Harmony Search Method: Theory and Applications

Directory of Open Access Journals (Sweden)

X. Z. Gao

2015-01-01

Full Text Available The Harmony Search (HS method is an emerging metaheuristic optimization algorithm, which has been employed to cope with numerous challenging tasks during the past decade. In this paper, the essential theory and applications of the HS algorithm are first described and reviewed. Several typical variants of the original HS are next briefly explained. As an example of case study, a modified HS method inspired by the idea of Pareto-dominance-based ranking is also presented. It is further applied to handle a practical wind generator optimal design problem.

CASE METHOD. ACTIVE LEARNING METHODOLOGY TO ACQUIRE SIGNIFICANT IN CHEMISTRY

Directory of Open Access Journals (Sweden)

Clotilde Pizarro

2015-09-01

Full Text Available In this paper the methodology of cases in first year students of the Engineering Risk Prevention and Environment is applied. For this purpose a real case of contamination occurred at a school in the region of Valparaiso called "La Greda" is presented. If the application starts delivering an extract of the information collected from the media and they made a brief induction on the methodology to be applied. A plenary session, which is debate about possible solutions to the problem and establishing a relationship between the case and drives the chemistry program is then performed. Is concluded that the application of the case method, was a fruitful tool in yields obtained by students, since the percentage of approval was 75%, which is considerably higher than previous years.

Primary exploration of the application of case based learning method in clinical probation teaching of the integrated curriculum of hematology

Institute of Scientific and Technical Information of China (English)

Zi-zhen XU; Ye-fei WANG; Yan WANG; Shu CHENG; Yi-qun HU; Lei DING

2015-01-01

Objective To explore the application and the effect of the case based learning(CBL)method in clinical probation teaching of the integrated curriculum of hematology among eight-year-program medical students.Methods The CBL method was applied to the experimental group,and the traditional approach for the control group.After the lecture,a questionnaire survey was conducted to evaluate the teaching effect in the two groups.Results The CBL method efficiently increased the students’interest in learning and autonomous learning ability,enhanced their ability to solve clinical problems with basic theoretic knowledge and cultivated their clinical thinking ability.Conclusion The CBL method can improve the quality of clinical probation teaching of the integrated curriculum of hematology among eight-year-program medical students.

Test cases for interface tracking methods: methodology and current status

International Nuclear Information System (INIS)

Lebaigue, O.; Jamet, D.; Lemonnier, E.

2004-01-01

Full text of publication follows:In the past decade, a large number of new methods have been developed to deal with interfaces in the numerical simulation of two-phase flows. We have collected a set of 36 test cases, which can be seen as a tool to help engineers and researchers selecting the most appropriate method(s) for their specific fields of application. This set can be use: - To perform an initial evaluation of the capabilities of available methods with regard to the specificity of the final application and the most important features to be recovered from the simulation. - To measure the maximum mesh size to be used for a given physical problem in order to obtain an accurate enough solution. - To assess and quantify the performances of a selected method equipped with its set of physical models. The computation of a well-documented test case allows estimating the error due to the numerical technique by comparison with reference solutions. This process is compulsory to gain confidence and credibility on the prediction capabilities of a numerical method and its physical models. - To broaden the capabilities of a given numerical technique. The test cases may be used to identify the need for improvement of the overall numerical scheme or to determine the physical part of the model, which is responsible for the observed limitations. Each test case falls within one of the following categories: - Analytical solutions of well-known sets of equations corresponding to simple geometrical situations. - Reference numerical solutions of moderately complex problems, produced by accurate methods (e.g., boundary Fitted coordinate method) on refined meshes. - Separate effects analytical experiments. The presentation will suggest how to use the test cases for assessing the physical models and the numerical methods. The expected fallout of using test cases is indeed on the one hand to identify the merits of existing methods and on the other hand to orient further research towards

Use Case Evaluation (UCE): A Method for Early Usability Evaluation in Software Development

DEFF Research Database (Denmark)

Stage, Jan; Høegh, Rune Thaarup; Hornbæk, K.

2007-01-01

t is often argued that usability problems should be identified as early as possible during software development, but many usability evaluation methods do not fit well in early development activities. We propose a method for usability evaluation of use cases, a widely used representation of design...... ideas produced early in software development processes. The method proceeds by systematic inspection of use cases with reference to a set of guidelines for usable design. To validate the method, four evaluators inspected a set of use cases for a health care application....

Application of Canonical Effective Methods to Background-Independent Theories

Science.gov (United States)

Buyukcam, Umut

Effective formalisms play an important role in analyzing phenomena above some given length scale when complete theories are not accessible. In diverse exotic but physically important cases, the usual path-integral techniques used in a standard Quantum Field Theory approach seldom serve as adequate tools. This thesis exposes a new effective method for quantum systems, called the Canonical Effective Method, which owns particularly wide applicability in backgroundindependent theories as in the case of gravitational phenomena. The central purpose of this work is to employ these techniques to obtain semi-classical dynamics from canonical quantum gravity theories. Application to non-associative quantum mechanics is developed and testable results are obtained. Types of non-associative algebras relevant for magnetic-monopole systems are discussed. Possible modifications of hypersurface deformation algebra and the emergence of effective space-times are presented. iii.

Application of FMEA method in railway signalling projects

Directory of Open Access Journals (Sweden)

Szmel Dariusz

2017-06-01

Full Text Available The article presents the FMEA method application, which is relevant in verification of design of two separated railway signalling systems. The efficiency of the method at the stage of the design was discussed. The method was identified as an important element of safety management process and as safety analysis method, which is included in the Safety Case and is applied for the sake of safety arguments and its assessment. Safety process management comprises several phases and appropriate actions, linked with each other in the way to create safety life cycle consistent with system life cycle. The safety case is a set of documents demonstrating that the product is compliant with defined safety requirements including analysis that indicates the correctness of the design and the correct reaction of the system to the failures, with appropriate and requested fail-safe reaction. It is necessary that railway signalling system should fulfil SIL4 requirement and remain safe in case of occurrence any kind of single failure of the equipment considered as possible.

Application of the microscopic method in cutaneous leishmania diagnosis

Directory of Open Access Journals (Sweden)

Mohammed Wael Daboul

2011-10-01

Full Text Available Introduction: Cutaneous leishmania is spreading fast. This study aims at developing the microscopic method to achieve a full detection of all positive cases of leishmania.Methods: 50 human cases have been studied by applying microscopic smears stained with Wright stain. Microscopic photos were taken for the presumed unfamiliar figures.Results: Mononuclear cells with tails are present at a rate of (98%. They are associated with Leishman Donovan (LD bodies in 50% of the cases. The polygonal figures and the spherical forms are present at the same rate (60% and are associated with LD bodies in 24% of the cases. The small promastigote like forms are seen at a rate of (76% and are associated with LD bodies in 26% of the cases. The giant promastigotes like forms are present in (80% of the cases and are associated with LD bodies in 28% of the cases. Candle flame forms are present in (40% of the cases and are associated with the LD bodies in 21% of the cases.Discussion: It is applicable to use those discovered figures in diagnosing cutaneous leishmania.

Improving the applicant experience in the summer recruitment process of a case company

OpenAIRE

Rantanen, Inka

2015-01-01

This case study was based on the need to improve the case company’s summer recruitment process as an applicant experience. The research and develop aims were creating a framework for research by combining experience management to recruitment and selection in theory, analysing the current state of the applicant experience, and generating grounded development suggestions for enhancing it. Qualitative case study was used as the research method to meet the need to research experiences related to ...

The thin layer activation method and its applications in industry

International Nuclear Information System (INIS)

1997-01-01

The thin layer activation (TLA) method is one of the most effective and precise methods for the measurement and monitoring of corrosion (erosion) and wear in industry and is used for on-line remote measurement of wear and corrosion rate of central parts in machines or processing vessels under real operating conditions. This document is a comprehensive manual on TLA method in its applications for monitoring wear and corrosion in industry. It describes the theory and presents case studies on TLA method applications in industry. In addition, in annexes are given tables of nuclear data relating to TLA (decay characteristics, depth distribution of reaction products, activation data for charged-particle nuclear reactions), references from INIS database on TLA and a detailed production of the application of TLA for wear measurement of superhard turning tools

The thin layer activation method and its applications in industry

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

The thin layer activation (TLA) method is one of the most effective and precise methods for the measurement and monitoring of corrosion (erosion) and wear in industry and is used for on-line remote measurement of wear and corrosion rate of central parts in machines or processing vessels under real operating conditions. This document is a comprehensive manual on TLA method in its applications for monitoring wear and corrosion in industry. It describes the theory and presents case studies on TLA method applications in industry. In addition, in annexes are given tables of nuclear data relating to TLA (decay characteristics, depth distribution of reaction products, activation data for charged-particle nuclear reactions), references from INIS database on TLA and a detailed production of the application of TLA for wear measurement of superhard turning tools.

Successful case-based reasoning applications 2

CERN Document Server

Jain, Lakhmi

2014-01-01

Case-based reasoning paradigms offer automatic reasoning capabilities which are useful for the implementation of human like machines in a limited sense. This research book is the second volume in a series devoted to presenting Case-based reasoning (CBR) applications. The first volume, published in 2010, testified the flexibility of CBR, and its applicability in all those fields where experiential knowledge is available. This second volume further witnesses the heterogeneity of the domains in which CBR can be exploited, but also reveals some common directions that are clearly emerging in recent years. This book will prove useful to the application engineers, scientists, professors and students who wish to develop successful case-based reasoning applications.

Method for mapping population-based case-control studies: an application using generalized additive models

Directory of Open Access Journals (Sweden)

Aschengrau Ann

2006-06-01

Full Text Available Abstract Background Mapping spatial distributions of disease occurrence and risk can serve as a useful tool for identifying exposures of public health concern. Disease registry data are often mapped by town or county of diagnosis and contain limited data on covariates. These maps often possess poor spatial resolution, the potential for spatial confounding, and the inability to consider latency. Population-based case-control studies can provide detailed information on residential history and covariates. Results Generalized additive models (GAMs provide a useful framework for mapping point-based epidemiologic data. Smoothing on location while controlling for covariates produces adjusted maps. We generate maps of odds ratios using the entire study area as a reference. We smooth using a locally weighted regression smoother (loess, a method that combines the advantages of nearest neighbor and kernel methods. We choose an optimal degree of smoothing by minimizing Akaike's Information Criterion. We use a deviance-based test to assess the overall importance of location in the model and pointwise permutation tests to locate regions of significantly increased or decreased risk. The method is illustrated with synthetic data and data from a population-based case-control study, using S-Plus and ArcView software. Conclusion Our goal is to develop practical methods for mapping population-based case-control and cohort studies. The method described here performs well for our synthetic data, reproducing important features of the data and adequately controlling the covariate. When applied to the population-based case-control data set, the method suggests spatial confounding and identifies statistically significant areas of increased and decreased odds ratios.

Logic-based aggregation methods for ranking student applicants

Directory of Open Access Journals (Sweden)

Milošević Pavle

2017-01-01

Full Text Available In this paper, we present logic-based aggregation models used for ranking student applicants and we compare them with a number of existing aggregation methods, each more complex than the previous one. The proposed models aim to include depen- dencies in the data using Logical aggregation (LA. LA is a aggregation method based on interpolative Boolean algebra (IBA, a consistent multi-valued realization of Boolean algebra. This technique is used for a Boolean consistent aggregation of attributes that are logically dependent. The comparison is performed in the case of student applicants for master programs at the University of Belgrade. We have shown that LA has some advantages over other presented aggregation methods. The software realization of all applied aggregation methods is also provided. This paper may be of interest not only for student ranking, but also for similar problems of ranking people e.g. employees, team members, etc.

40 CFR 63.53 - Application content for case-by-case MACT determinations.

Science.gov (United States)

2010-07-01

... consistent with § 63.52(f). The owner or operator may recommend a specific design, equipment, work practice... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Application content for case-by-case... Act Sections, Sections 112(g) and 112(j) § 63.53 Application content for case-by-case MACT...

Application of linear scheduling method (LSM) for nuclear power plant (NPP) construction

International Nuclear Information System (INIS)

Kim, Woojoong; Ryu, Dongsoo; Jung, Youngsoo

2014-01-01

Highlights: • Mixed use of linear scheduling method with traditional CPM is suggested for NPP. • A methodology for selecting promising areas for LSM application is proposed. • A case-study is conducted to validate the proposed LSM selection methodology. • A case-study of reducing NPP construction duration by using LSM is introduced. - Abstract: According to a forecast, global energy demand is expected to increase by 56% from 2010 to 2040 (EIA, 2013). The nuclear power plant construction market is also growing with sharper competition. In nuclear power plant construction, scheduling is one of the most important functions due to its large size and complexity. Therefore, it is crucial to incorporate the ‘distinct characteristics of construction commodities and the complex characteristics of scheduling techniques’ (Jung and Woo, 2004) when selecting appropriate schedule control methods for nuclear power plant construction. However, among various types of construction scheduling techniques, the traditional critical path method (CPM) has been used most frequently in real-world practice. In this context, the purpose of this paper is to examine the viability and effectiveness of linear scheduling method (LSM) applications for specific areas in nuclear power plant construction. In order to identify the criteria for selecting scheduling techniques, the characteristics of CPM and LSM were compared and analyzed first through a literature review. Distinct characteristics of nuclear power plant construction were then explored by using a case project in order to develop a methodology to select effective areas of LSM application to nuclear power plant construction. Finally, promising areas for actual LSM application are suggested based on the proposed evaluation criteria and the case project. Findings and practical implications are discussed for further implementation

Application of linear scheduling method (LSM) for nuclear power plant (NPP) construction

Energy Technology Data Exchange (ETDEWEB)

Kim, Woojoong, E-mail: minidung@nate.com [Central Research Institute, Korea Hydro and Nuclear Power Co., Ltd, Daejeon 305-343 (Korea, Republic of); Ryu, Dongsoo, E-mail: energyboy@khnp.co.kr [Central Research Institute, Korea Hydro and Nuclear Power Co., Ltd, Daejeon 305-343 (Korea, Republic of); Jung, Youngsoo, E-mail: yjung97@mju.ac.kr [College of Architecture, Myongji University, Yongin 449-728 (Korea, Republic of)

2014-04-01

Highlights: • Mixed use of linear scheduling method with traditional CPM is suggested for NPP. • A methodology for selecting promising areas for LSM application is proposed. • A case-study is conducted to validate the proposed LSM selection methodology. • A case-study of reducing NPP construction duration by using LSM is introduced. - Abstract: According to a forecast, global energy demand is expected to increase by 56% from 2010 to 2040 (EIA, 2013). The nuclear power plant construction market is also growing with sharper competition. In nuclear power plant construction, scheduling is one of the most important functions due to its large size and complexity. Therefore, it is crucial to incorporate the ‘distinct characteristics of construction commodities and the complex characteristics of scheduling techniques’ (Jung and Woo, 2004) when selecting appropriate schedule control methods for nuclear power plant construction. However, among various types of construction scheduling techniques, the traditional critical path method (CPM) has been used most frequently in real-world practice. In this context, the purpose of this paper is to examine the viability and effectiveness of linear scheduling method (LSM) applications for specific areas in nuclear power plant construction. In order to identify the criteria for selecting scheduling techniques, the characteristics of CPM and LSM were compared and analyzed first through a literature review. Distinct characteristics of nuclear power plant construction were then explored by using a case project in order to develop a methodology to select effective areas of LSM application to nuclear power plant construction. Finally, promising areas for actual LSM application are suggested based on the proposed evaluation criteria and the case project. Findings and practical implications are discussed for further implementation.

Case-Cohort Studies: Design and Applicability to Hand Surgery.

Science.gov (United States)

Vojvodic, Miliana; Shafarenko, Mark; McCabe, Steven J

2018-04-24

Observational studies are common research strategies in hand surgery. The case-cohort design offers an efficient and resource-friendly method for risk assessment and outcomes analysis. Case-cohorts remain underrepresented in upper extremity research despite several practical and economic advantages over case-control studies. This report outlines the purpose, utility, and structure of the case-cohort design and offers a sample research question to demonstrate its value to risk estimation for adverse surgical outcomes. The application of well-designed case-cohort studies is advocated in an effort to improve the quality and quantity of observational research evidence in hand and upper extremity surgery. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Application of multi-locus analytical methods to identify interacting loci in case-control studies.

NARCIS (Netherlands)

Vermeulen, S.; Heijer, M. den; Sham, P.; Knight, J.

2007-01-01

To identify interacting loci in genetic epidemiological studies the application of multi-locus methods of analysis is warranted. Several more advanced classification methods have been developed in the past years, including multiple logistic regression, sum statistics, logic regression, and the

Applicability of transfer tensor method for open quantum system dynamics.

Science.gov (United States)

Gelzinis, Andrius; Rybakovas, Edvardas; Valkunas, Leonas

2017-12-21

Accurate simulations of open quantum system dynamics is a long standing issue in the field of chemical physics. Exact methods exist, but are costly, while perturbative methods are limited in their applicability. Recently a new black-box type method, called transfer tensor method (TTM), was proposed [J. Cerrillo and J. Cao, Phys. Rev. Lett. 112, 110401 (2014)]. It allows one to accurately simulate long time dynamics with a numerical cost of solving a time-convolution master equation, provided many initial system evolution trajectories are obtained from some exact method beforehand. The possible time-savings thus strongly depend on the ratio of total versus initial evolution lengths. In this work, we investigate the parameter regimes where an application of TTM would be most beneficial in terms of computational time. We identify several promising parameter regimes. Although some of them correspond to cases when perturbative theories could be expected to perform well, we find that the accuracy of such approaches depends on system parameters in a more complex way than it is commonly thought. We propose that the TTM should be applied whenever system evolution is expected to be long and accuracy of perturbative methods cannot be ensured or in cases when the system under consideration does not correspond to any single perturbative regime.

Formal methods and their applicability in the development of safety critical software systems

International Nuclear Information System (INIS)

Sievertsen, T.

1995-01-01

The OECD Halden Reactor Project has for a number of years been involved in the development and application of a formal software specification and development method based on algebraic specification and the HRP Prover. In parallel to this activity the Project has been evaluating and comparing different methods and approaches to formal software development by their application on realistic case examples. Recent work has demonstrated that algebraic specification and the HRP Prover can be used both in the specification and design of a software system, even down to a concrete model which can be translated into the chosen implementation language. The HRP Prover is currently being used in a case study on the applicability of the methodology in the development of a power range monitoring system for a nuclear power plant. The presentation reviews some of the experiences drawn from the Project's research activities in this area, with special emphasis on questions relating to applicability and limitations, and the role of formal methods in the development of safety-critical software systems. (14 refs., 1 fig.)

A resilience perspective to water risk management: case-study application of the adaptation tipping point method

Science.gov (United States)

Gersonius, Berry; Ashley, Richard; Jeuken, Ad; Nasruddin, Fauzy; Pathirana, Assela; Zevenbergen, Chris

2010-05-01

start the identification and analysis of adaptive strategies at the end of PSIR scheme: impact and examine whether, and for how long, current risk management strategies will continue to be effective under different future conditions. The most noteworthy application of this approach is the adaptation tipping point method. Adaptation tipping points (ATP) are defined as the points where the magnitude of change is such that the current risk management strategy can no longer meet its objectives. In the ATP method, policy objectives, determining aspirational functioning, are taken as the starting point. Also, the current measures to achieve these objectives are described. This is followed by a sensitivity analysis to determine the optimal and critical boundary conditions (state). Lastly, the state is related to pressures in terms of future change. It should be noted that in the ATP method the driver for adopting a new risk management strategy is not future change as such, but rather failing to meet the policy objectives. In the current paper, the ATP method is applied to the case study of an existing stormwater system in Dordrecht (the Netherlands). This application shows the potential of the ATP method to reduce the complexity of implementing a resilience-focused approach to water risk management. It is expected that this will help foster greater practical relevance of resilience as a perspective for the planning of water management structures.

Maximizing Product Innovation through Adaptive Application of User-Centered Methods for Defining Customer Value

Directory of Open Access Journals (Sweden)

Tonje Overvik Olsen

2011-12-01

Full Text Available Establishing deep understanding of customers is a prerequisite to improve success rates of innovations under today’s transient business conditions. This paper summarizes methods and tools to increase customer understanding in new product development. A case study of developing an office chair was conducted, utilizing four such methods (web based survey, interview, observation and workshops to provide directions for later application. Results indicate that methods revealing emotionally-related customer information (workshops and observation are resource-intensive and provide less amount of information directly applicable to the product development team. The opposite is the case for methods providing more functionally-related information (web based survey and interview. The overall conclusion is that the latter methods are more suitable for product improvements, while the former may provide valuable information for creating more differentiated products.

案例教学法在《战略管理》课程教学中的应用%Applications of Case Teaching Method to 'Strategic Management'

Institute of Scientific and Technical Information of China (English)

赵楠

2012-01-01

《战略管理》是一门应用型课程，理论性与现实性并重，传统教学法已不能满足其教学需要。案例教学法的运用有效激发了学生对课程的兴趣，提升学生综合能力的同时。也有助于教师专业技能的提升。在对案例教学法的特点和优势进行分析的基础上，探索案例教学法在《战略管理》课程中的灵活运用。%'Strategic management' is a practical course and paying equally attention to theory and practice. Traditional teaching method already cannot satisfy its need. The application of Case Teaching Method effectively stimulates the interest of students in the course, promotes the students' integrative competence, and contributes to teachers' professional skills simultaneously. On the basis of analyzing the characteristics and advantages of Case Teaching Method, the paper explores the flexible applications of Case Teaching Method to 'Strategic management'.

Application of the invariant embedding method to analytically solvable transport problems

Energy Technology Data Exchange (ETDEWEB)

Wahlberg, Malin

2005-05-01

The applicability and performance of the invariant embedding method for calculating various transport quantities is investigated in this thesis. The invariant embedding method is a technique to calculate the reflected or transmitted fluxes in homogeneous half-spaces and slabs, without the need for solving for the flux inside the medium. In return, the embedding equations become non-linear, and in practical cases they need to be solved by numerical methods. There are, however, fast and effective iterative methods available for this purpose. The objective of this thesis is to investigate the performance of these iterative methods in model problems, in which also an exact analytical solution can be obtained. Some of these analytical solutions are also new, hence their derivation constitutes a part of the thesis work. The cases investigated in the thesis all concern the calculation of reflected fluxes from half-spaces. The first problem treated was the calculation of the energy spectrum of reflected (sputtered) particles from a multiplying medium, where the multiplication arises from recoil production (i.e. like binary fission), when bombarded by o flux of monoenergetic particles of the same type. Both constant cross sections and energy dependent cross sections with a power law dependence were used in the calculations. The second class of problems concerned the calculation of the path length distribution of reflected particles from a medium without multiplication. It is an interesting new observation that the distribution of the path length travelled in the medium before reflection can be calculated with invariant embedding methods, which actually do not solve the flux distribution in the medium. We have tested the accuracy and the convergence properties of the embedding method also for this case. Finally, very recently a theory of connecting the infinite and half-space medium solutions by embedding-like integral equations was developed and reported in the literature

Application of the invariant embedding method to analytically solvable transport problems

International Nuclear Information System (INIS)

Wahlberg, Malin

2005-05-01

The applicability and performance of the invariant embedding method for calculating various transport quantities is investigated in this thesis. The invariant embedding method is a technique to calculate the reflected or transmitted fluxes in homogeneous half-spaces and slabs, without the need for solving for the flux inside the medium. In return, the embedding equations become non-linear, and in practical cases they need to be solved by numerical methods. There are, however, fast and effective iterative methods available for this purpose. The objective of this thesis is to investigate the performance of these iterative methods in model problems, in which also an exact analytical solution can be obtained. Some of these analytical solutions are also new, hence their derivation constitutes a part of the thesis work. The cases investigated in the thesis all concern the calculation of reflected fluxes from half-spaces. The first problem treated was the calculation of the energy spectrum of reflected (sputtered) particles from a multiplying medium, where the multiplication arises from recoil production (i.e. like binary fission), when bombarded by o flux of monoenergetic particles of the same type. Both constant cross sections and energy dependent cross sections with a power law dependence were used in the calculations. The second class of problems concerned the calculation of the path length distribution of reflected particles from a medium without multiplication. It is an interesting new observation that the distribution of the path length travelled in the medium before reflection can be calculated with invariant embedding methods, which actually do not solve the flux distribution in the medium. We have tested the accuracy and the convergence properties of the embedding method also for this case. Finally, very recently a theory of connecting the infinite and half-space medium solutions by embedding-like integral equations was developed and reported in the literature

Applications of an OO (Objected Oriented) methodology and case to a DAQ system

International Nuclear Information System (INIS)

Bee, C.P.; Eshghi, S.; Jones, R.

1996-01-01

The RD13 project has evaluated the use of the Object Oriented Information Engineering (OOIE) method during the development of several software components connected to the DAQ system. The method is supported by a sophisticated commercial CASE tool (Object Management Workbench) and programming environment (Kappa) which covers the full life-cycle of the software including model simulation, code generation and application deployment. This paper gives an overview of the method, CASE tool, DAD components which have been developed and we relate our experiences with the method and tool, its integration into our development environment and the spiral life cycle if supports. (author)

Application of a Novel Collaboration Engineering Method for Learning Design: A Case Study

Science.gov (United States)

Cheng, Xusen; Li, Yuanyuan; Sun, Jianshan; Huang, Jianqing

2016-01-01

Collaborative case studies and computer-supported collaborative learning (CSCL) play an important role in the modern education environment. A number of researchers have given significant attention to learning design in order to improve the satisfaction of collaborative learning. Although collaboration engineering (CE) is a mature method widely…

Application of Participatory Learning and Action Methods in Educational Technology Research A Rural Bangladeshi Case

DEFF Research Database (Denmark)

Khalid, Md. Saifuddin; Nyvang, Tom

2013-01-01

This chapter examines barriers and methods to identify barriers to educational technology in a rural technical vocational education and training institute in Bangladesh. It also examines how the application of participatory learning and action methods can provide information for barrier research ...

Review of GIF PR and PP Evaluation Case Study for Application to Pyroprocessing

Energy Technology Data Exchange (ETDEWEB)

Kim, H. M.; Ahn, S. K.; Kwon, E. H.; Kim, H. D. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection. The Generation IV International Forum (GIF) emphasizes proliferation resistance and physical protection (PR and PP) as one of the main aspects to be considered regarding future nuclear energy systems (NESs). As such, the PR and PP Working Group developed an evaluation methodology and applied it to the Example Sodium Fast Reactor (ESFR) as a case study. This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection.

Review of GIF PR and PP Evaluation Case Study for Application to Pyroprocessing

International Nuclear Information System (INIS)

Kim, H. M.; Ahn, S. K.; Kwon, E. H.; Kim, H. D.

2014-01-01

This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection. The Generation IV International Forum (GIF) emphasizes proliferation resistance and physical protection (PR and PP) as one of the main aspects to be considered regarding future nuclear energy systems (NESs). As such, the PR and PP Working Group developed an evaluation methodology and applied it to the Example Sodium Fast Reactor (ESFR) as a case study. This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection

Investigation of effective forensic cleaning methods for bullet and cartridge case samples

Science.gov (United States)

Shuherk, Cassie Marie

Bullet and cartridge case evidence may potentially link weapons and crimes through the comparison of toolmark patterns. This analysis relies on the clarity of the toolmarks and the ability of the examiner to identify patterns on the evidence. These patterns may be distorted by debris such as soil, blood, cyanoacrylate, and construction materials. Despite the potential importance of bullet and cartridge case evidence, few investigations of proper cleaning methods have been conducted. The present study was designed to examine the effects of various cleaning solutions and application methods on copper and brass bullets and cartridge cases. Additionally, this research investigated the efficacy of these cleaning protocols on the common evidence contaminants blood and cyanoacrylate. No cleaning method was found to be universally effective on both contaminant types and nondestructive to the metal surface. Ultrasonication was the most efficient application method employed when used in conjunction with an appropriate cleaning solution. Acetone proved to be safe and successful at removing heavy cyanoacrylate deposits from brass cartridge cases without damaging the metal. Although sulfuric acid removed most of the cyanoacrylate from the brass cartridge case, ultrasonication of the fumed cartridge cases in sulfuric acid caused the nickel-plated primer caps to turn black. Additionally, etching occurred when sulfuric acid was allowed to dry on the cartridge case surface. Citric acid, salt-flour-vinegar paste, TergazymeRTM, and water did not effectively remove the cyanoacrylate from the cartridge cases, but the solutions were safe to use on the brass and sometimes resulted in a shinier surface. Regardless of the cleaning method employed, the bloodstained bullets retained most or all of the underlying brown tarnish. Ultrasonication with sulfuric acid was successful at removing some blood-initiated tarnishing; however, the removal of residues was not complete, making it difficult

Knowledge-Based Approaches: Two cases of applicability

DEFF Research Database (Denmark)

Andersen, Tom

1997-01-01

Basic issues of the term: A knowledge-based approach (KBA) are discussed. Two cases of applicable to KBA are presented, and its concluded that KBA is more than just IT.......Basic issues of the term: A knowledge-based approach (KBA) are discussed. Two cases of applicable to KBA are presented, and its concluded that KBA is more than just IT....

Application Profile Matching Method for Employees Online Recruitment

Science.gov (United States)

Sunarti; Rangga, Rahmadian Y.; Marlim, Yulvia Nora

2017-12-01

Employees is one of the determinant factors of company’s success. Thus, reliable human resources are needed to support the survival of the company. This research takes case study at PT. Asuransi Bina Dana Arta, Tbk Pekanbaru Branch. Employee recruitment system at PT. Asuransi Bina Dana Arta, Tbk Pekanbaru Branch still uses manual system as seen in application letter files file so it needs long time to determine accepted and rejected the application. For that it needs to built a system or application that allows companies in determining employees who accepted or rejected easily. Pofile Matching Method is a process of competency assessment that is done by comparing the value of written, psychological and interview test between one applicationt with other. PT. Asuransi Bina Dana Arta, Tbk Pekanbaru branch set the percentage to calculate NCF (Core Factor Value) by 60% and NSF (Secondary Factor Value) by 40%, and set the percentage to calculate the total value of written test by 40%, the total value of psycho test by 30%, and the total value of interview 30%. The final result of this study is to determine the rank or ranking of each applicant based on the greater value which, the greater that score of final result of an application get, the greater the chance of the applicant occupy a position or vacancy. Online Recruitment application uses profile matching method can help employee selection process and employee acceptance decisions quickly. This system can be viewed by directors or owners anywhere because it is online and used for other company branch

[Case-non case studies: Principles, methods, bias and interpretation].

Science.gov (United States)

Faillie, Jean-Luc

2017-10-31

Case-non case studies belongs to the methods assessing drug safety by analyzing the disproportionality of notifications of adverse drug reactions in pharmacovigilance databases. Used for the first time in the 1980s, the last few decades have seen a significant increase in the use of this design. The principle of the case-non case study is to compare drug exposure in cases of a studied adverse reaction with that of cases of other reported adverse reactions and called "non cases". Results are presented in the form of a reporting odds ratio (ROR), the interpretation of which makes it possible to identify drug safety signals. This article describes the principle of the case-non case study, the method of calculating the ROR and its confidence interval, the different modalities of analysis and how to interpret its results with regard to the advantages and limitations of this design. Copyright © 2017 Société française de pharmacologie et de thérapeutique. Published by Elsevier Masson SAS. All rights reserved.

Application of thin layer activation method to industrial use

International Nuclear Information System (INIS)

Yamamoto, Masago; Hatakeyama, Noriko

1996-01-01

A thin layer activation method was reviewed for non-destructive, rapid, precise and real-time measurement of wear and corrosion. The review included wear measurement, the principle of the method, actual measurement, application, and laws and regulations. The method is to activate the material surface alone by accelerated ions like p, d and He ions produced by cyclotron, Van de Graaf apparatus or other accelerators and to utilize the yielded radioisotopes as a tracer, is widely used in the tribology field, and is more useful than the previous method with the reactor since it activated the whole material. Application of the method was reportedly resulted in saving the 80% cost and 90% time in the wear measurement of automobile parts such as engine and transmission. Actually, the activated material was combined into the part to be run and the radioactivity was to be measured externally or in the worn particles suitably collected. The activation thickness was generally in the range of 10-200 μm and the resultant radioactivity, 0.2-2 MBq. In most cases in Japan, the method would be under the law concerning prevention from radiation hazards due to radioisotopes, etc. (K.H.)

An econometric method for estimating population parameters from non-random samples: An application to clinical case finding.

Science.gov (United States)

Burger, Rulof P; McLaren, Zoë M

2017-09-01

The problem of sample selection complicates the process of drawing inference about populations. Selective sampling arises in many real world situations when agents such as doctors and customs officials search for targets with high values of a characteristic. We propose a new method for estimating population characteristics from these types of selected samples. We develop a model that captures key features of the agent's sampling decision. We use a generalized method of moments with instrumental variables and maximum likelihood to estimate the population prevalence of the characteristic of interest and the agents' accuracy in identifying targets. We apply this method to tuberculosis (TB), which is the leading infectious disease cause of death worldwide. We use a national database of TB test data from South Africa to examine testing for multidrug resistant TB (MDR-TB). Approximately one quarter of MDR-TB cases was undiagnosed between 2004 and 2010. The official estimate of 2.5% is therefore too low, and MDR-TB prevalence is as high as 3.5%. Signal-to-noise ratios are estimated to be between 0.5 and 1. Our approach is widely applicable because of the availability of routinely collected data and abundance of potential instruments. Using routinely collected data to monitor population prevalence can guide evidence-based policy making. Copyright © 2017 John Wiley & Sons, Ltd.

[Clinical evaluation of TANDEM PSA in Japanese cases and comparison with other methods].

Science.gov (United States)

Kuriyama, M; Yamamoto, N; Shinoda, I; Kawada, Y; Akimoto, S; Shimazaki, J

1995-01-01

Clinical evaluation of TANDEM PSA which is the most frequently used prostate specific antigen (PSA) assay method in the world and a comparison with other methods were performed in Japanese cases in a cooperative research fashion. The minimum detectable level of the method was found to be 0.50 ng of PSA in one ml of serum and 1.9 ng/ml was regarded as the upper normal value in Japanese males. The distribution of serum PSA showed a significant difference between the benign prostate hypertrophy (BPH) cases and patients with stage C or D prostate cancer. The sero-diagnosis prostate cancer at an early stage with the TANDEM PSA was difficult. The correlation to other methods of PSA detection was very high. Furthermore, the clinical use of the method in following-up the clinical course of prostate cancer patients was very useful. These findings suggested that the PSA detection using TANDEM PSA is applicable even in Japanese cases although the upper cut-off level is decreased.

Application of autoradiography methods for solving problems of microelectronics

International Nuclear Information System (INIS)

Frejer, K.; Trojtler, Kh.-Kh.; Birkgol'ts, V.

1979-01-01

Methods of contact autoradiography with halogen-silver emulsions and autoradiography, caused by the interaction of neutrons with solid track detectors, are successfully used for determination of lateral and longitudal distributions of matter in the basic semiconductor material as well as in the frameworks of its preparation. Possibilities for application and power parameters of some autoradiographic methods related to sensitivity of detection and local resolution are considered on the example of the basic material - silicon. In this case, special attention was paid on investigation of elements combibation, for example: boron/phosphorus as well as on the methods of correlation of solid track and halogen-silver autoradiogrammes [ru

Methods and Case Studies for Teaching and Learning about Failure and Safety.

Science.gov (United States)

Bignell, Victor

1999-01-01

Discusses methods for analyzing case studies of failures of technological systems. Describes two distance learning courses that compare standard models of failure and success with the actuality of given scenarios. Provides teaching and learning materials and information sources for application to aspects of design, manufacture, inspection, use,…

Method of using of the Box-Cox transformation at the application of the xbar and s chart

Directory of Open Access Journals (Sweden)

Eftimie Nicolae

2017-01-01

Full Text Available The application of the most statistical process control techniques is based on the assumption that the distribution of the measurements is normal. However, there are many situations in practice when the process data distribution is not normal. In certain cases, the Box-Cox transformation can be used for converting the process data distribution into a normal distribution. Considering these aspects, the paper presents a method of application for the xbar and s chart that can be used in the case when the measurements distribution is not normal. The proposed method consists of the following stages: the testing of normality of the process data, the application of the Box-Cox transformation and the testing of normality of the transformed data. In the case when the distribution of the transformed data is normal, they are used at the application of the xbar and s control chart.

Integrated Markov-neural reliability computation method: A case for multiple automated guided vehicle system

International Nuclear Information System (INIS)

Fazlollahtabar, Hamed; Saidi-Mehrabad, Mohammad; Balakrishnan, Jaydeep

2015-01-01

This paper proposes an integrated Markovian and back propagation neural network approaches to compute reliability of a system. While states of failure occurrences are significant elements for accurate reliability computation, Markovian based reliability assessment method is designed. Due to drawbacks shown by Markovian model for steady state reliability computations and neural network for initial training pattern, integration being called Markov-neural is developed and evaluated. To show efficiency of the proposed approach comparative analyses are performed. Also, for managerial implication purpose an application case for multiple automated guided vehicles (AGVs) in manufacturing networks is conducted. - Highlights: • Integrated Markovian and back propagation neural network approach to compute reliability. • Markovian based reliability assessment method. • Managerial implication is shown in an application case for multiple automated guided vehicles (AGVs) in manufacturing networks

Characterization of Developer Application Methods Used in Fluorescent Penetrant Inspection

Science.gov (United States)

Brasche, L. J. H.; Lopez, R.; Eisenmann, D.

2006-03-01

Fluorescent penetrant inspection (FPI) is the most widely used inspection method for aviation components seeing use for production as well as an inservice inspection applications. FPI is a multiple step process requiring attention to the process parameters for each step in order to enable a successful inspection. A multiyear program is underway to evaluate the most important factors affecting the performance of FPI, to determine whether existing industry specifications adequately address control of the process parameters, and to provide the needed engineering data to the public domain. The final step prior to the inspection is the application of developer with typical aviation inspections involving the use of dry powder (form d) usually applied using either a pressure wand or dust storm chamber. Results from several typical dust storm chambers and wand applications have shown less than optimal performance. Measurements of indication brightness and recording of the UVA image, and in some cases, formal probability of detection (POD) studies were used to assess the developer application methods. Key conclusions and initial recommendations are provided.

Case studies: Soil mapping using multiple methods

Science.gov (United States)

Petersen, Hauke; Wunderlich, Tina; Hagrey, Said A. Al; Rabbel, Wolfgang; Stümpel, Harald

2010-05-01

Soil is a non-renewable resource with fundamental functions like filtering (e.g. water), storing (e.g. carbon), transforming (e.g. nutrients) and buffering (e.g. contamination). Degradation of soils is meanwhile not only to scientists a well known fact, also decision makers in politics have accepted this as a serious problem for several environmental aspects. National and international authorities have already worked out preservation and restoration strategies for soil degradation, though it is still work of active research how to put these strategies into real practice. But common to all strategies the description of soil state and dynamics is required as a base step. This includes collecting information from soils with methods ranging from direct soil sampling to remote applications. In an intermediate scale mobile geophysical methods are applied with the advantage of fast working progress but disadvantage of site specific calibration and interpretation issues. In the framework of the iSOIL project we present here some case studies for soil mapping performed using multiple geophysical methods. We will present examples of combined field measurements with EMI-, GPR-, magnetic and gammaspectrometric techniques carried out with the mobile multi-sensor-system of Kiel University (GER). Depending on soil type and actual environmental conditions, different methods show a different quality of information. With application of diverse methods we want to figure out, which methods or combination of methods will give the most reliable information concerning soil state and properties. To investigate the influence of varying material we performed mapping campaigns on field sites with sandy, loamy and loessy soils. Classification of measured or derived attributes show not only the lateral variability but also gives hints to a variation in the vertical distribution of soil material. For all soils of course soil water content can be a critical factor concerning a succesful

Statistical disclosure control for microdata methods and applications in R

CERN Document Server

Templ, Matthias

2017-01-01

This book on statistical disclosure control presents the theory, applications and software implementation of the traditional approach to (micro)data anonymization, including data perturbation methods, disclosure risk, data utility, information loss and methods for simulating synthetic data. Introducing readers to the R packages sdcMicro and simPop, the book also features numerous examples and exercises with solutions, as well as case studies with real-world data, accompanied by the underlying R code to allow readers to reproduce all results. The demand for and volume of data from surveys, registers or other sources containing sensible information on persons or enterprises have increased significantly over the last several years. At the same time, privacy protection principles and regulations have imposed restrictions on the access and use of individual data. Proper and secure microdata dissemination calls for the application of statistical disclosure control methods to the data before release. This book is in...

The application of DCPD method to evaluating dynamic J-R fracture resistance characteristics

International Nuclear Information System (INIS)

Yoon, Ji Hyun; Hong, Jun Hwa; Lee, Bong Sang; Chi, Se Whan; Kim, Joo Hag; Oh, Yong Jun; Kwun, Sun Chil; Oh, Jong Myung

1999-06-01

The reliable DCPD (Direct Current Potential Drop) test and data acquisition system were developed on the basis of analysis of various technical problems to accompanied with the application of DCPD method to J-R fracture resistance test. The test system contains electric insulation rod and high performance data acquisition system. The test and analysis method was applied to J-R fracture resistance test for SA516-Gr.70 steel for nuclear primary coolant system elbow. The reliabilities of test and analysis method were confirmed through the load-ratio method in case of dynamic loading test, and through the standard unloading compliance test in case of static loading test. (author). 17 refs., 1 tab., 18 figs

The application of DCPD method to evaluating dynamic J-R fracture resistance characteristics

Energy Technology Data Exchange (ETDEWEB)

Yoon, Ji Hyun; Hong, Jun Hwa; Lee, Bong Sang; Chi, Se Whan; Kim, Joo Hag; Oh, Yong Jun; Kwun, Sun Chil; Oh, Jong Myung

1999-06-01

The reliable DCPD (Direct Current Potential Drop) test and data acquisition system were developed on the basis of analysis of various technical problems to accompanied with the application of DCPD method to J-R fracture resistance test. The test system contains electric insulation rod and high performance data acquisition system. The test and analysis method was applied to J-R fracture resistance test for SA516-Gr.70 steel for nuclear primary coolant system elbow. The reliabilities of test and analysis method were confirmed through the load-ratio method in case of dynamic loading test,and through the standard unloading compliance test in case of static loading test. (author). 17 refs., 1 tab., 18 figs.

Using existing case-mix methods to fund trauma cases.

Science.gov (United States)

Monakova, Julia; Blais, Irene; Botz, Charles; Chechulin, Yuriy; Picciano, Gino; Basinski, Antoni

2010-01-01

Policymakers frequently face the need to increase funding in isolated and frequently heterogeneous (clinically and in terms of resource consumption) patient subpopulations. This article presents a methodologic solution for testing the appropriateness of using existing grouping and weighting methodologies for funding subsets of patients in the scenario where a case-mix approach is preferable to a flat-rate based payment system. Using as an example the subpopulation of trauma cases of Ontario lead trauma hospitals, the statistical techniques of linear and nonlinear regression models, regression trees, and spline models were applied to examine the fit of the existing case-mix groups and reference weights for the trauma cases. The analyses demonstrated that for funding Ontario trauma cases, the existing case-mix systems can form the basis for rational and equitable hospital funding, decreasing the need to develop a different grouper for this subset of patients. This study confirmed that Injury Severity Score is a poor predictor of costs for trauma patients. Although our analysis used the Canadian case-mix classification system and cost weights, the demonstrated concept of using existing case-mix systems to develop funding rates for specific subsets of patient populations may be applicable internationally.

Out of the box selection and application of UX evaluation methods and practical cases

DEFF Research Database (Denmark)

Obrist, Marianna; Knoche, Hendrik; Basapur, Santosh

2013-01-01

The scope of user experience supersedes the concept of usability and other performance oriented measures by including for example users' emotions, motivations and a strong focus on the context of use. The purpose of this tutorial is to motivate researchers and practitioners to think about...... the challenging questions around how to select and apply UX evaluation methods for different usage contexts, in particular for the "home" and "mobile" context, relevant for TV-based services. Next to a general understanding of UX evaluation and available methods, we will provide concrete UX evaluation case...

