WorldWideScience

Sample records for capsaicinoid systems biology1cwoa

  1. Design and fabrication of a real-time measurement system for the capsaicinoid content of Korean red pepper (Capsicum annuum L.) powder by visible and near-infrared spectroscopy

    Science.gov (United States)

    This research aims to design and fabricate a system to measure the capsaicinoid content of red pepper powder in a non-destructive and rapid method through visible and near infrared spectroscopy (VNIR). The developed system scans a well-leveled powder surface continuously to minimize the influence of...

  2. Design and Fabrication of a Real-Time Measurement System for the Capsaicinoid Content of Korean Red Pepper (Capsicum annuum L. Powder by Visible and Near-Infrared Spectroscopy

    Directory of Open Access Journals (Sweden)

    Jongguk Lim

    2015-10-01

    Full Text Available This research aims to design and fabricate a system to measure the capsaicinoid content of red pepper powder in a non-destructive and rapid method using visible and near infrared spectroscopy (VNIR. The developed system scans a well-leveled powder surface continuously to minimize the influence of the placenta distribution, thus acquiring stable and representative reflectance spectra. The system incorporates flat belts driven by a sample input hopper and stepping motor, a powder surface leveler, charge-coupled device (CCD image sensor-embedded VNIR spectrometer, fiber optic probe, and tungsten halogen lamp, and an automated reference measuring unit with a reference panel to measure the standard spectrum. The operation program includes device interface, standard reflectivity measurement, and a graphical user interface to measure the capsaicinoid content. A partial least square regression (PLSR model was developed to predict the capsaicinoid content; 44 red pepper powder samples whose measured capsaicinoid content ranged 13.45–159.48 mg/100 g by per high-performance liquid chromatography (HPLC and 1242 VNIR absorbance spectra acquired by the pungency measurement system were used. The determination coefficient of validation (RV2 and standard error of prediction (SEP for the model with the first-order derivative pretreatment method for Korean red pepper powder were 0.8484 and ±13.6388 mg/100 g, respectively.

  3. Visualizing Capsaicinoids: Colorimetric Analysis of Chili Peppers

    Science.gov (United States)

    Thompson, Robert Q.; Chu, Christopher; Gent, Robin; Gould, Alexandra P.; Rios, Laura; Vertigan, Theresa M.

    2012-01-01

    A colorimetric method for total capsaicinoids in chili pepper ("Capsicum") fruit is described. The placental material of the pepper, containing 90% of the capsaicinoids, was physically separated from the colored materials in the pericarp and extracted twice with methanol, capturing 85% of the remaining capsaicinoids. The extract, evaporated and…

  4. Extraction, bioavailability, and bioefficacy of capsaicinoids

    OpenAIRE

    Muwen Lu; Chi-Tang Ho; Qingrong Huang

    2017-01-01

    Capsaicinoids are active constituents responsible for the pungent and spicy flavor in chili peppers. During the past few decades, various extraction methods of capsaicinoids from peppers have been developed with high yields. Through biological studies, pharmacological benefits have been reported such as pain relief, antiinflammation, anticancer, cardio-protection, as well as weight loss. In this paper, the extraction methods and bioavailability of capsaicinoids are reviewed and discussed. In ...

  5. Extraction, bioavailability, and bioefficacy of capsaicinoids

    Directory of Open Access Journals (Sweden)

    Muwen Lu

    2017-01-01

    Full Text Available Capsaicinoids are active constituents responsible for the pungent and spicy flavor in chili peppers. During the past few decades, various extraction methods of capsaicinoids from peppers have been developed with high yields. Through biological studies, pharmacological benefits have been reported such as pain relief, antiinflammation, anticancer, cardio-protection, as well as weight loss. In this paper, the extraction methods and bioavailability of capsaicinoids are reviewed and discussed. In addition, the pharmacological effects and their underlying mechanisms are also studied.

  6. Capsaicinoids content prediction model development for Korean red-pepper powder using a visible and near-infrared spectroscopy

    Science.gov (United States)

    Lim, Jongguk; Mo, Changyeun; Noh, Sang Ha; Kang, Sukwon; Lee, Kangjin; Kim, Moon S.

    2012-05-01

    A nondestructive, real-time pungency measuring system with visible and near-infrared spectroscopy has been recently developed to measure capsaicinoids content in Korean red-pepper powder. One hundred twenty-five red-pepper powder samples produced from 11 regions in Republic of Korea were used for this investigation. The visible and near-infrared absorption spectra in the range from 450 to 950 nm were acquired and used for the development of prediction models of capsaicinoids contents in red-pepper powders without any chemical pretreatment to the samples. Partial Least Squares Regression (PLSR) models were developed to predict the regional capsaicinoids contents using the acquired absorption spectra. The chemical analysis of the total capsaicinoids (capsaicin and dihydrocapsaicin) was performed by a high performance liquid chromatographic (HPLC) method. The determination coefficient of validation (RV 2) and the standard error of prediction (SEP) for the capsaicinoids content prediction model, for a representative region in this study, were 0.9585 and +/-10.147 mg/100g, respectively.

  7. Separation of capsaicin from capsaicinoids by macroporous resin adsorption chromatography.

    Science.gov (United States)

    Liu, Changxia; Liu, Ruican; Zhang, Peng; Chen, Yiming; Xu, Tao; Wang, Fang; Tan, Tianwei; Liu, Chunqiao

    2015-12-01

    The aim of present study is to develop an efficient and low-cost method for capsaicin production isolated from capsaicinoids by macroporous resin adsorption chromatography. HZ816 resin has shown the best adsorption and desorption capacities for capsaicin among other resins. To optimize the operating parameters for separation, initial concentration, diameter-to-height ratio, mobile phase ratio, and crystallization method were investigated. When capsaicinoids solution (5 g/L) was loaded onto the column (diameter-to-height ratio = 1:12) with ethanol/1% w/w NaOH (4:6, v/v) as the mobile phase, capsaicin was purified most effectively. By using acid neutralization as the crystallization method, the purity of capsaicin improved from 90.3 to 99.5% with 82.3% yield. In conclusion, this study provides a simple and low-cost method for the industrial-scale production of high-purity capsaicin.

  8. Evolution of Capsaicinoids in Peter Pepper (Capsicum annuum var. annuum) During Fruit Ripening.

    Science.gov (United States)

    Barbero, Gerardo F; de Aguiar, Ana C; Carrera, Ceferino; Olachea, Ángel; Ferreiro-González, Marta; Martínez, Julian; Palma, Miguel; Barroso, Carmelo G

    2016-08-01

    The evolution of individual and total contents of capsaicinoids present in Peter peppers (Capsicum annuum var. annuum) at different ripening stages has been studied. Plants were grown in a glasshouse and the new peppers were marked in a temporal space of ten days. The extraction of capsaicinoids was performed by ultrasound-assisted extraction with MeOH. The capsaicinoids nordihydrocapsaicin (n-DHC), capsaicin, dihydrocapsaicin, homocapsaicin, and homodihydrocapsaicin were analyzed by ultraperformance liquid chromatography (UHPLC)-fluorescence and identified by UHPLC-Q-ToF-MS. The results indicate that the total capsaicinoids increase in a linear manner from the first point of harvest at ten days (0.283 mg/g FW) up to 90 days, at which point they reach a concentration of 1.301 mg/g FW. The evolution as a percentage of the individual capsaicinoids showed the initial predominance of capsaicin, dihydrocapsaicin, and n-DHC. Dihydrocapsaicin was the major capsaicinoid up to day 50 of maturation. After 50 days, capsaicin became the major capsaicinoid as the concentration of dihydrocapsaicin fell slightly. The time of harvest of Peter pepper based on the total capsaicinoids content should be performed as late as possible. In any case, harvesting should be performed before overripening of the fruit is observed.

  9. Evolution of total and individual capsaicinoids in peppers during ripening of the Cayenne pepper plant (Capsicum annuum L.).

    Science.gov (United States)

    Barbero, Gerardo F; Ruiz, Aurora G; Liazid, Ali; Palma, Miguel; Vera, Jesús C; Barroso, Carmelo G

    2014-06-15

    The evolution of total capsaicinoids and the individual contents of the five major capsaicinoids: nordihydrocapsaicin, capsaicin, dihydrocapsaicin, homocapsaicin and homodihydrocapsaicin present in the Cayenne pepper (Capsicum annuum L.), during fruit ripening, has been established. Capsaicinoids begin to accumulate gradually in the peppers from the beginning of its development up to a maximum concentration (1,789 μmol/Kg FW). From this time there is initially a sharp decrease in the total capsaicinoid content (32%), followed by a gradual decrease until day 80 of ripening. The two major capsaicinoids present in the Cayenne pepper are capsaicin and dihydrocapsaicin, which represent between 79% and 90%, respectively, of total capsaicinoids depending on fruit ripening. The relative content of capsaicin differs from the evolution of the other four capsaicinoids studied.

  10. Capsaicinoids, chloropicrin and sulfur mustard: Possibilities for exposure biomarkers

    Directory of Open Access Journals (Sweden)

    Maija Pesonen

    2010-12-01

    Full Text Available Incapacitating and irritating agents produce temporary disability persisting for hours to days after the exposure. One can be exposed to these agents occupationally in industrial or other working environments. Also general public can be exposed in special circumstances, like industrial accidents or riots. Incapacitating and irritating agents discussed in this review are chloropicrin and capsaicinoids. In addition, we include sulfur mustard, which is an old chemical warfare agent and known to cause severe long-lasting injuries or even death. Chloropicrin that was used as a warfare agent in the World War I is currently used mainly as a pesticide. Capsaicinoids, components of hot pepper plants, are used by police and other law enforcement personnel as riot control agents. Toxicity of these chemicals is associated particularly with the respiratory tract, eyes and skin. Their acute effects are relatively well known but the knowledge of putative long-term effects is almost non-existent. Also, mechanisms of effects at cellular level are not fully understood. There is a need for further research to get better idea of health risks, particularly of long-term and low-level exposures to these chemicals. For this, exposure biomarkers are essential. Validated exposure biomarkers for capsaicinoids, chloropicrin and sulfur mustard do not exist so far. Metabolites and macromolecular adducts have been suggested biomarkers for sulfur mustard and these can already be measured qualitatively, but quantitative biomarkers await further development and validation. The purpose of this review is, based on the existing mechanistic and toxicokinetic information, to shed light on the possibilities for developing biomarkers for exposure biomonitoring of these compounds. It is also of interest to find ideas for early effect biomarkers considering the need for studies on subchronic and chronic toxicity.

  11. Pungency in paprika (Capsicum annuum). 1. Decrease of capsaicinoid content following cellular disruption.

    Science.gov (United States)

    Kirschbaum-Titze, Petra; Hiepler, Constanze; Mueller-Seitz, Erika; Petz, Michael

    2002-02-27

    The capsaicinoid content in fruits of Capsicum annuum decreased within several days to a level of only 10% of the starting value when cells were disrupted by homogenization. This decrease was not observed in fruits that were carefully cut into halves. The analysis of one half made it possible to determine the reference content at time zero for the second half. A much lower decrease was observed when minced fruits were stored under nitrogen, whereas storage under oxygen resulted in considerable losses of capsaicinoids, indicating oxidative processes as a cause for the decrease of capsaicinoid content.

  12. Pungency in paprika (Capsicum annuum). 2. Heterogeneity of capsaicinoid content in individual fruits from one plant.

    Science.gov (United States)

    Kirschbaum-Titze, Petra; Mueller-Seitz, Erika; Petz, Michael

    2002-02-27

    The capsaicinoid content of individual fruits from a single plant harvested at the same time after flowering exhibits a wide range of values with a rather uniform pattern for the ratio of capsaicin, dihydrocapsaicin, and nordihydrocapsaicin. This observation is confirmed by the analysis of fruits from a second and third plant and for several harvest times at different stages of maturity. Competition with lignin-like material, environmental influences, and subcellular distribution may play a role in the synthesis and transformation of capsaicinoids.

  13. The use of nanoencapsulation to decrease human skin irritation caused by capsaicinoids

    Directory of Open Access Journals (Sweden)

    Contri RV

    2014-02-01

    Full Text Available Renata V Contri,1 Luiza A Frank,2 Moacir Kaiser,1 Adriana R Pohlmann,1,3 Silvia S Guterres1,2 1Programa de Pós-Graduação em Ciências Farmacêuticas, 2Faculdade de Farmácia, 3Instituto de Química, Universidade Federal do Rio Grande do Sul, Porto Alegre, Rio Grande do Sul, Brazil Abstract: Capsaicin, a topical analgesic used in the treatment of chronic pain, has irritant properties that frequently interrupt its use. In this work, the effect of nanoencapsulation of the main capsaicinoids (capsaicin and dihydrocapsaicin on skin irritation was tested in humans. Skin tolerance of a novel vehicle composed of chitosan hydrogel containing nonloaded nanocapsules (CH-NC was also evaluated. The chitosan hydrogel containing nanoencapsulated capsaicinoids (CH-NC-CP did not cause skin irritation, as measured by an erythema probe and on a visual scale, while a formulation containing free capsaicinoids (chitosan gel with hydroalcoholic solution [CH-ET-CP] and a commercially available capsaicinoids formulation caused skin irritation. Thirty-one percent of volunteers reported slight irritation one hour after application of CH-NC-CP, while moderate (46% [CH-ET-CP] and 23% [commercial product] and severe (8% [CH-ET-CP] and 69% [commercial product] irritation were described for the formulations containing free capsaicinoids. When CH-NC was applied to the skin, erythema was not observed and only 8% of volunteers felt slight irritation, which demonstrates the utility of the novel vehicle. A complementary in vitro skin permeation study showed that permeation of capsaicinoids through an epidermal human membrane was reduced but not prevented by nanoencapsulation. Keywords: chitosan, nanocapsules, capsaicinoids, skin irritation, skin permeation

  14. Stability of Capsaicinoids and Antioxidants in Dry Hot Peppers under Different Packaging and Storage Temperatures

    Directory of Open Access Journals (Sweden)

    Qumer Iqbal

    2015-03-01

    Full Text Available The maintenance of the quality and storage life of perishable fruits and vegetables is a major challenge for the food industry. In this study, the effects of different temperatures, packaging materials and storage time on the stability of capsaicinoids and antioxidants, such as total carotenoids, ascorbic acid and total phenolic compounds, were studied in three commercially cultivated hot pepper hybrids, namely Sky Red, Maha and Wonder King. For this purpose, dry whole pods were packed in jute bags and low-density polyethylene bags (LDPE, stored for five months under controlled conditions at 20, 25 or 30 ○C and analyzed on Day 0 and at 50-day intervals until Day 150. The three hot pepper hybrids differed significantly with respect to their capsaicinoids and antioxidant concentrations, but the results indicated that with the increase in storage temperature and time, a gradual and steady decrease in these levels was equally observed for all hybrids. Overall, mean concentrations after five months were significantly reduced by 22.6% for ascorbic acid, 19.0% for phenolic compounds, 17% for carotenoids and 12.7% for capsaicinoids. The trends of capsaicinoids and antioxidants evolution were decreasing gradually during storage until Day 150, this effect being more pronounced at higher temperature. Furthermore, the disappearance rates of capsaicinoids and antioxidants were higher in peppers packed in jute bags than in those wrapped with LDPE. In conclusion, despite the sensitivity of capsaicinoids and antioxidants to oxygen, light and moisture, the packaging in natural jute or synthetic LDPE plastic bags, as well as the storage at ambient temperature preserved between 77.4% and 87.3% of the initial amounts of these health- and nutrition-promoting compounds during five months’ storage.

  15. HERENCIA DE CAPSAICINOIDES EN CHILE MANZANO (Capsicum pubescens R. y P.)

    OpenAIRE

    2010-01-01

    Los capsaicinoides son alcaloides importantes en la salud humana, alimentaria y farmaceútica, y sólo son producidos por plantas del género Capsicum. En este estudio se analizó la herencia del contenido de los tres principales capsaicinoides causantes del picor (nordihidro-, dihidro- y capsaicina), en 25 materiales genéticos de chile manzano (Capsicum pubescens R. y P.), que incluyen a cinco poblaciones (Huatusco, Zongolica, Tacámbaro, Puebla y Perú) más sus 20 cruzas interpoblacionales posibl...

  16. Fruit specific variability in capsaicinoid accumulation and transcription of structural and regulatory genes in Capsicum fruit.

    Science.gov (United States)

    Keyhaninejad, Neda; Curry, Jeanne; Romero, Joslynn; O'Connell, Mary A

    2014-02-01

    Accumulation of capsaicinoids in the placental tissue of ripening chile (Capsicum spp.) fruit follows the coordinated expression of multiple biosynthetic enzymes producing the substrates for capsaicin synthase. Transcription factors are likely agents to regulate expression of these biosynthetic genes. Placental RNAs from habanero fruit (Capsicum chinense) were screened for expression of candidate transcription factors; with two candidate genes identified, both in the ERF family of transcription factors. Characterization of these transcription factors, Erf and Jerf, in nine chile cultivars with distinct capsaicinoid contents demonstrated a correlation of expression with pungency. Amino acid variants were observed in both ERF and JERF from different chile cultivars; none of these changes involved the DNA binding domains. Little to no transcription of Erf was detected in non-pungent Capsium annuum or C. chinense mutants. This correlation was characterized at an individual fruit level in a set of jalapeño (C. annuum) lines again with distinct and variable capsaicinoid contents. Both Erf and Jerf are expressed early in fruit development, 16-20 days post-anthesis, at times prior to the accumulation of capsaicinoids in the placental tissues. These data support the hypothesis that these two members of the complex ERF family participate in regulation of the pungency phenotype in chile.

  17. Genome-wide diversity and association mapping for capsaicinoids and fruit weight in Capsicum annuum L

    Science.gov (United States)

    Accumulated capsaicinoid content and increased fruit size are traits resulting from Capsicum annuum domestication. In this study, we used a diverse collection of domesticated and wild C. annuum to generate 66,960 SNPs using genotyping by sequencing. Principal component analysis and identity by state...

  18. Capsaicinoids improve egg production by regulating ovary nuclear transcription factors against heat stress in quail.

    Science.gov (United States)

    Sahin, N; Orhan, C; Tuzcu, M; Juturu, V; Sahin, K

    2016-12-12

    To examine the molecular mechanism of capsaicinoid supplementation from capsicum extract, laying Japanese quail (n = 180, 5 weeks old) were reared either at 22°C for 24 h/d (thermoneutral, TN) or at 34°C for 8 h/d (heat stress, HS) and fed on one of three diets containing 0, 25 or 50 mg of capsaicinoids per kilogram for 12 weeks (2 × 3 factorial arrangement). The results revealed that exposure to HS decreased feed consumption by 10.7% and egg production by 13.6%, increased serum and ovary malondialdehyde (MDA) levels by 66.9% and 88.1%, respectively, and reduced ovary superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GSH-Px) activities by 28.3%, 48.7% and 43.8%, respectively. There were magnifications in the ovary nuclear factor kappa-light-chain-enhancer of activated B cell (NF-κB) levels by 42.4% and suppressions in nuclear factor (erythroid-derived 2)-like 2 (Nrf2), protein kinase B (Akt) and haem-oxygenase 1 (HO-1) levels by 29.2%, 38.2% and 30.7%, respectively, in heat-stressed quail. With increasing supplemental capsaicinoids, there were linear increases in egg production, antioxidant enzyme activity, linear decreases in ovary MDA and NF-κB levels and linear increases in ovary Nrf2, Akt and HO-1 levels at a greater extent in quail reared under TN condition than those reared under HS condition. Two-way treatment interactions showed that the degree of restorations in all response variables was more notable under the HS environment than under the TN environment as supplemental capsaicinoid level was increased. In conclusion, capsaicinoid supplementation alleviates oxidative stress through regulating the ovary nuclear transcription factors in heat-stressed quail.

  19. A simple analytical platform based on thin-layer chromatography coupled with paper-based analytical device for determination of total capsaicinoids in chilli samples.

    Science.gov (United States)

    Dawan, Phanphruk; Satarpai, Thiphol; Tuchinda, Patoomratana; Shiowatana, Juwadee; Siripinyanond, Atitaya

    2017-01-01

    A new analytical platform based on the use of thin-layer chromatography (TLC) coupled with paper-based analytical device (PAD) was developed for the determination of total capsaicinoids in chilli samples. This newly developed TLC-PAD is simple and low-cost without any requirement of special instrument or skillful person. The analysis consisted of two steps, i.e., extraction of capsaicinoids from chilli samples by using ethanol as solvent and separation of capsaicinoids by thin-layer chromatography (TLC) and elution of capsaicinoids from the TLC plate with in situ colorimetric detection of capsaicinoids on the PAD. For colorimetric detection, Folin-Ciocalteu reagent was used to detect phenolic functional group of capsaicinoids yielding the blue color. The blue color on the PAD was imaged by a scanner followed by evaluation of its grayscale intensity value by ImageJ program. This newly developed TLC-PAD method provided a linear range from 50 to 1000mgL(-1) capsaicinoids with the limit of detection as low as 50mgL(-1) capsaicinoids. The proposed method was applied to determine capsaicinoids in dried chilli and seasoning powder samples and the results were in good agreement with those obtained by HPLC method.

  20. Measurement of Capsaicinoids in Chiltepin Hot Pepper: A Comparison Study between Spectrophotometric Method and High Performance Liquid Chromatography Analysis

    Directory of Open Access Journals (Sweden)

    Alberto González-Zamora

    2015-01-01

    Full Text Available Direct spectrophotometric determination of capsaicinoids content in Chiltepin pepper was investigated as a possible alternative to HPLC analysis. Capsaicinoids were extracted from Chiltepin in red ripe and green fruit with acetonitrile and evaluated quantitatively using the HPLC method with capsaicin and dihydrocapsaicin standards. Three samples of different treatment were analyzed for their capsaicinoids content successfully by these methods. HPLC-DAD revealed that capsaicin, dihydrocapsaicin, and nordihydrocapsaicin comprised up to 98% of total capsaicinoids detected. The absorbance of the diluted samples was read on a spectrophotometer at 215–300 nm and monitored at 280 nm. We report herein the comparison between traditional UV assays and HPLC-DAD methods for the determination of the molar absorptivity coefficient of capsaicin (ε280=3,410 and ε280=3,720 M−1 cm−1 and dihydrocapsaicin (ε280=4,175 and ε280=4,350 M−1 cm−1, respectively. Statistical comparisons were performed using the regression analyses (ordinary linear regression and Deming regression and Bland-Altman analysis. Comparative data for pungency was determined spectrophotometrically and by HPLC on samples ranging from 29.55 to 129 mg/g with a correlation of 0.91. These results indicate that the two methods significantly agree. The described spectrophotometric method can be routinely used for total capsaicinoids analysis and quality control in agricultural and pharmaceutical analysis.

  1. Characterization of different Capsicum varieties by evaluation of their capsaicinoids content by high performance liquid chromatography, determination of pungency and effect of high temperature.

    Science.gov (United States)

    González-Zamora, Alberto; Sierra-Campos, Erick; Luna-Ortega, J Guadalupe; Pérez-Morales, Rebeca; Rodríguez Ortiz, Juan Carlos; García-Hernández, José L

    2013-10-31

    The chili pepper is a very important plant used worldwide as a vegetable, as a spice, and as an external medicine. In this work, eight different varieties of Capsicum annuum L. have been characterized by their capsaicinoids content. The chili pepper fruits were cultivated in the Comarca Lagunera region in North of Mexico. The qualitative and quantitative determination of the major and minor capsaicinoids; alkaloids responsible for the pungency level, has been performed by a validated chromatographic procedure (HPLC-DAD) after a preliminary drying step and an opportune extraction procedure. Concentrations of total capsaicinoids varied from a not detectable value for Bell pepper to 31.84 mg g(-1) dried weight for Chiltepín. Samples were obtained from plants grown in experimental field and in greenhouse without temperature control, in order to evaluate temperature effect. Analysis of the two principal capsaicinoids in fruits showed that the amount of dihydrocapsaicin was always higher than capsaicin. In addition, our results showed that the content of total capsaicinoids for the varieties Serrano, Puya, Ancho, Guajillo and Bell pepper were increased with high temperature, while the content of total capsaicinoids and Scoville heat units (SHU) for the varieties De árbol and Jalapeño decreased. However, the pungency values found in this study were higher for all varieties analyzed than in other studies.

  2. Characterization of Different Capsicum Varieties by Evaluation of Their Capsaicinoids Content by High Performance Liquid Chromatography, Determination of Pungency and Effect of High Temperature

    Directory of Open Access Journals (Sweden)

    Alberto González-Zamora

    2013-10-01

    Full Text Available The chili pepper is a very important plant used worldwide as a vegetable, as a spice, and as an external medicine. In this work, eight different varieties of Capsicum annuum L. have been characterized by their capsaicinoids content. The chili pepper fruits were cultivated in the Comarca Lagunera region in North of Mexico. The qualitative and quantitative determination of the major and minor capsaicinoids; alkaloids responsible for the pungency level, has been performed by a validated chromatographic procedure (HPLC-DAD after a preliminary drying step and an opportune extraction procedure. Concentrations of total capsaicinoids varied from a not detectable value for Bell pepper to 31.84 mg g−1 dried weight for Chiltepín. Samples were obtained from plants grown in experimental field and in greenhouse without temperature control, in order to evaluate temperature effect. Analysis of the two principal capsaicinoids in fruits showed that the amount of dihydrocapsaicin was always higher than capsaicin. In addition, our results showed that the content of total capsaicinoids for the varieties Serrano, Puya, Ancho, Guajillo and Bell pepper were increased with high temperature, while the content of total capsaicinoids and Scoville heat units (SHU for the varieties De árbol and Jalapeño decreased. However, the pungency values found in this study were higher for all varieties analyzed than in other studies.

  3. Interaction of capsaicinoids with cell membrane models does not correlate with pungency of peppers

    Science.gov (United States)

    Geraldo, Vananélia P. N.; Ziglio, Analine C.; Gonçalves, Débora; Oliveira, Osvaldo N.

    2017-04-01

    Mixed monolayers were prepared using phospholipids in order to mimic cell membranes and fractions of capsaicinoids (extracted from Malagueta, Caps-M, and Bhut Jolokia, Caps-B, peppers). According to their surface-pressure isotherms and polarization-modulated infrared reflection absorption spectra (PM-IRRAS), weak molecular-level interactions were observed between Caps and phospholipids. Both Caps-M and Caps-B penetrated into the alkyl tail region of the monolayer, interacted with the phosphate group of the phospholipids and affected hydration of their Cdbnd O groups. Since the physiological activity of Caps is not governed solely by interaction with cell membranes, it should require participation of a neuronal membrane receptor, e.g. vanilloid receptor (TRPV1).

  4. 辣椒碱应用研究进展%Research progress in the application of capsaicinoid

    Institute of Scientific and Technical Information of China (English)

    刘菲菲; 王兵; 曹建新

    2012-01-01

    辣椒碱是辣椒中主要辣味成分,具有多种生物活性。本文综述了辣椒碱在医药、食品保健、种植业、养殖业、涂料工业以及军事等方面的应用,并对其广阔的应用前景进行了展望。%Capsaicinoid is a principle pungent component of hot pepper fruit with physiological functions. The research progress of capsaicinoid on application such as food,medicine,coating,pesticide and national defense at home and abroad was reviewed, meanwhile its application prospect was discussed.

  5. Functional loss of pAMT results in biosynthesis of capsinoids, capsaicinoid analogs, in Capsicum annuum cv. CH-19 Sweet.

    Science.gov (United States)

    Lang, Yaqin; Kisaka, Hiroaki; Sugiyama, Ryuji; Nomura, Kenzo; Morita, Akihito; Watanabe, Tatsuo; Tanaka, Yoshiyuki; Yazawa, Susumu; Miwa, Tetsuya

    2009-09-01

    Capsaicinoids are responsible for the spicy flavor of pungent peppers (Capsicum). The cultivar CH-19 Sweet is a non-pungent pepper mutant derived from a pungent pepper strain, Capsicum annuum CH-19. CH-19 Sweet biosynthesizes capsaicinoid analogs, capsinoids. We determined the genetic and metabolic mechanisms of capsinoid biosynthesis in this cultivar. We analyzed the putative aminotransferase (pAMT) that is thought to catalyze the formation of vanillylamine from vanillin in the capsaicinoid biosynthetic pathway. Enzyme assays revealed that pAMT activity catalyzing vanillylamine formation was completely lost in CH-19 Sweet placenta tissue. RT-PCR analysis showed normal mRNA transcription of the pAMT gene; however, SNP analysis of the cDNA sequence showed a T nucleotide insertion at 1291 bp in the pAMT gene of CH-19 Sweet. This insertion formed a new stop codon, TGA, that prevented normal translation of the gene, and the pAMT protein did not accumulate in CH-19 Sweet as determined using Western blot analysis. We developed a dCAPS marker based on the T insertion in the pAMT gene of CH-19 Sweet, and showed that the pAMT genotype co-segregated with the capsinoid or capsaicinoid fruit phenotype in the F(2) population. The T insertion was not found in other pungent and non-pungent Capsicum lines, suggesting that it is specific to CH-19 Sweet. CH-19 Sweet's pAMT gene mutation is an example of a nonsense mutation in a single gene that alters a secondary metabolite biosynthetic pathway, resulting in the biosynthesis of analogs. The dCAPS marker will be useful in selecting lines with capsinoid-containing fruits in pepper-breeding programs.

  6. Volatile Compounds and Capsaicinoid Content of Fresh Hot Peppers (Capsicum Chinense Scotch Bonnet Variety at Red Stage

    Directory of Open Access Journals (Sweden)

    Arthur Gahungu

    2011-06-01

    Full Text Available The aim of this study was to evaluate the capsaicinoids content and the volatile compounds of fresh hot pepper from Burundi at red stage. The Capsaicinoids were extracted in acetone and separated using column chromatography on silica gel, then evaluated quantitatively using a reverse phase High performance liquid chromatography/Photodiode array detection (RP-HPLC/PAD. The volatile compounds were extracted by hydrodistillation and then re-extracted and concentrated by SPME fiber at 55ºC for 30 min and analyzed using Gas chromatography-mass spectrometry (GC-MS. Seventy volatile compounds were identified, of which aliphatic esters, alcohols, terpenoids and acids were the main classes. Hexyl pentanoate, hexyl isopentanoate, Pentyl 3- methylbutanoate, 10- undecenol, 3, 3- dimethyl cyclohexanol, β-chamigrene, Pentadecanoic acid, (E- 9- tetradecenoic acid and Hexadecanoic acid were found to be the major volatile constituents. Capsaicin (CAPS 47.632 mg/g and dihydrocapsaicin (DHCAPS 23.096 mg/g were the major capsaicinoids and their contents converted in Scoville heat value (142931 show that the Scotch Bonnet variety is a high hot chili pepper according to the Scoville scale.

  7. Comparison of Total Capsaicinoid Contents in Various Dry Pepper Varieties%不同干椒品种中辣椒素总含量的比较

    Institute of Scientific and Technical Information of China (English)

    周书栋; 杨博智; 欧阳娴; 黄林; 张竹青; 陈文超

    2011-01-01

    The contents of capsaicinoids and dihydrocapsaicin of 30 dry pepper varieties were determined by HPLC. The results indicated that the contents of capsaicinoids and dihydrocapsaicin changed with varieties. The variation coefficient of capsaicinoids and dihydrocapsaicin was 77.44% and 82.62% respectively and very high. The frequency distribution trends of capsaicinoids and dihydrocapsaicin contents were similar,and those of total capsaicinoids and pungency degree were also similar.%采用HPLC法对30份干椒品种中所含的辣椒素、二氢辣椒素含量进行了测定。结果表明:干椒中辣椒素和二氢辣椒素含量因品种而异,变异系数大,变异系数分别为77.44%和82.62%;辣椒素和二氢辣椒素含量的频次分布趋势基本相同;辣椒素总含量和辣度的频次分布趋势也基本相同。

  8. Variation of capsaicinoids in chilli (Capsicum frutescens L. cultivars with the maturity of fruits in middle hill conditions of western Himalayas

    Directory of Open Access Journals (Sweden)

    Pandey Hemant

    2010-01-01

    Full Text Available The three chilli (Capsicum frutescens L. cultivars viz. chilli DARL 210, Chilli Long Black and Sartoria were grown in middle hill climatic conditions of western Himalayas at an altitude of 5,500 feet above the sea level. The variation in total capsaicinoids (Capsaicin and dihydrocapsaicin was studied from budding to full maturity stage of fruits. The fruits were harvested at every fifteen days interval from flower budding (stage zero to full maturity stage (stage seven. The total capsaicinoids were evaluated with the help of HPLC. It can be concluded from the study that, to achieve maximum pungency (total capsaicinoids in these cultivars, the chilli cv. DARL 210 should be harvested at the stage of full maturity (after 105 days. Whereas, Chilli long black should be harvested after 75 days and cultivar Sartoria in between 60 to 90 days from flower budding stage. As far as pungency among these cultivars is concerned DARL 210 was the most pungent followed by Chilli Long black, while Sartoria was found least pungent cultivar.

  9. Effects of twelve weeks of capsaicinoid supplementation on body composition, appetite and self-reported caloric intake in overweight individuals.

    Science.gov (United States)

    Urbina, Stacie L; Roberts, Michael D; Kephart, Wesley C; Villa, Katelyn B; Santos, Emily N; Olivencia, Alyssa M; Bennett, Haley M; Lara, Marissa D; Foster, Cliffa A; Purpura, Martin; Jäger, Ralf; Taylor, Lem W; Wilborn, Colin D

    2017-02-21

    We examined if 12 weeks of capsaicinoid (CAP) supplementation affected appetite, body composition and metabolic health markers. Seventy seven healthy male and female volunteers (30 ± 1 y, 171.2 ± 9.8 cm, 81.0 ± 2.2 kg, 27.5 ± 0.6 kg/m(2)) were randomly assigned to ingest either low-dose CAP (2 mg/d; L-CAP, n = 27), high-dose CAP (4 mg/d; H-CAP, n = 22) from Capsimax or placebo (corn starch; PLA, n = 28) for 12 weeks. At baseline (0 WK), 6 weeks (6 WK) and 12 weeks (12 WK) waist: hip ratio, body composition via dual energy x-ray absorptiometry (DEXA, 0 WK and 12 WK only), self-reported Calorie intakes, appetite levels via Council on Nutrition Appetite Questionnaire (CNAQ) and serum metabolic health markers (0 WK and 12 WK only) were analyzed. Moreover, an oral glucose tolerance test (OGTT) was administered at 0 WK and 12 WK, and serum glucose and insulin responses were examined 30-120 min post test-drink consumption. Waist: hip ratio significantly decreased in L-CAP from 0 WK to 6 WK (p decreases in serum HDL cholesterol levels from WK0 to WK12. However, supplementation did not affect the insulin response to the administered OGTT and/or other indices of insulin sensitivity. These data suggest that H-CAP supplementation reduces self-reported energy intake after 12 weeks of supplementation, and L-CAP supplementation also reduces waist: hip ratio. Longer-term effects of capsaicinoid supplementation on basal insulin and cholesterol levels warrant further investigation.

  10. A comparative study of the capsaicinoid and phenolic contents and in vitro antioxidant activities of the peppers of the genus Capsicum: an application of chemometrics.

    Science.gov (United States)

    Sora, Gisele Teixeira Souza; Haminiuk, Charles Windson Isidoro; da Silva, Marcos Vieira; Zielinski, Acácio Antonio Ferreira; Gonçalves, Geferson Almeida; Bracht, Adelar; Peralta, Rosane Marina

    2015-12-01

    This paper presents a comparison of the contents of capsaicin, dihydrocapsaicin and total phenolics as well as of the antioxidant activities of six types of peppers of the genus Capsicum. The varieties were analyzed in terms of their in vitro antioxidant activity using ferric reducing antioxidant powder (FRAP), 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azinobis 3-ethylbenzothiazoline 6-sulfonate (ABTS(●+)) assays. The contents of phenolics and capsainoids as well as the antioxidant activities were higher in seeds than in pulps. The correlations (ρ < 0.01) between the phenolic composition and the capsaicinoids levels were high (r = 0.98). Similarly high were also the correlations between the antioxidant activities and the contents of total phenolics and capsaicinoids. Data were analyzed using principal component analysis (PCA), hierarchical cluster analysis (HCA) and multiple linear regression (MLR). PCA explained 97.77 % of the total variance of the data, and their separation into three groups in a scatter plot was divised. Using HCA, three clusters were suggested. Cluster one, formed by pulps (bell pepper, orange habanero, cayenne, dedo de moça and red habanero), showed the lowest levels of the compounds quantified. Most seed samples were grouped in cluster two (bell pepper, cayenne, dedo de moça and malagueta) together with malagueta pulp. Cluster three was formed by orange and red habanero seeds, which showed the highest levels of all compounds analyzed. The MRL revealed that the values of capsaicinoids and total phenols are more adequate to predict the antioxidant activity measured by the FRAP assay.

  11. Non-pungent Capsicum contains a deletion in the capsaicinoid synthetase gene, which allows early detection of pungency with SCAR markers.

    Science.gov (United States)

    Lee, Choong-Jae; Yoo, Eunyoung; Shin, Juhyun; Shin, Joo Hyun; Lee, Jemin; Hwang, Hee-Sook; Kim, Byung-Dong

    2005-04-30

    The capsaicinoid synthetase (CS) gene cosegregated perfectly with the C locus, which controls the presence of pungency, in 121 F2 individuals from a cross between 'ECW123R' and 'CM334', both of Capsicum annuum. We concluded that CS and C are tightly linked. Sequence analysis of the genes of four pungent and four non-pungent pepper lines showed that the non-pungent peppers had a 2,529 bp-deletion in the 5' upstream region of CS. We have developed molecular markers of the C locus to detect pungency at the seedling stage. Based on the deleted sequence, we developed five SCAR markers, two of them being codominant. These SCAR markers will be useful for easy, accurate, and early detection of non-pungent individuals in breeding programs.

  12. Research Progress on Capsaicinoids Biosynthetic Pathway and Its Related Genes%辣椒素类物质生物合成途径及其相关基因研究进展

    Institute of Scientific and Technical Information of China (English)

    吴智明; 程蛟文; 唐鑫; 胡开林

    2012-01-01

    辣椒素类物质是辣椒果实胎座中产生的特异辣味代谢产物的总称.辣椒素类物质在辣椒果实中的生物合成主要有两条途径:以苯丙氨酸为前体的苯丙烷途径和以缬氨酸或亮氨酸为前体的支链脂肪酸途径.本文综述了近年来国内外学者在辣椒素类物质生物合成过程中的主要酶类基因的克隆、基因表达调控机制研究方面取得的最新进展.%Capsaicinoids are the substances responsible for the pungent sensation that synthesize and accumulate unique in fruits placental tissues of Capsicum species. Capsaicinoids are biosynthesized through 2 pathways: phenylpropanoid and branched-chain fatty acid pathways, which provide the precursors phenylalanine and valine or leucine, respectively. This paper reviewed the new research progress on studying the enzymes and genes participating in the biosynthetic pathway and the regulatory process that accounts for different accumulation levels of capsaicinoids in chili pepper fruits.

  13. Effect of oral intake of capsaicinoid beadlets on catecholamine secretion and blood markers of lipolysis in healthy adults: a randomized, placebo controlled, double-blind, cross-over study

    Directory of Open Access Journals (Sweden)

    Shastri Sid

    2010-07-01

    Full Text Available Abstract Background In the present investigation we compared blood epinephrine (EPI, norepinephrine (NE, free fatty acids (FFA and glycerol concentrations in response to a capsaicinoid supplement or placebo in healthy adults before and after acute exercise. Methods Twenty subjects ingested a placebo or supplement (Capsimax™, OmniActive Health Technologies; 2 mg capsaicinoids in a microencapsulated matrix with one week separating conditions. Fasting blood samples were collected during each visit; 30 minutes following a rest period and before placebo or supplement intake (Pre; 2 hours post intake (2 hr; one minute following the cessation of 30 minutes of exercise performed at 65% of maximal heart rate reserve (2.5 hr; 90 minutes following the cessation of exercise (4 hr. Heart rate (HR, systolic (SBP and diastolic (DBP blood pressure were recorded at all times. Results A time effect was noted for HR, SBP, and DBP (p 0.05. However, a time effect was noted for all variables (p Conclusion Ingestion of low dose (2 mg Capsimax™ was associated with an increase in blood FFA and glycerol at selected times post ingestion, as compared to placebo. However, Capsimax™ had no differing effect on EPI or NE compared to placebo. Lastly, no difference was noted in HR, SBP, or DBP between placebo and Capsimax™.

  14. RAPID DETERMINATION OF CAPSAICINOIDS BY ULTRA PERFORMANCE LIQUID CHROMATOGRAPHY%超高效液相色谱法快速测定辣椒素类物质

    Institute of Scientific and Technical Information of China (English)

    赵春华; 侯倩慧; 余季金

    2011-01-01

    建立了超高效液相色谱法快速测定辣椒制品中辣椒素、二氢辣椒素、降二氢辣椒素的方法.样品以四氢呋喃-甲醇(体积比1:1)提取,采用反相高效液相色谱分离.色谱柱为BEH C18,流动相乙腈-水进行梯度洗脱;二极管阵列检测器(DAD),检测波长为280 nm.各成分在1.0 -100.0 mL/L范围内线性良好.辣椒素、二氢辣椒素测定结果的相对标准偏差分别为0.8%,1.2%(n=5),回收率分别为93.0%-100.0%,92.9% -97.4%.方法检出限为0.05 mg/mL,定量限为0.25 mg/mL.该法满足辣素等级评价相关标准的要求.%A rapid method was developed for determination of capsaicin, dihydroeapsaicin and nordihydroeapsaicin in capsa-icinoids by ultra performance liquid chromatography. The sample was extracted with tetrahydrofuran - methanol ( volume ratio was 1:1). The components were separated on a BEH C18 column by gradient elution with acetonitrile - water as the mobile phase, and detected with DAD at 280 nm. The linear range was 1.0 - 100.0 mL/L. The RSD were 0.8 % , 1.2% (n = 5) , and the recoveries were 93.0% -100.0% and 92.9% -97.4% for capsaicin and dihydroeapsaicin, respectively. LOD was0.05 mg/mL, and LOQ was 0.25 mg/mL. The method meets the requirements of pungency level evaluation on the industrial criterion.

