WorldWideScience

Sample records for brasiliano decompression melting

  1. A metastable liquid melted from a crystalline solid under decompression

    Science.gov (United States)

    Lin, Chuanlong; Smith, Jesse S.; Sinogeikin, Stanislav V.; Kono, Yoshio; Park, Changyong; Kenney-Benson, Curtis; Shen, Guoyin

    2017-01-01

    A metastable liquid may exist under supercooling, sustaining the liquid below the melting point such as supercooled water and silicon. It may also exist as a transient state in solid-solid transitions, as demonstrated in recent studies of colloidal particles and glass-forming metallic systems. One important question is whether a crystalline solid may directly melt into a sustainable metastable liquid. By thermal heating, a crystalline solid will always melt into a liquid above the melting point. Here we report that a high-pressure crystalline phase of bismuth can melt into a metastable liquid below the melting line through a decompression process. The decompression-induced metastable liquid can be maintained for hours in static conditions, and transform to crystalline phases when external perturbations, such as heating and cooling, are applied. It occurs in the pressure-temperature region similar to where the supercooled liquid Bi is observed. Akin to supercooled liquid, the pressure-induced metastable liquid may be more ubiquitous than we thought.

  2. Dynamics of upper mantle rocks decompression melting above hot spots under continental plates

    Science.gov (United States)

    Perepechko, Yury; Sorokin, Konstantin; Sharapov, Victor

    2014-05-01

    Numeric 2D simulation of the decompression melting above the hot spots (HS) was accomplished under the following conditions: initial temperature within crust mantle section was postulated; thickness of the metasomatized lithospheric mantle is determined by the mantle rheology and position of upper asthenosphere boundary; upper and lower boundaries were postulated to be not permeable and the condition for adhesion and the distribution of temperature (1400-2050°C); lateral boundaries imitated infinity of layer. Sizes and distribution of lateral points, their symmetry, and maximum temperature varied between the thermodynamic condition for existences of perovskite - majorite transition and its excess above transition temperature. Problem was solved numerically a cell-vertex finite volume method for thermo hydrodynamic problems. For increasing convergence of iterative process the method of lower relaxation with different value of relaxation parameter for each equation was used. The method of through calculation was used for the increase in the computing rate for the two-layered upper mantle - lithosphere system. Calculated region was selected as 700 x (2100-4900) km. The time step for the study of the asthenosphere dynamics composed 0.15-0.65 Ma. The following factors controlling the sizes and melting degree of the convective upper mantle, are shown: a) the initial temperature distribution along the section of upper mantleb) sizes and the symmetry of HS, c) temperature excess within the HS above the temperature on the upper and lower mantle border TB=1500-2000oC with 5-15% deviation but not exceed 2350oC. It is found, that appearance of decompression melting with HS presence initiate primitive mantle melting at TB > of 1600oC. Initial upper mantle heating influence on asthenolens dimensions with a constant HS size is controlled mainly by decompression melting degree. Thus, with lateral sizes of HS = 400 km the decompression melting appears at TB > 1600oC and HS

  3. Magma decompression rates during explosive eruptions of Kīlauea volcano, Hawaii, recorded by melt embayments

    Science.gov (United States)

    Ferguson, David J.; Gonnermann, Helge M.; Ruprecht, Philipp; Plank, Terry; Hauri, Erik H.; Houghton, Bruce F.; Swanson, Donald A.

    2016-01-01

    The decompression rate of magma as it ascends during volcanic eruptions is an important but poorly constrained parameter that controls many of the processes that influence eruptive behavior. In this study, we quantify decompression rates for basaltic magmas using volatile diffusion in olivine-hosted melt tubes (embayments) for three contrasting eruptions of Kīlauea volcano, Hawaii. Incomplete exsolution of H2O, CO2, and S from the embayment melts during eruptive ascent creates diffusion profiles that can be measured using microanalytical techniques, and then modeled to infer the average decompression rate. We obtain average rates of ~0.05–0.45 MPa s−1 for eruptions ranging from Hawaiian style fountains to basaltic subplinian, with the more intense eruptions having higher rates. The ascent timescales for these magmas vary from around ~5 to ~36 min from depths of ~2 to ~4 km, respectively. Decompression-exsolution models based on the embayment data also allow for an estimate of the mass fraction of pre-existing exsolved volatiles within the magma body. In the eruptions studied, this varies from 0.1 to 3.2 wt% but does not appear to be the key control on eruptive intensity. Our results do not support a direct link between the concentration of pre-eruptive volatiles and eruptive intensity; rather, they suggest that for these eruptions, decompression rates are proportional to independent estimates of mass discharge rate. Although the intensity of eruptions is defined by the discharge rate, based on the currently available dataset of embayment analyses, it does not appear to scale linearly with average decompression rate. This study demonstrates the utility of the embayment method for providing quantitative constraints on magma ascent during explosive basaltic eruptions.

  4. Magma decompression rates during explosive eruptions of Kīlauea volcano, Hawaii, recorded by melt embayments

    Science.gov (United States)

    Ferguson, David J.; Gonnermann, Helge M.; Ruprecht, Philipp; Plank, Terry; Hauri, Erik H.; Houghton, Bruce F.; Swanson, Donald A.

    2016-10-01

    The decompression rate of magma as it ascends during volcanic eruptions is an important but poorly constrained parameter that controls many of the processes that influence eruptive behavior. In this study, we quantify decompression rates for basaltic magmas using volatile diffusion in olivine-hosted melt tubes (embayments) for three contrasting eruptions of Kīlauea volcano, Hawaii. Incomplete exsolution of H2O, CO2, and S from the embayment melts during eruptive ascent creates diffusion profiles that can be measured using microanalytical techniques, and then modeled to infer the average decompression rate. We obtain average rates of ~0.05-0.45 MPa s-1 for eruptions ranging from Hawaiian style fountains to basaltic subplinian, with the more intense eruptions having higher rates. The ascent timescales for these magmas vary from around ~5 to ~36 min from depths of ~2 to ~4 km, respectively. Decompression-exsolution models based on the embayment data also allow for an estimate of the mass fraction of pre-existing exsolved volatiles within the magma body. In the eruptions studied, this varies from 0.1 to 3.2 wt% but does not appear to be the key control on eruptive intensity. Our results do not support a direct link between the concentration of pre-eruptive volatiles and eruptive intensity; rather, they suggest that for these eruptions, decompression rates are proportional to independent estimates of mass discharge rate. Although the intensity of eruptions is defined by the discharge rate, based on the currently available dataset of embayment analyses, it does not appear to scale linearly with average decompression rate. This study demonstrates the utility of the embayment method for providing quantitative constraints on magma ascent during explosive basaltic eruptions.

  5. Contamination of mantle magmas by crustal contributions: evidence from the brasiliano mobile belt in the State of Espirito Santo, Brazil

    International Nuclear Information System (INIS)

    Wiedemann, Cristina M.; mendes, Julio C.; Ludka, Isabel P.

    1995-01-01

    In the beginning of the late orogenic phase of the Pan african/Brasiliano Mobile Belt, in Espirito Santo and Rio de Janeiro States, along the Brazilian coast, tholeiitic gabbros intruded the coast Small bodies of clinopyroxene -gabbro-norites, hornblendi-gabbros and clinoorthopyroxenes -pyroxenites/hornblendites typical tholeiitic AFM-trends. The series of rocks reveal evidence of crustal contamination, but no signs of in situ mixing with granitic melts. The geochemical characteristics of the tholeiitic series and suites of magmatites,- present in the different evolutionary stages of the post-collisional magmatic arc, in the Brasiliano Coastal Mobile belt, in the States of Espirito Santo and Rio de Janeiro-, are regarded as an important tool for the recognition of a further contamination process of an already enriched mantle, at crustal levels, during Late Proterozoic/Early Paleozoic times. 33 refs., 11 figs., 2 tabs

  6. The Brasiliano collage in South America: a review

    Directory of Open Access Journals (Sweden)

    Benjamim Bley de Brito Neves

    Full Text Available Analysis of recent geological and geochronological data from the basement of the South American platform indicates that the Brasiliano orogenic collage took place in four distinct pulses: a Early Cryogenian (ca. 800 - 740Ma; b Late Cryogenian-Early Ediacaran (ca. 660 - 610 Ma; c Early-Middle Ediacaran (c. 590 - 560 Ma; and d Late Cambrian (520 - 500 Ma. The first three pulses are well represented in most Neoproterozoic structural provinces in West Gondwana. The youngest orogenic phase/pulse, however, is only seen in Argentina (Pampean Orogeny and Brazil, in eastern Rio de Janeiro State (Búzios Orogeny. The period between ca. 750 and 500 Ma is comparable to that reported for the amalgamation of various continental fragments in East (Arabian-Nubian, Mozambique, Kuunga and North Gondwana (Cadomian. However, important differences in the nature and ages of events are recognized, which can be expected in view of the magnitude of Gondwana agglutination and the diversity of paleogeographic and tectonic scenarios. West Gondwana shows an interesting peculiarity: lithologically and tectonically diversified Tonian terranes underlie Brasiliano orogenic buildups. They were strongly reworked during most of the orogenic pulses. The Tonian terranes (1000 - 900 Ma and their relation with Rodinia or with the processes of Gondwana fusion remains an open question. Indications of their presence in East Gondwana are still poorly documented.

  7. Eruptive dynamics during magma decompression: a laboratory approach

    Science.gov (United States)

    Spina, L.; Cimarelli, C.; Scheu, B.; Wadsworth, F.; Dingwell, D. B.

    2013-12-01

    A variety of eruptive styles characterizes the activity of a given volcano. Indeed, eruptive styles can range from effusive phenomena to explosive eruptions, with related implications for hazard management. Rapid changes in eruptive style can occur during an ongoing eruption. These changes are, amongst other, related to variations in the magma ascent rate, a key parameter affecting the eruptive style. Ascent rate is in turn dependent on several factors such as the pressure in the magma chamber, the physical properties of the magma and the rate at which these properties change. According to the high number of involved parameters, laboratory decompression experiments are the best way to achieve quantitative information on the interplay of each of those factors and the related impact on the eruption style, i.e. by analyzing the flow and deformation behavior of the transparent volatile-bearing analogue fluid. We carried out decompression experiments following different decompression paths and using silicone oil as an analogue for the melt, with which we can simulate a range of melt viscosity values. For a set of experiments we added rigid particles to simulate the presence of crystals in the magma. The pure liquid or suspension was mounted into a transparent autoclave and pressurized to different final pressures. Then the sample was saturated with argon for a fixed amount of time. The decompression path consists of a slow decompression from the initial pressure to the atmospheric condition. Alternatively, samples were decompressed almost instantaneously, after established steps of slow decompression. The decompression path was monitored with pressure transducers and a high-speed video camera. Image analysis of the videos gives quantitative information on the bubble distribution with respect to depth in the liquid, pressure and time of nucleation and on their characteristics and behavior during the ongoing magma ascent. Furthermore, we also monitored the evolution of

  8. Decompression-induced melting of ice IV and the liquid-liquid transition in water

    Science.gov (United States)

    Mishima, Osamu; Stanley, H. Eugene

    1998-03-01

    Although liquid water has been the focus of intensive research for over 100 years, a coherent physical picture that unifies all of the known anomalies of this liquid, is still lacking. Some of these anomalies occur in the supercooled region, and have been rationalized on the grounds of a possible retracing of the liquid-gas spinodal (metastability limit) line into the supercooled liquid region, or alternatively the presence of a line of first-order liquid-liquid phase transitions in this region which ends in a critical point,. But these ideas remain untested experimentally, in part because supercooled water can be probed only above the homogeneous nucleation temperature TH at which water spontaneously crystallizes. Here we report an experimental approach that is not restricted by the barrier imposed by TH, involving measurement of the decompression-induced melting curves of several high-pressure phases of ice in small emulsified droplets. We find that the melting curve for ice IV seems to undergo a discontinuity at precisely the location proposed for the line of liquid-liquid phase transitions. This is consistent with, but does not prove, the coexistence of two different phases of (supercooled) liquid water. From the experimental data we calculate a possible Gibbs potential surface and a corresponding equation of state for water, from the forms of which we estimate the coordinates of the liquid-liquid critical point to be at pressure Pc ~ 0.1GPa and temperature Tc ~ 220K.

  9. Sulfur isotope fractionation between fluid and andesitic melt: An experimental study

    Science.gov (United States)

    Fiege, Adrian; Holtz, François; Shimizu, Nobumichi; Mandeville, Charles W.; Behrens, Harald; Knipping, Jaayke L.

    2014-01-01

    Glasses produced from decompression experiments conducted by Fiege et al. (2014a) were used to investigate the fractionation of sulfur isotopes between fluid and andesitic melt upon magma degassing. Starting materials were synthetic glasses with a composition close to a Krakatau dacitic andesite. The glasses contained 4.55–7.95 wt% H2O, ∼140 to 2700 ppm sulfur (S), and 0–1000 ppm chlorine (Cl). The experiments were carried out in internally heated pressure vessels (IHPV) at 1030 °C and oxygen fugacities (fO2) ranging from QFM+0.8 log units up to QFM+4.2 log units (QFM: quartz–fayalite–magnetite buffer). The decompression experiments were conducted by releasing pressure (P) continuously from ∼400 MPa to final P of 150, 100, 70 and 30 MPa. The decompression rate (r) ranged from 0.01 to 0.17 MPa/s. The samples were annealed for 0–72 h (annealing time, tA) at the final P and quenched rapidly from 1030 °C to room temperature (T).The decompression led to the formation of a S-bearing aqueous fluid phase due to the relatively large fluid–melt partitioning coefficients of S. Secondary ion mass spectrometry (SIMS) was used to determine the isotopic composition of the glasses before and after decompression. Mass balance calculations were applied to estimate the gas–melt S isotope fractionation factor αg-m.No detectable effect of r and tA on αg-m was observed. However, SIMS data revealed a remarkable increase of αg-m from ∼0.9985 ± 0.0007 at >QFM+3 to ∼1.0042 ± 0.0042 at ∼QFM+1. Noteworthy, the isotopic fractionation at reducing conditions was about an order of magnitude larger than predicted by previous works. Based on our experimental results and on previous findings for S speciation in fluid and silicate melt a new model predicting the effect of fO2 on αg-m (or Δ34Sg–m) in andesitic systems at 1030 °C is proposed. Our experimental results as well as our modeling are of high importance for the interpretation of S isotope

  10. Southern Brasilia Belt (SE Brazil): tectonic discontinuities, K-Ar data and evolution during the Neoproterozoic Brasiliano orogeny

    International Nuclear Information System (INIS)

    Valeriano, Claudio Morrison de; Teixeira, Wilson; Simoes, Luiz Sergio Amarante; Heilbron, Monica

    2000-01-01

    This paper focuses the tectonic evolution of the southern brasilia belt, with emphasis on the Furnas segment, along the 21 deg C S parallel. The uppermost structural unit (Passos Nappe - PN) comprises a highly deformed metasedimentary succession interpreted as a fragment of the Neoproterozoic passive margin of western Sao francisco craton. An inverted metamorphic gradient ranging from greensvhits to lower granulite facies of medium to high-pressure regime characterizes the PN as relict of a subduction zone. The External Domain display a complex imbrication of basement rocks (Archean Piumhi greenstones, a turbiditic gaywacke succession and a calc-alkaline granitoid suite) with undated siliciclast low-grade metasedimentary rocks. The Sao Francisco Craton (SFC) comprises pre-1.8 Ga basement rocks covered by anchimetamorphic Neoproterozoic carbonatic shallow marine platform deposits of the Bambui group. The Brasiliano thrust stacking generated a coarse clastic influx of molassic character on the foreland zone of Sao Francisco Craton, coeval with the exhumation of the External Domain thrust sheets. New K-Ar determinations on mineral separates are presented an interpreted among previous data. The SFC basement rocks display Paleo-to Meesoproterozoic cooling ages. The allochthonous units, in contrast, display K-Ar ages within the 560-675 Ma range. Brasiliano thrust stacking is therefore interpreted to have taken place onto a cold Sao Francisco craton foreland, in a thin-skinned style, as basement rocks were not heated enough to have their-K-ar systems reset during the allochthony. (author)

  11. Magmas with slab fluid and decompression melting signatures coexisting in the Gulf of Fonseca: Evidence from Isla El Tigre volcano (Honduras, Central America)

    Science.gov (United States)

    Mattioli, Michele; Renzulli, Alberto; Agostini, Samuele; Lucidi, Roberto

    2016-01-01

    Isla El Tigre volcano is located in the Gulf of Fonseca (Honduras) along the Central America volcanic front, where a significant change in the strike of the volcanic chain is observed. The studied samples of this poorly investigated volcano are mainly subalkaline basic to intermediate lavas (basalts and basaltic andesites) and subordinate subalkaline/alkaline transitional basalts, both having the typical mineralogical and geochemical characteristics of arc volcanic rocks. On the basis of petrographic and geochemical features, two groups of rocks have been distinguished. Lavas from the main volcanic edifice are highly porphyritic and hy-qz normative, and have lower MgO contents ( 5 wt.%), are ol-hy normative and show lower HFSE depletions relative to LILE and LREE, with lower Ba/La, Ba/Nb and Zr/Nb ratios. This suggests that mantle-derived magmas were not produced by the same process throughout the activity of the volcano. The bulk rock geochemistry and 87Sr/86Sr (0.70373-0.70382), 143Nd/144Nd (0.51298-0.51301), 206Pb/204Pb (18.55-18.58), 207Pb/204Pb (15.54-15.56) and 208Pb/204Pb (38.23-38.26) isotopic data of Isla El Tigre compared with the other volcanoes of the Gulf of Fonseca and all available literature data for Central America suggests that this stratovolcano was mainly built by mantle-derived melts driven by slab-derived fluid-flux melting, while magmas erupted through its parasitic cones have a clear signature of decompression melting with minor slab contribution. The coexistence of these two different mantle melting generation processes is likely related to the complex geodynamic setting of the Gulf of Fonseca, where the volcanic front changes direction by ca. 30° and two fundamental tectonic structures of the Chortis continental block, mainly the N-S Honduras Depression and the NE-SW Guayape Fault Zone, cross each other.

  12. Decompression illness - critical review

    Directory of Open Access Journals (Sweden)

    C S Mohanty

    2015-01-01

    Full Text Available Decompression illness is caused by intravascular or extravascular bubbles that are formed as a result of reduction in environmental pressure (decompression. The term covers both arterial gas embolism, in which alveolar gas or venous gas emboli (via cardiac shunts or via pulmonary vessels are introduced into the arterial circulation, and decompression sickness, which is caused by in-situ bubble formation from dissolved inert gas. Both syndromes can occur in divers, compressed air workers, aviators, and astronauts, but arterial gas embolism also arises from iatrogenic causes unrelated to decompression. Risk of decompression illness is affected by immersion, exercise, and heat or cold. Manifestations range from itching and minor pain to neurological symptoms, cardiac collapse, and death. First-aid treatment is 1 0 0 % oxygen and definitive treatment is recompression to increased pressure, breathing 1 0 0 % oxygen. Adjunctive treatment, including fluid administration and prophylaxis against venous thromboembolism in paralysed patients, is also recommended Treatment is, in most cases, effective although residual deficits can remain in serious cases, even after several recompressions.

  13. Rapakivi texture formation via disequilibrium melting in a contact partial melt zone, Antarctica

    Science.gov (United States)

    Currier, R. M.

    2017-12-01

    In the McMurdo Dry Valleys of Antarctica, a Jurassic aged dolerite sill induced partial melting of granite in the shallow crust. The melt zone can be traced in full, from high degrees of melting (>60%) along the dolerite contact, to no apparent signs of melting, 10s of meters above the contact. Within this melt zone, the well-known rapakivi texture is found, arrested in various stages of development. High above the contact, and at low degrees of melting, K-feldspar crystals are slightly rounded and unmantled. In the lower half of the melt zone, mantles of cellular textured plagioclase appear on K-feldspar, and thicken towards the contact heat source. At the highest degrees of melting, cellular-textured plagioclase completely replaces restitic K-feldspar. Because of the complete exposure and intact context, the leading models of rapakivi texture formation can be tested against this system. The previously proposed mechanisms of subisothermal decompression, magma-mixing, and hydrothermal exsolution all fail to adequately describe rapakivi generation in this melt zone. Preferred here is a closed system model that invokes the production of a heterogeneous, disequilibrium melt through rapid heating, followed by calcium and sodium rich melt reacting in a peritectic fashion with restitic K-feldspar crystals. This peritectic reaction results in the production of plagioclase of andesine-oligoclase composition—which is consistent with not just mantles in the melt zone, but globally as well. The thickness of the mantle is diffusion limited, and thus a measure of the diffusive length scale of sodium and calcium over the time scale of melting. Thermal modeling provides a time scale of melting that is consistent with the thickness of observed mantles. Lastly, the distribution of mantled feldspars is highly ordered in this melt zone, but if it were mobilized and homogenized—mixing together cellular plagioclase, mantled feldspars, and unmantled feldspars—the result would be

  14. Comparative incidences of decompression illness in repetitive, staged, mixed-gas decompression diving: is 'dive fitness' an influencing factor?

    Science.gov (United States)

    Sayer, Martin Dj; Akroyd, Jim; Williams, Guy D

    2008-06-01

    Wreck diving at Bikini Atoll consists of a relatively standard series of decompression dives with maximum depths in the region of 45-55 metres' sea water (msw). In a typical week of diving at Bikini, divers can perform up to 12 decompression dives to these depths over seven days; on five of those days, divers can perform two decompression dives per day. All the dives employ multi-level, staged decompression schedules using air and surface-supplied nitrox containing 80% oxygen. Bikini is serviced by a single diving operator and so a relatively precise record exists both of the actual number of dives undertaken and of the decompression illness incidents both for customer divers and the dive guides. The dive guides follow exactly the dive profiles and decompression schedules of the customers. Each dive guide will perform nearly 400 decompression dives a year, with maximum depths mostly around 50 msw, compared with an average of 10 (maximum of 12) undertaken typically by each customer diver in a week. The incidence of decompression illness for the customer population (presumed in the absence of medical records) is over ten times higher than that for the dive guides. The physiological reasons for such a marked difference are discussed in terms of customer demographics and dive-guide acclimatization to repetitive decompression stress. The rates of decompression illness for a range of diving populations are reviewed.

  15. NanoSIMS results from olivine-hosted melt embayments: Magma ascent rate during explosive basaltic eruptions

    Science.gov (United States)

    Lloyd, Alexander S.; Ruprecht, Philipp; Hauri, Erik H.; Rose, William; Gonnermann, Helge M.; Plank, Terry

    2014-08-01

    The explosivity of volcanic eruptions is governed in part by the rate at which magma ascends and degasses. Because the time scales of eruptive processes can be exceptionally fast relative to standard geochronometers, magma ascent rate remains difficult to quantify. Here we use as a chronometer concentration gradients of volatile species along open melt embayments within olivine crystals. Continuous degassing of the external melt during magma ascent results in diffusion of volatile species from embayment interiors to the bubble located at their outlets. The novel aspect of this study is the measurement of concentration gradients in five volatile elements (CO2, H2O, S, Cl, F) at fine-scale (5-10 μm) using the NanoSIMS. The wide range in diffusivity and solubility of these different volatiles provides multiple constraints on ascent timescales over a range of depths. We focus on four 100-200 μm, olivine-hosted embayments erupted on October 17, 1974 during the sub-Plinian eruption of Volcán de Fuego. H2O, CO2, and S all decrease toward the embayment outlet bubble, while F and Cl increase or remain roughly constant. Compared to an extensive melt inclusion suite from the same day of the eruption, the embayments have lost both H2O and CO2 throughout the entire length of the embayment. We fit the profiles with a 1-D numerical diffusion model that allows varying diffusivities and external melt concentrations as a function of pressure. Assuming a constant decompression rate from the magma storage region at approximately 220 MPa to the surface, H2O, CO2 and S profiles for all embayments can be fit with a relatively narrow range in decompression rates of 0.3-0.5 MPa/s, equivalent to 11-17 m/s ascent velocity and an 8 to 12 minute duration of magma ascent from ~ 10 km depth. A two stage decompression model takes advantage of the different depth ranges over which CO2 and H2O degas, and produces good fits given an initial stage of slow decompression (0.05-0.3 MPa/s) at high

  16. Cardiopulmonary Changes with Moderate Decompression in Rats

    Science.gov (United States)

    Robinson, R.; Little, T.; Doursout, M.-F.; Butler, B. D.; Chelly, J. E.

    1996-01-01

    Sprague-Dawley rats were compressed to 616 kPa for 120 min then decompressed at 38 kPa/min to assess the cardiovascular and pulmonary responses to moderate decompression stress. In one series of experiments the rats were chronically instrumented with Doppler ultrasonic probes for simultaneous measurement of blood pressure, cardiac output, heart rate, left and right ventricular wall thickening fraction, and venous bubble detection. Data were collected at base-line, throughout the compression/decompression protocol, and for 120 min post decompression. In a second series of experiments the pulmonary responses to the decompression protocol were evaluated in non-instrumented rats. Analyses included blood gases, pleural and bronchoalveolar lavage (BAL) protein and hemoglobin concentration, pulmonary edema, BAL and lung tissue phospholipids, lung compliance, and cell counts. Venous bubbles were directly observed in 90% of the rats where immediate post-decompression autopsy was performed and in 37% using implanted Doppler monitors. Cardiac output, stroke volume, and right ventricular wall thickening fractions were significantly decreased post decompression, whereas systemic vascular resistance was increased suggesting a decrease in venous return. BAL Hb and total protein levels were increased 0 and 60 min post decompression, pleural and plasma levels were unchanged. BAL white blood cells and neutrophil percentages were increased 0 and 60 min post decompression and pulmonary edema was detected. Venous bubbles produced with moderate decompression profiles give detectable cardiovascular and pulmonary responses in the rat.

  17. Needle Decompression of Tension Pneumothorax with Colorimetric Capnography.

    Science.gov (United States)

    Naik, Nimesh D; Hernandez, Matthew C; Anderson, Jeff R; Ross, Erika K; Zielinski, Martin D; Aho, Johnathon M

    2017-11-01

    The success of needle decompression for tension pneumothorax is variable, and there are no objective measures assessing effective decompression. Colorimetric capnography, which detects carbon dioxide present within the pleural space, may serve as a simple test to assess effective needle decompression. Three swine underwent traumatically induced tension pneumothorax (standard of care, n = 15; standard of care with needle capnography, n = 15). Needle thoracostomy was performed with an 8-cm angiocatheter. Similarly, decompression was performed with the addition of colorimetric capnography. Subjective operator assessment of decompression was recorded and compared with true decompression, using thoracoscopic visualization for both techniques. Areas under receiver operating curves were calculated and pairwise comparison was performed to assess statistical significance (P pneumothorax, that is, the absence of any pathologic/space-occupying lesion, in 100% of cases (10 of 10 attempts). Standard of care needle decompression was detected by operators in 9 of 15 attempts (60%) and was detected in 3 of 10 attempts when tension pneumothorax was not present (30%). True decompression, under direct visualization with thoracoscopy, occurred 15 of 15 times (100%) with capnography, and 12 of 15 times (80%) without capnography. Areas under receiver operating curves were 0.65 for standard of care and 1.0 for needle capnography (P = .002). Needle decompression with colorimetric capnography provides a rapid, effective, and highly accurate method for eliminating operator bias for tension pneumothorax decompression. This may be useful for the treatment of this life-threatening condition. Copyright © 2017 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

  18. Decompression Mechanisms and Decompression Schedule Calculations.

    Science.gov (United States)

    1984-01-20

    phisiology - The effects of altitude. Handbook of Physiology, Section 3: Respiration, Vol. II. W.O. Fenn and H. Rahn eds. Wash, D.C.; Am. Physiol. Soc. 1 4...decompression studies from other laboratories. METHODS Ten experienced and physically qualified divers ( ages 22-42) were compressed at a rate of 60...STATISTICS* --- ---------------------------------------------------------- EXPERIMENT N AGE (yr) HEIGHT (cm) WEIGHT (Kg) BODY FAT

  19. Tectonometamorphic evolution of Ghana, Togo and Benin in the light of the Pan-African/Brasiliano orogeny

    Science.gov (United States)

    Castaing, C.; Triboulet, C.; Feybesse, J. L.; Chèvremont, P.

    1993-02-01

    faulting and associated N-S post-foliation folding under late E-W shortening. Comparison between the West African, North Brasiliano and Central African Late Proterozoic belts shows very strong similarities between their lithology, kinematics and metamorphism, and indicates that the Pan-African/Brasiliano chain resulted from collision between three major continental domains: the West African and São-Francisco/Congo cratons and a Late Proterozoic mobile domain.

  20. Cardiovascular Pressures with Venous Gas Embolism and Decompression

    Science.gov (United States)

    Butler, B. D.; Robinson, R.; Sutton, T.; Kemper, G. B.

    1995-01-01

    Venous gas embolism (VGE) is reported with decompression to a decreased ambient pressure. With severe decompression, or in cases where an intracardiac septal defect (patent foramen ovale) exists, the venous bubbles can become arterialized and cause neurological decompression illness. Incidence rates of patent foramen ovale in the general population range from 25-34% and yet aviators, astronauts, and deepsea divers who have decompression-induced venous bubbles do not demonstrate neurological symptoms at these high rates. This apparent disparity may be attributable to the normal pressure gradient across the atria of the heart that must be reversed for there to be flow potency. We evaluated the effects of: venous gas embolism (0.025, 0.05 and 0.15 ml/ kg min for 180 min.) hyperbaric decompression; and hypobaric decompression on the pressure gradient across the left and right atria in anesthetized dogs with intact atrial septa. Left ventricular end-diastolic pressure was used as a measure of left atrial pressure. In a total of 92 experimental evaluations in 22 dogs, there were no reported reversals in the mean pressure gradient across the atria; a total of 3 transient reversals occurred during the peak pressure gradient changes. The reasons that decompression-induced venous bubbles do not consistently cause serious symptoms of decompression illness may be that the amount of venous gas does not always cause sufficient pressure reversal across a patent foramen ovale to cause arterialization of the venous bubbles.

  1. Complications of cranioplasty after decompressive craniectomy

    Directory of Open Access Journals (Sweden)

    Maša Glišović

    2015-04-01

    Full Text Available Cranioplasty is a surgical repair of a defect or deformity of a skull with the use of autologous bone or synthetic materials.[4] It usually follows decompressive craniectomy, which is a commonly practiced neurosurgical intervention in patients with raised intracranial pressure unresponsive to other forms of treatment.[1] There are many conditions that may lead to intracranial hypertension, and the goal is to avoid brain necrosis caused by compartment pressure syndrome.[2] Consequently, the extensive use of decompressive craniectomy directly results in more cranioplasties, which sometimes present with unwanted complications.[5] Generally, the occurence of cranioplasty complications is between 16% and 34%.[3] Because of the many indications for craniectomy based on clinical data that speak in its favour, if will probably remain a relatively common neurosurgical intervention also in the future. The frequency of decompressive craniectomy and consequently of cranioplasty requires awareness of the many potential postoperative complications and understanding of its evolution. This article is a review of pathophysiological mechanisms after decompressive craniectomy and cranioplasty, of its complications and factors that potentially contribute to their occurence.

  2. Delayed facial nerve decompression for Bell's palsy.

    Science.gov (United States)

    Kim, Sang Hoon; Jung, Junyang; Lee, Jong Ha; Byun, Jae Yong; Park, Moon Suh; Yeo, Seung Geun

    2016-07-01

    Incomplete recovery of facial motor function continues to be long-term sequelae in some patients with Bell's palsy. The purpose of this study was to investigate the efficacy of transmastoid facial nerve decompression after steroid and antiviral treatment in patients with late stage Bell's palsy. Twelve patients underwent surgical decompression for Bell's palsy 21-70 days after onset, whereas 22 patients were followed up after steroid and antiviral therapy without decompression. Surgical criteria included greater than 90 % degeneration on electroneuronography and no voluntary electromyography potentials. This study was a retrospective study of electrodiagnostic data and medical chart review between 2006 and 2013. Recovery from facial palsy was assessed using the House-Brackmann grading system. Final recovery rate did not differ significantly in the two groups; however, all patients in the decompression group recovered to at least House-Brackmann grade III at final follow-up. Although postoperative hearing threshold was increased in both groups, there was no significant between group difference in hearing threshold. Transmastoid decompression of the facial nerve in patients with severe late stage Bell's palsy at risk for a poor facial nerve outcome reduced severe complications of facial palsy with minimal morbidity.

  3. Effect of oxygen-breathing during a decompression-stop on bubble-induced platelet activation after an open-sea air dive: oxygen-stop decompression.

    Science.gov (United States)

    Pontier, J-M; Lambrechts, K

    2014-06-01

    We highlighted a relationship between decompression-induced bubble formation and platelet micro-particle (PMP) release after a scuba air-dive. It is known that decompression protocol using oxygen-stop accelerates the washout of nitrogen loaded in tissues. The aim was to study the effect of oxygen deco-stop on bubble formation and cell-derived MP release. Healthy experienced divers performed two scuba-air dives to 30 msw for 30 min, one with an air deco-stop and a second with 100% oxygen deco-stop at 3 msw for 9 min. Bubble grades were monitored with ultrasound and converted to the Kisman integrated severity score (KISS). Blood samples for cell-derived micro-particle analysis (AnnexinV for PMP and CD31 for endothelial MP) were taken 1 h before and after each dive. Mean KISS bubble score was significantly lower after the dive with oxygen-decompression stop, compared to the dive with air-decompression stop (4.3 ± 7.3 vs. 32.7 ± 19.9, p air-breathing decompression stop, we observed an increase of the post-dive mean values of PMP (753 ± 245 vs. 381 ± 191 ng/μl, p = 0.003) but no significant change in the oxygen-stop decompression dive (329 ± 215 vs. 381 +/191 ng/μl, p = 0.2). For the post-dive mean values of endothelial MP, there was no significant difference between both the dives. The Oxygen breathing during decompression has a beneficial effect on bubble formation accelerating the washout of nitrogen loaded in tissues. Secondary oxygen-decompression stop could reduce bubble-induced platelet activation and the pro-coagulant activity of PMP release preventing the thrombotic event in the pathogenesis of decompression sickness.

  4. [Orbital decompression in Grave's ophtalmopathy].

    Science.gov (United States)

    Longueville, E

    2010-01-01

    Graves disease orbitopathy is a complex progressive inflammatory disease. Medical treatment remains in all cases the proposed treatment of choice. Surgical treatment by bone decompression can be considered as an emergency mainly in cases of optic neuropathy or ocular hypertension not being controlled medically or in post-traumatic exophthalmos stage. Emergency bone decompression eliminates compression or stretching of the optic nerve allowing visual recovery. The uncontrolled ocular hypertension will benefit from decompression. The normalization of intraocular pressure may be obtained by this surgery or if needed by the use of postoperative antiglaucoma drops or even filtration surgery. In all operated cases, the IOP was normalized with an average decrease of 7.71 mmHg and a cessation of eye drops in 3/7 cases. Regarding sequelae, our therapeutic strategy involves consecutively surgery of the orbit, extraocular muscles and eyelids. The orbital expansion gives excellent results on the cosmetic level and facilitates the implementation of subsequent actions.

  5. Pictorial essay: Role of ultrasound in failed carpal tunnel decompression

    Directory of Open Access Journals (Sweden)

    Rajesh Botchu

    2012-01-01

    Full Text Available USG has been used for the diagnosis of carpal tunnel syndrome. Scarring and incomplete decompression are the main causes for persistence or recurrence of symptoms. We performed a retrospective study to assess the role of ultrasound in failed carpal tunnel decompression. Of 422 USG studies of the wrist performed at our center over the last 5 years, 14 were for failed carpal tunnel decompression. Scarring was noted in three patients, incomplete decompression in two patients, synovitis in one patient, and an anomalous muscle belly in one patient. No abnormality was detected in seven patients. We present a pictorial review of USG findings in failed carpal tunnel decompression.

  6. Pictorial essay: Role of ultrasound in failed carpal tunnel decompression.

    Science.gov (United States)

    Botchu, Rajesh; Khan, Aman; Jeyapalan, Kanagaratnam

    2012-01-01

    USG has been used for the diagnosis of carpal tunnel syndrome. Scarring and incomplete decompression are the main causes for persistence or recurrence of symptoms. We performed a retrospective study to assess the role of ultrasound in failed carpal tunnel decompression. Of 422 USG studies of the wrist performed at our center over the last 5 years, 14 were for failed carpal tunnel decompression. Scarring was noted in three patients, incomplete decompression in two patients, synovitis in one patient, and an anomalous muscle belly in one patient. No abnormality was detected in seven patients. We present a pictorial review of USG findings in failed carpal tunnel decompression.

  7. Decompression sickness in breath-hold divers: a review.

    Science.gov (United States)

    Lemaitre, Frederic; Fahlman, Andreas; Gardette, Bernard; Kohshi, Kiyotaka

    2009-12-01

    Although it has been generally assumed that the risk of decompression sickness is virtually zero during a single breath-hold dive in humans, repeated dives may result in a cumulative increase in the tissue and blood nitrogen tension. Many species of marine mammals perform extensive foraging bouts with deep and long dives interspersed by a short surface interval, and some human divers regularly perform repeated dives to 30-40 m or a single dive to more than 200 m, all of which may result in nitrogen concentrations that elicit symptoms of decompression sickness. Neurological problems have been reported in humans after single or repeated dives and recent necropsy reports in stranded marine mammals were suggestive of decompression sickness-like symptoms. Modelling attempts have suggested that marine mammals may live permanently with elevated nitrogen concentrations and may be at risk when altering their dive behaviour. In humans, non-pathogenic bubbles have been recorded and symptoms of decompression sickness have been reported after repeated dives to modest depths. The mechanisms implicated in these accidents indicate that repeated breath-hold dives with short surface intervals are factors that predispose to decompression sickness. During deep diving, the effect of pulmonary shunts and/or lung collapse may play a major role in reducing the incidence of decompression sickness in humans and marine mammals.

  8. Decompressive craniectomy in herpes simplex encephalitis

    Directory of Open Access Journals (Sweden)

    Muhammed Jasim Abdul Jalal

    2015-01-01

    Full Text Available Intracranial hypertension is a common cause of morbidity in herpes simplex encephalitis (HSE. HSE is the most common form of acute viral encephalitis. Hereby we report a case of HSE in which decompressive craniectomy was performed to treat refractory intracranial hypertension. A 32-year-old male presented with headache, vomiting, fever, and focal seizures involving the right upper limb. Cerebrospinal fluid-meningoencephalitic profile was positive for herpes simplex. Magnetic resonance image of the brain showed swollen and edematous right temporal lobe with increased signal in gray matter and subcortical white matter with loss of gray, white differentiation in T2-weighted sequences. Decompressive craniectomy was performed in view of refractory intracranial hypertension. Decompressive surgery for HSE with refractory hypertension can positively affect patient survival, with good outcomes in terms of cognitive functions.

  9. The role of volatile-saturation and adiabatic ascent of moderately hydrous melts on the formation of orbicules and comb layers in shallow subvolcanic conduits (Fisher Lake, Sierra Nevada).

    Science.gov (United States)

    McCarthy, A. J.; Müntener, O.

    2016-12-01

    Orbicules and comb layers are enigmatic features found sparsely distributed along plutonic contacts in a wide range of igneous environments. We provide new insights into the mechanisms responsible for the formation of these features by studying the spatial distribution, mineralogy and geochemistry of comb layers and orbicules from the Northern Sierra Nevada, Fisher Lake (USA). Over a range of studied comb textured layering, we show that the large majority of comb layers are cumulates formed by the initiation of plagioclase growth as a comb textured mineral. Plagioclase fractionation is followed by pyroxenes + oxides fractionation. Continuous crystal fractionation and conductive cooling from the host rock leads to amphibole saturation and the formation of late stage comb textured amphibole, leading to the formation of plagioclase- and plagioclase-amphibole comb textures. The lack of amphibole comb textures on orbicule rims as opposed to their widespread occurrence in comb layers, suggests that the presence of a thermal gradient plays an important role in diversifying comb textures. We propose that comb layers and orbicules are unique features which are controlled by the volatile content of ascending melts and ascent mechanisms. Thermodynamic calculations indicate that near-adiabatic decompression of water-undersaturated melts (ca. 4wt% H2O) through the crust will lead to superheating and dissolution of pre-existing minerals. Upon saturation of volatiles at shallow depth, degassing-induced undercooling of the decompressing melt will trigger heterogeneous nucleation of plagioclase on host rocks and remobilized xenoliths. The rarity of orbicules and comb layers in volcanic and plutonic rocks worldwide suggests that adiabatic decompression of moderately hydrous melts leading to superheating is a rare phenomena, with most arc melts ascending and cooling in small reservoirs throughout the crust, prior to emplacement at shallow depth as crystal-bearing magmas.

  10. Surgical Decompression for Traumatic Spinal Cord Injury in a ...

    African Journals Online (AJOL)

    2018-01-24

    Jan 24, 2018 ... spinal cord decompression with or without spinal stabilization in our region. Methodology: We ... decompression and fixation in this series were surgical site infections (11.4%) and ..... group and died of respiratory failure.

  11. Original endoscopic orbital decompression of lateral wall through hairline approach for Graves’ ophthalmopathy: an innovation of balanced orbital decompression

    Directory of Open Access Journals (Sweden)

    Gong Y

    2018-03-01

    Full Text Available Yi Gong,1,* Jiayang Yin,2,* Boding Tong,2 Jingkun Li,3 Jiexi Zeng,2 Zhongkun Zuo,1 Fei Ye,1 Yongheng Luo,4 Jing Xiao,1 Wei Xiong2 1Department of Minimal Invasive Surgery, The Second Xiangya Hospital, Central South University, Changsha, China; 2Department of Ophthalmology and Eye Research Center, The Second Xiangya Hospital, Central South University, Changsha, China; 3E.N.T Department, The Second Xiangya Hospital, Central South University, Changsha, China; 4Department of Radiology, The Second Xiangya Hospital, Central South University, Changsha, China *These authors contributed equally to this work Background: Orbital decompression is an important surgical procedure for treatment of Graves’ ophthalmopathy (GO, especially in women. It is reasonable for balanced orbital decompression of the lateral and medial wall. Various surgical approaches, including endoscopic transnasal surgery for medial wall and eye-side skin incision surgery for lateral wall, are being used nowadays, but many of them lack the validity, safety, or cosmetic effect. Patients and methods: Endoscopic orbital decompression of lateral wall through hairline approach and decompression of medial wall via endoscopic transnasal surgery was done to achieve a balanced orbital decompression, aiming to improve the appearance of proptosis and create conditions for possible strabismus and eyelid surgery afterward. From January 29, 2016 to February 14, 2017, this surgery was performed on 41 orbits in 38 patients with GO, all of which were at inactive stage of disease. Just before surgery and at least 3 months after surgery, Hertel’s ophthalmostatometer and computed tomography (CT were used to check proptosis and questionnaires of GO quality of life (QOL were completed. Findings: The postoperative retroversion of eyeball was 4.18±1.11 mm (Hertel’s ophthalmostatometer and 4.17±1.14 mm (CT method. The patients’ QOL was significantly improved, especially the change in appearance without

  12. Ultrastructural changes of compressed lumbar ventral nerve roots following decompression

    International Nuclear Information System (INIS)

    El-Barrany, Wagih G.; Hamdy, Raid M.; Al-Hayani, Abdulmonem A.; Jalalah, Sawsan M.; Al-Sayyad, Mohammad J.

    2006-01-01

    To study whether there will be permanent lumbar nerve rot scanning or degeneration secondary to continuous compression followed by decompression on the nerve roots, which can account for postlaminectomy leg weakness or back pain. The study was performed at the Department of Anatomy, Faulty of Medicine, king Abdulaziz University, Jeddah, Kingdom of Saudi Arabia during 2003-2005. Twenty-six adult male New Zealand rabbits were used in the present study. The ventral roots of the left fourth lumbar nerve were clamped for 2 weeks then decompression was allowed by removal of the clips. The left ventral roots of the fourth lumbar nerve were excised for electron microscopic study. One week after nerve root decompression, the ventral root peripheral to the site of compression showed signs of Wallerian degeneration together with signs of regeneration. Schwann cells and myelinated nerve fibers showed severe degenerative changes. Two weeks after decompression, the endoneurium of the ventral root showed extensive edema with an increase in the regenerating myelinated and unmyentilated nerve fibers, and fibroblasts proliferation. Three weeks after decompression, the endoneurium showed an increase in the regenerating myelinated and unmyelinated nerve fibers with diminution of the endoneurial edema, and number of macrophages and an increase in collagen fibrils. Five and 6 weeks after decompression, the endoneurium showed marked diminution of the edema, macrophages, mast cells and fibroblasts. The enoneurium was filed of myelinated and unmyelinated nerve fibers and collagen fibrils. Decompression of the compressed roots of a spinal nerve is followed by regeneration of the nerve fibers and nerve and nerve recovery without endoneurial scarring. (author)

  13. Aseptic necrosis in caisson workers: a new set of decompression tables.

    Science.gov (United States)

    Downs, G J; Kindwall, E P

    1986-06-01

    There is a high incidence of aseptic necrosis and decompression sickness among caisson workers due to inadequate decompression using the current OSHA decompression tables (1-7). Because of this, a new set of tables--Autodec III-O2--was developed which more effectively eliminates nitrogen from the body and, therefore, should decrease the incidence of both bends and aseptic necrosis. The Autodec III-O2 schedule's superiority was statistically significant at a level of 0.08 compared to the OSHA table. It is our conclusion that OSHA should adopt the Autodec III-O2 schedule as a replacement for the current decompression tables.

  14. Decompression to altitude: assumptions, experimental evidence, and future directions.

    Science.gov (United States)

    Foster, Philip P; Butler, Bruce D

    2009-02-01

    Although differences exist, hypobaric and hyperbaric exposures share common physiological, biochemical, and clinical features, and their comparison may provide further insight into the mechanisms of decompression stress. Although altitude decompression illness (DCI) has been experienced by high-altitude Air Force pilots and is common in ground-based experiments simulating decompression profiles of extravehicular activities (EVAs) or astronauts' space walks, no case has been reported during actual EVAs in the non-weight-bearing microgravity environment of orbital space missions. We are uncertain whether gravity influences decompression outcomes via nitrogen tissue washout or via alterations related to skeletal muscle activity. However, robust experimental evidence demonstrated the role of skeletal muscle exercise, activities, and/or movement in bubble formation and DCI occurrence. Dualism of effects of exercise, positive or negative, on bubble formation and DCI is a striking feature in hypobaric exposure. Therefore, the discussion and the structure of this review are centered on those highlighted unresolved topics about the relationship between muscle activity, decompression, and microgravity. This article also provides, in the context of altitude decompression, an overview of the role of denitrogenation, metabolic gases, gas micronuclei, stabilization of bubbles, biochemical pathways activated by bubbles, nitric oxide, oxygen, anthropometric or physiological variables, Doppler-detectable bubbles, and potential arterialization of bubbles. These findings and uncertainties will produce further physiological challenges to solve in order to line up for the programmed human return to the Moon, the preparation for human exploration of Mars, and the EVAs implementation in a non-zero gravity environment.

  15. Does smoking affect the outcomes of lumbar decompression surgery?

    Directory of Open Access Journals (Sweden)

    Mehta Radha

    2017-01-01

    Full Text Available Introduction: Lumbar decompressions and micro-discectomies are commonly performed non-complex spinal surgeries that do not involve the insertion of metalwork into the spine and are done for symptomatic disc prolapse and lumbar spinal stenosis, whereas complex-spinal surgery does require metalwork [1]. Studies of complex-spinal surgeries show that smoking has a significant negative impact on the outcome of the surgery [2] therefore, the cessation of smoking is advised prior to surgery [3]. There are evidences in the literature supportive as well as opposing this statement about continued smoking and poor outcome of decompressive spinal surgeries. Methods: We retrospectively reviewed 143 consecutive patients who have had either a micro-discectomy or a micro-decompression. Results: We found no statistical difference between smokers and non-smokers in the outcomes of lumbar decompression surgery. Both groups improved equally and significantly in terms of back pain, leg pain and functions. Out of 143 patients, only 2% more non-smokers had improved leg pain compared to smokers, 1% less non-smokers had improved back pain and 2% more non-smokers had an improved Oswestry Disability Index (ODI score. Discussion: We recommend that it is important to surgically treat both smokers and non-smokers in need of a lumbar spinal decompression.

  16. Compressed air tunneling and caisson work decompression procedures: development, problems, and solutions.

    Science.gov (United States)

    Kindwall, E P

    1997-01-01

    Multinational experience over many years indicates that all current air decompression schedules for caisson and compressed air tunnel workers are inadequate. All of them, including the Occupational Safety and Health Administration tables, produce dysbaric osteonecrosis. The problem is compounded because decompression sickness (DCS) tends to be underreported. Permanent damage in the form of central nervous system or brain damage may occur in compressed air tunnel workers, as seen on magnetic resonance imaging, in addition to dysbaric osteonecrosis. Oxygen decompression seems to be the only viable method for safely decompressing tunnel workers. Oxygen decompression of tunnel workers has been successfully used in Germany, France, and Brazil. In Germany, only oxygen decompression of compressed air workers is permitted. In our experience, U.S. Navy tables 5 and 6 usually prove adequate to treat DCS in caisson workers despite extremely long exposure times, allowing patients to return to work following treatment for DCS. Tables based on empirical data and not on mathematical formulas seem to be reasonably safe. U.S. Navy Exceptional Exposure Air Decompression tables are compared with caisson tables from the United States and Great Britain.

  17. Vertical displacement during late-collisional escape tectonics (Brasiliano Orogeny) in the Ribeira Belt, São Paulo State, Brazil

    Science.gov (United States)

    Hackspacher, P. C.; Godoy, A. M.

    1999-07-01

    During the Brasiliano-Pan-African Orogeny, West Gondwana formed by collisional processes around the São Francisco-Congo Craton. The Ribeira belt, in southeastern Brazil, resulted from northwestward collision (650-600 Ma), followed by large-scale northeast-southwest dextral strike-slip shear movements related to late-collisional escape tectonics ( ca 600 Ma). In São Paulo State, three groups, also interpreted as terranes, are recognised in the Ribeira Belt, the Embu, Itapira and São Roque Groups. The Embu and Itapira Groups are formed of sillimanite-gneisses, schists and migmatites intruded by Neoproterozoic calc-alkaline granitoids, all thrusted northwestward. The São Roque Group is composed of metasediments and metavolcanics in greenschist-facies. Its deformation indicates a transpressional regime associated with tectonic escape. Sub-alkaline granites were emplaced in shallow levels during this regime. Microstructural studies along the Itu, Moreiras and Taxaquara Shear Zones demonstrate the coexistence of horizontal and vertical displacement components during the transpressional regime. The vertical component is regarded as responsible for the lateral juxtaposition of different crustal levels.

  18. Evaluation of safety of hypobaric decompressions and EVA from positions of probabilistic theory

    Science.gov (United States)

    Nikolaev, V. P.

    Formation and subsequent evolution of gas bubbles in blood and tissues of subjects exposed to decompression are casual processes in their nature. Such character of bubbling processes in a body predetermines probabilistic character of decompression sickness (DCS) incidence in divers, aviators and astronauts. Our original probabilistic theory of decompression safety is based on stochastic models of these processes and on the concept of critical volume of a free gas phase in body tissues. From positions of this theory, the probability of DCS incidence during single-stage decompressions and during hypobaric decompressions under EVA in particular, is defined by the distribution of possible values of nucleation efficiency in "pain" tissues and by its critical significance depended on the parameters of a concrete decompression. In the present study the following is shown: 1) the dimensionless index of critical nucleation efficiency for "pain" body tissues is a more adequate index of decompression stress in comparison with Tissue Ratio, TR; 2) a priory the decompression under EVA performed according to the Russian protocol is more safe than decompression under EVA performed in accordance with the U.S. protocol; 3) the Russian space suit operated at a higher pressure and having a higher "rigidity" induces a stronger inhibition of mechanisms of cavitation and gas bubbles formation in tissues of a subject located in it, and by that provides a more considerable reduction of the DCS risk during real EVA performance.

  19. Piezosurgery in Modified Pterional Orbital Decompression Surgery in Graves Disease.

    Science.gov (United States)

    Grauvogel, Juergen; Scheiwe, Christian; Masalha, Waseem; Jarc, Nadja; Grauvogel, Tanja; Beringer, Andreas

    2017-10-01

    Piezosurgery uses microvibrations to selectively cut bone, preserving the adjacent soft tissue. The present study evaluated the use of piezosurgery for bone removal in orbital decompression surgery in Graves disease via a modified pterional approach. A piezosurgical device (Piezosurgery medical) was used in 14 patients (20 orbits) with Graves disease who underwent orbital decompression surgery in additional to drills and rongeurs for bone removal of the lateral orbital wall and orbital roof. The practicability, benefits, and drawbacks of this technique in orbital decompression surgery were recorded. Piezosurgery was evaluated with respect to safety, preciseness of bone cutting, and preservation of the adjacent dura and periorbita. Preoperative and postoperative clinical outcome data were assessed. The orbital decompression surgery was successful in all 20 orbits, with good clinical outcomes and no postoperative complications. Piezosurgery proved to be a safe tool, allowing selective bone cutting with no damage to the surrounding soft tissue structures. However, there were disadvantages concerning the intraoperative handling in the narrow space and the efficiency of bone removal was limited in the orbital decompression surgery compared with drills. Piezosurgery proved to be a useful tool in bone removal for orbital decompression in Graves disease. It is safe and easy to perform, without any danger of damage to adjacent tissue because of its selective bone-cutting properties. Nonetheless, further development of the device is necessary to overcome the disadvantages in intraoperative handling and the reduced bone removal rate. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Collagen levels are normalized after decompression of experimentally obstructed colon

    DEFF Research Database (Denmark)

    Rehn, Martin; Ågren, Sven Per Magnus; Syk, I

    2011-01-01

    Our aim was to define the dynamics in collagen concentrations in the large bowel wall following decompression of experimental obstruction.......Our aim was to define the dynamics in collagen concentrations in the large bowel wall following decompression of experimental obstruction....

  1. Intraoperative computed tomography for cervicomedullary decompression of foramen magnum stenosis in achondroplasia: two case reports.

    Science.gov (United States)

    Arishima, Hidetaka; Tsunetoshi, Kenzo; Kodera, Toshiaki; Kitai, Ryuhei; Takeuchi, Hiroaki; Kikuta, Ken-Ichiro

    2013-01-01

    The authors report two cases of cervicomedullary decompression of foramen magnum (FM) stenosis in children with achondroplasia using intraoperative computed tomography (iCT). A 14-month-old girl with myelopathy and retarded motor development, and a 10-year-old girl who had already undergone incomplete FM decompression was presented with myelopathy. Both patients underwent decompressive sub-occipitalcraniectomy and C1 laminectomy without duraplasty using iCT. It clearly showed the extent of FM decompression during surgery, which finally enabled sufficient decompression. After the operation, their myelopathy improved. We think that iCT can provide useful information and guidance for sufficient decompression for FM stenosis in children with achondroplasia.

  2. Decompressive craniectomy and hydrocephalus: proposal of a therapeutic flow chart.

    Science.gov (United States)

    Peraio, Simone; Calcagni, Maria Lucia; Mattoli, Maria Vittoria; Marziali, Giammaria; DE Bonis, Pasquale; Pompucci, Angelo; Anile, Carmelo; Mangiola, Annunziato

    2017-12-01

    Decompressive craniectomy (DC) may be necessary to save the lives of patients suffering from intracranial hypertension. However, this procedure is not complication-free. Its two main complications are hydrocephalus and the sinking skin-flap syndrome (SSFS). The radiological findings and the clinical evaluation may be not enough to decide when and/or how to treat hydrocephalus in a decompressed patient. SSFS and hydrocephalus may be not unrelated. In fact, a patient affected by hydrocephalus, after the ventriculo-peritoneal shunt, can develop SSFS; on the other hand, SSFS per se can cause hydrocephalus. Treating hydrocephalus in decompressed patients can be challenging. Radiological findings and clinical evaluation may not be enough to define the most appropriate therapeutic strategy. Cerebrospinal fluid (CSF) dynamics and metabolic evaluations can represent important diagnostic tools for assessing the need of a CSF shunt in patients with a poor baseline neurologic status. Based on our experience, we propose a flow chart for treating decompressed patients affected by ventriculomegaly.

  3. MRI diagnosis of acute spinal cord decompression sickness

    International Nuclear Information System (INIS)

    Tang Xiaofeng; Yuan Fengmei; Ma Heng; Xu Yongzhong; Gai Qingzhu; Wang Ying

    2008-01-01

    Objective: To describe MRI findings of acute spinal cord decompression sickness. Methods: MRI findings of 5 cases with clinical definite acute spinal cord decompression sickness were retrospectively analyzed. The main clinical informations included underwater performance history against regulations, short-term complete or incomplete spinal cord injury symptoms after fast going out of water, sensory disability and urinary and fecal incontinence, etc. Results: Spinal cord vacuole sign was found in all 5 cases. Iso-signal intensity (n=3), high signal intensity (n=1), and low signal intensity (n=1) was demonstrated on T 1 WI, and high signal intensity (n=5) was found on T 2 WI. Owl eye sign was detected in 3 cases, and lacune foci were seen in 2 cases. Conclusion: MRI findings of acute spinal cord decompression sickness had some characteristics, and it was easy to diagnose by combining diving history with clinical manifestations. (authors)

  4. Frequency of decompression illness among recent and extinct mammals and "reptiles": a review

    Science.gov (United States)

    Carlsen, Agnete Weinreich

    2017-08-01

    The frequency of decompression illness was high among the extinct marine "reptiles" and very low among the marine mammals. Signs of decompression illness are still found among turtles but whales and seals are unaffected. In humans, the risk of decompression illness is five times increased in individuals with Patent Foramen Ovale; this condition allows blood shunting from the venous circuit to the systemic circuit. This right-left shunt is characteristic of the "reptile" heart, and it is suggested that this could contribute to the high frequency of decompression illness in the extinct reptiles.

  5. Evaluation of decompression tables by Doppler technique in caisson work in The Netherlands.

    Science.gov (United States)

    Breedijk, J H; Van der Putten, G J G M; Schrier, L M; Sterk, W

    2009-01-01

    Hyperbaric work was conducted for constructing an underground tramway in the Netherlands. A total of 11,647 exposures were conducted in 41,957 hours. For these working conditions specifically developed oxygen decompression tables were used. Fifteen workers were submitted to Doppler monitoring after caisson work at a depth at 12 msw. Measurements were done according to the Canadian DCIEM protocol. For bubble grading the Kisman-Masurel 12-points ordinal scale (0-IV) was used. Bubbles were detected in 17 of the 38 examinations. The highest grade (III-) was found in four measurements. At rest the grading was never higher than I+. Two hours after decompression the grading was remarkably higher than after one hour. Bubble scores were relatively low, although the maximum grading probably is not reached within two hours after decompression. It may be concluded that the oxygen decompression tables used, were reliable under these heavy working conditions. At group level, decompression stress can be evaluated by Doppler monitoring. In order to reduce health hazard of employees, use of oxygen during decompression in caisson work should be embodied in the occupational standard.

  6. Identifying the Subtle Presentation of Decompression Sickness.

    Science.gov (United States)

    Alea, Kenneth

    2015-12-01

    Decompression sickness is an inherent occupational hazard that has the possibility to leave its victims with significant long-lasting effects that can potentially impact an aircrew's flight status. The relative infrequency of this hazard within the military flying community along with the potentially subtle presentation of decompression sickness (DCS) has the potential to result in delayed diagnosis and treatment, leading to residual deficits that can impact a patient's daily life or even lead to death. The patient presented in this work was diagnosed with a Type II DCS 21 h after a cabin decompression at 35,000 ft (10,668 m). The patient had been asymptomatic with a completely normal physical/neurological exam following his flight. The following day, he presented with excessive fatigue and on re-evaluation was recommended for hyperbaric therapy, during which his symptoms completely resolved. He was re-evaluated 14 d later and cleared to resume flight duties without further incident. The manifestation of this patient's decompression sickness was subtle and followed an evaluation that failed to identify any focal findings. A high index of suspicion with strict follow-up contributed to the identification of DCS in this case, resulting in definitive treatment and resolution of the patient's symptoms. Determination of the need for hyperbaric therapy following oxygen supplementation and a thorough history and physical is imperative. If the diagnosis is in question, consider preemptive hyperbaric therapy as the benefits of treatment in DCS outweigh the risks of treatment. Finally, this work introduces the future potential of neuropsychological testing for both the diagnosis of DCS as well as assessing the effectiveness of hyperbaric therapy in Type II DCS.

  7. You’re the Flight Surgeon: Pulmonary Decompression Sickness

    Science.gov (United States)

    2008-06-01

    follow-up of this patient Diagnosis: Decompression sickness (DeS) with pulmonary symptoms (Type Il DeS, older nomenclature). Treatment: Hyperbaric ...is quite clear thai any case of suspected decompression sickness in the USAF be discussed with the hyperbariC medicine specialists at Brooks City...physician in as respectful manner as you can that you suspect the patient’s condition is likely related to his hypobaric exposure. B. Agree with

  8. Reasons for revision surgery after orbital decompression for Graves’ orbitopathy

    Directory of Open Access Journals (Sweden)

    Stefano Sellari-Franceschini

    2008-06-01

    Full Text Available Stefano Sellari-Franceschini1, Luca Muscatello1, Veronica Seccia1, Riccardo Lenzi1, Amelia Santoro1, Marco Nardi2, Barbara Mazzi3, Aldo Pinchera3, Claudio Marcocci31Department of Neuroscience, 1st ENT division, 2Ophthalmology Division, 3Department of Endocrinology and Metabolism, Orthopaedics and Traumatology, Occupational Medicine, University of Pisa, ItalyObjectives: An analysis of complications and causes of failure in orbital decompression necessitating a second operation.Methods: Between December 1992 and April 2007, 375 patients (719 orbits were operated on using various techniques. Fourteen patients were initially operated on in our unit: 8 (group A1 were re-operated on after a short time due to complications connected with the decompression operation, 7 (group A2 were operated on after some time due to recurrence of the illness or unsatisfactory decompression (one patient is in both group A1 and A2. Five patients (group B underwent a first operation elsewhere.Results: For group A1 the most serious complications were connected to the nasal approach. For group A2 the operations were performed either because of a neuropathy recurrence or for further proptosis reduction due to recurrence or patient dissatisfaction. Lack of preoperative data hinders conclusions about group B, apart from one patient where the operation had not resolved a serious optic neuropathy after decompression based on Olivari technique combined with three-wall operation according to Mourits and colleagues (1990.Conclusions: We can deduce from group A1 that extreme attention is necessary during endonasal access, from group A2 that balancing the eyes is advisable, sacrificing maximum proptosis reduction to gain greater patient satisfaction, and from group B that decompression of the orbital apex is fundamental in the case of neuropathy.Keywords: orbital decompression, Graves’ orbitopathy, revision surgery

  9. Technique of ICP monitored stepwise intracranial decompression effectively reduces postoperative complications of severe bifrontal contusion

    Directory of Open Access Journals (Sweden)

    Guan eSun

    2016-04-01

    Full Text Available Background Bifrontal contusion is a common clinical brain injury. In the early stage, it is often mild, but it progresses rapidly and frequently worsens suddenly. This condition can become life threatening and therefore requires surgery. Conventional decompression craniectomy is the commonly used treatment method. In this study, the effect of ICP monitored stepwise intracranial decompression surgery on the prognosis of patients with acute severe bifrontal contusion was investigated. Method A total of 136 patients with severe bifrontal contusion combined with deteriorated intracranial hypertension admitted from March 2001 to March 2014 in our hospital were selected and randomly divided into two groups, i.e., a conventional decompression group and an intracranial pressure (ICP monitored stepwise intracranial decompression group (68 patients each, to conduct a retrospective study. The incidence rates of acute intraoperative encephalocele, delayed hematomas, and postoperative cerebral infarctions and the Glasgow outcome scores (GOSs 6 months after the surgery were compared between the two groups.Results (1 The incidence rates of acute encephalocele and contralateral delayed epidural hematoma in the stepwise decompression surgery group were significantly lower than those in the conventional decompression group; the differences were statistically significant (P < 0.05; (2 6 months after the surgery, the incidence of vegetative state and mortality in the stepwise decompression group were significantly lower than those in the conventional decompression group (P < 0.05; the rate of favorable prognosis in the stepwise decompression group was also significantly higher than that in the conventional decompression group (P < 0.05.Conclusions The ICP monitored stepwise intracranial decompression technique reduced the perioperative complications of traumatic brain injury through the gradual release of intracranial pressure and was beneficial to the prognosis of

  10. A Log Logistic Survival Model Applied to Hypobaric Decompression Sickness

    Science.gov (United States)

    Conkin, Johnny

    2001-01-01

    Decompression sickness (DCS) is a complex, multivariable problem. A mathematical description or model of the likelihood of DCS requires a large amount of quality research data, ideas on how to define a decompression dose using physical and physiological variables, and an appropriate analytical approach. It also requires a high-performance computer with specialized software. I have used published DCS data to develop my decompression doses, which are variants of equilibrium expressions for evolved gas plus other explanatory variables. My analytical approach is survival analysis, where the time of DCS occurrence is modeled. My conclusions can be applied to simple hypobaric decompressions - ascents lasting from 5 to 30 minutes - and, after minutes to hours, to denitrogenation (prebreathing). They are also applicable to long or short exposures, and can be used whether the sufferer of DCS is at rest or exercising at altitude. Ultimately I would like my models to be applied to astronauts to reduce the risk of DCS during spacewalks, as well as to future spaceflight crews on the Moon and Mars.

  11. Outcome after decompressive craniectomy for the treatment of severe traumatic brain injury.

    Science.gov (United States)

    Howard, Jerry Lee; Cipolle, Mark D; Anderson, Meredith; Sabella, Victoria; Shollenberger, Daniele; Li, P Mark; Pasquale, Michael D

    2008-08-01

    Using decompressive craniectomy as part of the treatment regimen for severe traumatic brain injury (STBI) has become more common at our Level I trauma center. This study was designed to examine this practice with particular attention to long-term functional outcome. A retrospective review of prospectively collected data was performed for patients with STBI admitted from January 1, 2003 to December 31, 2005. Our institution manages patients using the Brain Trauma Foundation Guidelines. Data collected from patients undergoing decompressive craniectomy included: age, Injury Severity Score, admission and follow-up Glasgow Coma Score, timing of, and indication for decompressive craniectomy, and procedure-related complications. The Extended Glasgow Outcome Scale (GOSE) was performed by a experienced trauma clinical research coordinator using a structured phone interview to assess long-term outcome in the survivors. Student's t test and chi2 were used to examine differences between groups. Forty STBI patients were treated with decompressive craniectomy; 24 were performed primarily in conjunction with urgent evacuation of extra-axial hemorrhage and 16 were performed primarily in response to increased intracranial pressure with 4 of these after an initial craniotomy. Decompressive craniectomy was very effective at lowering intracranial pressure in these 16 patients (35.0 mm Hg +/- 13.5 mm Hg to 14.6 mm Hg +/- 8.7 mm Hg, p = 0.005). Twenty-two decompressive craniectomy patients did not survive to hospital discharge, whereas admission Glasgow Coma Score and admission pupil size and reactivity correlated with outcome, age, and Injury Severity Score did not. At a mean of 11 months (range, 3-26 months) after decompressive craniectomy, 6 survivors had a poor functional outcome (GOSE 1-4), whereas 12 survivors had a good outcome (GOSE 5-8). Therefore, 70% of these patients had an unfavorable outcome (death or severe disability), and 30% had a favorable long-term functional outcome

  12. Decompression Sickness during Construction of the Dartford Tunnel

    Science.gov (United States)

    Golding, F. Campbell; Griffiths, P.; Hempleman, H. V.; Paton, W. D. M.; Walder, D. N.

    1960-01-01

    A clinical, radiological and statistical survey has been made of decompression sickness during the construction of the Dartford Tunnel. Over a period of two years, 1,200 men were employed on eight-hour shifts at pressures up to 28 pounds per square inch (p.s.i.). There were 689 cases of decompression sickness out of 122,000 compressions, an incidence of 0·56%. The majority of cases (94·9%) were simple “bends”. The remainder (5·1%) exhibited signs and symptoms other than pain and were more serious. All cases were successfully treated and no fatality or permanent disability occurred. In two serious cases, cysts in the lungs were discovered. It is suggested that these gave rise to air embolism when the subjects were decompressed, and pulmonary changes may contribute more than hitherto believed to the pathogenesis of bends. Some other clinical features are described, including “skin-mottling” and an association between bends and the site of an injury. The bends rate is higher for the back shift (3 p.m. to 11 p.m.) and the night shift (11 p.m. to 7 a.m.) than for the day shift. In the treatment of decompression sickness it appears to be more satisfactory to use the minimum pressure required for relief of symptoms followed by slow decompression with occasional “soaks”, than to attempt to drive the causative bubbles into solution with high pressures. During the contract the decompression tables recently prescribed by the Ministry of Labour were used. Evidence was obtained that they could be made safer, and that the two main assumptions on which they are based (that sickness will not occur at pressures below 18 p.s.i., and that a man saturates in four hours) may be incorrect. It is desirable to test tables based on 15 p.s.i. and eight-hour saturation. The existence of acclimatization to pressure was confirmed; it is such that the bends rate may fall in two to three weeks to 0·1% of the incidence on the first day of exposure. Acclimatization is lost again

  13. Health care worker decompression sickness: incidence, risk and mitigation.

    Science.gov (United States)

    Clarke, Richard

    2017-01-01

    Inadvertent exposure to radiation, chemical agents and biological factors are well recognized hazards associated with the health care delivery system. Less well appreciated yet no less harmful is risk of decompression sickness in those who accompany patients as inside attendants (IAs) during provision of hyperbaric oxygen therapy. Unlike the above hazards where avoidance is practiced, IA exposure to decompression sickness risk is unavoidable. While overall incidence is low, when calculated as number of cases over number of exposures or potential for a case during any given exposure, employee cumulative risk, defined here as number of cases over number of IAs, or risk that an IA may suffer a case, is not. Commonly, this unique occupational environmental injury responds favorably to therapeutic recompression and a period of recuperation. There are, however, permanent and career-ending consequences, and at least two nurses have succumbed to their decompression insults. The intent of this paper is to heighten awareness of hyperbaric attendant decompression sickness. It will serve as a review of reported cases and reconcile incidence against largely ignored individual worker risk. Mitigation strategies are summarized and an approach to more precisely identify risk factors that might prompt development of consensus screening standards is proposed. Copyright© Undersea and Hyperbaric Medical Society.

  14. Oxygen breathing accelerates decompression from saturation at 40 msw in 70-kg swine.

    Science.gov (United States)

    Petersen, Kyle; Soutiere, Shawn E; Tucker, Kathryn E; Dainer, Hugh M; Mahon, Richard T

    2010-07-01

    Submarine disaster survivors can be transferred from a disabled submarine at a pressure of 40 meters of seawater (msw) to a new rescue vehicle; however, they face an inherently risky surface interval before recompression and an enormous decompression obligation due to a high likelihood of saturation. The goal was to design a safe decompression protocol using oxygen breathing and a trial-and-error methodology. We hypothesized that depth, timing, and duration of oxygen breathing during decompression from saturation play a role to mitigate decompression outcomes. Yorkshire swine (67-75 kg), compressed to 40 msw for 22 h, underwent one of three accelerated decompression profiles: (1) 13.3 h staged air decompression to 18 msw, followed by 1 h oxygen breathing, then dropout; (2) direct decompression to 18 msw followed by 1 h oxygen breathing then dropout; and (3) 1 h oxygen prebreathe at 40 msw followed by 1 h mixed gas breathing at 26 msw, 1 h oxygen breathing at 18 msw, and 1 h ascent breathing oxygen. Animals underwent 2-h observation for signs of DCS. Profile 1 (14.3 h total) resulted in no deaths, no Type II DCS, and 20% Type I DCS. Profile 2 (2.1 h total) resulted in 13% death, 50% Type II DCS, and 75% Type I DCS. Profile 3 (4.5 h total) resulted in 14% death, 21% Type II DCS, and 57% Type I DCS. No oxygen associated seizures occurred. Profile 1 performed best, shortening decompression with no death or severe DCS, yet it may still exceed emergency operational utility in an actual submarine rescue.

  15. Modified “in-window” technique for decompressive craniotomy for severe brain injury

    Directory of Open Access Journals (Sweden)

    Jovanović Momir J.

    2015-01-01

    Full Text Available Increased intracranial pressure and decreased cerebral perfusion in patients with severe traumatic brain injury are associated with cerebral ischemia and poor outcome. Lowering intracranial pressure is one of the goals of treatment. We analyzed the effects of decompressive craniotomy on intracranial pressure levels and outcome. In addition, we compared the results of decompressive craniotomy performed with our original technique (modified “in-window” technique, with no need for cranioplasty with results of classic techniques. We formed two groups: 52 patients with TBI (GCS≤8, with monitored intracranial pressure, and the control: 45 patients without intracranial pressure monitoring. In the first group, malignant intracranial hypertension was treated by decompressive craniotomy, using a modified "in-window" technique. Results were analyzed using standard statistical methods. In the first group, with intracranial pressure monitoring, 17/52 had decompressive craniotomy, and significant reduction of intracranial pressure appeared in the early postoperative period (38.82 to 22.76 mmHg, mean, with significant decrease of intracranial pressure at the end of treatment, compared to the control group (mean=25.00, and 45.30 mmHg, respectively. Late complications were similar to results of other studies. Our results were 20% of epileptic seizures, 8% of hydrocephalus, 12% contusion/hematoma progression and 12% subdural hygroma. Outcome (measured with Glasgow Outcome Score-GOS in the first group, at the time of discharge, was better with decompressive craniotomy than without decompressive craniotomy (GOS=2.47, and GOS=1.00, respectively. Modified "in-window" technique for decompressive craniotomy in severe traumatic brain injury is safe, promising and according to our experience offers a lower rate of complications with no need for additional cranioplastic surgery.

