WorldWideScience

Sample records for bulk solids handling

  1. Handling of bulk solids theory and practice

    CERN Document Server

    Shamlou, P A

    1990-01-01

    Handling of Bulk Solids provides a comprehensive discussion of the field of solids flow and handling in the process industries. Presentation of the subject follows classical lines of separate discussions for each topic, so each chapter is self-contained and can be read on its own. Topics discussed include bulk solids flow and handling properties; pressure profiles in bulk solids storage vessels; the design of storage silos for reliable discharge of bulk materials; gravity flow of particulate materials from storage vessels; pneumatic transportation of bulk solids; and the hazards of solid-mater

  2. Solidex 84 - modern technology in bulk solids handling

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Proceedings from Conference on solids handling. Sections which are of interest include coal and ash handling, and flow problems and explosion hazards in bulk handling plant. 14 papers have been abstracted separately.

  3. Proceedings of the technical program, powder and bulk solids handling and processing

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    A total of 56 papers were presented under the following headings: solids storage and silos; pneumatic conveying; particle size enlargement; particle separation; particle characterization; mechanical handling of bulk solids; bulk solids process control; hazards and safety aspects; fluidization and fluid particle technology; coal handling and storage; and bulk solids processing. 8 papers have been abstracted separately.

  4. Proceedings of the technical program: powder and bulk solids handling and processing

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    Papers are presented on the topic of powder and bulk solids handling under the following subject headings: computer applications; particle characterization; fluidization and fluid-particle technology; belt conveyors; pneumatic conveying; solids storage; particle size enlargement; flow metering and process monitoring and control; mechanical handling; solids processing; mixing and handling; separation technologies; solids feeding systems; particle rheology and solids systems flow; system safety considerations; size reduction. Relevant papers have been abstracted separately.

  5. Solidex 86 - modern technology in bulk solids handling

    Energy Technology Data Exchange (ETDEWEB)

    1986-01-01

    A total of 30 papers were presented covering the following topics: coal and ash handling; dust control and explosion hazards; pneumatic conveying; mechanical conveying; storage and wear; and weighing technology and automated materials handling. 15 papers have been abstracted separately.

  6. Proceedings of the technical program. Powder and bulk solids handling and processing

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    Papers are presented under the following session headings: powder system properties; computer applications, system instrumentation and control; fluidization and fluid-particle technology; solids feeders; filtration, separation and dust control; solids mixing and blending; powder production and processing; solids handling, discharge and flow improvement; safety considerations in solids handling and processing; solids drying; size reduction I; pneumatic conveying I; fractals and particle morphology; containers and storage systems; size reduction II; particle characterization; coal technology; belt conveyors; and pneumatic conveying II.

  7. Eco Issues in Bulk Materials Handling Technologies in Ports

    Directory of Open Access Journals (Sweden)

    Nenad Zrnić

    2011-09-01

    Full Text Available This paper deals with eco issues in bulk materials handling in ports. Solid, free-flowing materials are said to be in bulk. Bulk materials handling is very difficult, because it incorporates all the features of liquids, gasses and mass solids. Energy efficiency, dust emissions in nearby environment, dust explosions, jamming, noise, handling of hazardous materials and protection of materials from contamination are issues that will be considered in this paper. Here are also presented possible solutions for some of these issues

  8. Solid waste handling

    Energy Technology Data Exchange (ETDEWEB)

    Parazin, R.J.

    1995-05-31

    This study presents estimates of the solid radioactive waste quantities that will be generated in the Separations, Low-Level Waste Vitrification and High-Level Waste Vitrification facilities, collectively called the Tank Waste Remediation System Treatment Complex, over the life of these facilities. This study then considers previous estimates from other 200 Area generators and compares alternative methods of handling (segregation, packaging, assaying, shipping, etc.).

  9. Solidex 88: solids handling conference

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    Papers are presented under the session headings: BMHB (British Materials Handling Board) - tackling user problems; feeding pneumatic conveying systems - matching the hardware to the product; and solutions to some operational problems.

  10. Wet handling of solids using submersible pumps

    Energy Technology Data Exchange (ETDEWEB)

    Czarnota, Z.; Fahlgren, M.; Grainger, M. [ITT Flygt Slurry Laboratory, Soina (Sweden)

    1996-12-31

    A complete and efficient concept for handling solids in short distance pumping applications is described. The function of pump, mixer, agitator, and sump have been determined in experimental studies. The major factors that affect pump performance such as impeller design and slurry characteristics are discussed. The results apply to a range of applications in industry and mining. 10 refs., 6 figs.

  11. 75 FR 64585 - Bulk Solid Hazardous Materials: Harmonization With the International Maritime Solid Bulk Cargoes...

    Science.gov (United States)

    2010-10-19

    ... nonsubstantive changes, however, to correct grammar, internal paragraph references, and a temperature conversion... means the English version of the ``International Maritime Solid Bulk Cargoes Code'' published by...

  12. 14 CFR 420.65 - Handling of solid propellants.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Handling of solid propellants. 420.65....65 Handling of solid propellants. (a) A launch site operator shall determine the maximum total quantity of solid propellants and other solid explosives by class and division, in accordance with 49...

  13. Evidence for Bulk Ripplocations in Layered Solids

    Science.gov (United States)

    Gruber, Jacob; Lang, Andrew C.; Griggs, Justin; Taheri, Mitra L.; Tucker, Garritt J.; Barsoum, Michel W.

    2016-09-01

    Plastically anisotropic/layered solids are ubiquitous in nature and understanding how they deform is crucial in geology, nuclear engineering, microelectronics, among other fields. Recently, a new defect termed a ripplocation–best described as an atomic scale ripple–was proposed to explain deformation in two-dimensional solids. Herein, we leverage atomistic simulations of graphite to extend the ripplocation idea to bulk layered solids, and confirm that it is essentially a buckling phenomenon. In contrast to dislocations, bulk ripplocations have no Burgers vector and no polarity. In graphite, ripplocations are attracted to other ripplocations, both within the same, and on adjacent layers, the latter resulting in kink boundaries. Furthermore, we present transmission electron microscopy evidence consistent with the existence of bulk ripplocations in Ti3SiC2. Ripplocations are a topological imperative, as they allow atomic layers to glide relative to each other without breaking the in-plane bonds. A more complete understanding of their mechanics and behavior is critically important, and could profoundly influence our current understanding of how graphite, layered silicates, the MAX phases, and many other plastically anisotropic/layered solids, deform and accommodate strain.

  14. Bulk solitary waves in elastic solids

    Science.gov (United States)

    Samsonov, A. M.; Dreiden, G. V.; Semenova, I. V.; Shvartz, A. G.

    2015-10-01

    A short and object oriented conspectus of bulk solitary wave theory, numerical simulations and real experiments in condensed matter is given. Upon a brief description of the soliton history and development we focus on bulk solitary waves of strain, also known as waves of density and, sometimes, as elastic and/or acoustic solitons. We consider the problem of nonlinear bulk wave generation and detection in basic structural elements, rods, plates and shells, that are exhaustively studied and widely used in physics and engineering. However, it is mostly valid for linear elasticity, whereas dynamic nonlinear theory of these elements is still far from being completed. In order to show how the nonlinear waves can be used in various applications, we studied the solitary elastic wave propagation along lengthy wave guides, and remarkably small attenuation of elastic solitons was proven in physical experiments. Both theory and generation for strain soliton in a shell, however, remained unsolved problems until recently, and we consider in more details the nonlinear bulk wave propagation in a shell. We studied an axially symmetric deformation of an infinite nonlinearly elastic cylindrical shell without torsion. The problem for bulk longitudinal waves is shown to be reducible to the one equation, if a relation between transversal displacement and the longitudinal strain is found. It is found that both the 1+1D and even the 1+2D problems for long travelling waves in nonlinear solids can be reduced to the Weierstrass equation for elliptic functions, which provide the solitary wave solutions as appropriate limits. We show that the accuracy in the boundary conditions on free lateral surfaces is of crucial importance for solution, derive the only equation for longitudinal nonlinear strain wave and show, that the equation has, amongst others, a bidirectional solitary wave solution, which lead us to successful physical experiments. We observed first the compression solitary wave in the

  15. Tailoring Magnetic Properties in Bulk Nanostructured Solids

    Science.gov (United States)

    Morales, Jason Rolando

    Important magnetic properties and behaviors such as coercivity, remanence, susceptibility, energy product, and exchange coupling can be tailored by controlling the grain size, composition, and density of bulk magnetic materials. At nanometric length scales the grain size plays an increasingly important role since magnetic domain behavior and grain boundary concentration determine bulk magnetic behavior. This has spurred a significant amount of work devoted to developing magnetic materials with nanometric features (thickness, grain/crystallite size, inclusions or shells) in 0D (powder), 1D (wires), and 2D (thin films) materials. Large 3D nanocrystalline materials are more suitable for many applications such as permanent magnets, magneto-optical Faraday isolators etc. Yet there are relatively few successful demonstrations of 3D magnetic materials with nanoscale influenced properties available in the literature. Making dense 3D bulk materials with magnetic nanocrystalline microstructures is a challenge because many traditional densification techniques (HIP, pressureless sintering, etc.) move the microstructure out of the "nano" regime during densification. This dissertation shows that the Current Activated Pressure Assisted Densification (CAPAD) method, also known as spark plasma sintering, can be used to create dense, bulk, magnetic, nanocrystalline solids with varied compositions suited to fit many applications. The results of my research will first show important implications for the use of CAPAD for the production of exchange-coupled nanocomposite magnets. Decreases in grain size were shown to have a significant role in increasing the magnitude of exchange bias. Second, preferentially ordered bulk magnetic materials were produced with highly anisotropic material properties. The ordered microstructure resulted in changing magnetic property magnitudes (ex. change in coercivity by almost 10x) depending on the relative orientation (0° vs. 90°) of an externally

  16. Solid waste handling and decontamination facility

    Energy Technology Data Exchange (ETDEWEB)

    Lampton, R. E.

    1979-01-01

    The Title 1 design of the decontamination part of the SWH and D facility is underway. Design criteria are listed. A flowsheet is given of the solid waste reduction. The incinerator scrubber is described. Design features of the Gunite Tank Sludge Removal and a schematic of the sluicer, TV camera, and recirculating system are given. 9 figures. (DLC)

  17. Measurement of particulate concentrations produced during bulk material handling at the Tarragona harbor

    Energy Technology Data Exchange (ETDEWEB)

    Artinano, B.; Gomez-Moreno, F.J.; Pujadas, M.; Moreno, N.; Alastuey, A.; Querol, X.; Martin, F.; Guerra, A.; Luaces, J.A.; Basora, J. [CIEMAT, Madrid (Spain)

    2007-09-15

    Bulk material handling can be a significant source of particles in harbor areas. The atmospheric impact of a number of loading/unloading activities of diverse raw materials has been assessed from continuous measurements of ambient particle concentrations recorded close to the emission sources. Two experimental campaigns have been carried out in the Tarragona port to document the impact of specific handling operations and bulk materials. Dusty bulk materials such as silica-manganese powder, tapioca, coal, clinker and lucerne were dealt with during the experiments. The highest impacts on ambient particle concentrations were recorded during handling of clinker. For this material and silica-manganese powder, high concentrations were recorded in the fine grain size ({lt}2.5 {mu}m). The lowest impacts on particulate matter concentrations were recorded during handling of tapioca and lucerne, mainly in the coarse grain size (2-5-10 {mu} m). The effectiveness of several emission abatement measures, such as ground watering to diminish coal particle resuspension, was demonstrated to reduce ambient concentrations by up to two orders of magnitude. The importance of other good practices in specific handling operations, such as controlling the height of the shovel discharge, was also evidenced by these experiments. The results obtained can be further utilized as a useful experimental database for emission factor estimations.

  18. Analysis on approach of safeguards implementation at research reactor handling item count and bulk material

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Jo; Lee, Sung Ho; Lee, Byung Doo; Jung, Juang [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    KiJang research reactor (KJRR) will be constructed to produce the radioisotope such as Mo-99 etc., provide the neutron transmutation doping (NTD) service of silicon, and develop the core technologies of research reactor. In this paper, the features of the process and nuclear material flow are reviewed and the material balance area (MBA) and key measurement point (KMP) are established based on the nuclear material flow. Also, this paper reviews the approach on safeguards and nuclear material accountancy at the facility level for Safeguards-by-Design at research reactor handling item count and bulk material. In this paper, MBA and KMPs are established through the analysis on facility features and major process at KJRR handling item count and bulk material. Also, this paper reviews the IAEA safeguards implementation and nuclear material accountancy at KJRR. It is necessary to discuss the safeguards approach on the fresh FM target assemblies and remaining uranium in the intermediate level liquid wastes.

  19. 75 FR 34573 - Bulk Solid Hazardous Materials: Harmonization With the International Maritime Solid Bulk Cargoes...

    Science.gov (United States)

    2010-06-17

    ... Bulk MSDS Material Safety Data Sheet NCB National Cargo Bureau NEPA National Environmental Policy Act... material safety data sheet (MSDS) address some portions of proposed Sec. 148.60. We agree with the comment... in the form of an MSDS. e. One comment observed that, as proposed in the 1994 NPRM, Sec. 148.60(d...

  20. Solid-State Explosive Reaction for Nanoporous Bulk Thermoelectric Materials.

    Science.gov (United States)

    Zhao, Kunpeng; Duan, Haozhi; Raghavendra, Nunna; Qiu, Pengfei; Zeng, Yi; Zhang, Wenqing; Yang, Jihui; Shi, Xun; Chen, Lidong

    2017-09-29

    High-performance thermoelectric materials require ultralow lattice thermal conductivity typically through either shortening the phonon mean free path or reducing the specific heat. Beyond these two approaches, a new unique, simple, yet ultrafast solid-state explosive reaction is proposed to fabricate nanoporous bulk thermoelectric materials with well-controlled pore sizes and distributions to suppress thermal conductivity. By investigating a wide variety of functional materials, general criteria for solid-state explosive reactions are built upon both thermodynamics and kinetics, and then successfully used to tailor material's microstructures and porosity. A drastic decrease in lattice thermal conductivity down below the minimum value of the fully densified materials and enhancement in thermoelectric figure of merit are achieved in porous bulk materials. This work demonstrates that controlling materials' porosity is a very effective strategy and is easy to be combined with other approaches for optimizing thermoelectric performance. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Manufacturing Solid Dosage Forms from Bulk Liquids Using the Fluid-bed Drying Technology.

    Science.gov (United States)

    Qi, Jianping; Lu, Y I; Wu, Wei

    2015-01-01

    Solid dosage forms are better than liquid dosage forms in many ways, such as improved physical and chemical stability, ease of storage and transportation, improved handling properties, and patient compliance. Therefore, it is required to transform dosage forms of liquid origins into solid dosage forms. The functional approaches are to absorb the liquids by solid excipients or through drying. The conventional drying technologies for this purpose include drying by heating, vacuum-, freeze- and spray-drying, etc. Among these drying technologies, fluidbed drying emerges as a new technology that possesses unique advantages. Fluid-bed drying or coating is highly efficient in solvent removal, can be performed at relatively low temperatures, and is a one-step process to manufacture formulations in pellet forms. In this article, the status of the art of manufacturing solid dosage forms from bulk liquids by fluid-bed drying technology was reviewed emphasizing on its application in solid dispersion, inclusion complexes, self-microemulsifying systems, and various nanoscale drug delivery systems.

  2. 49 CFR 173.242 - Bulk packagings for certain medium hazard liquids and solids, including solids with dual hazards.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Bulk packagings for certain medium hazard liquids and solids, including solids with dual hazards. 173.242 Section 173.242 Transportation Other... medium hazard liquids and solids, including solids with dual hazards. When § 172.101 of this subchapter...

  3. A New Approach for Handling of Micro Parts in Bulk Metal Forming

    DEFF Research Database (Denmark)

    Mahshid, Rasoul; Hansen, Hans Nørgaard; Arentoft, M.

    2012-01-01

    During last 10 years a lot of research has been done in micro forming processes. In spite of the challenges micro forming has in process, material properties, tooling technology and machines, micro forming technology yields remarkable accuracy and good mechanical properties with high rate...... of production [1]. This can fulfill the demands for mass production and miniaturization in industries and academic communities. According to the recent studies, topics related to materials, process and simulation have been investigated intensively and well documented. Machines, forming tools and handling...... systems are critical elements to complete micro forming technology for transferring knowledge to industries and toward miniature manufacturing systems (micro factory) [2]. Since most metal forming processes are multi stage, making a new handling system with high reliability on accuracy and speed...

  4. Pharmaceutically active ionic liquids with solids handling, enhanced thermal stability, and fast release

    DEFF Research Database (Denmark)

    Bica, Katharina; Rodríguez, Héctor; Gurau, Gabriela

    2012-01-01

    Pharmaceutically active compounds in ionic liquid form immobilized onto mesoporous silica are stable, easily handled solids, with fast and complete release from the carrier material when placed into an aqueous environment. Depending on specific ion-surface interactions, they may also exhibit...

  5. Influence of Handling Practices on Material Recovery from Residential Solid Waste

    Directory of Open Access Journals (Sweden)

    Jairo F. Pereira

    2010-07-01

    Full Text Available Material recovery from municipal solid waste (MSW is becoming widely adopted in several developing countries. Residential solid waste is one of the most important components of MSW and the handling practices of the MSW by the generators have a major impact on the quality and quantity of the materials for recovery. This article analyzes the generation and composition of residential solid waste and the handling practices by users in three municipalities in Colombia that have a solid waste management plant (SWMP. The findings show that, although there are significant amounts of useful materials, their handling of the materials as “garbage”, the low recognition of recovery work, and the inadequate storage and source management practices, affect material recovery and the operation of SWMPs. These results may be taken as a reference for this type of municipality, because the solid waste management system and the type of operation of the SWMPs analyzed is similar to all of the SWMPs in the country as well as in other countries in the region.

  6. A multiscale coarse-grained polarizable solvent model for handling long tail bulk electrostatics.

    Science.gov (United States)

    Masella, Michel; Borgis, Daniel; Cuniasse, Philippe

    2013-05-15

    A multiscale coarse-grained approach able to handle efficiently the solvation of microscopic solutes in extended chemical environment is described. That approach is able to compute readily and efficiently very long-range solute/solvent electrostatic microscopic interactions, up to the 1-μm scale, by considering a reduced amount of computational resources. All the required parameters are assigned to reproduce available data concerning the solvation of single ions. Such a strategy makes it possible to reproduce with good accuracy the solvation properties concerning simple ion pairs in solution (in particular, the asymptotic behavior of the ion pair potentials of mean force). This new method represents an extension of the polarizable pseudoparticle solvent model, which has been recently improved to account for the main features of hydrophobic effects in liquid water (Masella et al., J. Comput. Chem. 2011, 32, 2664). This multiscale approach is well suited to be used for computing the impact of charge changes in free energy computations, in terms of both accuracy and efficiency.

  7. Comparison of Customer Preference for Bulk Material Handling Equipment through Fuzzy-AHP Approach

    Science.gov (United States)

    Sen, Kingshuk; Ghosh, Surojit; Sarkar, Bijan

    2017-06-01

    In the present study, customer's perception has played one of the important roles for selection of the exact equipment out of available alternatives. The present study is dealt with the method of optimization of selection criteria of a material handling equipment, based on the technical specifications considered to be available at the user end. In this work, the needs of customers have been identified and prioritized, that lead to the selection of number of criteria, which have direct effect upon the performance of the equipment. To check the consistency of selection criteria, first of all an AHP based methodology is adopted with the identified criteria and available product categories, based upon which, the judgments of the users are defined to derive the priority scales. Such judgments expressed the relative strength or intensity of the impact of the elements of the hierarchy. Subsequently, all the alternatives have ranked for each identified criteria with subsequent constitution of weighted matrices. The same has been compared with the normalized values of approximate selling prices of the equipments to determine individual cost-benefit ratio. Based on the cost-benefit ratio, the equipment is ranked. With same conditions, the study is obtained again with a Fuzzy AHP concept, where a fuzzy linguistic approach has reduced the amount of uncertainty in decision making, caused by conventional AHP due to lack of deterministic approach. The priority vectors of category and criteria are determined separately and multiplied to obtain composite score. Subsequently, the average of fuzzy weights was determined and the preferences of equipment are ranked.

  8. Comparison of Customer Preference for Bulk Material Handling Equipment through Fuzzy-AHP Approach

    Science.gov (United States)

    Sen, Kingshuk; Ghosh, Surojit; Sarkar, Bijan

    2016-06-01

    In the present study, customer's perception has played one of the important roles for selection of the exact equipment out of available alternatives. The present study is dealt with the method of optimization of selection criteria of a material handling equipment, based on the technical specifications considered to be available at the user end. In this work, the needs of customers have been identified and prioritized, that lead to the selection of number of criteria, which have direct effect upon the performance of the equipment. To check the consistency of selection criteria, first of all an AHP based methodology is adopted with the identified criteria and available product categories, based upon which, the judgments of the users are defined to derive the priority scales. Such judgments expressed the relative strength or intensity of the impact of the elements of the hierarchy. Subsequently, all the alternatives have ranked for each identified criteria with subsequent constitution of weighted matrices. The same has been compared with the normalized values of approximate selling prices of the equipments to determine individual cost-benefit ratio. Based on the cost-benefit ratio, the equipment is ranked. With same conditions, the study is obtained again with a Fuzzy AHP concept, where a fuzzy linguistic approach has reduced the amount of uncertainty in decision making, caused by conventional AHP due to lack of deterministic approach. The priority vectors of category and criteria are determined separately and multiplied to obtain composite score. Subsequently, the average of fuzzy weights was determined and the preferences of equipment are ranked.

  9. Strong surface effect on direct bulk flexoelectric response in solids

    Energy Technology Data Exchange (ETDEWEB)

    Yurkov, A. S. [Ioffe Physical-Technical Institute, 26 Politekhnicheskaya, 194021 St. Petersburg (Russian Federation); Tagantsev, A. K. [Ceramics Laboratory, Swiss Federal Institute of Technology (EPFL), CH-1015 Lausanne (Switzerland); Ioffe Physical-Technical Institute, 26 Politekhnicheskaya, 194021 St. Petersburg (Russian Federation)

    2016-01-11

    In the framework of a continuum theory, it is shown that the direct bulk flexoelectric response of a finite sample essentially depends on the surface polarization energy, even in the thermodynamic limit where the body size tends to infinity. It is found that a modification of the surface energy can lead to a change in the polarization response by a factor of two. The origin of the effect is an electric field produced by surface dipoles induced by the strain gradient. The unexpected sensitivity of the polarization response to the surface energy in the thermodynamic limit is conditioned by the fact that the moments of the surface dipoles may scale as the body size.

  10. The Role of Bulk Additions in Solid Lubricant Compacts

    Science.gov (United States)

    1987-04-01

    Solid Lubricants," Labe Ina*- Luis 7 (1967). 5. R. Do Hubbell and B. D. McConnell* "Vear Behavior of Polybonsi-idPsolt Bonded Solld-lilS Lubeioants-S J...0. Grim and Luis J. Matienso, "X-Ray Photoelectron Spectroscopy of Inorganic and Organometallic Ccpounds of Molybdenum," Inors. Cheo., 14, 1014-1018...A. Rincon and L. Arizuendi, "Extreme Pressure Lubricating Properties of Inorganic Oxidus," Wear, 60, 393-399 (1980). 211 86. American Standard for

  11. Correspondence between Experiment and Theory of Bulk Electrocrystallisation at Solid Electrodes in Aqueous Electrolyte

    DEFF Research Database (Denmark)

    Andersen, Jens Enevold Thaulov

    A theory of bulk-metal electrocrystallisation at solid-metal surfaces in aqueous electrolytes is presented. The electrochemical processes in the vicinity of the electrode surface are dynamic interactions between charged and uncharged species. Redox processes in the classical sense constitute only...

  12. METHODS FOR THE SAFE STORAGE, HANDLING, AND DISPOSAL OF PYROPHORIC LIQUIDS AND SOLIDS IN THE LABORATORY

    Energy Technology Data Exchange (ETDEWEB)

    Simmons, F.; Kuntamukkula, M.; Alnajjar, M.; Quigley, D.; Freshwater, D.; Bigger, S.

    2010-02-02

    Pyrophoric reagents represent an important class of reactants because they can participate in many different types of reactions. They are very useful in organic synthesis and in industrial applications. The Occupational Safety and Health Administration (OSHA) and the National Fire Protection Association (NFPA) define Pyrophorics as substances that will self-ignite in air at temperatures of 130 F (54.4 C) or less. However, the U.S. Department of Transportation (DOT) uses criteria different from the auto-ignition temperature criterion. The DOT defines a pyrophoric material as a liquid or solid that, even in small quantities and without an external ignition source, can ignite within five minutes after coming in contact with air when tested according to the United Nations Manual of Tests and Criteria. The Environmental Protection Agency has adopted the DOT definition. Regardless of which definition is used, oxidation of the pyrophoric reagents by oxygen or exothermic reactions with moisture in the air (resulting in the generation of a flammable gas such as hydrogen) is so rapid that ignition occurs spontaneously. Due to the inherent nature of pyrophoric substances to ignite spontaneously upon exposure to air, special precautions must be taken to ensure their safe handling and use. Pyrophoric gases (such as diborane, dichloroborane, phosphine, etc.) are typically the easiest class of pyrophoric substances to handle since the gas can be plumbed directly to the application and used remotely. Pyrophoric solids and liquids, however, require the user to physically manipulate them when transferring them from one container to another. Failure to follow proper safety precautions could result in serious injury or unintended consequences to laboratory personnel. Because of this danger, pyrophorics should be handled only by experienced personnel. Users with limited experience must be trained on how to handle pyrophoric reagents and consult with a knowledgeable staff member prior

  13. Hazardous Material Storage Facilities and Sites - WASTE_DISPOSAL_STORAGE_HANDLING_IDEM_IN: Waste Site Locations for Disposal, Storage and Handling of Solid Waste and Hazardous Waste in Indiana (Indiana Department of Environmental Management, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — WASTE_DISPOSAL_STORAGE_HANDLING_IDEM_IN is a point shapefile that contains waste site locations for the disposal, storage, and handling of solid and hazardous waste...

  14. A new highly versatile handle for chemistry on a solid support: the pipecolic linker.

    Science.gov (United States)

    Zajdel, Paweł; Nomezine, Gaël; Masurier, Nicolas; Amblard, Muriel; Pawłowski, Maciej; Martinez, Jean; Subra, Gilles

    2010-07-05

    The design, synthesis, and potential application of the pipecolic linker is presented. This new versatile handle can immobilize primary, secondary, and aromatic amines, as well as alcohols, phenols, and hydrazides, on a solid support. Compared with other linkers, the anchoring step is easy and efficient. The release of final products from the resin proceeds upon acidic treatment with high purities. The pipecolic linker offers the promise of being using in peptide chemistry to produce peptides modified at the N and C terminus, peptidomimetics, as well as small organic molecules.

  15. A Teflon microreactor with integrated piezoelectric actuator to handle solid forming reactions.

    Science.gov (United States)

    Kuhn, Simon; Noël, Timothy; Gu, Lei; Heider, Patrick L; Jensen, Klavs F

    2011-08-07

    We present a general inexpensive method for realizing a Teflon stack microreactor with an integrated piezoelectric actuator for conducting chemical synthesis with solid products. The microreactors are demonstrated with palladium-catalyzed C-N cross-coupling reactions, which are prone to clogging microchannels by forming insoluble salts as by-products. Investigations of the ultrasonic waveform applied by the piezoelectric actuator reveal an optimal value of 50 kHz at a load power of 30 W. Operating the system at these conditions, the newly developed Teflon microreactor handles the insoluble solids formed and no clogging is observed. The investigated reactions reach full conversion in very short reaction times and high isolated yields are obtained (>95% yield).

  16. Direct determination of bulk etching rate for LR-115-II solid state nuclear track detectors

    Indian Academy of Sciences (India)

    T A Salama; U Seddik; T M Heggazy; A Ahmed Morsy

    2006-09-01

    The thickness of the removed layer of the LR-115-II solid state nuclear track detector during etching is measured directly with a rather precise instrument. Dependence of bulk etching rate on temperature of the etching solution is investigated. It has been found that the bulk etching rate is 3.2 m/h at 60°C in 2.5 N NaOH of water solution. It is also found that the track density in detectors exposed to soil samples increases linearly with the removed layer.

  17. Experiment and mechanism of vibration liquefaction and compacting of saturated bulk solid

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The paper studies the probability of industrial application of vibration liquefaction of bulk solid from the opposite point of view, and proposing turning its harmful effects into benefits. Utilizing a new device of vibration liquefaction and by compacting saturated bulk solid, a set of additional device for experiment was designed. These experiments examined the problems related to vibration liquefaction of fine-ores and tailings on the basis of DSA-1 type direct shear apparatus, including models of straight tubes, curved tubes and a sandbox. The changing properties of tailings under vibration and the mechanism of vibration liquefaction and compacting of tailings were studied, and future application of the technique to mines has been put forward.

  18. Taking out the Trash (And the Recyclables: RFID and the Handling of Municipal Solid Waste

    Directory of Open Access Journals (Sweden)

    David C. Wyld

    2010-01-01

    Full Text Available This article examines how RFID (radio frequency identification is poised to help transform the way wehandle our trash - our MSW (Municipal Solid Waste. We provide an overview showing that trash trendsin the United States are not good, as modern life has meant increasing volumes of trash that can bedisposed of in fewer and fewer landfills. We examine how RFID can be employed in the MSW area toboth facilitate the growth of PAYT (Pay as You Throw use-based billing for waste management servicesand to promote incentive-based recycling programs, both of which aim to reduce the amount of trashentering our landfills. We discuss the prospects for the future as RFID is introduced into what is now a$52 billion market for waste handling.

  19. [Recycle of contaminated scrap metal]: Task 1.3.2, Bulk solids feed system. Topical report, October 1993-- January 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    A critical requirement in DOE`s efforts to recycle, reuse, and dispose of materials from its decontamination and decommissioning activities is the design of a robust system to process a wide variety of bulk solid feeds. The capability to process bulk solids will increase the range of materials and broaden the application of Catalytic Extraction Processing (CEP). The term bulk solids refers to materials that are more economically fed into the top of a molten metal bath than by submerged injection through a tuyere. Molten Metal Technology, Inc. (MMT) has characterized CEP`s ability to process bulk solid feed materials and has achieved significant growth in the size of bulk solid particles compatible with Catalytic Extraction Processing. Parametric experimental studies using various feed materials representative of the components of various DOE waste streams have validated design models which establish the reactor operating range as a function of feed material, mass flow rate, and particle size. MMT is investigating the use of a slurry system for bulk solid addition as it is the most efficient means for injecting soils, sludges, and similar physical forms into a catalytic processing unit. MMT is continuing to evaluate condensed phase product removal systems and alternative energy addition sources to enhance the operating efficiency of bulk solids CEP units. A condensed phase product removal system capable of on-demand product removal has been successfully demonstrated. MMT is also investigating the use of a plasma arc torch to provide supplemental heating during bulk solids processing. This comprehensive approach to bulk solids processing is expected to further improve overall process efficiency prior to the deployment of CEP for the recycle, reuse, and disposal of materials from DOE decontamination and decommissioning Activities.

  20. Effects of bulk and interfacial anharmonicity on thermal conductance at solid/solid interfaces

    Science.gov (United States)

    Le, Nam Q.; Polanco, Carlos A.; Rastgarkafshgarkolaei, Rouzbeh; Zhang, Jingjie; Ghosh, Avik W.; Norris, Pamela M.

    2017-06-01

    We present the results of classical molecular dynamics simulations to assess the relative contributions to interfacial thermal conductance from inelastic phonon processes at the interface and in the adjacent bulk materials. The simulated system is the prototypical interface between argon and "heavy argon" crystals, which enables comparison with many past computational studies. We run simulations interchanging the Lennard-Jones potential with its harmonic approximation to test the effect of anharmonicity on conductance. The results confirm that the presence of anharmonicity is correlated with increasing thermal conductance with temperature, which supports conclusions from prior experimental and theoretical work. However, in the model Ar/heavy-Ar system, anharmonic effects at the interface itself contribute a surprisingly small part of the total thermal conductance. The larger fraction of the thermal conductance at high temperatures arises from anharmonic effects away from the interface. These observations are supported by comparisons of the spectral energy density, which suggest that bulk anharmonic processes increase the interfacial conductance by thermalizing energy from modes with low transmission to modes with high transmission.

  1. THE RELATIONSHIP OF TOTAL DISSOLVED SOLIDS MEASUREMENTS TO BULK ELECTRICAL CONDUCTIVITY IN AN AQUIFER CONTAMINATED WITH HYDROCARBON

    Science.gov (United States)

    A recent conceptual model links high bulk electrical conductivities at hydrocarbon impacted sites to higher total dissolved solids (TDS) resulting from enhanced mineral weathering due to acids produced during biodegradation. In this study, we investigated the vertical distributio...

  2. Solid Waste Treatment Technology

    Science.gov (United States)

    Hershaft, Alex

    1972-01-01

    Advances in research and commercial solid waste handling are offering many more processing choices. This survey discusses techniques of storage and removal, fragmentation and sorting, bulk reduction, conversion, reclamation, mining and mineral processing, and disposal. (BL)

  3. Surface and bulk crystallization of amorphous solid water films: Confirmation of "top-down" crystallization

    Science.gov (United States)

    Yuan, Chunqing; Smith, R. Scott; Kay, Bruce D.

    2016-10-01

    The crystallization kinetics of nanoscale amorphous solid water (ASW) films are investigated using temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS). TPD measurements are used to probe surface crystallization and RAIRS measurements are used to probe bulk crystallization. Isothermal TPD results show that surface crystallization is independent of the film thickness (from 100 to 1000 ML). Conversely, the RAIRS measurements show that the bulk crystallization time increases linearly with increasing film thickness. These results suggest that nucleation and crystallization begin at the ASW/vacuum interface and then the crystallization growth front propagates linearly into the bulk. This mechanism was confirmed by selective placement of an isotopic layer (5% D2O in H2O) at various positions in an ASW (H2O) film. In this case, the closer the isotopic layer was to the vacuum interface, the earlier the isotopic layer crystallized. These experiments provide direct evidence to confirm that ASW crystallization in vacuum proceeds by a "top-down" crystallization mechanism.

  4. Surface and bulk crystallization of amorphous solid water films: Confirmation of “top-down” crystallization

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Chunqing; Smith, R. Scott; Kay, Bruce D.

    2016-10-01

    The crystallization kinetics of nanoscale amorphous solid water (ASW) films are investigated using temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS). TPD measurements are used to probe surface crystallization and RAIRS measurements are used to probe bulk crystallization. Isothermal TPD results show that surface crystallization is independent of the film thickness (from 100 to 1000 ML). Conversely, the RAIRS measurements show that the bulk crystallization time increases linearly with increasing film thickness. These results suggest that nucleation and crystallization begin at the ASW/vacuum interface and then the crystallization growth front propagates linearly into the bulk. This mechanism was confirmed by selective placement of an isotopic layer (5% D2O in H2O) at various positions in an ASW (H2O) film. In this case, the closer the isotopic layer was to the vacuum interface, the earlier the isotopic layer crystallized. These experiments provide direct evidence to confirm that ASW crystallization in vacuum proceeds by a “top-down” crystallization mechanism.

  5. Uniform-Format Solid Feedstock Supply System: A Commodity-Scale Design to Produce an Infrastructure-Compatible Bulk Solid from Lignocellulosic Biomass -- Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    J. Richard Hess; Christopher T. Wright; Kevin L. Kenney; Erin M. Searcy

    2009-04-01

    This report, Uniform-Format Solid Feedstock Supply System: A Commodity-Scale Design to Produce an Infrastructure-Compatible Bulk Solid from Lignocellulosic Biomass, prepared by Idaho National Laboratory (INL), acknowledges the need and provides supportive designs for an evolutionary progression from present day conventional bale-based supply systems to a uniform-format, bulk solid supply system that transitions incrementally as the industry launches and matures. These designs couple to and build from current state of technology and address science and engineering constraints that have been identified by rigorous sensitivity analyses as having the greatest impact on feedstock supply system efficiencies and costs.

  6. Uniform-Format Solid Feedstock Supply System: A Commodity-Scale Design to Produce an Infrastructure-Compatible Bulk Solid from Lignocellulosic Biomass -- Executive Summary

    Energy Technology Data Exchange (ETDEWEB)

    J. Richard Hess; Christopher T. Wright; Kevin L. Kenney; Erin M. Searcy

    2009-04-01

    This report, Uniform-Format Solid Feedstock Supply System: A Commodity-Scale Design to Produce an Infrastructure-Compatible Bulk Solid from Lignocellulosic Biomass, prepared by Idaho National Laboratory (INL), acknowledges the need and provides supportive designs for an evolutionary progression from present day conventional bale-based supply systems to a uniform-format, bulk solid supply system that transitions incrementally as the industry launches and matures. These designs couple to and build from current state of technology and address science and engineering constraints that have been identified by rigorous sensitivity analyses as having the greatest impact on feedstock supply system efficiencies and costs.

  7. Accelerated Metastable Solid-liquid Interdiffusion Bonding with High Thermal Stability and Power Handling

    Science.gov (United States)

    Huang, Ting-Chia; Smet, Vanessa; Kawamoto, Satomi; Pulugurtha, Markondeya R.; Tummala, Rao R.

    2017-09-01

    Emerging high-performance systems are driving the need for advanced packaging solutions such as 3-D integrated circuits (ICs) and 2.5-D system integration with increasing performance and reliability requirements for off-chip interconnections. Solid-liquid interdiffusion (SLID) bonding resulting in all-intermetallic joints has been proposed to extend the applicability of solders, but faces fundamental and manufacturing challenges hindering its wide adoption. This paper introduces a Cu-Sn SLID interconnection technology, aiming at stabilization of the microstructure in the Cu6Sn5 metastable phase rather than the usual stable Cu3Sn phase. This enables formation of a void-free interface yielding higher mechanical strength than standard SLID bonding, as well as significantly reducing the transition time. The metastable SLID technology retains the benefits of standard SLID with superior I/O pitch scalability, thermal stability and current handling capability, while advancing assembly manufacturability. In the proposed concept, the interfacial reaction is controlled by introducing Ni(P) diffusion barrier layers, designed to effectively isolate the metastable Cu6Sn5 phase preventing any further transformation. Theoretical diffusion and kinetic models were applied to design the Ni-Cu-Sn interconnection stack to achieve the targeted joint composition. A daisy chain test vehicle was used to demonstrate this technology as a first proof of concept. Full transition to Cu6Sn5 was successfully achieved within a minute at 260°C as confirmed by scanning electron microscope (SEM) and x-ray energy dispersive spectroscopy (XEDS) analysis. The joint composition was stable through 10× reflow, with outstanding bond strength averaging 90 MPa. The metastable SLID interconnections also showed excellent electromigration performance, surviving 500 h of current stressing at 105 A/cm2 at 150°C.

  8. Effect of initial bulk density on high-solids anaerobic digestion of MSW: General mechanism.

    Science.gov (United States)

    Caicedo, Luis M; Wang, Hongtao; Lu, Wenjing; De Clercq, Djavan; Liu, Yanjun; Xu, Sai; Ni, Zhe

    2017-06-01

    Initial bulk density (IBD) is an important variable in anaerobic digestion since it defines and optimizes the treatment capacity of a system. This study reveals the mechanism on how IBD might affect anaerobic digestion of waste. Four different IBD values: D1 (500-700kgm(-3)), D2 (900-1000kgm(-3)), D3 (1100-1200kgm(-3)) and D4 (1200-1400kgm(-3)) were set and tested over a period of 90days in simulated landfill reactors. The main variables affected by the IBD are the methane generation, saturation degree, extraction of organic matter, and the total population of methanogens. The study identified that IBD >1000kgm(-3) may have significant effect on methane generation, either prolonging the lag time or completely inhibiting the process. This study provides a new understanding of the anaerobic digestion process in saturated high-solids systems. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Thermoelectric properties of bulk MoSi2 synthesized by solid state microwave heating

    Science.gov (United States)

    Lan, Yu; Xie, Mianyu; Ouyang, Ting; Yue, Song

    2016-07-01

    In this research, single phase α-MoSi2 was prepared by solid state hybrid microwave heating within 90 min at relatively low temperature 1273 K. Such precursor powders were then ball milled and sintered by microwave heating at different temperatures. The thermoelectric (TE) properties of MoSi2 bulks were investigated in the temperature range of 300-673 K. When the sintering temperature increases from 973 K to 1273 K, the electrical resistivity decreases significantly and the Seebeck coefficients increase obviously, leading to the maximum TE powder factor of 6.2 × 10-6Wm-1K-2 at 673 K. These results demonstrate the feasibility of high efficient and economical synthesis of MoSi2 by microwave heating technique, with the final products having comparable TE performance in comparison to those from typical methods with long duration and energy-extensive consumption.

  10. Investigation of preparation methods on surface/bulk structural relaxation and glass fragility of amorphous solid dispersions.

    Science.gov (United States)

    Ke, Peng; Hasegawa, Susumu; Al-Obaidi, Hisham; Buckton, Graham

    2012-01-17

    The objective of this study was to investigate the effect of preparation methods on the surface/bulk molecular mobility and glass fragility of solid dispersions. Solid dispersions containing indomethacin and PVP K30 were chosen as the model system. An inverse gas chromatography method was used to determine the surface structural relaxation of the solid dispersions and these data were compared to those for bulk relaxation obtained by DSC. The values of τ(β) for the surface relaxation were 4.6, 7.1 and 1.8h for melt quenched, ball milled and spray dried solid dispersions respectively, compared to 15.6, 7.9 and 9.8h of the bulk. In all systems, the surface had higher molecular mobility than the bulk. The glass fragility of the solid dispersions was also influenced by the preparation methods with the most fragile system showing the best stability. The zero mobility temperature (T(0)) was used to correlate with the physical stability of the solid dispersions. Despite having similar T(g) (65°C), the T(0) of the melt quenched, ball milled and spray dried samples were 21.6, -4.2 and 16.7°C respectively which correlated well with their physical stability results. Therefore, T(0) appears to be a better indicator than T(g) for predicting stability of amorphous materials.

  11. Molecular simulation of fluid mixtures in bulk and at solid-liquid interfaces

    Science.gov (United States)

    Kern, Jesse L.

    The properties of a diverse range of mixture systems at interfaces are investigated using a variety of computational techniques. Molecular simulation is used to examine the thermodynamic, structural, and transport properties of heterogeneous systems of theoretical and practical importance. The study of binary hard-sphere mixtures at a hard wall demonstrates the high accuracy of recently developed classical-density functionals. The study of aluminum--gallium solid--liquid heterogeneous interfaces predicts a significant amount of prefreezing of the liquid by adopting the structure of the solid surface. The study of ethylene-expanded methanol within model silica mesopores shows the effect of confinement and surface functionalzation on the mixture composition and transport inside of the pores. From our molecular-dynamics study of binary hard-sphere fluid mixtures at a hard wall, we obtained high-precision calculations of the wall-fluid interfacial free energies, gamma. We have considered mixtures of varying diameter ratio, alpha = 0.7,0.8,0.9; mole fraction, x 1 = 0.25,0.50,0.75; and packing fraction, eta compressive stress on the Ga atoms. Bulk methanol--ethylene mixtures under vapor-liquid equilibrium conditions have been characterized using Monte Carlo and molecular dynamics. The simulated vapor-liquid coexistence curves for the pure-component and binary mixtures agree well with experiment, as do the mixture volumetric expansion results. Using chemical potentials obtained from the bulk simulations, the filling of a number of model silica mesopores with ethylene and methanol is simulated. We report the compositions of the confined fluid mixtures over a range of pressures and for three degrees of nominal pore hydrophobicity.

  12. A study of influence of gravity on bulk behavior of particulate solid

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    This paper examines the influence of gravity on the bulk responses of a granular solid. The loading scenarios in this study include confined compression, rod penetration into a granular medium and discharging through an orifice. Similar loading and flow conditions are likely to be encountered in the stress and deformation regimes that regoliths are subjected to in extraterrestrial exploration activities including in situ resource utilisation processes. Both spherical and non-spherical particles were studied using the discrete element method (DEM). Whilst DEM is increasingly used to model granular solids, careful validations of the simulation outcomes are rather rare. Thus in addition to exploring the effect of gravity, this paper also compares DEM simulations with experiments under terrestrial condition to verify whether DEM can produce satisfactory predictions.The terrestrial experiments were conducted with great care and simulated closely using DEM. The key mechanical and geometrical properties for the particles were measured in laboratory tests for use in the DEM simulations. A series of DEM computations were then performed under reduced gravity to simulate these experiments under extraterrestrial environment. It was found that gravity has no noticeable effect on the force transmission in the confined compression case; the loading gradient in the rod penetration is linearly proportional to the gravity; the mass flow rate in silo discharge is proportional to square root of the gravity and the angle of repose increases with reducing gravity. These findings are in agreement with expectation and existing scientific evidence.

  13. Prediction and improvement of the solid particles transfer rate for the bulk handing system design of offshore drilling vessels

    Directory of Open Access Journals (Sweden)

    Mincheol Ryu

    2015-11-01

    Full Text Available Numerous experiments with a scaled pilot facility were carried out to compare the relative bulk transfer performance of three special devices for applications to drilling systems. The pipe diameter for bulk transportation was 3 in., which corresponds to around half of the actual system dimensions. Two different pressures, 3 and 4 bar, were considered to check the relative performance under different pressure conditions at a bulk storage tank. And to make a practical estimation method of the bulk transfer rate at the early design stages of the bulk handling system, a series of experiments were conducted for real scaled bulk handing systems of two drilling vessels. The pressure drops at each pipe element as well as the bulk transfer rates were measured under different operating conditions. Using the measured results, the friction factor for each pipe element was calculated and a procedure for transfer rate estimation was developed. Compared to the measured transfer rate results for other drilling vessels, the estimated transfer rates were within a maximum 15% error bound.

  14. Solid, shape recovered 'Bulk' nitinol: Part II-Mechanical properties

    Energy Technology Data Exchange (ETDEWEB)

    Saigal, Anil, E-mail: anil.saigal@tufts.edu [Department of Mechanical Engineering, Tufts University, Medford, MA 02155 (United States); Fonte, Matthew [Department of Mechanical Engineering, Tufts University, Medford, MA 02155 (United States)

    2011-06-25

    Highlights: {yields} Evaluate use of solid bulk Nitinol as a potential material for hip replacements. {yields} At 400 MPa, Nitinol has an endurance limit greater than 10 million cycles. {yields} Below 445 MPa [1 1 1] textured specimens last longer than [1 1 0] textured specimens. {yields} Above 445 MPa, it switches and both fail relatively quickly around 400,000 cycles. {yields} Impact toughness - Charpy: 4 ft-lbs {+-} 3%, CT: 20-31 MPa{radical}m. - Abstract: The use of Nitinol for medical purposes was first reported in the late 1960s. Today Nitinol is commonly used for the manufacture of stents, which are primarily used in peripheral and coronary bypass graft interventions. The application of NiTi in orthopedics is an exciting prospect but one that has yet to be realized. Nitinol's unique mechanical behavior is derived from the coordinated atomic movements manifesting in phase transformations from cubic austenite to monoclinic martensite. These phase transformations are solid-to-solid phase transformations that occur without diffusion or plasticity, potentially making them reversible. They involve changes in the crystalline structure that can be induced by changes in either temperature or stress. In addition to phase transformations, Nitinol's mechanical strength is strongly dependent on the alloy composition and the method in which the material is processed, i.e. rolled, drawn, extruded, or forged. The mechanical work, combined with the intermediate heat treatment steps, contribute to modify microstructure, transformation temperatures and mechanical properties. These manufacturing processing steps lead to texturing (crystallographic alignment) of the material. Alignment of the atomic planes from texture in the polycrystalline material have a marked influence on the mechanical properties by either limiting or promoting phase transformations and shape recovery strains. This paper focuses on the fatigue and fracture properties of Nitinol.

  15. A New Approach for Solid Waste Handling in Mosul City, Comparison Study with the Existing System

    Directory of Open Access Journals (Sweden)

    Amar T. Hamad

    2013-05-01

    Full Text Available  Municipal Solid waste management constitutes a serious problem in many developing countries. Cities spend increasing resources  to improve their Municipal solid waste management. Based on the concept that solid waste is a resource containing significant amounts of valuable materials, new approaches of solid waste management are adopted. The present work proposes a policy framework for improving a low-cost waste management system in Mosul city. The new approach induces additional services to the existing solid waste system to reduce the unit cost per ton of solid waste generated. The proposed system includes sorting, recycling and composting units.      This paper presents an application of a new computerized decision package for an integrated solid waste management within Mosul city. New software called "COSEPRE" is used to analyze the service cost for both existing and proposed solid waste management system. The input data is collected from different related directorates in Mosul city. Data that are difficult to be obtained are prepared by laboratory analysis or field investigations. The results revealed a 58% reduction in unit cost by employing the new system of solid waste management.

  16. Testing a simple method for computing directly the bulk modulus by NPT simulation: The case of polydisperse hard sphere solids

    Science.gov (United States)

    Li, Da; Xu, Hong

    2015-10-01

    The bulk modulus of hard sphere solids has been computed directly by constant pressure Monte-Carlo simulations, using the histogram of the volume fluctuations. In considering first the one-component system, we show that the method is accurate in a large range of pressures, including high-pressure regime. The method is then applied to a polydisperse solid with relatively low polydispersity index. For illustrative purpose, we took a three-component mixture with symmetric size-distribution, and we studied the solid phase (fcc crystal) of this system. Our results show that the equation of state is very sensitive to the polydispersity. Furthermore, in the high-pressure region, where no (accurate) analytical fit for the equation of state exists, our simulations are able to predict the bulk modulus of such systems.

  17. Best Available Techniques (BAT) in solid biomass fuel processing, handling, storage and production of pellets from biomass

    Energy Technology Data Exchange (ETDEWEB)

    Lindberg, J.P.; Tana, J. [AaF-Industri Ab, Stockholm (Sweden)

    2012-09-15

    With the increasing use of biomass fuels the varieties of sources for biomass have expanded to almost all possible combustible matter with biological origin. The increasing scale in solid biomass fuel production and utilization at the combustion plants of the wide variety of biomass fuels have contributed to littering, dust, odor and noise emissions of the production chain. The report aims to provide information for operators, environmental consultants and competent environmental authorities on what is considered BAT, as defined in the IPPC directive (2008/1/EC), in biomass processing and handling as well as the production of pellets from biomass. The project gives a brief description of commonly used solid biomass fuels and the processes, handling and storage of these biomasses in the Nordic countries covering processes from production site to the point of use. Environmental emissions, sources of waste and other relevant environmental aspects from commonly used processes, included raw material and energy use, chemical use and emissions to soil are also included in the report. (Author)

  18. Automated, Ultra-Sterile Solid Sample Handling and Analysis on a Chip

    Science.gov (United States)

    Mora, Maria F.; Stockton, Amanda M.; Willis, Peter A.

