WorldWideScience

Sample records for brazilian electrical system

  1. Probabilistic risk benchmark of the Brazilian electrical system; Risco probabilistico de referencia do sistema eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Neyl Hamilton Martelotta

    2002-05-01

    The main goal of this dissertation is to proceed a first numerical evaluation of the probabilistic risks magnitudes associated with the Brazilian Electrical network, considering the subsystems North, Northeast, South, Southeast and Mid West. This result is relevant because it can be used as an initial comparative reference for future reliability studies of the Brazilian Basic Grid. As a by-product, the whole set of criteria and procedures used in the work are described in detail. They may also serve as a preliminary base for future similar evaluations. (author)

  2. Globalization, economy financing model crisis and the institutional re-structuration of the Brazilian electric power system; Globalizacao, crise do padrao de financiamento da economia e reestruturacao institucional do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Maciel, Claudio Schuller

    1995-12-31

    This thesis discusses the crisis in the Brazilian economical financing model and the consequent re-structuration of the Brazilian electric power system, giving special emphasis to: global historical factors; the new economic order; and, the consequences of the financial crisis in the Brazilian electric power system. In addition, it suggests new strategies for the institutional reformulation of the Brazilian electric power system 226 refs., 13 tabs.

  3. Assessing incentive policies for integrating centralized solar power generation in the Brazilian electric power system

    International Nuclear Information System (INIS)

    This study assesses the impacts of promoting, through auctions, centralized solar power generation (concentrated solar power – CSP, and photovoltaic solar panels – PV) on the Brazilian power system. Four types of CSP plants with parabolic troughs were simulated at two sites, Bom Jesus da Lapa and Campo Grande, and PV plants were simulated at two other sites, Recife and Rio de Janeiro. The main parameters obtained for each plant were expanded to other suitable sites in the country (totaling 17.2 GW in 2040), as inputs in an optimization model for evaluating the impacts of the introduction of centralized solar power on the expansion of the electricity grid up to 2040. This scenario would be about USD$ 185 billion more expensive than a business as usual scenario, where expansion solely relies on least-cost options. Hence, for the country to incentivize the expansion of centralized solar power, specific auctions for solar energy should be adopted, as well as complementary policies to promote investments in R and D and the use of hybrid systems based on solar and fuels in CSP plants. - Highlights: • We assess the impacts of promoting centralized CSP and PV by auctions in Brazil. • We simulate energy scenarios with and without solar power. • Our solar scenario leads to 17 GW of solar capacity installed between 2020 and 2040. • This solar scenario is some USD$ 185 billion more expensive than the base case

  4. A 'destination port' for the Brazilian electric system. Characteristics of the Brazilian integrated electric systems and forecasting up to the year 2035

    International Nuclear Information System (INIS)

    In order to establish a policy for the Electric System in Brazil it is necessary to foresee its future. In a predominantly hydroelectric system where thermal complementation is being introduced, a thirty-year horizon seems to be adequate for forecasting its port of destination and establishing its route to get there. The study describes the existing model, studies its regulation and projects the macro economic scenario, the electricity demand and the necessary generation park. (author)

  5. Heat-electricity convertion systems for a Brazilian space micro nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Lamartine N.F.; Marcelino, Natalia B.; Placco, Guilherme M.; Nascimento, Jamil A.; Borges, Eduardo M., E-mail: guimarae@ieav.cta.br, E-mail: lamartine.guimaraes@pq.cnpq.br, E-mail: jamil@ieav.cta.br, E-mail: jalnsgf@outlook.com, E-mail: borges.em@hotmail.com, E-mail: ecorborges@hotmail.com, E-mail: ivayolini@gmail.com, E-mail: guilherme_placco@ig.com.br [Instituto de Estudos Avancados (IEAv/DCTA), Sao Jose dos Campos, SP (Brazil); Barrios Junior, Ary Garcia, E-mail: arygarcia89@yahoo.com [Faculdade de Tecnologia Sao Francisco (FATESF), Jacarei, SP (Brazil)

    2013-07-01

    This contribution will discuss the evolution work in the development of thermal cycles to allow the development of heat-electricity conversion for the Brazilian space micro nuclear Reactor. Namely, innovative core and nuclear fuel elements, Brayton cycle, Stirling engine, heat pipes, passive multi-fluid turbine, among others. This work is basically to set up the experimental labs that will allow the specification and design of the space equipment. Also, some discussion of the cost so far, and possible other applications will be presented. (author)

  6. Nuclear policy retrospection in Brazil and forecasting for using of small nuclear power plants - SNPs - in the Brazilian electric system

    International Nuclear Information System (INIS)

    This thesis highlights the nuclear energy perspectives to regain a prominent place in the world energy mix, as a competitive and safe energy source. Just considering the current international changes in the nuclear power features in the developed countries, it is assessed the suitability and feasibility of defining a new nuclear policy in Brazil, based on the development of small and medium nuclear power reactors - SMNPR. The SMNPR's may be a good nuclear strategy for Brazil to develop a national and evolutionary reactor design with several improvements in safety, by means of passive safety systems. This reactor may play a significant role in the brazilian electrical system in the long term. (author)

  7. Improvement of the electric power sector through the access to the national power transmission system - SINTREL (Brazilian National System of Electric Power Transmission); Aperfeicoamento do setor de energia eletrica atraves do acesso a transmissao - SINTREL (Sistema Nacional de Transmissao de Energia Eletrica)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-04-01

    This report presents the organization and the operation of SINTREL (Brazilian National System of Electric Power Transmission), the national power transmission system, and it defines its function in the process of reform of the Brazilian electric sector. Besides showing the traditional organization of the companies and of the electric system, and the evolution of the organization of the Brazilian electric system to favor the competition.

  8. Brazilian hybrid electric fuel cell bus

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, P.E.V.; Carreira, E.S. [Coppe-Federal Univ. of Rio de Janeiro (Brazil). Hydrogen Lab.

    2010-07-01

    The first prototype of a hybrid electric fuel cell bus developed with Brazilian technology is unveiled. It is a 12 m urban-type, low-floor, air-conditioned bus that possesses three doors, air suspension, 29 seats and reversible wheelchair site. The bus body was built based on a double-deck type monoblock vehicle that is able to sustain important load on its roof. This allowed positioning of the type 3 hydrogen tanks and the low weight traction batteries on the roof of the vehicles without dynamic stabilization problems. A novel hybrid energy configuration was designed in such a way that the low-power (77 kWe) fuel cell works on steady-state operation mode, not responding directly to the traction motor load demand. The rate of kinetic energy regeneration upon breaking was optimized by the use of an electric hybrid system with predominance of batteries and also by utilizing supercapacitors. The electric-electronic devices and the security control softwares for the auxiliary and traction systems were developed in-house. The innovative hybrid-electric traction system configuration led to the possibility to decrease the fuel cell power, with positive impact on weight and system volume reduction, as well as to significantly decrease the hydrogen consumption. (orig.)

  9. Integration of wind power plants into the electric system. The Brazilian experience

    Energy Technology Data Exchange (ETDEWEB)

    Arteiro, Francisco; Gomes, Paulo [Operador Nacional do Sistema Eletrico (ONS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    shut off during disturbances which provoke underfrequency ortvoltage sags, as well as the calculation of the spinning reserve, are examples of the challenges to be faced in this new environment. If wind power generators are disconnected from the grid during system disturbances, it is clear that system security will be degraded. The bigger wind penetration degree is, the more important it is to assess the system dynamic performance in details. In other words, under normal conditions, 6he objective is to operate the system as economically as possible with sufficient security margin, and all system variables within acceptable limits. When a disturbance occurs and abnormal conditions develop, the objective is to minimize the impact of the disturbance and to restore normal conditions as quickly as possible. In order to assure the system operation as economically as possible with adequate security margin, ONS has been working hard, developing several actions to enable the integration of this new kind of generation with security. This paper describes the Brazilian experience on the integration of this kind of energy source, emphasizing lessons learned and new challenges to be faced. (orig.)

  10. The importance of reservoir regularization in the Brazilian electric system; A importancia dos reservatorios de regularizacao no sistema eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Ronaldo Antonio de; Pereira Junior, Amaro Olimpio; Livino, Angela; Moretz-Shon-David, Pedro Americo [Empresa de Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil)], emails: ronaldo.souza@epe.gov.br, amaro.pereira@epe.gov.br, angela.livino@epe.gov.br, pedro.david@epe.gov.br

    2010-07-01

    This paper presents a quantification of benefits due to reservoirs for the Brazilian power system in terms of system regularization and also in terms of greenhouse gas emission reduction because of the avoided thermal generation. The results have shown losses in firm energy for the power system, requiring other sources for power generation, which represent negatives impacts in terms of greenhouse gas emissions. (author)

  11. TRADING FORWARD IN THE BRAZILIAN ELECTRICITY MARKET

    Directory of Open Access Journals (Sweden)

    Paulo Cesar Coutinho

    2013-01-01

    Full Text Available We study the interaction between forward and spot electricity markets in a scenario where buyers and sellers are price takers in the forward market and trade through marketers, who play a Cournot game. Our model’s main features come from the Brazilian electricity market, where a free contract market coexists with a regulated contract market, and the spot price is the output of a stochastic dynamic algorithm. We are able to show that the price of energy bought (sold forward decreases (increases with the number of marketers, and that, as a result, full hedging is achieved in the limit. We also investigate the effects on prices of changes in the number of market participants and in aggregate consumption and supply, an exercise that yields important policy recommendations for the Brazilian regulator.

  12. The stochastic effects on the Brazilian Electrical Sector

    International Nuclear Information System (INIS)

    The size and characteristics of the Brazilian Electrical Sector (BES) are unique. The system includes a large-scale hydrothermal power system with many hydroelectric plants and multiple owners. Due to the historical harnessing of natural resources, the National Interconnected System (NIS) was developed outside of the economic scale of the BES. The central components of the NIS enable energy generated in any part of Brazil to be consumed in distant regions, considering certain technical configurations. This interconnection results in a large-scale complex system and is controlled by robust computational models, used to support the planning and operation of the NIS. This study presents a different vision of the SEB, demonstrating the intrinsic relationship between hydrological stochasticity and the activities executed by the system, which is an important sector of the infrastructure in Brazil. The simulation of energy scenarios is crucial to the optimal manner to operate the sector and to supporting decisions about whether expansion is necessary, thus, avoiding unnecessary costs and/or losses. These scenarios are an imposing factor in the determination of the spot cost of electrical energy, given that the simulated quantities of water in the reservoirs are one of the determinants for the short-term energy price. - Highlights: • The relationship between the hydrological regimes and the energy policy and planning in Brazil; • An overview about the stochastic effects on the Brazilian Electrical Sector; • The stochasticity associated with the Brazilian electrical planning; • The importance of hydro resources management for energy generation in Brazil;

  13. Natural-gas-powered thermoelectricity as a reliability factor in the Brazilian electric sector

    International Nuclear Information System (INIS)

    The introduction of natural-gas-powered thermoelectricity into the Brazilian generation sector can be considered as a very complex energy, economic, regulatory and institutional revision. Brazil is a country with very specific characteristics in electricity generation, as approximately 80% of the generating capacity is based on hydroelectricity, showing strong dependency on rain and management of water reservoirs. A low rate of investment in the Brazilian Electricity Industry in the period of 1995-2000, associated with periods of low rainfall, led to a dramatic lowering of the water stocks in the reservoirs. With this scenario and the growing supply of natural gas, both from within Brazil and imported, natural gas thermal electric plants became a good option to diversify the electrical supply system. In spite of the Brazilian Government's efforts to install such plants, the country was faced with severe electricity rationing in 2001. The objective of this work is to show the need to continue with the implementation of natural gas thermal electricity projects, in a manner that allows flexibility and guarantees greater working reliability for the entire Brazilian electricity sector. Taking into account the world trend towards renewable energy, the perspectives of usage of biofuels in the Brazilian Energy Matrix and in electrical energy generation are also analyzed. The very issue of electrical power efficiency in Brazil and its challenges and strategic proposals from the standpoint of Government Programs and results provided so far are presented. The technological constraints in order to put on stream the thermal electric plants are also analyzed. The article concludes with a positive perspective of the usage of natural gas as to be the third pillar in the Brazilian Energy Matrix for the years to come

  14. Lost in Translation : Interpreting the Brazilian Electric Power Privatisation Failure

    NARCIS (Netherlands)

    S. Tankha (Sunil)

    2008-01-01

    textabstractDid Latin American privatisation polices fail because of flawed implementation of fundamentally sound policies or because privatisation policies were themselves seriously flawed? Using the Brazilian electric power reforms as a narrative tool, this paper examines the causal chain assumed

  15. Reserve price: Lessons learned from Brazilian electricity procurement auctions

    International Nuclear Information System (INIS)

    Auctions have been used in several formats in the electric energy industry. In general, regulators may be uncomfortable initiating a reverse auction at a higher-than-expected final price, fearing that participants may sell their energy at an excess profitability. Nevertheless, evidence from electricity procurement auctions conducted in Brazil supports the findings that these types of auctions have the opposite effect. By attracting a larger number of agents, these auctions can trigger stronger competition and lead to lower settlement pricing. Accordingly, the Brazilian cases examined in this article present significant evidence to support this directional theory. In fact, there are some cases of electricity procurement auctions that show that inadequate auction reserve pricing leads to inefficient outcomes and may also cause the auction to fail. On the other hand, auctions with adequate price caps have led to lower final clearing prices, thus contributing to reasonable final energy pricing. - Highlights: • Outcomes from Brazilian electricity procurement auctions were analyzed. • Cases of success and frustration after adopting (in)adequate reserve prices. • Setting different price caps per source is inefficient. • Higher-than-normal price cap is more effective than fine-tuning reserve prices

  16. Photovoltaic systems connected to electric power like distributed generators: the recent situation at the PVPS-IEA and at the Brazilian scenario; Sistemas fotovoltaicos conectados a rede eletrica como geradores distribuidos: a situacao recente no PVPS-IEA e no cenario brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Quaglia, Renato Brito; Oliveira, Sergio Henrique Ferreira de [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil). Centro de Engenharia, Modelagem e Ciencias Sociais Aplicadas. Programa de Pos-Graduacao em Energia], email: renato.quaglia@ufabc.edu.br

    2008-07-01

    In this paper it is considered the use of Distributed Generation (GD) as a further option to centralized generation of electricity and treats its photovoltaic systems connected to power network (SFCR's) technology as an option in this interesting 'new' model to plan the expansion of the brazilian electrical energy matrix, mainly in urban centres. For this reason, it was necessary to mention the main characteristics of this technology as distributed generators, and the profile of his generation when connected in homes and commercial buildings. Moreover, it presents the benefits that these systems can offer the electricity sector, society and the economy. In the study of Photovoltaic Power Systems Programme (PVPS), specifically the situation of this technology in Germany, realized that the creation of mechanisms of financial incentives provided to implement some of the main barriers associated with the integration of photovoltaic systems as distributed generators. In assessing the Brazilian context, there was the incipient photovoltaic market in the country, even taking some systems already installed, note that the vast majority are intended for studies of Research and Development. There is also the exploitation of photovoltaic systems connected to the network for use in homes, businesses or industries, probably because of the lack of incentive programs for SFCR's. Although there is a programme of incentives to Alternative Sources of Electricity - Proinfa, it does not consider the SFCR's in its guidelines for qualification, only the wind systems, small hydroelectric plants and systems powered by biomass. Point is, therefore, the need for the creation of an energy policy that encourages the Brazilian market photovoltaic, more precisely a policy of offering incentives conditions of maturity of this technology when connected to the network - technical standards, decrease costs, creation of hand of specialized work, installation of manufacturers

  17. The last mile in the Brazilian Amazon – A potential pathway for universal electricity access

    International Nuclear Information System (INIS)

    The Brazilian rural electrification initiative Luz Para Todos – LPT (Light for All) has attracted attention internationally due to its ambitious targets and significant achievements in the last decade. The initiative has proved effective in its first phase, which has been developed through the extension of the grid. Yet, there are still important challenges to provide the service to inhabitants of remote areas in the Brazilian Amazon. We identify these challenges within institutional, technology, and funding structures operating within LPT. In line with these challenges, we propose a pathway to facilitate the achievement of universal electricity access in remote areas of the region. The proposed pathway is based on three key leverage points: (i) rules guiding the relationship among new agents and communities; (ii) the implementation of small-scale power generation technologies based on local resources; and (iii) optimized subsidies. It has the potential to allow (i) a better dimensioning of off-grid solutions considering local resources and realities, (ii) the creation of adapted institutions capable of implementing and operating the required systems and, (iii) an effective operation of off-grid solutions. -- Highlights: •There are important challenges to provide universal electricity access in the Amazon. •We propose a pathway to facilitate universal electricity access in remote areas of the Amazon. •The pathway allows a transition to a more knowledge-driven and participatory system

  18. 2015 Plan. Project 2: the electric power sector and the Brazilian economy: insertion and forecasts

    International Nuclear Information System (INIS)

    This project shows the economic and the energetic view of the Brazilian electric power sector, mentioning the actual conjuncture; the economy evolution; some sector forecasts; demographical aspects; international price of petroleum and National Energetic Matrix. (C.G.C.)

  19. The Brazilian education system. Students with disabilities

    Directory of Open Access Journals (Sweden)

    Roberto Dainese

    2010-07-01

    Full Text Available The Brazilian education system provides a specific form of organization for the inclusive education of students with disabilities. Law No. 9394 dated December 20, 1996, “Lei de diretrizes e bases da educação nacional”, presents in Chapter V the “educação especial" as a form of organization offered to students "portadores de Necessidades especiais”. Admission of students with disabilities in the Brazilian schools was characterized by several phases: the welfarist phase, the integration phase and the inclusion phase, which is the most recent one and now being debated. The presence of a special device fosters the differences, even when everybody enters the classbecause a separation perspective damps down all the procedural and design efforts towards a true integration, holding back collaboration and action sharing among teachers. We consider however effective an action that accompanies the gradual learning evolution mediating between the student with disabilities and peers, between him and the teachers, between him and the learning tools designed.

  20. Brazilian system for NPP personnel training

    International Nuclear Information System (INIS)

    part of the maintenance training center. Computers and audio-visual aids are available. There are two categories of nuclear power plant personnel which are regulated by CNEN: Licensed personnel (Senior Reactor Operators - SRO and Reactor Operators - RO) and Health Physics Supervisors. For these two categories, CNEN sets up rules and regulations which require approval of training programs and certificate them through independent written and oral examinations. All training activities related to these personnel are reviewed by CNEN. Licensed operators are required biannual retraining courses and their licenses are renewed every two years, after the applied programs are evaluated and approved by CNEN . Their requalification training programs, with utilization of full-scope simulators, however, are performed every year, at training centers located in the U.S. and Spain. ELETRONUCLEAR continuously exchanges information with international organizations such as IAEA, INPO, WANO and VGB, in areas of operational experience and guidelines related to training activities. raining Department provides an average of 24.000 mht (man-hour trained) per month, for the several departments of ELETRONUCLEAR and external organizations. It means 8% of total work force dedicated permanently to training programmes. Presently, there are some important issues influencing planning of training activities. During the last two years, production of electrical energy in Brazil could not follow its increasing consumption. Due to this problem, the Federal Government has decided to incentive an expansion of thermal energy production system, which is based mostly on large availability of natural gas in South America. This emerging market has recruited an expressive number of nuclear Personnel, Vienna (AT) salaries usually are higher in comparison with the nuclear market. Additionally, nuclear workers can retire after 25 years of work, following Brazilian legislation. These two aspects cause a expressive

  1. The future of the Brazilian electric system

    International Nuclear Information System (INIS)

    Economia e Energia presents a study where the conservative suppositions results in participation of the hydraulic energy roundly of 85 percent in the year 2030, reducing to 74 percent in 2035. The participation of the nuclear energy would be 5 percent and 9 percent, respectively, and the rest would be supplied by conventional thermal plants. In terms of installed power in 2035, there would be 270 GW of installed hydroelectric power, 90 GW of conventional thermal plants and 36 GW from nuclear plants, equivalent to circa 28 of 1.3 Gw power plants, from which 20 plants would be compromised with regulation and 8 corresponding to the necessities resulted from the exhaustion of the hydroelectric potential

  2. The Brazilian electric power market: historic and forecasting

    International Nuclear Information System (INIS)

    A historical analysis of electric power market evolution in Brazil and in their regions during 1950 to 1990, is described, showing the forecasting for the next ten years. Some considerations about population, energy conservation and industrial consumers are also presented, including statistical data of the electrical power market. (C.G.C.)

  3. Electrical system architecture

    Science.gov (United States)

    Algrain, Marcelo C.; Johnson, Kris W.; Akasam, Sivaprasad; Hoff, Brian D.

    2008-07-15

    An electrical system for a vehicle includes a first power source generating a first voltage level, the first power source being in electrical communication with a first bus. A second power source generates a second voltage level greater than the first voltage level, the second power source being in electrical communication with a second bus. A starter generator may be configured to provide power to at least one of the first bus and the second bus, and at least one additional power source may be configured to provide power to at least one of the first bus and the second bus. The electrical system also includes at least one power consumer in electrical communication with the first bus and at least one power consumer in electrical communication with the second bus.

  4. The restructuring of the Brazilian electric power sector and the universal access to the electric power service

    International Nuclear Information System (INIS)

    The central issue of debate was the need to align the energy sector's options and organization with changing global patterns of economic and social development, characterized by the increasing role played by the private sector, greater integration in the world economy, and new economic and social priorities such as efficiency, decentralization, deregulation, and a closer attention to environmental issues. The aim of the work was to overview the restructuring of the Brazilian electric power sector. Tariffs are also commented

  5. Hawaii electric system reliability.

    Energy Technology Data Exchange (ETDEWEB)

    Silva Monroy, Cesar Augusto; Loose, Verne William

    2012-09-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability %E2%80%9Cworth%E2%80%9D and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  6. Shipboard electrical power systems

    CERN Document Server

    Patel, Mukund R

    2011-01-01

    Shipboard Electrical Power Systems addresses new developments in this growing field. Focused on the trend toward electrification to power commercial shipping, naval, and passenger vessels, this book helps new or experienced engineers master cutting-edge methods for power system design, control, protection, and economic use of power. Provides Basic Transferable Skills for Managing Electrical Power on Ships or on LandThis groundbreaking book is the first volume of its kind to illustrate optimization of all aspects of shipboard electrical power systems. Applying author Mukund Patel's rare combina

  7. Electric distribution systems

    CERN Document Server

    Sallam, A A

    2010-01-01

    "Electricity distribution is the penultimate stage in the delivery of electricity to end users. The only book that deals with the key topics of interest to distribution system engineers, Electric Distribution Systems presents a comprehensive treatment of the subject with an emphasis on both the practical and academic points of view. Reviewing traditional and cutting-edge topics, the text is useful to practicing engineers working with utility companies and industry, undergraduate graduate and students, and faculty members who wish to increase their skills in distribution system automation and monitoring."--

  8. Critical evaluation of the present institutional model of the Brazilian electric sector; Avaliacao critica do atual modelo institucional do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Bajay, Sergio Valdir [Universidade Estadual de Campinas (FEM/UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Energia], E-mail: bajay@fem.unicamp.br

    2010-07-01

    This paper makes a critical evaluation of the effect of those changes on the Brazilian electric market and to cause to stand out the main points which requires future actions of the federal government and the Brazilian Parliament.

  9. CAPM (Capital Asset Pricing Model) and regulation in Brazilian electric distribution sector

    International Nuclear Information System (INIS)

    The aim of this paper is to analyse the use of Capital Asset Pricing Model (CAPM) Beta in the Brazilian electric distribution sector tariffs review. The betas applied by the Regulatory Agency are defined using data from the American, English and Brazilian markets. These betas will then be compared to the betas obtained in the domestic market. The betas were directly obtained from an economic-financial databank largely employed by the market. The sample is composed of companies' shares, priced at Sao Paulo Stock Market. Their main activity is the distribution of electric energy between July 2002 and July 2007. The results of mean betas obtained for the distribution segment, with values close to the ones applied by the regulatory agency for the cycle of tariff reviews between 2007-2010. (author)

  10. Electric turbocompound control system

    Energy Technology Data Exchange (ETDEWEB)

    Algrain, Marcelo C. (Dunlap, IL)

    2007-02-13

    Turbocompound systems can be used to affect engine operation using the energy in exhaust gas that is driving the available turbocharger. A first electrical device acts as a generator in response to turbocharger rotation. A second electrical device acts as a motor to put mechanical power into the engine, typically at the crankshaft. Apparatus, systems, steps, and methods are described to control the generator and motor operations to control the amount of power being recovered. This can control engine operation closer to desirable parameters for given engine-related operating conditions compared to actual. The electrical devices can also operate in "reverse," going between motor and generator functions. This permits the electrical device associated with the crankshaft to drive the electrical device associated with the turbocharger as a motor, overcoming deficient engine operating conditions such as associated with turbocharger lag.

  11. The auctions of the new brazilian electric power sector; Os leiloes do novo modelo do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Carneiro, Maria Carolina

    2007-07-01

    Inside the new Brazilian electric power the auctions constitutes the central mechanism which allows the sales of the most part of energy used in the country. Much has been discussed on the new arrangement of the sector and the evaluations and opinions on these auctions results are controversy. In fact, it is not a easy task to perform the evaluation of the new brazilian electric power sector.

  12. Electrical Energy Management System

    OpenAIRE

    Oriti, Giovanna

    2014-01-01

    Energy Academic Group Science and Technology Project Research Objectives: To apply power electronics technology to manage electrical energy intelligently in buildings, ships or expeditionary camps. Energy Management System (EMS) laboratory demos and theses.

  13. The Brazilian electric power industry restructuring: an evaluation of the competition through the contestable market theory

    International Nuclear Information System (INIS)

    The central issue of debate was the need to align the energy sector's options and organization with changing global patterns of economic and social development, characterized by the increasing role played by the private sector, greater integration in the world economy, and new economic and social priorities such as efficiency, decentralization, deregulation, and a closer attention to environmental issues. The aim of the work is to evaluate the competition in the Brazilian electric power industry through the Contestable Market Theory proposed by Baumol

  14. The 2014 Elections and the Brazilian Party System

    Directory of Open Access Journals (Sweden)

    Carlos Ranulfo Melo

    2015-04-01

    Full Text Available The Brazilian party system presents a paradox. Although the Workers Party (PT and the Brazilian Social Democratic Party (PSDB have controlled presidential elections for the last 20 years, their force at the other levels of electoral competition has not grown. The objective of this study is to undertake a discussion of this situation through the 2014 general elections. After attempting to explain why successive challengers have not been able to change the structure of competition for the Brazilian presidency, I will analyze the relation established between the pattern observed at this level and the other “connected” electoral disputes—both those for state executive and federal legislative office. The general conclusion is that even if the pattern continues, it is quite improbable that this will significantly impact the other levels of national political party competition.

  15. Return on capital of Brazilian electricity distributors: A comparative analysis

    International Nuclear Information System (INIS)

    This paper analyzes the electricity distribution segment in Brazil from 1998 to 2005-after the conclusion of privatization process-trying to assess whether the return on capital invested was in line with the risk required in the segment. It concludes that the return on equity in Brazil was systematically negative until 2003. Only in 2005 did the distribution segment really begin to recover, showing profitability consistent with the estimated cost of equity. Comparisons with Argentine, Chilean and American companies reveal that firms in the latter two countries, generally managed to reward shareholders according to the opportunity cost of capital. Estimates are that to sustain annual growth of roughly 3.7% for the next decade, the entire electricity sector will demand US$ 7 billion in capital expenditures a year for the next decade, 67% for generation, 16% for transmission and 17% for distribution. In order to stimulate private capital investment, it is fundamental for the regulator, in the tariff revision processes, to consistently assure a rate of return on capital in line with the segment's real opportunity cost and therefore maintain the health of all the three segments without the burden of subsidies

  16. Electrical energy systems

    CERN Document Server

    El-Hawary, Mohamed E

    2007-01-01

    Features discussions ranging from the technical aspects of generation, transmission, distribution, and utilization to power system components, theory, protection, and the energy control center that offer an introduction to effects of deregulating electric power systems, blackouts and their causes, and minimizing their effects.

  17. Solar electric systems

    Science.gov (United States)

    Warfield, G.

    Subjects discussed in connection with solar electricity are related to solar radiation fundamentals, wind electric conversion and utilization, the basic theory of solar cells, photovoltaic materials, photovoltaic technology, components of solar thermal electric systems, solar thermal power plants, and integrated solar thermal electric complexes. The solar technology development in the Arab world is also examined, taking into account the horizon of solar energy in the Arab countries, solar energy activities at the Scientific Research Council in Iraq, solar energy activities at the Royal Scientific Society in Jordan, the solar energy program at Kuwait Institute for Scientific Research, application of solar energy in Libya, prospects of solar energy for Egypt, solar energy programs in Qatar, performance characteristics of a 350 kW photovoltaic power system for Saudi Arabian villages, nonconventional energy in Syria, wind and solar energies in Sudan, solar electric research and development program in Tunisia, and solar energy research and utilization in Yemen Arab Republic. No individual items are abstracted in this volume

  18. Electric power systems

    CERN Document Server

    Weedy, B M; Jenkins, N; Ekanayake, J B; Strbac, G

    2012-01-01

    The definitive textbook for Power Systems students, providing a grounding in essential power system theory while also focusing on practical power engineering applications. Electric Power Systems has been an essential book in power systems engineering for over thirty years. Bringing the content firmly up-to-date whilst still retaining the flavour of Weedy's extremely popular original, this Fifth Edition has been revised by experts Nick Jenkins, Janaka Ekanayake and Goran Strbac. This wide-ranging text still covers all of the fundamental power systems subjects but is now e

  19. Resources transfer and centralization in Brazilian electrical sector: the reversion global reserve (RGR) and the guarantee global reserve (GGR)

    International Nuclear Information System (INIS)

    This dissertation makes the analysis of resources transfer and centralization in Brazilian electrical sector, through reversion global reserve (RGR) and guarantee global reserve (GGR). RGR and GGR are funds. RGR finances sectorial investments in electric power and GGR aims the supply of deficient concessionaires. Governmental investments and the results of this application are showing. (M.V.M.). 55 refs, 2 figs, 61 tabs

  20. Investments in the Brazilian electric sector; Os investimentos no setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Arthur Octavio Pinto Barreto de

    2008-05-15

    This work covers the investments in the Brazilian electric sector. Initially it describes the investments since 1879 in order to give a better understanding of the historical return obtained by investors, associated risks, investors' profile and investment's funding. Then some financial considerations related to new investments analysis are presented, emphasizing: the discounted cash flow theory, the equity return, the business risks and the characteristics of the main project accounts. Additionally, a hydroelectric case study is presented, in which the effect at the energy price of uncertainties in cost's projections, regional tax benefits, tax alternatives, and others are stressed. (author)

  1. Amazon surveillance system (SIVAM): U.S. and Brazilian cooperation

    OpenAIRE

    Wittkoff, E. Peter

    1999-01-01

    Approved for public release; distribution is unlimited The thesis will demonstrate bow Brazil's System for Surveillance of the Amazon (SIVAM) increases bilateral linkages in Brazilian-U.S. relations within the framework of the international relations theory of complex interdependence; The thesis's central theme is that SIVAM might benefit U.S. national security interests in Latin America, especially in counter-drug operations. For example, an opportunity for greater cooperation between the...

  2. Formulation of a projection model of electric power demand applied to isolated systems in natural development: the case of the brazilian electric company of Rondonia territory; Formulacao de um modelo de projecao de demanda de energia eletrica aplicado a sistemas isolados em desenvolvimento natural: o caso da CERON - Centrais Eletricas de Rondonia

    Energy Technology Data Exchange (ETDEWEB)

    Dourado, Rosana Aparecida

    2004-07-01

    The Electricity inserts it self more than other services in the economy and in the Brasilian society resulting an increase of market of electrical energy more than that of economy e consequently in the national energy bases. Given the importance of the definition of the demand of electrical energy inside the development process of a region, the objective of this dissertation is to propose a model of forecasting energy demand applied to a small scale utility. With basing on the foundation that the electrical energy demand varies accordingly with the region, social levels and economical conditions and also the activities developed, the method utilized was a definition of a set of representative variables in this context, using the relation between the population an the number of residential consumers; consumption per residential consumer and the consumption structure of the residential segment over the total demand. The results with the application of the model utilizing this philosophy of the technique of modeling scenes, permitted the definition of electrical energy demand for the market of the Brazilian electric company CERON S.A. like a case study. (author)

  3. [Healthcare value chain: a model for the Brazilian healthcare system].

    Science.gov (United States)

    Pedroso, Marcelo Caldeira; Malik, Ana Maria

    2012-10-01

    This article presents a model of the healthcare value chain which consists of a schematic representation of the Brazilian healthcare system. The proposed model is adapted for the Brazilian reality and has the scope and flexibility for use in academic activities and analysis of the healthcare sector in Brazil. It places emphasis on three components: the main activities of the value chain, grouped in vertical and horizontal links; the mission of each link and the main value chain flows. The proposed model consists of six vertical and three horizontal links, amounting to nine. These are: knowledge development; supply of products and technologies; healthcare services; financial intermediation; healthcare financing; healthcare consumption; regulation; distribution of healthcare products; and complementary and support services. Four flows can be used to analyze the value chain: knowledge and innovation; products and services; financial; and information. PMID:23099762

  4. Energy commercialization in the new environment of the Brazilian electric power sector. A methodology for production allocation strategies analysis

    International Nuclear Information System (INIS)

    The restructuring of the Brazilian Electric Sector has modified the rules for purchase and sale of energy, resulting in the creation of the Wholesale Energy Market. In this new context, the decision of the exposure level to the spot market price and the purchase of energy through bilateral contracts becomes so much a strategic variable for consumers or dealers, as for hydro and thermal generators. This work presents a methodology for planning of energy commercialization envisaging purchase and sale energy opportunities provided by the new Regulatory Framework of the Brazilian Electric Sector. (author)

  5. Renewable and non-renewable exergy cost and specific CO2 emission of electricity generation: The Brazilian case

    International Nuclear Information System (INIS)

    Highlights: • Renewable and non-renewable exergy costs of the Brazilian electricity are evaluated. • Specific CO2 emissions of Brazilian electricity mix are determined. • Representative profiles of the electricity generation routes are reviewed. • Exergoeconomy is used to distribute costs and emissions in multiproduct processes. - Abstract: The average unit exergy cost and CO2 emissions of the electricity generated in Brazil are evaluated using the national electricity mix and considering the representative profiles of the electricity generation routes. The Brazilian installed capacity is composed of hydropower plants, natural gas, fuel oil and coal fired thermoelectric plants, biomass cogeneration plants, nuclear plants and wind farms. By using exergoeconomy to distribute exergy costs and CO2 emissions in multiproduct processes and by weighting the CO2 emissions and the renewable and non-renewable exergy consumption of each type of plant, it is possible to obtain the average unit exergy costs and specific CO2 emission for the whole electricity generated. An iterative calculation procedure is used to take into account cyclic interactions of the processed fuels and electricity generated. The renewable and non-renewable exergy costs together with the CO2 emissions provide a reasonable way to compare the electricity and its final applications with other energy sources

  6. Socio-environmental policy of Brazilian electric sector: effects of the environmental legislation; Politica socio-ambiental do setor eletrico brasileiro: efeitos da legislacao ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Amaral, A.C.; Menezes, C.F.S. [Departamento Nacional de Producao Mineral (DNPM), Rio de Janeiro, RJ (Brazil). Projeto RADAMBRASIL

    1993-12-31

    This work discusses the socio-environmental policy of Brazilian electric sector. Implications of environmental legal aspects on the electric sector are also discussed. The main problems concerning the implementation of the socio-environment policy are presented 3 refs.

  7. Optimizing electrical distribution systems

    International Nuclear Information System (INIS)

    Electrical utility distribution systems are in the middle of an unprecedented technological revolution in planning, design, maintenance and operation. The prime movers of the revolution are the major economic shifts that affect decision making. The major economic influence on the revolution is the cost of losses (technical and nontechnical). The vehicle of the revolution is the computer, which enables decision makers to examine alternatives in greater depth and detail than their predecessors could. The more important elements of the technological revolution are: system planning, computers, load forecasting, analytical systems (primary systems, transformers and secondary systems), system losses and coming technology. The paper is directed towards the rather unique problems encountered by engineers of utilities in developing countries - problems that are being solved through high technology, such as the recent World Bank-financed engineering computer system for Sri Lanka. This system includes a DEC computer, digitizer, plotter and engineering software to model the distribution system via a digitizer, analyse the system and plot single-line diagrams. (author). 1 ref., 4 tabs., 6 figs

  8. The supply expansion of electricity in Brazilian urban centers through connected photovoltaic systems' network; A expansao da oferta de energia eletrica nos centros urbanos brasileiros por meio de sistemas fotovoltaicos conectados a rede

    Energy Technology Data Exchange (ETDEWEB)

    Benedito, Ricardo da Silva; Zilles, Roberto [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Eletrotecnica e Energia. Lab. de Sistemas Fotovoltaicos

    2010-07-01

    This paper aims to outline perspectives on the electricity production through Grid-Connected Photovoltaic Systems (GCPS), in Brazil, and its insertion on a large scale in the energy matrix, as a supplementary power generation source. The GCPS bring several benefits to the Electrical Sector and the environment by producing energy cleanly and quietly in the places of consumption, avoiding the construction of large power plants and avoiding additional costs with transmission and distribution. In general, these systems can be integrated into the buildings architecture, taking advantage of the rooftop of pre-existing buildings. But, although it has high solar potential, Brazil had been installed a capacity of only 161.32 kWp GCPS until December 2009, a value considered negligible compared, for instance, with 4.5 GWp installed in Europe alone in 2008. This study shows that the cost of generation from a GCPS is still high, reaching to 2.4 times higher than the average residential tariff practiced in Brazil, which turns the technology impracticable commercially. But it shows a trend of equalization between these two values in the next decade for various locations, which will certainly make the GCPS to be considered as an alternative for expanding the energy supply. But for the lack of appropriate technical criteria do not affect the spread of this technology in the future, it is necessary a correct regulation of this activity by the staff of the Electrical Sector. (author)

  9. Simulation of the low latitude ionosphere response to disturbed winds and electric fields: Brazilian region

    Science.gov (United States)

    Batista, Inez S.; Souza, Jonas; Bailey, Graham; Bravo, Manuel

    2016-07-01

    Modeling the ionosphere during disturbed periods is one of the most challenging tasks due to the complexity of the phenomena that affect the electric fields and the thermosphere environment as whole. It is well known that depending on the direction of the interplanetary magnetic field disturbance electric fields (undershielding or overshielding) can penetrate from high to low latitudes causing significant disturbances in the electron density distribution and in the equatorial ionization anomaly (EIA) development. Besides that, the large amount of energy deposited in the polar region during disturbed periods will be responsible for the generation of disturbed winds that will flow towards the equator where they produce a disturbance dynamo which also affects the EIA density distribution. The TIDs and TADs are also sources of disturbances that propagate at high velocity reaching the equator 2-3 hours after the beginning of the magnetic storm. In this work we use the Sheffield University Plasmasphere-Ionosphere Model at INPE (SUPIM-INPE), to simulate the drastic effects that were observed at the low latitude ionosphere in the Brazilian region during a very intense magnetic storm event. A few models are tested for the disturbed electric field and wind. The simulation results showed that the observations are better explained when considering a traveling waveform disturbance propagating from north to south at a velocity equal to 200 m/s.

  10. New model of Brazilian electric sector: implications of sugarcane bagasse on the distributed generation process

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Celso E.L. de; Rabi, Jose A. [Universidade de Sao Paulo (GREEN/FZEA/USP), Pirassununga, SP (Brazil). Fac. de Zootecnia e Engenharia de Alimentos. Grupo de Pesquisa em Reciclagem, Eficiencia Energetica e Simulacao Numerica], Emails: celsooli@usp.br, jrabi@usp.br; Halmeman, Maria Cristina [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas

    2008-07-01

    Distributed generation has become an alternative for the lack of resources to large energy projects and for recent facts that have changed the geopolitical panorama. The later have increased oil prices so that unconventional sources have become more and more feasible, which is an issue usually discussed in Europe and in USA. Brazil has followed such world trend by restructuring the electrical sector as well as major related institutions, from generation to commercialization and sector regulation while local legislation has enabled the increase of distributed generation. It regulates the role of the independent energy producer so as to provide direct business between the later and a great consumer, which is an essential step to enlarge energy market. Sugarcane bagasse has been used to produce both electric energy and steam and this paper analyzes and discusses the major implications of a new model for Brazilian electric sector based on sugarcane bagasse use as means to increase distributed generation process, particularly concerned with the commercialization of energy excess. (author)

  11. NMO-DBr: the Brazilian Neuromyelitis Optica Database System

    Directory of Open Access Journals (Sweden)

    Marco A. Lana-Peixoto

    2011-08-01

    Full Text Available OBJECTIVE: To present the Brazilian Neuromyelitis Optica Database System (NMO-DBr, a database system which collects, stores, retrieves, and analyzes information from patients with NMO and NMO-related disorders. METHOD: NMO-DBr uses Flux, a LIMS (Laboratory Information Management Systems for data management. We used information from medical records of patients with NMO spectrum disorders, and NMO variants, the latter defined by the presence of neurological symptoms associated with typical lesions on brain magnetic resonance imaging (MRI or aquaporin-4 antibody seropositivity. RESULTS: NMO-DBr contains data related to patient's identification, symptoms, associated conditions, index events, recurrences, family history, visual and spinal cord evaluation, disability, cerebrospinal fluid and blood tests, MRI, optic coherence tomography, diagnosis and treatment. It guarantees confidentiality, performs cross-checking and statistical analysis. CONCLUSION: NMO-DBr is a tool which guides professionals to take the history, record and analyze information making medical practice more consistent and improving research in the area.

  12. The new tariff model based on marginal costs developing concept for Brazilian electric sector. A case study for Power and Light Company of Sao Paulo State (Brazil)

    International Nuclear Information System (INIS)

    A new methodology for power generation cost accounts in Brazilian electric sector is described, with the application of marginal costs theory and its deviation in developing economies. A case report from a Brazilian Power and Light Company is studied, focalizing the seasoning, the planning, the tariff model and the power generation, transmission and distribution. (M.V.M.). 19 refs, 28 figs, 1 tab

  13. COMPETITIVE PRESSURE SYSTEMS MAPPING IN THE BRAZILIAN TRUCK MARKET

    Directory of Open Access Journals (Sweden)

    Ricardo Costa da Cruz

    2013-06-01

    Full Text Available The automotive business in Brazil achieved 10% of the industry revenue and 6% of the formal employment by 2008. The commercial vehicle segment concentrated so far eight truck makers that experienced their best market figures in 2008, the economy crisis in 2009, and an extraordinary recovery in 2010. Government tax reduction programs as well as special financing incentives were undoubtedly decisive to re-stimulate the business during the crisis. Positive Brazilian perspectives with the boom in the agricultural, oil and gas, mining and infrastructure activities plus the coming sports events call the attention of new players that are quickly implementing different business strategies to become part of the game. New emission regulations starting from 2012 also bring uncertainties, challenges and opportunities. With the growing globalization and market concentration it's critical for any industry understand and minimize the forces of competitive pressures. The main goal of this paper, therefore, is to contribute to the academy with an alternative approach of strategic and behavioral analysis of rivalry and competition different than the five forces model of Porter. Ford, Iveco, MAN, Mercedes-Benz, Scania and Volvo were assessed from 2008 to 2010 within three main performance indicators – unit sales, gross revenues and operating profits – supporting the elaboration of the competitive pressure systems mapping model of D'aveni, including a hypothetical future scenario with a new entrant and the potential impacts in the system. Main findings and results portray the asymmetrical strategic behavior of competitors and the temporary dynamic stability in the Brazilian truck industry.

  14. Insertion of the free consumers in the Brazilian electrical sector: challenges and opportunities; Insercao dos consumidores livres no setor eletrico brasileiro: desafios e oportunidades

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Cristiane Padilha

    2010-03-15

    This thesis analyses the role of free consumers in the Brazilian Electric Power Sector. Therefore, it evaluates the role of free consumers in other markets worldwide and analyses the current Brazilian regulatory framework that was introduced in 2004. The current model has replaced the one adopted in the 1990s, when the first reform of the Brazilian Electricity Sector occurred. To assess the role of free consumers in the electricity sector, this work analyses the benefits that this kind of consumers perceive and the risks they are exposed to when they switch from the captive market and go towards the open market. It also evaluates the influence of free consumers over the other industry agents: generators, distributors, retail consumers and society. It also identifies new options for free consumers in the Brazilian electric energy (author)

  15. Smart electric vehicle charging system

    OpenAIRE

    João C. Ferreira; Monteiro, Vítor Duarte Fernandes; João L Afonso; Silva, Alberto R.

    2011-01-01

    In this work is proposed the design of a system to create and handle Electric Vehicles (EV) charging procedures, based on intelligent process. Due to the electrical power distribution network limitation and absence of smart meter devices, Electric Vehicles charging should be performed in a balanced way, taking into account past experience, weather information based on data mining, and simulation approaches. In order to allow information exchange and to help user ...

  16. Control of power swings between brazilian southern and southeastern systems

    Energy Technology Data Exchange (ETDEWEB)

    Caldas, G.P.; Botelho, M.J.; Carvalho, J.F.M.; Gomes, J.R. [ELETROSUL, Curitiba, PR (Brazil)

    1987-12-31

    This report contains an explanation of the stability problems and the operational procedures used to control the power swings observed between the electric power systems of the South and Southeast of Brazil. The time period from August 1985 to May 1987 covered in this paper corresponds to the initial operation and expansion of Itaipu power plant and its associated transmission system. 7 refs., 2 figs.

  17. Electric vehicle data acquisition system

    DEFF Research Database (Denmark)

    Svendsen, Mathias; Winther-Jensen, Mads; Pedersen, Anders Bro;

    2014-01-01

    and industrial applications, e.g. research in electric vehicle driving patterns, vehicle substitutability analysis and fleet management. The platform is based on a embedded computer running Linux, and features a high level of modularity and flexibility. The system operates independently of the make of the car......, by using the On-board Diagnostic port to identify car model and adapt its software accordingly. By utilizing on-board Global Navigation Satellite System, General Packet Radio Service, accelerometer, gyroscope and magnetometer, the system not only provides valuable data for research in the field of electric......A data acquisition system for electric vehicles is presented. The system connects to the On-board Diagnostic port of newer vehicles, and utilizes the in-vehicle sensor network, as well as auxiliary sensors, to gather data. Data is transmitted continuously to a central database for academic...

  18. Assessment and kinetics of soil phosphatase in Brazilian Savanna systems.

    Science.gov (United States)

    Ferreira, Adão S; Espíndola, Suéllen P; Campos, Maria Rita C

    2016-05-31

    The activity and kinetics of soil phosphatases are important indicators to evaluate soil quality in specific sites such as the Cerrado (Brazilian Savanna). This study aimed to determine the activity and kinetic parameters of soil phosphatase in Cerrado systems. Soil phosphatase activity was assessed in samples of native Cerrado (NC), no-tillage (NT), conventional tillage (CT) and pasture with Brachiaria brizantha (PBb) and evaluated with acetate buffer (AB), tris-HCl buffer (TB), modified universal buffer (MUB) and low MUB. The Michaelis-Menten equation and Eadie-Hofstee model were applied to obtain the kinetic parameters of soil phosphatase using different concentrations of p-nitrophenol phosphate (p-NPP). MUB showed the lowest soil phosphatase activity in all soils whereas AB in NC and NT presented the highest. Low MUB decreased interferences in the assessment of soil phosphatase activity when compared to MUB, suggesting that organic acids interfere on the soil phosphatase activity. In NC and NT, soil phosphatase activity performed with TB was similar to AB and low MUB. Km values from the Michaels-Menten equation were higher in NC than in NT, which indicate a lower affinity of phosphatase activity for the substrate in NC. Vmax values were also higher in NC than in NT. The Eadie-Hofstee model suggests that NC had more phosphatase isoforms than NT. The study showed that buffer type is of fundamental importance when assessing soil phosphatase activity in Cerrado soils. PMID:27254453

  19. Pervasive transition of the Brazilian land-use system

    Science.gov (United States)

    Lapola, David M.; Martinelli, Luiz A.; Peres, Carlos A.; Ometto, Jean P. H. B.; Ferreira, Manuel E.; Nobre, Carlos A.; Aguiar, Ana Paula D.; Bustamante, Mercedes M. C.; Cardoso, Manoel F.; Costa, Marcos H.; Joly, Carlos A.; Leite, Christiane C.; Moutinho, Paulo; Sampaio, Gilvan; Strassburg, Bernardo B. N.; Vieira, Ima C. G.

    2014-01-01

    Agriculture, deforestation, greenhouse gas emissions and local/regional climate change have been closely intertwined in Brazil. Recent studies show that this relationship has been changing since the mid 2000s, with the burgeoning intensification and commoditization of Brazilian agriculture. On one hand, this accrues considerable environmental dividends including a pronounced reduction in deforestation (which is becoming decoupled from agricultural production), resulting in a decrease of ~40% in nationwide greenhouse gas emissions since 2005, and a potential cooling of the climate at the local scale. On the other hand, these changes in the land-use system further reinforce the long-established inequality in land ownership, contributing to rural-urban migration that ultimately fuels haphazard expansion of urban areas. We argue that strong enforcement of sector-oriented policies and solving long-standing land tenure problems, rather than simply waiting for market self-regulation, are key steps to buffer the detrimental effects of agricultural intensification at the forefront of a sustainable pathway for land use in Brazil.

  20. Planning and administration of human resources in Brazilian Electric Power Companies; Planejamento e administracao de recursos humanos nas empresas brasileiras do setor de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Devanir Vieira

    1985-12-01

    Administration and planning of human resources in Brazilian Companies of Electric Power Sector analyzes the evolution of the concept of business planning. This work explore the specific literature of this theme, giving emphasis in predict methods and human resources development and planning models. Is also presented a case study, realized in 1979, which comprehended 84 % of Brazilian Energy Companies. This study aims to evaluate the results of an implementation of this planning and development models 64 refs., 12 figs., 22 tabs.

  1. MEASURES OF EFFICIENCY AND INVESTMENTS RETURN: AN STUDY OF BRAZILIAN ELECTRICITY DISTRIBUTORS WITH DATA ENVELOPMENT ANALYSIS, MALMQUIST INDEX AND ROI

    Directory of Open Access Journals (Sweden)

    Valter Saurin

    2013-03-01

    Full Text Available This paper aims to determine, in a group of companies from the Brazilian electric sector, if there is a relationship between the return on investment (ROI and the concept of efficiency estimated by the method Data Envelopment Analysis (DEA, as well as evaluating the growth of productivity based on Malmquist Index (Fare et al, 1996. The hypothesis is that firms that had return on investment higher during certain period of time are those employed their resources efficiently in getting their outputs (DEA efficient. The input (1 Products (5 DEA model correspond to the operating cost (I, the network length (km, the number of consumers and the market billed high, medium and low voltage, respectively. The sample consisted of 31 companies of Brazilian electricity distribution and timing of the study was from 2007 to 2009. We calculated the Malmquist index (M0, represented by the change in total factor productivity (TFPC, which is composed by the evolution of technical efficiency (EC and the change in the technological frontier (TC of the companies were also determined ROI for each period. We calculated the correlation between the TFPC, TC, EC, score the DEA and the ROI for the period 2007 to 2009. The results showed a positive correlation, although weak, between efficiency change and the indexes mentioned above, rejecting the initial hypothesis

  2. Evaluation of capital investment in thermoelectric generation projects in the Brazilian electric sector using the real options theory; Avaliacao de investimento de capital em projetos de geracao termoeletrica no setor eletrico brasileiro usando teoria das opcoes reais

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Alessandro de Lima

    2000-04-01

    In the Brazilian Electric System about 92% of the generated electricity is of hydraulic origin. Today the system is operating practically in the limit of your capacity. Solutions of short time to make possible the expansion of the offer of electricity generation go by the installation of cycle combining thermal using natural gas as fuel. In this dissertation, it was used the real options theory to evaluate generation assets in the Brazilian electricity sector. In Brazil, central operator dispatches a flexible thermal when the electricity spot price is larger than the operation costs. The operation decision is like an European call, where underlying asset is the electricity and the strike price is the operation cost. The value of the capacity is the sum of all decisions to operate the thermal unit, in the remaining life of unit. It was used Monte Carlo Simulation and Dynamic Programming to evaluate this model. The problem is divided in two parts. In the first part, the base case is fixed and evaluated and the expected NPV and project risk are calculated in function of contract level. In the second part, many sensibilities are done in relation to base case. At the end, the value of flexibility is calculated for each contract level. (author)

  3. COMPETITIVE PRESSURE SYSTEMS MAPPING IN THE BRAZILIAN TRUCK MARKET

    OpenAIRE

    Ricardo Costa da Cruz; Francisco C. T. Starke-Rodrigues

    2013-01-01

    The automotive business in Brazil achieved 10% of the industry revenue and 6% of the formal employment by 2008. The commercial vehicle segment concentrated so far eight truck makers that experienced their best market figures in 2008, the economy crisis in 2009, and an extraordinary recovery in 2010. Government tax reduction programs as well as special financing incentives were undoubtedly decisive to re-stimulate the business during the crisis. Positive Brazilian perspectives with the boom in...

  4. Reliability impact of solar electric generation upon electric utility systems

    Science.gov (United States)

    Day, J. T.; Hobbs, W. J.

    1982-08-01

    The introduction of solar electric systems into an electric utility grid brings new considerations in the assessment of the utility's power supply reliability. This paper summarizes a methodology for estimating the reliability impact of solar electric technologies upon electric utilities for value assessment and planning purposes. Utility expansion and operating impacts are considered. Sample results from photovoltaic analysis show that solar electric plants can increase the reliable load-carrying capability of a utility system. However, the load-carrying capability of the incremental power tends to decrease, particularly at significant capacity penetration levels. Other factors influencing reliability impact are identified.