  15. Ultrasound-Assisted Extraction and Heat Stability of Capsaicinoids from Doubanjiang (Bean Paste)%豆瓣中辣椒素类物质的超声波提取及其热稳定性

    Institute of Scientific and Technical Information of China (English)

    贾洪锋; 彭德川; 梁爱华; 何江红; 陈祖明; 贺稚非

    2012-01-01

    对豆瓣中辣椒素类物质的超声波提取条件(提取溶剂、提取温度、提取时间和提取次数)和豆瓣中辣椒素类物质的热稳定性进行研究。结果表明:最佳提取条件为超声波功率200w、超声波频率40kHz、2.5g豆瓣采用10mL甲醇提取两次、提取温度70℃、提取时间5min;热稳定性实验表明,随着加热温度的升高,豆瓣中辣椒素类物质的含量会逐渐下降,当温度达到130℃时,豆瓣中辣椒素类物质的含量开始下降,当温度达到200℃时,辣椒素类物质的含量明显下降。%A fast method has been developed for the extraction of capsaicinoids from Doubanjiang employing ultrasound- assisted extraction (UAE). The effects of operating parameters such as solvent type, temperature, extraction time and number of repeated extractions on the extraction rates of capaicin, dihydrocapsaicin and capsaicinoids were investigated. The optimum extraction conditions were ultrasound power of 200 W, ultrasound frequency of 40 kHz, Doubanjiang/methanol ratio of 2.5:10 (g/mL), temperature of 70 ℃, and twice-repeated extractions for 5 rain each time. The results of thermal stability experiments indicated that capsaicinoid contents in Doubanjiang began to gradually decrease as the temperature increased from 130℃ and exhibited a distinct decrease when the temperature was over 200 ℃.

  16. Determinação espectrofotométrica indireta de capsaicinoides em pimentas Capsicum a partir da reação com o complexo de Co(II com 4-(2-piridilazo resorcinol

    Directory of Open Access Journals (Sweden)

    Patrícia Tonon de Souza

    2014-01-01

    Full Text Available Capsaicinoids (CAPS are substances responsible for pungency in Capsicum. It is important to quantify these types of compounds owing to their broad application in food, pharmaceuticals, cosmetics and chemical weapons. In this work, we developed an indirect spectrophotometric method based on the colorimetric reaction between CAPS, Co(II 3.10×10-5 mol L-1 and 4-(2-pyridylazo resorcinol (PAR 6.23×10-5 and, in cachaça:water 92:8v/v solutions, for quantification of total CAPS in Capsicum peppers. The product of the reaction is CoPAR2CAPS2 and its absorption in aquo-ethanolic solution at 510 nm is proportional to the total CAPS concentration from 0.60 to 17.94 mg L-1. The values of limit of detection and limit of quantification were 0.0004 and 0.001 mg of CAPS/g of pepper, respectively, with 4% relative standard deviation. The developed method yielded similar results to those obtained from high performance liquid chromatography, with 95% of confidence.

  17. Rapid Determination of Capsaicinoids in Hotpot Seasoning by High-Performance Liquid Chromatography%高效液相色谱法测定火锅底料中辣椒素类物质

    Institute of Scientific and Technical Information of China (English)

    尼海峰; 但晓容; 李栋钢

    2014-01-01

    A rapid method of high-pressure liquid chromatography (HPLC)is developed to determine the pungency components (capsaicin and dihydrocapsaicin)in hotpot seasoning.The column is RP-C1 8 (4.6 mm×250 mm,5 μm).The mobile phase is mixture of methanol and water (65 ∶35 )with an isocratic flow of 1 mL/min.The temperature of column is 30 ℃,the injection volume is 10 μL,and the UV wavelength is 280 nm.Ultrasonic assisted extraction is used to extract the capsaicinoids in hotpot seasoning.It shows that the content of capsaicin and dihydrocapsaicin is 0.256 ~0.81 6 g/kg, Scoville index is 3948~12583 SHU.%为了测定火锅底料中的辣味物质(辣椒素及二氢辣椒素),建立了高效液相色谱快速检测方法:色谱柱为 C18 InertSustain (4.6 mm ×250 mm,5μm),流动相为甲醇和水(V/V,65∶35),流速1.0 mL/min,柱温30℃,进样量10μL,检测波长280 nm。辣椒素类物质的提取采用超声波辅助提取。结果表明:火锅底料中的辣椒素类物质含量在0.256~0.816 g/kg 之间,斯科维尔系数在3948~12583 SHU。

  18. Development of the pungency measuring system for red-pepper powder

    Science.gov (United States)

    Mo, Changyeun; Lee, Kangjin; Lim, Jong-Guk; Kang, Sukwon; Lee, Hyun-Dong; Cho, Byoung-Kwan

    2011-06-01

    Many researchers have been tried to find a rapid pungency measuring method for the capsaicinoids, the main component of spicy to overcome the disadvantages of the conventional HPLC measurement which is labor-intensive, time-consuming, and expensive. In this research, an on-line based pungency measuring system for red-pepper powder was developed using a UV/Visible/Near-Infrared spectrometer with the wavelength range of 400 ~ 1050 nm. The system was constructed with a charge-couple device(CCD) spectrometer, a reference measuring unit, and a sample transfer unit. Predetermined non-spicy red-pepper powder were mixed with spicy one (var. Chungyang) to produce samples with a wide range of spicy levels. Total 33 different samples with 11 spicy levels and three particle size(below 0.425 mm, 0.425 ~ 0.71 mm, 0.71 ~ 1.4 mm) were prepared for measurements. The Partial Least Square Regression Model (PLSR model) was developed to predict the capsaicinoids content with the obtained spectra using the developed pungency measuring system and compared with the results measured by HPLC. The best result of PLSR model (R2 = 0.979, SEP = +/- 6.56 mg%) was achieved for the spectra of red-pepper powders of the particle size below 1.4 mm with a pretreatment of smoothing with a 6.5 nm wavelength gap. The results show the potential of NIRS technique for non-destructive and on-line measurement of capsaicinoids content in red-pepper powder.

  19. Determination of capsaicinoids and eugenol in waste-edible-oil by liquid-liquid extraction and liquid chromatography-tandem mass spectrometry%液-液萃取-液相色谱-串联质谱法测定"地沟油"中辣椒碱类化合物及丁香酚

    Institute of Scientific and Technical Information of China (English)

    张忠; 任飞; 张盼

    2012-01-01

    建立了"地沟油"中辣椒碱类化合物(包括辣椒素、二氢辣椒素、合成辣椒素)及丁香酚的液-液萃取及液相色谱-串联质谱(LC-MS/MS)检测方法."地沟油"中辣椒碱类化合物及丁香酚用甲醇萃取,采用SUPEL COSIL ABZ + Plus dC18色谱柱(150 mm ×4.6 mm,5 μm)分离,电喷雾离子源在正、负离子模式下电离,多反应监测(MRM)模式扫描.对辣椒素、二氢辣椒素、合成辣椒素及丁香酚的检出限分别为0.02、0.03、0.03和0.6μg/L,且在一定的质量浓度范围内线性良好.同一操作人员与不同操作人员间测定的精密度低于5%.该方法专属性强、灵敏、准确,可以作为"地沟油"的判定标准之一.%A method was developed for the determination of capsaicinoids ( capsaicin, dihydrocapsaicin and synthetic capsaicin) and eugenol in waste-edible-oil extracted by liquid-liquid extraction and liquid chromatography-tandem mass spectrometry ( LC-MS/MS). The capsaicinoids and eugenol in waste-edible-oil were extracted by methanol, and then separated by a SUPEL COSIL ABZ +Plus dC18 column (150 mm x4. 6 mm, 5 ^m). The analysis was performed by MS/MS with electrospray ionization in positive and negative ion modes with multiple reaction monitoring (MRM). The limits of detection for capsaicin, dihydrocapsaicin, synthetic capsaicin and eugenol were 0.02, 0.03, 0.03 and 0. 6 n.g/L, respectively. The good linear relationships were obtained in certain concentration ranges of capsaicinoids and eugenol. The relative standard deviations (RSDs, n - 5) of same-worker and different-worker were less than 5%. The method is exclusive, sensitive and accurate, and can be used in waste-edible-oil determination.

  20. Synthesis and Characterization of New Members of Capsaicinoids and Preliminary Research on the Relationship between the Strcture and Pungency%辣椒碱新同系物的合成、表征及辣构关系的初步探讨

    Institute of Scientific and Technical Information of China (English)

    王俊莲; 周圣泽; 彭争宏; 周祥凤; 张孝彬; 彭必先

    2011-01-01

    Two new members of capsaicinoids, N-(4-hydroxy-3-methoxybenzyl)-8-methylnon-trans-4-enamide and N-(4-hydroxy-3-methoxybenzyl)-3,7-dimethyloct-6-enamide, were synthesized, and their structures were confirmed by elemental analysis, FT-IR, 1H NMR,13C NMR etc.Meanwhile, their pungencies were determined through scoville organoleptic test and compared with capsaicin, norcapsaicin and homocapsicin.The double bond location, branch chain and length of the alcyl chain were confirmed to be the structural factors that could affect the pungency remarkably.%合成了两种辣椒碱同系物的新成员:反-N-(4-羟基-3-甲氧基苄基)-8-甲基-4-壬烯酰胺和N-(4-羟基-3-甲氧基苄基)-3,7-二甲基-6-辛烯酰胺,并用元素分析,FT-IR,1H NMR,13C NMR等方法对其结构进行了表征,还用斯科维尔感官评定的方法对其辣度进行了测定,分别为1.2×107和3.0×106SHU.并将它们的结构和辣度与辣椒碱、降辣椒碱和高辣椒碱进行了对比,总结出影响辣椒碱同系物辣度的结构因子为脂酰基双键的位置、脂酰基主链的长度及支链.

  1. Development of a pungency measuring system for red-pepper powder

    Science.gov (United States)

    Capsaicinoids are the main components that determine the spiciness level of red-pepper powders. Current pungency measurement is mostly dependent on HPLC measurement technique, which is a sample-destructive, labor-intensive, time-consuming, and expensive method. In this research, a nondestructive on-...

  2. Capsaicinoides, Vitamina C y Heterosis durante el desarrollo del fruto de Chile manzano

    OpenAIRE

    Ana B. Cruz Pérez; Víctor A. González Hernández; Ramón Marcos Soto Hernández; Alfonso A. Gardea Béjar; M. Alejandra Gutiérrez Espinosa; Mario Pérez Grajalez

    2007-01-01

    Existe poca información acerca del uso de dietas con baja proteína cruda (PC) para cerdos en iniciación. Por tanto, se realizaron dos experimentos para determinar el porcentaje mínimo de PCen dietas sorgo-pasta de soya que no afecte el comportamientoproductivo, utilizando urea en plasma como indicador. En el experimento 1, los tratamientos (% PC) fueron: T1) testigo 20.5;T2) 19.0; T3) 17.5; T4) 16.0; T5) 14.5, y se aplicaron a 10 cerditasen iniciación usando un diseño cruzado con periodos de ...

  3. Where did the chili get its spice? Biogeography of capsaicinoid production in ancestral wild chili species.

    Science.gov (United States)

    Tewksbury, Joshua J; Manchego, Carlos; Haak, David C; Levey, Douglas J

    2006-03-01

    The biogeography of pungency in three species of wild chili in the chaco and surrounding highland habitats of southeastern Bolivia is described. We report that Capsicum chacoense, C. baccatum, and C. eximium are polymorphic for production of capsaicin and its analogs, such that completely pungent and completely nonpungent individuals co-occur in some populations. In C. chacoense, the density of plants and the proportion of pungent plants increased with elevation. Above 900 m, all individuals in all populations except two were pungent; nonpungent individuals in at least one of the two polymorphic populations were likely a result of spreading by humans. The occurrence of pungent and nonpungent individuals in three species of ancestral Capsicum and the geographic variation of pungency within species suggest that production of capsaicin and its analogs entails both costs and benefits, which shift from one locality to another. Determining the selection pressures behind such shifts is necessary to understand the evolution of pungency in chilies.

  4. Activation of CFTR-mediated CI-Transport by Capsaicinoids in Cell Culture Model

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xue-liang; HOU Ting-ting; GE Hong; SUN Juan-juan; YANG Hong; MA Tong-hui

    2009-01-01

    Previous studies reported that capsaicin potentiates ΔF508 mutant cystic fibrosis transmembrane conductance regulator(CFTR) channel gating defect by transfected cell-based assays.It has been postulated that orally ingested capsaicin may conceptually be used to develop a therapeutic strategy to treat gastrointestinal disorders in CF patients.We tried to reproduce and extend those pre-clinical data of previous studies.Cell-based fluorescence functional measurements in Fischer thyroid epithelial cells(FRT) expressing CFTR showed no effect of capsaicin on potentiating ΔF508-CFTR.while genistein showed a strongly positive activity.Studies show that capsaicin and dihydrocapsaicin activated cAMP-prestimulated wild-type CFTR in a dose-dependent manner with a maximal response of 70% of that activated by genistein,thus gave an apparent EC50 of (40.4±6.8)μmol/L and (150.2±7.4) μmol/L respectively.Preliminary study shows that the binding sites for capsaicin and dihydrocapsaicin may be probably partially overlapped with that for genistein because the maximal activation of wild-type CFTR with genistein is partially blocked by capsaicin and dihydrocapsaicin.

  5. systems

    Directory of Open Access Journals (Sweden)

    Alexander Leonessa

    2000-01-01

    Full Text Available A nonlinear robust control-system design framework predicated on a hierarchical switching controller architecture parameterized over a set of moving nominal system equilibria is developed. Specifically, using equilibria-dependent Lyapunov functions, a hierarchical nonlinear robust control strategy is developed that robustly stabilizes a given nonlinear system over a prescribed range of system uncertainty by robustly stabilizing a collection of nonlinear controlled uncertain subsystems. The robust switching nonlinear controller architecture is designed based on a generalized (lower semicontinuous Lyapunov function obtained by minimizing a potential function over a given switching set induced by the parameterized nominal system equilibria. The proposed framework robustly stabilizes a compact positively invariant set of a given nonlinear uncertain dynamical system with structured parametric uncertainty. Finally, the efficacy of the proposed approach is demonstrated on a jet engine propulsion control problem with uncertain pressure-flow map data.

  6. SYSTEM

    Directory of Open Access Journals (Sweden)

    K. Swarnalatha

    2013-01-01

    Full Text Available Risk analysis of urban aquatic systems due to heavy metals turns significant due to their peculiar properties viz. persis tence, non-degradab ility, toxicity, and accumulation. Akkulam Veli (AV, an urba n tropical lake in south India is subjected to various environmental stresses due to multiple waste discharge, sand mining, developmental activities, tour ism related activitie s etc. Hence, a comprehensive approach is adopted for risk assessment using modified degree of contamination factor, toxicity units based on numerical sediment quality guidelines (SQGs, and potentialecological risk indices. The study revealed the presence of toxic metals such as Cr, C d, Pb and As and the lake is rated under ‘low ecological risk’ category.

  7. A comparative study of the capsaicinoid and phenolic contents and in vitro antioxidant activities of the peppers of the genus Capsicum: an application of chemometrics

    OpenAIRE

    Sora, Gisele Teixeira Souza; Haminiuk, Charles Windson Isidoro; da Silva, Marcos Vieira; Zielinski,Acácio Antonio Ferreira; Gonçalves, Geferson Almeida; Bracht, Adelar; Peralta,Rosane Marina

    2015-01-01

    This paper presents a comparison of the contents of capsaicin, dihydrocapsaicin and total phenolics as well as of the antioxidant activities of six types of peppers of the genus Capsicum. The varieties were analyzed in terms of their in vitro antioxidant activity using ferric reducing antioxidant powder (FRAP), 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2’-azinobis 3-ethylbenzothiazoline 6-sulfonate (ABTS●+) assays. The contents of phenolics and capsainoids as well as the antioxidant activiti...

  8. System Budgets

    DEFF Research Database (Denmark)

    Jeppesen, Palle

    1996-01-01

    The lecture note is aimed at introducing system budgets for optical communication systems. It treats optical fiber communication systems (six generations), system design, bandwidth effects, other system impairments and optical amplifiers.......The lecture note is aimed at introducing system budgets for optical communication systems. It treats optical fiber communication systems (six generations), system design, bandwidth effects, other system impairments and optical amplifiers....

  9. Gradient systems and mechanical systems

    Institute of Scientific and Technical Information of China (English)

    Fengxiang Mei; Huibin Wu

    2016-01-01

    All types of gradient systems and their properties are discussed. Two problems connected with gradient sys-tems and mechanical systems are studied. One is the direct problem of transforming a mechanical system into a gradi-ent system, and the other is the inverse problem, which is transforming a gradient system into a mechanical system.

  10. Thermal systems; Systemes thermiques

    Energy Technology Data Exchange (ETDEWEB)

    Lalot, S. [Valenciennes Univ. et du Hainaut Cambresis, LME, 59 (France); Lecoeuche, S. [Ecole des Mines de Douai, Dept. GIP, 59 - Douai (France)]|[Lille Univ. des Sciences et Technologies, 59 - Villeneuve d' Ascq (France); Ahmad, M.; Sallee, H.; Quenard, D. [CSTB, 38 - Saint Martin d' Heres (France); Bontemps, A. [Universite Joseph Fourier, LEGI/GRETh, 38 - Grenoble (France); Gascoin, N.; Gillard, P.; Bernard, S. [Laboratoire d' Energetique, Explosion, Structure, 18 - Bourges (France); Gascoin, N.; Toure, Y. [Laboratoire Vision et Robotique, 18 - Bourges (France); Daniau, E.; Bouchez, M. [MBDA, 18 - Bourges (France); Dobrovicescu, A.; Stanciu, D. [Bucarest Univ. Polytechnique, Faculte de Genie Mecanique (Romania); Stoian, M. [Reims Univ. Champagne Ardenne, Faculte des Sciences, UTAP/LTM, 51 (France); Bruch, A.; Fourmigue, J.F.; Colasson, S. [CEA Grenoble, Lab. Greth, 38 (France); Bontemps, A. [Universite Joseph Fourier, LEGI/GRETh, 38 - Grenoble (France); Voicu, I.; Mare, T.; Miriel, J. [Institut National des Sciences Appliquees (INSA), LGCGM, IUT, 35 - Rennes (France); Galanis, N. [Sherbrooke Univ., Genie Mecanique, QC (Canada); Nemer, M.; Clodic, D. [Ecole des Mines de Paris, Centre Energetique et Procedes, 75 (France); Lasbet, Y.; Auvity, B.; Castelain, C.; Peerhossaini, H. [Nantes Univ., Ecole Polytechnique, Lab. de Thermocinetiquede Nantes, UMR-CNRS 6607, 44 (France)

    2005-07-01

    This session about thermal systems gathers 26 articles dealing with: neural model of a compact heat exchanger; experimental study and numerical simulation of the thermal behaviour of test-cells with walls made of a combination of phase change materials and super-insulating materials; hydraulic and thermal modeling of a supercritical fluid with pyrolysis inside a heated channel: pre-dimensioning of an experimental study; energy analysis of the heat recovery devices of a cryogenic system; numerical simulation of the thermo-hydraulic behaviour of a supercritical CO{sub 2} flow inside a vertical tube; mixed convection inside dual-tube exchangers; development of a nodal approach with homogenization for the simulation of the brazing cycle of a heat exchanger; chaotic exchanger for the cooling of low temperature fuel cells; structural optimization of the internal fins of a cylindrical generator; a new experimental approach for the study of the local boiling inside the channels of exchangers with plates and fins; experimental study of the flow regimes of boiling hydrocarbons on a bundle of staggered tubes; energy study of heat recovery exchangers used in Claude-type refrigerating systems; general model of Carnot engine submitted to various operating constraints; the free pistons Stirling cogeneration system; natural gas supplied cogeneration system with polymer membrane fuel cell; influence of the CRN coating on the heat flux inside the tool during the wood unrolling process; transport and mixture of a passive scalar injected inside the wake of a Ahmed body; control of a laser welding-brazing process by infrared thermography; 2D self-adaptative method for contours detection: application to the images of an aniso-thermal jet; exergy and exergy-economical study of an 'Ericsson' engine-based micro-cogeneration system; simplified air-conditioning of telephone switching equipments; parametric study of the 'low-energy' individual dwelling; brief synthesis of

  11. Data Systems vs. Information Systems

    OpenAIRE

    Amatayakul, Margret K.

    1982-01-01

    This paper examines the current status of “hospital information systems” with respect to the distinction between data systems and information systems. It is proposed that the systems currently existing are incomplete data dystems resulting in ineffective information systems.

  12. Multibody Systems

    DEFF Research Database (Denmark)

    Wagner, Falko Jens

    1999-01-01

    Multibody Systems is one area, in which methods for solving DAEs are of special interst. This chapter is about multibody systems, why they result in DAE systems and what kind of problems that can arise when dealing with multibody systems and formulating their corresponding DAE system....

  13. Systems effectiveness

    CERN Document Server

    Habayeb, A R

    1987-01-01

    Highlights three principal applications of system effectiveness: hardware system evaluation, organizational development and evaluation, and conflict analysis. The text emphasizes the commonality of the system effectiveness discipline. The first part of the work presents a framework for system effectiveness, partitioning and hierarchy of hardware systems. The second part covers the structure, hierarchy, states, functions and activities of organizations. Contains an extended Appendix on mathematical concepts and also several project suggestions.

  14. Intelligent Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — The autonomous systems (AS) project, led by NASA Ames, is developing software for system operation automation. AS technology will help astronauts make more decisions...

  15. Systemic Assurance

    Science.gov (United States)

    2015-07-31

    storage devices (such as disk drives and SSDs) as well as a wide range of embedded controls. This phenomenon has been labeled the Internet of Things ( IoT ...environment involves interlinking with other systems, working in coalitions, relying on civil infrastructure, and use of personal devices . • Modern systems...The system-of-system approach can also involve use of mobile devices , forward-deployed capabilities for managing and analyzing large amounts of data

  16. Expert System

    DEFF Research Database (Denmark)

    Hildebrandt, Thomas Troels; Cattani, Gian Luca

    2016-01-01

    An expert system is a computer system for inferring knowledge from a knowledge base, typically by using a set of inference rules. When the concept of expert systems was introduced at Stanford University in the early 1970s, the knowledge base was an unstructured set of facts. Today the knowledge b...

  17. Retrofitting Systems

    DEFF Research Database (Denmark)

    Rose, Jørgen

    1997-01-01

    This report gives an overview of the different retrofitting possibilities that are available today. The report looks at both external and internal systems for external wall constructions, roof constructions, floor constructions and foundations. All systems are described in detail in respect to use...... and methods, and the efficiency of the different systems are discussed....

  18. Systems Engineering

    Science.gov (United States)

    Pellerano, Fernando

    2015-01-01

    This short course provides information on what systems engineering is and how the systems engineer guides requirements, interfaces with the discipline leads, and resolves technical issues. There are many system-wide issues that either impact or are impacted by the thermal subsystem. This course will introduce these issues and illustrate them with real life examples.

  19. Operating systems

    CERN Document Server

    Tsichritzis, Dionysios C; Rheinboldt, Werner

    1974-01-01

    Operating Systems deals with the fundamental concepts and principles that govern the behavior of operating systems. Many issues regarding the structure of operating systems, including the problems of managing processes, processors, and memory, are examined. Various aspects of operating systems are also discussed, from input-output and files to security, protection, reliability, design methods, performance evaluation, and implementation methods.Comprised of 10 chapters, this volume begins with an overview of what constitutes an operating system, followed by a discussion on the definition and pr

  20. Cryogenic Systems

    Science.gov (United States)

    Hosoyama, Kenji

    2002-02-01

    In this lecture we discuss the principle of method of cooling to a very low temperature, i.e. cryogenic. The "gas molecular model" will be introduced to explain the mechanism cooling by the expansion engine and the Joule-Thomson expansion valve. These two expansion processes are normally used in helium refrigeration systems to cool the process gas to cryogenic temperature. The reverse Carnot cycle will be discussed in detail as an ideal refrigeration cycle. First the fundamental process of liquefaction and refrigeration cycles will be discussed, and then the practical helium refrigeration system. The process flow of the system and the key components; -compressor, expander, and heat exchanger- will be discussed. As an example of an actual refrigeration system, we will use the cryogenic system for the KEKB superconducting RF cavity. We will also discuss the liquid helium distribution system, which is very important, especially for the cryogenic systems used in accelerator applications. 1 Principles of Cooling and Fundamental Cooling Cycle 2 Expansion engine, Joule-Thomson expansion, kinetic molecular theory, and enthalpy 3 Liquefaction Systems 4 Refrigeration Systems 5 Practical helium liquefier/refrigeration system 6 Cryogenic System for TRISTAN Superconducting RF Cavity

  1. Capsicum--production, technology, chemistry, and quality. Part V. Impact on physiology, pharmacology, nutrition, and metabolism; structure, pungency, pain, and desensitization sequences.

    Science.gov (United States)

    Govindarajan, V S; Sathyanarayana, M N

    1991-01-01

    The spice Capsicum is the fruit of the cultivated species of the genus Capsicum (family, Solanaceae), C. annuum principally, and C. frutescens L. to a lesser extent. A third variety of C. annuum var. annuum fruits, the large-sized, fleshy bell capsicum is used as a fresh vegetable and valued for its aroma, color, and crisp texture, but with no pungency. This variety is not considered in this series of reviews covering primary processing, production, international trade, chemistry, and biochemistry of functional components--the red keto carotenoids, the aromatic volatiles and the pungent capsaicinoids in Parts I to III. The valid qualitative aspects correlating the specific components of capsicum and their sensory responses are critically covered in Part IV. In this the concluding part of the series of reviews, the significant preference of the spice for initially evoking an aversive response, its potent physiological and pharmacological effects, and the aspects of structure-activity relationships of the pungent stimuli of the capsaicinoids are reviewed. The beneficial effects particularly associated with long usage by some ethnic groups and its safe consumption levels, with a critical review of the studies on the gastrointestinal tract, the cardiovascular system, the sensory system, thermoregulation, nutritional impacts, and an overview of the five series is also detailed.

  2. Biological Activities of Red Pepper (Capsicum annuum) and Its Pungent Principle Capsaicin: A Review.

    Science.gov (United States)

    Srinivasan, Krishnapura

    2016-07-03

    Capsaicin, the pungent alkaloid of red pepper (Capsicum annuum) has been extensively studied for its biological effects which are of pharmacological relevance. These include: cardio protective influence, antilithogenic effect, antiinflammatory, and analgesia, thermogenic influence, and beneficial effects on gastrointestinal system. Therefore, capsaicinoids may have the potential clinical value for pain relief, cancer prevention and weight loss. It has been shown that capsaicinoids are potential agonists of capsaicin receptor (TRPV1). They could exert the effects not only through the receptor-dependent pathway but also through the receptor-independent one. The involvement of neuropeptide Substance P, serotonin, and somatostatin in the pharmacological actions of capsaicin has been extensively investigated. Topical application of capsaicin is proved to alleviate pain in arthritis, postoperative neuralgia, diabetic neuropathy, psoriasis, etc. Toxicological studies on capsaicin administered by different routes are documented. Capsaicin inhibits acid secretion, stimulates alkali and mucus secretion and particularly gastric mucosal blood flow which helps in prevention and healing of gastric ulcers. Antioxidant and antiinflammatory properties of capsaicin are established in a number of studies. Chemopreventive potential of capsaicin is evidenced in cell line studies. The health beneficial hypocholesterolemic influence of capsaicin besides being cardio protective has other implications, viz., prevention of cholesterol gallstones and protection of the structural integrity of erythrocytes under conditions of hypercholesterolemia. Beneficial influences of capsaicin on gastrointestinal system include digestive stimulant action and modulation of intestinal ultrastructure so as to enhance permeability to micronutrients.

  3. Material Systems

    DEFF Research Database (Denmark)

    Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael;

    2009-01-01

    This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system - a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project...... approaches the subject through the construction of a logic-driven system aiming to explore the possibilities of a material system that fulfills spatial, structural and performative requirements concurrently and how these are negotiated in situations where they might be conflicting....

  4. Recommender systems

    CERN Document Server

    Kembellec, Gérald; Saleh, Imad

    2014-01-01

    Acclaimed by various content platforms (books, music, movies) and auction sites online, recommendation systems are key elements of digital strategies. If development was originally intended for the performance of information systems, the issues are now massively moved on logical optimization of the customer relationship, with the main objective to maximize potential sales. On the transdisciplinary approach, engines and recommender systems brings together contributions linking information science and communications, marketing, sociology, mathematics and computing. It deals with the understan

  5. Energetic Systems

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetic Systems Division provides full-spectrum energetic engineering services (project management, design, analysis, production support, in-service support,...

  6. Intelligent systems

    CERN Document Server

    Irwin, J David

    2011-01-01

    Technology has now progressed to the point that intelligent systems are replacing humans in the decision making processes as well as aiding in the solution of very complex problems. In many cases intelligent systems are already outperforming human activities. Artificial neural networks are not only capable of learning how to classify patterns, such images or sequence of events, but they can also effectively model complex nonlinear systems. Their ability to classify sequences of events is probably more popular in industrial applications where there is an inherent need to model nonlinear system

  7. Systemic darwinism.

    Science.gov (United States)

    Winther, Rasmus Grønfeldt

    2008-08-19

    Darwin's 19th century evolutionary theory of descent with modification through natural selection opened up a multidimensional and integrative conceptual space for biology. We explore three dimensions of this space: explanatory pattern, levels of selection, and degree of difference among units of the same type. Each dimension is defined by a respective pair of poles: law and narrative explanation, organismic and hierarchical selection, and variational and essentialist thinking. As a consequence of conceptual debates in the 20th century biological sciences, the poles of each pair came to be seen as mutually exclusive opposites. A significant amount of 21st century research focuses on systems (e.g., genomic, cellular, organismic, and ecological/global). Systemic Darwinism is emerging in this context. It follows a "compositional paradigm" according to which complex systems and their hierarchical networks of parts are the focus of biological investigation. Through the investigation of systems, Systemic Darwinism promises to reintegrate each dimension of Darwin's original logical space. Moreover, this ideally and potentially unified theory of biological ontology coordinates and integrates a plurality of mathematical biological theories (e.g., self-organization/structure, cladistics/history, and evolutionary genetics/function). Integrative Systemic Darwinism requires communal articulation from a plurality of perspectives. Although it is more general than these, it draws on previous advances in Systems Theory, Systems Biology, and Hierarchy Theory. Systemic Darwinism would greatly further bioengineering research and would provide a significantly deeper and more critical understanding of biological reality.

  8. Immune System

    NARCIS (Netherlands)

    Kuper, C.F.; Ruehl-Fehlert, C.; Elmore, S.A.; Parker, G.A.

    2013-01-01

    Cells of the immune system are found in every organ, from the classic lymphoid organs to tissues such as liver, mucosae, and omental adipose tissue. Toxicity to the immune system may be from a direct or indirect injury to lymphoid organs. The morphological responses range from lymphocyte depletion t

  9. Linear Systems.

    Science.gov (United States)

    The report documents a series of seminars at Rome Air Development Center with the content equivalent to an intense course in Linear Systems . Material...is slanted toward the practicing engineer and introduces some of the fundamental concepts and techniques for analyzing linear systems . Techniques for

  10. Caste System

    OpenAIRE

    Hoff, Karla

    2016-01-01

    In standard economics, individuals are rational actors and economic forces undermine institutions that impose large inefficiencies. The persistence of the caste system is evidence of the need for psychologically more realistic models of decision-making in economics. The caste system divides South Asian society into hereditary groups whose lowest ranks are represented as innately polluted. ...

  11. cardiovascular system

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    6.1 Cardiac arrhythmias 2006037 Electroanatomical systems guided circumferential pulmonary veins ablation for atrial fibrillation: initial experience from comparison between the EnSite -NavX and CARTO system LIU Xu(刘旭 ), et al. Dept Cardiol, Shanghai Chest Hosp, Shanghai, 200030, China. Chin J Cardiol 2005; 33 (22): 975 -978.

  12. Power system

    Science.gov (United States)

    Hickam, Christopher Dale

    2008-03-18

    A power system includes a prime mover, a transmission, and a fluid coupler having a selectively engageable lockup clutch. The fluid coupler may be drivingly connected between the prime mover and the transmission. Additionally, the power system may include a motor/generator drivingly connected to at least one of the prime mover and the transmission. The power-system may also include power-system controls configured to execute a control method. The control method may include selecting one of a plurality of modes of operation of the power system. Additionally, the control method may include controlling the operating state of the lockup clutch dependent upon the mode of operation selected. The control method may also include controlling the operating state of the motor/generator dependent upon the mode of operation selected.

  13. Reactive Systems

    DEFF Research Database (Denmark)

    Aceto, Luca; Ingolfsdottir, Anna; Larsen, Kim Guldstrand

    A reactive system comprises networks of computing components, achieving their goals through interaction among themselves and their environment. Thus even relatively small systems may exhibit unexpectedly complex behaviours. As moreover reactive systems are often used in safety critical systems......, the need for mathematically based formal methodology is increasingly important. There are many books that look at particular methodologies for such systems. This book offers a more balanced introduction for graduate students and describes the various approaches, their strengths and weaknesses, and when...... they are best used. Milner's CCS and its operational semantics are introduced, together with the notions of behavioural equivalences based on bisimulation techniques and with recursive extensions of Hennessy-Milner logic. In the second part of the book, the presented theories are extended to take timing issues...

  14. Phospholipidic signaling and vanillin production in response to salicylic acid and methyl jasmonate in Capsicum chinense J. cells.

    Science.gov (United States)

    Altúzar-Molina, Alma R; Muñoz-Sánchez, J Armando; Vázquez-Flota, Felipe; Monforte-González, Miriam; Racagni-Di Palma, Graciela; Hernández-Sotomayor, S M Teresa

    2011-02-01

    The phospholipidic signal transduction system involves generation of second messengers by hydrolysis or changes in phosphorylation state. Several studies have shown that the signaling pathway forms part of plant response to phytoregulators such as salicylic acid (SA) and methyl jasmonate (MJ), which have been widely used to stimulate secondary metabolite production in cell cultures. An evaluation was made of the effect of SA and MJ on phospholipidic signaling and capsaicinoid production in Capsicum chinense Jacq. suspension cells. Treatment with SA inhibited phospholipase C (PLC) (EC: 3.1.4.3) and phospholipase D (PLD) (EC: 3.1.4.4) activities in vitro, but increased lipid kinase activities in vitro at different SA concentrations. Treatment with MJ produced increases in PLC and PLD activities, while lipid kinase activities were variable and dose-dependent. The production of vanillin, a precursor of capsaicinoids, increased at specific SA or MJ doses. Preincubation with neomycin, a phospholipase inhibitor, before SA or MJ treatment inhibits increase in vanillin production which suggests that phospholipidic second messengers may participate in the observed increase in vanillin production.

  15. Physical Systems

    CERN Document Server

    Belkind, Ori

    2012-01-01

    Based on the concept of a physical system, this book offers a new philosophical interpretation of classical mechanics and the Special Theory of Relativity. According to Belkind's view the role of physical theory is to describe the motions of the parts of a physical system in relation to the motions of the whole. This approach provides a new perspective into the foundations of physical theory, where motions of parts and wholes of physical systems are taken to be fundamental, prior to spacetime, material properties and laws of motion. He defends this claim with a constructive project, deriving b

  16. Dynamical systems

    CERN Document Server

    Sternberg, Shlomo

    2010-01-01

    Celebrated mathematician Shlomo Sternberg, a pioneer in the field of dynamical systems, created this modern one-semester introduction to the subject for his classes at Harvard University. Its wide-ranging treatment covers one-dimensional dynamics, differential equations, random walks, iterated function systems, symbolic dynamics, and Markov chains. Supplementary materials offer a variety of online components, including PowerPoint lecture slides for professors and MATLAB exercises.""Even though there are many dynamical systems books on the market, this book is bound to become a classic. The the

  17. Avionics Systems

    Directory of Open Access Journals (Sweden)

    P.M. Soundar Rajan

    2013-03-01

    Full Text Available ‘Avionics’ systems, over the decades, have grown from simple communication radios and navigation equipments to complex integrated equipments primarily infiuenced by dominance of digital technology. Continuous growth in integrated circuit technology, functional integration of complete system on chip, very high speed communication channels and fault tolerant communication protocols have brought remarkable advancements in avionics systems. Further Mechanical and Pneumatic functional blocks are being replaced by digital systems progressively and decisively. New generation aircraft are being built around powerful avionics assets to provide stress free cockpit to the pilot.Defence Science Journal, 2013, 63(2, pp.129-130, DOI:http://dx.doi.org/10.14429/dsj.63.4269

  18. Bubble systems

    CERN Document Server

    Avdeev, Alexander A

    2016-01-01

    This monograph presents a systematic analysis of bubble system mathematics, using the mechanics of two-phase systems in non-equilibrium as the scope of analysis. The author introduces the thermodynamic foundations of bubble systems, ranging from the fundamental starting points to current research challenges. This book addresses a range of topics, including description methods of multi-phase systems, boundary and initial conditions as well as coupling requirements at the phase boundary. Moreover, it presents a detailed study of the basic problems of bubble dynamics in a liquid mass: growth (dynamically and thermally controlled), collapse, bubble pulsations, bubble rise and breakup. Special emphasis is placed on bubble dynamics in turbulent flows. The analysis results are used to write integral equations governing the rate of vapor generation (condensation) in non-equilibrium flows, thus creating a basis for solving a number of practical problems. This book is the first to present a comprehensive theory of boil...

  19. AEG System -

    Data.gov (United States)

    Department of Transportation — The AEG System is used to create, revise, approve, and distribute text of the AEGS and Flight Standard Board (FSB)/Type Rating Report. The MMEL specifies under what...

  20. Recommender Systems

    CERN Document Server

    Lü, Linyuan; Yeung, Chi Ho; Zhang, Yi-Cheng; Zhang, Zi-Ke; Zhou, Tao

    2012-01-01

    The ongoing rapid expansion of the Internet greatly increases the necessity of effective recommender systems for filtering the abundant information. Extensive research for recommender systems is conducted by a broad range of communities including social and computer scientists, physicists, and interdisciplinary researchers. Despite substantial theoretical and practical achievements, unification and comparison of different approaches are lacking, which impedes further advances. In this article, we review recent developments in recommender systems and discuss the major challenges. We compare and evaluate available algorithms and examine their roles in the future developments. In addition to algorithms, physical aspects are described to illustrate macroscopic behavior of recommender systems. Potential impacts and future directions are discussed. We emphasize that recommendation has a great scientific depth and combines diverse research fields which makes it of interests for physicists as well as interdisciplinar...

  1. Systems failure.

    OpenAIRE

    Macleod, Anna

    1998-01-01

    Systems Failure A solo exhibition of new work by Anna Macleod developed in conversation with curator Liz Burns. The Dock, Carrick on Shannon, Co Leitrim. Ireland. 12th February – 17th April 2010. The works for the exhibition Systems Failure include drawings, prints and small constructions that examine the delicate balance that exists between need and aspects of failure rooted in the relationship between humanity and land use. The work seeks to question the relationship between scient...

  2. Nanorobotic Systems

    Directory of Open Access Journals (Sweden)

    Lixin Dong

    2008-11-01

    Full Text Available Two strategies towards the realization of nanotechnology have been presented, i.e., top-down and bottom up. The former one is mainly based on nanofabrication and includes technologies such as nano-lithography, nano-imprint, and etching. Presently, they are still 2D fabrication processes with low resolution. The later one is an assembly-based technique. At present, it includes such items as self-assembly, dip-pen lithography, and directed self-assembly. These techniques can generate regular nano patterns in large scales. To fabricate 3D complex nano devices there are still no effective ways by so far. Here we show our effort on the development of a nano laboratory, a prototype nanomanufacturing system, based on nanorobotic manipulations. In which, we take a hybrid strategy as shown in Fig. 1. In this system, nano fabrication and nano assembly can be performed in an arbitrary order to construct nano building blocks and finally nano devices. The most important feature in this system is that the products can be fed back into the system to shrink the system part by part leading to nanorobots. Property characterization can be performed in each intermediate process. Due to the nanorobotic manipulation system, dynamic measurement can be performed rather than conventional static observations.

  3. System-of-Systems Complexity

    Directory of Open Access Journals (Sweden)

    Hermann Kopetz

    2013-11-01

    Full Text Available The global availability of communication services makes it possible to interconnect independently developed systems, called constituent systems, to provide new synergistic services and more efficient economic processes. The characteristics of these new Systems-of-Systems are qualitatively different from the classic monolithic systems. In the first part of this presentation we elaborate on these differences, particularly with respect to the autonomy of the constituent systems, to dependability, continuous evolution, and emergence. In the second part we look at a SoS from the point of view of cognitive complexity. Cognitive complexity is seen as a relation between a model of an SoS and the observer. In order to understand the behavior of a large SoS we have to generate models of adequate simplicity, i.e, of a cognitive complexity that can be handled by the limited capabilities of the human mind. We will discuss the importance of properly specifying and placing the relied-upon message interfaces between the constituent systems that form an open SoS and discuss simplification strategies that help to reduce the cognitive complexity.

