11-01

    High starch yield is the most important trait for commercialized cassava starch production. Furthermore, cyanide present in cassava roots poses a health challenge in the use of cassava for food. Cassava genotypes have varying maturity periods that are also environmental dependent. This study aimed at identifying suitable cultivars and optimum time of harvest to maximize starch production across three environments. The study found significant difference between genotypes, locations, harvest period, and all the interactions (P ≤ 0.001) for all traits analyzed. Kiroba recorded high starch yields of 17.4, 12.7, and 8.2 t ha(-1) at Chambezi, Amani, and Magadu, respectively. Kilusungu recorded highest cyanide content of 300-400 ppm across all locations but Kiroba recorded highest values of 800 ppm, 15 months after planting at Chambezi. Genotype by environment (GGE) biplot analysis revealed that Kiroba was a superior cultivar in terms of starch yield. Kilusungu recorded highest cyanide content and average starch yield, therefore suitable for use in starch production. The study confirmed effect of genotype and genotype by environment interaction, Kiroba cultivar was superior in terms of starch yield and maximum starch yield was obtained at 9 months after planting. Nyamkagile and Kibandameno had the lowest cyanide content across all environments.

  17. Low Density Wood-Based Particleboards Bonded with Foamable Sour Cassava Starch: Preliminary Studies

    Directory of Open Access Journals (Sweden)

    Sandra Monteiro

    2016-10-01

    Full Text Available This work investigates the feasibility of producing low density particleboards using an adhesive system based on sour cassava starch, taking advantage of its adhesive and self-expansion properties. Relevant properties of the produced particleboards were evaluated according to European Standards including: density, internal bond, moisture content and thickness swelling. Low density particleboards were produced with densities between 207 kg/m3 and 407 kg/m3. The best performance corresponded to particleboard with a density of 318 kg/m3, an internal bond strength of 0.67 N/mm2, and a thickness swelling of 8.7%. These values meet the standard requirements of general purpose lightweight boards for use in dry conditions. Heat post-treatment (24 h at 80 °C led to lower internal bond strength, due to retrogradation (recrystallization of amylose and amylopectin chains upon cooling causing higher rigidity of the starch binder. However, it showed to have a significant effect on decreasing the thickness swelling.

  18. A Study of Specific Heat Capacity Functions of Polyvinyl Alcohol- Cassava Starch Blends

    Science.gov (United States)

    Sin, Lee Tin; Rahman, W. A. W. A.; Rahmat, A. R.; Morad, N. A.; Salleh, M. S. N.

    2010-03-01

    The specific heat capacity ( C sp) of polyvinyl alcohol (PVOH) blends with cassava starch (CSS) was studied by the differential scanning calorimetry method. Specimens of PVOH-CSS blends: PPV37 (70 mass% CSS) and PPV46 (60 mass% CSS) were prepared by a melt blending method with glycerol added as a plasticizer. The results showed that the specific heat capacity of PPV37 and PPV46 at temperatures from 330 K to 530 K increased from (2.963 to 14.995) J· g-1 · K-1 and (2.517 to 14.727) J · g-1· K-1, respectively. The specific heat capacity of PVOH-CSS depends on the amount of starch. The specific heat capacity of the specimens can be approximated by polynomial equations with a curve fitting regression > 0.992. For instance, the specific heat capacity (in J · g-1 · K-1) of PPV37 can be expressed by C sp = -17.824 + 0.063 T and PPV46 by C sp = -18.047 + 0.061 T, where T is the temperature (in K).

  19. The thermal, rheological and structural properties of cassava starch granules modified with hydrochloric acid at different temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Beninca, Cleoci; Colman, Tiago Andre Denck [State University of Ponta Grossa - UEPG, Av. Carlos Cavalcanti, 4748, ZIP 84030-900, Ponta Grossa, PR (Brazil); Lacerda, Luiz Gustavo; Filho, Marco Aurelio Silva Carvalho [Positivo University, Curitiba, PR (Brazil); Bannach, Gilbert [Paulista State University - UNESP, Bauru, SP (Brazil); Schnitzler, Egon, E-mail: egons@uepg.br [State University of Ponta Grossa - UEPG, Av. Carlos Cavalcanti, 4748, ZIP 84030-900, Ponta Grossa, PR (Brazil)

    2013-01-20

    Highlights: Black-Right-Pointing-Pointer Untreated cassava starch was modified with standard hydrochloric acid at 20 and 50 Degree-Sign C by 8 h. Black-Right-Pointing-Pointer DSC curves allowed to verify increase in the gelatinization enthalpy in agreement with high temperature. Black-Right-Pointing-Pointer Pasting properties of the studied starches were inversely proportional to the acid treatment and increased temperature. Black-Right-Pointing-Pointer The morphology of granules as well as average size and average roughness were calculated by NC-AFM. - Abstract: Starch is arguably one of the most actively investigated biopolymer in the world. In this study, the native (untreated) cassava starch granules (Manihot esculenta, Crantz) were hydrolyzed by standard hydrochloric acid solution at different temperatures (30 Degree-Sign C and 50 Degree-Sign C) and the hydrolytic transformations were investigated by the following techniques: simultaneous thermogravimetry-differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), as well as non-contact atomic force microscopy (NC-AFM), X-ray diffraction (XRD) powder patterns, and rapid viscoamylographic analysis (RVA). After the treatment with hydrochloric acid at different temperatures, the thermal stability, a gradual loss of pasting properties (viscosity), alterations in the gelatinization enthalpy ({Delta}H{sub gel}), were observed. The use of NC-AFM and XRD allowed the observation of the surface morphology and topography of the starch granules and changes in crystallinity of the granules, respectively.

  20. Swelling properties of cassava starch grafted with poly (potassium acrylate-co-acrylamide) superabsorbent hydrogel prepared by ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Barleany, Dhena Ria, E-mail: dbarleany@yahoo.com; Ulfiyani, Fida; Istiqomah, Shafina; Rahmayetty [Department of Chemical Engineering, University of Sultan Ageng Tirtayasa, Cilegon, Banten (Indonesia); Heriyanto, Heri; Erizal [Centre for Application of Isotopes and Radiation, Jakarta (Indonesia)

    2015-12-29

    Natural and synthetic hydrophylic polymers can be phisically or chemically cross-linked in order to produce hydrogels. Starch based hydrogels grafted with copolymers from acrylic acid or acrylamide have become very popular for water absorbent application. Superabsorbent hydrogels made from Cassava starch grafted with poly (potassium acrylate-co-acrylamide) were prepared by using of ϒ-irradiation method. Various important parameters such as irradiation doses, monomer to Cassava starch ratio and acrylamide content were investigated. The addition of 7,5 % w w{sup −1} acrylamide into the reaction mixture generated a starch graft copolymer with a water absorption in distilled water as high as 460 g g{sup −1} of its dried weight. The effectivity of hydrogel as superabsorbent for aqueous solutions of NaCl and urea was evaluated. The obtained hydrogel showed the maximum absorptions of 317 g g{sup −1} and 523 g g{sup −1} for NaCl and urea solution, respectively (relative to its own dry weight). The structure of the graft copolymer was analyzed by using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM)

  1. Swelling properties of cassava starch grafted with poly (potassium acrylate-co-acrylamide) superabsorbent hydrogel prepared by ionizing radiation

    Science.gov (United States)

    Barleany, Dhena Ria; Ulfiyani, Fida; Istiqomah, Shafina; Heriyanto, Heri; Rahmayetty, Erizal

    2015-12-01

    Natural and synthetic hydrophylic polymers can be phisically or chemically cross-linked in order to produce hydrogels. Starch based hydrogels grafted with copolymers from acrylic acid or acrylamide have become very popular for water absorbent application. Superabsorbent hydrogels made from Cassava starch grafted with poly (potassium acrylate-co-acrylamide) were prepared by using of ϒ-irradiation method. Various important parameters such as irradiation doses, monomer to Cassava starch ratio and acrylamide content were investigated. The addition of 7,5 % w w-1 acrylamide into the reaction mixture generated a starch graft copolymer with a water absorption in distilled water as high as 460 g g-1 of its dried weight. The effectivity of hydrogel as superabsorbent for aqueous solutions of NaCl and urea was evaluated. The obtained hydrogel showed the maximum absorptions of 317 g g-1 and 523 g g-1 for NaCl and urea solution, respectively (relative to its own dry weight). The structure of the graft copolymer was analyzed by using Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM).

  2. Effects of Ultrasound on Crystallization of Cassava Starch%超声波作用对木薯淀粉颗粒结晶的影响

    Institute of Scientific and Technical Information of China (English)

    蓝丽红; 李冬雪; 陈阿明; 封余贤; 蓝平; 廖安平

    2012-01-01

    [目的]为了研究超声波作用对木薯淀粉结结晶结构的影响.[方法]用偏光显微镜对超声波作用后的木薯淀粉进行表征.[结果]超声波处理木薯淀粉的最佳条件为:以浓度5%硫酸钠溶液为溶剂,木薯淀粉悬浮液中淀粉含量为16.7%,功率为400W,作用时间300s.经超声作用的木薯淀粉颗粒的偏光十字特征减弱或消失,木薯淀粉颗粒的结晶结构减弱或消失.[结论]超声作用破坏了淀粉的结晶结构,颗粒表面与反应试剂的接触面积增多,从而提高了反应活性.%[Objective] The research aimed to study the effects of ultrasound on the particle shape of cassava starch. [ Method ] Polarizing microscope was used to study cassava starch treated by ultrasound. [Result] The optimum ultrasonic treatment of cassava starch was as follows: 5% sodium sulfate as solvent, content of cassava starch 16.7% , ultrasonic power 400 W and lmdation time 300 s. The cross-polarized state of cassava starch granules showed weakening or disappearance and cassava starch granules crystal structure reduced or lost. [ Conclusion] Ultrasonic ir-ridation destroyed the crystalline structure of starch, and increased its contact area of particle surface and reactivity.

  3. Effect of resistant starch on the cooking quality of yam (Dioscorea spp.) and cassava (Manihot esculenta) based paste products.

    Science.gov (United States)

    Kouadio, Olivier Kouadio; N'dri, Denis Yao; Nindjin, Charlemagne; Marti, Alessandra; Casiraghi, Maria Cristina; Faoro, Franco; Erba, Daniela; Bonfoh, Bassirou; Amani, N'guessan Georges

    2013-06-01

    Total starch (TS) and resistant starch (RS) contents in pasty edible product of mealy and hard cooking tubers of three yam varieties and four cassava varieties were determined to evaluate their contribution in their cooking quality. TS and RS contents appeared as the main components in determining yam cooking quality. Mealy cooking yam varieties were characterized by a significant higher TS content (75.2 ± 7.7 g/100 g d.m.) and lower RS content (13.8 ± 3.4 g/100 g d.m.) than hard cooking yam varieties, which, in contrast, contained less TS (61.7 ± 12.1 g/100 g d.m.) and particularly high RS (21.8 ± 9.9 g/100 g d.m.), possibly as a consequence of the prevalence of large granules (35-40 μm) observed by light microscope. Conversely, TS and RS contents appeared not determinant on the cooking quality of cassava. Moreover, higher amylose contents were associated with substantially elevated percentages of RS in yam and cassava, and high RS content in samples modulates their pasting properties by reducing the peak viscosity and the breakdown and requiring higher temperature and longer time to the peak.

  4. Measurement of the transmittance of edible films of aloe vera (barbadensis miller) and cassava starch using optical fibers trifurcated

    Science.gov (United States)

    Díaz, L.; Reales, J.; Torres, C.

    2017-01-01

    In Colombia, especially in the Atlantic Coast it is produced and marketed the costeño cheese, an indigenous product of the gastronomy of this region, but the prolonged exposure of this product to the environment leads to microbial contamination and non-enzymatic rancidity. For this reason the transmittance of an edible coating based in aloe vera gel and cassava starch to preserve costeño cheese was evaluated using trifurcated optical fibers. The results become a tool for the selection of treatments in making edible films and their subsequent use in coatings for various types of food products.

  5. Acidification and starch behaviour during co-fermentation of cassava (Manihot esculenta Crantz) and soybean (Glycine max Merr) into gari, an African fermented food.

    Science.gov (United States)

    Afoakwa, Emmanuel Ohene; Kongor, Edem John; Annor, George Amponsah; Adjonu, Randy

    2010-08-01

    Changes in acidification and starch behaviour were investigated during co-fermentation of cassava and soybean into gari, an African fermented product. Non-volatile acidity, pH and starch content were evaluated using standard analytical methods. Starch breakdown and pasting characteristics were also analysed using a Brabender viscoamylograph. Fermentation caused significant variations in the pH, non-volatile acidity and starch concentration. The pH decreased with concomitant increases in non-volatile acidity during co-fermentation of the cassava dough. Soy fortification up to 20% caused only minimal effects on the pH, titratable acidity and starch content during the fermentation period. Starch content decreased from 69.8% to 60.4% within the 48 h fermentation time in the unfortified sample, with similar trends noted at all levels of fortification. Starch pasting characteristics showed varied trends in pasting temperature, peak viscosity, viscosity at 95 degrees C and at 50 degrees C-hold with increasing fermentation time and soybean concentration. Cassava could be co-fermented with soybean up to 20% concentration during gari processing without significant effect on its process and product quality characteristics.

  6. 酸解木薯淀粉及其软糖性能研究%Study on properties of acid hydrolysis cassava starch and its jelly candy

    Institute of Scientific and Technical Information of China (English)

    范浩然; 熊柳; 孙庆杰

    2013-01-01

    The acid hydrolysis of cassava starches were prepared using cassava starch as material, treating starch with 6%HCl at 50℃for different durations(0 min,30 min,60 min,90 min). At the same time the acid hydrolysis of cassava starches were used to produce cassava starch jelly candy. The properties of the acid hydrolysis of cassava starch were investigated by determining the gelatinization and texture properties and assay the tensile properties and texture properties of the acid hydrolysis cassava starch jelly candy. The results showed that a significant decrease in starch viscosity and set back and an increase in hardness with increase in acid hydrolysis. The tensile properties of jelly candy with three different hydrolysis time all accord with industrial production index. The jelly candy with 60 min acid hydrolysis of cassava starch was better on hardness,adhesiveness,chewiness and resilience.%  以木薯淀粉为原料,在50℃下,用6%HCl对木薯淀粉进行不同时间(0 min、30 min、60 min、90 min)酸解改性,制备酸解木薯淀粉,并对酸解淀粉糊化特性和质构特性进行研究与分析;同时采用酸解木薯淀粉制备软糖,对制得酸解木薯淀粉软糖进行拉伸与质构分析.实验结果表明,随酸解时间增加;酸解木薯淀粉最低粘度、峰值粘度、回生值显著降低,淀粉凝胶硬度显著增加.3个不同水解时间木薯软糖拉伸率均符合工业生产指标,60 min酸解木薯淀粉制备软糖硬度适中,胶粘性、咀嚼性、回复性良好.

  7. Isolation and characterization of two soil derived yeasts for bioethanol production on Cassava starch

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Gi-Wook; Kim, Yule; Kang, Hyun-Woo [Changhae Institute of Cassava and Ethanol Research, Changhae Ethanol Co., Ltd, Palbok-Dong 829, Dukjin-Gu, Jeonju 561-203 (Korea); Um, Hyun-Ju; Kim, Mina; Kim, Yang-Hoon [Department of Microbiology, Chungbuk National University, 410 Sungbong-Ro, Heungduk-Gu, Cheongju 361-763 (Korea); Chung, Bong-Woo [Department of Bioprocess Engineering, Chonbuk National University, 664-14, 1-Ga, Duckjin-Dong, Duckjin-Gu, Jeonju 561-156 (Korea)

    2010-08-15

    Two ethanol-producing yeast strains, CHY1011 and CHFY0901 were isolated from soil in South Korea using an enrichment technique in a yeast peptone dextrose medium supplemented with 5% (w v{sup -1}) ethanol at 30 C. The phenotypic and physiological characteristics, as well as molecular phylogenetic analysis based on the D1/D2 domains of the large subunit (26S) rRNA gene and the internally transcribed spacer (ITS) 1 + 2 regions suggested that they were novel strains of Saccharomyces cerevisiae. During shaking flask cultivation, the highest ethanol productivity and theoretical yield of S. cerevisiae CHY1011 in YPD media containing 9.5% total sugars was 1.06 {+-} 0.02 g l{sup -1} h{sup -1} and 95.5 {+-} 1.2%, respectively, while those for S. cerevisiae CHFY0901 were 0.97 {+-} 0.03 g l{sup -1} h{sup -1} and 91.81 {+-} 2.2%, respectively. Simultaneous saccharification and fermentation for ethanol production was carried out using liquefied cassava (Manihot esculenta) starch in a 5 l lab-scale jar fermenter at 32 C for 66 h with an agitation speed of 2 Hz. Under these conditions, S. cerevisiae CHY1011 and CHFY0901 yielded a final ethanol concentration of 89.1 {+-} 0.87 g l{sup -1} and 83.8 {+-} 1.11 g l{sup -1}, a maximum ethanol productivity of 2.10 {+-} 0.02 g l{sup -1} h{sup -1} and 1.88 {+-} 0.01 g l{sup -1} h{sup -1}, and a theoretical yield of 93.5 {+-} 1.4% and 91.3 {+-} 1.1%, respectively. These results suggest that S. cerevisiae CHY1011 and CHFY0901 have potential use in industrial bioethanol fermentation processes. (author)

  8. Isolation and characterisation of starch biosynthesis genes from cassava (Manihot esculenta Crantz)

    NARCIS (Netherlands)

    Munyikwa, T.R.I.

    1997-01-01


    Cassava (Manihot esculenta Crantz) is a tropical crop grown for its starchy thickened roots, mainly by peasant farmers, in the tropics, for whom it is a staple food. There is an increasing demand for the use of cassava in processed food and feed products, and in the

  9. Isolation and characterisation of starch biosynthesis genes from cassava (Manihot esculenta Crantz).

    NARCIS (Netherlands)

    Munyikwa, T.R.I.

    1997-01-01

    Cassava (Manihot esculenta Crantz) is a tropical crop grown for its starchy thickened roots, mainly by peasant farmers, in the tropics, for whom it is a staple food. There is an increasing demand for the use of cassava in processed food and feed products, and in the paper and textile industries amon

  10. Biocomposite of Cassava Starch Reinforced with Cellulose Pulp Fibers Modified with Deposition of Silica (SiO2 Nanoparticles

    Directory of Open Access Journals (Sweden)

    Joabel Raabe

    2015-01-01

    Full Text Available Eucalyptus pulp cellulose fibers were modified by the sol-gel process for SiO2 superficial deposition and used as reinforcement of thermoplastic starch (TPS. Cassava starch, glycerol, and water were added at the proportion of 60/26/14, respectively. For composites, 5% and 10% (by weight of modified and unmodified pulp fibers were added before extrusion. The matrix and composites were submitted to thermal stability, tensile strength, moisture adsorption, and SEM analysis. Micrographs of the modified fibers revealed the presence of SiO2 nanoparticles on fiber surface. The addition of modified fibers improved tensile strength in 183% in relation to matrix, while moisture adsorption decreased 8.3%. Such improvements were even more effective with unmodified fibers addition. This result was mainly attributed to poor interaction between modified fibers and TPS matrix detected by SEM analysis.

  11. BIODEGRADABLE PLASTICS FROM A MIXTURE OF LOW DENSITY POLYETHYLENE (LDPE AND CASSAVA STARCH WITH THE ADDITION OF ACRYLIC ACID

    Directory of Open Access Journals (Sweden)

    Susilawati Susilawati

    2013-05-01

    Full Text Available A research of preparation biodegradable plastics, from LDPE and cassava starch mixture with the addition of acrylic acid, had been conducted. This research purpose to  studied compatibility properties of the material and percent weight loss during the biodegradation test. Optimum weight loss (59,26% was showed after 60 days witches LDPE and starch composition ratio 6 : 4 (w/w  while tensile strength  equal to 0,38 Kgf/mm2.  SEM characterization showed that biodegradation has occurred by  formation of hole in the biodegradable plastic surface. DTA test gave Tg = 130 °C, Tm = 230 °C and Td = 370-450 °C while FT-IR analysis showed that the biodegradable plastics have a chemistry interaction.

  12. Enhanced production of raw starch degrading enzyme using agro-industrial waste mixtures by thermotolerant Rhizopus microsporus for raw cassava chip saccharification in ethanol production.

    Science.gov (United States)

    Trakarnpaiboon, Srisakul; Srisuk, Nantana; Piyachomkwan, Kuakoon; Sakai, Kenji; Kitpreechavanich, Vichien

    2017-09-14

    In the present study, solid-state fermentation for the production of raw starch degrading enzyme was investigated by thermotolerant Rhizopus microsporus TISTR 3531 using a combination of agro-industrial wastes as substrates. The obtained crude enzyme was applied for hydrolysis of raw cassava starch and chips at low temperature and subjected to nonsterile ethanol production using raw cassava chips. The agro-industrial waste ratio was optimized using a simplex axial mixture design. The results showed that the substrate mixture consisting of rice bran:corncob:cassava bagasse at 8 g:10 g:2 g yielded the highest enzyme production of 201.6 U/g dry solid. The optimized condition for solid-state fermentation was found as 65% initial moisture content, 35°C, initial pH of 6.0, and 5 × 10(6) spores/mL inoculum, which gave the highest enzyme activity of 389.5 U/g dry solid. The enzyme showed high efficiency on saccharification of raw cassava starch and chips with synergistic activities of commercial α-amylase at 50°C, which promotes low-temperature bioethanol production. A high ethanol concentration of 102.2 g/L with 78% fermentation efficiency was achieved from modified simultaneous saccharification and fermentation using cofermentation of the enzymatic hydrolysate of 300 g raw cassava chips/L with cane molasses.

  13. Cassava starch coating and citric acid to preserve quality parameters of fresh-cut "Tommy Atkins" mango.

    Science.gov (United States)

    Chiumarelli, Marcela; Pereira, Leila M; Ferrari, Cristhiane C; Sarantópoulos, Claire I G L; Hubinger, Miriam D

    2010-06-01

    Combination of citric acid dipping (5 g/L) and cassava starch coating (10 g/L), with and without glycerol (10 g/L), was studied to verify the effectiveness of these treatments to inhibit enzymatic browning, to reduce respiration rate, and to preserve quality parameters of "Tommy Atkins" fresh-cut mangoes during storage at 5 degrees C. Color characteristics (L and C), mechanical properties (stress at failure), weight loss, beta-carotene content, sensory acceptance, and microbial growth of fruits were evaluated during 15 d. The respiration rate of fruit subjected to the treatments was also analyzed. Nontreated fresh-cut mango was used as a control sample. Cassava starch edible coatings and citric acid dipping promoted a decrease in respiration rate of mango slices, with values up to 41% lower than the control fruit. This treatment also promoted better preservation of texture and color characteristics of mangoes and delayed carotenoid formation and browning reactions during storage. Moreover, the treated fruit showed great sensory acceptance by consumers throughout the whole storage period. However, the use of glycerol in the coating formulation was not efficient in the maintenance of quality parameters of fresh-cut mangoes, promoting a higher weight loss of samples, impairing fruit texture characteristics, increasing carotenogenesis, and favoring microbial growth during storage.

  14. Amylase production by Saccharomycopsis fibuligera A11 in solid-state fermentation for hydrolysis of Cassava starch.

    Science.gov (United States)

    Chen, Lei; Chi, Zhen-Ming; Chi, Zhe; Li, Mei

    2010-09-01

    The optimization of process parameters for high amylase production by Saccharomycopsis fibuligera A11 in solid-state fermentation was carried out using central composite design. Finally, the optimal parameters obtained with the response surface methodology (RSM) were moisture 610.0 ml/kg, inoculum 30.0 ml (OD(600 nm) = 20.0)/kg, the amount ratio of wheat bran to rice husk 0.42, cassava starch concentration 20.0 g/kg, temperature 28 degrees C, and natural pH. Under the optimized conditions, 4,296 U/g of dry substrate of amylase activity was reached in the solid-state fermentation culture of the yeast strain A11 within 160 h, whereas the predicted maximum amylase activity of 4,222 U/g of dry substrate of amylase activity was derived from the RSM regression. It was found that cassava starch can be actively converted into monosaccharides and oligosaccharides by the crude amylase.

  15. Synthesis of an air-working trilayer artificial muscle using a conductive cassava starch biofilm (manihot esculenta, cranz) and polypyrrole (PPy)

    Science.gov (United States)

    Núñez D, Y. E.; Arrieta A, Á. A.; Segura B, J. A.; Bertel H, S. D.

    2016-02-01

    In this study, a methodology for obtaining a conductive cassava starch biofilm doped with lithium perchlorate (LiClO4) is shown, as well as the electrochemical technique for the synthesis of polypyrrole films, which are used for developing the trilayer artificial muscle PPy/Biopolymer/PPy designed to operate in air. Furthermore, results from the trilayer movement using chronoamperometric techniques are shown.

  16. 机械活化木薯淀粉的光谱分析%Spectrum Analysis of Mechanical Activated Cassava Starch

    Institute of Scientific and Technical Information of China (English)

    孙丹丹; 张宏伟

    2012-01-01

    采用机械活化的方法对木薯淀粉进行处理,利用X射线衍射、红外光谱及激光光谱等方法对处理后木薯淀粉的结晶结构、分子基团和粒径分布进行分析。研究结果表明,机械活化可以有效降低木薯淀粉颗粒的粒径,且粒径线性回归的趋势分布随活化时间不同而迁移,机械活化能破坏木薯淀粉的结晶结构,在X射线衍射图上表现为结晶衍射峰消失,机械活化可以增加木薯淀粉中反应基团游离羟基的数量,尤其使伯羟基的数量增加。%Cassava starch was processed by mechanical activation.Crystal structure,molecular group and particle size distribution of processed cassava starch were studied by X-ray diffraction,infrared spectroscopy and laser spectroscopy.The results showed that particle size of cassava starch could be reduced effectively by mechanical activation,and distribution of its linear regression trend was shifted with different activation time.Mechanical activation energy could destroy crystal structure of cassava starch,shown as disappearance of crystal diffraction peak in the X-ray diffraction diagram.And mechanical activation could increase the number of reactive free hydroxyl of cassava starch,especially primary hydroxyl.

  17. Effect of thermal and chemical modifications on the mechanical and release properties of paracetamol tablet formulations containing corn, cassava and sweet potato starches as filler-binders

    Institute of Scientific and Technical Information of China (English)

    Mariam; Vbamiunomhene; Lawal; Michael; Ayodele; Odeniyi; Oludele; Adelanwa; Itiola

    2015-01-01

    Objective: To investigate the effects of acetylation and pregelatinization of cassava and sweet potato starches on the mechanical and release properties of directly compressed paracetamol tablet formulations in comparison with official corn starch.Methods: The native starches were modified by acetylation and pregelatinization. The tablets were assessed using friability(Fr), crushing strength(Cs), disintegration time(Dt) and dissolution parameters. Results: Starch acetylation produced paracetamol tablets that were stronger and had the best balance of mechanical and disintegration properties, while pregelatinization produced tablets that were more friable but had a better overall strength in relation to disintegration than formulations made from natural starches. Correlations mainly existed between Dt and the dissolution parameters t80, t2 and k1 in the formulations. Conclusions: Modification of the experimental starches improved the mechanical and release properties of directly compressed paracetamol tablet formulations. Thus, they can be developed for use as pharmaceutical excipients in specific formulations.

  18. Effect of thermal and chemical modiifcations on the mechanical and release properties of paracetamol tablet formulations containing corn, cassava and sweet potato starches as ifller-binders

    Institute of Scientific and Technical Information of China (English)

    Mariam Vbamiunomhene Lawal; Michael Ayodele Odeniyi; Oludele Adelanwa Itiola

    2015-01-01

    Objective:To investigate the effects of acetylation and pregelatinization of cassava and sweet potato starches on the mechanical and release properties of directly compressed paracetamol tablet formulations in comparison with official corn starch. Methods: The native starches were modified by acetylation and pregelatinization. The tablets were assessed using friability (Fr), crushing strength (Cs), disintegration time (Dt) and dissolution parameters. Results: Starch acetylation produced paracetamol tablets that were stronger and had the best balance of mechanical and disintegration properties, while pregelatinization produced tablets that were more friable but had a better overall strength in relation to disintegration than formulations made from natural starches. Correlations mainly existed between Dt and the dissolution parameters t80, t2 and k1 in the formulations. Conclusions:Modification of the experimental starches improved the mechanical and release properties of directly compressed paracetamol tablet formulations. Thus, they can be developed for use as pharmaceutical excipients in specific formulations.

  19. Phylogeny and expression pattern of starch branching enzyme family genes in cassava (Manihot esculenta Crantz) under diverse environments.

    Science.gov (United States)

    Pei, Jinli; Wang, Huijun; Xia, Zhiqiang; Liu, Chen; Chen, Xin; Ma, Pingan; Lu, Cheng; Wang, Wenquan

    2015-08-01

    Starch branching enzyme (SBE) is one of the key enzymes involved in starch biosynthetic metabolism. In this study, six SBE family genes were identified from the cassava genome. Phylogenetic analysis divided the MeSBE family genes into dicot family A, B, C, and the new group. Tissue-specific analysis showed that MeSBE2.2 was strongly expressed in leaves, stems cortex, and root stele, and MeSBE3 had high expression levels in stem cortex and root stele of plants in the rapid growth stage under field condition, whereas the expression levels of MeSBE2.1, MeSBE4, and MeSBE5 were low except for in stems cortex. The transcriptional activity of MeSBE2.2 and MeSBE3 was higher compared with other members and gradually increased in the storage roots during root growth process, while the other MeSBE members normally remained low expression levels. Expression of MeSBE2.2 could be induced by salt, drought, exogenous abscisic acid, jasmonic acid, and salicylic acid signals, while MeSBE3 had positive response to drought, salt, exogenous abscisic acid, and salicylic acid in leaves but not in storage root, indicating that they might be more important in starch biosynthesis pathway under diverse environments.

  20. Research on the Physicochemical Property of the Starch in Different Cassava Varieties%不同品种的木薯淀粉理化特性研究

    Institute of Scientific and Technical Information of China (English)

    杨栋林; 陈燕珍; 庞月圆; 刘晓灿; 谭涛

    2009-01-01

    [Objective] The physical and chemical characteristics of cassava starch was studied.[Method] The cassava variety: bread cassava with large leaf and white skin(DB), bread cassava with small leaf and white skin (XB), bread cassava with large leaf and red skin(DH) being taken as experimental material, the physical and chemical property such as the content of protein, the light transmittance, the stability of frozen and condensation/precipitation, and cassava shape of these varieties was tested.[Results] The order of the content of protein from high to low was: XB>DH>DB;the light transmittance, DB>XB>DH;there was no difference in the stability of frozen and condensation/precipitation among varieties;and there was difference in the cassava shape among varieties.[Conclusion] The scientific reference for the deep processing and development and utilization of cassava was provided.%[目的]研究木薯淀粉的理化特性.[方法]以大叶白皮面包木薯(DB)、小叶白皮面包木薯(XB)、大叶红皮面包木薯(DH)为试验材料,测定其蛋白质含量、透光率、冷冻稳定性、凝沉稳定性及颗粒形态等理化特性.[结果]蛋白质含量的高低为:XB>DH>DB;透光率的大小为:DB>XB>DH;冷冻稳定性及凝沉稳定性差异不大;淀粉的颗粒形态有差异.[结论]试验为木薯的深加工及开发利用提供了科学的参考依据.

  1. Production of raw starch-degrading enzyme by Aspergillus sp. and its use in conversion of inedible wild cassava flour to bioethanol.

    Science.gov (United States)

    Moshi, Anselm P; Hosea, Ken M M; Elisante, Emrode; Mamo, Gashaw; Önnby, Linda; Nges, Ivo Achu

    2016-04-01

    The major bottlenecks in achieving competitive bioethanol fuel are the high cost of feedstock, energy and enzymes employed in pretreatment prior to fermentation. Lignocellulosic biomass has been proposed as an alternative feedstock, but because of its complexity, economic viability is yet to be realized. Therefore, research around non-conventional feedstocks and deployment of bioconversion approaches that downsize the cost of energy and enzymes is justified. In this study, a non-conventional feedstock, inedible wild cassava was used for bioethanol production. Bioconversion of raw starch from the wild cassava to bioethanol at low temperature was investigated using both a co-culture of Aspergillus sp. and Saccharomyces cerevisiae, and a monoculture of the later with enzyme preparation from the former. A newly isolated strain of Aspergillus sp. MZA-3 produced raw starch-degrading enzyme which displayed highest activity of 3.3 U/mL towards raw starch from wild cassava at 50°C, pH 5.5. A co-culture of MZA-3 and S. cerevisiae; and a monoculture of S. cerevisiae and MZA-3 enzyme (both supplemented with glucoamylase) resulted into bioethanol yield (percentage of the theoretical yield) of 91 and 95 at efficiency (percentage) of 84 and 96, respectively. Direct bioconversion of raw starch to bioethanol was achieved at 30°C through the co-culture approach. This could be attractive since it may significantly downsize energy expenses.

  2. Study on Preparation and Properties of Cross-Linking and Esterifying Starch of Mechanical Activated Cassava Starch%机械活化木薯交联酯化淀粉的制备及其性能研究

    Institute of Scientific and Technical Information of China (English)

    陈渊; 杨家添; 谢祖芳; 谭义秋; 黄祖强; 周琴

    2012-01-01

    Cross - linking and esterifying starch of mechanical activated cassava starch was prepared by using mechanical activated cassava starch as raw material, and using sodium trimetaphosophate for cross - linking agent and acetic anhydride for acetification, which its synthesis route prepared by continual reactions in one - step synthesis way. The effects of reaction temerature, cross - linking agent and esterifying agent dosage, pH value of cross — linking and esterifying and cross - linking time on the cold viscosity of cross - linking and esterifying starch paste were investigated respectively, and the physical and chemical Parameters and structure of the cross - linking and esterifying starch with mechanical activated cassava starch and cross - linking and esterifying starch with raw cassava starch were studied. The results indicated that the above reaction conditions were all found to affect the preparation of cross - linking and esterifying mechanical activated cassava starch. Under the reaction temperature 40℃ ,1.0% amounts of sodium trimetaphosphate,crosslinking pH value 10.0,crosslinking time 2. 0 h,acetic anhydride amount 0. 5 mL,esterifying pH value 9.0, esterifying time 60 min, the cold viscosity of cross - linking and esterifying starch paste of mechanical activated cassava was enhanced from 847 mPa. S of cassava starch to 3 225 mPa. S, and the stability, acidity - resistance, staling resistance of the viscosity of starch paste were significantly improved. Cross - linking and esterifying composite modified was propitious to formation of V type crystal starch.%以机械活化木薯淀粉为原料,三偏磷酸钠为交联剂,醋酸酐为酯化剂,采用一步连续法制备机械活化木薯交联酯化淀粉,考察反应温度、交联剂用量、交联pH、交联时间、酯化剂用量、酯化pH、酯化时间等因素对交联酯化淀粉糊冷黏度的影响,并与原木薯淀粉合成的交联酯化淀粉进行比较,研究了产物的理化特性

  3. Characterization of foams obtained from cassava starch, cellulose fibres and dolomitic limestone by a thermopressing process

    Directory of Open Access Journals (Sweden)

    Vivian Consuelo Reolon Schmidt

    2010-02-01

    Full Text Available Cassava starch, dolomitic limestone and eucalypt cellulose fibres were used to prepare foam trays that could be used to pack foodstuffs. The influence of the cellulose fibre concentration in the composite formulation was investigated using 5, 10, 15, 20, 30 and 40% of fibres. The results indicated that an increase in cellulose fibre concentration promoted a decrease in density and tensile strength of the foam samples. The tensile strength at break for foam trays containing 5% of cellulose fibres was 3.03MPa, whilst the commercial trays of expanded polystyrene used to pack foods in supermarkets presented a tensile strength of 1.49 MPa. The elongation at break of the foam trays obtained in this work varied slightly with increase in cellulose fibre concentration, the values being about 20% lower than the elongation at break observed for commercial foam trays of expanded polystyrene. Thus, the materials developed in this work represented a possible alternative to the use of EPS foam trays for packing dry foods. The trays' properties need to be improved for their use with moist foods.Amido de mandioca, calcário dolomítico e fibras celulósicas de eucalipto foram usados para preparar bandejas biodegradáveis que podem ser usadas como embalagens para alimentos. A influência da concentração de fibras na formulação dos compostos foi investigada, usando 5, 10, 15, 20, 30 e 40% de fibras. Os resultados indicaram que o aumento na concentração de fibras celulósicas promove uma diminuição na densidade e na resistência a tração das amostras. A tensão na ruptura para as bandejas contendo 5% de fibras celulósicas foi de 3,03 MPa, enquanto as bandejas comerciais de poliestireno expandido (EPS usadas para embalagens alimentícias em supermercados apresentaram uma tensão de 1.49 MPa. A elongação na ruptura das bandejas obtidas neste trabalho variou ligeiramente com o aumento da concentração de fibra celulósica, os valores são aproximadamente

  4. Response surface optimisation for acetone-butanol-ethanol production from cassava starch by co-culture of Clostridium butylicum and Bacillus subtilis

    Directory of Open Access Journals (Sweden)

    Benjamas Cheirsilp

    2011-11-01

    Full Text Available Acetone-butanol-ethanol (ABE production from cassava starch was enhanced by a syntrophic co-culture of Clostridium butylicum TISTR 1032 and high amylase producing Bacillus subtilis WD 161 without anaerobic pretreatment. The production of amylase and ABE using this co-culture were respectively 16 and 6 times higher than those using the pure culture of C. butylicum TISTR 1032. The effect of the medium components on the performance of the co-culture was investigated using response surface methodology (RSM. Among the investigated components, cassava starch and ammonium nitrate contributed a significant effect on the production of amylase and ABE, while yeast extract had less effect. Based on the optimum strategy using RSM, the ABE production by the co-culture was improved 2.2-fold compared with that obtained from the initial condition and with a minimum requirement of nitrogen source.

  5. Cassava starch graft copolymers an eco-friendly corrosion inhibitor for steel in H{sub 2}SO{sub 4} solution

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xianghong; Deng, Shuduan [Southwest Forestry University, Kunming (China)

    2015-11-15

    Cassava starch graft copolymer (CSGC) was prepared by grafting acryl amide (AA) onto cassava starch (CS). The inhibition effect of CSGC on the corrosion of cold rolled steel (CRS) in 1.0M H{sub 2}SO{sub 4} solution was first studied by weight loss, potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS) and scanning electron microscope (SEM) methods. The results show that CSGC is a good inhibitor, and inhibition efficiency of CSGC is higher than that of CS or AA. The adsorption of CSGC on steel surface obeys Langmuir adsorption isotherm. CSGC is a mixed-type inhibitor at 20 .deg. C, while mainly a cathodic inhibitor at 50 .deg. C.

  6. Ninety-Day Oral Toxicity Assessment of an Alternative Biopolymer for Controlled Release Drug Delivery Systems Obtained from Cassava Starch Acetate

    Directory of Open Access Journals (Sweden)

    Douglas Rossi Jesus

    2015-01-01

    Full Text Available The large consumption of biodegradable films from cassava starch acetate (FCSA as ingredients in food and pharmaceutical products requires the assessment of the possible toxicity of these products. The aim of this study was to investigate the toxicity of biodegradable film from cassava starch acetate after oral exposure of Wistar rats for 90 days. The amount of food consumed and the body weight were weekly monitored. Blood and urine samples were obtained for the assessment of serum parameters and renal function. Histopathological analyses in target organs were also performed. No evidence of clinical toxicity in hematological, biochemical, or renal parameters in the FCSA-treated animals was found. In addition, relative organ weight and histopathological evaluations did not differ between groups treated with FCSA and control. Data obtained suggest that the subchronic exposure to FCSA does not cause obvious signs of toxicity in Wistar rats, indicating possible safety of this biofilm.

  7. Ninety-Day Oral Toxicity Assessment of an Alternative Biopolymer for Controlled Release Drug Delivery Systems Obtained from Cassava Starch Acetate

    Science.gov (United States)

    Jesus, Douglas Rossi; Barbosa, Lorena Neris; Prando, Thiago Bruno Lima; Martins, Leonardo Franco; Gasparotto, Francielli; Guedes, Karla Moraes Rocha; Dragunski, Douglas Cardoso; Lourenço, Emerson Luiz Botelho; Dalsenter, Paulo Roberto; Gasparotto Junior, Arquimedes

    2015-01-01

    The large consumption of biodegradable films from cassava starch acetate (FCSA) as ingredients in food and pharmaceutical products requires the assessment of the possible toxicity of these products. The aim of this study was to investigate the toxicity of biodegradable film from cassava starch acetate after oral exposure of Wistar rats for 90 days. The amount of food consumed and the body weight were weekly monitored. Blood and urine samples were obtained for the assessment of serum parameters and renal function. Histopathological analyses in target organs were also performed. No evidence of clinical toxicity in hematological, biochemical, or renal parameters in the FCSA-treated animals was found. In addition, relative organ weight and histopathological evaluations did not differ between groups treated with FCSA and control. Data obtained suggest that the subchronic exposure to FCSA does not cause obvious signs of toxicity in Wistar rats, indicating possible safety of this biofilm. PMID:26451154

  8. Experimental Researches on Cassava Starch Wastewater Treatment by Coagulation Sedimentation%絮凝法处理木薯淀粉生产废水试验研究

    Institute of Scientific and Technical Information of China (English)

    王汉林; 刘康怀

    2013-01-01

    Cassava starch wastewater from the processing industry has brought great environmental pollutions . Some experimental researches on cassava starch wastewater treatment were done by coagulation sedimenta-tion.In the experiments three flocculants were used which were:polyferrum,polymeric aluminum and sulfra aliminium,and polyacrylamide was used as concretion -aid agant.Through the analysis of experimental da-tas,the result was obtained that the best conditions of cassava starch wastewater treatment were as follows:pH-7.5,flocculant-polymeric aluminum,concretion-aid agant-polyacrylamide.In this way the cost of cas-sava starch wastewater treatment was only 0.14 yuan per ton.%  木薯淀粉生产加工过程中所产生的生产废水给环境造成了很大的污染。对木薯淀粉生产废水进行了絮凝试验研究。试验分别采用了3种絮凝剂:聚合硫酸铁、聚合氯化铝、精制硫酸铝,助凝剂采用聚丙烯酰胺。通过对试验数据进行分析得出,处理木薯淀粉生产废水的最佳条件是:pH 值为7.5,采用聚合氯化铝作絮凝剂,聚丙烯酰胺为助凝剂,处理每吨废水需花费0.14元。

  9. Effects of Cassava Starch and Natural Rubber as Binders on the Flexural and Water Absorption Properties of Recycled Paper Pulp Based Composites

    Directory of Open Access Journals (Sweden)

    Oladele Isiaka Oluwole

    2015-10-01

    Full Text Available Responsiveness was given to the effects of cassava starch and natural rubber as binders on the flexural strength and the water absorptivity properties of the developed rattan particulate reinforced paper pulp based composites. Paper pulp was produced by chopping waste papers into smaller pieces and soaked in boiled water after which it was stirred thoroughly to form paper pulp. Rattan particulate was produced by hammering, chopping, pounding and milling of rattan canes followed by sieving into a particle size of 437 µ. Varying mass of paper from 300-400 g and particulate rattan in treated and untreated form of 2-8 g were mixed and bonded with natural rubber and cassava starch, respectively for the various samples developed. The mixtures were thoroughly mixed to produce homogenous pastes and poured into 150 x 50 x 30 mm detachable mould and compacted for 5 minutes using a laboratory compaction machine maintained at 20 KN. The developed composites were allowed to cure at room temperature for 27 days after which flexural and water absorptivity tests were carried out on the samples. It was noticed that the composite samples ST4 and S5 containing cassava starch happen to be the best in terms of flexural strength while NR2 gave the best water- repellent outcome.

  10. Water absorption, retention and the swelling characteristics of cassava starch grafted with polyacrylic acid

    NARCIS (Netherlands)

    Witono, J. R.; Noordergraaf, Inge; Heeres, H. J.; Janssen, L. P. B. M.; Heeres, Hero

    2014-01-01

    An important application of starch grafted with copolymers from unsaturated organic acids is the use as water absorbent. Although much research has been published in recent years, the kinetics of water absorption and the swelling behavior of starch based superabsorbents are relatively unexplored. Al

  11. Conversion of cassava starch to biomass, carbohydrates, and acids by Aspergillus niger.

    Science.gov (United States)

    Tan, K H; Ferguson, L B; Carlton, C

    1984-01-01

    The filamentous fungus, Aspergillus niger, efficiently converted cassava polysaccharides to mycelial mass, simple sugars, and acids during the course of its growth. A typical 70-ml culture broth containing 2% cassava polysaccharides yielded 0.38 g dry mycelial mass, 1.14 mmol reducing sugars, and 1.17 meq acids at the end of 42 h. About 70% of the initial total carbohydrate in the medium was degraded during the same period. The sugars and acids in the culture broths were analyzed by HPLC on a single Aminex HPX-87 column at 55 degrees C, using 0.013 N H2SO4 as the eluting solvent. Cassava polysaccharides were degraded to oligosaccharides, maltotriose, maltose, and glucose beyond the 20-h growth periods, with maltotriose emerging as the major simple sugar. The appearance of citric, malic, gluconic, succinic, and fumaric acids accounted mostly for the decreasing pH in the growth media. Formation of carbohydrate species in the culture broths was closely related to the biosynthesis and secretion of several carbohydrases by A. niger. The extracellular carbohydrases were separated and identified by chromatofocusing and polyacrylamide gel electrophoresis to be amyloglucosidase (EC 3.1.2.3), alpha-amylase (EC 3.2.1.1), and alpha-glucosidase (EC 3.2.1.20), respectively.

  12. 木薯采后生理性变质与淀粉特性研究%Physiological Deterioration and Starch Characteristics of Harvest Cassava Tuberous Root

    Institute of Scientific and Technical Information of China (English)

    姚庆群; 张振文

    2012-01-01

    The rapid physiological deterioration (PD) of cassava tuberous root is main constraint factor that limits the development of cassava industry. In order to know the relationship between PD and starch characteristics on cassava, there are five varieties subjected ( SC205, SC5, SC6, SC8 and SC10) on four indices, including dry matter, starch content, amylopectin content and starch clarity. The result showed that the indices of starch characteristics were decreased by PD in all subjects, and the decline of SC205 was appeared earlier than others. The correlation analysis were indicated that Positive correlation and significant positive correlation between amylopectin content and starch content, amylopectin content respectively. Thus, we can see starch clarity was affected by the PD during storage, and starch quality of cassava tuberous root was also cut down greatly.%以华南系列的SC205、SC5、SC6、SC8和SCIO五个木薯品种为材料,于采收后不同时间分析其块根生理变质程度、干物质含量、淀粉含量、支链淀粉比例和淀粉透明度等指标,探讨木薯生理变质与块根淀粉特性的关系。研究结果表明:采后生理变质对块根淀粉特性有明显影响,所有品种淀粉特性指标在采后均呈下降趋势,其中下降最快的是SC205。对各指标的相关分析表明,支链淀粉分别与淀粉含量和淀粉透明度呈显著正相关和极显著正相关。可见,生理变质可导致淀粉透明度的下降,影响淀粉的商品品质。

  13. Physical characteristics of extruded cassava starch Características físicas de amido de mandioca extrusado

    Directory of Open Access Journals (Sweden)

    Magali Leonel

    2009-08-01

    Full Text Available Considering the importance of cassava starch for Brazilian industries, the current work aimed at evaluating the effects of extrusion parameters on the physical characteristics, mainly viscosity properties of extruded cassava starch. A factorial central composite design (2³ with three independent variables and the response surface methodology were used to evaluate the results of expansion index, specific volume, water absorption index, water solubility index, color and paste properties, according to the variations in the moisture content, barrel temperature and screw speed. Results indicated that barrel temperature influenced the expansion index, specific volume, water absorption index, all the color parameters, the initial viscosity, peak and final viscosity. Feed moisture influenced the specific volume, color parameters, final viscosity and retrogradation. The screw speed had effects on water absorption index, color components as well as on the final viscosity and retrogradation of extruded starch. High moisture, low screw speed and intermediate temperature provided lower starch degradation, which is desirable for pre-cooked starch.Considerando a importância do amido de mandioca para as indústrias brasileiras, este trabalho teve por objetivo avaliar os efeitos de parâmetros de extrusão sobre as características físicas e propriedades de pasta do amido de mandioca extrusado. Foi utilizado o delineamento fatorial do tipo central composto rotacional com três variáveis independentes (2³ e a metodologia de superfície de resposta para avaliar os resultados de índice de expansão, volume específico, índice de absorção de água, índice de solubilidade em água, cor e propriedades de pasta, de acordo com as variações de umidade, temperatura de extrusão e rotação da rosca. A temperatura de extrusão influenciou o índice de expansão, volume específico, índice de absorção de água, todos os parâmetros de cor e a viscosidade

  14. Production and characterization of thermoplastic cassava starch, functionalized poly(lactic acid), and their reactive compatibilized blends

    Science.gov (United States)

    Detyothin, Sukeewan

    Cassava starch was blended with glycerol using a co-rotating twin-screw extruder (TSE). Thermoplastic cassava starch (TPCS) at a ratio of 70/30 by weight of cassava/glycerol was selected and further blended with other polymers. TPCS sheets made from compression molding had low tensile strength (0.45 +/- 0.05 MPa) and Young's modulus (1.24 +/- 0.58 MPa), but moderate elongation at break (83.0 +/- 0.18.6%), medium level of oxygen permeability, and high water vapor permeability with a very high rate of water absorption. TPCS was blended with poly(lactic acid) (PLA) at various ratios by using a TSE. The blend resins exhibited good properties such as increased thermal stability (Tmax) and crystallinity of PLA, and improved water sensitivity and processability of TPCS. PLA and TPCS exhibited a high interfacial tension between the two phases of 7.9 mJ·m -2, indicating the formation of an incompatible, immiscible blend. SEM micrographs showed a non-homogeneous distribution of TPCS droplets in the PLA continuous phase. TEM micrographs of the blend films made by cast-film extrusion showed coalescence of the TPCS droplets in the PLA continuous phase of the blend, indicating that the compatibility between the polymer pair needs to be improved. A response surface methodology (RSM) design was used to analyze the effects of maleic anhydride (MA) and 2,5-bis(tert-butylperoxy)-2,5-dimethylhexane (Luperox or L101) contents, and TSE screw speed on the degree of grafted MA and number average molecular weight (Mn) of functionalized PLA (PLA-g-MA), a reactive compatibilizer. PLA-g- MA made by reactive extrusion had an array of colors depending on the content of L101 and MA used. New FTIR peaks suggested that MA was grafted onto the PLA backbone and oligomeric MA may occur. Increasing L101 increased the degree of grafting and decreased Mn, but the Mn of the PLA-g-MA's produced with a high amount of L101 was stable during storage. MA exhibited an optimum concentration for maximizing the

  15. 水解酶法回收木薯黄浆废水中的淀粉%Study on recovery of starch from cassava starch wastewater using aqueous enzymatic method

    Institute of Scientific and Technical Information of China (English)

    崔雯; 莫创荣; 李小明; 安鸿雪; 孙文博; 刘侃; 邓国龙

    2013-01-01

    以胰蛋白酶作为水解酶,采用水酶法从木薯黄浆废水中回收淀粉.通过调节酶加量、温度、时间、pH等因素,得到木薯淀粉的最佳回收条件:加酶量0.05 g/L,酶解时间3h,酶解温度35℃,酶解pH值为8.5.在最佳条件下得到沉淀物质量为10.85 g/L,沉淀物中淀粉含量为80.4 g/100 g,粗淀粉质量为8.72 g/L.%The aqueous enzymatic method was used to recovery of starch from cassava starch wastewater by using trypsin as hydrolase.The factors based on the enzyme dosage,temperature,time and pH.The best recovery conditions of cassava starch were as follows:the amount of enzyme 0.05 g/L,hydrolysis time 3 h,enzymolysis temperature 35 ℃,enzyme solution pH value 8.5.Under the optimum conditions obtained sediment quality of 10.85 g/L,starch content of sediment was 80.4 g/100 g,crude starch quality of 8.72 g/L.

  16. Detection of unexpected frauds: Screening and quantification of maleic acid in cassava starch by Fourier transform near-infrared spectroscopy.

    Science.gov (United States)

    Fu, Hai-Yan; Li, He-Dong; Xu, Lu; Yin, Qiao-Bo; Yang, Tian-Ming; Ni, Chuang; Cai, Chen-Bo; Yang, Ji; She, Yuan-Bin

    2017-07-15

    Fourier transform near-infrared (FT-NIR) spectroscopy and chemometrics were adopted for the rapid analysis of a toxic additive, maleic acid (MA), which has emerged as a new extraneous adulterant in cassava starch (CS). After developing an untargeted screening method for MA detection in CS using one-class partial least squares (OCPLS), multivariate calibration models were subsequently developed using least squares support vector machine (LS-SVM) to quantitatively analyze MA. As a result, the OCPLS model using the second-order derivative (D2) spectra detected 0.6%(w/w) adulterated MA in CS, with a sensitivity of 0.954 and specificity of 0.956. The root mean squared error of prediction (RMSEP) was 0.192(w/w, %) by using the standard normal variate (SNV) transformation LS-SVM. In conclusion, the potential of FT-NIR spectroscopy and chemometrics was demonstrated for application in rapid screening and quantitative analysis of MA in CS, which also implies that they have other promising applications for untargeted analysis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. MODELING OF THE SEPARATION OF PARTICLES NOT RETAINED IN THE STAGE OF SEDIMENTATION ON CHANELS: EXTRACTION PROCESS CASSAVA STARCH

    Directory of Open Access Journals (Sweden)

    Patricia Torres Lozada

    2014-12-01

    Full Text Available On the settling stage in channels of the extraction process of the cassava starch, is generated around 80% of the total wastewater from the process. On this study, we analyze the theoretical modeling of the particles that are not retained in the channels basing on the analyses of settling of discrete particles with sizes between 2 and 8 microns, using the Stockes Law. The theoretical modeling showed that the sedimentation rate is between 0,007 and 0,112 cm/min. With this rate range and a critical flow rate of 1,5 L/s, for the total removal of the particles, it is required a structure with a surface area of 1288 m2 , height of 1 m and approximately 10 days. This study shows that is not economically or technically feasible the conventional nor high settling to retain this type of particles, being advisable to evaluate different mechanisms to improve the separation efficiency of particles that may potentiate their use and to avoid the contamination of the receiving bodies of these effluents

  18. Synthesis, characterization and in vitro drug release of cisplatin loaded Cassava starch acetate–PEG/gelatin nanocomposites

    Directory of Open Access Journals (Sweden)

    V. Raj

    2016-10-01

    Full Text Available The aim of the present study is to examine the feasibility of Cassava starch acetate (CSA–polyethylene glycol (PEG–gelatin (G nanocomposites as controlled drug delivery systems. It is one of the novel drug vehicles which can be used for the controlled release of an anticancer drug. Simple nano precipitation method was used to prepare the carriers CSA–PEG–G nanocomposites and they were used for entrapping cisplatin (CDDP. Through FT-IR spectroscopy, the linking among various components of the system was proved and with the help of scanning electron microscope and transmission electron microscopy (TEM, the surface morphology was investigated. The particle sizes of the CSA–CDDP, CSA–CDDP–PEG and CSA–CDDP–PEG–G polymer composites were between 140 and 350 nm, as determined by a Zetasizer. Drug encapsulation efficiency, drug loading capacity and in vitro release of CDDP were evaluated respectively. The findings revealed that the cross linked CSA–PEG–G nanocomposites can be a potential polymeric carrier for controlled delivery of CDDP.

  19. Physical and mechanical properties of LDPE incorporated with different starch sources

    Science.gov (United States)

    Kormin, Shaharuddin; Kormin, Faridah; Dalour Hossen Beg, Mohammad; Bijarimi Mat Piah, Mohd

    2017-08-01

    In this study it was investigated the incorporation of different starches, such as sago starch, corn starch, potato starch, tapioca starch and wheat starch, in low-density polyethylene matrix (LDPE) to enhanced mechanical properties and to obtain partially biodegradable product with the aim to reduce the plastics wastes in the environment. For comparison, virgin LDPE, LDPE with different sources of starch blends were prepared and characterized under the same conditions. The starches were mixed to the LDPE using a twin screw extruder to guarantee the homogeneity of the formulations. The compound were shaping processed by injection moulding. The characterization of those compounds was done by physical (density, MFI), mechanical (Universal tensile machine). The addition of starch to LDPE reduced the MFI values, the tensile strength, elongation at break and impact strength, whereas the elastic modulus, flexural modulus and flexural strength increased. LDPE/SS show the good mechanical behavior compared to other formulation. The physical and mechanical properties were evident when 5 and 30 wt% were added. Water uptake increased with increased starch content and immersion time. The time taken for the composites to equilibrate was about one month even when they were immersed completely in water.