  5. Commercial statistical bulletin of the Brazilian electric utility Centrais Eletricas de Santa Catarina S.A; Boletim estatistico comercial da CELESC: Centrais Eletricas de Santa Catarina S.A

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    Statistical data concerning the Brazilian Centrais Eletricas de Santa Catarina S.A. utility relative to April 1996 are presented. They include, among other things, electricity consumption, number and class of consumers and electricity rates 6 figs., 50 tabs.

  6. Light and shadow in the Brazilian graduate studies system in health

    Directory of Open Access Journals (Sweden)

    Reinaldo Guimarães

    2014-08-01

    Full Text Available The author discusses the challenges faced by the Brazilian graduate studies system with an emphasis on the human health sector. He identifies imbalances in the supply side of knowledge, a prime territory for graduate programs, while highlighting that a proper conceptualization of such imbalances is incomplete if it fails to incorporate the demands for scientific and technological knowledge coming from healthcare services, industry, and society. He draws on concepts from technology economics involved in the innovation systems approach. The article highlights the historical and current role of Brazilian Graduate Studies Coordinating Board (Capes, particularly its evaluation system, as an essential device for overcoming the existing challenges in Brazilian graduate studies. The author concludes by suggesting some conceptual adjustments in the agency’s work.

  7. Solar Thermal Electricity Generating System

    Science.gov (United States)

    Mishra, Sambeet; Tripathy, Pratyasha

    2012-08-01

    A Solar Thermal Electricity generating system also known as Solar Thermal Power plant is an emerging renewable energy technology, where we generate the thermal energy by concentrating and converting the direct solar radiationat medium/high temperature (300∫C ñ 800∫C). The resulting thermal energy is then used in a thermodynamic cycleto produce electricity, by running a heat engine, which turns a generator to make electricity. Solar thermal power is currently paving the way for the most cost-effective solar technology on a large scale and is heading to establish a cleaner, pollution free and secured future. Photovoltaic (PV) and solar thermal technologies are two main ways of generating energy from the sun, which is considered the inexhaustible source of energy. PV converts sunlight directly into electricity whereas in Solar thermal technology, heat from the sun's rays is concentrated to heat a fluid, whose steam powers a generator that produces electricity. It is similar to the way fossil fuel-burning power plants work except that the steam is produced by the collected heat rather than from the combustion of fossil fuels. In order to generate electricity, five major varieties of solar thermal technologies used are:* Parabolic Trough Solar Electric Generating System (SEGS).* Central Receiver Power Plant.* Solar Chimney Power Plant.* Dish Sterling System.* Solar Pond Power Plant.Most parts of India,Asia experiences a clear sunny weather for about 250 to 300 days a year, because of its location in the equatorial sun belt of the earth, receiving fairly large amount of radiation as compared to many parts of the world especially Japan, Europe and the US where development and deployment of solar technologies is maximum.Whether accompanied with this benefit or not, usually we have to concentrate the solar radiation in order to compensate for the attenuation of solar radiation in its way to earthís surface, which results in from 63,2 GW/m2 at the Sun to 1 kW/m2 at

  8. Teaching at primary healthcare services within the Brazilian national health system (SUS in Brazilian healthcare professionals' training

    Directory of Open Access Journals (Sweden)

    Ramona Fernanda Ceriotti Toassi

    2013-06-01

    Full Text Available The aim of this study was to analyze the role of teaching at primary healthcare services within the Brazilian National Health System (SUS in dentists' training, at a public university in the south of Brazil. A qualitative methodological approach (case study was used. Interviews were conducted with 12 dentistry students, six dentists who were preceptors working in public primary healthcare services and three teachers connected with this curricular training. Our findings showed that the curricular training in SUS primary healthcare services had an impact on the dentists' education through establishment of bonds, autonomy in problem-solving and multiprofessional teamwork. It was seen that they learned about how healthcare services function, about healthcare and about development of cultural competence. There is a need to maintain constant questioning regarding these practices, and to ensure the presence of infrastructure and qualified professionals for teaching at these services.

  9. The locomotor system as seen in Brazilian scientific journals: a mini review

    Directory of Open Access Journals (Sweden)

    Mauricio Rocha e Silva

    2010-01-01

    Full Text Available OBJECTIVE: To make recent selected publications on the locomotor system available to the readership of Clinics. METHOD: A general survey of articles published in selected Brazilian journals was inspected and 91 articles were critically analyzed. They were categorized and briefly described. A final summary of themes is reproduced here. RESULTS: Papers fall into two main categories: articular and muscular pathology and therapeutics; medical sports. A number of papers are not classifiable under these headings. CONCLUSION: The locomotor system has been extensively analyzed and discussed in the Brazilian scientific press in recent years. Not surprisingly, knee and ankle pathology, soccer and running are dominant themes.

  10. Influence of financial crisis in new investments international Brazilian electric sector

    Energy Technology Data Exchange (ETDEWEB)

    Vela, Jorge Alcala; Cantuaria, Andre Luis

    2010-09-15

    Electricity sector in addition to being a public utility, requires a substantial investment, explore natural resources and the basis of all production chains and consumption of our society. In conclusion, the econometric model used to study the investment to 2010 by Eletrobras meets a correlation acceptable. So a well dependence exists between power and investment in the projects selected. The lack of sophistication and low level of development in credit derivatives financial systems in Brazil, both as a healthy situation of the accounts and balance sheets, due to bitter experience in past crises are allowing a better resistance now.

  11. Rh, Kell, Duffy, Kidd and Diego blood group system polymorphism in Brazilian Japanese descendants.

    Science.gov (United States)

    Flôres, Marli Aparecida Luvisuto Rossett; Visentainer, Jeane Eliete Laguila; Guelsin, Gláucia Andréia Soares; Fracasso, Adriana de Souza; de Melo, Fabiano Cavalcante; Hashimoto, Margareth Naomi; Sell, Ana Maria

    2014-02-01

    Polymorphisms of Rh, Kell, Duffy, Kidd and Diego blood group systems were studied in 209 unrelated Brazilian Japanese descendants from South of Brazil. The methods used were multiplex-PCR, AS-PCR and RFLP-PCR. The differences in frequencies among the populations were evaluated using chi-square test. The frequencies for Rh, Kell, Kidd and Diego system were similar to those of the Japanese. RHCE(*)CC, RHCE(*)EE genotypes and FY(*)01 allele were lower and FY(*)01N.01 was higher than Japanese. These differences in the frequencies between Brazilian Japanese descendants and Japanese could indicate a gene flow in Brazilian population and reinforce the importance of this knowledge to achieve safe red blood cells. PMID:24231689

  12. Research for Electric Energy Systems

    International Nuclear Information System (INIS)

    This report documents the technical progress in investigations. The first investigation is concerned with the measurement of magnetic fields in support of epidemiogical and in vitro studies of biological field effects. NIST cohosted a workshop on exposure and biological parameters that should be considered during the vitro studies with extremely low frequency (ELF) magnetic and electric fields. Also, equations were developed to predict the magnetic field in a parallel plate magnetic field exposure system. The second investigation is concerned with two different activities: the detection of trace levels of S2F10 in SF6 and the development of an improved stochastic analyzer for pulsating phenomena (SAPP). The detection of S2F10 in the presence of SF6 using mass-spectrometric detection coupled to a gas chromatograph is difficult because of the similar mass spectra. A technique is described that enables the detection of S2F10 in gaseous SF6 down to the ppb level using a modified gas chromatograph-mass spectrometer. The new system was applied to an investigation of the stochastic behavior of negative corona (Trichel pulses) and the effect of a dielectric barrier on these discharges. The third investigation is concerned with breakdown and prebreakdown phenomena in liquid dielectrics. The activity reported here was a study of negative steamers preceding electric breakdown in hexanes. Using the image preserving optical delay, the growth of the streamers associated with partial discharges at a point cathode are photographed at high magnification. The last investigation is concerned with the evaluation and improvement of methods for measuring fast transients in electrical power systems such as might be associated with an electromagnetic impulse. A compact resistive divider, NIST4, was designed. It is anticipated that this divider together with some Kerr electro-optical devices will be used as the reference system at NIST

  13. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  14. Electric system restructuring and system reliability

    Science.gov (United States)

    Horiuchi, Catherine Miller

    In 1996 the California legislature passed AB 1890, explicitly defining economic benefits and detailing specific mechanisms for initiating a partial restructuring the state's electric system. Critics have since sought re-regulation and proponents have asked for patience as the new institutions and markets take shape. Other states' electric system restructuring activities have been tempered by real and perceived problems in the California model. This study examines the reduced regulatory controls and new constraints introduced in California's limited restructuring model using utility and regulatory agency records from the 1990's to investigate effects of new institutions and practices on system reliability for the state's five largest public and private utilities. Logit and negative binomial regressions indicate negative impact from the California model of restructuring on system reliability as measured by customer interruptions. Time series analysis of outage data could not predict the wholesale power market collapse and the subsequent rolling blackouts in early 2001; inclusion of near-outage reliability disturbances---load shedding and energy emergencies---provided a measure of forewarning. Analysis of system disruptions, generation capacity and demand, and the role of purchased power challenge conventional wisdom on the causality of Californian's power problems. The quantitative analysis was supplemented by a targeted survey of electric system restructuring participants. Findings suggest each utility and the organization controlling the state's electric grid provided protection from power outages comparable to pre-restructuring operations through 2000; however, this reliability has come at an inflated cost, resulting in reduced system purchases and decreased marginal protection. The historic margin of operating safety has fully eroded, increasing mandatory load shedding and emergency declarations for voluntary and mandatory conservation. Proposed remedies focused

  15. Biodiversity and key ecosystem services in agroforestry coffee systems in the Brazilian Atlantic Rainforest Biome

    NARCIS (Netherlands)

    Souza, de H.N.

    2012-01-01

    The thesis reports the results of long-term experimentation (since 1993) of family farmers with agroforestry (AF) coffee systems in the Brazilian Atlantic Rainforest region, a highly fragmented and threatened biodiversity hotspot. The farmers used native trees from forest fragments during a transiti

  16. Innovation Networks: the Contribution of Partnerships to Innovative Performance of Firms in the Brazilian Electrical-Electronics Industry

    Directory of Open Access Journals (Sweden)

    Silvye Ane Massaini

    2015-01-01

    Full Text Available Innovation networks have been identified in the literature as a way to complement firms’ innovative capabilities through collaboration with other partners. To provide empirical evidence for this assertion, this paper investigates the contribution of partners established in innovation networks for innovative performance of firms in the Brazilian electricalelectronics industry. For this purpose, we carried out an exploratory and descriptive survey among 185 companies. The data were analyzed using structural equation modeling (SEM. As the main findings, we observed that the establishment of collaborative relationships with customers, competitors and universities/research institutions can contribute to organizational and process innovation. However, despite obtaining some significant results concerning the contribution of different partners in the network, electrical-electronics industry companies also attach great importance to internal activities to develop their innovations.

  17. The evolution and main determinants of productivity in Brazilian electricity distribution 1998-2005. An empirical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ramos-Real, Francisco Javier [Fac. CC. Economicas y Empresariales e IUDR - Universidad de La Laguna (ULL), Programa de investigacion Energia y Cambio Climatico Fedea-Abengoa (Spain); Tovar, Beatriz [Dpto. de Analisis Economico Aplicado y EIT - Universidad las Palmas de Gran Canaria (Spain); Iootty, Mariana [UFRRJ Universidade Federal Rural do Rio de Janeiro, Rio de Janeiro (Brazil); De Almeida, Edmar Fagundes; Pinto, Helder Queiroz Jr. [IE-UFRJ Instituto de Economia - Universidade Federal do Rio de Janeiro, Rio de Janeiro (Brazil)

    2009-03-15

    This paper estimates changes in the productivity of the Brazilian electricity distribution sector using Data Envelopment Analysis (DEA) on a panel of 18 firms from 1998 to 2005. The study decomposes the productivity change of these distribution firms in terms of technical efficiency, scale-efficiency and technical progress. This exercise aims to help the understanding of the main determinants of the evolution of productivity, focusing its relationship with the restructuring process implemented in the 1990s. TFP index records a yearly positive growth rate of 1.3% in the whole period under analysis for all firms. Technical change was the main component behind this evolution, with an average growth of 2.1% per year, while technical efficiency presented a yearly negative performance of - 0.8%. The results prove that, in general terms, the incentives generated in the reform process do not seem to have led the firms to behave in a more efficient manner. (author)

  18. Solar energy thermally powered electrical generating system

    Science.gov (United States)

    Owens, William R. (Inventor)

    1989-01-01

    A thermally powered electrical generating system for use in a space vehicle is disclosed. The rate of storage in a thermal energy storage medium is controlled by varying the rate of generation and dissipation of electrical energy in a thermally powered electrical generating system which is powered from heat stored in the thermal energy storage medium without exceeding a maximum quantity of heat. A control system (10) varies the rate at which electrical energy is generated by the electrical generating system and the rate at which electrical energy is consumed by a variable parasitic electrical load to cause storage of an amount of thermal energy in the thermal energy storage system at the end of a period of insolation which is sufficient to satisfy the scheduled demand for electrical power to be generated during the next period of eclipse. The control system is based upon Kalman filter theory.

  19. Brazilian two-component TLD albedo neutron individual monitoring system

    International Nuclear Information System (INIS)

    Since 1983, Instituto de Radioprotecao e Dosimetria, Brazil, uses a TLD one-component albedo neutron monitor, which has a single different calibration factor specifically for each installation type. In order to improve its energy response, a two-component albedo monitor was developed, which measure the thermal neutron component besides the albedo one. The two-component monitor has been calibrated in reference neutron fields: thermal, five accelerator-produced monoenergetic beams (70, 144, 565, 1200 and 5000 keV) and five radionuclide sources (252Cf, 252Cf(D2O), 241Am-Be, 241Am-B and 238Pu-Be) at several distances. Since January 2008, mainly Brazilian workers who handle neutron sources at different distances and moderation, such as in well logging and calibration facilities are using it routinely.

  20. Storm time equatorial plasma bubble zonal drift reversal due to disturbance Hall electric field over the Brazilian region

    Science.gov (United States)

    Santos, A. M.; Abdu, M. A.; Souza, J. R.; Sobral, J. H. A.; Batista, I. S.; Denardini, C. M.

    2016-06-01

    The dynamics of equatorial ionospheric plasma bubbles over Brazilian sector during two magnetic storm events are investigated in this work. The observations were made at varying phases of magnetic disturbances when the bubble zonal drift velocity was found to reverse westward from its normally eastward velocity. Calculation of the zonal drift based on a realistic low-latitude ionosphere modeled by the Sheffield University Plasmasphere-Ionosphere Model showed on a quantitative basis a clear competition between vertical Hall electric field and disturbance zonal winds on the variations observed in the zonal velocity of the plasma bubble. The Hall electric field arising from enhanced ratio of field line-integrated conductivities, ΣH/ΣP, is most often generated by an increase in the integrated Hall conductivity, arising from enhanced energetic particle precipitation in the South American Magnetic Anomaly region for which evidence is provided from observation of anomalous sporadic E layers over Cachoeira Paulista and Fortaleza. Such sporadic E layers are also by themselves evidence for the development of the Hall electric field that modifies the zonal drift.

  1. The convergence of the natural gas industry and electric power industry: the Brazilian case; Convergencia entre a industria do gas natural e a industria de energia eletrica: o caso brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Jose Ricardo Uchoa Cavalcanti [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Programa de Planejamento Energetico

    2008-07-01

    The main purpose of this paper is to analyze the convergence between power (electric sector) and natural gas industries in Brazil. It also shows how this convergence happens in the USA market and its applicability in the Brazilian market. At the end some conclusions and suggestions are presented to satisfy the Brazilian market, which behaves in a different way as the USA market, i.e. the Brazilian market does not follow seasonal pattern but an aleatory pattern in thermoelectric plants. (author)

  2. 49 CFR 238.425 - Electrical system.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Electrical system. 238.425 Section 238.425... Equipment § 238.425 Electrical system. (a) Circuit protection. (1) The main propulsion power line shall be... the operating environment. (2) The electronic equipment shall not produce electrical noise...

  3. 33 CFR 127.1107 - Electrical systems.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Electrical systems. 127.1107... Waterfront Facilities Handling Liquefied Hazardous Gas Design and Construction § 127.1107 Electrical systems. Electrical equipment and wiring must be of the kind specified by, and must be installed in accordance...

  4. 49 CFR 238.225 - Electrical system.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Electrical system. 238.225 Section 238.225... Equipment § 238.225 Electrical system. All passenger equipment shall comply with the following: (a... produce electrical noise that affects the safe performance of train line control and communications...

  5. Applications of artificial intelligence and expert systems in ANGRA-I emergency preparedness - The Brazilian case

    International Nuclear Information System (INIS)

    This study describes a system to follow a nuclear accident and points the areas where the presence of artificial intelligence could be necessary: diagnostics systems, emergency classification, accident management strategies and protective actions. Logical rules could be combined with deterministic equations to provide an expert system prototype to manage a nuclear emergency preparedness for nuclear reactors (fast or thermal) in the Brazilian Nuclear Energy National Commission. (CNEN). (author)

  6. Probabilistic Fault Diagnosis in Electrical Power Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — Electrical power systems play a critical role in spacecraft and aircraft. This paper discusses our development of a diagnostic capability for an electrical power...

  7. Hybrid electric vehicle power management system

    Science.gov (United States)

    Bissontz, Jay E.

    2015-08-25

    Level voltage levels/states of charge are maintained among a plurality of high voltage DC electrical storage devices/traction battery packs that are arrayed in series to support operation of a hybrid electric vehicle drive train. Each high voltage DC electrical storage device supports a high voltage power bus, to which at least one controllable load is connected, and at least a first lower voltage level electrical distribution system. The rate of power transfer from the high voltage DC electrical storage devices to the at least first lower voltage electrical distribution system is controlled by DC-DC converters.

  8. Analysis of constraints to the introduction of LNG plants in the Brazilian electric sector; Analise dos condicionantes para a introducao de plantas a GNL no setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Cortes, Tatiane Moraes Pestana

    2010-03-15

    This work aims analyze the constraints to the introduction of LNG in the Brazilian energy matrix. Therefore, considers the current regulatory framework and the investments recently made by PETROBRAS to acquire LNG in the international market in order to supply power plants in the country. In order to assess the current status of the LNG plants in the electricity sector, factors are analyzed in terms of the natural gas industry and electric power industry, such as: storage, LNG contracts, operating dispatch, LNG plants pricing and operational flexibility. Despite the increase in LNG international trade and the prospect of using this product in Brazil, there are some challenges for the effective use of LNG plants by Brazilian electric sector. Some of the challenges are the need to review the methodology of calculating the cost benefit of LNG power plants. Another important challenge is to examine the use of underground storage and its influence in the operating dispatch of LNG plants. (author)

  9. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  10. Electric vehicle system for charging and supplying electrical power

    Science.gov (United States)

    Su, Gui Jia

    2010-06-08

    A power system that provides power between an energy storage device, an external charging-source/load, an onboard electrical power generator, and a vehicle drive shaft. The power system has at least one energy storage device electrically connected across a dc bus, at least one filter capacitor leg having at least one filter capacitor electrically connected across the dc bus, at least one power inverter/converter electrically connected across the dc bus, and at least one multiphase motor/generator having stator windings electrically connected at one end to form a neutral point and electrically connected on the other end to one of the power inverter/converters. A charging-sourcing selection socket is electrically connected to the neutral points and the external charging-source/load. At least one electronics controller is electrically connected to the charging-sourcing selection socket and at least one power inverter/converter. The switch legs in each of the inverter/converters selected by the charging-source/load socket collectively function as a single switch leg. The motor/generators function as an inductor.

  11. The electrical system of nuclear power plant

    International Nuclear Information System (INIS)

    In these system, electrical power system is supplied from two-offsite transmission system respective main transformer and house service transformer; and reserve transformer. The electrical load in these system consist of safety electrical system and non-safety electrical system, The safety electrical and non safety electrical systems consist of four 6,9 kV AC medium voltage bus and 480 V AC low voltage bus system. The DC power system consist of four safety 125 V DC power system and the two non-safety 125 DC power systems. The equipment in these electrical system is main turbine-generator; GTG safety; GTG alternate; uninterrupted power supply (UPS) and battery system. To protect electrical equipment and building to direct stroke and non direct stroke disturbances is installed netral grounding system and lightning protection and protection the personnel to touch-voltage is installed equipment grounding system and station grounding. The lightning arrester system is connected to station station grounding system. (author)

  12. Electric mobility and charging: systems of systems and infrastructure systems

    OpenAIRE

    Bonnema, G. Maarten; Muller, Gerrit; Schuddeboom, Lisette

    2015-01-01

    In light of European and worldwide environmental programs, reduction of CO2 emissions and improvements in air quality receive a lot of attention. A prominent way to improve on both aspects is the replacement of Internal Combustion Engine Vehicles with Electrical Vehicles. Yet, simply replacing vehicles will not result in proper electric mobility because using Electrical Vehicles depends on many systems and infrastructures including the chargers, parking sites and payment structures. In this p...

  13. Using of electric power auctions in the Brazilian energy sector; A utilizacao de leiloes de energia eletrica no setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Luis Henrique Bassi [Agencia Nacional de Energia Eletrica (ANEEL), Brasilia, DF (Brazil)]. E-mail: lhbassi@aneel.gov.br; Camargo, Ivan Marques de Toledo [Universidade de Brasilia (UnB), DF (Brazil)]. E-mail: ivancamargo@unb.br

    2006-07-01

    The Brazilian power industry has undergone fundamental institutional changes in order to introduce competition in generation segment by allowing more flexibility to the electricity trading arrangements since mid 90. These reforms were aimed at increasing economic efficiency and both cost and energy price reduction. The restructuring process requested a highly complex legal framework in order to: ensure the necessary investments for the expansion of power infrastructure; stimulate the participation of private capital; and guarantee power supply adequacy at desired safety and reliability levels. The electricity rationing, occurred in 2001, was a result of: lack of investments, growing demand and supply vulnerability to adverse hydrological shocks. As a consequence, the Brazilian Government initiated a wide debate concerning the loopholes in the implanted model as well as the improvements needed to be adopted. The refinement of the electricity trading arrangements is an important aspect of the electric sector model revitalization. It resulted in the implantation of energy auctions aiming at increasing transactions transparency as well as establishing a long run energy price market reference and promoting market efficiency and competition. This paper analyses the implementation of energy auctions as a mechanism for trading power purchase agreements in the long term. It also discusses the Brazilian power industry restructuring process, in the face of the distribution utilities' obligation to purchase power for their captive customers. (author)

  14. Electric cars as mobile power storage systems

    International Nuclear Information System (INIS)

    This article discusses the use of electric cars as a means of optimising the use of renewable energy sources. Charging the cars' batteries during periods when cheap electricity prices prevail and then using excess capacity to supply the mains with electricity during periods of peak demand is discussed. The possible use of wind for power generation is discussed and a system proposed by a leading supplier of electrical apparatus and systems is examined. Two examples of electric cars and associated power chains are looked at and tests in everyday practice are described

  15. Hybrid and Electric Advanced Vehicle Systems Simulation

    Science.gov (United States)

    Beach, R. F.; Hammond, R. A.; Mcgehee, R. K.

    1985-01-01

    Predefined components connected to represent wide variety of propulsion systems. Hybrid and Electric Advanced Vehicle System (HEAVY) computer program is flexible tool for evaluating performance and cost of electric and hybrid vehicle propulsion systems. Allows designer to quickly, conveniently, and economically predict performance of proposed drive train.

  16. CAPM (Capital Asset Pricing Model) and regulation in Brazilian electric distribution sector; CAPM (Capital Asset Pricing Model) e regulacao no segmento de distribuicao do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Rinaldo Caldeira; Parente, Virginia, E-mail: rinaldo@iee.usp.br, E-mail: vparente@iee.usp.br [Universidade de Sao Paulo (USP), SP (Brazil)

    2010-07-01

    The aim of this paper is to analyse the use of Capital Asset Pricing Model (CAPM) Beta in the Brazilian electric distribution sector tariffs review. The betas applied by the Regulatory Agency are defined using data from the American, English and Brazilian markets. These betas will then be compared to the betas obtained in the domestic market. The betas were directly obtained from an economic-financial databank largely employed by the market. The sample is composed of companies' shares, priced at Sao Paulo Stock Market. Their main activity is the distribution of electric energy between July 2002 and July 2007. The results of mean betas obtained for the distribution segment, with values close to the ones applied by the regulatory agency for the cycle of tariff reviews between 2007-2010. (author)

  17. CAPM (Capital Asset Pricing Model) and regulation in Brazilian electric distribution sector; CAPM (Capital Asset Pricing Model) e regulacao no segmento de distribuicao do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Rinaldo Caldeira; Parente, Virginia [Universidade de Sao Paulo (USP), SP (Brazil)], emails: rinaldo@iee.usp.br, vparente@iee.usp.br

    2010-07-01

    The aim of this paper is to analyse the use of Capital Asset Pricing Model (CAPM) Beta in the Brazilian electric distribution sector tariffs review. The betas applied by the Regulatory Agency are defined using data from the American, English and Brazilian markets. These betas will then be compared to the betas obtained in the domestic market. The betas were directly obtained from an economic-financial databank largely employed by the market. The sample is composed of companies' shares, priced at Sao Paulo Stock Market. Their main activity is the distribution of electric energy between July 2002 and July 2007. The results of mean betas obtained for the distribution segment, with values close to the ones applied by the regulatory agency for the cycle of tariff reviews between 2007-2010. (author)

  18. The structural changes in the brazilian electric sector and the utilities strategic management; A restruturacao do setor eletrico brasileiro e o gerenciamento estrategico das empresas

    Energy Technology Data Exchange (ETDEWEB)

    Lotero, Roberto C.; Santana, Edvaldo Alves de [Santa Catarina Univ., Florianopolis, SC (Brazil). Programa de Pos-graduacao em Engenharia de Producao e Sistemas

    1998-12-31

    The objective of this paper is to show structural and market changes in brazilian electric sector and their implications on new business environment. Factors that will affect power utilities are pointed out and how they should be thoughtful in new model. Is pointed out the strategic change as a mean for utility optimization in efficiency and comparative advantage search. (author) 11 refs.; e-mail: rcl at eps.ufsc.br

  19. Life Cycle Assessment of Electricity Systems

    DEFF Research Database (Denmark)

    Turconi, Roberto

    Electricity systems represent a major source of global pollutants. Whilst currently relying heavily on fossil fuels, electricity systems are progressively shifting towards renewable sources to mitigate climate change and enhance energy security. The goal of this PhD project was to develop...... developed using Unit Commitment and Economic Dispatch, including wind and demand forecasts. This approach allows for assessing the influence of the fluctuating nature of wind on other electricity sources – this was not found in the LCA literature on renewable-based electricity systems, as it is based mostly...... the overall emissions. Electricity storage limits the amount of cycling but environmental benefits are related to the base load fleet in the system, i.e. having coal as base load causes an increase in emissions. Electricity imports and exports are likely to increase with the expansion of wind power...

  20. WASTE HANDLING BUILDING ELECTRICAL SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S.C. Khamamkar

    2000-06-23

    The Waste Handling Building Electrical System performs the function of receiving, distributing, transforming, monitoring, and controlling AC and DC power to all waste handling building electrical loads. The system distributes normal electrical power to support all loads that are within the Waste Handling Building (WHB). The system also generates and distributes emergency power to support designated emergency loads within the WHB within specified time limits. The system provides the capability to transfer between normal and emergency power. The system provides emergency power via independent and physically separated distribution feeds from the normal supply. The designated emergency electrical equipment will be designed to operate during and after design basis events (DBEs). The system also provides lighting, grounding, and lightning protection for the Waste Handling Building. The system is located in the Waste Handling Building System. The system consists of a diesel generator, power distribution cables, transformers, switch gear, motor controllers, power panel boards, lighting panel boards, lighting equipment, lightning protection equipment, control cabling, and grounding system. Emergency power is generated with a diesel generator located in a QL-2 structure and connected to the QL-2 bus. The Waste Handling Building Electrical System distributes and controls primary power to acceptable industry standards, and with a dependability compatible with waste handling building reliability objectives for non-safety electrical loads. It also generates and distributes emergency power to the designated emergency loads. The Waste Handling Building Electrical System receives power from the Site Electrical Power System. The primary material handling power interfaces include the Carrier/Cask Handling System, Canister Transfer System, Assembly Transfer System, Waste Package Remediation System, and Disposal Container Handling Systems. The system interfaces with the MGR Operations

  1. The “corruption” of the Criminal System: the Brazilian case

    Directory of Open Access Journals (Sweden)

    Ana Paula Repolês Torres

    2012-12-01

    Full Text Available We seek, in this article, from a sociological analysis of criminal law, to reflect on how social exclusion influences the very configuration of the crime and the criminal. Our hypothesis, based on the Systems Theory of Niklas Luhmann, is that there is, especially in the so-called “periphery” of modernity, a ‘corruption’ of the criminal system, in that it operates with distinctions that are alien to it, including only people who are excluded from other social sub-systems. We base the research on official data on the Brazilian criminal and penitentiary system, these data corroborating the impressions derived from field research.

  2. Social Skills Rating System - Brazilian Version: New Exploratory and Confirmatory Factorial Analyses

    Directory of Open Access Journals (Sweden)

    Lucas C. Freitas

    2015-01-01

    Full Text Available This study aimed to verify the Factorial Structure of the Brazilian version of the Social Skills Rating System (SSRS-BR, with an extended sample of participants, and their subsequent Confirmatory Factor Analyses in another subset of data. The analyses were based on a total sample of 942 evaluations of children between six and thirteen years of age, 817 evaluations of teachers and 562 evaluations of parents, residents of four Brazilian states. The exploratory factor analysis performed on half of the data, indicated a five-factor structure for the social skills scale for parents, and a four factor structure for the scales of the teachers and students. For the behavior problems scales, three factors were found in the instrument for parents and two factors in the instrument for the teacher. Confirmatory factor analysis showed satisfactory fit indices for the three instruments, after removing some items and performing some re-specifications.

  3. Wood gasification system for electricity production

    Energy Technology Data Exchange (ETDEWEB)

    Van Der Heijden, S.; Szladow, A.J.; Barabas, M.; Sirianni, G.

    1981-08-01

    A 65 kVA generation system using wood gasification for electricity production has been tested. The system efficiency, operability and response to load variations was determined. For a range of electric output from 5 to 45 kW, the overall efficiency varied from 9 to 20 percent. Changes in gas composition with load variation did not affect gas heating values. 3 refs.

  4. Software Engineering in Photo Electricity Orient System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    We have designed a photo electricity orient system to control nuclei physics experiments.In this paper I will introduce its software.This photo electricity orient systemic software is designed by C language.Exploitation environment is Turbo C of Borland Inc.Help design instrument is PlayCase.The block diagram of this software is given in Fig.1.

  5. Lunar Surface Solar Electric Power System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a concentrated photovoltaic electric power system for lunar operations called C-Lite Lunar. The novel technology produces a near-term solar array system...

  6. Tariffs and investments at the Brazilian electric sector; Tarifas e investimentos no setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Vela, Jorge Alberto Alcala; Almeida, Denizart do Rosario [ELETROBRAS - Centrais Eletricas Brasileiras, Rio de Janeiro, RJ (Brazil)

    2006-07-01

    The objective of the work is to identify the impacts of the variations in the tariffs of the electricity on the standard of growth of the consumption of electric energy, and the role that these variations had exerted in the allocation of resources by the companies of the sector, in the period 1995-2004. In this period, changes in the habits of consumption of energy due the adopted during the rationing, explain, in part, the reduction of the income-elasticity of the consumption of electric energy, but the contribution of a significant effect-price was important for this reduction. Also are evidenced, in this work, the categories of use and the regions that had more contributed for this effect. For the allocation of resources, from 1998 a decline of the participation of the investments in the sector in the total of investments of the economy is observed, with the companies of the sector presenting differentiated behaviors visibly. The companies of distribution apparently more privileged for the formation of resources, have presented, in the recent years, a declining evolution in its rate of investments when compared with the others segments. Among the determinative factors of the decisions of investment of the companies of distribution, can be mentioned the change in the standard of growth of the consumption and the effect of the evolution of the opportunity cost of the inversions. (author)

  7. Electric power system applications of optimization

    CERN Document Server

    Momoh, James A

    2008-01-01

    Introduction Structure of a Generic Electric Power System  Power System Models  Power System Control Power System Security Assessment  Power System Optimization as a Function of Time  Review of Optimization Techniques Applicable to Power Systems Electric Power System Models  Complex Power Concepts Three-Phase Systems Per Unit Representation  Synchronous Machine Modeling Reactive Capability Limits Prime Movers and Governing Systems  Automatic Gain Control Transmission Subsystems  Y-Bus Incorporating the Transformer Effect  Load Models  Available Transfer Capability  Illustrative Examples  Power

  8. Electricity system optimization in the EUMENA region

    OpenAIRE

    Huber, Matthias; Dorfner, Johannes; Hamacher, Thomas

    2013-01-01

    This report describes results of a techno-economic model optimizing a potential electricity generation system in the EUMENA region for the year 2050. In 32 scenarios, cost optimal systems for electricity generation, transmission and storage are calculated. The optimization goal is minimization of total system cost for annualized investment, operation and maintenance costs as well as fuel costs for the complete system. This includes cost elements for power plants, transmission networks and lar...

  9. Fractional linear systems and electrical circuits

    CERN Document Server

    Kaczorek, Tadeusz

    2015-01-01

    This monograph covers some selected problems of positive and fractional electrical circuits composed of resistors, coils, capacitors and voltage (current) sources. The book consists of 8 chapters, 4 appendices and a list of references. Chapter 1 is devoted to fractional standard and positive continuous-time and discrete-time linear systems without and with delays. In chapter 2 the standard and positive fractional electrical circuits are considered and the fractional electrical circuits in transient states are analyzed.  Descriptor linear electrical circuits and their properties are investigated in chapter 3,  while chapter 4 is devoted to the stability of fractional standard and positive linear electrical circuits. The reachability, observability and reconstructability of fractional positive electrical circuits and their decoupling zeros are analyzed in chapter 5. The fractional linear electrical circuits with feedbacks are considered in chapter 6. In chapter 7 solutions of minimum energy control for standa...

  10. The good, the bad and the ugly: The privatization of the Brazilian electricity distribution sector

    Energy Technology Data Exchange (ETDEWEB)

    Silvestre, Bruno; Hall, Jeremy; Matos, Stelvia; Figuiera, Luiz Augusto

    2010-09-15

    This paper analyzes the evolution of five electricity distribution companies in the Northeast of Brazil using technical and financial indexes. Three privatized and two public firms were analyzed between 1997 and 2008. The financial indexes are related to the capacity of the business to generate value for shareholders, while the technical indexes are related to the quality of service provided to customers. We observed the privatized firms had their financial indexes improved after the privatization, increasing the value of the firm for the shareholders. However, there is no evidence that the privatization affected the quality of service provided to consumers.

  11. Midwives and obstetric nurses in the Brazilian Unified Health System and Primary Health Care: for a systemic and progressive incorporation

    OpenAIRE

    Armando Henrique Norman; Charles Dalcanale Tesser

    2015-01-01

    The objective of this paper is to present a proposal for a gradual and systemic incorporation of midwives and obstetric nurses into the Brazilian Unified Health System (SUS) and Primary Health Care (PHC). The proposal was born from contact with the British experience, based on midwives, which is briefly described. In Brazil, these professionals would progressively take over the prenatal, delivery and postpartum care for pregnant women of usual risk in a region, in partnership with the PHC tea...

  12. Water and Land Use Efficiency in Current and Potential Future US Corn and Brazilian Sugarcane Ethanol Systems

    Science.gov (United States)

    Warner, E. S.; Zhang, Y.; Newmark, R. L.

    2012-12-01

    Biofuels represent an opportunity for domestic fuel production from renewable energy sources with potential environmental and social benefits such as reducing greenhouse gas (GHG) and promoting rural development. However, as demand for biofuel continues to increase worldwide, concerns about land competition between food and fuel, excessive water usage and other unintended environmental consequences have grown. Through a comparative study between US corn ethanol and Brazilian sugarcane ethanol, we examine the energy, land, water and GHG performance of the two largest industrial fuel ethanol production systems in the world. Our comparisons include current and potential future systems with improved agronomic practices, crop yields, ethanol conversion processes, and utilization of agricultural residues. Our results suggest that the average water footprints of US corn ethanol and Brazilian sugarcane ethanol are fairly close (108 and 110 m3/GJ of ethanol, respectively) while the variations can range from 50 to 250 m3/GJ for sugarcane ethanol and 50 to380 m3/GJ for corn ethanol. Results emphasize the need to examine the water footprint within the context of local and regional climatic variability, water availability, competing uses (e.g. agricultural, industrial, and municipal water needs) and other ecosystem constraints. Research is under way (at the National Renewable Energy Laboratory and other institutions) to develop models to analyze water supply and demand at the watershed-scale for current and future biomass production, and to understand the tradeoffs among water supply, demand and quality due to more intensive agricultural practices and expansion of biofuels. Land use efficiency metrics, with regards to life cycle GHG emissions (without land use change) savings through gasoline displacement with ethanol, illustrate the progression of the biofuel industry and the importance of maximizing bioenergy production by utilizing both the crops and the residues. A recent

  13. The BRAzilian Seismographic Integrated Systems (BRASIS: infrastructure and data management

    Directory of Open Access Journals (Sweden)

    João Carlos Dourado

    2011-04-01

    Full Text Available In geophysics and seismology, raw data need to be processed to generate useful information that can be turned into knowledge by researchers. The number of sensors that are acquiring raw data is increasing rapidly. Without good data management systems, more time can be spent in querying and preparing datasets for analyses than in acquiring raw data. Also, a lot of good quality data acquired at great effort can be lost forever if they are not correctly stored. Local and international cooperation will probably be reduced, and a lot of data will never become scientific knowledge. For this reason, the Seismological Laboratory of the Institute of Astronomy, Geophysics and Atmospheric Sciences at the University of São Paulo (IAG-USP has concentrated fully on its data management system. This report describes the efforts of the IAG-USP to set up a seismology data management system to facilitate local and international cooperation.

  14. Pragmatic electrical engineering systems and instruments

    CERN Document Server

    Eccles, William

    2011-01-01

    Pragmatic Electrical Engineering: Systems and Instruments is about some of the non-energy parts of electrical systems, the parts that control things and measure physical parameters. The primary topics are control systems and their characterization, instrumentation, signals, and electromagnetic compatibility. This text features a large number of completely worked examples to aid the reader in understanding how the various principles fit together.While electric engineers may find this material useful as a review, engineers in other fields can use this short lecture text as a modest introduction

  15. Optimal control applications in electric power systems

    CERN Document Server

    Christensen, G S; Soliman, S A

    1987-01-01

    Significant advances in the field of optimal control have been made over the past few decades. These advances have been well documented in numerous fine publications, and have motivated a number of innovations in electric power system engineering, but they have not yet been collected in book form. Our purpose in writing this book is to provide a description of some of the applications of optimal control techniques to practical power system problems. The book is designed for advanced undergraduate courses in electric power systems, as well as graduate courses in electrical engineering, applied mathematics, and industrial engineering. It is also intended as a self-study aid for practicing personnel involved in the planning and operation of electric power systems for utilities, manufacturers, and consulting and government regulatory agencies. The book consists of seven chapters. It begins with an introductory chapter that briefly reviews the history of optimal control and its power system applications and also p...

  16. Analysis of the evolution of after sales and post-consumption reverse logistics actions by the brazilian electricity sector in 2009 to 2011

    Directory of Open Access Journals (Sweden)

    Jessica Oliveira Sousa

    2014-12-01

    Full Text Available This study analyzes the evolution of of post-consumer reverse logistics actions by the Brazilian electric power sector in 2009 to 2011. The approach includes literature review, exploratory, descriptive, quantitative and qualitative research. In this study, a sample of 15 companies in the Brazilian energy sector were selected, based on content analysis of sustainability reports extracted from the company websites in 2009 to 2011. After collecting the data, 48 indicators were analyzed in the reports. Based on the scores, a comparative analysis between levels of disclosure of reverse logistics was performed. The 15 companies analyzed revealed the presence of reverse logistics actions in 2011, showing an overall result in the course of three years. Among the sectors presented, distribution achieved greater prominence in 2011, with an increase in the presence of post-consumption indicators, showing a great result.

  17. Bus bar electrical feedthrough for electrorefiner system

    Science.gov (United States)

    Williamson, Mark; Wiedmeyer, Stanley G; Willit, James L; Barnes, Laurel A; Blaskovitz, Robert J

    2013-12-03

    A bus bar electrical feedthrough for an electrorefiner system may include a retaining plate, electrical isolator, and/or contact block. The retaining plate may include a central opening. The electrical isolator may include a top portion, a base portion, and a slot extending through the top and base portions. The top portion of the electrical isolator may be configured to extend through the central opening of the retaining plate. The contact block may include an upper section, a lower section, and a ridge separating the upper and lower sections. The upper section of the contact block may be configured to extend through the slot of the electrical isolator and the central opening of the retaining plate. Accordingly, relatively high electrical currents may be transferred into a glovebox or hot-cell facility at a relatively low cost and higher amperage capacity without sacrificing atmosphere integrity.

  18. Electromagnetic interference filter for automotive electrical systems

    Science.gov (United States)

    Herron, Nicholas Hayden; Carlson, Douglas S; Tang, David; Korich, Mark D

    2013-07-02

    A filter for an automotive electrical system includes a substrate having first and second conductive members. First and second input terminals are mounted to the substrate. The first input terminal is electrically connected to the first conductive member, and the second input terminal is electrically connected to the second conductive member. A plurality of capacitors are mounted to the substrate. Each of the capacitors is electrically connected to at least one of the first and second conductive members. First and second power connectors are mounted to the substrate. The first power connector is electrically connected to the first conductive member, and the second power connector is electrically connected to the second conductive member. A common mode choke is coupled to the substrate and arranged such that the common mode choke extends around at least a portion of the substrate and the first and second conductive members.

  19. Potential of exchange of electric power between the electric systems of Brazil and Argentina; Potencial de intercambio de energia eletrica entre os sistemas eletricos do Brasil e da Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Zanette, Andre Luiz [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2010-07-01

    Integration of power generation and transmission systems can provide a better utilization of energy resources and increase systems reliability. Given that Brazilian interconnection with Argentina, which represents the major Brazilian interconnection with neighboring countries, is used basically in winter months or in situations of unfavorable hydrology, this paper aims to demonstrate that power exchange between these two countries can be much higher than currently observed, resulting in greater benefits for producers and consumers of electricity in both countries, and that these benefits can also be obtained through better use of existing and planned interconnections between South American countries. To estimate the potential for power exchange between the electrical systems of Brazil and Argentina, three sets of simulations using the Brazilian Energy Plan (PDE 2010-2019) deck for Newave model, available from EPE, were made. These simulations consider the possibility that: (i) electricity is exported from Brazil to Argentina (II) electricity is imported from Argentina and (III) electricity is exchanged in both directions. The simulation results indicate that, despite rising operational marginal costs, significant amounts of electricity can be exported to Argentina at relatively low prices, depending on hydrological conditions. Moreover, the possibility of electricity imports from Argentina can reduce the operational costs of Brazilian system, as well as minimizing the risk of shortages. This work shows that the interconnections between Brazil and Argentina may be better used to benefit producers and consumers in both countries. Therefore, it is necessary to define an effective contractual and operational model for power trading and electricity transfer between these countries with the objective of promoting stability and mutual trust. Finally, studies to evaluate the potential for electricity exchange between South American countries are specially important

  20. Special and inclusive education on brazilian legal system

    OpenAIRE

    Erenice Natália Soares de Carvalho

    2013-01-01

    In Brazil, the legal system where special and inclusive education is based upon is broad and has conquered some enhancements. However, we can observe contradictions and normative conflicts that affect its application into the teaching system’s organization and the inclusive education implementation. This reflection was conducted through this study, which has as an main objective, to identify divergences among various legal dispositions in force and the necessity to overcome them, taking into ...

  1. Electricity Demand and Energy Consumption Management System

    CERN Document Server

    Sarmiento, Juan Ojeda

    2008-01-01

    This project describes the electricity demand and energy consumption management system and its application to the Smelter Plant of Southern Peru. It is composted of an hourly demand-forecasting module and of a simulation component for a plant electrical system. The first module was done using dynamic neural networks, with backpropagation training algorithm; it is used to predict the electric power demanded every hour, with an error percentage below of 1%. This information allows management the peak demand before this happen, distributing the raise of electric load to other hours or improving those equipments that increase the demand. The simulation module is based in advanced estimation techniques, such as: parametric estimation, neural network modeling, statistic regression and previously developed models, which simulates the electric behavior of the smelter plant. These modules allow the proper planning because it allows knowing the behavior of the hourly demand and the consumption patterns of the plant, in...

  2. Electric power systems analysis and control

    CERN Document Server

    Saccomanno, Fabio

    2003-01-01

    "Highly relevant and timely in scope, the book is essential reading for anyone associated with electric power systems, including students and teachers of power engineering courses, professionals in the industry, consultants, and researchers."--Jacket.

  3. Modeling of Hybrid Marine Electric Propulsion Systems

    OpenAIRE

    Gåsemyr, Øyvind Rønneberg

    2014-01-01

    Energy storage devices integrated in diesel-electric power systems is believed to have impact also in marine applications, when it comes to emissions and fuel efficiency. For certain load conditions energy storage can act as load buffers which will decrease the load variations on the generator sets, hence optimizing the operation when is comes to emissions and fuel efficiency.In this context this thesis is aimed at development of simulation tools for hybrid marine electric propulsion systems....

  4. Interaction between information systems and work in the brazilian banking sector

    Directory of Open Access Journals (Sweden)

    Elaine Tavares

    2011-01-01

    Full Text Available This article presents the results of a research to understand the conditions of interaction between work and three specific information systems (ISs used in the Brazilian banking sector. We sought to understand how systems are redesigned in work practices, and how work is modified by the insertion of new systems. Data gathering included 46 semi-structured interviews, together with an analysis of system-related documents. We tried to identify what is behind the practices that modify the ISs and work. The data analysis revealed an operating structure: a combination of different practices ensuring that the interaction between agents and systems will take place. We discovered a structure of reciprocal conversion caused by the increased technical skills of the agent and the humanization of the systems. It is through ongoing adjustment between work and ISs that technology is tailored to the context and people become more prepared to handle with technology.

  5. SITE ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    E.P. McCann

    1999-04-16

    The Site Electrical Power System receives and distributes utility power to all North Portal site users. The major North Portal users are the Protected Area including the subsurface facility and Balance of Plant areas. The system is remotely monitored and controlled from the Surface Operations Monitoring and Control System. The system monitors power quality and provides the capability to transfer between Off-Site Utility and standby power (including dedicated safeguards and security power). Standby power is only distributed to selected loads for personnel safety and essential operations. Security power is only distributed to essential security operations. The standby safeguards and security power is independent from all other site power. The system also provides surface lighting, grounding grid, and lightning protection for the North Portal. The system distributes power during construction, operation, caretaker, and closure phases of the repository. The system consists of substation equipment (disconnect switches, breakers, transformers and grounding equipment) and power distribution cabling from substation to the north portal switch gear building. Additionally, the system includes subsurface facility substation (located on surface), switch-gear, standby diesel generators, underground duct banks, power cables and conduits, switch-gear building and associated distribution equipment for power distribution. Each area substation distributes power to the electrical loads and includes the site grounding, site lighting and lightning protection equipment. The site electrical power system distributes power of sufficient quantity and quality to meet users demands. The Site Electrical Power System interfaces with the North Portal surface systems requiring electrical power. The system interfaces with the Subsurface Electrical Distribution System which will supply power to the underground facilities from the North Portal. Power required for the South Portal and development side

  6. [Financing in Brazilian health care system: a recent retrospective and dentistry approach].

    Science.gov (United States)

    Nóbrega, Carolina Bezerra Cavalcanti; Hoffmann, Rosana Helena Schllitler; Pereira, Antonio Carlos; Meneghim, Marcelo de Castro

    2010-06-01

    The guided policies designed to modify the health care system occurred in three stages: the first occurred at the end of the military regimen with the implantation of the Integrated Actions of Health (AIS); the second came with the implantation of the Unified and Decentralized Health System (SUDS) in 1987; and the third was the promulgation of the Constitution in 1988, when the Brazilian Unified Health System (SUS), an organizational structure based on principles of citizenship and social justice, was then created. With the creation of SUS, there was the need for defining objectives and strategic lines of direction for the decentralization process, concerning responsibility aspects, relations among managers, and criteria of transference from federal to state and municipal levels. Thus, the objective of this study was to accomplish a recent retrospective of the budgetary plan aimed at health care, with an approach on dental care. Data collected from the Ministry of Health (DATASUS) between 1998 and 2005 were used in this retrospective study. In conclusion, a positive situation was observed for transferred annual values, suggesting that the reorganization and financial structure of the Brazilian health system is starting to work. PMID:20640338

  7. Flexibility valuation in the Brazilian power system: A real options approach

    International Nuclear Information System (INIS)

    This paper presents a valuation study of operational flexibility in the complex Brazilian Power System. Thermopower plants represent operational flexibility for the national system operator provided they can be dispatched in dry periods to supply part of the load when reservoir waters are too low. Deficit costs can be avoided as a result. We have adopted a real options approach to calculate the fair value of a financial subsidy to be paid to thermal generators for their availability to the system. A financial subsidy is mandatory for their economic feasibility and, therefore, for increased thermopower capacity in the Brazilian Power System. This is why this policy is currently being studied by Brazil's federal government. In order to illustrate our modeling we have run the model for the southeast subsystem. We found a flexibility value of US$4.52 billion, which represents US$497/MW per year. This means that a 100 MW thermopower plant should receive US$49,700 for each year of its economic lifetime as a fair premium incentive to investments

  8. Cost of diseases related to alcohol consumption in the Brazilian Unified Health System

    Science.gov (United States)

    Coutinho, Evandro Silva Freire; Bahia, Luciana; Barufaldi, Laura Augusta; Abreu, Gabriela de Azevedo; Malhão, Thainá Alves; Pepe, Camila Ribeiro; Araujo, Denizar Vianna

    2016-01-01

    ABSTRACT OBJECTIVE To estimate the direct costs associated to outpatient and hospital care of diseases related to alcohol consumption in the Brazilian Unified Health System. METHODS Attributable populational risks were estimated for the selected diseases related to the use of 25 g/day or more of ethanol (risk consumption), considering a relative risk (RR) ≥ 1.20. The RR estimates were obtained from three meta-analysis. The risk consumption rates of the Brazilian population ≥ 18 years old were obtained by a national survey. Data from the Hospital Information System of SUS (HIS-SUS) were used to estimate the annual costs of the health system with the diseases included in the analysis. RESULTS The total estimated costs for a year regarding diseases related to risk consumption were U$8,262,762 (US$4,413,670 and US$3,849,092, for outpatient and hospital care, respectively). CONCLUSIONS Risk consumption of alcohol is an important economic and health problem, impacting significantly the health system and society. PMID:27305403

  9. [Market and public policy network failures: challenges and possibilities for the Brazilian Unified Health System].

    Science.gov (United States)

    Pinheiro Filho, Francisco Percival; Sarti, Flávia Mori

    2012-11-01

    The principles and guidelines of the Brazilian Unified Health System (SUS) impose a healthcare service structure based on public policy networks which, combined with the financing model adopted, leads to market failings. This imposes barriers to the management of the public health system and the enactment of SUS objectives. The institutional characteristics and the heterogeneity of players, allied to the existence of different healthcare approaches, generate analytical complexity in the study of the global dynamics of the SUS network. There are limitations in the use of quantitative methods based on static analysis of retrospective SUS data. Thus, an approach taking SUS as a complex system using innovative quantitative methodology based on computational simulation is proposed. This paper sought to analyze challenges and possibilities of the combined application of cellular automata modeling and agent-based modeling for simulation of the evolution of the SUS healthcare service network. This approach should permit better understanding of the organization, heterogeneity and structural dynamics of the SUS service network and a minimization of the effects of market failings on the Brazilian health system. PMID:23175305

  10. [Market and public policy network failures: challenges and possibilities for the Brazilian Unified Health System].

    Science.gov (United States)

    Pinheiro Filho, Francisco Percival; Sarti, Flávia Mori

    2012-11-01

    The principles and guidelines of the Brazilian Unified Health System (SUS) impose a healthcare service structure based on public policy networks which, combined with the financing model adopted, leads to market failings. This imposes barriers to the management of the public health system and the enactment of SUS objectives. The institutional characteristics and the heterogeneity of players, allied to the existence of different healthcare approaches, generate analytical complexity in the study of the global dynamics of the SUS network. There are limitations in the use of quantitative methods based on static analysis of retrospective SUS data. Thus, an approach taking SUS as a complex system using innovative quantitative methodology based on computational simulation is proposed. This paper sought to analyze challenges and possibilities of the combined application of cellular automata modeling and agent-based modeling for simulation of the evolution of the SUS healthcare service network. This approach should permit better understanding of the organization, heterogeneity and structural dynamics of the SUS service network and a minimization of the effects of market failings on the Brazilian health system.

  11. Electrical aspects of photovoltaic-system simulation

    Science.gov (United States)

    Hart, G. W.; Raghuraman, P.

    1982-06-01

    A TRNSYS simulation was developed to simulate the performance of utility interactive residential photovoltaic energy systems. The PV system is divided into major functional components, which are individually described with computer models. The results of simulation and actual measured data are compared. The electrical influences on the design of such photovoltaic energy systems are given particular attention.