    2013-01-01

    There are no existing ultra-sterile lab-on-a-chip systems that can accept solid samples and perform complete chemical analyses without human intervention. The proposed solution is to demonstrate completely automated lab-on-a-chip manipulation of powdered solid samples, followed by on-chip liquid extraction and chemical analysis. This technology utilizes a newly invented glass micro-device for solid manipulation, which mates with existing lab-on-a-chip instrumentation. Devices are fabricated in a Class 10 cleanroom at the JPL MicroDevices Lab, and are plasma-cleaned before and after assembly. Solid samples enter the device through a drilled hole in the top. Existing micro-pumping technology is used to transfer milligrams of powdered sample into an extraction chamber where it is mixed with liquids to extract organic material. Subsequent chemical analysis is performed using portable microchip capillary electrophoresis systems (CE). These instruments have been used for ultra-highly sensitive (parts-per-trillion, pptr) analysis of organic compounds including amines, amino acids, aldehydes, ketones, carboxylic acids, and thiols. Fully autonomous amino acid analyses in liquids were demonstrated; however, to date there have been no reports of completely automated analysis of solid samples on chip. This approach utilizes an existing portable instrument that houses optics, high-voltage power supplies, and solenoids for fully autonomous microfluidic sample processing and CE analysis with laser-induced fluorescence (LIF) detection. Furthermore, the entire system can be sterilized and placed in a cleanroom environment for analyzing samples returned from extraterrestrial targets, if desired. This is an entirely new capability never demonstrated before. The ability to manipulate solid samples, coupled with lab-on-a-chip analysis technology, will enable ultraclean and ultrasensitive end-to-end analysis of samples that is orders of magnitude more sensitive than the ppb goal given

  19. Infectious risk assessment of unsafe handling practices and management of clinical solid waste.

    Science.gov (United States)

    Hossain, Md Sohrab; Rahman, Nik Norulaini Nik Ab; Balakrishnan, Venugopal; Puvanesuaran, Vignesh R; Sarker, Md Zaidul Islam; Kadir, Mohd Omar Ab

    2013-01-31

    The present study was undertaken to determine the bacterial agents present in various clinical solid wastes, general waste and clinical sharp waste. The waste was collected from different wards/units in a healthcare facility in Penang Island, Malaysia. The presence of bacterial agents in clinical and general waste was determined using the conventional bacteria identification methods. Several pathogenic bacteria including opportunistic bacterial agent such as Pseudomonas aeruginosa, Salmonella spp., Klebsiella pneumoniae, Serratia marcescens, Acinetobacter baumannii, Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, Streptococcus pyogenes were detected in clinical solid wastes. The presence of specific pathogenic bacterial strains in clinical sharp waste was determined using 16s rDNA analysis. In this study, several nosocomial pathogenic bacteria strains of Escherichia coli, Klebsiella pneumoniae, Proteus mirabilis, Lysinibacillus sphaericus, Serratia marcescens, and Staphylococcus aureus were detected in clinical sharp waste. The present study suggests that waste generated from healthcare facilities should be sterilized at the point of generation in order to eliminate nosocomial infections from the general waste or either of the clinical wastes.

  20. Infectious Risk Assessment of Unsafe Handling Practices and Management of Clinical Solid Waste

    Directory of Open Access Journals (Sweden)

    Md. Zaidul Islam Sarker

    2013-01-01

    Full Text Available The present study was undertaken to determine the bacterial agents present in various clinical solid wastes, general waste and clinical sharp waste. The waste was collected from different wards/units in a healthcare facility in Penang Island, Malaysia. The presence of bacterial agents in clinical and general waste was determined using the conventional bacteria identification methods. Several pathogenic bacteria including opportunistic bacterial agent such as Pseudomonas aeruginosa, Salmonella spp., Klebsiella pneumoniae, Serratia marcescens, Acinetobacter baumannii, Staphylococcus aureus, Staphylococcus epidermidis, Enterococcus faecalis, Streptococcus pyogenes were detected in clinical solid wastes. The presence of specific pathogenic bacterial strains in clinical sharp waste was determined using 16s rDNA analysis. In this study, several nosocomial pathogenic bacteria strains of Escherichia coli, Klebsiella pneumoniae, Proteus mirabilis, Lysinibacillus sphaericus, Serratia marcescens, and Staphylococcus aureus were detected in clinical sharp waste. The present study suggests that waste generated from healthcare facilities should be sterilized at the point of generation in order to eliminate nosocomial infections from the general waste or either of the clinical wastes.

  1. EUDAT strategies for handling dynamic data in the solid Earth Sciences

    Science.gov (United States)

    Michelini, Alberto; Evans, Peter; Kemps-Snijder, Mark; Heikkinen, Jani; Buck, Justin; Misutka, Jozef; Drude, Sebastian; Fares, Massimo; Cacciari, Claudio; Fiameni, Giuseppe

    2014-05-01

    Some dynamic data is generated by sensors which produce data streams that may be temporarily incomplete (owing to latencies or temporary interruptions of the transmission lines between the field sensors and the data acquisition centres) and that may consequently fill up over time (automatically or after manual intervention). Dynamic data can also be generated by massive crowd sourcing where, for example, experimental collections of data can be filled up at random moments. The nature of dynamic data makes it difficult to handle for various reasons: a) establishing valid policies that guide early replication for data preservation and access optimization is not trivial, b) identifying versions of such data - thus making it possible to check their integrity - and referencing the versions is also a challenging task, and c) performance issues are extremely important since all these activities must be performed fast enough to keep up with the incoming data stream. There is no doubt that both applications areas (namely data from sensors and crowdsourcing) are growing in their relevance for science, and that appropriate infrastructure support (by initiatives such as EUDAT) is vital to handle these challenges. In addition, data must be citeable to encourage transparent, reproducible science, and to provide clear metrics for assessing the impact of research, which also drives funding choices. Data stream in real time often undergo changes/revisions while they are still growing, as new data arrives, and they are revised as missing data is recovered, or as new calibration values are applied. We call these "dynamic" data sets, DDS. A common form of DDS is time series data in which measurements are obtained on a regular schedule, with a well-defined sample rate. Examples include the hourly temperature in Barcelona, and the displacement (a 3-D vector quantity) of a seismograph from its rest position, which may record at a rate of 100 or more samples per second. These form streams

  2. Emergy Evaluation of the Urban Solid Waste Handling in Liaoning Province, China

    Directory of Open Access Journals (Sweden)

    Lixiao Zhang

    2013-10-01

    Full Text Available Waste management is a distinct practice aimed at reducing its effects on health and the environment and increasing energy and material recovery. The urban waste management industry has been slow to adopt new technologies, such as sanitary landfills and incineration, which enable better treatment results. The aim of a thorough ecological-economic evaluation of different treatment technologies is to extract the maximum practical benefits from investments and to ensure the minimum environmental impacts of wastes. This paper compares four garbage treatment systems, including sanitary landfills systems, fluidized bed incineration system, grate type incineration system and the current landfills system in Liaoning Province, China. By considering the economic and environmental impacts of waste treatment and disposal, impact of emissions, and contribution of wastes input, this paper constructed an emergy-based urban solid waste model for evaluating the sustainability of the holistic systems. The results in Liaoning indicate that the human health losses caused by the harmful air emissions are ranked in this order: fluidized bed incineration > grate type incineration > current landfills > sanitary landfills, while the ecosystem losses are ranked: grate type incineration > fluidized bed incineration > sanitary landfills > current landfills. The electricity yield ratios are ranked: grate type incineration > fluidized bed incineration > sanitary landfills > current landfills. Taken together this suggests that in considering the incineration option, decision makers must weigh the benefits of incineration against the significant operating costs, potential environmental impacts, and technical difficulties of operating. Emergy analysis of the urban solid treatment systems can provide a set of useful tools which can be used to compare the comprehensive performances of different waste treatment processes for decision-making and optimizing the whole process.

  3. Bulk and surface acoustic waves in solid-fluid Fibonacci layered materials.

    Science.gov (United States)

    Quotane, I; El Boudouti, E H; Djafari-Rouhani, B; El Hassouani, Y; Velasco, V R

    2015-08-01

    We study theoretically the propagation and localization of acoustic waves in quasi-periodic structures made of solid and fluid layers arranged according to a Fibonacci sequence. We consider two types of structures: either a given Fibonacci sequence or a periodic repetition of a given sequence called Fibonacci superlattice. Various properties of these systems such as: the scaling law and the self-similarity of the transmission spectra or the power law behavior of the measure of the energy spectrum have been highlighted for waves of sagittal polarization in normal and oblique incidence. In addition to the allowed modes which propagate along the system, we study surface modes induced by the surface of the Fibonacci superlattice. In comparison with solid-solid layered structures, the solid-fluid systems exhibit transmission zeros which can break the self-similarity behavior in the transmission spectra for a given sequence or induce additional gaps other than Bragg gaps in a periodic structure.

  4. Development of a Bulk-Format System to Harvest, Handle, Store, and Deliver High-Tonnage Low-Moisture Switchgrass Feedstock

    Energy Technology Data Exchange (ETDEWEB)

    Womac, Alvin [Genera Energy LLC, Vonore, TN (United States); Groothuis, Mitch [Genera Energy LLC, Vonore, TN (United States); Westover, Tyler [Genera Energy LLC, Vonore, TN (United States); Phanphanich, Manunya [Genera Energy LLC, Vonore, TN (United States); Webb, Erin [Genera Energy LLC, Vonore, TN (United States); Sokhansanj, Shahab [Genera Energy LLC, Vonore, TN (United States); Turhollow, Anthony [Genera Energy LLC, Vonore, TN (United States)

    2013-09-24

    This project evaluates and compares comprehensive feedstock logistics systems (FLS), where a FLS is defined to comprehensively span from biomass material standing in a field to conveyance of a uniform, industrial-milled product into the throat of a biomass conversion facility (BCF). Elements of the bulk-format FLS evaluated in this project include: field-standing switchgrass dry chopped into bulk format on the farm, hauled (either loose or bulk compacted) to storage, stored with confining overburden in a protective facility, reclaimed and conveyed to bulk-format discharge, bulk compacted into an ejector trailer, and conveyed as bulk flow into the BCF. In this FLS evaluation, bulk storage bins served as a controlled and sensored proxy for large commercial stacks protected from moisture with a membrane cover.

  5. Thermally activated reaction–diffusion-controlled chemical bulk reactions of gases and solids

    Directory of Open Access Journals (Sweden)

    S. Möller

    2015-01-01

    Full Text Available The chemical kinetics of the reaction of thin films with reactive gases is investigated. The removal of thin films using thermally activated solid–gas to gas reactions is a method to in-situ control deposition inventory in vacuum and plasma vessels. Significant scatter of experimental deposit removal rates at apparently similar conditions was observed in the past, highlighting the need for understanding the underlying processes. A model based on the presence of reactive gas in the films bulk and chemical kinetics is presented. The model describes the diffusion of reactive gas into the film and its chemical interaction with film constituents in the bulk using a stationary reaction–diffusion equation. This yields the reactive gas concentration and reaction rates. Diffusion and reaction rate limitations are depicted in parameter studies. Comparison with literature data on tokamak co-deposit removal results in good agreement of removal rates as a function of pressure, film thickness and temperature.

  6. The ortho backbone amide linker (o-BAL) is an easily prepared and highly acid-labile handle for solid-phase synthesis

    DEFF Research Database (Denmark)

    Boas, Ulrik; Brask, Jesper; Christensen, J.B.;

    2002-01-01

    The tris(alkoxy)benzyl backbone amide linker (BAL) has found widespread application in solid-phase synthesis. The key intermediate for preparation of para BAL (p-BAL) is 2,6-dimethoxy-4-hydroxybenzaldehyde; several reports on its synthesis have appeared. However, the ortho analogue of the handle (o...

  7. Anaerobic treatment of wastewater with high suspended solids from a bulk drug industry using fixed film reactor (AFFR).

    Science.gov (United States)

    Gangagni Rao, A; Venkata Naidu, G; Krishna Prasad, K; Chandrasekhar Rao, N; Venkata Mohan, S; Jetty, Annapurna; Sarma, P N

    2005-01-01

    Studies were carried out on the treatment of wastewater from a bulk drug industry using an anaerobic fixed film reactor (AFFR) designed and fabricated in the laboratory. The chemical oxygen demand (COD) and total dissolved solids (TDS) of the wastewater were found to be very high with low biochemical oxygen demand (BOD) to COD ratio and high total suspended solid (TSS) concentration. Acclimatization of seed consortia and startup of the reactor was carried out by directly using the wastewater, which resulted in reducing the period of startup to 30 days. The reactor was studied at different organic loading rates (OLR) and it was found that the optimum OLR was 10 kg COD/m(3)/day. The wastewater under investigation, which had a considerable quantity of SS, was treated anaerobically without any pretreatment. COD and BOD of the reactor outlet wastewater were monitored and at steady state and optimum OLR 60-70% of COD and 80-90% of BOD were removed. The reactor was subjected to organic shock loads at two different OLR and the reaction could withstand the shocks and performance could be restored to normalcy at that OLR. The results obtained indicated that AFFR could be used efficiently for the treatment of wastewater from a bulk drug industry having high COD, TDS and TSS.

  8. Determination of te spontaneous ignition temperature of bulk materials. Simple to handle possibility for the practice; Bestimmung der Selbstentzuendungstemperatur von Schuettguetern. Einfach handhabbarer Weg fuer die Praxis

    Energy Technology Data Exchange (ETDEWEB)

    Kimpel, Sebastian; Horn, Joerg; Franke, Juergen [consilab Gesellschaft fuer Anlagensicherheit mbH, Frankfurt am Main (Germany)

    2012-06-15

    Bulk materials are widely used in industry. Bulk materials come up not only in mining (coal), in agriculture (flour) and food industry (coffee), but also in the pharmaceutical industry for example in the production of specialty chemicals and pigments. Mass-produced goods in tonnages are produced, processed, transported and stored. Due to the poor heat transfer in the bulks the relatively large storage volumes are especially critical in view of a possible self-ignition.

  9. Effect of adding bulking materials over the composting process of municipal solid biowastes

    Directory of Open Access Journals (Sweden)

    Ricardo Oviedo-Ocaña

    2015-12-01

    Full Text Available Biowastes (BW, the main raw materials for the composting installations in developing countries, are characterized for containing uncooked food wastes (FW, high moisture content, low porosity, acidic pH, and low C/N ratios which affects the overall composting process (CP. In this study, we evaluated the effect of adding sugarcane bagasse (SCB and star grass (SG (Cynodon plectostachyus (K. Schum. Pilg. as bulking materials (BM over the quality of the substrate, progress of the process, and quality of the obtained product. In this sense, two pilot-scale experiments were performed. The first one contained a substrate formed by 78% BW and 22% SCB (pile A. The second experiment contained a substrate formed by 66% BW and 34% SG (pile B. For each experiment, control treatments (piles A' and B' respectively were performed by using 100% BW without BM. The results showed that in both cases the adding of BM improved substrate quality (pH, moisture, and total organic C content [TOC], speeding up the starting step (2-3 d and reducing the duration of the thermophilic phase of CP (3 d. However, the physico-chemical properties of both BM increased cooling and maturation phases duration (between 15 and 20 d. Obtained products quality was improved in terms of higher TOC, cation-exchange capacity, bulk density, and higher water holding capacity. Application of obtained products A and B could improve some soil properties like major nutrient, water retention, and increasing the organic matter.

  10. Connecting point defect parameters with bulk properties to describe diffusion in solids

    Science.gov (United States)

    Chroneos, A.

    2016-12-01

    Diffusion is a fundamental process that can have an impact on numerous technological applications, such as nanoelectronics, nuclear materials, fuel cells, and batteries, whereas its understanding is important across scientific fields including materials science and geophysics. In numerous systems, it is difficult to experimentally determine the diffusion properties over a range of temperatures and pressures. This gap can be bridged by the use of thermodynamic models that link point defect parameters to bulk properties, which are more easily accessible. The present review offers a discussion on the applicability of the cBΩ model, which assumes that the defect Gibbs energy is proportional to the isothermal bulk modulus and the mean volume per atom. This thermodynamic model was first introduced 40 years ago; however, consequent advances in computational modelling and experimental techniques have regenerated the interest of the community in using it to calculate diffusion properties, particularly under extreme conditions. This work examines recent characteristic examples, in which the model has been employed in semiconductor and nuclear materials. Finally, there is a discussion on future directions and systems that will possibly be the focus of studies in the decades to come.

  11. Femtosecond laser surface ablation of transparent solids: understanding the bulk filamentation damage

    Science.gov (United States)

    Kudryashov, Sergey I.; Joglekar, A.; Mourou, G.; Ionin, A. A.; Zvorykin, V. D.; Hunt, A. J.

    2007-06-01

    Direct SEM examination reveals a complex nanoscale structure of deep narrow central channels within shallow wide external craters produced by single-shot high-intensity femtosecond laser radiation on Corning 0211 glass and sapphire surfaces. These internal narrow channels are not expected from ordinary surface melt spallation and expulsion processes characteristic of the external surface nanocraters, but exhibit nearly the same appearance threshold. Surprisingly, the nanochannel radiuses rapidly saturate versus incident laser intensity indicating bulk rather than surface character of laser energy deposition, in contrast to the external craters extending versus laser intensity in a regular manner. These facts may be explained by channeling of electromagnetic radiation by near-surface ablative filamentary propagation of intense femtosecond laser pulses in the highly electronically excited dielectrics, by spherical aberrations in the surface layer, or deep drilling of the samples by short-wavelength Bremsstrahlung radiation of relatively hot surface electron-hole or electron-ion plasma. The double structure of ablated surface nano-features is consistent with similar structures observed for bulk damage features fabricated by femtosecond laser pulses at supercritical laser powers, but much lower laser intensities.

  12. Tunable Quantum Dot Solids: Impact of Interparticle Interactions on Bulk Properties

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, Michael B. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Fan, Hongyou [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Brener, Igal [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Liu, Sheng [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Luk, Ting S. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Li, Binsong [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-09-01

    QD-solids comprising self-assembled semiconductor nanocrystals such as CdSe are currently under investigation for use in a wide array of applications including light emitting diodes, solar cells, field effect transistors, photodetectors, and biosensors. The goal of this LDRD project was develop a fundamental understanding of the relationship between nanoparticle interactions and the different regimes of charge and energy transport in semiconductor quantum dot (QD) solids. Interparticle spacing was tuned through the application of hydrostatic pressure in a diamond anvil cell, and the impact on interparticle interactions was probed using x-ray scattering and a variety of static and transient optical spectroscopies. During the course of this LDRD, we discovered a new, previously unknown, route to synthesize semiconductor quantum wires using high pressure sintering of self-assembled quantum dot crystals. We believe that this new, pressure driven synthesis approach holds great potential as a new tool for nanomaterials synthesis and engineering.

  13. Time Evolution of Reflective Thermal Lenses and Measurement of Thermal Diffusivity in Bulk Solids

    Science.gov (United States)

    Doiron, Serge; Haché, Alain

    2004-07-01

    A simple method for optically measuring the thermal diffusivity of solids is demonstrated. The thermal displacement created on a substrate by a focused laser beam is determined from the divergence that it induces in a weak probe beam. The dynamics of the surface lens and the amplitude of the probe beam's divergence are then used to determine the thermal diffusivity of the substrate. Several materials that span a wide range of thermal properties are studied.

  14. Simple Rules for Solid-state Design: From Bulk to Interface

    Science.gov (United States)

    Butler, Keith; Walsh, Aron; Jackson, Adam; Davies, Dan; Oba, Fumiyasu; Kumagai, Yu; Walsh Materials Design Team; JSPS Collaboration

    High-throughput screening enterprises such as Materials Project and the OQMD are well suited to the application of density functional theory for assessing the merits of known bulk materials. The blind exploration of the new combinations and permutations of the periodic table is a daunting task, to paraphrase Samuel Beckett we feel lost before the confusion of innumerable prospects. Centuries of research have provided us with myriad rules for assessing the feasibility of a given stoichiometry and the likelihood of particular crystal arrangements. We explore the ways in which chemical knowledge and state-of-the-art computational physics can be combined to accelerate materials design. We present the SMACT (Semiconducting Materials by Analogy and Chemical Theory) package, which combines these rules with searching of chemical space to predict plausible and heretofore unknown compounds. I will then provide some illustrative examples of materials' design focusing on several important issues: (i) designing new photovoltaic materials, (ii) the role of surfaces and polymorphism in controlling electronic properties, and (iii) the design of porous materials.

  15. Integrated Solid/Nanoporous Copper/Oxide Hybrid Bulk Electrodes for High-performance Lithium-Ion Batteries

    Science.gov (United States)

    Hou, Chao; Lang, Xing-You; Han, Gao-Feng; Li, Ying-Qi; Zhao, Lei; Wen, Zi; Zhu, Yong-Fu; Zhao, Ming; Li, Jian-Chen; Lian, Jian-She; Jiang, Qing

    2013-01-01

    Nanoarchitectured electroactive materials can boost rates of Li insertion/extraction, showing genuine potential to increase power output of Li-ion batteries. However, electrodes assembled with low-dimensional nanostructured transition metal oxides by conventional approach suffer from dramatic reductions in energy capacities owing to sluggish ion and electron transport kinetics. Here we report that flexible bulk electrodes, made of three-dimensional bicontinuous nanoporous Cu/MnO2 hybrid and seamlessly integrated with Cu solid current collector, substantially optimizes Li storage behavior of the constituent MnO2. As a result of the unique integration of solid/nanoporous hybrid architecture that simultaneously enhances the electron transport of MnO2, facilitates fast ion diffusion and accommodates large volume changes on Li insertion/extraction of MnO2, the supported MnO2 exhibits a stable capacity of as high as ~1100 mA h g−1 for 1000 cycles, and ultrahigh charge/discharge rates. It makes the environmentally friendly and low-cost electrode as a promising anode for high-performance Li-ion battery applications. PMID:24096928

  16. 33 CFR 127.313 - Bulk storage.

    Science.gov (United States)

    2010-07-01

    ...) WATERFRONT FACILITIES WATERFRONT FACILITIES HANDLING LIQUEFIED NATURAL GAS AND LIQUEFIED HAZARDOUS GAS Waterfront Facilities Handling Liquefied Natural Gas Operations § 127.313 Bulk storage. (a) The...

  17. Solid state synthesis and characterization of bulk β-FeSe superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Onar, K. [İnönü Üniversitesi, Fen Edebiyat Fakültesi, Fizik Bölümü, 44280 Malatya (Turkey); Yakinci, M.E. [İnönü Üniversitesi, Fen Edebiyat Fakültesi, Fizik Bölümü, 44280 Malatya (Turkey); İnönü Üniversitesi, Mühendislik Fakültesi, Biyomedikal Mühendisliği Bölümü, 44280 Malatya (Turkey)

    2015-01-25

    Highlights: • The upper critical field H{sub c2}(0) was determined to be 23.2 T. • At the zero field coherence length value was calculated to be 3.33 nm. • Calculated μ{sub 0}H{sub c2}(0)/k{sub B}T{sub c} rate was found to be 3.17 T/K. • Obtained results were suggested unconventional nature of superconductivity. - Abstract: Polycrystalline FeSe{sub 0.88} was synthesized by solid-state reaction method in sealed quartz tube at different heat heating cycles. The identification and characterization of FeSe{sub 0.88} samples were determined by X-ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Energy Dispersive X-ray Spectroscopy (EDX). The electrical transport, magnetic and thermal transport properties of the obtained samples were also investigated. The results showed that the sensitivity of resistivity and magnetic susceptibility depends on heating cycles while the structural formation of samples does not. The upper critical field H{sub c2}(0) has been determined with the magnetic field parallel to the sample surface and yielding a maximum value of 23.2 T. At the zero field coherence length, ξ, value was calculated to be 3.33 nm. Calculated μ{sub 0}H{sub c2}(0)/k{sub B}T{sub c} rate indicated comparably higher value (3.17 T/K) than the Pauli limit (1.84 T/K) and obtained results were suggested unconventional nature of superconductivity in our samples.

  18. Determination of the main solid-state form of albendazole in bulk drug, employing Raman spectroscopy coupled to multivariate analysis.

    Science.gov (United States)

    Calvo, Natalia L; Arias, Juan M; Altabef, Aída Ben; Maggio, Rubén M; Kaufman, Teodoro S

    2016-09-10

    Albendazole (ALB) is a broad-spectrum anthelmintic, which exhibits two solid-state forms (Forms I and II). The Form I is the metastable crystal at room temperature, while Form II is the stable one. Because the drug has poor aqueous solubility and Form II is less soluble than Form I, it is desirable to have a method to assess the solid-state form of the drug employed for manufacturing purposes. Therefore, a Partial Least Squares (PLS) model was developed for the determination of Form I of ALB in its mixtures with Form II. For model development, both solid-state forms of ALB were prepared and characterized by microscopic (optical and with normal and polarized light), thermal (DSC) and spectroscopic (ATR-FTIR, Raman) techniques. Mixtures of solids in different ratios were prepared by weighing and mechanical mixing of the components. Their Raman spectra were acquired, and subjected to peak smoothing, normalization, standard normal variate correction and de-trending, before performing the PLS calculations. The optimal spectral region (1396-1280cm(-1)) and number of latent variables (LV=3) were obtained employing a moving window of variable size strategy. The method was internally validated by means of the leave one out procedure, providing satisfactory statistics (r(2)=0.9729 and RMSD=5.6%) and figures of merit (LOD=9.4% and MDDC=1.4). Furthermore, the method's performance was also evaluated by analysis of two validation sets. Validation set I was used for assessment of linearity and range and Validation set II, to demonstrate accuracy and precision (Recovery=101.4% and RSD=2.8%). Additionally, a third set of spiked commercial samples was evaluated, exhibiting excellent recoveries (94.2±6.4%). The results suggest that the combination of Raman spectroscopy with multivariate analysis could be applied to the assessment of the main crystal form and its quantitation in samples of ALB bulk drug, in the routine quality control laboratory. Copyright © 2016 Elsevier B.V. All

  19. Pyrosequencing reveals bacterial communities in unchlorinated drinking water distribution system: an integral study of bulk water, suspended solids, loose deposits, and pipe wall biofilm.

    Science.gov (United States)

    Liu, G; Bakker, G L; Li, S; Vreeburg, J H G; Verberk, J Q J C; Medema, G J; Liu, W T; Van Dijk, J C

    2014-05-20

    The current understanding of drinking water distribution system (DWDS) microbiology is limited to pipe wall biofilm and bulk water; the contributions of particle-associated bacteria (from suspended solids and loose deposits) have long been neglected. Analyzing the composition and correlation of bacterial communities from different phases helped us to locate where most of the bacteria are and understand the interactions among these phases. In the present study, the bacteria from four critical phases of an unchlorinated DWDS, including bulk water, pipe wall biofilm, suspended solids, and loose deposits, were quantified and identified by adenosine triphosphate analysis and pyrosequencing, respectively. The results showed that the bulk water bacteria (including the contribution of suspended solids) contributed less than 2% of the total bacteria. The bacteria associated with loose deposits and pipe wall biofilm that accumulated in the DWDS accounted for over 98% of the total bacteria, and the contributions of bacteria in loose deposits and pipe wall biofilm were comparable. Depending on the amount of loose deposits, its contribution can be 7-fold higher than the pipe wall biofilm. Pyrosequencing revealed relatively stable bacterial communities in bulk water, pipe wall biofilm, and suspended solids throughout the distribution system; however, the communities present in loose deposits were dependent on the amount of loose deposits locally. Bacteria within the phases of suspended solids, loose deposits, and pipe wall biofilm were similar in phylogenetic composition. The bulk water bacteria (dominated by Polaromonas spp.) were clearly different from the bacteria from the other three phases (dominated by Sphingomonas spp.). This study highlighted that the integral DWDS ecology should include contributions from all of the four phases, especially the bacteria harbored by loose deposits. The accumulation of loose deposits and the aging process create variable microenvironments

  20. Pyrosequencing Reveals Bacterial Communities in Unchlorinated Drinking Water Distribution System: An Integral Study of Bulk Water, Suspended Solids, Loose Deposits, and Pipe Wall Biofilm

    KAUST Repository

    Liu, G.

    2014-05-20

    The current understanding of drinking water distribution system (DWDS) microbiology is limited to pipe wall biofilm and bulk water; the contributions of particle-associated bacteria (from suspended solids and loose deposits) have long been neglected. Analyzing the composition and correlation of bacterial communities from different phases helped us to locate where most of the bacteria are and understand the interactions among these phases. In the present study, the bacteria from four critical phases of an unchlorinated DWDS, including bulk water, pipe wall biofilm, suspended solids, and loose deposits, were quantified and identified by adenosine triphosphate analysis and pyrosequencing, respectively. The results showed that the bulk water bacteria (including the contribution of suspended solids) contributed less than 2% of the total bacteria. The bacteria associated with loose deposits and pipe wall biofilm that accumulated in the DWDS accounted for over 98% of the total bacteria, and the contributions of bacteria in loose deposits and pipe wall biofilm were comparable. Depending on the amount of loose deposits, its contribution can be 7-fold higher than the pipe wall biofilm. Pyrosequencing revealed relatively stable bacterial communities in bulk water, pipe wall biofilm, and suspended solids throughout the distribution system; however, the communities present in loose deposits were dependent on the amount of loose deposits locally. Bacteria within the phases of suspended solids, loose deposits, and pipe wall biofilm were similar in phylogenetic composition. The bulk water bacteria (dominated by Polaromonas spp.) were clearly different from the bacteria from the other three phases (dominated by Sphingomonas spp.). This study highlighted that the integral DWDS ecology should include contributions from all of the four phases, especially the bacteria harbored by loose deposits. The accumulation of loose deposits and the aging process create variable microenvironments

  1. Temperature and volumetric water content petrophysical relationships in municipal solid waste for the interpretation of bulk electrical resistivity data

    Science.gov (United States)

    Pilawski, Tamara; Dumont, Gaël; Nguyen, Frédéric

    2015-04-01

    Landfills pose major environmental issues including long-term methane emissions, and local pollution of soil and aquifers but can also be seen as potential energy resources and mining opportunities. Water content in landfills determine whether solid fractions can be separated and recycled, and controls the existence and efficiency of natural or enhanced biodegradation. Geophysical techniques, such as electrical and electromagnetic methods have proven successful in the detection and qualitative investigation of sanitary landfills. However, their interpretation in terms of quantitative water content estimates makes it more challenging due to the influence of parameters such as temperature, compaction, waste composition or pore fluid. To improve the confidence given to bulk electrical resistivity data and to their interpretation, we established temperature and volumetric water content petrophysical relationships that we tested on field and laboratory electrical resistivity measurements. We carried out two laboratory experiments on leachates and waste samples from a landfill located in Mont-Saint-Guibert, Belgium. We determined a first relationship between temperature and electrical resistivity with pure and diluted leachates by progressively increasing the temperature from 5°C to 65°C, and then cooling down to 5°C. The second relationship was obtained by measuring electrical resistivity on waste samples of different volumetric water contents. First, we used the correlations obtained from the experiments to compare electrical resistivity measurements performed in a landfill borehole and on reworked waste samples excavated at different depths. Electrical resistivities were measured every 20cm with an electromagnetic logging device (EM39) while a temperature profile was acquired with optic fibres. Waste samples were excavated every 2m in the same borehole. We filled experimental columns with these samples and measured electrical resistivities at laboratory temperature

  2. Addressing the Interface Issues in All-Solid-State Bulk-Type Lithium Ion Battery via an All-Composite Approach.

    Science.gov (United States)

    Chen, Ru-Jun; Zhang, Yi-Bo; Liu, Ting; Xu, Bing-Qing; Lin, Yuan-Hua; Nan, Ce-Wen; Shen, Yang

    2017-03-22

    All-solid-state bulk-type lithium ion batteries (LIBs) are considered ultimate solutions to the safety issues associated with conventional LIBs using flammable liquid electrolyte. The development of bulk-type all-solid-state LIBs has been hindered by the low loading of active cathode materials, hence low specific surface capacity, and by the high interface resistance, which results in low rate and cyclic performance. In this contribution, we propose and demonstrate a synergistic all-composite approach to fabricating flexible all-solid-state LIBs. PEO-based composite cathode layers (filled with LiFePO4 particles) of ∼300 μm in thickness and composite electrolyte layers (filled with Al-LLZTO particles) are stacked layer-by-layer with lithium foils as negative layer and hot-pressed into a monolithic all-solid-state LIB. The flexible LIB delivers a high specific discharge capacity of 155 mAh/g, which corresponds to an ultrahigh surface capacity of 10.8 mAh/cm(2), exhibits excellent capacity retention up to at least 10 cycles and could work properly under harsh operating conditions such as bending or being sectioned into pieces. The all-composite approach is favorable for improving both mesoscopic and microscopic interfaces inside the all-solid-state LIB and may provide a new toolbox for design and fabrication of all-solid-state LIBs.

  3. Bisphenol A in Solid Waste Materials, Leachate Water, and Air Particles from Norwegian Waste-Handling Facilities: Presence and Partitioning Behavior.

    Science.gov (United States)

    Morin, Nicolas; Arp, Hans Peter H; Hale, Sarah E

    2015-07-07

    The plastic additive bisphenol A (BPA) is commonly found in landfill leachate at levels exceeding acute toxicity benchmarks. To gain insight into the mechanisms controlling BPA emissions from waste and waste-handling facilities, a comprehensive field and laboratory campaign was conducted to quantify BPA in solid waste materials (glass, combustibles, vehicle fluff, waste electric and electronic equipment (WEEE), plastics, fly ash, bottom ash, and digestate), leachate water, and atmospheric dust from Norwegian sorting, incineration, and landfill facilities. Solid waste concentrations varied from below 0.002 mg/kg (fly ash) to 188 ± 125 mg/kg (plastics). A novel passive sampling method was developed to, for the first time, establish a set of waste-water partition coefficients, KD,waste, for BPA, and to quantify differences between total and freely dissolved concentrations in waste-facility leachate. Log-normalized KD,waste (L/kg) values were similar for all solid waste materials (from 2.4 to 3.1), excluding glass and metals, indicating BPA is readily leachable. Leachate concentrations were similar for landfills and WEEE/vehicle sorting facilities (from 0.7 to 200 μg/L) and dominated by the freely dissolved fraction, not bound to (plastic) colloids (agreeing with measured KD,waste values). Dust concentrations ranged from 2.3 to 50.7 mg/kgdust. Incineration appears to be an effective way to reduce BPA concentrations in solid waste, dust, and leachate.

  4. Nonlinear Acoustics of Bounded Solid-Reflection and Refraction of Second-Order Bulk Waves(Ⅱ)——SV- or SH- Wave Incidence

    Institute of Scientific and Technical Information of China (English)

    钱祖文

    1994-01-01

    In the case of SV- or SH-wave oblique incidence,the reflection and refraction of the second-order bulk waves resulting from a plane boundary between two solid media are investigated and the mathematical expressions of them are given.It is shown that an SH-wave incidence is absolutely necessary to an overall knowledge of the relationship between the TOEs for isotropic solid.The importance of both contributions of the nonaccumulation waves and the effects of the boundary surface are indicated by numerical computation.

  5. Superconducting and mechanical properties of the bulk Bi(pb)SCCO system prepared via solid state and ammonium nitrate precipitation methods

    Science.gov (United States)

    Safran, S.; Kılıçarslan, E.; Ozturk, H.; Alp, M.; Akdogan, M.; Asikuzun, E.; Ozturk, O.; Kılıç, A.

    2015-09-01

    We have investigated the effect of preparation method on superconducting and mechanical properties of Bi(Pb)-2223 bulk samples using Bi1.85Pb0.35Sr2Ca2Cu3O10±y stoichiometry. Solid-state reaction and ammonium nitrate precipitation methods have been used for fabrication of the bulk samples. In addition, the effect of annealing time on BSCCO samples have been studied. Structural, electrical, magnetic and microhardness analyses of samples are performed by the X-ray powder diffraction (XRD), the Scanning Electron Microscopy (SEM), DC resistivity, AC susceptibility and Vickers microhardness test. The critical transition temperature, phase purity, surface morphology and crystallinity of the prepared bulk samples are compared with each other. Elasticity (E), brittleness (Bi), fracture toughness (KIC) and yield strength (Y) values are also determined according to annealing time, applied load and production parameters of materials.

  6. Viscosity of ashes from energy production and municipal solid waste handling: A comparative study between two different experimental setups

    DEFF Research Database (Denmark)

    Arvelakis, Stelios; Frandsen, Flemming; Folkedahl, B.

    2008-01-01

    This paper discusses the viscosity characteristics of ash fractions produced from the co-combustion of coal and biomass in a pilot-scale pulverized fuel (PF) boiler and from the incineration of municipal solid waste (MSW) in a Danish incinerator that were determined using the high-temperature rot......This paper discusses the viscosity characteristics of ash fractions produced from the co-combustion of coal and biomass in a pilot-scale pulverized fuel (PF) boiler and from the incineration of municipal solid waste (MSW) in a Danish incinerator that were determined using the high......-temperature rotational viscometer method. Two different Setups in the United States and Denmark were purchased by the same company, HAAKE, but different versions of the basic instrument were used in the study to determine the reproducibility of the method. The two sets of measurements show that the method generates...

  7. Lunar Materials Handling System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Lunar Materials Handling System (LMHS) is a method for transfer of bulk materials and products into and out of process equipment in support of lunar and Mars in...

  8. Simultaneous probing of bulk liquid phase and catalytic gas-liquid-solid interface under working conditions using attenuated total reflection infrared spectroscopy.

    Science.gov (United States)

    Meemken, Fabian; Müller, Philipp; Hungerbühler, Konrad; Baiker, Alfons

    2014-08-01

    Design and performance of a reactor set-up for attenuated total reflection infrared (ATR-IR) spectroscopy suitable for simultaneous reaction monitoring of bulk liquid and catalytic solid-liquid-gas interfaces under working conditions are presented. As advancement of in situ spectroscopy an operando methodology for gas-liquid-solid reaction monitoring was developed that simultaneously combines catalytic activity and molecular level detection at the catalytically active site of the same sample. Semi-batch reactor conditions are achieved with the analytical set-up by implementing the ATR-IR flow-through cell in a recycle reactor system and integrating a specifically designed gas feeding system coupled with a bubble trap. By the use of only one spectrometer the design of the new ATR-IR reactor cell allows for simultaneous detection of the bulk liquid and the catalytic interface during the working reaction. Holding two internal reflection elements (IRE) the sample compartments of the horizontally movable cell are consecutively flushed with reaction solution and pneumatically actuated, rapid switching of the cell (interface on a catalyst-coated IRE and in the bulk liquid on a blank IRE. For a complex heterogeneous reaction, the asymmetric hydrogenation of 2,2,2-trifluoroacetophenone on chirally modified Pt catalyst the elucidation of catalytic activity/enantioselectivity coupled with simultaneous monitoring of the catalytic solid-liquid-gas interface is shown. Both catalytic activity and enantioselectivity are strongly dependent on the experimental conditions. The opportunity to gain improved understanding by coupling measurements of catalytic performance and spectroscopic detection is presented. In addition, the applicability of modulation excitation spectroscopy and phase-sensitive detection are demonstrated.

  9. Simultaneous probing of bulk liquid phase and catalytic gas-liquid-solid interface under working conditions using attenuated total reflection infrared spectroscopy

    Science.gov (United States)

    Meemken, Fabian; Müller, Philipp; Hungerbühler, Konrad; Baiker, Alfons

    2014-08-01

    Design and performance of a reactor set-up for attenuated total reflection infrared (ATR-IR) spectroscopy suitable for simultaneous reaction monitoring of bulk liquid and catalytic solid-liquid-gas interfaces under working conditions are presented. As advancement of in situ spectroscopy an operando methodology for gas-liquid-solid reaction monitoring was developed that simultaneously combines catalytic activity and molecular level detection at the catalytically active site of the same sample. Semi-batch reactor conditions are achieved with the analytical set-up by implementing the ATR-IR flow-through cell in a recycle reactor system and integrating a specifically designed gas feeding system coupled with a bubble trap. By the use of only one spectrometer the design of the new ATR-IR reactor cell allows for simultaneous detection of the bulk liquid and the catalytic interface during the working reaction. Holding two internal reflection elements (IRE) the sample compartments of the horizontally movable cell are consecutively flushed with reaction solution and pneumatically actuated, rapid switching of the cell (<1 s) enables to quasi simultaneously follow the heterogeneously catalysed reaction at the catalytic interface on a catalyst-coated IRE and in the bulk liquid on a blank IRE. For a complex heterogeneous reaction, the asymmetric hydrogenation of 2,2,2-trifluoroacetophenone on chirally modified Pt catalyst the elucidation of catalytic activity/enantioselectivity coupled with simultaneous monitoring of the catalytic solid-liquid-gas interface is shown. Both catalytic activity and enantioselectivity are strongly dependent on the experimental conditions. The opportunity to gain improved understanding by coupling measurements of catalytic performance and spectroscopic detection is presented. In addition, the applicability of modulation excitation spectroscopy and phase-sensitive detection are demonstrated.

  10. Simultaneous probing of bulk liquid phase and catalytic gas-liquid-solid interface under working conditions using attenuated total reflection infrared spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Meemken, Fabian; Müller, Philipp; Hungerbühler, Konrad; Baiker, Alfons, E-mail: baiker@chem.ethz.ch [Department of Chemistry and Applied Biosciences, Institute for Chemical and Bioengineering, ETH Zürich, Hönggerberg, HCI, CH-8093 Zürich (Switzerland)

    2014-08-15

    Design and performance of a reactor set-up for attenuated total reflection infrared (ATR-IR) spectroscopy suitable for simultaneous reaction monitoring of bulk liquid and catalytic solid-liquid-gas interfaces under working conditions are presented. As advancement of in situ spectroscopy an operando methodology for gas-liquid-solid reaction monitoring was developed that simultaneously combines catalytic activity and molecular level detection at the catalytically active site of the same sample. Semi-batch reactor conditions are achieved with the analytical set-up by implementing the ATR-IR flow-through cell in a recycle reactor system and integrating a specifically designed gas feeding system coupled with a bubble trap. By the use of only one spectrometer the design of the new ATR-IR reactor cell allows for simultaneous detection of the bulk liquid and the catalytic interface during the working reaction. Holding two internal reflection elements (IRE) the sample compartments of the horizontally movable cell are consecutively flushed with reaction solution and pneumatically actuated, rapid switching of the cell (<1 s) enables to quasi simultaneously follow the heterogeneously catalysed reaction at the catalytic interface on a catalyst-coated IRE and in the bulk liquid on a blank IRE. For a complex heterogeneous reaction, the asymmetric hydrogenation of 2,2,2-trifluoroacetophenone on chirally modified Pt catalyst the elucidation of catalytic activity/enantioselectivity coupled with simultaneous monitoring of the catalytic solid-liquid-gas interface is shown. Both catalytic activity and enantioselectivity are strongly dependent on the experimental conditions. The opportunity to gain improved understanding by coupling measurements of catalytic performance and spectroscopic detection is presented. In addition, the applicability of modulation excitation spectroscopy and phase-sensitive detection are demonstrated.

  11. Handling the influence of chemical shift in amplitude-modulated heteronuclear dipolar recoupling solid-state NMR

    Science.gov (United States)

    Basse, Kristoffer; Shankar, Ravi; Bjerring, Morten; Vosegaard, Thomas; Nielsen, Niels Chr.; Nielsen, Anders B.

    2016-09-01

    We present a theoretical analysis of the influence of chemical shifts on amplitude-modulated heteronuclear dipolar recoupling experiments in solid-state NMR spectroscopy. The method is demonstrated using the Rotor Echo Short Pulse IRrAdiaTION mediated Cross-Polarization (RESPIRATIONCP) experiment as an example. By going into the pulse sequence rf interaction frame and employing a quintuple-mode operator-based Floquet approach, we describe how chemical shift offset and anisotropic chemical shift affect the efficiency of heteronuclear polarization transfer. In this description, it becomes transparent that the main attribute leading to non-ideal performance is a fictitious field along the rf field axis, which is generated from second-order cross terms arising mainly between chemical shift tensors and themselves. This insight is useful for the development of improved recoupling experiments. We discuss the validity of this approach and present quaternion calculations to determine the effective resonance conditions in a combined rf field and chemical shift offset interaction frame transformation. Based on this, we derive a broad-banded version of the RESPIRATIONCP experiment. The new sequence is experimentally verified using SNNFGAILSS amyloid fibrils where simultaneous 15N → 13CO and 15N → 13Cα coherence transfer is demonstrated on high-field NMR instrumentation, requiring great offset stability.

  12. Rungs 1 to 4 of DFT Jacob's ladder: Extensive test on the lattice constant, bulk modulus, and cohesive energy of solids

    Science.gov (United States)

    Tran, Fabien; Stelzl, Julia; Blaha, Peter

    2016-05-01

    A large panel of old and recently proposed exchange-correlation functionals belonging to rungs 1 to 4 of Jacob's ladder of density functional theory are tested (with and without a dispersion correction term) for the calculation of the lattice constant, bulk modulus, and cohesive energy of solids. Particular attention will be paid to the functionals MGGA_MS2 [J. Sun et al., J. Chem. Phys. 138, 044113 (2013)], mBEEF [J. Wellendorff et al., J. Chem. Phys. 140, 144107 (2014)], and SCAN [J. Sun et al., Phys. Rev. Lett. 115, 036402 (2015)] which are meta-generalized gradient approximations (meta-GGA) and are developed with the goal to be universally good. Another goal is also to determine for which semilocal functionals and groups of solids it is beneficial (or not necessary) to use the Hartree-Fock exchange or a dispersion correction term. It is concluded that for strongly bound solids, functionals of the GGA, i.e., rung 2 of Jacob's ladder, are as accurate as the more sophisticated functionals of the higher rungs, while it is necessary to use dispersion corrected functionals in order to expect at least meaningful results for weakly bound solids. If results for finite systems are also considered, then the meta-GGA functionals are overall clearly superior to the GGA functionals.

  13. Estimation of particle velocity in moving beds based on a flow model for bulk solids. Ryudo model ni motozuita idoso no ryushi sokudo no suisan

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, H. (Muroran Inst. of Tech., Hokkaido (Japan)); Honda, Y. (Snow Brand Milk Products Co. Ltd., Sapporo (Japan))

    1992-11-10

    Based on a particle flow model (stress-shear strain velocity relational expression) which takes account of the bulk volume expansion effect during shearing deformation of particles, a new estimation method for particle velocity distribution and stress distribution is proposed. The method is applied to a crossflow moving bed and to a moving bed for comparison with the experimental values to examine its validity. The method is further extended to predict the velocity profile and stress profile of moving beds in a vertical tube (countercurrent and concurrent) accompanying gas flow. It is indicated that the bulk volume expansion effect differs according to dimensions. The velocity distribution and the stress distribution of flows in a vertical tube are greatly influenced by the nature of the flow, i.e. whether it is a counterflow or a concurrent flow, and the frictional force of solids on a wall surface increases markedly in a concurrent flow, which induces considerable lag of particle velocity. The parameter which is contained in the model and indicates the bulk volume expansion effect is a function of the particle velocity, and it is almost unaffected by the flow rate of gas moving. 7 refs., 10 figs.

  14. Superconducting and mechanical properties of the bulk Bi(pb)SCCO system prepared via solid state and ammonium nitrate precipitation methods

    Energy Technology Data Exchange (ETDEWEB)

    Safran, S., E-mail: safran@science.ankara.edu.tr [Ankara University, Faculty of Science, Department of Physics, Tandoğan, Ankara 06100 (Turkey); Center of Excellence for Superconductivity Research, 50 Year Campus, Golbaşı, Ankara (Turkey); Kılıçarslan, E.; Ozturk, H. [Ankara University, Faculty of Science, Department of Physics, Tandoğan, Ankara 06100 (Turkey); Center of Excellence for Superconductivity Research, 50 Year Campus, Golbaşı, Ankara (Turkey); Alp, M. [Center of Excellence for Superconductivity Research, 50 Year Campus, Golbaşı, Ankara (Turkey); Akdogan, M. [Center of Excellence for Superconductivity Research, 50 Year Campus, Golbaşı, Ankara (Turkey); Abant İzzet Baysal University, Department of Physics, Bolu (Turkey); Asikuzun, E.; Ozturk, O. [Kastamonu University, Department of Physics, Kastamonu (Turkey); Kastamonu University, Research and Application Center, Kastamonu (Turkey); Kılıç, A. [Ankara University, Faculty of Science, Department of Physics, Tandoğan, Ankara 06100 (Turkey); Center of Excellence for Superconductivity Research, 50 Year Campus, Golbaşı, Ankara (Turkey)

    2015-09-01

    We have investigated the effect of preparation method on superconducting and mechanical properties of Bi(Pb)-2223 bulk samples using Bi{sub 1.85}Pb{sub 0.35}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10±y} stoichiometry. Solid-state reaction and ammonium nitrate precipitation methods have been used for fabrication of the bulk samples. In addition, the effect of annealing time on BSCCO samples have been studied. Structural, electrical, magnetic and microhardness analyses of samples are performed by the X-ray powder diffraction (XRD), the Scanning Electron Microscopy (SEM), DC resistivity, AC susceptibility and Vickers microhardness test. The critical transition temperature, phase purity, surface morphology and crystallinity of the prepared bulk samples are compared with each other. Elasticity (E), brittleness (B{sub i}), fracture toughness (K{sub IC}) and yield strength (Y) values are also determined according to annealing time, applied load and production parameters of materials.

  15. Kollektiv Handling

    DEFF Research Database (Denmark)

    Toubøl, Jonas

    2012-01-01

    Boganmeldelse af Flemming Ibsen, Laust Høgedahl & Steen Sheuer: Kollektiv Handling. Faglig organisering og skift af fagforening. Nyt fra Samfundsvidenskaberne, Frederiksberg, 2012.......Boganmeldelse af Flemming Ibsen, Laust Høgedahl & Steen Sheuer: Kollektiv Handling. Faglig organisering og skift af fagforening. Nyt fra Samfundsvidenskaberne, Frederiksberg, 2012....

  16. 49 CFR 173.211 - Non-bulk packagings for solid hazardous materials in Packing Group I.

    Science.gov (United States)

    2010-10-01

    ... in Packing Group I. 173.211 Section 173.211 Transportation Other Regulations Relating to... materials in Packing Group I. (a) When § 172.101 of this subchapter specifies that a solid hazardous... of part 173, to the requirements of part 178 of this subchapter at the Packing Group I...

  17. 49 CFR 173.213 - Non-bulk packagings for solid hazardous materials in Packing Group III.

    Science.gov (United States)

    2010-10-01

    ... in Packing Group III. 173.213 Section 173.213 Transportation Other Regulations Relating to... materials in Packing Group III. (a) When § 172.101 of this subchapter specifies that a solid hazardous... of part 173, to the requirements of part 178 of this subchapter at the Packing Group I, II or...

  18. 49 CFR 173.212 - Non-bulk packagings for solid hazardous materials in Packing Group II.

    Science.gov (United States)

    2010-10-01

    ... in Packing Group II. 173.212 Section 173.212 Transportation Other Regulations Relating to... materials in Packing Group II. (a) When § 172.101 of this subchapter specifies that a solid hazardous... of part 173, to the requirements of part 178 of this subchapter at the Packing Group I or...

  19. Simulation study of a chaotic cavity transducer based virtual phased array used for focusing in the bulk of a solid material.

    Science.gov (United States)

    Delrue, Steven; Van Den Abeele, Koen; Matar, Olivier Bou

    2016-04-01

    In acoustic and ultrasonic non-destructive testing techniques, it is sometimes beneficial to concentrate sound energy at a chosen location in space and at a specific instance in time, for example to improve the signal-to-noise ratio or activate the nonlinearity of damage features. Time Reversal (TR) techniques, taking advantage of the reversible character of the wave equation, are particularly suited to focus ultrasonic waves in time and space. The characteristics of the energy focusing in solid media using principles of time reversed acoustics are highly influenced by the nature and dimensions of the medium, the number of transducers and the length of the received signals. Usually, a large number of transducers enclosing the domain of interest is needed to improve the quality of the focusing. However, in the case of highly reverberant media, the number of transducers can be reduced to only one (single-channel TR). For focusing in a non-reverberant medium, which is impossible when using only one source, an adaptation of the single-channel reciprocal TR procedure has been recently suggested by means of a Chaotic Cavity Transducer (CCT), a single element transducer glued on a cavity of chaotic shape. In this paper, a CCT is used to focus elastic energy, at different times, in different points along a predefined line on the upper surface of a thick solid sample. Doing so, all focusing points can act as a virtual phased array transducer, allowing to focus in any point along the depth direction of the sample. This is impossible using conventional reciprocal TR, as you need to have access to all points in the bulk of the material for detecting signals to be used in the TR process. To asses and provide a better understanding of this concept, a numerical study has been developed, allowing to verify the basic concepts of the virtual phased array and to illustrate multi-component time reversal focusing in the bulk of a solid material.

  20. Master-slave Genetic Algorithm for Forklift Truck Scheduling in Port Bulk Cargo Handling%港口散货物流铲车调度的主-从级遗传算法研究

    Institute of Scientific and Technical Information of China (English)

    张维存; 康凯; 崔婷玉; 冯娇

    2011-01-01

    Through analyzing the relationship between forklift trucks and the service-ready cargo trucks waiting at the docking slot, the paper proposes to use the master-slave genetic algorithm to solve the scheduling problem of forklift trucks in port bulk cargo handling. To be more specific, as the first step, a mathematical model aimed for shortening the waiting time of the cargo trucks is formulated; secondly after an analysis of the relationship between cargo trucks and forklift trucks in the scheduling process, a real number coded genetic algorithm with master-slave structure is put forward together with its decoding method; finally an empirical example is used to verify the effectiveness of the method and to present the optimum solution in Cantt chart.%通过分析货位上待服务的货车与铲车之间的关系,提出了利用主-从级遗传算法解决该类物流铲车调度问题.首先,建立了以缩短顾客停留时间为目标的数学模型.通过分析铲车调度过程中铲车与货车之间的关系,提出了采用实数编码的主-从两级遗传算法及其解码方法,最后通过一个应用实例的分析验证了此算法的有效性,并将最优解通过甘特图的形式展现出来.