  20. Caracterização de amidos de mandioca nativos e modificados e utilização em produtos panificados Characterization of native and modified cassava starches and their use in baked products

    Directory of Open Access Journals (Sweden)

    Krischina Singer Aplevicz

    2007-09-01

    Full Text Available O amido de mandioca é utilizado como ingrediente principal na fabricação de biscoitos e pão de queijo. O polvilho azedo é um produto artesanal, sem padrão de qualidade estabelecido, com problemas de higiene em seu processamento e de oferta. O trabalho teve como objetivo caracterizar amidos de mandioca nativos e modificados e testá-los na elaboração de pão de queijo e biscoito de polvilho. As principais características que diferem o polvilho azedo do amido de mandioca nativo, também denominado polvilho doce são: acidez, grau de expansão, viscosidade, claridade de pasta, sinérese e poder redutor. Foram aplicados nos produtos panificados quatro tipos de amidos, sendo polvilho doce, azedo, amido modificado com peróxido de hidrogênio e amido modificado comercial Expandex® 160003. Obtidos os produtos panificados, foi determinada a composição físico-química e observado que os tipos de amidos influenciaram nas características internas, externas e no sabor. Os produtos panificados foram submetidos à análise sensorial de aceitabilidade, utilizando-se a escala hedônica de nove pontos, com provadores não-treinados. As amostras de pão de queijo contendo amido modificado oxidado com peróxido de hidrogênio foram as que apresentaram o melhor resultado entre as formulações. Para as amostras de biscoito de polvilho, as elaboradas com polvilho azedo e com Expandex® 160003 foram superiores e não diferiram estatisticamente.Cassava starch is used as the main ingredient in the production of biscuits and Brazilian cheese bread. The processing and sale of sour cassava starch - an artisanal product with no established standard of quality - is marked by hygiene problems and its commercial availability is uncertain. The purpose of this study was to characterize native and modified cassava starches and test them in cheese bread and cassava starch biscuit recipes. The main characteristics that differentiate sour starch from native cassava

  1. 湿热处理对木薯淀粉结构和性质的影响%Effect of heat-moisture treatment on structure and properties of cassava starch

    Institute of Scientific and Technical Information of China (English)

    汪树生; 杨秋实; 苏玉春; 陈光

    2013-01-01

    对木薯淀粉进行湿热处理,研究了不同初始含水量对木薯淀粉结构和性质的影响.实验结果表明:经湿热处理后的木薯淀粉颗粒表面出现凹坑,随着初始含水量增加,淀粉颗粒表面凹坑的数量增加,同时黏结现象变得严重;湿热处理木薯淀粉的糊化温度随着初始含水量的增加而升高;经湿热处理后,木薯淀粉对酸和酶的敏感性增加,更容易被酸和酶水解.%Cassava starch was heat-moisture treated and the effects of initial moisture on the structure and properties of heat-moisture treated cassava starch were studied. The results indicated that there were dents on the surface of starch granule, the number of dents increased alone with the ascent of initial moisture of heat-moisture treated cassava starch, while the bonding of starch granule became serious. The gelatinization temperature of heat-moisture treated cassava starch increased with the higher of initial moisture. The cassava starch became sensitive to acid or enzyme hydrolysis after heat-moisture treatment, easier to be hydrolyzed by acid or enzyme.

  2. Effect of cassava starch coating on quality and shelf life of fresh-cut pineapple (Ananas comosus L. Merril cv "Pérola").

    Science.gov (United States)

    Bierhals, Vânia S; Chiumarelli, Marcela; Hubinger, Miriam D

    2011-01-01

    This research studied the influence of treatment with ascorbic acid, citric acid, and calcium lactate dipping and cassava starch edible coatings on quality parameters and shelf life of fresh-cut pineapple in slices during 12 d at 5 °C. After previous tests, the treatments selected for this study were samples dipped into antibrowning solution with 0.5% of ascorbic acid and 1% of citric acid, with and without 2% of calcium lactate and coated with 2% of cassava starch suspensions. Changes in weight loss, juice leakage, mechanical properties (stress at failure), color parameters (L* and H*), ascorbic acid content, sensory acceptance, and microbial growth of fruits were evaluated. Samples only treated with antibrowning agents were used as control. Edible coatings with and without calcium lactate were efficient in reducing weight loss, juice leakage, and maintaining firmness during storage. However, these samples showed more browning and the ascorbic acid content was reduced. All treatments presented good sensory acceptance (scores above 6). The determining factor of shelf life of pineapple slices was the microbial spoilage. A shelf life of 8 d was obtained for pineapple slices only treated with antibrowning agents. On the other hand, coated samples showed a reduced shelf life of 7 d and higher yeast and mold growth. Thus, although cassava starch coatings were efficient in reducing respiration rate, weight loss, and juice leakage and maintained mechanical properties, these treatments were not able to increase the shelf life of minimally processed pineapple. Practical Application: Pineapple fruit is highly appreciated for its aroma, flavor, and juiciness, but its immediate consumption is difficult. Therefore, pineapple is a potential fruit for minimal processing. However, shelf life of fresh-cut pineapple is very limited by changes in color, texture, appearance, off-flavors, and microbial growth. The use of edible coatings as gas and water vapor barrier and antibrowning

  3. Bi-Functional Biobased Packing of the Cassava Starch, Glycerol, Licuri Nanocellulose and Red Propolis

    OpenAIRE

    Samantha Serra Costa; Janice Izabel Druzian; Bruna Aparecida Souza Machado; Carolina de Oliveira Souza; Alaíse Gil Guimarães

    2014-01-01

    The aim of this study was to characterize and determine the bi-functional efficacy of active packaging films produced with starch (4%) and glycerol (1.0%), reinforced with cellulose nanocrystals (0-1%) and activated with alcoholic extracts of red propolis (0.4 to 1.0%). The cellulose nanocrystals used in this study were extracted from licuri leaves. The films were characterized using moisture, water-activity analyses and water vapor-permeability tests and were tested regarding their total phe...

  4. Solid Substrate Fermentation of Cassava Peel for Poultry Feed Ingredient

    OpenAIRE

    Stephanie; Purwadaria T

    2013-01-01

    Cassava peel which is not used during cassava starch extraction is one of potential resources for animal feed. However, cassava peel has low level protein content, high level crude fiber, and high level of toxic cyanogenic compound. These problems limit the utilization of cassava peel as feed. Solid substrate fermentation using mold may be a solution process to increase its nutritional value and decrease toxic level of cassava peel. In this paper, matters that related with cassava peel fermen...

  5. Qualidade física e sensorial de biscoitos doces com fécula de mandioca Physical and sensorial quality of sweet cookies with cassava starch

    Directory of Open Access Journals (Sweden)

    Jucyanne Carvalho Vieira

    2010-12-01

    Full Text Available Neste trabalho, foi avaliada a substituição de 5, 10 e 15% de farinha de trigo por fécula de mandioca na elaboração de biscoito doce. Ambas, farinha e fécula, foram submetidas à caracterização físico-química, reológica e análise térmica diferencial (DTA. Os biscoitos produzidos foram comparados por meio de análises sensoriais e microbiológicas. O resultado da análise térmica diferencial não mostrou qualquer alteração no comportamento de gelatinização do amido. O teste de aceitação sensorial mostrou que a crocância foi o único atributo que apresentou diferença significativa, indicando a viabilidade técnica de substituição da farinha de trigo por 15% de fécula de mandioca.This research evaluated the substitution of 5, 10 and 15% of wheat flour for cassava starch in sweet cookies production. Both, flour and starch were submitted to the physicochemical, rheological and differential thermal analysis (DTA. The produced cookies were compared through sensory and microbiological analyses. The DTA result didn´t show any alteration in the starch gelatinization behavior. The result of the sensory acceptance analysis showed that crispness is the unique attribute that presented significant difference, indicating the technical viability of wheat flour substitution for 15% of cassava starch.

  6. Effects of crosslinking temperature and time on microstructure and stability of cassava starch microspheres.

    Science.gov (United States)

    Puncha-Arnon, Santhanee; Jiranuntakul, Wittawat; Uttapap, Dudsadee

    2015-12-10

    Starch microspheres (SMs) were prepared by a water-in-water emulsion-crosslinking technique at 4 °C and 30 °C for 1, 6, 12 and 24h; the SMs obtained were analyzed for crosslinking density, morphology, crystalline structure, and stability against temperature, pH, and α-amylase hydrolysis. The crosslinking degree at 30 °C was considerably higher than that at 4 °C. SMs prepared at 4 °C for less than 12h incubation had larger size and more porous structure as compared with those prepared at 30 °C, but the morphology became comparable (spherical shape with smooth surface and dense structure) after 24h incubation. All SMs samples displayed amorphous structure. Stability tests revealed that the SMs were very stable under acidic and mild basic pH; however, stability against α-amylase hydrolysis varied depending on incubation temperature and time.

  7. Bi-functional biobased packing of the cassava starch, glycerol, licuri nanocellulose and red propolis.

    Science.gov (United States)

    Costa, Samantha Serra; Druzian, Janice Izabel; Machado, Bruna Aparecida Souza; de Souza, Carolina Oliveira; Guimarães, Alaíse Gil

    2014-01-01

    The aim of this study was to characterize and determine the bi-functional efficacy of active packaging films produced with starch (4%) and glycerol (1.0%), reinforced with cellulose nanocrystals (0-1%) and activated with alcoholic extracts of red propolis (0.4 to 1.0%). The cellulose nanocrystals used in this study were extracted from licuri leaves. The films were characterized using moisture, water-activity analyses and water vapor-permeability tests and were tested regarding their total phenolic compounds and mechanical properties. The antimicrobial and antioxidant efficacy of the films were evaluated by monitoring the use of the active films for packaging cheese curds and butter, respectively. The cellulose nanocrystals increased the mechanical strength of the films and reduced the water permeability and water activity. The active film had an antimicrobial effect on coagulase-positive staphylococci in cheese curds and reduced the oxidation of butter during storage.

  8. Bi-functional biobased packing of the cassava starch, glycerol, licuri nanocellulose and red propolis.

    Directory of Open Access Journals (Sweden)

    Samantha Serra Costa

    Full Text Available The aim of this study was to characterize and determine the bi-functional efficacy of active packaging films produced with starch (4% and glycerol (1.0%, reinforced with cellulose nanocrystals (0-1% and activated with alcoholic extracts of red propolis (0.4 to 1.0%. The cellulose nanocrystals used in this study were extracted from licuri leaves. The films were characterized using moisture, water-activity analyses and water vapor-permeability tests and were tested regarding their total phenolic compounds and mechanical properties. The antimicrobial and antioxidant efficacy of the films were evaluated by monitoring the use of the active films for packaging cheese curds and butter, respectively. The cellulose nanocrystals increased the mechanical strength of the films and reduced the water permeability and water activity. The active film had an antimicrobial effect on coagulase-positive staphylococci in cheese curds and reduced the oxidation of butter during storage.

  9. Starch films from a novel (Pachyrhizus ahipa) and conventional sources: Development and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, Olivia V., E-mail: ovlopez75@yahoo.com.ar; Garcia, Maria A.

    2012-10-01

    Biodegradable films from ahipa, cassava and corn native starches were developed by casting method and their physicochemical, mechanical and barrier properties were analyzed taking into account the different starch botanical sources. Filmogenic suspensions were prepared; their rheological behaviors were studied and all of them exhibited film-forming ability. However, mechanical assays demonstrated that unplasticized films were too rigid, limiting their technological applications. Thus, 1.5% w/w of glycerol as plasticizer was added to filmogenic suspensions and film flexibility and extensibility were improved, this effect was more significant for ahipa and cassava starch films. Furthermore, thickness, moisture content and water solubility of the developed films were increased when plasticizer was incorporated. Glycerol addition reduced film water vapor permeability and the lowest reduction corresponded to cassava starch films due to the high viscosity of its filmogenic suspensions. Plasticized starch films resulted to be UV radiation barriers; ahipa starch films had the lowest light absorption capacity and higher transparency than cassava and corn starch films. Dynamic-mechanical analysis indicated that plasticized films were partially miscible systems exhibiting two relaxations, one attributed to the starch-rich phase and the other to the glycerol-rich one. Likewise, it could be demonstrated that glycerol exerted a major plasticizing effect on ahipa starch matrixes. Highlights: Black-Right-Pointing-Pointer Ahipa, cassava and corn starch films were developed by casting method. Black-Right-Pointing-Pointer Glycerol effect on film mechanical behavior was major for tuberous starch films. Black-Right-Pointing-Pointer Ahipa starch films resulted to be more transparent with lower UV absorption capacity. Black-Right-Pointing-Pointer Plasticized films were partially miscible systems: with a glycerol-rich and a starch-rich phase. Black-Right-Pointing-Pointer Glycerol exerted

  10. Properties of cassava cross-linked carboxymethylated starch(Ⅰ)%木薯交联羧甲基淀粉的性质研究(Ⅰ)

    Institute of Scientific and Technical Information of China (English)

    谭义秋; 黄祖强; 农克良

    2013-01-01

    采用搅拌球磨机对木薯淀粉进行机械活化,以活化60 min的木薯淀粉为原料,环氧氯丙烷为交联剂,一氯乙酸钠为醚化剂制备交联羧甲基淀粉,对交联羧甲基淀粉的溶解度,糊的透明度、冻融稳定性、抗老化、抗酸、抗剪切等性质进行研究.结果表明,相对于交联淀粉,交联羧甲基淀粉的溶解度增大、糊的透明度增大;相对于羧甲基淀粉,交联羧甲基淀粉的溶解度减小,糊的透明度降低;相对于交联淀粉和羧甲基淀粉,交联羧甲基淀粉糊的冻融稳定性、抗老化、抗酸和抗剪切能力增强.%The cross-linked carboxymethylated starch was prepared by cassava starch, mechanically activated for 60 min by a stirring-type ball mill, as a starting material, epichlorohydrin as cross-linked agent, and sodium chloroacetate as etherifying a-gent. The properties of the cross-linked carboxymethylated starch, such as solubility, transparency, freeze-thaw stability, anti-retrogradation ability, anti-acid ability and anti-shearing ability, were studied. The results showed that solubility and transparency of the cross-linked carboxymethylated starch increased compared to the cross-linked starch; solubility and transparency of the cross-linked carboxymethylated starch decreased compared to carboxymethylated starch; and the freeze-thaw stability, anti-retrogradation ability, anti-acid ability, and anti-shearing ability of the cross-linked carboxymethylated starch were enhanced compared to the cross-linked starch and carboxymethylated starch.

  11. Endophytic fungi from the Amazonian plant Paullinia cupana and from Olea europaea isolated using cassava as an alternative starch media source.

    Science.gov (United States)

    Sia, Eliandra de Freitas; Marcon, Joelma; Luvizotto, Danice Mazzer; Quecine, Maria Carolina; Tsui, Sarina; Pereira, José Odair; Pizzirani-Kleiner, Aline Aparecida; Azevedo, João Lúcio

    2013-01-01

    Endophytic fungi live inside plants, apparently do not cause any harm to their hosts and may play important roles in defense and growth promotion. Fungal growth is a routine practice at microbiological laboratories, and the Potato Dextrose Agar (PDA) is the most frequently used medium because it is a rich source of starch. However, the production of potatoes in some regions of the world can be costly. Aiming the development of a new medium source to tropical countries, in the present study, we used leaves from the guarana (a tropical plant from the Amazon region) and the olive (which grows in subtropical and temperate regions) to isolate endophytic fungi using PDA and Manihot Dextrose Agar (MDA). Cassava (Manihot esculenta) was evaluated as a substitute starch source. For guarana, the endophytic incidence (EI) was 90% and 98% on PDA and MDA media, respectively, and 65% and 70% for olive, respectively. The fungal isolates were sequenced using the ITS- rDNA region. The fungal identification demonstrated that the isolates varied according to the host plant and media source. In the guarana plant, 13 fungal genera were found using MDA and six were found using PDA. In the olive plant, six genera were obtained using PDA and 4 were obtained using MDA. The multivariate analysis results demonstrated the highest fungal diversity from guarana when using MDA medium. Interestingly, some genera were isolated from one specific host or in one specific media, suggesting the importance of these two factors in fungal isolation specificity. Thus, this study indicated that cassava is a feasible starch source that could serve as a potential alternative medium to potato medium.

  12. Uso de fécula de mandioca na pó-colheita de manga 'surpresa' Use of cassava starch in the 'surpresa' mango postharvest

    Directory of Open Access Journals (Sweden)

    Laerte Scanavaca Júnior

    2007-04-01

    Full Text Available A manga é uma fruta tropical climatéria que amadurece rapidamente depois de colhida. Avaliou-se a vida útil pós-colheita de mangas 'Surpresa' utilizando recobrimento com película de fécula de mandioca. Os frutos foram mergulhados em suspensões a 0; 1; 2 e 3% de fécula de mandioca por três minutos, secos ao ar e armazenados em temperatura ambiente (± 29º C e ± 87% de umidade relativa. O delineamento utilizado foi o inteiramente casualizado, em fatorial de 4 x 5 (tratamentos x tempo. Foram avaliados a perda de massa fresca (%, a firmeza do fruto e da polpa, a acidez total titulável, os sólidos solúveis totais, a relação SST/ATT e o pH, além das cores da casca e da polpa. Os frutos foram avaliados aos 0; 3; 6; 9 e 12 dias. Os frutos tratados com 3% de fécula de mandioca reduziram a perda de água e melhoraram o aspecto visual dos frutos, e a logevidade deste tratamento foi de 12 contra 7 dias da testemunha.The mango is a tropical climacteric fruit that ripens quickly after having been picked. The useful postharvest life of 'Surpresa' mangos was evaluated using covering with cassava starch film. The fruits were immersed in suspensions to 1, 2 and 3% of cassava starch for three minutes, dried by the air and conserved in ambient temperature at ± 29º C of temperature and ± 87% of relative humidity. The outline used was entirely randomized and the experiment was carried out in 4 x 5 fatorial design (treatments x time. The loss of fresh mass (%, the firmness of the fruit and pulp, the total titratable acidity (TTA, the total soluble solids (TSS, the TSS/TTA relation and the pH, were evaluated besides of the colors of the peel and pulp. The fruits were evaluated on the 0, 3, 6, 9 and 12 days. The fruits treated with 3% of cassava starch reduced its loses of water and improved the visual aspect of the fruits, and the shelf life of this treatment was 12 against 7 days of the witness.

  13. Effect of the incorporation of antimicrobial/antioxidant proteins on the properties of potato starch films.

    Science.gov (United States)

    Moreno, Olga; Atarés, Lorena; Chiralt, Amparo

    2015-11-20

    Glycerol plasticized potato starch films containing bioactive proteins (lactoferrin (LF) and/or lysozyme (LZ), at 0.1 and 0.2 ratio with respect to starch) were obtained by casting method and characterized as to their microstructural, thermal and physical (water content, mechanical, water and oxygen barrier, optical) properties. The bioactive properties, named antioxidant and antimicrobial, of the proteins and the films were also characterized. The incorporation of proteins affected the structural and physical properties of potato starch films, while modifying their thermal behavior and increasing the glass transition temperature. Both proteins showed a certain degree of compatibility with starch chains through the bond formations (increase in Tg), while a part is separated and migrates to the film surface. Their incorporation, especially that of lactoferrin, greatly increased the film's brittleness, regardless of the films water content, although they enhance the water vapor and oxygen barrier properties, whatever the age of the film. Protein also reduced the film's transparency and gloss, while lactoferrin induced color changes. The thermal degradation of blend films and isolated proteins occurred at temperatures of over 250°C, which means that blend starch films can be thermoprocessed, according to their thermoplastic properties and following the usual practices of the plastics industries. A synergistic antimicrobial action against Escherichia coli and coliforms was observed when both LZ and LF were simultaneously applied. Both of these exhibited antioxidant capacity.

  14. determination of the specific growth rate on degradation of cassava ...

    African Journals Online (AJOL)

    user

    Menten Equation. In order ... Wastewater from cassava starch industry usually is a ... include sun drying, oven drying, and treatment with ..... Analysis of Contaminated Water Resources Due to. Cassava Wastewater Effluent Disposal. European.

  15. Envejecimiento de Almidones Termoplásticos Agrios de Yuca y Nativos de Papa por Microscopía de Fuerza Atómica Ageing of Sour Cassava and Native Potato Thermoplastic Starches by Atomic Force Microscopy

    Directory of Open Access Journals (Sweden)

    Harold A Acosta

    2006-01-01

    Full Text Available En este trabajo, se determinó la topografía de almidones termoplásticos (TPS agrio de yuca y nativo de papa, mediante microscopía de fuerza atómica (AFM, durante un periodo de 120 días de almacenamiento. Mezclas de almidones agrios (fermentados de yuca y nativo de papa, y glicerina, se procesaron en un extrusor de husillo sencillo. Láminas de TPS agrio de yuca (SCTPS y nativo de papa (NPTPS, se observaron y midieron por AFM (en modo contacto. Sus superficies mostraron incremento en rugosidad y partes lisas solo a altos contenidos de plastificante, pero SCTPS siempre tuvo menor rugosidad que NPTPS, debido a la fermentación natural del almidón agrio. Estos cambios se relacionaron con el tamaño, la forma del gránulo y particularmente con el contenido de plastificante. Los NPTPS de mayor rugosidad presentaron separación de fases a los 120 días, dada la retrogradación de las moléculas del almidón, que tienden a formar cristalitos. Estos resultados indican que el almidón agrio de yuca puede retardar la retrogradación de almidones termoplásticos, lo cual es importante durante el desarrollo de nuevos empaques biodegradables.This study reports on the topography of thermoplastic starches (TPS from sour cassava and native potato using atomic force microscopy (AFM, over a 120 day-storage period. Mixtures of sour cassava (fermented and native potato starches plus glycerine, were processed using a single-screw extruder. Sour cassava thermoplastic starch (SCTPS and native potato thermoplastic starch (NPTPS films were observed and measured by AFM (in contact mode. Their surfaces showed increased rugosity, and smooth parts only at high plasticizer content. However, SCTPS always had lower rugosity than NPTPS, due to the natural fermentation of sour cassava starch. These changes were related to starch granule size and shape, and particularly to plasticizer content. NPTPS with higher rugosity presented phase separation at 120 days, due to

  16. Study on the properties of cassava hydroxypropyl and octenyl succinic anhydride compound modified starch%木薯羟丙基化辛烯基琥珀酸酯化复合改性淀粉的性质研究

    Institute of Scientific and Technical Information of China (English)

    雷欣欣; 张本山; 周雪

    2012-01-01

    以木薯淀粉为原料制备木薯羟丙基化辛烯基琥珀酸酯化复合改性淀粉,采用傅里叶变换红外谱仪、扫描电镜、X射线衍射仪和Brabender黏度仪等对木薯羟丙基化辛烯基琥珀酸酯化复合改性淀粉的物化性质进行了测定和分析.并与木薯原淀粉和木薯辛烯基琥珀酸淀粉酯进行对比。结果表明,木薯淀粉经复合改性后,在1550-1610cm-1出现新的吸收峰.与原木薯淀粉和木薯SSOS相比,在940、880、730、570cm-1处呈现较弱的吸收峰;复合改性后颗粒表面受损严重.颗粒的形状也发生明显改变,但晶体类型没有发生改变;乳化性能和透明度得到提高;起糊温度、峰值温度降低.糊粘度增大;与单一的辛烯基琥珀酸酯化改性淀粉相比,热糊稳定性升高,凝沉性增强。%The cassava starch was used to prepare cassava hydroxypropyl and octenyl succinic anhydride compound modified starch. The physical properties of cassava hydroxypropyl and octenyl succinic anhydride compound modified starch were investigated by Fourier transform infrared spectrometer(FT-IR),Scanning electron microscop,X-ray diffraction(XRD),Brabender viscometer and so on with the comparison of the native cassava starch and octenyl succinic anhydride(OSA)-modified cassava starch. The results indicated that the FT-IR spectrum of compound modified cassava starch showed new absorption peaks at 1550-1610cm-1. and weaken absorption peak at the 940,880,730 and 570cm-1,compared with the native cassava starch and OSA- modified cassava starch. The starch granule exhibited rougher surface,more irregular shape significantly but the crystalline was not changed. The product showed good emulsifiability and transparency. That gelatinization temperature and the peak temperature all decreased,and paste viscosity was higher as well.The setback capacity was weaker,and hot paste stability increased,compared with single octenyl succinic anhydride

  17. Preparation and properties of resistant starch from fresh cassava%鲜木薯抗性淀粉的制备与性质

    Institute of Scientific and Technical Information of China (English)

    薛慧; 闫庆祥; 蒋盛军; 张国治; 台建祥; 吕飞杰

    2013-01-01

    Many studies have shown that resistant starch has health benefits such as preventing colon cancer, reducing the risk of ulcerative colitis, increasing absorption of minerals, inhibiting fat accumulation and hypoglycemic effects. In this study, the cassava starch was used as raw material. The resistant starch was prepared by autoclaving assisted enzyme treatment. To improve the content of resistant starch, the parameters of enzyme treatment that include adding amounts ofα-amylase, reaction time ofα-amylase, adding amounts of pullulanase and reaction time of pullulanase were optimized with a response surface methodology. The F-value of 57.58 implies the model is significant. The Lack of Fit F-value of 1.66 implies the Lack of Fit is not significant relative to the pure error. The Pred R-Squared of 0.9156 is in reasonable agreement with the Adj R-Squared of 0.9659 and the R-Squared is 0.9829. This model can be used to navigate the design space. The optimized conditions were that when 10%of the starch slurry concentration was autoclaved at 120℃ for 80min, added 1Uα-amylase per gram of starch to react 15.75 min at 95℃, debranched with 0.83U pullulanase per gram of starch at 55℃ for 5.86h, then treated with ultrasonic for 2min, and finally retrograded at 4℃ for 24h to improve resistant starch formation, the content of resistant starch increased to 15.48%. Compared with raw starch, the granule appearance of resistant starch changed under scanning electron microscopy. X-ray diffraction showed that the cassava starch had an A type pattern with sharp peaks at 15°, 17°, 18°and 23°. However, the resistant starch had a B type pattern with sharp peaks at 17°and 22°. The crystallinity of resistant starch improved with increasing resistant starch content. The in vitro digestion results indicated that total carbohydrate digestion products were decreased with increasing resistant starch content and that digestion rates were decreased with increasing incubation time

  18. Modification on liquid retention property of cassava starch by radiation grafting with acrylonitrile. I. Effect of γ-irradiation on grafting parameters

    Science.gov (United States)

    Kiatkamjornwong, S.; Chvajarernpun, J.; Nakason, C.

    1993-07-01

    Radiation modification on liquid retention properties of native cassava starch, gelatinized at 85°C, by graft copolymerization with acrylonitrile was carried out by mutual irradiation to gamma-rays. A thin aluminum foil was used to cover the inner wall of the reaction vessel, so that the homopolymer concentration was reduced to be less than 1.0% with a distilled water retention value of 665 g/g of the dry weight of the saponified grafted product. Confirmation of graft copolymerization and saponification reactions was made by the infrared spectrophotometric technique. The combined effect of radiation parameters in terms of an irradiation time and a dose rate to the total dose on the extent of the grafting reaction expressed in terms of grafting parameters which directly influenced liquid retention values was evaluated in conjunction with statistical analysis.

  19. Effect of the mode of incorporation on the disintegrant properties of acid modified water and white yam starches.

    Science.gov (United States)

    Odeku, Oluwatoyin A; Akinwande, Babatunde L

    2012-04-01

    Acid modified starches obtained from two species of yam tubers namely white yam - Dioscorea rotundata L. and water yam - D. alata L. DIAL2 have been investigated as intra- and extra-granular disintegrants in paracetamol tablet formulations. The native starches were modified by acid hydrolysis and employed as disintegrant at concentrations of 5 and 10% w/w and their disintegrant properties compared with those of corn starch BP. The tensile strength and drug release properties of the tablets, assessed using the disintegration and dissolution (t 50 and t 80 - time required for 50% and 80% of paracetamol to be released) times, were evaluated. The results showed that the tensile strength and the disintegration and dissolution times of the tablets decreased with increase in the concentration of the starch disintegrants. The acid modified yam starches showed better disintegrant efficiency than corn starch in the tablet formulations. Acid modification appeared to improve the disintegrant efficiency of the yam starches. Furthermore, tablets containing starches incorporated extragranularly showed faster disintegration but lower tensile strength than those containing starches incorporated intragranularly. This emphasizes the importance of the mode of incorporation of starch disintegrant.

  20. THERMOPLASTIC STARCH FILMS. INFLUENCE OF INCORPORATION OF HYDROXYPROPYL-METHYL-CELLULOSE AND CITRIC ACID

    Directory of Open Access Journals (Sweden)

    Rodrigo Ortega Toro

    2014-12-01

    Full Text Available The aim of this work was to analyze the influence of citric acid (CA and hydroxypropyl-methyl-cellulose (HPMC addition in thermoplastic starch films obtained by compression-molding. Two ratios of HPMC- starch (10% and 20% were considered while starch: CA ratio was of 1: 0,01. The films were characterized as to micro- and nano-structure using Scanning Electron Microscopy (SEM and X-ray diffraction. Further, the water solubility, CA linked, mechanical and thermal properties were characterized. The starch-HPMC films showed phase separation although the glass transition analysis showed partial miscibility of the starch and HPMC which is accentuated with the addition of CA. The incorporation of HPMC and CA promoted the decrease of water vapor permeability and a slight increase in the oxygen permeability. The CA addition resulted in an increase of the elasticity modulus and decrease in the extensibility of films, which agrees with the cross-linking effect. The optical properties show a decrease in the material compactness with the CA presence causing higher film transparency

  1. Synthesis, characterization, swelling and dye adsorption properties of starch incorporated acrylic gels.

    Science.gov (United States)

    Mandal, Bidyadhar; Ray, Samit Kumar

    2015-11-01

    Several hydrogels were prepared by a free radical polymerization of acrylic acid (AA), sodium acrylate (SA) and AA/hydroxy ethyl methacrylate (HEMA) in the presence of starch in water. These starch incorporated acrylic gels were prepared by varying the concentration of the initiator, monomer, crosslinker and the starch. The resulting gels were characterized by FTIR, SEM, XRD, DTA-TGA, pH at point zero charge (PZC), swelling and the diffusion in water. The gels showed high adsorption and removal% of Safranine T (ST) and Brilliant Cresyl Blue (BCB) dyes from water. The swelling and the adsorption data were fitted to different kinetic models and isotherms. Amongst the three kinds of gels, the starch incorporated sodium polyacrylate gel showed the highest adsorption of 9.7-85.3mg/L (97-61% removal) of BCB dye and 9.1-83mg/L (91-60% removal) of ST dye for a feed dye concentration of 10-140mg/L.

  2. Multi-objective optimization of bioethanol production during cold enzyme starch hydrolysis in very high gravity cassava mash.

    Science.gov (United States)

    Yingling, Bao; Li, Chen; Honglin, Wang; Xiwen, Yu; Zongcheng, Yan

    2011-09-01

    Cold enzymatic hydrolysis conditions for bioethanol production were optimized using multi-objective optimization. Response surface methodology was used to optimize the effects of α-amylase, glucoamylase, liquefaction temperature and liquefaction time on S. cerevisiae biomass, ethanol concentration and starch utilization ratio. The optimum hydrolysis conditions were: 224 IU/g(starch) α-amylase, 694 IU/g(starch) glucoamylase, 77°C and 104 min for biomass; 264 IU/g(starch) α-amylase, 392 IU/g(starch) glucoamylase, 60°C and 85 min for ethanol concentration; 214 IU/g(starch) α-amylase, 398 IU/g(starch) glucoamylase, 79°C and 117 min for starch utilization ratio. The hydrolysis conditions were subsequently evaluated by multi-objectives optimization utilizing the weighted coefficient methods. The Pareto solutions for biomass (3.655-4.380×10(8)cells/ml), ethanol concentration (15.96-18.25 wt.%) and starch utilization ratio (92.50-94.64%) were obtained. The optimized conditions were shown to be feasible and reliable through verification tests. This kind of multi-objective optimization is of potential importance in industrial bioethanol production.

  3. Physical, mechanical and barrier properties of corn starch films incorporated with plant essential oils.

    Science.gov (United States)

    Ghasemlou, Mehran; Aliheidari, Nahal; Fahmi, Ronak; Shojaee-Aliabadi, Saeedeh; Keshavarz, Behnam; Cran, Marlene J; Khaksar, Ramin

    2013-10-15

    Corn starch-based films are inherently brittle and lack the necessary mechanical integrity for conventional packaging. However, the incorporation of additives can potentially improve the mechanical properties and processability of starch films. In this work two essential oils, Zataria multiflora Boiss (ZEO) or Mentha pulegium (MEO) at three levels (1%, 2% and 3% (v/v)), were incorporated into starch films using a solution casting method to improve the mechanical and water vapor permeability (WVP) properties and to impart antimicrobial activity. Increasing the content of ZEO or MEO from 2% to 3% (v/v) increased values for elongation at break from 94.38% to 162.45% and from 53.34% to 107.71% respectively, but did not significantly change tensile strength values of the films. The WVP properties of the films decreased from 7.79 to 3.37 or 3.19 g mm m(-2) d(-1) kPa(-1) after 3% (v/v) ZEO or MEO incorporation respectively. The oxygen barrier properties were unaffected at the 1% and 2% (v/v) oil concentration used but oxygen transmission increased with 3% (v/v) for both formulations. The films' color became slightly yellow as the levels of ZEO or MEO were increased although transparency was maintained. Both films demonstrated antimicrobial activity with films containing ZEO more effective against Escherichia coli and Staphylococcus aureus than those containing MEO. These results suggest that ZEO and MEO have the potential to be directly incorporated into corn starch to prepare antimicrobial biodegradable films for various food packaging applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. 木薯抗性淀粉的酶法制备研究%Resistant Starch of Cassava Preparation by Enzymatic Hydrolysis

    Institute of Scientific and Technical Information of China (English)

    刘婷; 林莹; 古碧; 谭瑶瑶; 查春月; 吴亨

    2012-01-01

    Thermostable a-amylase or pullulanase was used for enzymatic hydrolysis of cassava starch, resistant starch yield of indicators to investigate the enzymatic hydrolysis kinetics of the process of its preparation. The results showed that resistant starch (RS) content was increased first and then less, with the increasing amount of enzyme thermostable a-amylase. RS content was up to 9.13% when the amount of enzyme was 30 U/g of starch reacted 10 min. RS content was increased first and then decreases with increasing degree of hydrolysis DE value trends, and the RS content was up to 9.13% when the DE value was 0.32. Pullulanase hydrolysis of cassava starch hydrolysis curve was followed a reaction equation. The RS content was up to 10.42% when the amount of enzyme was 4U/g of starch roled for 4 h, by that time the debranching degree was 28.51%. RS were significantly increased in the use of both thermostable a-amylase and pullulanase, which would improve the efficiency of preparation of the RS to the theoretical basis by used the complex enzyme.%以木薯淀粉为原料,使用耐高温α-淀粉酶或普鲁兰酶进行酶解,以抗性淀粉得率为指标探讨其制备过程的酶解动力学。结果表明利用耐高温α-淀粉酶制备抗性淀粉(KS),其RS含量随酶用量先增后减,在酶用量30U/g淀粉作用10min抗性淀粉含量达最高为9.13%;RS含量随水解程度DE值的增大呈先增后减趋势,DE值为0.32时抗性淀粉含量最高为9.13%;木薯淀粉的普鲁兰酶水解曲线遵循一级反应方程,在添加酶量为4U/g淀粉作用时间为4h,脱支度为28.51%时抗性淀粉含量达最高10.42%。耐高温α-淀粉酶和普鲁兰酶均能使抗性淀粉含量显著增加,这将为使用复合酶制备抗性淀粉提高其效率奠定理论基础。

  5. Energetic potential of biogas produced from cassava starch wastewater using a pilot scale two-stage anaerobic biodigester; Potencial energetico do biogas gerado no tratamento de aguas residuarias de fecularias em sistema piloto de biodigestao anaerobia com separacao de fases

    Energy Technology Data Exchange (ETDEWEB)

    Feiden, Armin [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Centro de Ciencias Agrarias]. E-mail: armin_feiden@yahoo.com.br; Cereda, Marney Pascoli [UNESP, Botucatu, SP (Brazil). Centro de Raizes Tropicais

    2003-06-01

    Cassava starch is extracted in more of 70 units in west of Parana state, South of Brazil. Near the border of the Parana river there is a big concentration of this type of industry. The cassava starch extraction generates a great quantity of wastewater. The aim of this work was to evaluate the energetic potential of biogas generated in the anaerobic treatment of cassava. The pilot reactors were located at a cassava processing factory, with cassava roots grauding capacity of 250 metric ton day{sup -1} at the parallel 24 deg 09'18'' South latitude and meridian 54 deg 09'26'' West longitude of Grw. The treatment pilot system was consisted of two settling tanks with 500 L each, connected in series, followed by a two-stage anaerobic biodigester reactor. The acidogenic reactor had a capacity of 1,000 L and the methanogenic had a capacity of 3,000 L. The experiment was conducted at temperatures ranging from 23.9 deg C to 27.7 deg C, with a annual average of 25.8 deg C. It was not used the addition of nutrients nor pH correction. The best results were obtained at a flow rate of 901 L d{sup -1} with a TOC (total organic carbon) loading rate of 0.565 g L{sup -1} d{sup -1} and COD (chemical oxygen demand) of 2.49 g L{sup -1} d{sup -1}, and a hydraulic residence time of 4.4 days. At this loading rate, the system had an average biogas yield of 3.975 L L{sup -1} wastewater 0.895 L L{sup -1} reactor day{sup -1}, and 0.391 L g{sup -1} TOC removed. The net biogas yield was 16.10 m{sup 3} ton{sup -1} cassava roots processed, with 28.65% CO{sub 2}. By calculation it was found that the biogas production is enough to supply 30% of the heat necessity to steam production of the industry, 100% of the heat necessity of direct drying of cassava starch, or 50% of the general total electricity need of the factory. (author)

  6. A study on starch profile of rajma bean (Phaseolus vulgaris) incorporated noodle dough and its functional characteristics.

    Science.gov (United States)

    Kumar, S Bharath; Prabhasankar, P

    2015-08-01

    Starch profile reflects functional characteristics like digestibility and product quality. A study was aimed to incorporate rajma in noodle processing to improve product and nutritional quality and also to reduce starch digestibility. It is known that some of the pulses like Kidney beans have an isoforms of Starch-Branching-Enzyme (SBE) helps in converting amylose to amylopectin. Rajma flour was incorporated at 10%, 20% and 30% with Triticumdurum and subjected to rheological, physico-chemical and amylose/amylopectin determination using High-Performance-Size-Exclusion-Chromatography (HPSEC). Results revealed that rajma flour decreased peak-viscosity from 954 to 683 BU and increased water absorption. Protein and dietary fiber content increased significantly. Sensory profile showed higher overall quality (>8.5). In vitro starch digestibility reduced from 65% to 49%. Starch profile from HPSEC showed changes in amylose:amylopectin peak, this may be because of the presence of SBE, further studies may be required to support the hypothesis.

  7. Structural and Digestion Properties of Soluble-, Slowly Digestible and Resistant Maltodextrin from Cassava Starch by Enzymatic Modification

    DEFF Research Database (Denmark)

    Sorndech, Waraporn

    to produce slowly digestible and resistant maltodextrin structures. Well-defined ratios of amylose only-barley starch (AO) and waxy maize starch (WX) with non-granular AO content varied from 0 to 100% were used as a substrate. For only BE catalysis, an increase rate of α-1,6 linkage formation for the 0% AO....... The combination of BEAMBE produced more resistant α-glucan products as compared to BE alone. The high amylose starch showed potential to apply as a raw material for enzymatic modification to produce slowly- and indigested dextrin. Slowly and resistant maltodextrin conferring isomaltooligosaccharides (IMO...

  8. Biscoitos de polvilho azedo enriquecidos com fibras solúveis e insolúveis Fermented cassava starch biscuits enriched with soluble and insoluble fibers

    Directory of Open Access Journals (Sweden)

    Flavio Martins Montenegro

    2008-12-01

    Full Text Available O presente trabalho avaliou a utilização de farelo de trigo e polidextrose como fontes de fibra no enriquecimento de biscoitos de polvilho. Utilizou-se a Metodologia de Superfície de Resposta para verificar a influência da adição destes ingredientes nos parâmetros de qualidade dos biscoitos. As respostas avaliadas do planejamento experimental fatorial completo 2² foram o volume específico, a dureza instrumental, a umidade e a cor - parâmetros L, a* e b*. Para as respostas: volume específico e dureza instrumental, todos os fatores foram significativos, a 95% de confiança, com R² = 0,9307 e 0,8091, respectivamente. Pela análise das superfícies geradas, pode-se observar que o farelo de trigo e a polidextrose reduziram o volume específico e o farelo teve maior efeito no aumento da dureza. A substituição de polvilho azedo por farelo de trigo e polidextrose nas proporções de 1,5 e 5%, respectivamente, gerou uma amostra rica em fibras, com 6,23% de fibra alimentar (calculado teoricamente, sem prejuízo considerável para as características de expansão e dureza, e com boa aceitação sensorial.This work evaluated the use of wheat bran and polidextrose as fiber sources to enrich fermented cassava starch biscuits. The Response Surface Methodology was used to verify the influence of the addition of these fiber sources on the quality parameters of the biscuits. The responses of the 2² central composite rotational experimental design that were evaluated were specific volume, hardness, and moisture and color - parameters L, a*, and b*. For the specific volume and hardness responses, all factors were significant: 95% confidence level, with R² of 0.9307 and 0.8091, respectively. Analyzing the surfaces obtained it could be observed that the wheat bran and polidextrose reduced the specific volume and the wheat bran had a greater effect in increasing hardness. The substitution of fermented cassava starch by wheat bran and polidextrose in

  9. 交联羧甲基玉米淀粉和交联酯化木薯淀粉的制备与性质研究%Study on preparation and properties of cross-linked carboxymethyl corn starch and cross-linked esterified cassava starch

    Institute of Scientific and Technical Information of China (English)

    史娟; 杨海涛

    2011-01-01

    The optimum synthesis conditions of the cross-linked carboxymethyl corn starch and cross-linked esterified cassava starch and the key factors affecting the degree of substitution were studied. The physical properties of the two kinds of composite-modified starch, such as freeze-melt stability, light transmissivity, expansibility, were determined. The results showed that the freeze-melt stability, light transmissivity, expansibility of composite-modified starch all improved compared to the n-ative starch,and the cross-linked esterified cassava starch could be used in polluted water with better flocculation effect.%研究了制备交联羧甲基玉米淀粉和交联酯化木薯淀粉的最佳工艺条件及影响取代度的关键因素,并测定了两种复合变性淀粉的冻融稳定性、透光率、膨胀度等特性.结果表明:两种复合变性淀粉的冻融稳定性、膨胀度、透光率等性能均优于原淀粉;交联酯化木薯淀粉具有良好的絮凝效果可用于污水处理.

  10. 地膜覆盖对木薯生长发育和产量及淀粉含量的影响%Effects of Plastic Film Mulching on Development and Yield and Starch Content of Cassava

    Institute of Scientific and Technical Information of China (English)

    韦威旭; 韦民政; 覃维治; 陆柳英; 唐秀桦; 韦哲; 何虎冀; 甘秀芹; 韦本辉

    2009-01-01

    [Objective] The study was to explore cultivation techniques with less cost and high benefit for cassava.[Method] 2 planting patterns of plastic film mulching and no mulching (CK) were taken to plant cassava, the effects of plastic film mulching on growth of stem and leaf, yield components and starch content of cassava were studied.[Result] Plastic film mulching could improve the growth of stem and leaf of cassava at early and middle stage and increase the biomass of cassava.After plastic film mulching, the length and diameter of root tuber, number and weight of root tuber per plant and fresh root tuber yield per plot of cassava were increased by 17.79%, 14.61%, 14.28%, 76.14%, 76.09% resp.than that of CK.After plastic film mulching the starch content of cassava was decreased by 2% than that of CK, while the starch yield of cassava of the same area was increased by 65.35% than that of CK.[Conclusion] Plastic film mulching was the effective measurement of cultivation with less cost and high benefit for cassava, the yield increasing effect was realized through promoting stem and leaf growth of cassava at early and middle sate, improving root tuber diameter and root tuber weight per plant, and increasing the plumpness of root tuber.%[目的]探索木薯节本增效栽培技术.[方法]分别采用地膜覆盖与不覆膜(对照)2种方式种植木薯,研究地膜覆盖对木薯茎叶生长、产量构成因素及淀粉含量的影响.[结果]地膜覆盖可促进木薯前中期茎叶生长,增加木薯生物量;地膜和覆盖后,木薯的块根长度、块根直径、单株块根数、单株块根重和小区鲜块根产量分别较对照增加了17.79%、14.61%、14.28%、76.14%和76.09%;地膜覆盖后木薯的淀粉含量较对照降低2%,但相同面积木薯的淀粉产量较对照增加65.35%.[结论]地膜覆盖是木薯节本增效栽培的有效措施,其增产效应主要是通过促进木薯前中期茎叶生长、提高块根直径和

  11. Cross-linking reaction kinetics of non-crystalline cassava starch in middle and high temperature wet processes%非晶化木薯淀粉交联反应动力学

    Institute of Scientific and Technical Information of China (English)

    罗明辉; 邓燕芳; 卢龙

    2013-01-01

    以非晶化木薯淀粉为原料,通过湿法交联合成淀粉磷酸酯,研究了非晶化木薯淀粉交联反应动力学过程,计算出表观活化能 Ea,讨论了不同温度对交联反应速率的影响。通过与木薯原淀粉湿法交联对比,研究了非晶化处理对淀粉后续反应的影响。结果表明,非晶化处理后,淀粉交联反应的反应取代度和反应程度均提高,表观活化能降低了23%,反应活性得到大大提高。%The starch diphosphate was synthesized by non-crystalline cassava starch through wet process. The influence of temperature on reaction rate was discussed.The kinetics and apparent activation energy of non-crystalline cassava starch in cross-linking reaction were studied.Compared with raw cassava starch,the influence of non-crystallization on consequent reaction was studied.The results showed the degree of sub-stitution and extent of reaction were both increased after non-crystallization,the apparent activation energy was descended by 23%,and the reaction activity was improved.

  12. Synthesis of Superabsorbent Polymer of Cassava Starch Grafting Acrylic Acid%木薯淀粉-丙烯酸接枝共聚合成高吸水性树脂

    Institute of Scientific and Technical Information of China (English)

    樊红日; 张立颖; 黎洪; 尹丽

    2011-01-01

    [ Objective] The research aimed to study the synthesis of superabsorbent polymer by cassava starch. [ Method] Using acrylic acid and cassava starch as raw material, ammonium persulfate and anhydrous sodium sulfite as initiator, superabsorbent polymer was synthesized by aqueous solution polymerization. The effect of monomer-starch ratio, reaction temperature, reaction time, acrylic acid and its neutralization degree and the initiators dosage on the water absorption of the product were investigated. [ Result ] Water absorbency in deionized water and salt water of 0.9% NaCl were 1 844 g/g and 224 g/g respectively at room temperature within 1 h. [ Conclusion ] The study provided scientific basis for preparing superabsorbent polymer with acrylic acid and cassava starch.%[目的]研究木薯淀粉合成高吸水性树脂.[方法]以木薯淀粉和丙烯酸单体为原料,过硫酸铵-亚硫酸钠为引发剂,通过水溶液聚合法制得淀粉基高吸水性树脂.考察了淀粉与单体配比、反应温度、反应时间、中和度和引发剂用量等因素对产品吸水率的影响.[结果]得出产品在室温下1 h内吸去离子水1 844 g/g、0.9%NaCl盐水224 g/g.[结论]该研究为以木薯淀粉与丙烯酸为原料制备高吸水树脂提供科学依据.

  13. PREPARATION AND CHARACTERIZATION OF CO-PROCESSED EXCIPIENT-PREGELATINIZED CASSAVA STARCH PROPIONATE AS A MATRIX IN THE GASTRORETENTIVE DOSAGE FORM

    Directory of Open Access Journals (Sweden)

    Junaedi

    2011-11-01

    Full Text Available The gastroretentive dosage form is designed to prolong the gastric residence time of the drug delivery system whichalso results in the development of an appropriate excipient. The purpose of this study is to develop and characterize coprocessedexcipient made from carrageenan (kappa-iota = 1:1 and pregelatinized cassava starch propionate (PCSP inratios of 1:1, 1:2, and 1:3. PCSP was prepared with propionic anhydride in an aqueous medium. The product was mixedwith carrageenan (kappa-iota = 1:1, as well as characterized physicochemical and functional properties. The coprocessedexcipient was then used as a mucoadhesive granule and floating tablet. The USP Basket was selected toperform the dissolution test of the granules in HCl buffer (pH 1.2 and distilled water for 8 hours each. Mucoadhesiveproperties were evaluated using bioadhesive through a vitro test and wash-off test. As for the floating tablet, the USPPaddle was selected to perform the dissolution test of the tablets in 0.1 N HCl for 10 hours. The floating lag time andfloating time were tested in 0.1 N HCl for 24 hours. The result of these studies indicated that co-processed excipientcarrageenan-PCSP can retard dosage form in gastric and drug controlled release, thus making it a suitable material forthe gastroretentive dosage form.

  14. Growth kinetics of Saccharomyces cerevisiae in batch and fed-batch cultivation using sugarcane molasses and glucose syrup from cassava starch.

    Science.gov (United States)

    Win, S S; Impoolsup, A; Noomhorm, A

    1996-02-01

    Growth kinetics of Saccharomyces cerevisiae in glucose syrup from cassava starch and sugarcane molasses were studied using batch and fed-batch cultivation. The optimum temperature and pH required for growth were 30 degrees C and pH 5.5, respectively. In batch culture the productivity and overall cell yield were 0.31 g L-1 h-1 and 0.23 g cells g-1 sugar, respectively, on glucose syrup and 0.22 g L-1 h-1 and 0.18 g cells g-1 sugar, respectively, on molasses. In fed-batch cultivation, a productivity of 3.12 g L-1 h-1 and an overall cell yield of 0.52 g cells g-1 sugar were achieved in glucose syrup cultivation and a productivity of 2.33 g L-1 h-1 and an overall cell yield of 0.46 g cells g-1 sugar were achieved in molasses cultivation by controlling the reducing sugar concentration at its optimum level obtained from the fermentation model. By using an on-line ethanol sensor combined with a porous Teflon tubing method in automating the feeding of substrate in the fed-batch culture, a productivity of 2.15 g L-1 h-1 with a yield of 0.47 g cells g-1 sugar was achieved using glucose syrup as substrate when ethanol concentration was kept at a constant level by automatic control.

  15. Effect of growing period on the cassava starch properties of various cassava cultivars%生长期对不同品种(系)木薯淀粉特性的影响

    Institute of Scientific and Technical Information of China (English)

    林莹; 古碧; 李凯; 代道芳

    2011-01-01

    The effect was studied of growing period on the starch properties such as freeze-thaw stability, sediment stability and mean granule size of three cassava cultivars. Freeze-thaw stability was higher and sediment stability was lower in samples harvested at 6th month. The difference of freeze-thaw stability and sediment stability depend on cultivars through the extended growing period. Surface area mean particle size was small and volume mean diameter was large at 6th month. For all cultivars, sediment stability was found to have positively significant correlations with surface area mean particle size. For SE cultivar, sediment stability was positively significant correlated to volume mean particle diameter. For E cultivars, freezethaw stability was negatively significant correlated to surface area mean particle size.%研究生长期对3个品种(SC、E和C)木薯淀粉冻融稳定性、凝沉稳定性和粒径的影响.结果表明,生长期为6个月时,淀粉具有较好的冻融稳定性、较差的凝沉稳定性、较高的体积平均粒径以及较小的表面积平均粒径.相关性分析表明,3个品种木薯淀粉的凝沉稳定性与淀粉表面积平均粒径呈显著正相关,品种SC的淀粉凝沉稳定性与体积平均粒径显著正相关,品种E的冻融稳定性与淀粉表面积平均粒径呈极显著负相关.

  16. Oxidação dos amidos de mandioca e de milho comum fermentados: desenvolvimento da propriedade de expansão Oxidation of fermented cassava and corn starches: development of the expansion property

    Directory of Open Access Journals (Sweden)

    Alvaro Renato Guerra Dias

    2007-12-01

    Full Text Available Amidos de mandioca e de milho comum foram fermentados em laboratório a 20 °C, sendo uma fração seca ao sol e outra oxidada com peróxido de hidrogênio e secada artificialmente, visando o desenvolvimento da propriedade de expansão. Estudou-se a fermentação em 0, 10, 30 e 50 dias, sendo a propriedade de expansão no forneamento avaliada pelo teste do biscoito e o comportamento viscoamilográfico pelo RVA. Verificou-se que a fermentação promove modificação que auxilia na oxidação dos amidos de mandioca e de milho elevando a acidez titulável do produto. O amido de mandioca fermentado oxidado com exposição solar ou com peróxido de hidrogênio pode desenvolver a propriedade de expansão, já o amido de milho comum nessas condições não tem essa capacidade. Os melhores resultados para a propriedade de expansão foram no amido de mandioca oxidado com peróxido de hidrogênio aos 50 dias de fermentação.Cassava and corn starches were fermented in the laboratory at 20 °C, and a fraction was in the sun while another fraction was oxidized with hydrogen peroxide and dried artificially to develop the expansion property. Fermentation in 0, 10, 30 and 50 days was checked and the expansion property was evaluated by the baking test and viscoamilograph behavior (RVA. Fermentation was found to cause changes that help the oxidation of cassava and corn starches, increasing the product's titrable acidity. The fermented cassava starch, oxidized by exposure to sunlight or hydrogen peroxide, may develop the expansion property, but the corn starch did not display that ability under these conditions. The best results for the expansion property were obtained with cassava starch oxidized with hydrogen peroxide after 50 days of fermentation.

  17. 十二烷基苯磺酸木薯淀粉酯微波法制备工艺研究%Preparation technology of dodecyl benzene sulfonic acid cassava starch ester by microwave

    Institute of Scientific and Technical Information of China (English)

    张利伟; 薛行华; 赵法敏; 张永强; 李光

    2013-01-01

    Dodecyl benzene sulfonic acid cassava starch ester was prepared by microwave method with cassava starch as the raw material , sodium dodecyl benzene sulfonate as the esterification agent and sodium hydroxide as the catalyst .The effects of synthetic condition , such as molar ratio ( sodi-um dodecyl benzene sulfonate to glucose unit of cassava starch ) , reaction time , incubated tempera-ture and pH value , on the substitution degree were investigated .The best conditions by orthogonal design were the molar ratio of sodium dodecyl benzene sulfonate to cassava at 0.06 , reaction time 5 h and the incubated temperature 80 ℃, at which the degree of substitution was 0.010 0 .FT-IR and XRD revealed the changes in the structure of the esterified starch , and TG analysis also dis-played the decline of the hydrophilic and thermal stability of the esterified starch .%  以木薯淀粉为原料,十二烷基苯磺酸钠为酯化剂,NaOH为催化剂,采用微波法制备十二烷基苯磺酸木薯淀粉酯,并考察其合成的工艺条件。探讨了十二烷基苯磺酸钠与木薯淀粉葡萄糖单元的摩尔比、反应时间、反应温度和pH值对产物取代度的影响,用正交实验分析对制备工艺进行优化,并通过红外、X射线和热重分析表征了酯化淀粉的结构及其热稳定性。结果表明,在十二烷基苯磺酸钠与木薯淀粉葡萄糖单元摩尔比为0.06、反应时间5 h、反应温度80℃和pH为10的条件下制备的十二烷基苯磺酸酯淀粉的取代度最佳,取代度为0.0100。红外和X射线谱图证明了酯化淀粉结构的改变,热重分析表明酯化淀粉亲水性与热稳定性有所下降。

  18. Starch-based Antimicrobial Films Incorporated with Lauric Acid and Chitosan

    Science.gov (United States)

    Salleh, E.; Muhamad, I. I.

    2010-03-01

    Antimicrobial (AM) packaging is one of the most promising active packaging systems. Starch-based film is considered an economical material for antimicrobial packaging. This study aimed at the development of food packaging based on wheat starch incorporated with lauric acid and chitosan as antimicrobial agents. The purpose is to restrain or inhibit the growth of spoilage and/or pathogenic microorganisms that are contaminating foods. The antimicrobial effect was tested on B. substilis and E. coli. Inhibition of bacterial growth was examined using two methods, i.e. zone of inhibition test on solid media and liquid culture test (optical density measurements). The control and AM films (incorporated with chitosan and lauric acid) were produced by casting method. From the observations, AM films exhibited inhibitory zones. Interestingly, a wide clear zone on solid media was observed for B. substilis growth inhibition whereas inhibition for E. coli was not as effective as B. substilis. From the liquid culture test, the AM films clearly demonstrated a better inhibition against B. substilis than E. coli.

  19. 热塑性木薯淀粉回生过程的结构与性能研究%Study on Structure and Property of Thermoplasticitc Cassava Starch in Retrogradation Process

    Institute of Scientific and Technical Information of China (English)

    范丽兰; 刘钰馨; 莫羡忠; 李建鸣; 李雨露; 汤立洁

    2016-01-01

    Thermoplastic cassava starch materials was prepared with cassava starch as raw material and glycerin as plasticizer by melting mixing in a torque rheometer. The structures and properties of thermoplastic cassava starch were investigated by differential scanning calorimeter (DSC), polarizing microscope (PLM),Fourier transform infrared spectrometr (FTIR), X ray diffraction (XRD) and thermal gravimetric analysis (TG) during retrogradation process. The results indicated that the melting enthalpy of thermoplastic cassava starch material first increased then decreased over time. It had a highest melting enthalpy when the retrogradation time reached 7d, the number of starch spherulites reached the highest degree and the polarization cross was formed. Through FTIR, when the retrogradation played a main role, infrared absorption peaks had a blue-shift meanwhile hydrogen bonding action were weakened. When the degradation played a main, infrared absorption peaks had a red-shift and hydrogen bonding actions were strengthened. In addition, the crystal type turn from A+V to V in the retrogradation process of thermoplastic cassava starch, and the crystallinity was 40.44% by the calculation of TOPAS. The hydrogen bonding was take place between starch molecules, and made the thermal stability of starch material decreased in the retrogradation process.%以木薯淀粉为原料、甘油为增塑剂,通过转矩流变仪熔融共混制备热塑性木薯淀粉,利用差示扫描量热法(DSC)、偏光显微镜(PLM)、傅立叶红外(FTIR)、X射线衍射(XRD)和热重分析(TG)研究热塑性木薯淀粉材料在回生过程中的结构与性能变化。结果表明,随着回生时间的增加,热塑性木薯淀粉材料的回生焓先增大后减小,当回生时间为7d时达最高;木薯淀粉球晶出现且球晶的数目最多,偏光十字最规整,回生达最大程度。FTIR分析发现,当回生作用占主导地位,氢键作用力减弱

  20. 超声波处理对木薯淀粉糊理化性质的影响%Effects of Ultrasonic Treatment on Properties of Cassava Starch Paste

    Institute of Scientific and Technical Information of China (English)

    汪树生; 苏玉春; 陈光

    2012-01-01

    Cassava starch paste was ultrasonic-treated and the effects of ultrasonic on paste properties were determined. The results indicated that a 5-minuete ultrasonic treatment decreased the viscosity of cassava starch paste, but increased anti-shearing ability.Short time ultrasonic treatment increased transparency of the paste effectively, from 10.05 up to 38.5 after treated for 1.5 minuets. The retrogradation trend decreased after ultrasonic treatment and retrogradation intensity increased within 1.5 minutes, above which similar impact was found. Ultrasonic treatment was an effective modified method to alter the properties of cassava starch paste.%利用超声波对木薯淀粉糊液进行处理,研究超声作用对糊液特性的影响.结果表明:超声波处理降低了木薯淀粉糊液的粘度,提高了抗剪切作用能力,处理5min效果最明显;短时间的超声作用能有效改善淀粉糊液的透明度,处理1.5 min透明度最高,由原来的10.05上升到38.5;超声处理能延缓淀粉糊液的凝沉趋势,加强凝沉的强度,处理时间超过1.5 min后,效果接近.超声波处理可以作为一种有效的改变淀粉糊液特性的途径应用于淀粉的变性处理中.