  12. DC Power System of Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Zhang Liwei

    2013-11-01

    Full Text Available In recent years, environmental and energy problem has become one of the world's hot spot problems. Today, the road cars not only consume a lot of oil resource, but also cause serious pollution to human survival environment. Therefore, to save energy and protect environment, a green environmental friendly electric car instead of fuel car will be needed for sustainable development of the society. Electric vehicle has no pollution, low noise, high efficiency, diversification, simple structure and convenient maintaining; the development of green cleaning electric vehicle is the trend, and the inevitable choice. The power supply system of electric vehicle can be divided into three parts, the battery charging system, motor drive system and dc load power supply system. This paper mainly studies the dc load power supply system. Main function is to convert the high-voltage of the battery in the electric vehicle into low voltage output, provide the power supply for the low voltage dc load, including the car safety system, windshield wiper system, audio system. On the basis of the analysis of the parameters, this article designs the converter, sets up the principle prototype, analyzes the experimental results and finally makes conclusion. The vehicle power supply is green, environment friendly, high-efficiency, digital and intelligent.    

  13. Competitive strategies and models of business management in the Brazilian electric sector; Estrategias competitivas e modelos de gestao empresarial no setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, Breno Pinto

    1999-12-15

    This study draws attention to the fact that most of the discussions and studies related to the restructuring of electricity industry in Brazil, almost exclusively address the technological and institutional aspects involved in the question, when competitive strategies and management models to be followed by power companies are essential to ensure the consolidation of new design of the institutional industry in the daily operation of business. The proposition is that the evaluation of competitive strategies and management models can be a working tool for the State, in addition to offer to the electric power companies administrators an initial map or check list for planning and operation of its business, in the institutional model that is being implemented for the Brazilian electric sector.

  14. Renewable and efficient electric power systems

    CERN Document Server

    Masters, Gilbert M

    2013-01-01

    A solid, quantitative, practical introduction to a wide range of renewable energy systems-in a completely updated, new edition The second edition of Renewable and Efficient Electric Power Systems provides a solid, quantitative, practical introduction to a wide range of renewable energy systems. For each topic, essential theoretical background is introduced, practical engineering considerations associated with designing systems and predicting their performance are provided, and methods for evaluating the economics of these systems are presented. While the book focuses on

  15. Demonstrations of electric heating systems. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Haapakoski, M.; Laitila, R.; Ruska, T.

    1998-07-01

    In 1991, Imatran Voima launched the Demonstration Project of Electric Heating Systems. The project investigated in detail the energy consumption, housing comfort and electric power output rates of approximately one hundred electrically heated single-family houses and updated the investment cost information of heating systems. The project implemented and monitored quality electric heating concepts that guarantee a high standard of housing comfort. The targets in the project provided with combinations of floor, ceiling and window heating systems totalled 33. Furthermore, the project included 42 targets provided with water-circulated floor or radiator heating systems and 22 houses that had moved from oil or district heating systems into electric heating. The number of metering years received in the energy consumption measurements totalled 339. During the course of the project, six partial reports, one master's thesis and three summary reports were published. This is the final report of the project. It deals in brief with the major results. The best electric heating concept, in terms of housing comfort, is a floor heating system using cables supplemented by ceiling and window heating. Thanks to the heating units installed in the structures, the operative temperature grows by about one degree in comparison with a corresponding target heated with radiators. A typical, room-specifically-heated 140 m{sup 2} house consumes a total of 24,000 kWh of energy per year. Of this amount, electric space heating accounts for 11,500 kWh, heating with wood for 1,500 kWh, heating of tap water for 4,000 kWh and household electricity for 7,000 kWh. In a house provided with a water-circulated electric heating system the total energy consumption is, owing to the adjustment and storage losses, about 10 % higher. Of the energy consumption in the house, most part takes place during the period of nighttime electricity. The nighttime load in a 24-hour period with very low temperatures

  16. Green electricity: Tracking systems for environmental disclosure

    Energy Technology Data Exchange (ETDEWEB)

    Biewald, B.E.; Ramey, J.A. [Synapse Energy Economics, Inc., Cambridge, MA (United States)

    1997-12-31

    For the first time, electricity consumers in the US are beginning to choose their generation providers. One of the opportunities created by the introduction of retail choice in electricity is the chance for customers to influence the mix of generating resources through their purchasing decisions. Some environmentally aware consumers will want {open_quotes}clean,{close_quotes} {open_quotes}green,{close_quotes} or renewable power. While some suppliers will attempt to differentiate themselves according to their environmental performance, such claims for green electricity can be particularly difficult to verify given the complexity of the interconnected electric system. Because electricity is delivered over an integrated transmission grid and kilowatt-hours at the point of retail sale are indistinguishable from each other; disclosure requires tracking protocols to attribute generation at power plants to sales at the customers` meters. Fortunately, it is possible to implement a workable disclosure system. Some states have already included disclosure requirements in their electric industry restructuring orders and legislation. In this paper, a set of design criteria for an environmental disclosure system are presented along with two methods for disclosure: the company approach and the product approach. In addition, the authors discuss of power pools, data availability issues, and propose a company-based disclosure system using a {open_quotes}wholesale sales first{close_quotes} approach to transaction accounting.

  17. The Dynamic Balancer electrical safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Konkel, H.

    1997-12-01

    The Pantex Plant Dynamic Balancer is used to identify physical imbalance in some weapon systems. This study was conducted at the request of the US Department of Energy/Albuquerque Operations Office (USDOE/AL) Dynamic Balancer Project Team to identify the electrical conditions required for motor over-speed to occur and to discuss the functions of the various electrical protective features associated with the Dynamic Balancer (DB). As is shown through the development of a fault tree, numerous electrical and human failures are required for over-speed conditions to occur. As directed by the Project Team, no effort was made to develop detailed fault trees for all electrical systems, to quantify basic events in the fault tree, or to develop accident scenarios leading to or resulting from over-speed. The Pantex Building 12-60, Bay 2, facility electrical circuits and grounding are described, and potential hazards are discussed. DB motor over-speed is a safety concern, and therefore, the controls that limit this condition are described and discussed in detail. Other safety-significant electrical circuits are discussed as well. These safety systems also are described in the facility Basis for Interim Operation. A potential for a motor over-speed that is not sensed by the standard safety protective systems does exist. This fault pathway is discussed, and recommendations to mitigate its effect are made.

  18. Case–control association study of polymorphisms in the angiotensinogen and angiotensin-converting enzyme genes and coronary artery disease and systemic artery hypertension in African-Brazilians and Caucasian-Brazilians

    Indian Academy of Sciences (India)

    Ricardo Bonfim-Silva; Larissa Oliveira Guimarães; Jandson Souza Santos; Jaqueline Fagundes Pereira; Ana Angélica Leal Barbosa; Domingos Lazaro Souza Rios

    2016-03-01

    The rennin–angiotensin–aldosterone system (RAAS) is a critical pathway in regulating blood pressure and salt/water homeostasis, possessing an intimate relationship with the development of systemic artery hypertension (SAH). Once hypertension is considered a risk factor for coronary artery disease (CAD), the RAAS is also related to this pathology. This investigation aimed to analyse if the frequencies of AGT M235T (rs699) and ACE I/D (rs4646994) polymorphisms are associated with CAD and SAH in African-Brazilians and Caucasian-Brazilians. In this study we analysed 714 subjects who underwent coronary angiography to detect obstructive lesions and CAD, as well as blood pressure measurement and SAH, grouped according to ethnicity: 266 African-Brazilians and 448 Caucasian-Brazilians. Among CAD and SAH cases and controls, the genotype and allele frequencies of ACE I/D polymorphism were similar in both ethnic groups. The AGT 235TT genotype and 235T allele frequencies were higher in SAH cases (32%, 54.7%) versus controls in Caucasian-Brazilians (19.8%, 46.4%; = 0.038, = 0.031, respectively). The AGT 235TT (OR = 1.8; = 0.028) demonstrated to be an independent factor risk in a multivariate logistic regression increasing SAH risk in Caucasians but not in African-Brazilians. In summary, AGT M235T polymorphism was associated with SAH risk in Caucasian-Brazilians, and no association was detected with CAD. No association was also observed in ACE I/D polymorphism either in CAD or SAH in African-Brazilians and Caucasian-Brazilians.

  19. The concurrence safeguard on Brazilian electric power sector and the introduction of the competition; A defesa da concorrencia no setor eletrico brasileiro e a introducao da competicao

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, Jose Guilherme A. do; Ribeiro Filho, Ary Pinto; Ishihara, Claudio Akio [Agencia Nacinal de Enegia Eletrica (ANEEL), Brasilia, DF (Brazil)

    1999-07-01

    The central issue of debate is the need to align the energy sector's options and organization with changing global patterns of economic and social development, characterized by the increasing role played by the private sector, greater integration in the world economy, and new economic and social priorities such as efficiency, decentralization, deregulation, and a closer attention to environmental issues. In this context, the aim of the work is to introduce the incentive to the competition as government policy instrument for Brazilian electric power sector.

  20. Probabilistic evaluation of the Brazilian interconnected power systems; Avaliacao probabilistica do desempenho do sistema interligado brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Melo, A.C.G.; Mello, J.C.O.; Romero, S.P.; Oliveira, G.C. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Fontoura Filho, R.N. [ELETROBRAS, Rio de Janeiro, RJ (Brazil)

    1994-12-31

    This paper describes the main features of the NH{sub 2} model, developed for the probabilistic evaluation of the adequacy of large scale power systems. The system analysis is carried out through a full set of indicators, including reliability indices and probability distributions of selected variables, such as area interchanges, power flow in circuits, voltage in buses etc. These indicators are calculated in two stages: before and after the introduction of remedial actions. Also, the model yields the representation of system hourly load curve, with uncertainty around the load levels. The flexibility and performance of the NH2 model are illustrated in case studies with a 1400-bus, configuration of the Brazilian system. (author) 12 refs., 11 figs., 6 tabs.

  1. Bender-gradual scoring system: performance of Brazilian and Peruvian children.

    Science.gov (United States)

    dos Santos, Acácia Aparecida Angeli; Noronha, Ana Paula Porto; Rueda, Fabián Javier Marín; Segovia, José Livia

    2014-06-01

    This is a transcultural study of a sample of Peruvian and Brazilian children using the Bender-Gradual Scoring System (B-SPG), which considers shape distortion as the only aspect to be analyzed, assuming that perceptual-motor maturity is independent of cultural context. The study verified that the scoring system has psychometric qualities such that it may be applied in another country. The sample consisted of 231 children, ages 6 to 10 yr., 108 from different districts of the province Lima in Peru, and 123 children from three states in Brazil. During test application, the figures were projected to children in groups. Scoring the protocols for errors was conducted by psychologists experienced in interpreting and correcting the Bender-SPG, who rigorously followed instructions in Portuguese and Spanish. The results obtained with Differential Item Functioning (DIF) analysis indicated that Figures 1 and 4 presented DIF, one favoring Brazilian children and the other Peruvian children. Thus, it was concluded that the overall scores did not favor either population and the Bender-SPG could be used to evaluate perceptual-motor maturity in both countries.

  2. Implementing International Health Regulation (2005) in the Brazilian legal-administrative system.

    Science.gov (United States)

    Lima, Yara Oyram Ramos; Costa, Ediná Alves

    2015-06-01

    The scope of this study was to analyze how the International Sanitary Regulation (ISR 2005)has been incorporated into the Brazilian legal-administrative system, in relation to sanitary control measures involving freight, means of transportation and travelers and possible alterations to health surveillance activities, competencies and procedures. This case study has been undertaken using a qualitative approach, of a descriptive and exploratory nature, using institutional data sources and interviews with key-informants involved in implementing ISR (2005). Alterations to the Brazilian legal-administrative system resulting from ISR (2005) were identified, in relation to standards, special competencies and procedures relating to sanitary controls for freight, modes of transportation and travelers. In its present form, the International Sanitary Regulation is an instrument that, in addition to introducing new international and national sanitary control concepts and elements, also helps to clarify questions that are helpful on a national level, relating to the specific competencies and procedures which will, to a certain extent, put pressure on administrative structures in the areas of sanitary control and surveillance.

  3. United Kingdom electric system privatization

    Energy Technology Data Exchange (ETDEWEB)

    Lolli, A. (Bologna Univ. (Italy))

    1992-03-01

    This paper reviews the mechanics and first results of deregulation in the electric power industry of the United Kingdom. Several aspects are dealt with, namely: 1983 Energy Act impacts on ownership and subsequent changes brought about by the 1989 Energy Act; the Act's stipulations with regard to share acquisition and distribution; the division of the patrimony of the Area Boards; natural monopolistic characteristics of power distribution; vertical integration in Scotland, target investment limits in Government and public participation; the 'golden share' concept to guarantee public participation; current 40% share ownership by the Government; 15% private ownership limit for individual investors; external control by Government of licensing and rate structure setting; the impacts of organizational changes on the overall cost benefits of deregulation; modified Governmental regulatory powers; measures to ensure competition and consumer protection; provisions regarding misbehaviour; second tier suppliers and reserve fuel supply obligations; deregulation impacts on nuclear power marketing; power pooling regulations; installation of new transmission lines; provisions encouraging the use of diverse energy sources; franchising; interconnection with national grid; regulation of technical operations; standby as it affects rate structure; and spot market pricing.

  4. The renewable electric plant information system

    Energy Technology Data Exchange (ETDEWEB)

    Sinclair, K.

    1995-12-01

    This report explains the procedures used for creating the Renewable Electric Plant Information System (REPiS) database, describes the database fields, and summarizes the data. The REPiS database contains comprehensive information on grid-connected renewable electric generation plants in the United States. Originally designed in 1987 and updated in 1990, the database includes information through 1994. The report also illustrates ways of using the data for analysis is and describes how researchers validated the data.

  5. Electrical overstress (EOS) devices, circuits and systems

    CERN Document Server

    Voldman, Steven H

    2013-01-01

    Electrical Overstress (EOS) continues to impact semiconductor manufacturing, semiconductor components and systems as technologies scale from micro- to nano-electronics.  This bookteaches the fundamentals of electrical overstress  and how to minimize and mitigate EOS failures. The text provides a clear picture of EOS phenomena, EOS origins, EOS sources, EOS physics, EOS failure mechanisms, and EOS on-chip and system design.  It provides an illuminating insight into the sources of EOS in manufacturing, integration of on-chip, and system level EOS protection networks, followed by examples in spe

  6. Results of two Albedo systems in a Brazilian neutron individual monitoring comparison

    International Nuclear Information System (INIS)

    In 2012, the Brazilian National Metrology Laboratory sponsored the First Brazilian National Comparison of Measurements with Neutron Individual Monitors. The Thermoluminescent Dosimetry Laboratory of the Institute of Radioprotection and Dosimetry IRD/CNEN-RJ participated in it with its two albedo systems: one-component and two-component albedo monitors. The one component is composed by two capsules in a belt and each capsule has a pair of TLD for albedo neutron detection. The two-component consists of one capsule in a belt with two pairs of TLD: one pair for the measurement of the incident neutrons and the other for albedo neutrons. This paper presents the results of both systems in that comparison. The irradiation of the monitors was performed in four different values of Hp(10,0 deg) in a traceable 241Am-Be ISO standard reference neutron field. For both systems, it was observed that the evaluated dose values are very close to the reference dose values which each monitor has been undergone. Considering the mean values, the two-component albedo monitor has performance a little bit better than the one-component one but the results of both systems are statistically equal. For both systems, the responses are close to 1 and inside the trumpet curves. Thus, the results of two systems confirm their good accuracy and reproducibility in the tested neutron field and indicate that are able to evaluate the occupational neutron doses. This work confirms the importance of the inter-laboratory comparison programs to verification of the reliability of individual monitoring systems. (author)

  7. Results of two Albedo systems in a Brazilian neutron individual monitoring comparison

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Everton R.; Martins, Marcelo M.; Mauricio, Claudia L.P.; Freitas, Bruno M., E-mail: everton@ird.gov.br, E-mail: marcelo@ird.gov.br, E-mail: claudia@ird.gov.br, E-mail: brunofreitas@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Divisao de Dosimetria

    2013-07-01

    In 2012, the Brazilian National Metrology Laboratory sponsored the First Brazilian National Comparison of Measurements with Neutron Individual Monitors. The Thermoluminescent Dosimetry Laboratory of the Institute of Radioprotection and Dosimetry IRD/CNEN-RJ participated in it with its two albedo systems: one-component and two-component albedo monitors. The one component is composed by two capsules in a belt and each capsule has a pair of TLD for albedo neutron detection. The two-component consists of one capsule in a belt with two pairs of TLD: one pair for the measurement of the incident neutrons and the other for albedo neutrons. This paper presents the results of both systems in that comparison. The irradiation of the monitors was performed in four different values of H{sub p}(10,0 deg) in a traceable {sup 241}Am-Be ISO standard reference neutron field. For both systems, it was observed that the evaluated dose values are very close to the reference dose values which each monitor has been undergone. Considering the mean values, the two-component albedo monitor has performance a little bit better than the one-component one but the results of both systems are statistically equal. For both systems, the responses are close to 1 and inside the trumpet curves. Thus, the results of two systems confirm their good accuracy and reproducibility in the tested neutron field and indicate that are able to evaluate the occupational neutron doses. This work confirms the importance of the inter-laboratory comparison programs to verification of the reliability of individual monitoring systems. (author)

  8. Systems Engineering of Electric and Hybrid Vehicles

    Science.gov (United States)

    Kurtz, D. W.; Levin, R. R.

    1986-01-01

    Technical paper notes systems engineering principles applied to development of electric and hybrid vehicles such that system performance requirements support overall program goal of reduced petroleum consumption. Paper discusses iterative design approach dictated by systems analyses. In addition to obvious peformance parameters of range, acceleration rate, and energy consumption, systems engineering also considers such major factors as cost, safety, reliability, comfort, necessary supporting infrastructure, and availability of materials.

  9. Query Methods of Electric Power System

    Institute of Scientific and Technical Information of China (English)

    Zou Haokai; Wu Xusheng

    2016-01-01

    With the development of electric power network, the quantities and styles of power equipment also increase at every time. It is very important to achieve the information in the power system of the equipment operation fast and effectively. This article summarizes three current commonly methods for power system then analyses the advantages, disadvantages and discusses the application territory respectively.

  10. Work conditions and occupational health of dentists in Brazilian Public Health System

    Directory of Open Access Journals (Sweden)

    Suzely Adas Saliba Moimaz

    2014-03-01

    Full Text Available Introduction: work healthy conditions are essential for a great professional performance. Objective: To verify the perception of dentists regarding structural and healthy conditions of dental offices in the Brazilian Public Health System (SUS and their satisfaction with work and public job. Material and Method: In this cross-sectional study, type inquiry, 24 Brazilian dentists were interviewed. The follow variables were asked: cleaning and asepsis; maintenance and time of use of dental equipment; satisfaction with work and public job. Results: The professionals were "satisfied" or "very satisfied" with cleaning and asepsis (66.67%; Dental equipment (54.17%, reflectors (54.17% and the dental chairs (54.17% had more than 24 years of use; 20% of all professionals said that the equipment had maintenance but only to fix them. Of total, 58.33% had already given no attendance for patients and broken equipment was the most frequent cause (92.86%. It was observed satisfaction with work (79.1% and public job (95.83%. It was concluded that dentists who worked in SUS were satisfied with public job, although they had said the need for improvement on structural and healthy work conditions.

  11. Trends in elderly psychiatric admissions to the Brazilian public health care system

    Directory of Open Access Journals (Sweden)

    Pedro L. Ritter

    2016-01-01

    Full Text Available Objective: To evaluate trends in psychiatric bed occupancy by elderly inpatients in the Brazilian public health care system between 2000 and 2010 and to determine the leading psychiatric diagnosis for hospital admissions. Methods: Data from all 895,476 elderly psychiatric admissions recorded in the Brazilian Public Health Care Database (DATASUS between January 2000 and February 2010 were analyzed. Polynomial regression models with estimated curve models were used to determine the trends. The number of inpatient days was calculated for the overall psychiatric admissions and according to specific diagnoses. Results: A moderate decreasing trend (p < 0.001 in the number of inpatient days was observed in all geriatric psychiatric admissions (R2 = 0.768 and in admissions for organic mental disorders (R2 = 0.823, disorders due to psychoactive substance use (R2 = 0.767, schizophrenia (R2 = 0.680, and other diagnoses (R2 = 0.770, but not for mood disorders (R2 = 0.472. Most admissions (60 to 65% were due to schizophrenia. Conclusion: There was a decreasing trend in inpatient days for elderly psychiatric patients between 2000 and 2010. The highest bed occupancy was due to schizophrenia, schizotypal, and delusional disorders.

  12. Highly Efficient Contactless Electrical Energy Transmission System

    Science.gov (United States)

    Ayano, Hideki; Nagase, Hiroshi; Inaba, Hiromi

    This paper proposes a new concept for a contactless electrical energy transmission system for an elevator and an automated guided vehicle. The system has rechargeable batteries on the car and electrical energy is supplied at a specific place. When electric power is supplied to the car, it runs automatically and approaches the battery charger. Therefore, a comparatively large gap is needed between the primary transformer at the battery charger and the secondary transformer on the car in order to prevent damage which would be caused by a collision. In this case, a drop of the transformer coupling rate due to the large gap must be prevented. In conventional contactless electrical energy transmission technology, since electric power is received by a pick-up coil from a power line, a large-sized transformer is required. And when the distance over which the car runs is long, the copper loss of the line also increases. The developed system adopts a high frequency inverter using a soft switching method to miniaturize the transformer. The system has a coupling rate of 0.88 for a transformer gap length of 10mm and can operate at 91% efficiency.

  13. Decentralized energy systems for clean electricity access

    Science.gov (United States)

    Alstone, Peter; Gershenson, Dimitry; Kammen, Daniel M.

    2015-04-01

    Innovative approaches are needed to address the needs of the 1.3 billion people lacking electricity, while simultaneously transitioning to a decarbonized energy system. With particular focus on the energy needs of the underserved, we present an analytic and conceptual framework that clarifies the heterogeneous continuum of centralized on-grid electricity, autonomous mini- or community grids, and distributed, individual energy services. A historical analysis shows that the present day is a unique moment in the history of electrification where decentralized energy networks are rapidly spreading, based on super-efficient end-use appliances and low-cost photovoltaics. We document how this evolution is supported by critical and widely available information technologies, particularly mobile phones and virtual financial services. These disruptive technology systems can rapidly increase access to basic electricity services and directly inform the emerging Sustainable Development Goals for quality of life, while simultaneously driving action towards low-carbon, Earth-sustaining, inclusive energy systems.

  14. Switching in electrical transmission and distribution systems

    CERN Document Server

    Smeets, René; Kapetanovic, Mirsad; Peelo, David F; Janssen, Anton

    2014-01-01

    Switching in Electrical Transmission and Distribution Systems presents the issues and technological solutions associated with switching in power systems, from medium to ultra-high voltage. The book systematically discusses the electrical aspects of switching, details the way load and fault currents are interrupted, the impact of fault currents, and compares switching equipment in particular circuit-breakers. The authors also explain all examples of practical switching phenomena by examining real measurements from switching tests. Other highlights include: up to date commentary on new develo

  15. [Legislation on primary care in Brazilian Unified National Health System: document analysis].

    Science.gov (United States)

    Domingos, Carolina Milena; Nunes, Elisabete de Fátima Polo de Almeida; Carvalho, Brígida Gimenez; Mendonça, Fernanda de Freitas

    2016-03-01

    A reflection on Brazil's legislation for primary care helps understand the way health policy is implemented in the country. This study focuses on the legal provisions aimed at strengthening primary care, drawing on an analysis of documents from the Ministry of Health's priority actions, programs, and strategies. A total of 224 provisions were identified, in two groups of documents, so-called instituting provisions and complementary provisions. The former include the principles and guidelines of the Brazilian Unified National Health System (SUS) and also involve the expansion of actions. Financing was a quantitatively central theme, especially in the complementary provisions. The analysis led to reflection on the extent to which these strategies can induce linkage between health system managers and civil society in building a political project resulting in improvements and meeting the population's health needs. PMID:27027459

  16. Social and organizational impacts of the electronic processing system of the brazilian superior tribunal of justice

    Directory of Open Access Journals (Sweden)

    Christiana Soares de Freitas

    2015-10-01

    Full Text Available This paper presents a study on the social and organizational impacts of the Electronic Processing System (EPS implemented in 2008 by the Brazilian Superior Tribunal of Justice (STJ. This system is part of a wider transformation process involving the implementation of a new management model at the STJ. The theoretical framework is based on the Technology Enactment Theory and other studies on the role of technological innovations in public organizations (Fountain, 2005; Freitas, 2012. The main goal of the research is to identify the most significant factors facilitating or inhibiting the innovation adoption. Results show different impacts of the EPS on professional groups and organizations. Political, cultural and economic aspects influence stakeholders’ perceptions of the innovation, including its sustainability, time and costs savings that impact the rate of adoption and the realization of benefits both to users and the organization investing in its development.

  17. [Legislation on primary care in Brazilian Unified National Health System: document analysis].

    Science.gov (United States)

    Domingos, Carolina Milena; Nunes, Elisabete de Fátima Polo de Almeida; Carvalho, Brígida Gimenez; Mendonça, Fernanda de Freitas

    2016-03-01

    A reflection on Brazil's legislation for primary care helps understand the way health policy is implemented in the country. This study focuses on the legal provisions aimed at strengthening primary care, drawing on an analysis of documents from the Ministry of Health's priority actions, programs, and strategies. A total of 224 provisions were identified, in two groups of documents, so-called instituting provisions and complementary provisions. The former include the principles and guidelines of the Brazilian Unified National Health System (SUS) and also involve the expansion of actions. Financing was a quantitatively central theme, especially in the complementary provisions. The analysis led to reflection on the extent to which these strategies can induce linkage between health system managers and civil society in building a political project resulting in improvements and meeting the population's health needs.

  18. Dynamics of risk management in the regulated contracting environment of the Brazilian electrical sector; Dinamica da gestao de riscos no ambiente de contratacao regulada do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Fabio Cavaliere de

    2008-11-15

    This thesis analyses the dynamics of risk management in the regulated contracting environment of the Brazilian electrical sector. As in the new model the distribution utilities are obliged to ensure energy contracting to supply their whole markets, these companies became exposed to volume risks related to the demand uncertainties. So the new model following similar directives from the first phase developed management tools to mitigate the new risks mentioned above. As in a well structured market it is expected that the risks should be evenly shared or that risk management tools should be provided for all, this work intended to analyze the dynamics of the designed mechanisms and their impacts over the regulated market. In this work the risks of the electricity markets are studied and the management tools devised for the Brazilian market are identified. Finally for understanding the dynamics a thorough analysis of the auctions, of the mechanism for compensation of surplus and deficits and tariffs are carried on. The results show that the management tools were regularly employed by distribution companies, but the risks were merely transferred to the captive customers leading to distortions and asymmetries that conflict with the basis that guided the second phase of the reform. The work proposes remedial actions to mitigate the observed impacts and to provide risk management tools to the captive customer. (author)

  19. 30 CFR 75.508 - Map of electrical system.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Map of electrical system. 75.508 Section 75.508... MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Electrical Equipment-General § 75.508 Map of electrical system. The location and the electrical rating of all stationary electric apparatus in connection...

  20. Perspectives for rural electrification in the new economic and institutional scenario of the brazilian electric sector; Perspectivas para a eletrificacao rural no novo cenario economico-institucional do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luciana Correa de

    2001-03-15

    This thesis discusses the energy deficit in Brazilian rural areas, from the viewpoint of the ongoing reform, which is establishing a new economic and institutional model for the electric sector. The main objective of this inquiry is to reveal the perspectives for the solution of the rural energy problem, by means of a critical examination of the legal and executive initiatives related to the expansion of electric coverage, indicating the priority level of rural electrification within the reform. This analysis infers the need of an innovative reform approach, different from the solutions employed by developed countries, due to peculiar characteristics of the Brazilian case. (author)

  1. Restructured electric power systems analysis of electricity markets with equilibrium models

    CERN Document Server

    2010-01-01

    Electricity market deregulation is driving the power energy production from a monopolistic structure into a competitive market environment. The development of electricity markets has necessitated the need to analyze market behavior and power. Restructured Electric Power Systems reviews the latest developments in electricity market equilibrium models and discusses the application of such models in the practical analysis and assessment of electricity markets.

  2. 14 CFR 29.1363 - Electrical system tests.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Electrical system tests. 29.1363 Section 29... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Equipment Electrical Systems and Equipment § 29.1363 Electrical system tests. (a) When laboratory tests of the electrical system are conducted— (1) The tests...

  3. 14 CFR 25.1363 - Electrical system tests.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Electrical system tests. 25.1363 Section 25... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Equipment Electrical Systems and Equipment § 25.1363 Electrical system tests. (a) When laboratory tests of the electrical system are conducted— (1) The tests...

  4. 14 CFR 23.1359 - Electrical system fire protection.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Electrical system fire protection. 23.1359... Electrical Systems and Equipment § 23.1359 Electrical system fire protection. (a) Each component of the electrical system must meet the applicable fire protection requirements of §§ 23.863 and 23.1182....

  5. Operation planning studies for the integration of the 60 Hz Itaipu units in the Brazilian interconnected system

    Energy Technology Data Exchange (ETDEWEB)

    Chipp, H.J.; Oliveira, J.C.C. [ELETROBRAS, Rio de Janeiro, RJ (Brazil); Correa, L.R.A. [FURNAS, Rio de Janeiro, RJ (Brazil); Mendonca, W.C.; Marchi, R.D. [Itaipu Binacional, Foz do Iguacu, PR (Brazil); Botelho, M.J. [ELETROSUL, Curitiba, PR (Brazil)

    1987-12-31

    This paper describes the operation planning studies necessary to interconnect the first two 60 Hz generator units of the Itaipu power plant to the Brazilian interconnected system. The criteria, main problems identified and operative solutions encountered are presented in this paper. 10 refs., 4 figs., 5 tabs.

  6. The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah

    NARCIS (Netherlands)

    Carvalho, M.T.M.

    2015-01-01

    Abstract Keywords: tropical Savannah, biochar, soil fertility, aerobic rice, grain yield, N2O emission Márcia Thaís de Melo Carvalho (2015). The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah. PhD thesis, Wageningen Univers

  7. Implementation of optimum solar electricity generating system

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Balbir Singh Mahinder, E-mail: balbir@petronas.com.my; Karim, Samsul Ariffin A., E-mail: samsul-ariffin@petronas.com.my [Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS, 31750 Bandar Seri Iskandar, Perak (Malaysia); Sivapalan, Subarna, E-mail: subarna-sivapalan@petronas.com.my [Department of Management and Humanities, Universiti Teknologi PETRONAS, 31750 Bandar Seri Iskandar, Perak (Malaysia); Najib, Nurul Syafiqah Mohd; Menon, Pradeep [Department of Electrical and Electronics Engineering, Universiti Teknologi PETRONAS, 31750 Bandar Seri Iskandar, Perak (Malaysia)

    2014-10-24

    Under the 10{sup th} Malaysian Plan, the government is expecting the renewable energy to contribute approximately 5.5% to the total electricity generation by the year 2015, which amounts to 98MW. One of the initiatives to ensure that the target is achievable was to establish the Sustainable Energy Development Authority of Malaysia. SEDA is given the authority to administer and manage the implementation of the feed-in tariff (FiT) mechanism which is mandated under the Renewable Energy Act 2011. The move to establish SEDA is commendable and the FiT seems to be attractive but there is a need to create awareness on the implementation of the solar electricity generating system (SEGS). In Malaysia, harnessing technologies related to solar energy resources have great potential for implementation. However, the main issue that plagues the implementation of SEGS is the intermittent nature of this source of energy. The availability of sunlight is during the day time, and there is a need for electrical energy storage system, so that there is electricity available during the night time as well. The meteorological condition such as clouds, haze and pollution affects the SEGS as well. The PV based SEGS is seems to be promising electricity generating system that can contribute towards achieving the 5.5% target and will be able to minimize the negative effects of utilizing fossil fuels for electricity generation on the environment. Malaysia is committed to Kyoto Protocol, which emphasizes on fighting global warming by achieving stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system. In this paper, the technical aspects of the implementation of optimum SEGS is discussed, especially pertaining to the positioning of the PV panels.

  8. Implementation of optimum solar electricity generating system

    Science.gov (United States)

    Singh, Balbir Singh Mahinder; Sivapalan, Subarna; Najib, Nurul Syafiqah Mohd; Menon, Pradeep; Karim, Samsul Ariffin A.

    2014-10-01

    Under the 10th Malaysian Plan, the government is expecting the renewable energy to contribute approximately 5.5% to the total electricity generation by the year 2015, which amounts to 98MW. One of the initiatives to ensure that the target is achievable was to establish the Sustainable Energy Development Authority of Malaysia. SEDA is given the authority to administer and manage the implementation of the feed-in tariff (FiT) mechanism which is mandated under the Renewable Energy Act 2011. The move to establish SEDA is commendable and the FiT seems to be attractive but there is a need to create awareness on the implementation of the solar electricity generating system (SEGS). In Malaysia, harnessing technologies related to solar energy resources have great potential for implementation. However, the main issue that plagues the implementation of SEGS is the intermittent nature of this source of energy. The availability of sunlight is during the day time, and there is a need for electrical energy storage system, so that there is electricity available during the night time as well. The meteorological condition such as clouds, haze and pollution affects the SEGS as well. The PV based SEGS is seems to be promising electricity generating system that can contribute towards achieving the 5.5% target and will be able to minimize the negative effects of utilizing fossil fuels for electricity generation on the environment. Malaysia is committed to Kyoto Protocol, which emphasizes on fighting global warming by achieving stabilization of greenhouse gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system. In this paper, the technical aspects of the implementation of optimum SEGS is discussed, especially pertaining to the positioning of the PV panels.

  9. The Double-entry Bookkeeping Committee of 1914 and the Brazilian Public Accounting System

    Directory of Open Access Journals (Sweden)

    Tiago Villac Adde

    2014-12-01

    Full Text Available The history of Brazilian accounting has not been explored at length. Through a historical survey, this article presents the history of the Double-entry Bookkeeping Committee of 1914. After the Proclamation of the Republic was announced in 1889, the government started to expand its administrative bodies, necessitating the introduction of a bureaucracy able to perform new functions. In the same period, Brazil experienced a strong economic development with the development of its coffee industry. In 1905, under the leadership of Carlos de Carvalho, São Paulo State Treasury bookkeeping tasks were introduced under a double-entry bookkeeping system and through accrual and financial accounting. Double-entry bookkeeping practices in the federal public accounting system, although enshrined in law since 1808, were only fully realized after the creation of the Double-entry Bookkeeping Committee in 1914. In that same year, due to the negotiation of a second funding loan, English creditor bank auditors requested a balance of the National Treasury from the Minister of Finance Rivadávia Corrêa. Because the balance had not been prepared in eight years, the Double-entry Bookkeeping Committee was established in June of 1914, and this body completed a technical audit of Revenues and Expenditures. The committee also conducted the state administration's first Asset and Liability audit since the colonial era. The Double-entry Bookkeeping Committee of 1914 spearheaded changes to the Brazilian public accounting system, including the creation of the Public Accounting Code in 1922 and the approval of Central Accounting Office of the Republic regulation in 1924, strengthening and ascribing perpetuity to practices adopted after 1914.

  10. Indirect and direct costs of treating patients with ankylosing spondylitis in the Brazilian public health system

    Directory of Open Access Journals (Sweden)

    Valderilio Feijó Azevedo

    2016-04-01

    Full Text Available ABSTRACT Introduction: Patients with Ankylosing Spondylitis (AS require a team approach from multiple professionals, various treatment modalities for continuous periods of time, and can lead to the loss of labour capacity in a young population. So, it is necessary to measure its socio-economic impact. Objectives: To describe the use of public resources to treat AS in a tertiary hospital after the use of biological medications was approved for treating spondyloarthritis in the Health Public System, establishing approximate values for the direct and indirect costs of treating this illness in Brazil. Material and methods: 93 patients selected from the ambulatory spondyloarthritis clinic at the Hospital de Clínicas of the Federal University of Paraná between September 2011 and September 2012 had their direct costs indirect treatment costs estimation. Results: 70 patients (75.28% were male and 23 (24.72% female. The mean age was 43.95 years. The disease duration was calculated based on the age of diagnosis and the mean was 8.92 years (standard deviation: 7.32; 63.44% were using anti-TNF drugs. Comparing male and female patients the mean BASDAI was 4.64 and 5.49 while the mean BASFI was 5.03 and 6.35 respectively. Conclusions: The Brazilian public health system's spending related to ankylosing spondylitis has increased in recent years. An important part of these costs is due to the introduction of new, more expensive health technologies, as in the case of nuclear magnetic resonance and, mainly, the incorporation of anti-TNF therapy into the therapeutic arsenal. The mean annual direct and indirect cost to the Brazilian public health system to treat a patient with ankylosing spondylitis, according to our findings, is US$ 23,183.56.

  11. Transient phenomena in electrical power systems

    CERN Document Server

    Venikov, V A; Higinbotham, W

    1964-01-01

    Electronics and Instrumentation, Volume 24: Transient Phenomena in Electrical Power Systems presents the methods for calculating the stability and the transient behavior of systems with forced excitation control. This book provides information pertinent to the analysis of transient phenomena in electro-mechanical systems.Organized into five chapters, this volume begins with an overview of the principal requirements in an excitation system. This text then explains the electromagnetic and electro-mechanical phenomena, taking into account the mutual action between the components of the system. Ot

  12. Drivetrain system of an ultracapacitor electric bus

    Institute of Scientific and Technical Information of China (English)

    Kong Zhigu; Zhu Chunbo; Yang Shiyan; Cheng Shukang

    2007-01-01

    This paper proposed a design of the drivetrain system of an electric bus with ultracapacitor (UC) as the only on-board power source. The system includes three main parts, namely, UC bank, motor and the converter, vehicle management unit (VMU). Analyses results in detail on the functional design and experiments on work bench of each part were also presented, which validated the reliability of the system. Furthermore, driving results in field of the bus verified the feasibility of the design of the drivetrain system. The bus has very good dynamic performances and shows a promising applications prospect in the short and medium route buses system.

  13. International Benchmarking of Electricity Transmission System Operators

    DEFF Research Database (Denmark)

    Agrell, Per J.; Bogetoft, Peter

    2014-01-01

    Electricity transmission system operators (TSO) in Europe are increasing subject to high-powered performance-based regulation, such as revenue-cap regimes. The determination of the parameters in such regimes is challenging for national regulatory authorities (NRA), since there is normally a single...

  14. ENVIRONMENTAL MANAGEMENT OF ELECTRICAL ENERGY SYSTEMS: PROBLEMS AND PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Francisco José Costa Araujo

    2001-09-01

    Full Text Available

    En la pasada década, el modelo de desarrollo brasileño fue caracterizado por el crecimiento económico a través de una fuerte industrialización. Una de las principales estrategias del gobierno en ese período, consistió en proveer la necesaria infraestructura a la actividad industrial, principalmente en los sectores del transporte, telecomunicaciones y energía. Los sistemas de transmisión tuvieron una parte fundamental en ese proceso, como elementos distribuidores de electricidad para la atención de necesidades de la industria y la urbanización. Atenuar los eventuales efectos medioambientales y sociales negativos de empresas del sector eléctrico, constituye ahora algo concerniente al gobierno, como lo indica la demanda legal de la evaluación del impacto medioambiental (EIM para el cumplimiento de este tipo de actividad.

    Abstract

    In the last decades, the model of brazilian development was characterized by the economic growth through a fast industrialization. One of the main government strategies, in that period, consisted on the supply of necessary infrastructure to the industrial activity, mainly in the transport sections, telecommunication and energy. The transmission systems had a fundamental part in that process, as elements distributors of electricity for the attending to the needs of the industry and the urbanization. The attenuation of the eventual environmental effects and social negatives of enterprises of the electric section are constituted, now, in a government concern, as it indicates the legal demand of the environmental impact assessment (EIA for the accomplishment of this type activity

  15. Martial arts, professional education and the apprenticeship system: Documentary analysis of Brazilian judo

    Directory of Open Access Journals (Sweden)

    A.J. Drigo

    2011-01-01

    Full Text Available The aim of this research was to describe the process of professional education of judo coaches in Brazil. In order to do this, documental sources were used as means of data collection. Results showed that highly regarded institutions such as Confederação Brasileira de Judô, Federação Paulista de Judô, and Liga Paulista de Judô all support educational structures that resembles the apprenticeship system, that is, education which provide mostly employment-preparation skills for trained labour, in detriment of education on the application of scientific principles aiming at improving sporting performance. In conclusion, Brazilian judo seems to be kept away from the academic formation model and linked to the know how to do traditions.

  16. The underestimated role of universities for the Brazilian system of innovation

    Directory of Open Access Journals (Sweden)

    Wilson Suzigan

    2011-03-01

    Full Text Available Conventional wisdom usually underestimates the important role of public research institutes and universities in successful cases of Brazilian economy. History of science and technology institutions shows a long-term process of formation of these institutions and their interactions with industrial firms, agricultural producers or society. This paper investigates historical roots of successful cases of Brazil. First, we present the late onset of National Innovation System (NSI institutions and waves of institutional formation in Brazil. Second, we describe the history of three selected successful cases, which spans from a low-tech sector (agriculture, a medium-tech sector (steel and special metal alloys, to a high-tech sector (aircraft. These findings present new challenges for present-day developmental policies.

  17. 77 FR 39857 - Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of...

    Science.gov (United States)

    2012-07-05

    ... Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of Procedure...; ] DEPARTMENT OF ENERGY Federal Energy Regulatory Commission 18 CFR Part 40 Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of Procedure AGENCY: Federal Energy...

  18. 78 FR 29209 - Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of...

    Science.gov (United States)

    2013-05-17

    ... to Electric Reliability Organization Definition of Bulk Electric System and Rules of Procedure; Final...; ] DEPARTMENT OF ENERGY Federal Energy Regulatory Commission 18 CFR Part 40 Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of Procedure AGENCY: Federal Energy...

  19. Extension planning for electrical energy supply systems

    International Nuclear Information System (INIS)

    In the future as well as in the past, and in particular in the next decade a considerable increase in electrical energy demand can be expected. To satisfy this demand in a reliable and sufficient manner will force the utilities to invest large sums of money for the operation and the extension of power generation and distribution plants. The size of these investments justifies the search for more and more comprehensive and at the same time more detailed planning methods. With the help of system analysis a planning model for the electricity supply industry of a major supply area will be designed. (orig./RW)

  20. Electric Field Quantitative Measurement System and Method

    Science.gov (United States)

    Generazio, Edward R. (Inventor)

    2016-01-01

    A method and system are provided for making a quantitative measurement of an electric field. A plurality of antennas separated from one another by known distances are arrayed in a region that extends in at least one dimension. A voltage difference between at least one selected pair of antennas is measured. Each voltage difference is divided by the known distance associated with the selected pair of antennas corresponding thereto to generate a resulting quantity. The plurality of resulting quantities defined over the region quantitatively describe an electric field therein.

  1. Advances in communication systems and electrical engineering

    CERN Document Server

    Huang, Xu

    2008-01-01

    This volume contains contributions from participants in the 2007 International Multiconference of Engineers and Computer Scientists Topics covered include communications theory, communications protocols, network management, wireless networks, telecommunication, electronics, power engineering, control engineering, signal processing, and industrial applications. The book will offer the states of arts of tremendous advances in communication systems and electrical engineering and also serve as an excellent reference work for researchers and graduate students working with/on communication systems a

  2. Performance indicators proposal for the government electric power distribution facilities in the Brazilian electric sector; Proposta de indicadores de desempenho as distribuidoras de energia federalizadas do setor eletrico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Carregaro, Jose Carlos

    2003-07-01

    In this dissertation a set of indicators is proposed to the Centrais Eletricas Brasileiras S/A - ELETROBRAS, allowing the holding companies to attain the top position in the market, and a global vision of their performance. The methodology applied the definition of the performance indicators and the context, existing studies, and the indicators used by the Brazilian electric sector. It is expected that the proposed set of indicators be used by ELETROBRAS for a better planning and a more objective control of the holding companies performance, as well as an analysis of their administration strong and weak aspects.

  3. Long-term impacts of battery electric vehicles on the German electricity system

    Science.gov (United States)

    Heinrichs, H. U.; Jochem, P.

    2016-05-01

    The emerging market for electric vehicles gives rise to an additional electricity demand. This new electricity demand will affect the electricity system. For quantifying those impacts a model-based approach, which covers long-term time horizons is necessary in order to consider the long lasting investment paths in electricity systems and the market development of electric mobility. Therefore, we apply a bottom-up electricity system model showing a detailed spatial resolution for different development paths of electric mobility in Germany until 2030. This model is based on a linear optimization which minimizes the discounted costs of the electricity system. We observe an increase of electricity exchange between countries and electricity generated by renewable energy sources. One major result turns out to be that electric vehicles can be integrated in the electricity system without increasing the system costs when a controlled (postponing) charging strategy for electric vehicles is applied. The impact on the power plant portfolio is insignificant. Another important side effect of electric vehicles is their substantial contribution to decreasing CO2 emissions of the German transport sector. Hence, electric mobility might be an integral part of a sustainable energy system of tomorrow.

  4. System for measuring electric resistance skin

    Directory of Open Access Journals (Sweden)

    V. P. Kutsenko

    2015-09-01

    Full Text Available Introduction. To measure the electrical resistance of leather frequently used system for applying testing signals from external current sources or voltage. Power testing signals the maximum limit, when they Electro studies still have a negative impact on the human body. Formulation of the problem. To achieve this task the authors conducted research and developed a system, which is based to measure electrical skin resistance (ESR responsible allocation and measurement noise variance bioelectric signal is proportional to the resistance area of research. Main body. The paper studied and developed a system, based on measuring electrical skin resistance on the identification and measurement of the noise variance from the BAP bioelectric signal that is proportional to the resistance of the investigation. A functional block diagram of an automated algorithm for converting the useful and noise signal BAP, whose range does not differ fundamentally from those of the intrinsic noise of the input elements in ESR. The proposed method will improve the accuracy of the measurements ESR without the use of test pacing signal. The simulation results and experimental studies correlate that confirms the adequacy of this method the results of experimental measurements. Conclusions. For noise voltage BAT can measure their electrical resistance without signals tested, external sources of electric current or voltage and thereby completely eliminate the harmful effect of probing. Thanks to one of the Inverting periodic noise voltages multiplied and simultaneous detection variable component switching frequency, provided the allocation and measurement noise voltage acupuncture points, which is proportional to the resistance, and the intensity of the same order or less than the intrinsic noise of the measuring system. Use as medical acupuncture needle electrodes allows to measure not only the skin but also deep resistivity, which reflects the physiological state of internal

  5. Solar/electric heating systems for the future energy system

    Energy Technology Data Exchange (ETDEWEB)

    Furbo, S.; Dannemand, M.; Perers, B. [and others

    2013-05-15

    The aim of the project is to elucidate how individual heating units for single family houses are best designed in order to fit into the future energy system. The units are based on solar energy, electrical heating elements/heat pump, advanced heat storage tanks and advanced control systems. Heat is produced by solar collectors in sunny periods and by electrical heating elements/heat pump. The electrical heating elements/heat pump will be in operation in periods where the heat demand cannot be covered by solar energy. The aim is to use the auxiliary heating units when the electricity price is low, e.g. due to large electricity production by wind turbines. The unit is equipped with an advanced control system where the control of the auxiliary heating is based on forecasts of the electricity price, the heat demand and the solar energy production. Consequently, the control is based on weather forecasts. Three differently designed heating units are tested in a laboratory test facility. The systems are compared on the basis of: 1) energy consumption for the auxiliary heating; 2) energy cost for the auxiliary heating; 3) net utilized solar energy. Starting from a normal house a solar combi system (for hot water and house heating) can save 20-30% energy cost, alone, depending on sizing of collector area and storage volume. By replacing the heat storage with a smart tank based on electric heating elements and a smart control based on weather/load forecast and electricity price information 24 hours ahead, another 30-40% can be saved. That is: A solar heating system with a solar collector area of about 10 m{sup 2}, a smart tank based on electric heating element and a smart control system, can reduce the energy costs of the house by at least 50%. No increase of heat storage volume is needed to utilize the smart control. The savings in % are similar for different levels of building insulation. As expected a heat pump in the system can further reduce the auxiliary electricity

  6. Brazilian experience in electricity auctions: Comparing outcomes from new and old energy auctions as well as the application of the hybrid Anglo-Dutch design

    International Nuclear Information System (INIS)

    Since 2004, the Government of Brazil (GoB) has acted as an intermediary between distribution and generator companies in the energy procurement sector. The GoB procures energy from generator companies through auctions of long-term energy contracts. After an auction, the winning generator companies sign contracts directly with distribution companies. In particular, the GoB runs two different auctions: one for energy from existing power plants (i.e., old energy) and another for energy from power plants that have not yet been built (i.e., new energy). This paper describes these auctions and compares the outcomes from the old and new energy auctions from 2004 to 2010 using final auction prices. The Brazilian case is particularly interesting, not only because energy is predominantly supplied by hydropower plants but also because new energy auctions reach prices below those for old energy. Therefore, it is likely that it is not necessary to run the two different energy auctions. As a secondary objective, this article analyze whether the Anglo-Dutch hybrid auction model is a better design for electricity procurement in Brazil. - Highlights: ► We analyze the outcomes from the Brazilian old and new energy auctions. ► We evaluate the Anglo-Dutch auction design. ► Outcomes from both kind of auctions reveal that the prices are statistically similar. ► One kind of auction increase competition and minimize Eletrobras' market power

  7. The Brazilian electric sector regulation as reference for the hydrogen regulation as energetic vector; A regulacao do setor eletrico brasileiro como referencia para regulacao do hidrogenio como vetor energetico

    Energy Technology Data Exchange (ETDEWEB)

    Paternostro, Andre de Goes [Universidade Salvador (UNIFACS), Salvador, BA (Brazil); Fundacao de Amparo a Pesquisa do Estado da Bahia (FAPSB), Salvador, BA (Brazil)]. E-mail: apater@hotmail.com

    2008-07-01

    This paper is based on the Brazilian electric sector to outline parallels for introduction of hydrogen as energetic vector in Brazilian matrix. For this purpose it was achieved an analysis of regulation theory, of electric sector reorganization, the new model of energy trade and the NOS role. In face of this analysis, hydrogen regulation may be established through a mix of four models: tariff model by return tax; tariff by marginal cost; regulation by performance and price cap. This new industrial sector should start vertical and with its maturity become non vertical as electric sector after its reorganization. Regarding the market, advanced purchase of hydrogen should be established enabling the reduction of incertitude in trade as well as reduction of implantation costs. NOS should pursue electric energy generation from hydrogen as this may carry impacts in transmission networks as well as in distribution network depending on how hydrogen was generated, whether in large scale or for local consumption supply. (author)

  8. 46 CFR 169.676 - Grounded electrical systems.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Grounded electrical systems. 169.676 Section 169.676... Machinery and Electrical Electrical Installations Operating at Potentials of 50 Volts Or More on Vessels of Less Than 100 Gross Tons § 169.676 Grounded electrical systems. (a) Except as provided in paragraph...

  9. Smart grids concept in electrical distribution system

    Directory of Open Access Journals (Sweden)

    Popović Željko N.

    2012-01-01

    Full Text Available This paper defines key business processes in electrical distribution systems and key elements and priority components that should be (redefined in these processes in order to enable the goals of smart grids concept to be fulfilled in the cost effective way. Activities undertaken in the Power Distribution Company of “Elektrovojvodina” (Serbia, which provide the basis for fulfilling the Smart Grids goals and thus enable full implementation of smart grids concept are presented in details.

  10. Expert consensus (SBC/SBHCI) on the use of drug-eluting stents: recommendations of the Brazilian society of interventional cardiology/ Brazilian society of cardiology for the Brazilian public single healthcare system.

    Science.gov (United States)

    Lima, Valter C; Mattos, Luiz Alberto P; Caramori, Paulo R A; Perin, Marco A; Mangione, José A; Machado, Bruno M; Coelho, Wilson M C; Bueno, Ronaldo R L

    2006-10-01

    The authors review percutaneous coronary intervention (PCI) evolution and its growing application in myocardial revascularization for patients with coronary heart disease in Brazil and worldwide. PCI was introduced in 1977 using only the catheter balloon. Limitations of this method (acute occlusion and coronary restenosis) led to the adoption of coronary stents and more recently the advent of drug-eluting stents2, which were developed to drastically reduce restenosis rates. These developments allowed the exponential growth of percutaneous coronary intervention (PCI) procedures in Brazil which have replaced many bypass surgery procedures and have become the gold standard for the majority of symptomatic patients suffering from coronary artery disease. The preference for this procedure gained new dimensions in 2000 when the Brazilian Public Healthcare System (SUS) began reimbursing for stent procedures. This measure exemplified the importance of the Public Healthcare System's participation in incorporating medical advances and offering a high standard of cardiovascular treatment to a large portion of the Brazilian population. It is emphasized that prevention of in-stent restenosis is complex due to its unpredictable and ubiquitous occurrence. Control of this condition improves quality of life and reduces the recurrence of angina pectoris, the need to perform new revascularization procedures and hospital readmissions. The overall success of the drug-eluting stents has proven to be reliable and consistent in overcoming restenosis and has some beneficial impact for all clinical and angiographic conditions. This paper discusses the adoption and criteria for the use of drug-eluting stents in other countries as well as the recommendations established by the Brazilian Society of Interventional Cardiology for their reimbursement by SUS. The incorporation of new healthcare technology involves two distinct stages. During the first stage, the product is registered with the

  11. 29 CFR 1910.302 - Electric utilization systems.

    Science.gov (United States)

    2010-07-01

    ... conductors of other circuits § 1910.308(f)—Solar photovoltaic systems (c) Applicability of requirements for... 29 Labor 5 2010-07-01 2010-07-01 false Electric utilization systems. 1910.302 Section 1910.302... Electrical Systems § 1910.302 Electric utilization systems. Sections 1910.302 through 1910.308 contain...