  16. Emergency percutaneous needle decompression for tension pneumoperitoneum

    Directory of Open Access Journals (Sweden)

    Körner Markus

    2011-05-01

    Full Text Available Abstract Background Tension pneumoperitoneum as a complication of iatrogenic bowel perforation during endoscopy is a dramatic condition in which intraperitoneal air under pressure causes hemodynamic and ventilatory compromise. Like tension pneumothorax, urgent intervention is required. Immediate surgical decompression though is not always possible due to the limitations of the preclinical management and sometimes to capacity constraints of medical staff and equipment in the clinic. Methods This is a retrospective analysis of cases of pneumoperitoneum and tension pneumoperitoneum due to iatrogenic bowel perforation. All patients admitted to our surgical department between January 2005 and October 2010 were included. Tension pneumoperitoneum was diagnosed in those patients presenting signs of hemodynamic and ventilatory compromise in addition to abdominal distension. Results Between January 2005 and October 2010 eleven patients with iatrogenic bowel perforation were admitted to our surgical department. The mean time between perforation and admission was 36 ± 14 hrs (range 30 min - 130 hrs, between ER admission and begin of the operation 3 hrs and 15 min ± 47 min (range 60 min - 9 hrs. Three out of eleven patients had clinical signs of tension pneumoperitoneum. In those patients emergency percutaneous needle decompression was performed with a 16G venous catheter. This improved significantly the patients' condition (stabilization of vital signs, reducing jugular vein congestion, bridging the time to the start of the operation. Conclusions Hemodynamical and respiratory compromise in addition to abdominal distension shortly after endoscopy are strongly suggestive of tension pneumoperitoneum due to iatrogenic bowel perforation. This is a rare but life threatening condition and it can be managed in a preclinical and clinical setting with emergency percutaneous needle decompression like tension pneumothorax. Emergency percutaneous decompression is no

  17. Transnasal Endoscopic Optic Nerve Decompression in Post Traumatic Optic Neuropathy.

    Science.gov (United States)

    Gupta, Devang; Gadodia, Monica

    2018-03-01

    To quantify the successful outcome in patients following optic nerve decompression in post traumatic unilateral optic neuropathy in form of improvement in visual acuity. A prospective study was carried out over a period of 5 years (January 2011 to June 2016) at civil hospital Ahmedabad. Total 20 patients were selected with optic neuropathy including patients with direct and indirect trauma to unilateral optic nerve, not responding to conservative management, leading to optic neuropathy and subsequent impairment in vision and blindness. Decompression was done via Transnasal-Ethmo-sphenoidal route and outcome was assessed in form of post-operative visual acuity improvement at 1 month, 6 months and 1 year follow up. After surgical decompression complete recovery of visual acuity was achieved in 16 (80%) patients and partial recovery in 4 (20%). Endoscopic transnasal approach is beneficial in traumatic optic neuropathy not responding to steroid therapy and can prevent permanent disability if earlier intervention is done prior to irreversible damage to the nerve. Endoscopic optic nerve surgery can decompress the traumatic and oedematous optic nerve with proper exposure of orbital apex and optic canal without any major intracranial, intraorbital and transnasal complications.

  18. MRI Evaluation of Post Core Decompression Changes in Avascular Necrosis of Hip.

    Science.gov (United States)

    Nori, Madhavi; Marupaka, Sravan Kumar; Alluri, Swathi; Md, Naseeruddin; Irfan, Kazi Amir; Jampala, Venkateshwarlu; Apsingi, Sunil; Eachempati, Krishna Kiran

    2015-12-01

    Avascular necrosis of hip typically presents in young patients. Core decompression in precollapse stage provides pain relief and preservation of femoral head. The results of core decompression vary considerably despite early diagnosis. The role of MRI in monitoring patients post surgically has not been clearly defined. To study pre and post core decompression MRI changes in avascular necrosis of hip. This is a contiguous observational cohort of 40 hips treated by core decompression for precollapse avascular necrosis of femoral head, who had a baseline MRI performed before surgery. Core decompression of the femoral head was performed within 4 weeks. Follow up radiograph and MRI scans were done at six months. Harris hip score preoperatively, 1 month and 6 months after the surgery was noted. Success in this study was defined as postoperative increase in Harris hip score (HHS) by 20 points and no additional femoral collapse. End point of clinical adverse outcome as defined by fall in Harris hip score was conversion or intention to convert to total hip replacement (THR). MRI parameters in the follow up scan were compared to the preoperative MRI. Effect of core decompression on bone marrow oedema and femoral head collapse was noted. Results were analysed using SPSS software version. Harris hip score improved from 57 to 80 in all patients initially. Six hips had a fall in Harris hip score to mean value of 34.1 during follow up (9 to 12 months) and underwent total hip replacement. MRI predictors of positive outcome are lesions with grade A extent, Grade A & B location. Bone marrow oedema with lesions less than 50% involvement, medial and central location. Careful selection of patients by MR criteria for core decompression provides satisfactory outcome in precollapse stage of avascular necrosis of hip.

  19. Magmatic storage conditions, decompression rate, and incipient caldera collapse of the 1902 eruption of Santa Maria Volcano, Guatemala

    Science.gov (United States)

    Andrews, Benjamin J.

    2014-08-01

    Phase equilibria experiments and analysis of natural pumice and phenocryst compositions indicate the 1902 Santa Maria dacite was stored at ~ 140-170 MPa and 840-850 °C prior to eruption. H2O-saturated, cold-seal experiments conducted in vessels with an intrinsic log fO2 of NNO + 1 ± 0.5 show that the natural phase assemblage (melt + plagioclase + amphibole + orthopyroxene + Fe-Ti oxides + apatite) is stable from approximately 115-140 MPa at temperatures below ~ 825 °C, to ~ 840-860 °C at 150 MPa, to > 850 and Ridolfi et al., 2010) applied to experimental samples suggest two populations of amphiboles, phenocrysts grown during the experiments and inherited xenocrysts, but the pressure-temperature conditions returned by the geothermobarometer are routinely > 50 MPa and > 50 °C greater than experimental run conditions; precise estimates of magmatic conditions based solely upon amphibole composition are likely inaccurate. The experimental results and analysis of natural crystals suggest that although the natural amphiboles likely record a broad range of magmatic conditions, only the lower bounds of that range reflect pre-eruptive storage conditions. Comparison of Santa Maria microlite abundances with decompression experiments examining other silicic systems from the literature suggests that the 1902 dacite decompressed at the rate of ~ 0.005 to 0.01 MPa/s during the eruption. Applying the decompression rate with the previously described eruption rate of approximately 2-3 × 108 kg/s (Williams and Self, 1983; Carey and Sparks, 1986) to the conduit model CONFLOW reveals that the eruption conduit was dike-like with an along-strike length > 1 km. Despite depositing ~ 20 km3 of dacite tephra (equivalent to ~ 8.5 km3 magma), the 1902 eruption did not form an obvious caldera. This work suggests that collapse of the dike-like conduit terminated the eruption, preventing full caldera collapse.

  20. Failure rate of prehospital chest decompression after severe thoracic trauma.

    Science.gov (United States)

    Kaserer, Alexander; Stein, Philipp; Simmen, Hans-Peter; Spahn, Donat R; Neuhaus, Valentin

    2017-03-01

    Chest decompression can be performed by different techniques, like needle thoracocentesis (NT), lateral thoracostomy (LT), or tube thoracostomy (TT). The aim of this study was to report the incidence of prehospital chest decompression and to analyse the effectiveness of these techniques. In this retrospective case series study, all medical records of adult trauma patients undergoing prehospital chest decompression and admitted to the resuscitation area of a level-1 trauma center between 2009 and 2015 were reviewed and analysed. Only descriptive statistics were applied. In a 6-year period 24 of 2261 (1.1%) trauma patients had prehospital chest decompression. Seventeen patients had NT, six patients TT, one patient NT as well as TT, and no patients had LT. Prehospital successful release of a tension pneumothorax was reported by the paramedics in 83% (5/6) with TT, whereas NT was effective in 18% only (3/17). In five CT scans all thoracocentesis needles were either removed or extrapleural, one patient had a tension pneumothorax, and two patients had no pneumothorax. No NT or TT related complications were reported during hospitalization. Prehospital NT or TT is infrequently attempted in trauma patients. Especially NT is associated with a high failure rate of more than 80%, potentially due to an inadequate ratio between chest wall thickness and catheter length as previously published as well as a possible different pathophysiological cause of respiratory distress. Therefore, TT may be considered already in the prehospital setting to retain sufficient pleural decompression upon admission. Copyright © 2016. Published by Elsevier Inc.

  1. Decryption-decompression of AES protected ZIP files on GPUs

    Science.gov (United States)

    Duong, Tan Nhat; Pham, Phong Hong; Nguyen, Duc Huu; Nguyen, Thuy Thanh; Le, Hung Duc

    2011-10-01

    AES is a strong encryption system, so decryption-decompression of AES encrypted ZIP files requires very large computing power and techniques of reducing the password space. This makes implementations of techniques on common computing system not practical. In [1], we reduced the original very large password search space to a much smaller one which surely containing the correct password. Based on reduced set of passwords, in this paper, we parallel decryption, decompression and plain text recognition for encrypted ZIP files by using CUDA computing technology on graphics cards GeForce GTX295 of NVIDIA, to find out the correct password. The experimental results have shown that the speed of decrypting, decompressing, recognizing plain text and finding out the original password increases about from 45 to 180 times (depends on the number of GPUs) compared to sequential execution on the Intel Core 2 Quad Q8400 2.66 GHz. These results have demonstrated the potential applicability of GPUs in this cryptanalysis field.

  2. Trends in Orbital Decompression Techniques of Surveyed American Society of Ophthalmic Plastic and Reconstructive Surgery Members.

    Science.gov (United States)

    Reich, Shani S; Null, Robert C; Timoney, Peter J; Sokol, Jason A

    To assess current members of the American Society of Ophthalmic Plastic and Reconstructive Surgery (ASOPRS) regarding preference in surgical techniques for orbital decompression in Graves' disease. A 10-question web-based, anonymous survey was distributed to oculoplastic surgeons utilizing the ASOPRS listserv. The questions addressed the number of years of experience performing orbital decompression surgery, preferred surgical techniques, and whether orbital decompression was performed in collaboration with an ENT surgeon. Ninety ASOPRS members participated in the study. Most that completed the survey have performed orbital decompression surgery for >15 years. The majority of responders preferred a combined approach of floor and medial wall decompression or balanced lateral and medial wall decompression; only a minority selected a technique limited to 1 wall. Those surgeons who perform fat decompression were more likely to operate in collaboration with ENT. Most surgeons rarely remove the orbital strut, citing risk of worsening diplopia or orbital dystopia except in cases of optic nerve compression or severe proptosis. The most common reason given for performing orbital decompression was exposure keratopathy. The majority of surgeons perform the surgery without ENT involvement, and number of years of experience did not correlate significantly with collaboration with ENT. The majority of surveyed ASOPRS surgeons prefer a combined wall approach over single wall approach to initial orbital decompression. Despite the technological advances made in the field of modern endoscopic surgery, no single approach has been adopted by the ASOPRS community as the gold standard.

  3. Prognostic Factors for Satisfaction After Decompression Surgery for Lumbar Spinal Stenosis

    DEFF Research Database (Denmark)

    Paulsen, Rune Tendal; Bouknaitir, Jamal Bech; Fruensgaard, Søren

    2018-01-01

    : To present clinical outcome data and identify prognostic factors related to patient satisfaction 1 yr after posterior decompression surgery for lumbar spinal stenosis. METHOD: This multicenter register study included 2562 patients. Patients were treated with various types of posterior decompression. Patients...... with previous spine surgery or concomitant fusion were excluded. Patient satisfaction was analyzed for associations with age, sex, body mass index, smoking status, duration of pain, number of decompressed vertebral levels, comorbidities, and patient-reported outcome measures, which were used to quantify....... CONCLUSION: This study found smoking, long duration of leg pain, and cancerous and neurological disease to be associated with patient dissatisfaction, whereas good walking capacity at baseline was positively associated with satisfaction after 1 yr....

  4. A traumatic central cord syndrome occurring after adequate decompression for cervical spondylosis: biomechanics of injury: case report.

    Science.gov (United States)

    Dickerman, Rob D; Lefkowitz, Michael; Epstein, Joseph A

    2005-10-15

    Case report with review of the literature. To present the first case of a central cord syndrome occurring after adequate decompression, and review the mechanics of the cervical spinal cord injury and postoperative biomechanical and anatomic changes occurring after cervical decompressive laminectomy. Cervical spondylosis is a common pathoanatomic occurrence in the elderly population and is thought to be one of the primary causes for a central cord syndrome. Decompressive laminectomy with or without fusion has been a primary treatment for spondylotic disease and is thought to be protective against further injury. To our knowledge, there are no cases of a central cord syndrome occurring after adequate decompression reported in the literature. Case study with extensive review of the literature. The patient underwent C3-C7 cervical laminectomy without complications. After surgery, the patient's spasticity and gait difficulties improved. She was discharged to inpatient rehabilitation for further treatment of upper extremity weakness. The patient fell in the rehabilitation center, with a central cord syndrome despite adequate decompression of her spinal canal. The patient was treated conservatively for the central cord and had minimal improvement. Decompressive laminectomy provides an immediate decompressive effect on the spinal cord as seen by the dorsal migration of the cord, however, the biomechanics of the cervical spine after decompressive laminectomy remain uncertain. This case supports the ongoing research and need for more intensive research on postoperative cervical spine biomechanics, including decompressive laminectomies, decompressive laminectomy and fusion, and laminoplasty.

  5. Unusual Clinical Presentation and Role of Decompressive Craniectomy in Herpes Simplex Encephalitis.

    Science.gov (United States)

    Singhi, Pratibha; Saini, Arushi Gahlot; Sahu, Jitendra Kumar; Kumar, Nuthan; Vyas, Sameer; Vasishta, Rakesh Kumar; Aggarwal, Ashish

    2015-08-01

    Decompressive craniectomy in pediatric central nervous infections with refractory intracranial hypertension is less commonly practiced. We describe improved outcome of decompressive craniectomy in a 7-year-old boy with severe herpes simplex encephalitis and medically refractory intracranial hypertension, along with a brief review of the literature. Timely recognition of refractory intracranial hypertension and surgical decompression in children with herpes simplex encephalitis can be life-saving. Additionally, strokelike atypical presentations are being increasingly recognized in children with herpes simplex encephalitis and should not take one away from the underlying herpes simplex encephalitis. © The Author(s) 2014.

  6. Optic neuropathy in thyroid eye disease: results of the balanced decompression technique.

    Science.gov (United States)

    Baril, Catherine; Pouliot, Denis; Molgat, Yvonne

    2014-04-01

    To determine the efficacy of combined endoscopic medial and external lateral orbital decompression for the treatment of compressive optic neuropathy (CON) in thyroid eye disease (TED). A retrospective review of all patients undergoing combined surgical orbital decompression for CON between 2000 and 2010 was conducted. Fifty-nine eyes of 34 patients undergoing combined surgical orbital decompression for CON. Clinical outcome measures included visual acuity, Hardy-Rand-Rittler (HRR) colour plate testing, relative afferent pupillary defect, intraocular pressure measurement, and Hertel exophthalmometry. A CON score was calculated preoperatively and postoperatively based on the visual acuity and the missed HRR plates. A higher CON score correlates with more severe visual dysfunction. All patients had improvement of their optic neuropathy after surgical decompression. CON score was calculated for 54 eyes and decreased significantly from a mean of 13.2 ± 10.35 preoperatively to a mean of 8.51 ± 10.24 postoperatively (p < 0.0001). Optic neuropathy was completely resolved in 93.22% (55/59 eyes). Eighteen of 34 patients (52.94%) experienced development of new-onset postoperative strabismus that required subsequent surgical intervention. Endoscopic medial combined with external lateral orbital decompression is an effective technique for the treatment of TED-associated CON. © 2013 Canadian Ophthalmological Society Published by Canadian Ophthalmological Society All rights reserved.

  7. Redistribution of Decompression Stop Time from Shallow to Deep Stops Increases Incidence of Decompression Sickness in Air Decompression Dives

    Science.gov (United States)

    2011-07-22

    year old active duty male diver surfaced from a 170/30 air dive at <corr>12:11<corr> on 24AUG06 using MK 20 FFM and following the A-2 “deep stops...effort, and this episode responded immediately to pressure. AGE is unlikely due to the experience of the diver, the MK 20 FFM characteristics, and...from a 170/30 air dive at <corr>12:11<corr> on 24AUG06 using MK 20 FFM and following the A-2 “deep stops” experimental decompression profile

  8. 46 CFR 197.332 - PVHO-Decompression chambers.

    Science.gov (United States)

    2010-10-01

    .... Each decompression chamber must— (a) Meet the requirements of § 197.328; (b) Have internal dimensions... pressure; (d) Have a means of operating all installed man-way locking devices, except disabled shipping...

  9. Influence of surgical decompression on the expression of inflammatory and tissue repair biomarkers in periapical cysts.

    Science.gov (United States)

    Rodrigues, Janderson Teixeira; Dos Santos Antunes, Henrique; Armada, Luciana; Pires, Fábio Ramôa

    2017-12-01

    The biologic effects of surgical decompression on the epithelium and connective tissues of periapical cysts are not fully understood. The aim of this study was to evaluate the expression of tissue repair and inflammatory biomarkers in periapical cysts before and after surgical decompression. Nine specimens of periapical cysts treated with decompression before undergoing complete enucleation were immunohistochemically analyzed to investigate the expression of interleukin-1β, tumor necrosis factor-α, transforming growth factor-β1, matrix metalloproteinase-9, Ki-67, and epidermal growth factor receptor. Expression of the biomarkers was classified as positive, focal, or negative. Ki-67 immunoexpression was calculated as a cell proliferation index. The expression of the biomarkers was compared in the specimens from decompression and from the final surgical procedure. Computed tomography demonstrated that volume was reduced in all cysts after decompression. There were no differences in the immunoexpression of the proinflammatory and tissue repair biomarkers when comparing the specimens obtained before and after the decompression. Surgical decompression was efficient in reducing the volume of periapical cysts before complete enucleation. When comparing the specimens obtained from surgical decompression and from complete surgical removal, the immunohistochemical analysis did not show a decrease in proinflammatory biomarkers; neither did it show an increase in tissue repair biomarkers. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. The impact of dissolved fluorine on bubble nucleation in hydrous rhyolite melts

    Science.gov (United States)

    Gardner, James E.; Hajimirza, Sahand; Webster, James D.; Gonnermann, Helge M.

    2018-04-01

    Surface tension of hydrous rhyolitic melt is high enough that large degrees of supersaturation are needed to homogeneously nucleate H2O bubbles during eruptive magma ascent. This study examines whether dissolved fluorine lowers surface tension of hydrous rhyolite, and thus lowers the supersaturation required for bubble nucleation. Fluorine was targeted because it, like H2O, changes melt properties and is highly soluble, unlike all other common magmatic volatiles. Rhyolite melts were saturated at Ps = 245 MPa with H2O fluid that contained F, generating rhyolite with 6.7 ± 0.4 wt.% H2O and 1.1-1.3 wt.% F. When these melts were decompressed rapidly to Pf = 149-202 MPa and quenched after 60 s, bubbles nucleated at supersaturations of ΔP = Ps - Pf ≥52 MPa, and reached bubble number densities of NB = 1012-13 m-3 at ΔP = 78-101 MPa. In comparison, rhyolite saturated with 6.34 ± 0.09 wt.% H2O, but only 0.25 wt.% F, did not nucleate bubbles until ΔP ≥ 100-116 MPa, and even then, at significantly lower NB (<1010 m-3). Numerical modeling of bubble nucleation and growth was used to estimate the values of surface tension required to generate the observed values of NB. Slight differences in melt compositions (i.e., alkalinity and H2O content), H2O diffusivity, or melt viscosity cannot explain the observed differences in NB. Instead, surface tension of F-rich rhyolite must be lower by approximately 4% than that of F-poor rhyolite. This difference in surface tension is significant and, for example, exceeds that found between hydrous basaltic andesite and hydrous rhyolite. These results suggest that is likely that surface tension for F-rich magmas, such as topaz rhyolite, is significantly lower than for F-poor magmas.

  11. A Pottery Electric Kiln Using Decompression

    Science.gov (United States)

    Naoe, Nobuyuki; Yamada, Hirofumi; Nakayama, Tetsuo; Nakayama, Minoru; Minamide, Akiyuki; Takemata, Kazuya

    This paper presents a novel type electric kiln which fires the pottery using the decompression. The electric kiln is suitable for the environment and the energy saving as the pottery furnace. This paper described the baking principle and the baking characteristic of the novel type electric kiln.

  12. Geology of the Curimatau medium region (Paraiba State, Brazil) and the emplacement of the Dona Ines granite associated to the Brasiliano transcurrent shear zones

    International Nuclear Information System (INIS)

    Borges, Sergio Vieira Freire

    1996-01-01

    In an area of about 700 Km 2 located in the northeast of Paraiba State and having as main point the town of Dona Ines, a geologic/structural mapping, a gravimetric survey and radiometric dating using the Rb/Sr method in whole rock and Sm.Nd model ages were undertaken in order to study and to understand the geology of this portion of terrain, the emplacement of the Dona Ines granitoids and its relationship with the enclosing rocks and the deformation acting at the time of the intrusion. The age of the pluton of Dona Ines was determined by the Rb/Sr whole rock method as 560 ± 20 Ma (end of Brasiliano Cycle in the region). Sm.Nd model ages in granitoids of Araras, Belem and Dona Ines have revealed paleoproterozoic ages for their crustal sources, as indicated by the negative ε nd of this rock

  13. Computed chest tomography in an animal model for decompression sickness: radiologic, physiologic, and pathologic findings

    International Nuclear Information System (INIS)

    Reuter, M.; Struck, N.; Heller, M.; Tetzlaff, K.; Brasch, F.; Mueller, K.M.; Gerriets, T.; Weiher, M.; Hansen, J.; Hirt, S.

    2000-01-01

    This study was conducted to investigate the early pulmonary effects of acute decompression in an animal model for human decompression sickness by CT and light microscopy. Ten test pigs were exposed to severe decompression stress in a chamber dive. Three pigs were kept at ambient pressure to serve as controls. Decompression stress was monitored by measurement of pulmonary artery pressure and arterial and venous Doppler recording of bubbles of inert gas. Chest CT was performed pre- and postdive and in addition the inflated lungs were examined after resection. Each lung was investigated by light microscopy. Hemodynamic data and bubble recordings reflected severe decompression stress in the ten test pigs. Computed tomography revealed large quantities of ectopic gas, predominantly intravascular, in three of ten pigs. These findings corresponded to maximum bubble counts in the Doppler study. The remaining test pigs showed lower bubble grades and no ectopic gas by CT. Sporadic interstitial edema was demonstrated in all animals - both test and control pigs - by CT of resected lungs and on histologic examination. A severe compression-decompression schedule can liberate large volumes of inert gas which are detectable by CT. Despite this severe decompression stress, which led to venous microembolism, CT and light microscopy did not demonstrate changes in lung structure related to the experimental dive. Increased extravascular lung water found in all animals may be due to infusion therapy. (orig.)

  14. The incidence of diplopia following coronal and translid orbital decompression in Graves' orbitopathy

    NARCIS (Netherlands)

    Paridaens, D.; Hans, K.; van Buitenen, S.; Mourits, M. P.

    1998-01-01

    PURPOSE: Firstly, to assess the incidence of induced diplopia following orbital decompression in patients with Graves' orbitopathy. Secondly, to assess patient satisfaction after orbital decompression. Thirdly, to determine the factors that contribute to the variable reported incidence of diplopia

  15. Rapid decompression and desorption induced energetic failure in coal

    Directory of Open Access Journals (Sweden)

    Shugang Wang

    2015-06-01

    Full Text Available In this study, laboratory experiments are conducted to investigate the rapid decompression and desorption induced energetic failure in coal using a shock tube apparatus. Coal specimens are recovered from Colorado at a depth of 610 m. The coal specimens are saturated with the strong sorbing gas CO2 for a certain period and then the rupture disc is suddenly broken on top of the shock tube to generate a shock wave propagating upwards and a rarefaction wave propagating downwards through the specimen. This rapid decompression and desorption has the potential to cause energetic fragmentation in coal. Three types of behaviors in coal after rapid decompression are found, i.e. degassing without fragmentation, horizontal fragmentation, and vertical fragmentation. We speculate that the characteristics of fracture network (e.g. aperture, spacing, orientation and stiffness and gas desorption play a role in this dynamic event as coal can be considered as a dual porosity, dual permeability, dual stiffness sorbing medium. This study has important implications in understanding energetic failure process in underground coal mines such as coal gas outbursts.

  16. Deep lateral wall orbital decompression following strabismus surgery in patients with Type II ophthalmic Graves' disease.

    Science.gov (United States)

    Ellis, Michael P; Broxterman, Emily C; Hromas, Alan R; Whittaker, Thomas J; Sokol, Jason A

    2018-01-10

    Surgical management of ophthalmic Graves' disease traditionally involves, in order, orbital decompression, followed by strabismus surgery and eyelid surgery. Nunery et al. previously described two distinct sub-types of patients with ophthalmic Graves' disease; Type I patients exhibit no restrictive myopathy (no diplopia) as opposed to Type II patients who do exhibit restrictive myopathy (diplopia) and are far more likely to develop new-onset worsening diplopia following medial wall and floor decompression. Strabismus surgery involving extra-ocular muscle recession has, in turn, been shown to potentially worsen proptosis. Our experience with Type II patients who have already undergone medial wall and floor decompression and strabismus surgery found, when additional decompression is necessary, deep lateral wall decompression (DLWD) appears to have a low rate of post-operative primary-gaze diplopia. A case series of four Type II ophthalmic Graves' disease patients, all of whom had already undergone decompression and strabismus surgery, and went on to develop worsening proptosis or optic nerve compression necessitating further decompression thereafter. In all cases, patients were treated with DLWD. Institutional Review Board approval was granted by the University of Kansas. None of the four patients treated with this approach developed recurrent primary-gaze diplopia or required strabismus surgery following DLWD. While we still prefer to perform medial wall and floor decompression as the initial treatment for ophthalmic Graves' disease, for proptosis following consecutive strabismus surgery, DLWD appears to be effective with a low rate of recurrent primary-gaze diplopia.

  17. On-the-Fly Decompression and Rendering of Multiresolution Terrain

    Energy Technology Data Exchange (ETDEWEB)

    Lindstrom, P; Cohen, J D

    2009-04-02

    We present a streaming geometry compression codec for multiresolution, uniformly-gridded, triangular terrain patches that supports very fast decompression. Our method is based on linear prediction and residual coding for lossless compression of the full-resolution data. As simplified patches on coarser levels in the hierarchy already incur some data loss, we optionally allow further quantization for more lossy compression. The quantization levels are adaptive on a per-patch basis, while still permitting seamless, adaptive tessellations of the terrain. Our geometry compression on such a hierarchy achieves compression ratios of 3:1 to 12:1. Our scheme is not only suitable for fast decompression on the CPU, but also for parallel decoding on the GPU with peak throughput over 2 billion triangles per second. Each terrain patch is independently decompressed on the fly from a variable-rate bitstream by a GPU geometry program with no branches or conditionals. Thus we can store the geometry compressed on the GPU, reducing storage and bandwidth requirements throughout the system. In our rendering approach, only compressed bitstreams and the decoded height values in the view-dependent 'cut' are explicitly stored on the GPU. Normal vectors are computed in a streaming fashion, and remaining geometry and texture coordinates, as well as mesh connectivity, are shared and re-used for all patches. We demonstrate and evaluate our algorithms on a small prototype system in which all compressed geometry fits in the GPU memory and decompression occurs on the fly every rendering frame without any cache maintenance.

  18. EXPERIMENTAL STUDY OF DECOMPRESSION, PERMEABILITY AND HEALING OF SILICATE ROCKS IN FAULT ZONES

    Directory of Open Access Journals (Sweden)

    V. Ya. Medvedev

    2014-01-01

    Full Text Available The article presents results of petrophysical laboratory experiments in studies of decompression phenomena associated with consequences of abrupt displacements in fault zones. Decompression was studied in cases of controlled pressure drop that caused sharp changes of porosity and permeability parameters, and impacts of such decompression were analyzed. Healing of fractured-porous medium by newly formed phases was studied. After experiments with decompression, healing of fractures and pores in silicate rock samples (3×2×2 cm, 500 °C, 100 MPa took about 800–1000 hours, and strength of such rocks was restored to 0.6–0.7 of the original value. In nature, fracture healing is influenced by a variety of factors, such as size of discontinuities in rock masses, pressure and temperature conditions, pressure drop gradients, rock composition and saturation with fluid. Impacts of such factors are reviewed.

  19. Frictional melting and stick-slip behavior in volcanic conduits

    Science.gov (United States)

    Kendrick, Jackie Evan; Lavallee, Yan; Hirose, Takehiro; di Toro, Giulio; Hornby, Adrian Jakob; Hess, Kai-Uwe; Dingwell, Donald Bruce

    2013-04-01

    Dome-building eruptions have catastrophic potential, with dome collapse leading to devastating pyroclastic flows with almost no precursory warning. During dome growth, the driving forces of the buoyant magma may be superseded by controls along conduit margins; where brittle fracture and sliding can lead to formation of lubricating cataclasite and gouge. Under extreme friction, pseudotachylyte may form at the conduit margin. Understanding the conduit margin processes is vital to understanding the continuation of an eruption and we postulate that pseudotachylyte generation could be the underlying cause of stick-slip motion and associated seismic "drumbeats", which are so commonly observed at dome-building volcanoes. This view is supported by field evidence in the form of pseudotachylytes identified in lava dome products at Soufrière Hills (Montserrat) and Mount St. Helens (USA). Both eruptions were characterised by repetitive, periodic seismicity and lava spine extrusion of highly viscous magma. High velocity rotary shear (HVR) experiments demonstrate the propensity for melting of the andesitic and dacitic material (from Soufrière Hills and Mount St. Helens respectively) at upper conduit stress conditions (HVR experiments which mimic rapid velocity fluctuations in stick-slip behavior demonstrate velocity-weakening behavior of melt, with a tendency for unstable slip. During ascent, magma may slip and undergo melting along the conduit margin. In the process the shear resistance of the slip zone is increased, acting as a viscous brake halting slip (the "stick" of stick-slip motion). Sufficient buoyancy-driven pressures from ascending magma below eventually overcome resistance to produce a rapid slip event (the "slip") along the melt-bearing slip zone, which is temporarily lubricated due to velocity-weakening. New magma below experiences the same slip event more slowly (as the magma decompresses) to produce a viscous brake and the process is repeated. This allows a

  20. Severe traumatic brain injury managed with decompressive ...

    African Journals Online (AJOL)

    2012-05-29

    May 29, 2012 ... Patients with severe taumatic brain injury may develop intractable raised ICP resulting in high mortality ... Glasgow coma score was 8/15 (E1V3M4) and he had left ... An emergency right fronto-temporo-parietal decompressive.

  1. Analysis of direct costs of decompressive craniectomy in victims of traumatic brain injury.

    Science.gov (United States)

    Badke, Guilherme Lellis; Araujo, João Luiz Vitorino; Miura, Flávio Key; Guirado, Vinicius Monteiro de Paula; Saade, Nelson; Paiva, Aline Lariessy Campos; Avelar, Tiago Marques; Pedrozo, Charles Alfred Grander; Veiga, José Carlos Esteves

    2018-04-01

    Decompressive craniectomy is a procedure required in some cases of traumatic brain injury (TBI). This manuscript evaluates the direct costs and outcomes of decompressive craniectomy for TBI in a developing country and describes the epidemiological profile. A retrospective study was performed using a five-year neurosurgical database, taking a sample of patients with TBI who underwent decompressive craniectomy. Several variables were considered and a formula was developed for calculating the total cost. Most patients had multiple brain lesions and the majority (69.0%) developed an infectious complication. The general mortality index was 68.8%. The total cost was R$ 2,116,960.22 (US$ 661,550.06) and the mean patient cost was R$ 66,155.00 (US$ 20,673.44). Decompressive craniectomy for TBI is an expensive procedure that is also associated with high morbidity and mortality. This was the first study performed in a developing country that aimed to evaluate the direct costs. Prevention measures should be a priority.

  2. Spinal decompression sickness: mechanical studies and a model.

    Science.gov (United States)

    Hills, B A; James, P B

    1982-09-01

    Six experimental investigations of various mechanical aspects of the spinal cord are described relevant to its injury by gas deposited from solution by decompression. These show appreciable resistances to gas pockets dissipating by tracking along tissue boundaries or distending tissue, the back pressure often exceeding the probable blood perfusion pressure--particularly in the watershed zones. This leads to a simple mechanical model of spinal decompression sickness based on the vascular "waterfall" that is consistent with the pathology, the major quantitative aspects, and the symptomatology--especially the reversibility with recompression that is so difficult to explain by an embolic mechanism. The hypothesis is that autochthonous gas separating from solution in the spinal cord can reach sufficient local pressure to exceed the perfusion pressure and thus occlude blood flow.

  3. Nerve Decompression and Restless Legs Syndrome: A Retrospective Analysis

    Directory of Open Access Journals (Sweden)

    James C. Anderson

    2017-07-01

    Full Text Available IntroductionRestless legs syndrome (RLS is a prevalent sleep disorder affecting quality of life and is often comorbid with other neurological diseases, including peripheral neuropathy. The mechanisms related to RLS symptoms remain unclear, and treatment options are often aimed at symptom relief rather than etiology. RLS may present in distinct phenotypes often described as “primary” vs. “secondary” RLS. Secondary RLS is often associated with peripheral neuropathy. Nerve decompression surgery of the common and superficial fibular nerves is used to treat peripheral neuropathy. Anecdotally, surgeons sometimes report improved RLS symptoms following nerve decompression for peripheral neuropathy. The purpose of this retrospective analysis was to quantify the change in symptoms commonly associated with RLS using visual analog scales (VAS.MethodsForty-two patients completed VAS scales (0–10 for pain, burning, numbness, tingling, weakness, balance, tightness, aching, pulling, cramping, twitchy/jumpy, uneasy, creepy/crawly, and throbbing, both before and 15 weeks after surgical decompression.ResultsSubjects reported significant improvement among all VAS categories, except for “pulling” (P = 0.14. The change in VAS following surgery was negatively correlated with the pre-surgery VAS for both the summed VAS (r = −0.58, P < 0.001 and the individual VAS scores (all P < 0.01, such that patients who reported the worst symptoms before surgery exhibited relatively greater reductions in symptoms after surgery.ConclusionThis is the first study to suggest improvement in RLS symptoms following surgical decompression of the common and superficial fibular nerves. Further investigation is needed to quantify improvement using RLS-specific metrics and sleep quality assessments.

  4. Bilateral Ocular Decompression Retinopathy after Ahmed Valve Implantation for Uveitic Glaucoma

    Directory of Open Access Journals (Sweden)

    Javier Flores-Preciado

    2016-11-01

    Full Text Available Case Report: We report the case of a 29-year-old man who underwent Ahmed valve implantation in both eyes as treatment for uveitic glaucoma, subsequently presenting with bilateral ocular decompression retinopathy in the postoperative period. Discussion: Ocular decompression retinopathy is a rare complication of filtering surgery in patients with glaucoma; however, the course is benign in most cases, with spontaneous resolution of bleedings and improvement of visual acuity.

  5. Needle Decompression of Tension Pneumothorax Tactical Combat Casualty Care Guideline Recommendations

    Science.gov (United States)

    2012-07-06

    suspected torso trauma , consider a tension pneumothorax and decompress the chest on the side of the injury with a 14-gauge, 3.25 inch (8cm) needle...and known or suspected torso trauma , consider a tension pneumothorax and decompress the chest on the side of the injury with a 14-gauge, 3.25 inch...these studies used civilian volunteers, retrospective trauma database analysis and cadavers to measure the mean chest wall thickness. This population

  6. Sagittal imbalance in patients with lumbar spinal stenosis and outcomes after simple decompression surgery.

    Science.gov (United States)

    Shin, E Kyung; Kim, Chi Heon; Chung, Chun Kee; Choi, Yunhee; Yim, Dahae; Jung, Whei; Park, Sung Bae; Moon, Jung Hyeon; Heo, Won; Kim, Sung-Mi

    2017-02-01

    Lumbar spinal stenosis (LSS) is the most common lumbar degenerative disease, and sagittal imbalance is uncommon. Forward-bending posture, which is primarily caused by buckling of the ligamentum flavum, may be improved via simple decompression surgery. The objectives of this study were to identify the risk factors for sagittal imbalance and to describe the outcomes of simple decompression surgery. This is a retrospective nested case-control study PATIENT SAMPLE: This was a retrospective study that included 83 consecutive patients (M:F=46:37; mean age, 68.5±7.7 years) who underwent decompression surgery and a minimum of 12 months of follow-up. The primary end point was normalization of sagittal imbalance after decompression surgery. Sagittal imbalance was defined as a C7 sagittal vertical axis (SVA) ≥40 mm on a 36-inch-long lateral whole spine radiograph. Logistic regression analysis was used to identify the risk factors for sagittal imbalance. Bilateral decompression was performed via a unilateral approach with a tubular retractor. The SVA was measured on serial radiographs performed 1, 3, 6, and 12 months postoperatively. The prognostic factors for sagittal balance recovery were determined based on various clinical and radiological parameters. Sagittal imbalance was observed in 54% (45/83) of patients, and its risk factors were old age and a large mismatch between pelvic incidence and lumbar lordosis. The 1-year normalization rate was 73% after decompression surgery, and the median time to normalization was 1 to 3 months. Patients who did not experience SVA normalization exhibited low thoracic kyphosis (hazard ratio [HR], 1.04; 95% confidence interval [CI], 1.02-1.10) (pimbalance was observed in more than 50% of LSS patients, but this imbalance was correctable via simple decompression surgery in 70% of patients. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. [Microvascular decompression for hemifacial spasm. Ten years of experience].

    Science.gov (United States)

    Revuelta-Gutiérrez, Rogelio; Vales-Hidalgo, Lourdes Olivia; Arvizu-Saldaña, Emiliano; Hinojosa-González, Ramón; Reyes-Moreno, Ignacio

    2003-01-01

    Hemifacial spasm characterized by involuntary paroxistic contractions of the face is more frequent on left side and in females. Evolution is progressive and in a few cases may disappear. Management includes medical treatment, botulinum toxin, and microvascular decompression of the nerve. We present the results of 116 microvascular decompressions performed in 88 patients over 10 years. All patients had previous medical treatment. All patients were operated on with microsurgical technique by asterional craniotomy. Vascular compression was present in all cases with one exception. Follow-up was from 1 month to 133 months. Were achieved excellent results in 70.45% of cases after first operation, good results in 9.09%, and poor results in 20.45% of patients. Long-term results were excellent in 81.82%, good in 6.82%, and poor in 11.36% of patients. Hypoacusia and transitory facial palsy were the main complications. Hemifacial spasm is a painless but disabling entity. Medical treatment is effective in a limited fashion. Injection of botulinum toxin has good response but benefit is transitory. Microvascular decompression is treatment of choice because it is minimally invasive, not destructive, requires minimum technical support, and yields best long-term results.

  8. Evaluation on therapeutic effect of de-compressive craniectomies for patients with diffuse brain swelling

    International Nuclear Information System (INIS)

    Xiao Sanchao; Zhang Changrong; Zuo Yi; Zhou Xiaowei; Li Jian

    2000-01-01

    Objective: To evaluate the therapeutic effect of de-compressive craniectomies in acute traumatic patients with diffuse brain swelling. Methods: 23 patients with acute posttraumatic diffuse brain swelling admitted and confirmed by X-CT were randomly treated by surgical de-compressive craniectomies (operative group). Their treated results were compared with those of another 11 patients treated conservatively (non-operative group) at the same period. Results: The mortality rate was similar in both operative and nonoperative groups. Conclusion: The de-compressive craniectomy operation has no value and not valid for treatment of acute posttraumatic diffuse brain swelling

  9. Spontaneous extracranial decompression of epidural hematoma

    International Nuclear Information System (INIS)

    Neely, John C.; Jones, Blaise V.; Crone, Kerry R.

    2008-01-01

    Epidural hematoma (EDH) is a common sequela of head trauma in children. An increasing number are managed nonsurgically, with close clinical and imaging observation. We report the case of a traumatic EDH that spontaneously decompressed into the subgaleal space, demonstrated on serial CT scans that showed resolution of the EDH and concurrent enlargement of the subgaleal hematoma. (orig.)

  10. Spontaneous extracranial decompression of epidural hematoma

    Energy Technology Data Exchange (ETDEWEB)

    Neely, John C. [Marshall University School of Medicine, Huntington, WV (United States); Jones, Blaise V. [Cincinnati Children' s Hospital Medical Center, Department of Radiology, Cincinnati, OH (United States); Crone, Kerry R. [Cincinnati Children' s Hospital Medical Center, Division of Neurosurgery, Cincinnati, OH (United States)

    2008-03-15

    Epidural hematoma (EDH) is a common sequela of head trauma in children. An increasing number are managed nonsurgically, with close clinical and imaging observation. We report the case of a traumatic EDH that spontaneously decompressed into the subgaleal space, demonstrated on serial CT scans that showed resolution of the EDH and concurrent enlargement of the subgaleal hematoma. (orig.)

  11. Decompressive craniectomy following brain injury: factors important ...

    African Journals Online (AJOL)

    2010-01-07

    Jan 7, 2010 ... Background: Decompressive craniectomy (DC) is often performed as an empirical lifesaving measure to protect the injured brain from the damaging effects of propagating oedema and intracranial hypertension. However, there are no clearly defined indications or specified guidelines for patient selection for ...

  12. Surgical outcome after decompressive craniectomy in patients with extensive cerebral infarction

    International Nuclear Information System (INIS)

    Otani, Naoki; Takasato, Yoshio; Masaoka, Hiroyuki

    2008-01-01

    Extensive cerebral hemispheric infarction is a devastating condition leading to early death in nearly 80% of cases due to the rapid rise of intracranial pressure in spite of maximum medical treatment for brain edema and swelling. Recently, decompressive craniectomy has been reevaluated to prevent the brain herniation caused by extensive hemispheric cerebral infarction. We studied the surgical results after decompressive craniectomy for extensive cerebral infarction. Between December 1997 and August 2006, 13 consecutive patients (7 males and 6 females aged from 39 to 73 with a mean age of 59 years) with massive cerebral infarction of internal carotid (IC) (11 patients) and middle cerebral artery (MCA) (2 patients) territory were treated with decompressive craniectomy and dural plasty. Five patients had a left-sided stroke with severe aphasia. The cardioembolic source of stroke was seen in 5 patients. Surgery was performed at the point of neurological deterioration, anisocoria, and effacement of perimesencephalic cistern on CT findings. The mean time between stroke onset and surgery was 39.8 hr and ranged from 13 to 102 hr. Glasgow outcome scale (GOS) on discharge was moderately disabled (MD) 1, severe disabled (SD) 5, vegetative state (VS) 1, and dead (D) 3 (mortality rate 30.8%). Severe pneumoniae were the causes of death. All survivors underwent cranioplasty and were transferred with the aim of rehabilitation. In this study, we showed that the decompressive craniectomy reduced mortality after extensive cerebral infarction. However, the functional outcome and level of independence are poor. It seems that the early decompressive craniectomy should be aggressively performed for extensive cerebral infarction before neurological deterioration such as worsening of consciousness disturbance or pupil abnormalities. Further investigations will be needed to clarify the surgical indications, timing, and functional outcomes. (author)

  13. 40Ar/39Ar dating of 1.0-1.1 Ga magnetizations from the Sao Francisco and Kalahari cratons: tectonic implications for Pan-African and Brasiliano mobile belts

    International Nuclear Information System (INIS)

    Renne, P.R.; Onstott, T.C.; Agrella-Filho, M.S. d'; Pacca, I.G.; Teixeira, W.

    1990-01-01

    Paleomagnetic poles from 1.1-1.0 Ga dyke swarms in eastern Brazil (Sao Francisco Craton) are compared with 1.0 Ga poles from granulites of the Namaqua Province in southern Africa (Kalahari Graton). The intrusive ages of dykes are estimated from 40 Ar/ 39 Ar dating of outgassed biotites from baked country rocks. The age of magnetization for the granulites is derived by combining 40 Ar/ 39 Ar hornblende and biotite dates. When restored to a Mesozoic pre-drift configuration the paleomagnetic poles are in crude spatial agreement but are temporally discordant. To satisfy both paleomagnetic and geochronologic constraints, a reconstruction involving separation of the Sao Francisco and Kalahari cratons is required, indicating that the intervening Pan-African (Brasiliano) mobile belt may record a craton-craton collision. (orig.)

  14. [Orbital decompression in Grave's disease: comparison of techniques].

    Science.gov (United States)

    Sellari-Franceschini, S; Berrettini, S; Forli, F; Bartalena, L; Marcocci, C; Tanda, M L; Nardi, M; Lepri, A; Pinchera, A

    1999-12-01

    Grave's ophthalmopathy is an inflammatory, autoimmune disorder often associated with Grave's disease. The inflammatory infiltration involves the retrobulbar fatty tissue and the extrinsic eye muscles, causing proptosis, extraocular muscle dysfunction and often diplopia. Orbital decompression is an effective treatment in such cases, particularly when resistant to drugs and external radiation therapy. This work compares the results of orbital decompression performed by removing: a) the medial and lateral walls (Mourits technique) in 10 patients (19 orbits) and b) the medial and lower walls (Walsh-Ogura technique) in 17 patients (31 orbits). The results show that removing the floor of the orbit enables better reduction of proptosis but more easily leads to post-operative diplopia. Thus it proves necessary to combine the two techniques, modifying the surgical approach on a case-by-case basis.

  15. "White Cord Syndrome" of Acute Hemiparesis After Posterior Cervical Decompression and Fusion for Chronic Cervical Stenosis.

    Science.gov (United States)

    Antwi, Prince; Grant, Ryan; Kuzmik, Gregory; Abbed, Khalid

    2018-05-01

    "White cord syndrome" is a very rare condition thought to be due to acute reperfusion of chronically ischemic areas of the spinal cord. Its hallmark is the presence of intramedullary hyperintense signal on T2-weighted magnetic resonance imaging sequences in a patient with unexplained neurologic deficits following spinal cord decompression surgery. The syndrome is rare and has been reported previously in 2 patients following anterior cervical decompression and fusion. We report an additional case of this complication. A 68-year-old man developed acute left-sided hemiparesis after posterior cervical decompression and fusion for cervical spondylotic myelopathy. The patient improved with high-dose steroid therapy. The rare white cord syndrome following either anterior cervical decompression and fusion or posterior cervical decompression and fusion may be due to ischemic-reperfusion injury sustained by chronically compressed parts of the spinal cord. In previous reports, patients have improved following steroid therapy and acute rehabilitation. Copyright © 2018 Elsevier Inc. All rights reserved.

  16. Superior vena caval obstruction - decompression with chemotherapy and subsequent irradiation

    International Nuclear Information System (INIS)

    Kolaric, K.; Maricic, Z.; Dujmovic, I.; Mrsic, Z.

    1975-01-01

    The clinical picture, pathogenesis and etiology of malignant vena caval obstruction are described. The importance of using modern methods to treat this critical condition is emphasized. Furthermore, the authors examine the principles of chemotherapeutic decompression followed by irradiation. A single dose of nitrogen mustard was applied intravenously, followed by irradiation, on 24 patients with malignant vena caval obstruction. The results of this treatment are presented. The effect of this treatment was controlled by measuring the venous blood pressure and with chest X-rays. The authors conclude, that this method of decompression is successful in the palliative treatment of this syndrom. (orig.) [de

  17. Farris-Tang retractor in optic nerve sheath decompression surgery.

    Science.gov (United States)

    Spiegel, Jennifer A; Sokol, Jason A; Whittaker, Thomas J; Bernard, Benjamin; Farris, Bradley K

    2016-01-01

    Our purpose is to introduce the use of the Farris-Tang retractor in optic nerve sheath decompression surgery. The procedure of optic nerve sheath fenestration was reviewed at our tertiary care teaching hospital, including the use of the Farris-Tang retractor. Pseudotumor cerebri is a syndrome of increased intracranial pressure without a clear cause. Surgical treatment can be effective in cases in which medical therapy has failed and disc swelling with visual field loss progresses. Optic nerve sheath decompression surgery (ONDS) involves cutting slits or windows in the optic nerve sheath to allow cerebrospinal fluid to escape, reducing the pressure around the optic nerve. We introduce the Farris-Tang retractor, a retractor that allows for excellent visualization of the optic nerve sheath during this surgery, facilitating the fenestration of the sheath and visualization of the subsequent cerebrospinal fluid egress. Utilizing a medial conjunctival approach, the Farris-Tang retractor allows for easy retraction of the medial orbital tissue and reduces the incidence of orbital fat protrusion through Tenon's capsule. The Farris-Tang retractor allows safe, easy, and effective access to the optic nerve with good visualization in optic nerve sheath decompression surgery. This, in turn, allows for greater surgical efficiency and positive patient outcomes.

  18. A study on models of the inhomogeneity of the decompression in a bubble chamber

    International Nuclear Information System (INIS)

    Badier, J.

    1961-01-01

    Before building a hydrogen bubble chamber with liquid decompression the 'Saturne' cyclotron department wished to study for this chamber a shape leading to a homogeneous decompression as far as possible, without the production of vortices even after prolonged operation. The 'Office National d'Etudes et de Recherches Aeronautiques' (ONERA) were ready to carry out experiments on a model by strioscopy. The model was filled with air but an attempt was made to simulate the actual conditions as far as possible by varying the speed of the piston. The model was placed at one end of a tunnel, at the other end of which were produced alternatively compression and decompression waves. The study made it possible to conclude that it was necessary to make the base of the chamber round and that, in the space between the decompression cylinder and the body of the chamber it was advantageous to use 5 fins instead of 3. (author) [fr

  19. Physiotherapy after subacromial decompression surgery

    DEFF Research Database (Denmark)

    Christiansen, David Høyrup; Falla, Deborah; Frost, Poul

    2015-01-01

    This paper describes the development and details of a standardised physiotherapy exercise intervention designed to address pain and disability in patients with difficulty returning to usual activities after arthroscopic decompression surgery for subacromial impingement syndrome. To develop...... the intervention, the literature was reviewed with respect to the effectiveness of postoperative exercises, components of previous exercise programmes were extracted, and input from clinical physiotherapists in the field was obtained through a series of workshops. The physiotherapy exercise intervention...

  20. Molten (Mg0.88Fe0.12)2SiO4 at lower mantle conditions - Melting products and structure of quenched glasses

    Science.gov (United States)

    Williams, Quentin

    1990-01-01

    Infrared spectra of quenched magnesium silicate glasses synthesized by fusing olivine at pressures in excess of 50 GPa and temperatures greater than 2500 K demonstrate that silicon is dominantly present in four-fold coordination with respect to oxygen within these quenched glasses. This low coordination is attributed, by analogy with the structural behavior of glasses compressed at 300 K, to the instability of higher coordinations in glasses of these compositions on decompression. Spectra of glasses formed in a hydrous environment document that water is extensively soluble in melts at these high pressures and temperatures. Also, these results are consistent with the melting of (Mg0.88Fe0.12)2SiO4 compositions to liquids near pyroxene in stoichiometry under these conditions, with iron-rich magnesiowuestite being the liquidus phase.

  1. Does decompression of odontogenic cysts and cystlike lesions change the histologic diagnosis?

    Science.gov (United States)

    Schlieve, Thomas; Miloro, Michael; Kolokythas, Antonia

    2014-06-01

    The purpose of this study was to report the histopathologic findings after postdecompression definitive treatment of odontogenic cystlike lesions and determine whether the diagnosis was consistent with the pretreatment diagnosis, thereby answering the clinical question: does decompression change the histologic diagnosis? The authors implemented a retrospective cohort study from a sample of patients diagnosed with a benign odontogenic cystlike lesion and who underwent decompression followed by definitive surgery as part of their treatment. The predictor variable was treatment by decompression and the dependent variable was change in histologic diagnosis. Age, gender, and lesion location were included as variables. The χ(2) test was used for statistical analysis of the categorical data and P values less than .05 were considered statistically significant. Twenty-five cysts and cystlike lesions in 25 patients were treated with decompression followed by enucleation and curettage. The mean age was 34 years (range, 13 to 80 yr) and 56% (14) were male patients. Lesions were located in the mandible in 76% (19 of 25) of patients. Postdecompression histologic examination at the time of definitive surgical treatment was consistent with the preoperative biopsy diagnosis in 91% (10 of 11) of keratocystic odontogenic tumors, 67% (2 of 3) of glandular odontogenic cysts, 75% (3 of 4) of dentigerous cysts, and 100% (7 of 7) of cystic ameloblastomas. The histologic diagnosis at time of definitive treatment by enucleation and curettage is consistent with the predecompression diagnosis. Therefore, all lesions should be definitively treated after decompression based on the initial lesion diagnosis, with all patients placed on appropriate follow-up protocols. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. All rights reserved.

  2. Expansion of Chiari I-associated syringomyelia after posterior-fossa decompression.

    Science.gov (United States)

    Gil, Z; Rao, S; Constantini, S

    2000-09-01

    Chiari I malformation (CMI) is an abnormality that involves caudal herniation of the cerebellar tonsils into the foramen magnum. CMI has been shown to be closely associated with the development of syringomyelia (SM). Several theories have emerged to explain the apparent correlation between the existence of CMI with subsequent development of SM. However, the exact mechanism of the evolution of SM is still subject to controversy. We report here the case of a 12-year-old girl admitted to hospital with headache, vomiting, ataxia, and moderate pyramidal signs. Radiological evaluation revealed the presence of CMI, accompanied by a small SM. The patient underwent posterior fossa decompression and improved significantly. She was re-admitted 6 months later with clinical evidence of progressive spinal cord dysfunction. MR revealed gross expansion of the syrinx. This case raises questions regarding the pathophysiology of CMI and its association with SM. The case indicates the need for neurological and radiological follow-up for patients undergoing posterior fossa decompression due to CMI, even for those without an initial syrinx. This is the first report known to us of expansion of a syrinx following decompression of an associated CMI.

  3. Decompression of keratocystic odontogenic tumors leading to increased fibrosis, but without any change in epithelial proliferation.

    Science.gov (United States)

    Awni, Sarah; Conn, Brendan

    2017-06-01

    The aim of this study was to investigate whether decompression treatment induces changes in the histology or biologic behavior of keratocystic odontogenic tumor (KCOT). Seventeen patients with KCOT underwent decompression treatment with or without enucleation. Histologic evaluation and immunohistochemical expression of p53, Ki-67, and Bcl-2 were analyzed by using conventional microscopy. KCOT showed significantly increased fibrosis (P = .01) and a subjective reduction in mitotic activity (P = .03) after decompression. There were no statistically significant changes in the expression of proliferation markers. An increase in daughter-cysts or epithelial rests was seen after decompression (P = .04). Recurrence was noted in four of 16 cases, and expression of p53 was strongly correlated with prolonged duration of treatment (P = .01) and intense inflammatory changes (P = .02). Structural changes in the KCOT epithelium or capsule following decompression facilitate surgical removal of the tumor. There was no statistical evidence that decompression influences expression of proliferation markers in the lining, indicating that the potential for recurrence may not be restricted to the cellular level. The statistically significant increase of p53 expression with increased duration of treatment and increase of inflammation may also indicate the possibility of higher rates of recurrence with prolonged treatment and significant inflammatory changes. Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.

  4. Patient-specific core decompression surgery for early-stage ischemic necrosis of the femoral head.

    Directory of Open Access Journals (Sweden)

    Wei Wang

    Full Text Available Core decompression is an efficient treatment for early stage ischemic necrosis of the femoral head. In conventional procedures, the pre-operative X-ray only shows one plane of the ischemic area, which often results in inaccurate drilling. This paper introduces a new method that uses computer-assisted technology and rapid prototyping to enhance drilling accuracy during core decompression surgeries and presents a validation study of cadaveric tests.Twelve cadaveric human femurs were used to simulate early-stage ischemic necrosis. The core decompression target at the anterolateral femoral head was simulated using an embedded glass ball (target. Three positioning Kirschner wires were drilled into the top and bottom of the large rotor. The specimen was then subjected to computed tomography (CT. A CT image of the specimen was imported into the Mimics software to construct a three-dimensional model including the target. The best core decompression channel was then designed using the 3D model. A navigational template for the specimen was designed using the Pro/E software and manufactured by rapid prototyping technology to guide the drilling channel. The specimen-specific navigation template was installed on the specimen using positioning Kirschner wires. Drilling was performed using a guide needle through the guiding hole on the templates. The distance between the end point of the guide needle and the target was measured to validate the patient-specific surgical accuracy.The average distance between the tip of the guide needle drilled through the guiding template and the target was 1.92±0.071 mm.Core decompression using a computer-rapid prototyping template is a reliable and accurate technique that could provide a new method of precision decompression for early-stage ischemic necrosis.

  5. Anterior cervical decompression and fusion with caspar plate fixation

    International Nuclear Information System (INIS)

    Rehman, L.; Akbar, H.; Das, G.; Hashim, A.S.M.

    2013-01-01

    Objective: To evaluate the role of anterior cervical decompression and fixation with Caspar plating in cervical spine injury on neurological outcome. Study Design: A case series. Place and Duration of Study: Department of Neurosurgery, Jinnah Postgraduate Medical Centre, Karachi, from July 2008 to March 2011. Methodology: Thirty patients admitted with cervical spine injuries were inducted in the study. All cases were evaluated for their clinical features, level of injury and degree of neurological injury was assessed using Frankel grading. Pre and postoperative record with X-rays and MRI were maintained. Cervical traction was applied to patients with sub-luxation. All patients underwent anterior cervical decompression, fusion and Caspar plate fixation. The follow-up period was 6 months with clinical and radiological assessment. Results: Among 30 patients, 24 (80%) were males and 6 (20%) were females. Age ranged from 15 to 55 years. Causes of injury were road traffic accident (n = 20), fall (n = 8) and assault (n = 2). Commonest mode of injury was road traffic accident (66.6%). Postoperative follow-up showed that pain and neurological deficit were improved in 21 patients. There was no improvement in 7 patients, one patient deteriorated and one expired. All patients developed pain at donor site. Conclusion: Anterior decompression, fusion and fixation with Caspar plate is an effective method with good neurological and radiological outcome. However, it is associated with pain at donor site. (author)

  6. The effect of rapid decompression on femur blood flow of rabbits

    International Nuclear Information System (INIS)

    Yu Shaoning; Tian Wuxun; Zhu Xiangqi

    1997-01-01

    PURPOSE: To study the influence of regional blood flow in femur trochanter (FT) of rabbits' under rapid decompression after exposure to hyperbaric air. METHODS: Rabbits were placed in a hyperbaric chamber and exposed to the pressure of 0.5 MPa for 1.5 h, and the pressure was reduced to the atmosphere pressure at a uniform rate of 0.03 mPa/min. The regional blood flow of FT in rabbits were measured with 133 Xe washout methods. RESULTS: The normal average regional blood flow in left and right FT were 14.5 +- 1.7 and 14.1 +- 1.9 ml/(min·100g) respectively. After exposure to hyperbaric air with rapid decompression, the average regional blood flow of left and right FT were 11.1 +- 1.2 and 10.5 +- 1.6 ml/(min·100g) respectively. But the symptoms of dysbarism in these rabbits were various each other. CONCLUSIONS: After being exposed to hyperbaric air with rapid decompression, the blood flow of rabbits' femur trochanter were noticeably reduced

  7. Effect of active compression-decompression resuscitation (ACD-CPR) on survival: a combined analysis using individual patient data

    DEFF Research Database (Denmark)

    Mauer, Dietmar; Nolan, Jerry; Plaisance, Patrick

    1999-01-01

    Cardiopulmonary resuscitation, compression, decompression, cardiac arrest, emergency medical service, advanced cardiac life support, survival......Cardiopulmonary resuscitation, compression, decompression, cardiac arrest, emergency medical service, advanced cardiac life support, survival...

  8. Management of sinonasal complications after endoscopic orbital decompression for Graves' orbitopathy.

    Science.gov (United States)

    Antisdel, Jastin L; Gumber, Divya; Holmes, Janalee; Sindwani, Raj

    2013-09-01

    Endoscopic orbital decompression (EnOD) has proven to be safe and effective for the treatment of Graves' orbitopathy; however, complications do occur. Although the literature focuses on orbital complications, sinonasal complications including postobstructive sinusitis, hemorrhage, and cerebrospinal fluid (CSF) leak can also be challenging to manage. This study examines the incidence and management of sinonasal complications in these patients. Retrospective review. Clinical data, surgical findings, and postoperative outcomes were reviewed of patients who underwent EnOD for Graves' disease between March 2004 and November 2010. The incidence and management of postoperative sinonasal complications requiring an intervention were examined. The study group consisted of 50 consecutive patients (86 decompression procedures): 11 males and 39 females with an average age of 48.6 years (SD = 12.9). Incidence of significant sinonasal complications was 3.5% (5/86): with one patient experiencing postoperative hemorrhage requiring operative management, three patients with postoperative obstructive sinusitis, and one patient with nasal obstruction secondary to nasal adhesions that required lysis. The maxillary sinus was the most commonly involved and was managed using the mega-antrostomy technique. In the case of frontal sinusitis, an endoscopic transaxillary approach was utilized to avoid injury to decompressed orbital contents. All complications were successfully managed without sequelae. Sinonasal complications following EnOD are uncommon. In the setting of a decompressed orbit, even routine types of postoperative issues can be challenging and require additional considerations. Successful management of postoperative sinusitis related to outflow obstruction may require more extensive approaches and novel techniques. Copyright © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

  9. Immediate pain relief by microvascular decompression for idiopathic trigeminal neuralagia

    International Nuclear Information System (INIS)

    Haq, N.U.; Ali, M.; Khan, H.M.; Ishaq, M.; Khattak, M.I.

    2016-01-01

    Background: Trigeminal neuralgia is a common entity which is managed by neurosurgeons in day to day practice. Up-till now many treatment options have been adopted for it but micro-vascular decompression is much impressive in terms of pain control and recurrence rate in all of them. The objective of study was known the efficacy of micro vascular decompression for idiopathic trigeminal neuralgia by using muscle patch in terms of immediate pain relief. Methods: This descriptive study was carried out in Neurosurgery Department lady reading hospital, Peshawar from January 2010 to December 2012. All patients who underwent micro vascular decompression for idiopathic trigeminal neuralgia were included in the study. Patients were assessed 72 hours after the surgery by borrow neurological institute pain scale (BNIP scale) for pain relief and findings were documented on predesigned proforma. Data was analysed by SPSS-17. Results: Total 52 patients were included in this study. Among these 32 (61.53 percentage) were female and 20 (38.46 percentage) were males having age from 22-76 years (mean 49 years). Right side was involved in 36 (69.23 percentage) and left side in 16 (30.76 percentage) patients. Duration of symptoms ranged from 6 months to 16 years (mean 8 years). History of dental extraction and peripheral neurectomy was present in 20 (38 percentage) and 3(5.76 percentage) patients while V3 was most commonly involved branch with 28(57.69 percentage) frequency and combined V2,V3 involvement was 1 (11.53 percentage). Superior cerebellar artery was most common offending vessel in 46(88.46 percentage) while arachnoid adhesions were in 2(3.84 percentage) patients. We assessed patient immediate postoperatively using BNIP pain scale. Conclusion: Micro-vascular decompression is most effective mode of treatment for trigeminal neuralgia in terms of immediate pain relief. (author)

  10. MRI-guidance in percutaneous core decompression of osteonecrosis of the femoral head

    Energy Technology Data Exchange (ETDEWEB)

    Kerimaa, Pekka; Vaeaenaenen, Matti; Ojala, Risto; Tervonen, Osmo; Blanco Sequeiros, Roberto [Oulu University Hospital, Department of Radiology (Finland); Hyvoenen, Pekka; Lehenkari, Petri [Oulu University Hospital, Department of Surgery (Finland)

    2016-04-15

    The purpose of this study was to evaluate the usefulness of MRI-guidance for core decompression of avascular necrosis of the femoral head. Twelve MRI-guided core decompressions were performed on patients with different stages of avascular necrosis of the femoral head. The patients were asked to evaluate their pain and their ability to function before and after the procedure and imaging findings were reviewed respectively. Technical success in reaching the target was 100 % without complications. Mean duration of the procedure itself was 54 min. All patients with ARCO stage 1 osteonecrosis experienced clinical benefit and pathological MRI findings were seen to diminish. Patients with more advanced disease gained less, if any, benefit and total hip arthroplasty was eventually performed on four patients. MRI-guidance seems technically feasible, accurate and safe for core decompression of avascular necrosis of the femoral head. Patients with early stage osteonecrosis may benefit from the procedure. (orig.)

  11. MRI-guidance in percutaneous core decompression of osteonecrosis of the femoral head

    International Nuclear Information System (INIS)

    Kerimaa, Pekka; Vaeaenaenen, Matti; Ojala, Risto; Tervonen, Osmo; Blanco Sequeiros, Roberto; Hyvoenen, Pekka; Lehenkari, Petri

    2016-01-01

    The purpose of this study was to evaluate the usefulness of MRI-guidance for core decompression of avascular necrosis of the femoral head. Twelve MRI-guided core decompressions were performed on patients with different stages of avascular necrosis of the femoral head. The patients were asked to evaluate their pain and their ability to function before and after the procedure and imaging findings were reviewed respectively. Technical success in reaching the target was 100 % without complications. Mean duration of the procedure itself was 54 min. All patients with ARCO stage 1 osteonecrosis experienced clinical benefit and pathological MRI findings were seen to diminish. Patients with more advanced disease gained less, if any, benefit and total hip arthroplasty was eventually performed on four patients. MRI-guidance seems technically feasible, accurate and safe for core decompression of avascular necrosis of the femoral head. Patients with early stage osteonecrosis may benefit from the procedure. (orig.)

  12. Ascent Rates from Melt Embayments: Insights into the Eruption Dynamics of Arc Volcanoes

    Science.gov (United States)

    Ruprecht, P.; Lloyd, A. S.; Hauri, E.; Rose, W. I.; Gonnermann, H. M.; Plank, T. A.

    2014-12-01

    A significant fraction of the magma that is added from the mantle to the subvolcanic plumbing system ultimately erupts at the surface. The initial volatile content of the magmas as well as the interplay between volatile loss and magma ascent plays a significant role in determining the eruption style (effusive versus explosive) as well as the magnitude of the eruption. The October 17, 1974 sub-Plinian eruption of Volcán de Fuego represents a particularly well-characterized system in terms of volatile content and magma chemistry to investigate the relation between initial water content of the magmas and the ascent rate. By modeling volatile element distribution in melt embayments through diffusion and degassing during ascent we can estimate magma ascent from the storage region in the crust to the surface. The novel aspect is the measurement of concentration gradients multiple volatile elements (in particular CO2, H2O, S) at fine-scale (5-10 μm) using the NanoSIMS. The wide range in diffusivity and solubility of these different volatiles provides multiple constraints on ascent timescales over a range of depths. H2O, CO2, and S all decrease toward the embayment outlet bubble documenting the loss of H2O and CO2 compared to an extensive melt inclusion suite from the same day of the eruption. The data is best described by a two-stage model. At high pressure (>145 MPa) decompression is slow (0.05- 0.3 MPa/s) and CO2 is bled off predominantly. At shallow levels decompression accelerates to 0.3-0.5 MPa/s at the point of H2O exsolution, which strongly affects the buoyancy of the ascending magma. The magma ascent rates presented are among the first for explosive basaltic eruptions and demonstrate the potential of the embayment method for quantifying magmatic timescales associated with eruptions of different vigor. [1] Lloyd et al. (2014) JVGR, http://dx.doi.org/10.1016/j.jvolgeores.2014.06.002

  13. Does Early Decompressive Craniectomy Improve Outcome? Experience from an Active UK Recruiter Centre

    Directory of Open Access Journals (Sweden)

    E. García Vicente

    2013-01-01

    Full Text Available Introduction. The results of the recent DECRA study suggest that although craniectomy decreases ICP and ICU length of stay, it is also associated with worst outcomes. Our experience, illustrated by these two striking cases, supports that early decompressive craniectomy may significantly improve the outcome in selected patients. Case Reports. The first patient, a 20-year-old man who suffered severe brain contusion and subarachnoid haemorrhage after a fall downstairs, with refractory ICP of 35 mmHg, despite maximal medical therapy, eventually underwent decompressive craniectomy. After 18 days in intensive care, he was discharged for rehabilitation. The second patient, a 23-year-old man was found at the scene of a road accident with a GCS of 3 and fixed, dilated pupils who underwent extensive unilateral decompressive craniectomy for refractory intracranial hypertension. After three weeks of cooling, paralysis, and neuroprotection, he eventually left ICU for rehabilitation. Outcomes. Four months after leaving ICU, the first patient abseiled 40 m down the main building of St. Mary’s Hospital to raise money for the Trauma Unit. He has returned to part-time work. The second patient, was decannulated less than a month later and made a full cognitive recovery. A year later, with a titanium skull prosthesis, he is back to part-time work and to playing football. Conclusions. Despite the conclusions of the DECRA study, our experience of the use of early decompressive craniectomy has been associated with outstanding outcomes. We are currently actively recruiting patients into the RESCUEicp trial and have high hopes that it will clarify the role of the decompressive craniectomy in traumatic brain injury and whether it effectively improves outcomes.

  14. Decompression of the facial nerve in cases of hemifacial spasm

    Directory of Open Access Journals (Sweden)

    Karsten Kettel

    1954-12-01

    Full Text Available Among 11 patients a complete cure was obtained in one case, a fair result in 4 cases, while in 6 cases the effect of the operation has only been temporary and full recurrence has taken place. Even if decompression has thus resulted in a few recoveries and improvements, the results in the majority of cases have been disappointing. Everything points to hemifacial spasm being due to a disorder of the lower motor neuron. Intracranial lesions in the vicinity of the facial nerve are known to have resulted in irritation and spasm. It may be perfectly true that the majority of cases of hemifacial spasm are due to a lesion, the nature of which may vary, in the Fallopian canal near the stylomastoid foramen, not least the postparalytic following Bell's palsy. But the disappointing results of decompression seems to indicate that at the time of operation irreparable damage to the nerve has in the majority of cases been already done. Consequently I gave up decompression in cases of hemifacial spasm some years ago. Good results from injections of alcohol into the nerve have been reported13 but I prefer selective sections of the branches to the muscles involved as described by German and Greenwood8.

  15. Decompression syndrome (Caisson disease) in an Indian diver.

    Science.gov (United States)

    Phatak, Uday A; David, Eric J; Kulkarni, Pravin M

    2010-07-01

    Acute decompression syndrome (Caisson's disease) is an acute neurological emergency in divers. It is caused due to release of nitrogen gas bubbles that impinge the blood vessels of the spinal cord and brain and result in severe neurodeficit. There are very few case reports in Indian literature. There are multiple factors in the pathogenesis of Acute decompression syndrome (Caisson's disease) such as health problems in divers (respiratory problems or congenital heart diseases like atrial septal defect, patent ductus arteriosus etc), speed of ascent from the depth and habits like smoking that render divers susceptible for such neurological emergency. Usually, immediate diagnosis of such a condition with MRI is not possible in hospitals in the Coastal border. Even though, MRI is performed, it has very low specificity and sensitivity. Facilities like hyperbaric oxygen treatment are virtually non-existent in these hospitals. Therefore, proper education of the divers and appropriate preventive measures in professional or recreational divers is recommended.

  16. Decompression syndrome (Caisson disease in an Indian diver

    Directory of Open Access Journals (Sweden)

    Phatak Uday

    2010-01-01

    Full Text Available Acute decompression syndrome (Caisson′s disease is an acute neurological emergency in divers. It is caused due to release of nitrogen gas bubbles that impinge the blood vessels of the spinal cord and brain and result in severe neurodeficit. There are very few case reports in Indian literature. There are multiple factors in the pathogenesis of Acute decompression syndrome (Caisson′s disease such as health problems in divers (respiratory problems or congenital heart diseases like atrial septal defect, patent ductus arteriosus etc, speed of ascent from the depth and habits like smoking that render divers susceptible for such neurological emergency. Usually, immediate diagnosis of such a condition with MRI is not possible in hospitals in the Coastal border. Even though, MRI is performed, it has very low specificity and sensitivity. Facilities like hyperbaric oxygen treatment are virtually non-existent in these hospitals. Therefore, proper education of the divers and appropriate preventive measures in professional or recreational divers is recommended.

  17. General Purpose Graphics Processing Unit Based High-Rate Rice Decompression and Reed-Solomon Decoding

    Energy Technology Data Exchange (ETDEWEB)

    Loughry, Thomas A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    As the volume of data acquired by space-based sensors increases, mission data compression/decompression and forward error correction code processing performance must likewise scale. This competency development effort was explored using the General Purpose Graphics Processing Unit (GPGPU) to accomplish high-rate Rice Decompression and high-rate Reed-Solomon (RS) decoding at the satellite mission ground station. Each algorithm was implemented and benchmarked on a single GPGPU. Distributed processing across one to four GPGPUs was also investigated. The results show that the GPGPU has considerable potential for performing satellite communication Data Signal Processing, with three times or better performance improvements and up to ten times reduction in cost over custom hardware, at least in the case of Rice Decompression and Reed-Solomon Decoding.

  18. Sulfur Saturation Limits in Silicate Melts and their Implications for Core Formation Scenarios for Terrestrial Planets

    Science.gov (United States)

    Holzheid, Astrid; Grove, Timothy L.

    2002-01-01

    This study explores the controls of temperature, pressure, and silicate melt composition on S solubility in silicate liquids. The solubility of S in FeO-containing silicate melts in equilibrium with metal sulfide increases significantly with increasing temperature but decreases with increasing pressure. The silicate melt structure also exercises a control on S solubility. Increasing the degree of polymerization of the silicate melt structure lowers the S solubility in the silicate liquid. The new set of experimental data is used to expand the model of Mavrogenes and O'Neill(1999) for S solubility in silicate liquids by incorporating the influence of the silicate melt structure. The expected S solubility in the ascending magma is calculated using the expanded model. Because the negative pressure dependence of S solubility is more influential than the positive temperature dependence, decompression and adiabatic ascent of a formerly S-saturated silicate magma will lead to S undersaturation. A primitive magma that is S-saturated in its source region will, therefore, become S-undersaturated as it ascends to shallower depth. In order to precipitate magmatic sulfides, the magma must first cool and undergo fractional crystallization to reach S saturation. The S content in a metallic liquid that is in equilibrium with a magma ocean that contains approx. 200 ppm S (i.e., Earth's bulk mantle S content) ranges from 5.5 to 12 wt% S. This range of S values encompasses the amount of S (9 to 12 wt%) that would be present in the outer core if S is the light element. Thus, the Earth's proto-mantle could be in equilibrium (in terms of the preserved S abundance) with a core-forming metallic phase.

  19. Protective effects of fluoxetine on decompression sickness in mice.

    Directory of Open Access Journals (Sweden)

    Jean-Eric Blatteau

    Full Text Available Massive bubble formation after diving can lead to decompression sickness (DCS that can result in central nervous system disorders or even death. Bubbles alter the vascular endothelium and activate blood cells and inflammatory pathways, leading to a systemic pathophysiological process that promotes ischemic damage. Fluoxetine, a well-known antidepressant, is recognized as having anti-inflammatory properties at the systemic level, as well as in the setting of cerebral ischemia. We report a beneficial clinical effect associated with fluoxetine in experimental DCS. 91 mice were subjected to a simulated dive at 90 msw for 45 min before rapid decompression. The experimental group received 50 mg/kg of fluoxetine 18 hours before hyperbaric exposure (n = 46 while controls were not treated (n = 45. Clinical assessment took place over a period of 30 min after surfacing. At the end, blood samples were collected for blood cells counts and cytokine IL-6 detection. There were significantly fewer manifestations of DCS in the fluoxetine group than in the controls (43.5% versus 75.5%, respectively; p = 0.004. Survivors showed a better and significant neurological recovery with fluoxetine. Platelets and red cells were significantly decreased after decompression in controls but not in the treated mice. Fluoxetine reduced circulating IL-6, a relevant marker of systemic inflammation in DCS. We concluded that fluoxetine decreased the incidence of DCS and improved motor recovery, by limiting inflammation processes.