  4. Systems Studies

    Energy Technology Data Exchange (ETDEWEB)

    Graham, R.L.

    1998-03-17

    The Systems Studies Activity had two objectives: (1) to investigate nontechnical barriers to the deployment of biomass production and supply systems and (2) to enhance and extend existing systems models of bioenergy supply and use. For the first objective, the Activity focused on existing bioenergy markets. Four projects were undertaken: a comparative analysis of bioenergy in Sweden and Austria; a one-day workshop on nontechnical barriers jointly supported by the Production Systems Activity; the development and testing of a framework for analyzing barriers and drivers to bioenergy markets; and surveys of wood pellet users in Sweden, Austria and the US. For the second objective, two projects were undertaken. First, the Activity worked with the Integrated BioEnergy Systems (TBS) Activity of TEA Bioenergy Task XIII to enhance the BioEnergy Assessment Model (BEAM). This model is documented in the final report of the IBS Activity. The Systems Studies Activity contributed to enhancing the feedstock portion of the model by developing a coherent set of willow, poplar, and switchgrass production modules relevant to both the US and the UK. The Activity also developed a pretreatment module for switchgrass. Second, the Activity sponsored a three-day workshop on modeling bioenergy systems with the objectives of providing an overview of the types of models used to evaluate bioenergy and promoting communication among bioenergy modelers. There were nine guest speakers addressing different types of models used to evaluate different aspects of bioenergy, ranging from technoeconomic models based on the ASPEN software to linear programming models to develop feedstock supply curves for the US. The papers from this workshop have been submitted to Biomass and Bioenergy and are under editorial review.

  5. 辣椒的辣味遗传控制与辣椒素生物合成研究进展%Progress on Genetic Control of Pungency and Capsaicinoid Biosynthesis in Capsicum spp.

    Institute of Scientific and Technical Information of China (English)

    张正海; 毛胜利; 王立浩; 张宝玺

    2014-01-01

    辣椒的辣味源于其果实胎座中合成的辣椒素和二氢辣椒素等生物碱类物质.就辣椒辣味的遗传特征,影响因素,辣椒素类物质生物合成途径及相关基因进化,辣味性状QTL定位,Pun1和pAMT基因分子标记辅助选择进行了综述.

  6. Determination of Capsaicinoid Content by HPLC and Calculation of Pungency Degree in Capsicum%高效液相色谱法测定辣椒素及辣度计算

    Institute of Scientific and Technical Information of China (English)

    王燕; 夏延斌; 夏菠; 罗凤莲; 张喻

    2006-01-01

    本文研究了用超声波法提取,再采用高效液相色谱法测定辣椒素的方法.通过正交试验确定最佳提取条件为:提取温度60℃,提取时间50 min,提取功率100%.高效液相色谱分析辣椒素的条件为:色谱柱为Agilent Zorbax SB-C18(5μm,250mm×4.6mm),柱温30.0℃.UV检测器的波长:280nm.流动相V(甲醇):V(水)=80:20,流速0.8mL/min,进样量10μL.本方法测定辣椒素分离度好,快速、准确.

  7. Determination of Capsaicinoids and Classification of Pungency Level in Sichuan Cuisine Dishes%川菜菜品的辣味物质分析与辣度分级

    Institute of Scientific and Technical Information of China (English)

    贾洪锋; 邓红; 梁爱华; 王鑫; 林丹; 严利强; 易宇文; 王良云

    2015-01-01

    采用高效液相色谱法测定部分川菜菜品中辣味物质(辣椒素及二氢辣椒素)的含量,根据高效液相色谱分析结果结合感官评价进行辣味分级.根据辣度的强弱分为5级(特辣,辣椒素类物质含量≥0.291 8 g/kg)、4级(辣,辣椒素类物质含量0.092 4~0.291 8 g/kg)、3级(中辣,辣椒素类物质含量0.019 5~0.092 4 g/kg)、2级(微辣,辣椒素类物质含量0.001 95~0.019 5 g/kg)、1级(不辣,辣椒素类物质含量<0.001 95 g/kg)5个等级.在123个样品中,1级样品占39.84%,2级样品占18.70%,3级样品占26.83%,4级样品占12.20%,5级样品占2.44%.实验还分析了辣椒及其制品对样品辣味的影响,样品的辣味不仅与辣椒及其制品的种类和使用量有关,还与加工方式、原料大小、加工温度、调味料等密切相关.

  8. Systemic trauma.

    Science.gov (United States)

    Goldsmith, Rachel E; Martin, Christina Gamache; Smith, Carly Parnitzke

    2014-01-01

    Substantial theoretical, empirical, and clinical work examines trauma as it relates to individual victims and perpetrators. As trauma professionals, it is necessary to acknowledge facets of institutions, cultures, and communities that contribute to trauma and subsequent outcomes. Systemic trauma-contextual features of environments and institutions that give rise to trauma, maintain it, and impact posttraumatic responses-provides a framework for considering the full range of traumatic phenomena. The current issue of the Journal of Trauma & Dissociation is composed of articles that incorporate systemic approaches to trauma. This perspective extends conceptualizations of trauma to consider the influence of environments such as schools and universities, churches and other religious institutions, the military, workplace settings, hospitals, jails, and prisons; agencies and systems such as police, foster care, immigration, federal assistance, disaster management, and the media; conflicts involving war, torture, terrorism, and refugees; dynamics of racism, sexism, discrimination, bullying, and homophobia; and issues pertaining to conceptualizations, measurement, methodology, teaching, and intervention. Although it may be challenging to expand psychological and psychiatric paradigms of trauma, a systemic trauma perspective is necessary on both scientific and ethical grounds. Furthermore, a systemic trauma perspective reflects current approaches in the fields of global health, nursing, social work, and human rights. Empirical investigations and intervention science informed by this paradigm have the potential to advance scientific inquiry, lower the incidence of a broader range of traumatic experiences, and help to alleviate personal and societal suffering.

  9. Turbine system

    Energy Technology Data Exchange (ETDEWEB)

    McMahan, Kevin Weston; Dillard, Daniel Jackson

    2016-05-03

    A turbine system is disclosed. The turbine system includes a transition duct having an inlet, an outlet, and a passage extending between the inlet and the outlet and defining a longitudinal axis, a radial axis, and a tangential axis. The outlet of the transition duct is offset from the inlet along the longitudinal axis and the tangential axis. The turbine system further includes a turbine section connected to the transition duct. The turbine section includes a plurality of shroud blocks at least partially defining a hot gas path, a plurality of buckets at least partially disposed in the hot gas path, and a plurality of nozzles at least partially disposed in the hot gas path. At least one of a shroud block, a bucket, or a nozzle includes means for withstanding high temperatures.

  10. Cognitive Systems

    DEFF Research Database (Denmark)

    user models and user interaction models. Research in cognitive information processing is inherently multi-disciplinary and involves natural science and technical disciplines, e.g., control, automation, and robot research, physics and computer science, as well as humanities such as social sciences......The tutorial will discuss the definition of cognitive systems as the possibilities to extend the current systems engineering paradigm in order to perceive, learn, reason and interact robustly in open-ended changing environments. I will also address cognitive systems in a historical perspective...... and its relation and potential over current artificial intelligence architectures. Machine learning models that learn from data and previous knowledge will play an increasingly important role in all levels of cognition as large real world digital environments (such as the Internet) usually are too complex...

  11. Microbiology System

    Science.gov (United States)

    1992-01-01

    Technology originating in a NASA-sponsored study of the measurement of microbial growth in zero gravity led to the development of Biomerieux Vitek, Inc.'s VITEK system. VITEK provides a physician with accurate diagnostic information and identifies the most effective medication. Test cards are employed to identify organisms and determine susceptibility to antibiotics. A photo-optical scanner scans the card and monitors changes in the growth of cells contained within the card. There are two configurations - VITEK and VITEK JR as well as VIDAS, a companion system that detects bacteria, viruses, etc. from patient specimens. The company was originally created by McDonnell Douglas, the NASA contractor.

  12. Lubrication system

    Energy Technology Data Exchange (ETDEWEB)

    Wadding, C.; Lagasse, N.L.; Milo, G.T.; Vankamerik, J.G.

    1986-02-11

    This patent describes a lubrication system for controlling the flow of lubricant as a function of the altitude at which a gas turbine engine is operating. This lubrication system is comprised of: 1.) A source of lubricant under pressure; 2.) A unit requiring lubrication; 3.) A movable valve in fluid communication with the source and with the unit for regulating the flow of lubricant from the source to the unit; and 4.) An altitude sensor associated with the movable valve for positioning the movable valve to control the flow of lubricant from the source to the unit, as a function of the altitude at which the engine is operating.

  13. System Description:

    DEFF Research Database (Denmark)

    Schürmann, Carsten; Poswolsky, Adam

    2009-01-01

    Delphin is a functional programming language [Adam Poswolsky and Carsten Schürmann. Practical programming with higher-order encodings and dependent types. In European Symposium on Programming (ESOP), 2008] utilizing dependent higher-order datatypes. Delphin's two-level type-system cleanly separates...... data from computation, allowing for decidable type checking. The data level is LF [Robert Harper, Furio Honsell, and Gordon Plotkin. A framework for defining logics. Journal of the Association for Computing Machinery, 40(1):143-184, January 1993], which allows for the specification of deductive systems...

  14. [Systemic scleroderma].

    Science.gov (United States)

    Hunzelmann, N

    2013-04-01

    Systemic scleroderma is a chronic autoimmune disease affecting the skin, internal organs and the musculoskeletal system. The presence of Raynaud phenomenon, anti-nuclear antibodies and pathologic capillaroscopy are early signs of the disease. Limited cutaneous SSc, diffuse cutaneous SSc and SSc-overlap syndromes are the main clinical subtypes. Multidisciplinary care is mandatory. Follow-up examinations should be performed at least annually in order to recognize in a timely fashion treatable organ involvement such as pulmonary arterial hypertension. Besides symptomatic treatment of organ involvement, immunosuppressive therapy is indicated for a progressive inflammatory course.

  15. Computer systems

    Science.gov (United States)

    Olsen, Lola

    1992-01-01

    In addition to the discussions, Ocean Climate Data Workshop hosts gave participants an opportunity to hear about, see, and test for themselves some of the latest computer tools now available for those studying climate change and the oceans. Six speakers described computer systems and their functions. The introductory talks were followed by demonstrations to small groups of participants and some opportunities for participants to get hands-on experience. After this familiarization period, attendees were invited to return during the course of the Workshop and have one-on-one discussions and further hands-on experience with these systems. Brief summaries or abstracts of introductory presentations are addressed.

  16. Systems chemistry

    NARCIS (Netherlands)

    Ludlow, R. Frederick; Otto, Sijbren

    2008-01-01

    The study of complex mixtures of interacting synthetic molecules has historically not received much attention from chemists, even though research into complexity is well established in the neighbouring fields. However, with the huge recent interest in systems biology and the availability of modern a

  17. Solar system

    CERN Document Server

    Homer, Charlene

    2007-01-01

    Thrill young astronomers with a journey through our Solar System. Find out all about the Inner and Outer Planets, the Moon, Stars, Constellations, Asteroids, Meteors and Comets. Using simplified language and vocabulary, concepts such as planetary orbits, the asteroid belt, the lunar cycle and phases of the moon, and shooting stars are all explored.

  18. Transport system

    NARCIS (Netherlands)

    Drenth, K.F.

    1999-01-01

    The transport system comprises at least one road surface (2) and at least one vehicle (4) on wheels (6). The road surface (2) has a substantially bowl-shaped cross section and the vehicle (4) is designed so that the wheels (6) run directly on the road surface (2) while the road surface (2) acts as a

  19. Immune System

    Science.gov (United States)

    ... and mature there to become B cells or leave for the thymus gland, where they mature to become T cells. B lymphocytes and T lymphocytes have separate jobs to do: B lymphocytes are like the body's military intelligence system, seeking out their targets and sending defenses to ...

  20. System Dynamics

    Science.gov (United States)

    Morecroft, John

    System dynamics is an approach for thinking about and simulating situations and organisations of all kinds and sizes by visualising how the elements fit together, interact and change over time. This chapter, written by John Morecroft, describes modern system dynamics which retains the fundamentals developed in the 1950s by Jay W. Forrester of the MIT Sloan School of Management. It looks at feedback loops and time delays that affect system behaviour in a non-linear way, and illustrates how dynamic behaviour depends upon feedback loop structures. It also recognises improvements as part of the ongoing process of managing a situation in order to achieve goals. Significantly it recognises the importance of context, and practitioner skills. Feedback systems thinking views problems and solutions as being intertwined. The main concepts and tools: feedback structure and behaviour, causal loop diagrams, dynamics, are practically illustrated in a wide variety of contexts from a hot water shower through to a symphony orchestra and the practical application of the approach is described through several real examples of its use for strategic planning and evaluation.

  1. Irrigation System

    Science.gov (United States)

    1984-01-01

    Under contract with Marshall Space Flight Center, Midwest Research Institute compiled a Lubrication Handbook intended as a reference source for designers and manufacturers of aerospace hardware and crews responsible for maintenance of such equipment. Engineers of Lindsay Manufacturing Company learned of this handbook through NASA Tech Briefs and used it for supplemental information in redesigning gear boxes for their center pivot agricultural irrigation system.

  2. Immune System

    Science.gov (United States)

    A properly functioning immune system is essential to good health. It defends the body against infectious agents and in some cases tumor cells. Individuals with immune deficiencies resulting from genetic defects, diseases (e.g., AIDS, leukemia), or drug therapies are more suscepti...

  3. [Systemic sclerosis].

    Science.gov (United States)

    Schinke, Susanne; Riemekasten, Gabriela

    2016-04-01

    Systemic sclerosis is a challenging and heterogeneous disease due to the involvement of multiple organs and the high impact on morbidity and quality of life. Lung fibrosis, pulmonary arterial hypertension, and cardiac manifestations are main causes of systemic sclerosis-related deaths. In addition, patients suffer from a various range of co-morbidities such as malnutrition, depression, osteoporosis, malignancies, which are increased in these patients and have to be identified and treated. Early assessment of organ damage is a key to therapeutic success. The discovery of pathogenic autoantibodies combined with increased evidence of effective immunosuppressive and vasoactive treatment strategies are major developments in the therapy of the disease. At present, several clinical studies are ongoing and some of the biological therapies are promising.

  4. Blackboard Systems.

    Science.gov (United States)

    1986-06-01

    article stated that although the importance of context, syntax, semantics, and phonological rules in the recognition of speech was accepted, no system had...of, from the lowest to the highest level: parametric, segmental, phonetic , phonemic, syllabic, lexical, phrasal, and conceptual levels (see Figure 3...from classification (classifying acoustic segments into phonetic classes), to recognition (recognizing words) to generation and 42SCe (25] for a

  5. Security system

    Science.gov (United States)

    Baumann, Mark J.; Kuca, Michal; Aragon, Mona L.

    2016-02-02

    A security system includes a structure having a structural surface. The structure is sized to contain an asset therein and configured to provide a forceful breaching delay. The structure has an opening formed therein to permit predetermined access to the asset contained within the structure. The structure includes intrusion detection features within or associated with the structure that are activated in response to at least a partial breach of the structure.

  6. Imaging System

    Science.gov (United States)

    1995-01-01

    The 1100C Virtual Window is based on technology developed under NASA Small Business Innovation (SBIR) contracts to Ames Research Center. For example, under one contract Dimension Technologies, Inc. developed a large autostereoscopic display for scientific visualization applications. The Virtual Window employs an innovative illumination system to deliver the depth and color of true 3D imaging. Its applications include surgery and Magnetic Resonance Imaging scans, viewing for teleoperated robots, training, and in aviation cockpit displays.

  7. Propulsion Systems

    Science.gov (United States)

    2011-03-31

    definition we are choosing x to be aligned with the direction of flight. Thus, accounting for the possible rotation of the axes, the acceleration in...Monopropellants. In a monopropellant system, like the name suggests, there is one propellant which decomposes exothermically as it passes through a catalytic...it comes into contact with the catalyst bed. Subsequently, the ammonia decomposes into nitrogen and hydrogen in an endothermic reaction lowering the

  8. Natural Capsaicin in Capsicum chinense: Concentration vs. Origin

    Science.gov (United States)

    Capsaicin [N-vanillyl-8-methyl-6-(E) noneamide] is the most pungent of the group of compounds known as capsaicinoids in chili peppers. A survey was conducted to screen fruits of 307 hot pepper accessions of Capsicum chinense selected from the USDA germplasm collection for their major capsaicinoids c...

  9. Law system and legislation system

    OpenAIRE

    Boshno, Svetlana

    2013-01-01

    This paper is a continuation of publication of the «Jurisprudence» textbook by Svetlana Vladimirovna Boshno. Law system is a key element of general theory of law. The major fundamentals of its construction are subject matter and method of legal regulation. Of great importance is the division of legal regulation methods into mandative and dispositive ones. The paper articulates the concepts of institute and branch of law demonstrated through various examples. An important classification of bra...

  10. Linear systems

    CERN Document Server

    Bourlès, Henri

    2013-01-01

    Linear systems have all the necessary elements (modeling, identification, analysis and control), from an educational point of view, to help us understand the discipline of automation and apply it efficiently. This book is progressive and organized in such a way that different levels of readership are possible. It is addressed both to beginners and those with a good understanding of automation wishing to enhance their knowledge on the subject. The theory is rigorously developed and illustrated by numerous examples which can be reproduced with the help of appropriate computation software. 60 exe

  11. Nuclear systems

    CERN Document Server

    Todreas, Neil E

    2011-01-01

    Principal Characteristics of Power ReactorsIntroductionPower CyclesPrimary Coolant SystemsReactor CoresFuel AssembliesAdvanced Water- and Gas-Cooled Reactors (Generation III And III+)Advanced Thermal and Fast Neutron Spectrum Reactors (Generation IV)ReferencesProblemsThermal Design Principles and ApplicationIntroductionOverall Plant Characteristics Influenced by Thermal Hydraulic ConsiderationsEnergy Production and Transfer ParametersThermal Design LimitsThermal Design MarginFigures of Merit for Core Thermal PerformanceThe Inverted Fuel ArrayThe Equivalent Annulus ApproximationReferencesProble

  12. Expert Systems: What Is an Expert System?

    Science.gov (United States)

    Duval, Beverly K.; Main, Linda

    1994-01-01

    Describes expert systems and discusses their use in libraries. Highlights include parts of an expert system; expert system shells; an example of how to build an expert system; a bibliography of 34 sources of information on expert systems in libraries; and a list of 10 expert system shells used in libraries. (Contains five references.) (LRW)

  13. Systemic Planning

    DEFF Research Database (Denmark)

    Leleur, Steen

    This book presents principles and methodology for planning in a complex world. It sets out a so-called systemic approach to planning, among other things, by applying “hard” and “soft” methodologies and methods in combination. The book is written for Ph.D and graduate students in engineering......, business and other fields, and it is useful for all professionals, across a wide range of employment areas, who share an interest in renewing planning practice. Such an endeavour is seen as both important and timely, recognising that many complex planning tasks necessitate organisations – be they public...... or private – to engage in planning to prepare proactive decision-making....

  14. Model Systems

    Directory of Open Access Journals (Sweden)

    Francisco Rodríguez-Trelles

    1998-12-01

    Full Text Available Current efforts to study the biological effects of global change have focused on ecological responses, particularly shifts in species ranges. Mostly ignored are microevolutionary changes. Genetic changes may be at least as important as ecological ones in determining species' responses. In addition, such changes may be a sensitive indicator of global changes that will provide different information than that provided by range shifts. We discuss potential candidate systems to use in such monitoring programs. Studies of Drosophila subobscura suggest that its chromosomal inversion polymorphisms are responding to global warming. Drosophila inversion polymorphisms can be useful indicators of the effects of climate change on populations and ecosystems. Other species also hold the potential to become important indicators of global change. Such studies might significantly influence ecosystem conservation policies and research priorities.

  15. Turbocompound system

    Energy Technology Data Exchange (ETDEWEB)

    Fox, L.D.

    1986-05-06

    A turbocompound system is described for improving the performance of an internal combustion engine without substantially increasing an end viewed profile of the engine to which it is mounted in use. The system consists of: (a) an exhaust driven turbocharger means having an exhaust manifold means extending in an axial direction for collecting exhaust gases from engine cylinders and delivering the gases to an outlet end thereof, exhaust turbine means for extracting energy from the exhaust gases, the exhaust turbine means being provided with an inlet connected to the outlet end of the manifold and an outlet for discharging the exhaust gases, compressor means coupled to the exhaust turbine means for providing a supply of charge air under pressure to an air outlet thereof for delivery to air intake means of an internal combustion engine in use; (b) a power turbine means for extracting additional energy from the exhaust gases, the power turbine means having an intake connected to the outlet of the exhaust turbine means, and mounting means on a side of the power turbine means facing in a direction parallel to the axial direction of the exhaust manifold means that is constructed for being mounted, in use, on an end of an engine adjacent one end of a crankshaft of the engine; and (c) coupling means connected to the power turbine means for transferring mechanical energy produced by the power turbine means, the coupling means extending from the power turbine means to a power take-off end in a direction parallel to the axial length of the exhaust manifold means by an amount that is sufficient for enabling the power take-off end to be connected, in use, to an opposite end of the engine crankshaft from the one end thereof in a manner for transferring the mechanical energy produced by the power turbine means adjacent the one end of the crankshaft to the opposite end of the crankshaft without having to pass therethrough.

  16. Systems engineering simplified

    CERN Document Server

    Cloutier, Robert; Bone, Mary Alice

    2015-01-01

    IntroductionOverviewDiscussion of Common TerminologyThe Case for Systems EngineeringA Brief History of Systems EngineeringSystem ExamplesSummaryThe System Life CycleManaging System Development-The Vee ModelSystem ProductionSystem Utilization and SupportSystem Retirement and DisposalOther Systems Engineering Development ModelsSpiral ModelAgile Model for Systems EngineeringSystem of InterestAbstraction and DecompositionIntegrationDeveloping and Managing RequirementsCyclone Requiremen

  17. Cardiovascular System

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    7.1 Heart failure2007175 Effects of recombinant human brain natriuretic peptide on aldosterone and endothelin-1 in treatment of heart failure. FU Yao(付尧),et al. Dept Cardiol, 1st Affili Hosp, China Med Univ, Shenyang 110001. Chin Cir J 2007;22(1):35-37. Obiective To study the efficacy and the effects of recombinant human brain natriuretic peptide(rhBNP) on aldosterone and endothelin-1 in the treatment of congestive heart failure(CHF).Methods A randomized, open, controlled clinical trial was conducted in 35 patients with CHF. Eighteen received rhBNP and 17 were treated with nitroglycerin as controls. The changes hemodynamic indexes, the plasma concentrations of K+, Na+, aldo-sterone(ALD) and endothelin-1 (ET-1) in order to examine the efficacy and mechanism of rhBNP. Results Between experiment and control groups significant differences were found in the decreasing of PCWP, PAP and plasma concentration of Na+, ALD, ET-1, and in the increasing of plasma concentration of K+ (P<0.05~0.01). Conclusion The mechanism of rhBNP may be associated with the overactivation of renin-angiotension-aldosterone system, and the inhibited production of endothelin-1.

  18. System safety education focused on system management

    Science.gov (United States)

    Grose, V. L.

    1971-01-01

    System safety is defined and characteristics of the system are outlined. Some of the principle characteristics include role of humans in hazard analysis, clear language for input and output, system interdependence, self containment, and parallel analysis of elements.

  19. Respiratory System

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    8.1 Respiratory failure2007204 Comparison of the effects of BiPAP ventilation combined with lung recruitment maneuvers and low tidal volume A/C ventilation in patients with acute respiratory distress syndrome. WANG Xiaozhi(王晓芝),et al. Dept Respir & Intensive Care Unit, Binzhou Med Coll, Binzhou 256603. Chin J Tuberc Respir Dis 2007;30(1):44-47. Objective To compare the effects of BiPAP ventilation combined with lung recruitment maneuvers(LRM) with low tidal volume A/C ventilation in patients with acute respiratory distress syndrome (ARDS). Methods A prospective, randomized comparison of BiPAP mechanical ventilation combined with lung recruitment maneuvers(test group) with low tidal volume A/C ventilation (control group) was conducted in 28 patients with ARDS. FiO2/PaO2 ratio, respiratory system compliance(Cs), central venous pressure (CVP), duration of ventilation support were recorded at 0 h, 48 h and 72 h separately. The ventilation associated lung injury and mortality at 28 d were also recorded. Results The FiO2/PaO2 ratio were (298±16) and (309±16) cm H2O, Cs were (38.4±2.2) and (42.0±1.3) ml/cm H2O, CVP were (13.8±0.8) and (11.6±0.7) cm H2O in the test group at 48 h and 72 h separately. In the control group, FiO2/PaO2 ratio were (212±12) and (246±17) cm H2O, Cs were (29.5±1.3) and (29.0±1.0) ml/cm H2O, CVP were 18.6±1.1 and (16.8±1.0) cm H2O. The results were better in the test group as compared with the control group (t=10.03-29. 68, all P<0.01). The duration of ventilation support in the test group was shorter than the control group [(14±3) d vs (19±3)d, t=4.80, P<0.01]. The mortality in 28 d and ventilation associated lung injury were similar in the two groups. Conclusion The results show that combination of LRM with BiPAP mode ventilation, as compared with the control group, contributes to the improved FiO2/PaO2 ratio, pulmonary compliance, stable homodynamic and shorter duration of ventilation support in patients with ARDs.

  20. Quality management system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Mu Sung

    2009-08-15

    This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

  1. Square conservation systems and Hamiltonian systems

    Institute of Scientific and Technical Information of China (English)

    王斌; 曾庆存; 季仲贞

    1995-01-01

    The internal and external relationships between the square conservation scheme and the symplectic scheme are revealed by a careful study on the interrelation between the square conservation system and the Hamiltonian system in the linear situation, thus laying a theoretical basis for the application and extension of symplectic schemes to square conservations systems, and of those schemes with quadratic conservation properties to Hamiltonian systems.

  2. Systems theory of interconnected port contact systems

    NARCIS (Netherlands)

    Eberard, D.; Maschke, B.M.; Schaft, A.J. van der

    2005-01-01

    Port-based network modeling of a large class of complex physical systems leads to dynamical systems known as port-Hamiltonian systems. The key ingredient of any port-Hamiltonian system is a power-conserving interconnection structure (mathematically formalized by the geometric notion of a Dirac struc

  3. Protecting Information in Systems of Systems

    NARCIS (Netherlands)

    Trivellato, Daniel; Zannone, Nicola; Etalle, Sandro

    2011-01-01

    Systems of Systems (SoS) are dynamic, distributed coalitions of autonomous and heterogeneous systems that collaborate to achieve a common goal. While offering several advantages in terms of scalability and flexibility, the SoS paradigm has a strong impact on system interoperability and on the securi

  4. Understanding Patterns for System of Systems Integration

    DEFF Research Database (Denmark)

    Kazman, Rick; Schmid, Klaus; Nielsen, Claus Ballegård

    2013-01-01

    of systems integration patterns. These characteristics at the same time support the architecting process by highlighting important issues a SoS architect needs to consider. We discuss the consolidated template and illustrate it with an example pattern. We also discuss the integration of this novel pattern......Architecting systems of systems is well known to be a formidable challenge. A major aspect in this is defining the integration among the systems that constitute the system of systems. In this paper, we aim to support the SoS architect by systematically developing a way to characterize system...

  5. Concept and System of Personification Control System

    Institute of Scientific and Technical Information of China (English)

    Bai,Fengshuang; Yin,Yixin; Tu,Xuyan; Zhang,Ying

    2006-01-01

    This paper provides the system and conception of the Personification Control System (PCS) on the basis of Intelligent Control System based on Artificial life (ICS/AL), Artificial Emotion, Humanoid Control, and Intelligent Control System based on Field bus. According to system science and deciding of organize of biology, the Pyramid System of PCS are created. Then Pyramid System of PCS which is made up of PCS1/H, PCS1/S, PCS1/O, PCS1/C and PCS1/G is described.

  6. Networked control of microgrid system of systems

    Science.gov (United States)

    Mahmoud, Magdi S.; Rahman, Mohamed Saif Ur; AL-Sunni, Fouad M.

    2016-08-01

    The microgrid has made its mark in distributed generation and has attracted widespread research. However, microgrid is a complex system which needs to be viewed from an intelligent system of systems perspective. In this paper, a network control system of systems is designed for the islanded microgrid system consisting of three distributed generation units as three subsystems supplying a load. The controller stabilises the microgrid system in the presence of communication infractions such as packet dropouts and delays. Simulation results are included to elucidate the effectiveness of the proposed control strategy.

  7. D0 Cryo System Control System Autodialer

    Energy Technology Data Exchange (ETDEWEB)

    Urbin, J.; /Fermilab

    1990-04-17

    The DO cryogenic system is controlled by a TI565-PLC based control system. This allows the system to be unmanned when in steady state operation. System experts will need to be contacted when system parameters exceed normal operating points and reach alarm setpoints. The labwide FIRUS system provides one alarm monitor and communication link. An autodialer provides a second and more flexible alarm monitor and communication link. The autodialer monitors contact points in the control system and after receiving indication of an alarm accesses a list of experts which it calls until it receives an acknowledgement. There are several manufacturers and distributors of autodialer systems. This EN explains the search process the DO cryo group used to fmd an autodialer system that fit the cryo system's needs and includes information and specs for the unit we chose.

  8. Freshwater systems; Frisch gezapft

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, J.P.

    2008-06-09

    Increasingly, providers of solar systems are also offering freshwater systems, although these are more costly than combined storage systems. The contribution discusses the pros and cons of these systems as well as the freshwater quality. (orig.)

  9. Integrated library systems.

    Science.gov (United States)

    Goldstein, C M

    1983-07-01

    The development of integrated library systems is discussed. The four major discussion points are (1) initial efforts; (2) network resources; (3) minicomputer-based systems; and (4) beyond library automation. Four existing systems are cited as examples of current systems.

  10. System design specification Brayton Isotope Power System (BIPS) Flight System (FS), and Ground Demonstration System (GDS)

    Energy Technology Data Exchange (ETDEWEB)

    1976-06-14

    The system design specification for ground demonstration, development, and flight qualification of a Brayton Isotope Power System (BIPS) is presented. The requirements for both a BIPS conceptual Flight System (FS) and a Ground Demonstration System (GDS) are defined.

  11. Situation awareness with systems of systems

    CERN Document Server

    Tretmans, Jan; Borth, Michael

    2013-01-01

    This book discusses various aspects, challenges, and solutions for developing systems-of-systems for situation awareness, using applications in the domain of maritime safety and security.  Topics include advanced, multi-objective visualization methods for situation awareness, stochastic outlier selection, rule-based anomaly detection, an ontology-based event model for semantic reasoning, new methods for semi-automatic generation of adapters bridging communication gaps, security policies for systems-of-systems, trust assessment, and methods to deal with the dynamics of systems-of-systems in run-time monitoring, testing, and diagnosis. Architectural considerations for designing information-centric systems-of-systems such as situation awareness systems, and an integrated demonstrator implementing many of the investigated aspects, complete the book.

  12. Computer System Design System-on-Chip

    CERN Document Server

    Flynn, Michael J

    2011-01-01

    The next generation of computer system designers will be less concerned about details of processors and memories, and more concerned about the elements of a system tailored to particular applications. These designers will have a fundamental knowledge of processors and other elements in the system, but the success of their design will depend on the skills in making system-level tradeoffs that optimize the cost, performance and other attributes to meet application requirements. This book provides a new treatment of computer system design, particularly for System-on-Chip (SOC), which addresses th

  13. Determination of absolute threshold and just noticeable difference in the sensory perception of pungency.

    Science.gov (United States)

    Orellana-Escobedo, L; Ornelas-Paz, J J; Olivas, G I; Guerrero-Beltran, J A; Jimenez-Castro, J; Sepulveda, D R

    2012-03-01

    Absolute threshold and just noticeable difference (JND) were determined for the perception of pungency using chili pepper in aqueous solutions. Absolute threshold and JND were determined using 2 alternative forced-choice sensory tests tests. High-performance liquid chromatography technique was used to determine capsaicinoids concentration in samples used for sensory analysis. Sensory absolute threshold was 0.050 mg capsaicinoids/kg sample. Five JND values were determined using 5 reference solutions with different capsaicinoids concentration. JND values changed proportionally as capsaicinoids concentration of the reference sample solutions changed. Weber fraction remained stable for the first 4 reference capsaicinoid solutions (0.05, 0.11, 0.13, and 0.17 mg/kg) but changed when the most concentrated reference capsaicinoids solution was used (0.23 mg/kg). Quantification limit for instrumental analysis was 1.512 mg/kg capsaicinoids. Sensory methods employed in this study proved to be more sensitive than instrumental methods. Practical Application: A better understanding of the process involved in the sensory perception of pungency is currently required because "hot" foods are becoming more popular in western cuisine. Absolute thresholds and differential thresholds are useful tools in the formulation and development of new food products. These parameters may help in defining how much chili pepper is required in a formulated product to ensure a perceptible level of pungency, as well as in deciding how much more chili pepper is required in a product to produce a perceptible increase in its pungency.

  14. Smart electromechanical systems the central nervous system

    CERN Document Server

    Kurbanov, Vugar

    2017-01-01

    This book describes approaches to solving the problems of developing the central nervous system of robots (CNSR) based on smart electromechanical systems (SEMS) modules, principles of construction of the various modules of the central nervous system and variants of mathematical software CNSR in control systems for intelligent robots. It presents the latest advances in theory and practice at the Russian Academy of Sciences. Developers of intelligent robots to solve modern problems in robotics are increasingly addressing the use of the bionic approach to create robots that mimic the complexity and adaptability of biological systems. These have smart electromechanical system (SEMS), which are used in various cyber-physical systems (CPhS), and allow the functions of calculation, control, communications, information storage, monitoring, measurement and control of parameters and environmental parameters to be integrated. The behavior of such systems is based on the information received from the central nervous syst...

  15. Linking Political Systems and War Systems

    DEFF Research Database (Denmark)

    Harste, Gorm

    2009-01-01

    Decisive parts of the Western political system have demonstrated a seemingly surprising misinterpretation of military might. As Madelaine Albright has suggested, the mighty perceived themselves as "almighty". Political power seems to have invested in instrumental coercive power relations and found...... military coercion to be the appropriate mean. Using the system theory and the theory of systemic risks displayed by the German sociologist Niklas Luhmann the article demonstrates how military systems due to their own autonomy and autopoiesis do not fit into the idea of political government....... The Clausewitzian ideal of a political system that could continue its power games by means of war was moderated by Clausewitz' own analysis of "friction". How can a political system be so blind towards the possibilities of another system? What are the risks of systemic blind spots? The argument of the paper...

  16. Designing information systems

    CERN Document Server

    Blethyn, Stanley G

    2014-01-01

    Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

  17. LCLS XTOD Attenuator System System Concept Report

    Energy Technology Data Exchange (ETDEWEB)

    Kishiyama, K; Roeben, M; Trent, J; Ryutov, D; Shen, S

    2006-04-12

    The attenuator system for the Linac Coherent Light Source (LCLS) X-ray Transport, Optics and Diagnostics (XTOD) system has been configured and analyzed by the Lawrence Livermore National Laboratory's New Technologies Engineering Division (NTED) as requested by the SLAC/LCLS program. The system layout, performance analyses and selection of the vacuum components are presented in this System Conceptual Review (SCR) report. Also included are the plans for prototype, procurement, mechanical integration, and the cost estimates.

  18. Engine Auxiliary System Guideline: Lubricating Oil Systems

    OpenAIRE

    Linna, Joni

    2015-01-01

    This thesis was done for Wärtsilä Technical Services organization, the purpose of this work was to gather and structure information about the lubricating oil systems from the company’s internal databases, interviews with system specialists and from different literature sources covering Ship Power and Power Plant products. The outcome was a guideline, covering typical power plant and marine system descriptions, all components used in the lubricating oil system with their functional description...

  19. COMPARISON TRADITIONAL SYSTEMS OF TUNNEL FORMWORK SYSTEM

    OpenAIRE

    ERKAN, İbrahim Hakkı; Yılmaz, Ülkü Sultan; Türken, Hakan

    2011-01-01

    Tunnel formwork systems became the most widespread construction technology preferred in recent years in Turkey due to rapidity and economy. In this study, before all else, a brief information was given about the types and construction techniques of tunnel formwork systems. Then a reinforced concrete building sample was firstly modeled as it was constructed with the tunnel formwork system and secondly modeled as it was formed by a frame system with shear walls constructed by the traditional re...

  20. Modeling learning technology systems as business systems

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon; Papaspyrou, Nikolaos

    2003-01-01

    The design of Learning Technology Systems, and the Software Systems that support them, is largely conducted on an intuitive, ad hoc basis, thus resulting in inefficient systems that defectively support the learning process. There is now justifiable, increasing effort in formalizing the engineering o

  1. The complement system in systemic autoimmune disease

    NARCIS (Netherlands)

    Chen, Min; Daha, Mohamed R.; Kallenberg, Cees G. M.

    2010-01-01

    Complement is part of the innate immune system. Its major function is recognition and elimination of pathogens via direct killing and/or stimulation of phagocytosis. Activation of the complement system is, however, also involved in the pathogenesis of the systemic autoimmune diseases. Activation via

  2. General Systems Theory and Instructional Systems Design.

    Science.gov (United States)

    Salisbury, David F.

    1990-01-01

    Describes basic concepts in the field of general systems theory (GST) and identifies commonalities that exist between GST and instructional systems design (ISD). Models and diagrams that depict system elements in ISD are presented, and two matrices that show how GST has been used in ISD literature are included. (11 references) (LRW)

  3. Observing System Evaluations Using GODAE Systems

    Science.gov (United States)

    2009-09-01

    Journal of Marine Systems 35...dimensional temperature fields: A first approach based on simulated observations. Journal of Marine Systems 46:85-98. Langland, R.H., and N.L. Baker...capabilities of multisatellite altimeter missions: First results with real data in the Mediterranean Sea. Journal of Marine Systems 65:190-211.

  4. Optical system defect propagation in ABCD systems

    DEFF Research Database (Denmark)

    McKinley, W.G.; Yura, H.T.; Hanson, Steen Grüner

    1988-01-01

    We describe how optical system defects (tilt/jitter, decenter, and despace) propagate through an arbitrary paraxial optical system that can be described by an ABCD ray transfer matrix. A pedagogical example is given that demonstrates the effect of alignment errors on a typical optical system....... © 1988 Optical Society of America...

  5. Expert Systems for auditing management information systems

    Directory of Open Access Journals (Sweden)

    Gheroghe Popescu

    2007-05-01

    Full Text Available Expert systems are built with the help of: specialised programming languages or expert system generators (shell. But this structure was reached after tens of years of work and research, because expert systems are nothing but pragmatic capitalisation of the results of research carried out in artificial intelligence and theory of knowledge.

  6. Non linear system become linear system

    Directory of Open Access Journals (Sweden)

    Petre Bucur

    2007-01-01

    Full Text Available The present paper refers to the theory and the practice of the systems regarding non-linear systems and their applications. We aimed the integration of these systems to elaborate their response as well as to highlight some outstanding features.

  7. Operating System Security

    CERN Document Server

    Jaeger, Trent

    2008-01-01

    Operating systems provide the fundamental mechanisms for securing computer processing. Since the 1960s, operating systems designers have explored how to build "secure" operating systems - operating systems whose mechanisms protect the system against a motivated adversary. Recently, the importance of ensuring such security has become a mainstream issue for all operating systems. In this book, we examine past research that outlines the requirements for a secure operating system and research that implements example systems that aim for such requirements. For system designs that aimed to

  8. Psychology of system design

    CERN Document Server

    Meister, D

    2014-01-01

    This is a book about systems, including: systems in which humans control machines; systems in which humans interact with humans and the machine component is relatively unimportant; systems which are heavily computerized and those that are not; and governmental, industrial, military and social systems. The book deals with both traditional systems like farming, fishing and the military, and with systems just now tentatively emerging, like the expert and the interactive computer system. The emphasis is on the system concept and its implications for analysis, design and evaluation of these many di

  9. Biomedical signals and systems

    CERN Document Server

    Tranquillo, Joseph V

    2013-01-01

    Biomedical Signals and Systems is meant to accompany a one-semester undergraduate signals and systems course. It may also serve as a quick-start for graduate students or faculty interested in how signals and systems techniques can be applied to living systems. The biological nature of the examples allows for systems thinking to be applied to electrical, mechanical, fluid, chemical, thermal and even optical systems. Each chapter focuses on a topic from classic signals and systems theory: System block diagrams, mathematical models, transforms, stability, feedback, system response, control, time

  10. Autonomous photovoltaic lighting system

    OpenAIRE

    Ahmed A. A. Hafez; Montesinos Miracle, Daniel; Sudrià Andreu, Antoni

    2012-01-01

    This paper introduces a comparison between the conventional and Photovoltaic (PV) lighting systems. A simple sizing procedure for a PV stand-alone system was advised. The paper also proposes a novel PV lighting system. The proposed system is simple, compact and reliable. The system operation was investigated by thoroughly mathematical and simulation work.

