Fox, Adam T; Fertleman, Michael; Cahill, Pauline; Palmer, Roger D
The usage, derivation, and psychological, ethical, and legal aspects of slang terminology in medicine are discussed. The colloquial vocabulary is further described and a comprehensive glossary of common UK terms provided in appendix. This forms the first list of slang terms currently in use throughout the British medical establishment.
This annual report reviews the work of British Coal's Medical Service over the period 1988-89. Recruitment was at a lower level resulting in a reduction in the number of pre-employment medical examinations. Statistics are given for these, and for consultations during the year. The work of the rescue service is described. Results of surveys on the prevalence of pneumoconiosis in coal miners from 1961 to 1988 are presented in detail. The fall in prevalence continued. Continued attention has been paid to compliance with COSHH regulations, to encouraging the use of physiotherapy and to educating workers in lifting and handling methods. Following an incidence of Legionnaires Disease an investigation was carried out to identify the source of infection in an underground refrigeration plant. Studies on the mortality of coke workers have progressed. Reports are given on first aid and nursing services and on the administration of pethridine to injured miners.
Ibrahim, Michael; Fanshawe, Angela; Patel, Vanash; Goswami, Karan; Chilvers, Geoffrey; Ting, Michelle; Pilavakis, Yiannis; Rao, Christopher; Athanasiou, Thanos
The aim of this study was to identify factors that influence career choice in UK medical students. Students at seven institutions were invited to rate how important various factors were on influencing their career choices and how interested they were in pursuing different specialties. The influence of interpersonal relationship networks on career choice was also evaluated. 641 responses were collected. 44% (283) were male, 16% (105) were graduates and 41% (263) were final-year students. For Dermatology (p = 0.009), Paediatrics (p = 0.000), Radiology (p = 0.000), Emergency Medicine (p = 0.018) and Cardiothoracic Surgery (p = 0.000), there was a clear correlation between completing a clinical attachment and an interest in pursuing the specialty. Perceived characteristics of the speciality, individually and in clusters were considered important by specific subgroups of students, such as those interested in surgery. These students considered prestige (p = 0.0003), role models (p = 0.014), financial rewards after training (p = 0.0196) and technical challenge (p = 0.0011) as important factors. Demographics such as sex and age played a significant role in career choice. Interpersonal relationship networks do not have a significant influence on career intentions. This study shows that the career intentions of British medical students are influenced by their undergraduate experience and by the weight they place on different specialty-related factors.
Khawaja, Anthony P.; Chan, Michelle P.Y.; Broadway, David C.; Garway-Heath, David F.; Luben, Robert; Yip, Jennifer L.Y.; Hayat, Shabina; Wareham, Nicholas J.; Khaw, Kay-Tee; Foster, Paul J.
Objective To determine the association between systemic medication use and intraocular pressure (IOP) in a population of older British men and women. Design Population-based, cross-sectional study. Participants We included 7093 participants from the European Prospective Investigation into Cancer–Norfolk Eye Study. Exclusion criteria were a history of glaucoma therapy (medical, laser, or surgical), IOP asymmetry between eyes of >5 mmHg, and missing data for any covariables. The mean age of participants was 68 years (range, 48–92) and 56% were women. Methods We measured IOP using the Ocular Response Analyzer. Three readings were taken per eye and the best signal value of the Goldmann-correlated IOP value considered. Participants were asked to bring all their medications and related documentation to the health examination, and these were recorded by the research nurse using an electronic case record form. The medication classes examined were angiotensin-converting enzyme inhibitors, angiotensin-receptor blockers, α-blockers, β-blockers, calcium channel blockers, diuretics, nitrates, statins, insulin, biguanides, sulfonylureas, aspirin, and other nonsteroidal anti-inflammatory drugs. We examined associations between medication use and IOP using multivariable linear regression models adjusted for age, sex, and body mass index. Models containing diabetic medication were further adjusted for glycosylated hemoglobin levels. Main Outcome Measures Mean IOP of the right and left eyes. Results Use of systemic β-blockers (−0.92 mmHg; 95% CI, −1.19, −0.65; Pnitrates (−0.63 mmHg; 95% CI, −1.12, −0.14; P = 0.011) were independently associated with lower IOP. The observed associations between statin or aspirin use with IOP were no longer significant after adjustment for β-blocker use. Conclusions This is the first population-based study to demonstrate and quantify clinically significant differences in IOP among participants using systemic β-blockers or
OBJECTIVE--To examine the requirements and opportunities for obtaining a doctor of medicine or master of surgery degree from a university in the United Kingdom other than the graduate's own, particularly in the case of foreign graduates. DESIGN--Review of regulations governing the award of doctor of medicine and master of surgery degrees in British universities. SETTING--All 19 universities in the United Kingdom offering clinical courses. MAIN OUTCOME MEASURE--Availability of degrees to gradu...
Angela Lúcia de Araújo Ferreira
Full Text Available The natural environment and the geographical circumstances set the basis for the development of an hygiene-oriented thinking and led physicians to investigate and diagnose the regional and urban space between the eighteenth and twentieth centuries. These ideas were systematically compiled in works known as Medical Geography and Topography Works which, when known throughout the world, ended up becoming precise descriptions of the cities' territory, providing a spatial account of diseases and identifying their nature, evolution and treatment. Besides recovering the origin of these treaties and stressing their importance as amongst the first "geographical" investigations of urban space, this work aims to include Brazil, and specifically the city of Natal (in northeast Brazil within the context of these analyses, with special emphasis on the work entitled Topography of Natal and its Medical Geography authored by doctor Januário Cicco in 1920.
Furnham, Adrian; Raja, Nazia; Khan, Umar Ali
This study aimed to compare British, British Pakistani and Native Pakistani (from Pakistan) medical students' beliefs about the manifestation, causes and cures of schizophrenia, prior to any psychiatric training. A total of 305 participants completed a questionnaire on general beliefs about people with schizophrenia, causal explanations concerning the aetiology of schizophrenia and the role of hospitals and society in treating people with schizophrenia. It was predicted that compared with the British and British Pakistanis, the Pakistanis would have more negative beliefs and attitudes, considering people with schizophrenia to be more dangerous and unpredictable; they were also expected to use more superstitious beliefs to explain the cause of schizophrenia and its symptoms; as well as believe more in seeking help from God and faith healers. There was strong evidence to suggest that Pakistanis possessed more negative beliefs and attitudes about people with schizophrenia, but there was no evidence to indicate that Pakistanis believed more in superstitious causal explanations. Pakistanis were more likely to consider seeking help from faith healers, but not God, compared with British Pakistanis and the British. Results confirm previous European-Asian difference in the understanding of the cause, manifestation and cure of schizophrenia. The impact of traditional and Western cultural influences on British Pakistanis is considered.
Davies, M J
The notion of "region" can be a valuable analytical tool in the writing of Canadian medical history. This article explores themes in the history of British Columbia that link medicine and regional development. Employing a historiographical sweep from the colonial period to the 1970s, the author considers doctors and imperialism, medical practice and the economy, and the relationship between metropolis and periphery in shaping medical institutions and medical culture in the western province. The intent of the piece is to stimulate thought about the potential of introducing the sense of place into regional medical history in Canada.
Nunes, Everardo Duarte
Margot Jefferys (1916-1999) was not only the person who introduced medical sociology into Great Britain, but also the researcher and professor who, during thirty years, exerted the most deep influence on the teaching of health social sciences either in undergraduate or especially graduate studies, since the beginning of her career, in 1953, at the London School of Hygiene and Tropical Medicine. In addition to create a global panorama concerning the Jefferys' works, this study highlights two texts, which are situated into the field we are researching: the history of health sociology. The first one, published in 1991, discusses the relationships between epidemiology and sociology; and the second, published in 1996, discusses the field of medical sociology. Both texts are a series of considerations regarding the Jefferys' thought and the more recent questions of the field in Great Britain.
De Barros, Juanita
This paper examines the ambiguous place of medical assistants-dispensers-in a post-slavery British Caribbean colony, British Guiana, from the end of slavery in the 1830s to the early twentieth century. Although the latter were crucial to the functioning of the colonial medical system, local physicians resented them, complaining about the economic threat they posed and at times condemning them as quacks. These attacks were part of a wider discussion about the composition of the medical profession and the role of medical auxiliaries in colonial society, and to an extent, they echoed debates conducted in other jurisdictions in this period. But in the British Caribbean, this discussion was significantly different. There, long-standing views about obeah-an Afro-Creole medico-religious practice-as a particularly dangerous and uncivilised type of quackery was part of the discursive context. That those participating in this debate included African-descended physicians whose arrival in the medical profession was recent and contested demonstrates the vexed and complex nature of professionalisation in a post-slavery society.
Khawaja, Anthony P; Chan, Michelle P Y; Broadway, David C; Garway-Heath, David F; Luben, Robert; Yip, Jennifer L Y; Hayat, Shabina; Wareham, Nicholas J; Khaw, Kay-Tee; Foster, Paul J
To determine the association between systemic medication use and intraocular pressure (IOP) in a population of older British men and women. Population-based, cross-sectional study. We included 7093 participants from the European Prospective Investigation into Cancer-Norfolk Eye Study. Exclusion criteria were a history of glaucoma therapy (medical, laser, or surgical), IOP asymmetry between eyes of >5 mmHg, and missing data for any covariables. The mean age of participants was 68 years (range, 48-92) and 56% were women. We measured IOP using the Ocular Response Analyzer. Three readings were taken per eye and the best signal value of the Goldmann-correlated IOP value considered. Participants were asked to bring all their medications and related documentation to the health examination, and these were recorded by the research nurse using an electronic case record form. The medication classes examined were angiotensin-converting enzyme inhibitors, angiotensin-receptor blockers, α-blockers, β-blockers, calcium channel blockers, diuretics, nitrates, statins, insulin, biguanides, sulfonylureas, aspirin, and other nonsteroidal anti-inflammatory drugs. We examined associations between medication use and IOP using multivariable linear regression models adjusted for age, sex, and body mass index. Models containing diabetic medication were further adjusted for glycosylated hemoglobin levels. Mean IOP of the right and left eyes. Use of systemic β-blockers (-0.92 mmHg; 95% CI, -1.19, -0.65; Pnitrates (-0.63 mmHg; 95% CI, -1.12, -0.14; P = 0.011) were independently associated with lower IOP. The observed associations between statin or aspirin use with IOP were no longer significant after adjustment for β-blocker use. This is the first population-based study to demonstrate and quantify clinically significant differences in IOP among participants using systemic β-blockers or nitrates. Lower IOP observed in participants using statins or aspirin was explained by concurrent
This history of the disease categories "yaws" and "syphilis" explores the interplay between European and African medical cultures in the early modern Atlantic world. The assertion made by both early modern and modern medical authorities, that yaws and syphilis are the same disease, prompts a case study of the history of disease that reflects on a variety of issues in the history of medicine: the use of ideas about contagion to demarcate racial and sexual difference at sites around the British Empire; the contrast between persistently holistic ideas about disease causation in the Black Atlantic and the growth of ontological theories of disease among Europeans and Euro-Americans; and the controversy over the African practice of yaws inoculation, which may once have been an effective treatment but was stamped out by plantation owners who viewed it as a waste of their enslaved laborers' valuable time.
Gosling, George Campbell
The arrival of the British National Health Service (NHS) in 1948 heralded significant changes for all health workers, but the establishment of a 'free' health service was especially meaningful for the hospital almoners-or medical social workers, as they were starting to be known-who had previously been responsible for the assessment and collection of patient payments. It was on this basis they had gained a foothold in the hospital, capitalising on gendered assumptions of financial understanding and behaviour. Yet what might have caused an identity crisis was embraced. This was a dual strategy of both repositioning the profession in alignment with the planned NHS and of asserting an enhanced professional status by distancing themselves from the handling of payment. It was an episode in the history of this distinctly female profession that speaks to women's historic relationship with money.
Acupuncture was first used in China, probable about 2000 years ago. When acupuncture first arrived in the West in the 17th century, the principles which the Chinese had used to explain its actions were at variance with current scientific knowledge of the body's structure and function. This led to the rejection of acupuncture by the medical profession in the UK, although individual practitioners adopted it with enthusiasm, usually needling the point of maximal tenderness to treat musculoskeletal pain. Acupuncture was more generally accepted in France and Germany, where the pioneering British physician Felix Mann encountered it in the 1950s. He then taught acupuncture to other medical practitioners and organised regular meetings in London, from which the British Medical Acupuncture Society, BMAS, emerged in 1980. The tradition of biannual scientific meetings has continued since then. The Society has many connections with prominent acupuncturists internationally and is a founder member of the International Council of Medical Acupuncture and Related Techniques (ICMART), and has hosted two world congresses. The Society was involved in standardisation of the meridian nomenclature published in 1990. The Society's scientific journal, Acupuncture in Medicine, was founded in 1981 and has gained international recognition, being indexed on several databases. The Society has established regular teaching courses at different levels, which lead to professional qualifications of Certificate and Diploma. The membership is now open to different health professionals, has grown steadily and now stands at nearly 2500. The Society is administered from offices in Cheshire and London. Many individual members have contributed to the Society's characteristic Western 'medical' approach to acupuncture in which needling is seen as a form of neuromuscular stimulation that owes little to traditional meridians or points. The Society has shown a particular interest in acupuncture for myofascial
After 1700, astrology lost the respect it once commanded in medical circles. But the belief that the heavens influenced bodily health persisted - even in learned medicine - until well into the nineteenth century. The continuing vitality of these ideas owed much to the new empirical and mechanical outlook of their proponents. Taking their cue from the work of Robert Boyle and Richard Mead, a number of British practitioners amassed statistical evidence which purported to prove the influence of the Moon upon fevers and other diseases. Such ideas flourished in the colonies and in the medical services of the armed forces, but their exponents were not marginal men. Some, like James Lind, were widely respected and drew support for their views from such influential figures as Erasmus Darwin.
National Oceanic and Atmospheric Administration, Department of Commerce — NGDC builds and distributes high-resolution, coastal digital elevation models (DEMs) that integrate ocean bathymetry and land topography to support NOAA's mission to...
Jones, Claire L
This article explores how medical practitioners read, used, and experienced medical trade catalogs in late-nineteenth- and early-twentieth-century Britain. Reader responses to the catalog, a book-like publication promoting medical tools, appliances, and pharmaceuticals, have been chronically understudied, as have professional reading practices within medicine more generally. Yet, evidence suggests that clinicians frequently used the catalog and did so in three main ways: to order medical products, to acquire new information about these products, and to display their own product endorsements and product designs. The seemingly widespread nature of these practices demonstrates an individual and collective professional desire to improve medical practice and highlights the importance of studying professional reading practices in the cultural history of medicine.
Keyes, Mira; Morris, William James; Spadinger, Ingrid; Araujo, Cynthia; Cheung, Arthur; Chng, Nick; Crook, Juanita; Halperin, Ross; Lapointe, Vince; Miller, Stacy; Pai, Howard; Pickles, Tom
To describe in detail British Columbia (BC) Cancer Agency (BCCA) Provincial Prostate Brachytherapy (PB) Quality Assurance (QA) Program. The BCCA PB Program was established in 1997. It operates as one system, unified and supported by electronic and information systems, making it a single PB treatment provider for province of BC and Yukon. To date, >4000 patients have received PB (450 implants in 2011), making it the largest program in Canada. The Program maintains a large provincial prospective electronic database with records on all patients, including disease characteristics, risk stratification, pathology, preplan and postimplant dosimetric data, follow-up of prostate-specific antigen, and toxicity outcomes. QA was an integral part of the program since its inception. A formal QA Program was established in 2002, with key components that include: unified eligibility criteria and planning system, comprehensive database, physics and oncologist training and mentorship programs, peer review process, individual performance outcomes and feedback process, structured continuing education and routine assessment of the program's dosimetry, toxicity and prostate-specific antigen outcomes, administration and program leadership that promotes a strong culture of patient safety. The emphasis on creating a robust, broad-based network of skilled providers has been achieved by the program's requirements for training, education, and the QA process. The formal QA process is considered a key factor for the success of cancer control outcomes achieved at BCCA. Although this QA model may not be wholly transferable to all PB programs, some of its key components may be applicable to other programs to ensure quality in PB and patient safety. Crown Copyright © 2013. Published by Elsevier Inc. All rights reserved.
Park, R J
'Playing Hurt/Playing Tough', a dominant ideology in today's football (soccer, rugby, American 'gridiron'), is by no means new. Many books, monographs, and articles have examined the historical development of these games, but the attention given to them in the medical press during the late 1800s/early 1900s has been overlooked. The Lancet, Journal of the American Medical Association, and other turn-of-the-century medical publications regularly included accounts and descriptions of injuries and deaths. More telling were the many editorials in which physicians in both Britain and the United States expressed enthusiasm while also lamenting the games' physical and morale effects upon players, asking whether 'football' should be mended or ended.
Under the direction of the Cinematography and Photography Standards Committee, a British Standard method has been prepared for determining ISO speed and average gradient of direct-exposure medical and dental radiographic film/film-process combinations. The method determines the speed and gradient, i.e. contrast, of the X-ray films processed according to their manufacturer's recommendations. (U.K.)
Ashton, C H; Kamali, F
Personality characteristics and lifestyle variables were assessed in two cohorts of second-year medical students at the University of Newcastle upon Tyne, UK as part of a psychopharmacology 'teach-in' in 1993 and 1994. The pooled sample included 186 students: 77 men, 109 women, mean age 20.4 +/- 1.8 years. Measures included the Eysenck Personality Questionnaire, the Hospital Anxiety Depression Scale, and a questionnaire concerning consumption of alcohol, tobacco, cannabis and other illicit drugs, and physical exercise. The results were compared, where possible, with a similar survey in Newcastle upon Tyne medical students in 1983 and 1984. Personality variables, prevalence of cigarette smoking, levels of caffeine consumption and participation in sports had not changed significantly over the decade. There appeared to be a modest overall increase in alcohol consumption and in the 1993 and 1994 cohorts of students, 25.5% of those who drank alcohol exceeded recommended low risk levels (comparable data not available for 1983 and 1984). Reported use of cannabis and other illicit drugs had more than doubled, and in the present survey 49.2% of students recorded using cannabis and 22% had tried other illicit drugs. Corresponding figures for 1983 and 1984 were 20.9% for cannabis and 3.3% for other illicit drugs. Anxiety levels were not measured in 1983 and 1984 but in the present survey 39.3% of the students had anxiety ratings within the clinically significant range. The high levels of alcohol consumption and illicit drug use, and the high anxiety ratings, in this sample of medical students are a cause for concern.(ABSTRACT TRUNCATED AT 250 WORDS)
Yasmin, Ephia; Balachandren, Neerujah; Davies, Melanie C; Jones, Georgina L; Lane, Sheila; Mathur, Raj; Webber, Lisa; Anderson, Richard A
Fertility preservation in the female poses several challenges due to the invasive nature of the techniques available to achieve it. The guideline aims to bring together the evidence available for the measures for fertility preservation and their outcome. The guideline addresses fertility preservation for medical reasons and includes both oncological and non-oncological causes. The techniques that the guideline considers are: (i) embryo and oocyte cryopreservation; (ii) ovarian tissue cryopreservation; (iii) GnRH agonist suppression and (iv) ovarian transposition. Although ovarian tissue cryopreservation is still considered experimental, the availability of this technique is gaining momentum as more live births from auto-transplanted tissue are reported. The guideline also highlights use of current treatment modalities for benign and malignant conditions that have a better fertility sparing profile. The guideline recommends a multidisciplinary approach in counselling women and girls about the risk to their fertility and available techniques. The role of psychological support in assisting women and girls with decision-making is highlighted. The guideline also highlights the risks associated with these techniques. Women need to be medically fit to undergo invasive procedures. Fertility preservation techniques are appropriate when treatment has curative intent. Fertility preservation is a subject of on-going research on outcomes of different techniques and at the time of publication, studies are still likely to emerge adding to the available literature.
Rodrigues, M.; Botelho, M.M.; Fonseca, A.T.; Peter, J.P.; Pimentel, T.; Vieira, M.R.
For successful surgery for drug-resistant partial epilepsy the site of the seizure focus needs to be known exactly. The purpose of this study was to compare the evaluation of the regional cerebral blood flow (rCBF) (localization and degree of disturbances) by 99m Tc-hexamethylpropylene-amineoxime (HMPAO) single photon emission computed tomography (SPECT) with computerized electroencephalographic topography (CET) and transmission computed X-ray tomography (CT) in partial epilepsy. The study included 20 patients with medically refractory complex partial seizures. Of the 20 patients included, 15 were studied interictally, four ictally and one in both states, interictally and ictally. 99m Tc-HMPAO SPECT detected rCBF changes in 95% of the patients. Interictal studies demonstrated focal areas of hypoperfusion in 93% of the patients. Ictal studies demonstrated an area of hyperperfusion in all patients. Blood flow disturbances in deeper structures of the brain, such as basal ganglia, could be detected. The areas with abnormal 99m Tc-HMPAO uptake were concordant, in localization, with CET in 85% of the patients. Abnormal data with CT scans were found in only 45% of the patients. Focal lesions were found in 20% of the patients by CT scans. 99m Tc-HMPAO SPECT combined with CET may be a useful screening procedure prior to referral for invasive diagnostic procedures in future management of patients with medically refractory complex partial seizures. (author)
Please note that from 01/01/2009, the passport section of the British Consulate will move from Geneva to Paris. This change is part of a global initiative to rationalize passport services and reduce administrative costs while ensuring that the quality of the service remains high. The aim is to issue new passports within 10 working days of receiving applications (excluding transit time). From 1st January 2009 passport applications should be sent by courier or registered post directly to: British Consulate General BP111-08 75363 Paris CEDEX 08 France For further information please refer to: http://ukinswitzerland.fco.gov.uk/en/passports/passport-move/
Flow around steep topography T. M. Shaun Johnston Scripps Institution of Oceanography University of California, San Diego 9500 Gilman Drive, M...tall, steep, submarine topography and islands. During the Flow Encountering Abrupt Topography (FLEAT) DRI, investigators will determine: • Whether...estimates from making accurate statistical/deterministic predictions at km resolution around submarine topography and islands? How can we
Mülhaupt, Michael; Dietzko, Sven; Wolffsohn, James; Bandlitz, Stefan
To investigate the agreement between the central corneal radii and corneal eccentricity measurements generated by the new Wave Analyzer 700 Medica (WAV) compared to the Keratograph 4 (KER) and to test the repeatability of the instruments. 20 subjects (10 male, mean age 29.1 years, range 21-50 years) were recruited from the students and staff of the Cologne School of Optometry. Central corneal radii for the flat (r c/fl ) and steep (r c/st ) meridian as well as corneal eccentricity for the nasal (e nas ), temporal (e temp ), inferior (e inf ) and superior (e sup ) directions were measured using WAV and KER by one examiner in a randomized order. Central radii of the flat (r c/fl ) and steep (r c/st ) meridian measured with both instruments were statically significantly correlated (r = 0.945 and r = 0.951; p 0.05). Limits of agreement (LoA) indicate a better repeatability for the KER compared to WAV. Corneal topography measurements captured with the WAV were strongly correlated with the KER. However, due to the differences in measured corneal radii and eccentricities, the devices cannot be used interchangeably. For corneal topography the KER demonstrated better repeatability. Copyright © 2018 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.
Bernthal, Elizabeth M; Draper, H J A; Henning, J; Kelly, J C
To identify and explore features of ethical issues that senior clinicians faced as deployed medical directors (DMDs) to the British Field Hospital in Afghanistan as well as to determine the ethical training requirements for future deployments. A qualitative study in two phases conducted from November 2014 to June 2015. Phase 1 analysed 60 vignettes of cases that had generated ethical dilemmas for DMDs. Phase 2 included focus groups and an interview with 13 DMDs. Phase 1 identified working with limited resources, dual conflict of meeting both clinical and military obligations and consent of children as the most prevalent ethical challenges. Themes found in Phase 2 included sharing clinical responsibilities with clinicians from other countries and not knowing team members' ways of working, in addition to the themes from Phase 1. This study has drawn together examples of scenarios to form a repository that will aid future training. Recommendations included undertaking ethics training together as a team before, during and after deployment which must include all nationalities who are assigned to the same operational tour, so that different ethical views can be explored beforehand. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.
Dynamic Topography Revisited Dynamic topography is usually considered to be one of the trinity of contributing causes to the Earth's non-hydrostatic topography along with the long-term elastic strength of the lithosphere and isostatic responses to density anomalies within the lithosphere. Dynamic topography, thought of this way, is what is left over when other sources of support have been eliminated. An alternate and explicit definition of dynamic topography is that deflection of the surface which is attributable to creeping viscous flow. The problem with the first definition of dynamic topography is 1) that the lithosphere is almost certainly a visco-elastic / brittle layer with no absolute boundary between flowing and static regions, and 2) the lithosphere is, a thermal / compositional boundary layer in which some buoyancy is attributable to immutable, intrinsic density variations and some is due to thermal anomalies which are coupled to the flow. In each case, it is difficult to draw a sharp line between each contribution to the overall topography. The second definition of dynamic topography does seem cleaner / more precise but it suffers from the problem that it is not measurable in practice. On the other hand, this approach has resulted in a rich literature concerning the analysis of large scale geoid and topography and the relation to buoyancy and mechanical properties of the Earth [e.g. refs 1,2,3] In convection models with viscous, elastic, brittle rheology and compositional buoyancy, however, it is possible to examine how the surface topography (and geoid) are supported and how different ways of interpreting the "observable" fields introduce different biases. This is what we will do. References (a.k.a. homework)  Hager, B. H., R. W. Clayton, M. A. Richards, R. P. Comer, and A. M. Dziewonski (1985), Lower mantle heterogeneity, dynamic topography and the geoid, Nature, 313(6003), 541-545, doi:10.1038/313541a0.  Parsons, B., and S. Daly (1983), The
Day, Linda; Sutton-Spence, Rachel
Research presented here describes the sign names and the customs of name allocation within the British Deaf community. While some aspects of British Sign Language sign names and British Deaf naming customs differ from those in most Western societies, there are many similarities. There are also similarities with other societies outside the more…
Chikawa, Jun-Ichi; Kuriyama, Masao
The uniqueness of synchrotron X-ray topography does not lie in new theoretical or experimental notions about the topographic method, but in the characteristics of this new source as a critical optical element. At most synchrotron facilities, the spectrum ranging from 5 keV (2.5A) to 30 keV (0.4A0 can be made available for topography. A synchrotron-radiation source gives tunability (choice of wavelengths) and pulsed time structure with highly collimated an intense photon beams. The continuous spectrum and excellent collimation have made white-beam X-ray topography a practical reality. The high intensity of the synchrotron X-ray source, even after beam monochromatization and further collimation, permits time-dependent observation of kinetics. By selecting the mono-chromatized wavelength close to an absorption edge of an element in the sample crystal, the topographic data selectively emphasize or de-emphasize structures related to that element. For full use of such properties of synchrotron radiation, however, development of new optical systems and imaging detectors is required, and is in progress at most synchrotron facilities. This chapter covers a brief review of X-ray topography, its basic principles, and the necessary X-ray optical and imaging systems. The capability of synchrotron-radiation topography is demonstrated with some recent results. (author). 118 refs.; 22 figs
Adair, C.; Burt, Ramsay, 1953-
British Dance: Black Routes re-examines the distinctive contributions made to British dance by dancers who are Black. Covering the period 1946 to the present, it presents a radical re-reading of dancers and their companies, placing their achievements within a broader historical, cultural and artistic context. The result of a two year research project, British Dance and the African Diaspora, led by editors Christy Adair and Ramsay Burt, the collection looks at artists working with contempor...
The objective of the Dawn topography investigation is to derive the detailed shapes of 4 Vesta and 1 Ceres in order to create orthorectified image mosaics for geologic interpretation, as well as to study the asteroids' landforms, interior structure, and the processes that have modified their surfaces over geologic time. In this paper we describe our approaches for producing shape models, plans for acquiring the needed image data for Vesta, and the results of a numerical simulation of the Vesta mapping campaign that quantify the expected accuracy of our results. Multi-angle images obtained by Dawn's framing camera will be used to create topographic models with 100 m/pixel horizontal resolution and 10 m height accuracy at Vesta, and 200 m/pixel horizontal resolution and 20 m height accuracy at Ceres. Two different techniques, stereophotogrammetry and stereophotoclinometry, are employed to model the shape; these models will be merged with the asteroidal gravity fields obtained by Dawn to produce geodetically controlled topographic models for each body. The resulting digital topography models, together with the gravity data, will reveal the tectonic, volcanic and impact history of Vesta, and enable co-registration of data sets to determine Vesta's geologic history. At Ceres, the topography will likely reveal much about processes of surface modification as well as the internal structure and evolution of this dwarf planet.
Full Text Available The 1970 British Cohort Study (BCS70 is one of Britain’s world famous national longitudinal birth cohort studies, three of which are run by the Centre for Longitudinal Studies at the Institute of Education, University of London. BCS70 follows the lives of more than 17,000 people born in England, Scotland and Wales in a single week of 1970. Over the course of cohort members lives, the BCS70 has collected information on health, physical, educational and social development, and economic circumstances among other factors. Since the birth survey in 1970, there have been nine ‘sweeps’ of all cohort members at ages 5, 10, 16, 26, 30, 34, 38 and most recently at 42. Data has been collected from a number of different sources (the midwife present at birth, parents of the cohort members, head and class teachers, school health service personnel and the cohort members themselves. The data has been collected in a variety of ways including via paper and electronic questionnaires, clinical records, medical examinations, physical measurements, tests of ability, educational assessments and diaries. The majority of BCS70 survey data can be accessed by bona fide researchers through the UK Data Service at the University of Essex.
Rigbye, Jane; Griffiths, Mark D.
According to the latest British Gambling Prevalence Survey, there are approximately 300,000 adult problem gamblers in Great Britain. In January 2007, the "British Medical Association" published a report recommending that those experiencing gambling problems should receive treatment via the National Health Service (NHS). This study…
Heijst, van G.J.F.; Kamp, L.P.J.; Theunissen, R.; Rodi, W.; Uhlmann, M.
This paper discusses laboratory experiments and numerical simulations of dipolar vortex flows in a shallow fluid layer with bottom topography. Two cases are considered: a step topography and a linearly sloping bottom. It is found that viscous effects – i.e., no-slip conditions at the non-horizontal
Roman, Leslie G.; Brown, Sheena; Noble, Steven; Wainer, Rafael; Young, Alannah Earl
This article asks: How have disability, indigenous arts and cultural praxis transformed and challenged the historical sociological archival research into relationships among asylum-making, medicalized colonialism and eugenics in the Woodlands School, formerly the Victoria Lunatic Asylum, the Provincial Asylum for the Insane in Victoria, BC 1859-72…
Abstracts to be Delivered at the 2014 Annual Conference of the Association of Medical Microbiology and Infectious Disease Canada, April 3 to 5, Victoria, British Columbia, Alphabetized According to the Surname of the First Author. Full-text Abstracts Can be Accessed at www.pulsus.com
Full Text Available This document presents the titles of the abstracts to be presented at the 2014 Annual Conference of the Association of Medical Microbiology and Infectious Disease Canada (April 3 to 5, Victoria, British Columbia. The full-text abstracts are available online.
Kim, Jae Seung [Asan Medical Center, University of Ulsan College of Medicine, Seoul (Korea, Republic of)
Parkinson's disease is one of the most frequent neurodegenerative diseases, which mainly affects the elderly. Parkinson's disease is often difficult to differentiate from atypical parkinson disorder such as progressive supranuclear palsy, multiple system atrophy, dementia with Lewy body, and corticobasal ganglionic degeneration, based on the clinical findings because of the similarity of phenotypes and lack of diagnostic markers. The accurate diagnosis of Parkinson's disease and atypical Parkinson disorders is not only important for deciding on treatment regimens and providing prognosis, but also it is critical for studies designed to investigate etiology and pathogenesis of parkinsonism and to develop new therapeutic strategies. Although degeneration of the nigrostriatal dopamine system results in marked loss of striatal dopamine content in most of the diseases causing parkinsonism, pathologic studies revealed different topographies of the neuronal cell loss in Parkinsonism. Since the regional cerebral glucose metabolism is a marker of integrated local synaptic activity and as such is sensitive to both direct neuronal/synaptic damage and secondary functional disruption at synapses distant from the primary site of pathology, and assessment of the regional cerebral glucose metabolism with F-18 FDG PET is useful in the differential diagnosis of parkinsonism and evaluating the pathophysiology of Parkinsonism.
Kim, Jae Seung
Parkinson's disease is one of the most frequent neurodegenerative diseases, which mainly affects the elderly. Parkinson's disease is often difficult to differentiate from atypical parkinson disorder such as progressive supranuclear palsy, multiple system atrophy, dementia with Lewy body, and corticobasal ganglionic degeneration, based on the clinical findings because of the similarity of phenotypes and lack of diagnostic markers. The accurate diagnosis of Parkinson's disease and atypical Parkinson disorders is not only important for deciding on treatment regimens and providing prognosis, but also it is critical for studies designed to investigate etiology and pathogenesis of parkinsonism and to develop new therapeutic strategies. Although degeneration of the nigrostriatal dopamine system results in marked loss of striatal dopamine content in most of the diseases causing parkinsonism, pathologic studies revealed different topographies of the neuronal cell loss in Parkinsonism. Since the regional cerebral glucose metabolism is a marker of integrated local synaptic activity and as such is sensitive to both direct neuronal/synaptic damage and secondary functional disruption at synapses distant from the primary site of pathology, and assessment of the regional cerebral glucose metabolism with F-18 FDG PET is useful in the differential diagnosis of parkinsonism and evaluating the pathophysiology of Parkinsonism
Criminologists display a largely unexamined propensity to ignore writings that are more than fifteen or so years old, with evident consequences for the public presentation and validation of expert knowledge. A citation study was combined with detailed observations from British criminologists to ascertain quite how that disavowal of the past was accomplished.
Stannard, Adam; Tai, Nigel R; Bowley, Douglas M; Midwinter, Mark; Hodgetts, Tim J
Key performance indicators (KPI) are tools for assessing process and outcome in systems of health care provision and are an essential component in performance improvement. Although KPI have been used in British military trauma for 10 years, they remain poorly defined and are derived from civilian metrics that do not adjust for the realities of field trauma care. Our aim was to modify current trauma KPI to ensure they more faithfully reflect both the military setting and contemporary evidence in order to both aid accurate calibration of the performance of the British Defence Medical Services and act as a driver for performance improvement. A workshop was convened that was attended by senior, experienced doctors and nurses from all disciplines of trauma care in the British military. "Speciality-specific" KPI were developed by interest groups using evidence-based data where available and collective experience where this was lacking. In a final discussion these were streamlined into 60 KPI covering each phase of trauma management. The introduction of these KPI sets a number of important benchmarks by which British military trauma can be measured. As part of a performance improvement programme, these will allow closer monitoring of our performance and assist efforts to develop, train, and resource British military trauma providers.
UK national audit against the key performance indicators in the British Association for Sexual Health and HIV Medical Foundation for AIDS and Sexual Health Sexually Transmitted Infections Management Standards.
McClean, H; Sullivan, A K; Carne, C A; Warwick, Z; Menon-Johansson, A; Clutterbuck, D
A national audit of practice performance against the key performance indicators in the British Association for Sexual Health and HIV (BASHH) and HIV Medical Foundation for AIDS Sexual Health Standards for the Management of Sexually Transmitted Infections (STIs) was conducted in 2011. Approximately 60% and 8% of level 3 and level 2 services, respectively, participated. Excluding partner notification performance, the five lowest areas of performance for level 3 clinics were the STI/HIV risk assessment, care pathways linking care in level 2 clinics to local level 3 services, HIV test offer to patients with concern about STIs, information governance and receipt of chlamydial test results by clinicians within seven working days (the worst area of performance). The five lowest areas of performance for level 2 clinics were participating in audit, having an audit plan for the management of STIs for 2009-2010, the STI/HIV risk assessment, HIV test offer to patients with concern about STIs and information governance. The results are discussed with regard to the importance of adoption of the standards by commissioners of services because of their relevance to other national quality assurance drivers, and the need for development of a national system of STI management quality assurance measurement and reporting.
Chlamydial partner notification in the British Association for Sexual Health and HIV (BASHH) 2011 UK national audit against the BASHH Medical Foundation for AIDS and Sexual Health Sexually Transmitted Infections Management Standards.
McClean, H; Carne, C A; Sullivan, A K; Radcliffe, K W; Ahmed-Jushuf, I
This paper reports on chlamydial partner notification (PN) performance in the 2011 BASHH national audit against the British Association for Sexual Health and HIV (BASHH) Medical Foundation for AIDS Sexual Health (MedFASH) Sexually Transmitted Infection Management Standards (STIMS). There was wide regional variation in level 3 clinic PN performance against the current standard of index case-reported chlamydial PN, with 43% (regional range 0-80%) of clinics outside London meeting the ≥0.6 contacts seen per index standard, and 85% of clinics (regional range 82-88%) in London meeting the ≥0.4 standard. For level 2 clinics, 39% (regional range 0-100%) of clinics outside London met the ≥0.6 standard, and 43% (regional range 40-50%) of clinics in London met the ≥0.4 standard. Performance for health-care worker (HCW)-verified contact attendance is also reported. New standards for each of these performance measures are proposed for all level 3 clinics: ≥0.6 contacts seen per index case based on index case report, and ≥0.4 contacts seen per index case based on HCW verification, both within four weeks of the first partner notification interview. The results are discussed with regard to the importance of adoption of standards by commissioners of services, relevance to national quality agendas, and the need for development of a national system of PN quality assurance measurement and reporting.
Simultaneous validation of the Grandway MD2301 digital automatic blood pressure monitor by the British Hypertension Society and the Association for the Advancement of Medical Instrumentation/the International Organization for Standardization protocols.
Huang, Jinhua; Wang, Yun; Liu, Zhaoying; Wang, Yuling
The aim of this study was to determine the accuracy of the Grandway MD2301 digital automatic blood pressure monitor by the British Hypertension Society (BHS) and the Association for the Advancement of Medical Instrumentation (AAMI)/the International Organization for Standardization (ISO) protocols. A total of 85 participants were included for evaluation based on the requirements of the BHS and the AAMI/ISO protocols. The validation procedure and data analysis followed the protocols precisely. The device achieved A/A grading for the BHS protocol and maintained A/A grading throughout the low, medium and high blood pressure ranges. The device also fulfilled the requirement of the AAMI/ISO protocol with device-observer differences of -0.9±5.6 and 0.8±5.2 mmHg for systolic and diastolic blood pressure, respectively, for criterion 1, and -0.9±4.7 and 0.8±4.2 mmHg, respectively, for criterion 2. The Grandway MD2301 digital automatic blood pressure monitor achieved A/A grade of the BHS protocol and passed the requirements of the AAMI/ISO protocol in adults.
Frances Edmonds is one of a group of artists selected for the show ‘Territories’ taking place at Galerie Windkracht 13 in Den Helder, Holland this July 2012. This exhibition is curated by Sharon Beavan and Gethin Evans. The artists represented work across the boundaries of two and three-dimensional and time based form. The brief – to interrogate and explore the notion of territories. Frances will be showing several paintings from the British Museum series, based on imagery collected ...
Simultaneous validation of the SunTech CT40 automated blood pressure measurement device by the 1993 British Hypertension Society protocol and the Association for the Advancement of Medical Instrumentation/International Organization for Standardization 81060-2: 2013 standard.
Polo Friz, Hernan; Punzi, Veronica; Petri, Francesco; Orlandi, Riccardo; Maggiolini, Daniele; Polo Friz, Melisa; Primitz, Laura; Vighi, Giuseppe
This study aimed to perform a simultaneous, third-party, independent validation of the oscillometric SunTech CT40 device for blood pressure (BP) measurement, according to the 1993 protocol of the British Hypertension Society and the standard of the Association for the Advancement of Medical Instrumentation (AAMI)/the International Organization for Standardization (ISO) 81060-2:2013. Patient recruitment, study procedures, and data analysis followed the recommendations stated by the protocols. The study was approved by the institutional review board. A total of 94 participants were included, 52 (55.3%) women, mean±SD age: 63.1±18.0 years, mean±SD arm circumference: 35.0±9.0 cm. The average of observers' entry BPs was 146.9±37.2 mmHg for systolic blood pressure (SBP) and 82.2±22.1 mmHg for diastolic blood pressure (DBP). Differences between the standard measurement and the test device within 5, 10, and 15 mmHg, for the better observer, were 79.4, 96.5, and 100.0% for SBP and 82.6, 97.5, and 100.0% for DBP, respectively. The mean±SD differences between the readings obtained using the test device and those obtained by the observers (AAMI/ISO 81060-2:2013 standard criterion 1) were 0.3±5.0 mmHg (SBP) and -0.8±4.3 mmHg (DBP), and the mean±SD differences between average of reference readings and average of test device readings in each patient (criterion 2) were 0.3±3.9 and -0.8±3.5 mmHg for SBP and DBP, respectively. The CT40 BP device achieved A/A grade of the British Hypertension Society protocol and fulfilled the requirements (criteria 1 and 2) of the AAMI/ISO standard. CT40 can be recommended for BP measurement in adults.
Bandlitz, Stefan; Bäumer, Joachim; Conrad, Uwe; Wolffsohn, James
A detailed evaluation of the corneo-scleral-profile (CSP) is of particular relevance in soft and scleral lenses fitting. The aim of this study was to use optical coherence tomography (OCT) to analyse the profile of the limbal sclera and to evaluate the relationship between central corneal radii, corneal eccentricity and scleral radii. Using OCT (Optos OCT/SLO; Dunfermline, Scotland, UK) the limbal scleral radii (SR) of 30 subjects (11M, 19F; mean age 23.8±2.0SD years) were measured in eight meridians 45° apart. Central corneal radii (CR) and corneal eccentricity (CE) were evaluated using the Oculus Keratograph 4 (Oculus, Wetzlar, Germany). Differences between SR in the meridians and the associations between SR and corneal topography were assessed. Median SR measured along 45° (58.0; interquartile range, 46.8-84.8mm) was significantly (ptopography and may provide additional data useful in fitting soft and scleral contact lenses. Copyright © 2017 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.
Li, Qiang; Wei, Xiaohua; Yang, Xin; Giles-Hansen, Krysta; Zhang, Mingfang; Liu, Wenfei
Watershed topography plays an important role in determining the spatial heterogeneity of ecological, geomorphological, and hydrological processes. Few studies have quantified the role of topography in various flow variables. In this study, 28 watersheds with snow-dominated hydrological regimes were selected with daily flow records from 1989 to 1996. These watersheds are located in the Southern Interior of British Columbia, Canada, and range in size from 2.6 to 1780 km2. For each watershed, 22 topographic indices (TIs) were derived, including those commonly used in hydrology and other environmental fields. Flow variables include annual mean flow (Qmean), Q10 %, Q25 %, Q50 %, Q75 %, Q90 %, and annual minimum flow (Qmin), where Qx % is defined as the daily flow that occurred each year at a given percentage (x). Factor analysis (FA) was first adopted to exclude some redundant or repetitive TIs. Then, multiple linear regression models were employed to quantify the relative contributions of TIs to each flow variable in each year. Our results show that topography plays a more important role in low flows (flow magnitudes ≤ Q75 %) than high flows. However, the effects of TIs on different flow magnitudes are not consistent. Our analysis also determined five significant TIs: perimeter, slope length factor, surface area, openness, and terrain characterization index. These can be used to compare watersheds when low flow assessments are conducted, specifically in snow-dominated regions with the watershed size less than several thousand square kilometres.
Rosen, B-G; Blunt, L; Thomas, T R
Human skin metrology is an area of growing interest for many disciplines both in research and for commercial purposes. Changes in the skin topography are an early stage diagnosis tool not only for diseases but also give indication of the response to medical and cosmetic treatment. This paper focuses on the evaluation of in vivo and in vitro methodologies for accurate measurements of skin and outlines the quantitative characterisation of the skin topography. The study shows the applicability of in-vivo skin topography characterisation and also the advantages and limitations compared to conventional replication techniques. Finally, aspects of stripe projection methodology and 3D characterisation are discussed as a background to the proposed methodology in this paper
McClure, Erin A; Saladin, Michael E; Baker, Nathaniel L; Carpenter, Matthew J; Gray, Kevin M
Preliminary evidence, within both adults and adolescents, suggests that the intensity with which cigarettes are smoked (i.e., smoking topography) is predictive of success during a cessation attempt. These reports have also shown topography to be superior compared to other variables, such as cigarettes per day, in the prediction of abstinence. The possibility that gender may influence this predictive relationship has not been evaluated but may be clinically useful in tailoring gender-specific interventions. Within the context of a clinical trial for smoking cessation among women, adult daily smokers completed a laboratory session that included a 1-hour ad libitum smoking period in which measures of topography were collected (N=135). Participants were then randomized to active medication (nicotine patch vs. varenicline) and abstinence was monitored for 4weeks. Among all smoking topography measures and all abstinence outcomes, a moderate association was found between longer puff duration and greater puff volume and continued smoking during the active 4-week treatment phase, but only within the nicotine patch group. Based on the weak topography-abstinence relationship among female smokers found in the current study, future studies should focus on explicit gender comparisons to examine if these associations are specific to or more robust in male smokers. © 2013 Elsevier Ltd. All rights reserved.
Full Text Available The video-recordings presented here were made at the conference Photography and Britishness, held at the Yale Center for British Art on November 4 – 5, 2016. The conference was the result of a collaboration between the Yale Center for British Art, New Haven, the Paul Mellon Centre for Studies in British Art, London, and the Huntington Library, Art Collections, and Botanical Gardens in San Marino—three research institutions that have a converging interest in British art. The conference sought to investigate the various ways in which notions of “Britishness” have been communicated, inflected, and contested through the photographic image. It was not a conference about the history of photography in Britain, or about British photography. Rather, it sought to consider the nature of the relationship between photography and Britishness: the notion that photography can capture images of Britishness, at the same time that our sense of what Britishness constitutes is produced by the photographic image. A key question for the conference was whether Britishness can have a photographic referent—or whether it is itself an effect of representation. Speakers at the conference approached these questions from a wide range of perspectives and focusing on a diverse number of photographic materials—from family albums and studio portraits to advertisements, reportage, and aerial photography—which demonstrated the complexities and instabilities not only of the term Britishness, but also of the medium of photography. The conference was opened with an introduction by John Tagg. The videos included here are presented in the order they were delivered.
The privatisation of the British electricity industry was intended to be the most radical change made to a European power system in the post-war period. It was of an experimental nature, imposing on electricity a way of operating which has no equivalent anywhere in the world. This report shows, however, that in the long run-up to privatisation, a number of factors combined to pull the plan far from its original aims and to produce a hybrid system which has caused many new difficulties without establishing a fully commercial market. The original ideas behind the new system - most notably the establishment of a fully competitive commercial system - have not been fulfilled. Many of them were wholly impractical. The problems of establishing a competitive market in electricity were never properly addressed until the planning for the new system was well under way. (author)
Arlø, Uffe Rolf; Hansen, Hans Nørgaard; Kjær, Erik Michael
The surface micro topography of injection moulded plastic parts can be important for aesthetical and technical reasons. The quality of replication of mould surface topography onto the plastic surface depends among other factors on the process conditions. A study of this relationship has been...... carried out with rough EDM (electrical discharge machining) mould surfaces, a PS grade, and by applying established three-dimensional topography parameters. Significant quantitative relationships between process parameters and topography parameters were established. It further appeared that replication...
Hoyle, D.; Cryer, B.; Bellotti, D.