  20. Report on computation of repetitive hyperbaric-hypobaric decompression tables

    Science.gov (United States)

    Edel, P. O.

    1975-01-01

    The tables were constructed specifically for NASA's simulated weightlessness training program; they provide for 8 depth ranges covering depths from 7 to 47 FSW, with exposure times of 15 to 360 minutes. These tables were based up on an 8 compartment model using tissue half-time values of 5 to 360 minutes and Workmanline M-values for control of the decompression obligation resulting from hyperbaric exposures. Supersaturation ratios of 1.55:1 to 2:1 were used for control of ascents to altitude following such repetitive dives. Adequacy of the method and the resultant tables were determined in light of past experience with decompression involving hyperbaric-hypobaric interfaces in human exposures. Using these criteria, the method showed conformity with empirically determined values. In areas where a discrepancy existed, the tables would err in the direction of safety.

  1. Melting mode and source lithology inferred from trace element systematic in historical olivine from Lanzarote, Canary Islands

    Science.gov (United States)

    Gómez-Ulla, Alejandra; Sigmarsson, Olgeir; Guðfinnsson, Guðmundur H.

    2017-04-01

    Trace element concentrations and ratios in olivine phenocrysts, such as fractionation-corrected Ni x (FeO/MgO) and Fe/Mn, have been shown useful as probes of pyroxenite derived component in mixtures of primary mantle melts (e.g. Sobolev et al., 2007). For instance, higher Ni and lower Mn and Ca contents are expected in partial melts of pyroxenite compared to those of lherzolite. We have measured trace element concentrations in olivine from 1730-1736 AD (Timanfaya) and 1824 AD eruptions in Lanzarote (Canary Islands), which erupted mafic and mantle nodule bearing magmas, ranging in composition from highly silica-undersaturated basanite through alkali basalt to tholeiite. The early basanite exhibit the largest olivine trace element variation covering the range of those from MORB and OIB worldwide, whereas later erupted tholeiite have values typical from pyroxenite derived melts. The Fo value decreased systematically with time during the 1730-36 eruption and the proportion of silica-saturated primary melt increased in the parental magma mixture with time. At the end of the eruption, tholeiite magmas crystallized olivine with, increasing concentrations of Mn and Ca and higher Ca/Al at relatively uniform Ni x (FeO/MgO) and Fe/Mn, all of which is readily explained by increased decompression melting at lower temperature. The basanite from the eruption that took place in 1824 AD has olivine with even higher Fo value and trace element variability similar those of the Timanfaya basanite. The fact that the Lanzarote basanite contain olivine with trace element systematic spanning that of MORB and pyroxenite melt can be explained by CO2-flux melting of a lithologically heterogeneous source, generating the diverse compositions. Initial reactive porous flow through depleted oceanic lithosphere and equilibration with dunitic restite of percolating pyroxenite melt may have amplified the observed Ni depletion in olivine of the earliest basanite. The fact that olivine compositions and

  2. Early versus Late Decompression for Traumatic Spinal Cord Injuries; a Systematic Review and Meta-analysis

    Directory of Open Access Journals (Sweden)

    Mahmoud Yousefifard

    2017-01-01

    Full Text Available Introduction: Despite the vast number of surveys, no consensus has been reached on the optimum timing of spinal decompression surgery. This systematic review and meta-analysis aimed to compare the effects of early and late spinal decompression surgery on neurologic improvement and post-surgical complications in patients with traumatic spinal cord injuries.Methods: Two independent reviewers carried out an extended search in electronic databases. Data of neurological outcome and post-surgery complication were extracted. Finally, pooled relative risk (RR with a 95% confidence interval (CI was reported for comparing of efficacy of early and late surgical decompression.Results: Eventually 22 studies were included. The pooled RR was 0.77 (95% CI: 0.68-0.89 for at least one grade neurological improvement, and 0.84 (95% CI: 0.77-0.92 for at least two grade improvement. Pooled RR for surgical decompression performed within 12 hours after the injury was 0.26 (95% CI: 0.13-0.52; p<0.001, while it was 0.75 (95% CI: 0.63-0.90; p=0.002 when the procedure was performed within 24 hours, and 0.93 (95% CI: 0.76-1.14; p=0.48 when it was carried out in the first 72 hours after the injury. Surgical decompression performed within 24 hours after injury was found to be associated with significantly lower rates of post-surgical complications (RR=0.77; 95% CI: 0.68-0.86; p<0.001.Conclusion: The findings of this study indicate that early spinal decompression surgery can improve neurologic recovery and is associated with less post-surgical complications. The optimum efficacy is observed when the procedure is performed within 12 hours of the injury.

  3. DSP accelerator for the wavelet compression/decompression of high- resolution images

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, M.A.; Gleason, S.S.; Jatko, W.B.

    1993-07-23

    A Texas Instruments (TI) TMS320C30-based S-Bus digital signal processing (DSP) module was used to accelerate a wavelet-based compression and decompression algorithm applied to high-resolution fingerprint images. The law enforcement community, together with the National Institute of Standards and Technology (NISI), is adopting a standard based on the wavelet transform for the compression, transmission, and decompression of scanned fingerprint images. A two-dimensional wavelet transform of the input image is computed. Then spatial/frequency regions are automatically analyzed for information content and quantized for subsequent Huffman encoding. Compression ratios range from 10:1 to 30:1 while maintaining the level of image quality necessary for identification. Several prototype systems were developed using SUN SPARCstation 2 with a 1280 {times} 1024 8-bit display, 64-Mbyte random access memory (RAM), Tiber distributed data interface (FDDI), and Spirit-30 S-Bus DSP-accelerators from Sonitech. The final implementation of the DSP-accelerated algorithm performed the compression or decompression operation in 3.5 s per print. Further increases in system throughput were obtained by adding several DSP accelerators operating in parallel.

  4. Complicated Pseudomeningocele Repair After Chiari Decompression: Case Report and Review of the Literature.

    Science.gov (United States)

    De Tommasi, Claudio; Bond, Aaron E

    2016-04-01

    Pseudomeningocele is a recognised complication after posterior fossa decompression for Chiari malformation. Its management can be challenging and treatment options vary in literature. A difficult-to-treat case of a pseudomeningocele after posterior fossa decompression for a Chiari I malformation is presented. A 34-year-old woman underwent an initial decompression followed by multiple revision surgeries after the development of a symptomatic pseudomeningocele and a low-grade infection. Complications associated with standard treatment modalities, including lumbar drainage and dural repair, are discussed. A review of the existing literature is presented. The reported case ultimately required complete removal of all dural repair materials to eliminate the patient's low-grade infection, a muscular flap, and placement of a ventricular-peritoneal shunt for definitive treatment after a trial of a lumbar drain led to herniation and development of a syrinx. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. Propranolol Effects on Decompression Sickness in a Simulated DISSUB Rescue in Swine.

    Science.gov (United States)

    Forbes, Angela S; Regis, David P; Hall, Aaron A; Mahon, Richard T; Cronin, William A

    2017-04-01

    Disabled submarine (DISSUB) survivors may face elevated CO2 levels and inert gas saturation, putting them at risk for CO2 toxicity and decompression sickness (DCS). Propranolol was shown to reduce CO2 production in an experimental DISSUB model in humans but its effects on DCS in a DISSUB rescue scenario are unknown. A 100% oxygen prebreathe (OPB) reduces DCS incidence and severity and is incorporated into some DISSUB rescue protocols. We used a swine model of DISSUB rescue to study the effect of propranolol on DCS incidence and mortality with and without an OPB. In Experiment 1, male Yorkshire Swine (70 kg) were pressurized to 2.8 ATA for 22 h. Propranolol 1.0 mg · kg-1 (IV) was administered at 21.25 h. At 22 h, the animal was rapidly decompressed and observed for DCS type, onset time, and mortality. Experimental animals (N = 21; 69 ± 4.1 kg), PROP1.0, were compared to PROP1.0-OPB45 (N = 8; 69 ± 2.8 kg) with the same dive profile, except for a 45 min OPB prior to decompression. In Experiment 2, the same methodology was used with the following changes: swine pressurized to 2.8 ATA for 28 h; experimental group (N = 25; 67 ± 3.3 kg), PROP0.5 bis, propranolol 0.5 mg · kg-1 bis (twice) (IV) was administered at 22 h and 26 h. Control animals (N = 25; 67 ± 3.9 kg) received normal saline. OPB reduced mortality in PROP1.0-OBP45 compared to PROP1.0 (0% vs. 71%). PROP0.5 bis had increased mortality compared to CONTROL (60-% vs. 4%). Administration of beta blockers prior to saturation decompression appears to increase DCS and worsen mortality in a swine model; however, their effects in bounce diving remain unknown.Forbes AS, Regis DP, HallAA, Mahon RT, Cronin WA. Propranolol effects on decompression sickness in a simulated DISSUB rescue in swine. Aerosp Med Hum Perform. 2017; 88(4):385-391.

  6. ORACLE Stroke Study: Opinion Regarding Acceptable Outcome Following Decompressive Hemicraniectomy for Ischemic Stroke.

    Science.gov (United States)

    Honeybul, Stephen; Ho, Kwok M; Blacker, David W

    2016-08-01

    There continues to be considerable interest in the use of decompressive hemicraniectomy in the management of malignant cerebral artery infarction; however, concerns remain about long-term outcome. To assess opinion on consent and acceptable outcome among a wide range of healthcare workers. Seven hundred seventy-three healthcare workers at the 2 major public neurosurgical centers in Western Australia participated. Participants were asked to record their opinion on consent and acceptable outcome based on the modified Rankin Score (mRS). The evidence for clinical efficacy of the procedure was presented, and participants were then asked to reconsider their initial responses. Of the 773 participants included in the study, 407 (52.7%) initially felt that they would provide consent for a decompressive craniectomy as a lifesaving procedure, but only a minority of them considered an mRS score of 4 or 5 an acceptable outcome (for mRS score ≤4, n = 67, 8.7%; for mRS score = 4, n = 57, 7.4%). After the introduction of the concept of the disability paradox and the evidence for the clinical efficacy of decompressive craniectomy, more participants were unwilling to accept decompressive craniectomy (18.1% vs 37.8%), but at the same time, more were willing to accept an mRS score ≤4 as an acceptable outcome (for mRS score ≤4, n = 92, 11.9%; for mRS score = 4, n = 79, 10.2%). Most participants felt survival with dependency to be unacceptable. However, many would be willing to provide consent for surgery in the hopes that they may survive with some degree of independence. DESTINY, Decompressive Surgery for the Treatment of Malignant Infarction of the Middle Cerebral ArterymRS, modified Rankin Scale.

  7. The effects of venting and decompression on Yellow Tang (Zebrasoma flavescens in the marine ornamental aquarium fish trade

    Directory of Open Access Journals (Sweden)

    Emily S. Munday

    2015-02-01

    Full Text Available Each year, over 45 countries export 30 million fish from coral reefs as part of the global marine ornamental aquarium trade. This catch volume is partly influenced by collection methods that cause mortality. Barotrauma in fish resulting from forced ascent from depth can contribute to post-collection mortality. However, implementing decompression stops during ascent can prevent barotrauma. Conversely, venting (puncturing the swim bladder to release expanded internal gas following ascent can mitigate some signs of barotrauma like positive buoyancy. Here, we evaluate how decompression and venting affect stress and mortality in the Yellow Tang (Zebrasoma flavescens. We examined the effects of three ascent treatments, each with decompression stops of varying frequency and duration, coupled with or without venting, on sublethal effects and mortality using histology and serum cortisol measurements. In fish subjected to ascent without decompression stops or venting, a mean post-collection mortality of 6.2% occurred within 24 h of capture. Common collection methods in the fishery, ascent without decompression stops coupled with venting, or one long decompression stop coupled with venting, resulted in no mortality. Histopathologic examination of heart, liver, head kidney, and swim bladder tissues in fish 0d and 21d post-collection revealed no significant barotrauma- or venting-related lesions in any treatment group. Ascent without decompression stops resulted in significantly higher serum cortisol than ascent with many stops, while venting alone did not affect cortisol. Future work should examine links in the supply chain following collection to determine if further handling and transport stressors affect survivorship and sublethal effects.

  8. Petrological Geodynamics of Mantle Melting II. AlphaMELTS + Multiphase Flow: Dynamic Fractional Melting

    Science.gov (United States)

    Tirone, Massimiliano

    2018-03-01

    In this second installment of a series that aims to investigate the dynamic interaction between the composition and abundance of the solid mantle and its melt products, the classic interpretation of fractional melting is extended to account for the dynamic nature of the process. A multiphase numerical flow model is coupled with the program AlphaMELTS, which provides at the moment possibly the most accurate petrological description of melting based on thermodynamic principles. The conceptual idea of this study is based on a description of the melting process taking place along a 1-D vertical ideal column where chemical equilibrium is assumed to apply in two local sub-systems separately on some spatial and temporal scale. The solid mantle belongs to a local sub-system (ss1) that does not interact chemically with the melt reservoir which forms a second sub-system (ss2). The local melt products are transferred in the melt sub-system ss2 where the melt phase eventually can also crystallize into a different solid assemblage and will evolve dynamically. The main difference with the usual interpretation of fractional melting is that melt is not arbitrarily and instantaneously extracted from the mantle, but instead remains a dynamic component of the model, hence the process is named dynamic fractional melting (DFM). Some of the conditions that may affect the DFM model are investigated in this study, in particular the effect of temperature, mantle velocity at the boundary of the mantle column. A comparison is made with the dynamic equilibrium melting (DEM) model discussed in the first installment. The implications of assuming passive flow or active flow are also considered to some extent. Complete data files of most of the DFM simulations, four animations and two new DEM simulations (passive/active flow) are available following the instructions in the supplementary material.

  9. Economic evaluation of decompressive craniectomy versus barbiturate coma for refractory intracranial hypertension following traumatic brain injury.

    Science.gov (United States)

    Alali, Aziz S; Naimark, David M J; Wilson, Jefferson R; Fowler, Robert A; Scales, Damon C; Golan, Eyal; Mainprize, Todd G; Ray, Joel G; Nathens, Avery B

    2014-10-01

    Decompressive craniectomy and barbiturate coma are often used as second-tier strategies when intracranial hypertension following severe traumatic brain injury is refractory to first-line treatments. Uncertainty surrounds the decision to choose either treatment option. We investigated which strategy is more economically attractive in this context. We performed a cost-utility analysis. A Markov Monte Carlo microsimulation model with a life-long time horizon was created to compare quality-adjusted survival and cost of the two treatment strategies, from the perspective of healthcare payer. Model parameters were estimated from the literature. Two-dimensional simulation was used to incorporate parameter uncertainty into the model. Value of information analysis was conducted to identify major drivers of decision uncertainty and focus future research. Trauma centers in the United States. Base case was a population of patients (mean age = 25 yr) who developed refractory intracranial hypertension following traumatic brain injury. We compared two treatment strategies: decompressive craniectomy and barbiturate coma. Decompressive craniectomy was associated with an average gain of 1.5 quality-adjusted life years relative to barbiturate coma, with an incremental cost-effectiveness ratio of $9,565/quality-adjusted life year gained. Decompressive craniectomy resulted in a greater quality-adjusted life expectancy 86% of the time and was more cost-effective than barbiturate coma in 78% of cases if our willingness-to-pay threshold is $50,000/quality-adjusted life year and 82% of cases at a threshold of $100,000/quality-adjusted life year. At older age, decompressive craniectomy continued to increase survival but at higher cost (incremental cost-effectiveness ratio = $197,906/quality-adjusted life year at mean age = 85 yr). Based on available evidence, decompressive craniectomy for the treatment of refractory intracranial hypertension following traumatic brain injury provides better

  10. Decompression Device Using a Stainless Steel Tube and Wire for Treatment of Odontogenic Cystic Lesions: A Technical Report.

    Science.gov (United States)

    Jung, Eun-Joo; Baek, Jin-A; Leem, Dae-Ho

    2014-11-01

    Decompression is considered an effective treatment for odontogenic cystic lesions in the jaw. A variety of decompression devices are successfully used for the treatment of keratocystic odontogenic tumors, radicular cysts, dentigerous cysts, and ameloblastoma. The purpose of these devices is to keep an opening between the cystic lesion and the oral environment during treatment. The aim of this report is to describe an effective decompression tube using a stainless steel tube and wire for treatment of jaw cystic lesions.

  11. Transcranial doppler sonography in two patients who underwent decompressive craniectomy for traumatic brain swelling: report of two cases

    Directory of Open Access Journals (Sweden)

    Bor-Seng-Shu Edson

    2004-01-01

    Full Text Available The role of decompressive craniectomy in the treatment of severe posttraumatic cerebral swelling remains quite a controversial issue. To the best of our knowledge, there is no study demonstrating the effect of decompressive craniectomy on cerebral blood flow (CBF velocity by means of transcranial Doppler sonography (TCD. We present two patients who developed traumatic brain swelling and uncontrollable intracranial hypertension with coma and signs of transtentorial herniation. One patient underwent bifrontal, while the second, unilateral, frontotemporoparietal decompressive craniectomy with dural expansion. In both patients, TCD examinations were performed immediately before and after surgery to study the cerebral hemodynamic changes related to the operations. Pre and postoperative TCD examinations demonstrated a significant increase in blood flow velocity in the intracranial arteries in both subjects. In conclusion, our cases suggest that decompressive craniectomy with dural expansion may result in elevation of CBF velocity in patients with massive brain swelling. The increase in CBF velocity appears to occur not only in the decompressed hemisphere, but also on the opposite side.

  12. Interspinous Process Decompression: Expanding Treatment Options for Lumbar Spinal Stenosis

    Directory of Open Access Journals (Sweden)

    Pierce D. Nunley

    2016-01-01

    Full Text Available Interspinous process decompression is a minimally invasive implantation procedure employing a stand-alone interspinous spacer that functions as an extension blocker to prevent compression of neural elements without direct surgical removal of tissue adjacent to the nerves. The Superion® spacer is the only FDA approved stand-alone device available in the US. It is also the only spacer approved by the CMS to be implanted in an ambulatory surgery center. We computed the within-group effect sizes from the Superion IDE trial and compared them to results extrapolated from two randomized trials of decompressive laminectomy. For the ODI, effect sizes were all very large (>1.0 for Superion and laminectomy at 2, 3, and 4 years. For ZCQ, the 2-year Superion symptom severity (1.26 and physical function (1.29 domains were very large; laminectomy effect sizes were very large (1.07 for symptom severity and large for physical function (0.80. Current projections indicate a marked increase in the number of patients with spinal stenosis. Consequently, there remains a keen interest in minimally invasive treatment options that delay or obviate the need for invasive surgical procedures, such as decompressive laminectomy or fusion. Stand-alone interspinous spacers may fill a currently unmet treatment gap in the continuum of care and help to reduce the burden of this chronic degenerative condition on the health care system.

  13. Evaluation of Coflex interspinous stabilization following decompression compared with decompression and posterior lumbar interbody fusion for the treatment of lumbar degenerative disease: A minimum 5-year follow-up study.

    Science.gov (United States)

    Yuan, Wei; Su, Qing-Jun; Liu, Tie; Yang, Jin-Cai; Kang, Nan; Guan, Li; Hai, Yong

    2017-01-01

    Few studies have compared the clinical and radiological outcomes between Coflex interspinous stabilization and posterior lumbar interbody fusion (PLIF) for degenerative lumbar disease. We compared the at least 5-year clinical and radiological outcomes of Coflex stabilization and PLIF for lumbar degenerative disease. Eighty-seven consecutive patients with lumbar degenerative disease were retrospectively reviewed. Forty-two patients underwent decompression and Coflex interspinous stabilization (Coflex group), 45 patients underwent decompression and PLIF (PLIF group). Clinical and radiological outcomes were evaluated. Coflex subjects experienced less blood loss, shorter hospital stays and shorter operative time than PLIF (all pdisease was higher in the PLIF group, but this did not achieve statistical significance (11.1% vs. 4.8%, p=0.277). Both groups provided sustainable improved clinical outcomes for lumbar degenerative disease through at least 5-year follow-up. The Coflex group had significantly better early efficacy than the PLIF group. Coflex interspinous implantation after decompression is safe and effective for lumbar degenerative disease. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Early Autologous Cranioplasty after Decompressive Hemi-Craniectomy for Severe Traumatic Brain Injury

    International Nuclear Information System (INIS)

    Qasmi, S. A.; Ghaffar, A.; Hussain, Z.; Mushtaq, J.

    2015-01-01

    Objective: To evaluate the outcome of early replacement of autologous bone flap for decompressive hemicraniectomy in severe traumatic brain injury patients. Methods: The observational cross-sectional prospective study was conducted at the Neurosurgical Unit of the Combined Military Hospital, Rawalpindi, Pakistan, from July 2011, to June 2014, and comprised patients who underwent cranioplasty after decompressive hemicraniectomy for trauma. Patients over 20 years of age and of either gender were included. Cranioplasty was timed in all these patients using native bone flap preserved in the abdominal wall after decompressive craniectomy. Parameters recorded were mortality, wound infection, subdural collection, wound dehiscence, ventriculomegaly, bone resorption, cosmetic deformity and neurological outcome. SPSS 17 was used for data analysis. Results: Of the 30 patients in the study, 28(93.3 percent) were males. The overall mean age was age 32.03±8.01 years (range: 20-48 years). Mean cranioplasty time was 66.2±11.50 days (range: 44-89 days). Major infection necessitating bone flap removal was found in 1(3.33 percent) patient, while minor scalp wound infections, treated with antibiotics and dressings were found in 2(6.66 percent). Cosmetic18 deformity was seen in 3(10 percent). Improved neurological outcome was noted in 21(70 percent) patients; 6(20 percent) survived with a moderate to severe disability and 3(10 percent) remained in a vegetative state. No mortality was found after the procedure. Conclusion: Early autologous bone replacement for decompressive hemicraniectomy in severe traumatic brain injury patients offered cost-effective, acceptable surgical and improve dneurological outcome. (author)

  15. Influence of Lumbar Lordosis on the Outcome of Decompression Surgery for Lumbar Canal Stenosis.

    Science.gov (United States)

    Chang, Han Soo

    2018-01-01

    Although sagittal spinal balance plays an important role in spinal deformity surgery, its role in decompression surgery for lumbar canal stenosis is not well understood. To investigate the hypothesis that sagittal spinal balance also plays a role in decompression surgery for lumbar canal stenosis, a prospective cohort study analyzing the correlation between preoperative lumbar lordosis and outcome was performed. A cohort of 85 consecutive patients who underwent decompression for lumbar canal stenosis during the period 2007-2011 was analyzed. Standing lumbar x-rays and 36-item short form health survey questionnaires were obtained before and up to 2 years after surgery. Correlations between lumbar lordosis and 2 parameters of the 36-item short form health survey (average physical score and bodily pain score) were statistically analyzed using linear mixed effects models. There was a significant correlation between preoperative lumbar lordosis and the 2 outcome parameters at postoperative, 6-month, 1-year, and 2-year time points. A 10° increase of lumbar lordosis was associated with a 5-point improvement in average physical scores. This correlation was not present in preoperative scores. This study showed that preoperative lumbar lordosis significantly influences the outcome of decompression surgery on lumbar canal stenosis. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. SLAP repair with arthroscopic decompression of spinoglenoid cyst

    Directory of Open Access Journals (Sweden)

    Hashiguchi Hiroshi

    2016-01-01

    Full Text Available Introduction: A spinoglenoid cyst with suprascapular nerve disorders is highly associated with superior labrum anterior posterior (SLAP lesion. Conservative or surgical treatment is applied to relieve pain and neurological symptoms. The purpose of this study was to evaluate clinical outcomes of patients treated by arthroscopic surgery for SLAP lesion with a spinoglenoid cyst. Methods: The subjects of this study were six patients with SLAP lesion with a spinoglenoid cyst who underwent arthroscopic surgery. There was one female and five males with a mean age of 48.5 years. SLAP lesion was found in all the patients at arthroscopy. A small tear of the rotator cuff was found in the two patients. The SLAP lesion was repaired using suture anchors, and the rotator cuff tears were repaired by suture-bridge fixation. The spinoglenoid cyst was decompressed through the torn labrum in three patients, and through the released superior to posterior portion of the capsule in the other three patients. Results: All patients showed excellent improvement in pain and muscle strength at the final follow-up examination. The mean Constant score was improved from 60.5 points preoperatively to 97.2 points postoperatively. The mean visual analog scale (VAS score decreased from 4.5 on the day of the surgery to 2.5 within one week postoperatively. Postoperative MRI showed disappearance or reduction of the spinoglenoid cyst in four and two patients, respectively. There were no complications from the surgical intervention and in the postoperative period. Discussion: The patients treated by decompression through the released capsule obtained pain relief at an early period after the surgery. Arthroscopic treatment for a spinoglenoid cyst can provide a satisfactory clinical outcome. Arthroscopic decompression of a spinoglenoid cyst through the released capsule is recommended for a safe and reliable procedure for patients with suprascapular nerve disorders.

  17. Posterior Fossa Decompression with Duraplasty in Chiari-1 Malformations

    International Nuclear Information System (INIS)

    Rehman, L.; Akbar, H.; Bokhari, I.; Babar, A. K.; Hahim, A. S. M.; Arain, S. H.

    2015-01-01

    Objective: To evaluate the symptomatic outcome after PFD (Posterior Fossa Decompression) with duraplasty in Chiari-1 malformations. Study Design: Case series. Place and Duration of Study: Department of Neurosurgery, JPMC, Karachi, from July 2008 to September 2012. Methodology: This included 21 patients of Chiari 1 malformations admitted in department through OPD with clinical features of headache, neck pain, numbness, neurological deficit, and syringomyelia. Diagnosis was confirmed by MRI. PFD followed by C1 laminectomy with duraplasty was done in all cases and symptomatic outcome was assessed in follow-up clinic. Results: Among 21 patients, 13 were females and 8 were males. Age ranged from 18 to 40 years. All the patients had neck pain and numbness in hands. Only 3 patients had weakness of all four limbs and 12 with weakness of hands. Symptoms evolved over a mean of 12 months. Syringomyelia was present in all cases. All patients underwent posterior fossa decompression with duraplasty with an additional C1 laminectomy and in 2 cases C2 laminectomy was done. Syringo-subarachnoid shunt was placed in one patient and ventriculo-peritoneal shunt was placed in 2 patients. Pain was relieved in all cases. Weakness was improved in all cases and numbness was improved in 19 cases. Syringomyelia was improved in all cases. Postoperative complications included CSF leak in 2 patients and wound infection in one patient. However, there was no mortality. Conclusion: Posterior fossa decompression with duraplasty is the best treatment option for Chiari-1 malformations because of symptomatic improvement and less chances of complications. (author)

  18. Human Decompression Trial With 1.3 ATA Oxygen in Helium

    National Research Council Canada - National Science Library

    1998-01-01

    The Naval Medical Research Institute (NMRI) was tasked to develop helium-oxygen decompression tables for a proposed closed circuit breathing apparatus which Will deliver a constant oxygen partial pressure of 1.3 atmospheres (ATA...

  19. Avascular bone necrosis: MR imaging findings before and after core decompression

    International Nuclear Information System (INIS)

    Adam, G.; Keulers, P.; Forst, J.; Neuerburg, J.; Kilbinger, M.; Guenther, R.W.

    1995-01-01

    17 patients with avascular epiphyseal necrosis were examined by MRI using T 1 -weighted spin echo sequences before and after gadopentetate dimeglumine application, T 2 -weighted spin echo sequences and in some patients with fat-saturated 2D gradient echo sequences up to 22 months after core decompression. All patients but one recovered from symptoms after core decompression. Although the signal morphology of the necrotic area remained unchanged in the majority of the cases, a decrease of the joint effusion was observed as well as an ongoing signal increase after gadopentetate dimeglumine application. The last examinations displayed similar signal characteristics as on the preoperative scans; however, a reduction of the necrotic zone became evident. (orig./MG) [de

  20. GLASS MELTING PHENOMENA, THEIR ORDERING AND MELTING SPACE UTILISATION

    Directory of Open Access Journals (Sweden)

    Němec L.

    2013-12-01

    Full Text Available Four aspects of effective glass melting have been defined – namely the fast kinetics of partial melting phenomena, a consideration of the melting phenomena ordering, high utilisation of the melting space, and effective utilisation of the supplied energy. The relations were defined for the specific melting performance and specific energy consumption of the glass melting process which involve the four mentioned aspects of the process and indicate the potentials of effective melting. The quantity “space utilisation” has been treated in more detail as an aspect not considered in practice till this time. The space utilisation was quantitatively defined and its values have been determined for the industrial melting facility by mathematical modelling. The definitions of the specific melting performance and specific energy consumption have been used for assessment of the potential impact of a controlled melt flow and high space utilisation on the melting process efficiency on the industrial scale. The results have shown that even the partial control of the melt flow, leading to the partial increase of the space utilisation, may considerably increase the melting performance, whereas a decrease of the specific energy consumption was determined to be between 10 - 15 %.

  1. Assessment of two methods of gastric decompression for the initial management of gastric dilatation-volvulus.

    Science.gov (United States)

    Goodrich, Z J; Powell, L L; Hulting, K J

    2013-02-01

    To assess gastric trocarization and orogastric tubing as a means of gastric decompression for the initial management of gastric dilatation-volvulus. Retrospective review of 116 gastric dilatation-volvulus cases from June 2001 to October 2009. Decompression was performed via orogastric tubing in 31 dogs, gastric trocarization in 39 dogs and a combination of both in 46 dogs. Tubing was successful in 59 (75·5%) dogs and unsuccessful in 18 (23·4%) dogs. Trocarization was successful in 73 (86%) dogs and unsuccessful in 12 (14%) dogs. No evidence of gastric perforation was noted at surgery in dogs undergoing either technique. One dog that underwent trocarization had a splenic laceration identified at surgery that did not require treatment. Oesophageal rupture or aspiration pneumonia was not identified in any dog during hospitalization. No statistical difference was found between the method of gastric decompression and gastric compromise requiring surgical intervention or survival to discharge. Orogastric tubing and gastric trocarization are associated with low complication and high success rates. Either technique is an acceptable method for gastric decompression in dogs with gastric dilatation-volvulus. © 2013 British Small Animal Veterinary Association.

  2. Nonaffine deformation under compression and decompression of a flow-stabilized solid

    Science.gov (United States)

    Ortiz, Carlos P.; Riehn, Robert; Daniels, Karen E.

    2016-08-01

    Understanding the particle-scale transition from elastic deformation to plastic flow is central to making predictions about the bulk material properties and response of disordered materials. To address this issue, we perform experiments on flow-stabilized solids composed of micron-scale spheres within a microfluidic channel, in a regime where particle inertia is negligible. Each solid heap exists within a stress field imposed by the flow, and we track the positions of particles in response to single impulses of fluid-driven compression or decompression. We find that the resulting deformation field is well-decomposed into an affine field, with a constant strain profile throughout the solid, and a non-affine field. The magnitude of this non-affine response decays with the distance from the free surface in the long-time limit, suggesting that the distance from jamming plays a significant role in controlling the length scale of plastic flow. Finally, we observe that compressive pulses create more rearrangements than decompressive pulses, an effect that we quantify using the D\\text{min}2 statistic for non-affine motion. Unexpectedly, the time scale for the compression response is shorter than for decompression at the same strain (but unequal pressure), providing insight into the coupling between deformation and cage-breaking.

  3. A comparative study of the intracranial environment before and after cranioplasty in decompressive craniectamized cases

    International Nuclear Information System (INIS)

    Utsugi, Osamu; Saito, Fumio; Inaba, Izumi; Takeda, Yasuaki; Miki, Tamotsu; Miwa, Tetsurou

    1990-01-01

    The external decompression is performed as a secondary method for the surgical treatment of increased intracranial pressure due to trauma or cerebrovascular disease. We have had the experience that, if patients are kept in a decompressed state for a prolonged period, they often complain of various minor neurological disorders; cranioplasty done on such patients improves those disorders. In this investigation, the authors made a plan to elucidate this mechanism. The subjects were 30 cases of non-progressive diseases, such as postoperative lesions of ruptured aneurysms, and intracerebral hematomas. We proved that the cerebral function improves after the cranioplasty by an average score of 5.7 on Hasegawa's simple intelligent evaluation scale and by 88.9% in EEG. The morphological change was observed by a CT scan, which showed as a compressive deformity of the lateral ventricle, subdural fluid collection, and a prolonged residue of brain edema. These findings were rapidly and greatly improved after the cranioplasty. It was also found, by the measurement of the regional cerebral blood flow by means of SPECT, that the hemicerebral blood flow rate on the side of the decompressive craniectomy was significantly improved after the cranioplasty compared with the control group. From the above data, it was presumed that the persistence of neurological disorders in decompressive craniectomy is caused largely by a regional cerebral blood flow disorder. Therefore, the authors considered that, when external decompression is done, it is essential to perform cranioplasty as soon as possible after the intracranial pressure has been relieved. (author)

  4. Alternative technique in atypical spinal decompression: the use of the ultrasonic scalpel in paediatric achondroplasia

    Science.gov (United States)

    Woodacre, Timothy; Sewell, Matthew; Clarke, Andrew J; Hutton, Mike

    2016-01-01

    Spinal stenosis can be a very disabling condition. Surgical decompression carries a risk of dural tear and neural injury, which is increased in patients with severe stenosis or an atypical anatomy. We present an unusual case of symptomatic stenosis secondary to achondroplasia presenting in a paediatric patient, and highlight a new surgical technique used to minimise the risk of dural and neural injury during decompression. PMID:27288205

  5. [Developing and testing of decompression regimes for caisson operations while constructing Moscow metro].

    Science.gov (United States)

    Rodchenkov, S V; Syrovegin, A V; Shulagin, I A

    1996-01-01

    Decompression regimes for caisson operations at the pressures up to 5 ata exceeding duration of the regimes specified in the caisson regulations have been developed. The regimes were tested and validated in dry altitude chamber with participation of exercising human subjects. Seventeen test-subjects took part in 54 tests. No symptoms of decompression sickness were documented. Air embolism was observed in 28 +/- 6% of cases at rest and in 72 +/- 6% of cases following provocative leg movements. The air embolism expression tended to increase with exposure to pressure.

  6. Rb-Sr and Sm-Nd isotopic relations and ages of the Brasiliano granitic magmatism of the eastern region of the Dom Feliciano belt in the Rio Grande do Sul State, South region Brazil: evidences of the reworking of a paleoproterozoic continental crust, South region, Brazil

    International Nuclear Information System (INIS)

    Frantz, Jose Carlos; Koester, Edinei; Teixeira, Roberto Santos; Botelho, Nilson Francisquini; Pimentel, Marcio Martins; Potrel, Alan

    1999-01-01

    The granitoids belonging to the brasiliano cycle from the eastern region at the Dom Feliciano Belt in the Rio Grande do Sul state have had Rb-Sr data that indicated bodies which were intruded between 800 and 585 Ma. The T DM ages are suggesting the participation of an older source in their generation. This source could be represented by a long period enriched mantle, much than would be expected during the evolution of the magmatic arcs, or could be represented by the interaction between an older continental crust and mantle during a continental collision regime. The tectonic evolution of this area., the existence of a long period of time between the granitic intrusions associated to the tangential regime and to the transpressive regime and to the transpressive regime ones, the isotopic relations between Sr and nd and the very low negative values of ε N dt are suggesting a strong participation of an older continental crust. This older continental crust, may be constituted by gneissic protoliths of paleoproterozoic ages and generated during the evolution of the Transamazonic Cycle, has participated in the formation of the sources of the granitic magmatism of this part of the belt. The variations of the T DM ages and of the Nd ratios in the calc-alkaline granitoids are suggesting different proportions of mixture between and older continental crust and mantle or different homogenization grades in the magmas sources. For the peraluminous granites, that have be resulted from continental crustal melt, there are indications of different sources to the different bodies. (author)

  7. Osteonecrosis of femoral head: Treatment by core decompression and vascular pedicle grafting

    Directory of Open Access Journals (Sweden)

    Babhulkar Sudhir

    2009-01-01

    Full Text Available Background: Femoral head-preserving core decompression and bone grafting have shown excellent result in preventing collapse. The use of vascularized grafts have shown better clinical results. The vascular pedicle bone graft is an easy to perform operation and does not require special equipment. We analyzed and report a series of patients of osteonecrosis of femoral head treated by core decompression and vascular pedicle grafting of part of iliac crest based on deep circumflex iliac vessels. Materials and Methods: The article comprises of the retrospective study of 31 patients of osteonecrosis of femoral head in stage II and III treated with core decompression and vascular pedicle grafting by using part of iliac crest with deep circumflex iliac vessels from January 1990 to December 2005. The young patients with a mean age 32 years (18-52 years with a minimum follow-up of five years were included for analysis. Sixteen patients had osteonecrosis following alcohol abuse, 12 patients following corticosteroid consumption, 3 patients had idiopathic osteonecrosis. Nine patients were stage IIB, and 22 patients were stage IIIC according to ARCO′s system. The core decompression and vascular pedicle grafting was performed by anterior approach by using part of iliac crest with deep circumflex iliac vessels. Results: Digital subtraction arteriography performed in 9 patients at the end of 12 weeks showed the patency of deep circumflex artery in all cases, and bone scan performed in 6 other patients showed high uptake in the grafted area of the femoral head proving the efficacy of the operative procedure. Out of 31 patients, only one patient progressed to collapse and total joint replacement was advised. At the final follow up period of 5-8 years, Harris Hip Score improved mean ± SD of 28.2 ± 6.4 ( p < 0.05. Forty-eight percent of patients had an improvement in Harris Hip Score of more that 28 points. Conclusion: The core decompression and vascular pedicle

  8. Petrological Geodynamics of Mantle Melting I. AlphaMELTS + Multiphase Flow: Dynamic Equilibrium Melting, Method and Results

    Directory of Open Access Journals (Sweden)

    Massimiliano Tirone

    2017-10-01

    Full Text Available The complex process of melting in the Earth's interior is studied by combining a multiphase numerical flow model with the program AlphaMELTS which provides a petrological description based on thermodynamic principles. The objective is to address the fundamental question of the effect of the mantle and melt dynamics on the composition and abundance of the melt and the residual solid. The conceptual idea is based on a 1-D description of the melting process that develops along an ideal vertical column where local chemical equilibrium is assumed to apply at some level in space and time. By coupling together the transport model and the chemical thermodynamic model, the evolution of the melting process can be described in terms of melt distribution, temperature, pressure and solid and melt velocities but also variation of melt and residual solid composition and mineralogical abundance at any depth over time. In this first installment of a series of three contributions, a two-phase flow model (melt and solid assemblage is developed under the assumption of complete local equilibrium between melt and a peridotitic mantle (dynamic equilibrium melting, DEM. The solid mantle is also assumed to be completely dry. The present study addresses some but not all the potential factors affecting the melting process. The influence of permeability and viscosity of the solid matrix are considered in some detail. The essential features of the dynamic model and how it is interfaced with AlphaMELTS are clearly outlined. A detailed and explicit description of the numerical procedure should make this type of numerical models less obscure. The general observation that can be made from the outcome of several simulations carried out for this work is that the melt composition varies with depth, however the melt abundance not necessarily always increases moving upwards. When a quasi-steady state condition is achieved, that is when melt abundance does not varies significantly

  9. Facial nerve decompression surgery using bFGF-impregnated biodegradable gelatin hydrogel in patients with Bell palsy.

    Science.gov (United States)

    Hato, Naohito; Nota, Jumpei; Komobuchi, Hayato; Teraoka, Masato; Yamada, Hiroyuki; Gyo, Kiyofumi; Yanagihara, Naoaki; Tabata, Yasuhiko

    2012-04-01

    Basic fibroblast growth factor (bFGF) promotes the regeneration of denervated nerves. The aim of this study was to evaluate the regeneration-facilitating effects of novel facial nerve decompression surgery using bFGF in a gelatin hydrogel in patients with severe Bell palsy. Prospective clinical study. Tertiary referral center. Twenty patients with Bell palsy after more than 2 weeks following the onset of severe paralysis were treated with the new procedure. The facial nerve was decompressed between tympanic and mastoid segments via the mastoid. A bFGF-impregnated biodegradable gelatin hydrogel was placed around the exposed nerve. Regeneration of the facial nerve was evaluated by the House-Brackmann (H-B) grading system. The outcomes were compared with the authors' previous study, which reported outcomes of the patients who underwent conventional decompression surgery (n = 58) or conservative treatment (n = 43). The complete recovery (H-B grade 1) rate of the novel surgery (75.0%) was significantly better than the rate of conventional surgery (44.8%) and conservative treatment (23.3%). Every patient in the novel decompression surgery group improved to H-B grade 2 or better even when undergone between 31 and 99 days after onset. Advantages of this decompression surgery are low risk of complications and long effective period after onset of the paralysis. To the authors' knowledge, this is the first clinical report of the efficacy of bFGF using a new drug delivery system in patients with severe Bell palsy.

  10. Natural gas decompression energy recovery: Energy savings potential in Italy

    International Nuclear Information System (INIS)

    Piatti, A.; Piemonte, C.; Rampini, E.; Vatrano, F.; Techint SpA, Milan; ENEA, Rome

    1992-01-01

    This paper surveyed the natural gas distribution systems employed in the Italian civil, industrial and thermoelectric sectors to identify those installations which can make use of gas decompression energy recovery systems (consisting of turbo-expanders or alternative expanders) to economically generate electric power. Estimates were then made of the total amount of potential energy savings. The study considered as eligible for energy savings interventions only those plants with a greater than 5,000 standard cubic meter per hour plant capacity. It was evaluated that, with suitable decompression equipment installed at 50 key installations (33 civil, 15 industrial), about 200 GWh of power could be produced annually, representing potential savings of about 22,000 petroleum equivalent tonnes of energy. A comparative analysis was done on three investment alternatives involving inputs of varying amounts of Government financial assistance

  11. Continuous decompression of unicameral bone cyst with cannulated screws: a comparative study.

    Science.gov (United States)

    Brecelj, Janez; Suhodolcan, Lovro

    2007-09-01

    We determined the role of mechanical decompression in the resolution of unicameral bone cyst. A total of 69 children with unicameral bone cysts were treated either by (i) open curettage and bone grafting, (ii) steroid injection or (iii) cannulated screw insertion. During a mean follow-up of 69 months (range, 12-58), the cysts were evaluated by radiological criteria. The healing rates in the three groups were 25, 12 and 29% after the first treatment, and a further 50, 19 and 65% after the second. The study has demonstrated the advantages of the decompression technique for unicameral bone cysts over other treatment modalities studied.

  12. Piezosurgery for orbital decompression surgery in thyroid associated orbitopathy.

    Science.gov (United States)

    Ponto, Katharina A; Zwiener, Isabella; Al-Nawas, Bilal; Kahaly, George J; Otto, Anna F; Karbach, Julia; Pfeiffer, Norbert; Pitz, Susanne

    2014-12-01

    The purpose of this study was to assess a piezosurgical device as a novel tool for bony orbital decompression surgery. At a multidisciplinary orbital center, 62 surgeries were performed in 40 patients with thyroid associated orbitopathy (TAO). Within this retrospective case-series, we analyzed the medical records of these consecutive unselected patients. The reduction of proptosis was the main outcome measure. Indications for a two (n = 27, 44%) or three wall (35, 56%) decompression surgery were proptosis (n = 50 orbits, 81%) and optic neuropathy (n = 12, 19%). Piezosurgery enabled precise bone cuts without intraoperative complications. Proptosis decreased from 23.6 ± 2.8 mm (SD) by 3 mm (95% CI: -3.6 to -2.5 mm) after surgery and stayed stable at 3 months (-3 mm, 95% CI: -3.61 to -2.5 mm, p 24 mm versus ≤ 24 mm: -3.4 mm versus -2.81 mm before discharge from hospital and -4.1 mm versus -2.1 mm at 3 months: p < 0.001, respectively). After a mean long-term follow-up period of 14.6 ± 10.4 months proptosis decreased by further -0.7 ± 2.0 mm (p < 0.001). Signs of optic nerve compression improved after surgery. Infraorbital hypesthesia was present in 11 of 21 (52%) orbits 3 months after surgery. The piezosurgical device is a useful tool for orbital decompression surgery in TAO. By cutting bone selectively, it is precise and reduces the invasiveness of surgery. Nevertheless, no improvement in outcome or reduction in morbidity over conventional techniques has been shown so far. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  13. Percutaneous laser disc decompression versus conventional microdiscectomy for patients with sciatica: Two-year results of a randomised controlled trial.

    Science.gov (United States)

    Brouwer, Patrick A; Brand, Ronald; van den Akker-van Marle, M Elske; Jacobs, Wilco Ch; Schenk, Barry; van den Berg-Huijsmans, Annette A; Koes, Bart W; Arts, Mark A; van Buchem, M A; Peul, Wilco C

    2017-06-01

    Background Percutaneous laser disc decompression is a minimally invasive treatment, for lumbar disc herniation and might serve as an alternative to surgical management of sciatica. In a randomised trial with two-year follow-up we assessed the clinical effectiveness of percutaneous laser disc decompression compared to conventional surgery. Materials and methods This multicentre randomised prospective trial with a non-inferiority design, was carried out according to an intent-to-treat protocol with full institutional review board approval. One hundred and fifteen eligible surgical candidates, with sciatica from a disc herniation smaller than one-third of the spinal canal, were randomly allocated to percutaneous laser disc decompression ( n = 55) or conventional surgery ( n = 57). The main outcome measures for this trial were the Roland-Morris Disability Questionnaire for sciatica, visual analogue scores for back and leg pain and the patient's report of perceived recovery. Results The primary outcome measures showed no significant difference or clinically relevant difference between the two groups at two-year follow-up. The re-operation rate was 21% in the surgery group, which is relatively high, and with an even higher 52% in the percutaneous laser disc decompression group. Conclusion At two-year follow-up, a strategy of percutaneous laser disc decompression, followed by surgery if needed, resulted in non-inferior outcomes compared to a strategy of microdiscectomy. Although the rate of reoperation in the percutaneous laser disc decompression group was higher than expected, surgery could be avoided in 48% of those patients that were originally candidates for surgery. Percutaneous laser disc decompression, as a non-surgical method, could have a place in the treatment arsenal of sciatica caused by contained herniated discs.

  14. Endoscopic foraminal decompression for failed back surgery syndrome under local anesthesia.

    Science.gov (United States)

    Yeung, Anthony; Gore, Satishchandra

    2014-01-01

    The most common causes of failed back surgery are residual or recurrent herniation, foraminal fibrosis and foraminal stenosis that is ignored, untreated, or undertreated. Residual back ache may also be from facetal causes or denervation and scarring of the paraspinal muscles.(1-6) The original surgeon may advise his patient that nothing more can be done on the basis of his opinion that the nerve was visually decompressed by the original surgery, supported by improved post-op imaging and follow-up studies such as EMG and conduction velocity studies. Post-op imaging or electrophysiological assessment may be inadequate to explain all the reasons for residual or recurrent symptoms. Treatment of Failed back surgery by repeat traditional open revision surgery usually incorporates more extensive decompression causing increased instability and back pain, therefore necessitating fusion. The authors, having limited their practice to endoscopic MIS surgery over the last 15-20 years, report on their experience gained during that period to relieve pain by endoscopically visualizing and treating unrecognized causative patho-anatomy in FBSS.(7.) Thirty consecutive patients with FBSS presenting with back and leg pain that had supporting imaging diagnosis of lateral stenosis and /or residual / recurrent disc herniation, or whose pain complaint was supported by relief from diagnostic and therapeutic injections (Figure 1), were offered percutaneous transforaminal endoscopic discectomy and foraminoplasty over a repeat open procedure. Each patient sought consultation following a transient successful, partially successful or unsuccessful open translaminar surgical treatment for disc herniation or spinal stenosis. Endoscopic foraminoplasty was also performed to either decompress the bony foramen for foraminal stenosis, or foraminoplasty to allow for endoscopic visual examination of the affected traversing and exiting nerve roots in the axilla, also known as the "hidden zone" of Macnab

  15. Severe capillary leak syndrome after inner ear decompression sickness in a recreational scuba diver.

    Science.gov (United States)

    Gempp, Emmanuel; Lacroix, Guillaume; Cournac, Jean-Marie; Louge, Pierre

    2013-07-01

    Post-decompression shock with plasma volume deficit is a very rare event that has been observed under extreme conditions of hypobaric and hyperbaric exposure in aviators and professional divers. We report a case of severe hypovolemic shock due to extravasation of plasma in a recreational scuba diver presenting with inner ear decompression sickness. Impaired endothelial function can lead to capillary leak with hemoconcentration and hypotension in severe cases. This report suggests that decompression-induced circulating bubbles may have triggered the endothelial damage, activating the classic inflammatory pathway of increased vascular permeability. This observation highlights the need for an accurate diagnosis of this potentially life-threatening condition at the initial presentation in the Emergency Department after a diving-related injury. An elevated hematocrit in a diver should raise the suspicion for the potential development of capillary leak syndrome requiring specific treatment using albumin infusion as primary fluid replacement. Copyright © 2013 Elsevier Inc. All rights reserved.

  16. Risk of Decompression Sickness in Shallow No-Stop Air Diving An Analysis of Naval Safety Center Data 1990-1994

    National Research Council Canada - National Science Library

    Flynn, E

    1998-01-01

    ...) in shallow no-stop air diving using current U.S. Navy no-decompression limits (USN57). Navy and Marine Corp divers performed 163,400 no-decompression dives between 21 and 55 feet of sea water (fsw...

  17. Resolution of extra-axial collections after decompressive craniectomy for ischemic stroke.

    Science.gov (United States)

    Ropper, Alexander E; Nalbach, Stephen V; Lin, Ning; Dunn, Ian F; Gormley, William B

    2012-02-01

    Extra-axial fluid collections are known consequences of decompressive hemicraniectomy. Studies have examined these collections and their management. We retrospectively reviewed 12 consecutive patients who underwent decompressive hemicraniectomy for the treatment of malignant cerebral edema after infarction and evaluated the evolution, resolution and treatment of post-operative extra-axial fluid collections. All patients underwent standard-sized frontotemporoparietal hemicraniectomy with duraplasty as treatment for medically intractable malignant cerebral edema at an average of 3 days after the stroke (median 2 days). Their 30-day mortality was 25%. Three patients developed some extra-axial fluid collections after craniectomy: two patients developed the collections early in their post-operative course, 3 days and 5 days after the craniectomy. Both experienced spontaneous resolution of the collections without corrective cranioplasty or shunt placement at 34 days and 58 days after surgery. The third patient developed a collection 55 days after the operation related to a subgaleal bacterial infection. In the final analysis, 18% of patients developed extra-axial collections and all resolved spontaneously. The incidence of extra-axial collections after decompressive hemicraniectomy following ischemic stroke was lower in our retrospective series than has been reported by others. The collections resolved spontaneously, suggesting that early anticipatory, corrective treatment with cerebrospinal fluid diversion or cranioplasty may not be warranted. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. Cutis marmorata in decompression illness may be cerebrally mediated: a novel hypothesis on the aetiology of cutis marmorata

    NARCIS (Netherlands)

    Kemper, Tom Cpm; Rienks, R.; van Ooij, P. Jam; van Hulst, R. A.

    2015-01-01

    Cutaneous decompression sickness (DCS) is often considered to be a mild entity that may be explained by either vascular occlusion of skin vessels by bubbles entering the arterial circulation through a right-to-left shunt or bubble formation due to saturated subcutaneous tissue during decompression.

  19. Women's experiences of daily life after anterior cervical decompression and fusion surgery: A qualitative interview study.

    Science.gov (United States)

    Hermansen, Anna; Peolsson, Anneli; Kammerlind, Ann-Sofi; Hjelm, Katarina

    2016-04-01

    To explore and describe women's experiences of daily life after anterior cervical decompression and fusion surgery. Qualitative explorative design. Fourteen women aged 39-62 years (median 52 years) were included 1.5-3 years after anterior cervical decompression and fusion for cervical disc disease. Individual semi-structured interviews were analysed by qualitative content analysis with an inductive approach. The women described their experiences of daily life in 5 different ways: being recovered to various extents; impact of remaining symptoms on thoughts and feelings; making daily life work; receiving support from social and occupational networks; and physical and behavioural changes due to interventions and encounters with healthcare professionals. This interview study provides insight into women's daily life after anterior cervical decompression and fusion. Whilst the subjects improved after surgery, they also experienced remaining symptoms and limitations in daily life. A variety of mostly active coping strategies were used to manage daily life. Social support from family, friends, occupational networks and healthcare professionals positively influenced daily life. These findings provide knowledge about aspects of daily life that should be considered in individualized postoperative care and rehabilitation in an attempt to provide better outcomes in women after anterior cervical decompression and fusion.

  20. Emerging melt quality control solution technologies for aluminium melt

    Directory of Open Access Journals (Sweden)

    Arturo Pascual, Jr

    2009-11-01

    Full Text Available The newly developed “MTS 1500” Melt Treatment System is performing the specifi cally required melt treatment operations like degassing, cleaning, modification and/or grain refinement by an automated process in one step and at the same location. This linked process is saving time, energy and metal losses allowing - by automated dosage of the melt treatment agents - the production of a consistent melt quality batch after batch. By linking the MTS Metal Treatment System with sensors operating on-line in the melt, i.e., with a hydrogen sensor “Alspek H”, a fully automated control of parts of the process chain like degassing is possible. This technology does guarantee a pre-specifi ed and documented melt quality in each melt treatment batch. Furthermore, to ensure that castings are consistent and predictable there is a growing realization that critical parameters such as metal cleanliness must be measured prior to casting. There exists accepted methods for measuring the cleanliness of an aluminum melt but these can be both slow and costly. A simple, rapid and meaningful method of measuring and bench marking the cleanliness of an aluminum melt has been developed to offer the foundry a practical method of measuring melt cleanliness. This paper shows the structure and performance of the integrated MTS melt treatment process and documents achieved melt quality standards after degassing, cleaning, modifi cation and grain refi nement operations under real foundry conditions. It also provides an insight on a melt cleanliness measuring device “Alspek MQ” to provide foundry men better tools in meeting the increasing quality and tighter specifi cation demand from the industry.

  1. Non-surgical spinal decompression therapy: does the scientific literature support efficacy claims made in the advertising media?

    Directory of Open Access Journals (Sweden)

    Daniel Dwain M

    2007-05-01

    Full Text Available Abstract Background Traction therapy has been utilized in the treatment of low back pain for decades. The most recent incarnation of traction therapy is non-surgical spinal decompression therapy which can cost over $100,000. This form of therapy has been heavily marketed to manual therapy professions and subsequently to the consumer. The purpose of this paper is to initiate a debate pertaining to the relationship between marketing claims and the scientific literature on non-surgical spinal decompression. Discussion Only one small randomized controlled trial and several lower level efficacy studies have been performed on spinal decompression therapy. In general the quality of these studies is questionable. Many of the studies were performed using the VAX-D® unit which places the patient in a prone position. Often companies utilize this research for their marketing although their units place the patient in the supine position. Summary Only limited evidence is available to warrant the routine use of non-surgical spinal decompression, particularly when many other well investigated, less expensive alternatives are available.

  2. Successful Treatment of Early Talar Osteonecrosis by Core Decompression Combined with Intraosseous Stem Cell Injection: A Case Report.

    Science.gov (United States)

    Nevalainen, Mika T; Repo, Jussi P; Pesola, Maija; Nyrhinen, Jukka P

    2018-01-01

    Osteonecrosis of the talus is a fairly rare condition. Many predisposing factors have been identified including previous trauma, use of corticosteroids, alcoholism, and smoking. As a gold standard, magnetic resonance imaging (MRI) is the most sensitive and specific diagnostic examination to detect osteonecrosis. While many treatment options for talar osteonecrosis exist, core decompression is suggested on young patients with good outcome results. More recently, intraosseous stem cell and platelet-rich plasma (PRP) injection has been added to the core decompression procedure. We report a successful treatment of early talar osteonecrosis ARCO I (Association Research Circulation Osseous) by core decompression combined with stem cell and PRP injection. On 3-month and 15-month follow-up, MRI showed complete resolution of the osteonecrotic changes together with clinical improvement. This modified technique is a viable treatment option for early talar osteonecrosis. Nevertheless, future prospects should include a study comparing this combined technique with plain core decompression.

  3. MR imaging of the central nervous system in diving-related decompression illness

    International Nuclear Information System (INIS)

    Reuter, M.; Hutzelmann, A.; Steffens, J.C.; Heller, M.; Fritsch, G.

    1997-01-01

    Purpose: This investigation was conducted to determine whether MR imaging showed cerebral or spinal damage in acute diving-related decompression illness, a term that includes decompressions sickness (DCS) and arterial gas embolism (AGE). Material and Methods: A total of 16 divers with dysbaric injuries were examined after the initiation of therapeutic recompression. Their injuries comprised: neurological DCS II n=8; AGE n=7; combined cerebral-AGE/spinal-DCS n=1. T1- and T2-weighted images of the brain were obtained in 2 planes. In addition, the spinal cord was imaged in 7 subjects. The imaging findings were correlated with the neurological symptoms. Results: MR images of the head showed ischemic cerebrovascular lesions in 6/8 patients with AGE but showed focal hyperintensities in only 2/8 divers with DCS. Spinal-cord involvement was detected in 1/7 examinations, which was the combined cerebral-AGE/spinal-DCS case. There was agreement between the locations of the documented lesions and the clinical manifestations. Conclusion: MR readily detects cerebral damage in AGE but yields low sensitivity in DCS. A negative MR investigation cannot rule out AGE or DCS. However, MR is useful in the examination of patients with decompression illness. (orig.)

  4. Decompression tables for inside chamber attendants working at altitude.

    Science.gov (United States)

    Bell, James; Thombs, Paul A; Davison, William J; Weaver, Lindell K

    2014-01-01

    Hyperbaric oxygen (HBO2) multiplace chamber inside attendants (IAs) are at risk for decompression sickness (DCS). Standard decompression tables are formulated for sea-level use, not for use at altitude. At Presbyterian/St. Luke's Medical Center (Denver, Colorado, 5,924 feet above sea level) and Intermountain Medical Center (Murray, Utah, 4,500 feet), the decompression obligation for IAs is managed with U.S. Navy Standard Air Tables corrected for altitude, Bühlmann Tables, and the Nobendem© calculator. IAs also breathe supplemental oxygen while compressed. Presbyterian/St. Luke's (0.83 atmospheres absolute/atm abs) uses gauge pressure, uncorrected for altitude, at 45 feet of sea water (fsw) (2.2 atm abs) for routine wound care HBO2 and 66 fsw (2.8 atm abs) for carbon monoxide/cyanide poisoning. Presbyterian/St. Luke's provides oxygen breathing for the IAs at 2.2 atm abs. At Intermountain (0.86 atm abs), HBO2 is provided at 2.0 atm abs for routine treatments and 3.0 atm abs for carbon monoxide poisoning. Intermountain IAs breathe intermittent 50% nitrogen/50% oxygen at 3.0 atm abs and 100% oxygen at 2.0 atm abs. The chamber profiles include a safety stop. From 1990-2013, Presbyterian/St. Luke's had 26,900 total IA exposures: 25,991 at 45 fsw (2.2 atm abs) and 646 at 66 fsw (2.8 atm abs); there have been four cases of IA DCS. From 2008-2013, Intermountain had 1,847 IA exposures: 1,832 at 2 atm abs and 15 at 3 atm abs, with one case of IA DCS. At both facilities, DCS incidents occurred soon after the chambers were placed into service. Based on these results, chamber inside attendant risk for DCS at increased altitude is low when the inside attendants breathe supplemental oxygen.

  5. Risk Associated With The Decompression Of High Pressure High Temperature Fluids - Study On Black Oil

    DEFF Research Database (Denmark)

    Figueroa, D. C.; Fosbøl, P. L.; Thomsen, K.

    2015-01-01

    Fluids produced from deep underground reservoirs may result in exponential increase in temperature. It is a consequence of adiabatic fluid decompression from the inverse Joule Thomson Effect (JTE). The phenomenon requires analysis in order to avoid any operational risks. This study evaluates...... the JTE upon decompression of black oil in high pressure-high temperature reservoirs. Also the effect caused by the presence of water and brine on the black oil is studied. The final temperature is calculated from the corresponding energy balance at isenthalpic and non-isenthalpic conditions. It is found...... that the final temperature of black oil increases upon adiabatic decompression. In the case of the isenthalpic process at initial conditions of the reservoir, e.g. 150°C and 1000 bars, it is found that the final temperature can increase to 173.7°C. At non-isenthalpic conditions the final temperature increases...

  6. Mortality Rates After Emergent Posterior Fossa Decompression for Ischemic or Hemorrhagic Stroke in Older Patients.

    Science.gov (United States)

    Puffer, Ross C; Graffeo, Christopher; Rabinstein, Alejandro; Van Gompel, Jamie J

    2016-08-01

    Cerebellar stroke causes major morbidity in the aging population. Guidelines from the American Stroke Association recommend emergent decompression in patients who have brainstem compression, hydrocephalus, or clinical deterioration. The objective of this study was to determine 30-day and 1-year mortality rates in patients >60 years old undergoing emergent posterior fossa decompression. Surgical records identified all patients >60 years old who underwent emergent posterior fossa decompression. Mortality rates were calculated at 30 days and 1 year postoperatively, and these rates were compared with patient and procedure characteristics. During 2000-2014, 34 emergent posterior fossa decompressions were performed in patients >60 years old. Mortality rates at 30 days were 0%, 33%, and 25% for age deciles 60-69 years, 70-79 years, and ≥80 years. Increasing age (alive at 30 days 75.2 years ± 1.7 vs. deceased 81.1 years ± 1.7, P = 0.01) and smaller craniectomy dimensions were associated with 30-day mortality. Mortality rates at 1 year were 0%, 50%, and 67% for age deciles 60-69 years, 70-79 years, and ≥80 years. Increasing age was significantly associated with mortality at 1 year (alive at 1 year 72.3 years ± 2.0 vs. deceased 81.1 years ± 1.2, P mortality. Age was independent of admission Glasgow Coma Scale score as a predictor of mortality at 30 days, 90 days, and 1 year postoperatively. Increasing age and smaller craniectomy size were significantly associated with mortality in patients undergoing emergent posterior fossa decompression. Among patients ≥80 years old, one-quarter were dead within 1 month of the operation, and more than two-thirds were dead within 1 year. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Radiometric, magnetic, and gravity study of the Quixadá batholith, central Ceará domain (NE Brazil): evidence for Pan-African/Brasiliano extension-controlled emplacement

    Science.gov (United States)

    Lopes de Castro, David; Mariano Gomes Castelo Branco, Raimundo; Martins, Guttenberg; Araújo de Castro, Neivaldo

    2002-10-01

    A geophysical survey was conducted in the central Ceará domain of the Borborema Province (NE Brazil). The aim of this investigation was to find geophysical evidence for the emplacement of the Quixadá batholith, which is a granitic body probably situated in the local extensional site in the oblique collisional regime of the Pan-African/Brasiliano collage. Remote sensing and airborne geophysical data provided information on the regional deformation that affected the intrusion and surrounding country rocks. In addition, a gravity study was used to determine the three-dimensional geometry and constrain the emplacement model of the Quixadá granite at depth. The trajectories of structural and magnetic lineaments suggest that the regional deformation is strongly influenced by dextral transcurrent movements of the major shear zones. The batholith, which shows an unusual positive gravity anomaly and a low U counts, displays a subhorizontal floor with several gently dipping areas, which are interpreted as magma feeder channels. The 2300 m thick root zones are roughly aligned with NE-SW-trending shear zones. Finally, the internal architecture of the pluton suggests that the Quixadá batholith was emplaced in a dilational shear zone tip area at the north end of Quixeramobim shear zone.

  8. Simulation of gas bubbles in hypobaric decompressions: roles of O2, CO2, and H2O.

    Science.gov (United States)

    Van Liew, H D; Burkard, M E

    1995-01-01

    To gain insight into the special features of bubbles that may form in aviators and astronauts, we simulated the growth and decay of bubbles in two hypobaric decompressions and a hyperbaric one, all with the same tissue ratio (TR), where TR is defined as tissue PN2 before decompression divided by barometric pressure after. We used an equation system which is solved by numerical methods and accounts for simultaneous diffusion of any number of gases as well as other major determinants of bubble growth and absorption. We also considered two extremes of the number of bubbles which form per unit of tissue. A) Because physiological mechanisms keep the partial pressures of the "metabolic" gases (O2, CO2, and H2O) nearly constant over a range of hypobaric pressures, their fractions in bubbles are inversely proportional to pressure and their large volumes at low pressure add to bubble size. B) In addition, the large fractions facilitate the entry of N2 into bubbles, and when bubble density is low, enhance an autocatalytic feedback on bubble growth due to increasing surface area. C) The TR is not closely related to bubble size; that is when two different decompressions have the same TR, metabolic gases cause bubbles to grow larger at lower hypobaric pressures. We conclude that the constancy of partial pressures of metabolic gases, unimportant in hyperbaric decompressions, affects bubble size in hypobaric decompressions in inverse relation to the exposure pressure.

  9. Melt fracturing and healing: A mechanism for degassing and origin of silicic obsidian

    Science.gov (United States)

    Cabrera, A.; Weinberg, R.F.; Wright, H.M.N.; Zlotnik, S.; Cas, Ray A.F.

    2011-01-01

    We present water content transects across a healed fault in pyroclastic obsidian from Lami pumice cone, Lipari, Italy, using synchrotron Fourier transform infrared spectroscopy. Results indicate that rhyolite melt degassed through the fault surface. Transects define a trough of low water content coincident with the fault trace, surrounded on either side by high-water-content plateaus. Plateaus indicate that obsidian on either side of the fault equilibrated at different pressure-temperature (P-T) conditions before being juxtaposed. The curves into the troughs indicate disequilibrium and water loss through diffusion. If we assume constant T, melt equilibrated at pressures differing by 0.74 MPa before juxtaposition, and the fault acted as a low-P permeable path for H2O that diffused from the glass within time scales of 10 and 30 min. Assuming constant P instead, melt on either side could have equilibrated at temperatures differing by as much as 100 ??C, before being brought together. Water content on the fault trace is particularly sensitive to post-healing diffusion. Its preserved value indicates either higher temperature or lower pressure than the surroundings, indicative of shear heating and dynamic decompression. Our results reveal that water contents of obsidian on either side of the faults equilibrated under different P-T conditions and were out of equilibrium with each other when they were juxtaposed due to faulting immediately before the system was quenched. Degassing due to faulting could be linked to cyclical seismic activity and general degassing during silicic volcanic activity, and could be an efficient mechanism of producing low-water-content obsidian. ?? 2011 Geological Society of America.

  10. High-pressure anatectic paragneisses from the Namche Barwa, Eastern Himalayan Syntaxis: Textural evidence for partial melting, phase equilibria modeling and tectonic implications

    Science.gov (United States)

    Guilmette, C.; Indares, A.; Hébert, R.

    2011-05-01

    Rare kyanite-bearing anatectic paragneisses are found as boudins within sillimanite-bearing paragneisses of the core of the Namche Barwa Antiform, Tibet. In the present study, we document an occurrence from the NW side of the Yarlung Zangbo River. These rocks mainly consist of the assemblage garnet + K-feldspar + kyanite ± biotite + quartz + rutile ± plagioclase with kyanite locally pseudomorphed by sillimanite. The documented textures are consistent with the rocks having undergone biotite-dehydration melting in the kyanite stability field, under high-P granulite facies conditions, and having experienced melt extraction. However textures related to melt crystallization are ubiquitous both in polymineralic inclusions in garnet and in the matrix, suggesting that a melt fraction had remained in these rocks. Phase equilibria modelling was undertaken in the NCKFMASTHO system with THERMOCALC. P-T pseudosections built with the bulk compositions of one aluminous and one sub-aluminous paragneiss samples predict a biotite-kyanite-garnet-quartz-plagioclase-K-feldspar-liquid-rutile ± ilmenite field, in which biotite-dehydration melting occurs, located in the P-T range of ~ 800-875 °C and ~ 10-17 kbar. In addition, the topologies of these pseudosections are consistent with substantial melt loss during prograde metamorphism. A second set of P-T pseudosections with melt-reintegrated model bulk compositions were thus constructed to evaluate the effect of melt loss. The integration of textural information, precise mineral modes, mineral chemistry, and phase equilibria modelling allowed to constrain a P-T path where the rocks are buried to lower crustal depths at peak P-T conditions higher than 14 kbar and 825 °C, possibly in the order of 15-16 kbar and 850 °C, followed by decompression and cooling to P-T conditions of around 9 kbar and 810 °C, under which the remaining melt was solidified. The implications for granite production at the NBA and for Himalayan tectonic models

  11. Arthroscopic Resection of The Distal Clavicle With Concomitant Subacromial Decompression: A Case Series

    Directory of Open Access Journals (Sweden)

    HZ Chan

    2014-07-01

    Full Text Available Shoulder impingement syndrome and acromioclavicular joint osteoarthritis often occur simultaneously and easily missed. Kay et al. reported excellent results with combined arthroscopic subacromial decompression and resection of the distal end of the clavicle in patients with both disorders. Arthroscopic treatment of these disorders produces more favourable results than open procedures. We report two patients who were not responding to conservative management and were treated with direct arthroscopic distal clavicle excision and subacromial decompression in single setting. Both patients gained good postoperative outcome in terms of pain score, function and strength improvement assessed objectively with visual analogue score (VAS and University of California Los Angeles Score (UCLA.

  12. Facet Effusion without Radiographic Instability Has No Effect on the Outcome of Minimally Invasive Decompression Surgery.

    Science.gov (United States)

    Tamai, Koji; Kato, Minori; Konishi, Sadahiko; Matsumura, Akira; Hayashi, Kazunori; Nakamura, Hiroaki

    2017-02-01

    Retrospective cohort study. Lumbar segmental instability is a key factor determining whether decompression alone or decompression and fusion surgery is required to treat lumbar spinal stenosis (LSS). Some recent reports have suggested that facet joint effusion is correlated with spinal segmental instability. The aim of this study is to report the effect of facet effusion without radiographic segmental instability on the outcome of less-invasive decompression surgery for LSS. Seventy-nine patients with LSS (32 women, mean age: 69.1 ± 9.1 years) who had no segmental instability on dynamic radiographs before undergoing L4-L5 microsurgical decompression and who were followed for at least 2 years postoperatively were analyzed. They were divided into three groups on the basis of the existence and size of L4-L5 facet effusion using preoperative magnetic resonance imaging: grade 0 had no effusion ( n  = 31), grade 1 had measurable effusion ( n  = 35), and grade 2 had large effusion ( n  = 13). Japanese Orthopedics Association (JOA) score, visual analog scale (VAS), and the Short-Form (SF)-36 scores were recorded preoperatively and 12 and 24 months postoperatively. JOA score; VAS of low back pain, leg pain, and numbness; and SF-36 (physical component summary and mental component summary) scores did not differ significantly between the three groups in every terms ( p  = 0.921, 0.996, 0.950, 0.693, 0.374, 0.304, and 0.624, respectively, at final follow-up). In the absence of radiographic instability, facet joint effusion has no effect on the outcome of less-invasive decompression surgery.

  13. Transconjunctival orbital decompression in Graves' ophthalmopathy: lateral wall approach ab interno

    NARCIS (Netherlands)

    A.D.A. Paridaens (Dion); K. Verhoeff; D. Bouwens; W.A. van den Bosch (Willem)

    2000-01-01

    textabstractAIMS: A modified surgical technique is described to perform a one, two, or three wall orbital decompression in patients with Graves' ophthalmopathy. METHODS: The lateral wall was approached ab interno through a "swinging eyelid" approach (lateral canthotomy

  14. Volatile diffusion in silicate melts and its effects on melt inclusions

    Directory of Open Access Journals (Sweden)

    P. Scarlato

    2005-06-01

    Full Text Available A compendium of diffusion measurements and their Arrhenius equations for water, carbon dioxide, sulfur, fluorine, and chlorine in silicate melts similar in composition to natural igneous rocks is presented. Water diffusion in silicic melts is well studied and understood, however little data exists for melts of intermediate to basic compositions. The data demonstrate that both the water concentration and the anhydrous melt composition affect the diffusion coefficient of water. Carbon dioxide diffusion appears only weakly dependent, at most, on the volatilefree melt composition and no effect of carbon dioxide concentration has been observed, although few experiments have been performed. Based upon one study, the addition of water to rhyolitic melts increases carbon dioxide diffusion by orders of magnitude to values similar to that of 6 wt% water. Sulfur diffusion in intermediate to silicic melts depends upon the anhydrous melt composition and the water concentration. In water-bearing silicic melts sulfur diffuses 2 to 3 orders of magnitude slower than water. Chlorine diffusion is affected by both water concentration and anhydrous melt composition; its values are typically between those of water and sulfur. Information on fluorine diffusion is rare, but the volatile-free melt composition exerts a strong control on its diffusion. At the present time the diffusion of water, carbon dioxide, sulfur and chlorine can be estimated in silicic melts at magmatic temperatures. The diffusion of water and carbon dioxide in basic to intermediate melts is only known at a limited set of temperatures and compositions. The diffusion data for rhyolitic melts at 800°C together with a standard model for the enrichment of incompatible elements in front of growing crystals demonstrate that rapid crystal growth, greater than 10-10 ms-1, can significantly increase the volatile concentrations at the crystal-melt interface and that any of that melt trapped

  15. [Research on the incidence of decompression sickness in compressed air works. The development of its recent five years' study].

    Science.gov (United States)

    Mano, Y; Shibayama, M; Matsui, Y

    1987-07-01

    Compressed air works have been used as the safest construction work for the basic underground or underwater compressed shield or caisson works in Japan; however, the workers who were exposed to the compressed fields must have put themselves at risk of decompression sickness. Decompression sickness is generally considered to be due to the bubble effects and the bubbles originate from the supersaturated gas dissolved in the blood and other tissues. The standard decompression schedule by the Ministry of Labor has been practically applied at the end of compressed air works, and the laborers decompress slowly from the bottom pressure to the surface according to the schedule. It is difficult to completely prevent the sickness and the average percentage of contracting "bends," using the Japanese standard decompression schedule, is considered to be 0.54%. But previous papers reported higher incidences from 1.42 to 3.3% or more. We have continued an actual investigation on the incidence, and the number of the exposed trials amounted to nearly a hundred thousand. These data were compared between recent five years' group and before. Eventually, it was ascertained that the incidence has been significantly decreased in the recent five years; however, greater care in occupational safety control is still needed.