  1. Development of high-power and high-energy 2 µm bulk solid-state lasers and amplifiers

    CSIR Research Space (South Africa)

    Koen, W

    2016-04-01

    Full Text Available with the proliferation of both neodymium solid-state lasers as well as diode lasers. Mid-infrared laser sources in the 2-5 µm region, however, lagged behind in both power and availability. Even though they were demonstrated soon after the first laser was developed... for aircraft from anti-aircraft missiles. Mid-infrared lasers may also be used as target designators and for range finding. Free space communication is also possible, provided the laser wavelength coincides with an atmospheric transmission window, as shown...

  2. Anhydrous ringwoodites in the mantle transition zone: Their bulk modulus, solid solution behavior, compositional variation, and sound velocity feature

    Directory of Open Access Journals (Sweden)

    Xi Liu

    2016-06-01

    Full Text Available The isothermal bulk moduli of anhydrous Mg2SiO4-ringwoodite (Rw and Fe2SiO4-Rw, and other 4–2 oxide spinels at ambient P-T condition have been evaluated, and empirically fitted to a model as KT0 = 270.8(300 + 0.343(59*V0 + 23.04(269*EN-total, where KT0 is the isothermal bulk modulus in GPa, V0 the unit-cell volume in Å3 and EN-total the electronegativity total of all cations in the chemical formula. This model well reproduces all data used in its calibration, and may be used to predict the KT0 of other 4–2 oxide spinels. Combined with the generally linear volume–composition relationship of the Rw solid solutions along the join Mg2SiO4–Fe2SiO4, this model leads to a much smaller composition effect on the KT0: KT0 = 185.0(1 + 7.0(1*XFe, where XFe is the atomic ratio Fe/(Fe + Mg. Furthermore, a bulk composition-independent compositional variation with P has been disclosed for the Rw at the P-T conditions of the lower part of the mantle transition zone (MTZ: XFe = 0.222(41 – 0.0053(19*P, with P in GPa. The nearly ideal mixing behavior, much smaller composition effect on the bulk modulus, and significant compositional variation of the Rw in the lower part of the MTZ substantially increase the gradients of the Vs-P and Vp-P profiles to generally match those constrained by the seismic reference models PREM and AK135. If there is any global low-T anomaly at the depth of 660 km, its required magnitude is most likely not larger than 200 K.

  3. Solid state synthesis and characterization of bulk FeTe0.5Se0.5 superconductors

    Science.gov (United States)

    Onar, K.; Yakinci, M. E.

    2016-01-01

    FeTe0.5Se0.5 polycrystalline superconductor samples were synthesized by solid- state reaction method at different heating temperatures. The morphological and structural characterization of FeTe0 5Se0.5 samples were carried out by X-rays Diffraction, Scanning Electron Microscope and Energy Dispersive X-ray Spectroscopy. The electrical, magnetic and thermal transport properties were investigated up to 8 T by using physical property measurement system. The results reveal that the sensitivity of electrical and magnetic properties strongly depends on the heat treatment cycles. The upper critical field, Hc2(0), was determined with the magnetic field parallel to the sample surface. It gives a maximum value of 36.3 T. The lower critical field, Hc1(T), was obtained as 210, 140 and 70 Oe at 5, 8 and 12 K, respectively. The coherence length, ξ, at the zero field, was calculated to be 1.94 nm and suggested a transparent intergrain boundaries peculiarity. The μ0Hc2(0)/kBTc rate shows higher value (3.36 T/K) than the Pauli limit (1.84 T/K) which suggests unconventional nature of superconductivity for the polycrystalline FeTe0.5Se0.5 superconducting samples.

  4. The effective and dust free receiving station and handling for the low calorific value solid fuels; Tehokas ja poelytoen seospolttoaineiden vastaanottoasema sekae kaesittely- ja kuljetinjaerjestelmae

    Energy Technology Data Exchange (ETDEWEB)

    Nojonen, O. [Finntech Oy, Espoo (Finland); Jaervinen, T. [VTT Energy, Jyvaeskylae (Finland). Energy Use

    1995-12-31

    The aim of the project was to get higher automatization level and improve dust preventing in solid fuel receiving stations. There are two general types of receiving stations in the Finnish power plants: large unloading stations for the side tipping devices of trucks and small ones for the rear tipping devices of trucks. In the first ones the trucks empty their load (approx. 100 m{sup 3} loose bulk density) divided by hauling unit and trailer within few (5-10) minutes into a rectangular box, which depth is approx. 3 m. The discharging causes a strong counter current air and dust flow (20-40 m{sup 3}/s) upwards and the dust will easily spread out all over the station. In the second ones the discharging takes place from the rear of truck and trailer using loadspace conveyor of the vehicle within 20 minutes. The material falls on a (belt) conveyor, which is on the floor level. The problems in side tipping system are connected with dust and surplus time, which is needed for the preparation and completion of unloading and sampling. For the fine dust control has also been tested water spray (fog) nozzles and tried to utilise a settling chamber for the dust stream. Also the using the settling chamber equipped with air suction connections and cyclone separation may be effective. In the rear tipping system are also applied bag filters because of smaller air quantities. The rapid truck positioning and control in the receiving station is one of the presupposition for the fast and accurate unloading. This can be done using ultrasonic sensing methods. Also the ensuring of accurate discharging can be based on the modern technology. One of the basic things is the enlarging of video control (CCD -cameras)

  5. Strong work-hardening behavior induced by the solid solution strengthening of dendrites in TiZr-based bulk metallic glass matrix composites

    Energy Technology Data Exchange (ETDEWEB)

    Ma, D.Q. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Jiao, W.T. [College of Education, Hebei Normal University of Science and Technology, Qinhuangdao 066004 (China); Zhang, Y.F. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Hebei Vocational and Technical College of Building Materials, Qinhuangdao 066004 (China); Wang, B.A.; Li, J.; Zhang, X.Y. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Ma, M.Z., E-mail: mz550509@ysu.edu.cn [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Liu, R.P. [State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China)

    2015-03-05

    Highlights: • Hardness of dendrite of TiZr-based BMGMCs increases. • Strong work-hardening behavior is obtained after solid solution strengthening. • Lattice distortions of dendrite suffering from rapid cooling are detected. - Abstract: A series of TiZr-based bulk metallic glass matrix composites (BMGMCs) with distinguished mechanical properties are successfully fabricated by adding different volume fractions of Ta (Ti{sub 38.8}Zr{sub 28.8}Cu{sub 6.2}Be{sub 16.2}Nb{sub 10} as the basic composition, denoted as Ta{sub 0.0}–Ta{sub 8.0}). Along with the growth of precipitated phase, typical dendritic morphology is fully developed in the TiZr-based BMGMCs of Ta{sub 8.0}. Energy-dispersive spectrometry analysis of the dendrites and glass matrix indicates that the metallic elements of Nb and Ta should preferentially form solid solution into dendrites. The chaotic structure of high-temperature precipitate phase is trapped down by the rapid cooling of the copper-mould. The detected lattice distortions in the dendrites are attributed to the strong solid solution strengthening of the metallic elements of Ti, Zr, Nb, and Ta. These lattice distortions increase the resistance of the dislocation motion and pin the dislocations, thus the strength and hardness of dendrite increase. Dendrites create a strong barrier for the shear band propagation and generate multiple shear bands after solid solution strengthening, thereby providing the TiZr-based BMGMCs with greatly improved capacity to sustain plastic deformation and resistance to brittle fracture. Thus, the TiZr-based BMGMCs possess distinguished work-hardening capability. Among these TiZr-based BMGMCs, the sample Ta{sub 0.5} possesses the largest plastic strain (ε{sub p}) at 20.3% and ultimate strength (σ{sub max}) of 2613 MPa during compressive loading. In addition, the sample of Ta{sub 0.5} exhibits work-hardening up to an ultrahigh tensile strength of 1680 MPa during the tensile process, and then progressively

  6. Cargo handling know-how

    Energy Technology Data Exchange (ETDEWEB)

    Bachman, T.; Fischer, M. [Liebherr-Werk Nenzing GmbH (Austria)

    2004-01-01

    The paper reviews recent bulk handling crane orders from Liebherr. These include mobile harbour cranes at the Port of Dunkirk, a four-rope grab crane at Phu My Port, Vietnam and CBG cranes at Balikpapan Coal Terminal, Indonesia. 4 figs.

  7. Bulk Nanostructured Materials

    Science.gov (United States)

    Koch, C. C.; Langdon, T. G.; Lavernia, E. J.

    2017-09-01

    This paper will address three topics of importance to bulk nanostructured materials. Bulk nanostructured materials are defined as bulk solids with nanoscale or partly nanoscale microstructures. This category of nanostructured materials has historical roots going back many decades but has relatively recent focus due to new discoveries of unique properties of some nanoscale materials. Bulk nanostructured materials are prepared by a variety of severe plastic deformation methods, and these will be reviewed. Powder processing to prepare bulk nanostructured materials requires that the powders be consolidated by typical combinations of pressure and temperature, the latter leading to coarsening of the microstructure. The thermal stability of nanostructured materials will also be discussed. An example of bringing nanostructured materials to applications as structural materials will be described in terms of the cryomilling of powders and their consolidation.

  8. Handling Metalloproteinases.

    Science.gov (United States)

    Fridrich, Sven; Karmilin, Konstantin; Stöcker, Walter

    2016-02-02

    Substrate cleavage by metalloproteinases involves nucleophilic attack on the scissile peptide bond by a water molecule that is polarized by a catalytic metal, usually a zinc ion, and a general base, usually the carboxyl group of a glutamic acid side chain. The zinc ion is most often complexed by imidazole nitrogens of histidine side chains. This arrangement suggests that the physiological pH optimum of most metalloproteinases is in the neutral range. In addition to their catalytic metal ion, many metalloproteinases contain additional transition metal or alkaline earth ions, which are structurally important or modulate the catalytic activity. As a consequence, these enzymes are generally sensitive to metal chelators. Moreover, the catalytic metal can be displaced by adventitious metal ions from buffers or biological fluids, which may fundamentally alter the catalytic function. Therefore, handling, purification, and assaying of metalloproteinases require specific precautions to warrant their stability. Copyright © 2016 John Wiley & Sons, Inc.

  9. Experimental Research on the Determination of the Coefficient of Sliding Wear under Iron Ore Handling Conditions

    Directory of Open Access Journals (Sweden)

    G. Chen

    2017-09-01

    Full Text Available The handling of iron ore bulk solids maintains an increasing trend due to economic development. Because iron ore particles have hard composites and irregular shapes, the bulk solids handling equipment surface can suffer from severe sliding wear. Prediction of equipment surface wear volume is beneficial to the efficient maintenance of worn areas. Archard’s equation provides a theoretical solution to predict wear volume. To use Archard’s equation, the coefficient of sliding wear must be determined. To our best knowledge, the coefficient of sliding wear for iron ore handling conditions has not yet been determined. In this research, using a pin-on-disk tribometer, the coefficients of sliding wear for both Sishen particles and mild steel are determined with regard to iron ore handling conditions. Both naturally irregular and spherical shapes of particles are used to estimate average values of wear rate. Moreover, the hardness and inner structures of Sishen particles are examined, which adds the evidence of the interpretation of wear results. It is concluded that the coefficients of sliding wear can vary largely for both Sishen particle and mild steel. The wear rate decreases from transient- to steady-state. The average coefficient of sliding wear is capable of predicting wear with respect to long distances at the steady-state. Two types of sliding friction are distinguished. In addition, it is found that the temperature rise of the friction pairs has negligible influence on wear rate.

  10. Occupational vitiligo due to unsuspected presence of phenolic antioxidant byproducts in commercial bulk rubber

    Energy Technology Data Exchange (ETDEWEB)

    O' Malley, M.A.; Mathias, C.G.; Priddy, M.; Molina, D.; Grote, A.A.; Halperin, W.E.

    1988-06-01

    We investigated the occurrence of cutaneous depigmentation (vitiligo) among employees of a company that manufactured hydraulic pumps. The interiors of these pumps were injection-molded with rubber. We identified a small but significant cluster of vitiligo cases among a group of employees who frequently handled the rubber used in this injection molding process. Although none of the additives specified in the rubber formulations was a phenolic or catecholic derivative, known to be potential causes of chemically induced vitiligo, gas chromatographic analysis identified a para-substituted phenol (2,4-di-tert-butylphenol, DTBP) in solid samples of the most frequently used rubber. Surface wipe analysis confirmed that workers could be exposed to DTBP from simple handling of the rubber. We subsequently established that the solid bulk rubber used as the base in these stock rubber formulations contained both DTBP and smaller quantities of p-tert-butylphenol. Both had formed as unsuspected byproducts during chemical synthesis of two antioxidants added to the solid bulk rubber by a major rubber supplier. We conclude that the unsuspected presence of potential chemical depigmenting agents in solid bulk rubber, from which industrial rubber products are formulated, may contribute to the occurrence of occupational vitiligo, and that a simple review of ingredients in rubber formulations is inadequate to detect their presence.

  11. Unravelling Li-Ion Transport from Picoseconds to Seconds: Bulk versus Interfaces in an Argyrodite Li6PS5Cl-Li2S All-Solid-State Li-Ion Battery.

    Science.gov (United States)

    Yu, Chuang; Ganapathy, Swapna; de Klerk, Niek J J; Roslon, Irek; van Eck, Ernst R H; Kentgens, Arno P M; Wagemaker, Marnix

    2016-09-01

    One of the main challenges of all-solid-state Li-ion batteries is the restricted power density due to the poor Li-ion transport between the electrodes via the electrolyte. However, to establish what diffusional process is the bottleneck for Li-ion transport requires the ability to distinguish the various processes. The present work investigates the Li-ion diffusion in argyrodite Li6PS5Cl, a promising electrolyte based on its high Li-ion conductivity, using a combination of (7)Li NMR experiments and DFT based molecular dynamics simulations. This allows us to distinguish the local Li-ion mobility from the long-range Li-ion motional process, quantifying both and giving a coherent and consistent picture of the bulk diffusion in Li6PS5Cl. NMR exchange experiments are used to unambiguously characterize Li-ion transport over the solid electrolyte-electrode interface for the electrolyte-electrode combination Li6PS5Cl-Li2S, giving unprecedented and direct quantitative insight into the impact of the interface on Li-ion charge transport in all-solid-state batteries. The limited Li-ion transport over the Li6PS5Cl-Li2S interface, orders of magnitude smaller compared with that in the bulk Li6PS5Cl, appears to be the bottleneck for the performance of the Li6PS5Cl-Li2S battery, quantifying one of the major challenges toward improved performance of all-solid-state batteries.

  12. Impact of Bulk Aggregation on the Electronic Structure of Streptocyanines: Implications for the Solid-State Nonlinear Optical Properties and All-Optical Switching Applications

    KAUST Repository

    Gieseking, Rebecca L.

    2014-10-16

    Polymethine dyes in dilute solutions show many of the electronic and optical properties required for all-optical switching applications. However, in the form of thin films, their aggregation and interactions with counterions do generally strongly limit their utility. Here, we present a theoretical approach combining molecular-dynamics simulations and quantum-chemical calculations to describe the bulk molecular packing of streptocyanines (taken as representative of simple polymethines) with counterions of different hardness (Cl and BPh4 ) and understand the impact on the optical properties. The accuracy of the force field we use is verified by reproducing experimental crystal parameters as well as the configurations of polymethine/counterion complexes obtained from electronic-structure calculations. The aggregation characteristics can be understood in terms of both polymethinecounterion and polymethinepolymethine interactions. The counterions are found to localize near one end of the streptocyanine backbones, and the streptocyanines form a broad range of aggregates with significant electronic couplings between neighboring molecules. As a consequence, the linear and nonlinear optical properties are substantially modified in the bulk. By providing an understanding of the relationship between the molecular interactions and the bulk optical properties, our results point to a clear strategy for designing polymethine and counterion molecular structures and optimizing the materials properties for all-optical switching applications.

  13. Electrochemical and structural evaluation for bulk-type all-solid-state batteries using Li4GeS4-Li3PS4 electrolyte coating on LiCoO2 particles

    Science.gov (United States)

    Ito, Yusuke; Otoyama, Misae; Hayashi, Akitoshi; Ohtomo, Takamasa; Tatsumisago, Masahiro

    2017-08-01

    Bulk-type all-solid-state batteries, which use composite electrodes with a powder mixture of active materials and solid electrolytes, are anticipated for large-scale power sources. However, conventional powder mixing protocols are insufficient to maintain ion-conductive pathways within composite electrodes. Herein, sulfide electrolyte coatings have attracted attention as a promising means to overcome this difficulty. We assessed the effects of sulfide electrolyte coatings for active materials on the electrochemical properties and structural changes in all-solid-state cells. A favorable electrode-electrolyte interface was formed by coating significantly small amounts (ca. 3 wt%) of Li4GeS4-Li3PS4 solid electrolyte (SE) onto LiCoO2 particles via vapor phase process. The all-solid-state cell (In/Li2S-P2S5/SE-coated LiCoO2) was charged and discharged with a larger capacity than that using non-SE-coated LiCoO2 particles, indicating that the SE-coating is effective in forming a favorable ion-conductive pathway to LiCoO2 particles. Improvement of the cell performance after heat treatment was considered to derive not only from the enhancement of ionic conductivity in the SE-coating layer, but also from the reduction of voids in the composite electrode. Less ionic resistance and denser environment are beneficial for the Li-ion supply to the deepest part in the composite electrode, which results in more homogeneous electrochemical reaction in all-solid-state cells.

  14. Fabrication and characterization of oriented Nd2NiO4 bulk and cathode for low-temperature operating solid oxide fuel cell

    Science.gov (United States)

    Murata, Atsufumi; Uchikoshi, Tetsuo; Matsuda, Motohide

    2015-10-01

    Textured Nd2NiO4 (NNO) bulks were fabricated by slip casting in a 5 T magnetic field generated by a superconducting magnet. The easy-magnetization axis of NNO was determined by X-ray diffraction (XRD) measurements performed on the surfaces parallel and perpendicular to the applied magnetic field direction of the sintered bulk NNO ceramics. The anisotropic electric conductivity and thermal expansion coefficient of the textured NNO were characterized by the conventional DC four-terminal method and dilatometry, respectively. A higher electric conductivity and lower thermal expansion in the direction perpendicular to the c-axis were confirmed. Based on the obtained experimental data, fabrication of the a-b plane perpendicular-oriented NNO cathode layer on a Gd-doped ceria (GDC) electrolyte was finally attempted in a 0.9 T magnetic field generated by neodymium magnets. The effect of the rotation of the magnetic field in the horizontal plane on the orientation condition of the NNO layer was also investigated. The rotation of the magnetic field could produce the random orientation of the c-axis while retaining the a-b plane orientation against the electrolyte. Based on the performance tests of single cells equipped with different oriented NNO cathodes, the ideal situation of the NNO cathode layer leading to good performance is proposed.

  15. Handling sharps and needles

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000444.htm Handling sharps and needles To use the sharing features ... Health Administration. OSHA fact sheet: protecting yourself when handling contaminated sharps. Updated January 2011. Available at: www. ...

  16. Coarse-grained simulations for flow of complex soft matter fluids in the bulk and in the presence of solid interfaces

    Science.gov (United States)

    Ahuja, V. R.; van der Gucht, J.; Briels, W. J.

    2016-11-01

    We present a coarse-grained particle-based simulation technique for modeling flow of complex soft matter fluids such as polymer solutions in the presence of solid interfaces. In our coarse-grained description of the system, we track the motion of polymer molecules using their centers-of-mass as our coarse-grain co-ordinates and also keep track of another set of variables that describe the background flow field. The coarse-grain motion is thus influenced not only by the interactions based on appropriate potentials used to model the particular polymer system of interest and the random kicks associated with thermal fluctuations, but also by the motion of the background fluid. In order to couple the motion of the coarse-grain co-ordinates with the background fluid motion, we use a Galilean invariant, first order Brownian dynamics algorithm developed by Padding and Briels [J. Chem. Phys. 141, 244108 (2014)], which on the one hand draws inspiration from smoothed particle hydrodynamics in a way that the motion of the background fluid is efficiently calculated based on a discretization of the Navier-Stokes equation at the positions of the coarse-grain coordinates where it is actually needed, but also differs from it because of the inclusion of thermal fluctuations by having momentum-conserving pairwise stochastic updates. In this paper, we make a few modifications to this algorithm and introduce a new parameter, viz., a friction coefficient associated with the background fluid, and analyze the relationship of the model parameters with the dynamic properties of the system. We also test this algorithm for flow in the presence of solid interfaces to show that appropriate boundary conditions can be imposed at solid-fluid interfaces by using artificial particles embedded in the solid walls which offer friction to the real fluid particles in the vicinity of the wall. We have tested our method using a model system of a star polymer solution at the overlap concentration.

  17. Coarse-grained simulations for flow of complex soft matter fluids in the bulk and in the presence of solid interfaces.

    Science.gov (United States)

    Ahuja, V R; van der Gucht, J; Briels, W J

    2016-11-21

    We present a coarse-grained particle-based simulation technique for modeling flow of complex soft matter fluids such as polymer solutions in the presence of solid interfaces. In our coarse-grained description of the system, we track the motion of polymer molecules using their centers-of-mass as our coarse-grain co-ordinates and also keep track of another set of variables that describe the background flow field. The coarse-grain motion is thus influenced not only by the interactions based on appropriate potentials used to model the particular polymer system of interest and the random kicks associated with thermal fluctuations, but also by the motion of the background fluid. In order to couple the motion of the coarse-grain co-ordinates with the background fluid motion, we use a Galilean invariant, first order Brownian dynamics algorithm developed by Padding and Briels [J. Chem. Phys. 141, 244108 (2014)], which on the one hand draws inspiration from smoothed particle hydrodynamics in a way that the motion of the background fluid is efficiently calculated based on a discretization of the Navier-Stokes equation at the positions of the coarse-grain coordinates where it is actually needed, but also differs from it because of the inclusion of thermal fluctuations by having momentum-conserving pairwise stochastic updates. In this paper, we make a few modifications to this algorithm and introduce a new parameter, viz., a friction coefficient associated with the background fluid, and analyze the relationship of the model parameters with the dynamic properties of the system. We also test this algorithm for flow in the presence of solid interfaces to show that appropriate boundary conditions can be imposed at solid-fluid interfaces by using artificial particles embedded in the solid walls which offer friction to the real fluid particles in the vicinity of the wall. We have tested our method using a model system of a star polymer solution at the overlap concentration.

  18. Thorium utilization program. Quarterly progress report for the period ending November 30, 1975. [Fuel element crushing, solids handling, fluidized bed combustion, aqueous separations, solvent extraction, systems design and drafting, alternative head-end reprocessing, and fuel recycle systems analysis

    Energy Technology Data Exchange (ETDEWEB)

    1975-12-31

    The development program for HTGR fuel reprocessing continues to emphasize the design and construction of a prototype head-end line. Design work on the multistage crushing system, the primary and secondary fluidized bed burners, the pneumatic transfer systems, and the ancillary fixtures for semiremote assembly and disassembly is essentially complete. Fabrication and receipt of all major components is under way, and auxiliary instrumentation and support systems are being installed. Studies of flow characteristics of granular solids in pneumatic transfer systems are continuing and data are being collected for use in design of systems for solids handling. Experimental work on the 20-cm primary fluidized bed burner verified the fines recycle operating mode in runs of greater than 24 hr. Twelve leaching runs were performed during the quarter using crushed, burned-back TRISO coated ThC/sub 2/ particles and burned-back BISO coated sol gel ThO/sub 2/ particles to examine the effect of varying the Thorex-to-thoria ratio to give product solutions ranging from 0.25M to 1M in thorium. Only minor effects were observed and reference values for facility operations were specified. Two-stage leaching runs with burned-back ThC/sub 2/ indicate there are no measurable differences in total dissolution time as compared to single-stage leaching. Bench-scale tests on oxidation of HTGR fuel boron carbide at 900/sup 0/C indicates that most if not all of the carbide will be converted to boron oxide in the fluidized bed burner. Eight solvent extraction runs were completed during the quarter. These runs represented the first cycle and second uranium cycle of the acid-Thorex flowsheet. A detailed calculation of spent fuel compositions by fuel block and particle type is being performed for better definition of process streams in a fuel reprocessing facility.

  19. Bulk Stable Isotope Analysis of Carbon from Solids and Liquids using an Elemental Analyzer Coupled to a Wavelength-Scanned Cavity Ring-Down Spectrophotometer

    Science.gov (United States)

    Saad, N.; Rella, C.; van Pelt, A.

    2009-04-01

    We report here on the novel employment of a small footprint Wavelength-Scanned Cavity Ring-Down Spectrometer (WS-CRDS) interfaced to an elemental analyzer for the measurement of the bulk isotopic carbon signature in plants and food products. The current system provides an inexpensive alternative with unparalleled ease-of-use as compared to standard methods using the more complex analytical instrumentation of isotope ratio mass spectrometry. A precision of carbon isotopic ratio measurements of less than 1 permil was achieved in minutes of measurement time. Such precision readily distinguishes the isotopic carbon signatures of a variety of environmental and agricultural products from different origins, providing information about food authenticity and climate changes effect on plant physiology.

  20. 46 CFR 151.25-2 - Cargo handling space.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo handling space. 151.25-2 Section 151.25-2 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Environmental Control § 151.25-2 Cargo handling space. Pump rooms, compressor rooms, refrigeration rooms, heating rooms, instrument rooms or other closed...

  1. Bulk-Type All-Solid-State Lithium-Ion Batteries: Remarkable Performances of a Carbon Nanofiber-Supported MgH2 Composite Electrode.

    Science.gov (United States)

    Zeng, Liang; Ichikawa, Takayuki; Kawahito, Koji; Miyaoka, Hiroki; Kojima, Yoshitsugu

    2017-01-25

    Magnesium hydride, MgH2, a recently developed compound for lithium-ion batteries, is considered to be a promising conversion-type negative electrode material due to its high theoretical lithium storage capacity of over 2000 mA h g(-1), suitable working potential, and relatively small volume expansion. Nevertheless, it suffers from unsatisfactory cyclability, poor reversibility, and slow kinetics in conventional nonaqueous electrolyte systems, which greatly limit the practical application of MgH2. In this work, a vapor-grown carbon nanofiber was used to enhance the electrical conductivity of MgH2 using LiBH4 as the solid-state electrolyte. It shows that a reversible capacity of over 1200 mA h g(-1) with an average voltage of 0.5 V (vs Li/Li(+)) can be obtained after 50 cycles at a current density of 1000 mA g(-1). In addition, the capacity of MgH2 retains over 1100 mA h g(-1) at a high current density of 8000 mA g(-1), which indicates the possibility of using MgH2 as a negative electrode material for high power and high capacity lithium-ion batteries in future practical applications. Moreover, the widely studied sulfide-based solid electrolyte was also used to assemble battery cells with MgH2 electrode in the same system, and the electrochemical performance was as good as that using LiBH4 electrolyte.

  2. Human Factor Considered Safety Management of Maritime Transportation of Solid Bulk Concentrate%基于“人”的因素的海上运输易流态精选矿的安全管理

    Institute of Scientific and Technical Information of China (English)

    缪克银

    2012-01-01

    从介绍易流态精选矿的特性出发,深层次分析运输精选矿的风险致因,指出“人”的因素是所有事故原因中的主因,并具体提出保障易流态精选矿运输安全的管理措施.%Starting with an introduction of the property of solid bulk concentrate, we analyzed in—depth the causes of risks in its maritime transportation, pointed out that "human was the main factor in almost all the accidents discussed and finally proposed its safety management measures.

  3. Characterization of cohesive powders for bulk handling and DEM modelling

    NARCIS (Netherlands)

    Thakur, S.C.; Imole, Olukayode Isaiah; Wojtkowski, Mateusz Bronislaw; Magnanimo, Vanessa; Montes, E.C.; Ramaioli, Marco; Ahmadian, H.; Ooi, J.Y.; Bischoff, M.; Ramm, E.; Onate, E; Owen, R.; Wriggers, P.

    2013-01-01

    The flow behaviour of granular materials is relevant for many industrial applications including the pharmaceutical, chemical, consumer goods and food industries. A key issue is the accurate characterisation of these powders under different loading conditions and flow regimes, for example in mixers,

  4. Early diagenesis of mangrove leaves in a tropical estuary: Bulk chemical characterization using solid-state 13C NMR and elemental analyses

    Science.gov (United States)

    Benner, R.; Hatcher, P.G.; Hedges, J.I.

    1990-01-01

    Changes in the chemical composition of mangrove (Rhizophora mangle) leaves during decomposition in tropical estuarine waters were characterized using solid-state 13C nuclear magnetic resonance (NMR) and elemental (CHNO) analysis. Carbohydrates were the most abundant components of the leaves accounting for about 50 wt% of senescent tissues. Tannins were estimated to account for about 20 wt% of leaf tissues, and lipid components, cutin, and possibly other aliphatic biopolymers in leaf cuticles accounted for about 15 wt%. Carbohydrates were generally less resistant to decomposition than the other constituents and decreased in relative concentration during decomposition. Tannins were of intermediate resistance to decomposition and remained in fairly constant proportion during decomposition. Paraffinic components were very resistant to decomposition and increased in relative concentration as decomposition progressed. Lignin was a minor component of all leaf tissues. Standard methods for the colorimetric determination of tannins (Folin-Dennis reagent) and the gravimetric determination of lignin (Klason lignin) were highly inaccurate when applied to mangrove leaves. The N content of the leaves was particularly dynamic with values ranging from 1.27 wt% in green leaves to 0.65 wt% in senescent yellow leaves attached to trees. During decomposition in the water the N content initially decreased to 0.51 wt% due to leaching, but values steadily increased thereafter to 1.07 wt% in the most degraded leaf samples. The absolute mass of N in the leaves increased during decomposition indicating that N immobilization was occurring as decomposition progressed. ?? 1990.

  5. Robust ASPNET Exception Handling

    CERN Document Server

    Dumond, Lee

    2009-01-01

    This Wrox Blox will teach you how to unravel the mysteries of exception handling in ASP.NET.   First, you'll get a thorough introduction to structured exception handling in the .NET Framework, learn about the Exception class, the related C# language constructs, and how exceptions propagate up the call stack. Then, you'll delve into a variety of practical topics such as: when, where, and how to properly throw, catch, and handle exceptions in your code; how to employ "defensive programming" techniques to avoid triggering the most common CLR exceptions; adopting exception handling "best practices

  6. Non-monotonic compositional dependence of isothermal bulk modulus of the (Mg1–xMnxCr2O4 spinel solid solutions, and its origin and implication

    Directory of Open Access Journals (Sweden)

    Xi Liu

    2016-12-01

    Full Text Available The compressibility of the spinel solid solutions, (Mg1−xMnxCr2O4 with x = 0.00 (0, 0.20 (0, 0.44 (2, 0.61 (2, 0.77 (2 and 1.00 (0, has been investigated by using a diamond-anvil cell coupled with synchrotron X-ray radiation up to ∼10 GPa (ambient T. The second-order Birch–Murnaghan equation of state was used to fit the PV data, yielding the following values for the isothermal bulk moduli (KT, 198.2 (36, 187.8 (87, 176.1 (32, 168.7 (52, 192.9 (61 and 199.2 (61 GPa, for the spinel solid solutions with x = 0.00 (0, 0.20 (0, 0.44 (2, 0.61 (2, 0.77 (2 and 1.00 (0, respectively (KT′ fixed as 4. The KT value of the MgCr2O4 spinel is in good agreement with existing experimental determinations and theoretical calculations. The correlation between the KT and x is not monotonic, with the KT values similar at both ends of the binary MgCr2O4MnCr2O4, but decreasing towards the middle. This non-monotonic correlation can be described by two equations, KT = −49.2 (11x + 198.0 (4 (x ≤ ∼0.6 and KT = 92 (41x + 115 (30 (x ≥ ∼0.6, and can be explained by the evolution of the average bond lengths of the tetrahedra and octahedra of the spinel solid solutions. Additionally, the relationship between the thermal expansion coefficient and composition is correspondingly reinterpreted, the continuous deformation of the oxygen array is demonstrated, and the evolution of the component polyhedra is discussed for this series of spinel solid solutions. Our results suggest that the correlation between the KT and composition of a solid solution series may be complicated, and great care should be paid while estimating the KT of some intermediate compositions from the KT of the end-members.

  7. Socialanalyse og handling

    DEFF Research Database (Denmark)

    Henriksen, Kirsten; Alminde, Rikke; Stevnsgaard Andersen, Mona

    Social analyse og handling er et redskab beregnet til at inspirere socialarbejdere til at arbejde analytisk, systematisk samt refleksivt med konkrete problemstillinger i socialt arbejde.......Social analyse og handling er et redskab beregnet til at inspirere socialarbejdere til at arbejde analytisk, systematisk samt refleksivt med konkrete problemstillinger i socialt arbejde....

  8. Practices of Handling

    DEFF Research Database (Denmark)

    Ræbild, Ulla

    area within fashion research. This paper proposes an understanding of the work process of fashion designers as practices of handling comprising a number of embodied methodologies tied to both spatial and temporal dimensions. The term handling encompasses four meanings. As a verb it is literally...... to touch, pick up, carry, or feel with the hands. Figuratively it is to manage, deal with, direct, train, or control. Additionally, as a noun, a handle is something by which we grasp or open up something. Lastly, handle also has a Nordic root, here meaning to trade, bargain or deal. Together all four...... meanings seem to merge in the fashion design process, thus opening up for an embodied engagement with matter that entails direction giving, organizational management and negotiation. By seeing processes of handling as a key fashion methodological practice, it is possible to divert the discourse away from...

  9. CHR -- Character Handling Routines

    Science.gov (United States)

    Charles, A. C.; Rees, P. C. T.; Chipperfield, A. J.; Jenness, T.

    This document describes the Character Handling Routine library, CHR, and its use. The CHR library augments the limited character handling facilities provided by the Fortran 77 standard. It offers a range of character handling facilities: from formatting Fortran data types into text strings and the reverse, to higher level functions such as wild card matching, string sorting, paragraph reformatting and justification. The library may be used simply for building text strings for interactive applications or as a basis for more complex text processing applications.

  10. Amorphous LiCoO2sbnd Li2SO4 active materials: Potential positive electrodes for bulk-type all-oxide solid-state lithium batteries with high energy density

    Science.gov (United States)

    Nagao, Kenji; Hayashi, Akitoshi; Deguchi, Minako; Tsukasaki, Hirofumi; Mori, Shigeo; Tatsumisago, Masahiro

    2017-04-01

    Newly amorphous Li2-x/100Cox/100S1-x/100O4-x/50 (xLiCoO2·(100-x)Li2SO4 (mol%)) positive electrode active materials are synthesized using mechanochemical techniques. SEM observation indicates that average radii of the Li1.2Co0.8S0.2O2.4 (80LiCoO2·20Li2SO4 (mol%)) particles are about 3 μm. HR-TEM images indicate that the particles comprise nano-crystalline and amorphous phases. The crystalline phase is attributable to cubic LiCoO2 phase. These active materials exhibit a high electronic conductivity of around 10-5-10-1 S cm-1 and an ionic conductivity of around 10-7-10-6 S cm-1 at room temperature. Bulk-type all-oxide solid-state cells (Lisbnd In alloy/Li3BO3-based glass-ceramic electrolyte/amorphous Li2-x/100Cox/100S1-x/100O4-x/50) are fabricated by pressing at room temperature without high temperature sintering. Although the cell with the milled LiCoO2 shows no capacity, the cell using the Li1.2Co0.8S0.2O2.4 electrode with no conductive components (ca. 150 μm thickness) operates as a secondary battery at 100 °C, with an average discharge potential of 3.3 V (vs. Li+/Li) and discharge capacity of 163 mAh g-1. A positive electrode with large amounts of active materials is suitable for achieving high energy density in all-solid-state batteries. These newly synthesized amorphous Li2-x/100Cox/100S1-x/100O4-x/50 electrodes with ionic and electronic conductivities and good processability meet that demand.

  11. Helping Kids Handle Worry

    Science.gov (United States)

    ... Child What Kids Say About: Handling Stress Anxiety, Fears, and Phobias Community Service: A Family's Guide to Getting Involved ... With Stress Teens Talk About Stress (Video) Anxiety, Fears, and Phobias Childhood Stress How Can I Help My Child ...

  12. Handling Pyrophoric Reagents

    Energy Technology Data Exchange (ETDEWEB)

    Alnajjar, Mikhail S.; Haynie, Todd O.

    2009-08-14

    Pyrophoric reagents are extremely hazardous. Special handling techniques are required to prevent contact with air and the resulting fire. This document provides several methods for working with pyrophoric reagents outside of an inert atmosphere.

  13. TRANSPORT/HANDLING REQUESTS

    CERN Multimedia

    Groupe ST/HM

    2002-01-01

    A new EDH document entitled 'Transport/Handling Request' will be in operation as of Monday, 11th February 2002, when the corresponding icon will be accessible from the EDH desktop, together with the application instructions. This EDH form will replace the paper-format transport/handling request form for all activities involving the transport of equipment and materials. However, the paper form will still be used for all vehicle-hire requests. The introduction of the EDH transport/handling request form is accompanied by the establishment of the following time limits for the various services concerned: 24 hours for the removal of office items, 48 hours for the transport of heavy items (of up to 6 metric tons and of standard road width), 5 working days for a crane operation, extra-heavy transport operation or complete removal, 5 working days for all transport operations relating to LHC installation. ST/HM Group, Logistics Section Tel: 72672 - 72202

  14. Investigation into the Flow Properties of Coarse Solid Fuels for Use in Industrial Feed Systems

    Directory of Open Access Journals (Sweden)

    James M. Craven

    2015-01-01

    Full Text Available Material feeding and handling systems have been cited as one of the most common causes of process downtime where thermochemical conversion processes are concerned. New and emerging fuels come in a variety of forms, and if such fuels are to be deployed widely it is imperative that material feeding and handling systems are designed appropriately. This study proposes an approach for designing material feeding and handling systems for use with coarse solid fuels. The data obtained from this study indicates particle size to be one of the key issues affecting the flowability of bulk solids further to the uniformity in particle shape. Coarse bulk solid samples were shown to flow more freely than their milled and pulverised counterparts, generating higher degrees of flowability. The results from this study were also applied to a new feed system used for feeding solid fuels to high pressure processes named the Hydraulic Lock Hopper. In this study the Hydraulic Lock Hopper demonstrated the feeding of wood pellets, torrefied spruce pellets, and ground anthracite coal grains against a pressure of 25 barg in two modes of operation. Energy savings compared to conventional lock hopper systems were recorded in the region of 80%.

  15. Colonic potassium handling

    DEFF Research Database (Denmark)

    Sørensen, Mads Vaarby; Matos, Joana E.; Prætorius, Helle

    2010-01-01

    Homeostatic control of plasma K+ is a necessary physiological function. The daily dietary K+ intake of approximately 100 mmol is excreted predominantly by the distal tubules of the kidney. About 10% of the ingested K+ is excreted via the intestine. K+ handling in both organs is specifically...

  16. Improving coal handling effectiveness

    Energy Technology Data Exchange (ETDEWEB)

    Walker, S.

    2003-10-01

    Appropriate coal handling systems are essential for successful coal utilisation. The paper looks at some of the options available, including crushers and hammer mills, wear-resistant liners for chutes and wagons, and dewatering systems. These are individual components within larger systems such as stockyard stacking and reclaiming installations. 5 photos.

  17. Uranium hexafluoride handling. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    The United States Department of Energy, Oak Ridge Field Office, and Martin Marietta Energy Systems, Inc., are co-sponsoring this Second International Conference on Uranium Hexafluoride Handling. The conference is offered as a forum for the exchange of information and concepts regarding the technical and regulatory issues and the safety aspects which relate to the handling of uranium hexafluoride. Through the papers presented here, we attempt not only to share technological advances and lessons learned, but also to demonstrate that we are concerned about the health and safety of our workers and the public, and are good stewards of the environment in which we all work and live. These proceedings are a compilation of the work of many experts in that phase of world-wide industry which comprises the nuclear fuel cycle. Their experience spans the entire range over which uranium hexafluoride is involved in the fuel cycle, from the production of UF{sub 6} from the naturally-occurring oxide to its re-conversion to oxide for reactor fuels. The papers furnish insights into the chemical, physical, and nuclear properties of uranium hexafluoride as they influence its transport, storage, and the design and operation of plant-scale facilities for production, processing, and conversion to oxide. The papers demonstrate, in an industry often cited for its excellent safety record, continuing efforts to further improve safety in all areas of handling uranium hexafluoride. Selected papers were processed separately for inclusion in the Energy Science and Technology Database.

  18. Gases, liquids and solids

    CERN Document Server

    Tabor, David

    1969-01-01

    It has been tradional to treat gases, liquids and solids as if they were completely unrelated material. However, this book shows that many of their bulk properties can been explained in terms of intermolecular forces.

  19. Polymer-fullerene bulk heterojunction solar cells

    NARCIS (Netherlands)

    Janssen, RAJ; Hummelen, JC; Saricifti, NS

    2005-01-01

    Nanostructured phase-separated blends, or bulk heterojunctions, of conjugated Polymers and fullerene derivatives form a very attractive approach to large-area, solid-state organic solar cells.The key feature of these cells is that they combine easy, processing from solution on a variety of substrate

  20. Basics for Handling Food Safely

    Science.gov (United States)

    ... o a rm ct a s tion Basics for Handling Food Safely Safe steps in food handling, cooking, and storage are essential to prevent foodborne ... and soap for 20 seconds before and after handling food. · Don’t cross-contaminate. Keep raw meat, ...

  1. Students' Strategies for Exception Handling

    Science.gov (United States)

    Rashkovits, Rami; Lavy, Ilana

    2011-01-01

    This study discusses and presents various strategies employed by novice programmers concerning exception handling. The main contributions of this paper are as follows: we provide an analysis tool to measure the level of assimilation of exception handling mechanism; we present and analyse strategies to handle exceptions; we present and analyse…

  2. Packaged bulk micromachined triglyceride biosensor

    Science.gov (United States)

    Mohanasundaram, S. V.; Mercy, S.; Harikrishna, P. V.; Rani, Kailash; Bhattacharya, Enakshi; Chadha, Anju

    2010-02-01

    Estimation of triglyceride concentration is important for the health and food industries. Use of solid state biosensors like Electrolyte Insulator Semiconductor Capacitors (EISCAP) ensures ease in operation with good accuracy and sensitivity when compared to conventional sensors. In this paper we report on packaging of miniaturized EISCAP sensors on silicon. The packaging involves glass to silicon bonding using adhesive. Since this kind of packaging is done at room temperature, it cannot damage the thin dielectric layers on the silicon wafer unlike the high temperature anodic bonding technique and can be used for sensors with immobilized enzyme without denaturing the enzyme. The packaging also involves a teflon capping arrangement which helps in easy handling of the bio-analyte solutions. The capping solves two problems. Firstly, it helps in the immobilization process where it ensures the enzyme immobilization happens only on one pit and secondly it helps with easy transport of the bio-analyte into the sensor pit for measurements.

  3. Large area bulk superconductors

    Science.gov (United States)

    Miller, Dean J.; Field, Michael B.

    2002-01-01

    A bulk superconductor having a thickness of not less than about 100 microns is carried by a polycrystalline textured substrate having misorientation angles at the surface thereof not greater than about 15.degree.; the bulk superconductor may have a thickness of not less than about 100 microns and a surface area of not less than about 50 cm.sup.2. The textured substrate may have a thickness not less than about 10 microns and misorientation angles at the surface thereof not greater than about 15.degree.. Also disclosed is a process of manufacturing the bulk superconductor and the polycrystalline biaxially textured substrate material.

  4. New transport and handling contract

    CERN Multimedia

    SC Department

    2008-01-01

    A new transport and handling contract entered into force on 1.10.2008. As with the previous contract, the user interface is the internal transport/handling request form on EDH: https://edh.cern.ch/Document/TransportRequest/ To ensure that you receive the best possible service, we invite you to complete the various fields as accurately as possible and to include a mobile telephone number on which we can reach you. You can follow the progress of your request (schedule, completion) in the EDH request routing information. We remind you that the following deadlines apply: 48 hours for the transport of heavy goods (up to 8 tonnes) or simple handling operations 5 working days for crane operations, transport of extra-heavy goods, complex handling operations and combined transport and handling operations in the tunnel. For all enquiries, the number to contact remains unchanged: 72202. Heavy Handling Section TS-HE-HH 72672 - 160319

  5. Application of the penetration theory for gas - Liquid mass transfer without liquid bulk : Differences with system with a bulk

    NARCIS (Netherlands)

    van Elk, E. P.; Knaap, M. C.; Versteeg, G. F.

    2007-01-01

    Frequently applied micro models for gas-liquid mass transfer all assume the presence of a liquid bulk. However, some systems are characterized by the absence of a liquid bulk, a very thin layer of liquid flows over a solid surface. An example of such a process is absorption in a column equipped with

  6. Trends in Modern Exception Handling

    Directory of Open Access Journals (Sweden)

    Marcin Kuta

    2003-01-01

    Full Text Available Exception handling is nowadays a necessary component of error proof information systems. The paper presents overview of techniques and models of exception handling, problems connected with them and potential solutions. The aspects of implementation of propagation mechanisms and exception handling, their effect on semantics and general program efficiency are also taken into account. Presented mechanisms were adopted to modern programming languages. Considering design area, formal methods and formal verification of program properties we can notice exception handling mechanisms are weakly present what makes a field for future research.

  7. REMOTE HANDLING ARRANGEMENTS

    Science.gov (United States)

    Ginns, D.W.

    1958-04-01

    A means for handling remotely a sample pellet to be irradiated in a nuclear reactor is proposed. It is comprised essentially of an inlet tube extending through the outer shield of the reactor and being inclined so that its outer end is at a higher elevation than its inner end, an outlet tube extending through the outer shield being inclined so that its inner end is at a higher elevation than its outer end, the inner ends of these two tubes being interconnected, and a straight tube extending through the outer shield and into the reactor core between the inlet and outlet tubes and passing through the juncture of said inner ends. A rod-like member is rotatably and slidely operated within the central straight tube and has a receptacle on its inner end for receiving a sample pellet from the inlet tube. The rod member is operated to pick up a sample pellet from the inlet tube, carry the sample pellet into the irradiating position within the core, and return to the receiving position where it is rotated to dump the irradiated pellet into the outlet tube by which it is conveyed by gravity to the outside of the reactor. Stop members are provided in the inlet tube, and electrical operating devices are provided to control the sequence of the operation automatically.

  8. Tuneable film bulk acoustic wave resonators

    CERN Document Server

    Gevorgian, Spartak Sh; Vorobiev, Andrei K

    2013-01-01

    To handle many standards and ever increasing bandwidth requirements, large number of filters and switches are used in transceivers of modern wireless communications systems. It makes the cost, performance, form factor, and power consumption of these systems, including cellular phones, critical issues. At present, the fixed frequency filter banks based on Film Bulk Acoustic Resonators (FBAR) are regarded as one of the most promising technologies to address performance -form factor-cost issues. Even though the FBARs improve the overall performances the complexity of these systems remains high.  Attempts are being made to exclude some of the filters by bringing the digital signal processing (including channel selection) as close to the antennas as possible. However handling the increased interference levels is unrealistic for low-cost battery operated radios. Replacing fixed frequency filter banks by one tuneable filter is the most desired and widely considered scenario. As an example, development of the softwa...

  9. Ion conduction in crystalline superionic solids and its applications

    Science.gov (United States)

    Chandra, Angesh

    2014-06-01

    Superionic solids an area of multidisciplinary research activity, incorporates to study the physical, chemical and technological aspects of rapid ion movements within the bulk of the special class of ionic materials. It is an emerging area of materials science, as these solids show tremendous technological scopes to develop wide variety of solid state electrochemical devices such as batteries, fuel cells, supercapacitors, sensors, electrochromic displays (ECDs), memories, etc. These devices have wide range of applicabilities viz. power sources for IC microchips to transport vehicles, novel sensors for controlling atmospheric pollution, new kind of memories for computers, smart windows/display panels, etc. The field grew with a rapid pace since then, especially with regards to designing new materials as well as to explore their device potentialities. Amongst the known superionic solids, fast Ag+ ion conducting crystalline solid electrolytes are attracted special attention due to their relatively higher room temperature conductivity as well as ease of materials handling/synthesis. Ion conduction in these electrolytes is very much interesting part of today. In the present review article, the ion conducting phenomenon and some device applications of crystalline/polycrystalline superionic solid electrolytes have been reviewed in brief. Synthesis and characterization tools have also been discussed in the present review article.

  10. Parallel Handling of Integrity Constraints

    NARCIS (Netherlands)

    Grefen, P.W.P.J.; Flokstra, Jan; Apers, Peter M.G.

    1990-01-01

    Integrity constraints form an important part of a data model. Therefore, a complete integrity constraint handling subsystem is considered an important part of any modern DBMS. In implementing an integrity constraint handling subsystem, there are two major problem areas: providing enough functionalit

  11. Assessment of Issue Handling Efficiency

    NARCIS (Netherlands)

    Luijten, B.; Visser, J.; Zaidman, A.

    2013-01-01

    We mined the issue database of GNOME to assess how issues are handled. How many issues are submitted and resolved? Does the backlog grow or decrease? How fast are issues resolved? Does issue resolution speed increase or decrease over time? In which subproject are issues handled most efficiently? To

  12. Assessment of Issue Handling Efficiency

    NARCIS (Netherlands)

    Luijten, B.; Visser, J.; Zaidman, A.

    2013-01-01

    We mined the issue database of GNOME to assess how issues are handled. How many issues are submitted and resolved? Does the backlog grow or decrease? How fast are issues resolved? Does issue resolution speed increase or decrease over time? In which subproject are issues handled most efficiently? To

  13. Domestic Refuse Handling Practices Among Adult Females in a ...

    African Journals Online (AJOL)

    It was an interventional/community-based study involving a total of 436 adult ... Health education was given on domestic refuse handling and reinforcement by ... to the various challenges faced by them particularly the absence of community sanitation members. ... Key words: Solid waste, practices, female adults, obstacles.

  14. A Review of Screw Conveyors Performance Evaluation During Handling Process

    Directory of Open Access Journals (Sweden)

    Hemad Zareiforoush

    2010-04-01

    Full Text Available This paper reviews recent work on screw conveyors performance evaluation during handling process, especially in the case of agricultural grains and bulk materials. Experimental work has been mainly carried out to determine a range of parameters, such as auger dimension, screw rotational speed, screw clearance, conveyor intake length and conveying angle for horizontal, inclined and vertical screw conveyors. Several measurement techniques including theoretical models and DEM have been utilized to study the screw conveyors performance. However, each of these techniques is limited in its application. Difficulties in representing vortex motion and interactions among conveying grains and between the particles and screw rotating flight have so far limited the success of advanced modeling. Further work is needed to be conducted on screw augers performance to understand and improve the agricultural grains and bulk materials handling process.

  15. Bulk chemicals from biomass

    NARCIS (Netherlands)

    Haveren, van J.; Scott, E.L.; Sanders, J.P.M.

    2008-01-01

    Given the current robust forces driving sustainable production, and available biomass conversion technologies, biomass-based routes are expected to make a significant impact on the production of bulk chemicals within 10 years, and a huge impact within 20-30 years. In the Port of Rotterdam there is a

  16. Auctioning Bulk Mobile Messages

    NARCIS (Netherlands)

    S. Meij (Simon); L-F. Pau (Louis-François); H.W.G.M. van Heck (Eric)

    2003-01-01

    textabstractThe search for enablers of continued growth of SMS traffic, as well as the take-off of the more diversified MMS message contents, open up for enterprises the potential of bulk use of mobile messaging , instead of essentially one-by-one use. In parallel, such enterprises or value added

  17. Bulk chemicals from biomass

    NARCIS (Netherlands)

    Haveren, van J.; Scott, E.L.; Sanders, J.P.M.