This adjournment debate is about British Nuclear Fuels plc and the 750 redundancies due to take place by the mid-1990s at BNFL, Risley. The debate was instigated by the Member of Parliament for Warrington, the constituency in which BNFL, Risley is situated. Other members pointed out that other industries, such as the textile industry are also suffering job losses due to the recession. However the MP for Warrington argued that the recent restructuring of BNFL restricted the financial flexibility of BNFL so that the benefits of contracts won for THORP at Sellafield could not help BNFL, Risley. The debate became more generally about training, apprentices and employment opportunities. The Parliamentary Under-Secretary of State for Energy explained the position as he saw it and said BNFL may be able to offer more help to its apprentices. Long- term employment prospects at BNFL are dependent on the future of the nuclear industry in general. The debate lasted about half an hour and is reported verbatim. (U.K)
Two paradigms that are the source of present-day economic development policies are described. The dominant paradigm is the expansionist world view that assumes economic growth is essentially unlimited, subject to certain constraints, and that the best way to monitor the human economy is through money flows. The steady-state or ecological world view assumes there are real constraints on material throughput and growth, and puts a significant emphasis on natural capital as a form of wealth which is distinct from economic or manufactured capital. Over the long term, each generation must receive from the previous generation at least an adequate stock of natural capital assets to ensure long-term sustainability. For every major category of consumption, such as food and energy, an ecological footprint can be assigned which represents the land needed to sustain a given pattern of consumption. For the lower mainland of British Columbia, this footprint would be about 22 times the actual land area; for the Netherlands, it would be about 15 times larger than the country itself. On a global basis, only about 1.7 hectares per capita of ecologically productive land is actually available, showing that Canadian material standards would not be sustainable on a global level. The steady-state approach to economic development would involve a local and regional approach from the bottom up, preferring small-scale labor-intensive enterprise. Trade would be limited to trading in real ecological surpluses, and value-added products would be made locally instead of shipping raw materials for processing elsewhere. 5 figs
The 1982 Falklands War was shrouded in symbolism, bringing to the fore divergent conceptions of Britishness, kinship, and belonging. This article casts light on the persistent purchase of the idea of Greater Britain long after the end of empire, addressing a case that would normally be deemed...... outside its spatial and temporal boundaries. By highlighting the inherent contradictions of this transnational bond, the South Atlantic conflict had a profound effect on an underexposed British community with a lingering attachment to a “British world”: the Anglo-Argentines. As they found themselves...... wedged between two irreconcilable identities, divisions threatened to derail this already enfeebled grouping. Yet leaders of the community, presuming a common Britishness with the Falkland Islanders and Britons in the United Kingdom, sought to intervene in the conflict by reaching out to both...
Special photogrammetric techniques have been developed to portray Mars topography, using Mariner and Viking imaging and nonimaging topographic information and earth-based radar data. Topography is represented by the compilation of maps at three scales: global, intermediate, and very large scale. The global map is a synthesis of topographic information obtained from Mariner 9 and earth-based radar, compiled at a scale of 1:25,000,000 with a contour interval of 1 km; it gives a broad quantitative view of the planet. At intermediate scales, Viking Orbiter photographs of various resolutions are used to compile detailed contour maps of a broad spectrum of prominent geologic features; a contour interval as small as 20 m has been obtained from very high resolution orbital photography. Imagery from the Viking lander facsimile cameras permits construction of detailed, very large scale (1:10) topographic maps of the terrain surrounding the two landers; these maps have a contour interval of 1 cm. This paper presents several new detailed topographic maps of Mars.-Author
1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Multiscale Study of Currents Affected by Topography ...the effects of topography on the ocean general and regional circulation with a focus on the wide range of scales of interactions. The small-scale...details of the topography and the waves, eddies, drag, and turbulence it generates (at spatial scales ranging from meters to mesoscale) interact in the
Full Text Available Sub-ice shelf circulation and freezing/melting rates in ocean general circulation models depend critically on an accurate and consistent representation of cavity geometry. Existing global or pan-Antarctic topography data sets have turned out to contain various inconsistencies and inaccuracies. The goal of this work is to compile independent regional surveys and maps into a global data set. We use the S-2004 global 1-min bathymetry as the backbone and add an improved version of the BEDMAP topography (ALBMAP bedrock topography for an area that roughly coincides with the Antarctic continental shelf. The position of the merging line is individually chosen in different sectors in order to capture the best of both data sets. High-resolution gridded data for ice shelf topography and cavity geometry of the Amery, Fimbul, Filchner-Ronne, Larsen C and George VI Ice Shelves, and for Pine Island Glacier are carefully merged into the ambient ice and ocean topographies. Multibeam survey data for bathymetry in the former Larsen B cavity and the southeastern Bellingshausen Sea have been obtained from the data centers of Alfred Wegener Institute (AWI, British Antarctic Survey (BAS and Lamont-Doherty Earth Observatory (LDEO, gridded, and blended into the existing bathymetry map. The resulting global 1-min Refined Topography data set (RTopo-1 contains self-consistent maps for upper and lower ice surface heights, bedrock topography, and surface type (open ocean, grounded ice, floating ice, bare land surface. The data set is available in NetCDF format from the PANGAEA database at doi:10.1594/pangaea.741917.
Moving images of the British monarchy, in fact and fiction, are almost as old as the moving image itself, dating back to an 1895 American drama, The Execution of Mary Queen of Scots. British monarchs even appeared in the new ‘animated photography’ from 1896, led by Queen Victoria. Half a century later, the 1953 coronation of Elizabeth II was a milestone in the adoption of television, watched by 20 million Britons and 100 million North Americans. At the century’s end, Princess Diana’s funeral ...
In the final eleven months of its five-year term, the Coalition Government placed much emphasis in the education system on what it called fundamental British values (FBV). The phrase had its origins in counter-terrorism strategies that were of dubious validity both conceptually and operationally, and the trigger for its introduction into the…
Arlø, Uffe Rolf
Thermoplastic injection moulding is a widely used industrial process that involves surface generation by replication. The surface topography of injection moulded plastic parts can be important for aesthetical or technical reasons. With the emergence of microengineering and nanotechnology additional...... importance of surface topography follows. In general the replication is not perfect and the topography of the plastic part differs from the inverse topography of the mould cavity. It is desirable to be able to control the degree of replication perfection or replication quality. This requires an understanding...... of the physical mechanisms of replication. Such understanding can lead to improved process design and facilitate in-line process quality control with respect to surface properties. The purpose of the project is to identify critical factors that affect topography replication quality and to obtain an understanding...
The paper concerns the subject of nuclear power in British politics in 1986. The policies of the major political parties towards nuclear power are briefly outlined, along with public attitudes to nuclear energy, Chernobyl, and the rise of the anti-nuclear campaigners. (UK)
This PowerPoint presentation outlined the British Columbia Ministry of Energy and Mines' approach to the electricity market. A brief overview of the electric system in the province was provided, examining capacity (primarily hydro based) and the utility sector with its public ownership. In British Columbia, 80 per cent of the electricity is generated by British Columbia Hydro (BC Hydro). The rates are based on cost of service. British Columbia's market is western North America. A comparison of monthly bills for several large cities, both Canadian and American, was displayed. The market reviews conducted in 1995, 1998, and 2002 were reviewed and the major recommendations discussed. The author identified the opportunities in the province, discussing natural gas and coal for electricity production, resource potential, demand, and private sector capacity. The challenges facing the province are: cost effective development of resources to meet energy demand; aging infrastructure, high reliability requirements and economic growth; evolving electricity market structure in the United States; and, monopoly. The transmission system was reviewed with reference to trade with the Pacific Northwest, flexibility and storage. The energy plan objectives for the future were presented, including low rates and public ownership, secure and reliable supply, more private sector opportunities, and environmental responsibility. The alternative market structure includes regulated market characteristics, access to trade, and customer focus. figs
Soans, Hanno, 1974-
1990ndate kunsti muutumisest. Inglise kunstniku Peter Daviese maalist "Kuum esimene sada" (1996), Gavin Turki vahakujuna valminud autoportreest "Pop". "Young British Art'i" uuskunstist ja Jasper Zoova installatsioonist "F1". Eri analüüsivõimalusi pakkuvatest töödest (Marko Laimre & Ene-Liis Semperi 2000. a. novembri ühisnäituse osa töid).
Cornall, P; Howie, S; Mughal, A; Sumner, V; Dunstan, F; Kemp, A; Sibert, J
To quantify the risks of British children drowning abroad. The numbers of British children drowning abroad were estimated for 1996-2003 using the RoSPA/RLSS press cutting database. We compared these figures with the numbers of British children going abroad from the International Passenger Survey from the Office of National Statistics. Sixty-eight children (45 boys-23 Girls) drowned in the eight-year period: 48 (71%) in swimming pools (mostly in hotels). Allowing for exposure, the rate was higher in North America [5.2 (CI 2.9-9.4)/million tourists] than the European Union [1.9 (CI 1.4-2.5)/million tourists] p = 0.002. On average eight British children drown each year abroad. This is therefore a rare but tragic event. Most of these episodes happen in swimming pools and this needs to be compared to the one child that dies each year in municipal swimming pools in the United Kingdom where there is adequate lifeguarding. It may be that parents have a false sense of security for their children in pools abroad. We believe that there needs to be action from the European Union on this important event.
Seah, M. P.; De Chiffre, Leonardo
Surface physical analysis, i.e. topography characterisation, encompasses measurement, visualisation, and quantification. This is critical for both component form and for surface finish at macro-, micro- and nano-scales. The principal methods of surface topography measurement are stylus profilometry......, optical scanning techniques, and scanning probe microscopy (SPM). These methods, based on acquisition of topography data from point by point scans, give quantitative information of heights with respect to position. Based on a different approach, the so-called integral methods produce parameters...
Mapping Bedrock Topography using Electromagnetic Profiling. ... will be constructed The area under study is within the Abakaliki Shales Geologic Formation. ... micaceous sandstone; micaceous siltstone, sandy shales and shelly limestone.
Burmann, Fabian; Noir, Jerome; Jackson, Andrew
Both, seismological studies and geodynamic arguments suggest that there is significant topography at the core mantle boundary (CMB). This leads to the question whether the topography of the CMB could influence the flow in the Earth's outer core. As a preliminary experiment, we investigate the effects of bottom topography in the so-called Spin-Up, where motion of a contained fluid is created by a sudden increase of rotation rate. Experiments are performed in a cylindrical container mounted on a rotating table and quantitative results are obtained with particle image velocimetry. Several horizontal length scales of topography (λ) are investigated, ranging from cases where λ is much smaller then the lateral extend of the experiment (R) to cases where λ is a fraction of R. We find that there is an optimal λ that creates maximum dissipation of kinetic energy. Depending on the length scale of the topography, kinetic energy is either dissipated in the boundary layer or in the bulk of the fluid. Two different phases of fluid motion are present: a starting flow in the from of solid rotation (phase I), which is later replaced by meso scale vortices on the length scale of bottom topography (phase II).
Chang, Yow-Ren; Weeks, Eric R; Ducker, William A
We demonstrate that the surface motility of the bacterium, Pseudomonas aeruginosa, is hindered by a crystalline hemispherical topography with wavelength in the range of 2-8 μm. The motility was determined by the analysis of time-lapse microscopy images of cells in a flowing growth medium maintained at 37 °C. The net displacement of bacteria over 5 min is much lower on surfaces containing 2-8 μm hemispheres than on flat topography, but displacement on the 1 μm hemispheres is not lower. That is, there is a threshold between 1 and 2 μm for response to the topography. Cells on the 4 μm hemispheres were more likely to travel parallel to the local crystal axis than in other directions. Cells on the 8 μm topography were less likely to travel across the crowns of the hemispheres and were also more likely to make 30°-50° turns than on flat surfaces. These results show that surface topography can act as a significant barrier to surface motility and may therefore hinder surface exploration by bacteria. Because surface exploration can be a part of the process whereby bacteria form colonies and seek nutrients, these results help to elucidate the mechanism by which surface topography hinders biofilm formation.
Liao, K.; Becker, T. W.
The expression of mantle flow such as due to a buoyant plume as surface topography is a classical problem, yet the role of rheological complexities could benefit from further exploration. Here, we investigate the topographic expressions of mantle flow by means of numerical and analytical approaches. In numerical modeling, both conventional, free-slip and more realistic, stress-free boundary conditions are applied. For purely viscous rheology, a high viscosity lithosphere will lead to slight overestimates of topography for certain settings, which can be understood by effectively modified boundary conditions. Under stress-free conditions, numerical and analytical results show that the magnitude of dynamic topography decreases with increasing lithosphere thickness (L) and viscosity (ηL), as L-1 and ηL-3. The wavelength of dynamic topography increases linearly with L and (ηL/ ηM) 1/3. We also explore the time-dependent interactions of a rising plume with the lithosphere. For a layered lithosphere with a decoupling weak lower crust embedded between stronger upper crust and lithospheric mantle, dynamic topography increases with a thinner and weaker lower crust. The dynamic topography saturates when the decoupling viscosity is 3-4 orders lower than the viscosity of upper crust and lithospheric mantle. We further explore the role of visco-elastic and visco-elasto-plastic rheologies.
Shi, Qiwei; Roux, Stéphane; Latourte, Félix; Hild, François; Loisnard, Dominique; Brynaert, Nicolas
The present study extends the stereoscopic imaging principle for estimating the surface topography to two orientations, namely, normal to the electron beam axis and inclined at 70° as suited for EBSD analyses. In spite of the large angle difference, it is shown that the topography can be accurately determined using regularized global Digital Image Correlation. The surface topography is compared to another estimate issued from a 3D FIB-SEM procedure where the sample surface is first covered by a Pt layer, and its initial topography is progressively revealed from successive FIB-milling. These two methods are successfully compared on a 6% strained steel specimen in an in situ mechanical test. This analysis is supplemented by a third approach estimating the change of topography from crystal rotations as measured from successive EBSD images. This last technique ignores plastic deformation, and thus only holds in an elastic regime. For the studied example, despite the large plastic flow, it is shown that crystal rotation already accounts for a significant part of the deformation-induced topography. Copyright © 2018 Elsevier B.V. All rights reserved.
Lewis, Nathan D.
The term biometrics is used to describe the process of analyzing biological and behavioral traits that are unique to an individual in order to confirm or determine his or her identity. Many biometric modalities are currently being researched and implemented including, fingerprints, hand and facial geometry, iris recognition, vein structure recognition, gait, voice recognition, etc... This project explores the possibility of using corneal topography measurements as a trait for biometric identification. Two new corneal topographers were developed for this study. The first was designed to function as an operator-free device that will allow a user to approach the device and have his or her corneal topography measured. Human subject topography data were collected with this device and compared to measurements made with the commercially available Keratron Piccolo topographer (Optikon, Rome, Italy). A third topographer that departs from the standard Placido disk technology allows for arbitrary pattern illumination through the use of LCD monitors. This topographer was built and tested to be used in future research studies. Topography data was collected from 59 subjects and modeled using Zernike polynomials, which provide for a simple method of compressing topography data and comparing one topographical measurement with a database for biometric identification. The data were analyzed to determine the biometric error rates associated with corneal topography measurements. Reasonably accurate results, between three to eight percent simultaneous false match and false non-match rates, were achieved.
Different types of flood control measures are in practice. .... fertile agricultural land to increase more revenue ... The British East India Company at first ... As already mentioned, construction of ... 136.16 km, out of which the right bank accounts.
Akwar, Holy T.; Poppe, Cornelis; Wilson, Jeff; Reid-Smith, Richard J.; Dyck, Monica; Waddington, Josh; Shang, Dayue; McEwen, Scott A.
The main objectives of this study were to determine the prevalence and patterns of antimicrobial resistance in pigs on farms that medicated swine ration and those that did not. A total of 940 isolates of Escherichia coli from 188 pooled fecal samples obtained from weaner and finisher pigs on 47 farrow-to-finish swine farms (34 farms used in-feed medication and 13 did not) were tested for susceptibility to 21 antimicrobials using a breakpoint concentration method. The prevalence of resistance ...
Robinson, R J; Hensel, E C; Morabito, P N; Roundtree, K A
This paper presents the results of a clinical, observational, descriptive study to quantify the use patterns of electronic cigarette users in their natural environment. Previously published work regarding puff topography has been widely indirect in nature, and qualitative rather than quantitative, with the exception of three studies conducted in a laboratory environment for limited amounts of time. The current study quantifies the variation in puffing behaviors among users as well as the variation for a given user throughout the course of a day. Puff topography characteristics computed for each puffing session by each subject include the number of subject puffs per puffing session, the mean puff duration per session, the mean puff flow rate per session, the mean puff volume per session, and the cumulative puff volume per session. The same puff topography characteristics are computed across all puffing sessions by each single subject and across all subjects in the study cohort. Results indicate significant inter-subject variability with regard to puffing topography, suggesting that a range of representative puffing topography patterns should be used to drive machine-puffed electronic cigarette aerosol evaluation systems.
Tsiamis, Costas; Thalassinou, E; Poulakou-Rebelakou, E; Anogiatis-Pelé, D; Hatzakis, A
This review presents the medical and social role of British military doctors in the formation of the British sanitary campaign in the Ionian Islands during the period 1815-1864. They were the core of a health system based on the old sanitary model of the Venetian Republic, which was the former ruler of the region. The British innovation and reorganisation of the old lazarettos (a quarantine system for maritime travellers), the new marine sanitary procedures, the determination of quarantine duration for major infectious diseases along with the introduction of the vaccination system resulted in a satisfactory defence against epidemics in Greece during the 19th century. The British military physicians applied and established West European medical ideas, as well as the principles of preventive medicine, for the first time in the Greek territory and this is a historical example of a successful sanitary campaign based on the experience of military physicians and their collaboration with civilian physicians.
The last few decades have witnessed a flowering of interest in the history of science in the British Empire. This essay aims to provide an overview of some of the most important work in this area, identifying interpretative shifts and emerging themes. In so doing, it raises some questions about the analytical framework in which colonial science has traditionally been viewed, highlighting interactions with indigenous scientific traditions and the use of network-based models to understand scientific relations within and beyond colonial contexts.
Eckers, W.; Oppolzer, H.
The investigation of lattice defects in semiconductor crystals by conventional X-ray diffraction topography is very time-consuming. Exposure times can be reduced by using high-intensity X-rays and X-ray image intensifiers. The described system comprises a high-power rotating-anode X-ray tube, a remote-controlled X-ray topography camera, and a television system operating with an X-ray sensing VIDICON. System performance is demonstrated with reference to exploratory examples. The exposure time for photographic plates is reduced to 1/20 and for the X-ray TV system (resolution of the order of 30 μm) to 1/100 relative to that required when using a conventional topography system. (orig.) [de
Maas, Leo; Paci, Alexandre; Yuan, Bing
In a stratified sea, internal tides are supposedly generated when the tide passes over irregular topography. It has been shown that for any given frequency in the internal wave band there are an infinite number of exceptions to this rule of thumb. This ``stealth-like'' property of the topography is due to a subtle annihilation of the internal waves generated during the surface tide's passage over the irregular bottom. We here demonstrate this in a lab-experiment. However, for any such topography, subsequently changing the surface tide's frequency does lead to tidal conversion. The upshot of this is that a tidal wave passing over an irregular bottom is for a substantial part trapped to this irregularity, and only partly converted into freely propagating internal tides. Financially supported by the European Community's 7th Framework Programme HYDRALAB IV.
Omura, John; Buxton, Jane; Kaczorowski, Janusz; Catterson, Jason; Li, Jane; Derban, Andrea; Hasselback, Paul; Machin, Shelagh; Linekin, Michelle; Morgana, Tamsin; O’Briain, Barra; Scheifele, David; Dawar, Meena
Abstract Objective To explore the experiences of family physicians and pediatricians delivering immunizations, including perceived barriers and supports. Design Qualitative study using focus groups. Setting Ten cities throughout British Columbia. Participants A total of 46 family physicians or general practitioners, 10 pediatricians, and 2 residents. Methods A semistructured dialogue guide was used by a trained facilitator to explore participants’ experiences and views related to immunization delivery in British Columbia. Verbatim transcriptions were independently coded by 2 researchers. Key themes were analyzed and identified in an iterative manner using interpretive description. Main findings Physicians highly valued vaccine delivery. Factors facilitating physician-delivered immunizations included strong beliefs in the value of vaccines and having adequate information. Identified barriers included the large time commitment and insufficient communication about program changes, new vaccines, and the adult immunization program in general. Some physicians reported good relationships with local public health, while others reported the opposite experience, and this varied by geographic location. Conclusion These findings suggest that physicians are supportive of delivering vaccines. However, there are opportunities to improve the sustainability of physician-delivered immunizations. While compensation schemes remain under the purview of the provincial governments, local public health authorities can address the information needs of physicians. PMID:24627403
An excess of childhood leukaemia has been seen near some British nuclear installations, especially near the Sellafield reprocessing plant. The same result was found in a more general study including a large number of nuclear sites. Similar studies made in USA, Canada and France have been negative. Moreover, epidemiological studies made in England have discovered other childhood leukaemia clusters in areas far from nuclear facilities, and especially near potential sites of nuclear installations. Several explanations are suggested but no definite conclusion is yet possible. Doses from radioactive releases seem to be too low to account for the additional deaths from leukaemia by environmental contamination. A virus activation, which might be associated with population influx into rural isolated areas, has been considered. The hypothesis of genetic mutation induced by ionising radiation in the fathers of children with leukaemia has been made because a higher risk of leukaemia was observed for children of fathers employed at Sellafield. No firm conclusion is possible considering the small number of observed cases and the lack of excess leukaemias in the offspring of Hiroshima and Nagasaki survivors. The possibility of internal contamination, chemicals or even radon is discussed as other causes. Studies in progress might allow to find an answer to the problem of leukaemia in the vicinity of British nuclear installations [fr
The long-running saga of British Coal's decline is in its final stages with virtually no change from last October when the British government announced plants to close 31 of the 50 remaining mines. That announcement produced a political outcry but having privatized the electricity industry in 1990 the government had effectively left itself up the creek without a paddle. It had no powers to force the generators to buy more coal. The status of the British coal industry is discussed
Akwar, Holy T; Poppe, Cornelis; Wilson, Jeff; Reid-Smith, Richard J; Dyck, Monica; Waddington, Josh; Shang, Dayue; McEwen, Scott A
The main objectives of this study were to determine the prevalence and patterns of antimicrobial resistance in pigs on farms that medicated swine ration and those that did not. A total of 940 isolates of Escherichia coli from 188 pooled fecal samples obtained from weaner and finisher pigs on 47 farrow-to-finish swine farms (34 farms used in-feed medication and 13 did not) were tested for susceptibility to 21 antimicrobials using a breakpoint concentration method. The prevalence of resistance varied widely (0.0% to 81.3%) among the antimicrobials tested. Ninety percent of all the isolates tested were resistant to one or more antimicrobials. The most common multi-drug resistance patterns were to 2 to 6 antimicrobials. Resistance was significantly more frequent (P pigs compared to finisher pigs. These findings indicate that resistance to a broad range of antimicrobials was prevalent among fecal E. coli isolates of pigs on study farms, and that this constitutes a potential reservoir for resistance genes that could spread to pathogens. The findings also provide further evidence that use of medication in swine rations provides selective pressure for antimicrobial resistance in E. coli in pigs.
Janowski, Marianne; Loget, Nicolas; Bellahsen, Nicolas; Husson, Laurent; Le Pourhiet, Laetitia; Meyer, Bertrand
The main mechanism that explains high orogenic topographies is the isostatic adjustment due to crustal thickening. However in the Betic Cordillera (South Spain), the present-day elevation and crustal thickness are not correlated. That is at odds with the general premise of isostasy and requires reappraising the question of the driving mechanisms leading to the current topography. The Betics are located at the western edge of the alpine Mediterranean belt. Its Cenozoic orogenic building was disrupted by a major crustal thinning event induced by a slab rollback in the internal zones (Alboran domain) during Neogene. Topography was largely levelled and flooded by the sea during Neogene extension, and then has been folded since the Late Tortonian inversion. The present-day topography shows flat summits still preserved from fluvial regression in the internal zones (central and eastern Betics). These low-relief surfaces may be inherited from the Neogene planation toward sea-level as rocks cooling histories inferred from low-temperature thermochronology seem to point it out. Post-Tortonian shortening estimated thanks to a crustal-scale N-S cross-section in the eastern Betics (at the Sierra Nevada longitude) does not exceed few kilometers which is much lower than the shortening required by isostatic equilibrium, and is thus insufficient to explain the post-Tortonian topography building. We tested the hypothesis that mantle dynamics could in fact be an important mechanism that explains the topography of the Betics. We first computed the residual topography (i.e. the non-isostatic component of the elevation) using the most recent published Moho mapping of the area. In the western Betics, our results show important negative residual topography (down to -3 km) possibly associated with the west-Alboran slab suction. In the eastern Betics however, positive residual topography is important (up to +3 km) and can be explained by the dynamic mantle support of the topography, possibly
A short summary on X-ray topography, which is based on the dynamical theory of X-ray diffraction, is made. The applications and properties related to the use of the multiple diffraction technique are analized and discussed. (L.C.) [pt
When the power industry in Britain was privatized, British Energy plc (BE), whose head office is in Edingburgh, Scotland, was founded in July 1996. It is the only power utility in the world exclusively operating nuclear power stations. Operative business has remained the responsibility of the two regional supply companies, Nuclear Electric (NE) and Scottish Nuclear (SN) which, in addition to the modern PWR nuclear generating unit of Sizewell B, have included in the new holding company their advanced gas-cooled and gas-moderated reactor (AGR) units. The older gas-graphite reactor (GGR) plants were combined in the new Magnox Electric plc, Berkeley; at some later date, this company is to be merged with another nuclear power plant operator, British Nuclear Fuels plc (BNFL). Sizewell B, which was commissioned in 1995, is the last nuclear generating unit to be started up in the United Kingdom, for the time being. In times of low raw material prices and the need for a quick return on invested capital, BE is reluctant to run the risk associated with tying up capital for a long time. Instead, the company has backfitted its plants so that the production of electricity from nuclear power in Britain in 1996 of 92,476 GWh was increased by almost 10% over the 1995 level of 84,174 GWh. In addition to modernization and rationalization at home, BE together with Sizewell B vendor Westinghouse is engaged worldwide in the development and commercialization of future advanced reactors. This ensures that the know-how accumulated will be preserved and will be available for new nuclear power plants to be built in Britain in the next century. (orig.)
Linkin, Harriet Kramer
Describes and reports on a survey of 164 U.S. universities to ascertain what is taught as the current canon of British Romantic literature. Asserts that the canon may now include Mary Shelley with the former standard six major male Romantic poets, indicating a significant emergence of a feminist perspective on British Romanticism in the classroom.…
Poulsen, René Taudal
Book review of British Box Business: A History of OCL / edited by A. Bott SCARA, Goldaming, 2009, £17 (hb) 288 pages, illustrations, bibliography, index iSBn 139780955922701......Book review of British Box Business: A History of OCL / edited by A. Bott SCARA, Goldaming, 2009, £17 (hb) 288 pages, illustrations, bibliography, index iSBn 139780955922701...
The dissertation assesses the influence of British Celtic on the phonological development of English during and shortly after the Anglo-Saxon settlement period, ca. AD 450–700. By reconstructing and then comparing the phonological systems of both British Celtic and English at the time of contact, an
Full Text Available “Conversation Piece” is a British Art Studies series that draws together a group of contributors to respond to an idea, provocation or question. The conversation will develop as more respondents enter the debate. Fifteen contributors respond to the provocation "There's No Such Thing as British Art".
African Journals Online: Virgin Islands (British). Home > African Journals Online: Virgin Islands (British). Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Browse By Category · Browse Alphabetically · Browse By Country · List All Titles · Free to read Titles This Journal ...
The precautions introduced after the first 23 years experience of the use of x-rays for medical diagnosis proved adequate to eliminate the acute hazards of exposure, but it was much longer before it was realized that small doses that did not produce any acute effect could increase the risk of cancer. British radiologists who took up the specialty at different periods have, therefore, been studied to see if the risk has now been adequately controlled. Four groups have been studied starting respectively before 1921, in 1921-34, 1935-54, and 1955-77, corresponding approximately to periods when different limits of exposure were applied. Altogether 2698 male radiologists have been identified and all but 27 followed successfully to emigration, death, or survival to January 1 st 1997. Of the 1198 who had died, 228 are known to have died of cancer. Two problems arise in evaluating the carcinogenic hazard to which they were exposed: the assessment of the doses received and the selection of an appropriate control group with which to compare their mortality. The most appropriate comparison group would seem to be medical practitioners in general. In comparison with them, radiologists entering in the first 3 periods had increased risks of death from cancer though appreciably less than would have been predicted from the expected effect of the radiation they had received. Those who joined in the latest period had a relatively reduced risk, irrespective of any effect of the small dose of radiation they are likely to have received. Independent evidence suggests, however, that since 1951 radiologists have smoked less than other doctors and the lower than predicted risk in the groups exposed since 1920 is limited to smoking related cancers, the mortality from other cancers being higher than in doctors generally. In assessing the risk of occupational exposure to radiation, life-style has to be taken into consideration, as well as dose of radiation. (author)
After a short history of X-ray diffraction topography, from the early stage of laboratory X-ray topography to recent synchrotron-radiation applications, is described, the development of science and technology for the synchrotron X-ray topography and its industrial applications are reviewed in more detail. In addition, the recent trend to synchrotron topography research is clarified on the basis of several data obtained from 256 papers which have been published since 2000. (author)
Grabon, W; Pawlus, P
After two machining processes, a large number of surface topography measurements were made using Talyscan 150 stylus measuring equipment. The measured samples were divided into two groups. The first group contained two-process surfaces of random nature, while the second group used random-deterministic textures of random plateau parts and portions of deterministic valleys. For comparison, one-process surfaces were also analysed. Correlation and regression analysis was used to study the dependencies among surface texture parameters in 2D and 3D systems. As the result of this study, sets of parameters describing multi-process surface topography were obtained for two-process surfaces of random and of random-deterministic types. (papers)
Asadi-Pooya, Ali A; Asadollahi, Marjan; Shimamoto, Shoichi; Lorenzo, Matthew; Sperling, Michael R
We investigated the voltage topography of interictal spikes in patients with temporal lobe epilepsy (TLE) to see whether topography was related to etiology for TLE. Adults with TLE, who had epilepsy surgery for drug-resistant seizures from 2011 until 2014 at Jefferson Comprehensive Epilepsy Center were selected. Two groups of patients were studied: patients with mesial temporal sclerosis (MTS) on MRI and those with other MRI findings. The voltage topography maps of the interictal spikes at the peak were created using BESA software. We classified the interictal spikes as polar, basal, lateral, or others. Thirty-four patients were studied, from which the characteristics of 340 spikes were investigated. The most common type of spike orientation was others (186 spikes; 54.7%), followed by lateral (146; 42.9%), polar (5; 1.5%), and basal (3; 0.9%). Characteristics of the voltage topography maps of the spikes between the two groups of patients were somewhat different. Five spikes in patients with MTS had polar orientation, but none of the spikes in patients with other MRI findings had polar orientation (odds ratio=6.98, 95% confidence interval=0.38 to 127.38; p=0.07). Scalp topographic mapping of interictal spikes has the potential to offer different information than visual inspection alone. The present results do not allow an immediate clinical application of our findings; however, detecting a polar spike in a patient with TLE may increase the possibility of mesial temporal sclerosis as the underlying etiology. Copyright © 2016 Elsevier B.V. All rights reserved.
Nayegandhi, Amar; Yates, Xan; Brock, John C.; Sallenger, A.H.; Klipp, Emily S.; Wright, C. Wayne
These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Mississippi coastline, from Lakeshore to Petit Bois Island, acquired September 9-10, 2001. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative scanning lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS
Nayegandhi, Amar; Yates, Xan; Brock, John C.; Sallenger, A.H.; Bonisteel, Jamie M.; Klipp, Emily S.; Wright, C. Wayne
These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Alabama coastline, acquired October 3-4, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface, and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for pre-survey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that
Thirugnanachandran, Tharani; Ma, Henry; Singhal, Shaloo; Slater, Lee-Anne; Davis, Stephen M; Donnan, Geoffrey A; Phan, Thanh
It has been 40 years since the ischemic penumbra was first conceptualized through work on animal models. The topography of penumbra has been portrayed as an infarcted core surrounded by penumbral tissue and an extreme rim of oligemic tissue. This picture has been used in many review articles and textbooks before the advent of modern imaging. In this paper, we review our understanding of the topography of the ischemic penumbra from the initial experimental animal models to current developments with neuroimaging which have helped to further define the temporal and spatial evolution of the penumbra and refine our knowledge. The concept of the penumbra has been successfully applied in clinical trials of endovascular therapies with a time window as long as 24 h from onset. Further, there are reports of "good" outcome even in patients with a large ischemic core. This latter observation of good outcome despite having a large core requires an understanding of the topography of the penumbra and the function of the infarcted regions. It is proposed that future research in this area takes departure from a time-dependent approach to a more individualized tissue and location-based approach.
Measurements of topography can provide a wealth of information on landscape properties for managing hydrologic and geologic systems and conserving natural and agricultural resources. This article discusses the application of an airborne laser altimeter to measure topography and other landscape surface properties. The airborne laser altimeter makes 4000 measurements per second with a vertical recording resolution of 5 cm. Data are collected digitally with a personal computer. A video camera, borehole sighted with the laser, records an image for locating flight lines. GPS data are used to locate flight line positions on the landscape. Laser data were used to measure vegetation canopy topography, height, cover, and distribution and to measure microtopography of the land surface and gullies with depths of 15–20 cm. Macrotopography of landscape profiles for segments up to 4 km were in agreement with available topographic maps but provided more detail. Larger gullies with and without vegetation, and stream channel cross sections and their associated floodplains have also been measured and reported in other publications. Landscape segments for any length could be measured for either micro- or macrotopography. Airborne laser altimeter measurements of landscape profiles can provide detailed information on landscape properties or specific needs that will allow better decisions on the design and location of structures (i.e., roads, pipe, and power lines) and for improving the management and conservation of natural and agricultural landscapes. (author)
Fernández, Ariel; Kostov, Konstantin S.; Berry, R. Stephen
The kinetic data from the coarse representation of polypeptide torsional dynamics described in the preceding paper [Fernandez and Berry, J. Chem. Phys. 112, 5212 (2000), preceding paper] is inverted by using detailed balance to obtain a topographic description of the potential-energy surface (PES) along the dominant folding pathway of the bovine pancreatic trypsin inhibitor (BPTI). The topography is represented as a sequence of minima and effective saddle points. The dominant folding pathway displays an overall monotonic decrease in energy with a large number of staircaselike steps, a clear signature of a good structure-seeker. The diversity and availability of alternative folding pathways is analyzed in terms of the Shannon entropy σ(t) associated with the time-dependent probability distribution over the kinetic ensemble of contact patterns. Several stages in the folding process are evident. Initially misfolded states form and dismantle revealing no definite pattern in the topography and exhibiting high Shannon entropy. Passage down a sequence of staircase steps then leads to the formation of a nativelike intermediate, for which σ(t) is much lower and fairly constant. Finally, the structure of the intermediate is refined to produce the native state of BPTI. We also examine how different levels of tolerance to mismatches of side chain contacts influence the folding kinetics, the topography of the dominant folding pathway, and the Shannon entropy. This analysis yields upper and lower bounds of the frustration tolerance required for the expeditious and robust folding of BPTI.
Describes the British electricity-supply system and covers: the CEGB, nuclear power - AGR design, boiler plant development coal-fired boilers and oil-fired boilers, steam turbine/generators, boiler-feed pumps, pumped storage, gas turbine plants, transmission system including the link to France, the Sizewell-BPWR, future AGR development, future coal-fired stations, fluidized bed combustion, coal gasification, and wind energy developments. Also included is a list of British equipment suppliers to the electricity supply industry, and a buyer's guide to British equipment and services.
Noel Alpins1,2 1NewVision Clinics, Melbourne, VIC, Australia; 2Department Ophthalmology, Melbourne University, Melbourne, VIC, Australia It is encouraging to see the results in the article by Kanellopoulos “Topography-modified refraction (TMR): adjustment of treated cylinder amount and axis to the topography versus standard clinical refraction in myopic topography-guided LASIK”,1 where the combination of refractive and corneal data in the treatment parameters pro...
Crosby, Christopher; Nandigam, Viswanath; Baru, Chaitan; Arrowsmith, J. Ramon
High-resolution topography data acquired with lidar (light detection and ranging) technology are revolutionizing the way we study the Earth's surface and overlying vegetation. These data, collected from airborne, tripod, or mobile-mounted scanners have emerged as a fundamental tool for research on topics ranging from earthquake hazards to hillslope processes. Lidar data provide a digital representation of the earth's surface at a resolution sufficient to appropriately capture the processes that contribute to landscape evolution. The U.S. National Science Foundation-funded OpenTopography Facility (http://www.opentopography.org) is a web-based system designed to democratize access to earth science-oriented lidar topography data. OpenTopography provides free, online access to lidar data in a number of forms, including the raw point cloud and associated geospatial-processing tools for customized analysis. The point cloud data are co-located with on-demand processing tools to generate digital elevation models, and derived products and visualizations which allow users to quickly access data in a format appropriate for their scientific application. The OpenTopography system is built using a service-oriented architecture (SOA) that leverages cyberinfrastructure resources at the San Diego Supercomputer Center at the University of California San Diego to allow users, regardless of expertise level, to access these massive lidar datasets and derived products for use in research and teaching. OpenTopography hosts over 500 billion lidar returns covering 85,000 km2. These data are all in the public domain and are provided by a variety of partners under joint agreements and memoranda of understanding with OpenTopography. Partners include national facilities such as the NSF-funded National Center for Airborne Lidar Mapping (NCALM), as well as non-governmental organizations and local, state, and federal agencies. OpenTopography has become a hub for high-resolution topography
Foley, D.; Hertzog, S.; Scott, G.
Some of the challenges facing policy makers as we enter this century are related to regional air pollution and global climate change, where both are a consequence of the combustion of fossil fuels. Data on smog and particulates has been compiled for decades by medical authorities and regulators, thereby documenting the causes, the characteristics and the impact of global warming. Sustainable energy policies are required. A historic compromise was forged in July 2001 on how to implement the 1997 Kyoto Protocol. It is increasingly important for Canada to make energy policy decisions that support the protection of the climate. Key aspects of human activity, such as tourism, forestry, fishing, agriculture, water supplies and flows, infrastructure reliability and costs, and public health factors are at risk in British Columbia. For British Columbia to comply with the Kyoto Protocol, some sources would be able to expand emissions while others would have to reduce them much more to achieve an overall reduction. This document represents an outline and a vision for new opportunities and analyses the challenges facing energy patterns in British Columbia. It was presented to the British Columbia (BC) Energy Policy Task Force. This broad policy review is an ideal opportunity to build energy policies and related economic initiatives leading to new industries, new jobs, and increased energy security. The document is divided in five parts: the BC situation: trends and impacts, BC Hydro and the rush to gas, the BC gas turbine experience: conflict and controversy, gas and the changing dynamics of the BC energy market, and the clean energy path: lessons and policy recommendations. refs., 1 tab., 4 figs
Foley, D.; Hertzog, S.; Scott, G. (eds.)
Some of the challenges facing policy makers as we enter this century are related to regional air pollution and global climate change, where both are a consequence of the combustion of fossil fuels. Data on smog and particulates has been compiled for decades by medical authorities and regulators, thereby documenting the causes, the characteristics and the impact of global warming. Sustainable energy policies are required. A historic compromise was forged in July 2001 on how to implement the 1997 Kyoto Protocol. It is increasingly important for Canada to make energy policy decisions that support the protection of the climate. Key aspects of human activity, such as tourism, forestry, fishing, agriculture, water supplies and flows, infrastructure reliability and costs, and public health factors are at risk in British Columbia. For British Columbia to comply with the Kyoto Protocol, some sources would be able to expand emissions while others would have to reduce them much more to achieve an overall reduction. This document represents an outline and a vision for new opportunities and analyses the challenges facing energy patterns in British Columbia. It was presented to the British Columbia (BC) Energy Policy Task Force. This broad policy review is an ideal opportunity to build energy policies and related economic initiatives leading to new industries, new jobs, and increased energy security. The document is divided in five parts: the BC situation: trends and impacts, BC Hydro and the rush to gas, the BC gas turbine experience: conflict and controversy, gas and the changing dynamics of the BC energy market, and the clean energy path: lessons and policy recommendations. refs., 1 tab., 4 figs.
Poote, A E; van den Akker, O B A
There has been little interest in the research literature on public opinions regarding assisted conception and surrogacy, particularly in European countries, despite the growing evidence showing that problems in adaptation and coping may be related to perceived normative values. This study investigated British women's attitudes to surrogacy using components of the theory of planned behaviour (TPB). Questionnaires on attitudes to surrogacy and reasons for parenthood were completed by 187 women from the general public. Significant socio-demographic differences were found between women who were possibly willing (n = 76) and those who were unwilling (n = 111) to become surrogate mothers. General attitudes to surrogacy also differed between groups (P = 0.000). This study supported the predictive utility of components of the TPB, and differentiated adequately between groups on attitudes to recruitment for surrogacy (P = 0.000), the consequences of surrogacy (P = 0.000), factors that induce people to become surrogates (P = 0.000), social support (P = 0.000), having personal control (P = 0.002) and reasons for parenthood (P = 0.000). Age (P = 0.000), attitudes to advertising (P = 0.02) and the consequences of surrogacy (P = 0.05) predicted (un)willingness to become a potential surrogate mother. Further research is needed with larger sample sizes of potential surrogates to determine whether the predictive attitudes reported here translate to actual behaviours. The larger group which was not interested in considering becoming a surrogate scored significantly more negatively on all attitudes towards surrogacy. The negative attitudes reported by the 'unwilling to consider being a surrogate' group may reflect attitudes held by the majority of the population and are likely to be influenced by reports of stigma associated with surrogacy.
Seale, C; Lempp, H
Abstract Background The British medical student population has undergone rapid diversification over the last decades. This study focuses on medical students' views about their experiences in relation to ethnicity and gender during their undergraduate training within the context of the hidden curriculum in one British medical school as part of a wider qualitative research project into undergraduate medical education. Method We interviewed 36 undergraduate medical students in one British Medica...
Yang, Bijou; James, Simon; Lester, David
American university students owned more than twice as many credit cards as British university students. However, scores on a credit card attitude scale predicted the number of cards owned by respondents in both countries.
Thron, E. Michael
Examines the recent call for English departments to recognize literature that falls outside the British and American tradition. Suggests that we recognize English as a world language and choose books to teach accordingly. (JC)
The background, purposes, and methods of institutional efficiency studies conducted at selected British universities are discussed. The evaluations focused on financial management, purchasing, and building maintenance and space utilization. (MSE)
Growth Disparity between Medical Research and Medical Services in India. British rulers opened hospitals for modern medicine; medical colleges; nurses schools etc. in the 19th century to the joyous welcome of natives. During the same period, they set up Indian Research Fund Association two years ahead of the MRC of ...
Petrasova, A.; Tabrizian, P.; Harmon, B. A.; Petras, V.; Millar, G.; Mitasova, H.; Meentemeyer, R. K.
Understanding topography and its representations is crucial for correct interpretation and modeling of surface processes. However, novice earth science and landscape architecture students often find reading topographic maps challenging. As a result, many students struggle to comprehend more complex spatial concepts and processes such as flow accumulation or sediment transport.We developed and tested a new method for teaching hydrology, geomorphology, and grading using Tangible Landscape—a tangible interface for geospatial modeling. Tangible Landscape couples a physical and digital model of a landscape through a real-time cycle of hands-on modeling, 3D scanning, geospatial computation, and projection. With Tangible Landscape students can sculpt a projection-augmented topographic model of a landscape with their hands and use a variety of tangible objects to immediately see how they are changing geospatial analytics such as contours, profiles, water flow, or landform types. By feeling and manipulating the shape of the topography, while seeing projected geospatial analytics, students can intuitively learn about 3D topographic form, its representations, and how topography controls physical processes. Tangible Landscape is powered by GRASS GIS, an open source geospatial platform with extensive libraries for geospatial modeling and analysis. As such, Tangible Landscape can be used to design a wide range of learning experiences across a large number of geoscience disciplines.As part of a graduate level course that teaches grading, 16 students participated in a series of workshops, which were developed as serious games to encourage learning through structured play. These serious games included 1) diverting rain water to a specified location with minimal changes to landscape, 2) building different combinations of landforms, and 3) reconstructing landscapes based on projected contour information with feedback.In this poster, we will introduce Tangible Landscape, and
Riglet, P.; Sauvage, M.; Petroff, J.F.; Epelboin, Y.
A computer program based on the Takagi-Taupin differential equations for X-ray propagation in distorted crystals has been developed in order to simulate dislocation images in the Bragg case. The program is valid both for thin and thick crystals. Simulated images of misfit dislocations formed either in a thin epilayer or in a thick substrate are compared with experimental images obtained by synchrotron-radiation plane-wave topography. The influence of the various strain components on the image features is discussed. (author)
I am delighted to welcome readers to this inaugural issue of Surface Topography: Metrology and Properties (STMP). In these days of citation indexes and academic reviews, it is a tough, and maybe a brave, job to start a new journal. But the subject area has never been more active and we are seeing genuine breakthroughs in the use of surfaces to control functional performance. Most manufactured parts rely on some form of control of their surface characteristics. The surface is usually defined as that feature on a component or device, which interacts with either the environment in which it is housed (or in which the device operates), or with another surface. The surface topography and material characteristics of a part can affect how fluids interact with it, how the part looks and feels and how two bearing parts will slide together. The need to control, and hence measure, surface features is becoming increasingly important as we move into a miniaturized world. Surface features can become the dominant functional features of a part and may become large in comparison to the overall size of an object. Research into surface texture measurement and characterization has been carried out for over a century and is now more active than ever, especially as new areal surface texture specification standards begin to be introduced. The range of disciplines for which the function of a surface relates to its topography is very diverse; from metal sheet manufacturing to art restoration, from plastic electronics to forensics. Until now, there has been no obvious publishing venue to bring together all these applications with the underlying research and theory, or to unite those working in academia with engineering and industry. Hence the creation of Surface Topography: Metrology and Properties . STMP will publish the best work being done across this broad discipline in one journal, helping researchers to share common themes and highlighting and promoting the extraordinary benefits this
The paper focusses its attention to the medical work of the British Military hospitals stationed in Macedonia during the First World War, the surgical work carried out under very heavy conditions in improvised operating theatres as well as the treatment of the wounded and sick solders brought from the battlefields on the Macedonian Front.
Koizumi, Hideaki; Maki, Atsushi; Yamamoto, Tsuyoshi; Kawaguchi, Hideo
Optical topography is a completely non-invasive method to image the high brain function with the near infrared spectroscopy, does not need the restriction of human behavior for imaging and thereby is applicable even for infants. The principle is based on irradiation of the near infrared laser beam with the optical-fiber onto the head surface and detection with the fiber of the reflection, of which spectroscopy for blood-borne hemoglobin gives the local cerebral homodynamics related with the nerve activity. The infrared laser beam of 1-10 mW is found safe on direct irradiation to the human body. The topography is applicable in the fields of clinical medicine like internal neurology (an actual image of the activated Broca's and Welnicke's areas at writing is presented), neurosurgery, psychiatry and pedriatric neurology, of developmental cognitive neuroscience, of educational science and of communication. ''MIT Technology Reviews'' mentions that this technique is one of 4 recent promising innovative techniques in the world. (N.I.)