  1. Study on Hydrolysis Process of Cassava Starch Used for Microbial Lipid Fermentation%用于微生物油脂发酵的木薯淀粉水解工艺的优化

    Institute of Scientific and Technical Information of China (English)

    张志斌; 颜日明; 曾庆桂; 汪涯; 朱笃

    2012-01-01

    In order to improve the lipid production of cassava starch, the process of cassava starch hydrolysis (CSH) was optimized using orthogonal experimental design and Uniform design. The results showed that the content of α-amylase and glucoamylase and the liquefaction temperature significantly influenced cassava starch amylolysis. The dextrose equivalent value was up to 97.3% when content of α-amylase and glucose amylase and liquefaction tem-perature were 756 u/g, 602 u/g and 92℃ , respectively. While the CSH was used as a carbon source,the biomass and total lipid content of Trichosporon cutaneum were 16.38g/L and 7.22 g/L respectively, which increased by 46. 25% and 41.12% as compared with those using glucose as a carbon source. Therefore, cassava starch hydrolysis, as a novel carbon source, is an ideal route to produce microbial lipid.%为了提高木薯淀粉的发酵产脂能力,采用正交实验和均匀设计法对木薯淀粉酶法水解工艺进行了优化,结果表明d一淀粉酶量、糖化酶量和液化温度对木薯淀粉水解有显著影响。当淀粉酶量为756U/g,糖化酶量为602U/g,液化温度为92℃,其水解DE值达到97.3%。以该水解液进行皮状丝胞酵母B3(rcutaneumB3)油脂发酵时,其生物量和油脂产量分别为16.38g/L和7.22g/L,比葡萄糖作为碳源的生物量和油脂产量高46.25%和41.12%,利用木薯淀粉水解液作为新型发酵碳源生产微生物油脂是一种理想的途径。

  2. Effects of Different Added Substances on the Rheological Properties of Hydroxypropyl Cassava Starch Paste%不同添加物对羟丙基木薯淀粉流变特性的影响

    Institute of Scientific and Technical Information of China (English)

    胡珊珊; 王颉; 孙剑锋; 刘亚琼; 牟建楼; 王娜

    2012-01-01

    淀粉糊流变特性是影响淀粉类食品加工品质的主要因素.利用流变仪测定了不同添加物质对羟丙基木薯淀粉流变特性的影响,结果表明:添加不同的物质均未改变羟丙基木薯淀粉糊的流体类型,各流变参数经Herschel-Bulkley模型进行拟合,拟合系数接近1.单甘酯、食盐、柠檬酸使羟丙基木薯淀粉糊的剪切应力不同程度降低,黏稠系数减小,流变特性指数增加;蔗糖酯、酪朊酸钠、黄原胶、CMC、瓜尔豆胶、蔗糖使羟丙基木薯淀粉糊的剪切应力明显提高,黏稠系数增加,流变特性指数减小.%The rheological property of starch pastes is an important influencing factor during the processing of starchy food. The effect of different added substances on the rheological properties of hydroxypropyl cassava starch was measured by rheometer. The results showed that: the fluid type of hydroxypropyl cassava starch was not altered by the different added substance, and the fitting coefficient closed to 1 as the rheological parameters was fitted by the Her-schel - Bulkley model. Monoglycerides,salt and citric acid had the same effect on the hydroxypropyl cassava starch, which made the shear stress reduced to varying degrees, the consistency index decreased and the flow index increased. Contrary to that,sucrose esters,sodium caseinate,xanthan gum,CMC,guar gum made the shear stress significantly increased, the consistency index increased and flow index decreased. The results of this study offered valuable references for the further processing of hydroxypropyl cassava starchy products.

  3. Solid Substrate Fermentation of Cassava Peel for Poultry Feed Ingredient

    Directory of Open Access Journals (Sweden)

    Stephanie

    2013-03-01

    Full Text Available Cassava peel which is not used during cassava starch extraction is one of potential resources for animal feed. However, cassava peel has low level protein content, high level crude fiber, and high level of toxic cyanogenic compound. These problems limit the utilization of cassava peel as feed. Solid substrate fermentation using mold may be a solution process to increase its nutritional value and decrease toxic level of cassava peel. In this paper, matters that related with cassava peel fermentation process are subsequently described, namely: (i problems of cassava peel; (ii biodegradation and detoxification process; (iii solid state fermentation methods on cassava peel; (iv nutritional quality of fermented cassava peel; and (v application of fermented cassava peel in poultry feed. The fermented cassava peel application is compared with those of cassava root and waste (onggok. Addition of nitrogen inorganic in the fermentation process increases the mold growth and protein content of the product, while fiber and cyanogenic contents are decreased due to mold degradation activity. The fermentation process may be carried out using only the cassava peel as the substrate or mixed with wheat flour, using indigenous microbes, Aspergillus niger or a white rot fungus, Panus tigrinus as inoculum. As well as fermented cassava root and waste, fermented cassava peel can be used to substitute maize as poultry feed, although it is reported that the optimum substitution in broiler ration is only 10%.

  4. Effects of processing on physical properties of extruded snacks with blends of sour cassava starch and flaxseed flour

    Directory of Open Access Journals (Sweden)

    Camila De Barros Mesquita

    2013-09-01

    Full Text Available The opportunity to supplement common cassava biscuits with a product of higher nutritional value meets consumer expectations. In this work it was studied the effects of process parameters and flaxseed addition on physical properties of expanded snacks. Extrusion process was carried out using a single screw extruder in a factorial central composite rotatable design with four factors: flaxseed flour percentage (0-20%, moisture (12-20%, extrusion temperature (90-130 °C and screw speed (190-270. The effect of extrusion variables was investigated in terms of expansion index, specific volume, water absorption index, water solubility index, color parameters (L*, a* ,b* and hardness. The data analysis showed that variable parameters of the extrusion process and flaxseed flour affected physical properties of puffed snacks. Among the experimental conditions used in the present study, expanded snack products with good physical properties can be obtained under the conditions of 10% flaxseed flour, 230 rpm screw speed, temperature of 90 °C and moisture of 12%.

  5. Produção de snacks extrusados à base de polvilho doce e fibra de laranja Production of extruded snacks from cassava starch and orange fiber

    Directory of Open Access Journals (Sweden)

    Magali Leonel

    2010-06-01

    Full Text Available Este trabalho teve por objetivo avaliar o efeito da umidade, temperatura de extrusão e rotação da rosca na produção de produtos extrusados expandidos com a utilização do polvilho doce e da polpa de laranja desidratada como matéria-prima. O processo seguiu delineamento central composto rotacional com três fatores, totalizando 15 tratamentos (oito pontos fatoriais, seis pontos axiais e um ponto central com seis repetições. Os produtos obtidos foram caracterizados quanto ao índice de expansão (IE, ao volume específico (VE, ao índice de solubilidade em água (ISA e à cor (L*, a* e b*. Os resultados mostraram efeito das condições operacionais do processo sobre as características físicas dos produtos, e produtos claros com maior expansão e menor solubilidade em água foram obtidos nas condições mais elevadas de temperatura (80-90°C, condições intermediárias de umidade (16% e rotação da rosca (218rpm.This research aimed to evaluate the effect of moisture, extrusion temperature and screw speed in the production of flax snacks using as raw material cassava starch and dehydrated orange pulp. The process followed the central composite rotational design to three factors, totaling 15 treatments (8 factorial points, 6 star points and 1 center point with 6 repetitions. The products obtained were characterized for expansion rate, specific volume, water solubility index and color (L*, a* and b*. The results showed the effect of operational conditions on the physical characteristics of products, and clear products with larger expansion and lower water solubility index were obtained in conditions of the highest temperature (80-90°C and moisture (16% and intermediate screw speed (218rpm.

  6. Effects of Dissolved Oxygen Tension and Ammonium Concentration on Polyhydroxybutyrate Synthesis from Cassava Starch by Bacillus cereus IFO 13690

    Directory of Open Access Journals (Sweden)

    Margono .

    2015-11-01

    Full Text Available generated by an Adobe application 11.5606 Attempting to get low price of raw material for producing polyhydroxybutyrate is always studied. Tapioca starch is one of the raw material with low price. The objective of this research was to study the effects of initial ammonium concentration and dissolved oxygen tension (doT on producing PHB by Bacillus cereus IFO 13690 with tapioca starch as the carbon source. This fermentation was carried out in 5 L fementors with a 2 L working volume, temperature of 30 oC, and agitation of 500 rpm. The pH medium was controlled at 5.6 after it came down from the initial pH of 6.8. Meanwhile, the initial doT was 100 % air saturation and also came down to and maintained at doT of experiment, i.e. 1 , 5 , or 10 % air saturation. The best result was obtained when the initial ammonium concentration was 5 g/L and the doT value maintained at 5 % air saturation. By this conditions, the cell growth reached 5,457 g cell dry weight/L containing PHB of 2.42 % cell dry weigh after 29 hours fermentation. Normal 0 36 false false false

  7. REKAYASA PROSES HIDROLISIS PATI DAN SERAT UBI KAYU (Manihot utilissima UNTUK PRODUKSI BIOETANOL Hydrolysis Process Design of Starch and Cassava (Manihot utilissima Fibers for Bioethanol Production

    Directory of Open Access Journals (Sweden)

    Yuana Susmiati

    2012-05-01

    Full Text Available Ethanol production from cassava (Manihot utilissima usually uses enzymatic process for starch hydrolysis. Enzymatichydrolysis by α-amylase and amyloglucosidase enzymes are not able to convert cassava fibers into sugars. Dilute acid hydrolysis is applied to convert both starch and fibers, which will increase the yield of simple sugars as fermentable sugars and resulting in high ethanol production. In this research there are two steps of dilute acid hydrolysis, first for starch hydrolysis at H SO concentration of 0.1-0.5 M, 5-15 minutes and second for fiber hydrolysis at 0.5-1.0 2 4M H SO , 10-20 minutes, at the same temperature of 121-127 oC and pressure of 1.0-1.5 atm. The disadvantage of acid hydrolysis is the formation of toxic compounds such as hydroxymethyl furfural (HMF which is inhibited yeast fermentation. Therefore, acid hydrolyzates were detoxified with NH OH before use as fermentation substrate. The best starch hydrolysis condition was obtained at 0.4 M H SO  for 10 minutes which gave 257.37 g/l of total sugars, 2 4229.38 g/l of reducing sugars, 89.59 of dextrose equivalent (DE and 0.57 g/l of HMF. While the best fiber hydrolysis performed at 1.0 M H SO  solution for 20 minutes which gave 79.74 g/l of total sugars, 70.88 g/l of reducing sugars, 2 488.99 of DE and 0.0142 g/l of HMF. Single direct acid hydrolysis was the most suitable substrate for yeast fermentationwith the ethanol concentration of 5.7 % (w/v and 30.5 % (w/w of ethanol yield. This result is comparable with enzymatic hydrolysis which gave ethanol yield of 30 % (w/w. ABSTRAK Produksi etanol dari ubi kayu biasanya menggunakan enzim untuk menghidrolisis pati. Hidrolisis secara enzimatismenggunakan enzim α-amilase dan amiloglukosidase tidak mampu mengkonversi serat menjadi gula. Hidrolisis asam  berkonsentrasi  rendah  dilakukan  untuk  mengkonversi  pati  dan  serat,  sehingga  gula-gula  sederhana  yang dapat difermentasi meningkat dan menghasilkan

  8. 处理木薯淀粉废水的厌氧反应器初次启动方法研究%Study on the initial start-up method of anaerobic reactor for treating cassava starch wastewater

    Institute of Scientific and Technical Information of China (English)

    任伯帜; 韦兴浩; 侯保林

    2012-01-01

    对处理木薯淀粉废水的EGSB厌氧反应器初次启动时的接种污泥选择、污泥驯化方法、厌氧反应器控制条件进行研究.当选用木薯酒精厂厌氧发酵污泥作为接种污泥,控制pH在6.8~7.6,VFA<1 000 mg/L,温度在26~28℃时,采用阶段进水驯化方式,经过近100 d的实际运行,成功培养出适应木薯淀粉废水的颗粒污泥,系统COD去除率达86%以上,厌氧反应器启动成功,运行状况良好,处理效果稳定.%everal factors such as the selection of inoculated sludge,method of sludge acclimatization and the condition of the anaerobic reactor control for treating cassava starch wastewater when initially started-up have been studied. When the anaerobic fermented sludge of the cassava alcohol plant is selected as inoculated sludge,its pH should be controlled at 6.8-7.6,VFA<1 000 mg/L,and temperature at 26-28 ℃ ,the influent water acclimatization in phasic mode is used. After running for almost 100 d,the granular sludge that is suitable for cassava starch has successfully been cultivated. Under these conditions,the removing rate of COD could be higher than 86% ,and the anaerobic reactor has started up smoothly and fluently, with stable treatment effect.

  9. 超临界CO2处理对木薯淀粉结构和性质的影响%Effects of supercritical CO2 treatment on structures and properties of cassava starch

    Institute of Scientific and Technical Information of China (English)

    白俊; 李习都; 谢新玲; 张友全

    2016-01-01

    Cassava starch was extracted in different conditions with supercritical carbon dioxide. The morphological characteristics and the gelating properties of the treated starch, such as particle morphology, swelling degree, crystalline structure, viscosity, retrogradation and freeze-thaw stability, were evaluated and compared with native cassava starch by using scanning electron microscope, X-ray diffraction analyzer, Brabender visco-analyser or other methods. As a result, it showed that with the change of the pressure, temperature and time of the treatment, the morphology of the treated starch was not obviously changed, but the swelling degree decreased and the crystallinity increased. It also found that the anti-precipitability of the treated starch gel was strengthened and the freeze-thaw stability reduced. Meanwhile, Brabender viscosity analysis suggested that the gelation temperature of the treated starch could be slightly raised and the peak viscosity of the treated starch gel decreased, while the thermal stability little changed. All the results indicated that thecassava starch molecules could be partially degraded and the ratio of amylose to amylopectin would increase in the process of supercritical treatment, leading to the alteration of some microstructure characteristics and gelating properties of cassava starch.%采用超临界二氧化碳萃取技术在不同条件下处理木薯淀粉,利用扫描电镜(SEM)、X射线衍射仪(XRD)、布拉班德(Brabender)黏度仪等分析手段,考察超临界处理对木薯淀粉颗粒形貌、膨胀度、结晶结构以及淀粉糊黏度、凝沉性、冻融稳定性等的影响。结果表明,随超临界压力、温度、处理时间的变化,样品颗粒外貌无明显改变,但膨胀度降低,结晶度增大;淀粉糊的凝抗性增强,淀粉凝胶冻融稳定性却降低;Brabender黏度分析显示经超临界处理后的淀粉样品糊化温度小幅度升高,糊峰值黏度降

  10. Effect of organoclay on morphology and properties of linear low density polyethylene and Vietnamese cassava starch biobased blend.

    Science.gov (United States)

    Nguyen, D M; Vu, T T; Grillet, Anne-Cécile; Ha Thuc, H; Ha Thuc, C N

    2016-01-20

    Linear low density polyethylene (LLDPE)/thermal plastic starch (TPS) blend was studied to prepare the biobased nanocomposite material using organoclay nanofil15 (N15) modified by alkilammonium as the reinforced phase. The LLDPE/TPS blend and its nanocomposites were elaborated by melt mixing method at 160 °C for 7 min. And the compounded sample was filmed by blowing method at three different zones of temperature profile which are 160-170-165 °C. The good dispersion of clay in the polymer blend matrix is showed by X-ray diffraction (XRD) and transmission electronic microscopy (TEM), and a semi-exfoliated structure was obtained. The thermal and mechanical properties of materials are enhanced when N15 is added to the mixture. The effect of N15 on morphology and particles size of TPS phase is also investigated. The biodegradation test shows that more than 60% in weight of LLDPE/TPS film is degraded into CO2, H2O, methane and biomass after 5 months in compost soil.

  11. Caracterização e análise sensorial de biscoitos de polvilho elaborados com diferentes níveis de farelo de mandioca Characterization and sensory analysis of cassava starch biscuits made with different levels of cassava bagasse

    Directory of Open Access Journals (Sweden)

    Janaína Pereira de Macedo Rodrigues

    2011-12-01

    Full Text Available Objetivou-se com este trabalho avaliar as características químicas, cor, volume específico e aceitabilidade, de biscoitos elaborados com diferentes níveis de farelo de mandioca desidratado. Realizou-se previamente a desidratação do farelo de mandioca e, em seguida, elaboraram-se formulações de biscoitos com concentrações de farelo de mandioca de 0% (BP, 2% (BF2, 4% (BF4, 6% (BF6 e 8% (BF8, em substituição à fécula de mandioca. Os dados foram analisados por meio da análise de variância, teste de Tukey, em nível de 5% de significância. O teor de fibra alimentar e os atributos de cor (L*, a* e b* dos biscoitos aumentaram significativamente com a adição do farelo de mandioca desidratado, o teor de fibra alimentar total variou de 5,47g 100g-1 a 11,40g 100g-1, o de proteínas variou de 6,66g 100g-1 a 7,26g 100g-1. Em 100g de biscoito de polvilho com 8% de farelo de mandioca, encontram-se atendidas 20%, 32%, 26%, 38%, 79%, 16% e 20% da ingestão dietética de referência para o cálcio, cobre, fósforo, magnésio, manganês, potássio e zinco, respectivamente. O volume específico dos biscoitos diminuiu com o aumento de farelo de mandioca. Os biscoitos apresentaram boa aceitabilidade para aparência, sabor e textura. Conclui-se que biscoitos de polvilho elaborados com farelo de mandioca desidratado constituem um produto com bom potencial nutricional e de boa aceitabilidade.This study evaluated the chemically composition, color, specific volume and acceptability of biscuits made with cassava bagasse dehydrated. Held prior to the dehydration of cassava bagasse, then prepared themselves for producing biscuits with concentrations of cassava bagasse from 0% (BP, 2% (BF2, 4% (BF4 6% (BF6 and 8% (BF8, instead of cassava starch. Data were analyzed by analysis of variance, Tukey at 5% level of significance. The dietary fiber content and attributes of color (L*, a* b* the biscuits increased with the addition of cassava bagasse dehydrated, the

  12. Características físicas de filmes biodegradáveis produzidos a partir de amidos modificados de mandioca Physical characteristics of cassava modified starch films

    Directory of Open Access Journals (Sweden)

    Celina Maria Henrique

    2008-03-01

    , foram mais permeáveis que o PVC. Porém, quando se compara o filme biodegradável de amidos modificados com o filme comercial de PVC, ainda há muito que se trabalhar na formulação para melhorar várias propriedades deste tipo de embalagem, que tem amplo uso atualmente.Cassava starches may be used as raw materials for developing biodegradable films. Some starch modification processes can make them miscible in cold water and others can modify their film properties, making them stronger and more flexible. The aim of this study was to evaluate the physical characteristics of biodegradable films developed from cassava modified starches using the casting process (dehydration of a filmogenic solution on Petri dishes. The modified starches used were cross linked, low and high viscosity carboxymethyl starches and esterified starch. Starch viscosity is an important property to produce the filmogenic solution and it was tested using the Rapid Visco Analyser (RVA. Excepting cross linked starch, all modified starches presented cold solubility. This property enables an easier preparation of the filmogenic solutions. However, all modified starches presented a severe reduction of setback values, property associated with film formation. The cassava modified starch films were compared to commercial PVC films of 0.0208 to 0.0217 mm thickness. The cassava modified starch films presented thickness values from 0.0551 to 0.1279 mm. The minimum thickness values were observed in pre-gelatinized and cross linked films. The scanning electron microscopy analysis of the films showed differences among the starches. The resulting films were transparent and homogeneous. There was no significant interference of film thickness in water vapor permeability and the films with 5% dry matter were more permeable than the PVC film. However, when modified starch films are compared to PVC commercial films, there is still much research to be made in the formulation to improve several properties necessary to

  13. Transcriptional response to petiole heat girdling in cassava

    Science.gov (United States)

    The heat-girdling technique, which is known to inhibit photoassimilate translocation, was performed on the petiole of cassava leaves at the end of the light cycle to inhibit starch remobilization during the night. The inhibition of starch remobilization caused significant starch accumulation at the ...

  14. Characterisation and role of Isoamylase1 (Meisa1 ) gene in cassava ...

    African Journals Online (AJOL)

    Characterisation and role of Isoamylase1 (Meisa1 ) gene in cassava. ... D Beyene, Y Baguma, SB Mukasa, C Sun, C Jansson. Abstract. The current concept for starch biosynthesis in plants is that amylopectin, the major fraction of starch, ...

  15. FUNCIONALES PROPERTIES SAGO STARCH (Maranta arundinacea

    Directory of Open Access Journals (Sweden)

    Clemente Granados C

    2014-12-01

    Full Text Available Maranta arundinacea sago whose rhizome is used in parts of Colombian for the production of products intended for human consumption. Starch was extracted and determined the functional properties of starches presented high water capacity % CRA (162,8% for sago, compared to 226% of cassava, a high rate of absorption of lipids % I.A.L (51% for sago, compared to 82,25% of cassava starch. Gelatinization temperature is relatively low (65-75ºC at 10 minutes compared to sago starch cassava with 70-75ºC in 20 minutes, has a high percentage of amylopectin (77% for sago starch, compared with 83,3% for cassava starch is a gel so that no retrograde and from a stable paste. As it is concluded that can be used as an alternative promising in the food industry.

  16. Production of acetone-butanol-ethanol (ABE) in direct fermentation of cassava by Clostridium saccharoperbutylacetonicum N1-4.

    Science.gov (United States)

    Thang, Vu Hong; Kanda, Kohzo; Kobayashi, Genta

    2010-05-01

    In this work, acetone-butanol-ethanol (ABE) fermentation characteristics of cassava starch and cassava chips when using Clostridium saccharoperbutylacetonicum N1-4 was presented. The obtained results in batch mode using a 1-L fermenter showed that C. saccharoperbutylacetonicum N1-4 was a hyperamylolytic strain and capable of producing solvents efficiently from cassava starch and cassava chips, which was comparable to when glucose was used. Batch fermentation of cassava starch and cassava chips resulted in 21.0 and 19.4 g/L of total solvent as compared with 24.2 g/L of total solvent when using glucose. Solvent productivity in fermentation of cassava starch was from 42% to 63% higher than that obtained in fermentation using corn and sago starches in the same condition. In fermentation of cassava starch and cassava chips, maximum butanol concentration was 16.9 and 15.5 g/L, respectively. Solvent yield and butanol yield (based on potential glucose) was 0.33 and 0.41, respectively, for fermentation of cassava starch and 0.30 and 0.38, respectively for fermentation using cassava chips.

  17. EFFECT OF INCORPORATING STARCH/SILICA COMPOUND FILLERS INTO UNCURED SSBR ON ITS DYNAMIC RHEOLOGICAL PROPERTIES

    Institute of Scientific and Technical Information of China (English)

    Hong Li; Yihu Song; Qiang Zheng

    2008-01-01

    The dynamic rheological properties of a composite composed of solution-polymerized styrene butadiene rubber (SSBR) filled with starch/silica (SiO2) compound fillers were studied by means of temperature,frequency and strain sweeps,respectively,and the influence of the starch content in the compound fillers (SCCF) on the rheological behaviors was discussed.It is found from frequency sweeps that a maximum of loss tangent (tanδ) appears at 20 rad/s,which is independent of SCCF.G' of the composites decreases whereas tanδ and critical strain (γc) of Payne effect increase with increasing SCCF.The reasons for these are believed to be that both SiO2 and starch could form filler networks due to interaction of hydrogen bounding between them,and the interactions between SiO2 and SSBR are stronger than those between starch and SSBR.Moreover,increasing SCCF in the compound fillers is in favor of improving the stability of the filler networks.Furthermore,tanδ values at 0℃ and 60℃ representing the properties for the wet traction and the rolling resistance of SSBR composites respectively can be improved by partial replacing SiO2 with starch.However,the reinforcement effect of starch to SSBR is weaker than that of SiO2 due to starch agglomeration.

  18. Effect of Acid Thinned and Acetylation Modification on the Properties of Cassava Starch%酸解和乙酰化改性对木薯淀粉性质的影响

    Institute of Scientific and Technical Information of China (English)

    李佳佳; 李航; 高群玉

    2012-01-01

    以木薯淀粉为原料,对酸解淀粉、乙酰化淀粉及酸解乙酰化淀粉的糊性质进行了研究,并用扫描电子显微镜、X射线衍射仪和傅里叶变换红外光谱仪对改性淀粉的形貌和结构进行了分析。结果表明:木薯淀粉经酸解改性改善了糊的透明度,膨胀度有所降低,糊化温度升高,峰值黏度显著降低,凝沉性有所改善;乙酰化改性增加了淀粉糊的透明度,膨胀度提高,降低了糊化温度,峰值黏度增加,糊的抗凝沉性增强但热糊稳定性差;酸解乙酰化复合改性显著提高了淀粉糊的透明度,降低淀粉的膨胀度及糊化温度,峰值黏度显著降低,抗凝沉性明显增强,冷、热糊稳定性提高。扫描电镜、X衍射数据及红外图谱表明,3种变性处理均没有改变木薯淀粉的晶型和基本结构,颗粒形貌也没有发生显著变化。%In order to study the influence of acid thinned and acetylation modification on the properties of cassava starch, the paste properties of acid thinned and acetylated cassava starch were investigated; the morphological and structural changes of the modified starches were observed and analyzed by means of SEM,XRD and FT-IR. The results showed that : after acid thinned modification , the transparency of the paste increased obviously, swelling power and peak viscosity was decreased, the gelatinized temperature was increased, and the retrogradation was improved;the acetylated starch gelatinization temperature was decreased, paste transparency was better ,retrogradation and swelling power increased, the peak viscosity was increased but hot paste stability was poor. The modification by acid thinned and aeetylation decreased the gelatinization temperature and swelling power of cassava starch, improved the paste transparency and retrogradation obviously, enhanced the cold and hot paste stability, and the peak viscosity was de- creased. The crystalline pattern were

  19. Influence of incorporated wild Solanum genomes on potato properties in terms of starch nanostructure and glycoalkaloid content.

    Science.gov (United States)

    Väänänen, Tiina; Ikonen, Teemu; Rokka, Veli-Matti; Kuronen, Pirjo; Serimaa, Ritva; Ollilainen, Velimatti

    2005-06-29

    Interspecific somatic hybrids produced by protoplast fusion between two wild Solanum species (S. acaule, acl; S. brevidens, brd) and cultivated potato Solanum tuberosum (tbr) were analyzed in terms of the starch nanometer-range structure and glycoalkaloid (GA) contents. The crystallinity of starch granules, the average size of starch crystallites, and the lamellar distances were obtained from tuber samples using wide-angle and small-angle X-ray scattering methods. These measurements showed that incorporation of wild genomes from either nontuberous (brd) or tuberous (acl) Solanum species caused no significant modifications of the nanostructure of potato starch. In contrast, the GA profiles of the hybrids, which were analyzed by LC-ESI-MS in both tuber and foliage samples, differed considerably from those of cultivated potato. Regardless of the low total tuber GA concentrations (approximately 9 mg/100 g of fresh weight), the somatic hybrids contained GAs not detected in the parental species. A high proportion of spirotype GAs consisting of 5,6-dihydrogenated aglycons, for example, alpha-tomatine and tomatidine bound with solatriose, and chacotriose were found in the hybrids. In conclusion, the foliage of interspecific hybrids contained a higher variation in the structures of GAs than did the tubers.

  20. Fécula de mandioca e farinha de aveia como substitutos de gordura na formulação de hambúrguer de carne ovina Cassava starch and oatmeal as fat replacers of lamb burgers

    Directory of Open Access Journals (Sweden)

    Larissa Mont'Alverne Jucá Seabra

    2002-12-01

    Full Text Available Nos produtos cárneos com teor de gordura reduzido, ingredientes têm sido utilizados para manter os atributos de qualidade e rendimento. As farinhas de mandioca e de aveia têm sido usadas como componentes úteis para melhorar as características de suculência e maciez em hambúrgueres com baixo nível de gordura. O objetivo do presente estudo foi verificar o efeito da fécula de mandioca e da farinha de aveia sobre as características físicas, químicas e sensoriais de hambúrgueres de carne ovina com teor de gordura reduzido. Foram testadas 4 formulações à base de carne ovina limpa: testemunha sem gordura adicionada (F1, com 9,15% de gordura ovina adicionada (F2, sem gordura adicionada e 2% de fécula de mandioca (F3 e sem gordura adicionada e 2% de farinha de aveia (F4. Foram avaliados durante o cozimento: composição centesimal, rendimento, encolhimento e capacidade de retenção de água, força de cisalhamento, cor e análise sensorial dos hambúrgueres. Os produtos nos quais foram adicionados os substitutos de gordura (F3 e F4 apresentaram menor teor de gordura, antes e depois de cozidos, menor encolhimento, maior rendimento e capacidade de retenção de água do que os das formulações F1 e F2. A força de cisalhamento e a intensidade de vermelho (a* foram menores nos produtos aos quais foram adicionados os substitutos de gordura (F3 e F4 do que nos produtos sem substituição (F1 e F2. Não foram detectadas diferenças na aceitação global dos produtos com diferentes formulações. Desta forma, conclui-se que o uso de fécula de mandioca e farinha de aveia pode ser uma alternativa de substituição de gordura em produtos de carne ovina de baixo nível de gordura tipo hambúrguer.Several ingredients have been successfully tested as fat replacers in meat products maintaining desirable attributes like tenderness, juiciness and cooking yield. Cassava starch and oatmeal have been used to maintain good texture, juiciness and overall

  1. Physical and Antimicrobial Properties of Starch-PVA Blend Films as Affected by the Incorporation of Natural Antimicrobial Agents

    Directory of Open Access Journals (Sweden)

    Amalia Cano

    2015-12-01

    Full Text Available In this work, active films based on starch and PVA (S:PVA ratio of 2:1 were developed by incorporating neem (NO and oregano essential oils (OEO. First, a screening of the antifungal effectiveness of different natural extracts (echinacea, horsetail extract, liquid smoke and neem seed oil against two fungus (P. expansum and A. niger was carried out. The effect of NO and OEO incorporation on the films’ physical and antimicrobial properties was analyzed. Only composite films containing OEO exhibited antibacterial and antifungal activity. Antibacterial activity occurred at low OEO concentration (6.7%, while antifungal effect required higher doses of OEO in the films. Incorporation of oils did not notably affect the water sorption capacity and water vapor barrier properties of S-PVA films, but reduced their transparency and gloss, especially at the highest concentrations. The mechanical response of the S-PVA films was also negatively affected by oil incorporation but this was only relevant at the highest oil ratio (22%. S-PVA films with 6.7% of OEO exhibited the best physical properties, without significant differences with respect to the S-PVA matrix, while exhibiting antibacterial activity. Thus, the use of OEO as a natural antimicrobial incorporated into starch-PVA films represents a good and novel alternative in food packaging applications.

  2. Physical and Antimicrobial Properties of Starch-PVA Blend Films as Affected by the Incorporation of Natural Antimicrobial Agents

    Science.gov (United States)

    Cano, Amalia; Cháfer, Maite; Chiralt, Amparo; González-Martínez, Chelo

    2015-01-01

    In this work, active films based on starch and PVA (S:PVA ratio of 2:1) were developed by incorporating neem (NO) and oregano essential oils (OEO). First, a screening of the antifungal effectiveness of different natural extracts (echinacea, horsetail extract, liquid smoke and neem seed oil) against two fungus (P. expansum and A. niger) was carried out. The effect of NO and OEO incorporation on the films’ physical and antimicrobial properties was analyzed. Only composite films containing OEO exhibited antibacterial and antifungal activity. Antibacterial activity occurred at low OEO concentration (6.7%), while antifungal effect required higher doses of OEO in the films. Incorporation of oils did not notably affect the water sorption capacity and water vapor barrier properties of S-PVA films, but reduced their transparency and gloss, especially at the highest concentrations. The mechanical response of the S-PVA films was also negatively affected by oil incorporation but this was only relevant at the highest oil ratio (22%). S-PVA films with 6.7% of OEO exhibited the best physical properties, without significant differences with respect to the S-PVA matrix, while exhibiting antibacterial activity. Thus, the use of OEO as a natural antimicrobial incorporated into starch-PVA films represents a good and novel alternative in food packaging applications.

  3. utilization of ensiled metabolizable mixture of cassava peel and caged

    African Journals Online (AJOL)

    Toluwande

    2011-09-05

    Sep 5, 2011 ... and maize duzza with a view to reduce cost of production [3, 4, 5] . Recent development ... of cassava either into starch, cassava flour or “garri.”[6]. ..... John MJ Alternative approaches to adoption of animal technology: In Proc. ... Determination of energy values of locally produced palm kernel and Coconut.

  4. Identification of the bacterial community responsible for traditional fermentation during sour cassava starch, cachaça and minas cheese production using culture-independent 16s rRNA gene sequence analysis

    Science.gov (United States)

    Lacerda, Inayara C. A.; Gomes, Fátima C. O.; Borelli, Beatriz M.; Faria Jr., César L. L.; Franco, Gloria R.; Mourão, Marina M.; Morais, Paula B.; Rosa, Carlos A.

    2011-01-01

    We used a cultivation-independent, clone library-based 16S rRNA gene sequence analysis to identify bacterial communities present during traditional fermentation in sour cassava starch, cachaça and cheese production in Brazil. Partial 16S rRNA gene clone sequences from sour cassava starch samples collected on day five of the fermentation process indicated that Leuconostoc citreum was the most prevalent species, representing 47.6% of the clones. After 27 days of fermentation, clones (GenBank accession numbers GQ999786 and GQ999788) related to unculturable bacteria were the most prevalent, representing 43.8% of the clones from the bacterial community analyzed. The clone represented by the sequence GQ999786 was the most prevalent at the end of the fermentation period. The majority of clones obtained from cachaça samples during the fermentation of sugar cane juice were from the genus Lactobacillus. Lactobacillus nagelli was the most prevalent at the beginning of the fermentation process, representing 76.9% of the clones analyzed. After 21 days, Lactobacillus harbinensis was the most prevalent species, representing 75% of the total clones. At the end of the fermentation period, Lactobacillus buchneri was the most prevalent species, representing 57.9% of the total clones. In the Minas cheese samples, Lactococcus lactis was the most prevalent species after seven days of ripening. After 60 days of ripening, Streptococcus salivarius was the most prevalent species. Our data show that these three fermentation processes are conducted by a succession of bacterial species, of which lactic acid bacteria are the most prevalent. PMID:24031676

  5. Quality evaluation of stiff porridges prepared from Irish potato (Solanum tuberosum) and pigeon pea (Cajanus cajan) starch blends.

    Science.gov (United States)

    Abu, Joseph Oneh; Enyinnaya, Chinma Chiemela; James, Samaila; Okeleke, Ezinne

    2012-06-01

    Quality attributes of stiff porridges prepared from Irish potato and pigeon pea starch blends were studied. Starches were extracted from Irish potato and pigeon pea using a wet extraction method. Various ratios of the starches were mixed and analyzed for chemical, functional and pasting properties. The starch blends were then prepared into stiff porridges for sensory evaluation using a 20-man sensory panel. Substitution of Irish potato starch with pigeon pea starch led to increases in protein (0.15 to 1.2%), fat (0.26 to 0.56%) and ash (0.30 to 0.69%) while the amylose content of the starch blends decreased (from 23.8 to 18.4%) respectively. Functional properties such as bulk density (0.75 to 0.60 g/cm(3)), water absorption capacity (3.1 to 2.6 g water/ g sample) and dispersibility (58.6 to 42.7%) decreased significantly (P stiff porridges were not adversely affected by pigeon pea starch inclusion. Therefore it should be possible to incorporate up to 50% of low digestible pigeon pea starch into Irish potato starch from legumes such as pigeon pea as alternatives to cassava starch in the preparation of stiff porridges. Such porridges made from Irish potato and legume starches could provide additional incentive for individuals requiring decreased and or slow starch digestibility such as diabetics.

  6. Production of methane by co-digestion of cassava pulp with various concentrations of pig manure

    DEFF Research Database (Denmark)

    Panichnumsin, Pan; Nopharatana, Annop; Ahring, Birgitte Kiær

    2010-01-01

    Cassava pulp is a major by-product produced in a cassava starch factory, containing 50-60% of starch (dry basis). Therefore, in this study we are considering its potential as a raw material substrate for the production of methane. To ensure sufficient amounts of nutrients for the anaerobic digest...

  7. Comparison of three cyanogen assays for total cyanogens in cassava (Manihot esculenta Crantz)

    DEFF Research Database (Denmark)

    Saka, J.D.K.; Mhone, A.R.K.; Brimer, Leon

    1997-01-01

    The sensitivity and reproducibility of three methods for determining the total cyanogenic potential (CNp) of 7 fresh and processed cassava varieties were determined and compared. The total cyanogen content of fresh cassava roots and three cassava products (kondowole, makaka, and starch) were...... analysed by the acid hydrolysis, microdiffusion with solid state detection and Cooke's enzymatic assays. The total cyanogen contents of the cassava, obtained by the three methods were not significantly different (p

  8. Qualidade microbiológica na obtenção de farinha e fécula de mandioca em unidades tradicionais e modelo Microbiological quality in the flour and starch cassava processing in traditional and model unit

    Directory of Open Access Journals (Sweden)

    Raquel Resende Dósea

    2010-02-01

    Full Text Available O objetivo deste trabalho foi avaliar a qualidade microbiológica de farinha e fécula durante as diferentes etapas do processamento de mandioca, em unidades tradicionais e em uma unidade modelo. Foram determinados índices de coliformes totais e termotolerantes, Bacillus cereus, Salmonela spp., bactérias e fungos nas farinhas e féculas. Não foram observadas presenças de B. cereus e Salmonella spp. na farinha e fécula de mandioca produzidas nas unidades estudadas. A incidência microbiana diminui com o avanço da etapa do processamento para obtenção de farinha e foi menor na unidade modelo. Após o processo de torra, a carga microbiana estava de acordo com os valores preconizados pela legislação brasileira, concluindo-se que essa etapa pode ser considerada como crítica na obtenção de farinha. Na obtenção de fécula, a carga microbiana nas unidades tradicionais são maiores que na modelo, e o aumento do número de extrações promove o aumento da incidência de microrganismos, sendo recomendadas apenas quatro extrações.The objective of this research was to evaluate microbiological contamination in the flour and starch during cassava processing in traditional and model units. The total and fecal coliforms indexes, Bacillus cereus, Salmonella, bacteria, yeast and fungi were determined. Bacillus cereus and Salmonella were not detected in any sample. The incidence of microorganisms decreased along the processing to obtain cassava flour, and is lower in model unit. After the roasting process, the microbial load was below the values established by the Brazilian legislation, and can be regarded as a critical step in obtaining cassava flour. Concerning starch production, the microbial load in the traditional units was higher than in the model units, and the increase of the extraction steps has promoted the growth of microorganisms. It's recommended the used of only 4 extractions.

  9. Techno-economic and environmental assessment of bioethanol production from high starch and root yield Sri Kanji 1 cassava in Malaysia

    Directory of Open Access Journals (Sweden)

    M. Hanif

    2016-11-01

    Full Text Available Transportation played a significant role in energy consumption and pollution subsequently. Caused by the intense growth of greenhouse gas emission, efficient and sustainable improvement of the transportation sector has elevated the concern in many nations including Malaysia. Bioethanol is an alternative and renewable energy that has a great potential to substitute for fossil gasoline in internal combustion engine (ICE. Although bioethanol has been widely utilized in road transport worldwide, the production and application of bioethanol in Malaysia is yet to be considered. Presently there is comprehensive diversity of bioethanol research on distillation, performance and emission analysis available worldwide. Yet, the study on techno-economic and feasibility of bioethanol fuel in Malaysia condition is unavailable. Thus, this study is concentrated on bioethanol production and techno-economic analysis of cassava bioethanol as an alternative fuel in Malaysia. Furthermore, the current study attempts to determine the effect of bioethanol employment towards the energy scenario, environmental and economy. From the economic analysis, determined that the life cycle cost for 54 ktons cassava bioethanol production plant with a project life time of 20 years is $132 million USD, which is equivalent to $0.11 USD per litre of bioethanol. Furthermore, substituting 5 % of gasoline fuel with bioethanol fuel in road transport can reduce the CO2 emissions up to 2,038 ktons in year 2036. In case to repay the carbon debt from converting natural forest to cassava cropland, cassava bioethanol required about 5.4 years. The cassava bioethanol is much cheaper than gasoline fuel even when 20 % taxation is subjected to bioethanol at current production cost. Thus, this study serves as a guideline for further investigation and research on bioethanol production, subsidy cost and other limitation factors before the extensive application of bioethanol can be implemented in

  10. Pepino japonês (Cucumis sativus L. submetido ao tratamento com fécula de mandioca Japonese cucumber (Cucumis sativus L. submitted of the treatment with cassava starch film

    Directory of Open Access Journals (Sweden)

    Kelen Cristina dos Reis

    2006-06-01

    Full Text Available Com o presente trabalho objetivou-se avaliar a qualidade e a vida útil do pepino (Cucumis sativus L., utilizando recobrimento com película de fécula de mandioca. Após seleção, amostras de pepino japonês foram mergulhadas em suspensões de fécula de mandioca a 0, 2, 3 e 4%, secos ao ar e armazenados em câmara fria a 5ºC e 95% de UR por 8 dias. As análises realizadas foram perda de massa, pH, sólidos solúveis (SS , acidez titulável (AT, Cor L*a*b e firmeza. O delineamento utilizado foi o DIC com 3 repetições, com os tratamentos dispostos em esquema fatorial 4 x 5. O valor encontrado para firmeza nas amostras tratadas com película a 4% foram menores em comparação aos outros tratamentos, isto, provavelmente se deve à plasticidade do tecido que estas amostras apresentaram. A película reduziu significativamente a perda de massa das amostras mantidas sob refrigeração. A aplicação de película de fécula de mandioca na concentração mais elevada (4%, proporcionou ao pepino um aspecto melhor de conservação, tornando o produto mais atraente.This work was made to evaluate the properties and postharvest life of cucumber (Cucumis sativus L. coated with cassava starch film. After the selection the fruits were dipped in suspensions 0, 2, 3 and 4% starch, dried naturally and stored in chamber cold (5ºC ± 1ºC and 90% ± 5% HR during 8 days and the analyses were done in the time zero and in intervals of 2 days. The analyses done were loss mass, titratable acidity (TA, pH, soluble solids (SS, color L*a*b and firmness. The test was conducted in completely randomized design, with three repetitions, with the treatments disposed in factory layout 4x5. The value found for firmness in the samples treated with biofilm at 4% was smaller in comparison to the other treatments, this, is probably due to the plasticity of the tissue that these samples presented. The film reduced the loss of mass of the samples maintained under refrigeration

  11. Saffron and beetroot extracts encapsulated in maltodextrin, gum Arabic, modified starch and chitosan: Incorporation in a chewing gum system.

    Science.gov (United States)

    Chranioti, Charikleia; Nikoloudaki, Aspasia; Tzia, Constantina

    2015-08-20

    Maltodextrin (MD-21DE), gum Arabic (GA), gum Arabic-modified starch (GA-MS), modified starch-chitosan (MS-CH) and modified starch-maltodextrin-chitosan (MS-MD-CH) were used as agents for beetroot and saffron coloring-extracts microencapsulation by freeze drying. The produced powders were evaluated in terms of coloring strength (E) during storage at 40°C for 10 weeks and a first-order kinetic was applied. Color parameters (L(*), a(*), b(*), C(*) and ΔE(*)) and water sorption behavior was also studied. Moreover, incorporation of the powders in a chewing gum model system was conducted. The type of encapsulating agent significantly (PGA>GA-MS>MS-CH>MS-MD-CH. The water sorption study revealed that MD and GA kept their structural integrity up to water activities of 0.66 and 0.82, respectively. The chewing gum samples produced with coloring extracts encapsulated in GA-MS showed the greatest a(*)(for beetroot) and b(*) (for saffron) values indicating a better protection.

  12. 絮凝法提取木薯黄浆废水中植物蛋白质的效果研究%The study of flocculation extracted starch of cassava yellow pulp wastewater

    Institute of Scientific and Technical Information of China (English)

    万思杰; 李小丽; 彭小玉

    2016-01-01

    文章采用混凝技术提取木薯黄浆废水中的植物蛋白质物质,实验通过选取最佳的混凝剂和助凝剂种类及其最佳用量,并研究 pH、沉淀时间对混凝效果的影响,为木薯黄浆废水的资源化利用提供科学依据。单因素实验结果表明:分别以1%的PAC、1%的氯化铁和1%的改性玉米淀粉处理木薯黄浆废水,三种絮凝剂的最佳投加量分别为0.133g/L、0.133g/L和0.05g/L,最佳絮凝pH分别为9、2和8,三种絮凝剂的沉淀时间均大于15min时处理效果较佳,此时木薯黄浆淀粉废水的浊度去除率均到达80%以上,COD去除率达到50%。复配实验结果表明:PAC与PAM的复配投加后,PAC投加量为0.02g/L,PAM投加量为0.002g/L,浊度去除率从80%左右上升至98.2%,COD去除率上升至51.8%,复配絮凝剂相比单一絮凝剂提取植物蛋白效果更好。%The purpose of this study is trying to use technology for cassava starch production coagulation pretreatment of wastewater, which includes selecting the best coagulant type, determine coagulant, the optimum coagulant dosage, pH studies on mixed coagulation effect for the comprehensive management of cassava starch wastewater to provide some design parameters. Experimental results that the single factor, 0.1%PAC and 1%ferric chloride dosage 0.133g/L, 1%modified corn starch dosage0.05g/L, ferric chloride optimum pH was 2, PAC and corn starch optimal pH were 9 and 8, the settling time process is effective when more than 15min. Through traditional flocculants in yellow cassava pulp wastewater to determine the cationic polyacrylamide (PAM) and aluminum chloride (PAC) compound used better. PAM and the PAM complex volume ratio is 10:1. PAC dosage can be reduced twice, turbidity removal efficiency rise to 98.2% from 80%, showing that not only enhances the compound flocculant flocculation effect, but also reduces the pharmaceutical dosage.

  13. Preparation and the properties of the composite films from cassava starch and guar gum%木薯淀粉-瓜尔胶复合膜的制备及性质研究

    Institute of Scientific and Technical Information of China (English)

    贾英

    2012-01-01

    The raw guar gum,anionic guar gum with cassava starch were blended to make composite basic edible film in the certain proportion.The films with different contents of starch and guar gum were respectively prepared and characterized.Their properties were measured.The film containing cassave starch and guar gum with the ratio of 80∶20 exhibited the good elongation(E).Compared with the pure starch film,tensile strength(TE)increased by 50%,E decreased by 30%,and the water vapor permeability decreased to 15.8%,water absorption changed a little.The film containing cassave starch and anionic guar gum with the ratio of 80∶20 had the good E.Compared with cassava starch film,the E increased by 142%,but the TE decreased by 22%.The water vapor permeability decreased by 5.4%,while the water absorption decreased by 5.5%.%研究木薯淀粉与瓜尔胶、木薯淀粉与阴离子瓜尔胶的复合膜,淀粉含量为复合基质量的100%、80%、60%、40%和20%制成复合膜,对膜的性质用红外、热重以及扫描电镜分别表征,对膜的力学性能、水蒸气透过率和吸水性能测试。分别以强度和伸长率为指标得出最优的复合膜配比。以强度为指标的最优复合膜成分:淀粉为80%,瓜尔胶为20%,得到样本1-2与原淀粉膜相比强度提高50%,伸长率下降30%,水蒸气透过率下降15.8%,吸水率几乎没有变化。以伸长率为指标的最优膜成分:淀粉80%,阴离子瓜尔胶20%,得到样本2-1与原木薯淀粉膜相比伸长率提高了142%,但强度降低了22%,水蒸气透过率下降了5.4%,吸水性降低了5.5%。成膜条件为:淀粉糊化温度为95℃,反应时间0.5 h,烘干温度为50℃。

  14. Cassava: an appraisal of its phytochemistry and its biotechnological prospects.

    Science.gov (United States)

    Blagbrough, Ian S; Bayoumi, Soad A L; Rowan, Michael G; Beeching, John R

    2010-12-01

    The present state of knowledge of the phytochemistry of small molecules isolated from the roots and leaves of cassava, Manihot esculenta Crantz (Euphorbiaceae), is reviewed. Cassava roots are an important source of dietary and industrial carbohydrates, mainly eaten as a source of starch, forming the staple food to over 500 million; additionally, the roots have value as a raw material for industrial starch production and for animal feed giving the crop high economic value, but it suffers markedly from post-harvest physiological deterioration (PPD). The hydroxycoumarins scopoletin and its glucoside scopolin as well as trace quantities of esculetin and its glucoside esculin are identified from cassava roots during PPD. The biotechnological prospects for cassava are also reviewed including a critical appraisal of transgenic approaches for crop improvement, together with its use for bioethanol production, due to cassava's efficient ability to fix carbon dioxide into carbohydrate. Copyright © 2010 Elsevier Ltd. All rights reserved.

  15. Cassava Genetic Transformation and its Application in Breeding

    Institute of Scientific and Technical Information of China (English)

    Jia Liu; Qijie Zheng; Qiuxiang Ma; Kranthi Kumar Gadidasu; Peng Zhang

    2011-01-01

    As a major source of food, cassava (Manihot esculenta Crantz) is an important root crop in the tropics and subtropics of Africa and Latin America, and serves as raw material for the production of starches and bioethanol in tropical Asia. Cassava improvement through genetic engineering not only overcomes the high heterozygosity and serious trait separation that occurs in its traditional breeding, but also quickly achieves improved target traits. Since the first report on genetic transformation in cassava in 1996, the technology has gradually matured over almost 15 years of development and has overcome cassava genotype constraints, changing from mode cultivars to farmer-preferred ones.Significant progress has been made in terms of an increased resistance to pests and diseases, biofortification, and improved starch quality,building on the fundamental knowledge and technologies related to planting, nutrition, and the processing of this important food crop that has often been neglected. Therefore, cassava has great potential in food security and bioenergy development worldwide.

  16. Desenvolvimento de snacks extrusados a partir de misturas de farinha de soja, fécula e farelo de mandioca Development of extruded snacks from blends of soya flour, cassava starch and bran

    Directory of Open Access Journals (Sweden)

    Fernanda Rossi Moretti Trombini

    2013-01-01

    Full Text Available Neste trabalho, objetivou-se avaliar o efeito das condições de extrusão sobre as propriedades físicas de produtos extrusados. Foi utilizado o delineamento central composto rotacional com quatro variáveis independentes (2(4 e a metodologia de superfície de resposta para avaliar os resultados de índice de expansão, volume específico, índice de absorção de água, índice de solubilidade em água e cor, de acordo com as variações de temperatura de extrusão, rotação da rosca, porcentagem de farelo de mandioca e porcentagem de farinha de soja. Os resultados indicam que é possível produzir novos produtos extrusados com boas propriedades físicas a partir de misturas de farinha de soja, fécula e farelo de mandioca.This study aimed to evaluate the effect of the extrusion conditions on physical properties of extruded products. A factorial central composite design (2(4 with four independent variables and the response surface methodology were used to evaluate the results of expansion index, specific volume, water absorption index, water solubility index and color, according to the variations in barrel temperature, screw speed, percentage of cassava bran and percentage of soya flour. The results indicate that is possible to produce new extruded products with good physical properties from blends of soya flour, cassava starch and bran.

  17. Effect of thermal and chemical modifications on the mechanical and release properties of paracetamol tablet formulations containing corn, cassava and sweet potato starches as filler-binders

    Directory of Open Access Journals (Sweden)

    Mariam Vbamiunomhene Lawal

    2015-07-01

    Conclusions: Modification of the experimental starches improved the mechanical and release properties of directly compressed paracetamol tablet formulations. Thus, they can be developed for use as pharmaceutical excipients in specific formulations.

  18. Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks Mudanças nas propriedades físicas de snacks extrusados de misturas de polvilho azedo e farinha de quinoa

    Directory of Open Access Journals (Sweden)

    Lívia Giolo Taverna

    2012-12-01

    Full Text Available Given the broad acceptance of sour cassava starch biscuits in Brazil and the nutritional quality of quinoa flour, this study aimed to evaluate the effect of extrusion temperature, screw speed, moisture, and amount of quinoa flour on the physical properties of puffed snacks. Extrusion process was carried out using a single-screw extruder in a factorial central composite design with four factors. Effects of moisture and amount of quinoa flour on the expansion index and specific volume of snacks were observed. There was a pronounced increase in water solubility index of blends with the extrusion process with significant effects of all process parameters on the WSI. Higher water absorption index (WAI was observed under high temperature, low moisture, and lower quinoa flour amount. Temperature and amount of quinoa flour influenced the color of the snacks. A positive quadratic effect of quinoa flour on hardness of products was observed. Blends of sour cassava starch and quinoa flour have good potential for use as raw material in production of extruded snacks with good physical properties.Dada a ampla aceitação do biscoito de polvilho azedo no Brasil e a qualidade nutricional da farinha de quinoa, este trabalho objetivou avaliar o efeito da temperatura de extrusão, rotação da rosca, umidade e porcentagem de farinha de quinoa sobre as propriedades físicas de snacks expandidos. O processo foi realizado em extrusor monorrosca, seguindo o delineamento central composto rotacional para quatro fatores. Foi observado o efeito da umidade e da porcentagem de farinha de quinoa sobre o índice de expansão e volume específico. Houve um aumento pronunciado na solubilidade das misturas com o processo de extrusão, com efeitos significativos de todos os parâmetros de processo no ISA. Maior índice de absorção de água (IAA foi observado em alta temperatura, baixa umidade e menor porcentagem de farinha de quinoa. Temperatura e porcentagem de farinha de

  19. Cassava biology and physiology.

    Science.gov (United States)

    El-Sharkawy, Mabrouk A

    2004-11-01

    Cassava or manioc (Manihot esculenta Crantz), a perennial shrub of the New World, currently is the sixth world food crop for more than 500 million people in tropical and sub-tropical Africa, Asia and Latin America. It is cultivated mainly by resource-limited small farmers for its starchy roots, which are used as human food either fresh when low in cyanogens or in many processed forms and products, mostly starch, flour, and for animal feed. Because of its inherent tolerance to stressful environments, where other food crops would fail, it is often considered a food-security source against famine, requiring minimal care. Under optimal environmental conditions, it compares favorably in production of energy with most other major staple food crops due to its high yield potential. Recent research at the Centro Internacional de Agricultura Tropical (CIAT) in Colombia has demonstrated the ability of cassava to assimilate carbon at very high rates under high levels of humidity, temperature and solar radiation,which correlates with productivity across all environments whether dry or humid. When grown on very poor soils under prolonged drought for more than 6 months, the crop reduce both its leaf canopy and transpiration water loss, but its attached leaves remain photosynthetically active, though at greatly reduced rates. The main physiological mechanism underlying such a remarkable tolerance to drought was rapid stomatal closure under both atmospheric and edaphic water stress, protecting the leaf against dehydration while the plant depletes available soil water slowly during long dry periods. This drought tolerance mechanism leads to high crop water use efficiency values. Although the cassava fine root system is sparse, compared to other crops, it can penetrate below 2 m soil,thus enabling the crop to exploit deep water if available. Leaves of cassava and wild Manihot possess elevated activities of the C4 enzyme PEP carboxylase but lack the leaf Kranz anatomy typical of C4

  20. Development of Jackfruit Crackers: Effects of Starch Type and Jackfruit Level

    Directory of Open Access Journals (Sweden)

    Nor Afizah Mustapha

    2015-01-01

    Full Text Available Crackers are one of the convenient and inexpensive snacks that have high market potential.  Most of the commercial crackers are carbohydrate-rich and normally considered as a low value-added product.  In this study, innovative value added crackers made of jackfruit were developed.  The effect of starches (sago and cassava and levels of jackfruit (30 and 50%, w/w on characteristics of the crackers were investigated.  Physicochemical properties of the products at each predetermined processing steps (steaming, drying and frying; bulk density, expansion ratio, color and carotenoid contents were measured.  A decrease in jackfruit level resulted in crackers with lower bulk density (0.26 to 0.41 g/cm3 and higher volume expansion ratio (2.84 to 4.66 cm3.  Blending the cassava and sago starch at 1:1 ratio resulted in lower bulk density and higher expansion ratio compared to crackers made with a single type of starch.  The L* and b* values decreased with drying and frying process, indicative of Maillard reactions.  The higher L* value was influenced by the starch content, while higher jackfruit led increased the b* values, attributed to the presence of pigments in the fruit.  Total carotenoid contents of fried crackers increased following steaming process, ranging from 0.061 to 0.199 mg/100g and samples made with blend of sago and cassava has the highest carotenoid contents.  A jackfruit level of 30% (w/w made with blend of sago and cassava starches (1:1 produced fried crackers with the most acceptable physicochemical characteristics.  Crackers with improved nutritional value can be developed by incorporating jackfruit, thus expanding the conventional use of the fruit.