    2008-01-01

    Given the current robust forces driving sustainable production, and available biomass conversion technologies, biomass-based routes are expected to make a significant impact on the production of bulk chemicals within 10 years, and a huge impact within 20-30 years. In the Port of Rotterdam there is a

  18. 49 CFR 176.74 - On deck stowage of break-bulk hazardous materials.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false On deck stowage of break-bulk hazardous materials... CARRIAGE BY VESSEL General Handling and Stowage § 176.74 On deck stowage of break-bulk hazardous materials... within a horizontal distance of 25 feet of an operating or embarkation point of a lifeboat. (g)...

  19. Lunar Materials Handling System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Lunar Materials Handling System (LMHS) is a method for transfer of lunar soil into and out of process equipment in support of in situ resource utilization...

  20. Tritium handling in vacuum systems

    Energy Technology Data Exchange (ETDEWEB)

    Gill, J.T. [Monsanto Research Corp., Miamisburg, OH (United States). Mound Facility; Coffin, D.O. [Los Alamos National Lab., NM (United States)

    1986-10-01

    This report provides a course in Tritium handling in vacuum systems. Topics presented are: Properties of Tritium; Tritium compatibility of materials; Tritium-compatible vacuum equipment; and Tritium waste treatment.

  1. Order Handling in Convergent Environments

    CERN Document Server

    Vrtanoski, Jordan

    2012-01-01

    The rapid development of IT&T technology had big impact on the traditional telecommunications market, transforming it from monopolistic market to highly competitive high-tech market where new services are required to be created frequently. This paper aims to describe a design approach that puts order management process (as part of enterprise application integration) in function of rapid service creation. In the text we will present a framework for collaborative order handling supporting convergent services. The design splits the order handling processes in convergent environments in three business process groups: order capture, order management and order fulfillment. The paper establishes abstract framework for order handling and provides design guidelines for transaction handling implementation based on the checkpoint and inverse command strategy. The proposed design approach is based in a convergent telecommunication environment. Same principles are applicable in solving problems of collaboration in fun...

  2. Towards integrated microliquid handling systems

    NARCIS (Netherlands)

    Elwenspoek, M.; Lammerink, T.S.J.; Miyake, R.; Fluitman, J.H.J.

    1994-01-01

    In this paper we describe components for integrated microliquid handling systems such as fluid injection analysis, and first results of planar integration of components. The components discussed are channels, passive and active valves, actuators for micropumps, micromixers, microflow sensors, optica

  3. Technologies and logistics for handling, transport and distribution of animal manures

    Science.gov (United States)

    Organizing and managing the whole manure handling chain from the animal house through transport to the point of use (e.g. in the field) is a challenging task requiring consideration of manure type and operating conditions. Solid and liquid manure must be handled differently, using very different tec...

  4. Grain Handling and Storage Safety

    OpenAIRE

    Webster, Jill, Ph.D.

    2005-01-01

    Agricultural Health and Safety Fact Sheet AHS-02 Grain Handling and Storage Safety Jill Webster Ph.D., S. Christian Mariger, Graduate Assistant Agricultural Systems Technology and Education There are several hazards that should be considered when working with grain. Storage structures, handling equipment, and the grain itself have all caused serious injuries and deaths. Storage structures (bins, silos, and granaries), like all confined spaces, have significant hazards associated with them. Be...

  5. Civilsamfundets ABC: H for Handling

    DEFF Research Database (Denmark)

    Lund, Anker Brink; Meyer, Gitte

    2015-01-01

    Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling.......Hvad er civilsamfundet? Anker Brink Lund og Gitte Meyer fra CBS Center for Civil Society Studies gennemgår civilsamfundet bogstav for bogstav. Vi er nået til H for Handling....

  6. Radiative Bulk Viscosity

    CERN Document Server

    Chen, X

    2001-01-01

    Viscous resistance to changes in the volume of a gas arises when different degrees of freedom have different relaxation times. Collisions tend to oppose the resulting departures from equilibrium and, in so doing, generate entropy. Even for a classical gas of hard spheres, when the mean free paths or mean flight times of constituent particles are long, we find a nonvanishing bulk viscosity. Here we apply a method recently used to uncover this result for a classical rarefied gas to radiative transfer theory and derive an expression for the radiative stress tensor for a gray medium with absorption and Thomson scattering. We determine the transport coefficients through the calculation of the comoving entropy generation. When scattering dominates absorption, the bulk viscosity becomes much larger than either the shear viscosity or the thermal conductivity.

  7. Síndrome HaNDL / HaNDL Syndrome / Síndrome HaNDL

    Directory of Open Access Journals (Sweden)

    Camilo Ernesto Barros-Gutiérrez, MD., Esp.

    2015-03-01

    Full Text Available Introducción: El Síndrome HaNDL (Headache and neurologic deficits with cerebroespinal fluid lymphocytosis por sus siglas en inglés, es una patología que cursa con cefalea, focalización neurológica y linfocitosis en el líquido cefalorraquídeo. Objetivo: este artículo busca presentar un caso de Síndrome de HaNDL, puesto que esta condición nosológica implica un reto diagnóstico. Resultados y conclusiones: Se presenta el caso de un paciente con diagnóstico de síndrome de HaNDL los hallazgos al examen físico y del líquido cefalorraquídeo. [Barros-Gutiérrez CE, Silva-Monsalve E, Gualtero-Trujillo S. Síndrome HaNDL. MedUNAB 2015; 17(3: xx-xx]. Introduction: The syndrome of transient Headache and Neurological Deficits with cerebrospinal fluid Lymphocytosis, is a pathology that presents cephalalgia, neurological focalization and lymphocytes in the cerebrospinal fluid. Objective: This article presents a HaNDL Syndrome case, since this nosological condition implies a diagnostic challenge. Results and conclusions: A case of a patient with HaNDL syndrome diagnosis, physical examination findings and cerebrospinal fluid are presented. [Barros-Gutiérrez CE, Silva-Monsalve E, Gualtero-Trujillo S. HaNDL Syndrome. MedUNAB 2015; 17(3: xx-xx]. Introdução: A síndrome de HaNDL (Headache and neurologic déficits with cerebrospinal fluid lymphocytosis por sua sigla em inglês é uma doença que causa dor de cabeça, foco neurológico e linfocitose no líquido cefalorraquidiano. Objetivo: Este artigo tem como objetivo apresentar um caso de Síndrome de HaNDL, uma vez que esta condição nosológica envolve um desafio diagnóstico. Resultados e conclusões: Apresenta-se o caso de um paciente diagnosticado com a síndrome de HaNDL, o encontrado no exame físico e o líquido cefalorraquidiano. [Barros-Gutiérrez CE, Silva-Monsalve E, Gualtero-Trujillo S. Síndrome HaNDL. MedUNAB 2015; 17(3: xx-xx].

  8. 33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Science.gov (United States)

    2010-07-01

    ... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Oil Facilities § 154.1047 Response plan development and evaluation criteria for facilities that handle, store, or...

  9. Tool handling robot system; Tool handling robot system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-10

    As an example of the delivery of industrial use automation equipment by Meidensha Corp., the paper introduced a tool handling robot system. The system is a tool handling robot of case processing use FMS (flexible manufacturing system). This is a system which exchanges tool automatically according to the From To order from the managing computer using the ceiling running robot between five horizontal type machining centers and more than 800 collective tool stockers. The structure of the system is as follows: tool handling robot (MHR-400), robot controller (meirocs-F), tool hand, robot running unit, tool stocker (for 844 tools), five life tool exchange trucks, tool truck lifting unit, system control panel. (NEDO)

  10. Solid Waste Land Applications with Permits by the Iowa DNR

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — All types of facilities that handle solid waste, including: sanitary landfills, appliance demanufacturing facilities, transfer stations, land application sites,...

  11. Solid Waste Management Facilities with Permits by the Iowa DNR

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — All types of facilities that handle solid waste, including: sanitary landfills, appliance demanufacturing facilities, transfer stations, land application sites,...

  12. Particles, contacts, bulk behavior

    NARCIS (Netherlands)

    Luding, Stefan; Tomas, J.

    2014-01-01

    Granular matter consists of discrete “particles”. These can be separate sand-grains, agglomerates (made of many primary particles), or solid materials like rock, composites, or metal-alloys—all with particulate inhomogeneous, possibly anisotropic micro-structure. Particles can be as small as

  13. U.S. Department of Energy, National Energy Technology Laboratory Solid-State Lighting Core Technologies Light Emitting Diodes on Semipolar Bulk GaN Substrate with IQE > 80% at 150 A/cm2 and 100 0C

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Arpan [Soraa, Inc., Fremont, CA (United States); David, Aurelien [Soraa, Inc., Fremont, CA (United States); Grundmann, Michael [Soraa, Inc., Fremont, CA (United States); Tyagi, Anurag [Soraa, Inc., Fremont, CA (United States); Craven, Michael [Soraa, Inc., Fremont, CA (United States); Hurni, Christophe [Soraa, Inc., Fremont, CA (United States); Cich, Michael [Soraa, Inc., Fremont, CA (United States)

    2015-03-31

    GaN is a crucial material for light-emitting diodes (LEDs) emitting in the violet-to-green range. Despite its good performance, it still suffers from significant technical limitations. In particular, the efficiency of GaN-based LEDs decreases at high current (“current droop”) and high temperature (“temperature droop”). This is problematic in some lighting applications, where a high-power operation is required. This program studied the use of particular substrates to improve the efficiency of GaN-based LEDs: bulk semipolar (SP) GaN substrates. These substrates possess a very high material quality, and physical properties which are distinctly different from legacy substrates currently used in the LED industry. The program focused on the development of accurate metrology to quantify the performance of GaN-based LEDs, and on improvement to LED quality and design on SP substrates. Through a thorough optimization process, we demonstrated violet LEDs with very high internal quantum efficiency, exceeding 85% at high temperature and high current. We also investigated longer-wavelength blue emitters, but found that the limited strain budget was a key limitation.

  14. Compositional ordering and stability in nanostructured, bulk thermoelectric alloys.

    Energy Technology Data Exchange (ETDEWEB)

    Hekmaty, Michelle A.; Faleev, S.; Medlin, Douglas L.; Leonard, F.; Lensch-Falk, J.; Sharma, Peter Anand; Sugar, J. D.

    2009-09-01

    Thermoelectric materials have many applications in the conversion of thermal energy to electrical power and in solid-state cooling. One route to improving thermoelectric energy conversion efficiency in bulk material is to embed nanoscale inclusions. This report summarize key results from a recently completed LDRD project exploring the science underpinning the formation and stability of nanostructures in bulk thermoelectric and the quantitative relationships between such structures and thermoelectric properties.

  15. Værk som handling

    DEFF Research Database (Denmark)

    Jalving, Camilla

    Hvordan kan et kunstværk være en handling? Hvad er performativ billedkunst, og hvad menes der egentlig med ordet ´performativitet´? Det er nogle af de spørgsmål, bogen Værk som handling griber fat i. Mens performativitet i løbet af de sidste ti år er blevet et bredt anvendt begreb i kulturteorien...... mellem værket som objekt og som handling. Bogens værkanalyser orienterer sig derfor både mod, hvad kunstværket er, og hvordan det er: Hvordan virker det, hvordan stiller det sig frem, hvordan producerer det betydning, hvordan skaber det en situation, og ikke mindst hvordan interagerer det med betragteren?...

  16. The handling of chemical data

    CERN Document Server

    Lark, P D; Bosworth, R C L

    1968-01-01

    The Handling of Chemical Data deals with how measurements, such as those arrived at from chemical experimentation, are handled. The book discusses the different kinds of measurements and their specific dimensional characteristics by starting with the origin and presentation of chemical data. The text explains the units, fixed points, and relationships found between scales, the concept of dimensions, the presentation of quantitative data (whether in a tabular or graphical form), and some uses of empirical equations. The book also explains the relationship between two variables, and how equatio

  17. How Retailers Handle Complaint Management

    DEFF Research Database (Denmark)

    Hansen, Torben; Wilke, Ricky; Zaichkowsky, Judy

    2009-01-01

    as to the links between CM and redress of consumers’ complaints. The results suggest that retailers who attach large negative consequences to consumer dissatisfaction are more likely than other retailers to develop a positive strategic view on customer complaining, but at the same time an increase in perceived......This article fills a gap in the literature by providing insight about the handling of complaint management (CM) across a large cross section of retailers in the grocery, furniture, electronic and auto sectors. Determinants of retailers’ CM handling are investigated and insight is gained...... negative consequences of customer dissatisfaction leads to a more negative view on interacting with complaining customers....

  18. Assessment of bioburden encapsulated in bulk materials

    Science.gov (United States)

    Schubert, Wayne W.; Newlin, Laura; Chung, Shirley Y.; Ellyin, Raymond

    2016-05-01

    The National Aeronautics and Space Administration (NASA) imposes bioburden limitations on all spacecraft destined for solar system bodies that might harbor evidence of extant or extinct life. The subset of microorganisms trapped within solid materials during manufacture and assembly is referred to as encapsulated bioburden. In the absence of spacecraft-specific data, NASA relies on specification values to estimate total spacecraft encapsulated bioburden, typically 30 endospores/cm3 or 300 viable cells/cm3 in non-electronic materials. Specification values for endospores have been established conservatively, and represent no less than an order of magnitude greater abundance than that derived from empirical assessments of actual spacecraft materials. The goal of this study was to generate data germane to determining whether revised bulk encapsulated material values (lower than those estimated by historical specifications) tailored specifically to the materials designated in modern-day spacecraft design could be used, on a case-by-case basis, to comply with planetary protection requirements. Organic materials having distinctly different chemical properties and configurations were selected. This required more than one experimental and analytical approach. Filtration was employed for liquid electrolytes, lubricants were suspended in an aqueous solution and solids (wire and epoxy sealant) were cryogenically milled. The final data characteristic for all bioburden estimates was microbial colony formation in rich agar growth medium. To assess survival potential, three non-spore-forming bacterial cell lines were systematically encapsulated in an epoxy matrix, liberated via cryogenic grinding, and cultured. Results suggest that bulk solid materials harbor significantly fewer encapsulated microorganisms than are estimated by specification values. Lithium-ion battery electrolyte reagents housed fewer than 1 CFU/cm3. Results also demonstrated that non-spore-forming microorganisms

  19. Comparing near-infrared conventional diffuse reflectance spectroscopy and hyperspectral imaging for determination of the bulk properties of solid samples by multivariate regression: determination of Mooney viscosity and plasticity indices of natural rubber.

    Science.gov (United States)

    Juliano da Silva, Carlos; Pasquini, Celio

    2015-01-21

    Conventional reflectance spectroscopy (NIRS) and hyperspectral imaging (HI) in the near-infrared region (1000-2500 nm) are evaluated and compared, using, as the case study, the determination of relevant properties related to the quality of natural rubber. Mooney viscosity (MV) and plasticity indices (PI) (PI0 - original plasticity, PI30 - plasticity after accelerated aging, and PRI - the plasticity retention index after accelerated aging) of rubber were determined using multivariate regression models. Two hundred and eighty six samples of rubber were measured using conventional and hyperspectral near-infrared imaging reflectance instruments in the range of 1000-2500 nm. The sample set was split into regression (n = 191) and external validation (n = 95) sub-sets. Three instruments were employed for data acquisition: a line scanning hyperspectral camera and two conventional FT-NIR spectrometers. Sample heterogeneity was evaluated using hyperspectral images obtained with a resolution of 150 × 150 μm and principal component analysis. The probed sample area (5 cm(2); 24,000 pixels) to achieve representativeness was found to be equivalent to the average of 6 spectra for a 1 cm diameter probing circular window of one FT-NIR instrument. The other spectrophotometer can probe the whole sample in only one measurement. The results show that the rubber properties can be determined with very similar accuracy and precision by Partial Least Square (PLS) regression models regardless of whether HI-NIR or conventional FT-NIR produce the spectral datasets. The best Root Mean Square Errors of Prediction (RMSEPs) of external validation for MV, PI0, PI30, and PRI were 4.3, 1.8, 3.4, and 5.3%, respectively. Though the quantitative results provided by the three instruments can be considered equivalent, the hyperspectral imaging instrument presents a number of advantages, being about 6 times faster than conventional bulk spectrometers, producing robust spectral data by ensuring sample

  20. Dissolution of bulk specimens of silicon nitride

    Science.gov (United States)

    Davis, W. F.; Merkle, E. J.

    1981-01-01

    An accurate chemical characterization of silicon nitride has become important in connection with current efforts to incorporate components of this material into advanced heat engines. However, there are problems concerning a chemical analysis of bulk silicon nitride. Current analytical methods require the pulverization of bulk specimens. A pulverization procedure making use of grinding media, on the other hand, will introduce contaminants. A description is given of a dissolution procedure which overcomes these difficulties. It has been found that up to at least 0.6 g solid pieces of various samples of hot pressed and reaction bonded silicon nitride can be decomposed in a mixture of 3 mL hydrofluoric acid and 1 mL nitric acid overnight at 150 C in a Parr bomb. High-purity silicon nitride is completely soluble in nitric acid after treatment in the bomb. Following decomposition, silicon and hydrofluoric acid are volatilized and insoluble fluorides are converted to a soluble form.

  1. Bulk sound velocity of porous materials at high pressures

    Institute of Scientific and Technical Information of China (English)

    耿华运; 吴强; 谭华; 蔡灵仓; 经福谦

    2002-01-01

    A correction of Walsh's method for bulk sound velocity calculation for shocked porous materials is accomplishedbased on the Wu-Jing thermodynamic equation of state. The corrected bulk velocities for solid and porous sampleswith low porosities are in good agreement with the corresponding experimental data published previously. On the basisof this corrected equation, the influence of thermoelectrons on the bulk velocity of shocked materials is discussed indetail at pressures of 50, 70 and 200 GPa. Some interesting phenomena are revealed, which seem to be the uniquefeatures of a dynamic-pressure-loading process and could not be found in static experiments.

  2. 21 CFR 820.140 - Handling.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Handling. 820.140 Section 820.140 Food and Drugs... QUALITY SYSTEM REGULATION Handling, Storage, Distribution, and Installation § 820.140 Handling. Each..., contamination, or other adverse effects to product do not occur during handling. ...

  3. 7 CFR 58.443 - Whey handling.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Whey handling. 58.443 Section 58.443 Agriculture... Procedures § 58.443 Whey handling. (a) Adequate sanitary facilities shall be provided for the handling of... objectionable odors. (b) Whey or whey products intended for human food shall at all times be handled in a...

  4. Seven Ways to Handle Pressure

    Institute of Scientific and Technical Information of China (English)

    李冬

    2007-01-01

    1.Take care of your body.Exercise, eat healthily,and get plenty of sleep.You’ll handle stress much better. 2.Take down your thoughts.Recording your thoughts in a diary will help you choose your feelings and relieve~* stress. 3.Talk about it.If possible,find someone

  5. The Dφ Data Handling System

    Institute of Scientific and Technical Information of China (English)

    V.White; D.Adams; 等

    2001-01-01

    In this paper we highlight strategies and choices that make the Dφ Data Handling system markedly different from many other experiments' systems,We emphasize how far the Dφ system has come in innovating and implementing a Dφ-specific Data Grid system.We discuss experiences during the first months of detector commissioning and give some future plans for the system.

  6. Handling nu eller skru ned

    DEFF Research Database (Denmark)

    Kjærsgaard, Poul Søren

    2007-01-01

    Søgningen til fremmedsprogstudier er faldende, samtidig med at Region Syddanmark har lanceret en plan, der forudsætter et sprogligt beredskab. Hvis regionen skal klare sig i konkurrencen, må den og det regionale universitet handle, så at der er sproguddannelser. Ellers må regionen og universitetet...

  7. Data Handling and Parameter Estimation

    DEFF Research Database (Denmark)

    Sin, Gürkan; Gernaey, Krist

    2016-01-01

    literature that are mostly based on the ActivatedSludge Model (ASM) framework and their appropriate extensions (Henze et al., 2000).The chapter presents an overview of the most commonly used methods in the estimation of parameters from experimental batch data, namely: (i) data handling and validation, (ii...

  8. At skabe handling og forandring

    DEFF Research Database (Denmark)

    2015-01-01

    ” (Investigation-Vision-Action-Change, på dansk Undersøgelse-Vision-Handling-Forandring). Forskning i anvendelsen af IVAC i pædagogiske udviklingsprojekter i skoler viser, at lærere kan tilpasse IVAC det konkrete sundhedsemne, de beskæftiger sig med, ligesom metoden kan afpasses pensumkravene, klassetrin og...

  9. TNO reticle handling test platform

    NARCIS (Netherlands)

    Crowcombe, W.E.; Hollemans, C.L.; Fritz, E.C.; Donck, J.C.J. van der; Koster, N.B.

    2014-01-01

    Particle free handling of EUV reticles is a major concern in industry. For reaching economically feasible yield levels, it is reported that Particle-per-Reticle-Pass (PRP) levels should be better than 0.0001 for particles larger than 18 nm. Such cleanliness levels are yet to be reported for current

  10. Bulk-Fill Resin Composites

    DEFF Research Database (Denmark)

    Benetti, Ana Raquel; Havndrup-Pedersen, Cæcilie; Honoré, Daniel;

    2015-01-01

    the restorative procedure. The aim of this study, therefore, was to compare the depth of cure, polymerization contraction, and gap formation in bulk-fill resin composites with those of a conventional resin composite. To achieve this, the depth of cure was assessed in accordance with the International Organization...... for Standardization 4049 standard, and the polymerization contraction was determined using the bonded-disc method. The gap formation was measured at the dentin margin of Class II cavities. Five bulk-fill resin composites were investigated: two high-viscosity (Tetric EvoCeram Bulk Fill, SonicFill) and three low......-viscosity (x-tra base, Venus Bulk Fill, SDR) materials. Compared with the conventional resin composite, the high-viscosity bulk-fill materials exhibited only a small increase (but significant for Tetric EvoCeram Bulk Fill) in depth of cure and polymerization contraction, whereas the low-viscosity bulk...

  11. Explosive bulk charge

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Jacob Lee

    2015-04-21

    An explosive bulk charge, including: a first contact surface configured to be selectively disposed substantially adjacent to a structure or material; a second end surface configured to selectively receive a detonator; and a curvilinear side surface joining the first contact surface and the second end surface. The first contact surface, the second end surface, and the curvilinear side surface form a bi-truncated hemispherical structure. The first contact surface, the second end surface, and the curvilinear side surface are formed from an explosive material. Optionally, the first contact surface and the second end surface each have a substantially circular shape. Optionally, the first contact surface and the second end surface consist of planar structures that are aligned substantially parallel or slightly tilted with respect to one another. The curvilinear side surface has one of a smooth curved geometry, an elliptical geometry, and a parabolic geometry.

  12. The Incredible Bulk

    CERN Document Server

    Fukushima, Keita; Kumar, Jason; Sandick, Pearl; Yamamoto, Takahiro

    2014-01-01

    Recent experimental results from the LHC have placed strong constraints on the masses of colored superpartners. The MSSM parameter space is also constrained by the measurement of the Higgs boson mass, and the requirement that the relic density of lightest neutralinos be consistent with observations. Although large regions of the MSSM parameter space can be excluded by these combined bounds, leptophilic versions of the MSSM can survive these constraints. In this paper we consider a scenario in which the requirements of minimal flavor violation, vanishing $CP$-violation, and mass universality are relaxed, specifically focusing on scenarios with light sleptons. We find a large region of parameter space, analogous to the original bulk region, for which the lightest neutralino is a thermal relic with an abundance consistent with that of dark matter. We find that these leptophilic models are constrained by measurements of the magnetic and electric dipole moments of the electron and muon, and that these models have ...

  13. Creating bulk nanocrystalline metal.

    Energy Technology Data Exchange (ETDEWEB)

    Fredenburg, D. Anthony (Georgia Institute of Technology, Atlanta, GA); Saldana, Christopher J. (Purdue University, West Lafayette, IN); Gill, David D.; Hall, Aaron Christopher; Roemer, Timothy John (Ktech Corporation, Albuquerque, NM); Vogler, Tracy John; Yang, Pin

    2008-10-01

    Nanocrystalline and nanostructured materials offer unique microstructure-dependent properties that are superior to coarse-grained materials. These materials have been shown to have very high hardness, strength, and wear resistance. However, most current methods of producing nanostructured materials in weapons-relevant materials create powdered metal that must be consolidated into bulk form to be useful. Conventional consolidation methods are not appropriate due to the need to maintain the nanocrystalline structure. This research investigated new ways of creating nanocrystalline material, new methods of consolidating nanocrystalline material, and an analysis of these different methods of creation and consolidation to evaluate their applicability to mesoscale weapons applications where part features are often under 100 {micro}m wide and the material's microstructure must be very small to give homogeneous properties across the feature.

  14. SITE GENERATED RADIOLOGICAL WASTE HANDLING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. C. Khamankar

    2000-06-20

    The Site Generated Radiological Waste Handling System handles radioactive waste products that are generated at the geologic repository operations area. The waste is collected, treated if required, packaged for shipment, and shipped to a disposal site. Waste streams include low-level waste (LLW) in solid and liquid forms, as-well-as mixed waste that contains hazardous and radioactive constituents. Liquid LLW is segregated into two streams, non-recyclable and recyclable. The non-recyclable stream may contain detergents or other non-hazardous cleaning agents and is packaged for shipment. The recyclable stream is treated to recycle a large portion of the water while the remaining concentrated waste is packaged for shipment; this greatly reduces the volume of waste requiring disposal. There will be no liquid LLW discharge. Solid LLW consists of wet solids such as ion exchange resins and filter cartridges, as-well-as dry active waste such as tools, protective clothing, and poly bags. Solids will be sorted, volume reduced, and packaged for shipment. The generation of mixed waste at the Monitored Geologic Repository (MGR) is not planned; however, if it does come into existence, it will be collected and packaged for disposal at its point of occurrence, temporarily staged, then shipped to government-approved off-site facilities for disposal. The Site Generated Radiological Waste Handling System has equipment located in both the Waste Treatment Building (WTB) and in the Waste Handling Building (WHB). All types of liquid and solid LLW are processed in the WTB, while wet solid waste from the Pool Water Treatment and Cooling System is packaged where received in the WHB. There is no installed hardware for mixed waste. The Site Generated Radiological Waste Handling System receives waste from locations where water is used for decontamination functions. In most cases the water is piped back to the WTB for processing. The WTB and WHB provide staging areas for storing and shipping LLW

  15. Flexible Electrostatic Technologies for Capture and Handling, Phase 1

    Science.gov (United States)

    Bryan, Thomas

    2015-01-01

    Fundamental to many of NASA's in-space transportation missions is the capture and handling of various objects and vehicles in various orbits for servicing, debris disposal, sample retrieval, and assembly without the benefit of sufficient grapple fixtures and docking ports. To perform similar material handling tasks on Earth, pincher grippers, suction grippers, or magnetic chucks are used, but are unable to reliably grip aluminum and composite spacecraft, insulation, radiators, solar arrays, or extra-terrestrial objects in the vacuum of outer space without dedicated handles in the right places. The electronic Flexible Electrostatic Technologies for space Capture and Handling (FETCH) will enable reliable and compliant gripping (soft dock) of practically any object in various orbits or surfaces without dedicated mechanical features, very low impact capture, and built-in proximity sensing without any conventional actuators. Originally developed to handle semiconductor and glass wafers during vacuum chamber processing without contamination, the normal rigid wafer handling chucks are replaced with thin metal foil segments laminated in flexible insulation driven by commercial off-the-shelf solid state, high-voltage power supplies. Preliminary testing in NASA Marshall Space Flight Center's (MSFC's) Flat Floor Robotics Lab demonstrated compliant alignment and gripping with a full-sized, 150-lb microsat mockup and translation before a clean release with a flip of a switch. The flexible electrostatic gripper pads can be adapted to various space applications with different sizes, shapes, and foil electrode layouts even with openings through the gripper pads for addition of guidance sensors or injection of permanent adhesives. With gripping forces estimated between 0.5 and 2.5 lb/in2 or 70-300 lb/ft2 of surface contact, the FETCH can turn on and off rapidly and repeatedly to enable sample handling, soft docking, in-space assembly, precision relocation, and surface translation

  16. Handling Software Faults with Redundancy

    Science.gov (United States)

    Carzaniga, Antonio; Gorla, Alessandra; Pezzè, Mauro

    Software engineering methods can increase the dependability of software systems, and yet some faults escape even the most rigorous and methodical development process. Therefore, to guarantee high levels of reliability in the presence of faults, software systems must be designed to reduce the impact of the failures caused by such faults, for example by deploying techniques to detect and compensate for erroneous runtime conditions. In this chapter, we focus on software techniques to handle software faults, and we survey several such techniques developed in the area of fault tolerance and more recently in the area of autonomic computing. Since practically all techniques exploit some form of redundancy, we consider the impact of redundancy on the software architecture, and we propose a taxonomy centered on the nature and use of redundancy in software systems. The primary utility of this taxonomy is to classify and compare techniques to handle software faults.

  17. Enteral Feeding Set Handling Techniques.

    Science.gov (United States)

    Lyman, Beth; Williams, Maria; Sollazzo, Janet; Hayden, Ashley; Hensley, Pam; Dai, Hongying; Roberts, Cristine

    2017-04-01

    Enteral nutrition therapy is common practice in pediatric clinical settings. Often patients will receive a pump-assisted bolus feeding over 30 minutes several times per day using the same enteral feeding set (EFS). This study aims to determine the safest and most efficacious way to handle the EFS between feedings. Three EFS handling techniques were compared through simulation for bacterial growth, nursing time, and supply costs: (1) rinsing the EFS with sterile water after each feeding, (2) refrigerating the EFS between feedings, and (3) using a ready-to-hang (RTH) product maintained at room temperature. Cultures were obtained at baseline, hour 12, and hour 21 of the 24-hour cycle. A time-in-motion analysis was conducted and reported in average number of seconds to complete each procedure. Supply costs were inventoried for 1 month comparing the actual usage to our estimated usage. Of 1080 cultures obtained, the overall bacterial growth rate was 8.7%. The rinse and refrigeration techniques displayed similar bacterial growth (11.4% vs 10.3%, P = .63). The RTH technique displayed the least bacterial growth of any method (4.4%, P = .002). The time analysis in minutes showed the rinse method was the most time-consuming (44.8 ± 2.7) vs refrigeration (35.8 ± 2.6) and RTH (31.08 ± 0.6) ( P < .0001). All 3 EFS handling techniques displayed low bacterial growth. RTH was superior in bacterial growth, nursing time, and supply costs. Since not all pediatric formulas are available in RTH, we conclude that refrigerating the EFS between uses is the next most efficacious method for handling the EFS between bolus feeds.

  18. Developing bulk exchange spring magnets

    Energy Technology Data Exchange (ETDEWEB)

    Mccall, Scott K.; Kuntz, Joshua D.

    2017-06-27

    A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

  19. Orion Entry Handling Qualities Assessments

    Science.gov (United States)

    Bihari, B.; Tiggers, M.; Strahan, A.; Gonzalez, R.; Sullivan, K.; Stephens, J. P.; Hart, J.; Law, H., III; Bilimoria, K.; Bailey, R.

    2011-01-01

    The Orion Command Module (CM) is a capsule designed to bring crew back from the International Space Station (ISS), the moon and beyond. The atmospheric entry portion of the flight is deigned to be flown in autopilot mode for nominal situations. However, there exists the possibility for the crew to take over manual control in off-nominal situations. In these instances, the spacecraft must meet specific handling qualities criteria. To address these criteria two separate assessments of the Orion CM s entry Handling Qualities (HQ) were conducted at NASA s Johnson Space Center (JSC) using the Cooper-Harper scale (Cooper & Harper, 1969). These assessments were conducted in the summers of 2008 and 2010 using the Advanced NASA Technology Architecture for Exploration Studies (ANTARES) six degree of freedom, high fidelity Guidance, Navigation, and Control (GN&C) simulation. This paper will address the specifics of the handling qualities criteria, the vehicle configuration, the scenarios flown, the simulation background and setup, crew interfaces and displays, piloting techniques, ratings and crew comments, pre- and post-fight briefings, lessons learned and changes made to improve the overall system performance. The data collection tools, methods, data reduction and output reports will also be discussed. The objective of the 2008 entry HQ assessment was to evaluate the handling qualities of the CM during a lunar skip return. A lunar skip entry case was selected because it was considered the most demanding of all bank control scenarios. Even though skip entry is not planned to be flown manually, it was hypothesized that if a pilot could fly the harder skip entry case, then they could also fly a simpler loads managed or ballistic (constant bank rate command) entry scenario. In addition, with the evaluation set-up of multiple tasks within the entry case, handling qualities ratings collected in the evaluation could be used to assess other scenarios such as the constant bank angle

  20. 77 FR 12293 - PCBs Bulk Product v. Remediation Waste

    Science.gov (United States)

    2012-02-29

    ... AGENCY PCBs Bulk Product v. Remediation Waste AGENCY: Environmental Protection Agency (EPA). ACTION... remediation waste. The proposed reinterpretation is ] in response to questions EPA received about the... Resource Conservation and Recovery, Office of Solid Waste and Emergency Response, U.S. Environmental...

  1. Perovskite oxides: Oxygen electrocatalysis and bulk structure

    Science.gov (United States)

    Carbonio, R. E.; Fierro, C.; Tryk, D.; Scherson, D.; Yeager, Ernest

    1987-01-01

    Perovskite type oxides were considered for use as oxygen reduction and generation electrocatalysts in alkaline electrolytes. Perovskite stability and electrocatalytic activity are studied along with possible relationships of the latter with the bulk solid state properties. A series of compounds of the type LaFe(x)Ni1(-x)O3 was used as a model system to gain information on the possible relationships between surface catalytic activity and bulk structure. Hydrogen peroxide decomposition rate constants were measured for these compounds. Ex situ Mossbauer effect spectroscopy (MES), and magnetic susceptibility measurements were used to study the solid state properties. X ray photoelectron spectroscopy (XPS) was used to examine the surface. MES has indicated the presence of a paramagnetic to magnetically ordered phase transition for values of x between 0.4 and 0.5. A correlation was found between the values of the MES isomer shift and the catalytic activity for peroxide decomposition. Thus, the catalytic activity can be correlated to the d-electron density for the transition metal cations.

  2. Molecular imprinting of bulk, microporous silica

    Science.gov (United States)

    Katz, Alexander; Davis, Mark E.

    2000-01-01

    Molecular imprinting aims to create solid materials containing chemical functionalities that are spatially organized by covalent or non-covalent interactions with imprint (or template) molecules during the synthesis process. Subsequent removal of the imprint molecules leaves behind designed sites for the recognition of small molecules, making the material ideally suited for applications such as separations, chemical sensing and catalysis. Until now, the molecular imprinting of bulk polymers and polymer and silica surfaces has been reported, but the extension of these methods to a wider range of materials remains problematic. For example, the formation of substrate-specific cavities within bulk silica, while conceptually straightforward, has been difficult to accomplish experimentally. Here we describe the imprinting of bulk amorphous silicas with single aromatic rings carrying up to three 3-aminopropyltriethoxysilane side groups; this generates and occupies microporosity and attaches functional organic groups to the pore walls in a controlled fashion. The triethoxysilane part of the molecules' side groups is incorporated into the silica framework during sol-gel synthesis, and subsequent removal of the aromatic core creates a cavity with spatially organized aminopropyl groups covalently anchored to the pore walls. We find that the imprinted silicas act as shape-selective base catalysts. Our strategy can be extended to imprint other functional groups, which should give access to a wide range of functionalized materials.

  3. Materials for Bulk Acoustic Resonators and Filters

    Science.gov (United States)

    Loebl, Hans-Peter

    2003-03-01

    Highly selective solidly mounted bulk acoustic wave (BAW) band pass filters are suited for mobile and wireless systems in the GHz frequency range between 0.8 and 10 GHz. Electro-acoustic thin film BAW resonators are the building blocks these BAW filters. Piezoelectric materials used in these resonators include mainly AlN or ZnO which can be deposited by dedicated thin film sputter deposition techniques. Using these piezo-electric materials and using suited materials for the acoustic Bragg reflector, BAW resonators with high quality factors can be fabricated. The achievable filter bandwidth is approximately 4Alternatively, also ferroelectric thin films might be used to achieve higher coupling coefficient and thus filter bandwidth. BAW resonators and filters have been designed and fabricated on 6" Silicon and glass wafers. Results are presented for resonators and filters operating between 1.95 and 8 GHz. The talk will give an overview of the material aspects which are important for BAW devices. It will be shown that modeling of the resonator and filter response using 1D electro-acoustic simulation (1,2) which includes losses is essential to extract acoustic and electrical material parameters. (1) Solidly Mounted Bulk Acoustic Wave Filters for the Ghz Frequency Range, H.P. Loebl, C. Metzmacher , D.N.Peligrad , R. Mauczok , M. Klee , W. Brand , R.F. Milsom , P.Lok , F.van Straten , A. Tuinhout , J.W.Lobeek, IEEE 2002 Ultrasonics Symposium Munich, October 2002. (2) Combined Acoustic-Electromagnetic Simulation Of Thin-Film Bulk Acoustic Wave Filters, R.F. Milsom, H-P. Löbl, D.N. Peligrad, J-W. Lobeek, A. Tuinhout, R. H. ten Dolle IEEE 2002 Ultrasonics Symposium Munich, October 2002.

  4. 7 CFR 1207.307 - Handle.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.307 Handle. Handle means to grade, pack,...

  5. Proper Handling and Storage of Human Milk

    Science.gov (United States)

    ... Breastfeeding Micronutrient Malnutrition State and Local Programs Proper Handling and Storage of Human Milk Recommend on Facebook ... sure to wash your hands before expressing or handling breast milk. When collecting milk, be sure to ...

  6. 7 CFR 1205.312 - Handle.

    Science.gov (United States)

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE COTTON RESEARCH AND PROMOTION Cotton Research and Promotion Order Definitions § 1205.312 Handle. Handle means to harvest, gin, warehouse, compress, purchase, market, transport, or otherwise acquire ownership or control of cotton....

  7. HMSRP Hawaiian Monk Seal Handling Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

  8. 7 CFR 983.14 - Handle.

    Science.gov (United States)

    2010-01-01

    ... NEW MEXICO Definitions § 983.14 Handle. Handle means to engage in: (a) Receiving pistachios; (b... of interstate or foreign commerce; and/or (d) Placing pistachios into the current of commerce...

  9. Brane Couplings from Bulk Loops

    OpenAIRE

    Georgi, Howard; Grant, Aaron K.; Hailu, Girma

    2000-01-01

    We compute loop corrections to the effective action of a field theory on a five-dimensional $S_1/Z_2$ orbifold. We find that the quantum loop effects of interactions in the bulk produce infinite contributions that require renormalization by four-dimensional couplings on the orbifold fixed planes. Thus bulk couplings give rise to renormalization group running of brane couplings.

  10. Can bulk viscosity drive inflation

    Energy Technology Data Exchange (ETDEWEB)

    Pacher, T.; Stein-Schabes, J.A.; Turner, M.S.

    1987-09-15

    Contrary to other claims, we argue that bulk viscosity associated with the interactions of non- relativistic particles with relativistic particles around the time of the grand unified theory (GUT) phase transition cannot lead to inflation. Simply put, the key ingredient for inflation, negative pressure, cannot arise due to the bulk-viscosity effects of a weakly interacting mixture of relativistic and nonrelativistic particles.

  11. Feedstock storage, handling and processing

    Energy Technology Data Exchange (ETDEWEB)

    Egg, R.P.; Coble, C.G.; Engler, C.R. (Texas A and M Univ., College Station, TX (United States). Dept. of Agricultural Engineering); Lewis, D.H. (Texas A and M Univ., College Station, TX (United States). Dept. of Veterinary Microbiology and Parasitology)

    1993-01-01

    This paper is a review of the technology and research covering components of a methane from biomass system between the field and the digester. It deals primarily with sorghum as a feedstock and focuses on research conducted by the Texas Agricultural Experiment Station. Subjects included in this paper are harvesting, hay storage, ansiling, materials handling, pumping and hydraulic characteristics, hydraulic conductivity, pressure/density relationship, and biological pretreatment. This paper is not a comprehensive design manual; however, design equations and coefficients for sorghum are presented, where available, along with references describing the development and application of design models. (author)

  12. Logik, mening, handling og tale

    DEFF Research Database (Denmark)

    Widell, Peter

    2009-01-01

    skal ses i relation til sandheds- og meningstilskrivning, sådan som den finder sted ikke i først og fremmest i sproget, men i tanken, sådan som den åbenbarer sig i instrumentelle handling. Det er på baggrund af denne pragmatisering af logikken, talehandlingsbegrebet skal ses: Først og fremmest som den...... instrumentelle handleverdens møde med den sociale verden i assertivet. Dernæst som assertivets nødvendige udspaltninger i normativet og konstativet. Og endelig som de perlokutionære handlinger kommissiv, direktiv og informativ....

  13. 29 CFR 1926.953 - Material handling.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Material handling. 1926.953 Section 1926.953 Labor... Material handling. (a) Unloading. Prior to unloading steel, poles, cross arms and similar material, the... employees exist tag lines or other suitable devices shall be used to control loads being handled by hoisting...

  14. 50 CFR 14.111 - Handling.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 1 2010-10-01 2010-10-01 false Handling. 14.111 Section 14.111 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR TAKING, POSSESSION... and Birds to the United States § 14.111 Handling. (a) Care shall be exercised to avoid handling the...

  15. 9 CFR 3.118 - Handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.118 Section 3.118 Animals... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Marine Mammals Transportation Standards § 3.118 Handling. (a) Carriers and intermediate handlers moving marine...

  16. 7 CFR 985.152 - Handling report.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handling report. 985.152 Section 985.152 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... HANDLING OF SPEARMINT OIL PRODUCED IN THE FAR WEST Administrative Rules and Regulations § 985.152 Handling...

  17. 9 CFR 3.142 - Handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.142 Section 3.142 Animals... WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of... Mammals Transportation Standards § 3.142 Handling. (a) Carriers and intermediate handlers shall move live...

  18. Scheduling of outbound luggage handling at airports

    DEFF Research Database (Denmark)

    Barth, Torben C.; Pisinger, David

    2012-01-01

    This article considers the outbound luggage handling problem at airports. The problem is to assign handling facilities to outbound flights and decide about the handling start time. This dynamic, near real-time assignment problem is part of the daily airport operations. Quality, efficiency and rob...

  19. Remote automated material handling of radioactive waste containers

    Energy Technology Data Exchange (ETDEWEB)

    Greager, T.M.

    1994-09-01

    To enhance personnel safety, improve productivity, and reduce costs, the design team incorporated a remote, automated stacker/retriever, automatic inspection, and automated guidance vehicle for material handling at the Enhanced Radioactive and Mixed Waste Storage Facility - Phase V (Phase V Storage Facility) on the Hanford Site in south-central Washington State. The Phase V Storage Facility, scheduled to begin operation in mid-1997, is the first low-cost facility of its kind to use this technology for handling drums. Since 1970, the Hanford Site`s suspect transuranic (TRU) wastes and, more recently, mixed wastes (both low-level and TRU) have been accumulating in storage awaiting treatment and disposal. Currently, the Hanford Site is only capable of onsite disposal of radioactive low-level waste (LLW). Nonradioactive hazardous wastes must be shipped off site for treatment. The Waste Receiving and Processing (WRAP) facilities will provide the primary treatment capability for solid-waste storage at the Hanford Site. The Phase V Storage Facility, which accommodates 27,000 drum equivalents of contact-handled waste, will provide the following critical functions for the efficient operation of the WRAP facilities: (1) Shipping/Receiving; (2) Head Space Gas Sampling; (3) Inventory Control; (4) Storage; (5) Automated/Manual Material Handling.

  20. Transfer Area Mechanical Handling Calculation

    Energy Technology Data Exchange (ETDEWEB)

    B. Dianda

    2004-06-23

    This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAX Company L.L. C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC28-01R W12101'' (Arthur, W.J., I11 2004). This correspondence was appended by further Correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC28-OIRW12101; TDL No. 04-024'' (BSC 2004a). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The purpose of this calculation is to establish preliminary bounding equipment envelopes and weights for the Fuel Handling Facility (FHF) transfer areas equipment. This calculation provides preliminary information only to support development of facility layouts and preliminary load calculations. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process. It is intended that this calculation is superseded as the design advances to reflect information necessary to support License Application. The design choices outlined within this calculation represent a demonstration of feasibility and may or may not be included in the completed design. This calculation provides preliminary weight, dimensional envelope, and equipment position in building for the purposes of defining interface variables. This calculation identifies and sizes major equipment and assemblies that dictate overall equipment dimensions and facility interfaces. Sizing of components is based on the selection of commercially available products, where applicable. This is not a specific recommendation for the future use

  1. Growth and Characterization of Bulk GeSi Solid Solutions

    Science.gov (United States)

    Ritter, Timothy M.

    1999-01-01

    In this work we have grown and characterized several GeSi samples in order to investigate the effects that Silicon concentration, applied magnetic field, and liquid encapsulation have on crystalline quality. Characterization techniques include NDIC microscopy and microprobe spectroscopy. Two samples were grown with a Silicon concentration of approximately 3% and are compared to previous growths having a Silicon fraction of approximately 5%. Growth conditions for one of these samples was varied with the presence of an external applied magnetic field to investigate the possibility of magnetic field damping. A comparison between these two ingots, and with previously grown material, revealed no clear improvement in sample crystalline quality. Three additional samples were grown using a CaCl2 liquid encapsulation technique that produced GeSi material with improved structural quality over previous samples. Comparisons to prior non-encapsulation grown material, details of our methodology, and suggestions for further improvements are discussed.

  2. Crucial Role of Quantum Entanglement in Bulk Properties of Solids

    CERN Document Server

    Brukner, C; Zeilinger, Anton; Brukner, Caslav; Vedral, Vlatko; Zeilinger, Anton

    2004-01-01

    We demonstrate that the magnetic susceptibility of strongly alternating antiferromagnetic spin-1/2 chains is an entanglement witness. Specifically, magnetic susceptibility of copper nitrate (CN) measured in 1963 (Berger et al., Phys. Rev. 132, 1057 (1963)) cannot be described without presence of entanglement. A detailed analysis of the spin correlations in CN as obtained from neutron scattering experiments (Xu et al., Phys. Rev. Lett. 84, 4465 (2000)) provides microscopic support for this interpretation. We present a quantitative analysis resulting in the critical temperature of 5K in both, completely independent, experiments below which entanglement exists.

  3. MPI Debugging with Handle Introspection

    DEFF Research Database (Denmark)

    Brock-Nannestad, Laust; DelSignore, John; Squyres, Jeffrey M.;

    The Message Passing Interface, MPI, is the standard programming model for high performance computing clusters. However, debugging applications on large scale clusters is difficult. The widely used Message Queue Dumping interface enables inspection of message queue state but there is no general...... interface for extracting information from MPI objects such as communicators. A developer can debug the MPI library as if it was part of the application, but this exposes an unneeded level of detail. The Tools Working Group in the MPI Forum has proposed a specification for MPI Handle Introspection....... It defines a standard interface that lets debuggers extract information from MPI objects. Extracted information is then presented to the developer, in a human readable format. The interface is designed to be independent of MPI implementations and debuggers. In this paper, we describe our support...

  4. Liberalisation of municipal waste handling

    DEFF Research Database (Denmark)

    Busck, Ole Gunni

    2006-01-01

    of price reductions in stead of quality demands in both environmental and working environmental terms. A recent study showed major deficits in the capacities of the municipalities to administer qualitative requirements in the tender process and to manage the contracts as an integral part of a scheme...... for improved performance of municipal waste management. The study stresses the need for training and guidance of municipal administrators. Highlighting ‘best practice’ examples the study shows, however, that it is perfectly possible to end up with quality service on contract. It takes a mixture of careful......Liberalisation of municipal waste handling: How are sustainable practices pursued? In the process of liberalization of public services in Europe contracting out the collection of municipal waste has surged. Research in Denmark has shown that municipalities in general have pursued a narrow policy...

  5. Can bulk viscosity drive inflation

    Energy Technology Data Exchange (ETDEWEB)

    Pacher, T.; Stein-Schabes, J.A.; Turner, M.S.

    1987-04-01

    Contrary to other claims, we argue that, bulk viscosity associated with the interactions of nonrelativistic particles with relativistic particles around the time of the grand unified theory (GUT) phase transition cannot lead to inflation. Simply put, the key ingredient for inflation, negative pressure, cannot arise due to the bulk viscosity effects of a weakly-interacting mixture of relativistic and nonrelativistic particles. 13 refs., 1 fig.

  6. Solid Waste Management in Recreational Forest Areas.

    Science.gov (United States)

    Spooner, Charles S.

    The Forest Service, U. S. Department of Agriculture, requested the Bureau of Solid Waste Management to conduct a study of National Forest recreation areas to establish waste generation rates for major recreation activities and to determine the cost of solid waste handling for selected Forest Service Districts. This report describes the 1968 solid…

  7. A Batch Feeder for Inhomogeneous Bulk Materials

    Science.gov (United States)

    Vislov, I. S.; Kladiev, S. N.; Slobodyan, S. M.; Bogdan, A. M.

    2016-04-01

    The work includes the mechanical analysis of mechanical feeders and batchers that find application in various technological processes and industrial fields. Feeders are usually classified according to their design features into two groups: conveyor-type feeders and non-conveyor feeders. Batchers are used to batch solid bulk materials. Less frequently, they are used for liquids. In terms of a batching method, they are divided into volumetric and weighting batchers. Weighting batchers do not provide for sufficient batching accuracy. Automatic weighting batchers include a mass controlling sensor and systems for automatic material feed and automatic mass discharge control. In terms of operating principle, batchers are divided into gravitational batchers and batchers with forced feed of material using conveyors and pumps. Improved consumption of raw materials, decreased loss of materials, ease of use in automatic control systems of industrial facilities allows increasing the quality of technological processes and improve labor conditions. The batch feeder suggested by the authors is a volumetric batcher that has no comparable counterparts among conveyor-type feeders and allows solving the problem of targeted feeding of bulk material batches increasing reliability and hermeticity of the device.

  8. Ergonomics: safe patient handling and mobility.

    Science.gov (United States)

    Hallmark, Beth; Mechan, Patricia; Shores, Lynne

    2015-03-01

    This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care.

  9. Enclosure for handling high activity materials

    Energy Technology Data Exchange (ETDEWEB)

    Jimeno de Osso, F.

    1977-07-01

    One of the most important problems that are met at the laboratories producing and handling radioisotopes is that of designing, building and operating enclosures suitable for the safe handling of active substances. With this purpose in mind, an enclosure has been designed and built for handling moderately high activities under a shielding made of 150 mm thick lead. In this report a description is given of those aspects that may be of interest to people working in this field. (Author)

  10. Determination of thermal properties of composting bulking materials.

    Science.gov (United States)

    Ahn, H K; Sauer, T J; Richard, T L; Glanville, T D

    2009-09-01

    Thermal properties of compost bulking materials affect temperature and biodegradation during the composting process. Well determined thermal properties of compost feedstocks will therefore contribute to practical thermodynamic approaches. Thermal conductivity, thermal diffusivity, and volumetric heat capacity of 12 compost bulking materials were determined in this study. Thermal properties were determined at varying bulk densities (1, 1.3, 1.7, 2.5, and 5 times uncompacted bulk density), particle sizes (ground and bulk), and water contents (0, 20, 50, 80% of water holding capacity and saturated condition). For the water content at 80% of water holding capacity, saw dust, soil compost blend, beef manure, and turkey litter showed the highest thermal conductivity (K) and volumetric heat capacity (C) (K: 0.12-0.81 W/m degrees C and C: 1.36-4.08 MJ/m(3) degrees C). Silage showed medium values at the same water content (K: 0.09-0.47 W/m degrees C and C: 0.93-3.09 MJ/m(3) degrees C). Wheat straw, oat straw, soybean straw, cornstalks, alfalfa hay, and wood shavings produced the lowest K and C values (K: 0.03-0.30 W/m degrees C and C: 0.26-3.45 MJ/m(3) degrees C). Thermal conductivity and volumetric heat capacity showed a linear relationship with moisture content and bulk density, while thermal diffusivity showed a nonlinear relationship. Since the water, air, and solid materials have their own specific thermal property values, thermal properties of compost bulking materials vary with the rate of those three components by changing water content, bulk density, and particle size. The degree of saturation was used to represent the interaction between volumes of water, air, and solids under the various combinations of moisture content, bulk density, and particle size. The first order regression models developed in this paper represent the relationship between degree of saturation and volumetric heat capacity (r=0.95-0.99) and thermal conductivity (r=0.84-0.99) well. Improved

  11. Ergonomic handle for an arthroscopic cutter.

    Science.gov (United States)

    Tuijthof; van Engelen; Herder; Goossens; Snijders; van Dijk

    2003-03-01

    From an analysis of the routinely performed meniscectomy procedures, it was concluded that a punch with a side-ways steerable tip would improve the reachability of meniscal tissue. This potentially leads to a safer and more efficient meniscectomy. Furthermore, the current scissors handles of arthroscopic punches are ergonomically not sufficient. An ergonomic handle is designed with one lever that enables opening and closing of the instrument tip, and side-ways steering of the instrument tip. The design of the handle complies with ergonomic guidelines that were found in the literature. A model of the instrument tip was added to the new handle for comparison with conventional handles. Experiments were performed with a knee joint model, using objective and subjective criteria. The results show that the concept of a side-ways steerable punch is promising, since faster task times are achieved without increasing the risk of damaging healthy tissue. The current design of the ergonomic handle incorporates two degrees of freedom in an intuitive way, the handle is more comfortable to hold, and easy to control. The external memory capabilities of the new handle could be improved. Further development of this handle and the addition of a sufficient instrument tip and force transmission are recommended.

