WorldWideScience

Sample records for canal neural prosthesis

  1. Online adaptive neural control of a robotic lower limb prosthesis

    Science.gov (United States)

    Spanias, J. A.; Simon, A. M.; Finucane, S. B.; Perreault, E. J.; Hargrove, L. J.

    2018-02-01

    Objective. The purpose of this study was to develop and evaluate an adaptive intent recognition algorithm that continuously learns to incorporate a lower limb amputee’s neural information (acquired via electromyography (EMG)) as they ambulate with a robotic leg prosthesis. Approach. We present a powered lower limb prosthesis that was configured to acquire the user’s neural information and kinetic/kinematic information from embedded mechanical sensors, and identify and respond to the user’s intent. We conducted an experiment with eight transfemoral amputees over multiple days. EMG and mechanical sensor data were collected while subjects using a powered knee/ankle prosthesis completed various ambulation activities such as walking on level ground, stairs, and ramps. Our adaptive intent recognition algorithm automatically transitioned the prosthesis into the different locomotion modes and continuously updated the user’s model of neural data during ambulation. Main results. Our proposed algorithm accurately and consistently identified the user’s intent over multiple days, despite changing neural signals. The algorithm incorporated 96.31% [0.91%] (mean, [standard error]) of neural information across multiple experimental sessions, and outperformed non-adaptive versions of our algorithm—with a 6.66% [3.16%] relative decrease in error rate. Significance. This study demonstrates that our adaptive intent recognition algorithm enables incorporation of neural information over long periods of use, allowing assistive robotic devices to accurately respond to the user’s intent with low error rates.

  2. A cortical neural prosthesis for restoring and enhancing memory

    Science.gov (United States)

    Berger, Theodore W.; Hampson, Robert E.; Song, Dong; Goonawardena, Anushka; Marmarelis, Vasilis Z.; Deadwyler, Sam A.

    2011-08-01

    A primary objective in developing a neural prosthesis is to replace neural circuitry in the brain that no longer functions appropriately. Such a goal requires artificial reconstruction of neuron-to-neuron connections in a way that can be recognized by the remaining normal circuitry, and that promotes appropriate interaction. In this study, the application of a specially designed neural prosthesis using a multi-input/multi-output (MIMO) nonlinear model is demonstrated by using trains of electrical stimulation pulses to substitute for MIMO model derived ensemble firing patterns. Ensembles of CA3 and CA1 hippocampal neurons, recorded from rats performing a delayed-nonmatch-to-sample (DNMS) memory task, exhibited successful encoding of trial-specific sample lever information in the form of different spatiotemporal firing patterns. MIMO patterns, identified online and in real-time, were employed within a closed-loop behavioral paradigm. Results showed that the model was able to predict successful performance on the same trial. Also, MIMO model-derived patterns, delivered as electrical stimulation to the same electrodes, improved performance under normal testing conditions and, more importantly, were capable of recovering performance when delivered to animals with ensemble hippocampal activity compromised by pharmacologic blockade of synaptic transmission. These integrated experimental-modeling studies show for the first time that, with sufficient information about the neural coding of memories, a neural prosthesis capable of real-time diagnosis and manipulation of the encoding process can restore and even enhance cognitive, mnemonic processes.

  3. A cortical neural prosthesis for restoring and enhancing memory.

    Science.gov (United States)

    Berger, Theodore W; Hampson, Robert E; Song, Dong; Goonawardena, Anushka; Marmarelis, Vasilis Z; Deadwyler, Sam A

    2011-08-01

    A primary objective in developing a neural prosthesis is to replace neural circuitry in the brain that no longer functions appropriately. Such a goal requires artificial reconstruction of neuron-to-neuron connections in a way that can be recognized by the remaining normal circuitry, and that promotes appropriate interaction. In this study, the application of a specially designed neural prosthesis using a multi-input/multi-output (MIMO) nonlinear model is demonstrated by using trains of electrical stimulation pulses to substitute for MIMO model derived ensemble firing patterns. Ensembles of CA3 and CA1 hippocampal neurons, recorded from rats performing a delayed-nonmatch-to-sample (DNMS) memory task, exhibited successful encoding of trial-specific sample lever information in the form of different spatiotemporal firing patterns. MIMO patterns, identified online and in real-time, were employed within a closed-loop behavioral paradigm. Results showed that the model was able to predict successful performance on the same trial. Also, MIMO model-derived patterns, delivered as electrical stimulation to the same electrodes, improved performance under normal testing conditions and, more importantly, were capable of recovering performance when delivered to animals with ensemble hippocampal activity compromised by pharmacologic blockade of synaptic transmission. These integrated experimental-modeling studies show for the first time that, with sufficient information about the neural coding of memories, a neural prosthesis capable of real-time diagnosis and manipulation of the encoding process can restore and even enhance cognitive, mnemonic processes.

  4. Vestibular ablation and a semicircular canal prosthesis affect postural stability during head turns

    Science.gov (United States)

    Thompson, Lara A.; Haburcakova, Csilla; Lewis, Richard F.

    2016-01-01

    In our study, we examined postural stability during head turns for two rhesus monkeys: one, single animal study contrasted normal and mild bilateral vestibular ablation and a second animal study contrasted severe bilateral vestibular ablation with and without prosthetic stimulation. The monkeys freely stood, unrestrained on a balance platform and made voluntary head turns between visual targets. To quantify each animals’ posture, motions of the head and trunk, as well as torque about the body’s center-of-mass, were measured. In the mildly ablated animal, we observed less foretrunk sway in comparison to the normal state. When the canal prosthesis provided electric stimulation to the severely ablated animal, it showed a decrease in trunk sway during head turns. Because the rhesus monkey with severe bilateral vestibular loss exhibited a decrease in trunk sway when receiving vestibular prosthetic stimulation, we propose that the prosthetic electrical stimulation partially restored head velocity information. Our results provide an indication that a semicircular canal prosthesis may be an effective way to improve postural stability in patients with severe peripheral vestibular dysfunction. PMID:27405997

  5. Prototype to product—developing a commercially viable neural prosthesis

    Science.gov (United States)

    Seligman, Peter

    2009-12-01

    The Cochlear implant or 'Bionic ear' is a device that enables people who do not get sufficient benefit from a hearing aid to communicate with the hearing world. The Cochlear implant is not an amplifier, but a device that electrically stimulates the auditory nerve in a way that crudely mimics normal hearing, thus providing a hearing percept. Many recipients are able to understand running speech without the help of lipreading. Cochlear implants have reached a stage of maturity where there are now 170 000 recipients implanted worldwide. The commercial development of these devices has occurred over the last 30 years. This development has been multidisciplinary, including audiologists, engineers, both mechanical and electrical, histologists, materials scientists, physiologists, surgeons and speech pathologists. This paper will trace the development of the device we have today, from the engineering perspective. The special challenges of designing an active device that will work in the human body for a lifetime will be outlined. These challenges include biocompatibility, extreme reliability, safety, patient fitting and surgical issues. It is emphasized that the successful development of a neural prosthesis requires the partnership of academia and industry.

  6. Prototype to product-developing a commercially viable neural prosthesis.

    Science.gov (United States)

    Seligman, Peter

    2009-12-01

    The Cochlear implant or 'Bionic ear' is a device that enables people who do not get sufficient benefit from a hearing aid to communicate with the hearing world. The Cochlear implant is not an amplifier, but a device that electrically stimulates the auditory nerve in a way that crudely mimics normal hearing, thus providing a hearing percept. Many recipients are able to understand running speech without the help of lipreading. Cochlear implants have reached a stage of maturity where there are now 170 000 recipients implanted worldwide. The commercial development of these devices has occurred over the last 30 years. This development has been multidisciplinary, including audiologists, engineers, both mechanical and electrical, histologists, materials scientists, physiologists, surgeons and speech pathologists. This paper will trace the development of the device we have today, from the engineering perspective. The special challenges of designing an active device that will work in the human body for a lifetime will be outlined. These challenges include biocompatibility, extreme reliability, safety, patient fitting and surgical issues. It is emphasized that the successful development of a neural prosthesis requires the partnership of academia and industry.

  7. Prosthesis

    Science.gov (United States)

    A prosthesis is a device designed to replace a missing part of the body or to make a part of the body work better. Diseased or missing eyes, arms, hands, legs, or joints are commonly replaced by prosthetic devices. False teeth are known as dental prostheses. ...

  8. Artificial neural networks for automatic modelling of the pectus excavatum corrective prosthesis

    Science.gov (United States)

    Rodrigues, Pedro L.; Moreira, António H. J.; Rodrigues, Nuno F.; Pinho, ACM; Fonseca, Jaime C.; Correia-Pinto, Jorge; Vilaça, João. L.

    2014-03-01

    Pectus excavatum is the most common deformity of the thorax and usually comprises Computed Tomography (CT) examination for pre-operative diagnosis. Aiming at the elimination of the high amounts of CT radiation exposure, this work presents a new methodology for the replacement of CT by a laser scanner (radiation-free) in the treatment of pectus excavatum using personally modeled prosthesis. The complete elimination of CT involves the determination of ribs external outline, at the maximum sternum depression point for prosthesis placement, based on chest wall skin surface information, acquired by a laser scanner. The developed solution resorts to artificial neural networks trained with data vectors from 165 patients. Scaled Conjugate Gradient, Levenberg-Marquardt, Resilient Back propagation and One Step Secant gradient learning algorithms were used. The training procedure was performed using the soft tissue thicknesses, determined using image processing techniques that automatically segment the skin and rib cage. The developed solution was then used to determine the ribs outline in data from 20 patient scanners. Tests revealed that ribs position can be estimated with an average error of about 6.82+/-5.7 mm for the left and right side of the patient. Such an error range is well below current prosthesis manual modeling (11.7+/-4.01 mm) even without CT imagiology, indicating a considerable step forward towards CT replacement by a 3D scanner for prosthesis personalization.

  9. Prediction of facial deformation after complete denture prosthesis using BP neural network.

    Science.gov (United States)

    Cheng, Cheng; Cheng, Xiaosheng; Dai, Ning; Jiang, Xiaotong; Sun, Yuchun; Li, Weiwei

    2015-11-01

    With the accelerated aging of world population, complete denture prosthesis plays an increasingly important role in mouth rehabilitation. In addition to recovering stomatognathic system function, restoring the appearance of a third of the area under the face has become a great challenge in complete denture prosthesis. This study analyzes the interactive relationship between the appearance of a third of the area under the face and complete denture, and proposes a new method to predict facial deformation after complete denture prosthesis. Firstly, to improve computational efficiency, the feature template is constructed to replace the deformed facial region. Secondly, a forecast model of elastic deformation is constructed using BP neural network and predicts elastic deformation amount because of the inhomogeneous, anisotropic and nonlinear material properties of soft tissue. Finally, a new feature template is calculated using deformation amount, and the deformation of preoperative model is simulated using Laplacian deformation technique. The average error rates of different hidden layer nodes in the neural network are analysed. Deformation and postoperative models are superimposed for match analysis. Experimental results show that this method can predict facial soft tissue deformation quickly and accurately. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Classification of EMG signals using artificial neural networks for virtual hand prosthesis control.

    Science.gov (United States)

    Mattioli, Fernando E R; Lamounier, Edgard A; Cardoso, Alexandre; Soares, Alcimar B; Andrade, Adriano O

    2011-01-01

    Computer-based training systems have been widely studied in the field of human rehabilitation. In health applications, Virtual Reality presents itself as an appropriate tool to simulate training environments without exposing the patients to risks. In particular, virtual prosthetic devices have been used to reduce the great mental effort needed by patients fitted with myoelectric prosthesis, during the training stage. In this paper, the application of Virtual Reality in a hand prosthesis training system is presented. To achieve this, the possibility of exploring Neural Networks in a real-time classification system is discussed. The classification technique used in this work resulted in a 95% success rate when discriminating 4 different hand movements.

  11. Hearing results using titanium ossicular replacement prosthesis in intact canal wall tympanoplasty for cholesteatoma.

    Science.gov (United States)

    Quaranta, Nicola; Zizzi, Stefania; Quaranta, Antonio

    2011-01-01

    Titanium proved to be a valuable alternative to ossicles in ossiculoplasty procedures. Complication rates are comparable to those obtained by other authors with titanium and nontitanium prostheses. Hearing results were worse compared with other reports; however, no conclusion can be drawn on the basis of the literature because of the heterogeneity of the populations studied. To evaluate the results and complications of total (TORP) and partial (PORP) titanium ossicular replacement prostheses in middle ear cholesteatoma. Fifty-seven patients affected by acquired cholesteatoma of the middle ear undergoing titanium ossiculoplasty during second stage intact canal wall tympanoplasty were evaluated. Postoperative hearing gain, complication rate, and revision rate were analyzed. Average postoperative gain was 13.6 dB HL for PORP and 17.9 dB HL for TORP. After ossicular reconstruction the mean postoperative ABG was 24.1 dB HL in PORPs and 27.2 dB HL in TORPs. The difference in air-bone gap (ABG) between the two groups after ossiculoplasty was not significant. The number of patients with an ABG > 30 dB was higher in the TORP group compared with the PORP group (p = 0.024) after ossicular reconstruction. The total extrusion rate was 5.2% and the total revision rate was 10.5%.

  12. In vivo evaluation of a neural stem cell-seeded prosthesis

    Science.gov (United States)

    Purcell, E. K.; Seymour, J. P.; Yandamuri, S.; Kipke, D. R.

    2009-04-01

    Neural prosthetics capable of recording or stimulating neuronal activity may restore function for patients with motor and sensory deficits resulting from injury or degenerative disease. However, overcoming inconsistent recording quality and stability in chronic applications remains a significant challenge. A likely reason for this is the reactive tissue response to the devices following implantation into the brain, which is characterized by neuronal loss and glial encapsulation. We have developed a neural stem cell-seeded probe to facilitate integration of a synthetic prosthesis with the surrounding brain tissue. We fabricated parylene devices that include an open well seeded with neural stem cells encapsulated in an alginate hydrogel scaffold. Quantitative and qualitative data describing the distribution of neuronal, glial, and progenitor cells surrounding seeded and control devices are reported over four time points spanning 3 months. Neuronal loss and glial encapsulation associated with cell-seeded probes were mitigated during the initial week of implantation and exacerbated by 6 weeks post-insertion compared to control conditions. We hypothesize that graft cells secrete neuroprotective and neurotrophic factors that effect the desired healing response early in the study, with subsequent cell death and scaffold degradation accounting for a reversal of these results later. Applications of this biohybrid technology include future long-term neural recording and sensing studies.

  13. Design of alluvial Egyptian irrigation canals using artificial neural networks method

    Directory of Open Access Journals (Sweden)

    Hassan Ibrahim Mohamed

    2013-06-01

    Full Text Available In the present study, artificial neural networks method (ANNs is used to estimate the main parameters which used in design of stable alluvial channels. The capability of ANN models to predict the stable alluvial channels dimensions is investigated, where the flow rate and sediment mean grain size were considered as input variables and wetted perimeter, hydraulic radius, and water surface slope were considered as output variables. The used ANN models are based on a back propagation algorithm to train a multi-layer feed-forward network (Levenberg Marquardt algorithm. The proposed models were verified using 311 data sets of field data collected from 61 manmade canals and drains. Several statistical measures and graphical representation are used to check the accuracy of the models in comparison with previous empirical equations. The results of the developed ANN model proved that this technique is reliable in such field compared with previously developed methods.

  14. Non-weight-bearing neural control of a powered transfemoral prosthesis

    OpenAIRE

    Hargrove, Levi J; Simon, Ann M; Lipschutz, Robert; Finucane, Suzanne B; Kuiken, Todd A

    2013-01-01

    Lower limb prostheses have traditionally been mechanically passive devices without electronic control systems. Microprocessor-controlled passive and powered devices have recently received much interest from the clinical and research communities. The control systems for these devices typically use finite-state controllers to interpret data measured from mechanical sensors embedded within the prosthesis. In this paper we investigated a control system that relied on information extracted from my...

  15. Non-weight-bearing neural control of a powered transfemoral prosthesis.

    Science.gov (United States)

    Hargrove, Levi J; Simon, Ann M; Lipschutz, Robert; Finucane, Suzanne B; Kuiken, Todd A

    2013-06-19

    Lower limb prostheses have traditionally been mechanically passive devices without electronic control systems. Microprocessor-controlled passive and powered devices have recently received much interest from the clinical and research communities. The control systems for these devices typically use finite-state controllers to interpret data measured from mechanical sensors embedded within the prosthesis. In this paper we investigated a control system that relied on information extracted from myoelectric signals to control a lower limb prosthesis while amputee patients were seated. Sagittal plane motions of the knee and ankle can be accurately (>90%) recognized and controlled in both a virtual environment and on an actuated transfemoral prosthesis using only myoelectric signals measured from nine residual thigh muscles. Patients also demonstrated accurate (~90%) control of both the femoral and tibial rotation degrees of freedom within the virtual environment. A channel subset investigation was completed and the results showed that only five residual thigh muscles are required to achieve accurate control. This research is the first step in our long-term goal of implementing myoelectric control of lower limb prostheses during both weight-bearing and non-weight-bearing activities for individuals with transfemoral amputation.

  16. A High-Performance Neural Prosthesis Enabled by Control Algorithm Design

    Science.gov (United States)

    Gilja, Vikash; Nuyujukian, Paul; Chestek, Cindy A.; Cunningham, John P.; Yu, Byron M.; Fan, Joline M.; Churchland, Mark M.; Kaufman, Matthew T.; Kao, Jonathan C.; Ryu, Stephen I.; Shenoy, Krishna V.

    2012-01-01

    Neural prostheses translate neural activity from the brain into control signals for guiding prosthetic devices, such as computer cursors and robotic limbs, and thus offer disabled patients greater interaction with the world. However, relatively low performance remains a critical barrier to successful clinical translation; current neural prostheses are considerably slower with less accurate control than the native arm. Here we present a new control algorithm, the recalibrated feedback intention-trained Kalman filter (ReFIT-KF), that incorporates assumptions about the nature of closed loop neural prosthetic control. When tested with rhesus monkeys implanted with motor cortical electrode arrays, the ReFIT-KF algorithm outperforms existing neural prostheses in all measured domains and halves acquisition time. This control algorithm permits sustained uninterrupted use for hours and generalizes to more challenging tasks without retraining. Using this algorithm, we demonstrate repeatable high performance for years after implantation across two monkeys, thereby increasing the clinical viability of neural prostheses. PMID:23160043

  17. Towards multifocal ultrasonic neural stimulation II: design considerations for an acoustic retinal prosthesis

    Science.gov (United States)

    Naor, Omer; Hertzberg, Yoni; Zemel, Esther; Kimmel, Eitan; Shoham, Shy

    2012-04-01

    Ultrasound waves, widely used as a non-invasive diagnostic modality, were recently shown to stimulate neuronal activity. Functionally meaningful stimulation, as is required in order to form a unified percept, requires the dynamic generation of simultaneous stimulation patterns. In this paper, we examine the general feasibility and properties of an acoustic retinal prosthesis, a new vision restoration strategy that will combine ultrasonic neuro-stimulation and ultrasonic field sculpting technology towards non-invasive artificial stimulation of surviving neurons in a degenerating retina. We explain the conceptual framework for such a device, study its feasibility in an in vivo ultrasonic retinal stimulation study and discuss the associated design considerations and tradeoffs. Finally, we simulate and experimentally validate a new holographic method—the angular spectrum-GSW—for efficient generation of uniform and accurate continuous ultrasound patterns. This method provides a powerful, flexible solution to the problem of projecting complex acoustic images onto structures like the retina.

  18. User intent prediction with a scaled conjugate gradient trained artificial neural network for lower limb amputees using a powered prosthesis.

    Science.gov (United States)

    Woodward, Richard B; Spanias, John A; Hargrove, Levi J

    2016-08-01

    Powered lower limb prostheses have the ability to provide greater mobility for amputee patients. Such prostheses often have pre-programmed modes which can allow activities such as climbing stairs and descending ramps, something which many amputees struggle with when using non-powered limbs. Previous literature has shown how pattern classification can allow seamless transitions between modes with a high accuracy and without any user interaction. Although accurate, training and testing each subject with their own dependent data is time consuming. By using subject independent datasets, whereby a unique subject is tested against a pooled dataset of other subjects, we believe subject training time can be reduced while still achieving an accurate classification. We present here an intent recognition system using an artificial neural network (ANN) with a scaled conjugate gradient learning algorithm to classify gait intention with user-dependent and independent datasets for six unilateral lower limb amputees. We compare these results against a linear discriminant analysis (LDA) classifier. The ANN was found to have significantly lower classification error (P<;0.05) than LDA with all user-dependent step-types, as well as transitional steps for user-independent datasets. Both types of classifiers are capable of making fast decisions; 1.29 and 2.83 ms for the LDA and ANN respectively. These results suggest that ANNs can provide suitable and accurate offline classification in prosthesis gait prediction.

  19. In Vitro Restoration of an Amyloid-Beta Altered Network Circuitry in a 'Mutated Biomimetic Acetylcholinesterase' Memristor/Memcapacitor Neural Prosthesis

    Directory of Open Access Journals (Sweden)

    John THORNTON

    2015-08-01

    Full Text Available Many diseases involve the ysregulation of acetylcholinesterase (ACHE causing inappropriate production of the neurotransmitter acetylcholine (ACH. Study of how the ACH actually restores a life threatening neural circuitry damage will provide valuable information for study Alzhermer’s disease. An artificial neuronal device was developed with nanostructured biomimetic mutated ACHE gorge membrane on gold chips having memristor/memcapacitor’s characteristics, served as a model for damaged brain circuitry prosthesis, compared before and after ACH treatments, for in vitro evaluation of the memory restoration in the presence of Amyloid-beta (Ab under the conditions of free from tracers and antibodies in NIST human serum. The results are presented in three categories in “Energy-Sensory” images. Before ACH treatments, images showed four stages of circuitry damages from non symptomatic to life threatening. After a 15 nM ACH treatment, the circuitry was restored due to the ACH removed Pathological High Frequency Oscillation (pHFO center during Slow- Waving Sleeping (SWS. After the prosthesis increased hydrophobicity, the High Frequency Oscillation (HFO was created. Results were compared between the recovered and the “normal brain”: 0.14 vs. 0.47 pJ/bit/µm3 for long-term and 14.0 vs.7.0 aJ/bit/µm3 for short-term memory restoration, respectively. The ratio of Rmax/Rmin value is 6.3-fold higher after the treatment of ACH compared without the treatment in the presence of Ab and the reentry sensitivity increased by 613.8- fold.

  20. Bionic prosthesis

    OpenAIRE

    МЫЛЬНИКОВ А.М.

    2015-01-01

    The real achievement in the prosthetics has become artificial joints that function as well as natural joints. Bionic limbs are the most advanced type of prosthesis at the moment. These electronic devices are made from synthetic materials, but the person can manage them using his/her own nervous system through the targeted muscle reinnervation (recovery disturbed innervation of organs and tissues surgically).Principle of operation of bionic prosthesis. After the amputation because of a serious...

  1. Longitudinal performance of an implantable vestibular prosthesis.

    Science.gov (United States)

    Phillips, Christopher; Ling, Leo; Oxford, Trey; Nowack, Amy; Nie, Kaibao; Rubinstein, Jay T; Phillips, James O

    2015-04-01

    Loss of vestibular function may be treatable with an implantable vestibular prosthesis that stimulates semicircular canal afferents with biphasic pulse trains. Several studies have demonstrated short-term activation of the vestibulo-ocular reflex (VOR) with electrical stimulation. Fewer long-term studies have been restricted to small numbers of animals and stimulation designed to produce adaptive changes in the electrically elicited response. This study is the first large consecutive series of implanted rhesus macaque to be studied longitudinally using brief stimuli designed to limit adaptive changes in response, so that the efficacy of electrical activation can be studied over time, across surgeries, canals and animals. The implantation of a vestibular prosthesis in animals with intact vestibular end organs produces variable responses to electrical stimulation across canals and animals, which change in threshold for electrical activation of eye movements and in elicited slow phase velocities over time. These thresholds are consistently lower, and the slow phase velocities higher, than those obtained in human subjects. The changes do not appear to be correlated with changes in electrode impedance. The variability in response suggests that empirically derived transfer functions may be required to optimize the response of individual canals to a vestibular prosthesis, and that this function may need to be remapped over time. This article is part of a Special Issue entitled . Copyright © 2014 Elsevier B.V. All rights reserved.

  2. Ethical issues in the development of a vestibular prosthesis

    OpenAIRE

    Poppendieck, Wigand; Hoffmann, Klaus-Peter; Merfeld, Daniel; Guyot, Jean-Philippe; Micera, Silvestro

    2011-01-01

    During the development of a neural prosthesis, various ethical aspects have to be considered. These range from the basic design of the prosthesis and manufacturing of the various components and the system using biocompatible materials to extensive in vitro and in vivo testing and investigations in the animal model, before taking the final step and going to human trials. As medical systems, neural prostheses have to be proven absolutely safe before considering any clinical study. In this work,...

  3. Challenges in prosthesis classification.

    Science.gov (United States)

    Robertsson, Otto; Mendenhall, Stan; Paxton, Elizabeth W; Inacio, Maria C S; Graves, Stephen

    2011-12-21

    Accurate prosthesis classification is critical for total joint arthroplasty surveillance and assessment of comparative effectiveness. Historically, prosthesis classification was based solely on the names of the prosthesis manufacturers. As a result, prosthesis designs changed without corresponding name changes, and other prostheses' names changed over time without substantial design modifications. As the number of prostheses used in total joint arthroplasty on the market increased, catalog and lot numbers associated with prosthesis descriptions were introduced by manufacturers. Currently, these catalog and lot numbers are not standardized, and there is no consensus on categorization of these numbers into brands or subbrands. Classification of the attributes of a prosthesis also varies, limiting comparisons of prostheses across studies and reports. The development of a universal prosthesis classification system would standardize prosthesis classification and enhance total joint arthroplasty research collaboration worldwide. This is a current area of focus for the International Consortium of Orthopaedic Registries (ICOR).

  4. The Advantages of Human Milk Recognize the Spatiotemporal Locations of Toxins and Intelligently Bypass Them by Forming a Hummingbird-Like Hovering Neural Network Circuitry Based on an Organic Biomimetic Choline Acetyltransferase Memristor/Memcapacitor Prosthesis

    Directory of Open Access Journals (Sweden)

    E. T. CHEN

    2016-08-01

    Full Text Available We have demonstrated a unique approach to study human milk’s advantage in promoting and protecting infant early brain cognitive development by recognizing toxins and intelligently bypassing the toxin by forming high frequency oscillation (HFO in the brain circuitry when compared with organic cow milk samples based on an organic memristor/memcapacitor biomimetic Choline Acetyltransferase (CHAT neural network circuitry prosthesis along with a 3D Energy-sensory dynamic mapping method under antibody- free, radiolabeling-free, and reagent-less conditions. We also demonstrated cow milk is unfit for infant cognitive development, and it is actually harmful in terms of mutating infant brain synapse circuitry conformation, current flow direction, and energy output that lead to multiple Pathological High Frequency Oscillation (pHFO formations, and further, it led to sudden infant death syndrome (SIDS based on our prediction.

  5. canal24

    Data.gov (United States)

    California Department of Resources — Canal system center lines in the Central Valley of California and adjacent areas captured from 1:24,000-scale USGS topographic maps. Updates and modifications made...

  6. An electronic prosthesis mimicking the dynamic vestibular function

    Science.gov (United States)

    Shkel, Andrei M.

    2006-03-01

    This paper reports our progress toward development of a unilateral vestibular prosthesis. The sensing element of the prosthesis is a custom designed one-axis MEMS gyroscope. Similarly to the natural semicircular canal, the microscopic gyroscope senses angular motion of the head and generates voltages proportional to the corresponding angular accelerations. Then, voltages are sent to the pulse generating unit where angular motion is translated into voltage pulses. The voltage pulses are converted into current pulses and are delivered through specially designed electrodes, conditioned to stimulate the corresponding vestibular nerve branch. Our preliminary experimental evaluations of the prosthesis on a rate table indicate that the device's output matches the average firing rate of vestibular neurons to those in animal models reported in the literature. The proposed design is scalable; the sensing unit, pulse generator, and the current source can be potentially implemented on a single chip using integrated MEMS technology.

  7. Wave Mechanics of the Vestibular Semicircular Canals.

    Science.gov (United States)

    Iversen, Marta M; Rabbitt, Richard D

    2017-09-05

    The semicircular canals are biomechanical sensors responsible for detecting and encoding angular motion of the head in 3D space. Canal afferent neurons provide essential inputs to neural circuits responsible for representation of self-position/orientation in space, and to compensatory circuits including the vestibulo-ocular and vestibulo-collic reflex arcs. In this work we derive, to our knowledge, a new 1D mathematical model quantifying canal biomechanics based on the morphology, dynamics of the inner ear fluids, and membranous labyrinth deformability. The model takes the form of a dispersive wave equation and predicts canal responses to angular motion, sound, and mechanical stimulation. Numerical simulations were carried out for the morphology of the human lateral canal using known physical properties of the endolymph and perilymph in three diverse conditions: surgical plugging, rotation, and mechanical indentation. The model reproduces frequency-dependent attenuation and phase shift in cases of canal plugging. During rotation, duct deformability extends the frequency bandwidth and enhances the high frequency gain. Mechanical indentation of the membranous duct at high frequencies evokes traveling waves that move away from the location of indentation and at low frequencies compels endolymph displacement along the canal. These results demonstrate the importance of the conformal perilymph-filled bony labyrinth to pressure changes and to high frequency sound and vibration. Published by Elsevier Inc.

  8. Atrioventricular Canal Defect

    Science.gov (United States)

    ... tract infections. Atrioventricular canal defect can cause recurrent bouts of lung infections. Heart failure. Untreated, atrioventricular canal ... Leaky heart valves Narrowing of the heart valves Abnormal heart rhythm Breathing difficulties associated with lung damage ...

  9. Cultured neural networks: Optimisation of patterned network adhesiveness and characterisation of their neural activity

    NARCIS (Netherlands)

    Rutten, Wim; Ruardij, T.G.; Marani, Enrico; Roelofsen, B.H.

    2006-01-01

    One type of future, improved neural interface is the "cultured probe"?. It is a hybrid type of neural information transducer or prosthesis, for stimulation and/or recording of neural activity. It would consist of a microelectrode array (MEA) on a planar substrate, each electrode being covered and

  10. Development of a micromachined epiretinal vision prosthesis

    Science.gov (United States)

    Stieglitz, Thomas

    2009-12-01

    Microsystems engineering offers the tools to develop highly sophisticated miniaturized implants to interface with the nervous system. One challenging application field is the development of neural prostheses to restore vision in persons that have become blind by photoreceptor degeneration due to retinitis pigmentosa. The fundamental work that has been done in one approach is presented here. An epiretinal vision prosthesis has been developed that allows hybrid integration of electronics on one part of a thin and flexible substrate. Polyimide as a substrate material is proven to be non-cytotoxic. Non-hermetic encapsulation with parylene C was stable for at least 3 months in vivo. Chronic animal experiments proved spatially selective cortical activation after epiretinal stimulation with a 25-channel implant. Research results have been transferred successfully to companies that currently work on the medical device approval of these retinal vision prostheses in Europe and in the USA.

  11. Early Forming a Hummingbird-like Hovering Neural Network Circuitry Pattern with Reentrant Spatiotemporal Energy-Sensory Orientation Privileged to Avoid “Epilepsy” Based on a Biomimetic Acetylcholinesterase Memcapacitor Prosthesis

    Directory of Open Access Journals (Sweden)

    Ellen T. Chen

    2015-08-01

    Full Text Available The hummingbird’s significant asymmetry hovering flight with energy conservation pattern is remarkable among all vertebrates. However, little is known to human’s neuronal network circuitry current flow pattern for whether or not has this privilege during slow wave sleeping (SWS. What is the advantage in order to avoid diseases if we have this network pattern ? A memory device was developed with nanostructured biomimetic acetylcholinesterase (ACHE gorge membrane on gold chips as memcapacitor 1, served as a normal brain network prosthesis, compared with a mutated ACHE prosthesis as device 2, for evaluation of neuronal network circuitry integrity in the presence of Amyloid- beta (Ab under the conditions of free from tracers and antibodies in spiked NIST SRM 965A human serum. Three categories of Reentrant Energy-Sensory images are presented based on infused brain pulse energies in a matrix of “Sensory Biomarkers” having frequencies over 0.25-333 Hz at free and fixed Ab levels, respectively. Early non-symptomatic epilepsy was indentified and predicted by device 2 due to Pathological High Frequency Oscillation (pHFO and large areas of 38 µM Ab re-depositions. Device 1 sensitively “feels” Ab damage because of its Frequency Oscillation (HFO enhanced the hummingbird- like hovering pattern with higher reentrant energy sensitivity of 0.12 pj/bit/s/µm3 without Ab compared with Ab, 13 aj/bit/s/µm3/nM over 3.8-471 nM range over 0.003-4s. Device 1 reliably detected early CR dysfunction privileged to avoid epilepsy.

  12. P3-7: On Prototyping a Visual Prosthesis System with Artificial Retina and Optic Nerve Based on Arrayed Microfibers

    OpenAIRE

    Jian Hong Chen; Lon Alex Wang

    2012-01-01

    The traditional visual prosthesis system combines both a camera and a microelectrode array implanted on the visual neural network including retina, optic nerve, and visual cortex. Here, we introduce a new visual prosthesis system in which an artificial retina and optic nerve are demonstrated. The prototype of optic nerve for image transmission is comprised of arrayed PMMA microfibers with both ends connected with two planes, one functioned as retina for light reception and another attached to...

  13. Spatiotemporal interactions in retinal prosthesis subjects.

    Science.gov (United States)

    Horsager, Alan; Greenberg, Robert J; Fine, Ione

    2010-02-01

    Vision loss due to retinitis pigmentosa affects an estimated 15 million people worldwide. Through collaboration between Second Sight Medical Products, Inc., and the Doheny Eye Institute, six blind human subjects underwent implantation with epiretinal 4 x 4 electrode arrays designed to directly stimulate the remaining cells of the retina, with the goal of restoring functional vision by applying spatiotemporal patterns of stimulation. To better understand spatiotemporal interactions between electrodes during synchronous and asynchronous stimulation, the authors investigated how percepts changed as a function of pulse timing across the electrodes. Pulse trains (20, 40, 80, and 160 Hz) were presented on groups of electrodes with 800, 1600, or 2400 microm center-to-center separation. Stimulation was either synchronous (pulses were presented simultaneously across electrodes) or asynchronous (pulses were phase shifted). Using a same-different discrimination task, the authors were able to evaluate how the perceptual quality of the stimuli changed as a function of phase shifts across multiple electrodes. Even after controlling for electric field interactions, subjects could discriminate between spatiotemporal pulse train patterns based on differences of phase across electrodes as small as 3 ms. These findings suggest that the quality of the percept is affected not only by electric field interactions but also by spatiotemporal interactions at the neural level. During multielectrode stimulation, interactions between electrodes have a significant influence on the quality of the percept. Understanding how these spatiotemporal interactions at the neural level influence percepts during multielectrode stimulation is fundamental to the successful design of a retinal prosthesis.

  14. Magnetically retained silicone facial prosthesis

    African Journals Online (AJOL)

    straps, spectacle frames, extension from the denture, magnets, adhesives and implants material.[4] In this case report using maxillofacial silicone material and magnets, the prosthesis was constructed to camouflage the facial defect more esthetically. Case Report. A 67‑year‑old male patient was referred to the department.

  15. Magnetically retained silicone facial prosthesis

    African Journals Online (AJOL)

    Key words: Magnet retention, oro cutaneous fistula, silicone maxillofacial prosthesis. Date of Acceptance: 09-Jun-2013. Address for correspondence: Dr. Suresh Venugopalan, Department of Prosthodontics,. Saveetha Dental College, Ponamalle High Road,. Chennai ‑ 600 077, Tamil Nadu, India. E‑mail: ...

  16. Elektra prosthesis for trapeziometacarpal osteoarthritis

    DEFF Research Database (Denmark)

    Klahn, A; Nygaard, Mads; Gvozdenovic, R

    2012-01-01

    We present a prospective follow-up of 39 Elektra prostheses in 37 patients (32 women and five men), with a mean age of 56.5 (range 46-71) years; 34 patients had osteoarthritis and three had rheumatoid arthritis. Patients were followed using clinical examination, including measurement of pain...... be the key problem in treating trapeziometacarpal osteoarthritis using a total prosthesis....

  17. The fixed/detachable implant provisional prosthesis.

    Science.gov (United States)

    Cibirka, R M; Linebaugh, M L

    1997-06-01

    Interim modification and management of a complete denture following surgical uncovering of dental implants can be time-intensive and may fail to provide adequate patient benefit until the definitive prosthesis can be completed. Inadequate interim management can result in functional and tissue difficulties. Modification of the conventional complete denture to a fixed/detachable provisional prosthesis in a one-stage procedure provides the patient an opportunity to experience a fixed prosthesis. The incorporation of fixed, provisional cylinders to the existing denture base using autopolymerizing acrylic resin with a closed-mouth technique is described. The peripheral regions are reduced and the distal extension shortened to resemble a fixed/detachable prosthesis. This conversion technique can provide patient satisfaction and comfort until delivery of the definitive prosthesis. Esthetic concerns, home care problems, or patient difficulties with the provisional prosthesis can be rectified in the final prosthesis.

  18. Design of canals

    CERN Document Server

    Swamee, P K

    2015-01-01

    The book presents firsthand material from the authors on design of hydraulic canals. The book discusses elements of design based on principles of hydraulic flow through canals. It covers optimization of design based on usage requirements and economic constraints. The book includes explicit design equations and design procedures along with design examples for varied cases. With its comprehensive coverage of the principles of hydraulic canal design, this book will prove useful to students, researchers, and practicing engineers. End-of-chapter pedagogical elements make it ideal for use in graduate courses on hydraulic structures offered by most civil engineering departments across the world.

  19. Plasticity in the Visual System is Associated with Prosthesis Use in Phantom Limb Pain.

    Science.gov (United States)

    Preißler, Sandra; Dietrich, Caroline; Blume, Kathrin R; Hofmann, Gunther O; Miltner, Wolfgang H R; Weiss, Thomas

    2013-01-01

    The experience of strong phantom limb pain (PLP) in arm amputees was previously shown to be associated with structural neural plasticity in parts of the cortex that belong to dorsal and ventral visual streams. It has been speculated that this plasticity results from the extensive use of a functional prosthesis which is associated with increased visual feedback to control the artificial hand. To test this hypothesis, we reanalyzed data of cortical volumes of 21 upper limb amputees and tested the association between the amount of use of the hand prosthesis and cortical volume plasticity. On the behavioral level, we found no relation between PLP and the amount of prosthesis use for the whole patient group. However, by subdividing the patient group into patients with strong PLP and those with low to medium PLP, stronger pain was significantly associated with less prosthesis use whereas the group with low PLP did not show such an association. Most plasticity of cortical volume was identified within the dorsal stream. The more the patients that suffered from strong PLP used their prosthesis, the smaller was the volume of their posterior parietal cortex. Our data indicate a relationship between prosthesis use and cortical plasticity of the visual stream. This plasticity might present a brain adaptation process to new movement and coordination patterns needed to guide an artificial hand.

  20. Plasticity in the Visual System is Associated with Prosthesis Use in Phantom Limb Pain

    Science.gov (United States)

    Preißler, Sandra; Dietrich, Caroline; Blume, Kathrin R.; Hofmann, Gunther O.; Miltner, Wolfgang H. R.; Weiss, Thomas

    2013-01-01

    The experience of strong phantom limb pain (PLP) in arm amputees was previously shown to be associated with structural neural plasticity in parts of the cortex that belong to dorsal and ventral visual streams. It has been speculated that this plasticity results from the extensive use of a functional prosthesis which is associated with increased visual feedback to control the artificial hand. To test this hypothesis, we reanalyzed data of cortical volumes of 21 upper limb amputees and tested the association between the amount of use of the hand prosthesis and cortical volume plasticity. On the behavioral level, we found no relation between PLP and the amount of prosthesis use for the whole patient group. However, by subdividing the patient group into patients with strong PLP and those with low to medium PLP, stronger pain was significantly associated with less prosthesis use whereas the group with low PLP did not show such an association. Most plasticity of cortical volume was identified within the dorsal stream. The more the patients that suffered from strong PLP used their prosthesis, the smaller was the volume of their posterior parietal cortex. Our data indicate a relationship between prosthesis use and cortical plasticity of the visual stream. This plasticity might present a brain adaptation process to new movement and coordination patterns needed to guide an artificial hand. PMID:23805096

  1. Plasticity in the visual system is associated with prosthesis use in phantom limb pain

    Directory of Open Access Journals (Sweden)

    Sandra ePreißler

    2013-06-01

    Full Text Available The experience of strong phantom limb pain (PLP in arm amputees was previously shown to be associated with structural neural plasticity in parts of the cortex that belong to dorsal and ventral visual streams. It has been speculated that this plasticity results from the extensive use of a functional prosthesis which is associated with increased visual feedback to control the artificial hand.To test this hypothesis, we reanalyzed data of cortical volumes of 21 upper limb amputees and tested the association between the amount of use of the hand prosthesis and cortical volume plasticity.On the behavioral level, we found no relation between PLP and the amount of prosthesis use for the whole patient group. However, by subdividing the patient group into patients with strong PLP and those with low to medium PLP, stronger pain was significantly associated with less prosthesis use whereas the group with low PLP did not show such an association.Most plasticity of cortical volume was identified within the dorsal stream. The more the patients that suffered from strong PLP used their prosthesis, the smaller was the volume of their posterior parietal cortex.Our data indicate a relationship between prosthesis use and cortical plasticity of the visual stream. This plasticity might present a brain adaption process to new movement and coordination patterns needed to guide an artificial hand.

  2. Management of the Nasopalatine Canal and Foramen Associated With Dental Implant Therapy.

    Science.gov (United States)

    Cavallaro, John; Tsuji, Shota; Chiu, Tzu-Shan; Greenstein, Gary

    2016-06-01

    In some patients, the contents of the nasopalatine canal must be removed to facilitate placement of a dental implant into the canal. Reasons to enucleate the canal in preparation for a bone graft or a dental implant include inadvertent perforation into the canal when creating an osteotomy for an implant, severe atrophy of the maxilla, and a large foramen that precludes placing an implant into the desired location along the bony ridge. The authors searched the dental literature for clinical reports in humans that addressed placement of dental implants into or adjacent to the nasopalatine canal. They found that the nasopalatine canal is usually around 10-mm long and 4-mm wide and slants from the horizontal plane at a 66-degree angle, and there is considerable variation regarding these measurements. Several clinical reports demonstrate that the canal can be enucleated and bone grafted before successful implant placement. It is also possible to place an implant into the canal at the time of surgery and this procedure may or may not be combined with an adjunctive bone graft. Numerous case reports indicate there is usually no permanent loss of sensation of the anterior palate when an implant is placed into the nasopalatine canal. The authors concluded that placing an implant into the nasopalatine canal is a viable procedure as part of a surgical and prosthetic treatment plan when there is a dearth of alternate sites for implant placement. In patients with severe atrophy of the maxilla, combination syndrome, or who have a large or malpositioned nasopalatine canal, the canal can be used as a site to place a dental implant to support a fixed or removable dental prosthesis.

  3. Forced extrusion for removal of impacted third molars close to the mandibular canal Extrusión forzada para extraer los terceros molares impactados cerca del canal mandibular

    Directory of Open Access Journals (Sweden)

    Dennis Flanagan DDS

    2012-03-01

    Full Text Available Impacted mandibular third molars can be located in close proximity to the mandibular canal. This creates a risk for the nerve or artery injury. These are contained in the canal. However, the impacted third molar can be moved coronally by orthodontic means, after removal of overlying bone, and safely extracted. The orthodontic intervention slowly moves the tooth apex away from the mandibular canal and reduces the potential for a neural injury. This method may be useful for older patients with root apices that approximate or are actually located in the mandibular canal. This technique needs further study. There is a theoretical potential for neural or arterial injury from physical contact of the tooth apex as it moves by or through the mandibular canal.Los terceros molares inferiores impactados pueden localizarse muy cerca del canal mandibular. Esto constituye un riesgo de lesión del nervio o la arteria, que se localizan dentro del canal. No obstante, el tercer molar impactado puede desplazarse en dirección coronal con ortodoncia, tras ostectomía del hueso suprayacente, y extraerse sin riesgos. La intervención ortodóncica desplaza lentamente el ápice del diente fuera del canal mandibular y reduce la posibilidad de lesión neural. Este método puede ser útil para pacientes de edad avanzada con ápices dentales que se aproximan o en realidad se localizan en el canal mandibular. La técnica necesita un estudio adicional. Hay la posibilidad teórica de lesión neural o arterial a partir del contacto físico del ápice del diente a medida que se desplaza a través del canal mandibular.

  4. [Ideal total hip prosthesis in 1993].

    Science.gov (United States)

    Delagoutte, J P; Mainard, D

    Although it is a hazardous adventure to define what is an ideal in any field, it would appear that there is a certain consensus about total hip prostheses. The fundamental principle of the total hip replacement was based on the articulation of a spheric segment, a mobile head contained in a hemispheric non-retaining element. To date, the first material is a titanium in a alloy containing 6% aluminum and 4% vanadium. The second material facing the titanium is polyethylene or alumine. Thus the joint couple could be "polyethylene-metal", or "polyethylene-alumine" or even "alumine-alumine". The hemispheric element can be a massive piece of polyethylene or formed by a peripheral metal (an open hemisphere) filled with the joint surface, itself made of polyethylene. This solution offers the possibility of changing the prosthesis in case of wear without interrupting the implant-bone contact. The first type is cemented to the bone with methyl polymethacrylate. With the second, the metallic part need not to be cemented and can be fitted to the bone by simple pressing. Several points are essential in the femoral piece. It should include a removable head so the length of the neck can be adjusted. It must fill the medullary canal as closely as possible and fill the methaphyseal space. It is fixed by a self-fitting system leading to stable secondary long-term fixation-a porous covering, sometimes with hydroxy apatite can also be useful. In certain cases it must be cemented, although the cement must only play the role of adaptation.(ABSTRACT TRUNCATED AT 250 WORDS)

  5. Total Hip Arthroplasty Using the S-ROM-A Prosthesis for Anatomically Difficult Asian Patients.

    Science.gov (United States)

    Hozumi, Akira; Kobayashi, Kyousuke; Tsuru, Nobuhisa; Miyamoto, Chikara; Maeda, Jyunichiro; Chiba, Ko; Goto, Hisataka; Osaki, Makoto

    2015-01-01

    The S-ROM-A prosthesis has been designed for the Asian proximal femur with a small deformed shape and narrow canal. In this study, the clinical and radiological results using the S-ROM-A prosthesis for Japanese patients with severe deformity due to dysplasia and excessive posterior pelvic tilt were examined. 94 hips were followed up for a mean of 55 months, with a mean age at surgery of 61 years. The primary diagnoses were 94 coxarthritis cases, including 51 dysplasia and 37 primary OA, 1 avascular necrosis, 2 traumatic arthritis, and 3 Perthes disease. Thirty-one hips had been treated with osteotomy of the hip joints. Preoperative intramedullary canal shapes were stovepipe in 23 hips, normal in 51 hips, and champagne-flute in 5 hips. The maximum pelvic inclination angle was 56°. The mean JOA score improved from 46 points preoperatively to 80 points at final follow-up. On radiological evaluation of the fixation of the implants according to the Engh classification, 92 (97%) hips were classified as "bone ingrown fixation." In primary THA, using the S-ROM-A prosthesis for Asian patients with proximal femoral deformity, even after osteotomy and with posterior pelvic tilt, provided good short- to midterm results.

  6. Total Hip Arthroplasty Using the S-ROM-A Prosthesis for Anatomically Difficult Asian Patients

    Directory of Open Access Journals (Sweden)

    Akira Hozumi

    2015-01-01

    Full Text Available Background. The S-ROM-A prosthesis has been designed for the Asian proximal femur with a small deformed shape and narrow canal. In this study, the clinical and radiological results using the S-ROM-A prosthesis for Japanese patients with severe deformity due to dysplasia and excessive posterior pelvic tilt were examined. Methods. 94 hips were followed up for a mean of 55 months, with a mean age at surgery of 61 years. The primary diagnoses were 94 coxarthritis cases, including 51 dysplasia and 37 primary OA, 1 avascular necrosis, 2 traumatic arthritis, and 3 Perthes disease. Thirty-one hips had been treated with osteotomy of the hip joints. Preoperative intramedullary canal shapes were stovepipe in 23 hips, normal in 51 hips, and champagne-flute in 5 hips. The maximum pelvic inclination angle was 56°. Results. The mean JOA score improved from 46 points preoperatively to 80 points at final follow-up. On radiological evaluation of the fixation of the implants according to the Engh classification, 92 (97% hips were classified as “bone ingrown fixation.” Conclusion. In primary THA, using the S-ROM-A prosthesis for Asian patients with proximal femoral deformity, even after osteotomy and with posterior pelvic tilt, provided good short- to midterm results.

  7. Recognizing the elbow prosthesis on conventional radiographs

    Directory of Open Access Journals (Sweden)

    Kamilcan Oflazoglu

    2016-09-01

    Full Text Available Abstract The objective of this study was to make an overview that can be useful in determining which type and brand of prosthesis a patient has when visiting the emergency department or outpatient clinic with a periprosthetic fracture, dislocation, or implant failure. The commonly used prostheses in Europe are opted for this list. The radiographs used for this list are obtained either from the company or from our own patients. This list contains the Coonrad/Morrey total elbow prosthesis, the Nexel total elbow prosthesis, the GSB III Elbow Prosthesis, the iBP Total Elbow System, the Discovery Elbow System, the NESimplavit Elbow System, the Latitude Elbow prosthesis, the Solar Elbow, and the Souter–Strathclyde total elbow. The characteristics of each prosthesis are described.

  8. Contact dermatitis from a prosthesis.

    Science.gov (United States)

    Munoz, Carla A; Gaspari, Anthony; Goldner, Ronald

    2008-01-01

    Patients wearing a prosthesis face a wide variety of medical problems. Skin complications have long been recognized, but their prevalence is still unknown. The most frequently reported disorders are allergic contact dermatitis (ACD), acroangiodermatitis, epidermoid cysts, epidermal hyperplasia, follicular hyperkeratosis, verrucous hyperplasia, bullous diseases, hyperhidrosis, infections, malignancies, and ulcerations. Contact dermatitis represents one-third of the dermatoses in amputees wearing prostheses. All patients who are suspected of having ACD should be patch tested with standard allergen series as well as materials from the patient's own prosthesis, topical medicaments, moisturizers, and cosmetics. We report a patient with an ACD to mixed dialkyl thiourea present in the rubber parts of his below-the-knee prosthesis. Thiourea derivates are used as accelerators in the manufacture of chloroprene rubber and as fixatives in photography and photocopy paper. Allergy to thiourea is relatively uncommon; different studies have shown a prevalence of 0.7% up to 2.4% in patch-tested patients. Thiourea derivates are often the allergic sources in ACD involving high-grade rubber products made of neoprene such as diving suits, protective goggles, knee braces, and continuous positive airway pressure masks. They are also present in the rubber material of prostheses, as in the case of our patient.

  9. Malrotation of the McGhan Style 510 prosthesis.

    NARCIS (Netherlands)

    Schots, J.M.; Fechner, M.R.; Hoogbergen, M.M.; Tits, H.W.H.J.

    2010-01-01

    BACKGROUND: Anatomically shaped cohesive silicone breast implants are frequently used in aesthetic and reconstructive surgery. After successful results with the Style 410 prosthesis, McGhan (Natrelle, Allergan) introduced the Style 510 prosthesis. After using this novel prosthesis, the authors

  10. Implantable optrode design for optogenetic visual cortical prosthesis

    Science.gov (United States)

    Dong, Na; Sun, Xiaohan; Degenaar, Patrick

    2012-02-01

    The rise of optogenetic neural stimulation has opened new opportunities for neuroprosthesis such as visual cortical prosthesis, which necessitates an efficient delivery of light into the cortex. New forms of photosensitizing channelrhodopsin are reducing the required light intensities for stimulation, but implantable systems need to be highly efficient. Such efficiency calls for low loss in the transmission path, high coupling efficiency between the optic delivery system and optical emitter, as well as emitting efficiency from the light emitting diode. In this paper, we perform simulation results based on ray optics and illuminating theory as to the best strategy to attachment of optrode structures to Gallium Nitride-μLED arrays so as to maximize the efficiency of light delivery to the target neural tissue.Our results show that it is feasible to connect optrode elements and GaN-μLEDarrays for cortical stimulation and describe the optimisation requirements.

  11. Cross-axis adaptation improves 3D vestibulo-ocular reflex alignment during chronic stimulation via a head-mounted multichannel vestibular prosthesis

    Science.gov (United States)

    Dai, Chenkai; Fridman, Gene Y.; Chiang, Bryce; Davidovics, Natan; Melvin, Thuy-Anh; Cullen, Kathleen E.; Della Santina, Charles C.

    2012-01-01

    By sensing three-dimensional (3D) head rotation and electrically stimulating the three ampullary branches of a vestibular nerve to encode head angular velocity, a multichannel vestibular prosthesis (MVP) can restore vestibular sensation to individuals disabled by loss of vestibular hair cell function. However, current spread to afferent fibers innervating non-targeted canals and otolith endorgans can distort the vestibular nerve activation pattern, causing misalignment between the perceived and actual axis of head rotation. We hypothesized that over time, central neural mechanisms can adapt to correct this misalignment. To test this, we rendered five chinchillas vestibular-deficient via bilateral gentamicin treatment and unilaterally implanted them with a head mounted MVP. Comparison of 3D angular vestibulo-ocular reflex (aVOR) responses during 2 Hz, 50°/s peak horizontal sinusoidal head rotations in darkness on the first, third and seventh days of continual MVP use revealed that eye responses about the intended axis remained stable (at about 70% of the normal gain) while misalignment improved significantly by the end of one week of prosthetic stimulation. A comparable time course of improvement was also observed for head rotations about the other two semicircular canal axes and at every stimulus frequency examined (0.2–5 Hz). In addition, the extent of disconjugacy between the two eyes progressively improved during the same time window. These results indicate that the central nervous system rapidly adapts to multichannel prosthetic vestibular stimulation to markedly improve 3D aVOR alignment within the first week after activation. Similar adaptive improvements are likely to occur in other species, including humans. PMID:21374081

  12. P3-7: On Prototyping a Visual Prosthesis System with Artificial Retina and Optic Nerve Based on Arrayed Microfibers

    Directory of Open Access Journals (Sweden)

    Jian Hong Chen

    2012-10-01

    Full Text Available The traditional visual prosthesis system combines both a camera and a microelectrode array implanted on the visual neural network including retina, optic nerve, and visual cortex. Here, we introduce a new visual prosthesis system in which an artificial retina and optic nerve are demonstrated. The prototype of optic nerve for image transmission is comprised of arrayed PMMA microfibers with both ends connected with two planes, one functioned as retina for light reception and another attached to visual cortex. The microfibers are drawn from the thin film prepared by PMMA/chlorobenzene solution. Each micro fiber serves as an optical waveguide for the delivery of a single image pixel. It is demonstrated that with proper imaging optics, arrayed micro fibers could be lit as discrete light spots in accordance with the input image. Each micro fiber is expected to function as a stimulation unit for optical neural modulation in a visual prosthesis system.

  13. Bilateral bifid mandibular canal

    Directory of Open Access Journals (Sweden)

    Mahnaz Sheikhi

    2012-01-01

    Full Text Available One of the normal interesting variations that we may encounter in the mandible is bifid mandibular canal. This condition can lead to difficulties when performing mandibular anesthesia or during extraction of lower third molar, placement of implants, and surgery in the mandible. Therefore diagnosis of this variation is sometimes very important and necessary.

  14. Labyrinthine artery aneurysm as an internal auditory canal mass.

    Science.gov (United States)

    Diaz, Rodney C; Konia, Thomas; Brunberg, James

    2014-08-01

    We present the first case report of a labyrinthine artery aneurysm masquerading as an internal auditory canal tumor. A 72-year-old woman presented with sudden onset right facial paralysis, facial pain, hearing loss, and vertigo. She demonstrated dense right-sided facial paralysis involving all branches of the facial nerve, left beating horizontal nystagmus, and anacusis of the right ear. Magnetic resonance imaging with contrast demonstrated a 6 × 7 mm peripherally enhancing lesion with lack of central uptake filling the right internal auditory canal. The patient elected to proceed with translabyrinthine approach to the internal auditory canal for definitive resection of the mass as well as to decompress the neural structures of the internal auditory canal in an attempt to recover neural function, particularly of the facial nerve. Intraoperatively, the internal auditory canal mass was resected with minimal difficulty, with intraoperative dissection notable for brisk bleeding at the medial base of the tumor just as the tumor was dissected off its medial fibrous attachments. Final pathology of the resected mass revealed a blood vessel with mucinous degeneration of the medial layer of the vessel wall, with immunohistochemical staining confirming the presence and structure of aneurysmal blood vessel.

  15. Prosthesis infections after orthopedic joint replacement

    DEFF Research Database (Denmark)

    Song, Zhijun; Borgwardt, Lotte; Høiby, Niels

    2013-01-01

    Prosthesis-related infection is a serious complication for patients after orthopedic joint replacement, which is currently difficult to treat with antibiotic therapy. Consequently, in most cases, removal of the infected prosthesis is the only solution to cure the infection. It is, therefore...

  16. Implant complications and failures: the fixed prosthesis.

    Science.gov (United States)

    Tinsley, D; Watson, C J; Preston, A J

    2002-11-01

    The implant-retained fixed prosthesis has been advocated as an effective restoration offering significant benefits over conventional prosthetics. The success of treatment depends on careful pre-surgical planning and prosthesis design. This paper outlines some common complications encountered during the planning, fabrication and maintenance of both large and small fixed prostheses and suggests how these complications can be minimized.

  17. BIORESORBABLE POLYMERIC MENISCAL PROSTHESIS: STUDY IN RABBITS

    Science.gov (United States)

    Cardoso, Tulio Pereira; de Rezende Duek, Eliana Aparecida; Amatuzzi, Marco Martins; Caetano, Edie Benedito

    2015-01-01

    Objective: To induce growth of a neomeniscus into the pores of a prosthesis in order to protect the knee joint cartilage. Methods: 70 knees of 35 New Zealand rabbits were operated. The rabbits were five to seven months old, weighed 2 to 3.8 kilograms, and 22 were male and 13 were female. Each animal underwent medial meniscectomy in both knees during a single operation. A bioabsorbable polymeric meniscal prosthesis composed of 70% polydioxanone and 30% L-lactic acid polymer was implanted in one side. The animals were sacrificed after different postoperative time intervals. The femoral condyles and neomeniscus were subjected to histological analysis. Histograms were used to measure the degradation and absorption of the prosthesis, the growth of meniscal tissue in the prosthesis and the degree of degradation of the femoral condyle joint cartilage. Results: The data obtained showed that tissue growth histologically resembling a normal meniscus occurred, with gradual absorption of the prosthesis, and the percentages of chondrocytes on the control side and prosthesis side. Conclusion: Tissue growth into the prosthesis pores that histologically resembled the normal rabbit meniscus was observed. The joint cartilage of the femoral condyles on the prosthesis side presented greater numbers of chondrocytes in all its layers. PMID:27022549

  18. Nasal prosthesis rehabilitation: a case report

    DEFF Research Database (Denmark)

    Jain, Sumeet; Maru, Kavita; Shukla, Jyotsana

    2011-01-01

    Facial defects resulting from neoplasm, congenital malformation or trauma can be restored with facial prosthesis using different materials and retention methods to achieve life-like look and function. A nasal prosthesis can re-establish esthetic form and anatomic contours for mid-facial defects, ...... a spectacle glass frame without inserting craniofacial implants....

  19. Plasticity in the visual system is associated with prosthesis use in phantom limb pain

    OpenAIRE

    Sandra ePreißler; Caroline eDietrich; Kathrin eBlume; Hofmann, Gunther O; Miltner, Wolfgang H. R.; Thomas eWeiss

    2013-01-01

    The experience of strong phantom limb pain (PLP) in arm amputees was previously shown to be associated with structural neural plasticity in parts of the cortex that belong to dorsal and ventral visual streams. It has been speculated that this plasticity results from the extensive use of a functional prosthesis which is associated with increased visual feedback to control the artificial hand.To test this hypothesis, we reanalyzed data of cortical volumes of 21 upper limb amputees and tested th...

  20. Plasticity in the Visual System is Associated with Prosthesis Use in Phantom Limb Pain

    OpenAIRE

    Preißler, Sandra; Dietrich, Caroline; Blume, Kathrin R.; Hofmann, Gunther O; Miltner, Wolfgang H. R.; Weiss, Thomas

    2013-01-01

    The experience of strong phantom limb pain (PLP) in arm amputees was previously shown to be associated with structural neural plasticity in parts of the cortex that belong to dorsal and ventral visual streams. It has been speculated that this plasticity results from the extensive use of a functional prosthesis which is associated with increased visual feedback to control the artificial hand. To test this hypothesis, we reanalyzed data of cortical volumes of 21 upper limb amputees and tested t...