Licensing in BE system code calculations. Applications and uncertainty evaluation by CIAU method

International Nuclear Information System (INIS)

Petruzzi, Alessandro; D'Auria, Francesco

2007-01-01

The evaluation of uncertainty constitutes the necessary supplement of Best Estimate (BE) calculations performed to understand accident scenarios in water cooled nuclear reactors. The needs come from the imperfection of computational tools on the one side and from the interest in using such tool to get more precise evaluation of safety margins. In the present paper the approaches to uncertainty are outlined and the CIAU (Code with capability of Internal Assessment of Uncertainty) method proposed by the University of Pisa is described including ideas at the basis and results from applications. Two approaches are distinguished that are characterized as 'propagation of code input uncertainty' and 'propagation of code output errors'. For both methods, the thermal-hydraulic code is at the centre of the process of uncertainty evaluation: in the former case the code itself is adopted to compute the error bands and to propagate the input errors, in the latter case the errors in code application to relevant measurements are used to derive the error bands. The CIAU method exploits the idea of the 'status approach' for identifying the thermal-hydraulic conditions of an accident in any Nuclear Power Plant (NPP). Errors in predicting such status are derived from the comparison between predicted and measured quantities and, in the stage of the application of the method, are used to compute the uncertainty. (author)

Exergy analysis of heating, refrigerating and air conditioning methods and applications

CERN Document Server

Dincer, Ibrahim

2015-01-01

Improve and optimize efficiency of HVAC and related energy systems from an exergy perspective. From fundamentals to advanced applications, Exergy Analysis of Heating, Air Conditioning, and Refrigeration provides readers with a clear and concise description of exergy analysis and its many uses. Focusing on the application of exergy methods to the primary technologies for heating, refrigerating, and air conditioning, Ibrahim Dincer and Marc A. Rosen demonstrate exactly how exergy can help improve and optimize efficiency, environmental performance, and cost-effectiveness. The book also discusses the analysis tools available, and includes many comprehensive case studies on current and emerging systems and technologies for real-world examples. From introducing exergy and thermodynamic fundamentals to presenting the use of exergy methods for heating, refrigeration, and air conditioning systems, this book equips any researcher or practicing engineer with the tools needed to learn and master the application of exergy...

The single-sink fixed-charge transportation problem: Applications and solution methods

DEFF Research Database (Denmark)

Goertz, Simon; Klose, Andreas

2007-01-01

The single-sink fixed-charge transportation problem (SSFCTP) consists in finding a minimum cost flow from a number of supplier nodes to a single demand node. Shipping costs comprise costs proportional to the amount shipped as well as a fixed-charge. Although the SSFCTP is an important special case...... of the well-known fixed-charge transportation problem, just a few methods for solving this problem have been proposed in the literature. After summarising some applications of this problem arising in manufacturing and transportation, we give an overview on approximation algorithms and worst-case results...

The electrical resistivity method in cased boreholes

Energy Technology Data Exchange (ETDEWEB)

Schenkel, C.J.

1991-05-01

The use of downhole current sources in resistivity mapping can greatly enhance the detection and delineation of subsurface features. The purpose of this work is to examine the resistivity method for current sources in wells cased with steel. The resistivity method in cased boreholes with downhole current sources is investigated using the integral equation (IE) technique. The casing and other bodies are characterized as conductivity inhomogeneities in a half-space. For sources located along the casing axis, an axially symmetric Green's function is used to formulate the surface potential and electric field (E-field) volume integral equations. The situations involving off-axis current sources and three-dimensional (3-D) bodies is formulated using the surface potential IE method. The solution of the 3-D Green's function is presented in cylindrical and Cartesian coordinate systems. The methods of moments is used to solve the Fredholm integral equation of the second kind for the response due to the casing and other bodies. The numerical analysis revealed that the current in the casing can be approximated by its vertical component except near the source and the axial symmetric approximation of the casing is valid even for the 3-D problem. The E-field volume IE method is an effective and efficient technique to simulate the response of the casing in a half-space, whereas the surface potential approach is computationally better when multiple bodies are involved. Analyzing several configurations of the current source indicated that the casing response is influenced by four characteristic factors: conduction length, current source depth,casing depth, and casing length. 85 refs., 133 figs., 11 tabs.

Methods of Celestial Mechanics Volume II: Application to Planetary System, Geodynamics and Satellite Geodesy

CERN Document Server

Beutler, Gerhard

2005-01-01

G. Beutler's Methods of Celestial Mechanics is a coherent textbook for students as well as an excellent reference for practitioners. Volume II is devoted to the applications and to the presentation of the program system CelestialMechanics. Three major areas of applications are covered: (1) Orbital and rotational motion of extended celestial bodies. The properties of the Earth-Moon system are developed from the simplest case (rigid bodies) to more general cases, including the rotation of an elastic Earth, the rotation of an Earth partly covered by oceans and surrounded by an atmosphere, and the rotation of an Earth composed of a liquid core and a rigid shell (Poincaré model). (2) Artificial Earth Satellites. The oblateness perturbation acting on a satellite and the exploitation of its properties in practice is discussed using simulation methods (CelestialMechanics) and (simplified) first order perturbation methods. The perturbations due to the higher-order terms of the Earth's gravitational potential and reso...

A case method for Sales and Operations Planning: a learning experience from Germany

Directory of Open Access Journals (Sweden)

Luiz Felipe Scavarda

Full Text Available Abstract Adequate preparation, learning, and training is required for Sales and Operations Planning (S&OP to aid organizations in achieving the full expected benefits from its implementation. This paper presents a case method for S&OP and the learning experience of its application at the University of Münster (Germany. The “constructive alignment principle” was applied with a “team teaching” approach, involving an executive from the case company. Students improved their knowledge on S&OP and their analytical skills by understanding the conceptual S&OP building blocks and by learning how to deal with them to provide a solution for a case based on a real-life situation. The learning results were evaluated positively during the discipline’s student evaluation of teaching (SET. The applied case method enhanced the student’s motivation and engagement (e.g., higher preparation effort and class attendance, which were considered higher than in other disciplines with the traditional lecture-based education.

The Use of MIVES as a Sustainability Assessment MCDM Method for Architecture and Civil Engineering Applications

Directory of Open Access Journals (Sweden)

Oriol Pons

2016-05-01

Full Text Available Environmental and sustainability assessment tools have an important role in moving towards a better world, bringing knowledge and raising awareness. In the architecture and civil engineering sector, these assessment tools help in moving forward to constructions that have less economic, environmental and social impacts. At present, there are numerous assessment tools and methods with different approaches and scopes that have been analyzed in numerous technical reviews. However, there is no agreement about which method should be used for each evaluation case. This research paper synthetically analyzes the main sustainability assessment methods for the construction sector, comparing their strengths and weaknesses in order to present the challenges of the Spanish Integrated Value Model for Sustainability Assessment (MIVES. MIVES is a Multi-Criteria Decision Making method based on the value function concept and the Seminars of experts. Then, this article analyzes MIVES advantages and weak points by going through its methodology and two representative applications. At the end, the area of application of MIVES is described in detail along with the general application cases of the main types of assessment tools and methods.

[Otomycosis and topical application of thimerosal: study of 152 cases].

Science.gov (United States)

Tisner, J; Millán, J; Rivas, P; Adiego, I; Castellote, A; Valles, H

1995-01-01

To evaluate the effectiveness of the topical application of Timerosal (merthilate tintura) in mycosis involving the external auditory canal. The study includes 152 patients with the clinical, otoscopic and microscopic diagnosis of otomycosis. Results were assessed 72 hours and 10 days after the application. Bacteriological study was performed in 83 patients, finding Aspergilly niger in 54.0% of the cases, Candida albicans in 25.4%, Aspergillus fumigatus in 15.8% and Penicillium in 4.8%. Improvement at 72 h. was found in 66.4% and at 10 days in 93.4% of the patients. Bacteriological contamination was found in 6.6% of the total. In most of the patients, the otomycosis healed after cleaning of the external auditory canal and topical application of timerosal. This method is easy to apply, fast, effective, of low cost and few side effects.

Recursive least squares method of regression coefficients estimation as a special case of Kalman filter

Science.gov (United States)

Borodachev, S. M.

2016-06-01

The simple derivation of recursive least squares (RLS) method equations is given as special case of Kalman filter estimation of a constant system state under changing observation conditions. A numerical example illustrates application of RLS to multicollinearity problem.

Rationalization of thermal injury quantification methods: application to skin burns.

Science.gov (United States)

Viglianti, Benjamin L; Dewhirst, Mark W; Abraham, John P; Gorman, John M; Sparrow, Eph M

2014-08-01

Classification of thermal injury is typically accomplished either through the use of an equivalent dosimetry method (equivalent minutes at 43 °C, CEM43 °C) or through a thermal-injury-damage metric (the Arrhenius method). For lower-temperature levels, the equivalent dosimetry approach is typically employed while higher-temperature applications are most often categorized by injury-damage calculations. The two methods derive from common thermodynamic/physical chemistry origins. To facilitate the development of the interrelationships between the two metrics, application is made to the case of skin burns. This thermal insult has been quantified by numerical simulation, and the extracted time-temperature results served for the evaluation of the respective characterizations. The simulations were performed for skin-surface exposure temperatures ranging from 60 to 90 °C, where each surface temperature was held constant for durations extending from 10 to 110 s. It was demonstrated that values of CEM43 at the basal layer of the skin were highly correlated with the depth of injury calculated from a thermal injury integral. Local values of CEM43 were connected to the local cell survival rate, and a correlating equation was developed relating CEM43 with the decrease in cell survival from 90% to 10%. Finally, it was shown that the cell survival/CEM43 relationship for the cases investigated here most closely aligns with isothermal exposure of tissue to temperatures of ~50 °C. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Comparative study among calibration methods of clinical applicators of beta radiation

International Nuclear Information System (INIS)

Antonio, Patricia de Lara

2009-01-01

90 Sr+ 90 Y clinical applicators are instruments used in brachytherapy procedures and they have to be periodically calibrated, according to international standards and recommendations. In this work, four calibration methods of dermatological and ophthalmic applicators were studied, comparing the results with those given by the calibration certificates of the manufacturers. The methods included the use of the standard applicator of the Calibration Laboratory (LCI), calibrated by the National Institute of Standards and Technology; an Amersham applicator (LCI) as reference; a mini-extrapolation chamber developed at LCI as an absolute standard; and thermoluminescent dosimetry. The mini-extrapolation chamber and a PTW commercial extrapolation chamber were studied in relation to their performance through quality control tests of their response, as leakage current, repeatability and reproducibility. The distribution of the depth dose in water, that presents high importance in dosimetry of clinical applicators, was determined using the mini extrapolation chamber and the thermoluminescent dosimeters. The results obtained were considered satisfactory for the both cases, and comparable to the data of the IAEA (2002) standard. Furthermore, a dosimetry postal kit was developed for the calibration of clinical applicators using the thermoluminescent technique, to be sent to clinics and hospitals, without the need of the transport of the sources to IPEN for calibration. (author)

Treatment of uncertainty through the interval smart/swing weighting method: a case study

Directory of Open Access Journals (Sweden)

Luiz Flávio Autran Monteiro Gomes

2011-12-01

Full Text Available An increasingly competitive market means that many decisions must be taken, quickly and with precision, in complex, high risk scenarios. This combination of factors makes it necessary to use decision aiding methods which provide a means of dealing with uncertainty in the judgement of the alternatives. This work presents the use of the MAUT method, combined with the INTERVAL SMART/SWING WEIGHTING method. Although multicriteria decision aiding was not conceived specifically for tackling uncertainty, the combined use of MAUT and the INTERVAL SMART/SWING WEIGHTING method allows approaching decision problems under uncertainty. The main concepts which are involved in these two methods are described and their joint application to the case study concerning the selection of a printing service supplier is presented. The case study makes use of the WINPRE software as a support tool for the calculation of dominance. It is then concluded that the proposed approach can be applied to decision making problems under uncertainty.

Application of radiotracer methods in streamflow measurements

International Nuclear Information System (INIS)

Dincer, T.

1967-01-01

An attempt is made to evaluate methods using radiotracers in streamflow measurements. The basic principles of the tracer method are explained and background information given. Radiotracers used in stream discharge measurements are discussed and measurements made by different research workers are described. Problems such as adsorption of the tracer and the mixing length are discussed and the potential use of the radioisotopes as tracer in the routine stream-gauging work is evaluated. It is concluded that, at the present stage of development, radiotracer methods do not seem to be ready for routine use in stream-gauging work, and can only be used in some special cases. For gamma-emitting radioisotopes there are problems related to safety, transport and injection which should be solved. Tritium, though a very attractive tracer in some respects, has the disadvantages of having a relatively long half-life and of disturbing the natural tritium levels in the region. Finally, an attempt is made to define the objectives of the research in the field of application of radioisotopes in hydrometry. (author)

An Intuitionistic Fuzzy Stochastic Decision-Making Method Based on Case-Based Reasoning and Prospect Theory

Directory of Open Access Journals (Sweden)

Peng Li

2017-01-01

Full Text Available According to the case-based reasoning method and prospect theory, this paper mainly focuses on finding a way to obtain decision-makers’ preferences and the criterion weights for stochastic multicriteria decision-making problems and classify alternatives. Firstly, we construct a new score function for an intuitionistic fuzzy number (IFN considering the decision-making environment. Then, we aggregate the decision-making information in different natural states according to the prospect theory and test decision-making matrices. A mathematical programming model based on a case-based reasoning method is presented to obtain the criterion weights. Moreover, in the original decision-making problem, we integrate all the intuitionistic fuzzy decision-making matrices into an expectation matrix using the expected utility theory and classify or rank the alternatives by the case-based reasoning method. Finally, two illustrative examples are provided to illustrate the implementation process and applicability of the developed method.

Application of electrical geophysics to the release of water resources, case of Ain Leuh (Morocco)

Science.gov (United States)

Zitouni, A.; Boukdir, A.; El Fjiji, H.; Baite, W.; Ekouele Mbaki, V. R.; Ben Said, H.; Echakraoui, Z.; Elissami, A.; El Maslouhi, M. R.

2018-05-01

Being seen needs in increasing waters in our contry for fine domestics, manufactures and agricultural, the prospecting of subterranean waters by geologic and hydrogeologic classic method remains inaplicable in the cases of the regions where one does not arrange drillings or polls (soundings) of gratitude (recongnition) in very sufficient (self-important) number. In that case of figure, the method of prospecting geophysics such as the method of nuclear magnetic resonance (NMR) and the method of the geophysics radar are usually used most usually because they showed, worldwide, results very desive in the projects of prospecting and evaluation of the resources in subterranean waters. In the present work, which concerns only the methodology of the electric resistivity, we treat the adopted methodological approach and the study of the case of application in the tray of Ajdir Ain Leuh.

Viscosity measurements - a comprehensive overview on the method and its applicability for the identification of irradiated foodstuffs

International Nuclear Information System (INIS)

Nuernberger, E.; Heide, L.; Boegl, K.W.

1991-01-01

The viscosity of a foodstuff depends mainly on the composition and the amount of starch, pectins and cellulose, which may undergo changes after irradiation. The investigation on the applicability of viscosity measurement for the identification of irradiated foods showed so far that this method seems to be applicable only to a definite number of spices and foods. The optimal method has to be determined empirically, because the reason is still unknown, why in some cases, the viscosity values decrease and in other cases increase after irradiation - and why sometimes no changes occur at all. Until now, the following irradiated spices can be identified by this method: cardamom, cinnamon, curcuma, horse-radish, nutmeg, mustard-seed and white pepper. (21 figs, 2 tabs, 10 refs)

Comparison of optical design methods of freeform surfaces for imaging applications

Science.gov (United States)

Agócs, Tibor

2015-09-01

Optical systems based on freeform optical components offer many advantages over conventional systems in imaging applications, e.g. superior image quality, compact and lightweight designs. There are a few well established manufacturing method that can be used for the generation of freeform surfaces with low surface form error and low surface roughness, in the case of freeform mirrors e.g. diamond turning, nickel plating and post-polishing. Metrology is evolving rapidly, although developments are still needed in order to verify the manufactured surface with the necessary accuracy. Optical design methods of freeform surfaces are also lagging behind, many algorithms address non-imaging applications, but in the field of imaging (image-forming) only a few exists and works with various limitations. We compare the available techniques in freeform optical design for imaging and explore the advantages, disadvantages and boundary conditions of the different methods. We also intend to identify the most useful concepts and investigate how they can be embedded into commercially available optical design software.

Simulation of sound waves using the Lattice Boltzmann Method for fluid flow: Benchmark cases for outdoor sound propagation

NARCIS (Netherlands)

Salomons, E.M.; Lohman, W.J.A.; Zhou, H.

2016-01-01

Propagation of sound waves in air can be considered as a special case of fluid dynamics. Consequently, the lattice Boltzmann method (LBM) for fluid flow can be used for simulating sound propagation. In this article application of the LBM to sound propagation is illustrated for various cases:

APPLICATION OF THE PERFORMANCE SELECTION INDEX METHOD FOR SOLVING MACHINING MCDM PROBLEMS

Directory of Open Access Journals (Sweden)

Dušan Petković

2017-04-01

Full Text Available Complex nature of machining processes requires the use of different methods and techniques for process optimization. Over the past few years a number of different optimization methods have been proposed for solving continuous machining optimization problems. In manufacturing environment, engineers are also facing a number of discrete machining optimization problems. In order to help decision makers in solving this type of optimization problems a number of multi criteria decision making (MCDM methods have been proposed. This paper introduces the use of an almost unexplored MCDM method, i.e. performance selection index (PSI method for solving machining MCDM problems. The main motivation for using the PSI method is that it is not necessary to determine criteria weights as in other MCDM methods. Applicability and effectiveness of the PSI method have been demonstrated while solving two case studies dealing with machinability of materials and selection of the most suitable cutting fluid for the given machining application. The obtained rankings have good correlation with those derived by the past researchers using other MCDM methods which validate the usefulness of this method for solving machining MCDM problems.

Applying Case-Based Method in Designing Self-Directed Online Instruction: A Formative Research Study

Science.gov (United States)

Luo, Heng; Koszalka, Tiffany A.; Arnone, Marilyn P.; Choi, Ikseon

2018-01-01

This study investigated the case-based method (CBM) instructional-design theory and its application in designing self-directed online instruction. The purpose of this study was to validate and refine the theory for a self-directed online instruction context. Guided by formative research methodology, this study first developed an online tutorial…

The application of geophysical methods to archaeological prospection

Energy Technology Data Exchange (ETDEWEB)

Linford, Neil [Geophysics Team, English Heritage, Fort Cumberland, Eastney, Portsmouth PO4 9LD (United Kingdom)

2006-07-15

The aim of this review is to combine the almost universal fascination we share for our past with the comparatively recent, in archaeological terms, application of geophysical prospection methods. For their success, each of these methods relies upon a physical contrast to exist between the buried archaeological feature and the properties of the surrounding subsoil. Understanding the archaeological origin of such physical contrasts, in terms of density, thermal conductivity, electrical resistance, magnetic or dielectric properties, remains fundamental to an appreciation of the discipline. This review provides a broad introduction to the subject area acknowledging the historical development of the discipline and discusses each of the major techniques in turn: earth resistance, magnetic and electromagnetic methods (including ground penetrating radar), together with an appreciation of more esoteric approaches, such as the use of micro-gravity survey to detect buried chambers and voids. The physical principles and field instrumentation involved for the acquisition of data with each method are considered and fully illustrated with case histories of results from the English Heritage archives.

The application of geophysical methods to archaeological prospection

International Nuclear Information System (INIS)

Linford, Neil

2006-01-01

The aim of this review is to combine the almost universal fascination we share for our past with the comparatively recent, in archaeological terms, application of geophysical prospection methods. For their success, each of these methods relies upon a physical contrast to exist between the buried archaeological feature and the properties of the surrounding subsoil. Understanding the archaeological origin of such physical contrasts, in terms of density, thermal conductivity, electrical resistance, magnetic or dielectric properties, remains fundamental to an appreciation of the discipline. This review provides a broad introduction to the subject area acknowledging the historical development of the discipline and discusses each of the major techniques in turn: earth resistance, magnetic and electromagnetic methods (including ground penetrating radar), together with an appreciation of more esoteric approaches, such as the use of micro-gravity survey to detect buried chambers and voids. The physical principles and field instrumentation involved for the acquisition of data with each method are considered and fully illustrated with case histories of results from the English Heritage archives

Applications of ATILA FEM software to smart materials case studies in designing devices

CERN Document Server

Uchino, Kenji

2013-01-01

ATILA Finite Element Method (FEM) software facilitates the modelling and analysis of applications using piezoelectric, magnetostrictor and shape memory materials. It allows entire designs to be constructed, refined and optimized before production begins. Through a range of instructive case studies, Applications of ATILA FEM software to smart materials provides an indispensable guide to the use of this software in the design of effective products.Part one provides an introduction to ATILA FEM software, beginning with an overview of the software code. New capabilities and loss integratio

Single-Case Designs and Qualitative Methods: Applying a Mixed Methods Research Perspective

Science.gov (United States)

Hitchcock, John H.; Nastasi, Bonnie K.; Summerville, Meredith

2010-01-01

The purpose of this conceptual paper is to describe a design that mixes single-case (sometimes referred to as single-subject) and qualitative methods, hereafter referred to as a single-case mixed methods design (SCD-MM). Minimal attention has been given to the topic of applying qualitative methods to SCD work in the literature. These two…

Application of odex drilling method in a variably fractured volcanic/igneous environment

International Nuclear Information System (INIS)

Murphy, J.

1992-01-01

A case history of a subsurface investigation at a geothermal waste disposal facility within a volcanic flow regime illustrates a classic example of critical drilling problems arising from severe air and mud circulation loss. Extremely dense dacite and rhyolite rock alternating with severely fractured flow margins (interconnected with numerous voids and caverns) has provided the scenario for open-quotes gravel pilesclose quotes of substantial size between competent dacite flows. The interconnected void space at numerous depths beneath the site is great enough to create complete loss of circulation while using more than 3000 cubic feet per minute (cfm) of air at 350 pounds per square inch (psi). This initial failed effort also included the use of a foam additive. The technologies employed at this site to address the problem of circulation loss included air rotary casing hammer methods, mud rotary (with beat pulp additives and linen additives), boring wall stabilization, telescoped casing and ultimately the ODEX casing advancement system. The relative success of this seldom used method invites a discussion of the principals of the under-reamer drilling method (ODEX) and the physical limitations of the system. A practical knowledge of the advantages and disadvantages of each drilling method is necessary when designing an investigation addressing problems of soil and water contamination. Additionally, by addressing the methods that were unsuccessful, geologists, contractors and engineers can gain insight into the value and application of the various technologies available for similar drilling problems

Application of WSP method in analysis of environmental samples

International Nuclear Information System (INIS)

Stacho, M.; Slugen, V.; Hinca, R.; Sojak, S.; Krnac, S.

2014-01-01

Detection of activity in natural samples is specific especially because of its low level and high background interferences. Reduction of background interferences could be reached using low background chamber. Measurement geometry in shape of Marinelli beaker is commonly used according to low level of activity in natural samples. The Peak Net Area (PNA) method is the world-wide accepted technique for analysis of gamma-ray spectra. It is based on the net area calculation of the full energy peak, therefore, it takes into account only a fraction of measured gamma-ray spectrum. On the other hand, the Whole Spectrum Processing (WSP) approach to the gamma analysis makes possible to use entire information being in the spectrum. This significantly raises efficiency and improves energy resolution of the analysis. A principal step for the WSP application is building up the suitable response operator. Problems are put in an appearance when suitable standard calibration sources are unavailable. It may be occurred in the case of large volume samples and/or in the analysis of high energy range. Combined experimental and mathematical calibration may be a suitable solution. Many different detectors have been used to register the gamma ray and its energy. HPGe detectors produce the highest resolution commonly available today. Therefore they are they the most often used detectors in natural samples activity analysis. Scintillation detectors analysed using PNA method could be also used in simple cases, but for complicated spectra are practically inapplicable. WSP approach improves resolution of scintillation detectors and expands their applicability. WSP method allowed significant improvement of the energetic resolution and separation of "1"3"7Cs 661 keV peak from "2"1"4Bi 609 keV peak. At the other hand the statistical fluctuations in the lower part of the spectrum highlighted by background subtraction causes that this part is still not reliably analyzable. (authors)

The art and science of flow control - case studies using flow visualization methods

Science.gov (United States)

Alvi, F. S.; Cattafesta, L. N., III

2010-04-01

Active flow control (AFC) has been the focus of significant research in the last decade. This is mainly due to the potentially substantial benefits it affords. AFC applications range from the subsonic to the supersonic (and beyond) regime for both internal and external flows. These applications are wide and varied, such as controlling flow transition and separation over various external components of the aircraft to active management of separation and flow distortion in engine components and over turbine and compressor blades. High-speed AFC applications include control of flow oscillations in cavity flows, supersonic jet screech, impinging jets, and jet-noise control. In this paper we review some of our recent applications of AFC through a number of case studies that illustrate the typical benefits as well as limitations of present AFC methods. The case studies include subsonic and supersonic canonical flowfields such as separation control over airfoils, control of supersonic cavity flows and impinging jets. In addition, properties of zero-net mass-flux (ZNMF) actuators are also discussed as they represent one of the most widely studied actuators used for AFC. In keeping with the theme of this special issue, the flowfield properties and their response to actuation are examined through the use of various qualitative and quantitative flow visualization methods, such as smoke, shadowgraph, schlieren, planar-laser scattering, and Particle image velocimetry (PIV). The results presented here clearly illustrate the merits of using flow visualization to gain significant insight into the flow and its response to AFC.

A Generalized Least Squares Regression Approach for Computing Effect Sizes in Single-Case Research: Application Examples

Science.gov (United States)

Maggin, Daniel M.; Swaminathan, Hariharan; Rogers, Helen J.; O'Keeffe, Breda V.; Sugai, George; Horner, Robert H.

2011-01-01

A new method for deriving effect sizes from single-case designs is proposed. The strategy is applicable to small-sample time-series data with autoregressive errors. The method uses Generalized Least Squares (GLS) to model the autocorrelation of the data and estimate regression parameters to produce an effect size that represents the magnitude of…

Tasks tolerating application of analogue methods for determining acoustic emission source co-ordinates

International Nuclear Information System (INIS)

Artyukhov, V.I.; Vakar, K.B.; Makarov, V.I.; Ovchinnikov, N.I.; Perevezentsev, V.N.; Rzhevkin, V.R.; Shemyakin, V.V.; Yakovlev, G.V.

1980-01-01

Described are cases of coordinate detection of the acoustic emission (AE) sources during AE-testing of power reactors using analog systems. Five testing variants of design linear elements are considered and fields of their practical application to welded joint testing are pointed out. Described is the method of coordinate detection based on ''multibeam'' effect

Reliability design of a critical facility: An application of PRA methods

International Nuclear Information System (INIS)

Souza Vieira Neto, A.; Souza Borges, W. de

1987-01-01

Although a general agreement concerning the enforcement of reliability (probabilistic) design criteria for nuclear utilities is yet to be achieved. PRA methodology can still be used successfully as a project design and review tool, aimed at improving system's prospective performance or minimizing expected accident consequences. In this paper, the potential of such an application of PRA methods is examined in the special case of a critical design project currently being developed in Brazil. (orig.)

Risk assessment theory, methods, and applications

CERN Document Server

Rausand, Marvin

2011-01-01

With its balanced coverage of theory and applications along with standards and regulations, Risk Assessment: Theory, Methods, and Applications serves as a comprehensive introduction to the topic. The book serves as a practical guide to current risk analysis and risk assessment, emphasizing the possibility of sudden, major accidents across various areas of practice from machinery and manufacturing processes to nuclear power plants and transportation systems. The author applies a uniform framework to the discussion of each method, setting forth clear objectives and descriptions, while also shedding light on applications, essential resources, and advantages and disadvantages. Following an introduction that provides an overview of risk assessment, the book is organized into two sections that outline key theory, methods, and applications. * Introduction to Risk Assessment defines key concepts and details the steps of a thorough risk assessment along with the necessary quantitative risk measures. Chapters outline...

Classical Methods of Statistics With Applications in Fusion-Oriented Plasma Physics

CERN Document Server

Kardaun, Otto J W F

2005-01-01

Classical Methods of Statistics is a blend of theory and practical statistical methods written for graduate students and researchers interested in applications to plasma physics and its experimental aspects. It can also fruitfully be used by students majoring in probability theory and statistics. In the first part, the mathematical framework and some of the history of the subject are described. Many exercises help readers to understand the underlying concepts. In the second part, two case studies are presented exemplifying discriminant analysis and multivariate profile analysis. The introductions of these case studies outline contextual magnetic plasma fusion research. In the third part, an overview of statistical software is given and, in particular, SAS and S-PLUS are discussed. In the last chapter, several datasets with guided exercises, predominantly from the ASDEX Upgrade tokamak, are included and their physical background is concisely described. The book concludes with a list of essential keyword transl...

Statistical analysis with measurement error or misclassification strategy, method and application

CERN Document Server

Yi, Grace Y

2017-01-01

This monograph on measurement error and misclassification covers a broad range of problems and emphasizes unique features in modeling and analyzing problems arising from medical research and epidemiological studies. Many measurement error and misclassification problems have been addressed in various fields over the years as well as with a wide spectrum of data, including event history data (such as survival data and recurrent event data), correlated data (such as longitudinal data and clustered data), multi-state event data, and data arising from case-control studies. Statistical Analysis with Measurement Error or Misclassification: Strategy, Method and Application brings together assorted methods in a single text and provides an update of recent developments for a variety of settings. Measurement error effects and strategies of handling mismeasurement for different models are closely examined in combination with applications to specific problems. Readers with diverse backgrounds and objectives can utilize th...

Status of photonuclear method of analysis among other nuclear analytical methods and main fields of its application

International Nuclear Information System (INIS)

Burmistenko, Yu.N.

1986-01-01

Technical, organizational and economical aspects as applied to the field of application of photonuclear methods of analysis of substance composition are considered. As for the technical aspect, the most important factors are nuclear-physical characteristics of the elements under determination and the elements composing the sample matrix. As for the organizational aspect, the governing factor in a number of cases is the availability of an irradiation device in the close vicinity of the analytical laboratory. Studying the technical and organizational aspects while choosing the proper method one can obtain the main source data to perform feasibility studies of a nuclear analytical complex with this or that activation source. Therefore, the economical aspect is governing for the choice of the method

Human reliability analysis of errors of commission: a review of methods and applications

Energy Technology Data Exchange (ETDEWEB)

Reer, B

2007-06-15

Illustrated by specific examples relevant to contemporary probabilistic safety assessment (PSA), this report presents a review of human reliability analysis (HRA) addressing post initiator errors of commission (EOCs), i.e. inappropriate actions under abnormal operating conditions. The review addressed both methods and applications. Emerging HRA methods providing advanced features and explicit guidance suitable for PSA are: A Technique for Human Event Analysis (ATHEANA, key publications in 1998/2000), Methode d'Evaluation de la Realisation des Missions Operateur pour la Surete (MERMOS, 1998/2000), the EOC HRA method developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS, 2003), the Misdiagnosis Tree Analysis (MDTA) method (2005/2006), the Cognitive Reliability and Error Analysis Method (CREAM, 1998), and the Commission Errors Search and Assessment (CESA) method (2002/2004). As a result of a thorough investigation of various PSA/HRA applications, this paper furthermore presents an overview of EOCs (termination of safety injection, shutdown of secondary cooling, etc.) referred to in predictive studies and a qualitative review of cases of EOC quantification. The main conclusions of the review of both the methods and the EOC HRA cases are: (1) The CESA search scheme, which proceeds from possible operator actions to the affected systems to scenarios, may be preferable because this scheme provides a formalized way for identifying relatively important scenarios with EOC opportunities; (2) an EOC identification guidance like CESA, which is strongly based on the procedural guidance and important measures of systems or components affected by inappropriate actions, however should pay some attention to EOCs associated with familiar but non-procedural actions and EOCs leading to failures of manually initiated safety functions. (3) Orientations of advanced EOC quantification comprise a) modeling of multiple contexts for a given scenario, b) accounting for

Human reliability analysis of errors of commission: a review of methods and applications

International Nuclear Information System (INIS)

Reer, B.

2007-06-01

Illustrated by specific examples relevant to contemporary probabilistic safety assessment (PSA), this report presents a review of human reliability analysis (HRA) addressing post initiator errors of commission (EOCs), i.e. inappropriate actions under abnormal operating conditions. The review addressed both methods and applications. Emerging HRA methods providing advanced features and explicit guidance suitable for PSA are: A Technique for Human Event Analysis (ATHEANA, key publications in 1998/2000), Methode d'Evaluation de la Realisation des Missions Operateur pour la Surete (MERMOS, 1998/2000), the EOC HRA method developed by the Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS, 2003), the Misdiagnosis Tree Analysis (MDTA) method (2005/2006), the Cognitive Reliability and Error Analysis Method (CREAM, 1998), and the Commission Errors Search and Assessment (CESA) method (2002/2004). As a result of a thorough investigation of various PSA/HRA applications, this paper furthermore presents an overview of EOCs (termination of safety injection, shutdown of secondary cooling, etc.) referred to in predictive studies and a qualitative review of cases of EOC quantification. The main conclusions of the review of both the methods and the EOC HRA cases are: (1) The CESA search scheme, which proceeds from possible operator actions to the affected systems to scenarios, may be preferable because this scheme provides a formalized way for identifying relatively important scenarios with EOC opportunities; (2) an EOC identification guidance like CESA, which is strongly based on the procedural guidance and important measures of systems or components affected by inappropriate actions, however should pay some attention to EOCs associated with familiar but non-procedural actions and EOCs leading to failures of manually initiated safety functions. (3) Orientations of advanced EOC quantification comprise a) modeling of multiple contexts for a given scenario, b) accounting for

Industrial applications of formal methods to model, design and analyze computer systems

CERN Document Server

Craigen, Dan

1995-01-01

Formal methods are mathematically-based techniques, often supported by reasoning tools, that can offer a rigorous and effective way to model, design and analyze computer systems. The purpose of this study is to evaluate international industrial experience in using formal methods. The cases selected are representative of industrial-grade projects and span a variety of application domains. The study had three main objectives: · To better inform deliberations within industry and government on standards and regulations; · To provide an authoritative record on the practical experience of formal m

Comparison between different uncertainty propagation methods in multivariate analysis: An application in the bivariate case

International Nuclear Information System (INIS)

Mullor, R.; Sanchez, A.; Martorell, S.; Martinez-Alzamora, N.

2011-01-01

Safety related systems performance optimization is classically based on quantifying the effects that testing and maintenance activities have on reliability and cost (R+C). However, R+C quantification is often incomplete in the sense that important uncertainties may not be considered. An important number of studies have been published in the last decade in the field of R+C based optimization considering uncertainties. They have demonstrated that inclusion of uncertainties in the optimization brings the decision maker insights concerning how uncertain the R+C results are and how this uncertainty does matter as it can result in differences in the outcome of the decision making process. Several methods of uncertainty propagation based on the theory of tolerance regions have been proposed in the literature depending on the particular characteristics of the variables in the output and their relations. In this context, the objective of this paper focuses on the application of non-parametric and parametric methods to analyze uncertainty propagation, which will be implemented on a multi-objective optimization problem where reliability and cost act as decision criteria and maintenance intervals act as decision variables. Finally, a comparison of results of these applications and the conclusions obtained are presented.

Comparison between different uncertainty propagation methods in multivariate analysis: An application in the bivariate case

Energy Technology Data Exchange (ETDEWEB)

Mullor, R. [Dpto. Estadistica e Investigacion Operativa, Universidad Alicante (Spain); Sanchez, A., E-mail: aisanche@eio.upv.e [Dpto. Estadistica e Investigacion Operativa Aplicadas y Calidad, Universidad Politecnica Valencia, Camino de Vera s/n 46022 (Spain); Martorell, S. [Dpto. Ingenieria Quimica y Nuclear, Universidad Politecnica Valencia (Spain); Martinez-Alzamora, N. [Dpto. Estadistica e Investigacion Operativa Aplicadas y Calidad, Universidad Politecnica Valencia, Camino de Vera s/n 46022 (Spain)

2011-06-15

Safety related systems performance optimization is classically based on quantifying the effects that testing and maintenance activities have on reliability and cost (R+C). However, R+C quantification is often incomplete in the sense that important uncertainties may not be considered. An important number of studies have been published in the last decade in the field of R+C based optimization considering uncertainties. They have demonstrated that inclusion of uncertainties in the optimization brings the decision maker insights concerning how uncertain the R+C results are and how this uncertainty does matter as it can result in differences in the outcome of the decision making process. Several methods of uncertainty propagation based on the theory of tolerance regions have been proposed in the literature depending on the particular characteristics of the variables in the output and their relations. In this context, the objective of this paper focuses on the application of non-parametric and parametric methods to analyze uncertainty propagation, which will be implemented on a multi-objective optimization problem where reliability and cost act as decision criteria and maintenance intervals act as decision variables. Finally, a comparison of results of these applications and the conclusions obtained are presented.

Asymptotic Expansions - Methods and Applications

International Nuclear Information System (INIS)

Harlander, R.

1999-01-01

Different viewpoints on the asymptotic expansion of Feynman diagrams are reviewed. The relations between the field theoretic and diagrammatic approaches are sketched. The focus is on problems with large masses or large external momenta. Several recent applications also for other limiting cases are touched upon. Finally, the pros and cons of the different approaches are briefly discussed. (author)

The Application of Use Case Modeling in Designing Medical Imaging Information Systems

International Nuclear Information System (INIS)

Safdari, Reza; Farzi, Jebraeil; Ghazisaeidi, Marjan; Mirzaee, Mahboobeh; Goodini, Azadeh

2013-01-01

Introduction. The essay at hand is aimed at examining the application of use case modeling in analyzing and designing information systems to support Medical Imaging services. Methods. The application of use case modeling in analyzing and designing health information systems was examined using electronic databases (Pubmed, Google scholar) resources and the characteristics of the modeling system and its effect on the development and design of the health information systems were analyzed. Results. Analyzing the subject indicated that Provident modeling of health information systems should provide for quick access to many health data resources in a way that patients' data can be used in order to expand distant services and comprehensive Medical Imaging advices. Also these experiences show that progress in the infrastructure development stages through gradual and repeated evolution process of user requirements is stronger and this can lead to a decline in the cycle of requirements engineering process in the design of Medical Imaging information systems. Conclusion. Use case modeling approach can be effective in directing the problems of health and Medical Imaging information systems towards understanding, focusing on the start and analysis, better planning, repetition, and control

Morphological Characterization of Nanofibers: Methods and Application in Practice

Directory of Open Access Journals (Sweden)

Jakub Širc

2012-01-01

Full Text Available Biomedical applications such as wound dressing for skin regeneration, stem cell transplantation, or drug delivery require special demands on the three-dimensional porous scaffolds. Besides the biocompatibility and mechanical properties, the morphology is the most important attribute of the scaffold. Specific surface area, volume, and size of the pores have considerable effect on cell adhesion, growth, and proliferation. In the case of incorporated biologically active substances, their release is also influenced by the internal structure of nanofibers. Although many scientific papers are focused on the preparation of nanofibers and evaluation of biological tests, the morphological characterization was described just briefly as service methods. The aim of this paper is to summarize the methods applicable for morphological characterization of nanofibers and supplement it by the results of our research. Needleless electrospinning technique was used to prepare nanofibers from polylactide, poly(ε-caprolactone, gelatin, and polyamide. Scanning electron microscopy was used to evaluate the fiber diameters and to reveal eventual artifacts in the nanofibrous structure. Nitrogen adsorption/desorption measurements were employed to measure the specific surface areas. Mercury porosimetry was used to determine total porosities and compare pore size distributions of the prepared samples.

Automatic Annotation Method on Learners' Opinions in Case Method Discussion

Science.gov (United States)

Samejima, Masaki; Hisakane, Daichi; Komoda, Norihisa

2015-01-01

Purpose: The purpose of this paper is to annotate an attribute of a problem, a solution or no annotation on learners' opinions automatically for supporting the learners' discussion without a facilitator. The case method aims at discussing problems and solutions in a target case. However, the learners miss discussing some of problems and solutions.…

Teaching Agricultural Policy with the Case Method.

Science.gov (United States)

Stuhler, E. A.

1994-01-01

Two groups of agriculture students were taught with case studies and one group without (about 30 students in each group). Case-method groups had greater gains in cognitive performance and changed motivation and attitudes. Case studies had a positive effect on the development of problem-solving skills. (SK)

CASE METHOD: THE STORY OF THE DEVELOPMENT AND USE OF THE METHOD IN EDUCATION

Directory of Open Access Journals (Sweden)

Светлана Юрьевна Грузкова

2013-08-01

Full Text Available This article deals with the history of origin and issue of case-study method (of a кейс-method in the practice of professional education, which is based on case studies. The distinctive feature of the case-study method is to create a problematic situation on the basis of the facts of real life. As a method, analysis of situations-has become widespread in the world in the 70-80 years, in the same period, he became known in the USSR. This method was used at the beginning, when training managers mainly economic universities to form the students ' ability to make decisions. It is connected with the changes taking place in the economy, because at that time, it has generated substantial reform demand for specialists who know how to act in situations of uncertainty, high risk specialists who can analyze and make decisions. On the one hand, as the authors note, the wide dissemination of this method in education due to its orientation, so that the case method is focused not so much on the development of specific knowledge or skills, as on the development of the common intellectual and communicative capacity of the trainee and the training. In addition, the case method is quite effective in training, he can be connected easily enough with other learning methods. On the other hand, have been certain difficulties in introducing the case-study method in the practice of professional education: general orientation for the development of education and development of the quality requirements for surface treatment, specialist teachers to the methodological basis for the other method.DOI: http://dx.doi.org/10.12731/2218-7405-2013-6-24

Advanced scientific computational methods and their applications of nuclear technologies. (1) Overview of scientific computational methods, introduction of continuum simulation methods and their applications (1)

International Nuclear Information System (INIS)

Oka, Yoshiaki; Okuda, Hiroshi

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the first issue showing their overview and introduction of continuum simulation methods. Finite element method as their applications is also reviewed. (T. Tanaka)

The Worst-Case Weighted Multi-Objective Game with an Application to Supply Chain Competitions.

Science.gov (United States)

Qu, Shaojian; Ji, Ying

2016-01-01

In this paper, we propose a worst-case weighted approach to the multi-objective n-person non-zero sum game model where each player has more than one competing objective. Our "worst-case weighted multi-objective game" model supposes that each player has a set of weights to its objectives and wishes to minimize its maximum weighted sum objectives where the maximization is with respect to the set of weights. This new model gives rise to a new Pareto Nash equilibrium concept, which we call "robust-weighted Nash equilibrium". We prove that the robust-weighted Nash equilibria are guaranteed to exist even when the weight sets are unbounded. For the worst-case weighted multi-objective game with the weight sets of players all given as polytope, we show that a robust-weighted Nash equilibrium can be obtained by solving a mathematical program with equilibrium constraints (MPEC). For an application, we illustrate the usefulness of the worst-case weighted multi-objective game to a supply chain risk management problem under demand uncertainty. By the comparison with the existed weighted approach, we show that our method is more robust and can be more efficiently used for the real-world applications.

A Case-Based Reasoning Method with Rank Aggregation

Science.gov (United States)

Sun, Jinhua; Du, Jiao; Hu, Jian

2018-03-01

In order to improve the accuracy of case-based reasoning (CBR), this paper addresses a new CBR framework with the basic principle of rank aggregation. First, the ranking methods are put forward in each attribute subspace of case. The ordering relation between cases on each attribute is got between cases. Then, a sorting matrix is got. Second, the similar case retrieval process from ranking matrix is transformed into a rank aggregation optimal problem, which uses the Kemeny optimal. On the basis, a rank aggregation case-based reasoning algorithm, named RA-CBR, is designed. The experiment result on UCI data sets shows that case retrieval accuracy of RA-CBR algorithm is higher than euclidean distance CBR and mahalanobis distance CBR testing.So we can get the conclusion that RA-CBR method can increase the performance and efficiency of CBR.

EXPLORATION BY MEANS OF GEOPHYSICAL METHODS OF GEOTHERMAL FIELDS AND CASE STUDIES

Directory of Open Access Journals (Sweden)

Züheyr KAMACI

1997-01-01

Full Text Available Geothermal energy which is one of the reuseable energy resources, can save as much as 77 million barrels of petroleum equivalent annually when used in the production of electricity and heating-environment. Geophysical exploration methods plays in important role in the fields of geothermal exploration, development and observational studies. Thermal and geoelectrical methods are the most effective methods which shows the temperature variation anomalies and mechanical drilling places. But, when the other methods of gravity, magnetic, radiometric, well geophysics and well logs can be used in conjunction with seismic tomography, apart from the mentioned geophysical exploration method, better results could be obtained. From the above mentioned facts various case history reports are given from our country and worldwide to determine geothermal energy resources by using geophysical exploration technique application. From these results of studies a 55 °C hot water artessian aquifer is found in the Uşak-Banaz geothermal field by applying geoelectrical methods.

Gravitational-Wave Data Analysis. Formalism and Sample Applications: The Gaussian Case

Directory of Open Access Journals (Sweden)

Królak Andrzej

2005-03-01

Full Text Available The article reviews the statistical theory of signal detection in application to analysis of deterministic gravitational-wave signals in the noise of a detector. Statistical foundations for the theory of signal detection and parameter estimation are presented. Several tools needed for both theoretical evaluation of the optimal data analysis methods and for their practical implementation are introduced. They include optimal signal-to-noise ratio, Fisher matrix, false alarm and detection probabilities, F-statistic, template placement, and fitting factor. These tools apply to the case of signals buried in a stationary and Gaussian noise. Algorithms to efficiently implement the optimal data analysis techniques are discussed. Formulas are given for a general gravitational-wave signal that includes as special cases most of the deterministic signals of interest.