  12. Overview of liquid handling instrumentation for high-throughput screening applications.

    Science.gov (United States)

    Rudnicki, Stewart; Johnston, Sean

    2009-12-01

    Liquid handling in the laboratory has unique challenges specific to the types of research being performed. The devices employed for purposes of performing liquid handling can be broken down into three general categories: bulk reagent dispensers, transfer devices, and plate washers. An overview of these types of liquid handlers, as well as common features and relevance to high-throughput applications, are discussed in this article. Important topics such as sterility, ease of use, cost, and instrument design advantages and disadvantages are also covered. Curr. Protoc. Chem Biol. 1:43-54. © 2009 by John Wiley & Sons, Inc.

  13. Handling S/MAR vectors.

    Science.gov (United States)

    Hagedorn, Claudia; Baiker, Armin; Postberg, Jan; Ehrhardt, Anja; Lipps, Hans J

    2012-06-01

    Nonviral episomal vectors represent attractive alternatives to currently used virus-based expression systems. In the late 1990s, it was shown that a plasmid containing an expression cassette linked to a scaffold/matrix attached region (S/MAR) replicates as a low copy number episome in all cell lines tested, as well as primary cells, and can be used for the genetic modification of higher animals. Once established in the cell, the S/MAR vector replicates early during S-phase and, in the absence of selection, is stably retained in the cells for an unlimited period of time. This vector can therefore be regarded as a minimal model system for studying the epigenetic regulation of replication and functional nuclear architecture. In theory, this construct represents an almost "ideal" expression system for gene therapy. In practice, S/MAR-based vectors stably modify mammalian cells with efficiencies far below those of virus-based constructs. Consequently, they have not yet found application in gene therapy trials. Furthermore, S/MAR vector systems are not trivial to handle and several critical technical issues have to be considered when modifying these vectors for various applications.

  14. Management of industrial solid residues; Gerenciamento de residuos solidos industriais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This chapter gives an overview on the management of industrial solid wastes, approaching the following subjects: classification of industrial solid residues; directives and methodologies for the management of industrial solid residues; instruments for the management of industrial solid residues; handling, packing, storage and transportation; treatment of industrial solid residues; final disposal - landfill for industrial residues; the problem of treatment and final disposer of domestic garbage in Brazil; recycling of the lubricant oils used in brazil; legislation.

  15. Looking for a bulk point

    CERN Document Server

    Maldacena, Juan; Zhiboedov, Alexander

    2015-01-01

    We consider Lorentzian correlators of local operators. In perturbation theory, singularities occur when we can draw a position-space Landau diagram with null lines. In theories with gravity duals, we can also draw Landau diagrams in the bulk. We argue that certain singularities can arise only from bulk diagrams, not from boundary diagrams. As has been previously observed, these singularities are a clear diagnostic of bulk locality. We analyze some properties of these perturbative singularities and discuss their relation to the OPE and the dimensions of double-trace operators. In the exact nonperturbative theory, we expect no singularity at these locations. We prove this statement in 1+1 dimensions by CFT methods.

  16. Unpaired Majorana Modes in Josephson-Junction Arrays with Gapless Bulk Excitations

    Science.gov (United States)

    Pino, M.; Tsvelik, A. M.; Ioffe, L. B.

    2015-11-01

    The search for Majorana bound states in solid-state physics has been limited to materials that display a gap in their bulk spectrum. We show that such unpaired states appear in certain quasi-one-dimensional Josephson-junction arrays with gapless bulk excitations. The bulk modes mediate a coupling between Majorana bound states via the Ruderman-Kittel-Yosida-Kasuya mechanism. As a consequence, the lowest energy doublet acquires a finite energy difference. For a realistic set of parameters this energy splitting remains much smaller than the energy of the bulk eigenstates even for short chains of length L ˜10 .

  17. Project Execution Plan for the Remote Handled Low-Level Waste Disposal Project

    Energy Technology Data Exchange (ETDEWEB)

    Danny Anderson

    2014-07-01

    As part of ongoing cleanup activities at the Idaho National Laboratory (INL), closure of the Radioactive Waste Management Complex (RWMC) is proceeding under the Comprehensive Environmental Response, Compensation, and Liability Act (42 USC 9601 et seq. 1980). INL-generated radioactive waste has been disposed of at RWMC since 1952. The Subsurface Disposal Area (SDA) at RWMC accepted the bulk of INL’s contact and remote-handled low-level waste (LLW) for disposal. Disposal of contact-handled LLW and remote-handled LLW ion-exchange resins from the Advanced Test Reactor in the open pit of the SDA ceased September 30, 2008. Disposal of remote-handled LLW in concrete disposal vaults at RWMC will continue until the facility is full or until it must be closed in preparation for final remediation of the SDA (approximately at the end of fiscal year FY 2017). The continuing nuclear mission of INL, associated ongoing and planned operations, and Naval spent fuel activities at the Naval Reactors Facility (NRF) require continued capability to appropriately dispose of contact and remote handled LLW. A programmatic analysis of disposal alternatives for contact and remote-handled LLW generated at INL was conducted by the INL contractor in Fiscal Year 2006; subsequent evaluations were completed in Fiscal Year 2007. The result of these analyses was a recommendation to the Department of Energy (DOE) that all contact-handled LLW generated after September 30, 2008, be disposed offsite, and that DOE proceed with a capital project to establish replacement remote-handled LLW disposal capability. An analysis of the alternatives for providing replacement remote-handled LLW disposal capability has been performed to support Critical Decision-1. The highest ranked alternative to provide this required capability has been determined to be the development of a new onsite remote-handled LLW disposal facility to replace the existing remote-handled LLW disposal vaults at the SDA. Several offsite DOE

  18. Bulk nano-crystalline alloys

    OpenAIRE

    T.-S. Chin; Lin, C. Y.; Lee, M.C.; R.T. Huang; S. M. Huang

    2009-01-01

    Bulk metallic glasses (BMGs) Fe–B–Y–Nb–Cu, 2 mm in diameter, were successfully annealed to become bulk nano-crystalline alloys (BNCAs) with α-Fe crystallite 11–13 nm in size. A ‘crystallization-and-stop’ model was proposed to explain this behavior. Following this model, alloy-design criteria were elucidated and confirmed successful on another Fe-based BMG Fe–B–Si–Nb–Cu, 1 mm in diameter, with crystallite sizes 10–40 nm. It was concluded that BNCAs can be designed in general by the proposed cr...

  19. Regulating nanomedicine - can the FDA handle it?

    Science.gov (United States)

    Bawa, Raj

    2011-05-01

    There is enormous excitement and expectation surrounding the multidisciplinary field of nanomedicine - the application of nanotechnology to healthcare - which is already influencing the pharmaceutical industry. This is especially true in the design, formulation and delivery of therapeutics. Currently, nanomedicine is poised at a critical stage. However, regulatory guidance in this area is generally lacking and critically needed to provide clarity and legal certainty to manufacturers, policymakers, healthcare providers as well as public. There are hundreds, if not thousands, of nanoproducts on the market for human use but little is known of their health risks, safety data and toxicity profiles. Less is known of nanoproducts that are released into the environment and that come in contact with humans. These nanoproducts, whether they are a drug, device, biologic or combination of any of these, are creating challenges for the Food and Drug Administration (FDA), as regulators struggle to accumulate data and formulate testing criteria to ensure development of safe and efficacious nanoproducts (products incorporating nanoscale technologies). Evidence continues to mount that many nanoproducts inherently posses novel size-based properties and toxicity profiles. Yet, this scientific fact has been generally ignored by the FDA and the agency continues to adopt a precautionary approach to the issue in hopes of countering future potential negative public opinion. As a result, the FDA has simply maintained the status quo with regard to its regulatory policies pertaining to nanomedicine. Therefore, there are no specific laws or mechanisms in place for oversight of nanomedicine and the FDA continues to treat nanoproducts as substantially equivalent ("bioequivalent") to their bulk counterparts. So, for now nanoproducts submitted for FDA review will continue to be subjected to an uncertain regulatory pathway. Such regulatory uncertainty could negatively impact venture funding, stifle

  20. Research on Event Handling Models of Java

    Institute of Scientific and Technical Information of China (English)

    WU Yue; WU Jing; ZHOU Ming-tian

    2004-01-01

    A new event-handling paradigm and its application model are proposed. The working mechanism and principle of event listener model is given in detail. Finally, the launching event mechanisms,the choosing event handling models and the dispatching mechanism are illustrated.

  1. 9 CFR 3.19 - Handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.19 Section 3.19 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of Dogs...

  2. 9 CFR 3.41 - Handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.41 Section 3.41 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...

  3. 9 CFR 3.92 - Handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.92 Section 3.92 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment, and Transportation of...

  4. 9 CFR 3.66 - Handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling. 3.66 Section 3.66 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE STANDARDS Specifications for the Humane Handling, Care, Treatment and Transportation of...

  5. 29 CFR 1917.18 - Log handling.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 7 2010-07-01 2010-07-01 false Log handling. 1917.18 Section 1917.18 Labor Regulations...) MARINE TERMINALS Marine Terminal Operations § 1917.18 Log handling. (a) The employer shall ensure that structures (bunks) used to contain logs have rounded corners and rounded structural parts to avoid...

  6. 38 CFR 1.660 - Expeditious handling.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Expeditious handling. 1.660 Section 1.660 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS GENERAL PROVISIONS Inventions by Employees of Department of Veterans Affairs § 1.660 Expeditious handling. No patent...

  7. 30 CFR 715.16 - Topsoil handling.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Topsoil handling. 715.16 Section 715.16 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR INITIAL PROGRAM REGULATIONS GENERAL PERFORMANCE STANDARDS § 715.16 Topsoil handling. To prevent topsoil from being...

  8. 7 CFR 1219.11 - Handle.

    Science.gov (United States)

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.11 Handle. Handle means to pack, process, transport, purchase, or in any other way to place or cause Hass...

  9. Information Handling, Organizational Structure, and Power.

    Science.gov (United States)

    Buckland, Michael K.

    1989-01-01

    Uses examples from military strategic communications to demonstrate that organizational structures and the distribution of power within organizational structures adapt to changes in information handling capability. It is concluded that delegation and decentralization can be viewed as indicative of inadequate information handling and that improved…

  10. Storage and Handling of Commercially Packaged Foods

    OpenAIRE

    Villalba, Abigail; Boyer, Renee Raiden; Bazemore, Sherry

    2005-01-01

    Proper selection of foods at the grocery store and appropriate storage and handling practices at home are necessary to maintain the quality and safety of commercially processed foods and perishable foods. This brochure offers some guidelines to follow when buying, handling, and storing packaged foods.

  11. Material Handling Equipment Evaluation for Crater Repair

    Science.gov (United States)

    2016-11-01

    material handling equipment with a reduced logistical footprint for use by crater repair teams in airfield damage repair (ADR) scenarios. A market ...compared to currently utilized material handling equipment. This report presents the results of the market survey and equipment evaluations. Results...1 1.2 Objective and scope

  12. Feasibility of Upper Port Plug tube handling

    NARCIS (Netherlands)

    Koning, J.F.; Elzendoorn, B.S.Q.; Ronden, D.M.S.; Klinkhamer, J.F.F.; Biel, W.; Krasikov, Y.; Walker, C.I.

    2011-01-01

    Central, retractable tubes are proposed in several Upper Port Plugs (UPPs) designs for ITER, to enable fast exchange of specific components of diagnostics housed in these UPPs. This paper investigates into possible designs to enable the efficient handling of tubes. The feasibility of tube handling i

  13. 7 CFR 765.151 - Handling payments.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Handling payments. 765.151 Section 765.151 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF AGRICULTURE SPECIAL PROGRAMS DIRECT LOAN SERVICING-REGULAR Borrower Payments § 765.151 Handling payments. (a) Borrower...

  14. Reducing Mouse Anxiety during Handling: Effect of Experience with Handling Tunnels

    OpenAIRE

    Kelly Gouveia; Hurst, Jane L.

    2013-01-01

    Handling stress is a well-recognised source of variation in animal studies that can also compromise the welfare of research animals. To reduce background variation and maximise welfare, methods that minimise handling stress should be developed and used wherever possible. Recent evidence has shown that handling mice by a familiar tunnel that is present in their home cage can minimise anxiety compared with standard tail handling. As yet, it is unclear whether a tunnel is required in each home c...

  15. Longitudinal bulk acoustic mass sensor

    DEFF Research Database (Denmark)

    Hales, Jan Harry; Teva, Jordi; Boisen, Anja

    2009-01-01

    A polycrystalline silicon longitudinal bulk acoustic cantilever is fabricated and operated in air at 51 MHz. A mass sensitivity of 100 Hz/fg (1 fg=10(-15) g) is obtained from the preliminary experiments where a minute mass is deposited on the device by means of focused ion beam. The total noise...

  16. Bulk viscosity and deflationary universes

    CERN Document Server

    Lima, J A S; Waga, I

    2007-01-01

    We analyze the conditions that make possible the description of entropy generation in the new inflationary model by means of a nearequilibrium process. We show that there are situations in which the bulk viscosity cannot describe particle production during the coherent field oscillations phase.

  17. The Universe With Bulk Viscosity

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Exact solutions for a model with variable G, A and bulk viscosity areobtained. Inflationary solutions with constant (de Sitter-type) and variable energydensity are found. An expanding anisotropic universe is found to isotropize duringits expansion but a static universe cannot isotropize. The gravitational constant isfound to increase with time and the cosmological constant decreases with time asAo∝t-2.

  18. Handling and Emplacement Options for Deep Borehole Disposal Conceptual Design.

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hardin, Ernest [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-07-01

    This report presents conceptual design information for a system to handle and emplace packages containing radioactive waste, in boreholes 16,400 ft deep or possibly deeper. Its intended use is for a design selection study that compares the costs and risks associated with two emplacement methods: drill-string and wireline emplacement. The deep borehole disposal (DBD) concept calls for siting a borehole (or array of boreholes) that penetrate crystalline basement rock to a depth below surface of about 16,400 ft (5 km). Waste packages would be emplaced in the lower 6,560 ft (2 km) of the borehole, with sealing of appropriate portions of the upper 9,840 ft (3 km). A deep borehole field test (DBFT) is planned to test and refine the DBD concept. The DBFT is a scientific and engineering experiment, conducted at full-scale, in-situ, without radioactive waste. Waste handling operations are conceptualized to begin with the onsite receipt of a purpose-built Type B shipping cask, that contains a waste package. Emplacement operations begin when the cask is upended over the borehole, locked to a receiving flange or collar. The scope of emplacement includes activities to lower waste packages to total depth, and to retrieve them back to the surface when necessary for any reason. This report describes three concepts for the handling and emplacement of the waste packages: 1) a concept proposed by Woodward-Clyde Consultants in 1983; 2) an updated version of the 1983 concept developed for the DBFT; and 3) a new concept in which individual waste packages would be lowered to depth using a wireline. The systems described here could be adapted to different waste forms, but for design of waste packaging, handling, and emplacement systems the reference waste forms are DOE-owned high- level waste including Cs/Sr capsules and bulk granular HLW from fuel processing. Handling and Emplacement Options for Deep Borehole Disposal Conceptual Design July 23, 2015 iv ACKNOWLEDGEMENTS This report has

  19. Anchor handling tug operations: a practical guide to the operation of modern anchor handling tugs engaged in anchor handling and towing operations

    National Research Council Canada - National Science Library

    Clark, I.C; Hancox, M

    2012-01-01

    ... --Turning and manoeuvring modern anchor handling vessels --The AHTS design and towing operations --The dangers of very high speed loads during deep water anchor handling operations --The dangers...

  20. 33 CFR 154.1325 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

    Science.gov (United States)

    2010-07-01

    ... evaluation criteria for facilities that handle, store, or transport other non-petroleum oils. 154.1325...) POLLUTION FACILITIES TRANSFERRING OIL OR HAZARDOUS MATERIAL IN BULK Response Plans for Other Non-Petroleum..., store, or transport other non-petroleum oils. (a) An owner or operator of a facility that...

  1. Solid-solid phase transitions via melting in metals

    Science.gov (United States)

    Pogatscher, S.; Leutenegger, D.; Schawe, J. E. K.; Uggowitzer, P. J.; Löffler, J. F.

    2016-04-01

    Observing solid-solid phase transitions in-situ with sufficient temporal and spatial resolution is a great challenge, and is often only possible via computer simulations or in model systems. Recently, a study of polymeric colloidal particles, where the particles mimic atoms, revealed an intermediate liquid state in the transition from one solid to another. While not yet observed there, this finding suggests that such phenomena may also occur in metals and alloys. Here we present experimental evidence for a solid-solid transition via the formation of a metastable liquid in a `real' atomic system. We observe this transition in a bulk glass-forming metallic system in-situ using fast differential scanning calorimetry. We investigate the corresponding transformation kinetics and discuss the underlying thermodynamics. The mechanism is likely to be a feature of many metallic glasses and metals in general, and may provide further insight into phase transition theory.

  2. How the NWC handles software as product

    Energy Technology Data Exchange (ETDEWEB)

    Vinson, D.

    1997-11-01

    This tutorial provides a hands-on view of how the Nuclear Weapons Complex project should be handling (or planning to handle) software as a product in response to Engineering Procedure 401099. The SQAS has published the document SQAS96-002, Guidelines for NWC Processes for Handling Software Product, that will be the basis for the tutorial. The primary scope of the tutorial is on software products that result from weapons and weapons-related projects, although the information presented is applicable to many software projects. Processes that involve the exchange, review, or evaluation of software product between or among NWC sites, DOE, and external customers will be described.

  3. Reducing mouse anxiety during handling: effect of experience with handling tunnels.

    Science.gov (United States)

    Gouveia, Kelly; Hurst, Jane L

    2013-01-01

    Handling stress is a well-recognised source of variation in animal studies that can also compromise the welfare of research animals. To reduce background variation and maximise welfare, methods that minimise handling stress should be developed and used wherever possible. Recent evidence has shown that handling mice by a familiar tunnel that is present in their home cage can minimise anxiety compared with standard tail handling. As yet, it is unclear whether a tunnel is required in each home cage to improve response to handling. We investigated the influence of prior experience with home tunnels among two common strains of laboratory mice: ICR(CD-1) and C57BL/6. We compared willingness to approach the handler and anxiety in an elevated plus maze test among mice picked up by the tail, by a home cage tunnel or by an external tunnel shared between cages. Willingness to interact with the handler was much greater for mice handled by a tunnel, even when this was unfamiliar, compared to mice picked up by the tail. Once habituated to handling, C57BL/6 mice were most interactive towards a familiar home tunnel, whereas the ICR strain showed strong interaction with all tunnel handling regardless of any experience of a home cage tunnel. Mice handled by a home cage or external tunnel showed less anxiety in an elevated plus maze than those picked up by the tail. This study shows that using a tunnel for routine handling reduces anxiety among mice compared to tail handling regardless of prior familiarity with tunnels. However, as home cage tunnels can further improve response to handling in some mice, we recommend that mice are handled with a tunnel provided in their home cage where possible as a simple practical method to minimise handling stress.

  4. Demonstration experiments for solid state physics using a table top mechanical Stirling refrigerator

    CERN Document Server

    Osorio, M R; Rodrigo, J G; Suderow, H; Vieira, S; 10.1088/0143-0807/33/4/757

    2012-01-01

    Liquid free cryogenic devices are acquiring importance in basic science and engineering. But they can also lead to improvements in teaching low temperature an solid state physics to graduate students and specialists. Most of the devices are relatively expensive, but small sized equipment is slowly becoming available. Here, we have designed several simple experiments which can be performed using a small Stirling refrigerator. We discuss the measurement of the critical current and temperature of a bulk YBa2Cu3O(7-d) (YBCO) sample, the observation of the levitation of a magnet over a YBCO disk when cooled below the critical temperature and the observation of a phase transition using ac calorimetry. The equipment can be easily handled by students, and also used to teach the principles of liquid free cooling.

  5. Storage and flow of solids. Bulletin No. 123; Vol. 53, No. 26, November 1964

    Energy Technology Data Exchange (ETDEWEB)

    Jenike, A.W.

    1976-11-01

    Information is presented on: the concepts of flowability of bulk solids and of channels and the flow-no flow postulate; equipment and procedures for testing the flow of bulk solids; and bulk flow equipment design. This information should be sufficient to enable the engineer to design storage plants and flow channels for unobstructed bulk flow. Only an outline of the theory of flow is included. (LCL)

  6. Cosmic bulk viscosity through backreaction

    CERN Document Server

    Barbosa, Rodrigo M; Zimdahl, Winfried; Piattella, Oliver F

    2015-01-01

    We consider an effective viscous pressure as the result of a backreaction of inhomogeneities within Buchert's formalism. The use of an effective metric with a time-dependent curvature radius allows us to calculate the luminosity distance of the backreaction model. This quantity is different from its counterpart for a "conventional" spatially flat bulk viscous fluid universe. Both expressions are tested against the SNIa data of the Union2.1 sample with only marginally different results.

  7. Bulk Superconductors in Mobile Application

    Science.gov (United States)

    Werfel, F. N.; Delor, U. Floegel-; Rothfeld, R.; Riedel, T.; Wippich, D.; Goebel, B.; Schirrmeister, P.

    We investigate and review concepts of multi - seeded REBCO bulk superconductors in mobile application. ATZ's compact HTS bulk magnets can trap routinely 1 T@77 K. Except of magnetization, flux creep and hysteresis, industrial - like properties as compactness, power density, and robustness are of major device interest if mobility and light-weight construction is in focus. For mobile application in levitated trains or demonstrator magnets we examine the performance of on-board cryogenics either by LN2 or cryo-cooler application. The mechanical, electric and thermodynamical requirements of compact vacuum cryostats for Maglev train operation were studied systematically. More than 30 units are manufactured and tested. The attractive load to weight ratio is more than 10 and favours group module device constructions up to 5 t load on permanent magnet (PM) track. A transportable and compact YBCO bulk magnet cooled with in-situ 4 Watt Stirling cryo-cooler for 50 - 80 K operation is investigated. Low cooling power and effective HTS cold mass drives the system construction to a minimum - thermal loss and light-weight design.

  8. Management of transport and handling contracts

    CERN Document Server

    Rühl, I

    2004-01-01

    This paper shall outline the content, application and management strategies for the various contracts related to transport and handling activities. In total, the two sections Logistics and Handling Maintenance are in charge of 27 (!) contracts ranging from small supply contracts to big industrial support contracts. The activities as well as the contracts can generally be divided into four main topics "Vehicle Fleet Management"; "Supply, Installation and Commissioning of Lifting and Hoisting Equipment"; "Equipment Maintenance" and "Industrial Support for Transport and Handling". Each activity and contract requires different approaches and permanent adaptation to the often changing CERN's requirements. In particular, the management and the difficulties experienced with the contracts E072 "Maintenance of lifting and hoisting equipment", F420 "Supply of seven overhead traveling cranes for LHC" and S090/S103 "Industrial support for transport and handling" will be explained in detail.

  9. Handling knowledge on osteoporosis - a qualitative study

    DEFF Research Database (Denmark)

    Nielsen, Dorthe; Huniche, Lotte; Brixen, Kim

    2013-01-01

    Scand J Caring Sci; 2012 Handling knowledge on osteoporosis - a qualitative study The aim of this qualitative study was to increase understanding of the importance of osteoporosis information and knowledge for patients' ways of handling osteoporosis in their everyday lives. Interviews were...... performed with 14 patients recruited from two English university hospitals and 12 patients from a Danish university hospital. Critical psychology was used as a theoretical framework for the data analysis, which aimed at shedding light on patients' ways of conducting everyday life with osteoporosis....... The themes that emerged from the analysis showed that life conditions influenced the way in which risk, pain and osteoporosis were handled. Everyday life was also influenced by patients' attitude to treatment. The patients who were experiencing emotional difficulties in handling osteoporosis were not those...

  10. Live-trapping and handling brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This paper reports techniques developed to live trap and handle brown bears on the Kodiak National Wildlife Refuge. The brown bears (Ursus middendorffi) on the...

  11. Aerobot Sampling and Handling System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Honeybee Robotics proposes to: ?Derive and document the functional and technical requirements for Aerobot surface sampling and sample handling across a range of...

  12. 7 CFR 926.9 - Handle.

    Science.gov (United States)

    2010-01-01

    ... the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.9 Handle....

  13. How Do Search Engines Handle Chinese Queries?

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2005-10-01

    Full Text Available The use of languages other than English has been growing exponentially on the Web. However, the major search engines have been lagging behind in providing indexes and search features to handle these languages. This article explores the characteristics of the Chinese language and how queries in this language are handled by different search engines. Queries were entered in two major search engines (Google and AlltheWeb and two search engines developed for Chinese (Sohu and Baidu. Criteria such as handling word segmentation, number of retrieved documents, and correct display and identification of Chinese characters were used to examine how the search engines handled the queries. The results showed that the performance of the two major search engines was not on a par with that of the search engines developed for Chinese.

  14. GeoLab Sample Handling System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop  a robotic sample handling/ manipulator system for the GeoLab glovebox. This work leverages from earlier GeoLab work and a 2012 collaboration with a...

  15. 30o inclination in handles of plastic boxes can reduce postural and muscular workload during handling

    Directory of Open Access Journals (Sweden)

    Luciana C. C. B. Silva

    2013-06-01

    Full Text Available BACKGROUND: The handling of materials, which occurs in the industrial sector, is associated with lesions on the lumbar spine and in the upper limbs. Inserting handles in industrial boxes is a way to reduce work-related risks. Although the position and angle of the handles are significant factors in comfort and safety during handling, these factors have rarely been studied objectively. OBJECTIVE: To compare the handling of a commercial box and prototypes with handles and to evaluate the effects on upper limb posture, muscle electrical activity, and perceived acceptability using different grips while handling materials from different heights. METHOD: Thirty-seven healthy volunteers evaluated the handles of prototypes that allowed for changes in position (top and bottom and angle (0°, 15°, and 30°. Wrist, elbow, and shoulder movements were evaluated using electrogoniometry and inclinometry. The muscle electrical activity in the wrist extensors, biceps brachii, and the upper portion of the trapezius was measured using a portable electromyographer. The recorded data on muscle movements and electrical activity were synchronized. Subjective evaluations of acceptability were evaluated using a visual analog scale. RESULTS AND CONCLUSIONS: The prototypes with handles at a 30° angle produced the highest acceptability ratings, more neutral wrist positions, lower levels of electromyographic activity for the upper trapezius, and lower elevation angles for the arms. The different measurement methods were complementary in evaluating the upper limbs during handling.

  16. Development of standard components for remote handling

    Energy Technology Data Exchange (ETDEWEB)

    Taguchi, Kou; Kakudate, Satoshi; Nakahira, Masataka; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    The core of Fusion Experimental Reactor consists of various components such as superconducting magnets and forced-cooled in-vessel components, which are remotely maintained due to intense of gamma radiation. Mechanical connectors such as cooling pipe connections, insulation joints and electrical connectors are commonly used for maintenance of these components and have to be standardized in terms of remote handling. This paper describes these mechanical connectors developed as the standard component compatible with remote handling and tolerable for radiation. (author)

  17. Safety Training: "Manual Handling" course in September

    CERN Multimedia

    Safety Training, HSE Unit

    2016-01-01

    The next "Manual Handling" course will be given, in French, on 26 September 2016. This course is designed for anyone required to carry out manual handling of loads in the course of their work.   The main objective of this course is to adopt and apply the basic principles of physical safety and economy of effort. There are places available. If you are interested in following this course, please fill an EDH training request via our catalogue. 

  18. HANDLING, STORAGE AND IRON ORE QUALITY

    Directory of Open Access Journals (Sweden)

    Fabiana Fonseca Fortes

    2012-06-01

    Full Text Available This paper aims to identify handling and storage impact in iron ore quality, in their physical and chemical characteristics most important for a mining. It is tried to show the interferences in iron ore quality caused by the handling equipment and stockpiling. The research is restricted to Complexo Vargem Grande (Vale. The timeline was demarcated based on the formation of stockpiling. The fieldwork enables data collection and distinction of the routine procedures of casual operations handling. The quantitative analysis is conducted by the statistical method. As a conclusion, handling and storage identified are able to insert changes in physical and chemical characteristics of iron ore. Storage contributes to reduce variability of silica and alumina concentrations, but contributes too particle size deterioration. The handling induces degradation and segregation. However, there is the possibility to decrease handling of the ore and to establish the ideal size of stocks on the system in study, improving the efficiency of the system and consequent in global costs.

  19. Elastic properties of Pd40Cu30Ni10P20 bulk glass in supercooled liquid region

    DEFF Research Database (Denmark)

    Nishiyama, N.; Inoue, A.; Jiang, Jianzhong

    2001-01-01

    In situ ultrasonic measurements for the Pd40Cu30Ni10P20 bulk glass in three states: Glassy solid, supercooled liquid, and crystalline, have been performed. It is found that velocities of both longitudinal and transverse waves and elastic moduli (shear modulus, bulk modulus, Young's modulus, and L...

  20. A Mars Sample Return Sample Handling System

    Science.gov (United States)

    Wilson, David; Stroker, Carol

    2013-01-01

    We present a sample handling system, a subsystem of the proposed Dragon landed Mars Sample Return (MSR) mission [1], that can return to Earth orbit a significant mass of frozen Mars samples potentially consisting of: rock cores, subsurface drilled rock and ice cuttings, pebble sized rocks, and soil scoops. The sample collection, storage, retrieval and packaging assumptions and concepts in this study are applicable for the NASA's MPPG MSR mission architecture options [2]. Our study assumes a predecessor rover mission collects samples for return to Earth to address questions on: past life, climate change, water history, age dating, understanding Mars interior evolution [3], and, human safety and in-situ resource utilization. Hence the rover will have "integrated priorities for rock sampling" [3] that cover collection of subaqueous or hydrothermal sediments, low-temperature fluidaltered rocks, unaltered igneous rocks, regolith and atmosphere samples. Samples could include: drilled rock cores, alluvial and fluvial deposits, subsurface ice and soils, clays, sulfates, salts including perchlorates, aeolian deposits, and concretions. Thus samples will have a broad range of bulk densities, and require for Earth based analysis where practical: in-situ characterization, management of degradation such as perchlorate deliquescence and volatile release, and contamination management. We propose to adopt a sample container with a set of cups each with a sample from a specific location. We considered two sample cups sizes: (1) a small cup sized for samples matching those submitted to in-situ characterization instruments, and, (2) a larger cup for 100 mm rock cores [4] and pebble sized rocks, thus providing diverse samples and optimizing the MSR sample mass payload fraction for a given payload volume. We minimize sample degradation by keeping them frozen in the MSR payload sample canister using Peltier chip cooling. The cups are sealed by interference fitted heat activated memory

  1. 7 CFR 948.23 - Handling for special purposes.

    Science.gov (United States)

    2010-01-01

    ... Order Regulating Handling Regulation § 948.23 Handling for special purposes. Upon the basis of....77, or any combination thereof, to facilitate handling of potatoes for (a) Relief or charity; (b...

  2. 7 CFR 959.53 - Handling for special purposes.

    Science.gov (United States)

    2010-01-01

    ... Regulating Handling Regulations § 959.53 Handling for special purposes. Regulations in effect pursuant to §§ 959.42, 959.52, or 959.60 may be modified, suspended, or terminated to facilitate handling of...

  3. 7 CFR 929.60 - Handling for special purposes.

    Science.gov (United States)

    2010-01-01

    ... LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling Reports and Records § 929.60 Handling... facilitate handling of excess cranberries for the following purposes: (a) Charitable institutions;...

  4. Solid propellants.

    Science.gov (United States)

    Marsh, H. E., Jr.; Hutchison, J. J.

    1972-01-01

    The basic principles underlying propulsion by rocket motor are examined together with the configuration of a solid propellant motor. Solid propellants and their preparation are discussed, giving attention to homogeneous propellants, composite propellants, energetic considerations in choosing a solid propellant, the processing of composite propellants, and some examples of new developments. The performance of solid propellants is investigated, taking into account characteristics velocity, the specific impulse, and performance calculations. Aspects of propellant development considered include nonperformance requirements for solid propellants, the approach to development, propellant mechanical properties, and future trends.

  5. Bulk Moisture and Salinity Sensor

    Science.gov (United States)

    Nurge, Mark; Monje, Oscar; Prenger, Jessica; Catechis, John

    2013-01-01

    Measurement and feedback control of nutrient solutions in plant root zones is critical to the development of healthy plants in both terrestrial and reduced-gravity environments. In addition to the water content, the amount of fertilizer in the nutrient solution is important to plant health. This typically requires a separate set of sensors to accomplish. A combination bulk moisture and salinity sensor has been designed, built, and tested with different nutrient solutions in several substrates. The substrates include glass beads, a clay-like substrate, and a nutrient-enriched substrate with the presence of plant roots. By measuring two key parameters, the sensor is able to monitor both the volumetric water content and salinity of the nutrient solution in bulk media. Many commercially available moisture sensors are point sensors, making localized measurements over a small volume at the point of insertion. Consequently, they are more prone to suffer from interferences with air bubbles, contact area of media, and root growth. This makes it difficult to get an accurate representation of true moisture content and distribution in the bulk media. Additionally, a network of point sensors is required, increasing the cabling, data acquisition, and calibration requirements. measure the dielectric properties of a material in the annular space of the vessel. Because the pore water in the media often has high salinity, a method to measure the media moisture content and salinity simultaneously was devised. Characterization of the frequency response for capacitance and conductance across the electrodes was completed for 2-mm glass bead media, 1- to 2-mm Turface (a clay like media), and 1- to 2-mm fertilized Turface with the presence of root mass. These measurements were then used to find empirical relationships among capacitance (C), the dissipation factor (D), the volumetric water content, and the pore water salinity.

  6. Toughness of Bulk Metallic Glasses

    Directory of Open Access Journals (Sweden)

    Shantanu V. Madge

    2015-07-01

    Full Text Available Bulk metallic glasses (BMGs have desirable properties like high strength and low modulus, but their toughness can show much variation, depending on the kind of test as well as alloy chemistry. This article reviews the type of toughness tests commonly performed and the factors influencing the data obtained. It appears that even the less-tough metallic glasses are tougher than oxide glasses. The current theories describing the links between toughness and material parameters, including elastic constants and alloy chemistry (ordering in the glass, are discussed. Based on the current literature, a few important issues for further work are identified.

  7. Handling Qualities Optimization for Rotorcraft Conceptual Design

    Science.gov (United States)

    Lawrence, Ben; Theodore, Colin R.; Berger, Tom

    2016-01-01

    Over the past decade, NASA, under a succession of rotary-wing programs has been moving towards coupling multiple discipline analyses in a rigorous consistent manner to evaluate rotorcraft conceptual designs. Handling qualities is one of the component analyses to be included in a future NASA Multidisciplinary Analysis and Optimization framework for conceptual design of VTOL aircraft. Similarly, the future vision for the capability of the Concept Design and Assessment Technology Area (CD&A-TA) of the U.S Army Aviation Development Directorate also includes a handling qualities component. SIMPLI-FLYD is a tool jointly developed by NASA and the U.S. Army to perform modeling and analysis for the assessment of flight dynamics and control aspects of the handling qualities of rotorcraft conceptual designs. An exploration of handling qualities analysis has been carried out using SIMPLI-FLYD in illustrative scenarios of a tiltrotor in forward flight and single-main rotor helicopter at hover. Using SIMPLI-FLYD and the conceptual design tool NDARC integrated into a single process, the effects of variations of design parameters such as tail or rotor size were evaluated in the form of margins to fixed- and rotary-wing handling qualities metrics as well as the vehicle empty weight. The handling qualities design margins are shown to vary across the flight envelope due to both changing flight dynamic and control characteristics and changing handling qualities specification requirements. The current SIMPLI-FLYD capability and future developments are discussed in the context of an overall rotorcraft conceptual design process.

  8. Photoelectron spectroscopy bulk and surface electronic structures

    CERN Document Server

    Suga, Shigemasa

    2014-01-01

    Photoelectron spectroscopy is now becoming more and more required to investigate electronic structures of various solid materials in the bulk, on surfaces as well as at buried interfaces. The energy resolution was much improved in the last decade down to 1 meV in the low photon energy region. Now this technique is available from a few eV up to 10 keV by use of lasers, electron cyclotron resonance lamps in addition to synchrotron radiation and X-ray tubes. High resolution angle resolved photoelectron spectroscopy (ARPES) is now widely applied to band mapping of materials. It attracts a wide attention from both fundamental science and material engineering. Studies of the dynamics of excited states are feasible by time of flight spectroscopy with fully utilizing the pulse structures of synchrotron radiation as well as lasers including the free electron lasers (FEL). Spin resolved studies also made dramatic progress by using higher efficiency spin detectors and two dimensional spin detectors. Polarization depend...

  9. Performance of A Horizontal Cylinder Type Rotary Dryer for Drying Process ofOrganic Compost from Solid Waste Cocoa Pod

    Directory of Open Access Journals (Sweden)

    Sukrisno Widyotomo

    2008-07-01

    Full Text Available Cocoa pod husk is the bigest component of cocoa pod, about 70% of total ht of mature pod, and to potentially used as organic compost source. Poten tial solid waste of cocoa pod husk from a cocoa processing centre is about 15— 22 m3/ha/year. A cocoa plantation needs about 20—30 ton/ha/year of organic matters. One of important steps in compos processing technology of cocoa pod solid waste is drying process. Organic compost with 20% moisture content is more easy in handling, application, storage and distribution. Indonesian Coffee and Cocoa Research Institute has designed and tested a horizontal cylinder type rotary dryer for drying process of organic compos from solid waste cocoa pod with kerosene burner as energy sources. The objective of this research is to study performance of a horizontal cylinder type rotary dryer using kerosene burner as energy source for drying process of organic compost from solid waste cocoa pod. The material used was solid waste cocoa pod with 70—75% moisture content (wet basis, 70% size particle larger than 4.76 mm, and 30% size particle less than 4.76 mm, 690—695 kg/m3 bulk density. Drying process temperatures treatment were 60OC, 80OC, and 100OC, and cylinder rotary speed treatments were 7 rpm, 10 rpm, dan 16 rpm. The results showed that dryer had capacity about 102—150 kg/h depend on drying temperature and cylinder rotary speed. Optimum operation condition at 100OC drying temperature, and 10 rpm cylinder rotary speed with drying time to reach final moisture content of 20% was 1,6 h, capacity 136,14 kg/ h, bulk density 410 kg/m3, porocity 45,15%, kerosene consumption as energy source was 2,57 l/h, and drying efficiency 68,34%. Key words : cocoa, drying, rotary dryer, compost, waste

  10. Adaptive finite element-element-free Galerkin coupling method for bulk metal forming processes

    Institute of Scientific and Technical Information of China (English)

    Lei-chao LIU; Xiang-huai DONG; Cong-xin LI

    2009-01-01

    An adaptive finite element-element-free Galerkin (FE-EFG) coupling method is proposed and developed for the numerical simulation of bulk metal forming processes. This approach is able to adaptively convert distorted FE elements to EFG domain in analysis. A new scheme to implement adaptive conversion and coupling is presented. The coupling method takes both advantages of finite element method (FEM) and meshless methods. It is capable of handling large deformations with no need of remeshing procedures, while it is computationally more efficient than those full meshless methods. The effectiveness of the proposed method is demonstrated with the numerical simulations of the bulk metal forming processes including forging and extrusion.

  11. Rotorcraft handling-qualities design criteria development

    Science.gov (United States)

    Aiken, Edwin W.; Lebacqz, J. Victor; Chen, Robert T. N.; Key, David L.

    1988-01-01

    Joint NASA/Army efforts at the Ames Research Center to develop rotorcraft handling-qualities design criteria began in earnest in 1975. Notable results were the UH-1H VSTOLAND variable stability helicopter, the VFA-2 camera-and-terrain-board simulator visual system, and the generic helicopter real-time mathematical model, ARMCOP. An initial series of handling-qualities studies was conducted to assess the effects of rotor design parameters, interaxis coupling, and various levels of stability and control augmentation. The ability to conduct in-flight handling-qualities research was enhanced by the development of the NASA/Army CH-47 variable-stability helicopter. Research programs conducted using this vehicle include vertical-response investigations, hover augmentation systems, and the effects of control-force characteristics. The handling-qualities data base was judged to be sufficient to allow an update of the military helicopter handling-qualities specification, MIL-H-8501. These efforts, including not only the in-house experimental work but also contracted research and collaborative programs performed under the auspices of various international agreements. The report concludes by reviewing the topics that are currently most in need of work, and the plans for addressing these topics.

  12. Handling Qualities Implications for Crewed Spacecraft Operations

    Science.gov (United States)

    Bailey, Randall E.; Jackson, E. Bruce; Arthur, J. J.

    2012-01-01

    Abstract Handling qualities embody those qualities or characteristics of an aircraft that govern the ease and precision with which a pilot is able to perform the tasks required in support of an aircraft role. These same qualities are as critical, if not more so, in the operation of spacecraft. A research, development, test, and evaluation process was put into effect to identify, understand, and interpret the engineering and human factors principles which govern the pilot-vehicle dynamic system as they pertain to space exploration missions and tasks. Toward this objective, piloted simulations were conducted at the NASA Langley Research Center and Ames Research Center for earth-orbit proximity operations and docking and lunar landing. These works provide broad guidelines for the design of spacecraft to exhibit excellent handling characteristics. In particular, this work demonstrates how handling qualities include much more than just stability and control characteristics of a spacecraft or aircraft. Handling qualities are affected by all aspects of the pilot-vehicle dynamic system, including the motion, visual and aural cues of the vehicle response as the pilot performs the required operation or task. A holistic approach to spacecraft design, including the use of manual control, automatic control, and pilot intervention/supervision is described. The handling qualities implications of design decisions are demonstrated using these pilot-in-the-loop evaluations of docking operations and lunar landings.

  13. Effective Teaching Practices in Handling Non Readers

    Directory of Open Access Journals (Sweden)

    Jacklyn S. Dacalos

    2016-08-01

    Full Text Available The study determined the effective teaching practices in handling nonreaders. This seeks to answer the following objectives: describe the adjustments, effective strategies, and scaffolds utilized by teachers in handling nonreaders; differentiate the teachers’ reading adjustments, strategies and scaffolds in teaching nonreaders; analyze the teaching reading efficiency of nonreaders using effective teaching reading strategies; and find significant correlation of nonreaders’ grades and reading teachers’ reading adjustments, strategies and scaffolds. This study utilized mixed methods of research. Case studies of five public schools teachers were selected as primary subjects, who were interviewed in handling nonreaders in the areas of adjustments, strategies, and reading scaffolds. Actual teaching observation was conducted according to the five subjects’ most convenient time. In ascertaining the nonreaders’ academic performance, the students’ grades in English subject was analyzed using T-Test within subject design. Handling nonreaders in order to read and understand better in the lesson is an arduous act, yet; once done with effectiveness and passion, it yielded a great amount of learning success. Effective teaching practices in handling nonreaders comprised the use of teachers’ adjustments, strategies, and scaffolds to establish reading mastery, exposing them to letter sounds, short stories, and the use of follow-up. WH questions enhanced their reading performance significantly. Variations of reading teachers’ nature as: an enabler, a facilitator, a humanist, a behaviorist, and an expert, as regards to their teaching practices, were proven significant to students’ reading effectiveness.

  14. Handling and Treatment of Poultry Hatchery Waste: A Review

    Directory of Open Access Journals (Sweden)

    Belinda Rodda

    2011-01-01

    Full Text Available A literature review was undertaken to identify methods being used to handle and treat hatchery waste. Hatchery waste can be separated into solid waste and liquid waste by centrifuging or by using screens. Potential methods for treating hatchery waste on site include use of a furnace to heat the waste to produce steam to run a turbine generator or to use an in line composter to stabilise the waste. There is also potential to use anaerobic digestion at hatcheries to produce methane and fertilisers. Hatcheries disposing wastewater into lagoons could establish a series of ponds where algae, zooplankton and fish utilise the nutrients using integrated aquaculture which cleans the water making it more suitable for irrigation. The ideal system to establish in a hatchery would be to incorporate separation and handling equipment to separate waste into its various components for further treatment. This would save disposal costs, produce biogas to reduce power costs at plants and produce a range of value added products. However the scale of operations at many hatcheries is too small and development of treatment systems may not be viable.

  15. Detection of Berry's phase in a Bulk Rashba semiconductor.

    Science.gov (United States)

    Murakawa, H; Bahramy, M S; Tokunaga, M; Kohama, Y; Bell, C; Kaneko, Y; Nagaosa, N; Hwang, H Y; Tokura, Y

    2013-12-20

    The motion of electrons in a solid has a profound effect on its topological properties and may result in a nonzero Berry's phase, a geometric quantum phase encoded in the system's electronic wave function. Despite its ubiquity, there are few experimental observations of Berry's phase of bulk states. Here, we report detection of a nontrivial π Berry's phase in the bulk Rashba semiconductor BiTeI via analysis of the Shubnikov-de Haas (SdH) effect. The extremely large Rashba splitting in this material enables the separation of SdH oscillations, stemming from the spin-split inner and outer Fermi surfaces. For both Fermi surfaces, we observe a systematic π-phase shift in SdH oscillations, consistent with the theoretically predicted nontrivial π Berry's phase in Rashba systems.

  16. Survey of transportation of liquid bulk chemicals in the Baltic Sea

    Energy Technology Data Exchange (ETDEWEB)

    Posti, A.; Hakkinen, J.

    2012-07-01

    This study is made as a part of the Chembaltic (Risks of Maritime Transportation of Chemicals in Baltic Sea) project which gathers information on the chemicals transported in the Baltic Sea. The purpose of this study is to provide an overview of handling volumes of liquid bulk chemicals (including liquefied gases) in the Baltic Sea ports and to find out what the most transported liquid bulk chemicals in the Baltic Sea are. Oil and oil products are also viewed in this study but only in a general level. Oils and oil products may also include chemical-related substances (e.g. certain bio-fuels which belong to MARPOL annex II category) in some cargo statistics. Chemicals in packaged form are excluded from the study. Most of the facts about the transport volumes of chemicals presented in this study are based on secondary written sources of Scandinavian, Russian, Baltic and international origin. Furthermore, statistical sources, academic journals, periodicals, newspapers and in later years also different homepages on the Internet have been used as sources of information. Chemical handling volumes in Finnish ports were examined in more detail by using a nationwide vessel traffic system called PortNet. Many previous studies have shown that the Baltic Sea ports are annually handling more than 11 million tonnes of liquid chemicals transported in bulk. Based on this study, it appears that the number may be even higher. The liquid bulk chemicals account for approximately 4 % of the total amount of liquid bulk cargoes handled in the Baltic Sea ports. Most of the liquid bulk chemicals are handled in Finnish and Swedish ports and their proportion of all liquid chemicals handled in the Baltic Sea is altogether over 50 %. The most handled chemicals in the Baltic Sea ports are methanol, sodium hydroxide solution, ammonia, sulphuric and phosphoric acid, pentanes, aromatic free solvents, xylenes, methyl tert-butyl ether (MTBE) and ethanol and ethanol solutions. All of these chemicals

  17. Randomly removing g handles at once

    CERN Document Server

    Borradaile, Glencora; Sidiropoulos, Anastasios

    2010-01-01

    Indyk and Sidiropoulos (2007) proved that any orientable graph of genus $g$ can be probabilistically embedded into a graph of genus $g-1$ with constant distortion. Viewing a graph of genus $g$ as embedded on the surface of a sphere with $g$ handles attached, Indyk and Sidiropoulos' method gives an embedding into a distribution over planar graphs with distortion $2^{O(g)}$, by iteratively removing the handles. By removing all $g$ handles at once, we present a probabilistic embedding with distortion $O(g^2)$ for both orientable and non-orientable graphs. Our result is obtained by showing that the nimum-cut graph of Erickson and Har Peled (2004) has low dilation, and then randomly cutting this graph out of the surface using the Peeling Lemma of Lee and Sidiropoulos (2009).

  18. DOE handbook: Tritium handling and safe storage

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The DOE Handbook was developed as an educational supplement and reference for operations and maintenance personnel. Most of the tritium publications are written from a radiological protection perspective. This handbook provides more extensive guidance and advice on the null range of tritium operations. This handbook can be used by personnel involved in the full range of tritium handling from receipt to ultimate disposal. Compliance issues are addressed at each stage of handling. This handbook can also be used as a reference for those individuals involved in real time determination of bounding doses resulting from inadvertent tritium releases. This handbook provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance-based issues and adds insight to those areas that currently possess unclear DOE guidance.

  19. Solid state physics at ISOLDE

    CERN Document Server

    Deicher, M; Wichert, T

    2003-01-01

    Radioactive atoms have been used in solid state physics and in materials science for decades. Besides their classical applications as tracers for diffusion studies, nuclear techniques such as Mossbauer spectroscopy, perturbed gamma gamma angular correlation, beta -NMR, and emission channeling make use of nuclear properties (via hyperfine interactions or emitted alpha or beta particles) to gain microscopic information on structural and dynamical properties of solids. During the last decade, the availability of many different radioactive isotopes as clean ion beams at ISOL facilities like ISOLDE/CERN has triggered a new era involving methods sensitive to the optical and electronic properties of solids, especially in the field of semiconductor physics. This overview will browse through ongoing solid state physics experiments with radioactive ion beams at ISOLDE. A wide variety of problems is under study, involving bulk properties, surfaces and interfaces in many different systems like semiconductors, superconduc...

  20. Handling of fuel chips - a health problem

    Energy Technology Data Exchange (ETDEWEB)

    Stroemquist, L.H.; Blomqvist, G.; Karlsson, E.; Vincent, A.; Lundgren, R.; Eliasson, L.

    1980-01-01

    An investigation has been made about health problems and occurrence of mold in connection with handling of fuel chips. The investigation was composed of three different parts. First, an inquiry was made to chip stokers about handling, storage etc. of chips as well as possible medical trouble. The answers indicated that symptoms on allergic alveolitis are common among chip stokers, 13% of the answers. Second, a determination of the proportion of living airborne colony-forming mold fungi was made at some chip using units. Third, a pilot study was made to examine the possibilities to improve storability of fuel chips using high-temperature drying.

  1. Solid lubricants

    Science.gov (United States)

    Sliney, Harold E.

    1993-01-01

    The state of knowledge of solid lubricants is reviewed. The results of research on solid lubricants from the 1940's to the present are presented from a historical perspective. Emphasis is placed largely, but not exclusively, on work performed at NASA Lewis Research Center with a natural focus on aerospace applications. However, because of the generic nature of the research, the information presented in this review is applicable to most areas where solid lubricant technology is useful.

  2. [Ergonomic analysis of the handle of manual instruments for dental hygiene].