  11. Lighting system with thermal management system

    Energy Technology Data Exchange (ETDEWEB)

    Arik, Mehmet; Weaver, Stanton Earl; Stecher, Thomas Elliot; Seeley, Charles Erklin; Kuenzler, Glenn Howard; Wolfe, Jr, Charles Franklin; Utturkar, Yogen Vishwas; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

    2016-10-11

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

  12. Lighting system with thermal management system

    Science.gov (United States)

    Arik, Mehmet; Weaver, Stanton; Stecher, Thomas; Seeley, Charles; Kuenzler, Glenn; Wolfe, Jr., Charles; Utturkar, Yogen; Sharma, Rajdeep; Prabhakaran, Satish; Icoz, Tunc

    2013-05-07

    Lighting systems having unique configurations are provided. For instance, the lighting system may include a light source, a thermal management system and driver electronics, each contained within a housing structure. The light source is configured to provide illumination visible through an opening in the housing structure. The thermal management system is configured to provide an air flow, such as a unidirectional air flow, through the housing structure in order to cool the light source. The driver electronics are configured to provide power to each of the light source and the thermal management system.

  13. Systems Measures of Water Distribution System Resilience

    Energy Technology Data Exchange (ETDEWEB)

    Klise, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Murray, Regan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walker, La Tonya Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-01-01

    Resilience is a concept that is being used increasingly to refer to the capacity of infrastructure systems to be prepared for and able to respond effectively and rapidly to hazardous events. In Section 2 of this report, drinking water hazards, resilience literature, and available resilience tools are presented. Broader definitions, attributes and methods for measuring resilience are presented in Section 3. In Section 4, quantitative systems performance measures for water distribution systems are presented. Finally, in Section 5, the performance measures and their relevance to measuring the resilience of water systems to hazards is discussed along with needed improvements to water distribution system modeling tools.

  14. Operating System Performance Analyzer for Embedded Systems

    Directory of Open Access Journals (Sweden)

    Shahzada Khayyam Nisar

    2011-11-01

    Full Text Available RTOS provides a number of services to an embedded system designs such as case management, memory management, and Resource Management to build a program. Choosing the best OS for an embedded system is based on the available OS for system designers and their previous knowledge and experience. This can cause an imbalance between the OS and embedded systems. RTOS performance analysis is critical in the design and integration of embedded software to ensure that limits the application meet at runtime. To select an appropriate operating system for an embedded system for a particular application, the OS services to be analyzed. These OS services are identified by parameters to establish performance metrics. Performance Metrics selected include context switching, Preemption time and interrupt latency. Performance Metrics are analyzed to choose the right OS for an embedded system for a particular application.

  15. Mapping biological systems to network systems

    CERN Document Server

    Rathore, Heena

    2016-01-01

    The book presents the challenges inherent in the paradigm shift of network systems from static to highly dynamic distributed systems – it proposes solutions that the symbiotic nature of biological systems can provide into altering networking systems to adapt to these changes. The author discuss how biological systems – which have the inherent capabilities of evolving, self-organizing, self-repairing and flourishing with time – are inspiring researchers to take opportunities from the biology domain and map them with the problems faced in network domain. The book revolves around the central idea of bio-inspired systems -- it begins by exploring why biology and computer network research are such a natural match. This is followed by presenting a broad overview of biologically inspired research in network systems -- it is classified by the biological field that inspired each topic and by the area of networking in which that topic lies. Each case elucidates how biological concepts have been most successfully ...

  16. Systems Architecture for a Nationwide Healthcare System.

    Science.gov (United States)

    Abin, Jorge; Nemeth, Horacio; Friedmann, Ignacio

    2015-01-01

    From a national level to give Internet technology support, the Nationwide Integrated Healthcare System in Uruguay requires a model of Information Systems Architecture. This system has multiple healthcare providers (public and private), and a strong component of supplementary services. Thus, the data processing system should have an architecture that considers this fact, while integrating the central services provided by the Ministry of Public Health. The national electronic health record, as well as other related data processing systems, should be based on this architecture. The architecture model described here conceptualizes a federated framework of electronic health record systems, according to the IHE affinity model, HL7 standards, local standards on interoperability and security, as well as technical advice provided by AGESIC. It is the outcome of the research done by AGESIC and Systems Integration Laboratory (LINS) on the development and use of the e-Government Platform since 2008, as well as the research done by the team Salud.uy since 2013.

  17. Calo trigger acquisition system

    CERN Multimedia

    Franchini, Matteo

    2016-01-01

    Calo trigger acquisition system - Evolution of the acquisition system from a multiple boards system (upper, orange cables) to a single board one (below, light blue cables) where all the channels are collected in a single board.

  18. What Are Expert Systems?

    Science.gov (United States)

    d'Agapeyeff, A.

    1986-01-01

    Intended for potential business users, this paper describes the main characteristics of expert systems; discusses practical use considerations; presents a taxonomy of the systems; and reviews several expert system development projects in business and industry. (MBR)

  19. for hybrid dynamical systems

    Directory of Open Access Journals (Sweden)

    Wassim M. Haddad

    2001-01-01

    Full Text Available In this paper we develop a unified dynamical systems framework for a general class of systems possessing left-continuous flows; that is, left-continuous dynamical systems. These systems are shown to generalize virtually all existing notions of dynamical systems and include hybrid, impulsive, and switching dynamical systems as special cases. Furthermore, we generalize dissipativity, passivity, and nonexpansivity theory to left-continuous dynamical systems. Specifically, the classical concepts of system storage functions and supply rates are extended to left-continuous dynamical systems providing a generalized hybrid system energy interpretation in terms of stored energy, dissipated energy over the continuous-time dynamics, and dissipated energy over the resetting events. Finally, the generalized dissipativity notions are used to develop general stability criteria for feedback interconnections of left-continuous dynamical systems. These results generalize the positivity and small gain theorems to the case of left-continuous, hybrid, and impulsive dynamical systems.

  20. Manned systems technology discipline

    Science.gov (United States)

    Bretoi, Remus

    1990-01-01

    Viewgraphs on manned systems technology discipline for Space Station Freedom are presented. Topics covered include: crew-systems interfaces and interactions; crew training; on-board systems maintenance and support; habitability and environment; and computational human factors.

  1. Bridge Management Systems

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way....

  2. Autonomic Nervous System Disorders

    Science.gov (United States)

    Your autonomic nervous system is the part of your nervous system that controls involuntary actions, such as the beating of your heart ... breathing and swallowing Erectile dysfunction in men Autonomic nervous system disorders can occur alone or as the result ...

  3. Brain and Nervous System

    Science.gov (United States)

    ... Your 1- to 2-Year-Old Brain and Nervous System KidsHealth > For Parents > Brain and Nervous System Print ... brain is quite the juggler. Anatomy of the Nervous System If you think of the brain as a ...

  4. The Trinity System

    Energy Technology Data Exchange (ETDEWEB)

    Archer, Billy Joe [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vigil, Benny Manuel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-13

    This paper describes the Trinity system, the first ASC Advanced Technology System (ATS-1). We describe the Trinity procurement timeline, the ASC computing strategy, the Trinity specific mission needs, and the Trinity system specifications.

  5. Law System in Japan

    OpenAIRE

    Andreea Lorena Ponaru

    2007-01-01

    This article attempts to present and explain the main features of the japanese law system. Japanese Law system was reformed during the domination of Tokugawa shogun family. In 1870, Foreign Governmental Systems Study Office was founded. By judicial sentences many french laws were introduced in Japanese law system. Roma-Tokyo-Berlin Alliance (1936) introduced a strong German influence in the law system. The Japanese judicial system has known five periods. In the first (1869-1888) were introduc...

  6. Small test SDHW systems

    DEFF Research Database (Denmark)

    Vejen, Niels Kristian

    1999-01-01

    Three small test SDHW systems was tested in a laboratory test facility.The three SDHW systems where all based on the low flow principe and a mantle tank but the design of the systems where different.......Three small test SDHW systems was tested in a laboratory test facility.The three SDHW systems where all based on the low flow principe and a mantle tank but the design of the systems where different....

  7. Battery systems engineering

    CERN Document Server

    Rahn, Christopher D

    2012-01-01

    A complete all-in-one reference on the important interdisciplinary topic of Battery Systems Engineering Focusing on the interdisciplinary area of battery systems engineering, this book provides the background, models, solution techniques, and systems theory that are necessary for the development of advanced battery management systems. It covers the topic from the perspective of basic electrochemistry as well as systems engineering topics and provides a basis for battery modeling for system engineering of electric and hybrid electric vehicle platforms. This original

  8. Neural Systems Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — As part of the Electrical and Computer Engineering Department and The Institute for System Research, the Neural Systems Laboratory studies the functionality of the...

  9. Aeronautical Information System -

    Data.gov (United States)

    Department of Transportation — The Aeronautical Information System (AIS) is a leased weather automated system that provides a means of collecting and distributing aeronautical weather information...

  10. RECURSIVE SYSTEM IDENTIFICATION

    Institute of Scientific and Technical Information of China (English)

    Han-Fu Chen

    2009-01-01

    Most of existing methods in system identification with possible exception of those for linear systems are off-line in nature, and hence are nonrecursive.This paper demonstrates the recent progress in recursive system identification.The recursive identifi-cation algorithms are presented not only for linear systems (multivariate ARMAX systems) but also for nonlinear systems such as the Hammerstein and Wiener systems, and the non-linear ARX systems.The estimates generated by the algorithms are online updated and converge a.s.to the true values as time tends to infinity.

  11. Control system design method

    Science.gov (United States)

    Wilson, David G [Tijeras, NM; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  12. Airports Geographic Information System -

    Data.gov (United States)

    Department of Transportation — The Airports Geographic Information System maintains the airport and aeronautical data required to meet the demands of the Next Generation National Airspace System....

  13. Credit Management System

    Data.gov (United States)

    US Agency for International Development — Credit Management System. Outsourced Internet-based application. CMS stores and processes data related to USAID credit programs. The system provides information...

  14. Integrated Systems Health Management for Intelligent Systems

    Science.gov (United States)

    Figueroa, Fernando; Melcher, Kevin

    2011-01-01

    The implementation of an integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive at an accurate and reliable assessment of its health. In this paper, concepts, procedures, and approaches are presented as a foundation for implementing an intelligent systems ]relevant ISHM capability. The capability stresses integration of DIaK from all elements of a system. Both ground-based (remote) and on-board ISHM capabilities are compared and contrasted. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems.

  15. Epilogue: Systems Approaches and Systems Practice

    Science.gov (United States)

    Reynolds, Martin; Holwell, Sue

    Each of the five systems approaches discussed in this volume: system dynamics (SD), the viable systems model (VSM), strategic options development and analysis (SODA), soft systems methodology (SSM) and critical systems heuristics (CSH) has a pedigree. Not in the sense of the sometimes absurd spectacle of animals paraded at dog shows. Rather, their pedigree derives from their systems foundations, their capacity to evolve and their flexibility in use. None of the five approaches has developed out of use in restricted and controlled contexts of either low or high levels of complicatedness. Neither has any one of them evolved as a consequence of being applied only to situations with either presumed stakeholder agreement on purpose, or courteous disagreement amongst stakeholders, or stakeholder coercion. The compilation is not a celebration of abstract ‘methodologies', but of theoretically robust approaches that have a genuine pedigree in practice.

  16. Metadata Management System for Healthcare Information Systems

    OpenAIRE

    Patil, Ketan Shripat

    2011-01-01

    The Utah Department of Health (UDOH) uses multiple and diverse healthcare information systems for managing, maintaining, and sharing the health information. To keep track of the important details about these information systems such as the operational details, data semantics, data exchange standards, and personnel responsible for maintaining and managing it is a monumental task, with several limitations. This report describes the design and implementation of the Metadata Management System (MD...

  17. L-system fractals

    CERN Document Server

    Mishra, Jibitesh

    2007-01-01

    The book covers all the fundamental aspects of generating fractals through L-system. Also it provides insight to various researches in this area for generating fractals through L-system approach & estimating dimensions. Also it discusses various applications of L-system fractals. Key Features: - Fractals generated from L-System including hybrid fractals - Dimension calculation for L-system fractals - Images & codes for L-system fractals - Research directions in the area of L-system fractals - Usage of various freely downloadable tools in this area - Fractals generated from L-System including hybrid fractals- Dimension calculation for L-system fractals- Images & codes for L-system fractals- Research directions in the area of L-system fractals- Usage of various freely downloadable tools in this area

  18. Forming different planetary systems

    Institute of Scientific and Technical Information of China (English)

    Ji-Lin Zhou; Ji-Wei Xie; Hui-Gen Liu; Hui Zhang; Yi-Sui Sun

    2012-01-01

    With the increasing number of detected exoplanet samples,the statistical properties of planetary systems have become much clearer.In this review,we summarize the major statistical results that have been revealed mainly by radial velocity and transiting observations,and try to interpret them within the scope of the classical core-accretion scenario of planet formation,especially in the formation of different orbital architectures for planetary systems around main sequence stars.Based on the different possible formation routes for different planet systems,we tentatively classify them into three major catalogs:hot Jupiter systems,standard systems and distant giant planet systems.The standard systems can be further categorized into three sub-types under different circumstances:solar-like systems,hot Super-Earth systems,and subgiant planet systems.We also review the theory of planet detection and formation in binary systems as well as planets in star clusters.

  19. Hot Spot Removal System: System description

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    Hazardous wastes contaminated with radionuclides, chemicals, and explosives exist across the Department of Energy complex and need to be remediated due to environmental concerns. Currently, an opportunity is being developed to dramatically reduce remediation costs and to assist in the acceleration of schedules associated with these wastes by deploying a Hot Spot Removal System. Removing the hot spot from the waste site will remove risk driver(s) and enable another, more cost effective process/option/remedial alternative (i.e., capping) to be applied to the remainder of the site. The Hot Spot Removal System consists of a suite of technologies that will be utilized to locate and remove source terms. Components of the system can also be used in a variety of other cleanup activities. This Hot Spot Removal System Description document presents technologies that were considered for possible inclusion in the Hot Spot Removal System, technologies made available to the Hot Spot Removal System, industrial interest in the Hot Spot Removal System`s subsystems, the schedule required for the Hot Spot Removal System, the evaluation of the relevant technologies, and the recommendations for equipment and technologies as stated in the Plan section.

  20. Novel central nervous system drug delivery systems.

    Science.gov (United States)

    Stockwell, Jocelyn; Abdi, Nabiha; Lu, Xiaofan; Maheshwari, Oshin; Taghibiglou, Changiz

    2014-05-01

    For decades, biomedical and pharmaceutical researchers have worked to devise new and more effective therapeutics to treat diseases affecting the central nervous system. The blood-brain barrier effectively protects the brain, but poses a profound challenge to drug delivery across this barrier. Many traditional drugs cannot cross the blood-brain barrier in appreciable concentrations, with less than 1% of most drugs reaching the central nervous system, leading to a lack of available treatments for many central nervous system diseases, such as stroke, neurodegenerative disorders, and brain tumors. Due to the ineffective nature of most treatments for central nervous system disorders, the development of novel drug delivery systems is an area of great interest and active research. Multiple novel strategies show promise for effective central nervous system drug delivery, giving potential for more effective and safer therapies in the future. This review outlines several novel drug delivery techniques, including intranasal drug delivery, nanoparticles, drug modifications, convection-enhanced infusion, and ultrasound-mediated drug delivery. It also assesses possible clinical applications, limitations, and examples of current clinical and preclinical research for each of these drug delivery approaches. Improved central nervous system drug delivery is extremely important and will allow for improved treatment of central nervous system diseases, causing improved therapies for those who are affected by central nervous system diseases.

  1. Power system protection 2 systems and methods

    CERN Document Server

    1995-01-01

    The worldwide growth in demand for electricity has forced the pace of developments in electrical power system design to meet consumer needs for reliable, secure and cheap supplies. Power system protection, as a technology essential to high quality supply, is widely recognised as a specialism of growing and often critical importance, in which power system needs and technological progress have combined to result in rapid developments in policy and practice in recent years. In the United Kingdom, the need for appropriate training in power system protection was recognised in the early 1960s with t

  2. Recommender Systems for Social Tagging Systems

    CERN Document Server

    Balby Marinho, Leandro

    2012-01-01

    Social Tagging Systems are web applications in which users upload resources (e.g., bookmarks, videos, photos, etc.) and annotate it with a list of freely chosen keywords called tags. This is a grassroots approach to organize a site and help users to find the resources they are interested in. Social tagging systems are open and inherently social; features that have been proven to encourage participation. However, with the large popularity of these systems and the increasing amount of user-contributed content, information overload rapidly becomes an issue. Recommender Systems are well known appl

  3. Site systems engineering: Systems engineering management plan

    Energy Technology Data Exchange (ETDEWEB)

    Grygiel, M.L. [Westinghouse Hanford Co., Richland, WA (United States)

    1996-05-03

    The Site Systems Engineering Management Plan (SEMP) is the Westinghouse Hanford Company (WHC) implementation document for the Hanford Site Systems Engineering Policy, (RLPD 430.1) and Systems Engineering Criteria Document and Implementing Directive, (RLID 430.1). These documents define the US Department of Energy (DOE), Richland Operations Office (RL) processes and products to be used at Hanford to implement the systems engineering process at the site level. This SEMP describes the products being provided by the site systems engineering activity in fiscal year (FY) 1996 and the associated schedule. It also includes the procedural approach being taken by the site level systems engineering activity in the development of these products and the intended uses for the products in the integrated planning process in response to the DOE policy and implementing directives. The scope of the systems engineering process is to define a set of activities and products to be used at the site level during FY 1996 or until the successful Project Hanford Management Contractor (PHMC) is onsite as a result of contract award from Request For Proposal DE-RP06-96RL13200. Following installation of the new contractor, a long-term set of systems engineering procedures and products will be defined for management of the Hanford Project. The extent to which each project applies the systems engineering process and the specific tools used are determined by the project`s management.

  4. Characterization of 12 Capsicum varieties by evaluation of their carotenoid profile and pungency determination.

    Science.gov (United States)

    Giuffrida, Daniele; Dugo, Paola; Torre, Germana; Bignardi, Chiara; Cavazza, Antonella; Corradini, Claudio; Dugo, Giacomo

    2013-10-15

    In this research 12 different varieties of Capsicum cultivars belonging to three species (Capsicum chinense, Capsicum annuum, Capsicum frutescens) and of various colour, shape, and dimension have been characterised by their carotenoids and capsaicinoids content. The berries were cultivated in the region Emilia-Romagna, in Northern Italy. The native carotenoid composition was directly investigated by an HPLC-DAD-APCI-MS methodology, for the first time. In total, 52 carotenoids have been identified and considerable variation in carotenoid composition was observed among the various cultivars investigated. Among the cultivars with red colour, some Habanero, Naga morich and Sinpezon showed an high β-carotene content, whereas Serrano, Tabasco and Jalapeno showed an high capsanthin content and the absence of β-carotene. Habanero golden and Scotch Bonnet showed a high lutein, α-carotene and β-carotene amounts, and Habanero orange was rich in antheraxanthin, capsanthin and zeaxanthin. Cis-cryptocapsin was present in high amount in Habanero chocolate. The qualitative and quantitative determination of the capsaicinoids, alkaloids responsible for the pungency level, has also been estimated by a validated chromatographic procedure (HPLC-DAD) after a preliminary drying step and an opportune extraction procedure. Results have also been expressed in Scoville units. Dry matter and water activity have also been established on the fresh berries. The dried peppers of each variety were then submitted to the evaluation of the total nitrogen content, measured by a Dumas system, permitting to provide information on the protein content that was found to be in the range between 7 and 16%.

  5. ERP–systems

    OpenAIRE

    Shustova I.

    2016-01-01

    In this work, we analyzed the existing ERP–systems of foreign and domestic manufacturers. Popular ERP–systems in the Republic of Belarus were considered. The leading ERP-systems in the domestic market and their features were described in detail. Finally, we described the steps that must be taken to select the most suitable ERP-system for a particular company.

  6. Information Systems Security Audit

    Directory of Open Access Journals (Sweden)

    Gheorghe Popescu

    2007-12-01

    Full Text Available The article covers:Defining an information system; benefits obtained by introducing new information technologies; IT management;Defining prerequisites, analysis, design, implementation of IS; Information security management system; aspects regarding IS security policy; Conceptual model of a security system; Auditing information security systems and network infrastructure security.

  7. Hybrid intelligent engineering systems

    CERN Document Server

    Jain, L C; Adelaide, Australia University of

    1997-01-01

    This book on hybrid intelligent engineering systems is unique, in the sense that it presents the integration of expert systems, neural networks, fuzzy systems, genetic algorithms, and chaos engineering. It shows that these new techniques enhance the capabilities of one another. A number of hybrid systems for solving engineering problems are presented.

  8. CDMA systems capacity engineering

    CERN Document Server

    Kim, Kiseon

    2004-01-01

    This new hands-on resource tackles capacity planning and engineering issues that are crucial to optimizing wireless communication systems performance. Going beyond the system physical level and investigating CDMA system capacity at the service level, this volume is the single-source for engineering and analyzing systems capacity and resources.

  9. Expert Systems: An Overview.

    Science.gov (United States)

    Adiga, Sadashiv

    1984-01-01

    Discusses: (1) the architecture of expert systems; (2) features that distinguish expert systems from conventional programs; (3) conditions necessary to select a particular application for the development of successful expert systems; (4) issues to be resolved when building expert systems; and (5) limitations. Examples of selected expert systems…

  10. Universal Index System

    Science.gov (United States)

    Kelley, Steve; Roussopoulos, Nick; Sellis, Timos; Wallace, Sarah

    1993-01-01

    The Universal Index System (UIS) is an index management system that uses a uniform interface to solve the heterogeneity problem among database management systems. UIS provides an easy-to-use common interface to access all underlying data, but also allows different underlying database management systems, storage representations, and access methods.

  11. Measuring Systemic Risk

    DEFF Research Database (Denmark)

    Acharya, Viral V.; Heje Pedersen, Lasse; Philippon, Thomas

    We present a simple model of systemic risk and we show that each financial institution's contribution to systemic risk can be measured as its systemic expected shortfall (SES), i.e., its propensity to be undercapitalized when the system as a whole is undercapitalized. SES increases...

  12. STEP electronic system design

    Science.gov (United States)

    Couch, R. H.; Johnson, J. W.

    1984-01-01

    The STEP electronic system design is discussed. The purpose of the design is outlined. The electronic system design is summarized and it is found that: an effective conceptual system design is developed; the design represents a unique set of capabilities; makes efficient use of available orbiter resources; the system capabilities exceed identified potential experiment needs.

  13. Medical imaging systems

    Science.gov (United States)

    Frangioni, John V

    2013-06-25

    A medical imaging system provides simultaneous rendering of visible light and diagnostic or functional images. The system may be portable, and may include adapters for connecting various light sources and cameras in open surgical environments or laparascopic or endoscopic environments. A user interface provides control over the functionality of the integrated imaging system. In one embodiment, the system provides a tool for surgical pathology.

  14. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  15. Information Systems Security Audit

    OpenAIRE

    Gheorghe Popescu; Veronica Adriana Popescu; Cristina Raluca Popescu

    2007-01-01

    The article covers:Defining an information system; benefits obtained by introducing new information technologies; IT management;Defining prerequisites, analysis, design, implementation of IS; Information security management system; aspects regarding IS security policy; Conceptual model of a security system; Auditing information security systems and network infrastructure security.

  16. Type Systems for Bigraphs

    DEFF Research Database (Denmark)

    Elsborg, Ebbe; Hildebrandt, Thomas; Sangiorgi, Davide

    of controls and a set of reaction rules, collectively a bigraphical reactive system (BRS). Possible advantages of developing bigraphical type systems include: a deeper understanding of a type system itself and its properties; transfer of the type systems to the concrete family of calculi that the BRS models...

  17. Exploring Enterprise, System of Systems, and System and Software Architectures

    Science.gov (United States)

    2016-06-13

    might. • For example, software architects often lament the lateness with which they are brought into system engineering projects. • All of these...Enterprise architects compose holistic solutions that address the business challenges of the enterprise and support the governance needed to...network. • Today, Army systems are connected to inter-agency networks, and change management is even more critical. • Army enterprise architects must

  18. On generalized Volterra systems

    Science.gov (United States)

    Charalambides, S. A.; Damianou, P. A.; Evripidou, C. A.

    2015-01-01

    We construct a large family of evidently integrable Hamiltonian systems which are generalizations of the KM system. The algorithm uses the root system of a complex simple Lie algebra. The Hamiltonian vector field is homogeneous cubic but in a number of cases a simple change of variables transforms such a system to a quadratic Lotka-Volterra system. We present in detail all such systems in the cases of A3, A4 and we also give some examples from higher dimensions. We classify all possible Lotka-Volterra systems that arise via this algorithm in the An case.

  19. Dynamical system synchronization

    CERN Document Server

    Luo, Albert C J

    2013-01-01

    Dynamical System Synchronization (DSS) meticulously presents for the first time the theory of dynamical systems synchronization based on the local singularity theory of discontinuous dynamical systems. The book details the sufficient and necessary conditions for dynamical systems synchronizations, through extensive mathematical expression. Techniques for engineering implementation of DSS are clearly presented compared with the existing techniques.  This book also:  Presents novel concepts and methods for dynamical system synchronization Extends beyond the Lyapunov theory for dynamical system synchronization Introduces companion and synchronization of discrete dynamical systems Includes local singularity theory for discontinuous dynamical systems Covers the invariant domains of synchronization Features more than 75 illustrations Dynamical System Synchronization is an ideal book for those interested in better understanding new concepts and methodology for dynamical system synchronization, local singularity...

  20. [Universal coaxial anesthetic system].

    Science.gov (United States)

    Ungerer, M J; le Roux, F P

    1978-02-25

    A true universal co-axial anaesthetic system has been designed. This system may be used either as a Mapleson A circuit during spontaneous ventilation or as a Mapleson D circuit during controlled ventilation. Conversion to either system may be conveniently carried out by interchanging the pop-off valve and fresh gas inlet, without disconnecting the system from the patient. Resistance to flow of both tubes has been measured and was found to be within acceptable limits. The efficiency of this system in a Mapleson A arrangement was compared with that of a conventional Magill circuit during spontaneous breathing in 2 conscious volunteers. It was shown that no significant difference exists between these systems eith regard to rebreathing, and that the universal co-axial system may be used as efficiently and economically as the Magill circuit during spontaneous ventilation. The co-axial system can be easily connected to a circle system, combining the advantages of the two systems.

  1. Variable Structure Systems and Systems Zeros

    OpenAIRE

    El-Ghezawi, O.M.E.; S. A. Billings; Zinober, A.S.I.

    1981-01-01

    The analysis of variable structure systems in the sliding mode yields the concept of equivalent control which leads naturally to a new method for determining the zeros and zero directions of linear multivariable systems. The analysis presented is conceptually easy and computationally attractive.

  2. The Solar System as an Exoplanetary System

    CERN Document Server

    Martin, Rebecca G

    2015-01-01

    With the availability of considerably more data, we revisit the question of how special our Solar System is, compared to observed exoplanetary systems. To this goal, we employ a mathematical transformation that allows for a meaningful, statistical comparison. We find that the masses and densities of the giant planets in our Solar System are very typical, as is the age of the Solar System. While the orbital location of Jupiter is somewhat of an outlier, this is most likely due to strong selection effects towards short-period planets. The eccentricities of the planets in our Solar System are relatively small compared to those in observed exosolar systems, but still consistent with the expectations for an 8-planet system (and could, in addition, reflect a selection bias towards high-eccentricity planets). The two characteristics of the Solar System that we find to be most special are the lack of super-Earths with orbital periods of days to months and the general lack of planets inside of the orbital radius of Me...

  3. Applications of membrane systems in distributed systems

    Institute of Scientific and Technical Information of China (English)

    Aneta Binder; Rudolf Freund; Georg Lojka; Marion Oswald

    2007-01-01

    Based on the biological model of cell-to-cell communication proposed by A. Rustom et al. (Science, 2004, 303: 1007-1010), we investigate the possibilities to apply P systems with dynamic channels transporting membrane vesicles for describing processes in distributed systems.

  4. Performance, Performance System, and High Performance System

    Science.gov (United States)

    Jang, Hwan Young

    2009-01-01

    This article proposes needed transitions in the field of human performance technology. The following three transitions are discussed: transitioning from training to performance, transitioning from performance to performance system, and transitioning from learning organization to high performance system. A proposed framework that comprises…

  5. Photovoltaic systems and applications

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Abstracts are given of presentations given at a project review meeting held at Albuquerque, NM. The proceedings cover the past accomplishments and current activities of the Photovoltaic Systems Research, Balance-of-System Technology Development and System Application Experiments Projects at Sandia National Laboratories. The status of intermediate system application experiments and residential system analysis is emphasized. Some discussion of the future of the Photovoltaic Program in general, and the Sandia projects in particular is also presented.

  6. HYBRID VEHICLE CONTROL SYSTEM

    Directory of Open Access Journals (Sweden)

    V. Dvadnenko

    2016-06-01

    Full Text Available The hybrid vehicle control system includes a start–stop system for an internal combustion engine. The system works in a hybrid mode and normal vehicle operation. To simplify the start–stop system, there were user new possibilities of a hybrid car, which appeared after the conversion. Results of the circuit design of the proposed system of basic blocks are analyzed.

  7. Intrusion Detection System: Security Monitoring System

    Directory of Open Access Journals (Sweden)

    ShabnamNoorani,

    2015-10-01

    Full Text Available An intrusion detection system (IDS is an ad hoc security solution to protect flawed computer systems. It works like a burglar alarm that goes off if someone tampers with or manages to get past other security mechanisms such as authentication mechanisms and firewalls. An Intrusion Detection System (IDS is a device or a software application that monitors network or system activities for malicious activities or policy violations and produces reports to a management station.Intrusion Detection System (IDS has been used as a vital instrument in defending the network from this malicious or abnormal activity..In this paper we are comparing host based and network based IDS and various types of attacks possible on IDS.

  8. Systems Theory and Systems Approach to Leadership

    Directory of Open Access Journals (Sweden)

    Dr.Sc. Berim Ramosaj

    2014-06-01

    Full Text Available Systems theory is product of the efforts of many researchers to create an intermediate field of coexistence of all sciences. If not for anything else, because of the magnitude that the use of systemic thinking and systemic approach has taken, it has become undisputed among the theories. Systems theory not only provides a glossary of terms with which researchers from different fields can be understood, but provides a framework for the presentation and interpretation of phenomena and realities. This paper addresses a systematic approach to leadership, as an attempt to dredge leadership and systems theory literature to find the meeting point. Systems approach is not an approach to leadership in terms of a manner of leader’s work, but it’s the leader's determination to factorize in his leadership the external environment and relationships with and among elements. Leader without followers is unable to exercise his leadership and to ensure their conviction he should provide a system, a structure, a purpose, despite the alternative chaos. Systems approach clarifies the thought on the complexity and dynamism of the environment and provides a framework for building ideas. If the general system theory is the skeleton of science (Boulding: 1956, this article aims to replenish it with leadership muscles by prominent authors who have written on systems theory and leadership, as well as through original ideas. In this work analytical methods were used (by analyzing approaches individually as well as synthetic methods (by assaying individual approaches in context of entirety. The work is a critical review of literature as well as a deductive analysis mingled with models proposed by authors through inductive analysis. Meta-analysis has been used to dissect the interaction and interdependence between leadership approaches.

  9. A distribution management system

    Energy Technology Data Exchange (ETDEWEB)

    Verho, P.; Jaerventausta, P.; Kaerenlampi, M.; Paulasaari, H. [Tampere Univ. of Technology (Finland); Partanen, J. [Lappeenranta Univ. of Technology (Finland)

    1996-12-31

    The development of new distribution automation applications is considerably wide nowadays. One of the most interesting areas is the development of a distribution management system (DMS) as an expansion of the traditional SCADA system. At the power transmission level such a system is called an energy management system (EMS). The idea of these expansions is to provide supporting tools for control center operators in system analysis and operation planning. The needed data for new applications is mainly available in some existing systems. Thus the computer systems of utilities must be integrated. The main data source for the new applications in the control center are the AM/FM/GIS (i.e. the network database system), the SCADA, and the customer information system (CIS). The new functions can be embedded in some existing computer system. This means a strong dependency on the vendor of the existing system. An alternative strategy is to develop an independent system which is integrated with other computer systems using well-defined interfaces. The latter approach makes it possible to use the new applications in various computer environments, having only a weak dependency on the vendors of the other systems. In the research project this alternative is preferred and used in developing an independent distribution management system

  10. A System of Systems Approach to the EU Energy System

    Science.gov (United States)

    Jess, Tom; Madani, Kaveh; Mahlooji, Maral; Ristic, Bora

    2016-04-01

    Around the world, measures to prevent dangerous climate change are being adopted and may change energy systems fundamentally. The European Union (EU) is committed to reducing greenhouse gas emission by 20% by 2020 and by 80-95% by 2050. In order to achieve this, EU member states aim to increase the share of renewables in the energy mix to 20% by 2020. This commitment comes as part of a series of other aims, principles, and policies to reform the EU's energy system. Cost-efficiency in the emissions reductions measures as well as strategic goals under the Resource Efficient Europe flagship initiative which would include a more prudent approach to other natural resources such as water and land. Using the "System of Systems Approach", as from Hadian and Madani (2015), energy sources' Relative Aggregate Footprints (RAF) in the EU are evaluated. RAF aggregates across four criteria: carbon footprint, water footprint, land footprint, and economic cost. The four criteria are weighted by resource availability across the EU and for each Member State. This provides an evaluation of the overall resource use efficiency of the EU's energy portfolio and gives insight into the differences in the desirability of energy sources across Member States. Broadly, nuclear, onshore wind, and geothermal are most desirable under equal criteria weights and EU average weighting introduces only small changes in the relative performance of only few technologies. The member state specific weightings show that most countries have similar energy technology preferences. However, the UK deviates most strongly from the average, with an even stronger preference for nuclear and coal. Sweden, Malta and Finland also deviate from the typical preferences indicating the complexity in play in reforming the EU energy system. Reference Hadian S, Madani K (2015) A System of Systems Approach to Energy Sustainability Assessment: Are All Renewables Really Green? Ecological Indicators, 52, 194-206.

  11. Intelligent systems technology infrastructure for integrated systems

    Science.gov (United States)

    Lum, Henry

    1991-01-01

    A system infrastructure must be properly designed and integrated from the conceptual development phase to accommodate evolutionary intelligent technologies. Several technology development activities were identified that may have application to rendezvous and capture systems. Optical correlators in conjunction with fuzzy logic control might be used for the identification, tracking, and capture of either cooperative or non-cooperative targets without the intensive computational requirements associated with vision processing. A hybrid digital/analog system was developed and tested with a robotic arm. An aircraft refueling application demonstration is planned within two years. Initially this demonstration will be ground based with a follow-on air based demonstration. System dependability measurement and modeling techniques are being developed for fault management applications. This involves usage of incremental solution/evaluation techniques and modularized systems to facilitate reuse and to take advantage of natural partitions in system models. Though not yet commercially available and currently subject to accuracy limitations, technology is being developed to perform optical matrix operations to enhance computational speed. Optical terrain recognition using camera image sequencing processed with optical correlators is being developed to determine position and velocity in support of lander guidance. The system is planned for testing in conjunction with Dryden Flight Research Facility. Advanced architecture technology is defining open architecture design constraints, test bed concepts (processors, multiple hardware/software and multi-dimensional user support, knowledge/tool sharing infrastructure), and software engineering interface issues.

  12. Modeling Power Systems as Complex Adaptive Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chassin, David P.; Malard, Joel M.; Posse, Christian; Gangopadhyaya, Asim; Lu, Ning; Katipamula, Srinivas; Mallow, J V.

    2004-12-30

    Physical analogs have shown considerable promise for understanding the behavior of complex adaptive systems, including macroeconomics, biological systems, social networks, and electric power markets. Many of today's most challenging technical and policy questions can be reduced to a distributed economic control problem. Indeed, economically based control of large-scale systems is founded on the conjecture that the price-based regulation (e.g., auctions, markets) results in an optimal allocation of resources and emergent optimal system control. This report explores the state-of-the-art physical analogs for understanding the behavior of some econophysical systems and deriving stable and robust control strategies for using them. We review and discuss applications of some analytic methods based on a thermodynamic metaphor, according to which the interplay between system entropy and conservation laws gives rise to intuitive and governing global properties of complex systems that cannot be otherwise understood. We apply these methods to the question of how power markets can be expected to behave under a variety of conditions.

  13. Rover waste assay system

    Energy Technology Data Exchange (ETDEWEB)

    Akers, D.W.; Stoots, C.M.; Kraft, N.C.; Marts, D.J. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1997-11-01

    The Rover Waste Assay System (RWAS) is a nondestructive assay system designed for the rapid assay of highly-enriched {sup 235}U contaminated piping, tank sections, and debris from the Rover nuclear rocket fuel processing facility at the Idaho Chemical Processing Plant. A scanning system translates a NaI(Tl) detector/collimator system over the structural components where both relative and calibrated measurements for {sup 137}Cs are made. Uranium-235 concentrations are in operation and is sufficiently automated that most functions are performed by the computer system. These functions include system calibration, problem identification, collimator control, data analysis, and reporting. Calibration of the system was done through a combination of measurements on calibration standards and benchmarked modeling. A description of the system is presented along with the methods and uncertainties associated with the calibration and analysis of the system for components from the Rover facility. 4 refs., 2 figs., 4 tabs.

  14. Enhanced nurse call systems.

    Science.gov (United States)

    2001-04-01

    This Evaluation focuses on high-end computerized nurse call systems--what we call enhanced systems. These are highly flexible systems that incorporate microprocessor and communications technologies to expand the capabilities of the nurse call function. Enhanced systems, which vary in configuration from one installation to the next, typically consist of a basic system that provides standard nurse call functionality and a combination of additional enhancements that provide the added functionality the facility desires. In this study, we examine the features that distinguish enhanced nurse call systems from nonenhanced systems, focusing on their application and benefit to healthcare facilities. We evaluated seven systems to determine how well they help (1) improve patient care, as well as increase satisfaction with the care provided, and (2) improve caregiver efficiency, as well as increase satisfaction with the work environment. We found that all systems meet these objectives, but not all systems perform equally well for all implementations. Our ratings will help facilities identify those systems that offer the most effective features for their intended use. The study also includes a Technology Management Guide to help readers (1) determine whether they'll benefit from the capabilities offered by enhanced systems and (2) target a system for purchase and equip the system for optimum performance and cost-effective operation.

  15. Nonlinearity of colloid systems oxyhydrate systems

    CERN Document Server

    Sucharev, Yuri I

    2008-01-01

    The present monograph is the first systematic study of the non-linear characteristic of gel oxy-hydrate systems involving d- and f- elements. These are the oxyhydrates of rare-earth elements and oxides - hydroxides of d- elements (zirconium, niobium, titanium, etc.) The non-linearity of these gel systems introduces fundamental peculiarities into their structure and, consequently, their properties. The polymer-conformational diversity of energetically congenial gel fragments, which continu-ously transform under the effect of, for instance, system dissipation heat, is central to the au-thor's hy

  16. Embedded systems handbook networked embedded systems

    CERN Document Server

    Zurawski, Richard

    2009-01-01

    Considered a standard industry resource, the Embedded Systems Handbook provided researchers and technicians with the authoritative information needed to launch a wealth of diverse applications, including those in automotive electronics, industrial automated systems, and building automation and control. Now a new resource is required to report on current developments and provide a technical reference for those looking to move the field forward yet again. Divided into two volumes to accommodate this growth, the Embedded Systems Handbook, Second Edition presents a comprehensive view on this area

  17. Smart SDHW systems

    DEFF Research Database (Denmark)

    Andersen, Elsa

    2000-01-01

    The aim of the project is to develop smart solar domestic hot water (SDHW) systems. A smart SDHW is a system in which the domestic water can bee heated both by solar collectors and by an auxiliary energy supply system. The auxiliary energy supply system heats up the hot-water tank from the top...... periods in a laboratory. Numeric models of the systems have been developed. The models are verified with measured temperatures and energy quantities. In order to verify the good test results in the laboratory two of the smart SDHW systems have been installed in practice. Measurements will bee carried out...

  18. Microelectronic systems 1 checkbook

    CERN Document Server

    Vears, R E

    2013-01-01

    Microelectronic Systems 1 Checkbook provides coverage of the Business and Technician Education Council level 1 unit in Microelectronic Systems. However, it can be regarded as a basic textbook in microelectronic systems for a much wider range of studies. Each topic considered in the text is presented in a way that assumes the reader has little prior knowledge of electronics. The aim of the book is to provide an introduction to the concept of systems, to differentiate analogue and digital systems, and to describe the nature of microprocessor-controlled systems. An introduction to programming is

  19. Introducing Systems Approaches

    Science.gov (United States)

    Reynolds, Martin; Holwell, Sue

    Systems Approaches to Managing Change brings together five systems approaches to managing complex issues, each having a proven track record of over 25 years. The five approaches are: System Dynamics (SD) developed originally in the late 1950s by Jay Forrester Viable Systems Model (VSM) developed originally in the late 1960s by Stafford Beer Strategic Options Development and Analysis (SODA: with cognitive mapping) developed originally in the 1970s by Colin Eden Soft Systems Methodology (SSM) developed originally in the 1970s by Peter Checkland Critical Systems Heuristics (CSH) developed originally in the late 1970s by Werner Ulrich

  20. Micro Information Systems

    DEFF Research Database (Denmark)

    Ulslev Pedersen, Rasmus; Kühn Pedersen, Mogens

    2014-01-01

    We are increasingly surrounded by and using small systems, which are equipped with sensors. Mobile phones, temperature sensors, GPS tracking, emerging nano/micro-size sensors, and similar technologies are used by individuals, groups, and organizations. There are valuable applications for industries...... such as medical and manufacturing. These new sensor applications have implications for information systems (IS) and, the authors visualize this new class of information systems as fractals growing from an established class of systems; namely that of information systems (IS). The identified applications....... The chapter demonstrates the proposed micro-IS framework with a working (open source) application of open demand response systems that address the engineering aspects of this work....