  16. Enough positive rate of paraspinal mapping and diffusion tensor imaging with levels which should be decompressed in lumbar spinal stenosis.

    Science.gov (United States)

    Chen, Hua-Biao; Zhong, Zhi-Wei; Li, Chun-Sheng; Bai, Bo

    2016-07-01

    In lumbar spinal stenosis, correlating symptoms and physical examination findings with decompression levels based on common imaging is not reliable. Paraspinal mapping (PM) and diffusion tensor imaging (DTI) may be possible to prevent the false positive occurrences with MRI and show clear benefits to reduce the decompression levels of lumbar spinal stenosis than conventional magnetic resonance imaging (MRI) + neurogenic examination (NE). However, they must have enough positive rate with levels which should be decompressed at first. The study aimed to confirm that the positive of DTI and PM is enough in levels which should be decompressed in lumbar spinal stenosis. The study analyzed the positive of DTI and PM as well as compared the preoperation scores to the postoperation scores, which were assessed preoperatively and at 2 weeks, 3 months 6 months, and 12 months postoperatively. 96 patients underwent the single level decompression surgery. The positive rate among PM, DTI, and (PM or DTI) was 76%, 98%, 100%, respectively. All post-operative Oswestry Disability Index (ODI), visual analog scale for back pain (VAS-BP) and visual analog scale for leg pain (VAS-LP) scores at 2 weeks postoperatively were measured improvement than the preoperative ODI, VAS-BP and VAS-LP scores with statistically significance (p-value = 0.000, p-value = 0.000, p-value = 0.000, respectively). In degenetive lumbar spinal stenosis, the positive rate of (DTI or PM) is enough in levels which should be decompressed, thence using the PM and DTI to determine decompression levels will not miss the level which should be operated. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

  17. Decompression illness treated in Denmark 1999-2013

    DEFF Research Database (Denmark)

    Juhl, Christian Svendsen; Hedetoft, Morten; Bidstrup, Daniel

    2016-01-01

    of previous dives, type of diving, initial type of hyperbaric treatment and DCI symptoms. Trend in annual case numbers was evaluated using run chart analysis and Spearman's correlation. Age, height, weight, and BMI were evaluated using linear regression. The presence of long-term residual symptoms......INTRODUCTION: The incidence, diver characteristics and symptomatology of decompression illness (DCI) in Denmark has not been assessed since 1982, and the presence of long-term residual symptoms among divers receiving hyperbaric oxygen therapy in Denmark has never been estimated to our knowledge...

  18. Left Atrial Decompression by Percutaneous Left Atrial Venting Cannula Insertion during Venoarterial Extracorporeal Membrane Oxygenation Support

    Directory of Open Access Journals (Sweden)

    Ha Eun Kim

    2016-06-01

    Full Text Available Patients with venoarterial extracorporeal membrane oxygenation (ECMO frequently suffer from pulmonary edema due to left ventricular dysfunction that accompanies left heart dilatation, which is caused by left atrial hypertension. The problem can be resolved by left atrium (LA decompression. We performed a successful percutaneous LA decompression with an atrial septostomy and placement of an LA venting cannula in a 38-month-old child treated with venoarterial ECMO for acute myocarditis.

  19. Subcooled decompression analysis of the ROSA and the LOFT semiscale blowdown test data with the digital computer code DEPCO-MULTI

    International Nuclear Information System (INIS)

    Namatame, Ken; Kobayashi, Kensuke

    1975-12-01

    In the ROSA (Rig of Safety Assessment) program, the digital computer code DEPCO-SINGLE and DEPCO-MULTI (Subcooled Decompression Process in Loss-of-Coolant Accident - Single Pipe and - Multiple Pipe Network) were prepared to study thermo-hydraulic behavior of the primary coolant in subcooled decompression of the PWR LOCA. The analytical results with DEPCO-MULTI on the subcooled decompression phenomena are presented for ROSA-I, ROSA-II and LOFT 500, 600, 700 and 800 series experiments. The effects of space mesh length, elasticity of pressure boundary materials and simplification for computational piping system on the computed result are described. This will be the final work on the study of the subcooled decompression analysis as for the ROSA program, and the authors wish that the present code shall further be examined with the data of much advanced experiments. (auth.)

  20. Isotope geochemistry of brasiliano age, coarsely porphyritic, K-calc-alkalic granitoids and associated K-diorites, northeast Brazil

    International Nuclear Information System (INIS)

    Sial, A.N.; Mariano, G.; Ferreira, V.P.

    1989-01-01

    Several porphyritic, K-calc-alkalic were syntectonically intruded in NE Brazil during the Brasiliano orogeny. They show bi-(qz) diorite and coarsely porphyritic granodiorite to qz monzonite ('Itaporanga-type') in commingling zones on a scale of cm to m irrespective of whether plutons are at the margins of the NE-trending Cachoeirinha-Salgueiro Fold Belt (CSF) or intruded metasediments of the Serido Fold Belt (SFB). The bi(qz) diorites are found in magmatic or stromatic structures and narrow dikes wich intruded the felsic facies. SiO 2 in the porphyritic facies ranges from 61 to 72% with K 2 O usually > Na 2 O. K-diorities exhibit SiO 2 from 50 to 58%, MgO from 2 to 10% and K 2 O from 2 to 5%. Both facies are usually Ba and Sr-enriched, with similar, highly fractionated REE patterns, lacking free of Eu anomaly. Quartz 180 values are considered homogeneous on the scale of these intrusions in the CSF, (8 to 10 per milSMOW). Bi-(qz) diorites exhibit slightly higher 180 (9.5 to 10.5 per milSMOW). In the SFB both facies are lower than 180. The oxygen isotope data for the porphyritic facies are compatible with I-type source with some metasedimentary component of variable proportion. As bi(qz) diorites were formed pre- to post-porphyritic facies intrusion, their high LREE, K and 180 reflect their source rather than the interaction with the potassic felsic magma. Preliminarly sulfur isotope values suggest that porphyritic facies of granitoids in the SBF are lower in 34S than those in the CSF. Rb and Sr isotopes reflect source heterogeneity, complicated by mixing relations. Ages span from 510 to 630 Ma suggesting that the Itaporanga-type association was formed during uplift and cooling of the Pan-African I and onset of the Pan-African II orogenies, recognized in West Africa. (author) [pt

  1. Double melting in polytetrafluoroethylene γ-irradiated above its melting point

    International Nuclear Information System (INIS)

    Serov, S.A.; Khatipov, S.A.; Sadovskaya, N.V.; Tereshenkov, A.V.; Chukov, N.A.

    2012-01-01

    Highlights: ► PTFE irradiation leads to formation of double melting peaks in DSC curves. ► This is connected to dual crystalline morphology typical for PTFE. ► Two crystalline types exist in the PTFE irradiated in the melt. - Abstract: PTFE irradiation above its melting point leads to formation of double melting and crystallization peaks in DSC curves. Splitting of melting peaks is connected to dual crystalline morphology typical for PTFE irradiated in the melt. According to electron microscopy, two crystalline types with different size and packing density exist in the irradiated PTFE.

  2. Effect of decompressive hemicraniectomy on mortality of malignant middle cerebral artery infarction

    Directory of Open Access Journals (Sweden)

    Bahram Aminmansour

    2010-01-01

    Full Text Available Background: Increasing intracranial pressure (ICP is one of the leading causes of mortality in patients with malignant infarction of the middle cerebral artery (MCA. We prospectively evaluated patients with MCA infarction for one month survival after decompressive hemicraniectomy. Methods: This study was conducted at Alzahra University Hospital, Isfahan (Iran. Twenty patients with infarction in total MCA distribution area, resulting in midline shift of brain tissue for greater than 5mm, underwent decompressive hemicraniectomy. Mortality rate was estimated one month after surgery. Results: Patients were 8 (40% males and 12 (60% females with a mean age of 49.9 ± 3.8 (25 to 70 years. Left and right MCA were involved in 7 (35% and 13 (65% patients, respectively. Four (20% patients died within one month after surgery (3 females and one male, mean age of 59.0 ± 4.5 vs. 47.6 ± 3.4 in survived patients, p < 0.001. The mean of baseline Glasscow Coma Scale (GCS score estimated 8.60 ± 1.55 in survived patients and 6.75 ± 0.95 in patients who died (p < 0.05. Conclusions: The survival rate of malignant MCA infarction treated with decompressive hemicraniectomy was the same as previous reports. MCA infarction mortality increased with age and lower admission GCS score.

  3. Melting method for miscellaneous radioactive solid waste and melting furnace

    International Nuclear Information System (INIS)

    Osaki, Toru; Furukawa, Hirofumi; Uda, Nobuyoshi; Katsurai, Kiyomichi

    1998-01-01

    A vessel containing miscellaneous solid wastes is inserted in a crucible having a releasable material on the inner surface, they are induction-heated from the outside of the crucible by way of low temperature heating coils to melt low melting point materials in the miscellaneous wastes within a temperature range at which the vessel does not melt. Then, they are induction-heated by way of high temperature heating coils to melt the vessel and not yet melted materials, those molten materials are cooled, solidified molten material and the releasable material are taken out, and then the crucible is used again. Then, the crucible can be used again, so that it can be applied to a large scaled melting furnace which treats wastes by a unit of drum. In addition, since the cleaning of the used crucible and the application of the releasable material can be conducted without interrupting the operation of the melting furnace, the operation cycle of the melting furnace can be shortened. (N.H.)

  4. The effect of core decompression on local expression of BMP-2, PPAR-γ and bone regeneration in the steroid-induced femoral head osteonecrosis

    Directory of Open Access Journals (Sweden)

    Wang Wei

    2012-08-01

    Full Text Available Abstract Background To investigate the efficacy of the sole core decompression surgery for the treatment of steroid-induced femoral head osteonecrosis. Methods The model was established by administration of steroids in combination with horse serum. The rabbits with bilateral femoral head osteonecrosis were randomly selected to do the one side of core decompression. The other side was used as the sham. Quantitative RT-PCR and western blot techniques were used to measure the local expression of BMP-2 and PPAR-γ. Bone tissues from control and operation groups were histologically analyzed by H&E staining. The comparisons of the local expression of BMP-2 and PPAR-γ and the bone regeneration were further analyzed between different groups at each time point. Results The expression of BMP-2 in the osteonecrosis femoral head with or without decompression was significantly lower than that in normal animals. BMP-2 expression both showed the decreasing trend with the increased post-operation time. No significant difference of BMP-2 expression occurred between femoral head osteonecrosis with and without decompression. The PPAR-γ expression in the femoral head osteonecrosis with and without core decompression both was significantly higher than that in control. Its expression pattern showed a significantly increased trend with increased the post-operation time. However, there was no significant difference of PPAR-γ expression between the femoral head osteonecrosis with and without decompression at each time point. Histopathological analysis revealed that new trabecular bone and a large number of osteoblasts were observed in the steroid-induced femoral head osteonecrosis with lateral decompression at 8 weeks after surgery, but there still existed trabecular bone fractures and bone necrosis. Conclusions Although decompression takes partial effect in promoting bone regeneration in the early treatment of femoral head osteonecrosis, such an effect does not

  5. MRI appearance of femoral head osteonecrosis following core decompression and bone grafting

    Energy Technology Data Exchange (ETDEWEB)

    Chan, T W; Dalinka, M K; Kressel, H Y [Pennsylvania Univ. Hospital, Philadelphia, PA (USA). Dept. of Radiology; Steinberg, M E [Pennsylvania Univ. Hospital, Philadelphia, PA (USA). Dept. of Orthopedic Surgery

    1991-02-01

    We used magnetic resonance imaging (MRI) to evaluate retrospectively 32 hips with avascular necrosis of the femoral head before and after core decompression and bone grafting. At a median follow-up time of 15 months, 4 of 9 large lesions had undergone femoral head collapse; 2 small lesions had decreased in size; and 14 small, 6 moderate, and 5 large lesions were unchanged. One hip with biopsy-proven avascular necrosis had diffuse marrow edema which resolved after surgery. The signal pattern within the lesions was analyzed in 17 hips. MRI can demonstrate changes in size and signal characteristics as well as femoral head collapse after core decompression and bone grafting. Changes in the surrounding marrow signal, including resolution of marrow edema and reconversion from fatty to hemopoietic marrow, can also be detected. (orig./GDG).

  6. Impact of timing of cranioplasty on hydrocephalus after decompressive hemicraniectomy in malignant middle cerebral artery infarction.

    Science.gov (United States)

    Finger, Tobias; Prinz, Vincent; Schreck, Evelyn; Pinczolits, Alexandra; Bayerl, Simon; Liman, Thomas; Woitzik, Johannes; Vajkoczy, Peter

    2017-02-01

    Patients with malignant middle cerebral artery infarction frequently develop hydrocephalus after decompressive hemicraniectomy. Hydrocephalus itself and known shunt related complications after ventriculo-peritoneal shunt implantation may negatively impact patientś outcome. Here, we aimed to identify factors associated with the development of hydrocephalus after decompressive hemicraniectomy in malignant middle cerebral artery infarction. A total of 99 consecutive patients with the diagnosis of large hemispheric infarctions and the indication for decompressive hemicraniectomy were included. We retrospectively evaluated patient characteristics (gender, age and selected preoperative risk factors), stroke characteristics (side, stroke volume and existing mass effect) and surgical characteristics (size of the bone flap, initial complication rate, time to cranioplasty, complication rate following cranioplasty, type of implant, number of revision surgeries and mortality). Frequency of hydrocephalus development was 10% in our cohort. Patients who developed a hydrocephalus had an earlier time point of bone flap reimplantation compared to the control group (no hydrocephalus=164±104days, hydrocephalus=108±52days, phydrocephalus with a trend towards significance (p=0.08). Communicating hydrocephalus is frequent in patients with malignant middle cerebral artery infarction after decompressive hemicraniectomy. A later time point of cranioplasty might lead to a lower incidence of required shunting procedures in general as we could show in our patient cohort. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Microvascular decompression for trigeminal neuralgia

    International Nuclear Information System (INIS)

    Khan, S.A.; Khan, B.; Khan, A.A.; Afridi, E.A.A.; Mehmood, S.; Muhammad, G.; Hussain, I.; Zadran, K.K.; Bhatti, S.N.

    2015-01-01

    Background: Trigeminal Neuralgia (TGN) is the most frequently diagnosed type of facial pain. In idiopathic type of TGN it is caused by the neuro-vascular conflict involving trigeminal nerve. Microvascular decompression (MVD) aims at addressing this basic pathology in the idiopathic type of TGN. This study was conducted to determine the outcome and complications of patients with idiopathic TGN undergoing MVD. Method: In a descriptive case series patients with idiopathic TGN undergoing MVD were included in consecutive manner. Patients were diagnosed on the basis of detailed history and clinical examination. Retromastoid approach with craniectomy was used to access cerebellopontine angle (CP-angle) and microsurgical decompression was done. Patients were followed up for 6 months. Results: A total of 53 patients underwent MVD with mean age of 51.6±4.2 years and male predominance. In majority of cases (58.4 percentage) both Maxillary and Mandibular divisions were involved. Per-operatively superior cerebellar artery (SCA) was causing the neuro-vascular conflict in 33 (62.2 percentage) of the cases, anterior inferior cerebellar artery (AICA) in 6 (11.3 percentage) cases, both CSA and AICA in 3 (5.6 percentage) cases, venous compressions in only 1 (1.8percentage) patient and thick arachnoid adhesions were seen in 10 (18.9 percentage) patients. Postoperatively, 33 (68 percentage) patients were pain free, in 14 (26.45 percentage) patients pain was significantly improved whereas in 3 (5.6 percentage) patients there was mild improvement in symptoms. Three (5.6 percentage) patients did not improve after the primary surgery. Cerebrospinal fluid (CSF) leak was encountered in 7 (13.2 percentage) patients post-operatively, 4 (7.5 percentage) patients developed wound infection and 1 (1.8 percentage) patient developed aseptic meningitis. Three (5.6 percentage) patients had transient VII nerve palsy while one patient developed permanent VII nerve palsy. Conclusion: MVD is a safe and

  8. Hemifacial spasm : Intraoperative electromyographic monitoring as a guide for microvascular decompression

    NARCIS (Netherlands)

    Mooij, JJA; Mustafa, MK; van Weerden, TW

    2001-01-01

    OBJECTIVE: Microvascular decompression is the logical and well-accepted treatment of choice for hemifacial spasm (HFS). In experienced hands, good to excellent results can be obtained. However, sometimes the exact site of the vascular compression is unclear. The aim of this study was to analyze

  9. Aluminosilicate melts and glasses at 1 to 3 GPa: Temperature and pressure effects on recovered structural and density changes

    Science.gov (United States)

    Bista, S; Stebbins, Jonathan; Hankins, William B.; Sisson, Thomas W.

    2015-01-01

    In the pressure range in the Earth’s mantle where many basaltic magmas are generated (1 to 3 GPa) (Stolper et al. 1981), increases in the coordination numbers of the network-forming cations in aluminosilicate melts have generally been considered to be minor, although effects on silicon and particularly on aluminum coordination in non-bridging oxygen-rich glasses from the higher, 5 to 12 GPa range, are now well known. Most high-precision measurements of network cation coordination in such samples have been made by spectroscopy (notably 27Al and 29Si NMR) on glasses quenched from high-temperature, high-pressure melts synthesized in solid-media apparatuses and decompressed to room temperature and 1 bar pressure. There are several effects that could lead to the underestimation of the extent of actual structural (and density) changes in high-pressure/temperature melts from such data. For non-bridging oxygen-rich sodium and calcium aluminosilicate compositions in the 1 to 3 GPa range, we show here that glasses annealed near to their glass transition temperatures systematically record higher recovered increases in aluminum coordination and in density than samples quenched from high-temperature melts. In the piston-cylinder apparatus used, rates of cooling through the glass transition are measured as very similar for both higher and lower initial temperatures, indicating that fictive temperature effects are not the likely explanation of these differences. Instead, transient decreases in melt pressure during thermal quenching, which may be especially large for high initial run temperatures, of as much as 0.5 to 1 GPa, may be responsible. As a result, the equilibrium proportion of high-coordinated Al in this pressure range may be 50 to 90% greater than previously estimated, reaching mean coordination numbers (e.g., 4.5) that are probably high enough to significantly affect melt properties. New data on jadeite (NaAlSi2O6) glass confirm that aluminum coordination increase

  10. Total Facial Nerve Decompression for Severe Traumatic Facial Nerve Paralysis: A Review of 10 Cases

    Directory of Open Access Journals (Sweden)

    Sertac Yetiser

    2012-01-01

    Full Text Available Management of traumatic facial nerve disorders is challenging. Facial nerve decompression is indicated if 90–95% loss of function is seen at the very early period on ENoG or if there is axonal degeneration on EMG lately with no sign of recovery. Middle cranial or translabyrinthine approach is selected depending on hearing. The aim of this study is to present retrospective review of 10 patients with sudden onset complete facial paralysis after trauma who underwent total facial nerve decompression. Operation time after injury is ranging between 16 and105 days. Excitation threshold, supramaximal stimulation, and amplitude on the paralytic side were worse than at least %85 of the healthy side. Six of 11 patients had HBG-II, one patient had HBG-I, 3 patients had HBG-III, and one patient had HBG-IV recovery. Stretch, compression injuries with disruption of the endoneurial tubules undetectable at the time of surgery and lack of timely decompression may be associated with suboptimal results in our series.

  11. Technical and economic analysis of natural ga decompression: recovery of both electricity and process frigories

    International Nuclear Information System (INIS)

    Fracastoro, G.V.; Perino, M.

    1996-01-01

    The most significant results of the economic analysis on natural gas decompression, specifically referring to EniChem's newly built plant in Porto Marghera, are shown in this article. The analysis was carried out in the framework of rational utilization of energy in compliance with Law No.9 of January 9, 1991. In order to optimize the final use of energy, the service rendered being equal (natural gas was decompressed owing to safety and technical reasons), a possible solution was found, i.e. to replace thermodynamic lamination by an expansion process in a two-stage turbine expansor (recovery of physical energy in pressure). Thanks to this new solution, the above mentioned recovery operation can be integrated by recovering the frigories associated with the availability of the fluid stream (physical energy in temperature) at the outlet of the generator, in order to supply the refrigerating quantity needed to carry out some phases of the steam-cracking process, which takes place in an area lying close to the new decompression plant

  12. Tin in granitic melts: The role of melting temperature and protolith composition

    Science.gov (United States)

    Wolf, Mathias; Romer, Rolf L.; Franz, Leander; López-Moro, Francisco Javier

    2018-06-01

    Granite bound tin mineralization typically is seen as the result of extreme magmatic fractionation and late exsolution of magmatic fluids. Mineralization, however, also could be obtained at considerably less fractionation if initial melts already had enhanced Sn contents. We present chemical data and results from phase diagram modeling that illustrate the dominant roles of protolith composition, melting conditions, and melt extraction/evolution for the distribution of Sn between melt and restite and, thus, the Sn content of melts. We compare the element partitioning between leucosome and restite of low-temperature and high-temperature migmatites. During low-temperature melting, trace elements partition preferentially into the restite with the possible exception of Sr, Cd, Bi, and Pb, that may be enriched in the melt. In high-temperature melts, Ga, Y, Cd, Sn, REE, Pb, Bi, and U partition preferentially into the melt whereas Sc, V, Cr, Co, Ni, Mo, and Ba stay in the restite. This contrasting behavior is attributed to the stability of trace element sequestering minerals during melt generation. In particular muscovite, biotite, titanite, and rutile act as host phases for Sn and, therefore prevent Sn enrichment in the melt as long as they are stable phases in the restite. As protolith composition controls both the mineral assemblage and modal contents of the various minerals, protolith composition eventually also controls the fertility of a rock during anatexis, restite mineralogy, and partitioning behavior of trace metals. If a particular trace element is sequestered in a phase that is stable during partial melting, the resulting melt is depleted in this element whereas the restite becomes enriched. Melt generation at high temperature may release Sn when Sn-hosts become unstable. If melt has not been lost before the breakdown of Sn-hosts, Sn contents in the melt will increase but never will be high. In contrast, if melt has been lost before the decomposition of Sn

  13. Comparative Study on Two Melting Simulation Methods: Melting Curve of Gold

    International Nuclear Information System (INIS)

    Liu Zhong-Li; Li Rui; Sun Jun-Sheng; Zhang Xiu-Lu; Cai Ling-Cang

    2016-01-01

    Melting simulation methods are of crucial importance to determining melting temperature of materials efficiently. A high-efficiency melting simulation method saves much simulation time and computational resources. To compare the efficiency of our newly developed shock melting (SM) method with that of the well-established two-phase (TP) method, we calculate the high-pressure melting curve of Au using the two methods based on the optimally selected interatomic potentials. Although we only use 640 atoms to determine the melting temperature of Au in the SM method, the resulting melting curve accords very well with the results from the TP method using much more atoms. Thus, this shows that a much smaller system size in SM method can still achieve a fully converged melting curve compared with the TP method, implying the robustness and efficiency of the SM method. (paper)

  14. [Clinical effects of Dynesys system and transfacet decompression through Wiltse approach in the treatment of lumbar degenerative diseases].

    Science.gov (United States)

    Shang, K; Chen, M J; Wang, D G

    2017-05-23

    Objective: To investigate the early clinical effects of Dynesys system and transfacet decompression by Wiltse approach in the treatment of lumbar degenerative diseases. Methods: From January 2010 to December 2013, 48 patients suffering from lumbar degenerative diseases were treated with Dynesys system in addition to transfacet decompression through Wiltse approach.There were 28 males and 20 females with age of (51.8±6.8). The preoperative diagnosis included lumbar spinal stenosis(10 cases); lumber intervertebral disc herniation (38 cases). There were 23 cases in L4/5, 16 cases in L5/S1 and 9 cases in both of L4/5 and L5/S1.Posterolateral fixation with Dynesys pedicle screw through Wiltse approach.Unilateral resection of the inferior articular facet of the superior vertebra and the superior articular facet of the inferior vertebra.Decompression of the vertebral canal until the never root was decompressed satisfactorily.In the end, Dynesys was performed according to normal procedure.VAS, ODI evaluating standards were applied to evaluate the therapeutic effect.The intervertebral space and ROM of the lumbar were observed by X ray. Results: All patients underwent surgery safely without severe complications occurred.The average following up time was 33.5 (24-60) months.Compared with preoperative parameters (7.7±1.3, 70.8±13.5), the scores of VAS and ODI decreased significantly after surgery (2.3±1.5, 23.6±12.2) and at the final follow-up (2.2±1.4, 20.0±9.8) ( P 0.05). X-ray scan showed neither instability or internal fixation loosen, breakage or distortion in follow-up. Conclusion: Dynesys system in addition to transfacet decompression through Wiltse approach is a therapy option for mild lumbar degenerative disease.This method can retention the structure of lumbar posterior complex and the activity of the fixed segment, reduce the risk of low back pain together with nerve root decompressed.The early clinical results are satisfactory.

  15. A Cost-Utility Analysis of Lumbar Decompression With and Without Fusion for Degenerative Spine Disease in the Elderly.

    Science.gov (United States)

    Devin, Clinton J; Chotai, Silky; Parker, Scott L; Tetreault, Lindsay; Fehlings, Michael G; McGirt, Matthew J

    2015-10-01

    Value-based purchasing is rapidly being implemented to rein in the unsustainably rising costs of the US healthcare system. With a growing elderly population, it is vital to understand the value of spinal surgery in this group of individuals. To compare the cost-effectiveness of lumbar decompression with and without fusion for degenerative spine disease in elderly vs nonelderly patients. A total of 221 patients undergoing elective primary surgery for degenerative lumbar pathology who were enrolled in a prospective longitudinal registry were analyzed. Patient-reported outcomes of Oswestry Disability Index, numeric rating scale for back and leg pain, and quality-of-life scores (EuroQol-5D) were recorded. Two-year back-related medical resource use, missed work, and health-state values (quality-adjusted life-years [QALYs]) were assessed. Two-year resource use was multiplied by unit costs based on Medicare national allowable payment amounts (direct cost). Patient and caregiver workday losses were multiplied by gross-of-tax wage rate (indirect cost). Patients were divided into age groups <70 and ≥70 years. Mean cumulative 2-year QALYs gained were statistically similar between younger and older patients for both decompression alone (0.67 ± 0.65 vs 0.56 ± 0.65; P = .47) and decompression with fusion (0.56 ± 0.55 vs 0.59 ± 0.55; P = .26). Mean 2-year cost per QALY gained between younger and older patients was similar for both decompression alone ($24,365 vs $31,750 per QALY; P = .11) and decompression with fusion ($64,228 vs $60,183 per QALY; P = .09). Surgical treatment provided significant improvements in pain, disability, and quality of life for elderly patients with degenerative lumbar disease. Observed costs per QALY gained for lumbar decompression with and without fusion were similar for younger and older patients, demonstrating that lumbar spine surgery in the elderly is an equally cost-effective and valuable intervention.

  16. Olivine/melt transition metal partitioning, melt composition, and melt structure—Melt polymerization and Qn-speciation in alkaline earth silicate systems

    Science.gov (United States)

    Mysen, Bjorn O.

    2008-10-01

    The two most abundant network-modifying cations in magmatic liquids are Ca 2+ and Mg 2+. To evaluate the influence of melt structure on exchange of Ca 2+ and Mg 2+ with other geochemically important divalent cations ( m-cations) between coexisting minerals and melts, high-temperature (1470-1650 °C), ambient-pressure (0.1 MPa) forsterite/melt partitioning experiments were carried out in the system Mg 2SiO 4-CaMgSi 2O 6-SiO 2 with ⩽1 wt% m-cations (Mn 2+, Co 2+, and Ni 2+) substituting for Ca 2+ and Mg 2+. The bulk melt NBO/Si-range ( NBO/Si: nonbridging oxygen per silicon) of melt in equilibrium with forsterite was between 1.89 and 2.74. In this NBO/Si-range, the NBO/Si(Ca) (fraction of nonbridging oxygens, NBO, that form bonds with Ca 2+, Ca 2+- NBO) is linearly related to NBO/Si, whereas fraction of Mg 2+- NBO bonds is essentially independent of NBO/Si. For individual m-cations, rate of change of KD( m-Mg) with NBO/Si(Ca) for the exchange equilibrium, mmelt + Mg olivine ⇌ molivine + Mg melt, is linear. KD( m-Mg) decreases as an exponential function of increasing ionic potential, Z/ r2 ( Z: formal electrical charge, r: ionic radius—here calculated with oxygen in sixfold coordination around the divalent cations) of the m-cation. The enthalpy change of the exchange equilibrium, Δ H, decreases linearly with increasing Z/ r2 [Δ H = 261(9)-81(3)· Z/ r2 (Å -2)]. From existing information on (Ca,Mg)O-SiO 2 melt structure at ambient pressure, these relationships are understood by considering the exchange of divalent cations that form bonds with nonbridging oxygen in individual Qn-species in the melts. The negative ∂ KD( m-Mg) /∂( Z/ r2) and ∂(Δ H)/∂( Z/ r2) is because increasing Z/ r2 is because the cations forming bonds with nonbridging oxygen in increasingly depolymerized Qn-species where steric hindrance is decreasingly important. In other words, principles of ionic size/site mismatch commonly observed for trace and minor elements in crystals, also

  17. Permeability and 3-D melt geometry in shear-induced high melt fraction conduits

    Science.gov (United States)

    Zhu, W.; Cordonnier, B.; Qi, C.; Kohlstedt, D. L.

    2017-12-01

    Observations of dunite channels in ophiolites and uranium-series disequilibria in mid-ocean ridge basalt suggest that melt transport in the upper mantle beneath mid-ocean ridges is strongly channelized. Formation of high melt fraction conduits could result from mechanical shear, pyroxene dissolution, and lithological partitioning. Deformation experiments (e.g. Holtzman et al., 2003) demonstrate that shear stress causes initially homogeneously distributed melt to segregate into an array of melt-rich bands, flanked by melt-depleted regions. At the same average melt fraction, the permeability of high melt fraction conduits could be orders of magnitude higher than that of their homogenous counterparts. However, it is difficult to determine the permeability of melt-rich bands. Using X-ray synchrotron microtomography, we obtained high-resolution images of 3-dimensional (3-D) melt distribution in a partially molten rock containing shear-induced high melt fraction conduits. Sample CQ0705, an olivine-alkali basalt aggregate with a nominal melt fraction of 4%, was deformed in torsion at a temperature of 1473 K and a confining pressure of 300 MPa to a shear strain of 13.3. A sub-volume of CQ0705 encompassing 3-4 melt-rich bands was imaged. Microtomography data were reduced to binary form so that solid olivine is distinguishable from basalt glass. At a spatial resolution of 160 nm, the 3-D images reveal the shape and connectedness of melt pockets in the melt-rich bands. Thin melt channels formed at grain edges are connected at large melt nodes at grain corners. Initial data analysis shows a clear preferred orientation of melt pockets alignment subparallel to the melt-rich band. We use the experimentally determined geometrical parameters of melt topology to create a digital rock with identical 3-D microstructures. Stokes flow simulations are conducted on the digital rock to obtain the permeability tensor. Using this digital rock physics approach, we determine how deformation

  18. Operative Technique and Clinical Outcome in Endoscopic Core Decompression of Osteochondral Lesions of the Talus: A Pilot Study

    OpenAIRE

    Beck, Sascha; Cla?en, Tim; Haversath, Marcel; J?ger, Marcus; Landgraeber, Stefan

    2016-01-01

    Background Revitalizing the necrotic subchondral bone and preserving the intact cartilage layer by retrograde drilling is the preferred option for treatment of undetached osteochondral lesions of the talus (OLT). We assessed the effectiveness of Endoscopic Core Decompression (ECD) in treatment of OLT. Material/Methods Seven patients with an undetached OLT of the medial talar dome underwent surgical treatment using an arthroscopically-guided transtalar drill meatus for core decompression of th...

  19. Endoscopic Decompression and Marsupialization of A Duodenal Duplication Cyst

    Directory of Open Access Journals (Sweden)

    Eliza I-Lin Sin

    2018-06-01

    Full Text Available Introduction: Duodenal duplication cysts are rare congenital foregut anomalies, accounting for 2%–12% of all gastrointestinal tract duplications. Surgical excision entails risk of injury to the pancreaticobiliary structures due to proximity or communication with the cyst. We present a case of duodenal duplication cyst in a 3 year-old boy who successfully underwent endoscopic decompression. Case report: AT is a young boy who first presented at 15 months of age with abdominal pain. There was one subsequent episode of pancreatitis. Ultrasonography showed the typical double wall sign of a duplication cyst and magnetic resonance cholangio-pancreatography showed a large 5 cm cyst postero-medial to the second part of the duodenum, communicating with the pancreaticobiliary system and causing dilatation of the proximal duodenum. He subsequently underwent successful endoscopic ultrasound guided decompression at 3 years of age under general anesthesia, and had an uneventful postoperative recovery. Conclusion: Endoscopic ultrasound guided assessment and treatment of gastrointestinal duplication cysts is increasingly reported in adults. To the best of our knowledge, only one case of endoscopic treatment of duodenal duplication cyst, in an older child, has been reported thus far in the paediatric literature. In this paper, we review the current literature and discuss the therapeutic options of this rare condition.

  20. Treatment of decompression illness with heliox: the best of both worlds?

    NARCIS (Netherlands)

    van Hulst, Robert A.

    2014-01-01

    There are many ways to treat decompression illness (DCI) at increased pressure. In the last 20 years much has been published on the use of oxygen and helium/oxygen mixtures at different depths. The type of information ranges from impressive work on animals, case reports, small series of case reports

  1. Microvascular Decompression for Classical Trigeminal Neuralgia Caused by Venous Compression: Novel Anatomic Classifications and Surgical Strategy.

    Science.gov (United States)

    Wu, Min; Fu, Xianming; Ji, Ying; Ding, Wanhai; Deng, Dali; Wang, Yehan; Jiang, Xiaofeng; Niu, Chaoshi

    2018-05-01

    Microvascular decompression of the trigeminal nerve is the most effective treatment for trigeminal neuralgia. However, when encountering classical trigeminal neuralgia caused by venous compression, the procedure becomes much more difficult, and failure or recurrence because of incomplete decompression may become frequent. This study aimed to investigate the anatomic variation of the culprit veins and discuss the surgical strategy for different types. We performed a retrospective analysis of 64 consecutive cases in whom veins were considered as responsible vessels alone or combined with other adjacent arteries. The study classified culprit veins according to operative anatomy and designed personalized approaches and decompression management according to different forms of compressive veins. Curative effects were assessed by the Barrow Neurological Institute (BNI) pain intensity score and BNI facial numbness score. The most commonly encountered veins were the superior petrosal venous complex (SPVC), which was artificially divided into 4 types according to both venous tributary distribution and empty point site. We synthetically considered these factors and selected an approach to expose the trigeminal root entry zone, including the suprafloccular transhorizontal fissure approach and infratentorial supracerebellar approach. The methods of decompression consist of interposing and transposing by using Teflon, and sometimes with the aid of medical adhesive. Nerve combing (NC) of the trigeminal root was conducted in situations of extremely difficult neurovascular compression, instead of sacrificing veins. Pain completely disappeared in 51 patients, and the excellent outcome rate was 79.7%. There were 13 patients with pain relief treated with reoperation. Postoperative complications included 10 cases of facial numbness, 1 case of intracranial infection, and 1 case of high-frequency hearing loss. The accuracy recognition of anatomic variation of the SPVC is crucial for the

  2. Investigation of Hematologic and Pathologic Response to Decompression.

    Science.gov (United States)

    1978-05-10

    in tadpole and very young kangaroos . Am. J. Physiol. 120:59—74 , 1937. 12. D’ C’~~~’ B.G. and Swanson , H. Bubble free decompression of blood samples...1955. 24. Takeda , Y. Studies of the metabol i~~ 5 and distribution of fibrino— gen in healthy men with autologous I-labe led fibrinogen. J. Clin...this connective tissue protein. However , the metabolism of bone collagen is affected by hormonal control (l0; 3l) and vitamin influences (3 ;ll). It

  3. Clinical outcomes of radiotherapy as initial local therapy for Graves’ ophthalmopathy and predictors of the need for post-radiotherapy decompressive surgery

    International Nuclear Information System (INIS)

    Prabhu, Roshan S; Liebman, Lang; Wojno, Ted; Hayek, Brent; Hall, William A; Crocker, Ian

    2012-01-01

    The optimal initial local treatment for patients with Graves’ ophthalmopathy (GO) is not fully characterized. The purpose of this retrospective study is to describe the clinical outcomes of RT as initial local therapy for GO and define predictors of the need for post-RT salvage bony decompressive surgery. 91 patients with active GO and without prior surgery were treated with RT as initial local therapy between 01/1999 and 12/2010, with a median follow-up period of 18.3 months (range 3.7 - 142 months). RT dose was 24 Gy in 12 fractions. 44 patients (48.4%) had prior use of steroids, with 31 (34.1%) being on steroids at the initiation of RT. The most common presenting symptoms were diplopia (79%), proptosis (71%) and soft tissue signs (62%). 84 patients (92.3%) experienced stabilization or improvement of GO symptoms. 58 patients (64%) experienced improvement in their symptoms. 19 patients (20.9%) underwent salvage post-RT bony decompressive surgery. Smoking status and total symptom score at 4 months were independent predictors of post-RT bony decompression with odds ratios of 3.23 (95% CI 1.03 – 10.2) and 1.59 (95% CI 1.06 – 2.4), respectively. Persistent objective vision loss at 4 months post-RT was the most important symptom type in predicting salvage decompression. Chronic dry eye occurred in 9 patients (9.9%) and cataracts developed in 4 patients (4.4%). RT is effective and well tolerated as initial local therapy for active GO, with only 21% of patients requiring decompressive surgery post RT. Most patients experience stabilization or improvement of GO symptoms, but moderate to significant response occurs in the minority of patients. Smoking status and total symptom severity at 4 months, primarily persistent objective vision loss, are the primary determinants of the need for post-RT salvage bony decompression. Patients who smoke or present with predominantly vision loss symptoms should be advised as to their lower likelihood of symptomatic response to RT

  4. Surgical decompression for space-occupying cerebral infarction (the Hemicraniectomy After Middle Cerebral Artery infarction with Life-threatening Edema Trial [HAMLET]): a multicentre, open, randomised trial.

    Science.gov (United States)

    Hofmeijer, Jeannette; Kappelle, L Jaap; Algra, Ale; Amelink, G Johan; van Gijn, Jan; van der Worp, H Bart

    2009-04-01

    Patients with space-occupying hemispheric infarctions have a poor prognosis, with case fatality rates of up to 80%. In a pooled analysis of randomised trials, surgical decompression within 48 h of stroke onset reduced case fatality and improved functional outcome; however, the effect of surgery after longer intervals is unknown. The aim of HAMLET was to assess the effect of decompressive surgery within 4 days of the onset of symptoms in patients with space-occupying hemispheric infarction. Patients with space-occupying hemispheric infarction were randomly assigned within 4 days of stroke onset to surgical decompression or best medical treatment. The primary outcome measure was the modified Rankin scale (mRS) score at 1 year, which was dichotomised between good (0-3) and poor (4-6) outcome. Other outcome measures were the dichotomy of mRS score between 4 and 5, case fatality, quality of life, and symptoms of depression. Analysis was by intention to treat. This trial is registered, ISRCTN94237756. Between November, 2002, and October, 2007, 64 patients were included; 32 were randomly assigned to surgical decompression and 32 to best medical treatment. Surgical decompression had no effect on the primary outcome measure (absolute risk reduction [ARR] 0%, 95% CI -21 to 21) but did reduce case fatality (ARR 38%, 15 to 60). In a meta-analysis of patients in DECIMAL (DEcompressive Craniectomy In MALignant middle cerebral artery infarction), DESTINY (DEcompressive Surgery for the Treatment of malignant INfarction of the middle cerebral arterY), and HAMLET who were randomised within 48 h of stroke onset, surgical decompression reduced poor outcome (ARR 16%, -0.1 to 33) and case fatality (ARR 50%, 34 to 66). Surgical decompression reduces case fatality and poor outcome in patients with space-occupying infarctions who are treated within 48 h of stroke onset. There is no evidence that this operation improves functional outcome when it is delayed for up to 96 h after stroke onset

  5. The effect of partial portal decompression on portal blood flow and effective hepatic blood flow in man: a prospective study.

    Science.gov (United States)

    Rosemurgy, A S; McAllister, E W; Godellas, C V; Goode, S E; Albrink, M H; Fabri, P J

    1995-12-01

    With the advent of transjugular intrahepatic porta-systemic stent shunt and the wider application of the surgically placed small diameter prosthetic H-graft portacaval shunt (HGPCS), partial portal decompression in the treatment of portal hypertension has received increased attention. The clinical results supporting the use of partial portal decompression are its low incidence of variceal rehemorrhage due to decreased portal pressures and its low rate of hepatic failure, possibly due to maintenance of blood flow to the liver. Surprisingly, nothing is known about changes in portal hemodynamics and effective hepatic blood flow following partial portal decompression. To prospectively evaluate changes in portal hemodynamics and effective hepatic blood flow brought about by partial portal decompression, the following were determined in seven patients undergoing HGPCS: intraoperative pre- and postshunt portal vein pressures and portal vein-inferior vena cava pressure gradients, intraoperative pre- and postshunt portal vein flow, and pre- and postoperative effective hepatic blood flow. With HGPCS, portal vein pressures and portal vein-inferior vena cava pressure gradients decreased significantly, although portal pressures remained above normal. In contrast to the significant decreases in portal pressures, portal vein blood flow and effective hepatic blood flow do not decrease significantly. Changes in portal vein pressures and portal vein-inferior vena cava pressure gradients are great when compared to changes in portal vein flow and effective hepatic blood flow. Reduction of portal hypertension with concomitant maintenance of hepatic blood flow may explain why hepatic dysfunction is avoided following partial portal decompression.

  6. Macrovascular Decompression of the Brainstem and Cranial Nerves: Evolution of an Anteromedial Vertebrobasilar Artery Transposition Technique.

    Science.gov (United States)

    Choudhri, Omar; Connolly, Ian D; Lawton, Michael T

    2017-08-01

    Tortuous and dolichoectatic vertebrobasilar arteries can impinge on the brainstem and cranial nerves to cause compression syndromes. Transposition techniques are often required to decompress the brainstem with dolichoectatic pathology. We describe our evolution of an anteromedial transposition technique and its efficacy in decompressing the brainstem and relieving symptoms. To present the anteromedial vertebrobasilar artery transposition technique for macrovascular decompression of the brainstem and cranial nerves. All patients who underwent vertebrobasilar artery transposition were identified from the prospectively maintained database of the Vascular Neurosurgery service, and their medical records were reviewed retrospectively. The extent of arterial displacement was measured pre- and postoperatively on imaging. Vertebrobasilar arterial transposition and macrovascular decompression was performed in 12 patients. Evolution in technique was characterized by gradual preference for the far-lateral approach, use of a sling technique with muslin wrap, and an anteromedial direction of pull on the vertebrobasilar artery with clip-assisted tethering to the clival dura. With this technique, mean lateral displacement decreased from 6.6 mm in the first half of the series to 3.8 mm in the last half of the series, and mean anterior displacement increased from 0.8 to 2.5 mm, with corresponding increases in satisfaction and relief of symptoms. Compressive dolichoectatic pathology directed laterally into cranial nerves and posteriorly into the brainstem can be corrected with anteromedial transposition towards the clivus. Our technique accomplishes this anteromedial transposition from an inferolateral surgical approach through the vagoaccessory triangle, with sling fixation to clival dura using aneurysm clips. Copyright © 2017 by the Congress of Neurological Surgeons

  7. Decompression sickness in caisson workers

    Science.gov (United States)

    Ghawabi, Samir H. El; Mansour, Mohamed B.; Youssef, Fatma L.; Ghawabi, Mohamed H. El; Latif, Mohamed M. Abd El

    1971-01-01

    El Ghawabi, S. H., Mansour, M. B., Youssef, F. L., El Ghawabi, M. H., and Abd El Latif, M. M. (1971).Brit. J. industr. Med.,28, 323-329. Decompression sickness in caisson workers. An investigation of 55 bridge construction workers is reported. The overall bends rate was 0·97%. (The term `bends' as used in this study is defined in the paper.) Chokes were encountered in 67·27% of workers. A clinical, haematological, and radiological study was performed. Definite bony changes were found in 43·6% of all workers; 91·6% of these had lesions around the elbow. The presence of dense areas in the neck of the scapula is reported in two cases for the first time. The relatively high haematocrit value is thought to play a part in the pathogenesis of bone infarction through its relation with blood viscosity. Images PMID:5124832

  8. Developments in time-resolved high pressure x-ray diffraction using rapid compression and decompression

    International Nuclear Information System (INIS)

    Smith, Jesse S.; Sinogeikin, Stanislav V.; Lin, Chuanlong; Rod, Eric; Bai, Ligang; Shen, Guoyin

    2015-01-01

    Complementary advances in high pressure research apparatus and techniques make it possible to carry out time-resolved high pressure research using what would customarily be considered static high pressure apparatus. This work specifically explores time-resolved high pressure x-ray diffraction with rapid compression and/or decompression of a sample in a diamond anvil cell. Key aspects of the synchrotron beamline and ancillary equipment are presented, including source considerations, rapid (de)compression apparatus, high frequency imaging detectors, and software suitable for processing large volumes of data. A number of examples are presented, including fast equation of state measurements, compression rate dependent synthesis of metastable states in silicon and germanium, and ultrahigh compression rates using a piezoelectric driven diamond anvil cell

  9. Bunch decompression for laser-plasma driven free-electron laser demonstration schemes

    Directory of Open Access Journals (Sweden)

    T. Seggebrock

    2013-07-01

    Full Text Available X-ray free-electron lasers (FELs require a very high electron beam quality in terms of emittance and energy spread. Since 2004 high quality electrons produced by laser-wakefield accelerators have been demonstrated, but the electron quality up to now did not allow the operation of a compact x-ray FEL using these electrons. Maier et al. [Phys. Rev. X 2, 031019 (2012PRXHAE2160-330810.1103/PhysRevX.2.031019] suggested a concept for a proof-of-principle experiment allowing FEL operation in the vacuum ultraviolet range based on an optimized undulator and bunch decompression using electron bunches from a laser-plasma accelerator as currently available. In this paper we discuss in more detail how a chicane can be used as a bunch stretcher instead of a bunch compressor to allow the operation of a laser-wakefield accelerator driven FEL using currently available electrons. A scaling characterizing the impact of bunch decompression on the gain length is derived and the feasibility of the concept is tested numerically in a demanding scenario.

  10. Joint pain and Doppler-detectable bubbles in altitude (Hypobaric) decompression

    Science.gov (United States)

    Powell, Michael R.

    1993-01-01

    The observation that altitude decompression sickness (DCS) is associated with pain in the lower extremities is not new, although it is not a consistent finding. DCS in divers is generally in the upper body, an effect often attributed to non-loading of the body while immersed. In caisson workers, DCS is reported more in the lower extremities. Surprisingly, many researchers do not mention the location of DCS joint pain, apparently considering it to be random. This is not the case for the tissue ratios encountered in studying decompression associated with simulated EVA. In NASA/JSC tests, altitude DCS generally presented first in either the ankle, knee, or hip (83 percent = 73/88). There was a definite statistical relation between the maximum Spencer precordial Doppler Grade and the incidence of DCS in the extremity, although this is not meant to imply a casual relation between circulating gas bubbles and joint pain. The risk of DCS with Grade 4 was considerably higher than that of Grades 0 to 3. The DCS risk was independent of the 'tissue ratio.' There was a predominance of lower extremity DCS even when exercise was performed with the upper body. The reason for these locations we hypothesize to be attributed to the formation of tissue gas micronuclei from kinetic and tensile forces (stress-assisted nucleation) and are the result of the individuals ambulating in a 1g environment. Additionally, since these showers of Doppler bubbles can persist for hours, it is difficult to imagine that they are emanating solely from tendons and ligaments, the supposed site of joint pain. This follows from Henry's law linking the volume of joint tissue (the solvent) and the solubility coefficient of inert gas; there is volumetrically insufficient connective tissue to produce the prolonged release of gas bubbles. If gas bubbles are spawned and released from connective tissue, their volume is increased by those from muscle tissue. Therefore, the nexus between Doppler-detectable gas

  11. Evaluation of Melt Behavior with initial Melt Velocity under SFR Severe Accidents

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Hyo; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of); Jerng, Dong Wook [Chung-Ang Univ, Seoul (Korea, Republic of)

    2015-10-15

    In the current Korean sodium-cooled fast reactor (SFR) program, early dispersion of the molten metallic fuel within a subchannel is suggested as one of the inherent safety strategies for the initiating phase of hypothetical core disruptive accident (HCDA). The safety strategy provides negative reactivity driven by the melt dispersal, so it could reduce the possibility of the recriticality event under a severe triple or more fault scenario for SFR. Since the behavior of the melt dispersion is unpredictable, it depends on the accident condition, particularly core region. While the voided coolant channel region is usually developed in the inner core, the unvoided coolant channel region is formed in the outer core. It is important to confirm the fuel dispersion with the core region, but there are not sufficient existing studies for them. From the existing studies, the coolant vapor pressure is considered as one of driving force to move the melt towards outside of the core. There is a complexity of the phenomena during intermixing of the melt with the coolant after the horizontal melt injections. It is too difficult to understand the several combined mechanisms related to the melt dispersion and the fragmentation. Thus, it could be worthwhile to study the horizontal melt injections at lower temperature as a preliminary study in order to identify the melt dispersion phenomena. For this reason, it is required to clarify whether the coolant vapor pressure is the driving force of the melt dispersion with the core region. The specific conditions to be well dispersed for the molten metallic fuel were discussed in the experiments with the simulant materials. The each melt behavior was compared to evaluate the melt dispersion under the coolant void condition and the boiling condition. As the results, the following results are remarked: 1. The upward melt dispersion did not occur for a given melt and coolant temperature in the nonboiling range. Over current range of conditions

  12. Evaluation of Melt Behavior with initial Melt Velocity under SFR Severe Accidents

    International Nuclear Information System (INIS)

    Heo, Hyo; Bang, In Cheol; Jerng, Dong Wook

    2015-01-01

    In the current Korean sodium-cooled fast reactor (SFR) program, early dispersion of the molten metallic fuel within a subchannel is suggested as one of the inherent safety strategies for the initiating phase of hypothetical core disruptive accident (HCDA). The safety strategy provides negative reactivity driven by the melt dispersal, so it could reduce the possibility of the recriticality event under a severe triple or more fault scenario for SFR. Since the behavior of the melt dispersion is unpredictable, it depends on the accident condition, particularly core region. While the voided coolant channel region is usually developed in the inner core, the unvoided coolant channel region is formed in the outer core. It is important to confirm the fuel dispersion with the core region, but there are not sufficient existing studies for them. From the existing studies, the coolant vapor pressure is considered as one of driving force to move the melt towards outside of the core. There is a complexity of the phenomena during intermixing of the melt with the coolant after the horizontal melt injections. It is too difficult to understand the several combined mechanisms related to the melt dispersion and the fragmentation. Thus, it could be worthwhile to study the horizontal melt injections at lower temperature as a preliminary study in order to identify the melt dispersion phenomena. For this reason, it is required to clarify whether the coolant vapor pressure is the driving force of the melt dispersion with the core region. The specific conditions to be well dispersed for the molten metallic fuel were discussed in the experiments with the simulant materials. The each melt behavior was compared to evaluate the melt dispersion under the coolant void condition and the boiling condition. As the results, the following results are remarked: 1. The upward melt dispersion did not occur for a given melt and coolant temperature in the nonboiling range. Over current range of conditions

  13. Reducing intraocular-pressure spike after intravitreal-bevacizumab injection with ocular decompression using a sterile cotton swab soaked in proparacaine 0.5%: A quasi-experimental study.

    Science.gov (United States)

    Qureshi, Naveed A; Mansoor, Hassan; Ahmad, Sabihuddin; Zafar, Sarah; Asif, Muhammad

    2016-01-01

    The study was conducted to determine the effect of preinjection ocular decompression by a cotton swab soaked in local anesthetic on the immediate postinjection rise in intraocular pressure (IOP) after intravitreal bevacizumab (IVB). A nonrandomized, quasi-experimental interventional study was conducted at Al-Shifa Trust Eye Hospital, Pakistan, from August 1, 2013 to July 31, 2014. One hundred ( n = 100) patients receiving 0.05-mL IVB injection for the first time were assigned to two preinjection anesthetic methods: one with ocular decompression using a sterile cotton swab soaked in proparacaine 0.5%, and the other without ocular decompression using proparacaine 0.5% eyedrops. The IOP was recorded in the eye receiving IVB at three time intervals: Time 1 (preinjection), Time 2 (immediately after injection), and Time 3 (30 minutes after injection). There was a significant difference in the mean IOP change (between Time 1 and Time 2) for the group injected with ocular decompression [ M = 1.00, standard deviation (SD) = 1.47] and the group injected without ocular decompression ( M = 5.00, SD = 2.38; t (68) = 9.761, p 0.5% experience significantly lower postinjection IOP spike, and that too for a considerably shorter duration as compared to those receiving IVB without ocular decompression.

  14. Magma degassing triggered by static decompression at Kīlauea Volcano, Hawai‘i

    Science.gov (United States)

    Poland, Michael P.; Jeff, Sutton A.; Gerlach, Terrence M.

    2009-01-01

    During mid-June 2007, the summit of Kīlauea Volcano, Hawai‘i, deflated rapidly as magma drained from the subsurface to feed an east rift zone intrusion and eruption. Coincident with the deflation, summit SO2 emission rates rose by a factor of four before decaying to background levels over several weeks. We propose that SO2 release was triggered by static decompression caused by magma withdrawal from Kīlauea's shallow summit reservoir. Models of the deflation suggest a pressure drop of 0.5–3 MPa, which is sufficient to trigger exsolution of the observed excess SO2 from a relatively small volume of magma at the modeled source depth beneath Kīlauea's summit. Static decompression may also explain other episodes of deflation accompanied by heightened gas emission, including the precursory phases of Kīlauea's 2008 summit eruption. Hazards associated with unexpected volcanic gas emission argue for increased awareness of magma reservoir pressure fluctuations.

  15. Decompressive craniectomy in aneurysmal subarachnoid haemorrhage for hematoma or oedema versus secondary infarction

    NARCIS (Netherlands)

    Goedemans, Taco; Verbaan, Dagmar; Coert, Bert A.; Sprengers, Marieke E. S.; van den Berg, René; Vandertop, W. Peter; van den Munckhof, Pepijn

    2017-01-01

    Decompressive craniectomy (DC) has been proposed as lifesaving treatment in aneurysmal subarachnoid haemorrhage (aSAH) patients with elevated intracranial pressure (ICP). However, data is sparse and controversy exists whether the underlying cause of elevated ICP influences neurological outcome. The

  16. Tension pneumothorax secondary to automatic mechanical compression decompression device.

    Science.gov (United States)

    Hutchings, A C; Darcy, K J; Cumberbatch, G L A

    2009-02-01

    The details are presented of the first published case of a tension pneumothorax induced by an automatic compression-decompression (ACD) device during cardiac arrest. An elderly patient collapsed with back pain and, on arrival of the crew, was in pulseless electrical activity (PEA) arrest. He was promptly intubated and correct placement of the endotracheal tube was confirmed by noting equal air entry bilaterally and the ACD device applied. On the way to the hospital he was noted to have absent breath sounds on the left without any change in the position of the endotracheal tube. Needle decompression of the left chest caused a hiss of air but the patient remained in PEA. Intercostal drain insertion in the emergency department released a large quantity of air from his left chest but without any change in his condition. Post-mortem examination revealed a ruptured abdominal aortic aneurysm as the cause of death. Multiple left rib fractures and a left lung laceration secondary to the use of the ACD device were also noted, although the pathologist felt that the tension pneumothorax had not contributed to the patient's death. It is recommended that a simple or tension pneumothorax should be considered when there is unilateral absence of breath sounds in addition to endobronchial intubation if an ACD device is being used.

  17. Laser Disc Decompression In Emam Khomeini Hospital 1996-1999

    Directory of Open Access Journals (Sweden)

    Ghaffar Poor. M

    2002-07-01

    Full Text Available Low back pain is among the most frequent medical complaints and a major public health problem. 1.7 percent of cases are caused by herniated disc, 20 percent of which require interventional treatment. Percutaneous laser disc decompression (P.L.DD can be considered as an effective therapeutic alternative in certain cases."nMaterials and Methods: To determine the efficacy of this method in Iran in patient's with low back pain due to disc herniation, 40 patients according to medical history, physical examination and MRI findings were selected for this study. Patients who had canal stenosis, marginal, osteophyte, advanced disc dehydration, ruptured posterior ligament and other contraindication were excluded. CT scan was used only for needle navigation. After proper positioning of needle, nucleous pulposus was evapourated with Nd-YAG laser. Total energy was 1200-1600j. The procedure was done out patient and follow up has been done at 1 day, 1 week, 1,3, 6 and 12 months."nResults: There was no serious complication. 80 percent of patients in one-year follow up showed significant clinical improvement."nConclusion: Our findings suggests that percutaneous laser disc decompression can be considered as an effective alternative method of treatment for disc herniation and patient selection is the critical factor which determines success rate.

  18. Microsurgical Decompression of the Cochlear Nerve to Treat Disabling Tinnitus via an Endoscope-Assisted Retrosigmoid Approach: The Padua Experience.

    Science.gov (United States)

    Di Stadio, Arianna; Colangeli, Roberta; Dipietro, Laura; Martini, Alessandro; Parrino, Daniela; Nardello, Ennio; D'Avella, Domenico; Zanoletti, Elisabetta

    2018-05-01

    The use of surgical cochlear nerve decompression is controversial. This study aimed at investigating the safety and validity of microsurgical decompression via an endoscope-assisted retrosigmoid approach to treat tinnitus in patients with neurovascular compression of the cochlear nerve. Three patients with disabling tinnitus resulting from a loop in the internal auditory canal were evaluated with magnetic resonance imaging and tests of pure tone auditory, tinnitus, and auditory brain response (ABR) to identify the features of the cochlear nerve involvement. We observed a loop with a caliber greater than 0.8 mm in all patients. Patients were treated via an endoscope-assisted retrosigmoid microsurgical decompression. After surgery, none of the patients reported short-term or long-term complications. After surgery, tinnitus resolved immediately in 2 patients, whereas in the other patient symptoms persisted although they improved; in all patients, hearing was preserved and ABR improved. Microsurgical decompression via endoscope-assisted retrosigmoid approach is a promising, safe, and valid procedure for treating tinnitus caused by cochlear nerve compression. This procedure should be considered in patients with disabling tinnitus who have altered ABR and a loop that has a caliber greater than 0.8 mm and is in contact with the cochlear nerve. Copyright © 2018 Elsevier Inc. All rights reserved.

  19. Results of treatment in patients with non traumatic avascular necrosis of the femoral head by monitor assisted core decompression

    International Nuclear Information System (INIS)

    Piperovski, T.

    2001-01-01

    The authors tried to evaluate the results of treatment in 32 patients (39 hips) with non-traumatic avascular necrosis (AVN) of the femoral head by monitor assisted core decompression. Average age - 44 years, 19 were male and 13 female. 7 patients had bilateral involvement. The diagnosis AVN has been made by anteroposterior and lateral conventional radiographs bone scintigraphy and MRI. It is also done histopathological examinations of the specimens taken during the operation in order to confirm the primary diagnosis. It is established early diagnosis in stage I, stage IIA and IIB (the modified staging system of Ficat and Arlet is used, in combination with the system of Steinberg at al.) All patients have been treated by core decompression. The operative technique used is modified Phemister, which is similar to Ficat- Arlet. After the operation periodically x-ray and MRI investigations are done. The mean follow up time is 4 years. 79.37% of the hips showed radiographic and MRI stabilization within 2-4 years after core decompression. In 10.25% the results are moderate and in the rest (10.25%) total or bi-polar hip prosthesis have been implanted. The benefit of core decompression in patients with non-traumatic avascular necrosis of the femoral head is justified

  20. Endoscopic resection of acetabular screw tip to decompress sciatic nerve following total hip arthroplasty.

    Science.gov (United States)

    Yoon, Sun-Jung; Park, Myung-Sik; Matsuda, Dean K; Choi, Yun Ho

    2018-06-04

    Sciatic nerve injuries following total hip arthroplasty are disabling complications. Although degrees of injury are variable from neuropraxia to neurotmesis, mechanical irritation of sciatic nerve might be occurred by protruding hardware. This case shows endoscopic decompression for protruded acetabular screw irritating sciatic nerve, the techniques described herein may permit broader arthroscopic/endoscopic applications for management of complications after reconstructive hip surgery. An 80-year-old man complained of severe pain and paresthesias following acetabular component revision surgery. Physical findings included right buttock pain with radiating pain to lower extremity. Radiographs and computed tomography imaging showed that the sharp end of protruded screw invaded greater sciatic foramen anterior to posterior and distal to proximal direction at sciatic notch level. A protruding tip of the acetabular screw at the sciatic notch was decompressed by use of techniques gained from experience performing endoscopic sciatic nerve decompression. The pre-operative pain and paresthesias resolved post-operatively after recovering from anesthesia. This case report describes the first documented endoscopic resection of the tip of the acetabular screw irritating sciatic nerve after total hip arthroplasty. If endoscopic resection of an offending acetabular screw can be performed in a safe and minimally invasive manner, one can envision a future expansion of the role of hip arthroscopic surgery in several complications management after total hip arthroplasty.

  1. Experimental results for TiO2 melting and release using cold crucible melting

    International Nuclear Information System (INIS)

    Hong, S. W.; Min, B. T.; Park, I. G.; Kim, H. D.

    2000-01-01

    To simulate the severe accident phenomena using the real reactor material which melting point is about 2,800K, the melting and release method for materials with high melting point should be developed. This paper discusses the test results for TiO 2 materials using the cold crucible melting method to study the melting and release method of actual corium. To melt and release of few kg of TiO2, the experimental facility is manufactured through proper selection of design parameters such as frequency and capacity of R.F generator, crucible size and capacity of coolant. The melting and release of TiO 2 has been successfully performed in the cold crucible of 15cm in inner diameter and 30cm in height with 30kW RF power generator of 370 KHz. In the melt delivery experiment, about 2.6kg of molten TiO2, 60% of initial charged mass, is released. Rest of it is remained in the watercage in form of the rubble crust formed at the top of crucible and melt crust formed at the interface between the water-cage and melt. Especially, in the melt release test, the location of the working coil is important to make the thin crust at the bottom of the crucible

  2. Direct fabrication through electron beam melting technology of custom cranial implants designed in a PHANToM-based haptic environment

    International Nuclear Information System (INIS)

    Mazzoli, Alida; Germani, Michele; Raffaeli, Roberto

    2009-01-01

    Repairing critical human skull injuries requires the production and use of customized cranial implants and involves the integration of computer aided design and manufacturing (CAD and CAM). The main causes for large cranial defects are trauma, cranial tumors, infected craniotomy bone flaps and external neurosurgical decompression. The success of reconstructive cranial surgery depends upon: the preoperative evaluation of the defect, the design and manufacturing of the implant, and the skill of the operating surgeon. Cranial implant design is usually carried out manually using CAD although this process is very time-consuming and the quality of the end product depends wholly upon the skill of the operator. This paper presents an alternative automated method for the design of custom-made cranial plates in a PHANToM ® -based haptic environment, and their direct fabrication in biocompatible metal using electron beam melting (EBM) technology.

  3. Energy Saving Melting and Revert Reduction Technology (E-SMARRT): Melting Efficiency Improvement

    Energy Technology Data Exchange (ETDEWEB)

    Principal Investigator Kent Peaslee; Co-PI’s: Von Richards, Jeffrey Smith

    2012-07-31

    Steel foundries melt recycled scrap in electric furnaces and typically consume 35-100% excess energy from the theoretical energy requirement required to pour metal castings. This excess melting energy is multiplied by yield losses during casting and finishing operations resulting in the embodied energy in a cast product typically being three to six times the theoretical energy requirement. The purpose of this research project was to study steel foundry melting operations to understand energy use and requirements for casting operations, define variations in energy consumption, determine technologies and practices that are successful in reducing melting energy and develop new melting techniques and tools to improve the energy efficiency of melting in steel foundry operations.

  4. MELT-IIIB: an updated version of the melt code

    International Nuclear Information System (INIS)

    Tabb, K.K.; Lewis, C.H.; O'Dell, L.D.; Padilla, A. Jr.; Smith, D.E.; Wilburn, N.P.

    1979-04-01

    The MELT series is a reactor modeling code designed to investigate a wide variety of hypothetical accident conditions, particularly the transient overpower sequence. MELT-IIIB is the latest in the series

  5. Evaluation of Outcome of Posterior Decompression and Instrumented Fusion in Lumbar and Lumbosacral Tuberculosis.

    Science.gov (United States)

    Jain, Akshay; Jain, Ravikant; Kiyawat, Vivek

    2016-09-01

    For surgical treatment of lumbar and lumbosacral tuberculosis, the anterior approach has been the most popular approach because it allows direct access to the infected tissue, thereby providing good decompression. However, anterior fixation is not strong, and graft failure and loss of correction are frequent complications. The posterior approach allows circumferential decompression of neural elements along with three-column fixation attained via pedicle screws by the same approach. The purpose of this study was to evaluate the outcome (functional, neurological, and radiological) in patients with lumbar and lumbosacral tuberculosis operated through the posterior approach. Twenty-eight patients were diagnosed with tuberculosis of the lumbar and lumbosacral region from August 2012 to August 2013. Of these, 13 patients had progressive neurological deterioration or increasing back pain despite conservative measures and underwent posterior decompression and pedicle screw fixation with posterolateral fusion. Antitubercular therapy was given till signs of radiological healing were evident (9 to 16 months). Functional outcome (visual analogue scale [VAS] score for back pain), neurological recovery (Frankel grading), and radiological improvement were evaluated preoperatively, immediately postoperatively and 3 months, 6 months, and 1 year postoperatively. The mean VAS score for back pain improved from 7.89 (range, 9 to 7) preoperatively to 2.2 (range, 3 to 1) at 1-year follow-up. Frankel grading was grade B in 3, grade C in 7, and grade D in 3 patients preoperatively, which improved to grade D in 7 and grade E in 6 patients at the last follow-up. Radiological healing was evident in the form of reappearance of trabeculae formation, resolution of pus, fatty marrow replacement, and bony fusion in all patients. The mean correction of segmental kyphosis was 9.85° postoperatively. The mean loss of correction at final follow-up was 3.15°. Posterior decompression with instrumented

  6. Coupled petrological-geodynamical modeling of a compositionally heterogeneous mantle plume

    Science.gov (United States)

    Rummel, Lisa; Kaus, Boris J. P.; White, Richard W.; Mertz, Dieter F.; Yang, Jianfeng; Baumann, Tobias S.

    2018-01-01

    Self-consistent geodynamic modeling that includes melting is challenging as the chemistry of the source rocks continuously changes as a result of melt extraction. Here, we describe a new method to study the interaction between physical and chemical processes in an uprising heterogeneous mantle plume by combining a geodynamic code with a thermodynamic modeling approach for magma generation and evolution. We pre-computed hundreds of phase diagrams, each of them for a different chemical system. After melt is extracted, the phase diagram with the closest bulk rock chemistry to the depleted source rock is updated locally. The petrological evolution of rocks is tracked via evolving chemical compositions of source rocks and extracted melts using twelve oxide compositional parameters. As a result, a wide variety of newly generated magmatic rocks can in principle be produced from mantle rocks with different degrees of depletion. The results show that a variable geothermal gradient, the amount of extracted melt and plume excess temperature affect the magma production and chemistry by influencing decompression melting and the depletion of rocks. Decompression melting is facilitated by a shallower lithosphere-asthenosphere boundary and an increase in the amount of extracted magma is induced by a lower critical melt fraction for melt extraction and/or higher plume temperatures. Increasing critical melt fractions activates the extraction of melts triggered by decompression at a later stage and slows down the depletion process from the metasomatized mantle. Melt compositional trends are used to determine melting related processes by focusing on K2O/Na2O ratio as indicator for the rock type that has been molten. Thus, a step-like-profile in K2O/Na2O might be explained by a transition between melting metasomatized and pyrolitic mantle components reproducible through numerical modeling of a heterogeneous asthenospheric mantle source. A potential application of the developed method

  7. Lithosphere destabilization by melt percolation during pre-oceanic rifting: Evidence from Alpine-Apennine ophiolitic peridotites

    Science.gov (United States)

    Piccardo, Giovanni; Ranalli, Giorgio

    2017-04-01

    Orogenic peridotites from Alpine-Apennine ophiolite Massifs (Lanzo, Voltri, External and Internal Ligurides, - NW Italy, and Mt. Maggiore - Corsica) derive from the mantle lithosphere of the Ligurian Tethys. Field/structural and petrologic/geochemical studies provide constraints on the evolution of the lithospheric mantle during pre-oceanic passive rifting of the late Jurassic Ligurian Tethys ocean. Continental rifting by far-field tectonic forces induced extension of the lithosphere by means of km-scale extensional shear zones that developed before infiltration of melts from the asthenosphere (Piccardo and Vissers, 2007). After significant thinning of the lithosphere, the passively upwelling asthenosphere underwent spinel-facies decompression melting along the axial zone of the extensional system. Silica-undersaturated melt fractions percolated through the lithospheric mantle via diffuse/focused porous flow and interacted with the host peridotite through pyroxenes-dissolving/olivine-precipitating melt/rock reactions. Pyroxene dissolution and olivine precipitation modified the composition of the primary silica-undersaturated melts into derivative silica-saturated melts, while the host lithospheric spinel lherzolites were transformed into pyroxene-depleted/olivine-enriched reactive spinel harzburgites and dunites. The derivative liquids interacted through olivine-dissolving/orthopyroxene+plagioclase-crystallizing reactions with the host peridotites that were impregnated and refertilized (Piccardo et al., 2015). The saturated melts stagnated and crystallized in the shallow mantle lithosphere (as testified by diffuse interstitial crystallization of euhedral orthopyroxene and anhedral plagioclase) and locally ponded, forming orthopyroxene-rich/olivine-free gabbro-norite pods (Piccardo and Guarnieri, 2011). Reactive and impregnated peridotites are characterized by high equilibration temperatures (up to 1250 °C) even at low pressure, plagioclase-peridotite facies

  8. Tonsillar pulsatility before and after surgical decompression for children with Chiari malformation type 1: an application for true fast imaging with steady state precession

    International Nuclear Information System (INIS)

    Radmanesh, Alireza; Greenberg, Jacob K.; Smyth, Matthew D.; Limbrick, David D.; Chatterjee, Arindam; Sharma, Aseem

    2015-01-01

    We hypothesize that surgical decompression for Chiari malformation type 1 (CM-1) is associated with statistically significant decrease in tonsillar pulsatility and that the degree of pulsatility can be reliably assessed regardless of the experience level of the reader. An Institutional Review Board (IRB)-approved Health Insurance Portability and Accountability Act (HIPAA)-compliant retrospective study was performed on 22 children with CM-1 (8 males; mean age 11.4 years) who had cardiac-gated true-FISP sequence and phase-contrast cerebrospinal fluid (CSF) flow imaging as parts of routine magnetic resonance (MR) imaging before and after surgical decompression. The surgical technique (decompression with or without duraplasty) was recorded for each patient. Three independent radiologists with different experience levels assessed tonsillar pulsatility qualitatively and quantitatively and assessed peritonsillar CSF flow qualitatively. Results were analyzed. To evaluate reliability, Fleiss kappa for multiple raters on categorical variables and intra-class correlation for agreement in pulsatility ratings were calculated. After surgical decompression, the degree of tonsillar pulsatility appreciably decreased, confirmed by t test, both qualitatively (p values <0.001, <0.001, and 0.045 for three readers) and quantitatively (amount of decrease/p value for three readers 0.7 mm/<0.001, 0.7 mm/<0.001, and 0.5 mm/0.022). There was a better agreement among the readers in quantitative assessment of tonsillar pulsatility (kappa 0.753-0.834), compared to qualitative assessment of pulsatility (kappa 0.472-0.496) and qualitative assessment of flow (kappa 0.056 to 0.203). Posterior fossa decompression with duraplasty led to a larger decrease in tonsillar pulsatility, compared to posterior fossa decompression alone. Tonsillar pulsatility in CM-1 is significantly reduced after surgical decompression. Quantitative assessment of tonsillar pulsatility was more reliable across readers than

  9. Tonsillar pulsatility before and after surgical decompression for children with Chiari malformation type 1: an application for true fast imaging with steady state precession

    Energy Technology Data Exchange (ETDEWEB)

    Radmanesh, Alireza [University of California, San Francisco, Department of Radiology and Biomedical Imaging, San Francisco, CA (United States); Washington University School of Medicine, Mallinckrodt Institute of Radiology, St Louis, MO (United States); Greenberg, Jacob K.; Smyth, Matthew D.; Limbrick, David D. [Washington University School of Medicine, Department of Neurosurgery, St Louis, MO (United States); Chatterjee, Arindam; Sharma, Aseem [Washington University School of Medicine, Mallinckrodt Institute of Radiology, St Louis, MO (United States)

    2015-04-01

    We hypothesize that surgical decompression for Chiari malformation type 1 (CM-1) is associated with statistically significant decrease in tonsillar pulsatility and that the degree of pulsatility can be reliably assessed regardless of the experience level of the reader. An Institutional Review Board (IRB)-approved Health Insurance Portability and Accountability Act (HIPAA)-compliant retrospective study was performed on 22 children with CM-1 (8 males; mean age 11.4 years) who had cardiac-gated true-FISP sequence and phase-contrast cerebrospinal fluid (CSF) flow imaging as parts of routine magnetic resonance (MR) imaging before and after surgical decompression. The surgical technique (decompression with or without duraplasty) was recorded for each patient. Three independent radiologists with different experience levels assessed tonsillar pulsatility qualitatively and quantitatively and assessed peritonsillar CSF flow qualitatively. Results were analyzed. To evaluate reliability, Fleiss kappa for multiple raters on categorical variables and intra-class correlation for agreement in pulsatility ratings were calculated. After surgical decompression, the degree of tonsillar pulsatility appreciably decreased, confirmed by t test, both qualitatively (p values <0.001, <0.001, and 0.045 for three readers) and quantitatively (amount of decrease/p value for three readers 0.7 mm/<0.001, 0.7 mm/<0.001, and 0.5 mm/0.022). There was a better agreement among the readers in quantitative assessment of tonsillar pulsatility (kappa 0.753-0.834), compared to qualitative assessment of pulsatility (kappa 0.472-0.496) and qualitative assessment of flow (kappa 0.056 to 0.203). Posterior fossa decompression with duraplasty led to a larger decrease in tonsillar pulsatility, compared to posterior fossa decompression alone. Tonsillar pulsatility in CM-1 is significantly reduced after surgical decompression. Quantitative assessment of tonsillar pulsatility was more reliable across readers than

  10. Surgical decompression in endocrine orbitopathy. Visual evoked potential evaluation and effect on the optic nerve.

    Science.gov (United States)

    Clauser, Luigi C; Tieghi, Riccardo; Galie', Manlio; Franco, Filippo; Carinci, Francesco

    2012-10-01

    Endocrine orbitopathy (EO) represents the most frequent and important extrathyroidal stigma of Graves disease. This chronic autoimmune condition involves the orbital contents, including extraocular muscles, periorbital connective-fatty tissue and lacrimal gland. The increase of fat tissue and the enlargement of extraocular muscles within the bony confines of the orbit leads to proptosis, and in the most severe cases optic neuropathy, caused by compression and stretching of the optic nerve. The congestion and the pressure of the enlarged muscles, constrict the nerve and can lead to reduced sight or loss of vision with the so called "orbital apex syndrome". Generally surgical treatment of EO, based on fat and/or orbital wall expansion, is possible and effective in improving exophthalmos and diplopia. Since there are limited reports focussing on optic neuropathy recovery after fat and/or orbital walls decompression the Authors decided to perform a retrospective analysis on a series of patients affected by EO. The study population was composed of 10 patients affected by EO and presenting to the Unit of Cranio Maxillofacial Surgery, Center for Craniofacial Deformities & Orbital Surgery St. Anna Hospital and University, Ferrara, Italy, for evaluation and treatment. A complete Visual Evoked Potentials (VEP) evaluation was performed. There were seven women and three men with a median age of 55 years. Optic nerve VEP amplitude and latency were recorded as normal or pathological. Abnormal results were scored as moderate, mild and severe. Differences in VEP pre and post-operatively were recorded as present or absent (i.e. VEP Delta). Pearson chi square test was applied. There were 20 operated orbits. The first VEP evaluation was performed 3.2 months before surgery and post-operative VEP control was done after a mean of 18.7 months. Fat decompression was performed in all cases and eight patients had also bony decompression. VEP amplitude and latency were affected in 10 and 15

  11. Cloud screening and melt water detection over melting sea ice using AATSR/SLSTR

    Science.gov (United States)

    Istomina, Larysa; Heygster, Georg

    2014-05-01

    With the onset of melt in the Arctic Ocean, the fraction of melt water on sea ice, the melt pond fraction, increases. The consequences are: the reduced albedo of sea ice, increased transmittance of sea ice and affected heat balance of the system with more heat passing through the ice into the ocean, which facilitates further melting. The onset of melt, duration of melt season and melt pond fraction are good indicators of the climate state of the Arctic and its change. In the absence of reliable sea ice thickness retrievals in summer, melt pond fraction retrieval from satellite is in demand as input for GCM as an indicator of melt state of the sea ice. The retrieval of melt pond fraction with a moderate resolution radiometer as AATSR is, however, a non-trivial task due to a variety of subpixel surface types with very different optical properties, which give non-unique combinations if mixed. In this work this has been solved by employing additional information on the surface and air temperature of the pixel. In the current work, a concept of melt pond detection on sea ice is presented. The basis of the retrieval is the sensitivity of AATSR reflectance channels 550nm and 860nm to the amount of melt water on sea ice. The retrieval features extensive usage of a database of in situ surface albedo spectra. A tree of decisions is employed to select the feasible family of in situ spectra for the retrieval, depending on the melt stage of the surface. Reanalysis air temperature at the surface and brightness temperature measured by the satellite sensor are analyzed in order to evaluate the melting status of the surface. Case studies for FYI and MYI show plausible retrieved melt pond fractions, characteristic for both of the ice types. The developed retrieval can be used to process the historical AATSR (2002-2012) dataset, as well as for the SLSTR sensor onboard the future Sentinel-3 mission (scheduled for launch in 2015), to keep the continuity and obtain longer time sequence

  12. Needle Decompression in Appalachia Do Obese Patients Need Longer Needles?

    Directory of Open Access Journals (Sweden)

    Carter, Thomas Edward

    2013-11-01

    Full Text Available Introduction: Needle decompression of a tension pneumothorax can be a lifesaving procedure. It requires an adequate needle length to reach the chest wall to rapidly remove air. With adult obesity exceeding one third of the United States population in 2010, we sought to evaluate the proper catheter length that may result in a successful needle decompression procedure. Advance Trauma Life Support (ATLS currently recommends a 51 millimeter (mm needle, while the needles stocked in our emergency department are 46 mm. Given the obesity rates of our patient population, we hypothesize these needles would not have a tolerable success rate of 90%. Methods: We retrospectively reviewed 91 patient records that had computed tomography of the chest and measured the chest wall depth at the second intercostal space bilaterally. Results: We found that 46 mm needles would only be successful in 52.7% of our patient population, yet the ATLS recommended length of 51 mm has a success rate of 64.8%. Therefore, using a 64 mm needle would be successful in 79% percent of our patient population. Conclusion: Use of longer length needles for needle thoracostomy is essential given the extent of the nation’s adult obesity population. [West J Emerg Med. 2013;14(6:650-652.