  1. Transcriptional response to petiole heat girdling in cassava.

    Science.gov (United States)

    Zhang, Yang; Ding, Zehong; Ma, Fangfang; Chauhan, Raj Deepika; Allen, Doug K; Brutnell, Thomas P; Wang, Wenquan; Peng, Ming; Li, Pinghua

    2015-01-01

    To examine the interactions of starch and sugar metabolism on photosynthesis in cassava, a heat-girdling treatment was applied to petioles of cassava leaves at the end of the light cycle to inhibit starch remobilization during the night. The inhibition of starch remobilization caused significant starch accumulation at the beginning of the light cycle, inhibited photosynthesis, and affected intracellular sugar levels. RNA-seq analysis of heat-treated and control plants revealed significantly decreased expression of genes related to photosynthesis, as well as N-metabolism and chlorophyll biosynthesis. However, expression of genes encoding TCA cycle enzymes and mitochondria electron transport components, and flavonoid biosynthetic pathway enzymes were induced. These studies reveal a dynamic transcriptional response to perturbation of sink demand in a single leaf, and provide useful information for understanding the regulations of cassava under sink or source limitation.

  2. Effects of sodium chloride and sodium sulfate on the cross-linking reaction of cassava starch%氯化钠及硫酸钠对木薯淀粉交联反应的影响

    Institute of Scientific and Technical Information of China (English)

    熊小雅; 叶为标; 高群玉

    2016-01-01

    The experiment was designed to determine the relationships between osmotic pressure and degree of substitution,and the viscosity characteristics of the starch samples. Brabender viscometer was used for the determination of cross–linked cassava starch that dealed with osmotic pressure. When sodium chloride was used as osmotic pressure enhancer in cross–linking reaction,with the increase of osmotic pressure,the initial gelatinization temperature increased,and the peak viscosity and the final viscosity decreased. As the osmotic pressure reached high,the retrogradation value and the breakdown value both tended to zero. When sodium sulfate was used instead of sodium chloride,as the osmotic pressure increased,the initial gelatinization temperature didn’t change significantly,the peak viscosity leveled off following decrease,the final viscosity increased(not significant)after decrease,the breakdown value was in contrast with the final viscosity,and the retrogradation decreased. The degree of crosslinking increased with the increase of osmotic pressure that produced by sodium chloride or sodium sulfate. In addition,we utilized polarizing microscope and FTIR to analyze the cross–linked cassava starch that dealed with osmotic pressure,and measured their transparency,shear resistance and retrogradation resistance,the results showed that the corresponding properties of the cross–linked starch changed.%旨在确定渗透压与交联取代度和所得淀粉糊黏度间的关系。应用Brabender连续黏度计对渗透压处理交联木薯淀粉进行了测定。当氯化钠作为交联反应渗透压促进剂时,随渗透压增大,所得淀粉样品的起始糊化温度增加,峰值黏度和最终黏度减小;高渗透压时,凝沉值和崩解值都趋于0。而硫酸钠作渗透压促进剂时,随渗透压的增大,起始糊化温度变化不明显,峰值黏度先下降后缓慢下降,最终黏度先减后增(增加不显著),崩解值先增

  3. Effect of addition of different hydrocolloids on pasting, thermal, and rheological properties of cassava starch Efeito da adição de diferentes hidrocoloides sobre as propriedades de pasta, térmicas e reológicas do amido de mandioca

    Directory of Open Access Journals (Sweden)

    Tatiana Dias Leite

    2012-09-01

    Full Text Available Starches and gums are hydrocolloids frequently used in food systems to provide proper texture, moisture, and water mobility. Starch-gum interaction in food systems can change the starch granule swelling and its gelatinization and rheological properties. In this study, the effect of the addition of xanthan gum (XG, sodium carboxymethyl cellulose (SCMC, and carrageenan (CAR at the concentrations of the 0.15, 0.25, 0.35 and 0.45% (w/v on the pasting, thermal, and rheological properties of cassava starch was studied. The swelling power (SP and the scanning electron microscopy (SEM of the starch gels were also evaluated. The results obtained showed that xanthan gum (XG had a strong interaction with the cassava starch penetrating between starch granules causing increase in pasting viscosities, SP, storage and loss (G', and G", respectively modulus and reduction in the setback of the starch; sodium carboxymethyl cellulose (SCMC greatly increased the pasting viscosities, the SP, and the storage and loss (G', and G", respectively modulus of the starch-mixtures, mainly due to its greater capacity to hold water and not due to the interaction with cassava starch. Carrageenan (CAR did not change any of the starch properties since there was no interaction between this gum and cassava starch at the concentrations used.Amidos e gomas são hidrocoloides frequentemente usados em sistemas alimentícios com a finalidade de fornecer textura, umidade e mobilidade de água. A interação amido-goma em sistemas alimentícios pode alterar o inchamento do grânulo de amido e as suas propriedades de gelatinização e reológicas. Neste trabalho, o efeito da adição de goma xantana (GX, carboximetilcelulose sódica (CMC e carragena (CAR nas concentrações de 0,15, 0,25, 0,35 e 0,45% (p/v sobre as propriedades de pasta, térmicas e reológicas do amido de mandioca foi estudado. O Poder de inchamento (PI e a Microscopia Eletrônica de Varredura (MEV dos géis de amido tamb

  4. Characterization of starch nanoparticles

    Science.gov (United States)

    Szymońska, J.; Targosz-Korecka, M.; Krok, F.

    2009-01-01

    Nanomaterials already attract great interest because of their potential applications in technology, food science and medicine. Biomaterials are biodegradable and quite abundant in nature, so they are favoured over synthetic polymer based materials. Starch as a nontoxic, cheap and renewable raw material is particularly suitable for preparation of nanoparticles. In the paper, the structure and some physicochemical properties of potato and cassava starch particles of the size between 50 to 100 nm, obtained by mechanical treatment of native starch, were presented. We demonstrated, with the aim of the Scanning Electron Microscopy (SEM) and the non-contact Atomic Force Microscopy (nc-AFM), that the shape and dimensions of the obtained nanoparticles both potato and cassava starch fit the blocklets - previously proposed as basic structural features of native starch granules. This observation was supported by aqueous solubility and swelling power of the particles as well as their iodine binding capacity similar to those for amylopectin-type short branched polysaccharide species. Obtained results indicated that glycosidic bonds of the branch linkage points in the granule amorphous lamellae might be broken during the applied mechanical treatment. Thus the released amylopectin clusters could escape out of the granules. The starch nanoparticles, for their properties qualitatively different from those of native starch granules, could be utilized in new applications.

  5. Produção de snacks funcionais à base de farinha de soja e polvilho azedo Production of functional snacks from soybean flour and sour cassava starch

    Directory of Open Access Journals (Sweden)

    Magali Leonel

    2010-06-01

    Full Text Available Este trabalho teve por objetivo avaliar o efeito da temperatura de extrusão e da porcentagem de farinha de soja sobre a expansão (IE, o índice de absorção de água (IAA, o índice de solubilidade em água (ISA, a cor (L*, a* e b* e a dureza de biscoitos extrusados. O processo de extrusão seguiu o delineamento central composto rotacional para dois fatores, totalizando 11 tratamentos. Os resultados obtidos mostraram que a temperatura e a porcentagem de farinha de soja tiveram efeitos significativos sobre as propriedades físicas dos produtos. Nas condições intermediárias de temperatura e baixa porcentagem de farinha de soja (10%, é possível obter biscoitos funcionais de mandioca com elevada expansão, índices intermediários de absorção e solubilidade em água, cor clara e baixa dureza.This study aimed to evaluate the effect of the extrusion temperature and the percentage of soybean flour in mixes on the expansion index (EI, water absorption index (WAI, water solubility index(WSI; color (L *, a *, b * and hardness of extruded sour cassava snacks. The extrusion process followed the rotational central composite design for two factors, totalizing 11 treatments. The results showed that the extrusion temperature and percentage of soybean flour in mixes had significant effects on the physical properties of products. Under the conditions of intermediate temperature and low percentage of soybean meal is possible to obtain function cassava snacks with high expansion, intermediate index of absorption and solubility in water, light color and low hardness.

  6. Structural characterization of magnetic cassava-starch microspheres and their application in adsorption of lysozyme%木薯淀粉磁性微球的结构表征及其对溶菌酶的吸附性能

    Institute of Scientific and Technical Information of China (English)

    蓝平; 何日梅; 封余贤; 李庭龙; 熊根; 韦金峦; 梁佩珠; 廖安平

    2016-01-01

    The magnetic cassava starch microspheres have been prepared using Fe3O4 and cassava starch as starting materials. Fourier transform infrared spectrum,X-ray diffraction,thermal analyzer, scanning electron microscope,laser granulometer,and magnetic balance were used to characterize the product. The adsorption behavior of lysozyme on these microspheres was studied. The influence of magnetic microsphere dosage,solution pH,adsorption temperature and time on the adsorption efficiency was evaluated by single factor experiments. The results showed that magnetic starch microspheres contain 19.71% of Fe3O4,withD50 (median diameter) of 15.40µm,and magnetic susceptibility of 1.571×10−3cm3/g . When the dosage of microspheres was 1.25g,with solution pH value of 10,adsorption temperature of 25℃,adsorption time of 80min,the best adsorption efficiency of lysozyme on the microsphere was 84.67%. Based on the correlation coefficientR2,the adsorption rate can be better described by pseudo-second-order kinetics(R2=0.99997) than by pseudo-first-order kinetics (R2=0.99174),and the particle diffusion model(R2=0.69996).%磁性微球是高分子材料与磁性物质通过一定作用复合而成的一类具有特殊功能的磁性高分子微球。以木薯淀粉为原材料,复合共沉淀法制备的改性磁流体Fe3O4,采用两步法(化学交联法)制备木薯淀粉磁性微球。利用傅里叶变换红外光谱仪、X射线衍射仪、同步热分析仪、扫描电镜、激光粒度仪、磁天平等对其性能及结构进行表征并研究其对溶菌酶的吸附行为。通过单因素法考察磁性微球用量、溶液pH值、吸附温度、吸附时间对吸附率的影响,并采用准一级动力学模型和准二级动力学模型研究其吸附动力学。结果表明:制备的木薯淀粉磁性微球Fe3O4含量为19.71%,D50(中位径)为15.40µm,磁化率为1.571×10−3cm3/g,形貌规整;在微球用量为1.25g,溶液pH=10,吸附温度为25

  7. Functional properties of extruded nano composites based on cassava starch, polyvinyl alcohol and montmorillonite; Propriedades funcionais de nanocompositos extrusados de amido de mandioca, alcool polivinilico e montmorilonita

    Energy Technology Data Exchange (ETDEWEB)

    Debiagi, Flavia; Mali, Suzana [Departamento de Bioquimica e Biotecnologia, Universidade Estadual de Londrina, PR (Brazil)

    2011-07-01

    The objectives of this work were to produce expanded nano composites (foams) based on starch, PVA and sodium montmorillonite and characterize them according to their expansion index (EI), density, water absorption capacity (WSC), mechanical properties and X-ray diffraction. The nano composites were prepared in a single-screw extruder using different starch contents (97.6 - 55.2 g/100 g formulation), PVA (0 - 40 g/100 g formulation), unmodified nano clay - Closite - Na (0 - 4. 8 g/100 g formulation) and glycerol (20 g/100 g formulation) as plasticizer. The addition of montmorillonite and PVA resulted in an increase of EI and a decrease of density of the samples, and reduced WSC and increased the mechanical strength of the foams. Through the analysis of X-ray diffraction can be observed that the addition of montmorillonite led to production of intercalated nano composites in all samples. (author)

  8. Cloning and characterization of a tuberous root-specific promoter from cassava (Manihot esculenta Crantz)

    NARCIS (Netherlands)

    Koehorst-van Putten, H.J.J.; Wolters, A.M.A.; Pereira-Bertram, I.J.; Berg, H.; Krol, van der A.R.; Visser, R.G.F.

    2012-01-01

    In order to obtain a tuberous root-specific promoter to be used in the transformation of cassava, a 1,728 bp sequence containing the cassava granule-bound starch synthase (GBSSI) promoter was isolated. The sequence proved to contain light- and sugar-responsive cis elements. Part of this sequence (1,

  9. Promoting Cassava as an Industrial Crop in Ghana: Effects on Soil Fertility and Farming System Sustainability

    Directory of Open Access Journals (Sweden)

    S. Adjei-Nsiah

    2012-01-01

    Full Text Available Cassava is an important starchy staple crop in Ghana with per capita consumption of 152.9 kg/year. Besides being a staple food crop, cassava can be used as raw material for the production of industrial starch and ethanol. The potential of cassava as an industrial commercial crop has not been exploited to a large extent because of perceptions that cassava depletes soils. Recent finding from field studies in the forest/savannah transitional agroecological zone of Ghana indicates that when integrated in the cropping system as a form of rotation, cassava contributes significantly to maintenance of soil fertility, and thus large scale production of cassava for industrial use can contribute to poverty reduction in an environmentally responsive way. This paper discusses the role of cassava cultivation in soil fertility management and its implication for farming system sustainability and industrialization.

  10. Direct fermentation of gelatinized cassava starch to acetone, butanol, and ethanol using Clostridium acetobutylicum mutant obtained by atmospheric and room temperature plasma.

    Science.gov (United States)

    Li, Han-guang; Luo, Wei; Wang, Qiang; Yu, Xiao-bin

    2014-04-01

    The mutant strain designated as ART18, obtained from the wild-type strain Clostridium acetobutylicum PW12 treated by atmospheric and room temperature plasma, showed higher solvent tolerance and butanol production than that of the wild-type strain. The production of butanol was 11.3 ± 0.5 g/L, 31 % higher than that of the wild-type strain when it was used for acetone, butanol, and ethanol fermentation in P2 medium. Furthermore, the effects of cassava flour concentration, pH regulators, and vitamins on the ABE production were also investigated. The highest butanol production of 15.8 ± 0.8 g/L and butanol yield (0.31 g/g) were achieved after the above factors were optimized. When acetone, butanol, and ethanol fermentation by ART18 was carried out in a 15-L bioreactor, the butanol production, the productivity of butanol, and the total solvent were 16.3 ± 0.9, 0.19, and 0.28 g/L(/)h, respectively. These results indicate that ART18 is a promising industrial producer in ABE fermentation.

  11. Development Trend of Cassava Industry and Market Analysis in China%我国木薯产业的发展趋势与市场分析①

    Institute of Scientific and Technical Information of China (English)

    文玉萍

    2014-01-01

    Expatiating on domestic current progress in cassava planting, cassava starch (modified starch) and cassava alcohol, and prospects of their future development tendency.%对我国的木薯种植,木薯淀粉(变性淀粉),木薯酒精行业的发展现状进行阐述,展望其发展趋势。

  12. Preparation of indigestible pyrodextrins from different starch sources.

    Science.gov (United States)

    Laurentin, Alexander; Cárdenas, Marité; Ruales, Jenny; Pérez, Elevina; Tovar, Juscelino

    2003-08-27

    Starch-modifying processes, such as pyrodextrinization, are potential ways to alter the nutritional features of this polysaccharide. A widely used method for pyrodextrinizing maize starch was also applied to lentil, sorghum, cocoyam, sagu, and cassava starches, and the in vitro digestibility of the products was evaluated. Pyrodextrins were produced by heating starch at 140 degrees C for 3 h, with catalytic amounts of HCl. The enzymatically available starch content of all preparations decreased by 55-65% after modification. Thus, pyrodextrinization seems to be an effective way to produce indigestible glucans from different starches. Pyrodextrins obtained were complex mixtures of starch derivatives with a wide range of molecular weight as estimated by gel filtration chromatography. Both their molecular weight profiles and contents of indigestible fractions varied with starch source. Experiments with lentil and cassava starches showed that changing dextrinization conditions also affects the susceptibility to enzymatic hydrolysis of the product.

  13. Analysis of heterogeneity of Copia-like retrotransposons in the genome of cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Gbadegesin, Micheal A; Beeching, John R

    2011-12-20

    Retrotransposons are ubiquitous in eukaryotic genomes and now proving to be useful genetic tools for genetic diversity and phylogenetic analyses, especially in plants. In order to assess the diversity of Ty1/Copia-like retrotransposons of cassava, we used PCR primers anchored on the conserved domains of reverse transcriptases (RTs) to amplify cassava Ty1/Copia-like RT. The PCR product was cloned and sequenced. Sequences analysis of the clones revealed the presence of 69 families of Ty1/Copia-like retrotransposon in the genome of cassava. Comparative analyses of the predicted amino acid sequences of these clones with those of other plants showed that retroelements of this class are very heterogeneous in cassava. Cassava is widely grown for its edible roots in the tropical and subtropical regions of the world. Cassava roots, though poor in protein, are rich in starch (makes up about 80% of the dry matter), vitamin C, carotenes, calcium and potassium. It has a great commercial importance as a source of starch and starch based products. Realizing the importance of cassava, it stands out as a crop to benefit from biotechnology development. Heterogeneity of Mecops (Manihot esculenta copia-like Retrotransposons) showed that they may be useful for genetic diversity and phylogenetic analyses of cassava germplasm.

  14. Chemical, physical and morphometric properties of Peruvian carrot (Arracacia xanthorrhiza B.) starch.

    Science.gov (United States)

    Pérez, E E; Borneo, R; Melito, C G; Tovar, J

    1999-01-01

    Starch was isolated from Peruvian carrot (PC)--or arracacha--(Arraccacia xanthorrhiza B.) roots. Its chemical, physical, physicochemical and granular structural properties were compared to those of commercial cassava starch. Scanning electron microscopy revealed a granular size for PC starch ranging between 4 and 26 microns in diameter, with spherical and truncated-egg shapes. PC and cassava starches were similar regarding gross chemical composition and basic physical characteristics but differed in pasting properties, with PC starch showing lower breakdown and consistency indices. The two starches also showed different water absorption and solubility patterns.

  15. Cassava, yam, sweet potato and ñampi starch: functional properties and possible applications in the food industry. Harinas y almidones de yuca, ñame, camote y ñampí: propiedades funcionales y posibles aplicaciones en la industria alimentaria.

    Directory of Open Access Journals (Sweden)

    Pedro Vargas Aguilar

    2013-03-01

    Full Text Available A technical review was conducted to related physical and chemical properties of flours and starches from cassava, yams, taro and sweet potato. Amyloseamylopectin content, viscosity, nutritional value and fiber, were studied to relate them with starch functional properties. A relationship was obtained between amylose-amylopectin, viscosity and fiber content with the digestibility of those starches and the glycemic index values. The use of fermentation to enhance the nutritional value of these starches is known. Starch fermentation allows the production of gluten-free bread and energy drinks as an option to diversify products. It was also observed the relationship between the starch viscosity and the fat absorption in fried foods.Se realizó una revisión de las características fisicoquímicas de las harinas y almidones de yuca, ñame, ñampí y camote, tales como el contenido de amilosa-amilopectina, la viscosidad, el valor nutricional y la fibra, con el fin de relacionarlas con sus propiedades funcionales y técnico-funcionales. Se obtuvo una relación entre el contenido de amilosa-amilopectina, viscosidad y contenido de fibra en la digestibilidad de estos almidones y los valores de índice glicémico. Se encontró que es posible introducir modificaciones por medio de la fermentación para mejorar el valor funcional de estos almidones. La fermentación permite elaborar pan sin gluten y bebidas energéticas como nuevas opciones de productos. También se encontró que existe una relación entre la viscosidad de los almidones y la disminución de absorción de la grasa en frituras.

  16. Thermal and pasting properties of cassava starch-dehydrated orange pulp blends Propriedades térmicas e de pasta de misturas de fécula de mandioca e polpa cítrica

    Directory of Open Access Journals (Sweden)

    Magali Leonel

    2011-06-01

    Full Text Available Instant mixtures are easy to prepare and frequently present functional appeals. A quality parameter for instant mixtures is their rheological behavior. This study aimed at evaluating the effects of extrusion parameters on the pasting properties of cassava (Manihot esculenta L. starch and dehydrated orange (Citrus sinensis (L. Osbeck pulp mixtures. The variable parameters were moisture of mixtures (12.5 to 19%, barrel temperature (40 to 90ºC and screw rotation (170 to 266 rpm. The extruded mixtures did not show gelatinization enthalpy. Moisture had the greatest effect on paste properties. The initial pasting viscosity (before heating of RVA (Rapid visco analyzer is the most relevant parameter to instant mixtures. The highest cold viscosity values were obtained when mixtures were extruded under high moisture and high screw speed. High moisture (19.5%, intermediate temperature (65ºC and screw speed (218 rpm led to extruded mixtures production with low component degradation.Misturas instantâneas apresentam-se como produtos de fácil preparo e muitas vezes com apelos funcionais. Um parâmetro de qualidade nestas misturas é o comportamento reológico. Avaliou-se o efeito de parâmetros de extrusão sobre as propriedades de pasta de misturas de fécula de mandioca (Manihot esculenta L. e polpa de laranja (Citrus sinensis (L. Osbeck desidratada. A umidade das misturas (12.5 a 19%, a temperatura de extrusão (40 a 90ºC e a rotação da rosca (170 a 266 rpm foram considerados parâmetros variáveis. As misturas extrusadas não apresentaram entalpia de gelatinização. A umidade foi o fator de maior efeito sobre as propriedades de pasta. A viscosidade inicial (antes do aquecimento no RVA (Rapid visco analyzer é um dos parâmetros mais importantes para misturas instantâneas. Nas condições de elevada umidade e rotação da rosca são observadas as maiores viscosidades a frio. Condições de elevada umidade das misturas (19,5%, temperatura (65ºC e

  17. Physical properties of snacks made from cassava leaf flour

    Directory of Open Access Journals (Sweden)

    Adriana Cristina Ferrari

    2014-02-01

    Full Text Available The food industry is continually growing with new products becoming available every year. Extrusion combines a number of unit operations in one energy efficient rapid continuous process and can be used to produce a wide variety of snacks foods. The objective of this study was to evaluate the effect of extrusion temperature, screw speed, and amount of cassava leaf flour mixed with cassava starch on the physical properties of extruded snacks processed using a single screw extruder. A central composite rotational design, including three factors with 20 treatments, was used in the experimental design. Dependent variables included the expansion index, specific volume, color, water absorption index, and water solubility index. Among the parameters examined, the amount of cassava leaf flour and extrusion temperature showed significant effects on extruded snack characteristics. Mixtures containing 10% of cassava leaf flour extruded at 100°C and 255 rpm shows favorable levels of expansion, color, water absorption index, and water solubility index.

  18. CHARACTERISATION OF CASSAVA FIBRE FOR USE AS A BIOMATERIAL

    Directory of Open Access Journals (Sweden)

    Lois Larbie

    2012-07-01

    Full Text Available In this study we investigate the cytotoxicity of de-starched cassava fibre granules and fine powder using human peripheral blood mononuclear cells (PBMC and examine changes in the composition of Simulated Body Fluid (SBF resulting from immersion of cassava fibre samples. The purpose of the study was to characterise cassavafibre for possible biomaterial applications. Preliminary results indicate insignificant cytotoxic effects on PBMCs with cassava sample concentrations of 0.1g/ml, 0.025g/ml and 0.00625g/ml. Additionally there was little or no significant change in Na, K, Mg, Cl, Ca, Mn, and Cu concentrations upon immersion in SBF as observed over a one week period at a temperature of 37°C. These initial results suggest cassava fibre may be considered for biomaterial applications following more extensive characterisation.

  19. Desenvolvimento e avaliação da eficácia de filmes biodegradáveis de amido de mandioca com nanocelulose como reforço e com extrato de erva-mate como aditivo antioxidante Development and evaluation of the effectiveness of biodegradable films of cassava starch with nanocelulose as reinforcement and yerba mate extract as an additive antioxidant

    Directory of Open Access Journals (Sweden)

    Bruna Aparecida Souza Machado

    2012-11-01

    Full Text Available O objetivo do trabalho foi desenvolver uma embalagem biodegradável utilizando como matriz polimérica o amido de mandioca plastificada com glicerol e reforçada com a incorporação de nanocelulose da fibra de coco, bem como, avaliar o efeito da adição de um aditivo natural (erva-mate nas formulações de nanobiocompósitos com ação antioxidante. Os nanocristais de celulose (L/D=39 foram obtidos por hidrólise ácida com H2SO4 a 65%. Os filmes foram preparados por casting contendo 4,5 e 6,0% de amido, 0,5 e 1,5% de glicerol, 0,3% de nanocelulose e 20% de extrato de erva-mate. O armazenamento do azeite de dendê embalado com os filmes contendo o aditivo foi monitorado por 40 dias sob condições de oxidação acelerada (63%UR/30°C. Constatou-se que, à medida que aumentam as perdas de Polifenóis Totais nos filmes, ocorre um menor aumento do Índice de Peróxidos do produto embalado, demonstrando, assim, que, ao invés do produto, os compostos da embalagem é quem estão sofrendo oxidação. A incorporação de extrato de erva-mate não alterou as propriedades mecânicas e de barreira desses filmes.The objective was to develop biodegradable packaging using a polymer matrix as the cassava starch plasticized with glycerol and reinforced with the incorporation of nanocelulose of coconut fiber, as well as to evaluate the effect of the addition of an additive nature (yerba mate in nanobiocompósitos formulations with antioxidant action. The nanocrystal cellulose (L/D=39 were obtained by acid hydrolysis with 65% H2SO4. The films were prepared by casting containing 4.5 and 6.0% starch, 0.5 and 1.5% glycerol, 0.3% nanocelulose and 20% extract of yerba mate. The palm oil storage packed with films containing the additive was monitored for 40 days under conditions of accelerated oxidation (63%UR/30°C. It was found that as the losses increase polyphenol films, there is a smaller increase of the peroxide value of the packaged product, thus

  20. Efeito de fibras vegetais nas propriedades de compósitos biodegradáveis de amido de mandioca produzidos via extrusão Effects of vegetal fibers on properties of cassava starch biodegradable composites produced by extrusion

    Directory of Open Access Journals (Sweden)

    Flávia Debiagi

    2010-12-01

    Full Text Available A preocupação com o volume de lixo tem gerado interesse no desenvolvimento de embalagens biodegradáveis capazes de substituir, ao menos em parte, os plásticos convencionais sintéticos, como é o caso das embalagens de poliestireno expandido (Isopor. Ojvetivou-se,neste trabalho caracterizar, quanto ao índice de expansão (IE, densidade, índice de absorção em água (IAA, índice de solubilidade em água (ISA e cor (coordenadas L*, a* e b*, compósitos biodegradáveis expandidos produzidos via extrusão, a partir da mistura de amido de mandioca, glicerol (plastificante e dois tipos de fibras vegetais. Os compósitos foram preparados em extrusora mono-rosca, com três diferentes teores de fibras de aveia ou de cana-de-açúcar (0, 5 e 10 g/100 g amido, dois teores de umidade (18 e 26% e teor fixo de glicerol (20g/100 g sólidos. A adição das fibras não afetou significativamente o IE, a densidade e o IAA, porém diminuiu o ISA dos materiais, o que é uma vantagem, favorecendo a utilização das fibras no reforço dos compósitos. A adição de fibras levou ao escurecimento das amostras, com decréscimo da luminosidade (L* e, ainda, ao aumento nos valores dos parâmetros de cor a* e b*. Este estudo é passo fundamental para produção em escala industrial dos compósitos, que necessitam de condições de processo que forneçam resultados reprodutíveis de expansão e capacidade de absorção e solubilidade em água, propriedades de grande importância nesses produtos.The concern with the volume of waste has generated interest in the development of biodegradable packaging able to replace, at least in part, the conventional synthetic plastics, such as packs of expanded polystyrene (Isopor. This study aimed to characterize the expansion index, density, the water absorption index (WAI, water solubility index (WSI and color (coordinates L*, a* and b* of expanded biodegradable composites produced by extrusion, from the mixture cassava starch

  1. Process for producing cassava hydroxypropyl distarch phosphate and study of the properties

    Institute of Scientific and Technical Information of China (English)

    邵亚东; 王艳楠; 刘大伟; 刘晓成

    2014-01-01

    In the experiment, the nature cassava starch reacted with 1,2-epoxypropane and sodium trimetaphosphate under basic condition to producing hydroxypropyl distarch phosphate.At same time ,prepared to researching characteristics of the starch, including the substitution degree, gelatinization temperature and peak viscosity.

  2. Effect of incorporation of nutraceutical capsule waste of safflower oil in the mechanical characteristics of corn starch films

    Directory of Open Access Journals (Sweden)

    Camila de CAMPO

    2016-01-01

    Full Text Available Abstract Biodegradable films blends made of safflower oil nutraceutical capsules waste corn starch (20:4, 30:4, 40:4 and 50:4 were prepared. The objective of this study was to evaluate the influence of addition of different concentrations of safflower oil nutraceutical capsule waste in the mechanical properties (tensile strength, elongation at break, Young’s modulus and thickness of corn starch films. A decrease in tensile strength and Young’s modulus and an increase in elongation at break were observed with the increase in the content of the nutraceutical capsule waste. The results showed that the blends of safflower oil capsules waste-corn starch films demonstrated promising characteristics to form biodegradable films with different mechanical characteristics.

  3. Ocorrência do processo de fixação biológica de N2 atmosférico na fermentação de fécula de mandioca Biological fixation of atmospheric N2 in the initial phase of cassava starch fermentation

    Directory of Open Access Journals (Sweden)

    Luiz Ermindo Cavallet

    2006-09-01

    Full Text Available A fase inicial do processo de fermentação natural de fécula de mandioca apresenta a ocorrência de fermentação vigorosa em apenas 24 h, mesmo com o meio tendo uma relação carbono/nitrogênio muito alta. Assim, o nitrogênio necessário à formação da biomassa nos primeiros estágios da fermentação seria originário de fora do sistema via fixação biológica de N2 atmosférico, já que o teor protéico disponível na fécula de mandioca é muito baixo. Para verificar tal hipótese, foram feitos dois experimentos fundamentados no balanço de nitrogênio na suspensão com grânulos de fécula durante as primeiras 120 h do processo fermentativo, conduzido sob temperatura ambiente e sob temperatura controlada a 28 °C. Não foram detectados aumentos de nitrogênio na fase estudada, o que sugere a não existência do processo de fixação biológica de N2 atmosférico. Os resultados sugerem que a origem do nitrogênio para o processo fermentativo é a própria fécula, que, quando na forma de polvilho apresenta alta relação C/N, porém, quando em suspensão essa relação abaixa propiciando uma fermentação vigorosa em apenas 24 h.The initial phase of natural fermentation of cassava starch presents vigorous fermentation within the first 24 h and is characterized by a high ration of carbon/nitrogen. Consequently, the necessary nitrogen to the formation of biomass would be originated from outside of the system because the available protein content from cassava starch is very low and depending on biological fixation of atmospheric N2. To verify that hypothesis two essays were conducted with the nitrogen balance in the starch granule suspension during the initial 120 h of the fermentation process. The essays were set at room temperature and at the controlled temperature of 28 °C. No increase in the nitrogen content was detected suggesting that no involvement of atmospheric N2. Results suggest that the origin of the nitrogen to the

  4. Efeito do teor de água, amilose, amilopectina e grau de gelatinização no crescimento do biscoito de amido de mandioca obtido por fermentação natural Effect of the water, amylose, amylopectin contents and the degree of gelatinization on the sour cassava (Manihot sculenta, K. starch biscuit growth

    Directory of Open Access Journals (Sweden)

    Claudio Ernani MENDES DA SILVA

    1998-04-01

    Full Text Available O amido de mandioca, assim como o amido de araruta, modificado por fermentação natural, quando formulado com água, sal e gordura vegetal hidrogenada para produzir o biscoito de "polvilho azedo", tem a propriedade de se expandir durante a cocção, como se nessa formulação existisse um agente aerante. O produto final obtido, tem uma estrutura alveolar, crocante e de baixa densidade. Pouco se conhece a respeito do mecanismo que envolve essa expansão e sobre os fatores que interferem na mesma. No presente trabalho, investigamos a influência do teor de água, o efeito da pré-gelatinização do amido fermentado e a adição de amilose e de amilopectina no crescimento do biscoito. O tempo de formação do biscoito, demonstrou ser altamente dependente do teor de água presente na sua formulação. A gelatinização total do amido modificado por fermentação, parece destruir completamente suas propriedades de expansão, pois não foi observado crescimento do biscoito com uma formulação padrão contendo apenas amido totalmente gelatinizado. Biscoitos formulados com amilose ou amilopectina em substituição ao amido fermentado, apresentaram baixo grau de expansão quando comparados ao padrão.The sour cassava starch (and also ararut starch is unique in the ability to produce a biscuit (made of water, shortening and salt that oven springs during baking as if it has in its formulation a leavening agent. The final product has an alveolar structure, it is crocant and low density. The fators that control its growth are unknown. In this paper were investigated the effects of the water, pregelatinized sour cassava starch, amylose and amylopectin contents on the biscuit growth. It has been showed that the time of formation of the biscuit structure depends on the water formulation content. The complete gelatinization of this starch seems to destroy its unique property to grow with heat as if it had a leavening agent in its formulation. Biscuits made of

  5. Modification of water absorption capacity of a plastic based on bean protein using gamma irradiated starches as additives

    Energy Technology Data Exchange (ETDEWEB)

    Koeber, E. [Facultad de Ingenieria, Grupo de Ingenieria Bioquimica, Universidad de Buenos Aires, Paseo Colon 850, 1063, Buenos Aires (Argentina); Gonzalez, M.E. [Comision Nacional Energia Atomica, Av. Del Libertador 8250, Buenos Aires (Argentina); Gavioli, N. [Facultad de Ingenieria, Grupo de Ingenieria Bioquimica, Universidad de Buenos Aires, Paseo Colon 850, 1063, Buenos Aires (Argentina); Salmoral, E.M. [Facultad de Ingenieria, Grupo de Ingenieria Bioquimica, Universidad de Buenos Aires, Paseo Colon 850, 1063, Buenos Aires (Argentina)]. E-mail: esalmor@fi.uba.ar

    2007-01-15

    Some properties of a bean protein-starch plastic were modified by irradiation of the starch. Two kinds of starch from bean and cassava were irradiated with doses until 50 kGy before their inclusion in the composite. Water absorption of the resultant product was reduced by 36% and 60% in materials containing bean and cassava starch, respectively. A large decline in the elongation is observed till 10 kGy in both materials, while tensile strength diminished by 11% in the cassava composite.

  6. Changes in the Functional Properties of Three Starches by Interaction with Lima Bean Proteins

    Directory of Open Access Journals (Sweden)

    Alejandra Huerta-Abrego

    2010-01-01

    Full Text Available The functional properties of starches determine their potential applications in food systems. These properties depend largely on granular and molecular structure and can be physically, chemically or enzymatically modified. One way of modifying starch functional properties is by interaction with other food components, such as proteins. Starch-protein interactions are frequent in plant foods, particularly cereals and legumes, which are formed mainly of starches and proteins. An evaluation has been done of changes in the functional properties of three native starches (corn, Zea mays L.; cassava, Manihot esculenta; and lima bean, Phaseolus lunatus L. when blended with lima bean protein concentrate. The gelatinization temperature of each blend increased compared to its corresponding native starch. The cassava starch/lima bean protein blend had the highest overall swelling power and water absorption capacity values at all temperatures. Maximum viscosity for each blend was higher than for the corresponding native starches. The blends of lima bean protein with cassava and corn starches did not exhibit syneresis. The lima bean starch/lima bean protein blend had the highest gel firmness values, followed by the blends with corn and cassava starches. The protein-starch mixtures are an alternative in the improvement of the starch functional properties which are useful in the development of nutritional products.

  7. Produção de biscoitos extrusados de polvilho azedo com fibras: efeito de parâmetros operacionais sobre as propriedades físicas Production of snacks from sour cassava starch and fiber: effect of operational parameters on physical properties

    Directory of Open Access Journals (Sweden)

    Karina Fernandes de Camargo

    2008-09-01

    Full Text Available Neste trabalho buscou-se avaliar o efeito de parâmetros operacionais do processo de extrusão no desenvolvimento de biscoitos de polvilho com fibras, utilizando como matérias-primas o polvilho azedo e o farelo de mandioca. O processamento foi realizado em um extrusor mono-rosca, sendo considerados parâmetros variáveis: temperatura na 3ª zona de extrusão, umidade e porcentagem de fibras na mistura. Para analisar o efeito combinado das variáveis independentes nas características tecnológicas dos extrusados, utilizou-se o delineamento 'central composto rotacional' para três fatores. Os resultados obtidos mostraram efeitos significativos da umidade e porcentagem de fibras sobre o volume específico, sendo que a temperatura afetou os índices de solubilidade e absorção de água dos produtos extrusados. Condições de baixa temperatura (65 °C, baixa umidade (12% e baixo teor de fibras (The purpose of this work was to evaluate the effect of operational extrusion parameters on the production of cassava fiber snacks from sour cassava starch and cassava bagasse. Processing was carried out in a single-screw extruder, with temperature in the third extrusion zone, moisture and fiber percentage as independent variables. In order to evaluate the effect of the independent variables on technological characteristics of the snacks, a central composite design with three factors was used. The results showed significant effects of moisture and fiber percentage on specific volume, and extrusion temperature had effects on Water Solubility Index (WSI and Water Absorption Index (WAI. Products with good technological characteristics can be produced at low temperature (65 °C, low fiber (<4% and low moisture (12% conditions.

  8. Levels of replacing corn by cassava starch on performance and carcass characteristics of bulls finished in feedlot / Substituição do milho pelo resíduo da fecularia de mandioca no desempenho e nas características de carcaça de bovinos terminados em confinamento

    Directory of Open Access Journals (Sweden)

    Liandra Maria Abaker Bertipaglia

    2010-07-01

    Full Text Available This work was carried out to study the effects of replacing corn by different levels of cassava starch (0; 12.5; 22.8 and 32.7% on performance and carcass characteristics of bulls finished in feedlot. Thirtytwo crossbred bulls (½ Aberdeen Angus vs. ½ Nellore with 18 months old and 380 + 24 kg live weight were used in a completely randomized experimental design with four treatments and eight replications. The experiment was realized during 56 days with 14 days for adaptation. The complete diets [roughage (cottonseed hulls + concentrate (corn, soybean meal and cassava starch] were given at 8 am and at 4 pm to bulls. It was analyzed the initial weight (IW, final weight (FW, average daily gain (ADG, dry matter intake (DMI, feed conversion (FC, hot carcass dressing (HCD, fat thickness (FAT, Longissimus muscle area (LMA, leg length (LL and cushion thickness (CT. The IW, FW, ADG, FC, HCW, HCD, FT, LMA, LL and CT did not present difference (P > 0.05 among levels of replacing corn by cassava starch. The results obtained on performance and carcass traits using cassava starch by-products as a replacement for corn can be considered satisfactory.Objetivou-se com este trabalho avaliar o efeito do nível de substituição (0; 12,5; 22,8 e 32,7% do milho pelo resíduo de fecularia de mandioca sobre o desempenho e características de carcaça de bovinos em confinamento. Trinta e dois machos inteiros mestiços (½ Aberdeen Angus vs. ½ Nelore com 18 meses de idade e 380 + 24 kg de peso vivo foram utilizados em delineamento experimental inteiramente casualizado, com quatro tratamentos e oito repetições. O experimento foi desenvolvido durante 56 dias com 14 dias de adaptação. As rações completas [volumoso (casca de algodão + concentrado (milho, farelo de soja e resíduo desidratado de fecularia de mandioca] foram fornecidas às 8 h e 16 h aos animais. Foi analisado o peso inicial (PI, peso final (PF ganho médio diário (GMD, ingestão de matéria seca

  9. Production of a raw starch saccharifying amylase byBacillus alvei grown on different agricultural substrates.

    Science.gov (United States)

    Achi, O K; Nijoku-Obi, A N

    1992-03-01

    Maximum activity of the amylase ofBacillus alvei was attained after growth of the organism on sorghum starch. Rice, corn, yam, cassava and potato starch gave high enzyme activities as did soluble starch. Glucose, maltose and glycerol were less effective. Optimum conditions for both growth and enzyme production were pH 6.8 at 40°C.

  10. 新型环保木薯淀粉改性聚氨酯硬质泡沫塑料的制备及性能研究%Study on Preparation and Properties of New Environmental Friendly Cassava Starch Modified Polyurethane Foams

    Institute of Scientific and Technical Information of China (English)

    石骥; 黄科林; 王犇; 杨波; 张雪旺; 慕朝师; 孙果宋; 罗素娟

    2011-01-01

    [ Objective ] Starch modified polyurethane foam was prepared from cassava starch and sucrose and the effect of reaction conditions on product properties were studied. [ Method ] The structure and thermal stability of products were analyzed based on FT - IR, SEM, DSC and TG.Moreover,the soil burying method was used to investigate the degradability of products. [ Result] Cross - linking reaction was involved in the preparation process of products. The increasing of starch content caused the acceleration of degradation rate and the greater degree of degradation. [ Conclusion] The starch modified polyurethane foam,which has good thermal stability,low thermal conductivity and excellent biodegradability,which can be used as environmental friendly thermal insulation materials.%[目的]以木薯淀粉和蔗糖为起始原料制备淀粉改性聚氨酯泡沫塑料,研究反应条件对产品性能的影响.[方法]用FT-IR、SEM、DSC和TG分析产品的结构及热稳定性,通过土埋试验考察产品的降解性能.[结果]淀粉在聚氨酯的制备过程中参与交联反应,随着淀粉含量的增加,产品的降解速度有所加快,且降解的程度也越大.[结论]淀粉改性聚氨酯泡沫具有良好的热稳定性、较低的导热系数和优异的生物降解性能,可以作为环保的保温材料使用.

  11. Raman Spectroscopic Profile of Ethanol Fermentation in High Gravity Cassava Starch Brewing%浓醪乙醇发酵的单细胞拉曼光谱表征

    Institute of Scientific and Technical Information of China (English)

    李自达; 赖钧灼; 廖威; 刘军贤; 王桂文

    2012-01-01

    应用激光镊子拉曼光谱技术收集500 L发酵罐中木薯淀粉浓醪乙醇发酵过程底物、产物及酵母单细胞的拉曼光谱,以期从单细胞水平为乙醇发酵提供新的认识.结果显示:1)拉曼光谱可以实时监测浓醪乙醇发酵过程底物与产物的变化;2)酵母细胞胞内物质的变化存在类似于产物变化的前发酵期、主发酵期和后发酵期3个阶段,但出现的时间要比产物变化晚约4 h;3)为适应浓醪发酵环境,酵母细胞的生理状态和胞内物质在不断地进行调整,随着环境乙醇浓度的升高,酵母细胞在胞内累积蛋白质和脂类物质,蛋白质二级结构逐渐变为以无规则卷曲为主;4)发酵后期,酵母细胞在胞内累积大量的嘌呤类物质,但细胞间含量存在异质性.上述结果表明,单细胞拉曼光谱技术提供了一种研究微生物发酵的新方法,可从新的角度获知乙醇发酵过程酵母细胞内外的变化信息.%Raman spectroscopy is used to characterize the process of ethanol fermentation and look into the Saccharomyces cerevisiae cells at single-cell level. The ethanol fermentation using high-concentration cassava starch as feedstock is processed in a 500 L fermentor and the Raman spectra of substrate, product and individual yeast cell are acquired by using laser tweezers Raman spectroscopy (LTRS). Major results are as follows: 1) Raman spectroscopy can monitor the dynamic changes of substrate and product during the ethanol fermentation; 2) the changes of intracellular components of yeast cells exhibit three stages, I. E., primary fermentation, main fermentation and later fermentation, which are similar to those of products, but there is a delay of about 4 hi 3) yeast cells amend its physiological state and intracellular compounds to adapt to the high osmotic stress at the initial stage and the high ethanol concentration at the later stage of fermentation. Random coiling dominates the secondary structure of

  12. Cassava root membrane proteome reveals activities during storage root maturation.

    Science.gov (United States)

    Naconsie, Maliwan; Lertpanyasampatha, Manassawe; Viboonjun, Unchera; Netrphan, Supatcharee; Kuwano, Masayoshi; Ogasawara, Naotake; Narangajavana, Jarunya

    2016-01-01

    Cassava (Manihot esculenta Crantz) is one of the most important crops of Thailand. Its storage roots are used as food, feed, starch production, and be the important source for biofuel and biodegradable plastic production. Despite the importance of cassava storage roots, little is known about the mechanisms involved in their formation. This present study has focused on comparison of the expression profiles of cassava root proteome at various developmental stages using two-dimensional gel electrophoresis and LC-MS/MS. Based on an anatomical study using Toluidine Blue, the secondary growth was confirmed to be essential during the development of cassava storage root. To investigate biochemical processes occurring during storage root maturation, soluble and membrane proteins were isolated from storage roots harvested from 3-, 6-, 9-, and 12-month-old cassava plants. The proteins with differential expression pattern were analysed and identified to be associated with 8 functional groups: protein folding and degradation, energy, metabolism, secondary metabolism, stress response, transport facilitation, cytoskeleton, and unclassified function. The expression profiling of membrane proteins revealed the proteins involved in protein folding and degradation, energy, and cell structure were highly expressed during early stages of development. Integration of these data along with the information available in genome and transcriptome databases is critical to expand knowledge obtained solely from the field of proteomics. Possible role of identified proteins were discussed in relation with the activities during storage root maturation in cassava.

  13. Production of ethanol from cassava pulp via fermentation with a surface-engineered yeast strain displaying glucoamylase

    Energy Technology Data Exchange (ETDEWEB)

    Kosugi, Akihiko; Murata, Yoshinori; Arai, Takamitsu; Mori, Yutaka [Post-harvest Science and Technology Division, Japan International Research Center for Agricultural Sciences (JIRCAS), 1-1 Ohwashi, Tsukuba, Ibaraki 305-8686 (Japan); Kondo, Akihiko [Department of Chemical Science and Engineering, Faculty of Engineering, Kobe University, Nada-ku, Kobe, 657-8501 (Japan); Ueda, Mitsuyoshi [Department of Applied Biochemistry, Division of Applied Life Sciences, Graduate School of Agriculture, Kyoto University, Sakyo-ku, Kyoto 606-8502 (Japan); Vaithanomsat, Pilanee; Thanapase, Warunee [Nanotechnology and Biotechnology Division, Kasetsart Agricultural and Agro-Industrial Product Improvement Institute (KAPI), Kasetsart University, 50 Chatuchak, Ladyao, Bangkok 10900 (Thailand)

    2009-05-15

    Cassava (Manihot esculenta Crantz) pulp, produced in large amounts as a by-product of starch manufacturing, is a major biomass resource in Southeast Asian countries. It contains abundant starch (approximately 60%) and cellulose fiber (approximately 20%). To effectively utilize the cassava pulp, an attempt was made to convert its components to ethanol using a sake-brewing yeast displaying glucoamylase on the cell surface. Saccharomyces cerevisiae Kyokai no. 7 (strain K7) displaying Rhizopus oryzae glucoamylase, designated strain K7G, was constructed using the C-terminal-half region of {alpha}-agglutinin. A sample of cassava pulp was pretreated with a hydrothermal reaction (140 C for 1 h), followed by treatment with a Trichoderma reesei cellulase to hydrolyze the cellulose in the sample. The K7G strain fermented starch and glucose in pretreated samples without addition of amylolytic enzymes, and produced ethanol in 91% and 80% of theoretical yield from 5% and 10% cassava pulp, respectively. (author)

  14. Biorefinery approach for cassava-based industrial wastes: Current status and opportunities.

    Science.gov (United States)

    Zhang, Ming; Xie, Li; Yin, Zhixuan; Khanal, Samir Kumar; Zhou, Qi

    2016-09-01

    Cassava, an important food crop, has been extensively employed as raw materials for various agri-industries to produce starch, bioethanol and other biobased products/chemicals. These cassava-based industries also generate large quantities of wastes/residues, rich in organic matter and suspended solids, and pose significant environmental issues. Their complex biochemical composition with high organic content endows them with a great potential for bioconversion into value-added products via biorefinery thereby providing economic and environmental sustainability to cassava industries. This state-of-the-art review covers the source, composition and characteristics of cassava industrial wastes and residues, and their bioconversion into value-added products, mainly biofuels (ethanol and butanol), biogas, biosurfactant, organic acids and other valuable biochemicals among others. This paper also outlines future perspectives with respect to developing more effective and efficient bioconversion processes for converting the cassava wastes and residues into high-value products. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Physicochemical characterization of starches from seven improved ...

    African Journals Online (AJOL)

    SARAH

    2014-01-31

    Jan 31, 2014 ... textiles thanks to their interesting physicochemical and functional properties. Key words: .... showed the same profile of Gaussian curve, with a peak at 80 °C for .... molecular weight of the amylose fraction in cassava starches ...

  16. Cassava Pulp as a Biofuel Feedstock of an Enzymatic Hydrolysis Proces

    Directory of Open Access Journals (Sweden)

    Djuma’ali Djuma’ali

    2013-03-01

    Full Text Available Cassava pulp, a low cost solid byproduct of cassava starch industry, has been proposed as a high potential ethanolic fermentation substrate due to its high residual starch level, low ash content and small particle size of the lignocellulosic fibers. As the economic feasibility depends on complete degradation of the polysaccharides to fermentable glucose, the comparative hydrolytic potential of cassava pulp by six commercial enzymes were studied. Raw cassava pulp (12% w/v, particle size <320 μm hydrolyzed by both commercial pectinolytic (1 and amylolytic (2 enzymes cocktail, yielded 70.06% DE. Hydrothermal treatment of cassava pulp enhanced its susceptibility to enzymatic cleavageas compared to non-hydrothermal treatment raw cassava pulp. Hydrothermal pretreatment has shown that a glucoamylase (3 was the most effective enzyme for hydrolysis process of cassava pulp at temperature 65 °C or 95 °C for 10 min and yielded approximately 86.22% and 90.18% DE, respectively. Enzymatic pretreatment increased cassava pulp vulnerability to cellulase attacks. The optimum conditions for enzymatic pretreatment of 30% (w/v cassava pulp by a potent cellulolytic/ hemicellulolytic enzyme (4 was achieves at 50 °C for 3, meanwhile for liquefaction and saccharification by a thermo-stable α-amylase (5 was achieved at 95 °C for 1 and a glucoamylase (3 at 50 °C for 24 hours, respectively, yielded a reducing sugar level up to 94,1% DE. The high yield of glucose indicates the potential use of enzymatic-hydrothermally treated cassava pulp as a cheap substrate for ethanol production.

  17. Cassava as a food.

    Science.gov (United States)

    Okezie, B O; Kosikowski, F V

    1982-01-01

    This review has attempted to examine information pertaining to the role of cassava (Manihot esculenta) as a major food source for a large part of the world population, particularly the countries of South America, Africa, and Asia, where it is primarily a major source of energy for 300 to 500 million people. Its cultivation, usually on small farms with little technology, is estimated to cover on an annual basis about 11 million hectares providing about 105 million tons, more than half of which is consumed by humans. The importance of cassava as an energy source can be seen by its growing demand in the European economic community countries where it forms up to 60% of the balanced diets for swine. Cassava is one of the crops that converts the greatest amount of solar energy into soluble carbohydrates per unit of area, thus 1 kg of moisture-free cassava meal may yield up to about 3750 kcal which would mean that a yearly production of 15 tons of cassava meal per hectare would yield some 56 million kcal. The major limitations of cassava as food appear to be its poor protein content and quality and the rapid post harvest deterioration of its roots which usually prevents their storage in the fresh state for more than a few days. However, in addition to its use for culinary purposes, cassava finds application in industrial products such as an adhesive for laundry purposes, for manufacturing paper, alcohol, butanol, dextrin, adhesive tape, textile sizing, and glue.

  18. Direct ethanol production from cassava pulp using a surface-engineered yeast strain co-displaying two amylases, two cellulases, and {beta}-glucosidase

    Energy Technology Data Exchange (ETDEWEB)

    Apiwatanapiwat, Waraporn; Rugthaworn, Prapassorn [Japan International Research Center for Agricultural Sciences (JIRCAS), Tsukuba, Ibaraki (Japan). Post-Harvest Science and Technology Div.; Kasetsart Univ., Bangkok (Thailand). Nanotechnology and Biotechnology Div.; Murata, Yoshinori; Kosugi, Akihiko; Arai, Takamitsu; Mori, Yutaka [Japan International Research Center for Agricultural Sciences (JIRCAS), Tsukuba, Ibaraki (Japan). Post-Harvest Science and Technology Div.; Yamada, Ryosuke; Kondo, Akihiko [Kobe Univ. (Japan). Dept. of Chemical Science and Engineering

    2011-04-15

    In order to develop a method for producing fuel ethanol from cassava pulp using cell surface engineering (arming) technology, an arming yeast co-displaying {alpha}-amylase ({alpha}-AM), glucoamylase, endoglucanase, cellobiohydrase, and {beta}-glucosidase on the surface of the yeast cells was constructed. The novel yeast strain, possessing the activities of all enzymes, was able to produce ethanol directly from soluble starch, barley {beta}-glucan, and acid-treated Avicel. Cassava is a major crop in Southeast Asia and used mainly for starch production. In the starch manufacturing process, large amounts of solid wastes, called cassava pulp, are produced. The major components of cassava pulp are starch (approximately 60%) and cellulose fiber (approximately 30%). We attempted simultaneous saccharification and ethanol fermentation of cassava pulp with this arming yeast. During fermentation, ethanol concentration increased as the starch and cellulose fiber substrates contained in the cassava pulp decreased. The results clearly showed that the arming yeast was able to produce ethanol directly from cassava pulp without addition of any hydrolytic enzymes. (orig.)

  19. Physicochemical properties of maca starch.

    Science.gov (United States)

    Zhang, Ling; Li, Guantian; Wang, Sunan; Yao, Weirong; Zhu, Fan

    2017-03-01

    Maca (Lepidium meyenii Walpers) is gaining research attention due to its unique bioactive properties. Starch is a major component of maca roots, thus representing a novel starch source. In this study, the properties of three maca starches (yellow, purple and black) were compared with commercially maize, cassava, and potato starches. The starch granule sizes ranged from 9.0 to 9.6μm, and the granules were irregularly oval. All the maca starches presented B-type X-ray diffraction patterns, with the relative degree of crystallinity ranging from 22.2 to 24.3%. The apparent amylose contents ranged from 21.0 to 21.3%. The onset gelatinization temperatures ranged from 47.1 to 47.5°C as indicated by differential scanning calorimetry. Significant differences were observed in the pasting properties and textural parameters among all of the studied starches. These characteristics suggest the utility of native maca starch in products subjected to low temperatures during food processing and other industrial applications.

  20. Influence of the simultaneous addition of bentonite and cellulose fibers on the mechanical and barrier properties of starch composite-films.

    Science.gov (United States)

    de Moraes, J Oliveira; Müller, C M O; Laurindo, J B

    2012-02-01

    The addition of nanoclay or cellulose fibers has been presented in the literature as a suitable alternative for reinforcing starch films. The aim of the present work was to evaluate the effect of the simultaneous incorporation of nanoclay (bentonite) and cellulose fibers on the mechanical and water barrier properties of the resultant composite-films. Films were prepared by casting with 3% in weight of cassava starch, using glycerol as plasticizer (0.30 g per g of starch), cellulose fibers at a concentration of 0.30 g of fibers per g of starch and nanoclay (0.05 g clay per g starch and 0.10 g clay per g starch). The addition of cellulose fibers and nanoclay increased the tensile strength of the films 8.5 times and the Young modulus 24 times but reduced the elongation capacity 14 times. The water barrier properties of the composite-films to which bentonite and cellulose fibers were added were approximately 60% inferior to those of starch films. Diffractograms showed that the nanoclay was intercalated in the polymeric matrix. These results indicate that the simultaneous addition of bentonite and cellulose fibers is a suitable alternative to increase the tensile strength of the films and decrease their water vapor permeabilities.

  1. Sugarcane starch: quantitative determination and characterization

    Directory of Open Access Journals (Sweden)

    Joelise de Alencar Figueira

    2011-09-01

    Full Text Available Starch is found in sugarcane as a storage polysaccharide. Starch concentrations vary widely depending on the country, variety, developmental stage, and growth conditions. The purpose of this study was to determine the starch content in different varieties of sugarcane, between May and November 2007, and some characteristics of sugarcane starch such as structure and granules size; gelatinization temperature; starch solution filterability; and susceptibility to glucoamylase, pullulanase, and commercial bacterial and fungal α-amylase enzymes. Susceptibility to debranching amylolytic isoamylase enzyme from Flavobacterium sp. was also tested. Sugarcane starch had spherical shape with a diameter of 1-3 µm. Sugarcane starch formed complexes with iodine, which showed greater absorption in the range of 540 to 620 nm. Sugarcane starch showed higher susceptibility to glucoamylase compared to that of waxy maize, cassava, and potato starch. Sugarcane starch also showed susceptibility to debranching amylolytic pullulanases similar to that of waxy rice starch. It also showed susceptibility to α-amylase from Bacillus subtilis, Bacillus licheniformis, and Aspergillus oryzae similar to that of the other tested starches producing glucose, maltose, maltotriose, maltotetraose, maltopentose and limit α- dextrin.

  2. Effect of starch types on properties of biodegradable polymer based on thermoplastic starch process by injection molding technique

    Directory of Open Access Journals (Sweden)

    Yossathorn Tanetrungroj

    2015-04-01

    Full Text Available In this study effects of different starch types on the properties of biodegradable polymer based on thermoplastic starch (TPS were investigated. Different types of starch containing different contents of amylose and amylopectin were used, i.e. cassava starch, mungbean starch, and arrowroot starch. The TPS polymers were compounded and shaped using an internal mixer and an injection molding machine, respectively. It was found that the amount of amylose and amylopectin contents on native starch influence the properties of the TPS polymer. A high amylose starch of TPMS led to higher strength, hardness, degree of crystallization than the high amylopectin starch of TPCS. In addition, function group analysis by Fourier transforms infrared spectrophotometer, water absorption, and biodegradation by soil burial test were also examined.

  3. Direct fermentation of raw starch using a Kluyveromyces marxianus strain that expresses glucoamylase and alpha-amylase to produce ethanol.