  1. Managing curved canals

    Directory of Open Access Journals (Sweden)

    Iram Ansari

    2012-01-01

    Full Text Available Dilaceration is the result of a developmental anomaly in which there has been an abrupt change in the axial inclination between the crown and the root of a tooth. Dilaceration can be seen in both the permanent and deciduous dentitions, and is more commonly found in posterior teeth and in maxilla. Periapical radiographs are the most appropriate way to diagnose the presence of root dilacerations. The controlled regularly tapered preparation of the curved canals is the ultimate challenge in endodontics. Careful and meticulous technique will yield a safe and sufficient enlargement of the curved canals. This article gives a review of the literature and three interesting case reports of root dilacerations.

  2. Followup of a Dog with an Intraocular Silicone Prosthesis Combined with an Extraocular Glass Prosthesis

    Directory of Open Access Journals (Sweden)

    Gwendolyna Romkes

    2012-01-01

    Full Text Available Because of unpredictable corneal changes, evisceration and implantation of a silicone prosthesis does not always lead to a satisfying cosmetic result. This paper describes the use of an intraocular silicone prosthesis in combination with an extraocular glass prosthesis and shows a followup of two and a half years in a nonexperimental study. An intraocular silicone prosthesis was implanted after evisceration of the left eye in a five-month-old Bernese mountain dog. A glass prosthesis was fitted four weeks after evisceration. Two and a half years after the operation, the dog is in good health and free of medication. No short-term or long-term complications were seen. The owners do not have trouble with handling the glass prosthesis. The combination of both prostheses shows a perfect solution to retrieve a normal looking and moving eye after evisceration.

  3. Stretch due to Penile Prosthesis Reservoir Migration

    Directory of Open Access Journals (Sweden)

    E. Baten

    2016-03-01

    Full Text Available A 43-year old patient presented to the emergency department with stretch, due to impossible deflation of the penile prosthesis, 4 years after successful implant. A CT-scan showed migration of the reservoir to the left rectus abdominis muscle. Refilling of the reservoir was inhibited by muscular compression, causing stretch. Removal and replacement of the reservoir was performed, after which the prosthesis was well-functioning again. Migration of the penile prosthesis reservoir is extremely rare but can cause several complications, such as stretch.

  4. Canal plane dynamic visual acuity in superior canal dehiscence.

    Science.gov (United States)

    Janky, Kristen L; Zuniga, M Geraldine; Ward, Bryan; Carey, John P; Schubert, Michael C

    2014-06-01

    1) To characterize normal, horizontal active dynamic visual acuity (DVA) and passive canal plane head thrust DVA (htDVA) across ages to establish appropriate control data and 2) to determine whether horizontal active DVA and passive canal plane htDVA are significantly different in individuals with superior canal dehiscence syndrome (SCDS) before and after surgical repair in the acute (within 10 d) and nonacute stage (>6 wk). Prospective study. Tertiary referral center Patients diagnosed with SCDS (n = 32) and healthy control subjects (n = 51). Surgical canal plugging on a subset of patients. Static visual acuity (SVA), active horizontal DVA, and canal plane htDVA. Visual acuity (SVA, active DVA, and htDVA) declines with age. In SCDS, SVA and active DVA are not significantly affected in individuals after surgical canal plugging; however, htDVA in the plane of the affected canal is significantly worse after canal plugging. Age-based normative data are necessary for DVA testing. In SCDS, htDVA in the plane of the affected canal is normal before surgery but permanently reduced afterward.

  5. Distributed control at Love canal

    Energy Technology Data Exchange (ETDEWEB)

    McPherson, G.; Rider, G.J.; Sadowski, B.; Moore, M.

    1994-09-01

    Love Canal is known worldwide as the site of one of the worst non-nuclear environmental disasters in modern history. For 12 years, a Niagara Falls, New York chemical company used the canal bed as a chemical dump. This article discusses the computerized control of equipment used to remove the toxic materials from the ground under Love Canal, and how the minimization of maintenance is reducing maintenance costs and increasing operator safety.

  6. Analysis of sedimentation of canals

    Directory of Open Access Journals (Sweden)

    Agunwamba, J.C.,

    2013-03-01

    Full Text Available The dredged canals in the Niger Delta coastal flood plain are being threatened by siltation. This study is limited to those canals in Rivers State of Nigeria, which are under the influence of tidal waves. A total of eight canals were considered with four each from Ekulama and Cawthorne Channel. Different approaches were used to carry out this study, which includes field reconnaissance survey, hydrographic survey, soil sample analysis and collection of all available data and information. The typical bed materials size (D50 is approximately 0.01mm; which gives a settling velocity of 0.09mm/sec using stroke’s law. Hydrographic survey of the canals from 1992 to 1996 revealed an average siltation rate of 2.35m/yr. A regression equation was also derived which relates the cost of dredging to canal area, rate of siltation and average aggregation. A plot of canal centre profile; entrance, middle and end cross sections showing sediment distribution along the canal profile, shows that majority of the particles that form the sediment enter the canal from the rivers. The sedimentation is caused by the reduction in water current, which has average value of 0.0145m/sec. The bathyorographical check on the canals revealed that the sum of the two exterior angles of the canal with the river at the point of connection has to lie within 1800 + 50 for an effective flow that will minimize settlement of particles. In addition, the canals should be constructed to start and terminate on a moving water body, to avoid dead ends. A regression equation was determined which relates the cost of dredging to canal area, rate of siltation and average aggradations.

  7. Choosing a Breast Prosthesis: A Survivor's Perspective

    Science.gov (United States)

    ... Request Permissions Choosing a Breast Prosthesis: A Survivor’s Perspective Andrea Zinn June 16, 2015 · Amber Bauer, ASCO ... body image breast cancer coping decision making patient perspective survivorship tips Related Resources: Breast Cancer - Introduction Talking ...

  8. Lumbar canal stenosis.

    Science.gov (United States)

    Mazanec, D J; Drucker, Y; Segal, A M

    1997-04-01

    Lumbar canal stenosis is an increasingly recognized condition in patients more than 65 years of age. The clinical syndrome is dominated by neurogenic claudication. The natural history of the Condition is not yet well described. Long-term results of surgical therapy are frequently disappointing, and reoperation is required in more than 10% of patients. Nonoperative treatment options include physical therapy exercise programs, calcitonin, analgesics, and epidural steroid injections. A clinical pathway for management of symptomatic stenosis, emphasizing an initial nonoperative approach, is suggested.

  9. Spinal canal stenosis; Spinalkanalstenose

    Energy Technology Data Exchange (ETDEWEB)

    Papanagiotou, P.; Boutchakova, M. [Klinikum Bremen-Mitte/Bremen-Ost, Klinik fuer Diagnostische und Interventionelle Neuroradiologie, Bremen (Germany)

    2014-11-15

    Spinal stenosis is a narrowing of the spinal canal by a combination of bone and soft tissues, which can lead to mechanical compression of spinal nerve roots or the dural sac. The lumbal spinal compression of these nerve roots can be symptomatic, resulting in weakness, reflex alterations, gait disturbances, bowel or bladder dysfunction, motor and sensory changes, radicular pain or atypical leg pain and neurogenic claudication. The anatomical presence of spinal canal stenosis is confirmed radiologically with computerized tomography, myelography or magnetic resonance imaging and play a decisive role in optimal patient-oriented therapy decision-making. (orig.) [German] Die Spinalkanalstenose ist eine umschriebene, knoechern-ligamentaer bedingte Einengung des Spinalkanals, die zur Kompression der Nervenwurzeln oder des Duralsacks fuehren kann. Die lumbale Spinalkanalstenose manifestiert sich klinisch als Komplex aus Rueckenschmerzen sowie sensiblen und motorischen neurologischen Ausfaellen, die in der Regel belastungsabhaengig sind (Claudicatio spinalis). Die bildgebende Diagnostik mittels Magnetresonanztomographie, Computertomographie und Myelographie spielt eine entscheidende Rolle bei der optimalen patientenbezogenen Therapieentscheidung. (orig.)

  10. Complete atrioventricular canal

    Directory of Open Access Journals (Sweden)

    Limongelli Giuseppe

    2006-04-01

    Full Text Available Abstract Complete atrioventricular canal (CAVC, also referred to as complete atrioventricular septal defect, is characterised by an ostium primum atrial septal defect, a common atrioventricular valve and a variable deficiency of the ventricular septum inflow. CAVC is an uncommon congenital heart disease, accounting for about 3% of cardiac malformations. Atrioventricular canal occurs in two out of every 10,000 live births. Both sexes are equally affected and a striking association with Down syndrome was found. Depending on the morphology of the superior leaflet of the common atrioventricular valve, 3 types of CAVC have been delineated (type A, B and C, according to Rastelli's classification. CAVC results in a significant interatrial and interventricular systemic-to-pulmonary shunt, thus inducing right ventricular pressure and volume overload and pulmonary hypertension. It becomes symptomatic in infancy due to congestive heart failure and failure to thrive. Diagnosis of CAVC might be suspected from electrocardiographic and chest X-ray findings. Echocardiography confirms it and gives anatomical details. Over time, pulmonary hypertension becomes irreversible, thus precluding the surgical therapy. This is the reason why cardiac catheterisation is not mandatory in infants (less than 6 months but is indicated in older patients if irreversible pulmonary hypertension is suspected. Medical treatment (digitalis, diuretics, vasodilators plays a role only as a bridge toward surgery, usually performed between the 3rd and 6th month of life.

  11. [Treatment of the complex intraarticular fracture of the distal humerus with the latitude elbow prosthesis].

    Science.gov (United States)

    Burkhart, Klaus Josef; Müller, Lars Peter; Schwarz, Christina; Mattyasovszky, Stefan Georg; Rommens, Pol Maria

    2010-07-01

    Therapy of comminuted intraarticular distal humerus fractures in elderly patients with primary total elbow arthroplasty to achieve stable and painless function. Use of "third-generation" elbow prosthesis with the following options:--linked total elbow arthroplasty,--unlinked total elbow arthroplasty,--either with or without radial head replacement,--hemiarthroplasty. Comminuted intraarticular distal humerus fractures with poor bone quality, in which stable osteosynthesis is impossible. Failure of internal fixation without the technical possibility of revision osteosynthesis. Posttraumatic osteoarthritis or rheumatoid arthritis. Open fractures (Gustilo-Anderson type II or III) or contaminated wounds should not initially be treated with total elbow arthroplasty. Prosthetic replacement may be considered after consolidation of the soft tissue. Low compliance, high functional demands. Paralysis of the biceps muscle. Supine positioning of the patient. Surgical approach after Bryan-Morrey. Anterior transposition of the ulnar nerve. Preparation of the insertion of the triceps at the distal humerus, capsule and proximal ulna. Reflection of the triceps in continuity with the ulnar periosteum and the forearm fascia. Attempt at reconstruction of the epicondyles to achieve ligamentary stability and to implant an unlinked prosthesis. If this is technically not possible, the prosthesis is linked at the end of the operation. Removal of the distal humerus fragments. Determination of the prosthesis size. Detection of the extension-flexion axis. Opening of the humeral intramedullary canal. Determination of the offset. Preparation of the humeral prosthesis repository. Placement of the trial prosthesis. Potential implantation of a hemiprosthesis, if radial head, proximal ulna and ligaments are unaffected. Otherwise preparation of the ulnar prosthesis repository. If the radial head is unaffected, it can be preserved. Otherwise it has to be resected and preferably replaced. Placement of

  12. The Prevalence of Patient-Prosthesis Mismatch Can Be Reduced Using the Trifecta Aortic Prosthesis.

    Science.gov (United States)

    Hernandez-Vaquero, Daniel; Diaz, Rocio; Pascual, Isaac; Rozado, Jose; De la Hera, Jesus M; Leon, Victor; Avanzas, Pablo; Martín, Maria; García-Iglesias, Daniel; Calvo, David; Silva, Jacobo; Moris, César

    2018-01-01

    Some important studies have shown that patient-prosthesis mismatch is a frequent occurrence after surgical aortic valve replacement that impairs survival. The Trifecta valve (St. Jude Medical Inc, St. Paul, MN) has special architecture designed to achieve the best hemodynamic profile. The aim of this study was to determine the prevalence of mismatch when using this prosthesis. This study included 1,302 patients at 3 months postoperatively, 339 patients with a Trifecta prosthesis and 963 patients (the control group) with a Mitroflow aortic valve (Sorin Group Inc, Mitroflow Division, Vancouver, Canada). Multinomial multivariate logistic regression was calculated to estimate the association between the Trifecta prosthesis and moderate or severe patient-prosthesis mismatch. Any degree of mismatch was present in 5.9% of the Trifecta group and in 42.4% in the Mitroflow group. Moderate patient-prosthesis mismatch was present in 3.8% of the patients with a Trifecta valve and in 32.6% in the Mitroflow group. Severe mismatch was present in 2.1% of the patients with a Trifecta prosthesis and in 9.8% of the patients with a Mitroflow valve. All differences were statistically significant (p < 0.001). The odds ratio of the Trifecta prosthesis as protector against mismatch was 16.9 (95% confidence interval, 9.5 to 30.4) and 11.9 (95% confidence interval, 5.3 to 26.7) for moderate or severe mismatch, respectively. The prevalence of patient-prosthesis mismatch using the Trifecta aortic prosthesis is extraordinary low. This finding may have great clinical repercussions in patients undergoing surgical aortic valve replacement. Copyright © 2018 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  13. Different techniques in fabrication of ocular prosthesis.

    Science.gov (United States)

    Cevik, Pinar; Dilber, Erhan; Eraslan, Oguz

    2012-11-01

    Loss of an eye caused by cancer, trauma, or congenital defect creates a deep psychological impact on an individual's life especially social and professional life. Custom-made prosthesis, compared to stock prosthesis, provides a better fit to the eye socket, better cosmetic results, and less discomfort to the patient in the long term. The main objective of this article was to describe 3 different alternative and practical techniques of fabricating custom-made ocular prosthesis. An impression of anophthalmic socket was made with the addition of cured silicone-based precision impression material in all techniques. A master cast was prepared and duplicated with condensation silicone. A self-cure acrylic resin was polymerized in the silicone model and was fitted into the patient's eye socket. A digital photograph of the patient's iris was made using a digital camera and printed on good-quality photo paper in various shades and sizes in the first and the second techniques. Then the photo paper was coated with PVC so as not to allow any color flowing. The proper iris was then inserted to the acrylic base. The prosthesis was final processed using orthodontic heat polymerizing clear acrylic resin.In the other technique, after the trying-in process with wax pattern, an acrylic base was fabricated using heat polymerizing scleral acrylic resin. The prosthetic iris was fabricated from a transparent contact lens by painting the lens with watercolor paints and attaching it to an acrylic resin with tissue conditioner. The final process was made with heat polymerizing transparent acrylic resin. Custom-made prosthesis allows better esthetic and functional results to the patient in comparison to stock prosthesis. Further follow-up is necessary to check the condition and fit of the ocular prosthesis in such patients.

  14. Penetrating multichannel stimulation and recording electrodes in auditory prosthesis research.

    Science.gov (United States)

    Anderson, David J

    2008-08-01

    Microelectrode arrays offer the auditory systems physiologists many opportunities through a number of electrode technologies. In particular, silicon substrate electrode arrays offer a large design space including choice of layout plan, range of surface areas for active sites, a choice of site materials and high spatial resolution. Further, most designs can double as recording and stimulation electrodes in the same preparation. Scala tympani auditory prosthesis research has been aided by mapping electrodes in the cortex and the inferior colliculus to assess the CNS responses to peripheral stimulation. More recently silicon stimulation electrodes placed in the auditory nerve, cochlear nucleus and the inferior colliculus have advanced the exploration of alternative stimulation sites for auditory prostheses. Multiplication of results from experimental effort by simultaneously stimulating several locations, or by acquiring several streams of data synchronized to the same stimulation event, is a commonly sought after advantage. Examples of inherently multichannel functions which are not possible with single electrode sites include (1) current steering resulting in more focused stimulation, (2) improved signal-to-noise ratio (SNR) for recording when noise and/or neural signals appear on more than one site and (3) current source density (CSD) measurements. Still more powerful are methods that exploit closely-spaced recording and stimulation sites to improve detailed interrogation of the surrounding neural domain. Here, we discuss thin-film recording/stimulation arrays on silicon substrates. These electrode arrays have been shown to be valuable because of their precision coupled with reproducibility in an ever expanding design space. The shape of the electrode substrate can be customized to accommodate use in cortical, deep and peripheral neural structures while flexible cables, fluid delivery and novel coatings have been added to broaden their application. The use of

  15. 21 CFR 872.3950 - Glenoid fossa prosthesis.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3950 Glenoid fossa prosthesis. (a) Identification. A glenoid fossa prosthesis is a device that is intended to be implanted in the temporomandibular...

  16. Middle ear vibrations with SMA prosthesis. Experimental research

    Directory of Open Access Journals (Sweden)

    Rusinek Rafal

    2018-01-01

    Full Text Available The paper focuses on experimental research of a middle ear prosthesis made of shape memory alloy. The prosthesis provides better adjustment to individual patient than classical prosthesis. The shape memory prosthesis is implemented to a fresh temporal bone and vibrations of the round window are recorded by means of the Laser Doppler Vibrometer. Finally, the results are presented in the form of transfer function and compared to the intact and damaged middle ear.

  17. Hood Canal Steelhead - Hood Canal Steelhead Supplementation Experiment

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Hood Canal Steelhead Project is a 17-year before-after-control-impact experiment that tests the effects of supplementation on natural steelhead populations in...

  18. 21 CFR 872.3960 - Mandibular condyle prosthesis.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3960 Mandibular condyle prosthesis. (a) Identification. A mandibular condyle prosthesis is a device that is intended to be implanted in the human jaw to... requirement for premarket approval for any mandibular condyle prosthesis intended to be implanted in the human...

  19. 21 CFR 890.3500 - External assembled lower limb prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false External assembled lower limb prosthesis. 890.3500... (CONTINUED) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3500 External assembled lower limb prosthesis. (a) Identification. An external assembled lower limb prosthesis...

  20. 21 CFR 874.3695 - Mandibular implant facial prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mandibular implant facial prosthesis. 874.3695... (CONTINUED) MEDICAL DEVICES EAR, NOSE, AND THROAT DEVICES Prosthetic Devices § 874.3695 Mandibular implant facial prosthesis. (a) Identification. A mandibular implant facial prosthesis is a device that is...

  1. 21 CFR 888.3780 - Wrist joint polymer constrained prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint polymer constrained prosthesis. 888... SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3780 Wrist joint polymer constrained prosthesis. (a) Identification. A wrist joint polymer constrained prosthesis is a device made of...

  2. Method for Constructing Standardized Simulated Root Canals.

    Science.gov (United States)

    Schulz-Bongert, Udo; Weine, Franklin S.

    1990-01-01

    The construction of visual and manipulative aids, clear resin blocks with root-canal-like spaces, for simulation of root canals is explained. Time, materials, and techniques are discussed. The method allows for comparison of canals, creation of any configuration of canals, and easy presentation during instruction. (MSE)

  3. Fabrication of a custom ocular prosthesis.

    Science.gov (United States)

    Sethi, Tania; Kheur, Mohit; Haylock, Colin; Harianawala, Husain

    2014-01-01

    Defects of the eye may follow removal of a part of or the entire orbit. This results in the patient becoming visually, esthetically and psychologically handicapped. Restoring the defect with a silicone- or acrylic-based prosthesis not only restores esthetics but also gives back the lost confidence to the patient. This is a case report of a patient with a 'pthisical eye' and details the steps in fabrication of an ocular prosthesis. Particular attention has been given to the laboratory process in this technique to minimize the residual monomer content in the artificial eye.

  4. BIORESORBABLE POLYMERIC MENISCAL PROSTHESIS: STUDY IN RABBITS

    OpenAIRE

    Cardoso, Tulio Pereira; de Rezende Duek, Eliana Aparecida; Amatuzzi,Marco Martins; Caetano, Edie Benedito

    2010-01-01

    Objective: To induce growth of a neomeniscus into the pores of a prosthesis in order to protect the knee joint cartilage. Methods: 70 knees of 35 New Zealand rabbits were operated. The rabbits were five to seven months old, weighed 2 to 3.8 kilograms, and 22 were male and 13 were female. Each animal underwent medial meniscectomy in both knees during a single operation. A bioabsorbable polymeric meniscal prosthesis composed of 70% polydioxanone and 30% L-lactic acid polymer was implanted in on...

  5. Looking back at Love Canal

    Energy Technology Data Exchange (ETDEWEB)

    Deegan, J. Jr.

    1987-05-01

    In the first part of this series (ES and T, April 1987, pp. 328-31) it was pointed out that the methods and conclusions of EPA's Love Canal Study were the subject of some controversy in the environmental community. Others defended the agency's approaches and methods. Part 2 makes no attempt to resolve the controversy; its purpose is to present the results and conclusions of the Love Canal.

  6. MR findings of spondylolisthesis: assessment of associated spinal and neural foraminal stenosis

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Seung; Kang, Heung Sik; Yoon, Hye Kyung; Kim, Chu Wan [Seoul National University College of Medicine, Seoul (Korea, Republic of)

    1994-02-15

    To assess the spinal canal and neural foraminal stenosis associated with spondylolisthesis on MR imaging. We retrospectively analysed MR findings of 63 cases of spondylolisthesis(degenerative type: 23 cases, isthmic type: 40 cases) regarding the type and grade of spondylolisthesis, presence or absence of associated spinal canal stenosis, and the severity of associated neural foraminal stenosis. Central canal stenosis were more frequent in degenerative type(91%) than isthmic type(33%), and more frequent in grade II spondylolisthesis of degenerative type(100%) and isthmic type(89%) than in grade I spondylolisthesis of degenerative type(45%) and isthmic type(20%). There was positive correlation between the severity of neural foraminal stenosis and the grade of spondylolisthesis, whereas there was no significant difference between degenerative and isthmic types. Degenerative spondylolisthesis were frequently associated with central canal stenosis more than isthmic type. When the grade of spondylolisthesis was higher, it was more frequently associated with central canal stenosis and severe neural foraminal stenosis.

  7. Whole Body Awareness for Controlling a Robotic Transfemoral Prosthesis

    Directory of Open Access Journals (Sweden)

    Andrea Parri

    2017-05-01

    Full Text Available Restoring locomotion functionality of transfemoral amputees is essential for early rehabilitation treatment and for preserving mobility and independence in daily life. Research in wearable robotics fostered the development of innovative active mechatronic lower-limb prostheses designed with the goal to reduce the cognitive and physical effort of lower-limb amputees in rehabilitation and daily life activities. To ensure benefits to the users, active mechatronic prostheses are expected to be aware of the user intention and properly interact in a closed human-in-the-loop paradigm. In the state of the art various cognitive interfaces have been proposed to online decode the user's intention. Electromyography in combination with mechanical sensing such as inertial or pressure sensors is a widely adopted solution for driving active mechatronic prostheses. In this framework, researchers also explored targeted muscles re-innervation for an objective-oriented surgical amputation promoting wider usability of active prostheses. However, information kept by the neural component of the cognitive interface deteriorates in a prolonged use scenario due to electrodes-related issues, thereby undermining the correct functionality of the active prosthesis. The objective of this work is to present a novel controller for an active transfemoral prosthesis based on whole body awareness relying on a wireless distributed non-invasive sensory apparatus acting as cognitive interface. A finite-state machine controller based on signals monitored from the wearable interface performs subject-independent intention detection of functional tasks such as ground level walking, stair ascent, and sit-to-stand maneuvres and their main sub-phases. Experimental activities carried out with four transfemoral amputees (among them one dysvascular demonstrated high reliability of the controller capable of providing 100% accuracy rate in treadmill walking even for weak subjects and low walking

  8. A running controller for a powered transfemoral prosthesis.

    Science.gov (United States)

    Huff, Amanda M; Lawson, Brian E; Goldfarb, Michael

    2012-01-01

    This paper describes a running controller for a powered knee and ankle prosthesis. The running controller was implemented on a powered prosthesis prototype and evaluated by a transfemoral amputee subject running on a treadmill at a speed of 2.25 m/s (5.0 mph). The ability of the prosthesis and controller to provide the salient features of a running gait was assessed by comparing the kinematics of running provided by the powered prosthesis to the averaged kinematics of five healthy subjects running at the same speed. This comparison indicates that the powered prosthesis and running controller are able to provide essential features of a healthy running gait.

  9. Case Report: Magnetically retained silicone facial prosthesis ...

    African Journals Online (AJOL)

    Prosthetic camouflaging of facial defects and use of silicone maxillofacial material are the alternatives to the surgical retreatment. Silicone elastomers provide more options to clinician for customization of the facial prosthesis which is simple, esthetically good when coupled with bio magnets for retention. Key words: Magnet ...

  10. Fusion around cervical disc prosthesis: case report.

    NARCIS (Netherlands)

    Bartels, R.H.M.A.; Donk, R.

    2005-01-01

    OBJECTIVE AND IMPORTANCE: Cervical arthroplasty is a relatively new method to maintain motion after cervical anterior discectomy. Two cases are presented in which bony fusion occurred around a cervical disc prosthesis. CLINICAL PRESENTATION: A 30-year-old man and a 49-year-old woman underwent a

  11. Reading visual Braille with a retinal prosthesis

    Directory of Open Access Journals (Sweden)

    Thomas Zaccarin Lauritzen

    2012-11-01

    Full Text Available Retinal prostheses, which restore partial vision to patients blinded by outer retinal degeneration, are currently in clinical trial. The Argus II retinal prosthesis system was recently awarded CE approval for commercial use in Europe. While retinal prosthesis users have achieved remarkable visual improvement to the point of reading letters and short sentences, the reading process is still fairly cumbersome. This study investigates the possibility of using an epiretinal prosthesis to stimulate visual Braille as a sensory substitution for reading written letters and words. The Argus II retinal prosthesis system, used in this study, includes a 10 x 6 electrode array implanted epiretinally, a tiny video camera mounted on a pair of glasses, and a wearable computer that processes the video and determines the stimulation current of each electrode in real time. In the Braille reading system, individual letters are created by a subset of dots from a 3 by 2 array of six dots. For the visual Braille experiment, a grid of six electrodes was chosen out of the 10 x 6 Argus II array. Groups of these electrodes were then directly stimulated (bypassing the camera to create visual percepts of individual Braille letters. Experiments were performed in a single subject. Single letters were stimulated in an alternative forced choice (AFC paradigm, and short 2-4-letter words were stimulated (one letter at a time in an open-choice reading paradigm. The subject correctly identified 89% of single letters, 80% of 2-letter, 60% of 3-letter, and 70% of 4-letter words. This work suggests that text can successfully be stimulated and read as visual Braille in retinal prosthesis patients.

  12. Reading visual braille with a retinal prosthesis.

    Science.gov (United States)

    Lauritzen, Thomas Z; Harris, Jordan; Mohand-Said, Saddek; Sahel, Jose A; Dorn, Jessy D; McClure, Kelly; Greenberg, Robert J

    2012-01-01

    Retinal prostheses, which restore partial vision to patients blinded by outer retinal degeneration, are currently in clinical trial. The Argus II retinal prosthesis system was recently awarded CE approval for commercial use in Europe. While retinal prosthesis users have achieved remarkable visual improvement to the point of reading letters and short sentences, the reading process is still fairly cumbersome. This study investigates the possibility of using an epiretinal prosthesis to stimulate visual braille as a sensory substitution for reading written letters and words. The Argus II retinal prosthesis system, used in this study, includes a 10 × 6 electrode array implanted epiretinally, a tiny video camera mounted on a pair of glasses, and a wearable computer that processes the video and determines the stimulation current of each electrode in real time. In the braille reading system, individual letters are created by a subset of dots from a 3 by 2 array of six dots. For the visual braille experiment, a grid of six electrodes was chosen out of the 10 × 6 Argus II array. Groups of these electrodes were then directly stimulated (bypassing the camera) to create visual percepts of individual braille letters. Experiments were performed in a single subject. Single letters were stimulated in an alternative forced choice (AFC) paradigm, and short 2-4-letter words were stimulated (one letter at a time) in an open-choice reading paradigm. The subject correctly identified 89% of single letters, 80% of 2-letter, 60% of 3-letter, and 70% of 4-letter words. This work suggests that text can successfully be stimulated and read as visual braille in retinal prosthesis patients.

  13. The Phenix expandable prosthesis: early American experience.

    Science.gov (United States)

    Wilkins, R M; Soubeiran, A

    2001-01-01

    One of the major dilemmas in limb preservation in skeletally immature children involves the ability to maintain leg length equality. Many attempts have been made to design a prosthesis that could be expanded easily either nonoperatively or through a minor surgical procedure. Most of these designs have had mechanical difficulty or the lengthening procedure becomes a major surgical endeavor. The Phenix technology has been used in France for several years. The basic principle involves storage of energy in a spring which is maintained compressed by an original locking system. Once implanted, prosthetic lengthening is achieved via exposure to an external electromagnetic field that pilots the locking system and allows controlled release of the spring energy. Seven Phenix prostheses have been implanted in six patients. All patients had been treated for Stage II-B osteosarcoma. Six of the seven prostheses were implanted during revision procedures in salvage situations; one prosthesis was implanted during an index procedure. The surgical procedures were completed without complications. One patient sustained a fracture of the prosthesis in a fall and had an infection develop after implantation of the second prosthesis. Twenty-one expansions have been performed in six patients (mean lengthening at each procedure, 8 mm). There were no acute complications attributable to the lengthening procedure. Prosthetic expansions required an average of 20 to 30 seconds and were accompanied by very mild discomfort, if any. Most patients were given an oral analgesic either before or during the lengthening procedure. The Phenix prosthesis shows promise in handling the difficult problem of limb preservation in a growing child. Additional investigation is underway regarding limb lengthening and other dynamic applications.

  14. Performance sustaining intracortical neural prostheses

    Science.gov (United States)

    Nuyujukian, Paul; Kao, Jonathan C.; Fan, Joline M.; Stavisky, Sergey D.; Ryu, Stephen I.; Shenoy, Krishna V.

    2014-12-01

    Objective. Neural prostheses, or brain-machine interfaces, aim to restore efficient communication and movement ability to those suffering from paralysis. A major challenge these systems face is robust performance, particularly with aging signal sources. The aim in this study was to develop a neural prosthesis that could sustain high performance in spite of signal instability while still minimizing retraining time. Approach. We trained two rhesus macaques implanted with intracortical microelectrode arrays 1-4 years prior to this study to acquire targets with a neurally-controlled cursor. We measured their performance via achieved bitrate (bits per second, bps). This task was repeated over contiguous days to evaluate the sustained performance across time. Main results. We found that in the monkey with a younger (i.e., two year old) implant and better signal quality, a fixed decoder could sustain performance for a month at a rate of 4 bps, the highest achieved communication rate reported to date. This fixed decoder was evaluated across 22 months and experienced a performance decline at a rate of 0.24 bps yr-1. In the monkey with the older (i.e., 3.5 year old) implant and poorer signal quality, a fixed decoder could not sustain performance for more than a few days. Nevertheless, performance in this monkey was maintained for two weeks without requiring additional online retraining time by utilizing prior days’ experimental data. Upon analysis of the changes in channel tuning, we found that this stability appeared partially attributable to the cancelling-out of neural tuning fluctuations when projected to two-dimensional cursor movements. Significance. The findings in this study (1) document the highest-performing communication neural prosthesis in monkeys, (2) confirm and extend prior reports of the stability of fixed decoders, and (3) demonstrate a protocol for system stability under conditions where fixed decoders would otherwise fail. These improvements to decoder

  15. Comparison of energy cost in transtibial amputees using "prosthesis" and "crutches without prosthesis" for walking activities.

    Science.gov (United States)

    Mohanty, R K; Lenka, P; Equebal, A; Kumar, R

    2012-05-01

    In a survey of 100 transtibial amputees (TTA) in the study place, it was noticed that nearly 30% of total activities performed by crutches. It was recorded nearly 52% of the amputees were totally independent, 39% had to use a crutch or cane and only 9% need not used any devices simply because they are unaware of current technology or availability. Out of 39 TTA, nine used crutches only for performing daily activities while 30 used both prosthesis and crutch. Walking is a major activity in lower limb amputees and therefore it is imperative to know the energy cost in both the mobility devices (prosthesis and crutches without prosthesis) for walking activities. The purpose of this study was to quantify and compare the difference in energy cost between the two most commonly used assistive devices (prosthesis and axillary crutches) in adults with Transtibial amputation by indirect calorimetric method at the self-selected speed in plane surface walking. Thirty adults who had a unilateral transtibial amputation participated in this study. Oxygen consumption was measured with a Cosmed K4 b(2) oxygen analysis telemetry unit (Rome, Italy) as the participants walked over level ground for 30 meters at a self-selected speed. The variables that were analyzed were VO(2) rate (mL/min), VO(2) cost (mL/kg/m), heart rate (bpm), self-selected walking velocity (m/min) and energy expenditure per minute (Kcal/min). It was observed that VO(2) uptake rate and EE comparisons were highly significant for both prosthesis and crutches without prosthesis walking in adults with transtibial amputation (Ptranstibial amputation using prosthesis walked with 21% more efficient in terms of VO(2) uptake rate and 92% more efficient in terms of EE/min as compared to crutches without prosthesis. The data on energy cost indicates that all below knee amputee groups walk with less effort by using prosthesis. It may be concluded that crutches without prosthesis may not be used as a permanent rehabilitative

  16. El Canal del Atazar I

    Directory of Open Access Journals (Sweden)

    López de Berges y de los Santos, Emilio

    1967-03-01

    Full Text Available The Atazar Canal helps to supply Madrid with water, from the rivers Lozoya, Jarama and Sorbe. The section which operates at present starts at the Torrelaguna dam and finishes at the El Goloso reservoir. Later a further section will be added, from the Atazar dam, on the Lozoya river, to link up with the control dam at Torrelaguna. The canal capacity is 16 m3/sec, and it is 43.47 km long. It has a slope of 4/10.000. The cross section is similar to that of the Jarama canal, already built. There are interconnections between this canal and the Canal Alto, which previously supplied the high and medium part of Madrid. To overcome the ground unevenness 5 syphons have been built, the most important of which is the Colmenar Goloso syphon, which is 10.88 km in length. Construction commenced on December 10, 1962, and water reached Madrid on June 15th, 1966. The initial budget for this project was 1,500 million pesetas.El canal del Atazar refuerza considerablemente el abastecimiento de aguas a Madrid, procedentes de los ríos Lozoya, Jarama y, en un próximo futuro, del Sorbe. El tramo, actualmente en funcionamiento, empieza en el salto de Torrelaguna y finaliza en los depósitos de El Goloso. Más adelante se completará su trazado mediante un nuevo tramo que partirá del embalse de Atazar, en el Lozoya, para unirse al actual en el depósito regulador de Torrelaguna. Su capacidad es de 16 m3/s; su longitud, 43,471 km, y su pendiente, 4 diezmilésimas. La sección tipo es análoga a la del canal del Jarama, de construcción anterior. Mediante la oportuna obra de transvase se realizan intercambios entre este Canal y el Canal Alto que abastecía anteriormente la parte media y alta de la capital. Para salvar los desniveles del terreno se han construido 5 sifones, siendo el más importante el de Colmenar-Goloso, con una longitud de 10,8S4 km. El comienzo de las obras tuvo lugar el 10 de diciembre de 1962, y el agua llegó a Madrid el 15 de junio de 1966. Su

  17. A review of in vivo animal studies in retinal prosthesis research.

    Science.gov (United States)

    Bertschinger, Dimiter R; Beknazar, Evgueny; Simonutti, Manuel; Safran, Avinoam B; Sahel, José A; Rosolen, Serge G; Picaud, Serge; Salzmann, Joel

    2008-11-01

    The development of a functional retinal prosthesis for acquired blindness is a great challenge. Rapid progress in the field over the last 15 years would not have been possible without extensive animal experimentation pertaining to device design and fabrication, biocompatibility, stimulation parameters and functional responses. This paper presents an overview of in vivo animal research related to retinal prosthetics, and aims to summarize the relevant studies. A Pubmed search of the English language literature was performed. The key search terms were: retinal implant, retinal prosthesis, artificial vision, rat, rabbit, cat, dog, sheep, pig, minipig. In addition a manual search was performed based on references quoted in the articles retrieved through Pubmed. We identified 50 articles relevant to in vivo animal experimentation directly related to the development of a retinal implant. The highest number of publications related to the cat (n = 18). The contribution of animal models to the development of retinal prosthetic devices has been enormous, and has led to human feasibility studies. Grey areas remain regarding long-term tissue-implant interactions, biomaterials, prosthesis design and neural adaptation. Animals will continue to play a key role in this rapidly evolving field.

  18. Ultrasonographic evidence of Gatekeeper™ prosthesis migration in patients treated for faecal incontinence: a case series.

    Science.gov (United States)

    de la Portilla, F; Reyes-Díaz, M L; Maestre, M V; Jiménez-Rodríguez, R M; García-Cabrera, A M; Vázquez-Monchul, J M; Díaz-Pavón, J M; Padillo-Ruiz, F C

    2017-03-01

    Faecal incontinence (FI) is both a medical and social problem, with an underestimated incidence. For patients with internal anal sphincter damage, implantation of biomaterial in the anal canal is a recognised treatment option. One such material, Gatekeeper™, has previously shown promising short- and medium-term results without any major complications, including displacement. The main aim of the present study is to assess the degree to which displacement of Gatekeeper prostheses may occur and to determine whether this is associated with patient outcomes. Seven patients (six females) with a mean age of 55.6 years [50.5-57.2] and a mean FI duration of 6 ± 2 years were prospectively enrolled in the study. Each subject was anaesthetised and underwent implantation of six prostheses in the intersphincteric region, guided by endoanal 3D ultrasound (3D-EAU). Follow-up was performed at post-interventional months 1, 3, and 12 (median 12 ± 4 months), during which data were obtained from a defaecation diary, Wexner scale assessment, anorectal manometry (ARM), 3D-EAU, and a health status and quality of life questionnaire (FIQL). At 3-month follow-up, 3D-EAU revealed displacement of 24/42 prostheses in 5/7 patients. Of these, 15 had migrated to the lower portion and 9 to the upper portion of the anal canal and rectum. Despite this migration, treatment was considered successful in 3/7 patients. In one patient, it was necessary to remove a prosthesis due to spontaneous extrusion. We have shown that displacement of the Gatekeeper™ prosthesis occurs, but is not associated with poorer clinical outcomes.

  19. Ab interno Schlemm's Canal Surgery.

    Science.gov (United States)

    Francis, Brian A; Akil, Handan; Bert, Benjamin B

    2017-01-01

    In primary open-angle glaucoma, the site of greatest resistance to aqueous outflow is thought to be the trabecular meshwork (TM) and inner wall of Schlemm's canal. Augmentation of the conventional (trabecular) outflow pathway can facilitate physiologic outflow and subsequently lower intraocular pressure. The most recent approach to enhancing the conventional outflow pathway is via an internal approach to the TM and Schlemm's canal. Ab interno Schlemm's canal surgery includes 4 novel surgical approaches: (1) removal of the TM and inner wall of Schlemm's canal by an internal approach (ab interno trabeculectomy), (2) implantation of a microstent to bypass the TM, (3) disruption of the TM and inner wall of Schlemm's canal via an internal approach (ab interno trabeculotomy), and (4) dilation of Schlemm's canal via an internal approach (ab interno canaloplasty). The first category includes the Trabectome (Neomedix, Tustin, CA, USA), and Kahook Dual Blade (New World Medical, Rancho Cucamonga, CA, USA). The second category includes the iStent (Glaukos, Laguna Hills, CA, USA), as well as the investigational Hydrus Microstent implant (Ivantis, Irvine, CA, USA). The third category includes gonioscopic-assisted transluminal trabeculotomy (iSciences catheter; Ellex, Adelaide, Australia), and 360° suture trabeculotomy (TRAB360, Sight Sciences, Menlo Park, CA, USA). The fourth category includes ab interno canaloplasty or AbiC (Ellex), and Visco360 (Sight Sciences). In contrast to external filtration surgeries, such as trabeculectomy and aqueous tube shunt, these procedures are categorized as internal filtration surgeries and are performed from an internal approach via gonioscopic guidance. Published results suggest that these surgical procedures are both safe and efficacious for the treatment of open-angle glaucoma. © 2017 S. Karger AG, Basel.

  20. Patient satisfaction with Mentor inflatable penile prosthesis.

    Science.gov (United States)

    Whalen, R K; Merrill, D C

    1991-06-01

    Patient satisfaction with the Mentor inflatable penile prosthesis was assessed by sending a thirty-six-item questionnaire to 251 patients who had undergone implantation of the device by the senior author (D.C.M.). A total of 152 (61%) of the patients responded. Recovery time, satisfaction, reasons for dissatisfaction, perceptions of erection quality, and psychosexual parameters were evaluated. Eight-eight percent of the patients were engaging in regular sexual activity. Depending on the definition of satisfaction, 81-89 percent of the respondents reported that they were satisfied with the prosthesis. Sixty-eight percent of the survey group were satisfied with the length, width, and firmness of their prosthetic-induced erection. The majority of patients reported improvement in psychosexual functioning after implantation. Reasons for dissatisfaction included inadequate penile length, insufficient firmness, and difficulty with inflation and deflation of the penile cylinders.

  1. Midterm results of "thrust plate" prosthesis.

    Science.gov (United States)

    Fink, Bernd; Wessel, Stephanie; Deuretzbacher, Georg; Protzen, Michael; Ruther, Wolfgang

    2007-08-01

    The aim of this investigation was to analyze the midterm results obtained with the metaphyseal fixation principle of the thrust plate prosthesis (TPP). Survival of 214 implants in 204 patients was analyzed. Clinical (Harris hip score) and radiologic examinations were carried out on 157 of 190 TPP with a postimplantation follow-up period of at least 5 years. Failure rate was 7.0% (9 aseptic and 6 septic loosening). Harris hip score increased from 36.9 +/- 13.5 points preoperatively to 91.2 +/- 13.1 points at follow-up. Eleven TPPs showed radiolucent lines not indicating prosthetic loosening. Thrust plate prosthesis is not an alternative to stemmed endoprostheses. It may be rarely indicated in very young patients where, because of their age, several revision operations can be expected.

  2. Tracheobronchial Foreign Body Aspiration: Dental Prosthesis

    Directory of Open Access Journals (Sweden)

    Ataman Köse

    2014-01-01

    Full Text Available It is important to extract foreign bodies for avoiding life-threatening complications. They can lead to death if they are not treated. Different signs and symptoms could occur according to the complete or partial airway obstruction. Foreign body aspiration is a rare incident in adults. The organic foreign materials such as foods are found to be aspirated more commonly and are usually settled in the right bronchial system. However, dental prosthesis and teeth aspirations are rare in literature. In our study, a 52-year-old male patient who had aspirated the front part of his lower dental prosthesis accidentally is presented and the foreign body is extracted by using rigid bronchoscopy. There are many causes of aspiration but dental prosthetic aspirations should be kept in mind during sleep. For this reason, dental apparatus must be taken out while asleep.

  3. [Secondary intervention after hip prosthesis (author's transl)].

    Science.gov (United States)

    Suezawa, Y; Dietschi, C

    1977-04-01

    From 1965-1975 in the orthopedical Univ. Clinic Balgrist, Zurich, there were 177 reoperations after total hip prostheses necessary. In 91 replacements the interval between first and second operation was an average of 4.1 years, in 67 prosthesis-removements 2.1 years. The follow-up showed a relationship between bacteriological culture taken before and during operation and clinical results. The decision to change or remove the prostheses should be made on the positive or negative bacteriological results.

  4. Control of dental prosthesis system with microcontroller.

    Science.gov (United States)

    Kapidere, M; Müldür, S; Güler, I

    2000-04-01

    In this study, a microcontroller-based electronic circuit was designed and implemented for dental prosthesis curing system. Heater, compressor and valve were controlled by 8-bit PIC16C64 microcontroller which is programmed using MPASM package. The temperature and time were controlled automatically by preset values which were inputted from keyboard while the pressure was kept constant. Calibration was controlled and the working range was tested. The test results showed that the system provided a good performance.

  5. Gingival prosthesis: A treatment modality for recession

    Directory of Open Access Journals (Sweden)

    Pallavi Samatha Yalamanchili

    2013-01-01

    Full Text Available Gingival recession caused due to periodontal disease disturbs patients because of sensitivity and esthetics. Gingival prosthesis may be fixed or removable and can be made from silicones, acrylics, composite resins or ceramics according to what is best suited for the case. The gingival veneer is esthetically appealing and easy to maintain. This case report describes the use of gingival veneer as a treatment modality for recession.

  6. Supersizing the penis following penile prosthesis implantation.

    Science.gov (United States)

    Shaeer, Osama

    2010-07-01

    Following implantation of a penile prosthesis, some couples are dissatisfied with penile length, girth, shaft, or glans engorgement. This may be delusional because of the procedure per se or preexisting risk factors such as neglected priapism, Peyronie's disease, radical prostatectomy, or overhanging suprapubic fat. In this work, we try to enhance penile size in patients dissatisfied with its dimensions following implantation of a penile prosthesis, using various augmentation techniques. Eighteen patients who have had penile prostheses implanted were enrolled in this study based on dissatisfaction with penile size. The complaint was relieved by counseling and administration of PDE5 inhibitors in seven patients. Two patients had elongation, girth augmentation, and glans injection; six had elongation and girth augmentation; and two had elongation and glans injection. Penile size, satisfaction, and sexual function. Average preoperative length and girth were 7.87 cm and 11.62 cm, respectively. Mean postoperative length and girth were 11.62 cm and 14.07 cm. The gain in length (47.6%) and girth (21%) were statistically significant (P < 0.005). All patients and partners were satisfied with the results following surgery except one who suffered graft loss. Implantation of a penile prosthesis may improve penile rigidity, yet may confound couple's satisfaction with penile size to variable degrees. Sex education may alleviate those concerns. In refractory cases, penile augmentation may enhance phallic size and increase patient/partner satisfaction.

  7. Immediately Loaded Intraorally Welded Complete-Arch Maxillary Provisional Prosthesis.

    Science.gov (United States)

    Albiero, Alberto Maria; Benato, Renato; Fincato, Andrea

    2015-01-01

    Guided implant surgery is not completely accurate when using computer-designed stereolithographic surgical guides. Complications are frequently reported when combining computer-guided flapless surgery with an immediately loaded prefabricated prosthesis. Achieving passive fit of a prefabricated prosthesis on the inserted implants the same day of the surgery can be difficult. The aim of this report is to show a new treatment approach to immediately loaded implants inserted with computer-guided surgery using an intraoral welded full-arch provisional prosthesis.

  8. Developmental spinal canal stenosis and somatotype.

    OpenAIRE

    Nightingale, S.

    1989-01-01

    The hypothesis that somatotype and cervical spine developmental canal stenosis may be associated has been investigated by anthropometry and measurement of lateral projection cervical spine radiographs. A significant association of canal size with somatotype has been found such that those with developmentally narrow canals are more likely to have relatively shorter long-bones, particularly in the upper arm, and longer trunks.

  9. Fabrication of a Cranial Prosthesis Combined with an Ocular Prosthesis Using Rapid Prototyping: A Case Report

    Directory of Open Access Journals (Sweden)

    Gayatri Shankaran

    2016-08-01

    Full Text Available Rapid prototyping (RP is a technique of manufacturing parts by the additive layer manufacturing technology; where, a three-dimensional (3D model created in a computer aided design (CAD system is sectioned into 2D profiles, which are further constructed by RP layer by layer. Its use is not limited to industrial or engineering fields and has extended to the medical field for the manufacturing of custom implants and prostheses, the study of anatomy and surgical planning. Nowadays, dentists are more frequently encountered with the individuals affected with craniofacial defects due to trauma. In such cases, the cranio-maxillofacial rehabilitation is a real challenge to bring the patients back to society and promote their well-being. The conventional impression technique for facial prosthesis fabrication has the disadvantage of deforming the soft tissue and causing discomfort for the patient. Herein, we describe the fabrication of a cranial prosthesis combined with an ocular prosthesis with RP and stereolithography.

  10. Real-time control of an interactive impulsive virtual prosthesis.

    Science.gov (United States)

    Bunderson, Nathan E

    2014-03-01

    An interactive virtual dynamic environment for testing control strategies for neural machine interfacing with artificial limbs offers several advantages. The virtual environment is low-cost, easily configured, and offers a wealth of data for post-hoc analysis compared with real physical prostheses and robots. For use with prosthetics and research involving amputee subjects it allows the valuable time with the subject to be spent in experiments rather than fixing hardware issues. The usefulness of the virtual environment increases as the realism of the environment increases. Most tasks performed with limbs require interactions with objects in the environment. To simulate these tasks the dynamics of frictional contact, in addition to inertial limb dynamics must be modeled. Here, subjects demonstrate real-time control of an eight degree-of-freedom virtual prosthesis while performing an interactive box-and-blocks task. With practice, four nonamputee subjects and one shoulder disarticulation subject were able to successfully transfer blocks in the virtual environment at an average rate of just under two blocks per minute. The virtual environment is configurable in terms of the virtual arm design, control strategy, and task.

  11. Erie Canal Technology: Stump Pullers

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2013-01-01

    Many years ago I saw a picture of a huge set of wheels that was used to remove tree stumps during the construction of the Erie Canal (1817-1825) and was intrigued by its use of leverage, mechanical advantage, and torque. Figure 1 is a scale model of the device based on my memory of the (lost) picture and published accounts.

  12. Contemporary root canal filling strategies

    NARCIS (Netherlands)

    Moinzadeh, A.T.

    2016-01-01

    Currently, clinicians can choose from a wide range of root canal filling materials and techniques, some of which have been evaluated in this thesis. Methacrylate resin-based sealers suffer from polymerization shrinkage stresses. This limitation may partly be overcome by a two-step cementation

  13. Retention of Root Canal Posts

    DEFF Research Database (Denmark)

    Sahafi, A; Benetti, Ana Raquel; Flury, S

    2015-01-01

    ] and a self-etch adhesive resin cement [Panavia F2.0]) were used. After removal of the crowns of 360 extracted premolars, canines, or incisors, the root canals were prepared with a parallel-sided drill system to three different final diameters. Half the posts did not receive any pretreatment. The other half...

  14. A Method to Analyze Dynamics Properties of Transfemoral Prosthesis

    Directory of Open Access Journals (Sweden)

    Van Tuan Le

    2016-01-01

    Full Text Available Abstract.The methodto compute gait cycle forces and moments acting on the hip and knee joints of a lower limb with a trans-femoral prosthesis were investigated. A 3D model of the lower limb with prosthesis was created using CAD software and based on MRI data and real size dimension. The transfemoral prosthesis was modelled as a coupled of links with two revolution joints at hip and knee joint. This coupled link was connected to a bar with translation joint to description the distance walked of people in gait cycle. All parts of the prosthesis were measured and a full-size 3D model was created.The kinematics parameters of a lower limb with a prosthesis were determined from motion-captured system data. The reaction force was measured with a force sensor in the footplate. The 3D model of the prosthesis was exported to MatlabSimmechanics. The input data which are kinematic parameters were applied to calculate the forces and moments acting on the joints. The results of this study present a method to analyse the dynamic properties of transfemoral prosthesis including speed of the gait. It could be used to calculate the load transferred from the socket to the residual limb. They could also be used to design the structure of a prosthesis and optimize the dynamic characteristics of such a prosthesis.

  15. [Prosthesis use in pediatric patients with fibular hipoplasia].

    Science.gov (United States)

    Aparicio, Omar Carlos González; García, Felipe Haces; Leonori, Romáin Capdevila; García, Víctor Rosas

    2007-01-01

    To assess the prosthesis adaptability at use of pedestal and transtibial prosthesis, recognize the average average age of amputation surgery, and the complications of the amputation in patients with fibular hemimelia. 47 patients were evaluated, initially to adjust pedestal prosthesis and when this was not tolerated, we realize amputation and adaptation of transtibial prosthesis, we valued the average age of amputation surgery, the associate complications and the prosthesis adaptability we use the K system for functional ambulation. Of the 12 patients to actually use pedestal prosthesis 9 (75%) had a K.2 level, 3 (25%) had a K-3 level, of the 35 patients to use transtibial prosthesis 1 (3%) had a K-2 level, 19 (54%) K-3 level, and 15 (43%) in the K-4 level. The average age to amputation surgery was 3.9 years old, one case had a complication. The early prosthesis adaptability provides advantages in the functional ambulation, as demonstrated on the results. The goal of the transtibial amputation is to facilitate the prosthesis adaptability, is due to take advantage of the best functional adaptation the child in the first years of life, circumstance that improves the integral rehabilitation of the patient.

  16. Improved comfort and function of arm prosthesis after implantation of a Humerus-T-Prosthesis in trans-humeral amputees.

    Science.gov (United States)

    Witsø, Eivind; Kristensen, Tomm; Benum, Pål; Sivertsen, Svein; Persen, Leif; Funderud, Are; Magne, Tordis; Aursand, Hans Petter; Aamodt, Arild

    2006-12-01

    The use of arm prosthesis in trans-humeral amputees is limited; due to the cone form of the amputation stump. A Humerus-T-Prosthesis was implanted in three patients to create artificial humerus condyles. Two of the patients were successfully rehabilitated with the application of a new type trans-humeral arm prosthesis. This arm prosthesis had a socket which is suspended and stabilized by the humerus and implant only. Traction and rotational stability were secured by adjustable pressure adaptation around the artificial condyles. The third patient developed a pressure wound over the lateral part of the artificial condyle that later healed. He also was subject to a new trauma with a fracture of the ipsilateral scapula and until now has had limited the use of his new arm prosthesis. It was concluded that this new concept for prosthesis fitting of trans-humeral amputees looks promising, but alternative designs of the implant should be tested.

  17. Mandibular Second Premolar with Four Canals

    Directory of Open Access Journals (Sweden)

    Javad Ghiasi

    2015-09-01

    Full Text Available A mandibular second premolar with four canals is an interesting example of anatomic variations. This report describes a case of a mandibular second premolar with three roots and four canals (one mesiobuccal, two distobuccal and one lingual. The canals were prepared using K-files and irrigated with NaOCl (5.25% and normal saline as the final irrigant. The canals were filled laterally with gutta percha and AH26 sealer (De Trey, Dentsply, Switzerland. This case shows a rare anatomic configuration and points out the importance of looking for additional canals.

  18. Stretching morphogenesis of the roof plate and formation of the central canal.

    Directory of Open Access Journals (Sweden)

    Igor Kondrychyn

    Full Text Available BACKGROUND: Neurulation is driven by apical constriction of actomyosin cytoskeleton resulting in conversion of the primitive lumen into the central canal in a mechanism driven by F-actin constriction, cell overcrowding and buildup of axonal tracts. The roof plate of the neural tube acts as the dorsal morphogenetic center and boundary preventing midline crossing by neural cells and axons. METHODOLOGY/PRINCIPAL FINDINGS: The roof plate zebrafish transgenics expressing cytosolic GFP were used to study and describe development of this structure in vivo for a first time ever. The conversion of the primitive lumen into the central canal causes significant morphogenetic changes of neuroepithelial cells in the dorsal neural tube. We demonstrated that the roof plate cells stretch along the D-V axis in parallel with conversion of the primitive lumen into central canal and its ventral displacement. Importantly, the stretching of the roof plate is well-coordinated along the whole spinal cord and the roof plate cells extend 3× in length to cover 2/3 of the neural tube diameter. This process involves the visco-elastic extension of the roof place cytoskeleton and depends on activity of Zic6 and the Rho-associated kinase (Rock. In contrast, stretching of the floor plate is much less extensive. CONCLUSIONS/SIGNIFICANCE: The extension of the roof plate requires its attachment to the apical complex of proteins at the surface of the central canal, which depends on activity of Zic6 and Rock. The D-V extension of the roof plate may change a range and distribution of morphogens it produces. The resistance of the roof plate cytoskeleton attenuates ventral displacement of the central canal in illustration of the novel mechanical role of the roof plate during development of the body axis.

  19. 75 FR 39632 - Regulated Navigation Area; Gulf Intracoastal Waterway, Inner Harbor Navigation Canal, Harvey...

    Science.gov (United States)

    2010-07-12

    ..., Inner Harbor Navigation Canal, Harvey Canal, Algiers Canal, New Orleans, LA; Correction ACTION: Interim... Navigation Canal, Harvey Canal, Algiers Canal, New Orleans, LA into the Code of Federal Regulations. That...

  20. Maturation of canal-related brainstem neurons in the detection of horizontal angular acceleration in rats.

    Science.gov (United States)

    Lai, Chun-Hong; Yiu, Christina N S; Lai, Suk-King; Ng, Ka-Pak; Yung, Ken K L; Shum, Daisy K Y; Chan, Ying-Shing

    2010-05-15

    We examined the functional maturation of canal-related brainstem neurons in Sprague-Dawley rats at postnatal day (P)1 to adult. Conscious animals were subjected to cycles of angular acceleration and deceleration so as to selectively activate hair cells of the horizontal semicircular canals. Brainstem neurons were monitored for c-fos expression by immuno-hybridization histochemistry as an indicator of neuronal activation. Fos-immunoreactive canal-related neurons were identifiable from P4 onwards in the vestibular nucleus and downstream vestibular relay stations, prepositus hypoglossal nucleus, and inferior olive. In the vestibular nucleus and prepositus hypoglossal nucleus, the number of canal-related neurons increased progressively with age, reaching the adult level by P21. Those in the inferior olive increased in number from P4 to P14 but decreased significantly afterwards until adulthood. The topography was not clear in the vestibular nucleus and prepositus hypoglossal nucleus. Canal-related neurons in P4-7 rats were spread throughout the rostrocaudal length of each subnucleus but clusters of canal-related neurons tended to form within specific subnuclei by P21. These were concentrated in the caudal halves of medial and spinal vestibular nuclei and the rostral parts of superior vestibular nucleus and prepositus hypoglossal nucleus. In the inferior olive, the topography was evident early in the course of development. Canal-related neurons were exclusively located in four subnuclei: dorsal medial cell column, dorsal cap, subnucleus A, and subnucleus C, but not in other subnuclei. Taken together, our data revealed the developmental profile of neuronal subpopulations within the horizontal canal system, thus providing an internal neural representation for postnatal coding of horizontal head rotations in spatial perception. (c) 2009 Wiley-Liss, Inc.

  1. [Total prosthesis arthroplasty in femur head necrosis].

    Science.gov (United States)

    Elke, R; Morscher, E

    1990-08-01

    In young patients with advanced necrosis of the femoral head, the short- and medium-term results of total prosthesis arthroplasty are the most satisfactory. However, the prospect of aseptic loosening hangs over such arthroplasties like Damocles' sword. Reports from the literature suggest that, in addition to the age of the patient, there is also an endogenous factor that can be responsible not only for the etiology and pathogenesis of the necrosis, but also for the early loosening of the prosthesis. We have followed up 54 patients (73 hip joints) who had total hip replacement as a result of necrosis of the femoral head between 1976 and 1988. Altogether, 3 acetabular and 5 femoral shafts had to be replaced (7 patients). This corresponds to a loosening rate of 10% after an average of 4.9 years. Hence, the prosthesis changing rate is lower than that reported by other authors, but is still higher than in patients with coxarthrosis. Only 2 of 52 cemented shaft prostheses had to be replaced; the average age of these patients was 61.4 years. Of the 21 cement-free shaft implantations, 3 had to be replaced, the average age of these patients being 42.9 years. The fact that the average age of the latter patients was lower may be the reason for the revision rate not being significantly higher for the non-cemented shafts. In view of the fact that necrosis of the femoral head can rapidly result in the patient becoming an invalid if it is allowed to follow its natural course, hip joint prostheses should also be offered to younger patients.

  2. Energy exchange between knee and ankle in a transfemoral prosthesis

    NARCIS (Netherlands)

    Koopman, Hubertus F.J.M.; Behrens, Sebastiaan Maria; Hekman, Edsko E.G.; Ünal, Ramazan

    2013-01-01

    In order to make an energy efficient transfemoral prosthesis, there should be energy exchange between knee and ankle of the prosthesis. A concept containing various spring elements is designed and tested for a single subject. It is shown that the concept of energy exchange can be realized; in this

  3. 21 CFR 872.3970 - Interarticular disc prosthesis (interpositional implant).

    Science.gov (United States)

    2010-04-01

    ... implant). 872.3970 Section 872.3970 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND... disc prosthesis (interpositional implant). (a) Identification. An interarticular disc prosthesis (interpositional implant) is a device that is intended to be an interface between the natural articulating surface...