  1. Continuous system modeling

    Science.gov (United States)

    Cellier, Francois E.

    1991-01-01

    A comprehensive and systematic introduction is presented for the concepts associated with 'modeling', involving the transition from a physical system down to an abstract description of that system in the form of a set of differential and/or difference equations, and basing its treatment of modeling on the mathematics of dynamical systems. Attention is given to the principles of passive electrical circuit modeling, planar mechanical systems modeling, hierarchical modular modeling of continuous systems, and bond-graph modeling. Also discussed are modeling in equilibrium thermodynamics, population dynamics, and system dynamics, inductive reasoning, artificial neural networks, and automated model synthesis.

  2. Generalized L systems

    Institute of Scientific and Technical Information of China (English)

    陆汝钤; 张文妍

    2002-01-01

    This paper proposes the concept of generalized L systems, GL systems for short, which can describe asynchronized concurrent phenomena. We have proved that the GL systems are proper extensions of the traditional L systems. We have also defined a classification of GL systems and proved a sufficient and necessary condition for the equivalence of two subclasses of GL systems: two quivalent, iff k = j and there exists a common divisor g of all mr and a common divisor h of all ni such that i: mi/g = ni/h.

  3. Information system development activities and inquiring systems

    DEFF Research Database (Denmark)

    Carugati, Andrea

    2008-01-01

    This article presents a framework that maps information system development (ISD) activities on systems for the creation of knowledge. This work addresses the relevant and persisting problem of improving the chances of ISD success. The article builds upon previous research on knowledge aspects...... provides a new way to see the development of a system in terms of the knowledge created in the process. The main practical implication of the framework is that it improves the managers' ability to guide ISD activities as knowledge activities embedded in a knowledge process, a crucial element in development...... of ISD, abandoning the idea of a monolithic approach to knowledge and presenting a pluralistic approach based on the idea that different inquiring systems can support micro-level ISD activities. The article is divided into two parts. The first part presents the theoretical development of the framework...

  4. Test System Impact on System Availability

    DEFF Research Database (Denmark)

    Pau, L. F.

    1987-01-01

    The specifications are presented for an imperfect automatic test system (ATS) (test frequency distribution, reliability, false alarm rate, nondetection rate) in order to account for the availability, readiness, mean time between unscheduled repairs (MTBUR), reliability, and maintenance of the sys......The specifications are presented for an imperfect automatic test system (ATS) (test frequency distribution, reliability, false alarm rate, nondetection rate) in order to account for the availability, readiness, mean time between unscheduled repairs (MTBUR), reliability, and maintenance...... of the system subject to monitoring and test. A time-dependent Markov model is presented, and applied in three cases, with examples of numerical results provided for preventive maintenance decisions, design of an automatic test system, buffer testing in computers, and data communications....

  5. Business System Planning Project System Requirements Specification

    Energy Technology Data Exchange (ETDEWEB)

    NELSON, R.E.

    2000-09-08

    The purpose of the Business Systems Planning Project System Requirements Specification (SRS) is to provide the outline and contents of the requirements for the CH2M HILL Hanford Group, Inc. (CHG) integrated business and technical information systems. The SRS will translate proposed objectives into the statement of the functions that are to be performed and data and information flows that they require. The requirements gathering methodology will use (1) facilitated group requirement sessions; (2) individual interviews; (3) surveys; and (4) document reviews. The requirements will be verified and validated through coordination of the technical requirement team and CHG Managers. The SRS document used the content and format specified in Lockheed Martin Services, Inc. Organization Standard Software Practices in conjunction with the Institute of Electrical and Electronics Engineers Standard 8340-1984 for Systems Requirements Documents.

  6. SUBSURFACE EMPLACEMENT TRANSPORTATION SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    T. Wilson; R. Novotny

    1999-11-22

    The objective of this analysis is to identify issues and criteria that apply to the design of the Subsurface Emplacement Transportation System (SET). The SET consists of the track used by the waste package handling equipment, the conductors and related equipment used to supply electrical power to that equipment, and the instrumentation and controls used to monitor and operate those track and power supply systems. Major considerations of this analysis include: (1) Operational life of the SET; (2) Geometric constraints on the track layout; (3) Operating loads on the track; (4) Environmentally induced loads on the track; (5) Power supply (electrification) requirements; and (6) Instrumentation and control requirements. This analysis will provide the basis for development of the system description document (SDD) for the SET. This analysis also defines the interfaces that need to be considered in the design of the SET. These interfaces include, but are not limited to, the following: (1) Waste handling building; (2) Monitored Geologic Repository (MGR) surface site layout; (3) Waste Emplacement System (WES); (4) Waste Retrieval System (WRS); (5) Ground Control System (GCS); (6) Ex-Container System (XCS); (7) Subsurface Electrical Distribution System (SED); (8) MGR Operations Monitoring and Control System (OMC); (9) Subsurface Facility System (SFS); (10) Subsurface Fire Protection System (SFR); (11) Performance Confirmation Emplacement Drift Monitoring System (PCM); and (12) Backfill Emplacement System (BES).

  7. System Information Distribution in Massive MIMO Systems

    OpenAIRE

    Sörman, Simon

    2016-01-01

    The 5th generation mobile telecommunication system (5G) is currently being specified and developed, with large expectations on throughput and efficiency. While 4G and more specifically LTE might constitute a basis of the design of the network, there are some parts that should be improved. One thing to improve is the static signalling that occurs very frequently in a 4G network, of which system information such as synchronization signals, detection of network frequencies, operators, configurat...

  8. Mathematical System Theory and System Modeling

    OpenAIRE

    1980-01-01

    Choosing models related effectively to the questions to be addressed is a central issue in the craft of systems analysis. Since the mathematical description the analyst chooses constrains the types of issues he candeal with, it is important for these models to be selected so as to yield limitations that are acceptable in view of the questions the systems analysis seeks to answer. In this paper, the author gives an overview of the central issues affecting the question of model choice. To ...

  9. EPICS system: system structure and user interface

    Energy Technology Data Exchange (ETDEWEB)

    West, R.E.; Bartlett, J.F.; Bobbitt, J.S.; Lahey, T.E.; Kramper, B.J.; MacKinnon, B.A.

    1984-02-01

    This paper present the user's view of and the general organization of the EPICS control system at Fermilab. Various subsystems of the EPICS control system are discussed. These include the user command language, software protection, the device database, remote computer interfaces, and several application utilities. This paper is related to two other papers on EPICS: an overview paper and a detailed implementation paper.

  10. Operating System for Runtime Reconfigurable Multiprocessor Systems

    Directory of Open Access Journals (Sweden)

    Diana Göhringer

    2011-01-01

    Full Text Available Operating systems traditionally handle the task scheduling of one or more application instances on processor-like hardware architectures. RAMPSoC, a novel runtime adaptive multiprocessor System-on-Chip, exploits the dynamic reconfiguration on FPGAs to generate, start and terminate hardware and software tasks. The hardware tasks have to be transferred to the reconfigurable hardware via a configuration access port. The software tasks can be loaded into the local memory of the respective IP core either via the configuration access port or via the on-chip communication infrastructure (e.g. a Network-on-Chip. Recent-series of Xilinx FPGAs, such as Virtex-5, provide two Internal Configuration Access Ports, which cannot be accessed simultaneously. To prevent conflicts, the access to these ports as well as the hardware resource management needs to be controlled, e.g. by a special-purpose operating system running on an embedded processor. For that purpose and to handle the relations between temporally and spatially scheduled operations, the novel approach of an operating system is of high importance. This special purpose operating system, called CAP-OS (Configuration Access Port-Operating System, which will be presented in this paper, supports the clients using the configuration port with the services of priority-based access scheduling, hardware task mapping and resource management.

  11. Integrated Reporting Information System -

    Data.gov (United States)

    Department of Transportation — The Integrated Reporting Information System (IRIS) is a flexible and scalable web-based system that supports post operational analysis and evaluation of the National...

  12. VT DSL Systems 2006

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VT DSL Broadband System dataset (DSL2006) includes polygons depicting the extent of Vermont's DSL broadband system as of 12/31/2006. This data...

  13. Inductive Monitoring System (IMS)

    Data.gov (United States)

    National Aeronautics and Space Administration — IMS: Inductive Monitoring System The Inductive Monitoring System (IMS) is a tool that uses a data mining technique called clustering to extract models of normal...

  14. Interstitial hydrogen storage system

    Energy Technology Data Exchange (ETDEWEB)

    Gell, H.A.

    1980-09-30

    A metal hydride fuel system is described that incorporates a plurality of storage elements that may be individually replaced to provide a hydrogen fuel system for combustion engines having a capability of partial refueling is presented.

  15. Geographical information systems

    DEFF Research Database (Denmark)

    Möller, Bernd

    2004-01-01

    The chapter gives an introduction to Geographical Information Systems (GIS) with particular focus on their application within environmental management.......The chapter gives an introduction to Geographical Information Systems (GIS) with particular focus on their application within environmental management....

  16. Voluntary Service System (VSS)

    Data.gov (United States)

    Department of Veterans Affairs — Voluntary Service System (VSS) is a national-level application which replaced the site-based Voluntary Timekeeping System (VTK). VTK was used for many years at the...

  17. Semiotic labelled deductive systems

    Energy Technology Data Exchange (ETDEWEB)

    Nossum, R.T. [Imperial College of Science, Technology and Medicine, London (United Kingdom)

    1996-12-31

    We review the class of Semiotic Models put forward by Pospelov, as well as the Labelled Deductive Systems developed by Gabbay, and construct an embedding of Semiotic Models into Labelled Deductive Systems.

  18. Flight Systems Monitor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I project will develop the Flight System Monitor which will use non-intrusive electrical monitoring (NEMO). The electronic system health of...

  19. Generalized adjoint systems

    CERN Document Server

    Serakos, Demetrios

    2015-01-01

    This book defines and develops the generalized adjoint of an input-output system. It is the result of a theoretical development and examination of the generalized adjoint concept and the conditions under which systems analysis using adjoints is valid. Results developed in this book are useful aids for the analysis and modeling of physical systems, including the development of guidance and control algorithms and in developing simulations. The generalized adjoint system is defined and is patterned similarly to adjoints of bounded linear transformations. Next the elementary properties of the generalized adjoint system are derived. For a space of input-output systems, a generalized adjoint map from this space of systems to the space of generalized adjoints is defined. Then properties of the generalized adjoint map are derived. Afterward the author demonstrates that the inverse of an input-output system may be represented in terms of the generalized adjoint. The use of generalized adjoints to determine bounds for ...

  20. Systemic banking crises

    OpenAIRE

    O. Emre Ergungor; James B. Thomson

    2005-01-01

    Systemic banking crises can have devastating effects on the economies of developing or industrialized countries. This Policy Discussion Paper reviews the factors that weaken banking systems and make them more susceptible to crises.

  1. Silver recovery system data

    Energy Technology Data Exchange (ETDEWEB)

    Boulineau, B.

    1991-08-26

    In August of 1990 the Savannah River Site Photography Group began testing on a different type of silver recovery system. This paper describes the baseline study and the different phases of installation and testing of the system.

  2. Prosthetic Knee Systems

    Science.gov (United States)

    ... us Digg Facebook Google Bookmarks Technorati Yahoo MyWeb Prosthetic Knee Systems Translated into plain language by Helen ... Health Literacy Consulting Original article by Bill Dupes Prosthetic knee systems are among the most complex of ...

  3. Human Resource Accounting System

    Science.gov (United States)

    Cerullo, Michael J.

    1974-01-01

    Main objectives of human resource accounting systems are to satisfy the informational demands made by investors and by operating managers. The paper's main concern is with the internal uses of a human asset system. (Author)

  4. Saturated Switching Systems

    CERN Document Server

    Benzaouia, Abdellah

    2012-01-01

    Saturated Switching Systems treats the problem of actuator saturation, inherent in all dynamical systems by using two approaches: positive invariance in which the controller is designed to work within a region of non-saturating linear behaviour; and saturation technique which allows saturation but guarantees asymptotic stability. The results obtained are extended from the linear systems in which they were first developed to switching systems with uncertainties, 2D switching systems, switching systems with Markovian jumping and switching systems of the Takagi-Sugeno type. The text represents a thoroughly referenced distillation of results obtained in this field during the last decade. The selected tool for analysis and design of stabilizing controllers is based on multiple Lyapunov functions and linear matrix inequalities. All the results are illustrated with numerical examples and figures many of them being modelled using MATLAB®. Saturated Switching Systems will be of interest to academic researchers in con...

  5. Information retrieval system

    Science.gov (United States)

    Berg, R. F.; Holcomb, J. E.; Kelroy, E. A.; Levine, D. A.; Mee, C., III

    1970-01-01

    Generalized information storage and retrieval system capable of generating and maintaining a file, gathering statistics, sorting output, and generating final reports for output is reviewed. File generation and file maintenance programs written for the system are general purpose routines.

  6. Rainfed intensive crop systems

    DEFF Research Database (Denmark)

    Olesen, Jørgen E

    2014-01-01

    This chapter focuses on the importance of intensive cropping systems in contributing to the world supply of food and feed. The impact of climate change on intensive crop production systems is also discussed....

  7. BioSystems

    Data.gov (United States)

    U.S. Department of Health & Human Services — The NCBI BioSystems Database provides integrated access to biological systems and their component genes, proteins, and small molecules, as well as literature...

  8. Designing automatic resupply systems.

    Science.gov (United States)

    Harding, M L

    1999-02-01

    This article outlines the process for designing and implementing autoresupply systems. The planning process includes determination of goals and appropriate participation. Different types of autoresupply mechanisms include kanban, breadman, consignment, systems contracts, and direct shipping from an MRP schedule.

  9. Visitor Registration System

    Data.gov (United States)

    US Agency for International Development — Visitor Registration System (VRS) streamlines visitor check-in and check-out process for expediting visitors into USAID. The system captures visitor information...

  10. Central nervous system

    Science.gov (United States)

    The central nervous system is composed of the brain and spinal cord. Your brain and spinal cord serve as the main "processing center" for your entire nervous system. They control all the workings of your body.

  11. Multiple System Atrophy (MSA)

    Science.gov (United States)

    Diseases and Conditions Multiple system atrophy (MSA) By Mayo Clinic Staff Multiple system atrophy (MSA) is a rare neurological disorder that impairs your body's involuntary (autonomic) functions, including blood ...

  12. Health System Measurement Project

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Health System Measurement Project tracks government data on critical U.S. health system indicators. The website presents national trend data as well as detailed...

  13. Immune System and Disorders

    Science.gov (United States)

    Your immune system is a complex network of cells, tissues, and organs that work together to defend against germs. It ... t, to find and destroy them. If your immune system cannot do its job, the results can be ...

  14. Cross Disciplinary Biometric Systems

    CERN Document Server

    Liu, Chengjun

    2012-01-01

    Cross disciplinary biometric systems help boost the performance of the conventional systems. Not only is the recognition accuracy significantly improved, but also the robustness of the systems is greatly enhanced in the challenging environments, such as varying illumination conditions. By leveraging the cross disciplinary technologies, face recognition systems, fingerprint recognition systems, iris recognition systems, as well as image search systems all benefit in terms of recognition performance.  Take face recognition for an example, which is not only the most natural way human beings recognize the identity of each other, but also the least privacy-intrusive means because people show their face publicly every day. Face recognition systems display superb performance when they capitalize on the innovative ideas across color science, mathematics, and computer science (e.g., pattern recognition, machine learning, and image processing). The novel ideas lead to the development of new color models and effective ...

  15. Audit Management System

    CERN Document Server

    Alconada, Federico

    2015-01-01

    In the need of renewing their system, the Internal Audit department has given a proposal for building a new one. Taking into consideration the problems of their system they elaborated a requirement's list with the functionalities and features they were expecting from the new management system. This new system would be primarily for the use of the Internal Audit staff but it would also support the follow-up of internal audit recommendations by potentially all CERN staff members.

  16. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Ronkko, Mauno; Ravn, Anders P.

    1997-01-01

    a differential action, which allows differential equations as primitive actions. The extension allows us to model hybrid systems with both continuous and discrete behaviour. The main result of this paper is an extension of such a hybrid action system with parallel composition. The extension does not change...... the original meaning of the parallel composition, and therefore also the ordinary action systems can be composed in parallel with the hybrid action systems....

  17. Wireless power transfer system

    OpenAIRE

    Arai, Hiroyuki

    2012-01-01

    This paper presents a survey of recent wireless power transfer systems. The issue of wireless power transfer is to achieve a highly efficient system with small positioning errors of the facilities setting. Several theories have been presented to obtain precise system design. This paper presents a summary of design theory for short range power transfer systems and detailed formulations based on a circuit model and an array of infinitesimal dipoles. In addition to these theories, this paper in...

  18. The DISCUS Hardware System,

    Science.gov (United States)

    1982-07-01

    it physically impossible for one processor to access another’s local program or workspace. It should be noted that the system - generator should handle...this gateway would be complex and how it would be used and linked to the system generator would also be difficult. Because of this it worth asking...which is by no means trivial to write, identified several faults in the system generator and operating system that would have otherwise been

  19. Unix operating system

    CERN Document Server

    Liu, Yukun; Guo, Liwei

    2011-01-01

    ""UNIX Operating System: The Development Tutorial via UNIX Kernel Services"" introduces the hierarchical structure, principles, applications, kernel, shells, development, and management of the UNIX operation systems multi-dimensionally and systematically. It clarifies the natural bond between physical UNIX implementation and general operating system and software engineering theories, and presents self-explanatory illustrations for readers to visualize and understand the obscure relationships and intangible processes in UNIX operating system. This book is intended for engineers and researchers

  20. Spacecraft Energy Storage Systems

    OpenAIRE

    Robinson, Wilf; Hanks, James; Spina, Len; Havenhill, Doug; Gisler, Gary; Ginter, Steve; Brault, Sharon

    1997-01-01

    Flywheel Energy Storage Systems represent an exciting alternative to traditional battery storage systems used to power satellites during periods of eclipse. The increasing demand for reliable communication and data access is driving explosive growth in the number of satellite systems being developed as well as their performance requirements. Power on orbit is the key to this performance, and batteries are becoming increasingly unattractive as an energy storage media. Flywheel systems offer ve...

  1. Computational Systems Chemical Biology

    OpenAIRE

    Oprea, Tudor I.; Elebeoba E. May; Leitão, Andrei; Tropsha, Alexander

    2011-01-01

    There is a critical need for improving the level of chemistry awareness in systems biology. The data and information related to modulation of genes and proteins by small molecules continue to accumulate at the same time as simulation tools in systems biology and whole body physiologically-based pharmacokinetics (PBPK) continue to evolve. We called this emerging area at the interface between chemical biology and systems biology systems chemical biology, SCB (Oprea et al., 2007).

  2. Linear system theory

    Science.gov (United States)

    Callier, Frank M.; Desoer, Charles A.

    1991-01-01

    The aim of this book is to provide a systematic and rigorous access to the main topics of linear state-space system theory in both the continuous-time case and the discrete-time case; and the I/O description of linear systems. The main thrusts of the work are the analysis of system descriptions and derivations of their properties, LQ-optimal control, state feedback and state estimation, and MIMO unity-feedback systems.

  3. CCD digital radiography system

    Science.gov (United States)

    Wang, Yi; Kang, Xi; Li, Yuanjing; Cheng, Jianping; Hou, Yafei; Han, Haiwei

    2009-07-01

    Amorphous silicon flat-panel detector is the mainstream used in digital radiography (DR) system. In latest years, scintillation screen coupled with CCD DR is becoming more popular in hospital. Compared with traditional amorphous silicon DR, CCD-DR has better spatial resolution and has little radiation damage. It is inexpensive and can be operated easily. In this paper, A kind of CCD based DR system is developed. We describe the construction of the system, the system performances and experiment results.

  4. Recovery Systems Design Guide

    Science.gov (United States)

    1978-12-01

    14 1.9 Gemini Paraglider Deployment ......................................... 14 1.10 Apollo Recovery System Deployment...45 to 15 g’s. The fied land landing by Paraglider and an ejection seat automatic sequencing system deployed the drogue back-up system as the means for... Paraglider system should not be higher altitudes and speeds. There was no reserve ready for early Gemini flights. The intention was to drogue parachute

  5. Electric Vehicle Propulsion System

    OpenAIRE

    2014-01-01

    Electric vehicles are being considered as one of the pillar of eco-friendly solutions to overcome the problem of global pollution and radiations due to greenhouse gases. Present thesis work reports the improvement in overall performance of the propulsion system of an electric vehicle by improving autonomy and torque-speed characteristic. Electric vehicle propulsion system consists of supply and traction system, and are coordinated by the monitoring & control system. Case of light electric veh...

  6. Computer system identification

    OpenAIRE

    Lesjak, Borut

    2008-01-01

    The concept of computer system identity in computer science bears just as much importance as does the identity of an individual in a human society. Nevertheless, the identity of a computer system is incomparably harder to determine, because there is no standard system of identification we could use and, moreover, a computer system during its life-time is quite indefinite, since all of its regular and necessary hardware and software upgrades soon make it almost unrecognizable: after a number o...

  7. Open quantum system identification

    CERN Document Server

    Schirmer, Sophie G; Zhou, Weiwei; Gong, Erling; Zhang, Ming

    2012-01-01

    Engineering quantum systems offers great opportunities both technologically and scientifically for communication, computation, and simulation. The construction and operation of large scale quantum information devices presents a grand challenge and a major issue is the effective control of coherent dynamics. This is often in the presence of decoherence which further complicates the task of determining the behaviour of the system. Here, we show how to determine open system Markovian dynamics of a quantum system with restricted initialisation and partial output state information.

  8. Quantum System Identification

    OpenAIRE

    Burgarth, Daniel; Yuasa, Kazuya

    2011-01-01

    The aim of quantum system identification is to estimate the ingredients inside a black box, in which some quantum-mechanical unitary process takes place, by just looking at its input-output behavior. Here we establish a basic and general framework for quantum system identification, that allows us to classify how much knowledge about the quantum system is attainable, in principle, from a given experimental setup. Prior knowledge on some elements of the black box helps the system identification...

  9. Space power systems technology

    Science.gov (United States)

    Coulman, George A.

    1994-01-01

    Reported here is a series of studies which examine several potential catalysts and electrodes for some fuel cell systems, some materials for space applications, and mathematical modeling and performance predictions for some solid oxide fuel cells and electrolyzers. The fuel cell systems have a potential for terrestrial applications in addition to solar energy conversion in space applications. Catalysts and electrodes for phosphoric acid fuel cell systems and for polymer electrolyte membrane (PEM) fuel cell and electrolyzer systems were examined.

  10. Content management systems (CMS)

    OpenAIRE

    Oriahi, Harrison

    2014-01-01

    This thesis describes the three most common and widely used content management systems (CMS) used to power several millions of business websites on the internet. Since there are many other content managements systems online, this report provides some helpful guides on each of the three most used systems and the web design projects that each of them maybe most suitable. There are plenty of options when it comes to selecting a content management system for a development project and this the...

  11. System programming languages

    OpenAIRE

    ŠMIT, MATEJ

    2016-01-01

    Most operating systems are written in the C programming language. Similar is with system software, for example, device drivers, compilers, debuggers, disk checkers, etc. Recently some new programming languages emerged, which are supposed to be suitable for system programming. In this thesis we present programming languages D, Go, Nim and Rust. We defined the criteria which are important for deciding whether programming language is suitable for system programming. We examine programming langua...

  12. Radiant Floor Cooling Systems

    DEFF Research Database (Denmark)

    Olesen, Bjarne W.

    2008-01-01

    In many countries, hydronic radiant floor systems are widely used for heating all types of buildings such as residential, churches, gymnasiums, hospitals, hangars, storage buildings, industrial buildings, and smaller offices. However, few systems are used for cooling.This article describes a floor...... cooling system that includes such considerations as thermal comfort of the occupants, which design parameters will influence the cooling capacity and how the system should be controlled. Examples of applications are presented....

  13. Logistics Management Information System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The logistics information is the logistics manageme nt 's inevitable request. The paper introduces several kinds of logistics informat ion system and their functions in the logistics management, such as the warehous e management system (WMS) in the delivery center, the control system for transpo rtation and delivery, the supply chain management (SCM), the optimization of th e logistics system, etc. In the author's opinion, the development of logistics could been divided into four phases. And the logistic...

  14. Compositional asynchronous membrane systems

    Institute of Scientific and Technical Information of China (English)

    Cosmin Bonchis; Cornel Izbasa; Gabriel Ciobanu

    2007-01-01

    This paper presents an algorithmic way of building complex membrane systems by coupling elementary membranes. Its application seems particularly valuable in the case of asynchronous membrane systems, since the resulting membrane system remains asynchronous. The composition method is based on a handshake mechanism implemented by using antiport rules and promoters.

  15. MILITARY INFORMATION SYSTEMS,

    Science.gov (United States)

    upward are usually indications of how effectively the system is developing or operating. The use of computers in information systems tends to increase...computers into information systems must always begin at the lowest level of aggregation in the job hierarchy. Only those information-processing jobs

  16. Solar tracking system

    Energy Technology Data Exchange (ETDEWEB)

    Okandan, Murat; Nielson, Gregory N.

    2016-07-12

    Solar tracking systems, as well as methods of using such solar tracking systems, are disclosed. More particularly, embodiments of the solar tracking systems include lateral supports horizontally positioned between uprights to support photovoltaic modules. The lateral supports may be raised and lowered along the uprights or translated to cause the photovoltaic modules to track the moving sun.

  17. Information extraction system

    Science.gov (United States)

    Lemmond, Tracy D; Hanley, William G; Guensche, Joseph Wendell; Perry, Nathan C; Nitao, John J; Kidwell, Paul Brandon; Boakye, Kofi Agyeman; Glaser, Ron E; Prenger, Ryan James

    2014-05-13

    An information extraction system and methods of operating the system are provided. In particular, an information extraction system for performing meta-extraction of named entities of people, organizations, and locations as well as relationships and events from text documents are described herein.

  18. System integration report

    Science.gov (United States)

    Badler, N. I.; Korein, J. D.; Meyer, C.; Manoochehri, K.; Rovins, J.; Beale, J.; Barr, B.

    1985-01-01

    Several areas that arise from the system integration issue were examined. Intersystem analysis is discussed as it relates to software development, shared data bases and interfaces between TEMPUS and PLAID, shaded graphics rendering systems, object design (BUILD), the TEMPUS animation system, anthropometric lab integration, ongoing TEMPUS support and maintenance, and the impact of UNIX and local workstations on the OSDS environment.

  19. Lofar information system design

    NARCIS (Netherlands)

    Valentijn, E.; Belikov, A. N.

    2009-01-01

    The Lofar Information System is a solution for Lofar Long Term Archive that is capable to store and handle PBs of raw and processed data. The newly created information system is based on Astro-WISE - the information system for wide field astronomy. We review an adaptation of Astro-WISE for the new t

  20. Development Expert System

    Institute of Scientific and Technical Information of China (English)

    CAI Heng

    2010-01-01

    The expert system is a high-level technology.It is a sub-field of artificial intelligence.We demonstrated the character and software evaluation,carrying out an initial study of expert system.A good development expert system was developed.

  1. Controllability of Quantum Systems

    CERN Document Server

    Schirmer, S G; Solomon, A I

    2003-01-01

    An overview and synthesis of results and criteria for open-loop controllability of Hamiltonian quantum systems obtained using Lie group and Lie algebra techniques is presented. Negative results for open-loop controllability of dissipative systems are discussed, and the superiority of closed-loop (feedback) control for quantum systems is established.

  2. LED system reliability

    NARCIS (Netherlands)

    Driel, W.D. van; Yuan, C.A.; Koh, S.; Zhang, G.Q.

    2011-01-01

    This paper presents our effort to predict the system reliability of Solid State Lighting (SSL) applications. A SSL system is composed of a LED engine with micro-electronic driver(s) that supplies power to the optic design. Knowledge of system level reliability is not only a challenging scientific ex

  3. Personal Food System Mapping

    Science.gov (United States)

    Wilsey, David; Dover, Sally

    2014-01-01

    Personal food system mapping is a practical means to engage community participants and educators in individualized and shared learning about food systems, decisions, and behaviors. Moreover, it is a useful approach for introducing the food system concept, which is somewhat abstract. We developed the approach to capture diversity of personal food…

  4. Endocrine System (For Parents)

    Science.gov (United States)

    ... of or replacing specific hormones can treat many endocrine disorders in children and adolescents, some of which include: ... System Your Child's Growth Female Reproductive System Activity: Endocrine System Word! Hormones Diabetes Center Thyroid Disorders Type 2 Diabetes: What Is It? Your Endocrine ...

  5. Control Oriented System Identification

    Science.gov (United States)

    1993-08-01

    The research goals for this grant were to obtain algorithms for control oriented system identification is to construct dynamical models of systems...and measured information. Algorithms for this type of nonlinear system identification have been given that produce models suitable for gain scheduled

  6. Building Community Knowledge Systems

    DEFF Research Database (Denmark)

    Bansler, Jørgen P.; Havn, Erling C.

    2003-01-01

    managers. We followed the system from its introduction in early 1997 until it was abandoned in the beginning of 2000. We focused on the way the system was introduced in the organization, how it changed, and how the intended group of users received (and eventually rejected) the system. Based on our...

  7. Medical Information Systems.

    Science.gov (United States)

    Smith, Kent A.

    1986-01-01

    Description of information services from the National Library of Medicine (NLM) highlights a new system for retrieving information from NLM's databases (GRATEFUL MED); a formal Regional Medical Library Network; DOCLINE; the Unified Medical Language System; and Integrated Academic Information Management Systems. Research and development and the…

  8. Controllability in nonlinear systems

    Science.gov (United States)

    Hirschorn, R. M.

    1975-01-01

    An explicit expression for the reachable set is obtained for a class of nonlinear systems. This class is described by a chain condition on the Lie algebra of vector fields associated with each nonlinear system. These ideas are used to obtain a generalization of a controllability result for linear systems in the case where multiplicative controls are present.

  9. The Quality System

    DEFF Research Database (Denmark)

    Brogaard Buus, Daniel; Eland, Morten Vestergaard; Lystlund, Rasmus

    2015-01-01

    In this article, we present our efforts to try to increase cohesiveness and connectivity between quests generated by a recreation of an existing procedural quest generation system, with an addition of a progressive tier system called Quality System. A study gave strong indications that the Quality...

  10. LOFAR Information System

    NARCIS (Netherlands)

    Begeman, K.; Belikov, A. N.; Boxhoorn, D. R.; Dijkstra, F.; Holties, H.; Meyer-Zhao, Z.; Renting, G. A.; Valentijn, E. A.; Vriend, W. -J.

    2011-01-01

    In this paper, we present a newly designed and implemented scientific information system for the LOFAR Long Term Archive. It is a distributed multi-tier storage and data processing system that allows a number of users to process Petabytes of data. The LOFAR Information System is designed on the base

  11. Imaging systems and applications.

    Science.gov (United States)

    Catrysse, Peter B; Imai, Francisco H; Linne von Berg, Dale C; Sheridan, John T

    2013-03-01

    Imaging systems have numerous applications in industrial, military, consumer, and medical settings. Assembling a complete imaging system requires the integration of optics, sensing, image processing, and display rendering. This issue features original research ranging from fundamental theories to novel imaging modalities and provides a systems perspective to imaging.

  12. Flexible energy systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    The paper discusses and analyses diffent national strategies and points out key changes in the energy system in order to achieve a system which can benefit from a high percentage of wind and CHP without having surplus production problems, introduced here as a flexible energy system....

  13. IDC System Specification Document.

    Energy Technology Data Exchange (ETDEWEB)

    Clifford, David J.

    2014-12-01

    This document contains the system specifications derived to satisfy the system requirements found in the IDC System Requirements Document for the IDC Reengineering Phase 2 project. Revisions Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Reengineering Project Team Initial delivery M. Harris

  14. Energy systems security

    CERN Document Server

    Voeller, John G

    2014-01-01

    Energy Systems Security features articles from the Wiley Handbook of Science and Technology for Homeland Security covering topics related to electricity transmission grids and their protection, risk assessment of energy systems, analysis of interdependent energy networks. Methods to manage electricity transmission disturbances so as to avoid blackouts are discussed, and self-healing energy system and a nano-enabled power source are presented.

  15. Types of Data Systems

    Science.gov (United States)

    Gould, Tate; Nicholas, Amy; Ruggiero, Tony; Blandford, William; Thayer, Sara; Bull, Bruce

    2015-01-01

    There are several types of data systems that support data from Part C/619 programs. Although the system types have similarities, each has its own unique characteristics and purposes. The attributes that make one type of data system a particularly good fit for one data-related need or function can be less desirable for another need or function. In…

  16. The complement system in systemic autoimmune disease.

    Science.gov (United States)

    Chen, Min; Daha, Mohamed R; Kallenberg, Cees G M

    2010-05-01

    Complement is part of the innate immune system. Its major function is recognition and elimination of pathogens via direct killing and/or stimulation of phagocytosis. Activation of the complement system is, however, also involved in the pathogenesis of the systemic autoimmune diseases. Activation via the classical pathway has long been recognized in immune complex-mediated diseases such as cryoglobulinemic vasculitis and systemic lupus erythematosus (SLE). In SLE, the role of complement is somewhat paradoxical. It is involved in autoantibody-initiated tissue damage on the one hand, but, on the other hand, it appears to have protective features as hereditary deficiencies of classical pathway components are associated with an increased risk for SLE. There is increasing evidence that the alternative pathway of complement, even more than the classical pathway, is involved in many systemic autoimmune diseases. This is true for IgA-dominant Henoch Schönlein Purpura, in which additional activation of the lectin pathway contributes to more severe disease. In anti-neutrophil cytoplasmic antibody (ANCA)-associated vasculitis the complement system was considered not to be involved since immunoglobulin deposition is generally absent in the lesions. However, recent studies, both in human and animal models, demonstrated complement activation via the alternative pathway as a major pathogenic mechanism. Insight into the role of the various pathways of complement in the systemic autoimmune diseases including the vasculitides opens up new ways of treatment by blocking effector pathways of complement. This has been demonstrated for monoclonal antibodies to C5 or C5a in experimental anti-phospholipid antibody syndrome and ANCA-associated vasculitis.

  17. Petascale system management experiences.

    Energy Technology Data Exchange (ETDEWEB)

    Desai, N.; Bradshaw, R.; Lueninghoener, C.; Cherry, A.; Coghlan, S.; Scullin, W. (LCF); ( MCS)

    2008-01-01

    Petascale High-Performance Computing (HPC) systems are among the largest systems in the world. Intrepid, one such system, is a 40,000 node, 556 teraflop Blue Gene/P system that has been deployed at Argonne National Laboratory. In this paper, we provide some background about the system and our administration experiences. In particular, due to the scale of the system, we have faced a variety of issues, some surprising to us, that are not common in the commodity world. We discuss our expectations, these issues, and approaches we have used to address them. HPC systems are a bellwether for computing systems at large, in multiple regards. HPC users are motivated by the need for absolute performance; this results in two important pushes. HPC users are frequently early adopters of new technologies and techniques. Successful technologies, like Infiniband, prove their value in HPC before gaining wider adoption. Unfortunately, this early adoption alone is not sufficient to achieve the levels of performance required by HPC users; parallelism must also be harnessed. Over the last 15 years, beowulf clustering has provided amazing accessibility to non-HPC-savvy and even non-technical audiences. During this time, substantial adoption of clustering has occurred in many market segments unrelated to computational science. A simple trend has emerged: the scale and performance of high-end HPC systems are uncommon at first, but become commonplace over the course of 3-5 years. For example, in early 2003, several systems on the Top500 list consisted of either 1024 nodes or 4096-8192 cores. In 2008, such systems are commonplace. The most recent generation of high-end HPC systems, so called petascale systems, are the culmination of years of research and development in research and academia. Three such systems have been deployed thus far. In addition to the 556 TF Intrepid system at Argonne National Laboratory, a 596 TF Blue Gene/L-based system has been deployed at Lawrence Livermore

  18. Power system relaying

    CERN Document Server

    Horowitz, Stanley H; Niemira, James K

    2013-01-01

    The previous three editions of Power System Relaying offer comprehensive and accessible coverage of the theory and fundamentals of relaying and have been widely adopted on university and industry courses worldwide. With the third edition, the authors have added new and detailed descriptions of power system phenomena such as stability, system-wide protection concepts and discussion of historic outages. Power System Relaying, 4th Edition continues its role as an outstanding textbook on power system protection for senior and graduate students in the field of electric power engineering and a refer

  19. Superconductor rotor cooling system

    Science.gov (United States)

    Gamble, Bruce B.; Sidi-Yekhlef, Ahmed; Schwall, Robert E.; Driscoll, David I.; Shoykhet, Boris A.

    2002-01-01

    A system for cooling a superconductor device includes a cryocooler located in a stationary reference frame and a closed circulation system external to the cryocooler. The closed circulation system interfaces the stationary reference frame with a rotating reference frame in which the superconductor device is located. A method of cooling a superconductor device includes locating a cryocooler in a stationary reference frame, and transferring heat from a superconductor device located in a rotating reference frame to the cryocooler through a closed circulation system external to the cryocooler. The closed circulation system interfaces the stationary reference frame with the rotating reference frame.

  20. Building Web Reputation Systems

    CERN Document Server

    Farmer, Randy

    2010-01-01

    What do Amazon's product reviews, eBay's feedback score system, Slashdot's Karma System, and Xbox Live's Achievements have in common? They're all examples of successful reputation systems that enable consumer websites to manage and present user contributions most effectively. This book shows you how to design and develop reputation systems for your own sites or web applications, written by experts who have designed web communities for Yahoo! and other prominent sites. Building Web Reputation Systems helps you ask the hard questions about these underlying mechanisms, and why they're critical

  1. Dynamical Systems Conference

    CERN Document Server

    Gils, S; Hoveijn, I; Takens, F; Nonlinear Dynamical Systems and Chaos

    1996-01-01

    Symmetries in dynamical systems, "KAM theory and other perturbation theories", "Infinite dimensional systems", "Time series analysis" and "Numerical continuation and bifurcation analysis" were the main topics of the December 1995 Dynamical Systems Conference held in Groningen in honour of Johann Bernoulli. They now form the core of this work which seeks to present the state of the art in various branches of the theory of dynamical systems. A number of articles have a survey character whereas others deal with recent results in current research. It contains interesting material for all members of the dynamical systems community, ranging from geometric and analytic aspects from a mathematical point of view to applications in various sciences.

  2. Benchmarking expert system tools

    Science.gov (United States)

    Riley, Gary

    1988-01-01

    As part of its evaluation of new technologies, the Artificial Intelligence Section of the Mission Planning and Analysis Div. at NASA-Johnson has made timing tests of several expert system building tools. Among the production systems tested were Automated Reasoning Tool, several versions of OPS5, and CLIPS (C Language Integrated Production System), an expert system builder developed by the AI section. Also included in the test were a Zetalisp version of the benchmark along with four versions of the benchmark written in Knowledge Engineering Environment, an object oriented, frame based expert system tool. The benchmarks used for testing are studied.

  3. A distribution management system

    Energy Technology Data Exchange (ETDEWEB)

    Jaerventausta, P.; Verho, P.; Kaerenlampi, M.; Pitkaenen, M. [Tampere Univ. of Technology (Finland); Partanen, J. [Lappeenranta Univ. of Technology (Finland)

    1998-08-01

    The development of new distribution automation applications is considerably wide nowadays. One of the most interesting areas is the development of a distribution management system (DMS) as an expansion to the traditional SCADA system. At the power transmission level such a system is called an energy management system (EMS). The idea of these expansions is to provide supporting tools for control center operators in system analysis and operation planning. Nowadays the SCADA is the main computer system (and often the only) in the control center. However, the information displayed by the SCADA is often inadequate, and several tasks cannot be solved by a conventional SCADA system. A need for new computer applications in control center arises from the insufficiency of the SCADA and some other trends. The latter means that the overall importance of the distribution networks is increasing. The slowing down of load-growth has often made network reinforcements unprofitable. Thus the existing network must be operated more efficiently. At the same time larger distribution areas are for economical reasons being monitored at one control center and the size of the operation staff is decreasing. The quality of supply requirements are also becoming stricter. The needed data for new applications is mainly available in some existing systems. Thus the computer systems of utilities must be integrated. The main data source for the new applications in the control center are the AM/FM/GIS (i.e. the network database system), the SCADA, and the customer information system (CIS). The new functions can be embedded in some existing computer system. This means a strong dependency on the vendor of the existing system. An alternative strategy is to develop an independent system which is integrated with other computer systems using well-defined interfaces. The latter approach makes it possible to use the new applications in various computer environments, having only a weak dependency on the

  4. Liver in systemic disease

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Potential causes of abnormal liver function tests include viral hepatitis, alcohol intake, nonalcoholic fatty liver disease, autoimmune liver diseases, hereditary diseases, hepatobiliary malignancies or infection, gallstones and drug-induced liver injury. Moreover, the liver may be involved in systemic diseases that mainly affect other organs. Therefore, in patients without etiology of liver injury by screening serology and diagnostic imaging, but who have systemic diseases, the abnormal liver function test results might be caused by the systemic disease. In most of these patients, the systemic disease should be treated primarily. However, some patients with systemic disease and severe liver injury or fulminant hepatic failure require intensive treatments of the liver.