  12. The Brazilian Unified National Health System: Proposal of a Cost-effectiveness Evaluation Model

    Directory of Open Access Journals (Sweden)

    Lilian Ribeiro de Oliveira

    2016-04-01

    Full Text Available The Brazilian Unified National Health System (Sistema Único de Saúde [SUS] is in a prominent position compared to the existing social policies. One of the new tools used by SUS is known as Performance Index of the Unified Health System (Índice de Desempenho do Sistema Único de Saúde [IDSUS], which is intended to measure the performance of each municipality. Therefore, the aim of this study was to propose a model of cost-effectiveness to compare IDSUS performance against total revenues achieved in Homogeneous Group 2, consisting of 94 municipalities and analysed using data from IDSUS and the System Information of the Public Budget for Health Care (Sistema de Informação do Orçamento Público em Saúde [SIOPS] for the year 2011. After structuring this data, we carried out descriptive statistical and cluster analysis in order to group similar municipalities in accordance with established variables: IDSUS performance, population and total revenue in health per capita. Even with the division of municipalities into homogeneous groups and after using variables such as population and revenue to regroup them, the results showed there are municipalities with heterogeneous characteristics. Another finding is in the use and intersection of two distinct databases (IDSUS and SIOPS, which allowed for visualizing the impact of health care revenue on the municipalities performance.

  13. Demirjian's system for estimating the dental age of northeastern Brazilian children.

    Science.gov (United States)

    Maia, Maria Cristina Germano; Martins, Maria da Gloria Almeida; Germano, Francisco Alcides; Brandão Neto, Jose; da Silva, Carlos Antonio Bruno

    2010-07-15

    Since Demirjian's system of estimating dental maturity was first described, many researchers from different countries have tested its accuracy among diverse populations. Some of these studies have pointed out a need to determine population-specific standards. In Brazil, the Northeast region is the one that most suffers the negative impact of exodus, specially related to the increase of abandoned children in the cities. The aim of this study was to test the accuracy of Demirjian's system for assessing the dental maturity of northeastern Brazilian children, so as to present a scale for maturity score conversion into dental age developed specifically for this population. This could be used for forensic, anthropological and legal matters, and also as a model for other countries attempting to formulate their own conversion scales. Panoramic radiographs of 1,491 children (821 females and 670 males), aged 7 to 13 years, from Ceará state, northeast Brazil, were assessed by a single observer to determine dental age (DA) according to Demirjian's system. The mean percentage of intra-observer agreement was 86.6%, with a mean Cohen's Kappa coefficient of 0.67 (substantial agreement). The DA was compared by paired t-test to subjects' chronological age (CA). The differences between CA and DA in all age groups were statistically significant (psystem in this population, justified the determination of specific scores for dental maturity assessment.

  14. Power quality in electric distribution systems

    International Nuclear Information System (INIS)

    the power quality of the electric system is defined by the constant values of the voltage and frequency, the good value of the power factor close to unity, and balanced three phase voltages and currents. capacitors are widely installed in distribution systems for reactive power compensation to achieve power and energy loss reduction, voltage regulation and system capacity release. the extent of these benefits depends greatly on low the capacitors are placed on the system . the problem of how to place capacitors on the system such that these benefits are achieved and / or maximized against the cost associated with the capacitor placement is termed the general capacitor placement problem.the presented mathematical model has been developed to determine the size, number, and location of fixed capacitor banks that will maximize the saving derived from reduction in peak power and energy loss, and that will minimize the capital and installation costs of capacitors

  15. The electric power engineering handbook power systems

    CERN Document Server

    2012-01-01

    Power Systems, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) covers all aspects of power system protection, dynamics, stability, operation, and control. Under the editorial guidance of L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Andrew Hanson, Pritindra Chowdhuri, Gerry Sheble, and Mark Nelms, this carefully crafted reference includes substantial new and revised contributions from worldwide leaders in the field. This content provides convenient access to overviews and detailed information on a diverse arr

  16. Mortality due to diseases of the circulatory system among the elderly population in Brazilian Amazon: temporal and spatial analysis

    Directory of Open Access Journals (Sweden)

    Karine Vila Real Nunes

    2013-12-01

    Full Text Available INTRODUCTION: Circulatory Diseases (CD are the major cause of death among the elderly population in Brazilian Amazon. OBJECTIVE: to analyze standardized mortality rates of diseases of the circulatory system (DCS, according to the main causes of death among the elderly, in microregions of the Brazilian Amazon, in the period of 1998 - 2007. METHODS: ecological study of mortality rates distribution standardized by CD and corrected by deaths from poorly defined causes among the elderly (> 65 years of age who lived in Brazilian Amazon in the period of 1998 - 2007. The analysis were carried out by the linear regression, trend, and spatial distribution of Kernel. RESULTS: We verified an increasing trend in mortality by CD (β1 = 28.34 p = 0.01, due to the increasing trend in the States of Maranhão and Tocantins. The central region of Mato Grosso, Northern Tocantins, Eastern Pará and Southwestern Maranhão present hot spots with the highest mortality rates. Males present higher rates when compared to females all over the region; rates of mortality due to acute myocardial infarction and hypertensive disease present the same spatial standard of the CD group and the rates of cerebrovascular diseases present a different spatial distribution standard. Increment in mortality rates according to age was observed: the greater the age, the higher is mortality by CD. CONCLUSION: The Brazilian Amazon presents an increasing trend with high rates of mortality by the circulatory diseases, and the geographic areas with the highest rates are around the Brazilian Amazon, in the states of Tocantins, Maranhão and Mato Grosso.

  17. Stability analysis of large electric power systems

    Energy Technology Data Exchange (ETDEWEB)

    Elwood, D.M.

    1993-01-01

    Modern electric power systems are large and complicated, and, in many regions of the world, the generation and transmission systems are operating near their limits. Ensuring the reliable operation of the power system requires engineers to study the response of the system to various disturbances. The responses to large disturbances are examined by numerically solving the nonlinear differential-algebraic equations describing the power system. The response to small disturbances is typically studied via eigenanalysis. The Electric Power Research Institute (EPRI) recently developed the Extended Transient/Mid-term Stability Program (ETMSP) to study large disturbance stability and the Small Signal Stability Program Package (SSSP) to study small signal stability. The primary objectives of the work described in this report were to (1) explore ways of speeding up ETMSP, especially on mid-term voltage stability problems, (2) explore ways of speeding up the Multi-Area Small-Signal Stability program (MASS), one of the codes in SSSP, and (3) explore ways of increasing the size of problem that can be solved by the Cray version of MASS.

  18. FreedomCAR :electrical energy storage system abuse test manual for electric and hybrid electric vehicle applications.

    Energy Technology Data Exchange (ETDEWEB)

    Doughty, Daniel Harvey; Crafts, Chris C.

    2006-08-01

    This manual defines a complete body of abuse tests intended to simulate actual use and abuse conditions that may be beyond the normal safe operating limits experienced by electrical energy storage systems used in electric and hybrid electric vehicles. The tests are designed to provide a common framework for abuse testing various electrical energy storage systems used in both electric and hybrid electric vehicle applications. The manual incorporates improvements and refinements to test descriptions presented in the Society of Automotive Engineers Recommended Practice SAE J2464 ''Electric Vehicle Battery Abuse Testing'' including adaptations to abuse tests to address hybrid electric vehicle applications and other energy storage technologies (i.e., capacitors). These (possibly destructive) tests may be used as needed to determine the response of a given electrical energy storage system design under specifically defined abuse conditions. This manual does not provide acceptance criteria as a result of the testing, but rather provides results that are accurate and fair and, consequently, comparable to results from abuse tests on other similar systems. The tests described are intended for abuse testing any electrical energy storage system designed for use in electric or hybrid electric vehicle applications whether it is composed of batteries, capacitors, or a combination of the two.

  19. Batteries charging systems for electric and plug-in hybrid electric vehicles

    OpenAIRE

    Monteiro, Vítor; Gonçalves, Henrique; João C. Ferreira; Afonso, João L.

    2012-01-01

    Many countries have a large dependence on imported fossil fuels whose prices increase almost every day. Knowing that much of this consumption is for transportation systems, it becomes essential to seek for alternatives. The natural bet is the electric mobility, namely through Electric Vehicles (EVs) and Plug-in Hybrid Electric Vehicles (PHEVs). However, the wide spread utilization of these vehicles has consequences on the electrical power grid, mainly in terms of load management and electric ...

  20. Loss reduction in industrial motor systems: the structure of the Brazilian program structure focusing the autosustainability (optimization of industrial motor systems); Reducao de perdas em sistemas motrizes industriais: a estrutura do programa brasileiro com foco na autosustentabilidade (otimizacao de sistemas motrizes industriais)

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Vanda Alves dos; Soares, George Alves; Perrone, Fernando Pinto Dias; Ferreira, Carlos Aparecido; Oliveira, Humberto Luiz de; Motta, Braulio Romano; Silva, Humberto Reis Braga da [ELETROBRAS, Rio de Janeiro, RJ (Brazil). Dept. de Desenvolvimento de Projetos Especiais. Div. de Projetos Setoriais de Eficiencia Energetica]. E-mails: vandaas@eletrobras.com; georgesoares@eletrobras.com; carlosaparecido@eletrobras.com; humberto.oliveira@eletrobras.com; brauliorm@eletrobras.com; hhbraga@eletrobras.com

    2006-07-01

    This paper presents the achievements and goals of the Industrial Motor System Optimization Project as developed by the PROCEL INDUSTRIA -Brazilian Energy Efficiency Industrial Program, within the scope of PROCEL - National Program for Electric Power Conservation, carried out ELETROBRAS since 1985. Its main objective is to minimize losses in the motor driven systems already installed in the Brazilian industry. In order to implement this program, ELETROBRAS is continuous making agreements with the state industry federations aiming to develop mechanisms and to manage energy efficiency implementation projects looking forward its self supporting. PROCEL INDUSTRIA aims to reduce the waste of electric energy in the industrial sector, to increase the industries competition, by reducing their costs and to contribute to the preservation and cleanness of environment. (author)

  1. Near-surface gravity actuated pipe (GAP{sup TM}) system for Brazilian deepwater fluid transfer

    Energy Technology Data Exchange (ETDEWEB)

    Fromage, Lionel; Brown, Paul A. [SBM Offshore (Monaco)

    2009-12-19

    The recent discovery of new deep water and ultra-deep water oil and gas fields offshore Brazil, including pre-salt reservoirs, has become a focal point for field development Operators and Contractors. The aggressive nature of fluids (sour, high density) in combination with deeper waters implies potential flow assurance issues. These issues challenge riser and pipeline technology to find cost effective solutions for hydrocarbon fluid transfer in field development scenarios involving phased tied-back. The near-surface GAP{sup TM}, system (Gravity Actuated Pipe{sup TM}), which has been in operation for more than two years on the Kikeh field offshore Malaysia in 1325 m of water between a Dry Tree Unit (SPAR) and a turret-moored FPSO, is considered to meet these challenges since such a product is quasi independent of water depth and takes advantage of being near surface to optimize flow assurance. Furthermore the GAP{sup TM} has undergone technical upgrades when compared to the Kikeh project in order to make it suitable for the more hostile met ocean conditions offshore Brazil. This paper presents the design features, the construction and assembly plans in Brazil and the offshore installation of a GAP fluid transfer system for operation in Brazilian deep waters. (author)

  2. Development and evaluation of emulsifying systems of the material grease from Brazilian flora

    Directory of Open Access Journals (Sweden)

    Douglas Dourado

    2015-10-01

    Full Text Available Context: Oils and butter of seed from Brazilian biodiversity are extending the range of innovative products for cosmetics development. They have a fat potential similar to skin composition, leading to the improved performance of these product. Aims: Improve the emulsions spreadability through prior screening of grease composition and studying the viscosity, and the emulsions accelerated stability. Methods: Emulsions were formulated using oils from semiarid plants from Bahia: Syagrus coronate, Pachira retusa, and Pachira aquatica, so as to compare them with oils already standard in the production of cosmetics. Spreadability and stability tests were made comparing the results. The same criteria were used with Amazon seed butter: Virola surinamensis, Butyrospermum parkii, Astrocaryum murumuru, Theobroma cacao and Theobroma grandiflorum. For the emulsions screening and performance, a system was developed for oil/ butter, following tests of accelerated stability, viscosity, and spreadability. Results: The combined system of spreadability was optimized using screening. Emollients containing oleic and palmitic acids, and light chain fatty acids obtained good spreadability. The oil emulsion containing Pachira retusa and Virola surinamensis butter had a higher viscosity. Conclusions: With high content of fatty acids such as oleic, palmitic or the light chain fatty acids obtain an appropriated appearance, texture, and spreadability for cosmetic use. Thus, oils with a low fatty acid content may be combined with butter that have a high fatty acid content and vice-versa. Analyzing and strategically combining grease composition, one can optimize the performance of cosmetic formulations.

  3. Morpho-anatomical features of underground systems in six Asteraceae species from the Brazilian Cerrado

    Directory of Open Access Journals (Sweden)

    Beatriz Appezzato-da-Glória

    2011-09-01

    Full Text Available In the Brazilian Cerrado (neotropical savanna, the development of bud-bearing underground systems as adaptive structures to fire and dry periods can comprise an important source of buds for this ecosystem, as already demonstrated in the Brazilian Campos grasslands and North American prairies. Asteraceae species from both woody and herbaceous strata have subterranean organs that accumulate carbohydrates, reinforcing the adaptive strategy of these plants to different environmental conditions. This study aims to analyse the morpho-anatomy of underground systems of six species of Asteraceae (Mikania cordifolia L.f. Willd., Mikania sessilifolia DC, Trixis nobilis (Vell. Katinas, Pterocaulon alopecuroides (Lam. DC., Vernonia elegans Gardner and Vernonia megapotamica Spreng., to describe these structures and to verify the occurrence and origin of shoot buds, and to analyse the presence of reserve substances. Individuals sampled in Cerrado areas in São Paulo State showed thick underground bud-bearing organs, with adventitious or lateral roots and presence of fructans. Xylopodium was found in all studied species, except for Trixis nobilis, which had stem tuber. The presence of fructans as reserve, and the capacity of structures in the formation of buds indicate the potential of herbaceous species of Asteraceae in forming a viable bud bank for vegetation regeneration in the Brazilian Cerrado.No Cerrado brasileiro (savana neotropical, o desenvolvimento de sistemas subterrâneos que produzem gemas, como estruturas adaptativas contra o fogo e períodos de seca, pode compreender um importante suprimento de gemas para esse ecossistema, como já demonstrado nos campos brasileiros e nas pradarias norte-americanas. Espécies de Asteraceae tanto do estrato lenhoso, quanto do herbáceo têm órgãos que acumulam carboidratos, reforçando a estratégia adaptativa dessas plantas a diferentes condições ambientais. Este estudo tem o objetivo de analisar a morfo

  4. PCA Fault Feature Extraction in Complex Electric Power Systems

    OpenAIRE

    ZHANG, J.; Z. Wang; Zhang, Y.; J. MA

    2010-01-01

    Electric power system is one of the most complex artificial systems in the world. The complexity is determined by its characteristics about constitution, configuration, operation, organization, etc. The fault in electric power system cannot be completely avoided. When electric power system operates from normal state to failure or abnormal, its electric quantities (current, voltage and angles, etc.) may change significantly. Our researches indicate that the variable with the biggest coeffic...

  5. 76 FR 16263 - Revision to Electric Reliability Organization Definition of Bulk Electric System

    Science.gov (United States)

    2011-03-23

    ... Organization Definition of Bulk Electric System, Order No. 743, 75 FR 72910 (Nov. 26, 2010), 133 FERC ] 61,150... Energy Regulatory Commission 18 CFR Part 40 Revision to Electric Reliability Organization Definition of Bulk Electric System AGENCY: Federal Energy Regulatory Commission, DOE. ACTION: Order on...

  6. Instrumented hip implants: electric supply systems.

    Science.gov (United States)

    Soares dos Santos, Marco P; Ferreira, Jorge A F; Ramos, A; Simões, José A O; Morais, Raul; Silva, Nuno M; Santos, Paulo M; Reis, M J C S; Oliveira, T

    2013-10-18

    Instrumented hip implants were proposed as a method to monitor and predict the biomechanical and thermal environment surrounding such implants. Nowadays, they are being developed as active implants with the ability to prevent failures by loosening. The generation of electric energy to power active mechanisms of instrumented hip implants remains a question. Instrumented implants cannot be implemented without effective electric power systems. This paper surveys the power supply systems of seventeen implant architectures already implanted in-vivo, namely from instrumented hip joint replacements and instrumented fracture stabilizers. Only inductive power links and batteries were used in-vivo to power the implants. The energy harvesting systems, which were already designed to power instrumented hip implants, were also analyzed focusing their potential to overcome the disadvantages of both inductive-based and battery-based power supply systems. From comparative and critical analyses of the methods to power instrumented implants, one can conclude that: inductive powering and batteries constrain the full operation of instrumented implants; motion-driven electromagnetic energy harvesting is a promising method to power instrumented passive and active hip implants. PMID:24050511

  7. Factors associated with tuberculosis by HIV status in the Brazilian national surveillance system: a cross sectional study

    OpenAIRE

    do Prado, Thiago Nascimento; Miranda, Angélica Espinosa; de Souza, Fernanda Mattos; dos Santos Dias, Elias; Sousa, Lorena Kellen Fernandes; Arakaki-Sanchez, Denise; Sanchez, Mauro N.; Golub, Jonathan E.; Maciel, Ethel Leonor

    2014-01-01

    Background Over the last decade tuberculosis (TB) incidence and mortality in Brazil have been steadily declining. However, this downward trend has not been observed among HIV-infected patients. We describe the epidemiological and clinical profile of TB patients by HIV status using the Brazilian National Surveillance System. Methods All TB diagnoses with HIV status information between January 1, 2007 and December 31, 2011 were categorized as either HIV or non-HIV at time of TB diagnosis. Co-in...

  8. 33 CFR 127.107 - Electrical power systems.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Electrical power systems. 127.107... Waterfront Facilities Handling Liquefied Natural Gas § 127.107 Electrical power systems. (a) The electrical... source does not affect the capability of the other source. The system must meet the National...

  9. 46 CFR 28.360 - Electrical distribution systems.

    Science.gov (United States)

    2010-10-01

    ... Operate With More Than 16 Individuals on Board § 28.360 Electrical distribution systems. (a) Each electrical distribution system which has a neutral bus or conductor must have the neutral bus or conductor... 46 Shipping 1 2010-10-01 2010-10-01 false Electrical distribution systems. 28.360 Section...

  10. 46 CFR 28.855 - Electrical distribution systems.

    Science.gov (United States)

    2010-10-01

    ... FISHING INDUSTRY VESSELS Aleutian Trade Act Vessels § 28.855 Electrical distribution systems. (a) Each electrical distribution system which has a neutral bus or conductor must have the neutral bus or conductor... 46 Shipping 1 2010-10-01 2010-10-01 false Electrical distribution systems. 28.855 Section...

  11. Oilfield Flare Gas Electricity Systems (OFFGASES Project)

    Energy Technology Data Exchange (ETDEWEB)

    Rachel Henderson; Robert Fickes

    2007-12-31

    The Oilfield Flare Gas Electricity Systems (OFFGASES) project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under Preferred Upstream Management Projects (PUMP III). Project partners included the Interstate Oil and Gas Compact Commission (IOGCC) as lead agency working with the California Energy Commission (CEC) and the California Oil Producers Electric Cooperative (COPE). The project was designed to demonstrate that the entire range of oilfield 'stranded gases' (gas production that can not be delivered to a commercial market because it is poor quality, or the quantity is too small to be economically sold, or there are no pipeline facilities to transport it to market) can be cost-effectively harnessed to make electricity. The utilization of existing, proven distribution generation (DG) technologies to generate electricity was field-tested successfully at four marginal well sites, selected to cover a variety of potential scenarios: high Btu, medium Btu, ultra-low Btu gas, as well as a 'harsh', or high contaminant, gas. Two of the four sites for the OFFGASES project were idle wells that were shut in because of a lack of viable solutions for the stranded noncommercial gas that they produced. Converting stranded gas to useable electrical energy eliminates a waste stream that has potential negative environmental impacts to the oil production operation. The electricity produced will offset that which normally would be purchased from an electric utility, potentially lowering operating costs and extending the economic life of the oil wells. Of the piloted sites, the most promising technologies to handle the range were microturbines that have very low emissions. One recently developed product, the Flex-Microturbine, has the potential to handle the entire range of oilfield gases. It is deployed at an oilfield near Santa Barbara to run on waste gas

  12. Impact of energy efficiency and alternative sources in the Brazilian electric matrix: scenarios 2005-2050; Impacto da eficiencia energetica e das fontes alternativas na matriz eletrica brasileira: cenarios 2005-2050

    Energy Technology Data Exchange (ETDEWEB)

    Saidel, Marco A.; Gimenes, Andre L.V.; Fujii, Ricardo J. [Universidade de Sao Paulo (GEPEA/USP), SP (Brazil). Dept. de Energia e Automacao Eletricas. Grupo de Energia; Furtado, Marcelo [Greenpeace Brasil, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Part of a worldwide initiative championed by Greenpeace International and EREC - European Renewable Energy Council, a partnership between Greenpeace Brazil and GEPEA/USP were established for producing two national alternative energy scenarios, as a blueprint for how to meet forthcoming Brazilian energy needs in a sustainable way. Such scenarios, one reflecting the views of GEPEA/USP and another the perceptions by Greenpeace, were both based on a reference scenario strongly drawing from the 'Plano Decenal 2006-2015' and the 'Plano Nacional de Energia 2030', both by the Ministry of Mines and Energy. From the alternative scenarios one may see that is feasible to satisfy the increasing Brazilian demand through the integrated deployment of alternative resources, Natural Gas fueled thermal power plants and energy conservation measures. To develop the Brazilian electricity energy base in such terms, however, is mandatory to conduct further debate on energy planning issues, conservation measures and alternatives resources concerns included. (author)

  13. Review on Automotive Power Generation System on Plug-in Hybrid Electric Vehicles & Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Leong Yap Wee

    2016-01-01

    Full Text Available Regenerative braking is a function to recharge power bank on the Plug-in electric vehicles (PHEV and electric vehicles (EV. The weakness of this system is, it can only perform its function when the vehicle is slowing down or by stepping the brake foot pedal. In other words, the electricity recharging system is inconsistent, non-continuous and geography dependent. To overcome the weakness of the regenerative braking system, it is suggested that to apply another generator which is going to be parallel with the regenerative braking system so that continuous charging can be achieved. Since the ironless electricity generator has a less counter electromotive force (CEMF comparing to an ironcored electricity generator and no cogging torque. Applying the ironless electricity generator parallel to the regenerative braking system is seen one of the options which creates sustainable charging system compared to cored electricity generator.

  14. Mathematical Modeling of Hybrid Electrical Engineering Systems

    Directory of Open Access Journals (Sweden)

    A. A. Lobaty

    2016-01-01

    Full Text Available A large class of systems that have found application in various industries and households, electrified transportation facilities and energy sector has been classified as electrical engineering systems. Their characteristic feature is a combination of continuous and discontinuous modes of operation, which is reflected in the appearance of a relatively new term “hybrid systems”. A wide class of hybrid systems is pulsed DC converters operating in a pulse width modulation, which are non-linear systems with variable structure. Using various methods for linearization it is possible to obtain linear mathematical models that rather accurately simulate behavior of such systems. However, the presence in the mathematical models of exponential nonlinearities creates considerable difficulties in the implementation of digital hardware. The solution can be found while using an approximation of exponential functions by polynomials of the first order, that, however, violates the rigor accordance of the analytical model with characteristics of a real object. There are two practical approaches to synthesize algorithms for control of hybrid systems. The first approach is based on the representation of the whole system by a discrete model which is described by difference equations that makes it possible to synthesize discrete algorithms. The second approach is based on description of the system by differential equations. The equations describe synthesis of continuous algorithms and their further implementation in a digital computer included in the control loop system. The paper considers modeling of a hybrid electrical engineering system using differential equations. Neglecting the pulse duration, it has been proposed to describe behavior of vector components in phase coordinates of the hybrid system by stochastic differential equations containing generally non-linear differentiable random functions. A stochastic vector-matrix equation describing dynamics of the

  15. Power system for electric heating of pipelines

    OpenAIRE

    Novik, Frode Karstein

    2008-01-01

    Direct electrical heating (DEH) of pipelines is a flow assurance method that has proven to be a good and reliable solution for preventing the formation of hydrates and wax in multiphase flow lines. The technology is installed on several pipelines in the North Sea and has become StatoilHydros preferred method for flow assurance. Tyrihans is the newest installation with 10 MW DEH for a 43 km pipline. However, the pipeline represents a considerable single-phase load which makes the power system ...

  16. Battery management system for electric racing cars

    OpenAIRE

    Araújo, Joaquim Alexandre da Silva

    2013-01-01

    With the introduction of the electrics cars into the market new technologies regarding the battery are being developed and new problems to be solved, one of them the battery management system because each type of cell requires a specific way of handling. This research is done using the active research method to find out the actual problem on this subject and features a BMS should have, understand how they work and how to develop them applied to the purpose on this work. Once the features the ...

  17. Overview of the MFTF electrical systems

    International Nuclear Information System (INIS)

    The Mirror Fusion Test Facility, scheduled for completion in October 1981, will contain a complex, state-of-the-art array of electrical and electronics equipment valued at over 60 M$. Three injector systems will be employed to initiate and sustain the MFTF deuterium plasma. A plasma streaming system and a startup neutron beam system will be used to establish a target plasma. A sustaining neutral beam system will be used to fuel and sustain the MFTF plasma for 0.5 s. Additional power supply systems required on MFTF include two magnet power supplies with quench protection circuitry for powering the superconducting YIN/YANG magnet pair and eight 10 KHz power supplies for powering the Ti gettering system. Due to the complexity, physical size, and multiple systems of MFTF, a distributed, hierarchial, computer control and instrumentation system will be used. Color graphic, touch-panel, control consoles will provide the man-machine interface. The MFTF will have the capability of conducting an experiment every five minutes

  18. Oncogenetics service and the Brazilian public health system: the experience of a reference Cancer Hospital

    Directory of Open Access Journals (Sweden)

    Edenir I. Palmero

    2016-01-01

    Full Text Available Abstract The identification of families at-risk for hereditary cancer is extremely important due to the prevention potential in those families. However, the number of Brazilian genetic services providing oncogenetic care is extremely low for the continental dimension of the country and its population. Therefore, at-risk patients do not receive appropriate assistance. This report describes the creation, structure and management of a cancer genetics service in a reference center for cancer prevention and treatment, the Barretos Cancer Hospital (BCH. The Oncogenetics Department (OD of BCH offers, free of charge, to all patients/relatives with clinical criteria, the possibility to perform i genetic counseling, ii preventive examinations and iii genetic testing with the best quality standards. The OD has a multidisciplinary team and is integrated with all specialties. The genetic counseling process consists (mostly of two visits. In 2014, 614 individuals (371 families were seen by the OD. To date, over 800 families were referred by the OD for genetic testing. The support provided by the Oncogenetics team is crucial to identify at-risk individuals and to develop preventive and personalized behaviors for each situation, not only to the upper-middle class population, but also to the people whose only possibility is the public health system.

  19. A Comparative Study of the Brazilian Energy Labelling System and the Passivhaus Standard for Housing

    Directory of Open Access Journals (Sweden)

    Renata C. S. Tubelo

    2014-05-01

    Full Text Available The ever-increasing energy demand of the residential sector has required the adoption of tighter energy standards, aiming for high energy efficiency in dwellings. In Brazil, 24 million new residential buildings are planned to be delivered by 2022 through social housing programs, which could greatly impact on the country’s energy consumption. In an attempt to minimize this impact, the Brazilian Labelling Scheme for Residential Buildings (RTQ-R label was launched in 2010 as a voluntary standard for the evaluation of housing energy efficiency. The RTQ-R label focuses on building fabric and hot water systems performances, and generates a score based on the building’s energy efficiency levels. The Passivhaus standard, developed in Germany, is one of the most stringent standards and is also the fastest growing energy performance standard in the world with more than 30,000 buildings certified to date. It also focuses on building fabric but establishes a maximum energy consumption target. In this work, the authors developed a comparative review of the RTQ-R label and the Passivhaus standard as means to inform a broader debate about building codes in the context of the current calls by governments for increased energy efficiency. The findings highlighted the different nature of the standards’ requirements and targets adopted, and the benefits and constraints of both.

  20. The new tariff model based on marginal costs developing concept for Brazilian electric sector. A case study for Power and Light Company of Sao Paulo State (Brazil); O novo modelo tarifario baseado no conceito de custos marginais em desenvolvimento para o setor eletrico brasileiro. Um estudo de caso para a Companhia Paulista de Forca e Luz

    Energy Technology Data Exchange (ETDEWEB)

    Correia, S.P.S.

    1991-12-31

    A new methodology for power generation cost accounts in Brazilian electric sector is described, with the application of marginal costs theory and its deviation in developing economies. A case report from a Brazilian Power and Light Company is studied, focalizing the seasoning, the planning, the tariff model and the power generation, transmission and distribution. (M.V.M.). 19 refs, 28 figs, 1 tab.

  1. Wireless distributed functional electrical stimulation system

    Directory of Open Access Journals (Sweden)

    Jovičić Nenad S

    2012-08-01

    Full Text Available Abstract Background The control of movement in humans is hierarchical and distributed and uses feedback. An assistive system could be best integrated into the therapy of a human with a central nervous system lesion if the system is controlled in a similar manner. Here, we present a novel wireless architecture and routing protocol for a distributed functional electrical stimulation system that enables control of movement. Methods The new system comprises a set of miniature battery-powered devices with stimulating and sensing functionality mounted on the body of the subject. The devices communicate wirelessly with one coordinator device, which is connected to a host computer. The control algorithm runs on the computer in open- or closed-loop form. A prototype of the system was designed using commercial, off-the-shelf components. The propagation characteristics of electromagnetic waves and the distributed nature of the system were considered during the development of a two-hop routing protocol, which was implemented in the prototype’s software. Results The outcomes of this research include a novel system architecture and routing protocol and a functional prototype based on commercial, off-the-shelf components. A proof-of-concept study was performed on a hemiplegic subject with paresis of the right arm. The subject was tasked with generating a fully functional palmar grasp (closing of the fingers. One node was used to provide this movement, while a second node controlled the activation of extensor muscles to eliminate undesired wrist flexion. The system was tested with the open- and closed-loop control algorithms. Conclusions The system fulfilled technical and application requirements. The novel communication protocol enabled reliable real-time use of the system in both closed- and open-loop forms. The testing on a patient showed that the multi-node system could operate effectively to generate functional movement.

  2. Review of Aircraft Electric Power Systems and Architectures

    OpenAIRE

    Zhao, Xin; Guerrero, Josep M.; Wu, Xiaohao

    2014-01-01

    In recent years, the electrical power capacity is increasing rapidly in more electric aircraft (MEA), since the conventional mechanical, hydraulic and pneumatic energy systems are partly replaced by electrical power system. As a consequence, capacity and complexity of aircraft electric power systems (EPS) will increase dramatically and more advanced aircraft EPSs need to be developed. This paper gives a brief description of the constant frequency (CF) EPS, variable frequency (VF) EPS and adva...

  3. Investments in the Brazilian electric sector and the financial crisis; Investimentos no setor eletrico brasileiro e a crise financeira mundial

    Energy Technology Data Exchange (ETDEWEB)

    Vela, Jorge Alberto Alcala [Centrais Eletricas Brasileiras (ELETROBRAS), Rio de Janeiro, RJ (Brazil). Dept. de Gestao de Ativos no Exterior; Oliveira, Andre Luis Cantuaria Cardoso [Centrais Eletricas Brasileiras (ELETROBRAS), Rio de Janeiro, RJ (Brazil). Dept. de Financas e Investimentos

    2010-07-01

    The electricity sector in addition to being a public utility, requires a substantial investment, explore natural resources and the basis of all production chains and consumption of our society. The dynamics of this sector goes beyond the individual performance of energy companies and will also interfere in matters of political, economic, social and environmental development of nations. The lack of sophistication and low level of development in credit derivatives financial systems in Brazil, both as a healthy situation of the accounts and balance sheets, the fruit of bitter experience in past crises are allowing a better resistance to weather the current crisis. But it is an important trading partner of Brazil, through various business financial economic crises that is affecting the U.S. economy and the world has also affected the economy of our country, but with less intensity. The econometric model used to study the investment to be initiated in 2010 by ELETROBRAS meets a correlation acceptable; this demonstrates that a well dependence exists between power and investment to the projects to be implemented. (author)

  4. Commercial information system of Slovak Electricity Transmission System, Plc

    International Nuclear Information System (INIS)

    Commercial Information System (CIS), which main role of is to support the commercial activities of the company, is built up by business department of SEPS, Plc in close co-operation with the supplier company Sfera, Plc. The system entries are data from electricity meters obtained by automatized data acquisition and from bugging sheets, contractual hour diagrams, parameters of transmission system like measuring schemes and formulas for calculation of demand and supply, contractual data resulting from agreements, business conditions, URSO decisions and valid legislative. A part of the system is also support of process of data evaluation like calculation of transmitted energy quantity, calculation of actual output diagrams, comparison of actual and contractual diagrams, calculation of system divergence, calculation of demand divergence, etc. The final price for the drawings of services, which are joined with transmission of the electric power will be determined by the accounting process. In this causality there are automatically made out invoices for access, losses, system charges, system services, short-term and long-term transits, divergences and for cross-border transmission auctions. System also generates various specialized synopses and statistics for the evaluation requirements of important aspects and for parameter observations. Successive liberalisation of the electricity power market, changes in legislative and URSO decisions require CIS to be sufficiently configurable and to adapt flexible on the alternating environs. (author)

  5. The role of the nuclear industry in the Brazil's electricity system; Le role du nucleaire dans le systeme electrique Bresilien

    Energy Technology Data Exchange (ETDEWEB)

    Pinheiro Da Silva, O.L.; Dos Santos Guimaraes, L. [Electronuclear - Electrobras Termonuclear (Brazil)

    2009-11-15

    No form of energy - renewable, clean or whatever other name it is given - can constitute the sole solution to the challenge of ensuring electric power supplies that are compatible with a country's economic and social growth. Brazilian consumption and installed electrical generation capacity per capita are stiller low, below the world average - that is the main factor that needs to be stressed. The catch-up requires that the country benefit it as much as possible and as soon as possible from all available sources to increase electricity generation capacity allowing increased consumption compatible with the way of life that Brazilians aspire to. A country's electrical system planning requires the efficient management of a diversified array of energy sources. Regarding Brazil, hydro power will be or several decades the main component in its electricity generation portfolio. Nonetheless, it already needs to be complemented by thermal sources - uranium, coal, bio-mass, natural gas and petroleum-based oil - in that order of importance, taking account of such actors as availability on the home territory, costs, environmental impacts and uses in other applications. (authors)

  6. Impacts of Electric Vehicle Loads on Power Distribution Systems

    DEFF Research Database (Denmark)

    Pillai, Jayakrishnan Radhakrishna; Bak-Jensen, Birgitte

    2010-01-01

    operation. This paper investigates the effects on the key power distribution system parameters like voltages, line drops, system losses etc. by integrating electric vehicles in the range of 0-50% of the cars with different charging capacities. The dump as well as smart charging modes of electric vehicles......Electric vehicles (EVs) are the most promising alternative to replace a significant amount of gasoline vehicles to provide cleaner, CO2 free and climate friendly transportation. On integrating more electric vehicles, the electric utilities must analyse the related impacts on the electricity system...... is applied in this analysis. A typical Danish primary power distribution system is used as a test case for the studies. From the simulation results, not more than 10% of electric vehicles could be integrated in the test system for the dump charging mode. About 40% of electric vehicle loads could...

  7. The sustainable expansion of the brazilian electric sector from the use of sustainability indicators as support instruments to decision; A expansao sustentavel do setor eletrico brasileiro a partir do uso de indicadores de sustentabilidade como instrumento de apoio a decisao

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luciano B. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Inst. Virtual Internacional de Mudancas Globais (IVIG)]. E-mail: luciano@ivig.coppe.ufrj.br; Soares, Jeferson B. [Empresa de Pesquisa Energetica (EPE), Brasilia, DF (Brazil). Superintendencia de Recursos Energeticos]. E-mail: jeferson.soares@epe.gov.br; Rovere, Emilio L. La [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Lab. Interdisciplinar de Meio Ambiente (LIMA)]. E-mail: emilio@ppe.ufrj.br

    2006-07-01

    This article presents a proposal of an integrated evaluation methodology of offer electric energy expansion, considering not only technological and economical aspects but the environmental and social aspects as well. The proposal is based on the establishment of an indicators set for electricity generation from: small hydroelectric power plants, sugar cane bagasse, biodiesel, eolic wind, urban solid residues and natural gas. From those indicators a multicriteria analysis is applied to a case study, allowing to learn simultaneously the influence of environmental and social questions on the decision making of the brazilian electric sector expansion.

  8. Improving Sound Systems by Electrical Means

    DEFF Research Database (Denmark)

    Schneider, Henrik

    to intelligent control and protection functionality and so on. In this work different strategies towards improvements of sound systems by electrical means was investigated considering the interfaces between each component and the performance of the full system. The strategies can be categorized by improvements...... of sound quality, efficiency, size and cost as well as production. The transducer is considered the weakest component when it comes to sound quality which is especially apparent for micro-speakers. Historically the common voltage drive of a transducer has been challenged by the alternative current drive...... reduction in the best case. This technology is very promising since it compensates for most distortion mechanisms of the transducer such as non-linearities, production variation, wear-n-tear, temperature changes and so on. Furthermore the accelerometer output can be used for protection purposes. The only...

  9. Optimization and Control of Electric Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, Bernard C. [Univ. of Wisconsin, Madison, WI (United States); Molzahn, Daniel K. [Univ. of Wisconsin, Madison, WI (United States)

    2014-10-17

    The analysis and optimization needs for planning and operation of the electric power system are challenging due to the scale and the form of model representations. The connected network spans the continent and the mathematical models are inherently nonlinear. Traditionally, computational limits have necessitated the use of very simplified models for grid analysis, and this has resulted in either less secure operation, or less efficient operation, or both. The research conducted in this project advances techniques for power system optimization problems that will enhance reliable and efficient operation. The results of this work appear in numerous publications and address different application problems include optimal power flow (OPF), unit commitment, demand response, reliability margins, planning, transmission expansion, as well as general tools and algorithms.

  10. Emission factor of gases from the greenhouse effect for the brazilian interconnected system; Fator de emissao de gases de efeito estufa para o sistema interligado brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Esparta, A. Ricardo J. [Ecoinvest Carbon S.A., Sao Paulo, SP (Brazil)]. E-mail: esparta@iee.usp.br; esparta@ecoinvestcarbon.com; Fernandez, Pablo [EcoSecurities, Rio de Janeiro, RJ (Brazil)]. E-mail: pablo.fernandez@ecosecurities.com.br; Costa, David Freire da [Econergy Brasil, Sao Paulo, SP (Brazil)]. E-mail: freire@econergy.com.br

    2006-07-01

    The participation of new power generation projects of the Brazilian interconnected system in the Clean Development Mechanism of the Kyoto Protocol demand the definition of greenhouse gases baseline emission scenarios and monitoring methodologies. The present paper describes the reasoning behind approved methodologies for capacity addition from renewable sources as well as carries out the calculation of the emission factor for the Brazilian interconnected grid. (author)

  11. 30 CFR 36.32 - Electrical components and systems.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electrical components and systems. 36.32... TRANSPORTATION EQUIPMENT Construction and Design Requirements § 36.32 Electrical components and systems. (a) Electrical components on mobile diesel-powered transportation equipment shall be certified or approved...

  12. Voltage inverter with push-pull topology to inject energy into electrical systems with modulation SPWM

    Directory of Open Access Journals (Sweden)

    Emerson Charles M. Silva

    2013-09-01

    Full Text Available This paper presents a proposal for a voltage inverter topology based on push-pull converters, switched at high frequency to inject energy into the grid from a source of DC power. A system using two reverse voltage static converters provides the power grid; energy in the form of alternating current, that can work in conjunction with the provision of utility power. Aiming at the possible use of renewable energy sources, that can be stored in the form of voltage continuous, such as wind, solar, hydroelectric and others. The functioning of topology is presented, such as the power and control circuits, as well as sizing components, theoretical and practical results achieved with the assembly of a prototype 100W of power and switching in 40khz, which after filtering provides the frequency of 60Hz, which is compatible with the Brazilian electrical system.

  13. Impact of Plug-In Hybrid Electric Vehicles on the Electricity System

    OpenAIRE

    Clement-Nyns, Kristien

    2010-01-01

    Plug-in hybrid electric vehicles, are rapidly gaining interest. Batteries of plug-in hybrid electric vehicles are charged by either plugging into electric outlets or by an on-board generator. For grid charging, these batteries are supplied by power from the grid at home from a standard outlet or on a corporate car park. The extra electrical load, from charging the batteries, has an impact on the electricity system in general and more specifically on the distribution grid and the electricity g...

  14. The system of innovation of Brazilian sugar cane agribusiness; O sistema de inovacao da agroindustria canavieira brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, Andre Tosi [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Geociencias. Dept. de Politica Cientifica e Tecnologica], e-mail: furtado@ige.unicamp.br; Cortez, Luis Augusto Barbosa [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Agricola], e-mail: mirna@fem.unicamp.br; Scandiffio, Mirna Ivonne Gaya [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico

    2008-07-01

    Ethanol has been recently of great interest due to two main reasons. First, it is a viable alternative to oil derivates used in light vehicles, which price has been substantially raised in the last years. In second place because ethanol is a renewable source of energy, that mitigates the emission of greenhouse effect gases. Although Brazil is losing its leadership of ethanol production for the United States, it raises internationally as the leading country to develop its ethanol production from biomass. Differently from the American system which relies on corn as principal raw material, Brazilian ethanol is produced from sugarcane. The Brazilian route shows up as much more competitive and much less pollution contributor than the American one. The objective of this work is to analyze the leading aspects of the Brazilian Innovation System built around the sugarcane industry. The Brazilian success in terms of sugarcane can not be understood just as based in a natural comparative advantage, but it is a result of accumulation of efforts which ended in a virtuous trajectory of technological learning, relying, mostly, in incremental innovations. That process had, as inflection point, the Pro Alcohol Program, launched after the first oil crisis in 1973. From that Program on, the agricultural industry started the diffusion of innovations making possible constant increases of productivity and cost reduction on its production. The technological advance brought benefit to the alcohol and sugar production, of which Brazil became the main world producer. This work is based on the approach of national systems of innovation, according to which the innovative performance of a country, region or even a sector, can not be learned only by focusing the efforts and performance of the companies. Innovation results from the interaction of actors from different institutional nature. To analyze the institutional arrangements as the basis to the innovative process, this work will get

  15. Operating health analysis of electric power systems

    Science.gov (United States)

    Fotuhi-Firuzabad, Mahmud

    The required level of operating reserve to be maintained by an electric power system can be determined using both deterministic and probabilistic techniques. Despite the obvious disadvantages of deterministic approaches there is still considerable reluctance to apply probabilistic techniques due to the difficulty of interpreting a single numerical risk index and the lack of sufficient information provided by a single index. A practical way to overcome difficulties is to embed deterministic considerations in the probabilistic indices in order to monitor the system well-being. The system well-being can be designated as healthy, marginal and at risk. The concept of system well-being is examined and extended in this thesis to cover the overall area of operating reserve assessment. Operating reserve evaluation involves the two distinctly different aspects of unit commitment and the dispatch of the committed units. Unit commitment health analysis involves the determination of which unit should be committed to satisfy the operating criteria. The concepts developed for unit commitment health, margin and risk are extended in this thesis to evaluate the response well-being of a generating system. A procedure is presented to determine the optimum dispatch of the committed units to satisfy the response criteria. The impact on the response wellbeing being of variations in the margin time, required regulating margin and load forecast uncertainty are illustrated. The effects on the response well-being of rapid start units, interruptible loads and postponable outages are also illustrated. System well-being is, in general, greatly improved by interconnection with other power systems. The well-being concepts are extended to evaluate the spinning reserve requirements in interconnected systems. The interconnected system unit commitment problem is decomposed into two subproblems in which unit scheduling is performed in each isolated system followed by interconnected system evaluation

  16. 78 FR 803 - Revisions to Electric Reliability Organization Definition of Bulk Electric System and Rules of...

    Science.gov (United States)

    2013-01-04

    ... Procedure, Notice of Proposed Rulemaking, 77 FR 39857 (July 5, 2012) 139 FERC ] 61,247 (2012) (NOPR). I... to Electric Reliability Organization Definition of Bulk Electric System and Rules of Procedure; Final...; ] DEPARTMENT OF ENERGY Federal Energy Regulatory Commission 18 CFR Part 40 Revisions to Electric...

  17. Battery Management System Design and Implementation in Electric Raceabout - Electric Sportscar

    OpenAIRE

    Sainio, Joonas

    2013-01-01

    The purpose of this Bachelor´s study was to design and implement a new user-configurable battery management system into Electric Raceabout – electric sports car. This new improved system design would replace the old battery management system in the vehicle. The thesis begins by characterizing a professional battery management system and representing the benefits of the new system. Following the objectives of professional battery management systems, the new battery management system was de...

  18. Review of Aircraft Electric Power Systems and Architectures

    DEFF Research Database (Denmark)

    Zhao, Xin; Guerrero, Josep M.; Wu, Xiaohao

    2014-01-01

    In recent years, the electrical power capacity is increasing rapidly in more electric aircraft (MEA), since the conventional mechanical, hydraulic and pneumatic energy systems are partly replaced by electrical power system. As a consequence, capacity and complexity of aircraft electric power...... systems (EPS) will increase dramatically and more advanced aircraft EPSs need to be developed. This paper gives a brief description of the constant frequency (CF) EPS, variable frequency (VF) EPS and advanced high voltage (HV) EPS. Power electronics in the three EPS is overviewed. Keywords: Aircraft Power...... System, More Electric Aircraft, Constant Frequency, Variable Frequency, High Voltage....

  19. Economic market design and planning for electric power systems

    CERN Document Server

    Mili, Lamine

    2010-01-01

    Discover cutting-edge developments in electric power systems. Stemming from cutting-edge research and education activities in the field of electric power systems, this book brings together the knowledge of a panel of experts in economics, the social sciences, and electric power systems. In ten concise and comprehensible chapters, the book provides unprecedented coverage of the operation, control, planning, and design of electric power systems. It also discusses:. A framework for interdisciplinary research and education;. Modeling electricity markets;. Alternative economic criteria and proactiv.

  20. Diagnosing Faults in Electrical Power Systems of Spacecraft and Aircraft

    Data.gov (United States)

    National Aeronautics and Space Administration — Electrical power systems play a critical role in spacecraft and aircraft, and they exhibit a rich variety of failure modes. This paper discusses electrical power...

  1. The Tractor Electrical System. A Teaching Reference.

    Science.gov (United States)

    American Association for Vocational Instructional Materials, Athens, GA.

    The fundamental principles underlying the application of electricity to tractors and farm equipment are presented. An understanding of the material in the basic manual will enable the service man to understand better the service procedures covered in service manuals on electrical equipment. Topics dealt with are fundamentals of electricity,…

  2. Electrical system architecture having high voltage bus

    Science.gov (United States)

    Hoff, Brian Douglas; Akasam, Sivaprasad

    2011-03-22

    An electrical system architecture is disclosed. The architecture has a power source configured to generate a first power, and a first bus configured to receive the first power from the power source. The architecture also has a converter configured to receive the first power from the first bus and convert the first power to a second power, wherein a voltage of the second power is greater than a voltage of the first power, and a second bus configured to receive the second power from the converter. The architecture further has a power storage device configured to receive the second power from the second bus and deliver the second power to the second bus, a propulsion motor configured to receive the second power from the second bus, and an accessory motor configured to receive the second power from the second bus.

  3. A proposal of cost evaluation of own capital for the Brazilian electric sector; Uma proposta de avaliacao do custo do capital proprio para o setor de energia eletrica brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Serrano, Ricardo Oliveira L.

    2003-12-01

    This work studies the own capital cost of the Brazilian electric sector, by using three methodologies: Comparable Accounting Results (CAR), using historical values for measurement, Discounted Cash Flow (DCF) and the CAPM, elaborated from expected values.The obtained results by using the CAR method indicated that the Brazilian electric power sector is not receiving remuneration according to the real maintenance and expansion necessities. Based on this observation, it was considered appropriated to discard the CAR method in the proposed methodology, therefore using the simply average of the CAPM e DCF models. By using the simply average of the models presents the advantage of capturing specific characteristics of each model, and to dilute effects of eventual extreme values.

  4. Advanced Electric Traction System Technology Development

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Iver

    2011-01-14

    As a subcontractor to General Motors (GM), Ames Laboratory provided the technical expertise and supplied experimental materials needed to assess the technology of high energy bonded permanent magnets that are injection or compression molded for use in the Advanced Electric Traction System motor. This support was a sustained (Phase 1: 6/07 to 3/08) engineering effort that builds on the research achievements of the primary FreedomCAR project at Ames Laboratory on development of high temperature magnet alloy particulate in both flake and spherical powder forms. Ames Lab also provide guidance and direction in selection of magnet materials and supported the fabrication of experimental magnet materials for development of injection molding and magnetization processes by Arnold Magnetics, another project partner. The work with Arnold Magnetics involved a close collaboration on particulate material design and processing to achieve enhanced particulate properties and magnetic performance in the resulting bonded magnets. The overall project direction was provided by GM Program Management and two design reviews were held at GM-ATC in Torrance, CA. Ames Lab utilized current expertise in magnet powder alloy design and processing, along with on-going research advances being achieved under the existing FreedomCAR Program project to help guide and direct work during Phase 1 for the Advanced Electric Traction System Technology Development Program. The technical tasks included review of previous GM and Arnold Magnets work and identification of improvements to the benchmark magnet material, Magnequench MQP-14-12. Other benchmark characteristics of the desired magnet material include 64% volumetric loading with PPS polymer and a recommended maximum use temperature of 200C. A collaborative relationship was maintained with Arnold Magnets on the specification and processing of the bonded magnet material required by GM-ATC.

  5. Electrical system/environment interactions on the planet Mars

    Science.gov (United States)

    Kolecki, J. C.; Hillard, G. B.; Ferguson, D. C.

    1991-01-01

    The Martian environment is a diverse environment with which systems will interact in numerous ways. Preliminary thoughts on electrical system/environment interactions which might be of interest to system designers at all stages of system design are presented. These interactions are primarily related to electrical charging, contamination, and Martian surface sand and dust.

  6. Improved pasture and herd management to reduce greenhouse gas emissions from a Brazilian beef production system

    NARCIS (Netherlands)

    Mazzetto, A.M.; Feigl, B.J.; Schils, R.L.M.; Cerri, C.E.P.; Cerri, C.C.

    2015-01-01

    Brazilian farms produce 15% of the world[U+05F3]s beef, and consequently they are important sources of greenhouse gases (GHG). The beef sector faces the challenge to meet the increasing demand without further increase of GHG emissions. To reduce the pressure on forests it is essential that farmer

  7. Operation of Modern Distribution Power Systems in Competitive Electricity Markets

    DEFF Research Database (Denmark)

    Hu, Weihao

    In this dissertation, the characteristics of a distribution system under a dynamic electricity-pricing, load management system and under a large number of power electronic interfaced distributed generation units are investigated. The operation characteristics of a power system with wind turbines......, DG units, loads and electricity price are studied. Further, the effect of energy storage systems will be considered, and an optimal operation strategy for energy storage devices in a large scale wind power system in the electricity market is proposed. The western Danish power system, which has large...... penetrations of variable wind power production and may represent the future electricity markets in some ways, is chosen as the studied power system. 10 year actual data from the Danish competitive electricity market are collected and analyzed. The relationship among the electricity price, the consumption...