  4. Fabrication of custom made ocular prosthesis with three different ...

    African Journals Online (AJOL)

    Loss of eye has a bad effect on the psychology of the patient. Eye prosthesis is fabricated to regain the patient's confidence by meticulous replacement of the missing eye. Immediate fitting of an anophthalmic socket with an artificial eye may not always be possible, and a delayed prosthesis delivery may result in settling and ...

  5. Three-piece Inflatable Penile Prosthesis: Surgical Techniques and ...

    African Journals Online (AJOL)

    implantation of the three-piece inflatable penile prosthesis and point out the major surgical pitfalls accompanying this procedure and their specific management. The psychological outcome of penile prosthesis surgery is also discussed. Different surgical approaches are available when performing the procedure. A number ...

  6. Three-piece Inflatable Penile Prosthesis: Surgical Techniques and ...

    African Journals Online (AJOL)

    Penile prosthesis surgery plays a vital role in the treatment of erectile dysfunction (ED). As far as outcome is concerned, it is one of the most rewarding procedures for both patients and surgeons. We describe our surgical technique for implantation of the three-piece inflatable penile prosthesis and point out the major surgical ...

  7. [Disappointing long-term experiences of patients with penile prosthesis

    NARCIS (Netherlands)

    Meuleman, E.J.H.; Deunk, L.; Schreuders-Bais, C.; Rabsztyn, P.

    2001-01-01

    OBJECTIVE: To describe the long-term experience with the implantation of a penile prosthesis as a last resort treatment for erectile dysfunction. DESIGN: Retrospective and descriptive. METHOD: During the period 1986-1996, 124 men received a penile prosthesis. Basic information was obtained from

  8. Risk factors associated with accidental ingestion of dental prosthesis ...

    African Journals Online (AJOL)

    Results: During the study period, eight patents were see, seven male and one female. Their ages ranged from 35 to 85 years with an average of 61.13 years. All the dental prosthesis retrieved from patients in this study were unsecured. Most of the patients with impacted dental prosthesis did not have the habit of removing ...

  9. Treatment of femoral neck fracture by Moore Prosthesis in Cotonou ...

    African Journals Online (AJOL)

    Treatment of femoral neck fracture by Moore Prosthesis in Cotonou. AHM Akue, M Lawson, S Madougou, R Zannou, J Padonou. Abstract. Keywords: Benin; hip; Moore prosthesis; results. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  10. Design and wear testing of a temporomandibular joint prosthesis articulation

    NARCIS (Netherlands)

    van Loon, JP; Verkerke, GJ; de Vries, MP; de Bont, LGM

    As part of the development of a total temporomandibular joint prosthesis, a prosthesis articulation was designed. The articulation consists of a spherical head (ball) of the mandibular part, rotating against an enveloping ultra-high-molecular-weight polyethylene (UHMWPE) disc with a flat cranial

  11. 21 CFR 878.3750 - External prosthesis adhesive.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false External prosthesis adhesive. 878.3750 Section 878.3750 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... adhesive. (a) Identification. An external prosthesis adhesive is a silicone-type adhesive intended to be...

  12. [Tomography of the pterygoid canals].

    Science.gov (United States)

    Riazantsev, S V; Kalenov, V E; Russkikh, N A

    1990-01-01

    This paper presents an X-ray scheme for calculating the depth of pterygoid canals required for accurate tomography. The scheme includes three lines: line A corresponds to the physiological horizontal line, line B is drawn, normally to line A through the tip of the nose, and line C is the perpendicular from line B to the upper third of the posterior wall of the pterygopalatine fossa. The length of line B plus 1 cm (thickness of external nose soft tissues) is the value to be determined. Twenty-six patients underwent X-ray examinations by an EDK-750B unit (70 kV, 150 mA, 1.65 s). In all cases 1-3 images were sufficient to obtain good visualization of the pterygoid canals.

  13. Scalloping at the lumbosacral canal

    Energy Technology Data Exchange (ETDEWEB)

    Reinhardt, R.

    1987-07-01

    Scalloping is an indentation of the dorsal side of the vertebral body (anterior wall of the lumbosacral or sacral canal) which typically involves several adjacent lumbal vertebral body segments and the anterior wall of the canalis sacralis. Occurrence without underlying disease is rare; it occurs most frequently with chondrodystrophy, neurofibromatosis, Morquio's syndrome, Hurler's syndrome, acromegaly, Ehlers-Danlos syndrome, Marfan's syndrome, cysts, tumors and in peridural lipomas.

  14. Endometriosis en el canal inguinal

    OpenAIRE

    Quirós, José Luis; Corrales, Daniela

    2013-01-01

    Resumen: Endometriosis se define como la presencia de tejido glandular y estromal endometrial fuera de la cavidad uterina y este tejido ectópico es dependiente de la estimulación estrogénica. Usualmente se presenta en ovarios, fondos de saco, ligamento ancho, ligamento uterosacro, útero, trompas de Falopio, tracto gastrointestinal y geniturinario. Sin embargo, puede presentarse en otras localizaciones, como en el canal inguinal. Prevalece en 10% de las mujeres en edad reproductiva. Existen mu...

  15. Penile Corporeal Reconstruction during Difficult Placement of a Penile Prosthesis

    Directory of Open Access Journals (Sweden)

    Viet Q. Tran

    2008-01-01

    Full Text Available For some patients with impotence and concomitant severe tunical/corporeal tissue fibrosis, insertion of a penile prosthesis is the only option to restore erectile function. Closing the tunica over an inflatable penile prosthesis in these patients can be challenging. We review our previous study which included 15 patients with severe corporeal or tunical fibrosis who underwent corporeal reconstruction with autologous rectus fascia to allow placement of an inflatable penile prosthesis. At a mean follow-up of 18 months (range 12 to 64, all patients had a prosthesis that was functioning properly without evidence of separation, herniation, or erosion of the graft. Sexual activity resumed at a mean time of 9 weeks (range 8 to 10. There were no adverse events related to the graft or its harvest. Use of rectus fascia graft for coverage of a tunical defect during a difficult penile prosthesis placement is surgically feasible, safe, and efficacious.

  16. Amputation and prosthesis implantation shape body and peripersonal space representations.

    Science.gov (United States)

    Canzoneri, Elisa; Marzolla, Marilena; Amoresano, Amedeo; Verni, Gennaro; Serino, Andrea

    2013-10-03

    Little is known about whether and how multimodal representations of the body (BRs) and of the space around the body (Peripersonal Space, PPS) adapt to amputation and prosthesis implantation. In order to investigate this issue, we tested BR in a group of upper limb amputees by means of a tactile distance perception task and PPS by means of an audio-tactile interaction task. Subjects performed the tasks with stimulation either on the healthy limb or the stump of the amputated limb, while wearing or not wearing their prosthesis. When patients performed the tasks on the amputated limb, without the prosthesis, the perception of arm length shrank, with a concurrent shift of PPS boundaries towards the stump. Conversely, wearing the prosthesis increased the perceived length of the stump and extended the PPS boundaries so as to include the prosthetic hand, such that the prosthesis partially replaced the missing limb.

  17. Microbiology of normal external auditory canal.

    Science.gov (United States)

    Stroman, D W; Roland, P S; Dohar, J; Burt, W

    2001-11-01

    To isolate and characterize bacteria and fungi from the healthy ear and to obtain susceptibility profiles on each bacterial isolate. Prospective. Specimens were collected from the external canals and cerumen of healthy subjects. Species-level identification was obtained by combining phenotypic and genotypic data. End-point minimal inhibitory concentration testing was performed using National Committee for Clinical Laboratory Standards recommended methods. One hundred sixty-four subjects were cultured. Seventeen canal and 16 cerumen specimens showed no growth. One hundred forty-eight cerumen specimens yielded 314 organisms, including 23 fungi. One hundred forty-seven canal specimens yielded 310 organisms, including 7 fungi. Of 291 bacteria isolated from cerumen, 99% were Gram-positive. Of 302 bacteria isolated from the canal, 96% were Gram-positive. Staphylococci were 63% of both the cerumen bacteria and the canal bacteria. Coryneforms represented 22% of the bacteria in cerumen and 19% in the canal. Turicellaotitidis was the primary coryneform isolated from both the canal and the cerumen. Streptococci-like bacteria were 10% from the cerumen, 7% from the canal. In both cerumen and canal, Alloiococcusotitis was more than 95% of the streptococci-like bacteria. Fifteen gram-negative organisms were isolated from the canal and cerumen, including four Pseudomonas aeruginosa strains. The percentages of Staphylococcus epidermidis isolates that had high-level resistance (> or =8 microg/mL) were as follows: to neomycin, 28% from cerumen and 11% from the canal; to oxacillin, 28% from cerumen and 25% from the canal; and to ofloxacin, 15% from cerumen and 19% from the canal. Turcellaotitidis and A. otitidis were present with a much higher frequency than previously described, lending evidence that they be considered normal otic flora. Corynebacterium auris, previously reported only in children, was isolated from normal adults.

  18. Difficult factors in Management of Impacted Dental Prosthesis in Esophagus

    Directory of Open Access Journals (Sweden)

    Efiaty A. Soepardi

    2005-03-01

    Full Text Available A dental prosthesis which ingested and impacted in esophagus, is an emergency case and life threatening, so require immediate esophagoscopy intervention for removing. The objective of this study is to assess some factors can caused dtfficulties in diagnosing and treating the ingested and impacted dental prosthesis in the esophagus and their complications. This retrospective study analyzed patient’s chart whose underwent esophagoscopy for removing the impacted dental prosthesis in Dr. Cipto Mangunkusumo General Hospital, Jakarta, Indonesia during a period between January 1997 and December 2003. Neck-chest X-ray and esophagoscopy were performed in all patients to identify the existence of the dental prosthesis as a diagnostic and treatment procedure. The length of time for removing the dental prosthesis was recorded and stated as a less difficult esophagoscopy when it takes time less than 60 minutes and as a difficult  esophagoscopy takes 60 minutes or longer. Some risk difficulties factors were statistically analyzed. There were 53 patients of ingested dental prosthesis in esophagus. Only 51 cases were analyzed According to the length of time for removing the dental prosthesis by esophagoscopy, 22 patients were recorded as less difficult cases and 29 patients as difficult cases. Two cases among the cases needed cervicotomy after unsuccessful esophagoscopy removal. The difficulties to diagnose an impacted dental prosthesis in the esophagus caused by unreliable clinical history, unclear signs and symptoms, unable to be detected by X-ray and was not found during esophagoscopy. The difficulties in treating due to mucosal laceration, edema, bleeding, failure of the first extraction and conformity with the size and shape, the wire outside the dental prosthesis and the length of time stayed in the esophagus. (Med J Indones 2005; 14: 33-6Keywords: ingested dental prosthesis, radioluscent foreign body, length of time of esophagoscopy

  19. Removable dental prosthesis as periodontal treatment method

    Directory of Open Access Journals (Sweden)

    Aprilia Adenan

    2007-11-01

    Full Text Available The objectives of prostheses are to restore mastication force, improve esthetics and maintain gingival health. The construction and function of prosthesis restoration are mutually interdependent with condition of periodontal tissues. A properly constructed prosthesis is an integral phase of complete treatment of periodontal disease in order to maintain periodontal tissues health. This paper reports case of a man aged 47 years who came to Dental Specialist Clinic in Oral and Dental Hospital Faculty of Dentistry Universitas Padjadjaran with chief complaint of mobility in almost all his teeth and they seems to look longer. The patient has no systemic disease and did not want his teeth to be extracted. Clinical and panoramic radiographic and laboratoris examinations has been done. During treatment, oclusal adjustment and splinting had been done on tooth 33,34,35 and tooth 44,43 also tooth 43,42 splinting with composite. The following treatment was the acrylic removable partial denture for upper jaw while mandible was fitted a frame denture which functioned as a semi permanent splint. One month post treatment, patien felt comfort and the denture was well functioning.

  20. [Prosthesis replacement in periprosthetic humeral fractures].

    Science.gov (United States)

    Jaeger, M; Maier, D; Izadpanah, K; Südkamp, N P

    2017-12-01

    Stabilization of the humerus with preservation or restoration of the shoulder function. Always in the presence of a loose prosthesis. It may become necessary in conditions of poor bone stock and if osteosynthesis is not possible. Noncompliant patients due to alcohol or drugs. Local infections. The loose implant is removed using an extended anterior deltopectoral approach. After exploration of the fracture and extended soft tissue release, the glenoidal components are implanted with visualization and protection of the axillary nerve. A long stemmed implant is typically needed on the humeral side. It is anchored in the distal fragment over a length of about 6 cm. Soft tissue tension is crucial, especially with reverse shoulder arthroplasty. Postoperatively, the affected limb is immobilized for 6 weeks on a 15° shoulder abduction pillow with active assisted movement therapy up to the horizontal plane. This is followed by gradual pain-adapted increases of movement, muscle coordination, and strength. In 17 patients with periprosthetic fractures of the humerus surgically treated in our institution, 4 underwent revision arthroplasty because of a loose prosthesis. No intra- or postoperative complications were observed. All fractures healed except one.

  1. Malfunctioned and Fractured Penile Prosthesis Caused by Cross Placement: Case Report

    Directory of Open Access Journals (Sweden)

    Nihat Karakoyunlu

    2015-05-01

    Full Text Available Penile prosthesis is a functional option for patients who have erectile dysfunction after failed medical and intracavernosal treatments. Malleable penile prosthesis is a good alternative. Penile prosthesis implantation is a surgical process. Seldomly complications occur. In this study we presented a 61 y old man who has malfunctioned and broken penile prosthesis due to cross implantation.

  2. Developmental spinal canal stenosis and somatotype.

    Science.gov (United States)

    Nightingale, S

    1989-01-01

    The hypothesis that somatotype and cervical spine developmental canal stenosis may be associated has been investigated by anthropometry and measurement of lateral projection cervical spine radiographs. A significant association of canal size with somatotype has been found such that those with developmentally narrow canals are more likely to have relatively shorter long-bones, particularly in the upper arm, and longer trunks. Images PMID:2769282

  3. Development of the anterior chordal canal.

    Science.gov (United States)

    Tóth, Miklós; Moser, Gerhard; Patonay, Lajos; Oláh, Imre

    2006-01-01

    Resent advances have led to the reexamination of the intraosseous pathway of the chorda tympani a few years ago and they stated that the nerve never enters the mandibular fossa and its exit the skull base in the sphenopetrosal fissure. In our report, 58 temporal bones were investigated after maceration and formalin fixation in order to understand the development of the anterior chordal canal. Our study revealed that the chorda tympani leaves the tympanic cavity through the tympanosquamosal fissure before formation of the anterior chordal canal of Huguier. This canal is situated parallel to and in front of the musculotubal canal and formed by the processus inferior tegminis tympani and the sphenoid bone between the second and fifth years of age. Prior to the age of 2, only the exit of the bony canal exists which is gradually followed by the appearance of a groove in the growing processus inferior tegminis tympani. The borders of the groove elevate and develop to upper and lower plates which lengthen with similar plates of the sphenoid bone, completing the anterior chordal canal by the fifth postnatal year. The entrance of the canal develops above the petrotympanic fissure and similar to the canal itself, it is also completely formed in the fifth year. In case of an incomplete development the anterior chordal canal remains partially opened laterally which might allow the head of the mandibula to effect the chorda tympani mechanically causing Costen's syndrome.

  4. Categorization of compensatory motions in transradial myoelectric prosthesis users.

    Science.gov (United States)

    Hussaini, Ali; Zinck, Arthur; Kyberd, Peter

    2017-06-01

    Prosthesis users perform various compensatory motions to accommodate for the loss of the hand and wrist as well as the reduced functionality of a prosthetic hand. Investigate different compensation strategies that are performed by prosthesis users. Comparative analysis. A total of 20 able-bodied subjects and 4 prosthesis users performed a set of bimanual activities. Movements of the trunk and head were recorded using a motion capture system and a digital video recorder. Clinical motion angles were calculated to assess the compensatory motions made by the prosthesis users. The video recording also assisted in visually identifying the compensations. Compensatory motions by the prosthesis users were evident in the tasks performed (slicing and stirring activities) as compared to the benchmark of able-bodied subjects. Compensations took the form of a measured increase in range of motion, an observed adoption of a new posture during task execution, and prepositioning of items in the workspace prior to initiating a given task. Compensatory motions were performed by prosthesis users during the selected tasks. These can be categorized into three different types of compensations. Clinical relevance Proper identification and classification of compensatory motions performed by prosthesis users into three distinct forms allows clinicians and researchers to accurately identify and quantify movement. It will assist in evaluating new prosthetic interventions by providing distinct terminology that is easily understood and can be shared between research institutions.

  5. Disassembly and Dislocation of a Bipolar Hip Prosthesis

    Directory of Open Access Journals (Sweden)

    Hsieh-Hsing Lee

    2008-01-01

    Full Text Available Dislocation of a hip prosthesis is a common complication. In usual cases of hip prosthesis dislocation, the prosthetic femoral head comes out from either the natural acetabular cavity in a bipolar hemiarthroplasty or the prosthetic acetabulum in a total hip arthroplasty. Only a few cases of bipolar hip prosthesis dislocation due to dissociation between the polyethylene and inner head of the prosthesis have been reported. We describe a rare case of disassembly of the inner head from the bipolar outer prosthesis in an osteoarthritic acetabulum. A 72-year-old woman had undergone bipolar hemiarthroplasty due to fracture of the left femoral neck about 10 years previously. Recently, she sustained an injury after falling from a chair, and examinations revealed an unusual disassembly−dislocation of the bipolar hip prosthesis. We classified this failure in our patient as a type II failure, representing extreme varus position of the outer head in the acetabulum, dislocation of the inner head from the outer head, and a detached locking ring around the stem neck. This mechanism of failure as shown in our patient rarely occurs in the bipolar prosthesis of the self-centering system. Osteoarthritic change of the acetabulum would place the outer head in the varus position, increasing wear on the beveled rim by impinging the femoral stem neck and causing dislodgment of the inner locking ring and consequent disassembly−dislocation of the inner head.

  6. Root canal treatment of mandibular second premolar with four root canals

    Directory of Open Access Journals (Sweden)

    Bander Al-Abdulwahhab

    2015-01-01

    Full Text Available Variation in the morphology of the root canal system of mandibular premolars has been demonstrated. This diverse morphology challenges for the clinician to clean, shape, and fill the entire root canal system. A case report of a mandibular second premolar with four root canals separated at the apical third and underwent endodontic treatment is presented.

  7. 5 CFR 315.601 - Appointment of former employees of the Canal Zone Merit System or Panama Canal Employment System.

    Science.gov (United States)

    2010-01-01

    ... Canal Zone Merit System or Panama Canal Employment System. 315.601 Section 315.601 Administrative... employees of the Canal Zone Merit System or Panama Canal Employment System. (a) Agency authority. This... Zone Merit System, which was in effect before March 31, 1982, or under the Panama Canal Employment...

  8. Magnetic resonance imaging evaluation after implantation of a titanium cervical disc prosthesis: a comparison of 1.5 and 3 Tesla magnet strength.

    Science.gov (United States)

    Sundseth, Jarle; Jacobsen, Eva A; Kolstad, Frode; Nygaard, Oystein P; Zwart, John A; Hol, Per K

    2013-10-01

    Cervical disc prostheses induce significant amount of artifact in magnetic resonance imaging which may complicate radiologic follow-up after surgery. The purpose of this study was to investigate as to what extent the artifact, induced by the frequently used Discover(®) cervical disc prosthesis, impedes interpretation of the MR images at operated and adjacent levels in 1.5 and 3 Tesla MR. Ten subsequent patients were investigated in both 1.5 and 3 Tesla MR with standard image sequences one year following anterior cervical discectomy with arthroplasty. Two neuroradiologists evaluated the images by consensus. Emphasis was made on signal changes in medulla at all levels and visualization of root canals at operated and adjacent levels. A "blur artifact ratio" was calculated and defined as the height of the artifact on T1 sagittal images related to the operated level. The artifacts induced in 1.5 and 3 Tesla MR were of entirely different character and evaluation of the spinal cord at operated level was impossible in both magnets. Artifacts also made the root canals difficult to assess at operated level and more pronounced in the 3 Tesla MR. At the adjacent levels however, the spinal cord and root canals were completely visualized in all patients. The "blur artifact" induced at operated level was also more pronounced in the 3 Tesla MR. The artifact induced by the Discover(®) titanium disc prosthesis in both 1.5 and 3 Tesla MR, makes interpretation of the spinal cord impossible and visualization of the root canals difficult at operated level. Adjusting the MR sequences to produce the least amount of artifact is important.

  9. A new approach towards hip-prosthesis design.

    Science.gov (United States)

    Huggler, A H; Jacob, H A

    1980-01-01

    A new femoral prosthesis with a stemless design, different from conventional types, has been conceived in an effort to preserve the physiological stress distribution in magnitude and direction within the living bone as far as possible. The most important feature is that the hip joint forces are transmitted directly to the cortical bone of the resected femoral neck by means of a thrust plate, which maintains the physiological stress an the proximal end of the femur. The prosthesis, the instruments required for its implantation and the surgical technique are described in detail. Up to now, 3 patients have received this new prosthesis.

  10. The bionic eye (electronic visual prosthesis): a review.

    Science.gov (United States)

    Suaning, G J; Lovell, N H; Schindhelm, K; Coroneo, M T

    1998-08-01

    The concept of a visual prosthesis for the blind or partially sighted is not a new one. Indeed, for more than three decades this technology based treatment for blindness has appeared imminent. Despite the concerted efforts of numerous physicians, scientists and engineers, the successful application of a useful visual prosthesis remains elusive. The present review will endeavour to describe past efforts, investigate the present state of the art and indicate the obstacles that must be overcome in order to bring an electronic visual prosthesis to fruition.

  11. A modified technique for retention of orbital prosthesis

    Directory of Open Access Journals (Sweden)

    Sameera R Shaikh

    2011-01-01

    Full Text Available An orbital defect (congenital or acquired causes severe facial asymmetry and disfigurement, which results in psychological and social disturbances to the patient. It becomes a challenging task for a maxillofacial prosthodontist to fabricate a prosthesis that replicates the healthy side of the face. Success of the prosthesis depends primarily on satisfactory retention of the same. This clinical report illustrates rehabilitation of a patient with an orbital defect by fabricating a hollow orbital prosthesis, utilizing anatomical undercuts for retention using an acrylic resin template relined by a resilient denture liner.

  12. Canalizing Kauffman Networks: Nonergodicity and Its Effect on Their Critical Behavior

    OpenAIRE

    Moreira, André Auto; Nunes Amaral, Luís A.

    2005-01-01

    Boolean networks have been used to study numerous phenomena, including gene regulation, neural networks, social interactions, and biological evolution. Here, we propose a general method for determining the critical behavior of Boolean systems built from arbitrary ensembles of Boolean functions. In particular, we solve the critical condition for systems of units operating according to canalizing functions and present strong numerical evidence that our approach correctly predicts the phase tran...

  13. Canalizing Kauffman networks: non-ergodicity and its effect on their critical behavior

    OpenAIRE

    Moreira, Andre A.; Amaral, Luis A. N.

    2005-01-01

    Boolean Networks have been used to study numerous phenomena, including gene regulation, neural networks, social interactions, and biological evolution. Here, we propose a general method for determining the critical behavior of Boolean systems built from arbitrary ensembles of Boolean functions. In particular, we solve the critical condition for systems of units operating according to canalizing functions and present strong numerical evidence that our approach correctly predicts the phase tran...

  14. Natural tooth as an interim prosthesis.

    Science.gov (United States)

    Dhariwal, Neha S; Gokhale, Niraj S; Patel, Punit; Hugar, Shivayogi M

    2016-01-01

    A traumatic injury to primary maxillary anterior tooth is one of the common causes for problems with the succedaneous tooth leading to it noneruption. A missing anterior tooth can be psychologically and socially damaging to the patient. Despite a wide range of treatment options available, sometimes, it is inevitable to save the natural tooth. This paper describes the immediate replacement of a right central incisor using a fiber-composite resin splint with the natural tooth crown as a pontic following surgical extraction of the dilacerated impacted permanent maxillary central incisor. The abutment teeth can be conserved with minimal or no preparation, thus keeping the technique reversible and can be completed at chair side thereby avoiding laboratory costs. It can be used as an interim measure until a definitive prosthesis can be fabricated as the growth is still incomplete.

  15. [Nocardia farcinica infection of a vascular prosthesis].

    Science.gov (United States)

    Babilas, P; Scherer, K; Landthaler, M; Ehrenstein, B; Szeimies, R-M

    2007-04-01

    A 61-year-old woman presented with purple-red subcutaneous nodules on her right leg. She had experienced fever up to 40 degrees C for the past 10 days and felt generally weak over the last two months. Four months earlier, a vascular graft had been implanted in her right femoral artery. Based on the diagnosis of skin infection due to implantation of an infected prosthesis, she was hospitalized and treated with an antibiotic regime. During the initial antibiotic treatment, the symptoms deteriorated, and she developed joint, hepatic and CNS abscesses. Finally, a microbiologic culture with an extended incubation time revealed the diagnosis of an infection with the slowly growing bacterium Nocardia ssp. Hereupon the patient was treated purposefully with Meropenem over six months. This treatment resulted in complete recovery.

  16. Visual BOLD Response in Late Blind Subjects with Argus II Retinal Prosthesis.

    Directory of Open Access Journals (Sweden)

    E Castaldi

    2016-10-01

    Full Text Available Retinal prosthesis technologies require that the visual system downstream of the retinal circuitry be capable of transmitting and elaborating visual signals. We studied the capability of plastic remodeling in late blind subjects implanted with the Argus II Retinal Prosthesis with psychophysics and functional MRI (fMRI. After surgery, six out of seven retinitis pigmentosa (RP blind subjects were able to detect high-contrast stimuli using the prosthetic implant. However, direction discrimination to contrast modulated stimuli remained at chance level in all of them. No subject showed any improvement of contrast sensitivity in either eye when not using the Argus II. Before the implant, the Blood Oxygenation Level Dependent (BOLD activity in V1 and the lateral geniculate nucleus (LGN was very weak or absent. Surprisingly, after prolonged use of Argus II, BOLD responses to visual input were enhanced. This is, to our knowledge, the first study tracking the neural changes of visual areas in patients after retinal implant, revealing a capacity to respond to restored visual input even after years of deprivation.

  17. [Results after replacement of femoral neck prostheses - thrust plate prosthesis (TPP) versus ESKA cut prosthesis].

    Science.gov (United States)

    Ishaque, B A; Gils, J; Wienbeck, S; Donle, E; Basad, E; Stürz, H

    2009-01-01

    The aim of this study was to analyse and evaluate comparatively loosening mechanisms, failure frequency, surgical changing strategies and results after replacement of thrust plate prostheses (TPP) and ESKA Cut prostheses. Between 1993 und 2007, 465 TPP and in the years 2000 and 2001 82 ESKA Cut prostheses were performed and evaluated prospectively. Until 2007 46 change interventions of the TPP and 35 of the CUT prosthesis became necessary. All patients who received a stem revision procedure in our hospital were included within this study. Besides the evaluation of clinical results according to the criteria of the Harris Hip Score on the average at 15.6 months (+/- 14.4) postoperatively, radiological loosening processes and surgical difficulties were registered. Furthermore, an analysis of perioperative data was performed according to some criteria of the German Federal Office of Quality Assurance (BQS), such as duration of the surgery, intraoperative blood loss and complications. Statistical investigations for comparative analysis as well as survival analysis of both groups were calculated using SPSS for Windows 13.0. The mean age of the 46 patients who had to undergo revision surgery after TPP was 60.1 years, that of 35 patients in whom revision surgery was necessary after receiving an ESKA Cut femoral neck stem was 56.6 years. The survival rate analysis according to Kaplan-Meier at 13 years was 89.4 % (TPP) and 53.6 % at 66 months (ESKA Cut). In all cases the partial osteointegration of the tripod surface of the loosened Cut prosthesis complicated the explantation. It led on the one hand to a significant difference of the surgery duration and on the other hand to an increased frequency of fractures of the trochanteric region. The conversion of the TPP on standard type stems was usually free of problems. The HHS increased significantly to the averages of 86.6 (TPP) or, respectively, 91.69 (ESKA Cut) after revision. In comparison with the usually problem

  18. [Upper lateral incisor with 2 canals].

    Science.gov (United States)

    Fabra Campos, H

    1991-01-01

    Clinical case summary of the patient with an upper lateral incisor with two root canals. The suspicion that there might be an anatomic anomaly in the root that includes a complex root canal system was made when an advanced radicular groove was detected in the lingual surface or an excessively enlarged cingulum.

  19. 33 CFR 117.438 - Company Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Company Canal. 117.438 Section 117.438 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Louisiana § 117.438 Company Canal. (a) The draw of the...

  20. The enigma of the lateral canal.

    Science.gov (United States)

    Weine, F S

    1984-10-01

    It is difficult to summarize an article of this type, in which the author is certain that his case has been presented fairly, but is aware that other views that are contrary could be stated and endorsed by pertinent clinical cases. Bearing this fact in mind, I wish to reiterate the following: Lateral canals are demonstrated in endodontic cases with much less frequency than they exist. This variance rarely, if ever, causes an endodontic failure. Some demonstrated lateral canals may really be other conditions. Preoperative evaluation should include examination of radiographs for lateral, as well as periapical, lesions. Lateral canals may be demonstrated by a variety of filling techniques. Careful canal preparation may enhance the frequency of such demonstration. Cases with necrotic pulps probably yield more frequent demonstration than do cases with vital pulps. Lateral canals harboring inflamed and/or infected material may cause pain during endodontic treatment. They may simulate periodontal disease and may cause problems with treatment if present when a tooth is left open for drainage. Periodontal disease may cause pulp exposure via lateral canals located coronally. Improper use of post room may lead to lateral failure from breakdown of tissue in a lateral canal. The enigma of the lateral canal has been the object of description and discussion in many articles, but no one is truly certain of their exact significance in endodontic therapy for the long haul.

  1. Computed Tomography Findings of Mandibular Nutrient Canals.

    Science.gov (United States)

    Kawashima, Yusuke; Sekiya, Kotaro; Sasaki, Yusuke; Tsukioka, Tsuneyuki; Muramatsu, Teruaki; Kaneda, Takashi

    2015-08-01

    The purpose of this study was to assess computed tomography (CT) findings of mandibular nutrient canals using CT images. We retrospectively analyzed the mandibular CT images of 194 consecutive patients. For image analysis such as canal prevalence, location, number, size, shape, and the CT value of nutrient foramina were determined using CT axial images of 0.5 and 3 mm slice thickness. We revealed that the nutrient canals were seen 94.3% in the mandible, mostly seen in the anterior region. By location, nutrient canals were particularly seen between the central and lateral incisors. The mean number of nutrient canals was 2.7. The mean diameter of the nutrient foramen between the central and lateral incisors was 1.0 mm. In about 80% of the cases, foramina between the central and lateral incisors were ovoid. The mean CT value for the nutrient foramina between the central and lateral incisors was 411 HU. Mandibular nutrient canals were ovoid shape, and the mean CT value was 411 HU. By preoperative knowledge of the position and anatomy of the mandibular nutrient canals, complications such as injury to the nutrient canals can be avoided.

  2. EVALUTION OF EFFECTIVENESS OF BALANCE TRAINING IN CONVENTIONAL PROSTHESIS VERSUS ULTRAMODERN PROSTHESIS IN UNILATERAL TRANSTIBIAL AMPUTEE BY USING FLAMINGO BALANCE TEST

    OpenAIRE

    Suresh; Vinod Kumar; Bharath Raju; Raja; Ravish; Mandeep; Hari Krishna; Rajeeva

    2014-01-01

    AIM: To estimate the effectiveness of balance training on unilateral transtibal amputee with conventional prosthesis and ultramodern prosthesis. To compare the Effectiveness of balance training in conventional prosthesis versus ultramodern prosthesis in unilateral transtibial amputee by using Flamingo balance test. MATERIALS AND METHODS: After obtaining informed consent from the patients, we studied a total of 40 patients, aged between 30- 60 yrs, where they were randomly ...

  3. 21 CFR 888.3025 - Passive tendon prosthesis.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3025 Passive tendon prosthesis. (a... flexor tendon of the hand. The device is implanted for a period of 2 to 6 months to aid growth of a new...

  4. Towards a Completely Implantable, Light-Sensitive Intraocular Retinal Prosthesis

    National Research Council Canada - National Science Library

    Humayun, M

    2001-01-01

    An electronic retinal prosthesis is under development to treat retinitis pigmentosa and age-related macular degeneration, two presently incurable diseases of the outer retina that afflict millions world-wide...

  5. Characterization of an eye prosthesis using monopoly syrup.

    Science.gov (United States)

    Bankoti, Pinki; Singhal, M K; Nair, Chandana; Chandra, Praveen

    2016-01-01

    The eye is a vital organ and an important component of facial expression. Loss of an eye has a crippling effect on the psychology of the patient. Maxillofacial prostheses restore and replace stomatognathic and associated facial structures with artificial substitutes. The objectives of eye prosthesis is to improve the patient esthetics, restore and maintain the health of the remaining associated structures, consequently provide physical and mental well-being. The primary purpose of an ocular prosthesis is to maintain the volume of eye socket and create the illusion of a healthy eye and surrounding tissue. A custom ocular prosthesis is a good option when reconstruction is done by plastic surgery, and osseointegrated implants are either not possible or not desired. A case of a custom-made ocular acrylic prosthesis is presented with acceptable fit, good retention, and esthetics.

  6. Metabolics of stair ascent with a powered transfemoral prosthesis.

    Science.gov (United States)

    Ledoux, E D; Lawson, B E; Shultz, A H; Bartlett, H L; Goldfarb, M

    2015-01-01

    This paper evaluates the effectiveness of a powered knee and ankle prosthesis for stair ascent through a metabolic assessment comparing energy expenditure of a single transfemoral amputee subject while ascending stairs with the powered prosthesis relative to his passive daily use device, as well as comparing the kinematics and kinetics obtained with the passive prosthesis to healthy biomechanics. The subject wore a portable system that measured pulmonary gaseous exchange rates of oxygen and carbon dioxide while he ascended stairs with each of the prostheses in alternating tests. The results indicated that the amputee's energy expenditure decreased by 32 percent while climbing with the powered prosthesis as compared to his passive one, and the kinematics and kinetics achieved were representative of healthy biomechanics.

  7. Type III apical transportation of root canal

    Directory of Open Access Journals (Sweden)

    Shiv P Mantri

    2012-01-01

    Full Text Available Procedural accidents leading to complications such as canal transportation have been ascribed to inapt cleaning and shaping concepts. Canal transportation is an undesirable deviation from the natural canal path. Herewith a case of apical transportation of root canal resulting in endodontic retreatment failure and its management is presented. A healthy 21-year-old young male presented discomfort and swelling associated with painful endodontically retreated maxillary incisor. Radiograph revealed periradicular radiolucency involving underfilled 11 and overfilled 12. Insufficiently obturated 11 exhibited apical transportation of canal. This type III transportation was treated by periradicular surgery and repair using white mineral trioxide aggregate (MTA. Comfortable asymptomatic patient presented uneventful healing at third and fourth month recall visits. A decrease in the size of radiolucency in radiograph supported the clinical finding. In the present case, MTA is useful in repairing the transportation defect. The result of these procedures is predictable and successful.

  8. Updated regime equations for alluvial Egyptian canals

    Directory of Open Access Journals (Sweden)

    Fahmy Salah Abdelhaleem

    2016-03-01

    Full Text Available Real accuracy of several regime relationships for designing stable alluvial channels in Egypt was determined. Extensive field measurements had been carried out on 26 Egyptian stable canals, which cover various categories of irrigation canals starting from distributary, branch to carrier canals in Egypt. Analysis of 1484 velocity profiles for 371 cross sections was employed in order to formulate new regime equations characterizing Egyptian canals. The functional formulations to include the flow depth, cross section area, hydraulic radius and mean velocity were achieved. This research compared the deduced formulas from the measured data with the equations derived by other researchers for stable channel design. It was found that the derived formulas are reliable and could help in the design of Egyptian canals to convey a discharge ranging from 0.11 to 287.5 m3/s (0.0095–24.84 millions m3/day.

  9. Komposit Laminate Rami Epoksi Sebagai Bahan Alternatif Socket Prosthesis

    OpenAIRE

    Irawan, Agustinus P; Soemardi, Tresna P.; Widjajalaksmi K. Widjajalaksmi K.; Agus H.S. Reksoprodjo

    2009-01-01

    pure plant oil, biofuel, coconut oil, palm oil, jatropha oilSocket is the most important component in a prosthesis making. Performance criteria for prosthetic socket material include strength, durability, minimal weight, comfort, and minimal fabrication cost. This research attempts to analyze the strength of ramie fiber reinforced epoxy laminate composite as an alternative of socket prosthesis. The research based on ASTM D 3039/D 3039M for tensile strength and ASTM D 695 for compressive stren...

  10. Komposit Laminate Rami Epoksi Sebagai Bahan Alternatif Socket Prosthesis

    OpenAIRE

    Irawan, Agustinus P; Soemardi, Tresna P.; Widjajalaksmi K., Widjajalaksmi K; Agus H.S. Reksoprodjo

    2009-01-01

    Pure plant oil, biofuel, coconut oil, palm oil, jatropha oilSocket is the most important component in a prosthesis making. Performance criteria for prosthetic socket material include strength, durability, minimal weight, comfort, and minimal fabrication cost. This research attempts to analyze the strength of ramie fiber reinforced epoxy laminate composite as an alternative of socket prosthesis. The research based on ASTM D 3039/D 3039M for tensile strength and ASTM D 695 for compressive stre...

  11. Energy exchange between knee and ankle in a transfemoral prosthesis

    OpenAIRE

    Koopman, Hubertus F.J.M.; Behrens, Sebastiaan Maria; Hekman, Edsko E. G.; Ünal, Ramazan

    2013-01-01

    In order to make an energy efficient transfemoral prosthesis, there should be energy exchange between knee and ankle of the prosthesis. A concept containing various spring elements is designed and tested for a single subject. It is shown that the concept of energy exchange can be realized; in this specific situation up to 76 % of the mechanical energy is restored to support ankle plantar flexion during push-off.

  12. Treatment Using Functionally Fixed Prosthesis: A Case Report

    OpenAIRE

    Chandra, Sumi; Singh, Ajay; Gupta, Himanshu; Chandra, Chetan

    2013-01-01

    Most dental practitioners as well as their patients prefer to have fixed rather than removable prosthesis. However, there are many clinical situations that prohibit the use of the fixed treatment modality. These clinical cases can vary from, simply not having the proper number of healthy teeth and/or implants to, the esthetically challenging cases of high smile lines and severe loss of alveolar support. The approach of using a traditional removable prosthesis in these situations has always be...

  13. Split-Framework in Mandibular Implant-Supported Prosthesis

    OpenAIRE

    Danny Omar Mendoza Marin; Kássia de Carvalho Dias; André Gustavo Paleari; Ana Carolina Pero; João Neudenir Arioli Filho; Marco Antonio Compagnoni

    2015-01-01

    During oral rehabilitation of an edentulous patient with an implant-supported prosthesis, mandibular flexure must be considered an important biomechanical factor when planning the metal framework design, especially if implants are installed posterior to the interforaminal region. When an edentulous mandible is restored with a fixed implant-supported prosthesis connected by a fixed full-arch framework, mandibular flexure may cause needless stress in the overall restorative system and lead to s...

  14. Septic complication following porous hydroxyapatite cranioplasty: prosthesis retention management.

    Science.gov (United States)

    Iaccarino, Corrado; Mattogno, Pier P; Zanotti, Bruno; Bellocchi, Silvio; Verlicchi, Angela; Viaroli, Edoardo; Pastorello, Giulia; SGULò, Francesco; Ghadirpour, Reza; Servadei, Franco

    2016-05-13

    After failing of autologous cranioplasty or when the bone flap is unavailable, the alloplastic (heterologous) materials are the choice for cranial reconstruction. No agreement has been reported about the material with a significant lower risk of septic complications. This is due to extremely heterogeneous prognostic factors related not only to the material used but also to the surgical procedures and/or to the timing of the procedure. More attention should be focused on the material whose characteristic could enable a delay in bacterial colonization, where an antibiotic therapy could be effective, without need of prosthesis removal. Four cases of severe septic complication following cranioplasty with porous hydroxyapatite (HA) prosthesis are presented. Patients were conservatively treated, without heterologous bone flap removal. All of our patients presented reasons for delaying HA cranioplasty removal: Patients 1, 3 and 4 had an associated shunted hydrocephalus and the need for non- removing the prosthesis was related to the predictable recurrence of overshunting and/or sinking skin flap syndrome. In case 4 the revision surgery would have also damaged the microvascular flap with latissimus dorsi muscle used by plastic surgeon for skin reconstruction. In case 2 the patient refused revision surgery. In all cases systemic and/or radiological signs of infection were observed. In Case 2 the infective process surrounded completely the HA prosthesis, while it was located in the epidural region in Case 1 and 4. In Case 3 a surgical curettage of the infected wound was performed over the HA prosthesis. Following prosthesis retention management with antibiotic therapy, all patients revealed systemic and/or radiological signs of sepsis resolution at follow-up. The possibility to avoid a prosthesis removal with effective antibiotic treatment is mainly due to the combination of three factors: targeted antibiotic therapy, good anatomical area revascularization (resulting of an

  15. Kinematic Analysis of a Posterior-stabilized Knee Prosthesis

    Directory of Open Access Journals (Sweden)

    Zhi-Xin Zhao

    2015-01-01

    Full Text Available Background: The goal of total knee arthroplasty (TKA is to restore knee kinematics. Knee prosthesis design plays a very important role in successful restoration. Here, kinematics models of normal and prosthetic knees were created and validated using previously published data. Methods: Computed tomography and magnetic resonance imaging scans of a healthy, anticorrosive female cadaver were used to establish a model of the entire lower limbs, including the femur, tibia, patella, fibula, distal femur cartilage, and medial and lateral menisci, as well as the anterior cruciate, posterior cruciate, medial collateral, and lateral collateral ligaments. The data from the three-dimensional models of the normal knee joint and a posterior-stabilized (PS knee prosthesis were imported into finite element analysis software to create the final kinematic model of the TKA prosthesis, which was then validated by comparison with a previous study. The displacement of the medial/lateral femur and the internal rotation angle of the tibia were analyzed during 0-135° flexion. Results: Both the output data trends and the measured values derived from the normal knee′s kinematics model were very close to the results reported in a previous in vivo study, suggesting that this model can be used for further analyses. The PS knee prosthesis underwent an abnormal forward displacement compared with the normal knee and has insufficient, or insufficiently aggressive, "rollback" compared with the lateral femur of the normal knee. In addition, a certain degree of reverse rotation occurs during flexion of the PS knee prosthesis. Conclusions: There were still several differences between the kinematics of the PS knee prosthesis and a normal knee, suggesting room for improving the design of the PS knee prosthesis. The abnormal kinematics during early flexion shows that the design of the articular surface played a vital role in improving the kinematics of the PS knee prosthesis.

  16. A Simplified Technique for Fabrication of Orbital Prosthesis

    OpenAIRE

    Sharma, Neeraj; Thakral, G.K.; Mohapatra, Abhilash; Seth, Jyotsna; Vashisht, Pallavi

    2014-01-01

    Eye is a vital organ not only for vision, but also an important component of facial expression, and over-all personality of a person. Loss of eye, apart from leading to impaired vision has a crippling effect on the psychology of the patient. Prosthodontic rehabilitation of such cases includes fabrication of prosthesis by acrylic resin, silicone and implants. However, not all patients are willing to use implants for maxillofacial rehabilitation. Therefore, a custom made orbital prosthesis serv...

  17. Design and Optimization of Sinusoidal Formed Femur Prosthesis

    Directory of Open Access Journals (Sweden)

    Ahmet Zafer ŞENALP

    2015-01-01

    Full Text Available One of the major problems in hip replacement surgery is the hip replacement loosening. Hip replacement loosening occurs over time after the surgery and it is related to the discretization between the bone cement and prosthesis. The underlying factors of this situation are the stress occurring in the bone cement and the shape of the prosthesis. In this study, cortical and trabecular layers of the femur, bone cement and prosthesis were modeled. The models of bone cement and prosthesis were constructed parametrically and two different sinusoidal formed prostheses were developed unlike the former prostheses shapes. Analyses were conducted for these two different sinusoidal forms by using finite element method and optimization was conducted to obtain the appropriate prosthesis stem shape and bone cement thickness by using parametric modeling in finite element analyses. For finite element analyses and optimization, Ansys Workbench software was used and analyses were conducted for 316LS stainless steel material. Finally, the optimum prosthesis stem shape and bone cement thickness was determined by using the results of the analyses in the first stage

  18. Failed total carpometacarpal joint prosthesis of the thumb

    DEFF Research Database (Denmark)

    Hansen, Torben Bæk; Homilius, Morten

    2010-01-01

    Total joint prosthesis in carpometacarpal joint arthritis of the thumb often fails. Loosening of the implant is often treated by resection arthroplasty, and we reviewed 10 patients, mean age 54 years (range 47-63) who were treated by resection arthroplasty after a failed total joint prosthesis. T...... in eight of 10 patients, but the mean Disabilities of the arm, shoulder, and hand (DASH) scores, self-reported pinch-grip-related function, and pain were comparable with our earlier published results with the Elektra carpometacarpal total joint prosthesis.......Total joint prosthesis in carpometacarpal joint arthritis of the thumb often fails. Loosening of the implant is often treated by resection arthroplasty, and we reviewed 10 patients, mean age 54 years (range 47-63) who were treated by resection arthroplasty after a failed total joint prosthesis....... The male:female ratio was 1:4 and the mean duration of observation 32 months (range 6-52). In three patients the revised implant was a MOJE uncemented carpometacarpal joint prosthesis and in seven patients an Elektra uncemented one. At follow-up grip strength was reduced to less than 90% of the other hand...

  19. Association between dental prosthesis need, nutritional status and quality of life of elderly subjects

    DEFF Research Database (Denmark)

    Pillai, Rajath; Mathur, Vijay Prakash; Jain, Veena

    2015-01-01

    To determine the effect of prosthesis need on nutritional status and oral health-related quality of life (OHrQoL) in elderly and to check the disparity between prosthesis need and prosthesis want in the Indian elderly. METHODS: A total of 946 geriatric participants reporting to a geriatric medicine...... need (r = -0.460). Participants with some prosthesis need had significantly lower MNA and GOHAI scores as compared to those with no prosthesis need. Though prosthesis need was high (79.7 %), demand was low (39.3 %). CONCLUSION: Prosthesis need affects nutritional status and OHrQoL in elderly...... clinic were recruited in the study. Mini-nutritional assessment (MNA), geriatric oral health assessment (GOHAI) indices, prosthesis need according to WHO criteria, and prosthesis want was recorded along with age, gender, socioeconomic status and posterior occluding pair. RESULTS: Significant associations...

  20. Looking back at Love Canal

    Energy Technology Data Exchange (ETDEWEB)

    Deegan, J. Jr.

    1987-04-01

    The comprehensive environmental study which describes the results of a monitoring program conducted by EPA at Love Canal is evaluated by EPA's former study director. Attention is focused on the episode's history and the agency's study methods. The aim of the program was to constitute a study team, design a monitoring study, reprogram and reallocate the financial resources needed to conduct the study, and identify and employ contractors who would collect and analyze environmental samples. The agency was directed to ensure the quality of the data acquired from various environmental media and analyzed by numerous laboratories; to integrate, interpret, and report the data; and to assess, from an environmental perspective, the habitability of the area.

  1. Lateral meningocele with asymmetric canal stenosis: A case study

    Science.gov (United States)

    Mushtaq, Gohar; Hussain, Iqbal; Khan, Jalaluddin A.; Kamal, Mohammad A.

    2014-01-01

    Lateral meningocele is a very rare disorder of unknown aetiology typified by the presence of protrusions of the arachnoid and the dura matter extending laterally through inter- or intra-vertebral foramina. We report here the case of a 52-year old male with abnormality of spine when presented with low back pain. The patient did not appear to have any neurological disorder. A computerized tomography (CT) scan was acquired from T12 to mid sacrum with multiplanar reformations. The results showed the presence of a left sided paraspinal cystic lesion projecting from the left neural foramen and extending into the left psoas muscle suggesting a lateral meningocele. In addition, a broad based central and left paracentral disc protrusion was also observed resulting in asymmetric canal stenosis. The patient is on regular follow-up while undergoing palliative treatment. PMID:25561891

  2. Lateral meningocele with asymmetric canal stenosis: A case study.

    Science.gov (United States)

    Mushtaq, Gohar; Hussain, Iqbal; Khan, Jalaluddin A; Kamal, Mohammad A

    2015-01-01

    Lateral meningocele is a very rare disorder of unknown aetiology typified by the presence of protrusions of the arachnoid and the dura matter extending laterally through inter- or intra-vertebral foramina. We report here the case of a 52-year old male with abnormality of spine when presented with low back pain. The patient did not appear to have any neurological disorder. A computerized tomography (CT) scan was acquired from T12 to mid sacrum with multiplanar reformations. The results showed the presence of a left sided paraspinal cystic lesion projecting from the left neural foramen and extending into the left psoas muscle suggesting a lateral meningocele. In addition, a broad based central and left paracentral disc protrusion was also observed resulting in asymmetric canal stenosis. The patient is on regular follow-up while undergoing palliative treatment.

  3. How to bond to root canal dentin

    Science.gov (United States)

    Nica, Luminita; Todea, Carmen; Furtos, Gabriel; Baldea, Bogdan

    2014-01-01

    Bonding to root canal dentin may be difficult due to various factors: the structural characteristic of the root canal dentin, which is different from that of the coronal dentin; the presence of the organic tissue of the dental pulp inside the root canal, which has to be removed during the cleaning-shaping of the root canal system; the smear-layer resulted after mechanical instrumentation, which may interfere with the adhesion of the filling materials; the type of the irrigants used in the cleaning protocol; the type of the sealer and core material used in the obturation of the endodontic space; the type of the materials used for the restoration of the endodontically treated teeth. The influence of the cleaning protocol, of the root canal filling material, of the type of the adhesive system used in the restoration of the treated teeth and of the region of the root canal, on the adhesion of several filling and restorative materials to root canal dentin was evaluated in the push-out bond strength test on 1-mm thick slices of endodontically treated human teeth. The results showed that all these factors have a statistically significant influence on the push-out bond strength. Formation of resin tags between radicular dentin and the investigated materials was observed in some of the samples at SEM analysis.

  4. Panama Canal Watershed Experiment- Agua Salud Project

    Science.gov (United States)

    Stallard, Robert F.; Ogden, Fred L.; Elsenbeer, Helmut; Hall, Jefferson S.

    2010-01-01

    The Agua Salud Project utilizes the Panama Canal’s (Canal) central role in world commerce to focus global attention on the ecosystem services provided by tropical forests. The Canal was one of the great engineering projects in the world. Completed in 1914, after almost a decade of concerted effort, its 80 km length greatly shortened the voyage between the Atlantic and Pacific Oceans. An entire class of ships, the Panamax, has been constructed to maximize the amount of cargo that can be carried in a Canal passage. In today’s parlance, the Canal is a “green” operation, powered largely by water (Table 1). The locks, three pairs on each end with a net lift of 27 meters, are gravity fed. For each ton of cargo that is transferred from ocean to ocean, about 13 tons of water (m3) are used. Lake Gatún forms much of the waterway in the Canal transect. Hydroelectricity is generated at the Gatún dam, whenever there is surplus water, and at Madden Dam (completed in 1936) when water is transferred from Lake Alhajuela to Lake Gatún. The Canal watershed is the source of drinking water for Panama City and Colon City, at either end of the Canal, and numerous towns in between.

  5. Stretching cell morphogenesis during late neurulation and mild neural tube defects.

    Science.gov (United States)

    Korzh, Vladimir

    2014-08-01

    Neurulation is defined as a process of neural tube closure. Recent reports suggested that upon completion of this process the major factors of neurulation remain in force at least until the central canal of the neural tube is formed. Hence, an idea has been put forward to define the two periods of neurulation: early neurulation corresponds to the period of neural tube closure and late neurulation corresponds to the period of formation of the central canal. These ideas are discussed in a context of neural tube defects that may affect late neurulation and result in distention of the central canal. © 2014 The Author Development, Growth & Differentiation © 2014 Japanese Society of Developmental Biologists.

  6. Mandibular Canal Enlargement: Clinical and Radiological Characteristics

    Directory of Open Access Journals (Sweden)

    Chong Jun Ai

    2017-01-01

    Full Text Available Enlargement of the mandibular canal is a rare radiological finding. Clinically, it may or may not be associated with sensory deficits. We report four cases of widening of the mandibular canal observed with various methods of imaging with different clinical characteristics. We describe this unique radiological finding and elaborate the importance of quality assessment of the imaging that is vital for accurate diagnosis and treatment planning. Clinicians should be mindful when assessing the imaging whenever the size of the mandibular canal is implicated. The case ranged from a benign tumor to malignancy, radiological errors, and artifacts. A more superior imaging or treatment modality was necessary to ascertain the diagnosis.

  7. Prediction model for penile prosthesis implantation for erectile dysfunction management.

    Science.gov (United States)

    Segal, Robert L; Camper, Stephen B; Ma, Larry; Burnett, Arthur L

    2014-10-01

    Penile prosthesis surgery is indicated based on undesirability, contraindication or ineffectiveness of non-surgical options for erectile dysfunction. This definitive treatment is often delayed after initial diagnosis. Our objective was to develop a prediction tool based on a patient's clinical history to determine likelihood of ultimately receiving a penile prosthesis. This retrospective analysis used claims data from Commercial and Medicare supplemental databases. Inclusion criteria were 18 years of age with 1 year of continuous enrollment at the first diagnosis of erectile dysfunction. Patients' demographics, co-morbidities and erectile dysfunction therapy were derived based on enrollment, medical and prescription histories. The Cox proportional hazards model with stepwise selection was used to identify and quantify (using relative risk) factors associated with a future penile prosthesis implant. Co-morbidities and therapies present prior to the index erectile dysfunction diagnosis were analyzed as fixed covariates. Approximately 1% of the dataset's population (N = 310,303 Commercial, N = 74,315 Medicare, respectively) underwent penile prosthesis implantation during the study period (3928 patients in the overall population: 2405 patients [0.78%] in the Commercial and 1523 patients [2.05%] in the Medicare population). Factors with the greatest predictive strength of penile prosthesis implantation included prostate cancer diagnosis (relative risk: 3.93, 2.29; 95% CI, 3.57-4.34, 2.03-2.6), diabetes mellitus (2.31, 1.23; 2.12-2.52, 1.1-1.37) and previous treatment with first-line therapy (1.39, 1.33; 1.28-1.5, 1.2-1.47) (all P prosthesis. Calculating the likelihood of penile prosthesis implantation based on the weight of these factors may assist clinicians with the definition of a care plan and patient counseling. The precision of the model may be limited by factors beyond medical history information that possibly influence the decision to proceed to

  8. Automated estimation of hip prosthesis migration: a feasibility study

    Science.gov (United States)

    Vandemeulebroucke, Jef; Deklerck, Rudi; Temmermans, Frederik; Van Gompel, Gert; Buls, Nico; Scheerlinck, Thierry; de Mey, Johan

    2013-09-01

    A common complication associated with hip arthoplasty is prosthesis migration, and for most cemented components a migration greater than 0.85 mm within the first six months after surgery, are an indicator for prosthesis failure. Currently, prosthesis migration is evaluated using X-ray images, which can only reliably estimate migrations larger than 5 mm. We propose an automated method for estimating prosthesis migration more accurately, using CT images and image registration techniques. We report on the results obtained using an experimental set-up, in which a metal prosthesis can be translated and rotated with respect to a cadaver femur, over distances and angles applied using a combination of positioning stages. Images are first preprocessed to reduce artefacts. Bone and prosthesis are extracted using consecutive thresholding and morphological operations. Two registrations are performed, one aligning the bones and the other aligning the prostheses. The migration is estimated as the difference between the found transformations. We use a robust, multi-resolution, stochastic optimization approach, and compare the mean squared intensity differences (MS) to mutual information (MI). 30 high-resolution helical CT scans were acquired for prosthesis translations ranging from 0.05 mm to 4 mm, and rotations ranging from 0.3° to 3° . For the translations, the mean 3D registration error was found to be 0.22 mm for MS, and 0.15 mm for MI. For the rotations, the standard deviation of the estimation error was 0.18° for MS, and 0.08° for MI. The results show that the proposed approach is feasible and that clinically acceptable accuracies can be obtained. Clinical validation studies on patient images will now be undertaken.

  9. Zirconia in fixed prosthesis. A literature review

    Science.gov (United States)

    Román-Rodríguez, Juan L.; Ferreiroa, Alberto; Solá-Ruíz, María F.; Fons-Font, Antonio

    2014-01-01

    Statement of problem: Evidence is limited on the efficacy of zirconia-based fixed dental prostheses. Objective: To carry out a literature review of the behavior of zirconium oxide dental restorations. Material and Methods: This literature review searched the Pubmed, Scopus, Medline and Cochrane Library databases using key search words “zirconium oxide,” “zirconia,” “non-metal restorations,” “ceramic oxides,” “veneering ceramic,” “zirconia-based fixed dental prostheses”. Both in vivo and in vitro studies into zirconia-based prosthodontic restoration behavior were included. Results: Clinical studies have revealed a high rate of fracture for porcelain-veneered zirconia-based restorations that varies between 6% and 15% over a 3- to 5-year period, while for ceramo-metallic restorations the fracture rate ranges between 4 and 10% over ten years. These results provoke uncertainty as to the long-term prognosis for this material in the oral medium. The cause of veneering porcelain fractures is unknown but hypothetically they could be associated with bond failure between the veneer material and the zirconia sub-structure. Key words:Veneering ceramic, zirconia-based ceramic restoration, crown, zirconia, tooth-supported fixed prosthesis. PMID:24596638

  10. Golf hand prosthesis performance of transradial amputees.

    Science.gov (United States)

    Carey, Stephanie L; Wernke, Matthew M; Lura, Derek J; Kahle, Jason T; Dubey, Rajiv V; Highsmith, M Jason

    2015-06-01

    Typical upper limb prostheses may limit sports participation; therefore, specialized terminal devices are often needed. The purpose of this study was to evaluate the ability of transradial amputees to play golf using a specialized terminal device. Club head speed, X-factor, and elbow motion of two individuals with transradial amputations using an Eagle Golf terminal device were compared to a non-amputee during a golf swing. Measurements were collected pre/post training with various stances and grips. Both prosthesis users preferred a right-handed stance initially; however, after training, one preferred a left-handed stance. The amputees had slower club head speeds and a lower X-factor compared to the non-amputee golfer, but increased their individual elbow motion on the prosthetic side after training. Amputees enjoyed using the device, and it may provide kinematic benefits indicated by the increase in elbow flexion on the prosthetic side. The transradial amputees were able to swing a golf club with sufficient repetition, form, and velocity to play golf recreationally. Increased elbow flexion on the prosthetic side suggests a potential benefit from using the Eagle Golf terminal device. Participating in recreational sports can increase amputees' health and quality of life. © The International Society for Prosthetics and Orthotics 2014.

  11. Metabolic Prosthesis for Oxygenation of Ischemic Tissue

    Energy Technology Data Exchange (ETDEWEB)

    Greenbaum, Elias [ORNL

    2009-01-01

    This communication discloses new ideas and preliminary results on the development of a "metabolic prosthesis" for local oxygenation of ischemic tissue under physiological neutral conditions. We report for the first time the selective electrolysis of physiological saline by repetitively pulsed charge-limited electrolysis for the production of oxygen and suppression of free chlorine. For example, using 800 A amplitude current pulses and <200 sec pulse durations, we demonstrated prompt oxygen production and delayed chlorine production at the surface of a shiny 0.85 mm diameter spherical platinum electrode. The data, interpreted in terms of the ionic structure of the electric double layer, suggest a strategy for in situ production of metabolic oxygen via a new class of "smart" prosthetic implants for dealing with ischemic disease such as diabetic retinopathy. We also present data indicating that drift of the local pH of the oxygenated environment can be held constant using a feedback-controlled three electrode electrolysis system that chooses anode and cathode pair based on pH data provided by local microsensors. The work is discussed in the context of diabetic retinopathy since surgical techniques for multielectrode prosthetic implants aimed at retinal degenerative diseases have been developed.