Yang, Genevieve J; Murray, John D; Glasser, Matthew; Pearlson, Godfrey D; Krystal, John H; Schleifer, Charlie; Repovs, Grega; Anticevic, Alan
Schizophrenia (SCZ) is a disabling neuropsychiatric disease associated with disruptions across distributed neural systems. Resting-state functional magnetic resonance imaging has identified extensive abnormalities in the blood-oxygen level-dependent signal in SCZ patients, including alterations in the average signal over the brain-i.e. the "global" signal (GS). It remains unknown, however, if these "global" alterations occur pervasively or follow a spatially preferential pattern. This study presents the first network-by-network quantification of GS topography in healthy subjects and SCZ patients. We observed a nonuniform GS contribution in healthy comparison subjects, whereby sensory areas exhibited the largest GS component. In SCZ patients, we identified preferential GS representation increases across association regions, while sensory regions showed preferential reductions. GS representation in sensory versus association cortices was strongly anti-correlated in healthy subjects. This anti-correlated relationship was markedly reduced in SCZ. Such shifts in GS topography may underlie profound alterations in neural information flow in SCZ, informing development of pharmacotherapies. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: firstname.lastname@example.org.
Wells, Gary G; Ruiz-Gutiérrez, Élfego; Le Lirzin, Youen; Nourry, Anthony; Orme, Bethany V; Pradas, Marc; Ledesma-Aguilar, Rodrigo
Droplet evaporation on solid surfaces is important in many applications including printing, micro-patterning and cooling. While seemingly simple, the configuration of evaporating droplets on solids is difficult to predict and control. This is because evaporation typically proceeds as a "stick-slip" sequence-a combination of pinning and de-pinning events dominated by static friction or "pinning", caused by microscopic surface roughness. Here we show how smooth, pinning-free, solid surfaces of non-planar topography promote a different process called snap evaporation. During snap evaporation a droplet follows a reproducible sequence of configurations, consisting of a quasi-static phase-change controlled by mass diffusion interrupted by out-of-equilibrium snaps. Snaps are triggered by bifurcations of the equilibrium droplet shape mediated by the underlying non-planar solid. Because the evolution of droplets during snap evaporation is controlled by a smooth topography, and not by surface roughness, our ideas can inspire programmable surfaces that manage liquids in heat- and mass-transfer applications.
Personal risk estimation is discussed under the following headings: history and background of risk study, the nature and measurement of risk, the main causes of death, major risk factors (smoking, alcohol and other drugs, diet), occupational risks, transport, risks in the home, recreational risks, medicine and surgery, natural disasters, chemical risks, the perception, acceptability and management of risk, and risks and energy production. The latter chapter includes consideration of comparative risks in electricity generation. The extraction of fuel for, construction and operation of nuclear power stations is discussed, including references to Sellafield, leukemia clustering, and the Three Mile Island and Chernobyl disasters.
The author discusses here the efforts made to revive Ayurveda in the twentieth century by the protagonists of Ayurveda during the national movement and appraises how far political support and State patronage did good for the recrudescence of Ayurveda.
Focusing on British graduates from Gipsy Hill Training College (GHTC) in London, this article illustrates transnational history's concerns with the reciprocal flows of people and ideas within and beyond the British Empire. GHTC's progressive curriculum and culture positioned women teachers as agents of change, and the article highlights the lives…
Bell, Marlesha C; Fahmie, Tara A
The current study evaluated a screening procedure for multiple topographies of problem behavior in the context of an ongoing functional analysis. Experimenters analyzed the function of a topography of primary concern while collecting data on topographies of secondary concern. We used visual analysis to predict the function of secondary topographies and a subsequent functional analysis to test those predictions. Results showed that a general function was accurately predicted for five of six (83%) secondary topographies. A specific function was predicted and supported for a subset of these topographies. The experimenters discuss the implication of these results for clinicians who have limited time for functional assessment. © 2018 Society for the Experimental Analysis of Behavior.
Encountering Abrupt Topography (FLEAT) Bo Qiu Dept of Oceanography, University of Hawaii at Manoa 1000 Pope Rd. Honolulu, HI 96822 phone: (808) 956...c) to explore relevant dynamics by using both simplified models and OGCM output with realistic topography and surface boundary conditions...scale abyssal circulation, we propose to use the Hallberg Isopycnal Model (HIM). The HIM allows sloping isopycnals to interact with bottom topography
The physical foundation of X-ray diffraction topography, its methods, the achievements in image theory, the stages of evolution were described in this review. It was found that modern topography is well along in development associated with the use of third-generation synchrotron radiation and with its adaptation to advance materials and problems of materials science. Some proposals about prospects for X-ray topography progress in the future have been made [ru
Lun-Tao Tong Tai-Rong Guo
Full Text Available Gravity terrain correction is used to compensate for the gravitational effects of the topography residual to the Bouguer plate. The seafloor topography off the eastern offshore of Taiwan is extremely rugged, and the depth of the sea bottom could be greater than 5000 m. In order to evaluate the terrain effect caused by the seafloor topography, a modern computer algorithm is used to calculate the terrain correction based on the digital elevation model (DEM.
Ghosh, A.; Singh, S.
Himalaya-Tibetan plateau region has the highest topography in the world. Various studies have been done to understand the mechanisms responsible for sustaining this high topography. However, the existence of dynamic topography in this region is still uncertain, though there have been some studies exploring the role of channel flow in lower crust leading to some topography. We investigated the role of radial mantle flow in this region by studying the relationship between geoid and topography. High geoid-to-topography ratios (GTR) were observed along the Himalayas suggesting deeper compensation mechanisms. However, further north, the geoid and topography relationship became a lot more complex as high as well as low GTR values were observed. The high GTR regions also coincided with area of high filtered free air gravity anomalies, indicating dynamic support. We also looked at the spectral components of gravity, geoid and topography, and calculated response functions to distinguish between different compensation mechanisms. We estimated the average elastic thickness of the whole region to be around 40 km from coherence and admittance studies. The GTR and admittance-coherence studies suggest deeper mass anomalies playing a role in supporting the topography along Himalayas and the area between Altyn Tagh and Kunlun faults.
Lakshmoji, K.; Prabakar, K.; Tripura Sundari, S.; Jayapandian, J.; Tyagi, A. K.; Sundar, C. S.
We provide direct experimental evidence to show that difference in surface topography on opposite sides of an uncoated microcantilever induces bending, upon exposure to water molecules. Examination on opposite sides of the microcantilever by atomic force microscopy reveals the presence of localized surface features on one side, which renders the induced stress non-uniform. Further, the root mean square inclination angle characterizing the surface topography shows a difference of 73° between the opposite sides. The absence of deflection in another uncoated microcantilever having similar surface topography confirms that in former microcantilever bending is indeed induced by differences in surface topography
This article draws on over 60 years of British medical journals and psychiatry textbooks to indicate the chronological stages of the reception of Eugen Bleuler in British psychiatry. Bleuler was already well known in Britain before his schizophrenia book appeared, with the journals containing numerous references, mainly positive, to his work. The psychiatry textbooks, however, were slower to integrate his contribution. This paper argues that this was not due to Bleuler\\'s placing Freud on a par with Kraepelin, but because of the early negative reaction to Kraepelin\\'s dementia praecox concept, despite Bleuler\\'s wider and less ominous conception of the illness.
Full Text Available In view of recent criticisms concerning vowel symbols in some British English dictionaries (in particular by J. Windsor Lewis in JIPA (Windsor Lewis, 2003, with regard to the Oxford Dictionary of Pronunciation (Upton, 2001, this article extends the discussion on English phonemic transcriptions by including those that typically occur in standard American dictionaries, and by comparing the most common conventions of British and American dictionaries. In addition to symbols for both vowels and consonants, the paper also deals with the different representations of word accentuation and the issue of consistency regarding application of phonemic (systemic, broad, rather than phonetic (allophonic, narrow transcription. The different transcriptions are assessed from the points of view of their departures from the International Phonetic Alphabet, their overlapping with orthographic representation (spelling and their appropriateness in terms of reflecting actual pronunciation in standard British and/or American pronunciation.
British companies are making more inroads in exploring for oil and gas off Viet Nam. British Gas plc won a 25 year production sharing contract for a license off southern Viet Nam in the South China Sea. Meantime, London independent Lasmo plc started seismic surveys on the block adjoining the British Gas block. Separately, Thailand and Viet Nam have reached agreement to jointly explore for and develop oil and gas found in waters claimed by both countries. Plans call for the two countries to draw up joint development plans covering oil and gas resources in the southeastern fringe of the Gulf of Thailand. Bangkok officials say they would have preferred to delineate maritime boundaries with Hanoi, but opted for the joint development accord, noting that Thailand and Malaysia had taken 12 years to resolve a similar dispute
The Green Paper, 'Energy Policy - a Consultative Document' (HC-Cmnd--7101) affords a valuable insight into official attitudes towards the future of the British energy market. The present author challenges some of the energy supply and demand forecasts that are presented in the Working Document; in particular, he questions the optimistic market forecasts that continue to dominate official thinking about the coal industry; and he proposes that an alternative strategy is required for the British coal industry, one that involves quite painful choices of an economic, geographical, social and environmental nature.
Farrell, Sinead Louise; Mcadoo, David C.; Laxon, Seymour W.; Zwally, H. Jay; Yi, Donghui; Ridout, Andy; Giles, Katherine
ICESat and Envisat altimetry data provide measurements of the instantaneous sea surface height (SSH) across the Arctic Ocean, using lead and open water elevation within the sea ice pack. First, these data were used to derive two independent mean sea surface (MSS) models by stacking and averaging along-track SSH profiles gathered between 2003 and 2009. The ICESat and Envisat MSS data were combined to construct the high-resolution ICEn MSS. Second, we estimate the 5.5-year mean dynamic topography (MDT) of the Arctic Ocean by differencing the ICEn MSS with the new GOCO02S geoid model, derived from GRACE and GOCE gravity. Using these satellite-only data we map the major features of Arctic Ocean dynamical height that are consistent with in situ observations, including the topographical highs and lows of the Beaufort and Greenland Gyres, respectively. Smaller-scale MDT structures remain largely unresolved due to uncertainties in the geoid at short wavelengths.
Clausen, Jeppe Sandvik
The thesis describes and demonstrates the possibilities for utilization of structural colors in mass fabricated plastic products as replacement for or in combination with pigments and inks. The motivation is the possible advantages related to re-cycling and re-use of plastic by limiting the number......-polymer interface is suppressed. This improves the ability to see through a clear plastic in the presence of specular reflection. The tapered nanostructures are also utilized to enhance the chroma of pigmented polymers. Larger tapered structures fabricated in a similar manor are shown to work as color filters....... Through an experimental study is the color of the transmitted light linked directly to the random topography of the surface by use of diffraction theory. The color effects from periodic structures and how these might be employed to create bright colors are investigated. This is done both for opaque...
M. J. Pajand
Full Text Available Introduction: Topography is an important and effective property affecting the soil quality. Some researchers demonstrated that degree and aspect of land slope may influence the particle size distribution and gravel. Slope degree affects the surface and subsurface run-off, drainage, soil temperature, stability of soil aggregates and soil erosion. This research was carried out to determine the spatial variation of soil properties in different slope degrees of northern and southern slopes in Khorasan Razavei province, Iran. Material and Methods: This study was performed in Sanganeh research station (longitude 60o 15ʹ60ʺ and latitude 36o 41ʹ 36ʺ, of north-eastern, Khorasan Razavi province of Iran. In order to study the effects of topography on some soil physical and chemical properties, a topo-sequence with the same slope length, parent materials and cover crops was selected. 30 soil samples (0-30 cm depth were collected from different slopes of less than 5, 5-15, 15-30, 30-50 and more than 50 percent of both southern and northern aspects. In this study, the soil particle size distribution (texture was measured by hydrometer method, organic carbon and calcium carbonate were determined by wet oxidation and titration with HCl 6 M, respectively and soil structural stability index, aggregates mean weight diameter and particles fractal dimension were calculated by related equations. Finally, the studied soil properties of 5 slopes (less than 5, 5-15, 15-30, 30-50, and more than 50% and 2 aspects (north and south with 3 replicates were compared by nested experimental design and Tuky test in JMP statistical software. Results and Discussion: The maximum and minimum clay contents as well as fractal dimension and organic carbon contents were found in less than 5% and more than 50% of south slopes, respectively. Clay content and fractal dimension in north aspect were also significantly (P
Nikora, V.; Goring, D.
In this paper we present a systematic study of the Mars topography focusing on the statistical distributions and maps of the 5 deg.x 5 deg.cell-averaged mean elevations, standard deviations, skewness and kurtosis coefficients, and power spectra. Altogether, the obtained data suggest that at a 5 deg.x 5 deg.cell scale a large portion of the Martian surface may be reasonably considered as a Gaussian random field with a three-range spectrum consisting: (1) a high-energy low-wave-number range (∼0.003 -1 ) where the spectrum may deviate from a power law and attain a maximum; (2) scaling range 1 (∼0.03 -1 ) where the spectrum may be well approximated as S(k)∝k -β 1 ; and (3) scaling range 2 (∼(0.2-0.3) -1 ) where the spectrum may be also approximated as a power function but with a different exponent, i.e., S(k)∝k -β 2 . The most probable values for the exponents are β 1 =(2.2-2.4) and β 2 =3.8. The data show that the separation of these two scaling ranges most frequently occurs at L c ∼3.3 km. At a scale larger than the 5 deg.x 5 deg.cell scale the topography is highly intermittent with patchy spatial distributions of the key statistical moments. This patchiness is superimposed with systematic north-to-south trends in statistical properties, reflecting the crustal dichotomy of the planet and large-scale differences in the surface-forming processes
Full Text Available This essay explores the ways in which the exhibition Real/Life: New British Art was conceived and received in Japan, where contemporary British art has been shown since the 1960s. Taking place at five museums in the country between 1998 and 1999, the exhibition aimed to showhow British artists in the 1990s struggled with realities, internal and external, but its response was not as satisfactory as was expected. The essay examines the exhibition as a turning point for the transformation of exhibition culture in Japan from nationally themed exhibitions to showcases of contemporary art in the global context.
Feng, Xiaobing; Quagliotti, Danilo; Maculotti, Giacomo
Optical instruments for areal topography measurement can be especially sensitive to noise when scanning is required. Such noise has different sources, including those internally generated and external sources from the environment.......Optical instruments for areal topography measurement can be especially sensitive to noise when scanning is required. Such noise has different sources, including those internally generated and external sources from the environment....
Zavala Sansón, L.; Heijst, van G.J.F.
This paper presents a general two-dimensional model for rotating barotropic flows over topography. The model incorporates in a vorticity–stream function formulation both inviscid topography effects, associated with stretching and squeezing of fluid columns enforced by their motion over variable
1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Investigating Flow Features Near Abrupt Topography in...waves generated by flow over topography and mesoscale eddies generated by flow past islands. Having identified the prime locations in the region for such
Anell, Ingrid Anna Margareta; Thybo, Hans; Stratford, Wanda Rose
the Shetland platform continued throughout the Cenozoic while supply from southern Norway increased markedly around the Eocene–Oligocene, coeval with the greenhouse–icehouse transition. Mass balance calculations of sediment and eroded rock volumes suggest that while some topography along the western margin...... that Plio-Pleistocene erosion over-deepened a pre-existing topography....
Nyquist, J.E.; Doll, W.E.; Davis, R.K.; Hopkins, R.A.
Analysis of seismic refraction data collected at a proposed site of the Advanced Neutron Source (ANS) Facility showed a strong correlation between surface and bedrock topography. By combining seismically determined bedrock elevation data with surface elevation data using cokriging, we were able to significantly improve our map of bedrock topography without collecting additional seismic data
Vrijling, A C L; Braaf, B.; Snellenburg, J.J.; de Lange, F.; Zaal, M.J.W.; van der Heijde, G.L.; Sicam, V.A.D.P.
Purpose. To validate the clinical performance of point-source corneal topography (PCT) in postpenetrating keratoplasty (PKP) eyes and to compare it with conventional Placido-based topography. Methods. Corneal elevation maps of the anterior corneal surface were obtained from 20 post-PKP corneas using
A treatment is given of the problem of surface diffusion processes occurring during surface topography development, whenever a surface is simultaneously seeded with impurities and ion bombarded. The development of controllable topography and the importance of surface diffusion parameters, which can be obtained during these studies, are also analyzed. 101 refs.; 7 figs.; 2 tabs
Woodley, Alan; Wilson, Jane
Using results from a survey of British graduates, examined outcomes of higher education for older students, including their current employment situation, relationship of degree to job, and student satisfaction. Found that mature students are an extremely heterogeneous group, with differences in outcomes by age and mode of study. (EV)
Countries around the world refer to twenty-first century education as essential to maintaining personal and national economic advantage and draw on this discourse to advocate for and embark on educational reform. This paper examines issues around education reform, particularly in British Columbia. It argues that reformers should give careful…
Kruse, Frigga; Hacquebord, Louwrens
This paper looks at the relationship between Spitsbergen in the European High Arctic and the global British Empire in the first quarter of the twentieth century. Spitsbergen was an uninhabited no man's land and comprised an unknown quantity of natural resources. The concepts of geopolitics and New
The author criticizes the British authorities' response to Chernobyl fallout, briefly examines the deficiencies in monitoring arrangements in Scotland, in particular the lack of weather radar cover for that region, and comments on the new National Response Plan and monitoring network, with reference to venison, rainwater, freshwater fish and game, and milk. (U.K.)
The radioactive discharges from British Nuclear Fuels Sellafield, Cumbria, reprocessing plant to the sea are discussed. Statements that have been made by various individuals and groups about the contamination of the sea, the coast and places inland, and the biological effects of plutonium and americium, are discussed in detail. Particular stress is placed on statements about increased incidence of cancers. (U.K.)
Kruse, Frigga; Claughton, P.; Mills, C.
The LASHIPA project participated in the recent International Polar Year to evaluate the large-scale historical exploitation of polar areas. This sub-project looks at the role of British actors in the economic and geopolitical development of the European High Arctic during the early twentieth
In response to concerns about the place and nature of dance history in British higher education curricula, a database was compiled of representative but significant examples of modules which focused directly on the teaching and learning of history, or had history as a key component. An analysis is presented of these modules in terms of the place…
British Columbia Council on Admissions and Transfer, 2016
"Advising" consists of those activities and tasks that result in providing information to students. British Columbia's (BC) post-secondary education has evolved over the past number of years and student advising has changed along with it. Post-secondary institutions are currently challenged to increase student engagement, improve…
In Britain, fundamental physics is in a pickle ISAAC NEWTON, besides being the founder of modern physics, was also master of Britain's mint. That is a precedent which many British physicists must surely wish had become traditional. At the moment, money for physics is in short supply in Britain.
Glukhov Aleksandr A.
Full Text Available The topography of the Tsarev settlement site, one of major Golden Horde monuments in the Lower Volga region, is analyzed. The first descriptions of the settlement refer to the second half of the 18th century, while the initial large-scale excavations on the monument were conducted in the mid-19th century. By that time, the scientific community had adhered to the opinion that the ruins of Sarai (the city mainly associated with the Tsarev settlement site would stretch to a great distance from the Akhtuba river-head to Kolobovka village. The results of archaeological research of the 20th – early 21st century make it possible to challenge this view. To date, it is an established fact that the size of the actual urban area had constituted 5 x 2.2–2.3 km. The southern part of the city was occupied by the estates of the nobility, the central and northern parts were represented by trade and artisan quarters. Around the city, there were suburban cemeteries, including brick mausoleums (the ruins of which could be mistaken for the remains of dwellings in the 19th century, as well as the areas of irrigated agriculture.
Le Naour, L.
The limitations of x-ray topography methods are due to the variety of structures studied and to the variation of the amplitude of the scattering of incident beams. It is difficult to evaluate the aberrations and the imperfections of the material studied. Interpretation of the x-ray images will often be delicate and that is aggravated by the complexity of the diffraction spectrum of uranium. This negative aspect is compensated for by the advantage that chemical or electrochemical preparations of the alloy surface, along with alterations that can take place and the lack of trueness are avoided. Precise and very reproducible numerical data can be derived from the patterns. The structure of alloys, at a given scale, is revealed and characterized by quantitative parameters such as size of grains or sub-grains, dispersion of their dimensions, mutual disorientations and the continuous or discontinuous nature of the latter. The results of this research, therefore, justify the use of methods inspired by the Berg-Barrett technique. These diffraction procedures constitute a useful means for investigating many elements of microstructure that closely govern the behavior under irradiation of the materials being examined
Seewig, J.; Eifler, M.
The ISO standards which are related to the calibration of areal surface topography measuring instruments are the ISO 25178-6xx series which defines the relevant metrological characteristics for the calibration of different measuring principles and the ISO 25178-7xx series which defines the actual calibration procedures. As the field of areal measurement is however not yet fully standardized, there are still open questions to be addressed which are subject to current research. Based on this, selected research results of the authors in this area are presented. This includes the design and fabrication of areal material measures. For this topic, two examples are presented with the direct laser writing of a stepless material measure for the calibration of the height axis which is based on the Abbott- Curve and the manufacturing of a Siemens star for the determination of the lateral resolution limit. Based on these results, as well a new definition for the resolution criterion, the small scale fidelity, which is still under discussion, is presented. Additionally, a software solution for automated calibration procedures is outlined.
Li, Zihui; Meng, Fanhao; Liu, Xuanyong
Here we have developed a convenient method to fabricate wettability controllable surfaces that can be applied to various nanostructured surfaces with complex shapes for different industrial needs. Diamond-like carbon (DLC) films were synthesized on titanium substrate with a nanowire structured surface using plasma immersion ion implantation and deposition (PIII&D). The nanostructure of the DLC films was characterized by field emission scanning electron microscopy and found to grow in a rippling layer-by-layer manner. Raman spectroscopy was used to investigate the different bonding presented in the DLC films. To determine the wettability of the samples, water contact angles were measured and found to vary in the range of 50°-141°. The results indicated that it was critical to construct a proper surface topography for high hydrophobicity, while suitable ID/IG and sp2/sp3 ratios of the DLC films had a minor contribution. Superhydrophobicity could be achieved by further CF4 implantation on suitably structured DLC films and was attributed to the existence of fluorine. In order to maintain the nanostructure during CF4 implantation, it was favorable to pre-deposit an appropriate carbon content on the nanostructure, as a nanostructure with low carbon content would be deformed during CF4 implantation due to local accumulation of surface charge and the following discharge resulting from the low conductivity.
Zhao Jiyong; Jiang Jianhua; Tian Yulian
Characteristics of the synchrotron radiation source for X-ray topography study at Beijing Synchrotron Radiation Laboratory (BSRL) is described, local geometrical resolution of topographies is discussed, and the diffracting intensities of white beam topography is given
WACB) as an economic integration effort in British West Africa. Through a collaborative effort between this public institution and a private company, the Bank of British West Africa, British West African colonies were not only unified but also the way ...
Stitzer, Maxine L.; Vandrey, Ryan
Rationale Little is known about the smoking topography characteristics of heavy cannabis users. Such measures may be able to predict cannabis use-related outcomes and could be used to validate self-reported measures of cannabis use. Objectives The current study was conducted to measure cannabis smoking topography characteristics during periods of ad libitum use and to correlate topography assessments with measures of self-reported cannabis use, withdrawal and craving during abstinence, and cognitive task performance. Methods Participants (N=20) completed an inpatient study in which they alternated between periods of ad libitum cannabis use and abstinence. Measures of self-reported cannabis use, smoking topography, craving, withdrawal, and sleep measures were collected. Results Participants smoked with greater intensity (e.g., greater volume, longer duration) on initial cigarette puffs with a steady decline on subsequent puffs. Smoking characteristics were significantly correlated with severity of withdrawal, notably sleep quality and architecture, and craving during abstinence, suggesting dose-related effects of cannabis use on these outcomes. Smoking characteristics generally were not significantly associated with cognitive performance. Smoking topography measures were significantly correlated with self-reported measures of cannabis use, indicating validity of these assessments, but topography measures were more sensitive than self-report in predicting cannabis-related outcomes. Conclusions A dose–effect relationship between cannabis consumption and outcomes believed to be clinically important was observed. With additional research, smoking topography assessments may become a useful clinical tool. PMID:21922170
Oliveira, V.; Vilar, R.; Conde, O.
Laser machining is increasingly appearing as an alternative for micromachining of ceramics. Using ceramic materials using excimer lasers can result in smooth surfaces or in the formation of cone-like or columnar topography. Potential applications of cone-shaped or columnar surface topography include, for example, light trapping in anti-reflection coatings and improvement of adhesion bonding between ceramic materials. In this communication results of a comparative study of surface topography change during micromachining of several ceramic materials with different ablation behaviors are reported. (orig.)
James, L. Douglas
This proceedings of an international workshop at the Flood Hazard Research Centre (Queensway, Enfield, Middlesex, U.K.) begins by noting how past British research on flood problems concentrated on refining techniques to implement established policy. In contrast, research covered in North American and Australian publications involved normative issues on policy alternatives and administrative implementation. The workshop's participants included 16 widely recognized scientists, whose origins were about equally divided between Britain and overseas; from this group the workshop's organizers expertly drew ideas for refining British urban riverine flood hazard management and for cultivating links among researchers everywhere. Such intellectual exchange should be of keen interest to flood hazard program managers around the world, to students of comparative institutional performance, to those who make policy on protecting people from hazards, and to hydrologists and other geophysicists who must communicate descriptive information for bureaucratic, political, and public decision- making.
The efforts being made to include Aboriginal communities in land use planning in British Columbia are discussed. British Columbia is in the midst of historic changes with respect to land and resource allocation, use and management. Historic trends in land use allocation and management are contrasted with land use planning and resource management of today. The impact of provincial government moves to double park space within the province, and the Protected Areas Strategy initiative will have on the natural gas and petroleum industry is discussed. New efforts being made to include First Nations directly in land use planning discussions in ways that do not prejudice treaty negotiations, are reviewed. Creation of a new Oil and Gas Commission in the Fort St. John area, is cited as the most recent example of the interconnections between First Nations communities and other public and industry stakeholders in land use planning in the province
The experience of British steel is that there is a serious and continuing threat of radioactive material being included in scrap delivered to steelworks. All scrap entering the steelworks is monitored for radioactivity. The scrap suppliers and the national authorities have recognized the difficulties caused by the presence of radioactivity in scrap, and are working to minimise the problem. Both domestic and imported scrap has been found to contain radioactivity, but the imported scrap is much more likely to contain radioactivity. If radioactivity is found the Environmental Agency is informed, and established procedures are used to minimise the hazard, and to isolate the radioactivity. Detecting, and isolating radioactive scrap, and preventing it being re-melted in the steelmaking process, is part of the overall commitment of British Steel to work safely, and to provide a safe, good quality, product (author)
This presentation discussed wind energy developments in British Columbia (BC). There are currently more than 5000 MW of wind power development activities in British Columbia, but only 325 MW of wind power purchase agreements (PPAs). Various renewable portfolio standards and greenhouse gas (GHG) initiatives are now being use to create demand for additional renewable energy development in the northwestern United States. Studies have demonstrated that BC wind export initiatives have the potential to deliver wind power to markets in the Pacific northwest. Canadian transmission export proposals are now examining methods of bringing renewable energy to areas with high load demands. However, the United States has more than 240,000 MW of proposed wind projects for key markets in the northwestern region. It was concluded that activities in United States wind development are now posing a challenge to Canadian wind energy exporters. Various transmission projects in the United States are now looking at developing renewable energy sources close to BC. tabs., figs
Phil Allen, Peter Ashton Jones, Jake Clark, Richard Clegg, Dan Coombs, Nelson Diplexcito, Nadine Feinson, Mick Finch, Richard Hamilton, Dan Hays, Gavin Lockheart, Andrea Medjesi Jones, David Leeson, Duncan Newton, Sarah Pickstone, Colin Smith, John Stark, Michael Stubbs, James White, Mark Wright.\\ud \\ud Dirty Pop, curated for &Model by Mark Wright, presents twenty contemporary painters whose work connects with Pop Art of the 1960’s, and particularly the legacy of the important British artist ...
Electricity has been traded in British Columbia since the turn of the century. In 1988, the provincial government established the British Columbia Power Exchange Corporation (Powerex) to conduct electricity trade activities in order to make the most efficient use of the electrial system and generate benefits for British Columbians. The trade is made possible by an interconnected system linking producers and consumers in western Canada and the USA. Provincial participants in the trade include British Columbia Hydro, independent power producers, and cogenerators. Benefits of the electricity trade include generation of revenue from sale of surplus power, being able to buy electricity when the mainly hydroelectric provincial system is in a drought condition or when major shutdowns occur, and enabling postponement of development of new power projects. Powerex conducts its trade under provincial and federal permits and licenses. Different types of trade contracts are negotiated depending on the amount and availability of electricity and the kind of trade being conducted. Exchanges and coordination agreements allow transfer and return between utilities with no net export occurring, allowing balancing of loads between different reigons. Surplus electricity is bought or sold on a short- or long-term basis and on firm or non-firm terms. Electricity exports are not subsidized and are only allowed if the electricity is surplus to provincial needs and can be sold at a profit. A new provincial policy allows private industry to export long-term firm electricity; this involves construction of new private-sector generating facilities solely for the purpose of export. 1 fig
This thesis presents young British readers’ engagement with manga regarding literary, aesthetic, social, and cultural dimensions. The study explores young readers’ points of views of their reading preference – manga. I investigated how children interpreted manga, with respect to the artistic techniques, the embedded ideologies, and the cultural elements therein. I also looked into children’s participation in manga fandom and its social meanings. This allowed me to explore what attracted Briti...
the imperial diasporas, identities and networks that developed as the British engineering profession established connections on the African continent. Using a wide range of primary sources that include correspondence, diaries, technical reports, institutional minutes and periodicals, Andersen reconstructs...... the networks and activities of Britain's engineers while focusing on London as a centre of imperial expansion. By treating Britain and the empire as an interconnected zone heanalyses the ways in whichideas , people and technologies circulated during the critical period....
Chan, Yiu Man
Evaluates the self-esteem scores of 1303 children, including Chinese children from Britain and Hong Kong and white British children, using the Coopersmith Self-Esteem Inventory. Finds that British Chinese have significantly higher self-esteem than the Hong Kong children, but there is little difference among white British children. (CMK)
Moghadam, B. [Powerex, Vancouver, BC (Canada)
An open access wholesale transmission tariff (WTS) has been in place in British Columbia since 1997, and wholesale electricity can be sold to wholesale purchasers by independent producers located within the province. Customers range from municipalities to British Columbia Hydro (BC Hydro), to Powerex, to UtiliCorp Networks Corporation (UNC). Provided that the necessary approvals and transmission services have been acquired, the energy may be transmitted anywhere in Canada or the United States. The generation and sale of electricity within British Columbia and the United States is subject to government and regulatory approvals. Several buyers and sellers that come together to trade a product are part of a hub. The largest such hub in the Pacific Northwest is called the Mid-Columbia (Mid-C) hub in Washington. The commodity is traded in 25 MW standard blocks. The credit requirements of the purchaser must be satisfied by the generating party. BC Hydro wholesale transmission service can be purchased by any wholesale power marketer or generator to transmit the power to market. It is imperative that scheduling personnel be available at all times. The Western System Coordinating Council (WSCC) insists that an operating reserve of 5 per cent hydro generation and 7 per cent thermal generation to support the electrical system in the face of an emergency be available for the electricity marketed through the hub. Powerex has been successful since 1988 in the marketing of electricity throughout the WSCC. An example was provided to help make the rules a bit easier to comprehend. refs.
In 1990, Britain reorganised its electricity industry to run on competitive lines. The British reforms are widely regarded as successful and the model used provides the basis for reforms of electricity industries worldwide. The main reason for this perception of success is major reductions in the real price of electricity with no reduction in service quality. This paper examines whether the reputation of the British reforms is justified. It concludes that the reputation is not justified and that serious fundamental problems are beginning to emerge. The central question is: have the British reforms resulted in the creation of efficient wholesale and retail markets? On this criterion, the reforms have failed. The wholesale market is dominated by obscure long-term contracts, privileged access to the market and self-dealing within integrated generator/retailers, leaving the spot markets with minimal liquidity and unreliable prices. The failure to develop an efficient wholesale market places the onus on consumers to impose competitive forces on electricity companies by switching regularly. Small consumers will not do this and they are paying too much for their power. For the future, there is a serious risk that the electricity industry will become a weakly regulated oligopoly with a veneer of competition
The core market for natural gas in British Columbia is defined as all natural gas consumers in the residential, institutional, commercial, and industrial sectors not currently purchasing natural gas directly and not exempted from the core market by the British Columbia Utilities Commission (BCUC). The intent of the definition is to include all customers who must be protected by contracts which ensure long-term security of supply and stable prices. Core market customers are excluded from direct natural gas purchase and will be served by distribution utilities. A customer may apply to BCUC to leave the core market; such an application may be approved if it is demonstrated that the customer has adequate long-term natural gas supplies or alternative fuel supplies to protect him from supply interruptions. The non-core market is defined as all large industrial customers who elect to make their own natural gas supply arrangements and who can demonstrate to the BCUC sufficient long-term natural gas supply protection or alternative fuel capability to ensure security of the industry. Non-core market customers have full and open access to the competitive natural gas market. The British Columbia government will not apply its core market policy to other jurisdictions through Energy Removal Certificates
An open access wholesale transmission tariff (WTS) has been in place in British Columbia since 1997, and wholesale electricity can be sold to wholesale purchasers by independent producers located within the province. Customers range from municipalities to British Columbia Hydro (BC Hydro), to Powerex, to UtiliCorp Networks Corporation (UNC). Provided that the necessary approvals and transmission services have been acquired, the energy may be transmitted anywhere in Canada or the United States. The generation and sale of electricity within British Columbia and the United States is subject to government and regulatory approvals. Several buyers and sellers that come together to trade a product are part of a hub. The largest such hub in the Pacific Northwest is called the Mid-Columbia (Mid-C) hub in Washington. The commodity is traded in 25 MW standard blocks. The credit requirements of the purchaser must be satisfied by the generating party. BC Hydro wholesale transmission service can be purchased by any wholesale power marketer or generator to transmit the power to market. It is imperative that scheduling personnel be available at all times. The Western System Coordinating Council (WSCC) insists that an operating reserve of 5 per cent hydro generation and 7 per cent thermal generation to support the electrical system in the face of an emergency be available for the electricity marketed through the hub. Powerex has been successful since 1988 in the marketing of electricity throughout the WSCC. An example was provided to help make the rules a bit easier to comprehend. refs
Cowles, R.V. (Norton Rose, London (UK))
The article discusses the possible consequences of the impending privatisation of British Coal. It seems likely that deep mine operations will probably be divided up geographically but opencast mines may be left in single ownership. Freehold ownership of coal is likely to be transferred to the Crown and British Coal's powers to license small mines and opencast sites are likely to be absorbed into a general licensing system under control of the Department of Energy. Possible difficulties of public share issues are discussed - subsidence, environmental problems and also the uncertainty of the future market for British coal are mentioned. As an alternative, a series of contract sales of groups of mine properties could be made. Issues of common concern to future owners of the coal industry may lead to the creation of a new mineowner's trade association. Constraints in the areas of procurement and coal sales are discusssed briefly. Although a gloomy scenario is presented, it is suggested that some mines could become highly profitable. 1 ref.
Full Text Available During the formation of repetitive ectodermally derived organs such as mammary glands, lateral line and teeth, the tissue primordium iteratively initiates new structures. In the case of successional molar development, new teeth appear sequentially in the posterior region of the jaw from Sox2+ cells in association with the posterior aspect of a pre-existing tooth. The sequence of molar development is well known, however, the epithelial topography involved in the formation of a new tooth is unclear. Here, we have examined the morphology of the molar dental epithelium and its development at different stages in the mouse in vivo and in molar explants. Using regional lineage tracing we show that within the posterior tail of the first molar the primordium for the second and third molar are organized in a row, with the tail remaining in connection with the surface, where a furrow is observed. The morphology and Sox2 expression of the tail retains characteristics reminiscent of the earlier stages of tooth development, such that position along the A-P axes of the tail correlates with different temporal stages. Sox9, a stem/progenitor cell marker in other organs, is expressed mainly in the suprabasal epithelium complementary with Sox2 expression. This Sox2 and Sox9 expressing molar tail contains actively proliferating cells with mitosis following an apico-basal direction. Snail2, a transcription factor implicated in cell migration, is expressed at high levels in the tip of the molar tail while E-cadherin and laminin are decreased. In conclusion, our studies propose a model in which the epithelium of the molar tail can grow by posterior movement of epithelial cells followed by infolding and stratification involving a population of Sox2+/Sox9+ cells.
Joseph, D George
The early history of the Mission to Lepers in India is an interplay between politics, religion, and medicine in the context of British imperialism. The Mission pursued the dual but inseparable goals of evangelization and civilization, advancing not only a religious program but also a political and cultural one. These activities and their consequences were multi-faceted because while the missionaries pursued their religious calling, they also provided medical care to people and in places that the colonial government was unable or unwilling. Within the context of the British imperial program, the work imparted Western social and cultural ideals on the colonial populations they served, inculcated patients with Christian beliefs, and provided medical care to individuals who had been expelled from their own communities. Physical healing was intimately tied to religious salvation, spiritual healing, and the civilizing process.
Kub, I.; Poltsarova, M.; Panchenko, V.E.
Advantages of synchrotron radiation (SR) spectrum of the VEhPP-4 storage ring for X-ray topography and diffractometry are shown. The description of ''Topography and diffractometry'' station in SR dump station of the VEhPP storage ring is presented, peculiarities of X-ray topography method used are discussed. X-ray topographic images of gadolinium-gallium and manganese-germanium garnets taken on the VEhPP SR are given in comparison with conventional images taken using X-ray tubes and SR of the VEhPP-3 storage ring
The TV advertisement which launched the privatisation of British Energy in the summer of 1996 - but just how successful has that privatisation been? And who has benefited - shareholders? The nuclear industry? Our own workforce? Last year, as reported to PIME 97 that the privatisation itself had been successfully completed - following the restructuring of the UK nuclear generation industry, and the creation of British Energy, a new name in the UK - and world energy scene. In simple terms, that privatisation has certainly succeeded - our share price since privatisation has more than doubled, from 2 pounds to well over 4 ponds. Over the last year, it has consistently outperformed the UK electricity sector - particularly over the last winter; it has also out-performed the FR Share Index over the same period, and in December British Energy became one of the UK top 100 listed companies, included in the FTSE 100 having started life at around number 130. This in turn has meant that a number of high quality institutions have taken a second look at British Energy and begun to invest in us as part of a portfolio of FTSE 100 companies. Our success as a private sector company could only be built on the solid foundation of successes as a nuclear utility. Over the five years from 1992 to 1997, our output went up by 64 as Sizewell B came on line and the AGRs achieved their design load factors at last. Safety remains our top priority, and while our profitability increased, so did our safety ratings - accident frequency rates came down by 60%, and collective radiation exposure to our workforce came down 58%. As a result of all this achievement, coupled with reduction in our total workforce, our productivity went up by over 100% - surely proof that nuclear can succeed in a competitive, deregulated electricity market. For future, it has been even more important to sustain that initial success to grow and develop British Energy as a company. The results are there for all to see. In the
Song, J; Zheng, A; Vorburger, T V; Rubert, P
The electro-forming technique is used at National Institute of Standards and Technology (NIST) for the production of standard reference material (SRM) 2461 standard casings to support nationwide ballistics measurement traceability and measurement quality control in the US. In order to ensure that the SRM casings are produced with virtually the same surface topography, it is necessary to test the decay factors of the replication process. Twenty-six replica casings are replicated from the same master casing for the decay factor tests. The NIST topography measurement system is used for measurements and correlations of surface topography. The topography decays are quantified by the cross-correlation function maximum CCF max . Based on the test, it is expected that 256 SRM casings can be replicated from the same master with CCF max values higher than 95%
Rosenblatt, Mark I.
The following study provides new insight into how surface topography dictates directed collective epithelial cell sheet growth through the guidance of individual cell movement. Collective cell behavior of migrating human corneal limbal-epithelial cell sheets were studied on highly biocompatible flat and micro-patterned silk film surfaces. The silk film edge topography guided the migratory direction of individual cells making up the collective epithelial sheet, which resulted in a 75% increase in total culture elongation. This was due to a 3-fold decrease in cell sheet migration rate efficiency for movement perpendicular to the topography edge. Individual cell migration direction is preferred in the parallel approach to the edge topography where localization of cytoskeletal proteins to the topography’s edge region is reduced, which results in the directed growth of the collective epithelial sheet. Findings indicate customized biomaterial surfaces may be created to direct both the migration rate and direction of tissue epithelialization. PMID:23185573
Precision irrigation management is currently accomplished using spatial information about soil properties through soil series maps or electrical conductivity (EC measurements. Crop yield, however, is consistently influenced by local topography, both in rain-fed and irrigated environments. Utilizing ...
Pan Jisheng; Wang Zhenxia; Tao Zhenlan; Zhang Jiping
The sputtering yields of silver have been measured as a function of the fluence of incident Ar + ions (27 keV) using the collector technique and RBS analysis. The irradiated surface was examined by scanning electron microscopy (SEM). It is shown that the sputtering yields of surfaces with topography are enhanced relative to smooth surfaces of silver, but the extent of the enhancement depends on the irradiation dose. The experimental results can be explained assuming that the surface topography and sputtering yield are a function of incident angle. It is obvious that the surface topography is an important factor to influence the sputtering yield. The term ''apparent sputtering yield'' has specifically been used when referring to the experimental sputtering yield of a surface with topography, to emphasize the difference with a smooth surface. (orig.)
Mandibular molar crown-topography, a biological predisposing factor to development of caries – a post-mortem analysis of 2500 extracted lower permanent molars at the dental centre, University of Benin teaching hospital.
Yeo, Joon Hyung; Moon, Nam Ju; Lee, Jeong Kyu
To introduce a new convenient and accurate method to measure the angle kappa using ultrasound biomicroscopy (UBM) and corneal topography. Data from 42 eyes (13 males and 29 females) were analyzed in this study. The angle kappa was measured using Orbscan II and calculated with UBM and corneal topography. The angle kappa of the dominant eye was compared with measurements by Orbscan II. The mean patient age was 36.4 ± 13.8 years. The average angle kappa measured by Orbscan II was 3.98° ± 1.12°, while the average angle kappa calculated with UBM and corneal topography was 3.19° ± 1.15°. The difference in angle kappa measured by the two methods was statistically significant (p topography to calculate the angle kappa. This method is convenient to use and allows for measurement of the angle kappa without an expensive device. © 2017 The Korean Ophthalmological Society
Onesto, V.; Cancedda, L.; Coluccio, M. L.; Nanni, M.; Pesce, M.; Malara, N.; Cesarelli, M.; Di Fabrizio, Enzo M.; Amato, F.; Gentile, F.
Neural cells are the smallest building blocks of the central and peripheral nervous systems. Information in neural networks and cell-substrate interactions have been heretofore studied separately. Understanding whether surface nano-topography can
Liu Taoan; Zhou Xinghuo; Lv Junwen
It is successful for how to reform and utilized complicated topography in the design of general plan and transport for technological reformation of a uranium mill. The unfavorable factors of complicated topography are turned into favorable ones. The general plan is designed compactly and the land is economized. The transport is designed simply and directly. the leaching liquid flows by gravity so that the power is economical
Burov, Evgueni; Gerya, Taras
The role of mantle-lithosphere interactions in shaping surface topography has long been debated. In general, it is supposed that mantle plumes and vertical mantle flows result in axisymmetric, long-wavelength topography, which strongly differs from the generally asymmetric short-wavelength topography created by intraplate tectonic forces. However, identification of mantle-induced topography is difficult, especially in the continents. It can be argued therefore that complex brittle-ductile rheology and stratification of the continental lithosphere result in short-wavelength modulation and localization of deformation induced by mantle flow. This deformation should also be affected by far-field stresses and, hence, interplay with the 'tectonic' topography (for example, in the 'active/passive' rifting scenario). Testing these ideas requires fully coupled three-dimensional numerical modelling of mantle-lithosphere interactions, which so far has not been possible owing to the conceptual and technical limitations of earlier approaches. Here we present new, ultra-high-resolution, three-dimensional numerical experiments on topography over mantle plumes, incorporating a weakly pre-stressed (ultra-slow spreading), rheologically realistic lithosphere. The results show complex surface evolution, which is very different from the smooth, radially symmetric patterns usually assumed as the canonical surface signature of mantle upwellings. In particular, the topography exhibits strongly asymmetric, small-scale, three-dimensional features, which include narrow and wide rifts, flexural flank uplifts and fault structures. This suggests a dominant role for continental rheological structure and intra-plate stresses in controlling dynamic topography, mantle-lithosphere interactions, and continental break-up processes above mantle plumes.
Ding, X; Da, B; Gong, J B; Ding, Z J; Mao, S F
A Monte Carlo simulation, taking into account of the detailed surface roughness of a realistic solid sample, has been performed to study the surface topography influence on elastic peak intensity. To describe quantitatively the surface topography effect, here we introduce surface roughness parameter (SRP) according to the ratio of elastic peak intensities between a rough surface and an ideal planar surface. Simulation results for Al sample have shown that SRP varies with surface roughness particularly at large incidence/emission angles
Whitton, J.L.; Carter, G.
The results of a detailed, systematic investigation of the development of energetic argon ion bombardment induced surface features on polycrystal and single crystal copper are presented. It is shown that the crystal structure itself is the dominant factor deciding the final form of surface topography. The earlier proposed ''necessary conditions'' for development of surface topography, viz. surface impurity, asperities, growth, surface migration and redeposition are shown to be unimportant under the clean conditions of the experiments. (Auth.)
Kanellopoulos, Anastasios John
To evaluate the safety, efficacy, and contralateral eye comparison of topography-guided myopic LASIK with two different refraction treatment strategies. Private clinical ophthalmology practice. A total of 100 eyes (50 patients) in consecutive cases of myopic topography-guided LASIK procedures with the same refractive platform (FS200 femtosecond and EX500 excimer lasers) were randomized for treatment as follows: one eye with the standard clinical refraction (group A) and the contralateral eye with the topographic astigmatic power and axis (topography-modified treatment refraction; group B). All cases were evaluated pre- and post-operatively for the following parameters: refractive error, best corrected distance visual acuity (CDVA), uncorrected distance visual acuity (UDVA), topography (Placido-disk based) and tomography (Scheimpflug-image based), wavefront analysis, pupillometry, and contrast sensitivity. Follow-up visits were conducted for at least 12 months. Mean refractive error was -5.5 D of myopia and -1.75 D of astigmatism. In group A versus group B, respectively, the average UDVA improved from 20/200 to 20/20 versus 20/16; post-operative CDVA was 20/20 and 20/13.5; 1 line of vision gained was 27.8% and 55.6%; and 2 lines of vision gained was 5.6% and 11.1%. In group A, 27.8% of eyes had over -0.50 diopters of residual refractive astigmatism, in comparison to 11.7% in group B ( P Topography-modified refraction (TMR): topographic adjustment of the amount and axis of astigmatism treated, when different from the clinical refraction, may offer superior outcomes in topography-guided myopic LASIK. These findings may change the current clinical paradigm of the optimal subjective refraction utilized in laser vision correction.
Full Text Available Aphasia is a common manifestation of stroke and evaluation of relationships of aphasia and brain topography could lead to better understanding of cognitive neurophysiology.Consecutive 100 stroke patients with aphasia admitted in Valie Asr hospital, Khorasan in 2003 enrulled in this prospective study. Diagnosis of stroke and aphasia was made by a neurolosist and topography of involved cerebrovascular territories confirmed by topographic maps of brain in CT scan. Global, Broca and Wernicke subtypes of aphasia constituted 52%, 40% and 6% of the cases respectively. Based on the usual nourishment of Broca and Wernicke areas by anterior and posterior cortical branches of the middle cerebral artery, 79% of Global, 47% of Broca and 50% of Wernicke aphasias had a compatible infarct topography. Other cases had no congruent infarct topography with involved linguistic area of their brain. Specific cerebrovascular topography for subtypes of aphasia in stroke patients was not found. The effects of cerebrovascular lesions on linguistic functions are not predictable by their topography in CT scan.