  8. Treatment outcomes in tuberculosis patients with diabetes: a polytomous analysis using Brazilian surveillance system.

    Directory of Open Access Journals (Sweden)

    Bárbara Reis-Santos

    Full Text Available The impact of non-communicable diseases on tuberculosis incidence has received significant attention. It has been suggested that the risk of tuberculosis is higher among subjects with diabetes and these subjects also has poor TB treatment outcomes.This study was aimed at assessing the socio-demographic and clinical factors that may influence different outcome of TB in patients with DM (TB-DM identified in the Brazilian national database from 2001 to 2011.TB-DM cases reported in the Brazilian information system were identified and compared.Covariates associated with the outcomes of interest (cure, default, deaths, and development of TB MDR were included in a hierarchical regression model.TB-DM cases increased from 380/100,000/year in 2001 to 6,150/100,000/year in 2011. Some of the main associations found are pointed. The odds of default was higher among those in the age group 20-39 years (OR = 2.07, 95%CI 1.32-3.24; alcoholics (OR = 2.17, 95%CI 1.86-2.54, and HIV/AIDS (OR = 2.16, 95%CI 1.70-2.74;positive monitoring smear (OR = 1.94, 95%CI 1.55-2.43; prior default (OR = 5.41, 95%CI 4.47-6.54, and unknown type of treatment (OR = 3.33, 95%CI 1.54-7.22. The odds of death was greater for subjects ≥60 years old (OR = 2.74, 95%CI 1.74-4.29; institutionalized in shelter (OR = 2.69, 95%CI 1.07-6.77; alcoholics (OR = 2.70, 95%CI 2.27-3.22; HIV/AIDS (OR = 2.87, 95%CI 2.13-3.86; pulmonary+extrapulmonary TB (OR = 2.49, 95%CI 1.79-3.46; with unknown type of treatment (OR = 14.12, 95%CI 7.04-28.32.Development of MDR TB was more related to relapse (OR = 9.60, 95%CI 6.07-15.14;previous default (OR = 17.13, 95%CI 9.58-30.63; and transfer of treatment center (OR = 7.87, 95%CI 4.74-13.07.Older subjects and those with comorbidities and with a previous treatment of TB had poorest outcomes. TB control program in Brazil will need to expand efforts to focus on treatment of TB-DM patients to improve their cure

  9. Making tenofovir accessible in the brazilian public health system: patent conflicts and generic production.

    Science.gov (United States)

    Veras, Juliana

    2014-08-01

    In May 2011, the Brazilian Ministry of Health announced the distribution of the first batch of locally produced generic tenofovir disoproxil fumarate (TDF) to support its program of universal and free access for the treatment of HIV/AIDS. The inclusion of TDF in the public health program illustrates what has been considered the 'Brazilian model' of HIV/AIDS response, as it illustrates the current phase of the Brazilian pharmaceutical economy. Brazil is known for having managed to control the expansion of HIV/AIDS through a unique initiative combining the public health and the industrial production of generics. But, if at first local manufacturers could freely copy ARVs and produce cheaper generic versions that were delivered to the Ministry of Health, since the country started to grant patents on drugs in 1996, the sustainability of this policy has been challenged by the high cost of patented second-line HIV/AIDS treatments. In order to assure continuity of the local production of ARVs, and keep the program of public health alive, Brazilians are now forced to deal with conflicts of drugs' intellectual property rights in order to open the path to generic production. This article aims to describe the experiences surrounding TDF in Brazil and the unprecedented conflicts and challenges it has brought for our different interviewees. Blurring the frontier between the public and the private, the TDF case was driven at the same time by an ethic of drug access and regulation of drug quality, which has inspired Brazilians to intervene and transform the world they live in.

  10. Hybrid systems to address seasonal mismatches between electricity production and demand in nuclear renewable electrical grids

    International Nuclear Information System (INIS)

    A strategy to enable zero-carbon variable electricity production with full utilization of renewable and nuclear energy sources has been developed. Wind and solar systems send electricity to the grid. Nuclear plants operate at full capacity with variable steam to turbines to match electricity demand with production (renewables and nuclear). Excess steam at times of low electricity prices and electricity demand go to hybrid fuel production and storage systems. The characteristic of these hybrid technologies is that the economic penalties for variable nuclear steam inputs are small. Three hybrid systems were identified that could be deployed at the required scale. The first option is the gigawatt-year hourly-to-seasonal heat storage system where excess steam from the nuclear plant is used to heat rock a kilometer underground to create an artificial geothermal heat source. The heat source produces electricity on demand using geothermal technology. The second option uses steam from the nuclear plant and electricity from the grid with high-temperature electrolysis (HTR) cells to produce hydrogen and oxygen. Hydrogen is primarily for industrial applications; however, the HTE can be operated in reverse using hydrogen for peak electricity production. The third option uses variable steam and electricity for shale oil production. -- Highlights: •A system is proposed to meet variable hourly to seasonal electricity demand. •Variable solar and wind electricity sent to the grid. •Base-load nuclear plants send variable steam for electricity and hybrid systems. •Hybrid energy systems can economically absorb gigawatts of variable steam. •Hybrid systems include geothermal heat storage, hydrogen, and shale-oil production

  11. A proposal for evaluation of the owner capital cost for the Brazilian electric power sector; Uma proposta de avaliacao do custo do capital proprio para o setor de energia eletrica brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Serrano, Ricardo Oliveira L.

    2003-12-01

    This work studies the owner capital cost of the brazilian electric sector, according to three methods: Comparable Accounting Earnings, that uses historical values in its measuring and Discounted Cash Flow (DCF) and the Capital Asset Pricing Model (CAPM), elaborated from the expected values. The obtained results by using the CAE method showed that the Brazilian electric sector has not been rewarded in its real necessity of maintenance and expansion. From this observation, it was considered appropriated not to take this method in the methodology presently proposed, which will be using only the single average of the CAPM and DCF models. The use of the results single average of this model presents the advantage of selecting specific characteristics of each one, and diluting the effects of occasional peak values. The owner capital cost obtained from this work was the average value of 19.73% for the studied period - 1995/2003 (17.12% for 2003), proximate to the obtained result by ANEEL - brazilian agency of electric power - for investments in energy distribution in Brazil, 17.47%, while Minardi and Sanvicente (2003) obtained 36.06% for the owner capital cost of CEMIG in 2002, specifically.

  12. HEMP emergency planning and operating procedures for electric power systems

    Energy Technology Data Exchange (ETDEWEB)

    Reddoch, T.W.; Markel, L.C. (Electrotek Concepts, Inc., Knoxville, TN (United States))

    1991-01-01

    Investigations of the impact of high-altitude electromagnetic pulse (HEMP) on electric power systems and electrical equipment have revealed that HEMP creates both misoperation and failures. These events result from both the early time E[sub 1] (steep-front pulse) component and the late time E[sub 3] (geomagnetic perturbations) component of HEMP. In this report a HEMP event is viewed in terms of its marginal impact over classical power system disturbances by considering the unique properties and consequences of HEMP. This report focuses on system-wide electrical component failures and their potential consequences from HEMP. In particular, the effectiveness of planning and operating procedures for electric systems is evaluated while under the influence of HEMP. This assessment relies on published data and characterizes utilities using the North American Electric Reliability Council's regions and guidelines to model electric power system planning and operations. Key issues addressed by the report include how electric power systems are affected by HEMP and what actions electric utilities can initiate to reduce the consequences of HEMP. The report also reviews the salient features of earlier HEMP studies and projects, examines technology trends in the electric power industry which are affected by HEMP, characterizes the vulnerability of power systems to HEMP, and explores the capability of electric systems to recover from a HEMP event.

  13. Optimal management of electric vehicles with a hybrid storage system

    OpenAIRE

    Vinot, Emmanuel; Trigui, Rochdi; Jeanneret, Bruno

    2010-01-01

    This paper presents a comparison between two offline optimisation methods for energy management applied to electrical vehicle with one electrical machine and fed by a hybrid storage system composed of batteries and ultra-capacitors. After a short presentation of the two methods, they are applied and compared to the case of an electric micro bus.

  14. DISTRIBUTED ELECTRICAL POWER PRODUCTION SYSTEM AND METHOD OF CONTROL THEREOF

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a distributed electrical power production system wherein two or more electrical power units comprise respective sets of power supply attributes. Each set of power supply attributes is associated with a dynamic operating state of a particular electrical power unit....

  15. Midwives and obstetric nurses in the Brazilian Unified Health System and Primary Health Care: for a systemic and progressive incorporation

    Directory of Open Access Journals (Sweden)

    Armando Henrique Norman

    2015-03-01

    Full Text Available The objective of this paper is to present a proposal for a gradual and systemic incorporation of midwives and obstetric nurses into the Brazilian Unified Health System (SUS and Primary Health Care (PHC. The proposal was born from contact with the British experience, based on midwives, which is briefly described. In Brazil, these professionals would progressively take over the prenatal, delivery and postpartum care for pregnant women of usual risk in a region, in partnership with the PHC teams. This creates a specific niche for practicing, monitoring and evaluating the pregnancy care, based on the specific life cycle continued care with the user closely linked to the PHC team. There are technical and institutional conditions favorable to the development of this type of proposal, but there is a need to overcome the political obstacles. Its realization is a powerful strategy to reduce the high rates of obstetric violence, especially the significant cesarean rates in Brazil, contributing to humanization of childbirth in the SUS.

  16. [The Hospital Information System of the Brazilian Unified National Health System: a performance evaluation for auditing maternal near miss].

    Science.gov (United States)

    Nakamura-Pereira, Marcos; Mendes-Silva, Wallace; Dias, Marcos Augusto Bastos; Reichenheim, Michael E; Lobato, Gustavo

    2013-07-01

    This study aimed to investigate the performance of the Hospital Information System of the Brazilian Unified National Health System (SIH-SUS) in identifying cases of maternal near miss in a hospital in Rio de Janeiro, Brazil, in 2008. Cases were identified by reviewing medical records of pregnant and postpartum women admitted to the hospital. The search for potential near miss events in the SIH-SUS database relied on a list of procedures and codes from the International Classification of Diseases, 10th revision (ICD-10) that were consistent with this diagnosis. The patient chart review identified 27 cases, while 70 potential occurrences of near miss were detected in the SIH-SUS database. However, only 5 of 70 were "true cases" of near miss according to the chart review, which corresponds to a sensitivity of 18.5% (95%CI: 6.3-38.1), specificity of 94.3% (95%CI: 92.8-95.6), area under the ROC of 0.56 (95%CI: 0.48-0.63), and positive predictive value of 10.1% (IC95%: 4.7-20.3). These findings suggest that SIH-SUS does not appear appropriate for monitoring maternal near miss. PMID:23843001

  17. Electric mobility and charging: systems of systems and infrastructure systems

    NARCIS (Netherlands)

    Bonnema, G. Maarten; Muller, Gerrit; Schuddeboom, Lisette

    2015-01-01

    In light of European and worldwide environmental programs, reduction of CO2 emissions and improvements in air quality receive a lot of attention. A prominent way to improve on both aspects is the replacement of Internal Combustion Engine Vehicles with Electrical Vehicles. Yet, simply replacing vehic

  18. Solar/electric heating systems for the future energy system

    DEFF Research Database (Denmark)

    Furbo, Simon; Dannemand, Mark; Perers, Bengt;

    The project “Solar/electric heating systems in the future energy system” was carried out in the period 2008‐2013. The project partners were DTU Byg, DTU Informatics (now DTU Compute), DMI, ENFOR A/S and COWI A/S. The companies Ajva ApS, Ohmatex ApS and Innogie ApS worked together with the project...... partners in two connected projects in order to develop solar/electric heating systems for laboratory tests. The project was financed by the Danish Agency for Science, Technology and Innovation under the Danish Council for Strategic Research in the program Sustainable Energy and Environment. The DSF number...... of the project is 2104‐07‐0021/09‐063201/DSF. This report is the final report of the project. The aim of the project is to elucidate how individual heating units for single family houses are best designed in order to fit into the future energy system. The units are based on solar energy, electrical heating...

  19. Management Control in Major Brazilian Multiple Banks: the Impact of Internationalization and Convergence of Accounting Standards on the Control Systems

    Directory of Open Access Journals (Sweden)

    João Carlos Damasceno Reis

    2014-08-01

    Full Text Available This study verifies the impact caused by the processes of globalization and convergence to international accounting standards on the managerial control systems of the largest multiple banks that operate in Brazil. The study was exploratory in nature, with the use of the case study method and the application of questionnaires containing mostly open questions to upper tier executives of four major Brazilian banks. The analysis showed that globalization has resulted in improved control systems and widespread use of information technology. It was also found that the convergence to international accounting standards occurred properly, thanks to the steps taken by the Central Bank that aimed at an agile updating of the Brazilian accounting standards laid down for banks operating in Brazil, in line with international standards. In general, the researched banks did not report a significant impact of convergence to the IFRS on their management control systems; adherence to the international accounting standards has had more significant impacts on information systems, especially regarding the new reporting and transparency standards, rather than on management controls. This result signals that the management control systems of the four banks in the sample are in line with Anthony (1965’s vision, that is, that flexibility to adapt to every change in the external environment might actually increase risks of failure.

  20. 75 FR 72909 - Revision to Electric Reliability Organization Definition of Bulk Electric System

    Science.gov (United States)

    2010-11-26

    ... Reliability Organization Definition of Bulk Electric System, Notice of Proposed Rulemaking, 75 FR 14097 (Mar... Electric System, Notice of Proposed Rulemaking, 75 FR 14097 (Mar. 24, 2010), FERC Stats. & Regs. ] 32,654... the NOPR in this Final Rule, as described below. \\26\\ See 75 FR 14097 (Mar. 24, 2010). \\27\\ A list...

  1. Human resources for health and decentralization policy in the Brazilian health system

    Directory of Open Access Journals (Sweden)

    Pierantoni Celia

    2011-05-01

    Full Text Available Abstract Background The Brazilian health reform process, following the establishment of the Unified Health System (SUS, has had a strong emphasis on decentralization, with a special focus on financing, management and inter-managerial agreements. Brazil is a federal country and the Ministry of Health (MoH, through the Secretary of Labour Management and Health Education, is responsible for establishing national policy guidelines for health labour management, and also for implementing strategies for the decentralization of management of labour and education in the federal states. This paper assesses whether the process of decentralizing human resources for health (HRH management and organization to the level of the state and municipal health departments has involved investments in technical, political and financial resources at the national level. Methods The research methods used comprise a survey of HRH managers of states and major municipalities (including capitals and focus groups with these HRH managers - all by geographic region. The results were obtained by combining survey and focus group data, and also through triangulation with the results of previous research. Results The results of this evaluation showed the evolution policy, previously restricted to the field of 'personnel administration', now expanded to a conceptual model for health labour management and education-- identifying progress, setbacks, critical issues and challenges for the consolidation of the decentralized model for HRH management. The results showed that 76.3% of the health departments have an HRH unit. It was observed that 63.2% have an HRH information system. However, in most health departments, the HRH unit uses only the payroll and administrative records as data sources. Concerning education in health, 67.6% of the HRH managers mentioned existing cooperation with educational and teaching institutions for training and/or specialization of health workers. Among them

  2. Configurations of hybrid-electric cars propulsion systems

    OpenAIRE

    Cundev, Dobri; Sarac, Vasilija; Stefanov, Goce

    2011-01-01

    Over the last few years, hybrid electric cars have taken significant role in automotive market. There are successful technological solutions of hybrid-electric propulsion systems implemented in commercial passenger cars. Every automobile manufacturer of hybrid vehicles has unique hybrid propulsion system. In this paper, all implemented systems are described, analyzed and compared.

  3. Spacecraft Electrical Power System (EPS) generic analysis tools and techniques

    Science.gov (United States)

    Morris, Gladys M.; Sheppard, Mark A.

    1992-01-01

    An overview is provided of the analysis tools and techiques used in modeling the Space Station Freedom electrical power system, as well as future space vehicle power systems. The analysis capabilities of the Electrical Power System (EPS) are described and the EPS analysis tools are surveyed.

  4. System for the co-production of electricity and hydrogen

    Science.gov (United States)

    Pham, Ai Quoc; Anderson, Brian Lee

    2007-10-02

    Described herein is a system for the co-generation of hydrogen gas and electricity, wherein the proportion of hydrogen to electricity can be adjusted from 0% to 100%. The system integrates fuel cell technology for power generation with fuel-assisted steam-electrolysis. A hydrocarbon fuel, a reformed hydrocarbon fuel, or a partially reformed hydrocarbon fuel can be fed into the system.

  5. Algebraic structure and Poisson's theory of mechanico-electrical systems

    Institute of Scientific and Technical Information of China (English)

    Liu Hong-Ji; Tang Yi-Fa; Fu Jing-Li

    2006-01-01

    The algebraic structure and Poisson's integral theory of mechanico-electrical systems are studied.The Hamilton canonical equations and generalized Hamilton canonical equations and their the contravariant algebraic forms for mechanico-electrical systems are obtained.The Lie algebraic structure and the Poisson's integral theory of Lagrange mechanico-electrical systems are derived.The Lie algebraic structure admitted and Poisson's integral theory of the Lagrange-Maxwell mechanico-electrical systems are presented.Two examples are presented to illustrate these results.

  6. Vehicle-to-Grid Power in Danish Electric Power Systems

    DEFF Research Database (Denmark)

    Pillai, Jayakrishnan Radhakrishna; Bak-Jensen, Birgitte

    2009-01-01

    The integration of renewable energy systems is often constrained by the variable nature of their output. This demands for the services of storing the electricity generated from most of the renewable energy sources. Vehicle-to-grid (V2G) power could use the inherent energy storage of electric...... vehicles and its quick response time to balance and stabilize a power system with fluctuating power. This paper outlines the use of battery electric vehicles in supporting large-scale integration of renewable energy in the Danish electric power systems. The reserve power requirements for a high renewable...... energy penetration could be met by an amount of V2G based electric vehicles less than 10% of the total vehicle need in Denmark. The participation of electric vehicle in ancillary services would earn significant revenues to the vehicle owner. The power balancing services of electric vehicles...

  7. Intelligent vehicle electrical power supply system with central coordinated protection

    Science.gov (United States)

    Yang, Diange; Kong, Weiwei; Li, Bing; Lian, Xiaomin

    2016-05-01

    The current research of vehicle electrical power supply system mainly focuses on electric vehicles (EV) and hybrid electric vehicles (HEV). The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect; electrical/electronic devices (EEDs) applied in vehicles are usually directly connected with the vehicle's battery. With increasing numbers of EEDs being applied in traditional fuel vehicles, vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively. In this paper, a new vehicle electrical power supply system for traditional fuel vehicles, which accounts for all electrical/electronic devices and complex work conditions, is proposed based on a smart electrical/electronic device (SEED) system. Working as an independent intelligent electrical power supply network, the proposed system is isolated from the electrical control module and communication network, and access to the vehicle system is made through a bus interface. This results in a clean controller power supply with no electromagnetic interference. A new practical battery state of charge (SoC) estimation method is also proposed to achieve more accurate SoC estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel. Optimized protection methods are also used to ensure power supply safety. Experiments and tests on a traditional fuel vehicle are performed, and the results reveal that the battery SoC is calculated quickly and sufficiently accurately for battery over-discharge protection. Over-current protection is achieved, and the entire vehicle's power utilization is optimized. For traditional fuel vehicles, the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture, enhancing system reliability and security.

  8. Intelligent Vehicle Electrical Power Supply System with Central Coordinated Protection

    Institute of Scientific and Technical Information of China (English)

    YANG Diange; KONG Weiwei; LI Bing; LIAN Xiaomin

    2016-01-01

    The current research of vehicle electrical power supply system mainly focuses on electric vehicles (EV) and hybrid electric vehicles (HEV). The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect;electrical/electronic devices (EEDs) applied in vehicles are usually directly connected with the vehicle’s battery. With increasing numbers of EEDs being applied in traditional fuel vehicles, vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively. In this paper, a new vehicle electrical power supply system for traditional fuel vehicles, which accounts for all electrical/electronic devices and complex work conditions, is proposed based on a smart electrical/electronic device (SEED) system. Working as an independent intelligent electrical power supply network, the proposed system is isolated from the electrical control module and communication network, and access to the vehicle system is made through a bus interface. This results in a clean controller power supply with no electromagnetic interference. A new practical battery state of charge (SoC) estimation method is also proposed to achieve more accurate SoC estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel. Optimized protection methods are also used to ensure power supply safety. Experiments and tests on a traditional fuel vehicle are performed, and the results reveal that the battery SoC is calculated quickly and sufficiently accurately for battery over-discharge protection. Over-current protection is achieved, and the entire vehicle’s power utilization is optimized. For traditional fuel vehicles, the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture, enhancing system reliability and security.

  9. Intelligent vehicle electrical power supply system with central coordinated protection

    Science.gov (United States)

    Yang, Diange; Kong, Weiwei; Li, Bing; Lian, Xiaomin

    2016-07-01

    The current research of vehicle electrical power supply system mainly focuses on electric vehicles (EV) and hybrid electric vehicles (HEV). The vehicle electrical power supply system used in traditional fuel vehicles is rather simple and imperfect; electrical/electronic devices (EEDs) applied in vehicles are usually directly connected with the vehicle's battery. With increasing numbers of EEDs being applied in traditional fuel vehicles, vehicle electrical power supply systems should be optimized and improved so that they can work more safely and more effectively. In this paper, a new vehicle electrical power supply system for traditional fuel vehicles, which accounts for all electrical/electronic devices and complex work conditions, is proposed based on a smart electrical/electronic device (SEED) system. Working as an independent intelligent electrical power supply network, the proposed system is isolated from the electrical control module and communication network, and access to the vehicle system is made through a bus interface. This results in a clean controller power supply with no electromagnetic interference. A new practical battery state of charge (SoC) estimation method is also proposed to achieve more accurate SoC estimation for lead-acid batteries in traditional fuel vehicles so that the intelligent power system can monitor the status of the battery for an over-current state in each power channel. Optimized protection methods are also used to ensure power supply safety. Experiments and tests on a traditional fuel vehicle are performed, and the results reveal that the battery SoC is calculated quickly and sufficiently accurately for battery over-discharge protection. Over-current protection is achieved, and the entire vehicle's power utilization is optimized. For traditional fuel vehicles, the proposed vehicle electrical power supply system is comprehensive and has a unified system architecture, enhancing system reliability and security.

  10. Cytogenetic characterization of the strongly electric Amazonian eel, Electrophorus electricus (Teleostei, Gymnotiformes, from the Brazilian rivers Amazon and Araguaia

    Directory of Open Access Journals (Sweden)

    Soraia B.A. Fonteles

    2008-01-01

    Full Text Available A karyotype analysis of the electric eel, Electrophorus electricus (Teleostei, Gymnotiformes, a strongly electric fish from northern South America, is presented. Two female specimens were analyzed, one from the Amazon River and one from the Araguaia River. The specimens had a chromosomal number of 2n = 52 (42M-SM + 10A. C-bands were present in a centromeric and pericentromeric position on part of the chromosomes; some interstitial C-bands were also present. Heteromorphic nucleolus organizer regions (NORs were detected in two chromosome pairs of the specimen from the Amazon River. The chromosome number and karyotype characteristics are similar to those of other Gymnotidae species. The genera Electrophorus and Gymnotus are positioned as the basal lineages in the Gymnotiformes phylogeny.

  11. The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah

    OpenAIRE

    Carvalho, M.T.M.

    2015-01-01

    Abstract Keywords: tropical Savannah, biochar, soil fertility, aerobic rice, grain yield, N2O emission Márcia Thaís de Melo Carvalho (2015). The impact of wood biochar as a soil amendment in aerobic rice systems of the Brazilian Savannah. PhD thesis, Wageningen University, The Netherlands, with summaries in English, Dutch and Portuguese,  160 pp. Rice is a staple food for 3 billion people in the world. In Brazil, rice is a traditional staple food mostly cultivated by smallh...

  12. Cost analysis of nucleic acid amplification for diagnosing pulmonary tuberculosis, within the context of the Brazilian Unified Health Care System

    OpenAIRE

    Márcia Pinto; Aline Piovezan Entringer; Ricardo Steffen; Anete Trajman

    2015-01-01

    ABSTRACT We estimated the costs of a molecular test for Mycobacterium tuberculosis and resistance to rifampin (Xpert MTB/RIF) and of smear microscopy, within the Brazilian Sistema Único de Saúde (SUS, Unified Health Care System). In SUS laboratories in the cities of Rio de Janeiro and Manaus, we performed activity-based costing and micro-costing. The mean unit costs for Xpert MTB/RIF and smear microscopy were R$35.57 and R$14.16, respectively. The major cost drivers for Xpert MTB/RIF and smea...

  13. Chaos in electric drive systems analysis control and application

    CERN Document Server

    Chau, K T

    2011-01-01

    In Chaos in Electric Drive Systems: Analysis, Control and Application authors Chau and Wang systematically introduce an emerging technology of electrical engineering that bridges abstract chaos theory and practical electric drives. The authors consolidate all important information in this interdisciplinary technology, including the fundamental concepts, mathematical modeling, theoretical analysis, computer simulation, and hardware implementation. The book provides comprehensive coverage of chaos in electric drive systems with three main parts: analysis, control and application. Corresponding drive systems range from the simplest to the latest types: DC, induction, synchronous reluctance, switched reluctance, and permanent magnet brushless drives.The first book to comprehensively treat chaos in electric drive systemsReviews chaos in various electrical engineering technologies and drive systemsPresents innovative approaches to stabilize and stimulate chaos in typical drivesDiscusses practical application of cha...

  14. Alternating Current All-electrical Gun Control System in Tanks

    OpenAIRE

    Zang Kemao; Ma Xiaojun; Li Changbing

    2004-01-01

    The ac all-electrical gun control system is composed of permanent magnetic synchronous machine-drive control systems and the ball-screw by replacing the complicated electrohydraulic systems. At the same time, the variable-structure system with sliding modes makes the gun control systems to have higher performances using the only rate flexure gyroscope. Thereby, vehicle hull gyroscope and angular gyroscope are left out.The new ac all-electrical gun control systems developed are reduced by 40 p...

  15. Generation potential of electric power surplus with the biogas produced from anaerobic bio digestion of vinasse in Brazilian sugar-ethanol industry; Potencial de geracao de excedentes de energia eletrica com o biogas produzido a partir da biodigestao da vinhaca na industria sucro-alcooleira brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Lamonica, Helcio Martins [Universidade Estadual de Campinas (DE/FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia

    2006-07-01

    This work evaluates the electric power potential of the Brazilian sugarcane industry using the biogas produced by vinasse biodigestion in internal combustion engine driven generators. The electric power surplus based on crop 2004/05 ethanol production data is 9,292 TJ/year (2.6 TWh/year), 0.75% of the total electric power consumption in Brazil during the year of 2003. In spite of its considerable potential the determined minimum selling price for its produced energy of R$ 89.98/GJ (R$ 323.92/MWh) is expensive for present Brazilian electric power market price. (author)

  16. A Comparative Study of the Brazilian Energy Labelling System and the Passivhaus Standard for Housing

    OpenAIRE

    Tubelo, Renata; Rodrigues, Lucelia; Gillott, Mark

    2014-01-01

    The ever-increasing energy demand of the residential sector has required the adoption of tighter energy standards, aiming for high energy efficiency in dwellings. In Brazil, 24 million new residential buildings are planned to be delivered by 2022 through social housing programs, which could greatly impact on the country’s energy consumption. In an attempt to minimize this impact, the Brazilian Labelling Scheme for Residential Buildings (RTQ-R label) was launched in 2010 as a voluntary standar...

  17. Treatment Outcomes in Tuberculosis Patients with Diabetes: A Polytomous Analysis Using Brazilian Surveillance System

    OpenAIRE

    Reis-Santos, Bárbara; Gomes, Teresa; Locatelli, Rodrigo; de Oliveira, Elizabete R.; Sanchez, Mauro N; Bernardo L Horta; Riley, Lee W.; Maciel, Ethel L

    2014-01-01

    Background The impact of non-communicable diseases on tuberculosis incidence has received significant attention. It has been suggested that the risk of tuberculosis is higher among subjects with diabetes and these subjects also has poor TB treatment outcomes.This study was aimed at assessing the socio-demographic and clinical factors that may influence different outcome of TB in patients with DM (TB-DM) identified in the Brazilian national database from 2001 to 2011. Methods TB-DM cases repor...

  18. Using sewerage system to generate electricity

    International Nuclear Information System (INIS)

    The development of the sanitary engineering has paralleled and contributed to the growth of the city. Without an adequate supply of safe water, the great city could not exist and life in it would be both unpleasant and dangerous unless human and other waste were promptly removed. The concentration of population in relatively small areas has made the task of sanitary engineer more complex. The cities, towns and villages are being polluted ground water and surface water. Industries also demand more and better water from all available sources. The rivers receive ever-increasing amount of sewage and industrial wastes and thus resulting more attention to the water treatment, stream pollution and complicated phenomena of self-purification. In many developing countries there is no such treatment plants for the sewerage water. Rivers receive large amount of polluted water and resulting many diseases. Thus self-purification and treatment plants playa vital role in sanitation. The other benefit is now introducing as Generating electricity from Sewerage System. (author)

  19. Operation of Modern Distribution Power Systems in Competitive Electricity Markets

    DEFF Research Database (Denmark)

    Hu, Weihao

    , DG units, loads and electricity price are studied. Further, the effect of energy storage systems will be considered, and an optimal operation strategy for energy storage devices in a large scale wind power system in the electricity market is proposed. The western Danish power system, which has large...... penetrations of variable wind power production and may represent the future electricity markets in some ways, is chosen as the studied power system. 10 year actual data from the Danish competitive electricity market are collected and analyzed. The relationship among the electricity price, the consumption...... strategy for trading wind power in the Danish short-term electricity market in order to minimize the imbalance costs for regulation. A load optimization method based on spot price for demand side management in Denmark is proposed in order to save the energy costs for 3 types of typical Danish consumers...

  20. Electrical Energy Storage for Renewable Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Helms, C. R.; Cho, K. J.; Ferraris, John; Balkus, Ken; Chabal, Yves; Gnade, Bruce; Rotea, Mario; Vasselli, John

    2012-08-31

    This program focused on development of the fundamental understanding necessary to significantly improve advanced battery and ultra-capacitor materials and systems to achieve significantly higher power and energy density on the one hand, and significantly lower cost on the other. This program spanned all the way from atomic-level theory, to new nanomaterials syntheses and characterization, to system modeling and bench-scale technology demonstration. Significant accomplishments are detailed in each section. Those particularly noteworthy include: • Transition metal silicate cathodes with 2x higher storage capacity than commercial cobalt oxide cathodes were demonstrated. • MnO₂ nanowires, which are a promising replacement for RuO₂, were synthesized • PAN-based carbon nanofibers were prepared and characterized with an energy density 30-times higher than current ultracapacitors on the market and comparable to lead-acid batteries • An optimization-based control strategy for real-time power management of battery storage in wind farms was developed and demonstrated. • PVDF films were developed with breakdown strengths of > 600MVm⁻¹, a maximum energy density of approximately 15 Jcm⁻³, and an average dielectric constant of 9.8 (±1.2). Capacitors made from these films can support a 10-year lifetime operating at an electric field of 200 MV m⁻¹. This program not only delivered significant advancements in fundamental understanding and new materials and technology, it also showcased the power of the cross-functional, multi-disciplinary teams at UT Dallas and UT Tyler for such work. These teams are continuing this work with other sources of funding from both industry and government.

  1. Reserve valuation in electric power systems

    Science.gov (United States)

    Ruiz, Pablo Ariel

    Operational reliability is provided in part by scheduling capacity in excess of the load forecast. This reserve capacity balances the uncertain power demand with the supply in real time and provides for equipment outages. Traditionally, reserve scheduling has been ensured by enforcing reserve requirements in the operations planning. An alternate approach is to employ a stochastic formulation, which allows the explicit modeling of the sources of uncertainty. This thesis compares stochastic and reserve methods and evaluates the benefits of a combined approach for the efficient management of uncertainty in the unit commitment problem. Numerical studies show that the unit commitment solutions obtained for the combined approach are robust and superior with respect to the traditional approach. These robust solutions are especially valuable in areas with a high proportion of wind power, as their built-in flexibility allows the dispatch of practically all the available wind power while minimizing the costs of operation. The scheduled reserve has an economic value since it reduces the outage costs. In several electricity markets, reserve demand functions have been implemented to take into account the value of reserve in the market clearing process. These often take the form of a step-down function at the reserve requirement level, and as such they may not appropriately represent the reserve value. The value of reserve is impacted by the reliability, dynamic and stochastic characteristics of system components, the system operation policies, and the economic aspects such as the risk preferences of the demand. In this thesis, these aspects are taken into account to approximate the reserve value and construct reserve demand functions. Illustrative examples show that the demand functions constructed have similarities with those implemented in some markets.

  2. Determination of Transmission Limits on Electric Power Systems

    Directory of Open Access Journals (Sweden)

    Castellanos-Bustamante Rafael

    2014-04-01

    Full Text Available This article provides the application of several methodologies to obtain power transmission limits through interties of the electric power systems to obtain a secure operation of the energy power system. Several aspects to obtain the maximum power flows of electrical energy thought of transmission lines on electrical grids are shown. Thermal limit of electrical conductors, loadability limit of transmission lines and small signal stability limits are obtained for several interties between geographical regions. It also, shows the application of a load shedding scheme to stabilize an interarea oscillation mode. The model of the Mexican Interconnected power System is used to illustrate these methodologies.

  3. A generalization information management system applied to electrical distribution

    Energy Technology Data Exchange (ETDEWEB)

    Geisler, K.I.; Neumann, S.A.; Nielsen, T.D.; Bower, P.K. (Empros Systems International (US)); Hughes, B.A.

    1990-07-01

    This article presents a system solution approach that meets the requirements being imposed by industry trends and the electric utility customer. Specifically, the solution addresses electric distribution management systems. Electrical distribution management is a particularly well suited area of application because it involves a high diversity of tasks, which are currently supported by a proliferation of automated islands. Islands of automation which currently exist include (among others) distribution operations, load management, automated mapping, facility management, work order processing, and planning.

  4. Multiagent based protection and control in decentralized electric power systems

    DEFF Research Database (Denmark)

    Saleem, Arshad; Lind, Morten; Veloso, Manuela

    2010-01-01

    Electric power systems are going through a major change both in their physical and control structure. A large num- ber of small and geographically dispersed power generation units (e.g., wind turbines, solar cells, plug-in electric cars) are replacing big centralized power plants. This shift has...... created interesting possibilities for application of intelligent systems such as multiagent systems for control and automation in electric power systems. This paper describes work on designing a multiagent system for protection and control of electric power distribution networks.It demonstrates how...... explicit modeling of capabilities, states, roles and role transition in agents can capture the control and automation in electric power systems. We present illustrative results from using our proposed schema in realistic simulations....

  5. Electrical Cerebral Stimulation Modifies Inhibitory Systems

    Science.gov (United States)

    Cuéllar-Herrera, M.; Rocha, L.

    2003-09-01

    Electrical stimulation of the nervous tissue has been proposed as a method to treat some neurological disorders, such as epilepsy. Epileptic seizures result from excessive, synchronous, abnormal firing patterns of neurons that are located predominantly in the cerebral cortex. Many people with epilepsy continue presenting seizures even though they are under regimens of antiepileptic medications. An alternative therapy for treatment resistant epilepsy is cerebral electrical stimulation. The present study is focused to review the effects of different types of electrical stimulation and specifically changes in amino acids.

  6. Analysis of electric machinery and drive systems

    CERN Document Server

    Krause, Paul C; Sudhoff, Scott D; Pekarek, Steven

    2013-01-01

    Introducing a new edition of the popular reference on machine analysis Now in a fully revised and expanded edition, this widely used reference on machine analysis boasts many changes designed to address the varied needs of engineers in the electric machinery, electric drives, and electric power industries. The authors draw on their own extensive research efforts, bringing all topics up to date and outlining a variety of new approaches they have developed over the past decade. Focusing on reference frame theory that has been at the core of this work since the first edition, th

  7. Battery Health Management System for Electric UAVs

    Data.gov (United States)

    National Aeronautics and Space Administration — In summary, this paper lays out a novel battery health management technique for application onboard an electric UAV. This technique is also applicable to other...

  8. A Future with Hybrid Electric Propulsion Systems: A NASA Perspective

    Science.gov (United States)

    DelRosario, Ruben

    2014-01-01

    The presentation highlights a NASA perspective on Hybrid Electric Propulsion Systems for aeronautical applications. Discussed are results from NASA Advance Concepts Study for Aircraft Entering service in 2030 and beyond and the potential use of hybrid electric propulsion systems as a potential solution to the requirements for energy efficiency and environmental compatibility. Current progress and notional potential NASA research plans are presented.

  9. 75 FR 14097 - Revision to Electric Reliability Organization Definition of Bulk Electric System

    Science.gov (United States)

    2010-03-24

    ... Environmental Policy Act, Order No. 486, 52 FR 47897 (Dec. 17, 1987), FERC Stats. & Regs., Regs. Preambles 1986...; ] DEPARTMENT OF ENERGY Federal Energy Regulatory Commission 18 CFR Part 40 61,204] Revision to Electric Reliability Organization Definition of Bulk Electric System March 18, 2010. AGENCY: Federal Energy...

  10. A COMPARISON OF THE CLASS ACTION FOR DAMAGES IN THE AMERICAN JUDICIAL SYSTEM TO THE BRAZILIAN CLASS ACTION: THE REQUIREMENTS OF ADMISSIBILITY

    Directory of Open Access Journals (Sweden)

    A. P. Grinover

    2015-01-01

    Full Text Available After describing the class action for damages in the American judicial system, with the requisites of ‘prevalence’ and ‘superiority,’ the study passes to the examiner of the requirements of the admissibility of the Brazilian class action for damages, concluding on the existence of the same requisites, even in a civil law system.

  11. Advanced Electrical Machines and Machine-Based Systems for Electric and Hybrid Vehicles

    Directory of Open Access Journals (Sweden)

    Ming Cheng

    2015-09-01

    Full Text Available The paper presents a number of advanced solutions on electric machines and machine-based systems for the powertrain of electric vehicles (EVs. Two types of systems are considered, namely the drive systems designated to the EV propulsion and the power split devices utilized in the popular series-parallel hybrid electric vehicle architecture. After reviewing the main requirements for the electric drive systems, the paper illustrates advanced electric machine topologies, including a stator permanent magnet (stator-PM motor, a hybrid-excitation motor, a flux memory motor and a redundant motor structure. Then, it illustrates advanced electric drive systems, such as the magnetic-geared in-wheel drive and the integrated starter generator (ISG. Finally, three machine-based implementations of the power split devices are expounded, built up around the dual-rotor PM machine, the dual-stator PM brushless machine and the magnetic-geared dual-rotor machine. As a conclusion, the development trends in the field of electric machines and machine-based systems for EVs are summarized.

  12. A Decision Support System for Sizing the Call Center of an Electrical Power Distributor

    OpenAIRE

    Adiel Teixeira de Almeida Filho; Ana Paula Henriques de Gusmão; Thárcylla Clemente; Jadielson Moura; Ana Paula Cabral Seixas Costa; Adiel Teixeira de Almeida

    2014-01-01

    Sizing the capacity of a call center is a well known problem. However, in some cases there are regulatory aspects that must be observed that, combined with specificities of the service provided and how it operates, affects the manner of the process for forecasting the inbound call rate and decisions on sizing capacity. This paper presents a real problem relating to several electric power distributors in Brazil regulated by ANEEL (the Brazilian regulatory agency for electric power companies). ...

  13. PCA Fault Feature Extraction in Complex Electric Power Systems

    Directory of Open Access Journals (Sweden)

    ZHANG, J.

    2010-08-01

    Full Text Available Electric power system is one of the most complex artificial systems in the world. The complexity is determined by its characteristics about constitution, configuration, operation, organization, etc. The fault in electric power system cannot be completely avoided. When electric power system operates from normal state to failure or abnormal, its electric quantities (current, voltage and angles, etc. may change significantly. Our researches indicate that the variable with the biggest coefficient in principal component usually corresponds to the fault. Therefore, utilizing real-time measurements of phasor measurement unit, based on principal components analysis technology, we have extracted successfully the distinct features of fault component. Of course, because of the complexity of different types of faults in electric power system, there still exists enormous problems need a close and intensive study.

  14. Low Health System Performance, Indigenous Status and Antivenom Underdosage Correlate with Spider Envenoming Severity in the Remote Brazilian Amazon

    Science.gov (United States)

    Sampaio, Vanderson Souza; Gomes, André Alexandre; Silva, Iran Mendonça; Sachett, Jacqueline; Ferreira, Luiz Carlos Lima; Oliveira, Sâmella; Sabidò, Meritxell; Chalkidis, Hipócrates; Barbosa Guerra, Maria Graças Vale; Salinas, Jorge Luis; Wen, Fan Hui; Lacerda, Marcus Vinícius Guimarães; Monteiro, Wuelton Marcelo

    2016-01-01

    Background A better knowledge of the burden and risk factors associated with severity due to spider bites would lead to improved management with a reduction of sequelae usually seen for this neglected health problem, and would ensure proper use of antivenoms in remote localities in the Brazilian Amazon. The aim of this study was to analyze the profile of spider bites reported in the state of Amazonas in the Western Brazilian Amazon, and to investigate potential risk factors associated with severity of envenomation. Methodology/Principal Findings We used a case-control study in order to identify factors associated with spider bite severity in the Western Brazilian Amazon from 2007 to 2014. Patients evolving to any severity criteria were considered cases and those with non-severe bites were included in the control group. All variables were retrieved from the official Brazilian reporting systems. Socioeconomical and environmental components were also included in a multivariable analysis in order to identify ecological determinants of incidence and severity. A total of 1,181 spider bites were recorded, resulting in an incidence of 4 cases per 100,000 person/year. Most of the spider bites occurred in males (65.8%). Bites mostly occurred in rural areas (59.5%). The most affected age group was between 16 and 45 years old (50.9%). A proportion of 39.7% of the bites were related to work activities. Antivenom was prescribed to 39% of the patients. Envenomings recorded from urban areas [Odds ratio (OR) = 0.40 (95%CI = 0.30–0.71; pmedian [OR = 0.64 (95%CI = 0.39–0.75; p300 km away from the state capital Manaus [OR = 1.90 (95%CI = 1.28–2.40; p300 km away from the state capital Manaus [OR = 1.53 (95%CI = 1.15–2.02; p = 0.003)] and living in a municipality with a MHSPI 300 km away from the state capital Manaus could be contributing factors to higher severity of spider envenomings in this area, as well as to antivenom underdosage. PMID:27227455

  15. Probabilistic Model-Based Diagnosis for Electrical Power Systems

    Data.gov (United States)

    National Aeronautics and Space Administration — We present in this article a case study of the probabilistic approach to model-based diagnosis. Here, the diagnosed system is a real-world electrical power system,...

  16. Electric Bike Sharing--System Requirements and Operational Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Cherry, Christopher; Worley, Stacy; Jordan, David

    2010-08-01

    Bike sharing is an exciting new model of public-private transportation provision that has quickly emerged in the past five years. Technological advances have overcome hurdles of early systems and cities throughout the globe are adopting this model of transportation service. Electric bikes have simultaneously gained popularity in many regions of the world and some have suggested that shared electric bikes could provide an even higher level of service compared to existing systems. There are several challenges that are unique to shared electric bikes: electric-assisted range, recharging protocol, and bike and battery checkout procedures. This paper outlines system requirements to successfully develop and deploy an electric bike sharing system, focusing on system architecture, operational concepts, and battery management. Although there is little empirical evidence, electric bike sharing could be feasible, depending on demand and battery management, and can potentially improve the utility of existing bike sharing systems. Under most documented bike sharing use scenarios, electric bike battery capacity is insufficient for a full day of operation, depending on recharging protocol. Off-board battery management is a promising solution to address this problem. Off-board battery management can also support solar recharging. Future pilot tests will be important and allow empirical evaluation of electric bikesharing system performance. (auth)

  17. Analysis of normative requirements for the development and implementation of a quality management system in Brazilian nuclear installations and activities

    International Nuclear Information System (INIS)

    The present work identifies, characterizes and analyses the normative requirements for the development and implementation of quality management systems in Brazilian nuclear installations and activities. The requirements established in standards IAEA GS-R-3, IAEA GS-G-3.1, IAEA DS 349, NBR ISO 9001:2000 e CNEN-NN-1.16 are critically analyzed. A correlation matrix of the applicable standards is presented and the related topics among them are identified. The standards IAEA GS-R-3, IAEA GS-G-3.1 and IAEA DS 349 define general requirements for establishing, implementing, assessing and continually improving an integrated management system in nuclear installations and activities, in IAEA member countries. The standard NBR ISO 9001:2000 establishes general requirements for the implementation of a quality management system in all kinds of organizations. The standard CNEN NN-1.16 establishes the regulating requirements for the quality assurance systems and programs of nuclear installations, for licensing and authorization for operation of these installations in Brazil. The standard IAEA GS-R-3 that replaces the code IAEA 50-C-Q introduces the concept of 'Integrated Management System' for the nuclear area, in preference to the concepts of 'Quality Assurance' and 'Quality Management'. This new approach is aligned with the current tendency incorporating requirements of quality, safety, health, environment, security, economics and other in a unique management system. Examples of quality management systems implemented by Brazilian nuclear organizations and by nuclear organizations outside Brazil are analyzed and considered in the discussion of results. (author)

  18. Ambivalent implications of health care information systems: a study in the Brazilian public health care system

    Directory of Open Access Journals (Sweden)

    João Porto de Albuquerque

    2011-01-01

    Full Text Available This article evaluates social implications of the "SIGA" Health Care Information System (HIS in a public health care organization in the city of São Paulo. The evaluation was performed by means of an in-depth case study with patients and staff of a public health care organization, using qualitative and quantitative data. On the one hand, the system had consequences perceived as positive such as improved convenience and democratization of specialized treatment for patients and improvements in work organization. On the other hand, negative outcomes were reported, like difficulties faced by employees due to little familiarity with IT and an increase in the time needed to schedule appointments. Results show the ambiguity of the implications of HIS in developing countries, emphasizing the need for a more nuanced view of the evaluation of failures and successes and the importance of social contextual factors.

  19. Electricity for Road Transport, Flexible Power Systems and Wind Power

    DEFF Research Database (Denmark)

    Nielsen, Lars Henrik; Ravn, Hans; Meibom, Peter;

    The aim of the project is to analyse the potential synergistic interplay that may arise between the power sector and the transport sector, if parts of the road transport energy needs are based on electricity via the utilisation of plug-in hybrid electric vehicles and pure electric vehicles...... (transmission and distribution) as consequence of increasing electricity demand, and new flexible consumption patterns from segments in the transport sector, and as consequence of increasing capacity on wind power in the system. 6: Setting up and analysis of combined scenarios covering both the heat and power....... The project focuses on the technical elements in the chain that comprises: 1: The electric vehicle status, potentials and expected development. Electric batteries are in focus in this part of the analysis. 2: Analysis of plug-in hybrid electric vehicle interacting with a local grid. 3: Analysis of grid...

  20. A complete electrical hazard classification system and its application

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, Lloyd B [Los Alamos National Laboratory; Cartelli, Laura [Los Alamos National Laboratory

    2009-01-01

    The Standard for Electrical Safety in the Workplace, NFPA 70E, and relevant OSHA electrical safety standards evolved to address the hazards of 60-Hz power that are faced primarily by electricians, linemen, and others performing facility and utility work. This leaves a substantial gap in the management of electrical hazards in Research and Development (R&D) and specialized high voltage and high power equipment. Examples include lasers, accelerators, capacitor banks, electroplating systems, induction and dielectric heating systems, etc. Although all such systems are fed by 50/60 Hz alternating current (ac) power, we find substantial use of direct current (dc) electrical energy, and the use of capacitors, inductors, batteries, and radiofrequency (RF) power. The electrical hazards of these forms of electricity and their systems are different than for 50160 Hz power. Over the past 10 years there has been an effort to develop a method of classifying all of the electrical hazards found in all types of R&D and utilization equipment. Examples of the variation of these hazards from NFPA 70E include (a) high voltage can be harmless, if the available current is sufficiently low, (b) low voltage can be harmful if the available current/power is high, (c) high voltage capacitor hazards are unique and include severe reflex action, affects on the heart, and tissue damage, and (d) arc flash hazard analysis for dc and capacitor systems are not provided in existing standards. This work has led to a comprehensive electrical hazard classification system that is based on various research conducted over the past 100 years, on analysis of such systems in R&D, and on decades of experience. Initially, national electrical safety codes required the qualified worker only to know the source voltage to determine the shock hazard. Later, as arc flash hazards were understood, the fault current and clearing time were needed. These items are still insufficient to fully characterize all types of

  1. Thermionic reactor systems for electric propulsion.

    Science.gov (United States)

    Mondt, J. F.

    1972-01-01

    This paper summarizes the preliminary design studies of unmanned electric propulsion spacecraft, with primary emphasis on the in-core thermionic reactor power subsystem. A 70-kWe power subsystem, with an external-fuel thermionic reactor, is shown integrated into a large L/D (about 20) electric propulsion spacecraft. The 70-kWe spacecraft is designed for launch to earth escape with a Titan-Centaur. Two 300-kWe reactor designs (external-fuel and flashlight designs from Atomic Energy Commission contracted studies) are integrated into 270-kWe electric propulsion spacecraft. The 270-kWe spacecraft are designed for launch to a 700-nmi earth orbit with a Titan III-C/7 booster. The 70-kWe thermionic reactor power subsystem is also conceptually shown as a space base power plant.

  2. Electrical stimulation systems for cardiac tissue engineering.

    Science.gov (United States)

    Tandon, Nina; Cannizzaro, Christopher; Chao, Pen-Hsiu Grace; Maidhof, Robert; Marsano, Anna; Au, Hoi Ting Heidi; Radisic, Milica; Vunjak-Novakovic, Gordana

    2009-01-01

    We describe a protocol for tissue engineering of synchronously contractile cardiac constructs by culturing cardiac cells with the application of pulsatile electrical fields designed to mimic those present in the native heart. Tissue culture is conducted in a customized chamber built to allow for cultivation of (i) engineered three-dimensional (3D) cardiac tissue constructs, (ii) cell monolayers on flat substrates or (iii) cells on patterned substrates. This also allows for analysis of the individual and interactive effects of pulsatile electrical field stimulation and substrate topography on cell differentiation and assembly. The protocol is designed to allow for delivery of predictable electrical field stimuli to cells, monitoring environmental parameters, and assessment of cell and tissue responses. The duration of the protocol is 5 d for two-dimensional cultures and 10 d for 3D cultures.

  3. Optimal Operation of Electric Vehicles in Competitive Electricity Markets and Its Impact on Distribution Power Systems

    DEFF Research Database (Denmark)

    Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

    2011-01-01

    operation strategy for a Plug-In Electric Vehicle (PEV) in relation to the hourly electricity price in order to achieve minimum energy costs of the PEV. The western Danish power system, which is currently the grid area in the world that has the largest share of wind power in its generation profiles and may...... represent the future of electricity markets in some ways, is chosen as the studied power system in this paper. The impact of the optimal operation strategy for electric vehicles together with the optimal load response to spot market price on the distribution power system with high wind power penetrations...... are also discussed in the paper. Simulation results show that the proposed optimal operation strategy is an effective measure to achieve minimum energy costs of the PEV. The optimal operation strategy of the PEV and the optimal load response may have significant effects on the distribution power system...

  4. The generation expansion planning of the Brazilian electric sector employing genetic algorithms; O planejamento da expansao da geracao do setor eletrico brasileiro utilizando os algoritmos geneticos

    Energy Technology Data Exchange (ETDEWEB)

    Kazay, Heloisa Firmo

    2001-07-01

    The generation expansion-planning problem is a non-linear large-scale optimisation problem, which is even larger when it refers to the Brazilian system, and when one considers the multiple intervening uncertainty sources. To handle the complexity of the problem, decomposition schemes have been used. Usually, such schemes divide the expansion problem into two sub-problems: one related to the construction of new plants (investment sub-problem) and another dealing with the task of operating the system (operation sub-problem). This thesis proposes a genetic algorithm to solve the investment sub-problem. Initially, an analysis of the state of the art on the generation expansion planning and the field of the genetic algorithms are presented. Then follows a practical application of the proposed algorithm in a model of generation expansion planning under uncertainty. Finally, the results obtained in two case studies are presented and analysed. These results indicate that the proposed genetic algorithm is an effective alternative to the solution of the investment sub-problem. (author)

  5. Design of electric vehicle propulsion system incorporating flywheel energy storage

    OpenAIRE

    Dhand, Aditya

    2015-01-01

    Battery electric vehicles are crucial for moving towards a zero emission transport system. Though battery electric vehicle technology has been rapidly improving, it is still not competitive to the conventional vehicles in terms of both cost and performance. The limited driving range and high cost are significant impediments to the popularity of battery electric vehicles. The battery is the main element which affects the range and cost of the vehicle. The battery has to meet the requirements o...

  6. Intelligent Electric Power Systems with Active-Adaptive Electric Networks: Challenges for Simulation Tools

    Directory of Open Access Journals (Sweden)

    Ufa Ruslan A.

    2015-01-01

    Full Text Available The motivation of the presented research is based on the needs for development of new methods and tools for adequate simulation of intelligent electric power systems with active-adaptive electric networks (IES including Flexible Alternating Current Transmission System (FACTS devices. The key requirements for the simulation were formed. The presented analysis of simulation results of IES confirms the need to use a hybrid modelling approach.

  7. Electricity for road transport, flexible power systems and wind power

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Lars Henrik; Ravn, H.; Meibom, P. (and others)

    2011-12-15

    The aim of the project is to analyse the potential synergistic interplay that may arise between the power sector and the transport sector, if parts of the road transport energy needs are based on electricity via the utilisation of plug-in hybrid electric vehicles and pure electric vehicles. The project focuses on the technical elements in the chain that comprises: 1: The electric vehicle status, potentials and expected development. Electric batteries are in focus in this part of the analysis. 2: Analysis of plug-in hybrid electric vehicle interacting with a local grid. 3: Analysis of grid-vehicle connection systems including technical regulation options and analysis of needs for standardisation. 4: Setting up scenarios covering potential developments for utilizing electric drive trains in road transport. Period: Up to year 2030. 5: Analysis of capacity constraints in the electricity grid (transmission and distribution) as consequence of increasing electricity demand, and new flexible consumption patterns from segments in the transport sector, and as consequence of increasing capacity on wind power in the system. 6: Setting up and analysis of combined scenarios covering both the heat and power system and the transport sector. (Author)

  8. Evaluation of anthropic influences in an estuarine system of Southeastern Brazilian Coast by applying enrichment factors

    Directory of Open Access Journals (Sweden)

    Goncalves C.

    2013-04-01

    Full Text Available This study presents an evaluation of metals and As deposition in the Bertioga Channel (Santos Region, Southeastern Brazilian coast along the last 150 years, which corresponds to the main anthropogenic activity in the area. The studied area is located in the so-called Baixada Santista, where the main Brazilian harbor and one of the most important industrial centers of the country are located. This work consisted of sampling five sediment cores along this channel. The cores were sliced every 2 cm, and the samples were analyzed by ICP-OES to determine the levels of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn and As. The enrichment factors (EF were calculated to identify the relative heavy-metal toxicity of the sediments and the anthropogenic contribution of the investigated elements. EFs indicated the absence of contamination for the heavy metals but a higher input of As in two cores (B2 and B5. According to the age models of the cores, this enrichment corresponds to the end of the 19th century, when Santos harbor was inaugurated, and to the 1970s, when Santos harbor activities expanded.