  12. Scanning electron microscopy investigation of canal cleaning after canal preparation with nickel titanium files

    Directory of Open Access Journals (Sweden)

    Živković Slavoljub

    2010-01-01

    Full Text Available Introduction. Root canal preparation is the most important phase of endodontic procedure and it consists of adequate canal space cleaning and shaping. In recent years, rotary instruments and techniques have gained importance because of the great efficacy, speed and safety of the preparation procedure. Objective. The aim of this research was to investigate the influence of different NiTi files on the canal wall cleaning quality, residual dentine debris and smear layer. Methods. The research was conducted on extracted human teeth in vitro conditions. Teeth were divided in 7 main groups depending on the kind of instruments used for root canal preparation: ProTaper, GT, ProFile, K-3, FlexMaster, hand ProTaper and hand GT. Root canal preparation was accomplished by crown-down technique. Prepared samples were assessed on scanning electron microscopy JEOL, JSM-6460 LV. The evaluation of dentine debris was done with 500x magnification, and the evaluation of smear layer with 1,000 times magnification. Quantitive assessment of dentine debris and smear layer was done according to the criteria of Hulsmann. Results. The least amount of debris and smear layer has been found in canals shaped with ProFile instruments, and the largest amount in canals shaped with FlexMaster instruments. Canal cleaning efficacy of hand GT and ProTaper files has been similar to cleaning efficacy of rotary NiTi files. Statistic analysis has shown a significant difference in amount of dentine debris and smear layer on the canal walls between sample groups shaped with different instruments. Conclusion. Completely clean canals have not been found in any tested group of instruments. The largest amount of debris and smear layer has been found in the apical third of all canals. The design and the type of endodontic instruments influence the efficacy of the canal cleaning.

  13. Biomedical and psychosocial factors influencing transtibial prosthesis fit: a Delphi survey among health care professionals.

    Science.gov (United States)

    Baars, Erwin C; Schrier, Ernst; Geertzen, Jan H; Dijkstra, Pieter U

    2015-01-01

    We aimed to reach consensus among professionals caring for prosthesis users, on definitions of biomedical and psychosocial factors, to assess their influence on fit of transtibial prosthesis and to identify new factors. A three-round, internet-based, Delphi survey was conducted among experts recruited via the Dutch National Amputee and Prosthesis Work Group. The main outcome measure was consensus among care professionals on statements concerning new and presented biomechanical and psychosocial factors that influence transtibial prosthesis fit. Fifty-four experts participated in the survey, and consensus was reached on 67% (46/69) of all statements. Consensus on statements relevant for good prosthesis fit was reached in most of the statements concerning psychosocial factors and on statements concerning the biomedical factors "prosthesis support and suspension". Least consensus was reached on statements concerning the biomedical factor "skin problems and pain in the residual limb". Biomedical and psychosocial factors influence transtibial prosthesis fit. Consensus was reached among care professionals in a majority of the presented statements concerning these factors. Implications for Rehabilitation Prosthesis fit and comfort is suboptimal in many prosthesis users. Both biomedical and psychosocial factors influence fit. Biomedical and psychosocial factors should be checked during transtibial prosthesis prescription to achieve and maintain an optimal fit. Consensus on many factors influencing prosthesis fit is achieved among care professionals. Consensus was largest regarding prosthesis support and suspension and least regarding skin problems and pain in the residual limb. This consensus contributes to systematic assessment of prosthesis fit.

  14. Association between dental prosthesis need, nutritional status and quality of life of elderly subjects.

    Science.gov (United States)

    Pillai, Rajath Sasidharan; Mathur, Vijay Prakash; Jain, Veena; Shah, Naseem; Kalra, Sandeep; Kumar, Pravesh; Dey, A B

    2015-12-01

    To determine the effect of prosthesis need on nutritional status and oral health-related quality of life (OHrQoL) in elderly and to check the disparity between prosthesis need and prosthesis want in the Indian elderly. A total of 946 geriatric participants reporting to a geriatric medicine clinic were recruited in the study. Mini-nutritional assessment (MNA), geriatric oral health assessment (GOHAI) indices, prosthesis need according to WHO criteria, and prosthesis want was recorded along with age, gender, socioeconomic status and posterior occluding pair. Significant associations exist between prosthesis need and age (p = 0.005), MNA (p = 0.006) and GOHAI (p = 0.000). Prosthesis demand too was influenced by age (p = 0.004), posterior occluding pairs (p = 0.000), MNA (p = 0.012) and GOHAI (p = 0.000). GOHAI was negatively correlated with upper (r = -0.445) and lower prosthesis need (r = -0.460). Participants with some prosthesis need had significantly lower MNA and GOHAI scores as compared to those with no prosthesis need. Though prosthesis need was high (79.7 %), demand was low (39.3 %). Prosthesis need affects nutritional status and OHrQoL in elderly, and a wide gap exists between need and want of prosthesis.

  15. Gait assessment in patients with thrust plate prosthesis and intramedullary stemmed prosthesis implanted to each hip.

    Science.gov (United States)

    Angin, Salih; Karatosun, Vasfi; Unver, Bayram; Gunal, Izge

    2007-02-01

    There has not been any study regarding comparative gait analysis in patients with intramedullary stemmed prosthesis (ISP) and thrust plate prosthesis (TPP) implanted to each hip. Four patients (three females and one male) who had undergone operation due to coxarthrosis were selected. The mean age was 60.5 (37-78) years. TPP and ISP had been implanted to the left and right hip, respectively, in three patients, and one patient received TPP to the right and ISP to the left hip. Gait was analyzed with a BTS Elite System consisting six cameras and two Kistler force plates using Helen Hayes marker set to assess the gait parameters. The clinical outcome was also evaluated according to Harris hip score (HHS). The average HHS was 95.0 (82-100) points after a mean follow-up of 45.0 (30-50) months for TPP and 94.5 (80-100) points after a follow-up of 60.0 (14-122) months for ISP. Neither of the HHS scores and follow-up time nor gait parameters obtained from the TPP-implanted side were statistically different when compared to those of the ISP-implanted side. TPP and ISP as the implants with their own biomechanical specifications did not produce any remarkable difference in gait.

  16. Incidence of accessory canals in Japanese anterior maxillary teeth following root canal filling ex vivo.

    Science.gov (United States)

    Adorno, C G; Yoshioka, T; Suda, H

    2010-05-01

    To investigate the vertical and horizontal distribution and the incidence of accessory canals in Japanese maxillary anterior teeth following root filling. The study included maxillary teeth; 69 central incisors, 61 lateral incisors and 31 canines. After the canal systems had been dyed and root canal instrumentation had been carried out, all prepared canals were filled with gutta-percha without using sealer. Transparent specimens were then obtained and examined with a digital microscope for horizontal and vertical distributions of accessory canals. The incidence of teeth with accessory canals in the apical 3 mm was 46%, 29% and 38% for the maxillary central incisors, lateral incisors and canines, respectively. The horizontal distribution was mainly buccal for central incisors, palatal for lateral incisors and distal and palatal for canines. There was a significant difference (P < 0.05) between the apical 3 mm and the rest of the root (16%, 20% and 19% for the maxillary central incisors, lateral incisors and canines, respectively) in terms of the presence of accessory canals. A high percentage of accessory canals can be found in apical 3 mm of the root. The horizontal distribution of accessory canals differed amongst the tooth types studied.

  17. Canal and isthmus debridement efficacy using a sonic irrigation technique in a closed-canal system.

    Science.gov (United States)

    Johnson, Meenal; Sidow, Stephanie J; Looney, Stephen W; Lindsey, Kimberly; Niu, Li-na; Tay, Franklin R

    2012-09-01

    This in vitro study compared debridement efficacies of a sonic irrigation technique (Vibringe; Cavex Holland BV, Haarlem, The Netherlands) with side-vented needle irrigation (SNI) in the mesiobuccal root of maxillary first molars. Twenty roots with narrow isthmuses (≤ 1/4 canal diameter) were selected using micro-computed tomography scanning. Collagen solution was injected into canals/isthmuses and reconstituted with NH(4)OH to simulate canal debris. Each root was sealed apically and embedded in polyvinyl siloxane simulating a closed-canal system. Canals were instrumented to size 40/.04 taper 1 mm short of the anatomic apex. The final irrigation was performed with the Vibringe or SNI. Roots were demineralized, sectioned at 6 levels (1.2-3.2 mm) from the anatomic apex, and stained using Masson trichrome stain. The areas occupied by canals and isthmus and the debris-containing areas were statistically analyzed with repeated-measures analyses using "irrigation technique" as the between factor and "canal level" as the within factor (α = 0.05). Canals had significantly more debris at 1.2 and 1.6 mm (P .05). Considerably more debris remained at 1.2 and 2.0 mm for the Vibringe (P < .05). A significant difference was observed between the canal and the isthmus (P < .001). There is no difference between the Vibringe and SNI in their overall debridement efficacy in apical one third of the mesiobuccal root of maxillary first molars. Published by Elsevier Inc.

  18. Semicircular canal modeling in human perception.

    Science.gov (United States)

    Asadi, Houshyar; Mohamed, Shady; Lim, Chee Peng; Nahavandi, Saeid; Nalivaiko, Eugene

    2017-07-26

    The human vestibular system is a sensory and equilibrium system that manages and controls the human sense of balance and movement. It is the main sensor humans use to perceive rotational and linear motions. Determining an accurate mathematical model of the human vestibular system is significant for research pertaining to motion perception, as the quality and effectiveness of the motion cueing algorithm (MCA) directly depends on the mathematical model used in its design. This paper describes the history and analyses the development process of mathematical semicircular canal models. The aim of this review is to determine the most consistent and reliable mathematical semicircular canal models that agree with experimental results and theoretical analyses, and offer reliable approximations for the semicircular canal functions based on the existing studies. Selecting and formulating accurate mathematical models of semicircular canals are essential for implementation into the MCA and for ensuring effective human motion perception modeling.

  19. Design and Testing of a Bionic Dancing Prosthesis.

    Science.gov (United States)

    Rouse, Elliott J; Villagaray-Carski, Nathan C; Emerson, Robert W; Herr, Hugh M

    2015-01-01

    Traditionally, prosthetic leg research has focused on improving mobility for activities of daily living. Artistic expression such as dance, however, is not a common research topic and consequently prosthetic technology for dance has been severely limited for the disabled. This work focuses on investigating the ankle joint kinetics and kinematics during a Latin-American dance to provide unique motor options for disabled individuals beyond those of daily living. The objective of this study was to develop a control system for a bionic ankle prosthesis that outperforms conventional prostheses when dancing the rumba. The biomechanics of the ankle joint of a non-amputee, professional dancer were acquired for the development of the bionic control system. Subsequently, a professional dancer who received a traumatic transtibial amputation in April 2013 tested the bionic dance prosthesis and a conventional, passive prosthesis for comparison. The ability to provide similar torque-angle behavior of the biological ankle was assessed to quantify the biological realism of the prostheses. The bionic dancing prosthesis overlapped with 37 ± 6% of the non-amputee ankle torque and ankle angle data, compared to 26 ± 2% for the conventional, passive prosthesis, a statistically greater overlap (p = 0.01). This study lays the foundation for quantifying unique, expressive activity modes currently unavailable to individuals with disabilities. Future work will focus on an expansion of the methods and types of dance investigated in this work.

  20. Design and Testing of a Bionic Dancing Prosthesis.

    Directory of Open Access Journals (Sweden)

    Elliott J Rouse

    Full Text Available Traditionally, prosthetic leg research has focused on improving mobility for activities of daily living. Artistic expression such as dance, however, is not a common research topic and consequently prosthetic technology for dance has been severely limited for the disabled. This work focuses on investigating the ankle joint kinetics and kinematics during a Latin-American dance to provide unique motor options for disabled individuals beyond those of daily living. The objective of this study was to develop a control system for a bionic ankle prosthesis that outperforms conventional prostheses when dancing the rumba. The biomechanics of the ankle joint of a non-amputee, professional dancer were acquired for the development of the bionic control system. Subsequently, a professional dancer who received a traumatic transtibial amputation in April 2013 tested the bionic dance prosthesis and a conventional, passive prosthesis for comparison. The ability to provide similar torque-angle behavior of the biological ankle was assessed to quantify the biological realism of the prostheses. The bionic dancing prosthesis overlapped with 37 ± 6% of the non-amputee ankle torque and ankle angle data, compared to 26 ± 2% for the conventional, passive prosthesis, a statistically greater overlap (p = 0.01. This study lays the foundation for quantifying unique, expressive activity modes currently unavailable to individuals with disabilities. Future work will focus on an expansion of the methods and types of dance investigated in this work.

  1. A digital patient for computer-aided prosthesis design.

    Science.gov (United States)

    Colombo, Giorgio; Facoetti, Giancarlo; Rizzi, Caterina

    2013-04-06

    This article concerns the design of lower limb prosthesis, both below and above knee. It describes a new computer-based design framework and a digital model of the patient around which the prosthesis is designed and tested in a completely virtual environment. The virtual model of the patient is the backbone of the whole system, and it is based on a biomechanical general-purpose model customized with the patient's characteristics (e.g. anthropometric measures). The software platform adopts computer-aided and knowledge-guided approaches with the goal of replacing the current development process, mainly hand made, with a virtual one. It provides the prosthetics with a set of tools to design, configure and test the prosthesis and comprehends two main environments: the prosthesis modelling laboratory and the virtual testing laboratory. The first permits the three-dimensional model of the prosthesis to be configured and generated, while the second allows the prosthetics to virtually set up the artificial leg and simulate the patient's postures and movements, validating its functionality and configuration. General architecture and modelling/simulation tools for the platform are described as well as main aspects and results of the experimentation.

  2. [Design and study of carbon fiber tracheal prosthesis].

    Science.gov (United States)

    Qi, L; Liu, D; Han, Z; Wang, F

    1998-12-01

    32 healty adult dogs were selected for this experiment. 10 of them were subjected to the tracheal biomechanics test using indices including the relation between stretcher ratio (lambda) and stress (T), the squeeze stress (delta jy) of medical silk thread on trachea, the side stress (Ts) inducing the tracheal collapse, the functional maximum angle (psi max) of tracheal, and the sever area torsion angle (theta max) of tracheal functional maximum curved. According to the indices measured, two types of tracheal prosthesis were designed, and were made of carbon fiber and silicon. They were the straight tube type tracheal prosthesis and the bifurcate type tracheal prosthesis. The straight tube type tracheal prosthesis was studied with a design of two groups comprising a total of 11 dogs. In the experiment group (n = 6), the outer surface of the tube was not coated with silicon, the average survival period was 379.8 days. In the control group (n = 5), the outer surface of the tube was coated with silicon, the average survival period was 90.4 days. The bifurcate type tracheal prosthesis was studied in 11 dogs, the average survival period was 4.32 days. The main causes of death in the experiment were infection and anastomotic dehiscent.

  3. Closed-eye orbital prosthesis: a clinical report.

    Science.gov (United States)

    Hatamleh, Muhanad M; Watson, Jason; Srinivasan, Dilip

    2015-03-01

    One of the most challenging prostheses to fabricate is an acceptable orbital prosthesis. Successful reconstruction of the complex missing tissues, the globe, muscle, skin, and bony elements requires time and high levels of practical skill. A good match to the contralateral nondefect side will help mask the underlying defect and give the patient confidence to return to normal, routine life. The contralateral eye opening will commonly dictate the eye opening of such a prosthesis, but because of the expressive nature of the eye and its high levels of mobility, this can be difficult to achieve. This clinical report presents a patient who had an extended orbital exenteration and right maxillectomy to remove a maxillary squamous cell carcinoma. An alternative approach to constructing an orbital prosthesis was undertaken with the eye closed. Compared to the normal method of fabrication, this process was less complex and quicker, made the prosthesis less "staring," camouflaged the defect, and reduced the detection of the prosthesis because of movements in the remaining eye. The patient engaged in his routine daily life, which reinforced his self-esteem, confidence, and reintegration into the community. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  4. Split-Framework in Mandibular Implant-Supported Prosthesis

    Directory of Open Access Journals (Sweden)

    Danny Omar Mendoza Marin

    2015-01-01

    Full Text Available During oral rehabilitation of an edentulous patient with an implant-supported prosthesis, mandibular flexure must be considered an important biomechanical factor when planning the metal framework design, especially if implants are installed posterior to the interforaminal region. When an edentulous mandible is restored with a fixed implant-supported prosthesis connected by a fixed full-arch framework, mandibular flexure may cause needless stress in the overall restorative system and lead to screw loosening, poor fit of prosthesis, loss of the posterior implant, and patient’s discomfort due to deformation properties of the mandible during functional movements. The use of a split-framework could decrease the stress with a precise and passive fit on the implants and restore a more natural functional condition of the mandible, helping in the longevity of the prosthesis. Therefore, the present clinical report describes the oral rehabilitation of an edentulous patient by a mandibular fixed implant-supported prosthesis with a split-framework to compensate for mandibular flexure. Clinical Significance. The present clinical report shows that the use of a split-framework reduced the risk of loss of the posterior implants or screws loosening with acceptable patient comfort over the period of a year. The split-framework might have compensated for the mandibular flexure during functional activities.

  5. [Tracheal reconstruction with memory alloy prosthesis coated with collagen].

    Science.gov (United States)

    Lin, Hai-ping; Cao, Zi-ang; Gu, Xu-dong; Pan, Wen-biao; Wu, Xue-jun; Zhang, Gu-lan

    2007-03-01

    To investigate the feasibility of tracheal reconstruction with a prosthesis made of memory alloy coated with collagen sponge in mongrel dogs. The basic skeleton of the prosthesis was knitted with Ni-Ti memory alloy wires. The tubular mesh was sealed with polyurethane membrane and then inner and external walls of the lumen were coated with collagen sponge. Cervical trachea segmental reconstruction was performed in 8 mongrel dogs with these prostheses. The efficacy of the implanted prostheses were periodically evaluated after operation using x-ray, tracheoscopy and specimen microscope examinations. One dog died of prosthesis dislocation 10 days after operation, another was killed 45 days later because of anastomotic stenosis. 6 dogs survived more than 90 days and the longest one lived for 150 days. Its implanted prosthesis was completely incorporated with the recipient tissue, where re-epithelialization occluded on anastomotic sites. The tracheal lumen was patent. This memory alloy tracheal prosthesis has been proved useful for reconstruction of large, circumferential tracheal defects, although its long-term safety and efficiency need to be confirmed.

  6. Estimation of crank angle for cycling with a powered prosthesis.

    Science.gov (United States)

    Lawson, B E; Shultz, A; Ledoux, E; Goldfarb, M

    2014-01-01

    In order for a prosthesis to restore power generation during cycling, it must supply torque in a manner that is coordinated with the motion of the bicycle crank. This paper outlines an algorithm for the real time estimation of the angular position of a bicycle crankshaft using only measurements internal to an intelligent knee and ankle prosthesis. The algorithm assumes that the rider/prosthesis/bicycle system can be modeled as a four-bar mechanism. Assuming that a prosthesis can generate two independent angular measurements of the mechanism (in this case the knee angle and the absolute orientation of the shank), Freudenstein's equation can be used to synthesize the mechanism continuously. A recursive least-squares algorithm is implemented to estimate the Freudenstein coefficients, and the resulting link lengths are used to reformulate the equation in terms of input-output relationships mapping both measured angles to the crank angle. Using two independent measurements allows the algorithm to uniquely determine the crank angle from multi-valued functions. In order to validate the algorithm, a bicycle was mounted on a trainer and configured with the prosthesis using an artificial hip joint attached to the seat post. Motion capture was used to monitor the mechanism for forward and backward pedaling and the results are compared to the output of the presented algorithm. Once the parameters have converged, the algorithm is shown to predict the crank angle within 15° of the externally measured value throughout the entire crank cycle during forward rotation.

  7. Design and Control of a Pneumatically Actuated Transtibial Prosthesis

    Science.gov (United States)

    Zheng, Hao; Shen, Xiangrong

    2015-01-01

    This paper presents the design and control of a pneumatically actuated transtibial prosthesis, which utilizes a pneumatic cylinder-type actuator to power the prosthetic ankle joint to support the user's locomotion. The pneumatic actuator has multiple advantages over the traditional electric motor, such as light weight, low cost, and high power-to-weight ratio. The objective of this work is to develop a compact and lightweight transtibial prosthesis, leveraging the multiple advantages provided by this highly competitive actuator. In this paper, the design details of the prosthesis are described, including the determination of performance specifications, the layout of the actuation mechanism, and the calculation of the torque capacity. Through the authors’ design calculation, the prosthesis is able to provide sufficient range of motion and torque capacity to support the locomotion of a 75 kg individual. The controller design is also described, including the underlying biomechanical analysis and the formulation of the finite-state impedance controller. Finally, the human subject testing results are presented, with the data indicating that the prosthesis is able to generate a natural walking gait and sufficient power output for its amputee user. PMID:26146497

  8. Intermanual Transfer Effects in Below-Elbow Myoelectric Prosthesis Users.

    Science.gov (United States)

    de Boer, Errit; Romkema, Sietske; Cutti, Andrea G; Brouwers, Michael A; Bongers, Raoul M; van der Sluis, Corry K

    2016-11-01

    To determine intermanual transfer effects in patients with a below-elbow amputation using a myoelectric prosthesis and to establish whether laterality affects these effects. Case-control. A standardized setting in a rehabilitation clinic. A convenience sample (N=44) of experienced myoelectric prosthesis users (n=22) and matched controls (n=22). Controls were matched on sex, age (±5y), and hand dominance. Both the experienced group and the control group performed several tasks using a prosthesis simulator attached to their nonaffected arm. Movement time, force control, Box and Block test (BBT) scores, and duration of hand opening. Movement times of myoelectric prosthesis users were shorter, and these users had significantly higher BBT scores and shorter hand opening durations than those of controls. No intermanual transfer effects on force control and no laterality effects were found. Intermanual transfer effects were present in experienced myoelectric prosthesis users with a below-elbow amputation, independent of laterality. These findings support the clinical relevance of intermanual transfer training, which may facilitate persons with an upper limb amputation to start training directly after the amputation. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  9. Functional improvement with digital prosthesis use after multiple digit amputations.

    Science.gov (United States)

    Lifchez, Scott D; Marchant-Hanson, Judith; Matloub, Hani S; Sanger, James R; Dzwierzynski, William W; Nguyen, Hanh H

    2005-07-01

    Patients who sustain traumatic amputation of multiple fingers suffer both a functional and psychologic loss. Previous studies of prosthesis use for finger amputees have focused primarily on the psychologic benefits. Clinically our group noticed a functional improvement on hand function tests when patients with multiple digit amputations used a prosthesis. Given the expense of multiple finger prostheses we sought to determine if they led to a consistent functional improvement in these patients. Ten consecutive patients performed a battery of hand function tests and rated their ability to perform a variety of activities of daily living both with and without their prosthesis using the Disabilities of the Arm, Shoulder, and Hand questionnaire. Our results show a significant improvement in 3-finger-pinch strength and grip strength and a trend of improvement of tip-pinch, lateral-pinch, and grip strength in dynamometer positions 1, 2, 3, and 4 in these patients when tested with and without their prostheses. Function in activities of daily living, as assessed by the Disabilities of the Arm, Shoulder, and Hand questionnaire, was improved globally with prosthesis use. In addition, significant improvement was noted in several specific activities including opening a jar, writing, and turning a key, among others. These results show that prosthesis use provides a functional benefit to these patients in multiple activities.

  10. The making of indigenous vascular prosthesis

    Directory of Open Access Journals (Sweden)

    Madathipat Unnikrishnan

    2016-01-01

    Full Text Available Background & objectives: Vascular illnesses are on the rise in India, due to increase in lifestyle diseases and demographic transition, requiring intervention to save life, organ or limbs using vascular prosthesis. The aim of this study was to develop indigenous large diameter vascular graft for treatment of patients with vascular pathologies. Methods: The South India Textile Research Association, at Coimbatore, Tamil Nadu, India, developed seamless woven polyester (Polyethylene terephthalate graft at its research wing. Further characterization and testing followed by clinical trials were conducted at Sree Chitra Tirunal Institute for Medical Sciences and Technology, Thiruvananthapuram, Kerala, India. Fifteen in vivo experiments were carried out in 1992-1994 in pigs as animal model. Controlled (phase I clinical trial in ten patients was performed along with control graft. Thereafter, phase II trial involved 22 patients who underwent multi-centre clinical trial in four centres across India. Results: Laboratory testing showed that polyester graft was non-toxic, non-leeching and non-haemolytic with preserved long-term quality, further confirming in pigs by implanting in thoracic aorta, comparable to control Dacron grafts. Perigraft incorporation and smooth neointima formation which are prime features of excellent healing characteristics, were noted at explantation at planned intervals. Subsequently in the phase I and II clinical trials, all patients had excellent recovery without mortality or device-related adverse events. Patients receiving the test graft were followed up for 10 and 5 years, respectively. Serial clinical, duplex scans and CT angiograms performed periodically confirmed excellent graft performance. Interpretation & conclusions: Indigenously developed Chitra vascular graft was comparable to commercially available Dacron graft, ready for clinical use at affordable cost to patients as against costly imported grafts.

  11. Active Bone Conduction Prosthesis: BonebridgeTM

    Directory of Open Access Journals (Sweden)

    Zernotti, Mario E.

    2015-10-01

    Full Text Available Introduction Bone conduction implants are indicated for patients with conductive and mixed hearing loss, as well as for patients with single-sided deafness (SSD. The transcutaneous technology avoids several complications of the percutaneous bone conduction implants including skin reaction, skin growth over the abutment, and wound infection. The Bonebridge (MED-EL, Austria prosthesis is a semi-implantable hearing system: the BCI (Bone Conduction Implant is the implantable part that contains the Bone Conduction-Floating Mass Transducer (BC-FMT, which applies the vibrations directly to the bone; the external component is the audio processor Amadé BB (MED-EL, Austria, which digitally processes the sound and sends the information through the coil to the internal part. Bonebridge may be implanted through three different approaches: the transmastoid, the retrosigmoid, or the middle fossa approach. Objective This systematic review aims to describe the world́s first active bone conduction implant system, Bonebridge, as well as describe the surgical techniques in the three possible approaches, showing results from implant centers in the world in terms of functional gain, speech reception thresholds and word recognition scores. Data Synthesis The authors searched the MEDLINE database using the key term Bonebridge. They selected only five publications to include in this systematic review. The review analyzes 20 patients that received Bonebridge implants with different approaches and pathologies. Conclusion Bonebridge is a solution for patients with conductive/mixed hearing loss and SSD with different surgical approaches, depending on their anatomy. The system imparts fewer complications than percutaneous bone conduction implants and shows proven benefits in speech discrimination and functional gain.

  12. In vivo performance of photovoltaic subretinal prosthesis

    Science.gov (United States)

    Mandel, Yossi; Goetz, George; Lavinsky, Daniel; Huie, Phil; Mathieson, Keith; Wang, Lele; Kamins, Theodore; Manivanh, Richard; Harris, James; Palanker, Daniel

    2013-02-01

    We have developed a photovoltaic retinal prosthesis, in which camera-captured images are projected onto the retina using pulsed near-IR light. Each pixel in the subretinal implant directly converts pulsed light into local electric current to stimulate the nearby inner retinal neurons. 30 μm-thick implants with pixel sizes of 280, 140 and 70 μm were successfully implanted in the subretinal space of wild type (WT, Long-Evans) and degenerate (Royal College of Surgeons, RCS) rats. Optical Coherence Tomography and fluorescein angiography demonstrated normal retinal thickness and healthy vasculature above the implants upon 6 months follow-up. Stimulation with NIR pulses over the implant elicited robust visual evoked potentials (VEP) at safe irradiance levels. Thresholds increased with decreasing pulse duration and pixel size: with 10 ms pulses it went from 0.5 mW/mm2 on 280 μm pixels to 1.1 mW/mm2 on 140 μm pixels, to 2.1 mW/mm2 on 70 μm pixels. Latency of the implant-evoked VEP was at least 30 ms shorter than in response evoked by the visible light, due to lack of phototransduction. Like with the visible light stimulation in normal sighted animals, amplitude of the implant-induced VEP increased logarithmically with peak irradiance and pulse duration. It decreased with increasing frequency similar to the visible light response in the range of 2 - 10 Hz, but decreased slower than the visible light response at 20 - 40 Hz. Modular design of the photovoltaic arrays allows scalability to a large number of pixels, and combined with the ease of implantation, offers a promising approach to restoration of sight in patients blinded by retinal degenerative diseases.

  13. Surgical feasibility and biocompatibility of wide-field dual-array suprachoroidal-transretinal stimulation prosthesis in middle-sized animals.

    Science.gov (United States)

    Lohmann, Tibor Karl; Kanda, Hiroyuki; Morimoto, Takeshi; Endo, Takao; Miyoshi, Tomomitsu; Nishida, Kentaro; Kamei, Motohiro; Walter, Peter; Fujikado, Takashi

    2016-04-01

    To investigate the safety and efficacy of a newly-developed wide-field dual-array suprachoroidal-transretinal stimulation (STS) prosthesis in middle-sized animals. The prosthesis consisted of two arrays with 50 to 74 electrodes. To test the feasibility of implanting the prosthesis and its efficacy, the prosthesis was implanted for 14 days into two rabbits. Optical coherence tomography (OCT) and ophthalmoscopy were performed 7 and 14 days after the implantation. Then the rabbits were euthanized, eyes were enucleated, and the posterior segment of the eye was examined histologically. In a second experiment, the arrays were implanted into two cats, and their ability to elicit neural responses was determined by electrically evoked potentials (EEPs) at the chiasm and by optical imaging of the retina. All arrays were successfully implanted, and no major complications occurred during the surgery or during the 2-week postoperative period. Neither OCT nor ophthalmoscopy showed any major complications or instability of the arrays. Histological evaluations showed only mild cellular infiltration and overall good retinal preservation. Stimulation of the retina by the arrays evoked EEPs recorded from the chiasm. Retinal imaging showed that the electrical pulses from the arrays altered the retinal images indicating an activation of retinal neurons. The thresholds were as low as 100 μA for a chiasm response and 300 μA for the retinal imaging. Implantation of a newly-developed dual-array STS prosthesis for 2 weeks in rabbits was feasible surgically, and safe. The results of retinal imaging showed that the dual-array system was able to activate retinal neurons. We conclude that the dual-array design can be implanted without complication and is able to activate retinal neurons and optic nerve axons.

  14. Multimodal sensor controlled three Degree of Freedom transradial prosthesis.

    Science.gov (United States)

    Ohnishi, Kengo; Morio, Toshiyuki; Takagi, Tomoo; Kajitani, Isamu

    2013-06-01

    This paper describes the basic concept of our multimodal sensor control system for 3-Degree-of-Freedom transradial prosthesis. The target of developing the controller is to reduce the mental effort of planning operating multiple joints in the conventional multifunctional myoelectric controller and reduce the compensating motion of conventional myoelectric prosthesis. An accelerometer is installed in the socket and the angles of the gravitational force are computed to drive the pronation/spination joint and the palmar flexion/dorsifelxion joint of the prosthesis. A threshold On/Off control using the posture information is implemented with the triggering of a co-contraction EMG signal. Through experiment with able-body subjects, we confirmed that this controller has a potential of reducing compensating shoulder movements for pick-raise-place tasks, when compared to the task conducted with conventional locked-wrist prostheses. Yet modification is required for stability.

  15. Research, design and development project Myoelectric Prosthesis of Upper Limb

    Energy Technology Data Exchange (ETDEWEB)

    Galiano, L; Montaner, E; Flecha, A [Bioparx, J Hernandez 1101, Parana, ERios (Argentina)

    2007-11-15

    A Research Design and Development Project was developed of a myoelectric prosthesis for a pediatric patient presenting congenital amputation of the left forearm below the elbow. A multidisciplinary work-team was formed for this goal, in order to solve the several (/various) aspects regarding this project (mechanical, ergonomics, electronics, physical). The prosthesis as an electromechanical device was divided in several blocks, trying to achieve a focused development for each stage, acording to requisites. A mechanical prototype of the prothesis was designed and built along with the circuitry needed for EMG aquisition, control logic and drivers. Having acomplished the previuos stages, the project is now dealing with the definitions of the interface between the prosthesis and the patient, with promising perspectives.

  16. Implant-retained finger prosthesis with modified retention system.

    Science.gov (United States)

    Goiato, Marcelo Coelho; dos Santos, Daniela Micheline; Amoroso, Andressa Paschoal; Gennari Filho, Humberto; Dekon, Stefan Fiuza de Carvalho

    2013-08-01

    Amputations affect both the physical and the psychological aspects of an individual, causing significant impact on self-esteem. The main causes of finger amputations are work-related accidents with dangerous machinery, road traffic accidents, and animal bites, as well as systemic diseases such as diabetes. This report aims to describe a simple technique for fabrication of implant-retained finger prosthesis with a modified base of the retention system. The O-Ring retention system was used with a modified hexagon-shaped base and a metallic capsule adapted to the acrylic resin to attach the prosthesis to the implant. The prosthesis was made with silicone, and after osseointegration, it was installed without complications, leading to a patient satisfied with the end result and encouraged to return to social life. Restoring self-esteem in the patient and static and functional rehabilitation.

  17. Mastication improvement after partial implant-supported prosthesis use.

    Science.gov (United States)

    Gonçalves, T M S V; Campos, C H; Gonçalves, G M; de Moraes, M; Rodrigues Garcia, R C M

    2013-12-01

    Partially edentulous patients may be rehabilitated by the placement of removable dental prostheses, implant-supported removable dental prostheses, or partial implant fixed dental prostheses. However, it is unclear the impact of each prosthesis type over the masticatory aspects, which represents the objective of this paired clinical trial. Twelve patients sequentially received and used each of these 3 prosthesis types for 2 months, after which maximum bite force was assessed by a strain sensor and food comminution index was determined with the sieving method. Masseter and temporal muscle thicknesses during rest and maximal clenching were also evaluated by ultrasonography. Each maxillary arch received a new complete denture that was used throughout the study. Data were analyzed by analysis of variance for repeated measures, followed by the Tukey test (p mastication, and the magnitude of this effect was related to prosthesis type.

  18. [Tests of hand functionality in upper limb amputation with prosthesis].

    Science.gov (United States)

    Bazzini, G; Orlandini, D; Moscato, T A; Nicita, D; Panigazzi, M

    2007-01-01

    The need for standardized instruments for clinical measurements has become pressing in the fields of occupational rehabilitation and ergonomics. This is particularly the case for instruments that allow a quantitative evaluation of upper limb function, and especially hand function in patients who have undergone an amputation and then application of an upper limb prosthesis. This study presents a review of the main tests used to evaluate hand function, with a critical analysis of their use in subjects with an upper limb prosthesis. The tests are divided into: tests to evaluate strength, tests to evaluate co-ordination and dexterity, tests of global or overall function, and tests proposed specifically for subjects with an upper limb prosthesis. Of the various tests presented, the authors give their preference to the Bimanual Functional Assessment, Abilhand and/or the ADL Questionnaire, because of the practical usefulness, clinimetric features, simplicity and ease of administration of these tests.

  19. The fluid mechanics of root canal irrigation.

    Science.gov (United States)

    Gulabivala, K; Ng, Y-L; Gilbertson, M; Eames, I

    2010-12-01

    Root canal treatment is a common dental operation aimed at removing the contents of the geometrically complex canal chambers within teeth; its purpose is to remove diseased or infected tissue. The complex chamber is first enlarged and shaped by instruments to a size sufficient to deliver antibacterial fluids. These irrigants help to dissolve dying tissue, disinfect the canal walls and space and flush out debris. The effectiveness of the procedure is limited by access to the canal terminus. Endodontic research is focused on finding the instruments and clinical procedures that might improve success rates by more effectively reaching the apical anatomy. The individual factors affecting treatment outcome have not been unequivocally deciphered, partly because of the difficulty in isolating them and in making the link between simplified, general experimental models and the complex biological objects that are teeth. Explicitly considering the physical processes within the root canal can contribute to the resolution of these problems. The central problem is one of fluid motion in a confined geometry, which makes the dispersion and mixing of irrigant more difficult because of the absence of turbulence over much of the canal volume. The effects of treatments can be understood through the use of scale models, mathematical modelling and numerical computations. A particular concern in treatment is that caustic irrigant may penetrate beyond the root canal, causing chemical damage to the jawbone. In fact, a stagnation plane exists beyond the needle tip, which the irrigant cannot penetrate. The goal is therefore to shift the stagnation plane apically to be coincident with the canal terminus without extending beyond it. Needle design may solve some of the problems but the best design for irrigant penetration conflicts with that for optimal removal of the bacterial biofilm from the canal wall. Both irrigant penetration and biofilm removal may be improved through canal fluid

  20. 21 CFR 888.3810 - Wrist joint ulnar (hemi-wrist) polymer prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint ulnar (hemi-wrist) polymer prosthesis... SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3810 Wrist joint ulnar (hemi-wrist) polymer prosthesis. (a) Identification. A wrist joint ulnar (hemi-wrist) polymer prosthesis...

  1. 21 CFR 888.3770 - Wrist joint carpal trapezium polymer prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint carpal trapezium polymer prosthesis... SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3770 Wrist joint carpal trapezium polymer prosthesis. (a) Identification. A wrist joint carpal trapezium polymer prosthesis is a one...

  2. 21 CFR 888.3760 - Wrist joint carpal scaphoid polymer prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint carpal scaphoid polymer prosthesis... SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3760 Wrist joint carpal scaphoid polymer prosthesis. (a) Identification. A wrist joint carpal scaphoid polymer prosthesis is a one...

  3. 21 CFR 888.3750 - Wrist joint carpal lunate polymer prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Wrist joint carpal lunate polymer prosthesis. 888... SERVICES (CONTINUED) MEDICAL DEVICES ORTHOPEDIC DEVICES Prosthetic Devices § 888.3750 Wrist joint carpal lunate polymer prosthesis. (a) Identification. A wrist joint carpal lunate prosthesis is a one-piece...

  4. A short-term study in sheep with the Groningen temporomandibular joint prosthesis

    NARCIS (Netherlands)

    van Loon, JP; de Bont, LGM; Spijkervet, FKL; Verkerke, GJ; Liem, RSB

    2000-01-01

    As part of the pre-clinical testing process of a newly developed temporomandibular joint (TMJ) prosthesis, animal experiments were performed. In 14 sheep, the right TMJ was replaced by the developed TMJ prosthesis. The prosthesis consisted of a skull part, a mandibular part and an intervening

  5. Aerodynamic characteristics of the Nijdam voice prosthesis in relation to tracheo-esophageal wall thickness.

    Science.gov (United States)

    Veenstra, A; van den Hoogen, F J; Schutte, H K; Nijdam, H F; Manni, J J; Verkerke, G J

    1997-01-01

    Tracheo-esophageal speech using various prostheses is currently the most successful form of voice and speech rehabilitation for laryngectomies. Main inter-device differences are durability and trans-device pressure loss during speech. The valveless indwelling Nijdam voice prosthesis is a new voice prosthesis. A barrier mechanism is created by a combination of the esophageal mucosa and the umbrella-like "hat" of the prosthesis that covers the esophageal side of the tracheo-esophageal fistula. The Nijdam prosthesis can be used clinically for longer periods of time when compared to such other indwelling voice prostheses as the Provox prosthesis and the low-resistance Groningen prosthesis. However, transdevice pressure loss during speech has been unknown. Adjustment of the shft length of the Nijdam voice prosthesis to tracheo-esophageal wall thickness was expected to affect trans-device pressure loss during speech. We report the results of in vitro tests to quantify the effect of tracheo-esophageal wall thickness on trans-device pressure loss. In the present study pressure loss was measured at different air flow rates in relation to tracheo-esophageal wall thickness. Findings demonstrated that when shaft length of the Nijdam prosthesis corresponded exactly to tracheo-esophageal wall thickness, trans-device pressure loss was comparable to that of the Provox prosthesis. If a relatively shorter Nijdam prosthesis was chosen to prevent aspiration from occurring, the pressure loss across the prosthesis increased to that of the low-resistance Groningen prosthesis.

  6. A new total distal radioulnar joint prosthesis: functional outcome.

    Science.gov (United States)

    Schuurman, Arnold H; Teunis, Teun

    2010-10-01

    To present the evolution of design and the short-term functional outcome of our distal radioulnar joint (DRUJ) prosthesis. This total DRUJ prosthesis differs from others in that it consists of 2 parts and attains bony fixation by its hydroxyapatite coating. Nineteen patients received a DRUJ prosthesis after a failed Darrach procedure (n = 10), Sauvé-Kapandji procedure (n = 7), trauma (n = 1), or DRUJ synovitis (n = 1). Indications for the placement were decreased grip, decreased forearm motion, and pain due to ulnar impingement syndrome and instability of the distal ulna. Seven prostheses were removed, 5 due to loosening, 1 due to continuing pain, and 1 at the request of the patient. The 5 prostheses that loosened were an intermediate prototype no longer in use. In 12 remaining cases, range of motion, grip strength, and pinch strength were measured, and patients completed the Disabilities of the Arm, Shoulder, and Hand (DASH) questionnaire. Pain was assessed with the visual analog scale (range, 0-10). A paired t-test was performed to assess the significance of the difference between preoperative and postoperative measurements. Statistically significant improvements were seen in forearm pronation, from an average of 79° to 88°; grip strength, from an average of 10 kg to an average of 16 kg; and visual analog scale score, decreased from a mean of 5.3 to a mean of 3.5. The distal ulna was clinically stable in all 12 patients who retained the prosthesis. The intermediate prototype had a high failure rate, 5 out of 5. The early results for the current prosthesis prototype show clinical improvement. Based on these results, we conclude that this prosthesis offers a new treatment option for ulnar instability after distal ulnar resection. Therapeutic IV. Copyright © 2010. Published by Elsevier Inc.

  7. Posterior semicircular canal dehiscence: a morphologic cause of vertigo similar to superior semicircular canal dehiscence

    Energy Technology Data Exchange (ETDEWEB)

    Krombach, G.A.; Schmitz-Rode, T.; Haage, P.; Guenther, R.W. [Department of Diagnostic Radiology, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany); DiMartino, E. [Department of Otorhinolaryngology, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany); Prescher, A. [Department of Anatomy, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany); Kinzel, S. [Department of Experimental Veterinarian Medicine, University of Technology, Pauwelstrasse 30, 52057, Aachen (Germany)

    2003-06-01

    Heading Abstract.The aim of this study was to assess imaging findings of posterior semicircular dehiscence on computed tomography and to evaluate incidence of posterior and superior semicircular canal dehiscence in patients presenting with vertigo, sensorineuronal hearing loss or in a control group without symptoms related to the inner ear. Computed tomography was performed in 507 patients presenting either with vertigo (n=128; 23 of these patients suffered also from sensorineuronal hearing loss), other symptoms related to the inner ear, such as hearing loss or tinnitus (n=183) or symptoms unrelated to the labyrinth (n=196). All images were reviewed for presence of dehiscence of the bone, overlying the semicircular canals. Twenty-nine patients had superior semicircular canal dehiscence. Of these patients, 83% presented with vertigo, 10% with hearing loss or tinnitus and the remaining 7% with symptoms unrelated to the inner ear. In 23 patients dehiscence of the posterior semicircular canal was encountered. Of these patients, 86% presented with vertigo, 9% with hearing loss or tinnitus and 5% with symptoms unrelated to the inner ear. Defects of the bony overly are found at the posterior semicircular canal, in addition to the recently introduced superior canal dehiscence syndrome. Significant prevalence of vertigo in these patients suggests that posterior semicircular canal dehiscence can cause vertigo, similar to superior semicircular canal dehiscence. (orig.)

  8. Dynamics of dental implants and orthodontics in today's periodontal prosthesis.

    Science.gov (United States)

    Cheng, Y M

    2000-03-01

    Periodontal prosthesis refers to multidisciplinary efforts to stop disease progression, correct deformities created by dental diseases, and establish a therapeutic occlusion to restore the form and function of the masticatory system. These efforts are critical for the long-term prognosis and maintenance of the guarded teeth and the overall prosthesis. This article presents a functionally and esthetically challenging case, which illustrates a multidisciplinary approach--specifically implantology and orthodontics--and how they impact on each other during treatment. The role and importance of dental implants and orthodontics in setting up a case is illustrated in this article.

  9. Design of an Accessible, Powered Myoelectrically Controlled Hand Prosthesis

    Directory of Open Access Journals (Sweden)

    Osman Onur Akirmak

    2017-08-01

    Full Text Available In this paper we describe accessible myoelectric prosthetic hand design based on modification of existing mechanical prosthesis and off-the-shelf parts and components. Despite significant advances in myoelectric prosthetics, such existing devices remain out of reach of the majority of the patients needing them due to high costs and complexity. We describe a simple design that can be assembled based on existing or readily acquirable parts at approximately 1/100 of the cheapest commercially available alternative. Our design offers wrist disarticulation patients in developing countries an affordable myoelectric prosthesis with significant capacity for improving their quality of life.

  10. ERRATUM: In vivo evaluation of a neural stem cell-seeded prosthesis In vivo evaluation of a neural stem cell-seeded prosthesis

    Science.gov (United States)

    Purcell, E. K.; Seymour, J. P.; Yandamuri, S.; Kipke, D. R.

    2009-08-01

    In the published article, an error was made in figure 5. Specifically, the three-month, NSC-seeded image is a duplicate of the six-week image, and the one-day, probe alone image is a duplicate of the three-month image. The corrected figure is reproduced below. Figure 5 Figure 5. Glial encapsulation of each probe condition over the 3 month time course. Ox-42 labeled microglia and GFAP labeled astrocytes are shown. Images are taken from probes implanted in the same animal at each time point. NSC seeding was associated with reduced non-neuronal density at 1 day post-implantation in comparison to alginate coated probes and at the 1 week time point in comparison to untreated probes (P encapsulation layer surrounds probes at the 6 week and 3 month time points, with NSC-seeded probes having the greatest surrounding non-neuronal density P alginate probe initially, whereas activated cells with an amoeboid structure were found near an alginate probe in the same hemisphere of one animal (left panels).

  11. Management of C-shaped canals: Two case reports

    Directory of Open Access Journals (Sweden)

    Nilesh Suryakant Kadam

    2013-01-01

    Full Text Available A C-shaped canal with varying configuration is commonly observed in single-rooted mandibular second molars. Cooke and Cox (1979 first documented the C-shaped canal in endodontic literature. The presence of high incidence of transverse anastomoses, lateral canals, and apical deltas makes it difficult to clean and seal the root canal system in these teeth. The main reason for failure in endodontic treatment of mandibular second molars is the inability to detect the presence of C-shaped canals prior to an endodontic therapy. This case report presents successful management of two rare cases of C-shaped canal configurations.

  12. Function of lateral line canal morphology.

    Science.gov (United States)

    Klein, Adrian; Bleckmann, Horst

    2015-01-01

    Fish perceive water motions and pressure gradients with their lateral line. Lateral line information is used for prey detection, spatial orientation, predator avoidance, schooling behavior, intraspecific communication and station holding. The lateral line of most fishes consists of superficial neuromasts (SNs) and canal neuromasts (CNs). The distribution of SNs and CNs shows a high degree of variation among fishes. Researchers have speculated for decades about the functional significance of this diversity, often without any conclusive answers. Klein et al. (2013) examined how tubules, pore number and pore patterns affect the filter properties of lateral line canals in a marine teleost, the black prickleback (Xiphister atropurpureus). A preliminary mathematical model was formulated and biomimetic sensors were built. For the present study the mathematical model was extended to understand the major underlying principle of how canal dimensions influence the filter properties of the lateral line. Both the extended mathematical model and the sensor experiments show that the number and distribution of pores determine the spatial filter properties of the lateral line. In an environment with little hydrodynamic noise, simple and complex lateral line canals have comparable response properties. However, if exposed to highly turbulent conditions, canals with numerous widely spaced pores increase the signal to noise ratio significantly. © 2014 International Society of Zoological Sciences, Institute of Zoology/Chinese Academy of Sciences and Wiley Publishing Asia Pty Ltd.

  13. Prosthetic Rehabilitation of a Patient with Ocular Defect using Semi-customized Prosthesis: A Case Report.

    Science.gov (United States)

    Putanikar, Nagaraj Y; Patil, Anandkumar G; Shetty, Pavithra K; Nagaral, Suresh; Mithaiwala, Hatimali I

    2015-04-01

    Severe physical and psychological distress occurs due to disfigurement caused by loss of eye. Ocular prosthesis is the only mode of rehabilitation for the missing eye. There are different materials and techniques used for the fabrication of the same. Resin proved to be the better among the available materials. Either using the stock eye or using customized ocular prosthesis has their own advantages and disadvantages. Through our clinical report, we have fabricated a semi-customized ocular prosthesis with stock iris and customized sclera. This prosthesis had the advantages of both stock and custom ocular prosthesis providing functionally and esthetically satisfactory result.

  14. Rehabilitation of orbital defect with silicone orbital prosthesis retained by dental implants

    Directory of Open Access Journals (Sweden)

    Satyabodh Shesharaj Guttal

    2016-01-01

    Full Text Available Orbital defects can result from cancer, birth anomalies, or trauma leading to an onslaught of problems in the function and psyche of the patient. These defects are restored by surgical reconstruction and followed by placement of orbital prosthesis for cosmetic makeup. The use of dental implants in retaining orbital prosthesis improves patient acceptance of the prosthesis owing to better retention and stability than conventional adhesive retained prosthesis. This case report describes a custom-made magnetic retentive assembly anchored by a dental implant which offers the orbital prosthesis the simplicity of self-alignment and ease of use.

  15. Rehabilitation of orbital defect with silicone orbital prosthesis retained by dental implants.

    Science.gov (United States)

    Guttal, Satyabodh Shesharaj; Desai, Jhanvi; Kudva, Adarsh; Patil, Basavaraj R

    2016-01-01

    Orbital defects can result from cancer, birth anomalies, or trauma leading to an onslaught of problems in the function and psyche of the patient. These defects are restored by surgical reconstruction and followed by placement of orbital prosthesis for cosmetic makeup. The use of dental implants in retaining orbital prosthesis improves patient acceptance of the prosthesis owing to better retention and stability than conventional adhesive retained prosthesis. This case report describes a custom-made magnetic retentive assembly anchored by a dental implant which offers the orbital prosthesis the simplicity of self-alignment and ease of use.

  16. Management of long span partially edentulous maxilla with fixed removable denture prosthesis

    Directory of Open Access Journals (Sweden)

    Mahilan I Jeyavalan

    2012-01-01

    Full Text Available Restoration of a long span partially edentulous maxilla with tooth supported prosthesis is challenging because of inherent anatomic limitations and unfavourable biomechanics present after the loss of teeth. A tooth supported fixed-removable prosthesis is a treatment option for restoration of such long span partially edentulous maxillary arches. This prosthesis meets the requirements for esthetics, phonetics, comfort, and hygiene, as well as favourable biomechanical stress distribution to the remaining natural tooth abutments. This article presents a procedure for fabrication of a fixed-removable prosthesis that has cement-retained custom cast bar metal substructure and a ball attachment retained removable superstructure prosthesis.

  17. Study of root canal accessibility in human primary molars.

    Science.gov (United States)

    Aminabadi, Naser A; Farahani, Ramin M Z; Gajan, Esrafil B

    2008-03-01

    The aim of the present study was to provide a general scheme for pulpectomy of primary molars that may be useful for decision-making about negotiation of root canals and selection of appropriate instruments. A total of 160 vital primary molars in 85 patients (40 males, 45 females) aged 4-6 years were selected. After taking primary radiographs, local anesthesia was induced, and the teeth were isolated using a rubber dam. Canal accessibility index (CAI) and tooth accessibility index (TAI) were calculated according to initial file size. Mandibular first molars had either three canals (79.2%) or four canals (20.8%), and all second molars had four canals. Maxillary first molars had three canals and second molars had either three canals (70.9%) or four canals (29.1%). Lower accessibility of the mandibular first molar distobuccal root accounted for the lower accessibility of these teeth in comparison with mandibular second molars. While three-canal maxillary second molars were more accessible due to the lower accessibility of the distobuccal canal of the maxillary first molar, poor accessibility of the distal canal in four-canal second molars was responsible for the difficult accessibility of these teeth. In conclusion, it seems that the accessibility of a single canal in each tooth determines the difficulty of accessibility for any given tooth. Moreover, while primary second molars are more accessible than first molars, all of them are negotiable.

  18. Malleus-to-footplate ossicular reconstruction prosthesis positioning: cochleovestibular pressure optimization.

    Science.gov (United States)

    Puria, Sunil; Kunda, Larisa D; Roberson, Joseph B; Perkins, Rodney C

    2005-05-01

    To determine 1) the best position for hydroxylapatite malleus-to-footplate (MFP), ossicular replacement prosthesis (ORP) in reconstructed ears, and 2) whether preserving the stapes superstructure (SS), when present, has acoustic advantages. Positioning of the MFP-ORP head beneath the neck of the malleus may produce maximal force, whereas positioning beneath the manubrium of the malleus may produce the greatest displacement. It is not clear which is the optimal placement position. In addition, we look at the effect of the SS on sound transmission to the inner ear in ossicular reconstruction. The ear-canal air pressure and vestibular hydro-pressure were measured in human cadaver temporal bones with incus intact, removed, and replaced with the MFP-ORP; the ORP head was placed at three different positions on the malleus (head, mid-manubrium, and umbo) while keeping its base at the center of stapes footplate with intact or removed stapes SS. The vestibular pressure ratio between the ear with intact incus and MFP-ORP reconstructed ear is defined as Lmfp, the loss caused by the prosthesis in relation to the normal ossicular chain. The mean magnitude of Lmfp, averaged in the important speech frequency region of 0.5 to 3 kHz, is approximately 7.8 dB at the neck with stapes SS. In comparison, mean magnitude of Lmfp for mid-manubrium without stapes SS is 15 dB (p = 0.04), and with the stapes SS it is 16 dB (p = 0.05), whereas at the umbo without SS it is 15 dB (p = 0.03). In the 8 kHz region, the mean magnitude of Lmfp is approximately 1 dB with the stapes SS intact and approximately 8.5 dB when it was removed (p < 0.09). There are significant physiologic advantages to placing the hydroxylapatite MFP-ORP beneath the neck of the malleus and preserving the SS.

  19. Lip Bumper Prosthesis for an Acromegaly Patient: A Clinical Report

    OpenAIRE

    Ashok, V.; Nallaswamy, Deepak; Benazir Begum, S.; Nesappan, Thiyaneswaran

    2013-01-01

    Prosthetic rehabilitation is done to regain function, speech and esthetics. This article describes the treatment for an acromegaly patient with bony defect. Two piece magnet retained hollow lip bumper prosthesis was fabricated to reduce the weight of the denture and to attain esthetics.

  20. Lip Bumper Prosthesis for an Acromegaly Patient: A Clinical Report.

    Science.gov (United States)

    Ashok, V; Nallaswamy, Deepak; Benazir Begum, S; Nesappan, Thiyaneswaran

    2014-12-01

    Prosthetic rehabilitation is done to regain function, speech and esthetics. This article describes the treatment for an acromegaly patient with bony defect. Two piece magnet retained hollow lip bumper prosthesis was fabricated to reduce the weight of the denture and to attain esthetics.

  1. Groningen temporomandibular joint prosthesis. Development and first clinical application

    NARCIS (Netherlands)

    van Loon, JP; de Bont, LGM; Stegenga, B; Spijkervet, FKL; Verkerke, GJ

    Patients with a severely degenerated temporomandibular joint (TMJ) may benefit from an alloplastic TMJ replacement. The aim of the study was to develop a safe and properly functioning TMJ prosthesis. The design was based on imitation of anterior condylar translation by an inferiorly located centre

  2. [Midterm results and revisions of the thrust plate prosthesis (TPP)].

    Science.gov (United States)

    Ishaque, B A; Wienbeck, S; Stürz, H

    2004-01-01

    Although already in use for 20 years, the concept of the metaphyseal anchored thrust plate prosthesis has not yet gained general acceptance. Clinical and radiological follow-up examinations were carried out 5 to 8 years after implantation of a TPP. We tried to answer the question if the metaphyseal anchorage of the cement-less TPP is equal to a diaphyseal anchorage of a cement-less stem prosthesis and to define the advantages of the TPP. We included 170 of the patients from our clinic with an implanted TPP in this study. Furthermore we reviewed the results of 30 revision hip arthroplasties of the TPP. The clinical examination were carried out using the Harris hip score while the radiological examinations were performed on the basis of predefined criteria. We found good clinical results. The preoperative Harris score of 48.7 increased to 93.7 at 24 months postoperatively. Radiolucencies were detected and were of varying relevance in dependence on their localization. The Kaplan-Meier survival analysis at 8 years was 90.5 %. The clinical results after changing the TPP were also good to excellent. The mean Harris hip score was 87.3. Our study suggests that in spite of a slightly higher aseptic loosening rate in comparison to the cement-less stem prosthesis, the thrust plate prosthesis proved to be worthwhile. On the basis of previous experience we assume that the TPP is a good alternative implant especially for young patients.

  3. Task-Oriented Gaming for Transfer to Prosthesis Use

    NARCIS (Netherlands)

    van Dijk, Ludger; Sluis, van der Corry K.; van Dijk, Hylke W.; Bongers, Raoul M.

    2016-01-01

    The aim of this study is to establish the effect of task-oriented video gaming on using a myoelectric prosthesis in a basic activity of daily life (ADL). Forty-one able-bodied right-handed participants were randomly assigned to one of four groups. In three of these groups the participants trained to

  4. 21 CFR 888.3230 - Finger joint polymer constrained prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Finger joint polymer constrained prosthesis. 888.3230 Section 888.3230 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN... made from either a silicone elastomer or a combination pf polypropylene and polyester material. The...

  5. Transtibial prosthesis suspension failure during skydiving freefall: a case report.

    Science.gov (United States)

    Gordon, Assaf T; Land, Rebekah M

    2009-01-01

    This report describes the unusual case of an everyday-use prosthesis suspension system failure during the freefall phase of a skydiving jump. The case individual was a 53-year-old male with a left transtibial amputation secondary to trauma. He used his everyday prosthesis, a transtibial endoskeleton with push-button, plunger-releasing, pin-locking silicon liner suction suspension and a neoprene knee suspension sleeve, for a standard recreational tandem skydive. Within seconds of exiting the plane, the suspension systems failed, resulting in the complete prosthesis floating away. Several factors may have led to suspension system failure, including an inadequate seal and material design of the knee suspension sleeve and liner, lack of auxiliary suspension mechanisms, and lack of a safety cover overlying the push-button release mechanism. This is the first report, to our knowledge, to discuss prosthetic issues specifically related to skydiving. While amputees are to be encouraged to participate in this extreme sport, special modifications to everyday components may be necessary to reduce the possibility of prosthesis failure during freefall, parachute deployment, and landing.

  6. [Medial unicompartmental knee prosthesis for patients with unicompartmental gonarthrosis

    NARCIS (Netherlands)

    Kort, N.P.; Deutman, R.; Raay, J.J. van; Horn, J.R. van

    2004-01-01

    The function and survival time of unicompartmental knee prostheses for patients with severe gonarthrosis have been improved the past few years by developments in their design, the instrumentarium and the surgical technique. A medial unicompartmental knee prosthesis may be indicated in patients with

  7. [Ear prosthesis anchored on osseointegrated implants. Experience with 9 cases].

    Science.gov (United States)

    Charles, X; Piller, P; Hemar, P; Herman, D; Kennel, P; Riedinger, A M; Conraux, C

    1995-01-01

    The use of osseointegrated titanium implants has improved the quality of auricle prosthesis fixation. Between december 1993 and july 1994, twenty two titanium fixtures have been surgically implanted in nine patients in the Ear Nose Throat department of the university hospital of Strasbourg. This method of auricle amputation repair achieves a good esthetic result with a low rate of postoperative complications.

  8. Treatment Using Functionally Fixed Prosthesis: A Case Report.

    Science.gov (United States)

    Chandra, Sumi; Singh, Ajay; Gupta, Himanshu; Chandra, Chetan

    2014-12-01

    Most dental practitioners as well as their patients prefer to have fixed rather than removable prosthesis. However, there are many clinical situations that prohibit the use of the fixed treatment modality. These clinical cases can vary from, simply not having the proper number of healthy teeth and/or implants to, the esthetically challenging cases of high smile lines and severe loss of alveolar support. The approach of using a traditional removable prosthesis in these situations has always been met with severe compromises. The functionally fixed restoration is a third modality of treatment that can solve many of the problems of the removable restoration and at the same time provide the same comfort and success of the fixed prosthesis. This restoration has a pontic assembly that is removed by the patient for periodontal maintenance. This article presents a case report which describes a technique for treatment of partially edentulous maxilla with severe loss of alveolar support using a fixed removable prosthesis/Andrew's bridge.

  9. 21 CFR 870.3450 - Vascular graft prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Vascular graft prosthesis. 870.3450 Section 870.3450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... animal origin, including human umbilical cords. (b) Classification. Class II (special controls). The...

  10. Design of a Fully-Passive Transfemoral Prosthesis Prototype

    NARCIS (Netherlands)

    Behrens, Sebastiaan Maria; Behrens, S.M.; Ünal, Ramazan; Unal, R.; Hekman, Edsko E.G.; Carloni, Raffaella; Stramigioli, Stefano; Koopman, Hubertus F.J.M.

    In this study, we present the mechanical design of a prototype of a fully-passive transfemoral prosthesis for normal walking. The conceptual working principle at the basis of the design is inspired by the power flow in human gait, with the main purpose of realizing an energy efficient device. The

  11. Design of a fully-passive transfemoral prosthesis prototype

    NARCIS (Netherlands)

    Behrens, S. M.; Unal, R.; Hekman, E. E.G.; Carloni, R.; Stramigioli, S.; Koopman, H. F.J.M.