    Science.gov (United States)

    Wang, Rongliang; Wang, Dongmei; Gao, Xiaolian; Hong, Jiong

    2014-01-01

    Raw starch and raw cassava tuber powder were directly and efficiently fermented at elevated temperatures to produce ethanol using the thermotolerant yeast Kluyveromyces marxianus that expresses α-amylase from Aspergillus oryzae as well as α-amylase and glucoamylase from Debaryomyces occidentalis. Among the constructed K. marxianus strains, YRL 009 had the highest efficiency in direct starch fermentation. Raw starch from corn, potato, cassava, or wheat can be fermented at temperatures higher than 40°C. At the optimal fermentation temperature 42°C, YRL 009 produced 66.52 g/L ethanol from 200 g/L cassava starch, which was the highest production among the selected raw starches. This production increased to 79.75 g/L ethanol with a 78.3% theoretical yield (with all cassava starch were consumed) from raw cassava starch at higher initial cell densities. Fermentation was also carried out at 45 and 48°C. By using 200 g/L raw cassava starch, 137.11 and 87.71 g/L sugar were consumed with 55.36 and 32.16 g/L ethanol produced, respectively. Furthermore, this strain could directly ferment 200 g/L nonsterile raw cassava tuber powder (containing 178.52 g/L cassava starch) without additional nutritional supplements to produce 69.73 g/L ethanol by consuming 166.07 g/L sugar at 42°C. YRL 009, which has consolidated bioprocessing ability, is the best strain for fermenting starches at elevated temperatures that has been reported to date.

  4. Cassava genome from a wild ancestor to cultivated varieties.

    Science.gov (United States)

    Wang, Wenquan; Feng, Binxiao; Xiao, Jingfa; Xia, Zhiqiang; Zhou, Xincheng; Li, Pinghua; Zhang, Weixiong; Wang, Ying; Møller, Birger Lindberg; Zhang, Peng; Luo, Ming-Cheng; Xiao, Gong; Liu, Jingxing; Yang, Jun; Chen, Songbi; Rabinowicz, Pablo D; Chen, Xin; Zhang, Hong-Bin; Ceballos, Henan; Lou, Qunfeng; Zou, Meiling; Carvalho, Luiz J C B; Zeng, Changying; Xia, Jing; Sun, Shixiang; Fu, Yuhua; Wang, Haiyan; Lu, Cheng; Ruan, Mengbin; Zhou, Shuigeng; Wu, Zhicheng; Liu, Hui; Kannangara, Rubini Maya; Jørgensen, Kirsten; Neale, Rebecca Louise; Bonde, Maya; Heinz, Nanna; Zhu, Wenli; Wang, Shujuan; Zhang, Yang; Pan, Kun; Wen, Mingfu; Ma, Ping-An; Li, Zhengxu; Hu, Meizhen; Liao, Wenbin; Hu, Wenbin; Zhang, Shengkui; Pei, Jinli; Guo, Anping; Guo, Jianchun; Zhang, Jiaming; Zhang, Zhengwen; Ye, Jianqiu; Ou, Wenjun; Ma, Yaqin; Liu, Xinyue; Tallon, Luke J; Galens, Kevin; Ott, Sandra; Huang, Jie; Xue, Jingjing; An, Feifei; Yao, Qingqun; Lu, Xiaojing; Fregene, Martin; López-Lavalle, L Augusto Becerra; Wu, Jiajie; You, Frank M; Chen, Meili; Hu, Songnian; Wu, Guojiang; Zhong, Silin; Ling, Peng; Chen, Yeyuan; Wang, Qinghuang; Liu, Guodao; Liu, Bin; Li, Kaimian; Peng, Ming

    2014-10-10

    Cassava is a major tropical food crop in the Euphorbiaceae family that has high carbohydrate production potential and adaptability to diverse environments. Here we present the draft genome sequences of a wild ancestor and a domesticated variety of cassava and comparative analyses with a partial inbred line. We identify 1,584 and 1,678 gene models specific to the wild and domesticated varieties, respectively, and discover high heterozygosity and millions of single-nucleotide variations. Our analyses reveal that genes involved in photosynthesis, starch accumulation and abiotic stresses have been positively selected, whereas those involved in cell wall biosynthesis and secondary metabolism, including cyanogenic glucoside formation, have been negatively selected in the cultivated varieties, reflecting the result of natural selection and domestication. Differences in microRNA genes and retrotransposon regulation could partly explain an increased carbon flux towards starch accumulation and reduced cyanogenic glucoside accumulation in domesticated cassava. These results may contribute to genetic improvement of cassava through better understanding of its biology.

  5. Elaboração de biscoitos de chocolate com substituição parcial da farinha de trigo por polvilho azedo e farinha de albedo de laranja Chocolate biscuits preparation with partial substitution of wheat flour by fermented cassava starch and orange albedo flour

    Directory of Open Access Journals (Sweden)

    Aline Alves Oliveira Santos

    2011-03-01

    Full Text Available Os consumidores estão cada vez mais exigentes e preocupados com a saúde e, por consequência, exigindo produtos naturais que deverão ser seguros e promover qualidade de vida. O presente trabalho teve o objetivo de desenvolver biscoitos com farinhas mistas de polvilho azedo e farinha de albedo de laranja, utilizando um planejamento fatorial 2³, com variáveis independentes: concentração de polvilho azedo, açúcar e farinha de albedo de laranja, e variáveis respostas: as características sensoriais: aparência, aroma, textura e sabor, além da impressão global, utilizando escala hedônica estruturada de nove pontos. Os biscoitos foram avaliados também quanto às características físico-químicas. As médias obtidas para as características sensoriais estiveram na faixa que vai de cinco (não gostei nem desgostei até sete (gostei moderadamente, não apresentando diferença significativa (P≤0,05 para todas as características sensoriais avaliadas. Dessa maneira, foi possível escolher a formulação ideal obtida de acordo com os parâmetros nutricionais, por não existir diferença sensorial significativa, que foi 35% de polvilho azedo, 100% de açúcar e 7,5% de farinha de albedo de laranja. No teste sensorial comparativo com os biscoitos comercial, padrão e otimizado, as características sensoriais aparência, sabor e textura apresentaram diferença significativa (P≤0,05. As características físico-químicas apresentaram resultados correspondentes aos padrões estabelecidos pela legislação brasileira, e o teor de fibra bruta do biscoito otimizado foi de 3,08%, assim, pode ser classificado como biscoito "fonte de fibras".The consumers are increasingly demanding and worried about health and, consequently, requiring natural products that should be safe and that promote life quality. The present research had the objective to develop biscuits with mixed flour of fermented cassava starch and orange albedo flour, using a 2³ factorial

  6. Synthesis of Rosin Acid Starch Catalyzed by Lipase

    Directory of Open Access Journals (Sweden)

    Rihui Lin

    2014-01-01

    Full Text Available Rosin, an abundant raw material from pine trees, was used as a starting material directly for the synthesis of rosin acid starch. The esterification reaction was catalyzed by lipase (Novozym 435 under mild conditions. Based on single factor experimentation, the optimal esterification conditions were obtained as follows: rosin acid/anhydrous glucose unit in the molar ratio 2 : 1, reaction time 4 h at 45°C, and 15% of lipase dosage. The degree of substitution (DS reaches 0.098. Product from esterification of cassava starch with rosin acid was confirmed by FTIR spectroscopy and iodine coloration analysis. Scanning electron microscopy and X-ray diffraction analysis showed that the morphology and crystallinity of the cassava starch were largely destroyed. Thermogravimetric analysis indicated that thermal stability of rosin acid starch decreased compared with native starch.

  7. TEKNOLOGI MODIFIKASI TEPUNG KASAVA Modified Cassava Flour Technology

    Directory of Open Access Journals (Sweden)

    Haryadi Haryadi

    2012-05-01

    Full Text Available Cassava productivity is very potential to support food security. Processing of cassava into flour makes the food more durable, less voluminous and easier to handle, and flexible to cook. To extend the use of cassava flour, it is necessary to develop technology to produce quality cassava flour suitable for various food purposes. A certain flour finess is desired to free the starch granules and to allow the granule’s cooking characteristics to express significantly. Modification of cassava flour technology may involve physical, biological, chemical aspects, as well as combination of the aspects. ABSTRAK Potensi produksi kasava sangat besar untuk dimanfaatkan sebagai pendukung ketahanan pangan. Pengolahannya men­ jadi tepung memungkinkan lebih awet, lebih ringkas dan lebih mudah diangkut, serta lebih luwes untuk diolah. Untuk memperluas penggunaan tepung kasava, perlu pengembangan teknologi produksi tepung bermutu yang dapat diman­ faatkan dalam berbagai olahan makanan. Tepung dikehendaki pada kelembutan tertentu, sehingga granula-granula pati terlepas dari jaringan awalnya, dan selanjutnya ciri-ciri granula dalam pemasakan menjadi nyata. Modifikasi pembuatan tepung kasava dapat dilakukan secara fisik, biologis maupun kimiawi, ataupun gabungan dari aspek-aspek tersebut.

  8. Awareness of Cassava Peel Utilization Forms among Cassava ...

    African Journals Online (AJOL)

    Awareness of Cassava Peel Utilization Forms among Cassava Processors in Rural ... Journal Home · ABOUT · Advanced Search · Current Issue · Archives ... sites in southwest, Nigeria thereby constituting a source of environmental pollution. ... to lack of awareness of cassava peel utilization technologies in the study areas.

  9. Structural characterization of Peruvian carrot (Arracacia xanthorrhiza) starch and the effect of annealing on its semicrystalline structure.

    Science.gov (United States)

    Rocha, Thais S; Cunha, Verena A G; Jane, Jay-Lin; Franco, Celia M L

    2011-04-27

    Structural characteristics of native and annealed Peruvian carrot (Arracacia xanthorrhiza) starches were determined and compared to those of cassava and potato starches. Peruvian carrot starch presented round and irregular shaped granules, low amylose content and B-type X-ray pattern. Amylopectin of this starch contained a large proportion of long (DP > 37) and short (DP 6-12) branched chains. These last ones may contribute to its low gelatinization temperature. After annealing, the gelatinization temperatures of all starches increased, but the ΔH and the crystallinity increased only in Peruvian carrot and potato starches. The annealing process promoted a higher exposure of Peruvian carrot amylose molecules, which were more quickly attacked by enzymes, whereas amylopectin molecules became more resistant to hydrolysis. Peruvian carrot starch had structural characteristics that differed from those of cassava and potato starches. Annealing affected the semicrystalline structure of this starch, enhancing its crystallinity, mainly due to a better interaction between amylopectin chains.

  10. Optimization of enzymatic hydrolysis of cassava to obtain fermentable sugars

    Institute of Scientific and Technical Information of China (English)

    Renata M. COLLARES; Luiza V. S. MIKLASEVICIUS; Mariana M. BASSACO; Nina P. G. SALAU; Marcio A. MAZUTTI; Dilson A. BISOGNIN; Lisiane M. TERRA

    2012-01-01

    This work evaluates the enzymatic hydrolysis of starch from cassava using pectinase,α-amylase,and amyloglucosidase.A central composite rotational design (CCRD) was carried out to evaluate the effects of amyloglucosidase,pectinase,reaction time,and solid to liquid ratio.All the experiments were carried out in a bioreactor with working volume of 2 L.Approximately 98% efficiency hydrolysis was obtained,resulting in a concentration of total reducing sugar released of 160 g/L.It was concluded that pectinase improved the hydrolysis of starch from cassava.Reaction time was found to be significant until 7 h of reaction.A solid to liquid ratio of 1.0 was considered suitable for hydrolysis of starch from cassava.Amyloglucosidase was a significant variable in the process:after its addition to the reaction media,a 30%-50% increase in the amount of total reducing sugar released was observed.At optimal conditions the maximum productivity obtained was 22.9 g/(L·h).

  11. Effect of adsorption of an inhibitory factor on raw starch hydrolysis by glucoamylase.

    Science.gov (United States)

    Towprayoon, S; Fujio, Y; Ueda, S

    1990-12-01

    An inhibitory factor (IF) produced byAspergillus niger strain 19, and which inhibits the action of glucoamylase on starch, has the ability to be tightly adsorbed on to various raw starches, though the amount differs from starch to starch. Based on the hydrolysis of the IF-starch complex by glucoamylase, the inhibitions per unit IF adsorbed are similar for some varieties of starch. The effectiveness ratio of IF (% hydrolysis inhibition per % IF adsorbed on raw starch) for corn, sweet potato, waxy rice and waxy corn starches are 1.1, 1.0, 0.85 and 0.96, respectively. These results support the hypothesis that both glucoamylase and IF are adsorbed on to a common binding site on raw starch. However, the effectiveness ratio of IF for cassava and wheat starches are 0.71 and 1.65, respectively, which differ significantly from other varieties of starch.

  12. Effect of Starch Sources on the Release Rates of Herbicides Encapsulated

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The effects of starch sources on the behaviors of starch matrices and on the rates of herbicides released from the matrices were studied for slow release. The starches considered include native corn starch, wheat starch, potato starch and cassava starch. The matrices were prepared through encapsulating 2,4-dichlorophenoxyacetic or 2,4,5-trichlorophenoxyacetic acids as model herbicides with hot-gelatinized starch pastes. The encapsulation was evaluated in terms of herbicide content, swellability, encapsulation efficiency, and release rate. The results show that starch sources play an important role on the matrix behaviors and on release rates. The rate of 2,4-D released follows the order: wheat starch < potato starch < corn starch < cassava starch. And for the rate of 2,4,5-T, this order is nearly the same only with an exception that the late two kinds of starch are similar. It is also demonstrated that herbicides with different water solubility show different release rates, no matter what type of starch is used as the matrices.

  13. MICROMORPHOLOGICAL STUDIES OF STARCH GRANULES IN SELECTED PROCESSED INDIGENOUS FLOUR OF SOUTH WESTERN NIGERIA

    Directory of Open Access Journals (Sweden)

    Adeniyi A. JAYEOLA

    2013-06-01

    Full Text Available Starch granules of yam stem tubers, plantain fruits and cassava root tubers were studied using the light microscope and then compared. Yam and plantain, both monocotyledons, had morphologically similar granules between locations, being mostly oval in shape while the granules of cassava, a dicot, were predominantly globular but varied between locations. Differences in processing methods between locations might be responsible for the observed variation in cassava granules. There is a suggestion that starch granule morphology might follow lineages in a broad sense. The unique micromorphology of cassava starch granule could make it easily detectable when adulterated, substituted or contaminated with yam or plantain granules and this could provide a cost effective clue in forensic determination.

  14. Starch poisoning

    Science.gov (United States)

    Cooking starch poisoning; Laundry starch poisoning ... Cooking and laundry starch are both made from vegetable products, most commonly: Corn Potatoes Rice Wheat Both are usually considered nonpoisonous (nontoxic), but ...

  15. Application of thermophilic enzymes and water jet system to cassava pulp.

    Science.gov (United States)

    Chaikaew, Siriporn; Maeno, Yuka; Visessanguan, Wonnop; Ogura, Kota; Sugino, Gaku; Lee, Seung-Hwan; Ishikawa, Kazuhiko

    2012-12-01

    Co-production of fermentable sugars and nanofibrillated cellulose from cassava pulp was achieved by the combination of thermophilic enzymes (endoglucanase, β-glucosidase, and α-amylase) and a new atomization system (Star Burst System; SBS), which employs opposing water jets. The SBS represents a key technology for providing cellulose nanofibers and improving the enzymatic saccharification of cassava pulp. Depending on the enzymes used, the production of glucose from cassava pulp treated with the SBS was 1.2- to 2.5-fold higher than that from pulp not treated with the SBS. Nanofibrillated cellulose with the gel-like property in suspension was produced (yield was over 90%) by α-amylase treatment, which completely released trapped starch granules from the fibrous cell wall structure of cassava pulp pretreated with the SBS. The SBS provides an environmentally low-impact pretreatment system for processing biomass material into value-added products. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Characterization of chestnut (Castanea sativa, mill) starch for industrial utilization

    OpenAIRE

    2001-01-01

    Studies were conducted to characterize the chestnut and its starch. Chemical composition of the chestnuts showed high level of starch. Moisture level in the raw nuts was around 50g/100g in wet basis and starch content, around 80g/100g in dry basis; other nut flour components were protein (5.58 g/100g), lipid (5.39 g/100g), crude fiber (2.34 g/100g) and ash (2.14 g/100g). Starch fraction was chemically characterized in order to identify the granule quality as compared with those of cassava and...

  17. Ammonium acetate enhances solvent production by Clostridium acetobutylicum EA 2018 using cassava as a fermentation medium.

    Science.gov (United States)

    Gu, Yang; Hu, Shiyuan; Chen, Jun; Shao, Lijun; He, Huiqi; Yang, Yunliu; Yang, Sheng; Jiang, Weihong

    2009-09-01

    Cassava, due to its high starch content and low cost, is a promising candidate substrate for large-scale fermentation processes aimed at producing the solvents acetone, butanol and ethanol (ABE). However, the solvent yield from the fermentation of cassava reaches only 60% of that achieved by fermenting corn. We have found that the addition of ammonium acetate (CH(3)COONH(4)) to the cassava medium significantly promotes solvent production from cassava fermented by Clostridium acetobutylicum EA 2018, a mutant with a high butanol ratio. When cassava medium was supplemented with 30 mM ammonium acetate, the acetone, butanol and total solvent production reached 5.0, 13.0 and 19.4 g/l, respectively, after 48 h of fermentation. This level of solvent production is comparable to that obtained from corn medium. Both ammonium (NH(4) (+)) and acetate (CH(3)COO(-)) were required for increased solvent synthesis. We also demonstrated substantially increased acetic and butyric acid accumulation during the acidogenesis phase as well as greater acid re-assimilation during the solventogenesis period in ammonium acetate-supplemented cassava medium. Reverse transcription-polymerase chain reaction analysis indicated that the transcription of several genes encoding enzymes related to acidogenesis and solventogenesis in C. acetobutylicum EA 2018 were enhanced by the addition of ammonium acetate to the cassava medium.

  18. [Application of ICP-MS to detection of mineral elements and heavy metals in Cassava's byproducts].

    Science.gov (United States)

    Tao, Hai-Teng; Zhang, Chun-Jiang; Chen, Xiao-Ming; Lüi, Fei-Jie; Tai, Jian-Xiang; Li, Kai-Mian

    2009-07-01

    Cassava is a main cultivated tropical crop in China, its rich starch roots are often used to produce fuel ethanol in recent years, so it's a kind of hot biomass energy crops. But cassava's byproducts such as leaves, stems and peels are regarded as waste, and are not fully utilized. Cassava's byproducts contain many nutrients, and can be used to process high value food products. The contents of mineral elements and heavy metals in cassava's byproducts were studied by ICP-MS. The results showed that cassava's byproducts contained many elements necessary to human health, the sequence of macroelements was K>Ca>P> Mg>S>Mn>Zn>Na>Fe>B>Cu, particularly, the contents of Fe, Mn, Zn and B ranged from 10 to 800 microg x g(-1) (DW), while the contents of microelements including Mo, Co, Se and Ge ranged from 0.01 to 0.2 microg x g(-1) (DW), which are important to human health. Besides macroelements and microelements, the contents of heavy metals (As, Cr, Pb and Hg) were also important to identify the quality of farm products, and the results showed that cassava's byproducts contained little heavy metals except Pb (2.19 microg x g(-1) (DW) in stalk peels). All the data showed that cassava's byproducts accorded with the national hygiene standards.

  19. Cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Bull, Simon E

    2015-01-01

    Genetic transformation of plants is an indispensable technique used for fundamental research and crop improvement. Recent advances in cassava (Manihot esculenta Crantz) transformation have facilitated the effective generation of stably transformed cassava plants with favorable traits. Agrobacterium-mediated transformation of friable, embryogenic callus has evolved to become the most widely used approach and has been adopted by research laboratories in Africa. This procedure utilizes axillary meristem tissue (buds) to produce primary and secondary somatic embryos and subsequently friable, embryogenic callus. Agrobacterium harboring a binary expression cassette is used to transform this tissue, which is regenerated via cotyledons and shoot organogenesis to produce rooted in vitro plantlets. This chapter details each step of the procedure using the model cultivar 60444 and provides supplementary notes to successfully produce transgenic cassava.

  20. Cassava For Space Diet

    Science.gov (United States)

    Katayama, Naomi; Yamashita, Masamichi; Njemanze, Philip; Nweke, Felix; Mitsuhashi, Jun; Hachiya, Natumi; Miyashita, Sachiko; Hotta, Atuko

    Space agriculture is an advanced life support enginnering concept based on biological and ecological system ot drive the materials recycle loop and create pleasant life environment on distant planetary bodies. Choice of space diet is one of primary decision required ot be made at designing space agriculture. We propose cassava, Manihot esculenta and, for one major composition of space food materials, and evaluate its value and feasibility of farming and processing it for space diet. Criteria to select space crop species could be stated as follows. 1) Fill th enutritional requirements. There is no perfect food material to meet this requirements without making a combination with others. A set of food materials which are adopted inthe space recipe shall fit to the nutritional requirement. 2) Space food is not just for maintaining physiological activities of human, but an element of human culture. We shall consider joy of dining in space life. In this context, space foos or recipe should be accepted by future astronauts. Food culture is diverse in the world, and has close relatioship to each cultural background. Cassava root tuber is a material to supply mainly energy in the form of carbohydrate, same as cereals and other tuber crops. Cassava leaf is rich in protein high as 5.1 percents about ten times higher content than its tuber. In the food culture in Africa, cassava is a major component. Cassava root tuber in most of its strain contains cyanide, it should be removed during preparation for cooking. However certain strain are less in this cyanogenic compound, and genetically modified cassava can also aboid this problem safely.

  1. INTEGRATING CASSAVA VARIETIES AND Typhlodramulus aripo ...

    African Journals Online (AJOL)

    ACSS

    The cassava green mite (CGM), Mononychellus tanajoa, is a pest that reduces root yield of cassava (Manihot esculenta Crantz) by ... analysed for cassava varieties to sustain high population of T. aripo. ..... Journal of Economic Entomology.

  2. Effect of Starch Sources and Protein Content on Extruded Aquaculture Feed Containing DDGS

    Science.gov (United States)

    A 3x3 completely randomized design was used to investigate the extrusion cooking and product characteristics of DDGS, protein levels, and various starch sources in a laboratory scale single screw extruder. Cassava, corn, and potato starches with varying levels of DDGS (20, 30, and 40% wb) were extru...

  3. Use of biomass energy. Saccharification of raw starch and ethanol fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Ueda, S.

    1982-01-01

    Raw starch was saccharified under acidic condition of pH 3.5 using black-koji amylase, and the resultant saccharidies were fermented to give ethanol in succession. White polished rice flour was fermented at 30 degrees C during the period of 7 to 10 days to give ethanol. Semi-continuous ethanol fermentation was carried out using corn starch and cassava starch. Batch ethanol fermentation was also carried out using cassava or sweet potato. Sweet potato was fermented using Rhizopus gluco-amylase. 11 references.

  4. Effect of Cassava Starch Anaerobic Fermentation Liquid on Pumpkin Growth, Yield and Fruit Quality%木薯淀粉厌氧发酵液对南瓜生长发育、产量及果实品质的影响

    Institute of Scientific and Technical Information of China (English)

    邓英毅; 陈群; 黄影花; 雷雪娇; 禤为翔; 韦仕飞; 韦思羽; 韦民政; 叶亦心; 郑虚; 张艺超; 莫干辉; 李韦柳; 张新宇; 王向导

    2016-01-01

    In order to ascertain the new resource utilizating way of cassava starch waste for environmental protection,this paper studied the effect of cassava starch anaerobic fermentation liquid (CSAFL)on pumpkin growth,yield and fruit quality,taking ‘Mibennangua’ as experimental material.The results showed that applying CSAFL could significantly promote the vegetative and reproductive growth,increase pumpkin yield and improve its fruit quality. Using CSAFL could also remarkably promote the growth of pumpkin main stem and leaves,increase leaf chlorophyll content. Besides,its fruit setting number per single plant,single fruit weight and yield were higher than that of the contrast by over 50%. Its fruit size,fruit shape index,contents of soluble solid,soluble sugar,soluble protein,starch and VC were significantly or very significantly increased than that of the contrast.Therefore,CSAFL can be used as additional fertilizer in pumpkin production,so as to realize the dual purposes of turning waste into wealth,and improving pumpkin yield and quality.%为了探明木薯淀粉废液的环保资源化利用新路子,以蜜本南瓜为试验材料,开展了木薯淀粉厌氧发酵液对南瓜生长发育、产量和果实品质的影响研究。结果表明,施用木薯淀粉厌氧发酵液能显著促进南瓜植株的营养生长和生殖生长,提高产量并改善果实的品质。施用木薯淀粉厌氧发酵液能显著促进植株主蔓和叶片的生长,增加叶片叶绿素含量,单株结瓜数、单瓜质量和产量均比常规施肥对照提高50%以上,其果实大小、果形指数、可溶性固形物、可溶性糖、可溶性蛋白、淀粉含量和VC含量也比对照显著或极显著提高。木薯淀粉厌氧发酵液可作为追肥在南瓜生产中应用,达到变废为宝、提高南瓜产量和品质的双重目的。

  5. An ordered EST catalogue and gene expression profiles of cassava (Manihot esculenta) at key growth stages.

    Science.gov (United States)

    Li, You-Zhi; Pan, Ying-Hua; Sun, Chang-Bin; Dong, Hai-Tao; Luo, Xing-Lu; Wang, Zhi-Qiang; Tang, Ji-Liang; Chen, Baoshan

    2010-12-01

    A cDNA library was constructed from the root tissues of cassava variety Huanan 124 at the root bulking stage. A total of 9,600 cDNA clones from the library were sequenced with single-pass from the 5'-terminus to establish a catalogue of expressed sequence tags (ESTs). Assembly of the resulting EST sequences resulted in 2,878 putative unigenes. Blastn analysis showed that 62.6% of the unigenes matched with known cassava ESTs and the rest had no 'hits' against the cassava database in the integrative PlantGDB database. Blastx analysis showed that 1,715 (59.59%) of the unigenes matched with one or more GenBank protein entries and 1,163 (40.41%) had no 'hits'. A cDNA microarray with 2,878 unigenes was developed and used to analyze gene expression profiling of Huanan 124 at key growth stages including seedling, formation of root system, root bulking, and starch maturity. Array data analysis revealed that (1) the higher ratio of up-regulated ribosome-related genes was accompanied by a high ratio of up-regulated ubiquitin, proteasome-related and protease genes in cassava roots; (2) starch formation and degradation simultaneously occur at the early stages of root development but starch degradation is declined partially due to decrease in UDP-glucose dehydrogenase activity with root maturity; (3) starch may also be synthesized in situ in roots; (4) starch synthesis, translocation, and accumulation are also associated probably with signaling pathways that parallel Wnt, LAM, TCS and ErbB signaling pathways in animals; (5) constitutive expression of stress-responsive genes may be due to the adaptation of cassava to harsh environments during long-term evolution.

  6. Transcriptome response of cassava leaves under natural shade.

    Science.gov (United States)

    Ding, Zehong; Zhang, Yang; Xiao, Yi; Liu, Fangfang; Wang, Minghui; Zhu, Xinguang; Liu, Peng; Sun, Qi; Wang, Wenquan; Peng, Ming; Brutnell, Tom; Li, Pinghua

    2016-01-01

    Cassava is an important staple crop in tropical and sub-tropical areas. As a common farming practice, cassava is usually cultivated intercropping with other crops and subjected to various degrees of shading, which causes reduced productivity. Herein, a comparative transcriptomic analysis was performed on a series of developmental cassava leaves under both full sunlight and natural shade conditions. Gene expression profiles of these two conditions exhibited similar developmental transitions, e.g. genes related to cell wall and basic cellular metabolism were highly expressed in immature leaves, genes involved in lipid metabolism and tetrapyrrole synthesis were highly expressed during the transition stages, and genes related to photosynthesis and carbohydrates metabolism were highly expressed in mature leaves. Compared with the control, shade significantly induced the expression of genes involved in light reaction of photosynthesis, light signaling and DNA synthesis/chromatin structure; however, the genes related to anthocyanins biosynthesis, heat shock, calvin cycle, glycolysis, TCA cycle, mitochondrial electron transport, and starch and sucrose metabolisms were dramatically depressed. Moreover, the shade also influenced the expression of hormone-related genes and transcriptional factors. The findings would improve our understanding of molecular mechanisms of shade response, and shed light on pathways associated with shade-avoidance syndrome for cassava improvement.

  7. [Degradation of cassava residue by the cellulose degradation composite microbial system MC1].

    Science.gov (United States)

    Guo, Peng; Wang, Xiao-Fen; Zhu, Wan-Bin; Cheng, Xu; Cui, Zong-Jun

    2008-03-01

    The lignocelluloses of cassava residue are good biomass resources. They are mainly used to produce feeds and alcohol. It is a promising approach to utilize them to produce methane. But it is difficult to use cassava residue for producing methane because of its dispersive solid matter and much water. A cellulose degradation composite microbial system MC1 was applied to degrade cassava residue discarded from cassava starch manufactory, and the composition of the lignocelluloses and the soluble ingredients of cassava residue were analyzed. After 18 days' cultivation, the total weight of the cassava residue was reduced by 47.3%, the cellulose, hemi-cellulose and lignin of the cassava residue were reduced by 22.7%, 90.4% and 11.3%, respectively, and 85% of the whole weight relief was made by MC1 within 6 days. The soluble ingredients of the cassava residue were increased from the incipient 18% to 33% in the third day which was the peak value in the process. The total amount of the volatile products, analyzed by GC-MS, came to a maximum in the sixth day. Twelve kinds of volatile products in the fermentation broth were determined, in which ethanol, acetic acid, 1, 2-ethanediol, butanoic acid and glycerine were the major compounds, and they can be utilized by methanogenic organism directly or be changed into compounds that can be utilized by methanogens organism directly. Accordingly, it is very hopeful to use MC1 to degrade cassava residue as a method of prefermentation in methane fermentation.

  8. Domestication Syndrome Is Investigated by Proteomic Analysis between Cultivated Cassava (Manihot esculenta Crantz and Its Wild Relatives.

    Directory of Open Access Journals (Sweden)

    Feifei An

    Full Text Available Cassava (Manihot esculenta Crantz wild relatives remain a largely untapped potential for genetic improvement. However, the domestication syndrome phenomena from wild species to cultivated cassava remain poorly understood. The analysis of leaf anatomy and photosynthetic activity showed significantly different between cassava cultivars SC205, SC8 and wild relative M. esculenta ssp. Flabellifolia (W14. The dry matter, starch and amylose contents in the storage roots of cassava cultivars were significantly more than that in wild species. In order to further reveal the differences in photosynthesis and starch accumulation of cultivars and wild species, the globally differential proteins between cassava SC205, SC8 and W14 were analyzed using 2-DE in combination with MALDI-TOF tandem mass spectrometry. A total of 175 and 304 proteins in leaves and storage roots were identified, respectively. Of these, 122 and 127 common proteins in leaves and storage roots were detected in SC205, SC8 and W14, respectively. There were 11, 2 and 2 unique proteins in leaves, as well as 58, 9 and 12 unique proteins in storage roots for W14, SC205 and SC8, respectively, indicating proteomic changes in leaves and storage roots between cultivated cassava and its wild relatives. These proteins and their differential regulation across plants of contrasting leaf morphology, leaf anatomy pattern and photosynthetic related parameters and starch content could contribute to the footprinting of cassava domestication syndrome. We conclude that these global protein data would be of great value to detect the key gene groups related to cassava selection in the domestication syndrome phenomena.

  9. Domestication Syndrome Is Investigated by Proteomic Analysis between Cultivated Cassava (Manihot esculenta Crantz) and Its Wild Relatives.

    Science.gov (United States)

    An, Feifei; Chen, Ting; Stéphanie, Djabou Mouafi Astride; Li, Kaimian; Li, Qing X; Carvalho, Luiz J C B; Tomlins, Keith; Li, Jun; Gu, Bi; Chen, Songbi

    2016-01-01

    Cassava (Manihot esculenta Crantz) wild relatives remain a largely untapped potential for genetic improvement. However, the domestication syndrome phenomena from wild species to cultivated cassava remain poorly understood. The analysis of leaf anatomy and photosynthetic activity showed significantly different between cassava cultivars SC205, SC8 and wild relative M. esculenta ssp. Flabellifolia (W14). The dry matter, starch and amylose contents in the storage roots of cassava cultivars were significantly more than that in wild species. In order to further reveal the differences in photosynthesis and starch accumulation of cultivars and wild species, the globally differential proteins between cassava SC205, SC8 and W14 were analyzed using 2-DE in combination with MALDI-TOF tandem mass spectrometry. A total of 175 and 304 proteins in leaves and storage roots were identified, respectively. Of these, 122 and 127 common proteins in leaves and storage roots were detected in SC205, SC8 and W14, respectively. There were 11, 2 and 2 unique proteins in leaves, as well as 58, 9 and 12 unique proteins in storage roots for W14, SC205 and SC8, respectively, indicating proteomic changes in leaves and storage roots between cultivated cassava and its wild relatives. These proteins and their differential regulation across plants of contrasting leaf morphology, leaf anatomy pattern and photosynthetic related parameters and starch content could contribute to the footprinting of cassava domestication syndrome. We conclude that these global protein data would be of great value to detect the key gene groups related to cassava selection in the domestication syndrome phenomena.

  10. Characterisation of Cassava Bagasse and Composites Prepared by Blending with Low-Density Polyethylene

    Directory of Open Access Journals (Sweden)

    Fabiane Oliveira Farias

    2014-12-01

    Full Text Available The main objective of this study was to characterise the cassava bagasse and to evaluate its addition in composites. Two cassava bagasse samples were characterised using physicochemical, thermal and microscopic techniques, and by obtaining their spectra in the mid-infrared region and analysing them by using x-ray diffraction. Utilising sorption isotherms, it was possible to establish the acceptable conditions of temperature and relative humidity for the storage of the cassava bagasse. The incorporation of cassava bagasse in a low-density polyethylene (LDP matrix was positive, increasing the elasticity modulus values from 131.90 for LDP to 186.2 for 70% LDP with 30% SP bagasse. These results were encouraging because cassava bagasse could serve as a structural reinforcement, as well as having environmental advantages for its application in packaging, construction and automotive parts.

  11. Cassava Flour Substitution Modulates Glycemic Responses and Glycemic Index of Wheat Breads in Apparent Healthy Volunteers.

    Science.gov (United States)

    Okafor, Ebelechukwu N; Erukainure, Ochuko L; Ozumba, Augusta U; Adewale, Chris O; Kayode, Funmi O; Asieba, Godfrey O; Adesegha, Olubukola I; Elemo, Gloria N

    2017-07-04

    Different carbohydrate foods produce different glycemic responses even with little or no difference in macronutrient composition. Cassava constitutes one of the major staples in Nigeria. Four blends of cassava-wheat bread samples with 0, 10, 15, and 20% cassava flour inclusion were fed individually to groups of healthy human volunteers. Subjects were studied on separate occasions in the morning after a 10-12-hr overnight fast. Blood glucose responses were measured at intervals of 30 min over a period of 2 hr. Glucose was used as a reference food. There were normal glucose responses to the bread samples studied. Increase in cassava incorporation led to less significant glycemic responses. The glycemic index values ranged from 91-94. Results from this study indicate that the inclusion of cassava flour in bread production might not pose a threat to blood glucose response of individuals.

  12. Growth inhibition of thermotolerant yeast, Kluyveromyces marxianus, in hydrolysates from cassava pulp.

    Science.gov (United States)

    Rugthaworn, Prapassorn; Murata, Yoshinori; Machida, Masashi; Apiwatanapiwat, Waraporn; Hirooka, Akiko; Thanapase, Warunee; Dangjarean, Hatairat; Ushiwaka, Satoru; Morimitsu, Kozo; Kosugi, Akihiko; Arai, Takamitsu; Vaithanomsat, Pilanee

    2014-07-01

    In this study, we report the inhibition of Kluyveromyces marxianus TISTR5925 growth and ethanol fermentation in the presence of furan derivatives and weak acids (acetic acid and lactic acid) at high temperatures. Cassava pulp, obtained as the waste from starch processing, was collected from 14 starch factories located in several provinces of Thailand. At a high temperature (42 °C), the cassava pulp hydrolysate from some starch factories strongly inhibited growth and ethanol production of both K. marxianus (strain TISTR5925) and Saccharomyces cerevisiae (strain K3). HPLC detected high levels of lactic acid and acetic acid in the hydrolysates, suggesting that these weak acids impaired the growth of K. marxianus at high temperature. We isolated Trp-requiring mutants that had reduced tolerance to acetic acid compared to the wild-type. This sensitivity to acetic acid was suppressed by supplementation of the medium with tryptophan.

  13. Emissão de folhas e início de acumulação de amido em raízes de uma variedade de mandioca em função da época de plantio Leaf emergence and beginning of starch accumulation in roots of a cassava variety as a function of planting date

    Directory of Open Access Journals (Sweden)

    Alfredo Schons

    2007-12-01

    Full Text Available O número de folhas acumulado (NF na haste principal está associado com o aparecimento de vários estádios de desenvolvimento da cultura da mandioca. O início de acumulação de amido (IAA nas raízes tuberosas da mandioca marca o início da translocação dos fotoassimilados para o principal órgão de reserva nessa espécie. O objetivo deste trabalho foi estimar o filocrono e identificar um indicador morfológico baseado no NF para o IAA em mandioca plantada em diferentes épocas. Um experimento a campo foi conduzido em Santa Maria, RS, Brasil, com quatro épocas de plantio (28/09; 11/10; 16/11 e 27/12/2005. A variedade de mandioca usada foi a "RS 13", plantada em baldes de 12 litros, enterrados no espaçamento com 2,0 x 0,8m. O delineamento experimental foi o inteiramente casualizado com 11 repetições. A soma térmica diária (STd, °C dia foi calculada a partir da emergência e acumulada por: STa = sigmaSTd. O IAA foi determinado nas plantas de cada balde quando uma raiz atingia um diâmetro de 1cm. O NF na data do IAA e o número final de folhas (NFF até o primeiro simpódio também foram determinados. O filocrono variou de 20,3 a 29,5°C dia folha-1 e seus valores foram maiores quanto mais tardio foi o plantio. O NFF variou entre as épocas de plantio, aumentando com o atraso do plantio. O NF no IAA foi similar nas quatro épocas de plantio e ocorreu quando, em média, o NF corresponde a 20,9 (±1,0 folhas.The accumulated number of leaves (NF on the main stem is related to the appearance of several developmental stages in cassava. The beginning of starch accumulation (IAA in the fibrous roots of cassava switches the source/sink ratio because of the translocation of photoassimilates to the major storage organ in this species. This study was aimed at estimating the phyllochron and identifing a morphological indicator based on NF for IAA in cassava grown in several planting dates. A field experiment was carried out in Santa Maria, RS

  14. Fermentation and recovery of L-glutamic acid from cassava starch hydrolysate by ion-exchange resin column Produção de ácido L-glutâmico a partir de um hidrolisado de amido de mandioca usando resina de troca iônica

    Directory of Open Access Journals (Sweden)

    K. Madhavan Nampoothiri

    1999-07-01

    Full Text Available Investigations were carried out with the aim of producing L-glutamic acid from Brevibacterium sp. by utilizing a locally available starchy substrate, cassava (Manihot esculenta Crantz. Initial studies were carried out in shake flasks, which showed that even though the yield was high with 85-90 DE (Dextrose Equivalent value, the maximum conversion yield (~34% was obtained by using only partially digested starch hydrolysate, i.e. 45-50 DE. Fermentations were carried out in batch mode in a 5 L fermenter, using suitably diluted cassava starch hydrolysate, using a 85-90 DE value hydrolysate. Media supplemented with nutrients resulted in an accumulation of 21 g/L glutamic acid with a fairly high (66.3% conversation yield of glucose to glutamic acid (based on glucose consumed and on 81.74% theoretical conversion rate. The bioreactor conditions most conducive for maximum production were pH 7.5, temperature 30°C and an agitation of 180 rpm. When fermentation was conducted in fed-batch mode by keeping the residual reducing sugar concentration at 5% w/v, 25.0 g/L of glutamate was obtained after 40 h fermentation (16% more the batch mode. Chromatographic separation by ion-exchange resin was used for the recovery and purification of glutamic acid. It was further crystallized and separated by making use of its low solubility at the isoelectric point (pH 3.2.Pesquisas foram realizadas com o objetivo de produzir ácido glutâmico a partir de Brevibacterium sp. utilizando um substrato disponível na região, a mandioca (Manihot esculenta Crantz. Estudos iniciais, desenvolvidos em shaker, demonstraram que mesmo obtendo elevado rendimento com 85-90 DE (Dextrose Equivalent value, a taxa de conversão máxima (~34% foi obtida usando um hidrolisado de amido parcialmente digerido, i.e. 45-50 DE. As fermentações foram realizadas em um fermentador de 5 L, usando um hidrolisado de amido de mandioca adequadamente diluído, preparado à partir de um valor DE de 85-90. O

  15. Substituição do milho pelo resíduo de fecularia de mandioca sobre o desempenho, digestibilidade e características de carcaça de novilhos confinados = Replacing corn with cassava starch by-products on the performance, digestibility and carcass characteristics of bulls in confinement

    Directory of Open Access Journals (Sweden)

    Maribel Velandia Valero

    2009-10-01

    Full Text Available O efeito de substituição do milho pelo resíduo desidratado de fecularia de mandioca (0; 12,5; 22,8 e 32,7% foi avaliado sobre o desempenho, a digestibilidade e características de carcaça e 32 bovinos mestiços (½ Nelore x ½ Angus de aproximadamente 18 meses de idade e 380 kg de peso vivo. O delineamento experimental foi o inteiramente casualizado, com quatro tratamentos e oito repetições. Foram analisados o ganho médio diário (GMD, rendimento de carcaça (RC, espessura de gordura de cobertura (EGC, área de olho de lombo (AOL, comprimento de perna (CP, espessura de coxão (EC, ingestãode matéria seca (IMS, conversão alimentar (CA, digestibilidade total aparente da matéria seca (DAMS, matéria orgânica (DAMO, proteína bruta (DAPB, energia bruta (DAEB, fibra em detergente ácido (DAFDA e fibra em detergente neutro (DAFDN. O experimento foidesenvolvido durante um período de 56 dias, após 14 dias de adaptação. Os resultados de GMD, RC, CA, EGC, AOL, CP e EC não apresentaram diferenças (p > 0,05 entre os tratamentos. A IMS apresentou redução linear quando o milho foi substituído pelo resíduodesidratado de fecularia de mandioca. Os coeficientes de digestibilidade da MS, MO, PB, EB, FDN e FDA não variaram entre as rações experimentais.The effects of replacing corn with different levels of cassava starch by-products (0; 12.5; 22.8; and 32.7% were evaluated on performance, digestibility and carcass traits of feedlot bulls. Thirty-twocrossbred bulls (½ Nelore x ½ Angus around 18 months of age and 380 kg of body weight were used. A completely randomized design was used, with 4 treatments and 8 replicates. Evaluated traits were: average daily gain (ADG, carcass dressing (CD, backfat thickness (BT, Longissimus area (LDA, leg length (LL and cushion thickness (CT, dry matter intake (DMI, feed conversion ratio (FCR, total apparent digestibility of dry matter (DMDC, organic matter (OMDC, crude protein (CPDC, crude energy (CEDC

  16. Two cassava promoters related to vascular expression and storage root formation.

    Science.gov (United States)

    Zhang, Peng; Bohl-Zenger, Susanne; Puonti-Kaerlas, Johanna; Potrykus, Ingo; Gruissem, Wilhelm

    2003-12-01

    Cassava ( Manihot esculenta Crantz) storage roots, organs accumulating large amounts of starch, develop from primary roots via secondary growth. The availability of promoters related to storage-root formation is a prerequisite for engineering root traits in cassava. Two cDNAs, c15 and c54, were identified from a storage-root cDNA library of cassava MCol1505 via differential screening. The transcripts of c15 and c54 were detected in storage roots but not in leaves by Northern analysis. Homology analysis of the deduced amino acid sequences showed that C15 is likely to be related to cytochrome P450 proteins, which are involved in the oxidative degradation of various compounds, while C54 may be related to Pt2L4, a cassava glutamic acid-rich protein. The promoter regions of c15 and c54 were isolated from the corresponding clones in a cassava genomic library. A 1,465-bp promoter fragment ( p15/1.5) of c15 and a 1,081-bp promoter region ( p54/1.0) of c54 were translationally fused to the uidA reporter gene, and introduced into cassava and Arabidopsis thaliana (L.) Heynh. The expression patterns of p15/1.5::uidA and p54/1.0::uidA in transgenic plants showed that both promoters are predominantly active in phloem, cambium and xylem vessels of vascular tissues from leaves, stems, and root systems. More importantly, strong beta-glucuronidase activity was also detected in the starch-rich parenchyma cells of transgenic storage roots. Our results demonstrate that the two promoters are related to vascular expression and secondary growth of storage roots in cassava.

  17. Amylopectin small chain glucans form structure fingerprint that determines botanical origin of starch.

    Science.gov (United States)

    Jaiswal, Sarita; Chibbar, Ravindra N

    2017-02-20

    Starch granule size, shape and structure of amylopectin are species specific and influence starch properties and end-use of starch. Amylopectin glucan chain structure was used to predict the starch botanical sources. Mathematical probability for accumulation of small glucan chains DP 6-10 reveal exponential fit curve with maximum R(2) in smallest granule size starches (Chlamydomonas, quinoa, buckwheat). Cereal and cassava showed R(2) of 0.81-0.96 while in pulses and tubers it was less than 0.7. The amylopectin small glucan chains form a unique 'finger print region' that identified starch botanical source. Differential amylopectin chain length distribution (APCLD) graphs between DP 6-80 of all species from Chlamydomonas starch distinguished five structural groups that clustered the 31 analyzed starches into four major patterns. APCLD analyses of amylopectin combined with characteristic pattern of small linear DP (6-9) glucan chains predicted the starch botanical source.

  18. Acid and enzymatic hydrolysis to recover reducing sugars from cassava bagasse: an economic study

    Directory of Open Access Journals (Sweden)

    Woiciechowski Adenise Lorenci

    2002-01-01

    Full Text Available The objective of this work was to study the acid and enzymatic hydrolysis of cassava bagasse for the recovery of reducing sugars and to establish the operational costs. A statistical program "Statistica", based on the surface response was used to optimize the recovery of reducing sugars in both the processes. The process economics was determined considering the values of reducing sugars obtained at laboratory scale, and the operations costs of a cylindrical reactor of 1500 L, with flat walls at the top and bottom. The reactor was operated with 150 kg of cassava bagasse and 1350 kg of water. The yield of the acid hydrolysis was 62.4 g of reducing sugars from 100 g of cassava bagasse containing 66% starch. It represented 94.5% of reducing sugar recovery. The yield of the enzymatic hydrolysis was 77.1 g of reducing sugars from 120 g of cassava bagasse, which represented 97.3% of reducing sugars recovery. Concerning to the time, a batch of acid hydrolysis required 10 minutes, plus the time to heat and cool the reactor, and a batch of the enzymatic hydrolysis needed 25 hours and 20 minutes, plus the time to heat and to cool the reactor. Thus, the acid hydrolysis of 150 kg of cassava bagasse required US$ 34.27, and the enzymatic hydrolysis of the same amount of cassava bagasse required US$ 2470.99.

  19. Efeito da concentração de fibra e parâmetros operacionais de extrusão sobre as propriedades de pasta de misturas de fécula de mandioca e polpa cítrica Effect of the fiber content and operational extrusion parameters on the pasting characteristics of cassava starch and orange pulp mixture

    Directory of Open Access Journals (Sweden)

    Luciana Bronzi de Souza

    2010-09-01

    Full Text Available Para preencher as várias demandas para funcionalidades em produtos alimentícios, a fécula de mandioca misturada à polpa de laranja desidratada foi extrusada sob diferentes condições (0 a 20% de fibras na mistura; (14,6 a 21,4% de umidade e (60,8 a 129 ºC de temperatura de extrusão, objetivando o uso em produtos instantâneos ricos em fibras. A rotação da rosca foi mantida constante em 272 rpm, a abertura da matriz foi 3 mm, a taxa de compressão da rosca foi 3:1 e a taxa de alimentação foi de 150 g/minuto. Os produtos extrusados moídos foram analisados para as propriedades de pasta: viscosidade inicial, pico de viscosidade, quebra de viscosidade, viscosidade final e tendência à retrogradação no Rapid Visco Analyser (RVA, tendo em vista a importância destes parâmetros para este tipo de utilização. Os resultados obtidos mostraram que a porcentagem de fibras foi o parâmetro de maior influência nas propriedades de pasta, e que nas condições de baixo teor de fibras, elevada temperatura e baixa umidade pode ter ocorrido degradação acentuada do amido e solubilização das fibras, levando à redução dos parâmetros de viscosidade.Due the various demands for processed foods with functional ingredients, a mixture of cassava starch and dried orange pulp was extruded under different conditions (0 to 20% of fibers in the mixture; (14.6 to 21.4% moisture; and (60.8 to 129 ºC temperature of extrusion aiming at the use in high fiber instant products. The screw speed was kept constant (272 rpm, the diameter of die was 3 mm, the compression ratio was 3:1, and the feed rate was 150 g/minute. The following pasting properties of the extruded products were analyzed: initial viscosity, peak of viscosity, breakdown, final viscosity, and retrogradation tendency using a Rapid Visco Analyser (RVA in view of the importance of these parameters for such use. The results showed that the percentage of fibers was the greatest variable of influence

  20. Hidratação de tecidos de raízes de mandioca (Manihot esculenta Crantz. e gelatinização do amido durante a cocção Hydration of cassava tissues and starch gelatinization during the cooking process

    Directory of Open Access Journals (Sweden)

    Soraya S. Butarelo

    2004-09-01

    Full Text Available Durante a cocção da mandioca ocorrem modificações físicas e químicas nos tecidos e a textura final é importante para a aceitabilidade e o consumo de mandiocas. A cocção a 80° e em água em ebulição de duas cultivares, aos 12 e 25 meses após o plantio, foi acompanhada determinando-se o ganho de peso (hidratação e o grau de gelatinização das amostras. Gelatinização foi determinada por colorimetria com iodo após dissolução em álcali das amostras cozidas por diferentes períodos de tempo. A 80°C a hidratação e a gelatinização não se completaram, o que ocorreu com a cocção em água em ebulição. O grau de hidratação foi diferente entre cultivares e entre amostras de 12 e 25 meses de plantio e pode ser descrito matematicamente por modelo de ordem zero. Amostras colhidas 12 meses após ao plantio hidrataram mais rápido que aos 25 meses e a cultivar IAPAR-19 Pioneira hidratou mais rápido que a cultivar Catarina Amarela. Quanto mais rápida a hidratação mais rápido o cozimento e quanto maior a hidratação maior o rendimento em produto cozido.Cooking of cassava root tissues causes both physical and chemical modifications and the final texture of the product is important for the acceptability and consumption of the food. Cooking tissue samples at 80° and in boiling water from two cultivars, harvested 12 and 25 months after planting date, was accompanied by determinig weight gain and starch gelatinization of the samples. Starch gelatinization was determined by colorimetry with iodine after solubilization in alkali of samples cooked for different period of times. At 80°C neither hydration or gelatinization were complete, which occurred at in boiling water. Hydration was different between cultivars and harvesting ages and could be described by a zero order mathematical model. Samples harvested 12 months after planting date hydrated faster than the ones harvested after 25 months and IAPAR-19 Pioneira hydrated faster

  1. Brucite nanoplate reinforced starch bionanocomposites

    Science.gov (United States)

    In this paper the mechanical reinforcement in a series of bionanocomposites films based on starch and nano-sized brucite, Mg(OH)2, was investigated. Brucite nanoplates with an aspect ratio of 9.25 were synthesized by wet precipitation and incorporated into starch matrices at different concentrations...

  2. CARACTERIZACIÓN MORFOLÓGICA DE PELÍCULAS BIODEGRADABLES A PARTIR DE ALMIDÓN MODIFICADO DE YUCA, AGENTE ANTIMICROBIANO Y PLASTIFICANTE CARACTERIZAÇÃO MORFOLÓGICA DE FILMES BIODEGRADÁVEIS A PARTIR DE AMIDO MODIFICADO DE MANDIOCA, AGENTE ANTIMICROBIANO E PLASTIFICANTE MORPHOLOGICAL CHARACTERIZATION OF BIODEGRADABLE FILMS MADE FROM MODIFIED CASSAVA STARCH, ANTIMICROBIAL AGENT AND PLASTICIZER

    Directory of Open Access Journals (Sweden)

    REINALDO VELASCO M

    2012-12-01

    propriedades microestruturais e mecânicas dos amidos termoplásticos, que são essenciais para a continuidade no estudo de filmes biodegradáveisIt was evaluated the morphological surface of thermoplastic starch (TPS obtained from three modified cassava starch varieties, plasticizer and an antimicrobial agent. The films was made by blown extrusion and extended over a slide and then was taken photomicrographs with 4x and 10x objectives. It was used High Resolution Optical Microscopy to image characterization. The technique showed the effect of plasticizer addition over the starch films microstructure, it was found some inhomogeneity; however was identified some smooth regions related to form and size of starch granule, plasticizer concentration and extrusion variables process like velocity screw and temperature profile. This research contributed to characterize microstructural properties and gave some insights about the mechanical behaviour of TPS films, needed to study and make biodegradable films.

  3. Use of Cassava Peel as Carbon Source for Production of Amylolytic Enzymes by Aspergillus niveus

    OpenAIRE

    SILVA, Tony Marcio; ALARCON, Ricardo Fernandes; DAMASIO, Andre Ricardo de Lima; Michelin, Michele; Maller, Alexandre; Douglas C. Masui; TERENZI, Hector Francisco; Jorge, Joao Atilio; Polizeli, Maria de Lourdes T. M.

    2009-01-01

    Aspergillus niveus produced high levels of alpha-amylase and glucoamylase in submerged fermentation using the agricultural residue cassava peel as a carbon source. In static conditions, the amylase production was substantially greater than in the agitated condition. The optimized culture conditions were initially at pH 5.0, 35 degrees C during 48 hours. Amylolytic activity was still improved (50%) with a mixture of cassava peel and soluble starch in the proportion 1:1 (w/w). The crude extract...

  4. Starch gelatinization.

    Science.gov (United States)

    Ratnayake, Wajira S; Jackson, David S

    2009-01-01

    Starch occurs as highly organized structures, known as starch granules. Starch has unique thermal properties and functionality that have permitted its wide use in food products and industrial applications. When heated in water, starch undergoes a transition process, during which the granules break down into a mixture of polymers-in-solution, known as gelatinization. The sequence of structural transformations that the starch granule undergoes during this order-to-disorder transition has been extensively researched. None of the published starch gelatinization theories can fully and adequately explain the exact mechanism of sequential structural changes that starch granules undergo during gelatinization. This chapter analyzes several published theories and summarizes our current understanding of the starch gelatinization process.

  5. Cassava as an energy crop

    DEFF Research Database (Denmark)

    Kristensen, Søren Bech Pilgaard; Birch-Thomsen, Torben; Rasmussen, Kjeld;

    2014-01-01

    , which represent two major agro-ecological environments in the Soudan-zone in Mali. The results reveal that farmers are experienced cassava producers and are interested in an expansion of cassava cultivation for bioethanol production and that suitable areas are available, especially for an expansion...

  6. Sensorial evolution of cassava flour (Manihot esculenta crantz) added to protein concentrate cassava leaves

    OpenAIRE

    Lima, Elaine C S; Feijo, Márcia B S; Freitas, Maria C J; dos Santos, Edna R; Armando U.O. SABAA-SRUR; Moura, Luciana S M

    2012-01-01

    Cassava is regarded as the nutritional base of populations in developing countries, and flour, product made of cassava, is the most consumed in the world. The cassava leaves are very rich in vegetable proteins, but a big amount is lost in processing the crop. The objective of this study was to do a sensory evaluation of cassava flour to which a protein concentrate obtained from cassava leaves (CPML) was added. The CPML was obtained from cassava leaves by isoelectric precipitation and added to...

  7. Influence of Mucilage Viscosity On The Globule Structure And Stability Of Certain Starch Emulsions

    Directory of Open Access Journals (Sweden)

    Uhumwangho MU

    2005-05-01

    Full Text Available A study was carried out to determine the influence of mucilage viscosity on the globule structure (i.e. size and number of certain starch emulsions. The starches investigated were cassava, potato and maize. The emulsions were prepared by mixing the starch mucilage of a predetermined concentration 4%w/v with arachis oil in the ratio 50:50, using a silverson mixer fitted with a dispersator head. The emulsions were stored at room temperature (28±20C for 7 days. Changes in globule size were monitored by photomicroscopy. Viscosities of the mucilage and those of resulting emulsions were determined using a capillary flow method. The viscosities of the emulsions expressed as time of flow (seconds, were 680 (cassava starch, 369 (potato starch and 270 (Maize starch, and for the mucilage 510 (cassava, 336 (potato and 248 (maize. The corresponding mean globule sizes of the fresh emulsions were (µm 28±6, 42±6 and 45±5 respectively. The increase in globule size during storage (measure of globule coalescence rate was 1.8±0.2µm day -1 (cassava, 3.5±0.2µm day -1 (potato and 4.6±0.3µm day -1 (maize. Thus, a higher viscosity of the dispersion medium is associated with the production of finer and more stable emulsions.

  8. Comparative Proteome Analysis of the Tuberous Roots of Six Cassava (Manihot esculenta) Varieties Reveals Proteins Related to Phenotypic Traits.

    Science.gov (United States)

    Schmitz, Gabriela Justamante Händel; de Magalhães Andrade, Jonathan; Valle, Teresa Losada; Labate, Carlos Alberto; do Nascimento, João Roberto Oliveira

    2016-04-27

    Cassava (Manihot esculenta Crantz) is a staple food and an important source of starch, and the attributes of its tuberous root largely depend on the variety. The proteome of cassava has been investigated; however, to date, no study has focused on varieties that reveal the molecular basis of phenotypical characteristics. Therefore, we aimed to compare the proteome of the tuberous roots of six cassava varieties that differed in carbohydrates, carotenoids, and resistance to diseases, among other attributes. Two-dimensional gels showed 146 differential spots between the varieties, and the functional roles of some differential proteins were correlated to phenotypic characteristics of the varieties, such as the amount of carbohydrates or carotenoids and the resistance to biotic or abiotic stresses. The results obtained here highlight elements that might help to direct the improvement of new cultivars of cassava, which is an economically and socially relevant crop worldwide.

  9. Dark hydrogen fermentation from hydrolyzed starch treated with recombinant amylase originating from Caldimonas taiwanensis On1.