  9. Resources transfer and centralization in Brazilian electrical sector: the reversion global reserve (RGR) and the guarantee global reserve (GGR); Centralizacao e transferencia de recursos no setor eletrico brasileiro: a reserva global de reversao (RGR) e a reserva global de garantia (RGG)

    Energy Technology Data Exchange (ETDEWEB)

    Souza Amaral Filho, J.B. de

    1991-12-31

    This dissertation makes the analysis of resources transfer and centralization in Brazilian electrical sector, through reversion global reserve (RGR) and guarantee global reserve (GGR). RGR and GGR are funds. RGR finances sectorial investments in electric power and GGR aims the supply of deficient concessionaires. Governmental investments and the results of this application are showing. (M.V.M.). 55 refs, 2 figs, 61 tabs.

  10. Monitoring and analyzing features of electrical power quality system performance

    Directory of Open Access Journals (Sweden)

    Genci Sharko

    2010-06-01

    Full Text Available Power quality is a set of boundaries that allows electrical systems to function in their intended manner without significant loss of performance or life. The term is used to describe electric power that drives an electrical load and the load's ability to function properly with that electric power. Without the proper quality of the power, an electrical device may malfunction, fail prematurely or not operate at all. There are many reasons why the electric power can be of poor quality and many more causes of such poor quality power. Power quality of power systems, which affects all connected electrical and electronic equipment, is a measure of deviations in voltages, currents, frequency, temperatures, winding forces and torques of particular supply systems and their components. In recent years, a considerable increase in nonlinear loads has been experienced; in particular distributed loads, such as computers, monitors and lighting, and distributed sources. The aim of this paper is to display a way of monitoring and analyzing features of electrical power quality system. As a monitoring example is taken output from power transformer rated at 320 kVA, part of distribution grid of Durres City in Albania.

  11. Modern Solutions for Automation of Electrical Traction Power Supply Systems

    OpenAIRE

    Ana Mihaela Andreica

    2011-01-01

    This paper presents modern solutions for the automation of the electrical traction power supply system used in urban public transport (trams, trolleybuses and subway trains). The monitoring and control of this process uses SCADA distributed architectures, grouped around a central point (dispatcher) who controls all field sensors, transmitters and actuators using programmable logical controllers. The presented applications refer to the Bucharest electrical transport infrastru...

  12. Electrical insulation systems for the ITER CS modules

    Science.gov (United States)

    Reed, R. P.; Martovetsky, N. N.

    2014-01-01

    For the U.S. fabricated ITER Central Solenoid (CS), six, almost identical, modules will be fabricated, then stacked together. The electrical insulation systems of the CS modules consist of turn, layer, and ground insulation. These electrical systems also serve to bond the coil conductors together. For this purpose, an epoxy resin is transferred into the coil assembly using a carefully designed vacuum-pressure impregnation process. The most important testing procedures, data, and design criteria for the key low-temperature, mechanical, and electrical properties are reviewed. Design of these systems is discussed.

  13. The rise of Brazilian agriculture

    DEFF Research Database (Denmark)

    Jensen, Hans Grinsted; Vink, Nick; Sandrey, Ron

    2014-01-01

    The purpose of this article is to explore some of the possible lessons for South African agriculture from the Brazilian experience. To this end, the article discusses the performance of Brazilian agriculture in terms of land and labour use, production, and exports. This is followed by aspects...... of Brazilian agricultural policies, namely farmer support, the research and technology transfer system and land issues. The implications for South African agriculture can be summarized as the recognition that history, geography, the development path and agricultural policies all matter. The article...... then identifies five important lessons for agricultural development in South Africa....

  14. Ash reduction system using electrically heated particulate matter filter

    Science.gov (United States)

    Gonze, Eugene V [Pinckney, MI; Paratore, Jr., Michael J; He, Yongsheng [Sterling Heights, MI

    2011-08-16

    A control system for reducing ash comprises a temperature estimator module that estimates a temperature of an electrically heated particulate matter (PM) filter. A temperature and position estimator module estimates a position and temperature of an oxidation wave within the electrically heated PM filter. An ash reduction control module adjusts at least one of exhaust flow, fuel and oxygen levels in the electrically heated PM filter to adjust a position of the oxidation wave within the electrically heated PM filter based on the oxidation wave temperature and position.

  15. Electrical stimuli in the central nervous system microenvironment.

    Science.gov (United States)

    Thompson, Deanna M; Koppes, Abigail N; Hardy, John G; Schmidt, Christine E

    2014-07-11

    Electrical stimulation to manipulate the central nervous system (CNS) has been applied as early as the 1750s to produce visual sensations of light. Deep brain stimulation (DBS), cochlear implants, visual prosthetics, and functional electrical stimulation (FES) are being applied in the clinic to treat a wide array of neurological diseases, disorders, and injuries. This review describes the history of electrical stimulation of the CNS microenvironment; recent advances in electrical stimulation of the CNS, including DBS to treat essential tremor, Parkinson's disease, and depression; FES for the treatment of spinal cord injuries; and alternative electrical devices to restore vision and hearing via neuroprosthetics (retinal and cochlear implants). It also discusses the role of electrical cues during development and following injury and, importantly, manipulation of these endogenous cues to support regeneration of neural tissue. PMID:25014787

  16. Belleville powerhouse electrical systems and controls

    Energy Technology Data Exchange (ETDEWEB)

    Clemen, D.M. [Harza Engineering Co., Chicago, IL (United States)

    1995-12-31

    The 42 MW Belleville Hydroelectric Project is a run-of-river plant located on the West Virginia side of the existing Corps of Engineers Belleville Lock and Dam on the Ohio River. The plant consists of two 21 MW bulb units with 7.3 meter diameter runners manufactured by Voest Alpine Machinery Construction Engineering (VAMCE). The plant will generate approximately 245 GWhr of electricity each year. Many unique features associated with the electrical power equipment at the Belleville Hydroelectric Project are a direct result of the FERC license requirement that allows flood waters to run over the top of the powerhouse. Consequently, no exterior decks, roofs, or adjacent lands were available as equipment areas for the Generator Step-Up (GSU) transformers or the 138 kV SF6 substation.

  17. TWRS privatization phase 1 electrical power system

    Energy Technology Data Exchange (ETDEWEB)

    Singh, G.

    1997-05-30

    This document includes Conceptual Design Report (CDR) for a new 11 km (7 miles) 230 kV transmission line and a new 40 MVA substation (A6) which will be located east of Grout Facility in 200E Area tank farm. This substation will provide electrical power up to 20 MW each for two private contractor facilities for immobilization and disposal of low activity waste (LAW).

  18. Power quality load management for large spacecraft electrical power systems

    Science.gov (United States)

    Lollar, Louis F.

    1988-01-01

    In December, 1986, a Center Director's Discretionary Fund (CDDF) proposal was granted to study power system control techniques in large space electrical power systems. Presented are the accomplishments in the area of power system control by power quality load management. In addition, information concerning the distortion problems in a 20 kHz ac power system is presented.

  19. Alternative electrical transmission systems and their environmental impact

    Energy Technology Data Exchange (ETDEWEB)

    Schiefelbein, G.F.

    1977-08-01

    A general description is provided of electrical transmission systems as an aid in determining their environmental impacts. Alternating current, direct current, overhead systems, underground systems, and water crossings are treated. The cost, performance, reliability, safety, and environmental impact of these systems are compared.

  20. The Brazilian experience of incentive of renewable sources expansion by means of electric power auctions; A experiencia brasileira de incentivo a expansao das fontes renovaveis por meio de leiloes de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Viana, Alexandre Guedes [Camara de Comercializacao de Energia Eletrica (CCEE), Sao Paulo, SP (Brazil); Parente, Virginia [Universidade de Sao Paulo (USP), SP (Brazil)

    2010-07-01

    The aim of this paper is to present the Brazilian experience to encourage renewable sources of power generation through the auctions into the Regulated Environment of Contracting. These auctions are subdivided into auctions of existing plants, new plants, alternative sources and structural plants. In this process we observe the structure of the mechanism for contracting new projects of renewable sources without neglecting the low tariffs issues. Thus, the auctions of electricity in Brazil is an alternative to be considered in an attempt to group market mechanisms, low tariffs and incentives to renewable sources of generation. (author)

  1. [Nutritional challenges in the Brazilian Unified National Health System for building the interface between health and food and nutritional security].

    Science.gov (United States)

    Rigon, Silvia do Amaral; Schmidt, Suely Teresinha; Bógus, Cláudia Maria

    2016-03-01

    This article discusses the establishment of inter-sector action between health and food and nutritional security in Brazil from 2003 to 2010, when this issue was launched as a priority on the government's agenda. A qualitative study was developed according to constructivist epistemology, using key-informant interviews in the field's nationwide social oversight body. Advances and challenges in this process are addressed as analytical categories. The National Food and Nutrition Policy (PNAN) was mentioned as the link between the two fields, decentralized through a network with activity in the states and municipalities. However, the study found political, institutional, and operational obstacles to the effective implementation of the PNAN in the Brazilian Unified National Health System and consequently to a contribution to the advancement of Health and Food and Nutritional Security in the country. The predominance of the biomedical, curative, and high-complexity model was cited as the principal impediment, while health promotion policies like the PNAN were assigned secondary priority.

  2. Cost analysis of nucleic acid amplification for diagnosing pulmonary tuberculosis, within the context of the Brazilian Unified Health Care System.

    Science.gov (United States)

    Pinto, Márcia; Entringer, Aline Piovezan; Steffen, Ricardo; Trajman, Anete

    2015-01-01

    We estimated the costs of a molecular test for Mycobacterium tuberculosis and resistance to rifampin (Xpert MTB/RIF) and of smear microscopy, within the Brazilian Sistema Único de Saúde (SUS, Unified Health Care System). In SUS laboratories in the cities of Rio de Janeiro and Manaus, we performed activity-based costing and micro-costing. The mean unit costs for Xpert MTB/RIF and smear microscopy were R$35.57 and R$14.16, respectively. The major cost drivers for Xpert MTB/RIF and smear microscopy were consumables/reagents and staff, respectively. These results might facilitate future cost-effectiveness studies and inform the decision-making process regarding the expansion of Xpert MTB/RIF use in Brazil. PMID:26785963

  3. Cost analysis of nucleic acid amplification for diagnosing pulmonary tuberculosis, within the context of the Brazilian Unified Health Care System.

    Science.gov (United States)

    Pinto, Márcia; Entringer, Aline Piovezan; Steffen, Ricardo; Trajman, Anete

    2015-01-01

    We estimated the costs of a molecular test for Mycobacterium tuberculosis and resistance to rifampin (Xpert MTB/RIF) and of smear microscopy, within the Brazilian Sistema Único de Saúde (SUS, Unified Health Care System). In SUS laboratories in the cities of Rio de Janeiro and Manaus, we performed activity-based costing and micro-costing. The mean unit costs for Xpert MTB/RIF and smear microscopy were R$35.57 and R$14.16, respectively. The major cost drivers for Xpert MTB/RIF and smear microscopy were consumables/reagents and staff, respectively. These results might facilitate future cost-effectiveness studies and inform the decision-making process regarding the expansion of Xpert MTB/RIF use in Brazil.

  4. Cost analysis of nucleic acid amplification for diagnosing pulmonary tuberculosis, within the context of the Brazilian Unified Health Care System

    Directory of Open Access Journals (Sweden)

    Márcia Pinto

    2015-12-01

    Full Text Available ABSTRACT We estimated the costs of a molecular test for Mycobacterium tuberculosis and resistance to rifampin (Xpert MTB/RIF and of smear microscopy, within the Brazilian Sistema Único de Saúde (SUS, Unified Health Care System. In SUS laboratories in the cities of Rio de Janeiro and Manaus, we performed activity-based costing and micro-costing. The mean unit costs for Xpert MTB/RIF and smear microscopy were R$35.57 and R$14.16, respectively. The major cost drivers for Xpert MTB/RIF and smear microscopy were consumables/reagents and staff, respectively. These results might facilitate future cost-effectiveness studies and inform the decision-making process regarding the expansion of Xpert MTB/RIF use in Brazil.

  5. Cost analysis of nucleic acid amplification for diagnosing pulmonary tuberculosis, within the context of the Brazilian Unified Health Care System

    Science.gov (United States)

    Pinto, Márcia; Entringer, Aline Piovezan; Steffen, Ricardo; Trajman, Anete

    2015-01-01

    ABSTRACT We estimated the costs of a molecular test for Mycobacterium tuberculosis and resistance to rifampin (Xpert MTB/RIF) and of smear microscopy, within the Brazilian Sistema Único de Saúde (SUS, Unified Health Care System). In SUS laboratories in the cities of Rio de Janeiro and Manaus, we performed activity-based costing and micro-costing. The mean unit costs for Xpert MTB/RIF and smear microscopy were R$35.57 and R$14.16, respectively. The major cost drivers for Xpert MTB/RIF and smear microscopy were consumables/reagents and staff, respectively. These results might facilitate future cost-effectiveness studies and inform the decision-making process regarding the expansion of Xpert MTB/RIF use in Brazil. PMID:26785963

  6. An Electric taxi fleet charging system using second life electric car batteries simulation and economical approach

    OpenAIRE

    Canals Casals, Lluc; Amante García, Beatriz

    2013-01-01

    The industrial car manufacturers see in the high battery price an im-portant obstacle for an electric vehicle mass selling, thus mass production. There-fore, in order to find some cost relieves and better selling opportunities, they look and push forward to find profitable second battery uses. This study presents a sim-ulation and an economical approach for an electric taxi fleet charging system, us-ing these “old” electric car batteries, implemented in the city of Barcelona. The simulation w...

  7. High frequency of porcine norovirus infection in finisher units of Brazilian pig-production systems.

    Science.gov (United States)

    Silva, Patrícia F N; Alfieri, Alice F; Barry, Aline F; de Arruda Leme, Raquel; Gardinali, Noemi R; van der Poel, Wim H M; Alfieri, Amauri Alcindo

    2015-01-01

    Norovirus (NoV) is a member of the Caliciviridae family and is considered an emerging human enteric pathogen. NoVs are detected in farm animals such as cattle, sheep and pigs. Porcine NoV (PoNoV) is widespread worldwide, but frequency of infection is often low. This study aimed to investigate the natural PoNoV infection from adult animals of an important Brazilian pig-production region. Faecal samples (n = 112) of asymptomatic pigs aged 9 to 24 weeks old were collected from 16 grower-to-finish herds located in Paraná state, Brazilian Southern region, and evaluated for PoNoV presence. A reverse transcription-polymerase chain reaction (RT-PCR) assay was performed using specific primers that target a conserved region of the virus capsid gene (VP1). PoNoV was detected in 58 (51.8%) of the 112 faecal samples and in 14 (87.5%) of the 16 herds evaluated. Six of the obtained amplicons were submitted to phylogenetic genotyping analysis. The higher nucleotide (86.5-97.4%) and amino acid (100%) similarities of the sequences in this study were with the representative strains of the porcine NoV genogroup II genotype 11 (PoNoV GII-11). These results reveal that PoNoV infection is endemic in one of the most important pork production areas of Brazil and that the PoNoV GII-11 is prevalent in this region.

  8. Simulating Brazil’s tax-benefit system using Brahms, the Brazilian household microsimulation model

    Directory of Open Access Journals (Sweden)

    Herwig Immervoll

    2006-06-01

    Full Text Available Despite raising an amount of taxes that represents nearly 37% of the country’s GDP and spending over half of this revenue on social programmes, the Brazilian government has not been able to significantly alleviate inequality and poverty. A number of studies have shown evidence that, to a great extent, this situation is due to the inadequate targeting of public expenditures. The distributive impact of the financing of these expenditures, however, has received less attention. This paper investigates the combined impact of taxes and government cash transfers on the distribution of income among Brazilian households and compares Brazil’s redistributive performance with that of some countries with a similar tax burden.Apesar de arrecadar um montante de tributos equivalente a cerca de 37% do PIB e gastar mais da metade desta receita em programas sociais, o governo brasileiro não tem sido capaz de aliviar significativamente o problema da desigualdade e da pobreza. Alguns estudos têm mostrado evidência de que esta situação é, em grande parte, devida à inadequada focalização dos gastos públicos. Entretanto, o impacto distributivo do financiamento desses gastos tem recebido menos atenção. O presente trabalho investiga o impacto conjunto dos tributos e transferências monetárias governamentais sobre a distribuição de renda entre os domicílios brasileiros e compara o Brasil com alguns outros países com carga tributária semelhante.

  9. Magnesium Diboride Superconducting Stator Coils for Electric Propulsion Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Many are pursuing the development of electric propulsion systems for large aircraft due to the potential of being cleaner, quieter, lighter, and more versatile than...

  10. HIGH VOLTAGE SAFETY MANAGEMENT SYSTEM OF ELECTRIC VEHICLE

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In order to improve the drivability and energy efficiency of electric vehicle (EV), more and more batteries are connected in series with high voltage which makes it necessary to monitor the electric parameters of high voltage system (HVS) to ensure the high voltage safety. A high voltage safety management system is developed to solve this critical issue. Several key electric parameters including pre-charge, contact resistance, insulation resistance and remaining capacity are monitored and analyzed based on the presented equivalent models. An electronic unit called high voltage safety controller is developed. By the help of hardware-in-loop system, the equivalent models integrated in the high voltage safety controller are validated and the on-line electric parameters monitor strategy is discussed. The real vehicle experiment results indicate that the high voltage safety management system designed is suitable for EV application.

  11. Reactor/Brayton power systems for nuclear electric spacecraft

    International Nuclear Information System (INIS)

    Studies are currently underway to assess the technological feasibility of a nuclear-reactor-powered spacecraft propelled by electric thrusters. The purpose of this study was to provide comparative information on a closed cycle gas turbine power conversion system

  12. Precise time and time interval applications to electric power systems

    Science.gov (United States)

    Wilson, Robert E.

    1992-01-01

    There are many applications of precise time and time interval (frequency) in operating modern electric power systems. Many generators and customer loads are operated in parallel. The reliable transfer of electrical power to the consumer partly depends on measuring power system frequency consistently in many locations. The internal oscillators in the widely dispersed frequency measuring units must be syntonized. Elaborate protection and control systems guard the high voltage equipment from short and open circuits. For the highest reliability of electric service, engineers need to study all control system operations. Precise timekeeping networks aid in the analysis of power system operations by synchronizing the clocks on recording instruments. Utility engineers want to reproduce events that caused loss of service to customers. Precise timekeeping networks can synchronize protective relay test-sets. For dependable electrical service, all generators and large motors must remain close to speed synchronism. The stable response of a power system to perturbations is critical to continuity of electrical service. Research shows that measurement of the power system state vector can aid in the monitoring and control of system stability. If power system operators know that a lightning storm is approaching a critical transmission line or transformer, they can modify operating strategies. Knowledge of the location of a short circuit fault can speed the re-energizing of a transmission line. One fault location technique requires clocks synchronized to one microsecond. Current research seeks to find out if one microsecond timekeeping can aid and improve power system control and operation.

  13. The Brazilian equipment for photovoltaic systems industry: current concepts; A industria brasileira de equipamentos para sistemas fotovoltaicos: panorama atual

    Energy Technology Data Exchange (ETDEWEB)

    Varella, Fabiana Karla de Oliveira Martins; Cavaliero, Carla Kazue Nakao [Universidade Estadual de Campinas (DE/FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia], e-mail: fkv@fem.unicamp.br, e-mail: cavaliero@fem.unicamp.br; Silva, Ennio Peres da [Universidade Estadual de Campinas (DFA/IFGW/UNICAMP), SP (Brazil). Inst. de Fisica Gleb Wataghin. Dept. de Fisica Aplicada], e-mail: lh2ennio@ifi.unicamp.br

    2008-07-01

    The use of renewable alternative sources of energy in the world has been growing in the last few decades due to concerns about dependence on fossil sources and to environmental reasons, related to climatic change and its effects on mankind. Tax and/or financial incentives have been instituted for the population, to have access to renewable source technologies, and for the local equipment industry, to develop more quickly. In Brazil, the PV (photovoltaic) equipment to convert solar into electricity is more often used in low income rural communities, located distant from the grid network. However, since there is no currently specific regulatory incentive mechanism for this source in the country, the Brazilian PV equipment industry has not made great advances and the market is largely dominated by multinationals. Against this background, this work has as objective to analyze the current PV equipment industry in Brazil, in such way that the obtained information can aid in a future elaboration of a national program development to promote the use of this technology, stimulating the domestic industry and reducing the dependence on imported equipment. (author)

  14. Design requirement for electrical system of an advanced research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hoan Sung; Kim, H. K.; Kim, Y. K.; Wu, J. S.; Ryu, J. S

    2004-12-01

    An advanced research reactor is being designed since 2002 and the conceptual design has been completed this year for the several types of core. Also the fuel was designed for the potential cores. But the process system, the I and C system, and the electrical system design are under pre-conceptual stage. The conceptual design for those systems will be developed in the next year. Design requirements for the electrical system set up to develop conceptual design. The same goals as reactor design - enhance safety, reliability, economy, were applied for the development of the requirements. Also the experience of HANARO design and operation was based on. The design requirements for the power distribution, standby power supply, and raceway system will be used for the conceptual design of electrical system.

  15. SI-Hydro: an information system for the Brazilian hydrothermal system; SI-Hidro: um sistema de informacao para o sistema hidrotermico brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Fontanini, Walcir

    1995-03-01

    An information system for the Brazilian hydrothermal system denominated SI-Hydro is presented. This information system supplies data on the hydroelectric and thermoelectric park and can be used in the main elements recognition and in the planning and management of the whole system. The information system uses the product INGRES in the platform UNIX/X-Windows, which supplies resources so much for access to the database as for the interface man machine through the fourth generation language denominated Windows4GL. The next main topics are presented: information systems concepts and its relation with the direction levels to an organization and implications for the hydrothermal system operation planning in the scenarios of short, medium and long terms; thermal and hydroelectric plants operation routine details; the most used technical terms definition; and mathematical physical typical plants processes modeling presentation.

  16. An Electric Bus with a Battery Exchange System

    OpenAIRE

    Jeongyong Kim; Inho Song; Woongchul Choi

    2015-01-01

    As part of the ongoing effort to be independent of petroleum resources and to be free from pollutant emission issues, various electric vehicles have been developed and tested through their integration with real world systems. In the current paper, yet another application specific EV for public transportation, an electric bus, is introduced and explained with results from the pilot test program which was carried out under real traffic conditions. The main feature of the current system is a bat...

  17. Nuclear power plants. Electrical equipment of the safety system. Qualification

    International Nuclear Information System (INIS)

    This International Standard applies to electrical parts of safety systems employed at nuclear power plants, including components and equipment of any interface whose failure could affect unfavourably properties of the safety system. The standard also applies to non-electrical safety-related interfaces. Furthermore, the standard describes the generic process of qualification certification procedures and methods of qualification testing and related documentation. (P.A.)

  18. Pharmacogenetics in the Brazilian population

    Directory of Open Access Journals (Sweden)

    Guilherme eSuarez-Kurtz

    2010-10-01

    Full Text Available Brazil is the 5th largest country in the world and its present population, in excess of 190 million, is highly heterogeneous, as a result of centuries of admixture between Amerindians, Europeans and Sub-Saharan Africans. The estimated individual proportions of biogeographical ancestry vary widely and continuously among Brazilians, most individuals - irrespective of self-identification as White, Brown or Black, the major categories of the Brazilian Census race/color system - having significant degrees of European and African ancestry, while a sizeable number display also Amerindian ancestry. These features have important pharmacogenetic (PGx implications: first, extrapolation of PGx data from relatively well-defined ethnic groups is clearly not applicable to the majority of Brazilians; second, the frequency distribution of polymorphisms in pharmacogenes (e.g. CYP3A5, CYP2C9, GSTM1, ABCB1, GSTM3, VKORC, etc varies continuously among Brazilians and is not captured by race/color self-identification; third, the intrinsic heterogeneity of the Brazilian population must be acknowledged in the design and interpretation of PGx studies in order to avoid spurious conclusions based on improper matching of study cohorts. The peculiarities of PGx in Brazilians are illustrated with data for different therapeutic groups, such as anticoagulants, HIV-protease inhibitors and nonsteroidal antinflammatory drugs, and the challenges and advantages created by population admixture for the study and implementation of PGx are discussed. PGx data for Amerindian groups and Brazilian-born, first generation Japanese are presented to illustrate the rich diversity of the Brazilian population. Finally, I introduce the reader to the Brazilian Pharmacogenetic Network or Refargen (www.refargen.org.br, a nationwide consortium of research groups, with the mission to provide leadership in PGx research and education in Brazil, with a population health impact.

  19. Pharmacogenetics in the brazilian population.

    Science.gov (United States)

    Suarez-Kurtz, Guilherme

    2010-01-01

    Brazil is the fifth largest country in the world and its present population, in excess of 190;million, is highly heterogeneous, as a result of centuries of admixture between Amerindians, Europeans, and Sub-Saharan Africans. The estimated individual proportions of biogeographical ancestry vary widely and continuously among Brazilians: most individuals, irrespective of self-identification as White, Brown or Black - the major categories of the Brazilian Census "race/color" system - have significant degrees of European and African ancestry, while a sizeable number display also Amerindian ancestry. These features have important pharmacogenetic (PGx) implications: first, extrapolation of PGx data from relatively well-defined ethnic groups is clearly not applicable to the majority of Brazilians; second, the frequency distribution of polymorphisms in pharmacogenes (e.g., CYP3A5, CYP2C9, GSTM1, ABCB1, GSTM3, VKORC, etc) varies continuously among Brazilians and is not captured by race/color self-identification; third, the intrinsic heterogeneity of the Brazilian population must be acknowledged in the design and interpretation of PGx studies in order to avoid spurious conclusions based on improper matching of study cohorts. The peculiarities of PGx in Brazilians are illustrated with data for different therapeutic groups, such as anticoagulants, HIV protease inhibitors and non-steroidal antinflammatory drugs, and the challenges and advantages created by population admixture for the study and implementation of PGx are discussed. PGx data for Amerindian groups and Brazilian-born, first-generation Japanese are presented to illustrate the rich diversity of the Brazilian population. Finally, I introduce the reader to the Brazilian Pharmacogenetic Network or Refargen, a nation-wide consortium of research groups, with the mission to provide leadership in PGx research and education in Brazil, with a population health impact. PMID:21833165

  20. Fault-tolerant Actuator System for Electrical Steering of Vehicles

    DEFF Research Database (Denmark)

    Sørensen, Jesper Sandberg; Blanke, Mogens

    2006-01-01

    Being critical to the safety of vehicles, the steering system is required to maintain the vehicles ability to steer until it is brought to halt, should a fault occur. With electrical steering becoming a cost-effective candidate for electrical powered vehicles, a fault-tolerant architecture...... is needed that meets this requirement. This paper studies the fault-tolerance properties of an electrical steering system. It presents a fault-tolerant architecture where a dedicated AC motor design used in conjunction with cheap voltage measurements can ensure detection of all relevant faults...

  1. XMT interface to Electrical Submersible Pump System

    OpenAIRE

    Haldorsen, Henrik Dishington

    2010-01-01

    Oil is a non renewable source of energy, and with fewer discoveries of new oil fields it is in the interest to the society to utilize the existing fields to the maximum. There are many techniques to improve the recovery factor, and artificial lift is one of them. Electrical submersible pumps (ESP) which is a form for artificial lift has been common onshore for decades, but not in subsea wells. During the last decade ESP reliability has improved considerably and they are now much more interest...

  2. Wind power electric systems modeling, simulation and control

    CERN Document Server

    Rekioua, Djamila

    2014-01-01

    The book helps readers understand key concepts in standalone and grid connected wind energy systems and features analysis into the modeling and optimization of commonly used configurations through the implementation of different control strategies.Utilizing several electrical machinery control approaches, such as vector control and direct torque control 'Wind Power Electric Systems' equips readers with the means to understand, assess and develop their own wind energy systems and to evaluate the performance of such systems.Mathematical models are provided for each system and a corresponding MAT

  3. Study on improving measures of electricity tariff system

    Energy Technology Data Exchange (ETDEWEB)

    Song, Kwang Eui [Korea Energy Economics Institute, Euiwang (Korea)

    1999-12-01

    The studies related to electricity price so far has been focused on appropriateness of existing price system in the frame of price decision structure based on its cost. However, in the restructuring period trying to change a vertically integrated power industry, which is based on cost, it requires a study on problems of total price structure itself and its improvement. This study analyzes main idea of market price system as a ultimate alternative of present price system and its case study, and examines a actual effect of improving problems of existing electricity price system and its significance of changing price policy to a market price system. (author). 33 refs., 9 figs., 15 tabs.

  4. Electric fish as natural models for technical sensor systems

    Science.gov (United States)

    von der Emde, Gerhard; Bousack, Herbert; Huck, Christina; Mayekar, Kavita; Pabst, Michael; Zhang, Yi

    2009-05-01

    Instead of vision, many animals use alternative senses for object detection. Weakly electric fish employ "active electrolocation", during which they discharge an electric organ emitting electrical current pulses (electric organ discharges, EOD). Local EODs are sensed by electroreceptors in the fish's skin, which respond to changes of the signal caused by nearby objects. Fish can gain information about attributes of an object, such as size, shape, distance, and complex impedance. When close to the fish, each object projects an 'electric image' onto the fish's skin. In order to get information about an object, the fish has to analyze the object's electric image by sampling its voltage distribution with the electroreceptors. We now know a great deal about the mechanisms the fish use to gain information about objects in their environment. Inspired by the remarkable capabilities of weakly electric fish in detecting and recognizing objects with their electric sense, we are designing technical sensor systems that can solve similar sensing problems. We applied the principles of active electrolocation to devices that produce electrical current pulses in water and simultaneously sense local current densities. Depending on the specific task, sensors can be designed which detect an object, localize it in space, determine its distance, and measure certain object properties such as material properties, thickness, or material faults. We present first experiments and FEM simulations on the optimal sensor arrangement regarding the sensor requirements e. g. localization of objects or distance measurements. Different methods of the sensor read-out and signal processing are compared.

  5. Electric systems failures produced by CG lightning in Eastern Amazonia

    Directory of Open Access Journals (Sweden)

    Ana Paula Paes dos Santos

    2014-12-01

    Full Text Available Operational records of power outages of the electric energy distribution systems in eastern Amazonia presented a large number of events attributed to lightning strikes, during the 2006 to 2009 period. The regional electricity concessionary data were compared to actual lightning observations made by SIPAM's LDN system, over two areas where operational sub systems of transmission lines are installed. Statistical relations were drawn between the monthly lightning occurrence density and the number of power outages of the electric systems for both areas studied. The results showed that, although with some delays between these variables peaks, the number of power disruptions has a tendency to follow the behavior of the lightning occurrence densities variations. The numerical correlations were positive and may be useful to the transmission lines maintenance crews at least for the Belém-Castanhal electricity distribution sub system. Evidence was found, that the SST's over certain areas of the Pacific and Atlantic Oceans, influence convection over the area of interest, and may help to prognosticate the periods of intense electric storms, requiring repair readiness for the regional electric systems.

  6. Electrical power systems for distributed generation

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, T.A.; Huval, S.J. [Stewart & Stevenson Services, Inc., Houston, TX (United States)

    1996-12-31

    {open_quotes}Distributed Generation{close_quotes} has become the {open_quotes}buzz{close_quotes} word of an electric utility industry facing deregulation. Many industrial facilities utilize equipment in distributed installations to serve the needs of a thermal host through the capture of exhaust energy in a heat recovery steam generator. The electrical power generated is then sold as a {open_quotes}side benefit{close_quotes} to the cost-effective supply of high quality thermal energy. Distributed generation is desirable for many different reasons, each with unique characteristics of the product. Many years of experience in the distributed generation market has helped Stewart & Stevenson to define a range of product features that are crucial to most any application. The following paper will highlight a few of these applications. The paper will also examine the range of products currently available and in development. Finally, we will survey the additional services offered by Stewart & Stevenson to meet the needs of a rapidly changing power generation industry.

  7. Examination of small wind electric systems in Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Haack, B.N.

    1977-01-01

    This study examines the use of small wind powered generators for supplying electricity to individual households in Michigan. The primary interests in this study were to (1) gain a better understanding of the performance of a small wind system under typical conditions, (2) determine how that performance is influenced by component variations in the technological, consumptive, and meteorological subsystems, and (3) explore several methods for evaluating these systems including an economic evaluation, an energy analysis, and an assessment of relative environmental impacts. A computer operated simulation model of a small wind electric system was constructed for use as the basic methodological tool in this study. Components included in this model were wind speed observations collected at Michigan first order meteorological stations, residential electrical consumption data from sampled Michigan households, and characteristics of commercially available and developmental equipment including aerogenerators, storage devices, and electrical inverters.

  8. Electric energy storage systems for future hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Kemper, Hans; Huelshorst, Thomas [FEV Motorentechnik GmbH, Aachen (Germany); Sauer, Dirk Uwe [Elektrochemische Energiewandlung und Speichersystemtechnik, ISEA, RWTH Aachen Univ. (Germany)

    2008-07-01

    Electric energy storage systems play a key role in today's and even more in future hybrid and electric vehicles. They enable new additional functionalities like Start/Stop, regenerative braking or electric boost and pure electric drive. This article discusses properties and requirements of battery systems like power provision, energy capacity, life time as a function of the hybrid concepts and the real operating conditions of the today's and future hybrid drivetrains. Battery cell technology, component sizing, system design, operating strategy safety measures and diagnosis, modularity and vehicle integration are important battery development topics. A final assessment will draw the conclusion that future drivetrain concepts with higher degree of electrician will be significantly dependent on the progress of battery technology. (orig.)

  9. 77 FR 70484 - Preoperational Testing of Onsite Electric Power Systems To Verify Proper Load Group Assignments...

    Science.gov (United States)

    2012-11-26

    ... COMMISSION Preoperational Testing of Onsite Electric Power Systems To Verify Proper Load Group Assignments... Power Systems to Verify Proper Load Group Assignments, Electrical Separation, and Redundancy.'' DG-1294... encompass preoperational testing of electrical power systems used to meet current Station...

  10. System for detecting and limiting electrical ground faults within electrical devices

    International Nuclear Information System (INIS)

    This paper discusses, in a nuclear power plant of a variety wherein a reactor is provided including a reactor vessel retaining a liquid metal coolant, a reactor core and an electromagnetic pump having inductive windings insulatively retained within the electrically conductive wall of an enclosure, the method for controlling electrical ground fault current between a the inductive winding and the walls. It comprises providing an electrically isolated power source by inductive coupling with the plant power supply; rectifying the power source to provide an isolated d.c. power source; providing an inverter powered from the isolated d.c. power source under the control of the plant control system for selectively energizing the inductive windings; providing a fault control conductor electrically connected with the pump enclosure wall and extending as an electrical return for ground fault current to the inverter; and providing an electrical resistance between the conductor and the isolated inverter having an impedance selected to limit the fault current below a predetermined value limiting arc damage at any the electrical ground fault location

  11. Wind Power in Electrical Distribution Systems

    DEFF Research Database (Denmark)

    Chen, Zhe

    2013-01-01

    Recent years, wind power is experiencing a rapid growth, large number of wind turbines/wind farms have been installed and connected to power systems. In addition to the large centralised wind farms connected to transmission grids, many distributed wind turbines and wind farms are operated...... as distributed generators in distribution systems. This paper discusses the issues of wind turbines in distribution systems. Wind power conversion systems briefly introduced, the basic features and technical characteristics of distributed wind power system are described, and the main technical demands...

  12. The System of Fast Charging Station for Electric Vehicles with Minimal Impact on the Electrical Grid

    Directory of Open Access Journals (Sweden)

    Petr Chlebis

    2016-01-01

    Full Text Available The searching and utilization of new energy sources and technologies is a current trend. The effort to increase the share of electricity production from renewable energy sources is characteristic for economically developed countries. The use of accumulation of electrical energy with a large number of decentralized storage units is most preferred, as well as the focus on the production of energy at the point of its consumption. Modern cogeneration units are a good example. This paper describes the accumulation of electrical energy for equalizing the power balance of electric charging stations with high instantaneous power. The possibility of re-utilization of electrical energy from the charged vehicle in the case of lack of electricity in the power grid is solved at the same time. This paper also deals with the selection of appropriate concept of accumulation system and its cooperation with both renewable and distribution networks. Details of the main power components including the results obtained from the system implementation are also described in this paper.

  13. Shock to the system: Restructuring America's electricity industry

    International Nuclear Information System (INIS)

    Recent decades have seen revolutions in communications, finance, and transportation. In a similar way, technological, economic, and political developments are reshaping the US electricity industry. This concise, balanced, and readable primer, produced by a team of economic analysts at Resources for the Future, introduces the concepts, crucial elements, and terminology used in discussions about electricity restructuring. A Shock to the System provides the background necessary to understand the increasing role of competition in electricity markets. The authors present the history of public policy regarding electricity, identify the significant proposals for implementing competition, and examine their potential consequences for utility regulation, industry structure, cost recovery, and the environment. This volume is an instructive guide to the decisions that electricity providers, customers, and policy makers will face, what forms the decisions are likely to take, and what the long-term ramifications may be

  14. Selection and Simulation of Electric Steering Gear Control System

    Directory of Open Access Journals (Sweden)

    Xin Wang

    2013-06-01

    Full Text Available For the electric steering gear control systems, the principle of the system is introduced. Specific model and parameters are selected to deduce the optimal combination of control system and choices method of the steering system model is determined. The transfer function of motor according to the parameters is achieved and simulation results are gained based on MATLAB. Simulation results show that this method can meet the performance requirements of electric steering gear, the control method is simple and easy to work to achieve.

  15. Handbook of electrical power system dynamics modeling, stability, and control

    CERN Document Server

    Eremia, Mircea

    2013-01-01

    Complete guidance for understanding electrical power system dynamics and blackouts This handbook offers a comprehensive and up-to-date treatment of power system dynamics. Addressing the full range of topics, from the fundamentals to the latest technologies in modeling, stability, and control, Handbook of Electrical Power System Dynamics provides engineers with hands-on guidance for understanding the phenomena leading to blackouts so they can design the most appropriate solutions for a cost-effective and reliable operation. Focusing on system dynamics, the book details

  16. [Health on the borders: access to and demands on the Brazilian National Health System by foreigners and non-resident Brazilians in cities along the border with MERCOSUR countries from the perspective of municipal health secretaries].

    Science.gov (United States)

    Giovanella, Ligia; Guimarães, Luisa; Nogueira, Vera Maria Ribeiro; Lobato, Lenaura de Vasconcelos Costa; Damacena, Giseli Nogueira

    2007-01-01

    In the context of forming common markets, border areas require special attention, since they anticipate the effects of integration processes. Along borders, different political, monetary, security, and social systems coexist; the intensification of flows resulting from integration raises challenges for the health systems, requiring specific policies focused on guaranteeing the right to health. This article presents the results of a study on the conditions for access to (and demands for) health services in the MERCOSUR border cities. A survey was performed with municipal health secretaries in the 69 Brazilian cities in the States of Rio Grande do Sul, Santa Catarina, Paraná, and Mato Grosso do Sul that border on the other MERCOSUR countries. The study attempted to identify the services demanded by the border population, mechanisms used for access, flows between services and systems, response strategies, and local agreements. Initiatives for cooperation between Brazilian and foreign local administrators were identified in nearly half of the municipalities and can orient the formulation of guidelines for border situations, allowing improvement in comprehensive access to health care.

  17. Dynamic Scenario Modelling in Electricity Distribution System Asset Management

    OpenAIRE

    Palola, Jussi

    2014-01-01

    The life of individuals, societal welfare and global economics are deeply interconnected with power systems in a multidimensional manner. A change in one entity affects the whole system. This thesis is a research journey from electrical distribution systems to global economics, and finally to power transformer unit asset management. The objective is to investigate dynamic scenario modelling in power system asset management and apply it to a distribution system operator’s power transformer fle...

  18. Local CHP Plants between the Natural Gas and Electricity Systems

    DEFF Research Database (Denmark)

    Bregnbæk, Lars; Schaumburg-Müller, Camilla

    2005-01-01

    , and they contribute significantly to the electricity production. CHP is, together with the wind power, the almost exclusive distributed generation in Denmark. This paper deals with the CHP as intermediary between the natural gas system and the electricity system. In particular, the relationship between the peak hour......Local combined heat and power (CHP) plants in Denmark constitute an important part of the national energy conversion capacity. In particular they supply a large share of the district heating networks with heat. At the same time they are important consumers as seen from the gas network system...... characteristics of the electricity and gas systems will be investigated. The point is here that the two systems will tend to have peak demand during the same hours. This is the typical situation, since load is high during the same hours of the day and of the year. Moreover, the random variations in the load...

  19. Binary breeder reactor: an option for Brazilian energy future

    International Nuclear Information System (INIS)

    To assure a continued supply of electric energy beyond a few decades from now, developmemnt of fast breeder reactors is a necessity. Binary fueled LMFBRs combine an improvement in the inherent safety of fast reactors and an efficient use of the abundant thorium. A nuclear system that starts with PWRs and gradually shifts to a FBR system or to a FBR-PWR symbiotic system appears to be the most reasonable one for Brazil. Natural uranium requirements and possible sequences of reactor introductions are discussed for some postulated Brazilian situations. A permanent system of approx. 100 GWe capacity can be established based on the estimated resource of natural uranium. (Author)

  20. Binary breeder reactor an option for Brazilian energy future

    International Nuclear Information System (INIS)

    To assure a continued supply of electric energy beyond a few decades from now, development of fast breeder reactors is a necessity. Binary fueled LMFBRs combine an improvement in the inherent safety of fast reactors and an efficient use of the abundant thorium. A nuclear system that starts with PWRs and gradually shifts to a FBR system or to a FBR-PWR symbiotic system appears to be the most resonable one for Brazil. Natural uranium requirements and possible sequences of reactor introductions are discussed for some postulated Brazilian situations. A permanent system of approximatelly 100 GWe capacity can be established based on the estimated resource of natural uranium. (Author)

  1. Authentication System for Electrical Charging of Electrical Vehicles in the Housing Development

    Science.gov (United States)

    Song, Wang-Cheol

    Recently the smart grid has been a hot issue in the research area. The Electric Vehicle (EV) is the most important component in the Smart Grid, having a role of the battery component with high capacity. We have thought how to introduce the EV in the housing development, and for proper operation of the smart grid systems in the housing area the authentication system is essential for the individual houses. We propose an authentication system to discriminate an individual houses, so that the account management component can appropriately operate the electrical charging and billing in the housing estate. The proposed system has an architecture to integrate the charging system outside a house and the monitoring system inside a house.

  2. Integration between electric vehicle charging and micro-cogeneration system

    International Nuclear Information System (INIS)

    Highlights: • The interaction between an MCHP system and EV charging is investigated. • A parametric analysis with respect to daily driving distance of the EV is performed. • Dynamic simulations are carried out considering two different climates. • Two EV charging strategies are analyzed to maximize the self-consumed electricity. • The impact of EVs on electric grid and economic feasibility of MCHP can be improved. - Abstract: In the near future the diffusion of plug-in electric vehicles (EVs) could play an important role in the reduction of emissions and oil dependency associated with the transport sector. However this technology could have a big impact on the electric network because EVs require a considerable amount of electricity. In order to meet the growing load due to the diffusion of EVs, the construction of new infrastructures will be required. The introduction of micro-cogeneration systems could represent a key factor in the reduction of the negative effects on the electric network related to EVs charging. The EVs are often driven during the day and recharged during the night; so the overnight charge of the EVs allows to reduce the amount of electricity exported to the grid. In this way the economic benefits associated with the introduction of micro-cogenerator system (Micro Combined Heat and Power, MCHP), that depend on the economic value of the “produced” electricity, can be improved. At the same time the impact of EVs charge on the electric network can be reduced when electricity is provided by MCHP. In this paper the interaction between an MCHP system, the EV charging and a typical semidetached house is investigated by means of dynamic simulations. The analysis is carried out in two different locations (Torino and Napoli) in order to evaluate the effects of climatic conditions on the system performance. A parametric analysis with respect to the daily driving distance of the EV is carried out in order to highlight the effect of this

  3. Constitutional issues of Brazilian tax system in the biodiesel industry; Aspectos constitucionais do regime tributario aplicado a industria brasileira do biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Ana Monica Medeiros; Xavier, Yanko Marcius de Alencar [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    The recent insertion of biodiesel derived from oily vegetables in the Brazilian genetic matrix calls for the analysis of some aspects that belong to it. This study begins with an introduction to 'sustainable development' definition, it goes through the concept of biodiesel and a brief historical, the paper analyzes it's advantages - social, economic and environmental - related to the fossil fuels predominantly used. With the purpose to look into the 'Programa Nacional de Producao e Uso de Biodiesel - PNPB' created by the Federal Government in 2004, this study searches about the Brazilian regulating legislation on this subject, fundamental for the comprehension of the plans and objectives sought by the Brazilian Government with the encouragement to the production of the biodiesel. This study also investigates the role of the 'Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis - ANP' in the regulation of the activities involving this biofuel. In this manner, from the analysis of the related legislation of this new energy source, the present article aims to delineate a view of the the tax system for this new market according to Constitution and pointing out the economic impacts of the biodiesel insertion in the Brazilian national energetic matrix. (author)

  4. Alternatives for hydrogen production in Brazilian regions aiming the generation of distributed electric energy; Alternativas para a producao de hidrogenio nas regioes brasileiras visando a geracao de energia eletrica distribuida

    Energy Technology Data Exchange (ETDEWEB)

    Bernardi Junior, Paulo

    2009-07-01

    In this work possible sources of hydrogen production for the generation of electric energy in a distributed way, with the fuel cell use, had been selected and studied. Three renewable sources (biomass, photovoltaic and wind) have been studied for energy generation in Brazil. For the establishment of numerical values, the main regional agricultural cultures and the amount of biomass in various brazilian states had been evaluated, in the form of waste, capable to be used for future hydrogen production. It was also investigated and evaluated the numerical capacity of hydrogen production from wind and photovoltaic resources for each region in Brazil, considering the electrolytic process. Based on the results, it is possible to demonstrate the potentialities of Brazil for electric energy generation in a planned distributed way, with fossil fuel substitution, and consequently, decreasing the environmental impacts. (author)

  5. Information and management system for the secondary electricity distribution network

    Energy Technology Data Exchange (ETDEWEB)

    Knezevic, M. (Rudnik i Termoelectrana Gacko u Osnivanju (Yugoslavia))

    1988-07-01

    Emphasizes the importance of a reliable and continuous secondary electrical distribution network for surface coal mine productivity. Interruptions in equipment operation caused by mechanical and electrical failures should be eliminated without delay. Effective communication systems should lead to reliable management and high productivity in mines. It is suggested that mines be divided into four groups according to their sensitivity to supply interruptions, and provided with remotely controlled signalling devices linked to main and auxiliary dispatching stations equipped with micro-computers. Productivity may be increased by some 50-70% and supply costs decreased by some 35% if appropriate electrical distribution systems are used. A sketch of a secondary electrical supply network is attached. 11 refs.

  6. Electrical network reliability and system blackout development simulations

    Science.gov (United States)

    Nepomnyashchiy, V. A.

    2015-12-01

    The main regulations of the author's model of electrical network reliability and system blackout development are stated. The model allows one to analytically determine the main technical and economic parameters indicators of reliability of electrical network operation, taking into account the generating power dislocations and electric loads, operation conditions, and dynamic and static stability of operation, while simultaneously calculating short circuit currents. The model also considers open-phase modes at singlephase short circuits and allows one to choose the most efficient operation conditions. The calculations are finished with an estimate of the annual averages of undersupply of energy and economic losses of customers due to their power supply interruptions.

  7. Diversity modelling for electrical power system simulation

    Science.gov (United States)

    Sharip, R. M.; Abu Zarim, M. A. U. A.

    2013-12-01

    This paper considers diversity of generation and demand profiles against the different future energy scenarios and evaluates these on a technical basis. Compared to previous studies, this research applied a forecasting concept based on possible growth rates from publically electrical distribution scenarios concerning the UK. These scenarios were created by different bodies considering aspects such as environment, policy, regulation, economic and technical. In line with these scenarios, forecasting is on a long term timescale (up to every ten years from 2020 until 2050) in order to create a possible output of generation mix and demand profiles to be used as an appropriate boundary condition for the network simulation. The network considered is a segment of rural LV populated with a mixture of different housing types. The profiles for the 'future' energy and demand have been successfully modelled by applying a forecasting method. The network results under these profiles shows for the cases studied that even though the value of the power produced from each Micro-generation is often in line with the demand requirements of an individual dwelling there will be no problems arising from high penetration of Micro-generation and demand side management for each dwellings considered. The results obtained highlight the technical issues/changes for energy delivery and management to rural customers under the future energy scenarios.

  8. Modern Solutions for Automation of Electrical Traction Power Supply Systems

    Directory of Open Access Journals (Sweden)

    Ana Mihaela Andreica

    2011-09-01

    Full Text Available This paper presents modern solutions for the automation of the electrical traction power supply system used in urban public transport (trams, trolleybuses and subway trains. The monitoring and control of this process uses SCADA distributed architectures, grouped around a central point (dispatcher who controls all field sensors, transmitters and actuators using programmable logical controllers. The presented applications refer to the Bucharest electrical transport infrastructure.

  9. Computer simulation of an unmanned aerial vehicle electric propulsion system

    OpenAIRE

    Yourkowski, Joel.

    1996-01-01

    There has been a substantial increase in the use of electric propulsion systems in Unmannned Aerial Vehicles (UAVs). However, this area of engineering has lacked the benefits of a dynamic model that could be used to optimize the design. configurations and flight profiles. The Naval Research Laboratory (NRL) has accurate models for the aerodynamics associated with UAVs. Therefore the proposed electric propulsion model would use the torque and RPM requirements generated by the aerodynamic model...

  10. Electric Current Systems in Solar Active Regions

    Science.gov (United States)

    LaBonte, B. J.; Mickey, D. L.

    2000-05-01

    The first study to show the persistence of local field-aligned current systems in active regions was reported by Pevtsov, Canfield, and Metcalf (Astrophys. J., 425, L117, 1994). Their work was limited to a sample of complex, flare-productive regions because of the sensitivity limit of the data from the Haleakala Stokes Polarimeter. I report here on a new survey of active regions with the Imaging Vector Magnetograph (IVM) at Mees Solar Observatory. The IVM data permit a look at current systems in simpler, more typical active regions, because of better sensitivity, temporal sampling, spatial resolution and field-of-view. Small scale current systems are commonly seen. Transport of current systems by advective processes is commonly seen over times of hours. This work was supported by NASA grant NAG5-4941 and by a subcontract with LMSAL in support of NASA contract NAS8-40801 for YOHKOH SXT.

  11. Electric Vehicles in Power Systems with 50% Wind Power Penetration

    DEFF Research Database (Denmark)

    Østergaard, Jacob; Foosnæs, Anders; Xu, Zhao;

    2009-01-01

    Electric vehicles (EVs) provide a unique opportunity to reduce the CO2-emissions from the transport sector. At the same time, EVs have the potential to play an important role in an economic and reliable operation of an electricity system with high penetration of renewable energy. EVs...... will be an important balancing measure to enable the Danish government’s energy strategy, which implies 50% wind power penetration in the electric power system. An EV will be a storage device for smoothing power fluctuations from renewable resources especially wind power and provide valuable system services...... of the recently establish EDISON program are described. EDISON is a research consortium which will design a new model for the Danish Energy system with high penetration of wind power and EVs with V2G-functionality. EDISON will have access to a real-life test bed on the Danish island of Bornholm (population 40,000)....

  12. Small Wind Electric Systems: A U.S. Consumer's Guide

    International Nuclear Information System (INIS)

    The U.S. Consumer's Guide for Small Wind Electric systems provides consumers with enough information to help them determine if a small wind electric system can provide all or a portion of the energy they need for their home or business based on their wind resource, energy needs, and their economics. Topics discussed in the guide include: how to make your home more energy efficient, how to choose the right size turbine, the parts of a wind electric system, determining if there is enough wind resource on your site, choosing the best site for your turbine, connecting your system to the utility grid, and if it's possible to become independent of the utility grid using wind energy

  13. Integrated exhaust and electrically heated particulate filter regeneration systems

    Science.gov (United States)

    Gonze, Eugene V.; Paratore, Jr., Michael J.

    2013-01-08

    A system includes a particulate matter (PM) filter that includes multiple zones. An electrical heater includes heater segments that are associated with respective ones of the zones. The electrical heater is arranged upstream from and proximate with the PM filter. A post-fuel injection system injects fuel into at least one of a cylinder of an engine and an exhaust system. A control module is configured to operate in a first mode that includes activating the electrical heater to heat exhaust of the engine. The control module is also configured to operate in a second mode that includes activating the post-injection system to heat the exhaust. The control module selectively operates in at least one of the first mode and the second mode.