    2011-01-01

    In this study, we present the mechanical design of a prototype of a fully-passive transfemoral prosthesis for normal walking. The conceptual working principle at the basis of the design is inspired by the power flow in human gait, with the main purpose of realizing an energy efficient device. The

  12. Soft tissue cover for the exposed knee prosthesis

    OpenAIRE

    Fayomi, O.; Patel, J. V.; Percival, N.

    1999-01-01

     This study assess the use of muscle flaps to cover exposed knee prostheses and emphasises the need for early plastic surgery consultation. In five of the six patients studied the wound was successfully covered and the knee prosthesis salvaged with a reasonable functional outcome.

  13. [Possibilities for quantitative gait analysis in evaluation of prosthesis fit].

    Science.gov (United States)

    Tscheuschner, R; Tober, H; Rosenberger, H

    1994-06-01

    Nowadays, the fitting of a lower-limb prosthesis is done mainly on an empirical basis. The main aim of the present study was to provide objective data and presentations to support the subjective data. With the aid of a cybernetic statement, the process of fitting a prosthesis to a human subject was developed as a self-optimizing control cycle. Using this systematic scheme, the walking trial was identified as the process element of this control cycle in which the fitting proper took place. Starting with this systematic scheme, the characteristics of defined changes to the system human-prosthesis during walking were measured with the aid of a specially configured gait analysis system. For the estimation of the characteristics of the measured walking trial, a three stage parameter system based initially only on the angle, velocity and acceleration curves at the knee joint was developed. On the basis of pattern recognition routines, the parameter system permits a very high level of identification of the measurements. The identification of poor fittings not covered by the pattern recognition system is not yet satisfactory. However, with the incorporation of additional gait parameters, it will be possible to further improve the description of the gait, enabling better recognition of disturbances in the human-prosthesis system.

  14. Intermanual transfer effects in below-elbow myoelectric prosthesis users

    NARCIS (Netherlands)

    de Boer, Errit; Romkema, Sietske; Cutti, Andrea G; Brouwers, Michael A H; Bongers, Raoul M; van der Sluis, Corry K

    2016-01-01

    OBJECTIVE: To determine intermanual transfer effects in patients with a below-elbow amputation using a myoelectric prosthesis, and to establish whether laterality affects these effects. DESIGN: Case-control. SETTING: A standardized setting in a rehabilitation clinic. PARTICIPANTS: A convenience

  15. [Consequences of prosthesis on quality of the radiation therapy].

    Science.gov (United States)

    Le Fèvre, C; Buffard, E; Antoni, D; Chaussemy, D; Matter-Parrat, V; Noël, G

    2016-09-01

    Dose prescription, delineation and dose calculation are clearly complicated when a patient have been operated on with insertion of prosthesis. Knowledge of the physical and material characteristics is needed to decrease incertitude of calculations. Recommendations for each step of treatments are proposed in this article allowing to optimization of the treatment safety. Copyright © 2016. Published by Elsevier SAS.

  16. 21 CFR 874.3450 - Partial ossicular replacement prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Partial ossicular replacement prosthesis. 874.3450 Section 874.3450 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... composite, absorbable gelatin material, porous polyethylene, or from a combination of these materials. (b...

  17. Root canal debridement: an online study guide.

    Science.gov (United States)

    2008-05-01

    The Editorial Board of the Journal of Endodontics has developed a literature-based study guide of topical areas related to endodontics. This study guide is intended to give the reader a focused review of the essential endodontic literature and does not cite all possible articles related to each topic. Although citing all articles would be comprehensive, it would defeat the idea of a study guide. This section will present root canal debridement including subdivisions on canal access, canal debridement, orifice enlargement and preflaring, crown-down technique, balanced force, nickel titanium and other shape memory alloys, rotary engine-driven techniques, endodontic instruments, irrigation, electronic apex locators, sonics/ultrasonics, smear layer, and intracanal medicaments.

  18. Evolvable synthetic neural system

    Science.gov (United States)

    Curtis, Steven A. (Inventor)

    2009-01-01

    An evolvable synthetic neural system includes an evolvable neural interface operably coupled to at least one neural basis function. Each neural basis function includes an evolvable neural interface operably coupled to a heuristic neural system to perform high-level functions and an autonomic neural system to perform low-level functions. In some embodiments, the evolvable synthetic neural system is operably coupled to one or more evolvable synthetic neural systems in a hierarchy.

  19. Inequalities of dental prosthesis use under universal healthcare insurance.

    Science.gov (United States)

    Matsuyama, Yusuke; Aida, Jun; Takeuchi, Kenji; Tsakos, Georgios; Watt, Richard G; Kondo, Katsunori; Osaka, Ken

    2014-04-01

    Social inequalities in oral health exist in various countries. In Japan, a country with universal healthcare insurance policy, people can receive medical and dental care and pay only 10-30% of the total cost of treatment. Additionally, very poor Japanese can receive care without any charge, by the benefit of public assistance. These policies are considered to affect oral health inequalities. This study examined the association between using a dental prosthesis and household income among older Japanese people. Self-administered questionnaires were mailed to subjects as part of the Japan Gerontological Evaluation Study (JAGES) project in 2010. Of the 8576 people aged 65 years or more living in Iwanuma, Japan, 5058 responded. We used 4001 respondents with no missing values. We stratified into two groups by having 20 teeth or not. Then, cross-tabulation, univariate logistic regression, and multivariate logistic regression were conducted for these two groups. The covariates are sex, age, education, and size of household. Of the all respondents included in the analyses, poorer respondents tended to have lower proportions with 20 or more teeth, and 54.6% respondents used dental prostheses. In the respondents with 19 or fewer teeth, higher-income group tended to show significantly higher dental prosthesis use. But the poorest income group showed high prevalence of dental prosthesis use as same as highest income group. Multiple logistic regression among respondents with 19 or fewer teeth showed that after adjustment for sex, age, education, and size of household, compared with the respondents with annual incomes of US$ dental prosthesis (OR = 0.48 [95% CI = 0.28-0.83], 0.56 [95% CI = 0.33-0.95], respectively). The other respondents did not show significant differences. Although universal healthcare insurance covered dental prostheses, a social gradient in dental prosthesis use was still observed. Low-income respondents tended to not use dental prosthesis, but the

  20. Effect of two contemporary root canal sealers on root canal dentin microhardness.

    Science.gov (United States)

    Khallaf, Maram E

    2017-01-01

    Successful root canal treatment depends on proper cleaning, disinfecting and shaping of the root canal space. Pulpless teeth have lower dentin microhardness value compared to that of vital teeth. A material which can cause change in dentin composition may affect the microhardness. Thus the aim of this study was to evaluate and compare the effect of two root canal sealers on dentin microhardness. Forty two single rooted teeth were selected and divided into 3 equal groups; Apexit, iRootSP and control groups (n=14) Each group was then divided into 2 subgroups according to the post evaluation period; 1 week and 2 months (n=7). Root canal procedure was done in the experimental groups and obturation was made using either; Apexit, iRootSP or left unprepared and unobturated in the control group. Roots were sectioned transversely into cervical, middle and apical segments. The three sections of each root were mounted in a plastic chuck with acrylic resin. The coronal dentin surfaces of the root segments werepolished. Microhardness of each section was measured at 500 µm and 1000 µm from the canal lumen. Four way-ANOVA revealed that different tested sealer materials, canal third, measuring distance from the pulp and time as independent variables had statistically non significant effect on mean microhardness values (VHN) at p≤0.001. Among iRootSP groups there was a statistically significant difference between iRoot SP at coronal root portion (87.79±17.83) and iRoot SP at apical root portion (76.26±9.33) groups where (p=0.01). IRoot SP at coronal canal third had higher statistically significant mean microhardness value (87.79±17.83) compared to Apexit at coronal third (73.61±13.47) where (p=0.01). Root canal sealers do not affect dentin microhardness. Key words:Root canal, dentin, sealers, microhardness, bioceramic.

  1. Cranioplasty prosthesis manufacturing based on reverse engineering technology

    Science.gov (United States)

    Chrzan, Robert; Urbanik, Andrzej; Karbowski, Krzysztof; Moskała, Marek; Polak, Jarosław; Pyrich, Marek

    2012-01-01

    Summary Background Most patients with large focal skull bone loss after craniectomy are referred for cranioplasty. Reverse engineering is a technology which creates a computer-aided design (CAD) model of a real structure. Rapid prototyping is a technology which produces physical objects from virtual CAD models. The aim of this study was to assess the clinical usefulness of these technologies in cranioplasty prosthesis manufacturing. Material/Methods CT was performed on 19 patients with focal skull bone loss after craniectomy, using a dedicated protocol. A material model of skull deficit was produced using computer numerical control (CNC) milling, and individually pre-operatively adjusted polypropylene-polyester prosthesis was prepared. In a control group of 20 patients a prosthesis was manually adjusted to each patient by a neurosurgeon during surgery, without using CT-based reverse engineering/rapid prototyping. In each case, the prosthesis was implanted into the patient. The mean operating times in both groups were compared. Results In the group of patients with reverse engineering/rapid prototyping-based cranioplasty, the mean operating time was shorter (120.3 min) compared to that in the control group (136.5 min). The neurosurgeons found the new technology particularly useful in more complicated bone deficits with different curvatures in various planes. Conclusions Reverse engineering and rapid prototyping may reduce the time needed for cranioplasty neurosurgery and improve the prosthesis fitting. Such technologies may utilize data obtained by commonly used spiral CT scanners. The manufacturing of individually adjusted prostheses should be commonly used in patients planned for cranioplasty with synthetic material. PMID:22207125

  2. Custom-made silicone hand prosthesis: A case study.

    Science.gov (United States)

    Nayak, S; Lenka, P K; Equebal, A; Biswas, A

    2016-09-01

    Up to now, a cosmetic glove was the most common method for managing transmetacarpal (TMC) and carpometacarpal (CMC) amputations, but it is devoid of markings and body color. At this amputation level, it is very difficult to fit a functional prosthesis because of the short available length, unsightly shape, grafted skin, contracture and lack of functional prosthetic options. A 30-year-old male came to our clinic with amputation at the 1st to 4th carpometacarpal level and a 5th metacarpal that was projected laterally and fused with the carpal bone. The stump had grafted skin, redness, and an unhealed suture line. He complained of pain projected over the metacarpal and suture area. The clinical team members decided to fabricate a custom-made silicone hand prosthesis to accommodate the stump, protect the grafted skin, improve the hand's appearance and provide some passive function. The custom silicone hand prosthesis was fabricated with modified flexible wires to provide passive interphalangeal movement. Basic training, care and maintenance instructions for the prosthesis were given to the patient. The silicone hand prosthesis was able to restore the appearance of the lost digits and provide some passive function. His pain (VAS score) was reduced. Improvement in activities of daily living was found in the DASH questionnaire and Jebsen-Taylor Hand Function test. A silicone glove is a good option for more distal amputations, as it can accommodate any deformity, protect the skin, enhance the appearance and provide functional assistance. This case study provides a simple method to get passively movable fingers after proximal hand amputation. Copyright © 2016. Published by Elsevier Masson SAS.

  3. Prosthesis for open pleurostomy (POP: management for chronic empyemas

    Directory of Open Access Journals (Sweden)

    Luiz Tarcísio Brito Filomeno

    2009-03-01

    Full Text Available OBJECTIVES: We developed a prosthesis for open pleurostomy cases where pulmonary decortication is not indicated, or where post-pneumonectomy space infection occurs. The open pleural window procedure not only creates a large hole in the chest wall that is shocking to patients, also results in a permanent deformation of the thorax. prosthesis for open pleurostomy is a self-retained silicone tube that requires the removal of 3 cm of one rib for insertion, and acts as a mature conventional open pleural window. Herein, we report our 13-year experience with this device in the management of different kinds of pleural empyema. METHODS: Forty-four consecutive patients with chronic empyema were treated. The etiology of empyema was diverse: pneumonia, 20; lung resections, 12 (pneumonectomies, 7; lobectomies, 4; non-anatomical, 1; mixed-tuberculous, 6; and mixed-malignant pleural effusion, 6. After debridment of both pleural surfaces, the prosthesis for open pleurostomy was inserted and attached to a small recipient plastic bag. RESULTS: Infection control was achieved in 20/20 (100% of the parapneumonic empyemas, in 3/4 (75% of post-lobectomies, in 6/7 (85% of post-pneumectomies, in 6/6 (100% of mixed-tuberculous cases, and in 4/6 (83% of mixed-malignant cases. Lung re-expansion was also successful in 93%, 75%, 33%, and 40% of the groups, respectively CONCLUSIONS: Prosthesis for open pleurostomy insertion is a minimally invasive procedure that can be as effective as conventional open pleural window for management of chronic empyemas. Thus, we propose that the use of prosthesis for open pleurostomy should replace the conventional method.

  4. Prosthesis for open pleurostomy (POP): management for chronic empyemas.

    Science.gov (United States)

    Filomeno, Luiz Tarcísio Brito; Campos, José Ribas Milanez de; Machuca, Tiago Noguchi; das Neves-Pereira, João Carlos; Terra, Ricardo Mingarini

    2009-01-01

    We developed a prosthesis for open pleurostomy cases where pulmonary decortication is not indicated, or where post-pneumonectomy space infection occurs. The open pleural window procedure not only creates a large hole in the chest wall that is shocking to patients, also results in a permanent deformation of the thorax. prosthesis for open pleurostomy is a self-retained silicone tube that requires the removal of 3 cm of one rib for insertion, and acts as a mature conventional open pleural window. Herein, we report our 13-year experience with this device in the management of different kinds of pleural empyema. Forty-four consecutive patients with chronic empyema were treated. The etiology of empyema was diverse: pneumonia, 20; lung resections, 12 (pneumonectomies, 7; lobectomies, 4; non-anatomical, 1); mixed-tuberculous, 6; and mixed-malignant pleural effusion, 6. After debridement of both pleural surfaces, the prosthesis for open pleurostomy was inserted and attached to a small recipient plastic bag. Infection control was achieved in 20/20 (100%) of the parapneumonic empyemas, in 3/4 (75%) of post-lobectomies, in 6/7 (85%) of post-pneumonectomies, in 6/6 (100%) of mixed-tuberculous cases, and in 4/6 (83%) of mixed-malignant cases. Lung re-expansion was also successful in 93%, 75%, 33%, and 40% of the groups, respectively Prosthesis for open pleurostomy insertion is a minimally invasive procedure that can be as effective as conventional open pleural window for management of chronic empyemas. Thus, we propose that the use of prosthesis for open pleurostomy should replace the conventional method.

  5. Cochlear implant outcomes in patients with superior canal dehiscence

    NARCIS (Netherlands)

    Puram, Sidharth V.; Roberts, Daniel S.; Niesten, Marlien E F|info:eu-repo/dai/nl/377125202; Dilger, Amanda E.; Lee, Daniel J.

    2015-01-01

    Objective: To determine whether adult cochlear implant (CI) users with superior canal dehiscence syndrome (SCDS) or asymptomatic superior semicircular canal dehiscence (SCD) have different surgical, vestibular, and audiologic outcomes when compared to CI users with normal temporal bone anatomy.

  6. Surgical endodontic management of infected lateral canals of maxillary incisors.

    Science.gov (United States)

    Jang, Ji-Hyun; Lee, Jung-Min; Yi, Jin-Kyu; Choi, Sung-Baik; Park, Sang-Hyuk

    2015-02-01

    This case report presents surgical endodontic management outcomes of maxillary incisors that were infected via the lateral canals. Two cases are presented in which endodontically-treated maxillary central incisors had sustained lateral canal infections. A surgical endodontic treatment was performed on both teeth. Flap elevation revealed vertical bone destruction along the root surface and infected lateral canals, and microscopy revealed that the lateral canals were the origin of the lesions. After the infected lateral canals were surgically managed, both teeth were asymptomatic and labial fistulas were resolved. There were no clinical or radiographic signs of surgical endodontic management failure at follow-up visits. This case report highlights the clinical significance and surgical endodontic management of infected lateral canal of maxillary incisor. It is important to be aware of root canal anatomy variability in maxillary incisors. Maxillary central incisors infected via the lateral canal can be successfully managed by surgical endodontic treatment.

  7. Intradermal melanocytic nevus of the external auditory canal.

    Science.gov (United States)

    Alves, Renato V; Brandão, Fabiano H; Aquino, José E P; Carvalho, Maria R M S; Giancoli, Suzana M; Younes, Eduado A P

    2005-01-01

    Intradermal nevi are common benign pigmented skin tumors. Their occurrence within the external auditory canal is uncommon. The clinical and pathologic features of an intradermal nevus arising within the external auditory canal are presented, and the literature reviewed.

  8. Radiographic versus electronic root canal working length determination

    Directory of Open Access Journals (Sweden)

    Lumnije Kqiku

    2011-01-01

    Conclusions: The present ex vivo study showed that electronic root canal working length determination is not superior to radiographic methods. Both methods provided a good performance in determining the root canal working length.

  9. Report from the Panama Canal Stakeholder Working Group.

    Science.gov (United States)

    2013-03-01

    This project assists the Texas Department of Transportation (TxDOT) in assessing the potential impacts of the Panama Canal expansion on Texas ports and the landside transportation system. TxDOT formed a Panama Canal Stakeholder Working Group (PCSWG) ...

  10. [Medico-ethical considerations when indicating single-tooth fixed prosthesis, multi-teeth fixed prosthesis, and oral implants].

    Science.gov (United States)

    Witter, D J; Brands, W G; Hoefnagel, R A; Creugers, N H J

    2012-12-01

    The question whether a patient needs extensive and invasive treatment, such as single-tooth fixed prosthesis, multi-teeth fixed prosthesis or oral implants, can be established only in a dialogue with mutual respect between the healthcare provider and the patient. With respect to this question, the following principles have to be considered: the patient's autonomy, beneficence, non-maleficence, and justice. These principles are reflected in legislation and are implicitly applied in complaint and disciplinary jurisdiction. When the autonomy of a patient is not sufficiently respected by a healthcare provider, a patient complaint might be the result, such as a complaint of impertinent treatment, lack of informed consent, or poor patient documentation. If beneficence or non-maleficence principles are violated, an intrinsic treatment complaint might be the result, such as a complaint of inadequate treatment planning, often based on inadequate examination, and complications or untimely failure of single-tooth fixed prosthesis, multi-teeth fixed prosthesis or oral implants. Respecting the previously mentioned principles promotes appropriate healthcare to the patient also in complex care with other healthcare providers.

  11. Attachment-retained gingival prosthesis for implant-supported fixed dental prosthesis in the maxilla: a clinical report.

    Science.gov (United States)

    Aparecida de Mattias Sartori, Ivete; Uhlendorf, Yuri; Padovan, Luiz Eduardo Marques; Junior, Paulo Domingos Ribeiro; Melo, Ana Cláudia Moreira; Tiossi, Rodrigo

    2014-12-01

    The rehabilitation of edentulous maxillae is a complex procedure due to the involvement of esthetic and functional requirements. A trial maxillary denture can be used to identify the need for adequate upper lip support when replacing removable complete dentures by implant-fixed dental prostheses. This clinical report describes the outcome of the rehabilitation of an edentulous atrophic maxilla with unfavorable maxillomandibular relationship and deficient upper lip support. A trial denture was fabricated and used to diagnose the need for a prosthesis capable of restoring the upper lip support. The reduced upper lip support was also confirmed by a lateral cephalogram. The patient was rehabilitated by an implant-fixed dental prosthesis associated with an attachment-retained gingival prosthesis. The case presented shows that when loss of upper lip support is detected and the patient does not wish to undergo further surgical reconstruction procedure, the retention of a gingival prosthesis using a ball attachment is a satisfactory treatment option. © 2014 by the American College of Prosthodontists.

  12. Viscoelastic assessment of anal canal function using acoustic reflectometry

    DEFF Research Database (Denmark)

    Mitchell, Peter J; Klarskov, Niels; Telford, Karen J

    2012-01-01

    Anal acoustic reflectometry is a new reproducible technique that allows a viscoelastic assessment of anal canal function. Five new variables reflecting anal canal function are measured: the opening and closing pressure, opening and closing elastance, and hysteresis.......Anal acoustic reflectometry is a new reproducible technique that allows a viscoelastic assessment of anal canal function. Five new variables reflecting anal canal function are measured: the opening and closing pressure, opening and closing elastance, and hysteresis....

  13. 75 FR 32275 - Regulated Navigation Area; Gulf Intracoastal Waterway, Inner Harbor Navigation Canal, Harvey...

    Science.gov (United States)

    2010-06-08

    ..., Inner Harbor Navigation Canal, Harvey Canal, Algiers Canal, New Orleans, LA AGENCY: Coast Guard, DHS...), Harvey Canal, and Algiers Canal during severe hurricane conditions. Vessels will not be permitted to stay... communities within the IHNC, Harvey, and Algiers Canals from potential hazards associated with vessels being...

  14. 21 CFR 872.3820 - Root canal filling resin.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Root canal filling resin. 872.3820 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3820 Root canal filling resin. (a) Identification. A root canal filling resin is a device composed of material, such as methylmethacrylate, intended...

  15. 5 CFR 550.714 - Panama Canal Commission employees.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Panama Canal Commission employees. 550... PAY ADMINISTRATION (GENERAL) Severance Pay § 550.714 Panama Canal Commission employees. (a) Notwithstanding any other provisions of this subpart, an employee separated from employment with the Panama Canal...

  16. Maxillary First Premolar with Three Root Canals: A Case Report ...

    African Journals Online (AJOL)

    ... the tooth is needed to ensure a proper endodontic treatment. This article reports a rare finding of three canals in a maxillary first premolar with non well defined root outline radiographically during an elective root canal treatment. Keywords: Maxillary First Premolar, Endodontic Treatment, Elective, Root Canal Morphology ...

  17. Lumbar Vertebral Canal Diameters in Adult Ugandan Skeletons ...

    African Journals Online (AJOL)

    Background: Normal values of lumbar vertebral canal diameters are useful in facilitating diagnosis of lumbar vertebral canal stenosis. Various studies have established variation on values between different populations, gender, age, and ethnic groups. Objectives: To determine the lumbar vertebral canal diameters in adult ...

  18. The crazy project – Canal Istanbul

    Directory of Open Access Journals (Sweden)

    Seda Kundak

    2011-10-01

    Full Text Available It was late April 2011 when “the Crazy Project - Canal Istanbul” was proposed by the Prime Minister of Turkey, during his election campaign.  Although the idea of an artificial canal is not new, since it is initiated without any consensus between the people and institutions in Istanbul, the project immediately set a large number of debates. These vary from the legitimacy of decentralization of governance, to potential impacts of the canal on international politics, economy, environment and urban life.  Regarding past infrastructure projects in Istanbul, such large scale investments have caused extensive acceleration in construction sector in one hand and social and economic shifts on the other.  In this paper, the Canal Istanbul Project is evaluated according to basic motivations and claims of the PM, multi-perspective view through challenges and limitation that the project is likely to face with and speculations on implementation approach. The final discussion on the project is based on benefits/losses of Istanbul once the project will be implemented.

  19. Cancer of the external auditory canal

    DEFF Research Database (Denmark)

    Nyrop, Mette; Grøntved, Aksel

    2002-01-01

    OBJECTIVE: To evaluate the outcome of surgery for cancer of the external auditory canal and relate this to the Pittsburgh staging system used both on squamous cell carcinoma and non-squamous cell carcinoma. DESIGN: Retrospective case series of all patients who had surgery between 1979 and 2000. M...

  20. Infrared typmanic tempature and ear canal morphology

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2006-01-01

    Several publications indicate that the infrared tympanic temperature (IRTT) underestimates the core temperature of the body when the ear canal is long, curvy and narrow. In order to quantify these observations, a study was performed in 10 subjects. The IRTT was determined and compared to the

  1. The Panama Canal and Social Justice.

    Science.gov (United States)

    Wilde, Margaret D., Ed.

    The booklet, designed to explore the issues of international justice in the context of the Gospel, reviews relations between the United States and Panama. It includes background materials and a study guide for parish leaders and other educators. The central question pertaining to the Panama Canal concerns the rights of the United States according…

  2. Residuos de antimicrobianos en canales de vacas

    National Research Council Canada - National Science Library

    GESCHE, E; EMILFORK, C

    1998-01-01

    Con la finalidad de conocer la presencia de residuos de antibióticos y sulfamidas en animales de abasto, se analizaron las canales de 300 vacas faenadas en una Planta Faenadora de Carnes de la X Región de Chile...

  3. A biomechanical comparison of the thrust plate prosthesis and a stemmed prosthesis.

    Science.gov (United States)

    Karatosun, Vasfi; Unver, Bayram; Gultekin, Alper; Gunal, Izge

    2011-01-01

    The thrust plate prosthesis (TPP) is a neck preserving femoral component in total hip arthroplasty (THA) which may facilitate more precise biomechanical reconstruction of the hip. The purpose of this study was to compare the biomechanical results of the TPP with a conventional THA. We compared anteroposterior radiographs from 60 patients who had undergone cementless THA, with 44 who had undergone a TPP. We measured the hip centre of rotation, femoral offset, limb length, and neck-shaft angle. The horizontal hip centre of rotation, vertical femoral offset, limb length and neck-shaft angle measurements showed a significant difference (phip centre of rotation and horizontal femoral offset measurements were different only in TPP patients when compared with preoperative values (phip centre of rotation displayed a significant difference (p=0.003) in favor of the THA. Therefore, we found no difference in restoring the biomechanics of the hip using the two methods, and only the horizontal hip centre of rotation restoration favoured the THA. Our findings indicate that the TPP does not produce more accurate restoration of leg length or offset. Reproduction of hip mechanics after TPP may not be as good as has been suggested.

  4. Semiconductor laser irradiation improves root canal sealing during routine root canal therapy

    OpenAIRE

    Su, Dandan; Hu, Xingxue; Wang, Dashan; Cui, Ting; Yao, RuYong; Sun, Huibin

    2017-01-01

    Objective To evaluate the effect of semiconductor laser irradiation on root canal sealing after routine root canal therapy (RCT). Methods Sixty freshly extracted single-rooted human teeth were randomly divided into six groups (n = 10). The anatomic crowns were sectioned at the cementoenamel junction and the remaining roots were prepared endodontically with conventional RCT methods. Groups A and B were irradiated with semiconductor laser at 1W for 20 seconds; Groups C and D were ultrasonically...

  5. Sensory feedback prosthesis reduces phantom limb pain: proof of a principle.

    Science.gov (United States)

    Dietrich, Caroline; Walter-Walsh, Katrin; Preissler, Sandra; Hofmann, Gunther O; Witte, Otto W; Miltner, Wolfgang H R; Weiss, Thomas

    2012-01-24

    Constrained functionality and phantom limb pain (PLP) are major concerns for forearm amputees. Neuroscientific investigations of PLP suggest that behaviorally relevant stimulation of the stump can decrease PLP. Furthermore the prosthesis user could use feedback information of the prosthesis hand for optimizing prosthesis motor control when handling soft and fragile objects. Somatosensory feedback information from a prosthetic hand may therefore help to improve prosthesis functionality and reduce phantom limb pain. We wanted to find out whether a two weeks training on a hand prosthesis that provides somatosensory feedback may help to improve prosthesis functionality and reduce phantom limb pain. Eight forearm amputees with phantom limb pain were trained for two weeks to use a hand prosthesis with somatosensory feedback on grip strength. The current study demonstrates a significant increase of functionality of the prosthesis in everyday tasks. Furthermore, the study shows that usage of a prosthesis that provides somatosensory feedback on the grip strength is effective to reduce phantom limb pain. A prosthesis with a feedback function appears to be a promising therapeutic tool to reduce phantom limb pain and to increase functionality in everyday tasks. Future studies should further investigate the scope of application of that principle. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  6. A new and simple method of fabrication of tracheostomal prosthesis

    Directory of Open Access Journals (Sweden)

    N Vidya Sankari

    2015-01-01

    Full Text Available Patients with a tracheostomy stoma experience compromised speech and function due to the associated changes in airflow patterns. Rehabilitation of a patient with tracheal stoma is a highly challenging task. The main objective is to design an inexpensive, easily fabricated stomal prosthesis for postlaryngectomy patients who require prolonged tracheotomy. This clinical case report describes a 29-year-old male patient who underwent for tracheotomy 3 months before for respiratory distress following a suicidal attempt. Hence tracheotomy was done, and the patient has been with the tracheostomal tube since surgery for the past 3 months. Laryngoscopy examination reported as restricted bilateral vocal cord movements, and the cords were in the adducted position with minimal glottic chink. No history of difficulty in swallowing. On examination, no scar or ulceration is seen around the stoma. The skin around the stoma is healthy. The patient was referred to the oral and maxillofacial Prosthodontics Department from the Department of ENT. The patient′s old tracheostomal tube was used as the dimensions of the custom made tracheal prosthesis without making a functional impression of the mature stoma. A tracheal button was made with 2 mm polyethylene urethane sheet to maintain the airway patency of the mature stoma. Width and length of the old tracheostomal tube were measured and customized with polyurethane sheet by directly flaming over heat. The finished product was thin, flexible, maintains enhanced tear strength, require no tapes or adhesives and less technique sensitive. These properties of the prosthesis make more advantageous than the commercially available tracheal buttons. The result in this patient was excellent with no postoperative complications. An innovative approach for fabrication of tracheostomal prosthesis was discussed to increase its successful use in tracheostomal patients. The patient′s old tracheostomal tube was used as the dimensions

  7. MR determination of neonatal spinal canal depth

    Energy Technology Data Exchange (ETDEWEB)

    Arthurs, Owen, E-mail: owenarthurs@uk2.net [Centre for Cardiovascular MR, Great Ormond Street Hospital for Children, London WC1N 3JH (United Kingdom); Thayyil, Sudhin, E-mail: s.thayyil@ucl.ac.uk [Academic Neonatology, Institute for Women' s Health, London WC1E 6AU (United Kingdom); Wade, Angie, E-mail: a.wade@ucl.ac.uk [Centre for Paediatric Epidemiology and Biostatistics, UCL Institute of Child Health, London (United Kingdom); Chong, W.K., E-mail: Kling.Chong@gosh.nhs.uk [Paediatric Neuroradiology, Great Ormond Street Hospital for Children, London (United Kingdom); Sebire, Neil J., E-mail: Neil.Sebire@gosh.nhs.uk [Histopathology, Great Ormond Street Hospital for Children, London WC1E 6AU (United Kingdom); Taylor, Andrew M., E-mail: a.taylor76@ucl.ac.uk [Centre for Cardiovascular MR, Cardiorespiratory Unit, Great Ormond Street Hospital for Children and UCL Institute of Cardiovascular Science, London WC1E 6AU (United Kingdom)

    2012-08-15

    Objectives: Lumbar punctures (LPs) are frequently performed in neonates and often result in traumatic haemorrhagic taps. Knowledge of the distance from the skin to the middle of the spinal canal (mid-spinal canal depth - MSCD) may reduce the incidence of traumatic taps, but there is little data in extremely premature or low birth weight neonates. Here, we determined the spinal canal depth at post-mortem in perinatal deaths using magnetic resonance imaging (MRI). Patients and methods: Spinal canal depth was measured in 78 post-mortem foetuses and perinatal cases (mean gestation 26 weeks; mean weight 1.04 kg) at the L3/L4 inter-vertebral space at post-mortem MRI. Both anterior (ASCD) and posterior (PSCD) spinal canal depth were measured; MSCD was calculated and modelled against weight and gestational age. Results: ASCD and PSCD (mm) correlated significantly with weight and gestational age (all r > 0.8). A simple linear model MSCD (mm) = 3 Multiplication-Sign Weight (kg) + 5 was the best fit, identifying an SCD value within the correct range for 87.2% (68/78) (95% CI (78.0, 92.9%)) cases. Gestational age did not add significantly to the predictive value of the model. Conclusion: There is a significant correlation between MSCD and body weight at post-mortem MRI in foetuses and perinatal deaths. If this association holds in preterm neonates, use of the formula MSCD (mm) = 3 Multiplication-Sign Weight (kg) + 5 could result in fewer traumatic LPs in this population.

  8. Cervical spinal canal narrowing in idiopathic syringomyelia

    Energy Technology Data Exchange (ETDEWEB)

    Struck, Aaron F. [Massachusetts General Hospital, Department of Neurology, Boston, MA (United States); Carr, Carrie M. [Mayo Clinic, Department of Radiology, Rochester, MN (United States); Shah, Vinil [University of California San Francisco, Department of Radiology, San Francisco, CA (United States); Hesselink, John R. [University of California San Diego, Department of Radiology, San Diego, CA (United States); Haughton, Victor M. [University of Wisconsin, Department of Radiology, Madison, WI (United States)

    2016-08-15

    The cervical spine in Chiari I patient with syringomyelia has significantly different anteroposterior diameters than it does in Chiari I patients without syringomyelia. We tested the hypothesis that patients with idiopathic syringomyelia (IS) also have abnormal cervical spinal canal diameters. The finding in both groups may relate to the pathogenesis of syringomyelia. Local institutional review boards approved this retrospective study. Patients with IS were compared to age-matched controls with normal sagittal spine MR. All subjects had T1-weighted spin-echo (500/20) and T2-weighted fast spin-echo (2000/90) sagittal cervical spine images at 1.5 T. Readers blinded to demographic data and study hypothesis measured anteroposterior diameters at each cervical level. The spinal canal diameters were compared with a Mann-Whitney U test. The overall difference was assessed with a Friedman test. Seventeen subjects were read by two reviewers to assess inter-rater reliability. Fifty IS patients with 50 age-matched controls were studied. IS subjects had one or more syrinxes varying from 1 to 19 spinal segments. Spinal canal diameters narrowed from C1 to C3 and then enlarged from C5 to C7 in both groups. Diameters from C2 to C4 were narrower in the IS group (p < 0.005) than in controls. The ratio of the C3 to the C7 diameters was also smaller (p = 0.004) in IS than controls. Collectively, the spinal canal diameters in the IS were significantly different from controls (Friedman test p < 0.0001). Patients with IS have abnormally narrow upper and mid cervical spinal canal diameters and greater positive tapering between C3 and C7. (orig.)

  9. Cervical spinal canal narrowing in idiopathic syringomyelia.

    Science.gov (United States)

    Struck, Aaron F; Carr, Carrie M; Shah, Vinil; Hesselink, John R; Haughton, Victor M

    2016-08-01

    The cervical spine in Chiari I patient with syringomyelia has significantly different anteroposterior diameters than it does in Chiari I patients without syringomyelia. We tested the hypothesis that patients with idiopathic syringomyelia (IS) also have abnormal cervical spinal canal diameters. The finding in both groups may relate to the pathogenesis of syringomyelia. Local institutional review boards approved this retrospective study. Patients with IS were compared to age-matched controls with normal sagittal spine MR. All subjects had T1-weighted spin-echo (500/20) and T2-weighted fast spin-echo (2000/90) sagittal cervical spine images at 1.5 T. Readers blinded to demographic data and study hypothesis measured anteroposterior diameters at each cervical level. The spinal canal diameters were compared with a Mann-Whitney U test. The overall difference was assessed with a Friedman test. Seventeen subjects were read by two reviewers to assess inter-rater reliability. Fifty IS patients with 50 age-matched controls were studied. IS subjects had one or more syrinxes varying from 1 to 19 spinal segments. Spinal canal diameters narrowed from C1 to C3 and then enlarged from C5 to C7 in both groups. Diameters from C2 to C4 were narrower in the IS group (p < 0.005) than in controls. The ratio of the C3 to the C7 diameters was also smaller (p = 0.004) in IS than controls. Collectively, the spinal canal diameters in the IS were significantly different from controls (Friedman test p < 0.0001). Patients with IS have abnormally narrow upper and mid cervical spinal canal diameters and greater positive tapering between C3 and C7.

  10. MAXILLARY FIRST PREMOLARS WITH THREE ROOT CANALS: TWO CASE REPORTS

    Directory of Open Access Journals (Sweden)

    Zeliha UĞUR

    2017-10-01

    Full Text Available It is very important that the dentists have sufficient information about possible variations in the expected root canal configurations in order to achieve success in endodontic treatment. In addition to having adequate knowledge on the variations of the root canal anatomy, periapical radiographs from different angles, careful examination of the pulp chamber floor, and use of dental operation microscope during the procedure are also important factors that contribute to the diagnosis of the additional roots and canals. The aims of this article are to present the diagnostic approach and root canal treatments of two maxillary first premolar teeth with three canals in two patients.

  11. Current and Future Management of Bilateral Loss of Vestibular Sensation – An update on the Johns Hopkins Multichannel Vestibular Prosthesis Project

    Science.gov (United States)

    Della Santina, Charles C.; Migliaccio, Americo A.; Hayden, Russell; Melvin, Thuy-Anh; Fridman, Gene Y.; Chiang, Bryce; Davidovics, Natan S.; Dai, Chenkai; Carey, John P.; Minor, Lloyd B.; Anderson, Iee-Ching; Park, HongJu; Lyford-Pike, Sofia; Tang, Shan

    2012-01-01

    Bilateral loss of vestibular sensation can disable individuals whose vestibular hair cells are injured by ototoxic medications, infection, Ménière’s disease or other insults to the labyrinth including surgical trauma during cochlear implantation. Without input to vestibulo-ocular and vestibulo-spinal reflexes that normally stabilize the eyes and body, affected patients suffer blurred vision during head movement, postural instability, and chronic disequilibrium. While individuals with some residual sensation often compensate for their loss through rehabilitation exercises, those who fail to do so are left with no adequate treatment options. An implantable neuroelectronic vestibular prosthesis that emulates the normal labyrinth by sensing head movement and modulating activity on appropriate branches of the vestibular nerve could significantly improve quality of life for these otherwise chronically dizzy patients. This brief review describes the impact and current management of bilateral loss of vestibular sensation, animal studies supporting the feasibility of prosthetic vestibular stimulation, and a vestibular prosthesis designed to restore sensation of head rotation in all directions. Similar to a cochlear implant in concept and size, the Johns Hopkins Multichannel Vestibular Prosthesis (MVP) includes miniature gyroscopes to sense head rotation, a microcontroller to process inputs and control stimulus timing, and current sources switched between pairs of electrodes implanted within the vestibular labyrinth. In rodents and rhesus monkeys rendered bilaterally vestibular-deficient via treatment with gentamicin and/or plugging of semicircular canals, the MVP partially restores the vestibulo-ocular reflex for head rotations about any axis of rotation in 3-dimensional space. Our efforts now focus on addressing issues prerequisite to human implantation, including refinement of electrode designs and surgical technique to enhance stimulus selectivity and preserve

  12. A comparative analysis of static balance between patients with lumbar spinal canal stenosis and asymptomatic participants.

    Science.gov (United States)

    Truszczyńska, Aleksandra; Drzał-Grabiec, Justyna; Trzaskoma, Zbigniew; Rąpała, Kazimierz; Tarnowski, Adam; Górniak, Krystyna

    2014-01-01

    The aim of this study was to assess static balance in patients with lumbar spinal canal stenosis who qualified for surgical decompression of associated neural structures and compare them with asymptomatic participants. This case-controlled study evaluated a sample of 50 patients with spinal canal stenosis (stenosis group) and 48 participants with no history of clinical symptoms of back pain. Static balance was assessed by conducting quantitative analysis of balance reaction parameters in quiet standing with the eyes closed. Higher values were observed in total length of center of pressure (COP) path, length of COP path in the anterior-posterior plane, mean amplitude of COP projection in the anterior-posterior plane, maximal amplitude between the 2 most distant points in the anterior-posterior plane, mean COP velocity, and sway area marked by the moving COP in the stenosis group compared with the asymptomatic group. This study showed statistically significant differences in static balance parameters between patients with spinal canal stenosis compared with the asymptomatic group. Copyright © 2014 National University of Health Sciences. Published by Elsevier Inc. All rights reserved.

  13. A new system for classifying tooth, root and canal anomalies.

    Science.gov (United States)

    Ahmed, H M A; Dummer, P M H

    2017-10-12

    Understanding the normal anatomical features as well as the more unusual developmental anomalies of teeth, roots and root canals is essential for successful root canal treatment. In addition to various types of root canal configuration and accessory canal morphology, a wide range of developmental tooth, root and canal anomalies exists, including C-shaped canals, dens invaginatus, taurodontism, root fusion, dilacerations and palato-gingival grooves. There is a direct association between developmental anomalies and pulp and periradicular diseases that usually require a multidisciplinary treatment approach to achieve a successful outcome. A number of classifications have categorized tooth, root and canal anomalies; however, several important details are often missed making the classifications less than ideal and potentially confusing. Recently, a new coding system for classifying root, root canal and accessory canal morphology has been introduced. The purpose of this article is to introduce a new system for classifying tooth, root and canal anomalies for use in research, clinical practice and training, which can serve as complementary codes to the recently described system for classifying root, as well as main and accessory canal morphology. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  14. [Measurements of semicircular canal space direction with MRI].

    Science.gov (United States)

    Yang, Xiaokai; Wu, Shuzhi; Ye, Hua

    2015-10-01

    Measure the space direction of semicircular canals to provide the anatomical basis for the diagnosis and treatment of BPPV. We calculated angles among semicircular canals of 24 patients using MRI scaning with 3D-CISS sequence. The angle between the left and right posterior semicircular canals was 106.61 degress ± 8.58 degrees, so the angle among the posterior semicircular canals and sagittal head plane was 53.31 degrees ± 4.29 degrees. Pairs of contralateral synergistic canal planes were not parallel, forming 171.67 degrees ± 4.36 degrees between the left and right horizontal semicircular canal planes, 154.37 degrees ± 10.87 degrees between the left posterior and right anterior semicircular canal planes and 156.84 degrees ± 9.34 degrees between the right posterior and left anterior semicircular canal planes. Our measurement of the angles among semicircular canals coincided with those of previous reports. The angles between contralateral synergistic canal planes were close to parallel, but the angle between the posterior semicircular canals and sagittal head plane was great than 45 degrees that traditionally thought to be.

  15. Esthetic and phonetic rehabilitation with combined maxillofacial prosthesis

    Directory of Open Access Journals (Sweden)

    Aline Úrsula Rocha Fernandes

    2016-01-01

    Full Text Available Basal cell carcinoma is the most common malignant neoplasia affecting the skin. Its prevalence is higher in the face, mainly in the nasal and zygomatic areas. In several cases, the treatment requires surgical intervention which causes facial deformities that impair basic functions (i.e., sight and smell, social interaction, and self-esteem of the patient. Maxillofacial prosthesis is an important way to rehabilitate and reintegrate these patients to their private and social life. The present clinical report aimed to present a prosthetic rehabilitation with combined oculopalpebral and nasal prosthesis of a patient to replace the nasal, zygoma, and orbital tissues after basal cell carcinoma surgical treatment. In addition, the patient was treated with conventional complete dentures to replace the lost teeth due to chemotherapy. The present treatment restored the chewing and speech functions and improved the self-esteem, social life, and quality of life of the patient.

  16. Research and development of a versatile portable speech prosthesis

    Science.gov (United States)

    1981-01-01

    The Versatile Portable Speech Prosthesis (VPSP), a synthetic speech output communication aid for non-speaking people is described. It was intended initially for severely physically limited people with cerebral palsy who are in electric wheelchairs. Hence, it was designed to be placed on a wheelchair and powered from a wheelchair battery. It can easily be separated from the wheelchair. The VPSP is versatile because it is designed to accept any means of single switch, multiple switch, or keyboard control which physically limited people have the ability to use. It is portable because it is mounted on and can go with the electric wheelchair. It is a speech prosthesis, obviously, because it speaks with a synthetic voice for people unable to speak with their own voices. Both hardware and software are described.

  17. Mediastinal abscess and esophageal stricture following voice prosthesis insertion.

    Science.gov (United States)

    Bozzo, Corrado; Meloni, Francesco; Trignano, Mario; Profili, Stefano

    2014-04-01

    The use of a tracheo-esophageal voice prosthesis is a well-established procedure to restore the voice in total laryngectomees. The insertion of the prosthesis is not a risk-free procedure, various complications having been reported especially in irradiated patients. Here described is a case of an esophageal rupture after secondary tracheo-esophageal puncture with mediastinal abscess in a patient previously treated with pharyngo-laryngectomy and subsequent radiotherapy for a left pyriform sinus carcinoma, which required immediate surgical drainage through a left cervical approach. Few weeks after surgical drainage an esophageal stricture at the site of the rupture developed, which was only temporarily resolved after the insertion of biodegradable esophageal stents, followed by re-stenosis once the reabsorption of the stent took place. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  18. An organized start to implant-supported prosthesis

    Directory of Open Access Journals (Sweden)

    Suma Karthigeyan

    2013-01-01

    Full Text Available Various treatment options are available for rehabilitating the complete edentulous patients with implants. However, due consideration for the prosthesis is not given prior to implant surgery. This can result in implant being placed in locations that do not provide the best esthetic and functional result. Incorrect implant localization and angle are the primary cause of non-axial loading and may contribute to loss of Osseo-integration. For predictable outcome, the treatment should begin with visualizing the end result. A step-wise pre-implant surgery evaluation is necessary to achieve the objectives. This is a case report of a completely edentulous patient who was treated with fixed implant prosthesis following various steps in the pre-implant surgery evaluation.

  19. A cognitive prosthesis for complex decision-making.

    Science.gov (United States)

    Tremblay, Sébastien; Gagnon, Jean-François; Lafond, Daniel; Hodgetts, Helen M; Doiron, Maxime; Jeuniaux, Patrick P J M H

    2017-01-01

    While simple heuristics can be ecologically rational and effective in naturalistic decision making contexts, complex situations require analytical decision making strategies, hypothesis-testing and learning. Sub-optimal decision strategies - using simplified as opposed to analytic decision rules - have been reported in domains such as healthcare, military operational planning, and government policy making. We investigate the potential of a computational toolkit called "IMAGE" to improve decision-making by developing structural knowledge and increasing understanding of complex situations. IMAGE is tested within the context of a complex military convoy management task through (a) interactive simulations, and (b) visualization and knowledge representation capabilities. We assess the usefulness of two versions of IMAGE (desktop and immersive) compared to a baseline. Results suggest that the prosthesis helped analysts in making better decisions, but failed to increase their structural knowledge about the situation once the cognitive prosthesis is removed. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Hip arthroplasty. Part 1: prosthesis terminology and classification

    Energy Technology Data Exchange (ETDEWEB)

    Pluot, E. [Department of Radiology, Royal Orthopaedic Hospital NHS Foundation Trust, Birmingham (United Kingdom); Davis, E.T.; Revell, M. [Department of Orthopaedic Surgery, Royal Orthopaedic Hospital NHS Foundation Trust, Birmingham (United Kingdom); Davies, A.M. [Department of Radiology, Royal Orthopaedic Hospital NHS Foundation Trust, Birmingham (United Kingdom); James, S.L.J. [Department of Radiology, Royal Orthopaedic Hospital NHS Foundation Trust, Birmingham (United Kingdom)], E-mail: steven.james@roh.nhs.uk

    2009-10-15

    Hip arthroplasty is an extremely common orthopaedic procedure and there is a wide array of implants that are in current use in the UK. The follow-up of patients who have undergone insertion of a hip prosthesis is shifting from a consultant-lead hospital service towards primary care. As this change in patient care continues it becomes increasingly important that an accurate description of the radiographic features is communicated to the primary-care practitioner so appropriate specialist input can be triggered. This review focuses on the terminology and classification of hip prostheses. This acts as a precursor for Part 2 of this series, which describes the normal and abnormal radiographic findings following hip prosthesis insertion.

  1. Hip arthroplasty. Part 1: prosthesis terminology and classification.

    Science.gov (United States)

    Pluot, E; Davis, E T; Revell, M; Davies, A M; James, S L J

    2009-10-01

    Hip arthroplasty is an extremely common orthopaedic procedure and there is a wide array of implants that are in current use in the UK. The follow-up of patients who have undergone insertion of a hip prosthesis is shifting from a consultant-lead hospital service towards primary care. As this change in patient care continues it becomes increasingly important that an accurate description of the radiographic features is communicated to the primary-care practitioner so appropriate specialist input can be triggered. This review focuses on the terminology and classification of hip prostheses. This acts as a precursor for Part 2 of this series, which describes the normal and abnormal radiographic findings following hip prosthesis insertion.

  2. Designing and testing a hybrid lightweight shoulder prosthesis.

    Science.gov (United States)

    Sekine, Masashi; Tsuchiya, Nobuto; Kita, Kahori; Yu, Wenwei

    2014-01-01

    Lightweight prostheses are preferred in terms of usability in daily living. However, this is not a property easy to realize, especially for shoulder prostheses. High portability, multiple degrees of freedom (DOFs) with an appropriate ROM (range of motion), sufficient end-effector power, and suitable viscoelasticity for the safe use in daily living, usually result in a heavy weight. In this paper, a hybrid shoulder prosthesis that combined servo motors and pneumatic elastic actuators, with a weight distribution scheme, was designed to meet the requirements. The prosthetic system was preliminarily tested by comparing its ADL (activities of daily living) motion data with that of an intact arm. The experiment results showed that the shoulder prosthesis could reproduce the motion of an intact arm, thus demonstrate its usability in daily living.

  3. Running with a powered knee and ankle prosthesis.

    Science.gov (United States)

    Shultz, Amanda H; Lawson, Brian E; Goldfarb, Michael

    2015-05-01

    This paper presents a running control architecture for a powered knee and ankle prosthesis that enables a transfemoral amputee to run with a biomechanically appropriate running gait and to intentionally transition between a walking and running gait. The control architecture consists firstly of a coordination level controller, which provides gait biomechanics representative of healthy running, and secondly of a gait selection controller that enables the user to intentionally transition between a running and walking gait. The running control architecture was implemented on a transfemoral prosthesis with powered knee and ankle joints, and the efficacy of the controller was assessed in a series of running trials with a transfemoral amputee subject. Specifically, treadmill trials were conducted to assess the extent to which the coordination controller provided a biomechanically appropriate running gait. Separate trials were conducted to assess the ability of the user to consistently and reliably transition between walking and running gaits.

  4. Osseo integrated finger prosthesis with a custom abutment

    Directory of Open Access Journals (Sweden)

    Benny Thomas

    2017-01-01

    Full Text Available One of the most regularly encountered forms of partial hand loss causing physical, psychosocial and financial burden to an individual is the finger amputation followed by trauma. The prosthetic rehabilitation of amputated finger is a good treatment option, when compared to all other means of complex and unaffordable options. Osseointegrated implant retained silicone finger prosthesis with innovative prosthetic designs can provide the patient a life changing experience.

  5. Sealing of small postlaryngectomy pharyngocutaneous fistulas with voice prosthesis.

    Science.gov (United States)

    Karakullukcu, M Baris; Lohuis, Peter J; van den Brekel, Michiel W; Hilgers, Frans J M

    2010-10-01

    Pharyngocutaneous fistulas (PCFs) following total laryngectomy is a common complication. The standard therapy is conservative management, and if this is not successful, surgical closure. There is a group of patients with limited survival chance who have small PCFs. In these patients who are not candidates for surgery, sealing of the PCF with a voice prosthesis can significantly improve the functionality of these patients allowing them to swallow and phonate.

  6. Comminuted fractures of the radial head: resection or prosthesis?

    Science.gov (United States)

    Lópiz, Yaiza; González, Ana; García-Fernández, Carlos; García-Coiradas, Javier; Marco, Fernando

    2016-09-01

    At present, surgical treatment of comminuted radial head fractures without associated instability continues to be controversial. When anatomical reconstruction is not possible, radial head excision is performed. However, the appearance of long-term complications with this technique, along with the development of new radial head implants situates arthroplasty as a promising surgical alternative. The purpose of the present study was to compare the mid-term functional outcomes of both techniques. A retrospective study was performed between 2002 and 2011 on 25 Mason type-III fractures, 11 patients treated with primary radial head resection and 14 who received treatment of the fracture with metal prosthesis. At the end of follow-up, patients were contacted and outcomes evaluated according to: Mayo Elbow Performance Score (MEPS), the Disabilities of the Arm, Shoulder and Hand score (DASH) and strength measurement. Radiographic assessment (proximal migration of the radius, osteoarthritic changes, and signs of prosthesis loosening) was also performed. The average age of the sample was 53.7 years in the resection group, and 54.4 years in the replacement group, with a mean follow-up of 60.3 and 42 months respectively. According to the MEPS scale, there were 6 excellent cases, 3 good and 2 acceptable in the resection group, and 6 excellent cases, 3 good, 3 acceptable, and 2 poor in the prosthesis group. The mean DASH score were 13.5, and 24.8 for the resection and the replacement group respectively. We found one postoperative complication in the resection group (stiffness and valgus instability) and 6 in the replacement group: 3 of joint stiffness, 1 case of prosthesis breakage, and 2 neurological injuries. Although this is a retrospective study, the high complication rate occurring after radial head replacement in comparison with radial head resection, as well as good functional results obtained with this last technique, leads us to recommend it for comminuted radial head

  7. Designing manufacturing and the clinic application of the prosthesis for the patients with large ocular defects.

    Science.gov (United States)

    Xueliang, X; Chengye, W; Shuangzhen, L; Yun, D

    1997-09-01

    To design and manufacture the prosthesis of external type for patients with ocular large defects. Silicon and polymethyl methacrylate (PMMA) were chosen the chief materials: The main procedures are: taking the impression, color mixture, making primitive form of the prosthesis, modification and fixation. Fifty patients with large ocular defects took the prosthesis, the cosmetic results are satisfactory. All the patients give satisfactory comments on the 5 main indexes: color 90%, stereo-feeling 100%, peripheral difference 86%, fidelity 98% and fixation 86%. To make ocular prosthesis, materials with good quality and complicated technology are needed. The prosthesis made by silicon combined with PMMA show good results. Among the procedures of making prosthesis, color mixture and fixation are the most important.

  8. Fabrication of an Implant-Supported Fixed Interim Prosthesis Using a Duplicate Denture: An Alternative Technique.

    Science.gov (United States)

    Al-Thobity, Ahmad M

    2016-06-22

    The fabrication of an implant-supported fixed complete denture prosthesis involves multiple clinical and laboratory steps. One of the main steps is to provide the patient with an interim fixed prosthesis to evaluate the patient's esthetic and functional needs as well as to enhance the patient's psychology before proceeding to the definitive prosthesis. Different techniques for fabricating interim prostheses have been described in the literature. This report describes an alternative technique that uses a duplicate denture made of self-curing acrylic resin to fabricate an implant-supported fixed interim prosthesis. The interim prosthesis was later used as a blueprint for the definitive implant-supported hybrid prosthesis. © 2016 by the American College of Prosthodontists.

  9. Prosthetic rehabilitation of large mid-facial defect with magnet-retained silicone prosthesis

    Directory of Open Access Journals (Sweden)

    Kirti Jajoo Shrivastava

    2015-01-01

    Full Text Available Rehabilitation of maxillofacial defect patients is a challenging task. The most common prosthetic treatment problem with such patients is, getting adequate retention, stability, and support. In cases of large maxillofacial defect, movement of the prosthesis is inevitable. The primary objectives in rehabilitating the maxillofacial defect patients are to restore the function of mastication, deglutition, speech, and to achieve normal orofacial appearance. This clinical report describes maxillofacial prosthetic rehabilitation of large midfacial defect including orbit along with its contents, zygoma and soft tissues including half of the nose, cheeks, upper lip of left side, accompanying postsurgical microstomia and orofacial communication, which resulted from severe fungal infection mucormycosis. The defect in this case was restored with magnet retained two piece maxillofacial prosthesis having hollow acrylic resin framework and an overlying silicone facial prosthesis. The retention of prosthesis was further enhanced with the use of spectacles. This type of combination prosthesis enhanced the cosmesis and functional acceptability of prosthesis.

  10. Modified cementless total coxofemoral prosthesis: development, implantation and clinical evaluation

    Directory of Open Access Journals (Sweden)

    S.A. Arias

    2013-12-01

    Full Text Available The aim of this study was to modify canine coxofemoral prostheses and the clinical evaluation of the implantation. Fifteen canine hips and femora of cadavers were used in order to study the surface points of modification in prostheses and develop a perforation guide. Femoral stems and acetabular components were perforated and coated with biphasic calcium phosphate layer. Twelve young adult male mongrel dogs were implanted with coxofemoral prostheses. Six were operated upon and implanted with cemented canine modular hip prostheses, establishing the control group. The remaining six were implanted with a novel design of cementless porous tricalcic phosphate-hydroxyapatite coated hip prostheses. Clinical and orthopedic performance, complications, and thigh muscular hypotrophy were assessed up to the 120th post-operatory day. After 120 days, animals with cementless prostheses had similar clinical and orthopedic performance compared to the cemented group despite the increased pain thigh hypotrophy. Animals that underwent cementless hip prosthesis evidenced more pain, compared to animals with cemented hip prosthesis that required longer recuperation time. No luxations, two fractures and two isquiatic neurapraxies were identified in the course of the study. Using both the cemented and the bioactive coated cementless model were suitable to dogs, showing clinical satisfactory results. Osseointegration and biological fixation were observed in the animals with the modified cementless hip prosthesis.

  11. Visual prosthesis wireless energy transfer system optimal modeling.

    Science.gov (United States)

    Li, Xueping; Yang, Yuan; Gao, Yong

    2014-01-16

    Wireless energy transfer system is an effective way to solve the visual prosthesis energy supply problems, theoretical modeling of the system is the prerequisite to do optimal energy transfer system design. On the basis of the ideal model of the wireless energy transfer system, according to visual prosthesis application condition, the system modeling is optimized. During the optimal modeling, taking planar spiral coils as the coupling devices between energy transmitter and receiver, the effect of the parasitic capacitance of the transfer coil is considered, and especially the concept of biological capacitance is proposed to consider the influence of biological tissue on the energy transfer efficiency, resulting in the optimal modeling's more accuracy for the actual application. The simulation data of the optimal model in this paper is compared with that of the previous ideal model, the results show that under high frequency condition, the parasitic capacitance of inductance and biological capacitance considered in the optimal model could have great impact on the wireless energy transfer system. The further comparison with the experimental data verifies the validity and accuracy of the optimal model proposed in this paper. The optimal model proposed in this paper has a higher theoretical guiding significance for the wireless energy transfer system's further research, and provide a more precise model reference for solving the power supply problem in visual prosthesis clinical application.

  12. Middle Ear Prosthesis with Bactericidal Efficacy—In Vitro Investigation

    Directory of Open Access Journals (Sweden)

    Magdalena Ziąbka

    2017-10-01

    Full Text Available Materials used in ossicular replacement prostheses must possess appropriate biological properties, such as biocompatibility, stability, no cytotoxicity. Due to the risk of infection (otitis media and chronic otitis media, it is desirable to use an antibacterial agent for illness prevention during the ossicular reconstruction. The goal of this work was to observe biological properties of a new composite prosthesis made of ABS containing silver nanoparticles (AgNPs 45T. Samples for biological tests and then a prototype of middle ear prosthesis were prepared using injection moulding and extrusion techniques. In vitro experiments were carried out to assess bactericidal efficacy against Staphylococcus aureus and Pseudomona aeruginosa standard strains, cell proliferation, viability and cytotoxicity, using Hs680.Tr. fibroblast cells. Surface parameters of the samples were evaluated, including roughness and wettability. The silver ions were continually released from the polymer in aqueous solution. The silver ions release was measured as increasing with time and concentration of the silver nanoparticles in the polymer matrix. No cytotoxicity effect was observed, while bactericidal efficacy was noticed for silver nanoparticles. The roughness studies showed an increase in roughness for the samples with silver nanoparticles. All polymer and composite materials containing silver nanoparticles showed hydrophilic properties. The composites were found to release silver ions at a concentration level capable of rendering the antimicrobial efficacy even with the lowest concentration of silver nanoparticles in the material. Our results demonstrate that middle ear prosthesis made of polymer and silver nanoparticles may eliminate bacteria during inflammation in the middle ear.

  13. Middle Ear Prosthesis with Bactericidal Efficacy-In Vitro Investigation.

    Science.gov (United States)

    Ziąbka, Magdalena; Dziadek, Michał; Menaszek, Elżbieta; Banasiuk, Rafał; Królicka, Aleksandra

    2017-10-10

    Materials used in ossicular replacement prostheses must possess appropriate biological properties, such as biocompatibility, stability, no cytotoxicity. Due to the risk of infection (otitis media and chronic otitis media), it is desirable to use an antibacterial agent for illness prevention during the ossicular reconstruction. The goal of this work was to observe biological properties of a new composite prosthesis made of ABS containing silver nanoparticles (AgNPs 45T). Samples for biological tests and then a prototype of middle ear prosthesis were prepared using injection moulding and extrusion techniques. In vitro experiments were carried out to assess bactericidal efficacy against Staphylococcus aureus and Pseudomona aeruginosa standard strains, cell proliferation, viability and cytotoxicity, using Hs680.Tr. fibroblast cells. Surface parameters of the samples were evaluated, including roughness and wettability. The silver ions were continually released from the polymer in aqueous solution. The silver ions release was measured as increasing with time and concentration of the silver nanoparticles in the polymer matrix. No cytotoxicity effect was observed, while bactericidal efficacy was noticed for silver nanoparticles. The roughness studies showed an increase in roughness for the samples with silver nanoparticles. All polymer and composite materials containing silver nanoparticles showed hydrophilic properties. The composites were found to release silver ions at a concentration level capable of rendering the antimicrobial efficacy even with the lowest concentration of silver nanoparticles in the material. Our results demonstrate that middle ear prosthesis made of polymer and silver nanoparticles may eliminate bacteria during inflammation in the middle ear.