Full Text Available The culturally cognitive perception of Belgrade’s topographies is considered through its deployment, symbolic use and narrative foundation. As the explanatory material-one football-media incident, the use of certain areas of the city in a spectacleceremonial manner, knowledge and lore of certain elements of the Belgrade topographies and the organization of «the football Belgrade»-were considered. The attitude is taken that the topography of a city is a multifaceted cultural constituent, whose structure of particular meaning, as a part of cultural communication, is determined by the very fact it is an urban space. Physical aspects of spatial-ness are reduced to relationism, i.e. it has a meaning for the cultural communication only when the elements of urban topographies are brought into correlation. Other characteristics of physical spatial-ness are irrelevant for such communication. Meaning relations in which elements of urban topographies exist are formed on the very fact of them being urban, that is, the afore mentioned denotation that is ascribed to space, stems from those cultural features and artifacts that are associated in a given milieu with certain concrete elements of urban topographies.
Bills, Bruce G.; Frey, Herbert V.; Kiefer, Walter S.; Nerem, R. Steven; Zuber, Maria T.
New spherical harmonic models of the gravity and topography of Mars place important constraints on the structure and dynamics of the interior. The gravity and topography models are significantly phase coherent for harmonic degrees n less than 30 (wavelengths greater than 700 km). Loss of coherence below that wavelength is presumably due to inadequacies of the models, rather than a change in behavior of the planet. The gravity/topography admittance reveals two very different spectral domains: for n greater than 4, a simple Airy compensation model, with mean depth of 100 km, faithfully represents the observed pattern; for degrees 2 and 3, the effective compensation depths are 1400 and 550 km, respectively, strongly arguing for dynamic compensation at those wavelengths. The gravity model has been derived from a reanalysis of the tracking data for Mariner 9 and the Viking Orbiters, The topography model was derived by harmonic analysis of the USGS digital elevation model of Mars. Before comparing gravity and topography for internal structure inferences, we must ensure that both are consistently referenced to a hydrostatic datum. For the gravity, this involves removal of hydrostatic components of the even degree zonal coefficients. For the topography, it involves adding the degree 4 equipotential reference surface, to get spherically referenced values, and then subtracting the full degree 50 equipotential. Variance spectra and phase coherence of orthometric heights and gravity anomalies are addressed.
The next time you flip on a light switch, there s a chance that you could be benefitting from data originally acquired during the Space Shuttle Program. An effort spearheaded by Jet Propulsion Laboratory (JPL) and the National Geospatial-Intelligence Agency (NGA) in 2000 put together the first near-global elevation map of the Earth ever assembled, which has found use in everything from 3D terrain maps to models that inform solar power production. For the project, called the Shuttle Radar Topography Mission (SRTM), engineers at JPL designed a 60-meter mast that was fitted onto Shuttle Endeavour. Once deployed in space, an antenna attached to the end of the mast worked in combination with another antenna on the shuttle to simultaneously collect data from two perspectives. Just as having two eyes makes depth perception possible, the SRTM data sets could be combined to form an accurate picture of the Earth s surface elevations, the first hight-detail, near-global elevation map ever assembled. What made SRTM unique was not just its surface mapping capabilities but the completeness of the data it acquired. Over the course of 11 days, the shuttle orbited the Earth nearly 180 times, covering everything between the 60deg north and 54deg south latitudes, or roughly 80 percent of the world s total landmass. Of that targeted land area, 95 percent was mapped at least twice, and 24 percent was mapped at least four times. Following several years of processing, NASA released the data to the public in partnership with NGA. Robert Crippen, a member of the SRTM science team, says that the data have proven useful in a variety of fields. "Satellites have produced vast amounts of remote sensing data, which over the years have been mostly two-dimensional. But the Earth s surface is three-dimensional. Detailed topographic data give us the means to visualize and analyze remote sensing data in their natural three-dimensional structure, facilitating a greater understanding of the features
Brocklehurst, Simon H.
This thesis examines the response of alpine landscapes to the onset of glaciation. The basic approach is to compare fluvial and glacial laudscapes, since it is the change from the former to the latter that accompanies climatic cooling. This allows a detailed evaluation of hypotheses relating climate change to tectonic processes in glaciated mountain belts. Fieldwork was carried out in the eastern Sierra Nevada, California, and the Sangre de Cristo Range, Colorado, alongside digital elevation model analyses in the western US, the Southern Alps of New Zealand, and the Himalaya of northwestern Pakistan. hypothesis is overstated in its appeal to glacial erosion as a major source of relief production and subsequent peak uplift. Glaciers in the eastern Sierra Nevada and the western Sangre de Cristos have redistributed relief, but have produced only modest relief by enlarging drainage basins at the expense of low-relief topography. Glaciers have lowered valley floors and ridgelines by similar amounts, limiting the amount of "missing mass' that can be generated, and causing a decrease in drainage basin relief. The principal response of glaciated landscapes to rapid rock uplift is the development of towering cirque headwalls. This represents considerable relief production, but is not caused by glacial erosion alone. Large valley glaciers can maintain their low gradient regardless of uplift rate, which supports the "glacial buzzsaw" hypothesis. However, the inability of glaciers to erode steep hillslopes as rapidly can cause mean elevations to rise. Cosmogenic isotope dating is used to show that (i) where plucking is active, the last major glaciation removed sufficient material to reset the cosmogenic clock; and (ii) former glacial valley floors now stranded near the crest of the Sierra Nevada are at varying stages of abandonment, suggesting a cycle of drainage reorganiszation and relief inversion due to glacial erosion similar to that observed in river networks. Glaciated
Smith, P.G.; Doll, R.
The mortality of men who joined a British radiological society between 1897 and 1954 has been compared with that of (i) all men in England and Wales, (ii) men in social class 1, and (iii) male medical practitioners. Radiologists who entered the profession before 1921 suffered a death rate from cancer 75% higher than that of medical practitioners. Among these men there was a statistically significant excess of deaths from cancers of the pancreas (6 against 1.9 expected), lung (8 against 3.7), and skin (6 against 0.8), and from leukaemia (4 against 0.7). There were 72 deaths from cancer among men who entered the study after 1920 and 68.6 deaths were expected, based upon rates among medical practitioners. For no individual cancer site did the observed number of deaths exceed the expected number. There was some evidence, however, that the ratio of observed to expected cancer increased with the duration of time that men were included in the study. Among those followed for more than 30 years there were 30 deaths against 22.1 expected. It is not possible to make a close estimate of the dose of radiation received by the men in this study, but those who entered between 1920 and 1945 could have received an accumulated whole-body dose of the order of 1-5 Gy(100 to 500 rad). For all non-cancer causes of death combined, the death rate among radiologists is lower than that among all men in England and Wales, men in social class 1, and male medical practitioners. The data offer no support for the concept of a non-specific aging effect of radiation. (author)
Bynum, W F
British India was an important site of much important malaria research. Although Ronald Ross left India in 1899, a number of malariologists continued the task of evaluating the incidence and distribution of malaria in the country. Implementing practical solutions was hampered by formidable social and economic problems. This paper examines the Indian situation in the late 1920s, through a retrospective selection of writings chosen by J.A. Sinton for reproduction in an early issue of 'The records of the malaria survey of India', and the analysis of the Indian malaria situation through a visit of the League of Nations Malaria Commission in 1929.
Kenneth O. MORGAN
Full Text Available The famous detective, Sherlock Holmes, once solved a case by referring to “the dog that did not bark.” In the past 250 years of British history, republicanism is another dog that did not bark. This is particularly true of supposedly our most radical major political party, the Labour Party. Over the monarchy, as over constitutional matters generally, Labour’s instincts have been conservative. Even after 1997, when the party, led by Lord Irvine, has indeed embarked upon major constitutional ref...
This article traces the history of black British jazz across five moments from 1920 to the present. It also makes a theoretical argument about the nature of race and its connection both with music and belonging to the nation. Race is indeed a musical-discursive construction, as has been argued in the literature about culture and ethnicity over the last thirty years or so. But it is a social structure too, and the contradictions that result are key to understanding the race-music relationship.
The decision to abolish British National Oil Corporation has greater significance than any commentator, so far, has cared to admit. Mr. Mabro says the Government has done much more than get rid of an institution it had previously weakened and emasculated; in effect, it had abdicated its responsibilities for the pricing of North Sea oil. He further observes that these moves may be consistent with the tenets of a simplistic free-market ideology: they betray, however, a lack of understanding of the economics of oil, and of the UK economic interest in oil.
NSGIC State | GIS Inventory — Bedrock topography was converted from the original published map, Indiana Geological Survey Miscellaneous Map 36. The contours define the elevation/topography of the...
Peixoto, Rafael Marcos Tort
Full Text Available The purpose of this paper is to analyse a chart published by the British newspaper The Telegraphabout the most common misunderstandings foreigners face while making use of English as their second language. L2 speakers are said to take every word at face value and therefore making some pragmatic mistakes. Sometimes there can be another meaning behind the spoken words, like it is unsaid for a reason. The pragmatics theories of irony in Attardo (1999 shed light on these translating and intercultural awareness issues by explaining what is behind the misunderstanding which is the secret ofthe so famous British politeness. Some considerations will be made upon the chart so as to understand it, such as an analysis of irony and native speakers’ perspectives on it. In addition to that, we will take into account the opinion of some native speakers of English to unveil some details and clarify how meaningful some sentences may be and if the researched chart is actually accurate
Full Text Available The subjects of Owen Hatherley’s A Guide to the New Ruins of Great Britain are architecture and urban development. The book addresses also some broader cultural, political and economic references, as well as personal anecdotes and memories. It includes many encounters with the remnants of the British welfare state.As an extension to his blog postings and a sequel of sorts to his previous Militant Modernism, Hatherley’s antagonist here is the semi-official architecture of New Labour, which he terms ‘pseudomodernism’: an unimaginative, inferior, and, in its own specific way, also tacky architecture of white stucco, steel and glass. He attacks the Faustian bargain of Richard Rogers and his allies with neoliberalism, a pact that produces a modernism devoid of social content, reflected by the unimaginative, speculation-driven architectural design. While Hatherley produces the promised indictment of recent British architecture, the book is, at the end of the day, primarily a eulogy to the disappearing postwar architecture he so evidently loves.
Kelly, Morgan; Mokyr, Joel; Ó Gráda, Cormac
Many explanations have been offered for the British Industrial Revolution. This article points to the importance of human capital (broadly defined) and the quality of the British labor force on the eve of the Industrial Revolution. It shows that in terms of both physical quality and mechanical skills, British workers around 1750 were at a much higher level than their continental counterparts. As a result, new inventions—no matter where they originated—were adopted earlier, faster, and on a la...
Buonanno, Giovanna; Sams, Victoria; Schlote, Christiane
In the context of British Asian theatre and the search for a diasporic theatre aesthetics the practice of adaptation has emerged as a recurring feature. Over the last decades, British Asian theatre has sought to create a language of the theatre that can reflect the cultural heritage of Asians in Britain; this search has taken different directions testified also by the plurality of voices that today make up British Asian theatre and has responded to the need to challenge the conceptual binary ...
Sadewasser, S; Leendertz, C; Streicher, F; Lux-Steiner, M Ch
Long-range electrostatic forces govern the imaging mechanism in electrostatic force microscopy as well as in Kelvin probe force microscopy. To improve the analysis of such images, simulations of the electrostatic field distribution have been performed in the past using a flat surface and a cone-shaped tip. However, the electrostatic field distribution between a tip and a sample depends strongly on the surface topography, which has been neglected in previous studies. It is therefore of general importance to study the influence of sample topography features on Kelvin probe force microscopy images, which we address here by performing finite element simulations. We show how the surface potential measurement is influenced by surface steps and surface grooves, considering potential variations in the form of a potential peak and a potential step. The influence of the topography on the measurement of the surface potential is found to be rather small compared to a typical experimental resolution. Surprisingly, in the case of a coinciding topography and potential step an improvement of the potential profile due to the inclusion of the topography is observed. Finally, based on the obtained results, suggestions for the realization of KPFM measurement are given.
Koshel, Konstantin V; Ryzhov, Evgeny A; Zyryanov, Valery N
This work deals with a model of a topographically trapped vortex appearing over isolated topography in a geophysical flow. The main feature of the study is that we pay special attention to the vertical structure of a topographically trapped vortex. The model considered allows one to study the vertical motion which is known not to be negligible in many cases. Given topography in the form of an isolated cylinder, and radial symmetry and stationarity of a uniform flow, in the linear approximation, we formulate a boundary value problem that determines all the components of the velocity field through a six-order differential operator, and nonincreasing boundary conditions at the center of the topography, and at infinity. The eigenvalues of the boundary value problem correspond to bifurcation points, in which the flow becomes unstable, hence non-negligible vertical velocities occur. We formulate a condition for the boundary value problem to have a discrete spectrum of these bifurcation points, and hence to be solvable. Conducting a series of test calculations, we show that the resulting vortex lies in the vicinity of topography, and can attain the distance up to half of the topography characteristic radius. (papers)
Billis, Evdokia; McCarthy, Christopher J; Gliatis, John; Matzaroglou, Charalampos; Oldham, Jacqueline A
To explore current diagnostic practice and attitudes of Greek and United Kingdom physiotherapists (PTs) on assessing low back pain (LBP) patients. Three focus groups were undertaken, followed by a structured questionnaire-type survey comprising 23 health professionals and a random stratified sample of 150 PTs, respectively. Twenty-nine themes relating to LBP diagnostic practice emerged. These were then given to 30 British PTs assessing their level of agreement with their Greek counterparts. Analysis was performed by percentage agreements and χ (2) tests. The survey was divided into three subsections; PTs' attitudes on LBP assessment, patients' attitudes and diagnostic/healthcare issues, each constituting 14, 7 and 8 statements, respectively. Over half of the statements fell within the 30%-80% agreement between Greece and United Kingdom whereas, 5 statements reported low ( 90%) PT percentage agreement. Similarities across British and Greek PTs were detected in history taking methods and in the way PTs feel patients perceive physiotherapy practice whereas, re-assessment was undertaken less frequently in Greece. Diagnosis according to 91% of the Greek PTs is considered a "privilege" which is exclusive for doctors in Greece (only 17% British PTs agreed) and is accompanied with a great overuse of medical investigations. Forty percent of Greek PTs (compared to 0% of British) consider themselves as "executers", being unable to interfere with treatment plan, possibly implying lack of autonomy. Although similarities on history taking methods and on patients' attitudes were detected across both groups, gross differences were found in re-assessment procedures and diagnostic issues between Greek and British physiotherapists, highlighting differences in service delivery and professional autonomy.
Sadatsafavi, Mohsen; Lynd, Larry; Marra, Carlo; Carleton, Bruce; Tan, Wan C; Sullivan, Sean; FitzGerald, J Mark
BACKGROUND: A better understanding of health care costs associated with asthma would enable the estimation of the economic burden of this increasingly common disease. OBJECTIVE: To determine the direct medical costs of asthma-related health care in British Columbia (BC). METHODS: Administrative health care data from the BC Linked Health Database and PharmaNet database from 1996 to 2000 were analyzed for BC residents five to 55 years of age, including the billing information for physician visits, drug dispensations and hospital discharge records. A unit cost was assigned to physician/emergency department visits, and government reimbursement fees for prescribed medications were applied. The case mix method was used to calculate hospitalization costs. All costs were reported in inflation-adjusted 2006 Canadian dollars. RESULTS: Asthma resulted in $41,858,610 in annual health care-related costs during the study period ($331 per patient-year). The major cost component was medications, which accounted for 63.9% of total costs, followed by physician visits (18.3%) and hospitalization (17.8%). When broader definitions of asthma-related hospitalizations and physician visits were used, total costs increased to $56,114,574 annually ($444 per patient-year). There was a statistically significant decrease in the annual per patient cost of hospitalizations (P<0.01) over the study period. Asthma was poorly controlled in 63.5% of patients, with this group being responsible for 94% of asthma-related resource use. CONCLUSION: The economic burden of asthma is significant in BC, with the majority of the cost attributed to poor asthma control. Policy makers should investigate the reason for lack of proper asthma control and adjust their policies accordingly to improve asthma management. PMID:20422063
Norman, Armando Henrique; Russell, Andrew J; Macnaughton, Jane
This article explores some effects of the British payment for performance model on general practitioners' principles and practice, which may contribute to issues related to financial incentive modalities and quality of primary healthcare services in low and middle-income countries. Aiming to investigate what general practitioners have to say about the effect of the British payment for performance on their professional ethos we carried out semi-structured interviews with 13 general practitioner educators and leaders working in academic medicine across the UK. The results show a shift towards a more biomedical practice model and fragmented care with nurse practitioners and other health care staff focused more on specific disease conditions. There has also been an increased medicalisation of the patient experience both through labelling and the tendency to prescribe medications rather than non-pharmacological interventions. Thus, the British payment for performance has gradually strengthened a scientific-bureaucratic model of medical practice which has had profound effects on the way family medicine is practiced in the UK.
Hackett, Troy A; Rinaldi Barkat, Tania; O'Brien, Barbara M J
The mouse sensory neocortex is reported to lack several hallmark features of topographic organization such as ocular dominance and orientation columns in primary visual cortex or fine-scale tonotopy in primary auditory cortex (AI). Here, we re-examined the question of auditory functional topography...... the tonotopic axis in the slice produced an orderly shift of voltage-sensitive dye (VSD) signals along the AI tonotopic axis, demonstrating topography in the mouse thalamocortical circuit that is preserved in the slice. However, compared with BF maps of neuronal spiking activity, the topographic order...... of subthreshold VSD maps was reduced in layer IV and even further degraded in layer II/III. Therefore, the precision of AI topography varies according to the source and layer of the mapping signal. Our findings further bridge the gap between in vivo and in vitro approaches for the detailed cellular study...
Maj, J.; Goetze, K.; Macrander, A.; Zhong, Y.; Huang, X.; Maj, L.
The Topography X-ray Laboratory of the Advanced Photon Source (APS) at Argonne National Laboratory operates as a collaborative effort with APS users to produce high performance crystals for APS X-ray beamline experiments. For many years the topography laboratory has worked closely with an on-site optics shop to help ensure the production of crystals with the highest quality, most stress-free surface finish possible. It has been instrumental in evaluating and refining methods used to produce high quality crystals. Topographical analysis has shown to be an effective method to quantify and determine the distribution of stresses, to help identify methods that would mitigate the stresses and improve the Rocking curve, and to create CCD images of the crystal. This paper describes the topography process and offers methods for reducing crystal stresses in order to substantially improve the crystal optics.
Arnold, Markus; Haas, Sven; Schwenzer, Falk; Schwenzer, Gunther; Reuter, Danny; Geßner, Thomas; Voigt, Anja; Gruetzner, Gabi
In microsystem technology, the lithographical processing of substrates with a topography is very important. Interconnecting lines, which are routed over sloped topography sidewalls from the top of the protecting wafer to the contact pads of the device wafer, are one example of patterning over a topography. For structuring such circuit paths, a photolithography process, and therefore a process for homogeneous photoresist coating, is required. The most flexible and advantageous way of depositing a homogeneous photoresist film over structures with high topography steps is spray-coating. As a pattern transfer process for circuit paths in cavities, the lift-off process is widely used. A negative resist, like ma-N (MRT) or AZnLOF (AZ) is favoured for lift-off processes due to the existing negative angle of the sidewalls. Only a few sprayable negative photoresists are commercially available. In this paper, the development of a novel negative resist spray-coating based on a commercially available single-layer lift-off resist for spin-coating, especially for the patterning of structures inside the cavity and on the cavity wall, is presented. A variety of parameters influences the spray-coating process, and therefore the patterning results. Besides the spray-coating tool and the parameters, the composition of the resist solution itself also influences the coating results. For homogeneous resist coverage over the topography of the substrate, different solvent combinations for diluting the resist solution, different chuck temperatures during the coating process, and also the softbake conditions, are all investigated. The solvent formulations and the process conditions are optimized with respect to the homogeneity of the resist coverage on the top edge of the cavities. Finally, the developed spray-coating process, the resist material and the process stability are demonstrated by the following applications: (i) lift-off, (ii) electroplating, (iii) the wet and (iv) the dry
Adams, D. D.; Boll, J.; Wagenbrenner, N. S.
The effects of spatial-temporal variation of climatic conditions on evaporation in micro-climates are not well defined. Current spatially-based remote sensing and modeling for evaporation is limited for high resolutions and complex topographies. We investigated the effect of topography-driven micro-climatology on evaporation supported by field measurements and modeling. Fourteen anemometers and thermometers were installed in intersecting transects over the complex topography of the Cook Agronomy Farm, Pullman, WA. WindNinja was used to create 2-D vector maps based on recorded observations for wind. Spatial analysis of vector maps using ArcGIS was performed for analysis of wind patterns and variation. Based on field measurements, wind speed and direction show consequential variability based on hill-slope location in this complex topography. Wind speed and wind direction varied up to threefold and more than 45 degrees, respectively for a given time interval. The use of existing wind models enables prediction of wind variability over the landscape and subsequently topography-driven evaporation patterns relative to wind. The magnitude of the spatial-temporal variability of wind therefore resulted in variable evaporation rates over the landscape. These variations may contribute to uneven crop development patterns observed during the late growth stages of the agricultural crops at the study location. Use of hill-slope location indexes and appropriate methods for estimating actual evaporation support development of methodologies to better define topography-driven heterogeneity in evaporation. The cumulative effects of spatially-variable climatic factors on evaporation are important to quantify the localized water balance and inform precision farming practices.
Dahl, O.C.; Forsberg, René
In this paper two different methods of how to handle topography in geoid determination is investigated. First method employs the Residual Terrain Model (RTM) remove-restore technique and yields the quasigeoid, whereas the second method is the classical Helmert condensation method, yielding...... the topography was represented by either a detailed (100 m) or a coarse (1000 m) digital terrain model. The inclusion of bathymetry in the terrain model was also investigated. Even if two different methods were used, they produced almost identical results at the 5 cm level in the mountains, but small systematic...
Yu, Anthony W.; Krainak, Michael A.; Harding, David J.; Abshire, James B.; Sun, Xiaoli; Cavanaugh, John; Valett, Susan; Ramos-Izquierdo, Luis
In 2007, the National Research Council (NRC) completed its first decadal survey for Earth science at the request of NASA, NOAA, and USGS. The Lidar Surface Topography (LIST) mission is one of fifteen missions recommended by NRC, whose primary objectives are to map global topography and vegetation structure at 5 m spatial resolution, and to acquire global coverage with a few years. NASA Goddard conducted an initial mission concept study for the LIST mission 2007, and developed the initial measurement requirements for the mission.
Vorburger, T V; Song, J; Petraco, N
The application of surface topography measurement methods to the field of firearm and toolmark analysis is fairly new. The field has been boosted by the development of a number of competing optical methods, which has improved the speed and accuracy of surface topography acquisitions. We describe here some of these measurement methods as well as several analytical methods for assessing similarities and differences among pairs of surfaces. We also provide a few examples of research results to identify cartridge cases originating from the same firearm or tool marks produced by the same tool. Physical standards and issues of traceability are also discussed. PMID:27182440
Yu, Anthony W.; Krainak, Michael A.; Abshire, James B.; Cavanaugh, John; Valett, Susan; Ramos-Izquierdo, Luis
In 2007, the National Research Council (NRC) completed its first decadal survey for Earth science at the request of NASA, NOAA, and USGS. The Lidar Surface Topography (LIST) mission is one of fifteen missions recommended by NRC, whose primary objectives are to map global topography and vegetation structure at 5 m spatial resolution, and to acquire global surface height mapping within a few years. NASA Goddard conducted an initial mission concept study for the LIST mission in 2007, and developed the initial measurement requirements for the mission.
Florinsky, I.V.; Kulagina, T.B.; Meshalkina, J.L.
The evaluation of the influence of topography on landscape radiation temperature distribution is carried out by statistical processing of digital models of elevation, gradient, aspect, horizontal, vertical and mean land surface curvatures and the infrared thermal scene generated by the Thermovision 880 system. Significant linear correlation coefficients between the landscape radiation temperature and elevation, slope, aspect, vertical and mean landsurface curvatures are determined, being —0-57, 0 38, 0-26, 015, 013, respectively. The equation of the topography influence on the distribution of the landscape radiation temperature is defined. (author)
Konopliv, A. S.; Borderies, N. J.; Chodas, P. W.; Christensen, E. J.; Sjogren, W. L.; Williams, B. G.; Balmino, G.; Barriot, J. P.
We have combined the most recent Pioneer Venus Orbiter (PVO) and Magellan (MGN) data with the earlier 1978-1982 PVO data set to obtain a new 60th degree and order spherical harmonic gravity model and a 120th degree and order spherical harmonic topography model. Free-air gravity maps are shown over regions where the most marked improvement has been obtained (Ishtar-Terra, Alpha, Bell and Artemis). Gravity versus topography relationships are presented as correlations per degree and axes orientation.
Sjogren, W. L.; Bills, B. G.; Birkeland, P. W.; Esposito, P. B.; Konopliv, A. R.; Mottinger, N. A.; Ritke, S. J.; Phillips, R. J.
This report provides a summary of the high-resolution gravity data obtained from the Pioneer Venus Orbiter radio tracking data. Gravity maps, covering a 70 deg latitude band through 360 deg of longitude, are displayed as line-of-sight and vertical gravity. Topography converted to gravity and Bouguer gravity maps are also shown in both systems. Topography to gravity ratios are made over several regions of the planet. There are markedly different ratios for the Aphrodite area as compared to the Beta and Atla areas.
the effect of topography on cells has received much attention understanding how important this is for the rational design of bio-interfaces. Nevertheless, there is still a limited understanding of the effect of topography on cells making it impossible to tailor a biomaterial with specific cellular activity......Cells continuously make decisions on what proteins to express, and when to divide, differentiate and commit suicide, through a complex network of intracellular processes. The signals that determine the cellular processes reside within the extracellular matrix. They involve soluble signaling...
This article explores meteorological interest and experimentation in the early history of the Straits Settlements. It centres on the establishment of an observatory in 1840s Singapore and examines the channels that linked the observatory to a global community of scientists, colonial officers and a reading public. It will argue that, although the value of overseas meteorological investigation was recognized by the British government, investment was piecemeal and progress in the field often relied on the commitment and enthusiasm of individuals. In the Straits Settlements, as elsewhere, these individuals were drawn from military or medical backgrounds, rather than trained as dedicated scientists. Despite this, meteorology was increasingly recognized as of fundamental importance to imperial interests. Thus this article connects meteorology with the history of science and empire more fully and examines how research undertaken in British dependencies is revealing of the operation of transnational networks in the exchange of scientific knowledge.
Roper, D A [British Nuclear Fuels Ltd., Risley
The state of the corporate planning art in British Nuclear Fuels Ltd. was described by N.R.Geary (Long Range Planning, September (1973)) just 2 years after Company formation. This article discusses more recent planning developments over the period to date during which the Company adopted a Divisionalized structure (from October 1974) and has been required to submit an annual Company plan to the Department of Energy (from November 1975). Background information on the origin and nature of the BNFL and its business, and the particular features of the Company which reflect into the nature and method of its planning were given in the 1973 article and only a brief introductory updating of the Company position is included here. Subsequently the features and problems of BNFL's operating and development planning system are described. Finally, messages arising from BNFL's planning experience to date which may be of general application and therefore of value to other practitioners of planning are listed.
Adagra, Carl; Spielman, Derek; Adagra, Angela; Foster, Darren J
Metaphyseal osteopathy, otherwise known as hypertrophic osteodystrophy, is a disease that causes pyrexia and lethargy accompanied by pain in the thoracic and pelvic limbs of rapidly growing large-breed dogs. While metaphyseal osteopathy has been descibed in association with slipped capital femoral epiphysis in cats, it has not previously been reported as a cause of limb pain and pyrexia in this species. A 7-month-old British Shorthair cat presented with a 1 month history of pyrexia, lethargy and pain in all limbs. Investigation included radiographs of the limbs and chest, abdominal ultrasound, serum biochemical analysis, haematology, bone biopsy, joint fluid aspiration and cytology. Findings were consistent with a diagnosis of metaphyseal osteopathy. The cat's clinical signs resolved following the administration of prednisolone. Symptoms recurred 1 month after the cessation of prednisolone therapy, but resolved when administration was resumed. © ISFM and AAFP 2014.
Cruttenden, M G [British Coal Corporation, London (United Kingdom)
This paper attempts to describe British Coal's (BCC) present position in a rapidly changing UK Energy Market where competition, with imported coal and with other fuels, particularly natural gas is likely to continue to increase. As a relatively high cost coal producer by world standards BCC, while continuing its efforts to improve productivity and lower costs, must work to enhance the value of its product in the market place both by improving quality to more closely match customers individual needs and by offering supporting services which ensure overall customer satisfaction. The paper explores each market sector and describes the steps which the Corporation is taking to improve its competitive position in each market with particular reference to quality standards and supporting services. Finally it attempts to forecast some possible new developments for the future. 3 tabs.
Net metering was described as being the reverse registration of an electricity customer's revenue meter when interconnected with a utility's grid. It is a provincial policy designed to encourage small-distributed renewable power generation such as micro-hydro, solar energy, fuel cells, and larger-scale wind energy. It was noted that interconnection standards for small generation is an important issue that must be addressed. The British Columbia Utilities Commission has asked BC Hydro to prepare a report on the merits of net metering in order to support consultations on a potential net metering tariff application by the utility. This report provides information on net metering with reference to experience in other jurisdictions with net metering, and the possible costs and benefits associated with net metering from both a utility and consumer perspective. Some of the barriers and policy considerations for successful implementation of net metering were also discussed. refs., tabs., figs
Spilsbury, Kate L; Fudge, Barry W; Ingham, Stephen A; Faulkner, Steve H; Nimmo, Myra A
The aim of the study was to explore pre-competition training practices of elite endurance runners. Training details from elite British middle distance (MD; 800 m and 1500 m), long distance (LD; 3000 m steeplechase to 10,000 m) and marathon (MAR) runners were collected by survey for 7 days in a regular training (RT) phase and throughout a pre-competition taper. Taper duration was [median (interquartile range)] 6 (3) days in MD, 6 (1) days in LD and 14 (8) days in MAR runners. Continuous running volume was reduced to 70 (16)%, 71 (24)% and 53 (12)% of regular levels in MD, LD and MAR runners, respectively (P training (MD; 53 (45)%, LD; 67 (23)%, MAR; 64 (34)%, P training intensity was above race speed in LD and MAR runners (112 (27)% and 114 (3)%, respectively, P training undertaken prior to the taper in elite endurance runners is predictive of the tapering strategy implemented before competition.
British Columbia (BC) possesses significant wind energy resources, and many wind energy projects are currently in the planning phase or are already under construction. Wind power policies in the province have been designed to ensure the secure and orderly development of the wind power industry. Policies in the province include a 10-year exemption from participation rents for new projects as well as a policy that has established the maximum permissible noise levels for wind farms located near residential properties. BC's wind power development plan forms part of the province's aim to become electricity self-sufficient by 2016 while ensuring that clean or renewable energy generation accounts for at least 90 per cent of total generation. This guide provided an outline of the province's wind energy sector, and provided a listing of selected wind power operators. Details of new wind power projects were also presented. 11 fig.
Transnational tobacco companies (TTCs) considered Turkey an important, potential investment market because of its high consumption rates and domestic commitment to tobacco. This paper outlines how British American Tobacco (BAT) attempted to establish a joint venture with the government monopoly TEKEL, while waiting for privatisation and a private tender. Analysis of tobacco industry documents from the Guildford Depository and online tobacco document sources. BAT failed to establish a market share in Turkey until 2000 despite repeated attempts to form a joint venture with Turkey's tobacco monopoly, TEKEL, once the market liberalised in the mid 1980s. BAT's failure in the Turkish market was due to a misguided investment strategy focused solely on acquiring TEKEL and is contrasted with Philip Morris success in Turkey despite both TTCs working within Turkey's unstable and corrupt investing climate.
Pratt, D J
BS5750 is the British Standard on "Quality Systems". Its equivalent in European Standards is EN29000 and in the International Standards Organisation ISO9000. This paper points out that these standards lay down formalised procedures and require documentation but do not ipso facto lead to quality assurance. The author points to the Japanese post-war industrial success as being an example of Total Quality Management within the framework provided by the philosophy of Dr. W. Edwards Deming (1988 and 1993). This philosophy on the management of "systems" to provide high quality products and services is briefly outlined. The author argues that improvement in prosthetic and orthotic services will not be reached through implementation of BS5750 but rather through radical rethinking and the adoption and application of the Deming philosophy.
Blakeley, Ruth; Raphael, Sam
Despite long-standing allegations of UK involvement in prisoner abuse during counterterrorism operations as part of the US-led 'war on terror', a consistent narrative emanating from British government officials is that Britain neither uses, condones nor facilitates torture or other cruel, inhuman or degrading treatment and punishment. We argue that such denials are untenable. We have established beyond reasonable doubt that Britain has been deeply involved in post-9/11 prisoner abuse, and we can now provide the most detailed account to date of the depth of this involvement. We argue that it is possible to identify a peculiarly British approach to torture in the 'war on terror', which is particularly well-suited to sustaining a narrative of denial. To explain the nature of UK involvement, we argue that it can be best understood within the context of how law and sovereign power have come to operate during the 'war on terror'. We turn here to the work of Judith Butler, and explore the role of Britain as a 'petty sovereign', operating under the state of exception established by the US executive. UK authorities have not themselves suspended the rule of law so overtly; indeed, they have repeatedly insisted on their commitment to it. Nevertheless, they have been able to construct a rhetorical, legal and policy 'scaffold' that has enabled them to demonstrate at least procedural adherence to human rights norms while, at the same time, allowing UK officials to acquiesce in the arbitrary exercise of sovereignty over individuals who are denied any access to appropriate representation or redress in compliance with the rule of law.
Boyd, M.; Murray-Hill, A.; Schaddelee, K. [Wise Energy Co-op, Victoria, BC (Canada)
This report evaluates the potential for biodiesel as a viable fuel in British Columbia. Biodiesel is a non-toxic, biodegradable, renewable fuel produced from recycled bio-oils that can be used to replace conventional petroleum diesel. The report also examines potential feedstock characteristics, output volumes and environmental impacts. Production of biodiesel is increasing globally due to its economic, human and environmental health benefits. Canada's Climate Change Action Plan target of 500 million litres of biodiesel production per year by 2010 will also contribute to biodiesel growth. The use of pure biodiesel as an alternative fuel results in reduced emissions of carbon dioxide, sulphur dioxide, methane, unburned hydrocarbons, carbon monoxide, particulate matter and polycyclic aromatic hydrocarbons. British Columbia's biodiesel feedstock volumes yield a total theoretical capacity of 125 million litres per year of biodiesel, or 4.5 per cent of the province's total annual diesel consumption The feedstock is enough to fuel over 3,700 transit buses annually and significantly reduce greenhouse gas emissions. This report outlines the activities needed to establish commercial biodiesel companies in the province. It also examines standards and regulatory issues; technology availability; cost and processing analysis; potential markets and distribution channels; and environmental impact comparisons. The 4 critical factors that will determine the success or failure of a commercial biodiesel project include: the ability to balance feedstock supplies, processing technology, and market penetration in an integrated system that is reliable and efficient; the ability to form stable strategic alliances with feedstock suppliers, distributors and end users; the ability to deal effectively with competitive pressures; and, the ability to generate a business plan that will attract financing. It was concluded that community-based biodiesel production at a plant scale
Agar, Douglas J.
Since 1992, the British Columbia Association of School Psychologists (BCASP) has been the professional body for school psychologists in British Columbia. In the intervening 24 years, BCASP has been very successful in performing the dual roles of a certifying body and a professional development organization for school psychologists in British…
Smith, Heather Jane
The construct of Britishness, as with nationalism elsewhere in the world, although amorphous and permeable over time, continues to be used by politicians and the media as a powerful exclusionary force. Moreover in England, fundamental British values (FBV), its most recent and official incarnation, now hold particular currency in education policy…
Demonstrates how the British Colonial Office employed public relations strategies as they administered the British colony of Northern Rhodesia before, during, and after World War II. Demonstrates how civil servants in London and colonial officials implemented public relations policies, strategies, and tactics on an ad hoc basis, covering political…
The article analyses the presence of William Shakespeare as intertext in three recent novels by black British writers which deploy the work of the Bard as they explore British and European identities. Caryl Phillips's "The Nature of Blood" recreates an Othello-like figure who in early Modern Venice struggles to come to terms with his…
Full Text Available This paper is about cellulose acetate microfilm from the British Library perspective. It traces how acetate microfilm became an issue for the British Library and describes cellulose acetate deterioration. This is followed by details of what has already been done about the situation and what action is planned for the future.
Book Review: "Indigenous Peoples of the British Dominions and the First World War"by Timothy C. Winegard. ... Timothy Winegard saw active duty in the Canadian Reserve Force from 2001 to 2010 and served on detachment duty to the British Army for a two-year period. He obtained various academic degrees from 1999 ...
The serious damage done to the British economy during World War II compelled the leaders of the British Government to look for ways of repairing the damage. Hence, they turned to the colonies for help. Inter alia, they needed financial assistance because of their inability to pay for imports from the United States. Imports of ...
Discusses the relationships between the British Government's Information Services and both the British Broadcasting Corporation (BBC) and the commercial film trade after the BBC's television service resumed independent broadcasts in 1946. Examines proposals for using television as an alternative outlet for commercial and official films. (GEA)
Russian-French "Entente Cordial" when British turned from bitterest enemy to ..... As it was mentioned above, the army's food supplies were provided in an ... Cronje's capitulation will be a glorious page in the history of the British Anns forever. , ...
Bhikha, Aqeela; Farooq, Saeed; Chaudhry, Nasim; Naeem, Farooq; Husain, Nusrat
A strong interest in the understanding, exploring, and extracting explanatory models of psychosis has recently arisen. Explanatory models (EMs) offer justifications and propose explanations when coping with and treating illnesses. Therefore, they may be important predictors of clinical outcome. Explanatory models of psychosis have been explored in many non-Western countries. However, very little research has examined EMs of psychosis in the UK. We therefore, aimed to elicit and describe explanatory models of psychosis amongst British South Asians, using both quantitative and qualitative methods. EMs of psychosis were examined using the Short Explanatory Model Interview (SEMI) in a cross-sectional sample of 45 patients. Most patients (55.5%) attributed their illness to supernatural causes. Few patients cited a biological (4.4%) cause. Majority of patients held dual EMs of psychosis (77.7%), combining prescribed medication and seeing a traditional healer as a treatment method. Duration of Untreated Psychosis (DUP) was not significantly associated with EMs of psychosis. The results suggest that patients hold multi-explanatory models in order to make sense of their illness and these stem from deep rooted traditional beliefs. This highlights the importance of educational intervention, culturally adapted psychological interventions and possibly working together with traditional healers in the UK to provide a positive support system. Further work is required in order to fully understand the relationship between EMs of psychosis and DUP. Copyright © 2015 Elsevier B.V. All rights reserved.
Hesketh, Kathryn L; Duncan, Susan M; Estabrooks, Carole A; Reimer, Marlene A; Giovannetti, Phyllis; Hyndman, Kathryn; Acorn, Sonia
Workplace violence is a significant and widespread public health concern among health care workers, including nurses. With growing awareness of how practice environments influence patient outcomes and the retention of health professionals, it is timely to consider the impact of workplace violence in hospitals. Registered nurses in Alberta and British Columbia, Canada were surveyed on their experiences of violence in the workplace over the last five shifts. Our results suggest that nurses are experiencing many incidences of violence in a given work week, particularly in the emergency, psychiatric, and medical-surgical settings. Most violent acts are perpetrated by patients, but there is also a significant portion of violence and abuse committed by hospital co-workers, particularly emotional abuse and sexual harassment. Our results also indicate that the majority of workplace violence is not reported. We suggest that using the Broken Windows theory might be a useful tool to conceptualize why workplace violence occurs, and that this framework be used to begin to develop new violence prevention policies and strategies.
Morgan, David; Fisher, Noel; Ahmad, Aman; Alam, Fazle
Operation notes are an important part of medical records for clinical, academic and medicolegal reasons. This study audited the quality of operative note keeping for total knee replacements against the standards set by the British Orthopaedic Association (BOA). A prospective review of all patients undergoing total knee replacement at a district general hospital over 8 months. Data recorded were compared with those required by the BOA good-practice guidelines. Change in practice was implemented and the audit cycle completed. Data were statistically analysed. A total of 129 operation notes were reviewed. There was a significant improvement in the mean number of data points recorded from 9.6 to 13.1. The least well recorded data were diagnosis, description of findings, alignment and postoperative flexion range. All had a significant improvement except description of findings. The operating surgeon writing the note improved from 56% to 67%. Detailed postoperative instructions also improved in quality. Surgeon education and the use of a checklist produce better quality total knee replacement operation notes in line with BOA guidelines. Further improvements may be made by making the data points part of the operation note itself.
Hasan, Jafar; Chatterjee, Kaushik
The tendency of bacterial cells to adhere and colonize a material surface leading to biofilm formation is a fundamental challenge underlying many different applications including microbial infections associated with biomedical devices and products. Although, bacterial attachment to surfaces has been extensively studied in the past, the effect of surface topography on bacteria-material interactions has received little attention until more recently. We review the recent progress in surface topography based approaches for engineering antibacterial surfaces. Biomimicry of antibacterial surfaces in nature is a popular strategy. Whereas earlier endeavors in the field aimed at minimizing cell attachment, more recent efforts have focused on developing bactericidal surfaces. However, not all such topography mediated bactericidal surfaces are necessarily cytocompatible thus underscoring the need for continued efforts for research in this area for developing antibacterial and yet cytocompatible surfaces for use in implantable biomedical applications. This mini-review provides a brief overview of the current strategies and challenges in the emerging field of topography mediated antibacterial surfaces.
Andersen, Ole Baltazar; Knudsen, Per
-2004. It is the first global MSS without a polar gap including all of the Arctic Ocean by including laser altimetry from the ICESat mission. The mean dynamic topography (MDT) is the quantity that bridges the geoid and the mean sea surface constraining large-scale ocean circulation. Here we present a new high...
Rees, Vaughan W.; Kreslake, Jennifer M.; Wayne, Geoffrey Ferris; O Connor, Richard J.; Cummings, K. Michael; Connolly, Gregory N.
Background Human puffing topography promotes tobacco dependence by ensuring nicotine delivery, but the factors that determine puffing behavior are not well explained by existing models. Chemosensory cues generated by variations in cigarette product design features may serve as conditioned cues to allow the smoker to optimize nicotine delivery by adjusting puffing topography. Internal tobacco industry research documents were reviewed to understand the influence of sensory cues on puffing topography, and to examine how the tobacco industry has designed cigarettes, including modified risk tobacco products (MRTPs), to enhance puffing behavior to optimize nicotine delivery and product acceptability. Methods Relevant internal tobacco industry documents were identified using systematic searching with key search terms and phrases, and then snowball sampling method was applied to establish further search terms. Results Modern cigarettes are designed by cigarette manufacturers to provide sensory characteristics that not only maintain appeal, but provide cues which inform puffing intensity. Alterations in the chemosensory cues provided in tobacco smoke play an important role in modifying smoking behavior independently of the central effects of nicotine. Conclusions An associative learning model is proposed to explain the influence of chemosensory cues on variation in puffing topography. These cues are delivered via tobacco smoke and are moderated by design features and additives used in cigarettes. The implications for regulation of design features of modified risk tobacco products, which may act to promote intensive puffing while lowering risk perceptions, are discussed. PMID:22365895
Sørensen, Per Aggerholm; Kiil, Søren; Dam-Johansen, Kim
and thereby the substrate topography, whereas the coating thickness had little influence. The presence of a significant potential gradient between the anode and the cathode and the dependency of the delamination rate on the tortuosity of the steel surface suggests that cathodic delamination is controlled...
English speakers talk and think about Time in terms of physical space. The past is behind us, and the future is in front of us. In this way, we "map" space onto Time. This dissertation addresses the specificity of this physical space, or its topography. Inspired by languages like Yupno (Nunez, et al., 2012) and Bamileke-Dschang (Hyman,…
Huang, Jingyan; Zhang, Xinchun; Yan, Wangxiang; Chen, Zhipei; Shuai, Xintao; Wang, Anxun; Wang, Yan
Surface modification on titanium implants plays an important role in promoting mesenchymal stem cell (MSC) response to enhance osseointegration persistently. In this study, nano-scale TiO 2 nanotube topography (TNT), micro-scale sand blasted-acid etched topography (SLA), and hybrid sand blasted-acid etched/nanotube topography (SLA/TNT) were fabricated on the surfaces of titanium implants. Although the initial cell adherence at 60 min among TNT, SLA and TNT/SLA was not different, SLA and SLA/TNT presented to be rougher and suppressed the proliferation of MSC. TNT showed hydrophilic surface and balanced promotion of cellular functions. After being implanted in rabbit femur models, TNT displayed the best osteogenesis inducing ability as well as strong bonding strength to the substrate. These results indicate that nano-scale TNT provides favorable surface topography for improving the clinical performance of endosseous implants compared with micro and hybrid micro/nano surfaces, suggesting a promising and reliable surface modification strategy of titanium implants for clinical application. Copyright © 2017 Elsevier Inc. All rights reserved.
Doğan, Aysun Şanal; Gürdal, Canan; Köylü, Mehmet Talay
The purpose of this study was to assess the repeatability of corneal topography measurements in dry eye patients and healthy controls. Participants underwent consecutive corneal topography measurements (Sirius; Costruzione Strumenti Oftalmici, Florence, Italy). Two images with acquisition quality higher than 90% were accepted. The following parameters were evaluated: minimum and central corneal thickness, aqueous depth, apex curvature, anterior chamber volume, horizontal anterior chamber diameter, iridocorneal angle, cornea volume, and average simulated keratometry. Repeatability was assessed by calculating intra-class correlation coefficient. Thirty-three patients with dry eye syndrome and 40 healthy controls were enrolled to the study. The groups were similar in terms of age (39 [18-65] vs. 30.5 [18-65] years, p=0.198) and gender (M/F: 4/29 vs. 8/32, p=0.366). Intra-class correlation coefficients among all topography parameters within both groups showed excellent repeatability (>0.90). The anterior segment measurements provided by the Sirius corneal topography system were highly repeatable for dry eye patients and are sufficiently reliable for clinical practice and research.
A review of classical percolation theory is presented, with an emphasis on novel applications to statistical topography, turbulent diffusion, and heterogeneous media. Statistical topography involves the geometrical properties of the isosets (contour lines or surfaces) of a random potential ψ(x). For rapidly decaying correlations of ψ, the isopotentials fall into the same universality class as the perimeters of percolation clusters. The topography of long-range correlated potentials involves many length scales and is associated either with the correlated percolation problem or with Mandelbrot's fractional Brownian reliefs. In all cases, the concept of fractal dimension is particularly fruitful in characterizing the geometry of random fields. The physical applications of statistical topography include diffusion in random velocity fields, heat and particle transport in turbulent plasmas, quantum Hall effect, magnetoresistance in inhomogeneous conductors with the classical Hall effect, and many others where random isopotentials are relevant. A geometrical approach to studying transport in random media, which captures essential qualitative features of the described phenomena, is advocated
Erik Weinell, Claus; Sørensen, Per A.; Kiil, Søren
This article describes the effect of steel substrate topography on coating cathodic delamination. The study showed that the surface preparation can be used to control and minimize the rate of cathodic delamination. The coating should have maximum wetting properties so that substrates with high...
Omang, O.C.D.; Forsberg, René
Three different methods of handling topography in geoid determination were investigated. The first two methods employ the residual terrain model (RTM) remove-restore technique, yielding the quasi-geoid, whereas the third method uses the classical Helmert condensation method, yielding the geoid. All...