Gravitational-Wave Data Analysis. Formalism and Sample Applications: The Gaussian Case

Directory of Open Access Journals (Sweden)

Piotr Jaranowski

2012-03-01

Full Text Available The article reviews the statistical theory of signal detection in application to analysis of deterministic gravitational-wave signals in the noise of a detector. Statistical foundations for the theory of signal detection and parameter estimation are presented. Several tools needed for both theoretical evaluation of the optimal data analysis methods and for their practical implementation are introduced. They include optimal signal-to-noise ratio, Fisher matrix, false alarm and detection probabilities, ℱ-statistic, template placement, and fitting factor. These tools apply to the case of signals buried in a stationary and Gaussian noise. Algorithms to efficiently implement the optimal data analysis techniques are discussed. Formulas are given for a general gravitational-wave signal that includes as special cases most of the deterministic signals of interest.

Branding through mobile applications : - A case study of Swedish campaign applications

OpenAIRE

Vikström, Henrik; Zheng, Caroline

2013-01-01

We are a few years into a paradigm shift where mobile Internet usage around the world is increasing fast. Smartphones have in Sweden become the device a substantial proportion of the population have, and companies have seen them as a new way to communicate with consumers. This thesis is a case study of four smartphone applications issued by companies in brand building purposes. The applications are King of the slope by Vattenfall, Körklar? by SalusAnsvar, McWrap Go&Get by McDonalds and M...

Advanced scientific computational methods and their applications to nuclear technologies. (3) Introduction of continuum simulation methods and their applications (3)

International Nuclear Information System (INIS)

Satake, Shin-ichi; Kunugi, Tomoaki

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the third issue showing the introduction of continuum simulation methods and their applications. Spectral methods and multi-interface calculation methods in fluid dynamics are reviewed. (T. Tanaka)

Supply chain planning and management method:the fruit purchasing company case

Directory of Open Access Journals (Sweden)

Julio Kyosen Nakatani

2018-06-01

Full Text Available Abstract On the world stage, Brazil is the third largest world fruit producer. However, purchasing fruit companies are suffering from the effects of fluctuations in production and demand, inefficiency in production and information trade, lack of understanding of the dynamics of supply and reduction in profitability for all members of the fruit production chain. The supply chain management has been touted as one of the ways to reduce this volatility and improve outcomes for all involved with the supply chain. However, results of recent researches do not relate it directly to the fruit industry. To solve this problem, the present research aimed to analyze the planning and management of the supply chain of a fruit purchasing company and identify contributions and improvements to the theories and methods related to supply chain management to propose a method for planning and management the supply chain of fruit purchasing companies. It was conducted a case study from a mango fruit purchasing company using interviews with industry experts to assess the applicability, functionality and usefulness from the managerial point of view of the proposed method. Data analysis was done through the cross analysis of the methods of the supply chain management and the description of the case. The results of the study allowed the development of a method for planning and management the supply chain of fruit purchasing company. With the proposition of this method is expected to contribute with a sequence of steps to assist in planning and management of supply chain managers and specialists from a fruit purchasing company.

The Application of Linear and Nonlinear Water Tanks Case Study in Teaching of Process Control

Science.gov (United States)

Li, Xiangshun; Li, Zhiang

2018-02-01

In the traditional process control teaching, the importance of passing knowledge is emphasized while the development of creative and practical abilities of students is ignored. Traditional teaching methods are not very helpful to breed a good engineer. Case teaching is a very useful way to improve students’ innovative and practical abilities. In the traditional case teaching, knowledge points are taught separately based on different examples or no examples, thus it is very hard to setup the whole knowledge structure. Though all the knowledge is learned, how to use the knowledge to solve engineering problems keeps challenging for students. In this paper, the linear and nonlinear tanks are taken as illustrative examples which involves several knowledge points of process control. The application method of each knowledge point is discussed in detail and simulated. I believe the case-based study will be helpful for students.

Data-driven remaining useful life prognosis techniques stochastic models, methods and applications

CERN Document Server

Si, Xiao-Sheng; Hu, Chang-Hua

2017-01-01

This book introduces data-driven remaining useful life prognosis techniques, and shows how to utilize the condition monitoring data to predict the remaining useful life of stochastic degrading systems and to schedule maintenance and logistics plans. It is also the first book that describes the basic data-driven remaining useful life prognosis theory systematically and in detail. The emphasis of the book is on the stochastic models, methods and applications employed in remaining useful life prognosis. It includes a wealth of degradation monitoring experiment data, practical prognosis methods for remaining useful life in various cases, and a series of applications incorporated into prognostic information in decision-making, such as maintenance-related decisions and ordering spare parts. It also highlights the latest advances in data-driven remaining useful life prognosis techniques, especially in the contexts of adaptive prognosis for linear stochastic degrading systems, nonlinear degradation modeling based pro...

Applying Process Improvement Methods to Clinical and Translational Research: Conceptual Framework and Case Examples.

Science.gov (United States)

Daudelin, Denise H; Selker, Harry P; Leslie, Laurel K

2015-12-01

There is growing appreciation that process improvement holds promise for improving quality and efficiency across the translational research continuum but frameworks for such programs are not often described. The purpose of this paper is to present a framework and case examples of a Research Process Improvement Program implemented at Tufts CTSI. To promote research process improvement, we developed online training seminars, workshops, and in-person consultation models to describe core process improvement principles and methods, demonstrate the use of improvement tools, and illustrate the application of these methods in case examples. We implemented these methods, as well as relational coordination theory, with junior researchers, pilot funding awardees, our CTRC, and CTSI resource and service providers. The program focuses on capacity building to address common process problems and quality gaps that threaten the efficient, timely and successful completion of clinical and translational studies. © 2015 The Authors. Clinical and Translational Science published by Wiley Periodicals, Inc.

The reflexive case study method

DEFF Research Database (Denmark)

Rittenhofer, Iris

2015-01-01

This paper extends the international business research on small to medium-sized enterprises (SME) at the nexus of globalization. Based on a conceptual synthesis across disciplines and theoretical perspectives, it offers management research a reflexive method for case study research of postnational...

Silver nanoparticles: Synthesis methods, bio-applications and properties.

Science.gov (United States)

Abbasi, Elham; Milani, Morteza; Fekri Aval, Sedigheh; Kouhi, Mohammad; Akbarzadeh, Abolfazl; Tayefi Nasrabadi, Hamid; Nikasa, Parisa; Joo, San Woo; Hanifehpour, Younes; Nejati-Koshki, Kazem; Samiei, Mohammad

2016-01-01

Silver nanoparticles size makes wide range of new applications in various fields of industry. Synthesis of noble metal nanoparticles for applications such as catalysis, electronics, optics, environmental and biotechnology is an area of constant interest. Two main methods for Silver nanoparticles are the physical and chemical methods. The problem with these methods is absorption of toxic substances onto them. Green synthesis approaches overcome this limitation. Silver nanoparticles size makes wide range of new applications in various fields of industry. This article summarizes exclusively scalable techniques and focuses on strengths, respectively, limitations with respect to the biomedical applicability and regulatory requirements concerning silver nanoparticles.

Advanced scientific computational methods and their applications to nuclear technologies. (4) Overview of scientific computational methods, introduction of continuum simulation methods and their applications (4)

International Nuclear Information System (INIS)

Sekimura, Naoto; Okita, Taira

2006-01-01

Scientific computational methods have advanced remarkably with the progress of nuclear development. They have played the role of weft connecting each realm of nuclear engineering and then an introductory course of advanced scientific computational methods and their applications to nuclear technologies were prepared in serial form. This is the fourth issue showing the overview of scientific computational methods with the introduction of continuum simulation methods and their applications. Simulation methods on physical radiation effects on materials are reviewed based on the process such as binary collision approximation, molecular dynamics, kinematic Monte Carlo method, reaction rate method and dislocation dynamics. (T. Tanaka)

A business case method for business models

OpenAIRE

Meertens, Lucas Onno; Starreveld, E.; Iacob, Maria Eugenia; Nieuwenhuis, Lambertus Johannes Maria; Shishkov, Boris

2013-01-01

Intuitively, business cases and business models are closely connected. However, a thorough literature review revealed no research on the combination of them. Besides that, little is written on the evaluation of business models at all. This makes it difficult to compare different business model alternatives and choose the best one. In this article, we develop a business case method to objectively compare business models. It is an eight-step method, starting with business drivers and ending wit...

Modelling with the master equation solution methods and applications in social and natural sciences

CERN Document Server

Haag, Günter

2017-01-01

This book presents the theory and practical applications of the Master equation approach, which provides a powerful general framework for model building in a variety of disciplines. The aim of the book is to not only highlight different mathematical solution methods, but also reveal their potential by means of practical examples. Part I of the book, which can be used as a toolbox, introduces selected statistical fundamentals and solution methods for the Master equation. In Part II and Part III, the Master equation approach is applied to important applications in the natural and social sciences. The case studies presented mainly hail from the social sciences, including urban and regional dynamics, population dynamics, dynamic decision theory, opinion formation and traffic dynamics; however, some applications from physics and chemistry are treated as well, underlining the interdisciplinary modelling potential of the Master equation approach. Drawing upon the author’s extensive teaching and research experience...

Informetrics theory, methods and applications

CERN Document Server

Qiu, Junping; Yang, Siluo; Dong, Ke

2017-01-01

This book provides an accessible introduction to the history, theory and techniques of informetrics. Divided into 14 chapters, it develops the content system of informetrics from the theory, methods and applications; systematically analyzes the six basic laws and the theory basis of informetrics and presents quantitative analysis methods such as citation analysis and computer-aided analysis. It also discusses applications in information resource management, information and library science, science of science, scientific evaluation and the forecast field. Lastly, it describes a new development in informetrics- webometrics. Providing a comprehensive overview of the complex issues in today's environment, this book is a valuable resource for all researchers, students and practitioners in library and information science.

Fuzzy multiple attribute decision making methods and applications

CERN Document Server

Chen, Shu-Jen

1992-01-01

This monograph is intended for an advanced undergraduate or graduate course as well as for researchers, who want a compilation of developments in this rapidly growing field of operations research. This is a sequel to our previous works: "Multiple Objective Decision Making--Methods and Applications: A state-of-the-Art Survey" (No.164 of the Lecture Notes); "Multiple Attribute Decision Making--Methods and Applications: A State-of-the-Art Survey" (No.186 of the Lecture Notes); and "Group Decision Making under Multiple Criteria--Methods and Applications" (No.281 of the Lecture Notes). In this monograph, the literature on methods of fuzzy Multiple Attribute Decision Making (MADM) has been reviewed thoroughly and critically, and classified systematically. This study provides readers with a capsule look into the existing methods, their characteristics, and applicability to the analysis of fuzzy MADM problems. The basic concepts and algorithms from the classical MADM methods have been used in the development of the f...

Hybrid Fundamental Solution Based Finite Element Method: Theory and Applications

Directory of Open Access Journals (Sweden)

Changyong Cao

2015-01-01

Full Text Available An overview on the development of hybrid fundamental solution based finite element method (HFS-FEM and its application in engineering problems is presented in this paper. The framework and formulations of HFS-FEM for potential problem, plane elasticity, three-dimensional elasticity, thermoelasticity, anisotropic elasticity, and plane piezoelectricity are presented. In this method, two independent assumed fields (intraelement filed and auxiliary frame field are employed. The formulations for all cases are derived from the modified variational functionals and the fundamental solutions to a given problem. Generation of elemental stiffness equations from the modified variational principle is also described. Typical numerical examples are given to demonstrate the validity and performance of the HFS-FEM. Finally, a brief summary of the approach is provided and future trends in this field are identified.

The DQ and DQΦ electronic structure diabatization methods: Validation for general applications

Energy Technology Data Exchange (ETDEWEB)

Hoyer, Chad E.; Parker, Kelsey; Gagliardi, Laura, E-mail: gagliard@umn.edu, E-mail: truhlar@umn.edu; Truhlar, Donald G., E-mail: gagliard@umn.edu, E-mail: truhlar@umn.edu [Department of Chemistry, Chemical Theory Center, and Minnesota Supercomputing Institute, University of Minnesota, 207 Pleasant St. SE, Minneapolis, Minnesota 55455-0431 (United States)

2016-05-21

We recently proposed the dipole-quadrupole (DQ) method for transforming adiabatic electronic states to diabatic states by using matrix elements of the dipole and quadrupole operators, and we applied the method to 3-state diabatizations of LiH and phenol. Here we extend the method to also include the electrostatic potential, and we call the resulting method the DQΦ method, which denotes the dipole–quadrupole–electrostatic-potential diabatization method. The electrostatic potential provides extra flexibility, and the goal of the present work is to test and illustrate the robustness of the methods for producing diabatic potential energy curves that tend to the adiabatic curves away from crossings and avoided crossings and are smooth in regions of crossings and avoided crossings. We illustrate the generality of the methods by an application to LiH with four states and by two-state diabatizations of HCl, (H{sub 2}){sub 2}, O{sub 3}, and the reaction Li + HF → LiF + H. We find that—if enough states are included—the DQ method does not have a significant dependence on the parameter weighting the quadrupole moment, and a geometry-independent value of 10 a{sub 0}{sup −2} is adequate in all cases tested. We also find that the addition of the electrostatic potential improves the diabatic potentials in some cases and provides an additional property useful for increasing the generality of the method for diabatization.

Quantification of Strategic Plans Through the Business Budget: A Practical Application Using Stochastic Methods

Directory of Open Access Journals (Sweden)

Marino Luiz Eyerkaufer

2014-12-01

Full Text Available Traditionally, the process of estimating the quantitative predictions of the strategic plan through the budget happens as from the deterministic data, together with analysis of factors of internal and external environments. As from the budget data decisions are made, often before the fact, which creates uncertainty as to the assertiveness of forecasts. Combined with the traditional preparation methods of corporate budget forecasts, this study presents an application of stochastic methods where the probabilism is presented as an alternative for the minimization of uncertainties related to the assertiveness of the estimates. It also demonstrates itself, as from a practical application, the use of the Monte Carlo method in the sales forecasting; at the same time it is tested the probability of these sales forecasting be materialized within certain intervals that meet the investors’ expectations, by using the limit central theorem and, finally, by using the absorbing Markov chain, it is demonstrated the overall performance of the system as from the funds input and output. The study was limited to a basic application of stochastic methods as from a hypothetical case which, however, allowed to  conclude that both methods, together or separately, can minimize the effects of uncertainty in budget forecasts.

Activity measurement by using γ-ray sum peak method considering intake radioactivity and its application

International Nuclear Information System (INIS)

Miyahara, Hiroshi; Narita, Norihiko; Tomita, Kenichi; Katoh, Yoshichika; Mori, Chizuo; Momose, Takumaro; Shinohara, Kunihiko

2000-01-01

It is important to measure external and internal exposure dose in the case of accident. The external exposure can be measured by various dosimeters, but the internal exposure is usually calculated from estimated amounts of intake radioactivity because of difficulty of direct measurement. Detection efficiency of human counter used in direct measurement is necessary, but there is no effective method to determine it for non-uniform distribution. The γ-ray sum peak method is tried for the cascade γ-ray emitter under the consideration of small diffusion such as just after intake. After disintegration rates of sources of 46 Sc and 60 Co were determined by 4πβ-γ coincidence method, γ-ray spectra were measured at various positions. Calculated disintegration rates by sum peak method agreed with those by coincidence method within 10%. The similar results were obtained for distributed plural sources in restricted condition. It is also investigated as application for the case that the other nuclide is contained in it. Using peak-to-total ratios measured in advance, the disintegration rates were determined only from the peak intensities. In this case the results had systematic uncertainty of about 20%. (author)

Using a fuzzy comprehensive evaluation method to determine product usability: A test case.

Science.gov (United States)

Zhou, Ronggang; Chan, Alan H S

2017-01-01

In order to take into account the inherent uncertainties during product usability evaluation, Zhou and Chan [1] proposed a comprehensive method of usability evaluation for products by combining the analytic hierarchy process (AHP) and fuzzy evaluation methods for synthesizing performance data and subjective response data. This method was designed to provide an integrated framework combining the inevitable vague judgments from the multiple stages of the product evaluation process. In order to illustrate the effectiveness of the model, this study used a summative usability test case to assess the application and strength of the general fuzzy usability framework. To test the proposed fuzzy usability evaluation framework [1], a standard summative usability test was conducted to benchmark the overall usability of a specific network management software. Based on the test data, the fuzzy method was applied to incorporate both the usability scores and uncertainties involved in the multiple components of the evaluation. Then, with Monte Carlo simulation procedures, confidence intervals were used to compare the reliabilities among the fuzzy approach and two typical conventional methods combining metrics based on percentages. This case study showed that the fuzzy evaluation technique can be applied successfully for combining summative usability testing data to achieve an overall usability quality for the network software evaluated. Greater differences of confidence interval widths between the method of averaging equally percentage and weighted evaluation method, including the method of weighted percentage averages, verified the strength of the fuzzy method.

Bioethics education in clinical settings: theory and practice of the dilemma method of moral case deliberation.

Science.gov (United States)

Stolper, Margreet; Molewijk, Bert; Widdershoven, Guy

2016-07-22

Moral Case Deliberation is a specific form of bioethics education fostering professionals' moral competence in order to deal with their moral questions. So far, few studies focus in detail on Moral Case Deliberation methodologies and their didactic principles. The dilemma method is a structured and frequently used method in Moral Case Deliberation that stimulates methodological reflection and reasoning through a systematic dialogue on an ethical issue experienced in practice. In this paper we present a case-study of a Moral Case Deliberation with the dilemma method in a health care institution for people with an intellectual disability, describing the theoretical background and the practical application of the dilemma method. The dilemma method focuses on moral experiences of participants concerning a concrete dilemma in practice. By an in-depth description of each of the steps of the deliberation process, we elucidate the educational value and didactics of this specific method. The didactics and methodical steps of the dilemma method both supported and structured the dialogical reflection process of the participants. The process shows that the participants learned to recognize the moral dimension of the issue at stake and were able to distinguish various perspectives and reasons in a systematic manner. The facilitator played an important role in the learning process of the participants, by assisting them in focusing on and exploring moral aspects of the case. The reflection and learning process, experienced by the participants, shows competency-based characteristics. The role of the facilitator is that of a Socratic teacher with specific knowledge and skills, fostering reflection, inquiry and dialogue. The specific didactics of the dilemma method is well suited for teaching bioethics in clinical settings. The dilemma method follows an inductive learning approach through a dialogical moral inquiry in which participants develop not only knowledge but also skills

Lattice Boltzmann methods for complex micro-flows: applicability and limitations for practical applications

Energy Technology Data Exchange (ETDEWEB)

Suga, K, E-mail: suga@me.osakafu-u.ac.jp [Department of Mechanical Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Naka-ku, Sakai, Osaka 599-8531 (Japan)

2013-06-15

The extensive evaluation studies of the lattice Boltzmann method for micro-scale flows ({mu}-flow LBM) by the author's group are summarized. For the two-dimensional test cases, force-driven Poiseuille flows, Couette flows, a combined nanochannel flow, and flows in a nanochannel with a square- or triangular cylinder are discussed. The three-dimensional (3D) test cases are nano-mesh flows and a flow between 3D bumpy walls. The reference data for the complex test flow geometries are from the molecular dynamics simulations of the Lennard-Jones fluid by the author's group. The focused flows are mainly in the slip and a part of the transitional flow regimes at Kn < 1. The evaluated schemes of the {mu}-flow LBMs are the lattice Bhatnagar-Gross-Krook and the multiple-relaxation time LBMs with several boundary conditions and discrete velocity models. The effects of the discrete velocity models, the wall boundary conditions, the near-wall correction models of the molecular mean free path and the regularization process are discussed to confirm the applicability and the limitations of the {mu}-flow LBMs for complex flow geometries. (invited review)

Lattice Boltzmann methods for complex micro-flows: applicability and limitations for practical applications

International Nuclear Information System (INIS)

Suga, K

2013-01-01

The extensive evaluation studies of the lattice Boltzmann method for micro-scale flows (μ-flow LBM) by the author's group are summarized. For the two-dimensional test cases, force-driven Poiseuille flows, Couette flows, a combined nanochannel flow, and flows in a nanochannel with a square- or triangular cylinder are discussed. The three-dimensional (3D) test cases are nano-mesh flows and a flow between 3D bumpy walls. The reference data for the complex test flow geometries are from the molecular dynamics simulations of the Lennard-Jones fluid by the author's group. The focused flows are mainly in the slip and a part of the transitional flow regimes at Kn < 1. The evaluated schemes of the μ-flow LBMs are the lattice Bhatnagar–Gross–Krook and the multiple-relaxation time LBMs with several boundary conditions and discrete velocity models. The effects of the discrete velocity models, the wall boundary conditions, the near-wall correction models of the molecular mean free path and the regularization process are discussed to confirm the applicability and the limitations of the μ-flow LBMs for complex flow geometries. (invited review)

Application of 1 D Finite Element Method in Combination with Laminar Solution Method for Pipe Network Analysis

Science.gov (United States)

Dudar, O. I.; Dudar, E. S.

2017-11-01

The features of application of the 1D dimensional finite element method (FEM) in combination with the laminar solutions method (LSM) for the calculation of underground ventilating networks are considered. In this case the processes of heat and mass transfer change the properties of a fluid (binary vapour-air mix). Under the action of gravitational forces it leads to such phenomena as natural draft, local circulation, etc. The FEM relations considering the action of gravity, the mass conservation law, the dependence of vapour-air mix properties on the thermodynamic parameters are derived so that it allows one to model the mentioned phenomena. The analogy of the elastic and plastic rod deformation processes to the processes of laminar and turbulent flow in a pipe is described. Owing to this analogy, the guaranteed convergence of the elastic solutions method for the materials of plastic type means the guaranteed convergence of the LSM for any regime of a turbulent flow in a rough pipe. By means of numerical experiments the convergence rate of the FEM - LSM is investigated. This convergence rate appeared much higher than the convergence rate of the Cross - Andriyashev method. Data of other authors on the convergence rate comparison for the finite element method, the Newton method and the method of gradient are provided. These data allow one to conclude that the FEM in combination with the LSM is one of the most effective methods of calculation of hydraulic and ventilating networks. The FEM - LSM has been used for creation of the research application programme package “MineClimate” allowing to calculate the microclimate parameters in the underground ventilating networks.

LightCDD: Application of a Capability-Driven Development Method for Start-ups Development

Directory of Open Access Journals (Sweden)

Hasan Koç

2017-04-01

Full Text Available Novice innovators and entrepreneurs face the risk of designing naive business models. In fact, lack of viability in business models is perceived to be a major threat for the start-up success. Both the literature and the responses we gathered from experts in incubation present evidences of this problem. The LightCDD method helps entrepreneurs in the analysis, design and specification of start-ups that are context aware and adaptive to contextual changes and evolution. In this article we describe the LightCDD method, a context-aware enterprise modeling method that is tailored for business model generation. The LightCDD applies a lightweight Capability‑Driven Development (CDD methodology. It reduces the set of modeling constructs and guidelines to facilitate its adoption by entrepreneurs, yet keeping it expressive enough for their purposes and, at the same time, compatible with the CDD methodology. We provide a booklet with the LightCDD method for start-ups development. The feasibility of the LightCDD method is validated by means of its application to one start-up development case. From a practitioner viewpoint (entrepreneurs and experts in incubation, it is important to provide integrative modeling perspectives to specify business ideas, but it is vital to keep it light. The LightCDD is giving a step forward in this direction. From a researcher point of view, the LightCDD booklet facilitates the application of LightCDD to different start-up development cases. The feasibility validation has produced important feedback for further empirical validation exercises in which is necessary to study the scalability and sensitivity of LightCDD.

Unsupervised text mining methods for literature analysis: a case study for Thomas Pynchon's V.

Directory of Open Access Journals (Sweden)

Christos Iraklis Tsatsoulis

2013-08-01

Full Text Available We investigate the use of unsupervised text mining methods for the analysis of prose literature works, using Thomas Pynchon's novel 'V'. as a case study. Our results suggest that such methods may be employed to reveal meaningful information regarding the novel’s structure. We report results using a wide variety of clustering algorithms, several distinct distance functions, and different visualization techniques. The application of a simple topic model is also demonstrated. We discuss the meaningfulness of our results along with the limitations of our approach, and we suggest some possible paths for further study.

The Worst-Case Weighted Multi-Objective Game with an Application to Supply Chain Competitions.

Directory of Open Access Journals (Sweden)

Shaojian Qu

Full Text Available In this paper, we propose a worst-case weighted approach to the multi-objective n-person non-zero sum game model where each player has more than one competing objective. Our "worst-case weighted multi-objective game" model supposes that each player has a set of weights to its objectives and wishes to minimize its maximum weighted sum objectives where the maximization is with respect to the set of weights. This new model gives rise to a new Pareto Nash equilibrium concept, which we call "robust-weighted Nash equilibrium". We prove that the robust-weighted Nash equilibria are guaranteed to exist even when the weight sets are unbounded. For the worst-case weighted multi-objective game with the weight sets of players all given as polytope, we show that a robust-weighted Nash equilibrium can be obtained by solving a mathematical program with equilibrium constraints (MPEC. For an application, we illustrate the usefulness of the worst-case weighted multi-objective game to a supply chain risk management problem under demand uncertainty. By the comparison with the existed weighted approach, we show that our method is more robust and can be more efficiently used for the real-world applications.

The Case Method as a Form of Communication.

Science.gov (United States)

Kingsley, Lawrence

1982-01-01

Questions the wisdom of obscurantism as a basis for case writing. Contends that in its present state the case method, for most students, is an inefficient way of learning. Calls for a consensus that cases should be as well-written as other forms of scholarship. (PD)

[Application of ARIMA model to predict number of malaria cases in China].

Science.gov (United States)

Hui-Yu, H; Hua-Qin, S; Shun-Xian, Z; Lin, A I; Yan, L U; Yu-Chun, C; Shi-Zhu, L I; Xue-Jiao, T; Chun-Li, Y; Wei, H U; Jia-Xu, C

2017-08-15

Objective To study the application of autoregressive integrated moving average (ARIMA) model to predict the monthly reported malaria cases in China, so as to provide a reference for prevention and control of malaria. Methods SPSS 24.0 software was used to construct the ARIMA models based on the monthly reported malaria cases of the time series of 20062015 and 2011-2015, respectively. The data of malaria cases from January to December, 2016 were used as validation data to compare the accuracy of the two ARIMA models. Results The models of the monthly reported cases of malaria in China were ARIMA (2, 1, 1) (1, 1, 0) 12 and ARIMA (1, 0, 0) (1, 1, 0) 12 respectively. The comparison between the predictions of the two models and actual situation of malaria cases showed that the ARIMA model based on the data of 2011-2015 had a higher accuracy of forecasting than the model based on the data of 2006-2015 had. Conclusion The establishment and prediction of ARIMA model is a dynamic process, which needs to be adjusted unceasingly according to the accumulated data, and in addition, the major changes of epidemic characteristics of infectious diseases must be considered.

A method to incorporate interstitial components into the TPS gynecologic rigid applicator library

Directory of Open Access Journals (Sweden)

Antonio Otal

2017-01-01

Full Text Available Purpose: T2 magnetic resonance imaging (MRI is recommended as the imaging modality for image-guided brachytherapy. In locally advanced cervical carcinoma, combined endocavitary and interstitial applicators are appropriate (Vienna or Utrecht. To cover extensive disease, Template Benidorm (TB was developed. Treatment planning system applicator libraries are currently unavailable for the Utrecht applicator or the TB. The purpose of this work is to develop an applicator library for both applicators. Material and methods: The library developed in this work has been used in the Oncentra Brachytherapy TPS, version 4.3.0, which has a brachytherapy module that includes a library of rigid applicators. To add the needles of the Utrecht applicator and to model the TB, we used FreeCAD and MeshLab. The reconstruction process was based on the points that the rigid section and the interstitial part have in common. This, together with the free length, allowed us to ascertain the position of the tip. Results: In case of the Utrecht applicator, one of the sources of uncertainty in the reconstruction was determining the distance of the tip of needle from the ovoid. In case of the TB, the large number of needles involved made their identification time consuming. The developed library resolved both issues. Conclusions : The developed library for the Utrecht and TB is feasible and efficient improving accuracy. It allows all the required treatment planning to proceed using just a T2 MRI sequence. The additional use of specific free available software applications makes it possible to add this information to the already existing library of the Oncentra Brachytherapy TPS. Specific details not included on this manuscript will be available under request. This library is also currently being implemented also into the Sagiplan v 2.0 TPS.

Application of the tack weld to cask impact limiter case

International Nuclear Information System (INIS)

Ku, J. H.; Choung, W. M.; You, G. S.; Park, S. W.

2001-01-01

The objective of this paper is to evaluate the benefit of the application of intermittent tack weld to the cask impact limiter case in the cask impact accident. This paper describes the test results of weldment rupture of foam filled tube type energy absorber and analytical evaluation of the effect of intermittent tack weld to the cask impact limiter case on the cask impact behavior. Prior to the cask impact analysis, the evaluation of weldment joint was carried out for intermittent tack weldment considering the weldment rupture. The intermittent tack welded part is weaker than ordinary weldment so ruptured if the stress exceeds certain limit. The rupture of the impact limiter case causes to lose its constraining effect for the wood blocks, which are filled into the metal incasement between the case and the gussets. The application of intermittent tack weld to the impact limiter case showed great advantage in vertical and horizontal drop impacts

Improved oxygen-activation method for determining water flow behind casing

International Nuclear Information System (INIS)

McKeon, D.C.; Scott, H.D.; Olesen, J.R.; Patton, G.L.; Mitchell, R.J.

1991-01-01

This paper reports on impulse activation which is a new oxygen-activation technique developed to detect vertical water flow and to provide a quantitative measure of water flow velocity and flow rate. Flow-loop measurements made over a wide range of water velocities are in good agreement with theoretical predictions. Measurements of up- and downward channel flow were made at the U.S. Environmental Protection Agency (EPA) leak test well in Ada, OK, to demonstrate the technique in a controlled environment and to confirm that EPA requirements have been met. A major advantage of this method over previous procedures is that a measurement is a known zero-flow zone is not required. The impulse-activation technique has improved sensitivity to both low and high flow rates. In the EPA leak test well, the technique successfully discriminated between 0- and 1.4 ft/min flow conditions. The lowest quantified velocity was 1.8 ft/min or 10 BWPD, significantly below the EPA requirement of 3 ft/min. The upper limit of detection has not been determined by exceeds 137 ft/min. The water flow log (WFL SM ) measurement uses the impulse-activation technique and a Dual-Bust SM , thermal-decay-time (TDT SM ) tool to detect water flow behind casing. An important application of this measurement is testing for fluid migration in the wellbore as part of the mechanical integrity testing process for Class I and II disposal wells. The new oxygen-activation measurement was used in numerous production wells to identify the presence of water flow behind casing. Additional applications include the identification of open fractures in horizontal wells and the quantification of water flow in the tubing/casing annulus in injection and production wells

The SIESTA method; developments and applicability

International Nuclear Information System (INIS)

Artacho, Emilio; Anglada, E; Dieguez, O; Gale, J D; Garcia, A; Junquera, J; Martin, R M; Ordejon, P; Pruneda, J M; Sanchez-Portal, D; Soler, J M

2008-01-01

Recent developments in and around the SIESTA method of first-principles simulation of condensed matter are described and reviewed, with emphasis on (i) the applicability of the method for large and varied systems (ii) efficient basis sets for the standards of accuracy of density-functional methods (iii) new implementations, and (iv) extensions beyond ground-state calculations

Finite element method - theory and applications

International Nuclear Information System (INIS)

Baset, S.

1992-01-01

This paper summarizes the mathematical basis of the finite element method. Attention is drawn to the natural development of the method from an engineering analysis tool into a general numerical analysis tool. A particular application to the stress analysis of rubber materials is presented. Special advantages and issues associated with the method are mentioned. (author). 4 refs., 3 figs

Extending the applicability of multigrid methods

International Nuclear Information System (INIS)

Brannick, J; Brezina, M; Falgout, R; Manteuffel, T; McCormick, S; Ruge, J; Sheehan, B; Xu, J; Zikatanov, L

2006-01-01

Multigrid methods are ideal for solving the increasingly large-scale problems that arise in numerical simulations of physical phenomena because of their potential for computational costs and memory requirements that scale linearly with the degrees of freedom. Unfortunately, they have been historically limited by their applicability to elliptic-type problems and the need for special handling in their implementation. In this paper, we present an overview of several recent theoretical and algorithmic advances made by the TOPS multigrid partners and their collaborators in extending applicability of multigrid methods. specific examples that are presented include quantum chromodynamics, radiation transport, and electromagnetics

Particle methods: An introduction with applications

Directory of Open Access Journals (Sweden)

Moral Piere Del

2014-01-01

Full Text Available Interacting particle methods are increasingly used to sample from complex high-dimensional distributions. They have found a wide range of applications in applied probability, Bayesian statistics and information engineering. Understanding rigorously these new Monte Carlo simulation tools leads to fascinating mathematics related to Feynman-Kac path integral theory and their interacting particle interpretations. In these lecture notes, we provide a pedagogical introduction to the stochastic modeling and the theoretical analysis of these particle algorithms. We also illustrate these methods through several applications including random walk confinements, particle absorption models, nonlinear filtering, stochastic optimization, combinatorial counting and directed polymer models.

Remote Sensing of Water Quality in Multipurpose Reservoirs: Case Study Applications in Indonesia, Mexico, and Uruguay

Science.gov (United States)

Miralles-Wilhelm, F.; Serrat-Capdevila, A.; Rodriguez, D.

2017-12-01

This research is focused on development of remote sensing methods to assess surface water pollution issues, particularly in multipurpose reservoirs. Three case study applications are presented to comparatively analyze remote sensing techniquesforo detection of nutrient related pollution, i.e., Nitrogen, Phosphorus, Chlorophyll, as this is a major water quality issue that has been identified in terms of pollution of major water sources around the country. This assessment will contribute to a better understanding of options for nutrient remote sensing capabilities and needs and assist water agencies in identifying the appropriate remote sensing tools and devise an application strategy to provide information needed to support decision-making regarding the targeting and monitoring of nutrient pollution prevention and mitigation measures. A detailed review of the water quality data available from ground based measurements was conducted in order to determine their suitability for a case study application of remote sensing. In the first case study, the Valle de Bravo reservoir in Mexico City reservoir offers a larger database of water quality which may be used to better calibrate and validate the algorithms required to obtain water quality data from remote sensing raw data. In the second case study application, the relatively data scarce Lake Toba in Indonesia can be useful to illustrate the value added of remote sensing data in locations where water quality data is deficient or inexistent. The third case study in the Paso Severino reservoir in Uruguay offers a combination of data scarcity and persistent development of harmful algae blooms. Landsat-TM data was obteined for the 3 study sites and algorithms for three key water quality parameters that are related to nutrient pollution: Chlorophyll-a, Total Nitrogen, and Total Phosphorus were calibrated and validated at the study sites. The three case study applications were developed into capacity building/training workshops

The J-Matrix Method Developments and Applications

CERN Document Server

Alhaidari, Abdulaziz D; Heller, Eric J; Abdelmonem, Mohamed S

2008-01-01

This volume aims to provide the fundamental knowledge to appreciate the advantages of the J-matrix method and to encourage its use and further development. The J-matrix method is an algebraic method of quantum scattering with substantial success in atomic and nuclear physics. The accuracy and convergence property of the method compares favourably with other successful scattering calculation methods. Despite its thirty-year long history new applications are being found for the J-matrix method. This book gives a brief account of the recent developments and some selected applications of the method in atomic and nuclear physics. New findings are reported in which experimental results are compared to theoretical calculations. Modifications, improvements and extensions of the method are discussed using the language of the J-matrix. The volume starts with a Foreword by the two co-founders of the method, E.J. Heller and H.A. Yamani and it contains contributions from 24 prominent international researchers.

Application of the kernel method to the inverse geosounding problem.

Science.gov (United States)

Hidalgo, Hugo; Sosa León, Sonia; Gómez-Treviño, Enrique

2003-01-01

Determining the layered structure of the earth demands the solution of a variety of inverse problems; in the case of electromagnetic soundings at low induction numbers, the problem is linear, for the measurements may be represented as a linear functional of the electrical conductivity distribution. In this paper, an application of the support vector (SV) regression technique to the inversion of electromagnetic data is presented. We take advantage of the regularizing properties of the SV learning algorithm and use it as a modeling technique with synthetic and field data. The SV method presents better recovery of synthetic models than Tikhonov's regularization. As the SV formulation is solved in the space of the data, which has a small dimension in this application, a smaller problem than that considered with Tikhonov's regularization is produced. For field data, the SV formulation develops models similar to those obtained via linear programming techniques, but with the added characteristic of robustness.

Influence of the impact assessment method on the conclusions of a LCA study. Application to the case of a part made with virgin and recycled HDPE.

Science.gov (United States)

Simões, Carla L; Xará, Susana M; Bernardo, C A

2011-10-01

Recent legislation has stressed the need to decide the best end-of-life (EoL) option for post-consumer products considering their full life-cycle and the corresponding overall environmental impacts. The life cycle assessment (LCA) technique has become a common tool to evaluate those impacts. The present study aimed to contribute to the better understanding of the application of this technique, by evaluating the influence of the selection of the life cycle impact assessment (LCIA) method in its results and conclusions. A specific case study was chosen, using previous information related to an anti-glare lamellae (AGL) for highway use, made with virgin and recycled high-density polyethylene (HDPE). Five distinct LCIA methods were used: Eco-indicator 99, CML 2 (2000), EPS 2000, Eco-indicator 95 and EDIP 97. Consistent results between these methods were obtained for the Climate change, Ozone layer depletion, Acidification and Eutrophication environmental indicators. Conversely, the Summer smog indicator showed large discrepancies between impact assessment methods. The work sheds light on the advantages inherent in using various LCIA methods when doing the LCA study of a specific product, thus evidencing complementary analysis perspectives.

Sparse linear systems: Theory of decomposition, methods, technology, applications and implementation in Wolfram Mathematica

Energy Technology Data Exchange (ETDEWEB)

Pilipchuk, L. A., E-mail: pilipchik@bsu.by [Belarussian State University, 220030 Minsk, 4, Nezavisimosti avenue, Republic of Belarus (Belarus); Pilipchuk, A. S., E-mail: an.pilipchuk@gmail.com [The Natural Resources and Environmental Protestion Ministry of the Republic of Belarus, 220004 Minsk, 10 Kollektornaya Street, Republic of Belarus (Belarus)

2015-11-30

In this paper we propose the theory of decomposition, methods, technologies, applications and implementation in Wol-fram Mathematica for the constructing the solutions of the sparse linear systems. One of the applications is the Sensor Location Problem for the symmetric graph in the case when split ratios of some arc flows can be zeros. The objective of that application is to minimize the number of sensors that are assigned to the nodes. We obtain a sparse system of linear algebraic equations and research its matrix rank. Sparse systems of these types appear in generalized network flow programming problems in the form of restrictions and can be characterized as systems with a large sparse sub-matrix representing the embedded network structure.

Sparse linear systems: Theory of decomposition, methods, technology, applications and implementation in Wolfram Mathematica

International Nuclear Information System (INIS)

Pilipchuk, L. A.; Pilipchuk, A. S.

2015-01-01

In this paper we propose the theory of decomposition, methods, technologies, applications and implementation in Wol-fram Mathematica for the constructing the solutions of the sparse linear systems. One of the applications is the Sensor Location Problem for the symmetric graph in the case when split ratios of some arc flows can be zeros. The objective of that application is to minimize the number of sensors that are assigned to the nodes. We obtain a sparse system of linear algebraic equations and research its matrix rank. Sparse systems of these types appear in generalized network flow programming problems in the form of restrictions and can be characterized as systems with a large sparse sub-matrix representing the embedded network structure

Reconstruction of a ring applicator using CT imaging: impact of the reconstruction method and applicator orientation

International Nuclear Information System (INIS)

Hellebust, Taran Paulsen; Tanderup, Kari; Bergstrand, Eva Stabell; Knutsen, Bjoern Helge; Roeislien, Jo; Olsen, Dag Rune

2007-01-01

The purpose of this study is to investigate whether the method of applicator reconstruction and/or the applicator orientation influence the dose calculation to points around the applicator for brachytherapy of cervical cancer with CT-based treatment planning. A phantom, containing a fixed ring applicator set and six lead pellets representing dose points, was used. The phantom was CT scanned with the ring applicator at four different angles related to the image plane. In each scan the applicator was reconstructed by three methods: (1) direct reconstruction in each image (DR) (2) reconstruction in multiplanar reconstructed images (MPR) and (3) library plans, using pre-defined applicator geometry (LIB). The doses to the lead pellets were calculated. The relative standard deviation (SD) for all reconstruction methods was less than 3.7% in the dose points. The relative SD for the LIB method was significantly lower (p < 0.05) than for the DR and MPR methods for all but two points. All applicator orientations had similar dose calculation reproducibility. Using library plans for applicator reconstruction gives the most reproducible dose calculation. However, with restrictive guidelines for applicator reconstruction the uncertainties for all methods are low compared to other factors influencing the accuracy of brachytherapy

A Mixed Methods Sampling Methodology for a Multisite Case Study

Science.gov (United States)

Sharp, Julia L.; Mobley, Catherine; Hammond, Cathy; Withington, Cairen; Drew, Sam; Stringfield, Sam; Stipanovic, Natalie

2012-01-01

The flexibility of mixed methods research strategies makes such approaches especially suitable for multisite case studies. Yet the utilization of mixed methods to select sites for these studies is rarely reported. The authors describe their pragmatic mixed methods approach to select a sample for their multisite mixed methods case study of a…

Application of the finite element method to neutronics problems with inhomogeneous boundray conditions

International Nuclear Information System (INIS)

Yoo, K.J.

1982-01-01

The albedo boundary conditions are incorporated into the finite element method using bicubic Hermite element functions in order to reduce the computer memory and computation time in two-group diffusion calculations by excluding the reflector regions in computation space. The basis functions at the core-reflector interfaces are newly established to satisfy the albedo boundary conditions, and then the ''weak'' form of two-group diffusion equations is discretized using the principle of the weighted residual method in combination with the Galerkin approximation. The discretized two-group diffusion equation is then solved by the Gaussian elimination method with the scaled column pivoting algorithm in one-dimensional problem and Gauss-Seidel method in two-dimensional problem. Prior to the application of the method to two-group diffusion problems, the same method is applied to the one-speed neutron transport equation in a bare slab reactor with the vacuum boundary condition to confirm its usefulness in the diffusion calculations. To investigate the applicability of our diffusion method, several numerical calculations are performed: two-dimensional IAEA benchmark problem and two-dimensional ZION problem. The results are compared with the available results from the conventional finite difference and other finite element methods. If the albedo values are appropriately adjusted, our results of the two-dimensional IAEA benchmark problem are agreed within 0.002% of ksub(eff) with the fine mesh PDQ results. Comparing with CITATION results, one-eighth of core memory and one-fifteenth of computing time are required to obtain the same accuracy even though no acceleration technique is used in the present case. Also, it is found that the results are comparable with the other finite element results. However, no significant saving is obtained in computation time comparing with the other finite element results, where the reflector regions are explicity included. This mainly comes from

Using the Case Study Method in Teaching College Physics

Science.gov (United States)

Burko, Lior M.

2016-10-01

The case study teaching method has a long history (starting at least with Socrates) and wide current use in business schools, medical schools, law schools, and a variety of other disciplines. However, relatively little use is made of it in the physical sciences, specifically in physics or astronomy. The case study method should be considered by physics faculty as part of the effort to transition the teaching of college physics from the traditional frontal-lecture format to other formats that enhance active student participation. In this paper we endeavor to interest physics instructors in the case study method, and hope that it would also serve as a call for more instructors to produce cases that they use in their own classes and that can also be adopted by other instructors.

Methodology or method? A critical review of qualitative case study reports

Directory of Open Access Journals (Sweden)

Nerida Hyett

2014-05-01

Full Text Available Despite on-going debate about credibility, and reported limitations in comparison to other approaches, case study is an increasingly popular approach among qualitative researchers. We critically analysed the methodological descriptions of published case studies. Three high-impact qualitative methods journals were searched to locate case studies published in the past 5 years; 34 were selected for analysis. Articles were categorized as health and health services (n=12, social sciences and anthropology (n=7, or methods (n=15 case studies. The articles were reviewed using an adapted version of established criteria to determine whether adequate methodological justification was present, and if study aims, methods, and reported findings were consistent with a qualitative case study approach. Findings were grouped into five themes outlining key methodological issues: case study methodology or method, case of something particular and case selection, contextually bound case study, researcher and case interactions and triangulation, and study design inconsistent with methodology reported. Improved reporting of case studies by qualitative researchers will advance the methodology for the benefit of researchers and practitioners.