    Science.gov (United States)

    Migliario, Mario; Franchignoni, Marco; Soldati, Libero; Melle, Andrea; Carcieri, Paola; Ferriero, Giorgio

    2012-01-01

    Work-related musculoskeletal disorders of upper limbs are very common among dental hygienists. To minimize the risk of their occurrence, it is essential that attention be paid to proper ergonomics in the workplace, including the selection of instrumentation. At present there are no specific guidelines but only some indications for the selection of the different hand tools. The main purpose of this study was to make a comparative analysis of different types of handles of hand tools used for root planing (Gracey curettes). Nine dental hygienists were interviewed with a questionnaire aimed to assess three different types of curette handle. The results showed that lightness, being of solid steel, having a cylindrical non-uniform shape with full enlarged cross-section, and being silicon coated with non-slip ends are the preferred characteristics for a curette handle. These considerations may assist both manufacturers in designing new hand instruments and clinicians in selecting the most ergonomic ones to buy.

  3. New fermions in the bulk

    CERN Document Server

    de Brito, K P S

    2016-01-01

    Spinor fields on 5-dimensional Lorentzian manifolds are classified, according to the geometric Fierz identities that involve their bilinear covariants. Based upon this classification that generalises the celebrated 4-dimensional Lounesto classification of spinor fields, new non-trivial classes of 5-dimensional spinor fields are, hence, found, with important potential applications regarding bulk fermions and their subsequent localisation on brane-worlds. In addition, quaternionic bilinear covariants are used to derive the quaternionic spin density, through the truncated exterior bundle. In order to accomplish a realisation of these new spinors, a Killing vector field is constructed on the horizon of 5-dimensional Kerr black holes. This Killing vector field is shown to reach the time-like Killing vector field at the spatial infinity, through a current 1-form density, constructed with the derived new spinor fields. The current density is, moreover, expressed as the f\\"unfbein components, assuming a condensed for...

  4. New fermions in the bulk

    Science.gov (United States)

    de Brito, K. P. S.; da Rocha, Roldão

    2016-10-01

    The spinor fields on 5-dimensional Lorentzian manifolds are classified according to the geometric Fierz identities, which involve their bilinear covariants. Based upon this classification, which generalises the celebrated 4-dimensional Lounesto classification of spinor fields, new non-trivial classes of 5-dimensional spinor fields are hence found, with important potential applications regarding bulk fermions and their subsequent localisation on brane-worlds. In addition, quaternionic bilinear covariants are used to derive the quaternionic spin density through the truncated exterior bundle. In order to accomplish the realisation of these new spinors, a Killing vector field is constructed on the horizon of a 5-dimensional Kerr black hole. This Killing vector field is shown to reach the time-like Killing vector field at spatial infinity through a current 1-form density, constructed with the new derived spinor fields. The current density is, moreover, expressed as the fünfbein component, assuming a condensed form.

  5. Nanofluidics, from bulk to interfaces.

    Science.gov (United States)

    Bocquet, Lydéric; Charlaix, Elisabeth

    2010-03-01

    Nanofluidics has emerged recently in the footsteps of microfluidics, following the quest for scale reduction inherent to nanotechnologies. By definition, nanofluidics explores transport phenomena of fluids at nanometer scales. Why is the nanometer scale specific? What fluid properties are probed at nanometric scales? In other words, why does 'nanofluidics' deserve its own brand name? In this critical review, we will explore the vast manifold of length scales emerging for fluid behavior at the nanoscale, as well as the associated mechanisms and corresponding applications. We will in particular explore the interplay between bulk and interface phenomena. The limit of validity of the continuum approaches will be discussed, as well as the numerous surface induced effects occurring at these scales, from hydrodynamic slippage to the various electro-kinetic phenomena originating from the couplings between hydrodynamics and electrostatics. An enlightening analogy between ion transport in nanochannels and transport in doped semi-conductors will be discussed (156 references).

  6. Solid Matter

    CERN Document Server

    Angelo, Joseph A

    2011-01-01

    Supported by a generous quantity of full-color illustrations and interesting sidebars, Solid Matter introduces the basic characteristics and properties of solid matter. It briefly describes the cosmic connection of the elements, leading readers through several key events in human pre-history that resulted in more advanced uses of matter in the solid state. Chapters include:. -Solid Matter: An Initial Perspective. -Physical Behavior of Matter. -The Gravity of Matter. -Fundamentals of Materials Science. -Rocks and Minerals. -Metals. -Building Materials. -Carbon Earth's Most Versatile Element. -S

  7. Extreme Water: Characterizing Exoplanets with Excess Bulk Water Interiors

    Science.gov (United States)

    Sasselov, Dimitar

    2015-12-01

    A number of planets with radii of 1 - 2.5 Earth radius have measured mean densities that allow more than 20% of their bulk interior to be composed of water. How do planets with solid-state water mantles modulate the fluxes of gases reaching the surface? What should we expect about the composition of their evolved atmospheres? I review theoretical models of the interiors and near-surface layers that constrain the fluxes of major gases (in and out) and resulting atmospheric compositions. The results have implications for observational characterization of rocky versus water planets, when the density alone is not enough, as well as the search for biosignatures and habitability.

  8. Prediction of the discharge trajectories of bulk materials

    Energy Technology Data Exchange (ETDEWEB)

    Golka, K. (Pacific Power, Sydney, NSW (Australia))

    1993-11-01

    The theory of discharge trajectories of granular materials without cohesion and adhesion from material handling equipment is reviewed in terms of its application within the design process. Theoretical formulae of discharge trajectories are provided for underside and topside limits of the bulk material path. The fundamental force, velocity, and the continuity-flow relationships, are the main factors used in describing the material's trajectory functions. The analytical functions developed are for kinematic material stream conditions when discharging from: (a) head pulleys of belt conveyors; (b) chutes and cross belt samplers. To predict the trajectory path for real conditions, divergent coefficients have been introduced to the theoretical functions. Computer calculations and graphical representations indicate how the theoretical approach can be useful for practical design. 10 refs., 6 figs.

  9. Development of hydrazinium nitroformate based solid propellants

    NARCIS (Netherlands)

    Schöyer, H.F.R.; Schnorhk, A.J.; Korting, P.A.O.G.; Lit, P.J. van; Mul, J.M.; Gadiot, G.; Meulenbrugge, J.J.

    1995-01-01

    The development of new high-performance propellant combinations requires the establishment of safety and handling characteristics and thermodynamic decomposition and explosive properties. This paper addresses the early development phases of a new composite solid propellant based on HNF as oxidizer a

  10. Remote-handled transuranic system assessment appendices. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

  11. Remote-handled transuranic system assessment appendices. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    Volume 2 of this report contains six appendices to the report: Inventory and generation of remote-handled transuranic waste; Remote-handled transuranic waste site storage; Characterization of remote-handled transuranic waste; RH-TRU waste treatment alternatives system analysis; Packaging and transportation study; and Remote-handled transuranic waste disposal alternatives.

  12. 30 CFR 77.1303 - Explosives, handling and use.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosives, handling and use. 77.1303 Section... MINES Explosives and Blasting § 77.1303 Explosives, handling and use. (a) Persons who use or handle... treated and handled with the same safety precautions as blasting caps and electric detonators. (o) Capped...

  13. Efficient compensation handling via subjective updates

    NARCIS (Netherlands)

    J. Dedeić (Jovana); J. Pantović (Jovanka); J.A. Pérez Parra (Jorge)

    2017-01-01

    textabstractProgramming abstractions for compensation handling and dynamic update are crucial in specifying reliable interacting systems, such as Collective Adaptive Systems (CAS). Compensations and updates both specify how a system reacts in response to exceptional events. Prior work showed that

  14. CLINICAL WASTE HANDLING AND OBSTACLES IN MALAYSIA

    Directory of Open Access Journals (Sweden)

    Shaidatul Shida Razali

    2010-12-01

    Full Text Available As in many other developing countries, the generation of clinical waste in Malaysia has increased significantly over the last few decades. Even though the serious impact of the clinical waste on human beings and the environment is significant, only minor attention is directed to its proper handling and legal aspects. This study seeks to examine the management of clinical waste in Selangor’s government hospitals as well as problems that arise from the current practice of clinical waste management. A depth interview with the responsible concession who handles the clinical waste management in those hospitals also has been taken. In general, it was found that the consortium’s administration was reasonably aware of the importance of clinical waste management. However, significant voids were presented that need to be addressed in future including efficient segregation, better handling and transfer means, as well as the need for training and awareness programs for the personnel. Other obstacles faced by consortiums were to handle the clinical waste including the operational costs. Waste minimizing and recycling, as well as the alternative treatment methods for incineration are regarded to be major challenges in the future.

  15. Confluence Modulo Equivalence in Constraint Handling Rules

    DEFF Research Database (Denmark)

    Christiansen, Henning; Kirkeby, Maja Hanne

    2014-01-01

    Previous results on confluence for Constraint Handling Rules, CHR, are generalized to take into account user-defined state equivalence relations. This allows a much larger class of programs to enjoy the ad- vantages of confluence, which include various optimization techniques and simplified corre...

  16. Materials handling centre: making business more efficient

    NARCIS (Netherlands)

    B. Bollen (Brian)

    2012-01-01

    textabstractThe aim of the Materials Handling Forum at RSM is to narrow the gap between research and practice by promoting and disseminating academic knowledge, sharing innovative ideas, generating research questions, and co-developing new research themes with industry partners.

  17. Waiting on More than 64 Handles

    Science.gov (United States)

    2015-10-01

    parameter stuct is comprised of an array of handles with a maximum size of MAX_WAIT_OBJECTS and an integer holding the total quantity. Once all the...GIDEP Operations Center P.O. Box 8000 Corona , CA 91718-8000 gidep@gidep.org UNCLASSIFIED Approved for public release; distribution is unlimited. 4 Patricia Alameda Patricia Alameda Andrew Pskowski

  18. Biodiesel Handling and Use Guide (Fifth Edition)

    Energy Technology Data Exchange (ETDEWEB)

    Alleman, Teresa L.; McCormick, Robert L.; Christensen, Earl D.; Fioroni, Gina; Moriarty, Kristi; Yanowitz, Janet

    2016-11-08

    This document is a guide for those who blend, distribute, and use biodiesel and biodiesel blends. It provides basic information on the proper and safe use of biodiesel and biodiesel blends in engines and boilers, and is intended to help fleets, individual users, blenders, distributors, and those involved in related activities understand procedures for handling and using biodiesel fuels.

  19. Australia: round module handling and cotton classing

    Science.gov (United States)

    Round modules of seed cotton produced via on-board module building harvesters are the reality of the cotton industry, worldwide. Although round modules have been available to the industry for almost a decade, there is still no consensus on the best method to handle the modules, particularly when th...

  20. Laboratory rearing and handling of cerambycids

    Science.gov (United States)

    Melody A. Keena

    2017-01-01

    Lack of suitable rearing and handling techniques has hampered research on the biology and control of many species of cerambycids that feed on host species of economic importance. Furthermore, because cerambycids spend most or all of their pre-adult life cycle inside the host plant, the biology of many is not well-known and would be dif

  1. Intertextuality for Handling Complex Environmental Issues

    Science.gov (United States)

    Byhring, Anne Kristine; Knain, Erik

    2016-01-01

    Nowhere is the need for handling complexity more pertinent than in addressing environmental issues. Our study explores students' situated constructs of complexity in unfolding discourses on socio-scientific issues. Students' dialogues in two group-work episodes are analysed in detail, with tools from Systemic Functional Linguistics. We identify…

  2. Railcar handling systems - designs for individual solutions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The article examines the latest state of the art developments in railcar handling technology, with profiles of leading equipment suppliers in this field and recent projects completed worldwide. Equipment covered includes: railcar discharge systems; rotary dumpers; side discharge dumpers; and railcar loading systems. 2 figs., 7 photos.

  3. 7 CFR 915.10 - Handle.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 915.10 Section 915.10 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... prepared for market. In the event a grower sells his avocados to a handler who is not so registered...

  4. 340 Waste handling facility interim safety basis

    Energy Technology Data Exchange (ETDEWEB)

    Stordeur, R.T.

    1996-10-04

    This document presents an interim safety basis for the 340 Waste Handling Facility classifying the 340 Facility as a Hazard Category 3 facility. The hazard analysis quantifies the operating safety envelop for this facility and demonstrates that the facility can be operated without a significant threat to onsite or offsite people.

  5. 340 waste handling facility interim safety basis

    Energy Technology Data Exchange (ETDEWEB)

    VAIL, T.S.

    1999-04-01

    This document presents an interim safety basis for the 340 Waste Handling Facility classifying the 340 Facility as a Hazard Category 3 facility. The hazard analysis quantifies the operating safety envelop for this facility and demonstrates that the facility can be operated without a significant threat to onsite or offsite people.

  6. Intertextuality for Handling Complex Environmental Issues

    Science.gov (United States)

    Byhring, Anne Kristine; Knain, Erik

    2016-01-01

    Nowhere is the need for handling complexity more pertinent than in addressing environmental issues. Our study explores students' situated constructs of complexity in unfolding discourses on socio-scientific issues. Students' dialogues in two group-work episodes are analysed in detail, with tools from Systemic Functional Linguistics. We identify…

  7. Goods handling: tugs, trailers and tractors.

    Science.gov (United States)

    Grayson, H

    1980-09-26

    Ease of handling ought to be a priority in any supply and disposal system. Hazel Grayson, senior research officer at the Medical Architecture Research Unit, Polytechnic of North London, suggests that even where driver-operated electric tow tractors cannot be used, other types of electric pulling device should be considered.

  8. 'Safe handling of nanotechnology' ten years on

    Science.gov (United States)

    Maynard, Andrew D.; Aitken, Robert J.

    2016-12-01

    In 2006, a group of scientists proposed five grand challenges to support the safe handling of nanotechnology. Ten years on, Andrew Maynard and Robert Aitken -- two of the original authors -- look at where we have come, and where we still need to go.

  9. Caution required for handling genome editing technology.

    Science.gov (United States)

    Araki, Motoko; Nojima, Kumie; Ishii, Tetsuya

    2014-05-01

    Genome-editing technology, although a robust tool for genetic engineering, is creating indistinct regulatory boundaries between naturally occurring and modified organisms. However, researchers must act with caution in research and development to avoid misleading society. Furthermore, appropriate regulations should be proactively discussed and established for handling genome-editing technology.

  10. Tips for Handling Gourds this Fall Season

    OpenAIRE

    Bratsch, Tony

    2009-01-01

    Each year, more direct market and wholesale growers are adding gourds to their fall sales mix, along with pumpkins, ornamental corn and fall mums. Proper harvest timing, handling and curing are important to ensure maximum longevity of gourds once the consumer brings them home.

  11. Instrumentation to handle thermal polarized neutron beams

    NARCIS (Netherlands)

    Kraan, W.H.

    2004-01-01

    In this thesis we investigate devices needed to handle the polarization of thermal neutron beams: Ï/2-flippers (to start/stop Larmor precession) and Ï-flippers (to reverse polarization/precession direction) and illustrate how these devices are used to investigate the properties of matter and of the

  12. Ergonomics intervention in manual handling of oxygen

    Directory of Open Access Journals (Sweden)

    M Motamedzadeh

    2013-05-01

    Conclusion: With the implementation of ergonomic intervention is casting unit, the risk of exposure to musculoskeletal disorders caused by manual handling of oxygen cylinders was eliminated and safety of employees against the risk of explosion of the cylinders in comparison with before the intervention was improved.

  13. Handling Sparse Data by Successive Abstraction

    CERN Document Server

    Samuelsson, C

    1996-01-01

    A general, practical method for handling sparse data that avoids held-out data and iterative reestimation is derived from first principles. It has been tested on a part-of-speech tagging task and outperformed (deleted) interpolation with context-independent weights, even when the latter used a globally optimal parameter setting determined a posteriori.

  14. 7 CFR 920.11 - Handle.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 920.11 Section 920.11 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE KIWIFRUIT GROWN IN CALIFORNIA...

  15. 7 CFR 955.7 - Handle.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Handle. 955.7 Section 955.7 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN GEORGIA...

  16. Solid Waste Reduction--A Hands-on Study.

    Science.gov (United States)

    Wiessinger, Diane

    1991-01-01

    This lesson plan uses grocery shopping to demonstrate the importance of source reduction in the handling of solid waste problems. Students consider different priorities in shopping (convenience, packaging, and waste reduction) and draw conclusions about the relationship between packaging techniques and solid waste problems. (MCO)

  17. Data handling and representation of freeform surfaces

    Science.gov (United States)

    Steinkopf, Ralf; Dick, Lars; Kopf, Tino; Gebhardt, Andreas; Risse, Stefan; Eberhardt, Ramona

    2011-10-01

    Freeform surfaces enable innovative optics. They are not limited by axis symmetry and hence they are almost free in design. They are used to reduce the installation space and enhance the performance of optical elements. State of the art optical design tools are computing with powerful algorithms to simulate freeform surfaces. Even new mathematical approaches are under development /1/. In consequence, new optical designs /2/ are pushing the development of manufacturing processes consequently and novel types of datasets have to proceed through the process chain /3/. The complexity of these data is the huge challenge for the data handling. Because of the asymmetrical and 3-dimensional surfaces of freeforms, large data volumes have to be created, trimmed, extended and fitted. All these processes must be performed without losing the accuracy of the original design data. Additionally, manifold types of geometries results in different kinds of mathematical representations of freeform surfaces and furthermore the used CAD/CAM tools are dealing with a set of spatial transport formats. These are all reasons why manufacture-oriented approaches for the freeform data handling are not yet sufficiently developed. This paper suggests a classification of freeform surfaces based on the manufacturing methods which are offered by diamond machining. The different manufacturing technologies, ranging from servo-turning to shaping, require a differentiated approach for the data handling process. The usage of analytical descriptions in form of splines and polynomials as well as the application of discrete descriptions like point clouds is shown in relation to the previously made classification. Advantages and disadvantages of freeform representations are discussed. Aspects of the data handling in between different process steps are pointed out and suitable exchange formats for freeform data are proposed. The described approach offers the possibility for efficient data handling from optical

  18. Handling Qualities Evaluation of Pilot Tools for Spacecraft Docking in Earth Orbit

    Science.gov (United States)

    Bilimoria, Karl D.; Mueller, Eric; Frost, Chad

    2009-01-01

    A new generation of spacecraft is now under development by NASA to replace the Space Shuttle and return astronauts to the Moon. These spacecraft will have a manual control capability for several mission tasks, and the ease and precision with which pilots can execute these tasks will have an important effect on mission risk and training costs. This paper focuses on the handling qualities of a spacecraft based on dynamics similar to that of the Crew Exploration Vehicle, during the last segment of the docking task with a space station in low Earth orbit. A previous study established that handling qualities for this task degrade significantly as the level of translation-into-rotation coupling increases. The goal of this study is to evaluate the efficacy of various pilot aids designed to mitigate the handling qualities degradation caused by this coupling. Four pilot tools were ev adluaetead:d-band box/indicator, flight-path marker, translation guidance cues, and feed-forward control. Each of these pilot tools improved handling qualities, generally with greater improvements resulting from using these tools in combination. A key result of this study is that feedforward control effectively counteracts coupling effects, providing solid Level 1 handling qualities for the spacecraft configuration evaluated.

  19. Handling complex effects in slurry-sampling-electrothermal atomic absorption spectrometry by multivariate calibration

    Energy Technology Data Exchange (ETDEWEB)

    Felipe-Sotelo, M. [Dept. Analytical Chemistry. University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Cal-Prieto, M.J. [Dept. Analytical Chemistry. University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Gomez-Carracedo, M.P. [Dept. Analytical Chemistry. University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Andrade, J.M. [Dept. Analytical Chemistry. University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain)]. E-mail: andrade@udc.es; Carlosena, A. [Dept. Analytical Chemistry. University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain); Prada, D. [Dept. Analytical Chemistry. University of A Coruna, Campus da Zapateira s/n, E-15071 A Coruna (Spain)

    2006-07-07

    Analysis of solid samples by slurry-sampling-electrothermal atomic absorption spectrometry (SS-ETAAS) can imply spectral and chemical interferences caused by the large amount of concomitants introduced into the graphite furnace. Sometimes they cannot be solved using stabilized temperature platform furnace (STPF) conditions or typical approaches (previous sample ashing, use of chemical modifiers, etc.), which are time consuming and quite expensive. A new approach to handle interferences using multivariate calibrations (partial least squares, PLS, and artificial neural networks, ANN) is presented and exemplified with a real problem consisting on determining Sb in several solid matrices (soils, sediments and coal fly ash) as slurries by ETAAS. Experimental designs were implemented at different levels of Sb to develop the calibration matrix and assess which concomitants (seven ions were considered) modified the atomic signal mostly. They were Na{sup +} and Ca{sup 2+} and they induced simultaneous displacement, depletion (enhancement) and broadening of the atomic peak. Here it is shown that these complex effects can be handled in a reliable, fast and cost-effective way to predict the concentration of Sb in slurry samples of several solid matrices. The method was validated predicting the concentrations of five certified reference materials (CRMs) and studying its robustness to current ETAAS problems. It is also shown that linear PLS can handle eventual non-linearities and that its results are comparable to more complex (non-linear) models, as those from ANNs.

  20. Carrier Bulk-Lifetime Measurements

    Directory of Open Access Journals (Sweden)

    M. Solcansky

    2012-01-01

    Full Text Available For the measurement of the minority carrier bulk-lifetime the characterization method MW-PCD is used, where the result of measurement is the effective carrier lifetime, which is very dependent on the surface recombination velocity and therefore on the quality of a silicon surface passivation. This work deals with an examination of a different solution types for the chemical passivation of a silicon surface. Various solutions are tested on silicon wafers for their consequent comparison. The main purpose is to find optimal solution, which suits the requirements of a time stability and start-up velocity of passivation, reproducibility of the measurements and a possibility of a perfect cleaning of a passivating solution remains from a silicon surface, so that the parameters of a measured silicon wafer will not worsen and there will not be any contamination of the other wafers series in the production after a repetitive return of the measured wafer into the production process. The cleaning process itself is also a subject of a development.

  1. Coupling brane fields to bulk supergravity

    Energy Technology Data Exchange (ETDEWEB)

    Parameswaran, Susha L. [Uppsala Univ. (Sweden). Theoretical Physics; Schmidt, Jonas [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2010-12-15

    In this note we present a simple, general prescription for coupling brane localized fields to bulk supergravity. We illustrate the procedure by considering 6D N=2 bulk supergravity on a 2D orbifold, with brane fields localized at the fixed points. The resulting action enjoys the full 6D N=2 symmetries in the bulk, and those of 4D N=1 supergravity at the brane positions. (orig.)

  2. Relative entropy equals bulk relative entropy

    CERN Document Server

    Jafferis, Daniel L; Maldacena, Juan; Suh, S Josephine

    2015-01-01

    We consider the gravity dual of the modular Hamiltonian associated to a general subregion of a boundary theory. We use it to argue that the relative entropy of nearby states is given by the relative entropy in the bulk, to leading order in the bulk gravitational coupling. We also argue that the boundary modular flow is dual to the bulk modular flow in the entanglement wedge, with implications for entanglement wedge reconstruction.

  3. A Knowledge-Based Approach for Selection of Material Handling Equipment and Material Handling System Pre-design

    OpenAIRE

    YAMAN, Ramazan

    2001-01-01

    For material handling system design, material handling equipment selection is the first stage. Also the material handling system and facility layout design problems are coupled. Solving these problems needs consideration of these three different problems. Right material handling equipment selection and good design of the material handling system and facility layout can increase productivity and reduce investments and operations' costs. In this study, after describing the m...

  4. Applications of bulk high-temperature superconductors

    Science.gov (United States)

    Hull, J. R.

    The development of high-temperature superconductors (HTS's) can be broadly generalized into thin-film electronics, wire applications, and bulk applications. We consider bulk HTS's to include sintered or crystallized forms that do not take the geometry of filaments or tapes, and we discuss major applications for these materials. For the most part applications may be realized with the HTS's cooled to 77 K, and the properties of the bulk HTS's are often already sufficient for commercial use. A non-exhaustive list of applications for bulk HTS's includes trapped field magnets, hysteresis motors, magnetic shielding, current leads, and magnetic bearings. These applications are briefly discussed in this paper.

  5. Hyperon bulk viscosity in strong magnetic fields

    CERN Document Server

    Sinha, Monika

    2008-01-01

    We study bulk viscosity in neutron star matter including $\\Lambda$ hyperons in the presence of quantizing magnetic fields. Relaxation time and bulk viscosity due to both the non-leptonic weak process involving $\\Lambda$ hyperons and the direct Urca (dUrca) process are calculated here. In the presence of a strong magnetic field, bulk viscosity coefficients are enhanced when protons, electrons and muons are populated in their respective zeroth Landau levels compared with the field free cases. The enhancement of bulk viscosity coefficient is larger for the dUrca case.

  6. Waste Handling and Emplacement Options for Disposal of Radioactive Waste in Deep Boreholes.

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, John R.; Hardin, Ernest

    2015-11-01

    Traditional methods cannot be used to handle and emplace radioactive wastes in boreholes up to 16,400 feet (5 km) deep for disposal. This paper describes three systems that can be used for handling and emplacing waste packages in deep borehole: (1) a 2011 reference design that is based on a previous study by Woodward–Clyde in 1983 in which waste packages are assembled into “strings” and lowered using drill pipe; (2) an updated version of the 2011 reference design; and (3) a new concept in which individual waste packages would be lowered to depth using a wireline. Emplacement on coiled tubing was also considered, but not developed in detail. The systems described here are currently designed for U.S. Department of Energy-owned high-level waste (HLW) including the Cesium- 137/Strontium-90 capsules from the Hanford Facility and bulk granular HLW from fuel processing in Idaho.

  7. Solid consistency

    Science.gov (United States)

    Bordin, Lorenzo; Creminelli, Paolo; Mirbabayi, Mehrdad; Noreña, Jorge

    2017-03-01

    We argue that isotropic scalar fluctuations in solid inflation are adiabatic in the super-horizon limit. During the solid phase this adiabatic mode has peculiar features: constant energy-density slices and comoving slices do not coincide, and their curvatures, parameterized respectively by ζ and Script R, both evolve in time. The existence of this adiabatic mode implies that Maldacena's squeezed limit consistency relation holds after angular average over the long mode. The correlation functions of a long-wavelength spherical scalar mode with several short scalar or tensor modes is fixed by the scaling behavior of the correlators of short modes, independently of the solid inflation action or dynamics of reheating.

  8. 40 CFR 264.314 - Special requirements for bulk and containerized liquids.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE.... (a) The placement of bulk or non-containerized liquid hazardous waste or hazardous waste containing...) The placement of any liquid which is not a hazardous waste in a landfill is prohibited unless the...

  9. Perovskite-type oxides - Oxygen electrocatalysis and bulk structure

    Science.gov (United States)

    Carbonio, R. E.; Fierro, C.; Tryk, D.; Scherson, D.; Yeager, E.

    1988-01-01

    Perovskite type oxides were considered for use as oxygen reduction and generation electrocatalysts in alkaline electrolytes. Perovskite stability and electrocatalytic activity are studied along with possible relationships of the latter with the bulk solid state properties. A series of compounds of the type LaFe(x)Ni1(-x)O3 was used as a model system to gain information on the possible relationships between surface catalytic activity and bulk structure. Hydrogen peroxide decomposition rate constants were measured for these compounds. Ex situ Mossbauer effect spectroscopy (MES), and magnetic susceptibility measurements were used to study the solid state properties. X ray photoelectron spectroscopy (XPS) was used to examine the surface. MES has indicated the presence of a paramagnetic to magnetically ordered phase transition for values of x between 0.4 and 0.5. A correlation was found between the values of the MES isomer shift and the catalytic activity for peroxide decomposition. Thus, the catalytic activity can be correlated to the d-electron density for the transition metal cations.

  10. Structure and physical properties of silicon clusters and of vacancy clusters in bulk silicon

    CERN Document Server

    Sieck, A

    2000-01-01

    different from the solid. The calculated stabilities and positron-lifetimes of vacancy clusters in bulk silicon indicate the positron-lifetimes of about 435 ps detected in irradiated silicon to be related to clusters of 9 or 10 vacancies. The vacancies in these clusters form neighboring hexa-rings and, therefore, minimize the number of dangling bonds. In this thesis the growth-pattern of free silicon clusters and vacancy clusters in bulk silicon is investigated. The aim is to describe and to better understand the cluster to bulk transition. Silicon structures in between clusters and solids feature new interesting physical properties. The structure and physical properties of silicon clusters can be revealed by a combination of theory and experiment, only. Low-energy clusters are determined with different optimization techniques and a density-functional based tight-binding method. Additionally, infrared and Raman spectra, and polarizabilities calculated within self-consistent field density-functional theory are...

  11. Analysis of aircraft longitudinal handling qualities

    Science.gov (United States)

    Hess, R. A.

    1981-01-01

    The optimal control model (OCM) of the human pilot is applied to the study of aircraft handling qualities. Attention is focused primarily on longitudinal tasks. The modeling technique differs from previous applications of the OCM in that considerable effort is expended in simplifying the pilot/vehicle analysis. After briefly reviewing the OCM, a technique for modeling the pilot controlling higher order systems is introduced. Following this, a simple criterion for determining the susceptibility of an aircraft to pilot induced oscillations (PIO) is formulated. Finally, a model-based metric for pilot rating prediction is discussed. The resulting modeling procedure provides a relatively simple, yet unified approach to the study of a variety of handling qualities problems.

  12. Energy efficiency in air handling applications

    Energy Technology Data Exchange (ETDEWEB)

    Fontaine, P. [Australian Baldor (Australia)

    1995-07-01

    It is estimated that the cost of air handling in a typical office building is $25,000 to $60,000 per 10,000 sq metres. New technologies are now available to reduce this by 50 percent with an investment that is recoverable within two years. Old systems of air handling operated at full speed with flow rates changed by mechanical vanes or dampers. The excess capacity generated is wasting energy which could be saved using modern motor controls that match the system output with actual needs. Comparisons of relative energy consumptions of different fan flow control methods show that the more time a system spends throttled down, the better candidate it is for the more efficient Variable Speed Drive (VSD) device which matches the motor`s speed to actual needs. The use of VSD instead of vanes and dampers reduces operating costs which impacts directly on profitability. 2 tables, 1 fig.

  13. Handling System for Iridium-192 Seeds

    Science.gov (United States)

    Carpenter, W.; Wodicka, D.

    1973-01-01

    A complete system is proposed for safe handling of iridium-192 seeds used to internally irradiate malignant growths. A vibratory hopper feeds the seeds onto a transport system for deposit in a magazine or storage area. A circular magazine consisting of segmented plastic tubing with holes in the walls to accommodate the seeds seems feasible. The magazine is indexed to stop and release a seed for calibration and deposition.

  14. NB Power`s fish handling facilities

    Energy Technology Data Exchange (ETDEWEB)

    Hickman, C. N. [New Brunswick Power, Fredericton, NB (Canada)

    1995-12-31

    Fish handling facilities at the various hydroelectric power generating stations of New Brunswick Power on the St. John River, were described. The facilities described included the fish hoist at the Beechwood Generating Station , the fish ladder at the Tobique Generating Station and a trap and truck operation at the Mactaquac Station. Details of operating arrangements were provided. Operating issues, solutions and ongoing efforts to improve operations further, were discussed. 4 refs., 4 figs.

  15. Reactions and interactions in handling anticancer drugs.

    Science.gov (United States)

    D'Arcy, P F

    1983-01-01

    The clinical toxicity of anticancer drugs has been well documented with regard to the adverse effects of treatment in patients. However, many of these drugs have a direct irritant effect on the skin, eyes, mucous membranes, and other tissues. Handled without due care, especially when being prepared for injection, most cytotoxic drugs can cause local toxic or allergic reactions; they also present hazards of carcinogenicity and mutagenicity. This spectrum of potential risk should be kept in mind by personnel administering or handling these drugs, especially in oncology units where just a few individuals may routinely and frequently reconstitute many doses of cytotoxic agents. This is work in which the hospital pharmacist should and must be involved; indeed, many of the techniques and skills required are identical with those used in standard aseptic procedures for preparing pharmaceutical products. Pharmacy departments should take the initiative in making hospital staff aware of the potential risks of handling neoplastic agents, and they should spearhead a multidisciplinary assessment for producing local guidelines for working with these drugs. This article warns practitioners about the inherent dangers of these practitioner-drug interactions and suggests ways in which they may be reduced. Information is given in tabular form regarding recommended procedures for reconstituting 24 anticancer drugs and precautions to protect the personnel handling them, especially when there is spillage of powdered or liquid drugs. Also, guidelines are given about incompatibilities with admixtures of such drugs, and the literature is reviewed relative to recent developments in hospital pharmacy departments where reconstitution of anticancer drugs has been incorporated into existing intravenous fluid preparation/admixture units. Not only has this been shown to be safer and more effective in terms of time and labor, but also it has cut the cost of injectable cytotoxic drugs by an

  16. Browsing TAP Services with TapHandle

    Science.gov (United States)

    Louys, M.; Michel, L.; Mantelet, G.; Bonnarel, F.

    2012-09-01

    TapHandle is a Web application merging multiple services based on the IVOA Table Access Protocol (TAP) in one page. TAP resources are presented in an expandable tree whose leaves represent SQL tables. Both table description and content can be immediately displayed. A smart ADQL editor helps to setup queries on one table. A shopping cart facility allows users to get data of interest. A filter enriches the data layout with anchors pointing to remote services.

  17. Statistical methods for handling incomplete data

    CERN Document Server

    Kim, Jae Kwang

    2013-01-01

    ""… this book nicely blends the theoretical material and its application through examples, and will be of interest to students and researchers as a textbook or a reference book. Extensive coverage of recent advances in handling missing data provides resources and guidelines for researchers and practitioners in implementing the methods in new settings. … I plan to use this as a textbook for my teaching and highly recommend it.""-Biometrics, September 2014

  18. Development of spent fuel remote handling technology

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Ji Sup; Park, B. S.; Park, Y. S.; Oh, S. C.; Kim, S. H.; Cho, M. W.; Hong, D. H

    1997-12-01

    Since the nation`s policy on spent fuel management is not finalized, the technical items commonly required for safe management and recycling of spent fuel - remote technologies of transportation, inspection, maintenance, and disassembly of spent fuel - are selected and pursued. In this regards, the following R and D activities are carried out : collision free transportation of spent fuel assembly, mechanical disassembly of spent nuclear fuel and graphical simulation of fuel handling / disassembly process. (author). 36 refs., 16 tabs., 77 figs

  19. Characterization of precision of a handling system in high performance transfer press for micro forming

    DEFF Research Database (Denmark)

    Mahshid, Rasoul; Hansen, Hans Nørgaard; Arentoft, Mogens

    2014-01-01

    Multi-step micro bulk forming is characterized by complex processes and high precision requirements. In particular the demands regarding handling accuracy between different forming steps are of the order of a few mm. The paper introduces a methodology for the analysis and characterization...... of this transfer system on component level and system level. Laser interferometry is used in combination with analytical models to predict the positioning ability of the actuator in a static as well as dynamic mode. In combination with an analysis of the grippers, a full description of the transfer precision...

  20. Remote handling systems for the Pride application

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-10-15

    In this paper is described the development of remote handling systems for use in the pyro processing technology development. Remote handling systems mainly include a BDSM (Bridge transported Dual arm Servo-Manipulator) and a simulator, all of which will be applied to the Pride (Pyro process integrated inactive demonstration facility) that is under construction at KAERI. BDMS that will traverse the length of the ceiling is designed to have two pairs of master-slave manipulators of which each pair of master-slave manipulators has a kinematic similarity and a force reflection. A simulator is also designed to provide an efficient means for simulating and verifying the conceptual design, developments, arrangements, and rehearsal of the pyro processing equipment and relevant devices from the viewpoint of remote operation and maintenance. In our research is presented activities and progress made in developing remote handling systems to be used for the remote operation and maintenance of the pyro processing equipment and relevant devices in the Pride. (Author)

  1. Renal sodium handling and sodium sensitivity

    Directory of Open Access Journals (Sweden)

    Alissa A. Frame

    2017-06-01

    Full Text Available The pathophysiology of hypertension, which affects over 1 billion individuals worldwide, involves the integration of the actions of multiple organ systems, including the kidney. The kidney, which governs sodium excretion via several mechanisms including pressure natriuresis and the actions of renal sodium transporters, is central to long term blood pressure regulation and the salt sensitivity of blood pressure. The impact of renal sodium handling and the salt sensitivity of blood pressure in health and hypertension is a critical public health issue owing to the excess of dietary salt consumed globally and the significant percentage of the global population exhibiting salt sensitivity. This review highlights recent advances that have provided new insight into the renal handling of sodium and the salt sensitivity of blood pressure, with a focus on genetic, inflammatory, dietary, sympathetic nervous system and oxidative stress mechanisms that influence renal sodium excretion. Increased understanding of the multiple integrated mechanisms that regulate the renal handling of sodium and the salt sensitivity of blood pressure has the potential to identify novel therapeutic targets and refine dietary guidelines designed to treat and prevent hypertension.

  2. D0 data handling operational experience

    Energy Technology Data Exchange (ETDEWEB)

    Lee Lueking et al.

    2003-08-11

    We report on the production experience of the D0 experiment at the Fermilab Tevatron, using the SAM data handling system with a variety of computing hardware configurations, batch systems, and mass storage strategies. We have stored more than 300 TB of data in the Fermilab Enstore mass storage system. We deliver data through this system at an average rate of more than 2 TB/day to analysis programs, with a substantial multiplication factor in the consumed data through intelligent cache management. We handle more than 1.7 Million files in this system and provide data delivery to user jobs at Fermilab on four types of systems: a reconstruction farm, a large SMP system, a Linux batch cluster, and a Linux desktop cluster. In addition, we import simulation data generated at 6 sites worldwide, and deliver data to jobs at many more sites. We describe the scope of the data handling deployment worldwide, the operational experience with this system, and the feedback of that experience.

  3. Improving Memory Error Handling Using Linux

    Energy Technology Data Exchange (ETDEWEB)

    Carlton, Michael Andrew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Blanchard, Sean P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Debardeleben, Nathan A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-07-25

    As supercomputers continue to get faster and more powerful in the future, they will also have more nodes. If nothing is done, then the amount of memory in supercomputer clusters will soon grow large enough that memory failures will be unmanageable to deal with by manually replacing memory DIMMs. "Improving Memory Error Handling Using Linux" is a process oriented method to solve this problem by using the Linux kernel to disable (offline) faulty memory pages containing bad addresses, preventing them from being used again by a process. The process of offlining memory pages simplifies error handling and results in reducing both hardware and manpower costs required to run Los Alamos National Laboratory (LANL) clusters. This process will be necessary for the future of supercomputing to allow the development of exascale computers. It will not be feasible without memory error handling to manually replace the number of DIMMs that will fail daily on a machine consisting of 32-128 petabytes of memory. Testing reveals the process of offlining memory pages works and is relatively simple to use. As more and more testing is conducted, the entire process will be automated within the high-performance computing (HPC) monitoring software, Zenoss, at LANL.

  4. Handle-attachments from nubia. A note

    Directory of Open Access Journals (Sweden)

    William CULICAN

    2009-10-01

    Full Text Available Information on the distinctive bronze handle - attachments in the shape of a pair of human hands has been painstakingly collected by Dr. E. Cuadrado in his Refertorio de los Recipientes Rituales metálicos con "Asas de Manos" de la Península Ibérica (Trabajos de Prehistoria XXI, Madrid 1966. There is little room to doubt that metal vessels with this form of handle, whether we regard them as braziers (braserillos in the older terminology or 'ritual vessels' as does Cuadrado, are related to the distribution of Phoenician or Punic trade and influence in the Iberian peninsula. The southerly 'Tartessian' distribution speaks for itself; for the western 'Levantine' distribution (from Murcia, Alicante, Valencia, Teruel, Tarragona, Málaga, Ibiza we can postulate Ibiza, Málaga or Cartagena as a probable distribution centre. The examples in the west central meseta (Sanchorreja, El Berrueco, La Osera come as no surprise in view of the fact that such obviously Phoenician objects as the Sanchorreja belt-buckle, the Berrueco bronzes reached the regions of Avila and Salamanca respectively. Even for the outlying spot on the hand-handle distribution map at Santa Olaya, the cèltic oppidum at the mouth of the River Mondego, a context of Phoenician trade is likely, since pottery of Carmona and later types was found there and is now in the museum at Figueira da Foz.

  5. Vestibule and Cask Preparation Mechanical Handling Calculation

    Energy Technology Data Exchange (ETDEWEB)

    N. Ambre

    2004-05-26

    The scope of this document is to develop the size, operational envelopes, and major requirements of the equipment to be used in the vestibule, cask preparation area, and the crane maintenance area of the Fuel Handling Facility. This calculation is intended to support the License Application (LA) submittal of December 2004, in accordance with the directive given by DOE correspondence received on the 27th of January 2004 entitled: ''Authorization for Bechtel SAIC Company L.L.C. to Include a Bare Fuel Handling Facility and Increased Aging Capacity in the License Application, Contract Number DE-AC28-01R W12101'' (Ref. 167124). This correspondence was appended by further correspondence received on the 19th of February 2004 entitled: ''Technical Direction to Bechtel SAIC Company L.L. C. for Surface Facility Improvements, Contract Number DE-AC28-01R W12101; TDL No. 04-024'' (Ref. 16875 1). These documents give the authorization for a Fuel Handling Facility to be included in the baseline. The limitations of this preliminary calculation lie within the assumptions of section 5 , as this calculation is part of an evolutionary design process.

  6. A comparison of observables for solid-solid phase transitions

    Energy Technology Data Exchange (ETDEWEB)

    Smilowitz, Laura B [Los Alamos National Laboratory; Henson, Bryan F [Los Alamos National Laboratory; Romero, Jerry J [Los Alamos National Laboratory

    2009-01-01

    The study of solid-solid phase transformations is hindered by the difficulty of finding a volumetric probe to use as a progress variable. Solids are typically optically opaque and heterogeneous. Over the past several years, second harmonic generation (SHG) has been used as a kinetic probe for a solid-solid phase transition in which the initial and final phases have different symmetries. Bulk generation of SHG is allowed by symmetry only in noncentrosymmetric crystallographic space groups. For the organic energetic nitramine octahydro-1,3 ,5,7 -tetranitro-1,3 ,5,7 -tatrazocine (HMX), the beta phase is centro symmetric (space group P2{sub 1}/c) and the delta phase iS noncentrosymmetric (space group P6{sub 1}22) making SHG an extremely sensitive, essentially zero background probe of the phase change progress. We have used SHG as a tool to follow the progress of the transformation from beta to delta phase during the solid-solid transformation. However, kinetic models of the transformation derived using different observables from several other groups have differed, showing later onset for the phase change and faster progression to completion. In this work, we have intercompared several techniques to understand these differences. The three techniques discussed are second harmonic generation, Raman spectroscopy, and differential scanning calorimetry (DSC). The progress of the beta to delta phase transition in HMX observed with each of these different probes will be discussed and advantages and disadvantages of each technique described. This paper compares several different observables for use in measuring the kinetics of solid-solid phase transitions. Relative advantages and disadvantages for each technique are described and a direct comparison of results is made for the beta to delta polymorphic phase transition of the energetic nitramine, octahydro-1,3,5,7-tetranitro-1,3,5,7-tatrazocine.

  7. CANISTER HANDLING FACILITY CRITICALITY SAFETY CALCULATIONS

    Energy Technology Data Exchange (ETDEWEB)

    C.E. Sanders

    2005-04-07

    This design calculation revises and updates the previous criticality evaluation for the canister handling, transfer and staging operations to be performed in the Canister Handling Facility (CHF) documented in BSC [Bechtel SAIC Company] 2004 [DIRS 167614]. The purpose of the calculation is to demonstrate that the handling operations of canisters performed in the CHF meet the nuclear criticality safety design criteria specified in the ''Project Design Criteria (PDC) Document'' (BSC 2004 [DIRS 171599], Section 4.9.2.2), the nuclear facility safety requirement in ''Project Requirements Document'' (Canori and Leitner 2003 [DIRS 166275], p. 4-206), the functional/operational nuclear safety requirement in the ''Project Functional and Operational Requirements'' document (Curry 2004 [DIRS 170557], p. 75), and the functional nuclear criticality safety requirements described in the ''Canister Handling Facility Description Document'' (BSC 2004 [DIRS 168992], Sections 3.1.1.3.4.13 and 3.2.3). Specific scope of work contained in this activity consists of updating the Category 1 and 2 event sequence evaluations as identified in the ''Categorization of Event Sequences for License Application'' (BSC 2004 [DIRS 167268], Section 7). The CHF is limited in throughput capacity to handling sealed U.S. Department of Energy (DOE) spent nuclear fuel (SNF) and high-level radioactive waste (HLW) canisters, defense high-level radioactive waste (DHLW), naval canisters, multicanister overpacks (MCOs), vertical dual-purpose canisters (DPCs), and multipurpose canisters (MPCs) (if and when they become available) (BSC 2004 [DIRS 168992], p. 1-1). It should be noted that the design and safety analyses of the naval canisters are the responsibility of the U.S. Department of the Navy (Naval Nuclear Propulsion Program) and will not be included in this document. In addition, this calculation is valid for

  8. Waste Handling Equipment Devleopment Test and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    R.L. Tome

    1998-12-01

    The purpose of this study is to identify candidate Monitored Geologic Repository (MGR) surface waste handling equipment for development testing. This study will also identify strategies for performing the development tests. Development testing shall be implemented to support detail design and reduce design risks. Development testing shall be conducted to confirm design concepts, evaluate alternative design concepts, show the availability of needed technology, and provide design documentation. The candidate equipment will be selected from MGR surface waste handling equipment that is the responsibility of the Management and Operating Contractor (M&O) Surface Design Department. The equipment identified in this study is based on Viability Assessment (VA) design. The ''Monitored Geologic Repository Test and Evaluation Plan'' (MGR T&EP), Reference 5.1, was used as a basis for this study. The MGR T&EP reflects the extent of test planning and analysis that can be conducted, given the current status of the MGR requirements and latest VA design information. The MGR T&EP supports the appropriate sections in the license application (LA) in accordance with 10 CFR 60.2 1(c)(14). The MGR T&EP describes the following test activities: site characterization to confirm, by test and analysis, the suitability of the Yucca Mountain site for housing a geologic repository; development testing to investigate and document design concepts to reduce risk; qualification testing to verify equipment compliance with design requirements, specifications, and regulatory requirements; system testing to validate compliance with MGR requirements, which include the receipt, handling, retrieval, and disposal of waste; periodic performance testing to verify preclosure requirements and to demonstrate safe and reliable MGR operation; and performance confirmation modeling, testing, and analysis to verify adherence to postclosure regulatory requirements. Development test activities can be

  9. 27 CFR 20.191 - Bulk articles.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bulk articles. 20.191... Users of Specially Denatured Spirits Operations by Users § 20.191 Bulk articles. Users who convey articles in containers exceeding one gallon may provide the recipient with a photocopy of subpart G of...

  10. Minor alloying behavior in bulk metallic glasses and high-entropy alloys

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The effect of minor alloying on several bulk metallic glasses and high-entropy al-loys was studied. It was found that minor Nb addition can optimize the interface structure between the W fiber and the Zr-based bulk metallic glass in the compos-ites,and improve the mechanical properties. Minor Y addition can destabilize the crystalline phases by inducing lattice distortion as a result to improve the glass-forming ability,and the lattice distortion energy is closely related to the effi-ciency of space filling of the competing crystalline phases. A long-period ordered structure can precipitate in the Mg-based bulk metallic glass by yttrium alloying. For the high-entropy alloys,solid solution can be formed by alloying,and its me-chanical properties can be comparable to most of the bulk metallic glasses.

  11. Bulk equations of motion from CFT correlators

    CERN Document Server

    Kabat, Daniel

    2015-01-01

    To O(1/N) we derive, purely from CFT data, the bulk equations of motion for interacting scalar fields and for scalars coupled to gauge fields and gravity. We first uplift CFT operators to mimic local AdS fields by imposing bulk microcausality. This requires adding an infinite tower of smeared higher-dimension double-trace operators to the CFT definition of a bulk field, with coefficients that we explicitly compute. By summing the contribution of the higher-dimension operators we derive the equations of motion satisfied by these uplifted CFT operators and show that we precisely recover the expected bulk equations of motion. We exhibit the freedom in the CFT construction which corresponds to bulk field redefinitions.

  12. Bulk equations of motion from CFT correlators

    Energy Technology Data Exchange (ETDEWEB)

    Kabat, Daniel [Department of Physics and Astronomy,Lehman College, City University of New York, Bronx NY 10468 (United States); Lifschytz, Gilad [Department of Physics and Astronomy,Lehman College, City University of New York, Bronx NY 10468 (United States); Physics Department,City College, City University of New York, New York NY 10031 (United States); Department of Mathematics and Physics,University of Haifa at Oranim, Kiryat Tivon 36006 (Israel)

    2015-09-10

    To O(1/N) we derive, purely from CFT data, the bulk equations of motion for interacting scalar fields and for scalars coupled to gauge fields and gravity. We first uplift CFT operators to mimic local AdS fields by imposing bulk microcausality. This requires adding an infinite tower of smeared higher-dimension double-trace operators to the CFT definition of a bulk field, with coefficients that we explicitly compute. By summing the contribution of the higher-dimension operators we derive the equations of motion satisfied by these uplifted CFT operators and show that we precisely recover the expected bulk equations of motion. We exhibit the freedom in the CFT construction which corresponds to bulk field redefinitions.

  13. Bulk Vitrification Castable Refractory Block Protection Study

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Beck, Andrew E.; Brouns, Thomas M.; Caldwell, Dustin D.; Elliott, Michael L.; Matyas, Josef; Minister, Kevin BC; Schweiger, Michael J.; Strachan, Denis M.; Tinsley, Bronnie P.; Hollenberg, Glenn W.

    2005-05-01

    Bulk vitrification (BV) was selected for a pilot-scale test and demonstration facility for supplemental treatment to accelerate the cleanup of low-activity waste (LAW) at the Hanford U.S. DOE Site. During engineering-scale (ES) tests, a small fraction of radioactive Tc (and Re, its nonradioactive surrogate) were transferred out of the LAW glass feed and molten LAW glass, and deposited on the surface and within the pores of the castable refractory block (CRB). Laboratory experiments were undertaken to understand the mechanisms of the transport Tc/Re into the CRB during vitrification and to evaluate various means of CRB protection against the deposition of leachable Tc/Re. The tests used Re as a chemical surrogate for Tc. The tests with the baseline CRB showed that the molten LAW penetrates into CRB pores before it converts to glass, leaving deposits of sulfates and chlorides when the nitrate components decompose. Na2O from the LAW reacts with the CRB to create a durable glass phase that may contain Tc/Re. Limited data from a single CRB sample taken from an ES experiment indicate that, while a fraction of Tc/Re is present in the CRB in a readily leachable form, most of the Tc/Re deposited in the refractory is retained in the form of a durable glass phase. In addition, the molten salts from the LAW, mainly sulfates, chlorides, and nitrates, begin to evaporate from BV feeds at temperatures below 800 C and condense on solid surfaces at temperatures below 530 C. Three approaches aimed at reducing or preventing the deposition of soluble Tc/Re within the CRB were proposed: metal lining, sealing the CRB surface with a glaze, and lining the CRB with ceramic tiles. Metal liners were deemed unsuitable because evaluations showed that they can cause unacceptable distortions of the electric field in the BV system. Sodium silicate and a low-alkali borosilicate glaze were selected for testing. The glazes slowed down molten salt condensate penetration, but did little to reduce the

  14. 7 CFR 958.53 - Handling for specified purposes.

    Science.gov (United States)

    2010-01-01

    ... DESIGNATED COUNTIES IN IDAHO, AND MALHEUR COUNTY, OREGON Order Regulating Handling Regulation § 958.53..., in order to facilitate the handling of onions for the following purposes whenever he finds that to...

  15. Concurrent projects: how many can you handle?

    Directory of Open Access Journals (Sweden)

    Steyn, Herman

    2015-11-01

    Full Text Available The number of projects a person can handle simultaneously is a relevant factor in strategic planning and in project portfolio management. Internationally the de facto standard seems to be that a person should not work on more than two or three projects simultaneously; but several factors could influence this figure. Empirical evidence indicates that, in some South African sectors, people tend to work on many more than two or three projects simultaneously. In this paper, factors that influence the number of projects a person can work on are identified so that they can be investigated in further studies. Some ideas about using key resources optimally are also presented.