Yu, Guo-Bin; Liu, En-Hai; Zhao, Ru-Jin; Zhong, Jie; Zhou, Xiang-Dong; Zhou, Wu-Lin; Wang, Jin; Chen, Yuan-Pei; Hao, Yong-Jie
Chang'e-3 was China's first soft-landing lunar probe that achieved a successful roving exploration on the Moon. A topography camera functioning as the lander's “eye” was one of the main scientific payloads installed on the lander. It was composed of a camera probe, an electronic component that performed image compression, and a cable assembly. Its exploration mission was to obtain optical images of the lunar topography in the landing zone for investigation and research. It also observed rover movement on the lunar surface and finished taking pictures of the lander and rover. After starting up successfully, the topography camera obtained static images and video of rover movement from different directions, 360° panoramic pictures of the lunar surface around the lander from multiple angles, and numerous pictures of the Earth. All images of the rover, lunar surface, and the Earth were clear, and those of the Chinese national flag were recorded in true color. This paper describes the exploration mission, system design, working principle, quality assessment of image compression, and color correction of the topography camera. Finally, test results from the lunar surface are provided to serve as a reference for scientific data processing and application. (paper)
A comparison is made of the contrast in topographies by diffraction, produced by synchrotron radiation and by copper and molybdenum characteristic radiations conventionally generated. Some experiments in the study of diamond geminated crystals and the photoluminescence of several crystalline specimens by synchrotron radiation are related. (L.C.) [pt
Van R. Kane; James A. Lutz; C. Alina Cansler; Nicholas A. Povak; Derek J. Churchill; Douglas F. Smith; Jonathan T. Kane; Malcolm P. North
Mountainous topography creates fine-scale environmental mosaics that vary in precipitation, temperature, insolation, and slope position. This mosaic in turn influences fuel accumulation and moisture and forest structure. We studied these the effects of varying environmental conditions across a 27,104 ha landscape within Yosemite National Park, California, USA, on the...
Truckenmuller, R.; Giselbrecht, S.; Escalante-Marun, M.; Groenendijk, M.; Papenburg, B.; Rivron, N.; Unadkat, H.; Saile, V.; Subramaniam, V.; Berg, A. van den; Blitterswijk, C. Van; Wessling, M.; Boer, J. den; Stamatialis, D.
This paper presents cell culture substrates in the form of microcontainer arrays with overlaid surface topographies, and a technology for their fabrication. The new fabrication technology is based on microscale thermoforming of thin polymer films whose surfaces are topographically prepatterned on a
Truckenmüller, Roman; Giselbrecht, Stefan; Escalante-Marun, Maryana; Groenendijk, Max; Papenburg, Bernke; Rivron, Nicolas; Unadkat, Hemant; Saile, Volker; Subramaniam, Vinod; van den Berg, Albert; van Blitterswijk, Clemens; Wessling, Matthias; Boer, Jan de; Stamatialis, Dimitrios
This paper presents cell culture substrates in the form of microcontainer arrays with overlaid surface topographies, and a technology for their fabrication. The new fabrication technology is based on microscale thermoforming of thin polymer films whose surfaces are topographically prepatterned on a
BACKGROUND: Openings of hepatic veins into the retrohepatic surface of the inferior vena cava. (ostia venae hepatica) play a part in controlling hepatic circulation by acting as collateral channels in obstruction. Their topography and distribution must be taken into account during catheterization and liver transplantation.
Aysun Şanal Doğan
Full Text Available Objectives: The purpose of this study was to assess the repeatability of corneal topography measurements in dry eye patients and healthy controls. Materials and Methods: Participants underwent consecutive corneal topography measurements (Sirius; Costruzione Strumenti Oftalmici, Florence, Italy. Two images with acquisition quality higher than 90% were accepted. The following parameters were evaluated: minimum and central corneal thickness, aqueous depth, apex curvature, anterior chamber volume, horizontal anterior chamber diameter, iridocorneal angle, cornea volume, and average simulated keratometry. Repeatability was assessed by calculating intra-class correlation coefficient. Results: Thirty-three patients with dry eye syndrome and 40 healthy controls were enrolled to the study. The groups were similar in terms of age (39 [18-65] vs. 30.5 [18-65] years, p=0.198 and gender (M/F: 4/29 vs. 8/32, p=0.366. Intra-class correlation coefficients among all topography parameters within both groups showed excellent repeatability (>0.90. Conclusion: The anterior segment measurements provided by the Sirius corneal topography system were highly repeatable for dry eye patients and are sufficiently reliable for clinical practice and research.
Charnock, Henry; Killworth, Peter D.
A recent note (Hopkins, T.S., 1996. A note on the geostrophic velocity field referenced to a point. Continental Shelf Research 16, 1621-1630) suggests a method for evaluating absolute pressure gradients in stratified water over topography. We demonstrate that this method requires no along-slope bottom velocity, in contradiction to what is usually observed, and that mass is not conserved.
Lam, F.P. A.
This thesis addresses the observation, analysis and dynamics of waves as being trapped, generated and focused by sloping topography. ---Shelf waves with diurnal tidal frequency off Greenland--- Tidal analysis has been carried out on current measurements at a “cross-shelf” transect off Greenland at
van den Boogaard, Toine; Louis, Eric; Zoethout, E.; Goldberg, K.A.; Bijkerk, Frederik
Mo/Si multilayer mirrors with nanoscale bilayer thicknesses have been deposited on stepped substrate topographies, using various deposition angles. The multilayer morphology at the step-edge region was studied by cross section transmission electron microscopy. A transition from a continuous- to
Tai, Yinxia; Zhu, Xianchun; Sen, Yan; Liu, Chang; Zhang, Xian; Shi, Xueming
To evaluate the influence of different surface treatments on porcelain surface topography. Metal ceramic prostheses in 6 groups were treated according to the different surface treatment methods, and the surface topography was observed through scanning electron microscope (SEM). Group A was the control one (untreated), group B was etched by 9.6% hydrofluoric acid(HF), group C was deglazed by grinding and then etched by 9.6% HF, group D was treated with Nd: YAG laser irradiation(0.75 W) and HF etching, group E was treated with Nd: YAG laser irradiation (1.05 W) and HF etching, and group F was treated with laser irradiation (1.45 W) and HF etching. Surface topography was different in different groups. A lot of inerratic cracks with the shapes of rhombuses and grid, and crater with a shape of circle were observed on the ceramic surface after treatment with energy parameters of 1.05 W Nd: YAG laser irradiation and 9.6% HF etching (group E). Surface topography showed a lot of concaves on the inner wall of the cracks, and the concaves with diameter of 1-5 microm could be observed on the inner wall of the holes, which had a diameter of 20 microm under SEM. The use of Nd: YAG laser irradiation with the energy parameters of 1.05 W and the HF with a concentration of 9.6% can evenly coarsen the porcelain surface, that is an effective surface treatment method.
Bonisteel-Cormier, J.M.; Nayegandhi, Amar; Fredericks, Xan; Jones, J.W.; Wright, C.W.; Brock, J.C.; Nagle, D.B.
This DVD contains lidar-derived first-surface (FS) and bare-earth (BE) topography GIS datasets of a portion of the Potato Creek watershed in the Apalachicola-Chattahoochee-Flint River basin, Georgia. These datasets were acquired on February 27, 2010.
Williams, David R.; Greeley, Ronald
The Tellus Regio area of Venus represents a subset of a narrow latitude band where Pioneer Venus Orbiter (PVO) altimetry data, line-of-sight (LOS) gravity data, and Venera 15/16 radar images have all been obtained with good resolution. Tellus Regio also has a wide variety of surface morphologic features, elevations ranging up to 2.5 km, and a relatively low LOS gravity anomaly. This area was therefore chosen in order to examine the theoretical stress distributions resulting from various models of compensation of the observed topography. These surface stress distributions are then compared with the surface morphology revealed in the Venera 15/16 radar images. Conclusions drawn from these comparisons will enable constraints to be put on various tectonic parameters relevant to Tellus Regio. The stress distribution is calculated as a function of the topography, the equipotential anomaly, and the assumed model parameters. The topography data is obtained from the PVO altimetry. The equipotential anomaly is estimated from the PVO LOS gravity data. The PVO LOS gravity represents the spacecraft accelerations due to mass anomalies within the planet. These accelerations are measured at various altitudes and angles to the local vertical and therefore do not lend themselves to a straightforward conversion. A minimum variance estimator of the LOS gravity data is calculated, taking into account the various spacecraft altitudes and LOS angles and using the measured PVO topography as an a priori constraint. This results in an estimated equivalent surface mass distribution, from which the equipotential anomaly is determined.
Williams, D.R.; Greeley, R.
The Tellus Regio area of Venus represents a subset of a narrow latitude band where Pioneer Venus Orbiter (PVO) altimetry data, line-of-sight (LOS) gravity data, and Venera 15/16 radar images have all been obtained with good resolution. Tellus Regio also has a wide variety of surface morphologic features, elevations ranging up to 2.5 km, and a relatively low LOS gravity anomaly. This area was therefore chosen in order to examine the theoretical stress distributions resulting from various models of compensation of the observed topography. These surface stress distributions are then compared with the surface morphology revealed in the Venera 15/16 radar images. Conclusions drawn from these comparisons will enable constraints to be put on various tectonic parameters relevant to Tellus Regio. The stress distribution is calculated as a function of the topography, the equipotential anomaly, and the assumed model parameters. The topography data is obtained from the PVO altimetry. The equipotential anomaly is estimated from the PVO LOS gravity data. The PVO LOS gravity represents the spacecraft accelerations due to mass anomalies within the planet. These accelerations are measured at various altitudes and angles to the local vertical and therefore do not lend themselves to a straightforward conversion. A minimum variance estimator of the LOS gravity data is calculated, taking into account the various spacecraft altitudes and LOS angles and using the measured PVO topography as an a priori constraint. This results in an estimated equivalent surface mass distribution, from which the equipotential anomaly is determined
Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 7. 175 Years of Linear Programming - Minimax and Cake Topography. Vijay Chandru M R Rao. Series Article Volume 4 Issue 7 July 1999 pp 4-13. Fulltext. Click here to view fulltext PDF. Permanent link:
Full Text Available While advances in magnetic resonance imaging (MRI throughout the last decades have enabled the detailed anatomical and functional inspection of the human brain non-invasively, to date there is no consensus regarding the precise subdivision and topography of the areas forming the human auditory cortex. Here, we propose a topography of the human auditory areas based on insights on the anatomical and functional properties of human auditory areas as revealed by studies of cyto- and myelo-architecture and fMRI investigations at ultra-high magnetic field (7 Tesla. Importantly, we illustrate that - whereas a group-based approach to analyze functional (tonotopic maps is appropriate to highlight the main tonotopic axis - the examination of tonotopic maps at single subject level is required to detail the topography of primary and non-primary areas that may be more variable across subjects. Furthermore, we show that considering multiple maps indicative of anatomical (i.e. myelination as well as of functional properties (e.g. broadness of frequency tuning is helpful in identifying auditory cortical areas in individual human brains. We propose and discuss a topography of areas that is consistent with old and recent anatomical post mortem characterizations of the human auditory cortex and that may serve as a working model for neuroscience studies of auditory functions.
Maddux, Scott D; Franciscus, Robert G
Infraorbital morphology is often included in phylogenetic and functional analyses of Homo. The inclusion of distinct infraorbital configurations, such as the "canine fossa" in Homo sapiens or the "inflated" maxilla in Neandertals, is generally based on either descriptive or qualitative assessments of this morphology, or simple linear chord and subtense measurements. However, the complex curvilinear surface of the infraorbital region has proven difficult to quantify through these traditional methods. In this study, we assess infraorbital shape and its potential allometric scaling in fossil Homo (n=18) and recent humans (n=110) with a geometric morphometric method well-suited for quantifying complex surface topographies. Our results indicate that important aspects of infraorbital shape are correlated with overall infraorbital size across Homo. Specifically, individuals with larger infraorbital areas tend to exhibit relatively flatter infraorbital surface topographies, taller and narrower infraorbital areas, sloped inferior orbital rims, anteroinferiorly oriented maxillary body facies, posteroinferiorly oriented maxillary processes of the zygomatic, and non-everted lateral nasal margins. In contrast, individuals with smaller infraorbital regions generally exhibit relatively depressed surface topographies, shorter and wider infraorbital areas, projecting inferior orbital rims, posteroinferiorly oriented maxillary body facies, anteroinferiorly oriented maxillary processes, and everted lateral nasal margins. These contrasts form a continuum and only appear dichotomized at the ends of the infraorbital size spectrum. In light of these results, we question the utility of incorporating traditionally polarized infraorbital morphologies in phylogenetic and functional analyses without due consideration of continuous infraorbital and facial size variation in Homo. We conclude that the essentially flat infraorbital surface topography of Neandertals is not unique and can be
Medical emergencies can occur in the dental practice. Medical Emergencies in the Dental Practice and Emergency Drugs in the Dental Practice posters have been designed to help dental practitioners to respond effectively and safely to a medical emergency. These posters, endorsed by the British Dental Association, are included with this issue of the British Dental Journal. Further copies can be downloaded from: https://www.walsallhealthcare.nhs.uk/medical-education.aspx.
Mary V. Graham
Full Text Available Bacterial surface fouling is problematic for a wide range of applications and industries, including, but not limited to medical devices (implants, replacement joints, stents, pacemakers, municipal infrastructure (pipes, wastewater treatment, food production (food processing surfaces, processing equipment, and transportation (ship hulls, aircraft fuel tanks. One method to combat bacterial biofouling is to modify the topographical structure of the surface in question, thereby limiting the ability of individual cells to attach to the surface, colonize, and form biofilms. Multiple research groups have demonstrated that micro and nanoscale topographies significantly reduce bacterial biofouling, for both individual cells and bacterial biofilms. Antifouling strategies that utilize engineered topographical surface features with well-defined dimensions and shapes have demonstrated a greater degree of controllable inhibition over initial cell attachment, in comparison to undefined, texturized, or porous surfaces. This review article will explore the various approaches and techniques used by researches, including work from our own group, and the underlying physical properties of these highly structured, engineered micro/nanoscale topographies that significantly impact bacterial surface attachment.
McDonald, S.; Furberg, M.; Rother, P. [British Columbia Lung Association, Vancouver, BC (Canada)
Scientific evidence is rising regarding the danger of air pollution. Poor air quality can pose a problem in British Columbia, particularly in interior communities when temperature inversions, during certain times of the year, trap pollutants in mountain valleys. This document described where pollutants come from, ambient levels in the atmosphere and how they affect human health. Particular focus was on fine particulate matter, ozone and oxides of nitrogen, as these 3 pollutants have been linked to health impacts. The cost of air pollution through increased health care costs and the economic impact of lost productivity from missed work days was also discussed along with the influence of poor air quality on crop damage and forestry production losses. The document also outlined government and community initiatives to protect public health and listed some measures that individuals can do to keep air clean. Air pollution stems from activities such as land development, burning fossil fuels for energy and transportation, industrial operations, residential wood burning and backyard burning of debris and burning from forestry and agricultural operations. The health impacts range from irritation, to coughing and worsening of existing heart and lung conditions. The document states that despite all measures being taken to reduce emissions and to maintain levels of air pollutants at current low levels, health effects are still observed and still pose a burden to health care cost. Scientific evidence indicates that a further reduction in air pollution will result in health benefits. refs., figs.
Anthony, R D
The legal framework of British regulatory practice is described, with emphasis on its flexibility and the fact that responsibility rests with the licensee, leaving the NII to monitor his implementation of that duty. The UK regulatory philosophy, the mixture of selective and random sampling used and the organization of the regulatory bodies as it interacts with that of the nuclear industry are outlined. This is followed by a resume of the current nuclear safety issues and of the NII's attitude to them, including the continued operation of the aging Magnox reactors, the extended transition of the AGR from the prototype to the 'tried and tested' stage of its existence, the problems of licensing nuclear chemical plant, the CEGB's proposed introduction of the PWR into this country, the availability of increasingly sophisticated means of assessing safety, and the steadily rising public interest in nuclear power issues. The Lecture ends by noting the problems of risk perception and cost/benefit analysis, emphasizing that in striking the right balance the regulatory body must be open, prepared to justify its reasoning, and productive of conclusions which are acceptable to the public.
McDonald, S.; Furberg, M.; Rother, P.
Scientific evidence is rising regarding the danger of air pollution. Poor air quality can pose a problem in British Columbia, particularly in interior communities when temperature inversions, during certain times of the year, trap pollutants in mountain valleys. This document described where pollutants come from, ambient levels in the atmosphere and how they affect human health. Particular focus was on fine particulate matter, ozone and oxides of nitrogen, as these 3 pollutants have been linked to health impacts. The cost of air pollution through increased health care costs and the economic impact of lost productivity from missed work days was also discussed along with the influence of poor air quality on crop damage and forestry production losses. The document also outlined government and community initiatives to protect public health and listed some measures that individuals can do to keep air clean. Air pollution stems from activities such as land development, burning fossil fuels for energy and transportation, industrial operations, residential wood burning and backyard burning of debris and burning from forestry and agricultural operations. The health impacts range from irritation, to coughing and worsening of existing heart and lung conditions. The document states that despite all measures being taken to reduce emissions and to maintain levels of air pollutants at current low levels, health effects are still observed and still pose a burden to health care cost. Scientific evidence indicates that a further reduction in air pollution will result in health benefits. refs., figs
This paper presents an outline of the organization, procedures and duties of the provincial government in response to inland oil spills stemming from pipeline or tank-farm rupture, train derailment and vehicle accidents in British Columbia. Provincial response strategies were reviewed, along with their relationships to various policies and standards. Public, infrastructure and environmental protection were identified as key factors. Incident notification procedures were detailed, including outlines of roles, event criteria and call for incident management teams. Agreements and cost recovery issues were examined. The characteristics of site response were reviewed, including details of communications, tactical planning, and unified command among local and federal governments. The role of First Nations and responsible parties was also addressed. Details of shore cleanup, wildlife rescue, decontamination, and waste handling strategies were presented. The organization, missions and duties for an incident management team were outlined, along with a summary of operational guidelines and information on team positions and the establishment of joint information centres. The involvement of cooperating agencies was examined. An incident command system was also presented, including details of planning, operations, logistics, and organization. A checklist of individual duties was provided, with details of responsibilities, safety issues and general instructions for all team members. tabs., figs
Gradually evolving from the masted steam frigates of the mid-nineteenth century, the first modern cruiser is not easy to define, but for the sake of this book the starting point is taken to be Iris and Mercury of 1875. They were the RN's first steel-built warships; were designed primarily to be steamed rather than sailed; and formed the basis of a line of succeeding cruiser classes. The story ends with the last armoured cruisers, which were succeeded by the first battlecruisers (originally called armoured cruisers), and with the last Third Class Cruisers (Topaze class), all conceived before 1906. Coverage, therefore, dovetails precisely with Friedman's previous book on British cruisers, although this one also includes the wartime experience of the earlier ships.rn The two central themes are cruisers for the fleet and cruisers for overseas operations, including (but not limited to) trade protection. The distant-waters aspect covers the belted cruisers, which were nearly capital ships, intended to deal with for...
This paper reports on developing a global gas business, a British Gas plc's strategy for evolving a state owned U.K. gas company to a privatized worldwide oil and gas giant. By 2000, BG's global gas business is expected to provide 20% of its revenues, compared with 40% each from its exploration and production operations and its U.K. gas business. The global gas unit (GGU) plans to meet its targets mainly through acquiring holdings in gas transmission and distribution companies around the world. In the 12 months since GGU was established, it has made two such major acquisitions in this area. BG acquired Consumers Gas Co., Ltd., Ontario, Canada's biggest natural gas distribution company, for $943.5 million. It also took a 10% stake in Catalana de Gas SA, Barcelona, the largest privately owned gas utility in Spain and in terms of number of customers, the fourth largest in western Europe. BG also is targeting additional revenues from developing gas fired cogeneration systems in developing countries with gas reserves but no established transmission and distribution systems
Ostry, A.; Ogborn, M.; British Columbia Univ., Vancouver, BC; Takaro, T.; Bassil, K.; Allen, D.
This document described the models that scientists use to investigate the links between climate change and health. It then reviewed the evidence for possible impacts of climate change on human health. Most models conceptualize that climate change will affect the health of British Columbians directly through physical and biological pathways, and indirectly through complex socio-economic and environmental pathways. The direct physical and biological pathways will be the easiest to investigate, monitor and attribute to climate change, while the indirect socio-economic pathways will be more complex to investigate but will have the most impact. This document also provided guidance for a program of research and policy directions to better predict future impacts of climate change on health in BC and to enhance adaptation to these changes. The document suggested that basic research is needed to develop a made in BC model and infrastructure for climate change and health investigations. Currently, rural and remote forestry-dependent and Aboriginal communities in mountain pine infected zones are particularly vulnerable. However, it was concluded that although there is strong evidence for shifts in climate in BC, no direct evidence exists on the impact of climate change on human health in BC. refs., tabs., figs
The British Columbia Ministry of Energy and Mines is promoting the development of the coalbed methane (CBM) industry in the province in order to make CBM a viable and competitive investment option for industry. It is establishing a regulatory and fiscal regime for CBM development. Issues of concern regarding CBM development include water production, gas production rates, well numbers, and marginal economics. The features of the CBM royalty regime include a new producer cost of service allowance, the creation of a CBM royalty tax bank to collect excess PCOS allowances, and a royalty tax credit for wells drilled by the end of February, 2004. The marginal well adjustment factor threshold has been raised from 180 mcf per day to 600 mcf per day for CBM only. It was noted that royalties will probably not be payable for several years following the first commercial well because royalties are very depending on capital and operating costs, local infrastructure and price. Royalty regimes cannot save CBM from low gas prices, poor resources or economics. 2 figs
In this paper I propose a new interpretation of the British evolutionary synthesis. The synthetic work of J. B. S. Haldane, R. A. Fisher and J. S. Huxley was characterized by both an integration of Mendelism and Darwinism and the unification of different biological subdisciplines within a coherent framework. But it must also be seen as a bold and synthetic Darwinian program in which the biosciences served as a utopian blueprint for the progress of civilization. Describing the futuristic visions of these three scientists in their synthetic heydays, I show that, despite a number of important divergences, their biopolitical ideals could be biased toward a controlled and regimented utopian society. Their common ideals entailed a social order where liberal and democratic principles were partially or totally suspended in favor of bioscientific control and planning for the future. Finally, I will argue that the original redefinition of Darwinism that modern synthesizers proposed is a significant historical example of how Darwinism has been used and adapted in different contexts. The lesson I draw from this account is a venerable one: that, whenever we wish to define Darwinism, we need to recognize not only its scientific content and achievements but expose the other traditions and ideologies it may have supported. Copyright © 2010 Elsevier Ltd. All rights reserved.
Zhang, Dongliang; Schuster, Gerard T.; Zhan, Ge
We demonstrate an accurate method for calculating LSM images from data recorded on irregular topography. Our results with both the Marmousi and Foothill models with steep topography suggest the effectiveness of this method.
We demonstrate an accurate method for calculating LSM images from data recorded on irregular topography. Our results with both the Marmousi and Foothill models with steep topography suggest the effectiveness of this method.
Ermakov, A.; Park, R. S.; Bills, B. G.
When a spacecraft visits a planetary body, it is useful to be able to predict its gravitational and topographic properties. This knowledge is important for determining the level of perturbations in spacecraft's motion as well as for planning the observation campaign. It has been known for the Earth that the power spectrum of gravity follows a power law, also known as the Kaula rule (Kaula, 1963; Rapp, 1989). A similar rule was derived for topography (Vening-Meinesz, 1951). The goal of this paper is to generalize the power law that can characterize the gravity and topography power spectra for bodies across a wide range of size. We have analyzed shape power spectra of the bodies that have either global shape and gravity field measured. These bodies span across five orders of magnitude in their radii and surface gravities and include terrestrial planets, icy moons and minor bodies. We have found that despite having different internal structure, composition and mechanical properties, the topography power spectrum of these bodies' shapes can be modeled with a similar power law rescaled by the surface gravity. Having empirically found a power law for topography, we can map it to a gravity power law. Special care should be taken for low-degree harmonic coefficients due to potential isostatic compensation. For minor bodies, uniform density can be assumed. The gravity coefficients are a linear function of the shape coefficients for close-to-spherical bodoes. In this case, the power law for gravity will be steeper than the power law of topography due to the factor (2n+1) in the gravity expansion (e.g. Eq. 10 in Wieczorek & Phillips, 1998). Higher powers of topography must be retained for irregularly shaped bodies, which breaks the linearity. Therefore, we propose the following procedure to derive an a priori constraint for gravity. First, a surface gravity needs to be determined assuming typical density for the relevant class of bodies. Second, the scaling coefficient of the
Drone aerial photogrammetry was conducted for monitoring topography changes of small islands in the east sea of Korea. Severe weather and sea wave is eroding the islands and sometimes cause landslide and falling rock. Due to rugged cliffs in all direction and bad accessibility, ground based survey methods are less efficient in monitoring topography changes of the whole area. Camera drones can provide digital images and movie in every corner of the islands, and drone aerial photogrammetry is powerful to get precise digital surface model (DSM) for a limited area. We have got a set of digital images to construct a textured 3D model of the project area every year since 2014. Flight height is in less than 100m from the top of those islands to get enough ground sampling distance (GSD). Most images were vertically captured with automatic flights, but we also flied drones around the islands with about 30°-45° camera angle for constructing 3D model better. Every digital image has geo-reference, but we set several ground control points (GCPs) on the islands and their coordinates were measured with RTK surveying methods to increase the absolute accuracy of the project. We constructed 3D textured model using photogrammetry tool, which generates 3D spatial information from digital images. From the polygonal model, we could get DSM with contour lines. Thematic maps such as hill shade relief map, aspect map and slope map were also processed. Those maps make us understand topography condition of the project area better. The purpose of this project is monitoring topography change of these small islands. Elevation difference map between DSMs of each year is constructed. There are two regions showing big negative difference value. By comparing constructed textured models and captured digital images around these regions, it is checked that a region have experienced real topography change. It is due to huge rock fall near the center of the east island. The size of fallen rock can be
Utilizing Bourdieu's concept of the habitus, Keith Macdonald has recently examined the elite social origins of the British officer corps. His analysis is valid as far at it goes but it ignores the professional practices of British officers. This article examines Britain's Joint Services Command and Staff College to assess the unification of the three services around common forms of military practice. It argues that while the new staff college has been effective in disseminating new forms of professional expertise among British officers, various practices have been institutionalized which actively undermine the unity of the officer corps.
This paper reports that British Gas plc, London, is driving to boost the share of its business that comes form outside the U.K. Non-U.K. activities accounted for about 10% of the company's business last year. By the turn of the century earnings form British Gas's non-U.K. exploration and production activities are expected to be about in line with those form the U.K. core business. In addition, the company's global gas business unit-acquisitions, sales, of British Gas technology worldwide, and power generation form gas-will contribute significantly to overseas earnings
James K. Wither
Full Text Available This article explores the attempts by the UK MOD to eradicate bullying in the British Army. Although British recruits are not confronted by mistreatment that compares with the phenomenon of dedovshchina, the Army has struggled to eliminate incidents of bullying from the ranks, which have tarnished the image of the British Army. The article examines the nature and extent of the problem, the efficacy of official policy to combat it, and suggests reasons why bullying persists even in a long- standing professional army. It also seeks to provide instructive insights for those militaries of the successor states of the Soviet Union that are currently blighted by dedovshchina.
Adams, David P.; Sinclair, Michael B.; Mayer, Thomas M.; Vasile, Michael J.; Sweatt, William C.
Methods and apparatus whereby an optical interferometer is utilized to monitor and provide feedback control to an integrated energetic particle column, to create desired topographies, including the depth, shape and/or roughness of features, at a surface of a specimen. Energetic particle columns can direct energetic species including, ions, photons and/or neutral particles to a surface to create features having in-plane dimensions on the order of 1 micron, and a height or depth on the order of 1 nanometer. Energetic processes can include subtractive processes such as sputtering, ablation, focused ion beam milling and, additive processes, such as energetic beam induced chemical vapor deposition. The integration of interferometric methods with processing by energetic species offers the ability to create desired topographies at surfaces, including planar and curved shapes.
Maculotti, Giacomo; Feng, Xiaobing; Galetto, Maurizio; Leach, Richard
In this work, the measurement noise of a point autofocus surface topography measuring instrument is evaluated, as the first step towards establishing a route to traceability for this type of instrument. The evaluation is based on the determination of the metrological characteristics for noise as outlined in draft ISO specification standards by using a calibrated optical flat. The static noise and repeatability of the autofocus sensor are evaluated. The influence of environmental disturbances on the measured surface topography and the built-in software to compensate for such influences are also investigated. The instrument was found to have a measurement noise of approximately 2 nm or, when expressed with the measurement bandwidth, 0.4 nm for a single-point measurement.
Zhang Ningning; Wang Zhenzhong; Pan Ri; Wang Chunjin; Guo Yinbiao
Workpiece surface profile, texture and roughness can be predicted by modeling the topography of wheel surface and modeling kinematics of grinding process, which compose an important part of precision grinding process theory. Parallel grinding technology is an important method for nonaxisymmetric aspheric lens machining, but there is few report on relevant simulation. In this paper, a simulation method based on parallel grinding for precision machining of aspheric lens is proposed. The method combines modeling the random surface of wheel and modeling the single grain track based on arc wheel contact points. Then, a mathematical algorithm for surface topography is proposed and applied in conditions of different machining parameters. The consistence between the results of simulation and test proves that the algorithm is correct and efficient. (authors)
Finkelstein, K. D., E-mail: email@example.com; Pauling, A.; Brown, Z. [CHESS, Cornell University, Ithaca, NY (United States); Jones, R. [Department of Physics, University of Connecticut, Storrs, CT (United States); Tarun, A.; Misra, D. S. [IIa Technologies (Singapore); Jupitz, S. [St. Mary’s College of Maryland, St. Mary’s City, MD (United States); Sagan, D. C. [CLASSE, Cornell University, Ithaca, NY (United States)
CHESS has a monochromatic x-ray topography capability serving continually expanding user interest. The setup consists of a beam expanding monochromator, 6-circle diffactometer, and CHESS designed CMOS camera with real time sample-alignment capability. This provides rocking curve mapping with angle resolution as small as 2 µradians, spatial resolution to 3 microns, and field of view up to 7mm. Thus far the capability has been applied for: improving CVD-diamond growth, evaluating perfection of ultra-thin diamond membranes, correlating performance of diamond-based electronics with crystal defect structure, and defect analysis of single crystal silicon carbide. This paper describes our topography system, explains its capabilities, and presents experimental results from several applications.
Finkelstein, K. D.; Pauling, A.; Brown, Z.; Jones, R.; Tarun, A.; Misra, D. S.; Jupitz, S.; Sagan, D. C.
CHESS has a monochromatic x-ray topography capability serving continually expanding user interest. The setup consists of a beam expanding monochromator, 6-circle diffactometer, and CHESS designed CMOS camera with real time sample-alignment capability. This provides rocking curve mapping with angle resolution as small as 2 µradians, spatial resolution to 3 microns, and field of view up to 7mm. Thus far the capability has been applied for: improving CVD-diamond growth, evaluating perfection of ultra-thin diamond membranes, correlating performance of diamond-based electronics with crystal defect structure, and defect analysis of single crystal silicon carbide. This paper describes our topography system, explains its capabilities, and presents experimental results from several applications.
Wang, Zhuo; Chun, Ik Su; Li, Xiuling; Ong, Zhun-Yong; Pop, Eric; Millet, Larry; Gillette, Martha; Popescu, Gabriel
Spatial light interference microscopy (SLIM) is a novel method developed in our laboratory that provides quantitative phase images of transparent structures with a 0.3 nm spatial and 0.03 nm temporal accuracy owing to the white light illumination and its common path interferometric geometry. We exploit these features and demonstrate SLIM's ability to perform topography at a single atomic layer in graphene. Further, using a decoupling procedure that we developed for cylindrical structures, we extract the axially averaged refractive index of semiconductor nanotubes and a neurite of a live hippocampal neuron in culture. We believe that this study will set the basis for novel high-throughput topography and refractometry of man-made and biological nanostructures.
Mei, C.C.; McTigue, D.F.
The problem of submarine slope stability is of interest to both offshore engineering and geology. In an uneven topography, the weight above a horizontal plane induces two-dimensional variation in the static stress field. The action of wave pressure, which changes with depth, further introduces excess pore pressure and dynamic stresses in the sea bottom. In the present paper, we combine a simple analytical theory for the static stress by the present authors, and the recent solution by Mei and Foda for wave-induced stresses in a plane poro-elastic sea bed to account for mild bottom slope and wave shoaling, to obtain the effective stress field in a submarine topography under sea waves. Sample results are given for a ridge and a canyon. In particular the dynamic pore pressure and the combined static and dynamic effective stresses are presented. 10 references, 11 figures.
Mei, C.C.; McTigue, D.F.
The problem of submarine slope stability is of interest to both offshore engineering and geology. In an uneven topography, the weight above a horizontal plane induces two-dimensional variation in the static stress field. The action of wave pressure, which changes with depth, further introduces excess pore pressure and dynamic stresses in the sea bottom. In the present paper, we combine a simple analytical theory for the static stress by the present authors, and the recent solution by Mei and Foda for wave-induced stresses in a plane poro-elastic sea bed to account for mild bottom slope and wave shoaling, and obtain the effective stress field in a submarine topography under sea waves. Sample results are given for a ridge and a canyon. In particular, the dynamic pore pressure and the combined static and dynamic effective stresses are presented.
The bombardment of surfaces with moderate energy ions can lead to the development of various micron-sized surface structures. These structures include ridges, ledges, flat planes, pits and cones. The causal phenomena in the production of these features are sputtering, ion reflection, redeposition of sputtered material, and surface diffusion of both impurity and target-atom species. The authors concentrate on the formation of ion bombardment-induced surface topography wherein surface diffusion is a dominant process. The most thoroughly understood aspect of this topography development is the generation of cone-like structures during sputtering. The formation of cones during sputtering has been attributed to three effects. These are: (1) the presence of asperities, defects, or micro-inclusions in the surface layers, (2) the presence of impurities on the surfaces, and (3) particular crystal orientations. (Auth.)
Fujii, M; Nakayama, K
A compact filtered backprojection algorithm that suppresses the undesirable effects of skin circulation for near-infrared diffuse optical topography is proposed. Our approach centers around a depth-selective filtering algorithm that uses an inverse problem technique and extracts target signals from observation data contaminated by noise from a shallow region. The filtering algorithm is reduced to a compact matrix and is therefore easily incorporated into a real-time system. To demonstrate the validity of this method, we developed a demonstration prototype for depth-selective diffuse optical topography and performed both computer simulations and phantom experiments. The results show that the proposed method significantly suppresses the noise from the shallow region with a minimal degradation of the target signal.
Eichhorn, J; Flender, M; Kandlbinder, T; Panhans, W G; Trautmann, T; Zdunkowski, W G [Mainz Univ. (Germany). Inst. fuer Physik der Atmosphaere; Cui, K; Ries, R; Siebert, J; Wedi, N
This study describes the theoretical foundation and applications of a newly designed mesoscale model named CLIMM (climate model Mainz). In contrast to terrain following coordinates, a cartesian grid is used to keep the finite difference equations as simple as possible. The method of viscous topography is applied to the flow part of the model. Since the topography intersects the cartesian grid cells, the new concept of boundary weight factors is introduced for the solution of Poisson`s equation. A three-dimensional radiosity model was implemented to handle radiative transfer at the ground. The model is applied to study thermally induced circulations and gravity waves at an idealized mountain. Furthermore, CLIMM was used to simulate typical wind and temperature distributions for the city of Mainz and its rural surroundings. It was found that the model in all cases produced realistic results. (orig.) 38 refs.
Schumer, R.; Taloni, A.; Furbish, D. J.
Geomorphic transport laws take the form of partial differential equations in which sediment motion is a deterministic function of slope. The addition of a noise term, representing unmeasurable, or subgrid scale autogenic forcing, reproduces scaling properties similar to those observed in topography, landforms, and stratigraphy. Here we describe a transport law that generalizes previous equations by permitting transport that is local or non-local in addition to different types of noise. More importantly, we use this transport law to link the character of sediment transport to the statistics of topography and stratigraphy. In particular, we link the origin of the Sadler effect to the evolution of the earth surface via a transport law.
Arsenault, J.E. [Ontario (Canada)
Today Canada stands on the threshold of a nuclear renaissance, based on the CANDU reactor family, which depends on heavy water as a moderator and for cooling. Canada has a long history with heavy water, with commercial interests beginning in 1934, a mere two years after its discovery. At one time Canada was the world's largest producer of heavy water. The Second World War stimulated interest in this rather rare substance, such that the worlds largest supply (185 kg) ended up in Canada in 1942 to support nuclear research work at the Montreal Laboratories of the National Research Council. A year later commercial production began at Trail, British Columbia, to support work that later became known as the P-9 project, associated with the Manhattan Project. The Trail plant produced heavy water from 1943 until 1956, when it was shut down. During the war years the project was so secret that Lesslie Thomson, Special Liaison Officer reporting on nuclear matters to C.D. Howe, Minister of Munitions and Supply, was discouraged from visiting Trail operations. Thomson never did visit the Trail facility during the war. In 2005 the remaining large, tall concrete exchange tower was demolished at a cost of about $2.4 million, about the same as it cost to construct the facility about 60 years ago. Thus no physical evidence remains of this historic facility and another important artifact from Canada's nuclear history has disappeared forever. It is planned to place a plaque at the site at some point in the future. (author)
The main responsibility of the British Columbia Utilities Commission is to regulate energy utilities under its jurisdiction to ensure that energy rates are fair and that utility operators in the province provide safe, adequate and secure service to their customers. The Commission also approves the construction of new facilities planned by utilities. It also participates in the review of utility and energy projects under the Environmental Assessment Act. Several successes were achieved in 2001 as the utility implemented its first performance plan. Oral public hearings were held for applications by Pacific Northern Gas and by Pembina Pipelines, owners of the common carrier oil pipeline from Taylor to Kamloops. A review of BC Gas' rate design to apportion utility revenue requirements fairly to different classes of customers was successfully achieved by a negotiated settlement process. In 2001, there was also a high level of proposed mergers, acquisitions and divestitures. Duke Energy Corporation's share acquisition of Westcoast Energy's two affiliated gas utilities was approved. BC Gas' application to divest its customer care activities to a joint venture company with Enbridge was also reviewed, and an oral hearing was held to review a West Kootenay Power application to sell its Kootenay River hydroelectric generation assets to Columbia Basin Trust and the Columbia Power Corp. In this case, the decision rendered was that the sale terms had to be changed so that customers could share the proceeds. The utility therefore, decided not to proceed with the sale under these conditions. The BC Hydro legislated rate freeze, which was due to expire on September 30, 2001, was extended for an additional 18 months to allow the new provincial government time to implement a new energy policy. The new energy policy is expected to give the province an energy advantage by facilitating growth and diversification in energy production while providing competition and more choice for
Today Canada stands on the threshold of a nuclear renaissance, based on the CANDU reactor family, which depends on heavy water as a moderator and for cooling. Canada has a long history with heavy water, with commercial interests beginning in 1934, a mere two years after its discovery. At one time Canada was the world's largest producer of heavy water. The Second World War stimulated interest in this rather rare substance, such that the worlds largest supply (185 kg) ended up in Canada in 1942 to support nuclear research work at the Montreal Laboratories of the National Research Council. A year later commercial production began at Trail, British Columbia, to support work that later became known as the P-9 project, associated with the Manhattan Project. The Trail plant produced heavy water from 1943 until 1956, when it was shut down. During the war years the project was so secret that Lesslie Thomson, Special Liaison Officer reporting on nuclear matters to C.D. Howe, Minister of Munitions and Supply, was discouraged from visiting Trail operations. Thomson never did visit the Trail facility during the war. In 2005 the remaining large, tall concrete exchange tower was demolished at a cost of about $2.4 million, about the same as it cost to construct the facility about 60 years ago. Thus no physical evidence remains of this historic facility and another important artifact from Canada's nuclear history has disappeared forever. It is planned to place a plaque at the site at some point in the future. (author)
Antonini Philippe Roberta
Full Text Available Context: A growing amount of recent research in sport psychology has focused on trying to understand withdrawals from ultra-races. However, according to the Four E approach, the studies underestimated the embedded components of these experiences and particularly how they were linked to the specific environmental conditions in which the experiences occurred. Objective: This study aimed to characterize trail running withdrawals in relationship to race topography. Design: Qualitative design, involving self-confrontation interviews and use of a race map. Setting: Use of the race map for description of the race activity and self-confrontation interviews took place 1–3 days after the races. Participants: Ten runners who withdrew during an ultra-trail race. Data Collection and Analysis: Data on past activity traces and experiences were elicited from self-confrontation interviews. Data were coded and compared to identify common sequences and then each type of sequence was counted with regard to race topography. Results: Results showed that each sequence was related to runners’ particular possibilities for acting, feeling, and thinking, which were in turn embedded in the race topography. These sequences allowed the unfolding of the activity and increased its overall effectiveness in relation to the constraints of this specific sport. Conclusion: This study allowed us to highlight important information on how ultra-trail runners manage their races in relationship to the race environment and more specifically to its topography. The result will also help us to recommend potential adjustments to ultra-trail runners’ performance-oriented training and preparation.
Movahedan, Hossein; Namvar, Ehsan; Farvardin, Mohsen
Photorefractive keratectomy (PRK) is at risk of serious complications such as corneal ectasia, which can reduce corrected distance visual acuity. The rate of complications of PRK is higher in patients with atypical topography. To determine the outcomes of photorefractive keratectomy in patients with atypical topography. This cross-sectional study was done in 2015 in Shiraz in Iran. We included 85 eyes in this study. The samples were selected using a simple random sampling method. All patients were under evaluation for uncorrected distance visual acuity, corrected distance visual acuity, manifest refraction, corneal topography, central corneal thickness using pentacam, slit-lamp microscopy, and detailed fondus evaluation. The postoperative examination was done 1-7 years after surgery. Data were analyzed using IBM SPSS 21.0 version. To analyze the data, descriptive statistics (frequency, percentage, mean, and standard deviation), chi-square, and independent samples t-test were used. We studied 85 eyes. Among the patients, 23 (27.1%) were male and 62 (72.9%) were female. Mean age of the participants was 28.25±5.55 years. Mean postoperative refraction was - 0.37±0.55 diopters. Keratoconus or corneal ectasia was not reported in any patient in this study. There was no statistically significant difference between SI index before and after operation (p=0.736). Mean preoperative refraction was -3.84 ± 1.46 diopters in males and -4.20±1.96 diopters in females; thus there was not statistically significant difference (p = 0.435). PRK is a safe and efficient photorefractive surgery and is associated with low complication rate in patients with atypical topography.
Evans, Sarah E; Hoffman, Allison C
To review the available evidence evaluating the abuse liability, topography, subjective effects, craving and withdrawal suppression associated with e-cigarette use in order to identify information gaps and provide recommendations for future research. Literature searches were conducted between October 2012 and January 2014 using five electronic databases. Studies were included in this review if they were peer-reviewed scientific journal articles evaluating clinical laboratory studies, national surveys or content analyses. A total of 15 peer-reviewed articles regarding behavioural use and effects of e-cigarettes published between 2010 and 2014 were included in this review. Abuse liability studies are limited in their generalisability. Topography (consumption behaviour) studies found that, compared with traditional cigarettes, e-cigarette average puff duration was significantly longer, and e-cigarette use required stronger suction. Data on e-cigarette subjective effects (such as anxiety, restlessness, concentration, alertness and satisfaction) and withdrawal suppression are limited and inconsistent. In general, study data should be interpreted with caution, given limitations associated with comparisons of novel and usual products, as well as the possible effects associated with subjects' previous experience/inexperience with e-cigarettes. Currently, very limited information is available on abuse liability, topography and subjective effects of e-cigarettes. Opportunities to examine extended e-cigarette use in a variety of settings with experienced e-cigarette users would help to more fully assess topography as well as behavioural and subjective outcomes. In addition, assessment of 'real-world' use, including amount and timing of use and responses to use, would clarify behavioural profiles and potential adverse health effects.
Klipp, Emily S.; Nayegandhi, Amar; Brock, John C.; Sallenger, A.H.; Bonisteel, Jamie M.; Yates, Xan; Wright, C. Wayne
These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Texas coastline within UTM zone 14, acquired October 12-13, 2001. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative scanning lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used
Yates, Xan; Nayegandhi, Amar; Brock, John C.; Sallenger, A.H.; Bonisteel, Jamie M.; Klipp, Emily S.; Wright, C. Wayne
These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the eastern Florida panhandle coastline, acquired October 2, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create
Klipp, Emily S.; Nayegandhi, Amar; Brock, John C.; Sallenger, A.H.; Bonisteel, Jamie M.; Yates, Xan; Wright, C. Wayne
These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Texas coastline within UTM zone 15, from Matagorda Peninsula to Galveston Island, acquired October 12-13, 2001. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative scanning lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant
Yates, Xan; Nayegandhi, Amar; Brock, John C.; Sallenger, A.H.; Bonisteel, Jamie M.; Klipp, Emily S.; Wright, C. Wayne
These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the western Florida panhandle coastline, acquired October 2-4 and 7-10, 2001. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative scanning Lidar instrument originally developed by NASA, and known as the Airborne Topographic Mapper (ATM), was used during data acquisition. The ATM system is a scanning Lidar system that measures high-resolution topography of the land surface and incorporates a green-wavelength laser operating at pulse rates of 2 to 10 kilohertz. Measurements from the laser-ranging device are coupled with data acquired from inertial navigation system (INS) attitude sensors and differentially corrected global positioning system (GPS) receivers to measure topography of the surface at accuracies of +/-15 centimeters. The nominal ATM platform is a Twin Otter or P-3 Orion aircraft, but the instrument may be deployed on a range of light aircraft. Elevation measurements were collected over the survey area using the ATM system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used
Ormond, M.E.; Sothern, M.
Drawing on literature on self-help and travel guide writing, this paper interrogates five international medical travel guidebooks aimed at encouraging American and British audiences to travel abroad to purchase medical care. These guidebooks articulate a three-step self-help “program” to produce a
... self denigration, exploitation and discrimination meted on them by the British as well as their feeling of alienation, cultural dislocation and their struggle for self ... adaptation through which these immigrants will make the best out of London ...
British participation in the Esrange Special Project has developed very satisfactorily since the programme was reviewed at the last Esrange Symposium [Eastwood, 1973; Acton, 1973]. Two campaigns have been undertaken at Andoya and several more are projected
Roč. 62, Suppl. 1 (2014), s. 250-278 ISSN 0015-1831 Institutional support: RVO:68378033 Keywords : illuminated manuscripts * British library * London Subject RIV: AL - Art, Architecture, Cultural Heritage
Patterns in the geographic distribution of seven species groups were used to identify important areas for conservation in British Columbia, Canada. Potential priority sites for conservation were determined using an integer programming algorithm that maximized the number of speci...
Ghomshei, M.M.; Brown, T.L.S.; MacRae, J.M.
British Columbia is host to about 15 young volcanic centres and 60 hot springs, all evidence of presence of geothermal resources. Most high-grade geothermal prospects in British Columbia are located along 3 volcanic belts in the south-western region of the province. It is estimated that a minimum of 800 MWe can be generated from the known prospects in this region. Significant low-grade geothermal resources exist in several provincial regions. Market applications consistent with the geothermal resources known and expected to occur in British Columbia include electrical generation, process and other direct heat uses and recreation. Leasing, exploration and development operations for high-grade geothermal resources are addressed by the British Columbia open-quotes Geothermal Resources Actclose quotes which defines geothermal resources and reserves all rights to the Crown in the right of the Province
This is a study of the British scientific mission to Los Alamos, New Mexico, from 1943 to 1947, and the impact it had on the early history of the atomic age. In the years following the Manhattan Project and the production of the world's first atomic explosion in 1945, the British contribution to the Project was played down or completely ignored leaving the impression that all the atomic scientists had been American. However, the two dozen or so British scientists contributed crucially to the development of the atomic bomb. First, the initial research and reports of British scientists convinced American scientists that an atomic weapons could be constructed before the likely end of hostilities. Secondly their contribution insured the bomb was available in the shortest possible time. Also, because these scientists became involved in post-war politics and in post-war development of nuclear power, they also helped forge the nuclear boundaries of the mid-twentieth century. (UK)
Most of the methods of concrete mix design developed over the years were geared towards manual approach. ... Key words: Concrete mix design; British method; Manual Approach; Algorithm. ..... Statistics for Science and Engineering.