  13. Evaluation of transcranial surgical decompression of the optic canal as a treatment option for traumatic optic neuropathy.

    Science.gov (United States)

    He, Zhenhua; Li, Qiang; Yuan, Jingmin; Zhang, Xinding; Gao, Ruiping; Han, Yanming; Yang, Wenzhen; Shi, Xuefeng; Lan, Zhengbo

    2015-07-01

    Traumatic optic neuropathy (TON) is a serious complication of head trauma, with the incidence rate ranging from 0.5% to 5%. The two treatment options widely practiced for TON are: (i) high-dose corticosteroid therapy and (ii) surgical decompression. However, till date, there is no consensus on the treatment protocol. This study aimed to evaluate the therapeutic efficacy of transcranial decompression of optic canal in TON patients. A total of 39 patients with visual loss resulting from TON between January 2005 and June 2013 were retrospectively reviewed for preoperative vision, preoperative image, visual evoked potential (VEP), surgical approach, postoperative visual acuity, complications, and follow-up results. All these patients underwent transcranial decompression of optic canal. During the three-month follow-up period, among the 39 patients, 21 showed an improvement in their eyesight, 6 recovered to standard logarithmic visual acuity chart "visible," 10 could count fingers, 2 could see hand movement, and 3 regained light sensation. Visual evoked potential could be used as an important preoperative and prognostic evaluation parameter for TON patients. Once TON was diagnosed, surgery is a promising therapeutic option, especially when a VEP wave is detected, irrespective of the HRCT scan findings. Operative time between trauma and operation is not necessary reference to assess the therapeutic effect of surgical decompression. The poor results of this procedure may be related to the severity of optic nerve injury. The patient's age is an important factor affecting the surgical outcomes. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Craniectomy-associated Progressive Extra-Axial Collections with Treated Hydrocephalus (CAPECTH): redefining a common complication of decompressive craniectomy.

    Science.gov (United States)

    Nalbach, Stephen V; Ropper, Alexander E; Dunn, Ian F; Gormley, William B

    2012-09-01

    Extra-axial fluid collections following decompressive craniectomy have been observed in a variety of patient populations. These collections have traditionally been thought to represent extra-axial signs of hydrocephalus, but they often occur even in settings where hydrocephalus has been optimally treated. This study aims to elucidate the phenomenon of extra-axial fluid collections after decompressive craniectomy in patients with treated hydrocephalus, in order to improve identification, classification, prevention and treatment. We retrospectively reviewed all patients at a single institution undergoing decompressive craniectomy for refractory intracranial pressure elevations from June 2007 through December 2009. We identified 39 patients by reviewing clinical reports and imaging. Any patient who died on or prior to the third post-operative day (POD) was excluded. The analysis focused on patients with extra-axial collections and treated hydrocephalus. Twenty-one of 34 (62%) patients developed extra-axial collections and 18 of these developed collections despite ventricular drainage. Subgroup analysis revealed that seven of seven patients (100%) with subarachnoid hemorrhage, and 11 of 14 (79%) with traumatic brain injury developed collections. Extra-axial collections may develop after decompressive craniectomy despite aggressive treatment of communicating hydrocephalus. In these patients, the term "external hydrocephalus" does not appropriately capture the relevant pathophysiology. Instead, we define a new phenomenon, "Craniectomy-associated Progressive Extra-Axial Collections with Treated Hydrocephalus" (CAPECTH), as progressive collections despite aggressive cerebral spinal fluid (CSF) drainage. Our data indicate that early cranioplasty can help prevent the formation and worsening of this condition, presumably by returning normal CSF dynamics. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. The effect of rapid and sustained decompression on barotrauma in juvenile brook lamprey and Pacific lamprey: implications for passage at hydroelectric facilities

    Energy Technology Data Exchange (ETDEWEB)

    Colotelo, Alison HA; Pflugrath, Brett D.; Brown, Richard S.; Brauner, Colin J.; Mueller, Robert P.; Carlson, Thomas J.; Deng, Zhiqun; Ahmann, Martin L.; Trumbo, Bradly A.

    2012-10-01

    Fish passing downstream through hydroelectric facilities may pass through hydroturbines where they experience a rapid decrease in barometric pressure as they pass by turbine blades, which can lead to barotraumas including swim bladder rupture, exopthalmia, emboli, and hemorrhaging. In juvenile Chinook salmon, the main mechanism for injury is thought to be expansion of existing gases (particularly those present in the swim bladder) and the rupture of the swim bladder ultimately leading to exopthalmia, emboli and hemorrhaging. In fish that lack a swim bladder, such as lamprey, the rate and severity of barotraumas due to rapid decompression may be reduced however; this has yet to be extensively studied. Another mechanism for barotrauma can be gases coming out of solution and the rate of this occurrence may vary among species. In this study, juvenile brook and Pacific lamprey acclimated to 146.2 kPa (equivalent to a depth of 4.6 m) were subjected to rapid (<1 sec; brook lamprey only) or sustained decompression (17 minutes) to a very low pressure (13.8 kPa) using a protocol previously applied to juvenile Chinook salmon. No mortality or evidence of barotraumas, as indicated by the presence of hemorrhages, emboli or exopthalmia, were observed during rapid or sustained decompression, nor following recovery for up to 120 h following sustained decompression. In contrast, mortality or injury would be expected for 97.5% of juvenile Chinook salmon exposed to a similar rapid decompression to these very low pressures. Additionally, juvenile Chinook salmon experiencing sustained decompression died within 7 minutes, accompanied by emboli in the fins and gills and hemorrhaging in the tissues. Thus, juvenile lamprey may not be susceptible to barotraumas associated with hydroturbine passage to the same degree as juvenile salmonids, and management of these species should be tailored to their specific morphological and physiological characteristics.

  16. A Good Short-term Outcome in Delayed Decompression of Cauda Equina Syndrome in Klebsiella pneumoniae Spinal Epidural Abscess: A Case Report

    Directory of Open Access Journals (Sweden)

    Hanifah J

    2017-07-01

    Full Text Available Spinal epidural abscess is a severe, generally pyogenic, infection of the epidural space of spinal cord or cauda equina. The swelling caused by the abscess leads to compression or vascular disruption of neurological structures that requires urgent surgical decompression to avoid significant permanent disability. We share a rare case of Klebsiella pneumoniae spinal epidural abscess secondary to haematogenous spread of previous lung infection that presented late at our centre with cauda equina syndrome that showed good short-term outcome in delayed decompression. A 50-year old female presented with one-week history of persistent low back pain with progressively worsening bilateral lower limb weakness for seven days and urinary retention associated with saddle anesthesia of 2-day duration. Magnetic resonance imaging with contrast of the lumbo-sacral region showed an intramuscular collection of abscess at left gluteus maximus and left multifidus muscle with a L3-L5 posteriorly placed extradural lesion enhancing peripherally on contrast, suggestive of epidural abscess that compressed the cauda equina. The pus was drained using the posterior lumbar approach. Tissue and pus culture revealed Klebsiella pneumoniae, suggestive of bacterial infection. The patient made immediate improvement of muscle power over bilateral lower limbs postoperative followed by ability to control micturition and defecation in the 4th post-operative day. A good short-term outcome in delayed decompression of cauda equine syndrome is extremely rare. Aggressive surgical decompression combined with antibiotic therapy led to good short-term outcome in this patient despite delayed decompression of more than 48 hours.

  17. Melting of Dense Sodium

    International Nuclear Information System (INIS)

    Gregoryanz, Eugene; Degtyareva, Olga; Hemley, Russell J.; Mao, Ho-kwang; Somayazulu, Maddury

    2005-01-01

    High-pressure high-temperature synchrotron diffraction measurements reveal a maximum on the melting curve of Na in the bcc phase at ∼31 GPa and 1000 K and a steep decrease in melting temperature in its fcc phase. The results extend the melting curve by an order of magnitude up to 130 GPa. Above 103 GPa, Na crystallizes in a sequence of phases with complex structures with unusually low melting temperatures, reaching 300 K at 118 GPa, and an increased melting temperature is observed with further increases in pressure

  18. A 2D double-porosity model for melting and melt migration beneath mid-oceanic ridges

    Science.gov (United States)

    Liu, B.; Liang, Y.; Parmentier, E.

    2017-12-01

    Several lines of evidence suggest that the melting and melt extraction region of the MORB mantle is heterogeneous consisting of an interconnected network of high permeability dunite channels in a low porosity harzburgite or lherzolite matrix. In principle, one can include channel formation into the tectonic-scale geodynamic models by solving conservation equations for a chemically reactive and viscously deformable porous medium. Such an approach eventually runs into computational limitations such as resolving fractal-like channels that have a spectrum of width. To better understand first order features of melting and melt-rock interaction beneath MOR, we have formulated a 2D double porosity model in which we treat the triangular melting region as two overlapping continua occupied by the low-porosity matrix and interconnected high-porosity channels. We use melt productivity derived from a thermodynamic model and melt suction rate to close our problem. We use a high-order accurate numerical method to solve the conservation equations in 2D for porosity, solid and melt velocities and concentrations of chemical tracers in the melting region. We carry out numerical simulations to systematically study effects of matrix-to-channel melt suction and spatially distributed channels on the distributions of porosity and trace element and isotopic ratios in the melting region. For near fractional melting with 10 vol% channel in the melting region, the flow field of the matrix melt follows closely to that of the solid because the small porosity (exchange between the melt and the solid. The smearing effect can be approximated by dispersion coefficient. For slowly diffusing trace elements (e.g., LREE and HFSE), the melt migration induced dispersion can be as effective as thermal diffusion. Therefore, sub-kilometer scale heterogeneities of Nd and Hf isotopes are significantly damped or homogenized in the melting region.

  19. Energy Saving Melting and Revert Reduction Technology: Melting Efficiency in Die Casting Operations

    Energy Technology Data Exchange (ETDEWEB)

    David Schwam

    2012-12-15

    This project addressed multiple aspects of the aluminum melting and handling in die casting operations, with the objective of increasing the energy efficiency while improving the quality of the molten metal. The efficiency of melting has always played an important role in the profitability of aluminum die casting operations. Consequently, die casters need to make careful choices in selecting and operating melting equipment and procedures. The capital cost of new melting equipment with higher efficiency can sometimes be recovered relatively fast when it replaces old melting equipment with lower efficiency. Upgrades designed to improve energy efficiency of existing equipment may be well justified. Energy efficiency is however not the only factor in optimizing melting operations. Melt losses and metal quality are also very important. Selection of melting equipment has to take into consideration the specific conditions at the die casting shop such as availability of floor space, average quantity of metal used as well as the ability to supply more metal during peaks in demand. In all these cases, it is essential to make informed decisions based on the best available data.

  20. Perforation and bacterial contamination of microscope covers in lumbar spinal decompressive surgery.

    Science.gov (United States)

    Osterhoff, Georg; Spirig, José; Klasen, Jürgen; Kuster, Stefan P; Zinkernagel, Annelies S; Sax, Hugo; Min, Kan

    2014-01-01

    To determine the integrity of microscope covers and bacterial contamination at the end of lumbar spinal decompressive surgery. A prospective study of 25 consecutive lumbar spinal decompressions with the use of a surgical microscope was performed. For detection of perforations, the microscope covers were filled with water at the end of surgery and the presence of water leakage in 3 zones (objective, ocular and control panel) was examined. For detection of bacterial contamination, swabs were taken from the covers at the same locations before and after surgery. Among the 25 covers, 1 (4%) perforation was observed and no association between perforation and bacterial contamination was seen; 3 (4%) of 75 smears from the 25 covers showed post-operative bacterial contamination, i.e. 2 in the ocular zone and 1 in the optical zone, without a cover perforation. The incidence of microscope cover perforation was very low and was not shown to be associated with bacterial contamination. External sources of bacterial contamination seem to outweigh the problem of contamination due to failure of cover integrity. © 2014 S. Karger AG, Basel.

  1. Isosorbide-Induced Decompression Effect on the Scala Media: Participation of Plasma Osmolality and Plasma Arginine Vasopressin.

    Science.gov (United States)

    Takeda, Taizo; Takeda, Setsuko; Uehara, Natsumi; Yanagisawa, Shungaku; Furukawa, Tatsuya; Nibu, Ken-Ichi; Kakigi, Akinobu

    2017-04-01

    The correlation between the isosorbide-induced decompression effect on the endolymphatic space and plasma osmolality (p-OSM) or plasma arginine vasopressin (p-AVP) was investigated on comparing two different dosages of isosorbide (2.8 and 1.4 g/kg) to elucidate why the decompression effect is delayed with a large dose of isosorbide. Two experiments were performed using 80 guinea pigs. Experiment 1 was designed to morphologically investigate the sequential influence of the oral intake of 1.4- and 2.8-g/kg doses of isosorbide on the endolymphatic volume. The animals used were 50 guinea pigs (control: 10, experimental: 40). All animals underwent surgical obliteration of the endolymphatic sac of the left ear. One month after the surgery, control animals were sacrificed 3 hours after the intake of distilled water, and experimental animals were sacrificed 3 and 6 hours after the isosorbide intake. All of the left temporal bone served for the quantitative assessment of changes in the endolymphatic space, and the cross-sectional area of the scala media was measured from the mid-modiolar sections of the cochlea.Experiment 2 was designed to investigate changes in p-OSM and p-AVP levels 3 hours after the oral intake of isosorbide. Animals used were 15 guinea pigs (control: 5, experimental: 10). The control group received the oral administration of distilled water (4 ml/kg), and the experimental animals were subdivided into two groups consisting of 10 animals each by the dosage of isosorbide (1.4 or 2.8 g/kg). All animals were sacrificed for the measurement of p-OSM and p-AVP concentrations 3 hours after the intake of water or 70% isosorbide solution. Morphologically, an isosorbide-induced decompression effect was noted in animals with both 1.4- and 2.8-g/kg doses of isosorbide. According to the regression analysis, however, the volumetric decrease of the endolymphatic space was more evident in cases with the small dose (1.4 g/kg) 3 hours after the intake

  2. Early versus late orbital decompression in Graves' orbitopathy: a retrospective study in 125 patients

    NARCIS (Netherlands)

    Baldeschi, Lelio; Wakelkamp, Iris M. M. J.; Lindeboom, Robert; Prummel, Marc F.; Wiersinga, Wilmar M.

    2006-01-01

    PURPOSE: To determine if early rehabilitative orbital decompression in Graves' orbitopathy (GO) leads to a more effective postoperative outcome than the same intervention performed at a later, more likely, fibrotic stage. DESIGN: Retrospective comparative case series. PARTICIPANTS: The medical

  3. Fuel Rod Melt Progression Simulation Using Low-Temperature Melting Metal Alloy

    International Nuclear Information System (INIS)

    Seung Dong Lee; Suh, Kune Y.; GoonCherl Park; Un Chul Lee

    2002-01-01

    The TMI-2 accident and various severe fuel damage experiments have shown that core damage is likely to proceed through various states before the core slumps into the lower head. Numerous experiments were conducted to address when and how the core can lose its original geometry, what geometries are formed, and in what processes the core materials are transported to the lower plenum of the reactor pressure vessel. Core degradation progresses along the line of clad ballooning, clad oxidation, material interaction, metallic blockage, molten pool formation, melt progression, and relocation to the lower head. Relocation into the lower plenum may occur from the lateral periphery or from the bottom of the core depending upon the thermal and physical states of the pool. Determining the quantities and rate of molten material transfer to the lower head is important since significant amounts of molten material relocated to the lower head can threaten the vessel integrity by steam explosion and thermal and mechanical attack of the melt. In this paper the focus is placed on the melt flow regime on a cylindrical fuel rod utilizing the LAMDA (Lumped Analysis of Melting in Degrading Assemblies) facility at the Seoul National University. The downward relocation of the molten material is a combination of the external film flow and the internal pipe flow. The heater rods are 0.8 m long and are coated by a low-temperature melting metal alloy. The electrical internal heating method is employed during the test. External heating is adopted to simulate the exothermic Zircaloy-steam reaction. Tests are conducted in several quasi-steady-state conditions. Given the variable boundary conditions including the heat flux and the water level, observation is made for the melting location, progression, and the mass of molten material. Finally, the core melt progression model is developed from the visual inspection and quantitative analysis of the experimental data. As the core material relocates

  4. Surgical decompression for space-occupying cerebral infarction: outcomes at 3 years in the randomized HAMLET trial.

    Science.gov (United States)

    Geurts, Marjolein; van der Worp, H Bart; Kappelle, L Jaap; Amelink, G Johan; Algra, Ale; Hofmeijer, Jeannette

    2013-09-01

    We assessed whether the effects of surgical decompression for space-occupying hemispheric infarction, observed at 1 year, are sustained at 3 years. Patients with space-occupying hemispheric infarction, who were enrolled in the Hemicraniectomy After Middle cerebral artery infarction with Life-threatening Edema Trial within 4 days after stroke onset, were followed up at 3 years. Outcome measures included functional outcome (modified Rankin Scale), death, quality of life, and place of residence. Poor functional outcome was defined as modified Rankin Scale >3. Of 64 included patients, 32 were randomized to decompressive surgery and 32 to best medical treatment. Just as at 1 year, surgery had no effect on the risk of poor functional outcome at 3 years (absolute risk reduction, 1%; 95% confidence interval, -21 to 22), but it reduced case fatality (absolute risk reduction, 37%; 95% confidence interval, 14-60). Sixteen surgically treated patients and 8 controls lived at home (absolute risk reduction, 27%; 95% confidence interval, 4-50). Quality of life improved between 1 and 3 years in patients treated with surgery. In patients with space-occupying hemispheric infarction, the effects of decompressive surgery on case fatality and functional outcome observed at 1 year are sustained at 3 years. http://www.controlled-trials.com. Unique identifier: ISRCTN94237756.

  5. A review of the influence of physical condition parameters on a typical aerospace stress effect: Decompression sickness

    Science.gov (United States)

    West, V. R.; Parker, J. F., Jr.

    1973-01-01

    The study examines data on episodes of decompression sickness, particularly from recent Navy work in which the event occurred under multiple stress conditions, to determine the extent to which decompression sickness might be predicted on the basis of personal characteristics such as age, weight, and physical condition. Such information should ultimately be useful for establishing medical selection criteria to screen individuals prior to participation inactivities involving extensive changes in ambient pressure, including those encountered in space operations. The main conclusions were as follows. There is a definite and positive relationship between increasing age and weight and the likelihood of decompression sickness. However, for predictive purposes, the relationship is low. To reduce the risk of bends, particularly for older individuals, strenuous exercise should be avoided immediately after ambient pressure changes. Temperatures should be kept at the low end of the comfort zone. For space activities, pressure changes of over 6-7 psi should be avoided. Prospective participants in future missions such as the Space Shuttle should not be excluded on the basis of age, certainly to age 60, if their general condition is reasonably good and they are not grossly obese. (Modified author abstract)

  6. Evolution of Brasiliano-age granitoid types in a shear-zone environment, Umarizal-Caraubas region, Rio Grande do Norte, northeast Brazil

    Science.gov (United States)

    Galindo, A. C.; Dall'Agnol, R.; McReath, I.; Lafon, J. M.; Teixeira, N.

    1995-01-01

    A sequence of Brasiliano-age granitoid types is exposed in a small area near the cities of Umarizal and Caraúbas in Rio Grande do Norte State, Northeast Brazil. Porphyritic K-alkali-calcic monzogranite is an important facies of the oldest Caraúbas intrusion (RbSr whole rock isochron age of ca. 630 Ma), which suffered solid-state deformation due to movements on a major NE-trending shear zone. The intrusion of the Prado and part of the Quixaba bodies was probably controlled by the shear zone. These two bodies include mafic/intermediate rocks, some of which contain two pyroxenes, and have hybrid, partly alkaline and partly shoshonitic geochemical characteristics. Rock types and ages are similar to those of some Pan-African occurrences in southwestern Nigeria. The Tourão body, intruded at ca. 590 Ma, presents preferred mineral orientations which are probably largely magmatic, since little evidence is found for widespread solid-state deformation. On the other hand, its intrusion may have been facilitated by the presence of the shear-zone faults. The rocks form a monomodal felsic K-alkali-calcic suite. With the exception of the Quixaba body, all these earlier granitoids are magmatic epidote- and magnetite-bearing porphyritic monzogranites with trace element geochemical characteristics of modern syn-collisional granites. The latest intrusion at ca. 545 Ma is mainly represented by potassic quartz syenites and related rocks, some of which contain fayalite or ferrohypersthene. These rocks possess neither well developed mineral orientations of magmatic origin nor signs of solid-state deformation. They are mineralogically similar to, but younger than some of the "bauchites" of central Nigeria. Geochemical signatures are comparable with those of modern within-plate granites. All granitoids present high ( 87Sr/ 86Sr)i ratios which range from 0.708 to 0.712, and increase with decreasing age. Such ratios are compatible with important or dominant crustal contributions. On the

  7. Successful Left-Heart Decompression during Extracorporeal Membrane Oxygenation in an Adult Patient by Percutaneous Transaortic Catheter Venting

    Directory of Open Access Journals (Sweden)

    Tae Hee Hong

    2015-06-01

    Full Text Available Venoarterial extracorporeal membrane oxygenation (VA ECMO is widely used in patients with cardiogenic shock. Insufficient decompression of the left ventricle (LV is considered a major factor preventing adequate LV recovery. A 40-year-old male was diagnosed with acute myocardial infarction, and revascularization was performed using percutaneous stenting. However, cardiogenic shock occurred, and VA ECMO was initiated. Severe LV failure developed, and percutaneous transaortic catheter venting (TACV was incorporated into the venous circuit of VA ECMO under transthoracic echocardiography guidance. The patient was successfully weaned from VA ECMO. Percutaneous TACV is an effective, relatively noninvasive, and rapid method of LV decompression in patients undergoing VA ECMO.

  8. Intraoperative 3-dimensional navigation and ultrasonography during posterior decompression with instrumented fusion for ossification of the posterior longitudinal ligament in the thoracic spine.

    Science.gov (United States)

    Tian, Wei; Weng, Chong; Liu, Bo; Li, Qin; Sun, Yu-Qing; Yuan, Qiang; Zhang, Bo; Wang, Yong-Qing; He, Da

    2013-08-01

    A retrospective clinical study was conducted. The purpose of this study was to describe the clinical outcomes of intraoperative 3D navigation (ITN) and ultrasonography during posterior decompression and instrumented fusion for thoracic myelopathy due to ossification of the posterior longitudinal ligament (OPLL). The symptoms caused by thoracic-ossification of the posterior longitudinal ligament (T-OPLL) are usually progressive and do not respond to conservative treatment-surgical intervention is the only effective treatment option. Various methods have been described for the treatment of symptomatic T-OPLL, all of which have limitations. The study included 18 patients with T-OPLL who underwent posterior decompression with instrumented fusion from 2006 to 2011. A staged operative procedure was used. First, pedicle screws were placed with ITN and a wide laminectomy was performed with resection of ossification of the ligamentum flavum (if present). With insufficient decompression on intraoperative ultrasonography, additional circumferential decompression was performed through a transpedicular approach. ITN-guided OPLL resection was performed using a burr attached to a navigational tracker. In all cases, posterior instrumented fusion was performed in situ. The outcomes were evaluated with the modified Japanese Orthopaedic Association scores and recovery rates. Intraoperative ultrasonography showed that posterior laminectomy was sufficient in 6 patients; the remaining 12 were treated with additional circumferential decompression. The follow-up period ranged from 1 to 6 years (mean period, 2.8 y). Postoperative transient neurological deterioration occurred in 1 patient, and cerebrospinal fluid leakage occurred in 4 patients. All patients showed neurological recovery with a mean Japanese Orthopaedic Association score that improved from 5.5 points preoperatively to 8.5 points at the final follow-up and a mean recovery rate of 54.5%. Intraoperative ultrasonography and ITN

  9. Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al.

    Science.gov (United States)

    Liu, Zhong-Li; Zhang, Xiu-Lu; Cai, Ling-Cang

    2015-09-21

    A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curve of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials.

  10. Shock melting method to determine melting curve by molecular dynamics: Cu, Pd, and Al

    International Nuclear Information System (INIS)

    Liu, Zhong-Li; Zhang, Xiu-Lu; Cai, Ling-Cang

    2015-01-01

    A melting simulation method, the shock melting (SM) method, is proposed and proved to be able to determine the melting curves of materials accurately and efficiently. The SM method, which is based on the multi-scale shock technique, determines melting curves by preheating and/or prepressurizing materials before shock. This strategy was extensively verified using both classical and ab initio molecular dynamics (MD). First, the SM method yielded the same satisfactory melting curve of Cu with only 360 atoms using classical MD, compared to the results from the Z-method and the two-phase coexistence method. Then, it also produced a satisfactory melting curve of Pd with only 756 atoms. Finally, the SM method combined with ab initio MD cheaply achieved a good melting curve of Al with only 180 atoms, which agrees well with the experimental data and the calculated results from other methods. It turned out that the SM method is an alternative efficient method for calculating the melting curves of materials

  11. Microneurolysis and decompression of long thoracic nerve injury are effective in reversing scapular winging: Long-term results in 50 cases

    Directory of Open Access Journals (Sweden)

    Lyons Andrew B

    2007-03-01

    Full Text Available Abstract Background Long thoracic nerve injury leading to scapular winging is common, often caused by closed trauma through compression, stretching, traction, direct extrinsic force, penetrating injury, or neuritides such as Parsonage-Turner syndrome. We undertook the largest series of long thoracic nerve decompression and neurolysis yet reported to demonstrate the usefulness of long thoracic nerve decompression. Methods Winging was bilateral in 3 of the 47 patients (26 male, 21 female, yielding a total of 50 procedures. The mean age of the patients was 33.4 years, ranging from 24–57. Causation included heavy weight-lifting (31 patients, repetitive throwing (5 patients, deep massage (2 patients, repetitive overhead movement (1 patient, direct trauma (1 patient, motor bike accident (1 patient, and idiopathic causes (9 patients. Decompression and microneurolysis of the long thoracic nerve were performed in the supraclavicular space. Follow-up (average of 25.7 months consisted of physical examination and phone conversations. The degree of winging was measured by the operating surgeon (RKN. Patients also answered questions covering 11 quality-of-life facets spanning four domains of the World Health Organization Quality of Life questionnaire. Results Thoracic nerve decompression and neurolysis improved scapular winging in 49 (98% of the 50 cases, producing "good" or "excellent" results in 46 cases (92%. At least some improvement occurred in 98% of cases that were less than 10 years old. Pain reduction through surgery was good or excellent in 43 (86% cases. Shoulder instability affected 21 patients preoperatively and persisted in 5 of these patients after surgery, even in the 5 patients with persistent instability who experienced some relief from the winging itself. Conclusion Surgical decompression and neurolysis of the long thoracic nerve significantly improve scapular winging in appropriate patients, for whom these techniques should be considered

  12. Interspinous process device versus standard conventional surgical decompression for lumbar spinal stenosis: Randomized controlled trial

    NARCIS (Netherlands)

    W.A. Moojen (Wouter); M.P. Arts (Mark); W.C.H. Jacobs (Wilco); E.W. van Zwet (Erik); M.E. van den Akker-van Marle (Elske); B.W. Koes (Bart); C.L.A.M. Vleggeert-Lankamp (Carmen); W.C. Peul (Wilco)

    2013-01-01

    markdownabstractAbstract Objective To assess whether interspinous process device implantation is more effective in the short term than conventional surgical decompression for patients with intermittent neurogenic claudication due to lumbar spinal stenosis. Design Randomized controlled

  13. Re-appraisal of the Magma-rich versus Magma-poor Paradigm at Rifted Margins: consequences for breakup processes

    Science.gov (United States)

    Tugend, J.; Gillard, M.; Manatschal, G.; Nirrengarten, M.; Harkin, C. J.; Epin, M. E.; Sauter, D.; Autin, J.; Kusznir, N. J.; McDermott, K.

    2017-12-01

    Rifted margins are often classified based on their magmatic budget only. Magma-rich margins are commonly considered to have excess decompression melting at lithospheric breakup compared with steady state seafloor spreading while magma-poor margins have suppressed melting. New observations derived from high quality geophysical data sets and drill-hole data have revealed the diversity of rifted margin architecture and variable distribution of magmatism. Recent studies suggest, however, that rifted margins have more complex and polyphase tectono-magmatic evolutions than previously assumed and cannot be characterized based on the observed volume of magma alone. We compare the magmatic budget related to lithospheric breakup along two high-resolution long-offset deep reflection seismic profiles across the SE-Indian (magma-poor) and Uruguayan (magma-rich) rifted margins. Resolving the volume of magmatic additions is difficult. Interpretations are non-unique and several of them appear plausible for each case involving variable magmatic volumes and mechanisms to achieve lithospheric breakup. A supposedly 'magma-poor' rifted margin (SE-India) may show a 'magma-rich' lithospheric breakup whereas a 'magma-rich' rifted margin (Uruguay) does not necessarily show excess magmatism at lithospheric breakup compared with steady-state seafloor spreading. This questions the paradigm that rifted margins can be subdivided in either magma-poor or magma-rich margins. The Uruguayan and other magma-rich rifted margins appear characterized by an early onset of decompression melting relative to crustal breakup. For the converse, where the onset of decompression melting is late compared with the timing of crustal breakup, mantle exhumation can occur (e.g. SE-India). Our work highlights the difficulty in determining a magmatic budget at rifted margins based on seismic reflection data alone, showing the limitations of margin classification based solely on magmatic volumes. The timing of

  14. The Microwave Properties of Simulated Melting Precipitation Particles: Sensitivity to Initial Melting

    Science.gov (United States)

    Johnson, B. T.; Olson, W. S.; Skofronick-Jackson, G.

    2016-01-01

    A simplified approach is presented for assessing the microwave response to the initial melting of realistically shaped ice particles. This paper is divided into two parts: (1) a description of the Single Particle Melting Model (SPMM), a heuristic melting simulation for ice-phase precipitation particles of any shape or size (SPMM is applied to two simulated aggregate snow particles, simulating melting up to 0.15 melt fraction by mass), and (2) the computation of the single-particle microwave scattering and extinction properties of these hydrometeors, using the discrete dipole approximation (via DDSCAT), at the following selected frequencies: 13.4, 35.6, and 94.0GHz for radar applications and 89, 165.0, and 183.31GHz for radiometer applications. These selected frequencies are consistent with current microwave remote-sensing platforms, such as CloudSat and the Global Precipitation Measurement (GPM) mission. Comparisons with calculations using variable-density spheres indicate significant deviations in scattering and extinction properties throughout the initial range of melting (liquid volume fractions less than 0.15). Integration of the single-particle properties over an exponential particle size distribution provides additional insight into idealized radar reflectivity and passive microwave brightness temperature sensitivity to variations in size/mass, shape, melt fraction, and particle orientation.

  15. DEPENDENCY OF SULFATE SOLUBILITY ON MELT COMPOSITION AND MELT POLYMERIZATION

    International Nuclear Information System (INIS)

    JANTZEN, CAROL M.

    2004-01-01

    Sulfate and sulfate salts are not very soluble in borosilicate waste glass. When sulfate is present in excess it can form water soluble secondary phases and/or a molten salt layer (gall) on the melt pool surface which is purported to cause steam explosions in slurry fed melters. Therefore, sulfate can impact glass durability while formation of a molten salt layer on the melt pool can impact processing. Sulfate solubility has been shown to be compositionally dependent in various studies, (e.g. , B2O3, Li2O, CaO, MgO, Na2O, and Fe2O3 were shown to increase sulfate solubility while Al2O3 and SiO2 decreased sulfate solubility). This compositional dependency is shown to be related to the calculated melt viscosity at various temperatures and hence the melt polymerization

  16. Rectus extraocular muscle paths and decompression surgery for Graves orbitopathy: mechanism of motility disturbances

    NARCIS (Netherlands)

    Abràmoff, Michael D.; Kalmann, Rachel; de Graaf, Mieke E. L.; Stilma, Jan S.; Mourits, Maarten P.

    2002-01-01

    PURPOSE: To study possible causes of motility disturbances that may result from orbital decompression surgery in patients with Graves orbitopathy and especially the role of rectus extraocular muscle paths. METHODS: Sixteen patients with Graves orbitopathy were studied before and 3 to 6 months after

  17. The probability and severity of decompression sickness

    Science.gov (United States)

    Hada, Ethan A.; Vann, Richard D.; Denoble, Petar J.

    2017-01-01

    Decompression sickness (DCS), which is caused by inert gas bubbles in tissues, is an injury of concern for scuba divers, compressed air workers, astronauts, and aviators. Case reports for 3322 air and N2-O2 dives, resulting in 190 DCS events, were retrospectively analyzed and the outcomes were scored as (1) serious neurological, (2) cardiopulmonary, (3) mild neurological, (4) pain, (5) lymphatic or skin, and (6) constitutional or nonspecific manifestations. Following standard U.S. Navy medical definitions, the data were grouped into mild—Type I (manifestations 4–6)–and serious–Type II (manifestations 1–3). Additionally, we considered an alternative grouping of mild–Type A (manifestations 3–6)–and serious–Type B (manifestations 1 and 2). The current U.S. Navy guidance allows for a 2% probability of mild DCS and a 0.1% probability of serious DCS. We developed a hierarchical trinomial (3-state) probabilistic DCS model that simultaneously predicts the probability of mild and serious DCS given a dive exposure. Both the Type I/II and Type A/B discriminations of mild and serious DCS resulted in a highly significant (p probability of ‘mild’ DCS resulted in a longer allowable bottom time for the same 2% limit. However, for the 0.1% serious DCS limit, we found a vastly decreased allowable bottom dive time for all dive depths. If the Type A/B scoring was assigned to outcome severity, the no decompression limits (NDL) for air dives were still controlled by the acceptable serious DCS risk limit rather than the acceptable mild DCS risk limit. However, in this case, longer NDL limits were allowed than with the Type I/II scoring. The trinomial model mild and serious probabilities agree reasonably well with the current air NDL only with the Type A/B scoring and when 0.2% risk of serious DCS is allowed. PMID:28296928

  18. The effects of massage therapy after decompression and fusion surgery of the lumbar spine: a case study.

    Science.gov (United States)

    Keller, Glenda

    2012-01-01

    Spinal fusion and decompression surgery of the lumbar spine are common procedures for problems such as disc herniations. Various studies for postoperative interventions have been conducted; however, no massage therapy studies have been completed. The objective of this study is to determine if massage therapy can beneficially treat pain and dysfunction associated with lumbar spinal decompression and fusion surgery. Client is a 47-year-old female who underwent spinal decompression and fusion surgery of L4/L5 due to chronic disc herniation symptoms. The research design was a case study in a private clinic involving the applications of seven, 30-minute treatments conducted over eight weeks. Common Swedish massage and myofascial techniques were applied to the back, shoulders, posterior hips, and posterior legs. Outcomes were assessed using the following measures: VAS pain scale, Hamstring Length Test, Oswestry Disability Index, and the Roland-Morris Disability Questionnaire. Hamstring length improved (in degrees of extension) from pretreatment measurements in the right leg of 40° and left leg 65° to post-treatment measurement at the final visit, when the results were right 50° and left 70°. The Oswestry Disability Index improved 14%, from 50% to 36% disability. Roland-Morris Disability decreased 1 point, from 3/24 to 2/24. The VAS pain score decreased by 2 points after most treatments, and for three of the seven treatments, client had a post-treatment score of 0/10. Massage for pain had short-term effects. Massage therapy seemed to lengthen the hamstrings bilaterally. Massage therapy does appear to have positive effects in the reduction of disability. This study is beneficial for understanding the relationship between massage therapy and clients who have undergone spinal decompression and fusion. Further research is warranted.

  19. Decompression Retinopathy after ExPRESS Shunt Implantation for Steroid-Induced Ocular Hypertension: A Case Report

    Directory of Open Access Journals (Sweden)

    Khawla Abu Samra

    2011-01-01

    Full Text Available Purpose. To present a unique case of decompression retinopathy after the implantation of ExPRESS drainage device. Method. A 25-year-old female patient underwent implantation of ExPRESS drainage device in the left eye for the management of steroid-induced ocular hypertension. Results. On the postoperative day one, best-corrected visual acuity in the left eye was 20/50. Fundus examination revealed diffuse intraretinal hemorrhages, some white-centered, throughout the retina. There was also marked tortuosity to the retinal vasculature and no evidence of choroidal effusion. Intravenous fluorescein angiography and indocyanine green did not contribute to the aetiopathogenesis. Conclusion. Decompression retinopathy can occur following the implantation of ExPRESS drainage device. It is very important to be aware of this complication in patients with relatively high intraocular pressure who is planned for filtration surgery, including the ExPRESS implant.

  20. Patent Foramen Ovale as a Risk Factor for Altitude Decompression Illness

    Science.gov (United States)

    2001-06-01

    Medical Issues in Hypo-and Hyperbaric Conditions [les Questions medicales a caractere oprationel liees aux conditions hypobares ou hyperbares ] To order the...on "Operational Medical Issues in Hypo- and Hyperbaric Conditions ", held in Toronto, Canada, 16-19 October 2000, and published in RTO MP-062. 3-2...Space Environ Med 1996; 67: 1092-6. Powell MR, Norfleet WT, Kumar KV, Butler BD. Patent foramen ovale and hypobaric decompression. Aviat Space Environ

  1. Microvascular decompression for the patient with painful tic convulsif after Bell palsy.

    Science.gov (United States)

    Jiao, Wei; Zhong, Jun; Sun, Hui; Zhu, Jin; Zhou, Qiu-Meng; Yang, Xiao-Sheng; Li, Shi-Ting

    2013-05-01

    Painful tic convulsif is referred to as the concurrent trigeminal neuralgia and hemifacial spasm. However, painful tic convulsif after ipsilateral Bell palsy has never been reported before. We report a case of a 77-year-old woman with coexistent trigeminal neuralgia and hemifacial spasm who had experienced Bell palsy half a year ago. The patient underwent microvascular decompression. Intraoperatively, the vertebrobasilar artery was found to deviate to the symptomatic side and a severe adhesion was observed in the cerebellopontine angle. Meanwhile, an ectatic anterior inferior cerebellar artery and 2 branches of the superior cerebellar artery were identified to compress the caudal root entry zone (REZ) of the VII nerve and the rostroventral cisternal portion of the V nerve, respectively. Postoperatively, the symptoms of spasm ceased immediately and the pain disappeared within 3 months. In this article, the pathogenesis of the patient's illness was discussed and it was assumed that the adhesions developed from inflammatory reactions after Bell palsy and the anatomic features of the patient were the factors that generated the disorder. Microvascular decompression surgery is the suggested treatment of the disease, and the dissection should be started from the caudal cranial nerves while performing the operation.

  2. Compression and decompression of digital seismic waveform data for storage and communication

    International Nuclear Information System (INIS)

    Bhadauria, Y.S.; Kumar, Vijai

    1991-01-01

    Two different classes of data compression schemes, namely physical data compression schemes and logical data compression schemes are examined for their use in storage and communication of digital seismic waveform data. In physical data compression schemes, the physical size of the waveform is reduced. One, therefore, gets only a broad picture of the original waveform, when the data are retrieved and the waveform is reconstituted. Coerrelation between original and decompressed waveform varies inversely with the data compresion ratio. In the logical data compression schemes, the data are stored in a logically encoded form. Storage of unnecessary characters like blank space is avoided. On decompression original data are retrieved and compression error is nil. Three algorithms of logical data compression schemes have been developed and studied. These are : 1) optimum formatting schemes, 2) differential bit reduction scheme, and 3) six bit compression scheme. Results of the above three algorithms of logical compression class are compared with those of physical compression schemes reported in literature. It is found that for all types of data, six bit compression scheme gives the highest value of data compression ratio. (author). 6 refs., 8 figs., 1 appendix, 2 tabs

  3. Continuous decompression with intramedullary nailing for the treatment of unicameral bone cysts.

    Science.gov (United States)

    Masquijo, Julio Javier; Baroni, Eduardo; Miscione, Horacio

    2008-08-01

    To evaluate the efficacy of decompression of unicameral bone cysts (UBCs) of the long bones with intramedullary nailing and to compare responses to treatment according to location. We evaluated 48 consecutive patients treated between January 1988 and June 2000. Mean age was 10.3 years. Mean follow-up was 9.8 years. Evaluation was performed according to the radiographic criteria of Capanna. UBCs were located in the proximal humerus (n = 24), humeral shaft (n = 2), proximal femur (n = 19), distal tibia (n = 2) and fibula (n = 1). A total of 62.5% presented a pathological fracture. Successful results were observed in 89.5% (26 total healing, 17 healing with residual radiolucent areas), and there were four recurrences and, in one case, no response to treatment. There was more healing in the humerus than in the femur (92.3% versus 84.2%), and more tendency to restitution ad integrum, although the difference was not statistically significant (P = 0.1499). Intramedullary nailing is a minimally invasive method, which permits early stability and decompresses the cyst allowing healing. Significant differences were not observed among results from different locations.

  4. The results of decompressive surgery and instrumented posterolateral fusion in refractory degenerative spondylolisthesis

    Directory of Open Access Journals (Sweden)

    Behtash H

    2009-02-01

    Full Text Available "nBackground: Degenerative spondylolisthesis is a common disease of the lumbar spine especially in older ones. The disease represents a challenge to the treating physician. At present, for those patients that deteriorate clinically, there are many proposed algorithms for the surgical treatment. This before and after study was undertaken to assess the surgical results of decompression and instrumented posterolateral fusion in these patients. "nMethods: The study population consisted of 23 patients who had undergone no prior surgery for degenerative spondylolisthesis on the lumbar spine. These patients were treated by decompression, bilateral posterolateral fusion, and segmental (pedicle screw instrumentation with mean follow-up of 29 months (range, 13-73 months. Finally, The clinical results were evaluated for all patients by means of an Oswestry Disability Index (ODI version 2.1, the Henderson's functional capacity, and persistence of leg symptoms, low back pain or claudication. Mann-Whitney and Chi-Square tests were used to assess the average values and comparison, respectively. "nResults: Henderson's functional capacity at the last visit session was excellent in 14 (60.9%, good in 7 (30.4%, fair in 2 (8.7% cases. ODI decreased from 72.2% (50-88% preoperatively to 14.4% (0-54% at the latest follow-up visit. A history of leg pain or claudication was correlated significantly with the amount of decline in ODI score and Henderson's functional capacity (p<0.05. "nConclusion: In spite of limited number of our patients, decompressive surgery plus instrumented posterolateral fusion is a safe, reliable, and satisfactory procedure for treating degenerative lumbar spondylolisthesis. This procedure may be done when conservative treatment was failed and psychological problems can be ruled out.

  5. Perfluorocarbon in Delayed Recompression with a Mixed Gender Swine Model of Decompression Sickness.

    Science.gov (United States)

    Cronin, William A; Hall, Aaron A; Auker, Charles R; Mahon, Richard T

    2018-01-01

    Perfluorocarbons (PFC) are fluorinated hydrocarbons that dissolve gases to a much greater degree than plasma and hold promise in treating decompression sickness (DCS). The efficacy of PFC in a mixed gender model of DCS and safety in recompression therapy has not been previously explored. Swine (25 kg; N = 104; 51 male and 53 female) were randomized into normal saline solution (NSS) or PFC emulsion treatment groups and subjected to compression on air in a hyperbaric chamber at 200 fsw for 31 min. Then the animals were decompressed and observed for signs of DCS. Afterwards, they were treated with oxygen and either PFC (4 cc · kg-1) or NSS (4 cc · kg-1). Surviving animals were observed for 4 h, at which time they underwent recompression therapy using a standard Navy Treatment Table 6. After 24 h the animals were assessed and then euthanized. Survival rates were not significantly different between NSS (74.04%) and PFC (66.67%) treatment groups. All swine that received recompression treatment survived to the end of the study and no seizures were observed in either PFC or NSS animals. Within the saline treated swine group there were no significant differences in DCS survival between male (75.00%, N = 24) and female (73.08%, N = 26) swine. Within the PFC treated swine, survival of females (51.85%, N = 27) was significantly lower than males (81.48%, N = 27). In this large animal mixed gender efficacy study in DCS, PFC did not improve mortality or spinal cord injury, but appears safe during recompressive therapy. Gender differences in DCS treatment with PFC will need further study.Cronin WA, Hall AA, Auker CR, Mahon RT. Perfluorocarbon in delayed recompression with a mixed gender swine model of decompression sickness. Aerosp Med Hum Perform. 2018; 89(1):14-18.

  6. Unilateral Approach for Bilateral Decompression of Lumbar Spinal Stenosis: A Minimal Invasive Surgery

    International Nuclear Information System (INIS)

    Usman, M.; Ali, M.; Khanzada, K.; Haq, N.U.; Aman, R.; Ali, M.

    2013-01-01

    Objective: To assess the feasibility and efficacy of a novel, minimally invasive spinal surgery technique for the correction of lumbar spinal stenosis involving unilateral approach for bilateral decompression. Study Design: Cross-sectional observational study. Place and Duration of Study: Neurosurgery Department of PGMI, Lady Reading Hospital, Peshawar, from January to December 2010. Methodology: A total of 60 patients with lumbar stenosis were randomly assigned to undergo either a conventional laminectomy (30 patients, Group A), or a unilateral approach (30 patients, Group B). Clinical outcomes was measured using the scale of Finneson and Cooper. All the data was collected by using a proforma and different parameters were assessed for a minimum follow-up period of three months. Data was analyzed by descriptive statistics using SPSS software version 17. Results: Adequate decompression was achieved in all patients. Compared with patients in the conventional laminectomy group, patients who received the novel procedure (unilateral approach) had a reduced mean duration of hospital stay, a faster recovery rate and majority of the patients (88.33%) had an excellent to fair operative result according to the Finneson and Cooper scale. Five major complications occurred in all patient groups, 2 patients had unintended dural rent and 2 wound dehiscence each and fifth patient had worsening of symptoms. There was no mortality in the series. Conclusion: The ultimate goal of the unilateral approach to treat lumbar spinal stenosis is to achieve adequate decompression of the neural elements. An additional benefit of a minimally invasive approach is adequate preservation of vertebral stability, as it requires only minimal muscle trauma, preservation of supraspinous/intraspinous ligament complex and spinous process, therefore, allows early mobilization. This also shortens the hospital stay, reduces postoperative back pain, and leads to satisfactory outcome. (author)

  7. Comparison of Porcine and Bovine Collagen Dural Substitutes in Posterior Fossa Decompression for Chiari I Malformation in Adults.

    Science.gov (United States)

    Lee, Christine K; Mokhtari, Tara; Connolly, Ian D; Li, Gordon; Shuer, Lawrence M; Chang, Steven D; Steinberg, Gary K; Hayden Gephart, Melanie

    2017-12-01

    Posterior fossa decompression surgeries for Chiari malformations are susceptible to postoperative complications such as pseudomeningocele, external cerebrospinal fluid (CSF) leak, and meningitis. Various dural substitutes have been used to improve surgical outcomes. This study examined whether the collagen matrix dural substitute type correlated with the incidence of postoperative complications after posterior fossa decompression in adult patients with Chiari I malformations. A retrospective cohort study was conducted of 81 adult patients who underwent an elective decompressive surgery for treatment of symptomatic Chiari I malformations, with duraplasty involving a dural substitute derived from either bovine or porcine collagen matrix. Demographics and treatment characteristics were correlated with surgical outcomes. A total of 81 patients were included in the study. Compared with bovine dural substitute, porcine dural substitute was associated with a significantly higher risk of pseudomeningocele occurrence (odds ratio, 5.78; 95% confidence interval, 1.65-27.15; P = 0.01) and a higher overall complication rate (odds ratio, 3.70; 95% confidence interval, 1.23-12.71; P = 0.03) by univariate analysis. There was no significant difference in the rate of meningitis, repeat operations, or overall complication rate between the 2 dural substitutes. In addition, estimated blood loss was a significant risk factor for meningitis (P = 0.03). Multivariate analyses again showed that porcine dural substitute was associated with pseudomeningocele occurrence, although the association with higher overall complication rate did not reach significance. Dural substitutes generated from porcine collagen, compared with those from bovine collagen, were associated with a higher likelihood of pseudomeningocele development in adult patients undergoing Chiari I malformation decompression and duraplasty. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Melting of contaminated metallic waste

    International Nuclear Information System (INIS)

    Lee, Y.-S.; Cheng, S.-Y.; Kung, H.-T.; Lin, L.-F.

    2004-01-01

    Approximately 100 tons of contaminated metallic wastes were produced each year due to maintenance for each TPC's nuclear power reactor and it was roughly estimated that there will be 10,000 tons of metallic scraps resulted from decommissioning of each reactor in the future. One means of handling the contaminated metal is to melt it. Melting process owns not only volume reduction which saves the high cost of final disposal but also resource conservation and recycling benefits. Melting contaminated copper and aluminum scraps in the laboratory scale have been conducted at INER. A total of 546 kg copper condenser tubes with a specific activity of about 2.7 Bq/g was melted in a vacuum induction melting facility. Three types of products, ingot, slag and dust were derived from the melting process, with average activities of 0.10 Bq/g, 2.33 Bq/g and 84.3 Bq/g respectively. After the laboratory melting stage, a pilot plant with a 500 kg induction furnace is being designed to melt the increasingly produced contaminated metallic scraps from nuclear facilities and to investigate the behavior of different radionuclides during melting. (author)

  9. Dynamics of Melting and Melt Migration as Inferred from Incompatible Trace Element Abundance in Abyssal Peridotites

    Science.gov (United States)

    Peng, Q.; Liang, Y.

    2008-12-01

    To better understand the melting processes beneath the mid-ocean ridge, we developed a simple model for trace element fractionation during concurrent melting and melt migration in an upwelling steady-state mantle column. Based on petrologic considerations, we divided the upwelling mantle into two regions: a double- lithology upper region where high permeability dunite channels are embedded in a lherzolite/harzburgite matrix, and a single-lithology lower region that consists of partially molten lherzolite. Melt generated in the single lithology region migrates upward through grain-scale diffuse porous flow, whereas melt in the lherzolite/harzburgite matrix in the double-lithology region is allowed to flow both vertically through the overlying matrix and horizontally into its neighboring dunite channels. There are three key dynamic parameters in our model: degree of melting experienced by the single lithology column (Fd), degree of melting experienced by the double lithology column (F), and a dimensionless melt suction rate (R) that measures the accumulated rate of melt extraction from the matrix to the channel relative to the accumulated rate of matrix melting. In terms of trace element fractionation, upwelling and melting in the single lithology column is equivalent to non-modal batch melting (R = 0), whereas melting and melt migration in the double lithology region is equivalent to a nonlinear combination of non-modal batch and fractional melting (0 abyssal peridotite, we showed, with the help of Monte Carlo simulations, that it is difficult to invert for all three dynamic parameters from a set of incompatible trace element data with confidence. However, given Fd, it is quite possible to constrain F and R from incompatible trace element abundances in residual peridotite. As an illustrative example, we used the simple melting model developed in this study and selected REE and Y abundance in diopside from abyssal peridotites to infer their melting and melt migration

  10. Nanobubbles Form at Active Hydrophobic Spots on the Luminal Aspect of Blood Vessels: Consequences for Decompression Illness in Diving and Possible Implications for Autoimmune Disease—An Overview

    Directory of Open Access Journals (Sweden)

    Ran Arieli

    2017-08-01

    Full Text Available Decompression illness (DCI occurs following a reduction in ambient pressure. Decompression bubbles can expand and develop only from pre-existing gas micronuclei. The different hypotheses hitherto proposed regarding the nucleation and stabilization of gas micronuclei have never been validated. It is known that nanobubbles form spontaneously when a smooth hydrophobic surface is submerged in water containing dissolved gas. These nanobubbles may be the long sought-after gas micronuclei underlying decompression bubbles and DCI. We exposed hydrophobic and hydrophilic silicon wafers under water to hyperbaric pressure. After decompression, bubbles appeared on the hydrophobic but not the hydrophilic wafers. In a further series of experiments, we placed large ovine blood vessels in a cooled high pressure chamber at 1,000 kPa for about 20 h. Bubbles evolved at definite spots in all the types of blood vessels. These bubble-producing spots stained positive for lipids, and were henceforth termed “active hydrophobic spots” (AHS. The lung surfactant dipalmitoylphosphatidylcholine (DPPC, was found both in the plasma of the sheep and at the AHS. Bubbles detached from the blood vessel in pulsatile flow after reaching a mean diameter of ~1.0 mm. Bubble expansion was bi-phasic—a slow initiation phase which peaked 45 min after decompression, followed by fast diffusion-controlled growth. Many features of decompression from diving correlate with this finding of AHS on the blood vessels. (1 Variability between bubblers and non-bubblers. (2 An age-related effect and adaptation. (3 The increased risk of DCI on a second dive. (4 Symptoms of neurologic decompression sickness. (5 Preconditioning before a dive. (6 A bi-phasic mechanism of bubble expansion. (7 Increased bubble formation with depth. (8 Endothelial injury. (9 The presence of endothelial microparticles. Finally, constant contact between nanobubbles and plasma may result in distortion of proteins and their

  11. Posterior Decompression, Lumber Interbody Fusion and Internal Fixation in the Treatment of Upper Lumbar Intervertebral Disc Herniation

    Directory of Open Access Journals (Sweden)

    DONG Zhan

    2014-12-01

    Full Text Available Objective: To assess the clinical outcomes of posterior decompression, interbody fusion and internal fixationfor the treatment of the upper lumbar intervertebral disc herniation. Methods: Twelve patients with the upper lumbar intervertebral disc herniation were treated by posterior decompression, interbosy fusion and internal fixation. The time of the operation, the amount of bleeding and the clinical efficacy were evaluated. Results: The time of operation was (143±36 min and the amount of bleeding during operation was (331.5±47.9 mL. There was no spinal cord and injuries, nerve injury, epidural damage and leakage of cerebrospinal fluid. All patients were followed up for 10~19 months with the average being 12.6 months. The functional scoring of Japanese Orthopedic Association (JOA before the operation was (11.4±3.3 scores and final score after follow-up was (22.9±3.1 scores and there were statistical difference (P<0.01. Lumber interbody fusion of all patients completed successfully and the good rate after the operation was 91.7%. Conclusion: Posterior decompression, interbody fusion and internal fixation for the treatment of the upper lumbar intervertebral disc herniation was characterized by full exposure, safety and significant efficacy.

  12. Forecasting Effusive Dynamics and Decompression Rates by Magmastatic Model at Open-vent Volcanoes.

    Science.gov (United States)

    Ripepe, Maurizio; Pistolesi, Marco; Coppola, Diego; Delle Donne, Dario; Genco, Riccardo; Lacanna, Giorgio; Laiolo, Marco; Marchetti, Emanuele; Ulivieri, Giacomo; Valade, Sébastien

    2017-06-20

    Effusive eruptions at open-conduit volcanoes are interpreted as reactions to a disequilibrium induced by the increase in magma supply. By comparing four of the most recent effusive eruptions at Stromboli volcano (Italy), we show how the volumes of lava discharged during each eruption are linearly correlated to the topographic positions of the effusive vents. This correlation cannot be explained by an excess of pressure within a deep magma chamber and raises questions about the actual contributions of deep magma dynamics. We derive a general model based on the discharge of a shallow reservoir and the magmastatic crustal load above the vent, to explain the linear link. In addition, we show how the drastic transition from effusive to violent explosions can be related to different decompression rates. We suggest that a gravity-driven model can shed light on similar cases of lateral effusive eruptions in other volcanic systems and can provide evidence of the roles of slow decompression rates in triggering violent paroxysmal explosive eruptions, which occasionally punctuate the effusive phases at basaltic volcanoes.

  13. Exogenous application of platelet-leukocyte gel during open subacromial decompression contributes to improved patient outcome

    NARCIS (Netherlands)

    Everts, P. A.; Devilee, R. J. J.; Mahoney, C. Brown; van Erp, A.; Oosterbos, C. J. M.; Stellenboom, M.; Knape, J. T. A.; van Zundert, A.

    2008-01-01

    Background: Platelet-leukocyte gel (PLG) is being used during various surgical procedures in an attempt to enhance the healing process. We studied the effects of PLG on postoperative recovery of patients undergoing open subacromial decompression (OSD). Methods: PLG was produced from

  14. Favourable outcome of posterior decompression and stabilization in lordosis for cervical spondylotic myelopathy: the spinal cord "back shift" concept.

    Science.gov (United States)

    Denaro, Vincenzo; Longo, Umile Giuseppe; Berton, Alessandra; Salvatore, Giuseppe; Denaro, Luca

    2015-11-01

    Surgical management of patients with multilevel CSM aims to decompress the spinal cord and restore the normal sagittal alignment. The literature lacks of high level evidences about the best surgical approach. Posterior decompression and stabilization in lordosis allows spinal cord back shift, leading to indirect decompression of the anterior spinal cord. The purpose of this study was to investigate the efficacy of posterior decompression and stabilization in lordosis for multilevel CSM. 36 out of 40 patients were clinically assessed at a mean follow-up of 5, 7 years. Outcome measures included EMS, mJOA Score, NDI and SF-12. Patients were asked whether surgery met their expectations and if they would undergo the same surgery again. Bone graft fusion, instrumental failure and cervical curvature were evaluated. Spinal cord back shift was measured and correlation with EMS and mJOA score recovery rate was analyzed. All scores showed a significative improvement (p 0.05). Ninety percent of patients would undergo the same surgery again. There was no deterioration of the cervical alignment, posterior grafted bones had completely fused and there were no instrument failures. The mean spinal cord back shift was 3.9 mm (range 2.5-4.5 mm). EMS and mJOA recovery rates were significantly correlated with the postoperative posterior cord migration (P lordosis is a valuable procedure for patients affected by multilevel CSM, leading to significant clinical improvement thanks to the spinal cord back shift. Postoperative lordotic alignment of the cervical spine is a key factor for successful treatment.

  15. Modelling of the controlled melt flow in a glass melting space – Its melting performance and heat losses

    Czech Academy of Sciences Publication Activity Database

    Jebavá, Marcela; Dyrčíková, Petra; Němec, Lubomír

    2015-01-01

    Roč. 430, DEC 15 (2015), s. 52-63 ISSN 0022-3093 Institutional support: RVO:67985891 Keywords : glass melt flow * mathematical modelling * energy distribution * space utilizatios * melting performance Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 1.825, year: 2015

  16. The urgency of surgical decompression in acute central cord injuries with spondylosis and without instability.

    Science.gov (United States)

    Lenehan, Brian; Fisher, Charles G; Vaccaro, Alex; Fehlings, Michael; Aarabi, Bizhan; Dvorak, Marcel F

    2010-10-01

    Systematic review, ambispective analysis of observational data. To make recommendations as to whether or not urgent surgical decompression is ever indicated as the optimal treatment for enhancing neurologic recovery in a patient with acute central cord injury without fracture or instability. There are currently no standards regarding the role and timing of decompression in acute traumatic central cord syndrome. In the setting of TCCS without spinal column instability, much controversy exists. We have performed a thorough literature search based on the following question: "Is there a role for urgent (within 24 hours from injury to surgery) surgical decompression in acute central cord syndrome without fracture or instability specifically to enhance neurologic recovery?" Data including patient demographics, mechanism of injury, comorbidities, neurologic status, and surgical treatment was analyzed from a multicenter STSG observational database. Outcome measured included ASIA Motor Score, ASIA Grade, Functional Independence Measure (FIM) Score, SF-36, Sphincter Disturbance, and Ambulatory status. Measures were recorded on admission, discharge, 6 months and 1 year. At 12-month follow-up, early surgery resulted in a 6.31 point greater improvement in total motor score than did the late surgery group, with a P = 0.0358. At 6-month follow-up, early surgery result in higher chance of improvement in ASIA Grade than late surgery, with an odds ratio = 3.39, while at 12-month follow-up early surgery resulted in a higher chance of improvement in ASIA Grade, with an odds ratio of 2.81. Patients who were operated on within 24 hours had 7.79 U more improvement in FIM Total Score than late surgery at 6 month follow-up, with P = 0.0474. The consensus of experts following review of relevant and examination of observational dataset concluded that it is reasonable and safe to consider early surgical decompression in patients with profound neurologic deficit (ASIA = C) and persistent

  17. Recent Changes in Arctic Sea Ice Melt Onset, Freeze-Up, and Melt Season Length

    Science.gov (United States)

    Markus, Thorsten; Stroeve, Julienne C.; Miller, Jeffrey

    2010-01-01

    In order to explore changes and trends in the timing of Arctic sea ice melt onset and freeze-up and therefore melt season length, we developed a method that obtains this information directly from satellite passive microwave data, creating a consistent data set from 1979 through present. We furthermore distinguish between early melt (the first day of the year when melt is detected) and the first day of continuous melt. A similar distinction is made for the freeze-up. Using this method we analyze trends in melt onset and freeze-up for 10 different Arctic regions. In all regions except for the Sea of Okhotsk, which shows a very slight and statistically insignificant positive trend (O.4 days/decade), trends in melt onset are negative, i.e. towards earlier melt. The trends range from -1.0day/decade for the Bering Sea to -7.3 days/decade for the East Greenland Sea. Except for the Sea of Okhotsk all areas also show a trend towards later autumn freeze onset. The Chukchi/Beaufort Seas and Laptev/East Siberian Seas observe the strongest trends with 7 days/decade. For the entire Arctic, the melt season length has increased by about 20 days over the last 30 years. Largest trends of over 1O days/decade are seen for Hudson Bay, the East Greenland Sea the Laptev/East Siberian Seas, and the Chukchi/Beaufort Seas. Those trends are statistically significant a1 the 99% level.

  18. Reaction of soda-lime-silica glass melt with water vapour at melting temperatures

    Czech Academy of Sciences Publication Activity Database

    Vernerová, Miroslava; Kloužek, Jaroslav; Němec, Lubomír

    2015-01-01

    Roč. 416, MAY 15 (2015), s. 21-30 ISSN 0022-3093 R&D Projects: GA TA ČR TA01010844 Institutional support: RVO:67985891 Keywords : glass melt * sulfate * water vapour * bubble nucleation * melt foaming * glass melting Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 1.825, year: 2015

  19. Transition metal ions in silicate melts. I. Manganese in sodium silicate melts

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, C; White, W B

    1980-01-01

    Optical absorption spectra obtained on glasses quenched from sodium silicate melts show Mn/sup 3 +/ to be the dominant species for melts heated in air and Mn/sup 2 +/ to be the dominant species for melts heated at P/sub O/sub 2// = 10/sup -17/ bar. The absorption spectrum of Mn/sup 3 +/ consists of an intense band at 20,000 cm/sup -1/ with a 15,000 cm/sup -1/ satellite possibly arising from the Jahn-Teller effect. The independence of the spectrum from melt composition and the high band intensity is offered as evidence for a distinct Mn/sup 3 +/ complex in the melt. The spectrum of Mn/sup 2 +/ is weak and many expected bands are not observed. A two-band luminescence spectrum from Mn/sup 2 +/ has been tentatively interpreted as due to Mn/sup 2 +/ in interstitial sites in the network and Mn/sup 2 +/ coordiated by non-bridging oxygens.

  20. Cost-effectiveness of decompression according to Gill versus instrumented spondylodesis in the treatment of sciatica due to low grade spondylolytic spondylolisthesis: A prospective randomised controlled trial [NTR1300

    NARCIS (Netherlands)

    M.P. Arts (Mark); M.J.T. Verstegen (Marco); R. Brand (René); B.W. Koes (Bart); M.E. van den Akker-van Marle (Elske); W.C. Peul (Wilco)

    2008-01-01

    textabstractBackground. Nerve root decompression with instrumented spondylodesis is the most frequently performed surgical procedure in the treatment of patients with symptomatic low-grade spondylolytic spondylolisthesis. Nerve root decompression without instrumented fusion, i.e. Gill's procedure,

  1. On high-pressure melting of tantalum

    Science.gov (United States)

    Luo, Sheng-Nian; Swift, Damian C.

    2007-01-01

    The issues related to high-pressure melting of Ta are discussed within the context of diamond-anvil cell (DAC) and shock wave experiments, theoretical calculations and common melting models. The discrepancies between the extrapolations of the DAC melting curve and the melting point inferred from shock wave experiments, cannot be reconciled either by superheating or solid-solid phase transition. The failure to reproduce low-pressure DAC melting curve by melting models such as dislocation-mediated melting and the Lindemann law, and molecular dynamics and quantum mechanics-based calculations, undermines their predictions at moderate and high pressures. Despite claims to the contrary, the melting curve of Ta (as well as Mo and W) remains inconclusive at high pressures.

  2. [Successful microvascular decompression of the medulla oblongata for a case with respiratory failure: case report].

    Science.gov (United States)

    Koguchi, Motofumi; Nakahara, Yukiko; Kawashima, Masatou; Takase, Yukinori; Matsushima, Toshio

    2011-11-01

    We report a case of the medulla oblongata syndrome successfully treated by microvascular decompression surgery. The patient was a 75-year-old woman and had been suffering from gradual progressive dyspnea since July, 2009. Two month later, intubation and medial ventilator treatments were began because of severe respiratory problems. The central respiratory problems were considered in extensive testing by the physician. The head MR imaging showed that the left vertebral artery had markedly compressed the medulla oblongata. We thought that her respiratory problems were associated with this vertebral artery compression of the medulla oblongata. We performed the microvascular decompression surgery by left trans-condylar fossa approach. Her hypoventilation graduately improved after the surgery and she needed neither ventilator nor oxygen in several months. She is able to perform daily activities by herself. We report the case, and discuss the cause of respiratory problems especially by compression of the medulla oblongata.

  3. Bubble formation after a 20-m dive: deep-stop vs. shallow-stop decompression profiles

    NARCIS (Netherlands)

    Schellart, Nico A. M.; Corstius, Jan-Jaap Brandt; Germonpré, Peter; Sterk, Wouter

    2008-01-01

    OBJECTIVES: It is claimed that performing a "deep stop," a stop at about half of maximal diving depth (MDD), can reduce the amount of detectable precordial bubbles after the dive and may thus diminish the risk of decompression sickness. In order to ascertain whether this reduction is caused by the

  4. Anterior versus lateral needle decompression of tension pneumothorax: comparison by computed tomography chest wall measurement.

    Science.gov (United States)

    Sanchez, Leon D; Straszewski, Shannon; Saghir, Amina; Khan, Atif; Horn, Erin; Fischer, Christopher; Khosa, Faisal; Camacho, Marc A

    2011-10-01

    Recent research describes failed needle decompression in the anterior position. It has been hypothesized that a lateral approach may be more successful. The aim of this study was to identify the optimal site for needle decompression. A retrospective study was conducted of emergency department (ED) patients who underwent computed tomography (CT) of the chest as part of their evaluation for blunt trauma. A convenience sample of 159 patients was formed by reviewing consecutive scans of eligible patients. Six measurements from the skin surface to the pleural surface were made for each patient: anterior second intercostal space, lateral fourth intercostal space, and lateral fifth intercostal space on the left and right sides. The distance from skin to pleura at the anterior second intercostal space averaged 46.3 mm on the right and 45.2 mm on the left. The distance at the midaxillary line in the fourth intercostal space was 63.7 mm on the right and 62.1 mm on the left. In the fifth intercostal space the distance was 53.8 mm on the right and 52.9 mm on the left. The distance of the anterior approach was statistically less when compared to both intercostal spaces (p < 0.01). With commonly available angiocatheters, the lateral approach is less likely to be successful than the anterior approach. The anterior approach may fail in many patients as well. Longer angiocatheters may increase the chances of decompression, but would also carry a higher risk of damage to surrounding vital structures. © 2011 by the Society for Academic Emergency Medicine.

  5. Effect of decompressive hemicraniectomy on mortality of malignant middle cerebral artery infarction

    OpenAIRE

    Bahram Aminmansour; Majeed Rezvany; Davood Sharifi; Hamidreza Shemshaki

    2010-01-01

    Background: Increasing intracranial pressure (ICP) is one of the leading causes of mortality in patients with malignant infarction of the middle cerebral artery (MCA). We prospectively evaluated patients with MCA infarction for one month survival after decompressive hemicraniectomy. Methods: This study was conducted at Alzahra University Hospital, Isfahan (Iran). Twenty patients with infarction in total MCA distribution area, resulting in midline shift of brain tissue for greater than 5mm...

  6. The Pathophysiology of Decompression Sickness and the Effects of Doppler Detectable Bubbles.

    Science.gov (United States)

    1980-12-18

    workers (Harvey, 1951a and 1951b) and Blinks, Twitty and Whiteker (1951) show that muscular activity was a 23 ~I. predisposing factor to the formation of...Hills, 1966), the mechanism of action is somewhat specific (neural distension ); but for those theories utilizing circulation and/or intravascular...highly perfused non- muscular tissue, such as kidney, forms a gas phase following decompression, Doppler perivascular cuff probes were surgically placed on

  7. Melt inclusions: Chapter 6

    Science.gov (United States)

    ,; Lowenstern, J. B.

    2014-01-01

    Melt inclusions are small droplets of silicate melt that are trapped in minerals during their growth in a magma. Once formed, they commonly retain much of their initial composition (with some exceptions) unless they are re-opened at some later stage. Melt inclusions thus offer several key advantages over whole rock samples: (i) they record pristine concentrations of volatiles and metals that are usually lost during magma solidification and degassing, (ii) they are snapshots in time whereas whole rocks are the time-integrated end products, thus allowing a more detailed, time-resolved view into magmatic processes (iii) they are largely unaffected by subsolidus alteration. Due to these characteristics, melt inclusions are an ideal tool to study the evolution of mineralized magma systems. This chapter first discusses general aspects of melt inclusions formation and methods for their investigation, before reviewing studies performed on mineralized magma systems.