Methodology or method? A critical review of qualitative case study reports

Science.gov (United States)

Hyett, Nerida; Kenny, Amanda; Dickson-Swift, Virginia

2014-01-01

Despite on-going debate about credibility, and reported limitations in comparison to other approaches, case study is an increasingly popular approach among qualitative researchers. We critically analysed the methodological descriptions of published case studies. Three high-impact qualitative methods journals were searched to locate case studies published in the past 5 years; 34 were selected for analysis. Articles were categorized as health and health services (n=12), social sciences and anthropology (n=7), or methods (n=15) case studies. The articles were reviewed using an adapted version of established criteria to determine whether adequate methodological justification was present, and if study aims, methods, and reported findings were consistent with a qualitative case study approach. Findings were grouped into five themes outlining key methodological issues: case study methodology or method, case of something particular and case selection, contextually bound case study, researcher and case interactions and triangulation, and study design inconsistent with methodology reported. Improved reporting of case studies by qualitative researchers will advance the methodology for the benefit of researchers and practitioners. PMID:24809980

ELV Recycling Service Provider Selection Using the Hybrid MCDM Method: A Case Application in China

Directory of Open Access Journals (Sweden)

Fuli Zhou

2016-05-01

Full Text Available With the rapid depletion of natural resources and undesired environmental changes globally, more interest has been shown in the research of green supply chain practices, including end-of-life vehicle (ELV recycling. The ELV recycling is mandatory for auto-manufacturers by legislation for the purpose of minimizing potential environmental damages. The purpose of the present research is to determine the best choice of ELV recycling service provider by employing an integrating hybrid multi-criteria decision making (MCDM method. In this research, economic, environmental and social factors are taken into consideration. The linguistic variables and trapezoidal fuzzy numbers (TFNs are applied into this evaluation to deal with the vague and qualitative information. With the combined weight calculation of criteria based on fuzzy aggregation and Shannon Entropy techniques, the normative multi-criteria optimization technique (FVIKOR method is applied to explore the best solution. An application was performed based on the proposed hybrid MCDM method, and sensitivity analysis was conducted on different decision making scenarios. The present study provides a decision-making approach on ELV recycling business selection under sustainability and green philosophy with high robustness and easy implementation.

Method for evaluating the applicability and application rate wastes in soil; Metodo para avaliacao da aplicabilidade e taxa de aplicacao de residuos em solo

Energy Technology Data Exchange (ETDEWEB)

Linhares, Monica Moreira [Partime (Brazil); Seabra, Paulo Negrais [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

1991-01-01

Land treatment of refinery solid wastes has been practiced in the last few years by some PETROBRAS refineries. The biodegradation process is dynamic and complex, and incorrect monitoring may destroy the potential of the soil. Due to great differences both in terms of soils and of residues, each case must be monitored individually. We therefore developed a monitoring method for land farming systems based on the impact of the waste on indigenous soil microbial populations. The method is extremely simple, requiring only a gas chromatograph to evaluate the CO{sub 2} evolution, and can detect possible causes for low efficiency biodegradation processes. Conditions should then be altered, to ensure adequate functioning of the system.The method also allows for determination of the applicability of candidate wastes and of acceptable waste application rates in soil. (author) 2 refs., 7 figs.

Finite Element Method Application in Areal Rainfall Estimation Case Study; Mashhad Plain Basin

Directory of Open Access Journals (Sweden)

M. Irani

2016-10-01

ArcGIS10.0 were calculated. The base of the comparison was isohyetal method, because it showed the relief and took into account the effect of rain gauges, therefore it could represent rainfall data and region condition completely. The most accurate method was isohyetal method in estimating mean precipitation. Cross-validation was usually used to compare the accuracy of interpolation method. In this study, root mean square error (RMSE was used as validation criteria. Meanwhile, in the present study, the effects of altitude were neglected for two reasons. First, partial correlation coefficient of rainfall/altitude gradients was weak and second, the storms data were not accessible. Conclusions: In this study, the estimation of areal rainfall by Galerkin’s method was an innovative step. The case study was Mashhad basin (9909 km2 which included 42 rain gauges. Comparing other methods indicated that: Galerkin’s method was more efficient in comparison with arithmetic mean and it had more accurate results. Result of Galerkin’s method was similar to Kriging, IDW and Thiessen method. Unlike other methods, mesh of finite element could be used for calculating runoff, sediment and temperature and it did not need station weights. Even within one network the number of interpolation points can be varied, so that in a rugged region the number can be increased with little increase in effort, while in a more uniform region fewer are necessary.

Application of State Quantization-Based Methods in HEP Particle Transport Simulation

Science.gov (United States)

Santi, Lucio; Ponieman, Nicolás; Jun, Soon Yung; Genser, Krzysztof; Elvira, Daniel; Castro, Rodrigo

2017-10-01

Simulation of particle-matter interactions in complex geometries is one of the main tasks in high energy physics (HEP) research. An essential aspect of it is an accurate and efficient particle transportation in a non-uniform magnetic field, which includes the handling of volume crossings within a predefined 3D geometry. Quantized State Systems (QSS) is a family of numerical methods that provides attractive features for particle transportation processes, such as dense output (sequences of polynomial segments changing only according to accuracy-driven discrete events) and lightweight detection and handling of volume crossings (based on simple root-finding of polynomial functions). In this work we present a proof-of-concept performance comparison between a QSS-based standalone numerical solver and an application based on the Geant4 simulation toolkit, with its default Runge-Kutta based adaptive step method. In a case study with a charged particle circulating in a vacuum (with interactions with matter turned off), in a uniform magnetic field, and crossing up to 200 volume boundaries twice per turn, simulation results showed speedups of up to 6 times in favor of QSS while it being 10 times slower in the case with zero volume boundaries.

Advanced computational electromagnetic methods and applications

CERN Document Server

Li, Wenxing; Elsherbeni, Atef; Rahmat-Samii, Yahya

2015-01-01

This new resource covers the latest developments in computational electromagnetic methods, with emphasis on cutting-edge applications. This book is designed to extend existing literature to the latest development in computational electromagnetic methods, which are of interest to readers in both academic and industrial areas. The topics include advanced techniques in MoM, FEM and FDTD, spectral domain method, GPU and Phi hardware acceleration, metamaterials, frequency and time domain integral equations, and statistics methods in bio-electromagnetics.

An application of probabilistic safety assessment methods to model aircraft systems and accidents

Energy Technology Data Exchange (ETDEWEB)

Martinez-Guridi, G.; Hall, R.E.; Fullwood, R.R.

1998-08-01

A case study modeling the thrust reverser system (TRS) in the context of the fatal accident of a Boeing 767 is presented to illustrate the application of Probabilistic Safety Assessment methods. A simplified risk model consisting of an event tree with supporting fault trees was developed to represent the progression of the accident, taking into account the interaction between the TRS and the operating crew during the accident, and the findings of the accident investigation. A feasible sequence of events leading to the fatal accident was identified. Several insights about the TRS and the accident were obtained by applying PSA methods. Changes proposed for the TRS also are discussed.

Application of numerical analysis methods to thermoluminescence dosimetry

International Nuclear Information System (INIS)

Gomez Ros, J. M.; Delgado, A.

1989-01-01

This report presents the application of numerical methods to thermoluminescence dosimetry (TLD), showing the advantages obtained over conventional evaluation systems. Different configurations of the analysis method are presented to operate in specific dosimetric applications of TLD, such as environmental monitoring and mailed dosimetry systems for quality assurance in radiotherapy facilities. (Author) 10 refs

Prioritizing Test Cases for Memory Leaks in Android Applications

Institute of Scientific and Technical Information of China (English)

Ju Qian; Di Zhou

2016-01-01

Mobile applications usually can only access limited amount of memory. Improper use of the memory can cause memory leaks, which may lead to performance slowdowns or even cause applications to be unexpectedly killed. Although a large body of research has been devoted into the memory leak diagnosing techniques after leaks have been discovered, it is still challenging to find out the memory leak phenomena at first. Testing is the most widely used technique for failure discovery. However, traditional testing techniques are not directed for the discovery of memory leaks. They may spend lots of time on testing unlikely leaking executions and therefore can be inefficient. To address the problem, we propose a novel approach to prioritize test cases according to their likelihood to cause memory leaks in a given test suite. It firstly builds a prediction model to determine whether each test can potentially lead to memory leaks based on machine learning on selected code features. Then, for each input test case, we partly run it to get its code features and predict its likelihood to cause leaks. The most suspicious test cases will be suggested to run at first in order to reveal memory leak faults as soon as possible. Experimental evaluation on several Android applications shows that our approach is effective.

Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance, E706(IIIB)

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This test method describes the use of solid-state track recorders (SSTRs) for neutron dosimetry in light-water reactor (LWR) applications. These applications extend from low neutron fluence to high neutron fluence, including high power pressure vessel surveillance and test reactor irradiations as well as low power benchmark field measurement. (1) This test method replaces Method E 418. This test method is more detailed and special attention is given to the use of state-of-the-art manual and automated track counting methods to attain high absolute accuracies. In-situ dosimetry in actual high fluence-high temperature LWR applications is emphasized. 1.2 This test method includes SSTR analysis by both manual and automated methods. To attain a desired accuracy, the track scanning method selected places limits on the allowable track density. Typically good results are obtained in the range of 5 to 800 000 tracks/cm2 and accurate results at higher track densities have been demonstrated for some cases. (2) Trac...

Application of distinct element method to toppling failure of slopes

International Nuclear Information System (INIS)

Ishida, Tsuyoshi; Hibino, Satoshi; Kitahara, Yoshihiro; Asai, Yoshiyuki.

1985-01-01

Recently, the stability of slopes during earthquakes has become to be an important engineering problem, especially in case of the earthquake-proof design of nuclear power plants. But, for fissured rock slopes, some problems are remained unresolved, because they can not be treated as continua. The authors have been investigating toppling failure of slopes, from a point of view which regards a fissured rock mass as an assemblage of rigid blocks. DEM (Distinct Element Method) proposed by Cundall (1974) seems to be very helpful to such a investigation. So, in this paper, the applicability of DEM to toppling failure of slopes is examined through the comparison between DEM results and theoretical or experimental results using 3 simple models. (author)

A volumetric pulmonary CT segmentation method with applications in emphysema assessment

Science.gov (United States)

Silva, José Silvestre; Silva, Augusto; Santos, Beatriz S.

2006-03-01

A segmentation method is a mandatory pre-processing step in many automated or semi-automated analysis tasks such as region identification and densitometric analysis, or even for 3D visualization purposes. In this work we present a fully automated volumetric pulmonary segmentation algorithm based on intensity discrimination and morphologic procedures. Our method first identifies the trachea as well as primary bronchi and then the pulmonary region is identified by applying a threshold and morphologic operations. When both lungs are in contact, additional procedures are performed to obtain two separated lung volumes. To evaluate the performance of the method, we compared contours extracted from 3D lung surfaces with reference contours, using several figures of merit. Results show that the worst case generally occurs at the middle sections of high resolution CT exams, due the presence of aerial and vascular structures. Nevertheless, the average error is inferior to the average error associated with radiologist inter-observer variability, which suggests that our method produces lung contours similar to those drawn by radiologists. The information created by our segmentation algorithm is used by an identification and representation method in pulmonary emphysema that also classifies emphysema according to its severity degree. Two clinically proved thresholds are applied which identify regions with severe emphysema, and with highly severe emphysema. Based on this thresholding strategy, an application for volumetric emphysema assessment was developed offering new display paradigms concerning the visualization of classification results. This framework is easily extendable to accommodate other classifiers namely those related with texture based segmentation as it is often the case with interstitial diseases.

Stochastic methods for uncertainty treatment of functional variables in computer codes: application to safety studies

International Nuclear Information System (INIS)

Nanty, Simon

2015-01-01

This work relates to the framework of uncertainty quantification for numerical simulators, and more precisely studies two industrial applications linked to the safety studies of nuclear plants. These two applications have several common features. The first one is that the computer code inputs are functional and scalar variables, functional ones being dependent. The second feature is that the probability distribution of functional variables is known only through a sample of their realizations. The third feature, relative to only one of the two applications, is the high computational cost of the code, which limits the number of possible simulations. The main objective of this work was to propose a complete methodology for the uncertainty analysis of numerical simulators for the two considered cases. First, we have proposed a methodology to quantify the uncertainties of dependent functional random variables from a sample of their realizations. This methodology enables to both model the dependency between variables and their link to another variable, called co-variate, which could be, for instance, the output of the considered code. Then, we have developed an adaptation of a visualization tool for functional data, which enables to simultaneously visualize the uncertainties and features of dependent functional variables. Second, a method to perform the global sensitivity analysis of the codes used in the two studied cases has been proposed. In the case of a computationally demanding code, the direct use of quantitative global sensitivity analysis methods is intractable. To overcome this issue, the retained solution consists in building a surrogate model or meta model, a fast-running model approximating the computationally expensive code. An optimized uniform sampling strategy for scalar and functional variables has been developed to build a learning basis for the meta model. Finally, a new approximation approach for expensive codes with functional outputs has been

Dynamical Systems Method and Applications Theoretical Developments and Numerical Examples

CERN Document Server

Ramm, Alexander G

2012-01-01

Demonstrates the application of DSM to solve a broad range of operator equations The dynamical systems method (DSM) is a powerful computational method for solving operator equations. With this book as their guide, readers will master the application of DSM to solve a variety of linear and nonlinear problems as well as ill-posed and well-posed problems. The authors offer a clear, step-by-step, systematic development of DSM that enables readers to grasp the method's underlying logic and its numerous applications. Dynamical Systems Method and Applications begins with a general introduction and

Using the Case Study Method in Teaching College Physics

Science.gov (United States)

Burko, Lior M.

2016-01-01

The case study teaching method has a long history (starting at least with Socrates) and wide current use in business schools, medical schools, law schools, and a variety of other disciplines. However, relatively little use is made of it in the physical sciences, specifically in physics or astronomy. The case study method should be considered by…

Stepwise integral scaling method and its application to severe accident phenomena

International Nuclear Information System (INIS)

Ishii, M.; Zhang, G.

1993-10-01

Severe accidents in light water reactors are characterized by an occurrence of multiphase flow with complicated phase changes, chemical reaction and various bifurcation phenomena. Because of the inherent difficulties associated with full-scale testing, scaled down and simulation experiments are essential part of the severe accident analyses. However, one of the most significant shortcomings in the area is the lack of well-established and reliable scaling method and scaling criteria. In view of this, the stepwise integral scaling method is developed for severe accident analyses. This new scaling method is quite different from the conventional approach. However, its focus on dominant transport mechanisms and use of the integral response of the system make this method relatively simple to apply to very complicated multi-phase flow problems. In order to demonstrate its applicability and usefulness, three case studies have been made. The phenomena considered are (1) corium dispersion in DCH, (2) corium spreading in BWR MARK-I containment, and (3) incore boil-off and heating process. The results of these studies clearly indicate the effectiveness of their stepwise integral scaling method. Such a simple and systematic scaling method has not been previously available to severe accident analyses

[Application of Delphi method in traditional Chinese medicine clinical research].

Science.gov (United States)

Bi, Ying-fei; Mao, Jing-yuan

2012-03-01

In recent years, Delphi method has been widely applied in traditional Chinese medicine (TCM) clinical research. This article analyzed the present application situation of Delphi method in TCM clinical research, and discussed some problems presented in the choice of evaluation method, classification of observation indexes and selection of survey items. On the basis of present application of Delphi method, the author analyzed the method on questionnaire making, selection of experts, evaluation of observation indexes and selection of survey items. Furthermore, the author summarized the steps of application of Delphi method in TCM clinical research.

Stakeholder Perceptions of Cyberbullying Cases: Application of the Uniform Definition of Bullying.

Science.gov (United States)

Moreno, Megan A; Suthamjariya, Nina; Selkie, Ellen

2018-04-01

The Uniform Definition of Bullying was developed to address bullying and cyberbullying, and to promote consistency in measurement and policy. The purpose of this study was to understand community stakeholder perceptions of typical cyberbullying cases, and to evaluate how these case descriptions align with the Uniform Definition. In this qualitative case analysis we recruited stakeholders commonly involved in cyberbullying. We used purposeful sampling to identify and recruit adolescents and young adults, parents, and professionals representing education and health care. Participants were asked to write a typical case of cyberbullying and descriptors in the context of a group discussion. We applied content analysis to case excerpts using inductive and deductive approaches, and chi-squared tests for mixed methods analyses. A total of 68 participants contributed; participants included 73% adults and 27% adolescents and young adults. A total of 650 excerpts were coded from participants' example cases and 362 (55.6%) were consistent with components of the Uniform Definition. The most frequently mentioned component of the Uniform Definition was Aggressive Behavior (n = 218 excerpts), whereas Repeated was mentioned infrequently (n = 19). Most participants included two to three components of the Uniform Definition within an example case; none of the example cases included all components of the Uniform Definition. We found that most participants described cyberbullying cases using few components of the Uniform Definition. Findings can be applied toward considering refinement of the Uniform Definition to ensure stakeholders find it applicable to cyberbullying. Copyright © 2017 The Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

Combinatorial methods with computer applications

CERN Document Server

Gross, Jonathan L

2007-01-01

Combinatorial Methods with Computer Applications provides in-depth coverage of recurrences, generating functions, partitions, and permutations, along with some of the most interesting graph and network topics, design constructions, and finite geometries. Requiring only a foundation in discrete mathematics, it can serve as the textbook in a combinatorial methods course or in a combined graph theory and combinatorics course.After an introduction to combinatorics, the book explores six systematic approaches within a comprehensive framework: sequences, solving recurrences, evaluating summation exp

Analysis of the application of selected physico-chemical methods in eliminating odor nuisance of municipal facilities

Directory of Open Access Journals (Sweden)

Miller Urszula

2018-01-01

Full Text Available Operation of municipal management facilities is inseparable from the problem of malodorous compounds emissions to the atmospheric air. In that case odor nuisance is related to the chemical composition of waste, sewage and sludge as well as to the activity of microorganisms whose products of life processes can be those odorous compounds. Significant reduction of odorant emission from many sources can be achieved by optimizing parameters and conditions of processes. However, it is not always possible to limit the formation of odorants. In such cases it is best to use appropriate deodorizing methods. The choice of the appropriate method is based on in terms of physical parameters, emission intensity of polluted gases and their composition, if it is possible to determine. Among the solutions used in municipal economy, there can be distinguished physico-chemical methods such as sorption and oxidation. In cases where the source of the emission is not encapsulated, odor masking techniques are used, which consists of spraying preparations that neutralize unpleasant odors. The paper presents the characteristics of selected methods of eliminating odor nuisance and evaluation of their applicability in municipal management facilities.

Analysis of the application of selected physico-chemical methods in eliminating odor nuisance of municipal facilities

Science.gov (United States)

Miller, Urszula; Grzelka, Agnieszka; Romanik, Elżbieta; Kuriata, Magdalena

2018-01-01

Operation of municipal management facilities is inseparable from the problem of malodorous compounds emissions to the atmospheric air. In that case odor nuisance is related to the chemical composition of waste, sewage and sludge as well as to the activity of microorganisms whose products of life processes can be those odorous compounds. Significant reduction of odorant emission from many sources can be achieved by optimizing parameters and conditions of processes. However, it is not always possible to limit the formation of odorants. In such cases it is best to use appropriate deodorizing methods. The choice of the appropriate method is based on in terms of physical parameters, emission intensity of polluted gases and their composition, if it is possible to determine. Among the solutions used in municipal economy, there can be distinguished physico-chemical methods such as sorption and oxidation. In cases where the source of the emission is not encapsulated, odor masking techniques are used, which consists of spraying preparations that neutralize unpleasant odors. The paper presents the characteristics of selected methods of eliminating odor nuisance and evaluation of their applicability in municipal management facilities.

A method for detecting IBD regions simultaneously in multiple individuals--with applications to disease genetics

DEFF Research Database (Denmark)

Moltke, Ida; Albrechtsen, Anders; Hansen, Thomas V O

2011-01-01

genome containing disease-causing variants. However, IBD regions can be difficult to detect, especially in the common case where no pedigree information is available. In particular, all existing non-pedigree based methods can only infer IBD sharing between two individuals. Here, we present a new Markov...... Chain Monte Carlo method for detection of IBD regions, which does not rely on any pedigree information. It is based on a probabilistic model applicable to unphased SNP data. It can take inbreeding, allele frequencies, genotyping errors, and genomic distances into account. And most importantly, it can...

Methods and applications of analytical perturbation theory

International Nuclear Information System (INIS)

Kirchgraber, U.; Stiefel, E.

1978-01-01

This monograph on perturbation theory is based on various courses and lectures held by the authors at the ETH, Zurich and at the University of Texas, Austin. Its principal intention is to inform application-minded mathematicians, physicists and engineers about recent developments in this field. The reader is not assumed to have mathematical knowledge beyond what is presented in standard courses on analysis and linear algebra. Chapter I treats the transformations of systems of differential equations and the integration of perturbed systems in a formal way. These tools are applied in Chapter II to celestial mechanics and to the theory of tops and gyroscopic motion. Chapter III is devoted to the discussion of Hamiltonian systems of differential equations and exposes the algebraic aspects of perturbation theory showing also the necessary modifications of the theory in case of singularities. The last chapter gives the mathematical justification for the methods developed in the previous chapters and investigates important questions such as error estimations for the solutions and asymptotic stability. Each chapter ends with useful comments and an extensive reference to the original literature. (HJ) [de

Multivariate methods in nuclear waste remediation: Needs and applications

International Nuclear Information System (INIS)

Pulsipher, B.A.

1992-05-01

The United States Department of Energy (DOE) has developed a strategy for nuclear waste remediation and environmental restoration at several major sites across the country. Nuclear and hazardous wastes are found in underground storage tanks, containment drums, soils, and facilities. Due to the many possible contaminants and complexities of sampling and analysis, multivariate methods are directly applicable. However, effective application of multivariate methods will require greater ability to communicate methods and results to a non-statistician community. Moreover, more flexible multivariate methods may be required to accommodate inherent sampling and analysis limitations. This paper outlines multivariate applications in the context of select DOE environmental restoration activities and identifies several perceived needs

Applications of the Monte Carlo method in radiation protection

International Nuclear Information System (INIS)

Kulkarni, R.N.; Prasad, M.A.

1999-01-01

This paper gives a brief introduction to the application of the Monte Carlo method in radiation protection. It may be noted that an exhaustive review has not been attempted. The special advantage of the Monte Carlo method has been first brought out. The fundamentals of the Monte Carlo method have next been explained in brief, with special reference to two applications in radiation protection. Some sample current applications have been reported in the end in brief as examples. They are, medical radiation physics, microdosimetry, calculations of thermoluminescence intensity and probabilistic safety analysis. The limitations of the Monte Carlo method have also been mentioned in passing. (author)

Applications of mixed-methods methodology in clinical pharmacy research.

Science.gov (United States)

Hadi, Muhammad Abdul; Closs, S José

2016-06-01

Introduction Mixed-methods methodology, as the name suggests refers to mixing of elements of both qualitative and quantitative methodologies in a single study. In the past decade, mixed-methods methodology has gained popularity among healthcare researchers as it promises to bring together the strengths of both qualitative and quantitative approaches. Methodology A number of mixed-methods designs are available in the literature and the four most commonly used designs in healthcare research are: the convergent parallel design, the embedded design, the exploratory design, and the explanatory design. Each has its own unique advantages, challenges and procedures and selection of a particular design should be guided by the research question. Guidance on designing, conducting and reporting mixed-methods research is available in the literature, so it is advisable to adhere to this to ensure methodological rigour. When to use it is best suited when the research questions require: triangulating findings from different methodologies to explain a single phenomenon; clarifying the results of one method using another method; informing the design of one method based on the findings of another method, development of a scale/questionnaire and answering different research questions within a single study. Two case studies have been presented to illustrate possible applications of mixed-methods methodology. Limitations Possessing the necessary knowledge and skills to undertake qualitative and quantitative data collection, analysis, interpretation and integration remains the biggest challenge for researchers conducting mixed-methods studies. Sequential study designs are often time consuming, being in two (or more) phases whereas concurrent study designs may require more than one data collector to collect both qualitative and quantitative data at the same time.

40Ar-39Ar method for age estimation: principles, technique and application in orogenic regions

International Nuclear Information System (INIS)

Dalmejer, R.

1984-01-01

A variety of the K-Ar method for age estimation by 40 Ar/ 39 Ar recently developed is described. This method doesn't require direct analysis of potassium, its content is calculated as a function of 39 Ar, which is formed from 39 K under neutron activation. Errors resulted from interactions between potassium and calcium nuclei with neutrons are considered. The attention is paid to the technique of gradual heating, used in 40 Ar- 39 Ar method, and of obtaining age spectrum. Aplicabilities of isochronous diagram is discussed for the case of presence of excessive argon in a sample. Examples of 40 Ar- 39 Ar method application for dating events in orogenic regions are presented

What is the method in applying formal methods to PLC applications?

NARCIS (Netherlands)

Mader, Angelika H.; Engel, S.; Wupper, Hanno; Kowalewski, S.; Zaytoon, J.

2000-01-01

The question we investigate is how to obtain PLC applications with confidence in their proper functioning. Especially, we are interested in the contribution that formal methods can provide for their development. Our maxim is that the place of a particular formal method in the total picture of system

Sensitivity analysis methods and a biosphere test case implemented in EIKOS

Energy Technology Data Exchange (ETDEWEB)

Ekstroem, P.A.; Broed, R. [Facilia AB, Stockholm, (Sweden)

2006-05-15

Computer-based models can be used to approximate real life processes. These models are usually based on mathematical equations, which are dependent on several variables. The predictive capability of models is therefore limited by the uncertainty in the value of these. Sensitivity analysis is used to apportion the relative importance each uncertain input parameter has on the output variation. Sensitivity analysis is therefore an essential tool in simulation modelling and for performing risk assessments. Simple sensitivity analysis techniques based on fitting the output to a linear equation are often used, for example correlation or linear regression coefficients. These methods work well for linear models, but for non-linear models their sensitivity estimations are not accurate. Usually models of complex natural systems are non-linear. Within the scope of this work, various sensitivity analysis methods, which can cope with linear, non-linear, as well as non-monotone problems, have been implemented, in a software package, EIKOS, written in Matlab language. The following sensitivity analysis methods are supported by EIKOS: Pearson product moment correlation coefficient (CC), Spearman Rank Correlation Coefficient (RCC), Partial (Rank) Correlation Coefficients (PCC), Standardized (Rank) Regression Coefficients (SRC), Sobol' method, Jansen's alternative, Extended Fourier Amplitude Sensitivity Test (EFAST) as well as the classical FAST method and the Smirnov and the Cramer-von Mises tests. A graphical user interface has also been developed, from which the user easily can load or call the model and perform a sensitivity analysis as well as uncertainty analysis. The implemented sensitivity analysis methods has been benchmarked with well-known test functions and compared with other sensitivity analysis software, with successful results. An illustration of the applicability of EIKOS is added to the report. The test case used is a landscape model consisting of several

Sensitivity analysis methods and a biosphere test case implemented in EIKOS

International Nuclear Information System (INIS)

Ekstroem, P.A.; Broed, R.

2006-05-01

Computer-based models can be used to approximate real life processes. These models are usually based on mathematical equations, which are dependent on several variables. The predictive capability of models is therefore limited by the uncertainty in the value of these. Sensitivity analysis is used to apportion the relative importance each uncertain input parameter has on the output variation. Sensitivity analysis is therefore an essential tool in simulation modelling and for performing risk assessments. Simple sensitivity analysis techniques based on fitting the output to a linear equation are often used, for example correlation or linear regression coefficients. These methods work well for linear models, but for non-linear models their sensitivity estimations are not accurate. Usually models of complex natural systems are non-linear. Within the scope of this work, various sensitivity analysis methods, which can cope with linear, non-linear, as well as non-monotone problems, have been implemented, in a software package, EIKOS, written in Matlab language. The following sensitivity analysis methods are supported by EIKOS: Pearson product moment correlation coefficient (CC), Spearman Rank Correlation Coefficient (RCC), Partial (Rank) Correlation Coefficients (PCC), Standardized (Rank) Regression Coefficients (SRC), Sobol' method, Jansen's alternative, Extended Fourier Amplitude Sensitivity Test (EFAST) as well as the classical FAST method and the Smirnov and the Cramer-von Mises tests. A graphical user interface has also been developed, from which the user easily can load or call the model and perform a sensitivity analysis as well as uncertainty analysis. The implemented sensitivity analysis methods has been benchmarked with well-known test functions and compared with other sensitivity analysis software, with successful results. An illustration of the applicability of EIKOS is added to the report. The test case used is a landscape model consisting of several linked

Using Case-Mix Adjustment Methods To Measure the Effectiveness of Substance Abuse Treatment: Three Examples Using Client Employment Outcomes.

Science.gov (United States)

Koenig, Lane; Fields, Errol L.; Dall, Timothy M.; Ameen, Ansari Z.; Harwood, Henrick J.

This report demonstrates three applications of case-mix methods using regression analysis. The results are used to assess the relative effectiveness of substance abuse treatment providers. The report also examines the ability of providers to improve client employment outcomes, an outcome domain relatively unexamined in the assessment of provider…

Analysis of Formal Methods for Specification of E-Commerce Applications

Directory of Open Access Journals (Sweden)

Sadiq Ali Khan

2016-01-01

Full Text Available E-commerce based application characteristics portray elevated dynamics while incorporating decentralized nature. Extreme emphasis influencing structural design plus implementation, positions such applications highly appreciated. Significant research articles reveal that, applying formal methods addressing challenges incumbent with E-commerce based applications, contribute towards reliability and robustness obliging the system. Anticipating and designing sturdy e-process and concurrent implementation, allows application behavior extra strength against errors, frauds and hacking, minimizing program faults during application operations. Programmers find extreme difficulty guaranteeing correct processing under all circumstances, however, not impossible. Concealed flaws and errors, triggered only under unexpected and unanticipated scenarios, pilot subtle mistakes and appalling failures. Code authors utilize various formal methods for reducing these flaws. Mentioning prominent methods would include, ASM (Abstract State Machines, B-Method, z-Language, UML (Unified Modelling Language etc. This paper primarily focuses different formal methods applied while deliberating specification and verification techniques for cost effective.

Application of the method of continued fractions for electron scattering by linear molecules

International Nuclear Information System (INIS)

Lee, M.-T.; Iga, I.; Fujimoto, M.M.; Lara, O.; Brasilia Univ., DF

1995-01-01

The method of continued fractions (MCF) of Horacek and Sasakawa is adapted for the first time to study low-energy electron scattering by linear molecules. Particularly, we have calculated the reactance K-matrices for an electron scattered by hydrogen molecule and hydrogen molecular ion as well as by a polar LiH molecule in the static-exchange level. For all the applications studied herein. the calculated physical quantities converge rapidly, even for a strongly polar molecule such as LiH, to the correct values and in most cases the convergence is monotonic. Our study suggests that the MCF could be an efficient method for studying electron-molecule scattering and also photoionization of molecules. (Author)

Applicability of the mα-tangent Method to Estimate Plastic Limit Loads of Elbows and Branch Junctions

Energy Technology Data Exchange (ETDEWEB)

Gim, Jae-Min; Kim, Sang-Hyun; Bae, Kyung-Dong; Kim, Yun-Jae [Korea Univ., Seoul (Korea, Republic of); Kim, Jong-Sung [Sejong Univ., Seoul (Korea, Republic of)

2017-06-15

In this study, the limit loads calculated by the mα-tangent method based on the linear finite element analysis are compared with the closed form solutions that are proposed by various authors. The objects of the analysis is to select the elbow and the branch pipe which are representative structure of piping system. The applicability of the mα-tangent method are investigated by applying it to cases with various geometries. The internal pressure and the in-plane bending moment are considered and the mα-tangent method is in good agreement with the existing solutions in case of elbows. However, the limit loads calculated by the mα-tangent method for branch junctions do not agree well with the existing solutions and do not show any tendency. The reason is a biased result due to the stress concentration of the discontinuous parts.

Application of Electrical Resistivity Method (ERM) in Groundwater Exploration

Science.gov (United States)

Izzaty Riwayat, Akhtar; Nazri, Mohd Ariff Ahmad; Hazreek Zainal Abidin, Mohd

2018-04-01

The geophysical method which dominant by geophysicists become one of most popular method applied by engineers in civil engineering fields. Electrical Resistivity Method (ERM) is one of geophysical tool that offer very attractive technique for subsurface profile characterization in larger area. Applicable alternative technique in groundwater exploration such as ERM which complement with existing conventional method may produce comprehensive and convincing output thus effective in terms of cost, time, data coverage and sustainable. ERM has been applied by various application in groundwater exploration. Over the years, conventional method such as excavation and test boring are the tools used to obtain information of earth layer especially during site investigation. There are several problems regarding the application of conventional technique as it only provides information at actual drilling point only. This review paper was carried out to expose the application of ERM in groundwater exploration. Results from ERM could be additional information to respective expert for their problem solving such as the information on groundwater pollution, leachate, underground and source of water supply.

Cost-Effectiveness Analysis of Three Leprosy Case Detection Methods in Northern Nigeria

Science.gov (United States)

Ezenduka, Charles; Post, Erik; John, Steven; Suraj, Abdulkarim; Namadi, Abdulahi; Onwujekwe, Obinna

2012-01-01

Background Despite several leprosy control measures in Nigeria, child proportion and disability grade 2 cases remain high while new cases have not significantly reduced, suggesting continuous spread of the disease. Hence, there is the need to review detection methods to enhance identification of early cases for effective control and prevention of permanent disability. This study evaluated the cost-effectiveness of three leprosy case detection methods in Northern Nigeria to identify the most cost-effective approach for detection of leprosy. Methods A cross-sectional study was carried out to evaluate the additional benefits of using several case detection methods in addition to routine practice in two north-eastern states of Nigeria. Primary and secondary data were collected from routine practice records and the Nigerian Tuberculosis and Leprosy Control Programme of 2009. The methods evaluated were Rapid Village Survey (RVS), Household Contact Examination (HCE) and Traditional Healers incentive method (TH). Effectiveness was measured as number of new leprosy cases detected and cost-effectiveness was expressed as cost per case detected. Costs were measured from both providers' and patients' perspectives. Additional costs and effects of each method were estimated by comparing each method against routine practise and expressed as incremental cost-effectiveness ratio (ICER). All costs were converted to the U.S. dollar at the 2010 exchange rate. Univariate sensitivity analysis was used to evaluate uncertainties around the ICER. Results The ICER for HCE was $142 per additional case detected at all contact levels and it was the most cost-effective method. At ICER of $194 per additional case detected, THs method detected more cases at a lower cost than the RVS, which was not cost-effective at $313 per additional case detected. Sensitivity analysis showed that varying the proportion of shared costs and subsistent wage for valuing unpaid time did not significantly change the

Ethical case deliberation on the ward. A comparison of four methods.

NARCIS (Netherlands)

Steinkamp, N.L.; Gordijn, B.

2003-01-01

The objective of this article is to analyse and compare four methods of ethical case deliberation. These include Clinical Pragmatism, The Nijmegen Method of ethical case deliberation, Hermeneutic dialogue, and Socratic dialogue. The origin of each method will be briefly sketched. Furthermore, the

Minimum weight protection - Gradient method; Protection de poids minimum - Methode du gradient

Energy Technology Data Exchange (ETDEWEB)

Danon, R.

1958-12-15

After having recalled that, when considering a mobile installation, total weight has a crucial importance, and that, in the case of a nuclear reactor, a non neglectable part of weight is that of protection, this note presents an iterative method which results, for a given protection, to a configuration with a minimum weight. After a description of the problem, the author presents the theoretical formulation of the gradient method as it is applied to the concerned case. This application is then discussed, as well as its validity in terms of convergence and uniqueness. Its actual application is then reported, and possibilities of practical applications are evoked.

The use of gravity methods in the internal characterization of landfills—a case study

International Nuclear Information System (INIS)

Mantlík, František; Matias, Manuel; Grangeia, Carlos; Tareco, Hélder; Lourenço, Jose

2009-01-01

Some examples of the use of gravity exploration methods in landfills were published recently. However, density contrast between the landfill and the host media as well as the cost involved may be limiting factors to the application of gravimetry to this problem. Herein a case study of the application of gravity methods to the internal characterization of a sealed landfill is presented. This landfill is installed in recent low-density quaternary sand formations. Two north–south gravity profiles were carried out. The first profile crossed the landfill at its centre, whilst a second profile was done some distance away from the landfill to provide general regional information. The first profile was modelled in order to obtain lateral variations of density within the landfill that might be caused by different types of waste and/or the age of the waste deposits. Gravity modelling and interpretation were supported with data from resistivity profiles carried out in the immediate vicinity of the gravity measurements, i.e. the resistivity profiles interpretation results constrained the thickness of landfill deposits

Evaluation of the clinical process in a critical care information system using the Lean method: a case study

Directory of Open Access Journals (Sweden)

Yusof Maryati Mohd

2012-12-01

Full Text Available Abstract Background There are numerous applications for Health Information Systems (HIS that support specific tasks in the clinical workflow. The Lean method has been used increasingly to optimize clinical workflows, by removing waste and shortening the delivery cycle time. There are a limited number of studies on Lean applications related to HIS. Therefore, we applied the Lean method to evaluate the clinical processes related to HIS, in order to evaluate its efficiency in removing waste and optimizing the process flow. This paper presents the evaluation findings of these clinical processes, with regards to a critical care information system (CCIS, known as IntelliVue Clinical Information Portfolio (ICIP, and recommends solutions to the problems that were identified during the study. Methods We conducted a case study under actual clinical settings, to investigate how the Lean method can be used to improve the clinical process. We used observations, interviews, and document analysis, to achieve our stated goal. We also applied two tools from the Lean methodology, namely the Value Stream Mapping and the A3 problem-solving tools. We used eVSM software to plot the Value Stream Map and A3 reports. Results We identified a number of problems related to inefficiency and waste in the clinical process, and proposed an improved process model. Conclusions The case study findings show that the Value Stream Mapping and the A3 reports can be used as tools to identify waste and integrate the process steps more efficiently. We also proposed a standardized and improved clinical process model and suggested an integrated information system that combines database and software applications to reduce waste and data redundancy.

Setting health research priorities using the CHNRI method: VII. A review of the first 50 applications of the CHNRI method.

Science.gov (United States)

Rudan, Igor; Yoshida, Sachiyo; Chan, Kit Yee; Sridhar, Devi; Wazny, Kerri; Nair, Harish; Sheikh, Aziz; Tomlinson, Mark; Lawn, Joy E; Bhutta, Zulfiqar A; Bahl, Rajiv; Chopra, Mickey; Campbell, Harry; El Arifeen, Shams; Black, Robert E; Cousens, Simon

2017-06-01

Several recent reviews of the methods used to set research priorities have identified the CHNRI method (acronym derived from the "Child Health and Nutrition Research Initiative") as an approach that clearly became popular and widely used over the past decade. In this paper we review the first 50 examples of application of the CHNRI method, published between 2007 and 2016, and summarize the most important messages that emerged from those experiences. We conducted a literature review to identify the first 50 examples of application of the CHNRI method in chronological order. We searched Google Scholar, PubMed and so-called grey literature. Initially, between 2007 and 2011, the CHNRI method was mainly used for setting research priorities to address global child health issues, although the first cases of application outside this field (eg, mental health, disabilities and zoonoses) were also recorded. Since 2012 the CHNRI method was used more widely, expanding into the topics such as adolescent health, dementia, national health policy and education. The majority of the exercises were focused on issues that were only relevant to low- and middle-income countries, and national-level applications are on the rise. The first CHNRI-based articles adhered to the five recommended priority-setting criteria, but by 2016 more than two-thirds of all conducted exercises departed from recommendations, modifying the CHNRI method to suit each particular exercise. This was done not only by changing the number of criteria used, but also by introducing some entirely new criteria (eg, "low cost", "sustainability", "acceptability", "feasibility", "relevance" and others). The popularity of the CHNRI method in setting health research priorities can be attributed to several key conceptual advances that have addressed common concerns. The method is systematic in nature, offering an acceptable framework for handling many research questions. It is also transparent and replicable, because it

76 FR 71341 - BASINS and WEPP Climate Assessment Tools: Case Study Guide to Potential Applications

Science.gov (United States)

2011-11-17

... Climate Assessment Tools: Case Study Guide to Potential Applications AGENCY: Environmental Protection... Tools (CAT): Case Study Guide to Potential Applications (EPA/600/R-11/123A). EPA also is announcing that... report presents a series of short case studies designed to illustrate the capabilities of these tools for...

Studies on the methods of inorganic nutrient application in coconut

International Nuclear Information System (INIS)

Dwivedi, R.S.; Ray, P.K.; Ninan, S.

1981-01-01

Using carrier free 32 P, tagged single superphosphate and 86 Rb, the efficiency of different methods of plant injection and soil placement techniques for fertilizer applications was examined. In the plant injection techniques the radioactivity was fed to the palms through growing roots tips, cut ends of roots, stem injection and leaf axils. The application of radioactivity through the cut ends of roots was most efficient since 32 P was detected in 10 m tall palms, four hours after application. In stem, leaf axil and growing roots tips injection the 32 P was detected after 8, 12 and 18 h. Out of four methods of soil application, the quickest recovery of 32 P in the palms was detected after 7 days of placement when applied by the hole method. The 32 P activity in the palms through circular trenches, strips and basin methods was recorded after 8, 8 and 11 days of application respectively. The accumulation of 86 Rb was significantly higher than 32 P. With plant injection technique the accumulation of activity was found to be significantly higher than with soil placement methods. The rate of radioactivity absorption was 10 to 60 time faster in the former technique as compared to that of the latter. The application of radioactivity through cut ends of roots and circular trench methods, were found to be better and may recommended for nutrient application in coconut. (orig.)

Finite Element Methods and Their Applications

CERN Document Server

Chen, Zhangxin

2005-01-01

This book serves as a text for one- or two-semester courses for upper-level undergraduates and beginning graduate students and as a professional reference for people who want to solve partial differential equations (PDEs) using finite element methods. The author has attempted to introduce every concept in the simplest possible setting and maintain a level of treatment that is as rigorous as possible without being unnecessarily abstract. Quite a lot of attention is given to discontinuous finite elements, characteristic finite elements, and to the applications in fluid and solid mechanics including applications to porous media flow, and applications to semiconductor modeling. An extensive set of exercises and references in each chapter are provided.

A practical model-based statistical approach for generating functional test cases: application in the automotive industry

OpenAIRE

Awédikian , Roy; Yannou , Bernard

2012-01-01

International audience; With the growing complexity of industrial software applications, industrials are looking for efficient and practical methods to validate the software. This paper develops a model-based statistical testing approach that automatically generates online and offline test cases for embedded software. It discusses an integrated framework that combines solutions for three major software testing research questions: (i) how to select test inputs; (ii) how to predict the expected...

Modern methods of thyroid diagnosis

Energy Technology Data Exchange (ETDEWEB)

Hehrmann, R

1980-11-01

An attempt is made to provide a systematic general view at the diagnostical methods and facilities which nowadays are applied in the case of thyroid diseases. The reasonable and accurate application of the various methods possible is of decisive importance for the thyroid diagnostics. This planned application requires exact knowledge of the case history and of the findings as well as knowledge of the preconditions, the advantages and disadvantages of and the possible errors in the methods applied. Proposals and guiding lines for a planned step-by-step application of methods of diagnosing thyroid diseases were published by the Section Thyroid Society for Endocrinology in Wiesbaden in December 1978. For step-by-step diagnostics of thyroid diseaeses, these publications may be of help.

Prony's method application for BWR instabilities characterization

Energy Technology Data Exchange (ETDEWEB)

Castillo, Rogelio, E-mail: rogelio.castillo@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico); Ramírez, J. Ramón, E-mail: ramon.ramirez@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico); Alonso, Gustavo, E-mail: gustavo.alonso@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico); Instituto Politecnico Nacional, Unidad Profesional Adolfo Lopez Mateos, Ed. 9, Lindavista, D.F. 07300 (Mexico); Ortiz-Villafuerte, Javier, E-mail: javier.ortiz@inin.gob.mx [Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca s/n, La Marquesa, Ocoyoacac, Estado de México 52750 (Mexico)

2015-04-01

Highlights: • Prony's method application for BWR instability events. • Several BWR instability benchmark are assessed using this method. • DR and frequency are obtained and a new parameter is proposed to eliminate false signals. • Adequate characterization of in-phase and out-of-phase events is obtained. • The Prony's method application is validated. - Abstract: Several methods have been developed for the analysis of reactor power signals during BWR power oscillations. Among them is the Prony's method, its application provides the DR and the frequency of oscillations. In this paper another characteristic of the method is proposed to determine the type of oscillations that can occur, in-phase or out-of-phase. Prony's method decomposes a given signal in all the frequencies that it contains, therefore the DR of the fundamental mode and the first harmonic are obtained. To determine the more dominant pole of the system a normalized amplitude W of the system is calculated, which depends on the amplitude and the damping coefficient. With this term, it can be analyzed which type of oscillations is present, if W of the fundamental mode frequency is the greater, the type of oscillations is in-phase, if W of the first harmonic frequency is the greater, the type of oscillations is out-of-phase. The method is applied to several stability benchmarks to assess its validity. Results show the applicability of the method as an alternative analysis method to determine the type of oscillations occurred.

Prony's method application for BWR instabilities characterization

International Nuclear Information System (INIS)

Castillo, Rogelio; Ramírez, J. Ramón; Alonso, Gustavo; Ortiz-Villafuerte, Javier

2015-01-01

Highlights: • Prony's method application for BWR instability events. • Several BWR instability benchmark are assessed using this method. • DR and frequency are obtained and a new parameter is proposed to eliminate false signals. • Adequate characterization of in-phase and out-of-phase events is obtained. • The Prony's method application is validated. - Abstract: Several methods have been developed for the analysis of reactor power signals during BWR power oscillations. Among them is the Prony's method, its application provides the DR and the frequency of oscillations. In this paper another characteristic of the method is proposed to determine the type of oscillations that can occur, in-phase or out-of-phase. Prony's method decomposes a given signal in all the frequencies that it contains, therefore the DR of the fundamental mode and the first harmonic are obtained. To determine the more dominant pole of the system a normalized amplitude W of the system is calculated, which depends on the amplitude and the damping coefficient. With this term, it can be analyzed which type of oscillations is present, if W of the fundamental mode frequency is the greater, the type of oscillations is in-phase, if W of the first harmonic frequency is the greater, the type of oscillations is out-of-phase. The method is applied to several stability benchmarks to assess its validity. Results show the applicability of the method as an alternative analysis method to determine the type of oscillations occurred

Estimation and Control in Agile Methods for Software Development: a Case Study

Directory of Open Access Journals (Sweden)

Mitre-Hernández Hugo A.