Roberson, Walter G
.... The successful British intervention led to the defeat of the Revolutionary United Front (RUF) and final peace accords, restored order to a failed state, and allowed the democratic restoration of the government of Sierra Leone...
National Oceanic and Atmospheric Administration, Department of Commerce — The British Columbia, Canada Forecast Model Grids provides bathymetric data strictly for tsunami inundation modeling with the Method of Splitting Tsunami (MOST)...
National Oceanic and Atmospheric Administration, Department of Commerce — The 3 arc-second British Columbia DEM will be used to support NOAA's tsunami forecast system and for tsunami inundation modeling. This DEM covers the coastal area...
Deering, Thomas E.
Comparison of responses from 38 U.S. and 27 British preservice teachers on the Ethics Position Questionnaire indicated that both groups had high idealism. U.S. teachers had lower relativism scores. (SK)
Mitchel, Jennifer A.; Hoffman-Kim, Diane
Directed migration of Schwann cells (SC) is critical for development and repair of the peripheral nervous system. Understanding aspects of motility specific to SC, along with SC response to engineered biomaterials, may inform strategies to enhance nerve regeneration. Rat SC were cultured on laminin-coated microgrooved poly(dimethyl siloxane) platforms that were flat or presented repeating cellular scale anisotropic topographical cues, 30 or 60 µm in width, and observed with timelapse microscopy. SC motion was directed parallel to the long axis of the topography on both the groove floor and the plateau, with accompanying differences in velocity and directional persistence in comparison to SC motion on flat substrates. In addition, feature dimension affected SC morphology, alignment, and directional persistence. Plateaus and groove floors presented distinct cues which promoted differential motility and variable interaction with the topographical features. SC on the plateau surfaces tended to have persistent interactions with the edge topography, while SC on the groove floors tended to have infrequent contact with the corners and walls. Our observations suggest the capacity of SC to be guided without continuous contact with a topographical cue. SC exhibited a range of distinct motile morphologies, characterized by their symmetry and number of extensions. Across all conditions, SC with a single extension traveled significantly faster than cells with more or no extensions. We conclude that SC motility is complex, where persistent motion requires cellular asymmetry, and that anisotropic topography with cellular scale features can direct SC motility. PMID:21949703
Fan, Rachel; Chan, Tommy Cy; Prakash, Gaurav; Jhanji, Vishal
Corneal imaging is essential for diagnosing and management of a wide variety of ocular diseases. Corneal topography is used to characterize the shape of the cornea, specifically, the anterior surface of the cornea. Most corneal topographical systems are based on Placido disc that analyse rings that are reflected off the corneal surface. The posterior corneal surface cannot be characterized using Placido disc technology. Imaging of the posterior corneal surface is useful for diagnosis of corneal ectasia. Unlike corneal topographers, tomographers generate a three-dimensional recreation of the anterior segment and provide information about the corneal thickness. Scheimpflug imaging is one of the most commonly used techniques for corneal tomography. The cross-sectional images generated by a rotating Scheimpflug camera are used to locate the anterior and posterior corneal surfaces. The clinical uses of corneal topography include, diagnosis of corneal ectasia, assessment of corneal astigmatism, and refractive surgery planning. This review will discuss the applications of corneal topography and tomography in clinical practice. © 2017 Royal Australian and New Zealand College of Ophthalmologists.
Hergarten, S.; Wagner, T.; Stüwe, K.
The European Alps are one of the best studied mountain ranges on Earth, but yet the age of their topography is almost unknown. Even their relative stage of evolution is unclear: Are the Alps still growing, in a steady state or already decaying, and is there a significant difference between Western and Eastern Alps? Using a new geomorphic parameter we analyze the topography of the Alps and provide one of the first quantitative constraints demonstrating that the range is still in its infancy: In contrast to several other mountain ranges, the Alps have still more than half of their evolution to a geomorphic steady state to go. Combining our results with sediment budget data from the surrounding basins we infer that the formation of the present topography began only 5-6 million years ago. Our results question the apparent consensus that the topographic evolution is distributed over much of the Miocene and might give new impulses to the reconstruction of paleoclimate in Central Europe.
Diamant, H.; Witten, T. A.; Ege, C.; Gopal, A.; Lee, K. Y. C.
We theoretically study the topography of a biphasic surfactant monolayer in the vicinity of domain boundaries. The differing elastic properties of the two phases generally lead to a nonflat topography of 'mesas,' where domains of one phase are elevated with respect to the other phase. The mesas are steep but low, having heights of up to 10 nm. As the monolayer is laterally compressed, the mesas develop overhangs and eventually become unstable at a surface tension of about K(δc 0 ) 2 (δc 0 being the difference in spontaneous curvature and K a bending modulus). In addition, the boundary is found to undergo a topography-induced rippling instability upon compression, if its line tension is smaller than about Kδc 0 . The effect of diffuse boundaries on these features and the topographic behavior near a critical point are also examined. We discuss the relevance of our findings to several experimental observations related to surfactant monolayers: (i) small topographic features recently found near domain boundaries; (ii) folding behavior observed in mixed phospholipid monolayers and model lung surfactants; (iii) roughening of domain boundaries seen under lateral compression; (iv) the absence of biphasic structures in tensionless surfactant films
Francis, E. J.; Asner, G. P.
Spatial variability of water in forests is a function of both climatic gradients that control water inputs and topo-edaphic variation that determines the flows of water belowground, as well as interactions of climate with topography. Coastal redwood forests are hydrologically unique because they are influenced by coastal low clouds, or fog, that is advected onto land by a strong coastal-to-inland temperature difference. Where fog intersects the land surface, annual water inputs from summer fog drip can be greater than that of winter rainfall. In this study, we take advantage of mapped spatial gradients in forest canopy water storage, topography, and fog cover in California to better understand the roles and interactions of fog and topography in the hydrology of redwood forests. We test a conceptual model of redwood forest hydrology with measurements of canopy water content derived from high-resolution airborne imaging spectroscopy, topographic variables derived from high-resolution LiDAR data, and fog cover maps derived from NASA MODIS data. Landscape-level results provide insight into hydrological processes within redwood forests, and cross-site analyses shed light on their generality.
Chung, Sangkeun; Kim, Sun S; Kini, Nisha; Fang, Hua J; Kalman, David; Ziedonis, Douglas M
This is the first study of Korean Americans' smoking behavior using a topography device. Korean American men smoke at higher rates than the general U.S. Korean American and White men were compared based on standard tobacco assessment and smoking topography measures. They smoked their preferred brand of cigarettes ad libitum with a portable smoking topography device for 24 h. Compared to White men (N = 26), Korean American men (N = 27) were more likely to smoke low nicotine-yield cigarettes (p Whites. Controlling for the number of cigarettes smoked, Koreans smoked with higher average puff flows (p = 0.05), greater peak puff flows (p = 0.02), and shorter interpuff intervals (p Whites. Puff counts, puff volumes, and puff durations did not differ between the two groups. This study offers preliminary insight into unique smoking patterns among Korean American men who are likely to smoke low nicotine-yield cigarettes. We found that Korean American men compensated their lower number and low nicotine-yield cigarettes by smoking with greater puff flows and shorter interpuff intervals than White men, which may suggest exposures to similar amounts of nicotine and harmful tobacco toxins by both groups. Clinicians will need to consider in identifying and treating smokers in a mutually aggressive manner, irrespective of cigarette type and number of cigarette smoked per day.
Dell, R. W.
Diffusive bottom boundary layers can produce upslope flows in a stratified fluid. Accumulating observations suggest that these boundary layers may drive upwelling and mixing in mid-ocean ridge flank canyons. However, most studies of diffusive bottom boundary layers to date have concentrated on constant bottom slopes. We present a study of how diffusive boundary layers interact with various idealized topography, such as changes in bottom slope, slopes with corrugations and isolated sills. We use linear theory and numerical simulations in the regional ocean modeling system (ROMS) model to show changes in bottom slope can cause convergences and divergences within the boundary layer, in turn causing fluid exchanges that reach far into the overlying fluid and alter stratification far from the bottom. We also identify several different regimes of boundary-layer behaviour for topography with oceanographically relevant size and shape, including reversing flows and overflows, and we develop a simple theory that predicts the regime boundaries, including what topographies will generate overflows. As observations also suggest there may be overflows in deep canyons where the flow passes over isolated bumps and sills, this parameter range may be particularly significant for understanding the role of boundary layers in the deep ocean.
Neural cells are the smallest building blocks of the central and peripheral nervous systems. Information in neural networks and cell-substrate interactions have been heretofore studied separately. Understanding whether surface nano-topography can direct nerve cells assembly into computational efficient networks may provide new tools and criteria for tissue engineering and regenerative medicine. In this work, we used information theory approaches and functional multi calcium imaging (fMCI) techniques to examine how information flows in neural networks cultured on surfaces with controlled topography. We found that substrate roughness Sa affects networks topology. In the low nano-meter range, S-a = 0-30 nm, information increases with Sa. Moreover, we found that energy density of a network of cells correlates to the topology of that network. This reinforces the view that information, energy and surface nano-topography are tightly inter-connected and should not be neglected when studying cell-cell interaction in neural tissue repair and regeneration.
Full Text Available As part of the growth of interdisciplinary studies, a number of recent writings have focused upon links between music and literature in the long nineteenth century. In addition to the general significance of music in the work of individual authors and poets, scholars have highlighted particular imagery used in the literary representation of music (charting its effect on narrative and characterisation, and explored the literary reception of several composers. Within this growing body of literature, references to nineteenth- and early twentieth-century British music are significant by their absence. This article therefore aims to redress the balance by suggesting that there are connections between British music and literature in this period, and that these connections are significant. A number of approaches are discussed to highlight their potential, including composer-author affinities, collaborations, generic parallels, hidden narratives, and the suggestion that musical settings of texts can represent critical ‘readings' of those texts. A range of examples (with musical illustrations and sound clips suggest how this particular interdisciplinary focus can lead to the reassessment of individual musical and literary works, and help to explore wider cultural connections within the Victorian and Edwardian era.
This report reviews the accounts for British Coal from March 30, 1986 to March 28, 1987 with respect to the coal industry in the United Kingdom. The dramatic increases in production and decreases in manpower and collieries have led to many changes and these are discussed. Areas covered include: objectives and relations with public bodies; finance; production; markets; personnel; organization; British Coal Enterprise Limited; research and development; environmental issues; and annual statistics. The full company accounts are also presented.
Poueymirou, Margaux Lynn Rosa
“The Sixth Sense: Synaesthesia and British Aestheticism 1860-1900” is an interdisciplinary examination of the emergence of synaesthesia conceptually and rhetorically within the ‘art for art’s sake’ movement in mid-to-late Victorian Britain. Chapter One investigates Swinburne’s focal role as both theorist and literary spokesman for the nascent British Aesthetic movement. I argue that Swinburne was the first to practice what Pater meant by ‘aesthetic criticism’ and that synaesthe...
The Business Council provided its comments concerning the Kyoto Protocol and climate change to the government of British Columbia, recommending that a clear position be established quickly on the matter. The adopted position should also be disseminated broadly to allow stake holders sufficient time to prepare for the upcoming meetings of the Joint Ministers and First Ministers. The federal government has announced that the decision on whether to ratify the Kyoto Protocol will be made before the end of 2002, and this decision will have numerous effects on the people of British Columbia, businesses, workers, and consumers alike. The Business Council of British Columbia believes that the unique interests of the province can best be protected by a proactive approach. Actions plans are being prepared by several of the other provinces and territories, who have already stated their position concerning the Kyoto Protocol. The long-term risks of climate change for British Columbia have not been determined nor have the elements of a provincial approach. The following elements should be included in British Columbia's position on the Kyoto Protocol, according to the Business Council of British Columbia: (1) a credible and cost-effective implementation plan that does not unduly burden the province and other jurisdictions must be developed before Canada decides to ratify the Protocol. British Columbia should go on the record stating it does not support the ratification of the Kyoto Protocol in its present form. (2) the province should advocate for a national approach to climate change that can be achieved within a reasonable time frame, reflects the long-term nature of the problem, and is in agreement with the economic development objectives of British Columbia, (3) a plan detailing how the province intends to deal with the growth of greenhouse gas emissions should supplement and support the position of the province on the Kyoto Protocol. Consumers and business should be engaged
"This report has provided a brief outline of business immigration to Canada and to British Columbia from several source countries in the Asian Pacific Rim. The importance of business immigration to Canada in general, and British Columbia in particular, is [examined].... Even with the limited data currently available, this brief study indicates a very high statistical relationship between business immigration and other less formal and less permanent movements of people such as student flows and visitors." excerpt
Full Text Available This communiqué provides a summary of the production- and consumption-based greenhouse gas emissions accounts for British Columbia, as well as their associated trade flows. It is part of a series of communiqués profiling the Canadian provinces and territories.1 In simplest terms, a production-based emissions account measures the quantity of greenhouse gas emissions produced in British Columbia. In contrast, a consumptionbased emissions account measures the quantity of greenhouse gas emissions generated during the production process for final goods and services that are consumed in British Columbia through household purchases, investment by firms and government spending. Trade flows refer to the movement of emissions that are produced in British Columbia but which support consumption in a different province, territory or country (and vice versa. For example, emissions at the Port of Vancouver that are associated with goods that are subsequently exported to Ontario for sale are recorded as a trade flow from British Columbia to Ontario. Moving in the opposite direction, emissions associated with the production of Alberta crude oil that is refined in British Columbia and sold as motor gasoline to a British Columbia consumer are recorded as a trade flow from Alberta to British Columbia. For further details on these results in a national context, the methodology for generating them and their policy implications, please see the companion papers to this communiqué series: (1 Fellows and Dobson (2017; and (2 Dobson and Fellows (2017. Additionally, the consumption emissions and trade flow data for each of the provinces and territories are available at: http://www.policyschool.ca/embodied-emissions-inputs-outputs-datatables-2004-2011/.
Full Text Available The issues of British national identity and social cohesion have become pressing concerns within the multicultural fabric of contemporary British society. The increasing number of immigrants and their offspring, along with the maintenance of their cultural roots, seem to represent a serious defiance to social cohesion and the alleged “purity” of Britishness. A number of race related reports were produced by the official authorities to churn out the necessary steps to be followed by the British (immigrants and host community in order to keep social stability and community cohesion. Thus, the politics of community cohesion came to the fore as the neologism of contemporary British political discourse. Such new discourse of governance has been digested and processed differently by different mass media. It has been decoded, for instance, preferably by mainstream news agencies like BBC News Online. However, arguably, it is read appositionally or at best negotiatedly by ethnicity-related news agencies such as Muslim News Online. In this article, attempt has been made to adopt media discourse analysis tools to decipher the ways Muslim News Online decoded and then encoded the hegemonic official discourses of Britishness and community cohesion. A critical and interpretative approach is used to accomplish such study. The corpus of this study is primarily extracted from the website of the Muslim News Online.
Mohsen M. Saleh
Full Text Available The essence of the British military and security formula in Palestine was the smooth establishment of the Jewish national home with minimum costs of lives and money. However, this British pro-Zionist policy created a continuous security problem, and opened the door to all possibilities of Palestinian revolts and uprisings of both national and religious nature. The British were very active in disarming the Arabs and adopted stringent measures to crush their uprisings and revolts. But, they turned a blind eye to the Jewish arms smuggling and Jewish military organizations, especially, the Hagana, which later became the backbone of the Israeli Army. During Palestinian uprisings of 1920, 1921 and 1929 against the Zionists, most of the Palestinian casualties were inflicted by the British forces despite the fact that the Palestinians avoided attacking the British. The British-Zionist cooperation reached its peak during the Palestinian revolt of 1936-1939, and took different forms, including allowing the Jews to establish a military force of twenty two thousand men under the pretext of protecting the Jewish community.
The barotropic tide interacts with seafloor topography to generate internal gravity waves. Equations for streamfunction and power conversion are derived in terms of integrals over the topography in spatial coordinates. The slope of the topography does not need to be small. Explicit equations are derived up to second order in slope for general topography, and conversion by a bell-shaped topography is calculated analytically to this order. A concise formalism using Hilbert transforms is developed, the minimally converting topographic shape is discussed, and a numerical scheme for the evaluation of power conversion is designed that robustly deals with the singular integrand.
Behar, Rachel Z.; Hua, My; Talbot, Prue
Background Prior electronic cigarette (EC) topography data are based on two video analyses with limited parameters. Alternate methods for measuring topography are needed to understand EC use and nicotine intake. Objectives This study evaluated EC topography with a CReSS Pocket device and quantified nicotine intake. Methods Validation tests on pressure drop, flow rate, and volume confirmed reliable performance of the CReSS Pocket device. Twenty participants used Blu Cigs and V2 Cigs for 10 minute intervals with a 10–15 minute break between brands. Brand order was reversed and repeated within 7 days Data were analyzed to determine puff duration, puff count, volume, flow rate, peak flow, and inter-puff interval. Nicotine intake was estimated from cartomizer fluid consumption and topography data. Results Nine patterns of EC use were identified. The average puff count and inter-puff interval were 32 puffs and 17.9 seconds. All participants, except one, took more than 20 puffs/10 minutes. The averages for puff duration (2.65 seconds/puff), volume/puff (51ml/puff), total puff volume (1,579 ml), EC fluid consumption (79.6 mg), flow rate (20 ml/s), and peak flow rate (27 ml/s) were determined for 10-minute sessions. All parameters except total puff count were significantly different for Blu versus V2 EC. Total volume for Blu versus V2 was four-times higher than for conventional cigarettes. Average nicotine intake for Blu and V2 across both sessions was 1.2 ± 0.5 mg and 1.4 ± 0.7 mg, respectively, which is similar to conventional smokers. Conclusions EC puffing topography was variable among participants in the study, but often similar within an individual between brands or days. Puff duration, inter-puff interval, and puff volume varied from conventional cigarette standards. Data on total puff volume and nicotine intake are consistent with compensatory usage of EC. These data can contribute to the development of a standard protocol for laboratory testing of EC products
Rachel Z Behar
Full Text Available Prior electronic cigarette (EC topography data are based on two video analyses with limited parameters. Alternate methods for measuring topography are needed to understand EC use and nicotine intake.This study evaluated EC topography with a CReSS Pocket device and quantified nicotine intake.Validation tests on pressure drop, flow rate, and volume confirmed reliable performance of the CReSS Pocket device. Twenty participants used Blu Cigs and V2 Cigs for 10 minute intervals with a 10-15 minute break between brands. Brand order was reversed and repeated within 7 days Data were analyzed to determine puff duration, puff count, volume, flow rate, peak flow, and inter-puff interval. Nicotine intake was estimated from cartomizer fluid consumption and topography data.Nine patterns of EC use were identified. The average puff count and inter-puff interval were 32 puffs and 17.9 seconds. All participants, except one, took more than 20 puffs/10 minutes. The averages for puff duration (2.65 seconds/puff, volume/puff (51 ml/puff, total puff volume (1,579 ml, EC fluid consumption (79.6 mg, flow rate (20 ml/s, and peak flow rate (27 ml/s were determined for 10-minute sessions. All parameters except total puff count were significantly different for Blu versus V2 EC. Total volume for Blu versus V2 was four-times higher than for conventional cigarettes. Average nicotine intake for Blu and V2 across both sessions was 1.2 ± 0.5 mg and 1.4 ± 0.7 mg, respectively, which is similar to conventional smokers.EC puffing topography was variable among participants in the study, but often similar within an individual between brands or days. Puff duration, inter-puff interval, and puff volume varied from conventional cigarette standards. Data on total puff volume and nicotine intake are consistent with compensatory usage of EC. These data can contribute to the development of a standard protocol for laboratory testing of EC products.
Champagnac, Jean-Daniel; Herman, Frédéric; Valla, Pierre
The examination of the relationship between Earth's topography and present and past climate (i.e., long-term elevation of glaciers Equilibrium Line Altitude) reveals that the elevation of mountain ranges may be limited or controlled by glaciations (e.g. Porter, 1989). This is of prime importance, because glacial condition would lead to a limit the mountain development, hence the accumulation of gravitational energy and prevent the development of further glacial conditions as well as setting the erosion in (peri)glacial environments. In this study, we examine the relationships between topography and the global Equilibrium Line Altitude of alpine glaciers around the world (~ long term snowline, i.e. the altitude where the ice mass balance is null). This analysis reinforce a global study previously published (Champagnac et al., 2012), and provide a much finer view of the climate-topography-tectonics relationships. Specifically, two main observations can be drawn: 1) The distance between the (averaged and maximum) topography, and the ELA decreases pole ward the poles, and even become reversed (mean elevation above to ELA) at high latitude. Correlatively, the elevation of very large portion of land at mid-latitude cannot be related to glaciations, simply because it was never glaciated (large distance between topography and long-term mean ELA). The maximum distance between the ELA and the topography is greater close to the equator and decreases poleward. In absence of glacial and periglacial erosion, this trend cannot have its origin in glacial and periglacial processes. Moreover, the ELA elevation shows a significant (1000~1500m) depression in the intertropical zone. This depression of the ELA is not reflected at all in the topography 2) The distribution of relief on Earth, if normalized by the mean elevation of mountain ranges (as a proxy for available space to create relief, see Champagnac et al., 2012 for details) shows a latitudinal band of greater relief between
Leach, Richard; Evans, Christopher; He, Liangyu; Davies, Angela; Duparré, Angela; Henning, Andrew; Jones, Christopher W; O’Connor, Daniel
Control of surface topography has always been of vital importance for manufacturing and many other engineering and scientific disciplines. However, despite over one hundred years of quantitative surface topography measurement, there are still many open questions. At the top of the list of questions is ‘Are we getting the right answer?’ This begs the obvious question ‘How would we know?’ There are many other questions relating to applications, the appropriateness of a technique for a given scenario, or the relationship between a particular analysis and the function of the surface. In this first ‘open questions’ article we have gathered together some experts in surface topography measurement and asked them to address timely, unresolved questions about the subject. We hope that their responses will go some way to answer these questions, address areas where further research is required, and look at the future of the subject. The first section ‘Spatial content characterization for precision surfaces’ addresses the need to characterise the spatial content of precision surfaces. Whilst we have been manufacturing optics for centuries, there still isn’t a consensus on how to specify the surface for manufacture. The most common three methods for spatial characterisation are reviewed and compared, and the need for further work on quantifying measurement uncertainties is highlighted. The article is focussed on optical surfaces, but the ideas are more pervasive. Different communities refer to ‘figure, mid-spatial frequencies, and finish’ and ‘form, waviness, and roughness’, but the mathematics are identical. The second section ‘Light scattering methods’ is focussed on light scattering techniques; an important topic with in-line metrology becoming essential in many manufacturing scenarios. The potential of scattering methods has long been recognized; in the ‘smooth surface limit’ functionally significant relationships can be derived from first
Full Text Available Though not its main focus, Goldstone's Revolution and Rebellion in the Early Modern World (1991 threw considerable new light on 19th century Europe's revolutions and near-revolutions. While Goldstone stresses the role of an expanding and industrializing economy in absorbing 19th century England's demographic shocks, we accept this analysis but argue alongside it for similar attention to the vector of emigration, settler-colonialism, and imperial state expansion into which at least some of the exhaust fumes of the population explosion were vented. Furthermore, it is important to note the crucial role of a highly interventionist state and 'big' government in the background to these dynamics—a far cry from the light-touch, laissez-faire qualities with which the 19th century British state is often associated. To make our case, this article takes advantage of secondary literature and raw data not available prior to the publication of Goldstone's book. Of crucial importance here is our unique dataset of fatality-inducing political violence events in Britain and Ireland from 1785 to 1900. This is the first research paper to utilise this dataset. We draw upon this in the following section, which seeks to establish what the real level of political instability was in 19th century Britain—thus cross-referencing Goldstone's account with more recent data—before moving on in the following section to a more detailed overview of the socio-economic conditions underlying events at the political level. This is followed by our account of the emigration-settler-colonialism-imperial state expansion vector and the interventionist state policy behind it, which we argue was crucial to making 19th century Britain relatively 'revolution-proof'—alongside the expanding economic opportunities rightly highlighted by Goldstone. Lastly come our brief concluding remarks, which lay out the implications, as we see them, of this article's findings for research on
Zhao, Guangcui; Sun, Tianxi; Liu, Zhiguo; Yuan, Hao; Li, Yude; Liu, Hehe; Zhao, Weigang; Zhang, Ruixia; Min, Qin; Peng, Song
A confocal micro-X-ray fluorescence (MXRF) technology based on polycapillary X-ray optics was proposed for determining surface topography. This confocal topography method involves elemental sensitivity and can be used to classify the objects according to their elemental composition while obtaining their surface topography. To improve the spatial resolution of this confocal topography technology, the center of the confocal micro-volume was overlapped with the output focal spot of the polycapillary X-ray, focusing the lens in the excitation channel. The input focal spot of the X-ray lens parallel to the detection channel was used to determine the surface position of the sample. The corresponding surface adaptive algorithm was designed to obtain the surface topography. The surface topography of a ceramic chip was obtained. This confocal MXRF surface topography method could find application in the materials sciences
Patel, Neesha R; Kennedy, Anne; Blickem, Christian; Reeves, David; Chew-Graham, Carolyn
Diabetes is disproportionately high among British South Asians compared to the general UK population. Whilst the migrant British South Asians group has received most attention on research related to diabetes management, little consideration has been given to impact of travel back to the East. This study aimed to explore the role of social networks and beliefs about diabetes in British South Asians, to better understand their management behaviours whilst holidaying in the East. Semistructured interviews were conducted in Greater Manchester. Forty-four participants were recruited using random and purposive sampling techniques. Interviews were analysed thematically using a constant comparison approach. Migrant British South Asians expressed a strong preference to be in a hot climate; they felt they had a healthier lifestyle in the East and often altered or abandoned their diabetes medication. Information acquisition on diabetes and availability of social networks in the East was valued. Social networks in the East are a valued source of information and support for diabetes. The lack of adherence to medication whilst abroad suggests that some migrant British South Asians have a poor understanding of diabetes. Future research needs to explore whether patients are seeking professional advice on diabetes management prior to their extended holiday.
Okosieme, Onyebuchi; Gilbert, Jackie; Abraham, Prakash; Boelaert, Kristien; Dayan, Colin; Gurnell, Mark; Leese, Graham; McCabe, Christopher; Perros, Petros; Smith, Vicki; Williams, Graham; Vanderpump, Mark
The management of primary hypothyroidism with levothyroxine (L-T4) is simple, effective and safe, and most patients report improved well-being on initiation of treatment. However, a proportion of individuals continue to suffer with symptoms despite achieving adequate biochemical correction. The management of such individuals has been the subject of controversy and of considerable public interest. The American Thyroid Association (ATA) and the European Thyroid Association (ETA) have recently published guidelines on the diagnosis and management of hypothyroidism. These guidelines have been based on extensive reviews of the medical literature and include sections on the role of combination therapy with L-T4 and liothyronine (L-T3) in individuals who are persistently dissatisfied with L-T4 therapy. This position statement by the British Thyroid Association (BTA) summarises the key points in these guidelines and makes recommendations on the management of primary hypothyroidism based on the current literature, review of the published positions of the ETA and ATA, and in line with best principles of good medical practice. The statement is endorsed by the Association of Clinical Biochemistry, (ACB), British Thyroid Foundation, (BTF), Royal College of Physicians (RCP) and Society for Endocrinology (SFE). © 2015 John Wiley & Sons Ltd.
Siddiqui, B M; Patel, M S; Rudge, S; Best, A; Mangwani, J
Introduction Venous thromboembolism (VTE) remains a major public health issue around the world. Ethnicity is known to alter the incidence of VTE. To our knowledge, there are no reports in the literature investigating the incidence of VTE in British Indians. The aim of this study was to investigate the rates of symptomatic VTE in British Indian patients in the UK. Methods Patients referred to our institution between January 2011 and August 2013 with clinically suspected VTE were eligible for inclusion in the study. Those not of British Indian or Caucasian ethnicity were excluded. A retrospective review of these two cohorts was conducted. Results Overall, 15,529 cases were referred to our institution for suspected VTE. This included 1,498 individuals of British Indian ethnicity. Of these, 182 (12%) had confirmed VTE episodes. A further 13,159 of the patients with suspected VTE were coded as Caucasian, including 2,412 (16%) who had confirmed VTE events. VTE rates were a third lower in British Indians with clinically suspected VTE than in the equivalent Caucasian group. The British Indian cohort presented with VTE at a much earlier age than Caucasians (mean 57.0 vs 68.0 years). Conclusions This study suggests that British Indian patients have a lower incidence of VTE and are more likely to present at an earlier age than Caucasians. There was no significant difference in VTE type (deep vein thrombosis vs pulmonary embolism) among the ethnic groups. Clinicians should be aware of variations within ethnicities but should continue to adhere to existing VTE prevention guidance.
This research looks at the factors motivating Gambian-British and Nigerian-British parents to send their children "back" to West Africa and what this means for parents, children and families on both continents.
Neish, C.; Kirk, R.; Lorenz, R.; Bray, V.; Schenk, P.; Stiles, B.; Turtle, E.; Cassini Radar Team
Unique among the icy satellites, Titan’s surface shows evidence for extensive modification by fluvial and aeolian erosion, which act to change the topography of its surface over time. Quantifying the extent of this landscape evolution is difficult, since the original, ‘non-eroded’ surface topography is generally unknown. However, fresh craters on icy satellites have a well-known shape and morphology, which has been determined from extensive studies on the airless worlds of the outer solar system (Schenk et al., 2004). By comparing the topography of craters on Titan to similarly sized, pristine analogues on airless bodies, we can obtain one of the few direct measures of the amount of erosion that has occurred on Titan. Cassini RADAR has imaged >30% of the surface of Titan, and more than 60 potential craters have been identified in this data set (Wood et al., 2010; Neish and Lorenz, 2012). Topographic information for these craters can be obtained from a technique known as ‘SARTopo’, which estimates surface heights by comparing the calibration of overlapping synthetic aperture radar (SAR) beams (Stiles et al., 2009). We present topography data for several craters on Titan, and compare the data to similarly sized craters on Ganymede, for which topography has been extracted from stereo-derived digital elevation models (Bray et al., 2012). We find that the depths of craters on Titan are generally within the range of depths observed on Ganymede, but several hundreds of meters shallower than the average (Fig. 1). A statistical comparison between the two data sets suggests that it is extremely unlikely that Titan’s craters were selected from the depth distribution of fresh craters on Ganymede, and that is it much more probable that the relative depths of Titan are uniformly distributed between ‘fresh’ and ‘completely infilled’. This is consistent with an infilling process that varies linearly with time, such as aeolian infilling. Figure 1: Depth of
Chung, Sangkeun; Kim, Sun S; Kini, Nisha; Fang, Hua J; Kalman, David; Ziedonis, Douglas M.
Introduction This is the first study of Korean Americans’ smoking behavior using a topography device. Korean American men smoke at higher rates than the general U.S. population. Methods Korean American and White men were compared based on standard tobacco assessment and smoking topography measures. They smoked their preferred brand of cigarettes ad libitum with a portable smoking topography device for 24 hours. Results Compared to White men (N = 26), Korean American men (N = 27) were more likely to smoke low nicotine-yield cigarettes (p < 0.001) and have lower Fagerstrom nicotine dependence scores (p = 0.04). Koreans smoked fewer cigarettes with the device (p = 0.01) than Whites. Controlling for the number of cigarettes smoked, Koreans smoked with higher average puff flows (p = 0.05), greater peak puff flows (p = 0.02), and shorter interpuff intervals (p < 0.001) than Whites. Puff counts, puff volumes, and puff durations did not differ between the two groups. Conclusions This study offers preliminary insight into unique smoking patterns among Korean American men who are likely to smoke low nicotine-yield cigarettes. We found that Korean American men compensated their lower number and low nicotine-yield cigarettes by smoking more frequently with greater puff flows than White men, which may suggest exposures to similar amounts of nicotine and harmful tobacco toxins by both groups. Clinicians will need to consider in identifying and treating smokers in a mutually aggressive manner, irrespective of cigarette type and number of cigarette smoked per day. PMID:24068611
Campbell, S. M.; Moucha, R.; Raymo, M. E.; Derry, L. A.
The carbonate compensation depth (CCD), the ocean depth at which the calcium carbonate accumulation rate goes to zero, can provide valuable insight into climatic and weathering conditions over the Cenozoic. The paleoposition of the CCD can be inferred from sediment core data. As the carbonate accumulation rate decreases linearly with depth between the lysocline and CCD, the CCD can be calculated using a linear regression on multiple sediment cores with known carbonate accumulation rates and paleodepths. It is therefore vital to have well-constrained estimates of paleodepths. Paleodepths are typically calculated using models of thermal subsidence and sediment loading and compaction. However, viscous convection-related stresses in the mantle can warp the ocean floor by hundreds of meters over broad regions and can also vary significantly over millions of years. This contribution to paleobathymetry, termed dynamic topography, can be calculated by modeling mantle flow backwards in time. Herein, we demonstrate the effect dynamic topography has on the inference of the late Cenozoic CCD with an example from the equatorial Pacific, considering sites from IODP Expeditions 320/321. The equatorial Pacific, given its large size and high productivity, is closely tied to the global carbon cycle. Accordingly, long-term changes in the equatorial Pacific CCD can be considered to reflect global changes in weathering fluxes and the carbon cycle, in addition to more regional changes in productivity and thermohaline circulation. We find that, when the dynamic topography contribution to bathymetry is accounted for, the equatorial Pacific CCD is calculated to be appreciably shallower at 30 Ma than previous estimates would suggest, implying a greater deepening of the Pacific CCD over the late Cenozoic.
Cagua, Edgar F.
Acoustic telemetry is an increasingly common tool for studying the movement patterns, behavior and site fidelity of marine organisms, but to accurately interpret acoustic data, the variability, periodicity and range of detectability between acoustic tags and receivers must be understood. The relative and interactive effects of topography with biological and environmental noise have not been quantified on coral reefs. We conduct two long-term range tests (1- and 4-month duration) on two different reef types in the central Red Sea to determine the relative effect of distance, depth, topography, time of day, wind, lunar phase, sea surface temperature and thermocline on detection probability. Detectability, as expected, declines with increasing distance between tags and receivers, and we find average detection ranges of 530 and 120 m, using V16 and V13 tags, respectively, but the topography of the reef can significantly modify this relationship, reducing the range by ~70 %, even when tags and receivers are in line-of-sight. Analyses that assume a relationship between distance and detections must therefore be used with care. Nighttime detection range was consistently reduced in both locations, and detections varied by lunar phase in the 4-month test, suggesting a strong influence of biological noise (reducing detection probability up to 30 %), notably more influential than other environmental noises, including wind-driven noise, which is normally considered important in open-water environments. Analysis of detections should be corrected in consideration of the diel patterns we find, and range tests or sentinel tags should be used for more than 1 month to quantify potential changes due to lunar phase. Some studies assume that the most usual factor limiting detection range is weather-related noise; this cannot be extrapolated to coral reefs. © 2013 Springer-Verlag Berlin Heidelberg.
Voloudakis, G E; Baltatzis, G E; Agnantis, N J; Arnogianaki, N; Misitzis, J; Voloudakis-Baltatzis, I
Mucinous carcinoma of the breast (MCB) is histologically classified into 2 groups: (1) pure MCB and (2) mixed MCB. Pure MCB carries a better diagnosis than mixed MCB. This research relates to the cell surface topography and ultrastructure of the cells in the above cases and aims to find the differences between them, by means of two methods: scanning electron microscopy (SEM) and transmission electron microscopy (TEM). For the SEM examination, it was necessary to initially culture the MCB tissues and then proceed with the usual SEM method. In contrast, for the TEM technique, MCB tissues were initially fixed followed by the classic TEM method. The authors found the topography of pure MCB cases to be without nodes. The cell membrane was smooth, with numerous pores and small ruffles that covered the entire cell. The ultrastructural appearance of the same cases was with a normal cell membrane containing abundant collagen fibers. They also had many small vesicles containing mucin as well as secretory droplets. In contrast the mixed MCB had a number of lymph nodes and their cell surface topography showed stronger changes such as microvilli, numerous blebs, ruffles and many long projections. Their ultrastructure showed very long microvilli with large cytoplasmic inclusions and extracellular mucin collections, electron-dense material vacuoles, and many important cytoplasmic organelles. An important fact is that mixed MCB also contains areas of infiltrating ductal carcinoma. These cells of the cytoplasmic organelles are clearly responsible for the synthesis, storage, and secretion of the characteristic mucin of this tumor type. Evidently, this abnormal mucin production and the abundance of secretory granules along with the long projections observed in the topographical structure might be responsible for transferring tumor cells to neighboring organs, thus being responsible for metastatic disease.
Laurent, François; Poccard-Chapuis, René; Plassin, Sophie; Pimentel Martinez, Gustavo
We present a 1:100,000 scale soil texture map of Paragominas county (Pará, Brazil), covering 19,330 km2. The method allows rapid production of a soil texture map of a large area where the strength of a duricrust controls the relief. It is based on an easily accessible explanatory variable, topography, which is represented using a Digital Elevation Model. The method makes it possible to map the spatial distribution of the texture of the topsoil layer. Modelling was complemented by field observ...
Andersen, Ole Baltazar; Olesen, Arne Vestergaard; Forsberg, René
From August 14, 2006–April 24, 2007 the Danish expedition called Galathea-3 circumnavigated the globe. The Danish Technical University, DTU space, participated in the expedition with two experiments on-board. From Perth in Australia to Copenhagen Denmark measurements of the exact position and mov...... to permanent currents in the ocean. Comparison with the DNSC08 mean dynamic topography derived from satellite altimetry across the Gulf Stream yields agreement on the 20 cm level, which is a very satisfactory preliminary result calling for further refinement of the technique....
Bonisteel-Cormier, J.M.; Nayegandhi, Amar; Plant, Nathaniel; Wright, C.W.; Nagle, D.B.; Serafin, K.S.; Klipp, E.S.
These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Kennedy Space Center, FL. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired on May 28, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed
DeBroff Brian M
Full Text Available Abstract Background Biometric procedures such as keratometry performed shortly after contact procedures like gonioscopy and applanation tonometry could affect the validity of the measurement. This study was conducted to understand the short-term effect of gonioscopy on corneal curvature measurements and surface topography based Simulated Keratometry and whether this would alter the power of an intraocular lens implant calculated using post-gonioscopy measurements. We further compared the effect of the 2-mirror (Goldmann and the 4-mirror (Sussman Gonioscopes. Methods A prospective clinic-based self-controlled comparative study. 198 eyes of 99 patients, above 50 years of age, were studied. Exclusion criteria included documented dry eye, history of ocular surgery or trauma, diabetes mellitus and connective tissue disorders. Auto-Keratometry and corneal topography measurements were obtained at baseline and at three follow-up times – within the first 5 minutes, between the 10th-15th minute and between the 20th-25th minute after intervention. One eye was randomized for intervention with the 2-mirror gonioscope and the other underwent the 4-mirror after baseline measurements. t-tests were used to examine differences between interventions and between the measurement methods. The sample size was calculated using an estimate of clinically significant lens implant power changes based on the SRK-II formula. Results Clinically and statistically significant steepening was observed in the first 5 minutes and in the 10–15 minute interval using topography-based Sim K. These changes were not present with the Auto-Keratometer measurements. Although changes from baseline were noted between 20 and 25 minutes topographically, these were not clinically or statistically significant. There was no significant difference between the two types of gonioscopes. There was greater variability in the changes from baseline using the topography-based Sim K readings
George, Mathew K; Kuriakose, Thomas; DeBroff, Brian M; Emerson, John W
Biometric procedures such as keratometry performed shortly after contact procedures like gonioscopy and applanation tonometry could affect the validity of the measurement. This study was conducted to understand the short-term effect of gonioscopy on corneal curvature measurements and surface topography based Simulated Keratometry and whether this would alter the power of an intraocular lens implant calculated using post-gonioscopy measurements. We further compared the effect of the 2-mirror (Goldmann) and the 4-mirror (Sussman) Gonioscopes. A prospective clinic-based self-controlled comparative study. 198 eyes of 99 patients, above 50 years of age, were studied. Exclusion criteria included documented dry eye, history of ocular surgery or trauma, diabetes mellitus and connective tissue disorders. Auto-Keratometry and corneal topography measurements were obtained at baseline and at three follow-up times - within the first 5 minutes, between the 10th-15th minute and between the 20th-25th minute after intervention. One eye was randomized for intervention with the 2-mirror gonioscope and the other underwent the 4-mirror after baseline measurements. t-tests were used to examine differences between interventions and between the measurement methods. The sample size was calculated using an estimate of clinically significant lens implant power changes based on the SRK-II formula. Clinically and statistically significant steepening was observed in the first 5 minutes and in the 10-15 minute interval using topography-based Sim K. These changes were not present with the Auto-Keratometer measurements. Although changes from baseline were noted between 20 and 25 minutes topographically, these were not clinically or statistically significant. There was no significant difference between the two types of gonioscopes. There was greater variability in the changes from baseline using the topography-based Sim K readings. Reversible steepening of the central corneal surface is produced by
Nayegandhi, Amar; Brock, John C.; Wright, C. Wayne; Segura, Martha; Yates, Xan
These remotely sensed, geographically referenced elevation measurements of Lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Vicksburg National Military Park in Mississippi, acquired on September 12, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then
Brock, John C.; Nayegandhi, Amar; Wright, C. Wayne; Stevens, Sara; Yates, Xan
These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) and first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the George Washington Birthplace National Monument in Virginia, acquired on March 26, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL
Nayegandhi, Amar; Brock, John C.; Wright, C. Wayne; Miner, Michael D.; Michael, D.; Yates, Xan; Bonisteel, Jamie M.
These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the University of New Orleans (UNO), Pontchartrain Institute for Environmental Sciences (PIES), New Orleans, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Pearl River Delta in Louisiana and Mississippi, acquired March 9-11, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the
Smith, Kathryn E.L.; Nayegandhi, Amar; Wright, C. Wayne; Bonisteel, Jamie M.; Brock, John C.
These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. The purpose of this project is to provide highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired on June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using
Nayegandhi, Amar; Brock, John C.; Wright, C. Wayne; Miner, Michael D.; Yates, Xan; Bonisteel, Jamie M.
These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the University of New Orleans (UNO), Pontchartrain Institute for Environmental Sciences (PIES), New Orleans, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Pearl River Delta in Louisiana and Mississippi, acquired March 9-11, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the
Full Text Available The paper investigates the role of architecture, topography, and space for the religious communication and the creation of sacred space in the colonial Bolivian altiplano. It scrutinizes different forms and techniques of representation of Christian and Andean concepts in religious architectures, like churches and churchyards. Moreover, taking into account the case of the Andean town of Carabuco, its topographical characteristics, architectural artifacts and the representation of both in a visual source of the 17th century, it sheds new light on the processes of communication and appropriation of religious knowledge in a colonial contact zone.
In geodesy, coastal mean dynamic topography (MDT) was traditionally determined by spirit leveling technique. Advances in navigation satellite positioning (e.g., GPS) and geoid determination enable space-based leveling with an accuracy of about 3 cm at tide gauges. Recent CryoSat-2, a satellite altimetry mission with synthetic aperture radar (SAR) and SAR interferometric measurements, extends the space-based leveling to the coastal ocean with the same accuracy. However, barriers remain in applying the two space-based geodetic methods for MDT determination over the coastal ocean because current geoid modeling focuses primarily on land as a substitute to spirit leveling to realize the vertical datum.
Winter, J.M. Jr.; Green, R.E. Jr.; Corak, W.S.
The defect structure of gallium arsenide was investigated using white beam transmission topography. The samples were cut and polished monocrystal substrates from different suppliers. The goal of the work was to determine the viability of the method for documenting various crystallographic defect structures and establishing their effect on the performance of integrated microwave circuits fabricated on the wafers. The principles of the technique, essentially identical to classical Laue x-ray diffraction, are outlined. Two distinct defect structures were determined in the topographs. Reasons for the defect structures were postulated and the application of the method for quality control assessments of manufacturer-supplied gallium arsenide substrates was assessed
The development of roughness on ion bombarded surfaces (facets, ripples) on single crystalline and amorphous homogeneous solids plays an important role for example in depth profiling techniques. To verify a faceting mechanism based not only on sputtering by directly impinging ions but also on the contribution of reflected ions and the redeposition of sputtered material a computer simulation has been carried out. The surface in this model is treated as a two-dimensional line segment profile. The model describes the topography evolution on ion bombarded surfaces including the growth mechanism of a facetted surface, using only the interplay of reflected and primary ions and redeposited atoms.
Dixit, Vijay; Vyas, Chirag; Pataniya, Pratik; Jani, Mihir; Pathak, Vishal; Patel, Abhishek; Pathak, V. M.; Patel, K. D.; Solanki, G. K.
Tungsten Di-Selenide belongs to the family of TMDCs showing their potential applications in the fields of Optoelectronics and PEC solar cells. Here in the present investigation single crystals of WSe_2 were grown by Direct Vapour Transport Technique in a dual zone furnace having temperature difference of 50 K between the two zones. These single crystals were characterized by EDAX which confirms the stiochiometry of the grown crystals. Surface topography of the crystal was studied by optical micrograph showing the left handed spirals on the surface of WSe_2 crystals. Single crystalline nature of the crystals was confirmed by SAED.
Sokolov, V.N.; Fayazov, I.M.
The irradiated surface topography of polycrystalline silver was studied using the stereophotogrammetric method. The surface of silver was irradiated with 30 keV argon ions at variation for the ion incidence angle in interval of 0-80 deg relative to a surface normal. The influence of the inclination angle of the sample in the SEM on the cone shape of a SEM-picture of the irradiated surface is discussed. The parameters of cones on the irradiated surface of silver were measured by the SEM-stereomethod. The measurements of the sample section perpendicular to the incidence plane are also carried out
Smith, David E.; Zuber, Maria T.; Neumann, Gregory A.; Lemoine, Frank G.