  8. Sulfur diffusion in dacitic melt at various oxidation states: Implications for volcanic degassing

    Science.gov (United States)

    Lierenfeld, Matthias Bernhard; Zajacz, Zoltán; Bachmann, Olivier; Ulmer, Peter

    2018-04-01

    The diffusivity of S in a hydrous dacitic melt (4.5-6.0 wt.% H2O) has been investigated in the temperature (T) and pressure (P) range of 950 °C to 1100 °C and 200 to 250 MPa, respectively. Three series of experiments were conducted at relatively low oxygen fugacity (fO2) conditions [0.8 log units below fayalite-magnetite-quartz equilibrium (FMQ -0.8); referred to as "low fO2"] and high fO2 conditions (FMQ +2.5; referred to as "high fO2") to determine if the diffusivity of S is affected by its oxidation state and speciation. Sulfur concentration profiles were measured by electron microprobe and the diffusion coefficient (D) was calculated by fitting these profiles. Sulfur diffusion is approximately one order of magnitude faster when S is dominantly present as sulfide species (low fO2) in comparison to the sulfate dominated experiments (high fO2). The following Arrhenian equations were obtained for high and low fO2 conditions at 200 MPa: high fO2: D = 10-5.92±0.86 * exp ({-137.3±21.5 kJ/mol}/{RT}) low fO2: D = 10-5.18±1.39 * exp ({-125.7±34.4 kJ/mol}/{RT}) where D is the average diffusion coefficient in m2 s-1, R is the gas constant in 8.3144 J mol-1 K-1 and T is the temperature in K. Our results demonstrate for the first time in natural melts that S diffusion is strongly sensitive to fO2. Our S diffusivities under low fO2 conditions are only slightly slower of those found for H2O, suggesting that S can be rather efficiently purged from reduced dacitic melts during volcanic eruptions. However, for more oxidized systems (e.g. subduction zones), S diffusion will be much slower and will hinder equilibrium syn-eruptive degassing during rapid decompression. Therefore, we conclude that the "excess" measured during many explosive volcanic eruptions in arcs is dominantly derived from S-rich bubble accumulation in the eruptible portion of the magma reservoir.

  9. Decompression sickness in a vegetarian diver: are vegetarian divers at risk? A case report

    NARCIS (Netherlands)

    van Hulst, Robert A.; van der Kamp, Wim

    2010-01-01

    We present a case of a diver who suffered decompression sickness (DCS), but who also was a strict vegetarian for more than 10 years. He presented with symptoms of tingling of both feet and left hand, weakness in both legs and sensory deficits for vibration and propriocepsis after two deep dives with

  10. Application of small intestine decompression combined with oral feeding in middle and late period of malignant small bowel obstruction.

    Science.gov (United States)

    Li, Dechun; Du, Hongtao; Shao, Guoqing; Guo, Yongtuan; Lu, Wan; Li, Ruihong

    2017-07-01

    The application value of small intestine decompression combined with oral feeding in the middle and late period of malignant small bowel obstruction was examined. A total of 22 patients with advanced malignant small bowel obstruction were included in the present study. An ileus tube was inserted via the nose under fluoroscopy into the obstructed small intestine of each patient. At the same time, the insertion depth the of the catheter was adjusted. When the catheter was blocked, small bowel selective angiography was performed to determine the location and cause of the obstruction and the extent of the obstruction, and to determine the length of the small intestine in the site of obstruction, and to select the variety and tolerance of enteral nutrition. We observed the decompression tube flow and ease of intestinal obstruction. In total, 20 patients were treated with oral enteral nutrition after abdominal distension, and 22 cases were treated by the nose to observe the drainage and the relief of intestinal obstruction. The distal end of the catheter was placed in a predetermined position. The symptoms of intestinal obstruction were relieved 1-4 days after decompression. The 22 patients with selective angiography of the small intestine showed positive X-ray signs: 18 patients with oral enteral nutrition therapy had improved the nutritional situation 2 weeks later. In 12 cases, where there was anal defecation exhaust, 2 had transient removal of intestinal obstruction catheter. In conclusion, this comprehensive treatment based on small intestine decompression combined with enteral nutrition is expected to become a new therapeutic approach and method for the treatment of patients with advanced tumor small bowel obstruction.

  11. High-pressure melting curve of KCl: Evidence against lattice-instability theories of melting

    International Nuclear Information System (INIS)

    Ross, M.; Wolf, G.

    1986-01-01

    We show that the large curvature in the T-P melting curve of KCl is the result of a reordering of the liquid to a more densely packed arrangement. As a result theories of melting, such as the instability model, which do not take into account the structure of the liquid fail to predict the correct pressure dependence of the melting curve

  12. Keyhole craniotomy through retrosigmoid approach followed by microvascular decompression for primary trigeminal neuralgia:a report of 23 cases

    Directory of Open Access Journals (Sweden)

    Gang-ge CHENG

    2011-03-01

    Full Text Available Objective To explore the surgical technique,effects,and complications of keyhole craniotomy through retrosigmoid approach followed by microvascular decompression for primary trigeminal neuralgia.Methods The craniotomy with a keyhole incision above postauricular hairline followed by microvascular decompression was performed in 23 patients with primary trigeminal neuralgia.Dissection of intracranial part of trigeminal nerve under microscope was done to search for the offending vessels,which were thereby freed and between which and the root entry zone(REZ of trigeminal nerve the Teflon grafts were placed.Effects and complications were observed in follow-up,ranging from 1 month to 2 years.Results Out of 23 patients who were all found compression in REZ of trigeminal nerves by the offending vessels in operation,disappearance of symptoms post-surgery was found in 22 cases,face numbness on the surgical side in 3 cases and no effects in 1 case.Recurrence of pain was not observed in patients who had initially benefited from the surgery at the follow-up.Conclusion The keyhole craniotomy through retrosigmoid approach followed by microvascular decompression is safe and effective for primary trigeminal neuralgia,in which accurate technique during operation plays a vital role in the decrease of complications and the outcome post-surgery.

  13. A physiological model of the interaction between tissue bubbles and the formation of blood-borne bubbles under decompression

    International Nuclear Information System (INIS)

    Chappell, M A; Payne, S J

    2006-01-01

    Under decompression, bubbles can form in the human body, and these can be found both within the body tissues and the bloodstream. Mathematical models for the growth of both types of bubbles have previously been presented, but they have not been coupled together. This work thus explores the interaction between the growth of tissue and blood-borne bubbles under decompression, specifically looking at the extent to which they compete for the common resource of inert gas held in solution in the tissues. The influence of tissue bubbles is found to be significant for densities as low as 10 ml -1 for tissues which are poorly perfused. However, the effects of formation of bubbles in the blood are not found until the density of bubble production sites reaches 10 6 ml -1 . From comparison of the model predictions with experimental evidence for bubbles produced in animals and man under decompression, it is concluded that the density of tissue bubbles is likely to have a significant effect on the number of bubbles produced in the blood. However, the density of nucleation sites in the blood is unlikely to be sufficiently high in humans for the formation of bubbles in the blood to have a significant impact on the growth of the bubbles in the tissue

  14. Changes in peripapillary blood vessel density in Graves' orbitopathy after orbital decompression surgery as measured by optical coherence tomography angiography.

    Science.gov (United States)

    Lewis, Kyle T; Bullock, John R; Drumright, Ryan T; Olsen, Matthew J; Penman, Alan D

    2018-03-08

    The purpose is to evaluate the utility of optical coherence tomography (OCT) angiography in the evaluation of Graves' orbitopathy (GO) and response to orbital decompression in patients with and without dysthyroid optic neuropathy (DON). This was a single-center, prospective case series in a cohort of 12 patients (24 orbits) with GO and ±DON, (6 orbits) who underwent bilateral orbital decompression. All patients underwent pre- and postoperative OCT angiography of the peripapillary area. Vessel density indices were calculated in a 4.5 mm × 4.5 mm ellipsoid centered on the optic disk using split-spectrum amplitude decorrelation angiography algorithm, producing the vessel density measurements. Mean change in vessel density indices was compared between pre- and postoperative sessions and between patients with and without DON. Patient 1, a 34-year-old male with GO and unilateral DON OD, showed a significant reduction in blood vessel density indices oculus dexter (OD) (DON eye) after decompression while a more modest reduction was found oculus sinister (OS) with the greatest change noted intrapapillary. Patient 2, a 50-year-old male with DON OU, showed worsening neuropathy following decompression OD that was confirmed by angiographic density indices. Patient 3, a 55-year-female with DON, showed a reduction in blood vessel density OD and increased density OS. Patients without DON showed overall less impressive changes in indices as compared to those with DON. Using OCT angiography, response to surgical treatment in GO orbits, more so in orbits with DON, can be demonstrated and quantified using vessel density indices with reproducibility.

  15. Electron beam melting of sponge titanium

    International Nuclear Information System (INIS)

    Kanayama, Hiroshi; Kusamichi, Tatsuhiko; Muraoka, Tetsuhiro; Onouye, Toshio; Nishimura, Takashi

    1991-01-01

    Fundamental investigations were done on electron beam (EB) melting of sponge titanium by using 80 kW EB melting furnace. Results obtained are as follows: (1) To increase the melting yield of titanium in EB melting of sponge titanium, it is important to recover splashed metal by installation of water-cooled copper wall around the hearth and to decrease evaporation loss of titanium by keeping the surface temperature of molten metal just above the melting temperature of titanium without local heating. (2) Specific power consumption of drip melting of pressed sponge titanium bar and hearth melting of sponge titanium are approximately 0.9 kWh/kg-Ti and 0.5-0.7 kWh/kg-Ti, respectively. (3) Ratios of the heat conducted to water-cooled mould in the drip melting and to water-cooled hearth in the hearth melting to the electron beam input power are 50-65% and 60-65%, respectively. (4) Surface defects of EB-melted ingots include rap which occurs when the EB output is excessively great, and transverse cracks when the EB output is excessively small. To prevent surface defects, the up-down withdrawal method is effective. (author)

  16. Transferability of decompression wave speed measured by a small-diameter shock tube to full size pipelines and implications for determining required fracture propagation resistance

    International Nuclear Information System (INIS)

    Botros, K.K.; Geerligs, J.; Rothwell, Brian; Carlson, Lorne; Fletcher, Leigh; Venton, Philip

    2010-01-01

    The control of propagating ductile (or tearing) fracture is a fundamental requirement in the fracture control design of pipelines. The Battelle two-curve method developed in the early 1970s still forms the basis of the analytical framework used throughout the industry. GASDECOM is typically used for calculating decompression speed, and idealizes the decompression process as isentropic and one-dimensional, taking no account of frictional effects. While this approximation appears not to have been a major issue for large-diameter pipes and for moderate pressures (up to 12 MPa), there have been several recent full-scale burst tests at higher pressures and smaller diameters for which the measured decompression velocity has deviated progressively from the predicted values, in general towards lower velocities. The present research was focused on determining whether pipe diameter was a major factor that could limit the applicability of frictionless models such as GASDECOM. Since potential diameter effects are primarily related to wall friction, which in turn is related to the ratio of surface roughness-to-diameter, an experimental approach was developed based on keeping the diameter constant, at a sufficiently small value to allow for an economical experimental arrangement, and varying the internal roughness. A series of tests covering a range of nominal initial pressures from 10 to 21 MPa, and involving a very lean gas and three progressively richer compositions, were conducted using two specialized high-pressure shock tubes (42 m long, I.D. = 38.1 mm). The first is honed to an extremely smooth surface finish, in order to minimize frictional effects and better simulate the behaviour of larger-diameter pipelines, while the second has a higher internal surface roughness. The results show that decompression wave speeds in the rough tube are consistently slower than those in the smooth tube under the same conditions of mixture composition and initial pressure and temperature

  17. Melting point of yttria

    International Nuclear Information System (INIS)

    Skaggs, S.R.

    1977-06-01

    Fourteen samples of 99.999 percent Y 2 O 3 were melted near the focus of a 250-W CO 2 laser. The average value of the observed melting point along the solid-liquid interface was 2462 +- 19 0 C. Several of these same samples were then melted in ultrahigh-purity oxygen, nitrogen, helium, or argon and in water vapor. No change in the observed temperature was detected, with the exception of a 20 0 C increase in temperature from air to helium gas. Post test examination of the sample characteristics, clarity, sphericity, and density is presented, along with composition. It is suggested that yttria is superior to alumina as a secondary melting-point standard

  18. Surgical Decompression for Space-Occupying Cerebral Infarction: Outcomes at 3 Years in the Randomized HAMLET Trial

    NARCIS (Netherlands)

    Geurts, Marjolein; van der Worp, H. Bart; Kappelle, L. Jaap; Amelink, C. Johan; Algra, Ale; Hofmeijer, Jeannette

    2013-01-01

    Background and Purpose—We assessed whether the effects of surgical decompression for space-occupying hemispheric infarction, observed at 1 year, are sustained at 3 years. Methods—Patients with space-occupying hemispheric infarction, who were enrolled in the Hemicraniectomy After Middle cerebral

  19. Case Descriptions and Observations About Cutis Marmorata From Hypobaric Decompressions

    Science.gov (United States)

    Conkin, Johnny; Pilmanis, Andrew A.; Webb, James T.

    2002-01-01

    There is disagreement about the pathophysiology, classification, and treatment of cutis marmorata (CM), so there is disagreement about the disposition and medical status of a person that had CM. CM is rare, associated with stressful decompressions, and may be associated with serious signs and symptoms of decompression sickness (DCS). CM presents as purple or bluish-red skin mottling, often in the pectoral region, shoulders, chest, or upper abdomen. It is unethical to induce CM in humans so all information comes from retrospective analysis of case reports, or from animal models. A literature search, seven recent case reports from the Johnson Space Center and Brooks Air Force Base Hypobaric DCS Databases, interviews with DCS treatment experts, and responses to surveys provided the factual information used to arrive at our conclusions and recommendations. The "weight of evidence" indicates that CM is a local, not centrally mediated or systemic response to bubbles. It is unclear whether obstruction of arterial or venous blood flow is the primary insult since the lesion is reported under either condition. Any neurological or cardiovascular involvements are coincidental, developing along the same time course. The skin could be the source of the bubbles due to its mass, the associated layer of fat, and the variable nature of skin blood flow. CM should not be categorized as Type II DCS, should be included with other skin manifestations in a category called cutaneous DCS, and hyperbaric treatment is only needed if ground level oxygen is ineffective in the case of altitude-induced CM.

  20. Effect of oxygen breathing and perfluorocarbon emulsion treatment on air bubbles in adipose tissue during decompression sickness

    DEFF Research Database (Denmark)

    Randsoe, T; Hyldegaard, O

    2009-01-01

    Decompression sickness (DCS) after air diving has been treated with success by means of combined normobaric oxygen breathing and intravascular perfluorocarbon (PFC) emulsions causing increased survival rate and faster bubble clearance from the intravascular compartment. The beneficial PFC effect...... has been explained by the increased transport capacity of oxygen and inert gases in blood. However, previous reports have shown that extravascular bubbles in lipid tissue of rats suffering from DCS will initially grow during oxygen breathing at normobaric conditions. We hypothesize that the combined...... effect of normobaric oxygen breathing and intravascular PFC infusion could lead to either enhanced extravascular bubble growth on decompression due to the increased oxygen supply, or that PFC infusion could lead to faster bubble elimination due to the increased solubility and transport capacity in blood...

  1. [Decompression problems in diving in mountain lakes].

    Science.gov (United States)

    Bühlmann, A A

    1989-08-01

    The relationship between tolerated high-pressure tissue nitrogen and ambient pressure is practically linear. The tolerated nitrogen high pressure decreases at altitude, as the ambient pressure is lower. Additionally, tissues with short nitrogen half-times have a higher tolerance than tissues which retain nitrogen for longer duration. For the purpose of determining safe decompression routines, the human body can be regarded as consisting of 16 compartments with half-times from 4 to 635 minutes for nitrogen. The coefficients for calculation of the tolerated nitrogen-high pressure in the tissues can be deduced directly from the half-times for nitrogen. We show as application the results of 573 simulated air dives in the pressure-chamber and 544 real dives in mountain lakes in Switzerland (1400-2600 m above sea level) and in Lake Titicaca (3800 m above sea level). They are in accordance with the computed limits of tolerance.

  2. Method of melting solid waste

    International Nuclear Information System (INIS)

    Ootsuka, Katsuyuki; Mizuno, Ryokichi; Kuwana, Katsumi; Sawada, Yoshihisa; Komatsu, Fumiaki.

    1982-01-01

    Purpose: To enable the volume reduction treatment of a HEPA filter containing various solid wastes, particularly acid digestion residue, or an asbestos separator at a relatively low temperature range. Method: Solid waste to be heated and molten is high melting point material treated by ''acid digestion treatment'' for treating solid waste, e.g. a HEPA filter or polyvinyl chloride, etc. of an atomic power facility treated with nitric acid or the like. When this material is heated and molten by an electric furnace, microwave melting furnace, etc., boron oxide, sodium boride, sodium carbonate, etc. is added as a melting point lowering agent. When it is molten in this state, its melting point is lowered, and it becomes remarkably fluid, and the melting treatment is facilitated. Solidified material thus obtained through the melting step has excellent denseness and further large volume reduction rate of the solidified material. (Yoshihara, H.)

  3. Thermodynamics of Oligonucleotide Duplex Melting

    Science.gov (United States)

    Schreiber-Gosche, Sherrie; Edwards, Robert A.

    2009-01-01

    Melting temperatures of oligonucleotides are useful for a number of molecular biology applications, such as the polymerase chain reaction (PCR). Although melting temperatures are often calculated with simplistic empirical equations, application of thermodynamics provides more accurate melting temperatures and an opportunity for students to apply…

  4. Automatic Control of Silicon Melt Level

    Science.gov (United States)

    Duncan, C. S.; Stickel, W. B.

    1982-01-01

    A new circuit, when combined with melt-replenishment system and melt level sensor, offers continuous closed-loop automatic control of melt-level during web growth. Installed on silicon-web furnace, circuit controls melt-level to within 0.1 mm for as long as 8 hours. Circuit affords greater area growth rate and higher web quality, automatic melt-level control also allows semiautomatic growth of web over long periods which can greatly reduce costs.

  5. 2014 Decompression Sickness/Extravehicular Activity Risks Standing Review Panel

    Science.gov (United States)

    Steinberg, Susan; Mahon, Richard; Klaus, David; Neuman, Tom; Pilmanis, Andrew; Regis, David

    2014-01-01

    The 2014 Decompression Sickness (DCS)/Extravehicular Activity (EVA) Risks Standing Review Panel (from here on referred to as the SRP) met for a site visit in Houston, TX on November 4 - 5, 2014. The SRP reviewed the Research Plans for The Risk of Decompression Sickness and the Risk of Injury and Compromised Performance due to EVA Operations, as well as the Evidence Reports for both of these Risks. The SRP found that the NASA DCS/EVA team did an excellent job of presenting their research plans. The SRP considers it critical that NASA proceeds with the high priority tasks identified in this report (DCS1, DCS3, DCS5). The highest priority is to determine the acceptable DCS and hypoxia risk associated with the planned human exploration beyond low Earth orbit. The risk of DCS is highly dependent upon the pressure within the exploration vehicle. If slightly more hypoxia is permitted then (even with the same percentage of oxygen) the pressure within the exploration vehicle can be lowered thus further mitigating the risk of DCS. The second highest priority is to test and validate the recommended 8.2psi/34% O2 atmosphere. Development of procedures and equipment for human exploration missions are very limited until the results of this testing are completed. The SRP also suggests that DCS7 be separated into two Gaps. Gap DCS7 should deal with DCS treatment while a new Gap should be created to deal with the long-term effects of DCS. The SRP also encourages NASA to increase collaboration with other organizations and pool resources where possible. The current NASA DCS/EVA team has the extensive expertise and a wealth of knowledge in this area. The SRP suggests that increased manpower for this team would be highly productive.

  6. Melting of polydisperse hard disks

    NARCIS (Netherlands)

    Pronk, S.; Frenkel, D.

    2004-01-01

    The melting of a polydisperse hard-disk system is investigated by Monte Carlo simulations in the semigrand canonical ensemble. This is done in the context of possible continuous melting by a dislocation-unbinding mechanism, as an extension of the two-dimensional hard-disk melting problem. We find

  7. Early versus delayed decompression in acute subaxial cervical spinal cord injury: A prospective outcome study at a Level I trauma center from India

    OpenAIRE

    Gupta, Deepak Kumar; Vaghani, Gaurang; Siddiqui, Saquib; Sawhney, Chhavi; Singh, Pankaj Kumar; Kumar, Atin; Kale, S. S.; Sharma, B. S.

    2015-01-01

    Aims: This study was done with the aim to compare the clinical outcome and patients’ quality of life between early versus delayed surgically treated patients of acute subaxial cervical spinal cord injury. The current study was based on the hypothesis that early surgical decompression and fixations in acute subaxial cervical spinal cord trauma is safe and is associated with improved outcome as compared to delayed surgical decompression. Materials and Methods: A total of 69 patients were recrui...

  8. Persistent sciatica induced by quadratus femoris muscle tear and treated by surgical decompression: a case report

    Directory of Open Access Journals (Sweden)

    Tzanakakis George

    2010-08-01

    Full Text Available Abstract Introduction Quadratus femoris tear is an uncommon injury, which is only rarely reported in the literature. In the majority of cases the correct diagnosis is delayed due to non-specific symptoms and signs. A magnetic resonance imaging scan is crucial in the differential diagnosis since injuries to contiguous soft tissues may present with similar symptoms. Presentation with sciatica is not reported in the few cases existing in the English literature and the reported treatment has always been conservative. Case presentation We report here on a case of quadratus femoris tear in a 22-year-old Greek woman who presented with persistent sciatica. She was unresponsive to conservative measures and so was treated with surgical decompression. Conclusion The correct diagnosis of quadratus muscle tear is a challenge for physicians. The treatment is usually conservative, but in cases of persistent sciatica surgical decompression is an alternative option.

  9. Fluoxetine protection in decompression sickness in mice is enhanced by blocking TREK-1 potassium channel with the spadin antidepressant.

    Directory of Open Access Journals (Sweden)

    Nicolas eVallée

    2016-02-01

    Full Text Available In mice, disseminated coagulation, inflammation and ischemia induce neurological damages that can lead to the death. These symptoms result from circulating bubbles generated by a pathogenic decompression. An acute fluoxetine treatment or the presence of the TREK-1 potassium channel increased the survival rate when mice are subjected to an experimental dive/decompression protocol. This is a paradox because fluoxetine is a blocker of TREK-1 channels. First, we studied the effects of an acute dose of fluoxetine (50mg/kg in wild-type (WT and TREK-1 deficient mice (Knockout homozygous KO and heterozygous HET. Then, we combined the same fluoxetine treatment with a five-day treatment by spadin, in order to specifically block TREK-1 activity (KO-like mice. KO and KO-like mice could be regarded as antidepressed models.167 mice (45 WTcont 46 WTflux 30 HETflux and 46 KOflux constituting the flux-pool and 113 supplementary mice (27 KO-like 24 WTflux2 24 KO-likeflux 21 WTcont2 17 WTno dive constituting the spad-pool were included in this study. Only 7% of KO-TREK-1 treated with fluoxetine (KOflux and 4% of mice treated with both spadin and fluoxetine (KO-likeflux died from decompression sickness (DCS symptoms. These values are much lower than those of WT control (62% or KO-like mice (41%. After the decompression protocol, mice showed a significant consumption of their circulating platelets and leukocytes.Spadin antidepressed mice were more likely to declare DCS. Nevertheless, which had both blocked TREK-1 channel and were treated with fluoxetine were better protected against DCS. We conclude that the protective effect of such an acute dose of fluoxetine is enhanced when TREK-1 is inhibited. We confirmed that antidepressed models may have worse DCS outcomes, but a concomitant fluoxetine treatment not only decreases DCS severity but increases the survival rate.

  10. Impact of sagittal spinopelvic alignment on clinical outcomes after decompression surgery for lumbar spinal canal stenosis without coronal imbalance.

    Science.gov (United States)

    Hikata, Tomohiro; Watanabe, Kota; Fujita, Nobuyuki; Iwanami, Akio; Hosogane, Naobumi; Ishii, Ken; Nakamura, Masaya; Toyama, Yoshiaki; Matsumoto, Morio

    2015-10-01

    The object of this study was to investigate correlations between sagittal spinopelvic alignment and improvements in clinical and quality-of-life (QOL) outcomes after lumbar decompression surgery for lumbar spinal canal stenosis (LCS) without coronal imbalance. The authors retrospectively reviewed data from consecutive patients treated for LCS with decompression surgery in the period from 2009 through 2011. They examined correlations between preoperative or postoperative sagittal vertical axis (SVA) and radiological parameters, clinical outcomes, and health-related (HR)QOL scores in patients divided according to SVA. Clinical outcomes were assessed according to Japanese Orthopaedic Association (JOA) and visual analog scale (VAS) scores. Health-related QOL was evaluated using the Roland-Morris Disability Questionnaire (RMDQ) and the JOA Back Pain Evaluation Questionnaire (JOABPEQ). One hundred nine patients were eligible for inclusion in the study. Compared to patients with normal sagittal alignment prior to surgery (Group A: SVA imbalance (Group B: SVA ≥ 50 mm) had significantly smaller lumbar lordosis and thoracic kyphosis angles and larger pelvic tilt. In Group B, there was a significant decrease in postoperative SVA compared with the preoperative SVA (76.3 ± 29.7 mm vs. 54.3 ± 39.8 mm, p = 0.004). The patients in Group B with severe preoperative sagittal imbalance (SVA > 80 mm) had residual sagittal imbalance after surgery (82.8 ± 41.6 mm). There were no significant differences in clinical and HRQOL outcomes between Groups A and B. Compared to patients with normal postoperative SVA (Group C: SVA imbalance. Decompression surgery improved the SVA value in patients with preoperative sagittal imbalance; however, the patients with severe preoperative sagittal imbalance (SVA > 80 mm) had residual imbalance after decompression surgery. Both clinical and HRQOL outcomes were negatively affected by postoperative residual sagittal imbalance.

  11. Enduring improvement in Oswestry Disability Index outcomes following lumbar microscopic interlaminar decompression: An appraisal of prospectively collected patient outcomes.

    Science.gov (United States)

    Khan, Muhammad Babar; Bashir, Muhammad Umair; Kumar, Rajesh; Enam, Syed Ather

    2015-01-01

    Our present study aims to assess the short and long-term postoperative outcome of microscopic interlaminar decompression from a neurosurgical center in a developing country and also aims to further determine any predictors of functional outcome. All patients with moderate to severe symptomatic stenosis undergoing elective posterior lumbar spinal decompression were prospectively enrolled in a database. Preoperative, 2 weeks and 2 years postoperative Oswestry Disability Index (ODI) scores were determined for all patients. These scores were retrospectively compared using repeated measures analysis of variance. Further, linear regression modelling was applied to determine the effect of preoperative ODI, body mass index, age, prior physiotherapy, duration of symptoms, and single or multiple level decompression on the change in ODI at 2 weeks and 2 years follow-up respectively. A total of 60 consecutive patients (40 males, 20 females) were included for statistical analysis. The percentage of patients with a minimum clinically important difference (MCID), using an ODI threshold value of 10, was 86.7% (n = 52) at the 2 weeks postoperative follow-up. At the 2 years follow-up assessment, 3.3% (n = 2) patients who had earlier not achieved MCID did so, 78.3% (n = 47) of patients were found to have a change in ODI score of <10 or no change, while 18.3% (n = 11) reported a deterioration in their ODI scores. The preoperative ODI score was an independent predictor of change in ODI score at 2 weeks and 2 years respectively (P < 0.0005). The duration of symptoms prior to surgery was found to predict the change in ODI at 2 years follow-up (P = 0.04). The evidence regarding the long-term and short-term efficacy of microscopic interlaminar decompression in symptomatic lumbar stenosis is overwhelming. Preoperative ODI scores and duration of symptoms prior to surgery can predict postoperative outcomes.

  12. Urgent Optic Nerve Decompression via an Endoscopic Endonasal Transsphenoidal Approach for Craniopharyngioma in a 12-Month-Old Infant: A Case Report.

    Science.gov (United States)

    Shibata, Teishiki; Tanikawa, Motoki; Sakata, Tomohiro; Mase, Mitsuhito

    2018-01-01

    Craniopharyngiomas are benign tumors and account for approximately 5.6-13% of all intracranial tumors in children. Diagnosis of pediatric craniopharyngioma is often delayed until the tumor becomes relatively large and manifests severe visual and/or endocrine disturbance. Endoscopic endonasal approaches have recently been introduced to surgery for craniopharyngioma. These techniques, however, have rarely been utilized in patients affected with craniopharyngioma as young as 1 year old. This report documents a 12-month-old male infant with sellar craniopharyngioma who presented with acute total vision loss. To increase the chances of visual recovery, an endoscopic endonasal optic nerve decompression was performed as an urgent procedure. After decompression, which resulted in improvement of his visual disturbance, gross total resection of the tumor was undertaken through an anterior interhemispheric approach at a later date. Tumor mass reduction through an endoscopic endonasal transsphenoidal approach followed by secondary radical total resection under craniotomy was considered to be useful in cases such as this when urgent optic nerve decompression is required. © 2018 S. Karger AG, Basel.

  13. Single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation in surgical treatment for single-segment lumbar spinal tuberculosis

    OpenAIRE

    Zeng, Hao; Wang, Xiyang; Zhang, Penghui; Peng, Wei; Zhang, Yupeng; Liu, Zheng

    2015-01-01

    Objective: The aim of this study is to determine the feasibility and efficacy of surgical management of single-segment lumbar spinal tuberculosis (TB) by using single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation.Methods: Seventeen cases of single-segment lumbar TB were treated with single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reco...

  14. Melt cooling by bottom flooding: The experiment CometPC-H3. Ex-vessel core melt stabilization research

    International Nuclear Information System (INIS)

    Alsmeyer, H.; Cron, T.; Merkel, G.; Schmidt-Stiefel, S.; Tromm, W.; Wenz, T.

    2003-03-01

    The CometPC-H3 experiment was performed to investigate melt cooling by water addition to the bottom of the melt. The experiment was performed with a melt mass of 800 kg, 50% metal and 50% oxide, and 300 kW typical decay heat were simulated in the melt. As this was the first experiment after repair of the induction coil, attention was given to avoid overload of the induction coil and to keep the inductor voltage below critical values. Therefore, the height of the sacrificial concrete layer was reduced to 5 cm only, and the height of the porous concrete layers was also minimized to have a small distance and good coupling between heated melt and induction coil. After quite homogeneous erosion of the upper sacrificial concrete layer, passive bottom flooding started from the porous concrete after 220 s with 1.3 liter water/s. The melt was safely stopped, arrested and cooled. The porous, water filled concrete was only slightly attacked by the hot melt in the upper 25 mm of one sector of the coolant device. The peak cooling rate in the early contact phase of coolant water and melt was 4 MW/m 2 , and exceeded the decay heat by one order of magnitude. The cooling rate remarkably dropped, when the melt was covered by the penetrating water and a surface crust was formed. Volcanic eruptions from the melt during the solidification process were observed from 360 - 510 s and created a volcanic dome some 25 cm high, but had only minor effect on the generation of a porous structure, as the expelled melt solidified mostly with low porosity. Unfortunately, decay heat simulation in the melt was interrupted at 720 s by an incorrect safety signal, which excluded further investigation of the long term cooling processes. At that time, the melt was massively flooded by a layer of water, about 80 cm thick, and coolant water inflow was still 1 l/s. The melt had reached a stable situation: Downward erosion was stopped by the cooling process from the water filled, porous concrete layer. Top

  15. Different effect of l-NAME treatment on susceptibility to decompression sickness in male and female rats.

    Science.gov (United States)

    Mazur, Aleksandra; Buzzacott, Peter; Lambrechts, Kate; Wang, Qiong; Belhomme, Marc; Theron, Michael; Popov, Georgi; Distefano, Giovanni; Guerrero, Francois

    2014-11-01

    Vascular bubble formation results from supersaturation during inadequate decompression contributes to endothelial injuries, which form the basis for the development of decompression sickness (DCS). Risk factors for DCS include increased age, weight-fat mass, decreased maximal oxygen uptake, chronic diseases, dehydration, and nitric oxide (NO) bioavailability. Production of NO is often affected by diving and its expression-activity varies between the genders. Little is known about the influence of sex on the risk of DCS. To study this relationship we used an animal model of Nω-nitro-l-arginine methyl ester (l-NAME) to induce decreased NO production. Male and female rats with diverse ages and weights were divided into 2 groups: treated with l-NAME (in tap water; 0.05 mg·mL(-1) for 7 days) and a control group. To control the distribution of nitrogen among tissues, 2 different compression-decompression protocols were used. Results showed that l-NAME was significantly associated with increased DCS in female rats (p = 0.039) only. Weight was significant for both sexes (p = 0.01). The protocol with the highest estimated tissue pressures in the slower compartments was 2.6 times more likely to produce DCS than the protocol with the highest estimated tissue pressures in faster compartments. The outcome of this study had significantly different susceptibility to DCS after l-NAME treatment between the sexes, while l-NAME per se had no effect on the likelihood of DCS. The analysis also showed that for the appearance of DCS, the most significant factors were type of protocol and weight.

  16. Patent foramen ovale influences the presentation of decompression illness in SCUBA divers.

    Science.gov (United States)

    Liou, Kevin; Wolfers, Darren; Turner, Robert; Bennett, Michael; Allan, Roger; Jepson, Nigel; Cranney, Greg

    2015-01-01

    Few have examined the influence of patent foramen ovale (PFO) on the phenotype of decompression illness (DCI) in affected divers. A retrospective review of our database was performed for 75 SCUBA divers over a 10-year period. Overall 4,945 bubble studies were performed at our institution during the study period. Divers with DCI were more likely to have positive bubble studies than other indications (pAustralia and New Zealand (CSANZ). Published by Elsevier B.V. All rights reserved.

  17. Model of interfacial melting

    DEFF Research Database (Denmark)

    Mouritsen, Ole G.; Zuckermann, Martin J.

    1987-01-01

    A two-dimensional model is proposed to describe systems with phase transitions which take place in terms of crystalline as well as internal degrees of freedom. Computer simulation of the model shows that the interplay between the two sets of degrees of freedom permits observation of grain-boundar......-boundary formation and interfacial melting, a nonequilibrium process by which the system melts at the boundaries of a polycrystalline domain structure. Lipid membranes are candidates for systems with pronounced interfacial melting behavior....

  18. The Felix-trial. Double-blind randomization of interspinous implant or bony decompression for treatment of spinal stenosis related intermittent neurogenic claudication

    Directory of Open Access Journals (Sweden)

    Brand Ronald

    2010-05-01

    Full Text Available Abstract Background Decompressive laminotomy is the standard surgical procedure in the treatment of patients with canal stenosis related intermittent neurogenic claudication. New techniques, such as interspinous process implants, claim a shorter hospital stay, less post-operative pain and equal long-term functional outcome. A comparative (cost- effectiveness study has not been performed yet. This protocol describes the design of a randomized controlled trial (RCT on (cost- effectiveness of the use of interspinous process implants versus conventional decompression surgery in patients with lumbar spinal stenosis. Methods/Design Patients (age 40-85 presenting with intermittent neurogenic claudication due to lumbar spinal stenosis lasting more than 3 months refractory to conservative treatment, are included. Randomization into interspinous implant surgery versus bony decompression surgery will take place in the operating room after induction of anesthesia. The primary outcome measure is the functional assessment of the patient measured by the Zurich Claudication Questionnaire (ZCQ, at 8 weeks and 1 year after surgery. Other outcome parameters include perceived recovery, leg and back pain, incidence of re-operations, complications, quality of life, medical consumption, absenteeism and costs. The study is a randomized multi-institutional trial, in which two surgical techniques are compared in a parallel group design. Patients and research nurses are kept blinded of the allocated treatment during the follow-up period of 1 year. Discussion Currently decompressive laminotomy is the golden standard in the surgical treatment of lumbar spinal stenosis. Whether surgery with interspinous implants is a reasonable alternative can be determined by this trial. Trial register Dutch Trial register number: NTR1307

  19. Melt migration modeling in partially molten upper mantle

    Science.gov (United States)

    Ghods, Abdolreza

    The objective of this thesis is to investigate the importance of melt migration in shaping major characteristics of geological features associated with the partial melting of the upper mantle, such as sea-floor spreading, continental flood basalts and rifting. The partial melting produces permeable partially molten rocks and a buoyant low viscosity melt. Melt migrates through the partially molten rocks, and transfers mass and heat. Due to its much faster velocity and appreciable buoyancy, melt migration has the potential to modify dynamics of the upwelling partially molten plumes. I develop a 2-D, two-phase flow model and apply it to investigate effects of melt migration on the dynamics and melt generation of upwelling mantle plumes and focusing of melt migration beneath mid-ocean ridges. Melt migration changes distribution of the melt-retention buoyancy force and therefore affects the dynamics of the upwelling plume. This is investigated by modeling a plume with a constant initial melt of 10% where no further melting is considered. Melt migration polarizes melt-retention buoyancy force into high and low melt fraction regions at the top and bottom portions of the plume and therefore results in formation of a more slender and faster upwelling plume. Allowing the plume to melt as it ascends through the upper mantle also produces a slender and faster plume. It is shown that melt produced by decompressional melting of the plume migrates to the upper horizons of the plume, increases the upwelling velocity and thus, the volume of melt generated by the plume. Melt migration produces a plume which lacks the mushroom shape observed for the plume models without melt migration. Melt migration forms a high melt fraction layer beneath the sloping base of the impermeable oceanic lithosphere. Using realistic conditions of melting, freezing and melt extraction, I examine whether the high melt fraction layer is able to focus melt from a wide partial melting zone to a narrow region

  20. Utilization of steam- and explosion-decompressed aspen wood by some anaerobes

    Energy Technology Data Exchange (ETDEWEB)

    Khan, A W; Asther, M; Giuliano, C

    1984-01-01

    Tests made to study the suitability of using steam- and explosion-decompressed aspen wood as a substrate in anaerobic fermentations indicated that after washing with dilute NaOH it becomes less than 80% accessible to both mesophilic and thermophilic cellulolytic anaerobes and cellulases, compared with delignified, ball-milled pulp. After washing, this material was also suitable for the single-step conversion of cellulose to EtOH using cocultures consisting of cellulolytic and EtOH-producing saccharolytic anaerobes; and without and after washing by the use of cellulolytic enzymes and ethanologenic anaerobes.

  1. Posterior fossa reconstruction using titanium plate for the treatment of cerebellar ptosis after decompression for Chiari malformation.

    Science.gov (United States)

    Udani, Vikram; Holly, Langston T; Chow, Daniel; Batzdorf, Ulrich

    2014-01-01

    We describe our use of a perforated titanium plate to perform a partial posterior fossa cranioplasty in the treatment of cerebellar ptosis and dural ectasia after posterior fossa decompression (PFD). Twelve patients who had undergone PFD underwent posterior fossa reconstruction using a titanium plate. Symptoms were related to either descent of the cerebellum into the decompression or to dural ectasia into the craniectomy defect. Twelve patients who had undergone large suboccipital craniectomies and who presented with persistent headaches and some with neurological symptoms related to syringomyelia, underwent reoperation with placement of a small titanium plate. Ten of 12 patients showed symptomatic improvement after reoperation. Placement of a titanium plate appears to be an effective method of treatment of cerebellar ptosis and dural ectasia after PFD for Chiari malformation. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Can Nano-Particle Melt below the Melting Temperature of Its Free Surface Partner?

    International Nuclear Information System (INIS)

    Sui Xiao-Hong; Qin Shao-Jing; Wang Zong-Guo; Kang Kai; Wang Chui-Lin

    2015-01-01

    The phonon thermal contribution to the melting temperature of nano-particles is inspected. The discrete summation of phonon states and its corresponding integration form as an approximation for a nano-particle or for a bulk system have been analyzed. The discrete phonon energy levels of pure size effect and the wave-vector shifts of boundary conditions are investigated in detail. Unlike in macroscopic thermodynamics, the integration volume of zero-mode of phonon for a nano-particle is not zero, and it plays an important role in pure size effect and boundary condition effect. We find that a nano-particle will have a rising melting temperature due to purely finite size effect; a lower melting temperature bound exists for a nano-particle in various environments, and the melting temperature of a nano-particle with free boundary condition reaches this lower bound. We suggest an easy procedure to estimation the melting temperature, in which the zero-mode contribution will be excluded, and only several bulk quantities will be used as input. We would like to emphasize that the quantum effect of discrete energy levels in nano-particles, which is not present in early thermodynamic studies on finite size corrections to melting temperature in small systems, should be included in future researches. (condensed matter: structural, mechanical, and thermal properties)

  3. Documentation for the USAF School of Aerospace Medicine Altitude Decompression Sickness Research Database

    Science.gov (United States)

    2010-05-01

    identification during some database operations and that "t" and other such identifiers are dropped in the following headings to allow easier reading of the...chamber floor, the subject cranks at 24 rpm with 20-Watt resistance as read on the 50 rpm ergometer scale, switching hands each 2 pedal revolutions...Emboli DCS Decompression Sickness EKG /ECG Electrokardiograph (German), electrocardiograph (English) EVA Extravehicular Activity ICD Informed Consent

  4. Relative device stability of anterior versus axillary needle decompression for tension pneumothorax during casualty movement: Preliminary analysis of a human cadaver model.

    Science.gov (United States)

    Leatherman, Matthew L; Held, Jenny M; Fluke, Laura M; McEvoy, Christian S; Inaba, Kenji; Grabo, Daniel; Martin, Matthew J; Earley, Angela S; Ricca, Robert L; Polk, Travis M

    2017-07-01

    Tension pneumothorax (tPTX) remains a significant cause of potentially preventable death in military and civilian settings. The current prehospital standard of care for tPTX is immediate decompression with a 14-gauge 8-cm angiocatheter; however, failure rates may be as high as 17% to 60%. Alternative devices, such as 10-gauge angiocatheter, modified Veress needle, and laparoscopic trocar, have shown to be potentially more effective in animal models; however, little is known about the relative insertional safety or mechanical stability during casualty movement. Seven soft-embalmed cadavers were intubated and mechanically ventilated. Chest wall thickness was measured at the second intercostal space at the midclavicular line (2MCL) and the fifth intercostal space along the anterior axillary line (5AAL). CO2 insufflation created a PTX, and needle decompression was then performed with a randomized device. Insertional depth was measured between hub and skin before and after simulated casualty transport. Thoracoscopy was used to evaluate for intrapleural placement and/or injury during insertion and after movement. Cadaver demographics, device displacement, device dislodgment, and injuries were recorded. Three decompressions were performed at each site (2MCL/5AAL), totaling 12 events per cadaver. Eighty-four decompressions were performed. Average cadaver age was 59 years, and body mass index was 24 kg/m. The CWT varied between cadavers because of subcutaneous emphysema, but the average was 39 mm at the 2MCL and 31 mm at the 5AAL. Following movement, the 2MCL site was more likely to become dislodged than the 5AAL (67% vs. 17%, p = 0.001). Median displacement also differed between 2MCL and 5AAL (23 vs. 2 mm, p = 0.001). No significant differences were noted in dislodgement or displacement between devices. Five minor lung injuries were noted at the 5AAL position. Preliminary results from this human cadaver study suggest the 5AAL position is a more stable and reliable location

  5. Glaciation control of melting rates in the mantle: U-Th systematics of young basalts from Southern Siberia and Central Mongolia

    Science.gov (United States)

    Rasskazov, S.; Chebykin, E.

    2012-04-01

    Eastern Sayans, Siberia and Hangay, Central Mongolia are mountainous uplifts effected by Quaternary volcanism, but only the former area was covered by glaciers that were as thick as 500 m. Glaciation time intervals were marked by moraines and sub-glacial hyaloclastite-bearing volcanic edifices, whereas interglacial ones were exhibited by sub-aerial "valley" flows and cinder cones. To estimate temporal variations of maximum rates of melting and mantle upwelling in the glacial and glacial-free areas, we measured radionuclides of the U-Th system for 74 samples of the Middle-Late Pleistocene through Holocene basalts by ICP-MS technique (Chebykin et al. Russian Geol. Geophys. 2004. 45: 539-556) using mass-spectrometer Agilent 7500ce. The obtained U-Th isochron ages for the Pleistocene volcanic units in the age interval of the last 400 Kyr are mostly consistent with results of K-Ar dating. The measured (230Th/238U) ratios for the Holocene basalts from both areas are within the same range of 1.08-1.16 (parentheses denote units of activity), whereas the 50 Kyr lavas yield, respectively, the higher and lower initial (230Th0/238U) ratios (1.18-1.46 and 1.05-1.13). This discrepancy demonstrates contrast maximum rates of melting in conventional garnet peridotite sources. We suggest that this dynamical feature was provided by the abrupt Late Pleistocene deglaciation that caused the mantle decompression expressed by the earlier increasing melting beneath Eastern Sayans than beneath Hangay. In the last 400 Kyr, magmatic liquids from both Eastern Sayans and Hangay showed the overall temporal decreasing (230Th0/238U) (i.e. relative increasing rates of melting and upwelling of the mantle) with the systematically lower isotopic ratios (i.e. increased mantle activity) in the former area than in the latter. The 400 Kyr phonotephrites in Hangay showed elevated concentrations of Th (6-8 ppm) and Th/U (3.7-3.9). The high (230Th0/238U) (4.3-6.0) reflected slow fractional melting

  6. Force induced DNA melting

    International Nuclear Information System (INIS)

    Santosh, Mogurampelly; Maiti, Prabal K

    2009-01-01

    When pulled along the axis, double-strand DNA undergoes a large conformational change and elongates by roughly twice its initial contour length at a pulling force of about 70 pN. The transition to this highly overstretched form of DNA is very cooperative. Applying a force perpendicular to the DNA axis (unzipping), double-strand DNA can also be separated into two single-stranded DNA, this being a fundamental process in DNA replication. We study the DNA overstretching and unzipping transition using fully atomistic molecular dynamics (MD) simulations and argue that the conformational changes of double-strand DNA associated with either of the above mentioned processes can be viewed as force induced DNA melting. As the force at one end of the DNA is increased the DNA starts melting abruptly/smoothly above a critical force depending on the pulling direction. The critical force f m , at which DNA melts completely decreases as the temperature of the system is increased. The melting force in the case of unzipping is smaller compared to the melting force when the DNA is pulled along the helical axis. In the case of melting through unzipping, the double-strand separation has jumps which correspond to the different energy minima arising due to sequence of different base pairs. The fraction of Watson-Crick base pair hydrogen bond breaking as a function of force does not show smooth and continuous behavior and consists of plateaus followed by sharp jumps.

  7. Melting in super-earths.

    Science.gov (United States)

    Stixrude, Lars

    2014-04-28

    We examine the possible extent of melting in rock-iron super-earths, focusing on those in the habitable zone. We consider the energetics of accretion and core formation, the timescale of cooling and its dependence on viscosity and partial melting, thermal regulation via the temperature dependence of viscosity, and the melting curves of rock and iron components at the ultra-high pressures characteristic of super-earths. We find that the efficiency of kinetic energy deposition during accretion increases with planetary mass; considering the likely role of giant impacts and core formation, we find that super-earths probably complete their accretionary phase in an entirely molten state. Considerations of thermal regulation lead us to propose model temperature profiles of super-earths that are controlled by silicate melting. We estimate melting curves of iron and rock components up to the extreme pressures characteristic of super-earth interiors based on existing experimental and ab initio results and scaling laws. We construct super-earth thermal models by solving the equations of mass conservation and hydrostatic equilibrium, together with equations of state of rock and iron components. We set the potential temperature at the core-mantle boundary and at the surface to the local silicate melting temperature. We find that ancient (∼4 Gyr) super-earths may be partially molten at the top and bottom of their mantles, and that mantle convection is sufficiently vigorous to sustain dynamo action over the whole range of super-earth masses.

  8. Geochemical and isotopic characterization of the granitic magmatism along the Remígio - Pocinhos shear zone, Borborema Province, NE Brazil

    Science.gov (United States)

    de Lima, Jefferson V.; Guimarães, Ignez de P.; Santos, Lucilene; Amorim, José Victor A.; Farias, Douglas José S.

    2017-04-01

    Two granitoid plutons (Pilõezinhos and Curral de Cima) intruded along the Remígio - Pocinhos shear zone, eastern part of the Borborema Province. The Pilõezinhos and Curral de Cima granites were dated at 566 ± 3 Ma and 618 ± 5 Ma respectively. The granitoids from both plutons have distinct initial 143Nd/144Nd ratios, expressed by εNd(t) values, i.e. the granitoids of Pilõezinhos pluton have lower εNd(t) values (-15.47 to -15.81) and negative εHf (t = 570 Ma) values (-16.0 to -18.6), while the granitoids of the Curral de Cima pluton have εNd(t) values between -1.12 and -5.23. The granitoids of the Curral de Cima pluton are epidote bearing, magnesian calcalkaline I-type granitoids, crystallized under high fO2 conditions. The granitoids of the Pilõezinhos pluton are alkaline, low-fO2, ferroan, ilmenite-series, A2-type granite intrusions. The geochemical and isotopic signatures suggest that the origin of magma of the Curral de Cima granitoids involved mixing/mingling at depth between crustal and mantle magmas, associated to decompression (lateral escape) during the convergent stage of Brasiliano/Pan/African orogeny, which lead the asthenosphere melts to rise into the lower crust. The source of magma of the granitoids of the Pilõezinhos pluton involved a strong crustal component with geochemical and isotopic signatures similar to the orthogneisses of the Serrinha-Pedro Velho Complex, and small mantle component. The emplacement of the Pilõezinhos pluton is associated to an extensional space formed during high-T strike-slip shearing developed by the synchronic movement of the Matinhas sinistral shear zone and Remígio - Pocinhos dextral shear zone.

  9. Decompressive Abdominal Laparotomy for Abdominal Compartment Syndrome in an Unengrafted Bone Marrow Recipient with Septic Shock

    Directory of Open Access Journals (Sweden)

    Derrick J. N. Dauplaise

    2010-01-01

    Full Text Available Objective. To describe a profoundly immunocompromised (panleukopenia child with septic shock who developed abdominal compartment syndrome (ACS and was successfully treated with surgical decompression. Design. Individual case report. Setting. Pediatric intensive care unit of a tertiary children's hospital. Patient. A 32-month-old male with Fanconi anemia who underwent bone marrow transplantation (BMT 5 days prior to developing septic shock secondary to Streptococcus viridans and Escherichia coli ACS developed after massive fluid resuscitation, leading to cardiopulmonary instability. Interventions. Emergent surgical bedside laparotomy and silo placement. Measurements and Main Results. The patient's cardiopulmonary status stabilized after decompressive laparotomy. The abdomen was closed and the patient survived to hospital discharge without cardiac, respiratory, or renal dysfunction. Conclusions. The use of laparotomy and silo placement in an unengrafted BMT patient with ACS and septic shock did not result in additional complications. Surgical intervention for ACS is a reasonable option for high risk, profoundly immunocompromised patients.

  10. Assessment of Barotrauma Resulting from Rapid Decompression of Depth Acclimated Juvenile Chinook Salmon Bearing Radio Telemetry Transmitters

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Richard S.; Carlson, Thomas J.; Welch, Abigail E.; Stephenson, John R.; Abernethy, Cary S.; McKinstry, Craig A.; Theriault, Marie-Helene

    2007-09-06

    A multifactor study was conducted by Battelle for the US Army Corps of Engineers to assess the significance of the presence of a radio telemetry transmitter on the effects of rapid decompression from simulated hydro turbine passage on depth acclimated juvenile run-of-the-river Chinook salmon. Study factors were: (1) juvenile chinook salmon age;, subyearling or yearling, (2) radio transmitter present or absent, (3) three transmitter implantation factors: gastric, surgical, and no transmitter, and (4) four acclimation depth factors: 1, 10, 20, and 40 foot submergence equivalent absolute pressure, for a total of 48 unique treatments. Exposed fish were examined for changes in behavior, presence or absence of barotrauma injuries, and immediate or delayed mortality. Logistic models were used to test hypotheses that addressed study objectives. The presence of a radio transmitter was found to significantly increase the risk of barotrauma injury and mortality at exposure to rapid decompression. Gastric implantation was found to present a higher risk than surgical implantation. Fish were exposed within 48 hours of transmitter implantation so surgical incisions were not completely healed. The difference in results obtained for gastric and surgical implantation methods may be the result of study design and the results may have been different if tested fish had completely healed surgical wounds. However, the test did simulate the typical surgical-release time frame for in-river telemetry studies of fish survival so the results are probably representative for fish passing through a turbine shortly following release into the river. The finding of a significant difference in response to rapid decompression between fish bearing radio transmitters and those not implies a bias may exist in estimates of turbine passage survival obtained using radio telemetry. However, the rapid decompression (simulated turbine passage) conditions used for the study represented near worst case exposure

  11. Melting under shock compression

    International Nuclear Information System (INIS)

    Bennett, B.I.

    1980-10-01

    A simple model, using experimentally measured shock and particle velocities, is applied to the Lindemann melting formula to predict the density, temperature, and pressure at which a material will melt when shocked from room temperature and zero pressure initial conditions

  12. Phrenic nerve decompression for the management of unilateral diaphragmatic paralysis - preoperative evaluation and operative technique.

    Science.gov (United States)

    Hoshide, Reid; Brown, Justin

    2017-01-01

    Unilateral diaphragmatic paralysis (UDP) can be a very disabling, typically causing shortness of breath and reduced exercise tolerance. We present a case of a surgical decompression of the phrenic nerve of a patient who presented with UDP, which occurred following cervical spine surgery. The workup for the etiology of UDP demonstrated paradoxical movement on "sniff test" and notably impaired pulmonary function tests. Seven months following the onset of the UDP, he underwent a surgical decompression of the phrenic nerve at the level of the anterior scalene. He noted rapid symptomatic improvement following surgery and reversal of the above noted objective findings was documented. At his 4-year follow-up, he had complete resolution of his clinical symptoms. Repeated physiologic testing of his respiratory function had shown a complete reversal of his UDP. Anatomical compression of the phrenic nerve by redundant neck vasculature should be considered in the differential diagnosis of UDP. Here we demonstrated the techniques in workup and surgical management, with both subjective and objective evidence of success.

  13. Electric melting furnace of solidifying radioactive waste by utilizing magnetic field and melting method

    International Nuclear Information System (INIS)

    Igarashi, Hiroshi.

    1990-01-01

    An electric melting furnace for solidification of radioactive wastes utilizing magnetic fields in accordance with the present invention comprises a plurality of electrodes supplying AC current to molten glass in a glass melting furnace and a plurality of magnetic poles for generating AC magnetic fields. Interactions between the current and the magnetic field, generated forces in the identical direction in view of time in the molten glass. That is, forces for promoting the flow of molten glass in the melting furnace are resulted due to the Fleming's left-hand rule. As a result, the following effects can be obtained. (1) The amount of heat ransferred from the molten glass to the starting material layer on the molten surface is increased to improve the melting performance. (2) For an identical melting performance, the size and the weight of the melting furnace can be reduced to decrease the amount of secondary wastes when the apparatus-life is exhausted. (3) Bottom deposits can be suppressed and prevented from settling and depositing to the reactor bottom by the promoted flow in the layer. (4) Further, the size of auxiliary electrodes for directly supplying electric current to heat the molten glass near the reactor bottom can be decreased. (I.S.)

  14. Spinal Epidural Hematoma after Thoracolumbar Posterior Fusion Surgery without Decompression for Thoracic Vertebral Fracture

    Directory of Open Access Journals (Sweden)

    Tsuyoki Minato

    2016-01-01

    Full Text Available We present a rare case of spinal epidural hematoma (SEH after thoracolumbar posterior fusion without decompression surgery for a thoracic vertebral fracture. A 42-year-old man was hospitalized for a thoracic vertebral fracture caused by being sandwiched against his back on broken concrete block. Computed tomography revealed a T12 dislocation fracture of AO type B2, multiple bilateral rib fractures, and a right hemopneumothorax. Four days after the injury, in order to promote early orthostasis and to improve respiratory status, we performed thoracolumbar posterior fusion surgery without decompression; the patient had back pain but no neurological deficits. Three hours after surgery, he complained of acute pain and severe weakness of his bilateral lower extremities; with allodynia below the level of his umbilicus, postoperative SEH was diagnosed. We performed immediate revision surgery. After removal of the hematoma, his symptoms improved gradually, and he was discharged ambulatory one month after revision surgery. Through experience of this case, we should strongly consider the possibility of preexisting SEH before surgery, even in patients with no neurological deficits. We should also consider perioperative coagulopathy in patients with multiple trauma, as in this case.

  15. The potential role of perfluorocarbon emulsions in decompression illness.

    Science.gov (United States)

    Spiess, Bruce D

    2010-03-01

    Decompression illness (DCI) is an occasional occurrence in sport, professional, and military diving as well as a potential catastrophe in high-altitude flight, space exploration, mining, and caisson bridge construction. DCI theoretically could be a success-limiting problem in escape from a disabled submarine (DISSUB). Perfluorocarbon emulsions (PFCs) have previously been investigated as 'blood substitutes' with one approved by the United States Food and Drug Administration for the treatment of myocardial ischaemia. PFCs possess enhanced (as compared to plasma) respiratory gas solubility characteristics, including oxygen, nitrogen and carbon dioxide. This review examines approximately 30 years of research regarding the utilization of PFCs in gas embolism as well as experimental DCI. To date, no humans have been treated with PFCs for DCI.

  16. Cost-effectiveness of decompression according to Gill versus instrumented spondylodesis in the treatment of sciatica due to low grade spondylolytic spondylolisthesis: a prospective randomised controlled trial [NTR1300].

    Science.gov (United States)

    Arts, Mark P; Verstegen, Marco J T; Brand, Ronald; Koes, Bart W; van den Akker, M Elske; Peul, Wilco C

    2008-09-28

    Nerve root decompression with instrumented spondylodesis is the most frequently performed surgical procedure in the treatment of patients with symptomatic low-grade spondylolytic spondylolisthesis. Nerve root decompression without instrumented fusion, i.e. Gill's procedure, is an alternative and less invasive approach. A comparative cost-effectiveness study has not been performed yet. We present the design of a randomised controlled trial on cost-effectiveness of decompression according to Gill versus instrumented spondylodesis. All patients (age between 18 and 70 years) with sciatica or neurogenic claudication lasting more than 3 months due to spondylolytic spondylolisthesis grade I or II, are eligible for inclusion. Patients will be randomly allocated to nerve root decompression according to Gill, either unilateral or bilateral, or pedicle screw fixation with interbody fusion. The main primary outcome measure is the functional assessment of the patient measured with the Roland Disability Questionnaire for Sciatica at 12 weeks and 2 years. Other primary outcome measures are perceived recovery and intensity of leg pain and low back pain. The secondary outcome measures include, incidence of re-operations, complications, serum creatine phosphokinase, quality of life, medical consumption, costs, absenteeism, work perception, depression and anxiety, and treatment preference. The study is a randomised prospective multicenter trial in which two surgical techniques are compared in a parallel group design. Patients and research nurse will not be blinded during the follow-up period of 2 years. Currently, nerve root decompression with instrumented fusion is the golden standard in the surgical treatment of low-grade spondylolytic spondylolisthesis, although scientific proof justifying instrumented spondylodesis over simple decompression is lacking. This trial is designed to elucidate the controversy in best surgical treatment of symptomatic patients with low

  17. Cost-effectiveness of decompression according to Gill versus instrumented spondylodesis in the treatment of sciatica due to low grade spondylolytic spondylolisthesis: A prospective randomised controlled trial [NTR1300

    Directory of Open Access Journals (Sweden)

    Brand Ronald

    2008-09-01

    Full Text Available Abstract Background Nerve root decompression with instrumented spondylodesis is the most frequently performed surgical procedure in the treatment of patients with symptomatic low-grade spondylolytic spondylolisthesis. Nerve root decompression without instrumented fusion, i.e. Gill's procedure, is an alternative and less invasive approach. A comparative cost-effectiveness study has not been performed yet. We present the design of a randomised controlled trial on cost-effectiveness of decompression according to Gill versus instrumented spondylodesis. Methods/design All patients (age between 18 and 70 years with sciatica or neurogenic claudication lasting more than 3 months due to spondylolytic spondylolisthesis grade I or II, are eligible for inclusion. Patients will be randomly allocated to nerve root decompression according to Gill, either unilateral or bilateral, or pedicle screw fixation with interbody fusion. The main primary outcome measure is the functional assessment of the patient measured with the Roland Disability Questionnaire for Sciatica at 12 weeks and 2 years. Other primary outcome measures are perceived recovery and intensity of leg pain and low back pain. The secondary outcome measures include, incidence of re-operations, complications, serum creatine phosphokinase, quality of life, medical consumption, costs, absenteeism, work perception, depression and anxiety, and treatment preference. The study is a randomised prospective multicenter trial in which two surgical techniques are compared in a parallel group design. Patients and research nurse will not be blinded during the follow-up period of 2 years. Discussion Currently, nerve root decompression with instrumented fusion is the golden standard in the surgical treatment of low-grade spondylolytic spondylolisthesis, although scientific proof justifying instrumented spondylodesis over simple decompression is lacking. This trial is designed to elucidate the controversy in best

  18. Timing of Decompression in Patients With Acute Spinal Cord Injury: A Systematic Review

    OpenAIRE

    Wilson, Jefferson R.; Tetreault, Lindsay A.; Kwon, Brian K.; Arnold, Paul M.; Mroz, Thomas E.; Shaffrey, Christopher; Harrop, James S.; Chapman, Jens R.; Casha, Steve; Skelly, Andrea C.; Holmer, Haley K.; Brodt, Erika D.; Fehlings, Michael G.

    2017-01-01

    Study Design: Systematic review. Objective: To conduct a systematic review and synthesis of the literature to assess the comparative effectiveness, safety, and cost-effectiveness of early (≤24 hours) versus late decompression (>24 hours) in adults with acute spinal cord injury (SCI). Methods: A systematic search was conducted of Medline, EMBASE, the Cochrane Collaboration Library, and Google Scholar to identify studies published through November 6, 2014. Studies published in any language, in ...

  19. Temporary percutaneous T-fastener gastropexy and continuous decompressive gastrostomy in dogs with experimentally induced gastric dilatation.

    Science.gov (United States)

    Fox-Alvarez, W Alexander; Case, J Brad; Cooke, Kirsten L; Garcia-Pereira, Fernando L; Buckley, Gareth J; Monnet, Eric; Toskich, Beau B

    2016-07-01

    OBJECTIVE To evaluate a percutaneous, continuous gastric decompression technique for dogs involving a temporary T-fastener gastropexy and self-retaining decompression catheter. ANIMALS 6 healthy male large-breed dogs. PROCEDURES Dogs were anesthetized and positioned in dorsal recumbency with slight left-lateral obliquity. The gastric lumen was insufflated endoscopically until tympany was evident. Three T-fasteners were placed percutaneously into the gastric lumen via the right lateral aspect of the abdomen, caudal to the 13th rib and lateral to the rectus abdominis muscle. Through the center of the T-fasteners, a 5F locking pigtail catheter was inserted into the gastric lumen and attached to a device measuring gas outflow and intragastric pressure. The stomach was insufflated to 23 mm Hg, air was allowed to passively drain from the catheter until intraluminal pressure reached 5 mm Hg for 3 cycles, and the catheter was removed. Dogs were hospitalized and monitored for 72 hours. RESULTS Mean ± SD catheter placement time was 3.3 ± 0.5 minutes. Mean intervals from catheter placement to a ≥ 50% decrease in intragastric pressure and to ≤ 6 mm Hg were 2.1 ± 1.3 minutes and 8.4 ± 5.1 minutes, respectively. After catheter removal, no gas or fluid leakage at the catheter site was visible laparoscopically or endoscopically. All dogs were clinically normal 72 hours after surgery. CONCLUSIONS AND CLINICAL RELEVANCE The described technique was performed rapidly and provided continuous gastric decompression with no evidence of postoperative leakage in healthy dogs. Investigation is warranted to evaluate its effectiveness in dogs with gastric dilatation-volvulus.

  20. Melting in trivalent metal chlorides

    International Nuclear Information System (INIS)

    Saboungi, M.L.; Price, D.L.; Scamehorn, C.; Tosi, M.P.

    1990-11-01

    We report a neutron diffraction study of the liquid structure of YCl 3 and combine the structural data with macroscopic melting and transport data to contrast the behaviour of this molten salt with those of SrCl 2 , ZnCl 2 and AlCl 3 as prototypes of different melting mechanisms for ionic materials. A novel melting mechanism for trivalent metal chlorides, leading to a loose disordered network of edge-sharing octahedral units in the liquid phase, is thereby established. The various melting behaviours are related to bonding character with the help of Pettifor's phenomenological chemical scale. (author). 25 refs, 4 figs, 3 tabs

  1. [Arthroscopy-guided core decompression and bone grafting combined with selective arterial infusion for treatment of early stage avascular necrosis of femoral head].

    Science.gov (United States)

    Guo, Hao-Shan; Tian, Yi-Jun; Liu, Gang; An, Long; Zhou, Zhan-Guo; Liu, Huan-Zhen

    2018-01-25

    To observe the clinical effects of arthroscopy-guided core decompression and bone grafting combined with selective arterial infusion for early stage avascular necrosis of femoral head. From January 2010 to December 2014, 76 patients(76 hips) diagnosed as Ficat II stage avascular necrosis of femoral head were randomly divided into experimental group and control group. In the experimental group, there were 27 males and 8 females aged from 24 to 55 years old with an average of (43.96±6.81) years, treated with arthroscopic-guided core decompression and bone grafting combined with selective arterial infusion. Along the direction of the femoral neck, an 8 mm-diameter tunnel to necrotic areas was drilled, then curettage of necrotic bone was performed under arthroscope, and the iliac bone was grafted. In the control group, there were 29 males and 12 females aged from 26 to 56 years old with an average of (44.62±7.33) years, treated with percutaneous core decompression combined with selective arterial infusion. The preoperative and postoperative Harris scores were recorded and the changes of X-rays were analyzed. All the patients were followed up with an average of 30 months. Postoperative follow-up at 12 months showed that there was significant difference in imaging outcome between two groups( P 0.05), but there was significant difference in postoperative Harris score( P necrosis are effective. Using arthroscopic-guided core decompression method, the necrotic bone can be positioned and scraped more accurately, and can obtain better results. Copyright© 2018 by the China Journal of Orthopaedics and Traumatology Press.

  2. How low can they go when going with the flow? Tolerance of egg and larval fishes to rapid decompression

    Energy Technology Data Exchange (ETDEWEB)

    Boys, Craig A.; Robinson, Wayne; Miller, Brett; Pflugrath, Brett; Baumgartner, Lee J.; Navarro, Anna; Brown, Richard; Deng, Zhiqun

    2016-05-26

    Egg and larval fish that drift downstream are likely to encounter river infrastructure and consequently rapid decompression, which may result in significant injury. In juvenile fish, pressure-related injury (or barotrauma) occurs when pressures fall sufficiently below the pressure at which the fish has acclimated. Because eggs and larvae are less-developed and more fragile than juveniles, there is a presumption that they may be at least as, if not more, susceptible to barotrauma injury, but studies to date report inconsistent results and none have considered the relationship between pressure change and barotrauma over a sufficiently broad range of pressure changes to enable detrimental levels to be properly determined. To address this, we exposed eggs and larvae of three physoclistic species to rapid decompression in a barometric chamber over a broad range of discrete pressure changes. Eggs, but not larvae, were unaffected by all levels of decompression tested. At exposure pressures below ~40 kPa, or ~40% of atmospheric pressure, swim bladder deflation occurred in all species and internal haemorrhage was observed in one species. None of these injuries killed the fish within 24 hours, but subsequent mortality cannot be excluded. Consequently, if larval drift is expected, it seems prudent to maintain exposure pressures at river infrastructure at 40% or more of the pressure to which a drifting larvae has acclimated.

  3. Premixing and steam explosion phenomena in the tests with stratified melt-coolant configuration and binary oxidic melt simulant materials

    Energy Technology Data Exchange (ETDEWEB)

    Kudinov, Pavel, E-mail: pavel@safety.sci.kth.se; Grishchenko, Dmitry, E-mail: dmitry@safety.sci.kth.se; Konovalenko, Alexander, E-mail: kono@kth.se; Karbojian, Aram, E-mail: karbojan@kth.se

    2017-04-01

    Highlights: • Steam explosion in stratified melt-coolant configuration is studied experimentally. • Different binary oxidic melt simulant materials were used. • Five spontaneous steam explosions were observed. • Instability of melt-coolant interface and formation of premixing layer was observed. • Explosion strength is influenced by melt superheat and water subcooling. - Abstract: Steam explosion phenomena in stratified melt-coolant configuration are considered in this paper. Liquid corium layer covered by water on top can be formed in severe accident scenarios with (i) vessel failure and release of corium melt into a relatively shallow water pool; (ii) with top flooding of corium melt layer. In previous assessments of potential energetics in stratified melt-coolant configuration, it was assumed that melt and coolant are separated by a stable vapor film and there is no premixing prior to the shock wave propagation. This assumption was instrumental for concluding that the amount of energy that can be released in such configuration is not of safety importance. However, several recent experiments carried out in Pouring and Under-water Liquid Melt Spreading (PULiMS) facility with up to 78 kg of binary oxidic corium simulants mixtures have resulted in spontaneous explosions with relatively high conversion ratios (order of one percent). The instability of the melt-coolant interface, melt splashes and formation of premixing layer were observed in the tests. In this work, we present results of experiments carried out more recently in steam explosion in stratified melt-coolant configuration (SES) facility in order to shed some light on the premixing phenomena and assess the influence of the test conditions on the steam explosion energetics.

  4. Melting of superheated molecular crystals

    Science.gov (United States)

    Cubeta, Ulyana; Bhattacharya, Deepanjan; Sadtchenko, Vlad

    2017-07-01

    Melting dynamics of micrometer scale, polycrystalline samples of isobutane, dimethyl ether, methyl benzene, and 2-propanol were investigated by fast scanning calorimetry. When films are superheated with rates in excess of 105 K s-1, the melting process follows zero-order, Arrhenius-like kinetics until approximately half of the sample has transformed. Such kinetics strongly imply that melting progresses into the bulk via a rapidly moving solid-liquid interface that is likely to originate at the sample's surface. Remarkably, the apparent activation energies for the phase transformation are large; all exceed the enthalpy of vaporization of each compound and some exceed it by an order of magnitude. In fact, we find that the crystalline melting kinetics are comparable to the kinetics of dielectric α-relaxation in deeply supercooled liquids. Based on these observations, we conclude that the rate of non-isothermal melting for superheated, low-molecular-weight crystals is limited by constituent diffusion into an abnormally dense, glass-like, non-crystalline phase.

  5. Pressure melting and ice skating

    Science.gov (United States)

    Colbeck, S. C.

    1995-10-01

    Pressure melting cannot be responsible for the low friction of ice. The pressure needed to reach the melting temperature is above the compressive failure stress and, if it did occur, high squeeze losses would result in very thin films. Pure liquid water cannot coexist with ice much below -20 °C at any pressure and friction does not increase suddenly in that range. If frictional heating and pressure melting contribute equally, the length of the wetted contact could not exceed 15 μm at a speed of 5 m/s, which seems much too short. If pressure melting is the dominant process, the water films are less than 0.08 μm thick because of the high pressures.

  6. Dynamics of gas bubble growth in oil-refrigerant mixtures under isothermal decompression

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Joao Paulo; Barbosa Junior, Jader R.; Prata, Alvaro T. [Federal University of Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. of Mechanical Engineering], Emails: jpdias@polo.ufsc.br, jrb@polo.ufsc.br, prata@polo.ufsc.br

    2010-07-01

    This paper proposes a numerical model to predict the growth of gaseous refrigerant bubbles in oil-refrigerant mixtures with high contents of oil subjected to isothermal decompression. The model considers an Elementary Cell (EC) in which a spherical bubble is surrounded by a concentric and spherical liquid layer containing a limited amount of dissolved liquid refrigerant. The pressure reduction in the EC generates a concentration gradient at the bubble interface and the refrigerant is transported to the bubble by molecular diffusion. After a sufficiently long period of time, the concentration gradient in the liquid layer and the bubble internal pressure reach equilibrium and the bubble stops growing, having attained its stable radius. The equations of momentum and chemical species conservation for the liquid layer, and the mass balance at the bubble interface are solved via a coupled finite difference procedure to determine the bubble internal pressure, the refrigerant radial concentration distribution and the bubble growth rate. Numerical results obtained for a mixture of ISO VG10 ester oil and refrigerant HFC-134a showed that bubble growth dynamics depends on model parameters like the initial bubble radius, initial refrigerant concentration in the liquid layer, decompression rate and EC temperature. Despite its simplicity, the model showed to be a potential tool to predict bubble growth and foaming which may result from important phenomena occurring inside refrigeration compressors such as lubrication of sliding parts and refrigerant degassing from the oil stored in oil sump during compressor start-up. (author)

  7. Filament stretching rheometry of polymer melts

    DEFF Research Database (Denmark)

    Hassager, Ole; Nielsen, Jens Kromann; Rasmussen, Henrik Koblitz

    2005-01-01

    The Filament Stretching Rheometry (FSR) method developed by Sridhar, McKinley and coworkers for polymer solutions has been extended to be used also for polymer melts. The design of a melt-FSR will be described and differences to conventional melt elongational rheometers will be pointed out. Results...

  8. Melting temperature of graphite

    International Nuclear Information System (INIS)

    Korobenko, V.N.; Savvatimskiy, A.I.

    2001-01-01

    Full Text: Pulse of electrical current is used for fast heating (∼ 1 μs) of metal and graphite specimens placed in dielectric solid media. Specimen consists of two strips (90 μm in thick) placed together with small gap so they form a black body model. Quasy-monocrystal graphite specimens were used for uniform heating of graphite. Temperature measurements were fulfilled with fast pyrometer and with composite 2-strip black body model up to melting temperature. There were fulfilled experiments with zirconium and tungsten of the same black body construction. Additional temperature measurements of liquid zirconium and liquid tungsten are made. Specific heat capacity (c P ) of liquid zirconium and of liquid tungsten has a common feature in c P diminishing just after melting. It reveals c P diminishing after melting in both cases over the narrow temperature range up to usual values known from steady state measurements. Over the next wide temperature range heat capacity for W (up to 5000 K) and Zr (up to 4100 K) show different dependencies of heat capacity on temperature in liquid state. The experiments confirmed a high quality of 2-strip black body model used for graphite temperature measurements. Melting temperature plateau of tungsten (3690 K) was used for pyrometer calibration area for graphite temperature measurement. As a result, a preliminary value of graphite melting temperature of 4800 K was obtained. (author)

  9. Contribution to the study of heat transfer coefficients during the decompression of a water cooled heating tube

    International Nuclear Information System (INIS)

    Bonneton, Michel.