  5. Power system state estimation

    CERN Document Server

    Ahmad, Mukhtar

    2012-01-01

    State estimation is one of the most important functions in power system operation and control. This area is concerned with the overall monitoring, control, and contingency evaluation of power systems. It is mainly aimed at providing a reliable estimate of system voltages. State estimator information flows to control centers, where critical decisions are made concerning power system design and operations. This valuable resource provides thorough coverage of this area, helping professionals overcome challenges involving system quality, reliability, security, stability, and economy.Engineers are

  6. Calculus for decision systems

    OpenAIRE

    Samayoa Ranero, Jorge Antonio

    2015-01-01

    The conceptualization of the term "system" has become highly dependent on the application domain. What a physicist means by the term system might be different than what a sociologist means by the same term. In 1956, Bertalanffy [1] defined a system as " a set of units with relationships among them". This and many other definitions of system share the idea of a system as a black box that has parts or elements interacting between each other. This means that at some level of abstraction all syst...

  7. Electric power systems

    CERN Document Server

    Weedy, B M; Jenkins, N; Ekanayake, J B; Strbac, G

    2012-01-01

    The definitive textbook for Power Systems students, providing a grounding in essential power system theory while also focusing on practical power engineering applications. Electric Power Systems has been an essential book in power systems engineering for over thirty years. Bringing the content firmly up-to-date whilst still retaining the flavour of Weedy's extremely popular original, this Fifth Edition has been revised by experts Nick Jenkins, Janaka Ekanayake and Goran Strbac. This wide-ranging text still covers all of the fundamental power systems subjects but is now e

  8. SNS Cryogenic Systems Commissioning

    Energy Technology Data Exchange (ETDEWEB)

    D. Hatfield; F. Casagrande; I. Campisi; P. Gurd; M. Howell; D. Stout; H. Strong; D. Arenius; J. Creel; K. Dixon; V. Ganni; and P. Knudsen

    2005-08-29

    The Spallation Neutron Source (SNS) is under construction at Oak Ridge National Laboratory. The cold section of the Linac consists of 81 superconducting radio frequency cavities cooled to 2.1K by a 2400 watt cryogenic refrigeration system. The major cryogenic system components include warm helium compressors with associated oil removal and gas management, 4.5K cold box, 7000L liquid helium dewar, 2.1K cold box (consisting of 4 stages of cold compressors), gaseous helium storage, helium purification and gas impurity monitoring system, liquid nitrogen storage and the cryogenic distribution transfer line system. The overall system commissioning and future plans will be presented.

  9. [Automated anesthesia record system].

    Science.gov (United States)

    Zhu, Tao; Liu, Jin

    2005-12-01

    Based on Client/Server architecture, a software of automated anesthesia record system running under Windows operation system and networks has been developed and programmed with Microsoft Visual C++ 6.0, Visual Basic 6.0 and SQL Server. The system can deal with patient's information throughout the anesthesia. It can collect and integrate the data from several kinds of medical equipment such as monitor, infusion pump and anesthesia machine automatically and real-time. After that, the system presents the anesthesia sheets automatically. The record system makes the anesthesia record more accurate and integral and can raise the anesthesiologist's working efficiency.

  10. Information systems project management

    CERN Document Server

    Olson, David

    2014-01-01

    Information Systems Project Management addresses project management in the context of information systems. It deals with general project management principles, with focus on the special characteristics of information systems. It is based on an earlier text, but shortened to focus on essential project management elements.This updated version presents various statistics indicating endemic problems in completing information system projects on time, within budget, at designed functionality. While successful completion of an information systems project is a challenge, there are some things that ca

  11. ALFA Detector Control System

    CERN Document Server

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS (A Toroidal LHC Apparatus). The ALFA system is composed by four stations installed in the LHC tunnel 240 m away from the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronics for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  12. SNS Cryogenic Systems Commissioning

    Science.gov (United States)

    Hatfield, D.; Casagrande, F.; Campisi, I.; Gurd, P.; Howell, M.; Stout, D.; Strong, H.; Arenius, D.; Creel, J.; Dixon, K.; Ganni, V.; Knudsen, P.

    2006-04-01

    The Spallation Neutron Source (SNS) is under construction at Oak Ridge National Laboratory. The cold section of the Linac consists of 81 superconducting radio frequency cavities cooled to 2.1K by a 2400 watt cryogenic refrigeration system. The major cryogenic system components include warm helium compressors with associated oil removal and gas management, 4.5K cold box, 7000L liquid helium dewar, 2.1K cold box (consisting of 4 stages of cold compressors), gaseous helium storage, helium purification and gas impurity monitoring system, liquid nitrogen storage and the cryogenic distribution transfer line system. The overall system commissioning and future plans will be presented.

  13. Intelligent Car System

    Directory of Open Access Journals (Sweden)

    Qasim Siddique

    2009-01-01

    Full Text Available In modern life the road safety has becomes the core issue. One single move of a driver can cause horrifying accident. The main goal of intelligent car system is to make communication with other cars on the road. The system is able to control to speed, direction and the distance between the cars the intelligent car system is able to recognize traffic light and is able to take decision according to it. This paper presents a framework of the intelligent car system. I validate several aspect of our system using simulation.

  14. Intelligent Car System

    CERN Document Server

    Siddique, Qasim

    2012-01-01

    In modern life the road safety has becomes the core issue. One single move of a driver can cause horrifying accident. The main goal of intelligent car system is to make communication with other cars on the road. The system is able to control to speed, direction and the distance between the cars the intelligent car system is able to recognize traffic light and is able to take decision according to it. This paper presents a framework of the intelligent car system. I validate several aspect of our system using simulation.

  15. CNEOST Control Software System

    Science.gov (United States)

    Wang, X.; Zhao, H. B.; Xia, Y.; Lu, H.; Li, B.

    2015-03-01

    In 2013, CNEOST (China Near Earth Object Survey Telescope) adapted its hardware system for the new CCD camera. Based on the new system architecture, the control software is re-designed and implemented. The software system adopts the message passing mechanism via WebSocket protocol, and improves its flexibility, expansibility, and scalability. The user interface with responsive web design realizes the remote operating under both desktop and mobile devices. The stable operating of software system has greatly enhanced the operation efficiency while reducing the complexity, and has also made a successful attempt for the future system design of telescope and telescope cloud.

  16. ALFA Detector Control System

    CERN Document Server

    Oleiro Seabra, Luis Filipe; The ATLAS collaboration

    2015-01-01

    ALFA (Absolute Luminosity For ATLAS) is one of the sub-detectors of ATLAS/LHC. The ALFA system is composed by two stations installed in the LHC tunnel 240 m away from each side of the ATLAS interaction point. Each station has a vacuum and ventilation system, movement control and all the required electronic for signal processing. The Detector Control System (DCS) provides control and monitoring of several components and ensures the safe operation of the detector contributing to good Data Quality. This paper describes the ALFA DCS system including a detector overview, operation aspects and hardware control through a SCADA system, WinCC OA.

  17. Leakage resilient password systems

    CERN Document Server

    Li, Yingjiu; Deng, Robert H

    2015-01-01

    This book investigates tradeoff between security and usability in designing leakage resilient password systems (LRP) and introduces two practical LRP systems named Cover Pad and ShadowKey. It demonstrates that existing LRP systems are subject to both brute force attacks and statistical attacks and that these attacks cannot be effectively mitigated without sacrificing the usability of LRP systems. Quantitative analysis proves that a secure LRP system in practical settings imposes a considerable amount of cognitive workload unless certain secure channels are involved. The book introduces a secur

  18. THERMAL DISTRIBUTION SYSTEM EXPERIMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRAJEWSKI,R.F.; ANDREWS,J.W.; WEI,G.

    1999-09-01

    A laboratory experiment has been conducted which tests for the effects of distribution system purging on system Delivery Effectiveness (DE) as defined in ASHRAE 152P. The experiment is described in its configuration, instrumentation, and data acquisition system. Data gathered in the experiment is given and discussed. The results show that purging of the distribution system alone does not offer any improvement of the system DE. Additional supporting tests were conducted regarding experimental simulations of buffer zones and bare pipe and are also discussed.

  19. SYSTEMS ENGINEERING RESEARCH

    Institute of Scientific and Technical Information of China (English)

    Abd-El-Kader SAHRAOUI; Dennis M. BUEDE; Andrew P. SAGE

    2008-01-01

    In this paper, we propose selected research topics that are believed central to progress and growth in the application of systems engineering (SE). As a professional activity, and as an intellectual activity, systems engineering has strong links to such associated disciplines as decision analysis, operation research, project management, quality management, and systems design. When focussing on systems engineering research, we should distinguish between subjects that are of systems engineering essence and others that more closely correspond to those that are more relevant for related disciplines.

  20. 2014 Runtime Systems Summit. Runtime Systems Report

    Energy Technology Data Exchange (ETDEWEB)

    Sarkar, Vivek [US Dept. of Energy, Washington, DC (United States); Budimlic, Zoran [US Dept. of Energy, Washington, DC (United States); Kulkani, Milind [US Dept. of Energy, Washington, DC (United States)

    2016-09-19

    This report summarizes runtime system challenges for exascale computing, that follow from the fundamental challenges for exascale systems that have been well studied in past reports, e.g., [6, 33, 34, 32, 24]. Some of the key exascale challenges that pertain to runtime systems include parallelism, energy efficiency, memory hierarchies, data movement, heterogeneous processors and memories, resilience, performance variability, dynamic resource allocation, performance portability, and interoperability with legacy code. In addition to summarizing these challenges, the report also outlines different approaches to addressing these significant challenges that have been pursued by research projects in the DOE-sponsored X-Stack and OS/R programs. Since there is often confusion as to what exactly the term “runtime system” refers to in the software stack, we include a section on taxonomy to clarify the terminology used by participants in these research projects. In addition, we include a section on deployment opportunities for vendors and government labs to build on the research results from these projects. Finally, this report is also intended to provide a framework for discussing future research and development investments for exascale runtime systems, and for clarifying the role of runtime systems in exascale software.

  1. Exploration EVA System

    Science.gov (United States)

    Kearney, Lara

    2004-01-01

    In January 2004, the President announced a new Vision for Space Exploration. NASA's Office of Exploration Systems has identified Extravehicular Activity (EVA) as a critical capability for supporting the Vision for Space Exploration. EVA is required for all phases of the Vision, both in-space and planetary. Supporting the human outside the protective environment of the vehicle or habitat and allow ing him/her to perform efficient and effective work requires an integrated EVA "System of systems." The EVA System includes EVA suits, airlocks, tools and mobility aids, and human rovers. At the core of the EVA System is the highly technical EVA suit, which is comprised mainly of a life support system and a pressure/environmental protection garment. The EVA suit, in essence, is a miniature spacecraft, which combines together many different sub-systems such as life support, power, communications, avionics, robotics, pressure systems and thermal systems, into a single autonomous unit. Development of a new EVA suit requires technology advancements similar to those required in the development of a new space vehicle. A majority of the technologies necessary to develop advanced EVA systems are currently at a low Technology Readiness Level of 1-3. This is particularly true for the long-pole technologies of the life support system.

  2. System level ESD protection

    CERN Document Server

    Vashchenko, Vladislav

    2014-01-01

    This book addresses key aspects of analog integrated circuits and systems design related to system level electrostatic discharge (ESD) protection.  It is an invaluable reference for anyone developing systems-on-chip (SoC) and systems-on-package (SoP), integrated with system-level ESD protection. The book focuses on both the design of semiconductor integrated circuit (IC) components with embedded, on-chip system level protection and IC-system co-design. The readers will be enabled to bring the system level ESD protection solutions to the level of integrated circuits, thereby reducing or completely eliminating the need for additional, discrete components on the printed circuit board (PCB) and meeting system-level ESD requirements. The authors take a systematic approach, based on IC-system ESD protection co-design. A detailed description of the available IC-level ESD testing methods is provided, together with a discussion of the correlation between IC-level and system-level ESD testing methods. The IC-level ESD...

  3. Active optical zoom system

    Science.gov (United States)

    Wick, David V.

    2005-12-20

    An active optical zoom system changes the magnification (or effective focal length) of an optical imaging system by utilizing two or more active optics in a conventional optical system. The system can create relatively large changes in system magnification with very small changes in the focal lengths of individual active elements by leveraging the optical power of the conventional optical elements (e.g., passive lenses and mirrors) surrounding the active optics. The active optics serve primarily as variable focal-length lenses or mirrors, although adding other aberrations enables increased utility. The active optics can either be LC SLMs, used in a transmissive optical zoom system, or DMs, used in a reflective optical zoom system. By appropriately designing the optical system, the variable focal-length lenses or mirrors can provide the flexibility necessary to change the overall system focal length (i.e., effective focal length), and therefore magnification, that is normally accomplished with mechanical motion in conventional zoom lenses. The active optics can provide additional flexibility by allowing magnification to occur anywhere within the FOV of the system, not just on-axis as in a conventional system.

  4. TPC magnet cryogenic system

    Energy Technology Data Exchange (ETDEWEB)

    Green, M.A.; Burns, W.A.; Taylor, J.D.; Van Slyke, H.W.

    1980-03-01

    The Time Projection Chamber (TPC) magnet at LBL and its compensation solenoids are adiabatically stable superconducting solenoid magnets. The cryogenic system developed for the TPC magnet is discussed. This system uses forced two-phase tubular cooling with the two cryogens in the system. The liquid helium and liquid nitrogen are delivered through the cooled load by forced tubular flow. The only reservoirs of liquid cryogen exist in the control dewar (for liquid helium) and the conditioner dewar (for liquid nitrogen). The operation o these systems during virtually all phases of system operation are described. Photographs and diagrams of various system components are shown, and cryogenic system data are presented in the following sections: (1) heat leaks into the TPC coil package and the compensation solenoids; (2) heat leaks to various components of the TPC magnet cryogenics system besides the magnets and control dewar; (3) the control dewar and its relationship to the rest of the system; (4) the conditioner system and its role in cooling down the TPC magnet; (5) gas-cooled electrical leads and charging losses; and (6) a summation of the liquid helium and liquid nitrogen requirements for the TPC superconducting magnet system.

  5. Space Nuclear Power Systems

    Science.gov (United States)

    Houts, Michael G.

    2012-01-01

    Fission power and propulsion systems can enable exciting space exploration missions. These include bases on the moon and Mars; and the exploration, development, and utilization of the solar system. In the near-term, fission surface power systems could provide abundant, constant, cost-effective power anywhere on the surface of the Moon or Mars, independent of available sunlight. Affordable access to Mars, the asteroid belt, or other destinations could be provided by nuclear thermal rockets. In the further term, high performance fission power supplies could enable both extremely high power levels on planetary surfaces and fission electric propulsion vehicles for rapid, efficient cargo and crew transfer. Advanced fission propulsion systems could eventually allow routine access to the entire solar system. Fission systems could also enable the utilization of resources within the solar system.

  6. Thermodynamics of Nonadditive Systems.

    Science.gov (United States)

    Latella, Ivan; Pérez-Madrid, Agustín; Campa, Alessandro; Casetti, Lapo; Ruffo, Stefano

    2015-06-12

    The usual formulation of thermodynamics is based on the additivity of macroscopic systems. However, there are numerous examples of macroscopic systems that are not additive, due to the long-range character of the interaction among the constituents. We present here an approach in which nonadditive systems can be described within a purely thermodynamics formalism. The basic concept is to consider a large ensemble of replicas of the system where the standard formulation of thermodynamics can be naturally applied and the properties of a single system can be consequently inferred. After presenting the approach, we show its implementation in systems where the interaction decays as 1/r(α) in the interparticle distance r, with α smaller than the embedding dimension d, and in the Thirring model for gravitational systems.

  7. Multisource energy system project

    Science.gov (United States)

    Dawson, R. W.; Cowan, R. A.

    1987-03-01

    The mission of this project is to investigate methods of providing uninterruptible power to Army communications and navigational facilities, many of which have limited access or are located in rugged terrain. Two alternatives are currently available for deploying terrestrial stand-alone power systems: (1) conventional electric systems powered by diesel fuel, propane, or natural gas, and (2) alternative power systems using renewable energy sources such as solar photovoltaics (PV) or wind turbines (WT). The increased cost of fuels for conventional systems and the high cost of energy storage for single-source renewable energy systems have created interest in the hybrid or multisource energy system. This report will provide a summary of the first and second interim reports, final test results, and a user's guide for software that will assist in applying and designing multi-source energy systems.

  8. System floorplanning optimization

    KAUST Repository

    Browning, David W.

    2013-01-10

    Notebook and Laptop Original Equipment Manufacturers (OEMs) place great emphasis on creating unique system designs to differentiate themselves in the mobile market. These systems are developed from the \\'outside in\\' with the focus on how the system is perceived by the end-user. As a consequence, very little consideration is given to the interconnections or power of the devices within the system with a mentality of \\'just make it fit\\'. In this paper we discuss the challenges of Notebook system design and the steps by which system floor-planning tools and algorithms can be used to provide an automated method to optimize this process to ensure all required components most optimally fit inside the Notebook system.

  9. MDT DCS Electronics System

    CERN Document Server

    Tsarouchas, Charilaos; Gazis, Evangelos; Tsipolitis, Georgios

    This note has the aim to present the Detector Control System for the Monitor- ing of the electronics values of MDT chambers in ATLAS experiment in CERN. This system is decided to be called in short ELTX. The principal task of DCS is to enable and ensure the coherent and safe oper- ation of the detector. The interaction of detector expers, users or shifters to the detector hardware is also done via DCS. This is the responsible system of moni- toring the operational parameters and the overall state of the detector, the alarm generation and handling, the connection of hardware values to databases and the interaction with the DAQ system. Through this thesis, one can see what ELTX system has to offer as a Detector Control System and in detail, what is the hardware to be controlled and monitored. Moreover it is presented the mainstream of central Atlas DCS concerning the active interfaces.ELTX is a system following these standards.

  10. Synchronization of chaotic systems.

    Science.gov (United States)

    Pecora, Louis M; Carroll, Thomas L

    2015-09-01

    We review some of the history and early work in the area of synchronization in chaotic systems. We start with our own discovery of the phenomenon, but go on to establish the historical timeline of this topic back to the earliest known paper. The topic of synchronization of chaotic systems has always been intriguing, since chaotic systems are known to resist synchronization because of their positive Lyapunov exponents. The convergence of the two systems to identical trajectories is a surprise. We show how people originally thought about this process and how the concept of synchronization changed over the years to a more geometric view using synchronization manifolds. We also show that building synchronizing systems leads naturally to engineering more complex systems whose constituents are chaotic, but which can be tuned to output various chaotic signals. We finally end up at a topic that is still in very active exploration today and that is synchronization of dynamical systems in networks of oscillators.

  11. Quantum system identification.

    Science.gov (United States)

    Burgarth, Daniel; Yuasa, Kazuya

    2012-02-24

    The aim of quantum system identification is to estimate the ingredients inside a black box, in which some quantum-mechanical unitary process takes place, by just looking at its input-output behavior. Here we establish a basic and general framework for quantum system identification, that allows us to classify how much knowledge about the quantum system is attainable, in principle, from a given experimental setup. We show that controllable closed quantum systems can be estimated up to unitary conjugation. Prior knowledge on some elements of the black box helps the system identification. We present an example in which a Bell measurement is more efficient to identify the system. When the topology of the system is known, the framework enables us to establish a general criterion for the estimability of the coupling constants in its Hamiltonian.

  12. Discrete Control Systems

    CERN Document Server

    Lee, Taeyoung; McClamroch, N Harris

    2007-01-01

    Discrete control systems, as considered here, refer to the control theory of discrete-time Lagrangian or Hamiltonian systems. These discrete-time models are based on a discrete variational principle, and are part of the broader field of geometric integration. Geometric integrators are numerical integration methods that preserve geometric properties of continuous systems, such as conservation of the symplectic form, momentum, and energy. They also guarantee that the discrete flow remains on the manifold on which the continuous system evolves, an important property in the case of rigid-body dynamics. In nonlinear control, one typically relies on differential geometric and dynamical systems techniques to prove properties such as stability, controllability, and optimality. More generally, the geometric structure of such systems plays a critical role in the nonlinear analysis of the corresponding control problems. Despite the critical role of geometry and mechanics in the analysis of nonlinear control systems, non...

  13. System floorplanning optimization

    KAUST Repository

    Browning, David W.

    2012-12-01

    Notebook and Laptop Original Equipment Manufacturers (OEMs) place great emphasis on creating unique system designs to differentiate themselves in the mobile market. These systems are developed from the \\'outside in\\' with the focus on how the system is perceived by the end-user. As a consequence, very little consideration is given to the interconnections or power of the devices within the system with a mentality of \\'just make it fit\\'. In this paper we discuss the challenges of Notebook system design and the steps by which system floor-planning tools and algorithms can be used to provide an automated method to optimize this process to ensure all required components most optimally fit inside the Notebook system. © 2012 IEEE.

  14. Ubiquitous Annotation Systems

    DEFF Research Database (Denmark)

    Hansen, Frank Allan

    2006-01-01

    Ubiquitous annotation systems allow users to annotate physical places, objects, and persons with digital information. Especially in the field of location based information systems much work has been done to implement adaptive and context-aware systems, but few efforts have focused on the general...... requirements for linking information to objects in both physical and digital space. This paper surveys annotation techniques from open hypermedia systems, Web based annotation systems, and mobile and augmented reality systems to illustrate different approaches to four central challenges ubiquitous annotation...... systems have to deal with: anchoring, structuring, presentation, and authoring. Through a number of examples each challenge is discussed and HyCon, a context-aware hypermedia framework developed at the University of Aarhus, Denmark, is used to illustrate an integrated approach to ubiquitous annotations...

  15. The ALHAMBRA photometric system

    CERN Document Server

    Villegas, T Aparicio; Cabrera-Cano, J; Moles, M; Benitez, N; Perea, J; del Olmo, A; Fernandez-Soto, A; Cristobal-Hornillos, D; Husillos, C; Aguerri, J A L; Broadhurst, T; Castander, F J; Cepa, J; Cervino, M; Delgado, R M Gonzalez; Infante, L; Marquez, I; Masegosa, J; Martinez, V J; Prada, F; Quintana, J M; Sanchez, S F

    2010-01-01

    This paper presents the characterization of the optical range of the ALHAMBRA photometric system, a 20 contiguous, equal-width, medium-band CCD system with wavelength coverage from 3500A to 9700A. The photometric description of the system is done by presenting the full response curve as a product of the filters, CCD and atmospheric transmission curves, and using some first and second order moments of this response function. We also introduce the set of standard stars that defines the system, formed by 31 classic spectrophotometric standard stars which have been used in the calibration of other known photometric systems, and 288 stars, flux calibrated homogeneously, from the Next Generation Spectral Library (NGSL). Based on the NGSL, we determine the transformation equations between Sloan Digital Sky Survey (SDSS) ugriz photometry and the ALHAMBRA photometric system, in order to establish some relations between both systems. Finally we develop and discuss a strategy to calculate the photometric zero points of ...

  16. Beam Synchronous Timing Systems

    CERN Document Server

    Peters, A

    2003-01-01

    For many beam diagnostics purposes beam synchronous timing systems are needed in addition to the timing systems supplied by the control systems of the different accelerators. The demands and techniques of different accelerator facilities will be discussed along the following aspects: Bunch and macro pulse synchronous timing systems Solutions for different time scales from ps to ms Coupling to the RF and control systems of the different accelerators Electronics for the beam synchronous timing systems: parameters, techniques, controlling Use of industrial products for bunch synchronous timing systems, e.g. function generators Distribution of the timing signals: electronically via cables, optically via fibres or wireless Coupling to and use of timing standards: IRIG-B, GPS, ? The participants should present and describe solutions from their facilities with some transparencies as a starting point for the discussion.

  17. Systems engineering and analysis

    CERN Document Server

    Blanchard, Benjamin S

    2010-01-01

    For senior-level undergraduate and first and second year graduate systems engineering and related courses. A total life-cycle approach to systems and their analysis. This practical introduction to systems engineering and analysis provides the concepts, methodologies, models, and tools needed to understand and implement a total life-cycle approach to systems and their analysis. The authors focus first on the process of bringing systems into being--beginning with the identification of a need and extending that need through requirements determination, functional analysis and allocation, design synthesis, evaluation, and validation, operation and support, phase-out, and disposal. Next, the authors discuss the improvement of systems currently in being, showing that by employing the iterative process of analysis, evaluation, feedback, and modification, most systems in existence can be improved in their affordability, effectiveness, and stakeholder satisfaction.

  18. Synchronization of chaotic systems

    Energy Technology Data Exchange (ETDEWEB)

    Pecora, Louis M.; Carroll, Thomas L. [U.S. Naval Research Laboratory, Washington, District of Columbia 20375 (United States)

    2015-09-15

    We review some of the history and early work in the area of synchronization in chaotic systems. We start with our own discovery of the phenomenon, but go on to establish the historical timeline of this topic back to the earliest known paper. The topic of synchronization of chaotic systems has always been intriguing, since chaotic systems are known to resist synchronization because of their positive Lyapunov exponents. The convergence of the two systems to identical trajectories is a surprise. We show how people originally thought about this process and how the concept of synchronization changed over the years to a more geometric view using synchronization manifolds. We also show that building synchronizing systems leads naturally to engineering more complex systems whose constituents are chaotic, but which can be tuned to output various chaotic signals. We finally end up at a topic that is still in very active exploration today and that is synchronization of dynamical systems in networks of oscillators.

  19. Continuous recovery system for electrorefiner system

    Science.gov (United States)

    Williamson, Mark A.; Wiedmeyer, Stanley G.; Willit, James L.; Barnes, Laurel A.; Blaskovitz, Robert J.

    2014-06-10

    A continuous recovery system for an electrorefiner system may include a trough having a ridge portion and a furrow portion. The furrow portion may include a first section and a second section. An inlet and exit pipe may be connected to the trough. The inlet pipe may include an outlet opening that opens up to the first section of the furrow portion of the trough. The exit pipe may include an entrance opening that opens up to the second section of the furrow portion of the trough. A chain may extend through the inlet and exit pipes and along the furrow portion of the trough. The chain may be in a continuous loop form. A plurality of flights may be secured to the chain. Accordingly, the desired product may be continuously harvested from the electrorefiner system without having to halt the electrical power and/or remove the cathode and anode assemblies.

  20. Immune System Inspired Strategies for Distributed Systems

    CERN Document Server

    Banerjee, Soumya

    2010-01-01

    Many components of the IS are constructed as modular units which do not need to communicate with each other such that the number of components increases but the size remains constant. However, a sub-modular IS architecture in which lymph node number and size both increase sublinearly with body size is shown to efficiently balance the requirements of communication and migration, consistent with experimental data. We hypothesize that the IS architecture optimizes the tradeoff between local search for pathogens and global response using antibodies. Similar to natural immune systems, physical space and resource are also important constraints on Artificial Immune Systems (AIS), especially distributed systems applications used to connect low-powered sensors using short-range wireless communication. AIS problems like distributed robot control will also require a sub-modular architecture to efficiently balance the tradeoff between local search for a solution and global response or proliferation of the solution betwee...

  1. Automated Information System (AIS) Alarm System

    Energy Technology Data Exchange (ETDEWEB)

    Hunteman, W.

    1997-05-01

    The Automated Information Alarm System is a joint effort between Los Alamos National Laboratory, Lawrence Livermore National Laboratory, and Sandia National Laboratory to demonstrate and implement, on a small-to-medium sized local area network, an automated system that detects and automatically responds to attacks that use readily available tools and methodologies. The Alarm System will sense or detect, assess, and respond to suspicious activities that may be detrimental to information on the network or to continued operation of the network. The responses will allow stopping, isolating, or ejecting the suspicious activities. The number of sensors, the sensitivity of the sensors, the assessment criteria, and the desired responses may be set by the using organization to meet their local security policies.

  2. Genetic control of pungency in C. chinense via the Pun1 locus.

    Science.gov (United States)

    Stewart, Charles; Mazourek, Michael; Stellari, Giulia M; O'Connell, Mary; Jahn, Molly

    2007-01-01

    Capsaicin, the pungent principle in hot peppers, acts to deter mammals from consuming pungent pepper pods. Capsaicinoid biosynthesis is restricted to the genus Capsicum and results from the acylation of the aromatic compound, vanillylamine, with a branched-chain fatty acid. The presence of capsaicinoids is controlled by the Pun1 locus, which encodes a putative acyltransferase. In its homozygous recessive state, pun1/pun1, capsaicinoids are not produced by the pepper plant. HPLC analysis confirmed that capsaicinoids are only found in the interlocular septa of pungent pepper fruits. Immunolocalization studies showed that capsaicinoid biosynthesis is uniformly distributed across the epidermal cells of the interlocular septum. Capsaicinoids are secreted from glandular epidermal cells into subcuticular cavities that swell to form blisters along the epidermis. Blister development is positively associated with capsaicinoid accumulation and blisters are not present in non-pungent fruit. A genetic study was used to determine if the absence of blisters in non-pungent fruit acts independently of Pun1 to control pungency. Screening of non-pungent germplasm and genetic complementation tests identified a previously unknown recessive allele of Pun1, named pun1(2). Sequence analysis of pun1(2) revealed that a four base pair deletion results in a frameshift mutation and the predicted production of a truncated protein. Genetic analysis revealed that pun1(2) co-segregated exactly with the absence of blisters, non-pungency, and a reduced transcript accumulation of several genes involved in capsaicinoid biosynthesis. Collectively, these results establish that blister formation requires the Pun1 allele and that pun1(2) is a recessive allele from C. chinense that results in non-pungency.

  3. Vorkommen und Einfluss von Acyl-Thioestern auf das Fettsäuremuster der Vanillylamide in Capsicum spp.

    OpenAIRE

    Thiele, Roland

    2008-01-01

    Plants of the genus Capsicum (e.g. bell pepper and chili pepper) are among the oldest cultivated plants. Their fruits are used as spice for over 8000 years, as archaeological findings on millstones and pottery show. Pungency, a quality criterion in chili, is caused by a group of vanillylamides, the capsaicinoids. They are a unique category of alkaloids restricted to the genus Capsicum. More than 30 capsaicinoids, differing only in the fatty acid structures, have been described. Capsaicinoi...

  4. In vivo and in vitro content of capsaicin in pepper(Capsicum annuum L.)

    OpenAIRE

    Koleva Gudeva, Liljana; Spasenoski, Mirko; Rafajlovska, Vesna

    2004-01-01

    From all groups of biological active-secondary metabolites, in the species of genus Capsicum the most importance have the alkaloids capsaicinoides, which are present only in the cultivars of genus Capsicum, and only they are responsible for the pungent of pepper. From all capsaicinoides only two compounds with 80-90% are responsible for the pungent of papper, and they are capsaicin and dihidrocapsaicin.

  5. Paravirtualization for HPC Systems

    Energy Technology Data Exchange (ETDEWEB)

    Youseff, L; Wolski, R; Gorda, B; Krintz, C

    2006-10-12

    Virtualization has become increasingly popular for enabling full system isolation, load balancing, and hardware multiplexing. This wide-spread use is the result of novel techniques such as paravirtualization that make virtualization systems practical and efficient. Paravirtualizing systems export an interface that is slightly different from the underlying hardware but that significantly streamlines and simplifies the virtualization process. In this work, we investigate the efficacy of using paravirtualizing software for performance-critical HPC kernels and applications. Such systems are not currently employed in HPC environments due to their perceived overhead. However, virtualization systems offer tremendous potential for benefiting HPC systems by facilitating application isolation, portability, operating system customization, and program migration. We present a comprehensive performance evaluation of Xen, a low-overhead, Linux-based, virtual machine monitor (VMM), for paravirtualization of HPC cluster systems at Lawrence Livermore National Lab (LLNL). We consider four categories of micro-benchmarks from the HPC Challenge (HPCC) and LLNL ASCI Purple suites to evaluate a wide range of subsystem-specific behaviors. In addition, we employ macro-benchmarks and HPC application to evaluate overall performance in a real setting. We also employ statistically sound methods to compare the performance of a paravirtualized kernel against three popular Linux operating systems: RedHat Enterprise 4 (RHEL4) for build versions 2.6.9 and 2.6.12 and the LLNL CHAOS kernel, a specialized version of RHEL4. Our results indicate that Xen is very efficient and practical for HPC systems.

  6. Modeling Sustainable Food Systems

    Science.gov (United States)

    Allen, Thomas; Prosperi, Paolo

    2016-05-01

    The processes underlying environmental, economic, and social unsustainability derive in part from the food system. Building sustainable food systems has become a predominating endeavor aiming to redirect our food systems and policies towards better-adjusted goals and improved societal welfare. Food systems are complex social-ecological systems involving multiple interactions between human and natural components. Policy needs to encourage public perception of humanity and nature as interdependent and interacting. The systemic nature of these interdependencies and interactions calls for systems approaches and integrated assessment tools. Identifying and modeling the intrinsic properties of the food system that will ensure its essential outcomes are maintained or enhanced over time and across generations, will help organizations and governmental institutions to track progress towards sustainability, and set policies that encourage positive transformations. This paper proposes a conceptual model that articulates crucial vulnerability and resilience factors to global environmental and socio-economic changes, postulating specific food and nutrition security issues as priority outcomes of food systems. By acknowledging the systemic nature of sustainability, this approach allows consideration of causal factor dynamics. In a stepwise approach, a logical application is schematized for three Mediterranean countries, namely Spain, France, and Italy.

  7. Distributed Deliberative Recommender Systems

    Science.gov (United States)

    Recio-García, Juan A.; Díaz-Agudo, Belén; González-Sanz, Sergio; Sanchez, Lara Quijano

    Case-Based Reasoning (CBR) is one of most successful applied AI technologies of recent years. Although many CBR systems reason locally on a previous experience base to solve new problems, in this paper we focus on distributed retrieval processes working on a network of collaborating CBR systems. In such systems, each node in a network of CBR agents collaborates, arguments and counterarguments its local results with other nodes to improve the performance of the system's global response. We describe D2ISCO: a framework to design and implement deliberative and collaborative CBR systems that is integrated as a part of jcolibritwo an established framework in the CBR community. We apply D2ISCO to one particular simplified type of CBR systems: recommender systems. We perform a first case study for a collaborative music recommender system and present the results of an experiment of the accuracy of the system results using a fuzzy version of the argumentation system AMAL and a network topology based on a social network. Besides individual recommendation we also discuss how D2ISCO can be used to improve recommendations to groups and we present a second case of study based on the movie recommendation domain with heterogeneous groups according to the group personality composition and a group topology based on a social network.

  8. KODAK Directview DR Systems

    Directory of Open Access Journals (Sweden)

    Stefan Baum

    2007-08-01

    Full Text Available KODAK DIRECTVIEW DR 9500 System. The flexibility of a dual detector system in a unique, sin-gle detector design. The DR 9500 easily moves "around" the patient, making it ideal for all horizontal, upright and angled projections, and added convenience for patients - particularly those with limited mobility. "nKODAK DIRECTVIEW DR 7500 System New-generation system provides the ultimate in digital radiography flexibility. Modular components ena-ble you to easily configure a DR system to fit your space, applications, workflow - and budget."nHighest operator comfort:"n• Auto tracking (tube, table, wall stand, both direc-tions"n• Automatic, perpendicular centring to detectors center for table and wall stand"n• Auto positioning (choice of 16, customer programmable tube-detector positions"n• Manual or full motorised up and down motion and motorised detector tilt capability"n• Overhead tube system optional motorised, standard length rail system (5x3m"n• Floor mounted or with floor rails equipped DR 7500WM wall stand"n• Moveable, motorised table with floating top table"nScaleable: "n• degree of motorisation, degree of automatic func-tions"nKODAK DIRECTVIEW DR 3000 System This powerful multipurpose system is designed to handle a full range of general radiography procedures. With its simple design, space saving footprint, and advanced "ease of use" features, this system can enhance departmental workflow, productivity, and the quality of patient care.

  9. Man-systems distributed system for Space Station Freedom

    Science.gov (United States)

    Lewis, J. L.

    1990-01-01

    Viewgraphs on man-systems distributed system for Space Station Freedom are presented. Topics addressed include: description of man-systems (definition, requirements, scope, subsystems, and topologies); implementation (approach, tools); man-systems interfaces (system to element and system to system); prime/supporting development relationship; selected accomplishments; and technical challenges.

  10. A contemporary view of systems engineering. [definition of system and discussion of systems approach

    Science.gov (United States)

    Miles, R. F., Jr.

    1974-01-01

    The concept of a 'system' is defined, and the 'systems approach' is discussed. Four contemporary examples of the systems approach are presented: an operations research project, the planning-programming-budgeting system, an information processing system, and aerospace programs.

  11. Taking a systems approach to ecological systems

    Science.gov (United States)

    Grace, James B.

    2015-01-01

    Increasingly, there is interest in a systems-level understanding of ecological problems, which requires the evaluation of more complex, causal hypotheses. In this issue of the Journal of Vegetation Science, Soliveres et al. use structural equation modeling to test a causal network hypothesis about how tree canopies affect understorey communities. Historical analysis suggests structural equation modeling has been under-utilized in ecology.

  12. INFORMATION SUPPORT SYSTEM OF MEDICAL SYSTEM RESEARCH

    Directory of Open Access Journals (Sweden)

    V. P. Martsenyuk

    2014-12-01

    Conclusions. The complex qualitative behavior of diseases models depending on parameters and controllers was observed in our investigation even without considering probabilistic nature of the majority of quantities and parameters of information models. KEY WORDS: data mining, system analysis, medical research, decision making

  13. Multiobjective Collaborative Optimization of Systems of Systems

    Science.gov (United States)

    2005-06-01

    149 Table 12. Representative Shipyard Dimension Limits ...operationally independent. (System-ysem 1)..y Design ,I ’"esignReqm ts ... .em (Sy stem 1) S stems F S Funcion Overlap Reqmts...te m... limited resources. National Strategy & Joint Operations Security OverarchingS rategy Concept GuidanceFigre . once ap a N E p ,inintegrated archint ur int

  14. Write 'systemic small RNAs': read 'systemic immunity'

    NARCIS (Netherlands)

    Seifi Abdolabad, A.R.

    2011-01-01

    About 50 years ago, it was reported that pathogen-infected plants are less susceptible to a broad spectrum of the subsequent pathogen attacks. This form of induced resistance, which resembles the immunisation in mammalian cells, is called systemic acquired resistance (SAR). In the last 10 years, pla

  15. Operational Management System for Regulated Water Systems

    Science.gov (United States)

    van Loenen, A.; van Dijk, M.; van Verseveld, W.; Berger, H.

    2012-04-01

    Most of the Dutch large rivers, canals and lakes are controlled by the Dutch water authorities. The main reasons concern safety, navigation and fresh water supply. Historically the separate water bodies have been controlled locally. For optimizating management of these water systems an integrated approach was required. Presented is a platform which integrates data from all control objects for monitoring and control purposes. The Operational Management System for Regulated Water Systems (IWP) is an implementation of Delft-FEWS which supports operational control of water systems and actively gives advice. One of the main characteristics of IWP is that is real-time collects, transforms and presents different types of data, which all add to the operational water management. Next to that, hydrodynamic models and intelligent decision support tools are added to support the water managers during their daily control activities. An important advantage of IWP is that it uses the Delft-FEWS framework, therefore processes like central data collection, transformations, data processing and presentation are simply configured. At all control locations the same information is readily available. The operational water management itself gains from this information, but it can also contribute to cost efficiency (no unnecessary pumping), better use of available storage and advise during (water polution) calamities.

  16. System of Systems Technology Readiness Assessment

    Science.gov (United States)

    2007-09-01

    Challenge [From: Siel, 2006]...............34 Figure 17. SEI LISI Model [From: Kasunic and Anderson, 2004]...................................38 Figure...Interagency, Intergovernmental and Multi-National JV Joint Vision KPP Key Performance Parameter LISI Levels of Information Systems Interoperability...algorithms, methods , materials, procedures and techniques. CTEs drive functional and non-functional performance. Examples of non-functional CTEs would

  17. The global Earth observation system of systems

    Science.gov (United States)

    Achache, José

    2010-05-01

    Recognizing the growing need for improved Earth observations, 140 governments and leading international organizations have established the Group on Earth Observations, or GEO, to collaborate and implement a Global Earth Observation System of Systems (GEOSS) by the year 2015. Countries and organizations are contributing their respective Earth monitoring systems, from satellites in space and in situ instruments on land, in the oceans and in the atmosphere. They are interlinking these systems so that, together, they provide a more complete picture of Earth's systems dynamics. GEO is developing common technical standards to pool observations and ensure their cross calibration and validation. It is building a web-based infrastructure to ensure easy access to the wealth of data and services contributed to, or generated by, GEOSS. GEO has been promoting the free and open sharing and dissemination of Earth observation data which has already driven significant changes in data distribution policies of several key Earth observing satellites: Landsat, Cbers and the future Sentinels of GMES. GEO is also reflecting on solutions to transition research systems into operational observing systems and ensure their long-term sustainability. First, the current status of GEOSS implementation and these core activities of GEO will be presented. Then, examples of global data sets and information systems or services developed through GEOSS will be presented: - a high-resolution global digital elevation model (DEM) based on Aster data was released by Japan and the USA. In situ measurements are now being used to improve the model as well as the stacking procedure used to develop it; - the Supersites initiative ensures coordinated access to data and information on natural hazards in geologically active regions. In light of the recent tragedy in Haiti, this project created a dedicated web site regularly updated with maps of seismicity, tectonics, Coulomb stress changes, topography, real and

  18. SSME Post Test Diagnostic System: Systems Section

    Science.gov (United States)

    Bickmore, Timothy

    1995-01-01

    An assessment of engine and component health is routinely made after each test firing or flight firing of a Space Shuttle Main Engine (SSME). Currently, this health assessment is done by teams of engineers who manually review sensor data, performance data, and engine and component operating histories. Based on review of information from these various sources, an evaluation is made as to the health of each component of the SSME and the preparedness of the engine for another test or flight. The objective of this project - the SSME Post Test Diagnostic System (PTDS) - is to develop a computer program which automates the analysis of test data from the SSME in order to detect and diagnose anomalies. This report primarily covers work on the Systems Section of the PTDS, which automates the analyses performed by the systems/performance group at the Propulsion Branch of NASA Marshall Space Flight Center (MSFC). This group is responsible for assessing the overall health and performance of the engine, and detecting and diagnosing anomalies which involve multiple components (other groups are responsible for analyzing the behavior of specific components). The PTDS utilizes several advanced software technologies to perform its analyses. Raw test data is analyzed using signal processing routines which detect features in the data, such as spikes, shifts, peaks, and drifts. Component analyses are performed by expert systems, which use 'rules-of-thumb' obtained from interviews with the MSFC data analysts to detect and diagnose anomalies. The systems analysis is performed using case-based reasoning. Results of all analyses are stored in a relational database and displayed via an X-window-based graphical user interface which provides ranked lists of anomalies and observations by engine component, along with supporting data plots for each.