Range measurements from the lidar instrument carried aboard the Clementine spacecraft have been used to produce an accurate global topographic model of the Moon. This paper discusses the function of the lidar; the acquisition, processing, and filtering of observations to produce a global topographic model; and the determination of parameters that define the fundamental shape of the Moon. Our topographic model: a 72nd degree and order spherical harmonic expansion of lunar radii, is designated Goddard Lunar Topography Model 2 (GLTM 2). This topographic field has an absolute vertical accuracy of approximately 100 m and a spatial resolution of 2.5 deg. The field shows that the Moon can be described as a sphere with maximum positive and negative deviations of approx. 8 km, both occurring on the farside, in the areas of the Korolev and South Pole-Aitken (S.P.-Aitken) basins. The amplitude spectrum of the topography shows more power at longer wavelengths as compared to previous models, owing to more complete sampling of the surface, particularly the farside. A comparison of elevations derived from the Clementine lidar to control point elevations from the Apollo laser altimeters indicates that measured relative topographic heights generally agree to within approx. 200 in over the maria. While the major axis of the lunar gravity field is aligned in the Earth-Moon direction, the major axis of topography is displaced from this line by approximately 10 deg to the cast and intersects the farside 24 deg north of the equator. The magnitude of impact basin topography is greater than the lunar flattening (approx. 2 km) and equatorial ellipticity (approx. 800 m), which imposes a significant challenge to interpreting the lunar figure. The floors of mare basins are shown to lie close to an equipotential surface, while the floors of unflooded large basins, except for S.P.-Aitken, lie above this equipotential. The radii of basin floors are thus consistent with a hydrostatic mechanism
Hu, Yong; Kwok, Jerry Weilun; Tse, Jessica Yuk-Hang; Luk, Keith Dip-Kei
Nonsurgical rehabilitation therapy is a commonly used strategy to treat chronic low back pain (LBP). The selection of the most appropriate therapeutic options is still a big challenge in clinical practices. Surface electromyography (sEMG) topography has been proposed to be an objective assessment of LBP rehabilitation. The quantitative analysis of dynamic sEMG would provide an objective tool of prognosis for LBP rehabilitation. To evaluate the prognostic value of quantitative sEMG topographic analysis and to verify the accuracy of the performance of proposed time-varying topographic parameters for identifying the patients who have better response toward the rehabilitation program. A retrospective study of consecutive patients. Thirty-eight patients with chronic nonspecific LBP and 43 healthy subjects. The accuracy of the time-varying quantitative sEMG topographic analysis for monitoring LBP rehabilitation progress was determined by calculating the corresponding receiver-operating characteristic (ROC) curves. Physiologic measure was the sEMG during lumbar flexion and extension. Patients who suffered from chronic nonspecific LBP without the history of back surgery and any medical conditions causing acute exacerbation of LBP during the clinical test were enlisted to perform the clinical test during the 12-week physiotherapy (PT) treatment. Low back pain patients were classified into two groups: "responding" and "nonresponding" based on the clinical assessment. The responding group referred to the LBP patients who began to recover after the PT treatment, whereas the nonresponding group referred to some LBP patients who did not recover or got worse after the treatment. The results of the time-varying analysis in the responding group were compared with those in the nonresponding group. In addition, the accuracy of the analysis was analyzed through ROC curves. The time-varying analysis showed discrepancies in the root-mean-square difference (RMSD) parameters between the
Full Text Available This article presents the results of historical research on the operation of British accounting firm Whin-ney, Murray & Co in Poland before World War II. Based on our findings this was the only foreign ac-counting firm active in Poland at that time. Following their clients, British accounting firms expanded their operations abroad at the turn of the 19th century. During the 1920s and 1930s the number of audit assignments on the European continent increased rapidly, which necessitated the establishment of branches (offices in major European cities and industrial districts. Whinney, Murray & Co set up an office in Warsaw in 1932 taking into account its convenient location as a base for undertaking audit assignments throughout the Eastern European region. The Warsaw office concentrated initially on inter-national clients active in Poland but was also engaged in audits of Polish power plants and participated as financial advisor in the electrification program of Polish railways with involvement of British investors. Whinney, Murray & Co contributed to the development of Polish-British economic cooperation before World War II. Its representative was one of the founders of the Polish-British Chamber of Commerce established in Warsaw in 1933.
Information is provided on the availability and cost of natural gas in British Columbia for use by firms interested in establishing gas-intensive industrial facilities in the province. British Columbia has an abundant supply of natural gas, originating mainly from deposits in the westernmost part of the Western Canadian Sedimentary Basin in the northeast part of the province. Recoverable resources in British Columbia are estimated at 1,000-1,400 billion m 3 . Over 200 producers compete to sell natural gas for both domestic and export markets. Gathering, processing, and transmission of the gas is undertaken mainly by the Westcoast Energy pipeline system, and distribution is undertaken by several distribution utilities. At present, all large industrial gas users buy their firm gas requirements directly from gas producers, often using gas marketers or brokers to assist in purchasing. Regulation of the gas industry is performed by the British Columbia Utilities Commission, which sets rules for energy supply contracts, and by the National Energy Board, which sets tolls for gathering, processing, and transporting gas. Factors affecting gas pricing are discussed, with reference to both the wellhead price and the cost of gathering, processing, and transportation. Firm gas costs for two hypothetical industrial loads in British Columbia are illustrated. Potential intensive uses of natural gas in the province are outlined, including power generation, liquefaction for export, manufacturing, production of direct reduced iron, and as petrochemical feedstocks. 5 figs., 2 tabs
Bang, Dong-Ho; Lim, Daekeon; Hwang, Wi-Sub; Park, Seong-Hoon; Jeong, Ok-man; Kang, Kyung Wook; Kang, Hohyung
The purposes of this study were to assess radiation exposure during low-dose chest CT by using lateral topography and to compare the lateral topographic findings with findings obtained with anteroposterior topography alone and anteroposterior and lateral topography combined. From November 2011 to February 2012, 210 male subjects were enrolled in the study. Age, weight, and height of the men were recorded. All subjects were placed into one of three subgroups based on the type of topographic image obtained: anteroposterior topography, lateral topography, and both anteroposterior and lateral topography. Imaging was performed with a 128-MDCT scanner. CT, except for topography, was the same for all subjects. A radiologist analyzed each image, recorded scan length, checked for any insufficiencies in the FOV, and calculated the effective radiation dose. One-way analysis of variance and multiple comparisons were used to compare the effective radiation exposure and scan length between groups. The mean scan length in the anteroposterior topography group was significantly greater than that of the lateral topography group and the combined anteroposterior and lateral topography group (p topography group (0.735 ± 0.033 mSv) was significantly lower than that for the anteroposterior topography group (0.763 ± 0.038 mSv) and the combined anteroposterior and lateral topography group (0.773 ± 0.038) (p < 0.001). Lateral topographic low-dose CT was associated with a lower effective radiation dose and scan length than either anteroposterior topographic low-dose chest CT or low-dose chest CT with both anteroposterior and lateral topograms.
Jerome, Lee; Clemitshaw, Gary
This research was prompted by the developing political discourse proposing the teaching of Britishness and British values in the context of the United Kingdom. This discourse will be reviewed in the first part of the article, in the context of previous work which has sought to assess how Britishness and related concepts might be promoted through…
W. G. Darling
Full Text Available The utility of stable isotopes as tracers of the water molecule has a long pedigree. The study reported here is part of an attempt to establish a comprehensive isotopic 'baseline' for the British Isles as background data for a range of applications. Part 1 of this study (Darling and Talbot, 2003 considered the isotopic composition of rainfall in Britain and Ireland. The present paper is concerned with the composition of surface waters and groundwater. In isotopic terms, surface waters (other than some upland streams are poorly characterised in the British Isles; their potential variability has yet to be widely used as an aid in hydrological research. In what may be the first study of a major British river, a monthly isotopic record of the upper River Thames during 1998 was obtained. This shows high damping of the isotopic variation compared to that in rainfall over most of the year, though significant fluctuations were seen for the autumn months. Smaller rivers such as the Stour and Darent show a more subdued response to the balance between runoff and baseflow. The relationship between the isotopic composition of rainfall and groundwater is also considered. From a limited database, it appears that whereas Chalk groundwater is a representative mixture of weighted average annual rainfall, for Triassic sandstone groundwater there is a seasonal selection of rainfall biased towards isotopically-depleted winter recharge. This may be primarily the result of physical differences between the infiltration characteristics of rock types, though other factors (vegetation, glacial history could be involved. In the main, however, groundwaters appear to be representative of bulk rainfall within an error band of 0.5‰ δ18O. Contour maps of the δ18O and δ2H content of recent groundwaters in the British Isles show a fundamental SW-NE depletion effect modified by topography. The range of measured values, while much smaller than those for rainfall, still covers
The first four months of the operation of British Energy as a privatised nuclear utility are briefly reviewed. Operational and financial performance have been good as exemplified by the figures for power output and financial return. Freedom from government control means that the options open to the company are much wider but the need to meet the expectations of shareholders is a major consideration. Added to this, the competitive nature of the electricity industry means that the cost reduction is important, though this cannot be at the expense of safety. Shareholder expectations make the funding of new nuclear power stations unrealistic at present. Increasingly, however, markets are opening up in the maintenance of existing plant and the decommissioning of older plant. The British Energy Group also has considerable expertise in the design, operation and management of power stations and of acting in a competitive energy market that could be exported. British Energy's International Division is in place to develop this potential. (UK)
The UK Minister for Science and Innovation, Ian Pearson MP, recently visited CERN. Ian Pearson, UK Minister for Science and Innovation (back row, third left), in the LHC tunnel with Peter Jenni, ATLAS Spokesperson (back row, centre), John Ellis (back row, third right), Simon Featherstone, UK Ambassador to Switzerland (back row, far left), Keith Mason, Chief Executive of STFC (the UK funding agency) (back row, second from right), and British scientists working at ATLAS.On the 15 April UK Minister for Science and Innovation, Ian Pearson, made his first trip to CERN. The UK is one of the founding Member States of CERN, and the British contingent is one of the largest of any country with around 650 British scientists and a further 250 staff members working here. After an introduction to the facilities by Director-General Robert Aymar, who expressed CERN’s gratitude for UK government support through its Science and Technology Facilitie...
When the Chairman and Chief Executive of British Gas was awarded a huge salary increase recently, a major revolt occurred amongst 4,000 of British Gas's small shareholders. The increase was awarded despite the intense opposition because the pension funds voted with the Board. A critique is offered of the occasion, and a comparison with the rather fairer rise requested by Ofgas's Director General, the gas company regulator, who had been paid as a 3 day a week contract, but had been working six days a week. With deregulation of the gas supply market, British Gas has been under governmental pressure to publish its prices, and has been undercut by competitors. The newly developed contractural relationships in the United Kingdom gas market are very complex and, for the first time subject to legal enforcement. (UK)
This article examines some techno-political aspects of the early years of electrification in British-ruled 1920s Palestine. It emphasizes the importance of local technical, topographical and hydrological forms of knowledge for understanding the dynamics of electrification. Situating the analysis in a general colonial context of electrification, the study shows that British colonial rulers lagged behind both German firms and local entrepreneurs in understanding the specific conditions pertaining to electrification in Palestine. Subsequently, the study shows that the British had limited control of the actual electrification process and its declared/professed developmental purposes, thereby complicating assumptions about electrification as a tool of the Empire/tool of empire. Finding some similarities between the cases of electrifying Palestine and India, the article's findings may shed further light on the importance of micro-politics of knowledge for understanding the trajectory of electrification in the colonies.
The thesis analyses the connections between British civil engineers and British imperialism in the period 1880-1914. The thesis works at the intersection of intellectual history, history of technology, and imperial history. The thesis argues that Britain and the Empire should be studied...... as an interconnected dynamic unity in which engineers were situated; the geographical and ideological context in which their activities took place. The thesis can be read as a contribution to recent re-conceptualisations of the British Empire as a zone bind together by ‘colonial connections' and ‘imperial networks......' through which knowledge circulated, people travelled, and through which trust and authority was negotiated. It is furthermore a contribution to the cultural and intellectual history of engineering....
Full Text Available Accurate segmentation of medical images is a key step in contouring during radiotherapy planning. Computed topography (CT and Magnetic resonance (MR imaging are the most widely used radiographic techniques in diagnosis, clinical studies and treatment planning. This review provides details of automated segmentation methods, specifically discussed in the context of CT and MR images. The motive is to discuss the problems encountered in segmentation of CT and MR images, and the relative merits and limitations of methods currently available for segmentation of medical images.
Gjermundsen, Endre F.; Briner, Jason P.; Akçar, Naki; Foros, Jørn; Kubik, Peter W.; Salvigsen, Otto; Hormes, Anne
The alpine topography observed in many mountainous regions is thought to have formed during repeated glaciations of the Quaternary period. Before this time, landscapes had much less relief. However, the spatial patterns and rates of Quaternary exhumation at high latitudes--where cold-based glaciers may protect rather than erode landscapes--are not fully quantified. Here we determine the exposure and burial histories of rock samples from eight summits of steep alpine peaks in northwestern Svalbard (79.5° N) using analyses of 10Be and 26Al concentrations. We find that the summits have been preserved for at least the past one million years. The antiquity of Svalbard’s alpine landscape is supported by the preservation of sediments older than one million years along a fjord valley, which suggests that both mountain summits and low-elevation landscapes experienced very low erosion rates over the past million years. Our findings support the establishment of northwestern Svalbard’s alpine topography during the early Quaternary. We suggest that, as the Quaternary ice age progressed, glacial erosion in the Arctic became inefficient and confined to ice streams, and high-relief alpine landscapes were preserved by minimally erosive glacier armour.
Cary, C.N.; Block, J.A.
A system of hardware and software has been developed and used to record and display in various forms details of the countercurrent flow topographies occurring in a scaled Pressurized Water Reactor downcomer annulus. An array of 288 conductivity sensors was mounted in a 1/15 scale PWR annulus. At each moment in time, the state of each probe indicates the presence or absence of water in this immediate vicinity. An electronic data acquisition system records the states of all probes 108 times per second on magnetic tape; software routines retrieve the data and reconstruct visual analogs of the flow topographies. The instantaneous two-phase state of the annulus at each instant can be displayed on a hard copy plotter or on a CRT screen. By synchronizing a camera drive with the CRT display, 16mm films have been made recreating the flow process at full speed and at various slow motion rates. All data obtained are stored in computer files in numerical form and can be subjected to various types of quantitative analysis to assist in advanced code development and verification
Neumann, Gregory; Smith, David E.; Zuber, Maria T.; Mazarico, Erwan
The Lunar Orbiter Laser Altimeter (LOLA) onboard the Lunar Reconnaissance Orbiter (LRO) has been operating nearly continuously since July 2009, accumulating over 6 billion measurements from more than 2 billion in-orbit laser shots. LRO's near-polar orbit results in very high data density in the immediate vicinity of the lunar poles, with full coverage at the equator from more than 12000 orbital tracks averaging less than 1 km in spacing at the equator. LRO has obtained a global geodetic model of the lunar topography with 50-meter horizontal and 1-m radial accuracy in a lunar center-of-mass coordinate system, with profiles of topography at 20-m horizontal resolution, and 0.1-m vertical precision. LOLA also provides measurements of reflectivity and surface roughness down to its 5-m laser spot size. With these data LOLA has measured the shape of all lunar craters 20 km and larger. In the proposed extended mission commencing late in 2012, LOLA will concentrate observations in the Southern Hemisphere, improving the density of the polar coverage to nearly 10-m pixel resolution and accuracy to better than 20 m total position error. Uses for these data include mission planning and targeting, illumination studies, geodetic control of images, as well as lunar geology and geophysics. Further improvements in geodetic accuracy are anticipated from the use of re ned gravity fields after the successful completion of the Gravity Recovery and Interior Laboratory (GRAIL) mission in 2012.
Dehghan-Niri, Ehsan; Al-Beer, Helem
Fundamental understanding of ultrasound interaction with material discontinuities having closed interfaces has many engineering applications such as nondestructive evaluation of defects like kissing bonds and cracks in critical structural and mechanical components. In this paper, to analyze the acoustic field nonlinearities due to defects with closed interfaces, the use of a common technique in nonlinear physics, based on a phase-space topography construction of ultrasound waveform, is proposed. The central idea is to complement the "time" and "frequency" domain analyses with the "phase-space" domain analysis of nonlinear ultrasound waveforms. A nonlinear time series method known as pseudo phase-space topography construction is used to construct equivalent phase-space portrait of measured ultrasound waveforms. Several nonlinear models are considered to numerically simulate nonlinear ultrasound waveforms. The phase-space response of the simulated waveforms is shown to provide different topographic information, while the frequency domain shows similar spectral behavior. Thus, model classification can be substantially enhanced in the phase-space domain. Experimental results on high strength aluminum samples show that the phase-space transformation provides a unique detection and classification capabilities. The Poincaré map of the phase-space domain is also used to better understand the nonlinear behavior of ultrasound waveforms. It is shown that the analysis of ultrasound nonlinearities is more convenient and informative in the phase-space domain than in the frequency domain. Copyright © 2017 Elsevier B.V. All rights reserved.
Fu, Roger R.; Ermakov, Anton; Marchi, Simone; Castillo-Rogez, Julie C.; Raymond, Carol A.; Hager, Bradford; Zuber, Maria; King, Scott D.; Bland, Michael T.; De Sanctis, Maria Cristina; Preusker, Frank; Park, Ryan S.; Russell, Christopher T.
Ceres, the largest body in the asteroid belt (940 km diameter), provides a unique opportunity to study the interior structure of a volatile-rich dwarf planet. Variations in a planetary body's subsurface rheology and density affect the rate of topographic relaxation. Preferential attenuation of long wavelength topography (≥150 km) on Ceres suggests that the viscosity of its crust decreases with increasing depth. We present finite element (FE) geodynamical simulations of Ceres to identify the internal structures and compositions that best reproduce its topography as observed by the NASA Dawn mission. We infer that Ceres has a mechanically strong crust with maximum effective viscosity ∼1025 Pa s. Combined with density constraints, this rheology suggests a crustal composition of carbonates or phyllosilicates, water ice, and at least 30 volume percent (vol.%) low-density, high-strength phases most consistent with salt and/or clathrate hydrates. The inference of these crustal materials supports the past existence of a global ocean, consistent with the observed surface composition. Meanwhile, we infer that the uppermost ≥60 km of the silicate-rich mantle is mechanically weak with viscosity <1021 Pa s, suggesting the presence of liquid pore fluids in this region and a low temperature history that avoided igneous differentiation due to late accretion or efficient heat loss through hydrothermal processes.
Costa, Daniel O; Allo, Bedilu A; Klassen, Robert; Hutter, Jeffrey L; Dixon, S Jeffrey; Rizkalla, Amin S
The behavior of cells responsible for bone formation, osseointegration, and bone bonding in vivo are governed by both the surface chemistry and topography of scaffold matrices. Bone-like apatite coatings represent a promising method to improve the osteoconductivity and bonding of synthetic scaffold materials to mineralized tissues for regenerative procedures in orthopedics and dentistry. Polycaprolactone (PCL) films were coated with calcium phosphates (CaP) by incubation in simulated body fluid (SBF). We investigated the effect of SBF ion concentration and soaking time on the surface properties of the resulting apatite coatings. CaP coatings were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectrometry (FTIR), and energy dispersive X-ray spectrometry (EDX). Young's modulus (E(s)) was determined by nanoindentation, and surface roughness was assessed by atomic force microscopy (AFM) and mechanical stylus profilometry. CaP such as carbonate-substituted apatite were deposited onto PCL films. SEM and AFM images of the apatite coatings revealed an increase in topographical complexity and surface roughness with increasing ion concentration of SBF solutions. Young's moduli (E(s)) of various CaP coatings were not significantly different, regardless of the CaP phase or surface roughness. Thus, SBF with high ion concentrations may be used to coat synthetic polymers with CaP layers of different surface topography and roughness to improve the osteoconductivity and bone-bonding ability of the scaffold. © 2012 American Chemical Society
González-Méijome, José Manuel; Queirós, Antonio; Jorge, Jorge; Fernandes, Paulo; Cerviño, Alejandro; de Almeida, José Borges
To analyze the factors affecting data acquisition during corneal topography examination with the Medmont E-300 videokeratoscope and to provide strategies to minimize their effects. Sixty eyes from thirty young adults were examined. A second observer registered incidences with the potential to affect data acquisition. Those factors were correlated with the difficulty of measurements as judged subjectively by the practitioner who performed the examination. Measurements of axial curvature were analyzed to evaluate the variability expressed as intrasession and intersession coefficient of variation and the standard error of the mean (SEM). The level of difficulty rated by the practitioner was in general low, with 70% of the eyes being easy or very easy to measure. For the remaining 30% of the eyes, corneal topography measurements were considered to be difficult (27%) or very difficult (3%). Of the external parameters investigated, only fixation instability (PSEM improved when three readings from each session were considered. The level of subjective difficulty found during videokeratoscopy examination is correlated strongly with fixation instability and the need for head reorientation in the chin rest, whereas tear-related events seem to be less relevant in the practitioner perception of test ease or difficulty. Those factors have relevance in measurement variability.
Santoni, Christian; Ciri, Umberto; Leonardi, Stefano
Onshore wind turbines produce more than 17 GW in the US, which constitutes 4 . 4 % of all the energy produced. Sites selection is mostly determined by the atmospheric conditions and the topographical characteristics of the region. While the effect of the atmospheric boundary layer had been widely studied, less attention has been given to the effect of the topography on the wind turbine aerodynamics. To address how the topography affects the flow, Large Eddy Simulations of the flow over a wind turbine placed over wavy wall are performed. The wavelength of the wavy terrain, λ, is 1 . 7 D where D is the turbine rotor diameter. Two different values of the height of the wavy wall, a / D = 0 . 05 and a / D = 0 . 10 have been considered. In addition, two positions of the turbine with respect to the wavy wall had been studied, on the crest and trough of the wavy wall and compared with a wind turbine over a flat wall. For the turbine located at the crest, the pressure gradient due to the wavy wall caused a recirculation behind the wind tower 2 . 5 D larger than that of the smooth wall. When placed at the trough of the wavy terrain, the favorable pressure gradient increases the wake velocity near the wall and promotes entrainment into the turbine wake. Numerical simulations were performed on XSEDE TACC, Grant CTS070066. This work was supported by the NSF, grant IIA-1243482 (WINDINSPIRE).
Guerri, Mattia; Cammarano, Fabio; Tackley, Paul J.
Earth's surface topography is controlled by isostatically compensated density variations within the lithosphere, but dynamic topography - i.e. the topography due to adjustment of surface to mantle convection - is an important component, specially at a global scale. In order to separate these two components it is fundamental to estimate crustal and mantle density structure and rheological properties. Usually, crustal density is constrained from interpretation of available seismic data (mostly VP profiles) based on empirical relationships such those in Brocher . Mantle density structure is inferred from seismic tomography models. Constant coefficients are used to interpret seismic velocity anomalies in density anomalies. These simplified methods are unable to model the effects that pressure and temperature variations have on mineralogical assemblage and physical properties. Our approach is based on a multidisciplinary method that involves geophysical observables, mineral physics constraints, and petrological data. Mantle density is based on the thermal interpretation of global seismic tomography models assuming various compositional structures, as in Cammarano et al. . We further constrain the top 150 km by including heat-flow data and considering the thermal evolution of the oceanic lithosphere. Crustal density is calculated as in Guerri and Cammarano  performing thermodynamic modeling of various average chemical compositions proposed for the crust. The modeling, performed with the code PerpleX [Connolly, 2005], relies on the thermodynamic dataset from Holland and Powell . Compressional waves velocity and crustal layers thickness from the model CRUST 1.0 [Laske et al., 2013] offer additional constrains. The resulting lithospheric density models are tested against gravity (GOCE) data. Various crustal and mantle density models have been tested in order to ascertain the effects that uncertainties in the estimate of those features have on the
Robyn J. Laing
Full Text Available It is known that retinal input is necessary for the normal development of striate cortex and its corticocortical connections, but there is little information on the role that retinal input plays in the development of retinotopically organized connections between V1 and surrounding visual areas. In nearly all lateral extrastriate areas, the anatomical and physiological representation of the nasotemporal axis of the visual field mirrors the representation of this axis in V1. To determine whether the mediolateral topography of striate-extrastriate projections is preserved in neonatally enucleated rats, we analyzed the patterns of projections resulting from tracer injections placed at different sites along the mediolateral axis of V1. We found that the correlation between the distance from injection sites to the lateral border of V1 and the distance of the labeling patterns in area 18a was strong in controls and much weaker in enucleates. Data from pairs of injections in the same animal revealed that the separation of area 18a projection fields for a given separation of injection sites was more variable in enucleated than in control rats. Our analysis of single and double tracer injections suggests that neonatal bilateral enucleation weakens, but not completely abolishes, the mediolateral topography in area 18a.
Zhou Yuanxiang; Wang Yunshan; Sun Qinghua; Wang Ninghua
Polyethylene (PE) is a major kind of internal insulating material. With great progresses of space charge measurement technologies in the last three decades, lots of researches are focused on space charge in PE. The heat pressing and annealing condition of polyethylene affect its morphology obviously. During the heat pressing, the surface of PE forms different surface topographies because of different substrate materials. Surface topography has great relation to the epitaxial crystallization layer and influences the space charge characteristic of PE dramatically. This paper studied the formation process of different surface topographies and their micrographic characters in low density polyethylene (LDPE). pulsed electro-acoustic (PEA) method was used to measure the space charge distribution of samples with different surface topographies and morphologies in LDPE. The effect of surface topography and morphology to space charge packet were studied. The surface topography has great influence on space charge packet polarity and morphology has influence on both movement speed rate and polarity of space charge packet.
Senin, Nicola; Thompson, Adam; Leach, Richard
The use of state-of-the-art areal topography measurement instrumentation allows for a high level of detail in the acquisition of topographic information at micrometric scales. The 3D geometric models of surface topography obtained from measured data create new opportunities for the investigation of manufacturing processes through characterisation of the surfaces of manufactured parts. Conventional methods for quantitative assessment of topography usually only involve the computation of texture parameters, summary indicators of topography-related characteristics that are computed over the investigated area. However, further useful information may be obtained through characterisation of signature topographic formations, as more direct indicators of manufacturing process behaviour and performance. In this work, laser powder bed fusion of metals is considered. An original algorithmic method is proposed to isolate relevant topographic formations and to quantify their dimensional and geometric properties, using areal topography data acquired by state-of-the-art areal topography measurement instrumentation.
Simmons, Colin H; Maguire, Dennis E
The Manual of Engineering Drawing has long been recognised as the student and practising engineer's guide to producing engineering drawings that comply with ISO and British Standards. The information in this book is equally applicable to any CAD application or manual drawing. The second edition is fully in line with the requirements of the new British Standard BS8888: 2002, and will help engineers, lecturers and students with the transition to the new standards.BS8888 is fully based on the relevant ISO standards, so this book is also ideal for an international readership. The comprehen
Grogan, Sarah; Parlane, Victoria L; Buckley, Emily
The purpose of this study was to explore young British men's understandings of prostate health and cancer of the prostate. A total of 16 White-British men between 31-50 years of age took part in interviews face-to-face or through computer-mediated communication. Thematic analysis broadly informed by grounded theory identified two key themes; 'limited knowledge about the prostate' and 'early detection & unpleasant procedures'. Accounts are discussed with reference to implications for improving men's understandings of prostate cancer, and likelihood of self-referral for prostate screening where necessary.
Heide, M.; Noedland, S.I.
Representatives from ten Norwegian companies in the offshore supplies industry were interviewed to explore the opportunities and barriers they had experienced in their effort to enter the British offshore sector. The interviews revealed that there are mainly four reasons why British sector is regarded as a favorable market: British sector is a natural homemarket, buyers operate both on the British and the Norwegian sector, the British sector can be a ''door-opener'' to the rest of the English speaking world, and finally the British sector is a market of considerable size. The companies had mainly encountered three types of barriers: British culture/communication problems, heavy competition from British suppliers, and protectionism. The report is concluded by summarizing what we believe are the critical success factors for entering the British sector. Directions for further research are also given
Han, Xingxing; Liu, Deyou; Xu, Chang
This paper evaluates the influence of atmospheric stability and topography on wind turbine performance and wake properties in complex terrain. To assess atmospheric stability effects on wind turbine performance, an equivalent wind speed calculated with the power output and the manufacture power...... and topography have significant influences on wind turbine performance and wake properties. Considering effects of atmospheric stability and topography will benefit the wind resource assessment in complex terrain....
Acquisition of an Underway CTD System for the Flow Encountering Abrupt Topography DRI T. M. Shaun Johnston Scripps Institution of Oceanography...westward flow in the North Equatorial Current (NEC) encounters tall, steep, submarine topography and islands. During the Flow Encountering Abrupt... Topography (FLEAT) DRI, investigators will determine: • Whether appreciable energy/momentum is lost from the large-scale NEC flow to smaller scales and
1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Flow- topography Interactions in the Vicinity of a Deep...flow around abrupt topography in operational Navy models. RELATED PROJECTS NRL FY17 6.2 New Start proposal (pending proposal), titled...Predictability of Flow Interacting with Abrupt Topography (FIAT)”; lead PI: Ana Rice, NRL-SSC. The objective of FIAT is to use observations to develop Navy
Kimmins, J.P.; Lavender, D.P. (Univ. of British Columbia, Vancouver, BC (Canada). Dept. of Forest Science)
British Columbia is a vast province encompassing a wide latitudinal and elevational range. Four of the five major classes of climate in the world are found in British Columbia, where prevailing westerly winds from the Pacific and a series of north-south mountain ranges have produced widely differing local climates. The predicted global warming may result in the migration of species and communities upslope and toward the north, but the heterogenous nature of the present landscape suggests that such migration may not be as pronounced as that likely to occur in regions of Canada with less relief. Effects of climatic warming on long-lived temperate zone trees include possible increased frost damage in early spring; reduced seed production; increased insect and disease incidence; increased damage to forests by wildfire; and, in the warmer parts of coastal British Columbia, a winter climate too warm to satisfy the chilling requirements of some perennial plants.
Full Text Available Aircraft aluminum alloy is easy to initiate pitting corrosion in the service environment, the pitting corrosion topography characteristics could directly affect the fatigue mechanical property of structure material. In order to obtain the pitting corrosion topography characteristics of LC4 aluminum alloy in the service environment, the accelerated corrosion test was carried out along the accelerated corrosion test environment spectrum which imitated the service environment spectrum, and the corrosion topography characteristic parameters of corrosion pit depth H,corrosion pit surface length L and corrosion pit surface width W were defined respectively. During the corrosion test process,the three parameters of typical corrosion pit were successively measured in different equivalent corrosion years for obtaining the corrosion pit damage size data, then the data were analysed through the statistics method and fractal theory. Further more in order to gain the pit topography characteristics in the same equivalent corrosion year and the topography evolution laws during different equivalent corrosion years were gained. The analysis results indicate that LC4 aluminum alloy corrosion pit topography characteristics in the service environment include the following:firstly, the pit topography characteristic parameters conform to the lognormal distributions in the same equivalent corrosion years; secondly,the pit topography characteristic parameters gradually reflect the fractal feature in accordance with the equivalent corrosion year increment, and the pits tend to be shallow, long and moderate wide topography character.
In the eighteenth century, lying-in hospitals were founded in many European towns and cities. The way in which these institutions were financed differed greatly across Europe. In the UK, most of them were "charities" and relied on donations from wealthy benefactors, whereas on the continent they were usually funded by "public" money, be it from the state or local communities. The paper focuses on British charities and German hospitals, and explores the corollaries of the mode of financing. In the eighteenth century, a market emerged in Britain where numerous charities with different aims competed for donations from the well-to-do. For attracting benefactors, a charity had to convince potential donors that its clientele and purpose were particularly deserving, and that it used the money donated in a cost-efficient way. In Germany, it was mainly bureaucrats and governments who had to be persuaded, but public opinion did matter as well. In British lying-in charities, the main donors acted as governors, and benefactors could recommend persons for being admitted. In publicly funded German hospitals, the medical directors had much more power. In the competitive market, in which British charities acted, out-patient dispensaries (policlinics) became increasingly important, since they could argue that they were more cost-efficient and had lower mortality. In Germany, however, hospitals remained the dominant type of assistance in this field, in spite of the criticism they received. The different sources of finance appear to have been one of the reasons for this divergence. Teaching was the main purpose of most German lying-in hospitals. They either trained medical students or midwife apprentices or both. Since the patients served as teaching objects, all women were welcomed, and in fact most patients were single mothers. By contrast, most of the British institutions admitted only married women, because donors did not wish to encourage immorality. The charities staged the
Crosby, Christopher; Nandigam, Viswanath; Arrowsmith, Ramon; Phan, Minh; Gross, Benjamin
Centimeter to decimeter-scale 2.5 to 3D sampling of the Earth surface topography coupled with the potential for photorealistic coloring of point clouds and texture mapping of meshes enables a wide range of science applications. Not only is the configuration and state of the surface as imaged valuable, but repeat surveys enable quantification of topographic change (erosion, deposition, and displacement) caused by various geologic processes. We are in an era of ubiquitous point clouds that come from both active sources such as laser scanners and radar as well as passive scene reconstruction via structure from motion (SfM) photogrammetry. With the decreasing costs of high-resolution topography (HRT) data collection, via methods such as SfM and UAS-based laser scanning, the number of researchers collecting these data is increasing. These "long-tail" topographic data are of modest size but great value, and challenges exist to making them widely discoverable, shared, annotated, cited, managed and archived. Presently, there are no central repositories or services to support storage and curation of these datasets. The U.S. National Science Foundation funded OpenTopography (OT) Facility employs cyberinfrastructure including large-scale data management, high-performance computing, and service-oriented architectures, to provide efficient online access to large HRT (mostly lidar) datasets, metadata, and processing tools. With over 225 datasets and 15,000 registered users, OT is well positioned to provide curation for community collected high-resolution topographic data. OT has developed a "Community DataSpace", a service built on a low cost storage cloud (e.g. AWS S3) to make it easy for researchers to upload, curate, annotate and distribute their datasets. The system's ingestion workflow will extract metadata from data uploaded; validate it; assign a digital object identifier (DOI); and create a searchable catalog entry, before publishing via the OT portal. The OT Community
Watkinson, A. J.; Menard, J.; Patton, R. L.
Earth's wavelength-dependent response to loading, reflected in observed topography, gravity, and seismicity, can be interpreted in terms of a stack of layers under the assumption of transverse isotropy. The theory of plate tectonics holds that the outermost layers of this stack are mobile, produced at oceanic ridges, and consumed at subduction zones. Their toroidal motions are generally consistent with those of several rigid bodies, except in the world's active mountain belts where strains are partitioned and preserved in tectonite fabrics. Even portions of the oceanic lithosphere exhibit non-rigid behavior. Earth's gravity-topography cross-spectrum exhibits notable variations in signal amplitude and character at spherical harmonic degrees l=13, 116, 416, and 1389. Corresponding Cartesian wavelengths are approximately equal to the respective thicknesses of Earth's mantle, continental mantle lithosphere, oceanic thermal lithosphere, and continental crust, all known from seismology. Regional variations in seismic moment release with depth, derived from the global Centroid Moment Tensor catalog, are also evident in the crust and mantle lithosphere. Combined, these observations provide powerful constraints for the structure and evolution of the crust, mantle lithosphere, and mantle as a whole. All that is required is a dynamically consistent mechanism relating wavelength to layer thickness and shear-strain localization. A statistically-invariant 'diharmonic' relation exhibiting these properties appears as the leading order approximation to toroidal motions on a self-gravitating body of differential grade-2 material. We use this relation, specifically its predictions of weakness and rigidity, and of folding and shear banding response as a function of wavelength-to-thickness ratio, to interpret Earth's gravity, topography, and seismicity in four-dimensions. We find the mantle lithosphere to be about 255-km thick beneath the Himalaya and the Andes, and the long
Smith, Kathryn E.L.; Nayegandhi, Amar; Wright, C. Wayne; Bonisteel, Jamie M.; Brock, John C.
These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) elevation data were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. The project provides highly detailed and accurate datasets of select barrier islands and peninsular regions of Louisiana, Mississippi, Alabama, and Florida, acquired June 27-30, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system
Bureš, Luděk; Máca, Petr; Roub, Radek; Pech, Pavel; Hejduk, Tomáš; Novák, Pavel
Topographic model including River bathymetry (bed topography) is required for hydrodynamic simulation, water quality modelling, flood inundation mapping, sediment transport, ecological and geomorphologic assessments. The most common way to create the river bathymetry is to use of the spatial interpolation of discrete points or cross sections data. The quality of the generated bathymetry is dependent on the quality of the measurements, on the used technology and on the size of input dataset. Extensive measurements are often time consuming and expensive. Other option for creating of the river bathymetry is to use the methods of mathematical modelling. In the presented contribution we created the river bathymetry model. Model is based on the analytical curves. The curves are bent into shape of the cross sections. For the best description of the river bathymetry we need to know the values of the model parameters. For finding these parameters we use of the global optimization methods. The global optimization schemes is based on heuristics inspired by the natural processes. We use new type of DE (differential evolution) for finding the solutions of inverse problems, related to the parameters of mathematical model of river bed surfaces. The presented analysis discuss the dependence of model parameters on the selected characteristics. Selected characteristics are: (1) Topographic characteristics (slope and curvature in the left and right floodplains) determined on the base of DTM 5G (digital terrain model). (2) Optimization scheme. (3) Type of used analytical curves. The novel approach is applied on the three parts of Vltava river in Czech Republic. Each part of the river is described on the base of the point field. The point fields was measured with ADCP probe River surveyor M9. This work was supported by the Technology Agency of the Czech Republic, programme Alpha (project TA04020042 - New technologies bathymetry of rivers and reservoirs to determine their storage
Schenk, Paul M.
The renewed effort to return to Europa for global mapping and landing site selection raises the question: What do we know about Europa topography and how do we know it? The question relates to geologic questions of feature formation, to the issue of ice shell thickness, mechanical strength, and internal activity, and to landing hazards. Our topographic data base for Europa is sparse indeed (no global map is possible), but we are not without hope. Two prime methods have been employed in our mapping program are stereo image and shape-from-shading (PC) slope analyses. On Europa, we are fortunate that many PC-DEM areas are also controlled by stereo-DEMs, mitigating the long-wavelength uncertainties in the PC data. Due to the Galileo antenna malfunction, mapping is limited to no more than 20% of the surface, far less than for any of the inner planets. Thirty-seven individual mapping sites have been identified, scattered across the globe, and all have now been mapped. Excellent stereo mapping is possible at all Sun angles, if resolution is below ~350 m. PC mapping is possible at Sun angles greater than ~60 degrees, if emission angles are less than ~40 degrees. The only extended contiguous areas of topographic mapping larger than 150 km across are the two narrow REGMAP mapping mosaics extending pole-to-pole along longitudes 85 and 240 W. These are PC-only and subject to long-wavelength uncertainties and errors, especially in the north/south where oblique imaging produces layover. Key findings include the mean slopes of individual terrain types (Schenk, 2009), topography across chaos (Schenk and Pappalardo, 2004), topography of craters and inferences for ice shell thickness (Schenk, 2002; Schenk and Turtle, 2009), among others. A key discovery, despite the limited data, is that Europan terrains rarely have topographic amplitude greater than 250 meters, but that regionally Europa has imprinted on it topographic amplitudes of +/- 1 km, in the form of raised plateaus and
Scanlon, Kevin J; Lieberman, Mark A
As medicine moves into the 21st century, life saving therapies will move from inception into medical products faster if there is a better synergy between science and business. Medicine appears to have 50-year innovative cycles of education and scientific discoveries. In the 1880's, the chemical industry in Germany was faced with the dilemma of modernization to exploit the new scientific discoveries. The solution was the spawning of novel technical colleges for training in these new chemical industries. The impact of those new employees and their groundbreaking compounds had a profound influence on medicine and medical education in Germany between 1880 and 1930. Germany dominated international science during this period and was a training center for scientists worldwide. This model of synergy between education and business was envied and admired in Europe, Asia and America. British science soon after evolved to dominate the field of science during the prewar and post World War (1930's-1970's) because the German scientists fled Hitler's government. These expatriated scientists had a profound influence on the teaching and training of British scientists, which lead to advances in medicine such as antibiotics. After the Second World War, the US government wisely funded the development of the medical infrastructure that we see today. British and German scientists in medicine moved to America because of this bountiful funding for their research. These expatriated scientists helped drive these medical advances into commercialized products by the 1980's. America has been the center of medical education and advances of biotechnology but will it continue? International scientists trained in America have started to return to Europe and Asia. These American-trained scientists and their governments are very aware of the commercial potential of biotechnology. Those governments are now more prepared to play an active role this new science. Germany, Ireland, Britain, Singapore
The paper deals with the UK natural gas market and the future for Norwegian gas in the UK. The role of the British Gas in the domestic and European markets is discussed. Topics are: The UK gas supply market; the UK upstream gas market and the Interconnector; the European market, competition and deregulation; the prospects for Norwegian gas
Scott, James Calvert
English language business-related documents around the world contain purposeful spelling differences that reflect two standards, American English and British English. Given the importance of culturally acceptable spelling, the need to be aware of and sensitive to cultural differences, and strong reactions to variation in spelling, it is important…
Hadfield, L.; Rudoe, N.; Sanderson-Mann, J.
In this paper we ask: How is motherhood being represented in the British media, especially in relation to choice, age and fertility? Do media discourses reflect a redefinition or transformation of "motherhood" in the twenty-first century, and what implications do they have for feminist research into maternal identity and motherhood? As…
supporters. 92 Colin P. Clarke, Molly Dunigan, Beth Grill, and Christopher Paul, Paths to Victory: Detailed Insurgency Case Studies (Washington, DC: RAND...labor pool for imperial dirty work, the decision to deputize untrained and ill-disciplined volunteers backfired. A third example of how British
This thesis examines the process of institutional change in British Columbia’s timber sector. It is composed of a series of essays which highlight the underlying political and economic factors that have shaped past and current reforms. Taking center stage in the analysis, are the resource rents
Notes that while American technical writing texts stress brevity and directness as important characteristics of business correspondence, British texts stress qualities of personality and courtesy, especially in the memo. Shows how to incorporate personality into correspondence, thereby building cooperation among colleagues. (FL)
sometimes army officers writing the occasional despatch to the British metropolitan press. There was ..... defence”.27 He was backed both by the army's commander-in-chief, Field Marshal. Lord Wolseley ..... The role of the press was less significant under succeeding directors of. Intelligence ..... Financial Times ? Unknown.
Higgins, Steve, Ed.; Coffield, Frank, Ed.
In 1916 John Dewey published "Democracy and Education: An introduction to the philosophy of education". In this book some of today's foremost historians, philosophers, psychologists, and sociologists of education mark the anniversary of Dewey's work by reviewing and reflecting, from a British perspective, on Dewey's contribution to our…
Martin, William J.
The British Isles Field Experience (BIFE) program was initiated at Williamsport Area Community College (WACC) to provide a group of WACC faculty and staff members with individual and group activities of a personal, professional, and cultural nature in order to promote an international perspective that can be infused into student, collegiate, and…
There has been little published pedagogical research on popular music group rehearsing. This study explores the perceptions of tutors and student pop/rock bands about the rehearsals in which they were involved as a part of their university music course. The participants were 10 tutors and 16 bands from eight British tertiary institutions. Analysis…
tions in a national and international context, by comparing the traditions and the roles of the lan- ... The changing linguistic, social, and educational situations in South Africa ... abroad, by the British and American leXicographical traditions. ... interactional styles in the South African social psychology and cross-cultural.
Orfanidou, E.; McQueen, J.M.; Adam, R.; Morgan, G.
This study asks how users of British Sign Language (BSL) recognize individual signs in connected sign sequences. We examined whether this is achieved through modality-specific or modality-general segmentation procedures. A modality-specific feature of signed languages is that, during continuous
In 2013 is in de Canadese provincie British Columbia nieuwe familierechtwetgeving in werking getreden: de Family Law Act, met daarin een regeling voor draagmoederschap, meerouderschap en meeroudergezag. Gezien de discussie in Nederland over deze onderwerpen en de instelling van de Staatscommissie
Showunmi, Victoria; Atewologun, Doyin; Bebbington, Diane
A qualitative study was conducted to examine how gender and ethnicity influenced leadership experiences of a mixed ethnic sample of British women. An intersectional framework was used which took the viewpoint that socio-demographic identities should be considered simultaneously in order to challenge universalist, gender and ethnic neutral…
To explore nostalgic constructions of nurse education in British National newspapers. British newspaper discourse relating to the increased academic level of nurse education in the UK is negative, evoking comparisons between negative constructions of nurse education in the present and an idealized nostalgic view of the past. Discussion paper. This study used a critical discourse analysis approach to analyse 11 British Newspaper articles, which exemplify nostalgic constructions of nurse education. This was a purposive sample from a database search (LexisNexis) of British national newspaper articles relating to the increasing academic level of nurse education in the period from 1999-2012. A dominant nostalgic discourse constructs a 'golden era' of nurse education, which idealizes the past, making the present flawed in comparison. Nostalgic constructions create group identities creating contrasting 'caring' nurses educated in the idealized past with those educated now, who are perceived as too educated to care. An inherent characteristic of the nostalgic discourse is the notion that the solution to current problems with nurse education is a return to an idealized version of the past. Another less common newspaper discourse views nostalgia as a problematic construct. Nostalgic discourse with a focus on the past potentially acts as a barrier to creating an effective nurse education system for the 21(st) Century. This focus on an idealized past also has potential consequences in terms of public opinion and legitimization of government policy, which might otherwise be viewed as retrograde. © 2014 John Wiley & Sons Ltd.
Szasz, F.M. (New Mexico Univ., Albuquerque, NM (United States))
This is a study of the British scientific mission to Los Alamos, New Mexico, from 1943 to 1947, and the impact it had on the early history of the atomic age. In the years following the Manhattan Project and the production of the world's first atomic explosion in 1945, the British contribution to the Project was played down or completely ignored leaving the impression that all the atomic scientists had been American. However, the two dozen or so British scientists contributed crucially to the development of the atomic bomb. First, the initial research and reports of British scientists convinced American scientists that an atomic weapons could be constructed before the likely end of hostilities. Secondly their contribution insured the bomb was available in the shortest possible time. Also, because these scientists became involved in post-war politics and in post-war development of nuclear power, they also helped forge the nuclear boundaries of the mid-twentieth century. (UK).
Abbas, Qassim; Al-Tufaili, Dhayef
The main concern of this study is to tackle exaggeration in British and American situations taken from "Mrs. Dalloway" and "The Great Gatsby" novels. From a pragmatic point of view, exaggeration in the field of literature has not been given enough attention. Accordingly, this study is an attempt to develop a model for the…
The continued military resistance of the Republics after the occupation of Bloemfontein and Pretoria and exaggerated by the advent of guerrilla tactics frustrated ... British policy came to revolve around denying Liebenberg use of the abundant food supplies in the Gatsrand by applying a scorched earth policy there and in the ...
invasion of Natal, stand on the punishment of high treason? Martial law had .... The offensive of the British Army in Natal and the immediate results thereof. On 11 May 1900, .... also to exercise its authority and independence. In addition to the ...
Robinson, Amanda L.; Howarth, Emma
Data from the largest study to date of the working practices of British victim support workers (known as Independent Domestic Violence Advisors or IDVAs) are used to provide insight into how "risk judgments" are made in cases of domestic violence. Using data from more than 2,000 victims, this study found a convergence between actuarial…
<正>Values are the most important issue in identifying one particular culture.Social values are the feelings people have about what is important,worthwhile,and just.In this paper,the differences between British and American values are discussed in two aspects which mainly lie respectively in the comparisons of values and characteristics in both cultures.
Colors have senses specific to particular fields such as physics and printing, in addi-tion to senses used in everyday life. This article examines the specialized information found in color definitions in French, American and British dictionaries. We explore whether specialized and non-specialized definitions are lumped or split ...
In particular, the article looks at the problem and issues relating to the relationship: licensing correspondents, censorship, monitoring journalists' activities, as well as the successful attempt of the intelligence sector to bring the press into their campaign to spread pro-British propaganda. The role of the press in the saga of the ...