2014-07-01

Full Text Available The development of software (SW using agile methods is growing due to the productivity associated with these methodologies, in addition to the flexibility shown in small teams. However, these methods have clear weaknesses of software development in cost estimation and management, as well as the fact that project managers do not have enough evidence to verify the budget spending on a project due to the poor documentation generated and the lack of monitoring of resource spending. A proposal estimation and cost control in agile methods to solve these shortcomings. To this end, a case study was conducted in an agile software development company using the proposal for Software as a Service (SaaS and Web application projects. The results found were that the proposal generates a high degree of evidence for project managers, but it has shortcomings in the administration of the evidence for the control and decision making, which led to a definition of a decision making process to be coupled with the measurement proposal.

Endodontic applications of cone beam computed tomography: case series and literature review

Directory of Open Access Journals (Sweden)

Francesc Abella

2015-11-01

Full Text Available Cone beam computed tomography (CBCT is a relatively new method that produces three-dimensional (3D information of the maxillofacial skeleton, including the teeth and their surrounding tissue, with a lower effective radiation dose than traditional CT scans. Specific endodontic applications for CBCT are being identified as the use of this technology becomes more common. CBCT has great potential to become a valuable tool for diagnosing and managing endodontic problems, as well as for assessing root fractures, apical periodontitis, resorptions, perforations, root canal anatomy and the nature of the alveolar bone topography around teeth. This article aims to review cone beam technology and its advantages over CT scans and conventional radiography, to illustrate current and future clinical applications in endodontic practice, and to highlight areas of further research of CBCT in endodontics. Specific case examples illustrate how treatment planning has changed with the images obtained with CBCT technology compared with only periapical radiography.

26 CFR 1.471-10 - Applicability of long-term contract methods.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 6 2010-04-01 2010-04-01 false Applicability of long-term contract methods. 1... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Inventories § 1.471-10 Applicability of long-term contract methods. See § 1.460-2 for rules providing for the application of the long-term contract methods to...

Dual worth trade-off method and its application for solving multiple criteria decision making problems

Institute of Scientific and Technical Information of China (English)

Feng Junwen

2006-01-01

To overcome the limitations of the traditional surrogate worth trade-off (SWT) method and solve the multiple criteria decision making problem more efficiently and interactively, a new method labeled dual worth trade-off (DWT) method is proposed. The DWT method dynamically uses the duality theory related to the multiple criteria decision making problem and analytic hierarchy process technique to obtain the decision maker's solution preference information and finally find the satisfactory compromise solution of the decision maker. Through the interactive process between the analyst and the decision maker, trade-off information is solicited and treated properly, the representative subset of efficient solutions and the satisfactory solution to the problem are found. The implementation procedure for the DWT method is presented. The effectiveness and applicability of the DWT method are shown by a practical case study in the field of production scheduling.

Development and application of a biorelevant dissolution method using USP apparatus 4 in early phase formulation development.

Science.gov (United States)

Fang, Jiang B; Robertson, Vivian K; Rawat, Archana; Flick, Tawnya; Tang, Zhe J; Cauchon, Nina S; McElvain, James S

2010-10-04

Dissolution testing is frequently used to determine the rate and extent at which a drug is released from a dosage form, and it plays many important roles throughout drug product development. However, the traditional dissolution approach often emphasizes its application in quality control testing and usually strives to obtain 100% drug release. As a result, dissolution methods are not necessarily biorelevant and meaningful application of traditional dissolution methods in the early phases of drug product development can be very limited. This article will describe the development of a biorelevant in vitro dissolution method using USP apparatus 4, biorelevant media, and real-time online UV analysis. Several case studies in the areas of formulation selection, lot-to-lot variability, and food effect will be presented to demonstrate the application of this method in early phase formulation development. This biorelevant dissolution method using USP apparatus 4 provides a valuable tool to predict certain aspects of the in vivo drug release. It can be used to facilitate the formulation development/selection for pharmacokinetic (PK) and clinical studies. It may also potentially be used to minimize the number of PK studies, and to aid in the design of more efficient PK and clinical studies.

Clinical case

International Nuclear Information System (INIS)

Garcia Fontes, M

2012-01-01

This presentation is about a case of a patient with liver tumor. The ultrasound scan and Tc technique were used for the diagnosis and treatment. The application of PET - CT FDG contributed to detect peripheral cholangiocarcinoma, the lymph node distance to guide the therapeutic and the recurrence in case of a negative morphological methods.

Application of the group-theoretical method to physical problems

OpenAIRE

Abd-el-malek, Mina B.

1998-01-01

The concept of the theory of continuous groups of transformations has attracted the attention of applied mathematicians and engineers to solve many physical problems in the engineering sciences. Three applications are presented in this paper. The first one is the problem of time-dependent vertical temperature distribution in a stagnant lake. Two cases have been considered for the forms of the water parameters, namely water density and thermal conductivity. The second application is the unstea...

Application of an analytical method for solution of thermal hydraulic conservation equations

Energy Technology Data Exchange (ETDEWEB)

Fakory, M.R. [Simulation, Systems & Services Technologies Company (S3 Technologies), Columbia, MD (United States)

1995-09-01

An analytical method has been developed and applied for solution of two-phase flow conservation equations. The test results for application of the model for simulation of BWR transients are presented and compared with the results obtained from application of the explicit method for integration of conservation equations. The test results show that with application of the analytical method for integration of conservation equations, the Courant limitation associated with explicit Euler method of integration was eliminated. The results obtained from application of the analytical method (with large time steps) agreed well with the results obtained from application of explicit method of integration (with time steps smaller than the size imposed by Courant limitation). The results demonstrate that application of the analytical approach significantly improves the numerical stability and computational efficiency.

Bayesian non- and semi-parametric methods and applications

CERN Document Server

Rossi, Peter

2014-01-01

This book reviews and develops Bayesian non-parametric and semi-parametric methods for applications in microeconometrics and quantitative marketing. Most econometric models used in microeconomics and marketing applications involve arbitrary distributional assumptions. As more data becomes available, a natural desire to provide methods that relax these assumptions arises. Peter Rossi advocates a Bayesian approach in which specific distributional assumptions are replaced with more flexible distributions based on mixtures of normals. The Bayesian approach can use either a large but fixed number

Application of orthodontic forces prior to autotransplantation - case reports.

Science.gov (United States)

Cho, J-H; Hwang, H-S; Chang, H-S; Hwang, Y-C

2013-02-01

This case report describes the successful autotransplantation of mandibular molars after application of orthodontic forces and discusses the advantages of this technique, that is, pre-application of an orthodontic force for autotransplantation. After clinical and radiographic examination, autotransplantation was planned with the patient's written informed consent. An orthodontic force was applied, and the surgical procedure was performed after tooth mobility had increased. Root canal treatment was performed within 2 weeks of autotransplantation. At the 1-year follow-up, the transplanted teeth revealed asymptomatic and healthy periodontal conditions. Autotransplantation is the surgical movement of a tooth from its original location to another site. The pre-application of orthodontic force technique was recently introduced for autogenous tooth transplantation. Pre-application of an orthodontic force may be a useful treatment option for autotransplantation. © 2012 International Endodontic Journal.

Effects of application methods and species of wood on color ...

African Journals Online (AJOL)

PRECIOUS

2009-11-02

Nov 2, 2009 ... methods. Key words: Waterborne varnishes, application methods, wood materials, color change. ... rate in open air conditions (Anderson et al., 1991). .... for topcoat application and they were held for drying for 3 weeks. Finally ...

Structural equation modeling methods and applications

CERN Document Server

Wang, Jichuan

2012-01-01

A reference guide for applications of SEM using Mplus Structural Equation Modeling: Applications Using Mplus is intended as both a teaching resource and a reference guide. Written in non-mathematical terms, this book focuses on the conceptual and practical aspects of Structural Equation Modeling (SEM). Basic concepts and examples of various SEM models are demonstrated along with recently developed advanced methods, such as mixture modeling and model-based power analysis and sample size estimate for SEM. The statistical modeling program, Mplus, is also featured and provides researchers with a

The GSC method for constructing the entropy solution of hyperbolic conservation laws and applications

International Nuclear Information System (INIS)

Werner, K.D.

1990-01-01

In this paper we introduce briefly the Geometrical Shock Correction (GSC) method and consider various fields of applications, with special emphasis on two-phase flow problems in porous media. Some test problems are taken from this field. GSC is a very efficient numerical method for constructing the entropy solution of the Cauchy problem of scalar hyperboli conservation laws (with source term) in one space dimension and in specific two-dimensional cases. The novelty consists in constructing the solution at an arbitrary fixed time t=T>0 in one time step, based on transporting the initial values along characteristics and, if shocks appear, on a correction of the multivalued relation by a geometrical averaging technique. (orig.) With 7 figs [de

Design method of large-diameter rock-socketed pile with steel casing

Science.gov (United States)

Liu, Ming-wei; Fang, Fang; Liang, Yue

2018-02-01

There is a lack of the design and calculation method of large-diameter rock-socketed pile with steel casing. Combined with the “twelfth five-year plan” of the National Science & Technology Pillar Program of China about “Key technologies on the ports and wharfs constructions of the mountain canalization channels”, this paper put forward the structured design requirements of concrete, steel bar distribution and steel casing, and a checking calculation method of the bearing capacity of the normal section of the pile and the maximum crack width at the bottom of the steel casing. The design method will have some degree of guiding significance for the design of large-diameter rock-socketed pile with steel casing.

Study on the scope of fault tree method applicability

International Nuclear Information System (INIS)

Ito, Taiju

1980-03-01

In fault tree analysis of the reliability of nuclear safety system, including reliability analysis of nuclear protection system, there seem to be some documents in which application of the fault tree method is unreasonable. In fault tree method, the addition rule and the multiplication rule are usually used. The addition rule and the multiplication rule must hold exactly or at least practically. The addition rule has no problem but the multiplication rule has occasionally some problem. For unreliability, mean unavailability and instantaneous unavailability of the elements, holding or not of the multiplication rule has been studied comprehensively. Between the unreliability of each element without maintenance, the multiplication rule holds. Between the instantaneous unavailability of each element, with maintenance or not, the multiplication rule also holds. Between the unreliability of each subsystem with maintenance, however, the multiplication rule does not hold, because the product value is larger than the value of unreliability for a parallel system consisting of the two subsystems with maintenance. Between the mean unavailability of each element without maintenance, the multiplication rule also does not hold, because the product value is smaller than the value of mean unavailability for a parallel system consisting of the two elements without maintenance. In these cases, therefore, the fault tree method may not be applied by rote for reliability analysis of the system. (author)

Pseudopotencial method of Waeber and Stoll; application to the lithium case

International Nuclear Information System (INIS)

Oliveira Miguel, S.

1975-01-01

A study and a program for digital computer, using the method of energy bands calculation proposed by Waeber and Stoll in 1972, is made. Such method is based upon the solution of a similar transformed Schroedinger equation, whose solution, lay in a restrict sub-space of Hilbert space. The solution of the transformed equation needs fewer basis function than the other methods to expand the trial wave function. This fact requires the diagonalization of a small order matrix and consequently less machine time is used. For the testing of the method and the program, the energy bands of lithium were evaluated with good results [pt

Application of blended learning in teaching statistical methods

Directory of Open Access Journals (Sweden)

Barbara Dębska

2012-12-01

Full Text Available The paper presents the application of a hybrid method (blended learning - linking traditional education with on-line education to teach selected problems of mathematical statistics. This includes the teaching of the application of mathematical statistics to evaluate laboratory experimental results. An on-line statistics course was developed to form an integral part of the module ‘methods of statistical evaluation of experimental results’. The course complies with the principles outlined in the Polish National Framework of Qualifications with respect to the scope of knowledge, skills and competencies that students should have acquired at course completion. The paper presents the structure of the course and the educational content provided through multimedia lessons made accessible on the Moodle platform. Following courses which used the traditional method of teaching and courses which used the hybrid method of teaching, students test results were compared and discussed to evaluate the effectiveness of the hybrid method of teaching when compared to the effectiveness of the traditional method of teaching.

Application of CFD methods in research of SCWR thermo-hydraulics

International Nuclear Information System (INIS)

Zeng Xiaokang; Li Yongliang; Yan Xiao; Xiao Zejun; Huang Yanping

2013-01-01

The CFD method has been an important tool in the research of SCWR thermo- hydraulics. Currently, the CFD methods uses commonly the subcritical turbulence models, which can not accurately simulate the gravity and thermal expansion acceleration effect, and CFD numerical method is not applicable when the heat flux is large. The paper summarizes the application status of the CFD methods in the research of SCWR thermo-hydraulics in RETH. (authors)

Relational Constraint Driven Test Case Synthesis for Web Applications

Directory of Open Access Journals (Sweden)

Xiang Fu

2010-09-01

Full Text Available This paper proposes a relational constraint driven technique that synthesizes test cases automatically for web applications. Using a static analysis, servlets can be modeled as relational transducers, which manipulate backend databases. We present a synthesis algorithm that generates a sequence of HTTP requests for simulating a user session. The algorithm relies on backward symbolic image computation for reaching a certain database state, given a code coverage objective. With a slight adaptation, the technique can be used for discovering workflow attacks on web applications.

Modelling migration in multilayer systems by a finite difference method: the spherical symmetry case

International Nuclear Information System (INIS)

Hojbota, C I; Toşa, V; Mercea, P V

2013-01-01

We present a numerical model based on finite differences to solve the problem of chemical impurity migration within a multilayer spherical system. Migration here means diffusion of chemical species in conditions of concentration partitioning at layer interfaces due to different solubilities of the migrant in different layers. We detail here the numerical model and discuss the results of its implementation. To validate the method we compare it with cases where an analytic solution exists. We also present an application of our model to a practical problem in which we compute the migration of caprolactam from the packaging multilayer foil into the food

Using CASE-tools based on formal methods in real-life system development of distributed systems

International Nuclear Information System (INIS)

Stoelen, Ketil; Karlsen, Tore Willy; Mohn, Peter; Sandmark, Haaakon

1998-03-01

Within the OECD Halden Reactor Project (HRP) the development and application of formal methods to enhance system quality have been prioritised tasks for the last three years per periods. The three year programme 1997-1999 identifies the need to gain experience from applying formal methods in larger real-life system developments. This motivated the initiation of the HRP research activity Integration of Formal Specification in the Development of HAMMLAB 2000 (INT-FS). The principal objective of INT-FS is to experiment with formal methods in system developments connected to HAMMLAB 2000 and thereby gain a better understanding of their suitability to support practical software engineering. In particular, INT-FS will try to measure the effect of formal methods and gain experience in combining formal methods with traditional development techniques. INT-FS was started up in January 1997. This report describes the status of INT-FS by February 1998. The report identifies objectives and plans; it motivates the choice of formal methods, CASE-tool and software process; it motivates and defines metrics for measuring achievement and the effect of formalization. The report also provides preliminary results from an experimental development of a communication manager; it describes the component to be developed and the background of the participants; it offers some provisional statistics and summarises the experiences with methods and tools. The development of the communication manager is the first attempt ever to exploit state-of-the-art CASE-tools for formal methods in practical software engineering at the HRP. (author)

Validation and application of an high-order spectral difference method for flow induced noise simulation

KAUST Repository

Parsani, Matteo

2011-09-01

The main goal of this paper is to develop an efficient numerical algorithm to compute the radiated far field noise provided by an unsteady flow field from bodies in arbitrary motion. The method computes a turbulent flow field in the near fields using a high-order spectral difference method coupled with large-eddy simulation approach. The unsteady equations are solved by advancing in time using a second-order backward difference formulae scheme. The nonlinear algebraic system arising from the time discretization is solved with the nonlinear lowerupper symmetric GaussSeidel algorithm. In the second step, the method calculates the far field sound pressure based on the acoustic source information provided by the first step simulation. The method is based on the Ffowcs WilliamsHawkings approach, which provides noise contributions for monopole, dipole and quadrupole acoustic sources. This paper will focus on the validation and assessment of this hybrid approach using different test cases. The test cases used are: a laminar flow over a two-dimensional (2D) open cavity at Re = 1.5 × 10 3 and M = 0.15 and a laminar flow past a 2D square cylinder at Re = 200 and M = 0.5. In order to show the application of the numerical method in industrial cases and to assess its capability for sound field simulation, a three-dimensional turbulent flow in a muffler at Re = 4.665 × 10 4 and M = 0.05 has been chosen as a third test case. The flow results show good agreement with numerical and experimental reference solutions. Comparison of the computed noise results with those of reference solutions also shows that the numerical approach predicts noise accurately. © 2011 IMACS.

Application of probabilistic methods for sizing of safety factors in studies on defect harm fullness

International Nuclear Information System (INIS)

Ardillon, E.; Pitner, P.

1996-01-01

The design rules that are currently under application in nuclear engineering recommend the use of deterministic analysis methods. Probabilistic methods allow the uncertainties inherent in input variables of the analytical model to be taken into account owing to data provided by operation feedback so as to better evaluate the link between the deterministic margins adopted and the actual risk level. In the Resistance R/Loading L elementary case where the variables are Gaussian, there is an explicit relation between the required safety level and the partial safety coefficients which affect each variable. In the complex case of a flawed pipe subjected to various modes of ruin where many random variables are not Gaussian, one can obtain implicit relations. These relations allow a certain flexibility when choosing the coefficients, which poses the problem of their optimum calibration. The choice of coefficients based upon the coordinates of the ''most probable failure point'' illustrates this approach. (authors). 7 refs., 5 figs., 2 tabs

An application of the AHP in water resources management: a case study on urban drainage rehabilitation in Medan City

Science.gov (United States)

Tarigan, A. P. M.; Rahmad, D.; Sembiring, R. A.; Iskandar, R.

2018-02-01

This paper illustrates an application of Analytical Hierarchy Process (AHP) as a potential decision-making method in water resource management related to drainage rehabilitation. The prioritization problem of urban drainage rehabilitation in Medan City due to limited budget is used as a study case. A hierarchical structure is formed for the prioritization criteria and the alternative drainages to be rehabilitated. Based on the AHP, the prioritization criteria are ranked and a descending-order list of drainage is made in order to select the most favorable drainages to have rehabilitation. A sensitivity analysis is then conducted to check the consistency of the final decisions in case of minor changes in judgements. The results of AHP computed manually are compared with that using the software Expert Choice. It is observed that the top three ranked drainages are consistent, and both results of the AHP methods, calculated manually and performed using Expert Choice, are in agreement. It is hoped that the application of the AHP will help the decision-making process by the city government in the problem of urban drainage rehabilitation.

Application of quasiexactly solvable potential method to the N-body ...

Indian Academy of Sciences (India)

physics pp. 985–996. Application of quasiexactly solvable potential method to the N-body ... Application of QES method to N-particle quantum model interacting via an ... Now, if we choose the centre of mass R as the origin of the coordinates,.

Endoscopic application of n-butyl-2-cyanoacrylate on esophagojejunal anastomotic leak: a case report

Directory of Open Access Journals (Sweden)

Angelopoulos Stamatis

2011-03-01

Full Text Available Abstract Introduction This case report describes an esophagojejunal anastomotic leak following total gastrectomy for gastric cancer. The leak was treated successfully with endoscopic application of n-butyl-2-cyanoacrylate. This is the first case report on the endoscopic application of cyanoacrylate alone for the treatment of an anastomotic leak. Case presentation This report describes a case of a 68-year-old Caucasian man who underwent surgery for gastric cancer. He underwent total gastrectomy and esophagojejunal anastomosis with Roux-en-Y anastomosis plus transverse colectomy. An anastomotic leak was treated conservatively at first for a total of three weeks. However, the leak persisted; therefore, the decision was made to apply topical endoscopic n-butyl-2-cyanoacrylate. Conclusion The endoscopic application of n-butyl-2-cyanoacrylate alone can be used successfully to treat esophagojejunal anastomotic leakage.

Dependency Analysis Guidance. Nordic/German Working Group on Common cause Failure analysis. Phase 1 project report: Comparisons and application to test cases

Energy Technology Data Exchange (ETDEWEB)

Becker, Guenter (RISA Sicherheitsanalysen GmbH (DE)); Jaenkaelae, Kalle (Fortum Nuclear Services Oy (FI)); Johanson, Gunnar; Lindberg, Sandra (ES Konsult, Stockholm (SE)); Knochenhauer, Michael (Relcon Scandpower AB, Stockholm (SE)); Schubert, Bernd (Vattenfall Europe (DE)); Vaurio, Jussi (Prometh Solutions (FI)); Wohlstein, Ralf (E.ON Kernkraft, Maschinentechnik (DE))

2007-10-15

This report is part of the reporting from the European Working Group on CCF analysis (EWG), including members from Finland, Germany and Sweden. The project is planned in two phases with a reporting and progress evaluation before initiation of the second phase. Phase 1: Comparisons and application to test cases (2006). Phase 2: Development of harmonized approach and applications (2007). This report summarizes the work during the 1st phase of the project, which included the following main tasks: Task 1: Survey of databases, Task 2: Survey of methods for classification and quantification of CCF-events and description of these methods. Task 3: Classify events for application, using different approaches as recommended above. Task 4: Draw conclusions for harmonization

Dependency Analysis Guidance. Nordic/German Working Group on Common cause Failure analysis. Phase 1 project report: Comparisons and application to test cases

International Nuclear Information System (INIS)

Becker, Guenter; Jaenkaelae, Kalle; Johanson, Gunnar; Lindberg, Sandra; Knochenhauer, Michael; Sc hubert, Bernd; Vaurio, Jussi; Wohlstei n, Ralf

2007-10-01

This report is part of the reporting from the European Working Group on CCF analysis (EWG), including members from Finland, Germany and Sweden. The project is planned in two phases with a reporting and progress evaluation before initiation of the second phase. Phase 1: Comparisons and application to test cases (2006). Phase 2: Development of harmonized approach and applications (2007). This report summarizes the work during the 1st phase of the project, which included the following main tasks: Task 1: Survey of databases, Task 2: Survey of methods for classification and quantification of CCF-events and description of these methods. Task 3: Classify events for application, using different approaches as recommended above. Task 4: Draw conclusions for harmonization

Application of specific gravity method for normalization of urinary excretion rates of radionuclides

International Nuclear Information System (INIS)

Thakur, Smita S.; Yadav, J.R.; Rao, D.D.

2015-01-01

In vitro bioassay monitoring is based on the determination of activity concentration in biological samples excreted from the body and is most suitable for alpha and beta emitters. For occupational workers handling actinides in reprocessing facilities possibility of internal exposure exists and urine assay is preferred method for monitoring such exposure. Urine samples collected for 24 h duration, is the true representative of bioassay sample and hence in the case of insufficient collection time, specific gravity applied method of normalization of urine sample is used. The present study reports the data of specific gravity generated for controlled group of Indian population by the use of densitometer and its application in urinary sample activity normalization. The average specific gravity value obtained for the controlled group was 1.008±0.005 gm/ml. (author)

77 FR 8865 - Recent Postings of Broadly Applicable Alternative Test Methods

Science.gov (United States)

2012-02-15

... Applicable Alternative Test Methods AGENCY: Environmental Protection Agency (EPA). ACTION: Notice of availability. SUMMARY: This notice announces the broadly applicable alternative test method approval decisions... INFORMATION CONTACT: An electronic copy of each alternative test method approval document is available on the...

Application of NDE methods to green ceramics: initial results

International Nuclear Information System (INIS)

Kupperman, D.S.; Karplus, H.B.; Poeppel, R.B.; Ellingson, W.A.; Berger, H.; Robbins, C.; Fuller, E.

1983-01-01

The effectiveness of microradiography, ultrasonic methods, unclear magnetic resonance, and neutron radiography was assessed for the nondestructive evaluation of green (unfired) ceramics. The application of microradiography to ceramics is reviewed, and preliminary experiments with a commercial microradiography unit are described. Conventional ultrasonic techniques are difficult to apply to flaw detection green ceramics because of the high attenuation, fragility, and couplant-absorbing properties of these materials. However, velocity, attenuation, and spectral data were obtained with pressure-coupled transducers and provided useful informaion related to density variations and the presence of agglomerates. Nuclear magnetic resonance (NMR) imaging techniques and neutron radiography were considered for detection of anomalies in the distribution of porosity. With NMR, areas of high porosity might be detected after the samples are doped with water. In the case of neutron radiography, although imaging the binder distribution throughout the sample may not be feasible because of the low overall concentration of binder, regions of high binder concentration (thus high porosity) should be detectable

Application of cybernetic methods in physics

Energy Technology Data Exchange (ETDEWEB)

Fradkov, Aleksandr L [Institute of Problems of Mechanical Engineering, Russian Academy of Sciences, St.-Petersburg (Russian Federation)

2005-02-28

Basic aspects of the subject and methodology for a new and rapidly developing area of research that has emerged at the intersection of physics and control theory (cybernetics) and emphasizes the application of cybernetic methods to the study of physical systems are reviewed. Speed-gradient and Hamiltonian solutions for energy control problems in conservative and dissipative systems are presented. Application examples such as the Kapitza pendulum, controlled overcoming of a potential barrier, and controlling coupled oscillators and molecular systems are presented. A speed-gradient approach to modeling the dynamics of physical systems is discussed. (reviews of topical problems)

Application of cybernetic methods in physics

International Nuclear Information System (INIS)

Fradkov, Aleksandr L

2005-01-01

Basic aspects of the subject and methodology for a new and rapidly developing area of research that has emerged at the intersection of physics and control theory (cybernetics) and emphasizes the application of cybernetic methods to the study of physical systems are reviewed. Speed-gradient and Hamiltonian solutions for energy control problems in conservative and dissipative systems are presented. Application examples such as the Kapitza pendulum, controlled overcoming of a potential barrier, and controlling coupled oscillators and molecular systems are presented. A speed-gradient approach to modeling the dynamics of physical systems is discussed. (reviews of topical problems)

Computational methods for industrial radiation measurement applications

International Nuclear Information System (INIS)

Gardner, R.P.; Guo, P.; Ao, Q.

1996-01-01

Computational methods have been used with considerable success to complement radiation measurements in solving a wide range of industrial problems. The almost exponential growth of computer capability and applications in the last few years leads to a open-quotes black boxclose quotes mentality for radiation measurement applications. If a black box is defined as any radiation measurement device that is capable of measuring the parameters of interest when a wide range of operating and sample conditions may occur, then the development of computational methods for industrial radiation measurement applications should now be focused on the black box approach and the deduction of properties of interest from the response with acceptable accuracy and reasonable efficiency. Nowadays, increasingly better understanding of radiation physical processes, more accurate and complete fundamental physical data, and more advanced modeling and software/hardware techniques have made it possible to make giant strides in that direction with new ideas implemented with computer software. The Center for Engineering Applications of Radioisotopes (CEAR) at North Carolina State University has been working on a variety of projects in the area of radiation analyzers and gauges for accomplishing this for quite some time, and they are discussed here with emphasis on current accomplishments

[Optimized application of nested PCR method for detection of malaria].

Science.gov (United States)

Yao-Guang, Z; Li, J; Zhen-Yu, W; Li, C

2017-04-28

Objective To optimize the application of the nested PCR method for the detection of malaria according to the working practice, so as to improve the efficiency of malaria detection. Methods Premixing solution of PCR, internal primers for further amplification and new designed primers that aimed at two Plasmodium ovale subspecies were employed to optimize the reaction system, reaction condition and specific primers of P . ovale on basis of routine nested PCR. Then the specificity and the sensitivity of the optimized method were analyzed. The positive blood samples and examination samples of malaria were detected by the routine nested PCR and the optimized method simultaneously, and the detection results were compared and analyzed. Results The optimized method showed good specificity, and its sensitivity could reach the pg to fg level. The two methods were used to detect the same positive malarial blood samples simultaneously, the results indicated that the PCR products of the two methods had no significant difference, but the non-specific amplification reduced obviously and the detection rates of P . ovale subspecies improved, as well as the total specificity also increased through the use of the optimized method. The actual detection results of 111 cases of malarial blood samples showed that the sensitivity and specificity of the routine nested PCR were 94.57% and 86.96%, respectively, and those of the optimized method were both 93.48%, and there was no statistically significant difference between the two methods in the sensitivity ( P > 0.05), but there was a statistically significant difference between the two methods in the specificity ( P PCR can improve the specificity without reducing the sensitivity on the basis of the routine nested PCR, it also can save the cost and increase the efficiency of malaria detection as less experiment links.

Comparative evaluation of three cognitive error analysis methods through an application to accident management tasks in NPPs

International Nuclear Information System (INIS)

Jung, Won Dea; Kim, Jae Whan; Ha, Jae Joo; Yoon, Wan C.

1999-01-01

This study was performed to comparatively evaluate selected Human Reliability Analysis (HRA) methods which mainly focus on cognitive error analysis, and to derive the requirement of a new human error analysis (HEA) framework for Accident Management (AM) in nuclear power plants(NPPs). In order to achieve this goal, we carried out a case study of human error analysis on an AM task in NPPs. In the study we evaluated three cognitive HEA methods, HRMS, CREAM and PHECA, which were selected through the review of the currently available seven cognitive HEA methods. The task of reactor cavity flooding was chosen for the application study as one of typical tasks of AM in NPPs. From the study, we derived seven requirement items for a new HEA method of AM in NPPs. We could also evaluate the applicability of three cognitive HEA methods to AM tasks. CREAM is considered to be more appropriate than others for the analysis of AM tasks. But, PHECA is regarded less appropriate for the predictive HEA technique as well as for the analysis of AM tasks. In addition to these, the advantages and disadvantages of each method are described. (author)

Impacts modeling using the SPH particulate method. Case study

International Nuclear Information System (INIS)

Debord, R.

1999-01-01

The aim of this study is the modeling of the impact of melted metal on the reactor vessel head in the case of a core-meltdown accident. Modeling using the classical finite-element method alone is not sufficient but requires a coupling with particulate methods in order to take into account the behaviour of the corium. After a general introduction about particulate methods, the Nabor and SPH (smoothed particle hydrodynamics) methods are described. Then, the theoretical and numerical reliability of the SPH method is determined using simple cases. In particular, the number of neighbours significantly influences the preciseness of calculations. Also, the mesh of the structure must be adapted to the mesh of the fluid in order to reduce the edge effects. Finally, this study has shown that the values of artificial velocity coefficients used in the simulation of the BERDA test performed by the FZK Karlsruhe (Germany) are not correct. The domain of use of these coefficients was precised during a low speed impact. (J.S.)

Singularity-sensitive gauge-based radar rainfall adjustment methods for urban hydrological applications

Directory of Open Access Journals (Sweden)

L.-P. Wang

2015-09-01

Full Text Available Gauge-based radar rainfall adjustment techniques have been widely used to improve the applicability of radar rainfall estimates to large-scale hydrological modelling. However, their use for urban hydrological applications is limited as they were mostly developed based upon Gaussian approximations and therefore tend to smooth off so-called "singularities" (features of a non-Gaussian field that can be observed in the fine-scale rainfall structure. Overlooking the singularities could be critical, given that their distribution is highly consistent with that of local extreme magnitudes. This deficiency may cause large errors in the subsequent urban hydrological modelling. To address this limitation and improve the applicability of adjustment techniques at urban scales, a method is proposed herein which incorporates a local singularity analysis into existing adjustment techniques and allows the preservation of the singularity structures throughout the adjustment process. In this paper the proposed singularity analysis is incorporated into the Bayesian merging technique and the performance of the resulting singularity-sensitive method is compared with that of the original Bayesian (non singularity-sensitive technique and the commonly used mean field bias adjustment. This test is conducted using as case study four storm events observed in the Portobello catchment (53 km2 (Edinburgh, UK during 2011 and for which radar estimates, dense rain gauge and sewer flow records, as well as a recently calibrated urban drainage model were available. The results suggest that, in general, the proposed singularity-sensitive method can effectively preserve the non-normality in local rainfall structure, while retaining the ability of the original adjustment techniques to generate nearly unbiased estimates. Moreover, the ability of the singularity-sensitive technique to preserve the non-normality in rainfall estimates often leads to better reproduction of the urban

Singularity-sensitive gauge-based radar rainfall adjustment methods for urban hydrological applications

Science.gov (United States)

Wang, L.-P.; Ochoa-Rodríguez, S.; Onof, C.; Willems, P.

2015-09-01

Gauge-based radar rainfall adjustment techniques have been widely used to improve the applicability of radar rainfall estimates to large-scale hydrological modelling. However, their use for urban hydrological applications is limited as they were mostly developed based upon Gaussian approximations and therefore tend to smooth off so-called "singularities" (features of a non-Gaussian field) that can be observed in the fine-scale rainfall structure. Overlooking the singularities could be critical, given that their distribution is highly consistent with that of local extreme magnitudes. This deficiency may cause large errors in the subsequent urban hydrological modelling. To address this limitation and improve the applicability of adjustment techniques at urban scales, a method is proposed herein which incorporates a local singularity analysis into existing adjustment techniques and allows the preservation of the singularity structures throughout the adjustment process. In this paper the proposed singularity analysis is incorporated into the Bayesian merging technique and the performance of the resulting singularity-sensitive method is compared with that of the original Bayesian (non singularity-sensitive) technique and the commonly used mean field bias adjustment. This test is conducted using as case study four storm events observed in the Portobello catchment (53 km2) (Edinburgh, UK) during 2011 and for which radar estimates, dense rain gauge and sewer flow records, as well as a recently calibrated urban drainage model were available. The results suggest that, in general, the proposed singularity-sensitive method can effectively preserve the non-normality in local rainfall structure, while retaining the ability of the original adjustment techniques to generate nearly unbiased estimates. Moreover, the ability of the singularity-sensitive technique to preserve the non-normality in rainfall estimates often leads to better reproduction of the urban drainage system

Environmental applications of manometric respirometric methods

Energy Technology Data Exchange (ETDEWEB)

Roppola, K.

2009-07-01

In this work a manometric respirometric measuring system was applied to practical environmental cases related to wastewater management and biodegradation studies of oil-contaminated soils and materials used in landfill structures. Pollution of groundwater, surface water and soils is a worldwide problem. Therefore, tests simulating the biodegradation behaviour of organic compounds in water media and soils have become increasingly important. Respirometric methods provide direct measurement of the oxygen consumed by micro-organisms in biodegradation processes from an air or oxygen-enriched environment in a closed vessel. Biochemical oxygen demand (BOD) is a crucial environmental parameter used to measure the quality of water and treatment results in wastewater. Generally, BOD is measured with standardised methods, which are usually time-consuming as well as laborious. In this work the manometric respirometric test was compared with conventional BOD tests by determining the BOD of pulp and paper mills as well as domestic wastewater samples. The effect of different factors such as type, amount and pre-treatment of inoculum and the effect of dilution of a sample on the BOD values were also tested. A right dilution was noticed to be the most significant factor affecting the BOD values of the industrial wastewater samples. The mathematic estimation of the BOD7 values from the respirometric data was proved to work reliably after a 2-3 day incubation period. Characterisation of organic fractions of the pulp and paper mill wastewater was carried out with methods including filtration, long term BOD measurements and COD analyses. The most significant observation in characterisation analyses was that a remarkable part of the detected oxygen demand was consumed for the biotransformation of biodegradable fractions into new inert decomposition products, not only for mineralisation of the biodegradable COD fraction. Biodegradation behaviour of the peat samples with different

Helium leak testing methods in nuclear applications

International Nuclear Information System (INIS)

Ahmad, Anis

2004-01-01

Helium mass-spectrometer leak test is the most sensitive leak test method. It gives very reliable and sensitive test results. In last few years application of helium leak testing has gained more importance due to increased public awareness of safety and environment pollution caused by number of growing chemical and other such industries. Helium leak testing is carried out and specified in most of the critical area applications like nuclear, space, chemical and petrochemical industries

Methods for compressible multiphase flows and their applications

Science.gov (United States)

Kim, H.; Choe, Y.; Kim, H.; Min, D.; Kim, C.

2018-06-01

This paper presents an efficient and robust numerical framework to deal with multiphase real-fluid flows and their broad spectrum of engineering applications. A homogeneous mixture model incorporated with a real-fluid equation of state and a phase change model is considered to calculate complex multiphase problems. As robust and accurate numerical methods to handle multiphase shocks and phase interfaces over a wide range of flow speeds, the AUSMPW+_N and RoeM_N schemes with a system preconditioning method are presented. These methods are assessed by extensive validation problems with various types of equation of state and phase change models. Representative realistic multiphase phenomena, including the flow inside a thermal vapor compressor, pressurization in a cryogenic tank, and unsteady cavitating flow around a wedge, are then investigated as application problems. With appropriate physical modeling followed by robust and accurate numerical treatments, compressible multiphase flow physics such as phase changes, shock discontinuities, and their interactions are well captured, confirming the suitability of the proposed numerical framework to wide engineering applications.

A Modified Homogeneous Balance Method and Its Applications

International Nuclear Information System (INIS)

Liu Chunping

2011-01-01

A modified homogeneous balance method is proposed by improving some key steps in the homogeneous balance method. Bilinear equations of some nonlinear evolution equations are derived by using the modified homogeneous balance method. Generalized Boussinesq equation, KP equation, and mKdV equation are chosen as examples to illustrate our method. This approach is also applicable to a large variety of nonlinear evolution equations. (general)

Application of nuclear gamma methods in mining

International Nuclear Information System (INIS)

Simon, L.; Bosak, J.

1980-01-01

A brief review is presented of basic physical characteristics of laboratory, field and operating gamma methods, of their classifications and principles. The measuring instrumentation used and the current state of applications of nuclear gamma methods in coal and ore mining and related branches are described in detail. Principles and practical recommendations are given for safety at work when handling gamma sources. (B.S.)

Application of the N-quantum approximation method to bound state problems

International Nuclear Information System (INIS)

Raychaudhuri, A.

1977-01-01

The N-quantum approximation (NQA) method is examined in the light of its application to bound state problems. Bound state wave functions are obtained as expansion coefficients in a truncated Haag expansion. From the equations of motion for the Heisenberg field and the NQA expansion, an equation satisfied by the wave function is derived. Two different bound state systems are considered. In one case, the bound state problem of two identical scalars by scalar exchange is analyzed using the NQA. An integral equation satisfied by the wave function is derived. In the nonrelativistic limit, the equation is shown to reduce to the Schroedinger equation. The equation is solved numerically, and the results compared with those obtained for this system by other methods. The NQA method is also applied to the bound state of two spin 1/2 particles with electromagnetic interaction. The integral equation for the wave function is shown to agree with the corresponding Bethe Salpeter equation in the nonrelativistic limit. Using the Dirac (4 x 4) matrices the wave function is expanded in terms of structure functions and the equation for the wave function is reduced to two disjoint sets of coupled equation for the structure functions

Perancangan Case Tools untuk Diagram Use Case, Activity, dan Class untuk Permodelan Uml Berbasis Web Menggunakan HTML5 dan PHP

Directory of Open Access Journals (Sweden)

Mohammad Subekti

2014-12-01

Full Text Available This study is intended to generate an application tools (CASE tools that allows a software developer to create a modeling system design using Unified Modeling Language (UML, especially in making use case, activity or class diagrams more quickly and easily. The tools developed will also facilitate developers in doing UML modeling by accessing the network through a web-based internet application. With the web-based applications, the users require only a browser and an internet connection to use this application. This application also helps developers to understand of how to make UML diagrams correctly and good. In this research traditional methods Scrum model is used. Scrum method is Agile methods that is a process to cultivate software easily and can be developed in accordance with the development of information technology. Scrum is using empirical methods or in other words every stage in it involves inspection and adaptation.

The order and priority of research and design method application within an assistive technology new product development process: a summative content analysis of 20 case studies.

Science.gov (United States)

Torrens, George Edward

2018-01-01

Summative content analysis was used to define methods and heuristics from each case study. The review process was in two parts: (1) A literature review to identify conventional research methods and (2) a summative content analysis of published case studies, based on the identified methods and heuristics to suggest an order and priority of where and when were used. Over 200 research and design methods and design heuristics were identified. From the review of the 20 case studies 42 were identified as being applied. The majority of methods and heuristics were applied in phase two, market choice. There appeared a disparity between the limited numbers of methods frequently used, under 10 within the 20 case studies, when hundreds were available. Implications for Rehabilitation The communication highlights a number of issues that have implication for those involved in assistive technology new product development: •The study defined over 200 well-established research and design methods and design heuristics that are available for use by those who specify and design assistive technology products, which provide a comprehensive reference list for practitioners in the field; •The review within the study suggests only a limited number of research and design methods are regularly used by industrial design focused assistive technology new product developers; and, •Debate is required within the practitioners working in this field to reflect on how a wider range of potentially more effective methods and heuristics may be incorporated into daily working practice.

A new Tone's method in APOLLO3® and its application to fast and thermal reactor calculations

Directory of Open Access Journals (Sweden)

Li Mao

2017-09-01

Full Text Available This paper presents a newly developed resonance self-shielding method based on Tone's method in APOLLO3® for fast and thermal reactor calculations. The new method is based on simplified models, the narrow resonance approximation for the slowing down source and Tone's approximation for group collision probability matrix. It utilizes mathematical probability tables as quadrature formulas in calculating effective cross-sections. Numerical results for the ZPPR drawer calculations in 1,968 groups show that, in the case of the double-column fuel drawer, Tone's method gives equivalent precision to the subgroup method while markedly reducing the total number of collision probability matrix calculations and hence the central processing unit time. In the case of a single-column fuel drawer with the presence of a uranium metal material, Tone's method obtains less precise results than those of the subgroup method due to less precise heterogeneous–homogeneous equivalence. The same options are also applied to PWR UOX, MOX, and Gd cells using the SHEM 361-group library, with the objective of analyzing whether this energy mesh might be suitable for the application of this methodology to thermal systems. The numerical results show that comparable precision is reached with both Tone's and the subgroup methods, with the satisfactory representation of intrapellet spatial effects.

Analysis of application for situational teaching method in tourism English teaching

Directory of Open Access Journals (Sweden)

Li Jing

2016-01-01

Full Text Available Faced with China’s English teaching problems today, it is not enough to just know that the situational teaching method can be effectively applied in a wide range of English teaching, but there is a must to embody the specific application value of the situational teaching method. This paper first analyzes tourism English teaching in China through establishing the quantifiable group-index hierarchical structure model to obtain the optimal training program of China’s tourism English talents, and then carries out a detailed analysis of the application and role of the situational teaching method in training of the tourism English ability to obtain the specific application scope and application value of the situational teaching method in the tourism English teaching.

A statistical evaluation of formation disturbance produced by well- casing installation methods

Science.gov (United States)

Morin, R.H.; LeBlanc, D.R.; Teasdale, W.E.

1988-01-01

Water-resources investigations concerned with contaminant transport through aquifers comprised of very loose, unconsolidated sediments have shown that small-scale variations in aquifer characteristics can significantly affect solute transport and dispersion. Commonly, measurement accuracy and resolution have been limited by a borehole environment consisting of an annulus of disturbed sediments produced by the casing-installation method. In an attempt to quantify this disturbance and recognize its impact on the characterization of unconsolidated deposits, three installation methods were examined and compared in a sand-and-gravel outwash at a test site on Cape Cod, Massachusetts. These installation methods were: 1) casing installed in a mud-rotary hole; 2) casing installed in an augered hole; and 3) flush-joint steel casing hammer-driven from land surface. Fifteen wells were logged with epithermal neutron and natural gamma tools. Concludes that augering is the most disruptive of the three casing-installation methods and that driving casing directly, though typically a more time-consuming operation, transmits the least amount of disturbance into the surrounding formation. -from Authors

Apparatus and method for vibrating a casing string during cementing

International Nuclear Information System (INIS)

Rankin, R.E.; Rankin, K.T.

1992-01-01

This patent describes a method of cementing a string of casing in a well. It comprises: securing a vibrating device into the string of casing near the lower end of the string of casing; lowering the string of casing into the well to the desired depth; pumping a cement slurry down the string of casing; causing a portion of the cement slurry being pumped down the string of casing to vibrate the vibrating device; and wherein the vibrating device is secured in the string of casing by cementing the vibrating device within a sub, then securing the sub into the string of casing prior to lowering the string of casing into the well

Agile application development for mobile devices. Case study: Mobile taximeter

Directory of Open Access Journals (Sweden)

Angélica María Babativa Goyeneche

2016-10-01

Full Text Available Context: Globalization has affected all productive sectors and in particular the software industry, which has required the development of new methodologies to suit the speed of the changes and allow quickly build products that meet the requirements of the customers. On the other hand, the GPS technology, 4G connectivity and integration of social networks that have the most current mobile phones have opened a large field of application, particularly in the area of the transport, mobility and citizen complaint, whose development can be successfully addressed through an agile methodology. Method: Agile methodology Scrum was used for the development of a mobile application on the Android operating system and GPS technology, which allows a Bogota taxi user to monitor the route and send a complaint to the social network Twitter in case of nonconformity. Some UML models were used for analysis and design of the application, and a confidence interval was used to validate the results. Results: Prototype of a mobile taximeter developed with an agile methodology that meets quality characteristics, extensibility and maintainability. T-student distribution was used to validate the measurement of the prototype on 50 samples, concluding that the difference between the measurement of a real taximeter and our mobile taximeter is on average 2 units with a standard deviation of 1,39 units. Conclusions: It is shown that with the agile development can be combined with UML modeling tools and statistical validation techniques for quality products that do not violate, but on the contrary, that reaffirm the agile development principles.