  19. Autonomic nervous system and immune system interactions.

    Science.gov (United States)

    Kenney, M J; Ganta, C K

    2014-07-01

    The present review assesses the current state of literature defining integrative autonomic-immune physiological processing, focusing on studies that have employed electrophysiological, pharmacological, molecular biological, and central nervous system experimental approaches. Central autonomic neural networks are informed of peripheral immune status via numerous communicating pathways, including neural and non-neural. Cytokines and other immune factors affect the level of activity and responsivity of discharges in sympathetic and parasympathetic nerves innervating diverse targets. Multiple levels of the neuraxis contribute to cytokine-induced changes in efferent parasympathetic and sympathetic nerve outflows, leading to modulation of peripheral immune responses. The functionality of local sympathoimmune interactions depends on the microenvironment created by diverse signaling mechanisms involving integration between sympathetic nervous system neurotransmitters and neuromodulators; specific adrenergic receptors; and the presence or absence of immune cells, cytokines, and bacteria. Functional mechanisms contributing to the cholinergic anti-inflammatory pathway likely involve novel cholinergic-adrenergic interactions at peripheral sites, including autonomic ganglion and lymphoid targets. Immune cells express adrenergic and nicotinic receptors. Neurotransmitters released by sympathetic and parasympathetic nerve endings bind to their respective receptors located on the surface of immune cells and initiate immune-modulatory responses. Both sympathetic and parasympathetic arms of the autonomic nervous system are instrumental in orchestrating neuroimmune processes, although additional studies are required to understand dynamic and complex adrenergic-cholinergic interactions. Further understanding of regulatory mechanisms linking the sympathetic nervous, parasympathetic nervous, and immune systems is critical for understanding relationships between chronic disease

  20. Solar Stirling system development

    Science.gov (United States)

    Stearns, J. W., Jr.; Won, Y. S.; Poon, P. T.; Das, R.; Chow, E. Y.

    1979-01-01

    A low-cost, high-efficiency dish-Stirling solar thermal-electric power system is being developed for test in 1981. System components are the solar concentrator, receiver, fossil fuel combustor, thermal energy storage (TES), engine-generator, and power processing. System conceptualization is completed and design is in progress. Two receiver alternatives are being evaluated, a direct-coupled receiver-engine configuration with no TES and a heat pipe receiver with TES. System cost projections are being made. Goals for the system development task are (1) to develop an advanced dish-Stirling technology, utilizing a team of industrial contractors, (2) to demonstrate that technology at the system level, and (3) to determine how to achieve low production cost.

  1. Renewable Energy Systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2014-01-01

    are to be found when the electricity sector is combined with the heating and cooling sectors and/or the transportation sector. Moreover, the combination of electricity and gas infrastructures may play an important role in the design of future renewable energy systems. The paper illustrates why electricity smart......This paper presents the learning of a series of studies that analyse the problems and perspectives of converting the present energy system into a 100 % renewable energy system using a smart energy systems approach. As opposed to, for instance, the smart grid concept, which takes a sole focus...... on the electricity sector, smart energy systems include the entire energy system in its approach to identifying suitable energy infrastructure designs and operation strategies. The typical smart grid sole focus on the electricity sector often leads to the conclusion that transmission lines, flexible electricity...

  2. Intelligent Freigth Transport Systems

    DEFF Research Database (Denmark)

    Overø, Helene Martine; Larsen, Allan; Røpke, Stefan

    2009-01-01

    The Danish innovation project entitled “Intelligent Freight Transport Systems” aims at developing prototype systems integrating public intelligent transport systems (ITS) with the technology in vehicles and equipment as well as the IT-systems at various transport companies. The objective is to en......The Danish innovation project entitled “Intelligent Freight Transport Systems” aims at developing prototype systems integrating public intelligent transport systems (ITS) with the technology in vehicles and equipment as well as the IT-systems at various transport companies. The objective...... is to enhance the efficiency and lower the environmental impact in freight transport. In this paper, a pilot project involving real-time waste collection at a Danish waste collection company is described, and a solution approach is proposed. The problem corresponds to the dynamic version of the waste collection...

  3. Discrete control systems

    CERN Document Server

    Okuyama, Yoshifumi

    2014-01-01

    Discrete Control Systems establishes a basis for the analysis and design of discretized/quantized control systemsfor continuous physical systems. Beginning with the necessary mathematical foundations and system-model descriptions, the text moves on to derive a robust stability condition. To keep a practical perspective on the uncertain physical systems considered, most of the methods treated are carried out in the frequency domain. As part of the design procedure, modified Nyquist–Hall and Nichols diagrams are presented and discretized proportional–integral–derivative control schemes are reconsidered. Schemes for model-reference feedback and discrete-type observers are proposed. Although single-loop feedback systems form the core of the text, some consideration is given to multiple loops and nonlinearities. The robust control performance and stability of interval systems (with multiple uncertainties) are outlined. Finally, the monograph describes the relationship between feedback-control and discrete ev...

  4. Hybrid Action Systems

    DEFF Research Database (Denmark)

    Rönnkö, M.; Ravn, Anders Peter; Sere, K.

    2003-01-01

    In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time-derivatives in modell......In this paper we investigate the use of action systems with differential actions in the specifcation of hybrid systems. As the main contribution we generalize the definition of a differential action, allowing the use of arbitrary relations over model variables and their time...... parallel composition. Moreover, as the strength of the action system formalism is the support for stepwise development by refinement, we investigate refinement involving a differential action. We show that, due to the predicate transformer semantics, standard action refinement techniques apply also...... to the differential action, thus, allowing stepwise development of hybrid systems Udgivelsesdato: JAN 1...

  5. New celestial reference system

    Science.gov (United States)

    Seidelmann, P. K.; Kaplan, G. H.; van Flandern, T. C.

    It is pointed out that the IAU (1976) System of Astronomical Constants, the FK5 and new lunar and planetary theories are being introduced in 1984. The investigation and planning for the transition have revealed the complex interdependencies between observational techniques and the reference systems and their strong link to the rotating and orbiting earth. Details for the conversion to the new system are given. The concepts for a future reference system are developed, based on separating the real motions involved in such a way that observations from various moving platforms can be related to the appropriate coordinate system without involving motions that are not intrinsically involved in the observations. As a consequence, the reference systems determined or used in space, while affected by aberration and parallax, would logically be defined with no dependence on precession, nutation, polar motion, or Universal Time, all of which are concerned with motions of the earth's surface.

  6. Doing Systems Development

    DEFF Research Database (Denmark)

    Koch, Christian; Mathiasen, John Bang

    2014-01-01

    Systems development of wind turbine control is competitive with respect to innovation, time and cost. So how can learning possibly occur under such circumstances? Dewey’s pragmatist approach to learning is adopted, emphasising reciprocity between the systems developer’s individual experience...... of the indeterminate situation and the systems developers different experience. However, an extreme case reveals initiated learning processes and that the interchanges between materiality of the artefacts and systems developers block the learning processes due to a customer with imprecise demands and unclear system...... and the sociotechnical practice. The framework involves the concepts of sociotechnical practice, anchoring of indeterminate situation, and strip of doings towards determinate situation. An ethnographic study was made of four cases of systems development and learning do occur in the cases, enabled by converging anchoring...

  7. Layered Systems Engineering Engines

    Science.gov (United States)

    Breidenthal, Julian C.; Overman, Marvin J.

    2009-01-01

    A notation is described for depicting the relationships between multiple, contemporaneous systems engineering efforts undertaken within a multi-layer system-of-systems hierarchy. We combined the concepts of remoteness of activity from the end customer, depiction of activity on a timeline, and data flow to create a new kind of diagram which we call a "Layered Vee Diagram." This notation is an advance over previous notations because it is able to be simultaneously precise about activity, level of granularity, product exchanges, and timing; these advances provide systems engineering managers a significantly improved ability to express and understand the relationships between many systems engineering efforts. Using the new notation, we obtain a key insight into the relationship between project duration and the strategy selected for chaining the systems engineering effort between layers, as well as insights into the costs, opportunities, and risks associated with alternate chaining strategies.

  8. Dynamic system classifier

    CERN Document Server

    Pumpe, Daniel; Müller, Ewald; Enßlin, Torsten A

    2016-01-01

    Stochastic differential equations describe well many physical, biological and sociological systems, despite the simplification often made in their derivation. Here the usage of simple stochastic differential equations to characterize and classify complex dynamical systems is proposed within a Bayesian framework. To this end, we develop a dynamic system classifier (DSC). The DSC first abstracts training data of a system in terms of time dependent coefficients of the descriptive stochastic differential equation. Thereby the DSC identifies unique correlation structures within the training data. For definiteness we restrict the presentation of DSC to oscillation processes with a time dependent frequency {\\omega}(t) and damping factor {\\gamma}(t). Although real systems might be more complex, this simple oscillator captures many characteristic features. The {\\omega} and {\\gamma} timelines represent the abstract system characterization and permit the construction of efficient signal classifiers. Numerical experiment...

  9. Ontologies vs. Classification Systems

    DEFF Research Database (Denmark)

    Madsen, Bodil Nistrup; Erdman Thomsen, Hanne

    2009-01-01

    What is an ontology compared to a classification system? Is a taxonomy a kind of classification system or a kind of ontology? These are questions that we meet when working with people from industry and public authorities, who need methods and tools for concept clarification, for developing meta d...... classification systems and meta data taxonomies, should be based on ontologies.......What is an ontology compared to a classification system? Is a taxonomy a kind of classification system or a kind of ontology? These are questions that we meet when working with people from industry and public authorities, who need methods and tools for concept clarification, for developing meta...... data sets or for obtaining advanced search facilities. In this paper we will present an attempt at answering these questions. We will give a presentation of various types of ontologies and briefly introduce terminological ontologies. Furthermore we will argue that classification systems, e.g. product...

  10. Applied Control Systems Design

    CERN Document Server

    Mahmoud, Magdi S

    2012-01-01

    Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these e...

  11. Hydraulic Yaw System

    DEFF Research Database (Denmark)

    Stubkier, Søren; Pedersen, Henrik C.; Mørkholt, M.

    As wind turbines increase in size, combined with increased lifetime demands, new methods for load reduction needs to be examined. One method is to make the yaw system of the turbine soft/flexible and hereby dampen the loads to the system, which is the focus of the current paper. By utilizing...... the HAWC2 aeroelastic code and an extended model of the NREL 5MW turbine combined with a simplified linear model of the turbine, the parameters of the soft yaw system are optimized to reduce loading in critical components. Results shows that a significant reduction in fatigue and extreme loads to the yaw...... system and rotor shaft when utilizing the soft yaw drive concept compared to the original stiff yaw system. The physical demands of the hydraulic yaw system are furthermore examined for a life time of 20 years. Based on the extrapolated loads, the duty cycles show that it is possible to construct...

  12. Operations management system

    Science.gov (United States)

    Brandli, A. E.; Eckelkamp, R. E.; Kelly, C. M.; Mccandless, W.; Rue, D. L.

    1990-01-01

    The objective of an operations management system is to provide an orderly and efficient method to operate and maintain aerospace vehicles. Concepts are described for an operations management system and the key technologies are highlighted which will be required if this capability is brought to fruition. Without this automation and decision aiding capability, the growing complexity of avionics will result in an unmanageable workload for the operator, ultimately threatening mission success or survivability of the aircraft or space system. The key technologies include expert system application to operational tasks such as replanning, equipment diagnostics and checkout, global system management, and advanced man machine interfaces. The economical development of operations management systems, which are largely software, will require advancements in other technological areas such as software engineering and computer hardware.

  13. Quantum System Identification

    CERN Document Server

    Burgarth, Daniel

    2011-01-01

    The aim of quantum system identification is to estimate the ingredients inside a black box, in which some quantum-mechanical unitary process takes place, by just looking at its input-output behavior. Here we establish a basic and general framework for quantum system identification, that allows us to classify how much knowledge about the quantum system is attainable, in principle, from a given experimental setup. Prior knowledge on some elements of the black box helps the system identification. We present an example in which a Bell measurement is more efficient to identify the system. When the topology of the system is known, the framework enables us to establish a general criterion for the estimability of the coupling constants in its Hamiltonian.

  14. Dynamic system classifier

    Science.gov (United States)

    Pumpe, Daniel; Greiner, Maksim; Müller, Ewald; Enßlin, Torsten A.

    2016-07-01

    Stochastic differential equations describe well many physical, biological, and sociological systems, despite the simplification often made in their derivation. Here the usage of simple stochastic differential equations to characterize and classify complex dynamical systems is proposed within a Bayesian framework. To this end, we develop a dynamic system classifier (DSC). The DSC first abstracts training data of a system in terms of time-dependent coefficients of the descriptive stochastic differential equation. Thereby the DSC identifies unique correlation structures within the training data. For definiteness we restrict the presentation of the DSC to oscillation processes with a time-dependent frequency ω (t ) and damping factor γ (t ) . Although real systems might be more complex, this simple oscillator captures many characteristic features. The ω and γ time lines represent the abstract system characterization and permit the construction of efficient signal classifiers. Numerical experiments show that such classifiers perform well even in the low signal-to-noise regime.

  15. A Scalable Module System

    CERN Document Server

    Rabe, Florian

    2011-01-01

    Symbolic and logic computation systems ranging from computer algebra systems to theorem provers are finding their way into science, technology, mathematics and engineering. But such systems rely on explicitly or implicitly represented mathematical knowledge that needs to be managed to use such systems effectively. While mathematical knowledge management (MKM) "in the small" is well-studied, scaling up to large, highly interconnected corpora remains difficult. We hold that in order to realize MKM "in the large", we need representation languages and software architectures that are designed systematically with large-scale processing in mind. Therefore, we have designed and implemented the MMT language -- a module system for mathematical theories. MMT is designed as the simplest possible language that combines a module system, a foundationally uncommitted formal semantics, and web-scalable implementations. Due to a careful choice of representational primitives, MMT allows us to integrate existing representation l...

  16. Advanced intelligent systems

    CERN Document Server

    Ryoo, Young; Jang, Moon-soo; Bae, Young-Chul

    2014-01-01

    Intelligent systems have been initiated with the attempt to imitate the human brain. People wish to let machines perform intelligent works. Many techniques of intelligent systems are based on artificial intelligence. According to changing and novel requirements, the advanced intelligent systems cover a wide spectrum: big data processing, intelligent control, advanced robotics, artificial intelligence and machine learning. This book focuses on coordinating intelligent systems with highly integrated and foundationally functional components. The book consists of 19 contributions that features social network-based recommender systems, application of fuzzy enforcement, energy visualization, ultrasonic muscular thickness measurement, regional analysis and predictive modeling, analysis of 3D polygon data, blood pressure estimation system, fuzzy human model, fuzzy ultrasonic imaging method, ultrasonic mobile smart technology, pseudo-normal image synthesis, subspace classifier, mobile object tracking, standing-up moti...

  17. ULS Systems Research Roadmap

    Science.gov (United States)

    2008-03-01

    capability Framework for incorporating additional ULS systems research Motivate Research • The roadmap shows how an individual research initiative...6.2.2 Metaheuristics in Software Engineering 6.2.3 Digital Evolution 6.3.1 Design of All Levels 6.3.2 Design Spaces and Design Rules 6.3.3 Harnessing...achieving a future ULS systems capability Framework for incorporating additional ULS systems research Motivate Research • The roadmap shows how an

  18. Global Resources Information System

    Science.gov (United States)

    Estes, J. E.; Star, J. L. (Principal Investigator); Cosentino, M. J.; Mann, L. J.

    1984-01-01

    The basic design criteria and operating characteristics of a Global Resources Information System GRIS are defined. Researchers are compiling background material and aiding JPL personnel in this project definition phase of GRIS. A bibliography of past studies and current work on large scale information systems is compiled. The material in this bibliography will be continuously updated throughout the lifetime of this grant. Project management, systems architecture, and user applications are also discussed.

  19. Evolvable Neural Software System

    Science.gov (United States)

    Curtis, Steven A.

    2009-01-01

    The Evolvable Neural Software System (ENSS) is composed of sets of Neural Basis Functions (NBFs), which can be totally autonomously created and removed according to the changing needs and requirements of the software system. The resulting structure is both hierarchical and self-similar in that a given set of NBFs may have a ruler NBF, which in turn communicates with other sets of NBFs. These sets of NBFs may function as nodes to a ruler node, which are also NBF constructs. In this manner, the synthetic neural system can exhibit the complexity, three-dimensional connectivity, and adaptability of biological neural systems. An added advantage of ENSS over a natural neural system is its ability to modify its core genetic code in response to environmental changes as reflected in needs and requirements. The neural system is fully adaptive and evolvable and is trainable before release. It continues to rewire itself while on the job. The NBF is a unique, bilevel intelligence neural system composed of a higher-level heuristic neural system (HNS) and a lower-level, autonomic neural system (ANS). Taken together, the HNS and the ANS give each NBF the complete capabilities of a biological neural system to match sensory inputs to actions. Another feature of the NBF is the Evolvable Neural Interface (ENI), which links the HNS and ANS. The ENI solves the interface problem between these two systems by actively adapting and evolving from a primitive initial state (a Neural Thread) to a complicated, operational ENI and successfully adapting to a training sequence of sensory input. This simulates the adaptation of a biological neural system in a developmental phase. Within the greater multi-NBF and multi-node ENSS, self-similar ENI s provide the basis for inter-NBF and inter-node connectivity.

  20. ECONOMICS OF INFORMATION SYSTEMS

    Science.gov (United States)

    The paper presents a study of the rational choice-making of an individual from among available information systems , or available components of such...components, of information systems . The available set depends on the choices made by suppliers. Joint choices by demanders and suppliers would...determine which information systems are in fact produced and used under given external conditions. These conditions include the technological knowledge of those concerned.

  1. Management Information Systems Research.

    Science.gov (United States)

    Research on management information systems is illusive in many respects. Part of the basic research problem in MIS stems from the absence of standard...definitions and the lack of a unified body of theory. Organizations continue to develop large and often very efficient information systems , but...decision making. But the transition from these results to the realization of ’satisfactory’ management information systems remains difficult indeed. The

  2. Innovativeness in production systems

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    2016-01-01

    a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies......Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...

  3. Stochastic power system operation

    OpenAIRE

    Power, Michael

    2010-01-01

    This paper outlines how to economically and reliably operate a power system with high levels of renewable generation which are stochastic in nature. It outlines the challenges for system operators, and suggests tools and methods for meeting this challenge, which is one of the most fundamental since large scale power networks were instituted. The Ireland power system, due to its nature and level of renewable generation, is considered as an example in this paper.

  4. Photovoltaic systems. Program summary

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-12-01

    Each of the Department of Energy's Photovoltaic Systems Program projects funded and/or in existence during fiscal year 1978 (October 1, 1977 through September 30, 1978) are described. The project sheets list the contractor, principal investigator, and contract number and funding and summarize the programs and status. The program is divided into various elements: program assessment and integration, research and advanced development, technology development, system definition and development, system application experiments, and standards and performance criteria. (WHK)

  5. Drone Control System

    Science.gov (United States)

    1983-01-01

    Drones, subscale vehicles like the Firebees, and full scale retired military aircraft are used to test air defense missile systems. The DFCS (Drone Formation Control System) computer, developed by IBM (International Business Machines) Federal Systems Division, can track ten drones at once. A program called ORACLS is used to generate software to track and control Drones. It was originally developed by Langley and supplied by COSMIC (Computer Software Management and Information Center). The program saved the company both time and money.

  6. Possible number systems.

    Science.gov (United States)

    Rips, Lance J; Thompson, Samantha

    2014-03-01

    Number systems-such as the natural numbers, integers, rationals, reals, or complex numbers-play a foundational role in mathematics, but these systems can present difficulties for students. In the studies reported here, we probed the boundaries of people's concept of a number system by asking them whether "number lines" of varying shapes qualify as possible number systems. In Experiment 1, participants rated each of a set of number lines as a possible number system, where the number lines differed in their structures (a single straight line, a step-shaped line, a double line, or two branching structures) and in their boundedness (unbounded, bounded below, bounded above, bounded above and below, or circular). Participants also rated each of a group of mathematical properties (e.g., associativity) for its importance to number systems. Relational properties, such as associativity, predicted whether participants believed that particular forms were number systems, as did the forms' ability to support arithmetic operations, such as addition. In Experiment 2, we asked participants to produce properties that were important for number systems. Relational, operation, and use-based properties from this set again predicted ratings of whether the number lines were possible number systems. In Experiment 3, we found similar results when the number lines indicated the positions of the individual numbers. The results suggest that people believe that number systems should be well-behaved with respect to basic arithmetic operations, and that they reject systems for which these operations produce ambiguous answers. People care much less about whether the systems have particular numbers (e.g., 0) or sets of numbers (e.g., the positives).

  7. Real-time systems

    OpenAIRE

    Badr, Salah M.; Bruztman, Donald P.; Nelson, Michael L.; Byrnes, Ronald Benton

    1992-01-01

    This paper presents an introduction to the basic issues involved in real-time systems. Both real-time operating sys and real-time programming languages are explored. Concurrent programming and process synchronization and communication are also discussed. The real-time requirements of the Naval Postgraduate School Autonomous Under Vehicle (AUV) are then examined. Autonomous underwater vehicle (AUV), hard real-time system, real-time operating system, real-time programming language, real-time sy...

  8. Thermal conveyance systems

    Energy Technology Data Exchange (ETDEWEB)

    Meador, J.T.

    1978-09-01

    The purpose of the evaluation is to characterize modern technology for long-distance, large-diameter, underground steam and high-temperature water (HTW) transport systems and for hot-water and chilled-water systems that distribute thermal energy within communities. Data on the status of existing systems have been compiled and compared with recommended design factors for fluid flow to aid in parameter selection for assessing performance in transporting and distributing thermal energy.

  9. Small asteroid system evolution

    OpenAIRE

    Jacobson, Seth A.

    2014-01-01

    Observations with radar, photometric and direct imaging techniques have discovered that multiple asteroid systems can be divided clearly into a handful of different morphologies, and recently, the discovery of small unbound asteroid systems called asteroid pairs have revolutionized the study of small asteroid systems. Simultaneously, new theoretical advances have demonstrated that solar radiation dictates the evolution of small asteroids with strong implications for asteroid internal structur...

  10. Matrix fractional systems

    Science.gov (United States)

    Tenreiro Machado, J. A.

    2015-08-01

    This paper addresses the matrix representation of dynamical systems in the perspective of fractional calculus. Fractional elements and fractional systems are interpreted under the light of the classical Cole-Cole, Davidson-Cole, and Havriliak-Negami heuristic models. Numerical simulations for an electrical circuit enlighten the results for matrix based models and high fractional orders. The conclusions clarify the distinction between fractional elements and fractional systems.

  11. The KLOE trigger system

    Energy Technology Data Exchange (ETDEWEB)

    Adinolfi, M.; Aloisio, A.; Ambrosino, F.; Andryakov, A.; Antonelli, A.; Antonelli, M.; Anulli, F.; Bacci, C.; Bankamp, A.; Barbiellini, G.; Bellini, F.; Bencivenni, G.; Bertolucci, S.; Bini, C.; Bloise, C.; Bocci, V.; Bossi, F.; Branchini, P.; Bulychjov, S.A.; Cabibbo, G.; Calcaterra, A.; Caloi, R.; Campana, P.; Capon, G.; Carboni, G.; Cardini, A.; Casarsa, M.; Cataldi, G.; Ceradini, F.; Cervelli, F.; Cevenini, F.; Chiefari, G.; Ciambrone, P.; Conetti, S.; Conticelli, S.; De Lucia, E.; De Robertis, G.; De Sangro, R.; De Simone, P.; De Zorzi, G.; Dell' Agnello, S.; Denig, E.; Di Domenico, A.; Di Donato, C.; Di Falco, S.; Doria, A.; Drago, E.; Elia, V.; Erriquez, O.; Farilla, A.; Felici, G.; Ferrari, A.; Ferrer, M.L.; Finocchiaro, G.; Forti, C.; Franceschi, A.; Franzini, P.; Gao, M.L.; Gatti, C.; Gauzzi, P.; Giovannella, S.; Golovatyuk, V.; Gorini, E.; Grancagnolo, F.; Grandegger, W.; Graziani, E.; Guarnaccia, P.; Hagel, U. von; Han, H.G.; Han, S.W.; Huang, X.; Incagli, M.; Ingrosso, L.; Jang, Y.Y.; Kim, W.; Kluge, W.; Kulikov, V.; Lacava, F.; Lanfranchi, G.; Lee-Franzini, J.; Lomtadze, F.; Luisi, C.; Mao, C.S.; Martemianov, M.; Matsyuk, M.; Mei, W.; Merola, L.; Messi, R.; Miscetti, S.; Moalem, A.; Moccia, S.; Moulson, M.; Mueller, S.; Murtas, F.; Napolitano, M.; Nedosekin, A.; Panareo, M.; Pacciani, L.; Pages, P.; Palutan, M.; Paoluzi, L.; Pasqualucci, E.; Passalacqua, L.; Passaseo, M.; Passeri, A.; Patera, V.; Petrolo, E.; Petrucci, G.; Picca, D.; Pirozzi, G.; Pistillo, C.; Pollack, M.; Pontecorvo, L.; Primavera, M.; Ruggieri, F.; Santangelo, P.; Santovetti, E.; Saracino, G.; Schamberger, R.D.; Schwick, C.; Sciascia, B. E-mail: barbara.sciascia@romal.infn.it; Sciubba, A.; Scuri, F.; Sfiligoi, I.; Shan, J.; Silano, P.; Spadaro, T.; Spagnolo, S.; Spiriti, E.; Stanescu, C.; Tong, G.L.; Tortora, L.; Valente, E.; Valente, P.; Valeriani, B.; Venanzoni, G.; Veneziano, S.; Wu, Y.; Xie, Y.G.; Zhao, P.P.; Zhou, Y

    2001-04-01

    A double-level trigger system has been developed for the KLOE experiment. Custom electronics asserts a trigger in a 2 {mu}s decision time. The decision is based on the combined information of the electromagnetic calorimeter and the drift chamber. The entire trigger system is continuously monitored, and data flowing from the trigger system have allowed both an efficient online monitoring of the detector and an online luminosity measurement.

  12. FNAL central email systems

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, Jack; Lilianstrom, Al; Pasetes, Ray; Hill, Kevin; /Fermilab

    2004-10-01

    The FNAL Email System is the primary point of entry for email destined for an employee or user at Fermilab. This centrally supported system is designed for reliability and availability. It uses multiple layers of protection to help ensure that: (1) SPAM messages are tagged properly; (2) All mail is inspected for viruses; and (3) Valid mail gets delivered. This system employs numerous redundant subsystems to accomplish these tasks.

  13. Electron beam focusing system

    Energy Technology Data Exchange (ETDEWEB)

    Dikansky, N.; Nagaitsev, S.; Parkhomchuk, V.

    1997-09-01

    The high energy electron cooling requires a very cold electron beam. Thus, the electron beam focusing system is very important for the performance of electron cooling. A system with and without longitudinal magnetic field is presented for discussion. Interaction of electron beam with the vacuum chamber as well as with the background ions and stored antiprotons can cause the coherent electron beam instabilities. Focusing system requirements needed to suppress these instabilities are presented.

  14. Blind system identification

    OpenAIRE

    Abed-Meriam, Karim; Qui, Wanzhi; Hua, Yingbo

    1997-01-01

    Blind system identification (BSI) is a fundamental signal processing technology aimed at retrieving a system's unknown information from its output only. This technology has a wide range of possible applications such as mobile communications, speech reverberation cancellation, and blind image restoration. This paper reviews a number of recently developed concepts and techniques for BSI, which include the concept of blind system identifiability in a deterministic framework, the blind techniques...

  15. Multibody systems handbook

    Energy Technology Data Exchange (ETDEWEB)

    Schiehlen, W. (Univ. Stuttgart (DE))

    1990-01-01

    Dynamics of multibody systems is of importance in the fields of robotics, biomechanics, spacecraft control, road and rail vehicle design, and dynamics of machinery. Many research problems have been solved and a considerable number of computer codes based on multibody formalisms is now available. This book reports on software systems for multibody system dynamics which are established and have found acceptance in the users community.

  16. Heat Pipe Systems

    Science.gov (United States)

    1988-01-01

    Solar Fundamentals, Inc.'s hot water system employs space-derived heat pipe technology. It is used by a meat packing plant to heat water for cleaning processing machinery. Unit is complete system with water heater, hot water storage, electrical controls and auxiliary components. Other than fans and a circulating pump, there are no moving parts. System's unique design eliminates problems of balancing, leaking, corroding, and freezing.

  17. Systems Integration Challenges for a National Space Launch System

    Science.gov (United States)

    May, Todd A.

    2011-01-01

    System Integration was refined through the complexity and early failures experienced in rocket flight. System Integration encompasses many different viewpoints of the system development. System Integration must ensure consistency in development and operations activities. Human Space Flight tends toward large, complex systems. Understanding the system fs operational and use context is the guiding principle for System Integration: (1) Sizeable costs can be driven into systems by not fully understanding context (2). Adhering to the system context throughout the system fs life cycle is essential to maintaining efficient System Integration. System Integration exists within the System Architecture. Beautiful systems are simple in use and operation -- Block upgrades facilitate manageable steps in functionality evolution. Effective System Integration requires a stable system concept. Communication is essential to system simplicity

  18. Data-acquisition systems

    Energy Technology Data Exchange (ETDEWEB)

    Cyborski, D.R.; Teh, K.M.

    1995-08-01

    Up to now, DAPHNE, the data-acquisition system developed for ATLAS, was used routinely for experiments at ATLAS and the Dynamitron. More recently, the Division implemented 2 MSU/DAPHNE systems. The MSU/DAPHNE system is a hybrid data-acquisition system which combines the front-end of the Michigan State University (MSU) DA system with the traditional DAPHNE back-end. The MSU front-end is based on commercially available modules. This alleviates the problems encountered with the DAPHNE front-end which is based on custom designed electronics. The first MSU system was obtained for the APEX experiment and was used there successfully. A second MSU front-end, purchased as a backup for the APEX experiment, was installed as a fully-independent second MSU/DAPHNE system with the procurement of a DEC 3000 Alpha host computer, and was used successfully for data-taking in an experiment at ATLAS. Additional hardware for a third system was bought and will be installed. With the availability of 2 MSU/DAPHNE systems in addition to the existing APEX setup, it is planned that the existing DAPHNE front-end will be decommissioned.

  19. DCS Budget Tracking System

    Data.gov (United States)

    Social Security Administration — DCS Budget Tracking System database contains budget information for the Information Technology budget and the 'Other Objects' budget. This data allows for monitoring...

  20. Systems dependability assessment

    CERN Document Server

    Aubry, Jean-François

    2015-01-01

    Presents recent developments of probabilistic assessment of systems dependability based on stochastic models, including graph theory, finite state automaton and language theory, for both dynamic and hybrid contexts.

  1. Understanding radar systems

    CERN Document Server

    Kingsley, Simon

    1999-01-01

    What is radar? What systems are currently in use? How do they work? This book provides engineers and scientists with answers to these critical questions, focusing on actual radar systems in use today. It is a perfect resource for those just entering the field, or as a quick refresher for experienced practitioners. The book leads readers through the specialized language and calculations that comprise the complex world of radar engineering as seen in dozens of state-of-the-art radar systems. An easy to read, wide ranging guide to the world of modern radar systems.

  2. Laser security systems

    Science.gov (United States)

    Kolev, Ivan S.; Stoeva, Ivelina S.

    2004-06-01

    This report presents the development of single-beam barrier laser security system. The system utilizes the near infrared (IR) range λ=(850-900)nm. The security system consists of several blocks: Transmitter; Receiver; Logical Unit; Indication; Power Supply. There are four individually software programmable security zones Z1 - Z4. The control logic is implemented on a PIC16F84 MCU. The infrared beam is a pulse pack, coded and modulated in the transmitter with frequency of 36 kHz. The receiver demodulates and decodes the beam. The software for the MCU is developed along with the electrical circuits of the security system.

  3. Photovoltaic systems overview

    Science.gov (United States)

    Hesse, J. L.

    1981-01-01

    Selected photovoltaic systems currently under user-environment field test by the U.S. Department of Energy Photovoltaics Program are discussed, and operational results are summarized. There are many systems in the stand-alone sector that are cost effective now. As proven products become available, distributed residential, commercial, institutional and industrial on-site systems should be able to displace significant amounts of centrally-generated electricity throughout most of the United States. Finally, utilities should ultimately be able to augment their generating capacity with larger-scale systems. Field experience and industry interface has led to excellent overall product performance.

  4. Facility Environmental Management System

    Data.gov (United States)

    Federal Laboratory Consortium — This is the Web site of the Federal Highway Administration's (FHWA's) Turner-Fairbank Highway Research Center (TFHRC) facility Environmental Management System (EMS)....

  5. Systemic risk measures

    Science.gov (United States)

    Guerra, Solange Maria; Silva, Thiago Christiano; Tabak, Benjamin Miranda; de Souza Penaloza, Rodrigo Andrés; de Castro Miranda, Rodrigo César

    2016-01-01

    In this paper we present systemic risk measures based on contingent claims approach and banking sector multivariate density. We also apply network measures to analyze bank common risk exposure. The proposed measures aim to capture credit risk stress and its potential to become systemic. These indicators capture not only individual bank vulnerability, but also the stress dependency structure between them. Furthermore, these measures can be quite useful for identifying systemically important banks. The empirical results show that these indicators capture with considerable fidelity the moments of increasing systemic risk in the Brazilian banking sector in recent years.

  6. Precision volume measurement system.

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Erin E.; Shugard, Andrew D.

    2004-11-01

    A new precision volume measurement system based on a Kansas City Plant (KCP) design was built to support the volume measurement needs of the Gas Transfer Systems (GTS) department at Sandia National Labs (SNL) in California. An engineering study was undertaken to verify or refute KCP's claims of 0.5% accuracy. The study assesses the accuracy and precision of the system. The system uses the ideal gas law and precise pressure measurements (of low-pressure helium) in a temperature and computer controlled environment to ratio a known volume to an unknown volume.

  7. Policy Feedback System (PFS)

    Data.gov (United States)

    Social Security Administration — The Policy Feedback System (PFS) is a web application developed by the Office of Disability Policy Management Information (ODPMI) team that gathers empirical data...

  8. National Airspace System Resources

    Data.gov (United States)

    Department of Transportation — National Airspace System Resources (NASR) maintains the national aeronautical information database, containing static data related to NAS facilities and operations....

  9. Remote Systems Design & Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Sharon A.; Baker, Carl P.; Valdez, Patrick LJ

    2009-08-28

    The Pacific Northwest National Laboratory (PNNL) was tasked by Washington River Protection Solutions, LLC (WRPS) to provide information and lessons learned relating to the design, development and deployment of remote systems, particularly remote arm/manipulator systems. This report reflects PNNL’s experience with remote systems and lays out the most important activities that need to be completed to successfully design, build, deploy and operate remote systems in radioactive and chemically contaminated environments. It also contains lessons learned from PNNL’s work experiences, and the work of others in the national laboratory complex.

  10. SYSTEMS WITH COMPLEXITY

    Institute of Scientific and Technical Information of China (English)

    WANG Chenghong; ZHANG Lijun

    2004-01-01

    Science of Complexity is a newly emerging branch of natural scienceAlthoughwe still haven't a precise definition, there are some principles for justifying whether a systemis a complex systemThe purpose of this article is to reveal some of such principlesOnthe basis of them, the concept of a system with complexity is proposedThey may helpus to distinguish a real complex system from complicated objects in common senseThenwe propose some fundamental problems faced by the study of systems with complexity.

  11. Inspection management system

    Energy Technology Data Exchange (ETDEWEB)

    Coto, L.F.M.; Alvarez, M.A.L.

    1998-07-01

    The main features of the application developed by UNION FENOSA and NorControl for inspection management are exposed. This application has been built on the basis of a Geographic Information System, whose advantages on other database systems are explained. This system, has been developed with the main objective of getting a better and easier utilization of the data collected from the inspections, in order to reduce service failures and obtain a bigger return of the effort invested in them. They are also exposed the work line and the steps followed for the implementation of the system in the Meirama steam plant, and the results obtained up to date.

  12. Aerospace Systems Monitor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Proposal Title: Aerospace Systems Monitor PHASE 1 Technical Abstract: This Phase II STTR project will continue development and commercialization of the Aerospace...

  13. Aeronautical Information System Replacement

    Data.gov (United States)

    Department of Transportation — Aeronautical Information System Replacement is a web-enabled, automation means for the collection and distribution of Service B messages, weather information, flight...

  14. Questions and information systems

    CERN Document Server

    Lauer, Thomas W; Graesser, Arthur C

    2013-01-01

    The design and functioning of an information system improve to the extent that the system can handle the questions people ask. Surprisingly, however, researchers in the cognitive, computer, and information sciences have not thoroughly examined the multitude of relationships between information systems and questions -- both question asking and answering. The purpose of this book is to explicitly examine these relationships. Chapter contributors believe that questions play a central role in the analysis, design, and use of different kinds of natural or artificial information systems such as huma

  15. Tactical Systems Integration Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Tactical Systems Integration Laboratory is used to design and integrate computer hardware and software and related electronic subsystems for tactical vehicles....

  16. Frustrated spin systems

    CERN Document Server

    2013-01-01

    This book covers all principal aspects of currently investigated frustrated systems, from exactly solved frustrated models to real experimental frustrated systems, going through renormalization group treatment, Monte Carlo investigation of frustrated classical Ising and vector spin models, low-dimensional systems, spin ice and quantum spin glass. The reader can - within a single book - obtain a global view of the current research development in the field of frustrated systems.This new edition is updated with recent theoretical, numerical and experimental developments in the field of frustrated

  17. Introduction to fuzzy systems

    CERN Document Server

    Chen, Guanrong

    2005-01-01

    Introduction to Fuzzy Systems provides students with a self-contained introduction that requires no preliminary knowledge of fuzzy mathematics and fuzzy control systems theory. Simplified and readily accessible, it encourages both classroom and self-directed learners to build a solid foundation in fuzzy systems. After introducing the subject, the authors move directly into presenting real-world applications of fuzzy logic, revealing its practical flavor. This practicality is then followed by basic fuzzy systems theory. The book also offers a tutorial on fuzzy control theory, based mainly on th

  18. Endocrine system: part 1.

    Science.gov (United States)

    Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

    2014-05-27

    This article, which forms part of the life sciences series and is the first of two articles on the endocrine system, examines the structure and function of the organs of the endocrine system. It is important that nurses understand how the endocrine system works and its role in maintaining health. The role of the endocrine system and the types, actions and control of hormones are explored. The gross structure of the pituitary and thyroid glands are described along with relevant physiology. Several disorders of the thyroid gland are outlined. The second article examines growth hormone, the pancreas and adrenal glands.

  19. Smart Distribution Systems

    Directory of Open Access Journals (Sweden)

    Yazhou Jiang

    2016-04-01

    Full Text Available The increasing importance of system reliability and resilience is changing the way distribution systems are planned and operated. To achieve a distribution system self-healing against power outages, emerging technologies and devices, such as remote-controlled switches (RCSs and smart meters, are being deployed. The higher level of automation is transforming traditional distribution systems into the smart distribution systems (SDSs of the future. The availability of data and remote control capability in SDSs provides distribution operators with an opportunity to optimize system operation and control. In this paper, the development of SDSs and resulting benefits of enhanced system capabilities are discussed. A comprehensive survey is conducted on the state-of-the-art applications of RCSs and smart meters in SDSs. Specifically, a new method, called Temporal Causal Diagram (TCD, is used to incorporate outage notifications from smart meters for enhanced outage management. To fully utilize the fast operation of RCSs, the spanning tree search algorithm is used to develop service restoration strategies. Optimal placement of RCSs and the resulting enhancement of system reliability are discussed. Distribution system resilience with respect to extreme events is presented. Test cases are used to demonstrate the benefit of SDSs. Active management of distributed generators (DGs is introduced. Future research in a smart distribution environment is proposed.