Brown, Marie; Ralph, Sue
In many countries today teaching has been identified as one of the most stressful occupations. The total annual cost of stress to the British Education Service has been estimated as high as 360 million U.S. dollars. The objective of this research study with teachers in the Department of Education at the University of Manchester was to identify…
Myers, Martin; Bhopal, Kalwant
The number of families who choose to home educate has significantly increased in the last decade. This article explores the experiences of British Muslims who home educate using data from a larger study exploring the views of a diverse range of families. Drawing on the work of Beck, we discuss how 'risk' is understood in relation to Muslim home…
In making his substantive reference of the transportation and storage business of British Gas to the Monopolies and Mergers Commission, the Director General of Gas Supply identified the following principal effects adverse to the public interest: ''The absence of provision for the establishment of an independent undertaking to operate the pipe-line system and other facilities used by British Gas for the conveyance and storage of gas which would not be subject to conflicting interests in securing (a) transparency of the prices charged, the costs incurred and the operating methods in respect of the conveyance and storage of gas; (b) proper allocation to various parts of the Gas Supply Business of costs incurred and returns by that business; and (c) protection of information relating to the conveyance and storage of gas from which British Gas might obtain unfair commercial advantage, and thereby avoid the restriction or distortion of competition between British Gas and other persons whose business consists of or includes the supply of gas''. This paper considers the structural issues associated with achieving effective competition and looks at how the relationship between the businesses of supply and transportation might be organised in the short and longer term. (Author)
A compilation of data is presented on individual risk obtained from recent British population and mortality statistics. Risk data presented include: risk of death, as a function of age, due to several important natural causes and due to accidents and violence; risk of death as a function of location of accident; and risk of death from various accidental causes. (author)
Kiernan, M D; Arthur, A; Repper, J; Mukhuty, S; Fear, N T
The infantry accounts for more than a quarter of the British Army but there is a lack of data about the social and educational background of its recruits. To provide an insight into British Army infantry recruits' personal, social and educational background prior to enlistment. The study sample consisted of infantry recruits who enlisted into the British Army School of Infantry. Each recruit completed a 95-item biographical questionnaire. Descriptive statistics were used to describe the sample in terms of demographic, physical, personal, social and educational attributes. The study sample consisted of 1000 male recruits. Over half of the recruits were consuming alcohol at a hazardous or harmful level prior to enlistment and 60% of recruits had used cannabis prior to joining the Army. Academic attainment was low, with the majority of recruits achieving GCSE grade C and below in most subjects, with 15% not taking any examinations. Over half the recruits had been in trouble with the police and either been suspended or expelled from school. Substance misuse and poor behaviour are highly prevalent among recruits prior to enlistment. Taken alongside existing evidence that some of these problems are commonplace among personnel in regular service, the assumption that the British Army infantry is, in itself, a cause of these behaviours should be questioned. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: firstname.lastname@example.org.
Weller, L. David; McElwee, Gerard
Total Quality Management is being implemented in American and British schools to improve educational outcomes. The 14 points of Deming's quality model and Porter's models of competition and drivers of cost provide a systematic, structured template to promote educational excellence and meet the demands of social, political, and economic forces.…
Asaad, Yousra; Melewar, T. C.; Cohen, Geraldine
This study seeks to extend our knowledge of export market orientation (EMO) in the context of British universities with regard to recruitment of international students. Export marketing remains an area of limited focus in the marketization of higher education literature. The study predominantly follows a quantitative research design using survey…
British policy towards religion in colonial Africa was influenced by its intrinsic value to the maintenance of a very strong administration over the continent and achieving the socio-economic objectives Britain set itself at the beginning of its colonization. The Benin Kingdom had been largely untouched by any world religion ...
In this paper I outline a brief period in the history of the British Empire, during which colonial lunatic asylum policy began to be formulated. I begin with a scandal that erupted in Jamaica and suggest that this set in motion processes that led to critical changes in asylum administration. The first of these processes was an audit of hospitals and asylums in the colonies. The results of the audit and the policy that emerged from it marked the beginning of systematic regulation of lunatic asylum practice across the British Empire. It revealed a formulation of policy that was intended to cut across the self-governing regimes that had up to this point been allowed to evolve. Drawing on the work of Michel Foucault and Nikolas Rose, I argue that the policy and the practices associated with it contribute to an understanding of the emergence of the psy-sciences in colonial settings. They illustrate the establishment of a panoptic gaze on previously neglected insane spaces. Systematic surveillance constituted government at a distance and made colonial lunacy administration a governable discursive space. The regulation of the medical officers, lunatic attendants, and hospital boards began the process of creating a professional psychiatric workforce. I conclude with a discussion of the implications and the mixed impact of this policy change for the mentally ill across the empire, over the ensuing decades.
Gillon outlines the principles of the deontological, or duty-based, group of moral theories in one of a series of British Medical Journal articles on the philosophical foundations of medical ethics. He differentiates between monistic theories, such as Immanuel Kant's, which rely on a single moral principle, and pluralistic theories, such as that of W.D. Ross, which rely on several principles that potentially could conflict. He summarizes the contributions of Kant and Ross to the development of deontological thought, then concludes his essay with brief paragraphs on other deontological approaches to the resolution of conflicting moral principles.
Fu, Lee-Lueng; Alsdorf, Douglas; Rodriguez, Ernesto; Morrow, Rosemary; Mognard, Nelly; Vaze, Parag; Lafon, Thierry
A new space mission concept called Surface Water and Ocean Topography (SWOT) is being developed jointly by a collaborative effort of the international oceanographic and hydrological communities for making high-resolution measurement of the water elevation of both the ocean and land surface water to answer the questions about the oceanic submesoscale processes and the storage and discharge of land surface water. The key instrument payload would be a Ka-band radar interferometer capable of making high-resolution wide-swath altimetry measurement. This paper describes the proposed science objectives and requirements as well as the measurement approach of SWOT, which is baselined to be launched in 2019. SWOT would demonstrate this new approach to advancing both oceanography and land hydrology and set a standard for future altimetry missions.
Jones, Cathleen E.; Hensley, Scott; Michel, Thierry
The UAVSAR L-band synthetic aperture radar system has been designed for repeat track interferometry in support of Earth science applications that require high-precision measurements of small surface deformations over timescales from hours to years. Conventional motion compensation algorithms, which are based upon assumptions of a narrow beam and flat terrain, yield unacceptably large errors in areas with even moderate topographic relief, i.e., in most areas of interest. This often limits the ability to achieve sub-centimeter surface change detection over significant portions of an acquired scene. To reduce this source of error in the interferometric phase, we have implemented an advanced motion compensation algorithm that corrects for the scene topography and radar beam width. Here we discuss the algorithm used, its implementation in the UAVSAR data processor, and the improvement in interferometric phase and correlation achieved in areas with significant topographic relief.
McHale, Glen; Newton, Michael I; Shirtcliffe, Neil J
The spreading of a droplet of a liquid on a smooth solid surface is often described by the Hoffman-de Gennes law, which relates the edge speed, v e , to the dynamic and equilibrium contact angles θ and θ e through v e ∝θ(θ 2 -θ e 2 ). When the liquid wets the surface completely and the equilibrium contact angle vanishes, the edge speed is proportional to the cube of the dynamic contact angle. When the droplets are non-volatile this law gives rise to simple power laws with time for the contact angle and other parameters in both the capillary and gravity dominated regimes. On a textured surface, the equilibrium state of a droplet is strongly modified due to the amplification of the surface chemistry induced tendencies by the topography. The most common example is the conversion of hydrophobicity into superhydrophobicity. However, when the surface chemistry favors partial wetting, topography can result in a droplet spreading completely. A further, frequently overlooked consequence of topography is that the rate at which an out-of-equilibrium droplet spreads should also be modified. In this report, we review ideas related to the idea of topography induced wetting and consider how this may relate to dynamic wetting and the rate of droplet spreading. We consider the effect of the Wenzel and Cassie-Baxter equations on the driving forces and discuss how these may modify power laws for spreading. We relate the ideas to both the hydrodynamic viscous dissipation model and the molecular-kinetic theory of spreading. This suggests roughness and solid surface fraction modified Hoffman-de Gennes laws relating the edge speed to the dynamic and equilibrium contact angle. We also consider the spreading of small droplets and stripes of non-volatile liquids in the capillary regime and large droplets in the gravity regime. In the case of small non-volatile droplets spreading completely, a roughness modified Tanner's law giving the dependence of dynamic contact angle on time is
For this contribution to the special issue on "Mapping Queer Bioethics," the author employs an array of public health and popular media texts (especially Jonathan Demme's film Philadelphia) to challenge the construction and reconstruction of HIV-positive bodies as sites of bioethical concern. In outlining notions of "digital restoration," the author argues that there has been of late a remapping of the first decade of the HIV/AIDS pandemic through media projects assembled from archived materials. Accordingly, the author suggests that in the first decades of the 2000s, we have witnessed a media-archaeological turn, whereby old materials have been reassembled for commemorative purposes that oftentimes perform a reshaping of the topography of the first decade of the AIDS pandemic.
Banerdt, W.B.; Golombek, M.P.
Dominating the Western Hemisphere of Mars, the Tharsis rise is an elongate area centered on Syria Planum that ascends as much as 8 to 10 km above the datum. It is intensely fractured by long, narrow grabens that extend radially hundreds of kilometers beyond the rise and is ringed by mostly concentric wrinkle ridges that formed over 2,000 km from the center of the rise. Its size, involving a full hemisphere of Mars, gives it a central role in the thermo-tectonic evolution of the planet and has stimulated a number of studies attempting to determine the sequence of events responsible for this feature. The constraints that gravity and topography data place on the current structure of Tharsis, along with insights into its development derived from comparisons of detailed regional mapping of faulting with theoretical deformation models are reviewed. Finally, a self-consistent model for the structure of Tharsis is proposed
Full Text Available Keratoconus is a progressive ectatic disorder of the cornea which often presents with fluctuating refraction and high irregular astigmatism. Correcting the vision of these patients is often a challenge because glasses are unable to correct the irregular astigmatism and regular contact lenses may not fit them very well. Topography-guided custom ablation treatment (T-CAT is a procedure of limited ablation of the cornea using excimer laser with the aim of regularizing the cornea, improving the quality of vision and possibly contact lens fit. The aim of the procedure is not to give a complete refractive correction. It has been tried with a lot of success by various groups of refractive surgeons around the world but a meticulous and methodical planning of the procedure is essential to ensure optimum results. In this paper, we attempt to elucidate the planning for a T-CAT procedure for various types of cones and asphericities.
C. Xu, M.J. Kelley, C.E. Reece
To better understand the roll of topography on SRF cavity performance, we seek to obtain detailed topographic information from the curved practical cavity surfaces. Replicas taken from a cavity interior surface provide internal surface molds for fine Atomic Force Microscopy (AFM) and stylus profilometry. In this study, we confirm the replica resolution both on surface local defects such as grain boundary and etching pits and compare the surface uniform roughness with the aid of Power Spectral Density (PSD) where we can statistically obtain roughness parameters at different scales. A series of sampling locations are at the same magnetic field chosen at the same latitude on a single cell cavity to confirm the uniformity. Another series of sampling locations at different magnetic field amplitudes are chosen for this replica on the same cavity for later power loss calculation. We also show that application of the replica followed by rinsing does not adversely affect the cavity performance.
Klyatskin, V.I.; Woyczynski, W.A.; Gurarie, D.
The paper studies statistical characteristics of the passive tracer concentrations and of its spatial gradient, in random incompressible velocity fields from the viewpoint of statistical topography. The statistics of interest include mean values, probability distributions, as well as various functionals characterizing topographic features of tracers. The functional approach is used. We consider the influence of the mean flow (the linear shear flow) and the molecular diffusion coefficient on the statistics of the tracer. Most of our analysis is carried out in the framework of the delta-correlated (in time) approximation and conditions for its applicability are established. But we also consider the diffusion approximation scheme for finite correlation radius. The latter is applied to a diffusing passive tracer that undergoes sedimentation in a random velocity field
Swolfs, H.S.; Savage, W.Z.
Plane-strain solutions are used to analyze the influence of topography on the state of stress at Yucca Mountain, Nye County, Nevada. The results are in good agreement with the measured stress components obtained in drill holes by the hydraulic-fracturing technique, particularly those measured directly beneath the crest of the ridge, and indicate that these stresses are gravitationally induced. A separate analysis takes advantage of the fact that a well-developed set of vertical faults and fractures, subparallel to the ridge trend, imparts a vertical transverse isotropy to the rock and that, as a consequence of gravitational loading, unequal horizontal stresses are induced in directions perpendicular and parallel to the anisotropy
Dehon, R. A.; Waskom, J. A.
Isopach maps and structural contour maps of the eastern mare basins (30 deg N to 30 deg S; 0 deg to 100 deg E), constructed from measurements of partially buried craters, are presented and discussed. The data, which are sufficiently scattered to yield gross thickness variations, are restricted to shallow maria with less than 1500-2000 m of mare basalts. The average thickness of basalt in the irregular maria is between 200 and 400 m. Correlations between surface topography, basalt thickness, and basin floor structure are apparent in most of the basins that were studied. The mare surface is commonly depressed in regions of thick mare basalts; mare ridges are typically located in regions of pronounced thickness changes; and arcuate mare rilles are confined to thin mare basalts. Most surface structures are attributed to shallow stresses developed within the mare basalts during consolidation and volume reduction.
Halley, R.B.; Shinn, E.A.; Hudson, J.H.; Lidz, B.; Taylor, D.L.
Five core borings were taken on and around Boo Bee Patch Reef to better understand the origin of such shelf lagoon reefs. The cores reveal 4 stages of development: (1) subaerial exposure of a Pleistocene "high" having about 8 meters of relief, possibly a Pleistocene patch reef; (2) deposition of peat and impermeable terrigenous clay 3 meters thick around the high; (3) initiation of carbonate sediment production by corals and algae on the remaining 5 meters of hard Pleistocene topography and carbonate mud on the surrounding terrigenous clay; and (4) accelerated organic accumulation on the patch reef. Estimates of patch reef sedimentation rates (1.6 m/1000 years) are 3 to 4 times greater than off-reef sedimentation rates (0.4-0.5 m/1000 years). During periods of Pleistocene sedimentation on the Belize shelf, lagoon patch reefs may have grown above one another, stacking up to form reef accumulation of considerable thickness.
Mohammadpour, M; Morris, N J; Leighton, M; Rahnejat, H
Often the effect of interactions at nano-scale determines the tribological performance of load bearing contacts. This is particularly the case for lightly loaded conjunctions where a plethora of short range kinetic interactions occur. It is also true of larger load bearing conjunctions where boundary interactions become dominant. At the diminutive scale of fairly smooth surface topography the cumulative discrete interactions give rise to the dominance of boundary effects rather than the bulk micro-scale phenomena, based on continuum mechanics. The integration of the manifold localized discrete interactions into a continuum is the pre-requisite to the understanding of characteristic boundary effects, which transcend the physical length scales and affect the key observed system attributes. These are energy efficiency and vibration refinement. This paper strives to present such an approach. It is shown that boundary and near boundary interactions can be adequately described by surface topographical measures, as well the thermodynamic conditions. (paper)
Silva M.H. Prado da
Full Text Available Cylindrical dental implants made of commercially pure titanium were analysed in four different surface finishes: as-machined, Al2O3 blasted with Al2O3 particles, plasma-sprayed with titanium beads and electrolytically coated with hydroxyapatite. Scanning electron microscopy (SEM with Energy Dispersive X-ray Analysis (EDX revealed the topography of the surfaces and provided qualitative results of the chemical composition of the different implants. X-ray Photoelectron Spectroscopy (XPS was used to perform chemical analysis on the surface of the implants while Laser Scanning Confocal Microscopy (LSM produced topographic maps of the analysed surfaces. Optical Profilometry was used to quantitatively characterise the level of roughness of the surfaces. The implant that was plasma-sprayed and the hydroxyapatite coated implant showed the roughest surface, followed by the implant blasted with alumina and the as-machined implant. Some remnant contamination from the processes of blasting, coating and cleaning was detected by XPS.
Fractographs have been taken using a variety of probes each of which produces different types of information. Methods which have been used to examine fracture surfaces include: (a) optical microscopy, particularly interference contrast methods, (b) scanning electron microscopy (SEM), (c) SEM with electron channelling, (d) SEM with selected-area electron channelling, (e) Berg-Barrett (B-B) topography, and now (f) synchrotron x-radiation fractography (SXRF). This review concentrated on the role that x-ray methods can play in such studies. In particular, the ability to nondestructively assess the subsurface microstructure associated with the fracture to depths of the order of 5 to 10 μm becomes an important attribute for observations of a large class of semi-brittle metals, semiconductors and ceramics
Poljacek, Sanja Mahovic; Gojo, Miroslav; Raos, Pero; Stoic, Antun
Different surface topographic techniques are being widely used for quantitative measurements of typical industrial aluminium oxide surfaces. In this research, specific surface of aluminium oxide layer on the offset printing plate has been investigated by using measuring methods which have previously not been used for characterisation of such surfaces. By using two contact instruments and non-contact laser profilometer (LPM) 2D and 3D roughness parameters have been defined. SEM micrographs of the samples were made. Results have shown that aluminium oxide surfaces with the same average roughness value (Ra) and mean roughness depth (Rz) typically used in the printing plate surface characterisation, have dramatically different surface topographies. According to the type of instrument specific roughness parameters should be used for defining the printing plate surfaces. New surface roughness parameters were defined in order to insure detailed characterisation of the printing plates in graphic reproduction process
Sharma, Satinder K.; Barthwal, Sumit
The effect of plasma immersion ion implantation (PIII) treatment on silicon surfaces was investigated by micro-Raman and atomic force microscopy (AFM) technique. The surface damage was given by the implantation of carbon, nitrogen, oxygen and argon ions using an inductively coupled plasma (ICP) source at low pressure. AFM studies show that surface topography of the PIII treated silicon wafers depend on the physical and chemical nature of the implanted species. Micro-Raman spectra indicate that the significant reduction of intensity of Raman peak after PIII treatment. Plasma immersion ion implantation is a non-line-of-sight ion implantation method, which allows 3D treatment of materials. Therefore, PIII based surface modification and plasma immersion ion deposition (PIID) coatings are applied in a wide range of situations.
In this work, the main problems concerning the scattering of light by real surfaces and films are presented in view of results obtained with the bidirectional reflection distribution function (BRDF) method and optical profilometry (OP). The BRDF and OP studies, being complementary to the atomic force microscopy (AFM), allow one to get information about surface topography. From the optical data, the surface power spectral density (PSD) functions for absorbing and transparent rough films have been found. Both functions have been evaluated from the Fourier transform (FT) of the surface profiles. The usefulness of BRDF-and OP methods in characterization of real surfaces is demonstrated when analyzing the optical data obtained for metallic TiN-and organic PVK thin films deposited on various substrates
Jaglarz, Janusz [Institute of Physics, Cracow University of Technology, ul. Podchoraz.ych 1, 30-084 Krakow (Poland)], E-mail: email@example.com
In this work, the main problems concerning the scattering of light by real surfaces and films are presented in view of results obtained with the bidirectional reflection distribution function (BRDF) method and optical profilometry (OP). The BRDF and OP studies, being complementary to the atomic force microscopy (AFM), allow one to get information about surface topography. From the optical data, the surface power spectral density (PSD) functions for absorbing and transparent rough films have been found. Both functions have been evaluated from the Fourier transform (FT) of the surface profiles. The usefulness of BRDF-and OP methods in characterization of real surfaces is demonstrated when analyzing the optical data obtained for metallic TiN-and organic PVK thin films deposited on various substrates.
Full Text Available AIM:To investigate how to design personalized cataract surgery programs to achieve surgical correction of preoperative corneal astigmatism with surgical astigmatism under the guidance of corneal topography, improve postoperative visual quality and reduce the cost of treatment. METHODS: Totally 202 cases(226 eyescataract patients were divided into randomized treatment group and individualized treatment group. According to the method and location of the incision, randomized treatment group were divided into 8 groups. Surgical astigmatism after different incision were calculated with the use of preoperative and postoperative corneal astigmatism through vector analysis method. Individualized treatment groups were designed personably for surgical method with reference of every surgically induced astigmatism, the surgical method chooses the type of surgical incision based on close link between preoperative corneal astigmatism and surgically induced astigmatism, and the incision was located in the steep meridian. The postoperative corneal astigmatism of individualized treatment group was observed. RESULTS: Postoperative corneal astigmatism of individualized treatment group were lower than that of 3.0mm clear corneal tunnel incision in the randomized treatment group, there were statistically significance difference, while with 3.0mm sclera tunnel incision group there were no statistically significance difference. After 55.8% of patients with the use of individualized surgical plan could undergo the operation of extracapsular cataract extraction with relatively low cost and rigid intraocular lens implantation, the per capita cost of treatment could be reduced. CONCLUSION: Personalized cataract surgery programs are designed to achieve surgical correction of preoperative corneal astigmatism under the use of corneal topography, improve postoperative visual quality and reduce the cost of treatment.
Huang, C.; White, I.; Thwaite, E.G.; Bendeli, A.
Soil surface topography profoundly influences runoff hydrodynamics, soil erosion, and surface retention of water. Here we describe an optical noncontact system for measuring soil surface topography. Soil elevation is measured by projecting a laser beam onto the surface and detecting the position of the interception point. The optical axis of the detection system is oriented at a small angle to the incident beam. A low-power HeNe (Helium-Neon) laser is used as the laser source, a photodiode array is used as the laser image detector and an ordinary 35-mm single lens reflex camera provides the optical system to focus the laser image onto the diode array. A wide spectrum of measurement ranges (R) and resolutions are selectable, from 1 mm to 1 m. These are determined by the laser-camera distance and angle, the focal length of the lens, and the sensing length of the diode array and the number of elements (N) contained in the array. The resolution of the system is approximately R/2N. We show for the system used here that this resolution is approximately 0.2%. In the configuration selected, elevation changes of 0.16 mm could be detected over a surface elevation range of 87 mm. The sampling rate of the system is 1000 Hz, which permits soil surfaces to be measured at speeds of up to 1 m s −1 with measurements taken at 1-mm spacing. Measurements of individual raindrop impacts on the soil and of soil surfaces before and after rain show the versatility of the laser surface profiler, which has applications in studies of erosion processes, surface storage and soil trafficability
Full Text Available We here reconstruct the paleotopography of Northern Hemisphere ice sheets during the glacial maxima of marine isotope stages (MIS 5b and 4.We employ a combined approach, blending geologically based reconstruction and numerical modeling, to arrive at probable ice sheet extents and topographies for each of these two time slices. For a physically based 3-D calculation based on geologically derived 2-D constraints, we use the University of Maine Ice Sheet Model (UMISM to calculate ice sheet thickness and topography. The approach and ice sheet modeling strategy is designed to provide robust data sets of sufficient resolution for atmospheric circulation experiments for these previously elusive time periods. Two tunable parameters, a temperature scaling function applied to a spliced Vostok–GRIP record, and spatial adjustment of the climatic pole position, were employed iteratively to achieve a good fit to geological constraints where such were available. The model credibly reproduces the first-order pattern of size and location of geologically indicated ice sheets during marine isotope stages (MIS 5b (86.2 kyr model age and 4 (64 kyr model age. From the interglacial state of two north–south obstacles to atmospheric circulation (Rocky Mountains and Greenland, by MIS 5b the emergence of combined Quebec–central Arctic and Scandinavian–Barents-Kara ice sheets had increased the number of such highland obstacles to four. The number of major ice sheets remained constant through MIS 4, but the merging of the Cordilleran and the proto-Laurentide Ice Sheet produced a single continent-wide North American ice sheet at the LGM.
Full Text Available By 1960, Britain’s once-thriving Music Hall industry was virtually dead. Theatres with their faded notions of Empire gave way to Cinema and the threat of Television. Where thousands once linked arms singing popular songs, watch acrobatics, see feats of strength, and listen to risqué jokes, now the echoes of those acts lay as whispers amongst the stalls’ threadbare seats. The Halls flourished in the 19th Century, but had their origins in the taverns of the 16th and 17th Centuries. Minstrels plied their trade egged on by drunken crowds. As time passed, the notoriety of the Music Hall acts and camaraderie produced grew. Entrepreneurial businessman tapped into this commerciality and had purpose-built status symbol theatres to provide a ‘home’ for acts and punters. With names like The Apollo giving gravitas approaching Olympian ideals, so the owners basked in wealth and glory. The Music Hall became the mass populist entertainment for the population. Every town had one, where everyone could be entertained by variety acts showing off the performers’ skills. The acts varied from singers, joke-tellers, comics, acrobats, to dancers. They all aimed to entertain. They enabled audiences to share a symbiotic relationship with one another; became recruitment officers for the Army; inspired War Poets; showed short films; and they and the halls reflected both the ideals and foibles of their era. By using Raymond Williams’ structures of feeling as its cornerstone, the article will give a brief history of the halls, whilst providing analysis into how they grew into mass populist entertainment that represented British culture. Case studies of famous artistes are given, plus an insight into how Music Hall segued into radio, film and television.
Spindle, Tory R; Breland, Alison B; Karaoghlanian, Nareg V; Shihadeh, Alan L; Eissenberg, Thomas
Electronic cigarettes (ECIGs) heat a nicotine-containing solution; the resulting aerosol is inhaled by the user. Nicotine delivery may be affected by users' puffing behavior (puff topography), and little is known about the puff topography of ECIG users. Puff topography can be measured using mouthpiece-based computerized systems. However, the extent to which a mouthpiece influences nicotine delivery and subjective effects in ECIG users is unknown. Plasma nicotine concentration, heart rate, and subjective effects were measured in 13 experienced ECIG users who used their preferred ECIG and liquid (≥ 12 mg/ml nicotine) during 2 sessions (with or without a mouthpiece). In both sessions, participants completed an ECIG use session in which they were instructed to take 10 puffs with 30-second inter-puff intervals. Puff topography was recorded in the mouthpiece condition. Almost all measures of the effects of ECIG use were independent of topography measurement. Collapsed across session, mean plasma nicotine concentration increased by 16.8 ng/ml, and mean heart rate increased by 8.5 bpm (ps topography measurement equipment, ECIG-using participants took larger and longer puffs with lower flow rates. In experienced ECIG users, measuring ECIG topography did not influence ECIG-associated nicotine delivery or most measures of withdrawal suppression. Topography measurement systems will need to account for the low flow rates observed for ECIG users. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: firstname.lastname@example.org.
Ephemeral streams with sand and gravel beds may inherit bed topography caused by previous flow events, resulting in bed topography that is not in equilibrium with flow conditions, complicating the modeling of flow and sediment transport. Major flow events, resulting from rainfall with high intensity...
Knudsen, Per; Andersen, Ole Baltazar; Maximenko, Nikolai
An update to the global mean dynamic topography model DTU13MDT is presented. For DTU15MDT the newer gravity model EIGEN-6C4 has been combined with the DTU15MSS mean sea surface model to construct this global mean dynamic topography model. The EIGEN-6C4 is derived using the full series of GOCE data...
Santhiago, Marcony R; Smadja, David; Wilson, Steven E; Krueger, Ronald R; Monteiro, Mario L R; Randleman, J Bradley
To investigate the association of the percent tissue altered (PTA) with the occurrence of ectasia after LASIK in eyes with suspicious preoperative corneal topography. This retrospective comparative case-control study compared associations of reported ectasia risk factors in 129 eyes, including 57 eyes with suspicious preoperative Placido-based corneal topography that developed ectasia after LASIK (suspect ectasia group), 32 eyes with suspicious topography that remained stable for at least 3 years after LASIK (suspect control group), and 30 eyes that developed ectasia with bilateral normal topography (normal topography ectasia group). Groups were subdivided based on topographic asymmetry into high- or low-suspect groups. The PTA, preoperative central corneal thickness (CCT), residual stromal bed (RSB), and age (years) were evaluated in univariate and multivariate analyses. Average PTA values for normal topography ectasia (45), low-suspect ectasia (39), high-suspect ectasia (36), low-suspect control (32), and high-suspect control (29) were significantly different from one another in all comparisons (P topography ectasia groups, and CCT was not significantly different between any groups. Stepwise logistic regression revealed the PTA as the most significant independent variable (P topography. Less tissue alteration, or a lower PTA value, was necessary to induce ectasia in eyes with more remarkable signs of topographic abnormality, and PTA provided better discriminative capabilities than RSB for all study populations. Copyright 2015, SLACK Incorporated.
Kaneko, Takuya; Ye, Bing
To encode the positions of sensory stimuli, sensory circuits form topographic maps in the central nervous system through specific point-to-point connections between pre- and postsynaptic neurons. In vertebrate visual systems, the establishment of topographic maps involves the formation of a coarse topography followed by that of fine-scale topography that distinguishes the axon terminals of neighboring neurons. It is known that intrinsic differences in the form of broad gradients of guidance molecules instruct coarse topography while neuronal activity is required for fine-scale topography. On the other hand, studies in the Drosophila visual system have shown that intrinsic differences in cell adhesion among the axon terminals of neighboring neurons instruct the fine-scale topography. Recent studies on activity-dependent topography in the Drosophila somatosensory system have revealed a role of neuronal activity in creating molecular differences among sensory neurons for establishing fine-scale topography, implicating a conserved principle. Here we review the findings in both Drosophila and vertebrates and propose an integrated model for fine-scale topography.
The presence of topography poses a challenge for seismic modeling with finite-difference codes. The representation of topography by means of an air layer or vacuum often leads to a substantial loss of numerical accuracy. A suitable modification of the finite-difference weights near the free
Yang Shaohua; Wu Fugen; Zhong Huilin; Zhong Lanhua
In this Letter, the band structures and band gaps of liquid surface waves propagating over two-dimensional periodic topography was investigated by plane-waves expansion method. The periodic topography drilled by square hollows with square lattice was considered. And the effects of the filling fraction and the orientation of bottom-hollows on the band gaps are investigated in detail
Polak, L.; Wijngaarden, Rinke J.
Kelvin Probe Force Microscopy (KPFM) on samples with rough surface topography can be hindered by topography correlated artifacts. We show that, with the proper experimental configuration and using homogeneously metal coated probes, we are able to obtain amplitude modulation (AM) KPFM results on a
The control of biomaterial surface topography is emerging as a tool to influence cells and tissues. Due to a lack a theoretical framework of the underlying molecular mechanisms, high-throughput screening (HTS) technology is valuable to identify and study bioactive surface topographies. To identify
Bronsveld, Heleen K; Peeters, Paul J H L; de Groot, Mark C H
Aims: To quantify breast cancer incidence in women with type-2 diabetes and assess age-standardized trends in invasive breast cancer incidence over time and by age groups. Methods: A population-based cohort study was conducted using the British general practice database (Clinical Practice Research...... Datalink) using data from 1989 to 2012. All adult women prescribed anti-hyperglycemic medication were selected and matched (1:1) on age and clinical practice to a reference cohort without diabetes. Results: During approximately 1.6 million person years (py), 2371 breast cancer cases were diagnosed...... that observed in the reference cohort (148, 95%CI:141-156); with an incidence rate ratio (IRR) of 1.01 (95%CI:0.94-1.08, p. >. 0.05). Conclusions: Currently, around 2880 women with type-2 diabetes are diagnosed with breast cancer per year in the United Kingdom. However, breast cancer incidence remained stable...
Kanagala, P; Bradley, C; Hoffman, P; Steeds, R P
The clinical utility of transoesophageal echocardiography (TOE) is well established. Being a semi-invasive procedure, however, the potential for transmission of infection between sequential patients exists. This has implications for the protection of both patients and medical staff. Guidelines for disinfection during gastrointestinal endoscopy (GIE) have been in place for many years.(1,2) Unfortunately, similar guidance is lacking with respect to TOE. Although traversing the same body cavities and sharing many similarities with upper GIE, there are fundamental structural and procedural differences with TOE which merit special consideration in establishing a decontamination protocol. This document provides recommendations for TOE probe decontamination based on the available evidence, expert opinion, and modification of the current British Society of Gastroenterology guidelines.
Michalski, J; Pawlus, P; Zelasko, W
The present paper presents the analysis of surface topography of gear teeth as the result of final machining processes. Teeth of multiple cylindrical gears shaped by grinding were smoothed in abrasive mass, honed or shot peened. The measurement of gears were made using coordinate measuring machine and 3D surface topography stylus instrument. The following deviations were studied; pitch deviation, total pitches deviations, variation of teeth thickness and deviation of gear radial run-out. Changes in teeth surface topography during machining process were determined. 3D surface topography parameters, surface directionality as well as areal autocorrelation and power spectral density functions were taken into consideration. As the results of the analysis, the best surface topography with regard to gear operational properties was recommended.
Fujii, Naoki; Ikeno, Masaaki; Sakakiyama, Tsutomu; Matsuyama, Masafumi; Takao, Makoto; Mukohara, Takeshi
Numerical model of topography change is important to examine collapse of the harbor facilities by sand transport due to tsunami. Problems for evaluation of sand transport due to tsunami with topography change model are in precision of the numerical model and topography change data. Therefore, we installed the harbor in large-scaled wave tank and carried out experiment about tsunami flow and topography change to get those detailed data. For results provided by experimental test, we applied the topography change model of Ikeno et al. (2009a) and evaluated it about the reproduction characteristics. As a result, it was confirmed that reproduction of an experiment improved by using new pickup rate formula proposed by Ikeno et al. (2009a). (author)
Kunnavatana, S Shanun; Wolfe, Katie; Aguilar, Alexandra N
Functional communication training (FCT) is a common function-based behavioral intervention used to decrease problem behavior by teaching an alternative communication response. Therapists often arbitrarily select the topography of the alternative response, which may influence long-term effectiveness of the intervention. Assessing individual mand topography preference may increase treatment effectiveness and promote self-determination in the development of interventions. This study sought to reduce arbitrary selection of FCT mand topography by determining preference during response training and acquisition for two adults with autism who had no functional communication skills. Both participants demonstrated a clear preference for one mand topography during choice probes, and the preferred topography was then reinforced during FCT to reduce problem behavior and increase independent communication. The implications of the results for future research on mand selection during FCT are discussed.
Xiao, Xiongwu; Guo, Bingxuan; Li, Deren; Zhang, Peng; Zang, Yu-fu; Zou, Xianjian; Liu, Jian-chen
The real-time, accurate measurement of submerged topography is vital for the analysis of riverbed erosion and deposition. This paper describes a novel method of measuring submerged topography in the B-scan image obtained using an ultrasound imaging device. Results show the distribution of gray values in the image has a process of mutation. This mutation process can be used to adaptively track the topographic lines between riverbed and water, based on the continuity of topography in the horizontal direction. The extracted topographic lines, of one pixel width, are processed by a wavelet filtering method. Compared with the actual topography, the measurement accuracy is within 1 mm. It is suitable for the real-time measurement and analysis of all current model topographies with the advantage of good self-adaptation. In particular, it is visible and intuitive for muddy water in the movable-bed model experiment. (paper)
Phillips-Howard, P A; Radalowicz, A; Mitchell, J; Bradley, D J
OBJECTIVES--To identify which British residents travelling abroad are at greatest risk of malaria infection, and to determine the efficacy of malaria chemoprophylaxis for preventing P falciparum infections in tropical Africa. DESIGN--Prospective cohort study (case-base linkage) with routine national surveillance systems. Denominators (base population) were obtained from monitoring a random sample of returning British travellers with the international passenger survey. Numerators (cases) were obtained from reports of malaria infections in British residents, through the Malaria Reference Laboratory network. SETTING--International passenger survey conducted at passport control of international airports in Britain. Malaria reports received nationally were collated centrally in London. SUBJECTS--2948 British residents (0.2%) returning to Britain in 1987 randomly selected and questioned and 1052 British residents with microscopically confirmed malaria infections in 1987, whose case reports were reviewed and on whom additional data were collected by postal survey. MAIN OUTCOME MEASURES--Annual incidence subdivided by categories of risk. Chemoprophylactic efficacy for east and west Africa by principal regimens and compliance. RESULTS--Annual rates of reported infection per 100,000 travellers to Oceania were 4100; to west and east Africa were 375 and 172 respectively; to Latin America, the Far East, and the Middle East were 12, 2, and 1 respectively. Immigrants visiting friends and relatives in Ghana and Nigeria were at greatest risk (1303 and 952 per 100,000 respectively) in west Africa. Business travellers to Kenya experienced the highest attack rates in east Africa (465 per 100,000). Age-sex specific attack rates varied by region. No prophylaxis was reported to have been used by 23% of British visitors to west Africa, 17% to east Africa, 46% to central or southern Africa, and 58% visiting south Asia. The efficacy of chloroquine plus proguanil against P falciparum
Williams, S A; Godson, J H; Ahmed, I A
British Asians represent a substantial proportion of the population in some parts of the United Kingdom, yet many fail to use dental services regularly. This study aimed to investigate dentists' concerns about providing care for this client group. Following a pilot study, a postal questionnaire was sent to general dental practitioners and community dental officers working in seven family health services authority localities. Of 1546 questionnaires circulated, 639 (41 per cent) were returned. The language barrier was most frequently identified as a major impediment to care (78 per cent), followed by patients' understanding of treatment proposed (67 per cent), while 64 per cent found difficulty obtaining medical histories. Only 20 per cent considered that gaining consent for treatment was a problem. Other issues concerned attendance as casual patients (65 per cent) and, in terms of treatment provided, difficulties with preventive (77 per cent), periodontal (66 per cent) and orthodontic care (27 per cent). The proportion of dentists identifying barriers to care reflected the English-speaking abilities of different Asian populations. Compared with the high percentage mentioning language, understanding and medical history, the small proportion of dentists who thought that consent was of concern suggests that concepts of consent may need to be questioned. Despite the low response rate, the high proportion of respondents identifying these issues implies that the present position may put patients' health at risk, restrict treatment options and offer a potential for litigation. Future initiatives to overcome barriers to appropriate care must address the perspectives of dentists treating British Asians, as well as that of the client group.
Yang, Bijou; Lester, David; James, Simon
This study compared the attitudes toward online shopping of British and American individuals. Using a sample of 327 British and American university students, the British respondents were found to have less favorable attitudes toward online shopping. Attitudes toward online shopping were found to be significant predictors of making online purchases. The implications of these results were discussed and suggestions made for future research.
Stanwick, Peter A.
This paper discusses the evolution of capitalism in British and American literature. The impact of capitalism on the lives of individuals has been well represented in both American and British literature throughout the centuries. The paper will discuss how seminal British authors such as Thomas More, William Shakespeare, Charles Dickens and George…
British colonial rule has often been praised for its comparatively benign features, such as its support of local educational development. This study argues that the impact of British educational policies and investments on the supply of schooling in British Africa should not be overstated. Until
The UK's 2016 decision to exit the European Union and the discussion surrounding it indicate that public understanding of British identity has important consequences, one way or another. Defining British identity will be an important task in the years to come. The UK government not long ago provided some guidance on the matter of British identity…
I argue that political philosopher Charles W. Mills' twin concepts of 'the epistemology of ignorance' and 'white ignorance' are useful tools for thinking through racial injustice in the British education system. While anti-racist work in British education has a long history, racism persists in British primary, secondary and tertiary education. For…
Biggs, Manus J P; Richards, R Geoff; Gadegaard, Nikolaj; McMurray, Rebecca J; Affrossman, Stanley; Wilkinson, Chris D W; Oreffo, Richard O C; Dalby, Mathew J
Polymeric medical devices widely used in orthopedic surgery play key roles in fracture fixation and orthopedic implant design. Topographical modification and surface micro-roughness of these devices regulate cellular adhesion, a process fundamental in the initiation of osteoinduction and osteogenesis. Advances in fabrication techniques have evolved the field of surface modification; in particular, nanotechnology has allowed the development of nanoscale substrates for the investigation into cell-nanofeature interactions. In this study human osteoblasts (HOBs) were cultured on ordered nanoscale pits and random nano "craters" and "islands". Adhesion subtypes were quantified by immunofluorescent microscopy and cell-substrate interactions investigated via immuno-scanning electron microscopy. To investigate the effects of these substrates on cellular function 1.7 k microarray analysis was used to establish gene profiles of enriched STRO-1+ progenitor cell populations cultured on these nanotopographies. Nanotopographies affected the formation of adhesions on experimental substrates. Adhesion formation was prominent on planar control substrates and reduced on nanocrater and nanoisland topographies; nanopits, however, were shown to inhibit directly the formation of large adhesions. STRO-1+ progenitor cells cultured on experimental substrates revealed significant changes in genetic expression. This study implicates nanotopographical modification as a significant modulator of osteoblast adhesion and cellular function in mesenchymal populations.
Tchamen, G. W.; Kahawita, R. A.
The numerical simulation of free surface flows that alternately flood and dry out over complex topography is a formidable task. The model equation set generally used for this purpose is the two-dimensional (2D) shallow water wave model (SWWM). Simplified forms of this system such as the zero inertia model (ZIM) can accommodate specific situations like slowly evolving floods over gentle slopes. Classical numerical techniques, such as finite differences (FD) and finite elements (FE), have been used for their integration over the last 20-30 years. Most of these schemes experience some kind of instability and usually fail when some particular domain under specific flow conditions is treated. The numerical instability generally manifests itself in the form of an unphysical negative depth that subsequently causes a run-time error at the computation of the celerity and/or the friction slope. The origins of this behaviour are diverse and may be generally attributed to:1. The use of a scheme that is inappropriate for such complex flow conditions (mixed regimes).2. Improper treatment of a friction source term or a large local curvature in topography.3. Mishandling of a cell that is partially wet/dry.In this paper, a tentative attempt has been made to gain a better understanding of the genesis of the instabilities, their implications and the limits to the proposed solutions. Frequently, the enforcement of robustness is made at the expense of accuracy. The need for a positive scheme, that is, a scheme that always predicts positive depths when run within the constraints of some practical stability limits, is fundamental. It is shown here how a carefully chosen scheme (in this case, an adaptation of the solver to the SWWM) can preserve positive values of water depth under both explicit and implicit time integration, high velocities and complex topography that may include dry areas. However, the treatment of the source terms: friction, Coriolis and particularly the bathymetry
Full Text Available Surface topographical features on biomaterials, both at the submicrometre and nanometre scales, are known to influence the physicochemical interactions between biological processes involving proteins and cells. The nanometre-structured surface features tend to resemble the extracellular matrix, the natural environment in which cells live, communicate, and work together. It is believed that by engineering a well-defined nanometre scale surface topography, it should be possible to induce appropriate surface signals that can be used to manipulate cell function in a similar manner to the extracellular matrix. Therefore, there is a need to investigate, understand, and ultimately have the ability to produce tailor-made nanometre scale surface topographies with suitable surface chemistry to promote favourable biological interactions similar to those of the extracellular matrix. Recent advances in nanoscience and nanotechnology have produced many new nanomaterials and numerous manufacturing techniques that have the potential to significantly improve several fields such as biological sensing, cell culture technology, surgical implants, and medical devices. For these fields to progress, there is a definite need to develop a detailed understanding of the interaction between biological systems and fabricated surface structures at both the micrometre and nanometre scales.
Lorenz, R. D.; Cassini Radar Team
Although topographic coverage of Titan is and will remain sparse, some significant results have been obtained from global, regional and local measurements, via stereo, radarclinometry (shape-from-shading), autostereo (deviation from an assumed symmetric shape due to the inclined incidence), altimetry and SARtopo (monopulse) techniques. The global ellipsoidal shape (Zebker et al., 2009) provides important geophysical constraints on the interior. Hypsometry (Lorenz et al., 2011) provides insight into the balance of constructional and erosive processes and the strength of the lithosphere. Some local observations to be summarized in the talk include the measurement of mountains, the quantification of slopes that divert dunes and that drive fluid flow in river networks, as well as depth measurement of several impact craters and the assessment of candidate cryovolcanic structures. A recent new observation is a long altimetry pass T77 along the equator at the western edge of Xanadu, acquired both to constrain Titan's global shape and to understand the surface slopes and properties that may maintain the striking contrast between the dune fields of Shangri-La and the rugged and radiometrically anomalous Xanadu region. T77 also featured a SAR observation of the Ksa impact structure (discovered in SAR on T17), allowing a stereo DEM to be constructed. A feature shared by Earth and Titan is the ephemeral topography of liquids on the surface. Titan's lakes and seas likely vary in depth on geological (Myr-Gyr) and astronomical (~10 kyr) timescales : the depth of Ontario Lacus has been observed to vary on a seasonal timescale (~1 m/yr). Periodic changes of the order of 0.2-5m may occur diurnally, forced by Saturn gravitational tides. Finally, waves may be generated, at least during the windy season (which for Titan's north may be just about to begin) which can be constrained by radar and optical scattering measurements. Looking to the future, a Phase A study of the Titan Mare
Ionescu, Ioan R.
In this paper we have developed a robust numerical algorithm for the visco-plastic Saint-Venant model with topography. For the time discretization an implicit (backward) Euler scheme was used. To solve the resulting nonlinear equations, a four steps iterative algorithm was proposed. To handle the non-differentiability of the plastic terms an iterative decomposition-coordination formulation coupled with the augmented Lagrangian method was adopted. The proposed algorithm is consistent, i.e. if the convergence is achieved then the iterative solution satisfies the nonlinear system at each time iteration. The equations for the velocity field are discretized using the finite element method, while a discontinuous Galerkin method, with an upwind choice of the flux, is adopted for solving the hyperbolic equations that describe the evolution of the thickness. The algorithm permits to solve alternatively, at each iteration, the equations for the velocity field and for the thickness. The iterative decomposition coordination formulation coupled with the augmented Lagrangian method works very well and no instabilities are present. The proposed algorithm has a very good convergence rate, with the exception of large Reynolds numbers (Re≫1000), not involved in the applications concerned by the shallow viscoplastic model. The discontinuous Galerkin technique assure the mass conservation of the shallow system. The model has the exact C-property for a plane bottom and an asymptotic C-property for a general topography. Some boundary value problems were selected to analyze the robustness of the numerical algorithm and the predictive capabilities of the mechanical model. The comparison with an exact rigid flow solution illustrates the accuracy of the numerical scheme in handling the non-differentiability of the plastic terms. The influence of the mesh and of the time step are investigated for the flow of a Bingham fluid in a talweg. The role of the material cohesion in stopping a
British Coal Enterprise (BCE) has continued to provide business advice, counselling and financial assistance to small businesses in UK coal mining regions. In 1990, against a background of recession, BCE helped create or safeguard 9,300 jobs. Investment in new projects has continued at a low level. BCEs range of services include provision of loans for new or existing businesses, running of managed workshops to help new businesses start up, provision of small premises to expanding businesses, placement of ex-British Coal and other redundant workers in new employment through Job Shops and helping employers to recruit and train management teams when locating or expanding in the coalfields. The annual report details achievements in these fields within seven coal mining regions of Britain.
In this review, the author describes the development of British infrared astronomy, from its beginnings around 1960 to the present time. The paper outlines the various techniques available and the different wavelength ranges which can be covered by these techniques e.g. balloons, mountain-based telescopes, the AAT in Australia, the 60-inch flux-collector on Tenerife, and the UKIRT telescope on Hawaii, and finally the IRAS satellite. The main groups involved in the British infrared work are UCL, Imperial College, and QMC, together with cooperative programmes with the Netherlands and the USA. The scientific results which have been obtained with these installations include studies of the relict radiation, HII regions, thermal radiation from dust and grains, and a dust shell around the star Vega, to mention but a few, interferometry, photometry and spectroscopy are also discussed, as in the long awaited development of infrared detector arrays. (UK)
Mohamed S Al-Moamary
Full Text Available Mycobacterium malmoense was first described in northern Europe and the United Kingdom in 1977. Since then, reports have appeared with increasing frequency. Cases have, however, rarely been reported from the United States, and, until now, none have been reported in Canada. This may reflect either true low prevalence of the disease or underdiagnosis by laboratories due to slow growth of the organism. This report describes a case of pulmonary disease caused by M malmoense in a 44-year-old man from British Columbia who was successfully treated with an 18-month course of conventional antituberculous drugs combined with a macrolide. This is the first report of this disease in British Columbia and, to our knowledge, in Canada.
Poster Presentation at the International Applied Military Psychology Symposium (IAMPS) 2016. The British Army must identify its future generals from its officer cadets and retain them for their 35 year career. There is no written contract and the psychological contract differs considerably as they progress through the ranks with different jobs and remuneration. The PhD will identify how officer talent is managed in current policy, which will be cross-referenced against...
Brown, S.; Taylor, K.
In this paper, we explore the relationship between expectations and reservation wages for a sample of unemployed individuals using panel data drawn from the British Household Panel Survey, 1996 to 2005. To be specific, we initially investigate the determinants of expectations relating to the individual´s financial situation and employment prospects over the next 12 months. Our findings suggest that job search and education are positively associated with financial optimism and confidence regar...