  14. Reliability of MRI findings in candidates for lumbar disc prosthesis

    Energy Technology Data Exchange (ETDEWEB)

    Berg, Linda; Espeland, Ansgar [Haukeland University Hospital, Department of Radiology, Bergen (Norway); University of Bergen, Section for Radiology, Department of Surgical Sciences, Bergen (Norway); Neckelmann, Gesche [Haukeland University Hospital, Department of Radiology, Bergen (Norway); Gjertsen, Oeivind [Oslo University Hospital, Department of Neuroradiology, Oslo (Norway); Hellum, Christian [Oslo University Hospital, Department of Orthopaedics, Oslo (Norway); University of Oslo, Department of Orthopaedics, Oslo (Norway); Johnsen, Lars G. [University Hospital of Trondheim, National Centre for Diseases of the Spine, Trondheim (Norway); University Hospital of Trondheim, Orthopaedic Department, Trondheim (Norway); Eide, Geir E. [Haukeland University Hospital, Centre for Clinical Research, Bergen (Norway); University of Bergen, Department of Public Health and Primary Health Care, Bergen (Norway)

    2012-07-15

    Limited reliability data exist for localised magnetic resonance imaging (MRI) findings relevant to planning of treatment with lumbar disc prosthesis and later outcomes. We assessed the reliability of such findings in chronic low back pain patients who were accepted candidates for disc prosthesis. On pretreatment MRI of 170 patients (mean age 41 years; 88 women), three experienced radiologists independently rated Modic changes, disc findings and facet arthropathy at L3/L4, L4/L5 and L5/S1. Two radiologists rerated 126 examinations. For each MRI finding at each disc level, agreement was analysed using the kappa statistic and differences in prevalence across observers using a fixed effects model. All findings at L3/L4 and facet arthropathy at L5/S1 had a mean prevalence <10% across observers and were not further analysed, ensuring interpretable kappa values. Overall interobserver agreement was generally moderate or good (kappa 0.40-0.77) at L4-S1 for Modic changes, nucleus pulposus signal, disc height (subjective and measured), posterior high-intensity zone (HIZ) and disc contour, and fair (kappa 0.24) at L4/L5 for facet arthropathy. Posterior HIZ at L5/S1 and severely reduced subjective disc height at L4/L5 differed up to threefold in prevalence between observers (p < 0.0001). Intraobserver agreement was mostly good or very good (kappa 0.60-1.00). In candidates for disc prosthesis, mostly moderate interobserver agreement is expected for localised MRI findings. (orig.)

  15. [Clinical analysis of prosthesis replacement for proximal humerus tumors].

    Science.gov (United States)

    Weng, Xiaojun; Liao, Qiande; Li, Xiaosheng; Wang, Jing

    2016-01-01

    To explore surgical strategies, functions and prognosis of artificial prosthesis replacement and soft tissue reconstruction for patients with invasive benign or primary malignant proximal humerus tumor.
 A total of 17 patients with invasive benign or primary malignant proximal humerus tumor underwent prosthetic replacement after segment bone tumor resection and soft tissues reconstruction from April 2007 to April 2014 were enrolled. Based on histological types, tumor stages and surgical procedures, the effects of artificial prosthesis replacement and soft tissue reconstruction on prognosis and shoulder joint function were evaluated.
 All patients were followed up for 8 to 96 months (average time: 58.9 months). Among 11 patients with primary malignant tumor, 5 died of tumor recurrence or metastasis, and 6 showed tumor-free survival for 24 to 91 months (average time: 54.83 months). The 6 patients with aggressive benign tumors survived for 39 to 96 months, with an average of 72.33 months. The shoulder joint function of 17 patients recovered to 64.88% of normal. There were significant differences in the shoulder joint function between the patients who underwent half shoulder replacement and those who underwent total shoulder replacement (56.25% vs 72.56%, Pshoulder joint function between the patients who underwent Type I A excision (retention of abductor muscles and rotator cuff) and those who underwent Type I B excision (68.75% vs 61.44%, Pshoulder joint function is associated with the methods of prosthesis replacement and soft tissue resection.

  16. Literature Review on Needs of Upper Limb Prosthesis Users.

    Science.gov (United States)

    Cordella, Francesca; Ciancio, Anna Lisa; Sacchetti, Rinaldo; Davalli, Angelo; Cutti, Andrea Giovanni; Guglielmelli, Eugenio; Zollo, Loredana

    2016-01-01

    The loss of one hand can significantly affect the level of autonomy and the capability of performing daily living, working and social activities. The current prosthetic solutions contribute in a poor way to overcome these problems due to limitations in the interfaces adopted for controlling the prosthesis and to the lack of force or tactile feedback, thus limiting hand grasp capabilities. This paper presents a literature review on needs analysis of upper limb prosthesis users, and points out the main critical aspects of the current prosthetic solutions, in terms of users satisfaction and activities of daily living they would like to perform with the prosthetic device. The ultimate goal is to provide design inputs in the prosthetic field and, contemporary, increase user satisfaction rates and reduce device abandonment. A list of requirements for upper limb prostheses is proposed, grounded on the performed analysis on user needs. It wants to (i) provide guidelines for improving the level of acceptability and usefulness of the prosthesis, by accounting for hand functional and technical aspects; (ii) propose a control architecture of PNS-based prosthetic systems able to satisfy the analyzed user wishes; (iii) provide hints for improving the quality of the methods (e.g., questionnaires) adopted for understanding the user satisfaction with their prostheses.

  17. Urinary Incontinence Could Be Controlled by an Inflatable Penile Prosthesis

    Directory of Open Access Journals (Sweden)

    Hyun Min Choi

    2016-04-01

    Full Text Available Purpose: Due to the increasing numbers of radical prostatectomies (RP performed for prostate cancer, a substantial and increasing number of patients suffer from postoperative urinary incontinence and erectile dysfunction (ED. The objective of our study was to see whether an inflatable penile prosthesis implantation could control urinary incontinence for patients with the dual problems of ED and incontinence. Materials and Methods: From March 2010 through May 2015, 25 post-RP patients were referred to our clinic with ED or incontinence. The degree of incontinence was classified according to the International Consultation on Incontinence Questionnaire-Short Form. Inflatable penile prostheses were implanted in all 25 patients. Results: For one month after implantation, partial or full inflation was performed progressively to control urine leakage. Of 18 patients, 13 patients were categorized with mild or moderate stress incontinence. All 13 patients obtained control of incontinence with partial inflation (30% to 60% and all reported satisfactory outcomes. Five out of the 18 patients were categorized with severe total incontinence. Three of the 5 patients could tolerate incontinence with full inflation on and off. Thirteen patients out of the total of 18 (72.2% had their incontinence controlled by an inflating penile prosthesis. Conclusions: An inflatable penile prosthesis is highly recommended as an initial procedure, especially in patients with the dual problems of ED and incontinence.

  18. Nonwoven polypropylene prosthesis in large abdominal wall defects in rats.

    Science.gov (United States)

    Reis, Patrick dos Santos Barros dos; Chagas, Vera Lucia Antunes; Silva, Jéssica Marquet; Silva, Paulo Cesar; Jamel, Nelson; Schanaider, Alberto

    2012-10-01

    To evaluate, in large abdominal wall defects surgically shaped in rats, if a synthetic polypropylene nonwoven prosthesis could be used as a therapeutic option to conventional polypropylene mesh. Twenty four (24) Wistar rats were enrolled into three groups. Group 1 (Simulation group) with an abdominal wall defect of 3 X 3 left untreated and Groups 2 and 3, respectively treated with a conventional polypropylene mesh and a polypropylene nonwoven (NWV) prosthesis to cover the breach. At the 45th postoperatively day, adhesion (area and strength) and vascularization of Groups 2 and 3 were evaluated. The histological preparations with Hematoxylin-Eosin, Tricromium of Masson, Pricrosirius red and polarization with birefringence, and also the structural analysis of the prostheses carried on by Thermogravimetry and Differential Scanning Calorimetry were also assessed. There were no significant differences between the Groups 2 and 3. In rats, the polypropylene nonwoven prosthesis showed to be safe and has to be considered as an alternative to conventional mesh manufactured by weaving in the treatment of great defects of the abdominal wall.

  19. Osseointegrated silicone finger prosthesis using dental implants: a renovated technique.

    Science.gov (United States)

    Vinnakota, Dileep Nag; Sankar, V Vijay; Chirumamilla, Naveen; Reddy, V Vamsikrishna

    2014-11-01

    In clinical practice, we come across patients with traumatically amputated or congenitally missing partial or complete fingers that can be restored using microsurgical replantation or transplantation procedures. However, in some cases this might not be possible due to systemic or local factors and the lost or missing part has to be replaced prosthetically to offer psychological and functional wellbeing. These prostheses can be constructed with various materials like acrylics or silicone retained with the help of auxiliary aids. However, these prostheses cause some hindrance in performing functions like writing, typing, etc. The aim of the present trial was to ameliorate the existing design of implant supported finger prosthesis. Distal phalange of middle finger replaced with implant supported silicone finger prosthesis is modified by utilizing a metal framework to support silicone material to improve rigidity while working. We could achieve a good function, esthetics and tactile sensibility with this modified design. Whenever, feasible this design can improve the performance and patients feel a deep sense of satisfaction and improved self-esteem with this modified prosthesis.

  20. Actinomyces gerencseriae hip prosthesis infection: a case report.

    Science.gov (United States)

    Dubourg, Grégory; Delord, Marion; Gouriet, Frédérique; Fournier, Pierre-Edouard; Drancourt, Michel

    2015-09-28

    Actinomyces bacteria are part of the human oropharyngeal microbiota. They have been associated with abdominal, cervicofacial and thoracic infections and a few cases of joint infections have also been described. In particular, Actinomyces gerencseriae, formerly described as Actinomyces israelii serovar II, has rarely been associated with human infections, mostly involving cervicofacial lesions and periodontal diseases. Here, we report one case of hip prosthesis infection due to A. gerencseriae. A 72-year-old Caucasian male developed an inflammatory collection on the outside of the right thigh where a hip prosthesis had been implanted for 11 years. Culturing a fluid sample from the collection puncture found Staphylococcus hominis and a Gram-positive bacillus unidentified by matrix-assisted laser desorption ionization time-of-flight mass-spectrometry (MALDI-TOF). Sequencing the 16S rRNA gene amplified from both the specimen and the isolate identified A. gerencseriae. Treatment adjusted with amoxicillin and trimethropim-sulfamethoxazole cured the infection. The recently described A. gerencseriae has rarely been involved in human infections. We report the first case of A. gerencseriae joint infection in a hip prosthesis.

  1. Impact of removable partial denture prosthesis on chewing efficiency

    Directory of Open Access Journals (Sweden)

    Marion Bessadet

    2013-09-01

    Full Text Available Removable partial denture prostheses are still being used for anatomic, medical and economic reasons. However, the impact on chewing parameters is poorly described. OBJECTIVES: The objective of this study was to estimate the impact of removable partial denture prosthesis on masticatory parameters. MATERIAL AND METHODS: Nineteen removable partial denture prosthesis (RPDP wearers participated in the study. Among them, 10 subjects were Kennedy Class III partially edentulous and 9 with posterior edentulism (Class I. All presented a complete and full dentate opposing arch. The subjects chewed samples of carrots and peanuts with and without their prosthesis. The granulometry of the expectorated boluses from carrot and peanuts was characterized by median particle size (D50, determined at the natural point of swallowing. Number of chewing cycles (CC, chewing time (CT and chewing frequency (CF=CC/CT were video recorded. RESULTS: With RPDP, the mean D50 values for carrot and peanuts were lower [Repeated Model Procedures (RMP, F=15, p<0.001] regardless of the type of Kennedy Class. For each food, mean CC, CT and CF values recorded decreased (RMP, F=18, F=9, and F=20 respectively, p<0.01. With or without RPD, the boluses' granulometry values were above the masticatory normative index (MNI determined as 4,000 µm. CONCLUSION: RPDP rehabilitation improves the ability to reduce the bolus particle size, but does not reestablish fully the masticatory function. CLINICAL RELEVANCE: This study encourages the clinical improvement of oral rehabilitation procedure.

  2. A fiber-reinforced composite prosthesis restoring a lateral midfacial defect: a clinical report.

    Science.gov (United States)

    Kurunmäki, Hemmo; Kantola, Rosita; Hatamleh, Muhanad M; Watts, David C; Vallittu, Pekka K

    2008-11-01

    This clinical report describes the use of a glass fiber-reinforced composite (FRC) substructure to reinforce the silicone elastomer of a large facial prosthesis. The FRC substructure was shaped into a framework and embedded into the silicone elastomer to form a reinforced facial prosthesis. The prosthesis is designed to overcome the disadvantages associated with traditionally fabricated prostheses; namely, delamination of the silicone of the acrylic base, poor marginal adaptation over time, and poor simulation of facial expressions.

  3. Magnetic resonance imaging compatibility test of a cranial prosthesis with titanium screws

    Science.gov (United States)

    Jimenez, R.; Benavides, A.; Flores, D.; Hidalgo, S. S.; Solis, S. E.; Uribe, E.; Rodriguez, A. O.

    2012-10-01

    The follow-up of patients with skull prosthesis is necessary to provide adequate medical care. Skull prostheses for cranioplasty have been developed at the Faculty of Odontology of Universidad Nacional Autonoma de Mexico. We built a skull prosthesis phantom and tested for compatibility with standard magnetic resonance imaging procedures. Results showed full compatibility but susceptibility artefacts occurred due to titanium used to fix the prosthesis to the skull.

  4. Teicoplanin-Containing Cement Spacers for Treatment of Experimental Staphylococcus aureus Joint Prosthesis Infection

    OpenAIRE

    Ismael, Farid; Bléton, Rémy; Saleh-Mghir, Azzam; Dautrey, Sophie; Massias, Laurent; Crémieux, Anne-Claude

    2003-01-01

    Using a rabbit model of methicillin-resistant Staphylococcus aureus knee-prosthesis infection, we studied the efficacy of teicoplanin cement alone or in combination with systemic intramuscular (i.m.) injections of teicoplanin. Seven days after infection, surgical debridement and removal of the infected prostheses were performed, and five rabbits were randomly assigned to one of five different treatment groups: untreated controls, prosthesis replacement by drug-free cement spacer, prosthesis r...

  5. Prototyping of Cosmetic Prosthesis of Upper Limb Using Additive Manufacturing Technologies

    OpenAIRE

    Aleksandra Radosh; Wiesław Kuczko; Radosław Wichniarek; Filip Górski

    2017-01-01

    This paper describes prototyping of an individualized cosmetic arm prosthesis. Aim of the studies was to obtain an anatomically correct, lightweight prosthesis. It was accomplished using additive manufacturing technology of fused deposition modeling. The data was obtained by 3D scanning. An experimental concept of dual extrusion of two different materials was applied – the prosthesis was divided into an elastic shell and a rigid core, manufactured in one process. Obtained results were positiv...

  6. Prototyping of Cosmetic Prosthesis of Upper Limb Using Additive Manufacturing Technologies

    Directory of Open Access Journals (Sweden)

    Aleksandra Radosh

    2017-09-01

    Full Text Available This paper describes prototyping of an individualized cosmetic arm prosthesis. Aim of the studies was to obtain an anatomically correct, lightweight prosthesis. It was accomplished using additive manufacturing technology of fused deposition modeling. The data was obtained by 3D scanning. An experimental concept of dual extrusion of two different materials was applied – the prosthesis was divided into an elastic shell and a rigid core, manufactured in one process. Obtained results were positive.

  7. The method of manufacture of nylon dental partially removable prosthesis using additive technologies

    Science.gov (United States)

    Kashapov, R. N.; Korobkina, A. I.; Platonov, E. V.; Saleeva, G. T.

    2014-12-01

    The article is devoted to the topic of creating new methods of dental prosthesis. The aim of this work is to investigate the possibility of using additive technology to create nylon prosthesis. As a result of experimental studies, was made a sample of nylon partially removable prosthesis using 3D printing has allowed to simplify, accelerate and reduce the coat of manufacturing high-precision nylon dentures.

  8. A comparison of microelectrodes for a visual cortical prosthesis using finite element analysis

    Directory of Open Access Journals (Sweden)

    Emma Kate Brunton

    2012-09-01

    Full Text Available Altering the geometry of microelectrodes for use in a cortical neural prosthesis modifies the electric field generated in tissue, thereby affecting electrode efficacy and tissue damage. Commonly, electrodes with an active region located at the tip (conical electrodes are used for stimulation of cortex but there is argument to believe this geometry may not be the best. Here we use finite element analysis to compare the electric fields generated by three types of electrodes, a conical electrode with exposed active tip, an annular electrode with active area located up away from the tip, and a striped annular electrode where the active annular region has bands of insulation interrupting the full active region. The results indicate that current density on the surface of the conical electrodes can be up to ten times greater than current density on annular electrodes of the same height, which may increase the propensity for tissue damage. However choosing the most efficient electrode geometry in order to reduce power consumption is dependent on the distance of the electrode to the target neurons. If neurons are located within 10 micrometers of the electrode, then a small conical electrode would be more power efficient. On the other hand if the target neuron is greater than 500 micrometers away – as happens normally when insertion of an array of electrodes into cortex results in a kill zone around each electrode due to insertion damage and inflammatory responses - then a large annular electrode would be more efficient.

  9. Long-term anesthetic protocol in rats: feasibility in electrophysiology studies in visual prosthesis.

    Science.gov (United States)

    Barriga-Rivera, Alejandro; Tatarinoff, Veronica; Lovell, Nigel H; Morley, John W; Suaning, Gregg J

    2017-11-17

    Electrical stimulation of excitable cells provides therapeutic benefits for a variety of medical conditions, including restoration of partial vision to those blinded via some types of retinal degeneration. To improve visual percepts elicited by the current technology, researchers are conducting acute electrophysiology experiments, mainly in cats. However, the rat can provide a model of a range of retinal diseases and possesses a sufficiently large eye to be used in this field. This article presents a long-term anesthetic protocol to enable electrophysiology experiments to further the development of visual prostheses. Six Long-Evans rats (aged between 14 and 16 weeks) were included in this study. Surgical anesthesia was maintained for more than 15 h by combining constant intravenous infusion of ketamine (24.0-34.5 mg/kg/h), xylazine (0.9-1.2 mg/kg/h), and inhaled isoflurane in oxygen (<0.5%). Overall heart rate, respiratory rate, and body temperature remained between 187-233 beats/min, 45-58 breaths/min, and 36-38 °C, respectively. Neural responses to 200-ms light pulses were recorded from the superior colliculus using a 32-channel neural probe at the beginning and before termination of the experiment. Robust responses were recorded from distinct functional types of retinal pathways. In addition, a platinum electrode was implanted in the retrobulbar space. The retina was electrically stimulated, and the activation threshold was determined to be 5.24 ± 0.24 μC/cm2 . This protocol may be used not only in the field of visual prosthesis research, but in other research areas requiring longer term acute experiments. © 2017 American College of Veterinary Ophthalmologists.

  10. EDITORIAL: Focus on the neural interface Focus on the neural interface

    Science.gov (United States)

    Durand, Dominique M.

    2009-10-01

    The possibility of an effective connection between neural tissue and computers has inspired scientists and engineers to develop new ways of controlling and obtaining information from the nervous system. These applications range from `brain hacking' to neural control of artificial limbs with brain signals. Notwithstanding the significant advances in neural prosthetics in the last few decades and the success of some stimulation devices such as cochlear prosthesis, neurotechnology remains below its potential for restoring neural function in patients with nervous system disorders. One of the reasons for this limited impact can be found at the neural interface and close attention to the integration between electrodes and tissue should improve the possibility of successful outcomes. The neural interfaces research community consists of investigators working in areas such as deep brain stimulation, functional neuromuscular/electrical stimulation, auditory prostheses, cortical prostheses, neuromodulation, microelectrode array technology, brain-computer/machine interfaces. Following the success of previous neuroprostheses and neural interfaces workshops, funding (from NIH) was obtained to establish a biennial conference in the area of neural interfaces. The first Neural Interfaces Conference took place in Cleveland, OH in 2008 and several topics from this conference have been selected for publication in this special section of the Journal of Neural Engineering. Three `perspectives' review the areas of neural regeneration (Corredor and Goldberg), cochlear implants (O'Leary et al) and neural prostheses (Anderson). Seven articles focus on various aspects of neural interfacing. One of the most popular of these areas is the field of brain-computer interfaces. Fraser et al, report on a method to generate robust control with simple signal processing algorithms of signals obtained with electrodes implanted in the brain. One problem with implanted electrode arrays, however, is that

  11. Complete occipitalization of the atlas with bilateral external auditory canal atresia.

    Science.gov (United States)

    Dolenšek, Janez; Cvetko, Erika; Snoj, Žiga; Meznaric, Marija

    2017-02-18

    Fusion of the atlas with the occipital bone is a rare congenital dysplasia known as occipitalization of the atlas, occipitocervical synostosis, assimilation of the atlas, or atlanto-occipital fusion. It is a component of the paraxial mesodermal maldevelopment and commonly associated with other dysplasias of the craniovertebral junction. External auditory canal atresia or external aural atresia is a rare congenital absence of the external auditory canal. It occurs as the consequence of the maldevelopment of the first pharyngeal cleft due to defects of cranial neural crest cells migration and/or differentiation. It is commonly associated with the dysplasias of the structures derived from the first and second pharyngeal arches including microtia. We present the coexistence of the occipitalization of the atlas and congenital aural atresia, an uncommon combination of the paraxial mesodermal maldevelopment, and defects of cranial neural crest cells. The association is most probably syndromic as minimal diagnostic criteria for the oculoariculovertebral spectrum are fulfilled. From the clinical point of view, it is important to be aware that patients with microtia must obtain also appropriate diagnostic imaging studies of the craniovetebral junction due to eventual concomitant occipitalization of the atlas and frequently associated C1-C2 instability.

  12. Use of Powered Prosthesis for Children with Upper Limb Deficiency at Hyogo Rehabilitation Center.

    Directory of Open Access Journals (Sweden)

    Mitsunori Toda

    Full Text Available There has been no research investigating the use of powered prosthetic for children in Japan.To gain better insight into the state of powered prosthesis usage and identify a ratio of rejection among children.Subjects were 37 unilateral below elbow amputees between the ages of 0 and 16 at the time of their first experienced fitting with a powered prosthesis at our Center. The information was collected from medical records and through face-to-face interviews, and we examined rejection rate and the factors affecting the use of powered prosthesis.The rate of discontinuation was 21.6% as 8 of the 37 children stopped using powered prosthesis. All of them were fitted their prosthesis after 2 years of age, and they rejected prosthesis between 5 to 19 years. We found that the level of amputation had no influence on the use of a powered prosthesis.Children fitted before 2 years of age tend to accept their powered prosthesis than those fitted after 2 years. Multidisciprinary team approach, adequate rehabilitation, detailed follow-up and involvement of parents are quite important for introducing powered prosthesis for children.

  13. Effectiveness of the heat-activated nitinol smart piston stapes prosthesis in stapedectomy surgery.

    Science.gov (United States)

    Cho, John J W; Yunker, Warren K; Marck, Paulette; Marck, Paul A

    2011-02-01

    To compare the SMart piston stapes prosthesis to a standard manual crimp prosthesis on operative time and air-bone gap (ABG) closure in stapedectomy. Retrospective chart review. Tertiary referral centre. The charts of patients undergoing stapedectomy for otosclerosis were analyzed. We compared the results of 76 patients (80 ears) who received the autocrimping SMart piston prosthesis to those of 21 patients (21 ears) who received the conventional manual crimp Fisch-type prosthesis. Data were analyzed using t-test, chi-square, or two-way analysis of variance where appropriate. Operative time with ABG closure as a secondary outcome measure. There was a significant difference in operative time between the Fisch-type prosthesis and the SMart piston prosthesis groups. The operation required 28.9 ± 3.2 minutes when using the Fisch-type prosthesis, whereas 21.2 ± 2.4 minutes were needed when using the SMart piston (p piston (28.1 ± 3.1 to 9.0 ± 1.4, p piston (25.1 ± 3.7 to 8.2 ± 2.5, p piston prosthesis results in ABG closure similar to that of the traditional Fisch-type prosthesis but offers the added advantage of reduced operative time.

  14. Three-part mould technique for fabrication of hollow thumb prosthesis: A case report.

    Science.gov (United States)

    Jain, Ajay; Walker, Fraser S; Ugrappa, Sridevi; Makkad, Sumit; Ugrappa, Vijay Kumar

    2016-12-01

    The purpose of this article is to describe a technique which helps in fabrication of glove-type hollow thumb prosthesis using three-part mould technique. Patient reported to the Department of Private dental clinic, Delhi, India with a chief complaint of missing partial left thumb and wanted to get it replaced. A complete clinical hand examination was carried out, which revealed a residual stump of 1 cm length. After ensuring the medical conditions to be normal, fabrication of hollow thumb prosthesis was planned using three-part mould technique. The prosthesis delivered to the patient was highly retentive because of its glove-type retention and lighter weight; feedback from the patient regarding retention was excellent. The prosthesis was aesthetically pleasing because of its excellent colour matching with the skin, and each and every part of the prosthesis could be colour customized because of easy retrieval of the third part of the mould, as well. A technique of hollow thumb prosthesis has been described in this article which helps in reduction in weight, easy packing of silicone material into the mould and easy colour customization at the knuckles area of the dorsal and ventral aspect of the prosthesis. This three-part mould technique helps to fabricate hollow prosthesis which increases retainability and at the same time allows easy packing of silicone material and easy colour customization at the knuckles area of the prosthesis. © The International Society for Prosthetics and Orthotics 2015.

  15. Isolated pump erosion of an inflatable penile prosthesis through the scrotum in a diabetic patient

    Directory of Open Access Journals (Sweden)

    Raidh A. Talib

    2013-04-01

    Full Text Available Isolated pump erosion is a rare complication in patients with inflatable penile prosthesis. We describe a case of a diabetic patient who underwent inflatable penile prosthesis implantation with subsequent isolated pump erosion. Repeated attempts of conservative repair of the erosion failed. Finally, the inflatable penile prosthesis was replaced with a malleable one to avoid new pump erosion. In case of isolated pump erosion, replacement of the inflatable penile prosthesis with a malleable one looks to be a good alternative salvage treatment for the patient.

  16. Penile prosthesis implant: scientific advances and technological innovations over the last four decades.

    Science.gov (United States)

    Chung, Eric

    2017-02-01

    Despite introduction of oral phosphodiesterase type 5 inhibitors and intracavernosal vasoactive agents, penile prosthesis implant remains a relevant and desired option with sales of penile prostheses continue to stay high, as many men became refractory to medical therapy and/or seeking a more effective and permanent therapy. There are two types of penile prosthesis implants: inflatable and non-inflatable types, and the inflatable penile implants can be subdivided into single-, two- and three-piece devices. Non-inflatable penile prosthesis (non-IPP) may be referred to as semi-rigid rod or malleable prosthesis. IPP is considered a superior option to malleable prosthesis as it produces penile rigidity and flaccidity that closely replicates a normal penile erectile function. Since the introduction of IPP by Scott in 1973, surgical landscape for penile prosthesis implantation has changed dramatically. Advances in prosthesis design, device technologies and surgical techniques have made penile prosthesis implant a more natural, durable and reliable device. The following article reviews the scientific advances and technological innovation in modern penile prosthesis implants over the last four decades.

  17. Anal cancer; Cancer du canal anal

    Energy Technology Data Exchange (ETDEWEB)

    Fesneau, M.; Champeaux-Orange, E. [Service de radiotherapie, Centre regional universitaire de cancerologie Henry-S.-Kaplan CHU de Tours, Hopital Bretonneau, 37 - Tours (France); Champeaux-Orange, E. [Service d' oncologie-radiotherapie, Centre hospitalier regional d' Orleans, 45 - Orleans (France); Hennequin, C. [Service de cancerologie-radiotherapie, hopital Saint-Louis, 75 - Paris (France)

    2010-07-01

    Anal canal epidermoid carcinomas represent 1.2% of digestive cancers and 6% of ano-rectal cancers. For localized diseases, the treatment is based on radiotherapy with or without chemotherapy (5-FU and cisplatin or mitomycin), according to tumour and nodal extension. The recommended treatment dose is 45 Gy in the anal canal, the mesorectum, para-rectal lymph nodes, and inguinal lymph nodes. An additional dose of 15 to 20 Gy is delivered in the initial tumour for good responders. Salvage surgery is necessary in case of poor response. The organs at risk to be considered are bladder, femur heads, small intestine and vulva. The objective of this work is to summarize the epidemiological and radio-anatomic and prognostic characteristics of this tumour. The conformal radiotherapy technique is illustrated by a case report. (authors)

  18. Root Canal Filling after Revascularization/Revitalization.

    Science.gov (United States)

    Plascencia, Hugo; Cruz, Álvaro; Díaz, Mariana; Jiménez, Ana Laura; Solís, Rodrigo; Bernal, Cesar

    Revascularization/revitalization therapy is considered an alternative procedure for management of teeth with an immature apex and necrotic pulp, mainly when root development is interrupted in the early phases of formation. However, this clinical treatment protocol should be considered a permanent procedure? A maxillary central incisor with a previous and successful RR treatment was intentionally filled with a biocompatible material with the periapical tissues due to the patient's lack of adherence to the follow-up protocol. The 20-month follow-up showed absence of clinical, radiological and tomographic signs and symptoms of an endodontic re-infection. This case demonstrates that once the increased thickening of the canal walls, incrementing the root length, apical closure and the total resolution of the apical lesion are observed, the main canal of a previously treated tooth with an RR procedure can be filled.

  19. Squamous cell carcinoma of the anal canal.

    LENUS (Irish Health Repository)

    Martin, F T

    2012-01-31

    Squamous cell carcinoma ofthe anal canal represents 1.5% of all malignancies affectingthe gastrointestinal tract. Over the past 20 years dramatic changes have been seen in both the epidemiological distribution of the disease and in the therapeutic modalities utilised to manage it. CLINICAL MANAGEMENT: Historically abdominoperineal resection had been the treatment of choice with local resection reserved for early stage disease. Work by Nigro et al. has revolutionised how we currently manage carcinoma of the anal canal, demonstrating combined modality chemoradiotherapy as an appropriate alternative to surgical resection with the benefit of preserving sphincter function. Surgery is then reserved for recurrent disease with salvage abdominoperineal resection. This article reviews current literature and highlights the changing therapeutic modalities with selected clinical cases

  20. Neuronal hyperplasia in the anal canal

    DEFF Research Database (Denmark)

    Fenger, C; Schrøder, H D

    1990-01-01

    In a consecutive series of minor surgical specimens from the anal canal, neuronal hyperplasia was found in nine of 56 haemorrhoidectomy specimens and in four of 23 fibrous polyps. In an additional series of 14 resections of the anal canal, neuronal hyperplasia was present in six cases, of which...... five showed haemorrhoids. In all cases, neuronal hyperplasia was located in the submucosa beneath squamous epithelium and extended over an area from 5 to 12 mm. Immunohistochemically, the foci of hyperplasia were found to consist of both neuronal and Schwann cell components. Staining for vasoactive...... intestinal peptide, neuropeptide Y and calcitonin gene related peptide, did not demonstrate any increased terminal density. It is suggested that anal neuronal hyperplasia in these cases represents an acquired lesion due to local mechanical influence....

  1. Treatment of sharp mandibular alveolar process with hybrid prosthesis

    Directory of Open Access Journals (Sweden)

    Sukaedi Sukaedi

    2010-09-01

    Full Text Available Background: Losing posterior teeth for a long time would occasionally lead to the sharpening of alveolar process. The removable partial denture usually have problems when used during mastication, because of the pressure on the mucosa under the alveolar ridge. Purpose: The purpose of this case report was to manage patients with sharp mandibular alveolar process by wearing hybrid prosthesis with extra coronal precision attachment retention and soft liner on the surface base beneath the removable partial denture. Case: A 76 years old woman visited the Prosthodontic Clinic Faculty of Dentistry Airlangga University. The patient had a long span bridge on the upper jaw and a free end acrylic removable partial denture on the lower jaw. She was having problems with mastication. The patient did not wear her lower denture because of the discomfort with it during mastication. Hence, she would like to replace it with a new removable partial denture. Case management: The patient was treated by wearing a hybrid prosthesis with extra coronal precision attachment on the lower jaw. Soft liner was applied on the surface of the removable partial denture. Hybrid prosthesis is a complex denture consisting of removable partial denture and fixed bridge. Conclusion: It concluded that after restoration, the patient had no problems with sharp alveolar process with her new denture, and she was able to masticate well.Latar belakang: Kehilangan geligi posterior dapat menimbulkan processus alveolaris tajam. Gigi tiruan sebagian lepasan mempunyai masalah selama pengunyahan karena adanya tekanan di mukosa di bawah alveolar ridge. Tujuan: Tujuan laporan kasus ini adalah untuk menjelaskan cara menangani pasien yang mempunyai prosesus alveolaris yang tajam di rahang bawah dengan dibuatkan protesis hybrid dengan daya tahan extra coronal precision attachment dan soft liner di permukaan bawah basis gigi tiruan sebagian lepasan. Kasus: Pasien wanita berumur 76 tahun datang di klinik

  2. The shape of the human lumbar vertebral canal A forma do canal vertebral lombar humano

    Directory of Open Access Journals (Sweden)

    Edmundo Zarzur

    1996-09-01

    Full Text Available Literature on the anatomy of the human vertebral column characterizes the shape of the lumbar vertebral canal as triangular. The purpose of the present study was to determine the precise shape of the lumbar vertebral canal. Ten lumbar vertebral columns of adult male cadavers were dissected. Two transverse sections were performed in the third lumbar vertebra. One section was performed at the level of the lower border of the ligamenta flava, and the other section was performed at the level of the pedicles. The shape of the lumbar vertebral canal at the level of the pedicles tends to be oval or circular, whereas the shape of the lumbar vertebral canal at the level of the lower border of the ligamenta flava is triangular. Thus, the shape of the human lumbar vertebral canal is not exclusively triangular, as reported in the literature. It is related to the level of the transversal section performed on the lumbar vertebra. This finding should be taken into consideration among factors involved in the spread of solutions introduced into the epidural space.A literatura sobre a anatomia da coluna vertebral descreve como sendo triangular o formato do canal vertebral na região lombar. O objetivo deste estudo é determinar a real forma do canal da coluna vertebral lombar.Dez colunas vertebrais de cadáveres de homens adultos foram dissecadas. Dois cortes transversais foram executados na terceira vértebra lombar. Um corte foi feito no nível das bordas inferiores de dois ligamentos amarelos vizinhos e o outro corte foi transversal, no nível dos pedículos. A forma do canal vertebral variou: no nível dos pedículos ela tende a ser oval ou circular e junto às bordas inferiores dos ligamentos amarelos passa a ser triangular. Portanto, a forma do canal vertebral lombar não é somente triangular; ela depende do nível em que se faz o corte transversal da vértebra. Estes achados devem ser levados em consideração entre os fatores envolvidos na difusão das

  3. Neural Networks

    Directory of Open Access Journals (Sweden)

    Schwindling Jerome

    2010-04-01

    Full Text Available This course presents an overview of the concepts of the neural networks and their aplication in the framework of High energy physics analyses. After a brief introduction on the concept of neural networks, the concept is explained in the frame of neuro-biology, introducing the concept of multi-layer perceptron, learning and their use as data classifer. The concept is then presented in a second part using in more details the mathematical approach focussing on typical use cases faced in particle physics. Finally, the last part presents the best way to use such statistical tools in view of event classifers, putting the emphasis on the setup of the multi-layer perceptron. The full article (15 p. corresponding to this lecture is written in french and is provided in the proceedings of the book SOS 2008.

  4. Stress analysis of different prosthesis materials in implant-supported fixed dental prosthesis using 3D finite element method

    Directory of Open Access Journals (Sweden)

    Pedram Iranmanesh

    2014-01-01

    Full Text Available Introduction: In the present study, the finite element method (FEM was used to investigate the effects of prosthesis material types on stress distribution of the bone surrounding implants and to evaluate stress distribution in three-unit implant-supported fixed dental prosthesis (FDP. Materials and Methods: A three-dimensional (3D finite element FDP model of the maxillary second premolar to the second molar was designed. Three load conditions were statically applied on the functional cusps in horizontal (57.0 N, vertical (200.0 N, and oblique (400.0 N, θ = 120° directions. Four standard framework materials were evaluated: Polymethyl methacrylate (PMMA, base-metal, porcelain fused to metal, andporcelain. Results: The maximum of von Mises stress in the oblique direction was higher than the vertical and horizontal directions in all conditions. In the bone-crestal section, the maximum von Mises stress (53.78 MPa was observed in PMMA within oblique load. In FDPs, the maximum stress was generated at the connector region in all conditions. Conclusion: A noticeable difference was not observed in the bone stress distribution pattern with different prosthetic materials. Although, higher stress value could be seen in polymethyl methacrylate, all types of prosthesis yielded the same stress distribution pattern in FDP. More clinical studies are needed to evaluate the survival rate of these materials.

  5. Prosthesis Prescription Protocol of the Arm (PPP-Arm): The implementation of a national prosthesis prescription protocol.

    Science.gov (United States)

    Wijdenes, Paula; Brouwers, Michael; van der Sluis, Corry K

    2018-02-01

    In order to create more uniformity in the prescription of upper limb prostheses by Dutch rehabilitation teams, the development and implementation of a Prosthesis Prescription Protocol of the upper limb (PPP-Arm) was initiated. The aim was to create a national digital protocol to structure, underpin, and evaluate the prescription of upper limb prostheses for clients with acquired or congenital arm defects. Prosthesis Prescription Protocol of the Arm (PPP-Arm) was developed on the basis of the International Classification of Functioning and consisted of several layers. All stakeholders (rehabilitation teams, orthopedic workshops, patients, and insurance companies) were involved in development and implementation. A national project coordinator and knowledge brokers in each team were essential for the project. PPP-Arm was successfully developed and implemented in nine Dutch rehabilitation teams. The protocol improved team collaboration, structure, and completeness of prosthesis prescriptions and treatment uniformity and might be interesting for other countries as well. Clinical relevance A national protocol to prescribe upper limb prostheses can be helpful to create uniformity in treatment of patients with upper limb defects. Such a protocol improves quality of care for all patients in the country.

  6. Koebner phenomenon of the ear canal skin.

    LENUS (Irish Health Repository)

    Young, O

    2009-02-01

    The Koebner phenomenon originally described the appearance of psoriatic lesions in the uninvolved skin of patients with psoriasis as a consequence of trauma. We describe a case of concurrent lichen planus and sarcoidosis in the auditory canal, which represents an unusual manifestation of the Koebner phenomenon. This is the first case of concurrent lichen planus and sarcoidosis in the head and neck region and highlights the need for biopsy to allow accurate histopathological diagnosis and treatment.

  7. Koebner phenomenon of the ear canal skin.

    LENUS (Irish Health Repository)

    Young, O

    2012-02-01

    The Koebner phenomenon originally described the appearance of psoriatic lesions in the uninvolved skin of patients with psoriasis as a consequence of trauma. We describe a case of concurrent lichen planus and sarcoidosis in the auditory canal, which represents an unusual manifestation of the Koebner phenomenon. This is the first case of concurrent lichen planus and sarcoidosis in the head and neck region and highlights the need for biopsy to allow accurate histopathological diagnosis and treatment.

  8. Root canal filling using Resilon: a review.

    LENUS (Irish Health Repository)

    Shanahan, D J

    2011-07-01

    Root canal treatment is achieved by chemo-mechanical debridement of the root canal system followed by filling. The filling material \\'entombs\\' residual bacteria and acts as a barrier which prevents the entrance of oral microorganisms and reinfection of the root canal system through microleakage. However, filling with contemporary root filling materials such as gutta-percha offers limited long-term resistance to microorganisms; as a result other materials such as Resilon have been investigated as alternatives. The aim of this review was to analyse the literature to consider whether Resilon is a suitable root canal filling material. A MEDLINE and Cochrane library search including various keyword searches identified several papers which investigated or discussed Resilon or RealSeal\\/Epiphany. Analysis of the literature demonstrated that the bulk of the literature is in vitro in nature, based largely on leakage-type studies, and demonstrates a wide variety of methodologies with conflicting findings; as a result meaningful conclusions are difficult. Within the limit of these in vitro studies Resilon appears to perform adequately in comparison to gutta-percha, however, as a result of the questionable merit of such studies, it cannot presently be considered an evidence-based alternative to the current gold standard gutta-percha. It is imperative that before Resilon is considered as a replacement material, a better understanding of the physical properties of the resin sealer and the reality of the adhesive \\'monoblock\\' are elucidated. The literature also demonstrates a paucity of quality long-term clinical outcome studies which will need to be addressed before firm conclusions can be reached.

  9. Carotid canal dehiscence in the human skull

    Energy Technology Data Exchange (ETDEWEB)

    Pastor Vazquez, J.F.; Gil Verona, J.A. [Department of Anatomy, Faculty of Medicine, University of Valladolid, Ramon y Cajal, 7, E-47005 Valladolid (Spain); Garcia Porrero, M. [Department of Radiology, Faculty of Medicine, University of Valladolid (Spain)

    1999-06-01

    Abnormalities of the floor of the carotid canal have been studied in 538 skulls. These abnormalities range from a fissure to total absence of the floor. This variation may be caused by abnormalities of the internal carotid artery or deficiencies in ossification of the skull base. CT suggests that these changes should be taken into account by surgeons working on the skull base. (orig.) With 4 figs., 8 refs.

  10. Roentgenographic study of the mandibular canal

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Hyung Kyu [Dept. of Oral Radiology, College of Dentistry, Seoul National University, Seoul (Korea, Republic of)

    1980-11-15

    The mandibular canal must be considered carefully during the surgical treatment, especially surgical extraction of the impacted tooth and intraosseous implant, because it contains the important inferior alveolar nerve and vessels. The author investigated the curvature of the mandibular canal and its relation to the mandibular molars and positional relation between the mental foramen and the mandibular premolars in orthopantomogram. The materials consisted of 441 orthopantomograms divided four groups; Group I consisted of 56 males and 44 females from 1 to 6 years of age, Group II consisted of 58 males and 45 females from 7 to 12 years of age, Group III consisted of 65 males and 33 females from 13 to 18 years of age, Group IV consisted of 86 males and 54 females over 19 years of age. The results were as followings; 1. The curvature of mandibular canal was 144.50 .deg. in Group II, 148.11 .deg. in Group III, 147.33 .deg. in Group IV. 2. The curvature of mandibular canal was located most frequently on the area between mandibular 1st molar and mandibular 2nd molar in Group I (42%) and on the mandibular 2nd molar area in Group II (54%), Group III (59%), Group IV (53%). 3. The position of mental foramen was most frequently below the mandibular 1st premolar in Group I (58%), between the mandibular 1st premolar and the 2nd premolar in Group II (62%), Group III (47%), and below the mandibular 2nd premolar in Group IV (58%).

  11. Lesions in the external auditory canal

    Directory of Open Access Journals (Sweden)

    Priyank S Chatra

    2011-01-01

    Full Text Available The external auditory canal is an S- shaped osseo-cartilaginous structure that extends from the auricle to the tympanic membrane. Congenital, inflammatory, neoplastic, and traumatic lesions can affect the EAC. High-resolution CT is well suited for the evaluation of the temporal bone, which has a complex anatomy with multiple small structures. In this study, we describe the various lesions affecting the EAC.

  12. Semiconductor laser irradiation improves root canal sealing during routine root canal therapy.

    Science.gov (United States)

    Su, Dandan; Hu, Xingxue; Wang, Dashan; Cui, Ting; Yao, Ruyong; Sun, Huibin

    2017-01-01

    To evaluate the effect of semiconductor laser irradiation on root canal sealing after routine root canal therapy (RCT). Sixty freshly extracted single-rooted human teeth were randomly divided into six groups (n = 10). The anatomic crowns were sectioned at the cementoenamel junction and the remaining roots were prepared endodontically with conventional RCT methods. Groups A and B were irradiated with semiconductor laser at 1W for 20 seconds; Groups C and D were ultrasonically rinsed for 60 seconds as positive control groups; Groups E and F without treatment of root canal prior to RCT as negative control groups. Root canal sealing of Groups A, C and E were evaluated by measurements of apical microleakage. The teeth from Groups B, D and F were sectioned, and the micro-structures were examined with scanning electron microscopy (SEM). One way ANOVA and LSD-t test were used for statistical analysis (α = .05). The apical sealing of both the laser irradiated group and the ultrasonic irrigated group were significantly different from the control group (p0.5). SEM observation showed that most of the dentinal tubules in the laser irradiation group melted, narrowed or closed, while most of the dentinal tubules in the ultrasonic irrigation group were filled with tooth paste. The application of semiconductor laser prior to root canal obturation increases the apical sealing of the roots treated.

  13. Semiconductor laser irradiation improves root canal sealing during routine root canal therapy.

    Directory of Open Access Journals (Sweden)

    Dandan Su

    Full Text Available To evaluate the effect of semiconductor laser irradiation on root canal sealing after routine root canal therapy (RCT.Sixty freshly extracted single-rooted human teeth were randomly divided into six groups (n = 10. The anatomic crowns were sectioned at the cementoenamel junction and the remaining roots were prepared endodontically with conventional RCT methods. Groups A and B were irradiated with semiconductor laser at 1W for 20 seconds; Groups C and D were ultrasonically rinsed for 60 seconds as positive control groups; Groups E and F without treatment of root canal prior to RCT as negative control groups. Root canal sealing of Groups A, C and E were evaluated by measurements of apical microleakage. The teeth from Groups B, D and F were sectioned, and the micro-structures were examined with scanning electron microscopy (SEM. One way ANOVA and LSD-t test were used for statistical analysis (α = .05.The apical sealing of both the laser irradiated group and the ultrasonic irrigated group were significantly different from the control group (p0.5. SEM observation showed that most of the dentinal tubules in the laser irradiation group melted, narrowed or closed, while most of the dentinal tubules in the ultrasonic irrigation group were filled with tooth paste.The application of semiconductor laser prior to root canal obturation increases the apical sealing of the roots treated.

  14. Comparison of Bacterial Leakage between 3 Different Root Canal Obturation Techniques in Oval Shaped Canals

    Directory of Open Access Journals (Sweden)

    Eshagh-ali Saberi

    2014-06-01

    Full Text Available Introduction: The purpose of this study was to evaluate the sealing ability of 3 obturation techniques in oval-shaped canals by bacterial leakage assessment. Methods: Sixty mandibular incisors with oval canals were selected after providing buccolingual and mesiodistal radiographs. The teeth were sectioned at a 10 mm distance from the apex. After instrumentation, the teeth were divided into 3 groups and the canals in the three groups were obturated with lateral condensation (G1, warm vertical condensation (G2 and thermoplasticized injectable gutta percha (G3. The teeth were exposed to human saliva. Observing the turbidity of the BHI broth for a period of 63 days the number of days required for the complete contamination of root canals was recorded. The data were analyzed using descriptive statistical methods and Kruskal-Wallis test with SPSS statistical software. Results: Warm vertical condensation (G2 needed a significantly greater average time for leakage than the two other methods. No significant differences were found between lateral condensations and thermoplasticized injectable G.P techniques. Conclusion: warm vertical condensation provides a better seal against bacterial leakage than lateral condensation and obtura II method in obturating oval-canals.

  15. Anterior canal lithiasis: diagnosis and treatment.

    Science.gov (United States)

    Casani, Augusto Pietro; Cerchiai, Niccolò; Dallan, Iacopo; Sellari-Franceschini, Stefano

    2011-03-01

    To describe the clinical and oculographic features in patients with anterior semicircular canal benign paroxysmal positional vertigo and to determine the efficacy of a canalith repositioning procedure for its management. Case series with chart review of patients presenting positional vertigo and positional downbeating nystagmus during a 2-year period. Outpatients' tertiary referral center for balance disorders. Eighteen patients suffering from positional vertigo and presenting positional downbeating nystagmus were treated with a maneuver based on a modification of the procedure proposed by Crevits. disappearance of positional downbeating nystagmus. Positional downbeating nystagmus was elicited unilaterally with the Dix-Hallpike maneuver in 6 cases. In 4 patients, it was triggered by both left and right Dix-Hallpike tests. In 8 patients, the positional nystagmus was elicited by a straight head-hanging maneuver. The positional nystagmus was purely downbeating in 12 patients. In the remaining, a torsional component was detected. After the treatment, only 1 patient showed positional nystagmus at 30 days. In anterior canal benign paroxysmal positional vertigo, the presence of a positional downbeating nystagmus in response to positional tests is key for diagnosis. In a significant number of patients, the affected side may not be detected because of the inconstant presence of a torsional component. Treatment with a simplified maneuver based on Crevits's technique can be considered an effective method for the treatment of anterior canal lithiasis, especially when the affected side cannot be detected clearly.

  16. Measuring Quality of Life in Stroke Subjects Receiving an Implanted Neural Prosthesis for Drop Foot

    NARCIS (Netherlands)

    Kottink, Anke I.; IJzerman, Maarten Joost; Hermens, Hermanus J.; Groothuis-Oudshoorn, Catharina Gerarda Maria; Kottink, A.I.R.

    2010-01-01

    The aim was to determine if the treatment of a drop foot by means of an implantable two-channel peroneal nerve stimulator improves health-related quality of life (HRQoL). All subjects were measured at baseline and after a follow-up period of 12 and 26 weeks. Twenty-nine stroke survivors with chronic

  17. The relationship between prosthesis use, phantom pain and psychiatric symptoms in male traumatic limb amputees.

    Science.gov (United States)

    Durmus, Dilek; Safaz, Ismail; Adıgüzel, Emre; Uran, Ayça; Sarısoy, Gökhan; Goktepe, Ahmet Salim; Tan, Arif Kenan

    2015-05-01

    The purpose of this study was to identify psychiatric symptoms by comparing male patients with traumatic leg amputations (LAs) with healthy controls and to determine the association between these psychiatric symptoms and phantom pain and prosthesis use characteristics. One hundred four volunteers, 51 LA patients (group 1) and 53 healthy controls (group 2) were included. Demographic data including age, height, weight, time since amputation, duration of prosthesis use, and Satisfaction with Prosthesis Questionnaire scores were recorded. Phantom pain was measured a visual analog scale (VAS). Psychiatric symptoms were measured using the Symptom Checklist-90-R, Beck Depression Inventory, Pittsburgh Sleep Quality Index, Rosenberg Self-Esteem Scale, and State-Trait Anxiety Inventory. Correlations were determined between time since amputation, duration of prosthesis use and satisfaction with prosthesis questionnaire scores and psychiatric scale scores. Amputee patients had higher phobic anxiety, state anxiety, trait anxiety and sleep disturbance scores (p0.05). There were significant negative correlations between time since amputation, duration of prosthesis use, duration of daily prosthesis use, and satisfaction with prosthesis questionnaire scores and psychiatric symptoms. Apart from anxiety (state, trait or phobic) and disturbed sleep, other psychiatric symptoms in amputee patients undergoing lengthy prosthetic rehabilitation may not differ from those of healthy controls. The presence and severity of phantom pain appear to be unrelated to general psychiatric symptomatology. Length of time since amputation, length of prosthesis use, daily length of prosthesis use and prosthesis satisfaction are negatively correlated with general psychiatric symptoms. These characteristics must be borne in mind in psychiatric and prosthetic rehabilitation. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Microfabrication of an Implantable silicone Microelectrode array for an epiretinal prosthesis

    Energy Technology Data Exchange (ETDEWEB)

    Maghribi, Mariam Nader [Univ. of California, Davis, CA (United States)

    2003-06-10

    Millions of people suffering from diseases such as retinitis pigmentosa and macular degeneration are legally blind due to the loss of photoreceptor function. Fortunately a large percentage of the neural cells connected to the photoreceptors remain viable, and electrical stimulation of these cells has been shown to result in visual perception. These findings have generated worldwide efforts to develop a retinal prosthesis device, with the hope of restoring vision. Advances in microfabrication, integrated circuits, and wireless technologies provide the means to reach this challenging goal. This dissertation describes the development of innovative silicone-based microfabrication techniques for producing an implantable microelectrode array. The microelectrode array is a component of an epiretinal prosthesis being developed by a multi-laboratory consortium. This array will serve as the interface between an electronic imaging system and the human eye, directly stimulating retinal neurons via thin film conducting traces. Because the array is intended as a long-term implant, vital biological and physical design requirements must be met. A retinal implant poses difficult engineering challenges due to the size of the intraocular cavity and the delicate retina. Not only does it have to be biocompatible in terms of cytotoxicity and degradation, but it also has to be structurally biocompatible, with regard to smooth edges and high conformability; basically mimicking the biological tissue. This is vital to minimize stress and prevent physical damage to the retina. Also, the device must be robust to withstand the forces imposed on it during fabrication and implantation. In order to meet these biocompatibility needs, the use of non-conventional microfabrication materials such as silicone is required. This mandates the enhancement of currently available polymer-based fabrication techniques and the development of new microfabrication methods. Through an iterative process, devices

  19. Environmental pollution and shipping feasibility of the Nicaragua Canal.

    Science.gov (United States)

    Chen, Jihong; Zeng, Xin; Deng, Yibing

    2016-12-15

    In recent years, the Nicaraguan government's renewed interest in constructing this interoceanic canal has once again aroused widespread concern, particularly in the global shipping industry. The project's immense ecological risks, coupled with the recent expansions of both the Panama Canal and the Suez Canal, have raised questions among scientists and experts about its viability. Whether the Nicaragua Canal is really feasible for international shipping, given its high marine pollution risks, requires the further study. This paper discusses and analyses the feasibility of the Nicaragua Canal in the context of its environmental impact and value as a shipping service. This paper aims to provide an important information reference to inform strategic decision-making among policymakers and stakeholders. Our research results indicate that the environmental complexity, economic costs and safety risks of building a new transoceanic canal are simply too high to justify the project. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Root canal filling evaluation using optical coherence tomography

    Science.gov (United States)

    Negrutiu, Meda L.; Sinescu, Cosmin; Hughes, Michael; Bradu, Adrian; Todea, Carmen; Balabuc, Cosmin I.; Filip, Laura M.; Podoleanu, Adrian Gh.

    2008-04-01

    The root canal fillings are destined to seal the root canal especially in the apical areea. Invasive techniques are known which are used to assess the quality of the seal. These lead to the destruction of the probes and often no conclusion could be drawn in respect to the existence of any microleakage in the investigated areas of interest. Optical coherence tomography (OCT) is a relatively novel non-invasive imaging technique which presents potential in assessing the microleakage of the apical area in the root canal fillings with micron depth resolution. 3D reconstruction allows a complete view with obvious display of gaps in the apical root canal filling. For this study, 30 monoradicular teeth were prepared by conventional and rotative methods. Afterwards, root canal fillings were produced in each tooth. The images obtained show some microleakage in all the investigated root canal fillings. The advantages of the OCT method consist in non-invasiveness and high resolution.

  1. Canal of Nuck hernia: a multimodality imaging review

    Energy Technology Data Exchange (ETDEWEB)

    Rees, Mitchell A. [University of Pittsburgh Medical Center, Department of Radiology, Pittsburgh, PA (United States); Squires, James E. [Children' s Hospital of Pittsburgh of UPMC, Department of Gastroenterology, Pittsburgh, PA (United States); Tadros, Sameh; Squires, Judy H. [University of Pittsburgh Medical Center, Department of Radiology, Pittsburgh, PA (United States); Children' s Hospital of Pittsburgh of UPMC, Department of Radiology, Pittsburgh, PA (United States)

    2017-07-15

    Canal of Nuck abnormalities are a rare but important cause of morbidity in girls, most often those younger than 5 years of age. The canal of Nuck, which is the female equivalent of the male processus vaginalis, is a protrusion of parietal peritoneum that extends through the inguinal canal and terminates in the labia majora. The canal typically obliterates early in life, but in some cases the canal can partially or completely fail to close, potentially resulting in a hydrocele or hernia of pelvic contents. Recognition of this entity is especially important in cases of ovarian hernia due to the risk of incarceration and torsion. We aim to increase awareness of this condition by reviewing the embryology, anatomy and diagnosis of canal of Nuck disorders with imaging findings on US, CT and MRI using several cases from a single institution. (orig.)

  2. Single visit root canal treatment: A prospective study

    African Journals Online (AJOL)

    2013-08-31

    Aug 31, 2013 ... Post‑operative pain in multiple‑visit and single‑visit root canal treatment. J Endod 2010;36:36‑9. 13. Ferranti P. Treatment of the root canal of an infected tooth in one appointment: A report of 340 cases. Dent Dig 1959;65:49‑53. 14. Ufomata D. One‑visit root canal therapy: A preliminary clinical study in ...

  3. Three root canals in the maxillary second premolar

    Directory of Open Access Journals (Sweden)

    de Almeida-Gomes Fabio

    2009-01-01

    Full Text Available In this study, we report an endodontic treatment of the maxillary second premolar with three root canals and distinct foramens. The possibility of three root canals in this tooth is quite small; however, it must be taken into account in clinical and radiographic evaluation during endodontic treatment. Many times, their presence is noticed only after canal treatment due to continuing post-operative discomfort.

  4. Micro-Machined Flow Sensors Mimicking Lateral Line Canal Neuromasts

    OpenAIRE

    Hendrik Herzog; Siegfried Steltenkamp; Adrian Klein; Simon Tätzner; Elisabeth Schulze; Horst Bleckmann

    2015-01-01

    Fish sense water motions with their lateral line. The lateral line is a sensory system that contains up to several thousand mechanoreceptors, called neuromasts. Neuromasts occur freestanding on the skin and in subepidermal canals. We developed arrays of flow sensors based on lateral line canal neuromasts using a biomimetic approach. Each flow sensor was equipped with a PDMS (polydimethylsiloxane) lamella integrated into a canal system by means of thick- and thin-film technology. Our artificia...

  5. A Fixed Telescopic Prosthesis Designed to Retrieve and Convert to Fixed-Removable Combination Case: A Clinical Report.

    Science.gov (United States)

    Zoidis, Panagiotis; Panagiota, Spyropoulou; Polyzois, Gregory

    2015-06-01

    This clinical report describes a fixed maxillary telescopic dental prosthesis (FTDP) employing milled base metal copings and a metal superstructure veneered with composite resin, for the restoration in a periodontally compromised patient with uncontrolled diabetes. The telescopic prosthesis framework design incorporated occlusal rest seats in key positions along the arch in case of future posterior tooth loss, in order to be converted to fixed - removable combination prosthesis. The mandible was restored with a conventional fixed ceramo-metal dental prosthesis.

  6. [Canal infection. Ecological theory and repair with osteodentin].

    Science.gov (United States)

    Muñiz, M A; Zeberio, T

    1991-01-01

    The characteristics of the infection in the root canal are analyzed, specially its development before pulpal necrosis. It is inferred that it is an ecological infection with a function: to decompose the necrosis. Inactivating the infection in the canal by the formocresol technique, calcium hidroxide or with the conventional basic treatment in Endodontics, cleaning, washing, disinfecting and, in this case, with partial obturation of the canal, it is possible to induce a reparation with osteodentine that can cover all the free extension of the canal.

  7. Neural Tube Defects

    Science.gov (United States)

    ... vitamin, before and during pregnancy prevents most neural tube defects. Neural tube defects are usually diagnosed before the infant is ... or imaging tests. There is no cure for neural tube defects. The nerve damage and loss of function ...