  14. Study of thermoelectric systems applied to electric power generation

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, A.; Vian, J.G.; Astrain, D.; Martinez, A. [Dpto. Ingenieria Mecanica, Energetica y de Materiales, Universidad Publica de Navarra, Pamplona (Spain)

    2009-05-15

    A computational model has been developed in order to simulate the thermal and electric behavior of thermoelectric generators. This model solves the nonlinear system of equations of the thermoelectric and heat transfer equations. The inputs of the program are the thermoelectric parameters as a function of temperature and the boundary conditions, (room temperature and residual heat flux). The outputs are the temperature values of all the elements forming the thermoelectric generator, (performance, electric power, voltage and electric current generated). The model solves the equation system using the finite difference method and semi-empirical expressions for the convection coefficients. A thermoelectric electric power generation test bench has been built in order to validate and determine the accuracy of the computational model, which maximum error is lower than 5%. The objective of this study is to create a design tool that allows us to solve the system of equations involved in the electric generation process without needing to impose boundary conditions that are not known in the design phase, such as the temperature of the Peltier modules. With the computational model, we study the influence of the heat flux supplied as well as the room temperature on the electric power generated. (author)

  15. Sensitivity analysis in electric system expansion planning study using DECADES

    International Nuclear Information System (INIS)

    To cover the increasing electricity demand as a key economic and social factor of development, it is necessary to have adequate expansion police. The delay in installation of certain capabilities produces electricity deficit. In other hand, construction of oversized capacities generates excessive costs. Therefore it is important to acquire or develop adequate methodologies according to the country specific conditions to carry out electric expansion planning studies. The goal is to chose optimal solutions in order to reach sustainable development using owns energy resources and preserving the environment. In the paper the Decades methodology is used for electricity system expansion planning. Premises and main assumptions for the calculations are presented. Some electric system expansion cases are evaluated. We also present the results of a sensibility study varying the discount rate, loss of load probability energy not served cost, fuel availability and fuel and investment costs. The reliability criteria currently not used in Cuban electric system are evaluated. We discuss the results and display the conclusions and recommendations

  16. Photovoltaic power systems and the National Electrical Code: Suggested practices

    Energy Technology Data Exchange (ETDEWEB)

    Wiles, J. [New Mexico State Univ., Las Cruces, NM (United States). Southwest Technology Development Inst.

    1996-12-01

    This guide provides information on how the National Electrical Code (NEC) applies to photovoltaic systems. The guide is not intended to supplant or replace the NEC; it paraphrases the NEC where it pertains to photovoltaic systems and should be used with the full text of the NEC. Users of this guide should be thoroughly familiar with the NEC and know the engineering principles and hazards associated with electrical and photovoltaic power systems. The information in this guide is the best available at the time of publication and is believed to be technically accurate; it will be updated frequently. Application of this information and results obtained are the responsibility of the user.

  17. Application of Laser Ablation Processing in Electric Power System Industries

    Science.gov (United States)

    Konagai, Chikara; Sano, Yuji; Nittoh, Koichi; Kuwako, Akira

    The present status of laser ablation processing applied in electric power system industries is reviewed. High average power LD-pumped Nd:YAG lasers with Q-switch have been developed and currently introduced into various applications. Optical fiber based laser beam delivery systems for Q-switched pulse laser are also being developed these years. Based on such laser and beam delivery technology, laser ablation processes are gradually introduced in maintenance of nuclear power plant, thermal power plant and electrical power distribution system. Cost effectiveness, robustness and reliability of the process is highly required for wide utilization in these fields.

  18. Advanced Driving Assistance Systems for an Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Pau Muñoz-Benavent

    2012-12-01

    Full Text Available This paper describes the automation of a Neighborhood Electric Vehicle (NEV and the embedded distributed architecture for implementing an Advanced Driving Assistance System (ADAS with haptic, visual, and audio feedback in order to improve safety. For the automation, original electric signals were conditioned, and mechanisms for actuation and haptic feedback were installed. An embedded distributed architecture was chosen based on two low-cost boards and implemented under a Robotics Operating System (ROS framework. The system includes features such as collision avoidance and motion planning.

  19. Impact of the Code of Conduct on the Safety and Security of Radioactive Sources on the Brazilian control system for import and export of radioactive sources

    International Nuclear Information System (INIS)

    The paper presents an evaluation of the impact of the requirements of the Code of Conduct on the Safety and Security of Radioactive Sources and of its associated document, the Guidance on the Import and Export of Radioactive Sources, on the Brazilian control system for the import and export of radioactive sources. An overview of the current control procedures adopted in Brazil for the import and export of material or equipment capable of producing ionizing radiation is also presented. The compatibility of the Brazilian control system with the new requirements is discussed. New procedures are considered in order to implement an improved control system for the import and export of radioactive sources, which would be completely harmonized with the requirements of the Code of Conduct. (author)

  20. Modelling and simulation of vehicle electric power system

    Science.gov (United States)

    Lee, Wootaik; Choi, Daeho; Sunwoo, Myoungho

    In recent years, the demand for an increased number of vehicle functions by legislation and customer expectations has introduced many electronic control systems and electrical driven units in vehicles and has resulted in steadily increasing electrical loads. Moreover, due to heavy urban traffic conditions, the idling time fraction has increased and reduced the power generation of the alternator. In the vehicle design phase, in order to avoid an over- or under-design problem of the electric power system, it is necessary to understand both the characteristics of each component of the vehicle electric power system and the interactions between the components. For this purpose, model and simulation algorithms of the vehicle power system are required. In this study, the vehicle electric power system, which is mainly composed of a generator and battery, is modelled and evaluated. Among the various proposed battery models, two types are compared in terms of accuracy and ease-of-use. These two models are distinguished by the consideration of inrush current at the beginning of charging and discharging. In addition, a variable terminal voltage alternator model (VTVA model) is proposed, and is compared with a constant terminal voltage alternator model (CTVA model). Based on the major component model, a simulation algorithm is developed and used to perform a case study. Compared with real data from the vehicle, the simulation results of energy generation and consumption are comparable.

  1. Electric motor systems in developing countries: Opportunities for efficiency improvement

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, S.; Monahan, P.; Lewis, P.; Greenberg, S. [Lawrence Berkeley Lab., CA (United States); Nadel, S. [American Council for an Energy-Efficient Economy, Washington, DC (United States)

    1993-08-01

    This report presents an overview of the current status and efficiency improvement potential of industrial motor systems in developing countries. Better management of electric motor systems is of particular relevance in developing countries, where improved efficiency can lead to increased productivity and slower growth in electricity demand. Motor systems currently consume some 65--80% of the industrial electricity in developing countries. Drawing on studies from Thailand, India, Brazil, China, Pakistan, and Costa Rica, we describe potential efficiency gains in various parts of the motor system, from the electricity delivery system through the motor to the point where useful work is performed. We report evidence of a significant electricity conservation potential. Most of the efficiency improvement methods we examine are very cost-effective from a societal viewpoint, but are generally not implemented due to various barriers that deter their adoption. Drawing on experiences in North America, we discuss a range of policies to overcome these barriers, including education, training, minimum efficiency standards, motor efficiency testing protocols, technical assistance programs, and financial incentives.

  2. Automation in electrical systems of nuclear fuel recycle facilities

    International Nuclear Information System (INIS)

    This paper covers the automation aspects in substation as well as other plant areas of a typical Nuclear Fuel Recycle Facility. Automation done at equipment level viz. HV/LV switchgear, Transformer etc. as well as system level viz. UPS system, Ventilation system etc. have been described. Automation in electrical systems of nuclear fuel recycle facilities have resulted in remote operation, reduction in manpower, better process control and increased throughput of the plant. (author)

  3. Impacts of electric propulsion systems on submarine design.

    OpenAIRE

    Ballard, Michael A.

    1989-01-01

    A theoretical study was carried out on the effects of replacing submarine turbine-reduction gear propulsion drive systems with an equivalent electric drive system. Alternating current (A.C.) and direct current (D.C.) systems were designed using computer based machine synthesis programs. The systems considered included direct drive motors operating at the speed of the submarine drive shaft and motors operating at higher speeds in conjunction with integral single stage reduction gears. Methods ...

  4. Cold Vacuum Drying (CVD) Electrical System Design Description

    Energy Technology Data Exchange (ETDEWEB)

    BRISBIN, S.A.

    1999-06-17

    This document provides a technical explanation of the design and operation of the electrical system for the Cold Vacuum Drying Facility. This document identifies the requirements, and the basis for the requirements and details on how the requirements have been implemented in the design and construction of the facility. This document also provides general guidance for the surveillance, testing, and maintenance of this system.

  5. An Electric Bus with a Battery Exchange System

    Directory of Open Access Journals (Sweden)

    Jeongyong Kim

    2015-07-01

    Full Text Available As part of the ongoing effort to be independent of petroleum resources and to be free from pollutant emission issues, various electric vehicles have been developed and tested through their integration with real world systems. In the current paper, yet another application specific EV for public transportation, an electric bus, is introduced and explained with results from the pilot test program which was carried out under real traffic conditions. The main feature of the current system is a battery exchanging mechanism mounted on the roof of the bus. The current configuration certainly requires an externally fabricated battery exchanging robot system that would complement the electric bus for a fully automated battery exchanging process. The major advantage of the current system is the quick re-charging of the electric energy through the physical battery exchange and the possible utilization of the battery exchange station as a mini scale energy storage system for grid system peak power shaving. With the total system solution approach for the public transportation system, it is fully expected to create outstanding business opportunities in number of areas such as battery suppliers, battery exchanging station management, battery leasing and many more.

  6. Safety analyses of the electrical systems on VVER NPP

    International Nuclear Information System (INIS)

    Energoprojekt Praha has been the main entity responsible for the section on 'Electrical Systems' in the safety reports of the Temelin, Dukovany and Mochovce nuclear power plants. The section comprises 2 main chapters, viz. Offsite Power System (issues of electrical energy production in main generators and the link to the offsite transmission grid) and Onsite Power Systems (AC and DC auxiliary system, both normal and safety related). In the chapter on the off-site system, attention is paid to the analysis of transmission capacity of the 400 kV lines, analysis of transient stability, multiple fault analyses, and probabilistic analyses of the grid and NPP power system reliability. In the chapter on the on-site system, attention is paid to the power balances of the electrical sources and switchboards set for various operational and accident modes, checks of loading and function of service and backup sources, short circuit current calculations, analyses of electrical protections, and analyses of the function and sizing of emergency sources (DG sets and UPS systems). (P.A.)

  7. HEMP emergency planning and operating procedures for electric power systems. Power Systems Technology Program

    Energy Technology Data Exchange (ETDEWEB)

    Reddoch, T.W.; Markel, L.C. [Electrotek Concepts, Inc., Knoxville, TN (United States)

    1991-12-31

    Investigations of the impact of high-altitude electromagnetic pulse (HEMP) on electric power systems and electrical equipment have revealed that HEMP creates both misoperation and failures. These events result from both the early time E{sub 1} (steep-front pulse) component and the late time E{sub 3} (geomagnetic perturbations) component of HEMP. In this report a HEMP event is viewed in terms of its marginal impact over classical power system disturbances by considering the unique properties and consequences of HEMP. This report focuses on system-wide electrical component failures and their potential consequences from HEMP. In particular, the effectiveness of planning and operating procedures for electric systems is evaluated while under the influence of HEMP. This assessment relies on published data and characterizes utilities using the North American Electric Reliability Council`s regions and guidelines to model electric power system planning and operations. Key issues addressed by the report include how electric power systems are affected by HEMP and what actions electric utilities can initiate to reduce the consequences of HEMP. The report also reviews the salient features of earlier HEMP studies and projects, examines technology trends in the electric power industry which are affected by HEMP, characterizes the vulnerability of power systems to HEMP, and explores the capability of electric systems to recover from a HEMP event.

  8. Alternating Current All-electrical Gun Control System in Tanks

    Directory of Open Access Journals (Sweden)

    Zang Kemao

    2004-07-01

    Full Text Available The ac all-electrical gun control system is composed of permanent magnetic synchronous machine-drive control systems and the ball-screw by replacing the complicated electrohydraulic systems. At the same time, the variable-structure system with sliding modes makes the gun control systems to have higher performances using the only rate flexure gyroscope. Thereby, vehicle hull gyroscope and angular gyroscope are left out.The new ac all-electrical gun control systems developed are reduced by 40 per cent in weight, decreased by 30 per cent in volume, increased by 35 per cent in efficiency, and enhanced by three times in service life as compared to the current gun control systems.

  9. Electric energy supply systems: description of available technologies

    Energy Technology Data Exchange (ETDEWEB)

    Eisenhauer, J.L.; Rogers, E.A.; King, J.C.; Stegen, G.E.; Dowis, W.J.

    1985-02-01

    When comparing coal transportation with electric transmission as a means of delivering electric power, it is desirable to compare entire energy systems rather than just the transportation/transmission components because the requirements of each option may affect the requirements of other energy system components. PNL's assessment consists of two parts. The first part, which is the subject of this document, is a detailed description of the technical, cost, resource and environmental characteristics of each system component and technologies available for these components. The second part is a computer-based model that PNL has developed to simulate construction and operation of alternative system configurations and to compare the performance of these systems under a variety of economic and technical conditions. This document consists of six chapters and two appendices. A more thorough description of coal-based electric energy systems is presented in the Introduction and Chapter 1. Each of the subsequent chapters describes technologies for five system components: Western coal resources (Chapter 2), coal transportation (Chapter 3), coal gasification and gas transmission (Chapter 4), and electric power transmission (Chapter 6).

  10. Harmonic Impact of Plug-In Hybrid Electric Vehicle on Electric Distribution System

    Directory of Open Access Journals (Sweden)

    A. Aljanad

    2016-01-01

    Full Text Available This paper presents the harmonic effects of plug-in hybrid electric vehicles (PHEV on the IEEE 37-bus distribution system at different PHEV penetration levels considering a practical daily residential load shape. The PHEV is modeled as a current harmonic source by using the Open-Source Distribution System Simulator (OpenDSS and DSSimpc software. Time series harmonic simulation was conducted to investigate the harmonic impact of PHEV on the system by using harmonic data obtained from a real electric vehicle. Harmonic effects on the system voltage profile and circuit power losses are also investigated by using OpenDSS and MATLAB software. Current/voltage total harmonic distortion (THD produced from the large scale of PHEV is investigated. Test results show that the voltage and current THDs are increased up to 9.5% and 50%, respectively, due to high PHEV penetrations and these THD values are significantly larger than the limits prescribed by the IEEE standards.

  11. Electrical system regulations of the IEA-R1 reactor

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Jose Roberto de; Madi Filho, Tufic, E-mail: jrmello@ipen.br, E-mail: tmfilho@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    The IEA-R1 reactor of the Nuclear and Energy Research Institute (IPEN-CNEN/SP), is a research reactor open pool type, designed and built by the U.S. firm Babcock and Wilcox, having, as coolant and moderator, deionized light water and beryllium and graphite, as reflectors. Until about 1988, the reactor safety systems received power from only one source of energy. As an example, it may be cited the control desk that was powered only by the vital electrical system 220V, which, in case the electricity fails, is powered by the generator group: no-break 220V. In the years 1989 and 1990, a reform of the electrical system upgrading to increase the reactor power and, also, to meet the technical standards of the ABNT (Associacao Brasileira de Normas Tecnicas) was carried out. This work has the objective of showing the relationship between the electric power system and the IEA-R1 reactor security. Also, it demonstrates that, should some electrical power interruption occur, during the reactor operation, this occurrence would not start an accident event. (author)

  12. Brazilian Sign Language Lexicography and Technology: Dictionary, Digital Encyclopedia, Chereme-based Sign Retrieval, and Quadriplegic Deaf Communication Systems.

    Science.gov (United States)

    Capovilla, Fernando C.; Duduchi, Marcelo; Raphael, Walkiria D.; Luz, Renato D.; Rozados, Daniela; Capovilla, Alessandra G. S.; Macedo, Elizeu C.

    2003-01-01

    Discusses the Brazilian Sign language digital encyclopedia, which contains a databank of 5,600 signs glossed in Portuguese and English, along with descriptions and illustrations of their signed form. (Author/VWL)

  13. Systems study for an Integrated Digital-Electric Aircraft (IDEA)

    Science.gov (United States)

    Tagge, G. E.; Irish, L. A.; Bailey, A. R.

    1985-01-01

    The results of the Integrated Digital/Electric Aircraft (IDEA) Study are presented. Airplanes with advanced systems were, defined and evaluated, as a means of identifying potential high payoff research tasks. A baseline airplane was defined for comparison, typical of a 1990's airplane with advanced active controls, propulsion, aerodynamics, and structures technology. Trade studies led to definition of an IDEA airplane, with extensive digital systems and electric secondary power distribution. This airplane showed an improvement of 3% in fuel use and 1.8% in DOC relative to the baseline configuration. An alternate configuration, an advanced technology turboprop, was also evaluated, with greater improvement supported by digital electric systems. Recommended research programs were defined for high risk, high payoff areas appropriate for implementation under NASA leadership.

  14. Assessment of Electric Power Quality in Ships'Modern Systems

    Institute of Scientific and Technical Information of China (English)

    Janusz Mindykowski; XU Xiao-yan

    2004-01-01

    The paper deals with the selected problems of electric power quality in ships'modern systems.In the introduction the fundamentals of electric power quality assessment,such as the relations and consequences among power quality phenomena and indices,secondly as the methods and tools as well as the appropriate instrumentation,have been shortly presented.Afterwards,the basic characteristic of power systems on modern ships has been given.The main focus of the paper is put on the assessment of electric power quality in ships'systems fitted with converter subsystems.The state of the art and actual tendencies in the discussed matter have been shown.Some chosen experimental results,based on the research carried out under supervision of the author,have been presented,too.Finally,some concluding issues have been shortly commented on.

  15. Effects of electric vehicles on power systems in Northern Europe

    DEFF Research Database (Denmark)

    Hedegaard, Karsten; Ravn, Hans; Juul, Nina;

    2012-01-01

    In this study, it is analysed how a large-scale implementation of plug-in hybrid electric vehicles and battery electric vehicles towards 2030 would influence the power systems of five Northern European countries, Denmark, Finland, Germany, Norway, and Sweden. Increasing shares of electric vehicles...... (EVs) are assumed; comprising 2.5%, 15%, 34%, and 53% of the private passenger vehicle fleet in 2015, 2020, 2025, and 2030, respectively. Results show that when charged/discharged intelligently, EVs can facilitate significantly increased wind power investments already at low vehicle fleet shares....... Moreover, due to vehicle-to-grid capability, EVs can reduce the need for new coal/natural gas power capacities. Wind power can be expected to provide a large share of the electricity for EVs in several of the countries. However, if EVs are not followed up by economic support for renewable energy...

  16. Environmental inventories for future electricity supply systems for Switzerland

    Energy Technology Data Exchange (ETDEWEB)

    Dones, R.; Gantner, U.; Hirschberg, S. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Doka, G.; Knoepfel, I. [Eidgenoessische Technische Hochschule, Zurich (Switzerland)

    1996-02-01

    This report provides the analysis of environmental inventories for selected electricity supply systems considered as possible options to meet the expected electricity demand in Switzerland in year 2030. Two possible electricity demand level cases were postulated by VSE, both under the basic assumption of economic growth: a high-growth demand case corresponding to a yearly increase of 2% from year 1995 to year 2010 and 1% from year 2010 to year 2030, and a low-growth demand case corresponding to a yearly increase of 1% from year 1995 to year 2010 and 0.5% from year 2010 to year 2030. The base (i.e. secured) supply in year 2030 will be, according to VSE, totally dominated by hydro with rather minor contributions from combined heat-and-power plants, small gas turbines, incinerators and solar photovoltaic plants. Due to decommissioning of the currently operating nuclear power plants and expiration of long-term electricity import contracts there will eventually occur a gap between the postulated electricity demand and the base supply. VSE provided seven options to cover this gap, defined in terms of mixes with different contributions from gas, coal, nuclear and solar chains; in this context a distinction is also made with respect to shares of domestic and imported electricity. The systems considered represent advanced technologies, regarded as either typical or most suitable for the Swiss conditions. System-specific input to the present analysis has been partially generated based on direct contacts with the industry. Life Cycle Analysis (LCA) was used to establish environmental inventories for the systems analysed. The analysis has been performed on three levels:(1) individually for each system considered, (2) comparison of systems, (3) comparison of supply options. Results are also provided for these three levels.

  17. Evaluation of the automated system Vitek2 for identification and antimicrobial susceptibility testing of Brazilian Gram-positive cocci strains

    Directory of Open Access Journals (Sweden)

    Pedro Alves d'Azevedo

    2009-04-01

    Full Text Available Automated instruments offer many advantages for clinical laboratories. Nevertheless, they can have problems identifying and determining susceptibilities of some pathogens. Vitek® 2 (bioMérieux is an automated system that was recently introduced to Brazil. We evaluated the performance of this equipment for Brazilian isolates that had been characterized using reference identification and antimicrobial susceptibility testing methods. Ninety-nine strains of Gram-positive cocci from a local reference center collection were analyzed, consisting of 50 coagulasenegative Staphylococcus (CoNS and 49 Enterococcus and related species. Vitek® 2 correctly identified 79.8% (79/99 of the isolates. Oxacillin resistance was detected in 76% (19/25 of resistant S. epidermidis strains and in 88% (22/25 of other resistant CoNS species strains. Vancomycin resistance was detected in 100% (20/20 of resistant Enterococcus and related species strains. Vitek® 2 performed very well for the identification of S. epidermidis and non-epidermidis staphylococci, and for the detection of vancomycin resistance in Enterococcus and related species. However, the system needs improvement in order to provide reliable results for the characterization of some CoNS species, identification of Enterococcus and related species and for detecting oxacillin resistance in CoNS.

  18. Challenges to China's transition to a low carbon electricity system

    International Nuclear Information System (INIS)

    We examine the challenges to China's transition to a low carbon electricity system, in which renewable energy would play a significant role. China's electricity system currently lacks the flexibility in planning, operations, and pricing to respond to conflicting pressures from demand growth, rising costs, and environmental mandates in a way that simultaneously maintains reliability, decarbonizes the system, and keeps prices within acceptable bounds. Greater flexibility crucially requires the ability to more systematically and transparently manage and allocate costs. This will require re-orientating sector institutions still rooted in central planning, and strengthening independent regulation. Some of the necessary changes require fundamental political and legal reforms beyond the scope of energy policy. However, the system's flexibility can still be increased through the development of traditional planning and regulatory tools and approaches, such as an avoided cost basis for energy efficiency investments, more integrated planning to improve the coordination of generation, transmission, and demand-side investments, and a transparent ratemaking process. The judicious application of OECD electricity sector experience and skills can support these developments. - Research highlights: → China's electricity system currently lacks the flexibility to integrate renewables and reduce CO2 emissions on a large scale at an acceptable cost and level of reliability. The challenges to increased flexibility are more institutional than technological. → Chinese government agencies need new approaches to basic power system planning and ratemaking. → OECD countries can help address these challenges through the transfer of 'soft' technologies.

  19. Study on High Efficient Electric Vehicle Wireless Charging System

    Science.gov (United States)

    Chen, H. X.; Liu, Z. Z.; Zeng, H.; Qu, X. D.; Hou, Y. J.

    2016-08-01

    Electric and unmanned is a new trend in the development of automobile, cable charging pile can not meet the demand of unmanned electric vehicle. Wireless charging system for electric vehicle has a high level of automation, which can be realized by unmanned operation, and the wireless charging technology has been paid more and more attention. This paper first analyses the differences in S-S (series-series) and S-P (series-parallel) type resonant wireless power supply system, combined with the load characteristics of electric vehicle, S-S type resonant structure was used in this system. This paper analyses the coupling coefficient of several common coil structure changes with the moving distance of Maxwell Ansys software, the performance of disc type coil structure is better. Then the simulation model is established by Simulink toolbox in Matlab, to analyse the power and efficiency characteristics of the whole system. Finally, the experiment platform is set up to verify the feasibility of the whole system and optimize the system. Based on the theoretical and simulation analysis, the higher charging efficiency is obtained by optimizing the magnetic coupling mechanism.

  20. Modeling of Nuclear Electric Propulsion System for Naval Application

    Energy Technology Data Exchange (ETDEWEB)

    Halimi, B.; Suh, K. Y. [Seoul National University, Seoul (Korea, Republic of)

    2009-10-15

    In a number of applications it is required to work for a long periods of time on the ocean, where supply of fuel is complicated and sometimes impossible. Moreover, high efficiency and compactness are the other important requirements in naval application. Therefore, an integrated nuclear electric propulsion system is the best choice to meet all of these requirements. In this paper, a modeling of nuclear electric propulsion for naval application is presented. The model adopted a long-term power system dynamics model to represent the dynamics of nuclear power part.

  1. Electric machine and current source inverter drive system

    Science.gov (United States)

    Hsu, John S

    2014-06-24

    A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

  2. Choice of electric drive synchronization system for lengthy vibration machines

    OpenAIRE

    Романченко, Алексей Владимирович

    2015-01-01

    It not substantiated the feasibility of a powerful electric drive to vibration machines with large longitudinal sizes U-shaped containers. Functional and structural features of vibration machines synchronization systems designed for treatment of long details are analyzed in the article. Advantages and disadvantages of the considered systems are shown. Based on the analysis of information sources found that the appropriate use of synchronization systems without mechanical coupling between driv...

  3. Cold Vacuum Drying (CVD) Electrical System Design Description

    Energy Technology Data Exchange (ETDEWEB)

    SINGH, G.

    2000-05-01

    This system design description (SDD) provides a technical explanation of the design and operation of the electrical system for the Cold Vacuum Drying Facility (CVDF). This SDD also identifies the requirements, and the basis for the requirements and details on how the requirements have been implemented in the design and construction of the facility. This SDD also provides general guidance for the surveillance, testing, and maintenance of this system.

  4. Integrated design by optimization of electrical energy systems

    CERN Document Server

    Roboam, Xavier

    2013-01-01

    This book proposes systemic design methodologies applied to electrical energy systems, in particular integrated optimal design with modeling and optimization methods and tools. It is made up of six chapters dedicated to integrated optimal design. First, the signal processing of mission profiles and system environment variables are discussed. Then, optimization-oriented analytical models, methods and tools (design frameworks) are proposed. A "multi-level optimization" smartly coupling several optimization processes is the subject of one chapter. Finally, a technico-economic optimizatio

  5. Cost analysis of energy storage systems for electric utility applications

    Energy Technology Data Exchange (ETDEWEB)

    Akhil, A. [Sandia National Lab., Albuquerque, NM (United States); Swaminathan, S.; Sen, R.K. [R.K. Sen & Associates, Inc., Bethesda, MD (United States)

    1997-02-01

    Under the sponsorship of the Department of Energy, Office of Utility Technologies, the Energy Storage System Analysis and Development Department at Sandia National Laboratories (SNL) conducted a cost analysis of energy storage systems for electric utility applications. The scope of the study included the analysis of costs for existing and planned battery, SMES, and flywheel energy storage systems. The analysis also identified the potential for cost reduction of key components.

  6. Electrical model simulation for a UHF RFID system

    OpenAIRE

    Abou Chakra, Sara; Farrukh, Usamah O.; Amante García, Beatriz

    2009-01-01

    Radio Frequency IDentification (RFID) deployment is needed for efficient item identification. A simulation environment in HP-ADS (Advanced Design System of Agilent Technologies) of Ultra High Frequency RFID systems is constructed in this paper. This paper simulates the system through an electrical model. The tag is represented by a simple empirical model representing the antenna by an amplifier and the chip. The chip is modeled by its impedance which varies with the...

  7. Assessing Sustainability Transition in the US Electrical Power System

    OpenAIRE

    Stephen McCauley; Scott Jiusto

    2010-01-01

    This paper examines sustainability transition dynamics in the US electricity system, drawing on the socio-technical systems approach. We view system change as unfolding along several critical dimensions and geographical scales, including dynamics in the environment, science, civil society, discourse, and state regulatory institutions, as well as in capital and technology formations. A particular emphasis is given to the interaction of discourses, policy networks, and institutions. We trace fo...

  8. Electricity tariff systems for informatics system design regarding consumption optimization in smart grids

    Directory of Open Access Journals (Sweden)

    Simona Vasilica OPREA

    2016-01-01

    Full Text Available High volume of data is gathered via sensors and recorded by smart meters. These data are processed at the electricity consumer and grid operators' side by big data analytics. Electricity consumption optimization offers multiple advantages for both consumers and grid operators. At the electricity customer level, by optimizing electricity consumption savings are significant, but the main benefits will come from indirect aspects such as avoiding onerous grid investments, higher volume of renewable energy sources' integration, less polluted environment etc. In order to optimize electricity consumption, advanced tariff systems are essential due to the financial incentive they provide for electricity consumers' behaviour change. In this paper several advanced tariff systems are described in details. These systems are applied in England, Spain, Italy, France, Norway and Germany. These systems are compared from characteristics, advantages/disadvantages point of view. Then, different tariff systems applied in Romania are presented. Romanian tariff systems have been designed for various electricity consumers' types. Different tariff systems applied by grid operators or electricity suppliers will be included in the database model that is part of an informatics system for electricity consumption optimization.

  9. Systems and methods for producing electrical discharges in compositions

    KAUST Repository

    Cha, Min Suk

    2015-09-03

    Systems and methods configured to produce electrical discharges in compositions, such as those, for example, configured to produce electrical discharges in compositions that comprise mixtures of materials, such as a mixture of a material having a high dielectric constant and a material having a low dielectric constant (e.g., a composition of a liquid having a high dielectric constant and a liquid having a low dielectric constant, a composition of a solid having a high dielectric constant and a liquid having a low dielectric constant, and similar compositions), and further systems and methods configured to produce materials, such as through material modification and/or material synthesis, in part, resulting from producing electrical discharges in compositions.

  10. Agent Based Control of Electric Power Systems with Distributed Generation

    DEFF Research Database (Denmark)

    Saleem, Arshad

    Distributed generation, decentralized and local control, self organization and autonomy are evident trends of today's electric power systems focusing on innovative control architectures such as MicroGrids, Virtual Power Plants, Cell based systems, plug-in electric vehicles and real time markets...... and subsystems that are able to coordinate, communicate, cooperate, adapt to emerging situations and self organize in an intelligent way. At the same time, rapid development in information and and communication technologies (ICT) have brought new opportunities and elucidations. New Technologies and standards...... have been developed particularly in the area of communication and distributed control. Electric power industry is eager to explore, evaluate and adopt these new advancements in ICT for improving its current practices of automation and control in order to cope with above mentioned challenges...

  11. Vigorous Generation of Electric Power by Implementing Lunar Power System

    Directory of Open Access Journals (Sweden)

    I. Kumaraswamy

    2014-04-01

    Full Text Available This Paper gives an approach to the implementation of Lunar Solar Power (LSP generation. The LSP System is a reasonable alternative to supply earth’s needs for commercial energy without the undesirable characteristics of current options. The long term exploration and colonization of the solar system for scientific research and commercial interest depends critically on the availability of electrical energy. In this paper first we discuss about the present power scenario and to improve the power necessity for the future decades, the construction of LSP station, transmits electricity produced in moon to the earth, preferring microwave for transmitting the electricity, At last we discuss about the cost of installing the project and how to minimize the installation cost.

  12. Design of a Fuel Cell Hybrid Electric Vehicle Drive System

    DEFF Research Database (Denmark)

    Schaltz, Erik

    supply system of the truck which was powered by a lead-acid battery package. The FCSPP includes fuel storage, a fuel cell system, an energy storage device, power electronics, an electric machine, and the necessary control. The FCSPP therefore converts the energy of the fuel to a shaft torque and speed...... of the electric machine. In the thesis the High Temperature Proton Exchange Membrane Fuel Cell (HTPEMFC) is used as it has promising properties for being supplied by reformed methanol, instead of pure hydrogen, which is more practical feasible. It takes approximately 6 minutes before the fuel cell is ready...... to produce power. In this period an energy storage device is necessary in order to provide power for the electric machines, and to heat-up the fuel cell stack. The energy storage device also takes care of the peak loads, the high load dynamics, and it utilizes the braking energy in order to increase...

  13. Optimization of electrical supply systems of oil production installations

    Energy Technology Data Exchange (ETDEWEB)

    Nissenbaum, I.A.; Novoselov, Yu.B.; Tsekhnov, A.N.

    1979-01-01

    The problem of optimization of electrical system assumes determination of the method for constructing the system, the functioning of which would assure minimal values of the technical-economic criterion -- costs, which are the basic economic factor in construction and exploitation of the system. When designing electro-supply systems for oil production installations, in particular, the pump stations, three principal versions of the optimization problem are possible, which are determined by the different conditions of the system, the type of minimizing criteria and volume of optimizing parameters. The most difficult optimization of an electrical system is when it is characterized only by assumed values of active power flow, which are determined by the specific energy requirements of the planned technological processes and the type of equipment used. Second, the more common optimization problem is improvement of the existing electrical network, with established processes and equipment use. The third version is a developing system, in which as a result of introduction of new technological installations, or remodeling of old ones, and which may result in a sharp change or re-distribution of the active power supply. Determining operating regimen of the system and optimization of economic-technical criteria should be a result of large-scale calculation and simulation using a digital computer, and use of iteration and non-linear programming methods.

  14. [Research program for the Brazilian Unified Health System (SUS): the contribution to health management and services in Paraiba State, Brazil].

    Science.gov (United States)

    Celino, Suely Deysny de Matos; Costa, Gabriela Maria Cavalcanti; França, Inácia Sátiro Xavier de; Araújo, Ednaldo Cavalcante de

    2013-01-01

    The shared management in health of the Research Program for the Unified Health System (PPSUS) has the purpose of funding research in priority areas for the health of the Brazilian population. The scope of this qualitative study is to understand the researchers' perception of the contribution of research funded by the PPSUS invitations to bid in the State of Paraiba, for resolving the priority health problems of the Paraiba population, for reducing regional inequalities in health and for bolstering the management of SUS. A documentary survey of the bids and final reports of research and a semi-structured interview with 28 coordinators of these studies was conducted. Triangulation strategy of data was used and subsequently subjected to content analysis, which converged with the categories: solving the health problems; reducing regional inequalities; contribution to management. Paraiba state needs adjustments such that the PPSUS can be fully implemented, ensuring that the knowledge generated can be converted into health policies and actions, since the research funded respond to the health needs of the population and difficulties in SUS management. PMID:23338510

  15. Shading effect on microclimate and thermal comfort indexes in integrated crop-livestock-forest systems in the Brazilian Midwest

    Science.gov (United States)

    Karvatte, Nivaldo; Klosowski, Elcio Silvério; de Almeida, Roberto Giolo; Mesquita, Eduardo Eustáquio; de Oliveira, Caroline Carvalho; Alves, Fabiana Villa

    2016-05-01

    The objective of this paper was to perform a microclimate evaluation and determine the indexes of thermal comfort indexes, in sun and shade, in integrated crop-livestock-forest systems with different arrangements of eucalyptus and native trees, in the Brazilian Midwest. The experiment was conducted at Embrapa Beef Cattle in Campo Grande, state of Mato Grosso do Sul, Brazil, from July to September 2013. The evaluations were conducted on four consecutive days, from 8:00 a.m. to 5:00 p.m., local time (GMT -4:00), with 1 hour intervals, recording the microclimate parameters: air temperature (°C), black globe temperature (°C), wet bulb temperature (°C), relative humidity (%), and wind speed (m.s-1), for the subsequent calculation of the Temperature and Humidity Index, the Black Globe Temperature and Humidity Index, and the Radiant Thermal Load. The largest changes in microclimate parameters were found in the full sun, between 12:00 p.m. and 1:00 p.m., in less dense eucalyptus system, followed by the scattered native trees system, resulting in a maximum Temperature and Humidity Index of 81, Black Globe Temperature and Humidity Index of 88 and Radiant Thermal Load of 794 W m-2. Therefore, it is observed that with the presence of trees in pastures were possible reductions of up to 3.7 % in Temperature and Humidity Index, 10.2 % in the Black Globe Temperature and Humidity Index, and 28.3 % of the Radiant Thermal Load in the shade. Thus, one can conclude that the presence of trees and their arrangement in the systems provide better microclimate conditions and animal thermal comfort in pastures.

  16. Electric Vehicle (EV) Charging Management with Dynamic Distribution System Tariff

    DEFF Research Database (Denmark)

    O'Connell, Niamh; Wu, Qiuwei; Østergaard, Jacob;

    2011-01-01

    An electric vehicle (EV) charging schedule algorithm was proposed in this paper in order to charge EVs to meet EV users’ driving needs with the minimum EV charging cost and respect the local distribution system constraints. A day-ahead dynamic distribution system tariff scheme was proposed to avoid...... congestions in local distribution systems from the day-ahead planning perspective. Locational marginal pricing method was used to determine the dynamic distribution system tariff based on predicted day-ahead spot prices and predicted charging behaviors. Distribution grids of the Bornholm power system were...

  17. Complex Network Analysis of Brazilian Power Grid

    CERN Document Server

    Martins, Gabriela C; Ribeiro, Fabiano L; Forgerini, Fabricio L

    2016-01-01

    Power Grids and other delivery networks has been attracted some attention by the network literature last decades. Despite the Power Grids dynamics has been controlled by computer systems and human operators, the static features of this type of network can be studied and analyzed. The topology of the Brazilian Power Grid (BPG) was studied in this work. We obtained the spatial structure of the BPG from the ONS (electric systems national operator), consisting of high-voltage transmission lines, generating stations and substations. The local low-voltage substations and local power delivery as well the dynamic features of the network were neglected. We analyze the complex network of the BPG and identify the main topological information, such as the mean degree, the degree distribution, the network size and the clustering coefficient to caracterize the complex network. We also detected the critical locations on the network and, therefore, the more susceptible points to lead to a cascading failure and even to a blac...

  18. ACR Electrical Systems. Teacher Edition [and] Student Edition.

    Science.gov (United States)

    Clemons, Mark

    This document contains a teacher's guide and student guide for a high school-level competency-based course in air conditioning and refrigeration (ACR) equipment electrical systems. Presented in the teacher's guide are the following: explanation of the instructional units' use; competency profile for recording students' performance of the tasks in…

  19. Development of Early Warning Methods for Electric Power Systems

    DEFF Research Database (Denmark)

    Jóhannsson, Hjörtur

    This thesis concerns the development of methods that can provide, in realtime, an early warning for an emerging blackout in electric power systems. The blackout in E-Denmark and S-Sweden on September 23, 2003 is the main motivation for the method development. The blackout was caused by occurrence...

  20. 78 FR 69286 - Electric System Construction Policies and Procedures

    Science.gov (United States)

    2013-11-19

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF AGRICULTURE Rural Utilities Service 7 CFR Part 1726 Electric System Construction Policies and Procedures CFR Correction In Title 7 of the Code of Federal Regulations, Parts 1600 to 1759, revised as of January 1,...

  1. Italian electric systems before and after the law reform

    International Nuclear Information System (INIS)

    Bersani's reform is declared to get efficiency gains for the whole electric national system by introducing competitive incentives in the wholesale market. On the contrary, in this paper it is argued that differences in the treatment of the two kinds of consumers (large industrial consumers - free clients - and domestic users - constrained clients) will produce arbitrary re-distributive effects penalising domestic users

  2. System Dynamics Project: The case of Electricity in Shanghai

    NARCIS (Netherlands)

    Yang, Q.; Zhenpeng, Z.

    2014-01-01

    The increasing energy demand in China due to urbanization has made the study of different energy policies in big cities a crucial topic of discussion. This is a complex problem since the electricity market is a multi-actor system where various actors may have a great influence on the main issue we a

  3. Protection from leakage and electric shocks from electrical systems on excavators

    Energy Technology Data Exchange (ETDEWEB)

    Shutskii, V.I.; Zhidkov, V.O.; Shur, N.A.

    1982-05-01

    This paper discusses a protection system developed by the VostNII Institute. System operation reduces hazards associated with leakage currents. General requirements for safety systems used on bucket wheel excavators in coal surface mines are analyzed. Electrical systems of the following excavators are characterized: the EhKG-4.6, EhKG-8I, EhKG-4I, EhKG-6.3Us, EhSh-10/60, EhSh-10/70, EhSh-14/75 and the EhSh-15/90. The ABEhK-1 protection system developed by VostNII controls electrical insulation and safety systems of alternating current systems and direct current systems. Protection system for alternating current is based on the principle of protective shunting which consists in joining a phase in which a leakage occurred with earth by means of a relatively low resistance. Two block schemes of the ABEhK-1 protective system are given. Design and specifications of the control system are discussed. The setting of system operation for single phase leakage ranges from 4 to 15 kiloohm, for three phase from 3.3 to 10 kiloohm, for direct current it does not exceed 60 kiloohm. Operating time for 1 kiloohm resistance of single phase leakage is not higher than 0.1 s, for ineffective shunting, not higher than 0.5 s. Dimensions of the system are: block 200 x 100 x 250 mm, control measuring block 700 x 200 x 500 mm. Economic benefit associated with operation of the ABEhK-1 control system on a bucket wheel excavator amounts to 6300 rubles/year.

  4. Cost Estimates of Electricity from a TPV Residential Heating System

    Science.gov (United States)

    Palfinger, Günther; Bitnar, Bernd; Durisch, Wilhelm; Mayor, Jean-Claude; Grützmacher, Detlev; Gobrecht, Jens

    2003-01-01

    A thermophotovoltaic (TPV) system was built using a 12 to 20 kWth methane burner which should be integrated into a conventional residential heating system. The TPV system is cylindrical in shape and consists of a selective Yb2O3 emitter, a quartz glass tube to prevent the exhaust gases from heating the cells and a 0.2 m2 monocrystalline silicon solar cell module which is water cooled. The maximum system efficiency of 1.0 % was obtained at a thermal input power of 12 kWth. The electrical power suffices to run a residential heating system in the full power range (12 to 20 kWth) independently of the grid. The end user costs of the TPV components - emitter, glass tube, photocells and cell cooling circuit - were estimated considering 4 different TPV scenarios. The existing technique was compared with an improved system currently under development, which consists of a flexible photocell module that can be glued into the boiler housing and with systems with improved system efficiency (1.5 to 5 %) and geometry. Prices of the electricity from 2.5 to 22 EURcents/kWhel (excl. gas of about 3.5 EURcents/kWh), which corresponds to system costs of 340 to 3000 EUR/kWel,peak, were calculated. The price of electricity by TPV was compared with that of fuel cells and gas engines. While fuel cells are still expensive, gas engines have the disadvantage of maintenance, noise and bulkiness. TPV, in contrast, is a cost efficient alternative to produce heat and electricity, particularly in small peripheral units.

  5. Load calculation and system evaluation for electric vehicle climate control

    Energy Technology Data Exchange (ETDEWEB)

    Aceves-Saborio, S.; Comfort, W.J. III

    1993-10-27

    Providing air conditioning for electric vehicles (EVs) represents an important challenge, because vapor compression air conditioners, which are common in gasoline powered vehicles, may consume a substantial part of the total energy stored in the EV battery. This report consists of two major parts. The first part is a cooling and heating load calculation for electric vehicles. The second part is an evaluation of several systems that can be used to provide the desired cooling and heating in EVs. Four cases are studied. Short range and full range EVs are each analyzed twice, first with the regular vehicle equipment, and then with a fan and heat reflecting windows, to reduce hot soak. Recent legislation has allowed the use of combustion heating whenever the ambient temperature drops below 5{degrees}C. This has simplified the problem of heating, and made cooling the most important problem. Therefore, systems described in this project are designed for cooling, and their applicability to heating at temperatures above 5{degrees}C is described. If the air conditioner systems cannot be used to cover the whole heating load at 5{degrees}C, then the vehicle requires a complementary heating system (most likely a heat recovery system or electric resistance heating). Air conditioners are ranked according to their overall weight. The overall weight is calculated by adding the system weight and the weight of the battery necessary to provide energy for system operation.

  6. Establishment of windows-based load management system for electricity cost savings in competitive electricity markets

    International Nuclear Information System (INIS)

    For electricity markets to function in a truly competitive and efficient manner, it is not enough to focus solely on improving the efficiencies of power supply. To recognize price-responsive load as a reliability resource, the customer must be provided with price signals and an instrument to respond to these signals, preferably automatically. This paper attempts to develop the Windows-based load management system in competitive electricity markets, allowing the user to monitor the current energy consumption or billing information, to analyze the historical data, and to implement the consumption strategy for cost savings with nine possible scenarios adopted. Finally, this modeling framework will serve as a template containing the basic concepts that any load management system should address. (author)

  7. Status and modeling improvements of hybrid wind/PV/diesel power systems for Brazilian applications

    Energy Technology Data Exchange (ETDEWEB)

    McGowan, J.G.; Manwell, J.F.; Avelar, C. [Univ. of Massachusetts, Amherst, MA (United States); Taylor, R. [National Renewable Energy Lab., Golden, CO (United States)

    1997-12-31

    This paper present a summary of the ongoing work on the modeling and system design of hybrid wind/PV/diesel systems for two different sites in the Amazonia region of Brazil. The work incorporates the latest resource data and is based on the use of the Hybrid2 simulation code developed by the University of Massachusetts and NREL. Details of the baseline operating hybrid systems are reviewed, and the results of the latest detailed hybrid system evaluation for each site are summarized. Based on the system modeling results, separate recommendations for system modification and improvements are made.

  8. Designing for sustainability - mobility systems based on electrical vehicles

    DEFF Research Database (Denmark)

    Søndergård, Bent; Hansen, Ole Erik

    in interaction with public authorities and transportation companies), configuring the electric car sharing system as an element in an alternative mobility service system, and designing the technical and organizational system The concluding discussion falls into two parts: an assessment of the design process......-design, concerned with design as meta-level processes of regime transformation and the constructive configuration of design spaces. The case study examines an attempt to integrate electric vehicles in the Danish mobility systems. It maps the framework conditions and contemporary (competing) strategies....../projects, but focuses on a specific car-sharing project (‘Cleardrive’), with the objective to examine the early and constitutive stages of the design-process. It is conducted as an intensive study tracing elements of interpretation, interaction and intervention, which have been part of the project formation process...

  9. Development of quick charging system for electric vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Anegawa, Takafumi

    2010-09-15

    Despite low environmental impact and high energy efficiency, electric vehicles (EV) have not been widely accepted. The lack of charging infrastructure is one reason. Since lithium-ion battery has high energy density and low internal resistance that allows quick charging, the convenience of EV may be greatly improved if charging infrastructure is prepared adequately. TEPCO aims for EV spread to reduce CO2 emissions and to increase demand for electric power, and has developed quick charging system for fleet-use EV to improve the convenience of EV. And based on research results, we will propose desirable characteristics of quick charger for public use.

  10. Advanced hybrid and electric vehicles system optimization and vehicle integration

    CERN Document Server

    2016-01-01

    This contributed volume contains the results of the research program “Agreement for Hybrid and Electric Vehicles”, funded by the International Energy Agency. The topical focus lies on technology options for the system optimization of hybrid and electric vehicle components and drive train configurations which enhance the energy efficiency of the vehicle. The approach to the topic is genuinely interdisciplinary, covering insights from fields. The target audience primarily comprises researchers and industry experts in the field of automotive engineering, but the book may also be beneficial for graduate students.

  11. Electric power systems advanced forecasting techniques and optimal generation scheduling

    CERN Document Server

    Catalão, João P S

    2012-01-01

    Overview of Electric Power Generation SystemsCláudio MonteiroUncertainty and Risk in Generation SchedulingRabih A. JabrShort-Term Load ForecastingAlexandre P. Alves da Silva and Vitor H. FerreiraShort-Term Electricity Price ForecastingNima AmjadyShort-Term Wind Power ForecastingGregor Giebel and Michael DenhardPrice-Based Scheduling for GencosGovinda B. Shrestha and Songbo QiaoOptimal Self-Schedule of a Hydro Producer under UncertaintyF. Javier Díaz and Javie

  12. Electric Transport Traction Power Supply System With Distributed Energy Sources

    Science.gov (United States)

    Abramov, E. Y.; Schurov, N. I.; Rozhkova, M. V.

    2016-04-01

    The paper states the problem of traction substation (TSS) leveling of daily-load curve for urban electric transport. The circuit of traction power supply system (TPSS) with distributed autonomous energy source (AES) based on photovoltaic (PV) and energy storage (ES) units is submitted here. The distribution algorithm of power flow for the daily traction load curve leveling is also introduced in this paper. In addition, it illustrates the implemented experiment model of power supply system.

  13. Empowering Variable Renewables - Options for Flexible Electricity Systems

    Energy Technology Data Exchange (ETDEWEB)

    Chandler, Hugo [Renewable Energy Unit, International Energy Agency, Paris (France)

    2008-07-01

    A flexible electricity system is one that can respond reliably, and rapidly, to large fluctuations in supply and demand. Flexibility is already present in all power systems, in order to manage fluctuations in demand, and it is crucial for high performance and economic and reliable operation. This paper looks at measures to increase flexibility. but careful cost/benefit analysis is essential, and specific national and regional circumstances will influence the choice of option(s).

  14. Mobile cockpit system for enhanced electric bicycle use

    OpenAIRE

    João C. Ferreira; Monteiro, Vítor Duarte Fernandes; Afonso, José A.; Afonso, João L.

    2015-01-01

    This paper presents the project of a Mobile Cockpit System (MCS) for smartphones, which provides assistance to Electric Bicycle (EB) cyclists in Smart Cities’ environment. The presented system introduces a mobile application (MCS App) with the goal to provide useful personalized information to the cyclist related with the EB’s use, including EB range prediction considering the intended path, management of the cycling effort performed by the cyclist, handling of the battery charging process an...

  15. The development of multimedia communication system for electric power company

    Energy Technology Data Exchange (ETDEWEB)

    Woo, Hee Gon; Kim, Seong Bok [Korea Electric Power Corp. (KEPCO), Taejon (Korea, Republic of). Research Center

    1995-12-31

    It is a final report of the research project that is a development of PC-LAN based multimedia desktop conference system, which is research on the essential technologies and application and development of multimedia communication services for electric power company. This report is consisted of -Survey and study of the multimedia related technologies, -Multimedia communication protocols and network configurations, and -Design, developments of pilot model, evaluation, and applications of multimedia conference system. (author). 112 refs., 250 figs.

  16. Analysis of Electric Power System Using Data Mining Association Rule

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jun Sub; Kim, Min Soo; Choi, Sang Yule; Kim, Chul Whan; Kim, Ung Mo [Skungkyunkwan University (Korea)

    2001-07-01

    Data Mining is a issue of Database fields. Data mining is discovered optimally interesting rules for user, which are results of specific requirement of user, through past data. Through to analyze and to statical suppose interesting rules, we can prepare future faults of system. In this paper, we present a new way which is discovered and repaired faults of Electric Power system using Data Mining techniques. (author). 15 refs., 4 figs., 1 tab.

  17. Report on emergency electrical power supply systems for nuclear fuel cycle and reactor facilities security systems

    International Nuclear Information System (INIS)

    The report includes information that will be useful to those responsible for the planning, design and implementation of emergency electric power systems for physical security and special nuclear materials accountability systems. Basic considerations for establishing the system requirements for emergency electric power for security and accountability operations are presented. Methods of supplying emergency power that are available at present and methods predicted to be available in the future are discussed. The characteristics of capacity, cost, safety, reliability and environmental and physical facility considerations of emergency electric power techniques are presented. The report includes basic considerations for the development of a system concept and the preparation of a detailed system design

  18. Report on emergency electrical power supply systems for nuclear fuel cycle and reactor facilities security systems

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    The report includes information that will be useful to those responsible for the planning, design and implementation of emergency electric power systems for physical security and special nuclear materials accountability systems. Basic considerations for establishing the system requirements for emergency electric power for security and accountability operations are presented. Methods of supplying emergency power that are available at present and methods predicted to be available in the future are discussed. The characteristics of capacity, cost, safety, reliability and environmental and physical facility considerations of emergency electric power techniques are presented. The report includes basic considerations for the development of a system concept and the preparation of a detailed system design.

  19. Electricity Bill Savings from Residential Photovoltaic Systems: Sensitivities to Changes in Future Electricity Market Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Darghouth, Naim [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Barbose, Galen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Wiser, Ryan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2013-01-09

    Customer-sited photovoltaic (PV) systems in the United States are often compensated at the customer’s underlying retail electricity rate through net metering. Calculations of the customer economics of PV, meanwhile, often assume that retail rate structures and PV compensation mechanisms will not change and that retail electricity prices will increase (or remain constant) over time, thereby also increasing (or keeping constant) the value of bill savings from PV. Given the multitude of potential changes to retail rates and PV compensation mechanisms in the future, however, understanding how such changes might impact the value of bill savings from PV is critical for policymakers, regulators, utilities, the solar industry, and potential PV owners, i.e., any stakeholder interested in understanding uncertainties in and potential changes to the long-term customer economics of PV. This scoping study investigates the impact of, and interactions among, three key sources of uncertainty in the future value of bill savings from customer-sited PV, focusing in particular on residential customers. These three sources of uncertainty are: changes to electricity market conditions that would affect retail electricity prices, changes to the types of retail rate structures available to residential customers with PV, and shifts away from standard net-metering toward other compensation mechanisms for residential PV.

  20. A Survey of Wireless Communications for the Electric Power System

    Energy Technology Data Exchange (ETDEWEB)

    Akyol, Bora A.; Kirkham, Harold; Clements, Samuel L.; Hadley, Mark D.

    2010-01-27

    A key mission of the U.S. Department of Energy (DOE) Office of Electricity Delivery and Energy Reliability (OE) is to enhance the security and reliability of the nation’s energy infrastructure. Improving the security of control systems, which enable the automated control of our energy production and distribution, is critical for protecting the energy infrastructure and the integral function that it serves in our lives. The DOE-OE Control Systems Security Program provides research and development to help the energy industry actively pursue advanced security solutions for control systems. The focus of this report is analyzing how, where, and what type of wireless communications are suitable for deployment in the electric power system and to inform implementers of their options in wireless technologies. The discussions in this report are applicable to enhancing both the communications infrastructure of the current electric power system and new smart system deployments. The work described in this report includes a survey of the following wireless technologies: • IEEE 802.16 d and e (WiMAX) • IEEE 802.11 (Wi-Fi) family of a, b, g, n, and s • Wireless sensor protocols that use parts of the IEEE 802.15.4 specification: WirelessHART, International Society of Automation (ISA) 100.11a, and Zigbee • The 2, 3, and 4 generation (G )cellular technologies of GPRS/EDGE/1xRTT, HSPA/EVDO, and Long-Term Evolution (LTE)/HSPA+UMTS.