ENERGETIC AND EXERGETIC ASSESSMENT OF DISPLAY CASES USED IN THE MARKET APPLICATIONS FOR PREFERENCE REFRIGERANT

Directory of Open Access Journals (Sweden)

M.Ziya SOGUT

2013-01-01

Full Text Available This study examines energy and exergy analyses of display cases used to preserve daily products in market applications for different refrigerants. In the study, vapor compression cooling cycle is taken as a model and R22, R134a, R404A and R507C refrigerants used in common application and R407C, R410A and R422D evaluated as alternative refrigerants are studied under constant load in cycle. According to COP and exergy analyses, R134a gas and alternative gas R407C have come forth among the other gases with values 5.33 and 60.86%, and 5.41 and 62.04% respectively. The study finally emphasizes the importance of exergy analysis which is an important method to determine irreversibility of the systems.

A Method for Exploring Program and Portfolio Affordability Tradeoffs Under Uncertainty Using Epoch-Era Analysis: A Case Application to Carrier Strike Group Design

Science.gov (United States)

2015-04-30

design for affordability by augmenting Epoch-Era Analysis with aspects of Modern Portfolio Theory . The method is demonstrated through the design of a...introduces a method to conduct portfolio design for affordability by augmenting Epoch-Era Analysis with aspects of Modern Portfolio Theory . The method...through the integration of elements of Modern Portfolio Theory (MPT) and the SoS design literature. The proposed method is demonstrated in a case study

Mainstreaming Disaster Risk Management for Finance: Application of Real Options Method for Disaster Risk Sensitive Project

Directory of Open Access Journals (Sweden)

KUSDHIANTO SETIAWAN

Full Text Available This paper discusses the application of real options analysis for a project that is in the process of construction and was affected by a natural disaster. The use of the analytical method has become a way of thinking in making decisions that should be taught to business school students. The case in this paper is based on an MBA thesis at the University of Gadjah Mada that was intended as a showcase for application of real options to address real business problems. It shows one of the strategies in mainstreaming disaster risk management in the business school that also answers the needs of businesses in the disaster-prone country.

Keller-box method and its application

CERN Document Server

Prasad, Kerehalli V

2014-01-01

Most of the problems arising in science and engineering are nonlinear. They are inherently difficult to solve. Traditional analytical approximations are valid only for weakly nonlinear problems, and often break down for problems with strong nonlinearity. This book presents the current theoretical developments and applications of Keller-Box method to nonlinear problems. The first half of the bookaddresses basic concepts to understand the theoretical framework for the method. In the second half of the book, the authorsgive a number of examples of coupled nonlinear problems that have been solved

Myocardium scintiscanning with thallium-201 in case of idiopathic juvenile arteriosclerosis (description of a case and information on further applications of nuclear-medical diagnostic techniques in pediatric cardiology)

International Nuclear Information System (INIS)

Hoer, G.; Maul, F.D.; Munz, D.L.; Vettermann, H.

1985-01-01

In the field of pediatrics and the related literature, the analysis of myocardial perfusion and ventricular function using myocardium scintiscanning and radionuclide ventriculography is a subject discussed rather rarely, in contrast to the medical examination of adult patients where this is a well-established method. The authors have so far not found any information on the use of scintiscanning methods for the diagnosis of idiopathic juvenile arteriosclerosis and hence take the opportunity to describe a case of recent application of this method. In addition, findings and results are discussed that speak in favour of the use of further nuclear-medical techniques in pediatric cardiology. (orig./MG) [de

Application of Raman spectroscopy to forensic fibre cases.

Science.gov (United States)

Lepot, L; De Wael, K; Gason, F; Gilbert, B

2008-09-01

Five forensic fibre cases in which Raman spectroscopy proved to be a good complementary method for microspectrophotometry (MSP) are described. Absorption spectra in the visible range are indeed sometimes characteristic ofa certain dye but this one can be subsequently identified unambiguously by Raman spectroscopy using a spectral library. In other cases the comparison of Raman spectra of reference fibres and suspect fibres led to an improvement of the discrimination power. The Raman measurements have been performed directly on mounted fibres and the spectra showed only little interference from the mounting resin and glass. Raman spectroscopy is therefore a powerful method that can be applied in routine fibre analysis following optical microscopy and MSP measurements.

Application of simple approximate system analysis methods for reliability and availability improvement of reactor WWER-1000

International Nuclear Information System (INIS)

Manchev, B.; Marinova, B.; Nenkova, B.

2001-01-01

The method described on this report provides a set of simple, easily understood 'approximate' models applicable to a large class of system architectures. Constructing a Markov model of each redundant subsystem and its replacement after that by a pseudo-component develops the approximation models. Of equal importance, the models can be easily understood even of non-experts, including managers, high-level decision-makers and unsophisticated consumers. A necessary requirement for their application is the systems to be repairable and the mean time to repair to be much smaller than the mean time to failure. This ia a case most often met in the real practice. Results of the 'approximate' model application on a technological system of Kozloduy NPP are also presented. The results obtained can be compared quite favorably with the results obtained by using SAPHIRE software

Several cases of electronics and the measuring methods

International Nuclear Information System (INIS)

Supardiyono, Bb.; Kamadi, J.; Suparmono, M.; Indarto.

1980-01-01

Several cases of electronics and the measuring methods, covering electric conductivity and electric potential of analog systems, electric current, electric conductivity and electric potential of semiconductor diodes, and characteristics of transistors are described. (SMN)

Hierarchical Matrices Method and Its Application in Electromagnetic Integral Equations

Directory of Open Access Journals (Sweden)

Han Guo

2012-01-01

Full Text Available Hierarchical (H- matrices method is a general mathematical framework providing a highly compact representation and efficient numerical arithmetic. When applied in integral-equation- (IE- based computational electromagnetics, H-matrices can be regarded as a fast algorithm; therefore, both the CPU time and memory requirement are reduced significantly. Its kernel independent feature also makes it suitable for any kind of integral equation. To solve H-matrices system, Krylov iteration methods can be employed with appropriate preconditioners, and direct solvers based on the hierarchical structure of H-matrices are also available along with high efficiency and accuracy, which is a unique advantage compared to other fast algorithms. In this paper, a novel sparse approximate inverse (SAI preconditioner in multilevel fashion is proposed to accelerate the convergence rate of Krylov iterations for solving H-matrices system in electromagnetic applications, and a group of parallel fast direct solvers are developed for dealing with multiple right-hand-side cases. Finally, numerical experiments are given to demonstrate the advantages of the proposed multilevel preconditioner compared to conventional “single level” preconditioners and the practicability of the fast direct solvers for arbitrary complex structures.

Saudi Arabia’s Counterterrorism Methods: A Case Study on Homeland Security

Science.gov (United States)

2017-06-01

Approved for public release. Distribution is unlimited. SAUDI ARABIA’S COUNTERTERRORISM METHODS: A CASE STUDY ON HOMELAND SECURITY Majed M...examined in the previous chapter with examples from the case studies related to terrorist attacks and Saudi Arabia’s responses. Furthermore, the...COUNTERTERRORISM METHODS: A CASE STUDY ON HOMELAND SECURITY by Majed M. Bin Madhian June 2017 Thesis Advisor: James Russell Co-Advisor

Ethical case deliberation on the ward. A comparison of four methods.

Science.gov (United States)

Steinkamp, Norbert; Gordijn, Bert

2003-01-01

The objective of this article is to analyse and compare four methods of ethical case deliberation. These include Clinical Pragmatism, The Nijmegen Method of ethical case deliberation, Hermeneutic dialogue, and Socratic dialogue. The origin of each method will be briefly sketched. Furthermore, the methods as well as the related protocols will be presented. Each method will then be evaluated against the background of those situations in which it is being used. The article aims to show that there is not one ideal method of ethical case deliberation, which fits to all possible kinds of moral problems. Rather, as each of the methods highlights a limited number of morally relevant aspects, each method has its strengths and weaknesses as well. These strengths and weaknesses should be evaluated in relation to different types of situations, for instance moral problems in treatment decisions, moral uneasiness and residue, and the like. The suggestion arrived at on the basis of the findings of this paper is a reasonable methodological plurality. This means that a method can be chosen depending on the type of moral problem to be deliberated upon. At the same time it means, that by means of a method, deliberation should be facilitated.

Aggregative Learning Method and Its Application for Communication Quality Evaluation

Science.gov (United States)

Akhmetov, Dauren F.; Kotaki, Minoru

2007-12-01

In this paper, so-called Aggregative Learning Method (ALM) is proposed to improve and simplify the learning and classification abilities of different data processing systems. It provides a universal basis for design and analysis of mathematical models of wide class. A procedure was elaborated for time series model reconstruction and analysis for linear and nonlinear cases. Data approximation accuracy (during learning phase) and data classification quality (during recall phase) are estimated from introduced statistic parameters. The validity and efficiency of the proposed approach have been demonstrated through its application for monitoring of wireless communication quality, namely, for Fixed Wireless Access (FWA) system. Low memory and computation resources were shown to be needed for the procedure realization, especially for data classification (recall) stage. Characterized with high computational efficiency and simple decision making procedure, the derived approaches can be useful for simple and reliable real-time surveillance and control system design.

Acoustic methods for cavitation mapping in biomedical applications

Science.gov (United States)

Wan, M.; Xu, S.; Ding, T.; Hu, H.; Liu, R.; Bai, C.; Lu, S.

2015-12-01

In recent years, cavitation is increasingly utilized in a wide range of applications in biomedical field. Monitoring the spatial-temporal evolution of cavitation bubbles is of great significance for efficiency and safety in biomedical applications. In this paper, several acoustic methods for cavitation mapping proposed or modified on the basis of existing work will be presented. The proposed novel ultrasound line-by-line/plane-by-plane method can depict cavitation bubbles distribution with high spatial and temporal resolution and may be developed as a potential standard 2D/3D cavitation field mapping method. The modified ultrafast active cavitation mapping based upon plane wave transmission and reception as well as bubble wavelet and pulse inversion technique can apparently enhance the cavitation to tissue ratio in tissue and further assist in monitoring the cavitation mediated therapy with good spatial and temporal resolution. The methods presented in this paper will be a foundation to promote the research and development of cavitation imaging in non-transparent medium.

A new dynamic HRA method and its application

International Nuclear Information System (INIS)

Je, Moo Sung; Park, Chang Kyoo

1995-01-01

This paper presents a new dynamic HRA (Human Reliability Analysis) method and its application for quantifying the human error probabilities in implementing an accident management action. For comparisons of current HRA methods with the new method, the characteristics of THERP, HCR, and SLIM-MAUD, which are most frequently used methods in PSAs, are discussed. The action associated with the implementation of the cavity flooding during a station blackout sequence is considered for its application. This method is based on the concepts of the quantified correlation between the performance requirement and performance achievement. The MAAP 3.0B code and Latin Hypercube sampling technique are used to determine the uncertainty of the performance achievement parameter. Meanwhile, the value of the performance requirement parameter is obtained from interviews. Based on these stochastic distributions obtained, human error probabilities are calculated with respect to the various means and variances of the timings. It is shown that this method is very flexible in that it can be applied to any kind of the operator actions, including the actions associated with the implementation of accident management strategies. 1 fig., 3 tabs., 17 refs. (Author)

A comparison of fitness-case sampling methods for genetic programming

Science.gov (United States)

Martínez, Yuliana; Naredo, Enrique; Trujillo, Leonardo; Legrand, Pierrick; López, Uriel

2017-11-01

Genetic programming (GP) is an evolutionary computation paradigm for automatic program induction. GP has produced impressive results but it still needs to overcome some practical limitations, particularly its high computational cost, overfitting and excessive code growth. Recently, many researchers have proposed fitness-case sampling methods to overcome some of these problems, with mixed results in several limited tests. This paper presents an extensive comparative study of four fitness-case sampling methods, namely: Interleaved Sampling, Random Interleaved Sampling, Lexicase Selection and Keep-Worst Interleaved Sampling. The algorithms are compared on 11 symbolic regression problems and 11 supervised classification problems, using 10 synthetic benchmarks and 12 real-world data-sets. They are evaluated based on test performance, overfitting and average program size, comparing them with a standard GP search. Comparisons are carried out using non-parametric multigroup tests and post hoc pairwise statistical tests. The experimental results suggest that fitness-case sampling methods are particularly useful for difficult real-world symbolic regression problems, improving performance, reducing overfitting and limiting code growth. On the other hand, it seems that fitness-case sampling cannot improve upon GP performance when considering supervised binary classification.

Photogrammetric methods of measurement in industrial applications

International Nuclear Information System (INIS)

Godding, R.; Groene, A.; Heinrich, G.; Schneider, C.T.

1993-01-01

Methods for 3D measurement are required for very varied applications in the industrial field. This includes tasks of quality assurance and plant monitoring, among others. It should be possible to apply the process flexibly it should require as short interruptions of production as possible and should meet the required accuracies. These requirements can be met by photogrammetric methods of measurement. The article introduces these methods and shows their capabilities from various selected examples (eg: the replacement of large components in a pressurized water reactor, and aircraft measurements (orig./DG) [de

Comparison of global sensitivity analysis methods – Application to fuel behavior modeling

Energy Technology Data Exchange (ETDEWEB)

Ikonen, Timo, E-mail: timo.ikonen@vtt.fi

2016-02-15

Highlights: • Several global sensitivity analysis methods are compared. • The methods’ applicability to nuclear fuel performance simulations is assessed. • The implications of large input uncertainties and complex models are discussed. • Alternative strategies to perform sensitivity analyses are proposed. - Abstract: Fuel performance codes have two characteristics that make their sensitivity analysis challenging: large uncertainties in input parameters and complex, non-linear and non-additive structure of the models. The complex structure of the code leads to interactions between inputs that show as cross terms in the sensitivity analysis. Due to the large uncertainties of the inputs these interactions are significant, sometimes even dominating the sensitivity analysis. For the same reason, standard linearization techniques do not usually perform well in the analysis of fuel performance codes. More sophisticated methods are typically needed in the analysis. To this end, we compare the performance of several sensitivity analysis methods in the analysis of a steady state FRAPCON simulation. The comparison of importance rankings obtained with the various methods shows that even the simplest methods can be sufficient for the analysis of fuel maximum temperature. However, the analysis of the gap conductance requires more powerful methods that take into account the interactions of the inputs. In some cases, moment-independent methods are needed. We also investigate the computational cost of the various methods and present recommendations as to which methods to use in the analysis.

Application of geo-information science methods in ecotourism exploitation

Science.gov (United States)

Dong, Suocheng; Hou, Xiaoli

2004-11-01

Application of geo-information science methods in ecotourism development was discussed in the article. Since 1990s, geo-information science methods, which take the 3S (Geographic Information System, Global Positioning System, and Remote Sensing) as core techniques, has played an important role in resources reconnaissance, data management, environment monitoring, and regional planning. Geo-information science methods can easily analyze and convert geographic spatial data. The application of 3S methods is helpful to sustainable development in tourism. Various assignments are involved in the development of ecotourism, such as reconnaissance of ecotourism resources, drawing of tourism maps, dealing with mass data, and also tourism information inquire, employee management, quality management of products. The utilization of geo-information methods in ecotourism can make the development more efficient by promoting the sustainable development of tourism and the protection of eco-environment.

Application of flaw detection methods for detection of fatigue processes in low-alloyed steel

Directory of Open Access Journals (Sweden)

Zbigniew H. śUREK

2007-01-01

Full Text Available The paper presents the investigations conducted in the Fraunhofer Institute (IZFP Saarbrücken by use of a BEMI microscope (BEMI= Barkhausenrausch- und Wirbelstrom-Mikroskopie or Barkhausen Noise and Eddy Current Microscopy. The ability to detect cyclic and contact fatigue load influences has been investigated. The measurement amplitudes obtained with Barkhausen Noise and Eddy Current probes havebeen analysed. Correlation of measurement results and material’s condition has been observed in case of the eddy current mode method for frequencies above 2 MHz (for contact-loaded material samples. Detection of material’s fatigue process (at 80 % fatiguelife in the sample subjected to series of high-cyclic loads has been proven to be practically impossible. Application of flaw detection methods in material fatigue tests requires modification of test methods and use of investigation methods relevant to physical parameters of the investigated material. The magnetic leakage field method, which has been abandoned by many researchers, may be of significant use in the material fatigue assessment and may provide new research prospects.

Biometrics Theory, Methods, and Applications

CERN Document Server

Boulgouris, N V; Micheli-Tzanakou, Evangelia

2009-01-01

An in-depth examination of the cutting edge of biometrics. This book fills a gap in the literature by detailing the recent advances and emerging theories, methods, and applications of biometric systems in a variety of infrastructures. Edited by a panel of experts, it provides comprehensive coverage of:. Multilinear discriminant analysis for biometric signal recognition;. Biometric identity authentication techniques based on neural networks;. Multimodal biometrics and design of classifiers for biometric fusion;. Feature selection and facial aging modeling for face recognition;. Geometrical and

Application of the integral method to modelling the oxidation of defected fuel elements

International Nuclear Information System (INIS)

Kolar, M.

1995-06-01

The starting point for this report is the discrepancy reported in previous work between the reaction-diffusion calculations and the CEX-1 experiment, which involves storage of defected fuel elements in air at 150 deg C. This discrepancy is considerably diminished here by a more critical choice of theoretical parameters, and by taking into account the fact that different CEX-1 fuel elements were oxidized at very different rates and that the fuel element used previously for comparison with theoretical calculations actually underwent two limited-oxygen-supply cycles. Much better agreement is obtained here between the theory and the third, unlimited-air, storage period of the CEX-1 experiment. The approximate integral method is used extensively for the solution of the one-dimensional diffusion moving-boundary problems that may describe various storage periods of the CEX-1 experiment. In some cases it is easy to extend this method to arbitrary precision by using higher moments of the diffusion equation. Using this method, the validity of quasi-steady-state approximation is verified. Diffusion-controlled oxidation is also studied. In this case, for the unlimited oxygen supply, the integral method leads to an exact analytical solution for linear geometry, and to a good analytical approximation of the solution for the spherically symmetric geometry. These solutions may have some application in the analysis of experiments on the oxidation of small UO 2 fragments or powders when the individual UO 2 grains may be considered to be approximately spherical. (author). 23 refs., 5 tabs., 11 figs

Green's function method and its application to verification of diffusion models of GASFLOW code

International Nuclear Information System (INIS)

Xu, Z.; Travis, J.R.; Breitung, W.

2007-07-01

To validate the diffusion model and the aerosol particle model of the GASFLOW computer code, theoretical solutions of advection diffusion problems are developed by using the Green's function method. The work consists of a theory part and an application part. In the first part, the Green's functions of one-dimensional advection diffusion problems are solved in infinite, semi-infinite and finite domains with the Dirichlet, the Neumann and/or the Robin boundary conditions. Novel and effective image systems especially for the advection diffusion problems are made to find the Green's functions in a semi-infinite domain. Eigenfunction method is utilized to find the Green's functions in a bounded domain. In the case, key steps of a coordinate transform based on a concept of reversed time scale, a Laplace transform and an exponential transform are proposed to solve the Green's functions. Then the product rule of the multi-dimensional Green's functions is discussed in a Cartesian coordinate system. Based on the building blocks of one-dimensional Green's functions, the multi-dimensional Green's function solution can be constructed by applying the product rule. Green's function tables are summarized to facilitate the application of the Green's function. In the second part, the obtained Green's function solutions benchmark a series of validations to the diffusion model of gas species in continuous phase and the diffusion model of discrete aerosol particles in the GASFLOW code. Perfect agreements are obtained between the GASFLOW simulations and the Green's function solutions in case of the gas diffusion. Very good consistencies are found between the theoretical solutions of the advection diffusion equations and the numerical particle distributions in advective flows, when the drag force between the micron-sized particles and the conveying gas flow meets the Stokes' law about resistance. This situation is corresponding to a very small Reynolds number based on the particle

Homotopy of operads and Grothendieck–Teichmüller groups part 2 the applications of (rational) homotopy theory methods

CERN Document Server

Fresse, Benoit

2017-01-01

The ultimate goal of this book is to explain that the Grothendieck-Teichmüller group, as defined by Drinfeld in quantum group theory, has a topological interpretation as a group of homotopy automorphisms associated to the little 2-disc operad. To establish this result, the applications of methods of algebraic topology to operads must be developed. This volume is devoted primarily to this subject, with the main objective of developing a rational homotopy theory for operads. The book starts with a comprehensive review of the general theory of model categories and of general methods of homotopy theory. The definition of the Sullivan model for the rational homotopy of spaces is revisited, and the definition of models for the rational homotopy of operads is then explained. The applications of spectral sequence methods to compute homotopy automorphism spaces associated to operads are also explained. This approach is used to get a topological interpretation of the Grothendieck-Teichmüller group in the case of the ...

Minimal Residual Disease Assessment in Lymphoma: Methods and Applications.

Science.gov (United States)

Herrera, Alex F; Armand, Philippe

2017-12-01

Standard methods for disease response assessment in patients with lymphoma, including positron emission tomography and computed tomography scans, are imperfect. In other hematologic malignancies, particularly leukemias, the ability to detect minimal residual disease (MRD) is increasingly influencing treatment paradigms. However, in many subtypes of lymphoma, the application of MRD assessment techniques, like flow cytometry or polymerase chain reaction-based methods, has been challenging because of the absence of readily detected circulating disease or canonic chromosomal translocations. Newer MRD detection methods that use next-generation sequencing have yielded promising results in a number of lymphoma subtypes, fueling the hope that MRD detection may soon be applicable in clinical practice for most patients with lymphoma. MRD assessment can provide real-time information about tumor burden and response to therapy, noninvasive genomic profiling, and monitoring of clonal dynamics, allowing for many possible applications that could significantly affect the care of patients with lymphoma. Further validation of MRD assessment methods, including the incorporation of MRD assessment into clinical trials in patients with lymphoma, will be critical to determine how best to deploy MRD testing in routine practice and whether MRD assessment can ultimately bring us closer to the goal of personalized lymphoma care. In this review article, we describe the methods available for detecting MRD in patients with lymphoma and their relative advantages and disadvantages. We discuss preliminary results supporting the potential applications for MRD testing in the care of patients with lymphoma and strategies for including MRD assessment in lymphoma clinical trials.

A new ore reserve estimation method, Yang Chizhong filtering and inferential measurement method, and its application

International Nuclear Information System (INIS)

Wu Jingqin.

1989-01-01

Yang Chizhong filtering and inferential measurement method is a new method used for variable statistics of ore deposits. In order to apply this theory to estimate the uranium ore reserves under the circumstances of regular or irregular prospecting grids, small ore bodies, less sampling points, and complex occurrence, the author has used this method to estimate the ore reserves in five ore bodies of two deposits and achieved satisfactory results. It is demonstrated that compared with the traditional block measurement method, this method is simple and clear in formula, convenient in application, rapid in calculation, accurate in results, less expensive, and high economic benefits. The procedure and experience in the application of this method and the preliminary evaluation of its results are mainly described

An Application-Level QoS Control Method Based on Local Bandwidth Scheduling

Directory of Open Access Journals (Sweden)

Yong Wang

2018-01-01

Full Text Available Quality of service (QoS is an important performance indicator for Web applications and bandwidth is a key factor affecting QoS. Current methods use network protocols or ports to schedule bandwidth, which require tedious manual configurations or modifications of the underlying network. Some applications use dynamic ports and the traditional port-based bandwidth control methods cannot deal with them. A new QoS control method based on local bandwidth scheduling is proposed, which can schedule bandwidth at application level in a user-transparent way and it does not require tedious manual configurations. Experimental results indicate that the new method can effectively improve the QoS for applications, and it can be easily integrated into current Web applications without the need to modify the underlying network.

Clinical application analysis of 3D-CRT methods using tomography

Energy Technology Data Exchange (ETDEWEB)

Cho, Kang Chul; Kyum, Hun Kyum; Kim, Joo Ho; Ahn, Seung Kwon; Lee, Sang Kyoo; Yoon, Jong Won; Cho, Jeong Hee [Dept. of Radiation Oncology, Yonsei Cancer Center, Yonsei University Health System, Seoul (Korea, Republic of); Lee, Jong Seok; Yoo, Beong Gyu [Dept. of Radiotechnology, Wonkwang Health Science University, Iksan (Korea, Republic of)

2013-12-15

This study investigates the case of clinical application for TomoDirect 3D-CRT(TD-3D) and TomoHelical 3D-CRT(TH-3D) with evaluating dose distribution for clinical application in each case. Treatment plans were created for 8 patients who had 3 dimensional conformal radiation therapy using TD-3D and TH-3D mode. Each patients were treated for sarcoma, CSI(craniospinal irradiation), breast, brain, pancreas, spine metastasis, SVC syndrome and esophagus. DVH(dose volume histogram) and isodose curve were used for comparison of each treatment modality. TD-3D shows better dose distribution over the irradiation field without junction effect because TD-3D was not influenced by target length for sarcoma and CSI case. In breast case, dosimetric results of CTV, the average value of D 99%, D 95% were 49.2±0.4 Gy, 49.9±0.4 Gy and V 105%, V 110% were 0%, respectively. TH-3D with the dosimetric block decreased dose of normal organ in brain, pancreas, spine metastasis case. SCV syndrome also effectively decreased dose of normal organ by using dose block to the critical organs(spinal cord <38 Gy). TH-3D combined with other treatment modalities was possible to boost irradiation and was total dose was reduced to spinal cord in esophagus case(spinal cord <45 Gy, lung V 20 <20%). 3D-CRT using Tomotherapy could overcomes some dosimetric limitations, when we faced Conventional Linac based CRT and shows clinically proper dose distribution. In conclusion, 3D-CRT using Tomotherapy will be one of the effective 3D-CRT techniques.

RDBMS Applications as Online Based Data Archive: A Case of Harbour Medical Center in Pekanbaru

Science.gov (United States)

Febriadi, Bayu; Zamsuri, Ahmad

2017-12-01

Kantor Kesehatan Pelabuhan Kelas II Pekanbaru is a government office that concerns about healthy, especially about environment health. There is a problem in case of saving electronic data, also in analyzing daily data both for internal and external data. The office has some computers and other tools that are useful in saving electronic data. In fact, the data are still saved in available cupboards and it is not efficient for an important data that is analyzed for more than one time. In other words, it is not good for a data is needed to be analyzed continuously. Rational Data Base Management System (RDBMS) application is an online based saving data and it uses System Development Life Cycle (SDLC) method. Hopefully, the application will be very useful for employees Kantor Kesehatan Pelabuhan Pekanbaru in managing their work.

A critical evaluation of worst case optimization methods for robust intensity-modulated proton therapy planning

International Nuclear Information System (INIS)

Fredriksson, Albin; Bokrantz, Rasmus

2014-01-01

Purpose: To critically evaluate and compare three worst case optimization methods that have been previously employed to generate intensity-modulated proton therapy treatment plans that are robust against systematic errors. The goal of the evaluation is to identify circumstances when the methods behave differently and to describe the mechanism behind the differences when they occur. Methods: The worst case methods optimize plans to perform as well as possible under the worst case scenario that can physically occur (composite worst case), the combination of the worst case scenarios for each objective constituent considered independently (objectivewise worst case), and the combination of the worst case scenarios for each voxel considered independently (voxelwise worst case). These three methods were assessed with respect to treatment planning for prostate under systematic setup uncertainty. An equivalence with probabilistic optimization was used to identify the scenarios that determine the outcome of the optimization. Results: If the conflict between target coverage and normal tissue sparing is small and no dose-volume histogram (DVH) constraints are present, then all three methods yield robust plans. Otherwise, they all have their shortcomings: Composite worst case led to unnecessarily low plan quality in boundary scenarios that were less difficult than the worst case ones. Objectivewise worst case generally led to nonrobust plans. Voxelwise worst case led to overly conservative plans with respect to DVH constraints, which resulted in excessive dose to normal tissue, and less sharp dose fall-off than the other two methods. Conclusions: The three worst case methods have clearly different behaviors. These behaviors can be understood from which scenarios that are active in the optimization. No particular method is superior to the others under all circumstances: composite worst case is suitable if the conflicts are not very severe or there are DVH constraints whereas

Application of a quick-freezing and deep-etching method to pathological diagnosis: a case of elastofibroma.

Science.gov (United States)

Hemmi, Akihiro; Tabata, Masahiko; Homma, Taku; Ohno, Nobuhiko; Terada, Nobuo; Fujii, Yasuhisa; Ohno, Shinichi; Nemoto, Norimichi

2006-04-01

A case of elastofibroma in a middle-aged Japanese woman was examined by the quick-freezing and deep-etching (QF-DE) method, as well as by immunohistochemistry and conventional electron microscopy. The slowly growing tumor developed at the right scapular region and was composed of fibrous connective tissue with unique elastic materials called elastofibroma fibers. A normal elastic fiber consists of a central core and peripheral zone, in which the latter has small aggregates of 10 nm microfibrils. By the QF-DE method, globular structures consisting of numerous fibrils (5-20 nm in width) were observed between the collagen bundles. We could confirm that they were microfibril-rich peripheral zones of elastofibroma fibers by comparing the replica membrane and conventional electron microscopy. One of the characteristics of elastofibroma fibers is that they are assumed to contain numerous microfibrils. Immunohistochemically, spindle tumor cells showed positive immunoreaction for vimentin, whereas alpha-smooth muscle actin, desmin, S-100 protein and CD34 showed negative immunoreaction. By conventional electron microscopy, the tumor cell had thin cytoplasmic processes, pinocytotic vesicles and prominent rough endoplasmic reticulum. Abundant intracytoplasmic filaments were observed in some tumor cells. Thick lamina-like structures along with their inner nuclear membrane were often observed in the tumor cell nuclei. The whole image of the tumor cell was considered to be a periosteal-derived cell, which would produce numerous microfibrils in the peripheral zone of elastofibroma fibers. This study indicated that the QF-DE method could be applied to the pathological diagnosis and analysis of pathomechanism, even for surgical specimens obtained from a patient.

Preconditioning of iterative methods - theory and applications

Czech Academy of Sciences Publication Activity Database

Axelsson, Owe; Blaheta, Radim; Neytcheva, M.; Pultarová, I.

2015-01-01

Roč. 22, č. 6 (2015), s. 901-902 ISSN 1070-5325 Institutional support: RVO:68145535 Keywords : preconditioning * iterative methods * applications Subject RIV: BA - General Mathematics Impact factor: 1.431, year: 2015 http://onlinelibrary.wiley.com/doi/10.1002/nla.2016/epdf

Multi-level decision making models, methods and applications

CERN Document Server

Zhang, Guangquan; Gao, Ya

2015-01-01

This monograph presents new developments in multi-level decision-making theory, technique and method in both modeling and solution issues. It especially presents how a decision support system can support managers in reaching a solution to a multi-level decision problem in practice. This monograph combines decision theories, methods, algorithms and applications effectively. It discusses in detail the models and solution algorithms of each issue of bi-level and tri-level decision-making, such as multi-leaders, multi-followers, multi-objectives, rule-set-based, and fuzzy parameters. Potential readers include organizational managers and practicing professionals, who can use the methods and software provided to solve their real decision problems; PhD students and researchers in the areas of bi-level and multi-level decision-making and decision support systems; students at an advanced undergraduate, master’s level in information systems, business administration, or the application of computer science.  

Methods and applications in high flux neutron imaging

International Nuclear Information System (INIS)

Ballhausen, H.

2007-01-01

This treatise develops new methods for high flux neutron radiography and high flux neutron tomography and describes some of their applications in actual experiments. Instead of single images, time series can be acquired with short exposure times due to the available high intensity. To best use the increased amount of information, new estimators are proposed, which extract accurate results from the recorded ensembles, even if the individual piece of data is very noisy and in addition severely affected by systematic errors such as an influence of gamma background radiation. The spatial resolution of neutron radiographies, usually limited by beam divergence and inherent resolution of the scintillator, can be significantly increased by scanning the sample with a pinhole-micro-collimator. This technique circumvents any limitations in present detector design and, due to the available high intensity, could be successfully tested. Imaging with scattered neutrons as opposed to conventional total attenuation based imaging determines separately the absorption and scattering cross sections within the sample. For the first time even coherent angle dependent scattering could be visualized space-resolved. New applications of high flux neutron imaging are presented, such as materials engineering experiments on innovative metal joints, time-resolved tomography on multilayer stacks of fuel cells under operation, and others. A new implementation of an algorithm for the algebraic reconstruction of tomography data executes even in case of missing information, such as limited angle tomography, and returns quantitative reconstructions. The setup of the world-leading high flux radiography and tomography facility at the Institut Laue-Langevin is presented. A comprehensive appendix covers the physical and technical foundations of neutron imaging. (orig.)

Application of nonlinear systems in nanomechanics and nanofluids analytical methods and applications

CERN Document Server

Ganji, Davood Domairry

2015-01-01

With Application of Nonlinear Systems in Nanomechanics and Nanofluids the reader gains a deep and practice-oriented understanding of nonlinear systems within areas of nanotechnology application as well as the necessary knowledge enabling the handling of such systems. The book helps readers understand relevant methods and techniques for solving nonlinear problems, and is an invaluable reference for researchers, professionals and PhD students interested in research areas and industries where nanofluidics and dynamic nano-mechanical systems are studied or applied. The book is useful in areas suc

Development and feasibility of smartphone application for cognitive-behavioural case management of individuals with early psychosis.

Science.gov (United States)

Kim, Sung-Wan; Lee, Ga-Young; Yu, Hye-Young; Jung, Eun-I; Lee, Ju-Yeon; Kim, Seon-Young; Kim, Jae-Min; Shin, Il-Seon; Yoon, Jin-Sang

2017-05-18

This article describes the development of the smartphone application for cognitive-behavioural case management of young individuals with early psychosis and examines the acceptance and potential clinical benefits of this application through a pilot survey. Gwangju Bukgu-Community Mental Health Center developed and launched a smartphone application (Heal Your Mind [HYM]) for cognitive-behavioural case management and symptom monitoring. The HYM application for clients includes 6 main modules including thought record, symptom record, daily life record, official notices, communication and scales. The key module is the "thought record" for self-directed cognitive-behavioural treatment. When the client writes and sends the self-cognitive-behavioural therapy sheet to the case manager, the latter receives a notification and can provide feedback in real time. We conducted a survey to investigate the acceptance and feasibility of this approach among young clients with early psychosis. A total of 24 clients with early psychosis participated in this survey. More than 80% of participants reported that it was easy to learn to use this application, and no one described this application as very complicated or reported that they needed a long time to learn how to use it. About 80% of participants were satisfied with this application, and 70% reported that they received help as a result of using this application. This study suggests that this smartphone application is useful for young individuals with early psychosis and that it may contribute to the development of both young customer- and case manager-friendly systems for this clinical population. © 2017 John Wiley & Sons Australia, Ltd.

Application of Multi-Analyte Methods for Pesticide Formulations

Energy Technology Data Exchange (ETDEWEB)

Lantos, J.; Virtics, I. [Plant Protection & Soil Conservation Service of Szabolcs-Szatmár-Bereg County, Nyíregyháza (Hungary)

2009-07-15

The application of multi-analyte methods for pesticide formulations by GC analysis is discussed. HPLC was used to determine active ingredients. HPLC elution sequences were related to individual n-octanol/water partition coefficients. Real laboratory data are presented and evaluated with regard to validation requirements. The retention time data of pesticides on different HPLC columns under gradient and isocratic conditions are compared to illustrate the applicability of the methodologies. (author)

Application of RI-counting method for posttraumatic CSF rhinorrhea

International Nuclear Information System (INIS)

Itoh, Takahiko; Terai, Yoshinori; Fujimoto, Shunichiro; Kawauchi, Masamitsu.

1987-01-01

Numerous techniques and procedures have been reported for the evaluation of CSF fistulas. Especially metrizamide CT cisternography and radioisotope (RI) cisternography have been reported to be reliable for localizing the site of CSF leakage, however, it has been difficult to diagnose the existence and the site of CSF leakages in some cases. RI-counting method, measuring RI-count of intranasal cotton pledgets after the intrathecal injection of RI ( 111 In-DTPA) is thought to be the most reliable method for detecting the presence of CSF leakage in these cases. We used six cotton pledgets which were inserted into upper, middle, and lower meatuses on both side. Because the site of pledgets with ghest RI-count has anatomical relationship to the opening of the paranasal sinus, we can surmise the leakage of dural defect and CSF leakage. RI counting method was applied to two patients in whom it was difficult to diagnose the presence of CSF leakage with other procedures. The patients were free in position for four hours after the intrathecal injection of RI, and in the prone position for 30 minutes before RI-counting of intranasal cotton pledgets. After measuring the RI-counts of six pledgets, the counts were compared with each other. The cotton pledget inserted into left middle meatus showed the highest count in both cases. From this result and finding of conventional skull tomography we speculated the site of CSF leakage to be frontal sinus or ethmoid sinus. Operation demonstrated the opening of dura into the frontal sinus in one case, and ethmoid sinus in another case. As mentioned above, RI-counting method has the advantages of detecting the existence and the site of CSF leakage. (author)

Application of numerical methods to the determination of molecular wave functions

International Nuclear Information System (INIS)

Douady, Jerome

1969-01-01

A simplified SCF Method is developed. The wave function of molecular systems and spin densities in the case of free radicals are computed from geometrical data. This method, including at the beginning a delocalization of electrons over all the molecular system, two methods which clear out bonding and anti-bonding interactions have been studied and programmed: a) overlap population analysis, b) localisation of molecular orbitals. These methods have been carried out in the case of organic compounds and free radicals. (author) [fr

4th Workshop on Combinations of Intelligent Methods and Applications

CERN Document Server

Palade, Vasile; Prentzas, Jim

2016-01-01

This volume includes extended and revised versions of the papers presented at the 4th Workshop on “Combinations of Intelligent Methods and Applications” (CIMA 2014) which was intended to become a forum for exchanging experience and ideas among researchers and practitioners dealing with combinations of different intelligent methods in Artificial Intelligence. The aim is to create integrated or hybrid methods that benefit from each of their components. Some of the existing presented efforts combine soft computing methods (fuzzy logic, neural networks and genetic algorithms). Another stream of efforts integrates case-based reasoning or machine learning with soft-computing methods. Some of the combinations have been more widely explored, like neuro-symbolic methods, neuro-fuzzy methods and methods combining rule-based and case-based reasoning. CIMA 2014 was held in conjunction with the 26th IEEE International Conference on Tools with Artificial Intelligence (ICTAI 2014). .

A method to improve application technique in Alanine/ESR dosimetry

International Nuclear Information System (INIS)

Choi, Hoon; Ha, Ju Hee; Choi, Won; Lim, Young Khi

2008-01-01

Full text: For long-term radiation monitoring to assess the cable aging in harsh condition of nuclear power plant, ESR dosimetry method using alanine dosimeters was already recommended in many technical document and paper. Several ESR dosimetry systems were already produced and used widely, but the actual application of these systems for industrial dosimetry needs careful consideration of error sources in process of dose measurement. The alanine dosimeters were measured by E-scan alanine analyzer system or EMX ESR spectrometer. For the accurate measurement of the dosimeters, we have studied various source of errors. First, this paper discusses sources of inaccuracy related to data processing. To make a meaningful dose assessment, the dosimeter measurements need to be compared with measurements made using certified dosimeters of known dose. This is achieved by performing the routine calibration procedure which creates a calibration curve and corresponding fit coefficients from measurements made with a set of dosimeters with known certified dose. The calibration curves in ESR dosimetry are usually constructed by means of the least-squares technique in its simplest variant. The recommended alternative linearity several replicate measurements of Y at each used X value. Also, measurement is subject to error, so repeat measurements will not be identical. A technical description of a linear calibration is assumed that the dispersion of the measurements is the same for each standard. But in some cases, the standard deviation has to be specified separately for each value of concentration. In this case, it used the WLS (Weighted Least-Squared Regression) method instead of the OLS (Ordinary Least-Squared Regression) method. Second, the precision of the ESR spectrum was showed as a reproducibility test for the two ESR systems. The reproducibility test was performed at an absorbed dose of 1 k Gy, which is at least three orders of magnitude above the background reading of an

Nanosilicon properties, synthesis, applications, methods of analysis and control

CERN Document Server

Ischenko, Anatoly A; Aslalnov, Leonid A

2015-01-01

Nanosilicon: Properties, Synthesis, Applications, Methods of Analysis and Control examines the latest developments on the physics and chemistry of nanosilicon. The book focuses on methods for producing nanosilicon, its electronic and optical properties, research methods to characterize its spectral and structural properties, and its possible applications. The first part of the book covers the basic properties of semiconductors, including causes of the size dependence of the properties, structural and electronic properties, and physical characteristics of the various forms of silicon. It presents theoretical and experimental research results as well as examples of porous silicon and quantum dots. The second part discusses the synthesis of nanosilicon, modification of the surface of nanoparticles, and properties of the resulting particles. The authors give special attention to the photoluminescence of silicon nanoparticles. The third part describes methods used for studying and controlling the structure and pro...

Morals, Metaphysics and The Method of Cases | Beck | South ...

African Journals Online (AJOL)

In this paper I discuss a set of problems concerning the method of cases as it is used in applied ethics and in the metaphysical debate about personal identity. These problems stem from research in social psychology concerning our access to the data with which the method operates. I argue that the issues facing ethics are ...

An Application of a Stochastic Semi-Continuous Simulation Method for Flood Frequency Analysis: A Case Study in Slovakia

Science.gov (United States)

Valent, Peter; Paquet, Emmanuel

2017-09-01

A reliable estimate of extreme flood characteristics has always been an active topic in hydrological research. Over the decades a large number of approaches and their modifications have been proposed and used, with various methods utilizing continuous simulation of catchment runoff, being the subject of the most intensive research in the last decade. In this paper a new and promising stochastic semi-continuous method is used to estimate extreme discharges in two mountainous Slovak catchments of the rivers Váh and Hron, in which snow-melt processes need to be taken into account. The SCHADEX method used, couples a precipitation probabilistic model with a rainfall-runoff model used to both continuously simulate catchment hydrological conditions and to transform generated synthetic rainfall events into corresponding discharges. The stochastic nature of the method means that a wide range of synthetic rainfall events were simulated on various historical catchment conditions, taking into account not only the saturation of soil, but also the amount of snow accumulated in the catchment. The results showed that the SCHADEX extreme discharge estimates with return periods of up to 100 years were comparable to those estimated by statistical approaches. In addition, two reconstructed historical floods with corresponding return periods of 100 and 1000 years were compared to the SCHADEX estimates. The results confirmed the usability of the method for estimating design discharges with a recurrence interval of more than 100 years and its applicability in Slovak conditions.

On the importance of methods in hydrological modelling. Perspectives from a case study

Science.gov (United States)

Fenicia, Fabrizio; Kavetski, Dmitri

2017-04-01

The hydrological community generally appreciates that developing any non-trivial hydrological model requires a multitude of modelling choices. These choices may range from a (seemingly) straightforward application of mass conservation, to the (often) guesswork-like selection of constitutive functions, parameter values, etc. The application of a model itself requires a myriad of methodological choices - the selection of numerical solvers, objective functions for model calibration, validation approaches, performance metrics, etc. Not unreasonably, hydrologists embarking on ever ambitious projects prioritize hydrological insight over the morass of methodological choices. Perhaps to emphasize "ideas" over "methods", some journals have even reduced the fontsize of the methodology sections of its articles. However, the very nature of modelling is that seemingly routine methodological choices can significantly affect the conclusions of case studies and investigations - making it dangerous to skimp over methodological details in an enthusiastic rush towards the next great hydrological idea. This talk shares modelling insights from a hydrological study of a 300 km2 catchment in Luxembourg, where the diversity of hydrograph dynamics observed at 10 locations begs the question of whether external forcings or internal catchment properties act as dominant controls on streamflow generation. The hydrological insights are fascinating (at least to us), but in this talk we emphasize the impact of modelling methodology on case study conclusions and recommendations. How did we construct our prior set of hydrological model hypotheses? What numerical solver was implemented and why was an objective function based on Bayesian theory deployed? And what would have happened had we omitted model cross-validation, or not used a systematic hypothesis testing approach?