  8. Long-term follow-up of stentless prosthesis.

    Science.gov (United States)

    Sansone, Fabrizio; Dato, Guglielmo Mario Actis; Zingarelli, Edoardo; Ferrero, Emanuele; Prot, Sara; Ceresa, Fabrizio; Patanè, Francesco; Casabona, Riccardo

    2014-05-01

    Stentless prostheses have an interesting hemodynamic performance when compared to stented prostheses and are recommended in cases of small aortic annulus. From January 1996 to January 2004, 138 patients suffering from aortic disease, underwent aortic valve replacement. • Group A: 93 patients underwent stentless aortic valve implantation [stentless Biocor (Biocor Industria e Pesguisa Ltda, Belo Horizonte, Brazil) and stentless Sorin (Sorin Group, Saluggia, Italy)]. • Group B: 45 patients underwent stented aortic valve implantation (stented Biocor). Patients were assessed by clinical evaluation and echocardiography after a mean follow up of 124.5 ± 58.2 months. There was a significant difference in terms of time of extracorporeal circulation and aortic cross clamp. The actuarial survival at 4, 8, 12, and 15 years is 77%, 50%, 21%, and 18%, respectively. Freedom from reoperation at 4, 8, 12, and 14 years was 92%, 83%, 73%, and 63%, respectively. Freedom from all events, death, and reoperation at 4, 8, 12, and 14 years was 70%, 39%, 13%, and 8%, respectively. There is no statistical difference among the two groups in terms of actuarial survival, freedom from reoperation, and freedom from re-hospitalization for prosthesis-related causes. There was a significantly higher incidence of pacemaker implantation in Group A and the causes are not known. The rate of freedom from reoperation is high in both groups for the patients who remained alive. There was no statistical difference about prosthesis dysfunction between the two groups. The higher incidence of death in Group A cannot be explained by causes related to the prosthesis because there is no difference in terms of causes of death. Rates of reoperation did not differ between the two groups. The results obtained with stentless prostheses are encouraging even in long-term follow-up. Copyright © 2013 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

  9. One-stage microvascular mandible reconstruction and alloplastic TMJ prosthesis.

    Science.gov (United States)

    Landes, Constantin; Korzinskas, Tadas; Dehner, Jan-Friedrich; Santo, Gregor; Ghanaati, Shahram; Sader, Robert

    2014-01-01

    Severely deformed or absent temporomandibular joints (TMJ) benefit from total alloplastic joint replacement and large mandibular defects from revascularized free tissue transfer for reconstruction. However no cases of their combined one-stage placement with outcomes can be found in the literature. We present two cases with different indications and reconstruction. The first patient required mandibular body and ascending ramus reconstruction after previous sarcoma resection. This was with a condyle-bearing reconstruction plate which resulted in significant dysfunction, leaving the patient unable to open her mouth. A one-stage vascularized iliac crest free flap and alloplastic TMJ prosthesis was used to reconstruct the mandible. Subsequently, metal removal, soft tissue augmentation by lipotransfer and dental implant placement were performed. At 63 months follow-up patient was pain-free, with mouth opening, protrusion and lateral excursion back to normal. The second patient required mandibular body, ascending ramus and joint reconstruction, performed by transoral vascularized fibula free flap with temporal vessel anastomosis. The traumatic deep bite and posterior facial height were corrected, additional submandibular scars avoided by transoral placement of the fibula transplant and a miniaturized TMJ prosthesis along with the vascularised free flap with 28 months follow-up. A miniaturized TMJ prosthesis may become placed transorally for reconstruction of the TMJ, together with a vascularized free flap for mandibular reconstruction and promises good long-term stability with normal function above all for protrusion and lateral excursion. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  10. Endoscopic management of eroded prosthesis in vertical banded gastroplasty patients.

    Science.gov (United States)

    Karmali, Shahzeer; Snyder, Brad; Wilson, Erik B; Timberlake, Matthew D; Sherman, Vadim

    2010-01-01

    One of the major complications of applying a prosthetic device to facilitate gastric partitioning has been intraluminal erosion of the prosthesis. Removing an eroded gastric band is fraught with difficulty secondary to the extensive inflammatory response around the proximal stomach and left lobe of the liver. As a result, bariatric clinicians have attempted to apply endoscopic technology to facilitate removal of eroded gastric prostheses. Our study reports on our experience of applying endoscopic scissor transection to remove eroded gastric prostheses in a large tertiary-care medical center. A retrospective chart review was conducted to identify all adult (>18 years old) patients managed endoscopically for removal of eroded prosthesis post bariatric surgery at the Baylor College of Medicine Comprehensive Bariatric Surgery Center and the University of Texas-Houston Bariatric Surgery Program. Nine patients, mean body mass index (BMI) 39.5 +/- 7.3 kg/m(2), were managed endoscopically to remove eroded gastric prosthesis post vertical banded gastroplasty. All patients (9/9) reported symptoms consistent with a proximal gastric outlet obstruction (dysphagia, nausea, vomiting). Inadequate weight loss was reported by 67% (6/9) of patients. The mean time for endoscopic band removal was 28.0 +/- 8.8 min. All eroded bands were evident at the end of the gastric pouch and were visualized with either a normal or retroflexed endoscopic view. All nine patients were discharged the same day of their procedure. Mean follow-up of the patients was 9.7 weeks (1-30 weeks). Three patients underwent revisional bariatric surgery following the band removal. Our study demonstrates that endoscopic scissor transaction is a safe and effective modality in removing eroded gastric prostheses after vertical banded gastroplasty and avoids the pitfalls associated with removing the eroded bands surgically. It also allows the patient and surgeon to make an insightful decision regarding a revisional

  11. Aortic valve prosthesis-patient mismatch and exercise capacity in adult patients with congenital heart disease

    NARCIS (Netherlands)

    van Slooten, Ymkje J.; Melle, van Joost P.; Freling, Hendrik G.; Bouma, Berto J.; van Dijk, Arie P. J.; Jongbloed, Monique R. M.; Post, Martijn C.; Sieswerda, Gertjan T.; in 't Veld, Anna Huis; Ebels, Tjark; Voors, Adriaan A.; Pieper, Petronella G.

    Objectives To report the prevalence of aortic valve prosthesis patient mismatch (PPM) in an adult population with congenital heart disease (CHD) and its impact on exercise capacity. Adults with congenital heart disease (ACHD) with a history of aortic valve replacement may outgrow their prosthesis

  12. Design, fabrication, and preliminary results of a novel below knee prosthesis for snowboarding : A case report

    NARCIS (Netherlands)

    Minnoye, A.L.M.; Plettenburg, D.H.

    2010-01-01

    Snowboarding with a below-knee prosthesis is compromised by the limited rotation capabilities of the existing below-knee prostheses, which are designed for use in normal walking. Based on snowboarding range of motion analyses, a novel below-knee prosthesis was designed with the aim to achieve

  13. Biomedical and psychosocial factors influencing transtibial prosthesis fit : a Delphi survey among health care professionals

    NARCIS (Netherlands)

    Baars, Erwin C.; Schrier, Ernst; Geertzen, Jan H.; Dijkstra, Pieter U.

    2015-01-01

    Purpose: We aimed to reach consensus among professionals caring for prosthesis users, on definitions of biomedical and psychosocial factors, to assess their influence on fit of transtibial prosthesis and to identify new factors. Method: A three-round, internet-based, Delphi survey was conducted

  14. 21 CFR 874.3540 - Prosthesis modification instrument for ossicular replacement surgery.

    Science.gov (United States)

    2010-04-01

    ... replacement surgery. 874.3540 Section 874.3540 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... § 874.3540 Prosthesis modification instrument for ossicular replacement surgery. (a) Identification. A prosthesis modification instrument for ossicular replacement surgery is a device intended for use by a...

  15. A multichannel sEMG method for myoelectric control of a forearm prosthesis

    NARCIS (Netherlands)

    van Baal, D.W.; van Baal, D.W.; Muijzer-Witteveen, Heintje Johanna Berendina; Kallenberg, L.A.C.; Hermens, Hermanus J.; Rietman, Johan Swanik; Veltink, P.H.; Eberle, W.

    2009-01-01

    A large number of amputee patients doesn't use their myoelectric prosthesis, mainly due to the limited functionality of the prosthesis. The aim of this study was to investigate if it is possible to distinguish 8 different contractions by using multi-electrode sEMG. We analysed sEMG signals of a grid

  16. Microbial contamination of removable dental prosthesis at different interval of usage: An in vitro study

    National Research Council Canada - National Science Library

    Nair, VijitaVijay; Karibasappa, GN; Dodamani, Arun; Prashanth, VK

    2016-01-01

    ... the quality of life. Though development of implant prosthesis has increased recently, the demand for partial and full dentures is still very high. For those who cannot afford fixed dentures due to very small amount of teeth left, as well as for financial reasons, a removable dental prosthesis remains the only viable solution.[3],[4] Complete den...

  17. Development of a cosmetic knee disarticulation prosthesis : A single-patient case study

    NARCIS (Netherlands)

    de Laat, Fred A.; de Vos, Wouter; Geertzen, Jan; Roorda, Leo D.

    2015-01-01

    Background and aim: If a person does not become ambulant after an amputation, a knee disarticulation (KD) shouldbe considered and the person may then benefit from a cosmetic KD prosthesis. The features of a cosmetic KD prosthesis are, however, seldom described. The aim of this clinical note is to

  18. 21 CFR 888.3590 - Knee joint tibial (hemi-knee) metallic resurfacing uncemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint tibial (hemi-knee) metallic resurfacing... Knee joint tibial (hemi-knee) metallic resurfacing uncemented prosthesis. (a) Identification. A knee joint tibial (hemi-knee) metallic resurfacing uncemented prosthesis is a device intended to be implanted...

  19. 21 CFR 888.3500 - Knee joint femorotibial metal/composite semi-constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint femorotibial metal/composite semi... § 888.3500 Knee joint femorotibial metal/composite semi-constrained cemented prosthesis. (a) Identification. A knee joint femorotibial metal/composite semi-constrained cemented prosthesis is a two-part...

  20. 21 CFR 888.3530 - Knee joint femorotibial metal/polymer semi-constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint femorotibial metal/polymer semi... § 888.3530 Knee joint femorotibial metal/polymer semi-constrained cemented prosthesis. (a) Identification. A knee joint femorotibial metal/polymer semi-constrained cemented prosthesis is a device intended...

  1. 21 CFR 888.3540 - Knee joint patellofemoral polymer/metal semi-constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint patellofemoral polymer/metal semi... § 888.3540 Knee joint patellofemoral polymer/metal semi-constrained cemented prosthesis. (a) Identification. A knee joint patellofemoral polymer/metal semi-constrained cemented prosthesis is a two-part...

  2. 21 CFR 888.3550 - Knee joint patellofemorotibial polymer/metal/metal constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint patellofemorotibial polymer/metal/metal... § 888.3550 Knee joint patellofemorotibial polymer/metal/metal constrained cemented prosthesis. (a) Identification. A knee joint patellofemorotibial polymer/metal/metal constrained cemented prosthesis is a device...

  3. 21 CFR 888.3580 - Knee joint patellar (hemi-knee) metallic resurfacing uncemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint patellar (hemi-knee) metallic... § 888.3580 Knee joint patellar (hemi-knee) metallic resurfacing uncemented prosthesis. (a) Identification. A knee joint patellar (hemi-knee) metallic resurfacing uncemented prosthesis is a device made of...

  4. 21 CFR 888.3565 - Knee joint patellofemorotibial metal/polymer porous-coated uncemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint patellofemorotibial metal/polymer... Devices § 888.3565 Knee joint patellofemorotibial metal/polymer porous-coated uncemented prosthesis. (a) Identification. A knee joint patellofemorotibial metal/polymer porous-coated uncemented prosthesis is a device...

  5. 21 CFR 888.3490 - Knee joint femorotibial metal/composite non-constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Knee joint femorotibial metal/composite non... § 888.3490 Knee joint femorotibial metal/composite non-constrained cemented prosthesis. (a) Identification. A knee joint femorotibial metal/composite non-constrained cemented prosthesis is a device...

  6. 21 CFR 888.3200 - Finger joint metal/metal constrained uncemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Finger joint metal/metal constrained uncemented... metal/metal constrained uncemented prosthesis. (a) Identification. A finger joint metal/metal... Administration on or before December 26, 1996 for any finger joint metal/metal constrained uncemented prosthesis...

  7. 21 CFR 888.3220 - Finger joint metal/polymer constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Finger joint metal/polymer constrained cemented... metal/polymer constrained cemented prosthesis. (a) Identification. A finger joint metal/polymer..., 1996 for any finger joint metal/polymer constrained cemented prosthesis that was in commercial...

  8. 21 CFR 888.3210 - Finger joint metal/metal constrained cemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Finger joint metal/metal constrained cemented... metal/metal constrained cemented prosthesis. (a) Identification. A finger joint metal/metal constrained..., 1996 for any finger joint metal/metal constrained cemented prosthesis that was in commercial...

  9. Mandibular second premolar with three canals: Re-treatment of a case with unusual root canal anatomy

    Directory of Open Access Journals (Sweden)

    Niranjan Desai

    2011-01-01

    Full Text Available A thorough knowledge of root canal anatomy along with the anatomical variations that may be present is essential for success of endodontic therapy. Unusual presentations in the number of the roots or the canals should be expected in every tooth. Mandibular second premolars are thought of as having a single root and canal. Studies have stated that the prevalence of three canals with three orifices in this tooth is 0.4%. The mandibular second premolar is particularly difficult to treat owing to the fact that a wide variation in the number, location and curvature of the roots and canals exist. Added to this is the fact that the access opening is restricted and location of the lingually placed orifices is difficult. This case report details the re-treatment of a mandibular second premolar with three canals and three separate orifices using the surgical microscope.

  10. A "self adhering" prosthesis for hernia repair: experimental study.

    Science.gov (United States)

    Champault, G; Polliand, C; Dufour, F; Ziol, M; Behr, L

    2009-02-01

    Prosthetic reinforcement is now routine in the management of inguinal and incisional hernia, and it significantly reduces the risk of recurrence. After surgery, chronic pain is often attributed to the characteristics of the mesh and to the method of fixation in the wound, with a potential risk of nerve or muscle injuries. To evaluate the properties of a new "self adhering" prosthesis in an experimental animal study. The self adhering prosthesis, a lightweight (40 mg/m(2)) polypropylene mesh coated with a synthetic glue on one side, was implanted laparoscopically in pigs. Removal of the prosthesis was performed at one day, one week and one month post operatively. A macroscopic and microscopic evaluation was performed. The results, using a quantitative score, were compared to those of a control group using the same polypropylene mesh without glue, but fixed by staples. The operative time was significantly lower in the self adhering group: 23 min (15-32) versus 31 min (21-40) (P = 0.01). The average time interval from the introduction of the mesh into the preperitoneal space until the appearance of the first tough adhesion was 3 min (2-4). In the control group, the mesh handling time was 8.3 min (5-14) (P = 0.01). At the time of implantation, the score was at a maximum value in all cases for the self adhering prostheses, especially concerning handling and adhesiveness. Upon removal, this score was noted to be good or very good in 90-100% of the cases. There was a good integration in the muscle confirmed histologically, and there was no shrinkage, no mobilisation and no migration. At one month, the thickness of the fibrosis at the limits of the meshes was significantly higher for the self adhering prostheses (P = 0.02). In this experimental study, the self adhering prosthesis demonstrated its adhesive properties and its ability to be well tolerated, with a good macroscopic and microscopic integration into the abdominal wound. This should allow us to perform a clinical

  11. Definitive magnetic nasal prosthesis for partial nasal defect

    Directory of Open Access Journals (Sweden)

    E Nagaraj

    2011-01-01

    Full Text Available Maxillofacial trauma refers to any injury to the face or jaw caused by physical force, trauma, the presence of foreign objects, animal or human bites, and burns. Facial defects can be devastating in their impact on physical structure and function of the affected individual, leading to potential compromises in quality of life. Restoration of facial defects, especially nasal defects, is a difficult challenge for both the surgeon and the prosthodontist. Here is a case report of partial nasal defect caused by trauma, rehabilitated with a magnetic nasal prosthesis made with silicone elastomers using mechanical and anatomical retentive aids.

  12. Engineering Design of an Adaptive Leg Prosthesis Using Biological Principles

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Dentel, Andy; Invarsdottir, Thorunn

    2010-01-01

    The biomimetic design process is explored through a design case: An adaptive leg prosthesis. The aim is to investigate if the biomimetic design process can be carried out with a minimum of biological knowledge and without using advanced design methods. In the design case biomimetic design was suc...... was successfully carried out using library search resulting in 14 biological analogies for the design problem 'shape adaption'. It is proposed that search results are handled using special cards describing the biological phenomena and the functional principles....

  13. Histologic analysis of a retrieved hydroxyapatite-coated femoral prosthesis

    DEFF Research Database (Denmark)

    Søballe, K; Gotfredsen, K; Brockstedt-Rasmussen, H

    1991-01-01

    A hydroxyapatite-coated hip hemi-prosthesis was retrieved from a 98-year-old osteoporotic woman 12 weeks after implantation. Histologic analysis revealed bone and fibrous tissue almost evenly distributed around the surface of the implant circumference. Quantitative histologic analysis showed...... that 48% of the hydroxyapatite surface was covered by bone. Fibrous tissue covered 30% of the prosthetic surface, and 20% of the surface had no tissue coverage. Scanning electron microscopy showed direct contact without any clear boundary between the newly formed bone and the hydroxyapatite ceramic....

  14. Rupture of an expander prosthesis mimics axillary cancer recurrence.

    LENUS (Irish Health Repository)

    Ismael, T

    2005-10-01

    Regional silicone gel migration from a ruptured breast implant has been reported at different locations including the upper extremity, chest wall muscles, axilla and back. We report a patient who presented with an axillary mass that mimicked a regional recurrence 5 years after breast cancer reconstruction with a latissimus dorsi musculocutaneous flap and silicon gel expander-prosthesis. Surgical exploration revealed that the mass contained silicone gel around the port of the breast expander that had ruptured. The mass was confluent with an intracapsular silicone leak through a tract along the tube of the expander port.

  15. Potential of an electric prosthesis for dynamic facial reanimation.

    Science.gov (United States)

    Griffin, Garrett R; Kim, Jennifer C

    2011-09-01

    Chronic facial paralysis is a devastating condition with severe functional and emotional consequences. The current surgical armamentarium permits the predictable reestablishment of a protective blink as well as good resting symmetry. Yet the ultimate goal of symmetric, spontaneous emotional expression remains elusive despite significant progress in the areas of peripheral nerve grafting and free tissue transfer. This commentary explores the possibility of an implantable electrical prosthesis for facial reanimation. It reviews animal studies supporting this concept as well as recent human data suggesting that such an implant could rescue denervated facial musculature, thus overcoming a major hurdle for existing reanimation techniques.

  16. Customised attachments retained cheek plumper prosthesis: a case report.

    Science.gov (United States)

    Keni, Nandita N; Aras, Meena A; Chitre, Vidya

    2012-09-01

    Emphasis on facial esthetics has become an integral part of dental treatment. Prosthetic rehabilitation of a completely edentulous patient no longer confines to only replacement of missing teeth. Patients are increasingly demanding improvement in esthetics at the end of treatment. Slumped or hollow cheeks can add years to a person's age. This article has described a simple, effective and noninvasive treatment alternative to improve facial appearance in a completely edentulous patient with hollow cheeks by making use of detachable plumper prosthesis using customised attachments.

  17. An implant versus a conventional fixed prosthesis: a case report.

    Science.gov (United States)

    Windhorn, Richard J; Cuenin, Michael F

    2007-01-01

    The success of endosseous implant dentistry is widely acknowledged. Clinical research and subsequent innovations with both surgical and restorative techniques--as well as improved surface features and restorative components--have made endosseous dental implants a routinely accepted dental treatment modality. Patients and referring clinicians often specifically request dental implant therapy. This article presents an example of such a patient; however, in this case, a surgical ridge augmentation and fabrication of a conventional fixed prosthesis was selected as the treatment modality. The authors believe that all therapeutic modalities should be considered when adapting appropriate treatment plans for individual patients.

  18. Seeing the light: a photonic visual prosthesis for the blind

    Science.gov (United States)

    Degenaar, Patrick; Grossman, Nir; McGovern, Brian; Neil, Mark; Drakakis, Emmanuel; Nikolic, Konstantin

    2009-02-01

    This paper highlights how the genetic incorporation of artificial opsins into the retina can lead to a new class of retinal prosthesis. We demonstrate the efficacy of incorporating channelrhodopsin into neuron cells in-vitro and show how that can be scaled to in-vivo. We show that we need typically 100mW/cm2 of instantaneous light intensity on the neuron in order to stimulate action potentials which results in 10W/cm2 required from the light source. We thus use GaN LED arrays to provide spatially controlled stimulation which is of sufficient brightness to stimulate the cells.

  19. Real-time simulation of hand motion for prosthesis control.

    Science.gov (United States)

    Blana, Dimitra; Chadwick, Edward K; van den Bogert, Antonie J; Murray, Wendy M

    2017-04-01

    Individuals with hand amputation suffer substantial loss of independence. Performance of sophisticated prostheses is limited by the ability to control them. To achieve natural and simultaneous control of all wrist and hand motions, we propose to use real-time biomechanical simulation to map between residual EMG and motions of the intact hand. Here we describe a musculoskeletal model of the hand using only extrinsic muscles to determine whether real-time performance is possible. Simulation is 1.3 times faster than real time, but the model is locally unstable. Methods are discussed to increase stability and make this approach suitable for prosthesis control.

  20. Structural valve deterioration in the Mitroflow biological heart valve prosthesis

    DEFF Research Database (Denmark)

    Issa, Issa Farah; Poulsen, Steen Hvitfeldt; Waziri, Farhad

    2018-01-01

    OBJECTIVES: Concern has been raised regarding the long-term durability of the Mitroflow biological heart valve prosthesis. Our aim was to assess the incidence of structural valve degeneration (SVD) for the Mitroflow bioprosthesis in a nationwide study in Denmark including all patients alive...... in Denmark who had received a Mitroflow aortic bioprosthesis since 2000. METHODS: Patients alive in Denmark with a Mitroflow bioprosthesis implanted since January 2000 were invited to participate in a nationwide cross-sectional study with a predefined definition of SVD. Of 1552 patients, 861 patients had...

  1. Amputation and prosthesis implantation shape body and peripersonal space representations

    OpenAIRE

    Canzoneri, Elisa; Marzolla, Marilena; Amoresano, Amedeo; Verni, Gennaro; Serino, Andrea

    2013-01-01

    Little is known about whether and how multimodal representations of the body (BRs) and of the space around the body (Peripersonal Space, PPS) adapt to amputation and prosthesis implantation. In order to investigate this issue, we tested BR in a group of upper limb amputees by means of a tactile distance perception task and PPS by means of an audio-tactile interaction task. Subjects performed the tasks with stimulation either on the healthy limb or the stump of the amputated limb, while wearin...

  2. Rehabilitation of orbital cavity after orbital exenteration using polymethyl methacrylate orbital prosthesis

    Directory of Open Access Journals (Sweden)

    Sumeet Jain

    2016-01-01

    Full Text Available Squamous cell carcinoma of the eyelid is the second most common malignant neoplasm of the eye with the incidence of 0.09 and 2.42 cases/100 000 people. Orbital invasion is a rare complication but, if recognized early, can be treated effectively with exenteration. Although with advancements in technology such as computer-aided design and computer-aided manufacturing, material science, and retentive methods like implants, orbital prosthesis with stock ocular prosthesis made of methyl methacrylate retained by anatomic undercuts is quiet effective and should not be overlooked and forgotten. This clinical report describes prosthetic rehabilitation of two male patients with polymethyl methacrylate resin orbital prosthesis after orbital exenteration, for squamous cell carcinoma of the upper eyelid. The orbital prosthesis was sufficiently retained by hard and soft tissue undercuts without any complications. The patients using the prosthesis are quite satisfied with the cosmetic results and felt comfortable attending the social events.

  3. Prosthesis infections after orthopedic joint replacement: the possible role of bacterial biofilms

    Directory of Open Access Journals (Sweden)

    Zhijun Song

    2013-06-01

    Full Text Available Prosthesis-related infection is a serious complication for patients after orthopedic joint replacement, which is currently difficult to treat with antibiotic therapy. Consequently, in most cases, removal of the infected prosthesis is the only solution to cure the infection. It is, therefore, important to understand the comprehensive interaction between the microbiological situation and the host immune responses that lead to prosthesis infections. Evidence indicates that prosthesis infections are actually biofilm-correlated infections that are highly resistant to antibiotic treatment and the host immune responses. The authors reviewed the related literature in the context of their clinical experience, and discussed the possible etiology and mechanism leading to the infections, especially problems related to bacterial biofilm, and prophylaxis and treatment of infection, including both microbiological and surgical measures. Recent progress in research into bacterial biofilm and possible future treatment options of prosthesis-related infections are discussed.

  4. Revestimientos especiales para diques y canales

    Directory of Open Access Journals (Sweden)

    Zorzi, Silvano

    1964-11-01

    Full Text Available This paper summarizes the possibilities and advantages of adopting special facings for dykes and canals, and generally for all large hydraulic works, where waterproofing is of paramount importance. Technical advances in recent years have made it possible to prefabricate many facing units used in these types of works; large slabs, made in reinforced and prestressed concrete, are flexible, and watertight. Although there are many possibilities and types of facing treatments, the one described here is outstanding. It consists of narrow slabs, highly flexible, placed transversally with respect to the canal axis. They are attached with cement mortar, and the joints are finally sealed with a special mortar, called «Emboco». In this article a description is also given of a series of projects, where facing treatments have been used, which are now successfully in service. Finally some general and simple advise is given on the best procedure to apply these facing treatments in the most effective and economic manner.En este trabajo se resumen las posibilidades y ventajas que ofrecen los revestimientos especiales de diques y taludes de canales y, en general, en todas las grandes obras hidráulicas, en que la impermeabilización es de mayor importancia al tratar de conservar los caudales iniciales o la retención de aguas embalsadas, según los casos. Los progresos de las técnicas modernas, en particular la prefabricación, han permitido este tipo de revestimientos con losas de gran longitud, extremadamente flexibles e impermeables, de hormigón armado y pretensado. Aunque son muchas las posibilidades y tipos de revestimiento, destaca el que a continuación se expone: consiste en placas o losas estrechas, de gran flexibilidad, colocadas transversalmente al eje del canal sobre tongadas de mortero de cemento, y cuyas juntas se sellan, finalmente, con un mortero especial llamado «Emboco». Complementan la exposición teórica del método una serie de

  5. Three distal root canals in mandibular first molar with different canal configurations: Report of two cases and literature review

    Directory of Open Access Journals (Sweden)

    Parul Bansal

    2015-01-01

    Full Text Available With the increasing number of reports of aberrant root canal morphology, the clinician needs to be aware of the variable anatomy. Various case reports have been published with the finding of middle mesial canal in mandibular first molar, however finding of three distal canals in distal roots of mandibular first molar is rare. This article reports endodontic management of two mandibular first molars presented with three distal canals present in a single distal root (Sert and Bayirli type XVIII and distal and distolingual root.

  6. Axial penile rigidity influences patient and partner satisfaction after penile prosthesis implantation

    Directory of Open Access Journals (Sweden)

    Abdulla Al Ansari

    2013-09-01

    Full Text Available Introduction: Penile prosthesis implantation is one of the treatment choices that is kept for patients who were not satisfied with other treatments. Although penile prosthesis satisfaction rates are higher, there are some dissatisfied patients. The patients’ reasons are mostly shortness and softness of implanted prosthesis. It was previously demonstrated that penile axial rigidity of more than 500 grams is enough for successful vaginal intromission. To our knowledge, there is no study comparing axial rigidity of penile prosthesis and satisfaction. Objectives: The aim of this study was to examine whether axial rigidity of penile prosthesis had impact on patient and partner satisfaction. Materials and Methods: We enrolled one hundred patients who were implanted penile prosthesis before to evaluate their penile axial rigidity. We used Rigidometry (by using the digital inflection rigidometer to assess the minimal axial pressure to bend the implanted penis. Results: We demonstrated that mean axial pressure to bend the implanted penis was 984.8 ± 268.7 grams. Overall satisfaction score with the penile prosthesis implant was 4.55 and 4.49 (out of 5 in patients and partners, respectively. In total, seven men were unsatisfied with their implant and reported a mean satisfaction score of 0.6 ± 0.48 (out of 5. All prostheses types showed good and more than 500 grams axial rigidity. The patients with Ambicor type, which were buckled at about 710.5 grams, showed worse satisfaction rates in comparison to other prostheses in two patients. Digital inflection rigidometer results of other penile prosthesis types in unsatisfied patient were 842.0, 872.0, 887.0 and 920 g. in CX700, Titan, Genesis and Titan OTR, respectively. Conclusion: We demonstrated that dissatisfaction rate was highest in Ambicor prosthesis implanted patients. Additionally, patients with 3-piece penile prosthesis were more satisfied than 2-piece or malleable ones, interestingly, although

  7. Axial penile rigidity influences patient and partner satisfaction after penile prosthesis implantation.

    Science.gov (United States)

    Al Ansari, Abdulla; Talib, Raidh A; Canguven, Onder; Shamsodini, Ahmad

    2013-09-26

    Penile prosthesis implantation is one of the treatment choices that is kept for patients who were not satisfied with other treatments. Although penile prosthesis satisfaction rates are higher, there are some dissatisfied patients. The patients’ reasons are mostly shortness and softness of implanted prosthesis. It was previously demonstrated that penile axial rigidity of more than 500 grams is enough for successful vaginal intromission. To our knowledge, there is no study comparing axial rigidity of penile prosthesis and satisfaction. The aim of this study was to examine whether axial rigidity of penile prosthesis had impact on patient and partner satisfaction. We enrolled one hundred patients who were implanted penile prosthesis before to evaluate their penile axial rigidity. We used Rigidometry (by using the digital inflection rigidometer) to assess the minimal axial pressure to bend the implanted penis. We demonstrated that mean axial pressure to bend the implanted penis was 984.8 ± 268.7 grams. Overall satisfaction score with the penile prosthesis implant was 4.55 and 4.49 (out of 5) in patients and partners, respectively. In total, seven men were unsatisfied with their implant and reported a mean satisfaction score of 0.6 ± 0.48 (out of 5). All prostheses types showed good and more than 500 grams axial rigidity. The patients with Ambicor type, which were buckled at about 710.5 grams, showed worse satisfaction rates in comparison to other prostheses in two patients. Digital inflection rigidometer results of other penile prosthesis types in unsatisfied patient were 842.0, 872.0, 887.0 and 920 g. in CX700, Titan, Genesis and Titan OTR, respectively. We demonstrated that dissatisfaction rate was highest in Ambicor prosthesis implanted patients. Additionally, patients with 3-piece penile prosthesis were more satisfied than 2-piece or malleable ones, interestingly, although some cases had lower axial rigidity results.

  8. COMPARISON OF CULTURE OF SYNOVIAL FLUID, PERIPROSTHETIC TISSUE AND PROSTHESIS SONICATE FOR THE DIAGNOSIS OF KNEE PROSTHESIS INFECTION

    Directory of Open Access Journals (Sweden)

    Andrej Trampuž

    2003-03-01

    Full Text Available Background. Synovial fluid and periprosthetic tissue specimens are the standard specimens cultured for the diagnosis of prosthetic joint infection (PJI. We hypothesize that ultrasonication of the explanted prosthesis may improve diagnosis of PJI by dislodging biofilm bacteria from the prosthesis surface and improve the sensitivity and specificity of diagnosis of PJI.Methods. Included were patients undergoing knee prosthesis exchange for septic or biomechanical failure and have not received antimicrobial therapy in the last 2 weeks prior specimen collection. Cultures of synovial fluid and periprosthetic tissue specimens were performed per the usual clinical practice. Additionally, explanted joint components were sonicated for 5 minutes at frequency 40 kHz in sterile Ringer’s solution; aliquots of 0.5 ml sonicate were plated onto five aerobic and five anaerobic blood agar plates, and incubated at 37 °C and examined for the next seven days. The number and identity of each colony morphology was recorded.Results. 35 patients undergoing knee replacement have been studied (24 for aseptic biomechanical failure and 11 for suspected PJI. In patients with PJI, coagulase-negative staphylococci (7 cases, Corynebacterium spp. (2 cases, Staphylococcus aureus (1 case, and viridans group streptococcus (1 case were recovered. Culture sensitivity and specificity were for synovial fluid 88% and 100%, for periprosthetic tissue 83% and 81%, and for explant sonicate 91% and 100%, respectively. In sonicate cultures higher numbers of microorganisms than in periprosthetic tissue cultures were consistently detected.Conclusions. Using synovial fluid, periprosthetic tissue, and explant sonicate cultures, 12%, 17% and 9% of PJI were missed, respectively. Explant sonicate cultures were the most sensitive with respect to the diagnosis of PJI, indicating that explant ultrasonication may improve bacterial recovery. In sonicate cultures, infecting organisms were detected in

  9. Water Environment Evolution along the China Grand Canal

    Science.gov (United States)

    Mao, F.; Wu, Y. X.; Yang, B. F.; Li, X. J.

    2014-03-01

    The China Grand Canal is one of the earliest canals in the world, having lasted for nearly 3000 years. Even its section canals have a rich history, such as the North-South Grand Canal that was established during the Sui Dynasty, whereas the Beijing-Hangzhou Canal was excavated during the Yuan Dynasty and the east line of the South-to-North Water Diversion. As one of the longest in the world, the China Grand Canal's total length is over 3500 kilometers. This length includes the navigable, unnavigable, and underground sections. Making the best use of situations and according to local conditions, the Chinese people harmoniously constructed the Beijing-Hangzhou Canal with nature. Tens of millions of workers took nearly 3000 years to complete the great shipping system. Navigable sections still exist for up to 900 kilometers and the volume of freight traffic is approximately 300 million tons. The canal remains the main logistical channel of the North-to-South Coal Transportation, South-to-North Water Diversion, and resources circulation. To date, China is promoting the success of heritage application. Part of these efforts is the declaration of the China Grand Canal as a World Cultural Heritage by 2014. In addition, the east route of the South-to-North Water Transfer project is planned to be navigable by 2016. The ancient Beijing-Hangzhou Grand Canal will usher in the new ecological civilization and cultural revival along the canal. This paper presents technical methods of water environment evolution research on the river system, river, and water quality along the Beijing-Hangzhou Canal through the integration of historical literature and modern remote sensing image data. The study carried out water environment investigation and analysis along the Beijing-Hangzhou canal by using ETM, SPOT image data, and GPS measurement data. Spatial and temporal evolution characteristics and regulations of the Beijing-Hangzhou Grand Canal regional water environment in the span of 3000

  10. Root canal treatment of mandibular second premolar tooth with taurodontism

    Directory of Open Access Journals (Sweden)

    Vujašković Mirjana

    2008-01-01

    Full Text Available INTRODUCTION Taurodontism is a morphoanatomical change in the shape of a tooth. An enlarged body of a tooth with smaller than usual roots is a characteristic feature. Internal tooth anatomy correlates with this appearance, which means that a taurodontal tooth has a large pulp chamber and apically positioned furcations. This dental anomaly may be associated with different syndromes and congenital discoders. CASE OUTLINE The case report presents the patient of a rare case of taurodontism in the mandibular second premolar with chronic periodontitis. Endodontic treatment was performed after dental history and clinical examination. Special care is required in all segments of endodontic treatment of a taurodontal tooth from the identification orifice, canal exploration, determining working length, cleaning and shaping and obturation of the root canal. Precurved K-file was used for canal exploration and location of the furcation. One mesial and one distal canal with the buccal position were identified in the apical third of the root canal. The working lengths of two canals were determined by radiographic interpretation with two K-files in each canal and verified with the apex locator. During canal instrumentation, the third canal was located in the disto-lingual position. The working length of the third canal was established using the apex locator. CONCLUSION Thorough knowledge of tooth anatomy and its variations can lead to lower percentage of endodontic failure. Each clinical case involving these teeth should be investigated carefully, clinically and radiographically to detect additional root canals. High quality radiographs from different angles and proper instrumentarium improve the quality of endodontic procedure.

  11. [Root canal treatment of mandibular second premolar tooth with taurodontism].

    Science.gov (United States)

    Vujasković, Mirjana; Karadzić, Branislav; Miletić, Vesna

    2008-01-01

    Taurodontism is a morphoanatomical change in the shape of a tooth. An enlarged body of a tooth with smaller than usual roots is a characteristic feature. Internal tooth anatomy correlates with this appearance, which means that a taurodontal tooth has a large pulp chamber and apically positioned furcations. This dental anomaly may be associated with different syndromes and congenital discoders. The case report presents the patient of a rare case of taurodontism in the mandibular second premolar with chronic periodontitis. Endodontic treatment was performed after dental history and clinical examination. Special care is required in all segments of endodontic treatment of a taurodontal tooth from the identification orifice, canal exploration, determining working length, cleaning and shaping and obturation of the root canal. Precurved K-file was used for canal exploration and location of the furcation. One mesial and one distal canal with the buccal position were identified in the apical third of the root canal. The working lengths of two canals were determined by radiographic interpretation with two K-files in each canal and verified with the apex locator. During canal instrumentation, the third canal was located in the disto-lingual position. The working length of the third canal was established using the apex locator. Thorough knowledge of tooth anatomy and its variations can lead to lower percentage of endodontic failure. Each clinical case involving these teeth should be investigated carefully, clinically and radiographically to detect additional root canals. High quality radiographs from different angles and proper instrumentarium improve the quality of endodontic procedure.

  12. File list: His.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.50.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular ...canals http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.50.AllAg.Atrioventicular_canals.bed ...

  13. File list: His.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.05.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular ...canals http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.05.AllAg.Atrioventicular_canals.bed ...

  14. File list: Unc.CDV.50.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.50.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventic...ular canals http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.50.AllAg.Atrioventicular_canals.bed ...

  15. File list: Unc.CDV.05.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.05.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventicular cana...ls http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.05.AllAg.Atrioventicular_canals.bed ...

  16. File list: His.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.20.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular cana...ls http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.20.AllAg.Atrioventicular_canals.bed ...

  17. File list: His.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.CDV.10.AllAg.Atrioventicular_canals mm9 Histone Cardiovascular Atrioventicular cana...ls http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.CDV.10.AllAg.Atrioventicular_canals.bed ...

  18. File list: Unc.CDV.20.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.20.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventicular cana...ls http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.20.AllAg.Atrioventicular_canals.bed ...

  19. File list: Unc.CDV.10.AllAg.Atrioventicular_canals [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.CDV.10.AllAg.Atrioventicular_canals mm9 Unclassified Cardiovascular Atrioventicular cana...ls http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Unc.CDV.10.AllAg.Atrioventicular_canals.bed ...

  20. MMG-based classification of muscle activity for prosthesis control.

    Science.gov (United States)

    Silva, J; Heim, W; Chau, T

    2004-01-01

    We have previously proposed the use of "muscle sounds" or mechanomyography (MMG) as a reliable alternative measure of muscle activity with the main objective of facilitating the use of more comfortable and functional soft silicone sockets with below-elbow externally powered prosthesis. This work describes an integrated strategy where data and sensor fusion algorithms are combined to provide MMG-based detection, estimation and classification of muscle activity. The proposed strategy represents the first ever attempt to generate multiple output signals for practical prosthesis control using a MMG multisensor array embedded distally within a silicon soft socket. This multisensor fusion strategy consists of two stages. The first is the detection stage which determines the presence or absence of muscle contractions in the acquired signals. Upon detection of a contraction, the second stage, that of classification, specifies the nature of the contraction and determines the corresponding control output. Tests with real amputees indicate that with the simple detection and classification algorithms proposed, MMG is indeed comparable to and may exceed EMG functionally.

  1. Assessment of Lower Limb Prosthesis through Wearable Sensors and Thermography

    Science.gov (United States)

    Cutti, Andrea Giovanni; Perego, Paolo; Fusca, Marcello C.; Sacchetti, Rinaldo; Andreoni, Giuseppe

    2014-01-01

    This study aimed to explore the application of infrared thermography in combination with ambulatory wearable monitoring of temperature and relative humidity, to assess the residual limb-to-liner interface in lower-limb prosthesis users. Five male traumatic transtibial amputees were involved, who reported no problems or discomfort while wearing the prosthesis. A thermal imaging camera was used to measure superficial thermal distribution maps of the stump. A wearable system for recording the temperature and relative humidity in up to four anatomical points was developed, tested in vitro and integrated with the measurement set. The parallel application of an infrared camera and wearable sensors provided complementary information. Four main Regions of Interest were identified on the stump (inferior patella, lateral/medial epicondyles, tibial tuberosity), with good inter-subject repeatability. An average increase of 20% in hot areas (P < 0.05) is shown after walking compared to resting conditions. The sensors inside the cuff did not provoke any discomfort during recordings and provide an inside of the thermal exchanges while walking and recording the temperature increase (a regime value is ∼+1.1 ± 0.7 °C) and a more significant one (∼+4.1 ± 2.3%) in humidity because of the sweat produced. This study has also begun the development of a reference data set for optimal socket/liner-stump construction. PMID:24618782

  2. Rehabilitation with ear prosthesis linked to osseointegrated implants.

    Science.gov (United States)

    Goiato, Marcelo C; dos Santos, Daniela M; Haddad, Marcela F; Moreno, Amália

    2012-06-01

    The absence of an ear, which can be the result of a congenital malformation, surgical tumour resection or traumatic injury, is a significant aesthetic problem. Attachment of ear prostheses with adhesives can cause local irritation for the wearer and affect the colour of the prostheses. Use of implants in craniofacial reconstruction can improve the retention and stability of prostheses giving to patient greater comfort and security relative to adhesive attachment. The aim of this report was to present a clinical case of a mutilated patient who was rehabilitated by means of installing an ear prosthesis fixed through osseointegrated implants. The patient had two implants installed in the mastoid region that were linked by a bar, and a clip-type system was used. The ear prosthesis was constructed from medical-use silicone, pigmented to match the patient's skin colour and linked to the retention system. The patient's rehabilitation was satisfactory from both a functional and an aesthetic point of view, making it possible for the patient to return to a normal social life and regain lost self-esteem. © 2012 The Gerodontology Society and John Wiley & Sons A/S.

  3. Assessment of Lower Limb Prosthesis through Wearable Sensors and Thermography

    Directory of Open Access Journals (Sweden)

    Andrea Giovanni Cutti

    2014-03-01

    Full Text Available This study aimed to explore the application of infrared thermography in combination with ambulatory wearable monitoring of temperature and relative humidity, to assess the residual limb-to-liner interface in lower-limb prosthesis users. Five male traumatic transtibial amputees were involved, who reported no problems or discomfort while wearing the prosthesis. A thermal imaging camera was used to measure superficial thermal distribution maps of the stump. A wearable system for recording the temperature and relative humidity in up to four anatomical points was developed, tested in vitro and integrated with the measurement set. The parallel application of an infrared camera and wearable sensors provided complementary information. Four main Regions of Interest were identified on the stump (inferior patella, lateral/medial epicondyles, tibial tuberosity, with good inter-subject repeatability. An average increase of 20% in hot areas (P < 0.05 is shown after walking compared to resting conditions. The sensors inside the cuff did not provoke any discomfort during recordings and provide an inside of the thermal exchanges while walking and recording the temperature increase (a regime value is ~+1.1 ± 0.7 °C and a more significant one (~+4.1 ± 2.3% in humidity because of the sweat produced. This study has also begun the development of a reference data set for optimal socket/liner-stump construction.

  4. Research on Architecture of the Prosthesis Shaping Equipment Control System

    Directory of Open Access Journals (Sweden)

    Kai Sun

    2014-06-01

    Full Text Available In order to realize a high speed and high accuracy prosthesis shaping equipment (PSE control system, this paper proposes a new software-hardware architecture of a five-axis high performance NC system. The software part of the proposed architecture follows the rules of the hierarchy and modularity. The inheritance, scalability, and stability are ensured on the whole system and local parts. According to the idea of modular design, the framework uses the client-server mode in the communication and scheduling level. With this way, the reliability of the module management is ensured. The hardware part of the proposed architecture consists of two main parts: the controller and I/O module. The controller is based on FPGA and uses PCI bus and IPC interface. The I/O module is based on ARM + CPLD and uses CAN bus to communicate with the controller. This paper also studies some key problems such as the driving signal producing mechanism. The results of prosthesis shaping equipment prototype show that the system which uses the proposed architecture can reach the positioning accuracy up to 0.02 mm and 3D typical surface cutting accuracy up to 0.02 mm, and this accuracy level already leads similar products in market.

  5. Targeted muscle reinnervation a neural interface for artificial limbs

    CERN Document Server

    Kuiken, Todd A; Barlow, Ann K

    2013-01-01

    Implement TMR with Your Patients and Improve Their Quality of Life Developed by Dr. Todd A. Kuiken and Dr. Gregory A. Dumanian, targeted muscle reinnervation (TMR) is a new approach to accessing motor control signals from peripheral nerves after amputation and providing sensory feedback to prosthesis users. This practical approach has many advantages over other neural-machine interfaces for the improved control of artificial limbs. Targeted Muscle Reinnervation: A Neural Interface for Artificial Limbs provides a template for the clinical implementation of TMR and a resource for further research in this new area of science. After describing the basic scientific concepts and key principles underlying TMR, the book presents surgical approaches to transhumeral and shoulder disarticulation amputations. It explores the possible role of TMR in the prevention and treatment of end-neuromas and details the principles of rehabilitation, prosthetic fitting, and occupational therapy for TMR patients. The book also describ...

  6. Endodontic management of permanent mandibular left first molar with six root canals

    Directory of Open Access Journals (Sweden)

    Sachin Gupta

    2012-01-01

    Full Text Available The endodontic treatment of a mandibular molar with aberrant canal configuration can be diagnostically and clinically challenging. This case report presents the treatment of a mandibular first molar with six root canals, of which three canals were located in the mesial root and three in distal root. Third canals were found between the two main root canals. This case presents a rare anatomic configuration and points to the importance of expecting and searching for additional canals.

  7. [Neural repair].

    Science.gov (United States)

    Kitada, Masaaki; Dezawa, Mari

    2008-05-01

    Recent progress of stem cell biology gives us the hope for neural repair. We have established methods to specifically induce functional Schwann cells and neurons from bone marrow stromal cells (MSCs). The effectiveness of these induced cells was evaluated by grafting them either into peripheral nerve injury, spinal cord injury, or Parkinson' s disease animal models. MSCs-derived Schwann cells supported axonal regeneration and re-constructed myelin to facilitate the functional recovery in peripheral and spinal cord injury. MSCs-derived dopaminergic neurons integrated into host striatum and contributed to behavioral repair. In this review, we introduce the differentiation potential of MSCs and finally discuss about their benefits and drawbacks of these induction systems for cell-based therapy in neuro-traumatic and neuro-degenerative diseases.

  8. Visibility of the central canal on MRI

    Energy Technology Data Exchange (ETDEWEB)

    Petit-Lacour, M.C.; Lasjaunias, P.; Iffenecker, C.; Benoudiba, F.; Hadj Rabia, M.; Doyon, D. [Service de Neuroradiologie, Faculte de Paris Sud (France); Hurth, M. [Department of Neurosurgery, Faculte Paris Sud, Kremlin-Bicetre (France)

    2000-10-01

    The central canal of the spinal cord is present at birth and becomes progressively obliterated. Cadaver studies have shown that it may persiste partially or completely. To our knowledge, this entity has not been described on MRI. We reviewed 794 MRI studies of the spinal cord, and found 12 patients (aged 14 to 65 years) who had an intramedullary cavity. The cavity was at the junction of the ventral {sup 1}/{sub 3} and dorsal {sup 2}/{sub 3} of the spinal cord, except at the level of the lumbar enlargement, where it was central. It was filiform in most cases, although sometimes fusiform (3 to 4 mm in diameter), and had regular contours. The cavity were thoracic in 69 % of cases. The clinical features were totally unrelated to the image, and there were no anatomical factors (Chiari malformation, dysraphism) predisposing to syringomyelia. The images were perfectly compatible with a persistent central canal, which we interpret as a variant of normal anatomy. Therefore it is important to regard these findings as normal, to avoid unnecessary treatment and follow-up. (orig.)

  9. Root canals-from concretion to patency

    Directory of Open Access Journals (Sweden)

    Chandrakar Chaman

    2015-01-01

    Full Text Available Teeth with calcification provide an endodontic treatment challenge; traumatized teeth usually develop partial or total pulpal obliteration which is characterized by apparent loss of the pulp space radiographically and a yellow discoloration of the clinical crown. Since only 7-27% of such teeth develop pulp necrosis with radiographic signs of apical periodontitis, it is difficult to decide whether to treat these teeth immediately upon detection of the pulpal obliteration or to wait until signs and symptoms of pulp and/or apical periodontitis occur. This article reviews the etiology, prevalence, classification, mechanism, diagnosis as well as treatment options for teeth with pulp obliteration and the various management approaches and treatment strategies for overcoming potential complications. A search of articles from "PubMed" and "Medline" from 1965 to present was done with the keywords dental trauma, discoloration, pathfinding instruments, pulp canal obliteration, and root canal treatment was conducted. A total of 94 abstracts were collected, of which 70 relevant articles were read and 31 most relevant articles were included in this article.

  10. Assessment of three root canal preparation techniques on root canal geometry using micro-computed tomography: In vitro study

    Directory of Open Access Journals (Sweden)

    Shaikha M Al-Ali

    2012-01-01

    Full Text Available Aim: To assess the effects of three root canal preparation techniques on canal volume and surface area using three-dimensionally reconstructed root canals in extracted human maxillary molars. Materials and Methods: Thirty extracted Human Maxillary Molars having three separate roots and similar root shape were randomly selected from a pool of extracted teeth for this study and stored in normal saline solution until used. A computed tomography scanner (Philips Brilliance CT 64-slice was used to analyze root canals in extracted maxillary molars. Specimens were scanned before and after canals were prepared using stainless steel K-Files, Ni-Ti rotary ProTaper and rotary SafeSiders instruments. Differences in dentin volume removed, the surface area, the proportion of unchanged area and canal transportation were calculated using specially developed software. Results: Instrumentation of canals increased volume and surface area. Statistical analysis found a statistically significant difference among the 3 groups in total change in volume (P = 0.001 and total change in surface area (P = 0.13. Significant differences were found when testing both groups with group III (SafeSiders. Significant differences in change of volume were noted when grouping was made with respect to canal type (in MB and DB (P < 0.05. Conclusion: The current study used computed tomography, an innovative and non destructive technique, to illustrate changes in canal geometry. Overall, there were few statistically significant differences between the three instrumentation techniques used. SafeSiders stainless steel 40/0.02 instruments exhibit a greater cutting efficiency on dentin than K-Files and ProTaper. CT is a new and valuable tool to study root canal geometry and changes after preparation in great details. Further studies with 3D-techniques are required to fully understand the biomechanical aspects of root canal preparation.

  11. Endodontic management of mandibular canine with two canals

    Directory of Open Access Journals (Sweden)

    Nidhi Shrivastava

    2013-01-01

    Full Text Available Endodontic treatment may sometimes fail because morphological features of the tooth adversely affect the treatment procedures. Many investigators have reported the anatomical variations associated with mandibular canines. Mandibular canines are recognized as usually having one root and one root canal in most cases. This case report describes a clinical case of mandibular canine with two canals. Human mandibular canines do not present internal anatomy as simple as could be expected; there are such canines with a single root and two canals, two roots or fused roots. The existence of mandibular canines with more than one root canal is a fact that clinicians ought to keep in mind, in order to avoid failure during endodontic treatment. In spite of the low incidence of lower canines with one root and two canals, this possibility cannot be forgotten, inasmuch as the presence of a second canal in these teeth leads to difficulties in endodontic treatment. The precise knowledge of the dental endocanalicular system′s anatomy is essential in the success of the root canal therapy, because the failure to detect the accessories canals and the incomplete radicular obturation leads to the infection of the periapical space, which will ultimately result in the loss of the tooth.

  12. Technical quality of root canal treatment in Taiwan.

    Science.gov (United States)

    Chueh, L-H; Chen, S-C; Lee, C-M; Hsu, Y-Y; Pai, S-F; Kuo, M-L; Chen, C-S; Duh, B-R; Yang, S-F; Tung, Y-L; Hsiao, Chuhsing Kate

    2003-06-01

    To evaluate the current technical quality of root canal treatment (RCT) in Taiwan. A total of 1085 RCT cases, randomly selected from a large sample and representative of the Taiwanese population from April to September 2000, were evaluated by eight endodontic specialists. The qualitative evaluation of RCT cases was based on two variables: length of the root filling and density of the obturation. A root canal with both adequate filling length (the apical termination of the root filling within 2 mm of the radiographic apex) and complete obturation (no lateral or apical canal lumen visible in the apical one-third of the root canal) was defined as having good-quality endodontic work (GQEW). A tooth was defined as having a GQEW when all its canals were categorized as GQEW. From a total of 1867 root canals, overfilling occurred in 235 (12.6%), adequate filling length in 1152 (61.7%), underfilling in 466 (25.0%) and no filling in 12 (0.6%). Of the 1867 root canals, 710 (38.0%) demonstrated complete obturation and 1157 (62%) demonstrated incomplete obturation. GQEW was found in 650 (34.8%) root canals and 329 (30.3%) teeth. The percentage of teeth with GQEW in hospital cases (38.1%) was significantly greater (P RCT in Taiwan were either of inadequate filling length or sealing density.

  13. Lateral line canal morphology and signal to noise ratio

    Science.gov (United States)

    Klein, Adrian; Herzog, Hendrik; Bleckmann, Horst

    2011-04-01

    The lateral line system of fish is important for many behaviors, including spatial orientation, prey detection, shoaling, intra specific communication and entraining. The smallest sensory unit of the lateral line is the neuromast that occurs free standing on the skin and in fluid filled canals. With aid of the lateral line fish perceive minute water motions. In their natural habitat fish are not only faced with biotic water motion but also with the abiotic fluctuations caused by various inanimate sources. The detection of meaningful signals is crucial for survival, and therefore animals should be able to separate meaningful signals from noise. Fishes live in various habitats (e.g. in still water or in running water). Therefore it is not surprising that the number and distribution of neuromasts as well as canal dimension, canal shape and canal branching patterns differ among fish species. We studied how lateral line canal parameters influence the filter properties of lateral line canals. To do so we exposed artificial lateral line canals, equipped with artificial neuromasts (sensors), to the vortex street shed by a submerged cylinder and to air bubble noise. We found that certain canal parameters significantly can enhance the signal to noise ratio.

  14. 33 CFR 117.769 - Black Rock Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Black Rock Canal. 117.769 Section 117.769 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements New York § 117.769 Black Rock Canal. The draws of the...

  15. 33 CFR 117.159 - Grant Line Canal.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Grant Line Canal. 117.159 Section 117.159 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements California § 117.159 Grant Line Canal. The draw of the...

  16. Segmental carpal canal pressure in patients with carpal tunnel syndrome.

    Science.gov (United States)

    Ikeda, Kazuo; Osamura, Naoki; Tomita, Katsuro

    2006-01-01

    To clarify which part of the median nerve is the most compressed and to compare carpal canal pressure with the latency of the sensory nerve potential and the duration of symptoms. Fifteen patients with idiopathic carpal tunnel syndrome were studied using a pressure guidewire system to record canal pressure. The wire was introduced from the distal end of the carpal canal to 2 cm proximal to the distal wrist crease (DWC) and then retracted in 5-mm increments using an image intensifier to guide the progress. A nerve conduction study was performed, and all patients were asked how long the symptoms lasted. Carpal canal pressure was significantly higher 5 to 15 mm distal to the DWC. The most compressed point was 10 mm distal to the DWC, with a pressure of 44.9 +/- 26.4 mm Hg. The correlation coefficient between the highest canal pressure and the latency was 0.393 and between highest canal pressure and duration of symptoms was 0.402. Our study showed that the most compressed part of the median nerve in the carpal canal is 10 mm distal to the DWC. The carpal canal pressure was related to the latency and to the duration of symptoms.

  17. Sexual dimorphism in cervical vertebral canal measurements of ...

    African Journals Online (AJOL)

    Sexual dimorphism in cervical vertebral canal measurements of human foetuses. ... Anatomy Journal of Africa ... Cervical parts of vertebral canal in 30 normal human foetuses was exposed in coronal plane and were divided in groups 1 and 2 which correspond with 2nd and 3rd trimester of pregnancy respectively. Groups 1 ...

  18. Morphology of root canals in lower human premolars | Baroudi ...

    African Journals Online (AJOL)

    Background The knowledge of the root canal morphology and the possible anatomical variations of mandibular premolars are important for the successful endodontic treatment of such cases. The aim of this study was to investigate the presence of two or three root canals in extracted first and second mandibular premolars ...

  19. Reform in Indian canal irrigation: does technology matter?

    NARCIS (Netherlands)

    Narain, V.

    2008-01-01

    This paper examines the implications of technology - the design of canal irrigation for irrigation management reform. With reference to two different design systems in Indian irrigation - shejpali and warabandi - it shows that the potential for reform varies with the design of canal irrigation.

  20. Traditional and contemporary techniques for optimizing root canal irrigation.

    Science.gov (United States)

    Holliday, Richard; Alani, Aws

    2014-01-01

    Canal irrigation during root canal treatment is an important component of chemo-mechanical debridement of the root canal system. Traditional syringe irrigation can be enhanced by activating the irrigant to provide superior cleaning properties. This activation can be achieved by simple modifications in current technique or by contemporary automated devices. Novel techniques are also being developed, such as the Self-adjusting File (Re-Dent-Nova, Ra'anana, Israel), Ozone (Healozone, Dental Ozone, London, UK), Photoactivated Disinfection and Ultraviolet Light Disinfection. This paper reviews the techniques available to enhance traditional syringe irrigation, contemporary irrigation devices and novel techniques, citing their evidence base, advantages and disadvantages. Recent advances in irrigation techniques and canal disinfection and debridement are relevant to practitioners carrying out root canal treatment.

  1. Hydrology and environmental aspects of Erie Canal (1817-99)

    Science.gov (United States)

    Langbein, Walter Basil

    1976-01-01

    As the first major water project in the United States, the old Erie Canal provides an example of the hydrological and environmental consequences of water development. The available record shows that the project aroused environmental fears that the canal might be impaired by the adverse hydrologic effects of land development induced by the canal. Water requirements proved greater than anticipated, and problems of floods and hydraulic inefficiencies beset navigation throughout its history. The Erie Canal proved the practicality of major hydraulic works to the extent that operations and maintenance could cope with the burdens of deficiencies in design. The weight of prior experience that upland streams, such as the Potomac and Mohawk Rivers, had proved unsatisfactory for dependable navigation, led to a decision to build an independent canal which freed the location from the constraints of river channels and made possible a cross-country water route directly to Lake Erie. The decision on dimensioning the canal prism--chiefly width and depth-involved balance between a fear of building too small and thus not achieving the economic potentials, and a fear of building too expensively. The constraints proved effective, and for the first part of its history the revenues collected were sufficient to repay all costs. So great was the economic advantage of the canal that the rising trend in traffic soon induced an enlargement of the canal cross section, based upon a new but riskier objective-build as large as the projected trend in toll revenues would finance. The increased revenues did not materialize. Water supplies were a primary concern for both the planners and the operators of the canal. Water required for lockage, although the most obvious to the planners, proved to be a relatively minor item compared with the amounts of water that were required to compensate for leakage through the bed and banks of the canal. Leakage amounted to about 8 inches of depth per day. The total

  2. VARIATION OF MAXILLARY FIRST PREMOLAR WITH THREE ROOT CANALS

    Directory of Open Access Journals (Sweden)

    Janet Kirilova

    2014-09-01

    Full Text Available Background: Successful endodontic treatment requires effective biomechanical preparation of the root canals and three-dimensional obturation of the root canal system. This can be achieved only by knowing and identifying the variations in the root canal system of the endodontically treated teeth. The Aim: The aim of this article is to present cases of endodontic treatment of maxillary first premolar with three root canals – different types. Material and Methods: Five clinical cases of successful endodontic treatment of patients with maxillary first premolar and three root canals are described. Result and Discussion: It is noted that good endodontic practice requires good knowledge of dental anatomy and possible variations, accurate X-ray images, as well as use of magnifying equipment. Conclusion: Knowledge of dental anatomy is fundamental for good endodontic practice.

  3. Cultured Neural Networks: Optimization of Patterned Network Adhesiveness and Characterization of their Neural Activity

    Directory of Open Access Journals (Sweden)

    W. L. C. Rutten

    2006-01-01

    Full Text Available One type of future, improved neural interface is the “cultured probe”. It is a hybrid type of neural information transducer or prosthesis, for stimulation and/or recording of neural activity. It would consist of a microelectrode array (MEA on a planar substrate, each electrode being covered and surrounded by a local circularly confined network (“island” of cultured neurons. The main purpose of the local networks is that they act as biofriendly intermediates for collateral sprouts from the in vivo system, thus allowing for an effective and selective neuron–electrode interface. As a secondary purpose, one may envisage future information processing applications of these intermediary networks. In this paper, first, progress is shown on how substrates can be chemically modified to confine developing networks, cultured from dissociated rat cortex cells, to “islands” surrounding an electrode site. Additional coating of neurophobic, polyimide-coated substrate by triblock-copolymer coating enhances neurophilic-neurophobic adhesion contrast. Secondly, results are given on neuronal activity in patterned, unconnected and connected, circular “island” networks. For connected islands, the larger the island diameter (50, 100 or 150 μm, the more spontaneous activity is seen. Also, activity may show a very high degree of synchronization between two islands. For unconnected islands, activity may start at 22 days in vitro (DIV, which is two weeks later than in unpatterned networks.

  4. A new malleostapedotomy prosthesis. Experimental analysis by laser doppler vibrometer in fresh cadaver temporal bones.