    1980-02-01

    The main correlations likely to be suitable for describing heat transfers between the fluid and wall during decompression are analyzed. The most important experimental work on the boiling crisis in the transient regime is presented. Experimental studies are then treated. The test installation (OMEGA experiment), the instumentation used and the experiments realized are described. The purpose of these experiments was to establish heat exchange laws for decompression conditions. Local and instantaneous exchange coefficients were determined in a heated test section together with the thermohydraulic parameters of the flow. The methods used to investigate the measurements made and to analyze their validity are described. Finally, the test results are presented and discussed. It is shown that under certain conditions, the boiling crisis can be determined with a permanent regime correlation. An attempt is made to establish a correlation for the transition boiling zone from these results. A test reconstitution calculation based on a two-fluid model is presented [fr

  10. Theoretical melting curve of caesium

    International Nuclear Information System (INIS)

    Simozar, S.; Girifalco, L.A.; Pennsylvania Univ., Philadelphia

    1983-01-01

    A statistical-mechanical model is developed to account for the complex melting curve of caesium. The model assumes the existence of three different species of caesium defined by three different electronic states. On the basis of this model, the free energy of melting and the melting curve are computed up to 60 kbar, using the solid-state data and the initial slope of the fusion curve as input parameters. The calculated phase diagram agrees with experiment to within the experimental error. Other thermodynamic properties including the entropy and volume of melting were also computed, and they agree with experiment. Since the theory requires only one adjustable constant, this is taken as strong evidence that the three-species model is satisfactory for caesium. (author)

  11. Visualization and void fraction measurement of decompressed boiling flow in a capillary tube

    International Nuclear Information System (INIS)

    Asano, H.; Murakawa, H.; Takenaka, N.; Takiguchi, K.; Okamoto, M.; Tsuchiya, T.; Kitaide, Y.; Maruyama, N.

    2011-01-01

    A capillary tube is often used as a throttle for a refrigerating cycle. Subcooled refrigerant usually flows from a condenser into the capillary tube. Then, the refrigerant is decompressed along the capillary tube. When the static pressure falls below the saturation pressure for the liquid temperature, spontaneous boiling occurs. A vapor-liquid two-phase mixture is discharged from the tube. In designing a capillary tube, it is necessary to calculate the flow rate for given boundary conditions on pressure and temperature at the inlet and exit. Since total pressure loss is dominated by frictional and acceleration losses during two-phase flow, it is first necessary to specify the boiling inception point. However, there will be a delay in boiling inception during decompressed flow. This study aimed to clarify the boiling inception point and two-phase flow characteristics of refrigerant in a capillary tube. Refrigerant flows in a coiled copper capillary tube were visualized by neutron radiography. The one-dimensional distribution of volumetric average void fraction was measured from radiographs through image processing. From the void fraction distribution, the boiling inception point was determined. Moreover, a simplified CT method was successfully applied to a radiograph for cross-sectional measurements. The experimental results show the flow pattern transition from intermittent flow to annular flow that occurred at a void fraction of about 0.45.

  12. Mantle melting and melt refertilization beneath the Southwest Indian Ridge: Mineral composition of abyssal peridotites

    Science.gov (United States)

    Chen, Ling; Zhu, Jihao; Chu, Fengyou; Dong, Yan-hui; Liu, Jiqiang; Li, Zhenggang; Zhu, Zhimin; Tang, Limei

    2017-04-01

    As one of the slowest spreading ridges of the global ocean ridge system, the Southwest Indian Ridge (SWIR) is characterized by discontinued magmatism. The 53°E segment between the Gallieni fracture zone (FZ) (52°20'E) and the Gazelle FZ (53°30'E) is a typical amagmatic segment (crustal thickness 1cm) Opx, and Mg-rich mineral compositions akin to harzburgite xenoliths that sample old continental lithospheric mantle (Kelemen et al., 1998). Melt refertilization model shows that Group 2 peridotites were affected by an enriched low-degree partial melt from the garnet stability field. These results indicate that depleted mantle which experiences ancient melting event are more sensitive to melt refertilization, thus may reduce the melt flux, leading to extremely thin crust at 53°E segment. This research was granted by the National Basic Research Programme of China (973 programme) (grant No. 2013CB429705) and the Fundamental Research Funds of Second Institute of Oceanography, State Oceanic Administration (JG1603, SZ1507). References: Johnson K T M, Dick H J B, Shimizu N. Melting in the oceanic upper mantle: An ion microprobe study of diopsides in abyssal peridotites[J]. Journal of Geophysical Research, 1990, 95(B3):2661-2678. Kelemen P B, Hart S R, Bernstein S. Silica enrichment in the continental upper mantle via melt/rock reaction[J]. Earth & Planetary Science Letters, 1998, 164(1-2):387-406. Zhou H, Dick H J. Thin crust as evidence for depleted mantle supporting the Marion Rise.[J]. Nature, 2013, 494(7436):195-200.

  13. Melts of garnet lherzolite: experiments, models and comparison to melts of pyroxenite and carbonated lherzolite

    Science.gov (United States)

    Grove, Timothy L.; Holbig, Eva S.; Barr, Jay A.; Till, Christy B.; Krawczynski, Michael J.

    2013-01-01

    Phase equilibrium experiments on a compositionally modified olivine leucitite from the Tibetan plateau have been carried out from 2.2 to 2.8 GPa and 1,380–1,480 °C. The experiments-produced liquids multiply saturated with spinel and garnet lherzolite phase assemblages (olivine, orthopyroxene, clinopyroxene and spinel ± garnet) under nominally anhydrous conditions. These SiO2-undersaturated liquids and published experimental data are utilized to develop a predictive model for garnet lherzolite melting of compositionally variable mantle under anhydrous conditions over the pressure range of 1.9–6 GPa. The model estimates the major element compositions of garnet-saturated melts for a range of mantle lherzolite compositions and predicts the conditions of the spinel to garnet lherzolite phase transition for natural peridotite compositions at above-solidus temperatures and pressures. We compare our predicted garnet lherzolite melts to those of pyroxenite and carbonated lherzolite and develop criteria for distinguishing among melts of these different source types. We also use the model in conjunction with a published predictive model for plagioclase and spinel lherzolite to characterize the differences in major element composition for melts in the plagioclase, spinel and garnet facies and develop tests to distinguish between melts of these three lherzolite facies based on major elements. The model is applied to understand the source materials and conditions of melting for high-K lavas erupted in the Tibetan plateau, basanite–nephelinite lavas erupted early in the evolution of Kilauea volcano, Hawaii, as well as younger tholeiitic to alkali lavas from Kilauea.

  14. Phrenic nerve decompression for the management of unilateral diaphragmatic paralysis – preoperative evaluation and operative technique

    Science.gov (United States)

    Hoshide, Reid; Brown, Justin

    2017-01-01

    Background: Unilateral diaphragmatic paralysis (UDP) can be a very disabling, typically causing shortness of breath and reduced exercise tolerance. We present a case of a surgical decompression of the phrenic nerve of a patient who presented with UDP, which occurred following cervical spine surgery. Methods: The workup for the etiology of UDP demonstrated paradoxical movement on “sniff test” and notably impaired pulmonary function tests. Seven months following the onset of the UDP, he underwent a surgical decompression of the phrenic nerve at the level of the anterior scalene. Results: He noted rapid symptomatic improvement following surgery and reversal of the above noted objective findings was documented. At his 4-year follow-up, he had complete resolution of his clinical symptoms. Repeated physiologic testing of his respiratory function had shown a complete reversal of his UDP. Conclusions: Anatomical compression of the phrenic nerve by redundant neck vasculature should be considered in the differential diagnosis of UDP. Here we demonstrated the techniques in workup and surgical management, with both subjective and objective evidence of success. PMID:29184705

  15. Material properties influence on steam explosion efficiency. Prototypic versus simulant melts, eutectic versus non-eutectic melts

    International Nuclear Information System (INIS)

    Leskovar, M.; Mavko, B.

    2006-01-01

    A steam explosion may occur during a severe nuclear reactor accident if the molten core comes into contact with the coolant water. A strong enough steam explosion in a nuclear power plant could jeopardize the containment integrity and so lead to a direct release of radioactive material to the environment. Details of processes taking place prior and during the steam explosion have been experimentally studied for a number of years with adjunct efforts in modelling these processes to address the scaling of these experiments. Steam explosion experiments have shown that there are important differences of behaviour between simulant and prototypical melts, and that also at prototypical melts the fuel coolant interactions depend on the composition of the corium. In experiments with prototypic materials no spontaneous steam explosions occurred (except with an eutectic composition), whereas with simulant materials the steam explosions were triggered spontaneously. The energy conversion ratio of steam explosions with prototypic melts is at least one order of magnitude lower than the energy conversion ratio of steam explosions with simulant melts. Although the different behaviour of prototypic and simulant melts has been known for a number of years, there is no reliable explanation for these differences. Consequently it is not possible to reliably estimate whether corium would behave so non-explosive also in reactor conditions, where the mass of poured melt is nearly three orders of magnitude larger than in experimental conditions. An even more fascinating material effect was observed recently at corium experiments with eutectic and non-eutectic compositions. It turned out that eutectic corium always exploded spontaneously, whereas non-eutectic corium never exploded spontaneously. In the paper, a possible explanation of both material effects (prototypic/simulant melts, eutectic/non-eutectic corium) on the steam explosion is provided. A model for the calculation of the

  16. Numerical simulation of hot-melt extrusion processes for amorphous solid dispersions using model-based melt viscosity.

    Science.gov (United States)

    Bochmann, Esther S; Steffens, Kristina E; Gryczke, Andreas; Wagner, Karl G

    2018-03-01

    Simulation of HME processes is a valuable tool for increased process understanding and ease of scale-up. However, the experimental determination of all required input parameters is tedious, namely the melt rheology of the amorphous solid dispersion (ASD) in question. Hence, a procedure to simplify the application of hot-melt extrusion (HME) simulation for forming amorphous solid dispersions (ASD) is presented. The commercial 1D simulation software Ludovic ® was used to conduct (i) simulations using a full experimental data set of all input variables including melt rheology and (ii) simulations using model-based melt viscosity data based on the ASDs glass transition and the physical properties of polymeric matrix only. Both types of HME computation were further compared to experimental HME results. Variation in physical properties (e.g. heat capacity, density) and several process characteristics of HME (residence time distribution, energy consumption) among the simulations and experiments were evaluated. The model-based melt viscosity was calculated by using the glass transition temperature (T g ) of the investigated blend and the melt viscosity of the polymeric matrix by means of a T g -viscosity correlation. The results of measured melt viscosity and model-based melt viscosity were similar with only few exceptions, leading to similar HME simulation outcomes. At the end, the experimental effort prior to HME simulation could be minimized and the procedure enables a good starting point for rational development of ASDs by means of HME. As model excipients, Vinylpyrrolidone-vinyl acetate copolymer (COP) in combination with various APIs (carbamazepine, dipyridamole, indomethacin, and ibuprofen) or polyethylene glycol (PEG 1500) as plasticizer were used to form the ASDs. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Melt processed high-temperature superconductors

    CERN Document Server

    1993-01-01

    The achievement of large critical currents is critical to the applications of high-temperature superconductors. Recent developments have shown that melt processing is suitable for producing high J c oxide superconductors. Using magnetic forces between such high J c oxide superconductors and magnets, a person could be levitated.This book has grown largely out of research works on melt processing of high-temperature superconductors conducted at ISTEC Superconductivity Research Laboratory. The chapters build on melt processing, microstructural characterization, fundamentals of flux pinning, criti

  18. Surgical decompression of thoracic spinal stenosis in achondroplasia: indication and outcome.

    Science.gov (United States)

    Vleggeert-Lankamp, Carmen; Peul, Wilco

    2012-08-01

    The achondroplastic spinal canal is narrow due to short pedicles and a small interpedicular distance. Compression of neural structures passing through this canal is therefore regularly encountered but rarely described. Symptomatology, radiological evaluation, and treatment of 20 patients with achondroplasia who underwent decompression of the thoracic spinal cord are described and outcome is correlated with the size of the spinal canal and the thoracolumbar kyphotic angle. Scores from the modified Japanese Orthopaedic Association scale, Nurick scale, European Myelopathy scale, Cooper myelopathy scale for lower extremities, and Odom criteria before and after surgery were compared. Magnetic resonance imaging was evaluated to determine the size of the spinal canal, spinal cord compression, and presence of myelomalacia. The thoracolumbar kyphotic angle was measured using fluoroscopy. Patient symptomatology included deterioration of walking pattern, pain, cramps, spasms, and incontinence. Magnetic resonance images of all patients demonstrated spinal cord compression due to degenerative changes. Surgery resulted in a slight improvement on all the ranking scales. Surgery at the wrong level occurred in 15% of cases, but no serious complications occurred. The mean thoracolumbar kyphotic angle was 20°, and no correlation was established between this angle and outcome after surgery. No postoperative increase in this angle was reported. There was also no correlation between size of the spinal canal and outcome. Decompressive surgery of the thoracic spinal cord in patients with achondroplasia can be performed safely if anatomical details are taken into consideration. Spondylodesis did not appear essential. Special attention should be given to the method of surgery, identification of the level of interest, and follow-up of the thoracolumbar kyphotic angle.

  19. Long-term Outcome of Multiple Small-diameter Drilling Decompression Combined with Hip Arthroscopy versus Drilling Alone for Early Avascular Necrosis of the Femoral Head.

    Science.gov (United States)

    Li, Ji; Li, Zhong-Li; Zhang, Hao; Su, Xiang-Zheng; Wang, Ke-Tao; Yang, Yi-Meng

    2017-06-20

    Avascular necrosis of femoral head (AVNFH) typically presents in the young adults and progresses quickly without proper treatments. However, the optimum treatments for early stage of AVNFH are still controversial. This study was conducted to evaluate the therapeutic effects of multiple small-diameter drilling decompression combined with hip arthroscopy for early AVNFH compared to drilling alone. This is a nonrandomized retrospective case series study. Between April 2006 and November 2010, 60 patients (98 hips) with early stage AVNFH participated in this study. The patients underwent multiple small-diameter drilling decompression combined with hip arthroscopy in 26 cases/43 hips (Group A) or drilling decompression alone in 34 cases/55 hips (Group B). Patients were followed up at 6, 12, and 24 weeks, and every 6 months thereafter. Radiographs were taken at every follow-up, Harris scores were recorded at the last follow-up, the paired t-test was used to compare the postoperative Harris scores. Surgery effective rate of the two groups was compared using the Chi-square test. All patients were followed up for an average of 57.6 months (range: 17-108 months). Pain relief and improvement of hip function were assessed in all patients at 6 months after the surgery. At the last follow-up, Group A had better outcome with mean Harris' scores improved from 68.23 ± 11.37 to 82.07 ± 2.92 (t = -7.21, P = 0.001) than Group B with mean Harris' scores improved from 69.46 ± 9.71 to 75.79 ± 4.13 (t = -9.47, P = 0.037) (significantly different: t = -2.54, P = 0.017). The total surgery effective rate was also significantly different between Groups A and B (86.0% vs. 74.5%; χ2 = 3.69, P = 0.02). For early stage of AVNFH, multiple small-diameter drilling decompression combined with hip arthroscopy is more effective than drilling decompression alone.

  20. Long-term Outcome of Multiple Small-diameter Drilling Decompression Combined with Hip Arthroscopy versus Drilling Alone for Early Avascular Necrosis of the Femoral Head

    Science.gov (United States)

    Li, Ji; Li, Zhong-Li; Zhang, Hao; Su, Xiang-Zheng; Wang, Ke-Tao; Yang, Yi-Meng

    2017-01-01

    Background: Avascular necrosis of femoral head (AVNFH) typically presents in the young adults and progresses quickly without proper treatments. However, the optimum treatments for early stage of AVNFH are still controversial. This study was conducted to evaluate the therapeutic effects of multiple small-diameter drilling decompression combined with hip arthroscopy for early AVNFH compared to drilling alone. Methods: This is a nonrandomized retrospective case series study. Between April 2006 and November 2010, 60 patients (98 hips) with early stage AVNFH participated in this study. The patients underwent multiple small-diameter drilling decompression combined with hip arthroscopy in 26 cases/43 hips (Group A) or drilling decompression alone in 34 cases/55 hips (Group B). Patients were followed up at 6, 12, and 24 weeks, and every 6 months thereafter. Radiographs were taken at every follow-up, Harris scores were recorded at the last follow-up, the paired t-test was used to compare the postoperative Harris scores. Surgery effective rate of the two groups was compared using the Chi-square test. Results: All patients were followed up for an average of 57.6 months (range: 17–108 months). Pain relief and improvement of hip function were assessed in all patients at 6 months after the surgery. At the last follow-up, Group A had better outcome with mean Harris’ scores improved from 68.23 ± 11.37 to 82.07 ± 2.92 (t = −7.21, P = 0.001) than Group B with mean Harris’ scores improved from 69.46 ± 9.71 to 75.79 ± 4.13 (t = –9.47, P = 0.037) (significantly different: t = –2.54, P = 0.017). The total surgery effective rate was also significantly different between Groups A and B (86.0% vs. 74.5%; χ2 = 3.69, P = 0.02). Conclusion: For early stage of AVNFH, multiple small-diameter drilling decompression combined with hip arthroscopy is more effective than drilling decompression alone. PMID:28584206

  1. The melting and solidification of nanowires

    International Nuclear Information System (INIS)

    Florio, B. J.; Myers, T. G.

    2016-01-01

    A mathematical model is developed to describe the melting of nanowires. The first section of the paper deals with a standard theoretical situation, where the wire melts due to a fixed boundary temperature. This analysis allows us to compare with existing results for the phase change of nanospheres. The equivalent solidification problem is also examined. This shows that solidification is a faster process than melting; this is because the energy transfer occurs primarily through the solid rather than the liquid which is a poorer conductor of heat. This effect competes with the energy required to create new solid surface which acts to slow down the process, but overall conduction dominates. In the second section, we consider a more physically realistic boundary condition, where the phase change occurs due to a heat flux from surrounding material. This removes the singularity in initial melt velocity predicted in previous models of nanoparticle melting. It is shown that even with the highest possible flux the melting time is significantly slower than with a fixed boundary temperature condition.

  2. The melting and solidification of nanowires

    Science.gov (United States)

    Florio, B. J.; Myers, T. G.

    2016-06-01

    A mathematical model is developed to describe the melting of nanowires. The first section of the paper deals with a standard theoretical situation, where the wire melts due to a fixed boundary temperature. This analysis allows us to compare with existing results for the phase change of nanospheres. The equivalent solidification problem is also examined. This shows that solidification is a faster process than melting; this is because the energy transfer occurs primarily through the solid rather than the liquid which is a poorer conductor of heat. This effect competes with the energy required to create new solid surface which acts to slow down the process, but overall conduction dominates. In the second section, we consider a more physically realistic boundary condition, where the phase change occurs due to a heat flux from surrounding material. This removes the singularity in initial melt velocity predicted in previous models of nanoparticle melting. It is shown that even with the highest possible flux the melting time is significantly slower than with a fixed boundary temperature condition.

  3. The melting and solidification of nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Florio, B. J., E-mail: brendan.florio@ul.ie [University of Limerick, Mathematics Applications Consortium for Science and Industry (MACSI), Department of Mathematics and Statistics (Ireland); Myers, T. G., E-mail: tmyers@crm.cat [Centre de Recerca Matemàtica (Spain)

    2016-06-15

    A mathematical model is developed to describe the melting of nanowires. The first section of the paper deals with a standard theoretical situation, where the wire melts due to a fixed boundary temperature. This analysis allows us to compare with existing results for the phase change of nanospheres. The equivalent solidification problem is also examined. This shows that solidification is a faster process than melting; this is because the energy transfer occurs primarily through the solid rather than the liquid which is a poorer conductor of heat. This effect competes with the energy required to create new solid surface which acts to slow down the process, but overall conduction dominates. In the second section, we consider a more physically realistic boundary condition, where the phase change occurs due to a heat flux from surrounding material. This removes the singularity in initial melt velocity predicted in previous models of nanoparticle melting. It is shown that even with the highest possible flux the melting time is significantly slower than with a fixed boundary temperature condition.

  4. Methods for Melting Temperature Calculation

    Science.gov (United States)

    Hong, Qi-Jun

    Melting temperature calculation has important applications in the theoretical study of phase diagrams and computational materials screenings. In this thesis, we present two new methods, i.e., the improved Widom's particle insertion method and the small-cell coexistence method, which we developed in order to capture melting temperatures both accurately and quickly. We propose a scheme that drastically improves the efficiency of Widom's particle insertion method by efficiently sampling cavities while calculating the integrals providing the chemical potentials of a physical system. This idea enables us to calculate chemical potentials of liquids directly from first-principles without the help of any reference system, which is necessary in the commonly used thermodynamic integration method. As an example, we apply our scheme, combined with the density functional formalism, to the calculation of the chemical potential of liquid copper. The calculated chemical potential is further used to locate the melting temperature. The calculated results closely agree with experiments. We propose the small-cell coexistence method based on the statistical analysis of small-size coexistence MD simulations. It eliminates the risk of a metastable superheated solid in the fast-heating method, while also significantly reducing the computer cost relative to the traditional large-scale coexistence method. Using empirical potentials, we validate the method and systematically study the finite-size effect on the calculated melting points. The method converges to the exact result in the limit of a large system size. An accuracy within 100 K in melting temperature is usually achieved when the simulation contains more than 100 atoms. DFT examples of Tantalum, high-pressure Sodium, and ionic material NaCl are shown to demonstrate the accuracy and flexibility of the method in its practical applications. The method serves as a promising approach for large-scale automated material screening in which

  5. Evaluation of an impedance threshold device in patients receiving active compression-decompression cardiopulmonary resuscitation for out of hospital cardiac arrest.

    Science.gov (United States)

    Plaisance, Patrick; Lurie, Keith G; Vicaut, Eric; Martin, Dominique; Gueugniaud, Pierre-Yves; Petit, Jean-Luc; Payen, Didier

    2004-06-01

    The purpose of this multicentre clinical randomized controlled blinded prospective trial was to determine whether an inspiratory impedance threshold device (ITD), when used in combination with active compression-decompression (ACD) cardiopulmonary resuscitation (CPR), would improve survival rates in patients with out-of-hospital cardiac arrest. Patients were randomized to receive either a sham (n = 200) or an active impedance threshold device (n = 200) during advanced cardiac life support performed with active compression-decompression cardiopulmonary resuscitation. The primary endpoint of this study was 24 h survival. The 24 h survival rates were 44/200 (22%) with the sham valve and 64/200 (32%) with the active valve (P = 0.02). The number of patients who had a return of spontaneous circulation (ROSC), intensive care unit (ICU) admission, and hospital discharge rates was 77 (39%), 57 (29%), and 8 (4%) in the sham valve group versus 96 (48%) (P = 0.05), 79 (40%) (P = 0.02), and 10 (5%) (P = 0.6) in the active valve group. Six out of ten survivors in the active valve group and 1/8 survivors in the sham group had normal neurological function at hospital discharge (P = 0.1). The use of an impedance valve in patients receiving active compression-decompression cardiopulmonary resuscitation for out-of-hospital cardiac arrest significantly improved 24 h survival rates.

  6. How low can they go when going with the flow? Tolerance of egg and larval fishes to rapid decompression

    Directory of Open Access Journals (Sweden)

    Craig A. Boys

    2016-06-01

    Full Text Available Egg and larval fish that drift downstream are likely to encounter river infrastructure and consequently rapid decompression, which may result in significant injury. Pressure-related injury (or barotrauma has been shown in juvenile fishes when pressure falls sufficiently below that at which the fish has acclimated. There is a presumption that eggs and larvae may be at least as, if not more, susceptible to barotrauma injury because they are far less-developed and more fragile than juveniles, but studies to date report inconsistent results and none have considered the relationship between pressure change and barotrauma over a sufficiently broad range of pressure changes to enable tolerances to be properly determined. To address this, we exposed eggs and larvae of three physoclistic species to rapid decompression in a barometric chamber over a broad range of discrete pressure changes. Eggs, but not larvae, were unaffected by all levels of decompression tested. At exposure pressures below ∼40 kPa, or ∼40% of surface pressure, swim bladder deflation occurred in all species and internal haemorrhage was observed in one species. None of these injuries killed the fish within 24 h, but subsequent mortality cannot be excluded. Consequently, if larval drift is expected where river infrastructure is present, adopting design or operational features which maintain exposure pressures at 40% or more of the pressure to which drifting larvae are acclimated may afford greater protection for resident fishes.

  7. Recent Changes in the Arctic Melt Season

    Science.gov (United States)

    Stroeve, Julienne; Markus, Thorsten; Meier, Walter N.; Miller, Jeff

    2007-01-01

    Melt-season duration, melt-onset and freeze-up dates are derived from satellite passive microwave data and analyzed from 1979 to 2005 over Arctic sea ice. Results indicate a shift towards a longer melt season, particularly north of Alaska and Siberia, corresponding to large retreats of sea ice observed in these regions. Although there is large interannual and regional variability in the length of the melt season, the Arctic is experiencing an overall lengthening of the melt season at a rate of about 2 weeks decade(sup -1). In fact, all regions in the Arctic (except for the central Arctic) have statistically significant (at the 99% level or higher) longer melt seasons by greater than 1 week decade(sup -1). The central Arctic shows a statistically significant trend (at the 98% level) of 5.4 days decade(sup -1). In 2005 the Arctic experienced its longest melt season, corresponding with the least amount of sea ice since 1979 and the warmest temperatures since the 1880s. Overall, the length of the melt season is inversely correlated with the lack of sea ice seen in September north of Alaska and Siberia, with a mean correlation of -0.8.

  8. Remote multiple intracranial hemorrhage in multiple metastatic lung adenocarcinoma following decompression of posterior fossa lesion: Unknown cause

    Directory of Open Access Journals (Sweden)

    Subhas Konar

    2015-01-01

    Full Text Available Cerebral metastasis can present with hemorrhage. However, multiple hemorrhages in metastatic lesions following surgical decompression of a single lesion are never reported. We report a case of cerebral metastasis from lung cancer that developed multiple hemorrhages in supratentorial metastatic lesions following surgical resection of an infratentorial lesion.

  9. On melting of boron phosphide under pressure

    OpenAIRE

    Solozhenko, Vladimir; Mukhanov, V. A.

    2015-01-01

    Melting of cubic boron phosphide, BP, has been studied at pressures to 9 GPa using synchrotron X-ray diffraction and electrical resistivity measurements. It has been found that above 2.6 GPa BP melts congruently, and the melting curve exhibits negative slope (–60 ± 7 K/GPa), which is indicative of a higher density of the melt as compared to the solid phase.

  10. Melting Can Hinder Impact-Induced Adhesion

    Science.gov (United States)

    Hassani-Gangaraj, Mostafa; Veysset, David; Nelson, Keith A.; Schuh, Christopher A.

    2017-10-01

    Melting has long been used to join metallic materials, from welding to selective laser melting in additive manufacturing. In the same school of thought, localized melting has been generally perceived as an advantage, if not the main mechanism, for the adhesion of metallic microparticles to substrates during a supersonic impact. Here, we conduct the first in situ supersonic impact observations of individual metallic microparticles aimed at the explicit study of melting effects. Counterintuitively, we find that under at least some conditions melting is disadvantageous and hinders impact-induced adhesion. In the parameter space explored, i.e., ˜10 μ m particle size and ˜1 km /s particle velocity, we argue that the solidification time is much longer than the residence time of the particle on the substrate, so that resolidification cannot be a significant factor in adhesion.

  11. Property Investigation of Laser Cladded, Laser Melted and Electron Beam Melted Ti-Al6-V4

    Science.gov (United States)

    2006-05-01

    UNCLASSIFIED/UNLIMITED UNCLASSIFIED/UNLIMITED Figure 3: Examples of electron beam melted net shape parts; powder bed [3]. 1.4 Laser Cladding ...description, www.arcam.com. [4] K.-H. Hermann, S. Orban, S. Nowotny, Laser Cladding of Titanium Alloy Ti6242 to Restore Damaged Blades, Proceedings...Property Investigation of Laser Cladded , Laser Melted and Electron Beam Melted Ti-Al6-V4 Johannes Vlcek EADS Deutschland GmbH Corporate Research

  12. An abrupt outgassing revealed by a slow decompression experiment of cristal-bearing syrup foam

    Science.gov (United States)

    Kanno, Y.; Namiki, A.

    2013-12-01

    Distribution of volcanic gasses in a conduit determines eruption style. Outgassing changes the distribution of volcanic gasses in a conduit.We here simulated the outgassing from ascending magma by slow decompression experiments. As molten magma ascends in a conduit, surrounding pressure becomes low and bubbles in magma expand. In our previous work, we found that the bubble expansion causes film rupturing and makes paths for outgassing. The crystals in magma may affect this newly found outgassing style. Accordingly, we slowly decompressed syrup foam including solid particles as a magma analogue. Experiments are conducted in an acrylic tank. We observed the expansion of three-phase magma analog from the front of the tank using a digital video camera. From the images and pressure measurements, we calculated time evolution of the syrup volume and permeability. We consider that there is no bubble segregation by the ascent of individual bubbles from the Stoke's velocity. We conducted our experiments with a viscosity range of 10-20 Pa s which is the same orders of magnitude of that of basaltic magma, 10-103 Pa s. At the beginning of the decompression, the volume change of the syrup foam is well explained by isothermal expansion. When the gas fractions reached to the 85-90%, we observed that deformations of bubble films caused film rupturing so that bubbles coalesce vertically to clear a path. As time elapsed, the measured gas volume in the foam becomes smaller than that estimated by the isothermal expansion, indicating the occurrence of outgassing. In the experiments with high volume fraction of solid particles (>30 vol.% for bubble-free liquid), we observed another new style of outgassing. Several large voids (> 10 mm in radius) appear at a middle height of the foam and connect each other to make a horizontally elongated cavity. The roof of the cavity collapses, and then massive outgassing occurs. At the beginning of the decompression until the foam collapses, outgassing

  13. Early biliary decompression versus conservative treatment in acute biliary pancreatitis (APEC trial): study protocol for a randomized controlled trial

    NARCIS (Netherlands)

    Schepers, N.J.; Bakker, O.J.; Besselink, M.G.; Bollen, T.L.; Dijkgraaf, M.G.; Eijck, C.H. van; Fockens, P.; Geenen, E.J. van; Grinsven, J. van; Hallensleben, N.D.; Hansen, B.E.; Santvoort, H.C. van; Timmer, R.; Anten, M.P.; Bolwerk, C.J.; Delft, F. von; Dullemen, H.M. van; Erkelens, G.W.; Hooft, J.E. van; Laheij, R.; Hulst, R.W. van der; Jansen, J.M.; Kubben, F.J.; Kuiken, S.D.; Perk, L.E.; Ridder, R.J. de; Rijk, M.C. de; Romkens, T.E.; Schoon, E.J.; Schwartz, M.P.; Spanier, B.W.; Tan, A.C.; Thijs, W.J.; Venneman, N.G.; Vleggaar, F.P.; Vrie, W. van de; Witteman, B.J.; Gooszen, H.G.; Bruno, M.J.

    2016-01-01

    BACKGROUND: Acute pancreatitis is mostly caused by gallstones or sludge. Early decompression of the biliary tree by endoscopic retrograde cholangiography (ERC) with sphincterotomy may improve outcome in these patients. Whereas current guidelines recommend early ERC in patients with concomitant

  14. Early biliary decompression versus conservative treatment in acute biliary pancreatitis (APEC trial): Study protocol for a randomized controlled trial

    NARCIS (Netherlands)

    N.J. Schepers (Nicolien); O.J. Bakker (Olaf ); M.G. Besselink (Marc); T.L. Bollen (Thomas); M.G.W. Dijkgraaf (Marcel); C.H.J. van Eijck (Casper); P. Fockens (Paul); E-J.M. Geenen (Erwin-Jan); J. van Grinsven (Janneke); N.D.L. Hallensleben (Nora D.L.); B.E. Hansen (Bettina); H.C. van Santvoort (Hjalmar); R. Timmer (Robin); M.-P.G.F. Anten (Marie-Paule G.F.); C.L. Bolwerk (Clemens); F. van Delft (Foke); H.M. van Dullemen (Hendrik); G.W. Erkelens (G.Willemien); J.E. van Hooft (Jeanin); C. Laheij (Claudia); R.W.M. van der Hulst (René); J.M. Jansen (Jeroen); F.J. Kubben; S.D. Kuiken (Sjoerd D.); L.E. Perk (Lars E.); R. de Ridder (Rogier); M.C.M. Rijk; T.E.H. Römkens; E.J. Schoon (Erik); M.P. Schwartz (Matthijs P.); B.W.M. Spanier (Marcel); A.C. Tan (Adriaan); W.J. Thijs; N.G. Venneman (Niels); F.P. Vleggaar (Frank); W. van de Vrie (Wim); B.J.M. Witteman (Ben); H.G. Gooszen (Hein); M.J. Bruno (Marco)

    2016-01-01

    textabstractBackground: Acute pancreatitis is mostly caused by gallstones or sludge. Early decompression of the biliary tree by endoscopic retrograde cholangiography (ERC) with sphincterotomy may improve outcome in these patients. Whereas current guidelines recommend early ERC in patients with

  15. Early biliary decompression versus conservative treatment in acute biliary pancreatitis (APEC trial) : Study protocol for a randomized controlled trial

    NARCIS (Netherlands)

    Schepers, Nicolien J.; Bakker, Olaf J.; Besselink, Marc G H; Bollen, Thomas L.; Dijkgraaf, Marcel G W; van Eijck, Casper H J; Fockens, Paul; van Geenen, Erwin J M; van Grinsven, Janneke; Hallensleben, Nora D L; Hansen, Bettina E.; van Santvoort, Hjalmar C.; Timmer, Robin; Anten, Marie Paule G F; Bolwerk, Clemens J M; van Delft, Foke; van Dullemen, Hendrik M.; Erkelens, G. Willemien; van Hooft, Jeanin E.; Laheij, Robert; van der Hulst, René W M; Jansen, Jeroen M.; Kubben, Frank J G M; Kuiken, Sjoerd D.; Perk, Lars E.; de Ridder, Rogier J J; Rijk, Marno C M; Römkens, Tessa E H; Schoon, Erik J.; Schwartz, Matthijs P.; Spanier, B. W Marcel; Tan, Adriaan C I T L; Thijs, Willem J.; Venneman, Niels G.; Vleggaar, Frank P.; van de Vrie, Wim; Witteman, Ben J.; Gooszen, Hein G.; Bruno, Marco J.

    2016-01-01

    Background: Acute pancreatitis is mostly caused by gallstones or sludge. Early decompression of the biliary tree by endoscopic retrograde cholangiography (ERC) with sphincterotomy may improve outcome in these patients. Whereas current guidelines recommend early ERC in patients with concomitant

  16. U-Pb SHRIMP data and geochemical characterization of granitoids intruded along the Coxixola shear zone, Provincia Borborema, NE Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Ignez de Pinho; Silva Filho, Adejardo Francisco da; Silva, Francis M.J.V. da, E-mail: ignez@ufpe.br [Universidade Federal de Pernanmbuco (UFPE), Recife, PE (Brazil). Dept. de Geologia; Armstrong, Richard [Australian National University (Australia)

    2011-07-01

    A large volume of granitic magmatism associated with large scale shear zone and metamorphism under high-T amphibolite facies conditions characterize the Brasiliano Orogeny in the Borborema Province, NE Brazil. Granitoids from two plutons and later dykes intruded along the Coxixola shear zone show distinct crystallization ages and geochemical signature. The oldest granitoids (618 ± 5 Ma), Serra de Inacio Pereira Pluton are coeval with the peak of regional metamorphism and they were probably originated by melting of a paleoproterozoic source. The granitoids from the Serra do Marinho Pluton show crystallization age of 563 ± 4 Ma and geochemical signature of post-collisional A-type granites. The later dykes have crystallization age of 526 ± 7 Ma, geochemical signature of A-type granitoids. (author)

  17. Feedback control of thermal instability by compression and decompression

    International Nuclear Information System (INIS)

    Okamoto, M.; Hirano, K.; Amano, T.; Ohnishi, M.

    1983-01-01

    Active feedback control of the fusion output power by means of plasma compression-decompression is considered with the purpose of achieving steady-state plasma ignition in a tokamak. A simple but realistic feedback control system is modelled and zero-dimensional energy balance equations are solved numerically by taking into account the errors in the measurements, a procedure that is necessary for the feedback control. It is shown that the control can stabilize the thermal runaway completely and maintain steady-state operation without any significant change in major radius or thermal output power. Linear stability is analysed for a general type of scaling law, and the dependence of the stability conditions on the scaling law is studied. The possibility of load-following operation is considered. Finally, a one-dimensional analysis is applied to the large-aspect-ratio case. (author)

  18. Cognition after malignant media infarction and decompressive hemicraniectomy - a retrospective observational study

    Directory of Open Access Journals (Sweden)

    Neubieser Katja

    2011-06-01

    Full Text Available Abstract Background Decompressive hemicraniectomy is a life-saving procedure for patients with malignant middle cerebral artery infarctions. However, the neuropsychological sequelae in such patients have up to now received little attention. In this study we not only describe neuropsychological deficits but also the quality of life and the extent of depression and other psychiatric symptoms in patients after complete media infarction of the non-speech dominant hemisphere. Methods 20 patients from two different university hospitals (mean ± standard deviation: 52 ± 14 years of age who had undergone hemicraniectomy with duraplasty above the non-speech dominant hemisphere at least one year previously were examined using a thorough neurological and neuropsychological work-up. The quality of life and the extent of psychiatric problems were determined on the basis of self-estimation questionnaires. The patients were asked whether they would again opt for the surgical treatment when considering their own outcome. 20 healthy persons matched for age, gender and education served as a control group. Results All patients but one were neurologically handicapped, half of them severely. Age was significantly correlated with poorer values on the Rankin scale and Barthel index. All cognitive domain z values were significantly lower than in the control group. Upon re-examination, 18 of 20 patients were found to be cognitively impaired to a degree that fulfilled the formal DSM IV criteria for dementia. Conclusions Patients with non-speech dominant hemispheric infarctions and decompressive hemicraniectomy are at high risk of depression and severe cognitive impairment.

  19. Iso-risk air no decompression limits after scoring marginal decompression sickness cases as non-events.

    Science.gov (United States)

    Murphy, F Gregory; Swingler, Ashleigh J; Gerth, Wayne A; Howle, Laurens E

    2018-01-01

    Decompression sickness (DCS) in humans is associated with reductions in ambient pressure that occur during diving, aviation, or certain manned spaceflight operations. Its signs and symptoms can include, but are not limited to, joint pain, radiating abdominal pain, paresthesia, dyspnea, general malaise, cognitive dysfunction, cardiopulmonary dysfunction, and death. Probabilistic models of DCS allow the probability of DCS incidence and time of occurrence during or after a given hyperbaric or hypobaric exposure to be predicted based on how the gas contents or gas bubble volumes vary in hypothetical tissue compartments during the exposure. These models are calibrated using data containing the pressure and respired gas histories of actual exposures, some of which resulted in DCS, some of which did not, and others in which the diagnosis of DCS was not clear. The latter are referred to as marginal DCS cases. In earlier works, a marginal DCS event was typically weighted as 0.1, with a full DCS event being weighted as 1.0, and a non-event being weighted as 0.0. Recent work has shown that marginal DCS events should be weighted as 0.0 when calibrating gas content models. We confirm this indication in the present work by showing that such models have improved performance when calibrated to data with marginal DCS events coded as non-events. Further, we investigate the ramifications of derating marginal events on model-prescribed air diving no-stop limits. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Use of impedance threshold device in conjunction with our novel adhesive glove device for ACD-CPR does not result in additional chest decompression.

    Science.gov (United States)

    Shih, Andre; Udassi, Sharda; Porvasnik, Stacy L; Lamb, Melissa A; Badugu, Srinivasarao; Venkata, Giridhar Kaliki; Lopez-Colon, Dalia; Haque, Ikram U; Zaritsky, Arno L; Udassi, Jai P

    2013-10-01

    To evaluate the hemodynamic effects of using an adhesive glove device (AGD) to perform active compression-decompression CPR (AGD-CPR) in conjunction with an impedance threshold device (ITD) in a pediatric cardiac arrest model. Controlled, randomized animal study. In this study, 18 piglets were anesthetized, ventilated, and continuously monitored. After 3min of untreated ventricular fibrillation, animals were randomized (6/group) to receive either standard CPR (S-CPR), active compression-decompression CPR via adhesive glove device (AGD-CPR) or AGD-CPR along with an ITD (AGD-CPR+ITD) for 2min at 100-120compressions/min. AGD is delivered using a fingerless leather glove with a Velcro patch on the palmer aspect and the counter Velcro patch adhered to the pig's chest. Data (mean±SD) were analyzed using one-way ANOVA with pair wise multiple comparisons to assess differences between groups. p-Value≤0.05 was considered significant. Both AGD-CPR and AGD-CPR+ITD groups produced lower intrathoracic pressure (IttP, mmHg) during decompression phase (-13.4±6.7, p=0.01 and -11.9±6.5, p=0.01, respectively) in comparison to S-CPR (-0.3±4.2). Carotid blood flow (CBF, % of baseline mL/min) was higher in AGD-CPR and AGD-CPR+ITD (respectively 64.3±47.3%, p=0.03 and 67.5±33.1%, p=0.04) as compared with S-CPR (29.1±12.5%). Coronary perfusion pressure (CPP, mmHg) was higher in AGD-CPR and AGD-CPR+ITD (respectively 19.7±4.6, p=0.04 and 25.6±12.1, p=0.02) when compared to S-CPR (9.6±9.1). There was no statistically significant difference between AGD-CPR and AGD-CPR+ITD groups with reference to intra-thoracic pressure, carotid blood flow and coronary perfusion pressure. Active compression decompression delivered by this simple and inexpensive adhesive glove device resulted in improved cerebral blood flow and coronary perfusion pressure. There was no statistically significant added effect of ITD use along with AGD-CPR on the decompression of the chest. Copyright © 2013 Elsevier

  1. Plasma arc melting of titanium-tantalum alloys

    International Nuclear Information System (INIS)

    Dunn, P.; Patterson, R.A.; Haun, R.

    1994-01-01

    Los Alamos has several applications for high temperature, oxidation and liquid-metal corrosion resistant materials. Further, materials property constraints are dictated by a requirement to maintain low density; e.g., less than the density of stainless steel. Liquid metal compatibility and density requirements have driven the research toward the Ti-Ta system with an upper bound of 60 wt% Ta-40 wt% Ti. Initial melting of these materials was performed in a small button arc melter with several hundred grams of material; however, ingot quantities were soon needed. But, refractory metal alloys whose constituents possess very dissimilar densities, melting temperatures and vapor pressures pose significant difficulty and require specialized melting practices. The Ti-Ta alloys fall into this category with the density of tantalum 16.5 g/cc and that of titanium 4.5 g/cc. Melting is further complicated by the high melting point of Ta(3020 C) and the relatively low boiling point of Ti(3287 C). Previous electron beam melting experience with these materials resulted, in extensive vaporization of the titanium and poor chemical homogeneity. Vacuum arc remelting(VAR) was considered as a melting candidate and discarded due to density and vapor pressure issues associated with electron beam. Plasma arc melting offered the ability to supply a cover gas to deal with vapor pressure issues as well as solidification control to help with macrosegregation in the melt and has successfully produced high quality ingots of the Ti-Ta alloys

  2. On melting criteria for complex plasma

    International Nuclear Information System (INIS)

    Klumov, Boris A

    2011-01-01

    The present paper considers melting criteria for a plasma crystal discovered in dust plasma in 1994. Separate discussions are devoted to three-dimensional (3D) and two-dimensional (2D) systems. In the 3D case, melting criteria are derived based on the properties of local order in a system of microparticles. The order parameters are constructed from the cumulative distributions of the microparticle probability distributions as functions of various rotational invariants. The melting criteria proposed are constructed using static information on microparticle positions: a few snapshots of the system that allow for the determination of particle coordinates are enough to determine the phase state of the system. It is shown that criteria obtained in this way describe well the melting and premelting of 3D complex plasmas. In 2D systems, a system of microparticles interacting via a screened Coulomb (i.e., Debye-Hueckel or Yukawa) potential is considered as an example, using molecular dynamics simulations. A number of new order parameters characterizing the melting of 2D complex plasmas are proposed. The order parameters and melting criteria proposed for 2D and 3D complex plasmas can be applied to other systems as well. (methodological notes)

  3. Geology of the Curimatau medium region (Paraiba State, Brazil) and the emplacement of the Dona Ines granite associated to the Brasiliano transcurrent shear zones; Geologia da Regiao do Medio Curimatau (PB) e o alojamento do granito de Dona Ines associado a zonas de cisalhamento transcorrentes brasilianas

    Energy Technology Data Exchange (ETDEWEB)

    Borges, Sergio Vieira Freire

    1996-12-31

    In an area of about 700 Km{sup 2} located in the northeast of Paraiba State and having as main point the town of Dona Ines, a geologic/structural mapping, a gravimetric survey and radiometric dating using the Rb/Sr method in whole rock and Sm.Nd model ages were undertaken in order to study and to understand the geology of this portion of terrain, the emplacement of the Dona Ines granitoids and its relationship with the enclosing rocks and the deformation acting at the time of the intrusion. The age of the pluton of Dona Ines was determined by the Rb/Sr whole rock method as 560 {+-} 20 Ma (end of Brasiliano Cycle in the region). Sm.Nd model ages in granitoids of Araras, Belem and Dona Ines have revealed paleoproterozoic ages for their crustal sources, as indicated by the negative {epsilon}{sub nd} of this rock 128 refs., 95 figs., 6 tabs., 7 maps

  4. Geology of the Curimatau medium region (Paraiba State, Brazil) and the emplacement of the Dona Ines granite associated to the Brasiliano transcurrent shear zones; Geologia da Regiao do Medio Curimatau (PB) e o alojamento do granito de Dona Ines associado a zonas de cisalhamento transcorrentes brasilianas

    Energy Technology Data Exchange (ETDEWEB)

    Borges, Sergio Vieira Freire

    1997-12-31

    In an area of about 700 Km{sup 2} located in the northeast of Paraiba State and having as main point the town of Dona Ines, a geologic/structural mapping, a gravimetric survey and radiometric dating using the Rb/Sr method in whole rock and Sm.Nd model ages were undertaken in order to study and to understand the geology of this portion of terrain, the emplacement of the Dona Ines granitoids and its relationship with the enclosing rocks and the deformation acting at the time of the intrusion. The age of the pluton of Dona Ines was determined by the Rb/Sr whole rock method as 560 {+-} 20 Ma (end of Brasiliano Cycle in the region). Sm.Nd model ages in granitoids of Araras, Belem and Dona Ines have revealed paleoproterozoic ages for their crustal sources, as indicated by the negative {epsilon}{sub nd} of this rock 128 refs., 95 figs., 6 tabs., 7 maps

  5. Single-stage transforaminal decompression, debridement, interbody fusion, and posterior instrumentation for lumbosacral brucellosis.

    Science.gov (United States)

    Abulizi, Yakefu; Liang, Wei-Dong; Muheremu, Aikeremujiang; Maimaiti, Maierdan; Sheng, Wei-Bin

    2017-07-14

    Spinal brucellosis is a less commonly reported infectious spinal pathology. There are few reports regarding the surgical treatment of spinal brucellosis in existing literature. This retrospective study was conducted to determine the effectiveness of single-stage transforaminal decompression, debridement, interbody fusion, and posterior instrumentation for lumbosacral spinal brucellosis. From February 2012 to April 2015, 32 consecutive patients (19 males and 13 females, mean age 53.7 ± 8.7) with lumbosacral brucellosis treated by transforaminal decompression, debridement, interbody fusion, and posterior instrumentation were enrolled. Medical records, imaging studies, laboratory data were collected and summarized. Surgical outcomes were evaluated based on visual analogue scale (VAS), Oswestry Disability Index (ODI) and Japanese Orthopaedic Association (JOA) scale. The changes in C-reactive protein (CRP) levels, erythrocyte sedimentation rate (ESR), clinical symptoms and complications were investigated. Graft fusion was evaluated using Bridwell grading criteria. The mean follow-up period was 24.9 ± 8.2 months. Back pain and radiating leg pain was relieved significantly in all patients after operation. No implant failures were observed in any patients. Wound infection was observed in two patients and sinus formation was observed in one patient. Solid bony fusion was achieved in 30 patients and the fusion rate was 93.8%. The levels of ESR and CRP were returned to normal by the end of three months' follow-up. VAS and ODI scores were significantly improved (P brucellosis.

  6. Corium melt researches at VESTA test facility

    Directory of Open Access Journals (Sweden)

    Hwan Yeol Kim

    2017-10-01

    Full Text Available VESTA (Verification of Ex-vessel corium STAbilization and VESTA-S (-small test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging ZrO2 melt jet on a sacrificial material were performed to investigate the ablation characteristics. ZrO2 melt in an amount of 65–70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40, and the other is a stainless steel (SUS304 melt. Metallic melt in an amount of 1.5–2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. ZrO2 melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is UO2 60%, Zr 10%, ZrO2 15%, SUS304 14%, and B4C 1%, was melted in a

  7. Mantle ingredients for making the fingerprint of Etna alkaline magmas: implications for shallow partial melting within the complex geodynamic framework of Eastern Sicily

    Science.gov (United States)

    Viccaro, Marco; Zuccarello, Francesco

    2017-09-01

    able to produce magmas with variable compositions and volatile contents, which can then undergo distinct histories of ascent and evolution, leading to the wide range of eruptive styles observed at Mt. Etna volcano. Being partial melting confined in the spinel facies of the mantle, our model implies that the source of Mt. Etna magmas might be rather shallow (<2 GPa; i.e., lesser than ca. 60 km), excluding the presence of deep, plume-like mantle structures responsible for magma generation. Partial melting should occur consequently as a response of mantle decompression within the framework of regional tectonics affecting the Eastern Sicily, which could be triggered by extensional tectonics and/or subduction-induced mantle upwelling.

  8. A Feasibility Study on UO2/ZrO2 Mixture Melting using Induction Skull Melting Method

    International Nuclear Information System (INIS)

    Hong, S. W.; Kim, J. H.; Kim, H. D.

    1998-01-01

    Using ISM(Induction Skull Melting) method, which is usually used for the crystallization of refractory materials, a feasibility study on melting of the UO 2 /ZrO 2 mixture(w/o 8:2) is carried out. Frequency, one of main design parameters for ISM, is determined from electrical resistance of UO 2 /ZrO 2 mixture. Heat loss from the crucible for UO 2 /ZrO 2 20kg melting is predicted by comparison with the existing experimental data for UO , ZrO 2 , and ThO 2 . The analysis shows that melting and superheating of the UO 2 /ZrO 2 mixture using induction skull melting method is possible. To attain the superheat of 300K for 20 kg of UO 2 /ZrO 2 , 100kHz, 100 kW power input for induction coil, and 570L/min coolant flow rate are found to be required. The results of this feasibility study will be adopted for designing UO 2 /ZrO 2 furnace using actual corium material at KAERI

  9. Features of melting of indium monohalides

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriev, V S; Smirniv, V A [AN SSSR, Chernogolovka. Inst. Fiziki Tverdogo Tela

    1980-12-01

    The character of InCl, InBr and InI melting is investigated by the methods of DTA, calorimetry, conductometry and chemical analysis. Partial decomposition of monohalogenides during melting according to the reactions of disproportionation is shown. The presence of disproportionation products (In/sup 0/ and In/sup 3 +/) is manifested in the properties of solid monohalogenides, prepared by the crystallization from melt, in their photosensitivity and electroconductivity.

  10. The coupled response to slope-dependent basal melting

    Science.gov (United States)

    Little, C. M.; Goldberg, D. N.; Sergienko, O. V.; Gnanadesikan, A.

    2009-12-01

    Ice shelf basal melting is likely to be strongly controlled by basal slope. If ice shelves steepen in response to intensified melting, it suggests instability in the coupled ice-ocean system. The dynamic response of ice shelves governs what stable morphologies are possible, and thus the influence of melting on buttressing and grounding line migration. Simulations performed using a 3-D ocean model indicate that a simple form of slope-dependent melting is robust under more complex oceanographic conditions. Here we utilize this parameterization to investigate the shape and grounding line evolution of ice shelves, using a shallow-shelf approximation-based model that includes lateral drag. The distribution of melting substantially affects the shape and aspect ratio of unbuttressed ice shelves. Slope-dependent melting thins the ice shelf near the grounding line, reducing velocities throughout the shelf. Sharp ice thickness gradients evolve at high melting rates, yet grounding lines remain static. In foredeepened, buttressed ice shelves, changes in grounding line flux allow two additional options: stable or unstable retreat. Under some conditions, slope-dependent melting results in stable configurations even at high melt rates.

  11. Network topology of olivine-basalt partial melts

    Science.gov (United States)

    Skemer, Philip; Chaney, Molly M.; Emmerich, Adrienne L.; Miller, Kevin J.; Zhu, Wen-lu

    2017-07-01

    The microstructural relationship between melt and solid grains in partially molten rocks influences many physical properties, including permeability, rheology, electrical conductivity and seismic wave speeds. In this study, the connectivity of melt networks in the olivine-basalt system is explored using a systematic survey of 3-D X-ray microtomographic data. Experimentally synthesized samples with 2 and 5 vol.% melt are analysed as a series of melt tubules intersecting at nodes. Each node is characterized by a coordination number (CN), which is the number of melt tubules that intersect at that location. Statistically representative volumes are described by coordination number distributions (CND). Polyhedral grains can be packed in many configurations yielding different CNDs, however widely accepted theory predicts that systems with small dihedral angles, such as olivine-basalt, should exhibit a predominant CN of four. In this study, melt objects are identified with CN = 2-8, however more than 50 per cent are CN = 4, providing experimental verification of this theoretical prediction. A conceptual model that considers the role of heterogeneity in local grain size and melt fraction is proposed to explain the formation of nodes with CN ≠ 4. Correctly identifying the melt network topology is essential to understanding the relationship between permeability and porosity, and hence the transport properties of partial molten mantle rocks.

  12. Magnetic resonance imaging criteria of successful core decompression in avascular necrosis of the hip

    Energy Technology Data Exchange (ETDEWEB)

    Radke, S.; Kirschner, S.; Seipel, V.; Rader, C.; Eulert, J. [Department of Orthopaedic Surgery, Koenig-Ludwig-Haus, Julius-Maximilians University, Wuerzburg, Brettreichstr.11, 97074, Wuerzburg (Germany)

    2004-09-01

    To identify imaging criteria that determine the outcome of core decompression (CD) in femoral-head avascular necrosis (AVN). Radiographs and magnetic resonance imaging (MRI) of 65 hips with early stage AVN treated by core decompression between January 1990 and December 2000 for AVN were reviewed. All hips were categorized into two groups according to the result of CD using total hip arthroplasty (THA) as an end point. Hips that had no THA at follow-up were allocated to group I; those treated with a THA were allocated to group II. CD results were calculated for each group using THA as an end point. The parameters analyzed were the presence or absence of edema associated with the double-line sign on the preoperative MRI, the type of epiphyseal scar (ES) according to Jing, and the type of necrosis according to Mitchell. On follow-up, 45 hips had no THA (group I); 20 patients had a THA (group II). Patients with a radiographic crescent sign and those with edema associated with the double-line sign progressed to THA significantly more frequently. The extent of the necrosis had less discriminatory effect between the two groups. ES and necrotic tissue types had no prognostic value. In regard to the success of CD, it is important to differentiate on MRI between a double line sign plus bone marrow edema and a double-line sign only. (orig.)

  13. Magnetic resonance imaging criteria of successful core decompression in avascular necrosis of the hip

    International Nuclear Information System (INIS)

    Radke, S.; Kirschner, S.; Seipel, V.; Rader, C.; Eulert, J.

    2004-01-01

    To identify imaging criteria that determine the outcome of core decompression (CD) in femoral-head avascular necrosis (AVN). Radiographs and magnetic resonance imaging (MRI) of 65 hips with early stage AVN treated by core decompression between January 1990 and December 2000 for AVN were reviewed. All hips were categorized into two groups according to the result of CD using total hip arthroplasty (THA) as an end point. Hips that had no THA at follow-up were allocated to group I; those treated with a THA were allocated to group II. CD results were calculated for each group using THA as an end point. The parameters analyzed were the presence or absence of edema associated with the double-line sign on the preoperative MRI, the type of epiphyseal scar (ES) according to Jing, and the type of necrosis according to Mitchell. On follow-up, 45 hips had no THA (group I); 20 patients had a THA (group II). Patients with a radiographic crescent sign and those with edema associated with the double-line sign progressed to THA significantly more frequently. The extent of the necrosis had less discriminatory effect between the two groups. ES and necrotic tissue types had no prognostic value. In regard to the success of CD, it is important to differentiate on MRI between a double line sign plus bone marrow edema and a double-line sign only. (orig.)

  14. Melt Fragmentation Characteristics of Metal Fuel with Melt Injection Mass during Initiating Phase of SFR Severe Accidents

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Hyo; Lee, Min Ho; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of); Jerng, Dong Wook [Chung-Ang Univ., Seoul (Korea, Republic of)

    2016-05-15

    The PGSFR has adopted the metal fuel for its inherent safety under severe accident conditions. However, this fuel type is not demonstrated clearly yet under the such severe accident conditions. Additional experiments for examining these issues should be performed to support its licensing activities. Under initiating phase of hypothetic core disruptive accident (HCDA) conditions, the molten metal could be better dispersed and fragmented into the coolant channel than in the case of using oxide fuel. This safety strategy provides negative reactivity driven by a good dispersion of melt. If the coolant channel does not sufficient coolability, the severe recriticality would occur within the core region. Thus, it is important to examine the extent of melt fragmentation. The fragmentation behaviors of melt are closely related to a formation of debris shape. Once the debris shape is formed through the fragmentation process, its coolability is determined by the porosity or thermal conductivity of the melt. There were very limited studies for transient irradiation experiments of the metal fuel. These studies were performed by Transient Reactor Test Facility (TREAT) M series tests in U.S. The TREAT M series tests provided basic information of metal fuel performance under transient conditions. The effect of melt injection mass was evaluated in terms of the fragmentation behaviors of melt. These behaviors seemed to be similar between single-pin and multi-pins failure condition. However, the more melt was agglomerated in case of multi-pins failure.

  15. Electron beam melting of bearing materials

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmied, G.; Schuler, A. (Technische Univ., Vienna (Austria). Inst. fuer Allgemeine Elektrotechnik); Elsinger, G.; Koroschetz, F. (MIBA Gleitlager AG, Laakirchen (Austria)); Tschegg, E.K. (Technische Univ., Vienna (Austria). Inst. fuer Angewandte und Technische Physik)

    1990-06-01

    This paper reports on a surface treatment method for the bearing materials AlSn6 which permits the use of this material without the overlay usually required. Microstructural refinement is achieved by means of a surface melting technique using an electron beam with successive rapid solidification. Extremely fine tin precipitates are formed in the melted surface layer which lead to significantly better tribological properties of the bearing material. Tests compared the tribological properties for AlSn6 bearings treated by the surface melting technique with those of untreated bearings. Whereas all untreated bearings failed by seizure after only 2 h of testing, 30% of the tested bearings which had been surface melted survived the entire testing program without damage.

  16. Evolving magma storage conditions beneath Mount St. Helens inferred from chemical variations in melt inclusions from the 1980-1986 and current (2004-2006) eruptions: Chapter 33 in A volcano rekindled: the renewed eruption of Mount St. Helens, 2004-2006

    Science.gov (United States)

    Blundy, Jon; Cashman, Katharine V.; Berlo, Kim; Sherrod, David R.; Scott, William E.; Stauffer, Peter H.

    2008-01-01

    Major element, trace element, and volatile concentrations in 187 glassy melt inclusions and 25 groundmass glasses from the 1980-86 eruption of Mount St. Helens are presented, together with 103 analyses of touching FE-Ti oxide pairs from the same samples. These data are used to evaluate the temporal evolution of the magmatic plumbing system beneath the volcano during 1980-86 and so provide a framework in which to interpret analyses of melt inclusions from the current (2004-2006) eruption. Major and trace element concentrations of all melt inclusions lie at the high SiO2 end of the data array defined by eruptive products of the late Quaternary age from Mount St. Helens. For several major and trace elements, the glasses define a trend that is oblique to the whole-rock trend, indicating that different mineral assemblages were responsible for the two trends. The whole-rock trend can be ascribed to differentiation of hydrous basaltic parents in a deep-seated magma reservoir, probably at depths great enough to stabilize garnet. In contrast, the glass trends were generated by closed-system crystallization of the phenocryst and microlite mineral assemblages at low pressures. The dissolved H2O content of the melt inclusions from 1980-86, as measured by the ion microprobe, ranges from 0 to 6.7 wt. percent, with the highest values obtained from the plinian phase of May 18, 1980. Water contents decrease with increasing SiO2, consistent with decompression-driven crystallization. Preliminary data for dissolved CO2 in melt inclusions from the May 18 plinian phase from August 7, 1980, indicate that XH2O in a vapor phase was approximately constant at 0.80, irrespective of H2O content, suggestive of closed-system degassing with a high bubble fraction or gas streaming through the subvolcanic system. Temperature and f

  17. Posterior fossa decompression with duraplasty in Chiari surgery: A technical note

    Directory of Open Access Journals (Sweden)

    Marcelo Ferreira Sabba

    Full Text Available Summary Chiari malformation (CM is the most common and prevalent symptomatic congenital craniocervical malformation. Radiological diagnosis is established when the cerebellar tonsils are located 5 mm or more below the level of the foramen magnum on magnetic resonance imaging (MRI. Surgical treatment is indicated whenever there is symptomatic tonsillar herniation or syringomyelia/hydrocephalus. The main surgical treatment for CM without craniocervical instability (such as atlantoaxial luxation is posterior fossa decompression, with or without duraplasty. The authors describe in details and in a stepwise fashion the surgical approach of patients with CM as performed at the State University of Campinas, emphasizing technical nuances for minimizing the risks of the procedure and potentially improving patient outcome.

  18. Pathological Fracture of Clavicle Following Sub-Acromial Decompression-Infraclavicular Compartment Syndrome?

    Directory of Open Access Journals (Sweden)

    S Mukhopadhyay

    2009-11-01

    Full Text Available A 34-year-old factory worker presented with pain and weakness of the left shoulder following a fall on ice on her left shoulder. An ultrasound scan of the shoulder taken 4 months after injury showed small partial articular surface tear of the supraspinatus tendon. Ten days following subacromial decompression she suffered a pathological fracture of her left clavicle. MRI, CT, and isotope bone scans showed no evidence of malignancy or infection but a collection of fluid was noted underlying the clavicle communicating to the acromioclavicular joint. Ultrasound scan guided aspiration of 20 millilitres of bloodstained fluid underlying the clavicle resulted in gradual recovery and adequate healing of the fracture.

  19. Nitrogen Control in VIM Melts

    Science.gov (United States)

    Jablonski, P. D.; Hawk, J. A.

    NETL has developed a design and control philosophy for the addition of nitrogen to austenitic and ferritic steels. The design approach uses CALPHAD as the centerpiece to predict the level to which nitrogen is soluble in both the melt and the solid. Applications of this technique have revealed regions of "exclusion" in which the alloy, while within specification limits of prescribed, cannot be made by conventional melt processing. Furthermore, other investigations have found that substantial retrograde solubility of nitrogen exists, which can become problematic during subsequent melt processing and/or other finishing operations such as welding. Additionally, the CALPHAD method has been used to adjust primary melt conditions. To that end, nitrogen additions have been made using chrome nitride, silicon nitride, high-nitrogen ferrochrome as well as nitrogen gas. The advantages and disadvantages of each approach will be discussed and NETL experience in this area will be summarized with respect to steel structure.

  20. Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting-Selection Guidelines.

    Science.gov (United States)

    Gokuldoss, Prashanth Konda; Kolla, Sri; Eckert, Jürgen

    2017-06-19

    Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting) for fabricating a specific component with a defined set of material properties.

  1. Additive Manufacturing Processes: Selective Laser Melting, Electron Beam Melting and Binder Jetting—Selection Guidelines

    Science.gov (United States)

    Konda Gokuldoss, Prashanth; Kolla, Sri; Eckert, Jürgen

    2017-01-01

    Additive manufacturing (AM), also known as 3D printing or rapid prototyping, is gaining increasing attention due to its ability to produce parts with added functionality and increased complexities in geometrical design, on top of the fact that it is theoretically possible to produce any shape without limitations. However, most of the research on additive manufacturing techniques are focused on the development of materials/process parameters/products design with different additive manufacturing processes such as selective laser melting, electron beam melting, or binder jetting. However, we do not have any guidelines that discuss the selection of the most suitable additive manufacturing process, depending on the material to be processed, the complexity of the parts to be produced, or the design considerations. Considering the very fact that no reports deal with this process selection, the present manuscript aims to discuss the different selection criteria that are to be considered, in order to select the best AM process (binder jetting/selective laser melting/electron beam melting) for fabricating a specific component with a defined set of material properties. PMID:28773031

  2. Modeling the summertime evolution of sea-ice melt ponds

    DEFF Research Database (Denmark)

    Lüthje, Mikael; Feltham, D.L.; Taylor, P.D.

    2006-01-01

    We present a mathematical model describing the summer melting of sea ice. We simulate the evolution of melt ponds and determine area coverage and total surface ablation. The model predictions are tested for sensitivity to the melt rate of unponded ice, enhanced melt rate beneath the melt ponds...

  3. The Mars Project: Avoiding Decompression Sickness on a Distant Planet

    Science.gov (United States)

    Conkin, Johnny

    2000-05-01

    A cost-effective approach for Mars exploration is to use available resources, such as water and atmospheric gases. Nitrogen (N2) and argon (Ar) are available and could form the inert gas component of a habitat atmosphere at 8.0, 9.0, or 10.0 pounds per square inch (psia). The habitat and space suit are designed as an integrated system: a comfortable living environment about 85% of the time and a safe working environment about 15% of the time. A goal is to provide a system that permits unrestricted exploration of Mars, but the risk of decompression sickness (DCS) during the extravehicular activity in a 3.75-psia suit, after exposure to any of the three habitat conditions, may limit unrestricted exploration. I evaluate here the risk of DCS since a significant proportion of a trinary breathing gas in the habitat might contain Ar. I draw on past experience and published information to extrapolate into untested, multivariable conditions to evaluate risk. A rigorous assessment of risk as a probability of DCS for each habitat condition is not yet possible. Based on many assumptions about Ar in hypobaric decompressions, I conclude that the presence of Ar significantly increases the risk of DCS. The risk is significant even with the best habitat option: 2.56 psia oxygen, 3.41 psia N2, and 2.20 psia Ar. Several hours of prebreathing 100% 02, a higher suit pressure, or a combination of other important variables such as limited exposure time on the surface or exercise during prebreathe would be necessary to reduce the risk of DCS to an acceptable level. The acceptable level for DCS risk on Mars has not yet been determined. Mars is a great distance from Earth and therefore from primary medical care. The acceptable risk would necessarily be defined by the capability to treat DCS in the Rover vehicle, in the habitat, or both.

  4. Exploiting Aerobic Fitness to Reduce Risk of Hypobaric Decompression Sickness

    Science.gov (United States)

    Conkin, J.; Gernhardt, M. L.; Wessel, J. H.

    2007-01-01

    Decompression sickness (DCS) is multivariable. But we hypothesize an aerobically fit person is less likely to experience hypobaric DCS than an unfit person given that fitness is exploited as part of the denitrogenation (prebreathe, PB) process prior to an altitude exposure. Aerobic fitness is peak oxygen uptake (VO2pk, ml/kg/min). Treadmill or cycle protocols were used over 15 years to determine VO2pks. We evaluated dichotomous DCS outcome and venous gas emboli (VGE) outcome detected in the pulmonary artery with Doppler ultrasound associated with VO2pk for two classes of experiments: 1) those with no PB or PB under resting conditions prior to ascent in an altitude chamber, and 2) PB that included exercise for some part of the PB. There were 165 exposures (mean VO2pk 40.5 plus or minus 7.6 SD) with 25 cases of DCS in the first protocol class and 172 exposures (mean VO2pk 41.4 plus or minus 7.2 SD) with 25 cases of DCS in the second. Similar incidence of the DCS (15.2% vs. 14.5%) and VGE (45.5% vs. 44.8%) between the two classes indicates that decompression stress was similar. The strength of association between outcome and VO2pk was evaluated using univariate logistic regression. An inverse relationship between the DCS outcome and VO2pk was evident, but the relationship was strongest when exercise was done as part of the PB (exercise PB, coef. = -0.058, p = 0.07; rest or no PB, coef. = -0.005, p = 0.86). There was no relationship between VGE outcome and VO2pk (exercise PB, coef. = -0.003, p = 0.89; rest or no PB, coef. = 0.014, p = 0.50). A significant change in probability of DCS was associated with fitness only when exercise was included in the denitrogenation process. We believe a fit person that exercises during PB efficiently eliminates dissolved nitrogen from tissues.

  5. The Laser Damage Threshold for Materials and the Relation Between Solid-Melt and Melt-Vapor Interface Velocities

    International Nuclear Information System (INIS)

    Khalil, Osama Mostafa

    2010-01-01

    Numerous experiments have demonstrated and analytic theories have predicted that there is a threshold for pulsed laser ablation of a wide range of materials. Optical surface damage threshold is a very complex and important application of high-power lasers. Optical damage may also be considered to be the initial phase of laser ablation. In this work it was determined the time required and the threshold energy of a layer of thickness to heat up. We used the Finite Difference method to simulate the process of laser-target interaction in three cases. Namely, the case before melting begins using a continuous wave (c.w) laser source and a pulsed laser source, the case after the first change of state (from solid to melt), and the case after the second change of state (from melt to vapor). And also study the relation between the solid-melt and melt-vapor interface velocities to have a commonsense of the laser ablation process.

  6. The relationship between cervical lordosis and Nurick scores in patients undergoing circumferential vs. posterior alone cervical decompression, instrumentation and fusion for treatment of cervical spondylotic myelopathy.

    Science.gov (United States)

    Patel, Shalin; Glivar, Phillip; Asgarzadie, Farbod; Cheng, David Juma Wayne; Danisa, Olumide

    2017-11-01

    The loss of regional cervical sagittal alignment and the progressive development of cervical kyphosis is a factor in the advancement of myelopathy. Adequate decompression of the spinal canal along with reestablishment of cervical lordosis are desired objective with regard to the surgical treatment of patients with cervical spondylotic myelopathy. A retrospective chart review was conducted in which patients who underwent either a combined anterior/posterior instrumentation and decompression or a posterior alone instrumentation and decompression for the treatment of CSM at our institution were identified. Any patient undergoing operative intervention for trauma, infection or tumors were excluded. Similarly, patients undergoing posterior instrumentation with constructs extending beyond the level of C2-C7 were similarly excluded from this study. A total of 67 patients met the inclusion criteria for this study. A total of 32 patients underwent posterior alone surgery and the remaining 35 underwent combined anterior/posterior procedure. Radiographic evaluation of patient's preoperative and postoperative cervical lordosis as measured by the C2-C7 Cobb angle was performed. Each patient's preoperative and postoperative functional disability as enumerated by the Nurick score was also recorded. Statistical analysis was conducted to determine if there was a significant relationship between improvement in cervical lordosis and improvement in patient's clinical outcomes as enumerated by the Nurick Score in patients undergoing posterior alone versus combined anterior/posterior decompression, instrumentation and fusion of the cervical spine. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Melt-processing method for radioactive solid wastes

    International Nuclear Information System (INIS)

    Kobayashi, Hiroaki

    1998-01-01

    Radioactive solid wastes are charged into a water-cooled type cold crucible induction melting furnace disposed in high frequency coils, and high frequency currents are supplied to high frequency coils which surround the melting furnace to melt the solid wastes by induction-heating. In this case, heat plasmas are jetted from above the solid wastes to the solid wastes to conduct initial heating to melt a portion of the solid wastes. Then, high frequency currents are supplied to the high frequency coils to conduct induction heating. According to this method, even when waste components of various kinds of materials are mixed, a portion of the solid wastes in the induction melting furnace can be melted by the initial heating by jetting heat plasmas irrespective of the kinds and the electroconductivity of the materials of the solid wastes. With such procedures, entire solid wastes in the furnace can be formed into a molten state uniformly and rapidly. (T.M.)

  8. Effect of metabolic gases and water vapor, perfluorocarbon emulsions, and nitric oxide on tissue bubbles during decompression sickness.

    Science.gov (United States)

    Randsøe, Thomas

    2016-05-01

    In aviation and diving, fast decrease in ambient pressure, such as during accidental loss of cabin pressure or when a diver decompresses too fast to sea level, may cause nitrogen (N2) bubble formation in blood and tissue resulting in decompression sickness (DCS). Conventional treatment of DCS is oxygen (O2) breathing combined with recompression.  However, bubble kinetic models suggest, that metabolic gases, i.e. O2 and carbon dioxide (CO2), and water vapor contribute significantly to DCS bubble volume and growth at hypobaric altitude exposures. Further, perfluorocarbon emulsions (PFC) and nitric oxide (NO) donors have, on an experimental basis, demonstrated therapeutic properties both as treatment and prophylactic intervention against DCS. The effect was ascribed to solubility of respiratory gases in PFC, plausible NO elicited nuclei demise and/or N2 washout through enhanced blood flow rate. Accordingly, by means of monitoring injected bubbles in exposed adipose tissue or measurements of spinal evoked potentials (SEPs) in anaesthetized rats, the aim of this study was to: 1) evaluate the contribution of metabolic gases and water vapor to bubble volume at different barometrical altitude exposures, 2) clarify the O2 contribution and N2 solubility from bubbles during administration of PFC at normo- and hypobaric conditions and, 3) test the effect of different NO donors on SEPs during DCS upon a hyperbaric air dive and, to study the influence of  NO on tissue bubbles at high altitude exposures. The results support the bubble kinetic models and indicate that metabolic gases and water vapor contribute significantly to bubble volume at 25 kPa (~10,376 m above sea level) and constitute a threshold for bubble stabilization or decay at the interval of 47-36 kPa (~6,036 and ~7,920 m above sea level). The effect of the metabolic gases and water vapor seemed to compromise the therapeutic properties of both PFC and NO at altitude, while PFC significantly increased bubble

  9. [Effectiveness of multiple small-diameter drilling decompression combined with hip arthroscopy for early osteonecrosis of the femoral head].