New Lagrange Multipliers for the Blind Adaptive Deconvolution Problem Applicable for the Noisy Case

Directory of Open Access Journals (Sweden)

Monika Pinchas

2016-02-01

Full Text Available Recently, a new blind adaptive deconvolution algorithm was proposed based on a new closed-form approximated expression for the conditional expectation (the expectation of the source input given the equalized or deconvolutional output where the output and input probability density function (pdf of the deconvolutional process were approximated with the maximum entropy density approximation technique. The Lagrange multipliers for the output pdf were set to those used for the input pdf. Although this new blind adaptive deconvolution method has been shown to have improved equalization performance compared to the maximum entropy blind adaptive deconvolution algorithm recently proposed by the same author, it is not applicable for the very noisy case. In this paper, we derive new Lagrange multipliers for the output and input pdfs, where the Lagrange multipliers related to the output pdf are a function of the channel noise power. Simulation results indicate that the newly obtained blind adaptive deconvolution algorithm using these new Lagrange multipliers is robust to signal-to-noise ratios (SNR, unlike the previously proposed method, and is applicable for the whole range of SNR down to 7 dB. In addition, we also obtain new closed-form approximated expressions for the conditional expectation and mean square error (MSE.

New methods and applications in emission spectroscopy (1960); Methodes et applications nouvelles en spectroscopie d'emission (1960)

Energy Technology Data Exchange (ETDEWEB)

Baudin, G [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

1960-07-01

Emission spectroscopy, are already well-established instrumental analytical technique, has in recent years known important developments. Two mains factors are responsible; firstly the demands of metallurgy for purer and purer materials or alloys which are increasingly complex and difficult to analyse by chemical means; secondly, progress in optics, especially in the production of gratings, and in electronics in the field of photomultiplier tubes. We will not here catalogue all the new applications and methods, but we will consider a few amongst the most representative outside the conventional field. (author) [French] La spectroscopie d'emission, technique analytique instrumentale deja ancienne, a pris, depuis quelques annees, une extension notable. Deux facteurs principaux ont contribue a ce succes: d'une part, l'exigence de la metallurgie en materiaux de plus en plus pur ou en alliages de plus en plus complexes, difficiles a analyser chimiquement, d'autre part, les progres realises en optique, principalement dans la fabrication des reseaux, et en electronique dans le domaine des tubes photomultiplicateurs. Nous ne ferons pas ici le recensement de toutes les applications ou methodes nouvelles, mais nous en choisirons quelques unes des plus representatives hors du domaine classique. (auteur)

Application of a Perturbation Method for Realistic Dynamic Simulation of Industrial Robots

International Nuclear Information System (INIS)

Waiboer, R. R.; Aarts, R. G. K. M.; Jonker, J. B.

2005-01-01

This paper presents the application of a perturbation method for the closed-loop dynamic simulation of a rigid-link manipulator with joint friction. In this method the perturbed motion of the manipulator is modelled as a first-order perturbation of the nominal manipulator motion. A non-linear finite element method is used to formulate the dynamic equations of the manipulator mechanism. In a closed-loop simulation the driving torques are generated by the control system. Friction torques at the actuator joints are introduced at the stage of perturbed dynamics. For a mathematical model of the friction torques we implemented the LuGre friction model that accounts both for the sliding and pre-sliding regime. To illustrate the method, the motion of a six-axes industrial Staeubli robot is simulated. The manipulation task implies transferring a laser spot along a straight line with a trapezoidal velocity profile. The computed trajectory tracking errors are compared with measured values, where in both cases the tip position is computed from the joint angles using a nominal kinematic robot model. It is found that a closed-loop simulation using a non-linear finite element model of this robot is very time-consuming due to the small time step of the discrete controller. Using the perturbation method with the linearised model a substantial reduction of the computer time is achieved without loss of accuracy

A new method for calibrating perceptual salience across dimensions in infants: the case of color vs. luminance.

Science.gov (United States)

Kaldy, Zsuzsa; Blaser, Erik A; Leslie, Alan M

2006-09-01

We report a new method for calibrating differences in perceptual salience across feature dimensions, in infants. The problem of inter-dimensional salience arises in many areas of infant studies, but a general method for addressing the problem has not previously been described. Our method is based on a preferential looking paradigm, adapted to determine the relative salience of two stimuli. We report here on the case of stimuli differing in color and luminance, though the method has wider potential. We were able to determine on a psychophysical curve the point at which a color contrast was equally salient to infants as a given luminance contrast. We then used these calibrated, 'iso-salient' stimuli in an object memory study. Results showed that 6.5-month-old infants noticed a color, but not a luminance, change while tracking an occluded object. Our method should have numerous applications in the study of bottom-up effects on infant attention and visual working memory.

The Presentation of Self in Letters of Application: A Mixed-Method Approach

Science.gov (United States)

Soroko, Emilia

2012-01-01

The application letter, as the first phase of employment-seeking, is an opportunity for a job applicant to make a favorable impression on a potential employer. In the current study, the author used a mixed-method approach to empirically explore strategies for self-presentation in job application letters and determine the methods used in the…

Application of the “best representativity” method to a PWR fuel calculation using the critical experiments at the Toshiba NCA facility

International Nuclear Information System (INIS)

Umano, Takuya; Yoshioka, Kenichi; Obara, Toru

2015-01-01

Highlights: • Calculation procedures are easier than those of the cross-section adjustment method. • In addition, few cases of experimental results, two or three cases for example, can be well managed with the method. • Different from the bias factor method, a representativity factor is simultaneously obtained to know the whole quality of utilized experiments. • After easier process of calculations, it is possible to obtain a correction value of a particular physical property with the method. • Our proposed method was considered to be applicable to the correction of the infinite neutron multiplication factor in LWR studies. - Abstract: To judge the applicability of a critical experiment, it is necessary to confirm the similarities of the experiment with actual reactor conditions or equipment. The concept of the “representativity factor” has been well adopted since the late 1970’s, particularly for fast breeder reactors (FBRs) and future reactor studies. In our previous study, we extended this concept to the design of a light water reactor (LWR) system, and derived mathematical formulas for a new numerical evaluation method to correct a physical property of a target system. This method is different from the cross-section adjustment method and the bias factor method. For the first qualification of the method, sample calculations were carried out to correct the effective neutron multiplication factor through critical experiments at the Toshiba Nuclear Critical Assembly (NCA) facility. We also compared the result with that of the Product of Exponentiated experimental values method (PE method) of the extended bias factor methods. A good agreement was observed. The purpose of this study was to demonstrate the applicability of the method to the infinite neutron multiplication factor. Using the method and three kinds of critical experiments of NCA, calculations were performed to correct the infinite neutron multiplication factor of a pressurized water

The application of statistical methods to assess economic assets

Directory of Open Access Journals (Sweden)

D. V. Dianov

2017-01-01

Full Text Available The article is devoted to consideration and evaluation of machinery, equipment and special equipment, methodological aspects of the use of standards for assessment of buildings and structures in current prices, the valuation of residential, specialized houses, office premises, assessment and reassessment of existing and inactive military assets, the application of statistical methods to obtain the relevant cost estimates.The objective of the scientific article is to consider possible application of statistical tools in the valuation of the assets, composing the core group of elements of national wealth – the fixed assets. Firstly, capital tangible assets constitute the basis of material base of a new value creation, products and non-financial services. The gain, accumulated of tangible assets of a capital nature is a part of the gross domestic product, and from its volume and specific weight in the composition of GDP we can judge the scope of reproductive processes in the country.Based on the methodological materials of the state statistics bodies of the Russian Federation, regulations of the theory of statistics, which describe the methods of statistical analysis such as the index, average values, regression, the methodical approach is structured in the application of statistical tools to obtain value estimates of property, plant and equipment with significant accumulated depreciation. Until now, the use of statistical methodology in the practice of economic assessment of assets is only fragmentary. This applies to both Federal Legislation (Federal law № 135 «On valuation activities in the Russian Federation» dated 16.07.1998 in edition 05.07.2016 and the methodological documents and regulations of the estimated activities, in particular, the valuation activities’ standards. A particular problem is the use of a digital database of Rosstat (Federal State Statistics Service, as to the specific fixed assets the comparison should be carried

A Case Study Application Of Time Study Model In Paint ...

African Journals Online (AJOL)

This paper presents a case study in the development and application of a time study model in a paint manufacturing company. The organization specializes in the production of different grades of paint and paint containers. The paint production activities include; weighing of raw materials, drying of raw materials, dissolving ...

An evaluation of applicability of seismic refraction method in identifying shallow archaeological features A case study at archaeological site

Science.gov (United States)

Jahangardi, Morteza; Hafezi Moghaddas, Naser; Keivan Hosseini, Sayyed; Garazhian, Omran

2015-04-01

We applied the seismic refraction method at archaeological site, Tepe Damghani located in Sabzevar, NE of Iran, in order to determine the structures of archaeological interests. This pre-historical site has special conditions with respect to geographical location and geomorphological setting, so it is an urban archaeological site, and in recent years it has been used as an agricultural field. In spring and summer of 2012, the third season of archaeological excavation was carried out. Test trenches of excavations in this site revealed that cultural layers were often disturbed adversely due to human activities such as farming and road construction in recent years. Conditions of archaeological cultural layers in southern and eastern parts of Tepe are slightly better, for instance, in test trench 3×3 m²1S03, third test trench excavated in the southern part of Tepe, an adobe in situ architectural structure was discovered that likely belongs to cultural features of a complex with 5 graves. After conclusion of the third season of archaeological excavation, all of the test trenches were filled with the same soil of excavated test trenches. Seismic refraction method was applied with12 channels of P geophones in three lines with a geophone interval of 0.5 meter and a 1.5 meter distance between profiles on test trench 1S03. The goal of this operation was evaluation of applicability of seismic method in identification of archaeological features, especially adobe wall structures. Processing of seismic data was done with the seismic software, SiesImager. Results were presented in the form of seismic section for every profile, so that identification of adobe wall structures was achieved hardly. This could be due to that adobe wall had been built with the same materials of the natural surrounding earth. Thus, there is a low contrast and it has an inappropriate effect on seismic processing and identifying of archaeological features. Hence the result could be that application of

Acute Intoxication by Transdermal Opium Application in Infants: Two Case Reports

Directory of Open Access Journals (Sweden)

Iraj Sedighi

2012-05-01

Full Text Available Background: Acute opium intoxication is one of the most common causes of poisoning in children in Iran. Although most cases are accidental, traditional misuse of opium for symptomatic therapy of various childhood diseases also contributes to high rate of opium intoxication in Iran. Cases: Here, we report two cases of opium intoxication in infants resulted from transdermal application of opium on burned skin. To our knowledge this is the first case report of intoxication from transdermal misuse of opium. Conclusion: Health care providers should be aware about signs and symptoms of opium intoxication in children. Opium intoxication should be suspected in each child with history of a recent burn injury that presented with decreased level of consciousness.

Application of reliability methods in Ontario Hydro

International Nuclear Information System (INIS)

Jeppesen, R.; Ravishankar, T.J.

1985-01-01

Ontario Hydro have established a reliability program in support of its substantial nuclear program. Application of the reliability program to achieve both production and safety goals is described. The value of such a reliability program is evident in the record of Ontario Hydro's operating nuclear stations. The factors which have contributed to the success of the reliability program are identified as line management's commitment to reliability; selective and judicious application of reliability methods; establishing performance goals and monitoring the in-service performance; and collection, distribution, review and utilization of performance information to facilitate cost-effective achievement of goals and improvements. (orig.)

HIV quality report cards: impact of case-mix adjustment and statistical methods.

Science.gov (United States)

Ohl, Michael E; Richardson, Kelly K; Goto, Michihiko; Vaughan-Sarrazin, Mary; Schweizer, Marin L; Perencevich, Eli N

2014-10-15

There will be increasing pressure to publicly report and rank the performance of healthcare systems on human immunodeficiency virus (HIV) quality measures. To inform discussion of public reporting, we evaluated the influence of case-mix adjustment when ranking individual care systems on the viral control quality measure. We used data from the Veterans Health Administration (VHA) HIV Clinical Case Registry and administrative databases to estimate case-mix adjusted viral control for 91 local systems caring for 12 368 patients. We compared results using 2 adjustment methods, the observed-to-expected estimator and the risk-standardized ratio. Overall, 10 913 patients (88.2%) achieved viral control (viral load ≤400 copies/mL). Prior to case-mix adjustment, system-level viral control ranged from 51% to 100%. Seventeen (19%) systems were labeled as low outliers (performance significantly below the overall mean) and 11 (12%) as high outliers. Adjustment for case mix (patient demographics, comorbidity, CD4 nadir, time on therapy, and income from VHA administrative databases) reduced the number of low outliers by approximately one-third, but results differed by method. The adjustment model had moderate discrimination (c statistic = 0.66), suggesting potential for unadjusted risk when using administrative data to measure case mix. Case-mix adjustment affects rankings of care systems on the viral control quality measure. Given the sensitivity of rankings to selection of case-mix adjustment methods-and potential for unadjusted risk when using variables limited to current administrative databases-the HIV care community should explore optimal methods for case-mix adjustment before moving forward with public reporting. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Development and application of advanced methods for electronic structure calculations

DEFF Research Database (Denmark)

Schmidt, Per Simmendefeldt

. For this reason, part of this thesis relates to developing and applying a new method for constructing so-called norm-conserving PAW setups, that are applicable to GW calculations by using a genetic algorithm. The effect of applying the new setups significantly affects the absolute band positions, both for bulk......This thesis relates to improvements and applications of beyond-DFT methods for electronic structure calculations that are applied in computational material science. The improvements are of both technical and principal character. The well-known GW approximation is optimized for accurate calculations...... of electronic excitations in two-dimensional materials by exploiting exact limits of the screened Coulomb potential. This approach reduces the computational time by an order of magnitude, enabling large scale applications. The GW method is further improved by including so-called vertex corrections. This turns...

Using case method to explicitly teach formative assessment in preservice teacher science education

Science.gov (United States)

Bentz, Amy Elizabeth

The process of formative assessment improves student understanding; however, the topic of formative assessment in preservice education has been severely neglected. Since a major goal of teacher education is to create reflective teaching professionals, preservice teachers should be provided an opportunity to critically reflect on the use of formative assessment in the classroom. Case method is an instructional methodology that allows learners to engage in and reflect on real-world situations. Case based pedagogy can play an important role in enhancing preservice teachers' ability to reflect on teaching and learning by encouraging alternative ways of thinking about assessment. Although the literature on formative assessment and case methodology are extensive, using case method to explore the formative assessment process is, at best, sparse. The purpose of this study is to answer the following research questions: To what extent does the implementation of formative assessment cases in methods instruction influence preservice elementary science teachers' knowledge of formative assessment? What descriptive characteristics change between the preservice teachers' pre-case and post-case written reflection that would demonstrate learning had occurred? To investigate these questions, preservice teachers in an elementary methods course were asked to reflect on and discuss five cases. Pre/post-case data was analyzed. Results indicate that the preservice teachers modified their ideas to reflect the themes that were represented within the cases and modified their reflections to include specific ideas or examples taken directly from the case discussions. Comparing pre- and post-case reflections, the data supports a noted change in how the preservice teachers interpreted the case content. The preservice teachers began to evaluate the case content, question the lack of formative assessment concepts and strategies within the case, and apply formative assessment concepts and

Key techniques and risk management for the application of the Pile-Beam-Arch (PBA) excavation method: a case study of the Zhongjie subway station.

Science.gov (United States)

Guan, Yong-ping; Zhao, Wen; Li, Shen-gang; Zhang, Guo-bin

2014-01-01

The design and construction of shallow-buried tunnels in densely populated urban areas involve many challenges. The ground movements induced by tunneling effects pose potential risks to infrastructure such as surface buildings, pipelines, and roads. In this paper, a case study of the Zhongjie subway station located in Shenyang, China, is examined to investigate the key construction techniques and the influence of the Pile-Beam-Arch (PBA) excavation method on the surrounding environment. This case study discusses the primary risk factors affecting the environmental safety and summarizes the corresponding risk mitigation measures and key techniques for subway station construction using the PBA excavation method in a densely populated urban area.

EPR of free radicals in solids II trends in methods and applications

CERN Document Server

Lund, Anders; Lund, Anders

2012-01-01

EPR of Free Radicals in Solids: Trends in Methods and Applications, 2nd ed. presents a critical two volume review of the methods and applications of EPR (ESR) for the study of free radical processes in solids. Emphasis is on the progress made in the developments in EPR technology, in the application of sophisticated matrix isolation techniques and in the advancement in quantitative EPR that have occurred since the 1st edition was published. Improvements have been made also at theoretical level, with the development of methods based on first principles and their application to the calculation of magnetic properties as well as in spectral simulations. EPR of Free Radicals in Solids II focuses on the trends in applications of experimental and theoretical methods to extract structural and dynamical properties of radicals and spin probes in solid matrices by continuous wave (CW) and pulsed techniques in nine chapters written by experts in the field. It examines the studies involving radiation- and photo-induced in...

Hesitant Trapezoidal Fuzzy QUALIFLEX Method and Its Application in the Evaluation of Green Supply Chain Initiatives

Directory of Open Access Journals (Sweden)

Xiaolu Zhang

2016-09-01

Full Text Available This paper explores how to handle multiple criteria decision-making (MCDM problems in which the criteria values of alternatives take the form of comparative linguistic expressions. Firstly, the new concept of hesitant trapezoidal fuzzy numbers (HTrFNs is provided to model the semantics of the comparative linguistic expressions. Then, the operational laws and the distance measures of HTrFNs are presented. Afterwards, a useful outranking method, the hesitant trapezoidal fuzzy QUALIFLEX method, is developed to handle the MCDM problems with hierarchical structure in the environment of HTrFN. At length, the proposed method is applied to evaluating green supply chain initiatives in order to achieve sustainable economic and environmental performance, and a case study concerned with a fashion retail chain is presented to demonstrate its feasibility and applicability, also, a comparative analysis with other relevant approaches is conducted to validate the effectiveness of the proposed method.

An application of the explicit method for analysing intersystem dependencies in the evaluation of event trees

International Nuclear Information System (INIS)

Oliveira, L.F.S. de; Frutuoso e Melo, P.F.F.; Lima, J.E.P.; Stal, I.L.

1985-01-01

A computacional application of the explicit method for analyzing event trees in the context of probabilistic risk assessments is discussed. A detailed analysis of the explicit method is presented, including the train level analysis (TLA) of safety systems and the impact vector method. It is shown that the penalty for not adopting TLA is that in some cases non-conservative results may be reached. The impact vector method can significantly reduce the number of sequences to be considered, and its use has inspired the definition of a dependency matrix, which enables the proper running of a computer code especially developed for analysing event trees. The code has been extensively used in the Angra 1 PRA currently underway. In its present version it gives as output the dominant sequences for each given initiator, properly classiying them in core-degradation classes as specified by the user. (Author) [pt

Mobile/android application for QRS detection using zero cross method

Science.gov (United States)

Rizqyawan, M. I.; Simbolon, A. I.; Suhendra, M. A.; Amri, M. F.; Kusumandari, D. E.

2018-03-01

In automatic ECG signal processing, one of the main topics of research is QRS complex detection. Detecting correct QRS complex or R peak is important since it is used to measure several other ECG metrics. One of the robust methods for QRS detection is Zero Cross method. This method uses an addition of high-frequency signal and zero crossing count to detect QRS complex which has a low-frequency oscillation. This paper presents an application of QRS detection using Zero Cross algorithm in the Android-based system. The performance of the algorithm in the mobile environment is measured. The result shows that this method is suitable for real-time QRS detection in a mobile application.

Overview of INAA method and its application in Malaysia

International Nuclear Information System (INIS)

Yavar, A.R.; Sarmani, S.B.; Khalafi, H.; Abdul Khalik Wood; Khoo, K.S.

2011-01-01

Present work shows the development of nuclear technology in Malaysia and highlights its applications that have been developed by using the instrumental neutron activation analysis (INAA) method. In addition, present study exhibits a comprehensive review of INAA for calculation of neutron flux parameters and concentration of elements. The INAA is a powerful method to analyse the sample which identifies qualitative and quantitative of elements present in a sample. The INAA is a working instrument with advantages of experimental simplicity, high accuracy, excellent flexibility with respect to irradiation and counting conditions, and suitability for computerization. In INAA, sample is irradiated and measured directly. In practical, INAA is based on an absolute, relative and single-comparator standardisation method.The INAA has been developed since 1982 when the TRIGA Mark II reactor of Malaysia has commissioned. The absolute method was less utilised, the relative method has been used since 1982, and the k 0 -INAA method is derived from single-comparator standardization method has been developed since 1996 in Malaysian. The relative method, because of its advantages, such as high accuracy, easy for using, has the most application in Malaysia. Currently, local Universities and Malaysian Nuclear Agency (MNA) research reactor use INAA method in Malaysia. (Author)

Overview of INAA Method and Its Application in Malaysia

International Nuclear Information System (INIS)

Yavar, A.R.; Sarmani, S.B.; Khalafi, H.; Wood, A.K.; Khoo, K.S.

2015-01-01

Present work shows the development of nuclear technology in Malaysia and highlights its applications that have been developed by using the instrumental neutron activation analysis (INAA) method. In addition, present study exhibits a comprehensive review of INAA for calculation of neutron flux parameters and concentration of elements. The INAA is a powerful method to analyse the sample which identifies qualitative and quantitative of elements present in a sample. The INAA is a working instrument with advantages of experimental simplicity, high accuracy, excellent flexibility with respect to irradiation and counting conditions, and suitability for computerization. In INAA, sample is irradiated and measured directly. In practical, INAA is based on an absolute, relative and single-comparator standardisation method. The INAA has been developed since 1982 when the TRIGA MARK II reactor of Malaysia has commissioned. The absolute method was less utilised, the relative method has been used since 1982, and the k_0-INAA method is derived from single-comparator standardization method has been developed since 1996 in Malaysia. The relative method, because of its advantages, such as high accuracy, easy for using, has the most application in Malaysia. Currently, local Universities and Malaysian Nuclear Agency (MNA) research reactor use INAA method in Malaysia. (author)

Application of heterogeneous method for the interpretation of exponential experiments

International Nuclear Information System (INIS)

Birkhoff, G.; Bondar, L.

1977-01-01

The present paper gives a brief review of a work which was executed mainly during 1967 and 1968 in the field of the application of heterogeneous methods for the interpretation of exponential experiments with ORGEL type lattices (lattices of natural uranium cluster elements with organic coolants moderated by heavy water). In the frame of this work a heterogeneous computer program, in (r,γ) geometry was written which is based on the NORDHEIM method using a uniform moderator, three energy groups and monopol and dipol sources. This code is especially adapted for regular square lattices in a cylindrical tank. Full use of lattice symmetry was made for reducing the numerical job of the theory. A further reduction was obtained by introducing a group averaged extrapolation distance at the external boundary. Channel parameters were evaluated by the PINOCCHIO code. Comparisons of calculated and measured thermal neutron flux showed good agreement. Equivalence of heterogeneous and homogeneous theory was found in cases of lattices comprising a minimum of 32, 24 and 16 fuel elements for respectively under-, well-, and over-moderated lattices. Heterogeneous calculations of high leakage lattices suffered the lack of good methods for the computation of axial and radial streaming parameters. Interpretation of buckling measurements in the subcritical facility EXPO requires already more accurate evaluation of the streaming effects than we made. The potential of heterogeneous theory in the field of exponential experiments is thought to be limited by the precision by which the streaming parameters can be calculated

Big data analytics methods and applications

CERN Document Server

Rao, BLS; Rao, SB

2016-01-01

This book has a collection of articles written by Big Data experts to describe some of the cutting-edge methods and applications from their respective areas of interest, and provides the reader with a detailed overview of the field of Big Data Analytics as it is practiced today. The chapters cover technical aspects of key areas that generate and use Big Data such as management and finance; medicine and healthcare; genome, cytome and microbiome; graphs and networks; Internet of Things; Big Data standards; bench-marking of systems; and others. In addition to different applications, key algorithmic approaches such as graph partitioning, clustering and finite mixture modelling of high-dimensional data are also covered. The varied collection of themes in this volume introduces the reader to the richness of the emerging field of Big Data Analytics.

Selecting the patients for morning report sessions: case-based vs. conventional method.

Science.gov (United States)

Rabiei, Mehdi; Saeidi, Masumeh; Kiani, Mohammad Ali; Amin, Sakineh Mohebi; Ahanchian, Hamid; Jafari, Seyed Ali; Kianifar, Hamidreza

2015-08-01

One of the most important issues in morning report sessions is the number of patients. The aim of this study was to investigate and compare the number of cases reported in the morning report sessions in terms of case-based and conventional methods from the perspective of pediatric residents of Mashhad University of Medical Sciences. The present study was conducted on 24 pediatric residents of Mashhad University of Medical Sciences in the academic year 2014-2015. In this survey, the residents replied to a 20-question researcher-made questionnaire that had been designed to measure the views of residents regarding the number of patients in the morning report sessions using case-based and conventional methods. The validity of the questionnaire was confirmed by experts' views and its reliability by calculating Cronbach's alpha coefficients. Data were analyzed by t-test analysis. The mean age of the residents was 30.852 ± 2.506, and 66.6% of them were female. The results showed that there was no significant relationship among the variables of academic year, gender, and residents' perspective to choosing the number of patients in the morning report sessions (P > 0.05). T-test analysis showed a significant relationship among the average scores of residents in the selection of the case-based method in comparison to the conventional method (P case-based morning report was preferred compared to the conventional method. This method makes residents pay more attention to the details of patients' issues and therefore helps them to better plan how to address patient problems and improve their differential diagnosis skills.

Application of the digital image correlation method in the study of cohesive coarse soil deformations

Science.gov (United States)

Kogut, Janusz P.; Tekieli, Marcin

2018-04-01

Non-contact video measurement methods are used to extend the capabilities of standard measurement systems, based on strain gauges or accelerometers. In most cases, they are able to provide more accurate information about the material or construction being tested than traditional sensors, while maintaining a high resolution and measurement stability. With the use of optical methods, it is possible to generate a full field of displacement on the surface of the test sample. The displacement value is the basic (primary) value determined using optical methods, and it is possible to determine the size of the derivative in the form of a sample deformation. This paper presents the application of a non-contact optical method to investigate the deformation of coarse soil material. For this type of soil, it is particularly difficult to obtain basic strength parameters. The use of a non-contact optical method, followed by a digital image correlation (DIC) study of the sample obtained during the tests, effectively completes the description of the behaviour of this type of material.

Application of GESPECOR software for the calculation of coincidence summing effects in special cases

International Nuclear Information System (INIS)

Arnold, Dirk; Sima, Octavian

2004-01-01

In this work, coincidence summing correction factors have been measured for 133 Ba, 152 Eu and 88 Y point sources with a 50% relative efficiency p-type detector and a 25% relative efficiency n-type detector in two close-to-detector measurement geometries. The experimental data for 133 Ba and 152 Eu and the results obtained with the GESPECOR software reveal a complex structure of the conventional dead layer of the p-type detector. The high value of the coincidence summing correction factor for the 511 keV peak of 88 Y, in agreement with the values computed by GESPECOR, in this case cautions against the application of the semiempirical method for evaluating coincidence summing effects

Case-Crossover Analysis of Air Pollution Health Effects: A Systematic Review of Methodology and Application

Science.gov (United States)

Carracedo-Martínez, Eduardo; Taracido, Margarita; Tobias, Aurelio; Saez, Marc; Figueiras, Adolfo

2010-01-01

Background Case-crossover is one of the most used designs for analyzing the health-related effects of air pollution. Nevertheless, no one has reviewed its application and methodology in this context. Objective We conducted a systematic review of case-crossover (CCO) designs used to study the relationship between air pollution and morbidity and mortality, from the standpoint of methodology and application. Data sources and extraction A search was made of the MEDLINE and EMBASE databases. Reports were classified as methodologic or applied. From the latter, the following information was extracted: author, study location, year, type of population (general or patients), dependent variable(s), independent variable(s), type of CCO design, and whether effect modification was analyzed for variables at the individual level. Data synthesis The review covered 105 reports that fulfilled the inclusion criteria. Of these, 24 addressed methodological aspects, and the remainder involved the design’s application. In the methodological reports, the designs that yielded the best results in simulation were symmetric bidirectional CCO and time-stratified CCO. Furthermore, we observed an increase across time in the use of certain CCO designs, mainly symmetric bidirectional and time-stratified CCO. The dependent variables most frequently analyzed were those relating to hospital morbidity; the pollutants most often studied were those linked to particulate matter. Among the CCO-application reports, 13.6% studied effect modification for variables at the individual level. Conclusions The use of CCO designs has undergone considerable growth; the most widely used designs were those that yielded better results in simulation studies: symmetric bidirectional and time-stratified CCO. However, the advantages of CCO as a method of analysis of variables at the individual level are put to little use. PMID:20356818

Analytical and numerical study of validation test-cases for multi-physic problems: application to magneto-hydro-dynamic

Directory of Open Access Journals (Sweden)

D Cébron

2016-04-01

Full Text Available The present paper is concerned with the numerical simulation of Magneto-Hydro-Dynamic (MHD problems with industrial tools. MHD has receivedattention some twenty to thirty years ago as a possible alternative inpropulsion applications; MHD propelled ships have even been designed forthat purpose. However, such propulsion systems have been proved of lowefficiency and fundamental researches in the area have progressivelyreceived much less attention over the past decades. Numerical simulationof MHD problem could however provide interesting solutions in the field ofturbulent flow control. The development of recent efficient numericaltechniques for multi-physic applications provide promising tool for theengineer for that purpose. In the present paper, some elementary testcases in laminar flow with magnetic forcing terms are analysed; equationsof the coupled problem are exposed, analytical solutions are derived ineach case and are compared to numerical solutions obtained with anumerical tool for multi-physic applications. The present work can be seenas a validation of numerical tools (based on the finite element method foracademic as well as industrial application purposes.

Research and application of soil-mercury-surveys method for locating uranium

International Nuclear Information System (INIS)

You Yunfei; Lu Shili; Jiao Zongrun

1995-06-01

Soil-Hg-Surveys method for locating uranium ore was presented. Soil-sampler of drilling bottom, the ability of surveying the deep uranium orebodies was raised by using this method. Application of minicomputer technology to pyrolytic-Hg-analysis raises the degree of automation and precision of the analysis. Application condition of optimum is Hg content of orebodies >1 x 10 -6 . Locating deep is about 100 m. The forecast of uranium orebodies achieved success in two unknown section that are 534 and 510 mining area, therefore two little size deposits expanded into middle size deposits. This method is as well applicable to locating gold, silver, copper, lead zinc and oil-gas natural resource and so on. (8 figs., 3 tabs.)

Case study of lean manufacturing application in a die casting manufacturing company

Science.gov (United States)

Ching, Ng Tan; Hoe, Clarence Chan Kok; Hong, Tang Sai; Ghobakhloo, Morteza; Pin, Chen Kah

2015-05-01

The case study of lean manufacturing aims to study the application of lean manufacturing in a die casting manufacturing company located in Pulau Penang, Malaysia. This case study describes mainly about the important concepts and applications of lean manufacturing which could gradually help the company in increasing the profit by studying and analyzing their current manufacturing process and company culture. Many approaches of lean manufacturing are studied in this project which includes: 5S housekeeping, Kaizen, and Takt Time. Besides, the lean tools mentioned, quality tool such as the House of Quality is being used as an analysis tool to continuously improve the product quality. In short, the existing lean culture in the company is studied and analyzed, with recommendations written at the end of this paper.

Color Mapping on Common Use-Cases in a Web Application

Directory of Open Access Journals (Sweden)

Jiří Hradil

2015-12-01

Full Text Available Psychology of Colors and its application in software is a part of a wider research related to Software Ergonomics. Nowadays, software tends to be faster, clever and even more complex. On the other side, the amount of applications, which people has to manage increases. However, user interface and all the communication between a man and a machine needs simplifying. One way how to do that is to dig into the knowledge and conventions, which users already have. Software needs to be brought near to the users maybe using the associations of the particular use-cases in the application with colors, which users already know and which are common to them. The research tries to find these associations, describe them and define the steps for the future research.

Research on conflict resolution of collaborative design with fuzzy case-based reasoning method

Institute of Scientific and Technical Information of China (English)

HOU Jun-ming; SU Chong; LIANG Shuang; WANG Wan-shan

2009-01-01

Collaborative design is a new style for modern mechanical design to meet the requirement of increasing competition. Designers of different places complete the same work, but the conflict appears in the process of design which may interface the design. Case-based reasoning (CBR) method is applied to the problem of conflict resolution, which is in the artificial intelligence field. However, due to the uncertainties in knowledge representation, attribute description, and similarity measures of CBR, it is very difficult to find the similar cases from case database. A fuzzy CBR method was proposed to solve the problem of conflict resolution in collaborative design. The process of fuzzy CBR was introduced. Based on the feature attributes and their relative weights determined by a fuzzy technique, a fuzzy CBR retrieving mechanism was developed to retrieve conflict resolution cases that tend to enhance the functions of the database. By indexing, calculating the weight and defuzzicating of the cases, the case similarity can be obtained. Then the case consistency was measured to keep the right result. Finally, the fuzzy CBR method for conflict resolution was demonstrated by means of a case study. The prototype system based on web is developed to illustrate the methodology.

Real cases study through computer applications for futures Agricultural Engineers

Science.gov (United States)

Moratiel, R.; Durán, J. M.; Tarquis, A. M.

2010-05-01

One of the huge concerns on the higher engineer education is the lag of real cases study that the future professionals need in the work and corporation market. This concern was reflected in Bologna higher education system including recommendations in this respect. The knowhow as why this or other methodology is one of the keys to resolve this problem. In the last courses given in Department of Crop Production, at the Agronomy Engineer School of Madrid (Escuela Técnica Superior de Ingenieros Agrónomos, UPM) we have developed more than one hundred applications in Microsoft Excel®. Our aim was to show different real scenarios which the future Agronomic Engineers can be found in their professional life and with items related to crop production field. In order to achieve our target, each application in Excel presents a file text in which is explained the theoretical concepts and the objectives, as well as some resources used from Excel syntax. In this way, the student can understand and use of such application, even they can modify and customize it for a real case presented in their context and/or master project. This electronic monograph gives an answer to the need to manage data in several real scenarios showed in lectures, calculus resolution, information analysis and manage worksheets in a professional and student level.

Applications and Preparation Methods of Copper Chromite Catalysts: A Review

Directory of Open Access Journals (Sweden)

Ram Prasad

2011-11-01

Full Text Available In this review article various applications and preparation methods of copper chromite catalysts have been discussed. While discussing it is concluded that copper chromite is a versatile catalyst which not only catalyses numerous processes of commercial importance and national program related to defence and space research but also finds applications in the most concerned problem worldwide i.e. environmental pollution control. Several other very useful applications of copper chromite catalysts are in production of clean energy, drugs and agro chemicals, etc. Various preparation methods about 15 have been discussed which depicts clear idea about the dependence of catalytic activity and selectivity on way of preparation of catalyst. In view of the globally increasing interest towards copper chromite catalysis, reexamination on the important applications of such catalysts and their useful preparation methods is thus the need of the time. This review paper encloses 369 references including a well-conceivable tabulation of the newer state of the art. Copyright © 2011 by BCREC UNDIP. All rights reserved.(Received: 19th March 2011, Revised: 03rd May 2011, Accepted: 23rd May 2011[How to Cite: R. Prasad, and P. Singh. (2011. Applications and Preparation Methods of Copper Chromite Catalysts: A Review. Bulletin of Chemical Reaction Engineering & Catalysis, 6 (2: 63-113. doi:10.9767/bcrec.6.2.829.63-113][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.6.2.829.63-113 || or local:  http://ejournal.undip.ac.id/index.php/bcrec/article/view/829 ] | View in 

Recent astrophysical applications of the Trojan Horse Method to nuclear astrophysics

International Nuclear Information System (INIS)

Spitaleri, C.; Cherubini, S.; Crucilla, V.; Gulino, M.; La Cognata, M.; Lamia, L.; Pizzone, R. G.; Puglia, S. M. R.; Rapisarda, G. G.; Romano, S.; Sergi, M. L.; Tumino, A.; Fu, C.; Tribble, R.; Banu, A.; Al-Abdullah, T.; Goldberg, V.; Mukhamedzhanov, A.; Tabacaru, G.; Trache, L.

2008-01-01

The Trojan Horse Method (THM) is an unique indirect technique allowing to measure astrophysical rearrangement reactions down to astrophysical relevant energies. The basic principle and a review of the recent applications of the Trojan Horse Method are presented. The applications aiming to the extraction of the bare astrophysical S b (E) for some two-body processes are discussed

Studies on the clinical application of MR perfusion image using arterial spin labeling method

International Nuclear Information System (INIS)

Miyasaka, Kenji

1999-01-01

A new technique for imaging brain perfusion, arterial spin labeling method was applied in clinic. Brain perfusion was imaged by FAIR and EPISTAR both of which using arterial spin labeling (ASL) method. Suitable parameters for small contamination were examined using a imaging phantom. Then normal volunteers were examined for imaging timing. Suitable time between labeling pulse and imaging pulse for brain capillary and parenchyma was 1.0 sec. For clinical application study, total 48 patients with brain diseases were examined by FAIR and/or EPISTAR. A lesion/white matter signal intensity ratio was calculated in all clinical cases. Average of signal intensity ratio in infarction, tumor and arteriovenous malformation (AVM) were 0.8, 2.2 and 18.6 at FAIR, and 0.6, 2.2 and 12.8 at EPISTAR, respectively. Low perfusion diseases such as cerebral infarction have low signal intensity ratio and high perfusion diseases such as AVM have high signal intensity ratio in both FAIR and EPISTAR. Brain lesions were imaged similarly in FAIR and EPISTAR, and no remarkable difference was found between FAIR and EPISTAR. As a result of diagnostic trial by signal intensity ratio in operated tumor, hemorrhagic cases could be diagnosed by accuracies of 75% in FAIR and 100% in EPISTAR, respectively. (author)

Application of Exp-function method for (2 + 1)-dimensional nonlinear evolution equations

International Nuclear Information System (INIS)

Bekir, Ahmet; Boz, Ahmet

2009-01-01

In this paper, the Exp-function method is used to construct solitary and soliton solutions of (2 + 1)-dimensional nonlinear evolution equations. (2 + 1)-dimensional breaking soliton (Calogero) equation, modified Zakharov-Kuznetsov and Konopelchenko-Dubrovsky equations are chosen to illustrate the effectiveness of the method. The method is straightforward and concise, and its applications are promising. The Exp-function method presents a wider applicability for handling nonlinear wave equations.

Engineering applications of heuristic multilevel optimization methods

Science.gov (United States)

Barthelemy, Jean-Francois M.

1989-01-01

Some engineering applications of heuristic multilevel optimization methods are presented and the discussion focuses on the dependency matrix that indicates the relationship between problem functions and variables. Coordination of the subproblem optimizations is shown to be typically achieved through the use of exact or approximate sensitivity analysis. Areas for further development are identified.

Cauliflower ear – a minimally invasive treatment method in a wrestling athlete: a case report

Directory of Open Access Journals (Sweden)

Haik J

2018-01-01

Full Text Available Josef Haik,1–4 Or Givol,2 Rachel Kornhaber,1,5 Michelle Cleary,6 Hagit Ofir,1,2 Moti Harats1–3 1Department of Plastic and Reconstructive Surgery, Sheba Medical Center, Tel Hashomer, Ramat Gan, 2Sackler School of Medicine, Tel Aviv University, Tel Aviv, Israel; 3Burn Injury Research Node, Institute for Health Research University of Notre Dame Fremantle, Fremantle WA, Australia; 4Talpiot Leadership Program, Sheba Medical Center, Tel Hashomer, Ramat Gan, Israel; 5Faculty of Health, 6School of Health Sciences, College of Health and Medicine, University of Tasmania, Sydney, NSW, Australia Abstract: Acute auricular hematoma can be caused by direct blunt trauma or other injury to the external ear. It is typically seen in those who practice full contact sports such as boxing, wrestling, and rugby. “Cauliflower ear” deformity, fibrocartilage formation during scarring, is a common complication of auricular hematomas. Therefore, acute drainage of the hematoma and postprocedural techniques for preventing recurrence are necessary for preventing the deformity. There are many techniques although no superior method of treatment has been found. In this case report, we describe a novel method using needle aspiration followed by the application of a magnet and an adapted disc to the affected area of the auricular. This minimally invasive, simple, and accessible method could potentially facilitate the treatment of cauliflower ear among full contact sports athletes. Keywords: cauliflower ear, hematoma, ear deformity, athletic injuries, wrestling, case report

Clustering Methods Application for Customer Segmentation to Manage Advertisement Campaign

Directory of Open Access Journals (Sweden)

Maciej Kutera

2010-10-01

Full Text Available Clustering methods are recently so advanced elaborated algorithms for large collection data analysis that they have been already included today to data mining methods. Clustering methods are nowadays larger and larger group of methods, very quickly evolving and having more and more various applications. In the article, our research concerning usefulness of clustering methods in customer segmentation to manage advertisement campaign is presented. We introduce results obtained by using four selected methods which have been chosen because their peculiarities suggested their applicability to our purposes. One of the analyzed method k-means clustering with random selected initial cluster seeds gave very good results in customer segmentation to manage advertisement campaign and these results were presented in details in the article. In contrast one of the methods (hierarchical average linkage was found useless in customer segmentation. Further investigations concerning benefits of clustering methods in customer segmentation to manage advertisement campaign is worth continuing, particularly that finding solutions in this field can give measurable profits for marketing activity.

Application of the Fokker-Plank-Kolmogorov equation for affluence forecast to hydropower reservoirs (Betania Case)

International Nuclear Information System (INIS)

Dominguez Calle, Efrain Antonio

2004-01-01

This paper shows a modeling technique to forecast probability density curves for the flows that represent the monthly affluence to hydropower reservoirs. Briefly, the factors that require affluence forecast in terms of probabilities, the ranges of existing forecast methods as well as the contradiction between those techniques and the real requirements of decision-making procedures are pointed out. The mentioned contradiction is resolved applying the Fokker-Planck-Kolmogorov equation that describes the time evolution of a stochastic process that can be considered as markovian. We show the numerical scheme for this equation, its initial and boundary conditions, and its application results in the case of Betania's reservoir

Determinants of investment behaviour. Methods and applications of meta-analysis

International Nuclear Information System (INIS)

Koetse, M.J.

2006-01-01

Meta-analysis is gradually gaining ground in economics as a research method to objectively and quantitatively summarise a body of existing empirical evidence. This dissertation studies the performance of well-known meta-analytic models and presents two meta-analysis applications. Despite its many attractive features, meta-analysis faces several methodical difficulties, especially when applied in economic research. We investigate two specific methodical problems that any meta-analysis in economics will have to deal with, viz., systematic effect-size variation due to primary-study misspecifications, and random effect-size heterogeneity. Using Monte-Carlo analysis we investigate the effects of these methodical problems on the results of a meta-analysis, and study the small-sample properties of several well-known and often applied meta-estimators. The focus of the meta-analysis applications is on two topics that are relevant for understanding investment behaviour, viz., the impact of uncertainty on investment spending, and the potential for substitution of capital for energy in production processes. In the first application we aim to shed light on the direction of the relationship between investment and uncertainty, and to uncover which factors are empirically relevant for explaining the wide variety in study outcomes. In the second application our goal is to analyse the direction and magnitude of capital-energy substitution potential, and to analyse the empirical relevance of suggested sources of variation in elasticity estimates

Determinants of investment behaviour. Methods and applications of meta-analysis

Energy Technology Data Exchange (ETDEWEB)

Koetse, M.J.

2006-03-14

Meta-analysis is gradually gaining ground in economics as a research method to objectively and quantitatively summarise a body of existing empirical evidence. This dissertation studies the performance of well-known meta-analytic models and presents two meta-analysis applications. Despite its many attractive features, meta-analysis faces several methodical difficulties, especially when applied in economic research. We investigate two specific methodical problems that any meta-analysis in economics will have to deal with, viz., systematic effect-size variation due to primary-study misspecifications, and random effect-size heterogeneity. Using Monte-Carlo analysis we investigate the effects of these methodical problems on the results of a meta-analysis, and study the small-sample properties of several well-known and often applied meta-estimators. The focus of the meta-analysis applications is on two topics that are relevant for understanding investment behaviour, viz., the impact of uncertainty on investment spending, and the potential for substitution of capital for energy in production processes. In the first application we aim to shed light on the direction of the relationship between investment and uncertainty, and to uncover which factors are empirically relevant for explaining the wide variety in study outcomes. In the second application our goal is to analyse the direction and magnitude of capital-energy substitution potential, and to analyse the empirical relevance of suggested sources of variation in elasticity estimates.

Key Techniques and Risk Management for the Application of the Pile-Beam-Arch (PBA Excavation Method: A Case Study of the Zhongjie Subway Station

Directory of Open Access Journals (Sweden)

Yong-ping Guan

2014-01-01

Full Text Available The design and construction of shallow-buried tunnels in densely populated urban areas involve many challenges. The ground movements induced by tunneling effects pose potential risks to infrastructure such as surface buildings, pipelines, and roads. In this paper, a case study of the Zhongjie subway station located in Shenyang, China, is examined to investigate the key construction techniques and the influence of the Pile-Beam-Arch (PBA excavation method on the surrounding environment. This case study discusses the primary risk factors affecting the environmental safety and summarizes the corresponding risk mitigation measures and key techniques for subway station construction using the PBA excavation method in a densely populated urban area.