  1. Potential of Reversible Solid Oxide Cells as Electricity Storage System

    Directory of Open Access Journals (Sweden)

    Paolo Di Giorgio

    2016-08-01

    Full Text Available Electrical energy storage (EES systems allow shifting the time of electric power generation from that of consumption, and they are expected to play a major role in future electric grids where the share of intermittent renewable energy systems (RES, and especially solar and wind power plants, is planned to increase. No commercially available technology complies with all the required specifications for an efficient and reliable EES system. Reversible solid oxide cells (ReSOC working in both fuel cell and electrolysis modes could be a cost effective and highly efficient EES, but are not yet ready for the market. In fact, using the system in fuel cell mode produces high temperature heat that can be recovered during electrolysis, when a heat source is necessary. Before ReSOCs can be used as EES systems, many problems have to be solved. This paper presents a new ReSOC concept, where the thermal energy produced during fuel cell mode is stored as sensible or latent heat, respectively, in a high density and high specific heat material and in a phase change material (PCM and used during electrolysis operation. The study of two different storage concepts is performed using a lumped parameters ReSOC stack model coupled with a suitable balance of plant. The optimal roundtrip efficiency calculated for both of the configurations studied is not far from 70% and results from a trade-off between the stack roundtrip efficiency and the energy consumed by the auxiliary power systems.

  2. A Survey of the Hazards to Electrical Power Systems

    International Nuclear Information System (INIS)

    This paper presents the preliminary results of a survey of severe accidents and the lessons learned that are important to the design of electrical power systems. This survey of historical accidents since 1952 identified 19 known incidents in which significant fuel melt occurred within a reactor core. In each of these incidents unexpected events or event sequences played an important role. In all cases the event sequences resulted in bypass of two or more levels of defense in depth. This study offers clear lessons for electrical power robustness: 1) Robust design must be based upon a clear understanding of what can go wrong, and 2) Robust design will reduce, but cannot eliminate, the potential for failure of electrical power systems. In order to better understand 'what is the worst that can happen' known hazards are reviewed to identify the challenges that they can present to electrical power systems. Recognizing that unexpected events cannot always be prevented the paper discusses the need for methods to restore plant power sources or provide for alternate power supplies when the plant power sources fail. (authors)

  3. Proposal of Space Reactor for Nuclear Electric Propulsion System

    Science.gov (United States)

    Nagata, Hidetaka; Nishiyama, Takaaki; Nakashima, Hideki

    Currently, the solar battery, the chemical cell, and the RI battery are used for the energy source in space. However, it is difficult for them to satisfy requirements for deep space explorations. Therefore, other electric power sources which can stably produce high electric energy output, regardless of distance from the sun, are necessary to execute such missions. Then, we here propose small nuclear reactors as power sources for deep space exploration, and consider a conceptual design of a small nuclear reactor for Nuclear Electric Propulsion System. It is found from nuclear analyses that the Gas-Cooled reactor could not meet the design requirement imposed on the core mass. On the other hand, a light water reactor is found to be a promising alternative to the Gas-Cooled reactor.

  4. Software for calculation of electric power systems parameters

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, Gustavo; Aromataris, Luis; Donolo, Marcos; Hernandez, Jose; Moitre, Diego [Universidad Nacional de Rio Cuarto, Grupo de Analisis de Sistemas Electricos de Potencia (GASEP), Cordoba (Argentina)

    2003-07-01

    The calculation of power transmission lines parameters of electric energy has a fundamental importance in the design, construction and simulation of electric power systems. Generally, the results obtained are used in the database for the studies of power flow, short circuit and stability . This paper presents a software with graphical interface which allows the estimation of parameters of power transmission lines of electric energy. By means of a tutorial, the user is oriented step by step about the input of data and other features of the line, passing to the calculation stage when the data are correctly and completely entered. The output of the results is shown on the screen on a Pi circuit and through graphics that simulate the voltage drop for a determined load. (Author)

  5. Electric and hybrid vehicle system R/D

    Science.gov (United States)

    Schwartz, H. J.

    1980-01-01

    The work being done to characterize the level of current propulsion technology through component testing is described. Important interactions between the battery and the propulsion system will be discussed. Component development work, involving traction motors, motor controllers and transmissions are described and current results are presented. Studies of advanced electric and hybrid propulsion system studies are summarized and the status of propulsion system development work supported by the project is described. A strategy for fostering joint industry/government projects for commercialization of propulsion components and systems is described briefly.

  6. Reliability modeling of Clinch River breeder reactor electrical shutdown systems

    International Nuclear Information System (INIS)

    The initial simulation of the probabilistic properties of the Clinch River Breeder Reactor Plant (CRBRP) electrical shutdown systems is described. A model of the reliability (and availability) of the systems is presented utilizing Success State and continuous-time, discrete state Markov modeling techniques as significant elements of an overall reliability assessment process capable of demonstrating the achievement of program goals. This model is examined for its sensitivity to safe/unsafe failure rates, sybsystem redundant configurations, test and repair intervals, monitoring by reactor operators; and the control exercised over system reliability by design modifications and the selection of system operating characteristics. (U.S.)

  7. The electric power engineering handbook power system stability and control

    CERN Document Server

    Grisby, Leonard L

    2012-01-01

    With contributions from worldwide leaders in the field, Power System Stability and Control, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) updates coverage of recent developments and rapid technological growth in essential aspects of power systems. Edited by L.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Miroslav Begovic, Prabha Kundur, and Bruce Wollenberg, this reference presents substantially new and revised content. Topics covered include: * Power System Protection * Power System Dynamics and Stability *

  8. EVA Metro Sedan electric-propulsion system: test and evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Reimers, E.

    1979-09-01

    The procedure and results of the performance evaluation of the EVA Metro Sedan (car No. 1) variable speed dc chopper motor drive and its three speed automatic transmission are presented. The propulsion system for a battery powered vehicle manufactured by Electric Vehicle Associates, Valley View, Ohio, was removed from the vehicle, mounted on the programmable electric dynamometer test facility and evaluated with the aid of a hp 3052A Data Acquisition System. Performance data for the automatic transmission, the solid state dc motor speed controller, and the dc motor in the continuous and pulsating dc power mode, as derived on the dynamometer test facility, as well as the entire propulsion system are given. This concept and the system's components were evaluated in terms of commercial applicability, maintainability, and energy utility to establish a design base for the further development of this system or similar propulsion drives. The propulsion system of the EVA Metro Sedan is powered by sixteen 6-volt traction batteries, Type EV 106 (Exide Battery Mfg. Co.). A thyristor controlled cable form Pulsomatic Mark 10 controller, actuated by a foot throttle, controls the voltage applied to a dc series field motor, rated at 10 hp at 3800 rpm (Baldor Electric Co.). Gear speed reduction to the wheel is accomplished by the original equipment three speed automatic transmission with torque converter (Renault 12 Sedan). The brake consists of a power-assisted, hydraulic braking system with front wheel disk and rear drum. An ability to recuperate electric energy with subsequent storage in the battery power supply is not provided.

  9. PROVIDING QUALITY OF ELECTRIC POWER IN ELECTRIC POWER SYSTEM IN PARALLEL OPERATION WITH WIND TURBINE

    Directory of Open Access Journals (Sweden)

    Yu. A. Rolik

    2016-01-01

    Full Text Available The problem of providing electric power quality in the electric power systems (EPS that are equipped with sufficiently long air or cable transmission lines is under consideration. This problem proved to be of particular relevance to the EPS in which a source of electrical energy is the generator of wind turbines since the wind itself is an instable primary energy source. Determination of the degree of automation of voltage regulation in the EPS is reduced to the choice of methods and means of regulation of power quality parameters. The concept of a voltage loss and the causes of the latter are explained by the simplest power system that is presented by a single-line diagram. It is suggested to regulate voltage by means of changing parameters of the network with the use of the method of reducing loss of line voltage by reducing its reactance. The latter is achieved by longitudinal capacitive compensation of the inductive reactance of the line. The effect is illustrated by vector diagrams of currents and voltages in the equivalent circuits of transmission lines with and without the use of longitudinal capacitive compensation. The analysis of adduced formulas demonstrated that the use of this method of regulation is useful only in the systems of power supply with a relatively low power factor (cosφ < 0.7 to 0.9. This power factor is typical for the situation of inclusion the wind turbine with asynchronous generator in the network since the speed of wind is instable. The voltage regulation fulfilled with the aid of the proposed method will make it possible to provide the required quality of the consumers’ busbars voltage in this situation. In is turn, it will make possible to create the necessary conditions for the economical transmission of electric power with the lowest outlay of reactive power and the lowest outlay of active power losses.

  10. Energy system analysis of marginal electricity supply in consequential LCA

    DEFF Research Database (Denmark)

    Lund, Henrik; Mathiesen, Brian Vad; Christensen, Per;

    2010-01-01

    and power (CHP) and fluctuating renewable energy sources, such issue becomes very important. Materials and methods This paper identifies a business-as-usual (BAU) 2030 projection of the Danish energy system. With a high share of both CHP and wind power, such system can be regarded a front...... and their individual marginal production costs. Detailed energy system analysis (ESA) simulation is used to identify the affected technologies, considering the fact that the marginal technology will change from one hour to another, depending on the size of electricity demand compared to, among others, wind power...... and CHP productions. On the basis of such input, a long-term yearly average marginal (YAM) technology is identified and the environmental impacts are calculated using data from ecoinvent. Results The results show how the marginal electricity production is not based solely on the marginal change...

  11. Design and evaluation of hybrid wind/PV/diesel power systems for Brazilian applications

    Energy Technology Data Exchange (ETDEWEB)

    McGowan, J.G.; Manwell, J.F.; Avelar, C. [Univ. of Massachusetts, Amherst, MA (United States); Warner, C. [National Renewable Energy Lab., Golden, CO (United States)

    1996-12-31

    This paper presents a summary of a study centered on the design and evaluation of hybrid wind/PV/diesel systems for remote locations in Brazil. The objective of this work was to evaluate high reliability hybrid power systems that have been designed for the lowest life cycle costs. The technical and economic analysis of the hybrid wind/PV/diesel systems was carried out using HYBRID2, a computational code developed at the University of Massachusetts in conjunction with the National Renewable Energy Laboratory (NREL). After a summary of a generalized design procedure for such systems based on the use of this code, a systematic parametric evaluation of a representative design case for a village power system in Brazil is presented. As summarized in the paper, the performance and economic effects of key design parameters are illustrated. 8 refs., 10 figs.

  12. System Description of the Electrical Power Supply System for the ATLAS Integral Test Loop

    Energy Technology Data Exchange (ETDEWEB)

    Moon, S. K.; Park, J. K.; Kim, Y. S.; Song, C. H.; Baek, W. P

    2007-02-15

    An integral effect test loop for pressurized water reactors (PWRs), the ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation), is constructed by Thermal-Hydraulics Safety Research Team in Korea Atomic Energy Research Institute (KAERI). The ATLAS facility has been designed to have the length scale of 1/2 and area scale of 1/144 compared with the reference plant, APR1400. This report describes the design and technical specifications of the electrical power supply system which supplies the electrical powers to core heater rods, other heaters, various pumps and other systems. The electrical power supply system had acquired the final approval on the operation from the Korea Electrical Safety Corporation. During performance tests for the operation and control, the electrical power supply system showed completely acceptable operation and control performance.

  13. Improving electrical equipment and control systems for shield integrated mining systems

    Energy Technology Data Exchange (ETDEWEB)

    Rabinovich, Z.M.; Starikov, B.Ya.; Kibrik, I.S.

    1984-06-01

    The design and operation are discussed for electrical equipment and control systems for the 1AShchM, the ANShch and the 2ANShch shield integrated face systems consisting of shield supports, coal plow and chain conveyor. The shield system is used for mining inclined and steep coal seams endangered by coal dust explosions, methane or rock bursts. Control and electrical system for 3 types of shield face mining systems is similar. It cuts energy supply when methane content at working faces exceeds the maximum permissible level, controls haulage rate and cutting rate of a coal plow, controls operation of shield supports (using the Sirena system), controls dust suppression system and its water consumption. The system is also equipped with communications equipment. Tests of the control and electrical system for the integrated shield system carried out in the im. Gagarin mine in the Ukraine are described. The VAUS III control system developed by Dongiprouglemash was tested.

  14. TELEVISION IN BRAZILIAN TERRITORY: THE SYSTEM OF BROADCAST AFFILIATED OF REDE GLOBO TELEVISION

    Directory of Open Access Journals (Sweden)

    Eliane Regina Munhoz

    2013-08-01

    Full Text Available The system of broadcast affiliated of Rede Globo Television consolidated in the Brazil in the 1970s, in the scientific and technical information era, with the intensification of technical, informational and normative densities within the national territory. The company, in order to organize this system, established a territorial division of labor that transforms the affiliates in the production units of information to headquarters, while it produces the bulk of programming that is transmitted by affiliates. The existence of a technosfera and a psichosfera creates the conditions so that this system operates with a high territorial capillarity and vertically imposes its transmition everywhere.

  15. Multimegawatt nuclear power systems for nuclear electric propulsion

    Science.gov (United States)

    George, Jeffrey A.

    1991-01-01

    Results from systems analysis studies of multimegawatt nuclear power systems are presented for application to nuclear electric propulsion. Specific mass estimates are presented for nearer term SP-100 reactor-based potassium Rankine and Brayton power systems for piloted and cargo missions. Growth SP-100/Rankine systems were found to range from roughly 7 to 10 kg/kWe specific mass depending on full power life requirements. The SP-100/Rankine systems were also found to result in a 4-kg/kWe savings in specific mass over SP-100/Brayton systems. The potential of advanced, higher temperature reactor and power conversion technologies for achieving reduced mass Rankine and Brayton systems was also investigated. A target goal of 5 kg/kWe specific mass was deemed reasonable given either 1400 K potassium Rankine with 1500 K lithium-cooled reactors or 2000 K gas cooled reactors with Brayton conversion.

  16. Electromagnetic interference in electrical systems of motor vehicles

    Science.gov (United States)

    Dziubiński, M.; Drozd, A.; Adamiec, M.; Siemionek, E.

    2016-09-01

    Electronic ignition system affects the electronic equipment of the vehicle by electric and magnetic fields. The measurement of radio electromagnetic interference originating from the ignition system affecting the audiovisual test bench was carried out with a variable speed of the ignition system. The paper presents measurements of radio electromagnetic interference in automobiles. In order to determine the level of electromagnetic interference, the audiovisual test bench was equipped with a set of meters for power consumption and assessment of the level of electromagnetic interference. Measurements of the electromagnetic interference level within the audiovisual system were performed on an experimental test bench consisting of the ignition system, starting system and charging system with an alternator and regulator.

  17. Optimal design of a hybrid photovoltaic and fuel cell power generation system, to supply isolated communities in the Brazilian Amazon; Dimensionamento otimo de sistemas hibridos, com geracao fotovoltaica e celula a combustivel, para atendimento a comunidades isoladas na Amazonia

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Sergio Batista da

    2010-11-15

    The lack of electricity in isolated communities in the Brazilian Amazon has become one of the greatest barrier for the development of the region. Currently, the main technologies that provide electricity to these communities are diesel generators, batteries and dry cells. These non-renewable energy sources may pose serious problems to the environment and human health and have high maintenance and operational costs. Therefore, the search for renewable energy sources, such as water and sunlight, which are highly abundant in the region, has become a great challenge. This thesis presents the studies on application of solar photovoltaic (PV) and fuel cell (FC) technologies to supply electric power in an uninterrupted manner. Outlined are the technical and cost issues of a pilot project set up in an environmentally protected area, next to Bananal island, located in the Southwestern region of the state of Tocantins. The pilot project relies on PV solar power as the primary source of energy for the production of electricity. The surplus energy is stored in the form of hydrogen produced by electrolysis of the water supplied locally, which is reconverted into electric power by fuel cells during periods when there is little or no sunlight. In this context, the aim of the study was to propose a sizing of a hybrid distributed generation system (HDGS), comprised of a PV system, FC and batteries, that optimizes implementation and operational costs, as a potential source of energy for isolated communities in the Amazon. The work was carried out with the help of simulation software HOMER (Hybrid Optimization Model for Electric Renewable) developed by National Renewable Energy Laboratory (NREL). Simulations and a comparative study were carried out of the technologies and potential configurations that meet the needs of these isolated communities. The results showed an optimal solution of HGDS PV-FC batteries with a reduction in the initial cost of the project in about 60% compared to

  18. Electrical load management for the California water system

    Energy Technology Data Exchange (ETDEWEB)

    Krieg, B.; Lasater, I.; Blumstein, C.

    1977-07-01

    To meet its water needs California has developed an extensive system for transporting water from areas with high water runoff to areas with high water demand. This system annually consumes more than 6 billion kilowatt hours (kWh) of electricity for pumping water and produces more than 12 billion kWh/year of hydroelectric power. From the point of view of energy conservation, the optimum operation of the California water supply system would require that pumping be done at night and generation be done during the day. Night pumping would reduce electric power peak load demand and permit the pumps to be supplied with electricity from ''base load'' generating plants. Daytime hydro power generation would augment peak load power generation by fossil-fuel power plants and save fuel. The technical and institutional aspects of this type of electric power load management for water projects are examined for the purpose of explaining some of the actions which might be pursued and to develop recommendations for the California Energy Resources Conservation and Development Commission (ERCDC). The California water supply system is described. A brief description is given of various energy conservation methods, other than load management, that can be used in the management of water resources. An analysis of load management is presented. Three actions for the ERCDC are recommended: the Commission should monitor upcoming power contract negotiations between the utilities and the water projects; it should determine the applicability of the power-pooling provisions of the proposed National Energy Act to water systems; and it should encourage and support detailed studies of load management methods for specific water projects.

  19. Reliability and maintainability analysis of electrical system of drum shearers

    Institute of Scientific and Technical Information of China (English)

    SEYED Hadi Hoseinie; MOHAMMAD Ataei; REZA Khalokakaie; UDAY Kumar

    2011-01-01

    The reliability and maintainability of electrical system of drum shearer at Parvade.l Coal Mine in central Iran was analyzed. The maintenance and failure data were collected during 19 months of shearer operation. According to trend and serial correlation tests, the data were independent and identically distributed (iid) and therefore the statistical techniques were used for modeling. The data analysis show that the time between failures (TBF) and time to repair (TTR) data obey the lognormal and Weibull 3 parameters distribution respectively. Reliability-based preventive maintenance time intervals for electrical system of the drum shearer were calculated with regard to reliability plot. The reliability-based maintenance intervals for 90%, 80%, 70% and 50% reliability level are respectively 9.91, 17.96, 27.56 and 56.1 h. Also the calculations show that time to repair (TTR) of this system varies in range 0.17-4 h with 1.002 h as mean time to repair (MTTR). There is a 80% chance that the electrical system of shearer of Parvade.l mine repair will be accomplished within 1.45 h.

  20. Architecture Optimization of More Electric Aircraft Actuation System

    Institute of Scientific and Technical Information of China (English)

    QI Haitao; FU Yongling; QI Xiaoye; LANG Yan

    2011-01-01

    The optional types of power source and actuator in the aircraft are more and more diverse due to fast development in more electric technology,which makes the combinations of different power sources and actuators become extremely complex in the architecture optimization process of airborne actuation system.The traditional “trial and error” method cannot satisfy the design demands.In this paper,firstly,the composition of more electric aircraft(MEA) flight control actuation system(FCAS) is introduced,and the possible architecture quantity is calculated.Secondly,the evaluation criteria of FCAS architecture with respect to safe reliability,weight and efficiency are proposed,and the evaluation criteria values are calculated in the case that each control surface adopts the same actuator configuration.Finally,the optimization results of MEA FCAS architecture are obtained by applying genetic algorithm(GA).Compared to the traditional actuation system architecture,which only adopts servo valve controlled hydraulic actuators,the weight of the optimized more electric actuation system architecture can be reduced by 6%,and the efficiency can be improved by 30% based on the safe reliability requirements.

  1. Hybrid and electric advanced vehicle systems (heavy) simulation

    Science.gov (United States)

    Hammond, R. A.; Mcgehee, R. K.

    1981-01-01

    A computer program to simulate hybrid and electric advanced vehicle systems (HEAVY) is described. It is intended for use early in the design process: concept evaluation, alternative comparison, preliminary design, control and management strategy development, component sizing, and sensitivity studies. It allows the designer to quickly, conveniently, and economically predict the performance of a proposed drive train. The user defines the system to be simulated using a library of predefined component models that may be connected to represent a wide variety of propulsion systems. The development of three models are discussed as examples.

  2. Automotive Technology Evolved by Electrical and Electronic Systems

    Science.gov (United States)

    Teratani, Tatsuo; Okuma, Shigeru

    Automotive electrical and electronic systems, e.g. EHV, FCV, future X-By-Wire, have recently been introduced or planned in place of mechanical systems. Drivers are demanding environmental performance (fuel consumption and weight reduction), safety and comfort. For general use of the new technologies, evolution of the automotive technology is required, including energy conversion efficiency improvement, size and weight reduction of components, cost reduction and high reliability. This paper discusses and summarizes the next generation power systems, the future vehicle image, power source combinations, and problems to be solved for development of automotive electronics.

  3. Value analysis of wind energy systems to electric utilities

    Energy Technology Data Exchange (ETDEWEB)

    Percival, D.; Harper, J.

    1981-01-01

    A method has been developed for determining the value of utility-operated wind energy systems to electric utilities. The analysis is performed by a package of computer models that interface with most conventional utility planning models. Weather data are converted to wind turbine output powers, which are used to modify the utility load representation. Execution of the utility planning models with both the original and modified load representation yields the gross and marginal value ($/rated kW/) of the added wind energy systems. This value is then compared with cost estimates to determine if for economic reasons the wind energy system should be included in future generation plans.

  4. Ashing vs. electric generation in accelerator driven system

    International Nuclear Information System (INIS)

    Accelerator Driven Systems have been conceived as an alternative for the processing of the radioactive wastes contained in spent fuel elements from nuclear power plants. These systems are formed by the coupling of a nuclear reactor - preferably a subcritical reactor - with a particle accelerator providing particles with energy in the order of the GeV. The long-lived fission products and actinides of the spent fuels are transformed by nuclear reactions in stable isotopes or in short-lived radioisotopes. The basic parameters for the electric energy production of the different systems are analysed. (author)

  5. Study on Characteristic of Electric Power Assist Steering System

    Institute of Scientific and Technical Information of China (English)

    许镇琳; 王豪; 尚喆; 张海华; 王家军

    2003-01-01

    A pinion-type electric power steering (EPS) equipped on a sedan is reached in this paper. A three-freedom dynamic model of this system is created. The variables affecting assist character is analyzed. The formulas of simpled steering resistance force and the relationship between assist gain and vehicle speed are presented for the first time. Assist character is found based on the parameters of a sedan at last. This assist character is fit for the control rule of the EPS system through analyzing this character. The assist character figure offers reference for system design and control. Furthermore, this research method has generality for assist character of different kinds of vehicles.

  6. Electric Loading Simulation System for Missile Wings and Rudders

    Institute of Scientific and Technical Information of China (English)

    QI Rong; LIN Hui; CHEN Ming

    2006-01-01

    The design and the realization of missile wings and rudders loading simulation system based on digital signal processor (DSP) TMS320LF2407 and direct torque control (DTC) servo driver ACS600 are discussed. The structure and opration principle for the system are presented. Speediness and elimination of superabundant torque are two key difficulties for electric loading simulation system. The method which can eliminate the superabundant torque is researched. Test results show the airflow resistance when missile wings and rudders are spreading can be rapidly simulated with high accuracy.

  7. Forecasting of Hourly Photovoltaic Energy in Canarian Electrical System

    Science.gov (United States)

    Henriquez, D.; Castaño, C.; Nebot, R.; Piernavieja, G.; Rodriguez, A.

    2010-09-01

    The Canarian Archipelago face similar problems as most insular region lacking of endogenous conventional energy resources and not connected to continental electrical grids. A consequence of the "insular fact" is the existence of isolated electrical systems that are very difficult to interconnect due to the considerable sea depths between the islands. Currently, the Canary Islands have six isolated electrical systems, only one utility generating most of the electricity (burning fuel), a recently arrived TSO (REE) and still a low implementation of Renewable Energy Resources (RES). The low level of RES deployment is a consequence of two main facts: the weakness of the stand-alone grids (from 12 MW in El Hierro up to only 1 GW in Gran Canaria) and the lack of space to install RES systems (more than 50% of the land protected due to environmental reasons). To increase the penetration of renewable energy generation, like solar or wind energy, is necessary to develop tools to manage them. The penetration of non manageable sources into weak grids like the Canarian ones causes a big problem to the grid operator. There are currently 104 MW of PV connected to the islands grids (Dec. 2009) and additional 150 MW under licensing. This power presents a serious challenge for the operation and stability of the electrical system. ITC, together with the local TSO (Red Eléctrica de España, REE) started in 2008 and R&D project to develop a PV energy prediction tool for the six Canarian Insular electrical systems. The objective is to supply reliable information for hourly forecast of the generation dispatch programme and to predict daily solar radiation patterns, in order to help program spinning reserves. ITC has approached the task of weather forecasting using different numerical model (MM5 and WRF) in combination with MSG (Meteosat Second Generation) images. From the online data recorded at several monitored PV plants and meteorological stations, PV nominal power and energy produced

  8. Second to none: Brazilian, Mexican oil giants turn to Canadian satellite system for eagle eye on offshore spills

    Energy Technology Data Exchange (ETDEWEB)

    Cramp, B.

    2001-07-02

    The use by Petrobras of Canada's RADARSAT-1 earth observation satellite imaging system to determine the characteristics of the developing environmental disaster when the world's largest oil rig afloat, owned by Petrobras, was sinking of the Brazilian coast following a series of three explosions which seriously damaged the rig. RADARSAT-1 was pressed into service to determine the fate of the oil slick in terms of where it was heading and how soon it would get there, information that is vital to directing clean-up efforts to minimize the damage. RADARSAT-1 was also involved in responding to a tanker oil spill in January 2001 that threatened the Galapagos Islands off the coast of Ecuador. PEMEX, the Mexican state oil company also uses RADARSAT-1 satellite imagery to monitor its nearly 400 marine oil operations in the Gulf of Mexico. RADARSAT-1, launched in 1995 by the Canadian Space Agency, is well known for its reliability, regularity and rapidity. It is equipped with microwave sensors, which can be relied on to produce usable imagery 96 to 97 per cent of the time. It can acquire imagery day or night under any atmospheric conditions through its ability to penetrate darkness, cloud, rain or haze. This is crucial when tracking oil slicks in the ocean where clouds and haze are common, especially near or in the equatorial zones. RADARSAT-1 works by transmitting microwave energy, bouncing it off the earth's surface and back to the satellite. The returning signals are received and stored by the satellite as data. Oil slicks as small as 100 metres long can be detected from space by RADARSAT-1.

  9. Detection System Design of Electric Vehicle Wiring Harness

    Institute of Scientific and Technical Information of China (English)

    SUN Jian-Xin; LI Xiao-Peng

    2015-01-01

    This paper introduces a method of harness testing system for electric vehicle wiring harness wiring .The system has implemented some commonly used electric wiring harness state detection using the way of the upper machine and lower machine communicate with each other, Such as normal, open circuit, short circuit, fault, etc. And then the lower machine send the wiring harness status to the upper machine, and then the upper machine parses the line state, and at the same time shows the test results, And then stores the test results in the database. After all, we can call at any time to check the date and the results of detection. It changes the traditional manual test mode of operation and Implements the detection process of automation and intellectualization.

  10. Analysis of Electric Propulsion System for Exploration of Saturn

    Directory of Open Access Journals (Sweden)

    Carlos Renato Huaura Solórzano

    2009-01-01

    Full Text Available Exploration of the outer planets has experienced new interest with the launch of the Cassini and the New Horizons Missions. At the present time, new technologies are under study for the better use of electric propulsion system in deep space missions. In the present paper, the method of the transporting trajectory is used to study this problem. This approximated method for the flight optimization with power-limited low thrust is based on the linearization of the motion of a spacecraft near a keplerian orbit that is close to the transfer trajectory. With the goal of maximizing the mass to be delivered in Saturn, several transfers were studied using nuclear, radioisotopic and solar electric propulsion systems.

  11. International conference in electrical engineering and intelligent systems

    CERN Document Server

    Gelman, Len; Electrical Engineering and Intelligent Systems

    2013-01-01

    The revised and extended papers collected in this volume represent the cutting-edge of research at the nexus of electrical engineering and intelligent systems. They were selected from well over 1000 papers submitted to the high-profile international World Congress on Engineering held in London in July 2011. The chapters cover material across the full spectrum of work in the field, including computational intelligence, control engineering, network management, and wireless networks. Readers will also find substantive papers on signal processing, Internet computing, high performance computing, and industrial applications.   The Electrical Engineering and Intelligent Systems conference, as part of the 2011 World Congress on Engineering was organized under the auspices of the non-profit International Association of Engineers (IAENG). With more than 30 nations represented on the conference committees alone, the Congress features the best and brightest scientific minds from a multitude of disciplines related to eng...

  12. On the Massive Antenna Suspension System in the Brazilian Gravitational Wave Detector SCHENBERG

    Science.gov (United States)

    da Silva Bortoli, Fabio; Frajuca, Carlos; de Sousa, Sergio Turano; de Waard, Arlette; Magalhaes, Nadja Simao; de Aguiar, Odylio Denys

    2016-06-01

    SCHENBERG is a resonant-mass gravitational wave detector built in Brazil. Its spherical antenna, weighting 1.15 t, is connected to the outside world by a suspension system whose main function is to attenuate the external seismic noise. In this work, we report how the system was modeled using finite elements method. The model was validated on experimental data. The simulation showed that the attenuation obtained is of the order of 260 dB, which is sufficient for decreasing the seismic noise below the level of the thermal noise of the detector operating at 50 mK.

  13. Advances in Optimizing Weather Driven Electric Power Systems.

    Science.gov (United States)

    Clack, C.; MacDonald, A. E.; Alexander, A.; Dunbar, A. D.; Xie, Y.; Wilczak, J. M.

    2014-12-01

    The importance of weather-driven renewable energies for the United States (and global) energy portfolio is growing. The main perceived problems with weather-driven renewable energies are their intermittent nature, low power density, and high costs. The National Energy with Weather System Simulator (NEWS) is a mathematical optimization tool that allows the construction of weather-driven energy sources that will work in harmony with the needs of the system. For example, it will match the electric load, reduce variability, decrease costs, and abate carbon emissions. One important test run included existing US carbon-free power sources, natural gas power when needed, and a High Voltage Direct Current power transmission network. This study shows that the costs and carbon emissions from an optimally designed national system decrease with geographic size. It shows that with achievable estimates of wind and solar generation costs, that the US could decrease its carbon emissions by up to 80% by the early 2030s, without an increase in electric costs. The key requirement would be a 48 state network of HVDC transmission, creating a national market for electricity not possible in the current AC grid. These results were found without the need for storage. Further, we tested the effect of changing natural gas fuel prices on the optimal configuration of the national electric power system. Another test that was carried out was an extension to global regions. The extension study shows that the same properties found in the US study extend to the most populous regions of the planet. The extra test is a simplified version of the US study, and is where much more research can be carried out. We compare our results to other model results.

  14. Example Solar Electric Propulsion System asteroid tours using variational calculus

    Science.gov (United States)

    Burrows, R. R.

    1985-01-01

    Exploration of the asteroid belt with a vehicle utilizing a Solar Electric Propulsion System has been proposed in past studies. Some of those studies illustrated multiple asteroid rendezvous with trajectories obtained using approximate methods. Most of the inadequacies of those approximations are overcome in this paper, which uses the calculus of variations to calculate the trajectories and associated payloads of four asteroid tours. The modeling, equations, and solution techniques are discussed, followed by a presentation of the results.

  15. Catalog of components for electric and hybrid vehicle propulsion systems

    Science.gov (United States)

    Eissler, H. C.

    1981-01-01

    This catalog of commercially available electric and hybrid vehicle propulsion system components is intended for designers and builders of these vehicles and contains 50 categories of components. These categories include those components used between the battery terminals and the output axle hub, as well as some auxiliary equipment. An index of the components and a listing of the suppliers and their addresses and phone numbers are included.

  16. Comparison of Systems for Levitation Heating of Electrically Conductive Bodies

    Directory of Open Access Journals (Sweden)

    Ivo Dolezel

    2004-01-01

    Full Text Available Levitation heating of nonmagnetic electrically conductive bodies can be realized in various systems consisting of one of more inductors. The paper deals with compassion of the resultant. Lorentz lifts force acting on such a body (cylinder, sphere and velocity of its heating for different shapes of coils and parameters of the field currents (amplitudes, frequency. The tack is solved in quasi-coupled formulation. Theoretical considerations are supplemented with an illustrative example whose results are discussed.

  17. Impacts and Utilization of Electric Vehicles Integration Into Power Systems

    Institute of Scientific and Technical Information of China (English)

    HUZechun; SONG Yonghua; XU Zhiwei; LUO Zhuowei; ZHAN Kaiqiao; JIA Long

    2012-01-01

    With the increasing of electric vehicles (EVs) penetration in power grids, the charging of EVs will have significant impacts on power system planning and operation. It is necessary to note that the majority of EVs are not in use in most of the time in a day. Therefore, the onboard batteries can be utilized as energy storage devices. This article reviews and discusses the current related research in the following areas.

  18. An algorithm for model reduction in large electric power systems

    Directory of Open Access Journals (Sweden)

    Ze?evi? A. I.

    1998-01-01

    Full Text Available Model reduction has become an important issue in the analysis of electric power systems, due to their constantly increasing size and complexity. In this paper we present a decomposition algorithm which is capable of reducing the number of equations in the model, while preserving the potential for parallel computation. A variety of experimental results are provided to illustrate the performance of the algorithm.

  19. Battery model for electrical power system energy balance

    Science.gov (United States)

    Hafen, D. P.

    1983-01-01

    A model to simulate nickel-cadmium battery performance and response in a spacecraft electrical power system energy balance calculation was developed. The voltage of the battery is given as a function of temperature, operating depth-of-charge (DOD), and battery state-of-charge. Also accounted for is charge inefficiency. A battery is modeled by analysis of the results of a multiparameter battery cycling test at various temperatures and DOD's.

  20. The Norwegian Electric Power System - System Description and Future Developments; Norsk kraftforsyning - dagens system og fremtidig utvikling

    Energy Technology Data Exchange (ETDEWEB)

    Hagen, Janne Merete; Nystuen, Kjell Olav; Fridheim, Haavard; Rutledal, Frode

    2000-09-01

    This report presents a description of the present Norwegian electric power system, as well as a discussion of emerging trends and future developments in this system. The report provides the basis for FFI's current vulnerability analysis of the electric power system. Norway's electric power system is getting increasingly complex, due to a large-scale implementation of electronic components and information systems. Workforce reductions and efficiency improvements dominate the development of the electric power sector. Norway is also becoming increasingly dependent on foreign power sources. These trends provide for an entirely different electric power system than just a few years ago. Also, these trends make it virtually impossible to present a ''static'' description of the system. Thus, the report also contains a scenario, describing possible future developments of the system until 2010. (author)

  1. Optimizing the robustness of electrical power systems against cascading failures

    CERN Document Server

    Zhang, Yingrui

    2016-01-01

    Electrical power systems are one of the most important infrastructures that support our society. However, their vulnerabilities have raised great concern recently due to several large-scale blackouts around the world. In this paper, we investigate the robustness of power systems against cascading failures initiated by a random attack. This is done under a simple yet useful model based on global and equal redistribution of load upon failures. We provide a complete understanding of system robustness by i) deriving an expression for the final system size as a function of the size of initial attacks; ii) deriving the critical attack size after which system breaks down completely; iii) showing that complete system breakdown takes place through a first-order (i.e., discontinuous) transition in terms of the attack size; and iv) establishing the optimal load-capacity distribution that maximizes robustness. In particular, we show that robustness is maximized when the difference between the capacity and initial load is...

  2. Generation of a tunable environment for electrical oscillator systems.

    Science.gov (United States)

    León-Montiel, R de J; Svozilík, J; Torres, Juan P

    2014-07-01

    Many physical, chemical, and biological systems can be modeled by means of random-frequency harmonic oscillator systems. Even though the noise-free evolution of harmonic oscillator systems can be easily implemented, the way to experimentally introduce, and control, noise effects due to a surrounding environment remains a subject of lively interest. Here, we experimentally demonstrate a setup that provides a unique tool to generate a fully tunable environment for classical electrical oscillator systems. We illustrate the operation of the setup by implementing the case of a damped random-frequency harmonic oscillator. The high degree of tunability and control of our scheme is demonstrated by gradually modifying the statistics of the oscillator's frequency fluctuations. This tunable system can readily be used to experimentally study interesting noise effects, such as noise-induced transitions in systems driven by multiplicative noise, and noise-induced transport, a phenomenon that takes place in quantum and classical coupled oscillator networks.

  3. An integrated analytic tool and knowledge-based system approach to aerospace electric power system control

    Science.gov (United States)

    Owens, William R.; Henderson, Eric; Gandikota, Kapal

    1986-10-01

    Future aerospace electric power systems require new control methods because of increasing power system complexity, demands for power system management, greater system size and heightened reliability requirements. To meet these requirements, a combination of electric power system analytic tools and knowledge-based systems is proposed. The continual improvement in microelectronic performance has made it possible to envision the application of sophisticated electric power system analysis tools to aerospace vehicles. These tools have been successfully used in the measurement and control of large terrestrial electric power systems. Among these tools is state estimation which has three main benefits. The estimator builds a reliable database for the system structure and states. Security assessment and contingency evaluation also require a state estimator. Finally, the estimator will, combined with modern control theory, improve power system control and stability. Bad data detection as an adjunct to state estimation identifies defective sensors and communications channels. Validated data from the analytic tools is supplied to a number of knowledge-based systems. These systems will be responsible for the control, protection, and optimization of the electric power system.

  4. Quality Evaluation of the Brazilian Higher Education System: Relevance, Diversity, Equity and Effectiveness

    Science.gov (United States)

    Bertolin, Julio; Leite, Denise

    2008-01-01

    Over the past few years, marketisation-focused public policies have significantly transformed higher education systems worldwide. In developing countries that do not have public universities, there has been a reduction of public financing and the expansion of private institutions. In Brazil, one of the main developing countries in the world…

  5. Retention system for implant-supported dentures used by brazilian dentists who work in implant dentistry

    Directory of Open Access Journals (Sweden)

    Saturnino Aparecido Ramalho

    2010-04-01

    Full Text Available Objective: To provide the dentists with support in the choice of the cement or screw type of retention for implant-supported dentures, according to the patient’s problem. Methods: An opinion questionnaire was applied to a sample of 468 participants, all dentists working in the field of Implant Dentistry, of whom 272 (58.1% participated in the 4th International Congress of Osseointegration of APCD, held in São Paulo (SP from 6 to 9 May 2004, 119 (25.4% participated in the 2nd International Congress of Implant Dentistry of Minas Gerais, between 10 and 12 June 2004 and 77 (16.5% were professors and specialization and master students from São Leopoldo Mandic. Results: The results showed that 254 participants opted for the screw-retained system while 214 opted for the cement-retained system. Conclusion: There was a preference for the use of the screw-retained system, and that both cemented and screw-retained systems have advantages and disadvantages, so that the dentist is left to decide and evaluate them in order to indicate and use them with confidence in different clinical cases.

  6. Prestorm estimation of hurricane damage to electric power distribution systems.

    Science.gov (United States)

    Guikema, Seth D; Quiring, Steven M; Han, Seung-Ryong

    2010-12-01

    Hurricanes frequently cause damage to electric power systems in the United States, leading to widespread and prolonged loss of electric service. Restoring service quickly requires the use of repair crews and materials that must be requested, at considerable cost, prior to the storm. U.S. utilities have struggled to strike a good balance between over- and underpreparation largely because of a lack of methods for rigorously estimating the impacts of an approaching hurricane on their systems. Previous work developed methods for estimating the risk of power outages and customer loss of power, with an outage defined as nontransitory activation of a protective device. In this article, we move beyond these previous approaches to directly estimate damage to the electric power system. Our approach is based on damage data from past storms together with regression and data mining techniques to estimate the number of utility poles that will need to be replaced. Because restoration times and resource needs are more closely tied to the number of poles and transformers that need to be replaced than to the number of outages, this pole-based assessment provides a much stronger basis for prestorm planning by utilities. Our results show that damage to poles during hurricanes can be assessed accurately, provided that adequate past damage data are available. However, the availability of data can, and currently often is, the limiting factor in developing these types of models in practice. Opportunities for further enhancing the damage data recorded during hurricanes are also discussed. PMID:21039701

  7. Electrical Dissipative Structures in Membrane-Coupled Compartment Systems

    Science.gov (United States)

    Feudel, U.; Feistel, R.; Ebeling, W.

    Reaction-diffusion systems with charged particles are studied. Conditions for the arising of electrical dissipative structures in a compartment system consisting of two boxes separated by a membrane are derived. The appearance of a polar dissipative structure is proved for a simple capacitor model in combination with a simple second order chemical kinetics which leads to an analytically solvable problem. Electrical dissipative structures can in principle be considered as non equilibrium electrical batteries. The theoretical efficiency of such batteries is estimated.Translated AbstractElektrische Dissipative Strukturen in Membrangekoppelten SystemenEs werden Reaktions-Diffusionssysteme mit geladenen Teilchen studiert. Bedingungen für die Entstehung elektrischer dissipativer Strukturen in einem Kompartment-System, bestehend aus zwei durch eine Membran getrennten Zellen werden abgeleitet. Die Entstehung einer polaren dissipativen Struktur wird für ein einfaches Kondensatorenmodell in Kombination mit einer einfachen chemischen Kinetik, das analytische Lösbarkeit gestattet, nachgewiesen. Elektrische dissipative Strukturen können im Prinzip als elektrische Batterien fern von Gleichgewicht betrachtet werden. Der theoretische Wirkungsgrad einer solchen Batterie wird berechnet.

  8. Method and system employing graphical electric load categorization to identify one of a plurality of different electric load types

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Yi; Du, Liang

    2016-09-13

    A system for different electric loads includes sensors structured to sense voltage and current signals for each of the different electric loads; a hierarchical load feature database having a plurality of layers, with one of the layers including a plurality of different load categories; and a processor. The processor acquires voltage and current waveforms from the sensors for a corresponding one of the different electric loads; maps a voltage-current trajectory to a grid including a plurality of cells, each of which is assigned a binary value of zero or one; extracts a plurality of different features from the mapped grid of cells as a graphical signature of the corresponding one of the different electric loads; derives a category of the corresponding one of the different electric loads from the database; and identifies one of a plurality of different electric load types for the corresponding one of the different electric loads.

  9. The e-NutriHS: a web-based system for a Brazilian cohort study.

    Science.gov (United States)

    Folchetti, Luciana D; da Silva, Isis T; de Almeida Pititto, Bianca; Ferreira, Sandra R G

    2015-01-01

    The e-NutriHS is a web-based system developed to gather online information on health of a cohort of college students and graduates in nutrition. It consists of six validated and internationally recognized questionnaires regarding demographic and socioeconomic data, dietary habits, physical activity level, alcohol and tobacco use, anti-fat attitudes and personal and family histories. Our software and respective database is hosted in the School of Public Health server and is based on free programming languages. An e-NutriHS prototype was created preceding online deployment. An improved version of the website was released based on 20 volunteers' opinions. A total of 503 users were registered. Considering that web-based systems produce reliable data, are easy to use, less costly and are less time-consuming, we conclude that our experience deserves to be shared, particularly with middle income economy countries.

  10. Assemblages of Southeast-South Brazilian Coastal Systems Based on the Distribution of Fishes

    Science.gov (United States)

    Araújo, F. G.; Costa de Azevedo, M. C.

    2001-06-01

    Multivariate principal components analysis and cluster analysis were performed on data representing presence or absence of 498 species of juvenile and adult fish species in twenty-four coastal marine systems (bays, coastal lagoons, estuaries and coastal zones) distributed from southeast to southern Brazil. Five groups of coastal systems were identified based on fish assemblage similarity: estuaries and bays of the southeast area; an estuary of the southern area; coastal lagoons; rocky coastal zones; and the continental platform. Species assemblages for each zone were identified and used as surrogate habitat indicators to compare and contrast the groups. Stepwise multiple regression of environmental and physical variables as predictors of the number of species indicated that only ' area ' was included in the model as the most important variable explaining the variation of the number of species in these data sets. The total number of fish species increased as surface area increased.

  11. Real-time transient stability emergency control of the South-Southeast Brazilian system

    OpenAIRE

    Ernst, Damien; Bettiol, Arlan; Zhang, YiWei; Wehenkel, Louis; Pavella, Mania

    1998-01-01

    A method is proposed for during transients emergency control which predicts the evolution of a system undergoing a major disturbance and, if loss of synchronism is anticipated decides control actions able to contain it. The method emanates from SIME, a hybrid time-domain direct method originally designed for realtime preventive transient stability assessment and control. The devised “emergency SIME” has similar interesting features, namely, robustness, accuracy, speed - and also predictive c...

  12. Characteristics of physical activity programs in the Brazilian primary health care system

    OpenAIRE

    Grace Angélica de Oliveira Gomes; Eduardo Kokubun; Grégore Iven Mieke; Luiz Roberto Ramos; Michael Pratt; Diana C. Parra; Eduardo Simões; Florindo, Alex A; Mario Bracco; Danielle Cruz; Deborah Malta; Felipe Lobelo; Hallal, Pedro C.

    2014-01-01

    The aim of this study was to describe the characteristics of programs that promote physical activity in the public primary care system by region of Brazil, subject to the presence or absence of multidisciplinary primary care teams (NASF). We conducted a cross sectional and population-based telephone survey of the health unit coordinators from 1,251 health care units. Coordinators were asked about the presence and characteristics of physical activity programs. Four out of ten health units repo...

  13. Brazilian National System for the Monitoring and Improvement of Compounding Practices: program outcomes.

    Science.gov (United States)

    de Souza, Hugo Guedes; Favaro, Alvaro; Andrade, Alba Lívia; Gomes, Lenir Yago; Garcez, Maria do Carmo

    2012-01-01

    Compounding pharmacies in Brazil have to comply with a complex and strict set of drug manufacturing regulations. The authors reported in the International Journal of Pharmaceutical Compounding (November/December 2009, Volume 13, Issue 6) on the development and implementation of a National System for the Monitoring and Improvement of Compounding Practices in Brazil, a process-focused program aiming to help compounding pharmacies improve drug manufacturing processes and meet the standards set forth by the applicable legislation This article reports the results obtained in the first three editions of the National System for the Monitoring and Improvement of Compounding Practices in Brazil (2006-2010) and presents new foci explored in the 2011 cycle. The results obtained over the years demonstrate that participating in the National System for the Monitoring and Improvement of Compounding Practices in Brazil has helped pharmacies achieve legal compliance and improve the quality of their preparations, which has contributed substantially to meeting quality standards never before achieved in the compounding sector in Brazil.

  14. Brazilian National System for the Monitoring and Improvement of Compounding Practices: program outcomes.

    Science.gov (United States)

    de Souza, Hugo Guedes; Favaro, Alvaro; Andrade, Alba Lívia; Gomes, Lenir Yago; Garcez, Maria do Carmo

    2012-01-01

    Compounding pharmacies in Brazil have to comply with a complex and strict set of drug manufacturing regulations. The authors reported in the International Journal of Pharmaceutical Compounding (November/December 2009, Volume 13, Issue 6) on the development and implementation of a National System for the Monitoring and Improvement of Compounding Practices in Brazil, a process-focused program aiming to help compounding pharmacies improve drug manufacturing processes and meet the standards set forth by the applicable legislation This article reports the results obtained in the first three editions of the National System for the Monitoring and Improvement of Compounding Practices in Brazil (2006-2010) and presents new foci explored in the 2011 cycle. The results obtained over the years demonstrate that participating in the National System for the Monitoring and Improvement of Compounding Practices in Brazil has helped pharmacies achieve legal compliance and improve the quality of their preparations, which has contributed substantially to meeting quality standards never before achieved in the compounding sector in Brazil. PMID:23050320

  15. Advanced electric propulsion system concept for electric vehicles. Addendum 1: Voltage considerations

    Science.gov (United States)

    Raynard, A. E.; Forbes, F. E.

    1980-01-01

    The two electric vehicle propulsion systems that best met cost and performance goals were examined to assess the effect of battery pack voltage on system performance and cost. A voltage range of 54 to 540 V was considered for a typical battery pack capacity of 24 k W-hr. The highest battery specific energy (W-hr/kg) and the lowest cost ($/kW-hr) were obtained at the minimum voltage level. The flywheel system traction motor is a dc, mechanically commutated with shunt field control, and due to the flywheel the traction motor and the battery are not subject to extreme peaks of power demand. The basic system uses a permanent-magnet motor with electronic commutation supplied by an ac power control unit. In both systems battery cost were the major factor in system voltage selection, and a battery pack with the minimum voltage of 54 V produced the lowest life-cycle cost. The minimum life-cycle cost for the basic system with lead-acid batteries was $0.057/km and for the flywheel system was $0.037/km.

  16. Asymmetry-induced electric current rectification in permselective systems.

    Science.gov (United States)

    Green, Yoav; Edri, Yaron; Yossifon, Gilad

    2015-09-01

    For a symmetric ion permselective system, in terms of geometry and bulk concentrations, the system response is also symmetric under opposite electric field polarity. In this work we derive an analytical solution for the concentration distribution, electric potential, and current-voltage response for a four-layered system comprised of two microchambers connected by two permselective regions of varying properties. It is shown that any additional asymmetry in the system, in terms of the geometry, bulk concentration, or surface charge property of the permselective regions, results in current rectification. Our work is divided into two parts: when both permselective regions have the same surface charge sign and the case of opposite signs. For the same sign case we are able to show that the system behaves as a dialytic battery while accounting for field-focusing effects. For the case of opposite signs (i.e., bipolar membrane), our system exhibits the behavior of a bipolar diode where the magnitude of the rectification can be of order 10^{2}-10^{3}.

  17. ATLAS magnet common cryogenic, vacuum, electrical and control systems

    CERN Document Server

    Miele, P; Delruelle, N; Geich-Gimbel, C; Haug, F; Olesen, G; Pengo, R; Sbrissa, E; Tyrvainen, H; ten Kate, H H J

    2004-01-01

    The superconducting Magnet System for the ATLAS detector at the LHC at CERN comprises a Barrel Toroid, two End Cap Toroids and a Central Solenoid with overall dimensions of 20 m diameter by 26 m length and a stored energy of 1.6 GJ. Common proximity cryogenic and electrical systems for the toroids are implemented. The Cryogenic System provides the cooling power for the 3 toroid magnets considered as a single cold mass (600 tons) and for the CS. The 21 kA toroid and the 8 kA solenoid electrical circuits comprise both a switch-mode power supply, two circuit breakers, water cooled bus bars, He cooled current leads and the diode resistor ramp-down unit. The Vacuum System consists of a group of primary rotary pumps and sets of high vacuum diffusion pumps connected to each individual cryostat. The Magnet Safety System guarantees the magnet protection and human safety through slow and fast dump treatment. The Magnet Control System ensures control, regulation and monitoring of the operation of the magnets. The update...

  18. Automotive Electrical and Electronic System II; Automotive Mechanics-Intermediate: 9045.04.

    Science.gov (United States)

    Dade County Public Schools, Miami, FL.

    This automotive electrical and electronic system course is an intermediate course designed for the student who has completed automotive Electrical and Electronic System I. The theory and principles of operation of the components of the starting and charging systems and other electrical accessory systems in the automobile will be learned by the…

  19. Composite-system-stability-methods applied to advanced shipboard electric-power systems. Doctoral thesis

    Energy Technology Data Exchange (ETDEWEB)

    Amy, J.V.

    1992-05-01

    Large increases in the complexity of shipboard electric loads as well as development of electric drive, integrated electric drive and pulsed power systems make manifest the present and future importance of naval electric power systems. The most crucial attribute of these systems is their ability to fulfill their function in the presence of large-signal perturbations. Fundamental differences between shipboard and commercial electric power systems make all but the most general nonlinear, large-signal stability analyses inappropriate for the design and assessment of naval electric power systems. The tightly coupled and compact nature of shipboard systems are best accommodated by composite system stability analyses. Composite system methods, based upon Lyapunov's direct method, require that each component's stability be represented by a Lyapunov function. A new Lyapunov function which is based upon co-energy is developed for 3-phase synchronous machines. This use of co-energy is generalizable to all electromechanical energy conversion devices. The co-energy-based Lyapunov function is implemented as a stability organ which generates waveforms at information terminals of a device object in the object oriented simulation environment of WAVESIM. Single generator simulation results are used to acquire a measure of the over sufficiency of the co-energy-based Lyapunov function.

  20. Challenges for implementation of bioenergy in the Brazilian energy matrix and biomass gasification process for the production of electrical power; Desafios da bioenergia para sua implementacao na matriz energetica brasileira e o processo de gaseificacao da biomassa para a producao de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Figueiroa, E.O.; Moutinho-Junior, D.A.A.; Silva, J.D. [Universidade de Pernambuco (UPE), Recife, PE (Brazil)

    2010-07-01

    The gasification is the conversion of any solid or liquid fuel in fuel gas through the process of the partial oxidation at a high temperature. The gasification process of course occurs in four distinct physicochemical stages with different temperatures of reaction, as drying of the biomass, pyrolysis, reduction and combustion. The reorganization of the Brazilian electric sector foresees technological innovations in the system of electric generation for the country. The process of gasification integrated in a combined cycle (cycle of Brayton and cycle of Rankine) characterizes an innovative technology. It is with noting that this technology is still in improvement, it shows an excellent perspective of commercial viability and efficiency significantly higher than conventional technology. This work presents a study of the gases generated in the zone of combustion and its behavior in the zone of 'freeboard' of a gasifier of fluidized stream bed. For this study, we made the use of one hybrid technique (half-analytical) that is the transformed one of Fourier. (author)