    Science.gov (United States)

    Vallejo, Luis A; Manzano, María T; Hidalgo, Antonio; Hernández, Alberto; Sabas, Juan; Lara, Hugo; Gil-Carcedo, Elisa; Herrero, David

    One of the problems with total ossicular replacement prostheses is their stability. Prosthesis dislocations and extrusions are common in middle ear surgery. This is due to variations in endo-tympanic pressure as well as design defects. The design of this new prosthesis reduces this problem by being joined directly to the malleus handle. The aim of this study is to confirm adequate acoustic-mechanical behaviour in fresh cadaver middle ear of a new total ossicular replacement prosthesis, designed using the finite elements method. Using the doppler vibrometer laser, we analysed the acoustic-mechanical behaviour of a new total ossicular replacement prosthesis in the human middle ear using 10 temporal bones from fresh cadavers. The transfer function of the ears in which we implanted the new prosthesis was superimposed over the non-manipulated ear. This suggests optimum acoustic-mechanical behaviour. The titanium prosthesis analysed in this study demonstrated optimum acoustic-mechanical behaviour. Together with its ease of implantation and post-surgical stability, these factors make it a prosthesis to be kept in mind in ossicular reconstruction. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Cirugía de Cabeza y Cuello. All rights reserved.

  5. Muscle and prosthesis contributions to amputee walking mechanics: a modeling study.

    Science.gov (United States)

    Silverman, Anne K; Neptune, Richard R

    2012-08-31

    Unilateral, below-knee amputees have altered gait mechanics, which can significantly affect their mobility. Below-knee amputees lose the functional use of the ankle muscles, which are critical during walking to provide body support, forward propulsion, leg-swing initiation and mediolateral balance. Thus, either muscles must compensate or the prosthesis must provide the functional tasks normally provided by the ankle muscles. Three-dimensional (3D) forward dynamics simulations of amputee and non-amputee walking were generated to identify muscle and prosthesis contributions to amputee walking mechanics, including the subtasks of body support, forward propulsion, leg-swing initiation and mediolateral balance. Results showed that the prosthesis provided body support in the absence of the ankle muscles. The prosthesis contributed to braking from early to mid-stance and propulsion in late stance. The prosthesis also functioned like the uniarticular soleus muscle by transferring energy from the residual leg to the trunk to provide trunk propulsion. The residual-leg vasti and rectus femoris reduced their contributions to braking in early stance, which mitigated braking from the prosthesis during this period. The prosthesis did not replace the function of the gastrocnemius, which normally generates energy to the leg to initiate swing. As a result, lower overall energy was delivered to the residual leg. The prosthesis also acted to accelerate the body laterally in the absence of the ankle muscles. These results provide further insight into muscle and prosthesis function in below-knee amputee walking and can help guide rehabilitation methods and device designs to improve amputee mobility. Copyright © 2012 Elsevier Ltd. All rights reserved.

  6. Superior Canal Dehiscence Syndrome Affecting 3 Families.

    Science.gov (United States)

    Heidenreich, Katherine D; Kileny, Paul R; Ahmed, Sameer; El-Kashlan, Hussam K; Melendez, Tori L; Basura, Gregory J; Lesperance, Marci M

    2017-07-01

    Superior canal dehiscence syndrome (SCDS) is an increasingly recognized cause of hearing loss and vestibular symptoms, but the etiology of this condition remains unknown. To describe 7 cases of SCDS across 3 families. This retrospective case series included 7 patients from 3 different families treated at a neurotology clinic at a tertiary academic medical center from 2010 to 2014. Patients were referred by other otolaryngologists or were self-referred. Each patient demonstrated unilateral or bilateral SCDS or near dehiscence. Clinical evaluation involved body mass index calculation, audiometry, cervical vestibular evoked myogenic potential testing, electrocochleography, and multiplanar computed tomographic (CT) scan of the temporal bones. Zygosity testing was performed on twin siblings. The diagnosis of SCDS was made if bone was absent over the superior semicircular canal on 2 consecutive CT images, in addition to 1 physiologic sign consistent with labyrinthine dehiscence. Near dehiscence was defined as absent bone on only 1 CT image but with symptoms and at least 1 physiologic sign of labyrinthine dehiscence. A total of 7 patients (5 female and 2 male; age range, 8-49 years) from 3 families underwent evaluation. Family A consisted of 3 adult first-degree relatives, of whom 2 were diagnosed with SCDS and 1 with near dehiscence. Family B included a mother and her child, both of whom were diagnosed with unilateral SCDS. Family C consisted of adult monozygotic twins, each of whom was diagnosed with unilateral SCDS. For all cases, dehiscence was located at the arcuate eminence. Obesity alone did not explain the occurrence of SCDS because 5 of the 7 cases had a body mass index (calculated as weight in kilograms divided by height in meters squared) less than 30.0. Superior canal dehiscence syndrome is a rare, often unrecognized condition. This report of 3 multiplex families with SCDS provides evidence in support of a potential genetic contribution to the etiology

  7. A new cervical artificial disc prosthesis based on physiological curvature of end plate: a finite element analysis.

    Science.gov (United States)

    Yu, Cheng-Cheng; Liu, Peng; Huang, Da-Geng; Jiang, Yong-Hong; Feng, Hang; Hao, Ding-Jun

    2016-11-01

    The study aimed to build a new cervical artificial disc C3-C7 segment prosthesis, and perform a biomechanical comparison between the new prosthesis and the Prestige LP prosthesis using a three-dimensional non-linear finite element (FE) model. The study compared the biomechanical differences between the new cervical artificial disc prosthesis based on the physiological curvature of the end plate and the Prestige LP prosthesis after artificial disc replacement. There has been no prior research on artificial disc prostheses based on the physiological curvature of the end plate; studies of biomechanical changes after cervical disc arthroplasty (CDR) are few. An FE model of the C3-C7 segments was developed and validated. A new cervical artificial disc prosthesis based on the physiological curvature of the end plate and the Prestige LP prosthesis were integrated at the C5-C6 segment into the validated FE model. All models were subjected to a follower load of 73.6 N and a 1 Nm in flexion-extension, lateral bending, and axial torsion. The segmental range of motion (ROM) and stress on the prostheses were analyzed. The ROM in most segments after CDR with new cervical artificial disc prosthesis was more similar to that of the normal cervical spine than the Prestige LP prosthesis. However, there was no significant difference between the two prostheses. The stress on the new artificial disc was significantly less than that in the Prestige LP prosthesis. There was no significant difference in ROM in all segments after CDR for the two prostheses. The stress on the new cervical artificial disc prosthesis based on the physiological curvature of the end plate was significantly less than that in the Prestige LP prosthesis. The new artificial disc prosthesis is feasible and effective, and can reduce the implant-bone interface stress on the end plate, which may be one of the causes of prosthesis subsidence. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Electrotactile EMG feedback improves the control of prosthesis grasping force

    Science.gov (United States)

    Schweisfurth, Meike A.; Markovic, Marko; Dosen, Strahinja; Teich, Florian; Graimann, Bernhard; Farina, Dario

    2016-10-01

    Objective. A drawback of active prostheses is that they detach the subject from the produced forces, thereby preventing direct mechanical feedback. This can be compensated by providing somatosensory feedback to the user through mechanical or electrical stimulation, which in turn may improve the utility, sense of embodiment, and thereby increase the acceptance rate. Approach. In this study, we compared a novel approach to closing the loop, namely EMG feedback (emgFB), to classic force feedback (forceFB), using electrotactile interface in a realistic task setup. Eleven intact-bodied subjects and one transradial amputee performed a routine grasping task while receiving emgFB or forceFB. The two feedback types were delivered through the same electrotactile interface, using a mixed spatial/frequency coding to transmit 8 discrete levels of the feedback variable. In emgFB, the stimulation transmitted the amplitude of the processed myoelectric signal generated by the subject (prosthesis input), and in forceFB the generated grasping force (prosthesis output). The task comprised 150 trials of routine grasping at six forces, randomly presented in blocks of five trials (same force). Interquartile range and changes in the absolute error (AE) distribution (magnitude and dispersion) with respect to the target level were used to assess precision and overall performance, respectively. Main results. Relative to forceFB, emgFB significantly improved the precision of myoelectric commands (min/max of the significant levels) for 23%/36% as well as the precision of force control for 12%/32%, in intact-bodied subjects. Also, the magnitude and dispersion of the AE distribution were reduced. The results were similar in the amputee, showing considerable improvements. Significance. Using emgFB, the subjects therefore decreased the uncertainty of the forward pathway. Since there is a correspondence between the EMG and force, where the former anticipates the latter, the emgFB allowed for

  9. [The effect of left bacteria in the root canal on prognosis of the root canal therapy].

    Science.gov (United States)

    He, Jin-mei; Bian, Zhuan; Fan, Ming-wen; Fan, Bing

    2004-06-01

    To study the effect of the left bacteria on the root canal therapy. 50 single-rooted teeth with chronic apical periodontitis were divided into two groups, one was instrumented with step-back technique and 2.5%NaOCl ultrasonic irrigation for 3 min, then filled with Thermafil. Samples were taken after instrumentation to culture. The other was treated with traditional RCT at three visits. In 24 months the apical radiolucency were greatly reduced in all cases. There weren't significant relationship among the postoperative pain and the left bacteria, the degree of the obturation or the pre-operative symptoms (P > 0.05). The effect of left bacteria in root canal filled with Thermafil wasn't observed.

  10. Prosthetic management with a scleral prosthesis: an 'eye on an eye'.

    Science.gov (United States)

    Koralakunte, Pavankumar R; Basavapura, Nandeeshwar D; Budihal, Dhanyakumar H

    2014-04-01

    Eyes are an essential organ not only in terms of vision but also being an important component of facial expression. The loss of an eye has a crippling effect on the psychology of the patient. A natural eye is surgically removed by enucleation, evisceration or exenteration because of trauma, pathology or tumor. Treatment of such rehabilitation cases includes implant-retained and acrylic eye prostheses by a maxillofacial prosthodontist to restore the patient's quality of life. For economic reasons, a removable acrylic prosthesis is preferred over an implant-retained prosthesis. Here, we describe a case of a customized acrylic scleral shell prosthesis which showed excellent retention and esthetics.

  11. Phantom studies of triple photon absorptiometry and bone mineral measurement at a hip prosthesis

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, T.J.; Webber, C.E. (Chedoke McMaster Hospitals, Hamilton, ON (Canada). Dept. of Nuclear Medicine)

    1992-03-01

    The feasibility of using triple photon absorptiometry (TPA) for the measurement of bone mineral mass about a hip prosthesis was examined. A theoretical expression describing the variance of TPA measurements was verified using a triple photon source and phantom materials which simulate the soft tissue-bone mineral-metal prosthesis system. The expression for the variance was used to determine an optimized set of photon energies. It was shown that a precision of 3% could be obtained for reasonable measurement times using this optimized set of energies and that TPA should be a feasible approach for measurement of bone mineral about a hip prosthesis. (orig.).

  12. An innovative impression technique for fabrication of a custom made ocular prosthesis

    Directory of Open Access Journals (Sweden)

    Sunil Chandra Tripuraneni

    2015-01-01

    Full Text Available Various impression and fitting techniques have been described in the past for restoring ocular defects. The present article describes a new direct impression technique for recording and rehabilitating ocular defects, by custom-made ocular prosthesis. All the techniques described in the history, mainly concentrated in recording the tissue surface of the defect, which made it difficult to contour the palpebral surface resulting in the poor esthetics of the prosthesis. The present impression technique uses heavy bodied polyvinyl siloxane impression material, which facilitates accurate recording of the tissue surface and the palpebral surface of the defect, resulting in the fabrication of functionally and esthetically acceptable prosthesis.

  13. Maxillary palatal ramp prosthesis: A prosthodontic solution to manage mandibular deviation following surgery

    Directory of Open Access Journals (Sweden)

    Sampa Ray (Bhattacharya

    2015-01-01

    Full Text Available Mandibular resection following surgical treatment for neoplastic lesions of the oral cavity leads to numerous complications including altered mandibular movements, disfigurement, difficult in swallowing, impaired speech and articulation, and deviation of the mandible towards the resected site. Various prosthetic methods are employed to reduce or minimize mandibular deviation and improve and restore the lost functions and esthetic, like maxillomandibular fixation, implant supported prosthesis, removable mandibular guide flange prosthesis, and palatal based guidance restoration. This clinical report describes the rehabilitation of a patient following segmental mandibulectomy using palatal ramp prosthesis.

  14. Retentive strength of fiber-reinforced composite posts with composite resin cores: Effect of remaining coronal structure and root canal dentin conditioning protocols.

    Science.gov (United States)

    Saker, Samah; Özcan, Mutlu

    2015-12-01

    The prognosis of a fixed dental prosthesis cemented to endodontically treated teeth is primarily determined by the presence of a ferrule on the tooth. Adhesion of the post in the root canal, conditioning methods for the canal and the amount of coronal structure could also be decisive on survival of reconstructions cemented on endodontically treated teeth. The purpose of this in vitro study was to test the effect of remaining coronal structure on the retention of airborne-particle abraded fiber-reinforced composite resin posts built up with composite resin cores after the treatment of root canal dentin with different conditioning protocols. One hundred and fifty extracted human teeth with single root canal space were endodontically treated and divided into 3 groups as follows: group CEJ: the teeth were sectioned at the level of cementoenamel junction (CEJ); group CEJ1: the teeth were sectioned 1 mm above the CEJ; group CEJ2: the teeth were sectioned 2 mm above the CEJ. Each group was further divided into 5 subgroups (n=10 per group) according to the root canal treatments as follows: group C: no conditioning (control); group PH: conditioning with 37% phosphoric acid gel for 15 seconds; group E: conditioning with 17% ethylenediaminetetraacetic acid (EDTA) for 60 seconds; group CHX: conditioning with 2% chlorhexidine (CHX) for 60 seconds; group Q: conditioning with combination of 2% CHX with 17% EDTA and a surfactant solution for 60 seconds. Glass fiber-reinforced composite resin posts were airborne-particle abraded and luted to the root canal dentin with a self-adhesive resin cement (RelyX Unicem). The retentive force was tested by applying a tensile load parallel to the long axis of these posts at a crosshead speed of 2 mm/min. Two-way ANOVA and the Tukey HSD post hoc test were used to analyze the data. The highest retention (N) was obtained with the CHX-EDTA conditioned group (374.7 ±29.8) followed by 17% EDTA (367.9 ±33.3) conditioning when 2 mm remaining

  15. Closing a chapter on Love Canal

    Energy Technology Data Exchange (ETDEWEB)

    1987-11-01

    The toxic wastes that were dumped in the 1950s at Love Canal in New York and then seeped into groundwater and the basements of local residents in the late 1970s are to be finally incinerated, according to a plan recently announced by the US Environmental Protection Agency (EPA). This last, five-year stage in the cleanup will entail the building of an incinerator for burning 35,000 cubic yards of dioxin-contaminated sediment dredged from creeks and sewers in the area at a cost of up to $31 million. The incinerated residue - which will be purified of detectable levels of dioxin, says EPA - will be returned to the site and spread several feet deep.

  16. 8. Le TGV et le canal

    OpenAIRE

    Fortier, Agnès

    2013-01-01

    7. Le TGV près du Creusot Une double rame du tgv Sud-Est se dirige vers Paris. Elle vient de franchir le viaduc du canal du Centre qui longe l’un de ses réservoirs d’alimentation, l’étang de Longpendu, visible sur la droite. Elle croise la voie « plm » dont on note le discret ballast en avant de l’étang. Plusieurs lignes à très haute tension partent d’un important équipement de répartition tout proche. L’une d’elles sert notamment à l’alimentation du tgv. La photographie est prise d’un des ra...

  17. Seismically observed seiching in the Panama Canal

    Science.gov (United States)

    McNamara, D.E.; Ringler, A.T.; Hutt, C.R.; Gee, L.S.

    2011-01-01

    A large portion of the seismic noise spectrum is dominated by water wave energy coupled into the solid Earth. Distinct mechanisms of water wave induced ground motions are distinguished by their spectral content. For example, cultural noise is generally Panama Canal there is an additional source of long-period noise generated by standing water waves, seiches, induced by disturbances such as passing ships and wind pressure. We compare seismic waveforms to water level records and relate these observations to changes in local tilt and gravity due to an oscillating seiche. The methods and observations discussed in this paper provide a first step toward quantifying the impact of water inundation as recorded by seismometers. This type of quantified understanding of water inundation will help in future estimates of similar phenomena such as the seismic observations of tsunami impact. Copyright 2011 by the American Geophysical Union.

  18. CT in low back and sciatic pain due to lumbar canal osseous changes

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, M.; Capellini, C.; Canevari, M.A.; Prosetti, D.; Schiavoni, S.

    1986-05-01

    In a consecutive series of 600 patients scanned by CT for various spinal diseases, those with low back and sciatic pain without disc herniation were selected for study. The causes proved to be joint facet degeneration (32 cases), stenosis of the neural foramina (13 cases), stenosis of the spinal canal (13 cases), lateral recess stenosis (6 cases) and spondylolisthesis (6 cases). The predominance of joint fact pathology as the underlying cause of low back and sciatic pain in the absence of disc herniation is confirmed. CT scanning of the soft tissues as well as of the skeletal structures is crucial to the aetiological diagnosis of the condition under study and hence to the proper planning of treatment.

  19. MANAGEMENT OF LUMBAR SPINAL CANAL STENOSIS

    Directory of Open Access Journals (Sweden)

    Mukhergee G. S

    2016-06-01

    Full Text Available BACKGROUND Spinal stenosis is one of the most common conditions in the elderly. It is defined as a narrowing of the spinal canal. The term stenosis is derived from the Greek word for narrow, which is “Stenos”. The first description of this condition is attributed to Antoine portal in 1803. Verbiest is credited with coining the term spinal stenosis and the associated narrowing of the spinal canal as its potential cause. [1-10] Kirkaldy–Willis subsequently described the degenerative cascade in the lumbar spine as the cause for the altered anatomy and pathophysiology in spinal stenosis. [11-15] If compression does not occur, the canal should be described as narrow but not stenotic. Some studies defined lumbar spinal stenosis as a “narrowing of the osteoligamentous vertebral canal and/or the intervertebral foramina causing compression of the thecal sac and/or the caudal nerve roots; at a single vertebral level, narrowing may affect the whole canal or part of it” (Postacchini 1983. This definition distinguished between disc herniation and stenosis. [16] . The most common type of spinal stenosis is caused by degenerative arthritis of the spine. Hypertrophy and ossification of the posterior longitudinal ligament which usually are confined to the cervical spine, and diffuse idiopathic skeletal hyperostosis (DISH syndrome also may result in an acquired form of spinal stenosis. Congenital forms caused by disorders such as achondroplasia and dysplastic spondylolisthesis are much less common. Congenital spinal stenosis usually is central and is evident or imaging studies. Idiopathic congenital narrowing usually involves the anteroposterior dimension of the canal secondary to short pedicles; the patient otherwise is normal. In contrast, in achondroplasia, the canal is narrowed in the anteroposterior plane owing to shortened pedicles and in lateral dimension because of diminished interpedicular distance. Acquired forms of spinal stenosis usually are

  20. [Latest treatment of lumbar canal stenosis].

    Science.gov (United States)

    Kim, Kyongsong; Isu, Toyohiko

    2009-06-01

    Lumbar canal stenosis (LCS) is a degenerative disease involving the lumbar vertebrae, discs, and ligamentum flavum that result in neurological deficit to some extent. The natural history of symptoms of LCS is highly important because they do not necessarily worsen with progressive degeneration. Therefore, a observation therapy is adopted for the treatment of this condition. Although invasive treatment is required for some patients, surgery cannot be performed solely on the basis of radiological findings and careful evaluation of neurological symptoms is necessary. In the event that spinal surgery is required, it is important to minimize degree of invasiveness; various devices and operative approaches and methods have been developed to this end. Our strategy for the surgical treatment of LCS involves microscopic decompression via a posterior approach. In our method, modified bilateral decompression via the splitting of the spinous process using an ultrasonic bone curette (SONOPET), and the results of this approach have been excellent. Our method is less invasive, facilitates the preservation of the paraspinal muscle, and represents a useful approach to posterior spinal elements. Our findings indicate that this method involves less muscle damage as compared to other methods. LCS should be differentiated from conditions other than those involving the spinal canal such as foraminal stenosis and far-out syndrome, piriformis syndrome, and tarsal tunnel syndrome. The incidence of these conditions is higher than appreciated and they present with neurological deficits similar to observed in LCS. Here, we report our criteria of operative indications for surger and the procedures that we developed for the treatment of LCS, based on a review of the available literature.

  1. Static analysis of C-shape SMA middle ear prosthesis

    Science.gov (United States)

    Latalski, Jarosław; Rusinek, Rafał

    2017-08-01

    Shape memory alloys are a family of metals with the ability to change specimen shape depending on their temperature. This unique property is useful in many areas of mechanical and biomechanical engineering. A new half-ring middle ear prosthesis design made of a shape memory alloy, that is undergoing initial clinical tests, is investigated in this research paper. The analytical model of the studied structure made of nonlinear constitutive material is solved to identify the temperature-dependent stiffness characteristics of the proposed design on the basis of the Crotti-Engesser theorem. The final integral expression for the element deflection is highly complex, thus the solution has to be computed numerically. The final results show the proposed shape memory C-shape element to behave linearly in the analysed range of loadings and temperatures. This is an important observation that significantly simplifies the analysis of the prototype structure and opens wide perspectives for further possible applications of shape memory alloys.

  2. A provisional fixed partial denture for an implant prosthesis.

    Science.gov (United States)

    Hansen, Paul A; Kim, Eunghwan

    2010-01-01

    This article presents a technique for fabricating an esthetic provisional restoration on multiple implants. Fabricating a provisional restoration allows the dentist to make a replica of the desired restoration. The incisal edge can be placed for esthetics and function in the new provisional restoration, allowing patients to evaluate comfort and test their ability to speak with the contour of the provisional restoration. Patients can evaluate both the ease of cleaning the restoration and how tissue esthetics can be duplicated to their satisfaction. By adding acrylic resin to or removing it from the provisional, the dentist can easily change the restoration until the patient is satisfied with the esthetic and functional result. This technique will allow the dentist to fabricate the provisional prosthesis quickly, while the patient is in the chair.

  3. PARS PLANA VITRECTOMY THROUGH A CUSTOM FLEXIBLE IRIS PROSTHESIS.

    Science.gov (United States)

    Toygar, Okan; Snyder, Michael E; Riemann, Christopher D

    2016-08-01

    To demonstrate the outcomes of pars plana vitrectomy in patients with custom flexible iris prosthesis (CFIP). The medical records of patients who underwent CFIP placement were retrospectively reviewed. Patients who underwent pars plana vitrectomy concurrent with or after placement of CFIP were identified. Preoperative, intraoperative, and postoperative parameters were analyzed. Surgeons were surveyed regarding the technical aspects of the vitreoretinal surgery. Outcome measures included: anatomic success, complications, surgeon-rated ease of visualization through CFIP during pars plana vitrectomy, and Snellen best-corrected visual acuity. Twenty-four surgeries were performed in 20 eyes of 20 patients. Postoperative best-corrected visual acuity improved in 11 eyes (55%), remained unchanged in 5 eyes (25%), and declined in 4 eyes (20%) after a mean follow-up of 16.1 ± 16.\

  4. Evaluation of Strength in the ``Toronto'' Osseous-Prosthesis System

    Science.gov (United States)

    Giacomo, R.; Cicciã¹, M.; Dini, R.; Franceschini, G.; Maiorana, C.

    2010-06-01

    Several surgical techniques like are today available in order to recovery large bone defects of the jaw. Aim of the surgeon is to obtain a good tridimensional volume to place dental implant and to recovery the patient’s aesthetics and function. Several prosthetic solution were considered for prosthetic rehabilitation. However after a bone graft surgery Toronto screwed prosthesis on dental implants, following Branemark intuitions, was considered the better prosthetic rehabilitation solution. According to Wölff, the dental implants osteointegration is related to the strengths directed to mandibular bone. Our investigation’s aim is to underline through FEM analysis the stress over the prosthetic elements and over bone surface in order to help the surgeon choice about the dental implant positioning, and at the same time reducing the bone trauma on the patients.

  5. [Infection of a hip prosthesis after dry needling].

    Science.gov (United States)

    Steentjes, Koen; de Vries, Lieke M A; Ridwan, Ben U; Wijgman, A J Jurgen

    2016-01-01

    A 57-year-old patient presented to the orthopaedic department with hip pain 7 months after hip replacement and two weeks after dry needling by a physiotherapist. Dry needling is used by physiotherapists to treat pain and stiffness. In the Netherlands, there are no clear guidelines or contra-indications described for this treatment. The surgical scar of our patient showed signs of inflammation for which debridement and irrigation were performed. Tissue samples showed positive bacterial cultures and the patient was treated with antibiotics. One week after completing this treatment, the infection returned. Debridement and irrigation were repeated and antibiotic treatment was recommenced. Three months later, the patient showed no signs of infection with the prosthesis still in situ. Although there is no strong evidence for a causal relationship between dry needling and the infection, dry needling should be used carefully in patients with a joint replacement, due to the increased risk of infection.

  6. Comparison of two canal preparation techniques using mtwo rotary instruments.

    Science.gov (United States)

    Hamze, Faeze; Honardar, Kiamars; Nazarimoghadam, Kiumars

    2011-01-01

    Root canal preparation is an important process in endodontic therapy. Nickel-titanium (NiTi) rotary file system can be used in single length technique (simultaneous technique) without early coronal enlargement, as well as in crown-down method. The purpose of this in vitro study was to compare single length with crown-down methods' shaping ability using Mtwo NiTi files. Fifteen acrylic-resin blocks containing simulated canals were divided into two experimental groups. In group A, single length technique was used and in group B root canals were prepared by crown-down technique. Pre- and post-preparation canals were photographed in a standardized manner and were superimposed. The inner and outer walls of canal curvature were evaluated at three points (apical, middle and coronal) to determine the greatest change. The data was statistically analyzed using the Student t-test by Statistical Analysis System (SAS) software. Statistical analysis revealed that in group B, dentine was equally removed within the canal coronal to the curvature, whereas in group A, the inner wall was predominantly removed (Plength method and crown-down technique using Mtwo for preparation of apical and middle portion of canal curvature.

  7. Laser scanning dental probe for endodontic root canal treatment

    Science.gov (United States)

    Blank, Molly A. B.; Friedrich, Michal; Hamilton, Jeffrey D.; Lee, Peggy; Berg, Joel; Seibel, Eric J.

    2011-03-01

    Complications that arise during endodontic procedures pose serious threats to the long-term integrity and health of the tooth. Potential complexities of root canals include residual pulpal tissue, cracks, mesial-buccal 2 and accessory canals. In the case of a failed root canal, a successful apicoectomy can be jeopardized by isthmuses, accessory canals, and root microfracture. Confirming diagnosis using a small imaging probe would allow proper treatment and prevent retreatment of endodontic procedures. An ultrathin and flexible laser scanning endoscope of 1.2 to 1.6mm outer diameter was used in vitro to image extracted teeth with varied root configurations. Teeth were opened using a conventional bur and high speed drill. Imaging within the opened access cavity clarified the location of the roots where canal filing would initiate. Although radiographs are commonly used to determine the root canal size, position, and shape, the limited 2D image perspective leaves ambiguity that could be clarified if used in conjunction with a direct visual imaging tool. Direct visualization may avoid difficulties in locating the root canal and reduce the number of radiographs needed. A transillumination imaging device with the separated illumination and light collection functions rendered cracks visible in the prepared teeth that were otherwise indiscernible using reflected visible light. Our work demonstrates that a small diameter endoscope with high spatial resolution may significantly increase the efficiency and success of endodontic procedures.

  8. Management of middle mesial canal in mandibular second molar

    Directory of Open Access Journals (Sweden)

    J V Karunakaran

    2012-01-01

    Full Text Available The primary objective of endodontic therapy is to achieve a three-dimensional obturation of the root canal space after adequate preparation of the canal space to remove the tissue debris, microorganisms, and their byproducts. Anatomical variations have frequently been encountered in endodontic practice and have to be adequately managed by the clinician. Missed roots and canals are a major reason for failure of therapy. Technological advances have given the clinician ample opportunity to identify and treat these aberrations successfully. The present report describes a left mandibular second permanent molar requiring root canal treatment, found to have three separate canals in the mesial root. This case demonstrates a rare anatomical configuration and emphasizes the need for the clinician to be aware of and look out for such variations and use adequate diagnostic methodologies prior to and during therapy to detect such variations. The possibility of additional canals, whenever in doubt, should be explored with the assistance of technologies such as those of magnification and illumination and various diagnostic aids. Operator experience has also shown to be a key factor in negotiation and management of these aberrant canal configurations.

  9. Variations in the Anatomical Structures of the Guyon Canal.

    Science.gov (United States)

    Fadel, Zahir T; Samargandi, Osama A; Tang, David T

    2017-05-01

    Compression neuropathy of the ulnar nerve at the Guyon canal is commonly seen by hand surgeons. Different anatomical variations of structures related to the Guyon canal have been reported in the literature. A thorough knowledge of the normal contents and possible variations is essential during surgery and exploration. To review the recognized anatomical variations within and around the Guyon canal. This study is a narrative review in which relevant papers, clinical studies, and anatomical studies were selected by searching electronic databases (PubMed and EMBASE). Extensive manual review of references of the included studies was performed. We also describe a case report of an aberrant muscle crossing the Guyon canal. This study identified several variations in the anatomical structures of the Guyon canal reported in the literature. Variations of the ulnar nerve involved its course, branching pattern, deep motor branch, superficial sensory branch, dorsal cutaneous branch, and the communication with the median nerve. Ulnar artery variations involved its course, branching pattern, the superficial ulnar artery, and the dorsal perforating artery. Aberrant muscles crossing the Guyon canal were found to originate from the antebrachial fascia, pisiform bone, flexor retinaculum, the tendon of palmaris longus, flexor carpi ulnaris, or flexor carpi radialis; these muscles usually fuse with the hypothenar group. The diverse variations of the contents of the Guyon canal were adequately described in the literature. Taking these variations into consideration is important in preventing clinical misinterpretation and avoiding potential surgical complications.

  10. Modeling and measurement of root canal using stereo digital radiography

    Science.gov (United States)

    Analoui, Mostafa; Krisnamurthy, Satthya; Brown, Cecil

    2000-04-01

    Determining root canal length is a crucial step in success of root canal treatment. Root canal length is commonly estimated based on pre-operation intraoral radiography. 2D depiction of a 3D object is the primary source of error in this approach. Techniques based on impedance measurement are more accurate than radiographic approaches, but do not offer a method for depicting the shape of canal. In this study, we investigated a stererotactic approach for modeling and measurement of root canal of human dentition. A weakly perspective model approximated the projectional geometry. A series of computer-simulated objects was used to test accuracy of this model as the first step. The, to assess the clinical viability of such an approach, endodontic files inserted in the root canal phantoms were fixed on an adjustable platform between a radiographic cone and an image receptor. Parameters of projection matrix were computed based on the relative positions of image receptors, focal spot, and test objects. Rotating the specimen platform from 0 to 980 degrees at 5-degree intervals set relative angulations for stereo images. Root canal is defined as the intersection of two surfaces defined by each projection. Computation of error for length measurement indicates that for angulations greater than 40 degrees the error is within clinically acceptable ranges.

  11. [Multicentre study of infection incidence in knee prosthesis].

    Science.gov (United States)

    Jaén, F; Sanz-Gallardo, M I; Arrazola, M P; García de Codes, A; de Juanes, A; Resines, C

    2012-01-01

    To determine the incidence of surgical site infection in knee prosthesis surgical procedure for a follow-up period of one year in twelve hospitals in Madrid region. A prospective study was carried out from January to December 2009 using a national surveillance system called Indicadores Clínicos de Mejora Continua de Calidad. Primary and revision knee joint replacements in patients operated on in the previous year were included. Criteria used to define surgical site infection and patient risk index categories were those established by the Centers for Disease Control and Prevention and National Nosocomial Infections Surveillance. The incidence rates were worked out crude and adjusted by hazard ratio. 2,088 knee prosthesis procedures were analyzed. The overall incidence of surgical site infection was 2.1%. Sixty-five percent of the infections were organ/space. Sixty percent of the infections were identified in the early postoperative period. Of all surgical site infections, 41.9% were microbiologically confirmed. Antibiotic prophylaxis was implemented correctly in 63.3% of the cases. The most important cause of inappropriate prophylaxis was an unsuitable duration in 85.7% of the cases. The presurgical preparation was carried out correctly in 50.3% of surgical operations. The incidence of knee arthroplasty infection was twice as high as in the National Healthcare Safety Network and similar to national rates. In this study, the incidence of infection was within the range of infection rates in other published European studies. Surveillance and control strategies of health care for associated infections allow us to assess trends and the impact of preventive measures. Copyright © 2011 SECOT. Published by Elsevier Espana. All rights reserved.

  12. Radial head replacement with pyrocarbon prosthesis: early clinical results.

    Science.gov (United States)

    Abdulla, Irfan N; Molony, Diarmuid C; Symes, Michael; Cass, Benjamin

    2015-05-01

    Comminuted radial head fractures are challenging to treat with open reduction and internal fixation. Radial head arthroplasty is a favourable technique for the treatment of complex radial head fractures. The purpose of this study was to evaluate the functional and radiological outcomes of radial head arthroplasty using modular pyrocarbon radial head prosthesis. We retrospectively reviewed 21 consecutive patients requiring radial head arthroplasty for unreconstructible radial head fractures between July 2003 and July 2009. Patients completed a Short Form-36 (SF-36), the Disabilities of the Arm, Shoulder and Hand questionnaire, and the Mayo Elbow Performance Index. Patients were independently physically examined and their post-operative radiographs were reviewed. Twenty-one patients (nine males and 12 females) were reviewed at a minimum of 12 months follow-up. The mean Disabilities of the Arm, Shoulder and Hand score was 10.8 (0-34.1), mean SF-36 physical score was 76.9 (35-96), mean SF-36 mental score was 83.8 (60-94), and their Mayo Elbow Performance Index score was 86.4 (70-100). Patients maintained 90% of their grip strength when compared with their uninjured arm and had 17.5° of fixed flexion in the affected arm. Radiologically, 14 cases had some degree of post-traumatic osteoarthritis, 12 cases had evidence of heterotrophic ossification, five had some evidence of periprosthetic lucency and three patients were radiologically, but not functionally 'overstuffed'. Radial head arthroplasty with pyrocarbon radial head prosthesis is an acceptable option when treating unreconstructable radial head fractures yielding good functional and radiological outcomes. © 2014 Royal Australasian College of Surgeons.

  13. Dorsal Phalloplasty to Preserve Penis Length after Penile Prosthesis Implantation.

    Science.gov (United States)

    Shaeer, Osama; Shaeer, Kamal; Rahman, Islam A

    2017-02-01

    Following penile prosthesis implantation (PPI), patients may complain of a decrease in visible penis length. A dorsal phalloplasty defines the penopubic junction by tacking pubic skin to the pubis, revealing the base of the penis. This study aimed to evaluate the efficacy of a dorsal phalloplasty in increasing the visible penis length following PPI. An inflatable penile prosthesis was implanted in 13 patients with severe erectile dysfunction (ED) at the Kamal Shaeer Hospital, Cairo, Egypt, from January 2013 to May 2014. During the surgery, nonabsorbable tacking sutures were used to pin the pubic skin to the pubis through the same penoscrotal incision. Intraoperative penis length was measured before and after the dorsal phalloplasty. Overall patient satisfaction was measured on a 5-point rating scale and patients were requested to subjectively compare their postoperative penis length with memories of their penis length before the onset of ED. Intraoperatively, the dorsal phalloplasty increased the visible length of the erect penis by an average of 25.6%. The average length before and after tacking was 10.2 ± 2.9 cm and 13.7 ± 2.8 cm, respectively (P <0.002). Postoperatively, seven patients (53.8%) reported a longer penis, five patients (38.5%) reported no change in length and one patient (7.7%) reported a slightly shorter penis. The mean overall patient satisfaction score was 4.9 ± 0.3. None of the patients developed postoperative complications. A dorsal phalloplasty during PPI is an effective method of increasing visible penis length, therefore minimising the impression of a shorter penis after implantation.

  14. Antibacterial activity of different root canal sealers against Enterococcus faecalis

    Science.gov (United States)

    Trovati, Federico; Ceci, Matteo; Colombo, Marco; Pietrocola, Giampiero

    2017-01-01

    Background The aim of the present study was to compare in vitro the antimicrobial activity of different root canal sealers against Enterococcus faecalis, prior and subsequent to setting. Material and Methods Agar diffusion test (ADT) was used for evaluating the antibacterial activity of non-set sealer while the direct contact test (DCT) was used for after setting. Results ADT: Except for TotalFill BC Sealer all the others sealers tested showed antibacterial activity. BioRoot™RCS, MTA Fillapex and Sealapex Root Canal Sealer showed the lowest antibacterial activity, a significant increase in antibacterial effect for both Pulp Canal Sealer™ and AH plus sealers were found. Significantly higher were the mean diameters of the bacterial inhibition zone by both EasySeal or N2 sealers. DCT: AH plus and Sealapex Root Canal Sealer doesn’t show any bactericidal effect after 6 min of contact. After 15 and 60 min of contact a significant increment for AH plus and for Sealapex Root Canal Sealer of the bactericidal effect was found. Significantly much higher was the antibacterial effect of Sealapex Root Canal Sealer compare to that observed for AH plus. BioRootTMRCS, MTA Fillapex, Pulp Canal Sealer™ and N2 showed at least means of the number of colonies formed in milliliter after 6 min of contact. Except for N2, a significant increase in bactericidal effect after 15 and 60 min for the other compared sealers (BioRootTMRCS, MTA Fillapex and Pulp Canal Sealer™). Conclusions For every contact times considered, both TotalFill BC Sealer and EasySeal were bactericidal against E. faecalis and killed all bacteria. Key words:Agar diffusion test, antibacterial activity, direct contact test, Enterococcus faecalis, root canal sealer. PMID:28638549

  15. Morphologic features of biocompatibility and neoangiogenesis onto a biodegradable tracheal prosthesis in an animal model

    National Research Council Canada - National Science Library

    Brizzola, Stefano; de Eguileor, Magda; Brevini, Tiziana; Grimaldi, Annalisa; Congiu, Terenzio; Neuenschwander, Peter; Acocella, Fabio

    2009-01-01

    ... (Degrapol ® ) tracheal prosthesis in an in-vivo angiogenesis-inducing animal model focusing on the specific tissue reaction, the neo-angiogenesis and also the eventual cathepsin B role during the polymer degradation...

  16. Effect of silicone gel breast prosthesis on electron and photon dose distributions

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, L.; St. George, F.J.; Mansfield, C.M.; Krishnan, E.C.

    1983-01-01

    The effect of a silicone gel breast prosthesis on the absorbed dose distribution of 9--20 MeV electron beams and 1.25--15 MV photon beams was studied. Compared to water measurements, at depths smaller than the practical range of the electron beams, the central axis depth dose values below the prothesis were lower for all energies by as much as 3.5%. However, at depths near the practical range, the central axis depth dose values for the prosthesis were greater than that of water by as much as 33%. Since this occurs near the end of the electron range, the resultant difference may not be clinically significant. Results of the effect of breast prosthesis on photon depth dose distributions reveal that no clinically significant perturbation is produced by the breast prosthesis using Co-60, 6- and 15-MV radiations.

  17. 21 CFR 888.3180 - Elbow joint humeral (hemi-elbow) metallic uncemented prosthesis.

    Science.gov (United States)

    2010-04-01

    ... humeral (hemi-elbow) metallic uncemented prosthesis is a device intended to be implanted made of alloys, such as cobalt-chromium-molybdenum, that is used to replace the distal end of the humerus formed by the...

  18. Restoration of an atrophic eye socket with custom made eye prosthesis, utilizing digital photography.

    Science.gov (United States)

    Jayaswal, Gaurav P; Dange, S P; Khalikar, A N

    2011-01-01

    Ocular defects may cause several ocular and orbital disorders, which require surgical intervention. These defects are psychologically disturbing for the patients, and therefore, they require immediate management and rehabilitation by a team of specialist. Ocular prosthesis may be either readymade (stock) or custom made. Fabrication of a custom ocular prosthesis allows for a range of variations during construction. The iris can also be custom made by ocular painting or by digital photography. The optimum cosmetic and functional results of a custom-made prosthesis enhance the patient's rehabilitation to a normal life style. This paper elaborates the technique for fabrication of a custom-made ocular prosthesis for an atrophic eye socket utilizing digital photography.

  19. Restoration of an atrophic eye socket with custom made eye prosthesis, utilizing digital photography

    Directory of Open Access Journals (Sweden)

    Gaurav P Jayaswal

    2011-01-01

    Full Text Available Ocular defects may cause several ocular and orbital disorders, which require surgical intervention. These defects are psychologically disturbing for the patients, and therefore, they require immediate management and rehabilitation by a team of specialist. Ocular prosthesis may be either readymade (stock or custom made. Fabrication of a custom ocular prosthesis allows for a range of variations during construction. The iris can also be custom made by ocular painting or by digital photography. The optimum cosmetic and functional results of a custom-made prosthesis enhance the patient′s rehabilitation to a normal life style. This paper elaborates the technique for fabrication of a custom-made ocular prosthesis for an atrophic eye socket utilizing digital photography.

  20. Rehabilitation of a Partial Nasal Defect with Facial Prosthesis: A Case Report

    Directory of Open Access Journals (Sweden)

    Ramin Negahdari

    2014-12-01

    Full Text Available Malignancies of the midface result in cosmetic deformities that make maxillofacial prosthesis as an integral part of the treatment plan. Facial defects can be devastating in their impact on physical structure and function of the affected individual, leading to potentional compromises in quality of life. Reconstruction of nasal defects is a challenge for the prosthodontist because of esthetic and retention problems associated with the facial prosthesis. This paper reports the rehabilitation of a partial nasal defect caused by basal cell carcinoma treatment using a nasal prosthesis made with silicone elastomers and mechanical and anatomical retentive aids. The patient had no problem with the prosthesis, except for a partial loss of extrinsic coloration in the two-year follow-up.

  1. EXPERIENCE WITH IN ON-X PROSTHESIS IN HEART VALVE REPLACEMENT

    Directory of Open Access Journals (Sweden)

    M. A. Sazonenkov

    2010-01-01

    Full Text Available The prosthesis ON-X carcas has advantages in implantation commodity and safety, effective orifice area. We pe- sent results of this prosthesis usage during perioud of 2006–2009 years. This time 792 operations with AC were completed. In mitral position were implanted 132 (91,7% prostheses ON-X. Of them 80 (60,6% valves were sutured with complete or partial preservation of posterior leaflet and 26 (19,7% valves – with total MV preser- vation. In aortic position we implanted 76 (53,9% valves ON-X. Only 3 cases needed posterior aortoplasty for the N 23 prosthesis implantation. In perioperative and late postoperative periods we didn’t meet prostheses thrombosis or dysfunction. Reoperati- ons for high prosthesis gradients didn’t occur in postoperative period. Late postoperatively there were 3 (1,1% cases of embolic events related to the incorrect anticoagulant treatment. 

  2. Design of a power-asymmetric actuator for a transtibial prosthesis.

    Science.gov (United States)

    Bartlett, Harrison L; Lawson, Brian E; Goldfarb, Michael

    2017-07-01

    This paper presents the design and characterization of a power-asymmetric actuator for a transtibial prosthesis. The device is designed to provide the combination of: 1) joint locking, 2) high power dissipation, and 3) low power generation. This actuator functionality allows for a prosthesis to be designed with minimal mass and power consumption relative to a fully-powered robotic prosthesis while maintaining much of the functionality necessary for activities of daily living. The actuator achieves these design characteristics while maintaining a small form factor by leveraging a combination of electromechanical and hydraulic components. The design of the actuator is described herein, and results of an experimental characterization are provided that indicate that the actuator is capable of providing the functional capabilities required of an ankle prosthesis in a compact and lightweight package.

  3. Dual Window Pattern Recognition Classifier for Improved Partial-Hand Prosthesis Control

    National Research Council Canada - National Science Library

    Earley, Eric J; Hargrove, Levi J; Kuiken, Todd A

    2016-01-01

    Although partial-hand amputees largely retain the ability to use their wrist, it is difficult to preserve wrist motion while using a myoelectric partial-hand prosthesis without severely impacting control performance. Electromyogram (EMG...

  4. Visual and Non-Visual Navigation in Blind Patients with a Retinal Prosthesis: e0134369

    National Research Council Canada - National Science Library

    Sara Garcia; Karin Petrini; Gary S Rubin; Lyndon Da Cruz; Marko Nardini

    2015-01-01

    .... Here we asked whether blind individuals treated with a retinal prosthesis could also benefit from using the resultant new visual signal together with non-visual information when navigating. Four patients...

  5. Visual and Non-Visual Navigation in Blind Patients with a Retinal Prosthesis

    National Research Council Canada - National Science Library

    Garcia, Sara; Petrini, Karin; Rubin, Gary S; Da Cruz, Lyndon; Nardini, Marko

    2015-01-01

    .... Here we asked whether blind individuals treated with a retinal prosthesis could also benefit from using the resultant new visual signal together with non-visual information when navigating. Four patients...

  6. Esthetic transformation of a failed implant reconstruction to fixed-supported prosthesis: a case report.

    Science.gov (United States)

    Cascione, Domenico; Nowzari, Hessam; Reshad, Mamaly

    2012-06-01

    This article describes a clinical situation where an ill-fitting prosthesis supported by malpositioned dental implants was esthetically transformed to fixed definitive restorations. Provisional restorations were used as a blueprint for fabrication of definitive restorations.

  7. Microbial contamination of removable dental prosthesis at different interval of usage: An in vitro study

    Directory of Open Access Journals (Sweden)

    Vijita Vijay Nair

    2016-01-01

    Conclusion: There is a linear increase in microbial contamination of removable dental prosthesis as the duration of usage increases and might increase the susceptibility of individuals' to many diseases.

  8. Effects of prosthetic foot forefoot flexibility on gait of unilateral transtibial prosthesis users

    National Research Council Canada - National Science Library

    Klodd, Elizabeth; Hansen, Andrew; Fatone, Stefania; Edwards, Mark

    2010-01-01

    Five solid-ankle experimental prosthetic feet were used in this double-blind randomized crossover study to determine the effects of forefoot flexibility on gait of 14 unilateral transtibial prosthesis users...

  9. [Effect of quality of root canal obturation on the long-term results of root canal therapy].

    Science.gov (United States)

    Zhu, Ya-ping; Zhu, Ya-qin; Fan, Lin-feng; DU, Rong; Gu, Ying-xin; Qin, Feng

    2007-06-01

    The purpose of this study was to analyze the quality of obturation affecting the long-term results of root canal therapy (RCT) by radiographic evaluation. Teeth of RCT for 2 or more than 2 years were chosen, and periapical radiographs were taken with paralleling technique. The patients' age, gender, etiology, the time of therapy were recorded. The current apical periodontal status of these endodontically treated teeth were examined and recorded. The data were subjected to univariate and multivariate analysis with SPSS13.0 software package. This study investigated 215 cases with 376 endodontically treated teeth. The success rate was 54.79%. If counted by root canal, there were 513 root canals, the success rate was 61.4%. The quality of obturation including obturation position and obturation density affected significantly the results of root canal therapy (Pobturation position for successful treated canals was 0.5-2mm from the radiographic apex. The success rate was higher for a good obturation density, especially in the apical third. No statistically significant differences were found based on gender, age and obturation time. The quality of root canal obturation significantly affected the long-term results of root canal therapy.

  10. A scanning electron microscopy evaluation of the cleanliness of un-instrumented areas of canal walls after root canal preparation

    Directory of Open Access Journals (Sweden)

    Abdullah J Dohaithem

    2015-01-01

    Full Text Available Introduction: Cleanliness of the canal space is the ultimate goal of its preparation. Nevertheless, some portion of the canal walls are left un-instrumented during preparation. Therefore, the aim of this ex vivo study was to evaluate the cleanliness of un-instrumented canal walls after root canal preparation for the presence or absence of debris and smear layer. Materials and Methods: A total of 24 single-rooted extracted teeth were prepared with the crown-down technique using Protaper universal rotary file system. Micro-computed tomography (micro-CT was used to scan the specimens before and after instrumentation. The un-instrumented area was measured and localized. The roots were split longitudinally and then subjected to scanning electron microscopy (SEM. The presence of debris and smear layer in the instrumented and un-instrumented areas of the canal were evaluated by analysing the SEM images with a five-score evaluation system based on the reference photographs. Results: High levels of root canal cleanliness (≤ score 2 were found for the instrumented areas were detected (P = 0.003. Conclusions: Under the condition of this study, un-instrumented areas of the canal were less clean in comparison to instrumented portion.

  11. Head movements evoked in alert rhesus monkey by vestibular prosthesis stimulation: implications for postural and gaze stabilization.

    Directory of Open Access Journals (Sweden)

    Diana E Mitchell

    Full Text Available The vestibular system detects motion of the head in space and in turn generates reflexes that are vital for our daily activities. The eye movements produced by the vestibulo-ocular reflex (VOR play an essential role in stabilizing the visual axis (gaze, while vestibulo-spinal reflexes ensure the maintenance of head and body posture. The neuronal pathways from the vestibular periphery to the cervical spinal cord potentially serve a dual role, since they function to stabilize the head relative to inertial space and could thus contribute to gaze (eye-in-head + head-in-space and posture stabilization. To date, however, the functional significance of vestibular-neck pathways in alert primates remains a matter of debate. Here we used a vestibular prosthesis to 1 quantify vestibularly-driven head movements in primates, and 2 assess whether these evoked head movements make a significant contribution to gaze as well as postural stabilization. We stimulated electrodes implanted in the horizontal semicircular canal of alert rhesus monkeys, and measured the head and eye movements evoked during a 100 ms time period for which the contribution of longer latency voluntary inputs to the neck would be minimal. Our results show that prosthetic stimulation evoked significant head movements with latencies consistent with known vestibulo-spinal pathways. Furthermore, while the evoked head movements were substantially smaller than the coincidently evoked eye movements, they made a significant contribution to gaze stabilization, complementing the VOR to ensure that the appropriate gaze response is achieved. We speculate that analogous compensatory head movements will be evoked when implanted prosthetic devices are transitioned to human patients.

  12. Load applied on bone-anchored transfemoral prosthesis: Characterization of a prosthesis—A pilot study

    OpenAIRE

    Laurent Frossard, PhD; Eva Häggström, CPO; Kerstin Hagberg, PhD; Rickard Brånemark, MD, PhD

    2013-01-01

    The objectives of this study were to (1) record the inner-prosthesis loading during activities of daily living (ADLs), (2) present a set of variables comparing loading data, and (3) provide an example of characterization of two prostheses. The load was measured at 200 Hz using a multi-axial transducer mounted between the residuum and the knee of an individual with unilateral transfemoral amputation fitted with a bone-anchored prosthesis. The load was measured while using two different prosthe...

  13. Testicular prosthesis: Patient satisfaction and sexual dysfunctions in testis cancer survivors

    Directory of Open Access Journals (Sweden)

    Francesco Catanzariti

    2016-10-01

    Full Text Available Purpose: We studied patient satisfaction about sexual activity after prosthesis implantation using validated questionnaires with the aim to discover if testicular prosthesis could be responsible of sexual dysfunctions (erectile dysfunction or premature ejaculation. Materials and Methods: We evaluated a total of 67 men who underwent radical orchiectomy for testicular cancer and a silicon testicular prosthesis implantation from January 2008 to June 2014 at our Hospital. These patients completed 5 validated questionnaires the day before orchiectomy and 6 months after surgery: the International Index of Erectile Function 5 (IIEF5, the Premature Ejaculation Diagnostic Tool (PEDT, the Body Exposure during Sexual Activities Questionnaire (BESAQ, the Body-Esteem Scale and the Rosenberg Self- Esteem Scale. We also evaluated 6 months after surgery any defects of the prosthesis complained by the patients. Results: The questionnaires completed by patients didn’t show statistically significant changes for erectile dysfunction (p > 0.05 and premature ejaculation (p > 0.05. On the contrary the psychological questionnaires showed statistically significant change for the BESAQ (p < 0.001 and the Body Esteem Scale (p < 0.001, but not for the Rosenberg Self-Esteem Scale (p > 0,05. A total of 15 patients (22.37% were dissatisfied about the prosthesis: the most frequent complaint (8 patients; 11.94% was that the prosthesis was firmer than the normal testis. Conclusions: Testicular prosthesis implantation is a safe surgical procedure that should be always proposed before orchiectomy for cancer of the testis. The defects complained by patients with testicular prosthesis are few, they don’t influence sexual activity and they aren’t able to cause erectile dysfunction or premature ejaculation.

  14. Implant-supported hybrid prosthesis: Conventional treatment method for borderline cases

    OpenAIRE

    Egilmez, Ferhan; Ergun, Gulfem; Cekic-Nagas, Isil; Bozkaya, Suleyman

    2015-01-01

    An implant-supported hybrid prosthesis is an acrylic resin complete fixed dental prosthesis and supported by implants might be a solution in extreme cases that the need of the restoration for esthetics, function, lip support, and speech. This clinical report aims to present the esthetic and functional prosthetic rehabilitation of three borderline cases with implant-supported hybrid prostheses. Patient 1 (62-year-old man) and Patient 2 (61-year-old man) presented a chief complaint of a comprom...

  15. Thrust plate prosthesis for proximal femoral deformity: a series of 15 patients

    OpenAIRE

    Karatosun, Vasfi; Ünver, Bayram; Gultekin, Alper; Gunal, Izge

    2011-01-01

    Objectives: Patients with coxarthrosis and proximal femoral deformity experience problems with total hip arthroplasty. A custom-made prosthesis or a proximal osteotomy is required for such cases, and these also increase the rate of complications. The purpose of this study was to evaluate the results of the thrust plate prosthesis (TPP) in patients with deformity of the proximal femur. Methods: Fifteen patients (7 females, 8 males) with a mean age of 56.4 years (range 19-75 years) at the...

  16. [Vascular access for haemodyalisis. Comparative analysis of the mechanical behaviour of native vessels and prosthesis].

    Science.gov (United States)

    Bia, D; Zócalo, Y; Armentano, R; Pérez, H; Cabrera, E; Saldías, M; Galli, C; Alvarez, I

    2006-01-01

    The prosthesis nowadays used in the vascular access for haemodialysis have low patency rates, mainly due to the luminal obstruction, determined by the intimal hyperplasia. Several factors have been related to de development of intimal hyperplasia and graft failure. Among them are the differences in the biomechanical properties between the prosthesis and the native vessels. In the searching for vascular prosthesis that overcomes the limitations of the currently used, the cryopreserved vessels (cryografts) appear as an alternative of growing interest. However, it is unknown if the mechanical differences or mismatch between prosthesis and native vessels are lesser when using cryografts. To characterize and compare the biomechanical behaviour of native vessels used in vascular access and cryografts. Additionally, segments of expanded polytetrafluoroethylene (ePTFE) were also evaluated, so as to evaluate the potential biomechanical advantages of the cryografts respect to synthetic prosthesis used in vascular access. Segments from human humeral (n = 12), carotid (n = 12) and femoral (n = 12) arteries, and saphenous vein (n = 12), were obtained from 6 multiorgan donors. The humeral arteries were studied in fresh state. The other segments were divided into two groups, and 6 segments from each vessel were studied in fresh state, while the remaining 6 segments were evaluated after 30 days of criopreservation. For the mechanical evaluation the vascular segments and 6 segments of ePTFE were mounted in a circulation mock and submitted to haemodynamic conditions similar to those of the in vivo. Instantaneous pressure (Konigsberg) and diameter (Sonomicrometry) were measured and used to calculate the viscous and elastic indexes, the compliance, distensibility and characteristic impedance. For each mechanical parameter studied, the mismatch between the prosthesis and the native vessel was evaluated. The ePTFE was the prosthesis with the higher mechanical mismatch (p vascular

  17. Computer modelling of the mechanical behaviour of the cervical spine segment and intervertebral disk prosthesis

    Science.gov (United States)

    Kolmakova, T. V.; Rikun, Y. A.

    2017-10-01

    The article describes the model of intervertebral disc prosthesis and the results of study of mechanical behavior of the cervical spine segment. The results show that degenerative changes in the intervertebral disc lead to a change in the location of the regions of maximum Mises stresses in cervical spine segment. The presented geometric model of the intervertebral disc prosthesis is based on the experimental sample of a ceramic endoprosthesis developed at the Institute of Strength Physics and Materials Science SB RAS.

  18. A Modified Design for Posterior Inlay-Retained Fixed Dental Prosthesis

    OpenAIRE

    Abdulaziz Samran; Mohammad Zakaria Nassani; Marwan Aswad; Amid Abdulkarim

    2015-01-01

    The aim of this paper is to report a clinical case with bilateral missing mandibular second premolars that were restored by metal-ceramic inlay-retained fixed dental prostheses. The first prosthesis was of a traditional design and the second was of a modified design. The suggested design is created by modifying the retainer wings of the traditional resin-bonded inlay-retained fixed dental prosthesis and covering the wings with composite resin. The modified design is relatively conservative, e...

  19. Candida albicans, Staphylococcus aureus and Streptococcus mutans colonization in patients wearing dental prosthesis.

    Science.gov (United States)

    Baena-Monroy, Tania; Moreno-Maldonado, Víctor; Franco-Martínez, Fernando; Aldape-Barrios, Beatriz; Quindós, Guillermo; Sánchez-Vargas, Luis Octavio

    2005-04-01

    Denture stomatitis is associated to Candida albicans, different bacteria and other co-factors such as an acid pH, a carbohydrate ingestion increase, different systemic illnesses and pharmacological treatments. The aim of this study was to determine Candida albicans, Staphylococcus aureus and Streptococcus mutans prevalence in the mucous membrane and prosthesis of patients with and without atrophic denture stomatitis and its relationship with other potential clinical co-factors. Saliva was collected from 105 patients (62 female and 43 male) wearing dental prosthesis in order to measure their pH. Oral samples of the mucous membrane and the internal surface of dental prosthesis were taken with sterile cotton to proceed with the microbiological study. The identification of the isolated microorganisms was performed using conventional microbiological methods. Diabetes and Hypertension were the most frequent systemic illnesses. High carbohydrate ingestion was observed in numerous patients. Atrophic denture stomatitis was reported in 50 patients and the pH average in saliva was of 5.2. The presence of C albicans, S. aureus and S. mutans in the mucous membrane and prosthesis was of 51.4%, 52.4% and 67.6%, respectively. C. albicans was isolated in 66.7% from the prosthesis, whereas S. aureus and S. mutans were isolated in 49.5% of those same prosthesis. C. albicans was isolated in 86% of the patients with atrophic denture stomatitis and S. aureus was isolated in a similar percentage (84% of patients). The isolation of S. mutans was less frequent, and it was observed in 16% of the oral samples of these patients. C. albicans, S. aureus and S. mutans frequently colonize the oral mucous of patients wearing dental prosthesis. This illness-bearing condition is more frequent in patients with denture stomatitis, even though dental prosthesis colonization is lower than in the oral mucous.

  20. Prosthesis-Patient Mismatch After Aortic Valve Replacement: Effect on Long-Term Survival.

    Science.gov (United States)

    Swinkels, Ben M; de Mol, Bas A; Kelder, Johannes C; Vermeulen, Freddy E; ten Berg, Jurriën M

    2016-04-01

    Mean follow-up in previous studies on the effect of prosthesis-patient mismatch on long-term survival after aortic valve replacement (AVR) is confined to a maximum of one decade. This retrospective longitudinal cohort study was performed to determine the effect on long-term survival of prosthesis-patient mismatch after AVR with a mean follow-up of almost two decades. Kaplan-Meier survival analysis was used to determine long-term survival after AVR in a cohort of 673 consecutive patients, divided into 163 patients (24.2%) with prosthesis-patient mismatch (indexed effective orifice area ≤ 0.85 cm(2)/m(2)) and 510 patients (75.8%) without prosthesis-patient mismatch (indexed effective orifice area >0.85 cm(2)/m(2)). Effective orifice area values of the prosthetic valves were retrieved from the literature or obtained from the charts of the prosthetic valve manufacturers. Cox multiple regression analysis was used to identify possible independent predictors, including prosthesis-patient mismatch, of decreased long-term survival. Median sizes of the implanted mechanical (n = 430) and biologic (n = 243) prostheses were 25 and 23 mm, respectively. Mean follow-up after AVR was 17.8 ± 1.8 years. Prosthesis-patient mismatch was not an independent predictor of decreased long-term survival (hazard ratio, 0.828; 95% confidence interval, 0.669 to 1.025; p = 0.083). Severe prosthesis-patient mismatch (indexed effective orifice area ≤ 0.65 cm(2)/m(2)), occurring in only 17 patients (2.5%), showed an insignificant trend toward decreased long-term survival (hazard ratio, 1.68; 95% confidence interval, 0.97 to 2.91; p = 0.066). Prosthesis-patient mismatch was not an independent predictor of decreased long-term survival after AVR. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.