Consideration of the environmental effects on fatigue behavior of austenitic components. Calculation methods and practical application

International Nuclear Information System (INIS)

Seichter, Johannes; Reese, Sven H.; Klucke, Dietmar

2012-01-01

During the last years environmental effects on the fatigue behavior of nuclear power plant components has worldwide been discussed controversial with respect to the transferability of laboratory data on real components. A publication from Argonne National Laboratory on experimental results concerning environmental effects (air and LWR coolant) on fatigue of austenitic steels included a proposal on calculation methods concerning the lifetime reduction due to environmental effects. This calculation method, i.e. multiplication of the usage factor by a F(en), has been included into the ASME Code, Section III, Division I, as Code Case N-792 (fatigue evaluations including environmental effects). The presented contribution evaluates the practical application of this calculation procedure and demonstrates the determination of the usage factor of an austenitic component under environmental exposure.

Spectral/ hp element methods: Recent developments, applications, and perspectives

Science.gov (United States)

Xu, Hui; Cantwell, Chris D.; Monteserin, Carlos; Eskilsson, Claes; Engsig-Karup, Allan P.; Sherwin, Spencer J.

2018-02-01

The spectral/ hp element method combines the geometric flexibility of the classical h-type finite element technique with the desirable numerical properties of spectral methods, employing high-degree piecewise polynomial basis functions on coarse finite element-type meshes. The spatial approximation is based upon orthogonal polynomials, such as Legendre or Chebychev polynomials, modified to accommodate a C 0 - continuous expansion. Computationally and theoretically, by increasing the polynomial order p, high-precision solutions and fast convergence can be obtained and, in particular, under certain regularity assumptions an exponential reduction in approximation error between numerical and exact solutions can be achieved. This method has now been applied in many simulation studies of both fundamental and practical engineering flows. This paper briefly describes the formulation of the spectral/ hp element method and provides an overview of its application to computational fluid dynamics. In particular, it focuses on the use of the spectral/ hp element method in transitional flows and ocean engineering. Finally, some of the major challenges to be overcome in order to use the spectral/ hp element method in more complex science and engineering applications are discussed.

Nested partitions method, theory and applications

CERN Document Server

Shi, Leyuan

2009-01-01

There is increasing need to solve large-scale complex optimization problems in a wide variety of science and engineering applications, including designing telecommunication networks for multimedia transmission, planning and scheduling problems in manufacturing and military operations, or designing nanoscale devices and systems. Advances in technology and information systems have made such optimization problems more and more complicated in terms of size and uncertainty. Nested Partitions Method, Theory and Applications provides a cutting-edge research tool to use for large-scale, complex systems optimization. The Nested Partitions (NP) framework is an innovative mix of traditional optimization methodology and probabilistic assumptions. An important feature of the NP framework is that it combines many well-known optimization techniques, including dynamic programming, mixed integer programming, genetic algorithms and tabu search, while also integrating many problem-specific local search heuristics. The book uses...

The Application of Simulation Method in Isothermal Elastic Natural Gas Pipeline

Science.gov (United States)

Xing, Chunlei; Guan, Shiming; Zhao, Yue; Cao, Jinggang; Chu, Yanji

2018-02-01

This Elastic pipeline mathematic model is of crucial importance in natural gas pipeline simulation because of its compliance with the practical industrial cases. The numerical model of elastic pipeline will bring non-linear complexity to the discretized equations. Hence the Newton-Raphson method cannot achieve fast convergence in this kind of problems. Therefore A new Newton Based method with Powell-Wolfe Condition to simulate the Isothermal elastic pipeline flow is presented. The results obtained by the new method aregiven based on the defined boundary conditions. It is shown that the method converges in all cases and reduces significant computational cost.

Application of the selected physical methods in biological research

Directory of Open Access Journals (Sweden)

Jaromír Tlačbaba

2013-01-01

Full Text Available This paper deals with the application of acoustic emission (AE, which is a part of the non-destructive methods, currently having an extensive application. This method is used for measuring the internal defects of materials. AE has a high potential in further research and development to extend the application of this method even in the field of process engineering. For that matter, it is the most elaborate acoustic emission monitoring in laboratory conditions with regard to external stimuli. The aim of the project is to apply the acoustic emission recording the activity of bees in different seasons. The mission is to apply a new perspective on the behavior of colonies by means of acoustic emission, which collects a sound propagation in the material. Vibration is one of the integral part of communication in the community. Sensing colonies with the support of this method is used for understanding of colonies biological behavior to stimuli clutches, colony development etc. Simulating conditions supported by acoustic emission monitoring system the illustrate colonies activity. Collected information will be used to represent a comprehensive view of the life cycle and behavior of honey bees (Apis mellifera. Use of information about the activities of bees gives a comprehensive perspective on using of acoustic emission in the field of biological research.

Gastrin radioimmunoassay. Description and application of a novel method

International Nuclear Information System (INIS)

Nemeth, J.; Jakab, B.; Schweibert, I.; Szolcsanyi, J.; Oroszi, G.; Szilvassy, Z.

2002-01-01

Development and application of a novel gastrin radioimmunoassay (RIA) are described. 125 I-labeling of non-sulphated human gastrin-17 (nshG-17) was performed by the iodogen method and the mono-iodinated hormone, as RIA tracer, was separated by reversed-phase high performance liquid chromatography (HPLC). Serum gastrin levels were measured in response to intravenous application of isoproterenol, a non-selective beta and phenylephrine, a selective alpha-1 receptor agonist using a newly developed method specific for the C-terminal part of the hormone in rats. Isoproterenol at clinically relevant doses elicited a significant increase in serum gastrin concentration in a dose-dependent fashion, whereas phenylephrine was without effect. (author)

Inverse operator theory method and its applications in nonlinear physics

International Nuclear Information System (INIS)

Fang Jinqing

1993-01-01

Inverse operator theory method, which has been developed by G. Adomian in recent years, and its applications in nonlinear physics are described systematically. The method can be an unified effective procedure for solution of nonlinear and/or stochastic continuous dynamical systems without usual restrictive assumption. It is realized by Mathematical Mechanization by us. It will have a profound on the modelling of problems of physics, mathematics, engineering, economics, biology, and so on. Some typical examples of the application are given and reviewed

A fast running method for predicting the efficiency of core melt spreading for application in ASTEC

International Nuclear Information System (INIS)

Spengler, C.

2010-01-01

The integral Accident Source Term Evaluation Code (ASTEC) is jointly developed by the French Institut de Radioprotection et de Surete Nucleaire (IRSN) and the German Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH to simulate the complete scenario of a hypothetical severe accident in a nuclear light water reactor, from the initial event until the possible radiological release of fission products out of the containment. In the frame of the new series of ASTEC V2 versions appropriate model extensions to the European Pressurised Water Reactor (EPR) are under development. With view to assessing with ASTEC the proper operation of the ex-vessel melt retention and coolability concept of the EPR with regard to melt spreading an approximation of the area finally covered by the corium and of the distance run by the corium front before freezing is required. A necessary capability of ASTEC is in a first step to identify such boundary cases, for which there is a potential that the melt will freeze before the spreading area is completely filled. This paper presents a fast running method for estimating the final extent of the area covered with melt on which a simplified criterion in ASTEC for detecting such boundary cases will be based. If a boundary case is detected the application of a more-detailed method might be necessary to assess further the consequences for the accident sequence. The major objective here is to provide a reliable method for estimating the final result of the spreading and not to provide highly detailed methods to simulate the dynamics of the transient process. (orig.)

Do método do caso ao case: a trajetória de uma ferramenta pedagógica Case method and case study: an epistemological approach

Directory of Open Access Journals (Sweden)

Maria Arlinda de Assis Menezes

2009-04-01

Full Text Available O presente trabalho procura distinguir os conceitos acerca do método de estudo de casos e o método do caso dentro das Ciências Sociais e suas aplicabilidades, assim como diferenciar o modo empírico/indutivo e o teórico/dedutivo de pensar, sendo apresentado no trabalho como característicos de americanos e alemães respectivamente, fatores que diferenciam o ensino nos dois países. Para tanto, realiza uma descrição sobre o momento do surgimento do método do caso na escola de Direito em Harvard, destacando a conjuntura social, econômica e cultural que possibilitaram a criação desse instrumento pedagógico e, concomitantemente, apresenta o estudo de caso que, como proposto por Yin, cuja obra referenciou o trabalho em questão, se configura em um dos mais utilizados métodos nos estudos científicos, rompendo com o credo de que é um método fácil de ser aplicado, antes, exige do pesquisador dedicação e rigor científico, além de uma elaboração do problema de maneira a não torná-lo óbvio, um simples relato de experiência. Já o método de casos, criado por Christopher Columbus Langdell, não busca a pesquisa empírica como resposta a um determinado problema, antes, é uma ferramenta pedagógica utilizada na formação de advogados, juristas e administradores de empresas em que a teoria é um subsídio à análise de jurisprudências e experiências em administração, não apenas o objetivo puro e simples da academia.The present work seeks to draw a distinction between the concepts of Case Method and Case Study within the Social Sciences and their applicability, as well as to differentiate the empirical/inductive and theoretical/deductive modes of thinking, which are presented here as respectively characteristic of Americans and Germans, and as factors that distinguish the education in those two countries. To such end, the text describes the moment when the Case Method appeared in the Harvard Law School, emphasizing the social

New methods to interpolate large volume of data from points or particles (Mesh-Free) methods application for its scientific visualization

International Nuclear Information System (INIS)

Reyes Lopez, Y.; Yervilla Herrera, H.; Viamontes Esquivel, A.; Recarey Morfa, C. A.

2009-01-01

In the following paper we developed a new method to interpolate large volumes of scattered data, focused mainly on the results of the Mesh free Methods, Points Methods and the Particles Methods application. Through this one, we use local radial basis function as interpolating functions. We also use over-tree as the data structure that allows to accelerate the localization of the data that influences to interpolate the values at a new point, speeding up the application of scientific visualization techniques to generate images from large data volumes from the application of Mesh-free Methods, Points and Particle Methods, in the resolution of diverse models of physics-mathematics. As an example, the results obtained after applying this method using the local interpolation functions of Shepard are shown. (Author) 22 refs

Monte Carlo methods and applications in nuclear physics

International Nuclear Information System (INIS)

Carlson, J.

1990-01-01

Monte Carlo methods for studying few- and many-body quantum systems are introduced, with special emphasis given to their applications in nuclear physics. Variational and Green's function Monte Carlo methods are presented in some detail. The status of calculations of light nuclei is reviewed, including discussions of the three-nucleon-interaction, charge and magnetic form factors, the coulomb sum rule, and studies of low-energy radiative transitions. 58 refs., 12 figs

Doses and application methods of Azospirillum brasilense in irrigated upland rice

Directory of Open Access Journals (Sweden)

Nayara F. S. Garcia

Full Text Available ABSTRACT The study was carried out in Selvíria-MS, in the 2011/12 and 2012/13 agricultural years, aiming to evaluate the efficiency of Azospirillum brasilense in nitrogen fixation in upland rice, as a function of doses and application methods of the inoculant containing this diazotrophic bacterium. The experimental design was randomized blocks, arranged in a 4 x 4 factorial scheme, with 4 doses of inoculant (control without inoculation, 100, 200 and 300 mL of the commercial product ha-1 and 4 application methods (seed inoculation, application in the sowing furrow, soil spraying after sowing, and foliar spraying at the beginning of plant tillering, with 4 replicates. During the experiment, the agronomic characteristics, production components and yield of the rice crop were evaluated. It was concluded that the inoculant containing Azospirillum brasilense promotes increase (19% in the yield of upland rice under sprinkler irrigation when used at the dose of 200 mL ha-1, regardless of the application methods.

Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

Science.gov (United States)

Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

2008-12-15

Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

Exact Green's function method of solar force-free magnetic-field computations with constant alpha. I - Theory and basic test cases

Science.gov (United States)

Chiu, Y. T.; Hilton, H. H.

1977-01-01

Exact closed-form solutions to the solar force-free magnetic-field boundary-value problem are obtained for constant alpha in Cartesian geometry by a Green's function approach. The uniqueness of the physical problem is discussed. Application of the exact results to practical solar magnetic-field calculations is free of series truncation errors and is at least as economical as the approximate methods currently in use. Results of some test cases are presented.

A direct method to solve optimal knots of B-spline curves: An application for non-uniform B-spline curves fitting.

Directory of Open Access Journals (Sweden)

Van Than Dung

Full Text Available B-spline functions are widely used in many industrial applications such as computer graphic representations, computer aided design, computer aided manufacturing, computer numerical control, etc. Recently, there exist some demands, e.g. in reverse engineering (RE area, to employ B-spline curves for non-trivial cases that include curves with discontinuous points, cusps or turning points from the sampled data. The most challenging task in these cases is in the identification of the number of knots and their respective locations in non-uniform space in the most efficient computational cost. This paper presents a new strategy for fitting any forms of curve by B-spline functions via local algorithm. A new two-step method for fast knot calculation is proposed. In the first step, the data is split using a bisecting method with predetermined allowable error to obtain coarse knots. Secondly, the knots are optimized, for both locations and continuity levels, by employing a non-linear least squares technique. The B-spline function is, therefore, obtained by solving the ordinary least squares problem. The performance of the proposed method is validated by using various numerical experimental data, with and without simulated noise, which were generated by a B-spline function and deterministic parametric functions. This paper also discusses the benchmarking of the proposed method to the existing methods in literature. The proposed method is shown to be able to reconstruct B-spline functions from sampled data within acceptable tolerance. It is also shown that, the proposed method can be applied for fitting any types of curves ranging from smooth ones to discontinuous ones. In addition, the method does not require excessive computational cost, which allows it to be used in automatic reverse engineering applications.

Sales Education beyond the Classroom: Building Participative Learning Experiences in Sales Management through the CMGS Method (Case Method with Guest Speakers)

Science.gov (United States)

Ruizalba Robledo, José Luis; Almenta López, Estefanía; Vallespín Arán, María

2014-01-01

The overarching goal of working through the CMGS Method (Case Method with Guest Speakers) in Sales Management courses is to provide Business and marketing learners with practical knowledge about how a sales manager can deal with a wide variety of possible professional scenarios. Even when the case method itself is an excellent way to equip…

The stochastic finite element methods with applications in geotechnics and rupture mechanics

International Nuclear Information System (INIS)

Baldeweck, Herve

1999-01-01

After having presented and classified the various stochastic finite elements methods, notably by distinguishing reliability methods (first order and second order reliability methods, response surfaces, Monte Carlo) and sensitivity methods (Monte Carlo, spectral development, perturbation, weighted integrals), the author of this research thesis presents basic tools needed for different theoretical developments: hazard representation and method of moments. He also presents the problem which is used all along this work to compare and assess the different sensitivity methods. Then, he reports the theoretical development of these sensitivity methods: the Monte Carlo method, the spectral development method, the perturbation method, and the quadrature method. This last one is a new one aimed at the assessment of statistical moments. The author highlights the relationships between reliability and sensitivity methods. In the third part, several applications and calculations are reported. Applications are in geotechnics (soil-structure interaction, calculation of soil stiffness, application in the field of geo-materials with the calculation of an underground gallery), and in rupture mechanics (international benchmark on the reliability of a nuclear reactor, non linear calculation of a cracked straight pipe, reliability calculation of a cracked plate with a Young modulus being a random field) [fr

Fuzzy multiple objective decision making methods and applications

CERN Document Server

Lai, Young-Jou

1994-01-01

In the last 25 years, the fuzzy set theory has been applied in many disciplines such as operations research, management science, control theory, artificial intelligence/expert system, etc. In this volume, methods and applications of crisp, fuzzy and possibilistic multiple objective decision making are first systematically and thoroughly reviewed and classified. This state-of-the-art survey provides readers with a capsule look into the existing methods, and their characteristics and applicability to analysis of fuzzy and possibilistic programming problems. To realize practical fuzzy modelling, it presents solutions for real-world problems including production/manufacturing, location, logistics, environment management, banking/finance, personnel, marketing, accounting, agriculture economics and data analysis. This book is a guided tour through the literature in the rapidly growing fields of operations research and decision making and includes the most up-to-date bibliographical listing of literature on the topi...

Optimized periodic verification testing blended risk and performance-based MOV inservice test program an application of ASME code case OMN-1

Energy Technology Data Exchange (ETDEWEB)

Sellers, C.; Fleming, K.; Bidwell, D.; Forbes, P. [and others

1996-12-01

This paper presents an application of ASME Code Case OMN-1 to the GL 89-10 Program at the South Texas Project Electric Generating Station (STPEGS). Code Case OMN-1 provides guidance for a performance-based MOV inservice test program that can be used for periodic verification testing and allows consideration of risk insights. Blended probabilistic and deterministic evaluation techniques were used to establish inservice test strategies including both test methods and test frequency. Described in the paper are the methods and criteria for establishing MOV safety significance based on the STPEGS probabilistic safety assessment, deterministic considerations of MOV performance characteristics and performance margins, the expert panel evaluation process, and the development of inservice test strategies. Test strategies include a mix of dynamic and static testing as well as MOV exercising.

Optimized periodic verification testing blended risk and performance-based MOV inservice test program an application of ASME code case OMN-1

International Nuclear Information System (INIS)

Sellers, C.; Fleming, K.; Bidwell, D.; Forbes, P.

1996-01-01

This paper presents an application of ASME Code Case OMN-1 to the GL 89-10 Program at the South Texas Project Electric Generating Station (STPEGS). Code Case OMN-1 provides guidance for a performance-based MOV inservice test program that can be used for periodic verification testing and allows consideration of risk insights. Blended probabilistic and deterministic evaluation techniques were used to establish inservice test strategies including both test methods and test frequency. Described in the paper are the methods and criteria for establishing MOV safety significance based on the STPEGS probabilistic safety assessment, deterministic considerations of MOV performance characteristics and performance margins, the expert panel evaluation process, and the development of inservice test strategies. Test strategies include a mix of dynamic and static testing as well as MOV exercising

Pediatric Digital Necrosis Secondary to Dressing Application: A Case Series.

Science.gov (United States)

Bjorklund, Kim A; Rice, Dahlia M; Amalfi, Ashley N

2018-04-01

Pediatric digital necrosis resulting in revision amputation is a devastating outcome following digital dressing application. We report a series of 4 pediatric patients (age: 21 months-11 years) who presented for surgical consultation related to digital ischemia and irreversible necrosis following the application of Coban digital dressings. A review of the literature demonstrated that such injuries had not previously been described. In our case series, Coban dressing was utilized as a deterrent for thumb sucking, fingertip tuft fractures with nail bed lacerations, and a phalanx fracture secondary to crush injury. All 4 children suffered digital necrosis secondary to Coban dressings and ultimately required revision amputation. We discuss risks factors, application practices, and strategies to minimize complications with digital dressings in the pediatric population with the intent of creating awareness among hand surgeons to help promote safe practices and improve patient outcomes.

Application of numerical methods to the determination of molecular wave functions; Application de methodes de calcul numerique a la determination de fonctions d'onde moleculaires

Energy Technology Data Exchange (ETDEWEB)

Douady, Jerome

1969-10-01

A simplified SCF Method is developed. The wave function of molecular systems and spin densities in the case of free radicals are computed from geometrical data. This method, including at the beginning a delocalization of electrons over all the molecular system, two methods which clear out bonding and anti-bonding interactions have been studied and programmed: a) overlap population analysis, b) localisation of molecular orbitals. These methods have been carried out in the case of organic compounds and free radicals. (author) [French] Mise en oeuvre d'une methode de champ self-consistant simplifie qui, a partir des donnees geometriques, permet de calculer la fonction d'onde des systemes moleculaires et les densites de spin dans le cas des radicaux libres. Cette methode introduisant au depart une delocalisation des electrons sur tout le systeme moleculaire, deux methodes permettant de rendre compte du caractere liant et antiliant de ces electrons ont ete etudiees et programmees: a) analyse des populations de recouvrement, b) localisation des orbitales moleculaires. Ces methodes ont ete appliquees a divers composes organiques radicalaires et non radicalaires. (auteur)

The correlation based zonal method and its application to the back pass channel of oxy/air-fired CFB boiler

International Nuclear Information System (INIS)

Bordbar, Mohammad Hadi; Hyppänen, Timo

2015-01-01

A set of correlations for direct exchange area (DEA) between zones are presented. The correlations are simpler and much faster than the classical method used for DEA calculations in zone method. Additionally a unique form of correlation supports both singular and non-singular DEA calculation and no extra effort for non-singular cases is needed. Using the new correlations, the correlation based zone method (CBZM) is introduced and validated by several benchmarks. The CBZM results were in excellent agreement with the benchmark solutions. As an application case, by using the CZBM the gray and non-gray radiative heat transfer has been analyzed in a large back pass channel of a CFB boiler for the case of air and oxygen-fired combustion scenarios. The effect of the spectral radiative behavior of combustion gases on the predicted radiative heat fluxes on the walls is addressed. The effect of combustion scenario on the operation of the unit is also discussed. - Highlights: • Efficient correlations for DEA calculation are presented. • The gray and non-gray correlation based zone method is introduced. • The model is validated against several 3D benchmarks. • The effect of non-gray radiation in a large scale back pass channel is addressed. • The effect of combustion scenario on radiation in back pass channel is reported

The Case Study as a Method for Exploring Expert Music Teaching

Directory of Open Access Journals (Sweden)

Jane Saunders

2010-05-01

Full Text Available This article explains how the case study method was used in an exploration of the career of an expert music teacher. The contextual and holistic qualities of the case study are discussed. In addition, insider research and the situated knowledge of participants in this case study are considered, leading to a brief summary of the research findings and an explication of the expert music teacher.

Case study application of the IAEA safeguards assessment methodology to a mixed oxide fuel fabrication facility

International Nuclear Information System (INIS)

Swartz, J.; McDaniel, T.

1981-01-01

Science Applications, Inc. has prepared a case study illustrating the application of an assessment methodology to an international system for safeguarding mixed oxide (MOX) fuel fabrication facilities. This study is the second in a series of case studies which support an effort by the International Atomic Energy Agency (IAEA) and an international Consultant Group to develop a methodology for assessing the effectiveness of IAEA safeguards. 3 refs

A Proposal of Client Application Architecture using Loosely Coupled Component Connection Method in Banking Branch System

Science.gov (United States)

Someya, Harushi; Mori, Yuichi; Abe, Masahiro; Machida, Isamu; Hasegawa, Atsushi; Yoshie, Osamu

Due to the deregulation of financial industry, the branches in banking industry need to shift to the sales-oriented bases from the operation-oriented bases. For corresponding to this movement, new banking branch systems are being developed. It is the main characteristics of new systems that we bring the form operations that have traditionally been performed at each branch into the centralized operation center for the purpose of rationalization and efficiency of the form operations. The branches treat a wide variety of forms. The forms can be described by common items in many cases, but the items include the different business logic and each form has the different relation among the items. And there is a need to develop the client application by user oneself. Consequently the challenge is to arrange the development environment that is high reusable, easy customizable and user developable. We propose a client application architecture that has a loosely coupled component connection method, and allows developing the applications by only describing the screen configurations and their transitions in XML documents. By adopting our architecture, we developed client applications of the centralized operation center for the latest banking branch system. Our experiments demonstrate good performances.

Wavelength selection method with standard deviation: application to pulse oximetry.

Science.gov (United States)

Vazquez-Jaccaud, Camille; Paez, Gonzalo; Strojnik, Marija

2011-07-01

Near-infrared spectroscopy provides useful biological information after the radiation has penetrated through the tissue, within the therapeutic window. One of the significant shortcomings of the current applications of spectroscopic techniques to a live subject is that the subject may be uncooperative and the sample undergoes significant temporal variations, due to his health status that, from radiometric point of view, introduce measurement noise. We describe a novel wavelength selection method for monitoring, based on a standard deviation map, that allows low-noise sensitivity. It may be used with spectral transillumination, transmission, or reflection signals, including those corrupted by noise and unavoidable temporal effects. We apply it to the selection of two wavelengths for the case of pulse oximetry. Using spectroscopic data, we generate a map of standard deviation that we propose as a figure-of-merit in the presence of the noise introduced by the living subject. Even in the presence of diverse sources of noise, we identify four wavelength domains with standard deviation, minimally sensitive to temporal noise, and two wavelengths domains with low sensitivity to temporal noise.

Comparison of the applicability of neural networks and cluster classification methods on the example company's financial situation

Directory of Open Access Journals (Sweden)

Oldřich Trenz

2010-01-01

Full Text Available The paper is focused on comparing the classification ability of the model with self-learning neutral network and methods from cluster analysis. The emphasis is particularly on the comparison of different approaches to a specific application example of the commitment, the classification of then financial situation. The aim is to critically evaluate different approaches at the level of application and deployment options.The verify the classification capability of the different approaches were used financial data from the database „Credit Info“, in particular data describing the financial situation of the two hundred eleven farms of homogeneous and uniform primary field.Input data were from the methods used, modified and evaluated by appropriate methodology. Found the final solution showed that the used approaches do not show significant differences, and they can say that they are equivalent. Based on this finding can formulate the conclusion that the approach of artificial intelligence (self-learning neural network is as effective as a partial methods in the field of cluster analysis. In both cases, these approaches can be an invaluable tool in decision making.When the financial situation is evaluated by the expert, the calculation of liquidity, profitability and other financial indicators are making some simplification. In this respect, neural networks perform better, since these simplifications in them selves are not natively included. They can better assess and somewhat ambiguous cases, including businesses with undefined financial situation, the so-called data in the border region. In this respect, support and representation of the graphical layout of the resulting situation sorted out objects using software implemented neural network model.

Sensitivity analysis: Theory and practical application in safety cases

International Nuclear Information System (INIS)

Kuhlmann, Sebastian; Plischke, Elmar; Roehlig, Klaus-Juergen; Becker, Dirk-Alexander

2014-01-01

The projects described here aim at deriving an adaptive and stepwise approach to sensitivity analysis (SA). Since the appropriateness of a single SA method strongly depends on the nature of the model under study, a top-down approach (from simple to sophisticated methods) is suggested. If simple methods explain the model behaviour sufficiently well then there is no need for applying more sophisticated ones and the SA procedure can be considered complete. The procedure is developed and tested using a model for a LLW/ILW repository in salt. Additionally, a new model for the disposal of HLW in rock salt will be available soon for SA studies within the MOSEL/NUMSA projects. This model will address special characteristics of waste disposal in undisturbed rock salt, especially the case of total confinement, resulting in a zero release which is indeed the objective of radioactive waste disposal. A high proportion of zero-output realisations causes many SA methods to fail, so special treatment is needed and has to be developed. Furthermore, the HLW disposal model will be used as a first test case for applying the procedure described above, which was and is being derived using the LLW/ILW model. How to treat dependencies in the input, model conservatism and time-dependent outputs will be addressed in the future project programme: - If correlations or, more generally, dependencies between input parameters exist, the question arises about the deeper meaning of sensitivity results in such cases: A strict separation between inputs, internal states and outputs is no longer possible. Such correlations (or dependencies) might have different reasons. In some cases correlated input parameters might have a common physically (well-)known fundamental cause but there are reasons why this fundamental cause cannot or should not be integrated into the model, i.e. the cause might generate a very complex model which cannot be calculated in appropriate time. In other cases the correlation may

Monte Carlo methods and applications in nuclear physics

Energy Technology Data Exchange (ETDEWEB)

Carlson, J.

1990-01-01

Monte Carlo methods for studying few- and many-body quantum systems are introduced, with special emphasis given to their applications in nuclear physics. Variational and Green's function Monte Carlo methods are presented in some detail. The status of calculations of light nuclei is reviewed, including discussions of the three-nucleon-interaction, charge and magnetic form factors, the coulomb sum rule, and studies of low-energy radiative transitions. 58 refs., 12 figs.

[Research Progress and Prospect of Applications of Finite Element Method in Lumbar Spine Biomechanics].

Science.gov (United States)

Zhang, Zhenjun; Li, Yang; Liao, Zhenhua; Liu, Weiqiang

2016-12-01

Based on the application of finite element analysis in spine biomechanics,the research progress of finite element method applied in lumbar spine mechanics is reviewed and the prospect is forecasted.The related works,including lumbar ontology modeling,clinical application research,and occupational injury and protection,are summarized.The main research areas of finite element method are as follows:new accurate modeling process,the optimized simulation method,diversified clinical effect evaluation,and the clinical application of artificial lumbar disc.According to the recent research progress,the application prospects of finite element method,such as automation and individuation of modeling process,evaluation and analysis of new operation methods and simulation of mechanical damage and dynamic response,are discussed.The purpose of this paper is to provide the theoretical reference and practical guidance for the clinical lumbar problems by reviewing the application of finite element method in the field of the lumbar spine biomechanics.

A Guideline of Using Case Method in Software Engineering Courses

Science.gov (United States)

Zainal, Dzulaiha Aryanee Putri; Razali, Rozilawati; Shukur, Zarina

2014-01-01

Software Engineering (SE) education has been reported to fall short in producing high quality software engineers. In seeking alternative solutions, Case Method (CM) is regarded as having potential to solve the issue. CM is a teaching and learning (T&L) method that has been found to be effective in Social Science education. In principle,…

Analytical method of waste allocation in waste management systems: Concept, method and case study

Energy Technology Data Exchange (ETDEWEB)

Bergeron, Francis C., E-mail: francis.b.c@videotron.ca

2017-01-15

Waste is not a rejected item to dispose anymore but increasingly a secondary resource to exploit, influencing waste allocation among treatment operations in a waste management (WM) system. The aim of this methodological paper is to present a new method for the assessment of the WM system, the “analytical method of the waste allocation process” (AMWAP), based on the concept of the “waste allocation process” defined as the aggregation of all processes of apportioning waste among alternative waste treatment operations inside or outside the spatial borders of a WM system. AMWAP contains a conceptual framework and an analytical approach. The conceptual framework includes, firstly, a descriptive model that focuses on the description and classification of the WM system. It includes, secondly, an explanatory model that serves to explain and to predict the operation of the WM system. The analytical approach consists of a step-by-step analysis for the empirical implementation of the conceptual framework. With its multiple purposes, AMWAP provides an innovative and objective modular method to analyse a WM system which may be integrated in the framework of impact assessment methods and environmental systems analysis tools. Its originality comes from the interdisciplinary analysis of the WAP and to develop the conceptual framework. AMWAP is applied in the framework of an illustrative case study on the household WM system of Geneva (Switzerland). It demonstrates that this method provides an in-depth and contextual knowledge of WM. - Highlights: • The study presents a new analytical method based on the waste allocation process. • The method provides an in-depth and contextual knowledge of the waste management system. • The paper provides a reproducible procedure for professionals, experts and academics. • It may be integrated into impact assessment or environmental system analysis tools. • An illustrative case study is provided based on household waste

Analytical method of waste allocation in waste management systems: Concept, method and case study

International Nuclear Information System (INIS)

Bergeron, Francis C.

2017-01-01

Waste is not a rejected item to dispose anymore but increasingly a secondary resource to exploit, influencing waste allocation among treatment operations in a waste management (WM) system. The aim of this methodological paper is to present a new method for the assessment of the WM system, the “analytical method of the waste allocation process” (AMWAP), based on the concept of the “waste allocation process” defined as the aggregation of all processes of apportioning waste among alternative waste treatment operations inside or outside the spatial borders of a WM system. AMWAP contains a conceptual framework and an analytical approach. The conceptual framework includes, firstly, a descriptive model that focuses on the description and classification of the WM system. It includes, secondly, an explanatory model that serves to explain and to predict the operation of the WM system. The analytical approach consists of a step-by-step analysis for the empirical implementation of the conceptual framework. With its multiple purposes, AMWAP provides an innovative and objective modular method to analyse a WM system which may be integrated in the framework of impact assessment methods and environmental systems analysis tools. Its originality comes from the interdisciplinary analysis of the WAP and to develop the conceptual framework. AMWAP is applied in the framework of an illustrative case study on the household WM system of Geneva (Switzerland). It demonstrates that this method provides an in-depth and contextual knowledge of WM. - Highlights: • The study presents a new analytical method based on the waste allocation process. • The method provides an in-depth and contextual knowledge of the waste management system. • The paper provides a reproducible procedure for professionals, experts and academics. • It may be integrated into impact assessment or environmental system analysis tools. • An illustrative case study is provided based on household waste

Use of the safety case to focus KMS applications - 16348

International Nuclear Information System (INIS)

Osawa, Hideaki; Hioki, Kazumasa; Umeki, Hiroyuki; Takase, Hiroyasu; McKinley, Ian

2009-01-01

The safety case, as defined in Japan, is an integrated set of arguments to show that a repository is sufficiently safe during both operational and post-closure phases. It explicitly includes the findings of a safety assessment and a demonstration of confidence in these findings. It is developed in a stepwise manner, with provisional cases used to support decisions at major project milestones. Social acceptance is acknowledged to be critical and hence a safety case includes not only technical components, but also the arguments required to explain fundamental issues to all key stakeholders. In the JAEA KMS project, the safety case has been found useful as a framework that allows all supporting R and D to be seen in the context of its applicability. Various tools have been examined to develop associated argumentation models and they have been seen to provide an overview that is valuable to both the users and producers of knowledge. The paper will review progress to date in this work, with illustrative examples of argumentation networks and an outline of future developments and challenges. (authors)

An application of a hybrid MCDM method for the evaluation of entrepreneurial intensity among the SMEs: a case study.

Science.gov (United States)

Rostamzadeh, Reza; Ismail, Kamariah; Bodaghi Khajeh Noubar, Hossein

2014-01-01

This study presents one of the first attempts to focus on critical success factors influencing the entrepreneurial intensity of Malaysian small and medium sized enterprises (SMEs) as they attempt to expand internationally. The aim of this paper is to evaluate and prioritize the entrepreneurial intensity among the SMEs using multicriteria decision (MCDM) techniques. In this research FAHP is used for finding the weights of criteria and subcriteria. Then for the final ranking of the companies, VIKOR (in Serbian: VlseKriterijumska Optimizacija I Kompromisno Resenje) method was used. Also, as an additional tool, TOPSIS technique, is used to see the differences of two methods applied over the same data. 5 main criteria and 14 subcriteria were developed and implemented in the real-world cases. As the results showed, two ranking methods provided different ranking. Furthermore, the final findings of the research based on VIKOR and TOPSIS indicated that the firms A3 and A4 received the first rank, respectively. In addition, the firm A4 was known as the most entrepreneurial company. This research has been done in the manufacturing sector, but it could be also extended to the service sector for measurement.

Self-destruction by multiple methods during a single episode: a case ...

African Journals Online (AJOL)

Results: Three different methods of suicide were apparent in this instance: hanging, leaping down the cliff and drowning as was evidenced by the autopsy and positive diatom test. The complexity of this case was the planned protection against the failure of one method employed to commit suicide. The methods used were ...

Clustering Methods Application for Customer Segmentation to Manage Advertisement Campaign

OpenAIRE

Maciej Kutera; Mirosława Lasek

2010-01-01

Clustering methods are recently so advanced elaborated algorithms for large collection data analysis that they have been already included today to data mining methods. Clustering methods are nowadays larger and larger group of methods, very quickly evolving and having more and more various applications. In the article, our research concerning usefulness of clustering methods in customer segmentation to manage advertisement campaign is presented. We introduce results obtained by using four sel...

Comparative study of different application methods of 14C-Fosthiazate in tomato plants

International Nuclear Information System (INIS)

Nitesh Sharma; Surendra Kumar

2011-01-01

A comparative study of different application methods of nematicide 14 C-Fosthiazate was done for the uptake in tomato plants in two varieties Pusa Ruby and Pusa Early Dwarf. The application methods used for the research purpose are seed treatment, soil supplication and drip application in presence and absence of surfactant (Tween-80).It as found that percent absorption was the highest in the drip irrigation method in presence of surfactant. The percent uptake of 14 C-Fosthiazate in two varieties of tomato plants was found to be higher in Pusa Early Dwarf in all the treatment methods. (author)

Application of DNA-based methods in forensic entomology.

Science.gov (United States)

Wells, Jeffrey D; Stevens, Jamie R

2008-01-01

A forensic entomological investigation can benefit from a variety of widely practiced molecular genotyping methods. The most commonly used is DNA-based specimen identification. Other applications include the identification of insect gut contents and the characterization of the population genetic structure of a forensically important insect species. The proper application of these procedures demands that the analyst be technically expert. However, one must also be aware of the extensive list of standards and expectations that many legal systems have developed for forensic DNA analysis. We summarize the DNA techniques that are currently used in, or have been proposed for, forensic entomology and review established genetic analyses from other scientific fields that address questions similar to those in forensic entomology. We describe how accepted standards for forensic DNA practice and method validation are likely to apply to insect evidence used in a death or other forensic entomological investigation.

New application of Exp-function method for improved Boussinesq equation

Energy Technology Data Exchange (ETDEWEB)

Abdou, M.A. [Theoretical Research Group, Physics Department, Faculty of Science, Mansoura University, 35516 Mansoura (Egypt); Department of Physics, Faculty of Education for Girls, Science Departments, King Khalid University, Bisha (Saudi Arabia)], E-mail: m_abdou_eg@yahoo.com; Soliman, A.A. [Department of Mathematics, Faculty of Education (AL-Arish) Suez Canal University, AL-Arish 45111 (Egypt); Department of Mathematics, Teacher' s College (Bisha), King Khalid University, Bisha, PO Box 551 (Saudi Arabia)], E-mail: asoliman_99@yahoo.com; El-Basyony, S.T. [Theoretical Research Group, Physics Department, Faculty of Science, Mansoura University, 35516 Mansoura (Egypt)

2007-10-01

The Exp-function method is used to obtain generalized solitary solutions and periodic solutions for nonlinear evolution equations arising in mathematical physics with the aid of symbolic computation method, namely, the improved Boussinesq equation. The method is straightforward and concise, and its applications is promising for other nonlinear evolution equations in mathematical physics.

BASINs and WEPP Climate Assessment Tools (CAT): Case Study Guide to Potential Applications (Final Report)

Science.gov (United States)

EPA announced the release of the final report, BASINs and WEPP Climate Assessment Tools (CAT): Case Study Guide to Potential Applications. This report supports application of two recently developed water modeling tools, the Better Assessment Science Integrating point & ...

[Joint application of 7 interventional pulmonology methods in early diagnosis of lung cancer].

Science.gov (United States)

Jin, Fa-Guang; Li, Wang-Ping; Mu, De-Guang; Chu, Dong-Ling; Fu, En-Qing; Xie, Yong-Hong; Lu, Jing-Li; Sun, Ya-Ni

2009-06-23

To evaluate the combination of 7 interventional pulmonology methods in early diagnosis of lung cancer. A total of 467 patients with thoracic and pulmonary lesions (include hilum pulmonis lymphadenectasis, mediastinal lymphadenectasis, pulmonary scobination, lump, lamellar infiltration, small amount of pleural fluid and pleural scobination) had negative results via exfoliative cytology, bacteriology and routine bronchoscopy. All these patients had ultrathin bronchoscopy with biopsy and brushing. For those 155 cases whose foci were located at porta pulmonis, inner zone or median zone, the authors applied ultrathin bronchoscopy with biopsy and brushing guided by X-ray. For those 95 cases whose foci were located at median zone or outer zone and unconnected with chest wall, per cutem lung puncture needle aspiration was employed under the guidance of X-ray. For those 102 cases whose foci were tightly connected with pleural membrane, per cutem lung puncture biopsy was employed under the guidance of type-B ultrasonic. For those 59 cases with suspected central airway foci, auto-fluorescence bronchoscopic biopsy and brushing were employed. For those 67 cases with hilum pulmonis or mediastinal lymphadenectasis, endobronchial ultrasonic transbronchial needle aspiration (EBUS-TBNA) was employed. For those 23 cases with small amount of pleural fluid or pleural scobination, electronic thoracoscopic biopsy and brushing were employed. It was found that 118 cases were diagnosed by ultrathin bronchoscopic biopsy and brushing with a positive rate of 25.3% (118/467), 105 cases by ultrathin bronchoscopy with biopsy and brushing guided by X-ray with a positive rate of 67.7% (105/155), 63 cases by per cutem lung puncture needle aspiration under the guidance of X-ray with a positive rate of 66.3% (63/95), 69 cases by per cutem lung puncture biopsy under the guidance of type-B ultrasound with a positive rate of 67.6% (69/102), 18 cases by auto-fluorescence bronchoscopic biopsy and brushing

An evaluation on CT image acquisition method for medical VR applications

Science.gov (United States)

Jang, Seong-wook; Ko, Junho; Yoo, Yon-sik; Kim, Yoonsang

2017-02-01

Recent medical virtual reality (VR) applications to minimize re-operations are being studied for improvements in surgical efficiency and reduction of operation error. The CT image acquisition method considering three-dimensional (3D) modeling for medical VR applications is important, because the realistic model is required for the actual human organ. However, the research for medical VR applications has focused on 3D modeling techniques and utilized 3D models. In addition, research on a CT image acquisition method considering 3D modeling has never been reported. The conventional CT image acquisition method involves scanning a limited area of the lesion for the diagnosis of doctors once or twice. However, the medical VR application is required to acquire the CT image considering patients' various postures and a wider area than the lesion. A wider area than the lesion is required because of the necessary process of comparing bilateral sides for dyskinesia diagnosis of the shoulder, pelvis, and leg. Moreover, patients' various postures are required due to the different effects on the musculoskeletal system. Therefore, in this paper, we perform a comparative experiment on the acquired CT images considering image area (unilateral/bilateral) and patients' postures (neutral/abducted). CT images are acquired from 10 patients for the experiments, and the acquired CT images are evaluated based on the length per pixel and the morphological deviation. Finally, by comparing the experiment results, we evaluate the CT image acquisition method for medical VR applications.

ARN Training Course on Advance Methods for Internal Dose Assessment: Application of Ideas Guidelines

International Nuclear Information System (INIS)

Rojo, A.M.; Gomez Parada, I.; Puerta Yepes, N.; Gossio, S.

2010-01-01

Dose assessment in case of internal exposure involves the estimation of committed effective dose based on the interpretation of bioassay measurement, and the assumptions of hypotheses on the characteristics of the radioactive material and the time pattern and the pathway of intake. The IDEAS Guidelines provide a method to harmonize dose evaluations using criteria and flow chart procedures to be followed step by step. The EURADOS Working Group 7 'Internal Dosimetry', in collaboration with IAEA and Czech Technical University (CTU) in Prague, promoted the 'EURADOS/IAEA Regional Training Course on Advanced Methods for Internal Dose Assessment: Application of IDEAS Guidelines' to broaden and encourage the use of IDEAS Guidelines, which took place in Prague (Czech Republic) from 2-6 February 2009. The ARN identified the relevance of this training and asked for a place for participating on this activity. After that, the first training course in Argentina took place from 24-28 August for training local internal dosimetry experts. (authors)

Designing a Mobile Application: The Case of iAdvocate

Directory of Open Access Journals (Sweden)

Alan R. Foley

2012-01-01

Full Text Available In this article, the design of a mobile application (app called iAdvocate is illustrated. The goal of iAdvocate is to share and develop specific strategies with parents of children with disabilities for working collaboratively with a school team to improve their children’s education. iAdvocate uses problem-based learning strategies, simulations, and provides contextual access resources to build parental advocacy skills and knowledge. iAdvocate provides parents with both information and strategies regarding their educational rights and getting their child’s needs met. The goal of iAdvocate is to share and develop specific strategies with parents for working collaboratively with a school team to improve their children’s education. iAdvocate contains three sections: strategies, a compilation of approaches that parents can pursue as advocates; resources, which lists and, where possible, links to such references as laws, books, articles, web sites, video presentations, and organizations that provide information on inclusive education; and, responses, which features simulated interactions, such as replies to common statements made by school professionals regarding services and accommodations for children. This case illustrates the design processes and techniques used to develop an instructional mobile application by presenting the background and context of the project, initial design and design iterations, negative case analysis, and prototyping. Additional documents illustrating the project background, and design process are also included.

About peculiarities of application of the method of fast expansions in the solution of the Navier-Stokes equations

Directory of Open Access Journals (Sweden)

A. D. Chernyshov

2017-01-01

Full Text Available The brief presentation of the method of fast expansions is given to solve nonlinear differential equations. Application  rules of the operator of fast expansions are specified for solving differential equations. According to the method of fast expansions, an unknown function can be represented as the sum of the boundary function and Fourier series sines and cosines for one variable. The special construction of the boundary functions leads to reasonably fast convergence of the Fourier series, so that for engineering calculations, it is sufficient to consider only the first three members. The method is applicable both to linear and nonlinear integro-differential systems. By means of applying the method of fast expansions to nonlinear Navier-Stokes equations the problem is reduced to a closed system of ordinary differential equations, which solution doesn't represent special difficulties. We can reapply the method of fast expansions to the resulting system of differential equations and reduce the original problem to a system of algebraic equations. If the problem is n-dimensional, then after n-fold application of the method of fast expansions the problem will be reduced to a closed algebraic system. Finally, we obtain an analytic-form solution of complicated boundary value problem in partial derivatives. The flow of an incompressible viscous fluid of Navier–Stokes is considered in a curvilinear pipe. The problem is reduced to solving a closed system of ordinary differential equations with boundary conditions by the method of fast expansions. The article considers peculiarities of finding the coefficients of boundary functions and Fourier coefficients for the zero-order and first-order operators of fast expansions. Obtaining the analytic-form solution is of great interest, because it allows to analyze and to investigate the influence of various factors on the properties of the viscous fluid in specific cases.