    Science.gov (United States)

    Chen, Shing-Der; Sheu, Der-Shyan; Chen, Wen-Ming; Lo, Yung-Chung; Huang, Tian-I; Lin, Chiu-Yue; Chang, Jo-Shu

    2007-01-01

    Starch is one of the most abundant resources on earth and is suited to serve as a cost-effective feedstock for biological hydrogen production. However, producing hydrogen from direct fermentation of starch is usually inefficient, as the starch hydrolysis is often the rate-limiting step. Therefore, in the present work, enzymatic starch hydrolysis was conducted to enhance the feasibility of using starch feedstock for H2 production. The amylase (with a molecular weight of ca. 112 kDa) used for starch hydrolysis was produced from a recombinant E. coli harboring an amylase gene originating from Caldimonas taiwanensis On1. Using statistical experimental design, the optimal pH and temperature for starch hydrolysis with the recombinant amylase was pH 6.86 and 52.4 degrees C, respectively, at an initial starch concentration of 7 g/L. The hydrolyzed products contained mainly glucose, maltotriose, and maltotetrose, while a tiny amount of maltose was also detected. The enzymatically hydrolyzed products of soluble starch and cassava starch were used as the substrate for dark hydrogen fermentation using Clostridium butyricum CGS2 and Clostridium pasteurianum CH4. The highest H2 production rate (vH2) and yield (YH2) of C. butyricum CGS2 was 124.0 mL/h/L and 6.32 mmol H2/g COD, respectively, both obtained with the hydrolysate of cassava starch. The best H2 production rate (63.0 mL/h/L) of C. pasteurianum CH4 occurred when using hydrolyzed cassava starch as the substrate, whereas the highest yield (9.95 mmol H2/g COD) was obtained with the hydrolyzed soluble starch.

  10. The management of cassava toxicity and its changing sociocultural context in the Kei Islands, eastern Indonesia.

    Science.gov (United States)

    Soselisa, Hermien L; Ellen, Roy

    2013-01-01

    Over a period of 150 years the Kei Islands have undergone environmental change, from rainforest to dryland savanna woodland. This has been accompanied by a shift in starch staple from sago, tubers, and grain to cassava. We show how this has been an effective ecological adaptation with social ramifications, not least the adoption of bitter cassava as a cultural identity marker. One of the problems of bitter cassava diets where people have become dependent upon them in poor parts of the Old World tropics are the effects of toxicity. We show how through a combination of factors and strategies this has not been a major issue in the Kei Islands, and how through a government-assisted agricultural project, attempts are being made to build upon this successful transition. The viability of present trends are evaluated.

  11. Genomics approaches to unlock the high yield potential of cassava, a tropical model plant

    Directory of Open Access Journals (Sweden)

    Shengkui ZHANG,Ping'an MA,Haiyan WANG,Cheng LU,Xin CHEN,Zhiqiang XIA,Meiling ZOU,Xinchen ZHOU,Wenquan WANG

    2014-12-01

    Full Text Available Cassava, a tropical food, feed and biofuel crop, has great capacity for biomass accumulation and an extraordinary efficiency in water use and mineral nutrition, which makes it highly suitable as a model plant for tropical crops. However, the understanding of the metabolism and genomics of this important crop is limited. The recent breakthroughs in the genomics of cassava, including whole-genome sequencing and transcriptome analysis, as well as advances in the biology of photosynthesis, starch biosynthesis, adaptation to drought and high temperature, and resistance to virus and bacterial diseases, are reviewed here. Many of the new developments have come from comparative analyses between a wild ancestor and existing cultivars. Finally, the current challenges and future potential of cassava as a model plant are discussed.

  12. High surface area activated carbon prepared from cassava peel by chemical activation.

    Science.gov (United States)

    Sudaryanto, Y; Hartono, S B; Irawaty, W; Hindarso, H; Ismadji, S

    2006-03-01

    Cassava is one of the most important commodities in Indonesia, an agricultural country. Cassava is one of the primary foods in our country and usually used for traditional food, cake, etc. Cassava peel is an agricultural waste from the food and starch processing industries. In this study, this solid waste was used as the precursor for activated carbon preparation. The preparation process consisted of potassium hydroxide impregnation at different impregnation ratio followed by carbonization at 450-750 degrees C for 1-3 h. The results revealed that activation time gives no significant effect on the pore structure of activated carbon produced, however, the pore characteristic of carbon changes significantly with impregnation ratio and carbonization temperature. The maximum surface area and pore volume were obtained at impregnation ratio 5:2 and carbonization temperature 750 degrees C.

  13. Awareness of Cassava Peel Utilization Forms among Cassava ...

    African Journals Online (AJOL)

    hp

    2Department of Agricultural Extension and Rural Development, Federal University of Agriculture, .... on the management of the cassava peels; ... likely to enhance their adoption of new .... determines the adoption of innovation and as.

  14. Synthesis of grafted flocculants based on several kinds of starch and its performance in water turbidity removal

    OpenAIRE

    Kaavessina Mujtahid; Distantina Sperisa; Fadilah

    2017-01-01

    Taro starch, cassava starch and also their modified were prepared as a backbone of grafted flocculants. These flocculants were synthesized by combining the properties of synthetic and natural polymer via the ‘grafting to’ method that separated into two stages. The first stage was synthesizing of non-terminated polyacrylamide (nt-PAM) and then followed by the second stage grafting of the nt-PAM onto several kinds of starch. The intrinsic viscosity (η) and average molecular weight (Mv) of starc...

  15. Model approach to starch functionality in bread making.

    Science.gov (United States)

    Goesaert, Hans; Leman, Pedro; Delcour, Jan A

    2008-08-13

    We used modified wheat starches in gluten-starch flour models to study the role of starch in bread making. Incorporation of hydroxypropylated starch in the recipe reduced loaf volume and initial crumb firmness and increased crumb gas cell size. Firming rate and firmness after storage increased for loaves containing the least hydroxypropylated starch. Inclusion of cross-linked starch had little effect on loaf volume or crumb structure but increased crumb firmness. The firming rate was mostly similar to that of control samples. Presumably, the moment and extent of starch gelatinization and the concomitant water migration influence the structure formation during baking. Initial bread firmness seems determined by the rigidity of the gelatinized granules and leached amylose. Amylopectin retrogradation and strengthening of a long-range network by intensifying the inter- and intramolecular starch-starch and possibly also starch-gluten interactions (presumably because of water incorporation in retrograded amylopectin crystallites) play an important role in firming.

  16. Synthesis of grafted flocculants based on several kinds of starch and its performance in water turbidity removal

    Directory of Open Access Journals (Sweden)

    Kaavessina Mujtahid

    2017-01-01

    Full Text Available Taro starch, cassava starch and also their modified were prepared as a backbone of grafted flocculants. These flocculants were synthesized by combining the properties of synthetic and natural polymer via the ‘grafting to’ method that separated into two stages. The first stage was synthesizing of non-terminated polyacrylamide (nt-PAM and then followed by the second stage grafting of the nt-PAM onto several kinds of starch. The intrinsic viscosity (η and average molecular weight (Mv of starches-g-PAM were observed and their molecular structures were analyzed by using Fourier Transform Infra-Red (FTIR. Finally, the obtained flocculants were tested to evaluate their performance for the treatment of the simulated water turbidity containing 10 g of kaolin in 1000 ml of aquadest. The results showed that all the grafted flocculants can be good comparable to some commercial organic flocculants. The percentages of the water turbidity removal for each of backbones are 93.6% (taro starch, 91.2% (cassava starch, 95.3% (modified taro starch and 94.1% (modified cassava starch. It can be highlighted that the modified taro starch exhibited the best performance in water turbidity removal up to 95%.

  17. Processing of cassava to produce ethanol - effect of raw material preparation

    Energy Technology Data Exchange (ETDEWEB)

    Greenfield, P.F.; Brooks, R.B.

    1982-06-01

    The effect of disintegration severity on starch hydrolysis and ethanol production from cassava roots and stems has been evaluated. It was found that a considerable fraction of the starch in the roots was made available for hydrolysis with relatively crude processing; all such material was readily fermented. To achieve a very high fermentables yield, either very intensive processing or, preferably, a two stage process, with the second stage being applied only to the oversize material, is required. Whether it is economically viable to process the oversize material further depends on a number of site-specific factors. The two stage option appears the more attractive alternative especially in small to medium size cassava to ethanol plants because of the need to minimise power requirements and thereby steam usage.

  18. Cloning and characterization of a tuberous root-specific promoter from cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Koehorst-van Putten, Herma J J; Wolters, Anne-Marie A; Pereira-Bertram, Isolde M; van den Berg, Hans H J; van der Krol, Alexander R; Visser, Richard G F

    2012-12-01

    In order to obtain a tuberous root-specific promoter to be used in the transformation of cassava, a 1,728 bp sequence containing the cassava granule-bound starch synthase (GBSSI) promoter was isolated. The sequence proved to contain light- and sugar-responsive cis elements. Part of this sequence (1,167 bp) was cloned into binary vectors to drive expression of the firefly luciferase gene. Cassava cultivar Adira 4 was transformed with this construct or a control construct in which the luciferase gene was cloned behind the 35S promoter. Luciferase activity was measured in leaves, stems, roots and tuberous roots. As expected, the 35S promoter induced luciferase activity in all organs at similar levels, whereas the GBSSI promoter showed very low expression in leaves, stems and roots, but very high expression in tuberous roots. These results show that the cassava GBSSI promoter is an excellent candidate to achieve tuberous root-specific expression in cassava.

  19. Conversion of cassava wastes for biofertilizer production using phosphate solubilizing fungi.

    Science.gov (United States)

    Ogbo, Frank C

    2010-06-01

    Two fungi characterized as Aspergillus fumigatus and Aspergillus niger, isolated from decaying cassava peels were used to convert cassava wastes by the semi-solid fermentation technique to phosphate biofertilizer. The isolates solubilized Ca(3)(PO(4))(2), AlPO(4) and FePO(4) in liquid Pikovskaya medium, a process that was accompanied by acid production. Medium for the SSF fermentation was composed of 1% raw cassava starch and 3% poultry droppings as nutrients and 96% ground (0.5-1.5mm) dried cassava peels as carrier material. During the 14days fermentation, both test organisms increased in biomass in this medium as indicated by increases in phosphatase activity and drop in pH. Ground cassava peels satisfied many properties required of carrier material particularly in respect of the organisms under study. Biofertilizer produced using A. niger significantly (p<.05) improved the growth of pigeon pea [Cajanus cajan (L.) Millsp.] in pot experiments but product made with A. fumigatus did not. Copyright 2009 Elsevier Ltd. All rights reserved.

  20. Cassava processors' awareness of occupational and environmental ...

    African Journals Online (AJOL)

    Cassava processors' awareness of occupational and environmental hazards ... Majority of the respondents also complained of lack of water (78.4%), lack of ... so as to reduce the problems faced by cassava processors during processing.

  1. Fungal enrichment of cassava peels proteins

    African Journals Online (AJOL)

    hope&shola

    2006-02-02

    Feb 2, 2006 ... 1Department of Food Biotechnology, University of Technology, ... About 60% of the cassava produced all over the world is used for human consumption. ... utilization of agro-industrial residues such as cassava peels waste.

  2. Expression Profiling of Cassava Storage Roots Reveals an Active Process of Glycolysis/Gluconeogenesis

    Institute of Scientific and Technical Information of China (English)

    Jun Yang; Dong An; Peng Zhang

    2011-01-01

    Mechanisms related to the development of cassava storage roots and starch accumulation remain largely unknown. To evaluate genome-wide expression patterns during tuberization, a 60 mer oligonucleotide microarray representing 20 840 cassava genes was designed to identify differentially expressed transcripts in fibrous roots, developing storage roots and mature storage roots. Using a random variance model and the traditional twofold change method for statistical analysis, 912 and 3 386 upregulated and downregulated genes related to the three developmental phases were identified. Among 25 significantly changed pathways identified, glycolysislgluconeogenesis was the most evident one. Rate-limiting enzymes were identified from each individual pathway, for example, enolase, L-lactate dehydrogenase and aldehyde dehydrogenase for glycolysis/gluconeogenesis, and ADP-glucose pyrophosphorylase, starch branching enzyme and glucan phosphorylase for sucrose and starch metabolism. This study revealed that dynamic changes in at least 16% of the total transcripts, including transcription fac-tors, oxidoreductasesltransferaseslhydrolases, hormone-related genes, and effectors of homeostasis. The reliability of these differentially expressed genes was verified by quantitative real-time reverse transcription-polymerase chain reaction. These studies should facilitate our understanding of the storage root formation and cassava improvement.

  3. An evaluation of cassava, sweet potato and field corn as potential carbohydrate sources for bioethanol production in Alabama and Maryland

    Energy Technology Data Exchange (ETDEWEB)

    Ziska, Lewis H.; Tomecek, Martha; Sicher, Richard [United States Department of Agriculture, Agricultural Research Service, Crop Systems and Global Change Lab, 10300 Baltimore Avenue, Building 1, Beltsville, MD 20705 (United States); Runion, G. Brett; Prior, Stephen A.; Torbet, H. Allen [United States Department of Agriculture, Agricultural Research Service, National Soil Dynamics Laboratory, 411 South Donahue Drive, Auburn, AL 36832 (United States)

    2009-11-15

    The recent emphasis on corn production to meet the increasing demand for bioethanol has resulted in trepidation regarding the sustainability of the global food supply. To assess the potential of alternative crops as sources of bioethanol production, we grew sweet potato (Ipomoea batatas) and cassava (Manihot esculentum) at locations near Auburn, Alabama and Beltsville, Maryland in order to measure root carbohydrate (starch, sucrose, glucose) and root biomass. Averaged for both locations, sweet potato yielded the highest concentration of root carbohydrate (ca 80%), primarily in the form of starch (ca 50%) and sucrose (ca 30%); whereas cassava had root carbohydrate concentrations of (ca 55%), almost entirely as starch. For sweet potato, overall carbohydrate production was 9.4 and 12.7 Mg ha{sup -1} for the Alabama and Maryland sites, respectively. For cassava, carbohydrate production in Maryland was poor, yielding only 2.9 Mg ha{sup -1}. However, in Alabama, carbohydrate production from cassava averaged {proportional_to}10 Mg ha{sup -1}. Relative to carbohydrate production from corn in each location, sweet potato and cassava yielded approximately 1.5 x and 1.6 x as much carbohydrate as corn in Alabama; 2.3 x and 0.5 x for the Maryland site. If economical harvesting and processing techniques could be developed, these data suggest that sweet potato in Maryland, and sweet potato and cassava in Alabama, have greater potential as ethanol sources than existing corn systems, and as such, could be used to replace or offset corn as a source of biofuels. (author)

  4. Development of cassava cake enriched with its own bran and Spirulina platensis - doi: 10.4025/actascitechnol.v34i4.10687

    Directory of Open Access Journals (Sweden)

    Meire Franci Polonio Navacchi

    2012-10-01

    Full Text Available The cassava cake was developed enriching it with a biomass of Spirulina platensis and a type of bran made out of its own starch. This biomass, a part from being rich in protein, also contains vitamins, essential fatty acids and minerals. Around Umuarama, in the State of Paraná, there is an agricultural/industrial complex annually producing and processing tons of cassava. Baked goods can be elaborated based in cassava as a way to expand the use of this raw material and to produce food free of gluten to celiac people. In this complex a solid byproduct is generated, which is rich in starch and fibres, and because of its low commercial value it is used for animal feed or discarded. The bran was dehydrated and analysed microbiologically as well as physically and chemically so as to be used in applied research. Developed energetic food based on cassava lacks protein, but this can be supplied by adding the biomass of Spirulina platensis. Different formulations of this cassava cake were developed varying the concentration of Spirulina platensis and cassava bran. The formulation that presented the best features received chocolate before being submitted to sensory tests by children in the public education system. The results show an excellent acceptance which made viable the development of this product because of aspects like nutrition, technology and sensorial.

  5. Identification, isolation and quantification of representative bacteria from fermented cassava dough using an integrated approach of culture-dependent and culture-independent methods.

    Science.gov (United States)

    Miambi, Edouard; Guyot, Jean-Pierre; Ampe, Frédéric

    2003-04-25

    The use of denaturing gradient gel electrophoresis (DGGE) and traditional culture-depending methods for examining the bacterial community of traditional cassava starch fermentation were investigated. It appeared that DGGE profiles of total DNA of cassava dough exhibited 10 distinguishable bands. In contrast, DGGE fingerprints of bacteria recovered from enrichment cultures of fermented dough gave variable profiles containing fewer bands. Bands corresponding to five bacterial species detected by direct PCR-DGGE of total DNA from of cassava dough were also observed in DGGE patterns of enrichment cultures. Eighteen strains were isolated from cultures selected on the basis of their DGGE banding patterns. Assessment of bacterial identification by 16S rDNA sequence similarity revealed that band comigration implied sequence identity. Comparison of 16S rDNA sequences of excised DGGE bands and recovered pure culture isolates with those in GENBANK and the RDP databases revealed that representative bacteria of fermented cassava dough were Lactobacillus and Pediococcus species as well as species of Clostridium, Propionibacterium and Bacillus. Some Lactobacillus species detected in dough samples by sequence analysis of DGGE bands were not recovered in any of the five culture media and conditions used. On the other hand, some species recovered as pure cultures from enrichments were not detected by direct DGGE analysis of total bacterial DNA from cassava dough. Our results provide evidence of the necessity to combine both culture-dependent and culture-independent methods for better description of microbial communities in indigenous cassava starch fermentations.

  6. Influence of some formulation and process parameters on the stability of lysozyme incorporated in corn flour- or corn starch-based extruded materials prepared by melt blending processing.

    Science.gov (United States)

    Jbilou, Fouzia; Galland, Sophie; Telliez, Camille; Akkari, Zied; Roux, Roselyne; Oulahal, Nadia; Dole, Patrice; Joly, Catherine; Degraeve, Pascal

    2014-12-01

    In order to obtain an antimicrobial biodegradable material, corn flour was extruded with 1% of lysozyme. Since the limited stability of natural preservatives such as lysozyme is a common bottleneck to the elaboration of active biomaterials by melt blending processes, the influence of formulation and of extrusion processing temperature on its residual enzymatic activity was investigated. To assess the contribution of process parameters such as temperature, shear stress and of related formulation parameters such as glycerol and moisture contents, the stability of lysozyme following its extrusion or its thermoforming with plasticized corn starch or thermal treatments in aqueous glycerol solutions was also studied. Increasing glycerol content from 25% to 30% significantly limited inactivation of lysozyme during extrusion, while increasing initial moisture content of the mixture from 14.5% to 28.5% had the opposite effect. These observations open the possibility to prepare active materials retaining more than 60±7% of initial lysozyme activity.

  7. Encapsulation altered starch digestion: toward developing starch-based delivery systems.

    Science.gov (United States)

    Janaswamy, Srinivas

    2014-01-30

    Starch is an abundant biomaterial that forms a vital energy source for humans. Altering its digestion, e.g. increasing the proportions of slowly digestible starch (SDS) and resistant starch (RS), would revolutionize starch utility in addressing a number of health issues related to glucose absorption, glycemic index and colon health. The research reported in this article is based on my hypothesis that water channels present in the B-type starch crystalline matrix, particularly in tuber starches, can embed guest molecules such as nutraceuticals, drugs, flavor compounds and vitamins leading to altered starch digestion. Toward this goal, potato starch has been chosen as the model tuber starch, and ibuprofen, benzocaine, sulfapyridine, curcumin, thymol and ascorbic acid as model guest molecules. X-ray powder diffraction and FT-IR analyses clearly suggest the incorporation of guest molecules in the water channels of potato starch. Furthermore, the in vitro digestion profiles of complexes are intriguing with major variations occurring after 60 min of starch digestion and finally at 120 min. These changes are concomitantly reflected in the SDS and RS amounts, with about 24% decrease in SDS for benzocaine complex and 6% increase in RS for ibuprofen complex, attesting the ability of guest molecule encapsulation in modulating the digestion properties of potato starch. Overall, this research provides an elegant opportunity for the design and development of novel starch-based stable carriers that not only bestow tailored glucose release rates but could also transport health promoting and disease preventing compounds.

  8. Simultaneous non-thermal saccharification of cassava pulp by multi-enzyme activity and ethanol fermentation by Candida tropicalis.

    Science.gov (United States)

    Rattanachomsri, Ukrit; Tanapongpipat, Sutipa; Eurwilaichitr, Lily; Champreda, Verawat

    2009-05-01

    Cassava pulp, a solid by-product from starch processing, is a promising and underused biomass that can be converted to biofuels and other value-added bio-products. In this study, an alternative cassava pulp saccharification process, which utilizes the multi-activity enzyme from Aspergillus niger BCC17849 and obviates the need for a pre-gelatinization step, was developed. The crude multi-enzyme composed of non-starch polysaccharide hydrolyzing enzyme activities, including cellulase, pectinase and hemicellulase act cooperatively to release the trapped starch granules from the fibrous cell wall structure for subsequent saccharification by raw starch degrading activity. A high yield of fermentable sugars, equivalent to 716 mg glucose and 67 mg xylose/g of cassava pulp, was obtained after 48 h incubation at 40 degrees C and pH 5 using the multi-enzyme, which was greater than the yield obtained from the optimized combinations of the corresponding commercial enzymes. The multi-enzyme saccharification reaction can be performed simultaneously with the ethanol fermentation process using a thermotolerant yeast Candida tropicalis BCC7755. The combined process produced 14.3 g/l ethanol from 4% (w/v) cassava pulp after 30 h of fermentation. The productivity rate of 0.48 g/l/h is equivalent to 93.7% of the theoretical yield based on total starch and cellulose, or 85.4% based on total fermentable sugars. The non-thermal enzymatic saccharification process described is more energy efficient and yields more fermentable sugar than the conventional enzymatic process. Furthermore, the process is applicable for production of various bio-products of economic importance.

  9. Analysis of sources of information for Improved Cassava Production ...

    African Journals Online (AJOL)

    ... Cassava Production Technology (ICPTS) in Biase Local Government Area, ... of new technologies in cassava production, high cost of fertilizers, high cost of ... pave a way to increase cassava production and farm income of stakeholders.

  10. An Automated Cassava Peeling System for the Enhancement of ...

    African Journals Online (AJOL)

    An Automated Cassava Peeling System for the Enhancement of Food Security in ... However, of all the unit operations involved in cassava processing, cassava ... machine was thus developed in the Department of Agricultural Engineering, ...

  11. Effect of Cassava Flour Characteristics on Properties of Cassava-Wheat-Maize Composite Bread Types

    Directory of Open Access Journals (Sweden)

    Maria Eduardo

    2013-01-01

    Full Text Available Replacement of wheat flour by other kinds of flour in bread making is economically important in South East Africa as wheat is mainly an imported commodity. Cassava is widely available in the region, but bread quality is impaired when large amounts of cassava are used in the bread formulation. Effect of differently processed cassavas (sun-dried, roasted and fermented on composite cassava-wheat-maize bread quality containing cassava levels from 20 to 40% (w/w was evaluated in combination with high-methylated pectin (HM-pectin added at levels of 1 to 3% (w/w according to a full factorial design. Addition of pectin to cassava flour made it possible to bake bread with acceptable bread quality even at concentration as high as 40%. In addition to cassava concentration, the type of cassava flour had the biggest effect on bread quality. With high level of cassava, bread with roasted cassava had a higher volume compared with sun-dried and fermented. The pectin level had a significant effect on improving the volume in high level roasted cassava bread. Crumb firmness similar to wheat bread could be obtained with sun-dried and roasted cassava flours. Roasted cassava bread was the only bread with crust colour similar to wheat bread.

  12. Sensorial evolution of cassava flour (Manihot esculenta crantz) added to protein concentrate cassava leaves.

    Science.gov (United States)

    Lima, Elaine C S; Feijo, Márcia B S; Freitas, Maria C J; Dos Santos, Edna R; Sabaa-Srur, Armando U O; Moura, Luciana S M

    2013-09-01

    Cassava is regarded as the nutritional base of populations in developing countries, and flour, product made of cassava, is the most consumed in the world. The cassava leaves are very rich in vegetable proteins, but a big amount is lost in processing the crop. The objective of this study was to do a sensory evaluation of cassava flour to which a protein concentrate obtained from cassava leaves (CPML) was added. The CPML was obtained from cassava leaves by isoelectric precipitation and added to cassava paste for preparation of flour in three parts 2.5, 5, and 10%. The acceptance test was done by 93 consumers of flour, using hedonic scale of 7 points to evaluate characteristics like color, scent, flavor, bitterness, texture, and overall score. By the method of quantitative descriptive analysis (QDA), eight trained tasters evaluated the following characteristics: whitish color, greenish color, cassava flavor, bitter flavor, characteristic flavor, lumpiness, raw texture, leaf scent, and cassava scent. The acceptability test indicated that flour cassava with 2.5 was preferred. Whitish color, greenish color, cassava flavor, bitter flavor, salty flavor, characteristic flavor, lumpiness texture, raw texture, and the smell of the leaves and cassava flour were the main descriptors defined for flour cassava with CPML has better characteristics.

  13. RESPONSE OF NIGERIAN CASSAVA EXPANSION INITIATIVES TO CLIMATE CHANGES, ECONOMIC GROWTH AND SOME POLICY INSTRUMENT (1970-2012

    Directory of Open Access Journals (Sweden)

    Onwumere Joseph

    2013-10-01

    Full Text Available This study considered the limiting response of Nigeria cassava expansion initiative to climate changes, economic growth and some policy instruments. The presidential initiative to make cassava a foreign exchange earner as well as ensuring that national demand are satisfied has made cassava a significant economic crop and resource input of industrial and international status. Currently, its derivatives such as animal feed, starch, ethanol, cassava chip, cassava flour, cassava liquor etc are in high demand. Having gained international recognition some factors need be examined to ascertain the limiting response of this economic crop some exogenous factors. The specific objectives of interest were to ascertain the response of cassava output expansion to rainfall, temperature, imports, exports, credit allocation to agribusiness, exchange rate, nominal interest rate, inflation and GDP from 1970 – 2012. Also, it examined the short and long run effects of these variables to cassava output so as to know how much adjustment it makes to reach the equilibrium. Secondary data were used for this research work. The technique of data analysis was auto- regressive modeling regression. To capture the long run and short run dynamics of cassava output behavior, the error correction model (ECM using the Engle-Granger methodology was adopted. The result revealed a very high rate of adjustment to long run equilibrium and the variables are correlated which means that impact of each variable on cassava output behavior in the economy is inseparable. The Error correction coefficient of -0.975 measures the speed of adjustment towards long run equilibrium earned the expected negative sign and is statistically significant at 1% risk level. Thus, this study recommends that the emerging cassava economy of Nigeria would be adequately empowered for efficient productivity if the Government stipulate policies that will encourage domestic output expansion to meet the national and

  14. Cassava virus diseases: biology, epidemiology, and management.

    Science.gov (United States)

    Legg, James P; Lava Kumar, P; Makeshkumar, T; Tripathi, Leena; Ferguson, Morag; Kanju, Edward; Ntawuruhunga, Pheneas; Cuellar, Wilmer

    2015-01-01

    Cassava (Manihot esculenta Crantz.) is the most important vegetatively propagated food staple in Africa and a prominent industrial crop in Latin America and Asia. Its vegetative propagation through stem cuttings has many advantages, but deleteriously it means that pathogens are passed from one generation to the next and can easily accumulate, threatening cassava production. Cassava-growing continents are characterized by specific suites of viruses that affect cassava and pose particular threats. Of major concern, causing large and increasing economic impact in Africa and Asia are the cassava mosaic geminiviruses that cause cassava mosaic disease in Africa and Asia and cassava brown streak viruses causing cassava brown streak disease in Africa. Latin America, the center of origin and domestication of the crop, hosts a diverse set of virus species, of which the most economically important give rise to cassava frog skin disease syndrome. Here, we review current knowledge on the biology, epidemiology, and control of the most economically important groups of viruses in relation to both farming and cultural practices. Components of virus control strategies examined include: diagnostics and surveillance, prevention and control of infection using phytosanitation, and control of disease through the breeding and promotion of varieties that inhibit virus replication and/or movement. We highlight areas that need further research attention and conclude by examining the likely future global outlook for virus disease management in cassava.

  15. EXPLORING OPTIMAL FEED TO MICROBES RATIO FOR ANAEROBIC ACIDOGENIC FERMENTATION OF CASSAVA RESIDUE FROM BREWERY

    Directory of Open Access Journals (Sweden)

    Xinying Wang,

    2012-01-01

    Full Text Available Cassava residue from breweries is being generated in large amounts in Guangxi Province of China, and this has potential to cause serious environmental problems if disposed of improperly. Two-stage anaerobic fermentation is a promising method for the treatment of such residue. In this study, the effect of feed to microbes ratio (F/M ratio on the anaerobic acidogenic fermentation of cassava residue was studied to determine the optimal F/M ratio and to maximize the performance in a subsequent methanogenic stage. The experiments were carried out at the F/M ratios of 0.2, 0.61, 1.02, 2.05, 3.07, and 4.09 g cassava-TS/g sludge-VSS in six laboratory-scale, completely stirred, tank reactors (CSTR at mesophilic temperature (35°C. An F/M ratio of 1.02 g cassava-TS/g sludge-VSS resulted in the highest solid removal efficiency and VFA/COD ratio, while starch removal efficiency was still near 100 percent, and acidification was relatively high. As a further benefit, the VFA distribution was more suitable for the subsequent methanogenic fermentation stage.

  16. Bulk H analysis using neutrons for routine quality control of cassava and products

    Energy Technology Data Exchange (ETDEWEB)

    Jonah, S.A., E-mail: jonahsa2001@yahoo.co [Centre for Energy Research and Training, Ahmadu Bello University, Zaria (Nigeria); Okunade, I.O. [Centre for Energy Research and Training, Ahmadu Bello University, Zaria (Nigeria); Abolude, O. [Department of Physics, Ahmadu Bello University, Zaria (Nigeria); Onyike, E.; Inuwa, I.M. [Department of Biochemistry, Ahmadu Bello University, Zaria (Nigeria)

    2011-07-15

    Nuclear and related techniques are useful in addressing the issues of food security and safety facing the world today, via quality control of raw materials and products. In this work, experimental investigations were performed to assess the use of total hydrogen content in cassava and products as a quality control indicator of starch and cyanide contents. The work was carried out using a neutron reflection facility at the Centre for Energy Research and Training, Ahmadu Bello University, Zaria, Nigeria. Cassava samples and products were obtained from retail outlets of Ibadan, Umudike and Zaria, representing three major regions of Nigeria. In general, data obtained indicate a total hydrogen content range of 4.47{+-}0.11-10.71{+-}0.27 wt% for the various samples, including raw, dry and processed cassava. Results show that samples having low hydrogen content are generally rich in cyanide compounds and demonstrate an inverse relationship between hydrogen content and cyanide content. The implication of this is that the neutron reflection facility can be used as a quality control setup for routine determination of hydrogen as an indicator of the cyanide content in cassava and products.

  17. apple juice's clarification process by using cassava and rice starch

    African Journals Online (AJOL)

    SARAH

    2015-11-30

    Nov 30, 2015 ... vegetable juices includes steps like extraction, clarification, and stabilization .... given by INRAB. Methods. Juice extraction: The collected cashew fruits were ...... Clarification, Preservation and Shelf Life. Evaluation of Cashew ...

  18. Biogas Production Using Anaerobic Biodigester from Cassava Starch Effluent

    OpenAIRE

    Sunarso, S.; B Budiyono; Siswo Sumardiono

    2010-01-01

    IKMs’ factory activity in Margoyoso produces liquid and solid wastes. The possible alternative was to use the liquid effluent as biogas raw material. This study focuses on the used of urea, ruminant, yeast, microalgae, the treatment of gelled and ungelled feed for biogas production, pH control during biogas production using buffer Na2CO3, and feeding management in the semi-continuous process of biogas production that perform at ambient temperature for 30 days. Ruminant bacteria, yeast, urea, ...

  19. PHYSICOCHEMICAL CHARACTERIZATION OF NATURAL AND ACETYLATED THERMOPLASTIC CASSAVA STARCH

    Directory of Open Access Journals (Sweden)

    JOSE MINA

    2011-01-01

    Full Text Available Almidón de Yuca natural y acetilado fueron plastifi cados empleando un extrusor de doble husillo y almacenados a 25 °C y 54 % de humedad relativa. El índice de cristalinidad, estimado como el cociente de las bandas de FTIR a 1047 (fase cristalina y a 1022 cm-1 (fase amorfa disminuyó en ambos almidones debido al proceso de plastifi cación. Mediante las micrografías de SEM se pudo observar que el proceso de plastifi cación destruyó casi por completo la estructura granular de los almidones. Los resultados de TGA mostraron que la energía de activación, Ea, disminuyó con el proceso de plastifi cación. Por otra parte se encontró que el almidón termoplástico acetilado presentó una Tg, absorción de agua y resistencia a tensión menores en comparación con el almidón termoplástico natural, mientras que su elongación a la ruptura fue mayor. Este comportamiento sugirió que la esterifi cación de los grupos hidroxilos del almidón natural redujeron las interacciones entre las cadenas del almidón plastifi cado.

  20. Substituição do milho pelo resíduo de fecularia de mandioca sobre o desempenho, digestibilidade e características de carcaça de novilhos confinados - DOI: 10.4025/actascianimsci.v31i4.6093 Replacing corn with cassava starch by-products on the performance, digestibility and carcass characteristics of bulls in confinement - DOI: 10.4025/actascianimsci.v31i4.6093

    Directory of Open Access Journals (Sweden)

    Maribel Velandia Valero

    2009-10-01

    Full Text Available O efeito de substituição do milho pelo resíduo desidratado de fecularia de mandioca (0; 12,5; 22,8 e 32,7% foi avaliado sobre o desempenho, a digestibilidade e características de carcaça e 32 bovinos mestiços (½ Nelore x ½ Angus de aproximadamente 18 meses de idade e 380 kg de peso vivo. O delineamento experimental foi o inteiramente casualizado, com quatro tratamentos e oito repetições. Foram analisados o ganho médio diário (GMD, rendimento de carcaça (RC, espessura de gordura de cobertura (EGC, área de olho de lombo (AOL, comprimento de perna (CP, espessura de coxão (EC, ingestão de matéria seca (IMS, conversão alimentar (CA, digestibilidade total aparente da matéria seca (DAMS, matéria orgânica (DAMO, proteína bruta (DAPB, energia bruta (DAEB, fibra em detergente ácido (DAFDA e fibra em detergente neutro (DAFDN. O experimento foi desenvolvido durante um período de 56 dias, após 14 dias de adaptação. Os resultados de GMD, RC, CA, EGC, AOL, CP e EC não apresentaram diferenças (p > 0,05 entre os tratamentos. A IMS apresentou redução linear quando o milho foi substituído pelo resíduo desidratado de fecularia de mandioca. Os coeficientes de digestibilidade da MS, MO, PB, EB, FDN e FDA não variaram entre as rações experimentais.The effects of replacing corn with different levels of cassava starch by-products (0, 12.5, 22.8, and 32.7% were evaluated on performance, digestibility and carcass traits of feedlot bulls. Thirty-two crossbred bulls (½ Nelore x ½ Angus around 18 months of age and 380 kg of body weight were used. A completely randomized design was used, with 4 treatments and 8 replicates. Evaluated traits were: average daily gain (ADG, carcass dressing (CD, backfat thickness (BT, Longissimus area (LDA, leg length (LL and cushion thickness (CT, dry matter intake (DMI, feed conversion ratio (FCR, total apparent digestibility of dry matter (DMDC, organic matter (OMDC, crude protein (CPDC, crude energy (CEDC

  1. The role of ascorbate peroxidase, guaiacol peroxidase, and polysaccharides in cassava (Manihot esculenta Crantz) roots under postharvest physiological deterioration.

    Science.gov (United States)

    Uarrota, Virgílio Gavicho; Moresco, Rodolfo; Schmidt, Eder Carlos; Bouzon, Zenilda Laurita; Nunes, Eduardo da Costa; Neubert, Enilto de Oliveira; Peruch, Luiz Augusto Martins; Rocha, Miguel; Maraschin, Marcelo

    2016-04-15

    This study aimed to investigate the role of ascorbate peroxidase (APX), guaiacol peroxidase (GPX), polysaccharides, and protein contents associated with the early events of postharvest physiological deterioration (PPD) in cassava roots. Increases in APX and GPX activity, as well as total protein contents occurred from 3 to 5 days of storage and were correlated with the delay of PPD. Cassava samples stained with Periodic Acid-Schiff (PAS) highlighted the presence of starch and cellulose. Degradation of starch granules during PPD was also detected. Slight metachromatic reaction with toluidine blue is indicative of increasing of acidic polysaccharides and may play an important role in PPD delay. Principal component analysis (PCA) classified samples according to their levels of enzymatic activity based on the decision tree model which showed GPX and total protein amounts to be correlated with PPD. The Oriental (ORI) cultivar was more susceptible to PPD.

  2. Status of cassava mosaic begomoviruses in farmers’ fields in Ghana

    Directory of Open Access Journals (Sweden)

    Stephen K. Torkpo

    2017-08-01

    Full Text Available A survey for cassava mosaic disease (CMD was carried out in Ghana from 2007−2008 to determine the status of cassava mosaic begomoviruses in farmers’ fields. The survey covered cassava growing areas in five major cassava producing regions of Ghana. Out of 136 fields visited, the plants in 5% were not affected by CMD, 18% contained plants with mild symptoms, whereas 77% had cassava with moderately severe or severe symptoms. A total of 412 cassava leaf samples and a symptomatic Manihot glaziovii sample were analyzed using polymerase chain reaction. African cassava mosaic virus (ACMV alone was detected in 42.0% of symptomatic cassava leaves with the remaining 58% being mixed infected by ACMV and East African cassava mosaic virus (EACMV. Mixed ACMV and EACMV infections were detected in symptomatic M. glaziovii, two non-symptomatic cassava samples and in individual whitefly vectors. EACMV was not detected alone in any cassava or whitefly sample. South African cassava mosaic virus (SACMV, Indian cassava mosaic virus (ICMV, East African cassava mosaic Zanzibar virus (EACMZV and the Uganda strain of EACMV were not detected in any cassava or whitefly sample. The occurrence of high proportion of mixed infections of cassava by cassava mosaic begomoviruses (CMBs, which could lead to emergence of new species or variants in the country, require concerted effort to mitigate the CMD problem.

  3. Potential of Starch Nanocomposites for Biomedical Applications

    Science.gov (United States)

    Zakaria, N. H.; Muhammad, N.; Abdullah, M. M. A. B.

    2017-06-01

    In recent years, the development of biodegradable materials from renewable sources based on polymeric biomaterials have grown rapidly due to increase environmental concerns and the shortage of petroleum sources. In this regard, naturally renewable polymers such as starch has shown great potential as environmental friendly materials. Besides, the unique properties of starch such as biodegradable and non-toxic, biocompatible and solubility make them useful for a various biomedical applications. Regardless of their unique properties, starch materials are known to have limitations in term of poor processability, low mechanical properties, poor long term stability and high water sensitivity. In order to overcome these limitations, the incorporation of nano size fillers into starch materials (nanocomposites) has been introduced. This review aims to give an overview about structure and characteristics of starch, modification of starch by nanocomposites and their potential for biomedical applications.

  4. Informal "seed" systems and the management of gene flow in traditional agroecosystems: the case of cassava in Cauca, Colombia.

    Science.gov (United States)

    Dyer, George A; González, Carolina; Lopera, Diana Carolina

    2011-01-01

    Our ability to manage gene flow within traditional agroecosystems and their repercussions requires understanding the biology of crops, including farming practices' role in crop ecology. That these practices' effects on crop population genetics have not been quantified bespeaks lack of an appropriate analytical framework. We use a model that construes seed-management practices as part of a crop's demography to describe the dynamics of cassava (Manihot esculenta Crantz) in Cauca, Colombia. We quantify several management practices for cassava--the first estimates of their kind for a vegetatively-propagated crop--describe their demographic repercussions, and compare them to those of maize, a sexually-reproduced grain crop. We discuss the implications for gene flow, the conservation of cassava diversity, and the biosafety of vegetatively-propagated crops in centers of diversity. Cassava populations are surprisingly open and dynamic: farmers exchange germplasm across localities, particularly improved varieties, and distribute it among neighbors at extremely high rates vis-à-vis maize. This implies that a large portion of cassava populations consists of non-local germplasm, often grown in mixed stands with local varieties. Gene flow from this germplasm into local seed banks and gene pools via pollen has been documented, but its extent remains uncertain. In sum, cassava's biology and vegetative propagation might facilitate pre-release confinement of genetically-modified varieties, as expected, but simultaneously contribute to their diffusion across traditional agroecosystems if released. Genetically-modified cassava is unlikely to displace landraces or compromise their diversity; but rapid diffusion of improved germplasm and subsequent incorporation into cassava landraces, seed banks or wild populations could obstruct the tracking and eradication of deleterious transgenes. Attempts to regulate traditional farming practices to reduce the risks could compromise cassava

  5. Informal "seed" systems and the management of gene flow in traditional agroecosystems: the case of cassava in Cauca, Colombia.

    Directory of Open Access Journals (Sweden)

    George A Dyer

    Full Text Available Our ability to manage gene flow within traditional agroecosystems and their repercussions requires understanding the biology of crops, including farming practices' role in crop ecology. That these practices' effects on crop population genetics have not been quantified bespeaks lack of an appropriate analytical framework. We use a model that construes seed-management practices as part of a crop's demography to describe the dynamics of cassava (Manihot esculenta Crantz in Cauca, Colombia. We quantify several management practices for cassava--the first estimates of their kind for a vegetatively-propagated crop--describe their demographic repercussions, and compare them to those of maize, a sexually-reproduced grain crop. We discuss the implications for gene flow, the conservation of cassava diversity, and the biosafety of vegetatively-propagated crops in centers of diversity. Cassava populations are surprisingly open and dynamic: farmers exchange germplasm across localities, particularly improved varieties, and distribute it among neighbors at extremely high rates vis-à-vis maize. This implies that a large portion of cassava populations consists of non-local germplasm, often grown in mixed stands with local varieties. Gene flow from this germplasm into local seed banks and gene pools via pollen has been documented, but its extent remains uncertain. In sum, cassava's biology and vegetative propagation might facilitate pre-release confinement of genetically-modified varieties, as expected, but simultaneously contribute to their diffusion across traditional agroecosystems if released. Genetically-modified cassava is unlikely to displace landraces or compromise their diversity; but rapid diffusion of improved germplasm and subsequent incorporation into cassava landraces, seed banks or wild populations could obstruct the tracking and eradication of deleterious transgenes. Attempts to regulate traditional farming practices to reduce the risks could

  6. Instant blend from cassava derivatives produced by extrusion

    Directory of Open Access Journals (Sweden)

    Fernanda Rossi Moretti Trombini

    2016-03-01

    Full Text Available ABSTRACT: The current research aimed to evaluate the effects of extrusion parameters on the physical characteristics of extruded blends of cassava leaf flour and starch. A factorial central composite design with four independent variables and the response surface methodology were used to evaluate the results of color parameters (L*, a*, b*, water absorption index, water solubility index and paste properties, according to the variations in the leaf flour percentage (1.5 to 7.5%, extrusion temperature (60 to 100ºC, screw speed (175 to 231rpm and moisture (20 to 30%. Extrusion conditions affect color, water absorption and water solubility indexes and paste properties of blends. The intermediate tested conditions of variable parameters lead to obtain extruded products with higher cold viscosity and water absorption index and light color, desirable qualities for rapid preparation products.

  7. Resistance to Sri Lankan Cassava Mosaic Virus (SLCMV) in Genetically Engineered Cassava cv. KU50 through RNA Silencing

    KAUST Repository

    Ntui, Valentine Otang

    2015-04-22

    Cassava ranks fifth among the starch producing crops of the world, its annual bioethanol yield is higher than for any other crop. Cassava cultivar KU50, the most widely grown cultivar for non-food purposes is susceptible to Sri Lankan cassava mosaic virus (SLCMV). The objective of this work was to engineer resistance to SLCMV by RNA interference (RNAi) in order to increase biomass yield, an important aspect for bioethanol production. Here, we produced transgenic KU50 lines expressing dsRNA homologous to the region between the AV2 and AV1 of DNA A of SLCMV. High level expression of dsRNA of SLCMV did not induce any growth abnormality in the transgenic plants. Transgenic lines displayed high levels of resistance to SLCMV compared to the wild-type plants and no virus load could be detected in uninoculated new leaves of the infected resistant lines after PCR amplification and RT-PCR analysis. The agronomic performance of the transgenic lines was unimpaired after inoculation with the virus as the plants presented similar growth when compared to the mock inoculated control plants and revealed no apparent reduction in the amount and weight of tubers produced. We show that the resistance is correlated with post-transcriptional gene silencing because of the production of transgene specific siRNA. The results demonstrate that transgenic lines exhibited high levels of resistance to SLCMV. This resistance coupled with the desirable yield components in the transgenic lines makes them better candidates for exploitation in the production of biomass as well as bioethanol.

  8. Resistance to Sri Lankan cassava mosaic virus (SLCMV in genetically engineered cassava cv. KU50 through RNA silencing.

    Directory of Open Access Journals (Sweden)

    Valentine Otang Ntui

    Full Text Available Cassava ranks fifth among the starch producing crops of the world, its annual bioethanol yield is higher than for any other crop. Cassava cultivar KU50, the most widely grown cultivar for non-food purposes is susceptible to Sri Lankan cassava mosaic virus (SLCMV. The objective of this work was to engineer resistance to SLCMV by RNA interference (RNAi in order to increase biomass yield, an important aspect for bioethanol production. Here, we produced transgenic KU50 lines expressing dsRNA homologous to the region between the AV2 and AV1 of DNA A of SLCMV. High level expression of dsRNA of SLCMV did not induce any growth abnormality in the transgenic plants. Transgenic lines displayed high levels of resistance to SLCMV compared to the wild-type plants and no virus load could be detected in uninoculated new leaves of the infected resistant lines after PCR amplification and RT-PCR analysis. The agronomic performance of the transgenic lines was unimpaired after inoculation with the virus as the plants presented similar growth when compared to the mock inoculated control plants and revealed no apparent reduction in the amount and weight of tubers produced. We show that the resistance is correlated with post-transcriptional gene silencing because of the production of transgene specific siRNA. The results demonstrate that transgenic lines exhibited high levels of resistance to SLCMV. This resistance coupled with the desirable yield components in the transgenic lines makes them better candidates for exploitation in the production of biomass as well as bioethanol.

  9. Resistance to Sri Lankan cassava mosaic virus (SLCMV) in genetically engineered cassava cv. KU50 through RNA silencing.

    Science.gov (United States)

    Ntui, Valentine Otang; Kong, Kynet; Khan, Raham Sher; Igawa, Tomoko; Janavi, Gnanaguru Janaky; Rabindran, Ramalingam; Nakamura, Ikuo; Mii, Masahiro

    2015-01-01

    Cassava ranks fifth among the starch producing crops of the world, its annual bioethanol yield is higher than for any other crop. Cassava cultivar KU50, the most widely grown cultivar for non-food purposes is susceptible to Sri Lankan cassava mosaic virus (SLCMV). The objective of this work was to engineer resistance to SLCMV by RNA interference (RNAi) in order to increase biomass yield, an important aspect for bioethanol production. Here, we produced transgenic KU50 lines expressing dsRNA homologous to the region between the AV2 and AV1 of DNA A of SLCMV. High level expression of dsRNA of SLCMV did not induce any growth abnormality in the transgenic plants. Transgenic lines displayed high levels of resistance to SLCMV compared to the wild-type plants and no virus load could be detected in uninoculated new leaves of the infected resistant lines after PCR amplification and RT-PCR analysis. The agronomic performance of the transgenic lines was unimpaired after inoculation with the virus as the plants presented similar growth when compared to the mock inoculated control plants and revealed no apparent reduction in the amount and weight of tubers produced. We show that the resistance is correlated with post-transcriptional gene silencing because of the production of transgene specific siRNA. The results demonstrate that transgenic lines exhibited high levels of resistance to SLCMV. This resistance coupled with the desirable yield components in the transgenic lines makes them better candidates for exploitation in the production of biomass as well as bioethanol.

  10. 不同淀粉对速冻卡通鸡块的品质影响研究%Study on effect of different starch on quality of quick-frozen cartoon chicken

    Institute of Scientific and Technical Information of China (English)

    王杨; 刘欣; 张萍

    2015-01-01

    以速冻卡通鸡块为研究对象,通过对比相同添加量的玉米淀粉、豌豆淀粉、马铃薯淀粉和木薯淀粉在对鸡块品质的影响发现:添加四种淀粉的产品在色泽、滋气味、手感和口感方面差异性不显著;在改善鸡块的弹性方面,木薯淀粉和马铃薯淀粉显著优于豌豆淀粉与玉米淀粉,其中木薯淀粉效果最好。%Quick-frozen cartoon chicken was taken as an object of study. The effects of different addition of the corn starch, pea starch, potato starch and cassava starch on the quality of chicken nuggets were compared. The results showed that there was no significant difference in color, smell, feel and taste of the products added with the four kinds of starches respectively. In the aspect of improving the elasticity of the chicken nuggets, cassava starch and potato starch were obviously better than the pea starch and corn starch. Among them the effect of cassava starch was best.

  11. Resistant starches.

    Science.gov (United States)

    Jenkins, D J; Kendall, C W

    2000-03-01

    Initially, it was hoped that resistant starches (ie, starches that enter the colon) would have clear advantages in the reduction of colon cancer risk and possibly the treatment of ulcerative colitis. Recent studies have confirmed the ability of resistant starch to increase fecal bulk, to increase the molar ratio of butyrate in relation to other short-chain fatty acids, and to dilute fecal bile acids. However, reduction in fecal ammonia, phenols, and N-nitroso compounds have not been achieved. At this point the picture from the standpoint of colon cancer risk reduction is not clear. Nevertheless, there is a fraction of what has been termed resistant starch (RS1), which enters the colon and acts as slowly digested, or lente, carbohydrate. Foods in this class are low glycemic index and have been shown to reduce the risk of chronic disease. They have been associated with systemic physiologic effects such as reduced postprandial insulin levels and higher high-density lipoprotein cholesterol levels. Consumption of low glycemic index foods has been shown to be related to a reduced risk of type 2 diabetes. Type 2 diabetes has in turn been related to a higher risk of colon cancer, especially colon cancer deaths. If carbohydrate has a protective role in colon cancer prevention, it may lie in the systemic effects of low glycemic index foods. The colonic advantages of different carbohydrates, therefore, remain to be documented. However, there is reason for optimism about the possible health advantages of so-called resistant starches that are slowly digested in the small intestine.

  12. CAMPURAN PULP TANDAN KOSONG KELAPA SAWIT DAN SELULOSA MIKROBIAL NATA DE CASSAVA DALAM PEMBUATAN KERTAS

    Directory of Open Access Journals (Sweden)

    Khaswar Syamsu

    2014-04-01

    Full Text Available Nowadays, forest-extracted wood cellulose still predominantly serves as raw material for pulp and paper manufacture in Indonesia. Consequently, the deforestation rate has alarmingly increased. The purpose of this research is to study the use of mixed microbial cellulose pulp from nata de cassava and pulp from empty oil palm fruit bunch (EOPFB for paper manufacture. In this research, pulp of nata de cassava’s microbial cellulose was mixed with EOPFB pulp at various proportions. Additives (i.e. 2% alum, 2.5% tapioca starch, and 5% kaolin were added to such mixture. Sheet forming without additives was made as a control. Addition of microbial cellulose tends to increase the physical and strength properties of paper and decrease the capability to absorb water significantly. The mixture of pulp of empty oil palm fruit bunch and microbial cellulose from nata de cassava has a potency to substitute wood pulp for paper manufacture.

  13. Culture conditions for yellow pigment formation byMonascus sp. KB 10 grown on cassava medium.

    Science.gov (United States)

    Yongsmith, B; Tabloka, W; Yongmanitchai, W; Bavavoda, R

    1993-01-01

    An isolate ofMonascus, from a commercial, fermented soybean curd (sufu) was grown on a cassava medium. With medium at an initial pH of 7.0 an orange-red pigmentation was produced but with an initial pH below 4, a light golden pigment was obtained. A medium containing, w/v, 3% cassava starch, 0.4% peptone and 0.1% glutamic acid, with an initial pH of 2.5 was optimal for the production of this yellow pigment, which had a single maximum absorption spectrum at 330 nm. The spectroscopic characterization of the purified yellow pigments demonstrated a monascin-ankaflavin-monascorubrin skeleton.

  14. Extraction and chemical characterization of starch from S. lycocarpum fruits.

    Science.gov (United States)

    Pascoal, Aline M; Di-Medeiros, Maria Carolina B; Batista, Karla A; Leles, Maria Inês Gonçalves; Lião, Luciano Moraes; Fernandes, Kátia F

    2013-11-06

    In this study the pulp from Solanum lycocarpum fruits was used as raw material for extraction of starch, resulting in a yield of 51%. The starch granules were heterogeneous in size, presenting a conical appearance, very similar to a high-amylose cassava starch. The elemental analysis (CHNS) revealed 64.33% carbon, 7.16% hydrogen and 0.80% nitrogen. FT-IR spectroscopy showed characteristic peaks of polysaccharides and NMR analysis confirmed the presence of the α-anomer of d-glucose. The S. lycocarpum starch was characterized by high value of intrinsic viscosity (3515 mPa s) and estimated molecular weight around 645.69 kDa. Furthermore, this starch was classified as a B-type and high amylose content starch, presenting 34.66% of amylose and 38% crystallinity. Endothermic transition temperatures (To=61.25 °C, Tp=64.5 °C, Tc=67.5 °C), gelatinization temperature (ΔT=6.3 °C) ranges and enthalpy changes (ΔH=13.21 J g(-1)) were accessed by DCS analysis. These results make the S. lycocarpum fruit a very promising source of starch for biotechnological applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Effect of coating preservation on storage quality of edible fresh cassava%涂膜保鲜对食用鲜木薯品质的影响

    Institute of Scientific and Technical Information of China (English)

    谢江; 查春月; 刘婷; 邓小顺; 古碧; 林莹

    2012-01-01

    In order to improve the quality of fresh cassava during stor age . the preservation effect of fresh cassavas, which was respectively coated with sodium alginate, chitosan, licjuid paraffin, was studied at normal atmospheric temperature. The moisture content, starch con-lent, reducing sugar content, respiration intensity- weight loss rate and decay rate of the fresh cassava were discussed during cassava storage. The results showed that, compared with control group, three kinds of coating pretreatment could reduce changes of quality of fresh cassava during storage at normal atmospheric temperature. A mo rig three kinds of coating pretrcatment, the liquid paraffin coating had the best effect for fresh-keeping of cassava. It could ohviousty inhibit the respiration, water loss, starch hydrolysis and reducing sugar produclion and reduce weight loss rate and decay rate of fresh cassava.%为了提高食用鲜木薯在贮藏期间的质量,研究海藻酸钠、壳聚糖和液体石蜡涂膜剂处理对鲜木薯常温下的贮藏保鲜效果的影响,探讨鲜木薯在贮藏过程中水分含量、淀粉含量、还原糖含量、呼吸强度、失重率和腐烂率的变化规律.结果表明:在常温条件下,和空白组相比3种涂膜剂均能减缓鲜木薯在贮藏期间的品质变化.3种涂膜剂中,液体石蜡的保鲜效果最佳,能明显抑制鲜木薯呼吸作用、水分的散失、淀粉的水解和还原糖的产生,减缓鲜木薯失重和腐烂.

  16. Development and utilization of cassava residue as feed resource%木薯渣作为饲料资源的开发与利用

    Institute of Scientific and Technical Information of China (English)

    黄萍; 齐仁立

    2012-01-01

    木薯渣是木薯加工过程中产生的下脚料,富含大量盼纤维和淀粉。近年来,木薯渣作为饲料资源进行开发和利用能够使其变废为宝。减少对环境的破坏,受到了国内外的普遍重视。其中微生物发酵处理能够使木薯渣的粗纤维降解,改善适口性,提高饲料转化率。本文就木薯渣的营养特点、加工处理和在畜禽养殖中的应用等作一概括和总结。%Cassava residue is the remainder of cassava starch. In recent years, cassava residue has been applied as utilization can increase the economic value of cassava residue The microbial fermentation is an ideal process to degradate processing, which the feed resource has rich fiber and for development. Its and reduce the damage to environment. the crude fiber in cassava residue and improve palatability as well as the feed conversion rate. This paper summarized the nutrition characteristic, the processing and the application in livestock and poultry of cassava residue

  17. Gluten-free dough-making of specialty breads: Significance of blended starches, flours and additives on dough behaviour.

    Science.gov (United States)

    Collar, Concha; Conte, Paola; Fadda, Costantino; Piga, Antonio

    2015-10-01

    The capability of different gluten-free (GF) basic formulations made of flour (rice, amaranth and chickpea) and starch (corn and cassava) blends, to make machinable and viscoelastic GF-doughs in absence/presence of single hydrocolloids (guar gum, locust bean and psyllium fibre), proteins (milk and egg white) and surfactants (neutral, anionic and vegetable oil) have been investigated. Macroscopic (high deformation) and macromolecular (small deformation) mechanical, viscometric (gelatinization, pasting, gelling) and thermal (gelatinization, melting, retrogradation) approaches were performed on the different matrices in order to (a) identify similarities and differences in GF-doughs in terms of a small number of rheological and thermal analytical parameters according to the formulations and (b) to assess single and interactive effects of basic ingredients and additives on GF-dough performance to achieve GF-flat breads. Larger values for the static and dynamic mechanical characteristics and higher viscometric profiles during both cooking and cooling corresponded to doughs formulated with guar gum and Psyllium fibre added to rice flour/starch and rice flour/corn starch/chickpea flour, while surfactant- and protein-formulated GF-doughs added to rice flour/starch/amaranth flour based GF-doughs exhibited intermediate and lower values for the mechanical parameters and poorer viscometric profiles. In addition, additive-free formulations exhibited higher values for the temperature of both gelatinization and retrogradation and lower enthalpies for the thermal transitions. Single addition of 10% of either chickpea flour or amaranth flour to rice flour/starch blends provided a large GF-dough hardening effect in presence of corn starch and an intermediate effect in presence of cassava starch (chickpea), and an intermediate reinforcement of GF-dough regardless the source of starch (amaranth). At macromolecular level, both chickpea and amaranth flours, singly added, determined

  18. Experimental study of bioethanol production using mixed cassava and durian seed

    Science.gov (United States)

    Seer, Q. H.; Nandong, J.; Shanon, T.