  20. Stability of dynamical systems

    CERN Document Server

    Liao, Xiaoxin; Yu, P 0

    2007-01-01

    The main purpose of developing stability theory is to examine dynamic responses of a system to disturbances as the time approaches infinity. It has been and still is the object of intense investigations due to its intrinsic interest and its relevance to all practical systems in engineering, finance, natural science and social science. This monograph provides some state-of-the-art expositions of major advances in fundamental stability theories and methods for dynamic systems of ODE and DDE types and in limit cycle, normal form and Hopf bifurcation control of nonlinear dynamic systems.ʺ Presents

  1. OGIS Access System

    Data.gov (United States)

    National Archives and Records Administration — The OGIS Access System (OAS) provides case management, stakeholder collaboration, and public communications activities including a web presence via a web portal.

  2. Automated Budget System

    Data.gov (United States)

    Department of Transportation — The Automated Budget System (ABS) automates management and planning of the Mike Monroney Aeronautical Center (MMAC) budget by providing enhanced capability to plan,...

  3. Solar energy conversion systems

    CERN Document Server

    Brownson, Jeffrey R S

    2013-01-01

    Solar energy conversion requires a different mind-set from traditional energy engineering in order to assess distribution, scales of use, systems design, predictive economic models for fluctuating solar resources, and planning to address transient cycles and social adoption. Solar Energy Conversion Systems examines solar energy conversion as an integrative design process, applying systems thinking methods to a solid knowledge base for creators of solar energy systems. This approach permits different levels of access for the emerging broad audience of scientists, engineers, architects, planners

  4. Scalable Content Management System

    Directory of Open Access Journals (Sweden)

    Sandeep Krishna S, Jayant Dani

    2013-10-01

    Full Text Available Immense growth in the volume of contents every day demands more scalable system to handle and overcome difficulties in capture, storage, transform, search, sharing and visualization of data, where the data can be a structured or unstructured data of any type. A system to manage the growing contents and overcome the issues and complexity faced using appropriate technologies would advantage over measurable qualities like flexibility, interoperability, customizability, security, auditability, quality, community support, options and cost of licensing. So architecting aContent Management System in terms of enterprise needs and a scalable solution to manage the huge data growth necessitates a Scalable Content Management System.

  5. Pro Python System Administration

    CERN Document Server

    Sileika, R

    2010-01-01

    As time goes on, system administrators are presented with increasingly complicated challenges. In the early days, a team of engineers might have had to look after one or two systems. These days, one engineer can administer hundreds or thousands of systems. System administrators are gradually replacing their tools with more advanced and flexible ones. One of the choices is Python. Structurally, Python is a modern, high-level language with a very clean syntax. Python comes with many built-in libraries that can make automation tasks easier. It also has extensive set of third-party libraries and a

  6. Nonlinear Hamiltonian systems

    DEFF Research Database (Denmark)

    Jørgensen, Michael Finn

    1995-01-01

    It is generally very difficult to solve nonlinear systems, and such systems often possess chaotic solutions. In the rare event that a system is completely solvable, it is said to integrable. Such systems never have chaotic solutions. Using the Inverse Scattering Transform Method (ISTM) two......-dimensional defocusing Nonlinear Schroedinger (NLS) equation are studied analytically and numerically. It is found that no bound states exist. When the initial condition is a dark ring on a background of finite amplitude, the ring initially shrinks until the curvature effects become dominant, forcing the ring to expand...

  7. Engineered Natural Systems Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — With its pressure vessels that simulate the pressures and temperatures found deep underground, NETL’s Engineered Natural Systems Laboratory in Pittsburgh, PA, gives...

  8. Remote Maintenance Monitoring System -

    Data.gov (United States)

    Department of Transportation — The Remote Maintenance and Monitoring System (RMMS) is a collection of subsystems that includes telecommunication components, hardware, and software, which serve to...

  9. Embedded systems handbook

    CERN Document Server

    Zurawski, Richard

    2005-01-01

    Embedded systems are nearly ubiquitous, and books on individual topics or components of embedded systems are equally abundant. Unfortunately, for those designers who thirst for knowledge of the big picture of embedded systems there is not a drop to drink. Until now. The Embedded Systems Handbook is an oasis of information, offering a mix of basic and advanced topics, new solutions and technologies arising from the most recent research efforts, and emerging trends to help you stay current in this ever-changing field.With preeminent contributors from leading industrial and academic institutions

  10. Enumeration Verification System (EVS)

    Data.gov (United States)

    Social Security Administration — EVS is a batch application that processes for federal, state, local and foreign government agencies, private companies and internal SSA customers and systems. Each...

  11. Digestive system; Appareil digestif

    Energy Technology Data Exchange (ETDEWEB)

    Moureau-Zabotto, L.; Touboul, E.; Lerouge, D.; Deniaud-Alexandre, E.; Grahek, D.; Foulquier, J.N.; Petegnief, Y.; Gres, B.; El Balaa, H.; Keraudy, K.; Servagi-Vernat, S.S.; Lorchel, F.L.; Crehange, G.C.; Miny, J.M.; Bosset, J.F.B.; Mineur, L.; Chastel, D.; Combescure, C.; Guillot, N.; Garcia, R.; Reboul, F.; Huguet, F.; Andre, T.; Hammel, P.; Artru, P.; Balosso, J.; Ruszniewski, P.; Touboul, E.; Gramont, A. de; Louvet, C.; Moretti, L.; Meert, N.; Magne, N.; Daisne, J.F.; Berben, D.; Bral, S.; Alen, R.; Van Cleef, A.; Florescu, C.; Henry-Amar, M.; Jacob, J.; Ollivier, J.M.; Gallais, M.P.; Guillois, J.M.; Vie, B.; Tournier-Rangeard, L.; Mercier, M.; Gerard, J.P.; Ducreux, M.; Lemanski, C.; Francois, E.; Giovannini, M.; Cvitkovic, F.; Mirabel, X.; Peiffert, D

    2005-11-15

    Seven articles concern the digestive system cancer, mixing of images, toxicity of the chemoradiotherapy, comparison of dosimetry tools, pancreas cancer, rectum cancer, treated by chemoradiotherapy. (N.C.)

  12. Delphi Interface Maintenance System -

    Data.gov (United States)

    Department of Transportation — DIMS is the primary financial information system for tracking federally funded highway projects. It tracks authorizations, obligations, apportionments, allocations,...

  13. Jupiter System Observer

    Science.gov (United States)

    Senske, Dave; Kwok, Johnny

    2008-01-01

    This slide presentation reviews the proposed mission for the Jupiter System Observer. The presentation also includes overviews of the mission timeline, science goals, and spacecraftspecifications for the satellite.

  14. Hybrid systems with constraints

    CERN Document Server

    Daafouz, Jamal; Sigalotti, Mario

    2013-01-01

    Control theory is the main subject of this title, in particular analysis and control design for hybrid dynamic systems.The notion of hybrid systems offers a strong theoretical and unified framework to cope with the modeling, analysis and control design of systems where both continuous and discrete dynamics interact. The theory of hybrid systems has been the subject of intensive research over the last decade and a large number of diverse and challenging problems have been investigated. Nevertheless, many important mathematical problems remain open.This book is dedicated mainly to

  15. Dual cure photocatalyst systems

    Energy Technology Data Exchange (ETDEWEB)

    DeVoe, R.J.; Brown-Wensley, K.A.; Holmes, G.L.; Mathis, M.D.; McCormick, F.B.; Palazzotto, M.C.; Spurgeon, K.M. (Minnesota Mining and Mfg. Co., St. Paul, MN (USA). Corporate Research Labs.)

    1990-01-01

    A family of dual cure photocatalyst systems is being developed to be used in the solventless processing of organic coatings. The photocatalyst systems consist of organometallic compounds often in combination with other agents. Upon photolysis, the photocatalyst system generates a Lewis acid and a free radical. The Lewis acid can initiate the polymerization of epoxies or the addition of isocyanates and polyols to form polyurethanes while the free radical can initiate the polymerization of acrylates. The performance of the various photocatalyst systems will be compared on the basis of the physical properties of the cured compositions they produce. 17 figs.

  16. Exploring the solar system

    CERN Document Server

    Bond, Peter

    2012-01-01

    The exploration of our solar system is one of humanity's greatest scientific achievements. The last fifty years in particular have seen huge steps forward in our understanding of the planets, the sun, and other objects in the solar system. Whilst planetary science is now a mature discipline - involving geoscientists, astronomers, physicists, and others - many profound mysteries remain, and there is indeed still the tantalizing possibility that we may find evidence of life on another planet in our system.Drawing upon the latest results from the second golden age of Solar System exploration, aut

  17. Control systems engineering

    CERN Document Server

    Nise, Norman S

    1995-01-01

    This completely updated new edition shows how to use MATLAB to perform control-system calculations. Designed for the professional or engineering student who needs a quick and readable update on designing control systems, the text features a series of tightly focused examples that clearly illustrate each concept of designing control systems. Most chapters conclude with a detailed application from the two case studies that run throughout the book: an antenna asimuth control system and a submarine. The author also refers to many examples of design methods.

  18. MASTER TELEVISION ANTENNA SYSTEM.

    Science.gov (United States)

    Rhode Island State Dept. of Education, Providence.

    SPECIFICATIONS FOR THE FURNISHING AND INSTALLATION OF TELEVISION MASTER ANTENNA SYSTEMS FOR SECONDARY AND ELEMENTARY SCHOOLS ARE GIVEN. CONTRACTOR REQUIREMENTS, EQUIPMENT, PERFORMANCE STANDARDS, AND FUNCTIONS ARE DESCRIBED. (MS)

  19. Observing farming systems

    DEFF Research Database (Denmark)

    Noe, Egon; Alrøe, Hugo Fjelsted

    2012-01-01

    In Denmark, agriculture is becoming increasingly specialised, and more and more actors are becoming involved in farm decision making. These trends are more or less pronounced in other European countries as well. We therefore find that to understand modern farming systems, we have to shift the focus...... of analysis from individual farmers to communication and social relations. This is where Luhmann’s social systems theory can offer new insights. Firstly, it can help observe and understand the operational closure and system logic of a farming system and how this closure is produced and reproduced. Secondly...

  20. Aerosol Observation System

    Data.gov (United States)

    Oak Ridge National Laboratory — The aerosol observation system (AOS) is the primary Atmospheric Radiation Measurement (ARM) platform for in situ aerosol measurements at the surface. The principal...

  1. Changeability of production management systems

    NARCIS (Netherlands)

    Hoogenraad, M. S.; Wortmann, J. C.; Olhager, J; Persson, F

    2007-01-01

    Modem production management systems consist of transaction processing systems and decision enhancement systems. A clear example of two such components are an ERP systems and APS systems. These systems are often standard software systems, and therefore suitable for many different situations. This pap

  2. Pungency in Capsicum chinense: variation among countries of origin.

    Science.gov (United States)

    Antonious, George F; Berke, Terry; Jarret, Robert L

    2009-02-01

    Fruits of 63 accessions of Capsicum chinense Jacq. from the USDA/ARS Capsicum germplasm collection were analyzed for two major capsaicinoids, capsaicin and dihydrocapsaicin, using gas chromatography with nitrogen phosphorus detection (GC/NPD). The objectives of the present investigation were: (i) to quantify the major capsaicinoids (capsaicin and dihydrocapsaicin) in fruits of Capsicum chinense accessions and (ii) to identify accessions containing great concentrations of capsaicinoids among countries of hot pepper origin. Seeds of C. chinense accessions received from Belize, Brazil, Colombia, Ecuador, Mexico, Peru, Puerto Rico, and United States were field grown in a silty-loam soil. Mature fruits were analyzed for major capsaicinoids content. Capsaicin concentrations were generally greater than dihydrocapsaicin. Fruits of C. chinense accession PI640900 (USA) contained the greatest concentration of capsaicin (1.52 mg g(- 1) fruit) and dihydrocapsaicin (1.16 mg g(- 1) fruit), while total major capsaicinoids in the fruits of PI438648 (Mexico) averaged 2 mg g(- 1) fruit. These two accessions were identified as potential candidates for mass production of major capsaicinoids that have health-promoting properties and for use as a source of pest control agents in agricultural fields.

  3. Identification of gene-specific polymorphisms and association with capsaicin pathway metabolites in Capsicum annuum L. collections.

    Science.gov (United States)

    Reddy, Umesh K; Almeida, Aldo; Abburi, Venkata L; Alaparthi, Suresh Babu; Unselt, Desiree; Hankins, Gerald; Park, Minkyu; Choi, Doil; Nimmakayala, Padma

    2014-01-01

    Pepper (Capsicum annuum L.) is an economically important crop with added nutritional value. Production of capsaicin is an important quantitative trait with high environmental variance, so the development of markers regulating capsaicinoid accumulation is important for pepper breeding programs. In this study, we performed association mapping at the gene level to identify single nucleotide polymorphisms (SNPs) associated with capsaicin pathway metabolites in a diverse Capsicum annuum collection during two seasons. The genes Pun1, CCR, KAS and HCT were sequenced and matched with the whole-genome sequence draft of pepper to identify SNP locations and for further characterization. The identified SNPs for each gene underwent candidate gene association mapping. Association mapping results revealed Pun1 as a key regulator of major metabolites in the capsaicin pathway mainly affecting capsaicinoids and precursors for acyl moieties of capsaicinoids. Six different SNPs in the promoter sequence of Pun1 were found associated with capsaicin in plants from both seasons. Our results support that CCR is an important control point for the flux of p-coumaric acid to specific biosynthesis pathways. KAS was found to regulate the major precursors for acyl moieties of capsaicinoids and may play a key role in capsaicinoid production. Candidate gene association mapping of Pun1 suggested that the accumulation of capsaicinoids depends on the expression of Pun1, as revealed by the most important associated SNPs found in the promoter region of Pun1.

  4. Distribution management system

    Energy Technology Data Exchange (ETDEWEB)

    Verho, P.; Kaerenlampi, M.; Pitkaenen, M.; Jaerventausta, P.; Partanen, J.

    1997-12-31

    This report comprises a general description of the results obtained in the research projects `Information system applications of a distribution control center`, `Event analysis in primary substation`, and `Distribution management system` of the EDISON research program during the years of 1993 - 1997. The different domains of the project are presented in more detail in other reports. An operational state analysis of a distribution network has been made from the control center point of view and the functions which can not be solved by a conventional SCADA system are determined. The basis for new computer applications is shown to be integration of the computer systems. The main result of the work is a distribution management system (DMS), which is an autonomous system integrated to the existing information systems, SCADA and AM/FM/GIS. The system uses a large number of modelling and computation methods and provides an extensive group of advanced functions to support the distribution network monitoring, fault management, operations planning and optimization. The development platform of the system consists of a Visual C++ programming environment, Windows NT operating system and PC. During the development the DMS has been tested in a pilot utility and it is nowadays in practical use in several Finnish utilities. The use of a DMS improves the quality and economy of power supply in many ways; the outage times can, in particular, be reduced using the system. Based on the achieved experiences some parts of the DMS reached the commercialization phase, too. Initially the commercial products were developed by a software company, Versoft Oy. At present the research results are the basis of a worldwide software product supplied by ABB Transmit Co. (orig.) EDISON Research Programme. 28 refs.

  5. Power system applications for PASC converter systems

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, M.K. [Pacific Northwest Lab., Richland, WA (United States); Johnson, R.M. [Montana State Univ., Bozeman, MT (United States)

    1994-04-01

    This paper shows, using computer EMTP simulations, some preliminary results of applying pulse amplitude synthesis and control (PASC) technology to single-source level voltage converter system. The method can be applied to any single terminal pair source with appropriate modifications in power extraction interface and computer control program to match source and load impedance characteristics. The PASC realization as discussed here employs banks of transformers, one bank per phase, in which the primaries are connected in parallel through a switch matrix to the dc source. Two opposite polarity primaries per transformer are pulsed alternatively in time to produce an oscillatory sinusoidal output waveform. PASC conversion system capabilities to produce both leading and lagging power factor power output in single-phase and three-phase {Delta} or Y configurations are illustrated. EMTP simulations are used to demonstrate the converter capabilities. Also included are discussions regarding harmonics and potential control strategies to adapt the converter to an application or to minimize harmonics.

  6. Data management system DIU test system

    Science.gov (United States)

    1976-01-01

    An operational and functional description is given of the data management system. Descriptions are included for the test control unit, analog stimulus panel, discrete stimulus panel, and the precision source. The mechanical configuration is defined and illustrated to provide card and component location for modification or repair. The unit level interfaces are mirror images of the DIU interfaces and are described in the Final Technical Report for NASA-MSFC contract NAS8-29155.

  7. A master system for power system fault phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Myung Ho; Jang, Sang Ho; Hong, Joon Hee; Min, Wan Ki; Yoo, Chang Hwan [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

    1995-12-31

    This report includes as follows - Real time digital simulator - Remote measuring, analyzing and reproducing system of power system fault data -Power system reduction method program using EMTP -Test system for protection device. (author). 22 refs., 38 figs.

  8. Auxiliary DCP data acquisition system. [airborne system

    Science.gov (United States)

    Snyder, R. V.

    1975-01-01

    An airborne DCP Data Aquisition System has been designed to augment the ERTS satellite data recovery system. The DCP's are data collection platforms located at pertinent sites. With the appropriate sensors they are able to collect, digitally encode and transmit environmental parameters to the ERTS satellite. The satellite in turn relays these transmissions to a ground station for processing. The satellite is available for such relay duty a minimum of two times in a 24-hour period. The equipment is to obtain continuous DCP data during periods of unusual environmental activity--storms, floods, etc. Two circumstances contributed to the decision to design such a system; (1) Wallops Station utilizes surveillance aircraft in support of rocket launches and also in support of earth resources activities; (2) the area in which Wallops is located, the Delaware and Chesapeake Bay areas, are fertile areas for DCP usage. Therefore, by developing an airborne DCP receiving station and installing it on aircraft more continuous DCP data can be provided from sites in the surrounding areas at relatively low cost.

  9. Water quality management system; Suishitsu kanri system

    Energy Technology Data Exchange (ETDEWEB)

    Tsugura, H.; Hanawa, T.; Hatano, K.; Fujiu, M. [Meidensha Corp., Tokyo (Japan)

    1997-12-19

    Water quality management system designed in consideration of compliance with the environmental ISO is outlined. The water quality management system is positioned at the center, connected to water quality monitors that are deployed at various parts of the water supply facility, and performs the real-time display of information about water quality and the operating status of the water quality monitors for every one of the monitoring locations. The communication software run on this system supports 30 water quality monitors and performs uninterrupted surveillance using dedicated lines. It can also use public lines for periodic surveillance. Errors in communication if any are remedied automatically. A pipeline diagnosing/estimating function is provided, which utilizes water quality signals from received water quality monitors for estimating the degree of corrosion of pipelines in the pipeline network. Another function is provided of estimating water quality distribution throughout the pipeline network, which determines the residual chlorine concentration, conductivity, pH level, water temperature, etc., for every node in the pipeline network. A third function estimates water quality indexes, evaluating the trihalomethane forming power through measuring the amounts of low-concentration organic matters and utilizing signals from low-concentration UV meters in the water purification process. 3 refs., 7 figs.

  10. Human-system Interfaces for Automatic Systems

    Energy Technology Data Exchange (ETDEWEB)

    OHara, J.M.; Higgins,J. (BNL); Fleger, S.; Barnes V. (NRC)

    2010-11-07

    Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, our study identified several topics for additional research.

  11. Cybernetic anthropomorphic machine systems

    Science.gov (United States)

    Gray, W. E.

    1974-01-01

    Functional descriptions are provided for a number of cybernetic man machine systems that augment the capacity of normal human beings in the areas of strength, reach or physical size, and environmental interaction, and that are also applicable to aiding the neurologically handicapped. Teleoperators, computer control, exoskeletal devices, quadruped vehicles, space maintenance systems, and communications equipment are considered.

  12. Dynamics of Information Systems

    CERN Document Server

    Hirsch, Michael J; Murphey, Robert

    2010-01-01

    Our understanding of information and information dynamics has outgrown classical information theory. This book presents the research explaining the importance of information in the evolution of a distributed or networked system. It presents techniques for measuring the value or significance of information within the context of a system

  13. Distributed operating systems

    NARCIS (Netherlands)

    Mullender, Sape J.

    1987-01-01

    In the past five years, distributed operating systems research has gone through a consolidation phase. On a large number of design issues there is now considerable consensus between different research groups. In this paper, an overview of recent research in distributed systems is given. In turn, th

  14. Forest Resource Information System

    Science.gov (United States)

    Mrocznyski, R. P.

    1983-01-01

    Twenty-three processing functions aid in utilizing LANDSAT data for forest resource management. Designed to work primarily with digital data obtained from measurements recorded by multispectral remote sensors mounted on aerospace platforms. communication between processing functions, simplicity of control, and commonality of data files in LARSFRIS enhance usefulness of system as tool for research and development of remote sensing systems.

  15. Rainwater Harvesting Systems

    OpenAIRE

    Ling, Erin; Benham, Brian Leslie, 1960-

    2014-01-01

    A properly designed, constructed, and maintained rainwater harvesting system can provide supplemental water in water-stressed areas and reduce downstream management and treatment. This publication reviews what rainwater harvesting is, why you would want to, and types of rainwater systems.

  16. Purge water management system

    Science.gov (United States)

    Cardoso-Neto, Joao E.; Williams, Daniel W.

    1996-01-01

    A purge water management system for effectively eliminating the production of purge water when obtaining a groundwater sample from a monitoring well. In its preferred embodiment, the purge water management system comprises an expandable container, a transportation system, and a return system. The purge water management system is connected to a wellhead sampling configuration, typically permanently installed at the well site. A pump, positioned with the monitoring well, pumps groundwater through the transportation system into the expandable container, which expands in direct proportion with volume of groundwater introduced, usually three or four well volumes, yet prevents the groundwater from coming into contact with the oxygen in the air. After this quantity of groundwater has been removed from the well, a sample is taken from a sampling port, after which the groundwater in the expandable container can be returned to the monitoring well through the return system. The purge water management system prevents the purge water from coming in contact with the outside environment, especially oxygen, which might cause the constituents of the groundwater to oxidize. Therefore, by introducing the purge water back into the monitoring well, the necessity of dealing with the purge water as a hazardous waste under the Resource Conservation and Recovery Act is eliminated.

  17. Persuasiveness of expert systems

    NARCIS (Netherlands)

    Dijkstra, JJ; Liebrand, WBG; Timminga, E; Liebrand, Wim B.G.

    1998-01-01

    Expert system advice is not always evaluated by examining its contents. Users can be persuaded by expert system advice because they have certain beliefs about advice given by a computer. The experiment in this paper shows that subjects (n = 84) thought that, given the same argumentation, expert syst

  18. Local positioning system

    Energy Technology Data Exchange (ETDEWEB)

    Kyker, R.

    1995-07-25

    Navigation systems have been vital to transportation ever since man took to the air and sea. Early navigation systems utilized the sextant to navigate by starlight as well as the magnetic needle compass. As electronics and communication technologies improved, inertial navigation systems were developed for use in ships and missile delivery. These systems consisted of electronic compasses, gyro-compasses, accelerometers, and various other sensors. Recently, systems such as LORAN and the Global Positioning System (GPS) have utilized the properties of radio wave propagation to triangulate position. The Local Positioning System (LPS), described in this paper, is an implementation of a limited inertial navigation system designed to be used on a bicycle. LPS displays a cyclist`s current position relative to a starting location. This information is displayed in Cartesian-like coordinates. To accomplish this, LPS relies upon two sensors, an electronic compass sensor and a distance sensor. The compass sensor provides directional information while the distance sensor provides the distance traveled. This information yields a distance vector for each point in time which when summed produces the cyclist`s current position. LPS is microprocessor controlled and is designed for a range of less than 90 miles.

  19. Reaction systems with precipitation

    Directory of Open Access Journals (Sweden)

    Marek Rogalski

    2015-04-01

    Full Text Available This article proposes expanding Reaction Systems of Ehrenfeucht and Rozenberg by incorporating precipitation reactions into it. This improves the computing power of Reaction Systems by allowing us to implement a stack. This addition enables us to implement a Deterministic Pushdown Automaton.

  20. Distributed System Evaluation

    Science.gov (United States)

    1990-07-01

    computers. If a distributed operating system is designed with aschrony in mind efficient usage of overall system resources can be employed through the...the complex problem of efficiently balancing CPU, disk, and communications resource usage in the distributed environment mast be solved by the...throughput (concuirent processing capability), survivability and availabilty , and finally interprocess communication. In measuning the concurrent

  1. Management Systems in Education.

    Science.gov (United States)

    Wagner, Ivan D.

    Management systems have been adapted for educational administration in response to the need for quality of educational opportunity, collective bargaining, school district consolidation, decreasing enrollments, accountability laws, limited financial resources, and participatory decision-making. Management systems adapted, not adopted, from business…

  2. Mission Medical Information System

    Science.gov (United States)

    Johnson-Throop, Kathy A.; Joe, John C.; Follansbee, Nicole M.

    2008-01-01

    This viewgraph presentation gives an overview of the Mission Medical Information System (MMIS). The topics include: 1) What is MMIS?; 2) MMIS Goals; 3) Terrestrial Health Information Technology Vision; 4) NASA Health Information Technology Needs; 5) Mission Medical Information System Components; 6) Electronic Medical Record; 7) Longitudinal Study of Astronaut Health (LSAH); 8) Methods; and 9) Data Submission Agreement (example).

  3. Mobile Student Information System

    Science.gov (United States)

    Asif, Muhammad; Krogstie, John

    2011-01-01

    Purpose: A mobile student information system (MSIS) based on mobile computing and context-aware application concepts can provide more user-centric information services to students. The purpose of this paper is to describe a system for providing relevant information to students on a mobile platform. Design/methodology/approach: The research…

  4. Information system metaphors

    NARCIS (Netherlands)

    Gazendam, Henk W.M.

    1999-01-01

    Metaphors are useful because they are efficient: they transfer a complex of meaning in a few words. Information systems are social constructs. Therefore, metaphors seem to be especially useful for explaining the space of possible meaning complexes or designs of information systems. Three information

  5. Secure Disk Mixed System

    Directory of Open Access Journals (Sweden)

    Myongchol Ri

    2013-01-01

    Full Text Available We propose a disk encryption method, called Secure Disk Mixed System (SDMS in this paper, for data protection of disk storages such as USB flash memory, USB hard disk and CD/DVD. It is aimed to solve temporal and spatial limitations of existing disk encryption methods and to control security performance flexibly according to the security requirement of system.

  6. Family systems and fertility

    NARCIS (Netherlands)

    Moenkediek, Bastian

    2016-01-01

    This thesis studies the role of regional family organization principles, so called family systems, for explaining fertility behaviours in different parts of Europe. Studying family systems and its impact on fertility is important, because many aspects of societal life, such as the organization of we

  7. Multiplex editing system

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention relates to a multiplex editing system. The system allows multiple editing of nucleic acid sequences such as genomic sequences, such as knockins of genes of interest in a genome, knockouts of genomic sequences and/or allele replacement. Also provided herein are a method...... for editing nucleic acids and a cell comprising a stably integrated endonuclease....

  8. Integrated Information Systems

    Directory of Open Access Journals (Sweden)

    Annika Moscati

    2012-11-01

    Full Text Available Currently in the field of management, enhancement, territory and cultural heritage analysis, two types of information systems offer significant tools: GIS (Geographic Information System and AIS (Architectural Information System. The first one manages urban and territorial scale data, the second one administers architectural scale data. For a complete management and analysis of heritage both scales (territorial-urban and architectural are essential. But despite numerous attempts made in recent years, currently no system is really able to manage them simultaneously. This study aims to create a hybrid system, which is a new interface that allows to simultaneously view an AIS, a GIS and a window for management of spatial queries. Considering the profound differences between the two systems, the ultimate goal is to integrate them by proposing a new Hybrid System (HS to solve the problem of scale change (from analysis to synthesis using a new data structure and a new interface. To achieve the ultimate goal it has been studied mainly: a the possibilities of implementation of the two systems; b spatial analysis and 3D topology.

  9. Privacy in recommender systems

    NARCIS (Netherlands)

    Jeckmans, Arjan; Beye, Michael; Erkin, Zekeriya; Hartel, Pieter; Lagendijk, Reginald; Tang, Qiang; Ramzan, Naeem; Zwol, van Roelof; Lee, Jong-Seok; Clüver, Kai; Hua, Xian-Sheng

    2013-01-01

    In many online applications, the range of content that is offered to users is so wide that a need for automated recommender systems arises. Such systems can provide a personalized selection of relevant items to users. In practice, this can help people find entertaining movies, boost sales through ta

  10. The Systems Revolution

    Science.gov (United States)

    Ackoff, Russell L.

    1974-01-01

    The major organizational and social problems of our time do not lend themselves to the reductionism of traditional analytical and disciplinary approaches. They must be attacked holistically, with a comprehensive systems approach. The effective study of large-scale social systems requires the synthesis of science with the professions that use it.…

  11. Organizing Systemic Innovation

    NARCIS (Netherlands)

    F.P.H. Jaspers (Ferdinand)

    2009-01-01

    textabstractSystemic innovation refers to product development activities that involve the change of multiple interdependent components. Unlike autonomous innovation, which refers to components that change independently, systemic innovation is for many firms the norm rather than the exception. This i

  12. Distributed Treatment Systems.

    Science.gov (United States)

    Zgonc, David; Baideme, Matthew

    2015-10-01

    This section presents a review of the literature published in 2014 on topics relating to distributed treatment systems. This review is divided into the following sections with multiple subsections under each: constituent removal; treatment technologies; and planning and treatment system management.

  13. Equivalence of Differential System

    Institute of Scientific and Technical Information of China (English)

    Zheng-xin Zhou

    2004-01-01

    Using refiecting function of Mironenko we construct some differential systems which are equivalent to the given differential system.This gives us an opportunity to find out the monodromic matrix of these periodi csystems which are not integrable in finite terms.

  14. Abstractions for Mechanical Systems

    DEFF Research Database (Denmark)

    Sloth, Christoffer; Wisniewski, Rafael

    2012-01-01

    mechanical system. The tangential manifolds are generated using constants of motion, which can be derived from Noether's theorem. The transversal manifolds are subsequently generated on a reduced space, given by the Routhian, via action-angle coordinates. The method fully applies for integrable systems. We...

  15. Neighbourhood System of Innovation

    DEFF Research Database (Denmark)

    Muchie, Mammo; Kraemer-Mbula, Erika

    2010-01-01

    The innovation systems literature has provided a useful framework to analyse the linkages of firms and other organisations with both domestic and foreign actors. Although the concept of innovation systems was originally developed at the national level (Freeman, 1982; Nelson & Winter, 1982; Lundvall...

  16. Environmental geographic information system.

    Energy Technology Data Exchange (ETDEWEB)

    Peek, Dennis W; Helfrich, Donald Alan; Gorman, Susan

    2010-08-01

    This document describes how the Environmental Geographic Information System (EGIS) was used, along with externally received data, to create maps for the Site-Wide Environmental Impact Statement (SWEIS) Source Document project. Data quality among the various classes of geographic information system (GIS) data is addressed. A complete listing of map layers used is provided.

  17. Dynamic Systems Modeling

    Directory of Open Access Journals (Sweden)

    Sorin Dan ŞANDOR

    2003-01-01

    Full Text Available System Dynamics was introduced by Jay W. Forrester in the 1960s. Since then the methodology was adopted in many areas of natural or social sciences. This article tries to present briefly how this methodology works, both as Systems Thinking and as Modelling with Vensim computer software.

  18. Appropriering, system, bogobjekt

    DEFF Research Database (Denmark)

    Kromann, Thomas Hvid

    anvendelsen af systemer og spilleregler inden for kunsten i 1960erne. Den afgrænsede litterære anvendelse af systemer, der har været normen i dansk litteraturhistorieskrivning, kritiseres, og der plæderes i stedet for at disse eksperimenter bliver placeret i dén tværæstetiske og transnationale kontekst, der...

  19. UM21 Backpack System

    Science.gov (United States)

    2007-11-02

    UM21 BACKPACK SYSTEM BIANCHI INTERNATIONAL & GREGORY MOUNTAIN PRODUCTS Report Documentation Page Report Date 13Aug2001...Command. z A modified commercial backpack system y Back Pack y Patrol Pack y Butt Pack Introduction Cont’d z Advanced design and superior technology y

  20. Decoding the International System

    CERN Document Server

    Piepers, Ingo

    2015-01-01

    The International System develops according to a clear logic: By means of systemic wars organisational innovations are periodically introduced, contributing to a process of social expansion and integration, and to wealth creation. A finite-time singularity accompanied by four accelerating log-periodic cycles can be identified during the time frame 1495-1945.

  1. Tax Law System

    Science.gov (United States)

    Tsindeliani, Imeda A.

    2016-01-01

    The article deals with consideration of the actual theoretic problems of the subject and system of tax law in Russia. The theoretical approaches to determination of the nature of separate institutes of tax law are represented. The existence of pandect system intax law building as financial law sub-branch of Russia is substantiated. The goal of the…

  2. Technology reviews: Glazing systems

    Energy Technology Data Exchange (ETDEWEB)

    Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

    1992-09-01

    We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology; determine the performance range of available technologies; identify the most promising technologies and promising trends in technology advances; examine market forces and market trends; and develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fag into that class.

  3. Labelled Execution Systems

    Science.gov (United States)

    2012-05-07

    This is most starkly evident in the classical example used to demonstrate that, in the case of infinitely branching systems, a transfinite number of... transfinite number of iterations to converge, what can be shown to fail by appropriately embedding the labelled transition systems of [46, prop. 10.5

  4. Vehicle usage verification system

    NARCIS (Netherlands)

    Scanlon, William G.; McQuiston, Jonathan; Cotton, Simon L.

    2012-01-01

    EN)A computer-implemented system for verifying vehicle usage comprising a server capable of communication with a plurality of clients across a communications network. Each client is provided in a respective vehicle and with a respective global positioning system (GPS) by which the client can determi

  5. Levonorgestrel Intrauterine System

    Science.gov (United States)

    ... Your health-care provider will place your intrauterine system into your uterus, but will leave two threads dangling through your cervix. You should check for these threads after each menstrual period so that you will know whether your intrauterine system is still in place. To check for the ...

  6. Hydrogel based occlusion systems

    NARCIS (Netherlands)

    Stam, F.A.; Jackson, N.; Dubruel, P.; Adesanya, K.; Embrechts, A.; Mendes, E.; Neves, H.P.; Herijgers, P.; Verbrugghe, Y.; Shacham, Y.; Engel, L.; Krylov, V.

    2013-01-01

    A hydrogel based occlusion system, a method for occluding vessels, appendages or aneurysms, and a method for hydrogel synthesis are disclosed. The hydrogel based occlusion system includes a hydrogel having a shrunken and a swollen state and a delivery tool configured to deliver the hydrogel to a tar

  7. Redundant Asynchronous Microprocessor System

    Science.gov (United States)

    Meyer, G.; Johnston, J. O.; Dunn, W. R.

    1985-01-01

    Fault-tolerant computer structure called RAMPS (for redundant asynchronous microprocessor system) has simplicity of static redundancy but offers intermittent-fault handling ability of complex, dynamically redundant systems. New structure useful wherever several microprocessors are employed for control - in aircraft, industrial processes, robotics, and automatic machining, for example.

  8. Media Specialists Evaluation System.

    Science.gov (United States)

    Reese, Carol; Marsen, Louise

    Intended to provide a comprehensive system for the evaluation of a media specialist's total job performance, this three-part evaluation form is based on the St. Louis Community College's Faculty Evaluation System: Instructional Resources Faculty, August 1981. Designed for peer evaluation of media specialists, the first form includes a rating scale…

  9. Measurement System & Calibration report

    DEFF Research Database (Denmark)

    Kock, Carsten Weber; Vesth, Allan

    This Measurement System & Calibration report is describing DTU’s measurement system installed at a specific wind turbine. A major part of the sensors has been installed by others (see [1]) the rest of the sensors have been installed by DTU. The results of the measurements, described in this report...

  10. Bewegingsvolgsysteem = Monitor tracking system

    NARCIS (Netherlands)

    Slycke, Per Johan; Veltink, Petrus Hermanus; Roetenberg, Daniel

    2006-01-01

    A motion tracking system for tracking an object composed of object parts in a three-dimensional space. The system comprises a number of magnetic field transmitters; a number of field receivers for receiving the magnetic fields of the field transmitters; a number of inertial measurement units for rec

  11. Bewegingsvolgsysteem = Monitor tracking system

    NARCIS (Netherlands)

    Slycke, Per Johan; Veltink, Petrus Hermanus; Roetenberg, Daniel

    2007-01-01

    A motion tracking system for tracking an object composed of object parts in a three-dimensional space. The system comprises a number of magnetic field transmitters; a number of field receivers for receiving the magnetic fields of the field transmitters; a number of inertial measurement units for rec

  12. Autonomous cascaded PV system

    OpenAIRE

    2011-01-01

    This paper proposes multi-level PV system; three PV generators each coupled to a buck cell. Each PV-generator-buckconverter channel is controlled such that maximum power is captured independently under different irradiation and temperature levels. The system operation under normal/abnormal conditions is investigated by thoroughly mathematical and simulation work. Peer Reviewed

  13. The "Integrated Library System."

    Science.gov (United States)

    Dowlin, Kenneth E.

    1985-01-01

    Reviews internal and external dimensions of library environment that must be taken into account by library managers when choosing an integrated library system. The selection, acquisition, and implementation stages of Maggie III--a computerized library system sensitive to the internal and external organizational environment--are described. (MBR)

  14. Medical Information Management System

    Science.gov (United States)

    Alterescu, S.; Hipkins, K. R.; Friedman, C. A.

    1979-01-01

    On-line interactive information processing system easily and rapidly handles all aspects of data management related to patient care. General purpose system is flexible enough to be applied to other data management situations found in areas such as occupational safety data, judicial information, or personnel records.

  15. Computational systems chemical biology.

    Science.gov (United States)

    Oprea, Tudor I; May, Elebeoba E; Leitão, Andrei; Tropsha, Alexander

    2011-01-01

    There is a critical need for improving the level of chemistry awareness in systems biology. The data and information related to modulation of genes and proteins by small molecules continue to accumulate at the same time as simulation tools in systems biology and whole body physiologically based pharmacokinetics (PBPK) continue to evolve. We called this emerging area at the interface between chemical biology and systems biology systems chemical biology (SCB) (Nat Chem Biol 3: 447-450, 2007).The overarching goal of computational SCB is to develop tools for integrated chemical-biological data acquisition, filtering and processing, by taking into account relevant information related to interactions between proteins and small molecules, possible metabolic transformations of small molecules, as well as associated information related to genes, networks, small molecules, and, where applicable, mutants and variants of those proteins. There is yet an unmet need to develop an integrated in silico pharmacology/systems biology continuum that embeds drug-target-clinical outcome (DTCO) triplets, a capability that is vital to the future of chemical biology, pharmacology, and systems biology. Through the development of the SCB approach, scientists will be able to start addressing, in an integrated simulation environment, questions that make the best use of our ever-growing chemical and biological data repositories at the system-wide level. This chapter reviews some of the major research concepts and describes key components that constitute the emerging area of computational systems chemical biology.

  16. Plant Phenotype Characterization System

    Energy Technology Data Exchange (ETDEWEB)

    Daniel W McDonald; Ronald B Michaels

    2005-09-09

    This report is the final scientific report for the DOE Inventions and Innovations Project: Plant Phenotype Characterization System, DE-FG36-04GO14334. The period of performance was September 30, 2004 through July 15, 2005. The project objective is to demonstrate the viability of a new scientific instrument concept for the study of plant root systems. The root systems of plants are thought to be important in plant yield and thus important to DOE goals in renewable energy sources. The scientific study and understanding of plant root systems is hampered by the difficulty in observing root activity and the inadequacy of existing root study instrumentation options. We have demonstrated a high throughput, non-invasive, high resolution technique for visualizing plant root systems in-situ. Our approach is based upon low-energy x-ray radiography and the use of containers and substrates (artificial soil) which are virtually transparent to x-rays. The system allows us to germinate and grow plant specimens in our containers and substrates and to generate x-ray images of the developing root system over time. The same plant can be imaged at different times in its development. The system can be used for root studies in plant physiology, plant morphology, plant breeding, plant functional genomics and plant genotype screening.

  17. Controllability of Discontinuous Systems

    OpenAIRE

    Veliov, V. M.; Krastanov, M.

    1988-01-01

    This report presents an approach to the local controllability problem for a discontinuous system. The approach is based on a concept of tangent vector field to a generalized dynamic system, which makes possible the differential geometry tools to be applied in the discontinuous case. Sufficient controllability conditions are derived.

  18. Heating Systems Specialist.

    Science.gov (United States)

    Air Force Training Command, Sheppard AFB, TX.

    This instructional package is intended for use in training Air Force personnel enrolled in a program for apprentice heating systems specialists. Training includes instruction in fundamentals and pipefitting; basic electricity; controls, troubleshooting, and oil burners; solid and gas fuel burners and warm air distribution systems; hot water…

  19. Solar-heating system

    Science.gov (United States)

    1979-01-01

    Report describes solar modular domestic-hot-water and space-heating system intended for use in small single family dwelling where roof-mounted collectors are not feasible. Contents include design, performance, and hardware specifications for assembly, installation, operation, and maintenance of system.

  20. Motivation and reward systems

    NARCIS (Netherlands)

    van Eerde, W.; Vodosek, M.; den Hartog, D.N.; McNett, J.M.

    2014-01-01

    Reward systems are identified as one of the human resource management (HRM) practices that may impact motivation. Reward systems may consist of several components, including financial and nonfinancial rewards, in fixed and variable amounts. Reinforcement, expectancy, and equity principles are discus