  16. Factors influencing aircraft ground handling performance

    Science.gov (United States)

    Yager, T. J.

    1983-01-01

    Problems associated with aircraft ground handling operations on wet runways are discussed and major factors which influence tire/runway braking and cornering traction capability are identified including runway characteristics, tire hydroplaning, brake system anomalies, and pilot inputs. Research results from tests with instrumented ground vehicles and aircraft, and aircraft wet runway accident investigation are summarized to indicate the effects of different aircraft, tire, and runway parameters. Several promising means are described for improving tire/runway water drainage capability, brake system efficiency, and pilot training to help optimize aircraft traction performance on wet runways.

  17. Vilkår for kollektiv handling

    DEFF Research Database (Denmark)

    Scheuer, Steen

    2014-01-01

    Fagbevægelsens situation og opgaver påvirkes af forandringer i de institutionelle makrostrukturer, som indebærer et øget fokus på lønrelativiteter og på at overvåge ens egen faggruppes eller erhvervsgruppes relative position i lønhierarkiet. Dette fokus er ikke nyt, men det er øget, og det er int...... serviceydelser, fagforeningerne oprindeligt blev sat i verden for at levere. Det er i disse ændrede vilkår for kollektive handling, i dette krydspres, at fagbevægelsen skal finde ny strategier og definere ny former for solidaritet...

  18. CANISTER HANDLING FACILITY WORKER DOSE ASSESSMENT

    Energy Technology Data Exchange (ETDEWEB)

    D.T. Dexheimer

    2004-02-27

    The purpose of this calculation is to estimate radiation doses received by personnel working in the Canister Handling Facility (CHF) performing operations to receive transportation casks, transfer wastes, prepare waste packages, perform associated equipment maintenance. The specific scope of work contained in this calculation covers individual worker group doses on an annual basis, and includes the contributions due to external and internal radiation. The results of this calculation will be used to support the design of the CHF and provide occupational dose estimates for the License Application.

  19. 76 FR 37118 - Manual Materials Handling (MMH) Workshop

    Science.gov (United States)

    2011-06-24

    ... HUMAN SERVICES Centers for Disease Control and Prevention Manual Materials Handling (MMH) Workshop... Health, will be holding a two-day Manual Materials Handling (MMH) Workshop. The Workshop is a National... engineering solutions for manual materials handling jobs in Retail, Wholesale and Warehouse industries....

  20. 30 CFR 77.606 - Energized trailing cables; handling.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Energized trailing cables; handling. 77.606... COAL MINES Trailing Cables § 77.606 Energized trailing cables; handling. Energized medium- and high-voltage trailing cables shall be handled only by persons wearing protective rubber gloves (see § 77.606-1...

  1. Execution Constraint Verification of Exception Handling on UML Sequence Diagrams

    NARCIS (Netherlands)

    Ciraci, S.; Sözer, Hasan; Aksit, Mehmet; Havinga, W.K.

    2011-01-01

    Exception handling alters the control flow of the program. As such, errors introduced in exception handling code may influence the overall program in undesired ways. To detect such errors early and thereby decrease the programming costs, it is worthwhile to consider exception handling at design

  2. 49 CFR 219.205 - Specimen collection and handling.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Specimen collection and handling. 219.205 Section... § 219.205 Specimen collection and handling. (a) General. Urine and blood specimens must be obtained, marked, preserved, handled, and made available to FRA consistent with the requirements of this subpart...

  3. 9 CFR 114.11 - Storage and handling.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Storage and handling. 114.11 Section... BIOLOGICAL PRODUCTS § 114.11 Storage and handling. Biological products at licensed establishments shall be protected at all times against improper storage and handling. Completed product shall be kept under...

  4. 46 CFR 151.45-4 - Cargo-handling.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Cargo-handling. 151.45-4 Section 151.45-4 Shipping COAST... LIQUID HAZARDOUS MATERIAL CARGOES Operations § 151.45-4 Cargo-handling. (a) On a United States tank barge... the persons in charge of cargo handling. (h) Auxiliary steam, air, fuel, or electric current. When...

  5. 49 CFR 176.57 - Supervision of handling and stowage.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Supervision of handling and stowage. 176.57 Section 176.57 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS... VESSEL General Handling and Stowage § 176.57 Supervision of handling and stowage. (a) Hazardous...

  6. 30 CFR 75.817 - Cable handling and support systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cable handling and support systems. 75.817... High-Voltage Longwalls § 75.817 Cable handling and support systems. Longwall mining equipment must be provided with cable-handling and support systems that are constructed, installed and maintained to...

  7. 7 CFR 923.322 - Washington cherry handling regulation.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Washington cherry handling regulation. 923.322 Section... CHERRIES GROWN IN DESIGNATED COUNTIES IN WASHINGTON Order Regulating Handling Grade, Size, Container and Pack Regulation § 923.322 Washington cherry handling regulation. (a) Grade. No handler shall...

  8. 77 FR 76815 - Handling of Animals; Contingency Plans

    Science.gov (United States)

    2012-12-31

    ... Animal and Plant Health Inspection Service 9 CFR Parts 2 and 3 RIN 0579-AC69 Handling of Animals... handling, care, treatment, and transportation of certain animals by dealers, research facilities... humane handling, care, treatment, and transportation of animals covered by the AWA. Currently, part 3...

  9. 46 CFR 154.1850 - Entering cargo handling spaces.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Entering cargo handling spaces. 154.1850 Section 154... cargo handling spaces. (a) The master shall ensure that the ventilation system under § 154.1200 is in... handling equipment. (b) The master shall ensure that a warning sign listing the requirement for use of the...

  10. Holographic representation of local bulk operators

    CERN Document Server

    Hamilton, A; Lifschytz, G; Lowe, D A; Hamilton, Alex; Kabat, Daniel; Lifschytz, Gilad; Lowe, David A.

    2006-01-01

    The Lorentzian AdS/CFT correspondence implies a map between local operators in supergravity and non-local operators in the CFT. By explicit computation we construct CFT operators which are dual to local bulk fields in the semiclassical limit. The computation is done for general dimension in global, Poincare and Rindler coordinates. We find that the CFT operators can be taken to have compact support in a region of the complexified boundary whose size is set by the bulk radial position. We show that at finite N the number of independent commuting operators localized within a bulk volume saturates the holographic bound.

  11. Bulk density and compaction behavior of knife mill chopped switchgrass, wheat straw, and corn stover.

    Science.gov (United States)

    Chevanan, Nehru; Womac, Alvin R; Bitra, Venkata S P; Igathinathane, C; Yang, Yuechuan T; Miu, Petre I; Sokhansanj, Shahab

    2010-01-01

    Bulk density of comminuted biomass significantly increased by vibration during handling and transportation, and by normal pressure during storage. Compaction characteristics affecting the bulk density of switchgrass, wheat straw, and corn stover chopped in a knife mill at different operating conditions and using four different classifying screens were studied. Mean loose-filled bulk densities were 67.5+/-18.4 kg/m(3) for switchgrass, 36.1+/-8.6 kg/m(3) for wheat straw, and 52.1+/-10.8 kg/m(3) for corn stover. Mean tapped bulk densities were 81.8+/-26.2 kg/m(3) for switchgrass, 42.8+/-11.7 kg/m(3) for wheat straw, and 58.9+/-13.4 kg/m(3) for corn stover. Percentage changes in compressibility due to variation in particle size obtained from a knife mill ranged from 64.3 to 173.6 for chopped switchgrass, 22.2-51.5 for chopped wheat straw and 42.1-117.7 for chopped corn stover within the tested consolidation pressure range of 5-120 kPa. Pressure and volume relationship of chopped biomass during compression with application of normal pressure can be characterized by the Walker model and Kawakita and Ludde model. Parameter of Walker model was correlated to the compressibility with Pearson correlation coefficient greater than 0.9. Relationship between volume reduction in chopped biomass with respect to number of tappings studied using Sone's model indicated that infinite compressibility was highest for chopped switchgrass followed by chopped wheat straw and corn stover. Degree of difficulty in packing measured using the parameters of Sone's model indicated that the chopped wheat straw particles compacted very rapidly by tapping compared to chopped switchgrass and corn stover. These results are very useful for solving obstacles in handling bulk biomass supply logistics issues for a biorefinery.

  12. Integrated solid waste management in megacities

    Directory of Open Access Journals (Sweden)

    M.A. Abdoli

    2016-05-01

    Full Text Available Rapid urbanization and industrialization, population growth and economic growth in developing countries make management of municipal solid waste more complex comparing with developed countries. Furthermore, the conventional municipal solid waste management approach often is reductionists, not tailored to handle complexity. Therefore, the need to a comprehensive and multi-disciplinary approach regarding the municipal solid waste management problems is increasing. The concept of integrated solid waste management is accepted for this aim all over the world. This paper analyzes the current situation as well as opportunities and challenges regarding municipal solid waste management in Isfahan according to the integrated solid waste management framework in six aspects: environmental, political/legal, institutional, socio-cultural, financial/economic, technical and performance aspects. Based on the results obtained in this analysis, the main suggestions for future integrated solid waste management of Isfahan are as i promoting financial sustainability by taking the solid waste fee and reducing the expenses through the promoting source collection of recyclable materials, ii improving compost quality and also marketing the compost products simultaneously, iii promoting the private sector involvements throughout the municipal solid waste management system.

  13. Nozzle extraction process and handlemeter for measuring handle

    Science.gov (United States)

    Alley, V. L., Jr.; Mchatton, A. D. (Inventor)

    1978-01-01

    Method and apparatus for quantitatively measuring the handle of fabrics and other flexible materials is presented. Handle is that term used to refer to the qualities of drapability, flexibility, compressibility, foldability, stretchability, pliability, etc., possessed by fabrics and other flexible materials. In the present invention the handle of a material sample is quantified by measuring the force required to draw the sample through an orifice and expressing the resultant extractive force as a function of test apparatus geometry and the amount of sample drawn through the orifice to arrive at quantitative measure of handle, to be defined as handle modulus, for the sample in question.

  14. Superconducting bulk magnets for magnetic levitation systems

    Science.gov (United States)

    Fujimoto, H.; Kamijo, H.

    2000-06-01

    The major applications of high-temperature superconductors have mostly been confined to products in the form of wires and thin films. However, recent developments show that rare-earth REBa 2Cu 3O 7- x and light rare-earth LREBa 2Cu 3O 7- x superconductors prepared by melt processes have a high critical-current density at 77 K and high magnetic fields. These superconductors will promote the application of bulk high-temperature superconductors in high magnetic fields; the superconducting bulk magnet for the Maglev train is one possible application. We investigated the possibility of using bulk magnets in the Maglev system, and examined flux-trapping characteristics of multi-superconducting bulks arranged in array.

  15. Measuring Bulk Flows in Large Scale Surveys

    CERN Document Server

    Feldman, H A; Feldman, Hume A.; Watkins, Richard

    1993-01-01

    We follow a formalism presented by Kaiser to calculate the variance of bulk flows in large scale surveys. We apply the formalism to a mock survey of Abell clusters \\'a la Lauer \\& Postman and find the variance in the expected bulk velocities in a universe with CDM, MDM and IRAS--QDOT power spectra. We calculate the velocity variance as a function of the 1--D velocity dispersion of the clusters and the size of the survey.

  16. The Bulk Multicore Architecture for Improved Programmability

    Science.gov (United States)

    2009-12-01

    algorithm, forcing the same order of chunk commits as in the recording step. This design, which we call PicoLog , typically incurs a performance cost... PicoLog . Data-race detection at production- run speed. The Bulk Multicore can support an efficient data-race detec- tor based on the “happens-before...Bulk Multicore (a), with a possible OrderOnly execution log (b) and PicoLog execution log (c). contributed articles DECEMBER 2009 | VOL. 52

  17. Brief neonatal handling alters sexually dimorphic behaviors in adult rats.

    Science.gov (United States)

    Fujimoto, Tetsuya; Kubo, Kazuhiko; Nishikawa, Yasuo; Aou, Shuji

    2014-03-01

    Several effects of neonatal handling on brain and behavior have been reported. We investigated the effects of neonatal handling on behaviors that have been shown to be sexually dimorphic in rats using an open-field test. "Gender differences" were observed in locomotor activity, exploratory behavior and grooming in the handled group. However, clear gender differences in these behaviors were not observed in the non-handled group. Our findings show that brief daily handling sessions (~ 1 min) in the first 2 weeks of postnatal life increased locomotor activity and exploratory behavior, and that these effects were more pronounced in females. Moreover, many rats in the non-handling group exhibited an increase in defecation relative to the handling group during the 10-min observation period. This suggests that the non-handling group experienced more stress in response to the novel open-field arena, and that this resulted in the absence of gender differences. Notably, this anxiety-related response was attenuated by neonatal handling. Our study underscores the impact of brief neonatal handling on sexually dimorphic behaviors, and indicates that caution should be exercised in controlling for the effects of handling between experimental groups, particularly in neurotoxicological studies that evaluate gender differences.

  18. Prospects for Detecting a Cosmic Bulk Flow

    Science.gov (United States)

    Rose, Benjamin; Garnavich, Peter M.; Mathews, Grant James

    2015-01-01

    The ΛCDM model is based upon a homogeneous, isotropic space-time leading to uniform expansion with random peculiar velocities caused by local gravitation perturbations. The Cosmic Microwave Background (CMB) radiation evidences a significant dipole moment in the frame of the Local Group. This motion is usually explained with the Local Group's motion relative to the background Hubble expansion. An alternative explanation, however, is that the dipole moment is the result of horizon-scale curvature remaining from the birth of space-time, possibly a result of quantum entanglement with another universe. This would appear as a single velocity (a bulk flow) added to all points in space. These two explanations differ observationally on cosmic distance scales (z > 0.1). There have been many differing attempts to detect a bulk flow, many with no detectable bulk flow but some with a bulk flow velocity as large as 1000 km/s. Here we report on a technique based upon minimizing the scatter around the expected cosine distribution of the Hubble redshift residuals with respect to angular distance on the sky. That is, the algorithm searches for a directional dependence of Hubble residuals. We find results consistent with most other bulk flow detections at z Type Ia Supernovae to be ~0.01, whereas the current error (~0.2.) is more than an order of magnitude too large for the detection of bulk flow beyond z~0.05.

  19. Solid-phase oligosaccharide synthesis with tris(alkoxy)benzyl amine (BAL) safety-catch anchoring

    DEFF Research Database (Denmark)

    Tolborg, Jakob Fjord; Jensen, Knud Jørgen

    2000-01-01

    A tris(alkoxy)benzylamine (BAL) handle strategy was developed for safety-catch anchoring of D-glucosamine derivatives in solid-phase synthesis of oligosaccharides; the linkage between the BAL handle and the amine proved stable to conc. TFA and Lewis acids, but after N-acylation the amide could...

  20. On the early and developed stages of surface condensation: competition mechanism between interfacial and condensate bulk thermal resistances

    Science.gov (United States)

    Sun, Jie; Wang, Hua Sheng

    2016-10-01

    We use molecular dynamics simulation to investigate the early and developed stages of surface condensation. We find that the liquid-vapor and solid-liquid interfacial thermal resistances depend on the properties of solid and fluid, which are time-independent, while the condensate bulk thermal resistance depends on the condensate thickness, which is time-dependent. There exists intrinsic competition between the interfacial and condensate bulk thermal resistances in timeline and the resultant total thermal resistance determines the condensation intensity for a given vapor-solid temperature difference. We reveal the competition mechanism that the interfacial thermal resistance dominates at the onset of condensation and holds afterwards while the condensate bulk thermal resistance gradually takes over with condensate thickness growing. The weaker the solid-liquid bonding, the later the takeover occurs. This competition mechanism suggests that only when the condensate bulk thermal resistance is reduced after it takes over the domination can the condensation be effectively intensified. We propose a unified theoretical model for the thermal resistance analysis by making dropwise condensation equivalent to filmwise condensation. We further find that near a critical point (contact angle being ca. 153°) the bulk thermal resistance has the least opportunity to take over the domination while away from it the probability increases.

  1. Feed Variability and Bulk Vitrification Glass Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, Lenna A.; Vienna, John D.

    2005-01-10

    The supplemental treatment (ST) bulk vitrification process will obtain its feed, consisting of low-activity waste (LAW), from more than one source. One purpose of this letter report is to describe the compositional variability of the feed to ST. The other is to support the M-62-08 decision by providing a preliminary assessment of the effectiveness of bulk vitrification (BV), the process that has been selected to perform supplemental treatment, in handling the ST feed envelope. Roughly nine-tenths of the ST LAW feed will come from the Waste Treatment Plant (WTP) pretreatment. This processed waste is expected to combine (1) a portion of the same LAW feed sent to the WTP melters and (2) a dilute stream that is the product of the condensate from the submerged-bed scrubber (SBS) and the drainage from the electrostatic precipitator (WESP), both of which are part of the LAW off-gas system. The manner in which the off-gas-product stream is concentrated to reduce its volume, and the way in which the excess LAW and off-gas product streams are combined, are part of the interface between WTP and ST and have not been determined. This letter report considers only one possible arrangement, in which half of the total LAW is added to the off-gas product stream, giving an estimated ST feed stream from WTP. (Total LAW equals that portion of LAW sent to the WTP LAW vitrification plant (WTP LAW) plus the LAW not currently treatable in the LAW vitrification plant due to capacity limitations (excess)).

  2. Opportunities for shear energy scaling in bulk acoustic wave resonators.

    Science.gov (United States)

    Jose, Sumy; Hueting, Raymond J E

    2014-10-01

    An important energy loss contribution in bulk acoustic wave resonators is formed by so-called shear waves, which are transversal waves that propagate vertically through the devices with a horizontal motion. In this work, we report for the first time scaling of the shear-confined spots, i.e., spots containing a high concentration of shear wave displacement, controlled by the frame region width at the edge of the resonator. We also demonstrate a novel methodology to arrive at an optimum frame region width for spurious mode suppression and shear wave confinement. This methodology makes use of dispersion curves obtained from finite-element method (FEM) eigenfrequency simulations for arriving at an optimum frame region width. The frame region optimization is demonstrated for solidly mounted resonators employing several shear wave optimized reflector stacks. Finally, the FEM simulation results are compared with measurements for resonators with Ta2O5/ SiO2 stacks showing suppression of the spurious modes.

  3. Phase diagram of a bulk 1d lattice Coulomb gas

    Science.gov (United States)

    Démery, V.; Monsarrat, R.; Dean, D. S.; Podgornik, R.

    2016-01-01

    The exact solution, via transfer matrix, of the simple one-dimensional lattice Coulomb gas (1d LCG) model can reproduce peculiar features of ionic liquid capacitors, such as overscreening, layering, and camel- and bell-shaped capacitance curves. Using the same transfer matrix method, we now compute the bulk properties of the 1d LCG in the constant voltage ensemble. We unveil a phase diagram with rich structure exhibiting low-density disordered and high-density ordered phases, separated by a first-order phase transition at low temperature; the solid state at full packing can be ordered or not, depending on the temperature. This phase diagram, which is strikingly similar to its three-dimensional counterpart, also sheds light on the behaviour of the confined system.

  4. Microstructural characterization of bulk MgB{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Wiederhold, Alex; Koblischka, Michael; Hartmann, Uwe [Institute of Experimental Physics, Saarland University, P. O. Box 151150, D-66123 Saarbruecken (Germany); Inoue, Kazuo; Muralidhar, Miryala; Murakami, Masato [Department of Material Science and Engeneering, Shibaura Institute of Technology, 3-7-5 Toyosu, Koto-ku, Tokyo 135-8548 (Japan); Berger, Kevin; Douine, Bruno [GREEN, Universite de Lorraine, Vandoeuvre-les-Nancy (France); Hauet, Thomas [Institute Jean Lamour, Universite de Lorraine, Vandoeuvre-les-Nancy (France); Noudem, Jacques [CRISMAT-CNRS, Cherbourg (France)

    2015-07-01

    A series of disk-shaped bulk MgB{sub 2} superconductors (sample diameter up to 4 cm) was prepared in order to improve the performance for superconducting super-magnets. Several samples were fabricated using a solid state reaction in pure Ar atmosphere from 750 to 950 C to obtain the highest critical current density (j{sub c}) as well as large trapped field values. Magnetization and transport measurements revealed that at the low reaction temperatures flux pinning at grain boundaries is dominant, which is decreasing on increasing temperature. At the highest reaction temperature, j{sub c} was found to increase again indicating a change of the pinning mechanism. In order to clarify this behavior the samples were characterized in detail by means of transmission electron microscopy (TEM) and transmission electron backscatter diffraction (t-EBSD).

  5. Aspects of uranium chemistry pertaining to UF{sub 6} cylinder handling

    Energy Technology Data Exchange (ETDEWEB)

    Ritter, R.L.; Barber, E.J. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States)

    1991-12-31

    Under normal conditions, the bulk of UF{sub 6} in storage cylinders will be in the solid state with an overpressure of gaseous UF{sub 6} well below one atmosphere. Corrosion of the interior of the cylinder will be very slow, with formation of a small amount of reduced fluoride, probably U{sub 2}F{sub 9}. The UO{sub 3}-HF-H{sub 2}O phase diagram indicates that reaction of any inleaking water vapor with the solid UF{sub 6} will generate the solid material [H{sub 3}O]{sub 2}(U(OH){sub 4}F{sub 4}) in equilibrium with an aqueous HF solution containing only small amounts of uranium. The corrosion of the steel cylinder by these materials may be enhanced over that observed with gaseous anhydrous UF{sub 6}.

  6. Progression towards optimization of viscosity of highly concentrated carbonaceous solid-water slurries by incorporating and modifying surface chemistry parameters with and without additives

    Science.gov (United States)

    Mukherjee, Amrita

    Carbonaceous solid-water slurries (CSWS) are concentrated suspensions of coal, petcoke bitumen, pitch etc. in water which are used as feedstock for gasifiers. The high solid loading (60-75 wt.%) in the slurry increases CSWS viscosity. For easier handling and pumping of these highly loaded mixtures, low viscosities are desirable. Depending on the nature of the carbonaceous solid, solids loading in the slurry and the particle size distribution, viscosity of a slurry can vary significantly. Ability to accurately predict the viscosity of a slurry will provide a better control over the design of slurry transport system and for viscosity optimization. The existing viscosity prediction models were originally developed for hard-sphere suspensions and therefore do not take into account surface chemistry. As a result, the viscosity predictions using these models for CSWS are not very accurate. Additives are commonly added to decrease viscosity of the CSWS by altering the surface chemistry. Since additives are specific to CSWS, selection of appropriate additives is crucial. The goal of this research was to aid in optimization of CSWS viscosity through improved prediction and selection of appropriate additive. To incorporate effect of surface chemistry in the models predicting suspension viscosity, the effect of the different interfacial interactions caused by different surface chemistries has to be accounted for. Slurries of five carbonaceous solids with varying O/C ratio (to represent different surface chemistry parameters) were used for the study. To determine the interparticle interactions of the carbonaceous solids in water, interfacial energies were calculated on the basis of surface chemistries, characterized by contact angles and zeta potential measurements. The carbonaceous solid particles in the slurries were assumed to be spherical. Polar interaction energy (hydrophobic/hydrophilic interaction energy), which was observed to be 5-6 orders of magnitude higher than the

  7. CERN Sells its Electronic Document Handling System

    CERN Multimedia

    2001-01-01

    The EDH team. Left to right: Derek Mathieson, Rotislav Titov, Per Gunnar Jonsson, Ivica Dobrovicova, James Purvis. Missing from the photo is Jurgen De Jonghe. In a 1 MCHF deal announced this week, the British company Transacsys bought the rights to CERN's Electronic Document Handling (EDH) system, which has revolutionised the Laboratory's administrative procedures over the last decade. Under the deal, CERN and Transacsys will collaborate on developing EDH over the coming 12 months. CERN will provide manpower and expertise and will retain the rights to use EDH, which will also be available freely to other particle physics laboratories. This development is an excellent example of the active technology transfer policy CERN is currently pursuing. The negotiations were carried out through a fruitful collaboration between AS and ETT Divisions, following the recommendations of the Technology Advisory Board, and with the help of SPL Division. EDH was born in 1991 when John Ferguson and Achille Petrilli of AS Divisi...

  8. Primer on tritium safe handling practices

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This Primer is designed for use by operations and maintenance personnel to improve their knowledge of tritium safe handling practices. It is applicable to many job classifications and can be used as a reference for classroom work or for self-study. It is presented in general terms for use throughout the DOE Complex. After reading it, one should be able to: describe methods of measuring airborne tritium concentration; list types of protective clothing effective against tritium uptake from surface and airborne contamination; name two methods of reducing the body dose after a tritium uptake; describe the most common method for determining amount of tritium uptake in the body; describe steps to take following an accidental release of airborne tritium; describe the damage to metals that results from absorption of tritium; explain how washing hands or showering in cold water helps reduce tritium uptake; and describe how tritium exchanges with normal hydrogen in water and hydrocarbons.

  9. Error handling strategies in multiphase inverse modeling

    Energy Technology Data Exchange (ETDEWEB)

    Finsterle, S.; Zhang, Y.

    2010-12-01

    Parameter estimation by inverse modeling involves the repeated evaluation of a function of residuals. These residuals represent both errors in the model and errors in the data. In practical applications of inverse modeling of multiphase flow and transport, the error structure of the final residuals often significantly deviates from the statistical assumptions that underlie standard maximum likelihood estimation using the least-squares method. Large random or systematic errors are likely to lead to convergence problems, biased parameter estimates, misleading uncertainty measures, or poor predictive capabilities of the calibrated model. The multiphase inverse modeling code iTOUGH2 supports strategies that identify and mitigate the impact of systematic or non-normal error structures. We discuss these approaches and provide an overview of the error handling features implemented in iTOUGH2.

  10. Handling of wet residues in industry

    DEFF Research Database (Denmark)

    Villanueva, Alejandro

    In countries with high prices of fresh water use and wastewater discharge, water recycling has become an alternative to traditional water consumption and discharge for industries with water-based processes. Industrial water recycling means in many cases that water has to be treated and cleaned......, to remove from it the substances which presence impedes reusing the water. These substances accumulate in a by-product called wet residue. An integral part of water recycling projects in the industry is the handling and disposal of the wet residues generated. The treatment, utilisation and disposal of wet...... residues depend totally on the industrial sector of origin and the composition of the water to be recycled. Treatment is more problematic in some cases than in others, but in all water recycling applications it is an issue of concern. The present study addresses this concern by providing a package...

  11. Handling Occlusions for Robust Augmented Reality Systems

    Directory of Open Access Journals (Sweden)

    Madjid Maidi

    2010-01-01

    Full Text Available In Augmented Reality applications, the human perception is enhanced with computer-generated graphics. These graphics must be exactly registered to real objects in the scene and this requires an effective Augmented Reality system to track the user's viewpoint. In this paper, a robust tracking algorithm based on coded fiducials is presented. Square targets are identified and pose parameters are computed using a hybrid approach based on a direct method combined with the Kalman filter. An important factor for providing a robust Augmented Reality system is the correct handling of targets occlusions by real scene elements. To overcome tracking failure due to occlusions, we extend our method using an optical flow approach to track visible points and maintain virtual graphics overlaying when targets are not identified. Our proposed real-time algorithm is tested with different camera viewpoints under various image conditions and shows to be accurate and robust.

  12. Handling Occlusions for Robust Augmented Reality Systems

    Directory of Open Access Journals (Sweden)

    Maidi Madjid

    2010-01-01

    Full Text Available Abstract In Augmented Reality applications, the human perception is enhanced with computer-generated graphics. These graphics must be exactly registered to real objects in the scene and this requires an effective Augmented Reality system to track the user's viewpoint. In this paper, a robust tracking algorithm based on coded fiducials is presented. Square targets are identified and pose parameters are computed using a hybrid approach based on a direct method combined with the Kalman filter. An important factor for providing a robust Augmented Reality system is the correct handling of targets occlusions by real scene elements. To overcome tracking failure due to occlusions, we extend our method using an optical flow approach to track visible points and maintain virtual graphics overlaying when targets are not identified. Our proposed real-time algorithm is tested with different camera viewpoints under various image conditions and shows to be accurate and robust.

  13. Handling large variations in mechanics: Some applications

    Indian Academy of Sciences (India)

    K Balaji Rao; M B Anoop; S Muralidhara; B K Raghu Prasad

    2015-08-01

    There is a need to use probability distributions with power-law decaying tails to describe the large variations exhibited by some of the physical phenomena. The Weierstrass Random Walk (WRW) shows promise for modeling such phenomena. The theory of anomalous diffusion is now well established. It has found number of applications in Physics, Chemistry and Biology. However, its applications are limited in structural mechanics in general, and structural engineering in particular. The aim of this paper is to present some mathematical preliminaries related to WRW that would help in possible applications. In the limiting case, it represents a diffusion process whose evolution is governed by a fractional partial differential equation. Three applications of superdiffusion processes in mechanics, illustrating their effectiveness in handling large variations, are presented.

  14. 46 CFR 148.04-19 - Tankage, garbage or rough ammoniate, solid.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Tankage, garbage or rough ammoniate, solid. 148.04-19... CARRIAGE OF SOLID HAZARDOUS MATERIALS IN BULK Special Additional Requirements for Certain Material § 148.04-19 Tankage, garbage or rough ammoniate, solid. (a) The material must contain at least 7...

  15. Overview on Hydrate Coring, Handling and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Jon Burger; Deepak Gupta; Patrick Jacobs; John Shillinglaw

    2003-06-30

    Gas hydrates are crystalline, ice-like compounds of gas and water molecules that are formed under certain thermodynamic conditions. Hydrate deposits occur naturally within ocean sediments just below the sea floor at temperatures and pressures existing below about 500 meters water depth. Gas hydrate is also stable in conjunction with the permafrost in the Arctic. Most marine gas hydrate is formed of microbially generated gas. It binds huge amounts of methane into the sediments. Worldwide, gas hydrate is estimated to hold about 1016 kg of organic carbon in the form of methane (Kvenvolden et al., 1993). Gas hydrate is one of the fossil fuel resources that is yet untapped, but may play a major role in meeting the energy challenge of this century. In June 2002, Westport Technology Center was requested by the Department of Energy (DOE) to prepare a ''Best Practices Manual on Gas Hydrate Coring, Handling and Analysis'' under Award No. DE-FC26-02NT41327. The scope of the task was specifically targeted for coring sediments with hydrates in Alaska, the Gulf of Mexico (GOM) and from the present Ocean Drilling Program (ODP) drillship. The specific subjects under this scope were defined in 3 stages as follows: Stage 1: Collect information on coring sediments with hydrates, core handling, core preservation, sample transportation, analysis of the core, and long term preservation. Stage 2: Provide copies of the first draft to a list of experts and stakeholders designated by DOE. Stage 3: Produce a second draft of the manual with benefit of input from external review for delivery. The manual provides an overview of existing information available in the published literature and reports on coring, analysis, preservation and transport of gas hydrates for laboratory analysis as of June 2003. The manual was delivered as draft version 3 to the DOE Project Manager for distribution in July 2003. This Final Report is provided for records purposes.

  16. Development of spent fuel remote handling technology

    Energy Technology Data Exchange (ETDEWEB)

    Park, B. S.; Yoon, J. S.; Hong, H. D. (and others)

    2007-02-15

    In this research, the remote handling technology was developed for the ACP application. The ACP gives a possible solution to reduce the rapidly cumulative amount of spent fuels generated from the nuclear power plants in Korea. The remote technologies developed in this work are a slitting device, a voloxidizer, a modified telescopic servo manipulator and a digital mock-up. A slitting device was developed to declad the spent fuel rod-cuts and collect the spent fuel UO{sub 2} pellets. A voloxidizer was developed to convert the spent fuel UO{sub 2} pellets obtained from the slitting process in to U{sub 3}O{sub 8} powder. Experiments were performed to test the capabilities and remote operation of the developed slitting device and voloxidizer by using simulated rod-cuts and fuel in the ACP hot cell. A telescopic servo manipulator was redesigned and manufactured improving the structure of the prototype. This servo manipulator was installed in the ACP hot cell, and the target module for maintenance of the process equipment was selected. The optimal procedures for remote operation were made through the maintenance tests by using the servo manipulator. The ACP digital mockup in a virtual environment was established to secure a reliability and safety of remote operation and maintenance. The simulation for the remote operation and maintenance was implemented and the operability was analyzed. A digital mockup about the preliminary conceptual design of an enginnering-scale ACP was established, and an analysis about a scale of facility and remote handling was accomplished. The real-time diagnostic technique was developed to detect the possible fault accidents of the slitting device. An assessment of radiation effect for various sensors was also conducted in the radiation environment.

  17. Evaluating ITER remote handling middleware concepts

    Energy Technology Data Exchange (ETDEWEB)

    Koning, J.F., E-mail: j.f.koning@differ.nl [FOM Institute DIFFER, Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster and ITER-NL, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Heemskerk, C.J.M.; Schoen, P.; Smedinga, D. [Heemskerk Innovative Technology, Noordwijk (Netherlands); Boode, A.H. [University of Applied Sciences InHolland, Alkmaar (Netherlands); Hamilton, D.T. [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2013-10-15

    Highlights: ► Remote Handling Study Centre: middleware system setup and modules built. ► Aligning to ITER RH Control System Layout: prototype of database, VR and simulator. ► OpenSplice DDS, ZeroC ICE messaging and object oriented middlewares reviewed. ► Windows network latency found problematic for semi-realtime control over the network. -- Abstract: Remote maintenance activities in ITER will be performed by a unique set of hardware systems, supported by an extensive software kit. A layer of middleware will manage and control a complex set of interconnections between teams of operators, hardware devices in various operating theatres, and databases managing tool and task logistics. The middleware is driven by constraints on amounts and timing of data like real-time control loops, camera images, and database access. The Remote Handling Study Centre (RHSC), located at FOM institute DIFFER, has a 4-operator work cell in an ITER relevant RH Control Room setup which connects to a virtual hot cell back-end. The centre is developing and testing flexible integration of the Control Room components, resulting in proof-of-concept tests of this middleware layer. SW components studied include generic human-machine interface software, a prototype of a RH operations management system, and a distributed virtual reality system supporting multi-screen, multi-actor, and multiple independent views. Real-time rigid body dynamics and contact interaction simulation software supports simulation of structural deformation, “augmented reality” operations and operator training. The paper presents generic requirements and conceptual design of middleware components and Operations Management System in the context of a RH Control Room work cell. The simulation software is analyzed for real-time performance and it is argued that it is critical for middleware to have complete control over the physical network to be able to guarantee bandwidth and latency to the components.

  18. Safety Enhancements for TRU Waste Handling - 12258

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, Curt N. [Perma-Fix Northwest Richland, Inc., Richland, WA 99354 (United States)

    2012-07-01

    For years, proper Health Physics practices and 'As Low As Reasonably Achievable' (ALARA) principles have fostered the use of glove boxes or other methods of handling (without direct contact) high activities of radioactive material. The physical limitations of using glove boxes on certain containers have resulted in high-activity wastes being held in storage awaiting a path forward. Highly contaminated glove boxes and other remote handling equipment no longer in use have also been added to the growing list of items held for storage with no efficient method of preparation for proper disposal without creating exposure risks to personnel. This is especially true for wastes containing alpha-emitting radionuclides such as Plutonium and Americium that pose significant health risks to personnel if these Transuranic (TRU) wastes are not controlled effectively. Like any good safety program or root cause investigation PFNW has found that the identification of the cause of a negative change, if stopped, can result in a near miss and lessons learned. If this is done in the world of safety, it is considered a success story and is to be shared with others to protect the workers. PFNW believes that the tools, equipment and resources have improved over the past number of years but that the use of them has not progressed at the same rate. If we use our tools to timely identify the effect on the work environment and immediately following or possibly even simultaneously identify the cause or some of the causal factors, we may have the ability to continue to work rather than succumb to the start and stop-work mentality trap that is not beneficial in waste minimization, production efficiency or ALARA. (authors)

  19. Soy protein isolate molecular level contributions to bulk adhesive properties

    Science.gov (United States)

    Shera, Jeanne Norton

    Increasing environmental awareness and the recognized health hazards of formaldehyde-based resins has prompted a strong demand for environmentally-responsible adhesives for wood composites. Soy protein-based adhesives have been shown to be commercially viable with 90-day shelf stability and composite physical properties comparable to those of commercial formaldehyde-based particleboards. The main research focus is to isolate and characterize the molecular level features in soy protein isolate responsible for providing mechanical properties, storage stability, and water resistance during adhesive formulation, processing, and wood composite fabrication. Commercial composite board will be reviewed to enhance our understanding of the individual components and processes required for particleboard production. The levels of protein structure will be defined and an overview of current bio-based technology will be presented. In the process, the logic for utilizing soy protein as a sole binder in the adhesive will be reinforced. Variables such as adhesive components, pH, divalent ions, blend aging, protein molecular weight, formulation solids content, and soy protein functionalization will relate the bulk properties of soy protein adhesives to the molecular configuration of the soybean protein. This work has demonstrated that when intermolecular beta-sheet interactions and protein long-range order is disrupted, viscosity and mechanical properties decrease. Storage stability can be maintained through the stabilization of intermolecular beta-sheet interactions. When molecular weight is reduced through enzymatic digestion, long-range order is disrupted and viscosity and mechanical properties decrease accordingly. Processibility and physical properties must be balanced to increase solids while maintaining low viscosity, desirable mechanical properties, and adequate storage stability. The structure of the soybean protein must be related to the particleboard bulk mechanical

  20. 5 MJ flywheel based on bulk HTS magnetic suspension

    Science.gov (United States)

    Poltavets, V.; Kovalev, K.; Ilyasov, R.; Glazunov, A.; Maevsky, V.; Verzbitsky, L.; Akhmadyshev, V.; Shikov, A.

    2014-05-01

    Nowadays the flywheel energy storage systems (FES) are developed intensively as uninterruptible power supply (UPS) devices for on-land and transport (especially airborne) applications worldwide. This work is devoted to the FES with magnetic suspension on the base of bulk HTS YBCO elements and permanent magnets. The developed FES is intended to be used as UPS in Russian atomic industry in case of an emergency. For the successful design of the FES the following questions should be solved: design of the motor/generator, design of the rotor (flywheel), design of the bearing system, design of the control system and system of power load matching, design of the cooling system. The developed small-scale FES with the stored energy 0.5 MJ was used to solve these basic questions. The elaborated FES consists of the synchronous electric machine with permanent magnets, the solid flywheel with axial magnetic suspension on the base of YBCO bulks and permanent magnets, the system of control and power load matching, and the system of liquid nitrogen cooling. The results of theoretical modeling of different schematics of magnetic suspension and experimental investigations of the constructed FES are presented. The design of the future full-scale FES with the stored energy ~5 MJ and output power up to 100 kW is described. The test results of the flywheel rotor and HTS magnetic suspension of 5 MJ FES are presented. This work is done under support of Rosatom within the frames of Russian Project "Superconducting Industry"

  1. Melt processing of bulk high Tc superconductors and their application

    Science.gov (United States)

    Murakami, M.; Oyama, T.; Fujimoto, H.; Gotoh, S.; Yamaguchi, K.

    1991-03-01

    The authors report a melt-powder-melt-growth (MPMG) process which results in high Jc for bulk Y-Ba-Cu-O superconductors. The Y-Ba-Cu-O pellets or powders are melt quenched. The quenched plates are crushed into powder and mixed well. The powder is then compacted into desired shapes, remelted, and slowly cooled in a thermal gradient. When the starting composition is changed from the 1:2:3 stoichiometry toward the Y2BaCuO5(211) rich region, the 211 inclusions can be dispersed in the YBa2Cu3O(x) matrix, which contributes to increases in both flux pinning force and fracture toughness. A Jc value exceeding 3 x 108 A/sq m has been achieved at 77 K and 1 T. Another attractive feature of the MPMG process is that other components such as fine Ag powders can be added during solid-state mixing. Fine dispersion of Ag particles can effectively reduce the amount of cracking. MPMG-processed Y-Ba-Cu-O with Ag doping can levitate a mass of 3-kg at 1-mm height using a repulsive force against a 0.4-T magnet. A noncontacting rotation device such as a magnetic bearing can be made utilizing bulk high-Jc materials. A superconducting permanent magnet is also a promising candidate for future application. MPMG-processed Y-Ba-Cu-O can generate 0.25 T at 77 K.

  2. Data handling for the lepton detector

    Energy Technology Data Exchange (ETDEWEB)

    Cutts, D.; Droege, T.F.; Kasha, H.; Kirsch, L.E.; Littenberg, L.; Matthews, J.A.J.; Rabin, M.S.Z.; Scharenguivel, J.

    1978-01-01

    The data acquisition and processing needs of a typical lepton-oriented large-solid-angle detector were evaluated, and a configuration of the data readout systems (including microprocessors), control computer(s), and local intersection computer was recommended. Features considered explicitly include triggering and data rates, data readout and monitoring (standard device processor, event processor, and intersection event processor), and off-line computing. 6 figures, 2 tables. (RWR)

  3. Instruments for minimally invasive surgery: principles of ergonomic handles.

    Science.gov (United States)

    Matern, U; Waller, P

    1999-02-01

    Although the advantages of minimally invasive surgery (MIS) have been clearly established for the patient, the surgeon must cope with disadvantages caused by unergonomic instrument handles. Pressure areas and persisting nerve lesions have been described in the literature. The shape of the instrument handles has been identified as the reason for these disorders. To prevent these, it is necessary to use ergonomically designed handles for MIS instruments. Anatomic, physiologic, and ergonomic facts as well as the results of the authors' own experiences and tests are presented. On this basis, an ideal ergonomic working posture for the laparoscopic surgeon and an optimal grasp for manipulating the instruments' functional elements are recommended. To enable the surgeon to evaluate ergonomic handles for MIS instruments according to his own needs, 14 criteria for genuine "ergonomic handles" are established. On the basis of these criteria, deficiencies of handles currently available (ring and shank handles at an angle or with axial extension to the instrument shaft, and pistol handles) are discussed. Furthermore, new handles, developed by the authors according to the criteria for genuine ergonomic handles, are presented.

  4. An algorithm for simulation of electrochemical systems with surface-bulk coupling strategies

    Science.gov (United States)

    Buoni, Matthew; Petzold, Linda

    2010-01-01

    In Buoni and Petzold (2007) [13] we described a new algorithm for simulation of electrochemical systems on two-dimensional irregular, time-dependent domains. Here we show how to extend the algorithm to three dimensions. We demonstrate our three-dimensional algorithm by simulating copper electrodeposition into a via structure. This problem poses challenges for the coupling of the dilute electrolyte (bulk) model to the surface dynamics model, which involves a complex network of reactions. To handle this coupling, we introduce a new and highly effective semi-implicit method.

  5. Development of superconductor bulk for superconductor bearing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chan Joong; Jun, Byung Hyuk; Park, Soon Dong (and others)

    2008-08-15

    Current carrying capacity is one of the most important issues in the consideration of superconductor bulk materials for engineering applications. There are numerous applications of Y-Ba-Cu-O (YBCO) bulk superconductors e.g. magnetic levitation train, flywheel energy storage system, levitation transportation, lunar telescope, centrifugal device, magnetic shielding materials, bulk magnets etc. Accordingly, to obtain YBCO materials in the form of large, single crystals without weak-link problem is necessary. A top seeded melt growth (TSMG) process was used to fabricate single crystal YBCO bulk superconductors. The seeded and infiltration growth (IG) technique was also very promising method for the synthesis of large, single-grain YBCO bulk superconductors with good superconducting properties. 5 wt.% Ag doped Y211 green compacts were sintered at 900 .deg. C {approx} 1200 .deg.C and then a single crystal YBCO was fabricated by an infiltration method. A refinement and uniform distribution of the Y211 particles in the Y123 matrix were achieved by sintering the Ag-doped samples. This enhancement of the critical current density was ascribable to a fine dispersion of the Y211 particles, a low porosity and the presence of Ag particles. In addition, we have designed and manufactured large YBCO single domain with levitation force of 10-13 kg/cm{sup 2} using TSMG processing technique.

  6. Into the Bulk: A Covariant Approach

    CERN Document Server

    Engelhardt, Netta

    2016-01-01

    I propose a general, covariant way of defining when one region is "deeper in the bulk" than another. This definition is formulated outside of an event horizon (or in the absence thereof) in generic geometries; it may be applied to both points and surfaces, and may be used to compare the depth of bulk points or surfaces relative to a particular boundary subregion or relative to the entire boundary. Using the recently proposed "lightcone cut" formalism, the comparative depth between two bulk points can be determined from the singularity structure of Lorentzian correlators in the dual field theory. I prove that, by this definition, causal wedges of progressively larger regions probe monotonically deeper in the bulk. The definition furthermore matches expectations in pure AdS and in static AdS black holes with isotropic spatial slices, where a well-defined holographic coordinate exists. In terms of holographic RG flow, this new definition of bulk depth makes contact with coarse-graining over both large distances ...

  7. Crystallization of High Bulk Density Nitroguanidine

    Science.gov (United States)

    2011-06-01

    microscope after obtaining solid crystals , which were filtered and washed using acetone. For measuring dissolved NQ concentration in the RC-1, a Mettler...known volume of clear supernatant solution was dried on a hot plate at 100°C and the weight of solid crystals was measured from which the solubility

  8. Design and sizing of ergonomic handles for hand tools.

    Science.gov (United States)

    Lewis, W G; Narayan, C V

    1993-10-01

    In this paper, handles for two commonly used hand tools, the chisel and the off-set pliers, are designed using ergonomic principles. These were sized for both males and females falling in the 5th percentile, 50th percentile and 95th percentile groupings. The stresses developed in the ergonomically designed chisel handle while in use were analysed to verify the validity of the design. This chisel handle was then manufactured, and preliminary evaluation using electromyography was conducted. In these tests, the stresses exerted on the flexor and extensor muscles of the arm were measured and compared with those obtained during the use of a conventional handle. Under similar working conditions, results clearly showed that the ergonomically designed handle allows higher working efficiency than existing handles.

  9. Effects of handling on fear reactions in young Icelandic horses

    DEFF Research Database (Denmark)

    Marsbøll, Anna Feldberg; Christensen, Janne Winther

    2015-01-01

    Reasons for performing the study Inclusion of objective temperament tests at practical horse breeding evaluations is of increased interest. It has been debated whether such tests may involve human handling, since there may be considerable differences in horses' handling experience. Objectives...... of fearfulness. Known handlers may ‘mask’ behavioural responses of horses in fear tests and thus handling by a known handler during testing may not be appropriate for objective evaluation of fearfulness in a practical situation....... To investigate the effect of a short-term standardised handling procedure on reactions of young horses in 2 types of fear tests (including and excluding human handling). Study design An experimental study with 3-year-old Icelandic horses (n = 24). Methods Handled horses (n = 12) were trained according...

  10. Manual handling the deceased child in a children's hospice.

    Science.gov (United States)

    Pike, Anne M

    2004-09-01

    The introduction of the Manual Handling Operation Regulations 1992 has forced organizations to review all manual handling carried out in the work-place. Safe manual handling is now a legislative requirement to enable the workforce to carry out their jobs in a safe and structured environment. This project looked in detail at the manual handling that was being carried out when caring for a child after they have died. It was undertaken at CHASE Children's Hospice in the period up until December 2002, with a telephone survey investigating practice at six other children's hospices. It aimed to identify incorrect procedures and, by applying the theory of ergonomics, identify changes that needed to occur in practice, making recommendations for environmental changes. The study led to the production of a policy for handling the children, devising child-specific handling guidelines, reducing the number of times the children are moved after they have died and providing appropriate equipment.

  11. A diphoton resonance from bulk RS

    Science.gov (United States)

    Csáki, Csaba; Randall, Lisa

    2016-07-01

    Recent LHC data hinted at a 750 GeV mass resonance that decays into two photons. A significant feature of this resonance is that its decays to any other Standard Model particles would be too low to be detected so far. Such a state has a compelling explanation in terms of a scalar or a pseudoscalar that is strongly coupled to vector states charged under the Standard Model gauge groups. Such a scenario is readily accommodated in bulk RS with a scalar localized in the bulk away from but close to the Higgs. Turning this around, we argue that a good way to find the elusive bulk RS model might be the search for a resonance with prominent couplings to gauge bosons.

  12. A stereoscopic look into the bulk

    Science.gov (United States)

    Czech, Bartlomiej; Lamprou, Lampros; McCandlish, Samuel; Mosk, Benjamin; Sully, James

    2016-07-01

    We present the foundation for a holographic dictionary with depth perception. The dictionary consists of natural CFT operators whose duals are simple, diffeomorphisminvariant bulk operators. The CFT operators of interest are the "OPE blocks," contributions to the OPE from a single conformal family. In holographic theories, we show that the OPE blocks are dual at leading order in 1 /N to integrals of effective bulk fields along geodesics or homogeneous minimal surfaces in anti-de Sitter space. One widely studied example of an OPE block is the modular Hamiltonian, which is dual to the fluctuation in the area of a minimal surface. Thus, our operators pave the way for generalizing the Ryu-Takayanagi relation to other bulk fields.

  13. Bulk amorphous Mg-based alloys

    DEFF Research Database (Denmark)

    Pryds, Nini

    2004-01-01

    The present paper describes the preparation and properties of bulk amorphous quarternary Mg-based alloys and the influence of additional elements on the ability of the alloy to form bulk amorphous. The main goal is to find a Mg-based alloy system which shows both high strength to weight ratio...... and a low glass transition temperature. The alloys were prepared by using a relatively simple technique, i.e. rapid cooling of the melt in a copper wedge mould. The essential structural changes that are achieved by going from the amorphous to the crystalline state through the supercooled liquid state...... are discussed in this paper. On the basis of these measurements phase diagrams of the different systems were constructed. Finally, it is demonstrated that when pressing the bulk amorphous alloy onto a metallic dies at temperatures within the supercooled liquid region, the alloy faithfully replicates the surface...

  14. Orchestrating Bulk Data Movement in Grid Environments

    Energy Technology Data Exchange (ETDEWEB)

    Vazhkudai, SS

    2005-01-25

    Data Grids provide a convenient environment for researchers to manage and access massively distributed bulk data by addressing several system and transfer challenges inherent to these environments. This work addresses issues involved in the efficient selection and access of replicated data in Grid environments in the context of the Globus Toolkit{trademark}, building middleware that (1) selects datasets in highly replicated environments, enabling efficient scheduling of data transfer requests; (2) predicts transfer times of bulk wide-area data transfers using extensive statistical analysis; and (3) co-allocates bulk data transfer requests, enabling parallel downloads from mirrored sites. These efforts have demonstrated a decentralized data scheduling architecture, a set of forecasting tools that predict bandwidth availability within 15% error and co-allocation architecture, and heuristics that expedites data downloads by up to 2 times.

  15. Bulk fields from the boundary OPE

    CERN Document Server

    Guica, Monica

    2016-01-01

    Previous work has established an equality between the geodesic integral of a free bulk field in AdS and the contribution of the conformal descendants of its dual CFT primary operator to the OPE of two other operators inserted at the endpoints of the geodesic. Working in the context of AdS$_3$/CFT$_2$, we extend this relation to include all $1/N$ corrections to the bulk field obtained by dressing it with i) a $U(1)$ current and ii) the CFT stress tensor, and argue it equals the contribution of the Ka\\v{c}-Moody/the Virasoro block to the respective boundary OPE. This equality holds for a particular framing of the bulk field to the boundary that involves a split Wilson line.

  16. Multiphase composites with extremal bulk modulus

    DEFF Research Database (Denmark)

    Gibiansky, L. V.; Sigmund, Ole

    2000-01-01

    This paper is devoted to the analytical and numerical study of isotropic elastic composites made of three or more isotropic phases. The ranges of their effective bulk and shear moduli are restricted by the Hashin-Shtrikman-Walpole (HSW) bounds. For two-phase composites, these bounds are attainable......, that is, there exist composites with extreme bulk and shear moduli. For multiphase composites, they may or may not be attainable depending on phase moduli and volume fractions. Sufficient conditions of attainability of the bounds and various previously known and new types of optimal composites...... are described. Most of our new results are related to the two-dimensional problem. A numerical topology optimization procedure that solves the inverse homogenization problem is adopted and used to look for two-dimensional three-phase composites with a maximal effective bulk modulus. For the combination...