    2017-06-01

    The production of biofuels using conventional fermentation feedstocks, such as sugar-and starch-based agricultural crops will in the long-term lead to a serious competition with human-animal food consumption. To avoid this competition, it is important to explore various alternative feedstocks especially those from inedible waste materials. Potentially, fruit wastes such as damaged fruits, peels and seeds represent alternative cheap feedstocks for biofuel production. In this work, an experimental study was conducted on ethanol production using mixed cassava and durian seeds through fermentation by Saccharomyces cerevisiae yeast. The effects of pH, temperature and ratio of hydrolyzed cassava to durian seeds on the ethanol yield, substrate consumption and product formation rates were analyzed in the study. In flask-scale fermentation using the mixed cassava-durian seeds, it was found that the highest ethanol yield of 45.9 and a final ethanol concentration of 24.92 g/L were achieved at pH 5.0, temperature 35°C and 50:50 volume ratio of hydrolyzed cassava to durian seeds for a batch period of 48 hours. Additionally, the ethanol, glucose and biomass concentration profiles in a lab-scale bioreactor were examined for the fermentation using the proposed materials under the flask-scale optimum conditions. The ethanol yield of 35.7 and a final ethanol concentration of 14.61 g/L were obtained over a period of 46 hours where the glucose was almost fully consumed. It is worth noting that both pH and temperature have significant impacts on the fermentation process using the mixed cassava-durian seeds.

  19. Cultivation of oyster mushrooms on cassava waste

    NARCIS (Netherlands)

    Sonnenberg, A.S.M.; Baars, J.J.P.; Obodai, M.; Asagbra, A.

    2015-01-01

    Cassava is a major food crop for approximately 700 million people, especially in African countries. A large quantity of waste is produced during processing of cassava, mainly consisting of tuber peels. Although previous research has shown that these peels can be an ingredient for substrate to cultiv

  20. Antimicrobial nanostructured starch based films for packaging.

    Science.gov (United States)

    Abreu, Ana S; Oliveira, M; de Sá, Arsénio; Rodrigues, Rui M; Cerqueira, Miguel A; Vicente, António A; Machado, A V

    2015-09-20

    Montmorillonite modified with a quaternary ammonium salt C30B/starch nanocomposite (C30B/ST-NC), silver nanoparticles/starch nanocomposite (Ag-NPs/ST-NC) and both silver nanoparticles/C30B/starch nanocomposites (Ag-NPs/C30B/ST-NC) films were produced. The nanoclay (C30B) was dispersed in a starch solution using an ultrasonic probe. Different concentrations of Ag-NPs (0.3, 0.5, 0.8 and 1.0mM) were synthesized directly in starch and in clay/starch solutions via chemical reduction method. Dispersion of C30B silicate layers and Ag-NPs in ST films characterized by X-ray and scanning electron microscopy showed that the presence of Ag-NPs enhanced clay dispersion. Color and opacity measurements, barrier properties (water vapor and oxygen permeabilities), dynamic mechanical analysis and contact angle were evaluated and related with the incorporation of C30B and Ag-NPs. Films presented antimicrobial activity against Staphylococcus aureus, Escherichia coli and Candida albicans without significant differences between Ag-NPs concentrations. The migration of components from the nanostructured starch films, assessed by food contact tests, was minor and under the legal limits. These results indicated that the starch films incorporated with C30B and Ag-NPs have potential to be used as packaging nanostructured material. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Amphoteric Starch in Simultaneous Process Preparation with Box-Behnken Design for Optimal Conditions

    Directory of Open Access Journals (Sweden)

    Sopa Cansee

    2008-01-01

    Full Text Available Cassava starch was chemically modified to produce an amphoteric starch. The amphoteric starch was prepared in a simultaneous process which was evaluated in relation to four factors: temperature (45-55 °C, 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHPTAC, 4-12% and sodium tripolyphosphate (STP, 2-8% concentrations, and reaction time (2-6 h. The extent of amphoteric starch produced was determined by the degree of substitution (DS of the nitrogen content and percentage of phosphorus content. In addition, a quantitative response of yield and whiteness as well as pasting characteristics were tested. Response surface analysis showed that the DS (0.01-0.05 increased with increasing temperature, CHPTAC and reaction time. The phosphorus content (0.09-0.34% followed a parabolic shape with all of the factors. Consequently, the response surface methodology appears to be a powerful technique to determine the optimal conditions for the production of amphoteric starches.

  2. 黄姜渣提取淀粉的成分及颗粒结构分析%Analysis on the Composition and Structure of Starch Granules from Dioscorea zingibrensis

    Institute of Scientific and Technical Information of China (English)

    杨铖; 毛楠; 籍国东

    2011-01-01

    [Objective] The aim was to analyze the the composition and structure of starch granules from Dioscorea zingiberensis. [Method] High-quality Dioscorea zingiberensis starch was extracted from the residues of yellow ginger diosgenin processing by physical separation technology,and then the composition and structure of starch granules from Dioscorea zingiberensis was analyzed. [ Result ] The water content of Dioscorea zingiberensis starch was close to that of cassava starch; its starch purity was similar to those of cassava starch and potato starch in the market;its protein content was lower than that of cassava starch and potato starch,and lipid content was lower than that of potato starch, while its amylose content was higher than those of cassava starch and potato starch. So Dioscorea zingiberensis starch had better quality than cassava starch and potato starch. Dioscorea zingiberensis starch granules were caky ,had rough surface,larger and uniform sizes,and granules diameters were 15 -25 μm. Acid hydrolysis showed that the granule may be a hollow structure ,and the hollows alternately distributed in the crystalline region and amorphous region of the granule. [ Conclusion]The research provides reference for the application of Dioscorea zingiberensis in food industry.%[目的]分析黄姜渣提取淀粉的成分及颗粒结构.[方法]利用物理分离方法从黄姜生产皂素的废渣中提取优质黄姜淀粉,分析了其主要成分和颗粒结构.[结果]黄姜淀粉的含水量与木薯淀粉接近;其淀粉含量与木薯淀粉和马铃薯淀粉接近;其蛋白质含量低于其他2种淀粉;其脂肪含量低于马铃薯淀粉;其直链淀粉含量则高于其他2种淀粉,品质更优.SEM分析表明,黄姜淀粉颗粒呈饼状,表面较粗糙,颗粒较大且较均匀,粒径在15~25 μm.酸水解分析表明,黄姜淀粉颗粒可能为中空的,且在颗粒内部结晶区和无定形区是交替分布的.[结论]该研究为黄姜淀粉在食品行业的应用提供了参考.

  3. A novel process for direct production of acetone-butanol-ethanol from native starches using granular starch hydrolyzing enzyme by Clostridium saccharoperbutylacetonicum N1-4.

    Science.gov (United States)

    Thang, Vu Hong; Kobayashi, Genta

    2014-02-01

    In this work, a new approach for acetone-butanol-ethanol (ABE) production has been proposed. Direct fermentation of native starches (uncooked process) was investigated by using granular starch hydrolyzing enzyme (GSHE) and Clostridium saccharoperbutylacetonicum N1-4. Even the process was carried out under suboptimal condition for activity of GSHE, the production of ABE was similar with that observed in conventional process or cooked process in terms of final solvent concentration (21.3 ± 0.4 to 22.4 ± 0.4 g/L), butanol concentration (17.5 ± 0.4 to 17.8 ± 0.3 g/L) and butanol yield (0.33 to 0.37 g/g). The production of solvents was significantly dependent on the source of starches. Among investigated starches, corn starch was more susceptible to GSHE while cassava starch was the most resistant to this enzyme. Fermentation using native corn starch resulted in the solvent productivity of 0.47 g/L h, which was about 15 % higher than that achieved in cooked process. On the contrary, uncooked process using cassava and wheat starch resulted in the solvent productivity of 0.30 and 0.37 g/L h, which were respectively about 30 % lower than those obtained in cooked process. No contamination was observed during all trials even fermentation media were prepared without sterilization. During the fermentation using native starches, no formation of foam is observed. This uncooked process does not require cooking starchy material; therefore, the thermal energy consumption for solvent production would remarkably be reduced in comparison with cooked process.

  4. Aroma interactions with starch

    DEFF Research Database (Denmark)

    Jørgensen, Anders Dysted

    Starches are used to enhance aroma perception in low-fat foods. Aroma compounds can bind physically to the starch in grooves on the surface or they can form complexes inside amylose helices. This study has been divided into two parts: one part regarding binding of aromas to starches and their aroma......-release, and another part regarding stimulation of a fungal secretome using different carbohydrates. In the first part, nine aromas and one aroma-mixture were mixed with nine different starches, including genetically modified starches. The objective of this sub-project was to bind aromas to the starches to 15 weight......-percent. Aroma binding was tested on both amorphous starches and on native starch granules. A series of aldehydes and alcohols were also tested for binding to the starches. The aromas with the highest volatility were positively retained by starch, whereas for aromas with a lower volatility the starch had...

  5. Production of multiple extracellular enzyme activities by novel submerged culture of Aspergillus kawachii for ethanol production from raw cassava flour.

    Science.gov (United States)

    Sugimoto, Toshikazu; Makita, Tomohiro; Watanabe, Koutaro; Shoji, Hiroshi

    2012-04-01

    Cassava is a starch-containing root crop that is widely used as a raw material in a variety of industrial applications, most recently in the production of fuel ethanol. In the present study, ethanol production from raw (uncooked) cassava flour by simultaneous saccharification and fermentation (SSF) using a preparation consisting of multiple enzyme activities from Aspergillus kawachii FS005 was investigated. The multi-activity preparation was obtained from a novel submerged fermentation broth of A. kawachii FS005 grown on unmilled crude barley as a carbon source. The preparation was found to consist of glucoamylase, acid-stable α-amylase, acid carboxypeptidase, acid protease, cellulase and xylanase activities, and exhibited glucose and free amino nitrogen (FAN) production rates of 37.7 and 118.7 mg/l/h, respectively, during A. kawachii FS005-mediated saccharification of uncooked raw cassava flour. Ethanol production from 18.2% (w/v) dry uncooked solids of raw cassava flour by SSF with the multi-activity enzyme preparation yielded 9.0% (v/v) of ethanol and 92.3% fermentation efficiency. A feasibility study for ethanol production by SSF with a two-step mash using raw cassava flour and the multi-activity enzyme preparation manufactured on-site was verified on a pilot plant scale. The enzyme preparation obtained from the A. kawachii FS005 culture broth exhibited glucose and FAN production rates of 41.1 and 135.5 mg/l/h, respectively. SSF performed in a mash volume of about 1,612 l containing 20.6% (w/v) dry raw cassava solids and 106 l of on-site manufactured A. kawachii FS005 culture broth yielded 10.3% (v/v) ethanol and a fermentation efficiency of 92.7%.

  6. Characterization of an 18,166 EST dataset for cassava (Manihot esculenta Crantz) enriched for drought-responsive genes.

    Science.gov (United States)

    Lokko, Y; Anderson, J V; Rudd, S; Raji, A; Horvath, D; Mikel, M A; Kim, R; Liu, L; Hernandez, A; Dixon, A G O; Ingelbrecht, I L

    2007-09-01

    Cassava (Manihot esculenta Crantz) is a staple food for over 600 million people in the tropics and subtropics and is increasingly used as an industrial crop for starch production. Cassava has a high growth rate under optimal conditions but also performs well in drought-prone areas and on marginal soils. To increase the tools for understanding and manipulating drought tolerance in cassava, we generated expressed sequence tags (ESTs) from normalized cDNA libraries prepared from dehydration-stressed and control well-watered tissues. Analysis of a total of 18,166 ESTs resulted in the identification of 8,577 unique gene clusters (5,383 singletons and 3,194 clusters). Functional categories could be assigned to 63% of the unigenes, while another approximately 11% were homologous to hypothetical genes with unclear functions. The remaining approximately 26% were not significantly homologous to sequences in public databases suggesting that some may be novel and putatively specific to cassava. The dehydration-stressed library uncovered numerous ESTs with recognized roles in drought-responses, including those that encode late-embryogenesis-abundant proteins thought to confer osmoprotective functions during water stress, transcription factors, heat-shock proteins as well as proteins involved in signal transduction and oxidative stress. The unigene clusters were screened for short tandem repeats for further development as microsatellite markers. A total of 592 clusters contained 646 repeats, representing 3.3% of the ESTs queried. The ESTs presented here are the first dehydration stress transcriptome of cassava and can be utilized for the development of microarrays and gene-derived molecular markers to further dissect the molecular basis of drought tolerance in cassava.

  7. Cassava; African perspective on space agriculture

    Science.gov (United States)

    Katayama, Naomi; Njemanze, Philip; Nweke, Felix; Space Agriculture Task Force, J.; Katayama, Naomi; Yamashita, Masamichi

    Looking on African perspective in space agriculture may contribute to increase diversity, and enforce robustness for advanced life support capability. Cassava, Manihot esculentaand, is one of major crop in Africa, and could be a candidate of space food materials. Since resource is limited for space agriculture in many aspects, crop yield should be high in efficiency, and robust as well. The efficiency is measured by farming space and time. Harvest yield of cassava is about 41 MJ/ m2 (70 ton/ha) after 11 months of farming. Among rice, wheat, potato, and sweet potato, cassava is ranked to the first place (40 m2 ) in terms of farming area required to supply energy of 5 MJ/day, which is recommended for one person. Production of cassava could be made under poor condition, such as acidic soil, shortage of fertilizer, draught. Laterite, similar to Martian regolith. Propagation made by stem cutting is an advantage of cassava in space agriculture avoiding entomophilous or anemophilous process to pollinate. Feature of crop storage capability is additional factor that determines the efficiency in the whole process of agriculture. Cassava root tuber can be left in soil until its consumption. Cassava might be an African contribution to space agriculture.

  8. 木薯渣发酵饲料的工艺筛选%Screening of technology in cassava slag fermentation feed

    Institute of Scientific and Technical Information of China (English)

    艾必燕; 刘长忠; 陈建康; 杨扬; 米本中; 黄倩妮; 樵星芳

    2012-01-01

    Using cassava slag as the main raw material, with aspergillus, trichoderma viride and rhizopus R2 for fermentation strains, the test is to optimize cassava slag fermentation technology producing tropina feed. The appropriate conditions of cassava slag fermentation are that adding amount of liquid spawn is 3%, adding amount of nitrogen source is 10%, fermentation temperature is 37 ℃, fermentation time is 4 days. Cassava slag is a mixture, its highest level of non-nitrogen compounds is 78.7%, main component is soluble starch compounds (such as monosaccharide and starch), but its crude protein content is very low, amino acid composition is extremely uneven, it has poor effect to feed cassava slag directly, so most of the cassava slag cannot be used, which not only causes the waste of resources, but also seriously pollutes environment. Processing cassava slag into feed materials can make full use of the waste in starch industry, it is favorable to the environment protection, and it also can significantly reduce the cost of feed, improve the utilization value and economic benefits of cassava slag.%以木薯生产中产生的废渣为主要原料,以黑曲霉、绿色木霉和根霉R2为发酵菌种,优化木薯渣发酵生产菌体蛋白饲料的工艺.初步确定了木薯渣发酵的适宜条件,即液体菌种添加量为3%,氮源添加量为20%,发酵温度37℃,发酵时间为4d,经试验验证,此发酵条件下发酵饲料中粗蛋白含量较高,可达到蛋白饲料对蛋白质含量的要求.通过处理木薯渣变为动物的饲料原料,不仅可充分利用淀粉工业的废弃物,有利于环境保护,而且可显著降低饲养成本,从而提高了木薯渣的利用价值和经济效益.

  9. Cassava Processing: Safety and Protein Fortification

    OpenAIRE

    2012-01-01

    Cassava (Manihot esculenta Crantz) is an important and cheap source of carbohydrate in tropical regions, particularly in Sub-Sahara Africa. Cassava as a human food is a good source of energy as it has a comparable high energy density of about 610 kJ/100 g fresh root. The crop has growth advantages and production can take place in soil where other crops such as maize, sorghum and sweet potatoes cannot grow. In the region, cassava is used mainly by the farmers themselves as a subsistence crop b...

  10. Physicochemical properties of yam bean starch%凉薯淀粉的理化性质研究

    Institute of Scientific and Technical Information of China (English)

    张喻; 章丽琳; 曾嵘; 曾希珂

    2016-01-01

    The granular morphology and size,solubility,swelling power,pasting property and other physicochemical properties of starches from yam bean were analyzed by comparing the similarities and differences with corn,cassava and potato starches. The results indicated that most of yam bean starch granules were irregular polygon,and granule sizes were smaller than the other three kinds of starches, which varied from 3~11 μm with the average was 8 μm. The solubility and swelling power were higher than those of cassava and corn starches,but lower than those of potato starches,which increased with the rise of temperature. Gelatinization temperature of yam bean starch was 80 ℃,which was higher than the other three kinds of starches. Peak viscosities were less than those of potato and cassava starches, but higher than those of corn starches. Thermal stability of yam bean starches was the strongest. Aging abilities were stronger than those of potato and corn starches,but smaller than those of cassava starches. The transparency of yam bean starches was very low and it was easy to coagulation sink. The apparent viscosity of yam bean starches was small,showing the phenomenon of shear thinning. The freeze–thaw stability of yam bean starches was very bad. The gel hardness,chewiness,cohesion and adhesion of yam bean starches were far lower than those of potato and cassava starches,higher than those of corn starches and gel elasticity of yam bean were the lowest.%以玉米淀粉、木薯淀粉和马铃薯淀粉为对照,分析了凉薯淀粉的颗粒形貌及大小、溶解度、膨胀度和糊化特性等理化性质。结果表明:凉薯淀粉颗粒形状多为不规则多边形,少数为圆形,粒径范围为3~11μm,平均粒径为8μm,小于其他三种淀粉;溶解度和膨胀度比木薯淀粉和玉米淀粉高,比马铃薯淀粉低,且随温度升高,溶解度和膨胀度显著增大;糊化温度为80℃,高于其他三种淀粉,峰值黏度小于

  11. Comparasion of iles-iles and cassava tubers as a Saccharomyces cerevisiae substrate fermentation for bioethanol production

    Directory of Open Access Journals (Sweden)

    KUSMIYATI

    2010-01-01

    Full Text Available Kusmiyati (2010 Comparasion of iles-iles and cassava tubers as a Saccharomyces cerevisiae substrate fermentation for bioethanol production. Nusantara Bioscience 2: 7-13. The production of bioethanol increase rapidly because it is renewable energy that can be used to solve energy crisis caused by the depleting of fossil oil. The large scale production bioethanol in industry generally use feedstock such as sugarcane, corn, and cassava that are also required as food resouces. Therefore, many studies on the bioethanol process concerned with the use raw materials that were not competing with food supply. One of the alternative feedstock able to utilize for bioethanol production is the starchy material that available locally namely iles-iles (Amorphophallus mueller Blum. The contain of carbohydrate in the iles-iles tubers is around 71.12 % which is slightly lower as compared to cassava tuber (83,47%. The effect of various starting material, starch concentration, pH, fermentation time were studied. The conversion of starchy material to ethanol have three steps, liquefaction and saccharification were conducted using α-amylase and amyloglucosidase then fermentation by yeast S.cerevisiaie. The highest bioethanol was obtained at following variables starch:water ratio=1:4 ;liquefaction with 0.40 mL α-amylase (4h; saccharification with 0.40 mL amyloglucosidase (40h; fermentation with 10 mL S.cerevisiae (72h producing bioethanol 69,81 g/L from cassava while 53,49 g/L from iles-iles tuber. At the optimum condition, total sugar produced was 33,431 g/L from cassava while 16,175 g/L from iles-iles tuber. The effect of pH revealed that the best ethanol produced was obtained at pH 5.5 during fermentation occurred for both cassava and iles-iles tubers. From the results studied shows that iles-iles tuber is promising feedstock because it is producing bioethanol almost similarly compared to cassava.

  12. Adhesion of Vibrio cholerae to granular starches.

    Science.gov (United States)

    Gancz, Hanan; Niderman-Meyer, Orly; Broza, Meir; Kashi, Yechezkel; Shimoni, Eyal

    2005-08-01

    Cholera is a severe diarrheal disease caused by specific serogroups of Vibrio cholerae that are pathogenic to humans. Cholera can become epidemic and deadly without adequate medical care. Appropriate rehydration therapy can reduce the mortality rate from as much as 50% of the affected individuals to disease. To further reduce the symptoms associated with cholera, improvements in oral rehydration solution (ORS) by starch incorporation were suggested. Here, we report that V. cholerae adheres to starch granules incorporated in ORS. Adhesion of 98% of the cells was observed within 2 min when cornstarch granules were used. Other starches showed varied adhesion rates, indicating that starch source and composition play an important role in the interaction of V. cholerae and starch granules. Sugars metabolized by V. cholerae showed a repressive effect on the adhesion process. The possible mechanisms involved are discussed. Comparing V. cholerae adhesion with the adhesion of other pathogens suggests the involvement of starch degradation capabilities. This adhesion to granular starch can be used to improve ORT.

  13. Hyperphosphorylation of cereal starch

    DEFF Research Database (Denmark)

    Carciofi, Massimiliano; Shaik, Shahnoor Sultana; Jensen, Susanne Langgård

    2011-01-01

    Plant starch is naturally phosphorylated at a fraction of the C6 and the C3 hydroxyl groups during its biosynthesis in plastids. Starch phosphate esters are important in starch metabolism and they also generate specific industrial functionality. Cereal grains starch contains little starch bound......-type phenotype. Transgenic cereal grains synthesized starch with higher starch bound phosphate content (7.5 (±0.67) nmol/mg) compared to control lines (0.8 (±0.05) nmol/mg) with starch granules showing altered morphology and lower melting enthalpy. Our data indicate specific action of GWD during starch...... biosynthesis and demonstrates the possibility for in planta production of highly phosphorylated cereal starch....

  14. Cassava Pulp Hydrolysis under Microwave Irradiation with Oxalic Acid Catalyst for Ethanol Production

    Directory of Open Access Journals (Sweden)

    Euis Hermiati

    2014-07-01

    Full Text Available Microwave irradiation is an alternative method of starch hydrolysis that offers a rapid process. The aim of this research was to improve microwave-assisted hydrolysis of cassava pulp by using oxalic acid as a catalyst. Suspension of cassava pulp in 0.5% oxalic acid (1 g/20 mL was subjected to microwave irradiation at 140-230 °C for 5 minutes, with 4 minutes of pre-heating. One gram of fractured activated carbon made of coconut shell was added into a number of suspensions that were subjected to the same conditions of microwave irradiation. The soluble fraction of the hydrolysates was analyzed for its total soluble solids, malto-oligomer distribution, glucose content, pH value, and formation of brown compounds. The effects of the combined severity parameter at a substrate concentration of 5-12.5% on the glucose yield were also evaluated. The highest glucose yield (78% of dry matter was obtained after hydrolysis at 180 °C without activated carbon addition. Heating above 180 °C reduced the glucose yield and increased the pH and the formation of brown compounds. The use of activated carbon in microwave-assisted acid hydrolysis of cassava pulp reduced the glucose yield, but suppressed the formation of brown compounds. The highest glucose yield (70-80% of dry matter was attained at a severity parameter of 1.3-1.5.

  15. Energy Value of Cassava Products in Broiler Chicken Diets with or without Enzyme Supplementation.

    Science.gov (United States)

    Bhuiyan, M M; Iji, P A

    2015-09-01

    This study investigated the metabolizable energy (ME) intake, net energy of production (NEp), heat production (HP), efficiencies of ME use for energy, lipid and protein retention as well as the performance of broiler chickens fed diets based on cassava chips or pellets with or without supplementation with an enzyme product containing xylanase, amylase, protease and phytase. The two products, cassava chips and pellets, were analysed for nutrient composition prior to feed formulation. The cassava chips and pellets contained 2.2% and 2.1% crude protein; 1.2% and 1.5% crude fat; and 75.1% and 67.8% starch, respectively. Lysine and methionine were 0.077%, 0.075%, and 0.017%, 0.020% protein material, respectively, while calculated ME was 12.6 and 11.7 MJ/kg, respectively. Feed intake to day 21 was lower (pproduction was highest (pproduction, and the nutritive value of such diets can be improved through supplementation of enzyme products containing carbohydrases, protease, and phytase.

  16. A new alkalophilic isolate of Bacillus as a producer of cyclodextrin glycosyltransferase using cassava flour

    Directory of Open Access Journals (Sweden)

    Sheila Lorena de Araújo Coelho

    2016-03-01

    Full Text Available Abstract Cyclodextrin glycosyltransferase (CGTase catalyzes the conversion of starch into non-reducing cyclic sugars, cyclodextrins, which have several industrial applications. This study aimed to establish optimal culture conditions for β-CGTase production by Bacillus sp. SM-02, isolated from soil of cassava industries waste water lake. The optimization was performed by Central Composite Design (CCD 2, using cassava flour and corn steep liquor as substrates. The maximum production of 1087.9 U mL−1 was obtained with 25.0 g L−1 of cassava flour and 3.5 g L−1 of corn steep after 72 h by submerged fermentation. The enzyme showed optimum activity at pH 5.0 and temperature 55 °C, and maintained thermal stability at 55 °C for 3 h. The enzymatic activity was stimulated in the presence of Mg+2, Ca+2, EDTA, K+, Ba+2 and Na+ and inhibited in the presence of Hg+2, Cu+2, Fe+2 and Zn+2. The results showed that Bacillus sp. SM-02 have good potential for β-CGTase production.

  17. Characterization of starch films containing starch nanoparticles: part 1: physical and mechanical properties.

    Science.gov (United States)

    Shi, Ai-Min; Wang, Li-Jun; Li, Dong; Adhikari, Benu

    2013-07-25

    We report, for the first time, the preparation method and characteristics of starch films incorporating spray dried and vacuum freeze dried starch nanoparticles. Physical properties of these films such as morphology, crystallinity, water vapor permeability (WVP), opacity, and glass transition temperature (Tg) and mechanical properties (strain versus temperature, strain versus stress, Young's modulus and toughness) were measured. Addition of both starch nanoparticles in starch films increased roughness of surface, lowered degree of crystallinity by 23.5%, WVP by 44% and Tg by 4.3°C, respectively compared to those of starch-only films. Drying method used in preparation of starch nanoparticles only affected opacity of films. The incorporation of nanoparticles in starch films resulted into denser films due to which the extent of variation of strain with temperature was much lower. The toughness and Young's modulus of films containing both types of starch nanoparticles were lower than those of control films especially at <100°C. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. AN OVERVIEW OF CASSAVA IN AFRICA

    African Journals Online (AJOL)

    limited research and development activities on the crop in Africa until comparatively recently. ... several serious challenges facing cassava researchers in Africa today; key among these are the need to ..... on cas sava white flies in Colombia:.

  19. Cassava production and consumption: Health implications

    African Journals Online (AJOL)

    Mr A. O. Akinpelu

    The paper examined health issues on production and consumption of cassava. It was revealed .... This is potential cocoa output lost due to ineffective ..... Productive Benefit of improving Health: Evidence from low income countries. Mimeo ...

  20. technologies: controlling african cassava mosaic virus

    African Journals Online (AJOL)

    healthy planting material, rogue infected plants and change varieties in attempts at control. This ... Moreover, obstacles to adoption must be identified and overcome. Key Words: Cassava .... adaptability, ACMD resistance and yield of improved ...

  1. EFFICENCY OF CASSAVA PROCESSING TECHNIQUES AMONG ...

    African Journals Online (AJOL)

    technology that can kick start and complete cassava tuber processing into any of ... is recommended that our engineers should construct low cost processing ... remove this poison, reduce its toxicity, increase and its palatability and storage life ...

  2. Chemical safety of cassava products in regions adopting cassava production and processing - experience from Southern Africa

    DEFF Research Database (Denmark)

    Nyirenda, D.B.; Chiwona-Karltun, L.; Chitundu, M.

    2011-01-01

    The cassava belt area in Southern Africa is experiencing an unforeseen surge in cassava production, processing and consumption. Little documentation exists on the effects of this surge on processing procedures, the prevailing levels of cyanogenic glucosides of products consumed and the levels of ...

  3. RNAi-mediated resistance to Cassava brown streak Uganda virus in transgenic cassava.

    Science.gov (United States)

    Yadav, Jitender S; Ogwok, Emmanuel; Wagaba, Henry; Patil, Basavaprabhu L; Bagewadi, Basavaraj; Alicai, Titus; Gaitan-Solis, Eliana; Taylor, Nigel J; Fauquet, Claude M

    2011-09-01

    Cassava brown streak disease (CBSD), caused by Cassava brown streak Uganda virus (CBSUV) and Cassava brown streak virus (CBSV), is of new epidemic importance to cassava (Manihot esculenta Crantz) production in East Africa, and an emerging threat to the crop in Central and West Africa. This study demonstrates that at least one of these two ipomoviruses, CBSUV, can be efficiently controlled using RNA interference (RNAi) technology in cassava. An RNAi construct targeting the near full-length coat protein (FL-CP) of CBSUV was expressed constitutively as a hairpin construct in cassava. Transgenic cassava lines expressing small interfering RNAs (siRNAs) against this sequence showed 100% resistance to CBSUV across replicated graft inoculation experiments. Reverse transcriptase-polymerase chain reaction (RT-PCR) analysis showed the presence of CBSUV in leaves and some tuberous roots from challenged controls, but not in the same tissues from transgenic plants. This is the first demonstration of RNAi-mediated resistance to the ipomovirus CBSUV in cassava.

  4. Characteristics of raw starch degrading alpha-amylase from Bacillus aquimaris MKSC 6.2 associated with soft coral Sinularia sp.

    NARCIS (Netherlands)

    Puspasari, Fernita; Nurachman, Zeily; Noer, Achmad Saefuddin; Radjasa, Ocky Karna; van der Maarel, Marc J. E. C.; Natalia, Dessy

    Partially purified alpha-amylase from Bacillus aquimaris MKSC 6.2, a bacterium isolated from a soft coral Sinularia sp., Merak Kecil Island, West Java, Indonesia, showed an ability to degrade raw corn, rice, sago, cassava, and potato starches with adsorption percentage in the range of 65-93%. Corn

  5. Characteristics of raw starch degrading alpha-amylase from Bacillus aquimaris MKSC 6.2 associated with soft coral Sinularia sp.

    NARCIS (Netherlands)

    Puspasari, Fernita; Nurachman, Zeily; Noer, Achmad Saefuddin; Radjasa, Ocky Karna; van der Maarel, Marc J. E. C.; Natalia, Dessy

    2011-01-01

    Partially purified alpha-amylase from Bacillus aquimaris MKSC 6.2, a bacterium isolated from a soft coral Sinularia sp., Merak Kecil Island, West Java, Indonesia, showed an ability to degrade raw corn, rice, sago, cassava, and potato starches with adsorption percentage in the range of 65-93%. Corn h

  6. Enhancing yield and profitability of cassava in the savannah and ...

    African Journals Online (AJOL)

    SARAH

    2015-05-30

    May 30, 2015 ... economical and environmental performance of production ... interactions between them and the environment. Besides the ..... varieties of yam, cassava and maize in ... Ph.D Thesis. 2004 ... influenced by cassava genotype.

  7. Sensory evaluation of different preparations of cassava leaves from ...

    African Journals Online (AJOL)

    Aikay Shaikh

    2013-11-13

    Nov 13, 2013 ... potential on domestic, regional and international markets. Cassava ... healthy and nutrition importance, cassava leaves con- sumption may be .... nonparametric test was done for sensory characteristics with strong departure ...

  8. post harvest production efficiency and output elasticity in cassava ...

    African Journals Online (AJOL)

    d

    CASSAVA PROCESSING ACTIVITIES IN RIVERS STATE. UCHE, C. Department of .... (Cassava Product Export Central Working Committee (CPECWC), 2002). According to ... In Fufu production, a unit increase in capital resulted in – 0.097.

  9. Information Needs of Cassava Farmers in Delta State of Nigeria

    African Journals Online (AJOL)

    Tanzania Journal of Agricultural Sciences (2014) Vol. 12 No. 2, 20-25. Introduction ... as planting materials, appropriate fertilizer regimes and weed management ... emptive management of the cassava mosaic disease. (CMD), the cassava ...

  10. Synthesis and characterization of reactive dye-cassava mesocarp ...

    African Journals Online (AJOL)

    USER

    2010-05-17

    May 17, 2010 ... tested for dye fixation, fastness (acid, alkali, wash) and solvent stability. Results ... obtained by using such an agricultural waste in feeding ... The cassava peels were obtained from a cassava processing mill at. Choba, Nigeria.

  11. Mycoflora and nutrient analysis of sundried cassava chips (Manihot ...

    African Journals Online (AJOL)

    SARAH

    2014-08-22

    Aug 22, 2014 ... cassava chips (Manihot esculenta) during storage. 7411. Mycoflora and .... of the stored dried cassava chips were scrapped and plated aseptically on potato ..... storage of plantain chips and the health implications. Journal of ...

  12. chemical adjustment chemical adjustment of effluent from cassava ...

    African Journals Online (AJOL)

    eobe

    makes the treatment of this wastewater difficult. Several waste ... industries and homes are discharged into the rivers, canals ... after anaerobic bio digestion, waste water from cassava can ..... Cassava Wastewater Effluent Disposal” European.

  13. Characterization of chestnut (Castanea sativa, mill starch for industrial utilization

    Directory of Open Access Journals (Sweden)

    Ivo Mottin Demiate

    2001-03-01

    Full Text Available Studies were conducted to characterize the chestnut and its starch. Chemical composition of the chestnuts showed high level of starch. Moisture level in the raw nuts was around 50g/100g in wet basis and starch content, around 80g/100g in dry basis; other nut flour components were protein (5.58 g/100g, lipid (5.39 g/100g, crude fiber (2.34 g/100g and ash (2.14 g/100g. Starch fraction was chemically characterized in order to identify the granule quality as compared with those of cassava and corn. This fraction showed more lipids and proteins than the other starches. Chestnut starch granules showed peculiar shape, smaller than the control starches and low amount of damaged units. Chemical composition concerning amylose : amylopectin ratio was intermediate to that presented by cassava and corn starch granules. Water absorption at different temperatures as well as solubility were also intermediate but closer to that presented by cassava granules. The same behavior was observed in the interaction with dimethyl-sulfoxide. Native starch granules and those submitted to enzymatic treatment with commercial alpha-amylase and also with enzymes from germinated wheat were observed by scanning electronic microscopy. Water suspensions of chestnut starch granules were heated to form pastes that were studied comparatively to those obtained with cassava and corn starches. Viscographic pattern of chestnut starch pastes showed a characteristic profile with high initial viscosity but peak absence, high resistance to mechanical stirring under hot conditions and high final viscosity. There was no way to compare it with the paste viscographic profiles obtained with the control starches. Chestnut starch pastes were stable down to pH 4 but unstable at pH 3. The water losses observed in the chestnut starch pastes after freeze-thaw cycles showed more similarity to the pattern observed in corn starch pastes as well as clarity and strength of the gel. In general the results

  14. Production of methane by co-digestion of cassava pulp with various concentrations of pig manure

    Energy Technology Data Exchange (ETDEWEB)

    Panichnumsin, Pornpan [The Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi, Thungkru, Bangkok 10140 (Thailand); Excellent Center of Waste Utilization and Management, National Center for Genetic Engineering and Biotechnology, Bangkhuntien, Bangkok 10150 (Thailand); Nopharatana, Annop [Pilot Plant Development and Training Institute, King Mongkut' s University of Technology Thonburi, Bangkhuntien, Bangkok 10150 (Thailand); Ahring, Birgitte [AAU, Copenhagen Institute of Technology, Lautrupvang 15, 2750 Ballerup (Denmark); Chaiprasert, Pawinee [School of Bioresources and Technology, King Mongkut' s University of Technology Thonburi, Bangkhuntien, Bangkok 10150 (Thailand)

    2010-08-15

    Cassava pulp is a major by-product produced in a cassava starch factory, containing 50-60% of starch (dry basis). Therefore, in this study we are considering its potential as a raw material substrate for the production of methane. To ensure sufficient amounts of nutrients for the anaerobic digestion process, the potential of co-digestion of cassava pulp (CP) with pig manure (PM) was further examined. The effect of the co-substrate mixture ratio was carried out in a semi-continuously fed stirred tank reactor (CSTR) operated under mesophilic condition (37 C) and at a constant OLR of 3.5 kg VS m{sup -3} d{sup -1} and a HRT of 15 days. The results showed that co-digestion resulted in higher methane production and reduction of volatile solids (VS) but lower buffering capacity. Compared to the digestion of PM alone, the specific methane yield increased 41% higher when co-digested with CP in concentrations up to 60% of the incoming VS. This was probably due to an increase in available easily degradable carbohydrates as the CP ratio in feedstock increased. The highest methane yield and VS removal of 306 mL g{sup -1} VS{sub added} and 61%, respectively, were achieved with good process stability (VFA:Alkalinity ratio < 0.1) when CP accounted for 60% of the feedstock VS. A further increase of CP of the feedstock led to a decrease in methane yield and solid reductions. This appeared to be caused by an extremely high C:N ratio of the feedstock resulting in a deficiency of ammonium nitrogen for microbial growth and buffering capacity. (author)

  15. Enzymatic modification of starch

    DEFF Research Database (Denmark)

    Jensen, Susanne Langgård

    substrate, and granular products were only obtained at low hydration of the starch. Hence, limiting hydration and gelatinization by using low-phosphate starch and high substrate oncentration was required for obtaining these products. Also high BE activity was a requirement and could partly compensate...... exclusively been conducted on gelatinized starch. This study provides a new concept for transferase-based modification of starches in granular state.......In the food industry approaches for using bioengineering are investigated as alternatives to conventional chemical and physical starch modification techniques in development of starches with specific properties. Enzyme-assisted post-harvest modification is an interesting approach to this, since...

  16. Enzymatic modification of starch

    DEFF Research Database (Denmark)

    Jensen, Susanne Langgård

    In the food industry approaches for using bioengineering are investigated as alternatives to conventional chemical and physical starch modification techniques in development of starches with specific properties. Enzyme-assisted post-harvest modification is an interesting approach to this, since...... branching connecting larger chain segments. In case of high BE activity this transfer happened prior to hydration and phase separation. The starch substrates thereby became locked in their granular structure and blocked furher access of BE. Transferase-based modification of starch has today almost...... exclusively been conducted on gelatinized starch. This study provides a new concept for transferase-based modification of starches in granular state....

  17. Evaluation of cassava (Manihot esculenta (Crantz) planting methods ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-01-05

    Jan 5, 2008 ... Merrill] sowing dates on the yield performance of the ... There was no interaction effect between cassava planting method ... used, soybean sown 4 or 2 weeks before cassava gave the highest monetary returns ..... soybean/maize/cassava intercrop, in which they were of .... Relative sowing time and density.

  18. BEMISJA TAB4CI: THE WHITEFLY VECTOR OF CASSAVA MOSAIC

    African Journals Online (AJOL)

    ABSTRACT. The ecology of the Bemisia tabaci/cassava/African cassava mosaic virus (ACMV) pathosystem is reviewed ... importance ofinteractions of B. tabaci with other arthropod pests of cassava and the influence of ecological .... spreads at different rates in different agro- ..... Manage = Management, Inter = Intercropping ...

  19. Phenotypic approaches to drought in cassava: review.

    Science.gov (United States)

    Okogbenin, Emmanuel; Setter, Tim L; Ferguson, Morag; Mutegi, Rose; Ceballos, Hernan; Olasanmi, Bunmi; Fregene, Martin

    2013-01-01

    Cassava is an important crop in Africa, Asia, Latin America, and the Caribbean. Cassava can be produced adequately in drought conditions making it the ideal food security crop in marginal environments. Although cassava can tolerate drought stress, it can be genetically improved to enhance productivity in such environments. Drought adaptation studies in over three decades in cassava have identified relevant mechanisms which have been explored in conventional breeding. Drought is a quantitative trait and its multigenic nature makes it very challenging to effectively manipulate and combine genes in breeding for rapid genetic gain and selection process. Cassava has a long growth cycle of 12-18 months which invariably contributes to a long breeding scheme for the crop. Modern breeding using advances in genomics and improved genotyping, is facilitating the dissection and genetic analysis of complex traits including drought tolerance, thus helping to better elucidate and understand the genetic basis of such traits. A beneficial goal of new innovative breeding strategies is to shorten the breeding cycle using minimized, efficient or fast phenotyping protocols. While high throughput genotyping have been achieved, this is rarely the case for phenotyping for drought adaptation. Some of the storage root phenotyping in cassava are often done very late in the evaluation cycle making selection process very slow. This paper highlights some modified traits suitable for early-growth phase phenotyping that may be used to reduce drought phenotyping cycle in cassava. Such modified traits can significantly complement the high throughput genotyping procedures to fast track breeding of improved drought tolerant varieties. The need for metabolite profiling, improved phenomics to take advantage of next generation sequencing technologies and high throughput phenotyping are basic steps for future direction to improve genetic gain and maximize speed for drought tolerance breeding.

  20. Phenotypic Approaches to Drought in Cassava: Review

    Directory of Open Access Journals (Sweden)

    Emmanuel eOkogbenin

    2013-05-01

    Full Text Available Cassava is an important crop in Africa, Asia, Latin America and the Caribbean. Cassava can be produced adequately in drought conditions making it the ideal food security crop in marginal environments. Although cassava can tolerate drought stress, it can be genetically improved to enhance productivity in such environments. Drought adaptation studies in over three decades in cassava have identified relevant mechanisms which have been explored in conventional breeding. Drought is a quantitative trait and its multigenic nature makes it very challenging to effectively manipulate and combine genes in breeding for rapid genetic gain and selection process. Cassava has a long growth cycle of 12 - 18 months which invariably contributes to a long breeding scheme for the crop. Modern breeding using advances in genomics and improved genotyping, is facilitating the dissection and genetic analysis of complex traits including drought tolerance, thus helping to better elucidate and understand the genetic basis of such traits. A beneficial goal of new innovative breeding strategies is to shorten the breeding cycle using minimized, efficient or fast phenotyping protocols. While high throughput genotyping have been achieved, this is rarely the case for phenotyping for drought adaptation. Some of the storage root phenotyping in cassava are often done very late in the evaluation cycle making selection process very slow. This paper highlights some modified traits suitable for early-growth phase phenotyping that may be used to reduce drought phenotyping cycle in cassava. Such modified traits can significantly complement the high throughput genotyping procedures to fast track breeding of improved drought tolerant varieties. The need for metabolite profiling, improved phenomics to take advantage of next generation sequencing technologies and high throughput phenotyping are basic steps for future direction to improve genetic gain and maximize speed for drought tolerance

  1. Influence of swelling of vegetable particles on structure and rheology of starch matrices

    NARCIS (Netherlands)

    Silva, E.; Scholten, E.; Linden, van der E.; Sagis, L.M.C.

    2012-01-01

    High volume fractions of dried broccoli particles (up to 20% v/v) were incorporated in a starch dough. The concentration of pre-gelatinized starch was varied between 10 and 30%. The addition of 20% v/v dried broccoli powder, causes a significant increase in the shear modulus. For pure starch, the mo

  2. Large-scale SNP discovery through RNA sequencing and SNP genotyping by targeted enrichment sequencing in cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Pootakham, Wirulda; Shearman, Jeremy R; Ruang-Areerate, Panthita; Sonthirod, Chutima; Sangsrakru, Duangjai; Jomchai, Nukoon; Yoocha, Thippawan; Triwitayakorn, Kanokporn; Tragoonrung, Somvong; Tangphatsornruang, Sithichoke

    2014-01-01

    Cassava (Manihot esculenta Crantz) is one of the most important crop species being the main source of dietary energy in several countries. Marker-assisted selection has become an essential tool in plant breeding. Single nucleotide polymorphism (SNP) discovery via transcriptome sequencing is an attractive strategy for genome complexity reduction in organisms with large genomes. We sequenced the transcriptome of 16 cassava accessions using the Illumina HiSeq platform and identified 675,559 EST-derived SNP markers. A subset of those markers was subsequently genotyped by capture-based targeted enrichment sequencing in 100 F1 progeny segregating for starch viscosity phenotypes. A total of 2,110 non-redundant SNP markers were used to construct a genetic map. This map encompasses 1,785 cM and consists of 19 linkage groups. A major quantitative trait locus (QTL) controlling starch pasting properties was identified and shown to coincide with the QTL previously reported for this trait. With a high-density SNP-based linkage map presented here, we also uncovered a novel QTL associated with starch pasting time on LG 10.

  3. An atlas of cassava in Africa : historical, agroecological and demographic aspects of crop distribution

    NARCIS (Netherlands)

    Carter, S.; Fresco, L.O.; Jones, P.

    1992-01-01

    This book contains 6 chapters covering: the dynamics of cassava in Africa; the introduction and diffusion of cassava in Africa; current distribution of cassava in Africa; the relationship of cassava distribution to environment and population; distribution and change in cassava production in Nigeria,

  4. Sequences enhancing cassava mosaic disease symptoms occur in the cassava genome and are associated with South African cassava mosaic virus infection.

    Science.gov (United States)

    Maredza, A T; Allie, F; Plata, G; Rey, M E C

    2016-06-01

    Cassava is an important food security crop in Sub-Saharan Africa. Two episomal begomovirus-associated sequences, named Sequences Enhancing Geminivirus Symptoms (SEGS1 and SEGS2), were identified in field cassava affected by the devastating cassava mosaic disease (CMD). The sequences reportedly exacerbated CMD symptoms in the tolerant cassava landrace TME3, and the model plants Arabidopsis thaliana and Nicotiana benthamiana, when biolistically co-inoculated with African cassava mosaic virus-Cameroon (ACMV-CM) or East African cassava mosaic virus-UG2 (EACMV-UG2). Following the identification of small SEGS fragments in the cassava EST database, the intention of this study was to confirm their presence in the genome, and investigate a possible role for these sequences in CMD. We report that multiple copies of varying lengths of both SEGS1 and SEGS2 are widely distributed in the sequenced cassava genome and are present in several other cassava accessions screened by PCR. The endogenous SEGS1 and SEGS2 are in close proximity or overlapping with cassava genes, suggesting a possible role in regulation of specific biological processes. We confirm the expression of SEGS in planta using EST data and RT-PCR. The sequence features of endogenous SEGS (iSEGS) are unique but resemble non-autonomous transposable elements (TEs) such as MITEs and helitrons. Furthermore, many SEGS-associated genes, some involved in virus-host interactions, are differentially expressed in susceptible (T200) and tolerant TME3) cassava landraces infected by South African cassava mosaic virus (SACMV) of susceptible (T200) and tolerant (TME3) cassava landraces. Abundant SEGS-derived small RNAs were also present in mock-inoculated and SACMV-infected T200 and TME3 leaves. Given the known role of TEs and associated genes in gene regulation and plant immune responses, our observations are consistent with a role of these DNA elements in the host's regulatory response to geminiviruses.

  5. Gene expression of beta carotene genes in transgenic biofortified cassava

    OpenAIRE

    Telengech, P. K.; Maling’a, J. N.; Nyende, A. B.; Gichuki, S. T.; Wanjala, B. W.

    2014-01-01

    Cassava is an important food for millions of people around the world. However, cassava is deficient in protein, iron, zinc, pro-vitamin A and vitamin E. Cassava biofortified with pro-vitamin A can help reduce Vitamin A Deficiency among the undernourished communities that rely upon it for sustenance. BioCassava Plus project has developed transgenic cassava that expresses beta carotene in roots using root specific patatin promoter. This study aimed at confirming expression of nptII, crtB and DX...

  6. Study of Products Distilled Spirits with Cassava Dregs

    Institute of Scientific and Technical Information of China (English)

    WANG le; WANG Jun-gao; LIU Wen-long

    2009-01-01

    In this paper, Cassava dregs are an outgrowth produced during starchy production which uses cassava as raw material. It is usually dropped out or used as cheap feedstuff. In order to make the best use of cassava dregs, increase industries' benefits and reduce castoff this study developed a new technique which used cassava dregs as raw material to produce distilled spirits based on cassava dregs characteristics. The technique adopt solid-ferment procedure. At first, the ferment is processed by solid-state distilling, and then rectification extra care refinement: at last the tequila was produced with characteristics of simple and elegant fragrance and mellow-tasting.

  7. Thermomechanical treatment of starch

    NARCIS (Netherlands)

    Goot, van der A.J.; Einde, van den R.M.

    2006-01-01

    Starch is used as a major component in many food and nonfood applications and determines the overall product properties to a large extent. It is therefore important to understand the effect of processing on starch. Many starch-based products are produced using a thermal as well as a mechanical treat

  8. Exploration and Research on the Preparation of Ethanol by Cassava Residue%木薯渣制备乙醇探索研究

    Institute of Scientific and Technical Information of China (English)

    赵晓锋; 张全; 姚秀清; 关浩; 佟明友

    2012-01-01

    [目的]对木薯渣水解糖发酵制乙醇的再利用过程进行考察.[方法]以木薯渣为原料,采用同步糖化发酵工艺,研究木薯渣中淀粉、纤维素和半纤维素术解糖分开发酵或共同发酵制乙醇的过程.[结果]原料中纤维素含量为34.70%,半纤维素含量为9.70%,淀粉含量为15.35%;采用同步糖化共发酵工艺较同步糖化分开发酵工艺,乙醇相对于原料的产率高,可达到28.04%.[结论]该研究可为术薯渣的合理利用提供技术支持.%[ Objective] To investigate the ethanol preparation from the fermentation of cassava residue. [ Method] The simultaneous saccharifiea- tion and fermentation (SSF) technology was applied to study the separate fermentation and co-fermentation of the fermentable sugar from starch, cellulose and hemicellulose in cassava residue. [ Result] The content of cellulose, hemicellulose and starch in cassava residue were 34. 70% , 9.70% and 15.35% respectively, and the ethanol yield related to cassava residue achieved by co-fermentation process was 28.04% , which was higher compared with separate fermentation process. [Conclusion] The study provides technical support for the reasonable utilization of cassava residue.

  9. Empowering biotechnology in southern Africa: establishment of a robust transformation platform for the production of transgenic industry-preferred cassava.

    Science.gov (United States)

    Chetty, C C; Rossin, C B; Gruissem, W; Vanderschuren, H; Rey, M E C

    2013-01-25

    Knowledge and technology transfer to African laboratories and farmers is an important objective for achieving food security and sustainable crop production on the sub-Saharan African continent. Cassava (Manihot esculenta Crantz) is a vital source of calories for more than a billion people in developing countries, and its potential industrial use for starch and bioethanol in the tropics is increasingly being recognized. However, cassava production remains constrained by the susceptibility of the crop to several biotic and abiotic stresses. For more than a decade, biotechnology has been considered an attractive tool to improve cassava as it substantially circumvents the limitations of traditional breeding, which is particularly time-consuming and tedious because of the high heterozygosity of the crop. A major constraint to the development of biotechnological approaches for cassava improvement has been the lack of an efficient and robust transformation and regeneration system. Despite some success achieved in genetic modification of the model cassava cultivar Tropical Manihot Series (TMS), TMS 60444, in some European and U.S. laboratories, the lack of a reproducible and robust protocol has not allowed the establishment of a routine transformation system in sub-Saharan Africa. In this study, we optimized a robust and efficient protocol developed at ETH Zurich to successfully establish transformation of a commercially cultivated South African landrace, T200, and compared this with the benchmark model cultivar TMS 60444. Results from our study demonstrated high transformation rates for both T200 (23 transgenic lines from 100 friable embryogenic callus (FEC) clusters) compared with TMS 60444 (32 transgenic lines from 100 FEC clusters). The success in transforming landraces or farmer-preferred cultivars has been limited, and the high transformation rate of an industry-preferred landrace in this study is encouraging for a feasible transformation program for cassava

  10. Starch Characteristics Linked to Gluten-Free Products

    Directory of Open Access Journals (Sweden)

    Stefan W. Horstmann

    2017-04-01

    Full Text Available The increasing prevalence of coeliac disease (CD and gluten-related disorders has led to increasing consumer demand for gluten-free products with quality characteristics similar to wheat bread. The replacement of gluten in cereal-based products remains a challenge for scientists, due to its unique role in network formation, which entraps air bubbles. When gluten is removed from a flour, starch is the main component left. Starch is used as gelling, thickening, adhesion, moisture-retention, stabilizing, film forming, texturizing and anti-staling ingredient. The extent of these properties varies depending on the starch source. The starches can additionally be modified increasing or decreasing certain properties of the starch, depending on the application. Starch plays an important role in the formulation of bakery products and has an even more important role in gluten-free products. In gluten-free products, starch is incorporated into the food formulation to improve baking characteristics such as the specific volume, colour and crumb structure and texture. This review covers a number of topics relating to starch; including; an overview of common and lesser researched starches; chemical composition; morphology; digestibility; functionality and methods of modification. The emphasis of this review is on starch and its properties with respect to the quality of gluten-free products.

  11. A single-tube duplex and multiplex PCR for simultaneous detection of four cassava mosaic begomovirus species in cassava plants.

    Science.gov (United States)

    Aloyce, R C; Tairo, F; Sseruwagi, P; Rey, M E C; Ndunguru, J

    2013-04-01

    A single-tube duplex and multiplex PCR was developed for the simultaneous detection of African cassava mosaic virus (ACMV), East African cassava mosaic Cameroon virus (EACMCV), East African cassava mosaic Malawi virus (EACMMV) and East African cassava mosaic Zanzibar virus (EACMZV), four cassava mosaic begomoviruses (CMBs) affecting cassava in sub-Saharan Africa. Co-occurrence of the CMBs in cassava synergistically enhances disease symptoms and complicates their detection and diagnostics. Four primer pairs were designed to target DNA-A component sequences of cassava begomoviruses in a single tube PCR amplification using DNA extracted from dry-stored cassava leaves. Duplex and multiplex PCR enabled the simultaneous detection and differentiation of the four CMBs, namely ACMV (940bp), EACMCV (435bp), EACMMV (504bp) and EACMZV (260bp) in single and mixed infections, and sequencing results confirmed virus identities according to the respective published sequences of begomovirus species. In addition, we report here a modified Dellapotra et al. (1983) protocol, which was used to extract DNA from dry and fresh cassava leaves with comparable results. Using the duplex and multiplex techniques, time was saved and amount of reagents used were reduced, which translated into reduced cost of the diagnostics. This tool can be used by cassava breeders screening for disease resistance; scientists doing virus diagnostic studies; phytosanitary officers checking movement of diseased planting materials, and seed certification and multipliers for virus indexing.

  12. Informal “Seed” Systems and the Management of Gene Flow in Traditional Agroecosystems: The Case of Cassava in Cauca, Colombia

    Science.gov (United States)

    Dyer, George A.; González, Carolina; Lopera, Diana Carolina

    2011-01-01

    Our ability to manage gene flow within traditional agroecosystems and their repercussions requires understanding the biology of crops, including farming practices' role in crop ecology. That these practices' effects on crop population genetics have not been quantified bespeaks lack of an appropriate analytical framework. We use a model that construes seed-management practices as part of a crop's demography to describe the dynamics of cassava (Manihot esculenta Crantz) in Cauca, Colombia. We quantify several management practices for cassava—the first estimates of their kind for a vegetatively-propagated crop—describe their demographic repercussions, and compare them to those of maize, a sexually-reproduced grain crop. We discuss the implications for gene flow, the conservation of cassava diversity, and the biosafety of vegetatively-propagated crops in centers of diversity. Cassava populations are surprisingly open and dynamic: farmers exchange germplasm across localities, particularly improved varieties, and distribute it among neighbors at extremely high rates vis-à-vis maize. This implies that a large portion of cassava populations consists of non-local germplasm, often grown in mixed stands with local varieties. Gene flow from this germplasm into local seed banks and gene pools via pollen has been documented, but its extent remains uncertain. In sum, cassava's biology and vegetative propagation might facilitate pre-release confinement of genetically-modified varieties, as expected, but simultaneously contribute to their diffusion across traditional agroecosystems if released. Genetically-modified cassava is unlikely to displace landraces or compromise their diversity; but rapid diffusion of improved germplasm and subsequent incorporation into cassava landraces, seed banks or wild populations could obstruct the tracking and eradication of deleterious transgenes. Attempts to regulate traditional farming practices to reduce the risks could compromise cassava

  13. Microbial degradation and utilization of cassava peel.

    Science.gov (United States)

    Ofuya, C O; Nwajiuba, C J

    1990-06-01

    Cassava peel was readily degraded and utilized by a strain ofRhizopus growing in a solid-state fermentation. Growth was maximal at 45°C and was proportional to the degree of hydrolysis of the peel. The yield of biomass, as weight of dry mycellum from the reducing sugars of the peel, was 51%. After 72 h fermentation, the peel contained 76% moisture, 6% cellulose, 7% hemicellulose and 0.4% ash and the protein content had increased from 5.6% to 16%. These results suggest a possible economic value of cassava peel in the production of fungal biomass and feedstock.

  14. Emergence of a Latent Indian Cassava Mosaic Virus from Cassava Which Recovered from Infection by a Non-Persistent Sri Lankan Cassava Mosaic Virus.

    Science.gov (United States)

    Karthikeyan, Chockalingam; Patil, Basavaprabhu L; Borah, Basanta K; Resmi, Thulasi R; Turco, Silvia; Pooggin, Mikhail M; Hohn, Thomas; Veluthambi, Karuppannan

    2016-09-28

    The major threat for cassava cultivation on the Indian subcontinent is cassava mosaic disease (CMD) caused by cassava mosaic geminiviruses which are bipartite begomoviruses with DNA A and DNA B components. Indian cassava mosaic virus (ICMV) and Sri Lankan cassava mosaic virus (SLCMV) cause CMD in India. Two isolates of SLCMV infected the cassava cultivar Sengutchi in the fields near Malappuram and Thiruvananthapuram cities of Kerala State, India. The Malappuram isolate was persistent when maintained in the Madurai Kamaraj University (MKU, Madurai, Tamil Nadu, India) greenhouse, whereas the Thiruvananthapuram isolate did not persist. The recovered cassava plants with the non-persistent SLCMV, which were maintained vegetative in quarantine in the University of Basel (Basel, Switzerland) greenhouse, displayed re-emergence of CMD after a six-month period. Interestingly, these plants did not carry SLCMV but carried ICMV. It is interpreted that the field-collected, SLCMV-infected cassava plants were co-infected with low levels of ICMV. The loss of SLCMV in recovered cassava plants, under greenhouse conditions, then facilitated the re-emergence of ICMV. The partial dimer clones of the persistent and non-persistent isolates of SLCMV and the re-emerged isolate of ICMV were infective in Nicotiana benthamiana upon agroinoculation. Studies on pseudo-recombination between SLCMV and ICMV in N. benthamiana provided evidence for trans-replication of ICMV DNA B by SLCMV DNA A.

  15. Emergence of a Latent Indian Cassava Mosaic Virus from Cassava Which Recovered from Infection by a Non-Persistent Sri Lankan Cassava Mosaic Virus

    Directory of Open Access Journals (Sweden)

    Chockalingam Karthikeyan

    2016-09-01

    Full Text Available The major threat for cassava cultivation on the Indian subcontinent is cassava mosaic disease (CMD caused by cassava mosaic geminiviruses which are bipartite begomoviruses with DNA A and DNA B components. Indian cassava mosaic virus (ICMV and Sri Lankan cassava mosaic virus (SLCMV cause CMD in India. Two isolates of SLCMV infected the cassava cultivar Sengutchi in the fields near Malappuram and Thiruvananthapuram cities of Kerala State, India. The Malappuram isolate was persistent when maintained in the Madurai Kamaraj University (MKU, Madurai, Tamil Nadu, India greenhouse, whereas the Thiruvananthapuram isolate did not persist. The recovered cassava plants with the non-persistent SLCMV, which were maintained vegetative in quarantine in the University of Basel (Basel, Switzerland greenhouse, displayed re-emergence of CMD after a six-month period. Interestingly, these plants did not carry SLCMV but carried ICMV. It is interpreted that the field-collected, SLCMV-infected cassava plants were co-infected with low levels of ICMV. The loss of SLCMV in recovered cassava plants, under greenhouse conditions, then facilitated the re-emergence of ICMV. The partial dimer clones of the persistent and non-persistent isolates of SLCMV and the re-emerged isolate of ICMV were infective in Nicotiana benthamiana upon agroinoculation. Studies on pseudo-recombination between SLCMV and ICMV in N. benthamiana provided evidence for trans-replication of ICMV DNA B by SLCMV DNA A.

  16. Emergence of a Latent Indian Cassava Mosaic Virus from Cassava Which Recovered from Infection by a Non-Persistent Sri Lankan Cassava Mosaic Virus

    Science.gov (United States)

    Karthikeyan, Chockalingam; Patil, Basavaprabhu L.; Borah, Basanta K.; Resmi, Thulasi R.; Turco, Silvia; Pooggin, Mikhail M.; Hohn, Thomas; Veluthambi, Karuppannan

    2016-01-01

    The major threat for cassava cultivation on the Indian subcontinent is cassava mosaic disease (CMD) caused by cassava mosaic geminiviruses which are bipartite begomoviruses with DNA A and DNA B components. Indian cassava mosaic virus (ICMV) and Sri Lankan cassava mosaic virus (SLCMV) cause CMD in India. Two isolates of SLCMV infected the cassava cultivar Sengutchi in the fields near Malappuram and Thiruvananthapuram cities of Kerala State, India. The Malappuram isolate was persistent when maintained in the Madurai Kamaraj University (MKU, Madurai, Tamil Nadu, India) greenhouse, whereas the Thiruvananthapuram isolate did not persist. The recovered cassava plants with the non-persistent SLCMV, which were maintained vegetative in quarantine in the University of Basel (Basel, Switzerland) greenhouse, displayed re-emergence of CMD after a six-month period. Interestingly, these plants did not carry SLCMV but carried ICMV. It is interpreted that the field-collected, SLCMV-infected cassava plants were co-infected with low levels of ICMV. The loss of SLCMV in recovered cassava plants, under greenhouse conditions, then facilitated the re-emergence of ICMV. The partial dimer clones of the persistent and non-persistent isolates of SLCMV and the re-emerged isolate of ICMV were infective in Nicotiana benthamiana upon agroinoculation. Studies on pseudo-recombination between SLCMV and ICMV in N. benthamiana provided evidence for trans-replication of ICMV DNA B by SLCMV DNA A. PMID:27690084

  17. Characterization of starch extracted from the roots of Cissus simsiana Roem. & Schult

    Directory of Open Access Journals (Sweden)

    Diego Palmiro Ramirez Ascheri

    2014-02-01

    Full Text Available The aim of this study was to investigate the characterization of starch from Cissus simsiana Roem. & Schult. roots. The starch was extracted by steeping, wet grinding and sedimentation processes and its yield was calculated. Isolated starch was then characterized for chemical composition, morphology and granules size distribution, X-ray diffraction, mid-infrared spectra, swelling powder and solubility, pasting and thermal properties and clarity and syneresis behavior. The starch yield, based on starch presence in the root that can be isolated, were between 13.68% with 3.12 10-3 mg/g of carotenoids. C. simsiana granules were predominantly ellipsoids with 50-60 mm length and 20-30 mm wide. They exhibited B-type X-ray diffraction pattern with 41.2% of crystallinity, apparent amylose content of 26.2% and presented similar mid-infrared spectra to other starches. Onset and peak gelatinization temperatures were 64.2 and 68.56°C, respectively, and gelatinization enthalpy was 19.2 J/g. The apparent viscosity profile was comparable to cassava starch, but with higher peak viscosity (6500 cP, lower set back viscosity (600 cP and less clear gel showing syneresis.

  18. Production of Cyclodextrins by CGTase from Bacillus clausii Using Different Starches as Substrates

    Science.gov (United States)

    Alves-Prado, H. F.; Carneiro, A. A. J.; Pavezzi, F. C.; Gomes, E.; Boscolo, M.; Franco, C. M. L.; da Silva, R.

    Cyclodextrins (CDs) are cyclic oligasaccharides composed by d-glucose monomers joined by α-1,4-d glicosidic linkages. The main types of CDs are α-, β- and γ-CDs consisting of cycles of six, seven, and eight glucose monomers, respectively. Their ability to form inclusion complexes is the most important characteristic, allowing their wide industrial application. The physical property of the CD-complexed compound can be altered to improve stability, volatility, solubility, or bio-availability. The cyclomaltodextrin glucanotransferase (CGTase, EC 2.4.1.19) is an enzyme capable of converting starch into CD molecules. In this work, the CGTase produced by Bacillus clausii strain E16 was used to produce CD from maltodextrin and different starches (commercial soluble starch, corn, cassava, sweet potato, and waxy corn starches) as substrates. It was observed that the substrate sources influence the kind of CD obtained and that this CGTase displays a β-CGTase action, presenting a better conversion of soluble starch at 1.0%, of which 80% was converted in CDs. The ratio of total CD produced was 0:0.89:0.11 for α/β/γ. It was also observed that root and tuber starches were more accessible to CGTase action than seed starch under the studied conditions.

  19. THERMAL ANALYSIS, RHEOLOGY, X-RAY DIFFRACTOMETRY AND ATOMIC FORCE MICROSCOPY IN THE EVALUATION OF BINARY MIXTURES OF “STARCH-HYDROCOLLOIDS”

    Directory of Open Access Journals (Sweden)

    Crislaine Alberton

    2014-02-01

    Full Text Available Starch is arguably the most investigated biopolymer in the world and the cassava starch that is extracted from Manihot esculenta Crantz, represents an important vegetal crop in tropical countries, where its roots and derivatives serve as food and a source of energy. The main composition of these roots is 70-80% water, 16-24% starch and small quantities (<4% of protein, lipids vitamins and minerals. Hydrocolloids, or gums, are substances consisting of a hydrophilic long-chain with colloidal properties that, in water-based systems, produce gels. Starches and hydrocolloids are often used together in food systems to provide texture, water mobility, control moisture, improve product quality and stability, facilitate processing and reduce costs. In this study, the interactions between cassava and starch-hydrocolloids (1% of the following gums: CMC, jatahy, pectin and xanthan were investigated. The TG/DTG method made it possible to determine the thermal decomposition of each sample, which under air atmosphere occurs in three steps. Little difference was observed in the degree of relative crystallinity (XRD and in the average roughness or average diameter of the starch granules (NC-AFM. The viscosity and pasting properties (RVA increased, and were higher for starch treated with jatahy gum. A large decrease was observed in peak temperature and gelatinisation enthalpy for the treated samples (DSC.

  20. The use of biolistic inoculation of cassava mosaic begomoviruses in screening cassava for resistance to cassava mosaic disease.

    Science.gov (United States)

    Ariyo, O A; Atiri, G I; Dixon, A G O; Winter, S

    2006-10-01

    Inoculation of cassava with infectious clones of cassava mosaic geminiviruses (Geminiviridae: Begomovirus) and total DNA extracts from plants infected with well-characterised viruses was evaluated using the Bio-Rad Helios Gene Gun System. Total DNA extracts from infected plants and cloned viruses were produced for coating gold particles and bombardment onto new cassava genotypes, 96/1089A, 96/1039, 96/0160, 96/0304 and three local landraces TME 117, TME 3 and TME 4. Cloned DNA of a Kenyan isolate of the recombinant variant of East African cassava mosaic virus (EACMV-UG2-[Ka]), was only infectious to TME 117 (7/10 plants), 3 weeks post-inoculation with mild infection symptoms in the newly developing leaves. Biolistic inoculation with a chimeric pseudorecombinant virus between DNA A and B components from EACMV-[Ke-Kilifi] and EACMV-UG2-[Ka], respectively, was infectious to TME 117, 96/1039 and 96/0304 and developed very severe and persistent symptoms. TME 3 and TME 4 also developed symptoms, 12 days post-inoculation (d.p.i.). Total DNA extracts of ACMV and EACMV-[Ke-Kilifi] resulted in serious infections with symptoms already evident, 10d.p.i. In general, biolistic inoculation trials with total DNA extracts resulted in a higher number of infected plants expressing symptoms at a much earlier stage (10-12d.p.i.) compared with trials inoculated with virus clones.

  1. CARACTERIZACIÓN FÍSICO-MECÁNICA DE UN ALMIDÓN TERMOPLÁSTICO (TPS DE YUCA Y ANÁLISIS INTERFACIAL CON FIBRAS DE FIQUE CARACTERIZAÇÃO FÍSICO-MECÂNICO DE UM AMIDO TERMOPLÁSTICO (TPS DE MANDIOCA E ANÁLISE INTERFACIAL DE FIBRAS DE FIQUE PHYSICO-MECHANICAL CHARACTERIZATION OF THERMOPLASTIC CASSAVA STARCH (TPS AND INTERFACIAL ANALYSIS WITH FIQUE FIBERS

    Directory of Open Access Journals (Sweden)

    JOSE H. MINA H.

    2012-12-01

    de físico-química e mecânica. Verificou-se que os TPS apresentou uma absorção de humidade em equilíbrio de cerca de 10.5% e de resistência máxima, o módulo de elasticidade à tracção e tensão de 1.5 MPa, 42.5 MPa e 26%, respectivamente. Além disso, foi a resistência ao cisalhamento interfacial (RCI entre TPS e as fibras com o aumento de tratamento de superfície de Fique; sendoisso devido à rugosidade aumentada conseguida com a alcalinização.In order to assess the feasibility of reinforcing a thermoplastic starch (TPS matrix with fique fibers, were tested using micro-mechanical technique of pull-out. TPS was obtained from plasticization, with glycerol, of native cassava starch (manihot sculenta Crantz using an extrusion process. To estimate the interfacial shear strength (ISS were used both native and modified surface Fique fibers, from an alkaline treatment. For the preparation of test specimens TPS was pelletized, milled and then molding in the form of plates as a process of compression molding, the material was conditioned at 25°C and 54% of relative humidity, prior to physical-chemical and mechanical. It was found that the TPS presented a moisture absorption at equilibrium of about 10.5% and maximum strength, elastic modulus and tensile strain of 1.5 MPa, 42.5 MPa and 26% respectively. Furthermore, it was the interfacial shear strength (ISS between TPS and the fibers increased with surface treatment Fique, which was also due to increased roughness achieved with the alkalization.

  2. Consumer acceptability of stiff porridge based on various composite flour proportions of sorghum, maize and cassava.

    Science.gov (United States)

    Bangu, N T; Mtebe, K; Nzallawahe, T S

    1994-12-01

    A study was conducted to determine consumer acceptable proportions of flours in sorghum (var. serena) and maize or sorghum, maize and cassava composite flours. Breeder's serena flour extracted at 75 percent was mixed at various proportions with maize or with maize and cassava to constitute composite flours. The various composite flours were made into stiff porridge and presented to a group of panellists for sensory evaluation. The evaluation was conducted by scoring on a hedonic scale of 0-5 for poor to excellent, respectively, for the parameters colour, texture, flavour, taste and overall acceptability. The responses were analysed statistically. Alternatively the panellists were allowed to eat ad-lib any of the presented samples which appealed to them. The results demonstrated that slight incorporation (porridge overrides other factors in contributing to its acceptability.

  3. Porridge deconstructed: a comparative linguistic approach to the history of staple starch food preparations in Bantuphone Africa

    OpenAIRE

    Ricquier, Birgit

    2013-01-01

    Despite the current interest in food studies, little is known about the culinary history of Central and Southern Africa. Using the methods of historical-comparative linguistics, this dissertation provides the first insights into the culinary traditions of early Bantu speech communities. The dissertation focuses on the history of staple starch food preparations, more specifically, the history of porridge and the integration of cassava into Kongo culinary traditions.

  4. Porridge deconstructed: a comparative linguistic approach to the history of staple starch food preparations in Bantuphone Africa

    OpenAIRE

    Ricquier, Birgit

    2013-01-01

    Despite the current interest in food studies, little is known about the culinary history of Central and Southern Africa. Using the methods of historical-comparative linguistics, this dissertation provides the first insights into the culinary traditions of early Bantu speech communities. The dissertation focuses on the history of staple starch food preparations, more specifically, the history of porridge and the integration of cassava into Kongo culinary traditions.

  5. STARCH RETROGRADATION AND PRODUCTION OF RESISTANT STARCH IN COOKED RICE

    OpenAIRE

    2008-01-01

    After rice cooking, retrogradation of starch in a cooked rice progresses quickly at under gelatinization temperature. Cold rice (aging rice) is tasteless, firm and digested slowly. My aim in this report is explained the relationship between cold rice tasteless and indexes of starch retrogradation. Starch gelatinization degree, starch whiteness index and resistant starch content that were indexes of starch retrogradation did not change remarkably of cold and aging rice that were very firm and ...

  6. The Cassava Genome: Current Progress, Future Directions.

    Science.gov (United States)

    Prochnik, Simon; Marri, Pradeep Reddy; Desany, Brian; Rabinowicz, Pablo D; Kodira, Chinnappa; Mohiuddin, Mohammed; Rodriguez, Fausto; Fauquet, Claude; Tohme, Joseph; Harkins, Timothy; Rokhsar, Daniel S; Rounsley, Steve

    2012-03-01

    The starchy swollen roots of cassava provide an essential food source for nearly a billion people, as well as possibilities for bioenergy, yet improvements to nutritional content and resistance to threatening diseases are currently impeded. A 454-based whole genome shotgun sequence has been assembled, which covers 69% of the predicted genome size and 96% of protein-coding gene space, with genome finishing underway. The predicted 30,666 genes and 3,485 alternate splice forms are supported by 1.4 M expressed sequence tags (ESTs). Maps based on simple sequence repeat (SSR)-, and EST-derived single nucleotide polymorphisms (SNPs) already exist. Thanks to the genome sequence, a high-density linkage map is currently being developed from a cross between two diverse cassava cultivars: one susceptible to cassava brown streak disease; the other resistant. An efficient genotyping-by-sequencing (GBS) approach is being developed to catalog SNPs both within the mapping population and among diverse African farmer-preferred varieties of cassava. These resources will accelerate marker-assisted breeding programs, allowing improvements in disease-resistance and nutrition, and will help us understand the genetic basis for disease resistance.

  7. The Post-Genomic Era of Cassava

    Science.gov (United States)

    The genomics era revolutionized our efficiency at gathering and disseminating scientific information required for advancing our understanding of plant biology. In the case of cassava, the genomics revolution has not kept pace with other staple food and fiber crops important to global economies. As a...

  8. Recent advances in cassava pest management.

    Science.gov (United States)

    Bellotti, A C; Smith, L; Lapointe, S L

    1999-01-01

    Cassava (Manihot esculenta) occupies a uniquely important position as a food security crop for smallholder farmers in ares of the tropics where climate, soils, or societal stresses constrain production. Given its reliability and productivity, cassava is the most important locally produced food in a third of the world's low-income, food-deficit countries. It is the fourth most important source of carbohydrates for human consumption in the tropics, after rice, sugar, and maize. World production of cassava from 1994-1996 averaged 166 million tons/year grown on 16.6 million hectares (ha), for an average yield of 9.9 tons/ha. Approximately 57% is used for human consumption, 32% for animal feed and industrial purposes, and 11% is waste. Africa accounts for 51.3% of the production; Asia, 29.4%; and Latin America, 19.3%. The area planted to cassava in Africa, Asia, and Latin America is 10.3, 3.7, and 2.6 million ha, respectively.

  9. Revamping Nigerian Economy through Cassava Production

    African Journals Online (AJOL)

    Nneka Umera-Okeke

    AFRREV VOL. 11 (3), S/NO 47, JULY, 2017. 197 ... The main kernel of this paper is on revamping Nigerian economy through cassava production. .... almost 40% of the World's palm produce value at 18 billion US dollars (Business day,. 2012).

  10. Improving starch yield in cereals by over-expression of ADPglucose pyrophosphorylase: expectations and unanticipated outcomes.

    Science.gov (United States)

    Tuncel, Aytug; Okita, Thomas W

    2013-10-01

    Significant improvements in crop productivity are required to meet the nutritional requirements of a growing world population. This challenge is magnified by an increased demand for bioenergy as a means to mitigate carbon inputs into the environment. Starch is a major component of the harvestable organs of many crop plants, and various endeavors have been taken to improve the yields of starchy organs through the manipulation of starch synthesis. Substantial efforts have centered on the starch regulatory enzyme ADPglucose pyrophosphorylase (AGPase) due to its pivotal role in starch biosynthesis. These efforts include over-expression of this enzyme in cereal plants such as maize, rice and wheat as well as potato and cassava, as they supply the bulk of the staple food worldwide. In this perspective, we describe efforts to increase starch yields in cereal grains by first providing an introduction about the importance of source-sink relationship and the motives behind the efforts to alter starch biosynthesis and turnover in leaves. We then discuss the catalytic and regulatory properties of AGPase and the molecular approaches used to enhance starch synthesis by manipulation of this process during grain filling using seed-specific promoters. Several studies have demonstrated increases in starch content per seed using endosperm-specific promoters, but other studies have demonstrated an increase in seed number with only marginal impact on seed weight. Potential mechanisms that may be responsible for this paradoxical increase in seed number will also be discussed. Finally, we describe current efforts and future prospects to improve starch yield in cereals. These efforts include further enhancement of starch yield in rice by augmenting the process of ADPglucose transport into amyloplast as well as other enzymes involved in photoassimilate partitioning in seeds.

  11. SYNTHESIS AND CHARACTERIZATION OF BIODEGRDABLE PLASTIC FROM CASAVA STARCH AND ALOE VERA EXTRACT WITH GLYCEROL PLASTICIZER

    Directory of Open Access Journals (Sweden)

    Mery Apriyani

    2016-05-01

    Full Text Available Synthesis and characterizations of Biodegradable Plastic made of Cassava Waste Starch, glycerol, acetic acid and Aloe vera extract has done. The aims of this research are to study the influence of addition of aloe vera extract in plastics mechanics properties, water vapor transmission rate and biodegradation. There are five main steps in this research, extraction of aloe vera, cassava starch preparation from cassava waste, preparations, characterization and biodegradability study of biodegradable plastic. The addition variations of aloe vera extract that used in this research are 0.01; 0.03; 0.05; 0.07 and 0.14 grams. Results showed that the addition of aloe Vera tends to increased biodegrable plastic thickness to 0.01 mm and elongation to 32.07%. However, biodegradable plastic tensile strength tends to decreased to 23.95 Mpa. Optimum tensile strength is 3.90 Mpa and elongation is 34.43%. Optimum water vapor transmission rate is 2.40 g/m2hours. Biodegradation study of biodegradable plastic showed that addition of aloe vera extract doesn’t significantly influence in plastic degradations.

  12. Improvement of raw starch digestibility by ion-beam mutation of Aspergillus awamori

    Energy Technology Data Exchange (ETDEWEB)

    Amsal, Aryanti [National Atomic Energy Agency, Jakarta (Indonesia); Takigami, Machiko; Ito, Hitoshi

    1998-09-01

    Aspergillus awamori possess the ability to express raw starch digestibility. For the effective utilization of starchy crops produced in South-Asian countries, it is important to achieve the digestion of raw starchs for industrial fermentation process. In this study, higher ratio of mutant strains of Aspergillus awamori IFO4033 were isolated by irradiation of C{sup 5+} ion-beam on freeze dried spores with improvement of enzyme production for two-to threefold in the extracellular {alpha}-amylase compared with gamma-irradiation. The digestibility of raw starch from cassava, sago and sukun increased remarkably about two-to threefold by some mutant strains obtained from irradiation of C{sup 5+} ion-beam. (author)

  13. Biodegradable foams based on starch, polyvinyl alcohol, chitosan and sugarcane fibers obtained by extrusion

    Directory of Open Access Journals (Sweden)

    Flávia Debiagi

    2011-10-01

    Full Text Available Biodegradable foams made from cassava starch, polyvinyl alcohol (PVA, sugarcane bagasse fibers and chitosan were obtained by extrusion. The composites were prepared with formulations determined by a constrained ternary mixtures experimental design, using as variables: (X1 starch / PVA (100 - 70%, (X2 chitosan (0 - 2% and (X3 fibers from sugar cane (0 - 28%. The effects of varying proportions of these three components on foam properties were studied, as well the relationship between their properties and foam microstructure. The addition of starch/PVA in high proportions increased the expansion index and mechanical resistance of studied foams. Fibers addition improved the expansion and mechanical properties of the foams. There was a trend of red and yellow colors when the composites were produced with the highest proportions of fibers and chitosan, respectively. All the formulations were resistant to moisture content increase until 75% relative humidity of storage.

  14. The potential of using biotechnology to improve cassava: a review

    OpenAIRE

    Chavarriaga-Aguirre, Paul; Brand, Alejandro; Medina, Adriana; Prías, Mónica; Escobar, Roosevelt; Martinez, Juan; Díaz, Paula; LÓPEZ, CAMILO; Roca, Willy M; Tohme, Joe

    2016-01-01

    The importance of cassava as the fourth largest source of calories in the world requires that contributions of biotechnology to improving this crop, advances and current challenges, be periodically reviewed. Plant biotechnology offers a wide range of opportunities that can help cassava become a better crop for a constantly changing world. We therefore review the state of knowledge on the current use of biotechnology applied to cassava cultivars and its implications for breeding the crop into ...

  15. NUTRIENT DIGESTIBILITY OF THE WASTE OF SACCHARIFICATION PROCESS FROM CASSAVA BAGASSE ON THE LAYING HENS

    Directory of Open Access Journals (Sweden)

    W.M. Ali-Mursyid

    2014-10-01

    Full Text Available The objective of this research was to study the nutrient digestibility and the metabolizable energyvalue of the waste of saccharification process from cassava bagasse (WSPCB on the laying hens.Twenty ISA-Brown laying hens at the age of 72 weeks were randomly distributed into three feedingtreatments which consisted of cassava bagase (CB, WSPCB of solid state fermentation method(WSPCB-SSF, and WSPCB of sub merged fermentation method (WSPCB-SmF. All of the hens werefasted for 24 hours and 15 of them were fed with CB, WSPCB-SSF and WSPCB-SmF (five hens foreach test-diet. The other five hens were still fasted. Then, all of the hens were fasted again and theirexcreta were collected during 48 hours. The nutrient digestibilities which were measured consisted ofthe Apparent and True Digestibility of Dry matter (ADDM and TDDM, Crude Fiber (ADCF andTDCF, Starch (ADS and TDS, and the Apparent and True Metabolizable Energy (AME and TME.The result of this research showed that the saccharification process generated the solid waste with thenutrient digestibility value (ADDM, TDDM, ADS, TDS, AME, and TME which were significantlylower (P<0.05 than those of CB. The crude fiber digestibility value of the WSPCB has an opositephenomenon in which the ADCF and TDCF of WSPCB-SmF were greater than CB. In conclusion, thenutrient digestibility value, except for ADCF and TDCF, of the WSPCB on the laying hens were lowerin value than those CB.

  16. Effects of the initial cell concentration on the alcoholic fermentation of cassava

    Energy Technology Data Exchange (ETDEWEB)

    Doin, P.A.; Olivo, J.E.; Varella, V.L.; Concone, B.R.; Pinto, A.G.

    1984-01-01

    Cassava is being considered in Brazil as the main alternative to sugarcane for the production of ethanol for industrial and fuel purposes, and efforts are being made to improve this technology. Among the possible improvements one of the most important is the increase in the saccharification and fermentation yields and productivities when these operators are accomplished simultaneously. In this work, using Saccharomyces cerevisiae, ethanol fermentations from cassava starch were carried out as a function of cell concentration ranging from 0.3 to 15.0 g/l. The main conclusions were that ethanol productivities and yields were not affected by the initial cell concentration unless this was below 0.3 to 0.6 g/l (dry base). Average ethanol productivities of about 4.0%/h were consistently obtained with ethanol yields ranging from 85 to 90%. Concerning reaction rates, it was found that unless very low values of initial cell concentration were used, the saccharification become the limiting step of the overall process.

  17. High Efficient Cultivation of Cassava Intercropped with Andrographis paniculata (Burm. f.) Nee%木薯间作套种穿心莲高效栽培技术①

    Institute of Scientific and Technical Information of China (English)

    陆柳英; 李灿荣; 曾文丹; 谢向誉; 严华兵

    2016-01-01

    As the important tuber crop in the world, cassava is the guarantee of food security in the tropics, and the important industrial raw materials of starch. In order to promote the development of the cassava industry and improve the planting comparative economic efficiency of cassava, we summarizes a set of mature cultivation techniques according to the experience of planting management of the cassava intercropping A ndrographis paniculata (Burm. f.) Nee in pingnan. It will provide a technical support for the standardized cultivation and production of cassava.%木薯作为全球重要的薯类作物,既是热带地区粮食安全的保障,也是重要的淀粉工业原料。为促进木薯产业的发展,提高木薯种植比较经济效益,根据我区木薯间作套种中药材穿心莲在平南县的种植管理经验,总结出一套成熟的木薯间作套种穿心莲栽培技术,为木薯间作套种规范化栽培和生产提供技术支撑。

  18. 木薯优良新品种‘桂垦09-26’的选育与栽培%The Breeding and Cultivation Techniques of New Cassava Variety ‘Guiken 09-26’

    Institute of Scientific and Technical Information of China (English)

    刘连军; 李恒锐; 黎萍; 农秋连; 杨海霞; 青鑫; 梁振华; 郭素云; 卢美瑛

    2016-01-01

    According to the current status of Guangxi cassava industrial and the goal to increase cassava yield per unit area and starch content,excellent integrated traits new varieties of cassava ———GK09-26 was breed out by using parents of“SC5 ×SC205”. Experiment results show that the new cassava variety ‘GK09-26’showed good yield performance,excel-lent quality and strong resistance characteristics. It has good application and dissemination prospects in cassava production.%针对当前广西木薯产业发展现状,以提高木薯单位面积产量与淀粉含量为目标,利用“华南5号×华南205”进行品种间杂交,培育出高产、高淀粉含量、综合性状优良的木薯新品种———桂垦09-26。多个试验结果表明,‘桂垦09-26’木薯新品种具有良好的增产效果和优良品质及抗逆性强的特点,在木薯生产上有良好的推广应用前景。

  19. Scientific and Technical Demand and Current Situations of Cassava Biomass Energy Industry in China%我国木薯生物质能源产业发展现状与科技需求

    Institute of Scientific and Technical Information of China (English)

    韦昌联; 卢柳忠; 黎贞崇

    2012-01-01

    Based on the analysis of current situations of cassava biomass energy industry in China and the relative advances in science and technology,the major existed problems in this industry were put forward.Furthermore,scientific and technical demands for further development of cassava biomass energy industry were discussed covering the following aspects:strengthening the research on the culture and the matching cultivation technology of new varieties of high-yield high-starch cassava,launching the development of cassava full-process automated manufacturing equipments,strengthening the research on cassava comprehensive utilization and the development of new cassava products,and strengthening the research on the recycle use of cassava waste and the relative techniques.%在分析我国木薯生物质能源产业现状和科技发展进展的基础上,指出了当前木薯生物质能源产业科技发展存在的主要问题。提出了下一步产业发展的科技需求,重点是加强高产高粉木薯新品种培育和配套栽培技术研究,开展木薯全程机械化系列产品的研发,加强木薯综合利用技术和产品攻关及木薯废弃物的资源化利用技术的研发力度。

  20. Effect of chemical and mechanical weed control on cassava yield, soil quality and erosion under cassava cropping system

    Science.gov (United States)

    Islami, Titiek; Wisnubroto, Erwin; Utomo, Wani

    2016-04-01

    Three years field experiments were conducted to study the effect of chemical and mechanical weed control on soil quality and erosion under cassava cropping system. The experiment were conducted at University Brawijaya field experimental station, Jatikerto, Malang, Indonesia. The experiments were carried out from 2011 - 2014. The treatments consist of three cropping system (cassava mono culture; cassava + maize intercropping and cassava + peanut intercropping), and two weed control method (chemical and mechanical methods). The experimental result showed that the yield of cassava first year and second year did not influenced by weed control method and cropping system. However, the third year yield of cassava was influence by weed control method and cropping system. The cassava yield planted in cassava + maize intercropping system with chemical weed control methods was only 24 t/ha, which lower compared to other treatments, even with that of the same cropping system used mechanical weed control. The highest cassava yield in third year was obtained by cassava + peanuts cropping system with mechanical weed control method. After three years experiment, the soil of cassava monoculture system with chemical weed control method possessed the lowest soil organic matter, and soil aggregate stability. During three years of cropping soil erosion in chemical weed control method, especially on cassava monoculture, was higher compared to mechanical weed control method. The soil loss from chemical control method were 40 t/ha, 44 t/ha and 54 t/ha for the first, second and third year crop. The soil loss from mechanical weed control method for the same years was: 36 t/ha, 36 t/ha and 38 t/ha. Key words: herbicide, intercropping, soil organic matter, aggregate stability.

  1. Potato starch synthases

    NARCIS (Netherlands)

    Nazarian-Firouzabadi, Farhad; Visser, Richard G.F.

    2017-01-01

    Starch, a very compact form of glucose units, is the most abundant form of storage polyglucan in nature. The starch synthesis pathway is among the central biochemical pathways, however, our understanding of this important pathway regarding genetic elements controlling this pathway, is still

  2. Potato starch synthases

    NARCIS (Netherlands)

    Nazarian-Firouzabadi, Farhad; Visser, Richard G.F.

    2017-01-01

    Starch, a very compact form of glucose units, is the most abundant form of storage polyglucan in nature. The starch synthesis pathway is among the central biochemical pathways, however, our understanding of this important pathway regarding genetic elements controlling this pathway, is still insuffic

  3. Characterization of cassava clones produced in Roraima for in natura consumption. = Caracterização e identificação de clones de mandioca produzidos em Roraima para o consumo in natura.

    Directory of Open Access Journals (Sweden)

    Natália Trajano de Oliveira

    2011-12-01

    Full Text Available The objective of this study was to characterize and identify cassava clones produced in Roraima State, Brazil, for human consumption. There was the planting of six clones of cassava (Aciolina, Pão, Pão-do-Chile, Água Morna, Enxuta and Amazonas, in double rows, following the spacing of 2.0 m x 0.8 m x 0.8 m, total of 8,928 plants ha-1 . It was used randomized blocks experimental design with four replications. At eight months after planting was carried out to harvest the roots, being evaluated for hydrocyanic acid, starch content by the method of hydrostatic balance and artisanal mining, ability to release the film and bark, bark color and flesh color raw. The cassava clones were classified according to HCN content in: Mansi (Enxuta and Pão-do-Chile, intermediate (Aciolina and Água Morna and Brava (Pão and Amazonas. The starch obtained by the method of hydrostatic balance overestimates the starch content by the method artisanal mining. The Aciolina clone stood out among the clones for human consumption, it is also recommended for industrial use. The Pão and Amazonas clones have restrictions for both human consumption and for industrial used.

  4. Starch Bioengineering in Barley

    DEFF Research Database (Denmark)

    Shaik, Shahnoor Sultana

    the wild-type cultivar. These exciting results may provide a potential clean technological approach to starch modification by in-planta bioengineering and avoid environmental hazards resulting from post-harvest treatments by chemical modifications. The third study was to investigate the effects...... involved in this process, has enabled the genetic modification f crops in a rational manner to produce novel designer starches with improved functionality. The hypothesis of the present study is that the hyper-phosphorylation of cereal endosperm starch makes it easily accessible and degradable...... by the amylolytic enzymes while the amylose-only endosperm starch exhibits high resistance to degradation and hence less available for degradation. With the aim to investigate the hypothesis, starch molecular structures were modulated with the above mentioned modifications and were studied for the effects...

  5. Molecular analysis of differentially expressed genes during postharvest deterioration in cassava (Manihot esculenta Crantz) tuberous roots

    NARCIS (Netherlands)

    Huang, J.; Bachem, C.W.B.; Jacobsen, E.; Visser, R.

    2001-01-01

    One of the major problems for cassava is the rapid deterioration after harvesting cassava tuberous roots, which limits the possibilities for production and distribution of cassava in the world. Postharvest deterioration is an inherent problem for cassava since wounding and mechanical damage of the t

  6. Extrusion of blends of cassava leaves and cassava flour: physical characteristics of extrudates

    Directory of Open Access Journals (Sweden)

    Cristiane da Cunha Salata

    2014-09-01

    Full Text Available A cassava-based puffed snack was produced using a single screw extruder to determine the effect of the raw material composition (cassava leaf flour and moisture and the process parameters (extrusion temperature and screw speed on the physical characteristics of an extruded-expanded snack. A central composite rotational design, including four factors with 30 treatments, was used with the following as dependent variables: expansion index, specific volume, water solubility index, water absorption index, color (L*, a*, b*, and hardness. Under conditions of low moisture content (12 to 14%, low percentage of cassava leaf flour (2 to 4%, and intermediate conditions of extrusion temperature (100°C and screw speed (230rpm, it was possible to obtain puffed snack products with desirable characteristics.

  7. Rehydration characteristics and modeling of cassava chips

    Directory of Open Access Journals (Sweden)

    Ajala, A.S

    2015-05-01

    Full Text Available Cassava chips with dimension 4x2x0.2cm were re-hydrated in distilled water at 200C, 300C and 400C in a laboratory water bath. Kinetics of re-hydration was investigated using three different re-hydration models namely Peleg, exponential and Weibull. The pattern of water absorption was observed to be faster at the initial period of soaking. Higher temperature induces faster moisture absorption in the chips. Non linear regression analysis was used to fit in the experimental data and the coefficient of determination was found to be greater than 0.72 for all the models. The values of R2 , RMSE, MBE and reduced chi square showed that Weibull model best described the re-hydrating behaviour of the cassava chips.

  8. In vitro ruminal fermentation kinetic of diets containing forage cactus with urea and different starch sources

    Directory of Open Access Journals (Sweden)

    Yann dos Santos Luz

    2014-06-01

    Full Text Available The study was conducted to evaluate fermentation kinetic of diets based on cactus forage enriched with urea and Tifton 85 hay, containing different starch sources, using semi-automated in vitro gas production technique. Treatments were disposed in a randomized block design, with four replications, where concentrates were formulated as follows: cassava roots (FSMa, semi flint corn grains (FSMiSD, dent corn grains (FSMiD and wheat bran (FTMa. All diets were formulated to obtain 15% of crude protein. Gas pressure were measured 2, 4, 6, 8, 10, 12, 15, 18, 21, 24, 30, 36, 48, 72 and 96 h after inoculation. For fast phase maximum gas volume (Vf1, both treatments containing corn did not differ (P>0.05. FTMa differed (P<0.05 from diets composed with corn, as main starch source. Specific degradation rate of fast fraction (Kd1 was higher (P<0.05 on FSMa and FTMa diets, compared with corn diets. Colonization time (L showed lower values (P<0.05 for FTMa diet. The lowest total gas production was observed on FTMa and the highest for FSMiD, varying from 225.49 to 268.31 mL/g, respectively. Cassava roots as starch source contributes to a faster fermentation, compared to both corns, allowing a better synchronization with faster degradation nitrogen sources.

  9. Expression pattern conferred by a glutamic acid-rich protein gene promoter in field-grown transgenic cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Beltrán, J; Prías, M; Al-Babili, S; Ladino, Y; López, D; Beyer, P; Chavarriaga, P; Tohme, J

    2010-05-01

    A major constraint for incorporating new traits into cassava using biotechnology is the limited list of known/tested promoters that encourage the expression of transgenes in the cassava's starchy roots. Based on a previous report on the glutamic-acid-rich protein Pt2L4, indicating a preferential expression in roots, we cloned the corresponding gene including promoter sequence. A promoter fragment (CP2; 731 bp) was evaluated for its potential to regulate the expression of the reporter gene GUSPlus in transgenic cassava plants grown in the field. Intense GUS staining was observed in storage roots and vascular stem tissues; less intense staining in leaves; and none in the pith. Consistent with determined mRNA levels of the GUSPlus gene, fluorometric analyses revealed equal activities in root pulp and stems, but 3.5 times less in leaves. In a second approach, the activity of a longer promoter fragment (CP1) including an intrinsic intron was evaluated in carrot plants. CP1 exhibited a pronounced tissue preference, conferring high expression in the secondary phloem and vascular cambium of roots, but six times lower expression levels in leaf vascular tissues. Thus, CP1 and CP2 may be useful tools to improve nutritional and agronomical traits of cassava by genetic engineering. To date, this is the first study presenting field data on the specificity and potential of promoters for transgenic cassava.

  10. Enzyme-Catalyzed Regioselective Modification of Starch Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Soma [Polytechnic Univ., Brooklyn, NY (United States). National Science Foundation (NSF) Center for Biocatalysis and Bioprocessing of Macromolecules, Othmer Dept. of Chemical and Biological Science and Engineering; Sahoo, Bishwabhusan [Polytechnic Univ., Brooklyn, NY (United States). National Science Foundation (NSF) Center for Biocatalysis and Bioprocessing of Macromolecules, Othmer Dept. of Chemical and Biological Science and Engineering; Teraoka, Iwao [Polytechnic Univ., Brooklyn, NY (United States). National Science Foundation (NSF) Center for Biocatalysis and Bioprocessing of Macromolecules, Othmer Dept. of Chemical and Biological Science and Engineering; Miller, Lisa M. [Brookhaven National Lab. (BNL), Upton, NY (United States). National Synchrotron Light Source (NSLS); Gross, Richard A. [Polytechnic Univ., Brooklyn, NY (United States). National Science Foundation (NSF) Center for Biocatalysis and Bioprocessing of Macromolecules, Othmer Dept. of Chemical and Biological Science and Engineering

    2004-12-13

    The selective esterification of starch nanoparticles was performed using as catalyst Candida antartica Lipase B (CAL-B) in its immobilized (Novozym 435) and free (SP-525) forms. The starch nanoparticles were made accessible for acylation reactions by formation of Aerosol-OT (AOT, bis(2-ethylhexyl)sodium sulfosuccinate) stabilized microemulsions. Starch nanoparticles in microemulsions were reacted with vinyl stearate, ε-caprolactone, and maleic anhydride at 40 °C for 48 h to give starch esters with degrees of substitution (DS) of 0.8, 0.6, and 0.4, respectively. Substitution occurred regioselectively at the C-6 position of the glucose repeat units. Infrared microspectroscopy (IRMS) revealed that AOT-coated starch nanoparticles diffuse into the outer 50 μm shell of catalyst beads. Thus, even though CAL-B is immobilized within a macroporous resin, CAL-B is sufficiently accessible to the starch nanoparticles. When free CAL-B was incorporated along with starch within AOT-coated reversed micelles, CAL-B was also active and catalyzed the acylation with vinyl stearate (24 h, 40 °C) to give DS = 0.5. After removal of surfactant from the modified starch nanoparticles, they were dispersed in DMSO or water and were shown to retain their nanodimensions.

  11. Development of an Electrically Operated Cassava Peeling and Slicing Machine

    Directory of Open Access Journals (Sweden)

    I. S. Aji

    2017-08-01

    Full Text Available The development and construction of an electrically operated cassava peeling and slicing machine was described in this paper. The objective was to design, construct and test an electrically operated machine that will peel and slice cassava root into chips, to aid the processes of drying, pelletizing and storage. The methodology adopted includes; design, construction, calculation, specification, assembly of component parts and performance test. The machine was able to Peel and slice cassava to fairly similar sizes. Performance test reveals that 7 kg of cassava tuber was peeled and chipped in one minute, which shows that, the machine developed can significantly reduce the cost of labour and time wastage associated with traditional processing of cassava tubers into dried cassava pellets, and finished products, such as; garri, and cassava flour. The machine has a capacity of 6.72 kg/min, with peeling and chipping efficiency of 66.2% and 84.0% respectively. The flesh loss of the peeled tuber was 8.52%, while overall machine efficiency obtained as 82.4%. The machine is recommended for use by small scale industries and by cassava farmers in the rural areas. It has an overall cost of N46100 ($150. The machine can easily be operated by an individual and maintained, by using warm water to wash the component parts, and sharpening of the chipping disc when required.

  12. Information Needs of Cassava Farmers in Delta State of Nigeria

    African Journals Online (AJOL)

    of cassava development into new growth markets have attracted ... study assessed the information needs of cassava farmers in Oshimili North Local Government Area of Delta. State. Specifically ... rural farmers. This study .... sources such as extension worker, radio, television .... should be revitalized to complement the little.

  13. Evaluation of cryogenic procedures for cryopreservation of Cassava genotypes

    Science.gov (United States)

    Cassava (Manihot esculent Crantz) is a perennial plant widely grown in many tropical countries as one of the most important commercial crops. The global cassava production in 2009 was at 242 million tons. Because of its economic importance to a large number of developing world, the application of ad...

  14. Understanding the productivity of cassava in West Africa

    NARCIS (Netherlands)

    Ezui, Kodjovi Senam

    2017-01-01

    Drought stress and sub-optimal soil fertility management are major constraints to crop production in general and to cassava (Manihot esculenta Crantz) in particular in the rain-fed cropping systems in West Africa. Cassava is an important source of calories for millions of smallholder households in s

  15. Biofortified yellow cassava and Vitamin A status of Kenyan children

    NARCIS (Netherlands)

    Talsma, E.F.; Brouwer, I.D.; Verhoef, Hans; Mbera, G.N.K.; Mwangi, A.M.; Demir, A.Y.; Maziya-Dixon, B.; Boy, Erick; Zimmermann, M.B.; Melse-Boonstra, Alida

    2016-01-01

    Background: Whereas conventional white cassava roots are devoid of provitamin A, biofortified yellow varieties are naturally rich in b-carotene, the primary provitamin A carotenoid. Objective: We assessed the effect of consuming yellow cassava on serum retinol concentration in Kenyan schoolchildr

  16. Development and application of transgenic technologies in cassava

    NARCIS (Netherlands)

    Taylor, N.; Chavarriaga, P.; Raemakers, C.J.J.M.; Sititunga, D.; Zhang, P.

    2004-01-01

    The capacity to integrate transgenes into the tropical root crop cassava (Manihot esculenta Crantz) is now established and being utilized to generate plants expressing traits of agronomic interest. The tissue culture and gene transfer systems currently employed to produce these transgenic cassava

  17. Physiological causes of yield variation in Cassava (Manihot esculenta Crantz)

    NARCIS (Netherlands)

    Veltkamp, H.J.

    1985-01-01

    Cassava (Manihot esculenta Crantz) is an important crop in many parts of the tropics, being mainly cultivated for its storage roots. Farmers' yields are low and one of the constraints to higher yields is the lack of adequate clones. At the beginning of the 1970s an extensive cassava research program

  18. The potential of using biotechnology to improve cassava: a review.

    Science.gov (United States)

    Chavarriaga-Aguirre, Paul; Brand, Alejandro; Medina, Adriana; Prías, Mónica; Escobar, Roosevelt; Martinez, Juan; Díaz, Paula; López, Camilo; Roca, Willy M; Tohme, Joe

    2016-01-01

    The importance of cassava as the fourth largest source of calories in the world requires that contributions of biotechnology to improving this crop, advances and current challenges, be periodically reviewed. Plant biotechnology offers a wide range of opportunities that can help cassava become a better crop for a constantly changing world. We therefore review the state of knowledge on the current use of biotechnology applied to cassava cultivars and its implications for breeding the crop into the future. The history of the development of the first transgenic cassava plant serves as the basis to explore molecular aspects of somatic embryogenesis and friable embryogenic callus production. We analyze complex plant-pathogen interactions to profit from such knowledge to help cassava fight bacterial diseases and look at candidate genes possibly involved in resistance to viruses and whiteflies-the two most important traits of cassava. The review also covers the analyses of main achievements in transgenic-mediated nutritional improvement and mass production of healthy plants by tissue culture and synthetic seeds. Finally, the perspectives of using genome editing and the challenges associated to climate change for further improving the crop are discussed. During the last 30 yr, great advances have been made in cassava using biotechnology, but they need to scale out of the proof of concept to the fields of cassava growers.

  19. Primary and cyclic somatic embryogenesis in cassava (Manihot esculente Crantz).

    NARCIS (Netherlands)

    Raemakers, C.J.J.M.

    1993-01-01

    Cassava is one of the major food crops in the tropics. Several of the major problems in cassava can probably only be solved by breeding with cellular and molecular techniques, e.g., the introduction of specific genes (virus resistance, protein content, quality aspects and so on). These genes can be

  20. Assessment of Heavy Metal Contamination in Soils around Cassava ...

    African Journals Online (AJOL)

    treatment. Apart from the fact that cassava effluents contain high cyanide content which has adverse ... cottage industries such as cassava processing in ...... European. Soil Bureau Research Report No. 4. Office of. Official Publication of the ... irrigation using waste water on heavy metal ... Biological Sciences 7(2): 405-408.

  1. Cassava leaves as protein source for pigs in Central Vietnam

    NARCIS (Netherlands)

    2007-01-01

    The aim of the studies described in this thesis was to evaluate the use of cassava leaves as protein sources for pigs when used at high levels in the diet, either in fresh form or with simplified methods of processing. In twenty cassava varieties taken from the upper part of the plant at the root

  2. Development and application of transgenic technologies in cassava

    NARCIS (Netherlands)

    Taylor, N.; Chavarriaga, P.; Raemakers, C.J.J.M.; Sititunga, D.; Zhang, P.

    2004-01-01

    The capacity to integrate transgenes into the tropical root crop cassava (Manihot esculenta Crantz) is now established and being utilized to generate plants expressing traits of agronomic interest. The tissue culture and gene transfer systems currently employed to produce these transgenic cassava ha

  3. Socio-economic Analysis of Cassava Marketing in Benue State, Nigeria

    OpenAIRE

    Benjamin C. Asogwa; J. A. C. Ezihe; P.I. Ater

    2013-01-01

    The purpose of this study is to analyze the socio-economics of cassava marketing in Benue State, Nigeria. Data were collected from randomly sampled 107 cassava marketers in Benue State, using a structured questionnaire. The study revealed that most of the cassava marketers had secondary education (72.9%). The study also revealed that marketing of cassava is mostly undertaken by females (57%). The result showed that married people (59.8%) were mostly involved in the marketing of cassava. The s...

  4. Effect of cassava mosaic disease, soil fertility, plant spacing and their interactions on cassava yields in Zanzibar

    NARCIS (Netherlands)

    Spittel, M.C.; Huis, van A.

    2000-01-01

    Cassava Mosaic Disease (CMD) and low soil fertility are limiting factors for the production of the preferred cassava varWiety Kibiriti mwekundu on the northern part of the island of Pemba in Zanzibar. Because CMD severity, assessed 7 months after planting in shifting cultivation fields at wide spaci

  5. Yellow cassava: efficacy of provitamin A rich cassava on improvement of vitamin A status in Kenyan schoolchildren

    NARCIS (Netherlands)

    Talsma, E.F.

    2014-01-01

    Background: Biofortified yellow cassava has great potential to alleviate vitamin A deficiency in sub-Saharan Africa and can be used as a complementary approach to other interventions. However, direct evidence whether yellow cassava can significantly contribute to the vitamin A

  6. Yellow cassava: efficacy of provitamin A rich cassava on improvement of vitamin A status in Kenyan schoolchildren

    NARCIS (Netherlands)

    Talsma, E.F.

    2014-01-01

    Background: Biofortified yellow cassava has great potential to alleviate vitamin A deficiency in sub-Saharan Africa and can be used as a complementary approach to other interventions. However, direct evidence whether yellow cassava can significantly contribute to the vitamin A intak

  7. Unveiling the Micronome of Cassava (Manihot esculenta Crantz).

    Science.gov (United States)

    Rogans, Sarah Jane; Rey, Chrissie

    2016-01-01

    MicroRNAs (miRNAs) are an important class of endogenous non-coding single-stranded small RNAs (21-24 nt in length), which serve as post-transcriptional negative regulators of gene expression in plants. Despite the economic importance of Manihot esculenta Crantz (cassava) only 153 putative cassava miRNAs (from multiple germplasm) are available to date in miRBase (Version 21), and identification of a number of miRNAs from the cassava EST database have been limited to comparisons with Arabidopsis. In this study, mature sequences of all known plant miRNAs were used as a query for homologous searches against cassava EST and GSS databases, and additional identification of novel and conserved miRNAs were gleaned from next generation sequencing (NGS) of two cassava landraces (T200 from southern Africa and TME3 from West Africa) at three different stages post explant transplantation and acclimatization. EST and GSS derived data revealed 259 and 32 miRNAs in cassava, and one of the miRNA families (miR2118) from previous studies has not been reported in cassava. NGS data collectively displayed expression of 289 conserved miRNAs in leaf tissue, of which 230 had not been reported previously. Of the 289 conserved miRNAs identified in T200 and TME3, 208 were isomiRs. Thirty-nine novel cassava-specific miRNAs of low abundance, belonging to 29 families, were identified. Thirty-eight (98.6%) of the putative new miRNAs identified by NGS have not been previously reported in cassava. Several miRNA targets were identified in T200 and TME3, highlighting differential temporal miRNA expression between the two cassava landraces. This study contributes to the expanding knowledge base of the micronome of this important crop.

  8. Use of indigenous technology for the production of High Quality Cassava Flour with similar food qualities as wheat flour

    Directory of Open Access Journals (Sweden)

    Ogbonnaya Chinedum Eleazu

    2014-09-01

    Full Text Available Background. The aim of the paper was to compare the food qualities of 2 varieties (SME 1 and 2 of high quality cassava flour (HQCF produced from indigenous technology and that of some commercially sold wheat/HQCF samples. Material and methods. The pH, proximate, phytochemical, antioxidant, functional properties and starch yield of the flours were carried out using standard techniques. Results. The wheat flours had higher bulk densities and lipids than the HQCF samples while the oil absorption capacity of the HQCF (SME 2 was higher than other fl our samples investigated. The antioxidant assays of the flours showed that they contained considerable levels of antioxidants with the HQCF sample from DAT having higher antioxidants than other flour samples studied. The HQCF (SME 1 had signifi cantly higher (P < 0.05 starch content among the flour samples. The bacteria counts of the HQCF samples ranged from 0 to 1.4 × 104 cfu/ml while the fungal count ranged from 0 to 2 × 10-3 with the unbranded wheat fl our having the highest microbial load compared with other flour samples studied. Conclusion. The use of this indigenous technology produces HQCF with lower lipids, microbial contamination but higher flavour retaining ability, flavonoids and starch contents than wheat flour. The signifi cant positive correlation (R2 = 0.872 between reducing power of the samples and their DPPH antioxidant activity indicate that either could be used to assay for the total antioxidant activity of cassava and wheat flour. The study underscores the need to buy flour from branded companies to reduce the risks of microbial contamination.

  9. Association mapping of starch chain length distribution and amylose content in pea (Pisum sativum L.) using carbohydrate metabolism candidate genes.

    Science.gov (United States)

    Carpenter, Margaret A; Shaw, Martin; Cooper, Rebecca D; Frew, Tonya J; Butler, Ruth C; Murray, Sarah R; Moya, Leire; Coyne, Clarice J; Timmerman-Vaughan, Gail M

    2017-08-01

    Although starch consists of large macromolecules composed of glucose units linked by α-1,4-glycosidic linkages with α-1,6-glycosidic branchpoints, variation in starch structural and functional properties is found both within and between species. Interest in starch genetics is based on the importance of starch in food and industrial processes, with the potential of genetics to provide novel starches. The starch metabolic pathway is complex but has been characterized in diverse plant species, including pea. To understand how allelic variation in the pea starch metabolic pathway affects starch structure and percent amylose, partial sequences of 25 candidate genes were characterized for polymorphisms using a panel of 92 diverse pea lines. Variation in the percent amylose composition of extracted seed starch and (amylopectin) chain length distribution, one measure of starch structure, were characterized for these lines. Association mapping was undertaken to identify polymorphisms associated with the variation in starch chain length distribution and percent amylose, using a mixed linear model that incorporated population structure and kinship. Associations were found for polymorphisms in seven candidate genes plus Mendel's r locus (which conditions the round versus wrinkled seed phenotype). The genes with associated polymorphisms are involved in the substrate supply, chain elongation and branching stages of the pea carbohydrate and starch metabolic pathways. The association of polymorphisms in carbohydrate and starch metabolic genes with variation in amylopectin chain length distribution and percent amylose may help to guide manipulation of pea seed starch structural and functional properties through plant breeding.

  10. Influence of Growing Period on the Properties of SC9 Cassava Cultivated in Guangxi%生长期对广西产地华南9号木薯品质特性的影响

    Institute of Scientific and Technical Information of China (English)

    古碧; 李健; 龙罡; 黄一帆

    2014-01-01

    Influence of different growing period on the content of starch, hydrocyanic acid, tannin, inorganic arsenic and lead of SC9 cassava cultivated in Wuming, Longan, Hepu, Chongzuo, Guilin and Wuzhou were researched in this article. Content of starch, hydrocyanic acid, inorganic arsenic and lead of SC9 cassava were determined by GB/T 5009. Content of tannin of SC9 cassava was determined by GB/T 15686. The Results showed that the content of starch, hydrocyanic acid and tannin of SC9 cassava were different from the extension of growing period. The content of starch was higher when growing period of SC9 was 8 to 10 months than others. The tannin content of SC9 cassava cultivated in most regions was lowest when the growing period was 9 to 10 months. The content of inorganic arsenic and lead of SC9 cassava were 0.08~0.26 mg/kg, 0.24~0.55 mg/kg respectively. The content of starch was high and content of hydrocyanic acid, tannin was low when the growing periods of SC9 cassava was 10 months. It was suitable for processing edible cassava starch.%根据GB/T 5009测定华南9号(SC9)木薯含粉率、氢氰酸、无机砷(As)和铅(Pb),根据GB/T 15686测定SC9品种的单宁含量,研究不同生长期对种植在广西武鸣、隆安、合浦、崇左、桂林和梧州6个地方的SC9木薯含粉率、氢氰酸、单宁、 As及Pb含量的影响。结果表明:种植在不同地方的SC9木薯含粉率、氢氰酸和单宁会随着生长期的延长表现出不同的变化趋势,其含粉率在生长期为8、9、10个月时较高,氢氰酸含量在生长期为10、12个月时相对较低,大部分地区的SC9木薯单宁含量在生长期为9个月和10个月时最低; SC9鲜木薯中的As和Pb含量分别为0.08~0.26、0.24~0.55 mg/kg。此结果表明, SC9木薯在生长期10个月时获得了高含粉率、低氢氰酸、低单宁含量的木薯块根,较适合用于食用木薯淀粉的加工生产。

  11. Development of Jackfruit Crackers: Effects of Starch Type and Jackfruit Level

    OpenAIRE

    Nor Afizah Mustapha; Fatin Farhanah Binti Rahmat; Wan Zunairah Wan Ibadullah; Anis Shobirin Meor Hussin

    2015-01-01

    Crackers are one of the convenient and inexpensive snacks that have high market potential.  Most of the commercial crackers are carbohydrate-rich and normally considered as a low value-added product.  In this study, innovative value added crackers made of jackfruit were developed.  The effect of starches (sago and cassava) and levels of jackfruit (30 and 50%, w/w) on characteristics of the crackers were investigated.  Physicochemical properties of the products at each predetermined processing...

  12. Resistant starches and health.

    Science.gov (United States)

    Kendall, Cyril W C; Emam, Azadeh; Augustin, Livia S A; Jenkins, David J A

    2004-01-01

    It was initially hypothesized that resistant starches, i.e., starch that enters the colon, would have protective effects on chronic colonic diseases, including reduction of colon cancer risk and in the treatment of ulcerative colitis. Recent studies have confirmed the ability of resistant starch to increase fecal bulk, increase the molar ratio of butyrate in relation to other short-chain fatty acids, and dilute fecal bile acids. However the ability of resistant starch to reduce luminal concentrations of compounds that are damaging to the colonic mucosa, including fecal ammonia, phenols, and N-nitroso compounds, still requires clear demonstration. As such, the effectiveness of resistant starch in preventing or treating colonic diseases remains to be assessed. Nevertheless, there is a fraction of what has been termed resistant (RS1) starch, which enters the colon and acts as slowly digested or lente carbohydrate in the small intestine. Foods in this class are low glycemic index and have been shown to reduce the risk of chronic disease. They have been associated with systemic physiological effects such as reduced postprandial insulin lev