  17. Bulk Comptonization by Turbulence in Accretion Disks

    CERN Document Server

    Kaufman, J

    2016-01-01

    Radiation pressure dominated accretion discs around compact objects may have turbulent velocities that greatly exceed the electron thermal velocities within the disc. Bulk Comptonization by the turbulence may therefore dominate over thermal Comptonization in determining the emergent spectrum. Bulk Comptonization by divergenceless turbulence is due to radiation viscous dissipation only. It can be treated as thermal Comptonization by solving the Kompaneets equation with an equivalent "wave" temperature, which is a weighted sum over the power present at each scale in the turbulent cascade. Bulk Comptonization by turbulence with non-zero divergence is due to both pressure work and radiation viscous dissipation. Pressure work has negligible effect on photon spectra in the limit of optically thin turbulence, and in this limit radiation viscous dissipation alone can be treated as thermal Comptonization with a temperature equivalent to the full turbulent power. In the limit of extremely optically thick turbulence, ra...

  18. A Diphoton Resonance from Bulk RS

    CERN Document Server

    Csaki, Csaba

    2016-01-01

    Recent LHC data hints at a 750 GeV mass resonance that decays into two photons. A significant feature of this resonance is that its decays to Higges and to any other Standard Model particles are so far too low to be detected. Such a state has a compelling explanation in terms of a scalar or a pseudoscalar that is strongly coupled to vector states charged under the Standard Model gauge groups. We argue that if the state is a scalar, some form of sequestering is likely to be necessary to naturally explain the suppressed scalar-Higgs interactions. Such a scenario is readily accommodated in bulk RS with a scalar localized in the bulk away from the Higgs. Turning this around, we argue that a good way to find the elusive bulk RS model might be the search for a resonance with prominent couplings to gauge bosons.

  19. Spherically symmetric brane spacetime with bulk gravity

    Science.gov (United States)

    Chakraborty, Sumanta; SenGupta, Soumitra

    2015-01-01

    Introducing term in the five-dimensional bulk action we derive effective Einstein's equation on the brane using Gauss-Codazzi equation. This effective equation is then solved for different conditions on dark radiation and dark pressure to obtain various spherically symmetric solutions. Some of these static spherically symmetric solutions correspond to black hole solutions, with parameters induced from the bulk. Specially, the dark pressure and dark radiation terms (electric part of Weyl curvature) affect the brane spherically symmetric solutions significantly. We have solved for one parameter group of conformal motions where the dark radiation and dark pressure terms are exactly obtained exploiting the corresponding Lie symmetry. Various thermodynamic features of these spherically symmetric space-times are studied, showing existence of second order phase transition. This phenomenon has its origin in the higher curvature term with gravity in the bulk.

  20. Bulk Vitrification Performance Enhancement: Refractory Lining Protection Against Molten Salt Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Hrma, Pavel R.; Bagaasen, Larry M.; Schweiger, Michael J.; Evans, Michael B.; Smith, Benjamin T.; Arrigoni, Benjamin M.; Kim, Dong-Sang; Rodriguez, Carmen P.; Yokuda, Satoru T.; Matyas, Josef; Buchmiller, William C.; Gallegos, Autumn B.; Fluegel, Alexander

    2007-08-06

    Bulk vitrification (BV) is a process that heats a feed material that consists of glass-forming solids and dried low-activity waste (LAW) in a disposable refractory-lined metal box using electrical power supplied through carbon electrodes. The feed is heated to the point that the LAW decomposes and combines with the solids to generate a vitreous waste form. This study supports the BV design and operations by exploring various methods aimed at reducing the quantities of soluble Tc in the castable refractory block portion of the refractory lining, which limits the effectiveness of the final waste form.

  1. Monitoring hydrate formation and dissociation in sandstone and bulk with magnetic resonance imaging.

    Science.gov (United States)

    Baldwin, B A; Moradi-Araghi, A; Stevens, J C

    2003-11-01

    Magnetic resonance imaging (MRI) has been shown to be a very effective tool for monitoring the formation and dissociation of hydrates because of the large intensity contrast between the images of the liquid components and the solid hydrate. Tetrahydrofuran/water hydrate was used because the two liquid components are miscible and form hydrate at ambient pressure. These properties made this feasibility study proceed much faster than using methane/water, which requires high pressure to form the hydrate. The formation and dissociation was monitored first in a THF/water-saturated Berea sandstone plug and second in the bulk. In both cases it appeared that nucleation was needed to begin the formation process, i.e., the presence of surfaces in the sandstone and shaking of the bulk solution. Dissociation appeared to be dominated by the rate of thermal energy transfer. The dissociation temperature of hydrate formed in the sandstone plug was not significantly different from the dissociation temperature in bulk.

  2. Development of software for handling ship's pharmacy.

    Science.gov (United States)

    Nittari, Giulio; Peretti, Alessandro; Sibilio, Fabio; Ioannidis, Nicholas; Amenta, Francesco

    2016-01-01

    Ships are required to carry a given amount of medicinal products and medications depending on the flag and the type of vessel. These medicines are stored in the so called ship's "medicine chest" or more properly - a ship pharmacy. Owing to the progress of medical sciences and to the increase in the mean age of seafarers employed on board ships, the number of pharmaceutical products and medical devices required by regulations to be carried on board ships is increasing. This may make handling of the ship's medicine chest a problem primarily on large ships sailing on intercontinental routes due to the difficulty in identifying the correspondence between medicines obtained abroad with those available at the national market. To minimise these problems a tool named Pharmacy Ship (acronym: PARSI) has been developed. The application PARSI is based on a database containing the information about medicines and medical devices required by different countries regulations. In the first application the system was standardised to comply with the Italian regulations issued on the 1st October, 2015 which entered into force on the 18 January 2016. Thanks to PARSI it was possible to standardize the inventory procedures, facilitate the work of maritime health authorities and make it easier for the crew, not professional in the field, to handle the 'medicine chest' correctly by automating the procedures for medicines management. As far as we know there are no other similar tools available at the moment. The application of the software, as well as the automation of different activities, currently carried out manually, will help manage (qualitatively and quantitatively) the ship's pharmacy. The system developed in this study has proved to be an effective tool which serves to guarantee the compliance of the ship pharmacy with regulations of the flag state in terms of medicinal products and medications. Sharing the system with the Telemedical Maritime Assistance Service may result in

  3. Building a framework for ergonomic research on laparoscopic instrument handles.

    Science.gov (United States)

    Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

    2016-06-01

    Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design.

  4. Towards an efficient retractor handle: an ergonomic study.

    Science.gov (United States)

    Brearley, S; Watson, H

    1983-11-01

    In a study whose aim was to design an ergonomically efficient retractor handle, surgeons' views on retractor design were canvassed by questionnaire. After observing retractors in use and measuring the forces involved peroperatively, prototype handles were made and tested in a laboratory. Experimental subjects showed a marked preference for a vertical 'T' configuration. Such a handle could easily be incorporated into most existing retractor designs.

  5. The prevention and handling of the missing data.

    Science.gov (United States)

    Kang, Hyun

    2013-05-01

    Even in a well-designed and controlled study, missing data occurs in almost all research. Missing data can reduce the statistical power of a study and can produce biased estimates, leading to invalid conclusions. This manuscript reviews the problems and types of missing data, along with the techniques for handling missing data. The mechanisms by which missing data occurs are illustrated, and the methods for handling the missing data are discussed. The paper concludes with recommendations for the handling of missing data.

  6. Making bulk-conductive glass microchannel plates

    Science.gov (United States)

    Yi, Jay J. L.; Niu, Lihong

    2008-02-01

    The fabrication of microchannel plate (MCP) with bulk-conductive characteristics has been studied. Semiconducting clad glass and leachable core glass were used for drawing fibers and making MCP. Co-axial single fiber was drawn from a platinum double-crucible in an automatic fiberizing system, and the fibers were stacked and redrawn into multifiber by a special gripping mechanism. The multifibers were stacked again and the boule was made and sliced into discs. New MCPs were made after chemically leaching process without the traditional hydrogen firing. It was shown that bulk-conductive glass MCP can operate at higher voltage with lower noise.

  7. "Work-Hardenable" ductile bulk metallic glass.

    Science.gov (United States)

    Das, Jayanta; Tang, Mei Bo; Kim, Ki Buem; Theissmann, Ralf; Baier, Falko; Wang, Wei Hua; Eckert, Jürgen

    2005-05-27

    Usually, monolithic bulk metallic glasses undergo inhomogeneous plastic deformation and exhibit poor ductility (< 1%) at room temperature. We present a new class of bulk metallic glass, which exhibits high strength of up to 2265 MPa together with extensive "work hardening" and large ductility of 18%. Significant increase in the flow stress was observed during deformation. The "work-hardening" capability and ductility of this class of metallic glass is attributed to a unique structure correlated with atomic-scale inhomogeneity, leading to an inherent capability of extensive shear band formation, interactions, and multiplication of shear bands.

  8. Synthesis of Bulk Superconducting Magnesium Diboride

    Directory of Open Access Journals (Sweden)

    Margie Olbinado

    2002-06-01

    Full Text Available Bulk polycrystalline superconducting magnesium diboride, MgB2, samples were successfully prepared via a one-step sintering program at 750°C, in pre Argon with a pressure of 1atm. Both electrical resistivity and magnetic susceptibility measurements confirmed the superconductivity of the material at 39K, with a transition width of 5K. The polycrystalline nature, granular morphology, and composition of the sintered bulk material were confirmed using X-ray diffractometry (XRD, scanning electron microscopy (SEM, and energy dispersive X-ray analysis (EDX.

  9. Towards a Reconstruction of General Bulk Metrics

    CERN Document Server

    Engelhardt, Netta

    2016-01-01

    We prove that the metric of a general holographic spacetime can be reconstructed (up to an overall conformal factor) from distinguished spatial slices - "light-cone cuts" - of the conformal boundary. Our prescription is covariant and applies to bulk points in causal contact with the boundary. Furthermore, we describe a procedure for determining the light-cone cuts corresponding to bulk points in the causal wedge of the boundary in terms of the divergences of correlators in the dual field theory. Possible extensions for determining the conformal factor and including the cuts of points outside of the causal wedge are discussed. We also comment on implications for subregion/subregion duality.

  10. Automation of 3D micro object handling process

    DEFF Research Database (Denmark)

    Gegeckaite, Asta; Hansen, Hans Nørgaard

    2007-01-01

    Most of the micro objects in industrial production are handled with manual labour or in semiautomatic stations. Manual labour usually makes handling and assembly operations highly flexible, but slow, relatively imprecise and expensive. Handling of 3D micro objects poses special challenges due...... to the small absolute scale. In this article, the results of the pick-and-place operations of three different 3D micro objects were investigated. This study shows that depending on the correct gripping tool design as well as handling and assembly scenarios, a high success rate of up to 99% repeatability can...

  11. Human handling promotes compliant behavior in adult laboratory rabbits.

    Science.gov (United States)

    Swennes, Alton G; Alworth, Leanne C; Harvey, Stephen B; Jones, Carolyn A; King, Christopher S; Crowell-Davis, Sharon L

    2011-01-01

    Routine laboratory procedures can be stressful for laboratory animals. We wanted to determine whether human handling of adult rabbits could induce a degree of habituation, reducing stress and facilitating research-related manipulation. To this end, adult New Zealand white rabbits were handled either frequently or minimally. After being handled over 3 wk, these rabbits were evaluated by novel personnel and compared with minimally handled controls. Evaluators subjectively scored the rabbits for their relative compliance or resistance to being scruffed and removed from their cages, being transported to a treatment room, and their behavior at all stages of the exercise. Upon evaluation, handled rabbits scored significantly more compliant than nontreated controls. During evaluation, behaviors that the rabbits displayed when they were approached in their cages and while being handled outside their cages were recorded and compared between study groups. Handled rabbits displayed behavior consistent with a reduction in human-directed fear. This study illustrates the potential for handling to improve compliance in laboratory procedures and reduce fear-related behavior in laboratory rabbits. Such handling could be used to improve rabbit welfare through the reduction of stress and exposure to novel stimuli.

  12. Cooper-Harper Experience Report for Spacecraft Handling Qualities Applications

    Science.gov (United States)

    Bailey, Randall E.; Jackson, E. Bruce; Bilimoria, Karl D.; Mueller, Eric R.; Frost, Chad R.; Alderete, Thomas S.

    2009-01-01

    A synopsis of experience from the fixed-wing and rotary-wing aircraft communities in handling qualities development and the use of the Cooper-Harper pilot rating scale is presented as background for spacecraft handling qualities research, development, test, and evaluation (RDT&E). In addition, handling qualities experiences and lessons-learned from previous United States (US) spacecraft developments are reviewed. This report is intended to provide a central location for references, best practices, and lessons-learned to guide current and future spacecraft handling qualities RDT&E.

  13. MVAPACK: a complete data handling package for NMR metabolomics.

    Science.gov (United States)

    Worley, Bradley; Powers, Robert

    2014-05-16

    Data handling in the field of NMR metabolomics has historically been reliant on either in-house mathematical routines or long chains of expensive commercial software. Thus, while the relatively simple biochemical protocols of metabolomics maintain a low barrier to entry, new practitioners of metabolomics experiments are forced to either purchase expensive software packages or craft their own data handling solutions from scratch. This inevitably complicates the standardization and communication of data handling protocols in the field. We report a newly developed open-source platform for complete NMR metabolomics data handling, MVAPACK, and describe its application on an example metabolic fingerprinting data set.

  14. Pre-mortem handling effect on the meat quality

    Directory of Open Access Journals (Sweden)

    Jorgue Hernandez-Bautista

    2013-12-01

    Full Text Available The main characteristics that define meat quality are the physicochemical, organoleptic and microbiological properties. These characteristics are influenced by like production system, racial group, feed, transport, ante-mortem animals handling and post-mortem meat handling. The ante-mortem handling is very important, where stress physiology and the factors that provoke it (fasting, transportation, stunning, specie and their effect in each step of the ante-mortem handling is reflected in final meat quality (pH, conductivity, color, water holding capacity and shelf life.

  15. Titania doping effect on superconducting properties of MgB2 bulk samples

    Science.gov (United States)

    Serrano, G.; Bridoux, G.; Serquis, A.

    2009-05-01

    In this work we study the microstructural and superconducting properties of doped and undoped bulk MgB2 samples prepared by solid-state reaction, with 0 and 2.5 %at. nominal TiO2 nanotubes contents, annealed at different temperatures in the 750-900°C range. We discuss the Tc, Jc and Hc2 performance and their correlation with the different synthesis parameters.

  16. Titania doping effect on superconducting properties of MgB{sub 2} bulk samples

    Energy Technology Data Exchange (ETDEWEB)

    Serrano, G; Serquis, A [Institute Balseiro - Centra Atomico Bariloche and CONICET, (8400) S. C. de Bariloche, Rio Negro (Argentina); Bridoux, G, E-mail: serranog@ib.cnea.gov.a [Institute Balseiro - Centra Atomico Bariloche, (8400) S. C. de Bariloche, Rio Negro (Argentina)

    2009-05-01

    In this work we study the microstructural and superconducting properties of doped and undoped bulk MgB{sub 2} samples prepared by solid-state reaction, with 0 and 2.5 %at. nominal TiO{sub 2} nanotubes contents, annealed at different temperatures in the 750-900 deg. C range. We discuss the T{sub c}, J{sub c} and H{sub c2} performance and their correlation with the different synthesis parameters.

  17. Mars Sample Handling and Requirements Panel (MSHARP)

    Science.gov (United States)

    Carr, Michael H.; McCleese, Daniel J.; Bada, Jeffrey L.; Bogard, Donald D.; Clark, Benton C.; DeVincenzi, Donald; Drake, Michael J.; Nealson, Kenneth H.; Papike, James J.; Race, Margaret S.; Stahl, David

    1999-01-01

    In anticipation of the return of samples from Mars toward the end of the first decade of the next century, NASA's Office of Space Sciences chartered a panel to examine how Mars samples should be handled. The panel was to make recommendations in three areas: (1) sample collection and transport back to Earth; (2) certification of the samples as nonhazardous; and (3) sample receiving, curation, and distribution. This report summarizes the findings of that panel. The samples should be treated as hazardous until proven otherwise. They are to be sealed within a canister on Mars, and the canister is not to be opened until within a Biosafety Hazard Level 4 (BSL-4) containment facility here on Earth. This facility must also meet or exceed the cleanliness requirements of the Johnson Space Center (JSC) facility for curation of extraterrestrial materials. A containment facility meeting both these requirements does not yet exist. Hazard assessment and life detection experiments are to be done at the containment facility, while geochemical characterization is being performed on a sterilized subset of the samples released to the science community. When and if the samples are proven harmless, they are to be transferred to a curation facility, such as that at JSC.

  18. Valve Concepts for Microfluidic Cell Handling

    Directory of Open Access Journals (Sweden)

    M. Grabowski

    2010-01-01

    Full Text Available In this paper we present various pneumatically actuated microfluidic valves to enable user-defined fluid management within a microfluidic chip. To identify a feasible valve design, certain valve concepts are simulated in ANSYS to investigate the pressure dependent opening and closing characteristics of each design. The results are verified in a series of tests. Both the microfluidic layer and the pneumatic layer are realized by means of soft-lithographic techniques. In this way, a network of channels is fabricated in photoresist as a molding master. By casting these masters with PDMS (polydimethylsiloxane we get polymeric replicas containing the channel network. After a plasma-enhanced bonding process, the two layers are irreversibly bonded to each other. The bonding is tight for pressures up to 2 bar. The valves are integrated into a microfluidic cell handling system that is designed to manipulate cells in the presence of a liquid reagent (e.g. PEG – polyethylene glycol, for cell fusion. For this purpose a user-defined fluid management system is developed. The first test series with human cell lines show that the microfluidic chip is suitable for accumulating cells within a reaction chamber, where they can be flushed by a liquid medium.

  19. Whole Teflon valves for handling droplets.

    Science.gov (United States)

    Cybulski, Olgierd; Jakiela, Slawomir; Garstecki, Piotr

    2016-06-21

    We propose and test a new whole-Teflon gate valve for handling droplets. The valve allows droplet plugs to pass through without disturbing them. This is possible due to the geometric design, the choice of material and lack of any pulses of flow generated by closing or opening the valve. The duct through the valve resembles a simple segment of tubing, without constrictions, change in lumen or side pockets. There are no extra sealing materials with different wettability or chemical resistance. The only material exposed to liquids is FEP Teflon, which is resistant to aggressive chemicals and fully biocompatible. The valve can be integrated into microfluidic systems: we demonstrate a complex system for culturing bacteria in hundreds of microliter droplet chemostats. The valve effectively isolates modules of the system to increase precision of operations on droplets. We verified that the valve allowed millions of droplet plugs to safely pass through, without any cross-contamination with bacteria between the droplets. The valve can be used in automating complex microfluidic systems for experiments in biochemistry, biology and organic chemistry.

  20. The NOAO KOSMOS Data Handling System

    CERN Document Server

    Seaman, Rob

    2015-01-01

    KOSMOS and COSMOS are twin high-efficiency imaging spectrographs that have been deployed as NOAO facility instruments for the Mayall 4-meter telescope on Kitt Peak in Arizona and for the Blanco telescope on Cerro Tololo in Chile, respectively. The NOAO Data Handling System (DHS) has seen aggressive use over several years at both the Blanco and Mayall telescopes with NEWFIRM (the NOAO Extremely Wide-Field Infrared Imager) and the Mosaic-1.1 wide-field optical imager. Both of these instruments also rely on the Monsoon array controller and related software, and on instrument-specific versions of the NOAO Observation Control System (NOCS). NOCS, Monsoon and DHS are thus a well-tested software suite that was adopted by the KOSMOS project. This document describes the specifics of the KOSMOS implementation of DHS, in particular in support of the original two-amplifier e2v 2Kx4K CCD detectors with which the instruments were commissioned. The emphasis will be on the general layout of the DHS software components and th...

  1. Sludge Bulking Prediction Using Principle Component Regression and Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    Inchio Lou

    2012-01-01

    Full Text Available Sludge bulking is the most common solids settling problem in wastewater treatment plants, which is caused by the excessive growth of filamentous bacteria extending outside the flocs, resulting in decreasing the wastewater treatment efficiency and deteriorating the water quality in the effluent. Previous studies using molecular techniques have been widely used from the microbiological aspects, while the mechanisms have not yet been completely understood to form the deterministic cause-effect relationship. In this study, system identification techniques based on the analysis of the inputs and outputs of the activated sludge system are applied to the data-driven modeling. Principle component regression (PCR and artificial neural network (ANN were identified using the data from Chongqing wastewater treatment plant (CQWWTP, including temperature, pH, biochemical oxygen demand (BOD, chemical oxygen demand (COD, suspended solids (SSs, ammonia (NH4+, total nitrogen (TN, total phosphorus (TP, and mixed liquor suspended solids (MLSSs. The models were subsequently used to predict the sludge volume index (SVI, the indicator of the bulking occurrence. Comparison of the results obtained by both models is also presented. The results showed that ANN has better prediction power (R2=0.9 than PCR (R2=0.7 and thus provides a useful guide for practical sludge bulking control.

  2. Failure by fracture in bulk metal forming

    DEFF Research Database (Denmark)

    Silva, C.M.A.; Alves, Luis M.; Nielsen, Chris Valentin

    2015-01-01

    This paper revisits formability in bulk metal forming in the light of fundamental concepts of plasticity,ductile damage and crack opening modes. It proposes a new test to appraise the accuracy, reliability and validity of fracture loci associated with crack opening by tension and out-of-plane she...

  3. THE OPTIMIZATION OF PLUSH YARNS BULKING PROCESS

    Directory of Open Access Journals (Sweden)

    VINEREANU Adam

    2014-05-01

    Full Text Available This paper presents the experiments that were conducted on the installation of continuous bulking and thermofixing “SUPERBA” type TVP-2S for optimization of the plush yarns bulking process. There were considered plush yarns Nm 6.5/2, made of the fibrous blend of 50% indigenous wool sort 41 and 50% PES. In the first stage, it performs a thermal treatment with a turboprevaporizer at a temperature lower than thermofixing temperature, at atmospheric pressure, such that the plush yarns - deposed in a freely state on a belt conveyor - are uniformly bulking and contracting. It was followed the mathematical modeling procedure, working with a factorial program, rotatable central composite type, and two independent variables. After analyzing the parameters that have a direct influence on the bulking degree, there were selected the pre-vaporization temperature (coded x1,oC and the velocity of belt inside pre-vaporizer (coded x 2, m/min. As for the dependent variable, it was chosen the plush yarn diameter (coded y, mm. There were found the coordinates of the optimal point, and then this pair of values was verified in practice. These coordinates are: x1optim= 90oC and x 2optim= 6.5 m/min. The conclusion is that the goal was accomplished: it was obtained a good cover degree f or double-plush carpets by reducing the number of tufts per unit surface.

  4. Forming of bulk metallic glass microcomponents

    DEFF Research Database (Denmark)

    Wert, John A.; Thomsen, Christian; Jensen, Rune Debel

    2009-01-01

    The present article considers forward extrusion, closed-die forging and backward extrusion processes for fabrication of individual microcomponents from two bulk metallic glass (BMG) compositions: Mg60Cu30Y10 and Zr44Cu40Ag8Al8. Two types of tooling were used in the present work: relatively massive...

  5. Bulk viscosity effects on ultrasonic thermoacoustic instability

    Science.gov (United States)

    Lin, Jeffrey; Scalo, Carlo; Hesselink, Lambertus

    2016-11-01

    We have carried out unstructured fully-compressible Navier-Stokes simulations of a minimal-unit traveling-wave ultrasonic thermoacoustic device in looped configuration. The model comprises a thermoacoustic stack with 85% porosity and a tapered area change to suppress the fundamental standing-wave mode. A bulk viscosity model, which accounts for vibrational and rotational molecular relaxation effects, is derived and implemented via direct modification of the viscous stress tensor, τij ≡ 2 μSij +λ/2 μ ∂uk/∂xk δij , where the bulk viscosity is defined by μb ≡ λ +2/3 μ . The effective bulk viscosity coefficient accurately captures acoustic absorption from low to high ultrasonic frequencies and matches experimental wave attenuation rates across five decades. Using pressure-based similitude, the model was downscaled from total length L = 2 . 58 m to 0 . 0258 m, corresponding to the frequency range f = 242 - 24200 Hz, revealing the effects of bulk viscosity and direct modification of the thermodynamic pressure. Simulations are carried out to limit cycle and exhibit growth rates consistent with linear stability analyses, based on Rott's theory.

  6. Longitudinal bulk a coustic mass sensor

    DEFF Research Database (Denmark)

    Hales, Jan Harry; Teva, Jordi; Boisen, Anja;

    2009-01-01

    Design, fabrication and characterization, in terms of mass sensitivity, is presented for a polycrystalline silicon longitudinal bulk acoustic cantilever. The device is operated in air at 51 MHz, resulting in a mass sensitivity of 100 HZ/fg (1 fg = 10{su−15 g). The initial characterization...

  7. Winterization strategies for bulk storage of pickles

    Science.gov (United States)

    Cucumbers are commercially fermented and stored in bulk in outdoor open top fiberglass tanks. During winter, snow and ice accumulates around and on top of tanks influencing heat transfer in an unpredictable manner, often compromising the fruit quality. This study evaluates the performance of inexpen...

  8. A Stereoscopic Look into the Bulk

    CERN Document Server

    Czech, Bartlomiej; McCandlish, Samuel; Mosk, Benjamin; Sully, James

    2016-01-01

    We present the foundation for a holographic dictionary with depth perception. The dictionary consists of natural CFT operators whose duals are simple, diffeomorphism-invariant bulk operators. The CFT operators of interest are the "OPE blocks," contributions to the OPE from a single conformal family. In holographic theories, we show that the OPE blocks are dual at leading order in 1/N to integrals of effective bulk fields along geodesics or homogeneous minimal surfaces in anti-de Sitter space. One widely studied example of an OPE block is the modular Hamiltonian, which is dual to the fluctuation in the area of a minimal surface. Thus, our operators pave the way for generalizing the Ryu-Takayanagi relation to other bulk fields. Although the OPE blocks are non-local operators in the CFT, they admit a simple geometric description as fields in kinematic space--the space of pairs of CFT points. We develop the tools for constructing local bulk operators in terms of these non-local objects. The OPE blocks also allow ...

  9. Fluctuating brane in a dilatonic bulk

    CERN Document Server

    Brax, P; Rodríguez-Martinez, M; Brax, Philippe; Langlois, David; Rodriguez-Martinez, Maria

    2003-01-01

    We consider a cosmological brane moving in a static five-dimensional bulk spacetime endowed with a scalar field whose potential is exponential. After studying various cosmological behaviours for the homogeneous background, we investigate the fluctuations of the brane that leave spacetime unaffected. A single mode embodies these fluctuations and obeys a wave equation which we study for bouncing and ever-expanding branes.

  10. Meteoroid Bulk Density and Ceplecha Types

    Science.gov (United States)

    Blaauw, R. C.; Moser, D. E.; Moorhead, A. V.

    2017-01-01

    The determination of asteroid bulk density is an important aspect of Near Earth Object (NEO) characterization. A fraction of meteoroids originate from asteroids (including some NEOs), thus in lieu of mutual perturbations, satellites, or expensive spacecraft missions, a study of meteoroid bulk densities can potentially provide useful insights into the densities of NEOs and PHOs (Potentially Hazardous Objects). Meteoroid bulk density is still inherently difficult to measure, and is most often determined by modeling the ablation of the meteoroid. One approach towards determining a meteoroid density distribution entails using a more easily measured proxy for the densities, then calibrating the proxy with known densities from meteorite falls, ablation modelling, and other sources. An obvious proxy choice is the Ceplecha type, KB (Ceplecha, 1958), which is thought to indicate the strength of a meteoroid and often correlated to different bulk densities in literature. KB is calculated using the air density at the beginning height of the meteor, the initial velocity, and the zenith angle of the radiant; quantities more readily determined than meteoroid bulk density itself. Numerical values of K(sub B) are sorted into groups (A, B, C, etc.), which have been matched to meteorite falls or meteor showers with known composition such as the porous Draconids. An extensive survey was conducted to establish the strength of the relationship between bulk density and K(sub B), specifically looking at those that additionally determined K(sub B) for the meteors. In examining the modeling of high-resolution meteor data from Kikwaya et al. (2011), the correlation between K(sub B) and bulk density was not as strong as hoped. However, a distinct split by dynamical type was seen with Jovian Tisserand parameter (T(sub J)), with meteoroids from Halley Type comets (T(sub J) densities than those originating from Jupiter Family comets and asteroids (T(sub J) > 2). Therefore, this work indicates

  11. Development of Lithium Stuffed Garnet-Type Oxide Solid Electrolytes with High Ionic Conductivity for Application to All-Solid-State Batteries

    Directory of Open Access Journals (Sweden)

    Ryoji Inada

    2016-07-01

    Full Text Available All-solid-state lithium-ion battery (LiB is expected as one of the next generation energy storage devices because of their high energy density, high safety and excellent cycle stability. Although oxide-based solid electrolyte materials have rather lower conductivity and poor deformability than sulfide-based one, they have other advantages such as their chemical stability and easiness for handling. Among the various oxide-based SEs, lithium stuffed garnet-type oxide with the formula of Li7La3Zr2O12 (LLZ have been widely studied because of their high conductivity above 10-4 Scm-1 at room temperature, excellent thermal performance and stability against Li metal anode.Here, we present our recent progress for the development of garnet-type solid electrolytes with high conductivity by simultaneous substitution of Ta5+ into Zr4+ site and Ba2+ into La3+ site in LLZ. Li+ concentration was fixed to 6.5 per chemical formulae, so that the formulae of our Li garnet-type oxide is expressed as Li6.5La3-xBaxZr1.5-xTa0.5+xO12 (LLBZT and Ba contents x are changed from 0 to 0.3. As results, all LLBZT samples have cubic garnet structure without containing any secondary phases. The lattice parameters of LLBZT decrease with increasing Ba2+ contents x < 0.10 while increase with x from 0.10 to 0.30, possibly due to the simultaneous change of Ba2+ and Ta5+ substitution levels. Relative densities of LLBZT are in the range between 89% and 93% and not influenced so much by the compositions. From AC impedance spectroscopy measurements, the total (bulk + grain conductivity at 27ºC of LLBZT shows its maximum value of 8.34 x 10-4 S cm-1 at x = 0.10, which is slightly higher than the conductivity (= 7.94 x 10-4 S cm-1 of LLZT without substituting Ba (x = 0. Activation energy of the conductivity tends to become lower by Ba substation, while excess Ba substitution degrades the conductivity in LLBZT. LLBZT has wide electrochemical potential window of 0-6 V vs. Li+/Li and

  12. Integration of bulk piezoelectric materials into microsystems

    Science.gov (United States)

    Aktakka, Ethem Erkan

    Bulk piezoelectric ceramics, compared to deposited piezoelectric thin-films, provide greater electromechanical coupling and charge capacity, which are highly desirable in many MEMS applications. In this thesis, a technology platform is developed for wafer-level integration of bulk piezoelectric substrates on silicon, with a final film thickness of 5-100microm. The characterized processes include reliable low-temperature (200°C) AuIn diffusion bonding and parylene bonding of bulk-PZT on silicon, wafer-level lapping of bulk-PZT with high-uniformity (+/-0.5microm), and low-damage micro-machining of PZT films via dicing-saw patterning, laser ablation, and wet-etching. Preservation of ferroelectric and piezoelectric properties is confirmed with hysteresis and piezo-response measurements. The introduced technology offers higher material quality and unique advantages in fabrication flexibility over existing piezoelectric film deposition methods. In order to confirm the preserved bulk properties in the final film, diaphragm and cantilever beam actuators operating in the transverse-mode are designed, fabricated and tested. The diaphragm structure and electrode shapes/sizes are optimized for maximum deflection through finite-element simulations. During tests of fabricated devices, greater than 12microm PP displacement is obtained by actuation of a 1mm2 diaphragm at 111kHz with management IC, which incorporates a supply-independent bias circuitry, an active diode for low-dropout rectification, a bias-flip system for higher efficiency, and a trickle battery charger. The overall system does not require a pre-charged battery, and has power consumption of sleep-mode (simulated). Under lg vibration at 155Hz, a 70mF ultra-capacitor is charged from OV to 1.85V in 50 minutes.

  13. Present E-waste Handling and Disposal Scenario in India: Planning for Future Management

    Directory of Open Access Journals (Sweden)

    Dipsikha Dasgupta

    2015-05-01

    Full Text Available In developing country like India E-waste management is being reckoned as a challenging task due to unplanned discarding of E-waste along with municipal solid waste. A “systematic & scientific” trade chain of E-waste is essential to manage the present scenario both in terms of environmental protection and health perspective. The prevalence of informal E-waste handling in India has put forward several issues of concern (metals, plastic, informal recycling that need to be addressed to protect environment and human health. One of the important aspects of current informal handling of E-waste is its recycling to minimize exposure level. However, it needs skillful protocol (formal handling to ensure the implementation of policy. Legal frame work is another essential part that will also help in E-waste management even in grass root level. A comprehensive E-waste management plan is also needed to improve disposal practice (recycling, landfill, and reuse to reduce the magnitude of exposure notably toxic metals and flame retardants. A multistage approach has been recommended as per policy guideline for the trade chain practionners which will provide benefits to control exposure as well as environmental risk.

  14. 46 CFR 148.04-23 - Unslaked lime in bulk.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Unslaked lime in bulk. 148.04-23 Section 148.04-23... HAZARDOUS MATERIALS IN BULK Special Additional Requirements for Certain Material § 148.04-23 Unslaked lime in bulk. (a) Unslaked lime in bulk must be transported in unmanned, all steel, double-hulled...

  15. [Clinical Handling of Patients with Dissociative Disorders].

    Science.gov (United States)

    Okano, Kenichiro

    2015-01-01

    This paper discusses the way informed psychiatrists are expected to handle dissociative patients in clinical situations, with a specific focus on dissociative identity disorders and dissociative fugue. On the initial interview with dissociative patients, information on their history of trauma and any nascent dissociative symptoms in their childhood should be carefully obtained. Their level of stress in their current life should also be assessed in order to understand their symptomatology, as well as to predict their future clinical course. A psychoeducational approach is crucial; it might be helpful to give information on dissociative disorder to these patients as well as their family members in order to promote their adherence to treatment. Regarding the symptomatology of dissociative disorders, detailed symptoms and the general clinical course are presented. It was stressed that dissociative identity disorder and dissociative fugue, the most high-profile dissociative disorders, are essentially different in their etiology and clinical presentation. Dissociative disorders are often confused with and misdiagnosed as psychotic disorders, such as schizophrenia. Other conditions considered in terms of the differential diagnosis include borderline personality disorder as well as temporal lobe epilepsy. Lastly, the therapeutic approach to dissociative identity disorder is discussed. Each dissociative identity should be understood as potentially representing some traumatically stressful event in the past. The therapist should be careful not to excessively promote the creation or elaboration of any dissociative identities. Three stages are proposed in the individual psychotherapeutic process. In the initial stage, a secure environment and stabilization of symptoms should be sought. The second stage consists of aiding the "host" personality to make use of other more adaptive coping skills in their life. The third stage involves coaching as well as continuous awareness of

  16. Handling Protest Responses in Contingent Valuation Surveys.

    Science.gov (United States)

    Pennington, Mark; Gomes, Manuel; Donaldson, Cam

    2017-08-01

    Protest responses, whereby respondents refuse to state the value they place on the health gain, are commonly encountered in contingent valuation (CV) studies, and they tend to be excluded from analyses. Such an approach will be biased if protesters differ from non-protesters on characteristics that predict their responses. The Heckman selection model has been commonly used to adjust for protesters, but its underlying assumptions may be implausible in this context. We present a multiple imputation (MI) approach to appropriately address protest responses in CV studies, and compare it with the Heckman selection model. This study exploits data from the multinational EuroVaQ study, which surveyed respondents' willingness-to-pay (WTP) for a Quality Adjusted Life Year (QALY). Here, our simulation study assesses the relative performance of MI and Heckman selection models across different realistic settings grounded in the EuroVaQ study, including scenarios with different proportions of missing data and non-response mechanisms. We then illustrate the methods in the EuroVaQ study for estimating mean WTP for a QALY gain. We find that MI provides lower bias and mean squared error compared with the Heckman approach across all considered scenarios. The simulations suggest that the Heckman approach can lead to considerable underestimation or overestimation of mean WTP due to violations in the normality assumption, even after log-transforming the WTP responses. The case study illustrates that protesters are associated with a lower mean WTP for a QALY gain compared with non-protesters, but that the results differ according to method for handling protesters. MI is an appropriate method for addressing protest responses in CV studies.

  17. Optimal event handling by multiple unmanned aerial vehicles

    NARCIS (Netherlands)

    Roo, de Martijn; Frasca, Paolo; Carloni, Raffaella

    2016-01-01

    This paper proposes a control architecture for a fleet of unmanned aerial vehicles that is responsible for handling the events that take place in a given area. The architecture guarantees that each event is handled by the required number of vehicles in the shortest time, while the rest of the fleet

  18. 45 CFR 650.19 - Electronic invention handling.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Electronic invention handling. 650.19 Section 650... PATENTS § 650.19 Electronic invention handling. (a) Grantees must use the iEdison Invention Information Management System maintained by the National Institutes of Health to disclose NSF subject inventions...

  19. Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

    Science.gov (United States)

    Lawrence, Ben

    2014-01-01

    This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

  20. Priming of Reach and Grasp Actions by Handled Objects

    Science.gov (United States)

    Masson, Michael E. J.; Bub, Daniel N.; Breuer, Andreas T.

    2011-01-01

    Pictures of handled objects such as a beer mug or frying pan are shown to prime speeded reach and grasp actions that are compatible with the object. To determine whether the evocation of motor affordances implied by this result is driven merely by the physical orientation of the object's handle as opposed to higher-level properties of the object,…

  1. How do new product development startups handle missing expertise?

    NARCIS (Netherlands)

    Eris, O.; van den Eijnden, W.; Roling, M.

    2014-01-01

    This paper presents a framework for how new product development focused startup firms (NPDSF) handle missing expertise. The dimensions of the framework are: strategies for handling missing expertise, channels used to acquire missing expertise, and a priori awareness, timing and nature of missing exp

  2. New Ergonomic Design Criteria for Handles of Laparoscopic Dissection Forceps

    NARCIS (Netherlands)

    Van Veelen, M.A.; Meijer, D.W.; Goossens, R.H.M.; Snijders, C.J.

    2001-01-01

    Background: The shape of laparoscopic instrument handles can cause physical discomfort. This problem may be ascribed to a lack of standards for instrument design. In this study, new ergonomic requirements for the design of laparoscopic dissection forceps were created. Three representative handles (a

  3. A Review of Missing Data Handling Methods in Education Research

    Science.gov (United States)

    Cheema, Jehanzeb R.

    2014-01-01

    Missing data are a common occurrence in survey-based research studies in education, and the way missing values are handled can significantly affect the results of analyses based on such data. Despite known problems with performance of some missing data handling methods, such as mean imputation, many researchers in education continue to use those…

  4. 9 CFR 2.131 - Handling of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Handling of animals. 2.131 Section 2.131 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.131 Handling of animals. (a) All licensees who maintain...

  5. WASTE HANDLING BUILDING FIRE PROTECTION SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J. D. Bigbee

    2000-06-21

    The Waste Handling Building Fire Protection System provides the capability to detect, control, and extinguish fires and/or mitigate explosions throughout the Waste Handling Building (WHB). Fire protection includes appropriate water-based and non-water-based suppression, as appropriate, and includes the distribution and delivery systems for the fire suppression agents. The Waste Handling Building Fire Protection System includes fire or explosion detection panel(s) controlling various detectors, system actuation, annunciators, equipment controls, and signal outputs. The system interfaces with the Waste Handling Building System for mounting of fire protection equipment and components, location of fire suppression equipment, suppression agent runoff, and locating fire rated barriers. The system interfaces with the Waste Handling Building System for adequate drainage and removal capabilities of liquid runoff resulting from fire protection discharges. The system interfaces with the Waste Handling Building Electrical Distribution System for power to operate, and with the Site Fire Protection System for fire protection water supply to automatic sprinklers, standpipes, and hose stations. The system interfaces with the Site Fire Protection System for fire signal transmission outside the WHB as needed to respond to a fire emergency, and with the Waste Handling Building Ventilation System to detect smoke and fire in specific areas, to protect building high-efficiency particulate air (HEPA) filters, and to control portions of the Waste Handling Building Ventilation System for smoke management and manual override capability. The system interfaces with the Monitored Geologic Repository (MGR) Operations Monitoring and Control System for annunciation, and condition status.

  6. 21 CFR 1250.32 - Food-handling operations.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Food-handling operations. 1250.32 Section 1250.32 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... operations. (a) All food-handling operations shall be accomplished so as to minimize the possibility of...

  7. 48 CFR 1852.211-70 - Packaging, handling, and transportation.

    Science.gov (United States)

    2010-10-01

    ... transportation. 1852.211-70 Section 1852.211-70 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND... and Clauses 1852.211-70 Packaging, handling, and transportation. As prescribed in 1811.404-70, insert the following clause: Packaging, Handling, and Transportation (SEPT 2005) (a) The Contractor...

  8. 8 CFR 207.5 - Waiting lists and priority handling.

    Science.gov (United States)

    2010-01-01

    ... REFUGEES § 207.5 Waiting lists and priority handling. Waiting lists are maintained for each designated refugee group of special humanitarian concern. Each applicant whose application is accepted for filing by... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Waiting lists and priority handling....

  9. 24 CFR 3282.256 - Distributor or dealer complaint handling.

    Science.gov (United States)

    2010-04-01

    ... handling. 3282.256 Section 3282.256 Housing and Urban Development Regulations Relating to Housing and Urban... HOUSING AND URBAN DEVELOPMENT MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS Dealer and Distributor Responsibilities § 3282.256 Distributor or dealer complaint handling. (a) When a distributor...

  10. 7 CFR 97.18 - Applications handled in confidence.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Applications handled in confidence. 97.18 Section 97.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING... confidence. (a) Pending applications shall be handled in confidence. Except as provided below, no information...

  11. Development of a gripper for handling and assembly of microscrews

    DEFF Research Database (Denmark)

    Gegeckaite, Asta; Hansen, Hans Nørgaard; Eriksson, Torbjörn

    2006-01-01

    This paper presents the development and design of a gripping tool, able to perform both handling and assembly of microscrews. The gripping tool presented here is a vacuum based gripper interacted with an automatic screwdriver. This construction is used in the handling and assembly of microscrews....

  12. 29 CFR 901.4 - Handling of disputes by Commission.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Handling of disputes by Commission. 901.4 Section 901.4 Labor Regulations Relating to Labor (Continued) CONSTRUCTION INDUSTRY COLLECTIVE BARGAINING COMMISSION POLICY STATEMENT ON COLLECTIVE BARGAINING DISPUTES AND APPLICABLE PROCEDURES § 901.4 Handling of disputes...

  13. Optimal event handling by multiple unmanned aerial vehicles

    NARCIS (Netherlands)

    de Roo, Martijn; Frasca, Paolo; Carloni, Raffaella

    This paper proposes a control architecture for a fleet of unmanned aerial vehicles that is responsible for handling the events that take place in a given area. The architecture guarantees that each event is handled by the required number of vehicles in the shortest time, while the rest of the fleet

  14. Design of liquid container handles in accordance with user preferences.

    Science.gov (United States)

    Jung, H S; Jung, H-S

    2008-03-01

    In this study, a prototype liquid container combined with auxiliary handles was designed to increase the safety of manual handling and to protect users of these containers from hand contamination. A Likert summated rating method as well as a pairwise ranking test was applied to evaluate the user preferences for handles provided for the container under the conditions of different shapes and positions. The results show that the participants preferred perpendicular orientation of the handle on the top of the liquid container while carrying the containers and the crosswise position of the handle at the side of the container while pouring the liquid. In order to satisfy both conditions, the container needs to be designed with handles in perpendicular as well as crosswise positions for selective application. A prototype liquid container with provided auxiliary handles was developed based on the results of the evaluation. It is recommended that a liquid container provides extra handles to reduce musculoskeletal stress and in turn increase user satisfaction.

  15. Relationships between the renal handling of DMPS and DMSA and the renal handling of mercury.

    Science.gov (United States)

    Zalups, Rudolfs K; Bridges, Christy C

    2012-09-17

    Within the body of this review, we provide updates on the mechanisms involved in the renal handling mercury (Hg) and the vicinal dithiol complexing/chelating agents, 2,3-bis(sulfanyl)propane-1-sulfonate (known formerly as 2,3-dimercaptopropane-1-sulfonate, DMPS) and meso-2,3-bis(sulfanyl)succinate (known formerly as meso-2,3-dimercaptosuccinate, DMSA), with a focus on the therapeutic effects of these dithiols following exposure to different chemical forms of Hg. We begin by reviewing briefly some of the chemical properties of Hg, with an emphasis on the high bonding affinity between mercuric ions and reduced sulfur atoms, principally those contained in protein and nonprotein thiols. A discussion is provided on the current body of knowledge pertaining to the handling of various mercuric species within the kidneys, focusing on the primary cellular targets that take up and are affected adversely by these species of Hg, namely, proximal tubular epithelial cells. Subsequently, we provide a brief update on the current knowledge on the handling of DMPS and DMSA in the kidneys. In particular, parallels are drawn between the mechanisms participating in the uptake of various thiol S-conjugates of Hg in proximal tubular cells and mechanisms by which DMPS and DMSA gain entry into these target epithelial cells. Finally, we discuss factors that permit DMPS and DMSA to bind intracellular mercuric ions and mechanisms transporting DMPS and DMSA S-conjugates of Hg out of proximal tubular epithelial cells into the luminal compartment of the nephron, and promoting urinary excretion.

  16. OPTIMIZATION PROCEDURE FOR PRELIMINARY DESIGN STAGE OF CAIRO-DAMIETTA SELF-PROPELLED GRAIN BULK SHIPS

    Directory of Open Access Journals (Sweden)

    M.M. Moustafa

    2016-01-01

    Full Text Available The global logistics center for the storage and handling of grain which will be constructed at Damietta port will extremely increase the annual movement of grain through Cairo-Damietta waterway. Therefore, the demand for inland grain bulk ships has increased significantly in the recent years. This paper introduces a procedure to find out the fleet size and optimum characteristics of self-propelled grain bulk ships working between Cairo and Damietta through River Nile. The characteristics of the Cairo–Damietta waterway are investigated to define the constraints on dimensions and speed for such ship type. Also, mathematical model for the objective function was developed considering: powering, voyage, weight, stability and cost calculation. In this research, Specific cost (Sc, cost of transporting one ton of cargo a distance of one kilometre, is considered as the objective function for this optimization process. This optimization problem is handled as a single objective nonlinear constrained optimization problem using a specially developed computer program. Solutions are generated by varying design variables systematically in certain steps. The best of these solutions is then taken as the estimated optimum. Finally, the problem is presented, the main constrains analyzed and the optimum solution shown.

  17. PRODUCTION OF NEW BIOMASS/WASTE-CONTAINING SOLID FUELS

    Energy Technology Data Exchange (ETDEWEB)

    David J. Akers; Glenn A. Shirey; Zalman Zitron; Charles Q. Maney

    2001-04-20

    CQ Inc. and its team members (ALSTOM Power Inc., Bliss Industries, McFadden Machine Company, and industry advisors from coal-burning utilities, equipment manufacturers, and the pellet fuels industry) addressed the objectives of the Department of Energy and industry to produce economical, new solid fuels from coal, biomass, and waste materials that reduce emissions from coal-fired boilers. This project builds on the team's commercial experience in composite fuels for energy production. The electric utility industry is interested in the use of biomass and wastes as fuel to reduce both emissions and fuel costs. In addition to these benefits, utilities also recognize the business advantage of consuming the waste byproducts of customers both to retain customers and to improve the public image of the industry. Unfortunately, biomass and waste byproducts can be troublesome fuels because of low bulk density, high moisture content, variable composition, handling and feeding problems, and inadequate information about combustion and emissions characteristics. Current methods of co-firing biomass and wastes either use a separate fuel receiving, storage, and boiler feed system, or mass burn the biomass by simply mixing it with coal on the storage pile. For biomass or biomass-containing composite fuels to be extensively used in the U.S., especially in the steam market, a lower cost method of producing these fuels must be developed that includes both moisture reduction and pelletization or agglomeration for necessary fuel density and ease of handling. Further, this method of fuel production must be applicable to a variety of combinations of biomass, wastes, and coal; economically competitive with current fuels; and provide environmental benefits compared with coal. Notable accomplishments from the work performed in Phase I of this project include the development of three standard fuel formulations from mixtures of coal fines, biomass, and waste materials that can be used in

  18. Uncertainties of stormwater characteristics and removal rates of stormwater treatment facilities: implications for stormwater handling.

    Science.gov (United States)

    Langeveld, J G; Liefting, H J; Boogaard, F C

    2012-12-15

    Stormwater runoff is a major contributor to the pollution of receiving waters. This study focuses at characterising stormwater in order to be able to determine the impact of stormwater on receiving waters and to be able to select the most appropriate stormwater handling strategy. The stormwater characterisation is based on determining site mean concentrations (SMCs) and their uncertainties as well as the treatability of stormwater by monitoring specific pollutants concentration levels (TSS, COD, BOD, TKN, TP, Pb, Cu, Zn, E.coli) at three full scale stormwater treatment facilities in Arnhem, the Netherlands. This has resulted in 106 storm events being monitored at the lamella settler, 59 at the high rate sand filter and 132 at the soil filter during the 2 year monitoring period. The stormwater characteristics in Arnhem in terms of SMCs for main pollutants TSS and COD and settling velocities differ from international data. This implies that decisions for stormwater handling made on international literature data will very likely be wrong due to assuming too high concentrations of pollutants and misjudgement of the treatability of stormwater. The removal rates monitored at the full scale treatment facilities are within the expected range, with the soil filter and the sand filter having higher removal rates than the lamella settler. The full scale pilots revealed the importance of incorporating gross solids removal in the design of stormwater treatment facilities, as the gross solids determine operation and maintenance requirements.

  19. Ergonomic redesign and evaluation of a clamping tool handle.

    Science.gov (United States)

    Jung, Myung-Chul; Hallbeck, M Susan

    2005-09-01

    The handle of a commercial bar clamp was redesigned using ergonomic principles and then compared with an original clamp. Ten male and ten female students participated in simulated clamping tasks under various conditions, including different clamping heights, clamping methods, and handle-gripping methods, with respect to the dependent variables of clamping and handle-squeezing forces. The results showed that the redesigned clamp produced larger clamping force with lower handle-squeezing forces than the original clamp. As expected, males exerted more force than females in both clamping and squeezing forces. A pistol grip method was superior to an upside-down handle-gripping method. Two-handed operation was recommended for this type of clamp by simultaneously pulling the trigger and sliding the bar in order to initially tighten around objects. This study shows that the application of ergonomic guidelines increases the efficiency and usability of manual handtools.

  20. Segment handling system prototype progress for Thirty Meter Telescope

    Science.gov (United States)

    Sofuku, Satoru; Ezaki, Yutaka; Kawaguchi, Noboru; Nakaoji, Toshitaka; Takaki, Junji; Horiuchi, Yasushi; Saruta, Yusuke; Haruna, Masaki; Kim, Ieyoung; Fukushima, Kazuhiko; Domae, Yukiyasu; Hatta, Toshiyuki; Yoshitake, Shinya; Hoshino, Hayato

    2016-07-01

    Segment Handling System (SHS) is the subsystem that is planned to be permanently implemented on Thirty Meter Telescope (TMT) telescope structure that enables fast, efficient, semi-automatic exchange of M1 segments. TMT plans challenging segment exchange (10 segments per 10 hours a day). To achieve these, MELCO develops innovative SHS by accommodating Factory Automation (FA) technology such as force control system and machine vision system into the system. Force control system used for install operation, achieves soft handling by detecting force exerted to mirror segment and automatically compensating the position error between handling segments and primary mirror. Machine vision system used for removal operation, achieves semi-automatic positioning between SHS and mirror segments to be handled. Prototype experience proves soft (extraneous force 300N) and fast ( 3 minutes) segment handling. The SHS will provide upcoming segmented large telescopes for cost-efficient, effortless, and safe segment exchange operation.