    Science.gov (United States)

    Li, Ji; Li, Zhongli; Su, Xiangzheng; Liu, Chunhui; Zhang, Hao; Wang, Ketao

    2017-09-01

    To evaluate the effectiveness of multiple small-diameter drilling decompression combined with hip arthroscopy for early oeteonecrosis of the femoral head (ONFH). Between March 2010 and December 2013, 91 patients with early ONFH were treated with the operation of multiple small-diameter drilling decompression combined with hip arthroscopy in 39 cases (53 hips, group A) or with drilling decompression alone in 52 cases (74 hips, group B). The patients in 2 groups had obvious hip pain and limited motion before operation. There was no significant difference in gender, age, etiology, effected side, stage of osteonecrosis, and preoperative Harris score between 2 groups ( P >0.05). All operations succeeded and all incisions healed by first intention. The operation time was significantly longer in group A [(73.3±10.6) minutes] than in group B [(41.5±7.2) minutes] ( t =8.726, P =0.000). Temporary of sciatic nerve apraxia after operation occurred in 2 patients of group A, and no complication occurred in other patients. Patients were followed up 24-52 months (mean, 39.3 months) in group A and 24-48 months (mean, 34.6 months) in group B. At last follow-up, the Harris scores were 83.34±8.76 in group A and 76.61±9.22 in group B, showing significant differences when compared between 2 groups ( t =-4.247, P =0.029) and when compared with preoperative values in 2 groups ( t =-10.327, P =0.001; t =-8.216, P =0.008). X-ray films showed that the collapse of the femoral head was observed in 6 hips (1 hip at stage Ⅰand 5 hips at stage Ⅱ) in group A, and in 16 hips (4 hips at stageⅠand 12 hips at stage Ⅱ) in group B; and hip arthroplasty was performed. The total effective rates were 88.68% (47/53) in group A and 78.38% (58/74) in group B, respectively; showing significant difference between 2 groups ( χ 2 =5.241, P =0.041). Multiple small-diameter drilling decompression combined with hip arthroscopy is effective in pain relief, improvement of hip function, slowing-down the

  10. Realization of Copper Melting Point for Thermocouple Calibrations

    Directory of Open Access Journals (Sweden)

    Y. A. ABDELAZIZ

    2011-08-01

    Full Text Available Although the temperature stability and uncertainty of the freezing plateau is better than that of the melting plateau in most of the thermometry fixed points, but realization of melting plateaus are easier than that of freezing plateaus for metal fixed points. It will be convenient if the melting points can be used instead of the freezing points in calibration of standard noble metal thermocouples because of easier realization and longer plateau duration of melting plateaus. In this work a comparison between the melting and freezing points of copper (Cu was carried out using standard noble metal thermocouples. Platinum - platinum 10 % rhodium (type S, platinum – 30 % rhodium / platinum 6 % rhodium (type B and platinum - palladium (Pt/Pd thermocouples are used in this study. Uncertainty budget analysis of the melting points and freezing points is presented. The experimental results show that it is possible to replace the freezing point with the melting point of copper cell in the calibration of standard noble metal thermocouples in secondary-level laboratories if the optimal methods of realization of melting points are used.

  11. Partial enthalpies of Bi and Te in Bi-Te melts and of In and Te in In-Te melts

    International Nuclear Information System (INIS)

    Yassin, Abeer; Amzil, Abdelhamid; Castanet, Robert

    2000-01-01

    Full text.Calorimetric measurement are reported which allow the enthalpic behaviour of Bi-Te melts to be established. Further work is required, however, to supplement results obtained for In-Te melts. The partial enthalpies of bismuth and tellurium in the Bi-Te melts at 755K and those of indium and tellurium in the In-Te melts at 1010 and 987K were measured at high dilution by direct reaction calorimetry (drop method) with the help of a Tian-Calvet calorimeter. The limiting partial enthalpies of the components were deduced by extrapolation at infinite dilution: Δh f,∞ B i(755K)/KJ.mol -1 = -34.0 and Δh f,∞ Te(755K) /KJ·mol -1 = -24.1 in the Bi-Te melts Δh f,∞ In(1010K) /KJ·mol -1 = -75.9 and Δh f,∞ Te(1010K) /KJ·mol -1 = -47.8 in the In-Te melts Δh f,∞ In(987K) /KJ·mol -1 = -75.2 and Δh f,∞ Te(987K) /KJ·mol -1 = -48.0 in the In-Te melts

  12. Incidence of Decompression Illness and Other Diving Related Medical Problems Amongst Royal Navy Divers 1995-1999

    Science.gov (United States)

    1999-01-01

    conditions hypobares ou hyperbares ] To order the complete compilation report, use: ADA395680 The component part is provided here to allow users access to...following report: TITLE: Operational Medical Issues in Hypo-and Hyperbaric Conditions [les Questions medicales a caractere oprationel liees aux...Navy diving accidents, and with the assistance of the British Hyperbaric Association (BHA) all civilian cases of decompression illness treated by member

  13. Ferric iron partitioning between pyroxene and melt during partial melting of the Earth's upper mantle

    Science.gov (United States)

    Rudra, A.; Hirschmann, M. M.

    2017-12-01

    The oxidation state of the Earth's mantle influences melt production, volatile behavior, partitioning of key trace elements and possible saturation of alloy at depth. Average Fe3+/FeT ratios in MORBs indicate oxygen fugacitiy of the source regions is close to QFM, in contrast to a 3 log unit variation of fO2 recorded by abyssal peridotites. Quantification of the relationship between basalt and source Fe3+/FeT, oxygen fugacity, and melting requires constraints on Fe3+ partitioning between melt and mantle minerals and in particular the principal Fe3+ host, pyroxene. McCanta et al. (2004) investigated valence dependent partitioning of Fe between Martian ferroan pigeonites and melt, but behavior in terrestrial pyroxene compositions relevant to MORB petrogenesis has not been investigated. We are conducting 1 atm controlled fO2 experiments over 4 log unit variation of fO2 between ΔQFM = 2.5 to -1.5 to grow pyroxenes of variable tetrahedral and octahedral cationic population from andesitic melts of varying Mg#, alumina and alkali content. Dynamic crystallization technique facilitates growth of pyroxene crystals (100-200 um) that EPMA analyses show to be compositionally homogeneous and in equilibrium with the melt. Fe3+/FeT ratio of the synthetic pyroxenes have been analyzed by XAFS spectroscopy at the APS (GSECARS) synchrotron. To quantify the x-ray anisotropy in pyroxenes, we collected Fe K-edge XAFS spectra of oriented natural single crystals for a wide range compositions whose Fe3+/FeT ratios we determined by Mossbauer spectroscopy. We have collected both XANES and EXAFS spectral regions spanning from 7020-7220 eV to explore predictive capabilities of different spectral regions about ferric iron concentration and site occupancy. Our results will document the Fe3+ compatibility in pyroxenes of different compositions under a variety of fO2 conditions, which in turn will better constrain the interrelationship between mantle redox and melting.

  14. Plasma arc melting of zirconium

    International Nuclear Information System (INIS)

    Tubesing, P.K.; Korzekwa, D.R.; Dunn, P.S.

    1997-01-01

    Zirconium, like some other refractory metals, has an undesirable sensitivity to interstitials such as oxygen. Traditionally, zirconium is processed by electron beam melting to maintain minimum interstitial contamination. Electron beam melted zirconium, however, does not respond positively to mechanical processing due to its large grain size. The authors undertook a study to determine if plasma arc melting (PAM) technology could be utilized to maintain low interstitial concentrations and improve the response of zirconium to subsequent mechanical processing. The PAM process enabled them to control and maintain low interstitial levels of oxygen and carbon, produce a more favorable grain structure, and with supplementary off-gassing, improve the response to mechanical forming

  15. Sural artery perforator flap with posterior tibial neurovascular decompression for recurrent foot ulcer in leprosy patients

    Directory of Open Access Journals (Sweden)

    Ismail, Hossam El-din Ali

    2017-01-01

    Full Text Available Introduction: The sensory loss and alteration of the shape of the foot make the foot liable to trauma and pressure, and subsequently cause more callus formation, blisters, and ulcers. Foot ulcers usually are liable to secondary infection as cellulitis or osteomyelitis, and may result in amputations. Foot ulcers are a major problem and a major cause of handicaps in leprosy patients. The current study is to present our clinical experience and evaluate the use of sural flap with posterior tibial neurovascular decompression (PTND in recurrent foot ulcers in leprosy patients.Patient and methods: A total number of 9 patients were suffering from chronic sequelae of leprosy as recurrent foot ulcers. All the patients were reconstructed with the reverse sural artery fasciocutaneous flap with posterior tibial neurovascular decompression from September 2012 to August 2015. Six patients were male and three were female with a mean age of 39.8 years (range, 30–50 years. All the soft tissue defects were in the weight-bearing area of the inside of the foot. The flap sizes ranged from 15/4 to 18/6 cm. Mean follow-up period was 21.2 months (range, 35–2 months.Results: All the flaps healed uneventfully. There was no major complication as total flap necrosis. Only minor complications occurred which were treated without surgical intervention except in two patients who developed superficial necrosis of the skin paddle. Surgical debridement was done one week later. The flap was completely viable after surgery, and the contour of the foot was restored. We found that an improvement of sensation occurred in those patients in whom the anesthesia started one year ago or less and no sensory recovery in patient in whom the anesthesia had lasted for more than two years.Conclusion: The reverse sural artery flap with posterior tibial neurovascular decompression provides a reliable method for recurrent foot soft tissue reconstruction in leprosy patients with encouraging

  16. Decompression Induced Crystallization of Basaltic Andesite Magma: Constraints on the Eruption of Arenal Volcano, Costa Rica.

    Science.gov (United States)

    Szramek, L. A.; Gardner, J. E.; Larsen, J. F.

    2004-12-01

    Arenal Volcano is a small stratovolcano located 90 km NW of San Jose, Costa Rica. In 1968 current activity began with a Plinian phase, and has continued to erupt lava flows and pyroclastic flows intermittently since. Samples from the Plinian, pyroclastic flow, strombolian, and effusive phases have been studied texturally. Little variation in crystallinity occurs amongst the different phases. Number density of crystals, both 2D and 3D are 50-70 mm-2 and 30,000-50,000 mm-3 in the Plinian sample, compared to the lesser values in other eruptive types. Characteristic crystal size also increases as explosivity decreases. Two samples, both lava flows collected while warm, overlap with the Plinian sample. This suggests that the variations seen may be a result of cooling history. Plagioclase differs between the Plinian sample, in which they are only tabular in shape, and the other eruptive types, which contain both tabular and equant crystals. To link decompression paths of the Arenal magma to possible pre-eruptive conditions, we have carried out hydrothermal experiments. The experiments were preformed in TZM pressure vessels buffered at a fugacity of Ni-NiO and water saturation. Phase equilibria results in conjunction with mineral compositions and temperature estimates by previous workers from active lava flows and two-pyroxene geothermometry, constrain the likely pre-eruptive conditions for the Arenal magma to 950-1040° C with a water pressure of 50-80 MPa. Samples that started from conditions that bracket our estimated pre-eruptive conditions were decompressed in steps of 5-30 MPa and held for various times at each step until 20 MPa was reached, approximating average decompression rates of 0.25, 0.025, 0.0013 MPa/s. Comparison of textures found in the natural samples to the experimentally produced textures suggest that the Plinian eruption likely was fed by magma ascending at 0.05-1 m/s, whereas the less explosive phases were fed by magma ascending at 0.05 m/s or less.

  17. Effects of surface shape on the geometry and surface topography of the melt pool in low-power density laser melting

    KAUST Repository

    Kim, Youngdeuk; Kim, Wooseung

    2011-01-01

    The quantitative correlations between workpiece volume and melt pool geometry, as well as the flow and thermal features of the melt pool are established. Thermocapillary convections in melt pool with a deformable free surface are investigated

  18. Decompressive craniectomy in massive cerebral infarction Craniectomia descompressiva no infarto cerebral extenso

    Directory of Open Access Journals (Sweden)

    João Paulo Mattos

    2010-06-01

    Full Text Available Twenty one patients were submitted to decompressive craniectomy for massive cerebral infarct. Ten patients (47.6% presented a good outcome at the 6 months evaluation, eight had a poor outcome (38% and three died (14.2%. There was no outcome statistical difference between surgery before and after 24 hours of ictus, dominant and non-dominant stroke groups. Patients older than 60 years and those who had a Glasgow Coma Scale (GCS8 at pre-surgical exam and decompressive craniectomy before signs of brain herniation represent the main factors related to a better outcome. Dominant hemispheric infarction does not represent exclusion criteria.Vinte e um pacientes foram submetidos a craniectomia descompressiva para o tratamento de infarto cerebral extenso. Dez pacientes (47,6% apresentaram boa evolução em avaliação após 6 meses, 8 apresentaram evolução desfavorável (38% e 3 faleceram (14,2%. Durante o seguimento, não se evidenciou diferença estatística na evolução entre pacientes operados antes e após 24 horas do ictus, nem entre lesões envolvendo o hemisfério dominante versus não dominante. Pacientes com mais de 60 anos e aqueles com Escala de Coma de Glasgow (ECG8 no exame pré-operatório e craniectomia descompressiva antes de sinais de herniação cerebral representam os principais fatores relacionados a uma melhor evolução clínica. Infarto hemisférico envolvendo o hemisfério dominante não representa um critério de exclusão.

  19. MELTS_Excel: A Microsoft Excel-based MELTS interface for research and teaching of magma properties and evolution

    Science.gov (United States)

    Gualda, Guilherme A. R.; Ghiorso, Mark S.

    2015-01-01

    thermodynamic modeling software MELTS is a powerful tool for investigating crystallization and melting in natural magmatic systems. Rhyolite-MELTS is a recalibration of MELTS that better captures the evolution of silicic magmas in the upper crust. The current interface of rhyolite-MELTS, while flexible, can be somewhat cumbersome for the novice. We present a new interface that uses web services consumed by a VBA backend in Microsoft Excel©. The interface is contained within a macro-enabled workbook, where the user can insert the model input information and initiate computations that are executed on a central server at OFM Research. Results of simple calculations are shown immediately within the interface itself. It is also possible to combine a sequence of calculations into an evolutionary path; the user can input starting and ending temperatures and pressures, temperature and pressure steps, and the prevailing oxidation conditions. The program shows partial updates at every step of the computations; at the conclusion of the calculations, a series of data sheets and diagrams are created in a separate workbook, which can be saved independently of the interface. Additionally, the user can specify a grid of temperatures and pressures and calculate a phase diagram showing the conditions at which different phases are present. The interface can be used to apply the rhyolite-MELTS geobarometer. We demonstrate applications of the interface using an example early-erupted Bishop Tuff composition. The interface is simple to use and flexible, but it requires an internet connection. The interface is distributed for free from http://melts.ofm-research.org.

  20. Melting technique for vanadium containing steels

    Energy Technology Data Exchange (ETDEWEB)

    Grishanov, M P; Gutovskij, I B; Vakhrushev, A S

    1980-04-28

    To descrease cost price of high-quality vanadium steels a method of their melting in open-hearth furnaces with acid lining using slag-metal fraction of vanadium, which is loaded in the content of 2.1-4.7% of melting mass, is suggested. Introduction of slag-metal fraction of vanadium ensures the formation of slag with composition that guarantees the necessary content of vanadium in steel and does not require introduction of expensive vanadium-containing ferroalloys into the melt.

  1. Effectiveness of Standardized Physiotherapy Exercises for Patients With Difficulty Returning to Usual Activities After Decompression Surgery for Subacromial Impingement Syndrome

    DEFF Research Database (Denmark)

    Christiansen, David Høyrup; Frost, Poul; Falla, Deborah

    2016-01-01

    BACKGROUND: Little is known about the effectiveness of exercise programs after decompression surgery for subacromial impingement syndrome. For patients with difficulty returning to usual activities, special efforts may be needed to improve shoulder function. OBJECTIVE: The purpose of this study w...

  2. Influence of gas-generation on melt/concrete interaction

    International Nuclear Information System (INIS)

    Powers, D.A.

    1979-01-01

    Gases formed during the interaction of a high-temperature melt with concrete are shown to stem from the thermal dehydration and decarboxylation of the concrete. The kinetics of these decomposition reactions are described. Gases within the melt cause an apparent swelling of the melt. The observed swelling is not easily correlated to the rate of gas evolution. Metallic melts cause CO 2 /CO and H 2 O liberated from the melt to be reduced to CO and hydrogen. When these gases escape from the melt they assist in aerosol formation. As the gases cool they react along a pathway whose oxygen fugacity is apparently buffered by the iron-Wuestite equilibrium. Methane is a product of the gas-phase reaction. (orig./HP) [de

  3. Rhenium corrosion in chloride melts

    International Nuclear Information System (INIS)

    Stepanov, A.D.; Shkol'nikov, S.N.; Vetyukov, M.M.

    1989-01-01

    The results investigating rhenium corrosion in chloride melts containing sodium, potassium and chromium ions by a gravimetry potentials in argon atmosphere in a sealing quarth cell are described. Rhenium corrosion is shown to be rather considerable in melts containing CrCl 2 . The value of corrosion rate depending on temperature is determined

  4. UNCONSTRAINED MELTING AND SOLIDIFICATION INSIDE ...

    African Journals Online (AJOL)

    2015-09-01

    Sep 1, 2015 ... There is a large number of experimental and numerical works on melting and solidification of PCM[6-10], and also its usage as thermal management in building [11-14], electronic devices [15-16] and solar energy. [17-20].Most investigated geometries in melting and freezing process are sphere (spherical.

  5. Shape evolution of a melting nonspherical particle

    Science.gov (United States)

    Kintea, Daniel M.; Hauk, Tobias; Roisman, Ilia V.; Tropea, Cameron

    2015-09-01

    In this study melting of irregular ice crystals was observed in an acoustic levitator. The evolution of the particle shape is captured using a high-speed video system. Several typical phenomena have been discovered: change of the particle shape, appearance of a capillary flow of the melted liquid on the particle surface leading to liquid collection at the particle midsection (where the interface curvature is smallest), and appearance of sharp cusps at the particle tips. No such phenomena can be observed during melting of spherical particles. An approximate theoretical model is developed which accounts for the main physical phenomena associated with melting of an irregular particle. The agreement between the theoretical predictions for the melting time, for the evolution of the particle shape, and the corresponding experimental data is rather good.

  6. Melt-quenched glasses of metal-organic frameworks

    DEFF Research Database (Denmark)

    Bennett, T.D.; Yue, Yuanzheng; Li, P.

    2016-01-01

    Crystalline solids dominate the field of metal−organic frameworks (MOFs), with access to the liquid and glass states of matter usually prohibited by relatively low temperatures of thermal decomposition. In this work, we give due consideration to framework chemistry and topology to expand...... of other MOFs. The glasses formed upon vitrification are chemically and structurally distinct from the three other existing categories of melt-quenched glasses (inorganic nonmetallic, organic, and metallic), and retain the basic metal−ligand connectivity of crystalline MOFs, which connects their mechanical...... the phenomenon of the melting of 3D MOFs, linking crystal chemistry to framework melting temperature and kinetic fragility of the glass-forming liquids. Here we show that melting temperatures can be lowered by altering the chemistry of the crystalline MOF state, which provides a route to facilitate the melting...

  7. Sigmoid volvulus in an adolescent girl: staged management with emergency colonoscopic reduction and decompression followed by elective sigmoid colectomy

    Science.gov (United States)

    Patel, Ramnik V; Njere, Ike; Campbell, Alison; Daniel, Rejoo; Azaz, Amer; Fleet, Mahmud

    2014-01-01

    A case of acute sigmoid volvulus in a 14-year-old adolescent girl presenting with acute low large bowel obstruction with a background of chronic constipation has been presented. Abdominal radiograph and CT scan helped in diagnosis. She underwent emergency colonoscopic detorsion and decompression uneventfully. Lower gastrointestinal contrast study showed very redundant sigmoid colonic loop without any transition zone and she subsequently underwent elective sigmoid colectomy with good outcome. The sigmoid volvulus should be considered in the differential diagnosis of paediatric acute abdomen presenting with marked abdominal distention, absolute constipation and pain but without vomiting. Plain abdominal radiograph and the CT scan are helpful to confirm the diagnosis. Early colonoscopic detorsion and decompression allows direct visualisation of the vascular compromise, assessment of band width of the volvulus and can reduce complications and mortality. Associated Hirschsprung's disease should be suspected if clinical and radiological features are suggestive in which case a rectal biopsy before definitive surgery should be considered. PMID:25143313

  8. Melt inclusion: methods, applications and problem: Silica-rich melts in quartz xenoliths from Vulcano islands and their bearing on processes of crustal melting and crust-magma interaction in the Aeolian Arc, Italy

    NARCIS (Netherlands)

    Frezzotti, M.L.; Zavon, V.; Peccerillo, A.; Nikogosian, I.

    2002-01-01

    Silica-rich melts in quartz xenoliths from Vulcano islands and their bearing on processes of crustal melting and crust-magma interaction in the Aeolian Arc, Italy Proceedings of workshop Melt inclusion: methods, applications and problem. Napoli, Italy, September 2002, p. 71-73

  9. Study on superheat of TiAl melt during cold crucible levitation melting. TiAl no cold crucible levitation yokai ni okeru yoto kanetsudo no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Miwa, K.; Kobayashi, K.; Ninomiya, M. (Government Industrial Research Institute, Nagoya, Nagoya (Japan))

    1992-06-20

    Investigations were given on effects of test sample weights and sample positions in cold crucibles on superheat of melts when the intermetallic compound TiAl is melted using cold crucible levitation melting process, one of noncontaminated melting processes. The cold crucibles used in the experiment are a water-cooled copper crucible with an inner diameter of 42 mm and a length of 140 mm, into which a column-like ingot sample with an outer diameter of 32 mm (Al containing Ti at 33.5% by mass) was put and melted using the levitation melting. Comparisons and discussions were given on the relationship between sample weights and melt temperatures, the relationship between positions of the inserted samples and melt temperatures, and the state of contamination at melting of casts obtained from the melts resulted from the levitation melting and high-frequency melting poured into respective ceramic dies. Elevating the superheat temperature of the melts requires optimizing the sample weights and positions. Melt temperatures were measured using a radiation thermometer and a thermocouple, and the respective measured values were compared. 7 refs., 4 figs., 1 tab.

  10. A model of sulphur solubility for hydrous mafic melts: application to the determination of magmatic fluid compositions of Italian volcanoes

    Directory of Open Access Journals (Sweden)

    M. Pichavant

    2005-06-01

    Full Text Available We present an empirical model of sulphur solubility that allows us to calculate f S2 if P, T, fO2 and the melt composition, including H2O and S, are known. The model is calibrated against three main experimental data bases consisting in both dry and hydrous silicate melts. Its prime goal is to calculate the f S2 of hydrous basalts that currently lack experimental constraints of their sulphur solubility behaviour. Application of the model to Stromboli, Vesuvius, Vulcano and Etna eruptive products shows that the primitive magmas found at these volcanoes record f S2 in the range 0.1-1 bar. In contrast, at all volcanoes the magmatic evolution is marked by dramatic variations in f S2 that spreads over up to 9 orders of magnitude. The f S2 can either increase during differentiation or decrease during decompression to shallow reservoirs, and seems to be related to closed versus open conduit conditions, respectively. The calculated f S2 shows that the Italian magmas are undersaturated in a FeS melt, except during closed conduit conditions, in which case differentiation may eventually reach conditions of sulphide melt saturation. The knowledge of f S2, fO2 and fH2O allows us to calculate the fluid phase composition coexisting with magmas at depth in the C-O-H-S system. Calculated fluids show a wide range in composition, with CO2 mole fractions of up to 0.97. Except at shallow levels, the fluid phase is generally dominated by CO2 and H2O species, the mole fractions of SO2 and H2S rarely exceeding 0.05 each. The comparison between calculated fluid compositions and volcanic gases shows that such an approach should provide constraints on both the depth and mode of degassing, as well as on the amount of free fluid in magma reservoirs. Under the assumption of a single step separation of the gas phase in a closed-system condition, the application to Stromboli and Etna suggests that the main reservoirs feeding the eruptions and persistent

  11. Use of concentrated bone marrow aspirate and platelet rich plasma during minimally invasive decompression of the femoral head in the treatment of osteonecrosis.

    Science.gov (United States)

    Martin, John R; Houdek, Matthew T; Sierra, Rafael J

    2013-06-01

    The aim of this paper is to describe our surgical procedure for the treatment of osteonecrosis of the femoral head using a minimally invasive technique. We have limited the use of this procedure for patients with pre-collapse osteonecrosis of the femoral head (Ficat Stage I or II). To treat osteonecrosis of the femoral head at our institution we currently use a combination of outpatient, minimally invasive iliac crest bone marrow aspirations and blood draw combined with decompressions of the femoral head. Following the decompression of the femoral head, adult mesenchymal stem cells obtained from the iliac crest and platelet rich plasma are injected into the area of osteonecrosis. Patients are then discharged from the hospital using crutches to assist with ambulation. This novel technique was utilized on 77 hips. Sixteen hips (21%) progressed to further stages of osteonecrosis, ultimately requiring total hip replacement. Significant pain relief was reported in 86% of patients (n=60), while the rest of patients reported little or no pain relief. There were no significant complications in any patient. We found that the use of a minimally invasive decompression augmented with concentrated bone marrow and platelet rich plasma resulted in significant pain relief and halted the progression of disease in a majority of patients.

  12. Simulation of melt spreading in consideration of phase transitions

    Energy Technology Data Exchange (ETDEWEB)

    Spengler, C. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Koeln (Germany)

    2002-07-01

    The analysis of melt spreading and relocation phenomena in the containment of LWR power plants in case of hypothetical severe accidents leading to core melting is an important issue for reactor safety investigations. For the simulation of melt spreading the code LAVA has been developed on the basis of a method from the related subject of volcanology by adding more detailed models for heat transfer phenomena and flow rheology. The development is supported by basic analysis of the spreading of gravity currents as well as experimental investigations of the rheology of solidifying melts. These exhibit strong non-Newtonian effects in case of a high content of solids in the freezing melt. The basic model assumption in LAVA is the ideal Bingham plastic approach to the non-Newtonian, shear-thinning characteristic of solidifying melts. For the recalculation of melt spreading experiments, the temperature-dependent material properties for solidifying melt mixtures have been calculated using correlations from the literature. With the parameters and correlations for the rheological material properties approached by results from literature, it was possible to recalculate successfully recent spreading experiments with simulant materials and prototypic reactor core materials. An application to the behaviour of core melt in the reactor cavity assumed a borderline case for the issue of spreading. This limit is represented by melt conditions (large solid fraction, low volume flux), under which the melt is hardly spreadable. Due to the persistent volume flux the reactor cavity is completely, but inhomogeneously filled with melt. The degree of inhomogeneity is rather small, so it is concluded, that for the long-term coolability of a melt pool in narrow cavities the spreading of melt will probably have only negligible influence. (orig.)

  13. Hemicraniectomy after middle cerebral artery infarction with life-threatening Edema trial (HAMLET). Protocol for a randomised controlled trial of decompressive surgery in space-occupying hemispheric infarction.

    Science.gov (United States)

    Hofmeijer, Jeannette; Amelink, G Johan; Algra, Ale; van Gijn, Jan; Macleod, Malcolm R; Kappelle, L Jaap; van der Worp, H Bart

    2006-09-11

    Patients with a hemispheric infarct and massive space-occupying brain oedema have a poor prognosis. Despite maximal conservative treatment, the case fatality rate may be as high as 80%, and most survivors are left severely disabled. Non-randomised studies suggest that decompressive surgery reduces mortality substantially and improves functional outcome of survivors. This study is designed to compare the efficacy of decompressive surgery to improve functional outcome with that of conservative treatment in patients with space-occupying supratentorial infarction The study design is that of a multi-centre, randomised clinical trial, which will include 112 patients aged between 18 and 60 years with a large hemispheric infarct with space-occupying oedema that leads to a decrease in consciousness. Patients will be randomised to receive either decompressive surgery in combination with medical treatment or best medical treatment alone. Randomisation will be stratified for the intended mode of conservative treatment (intensive care or stroke unit care). The primary outcome measure will be functional outcome, as determined by the score on the modified Rankin Scale, at one year.

  14. Comparison of exertion required to perform standard and active compression-decompression cardiopulmonary resuscitation.

    Science.gov (United States)

    Shultz, J J; Mianulli, M J; Gisch, T M; Coffeen, P R; Haidet, G C; Lurie, K G

    1995-02-01

    Active compression-decompression (ACD) cardiopulmonary resuscitation (CPR) utilizes a hand-held suction device with a pressure gauge that enables the operator to compress as well as actively decompress the chest. This new CPR method improves hemodynamic and ventilatory parameters when compared with standard CPR. ACD-CPR is easy to perform but may be more labor intensive. The purpose of this study was to quantify and compare the work required to perform ACD and standard CPR. Cardiopulmonary testing was performed on six basic cardiac life support- and ACD-trained St. Paul, MN fire-fighter personnel during performance of 10 min each of ACD and standard CPR on a mannequin equipped with a compression gauge. The order of CPR techniques was determined randomly with > 1 h between each study. Each CPR method was performed at 80 compressions/min (timed with a metronome), to a depth of 1.5-2 inches, and with a 50% duty cycle. Baseline cardiopulmonary measurements were similar at rest prior to performance of both CPR methods. During standard and ACD-CPR, respectively, rate-pressure product was 18.2 +/- 3.0 vs. 23.8 +/- 1.7 (x 1000, P CPR compared with standard CPR. Both methods require subanaerobic energy expenditure and can therefore be sustained for a sufficient length of time by most individuals to optimize resuscitation efforts. Due to the slightly higher work requirement, ACD-CPR may be more difficult to perform compared with standard CPR for long periods of time, particularly by individuals unaccustomed to the workload requirement of CPR, in general.

  15. Decompressive laminectomy for lumbar stenosis: review of 65 consecutive cases from Tema, Ghana.

    Science.gov (United States)

    Andrews, N B; Lawson, H J; Darko, D

    2007-01-01

    There have been previous reports describing patients with lumbar stenosis (LS) in West Africa; however, to date no such report has been published from Ghana. To provide data on the pattern of lumbar stenosis and the effects of decompressive lumbar laminectomy (DLL) on the clinical course of LS in Tema. Sixty-five consecutive patients who underwent DLL for lumbar stenosis over between January 2001 and December 2004 had their medical records analyzed. The parameters of interest included demographics, pre and post surgical clinical status utilizing the modified low back pain clinical scoring system, operative procedure and complications. Sixty-five patients (36M, 29F) with a mean age of 51 years constituted the series. All had failed conservative treatment; each patient was operated on once at our institution. Eighty nine percent of the series presented with neurogenic claudication and accompanying motor and sensory deficits. Twenty-seven patients (41.5%) underwent bilateral DLL; the rest underwent unilateral DLL. The mean preoperative score for the series was 2.3; that for males 2.6, females 1.9 (p > 0.05). There was a significant difference between patients 60 years. The mean postoperative score for the series was 8.7. There was a significant difference between preoperative and postoperative scores of series. No mortality was recorded The complication rate was 15%. In Tema, decompressive lumbar laminectomy for lumbar stenosis achieves significant clinical improvement with attendant low morbidity and mortality rates in patients who have failed conservative treatment. Accompanying disc excision and or fusion are required in only a small minority of patients.

  16. Magnetic susceptibility of semiconductor melts

    International Nuclear Information System (INIS)

    Kutvitskij, V.A.; Shurygin, P.M.

    1975-01-01

    The temperature dependences chi of various alloys confirm the existence of cluster formations in molten semiconductors, the stability of these formations in melts being considerably affected by the anion nature. The concentrational dependences of the magnetic susceptibility for all the investigated systems exhibit the diamagnetism maxima corresponding to the compound compositions. Heating the melt causes ''smearing'' the maxima, which is related with the cluster structure dissociation. The existence of the maxima concentrational dependence chi corresponding to BiTe and BiSe is found in the isotherms. The non-linear dependence of chi on the composition shows the absence of a single-valued relation between the phase diagram and the chi-diagram for melts

  17. Vacancies and a generalised melting curve of metals

    International Nuclear Information System (INIS)

    Gorecki, T.

    1979-01-01

    The vacancy mechanism of the melting process is used as a starting point for deriving an expression for the pressure dependence of the melting temperature of metals. The results obtained for the initial slope of the melting curve are compared with experimental data for 45 metals and in most cases the agreement is very good. The nonlinearity of the melting curve and the appearance of a maximum on the melting curve at a pressure approximately equal to the bulk modules is also predicted, with qualitative agreement with experimental data. A relation between bonding energy, atomic volume, and bulk modulus of metals is established. On the basis of this relation and the proposed vacancy mechanism, a generalised equation for the pressure dependence of the melting temperature of metals is derived. (author)

  18. Medical students who decompress during the M-1 year outperform those who fail and repeat it: A study of M-1 students at the University of Illinois College of Medicine at Urbana-Champaign 1988–2000

    Directory of Open Access Journals (Sweden)

    Freund Gregory G

    2005-05-01

    Full Text Available Abstract Background All medical schools must counsel poor-performing students, address their problems and assist them in developing into competent physicians. The objective of this study was to determine whether students with academic deficiencies in their M-1 year graduate more often, spend less time to complete the curriculum, and need fewer attempts at passing USMLE Step 1 and Step 2 by entering the Decompressed Program prior to failure of the M-1 year than those students who fail the M-1 year and then repeat it. Method The authors reviewed the performance of M-1 students in the Decompressed Program and compared their outcomes to M-1 students who failed and fully repeated the M-1 year. To compare the groups upon admission, t-Tests comparing the Cognitive Index of students and MCAT scores from both groups were performed. Performance of the two groups after matriculation was also analyzed. Results Decompressed students were 2.1 times more likely to graduate. Decompressed students were 2.5 times more likely to pass USMLE Step 1 on the first attempt than the repeat students. In addition, 46% of those in the decompressed group completed the program in five years compared to 18% of the repeat group. Conclusion Medical students who decompress their M-1 year prior to M-1 year failure outperform those who fail their first year and then repeat it. These findings indicate the need for careful monitoring of M-1 student performance and early intervention and counseling of struggling students.

  19. The Belgian End of Mission Transition Period: Lessons Learned from Third Location Decompression after Operational Deployment

    Science.gov (United States)

    2011-04-01

    Third Location Decompression after Operational Deployment 11 - 2 RTO-MP-HFM-205 programs is based upon the literature on combat motivation ...exposure to normal leisure activities and tourism . Massage is another interesting element in the French program. Each soldier receives at least one... gastronomy ; during the French TLD, soldiers were allowed to drink wine or beer with their meal starting at 7pm and bars closed at 1am ultimately. Alcohol

  20. Lessons learnt from FARO/TERMOS corium melt quenching experiments

    Energy Technology Data Exchange (ETDEWEB)

    Magallon, D.; Huhtiniemi, I.; Hohmann, H. [Commission of the European Communities, Ispra (Italy). Joint Research Center

    1998-01-01

    The influence of melt quantity, melt composition, water depth and initial pressure on quenching is assessed on the basis of seven tests performed in various conditions in the TERMOS vessel of the FARO facility at JRC-Ispra. Tests involved UO{sub 2}-based melt quantities in the range 18-176 kg at a temperature of approximately 3000 K poured into saturated water. The results suggest that erosion of the melt jet column is an efficient contributor to the amount of break-up, and thus quenching, for large pours of corium melt. The presence of Zr metal in the melt induced a much more efficient quenching than in a similar test with no Zr metal, attributed to the oxidation of the Zr. Significant amounts of H{sub 2} were produced also in tests with pure oxidic melts (e.g. about 300 g for 157 kg melt). In the tests at 5.0 and 2.0 MPa good mixing with significant melt break-up and quenching was obtained during the penetration in the water. At 0.5 MPa, good penetration of the melt into the water could still be achieved, but a jump in the vessel pressurisation occurred when the melt contacted the bottom and part (5 kg) of the debris was re-ejected from the water. (author)

  1. Melting of gold microclusters

    International Nuclear Information System (INIS)

    Garzon, I.L.; Jellinek, J.

    1991-01-01

    The transition from solid-like to liquid-like behavior in Au n , n=6, 7, 13, clusters is studied using molecular dynamics simulations. A Gupta-type potential with all-neighbour interactions is employed to incorporate n-body effects. The melting-like transition is described in terms of short-time averages of the kinetic energy per particle, root-mean-square bond length fluctuations and mean square displacements. A comparison between melting temperatures of Au n and Ni n clusters is presented. (orig.)

  2. [Treatment of thoracolumbar burst fracture with lateral anterior decompression, internal fixation with Ventrofix and bone graft with titanic mesh].

    Science.gov (United States)

    Zhang, Shi-min; Zhang, Zhao-jie; Liu, Yu-zhang; Zhang, Lu-tang; Li, Xing

    2011-11-01

    To discuss the efficacy of lateral anterior decompression, internal fixation with Ventrofix and bone graft with titanic mesh in the treatment of severe thoracolumbar burst fracture. From January 2008 to January 2010, 21 patients with severe thoracolumbar burst fracture were treated with lateral anterior decompression, internal fixation with Ventrofix, bone graft with titanic mesh. There were 15 males and 6 females, ranging in age from 21 to 46 years with an average of 32.2 years. Segment of fracture: 3 cases were in T11, 6 cases in T12, 7 cases in L1, 5 cases in L2. The mean kyphosis angle was 20.1 degrees and loading of fracture was 7.8 scores. Twenty-one cases accompany with incomplete paralysis. Nerves functions were observed according to Frankel grade; correction and maintain of kyphosis angle were observed by X-rays and CT. All the patients were followed up from 12 to 34 months with an average of 18.5 years. Postoperative complication including injury of pleura in 1 case, dynamic ileus in 2 cases, ilioinguinal nerve injury in 1 case, faulty union of wound in 1 case. All the above complications got recovery after symptomatic treatment. The mean kyphosis angle in fusional segment were 4.2 degrees and the rate of correction was 79%. Nerves functions of all patients got improvement and no internal fixation fail, kyphosis angle obviously lost, titanium mesh shifting, loosening and breakage of screw were found at final follow-up. Lateral anterior decompression, bone graft with titanic mesh, internal fixation with Ventrofix is an idea technique for severe thoracolumber burst fracture, but the method can not be used for patient with severity osteoporosis.

  3. Thirty-five Day Fluoxetine Treatment Limits Sensory-Motor Deficit and Biochemical Disorders in a Rat Model of Decompression Sickness

    Directory of Open Access Journals (Sweden)

    Caroline Cosnard

    2017-09-01

    Full Text Available According to the OECD statistical base for 2014, anti-depressants will, on average, be distributed at a rate of 62 daily doses per 1,000 inhabitants for the 25 countries surveyed (Health at a glance: Europe 2014; OECD Health Statistics; World Health Organization and OECD Health Statistics, 2014. Divers must be concerned. On another hand, divers are potentially exposed to decompression sickness including coagulation inflammation and ischemia, which can result in neurological lesions or even death. The purpose of this study is to assess whether chronic treatment with anti-depressants may represent a contraindication to the practice of an at-risk activity, such as, scuba diving, or even presents a benefit by attenuating the severity of the symptoms. We study for the first time the effect of a 35-day fluoxetine treatment (20 mg/kg on the occurrence of decompression sickness in laboratory rats (n = 79. Following exposure to the hazardous protocol, there is a significant correlation between the type of treatment and the clinical status of the rats in favor of a better clinical prognosis for the rats treated with fluoxetine with a significantly higher number of No DCS status and a lower number of Severe DCS status in the Flux, compared to Controls. The treatment modifies the rat performances both significantly and favorably during the physical and behavioral tests, just like their biological and biochemical constants. After decompression, rats under treatment display lower sensory-motor deficit and lowers biochemical disorders. From a biological point of view, we conclude fluoxetine should not be seen as a contraindication for diving on the basis of anticipated increased physiological risk.

  4. Improved capacitive melting curve measurements

    International Nuclear Information System (INIS)

    Sebedash, Alexander; Tuoriniemi, Juha; Pentti, Elias; Salmela, Anssi

    2009-01-01

    Sensitivity of the capacitive method for determining the melting pressure of helium can be enhanced by loading the empty side of the capacitor with helium at a pressure nearly equal to that desired to be measured and by using a relatively thin and flexible membrane in between. This way one can achieve a nanobar resolution at the level of 30 bar, which is two orders of magnitude better than that of the best gauges with vacuum reference. This extends the applicability of melting curve thermometry to lower temperatures and would allow detecting tiny anomalies in the melting pressure, which must be associated with any phenomena contributing to the entropy of the liquid or solid phases. We demonstrated this principle in measurements of the crystallization pressure of isotopic helium mixtures at millikelvin temperatures by using partly solid pure 4 He as the reference substance providing the best possible universal reference pressure. The achieved sensitivity was good enough for melting curve thermometry on mixtures down to 100 μK. Similar system can be used on pure isotopes by virtue of a blocked capillary giving a stable reference condition with liquid slightly below the melting pressure in the reference volume. This was tested with pure 4 He at temperatures 0.08-0.3 K. To avoid spurious heating effects, one must carefully choose and arrange any dielectric materials close to the active capacitor. We observed some 100 pW loading at moderate excitation voltages.

  5. Inadequate peak expiratory flow meter characteristics detected by a computerised explosive decompression device

    DEFF Research Database (Denmark)

    Miller, M.R.; Atkins, P.R.; Pedersen, O.F.

    2003-01-01

    Methods: The dynamic response of mini-Wright (MW), Vitalograph (V), TruZone (TZ), MultiSpiro (MS) and pneumotachograph (PT) flow meters was tested by delivering two differently shaped flow-time profiles from a computer controlled explosive decompression device fitted with a fast response solenoid.......1) and 257 (39.2), respectively, and at ≈200 l/min they were 51 (23.9) and 1 (0.5). All the meters met ATS accuracy requirements when tested with their waveforms. Conclusions: An improved method for testing the dynamic response of flow meters detects marked overshoot (underdamping) of TZ and MS responses...

  6. The Effectiveness of Self-Expandable Metallic Stent Insertion in Treating Right-Sided Colonic Obstruction: A Comparison between SEMS and Decompression Tube Placement and an Investigation of the Safety and Difficulties of SEMS Insertion in Right Colons

    Directory of Open Access Journals (Sweden)

    Rintaro Moroi

    2014-01-01

    Full Text Available Objectives. Self-expandable metallic stent (SEMS is widely used to treat malignant colonic obstruction. However, most reports about SEMS insertion have concentrated on the left colon. This study aimed to (1 investigate the effectiveness of SEMS insertion compared with conventional decompression tube for right-sided colonic obstruction and (2 compare the safety and technical success of SEMS insertion between left- and right-sided colonic obstructions. Methods. The data from thirty-seven patients who underwent SEMS or conventional decompression tube placement for malignant colonic obstruction in our hospital were analyzed retrospectively. Technical and clinical success, complications, and technical difficulties were analyzed. We compared the results between SEMS insertion and decompression tube placement in right colons and the outcomes of SEMS insertion between right- and left-sided colonic obstructions. Results. For right colons, the clinical success rate of SEMS insertion (100% was significantly higher than that of decompression tube placement (55.9%. Concerning SEMS insertion, the technical difficulty and safety of SEMS insertion were similar between right- and left-sided colonic obstructions. Conclusion. SEMS insertion for right-sided colon is significantly more effective than conventional decompression tube placement, and this procedure was safer and less technically challenging than expected. SEMS insertion should be considered for treating right-sided malignant colonic obstruction.

  7. Differential melt scaling for oblique impacts on terrestrial planets

    Science.gov (United States)

    Abramov, Oleg; Wong, Stephanie M. Wong; Kring, David A. Kring

    2012-01-01

    Analytical estimates of melt volumes produced by a given projectile and contained in a given impact crater are derived as a function of impact velocity, impact angle, planetary gravity, target and projectile densities, and specific internal energy of melting. Applications to impact events and impact craters on the Earth, Moon, and Mars are demonstrated and discussed. The most probable oblique impact (45°) produces ∼1.6 times less melt volume than a vertical impact, and ∼1.6 and 3.7 times more melt volume than impacts with 30° and 15° trajectories, respectively. The melt volume for a particular crater diameter increases with planetary gravity, so a crater on Earth should have more melt than similar-size craters on Mars and the Moon. The melt volume for a particular projectile diameter does not depend on gravity, but has a strong dependence on impact velocity, so the melt generated by a given projectile on the Moon is significantly larger than on Mars. Higher surface temperatures and geothermal gradients increase melt production, as do lower energies of melting. Collectively, the results imply thinner central melt sheets and a smaller proportion of melt particles in impact breccias on the Moon and Mars than on Earth. These effects are illustrated in a comparison of the Chicxulub crater on Earth, linked to the Cretaceous–Tertiary mass extinction, Gusev crater on Mars, where the Mars Exploration Rover Spirit landed, and Tsiolkovsky crater on the Moon. The results are comparable to those obtained from field and spacecraft observations, other analytical expressions, and hydrocode simulations.

  8. Simulation of steam explosion in stratified melt-coolant configuration

    International Nuclear Information System (INIS)

    Leskovar, Matjaž; Centrih, Vasilij; Uršič, Mitja

    2016-01-01

    Highlights: • Strong steam explosions may develop spontaneously in stratified configurations. • Considerable melt-coolant premixed layer formed in subcooled water with hot melts. • Analysis with MC3D code provided insight into stratified steam explosion phenomenon. • Up to 25% of poured melt was mixed with water and available for steam explosion. • Better instrumented experiments needed to determine dominant mixing process. - Abstract: A steam explosion is an energetic fuel coolant interaction process, which may occur during a severe reactor accident when the molten core comes into contact with the coolant water. In nuclear reactor safety analyses steam explosions are primarily considered in melt jet-coolant pool configurations where sufficiently deep coolant pool conditions provide complete jet breakup and efficient premixture formation. Stratified melt-coolant configurations, i.e. a molten melt layer below a coolant layer, were up to now believed as being unable to generate strong explosive interactions. Based on the hypothesis that there are no interfacial instabilities in a stratified configuration it was assumed that the amount of melt in the premixture is insufficient to produce strong explosions. However, the recently performed experiments in the PULiMS and SES (KTH, Sweden) facilities with oxidic corium simulants revealed that strong steam explosions may develop spontaneously also in stratified melt-coolant configurations, where with high temperature melts and subcooled water conditions a considerable melt-coolant premixed layer is formed. In the article, the performed study of steam explosions in a stratified melt-coolant configuration in PULiMS like conditions is presented. The goal of this analytical work is to supplement the experimental activities within the PULiMS research program by addressing the key questions, especially regarding the explosivity of the formed premixed layer and the mechanisms responsible for the melt-water mixing. To

  9. Study on severe fuel damage and in-vessel melt progression

    International Nuclear Information System (INIS)

    Kim, Hee Dong; Kim, Sang Baik; Lee, Gyu Jung

    1992-06-01

    In-vessel core melt progression describes the progression of the state of a reactor core from core uncovery up to reactor vessel melt through in uncovered accidents or through temperature stabilization in accidents recovered by core reflooding. Melt progression can be thought as two parts; early melt progression and late melt progression. Early phase of core melt progression includes the progression of core material melting and relocation, which mostly consist of metallic materials. On the other hand, the late phase of core melt progression involves ceramic material melt and relocation to the lower plenum and heat-up the reactor vessel lower head. A large number of information are available for the early melt progression through experiments such as SFD, DF, FLHT test and utilized in the severe accident analysis codes. However, understanding of the late phase melt progression phenomenology is based primary on TMI-2 core examinations and not much experimental information is available. Especilally, the great uncertainties exist in vessel failure mode, melt composition, mass, and temperature. Further research is planned to perform to reduce the uncertainties in understanding of core melt down accidents as parts of long term melt progression research program. A study on the core melt progression at KAERI has been being performed through the Severe Accident Research Program with USNRC. KAERI staff had participated in the PBF SFD experiments at INEL and analyses of experiments were performed using SCDAP code. Experiments of core melt program have not been carried out at KAERI yet. It is planned that further research on core melt down accidents will be performed, which is related to design of future generations of nuclear reactors as parts of long-term project for improvement of nuclear reactor safety. (Author)

  10. Clinical and radiological outcome of craniocervical osteo-dural decompression for Chiari I-associated syringomyelia.

    Science.gov (United States)

    Spena, Giannantonio; Bernucci, Claudio; Garbossa, Diego; Valfrè, Walter; Versari, Pietro

    2010-07-01

    The aim of this study was to analyze the long-term clinical and radiological outcomes of craniocervical decompression for patients affected by Chiari I-related syringomyelia. We performed a retrospective analysis of a group of patients affected by Chiari I-associated syringomyelia treated by craniocervical decompression (CCD). Surgical and technical aspects and preoperative factors predicting outcome were discussed. A total of 36 patients were reviewed. There were 17 men and 19 women (female/male ratio 1.11), and the mean age was 40.4 (range 18-68). The most important preoperative symptoms were related to myelopathy (pain, weakness, atrophy, spasticity, sensory loss, and dysesthesias). Most syrinxes were in the cervico-thoracic region (61.1%), and the majority of patients had tonsillar descent between the foramen magnum and C1. All patients underwent a craniectomy less than 3 cm in diameter followed by a duroplasty with dura substitute. No arachnoid manipulation was necessary. Three patients (8.1%) experienced cerebrospinal fluid leaks that resolved without complications. At a mean follow up of 40 months (range 16-72) 80.5% of patients exhibited improvement over their preoperative neurological examination while 11.1% stabilized. The syrinx shrank in 80.5% of patients. Chi-square test showed that preoperative syrinx extension and degree of tonsillar descent did not correlate with clinical and neuroradiological postoperative evolution. Treating syringomyelia associated in Chiari I malformation with CCD leads to a large percentage of patients with satisfying results and no irreversible complications.

  11. Melt electrospinning of biodegradable polyurethane scaffolds

    Science.gov (United States)

    Karchin, Ari; Simonovsky, Felix I.; Ratner, Buddy D.; Sanders, Joan E.

    2014-01-01

    Electrospinning from the melt, in contrast to from solution, is an attractive tissue engineering scaffold manufacturing process as it allows for the formation of small diameter fibers while eliminating potentially cytotoxic solvents. Despite this, there is a dearth of literature on scaffold formation via melt electrospinning. This is likely due to the technical challenges related to the need for a well-controlled high temperature setup and the difficulty in developing an appropriate polymer. In this paper, a biodegradable and thermally stable polyurethane (PU) is described specifically for use in melt electrospinning. Polymer formulations of aliphatic PUs based on (CH2)4-content diisocyanates, polycaprolactone (PCL), 1,4-butanediamine and 1,4-butanediol (BD) were evaluated for utility in the melt electrospinning process. The final polymer formulation, a catalyst-purified PU based on 1,4-butane diisocyanate, PCL and BD in a 4/1/3 molar ratio with a weight-average molecular weight of about 40 kDa, yielded a nontoxic polymer that could be readily electrospun from the melt. Scaffolds electrospun from this polymer contained point bonds between fibers and mechanical properties analogous to many in vivo soft tissues. PMID:21640853

  12. Shallow Melt Apparatus for Semicontinuous Czochralski Crystal Growth

    Science.gov (United States)

    Wang, T.; Ciszek, T. F.

    2006-01-10

    In a single crystal pulling apparatus for providing a Czochralski crystal growth process, the improvement of a shallow melt crucible (20) to eliminate the necessity supplying a large quantity of feed stock materials that had to be preloaded in a deep crucible to grow a large ingot, comprising a gas tight container a crucible with a deepened periphery (25) to prevent snapping of a shallow melt and reduce turbulent melt convection; source supply means for adding source material to the semiconductor melt; a double barrier (23) to minimize heat transfer between the deepened periphery (25) and the shallow melt in the growth compartment; offset holes (24) in the double barrier (23) to increase melt travel length between the deepened periphery (25) and the shallow growth compartment; and the interface heater/heat sink (22) to control the interface shape and crystal growth rate.

  13. Surgical outcome of posterior decompression, posterolateral fusion and stabilization by pedicle screw and rod in thoracolumbar tuberculosis

    Directory of Open Access Journals (Sweden)

    Md. Anowarul Islam

    2017-05-01

    Full Text Available Spinal tuberculosis causes severe complications like neurological and spinal deformity which may lead to respiratory distress, costo-pelvic impingement, paraplegia and consequent reduction in the quality and longevity of life. The aim of the present treatment is to avoid the consequence of neural complications and gain near-normal spine. Mechanical factor causes pathological fracture or dislocation of an affected vertebral body. Surgical decompression ensues further instability. Reconstruction of spinal column by pedicle screw and rod provide stability and prevents secondary neural damage and deformity thereby helps in early mobilization. Prospective study was done to evaluate the results in 20 cases of spinal tuberculosis in thoracolumbar region associated with neurological deficit. We operated our cases (12 males and 8 females by posterolateral decompression, fusion and stabilization by pedicle screw and rod along with antitubercular drug treatment. All patients were with neurological deficit, single level involvement and 10 to 30 degree of mild kyphosis. After surgery, kyphosis improved from 20.7 ± 5.5 degrees to 12.5 ± 3.9 degree. Bony fusion was in 65.0% cases. Neurological improvement and pain subsided in all the patients.

  14. Depth and degree of melting of komatiites

    Science.gov (United States)

    Herzberg, Claude

    1992-04-01

    High pressure melting experiments have permitted new constraints to be placed on the depth and degree of partial melting of komatiites. Komatiites from Gorgona Island were formed by relatively low degrees of pseudoinvariant melting involving L + Ol + Opx + Cpx + Gt on the solidus at 40 kbar, about 130 km depth. Munro-type komatiites were separated from a harzburgite residue (L + Ol + Opx) at pressures that were poorly constrained, but were probably around 50 kbar, about 165 km depth; the degree of partial melting was less than 40 percent. Secular variations in the geochemistry of komatiites could have formed in response to a reduction in the temperature and pressure of melting with time. The 3.5 Ga Barberton komatiites and the 2.7 Ga Munro-type komatiities could have formed in plumes that were hotter than the present-day mantle by 500 deg and 300 deg, respectively. When excess temperatures are this size, melting is deeper and volcanism changes from basaltic to momatiitic. The komatiities from Gorgona Island, which are Mesozoic in age, may be representative of komatiities that are predicted to occur in oceanic plateaus of Cretaceous age throughout the Pacific (Storey et al., 1991).

  15. Transient fuel melting

    International Nuclear Information System (INIS)

    Roche, L.; Schmitz, F.

    1982-10-01

    The observation of micrographic documents from fuel after a CABRI test leads to postulate a specific mode of transient fuel melting during a rapid nuclear power excursion. When reaching the melt threshold, the bands which are characteristic for the solid state are broken statistically over a macroscopic region. The time of maintaining the fuel at the critical enthalpy level between solid and liquid is too short to lead to a phase separation. A significant life-time (approximately 1 second) of this intermediate ''unsolide'' state would have consequences on the variation of physical properties linked to the phase transition solid/liquid: viscosity, specific volume and (for the irradiated fuel) fission gas release [fr

  16. Nanotexturing of surfaces to reduce melting point.

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Ernest J.; Zubia, David (University of Texas at El Paso El Paso, TX); Mireles, Jose (Universidad Aut%C3%94onoma de Ciudad Ju%C3%94arez Ciudad Ju%C3%94arez, Mexico); Marquez, Noel (University of Texas at El Paso El Paso, TX); Quinones, Stella (University of Texas at El Paso El Paso, TX)

    2011-11-01

    This investigation examined the use of nano-patterned structures on Silicon-on-Insulator (SOI) material to reduce the bulk material melting point (1414 C). It has been found that sharp-tipped and other similar structures have a propensity to move to the lower energy states of spherical structures and as a result exhibit lower melting points than the bulk material. Such a reduction of the melting point would offer a number of interesting opportunities for bonding in microsystems packaging applications. Nano patterning process capabilities were developed to create the required structures for the investigation. One of the technical challenges of the project was understanding and creating the specialized conditions required to observe the melting and reshaping phenomena. Through systematic experimentation and review of the literature these conditions were determined and used to conduct phase change experiments. Melting temperatures as low as 1030 C were observed.

  17. Mechanical properties of melt-derived erbium oxide

    International Nuclear Information System (INIS)

    Neuman, A.D.; Blacic, M.J.; Platero, M.; Romero, R.S.; McClellan, K.J.; Petrovic, J.J.

    1998-01-01

    Erbium oxide (Er 2 O 3 ) is a rare earth oxide that is chemically and thermally stable and has a melting point of 2,430 C. There is relatively little information available regarding single crystal growth of erbia or the properties of erbia. In this study, erbia single crystals have been grown in a Xenon Optical Floating Zone Unit (XeOFZ) capable of melting materials at temperatures up to 3,000 C. Erbia was melt synthesized in the XeOFZ unit in a container less fashion, proving for little chance of contamination. Crystals were grown in compressed air and in reducing atmospheres. A recurring problem with melt synthesis of erbia is the appearance of flakes at the edges of the melt zone during growth; these flakes disrupt the growth process. The processing details and an initial survey of the physical properties of erbia single crystals is discussed

  18. Core melt retention and cooling concept of the ERP

    Energy Technology Data Exchange (ETDEWEB)

    Weisshaeupl, H [SIEMENS/KWU, Erlangen (Germany); Yvon, M [Nuclear Power International, Paris (France)

    1996-12-01

    For the French/German European Pressurized Water Reactor (EPR) mitigative measures to cope with the event of a severe accident with core melt down are considered already at the design stage. Following the course of a postulated severe accident with reactor pressure vessel melt through one of the most important features of a future design must be to stabilize and cool the melt within the containment by dedicated measures. This measures should - as far as possible - be passive. One very promising solution for core melt retention seems to be a large enough spreading of the melt on a high temperature resistant protection layer with water cooling from above. This is the favorite concept for the EPR. In dealing with the retention of a molten core outside of the RPV several ``steps`` from leaving the RPV to finally stabilize the melt have to gone through. These steps are: collection of the melt; transfer of the melt; distribution of the melt; confining; cooling and stabilization. The technical features for the EPR solution of a large spreading of the melt are: Dedicated spreading chamber outside the reactor pit (area about 150 m{sup 2}); high temperature resistant protection layers (e.g. Zirconia bricks) at the bottom and part of the lateral structures (thus avoiding melt concrete interaction); reactor pit and spreading compartment are connected via a discharge channel which has a slope to the spreading area and is closed by a steel plate, which will resist the core melt for a certain time in order to allow a collection of the melt; the spreading compartments is connected with the In-Containment Refuelling Water Storage Tank (IRWST) with pipes for water flooding after spreading. These pipes are closed and will only be opened by the hot melt itself. It is shown how the course of the different steps mentioned above is processed and how each of these steps is automatically and passively achieved. (Abstract Truncated)

  19. The Melting Curve and Premelting of MgO

    OpenAIRE

    Cohen, R. E.; Weitz, J. S.

    1996-01-01

    The melting curve for MgO was obtained using molecular dynamics and a non-empirical, many-body potential. We also studied premelting effects by computing the dynamical structure factor in the crystal on approach to melting. The melting curve simulations were performed with periodic boundary conditions with cells up to 512 atoms using the ab-initio Variational Induced Breathing (VIB) model. The melting curve was obtained by computing $% \\Delta H_m$ and $\\Delta V_m$ and integrating the Clapeyro...

  20. Application of the zone-melting technique to metal chelate systems-VI A new apparatus for zone-melting chromatography.

    Science.gov (United States)

    Maeda, S; Kobayashi, H; Ueno, K

    1973-07-01

    An improved apparatus has been constructed for zone-melting chromatography. An essential feature of the apparatus is that the length of the molten zone can be kept constant during a zone-melting operation, by employing heating and cooling compartments which are separated from each other by double partition plates. Each compartment is heated or cooled with jets of hot or cold air. The apparatus is suitable for organic materials melting in the range between 40 degrees and 180 degrees . The distribution of metal ion along the column after zone melting of copper acetylacetonate in 2-methoxynaphthalene was a smooth curve. The plot of the position of maximum concentration, x(max), against the number of zone passes, n, gave a relationship in accordance with theoretical prediction.

  1. Microvascular decompression in treating cranial nerve diseases%微血管减压术治疗颅神经疾病疗效分析

    Institute of Scientific and Technical Information of China (English)

    张志强; 黄涛; 罗小川; 谢才军; 谢绍盈; 沈有碧; 隋立森; 韩富

    2008-01-01

    Objective To study the efficacy of microvascular decompression in treating cranial nerve diseases. Methods 156 patients were treated with microvaseular decompression,of whom 119 were with trigeminal neuralgia,34 with hemifacial spasm and three with glossopharyngeal neuralgia.Rusults The overall effective rate was 96.8%(151/156) and the corresponding effective rate for the above three conditions were 94.2%,97.1% and 66.7%. Conlusions Mierovaseular decompression iS an effective treatment for cranial nerve diseases.%目的 探讨微血管减压术治疗三叉神经痛、面肌痉挛、舌咽神经痛的疗效. 方法 微血管减压手术治疗颅神经疾病156例(三叉神经痛119例,面肌痉挛34例,舌咽神经痛3例). 结果 总有效151例,有效率96.8%,其中三又神经痛、面肌痉挛和舌咽神经痛患者手术有效率分别为94.2%、97.1%和66.7%. 结论 微血管减压术治疗颅神经疾病疗效确切.

  2. Industrial opportunities of controlled melt flow during glass melting, part 1: Melt flow evaluation

    Czech Academy of Sciences Publication Activity Database

    Dyrčíková, Petra; Hrbek, Lukáš; Němec, Lubomír

    2014-01-01

    Roč. 58, č. 2 (2014), s. 111-117 ISSN 0862-5468 R&D Projects: GA TA ČR TA01010844 Institutional support: RVO:67985891 Keywords : glass melting * controlled flow * space utilization Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 0.435, year: 2014 http://www.ceramics-silikaty.cz/2014/pdf/2014_02_111.pdf

  3. Elongational viscosity of monodisperse and bidisperse polystyrene melts

    DEFF Research Database (Denmark)

    Nielsen, Jens Kromann; Rasmussen, Henrik K.; Hassager, Ole

    2006-01-01

    The start-up and steady uniaxial elongational viscosity have been measured for two monodisperse polystyrene melts with molecular weights of 52 and 103 kg/mole, and for three bidisperse polystyrene melts. The monodisperse melts show a maximum in the steady elongational viscosity vs. the elongational...

  4. Modeling of evaporation processes in glass melting furnaces

    NARCIS (Netherlands)

    Limpt, van J.A.C.

    2007-01-01

    The majority of glass furnaces worldwide, apply fossil fuel combustion to transfer heat directly by radiation from the combustion processes to the melting batch and glass melt. During these high temperature melting processes, some glass components, such as: sodium, potassium, boron and lead species

  5. Melting behavior of SnI4 reexamined

    Science.gov (United States)

    Fuchizaki, Kazuhiro

    2013-12-01

    The low-pressure crystalline phase of a molecular crystal, SnI4, has a rising melting curve that breaks abruptly at around 1.5 GPa, beyond which it becomes almost flat, with a slight maximum at about 3 GPa. Although the overall aspect of this melting curve can be captured by the Kumari-Dass-Kechin equation, the values for the parameters involved in the equation were definitely different from those predicted on the basis of the Clapeyron-Clausius relationship. On the other hand, the accuracy of our experimental data prevented us from judging whether the parameters are derivable from the Lindemann melting law, as shown independently by Kumari and Dass, and by Kechin. The Kraut-Kennedy and Magalinskii-Zubov relationships seem to be valid in the low-pressure region where the melting curve is rising. The breakdown of these relationships suggests a qualitative change in the intermolecular interaction upon compression, thereby making the melting behavior unusual.

  6. Multiscale Models of Melting Arctic Sea Ice

    Science.gov (United States)

    2014-09-30

    Sea ice reflectance or albedo , a key parameter in climate modeling, is primarily determined by melt pond and ice floe configurations. Ice - albedo ...determine their albedo - a key parameter in climate modeling. Here we explore the possibility of a conceptual sea ice climate model passing through a...bifurcation points. Ising model for melt ponds on Arctic sea ice Y. Ma, I. Sudakov, and K. M. Golden Abstract: The albedo of melting

  7. Basal melting driven by turbulent thermal convection

    Science.gov (United States)

    Rabbanipour Esfahani, Babak; Hirata, Silvia C.; Berti, Stefano; Calzavarini, Enrico

    2018-05-01

    Melting and, conversely, solidification processes in the presence of convection are key to many geophysical problems. An essential question related to these phenomena concerns the estimation of the (time-evolving) melting rate, which is tightly connected to the turbulent convective dynamics in the bulk of the melt fluid and the heat transfer at the liquid-solid interface. In this work, we consider a convective-melting model, constructed as a generalization of the Rayleigh-Bénard system, accounting for the basal melting of a solid. As the change of phase proceeds, a fluid layer grows at the heated bottom of the system and eventually reaches a turbulent convection state. By means of extensive lattice-Boltzmann numerical simulations employing an enthalpy formulation of the governing equations, we explore the model dynamics in two- and three-dimensional configurations. The focus of the analysis is on the scaling of global quantities like the heat flux and the kinetic energy with the Rayleigh number, as well as on the interface morphology and the effects of space dimensionality. Independently of dimensionality, we find that the convective-melting system behavior shares strong resemblances with that of the Rayleigh-Bénard one, and that the heat flux is only weakly enhanced with respect to that case. Such similarities are understood, at least to some extent, considering the resulting slow motion of the melting front (with respect to the turbulent fluid velocity fluctuations) and its generally little roughness (compared to the height of the fluid layer). Varying the Stefan number, accounting for the thermodynamical properties of the material, also seems to have only a mild effect, which implies the possibility of extrapolating results in numerically delicate low-Stefan setups from more convenient high-Stefan ones. Finally, we discuss the implications of our findings for the geophysically relevant problem of modeling Arctic ice melt ponds.

  8. Bayesian estimation of core-melt probability

    International Nuclear Information System (INIS)

    Lewis, H.W.

    1984-01-01

    A very simple application of the canonical Bayesian algorithm is made to the problem of estimation of the probability of core melt in a commercial power reactor. An approximation to the results of the Rasmussen study on reactor safety is used as the prior distribution, and the observation that there has been no core melt yet is used as the single experiment. The result is a substantial decrease in the mean probability of core melt--factors of 2 to 4 for reasonable choices of parameters. The purpose is to illustrate the procedure, not to argue for the decrease

  9. Management of non-traumatic avascular necrosis of the femoral head-a comparative analysis of the outcome of multiple small diameter drilling and core decompression with fibular grafting.

    Science.gov (United States)

    Mohanty, S P; Singh, K A; Kundangar, R; Shankar, V

    2017-04-01

    The purpose of this study was to compare the clinical and radiological outcomes of multiple small diameter drilling and core decompression with fibular strut grafting in the management of non-traumatic avascular necrosis (AVN) of the femoral head. Outcomes of patients with AVN treated by multiple small diameter drilling (group 1) were compared retrospectively with patients treated by core decompression and fibular grafting (group 2). Harris hip score (HHS) was used to assess the clinical status pre- and postoperatively. Modified Ficat and Arlet classification was used to assess the radiological stage pre- and postoperatively. Forty-six patients (68 hips) were included in this study. Group 1 consisted of 33 hips, and group 2 consisted of 35 hips. In stages I and IIB, there was no statistically significant difference in the final HHS between the two groups. However, in stages IIA and III, hips in group 2 had a better final HHS (P < 0.05). In terms of radiographic progression, there was no statistical difference between hips in stages I, IIA and stage IIB. However, in stage III, hips belonging to group 2 had better results (P < 0.05). Kaplan-Meier survivorship analysis showed better outcome in group 2 in stage III (P < 0.05). Hips with AVN in the precollapse stage can be salvaged by core decompression with or without fibular grafting. Multiple small diameter drilling is relatively simple and carries less morbidity and hence preferred in stages I and II. However, in stage III disease, core decompression with fibular strut grafting gives better results.

  10. Microstructures define melting of molybdenum at high pressures

    Science.gov (United States)

    Hrubiak, Rostislav; Meng, Yue; Shen, Guoyin

    2017-03-01

    High-pressure melting anchors the phase diagram of a material, revealing the effect of pressure on the breakdown of the ordering of atoms in the solid. An important case is molybdenum, which has long been speculated to undergo an exceptionally steep increase in melting temperature when compressed. On the other hand, previous experiments showed nearly constant melting temperature as a function of pressure, in large discrepancy with theoretical expectations. Here we report a high-slope melting curve in molybdenum by synchrotron X-ray diffraction analysis of crystalline microstructures, generated by heating and subsequently rapidly quenching samples in a laser-heated diamond anvil cell. Distinct microstructural changes, observed at pressures up to 130 gigapascals, appear exclusively after melting, thus offering a reliable melting criterion. In addition, our study reveals a previously unsuspected transition in molybdenum at high pressure and high temperature, which yields highly textured body-centred cubic nanograins above a transition temperature.

  11. A new improved method for assessing brain deformation after decompressive craniectomy.

    Directory of Open Access Journals (Sweden)

    Tim L Fletcher

    Full Text Available Decompressive craniectomy (DC is a surgical intervention used following traumatic brain injury to prevent or alleviate raised intracranial pressure. However the clinical effectiveness of the intervention remains in doubt. The location of the craniectomy (unilateral or bifrontal might be expected to change the brain deformation associated with the operation and hence the clinical outcome. As existing methods for assessing brain deformation have several limitations, we sought to develop and validate a new improved method.Computed tomography (CT scans were taken from 27 patients who underwent DC (17 bifrontal patients and 10 unilateral patients. Pre-operative and post-operative images were processed and registered to determine the change in brain position associated with the operation. The maximum deformation in the herniated brain, the change in volume and estimates of the craniectomy area were determined from the images. Statistical comparison was made using the Pearson's correlation coefficient r and a Welch's two-tailed T-test, with statistical significance reported at the 5% level.There was a reasonable correlation between the volume increase and the maximum brain displacement (r = 0.64, a low correlation between the volume increase and the craniectomy area (r = 0.30 and no correlation between the maximum displacement and the craniectomy area (r = -0.01. The maximum deformation was significantly lower (P  = 0.023 in the bifrontal patients (mean = 22.5 mm compared with the unilateral patients (mean = 29.8 mm. Herniation volume was significantly lower (P = 0.023 in bifrontal (mean = 50.0 ml than unilateral patients (mean = 107.3 ml. Craniectomy area was not significantly different for the two craniectomy locations (P = 0.29.A method has been developed to quantify changes in brain deformation due to decompressive craniectomy from CT images and allow comparison between different craniectomy locations

  12. Pavement Snow Melting

    Energy Technology Data Exchange (ETDEWEB)

    Lund, John W.

    2005-01-01

    The design of pavement snow melting systems is presented based on criteria established by ASHRAE. The heating requirements depends on rate of snow fall, air temperature, relative humidity and wind velocity. Piping materials are either metal or plastic, however, due to corrosion problems, cross-linked polyethylene pipe is now generally used instead of iron. Geothermal energy is supplied to systems through the use of heat pipes, directly from circulating pipes, through a heat exchanger or by allowing water to flow directly over the pavement, by using solar thermal storage. Examples of systems in New Jersey, Wyoming, Virginia, Japan, Argentina, Switzerland and Oregon are presented. Key words: pavement snow melting, geothermal heating, heat pipes, solar storage, Wyoming, Virginia, Japan, Argentina, Klamath Falls.

  13. Dysprosium-free melt-spun permanent magnets

    International Nuclear Information System (INIS)

    Brown, D N; Wu, Z; He, F; Miller, D J; Herchenroeder, J W

    2014-01-01

    Melt-spun NdFeB powders can be formed into a number of different types of permanent magnet for a variety of applications in electronics, automotive and clean technology industries. The melt-spinning process produces flake powder with a fine uniform array of nanoscale Nd 2 Fe 14 B grains. These powders can be net-shape formed into isotropic polymer-bonded magnets or hot formed into fully dense magnets. This paper discusses the influence of heavy rare earth elements and microstructure on the magnetic performance, thermal stability and material cost of NdFeB magnets. Evidence indicates that melt-spun nanocrystalline NdFeB magnets are less dependent on heavy rare earth elements for high-temperature performance than the alternative coarser-grained sintered NdFeB magnets. In particular, hot-pressed melt-spun magnets are an attractive low-cost solution for applications that require thermal stability up to 175–200 °C. (paper)

  14. Dysprosium-free melt-spun permanent magnets.

    Science.gov (United States)

    Brown, D N; Wu, Z; He, F; Miller, D J; Herchenroeder, J W

    2014-02-12

    Melt-spun NdFeB powders can be formed into a number of different types of permanent magnet for a variety of applications in electronics, automotive and clean technology industries. The melt-spinning process produces flake powder with a fine uniform array of nanoscale Nd2Fe14B grains. These powders can be net-shape formed into isotropic polymer-bonded magnets or hot formed into fully dense magnets. This paper discusses the influence of heavy rare earth elements and microstructure on the magnetic performance, thermal stability and material cost of NdFeB magnets. Evidence indicates that melt-spun nanocrystalline NdFeB magnets are less dependent on heavy rare earth elements for high-temperature performance than the alternative coarser-grained sintered NdFeB magnets. In particular, hot-pressed melt-spun magnets are an attractive low-cost solution for applications that require thermal stability up to 175-200 °C.

  15. Needleless Melt-Electrospinning of Polypropylene Nanofibres

    Directory of Open Access Journals (Sweden)

    Jian Fang

    2012-01-01

    Full Text Available Polypropylene (PP nanofibres have been electrospun from molten PP using a needleless melt-electrospinning setup containing a rotary metal disc spinneret. The influence of the disc spinneret (e.g., disc material and diameter, operating parameters (e.g., applied voltage, spinning distance, and a cationic surfactant on the fibre formation and average fibre diameter were examined. It was shown that the metal material used for making the disc spinneret had a significant effect on the fibre formation. Although the applied voltage had little effect on the fibre diameter, the spinning distance affected the fibre diameter considerably, with shorter spinning distance resulting in finer fibres. When a small amount of cationic surfactant (dodecyl trimethyl ammonium bromide was added to the PP melt for melt-electrospinning, the fibre diameter was reduced considerably. The finest fibres produced from this system were 400±290 nm. This novel melt-electrospinning setup may provide a continuous and efficient method to produce PP nanofibres.

  16. [The "window" surgical exposure strategy of the upper anterior cervical retropharyngeal approach for anterior decompression at upper cervical spine].

    Science.gov (United States)

    Wu, Xiang-Yang; Zhang, Zhe; Wu, Jian; Lü, Jun; Gu, Xiao-Hui

    2009-11-01

    To investigate the "window" surgical exposure strategy of the upper anterior cervical retropharyngeal approach for the exposure and decompression and instrumentation of the upper cervical spine. From Jan. 2000 to July 2008, 5 patients with upper cervical spinal injuries were treated by surgical operation included 4 males and 1 female with and average age of 35 years old ranging from 16 to 68 years. There were 2 cases of Hangman's fractures (type II ), 2 of C2.3 intervertebral disc displacement and 1 of C2 vertebral body tuberculosis. All patients underwent the upper cervical anterior retropharyngeal approach through the "window" between the hypoglossal nerve and the superior laryngeal nerve and pharynx and carotid artery. Two patients of Hangman's fractures underwent the C2,3 intervertebral disc discectomy, bone graft fusion and internal fixation. Two patients of C2,3 intervertebral disc displacement underwent the C2,3 intervertebral disc discectomy, decompression bone graft fusion and internal fixation. One patient of C2 vertebral body tuberculosis was dissected and resected and the focus and the cavity was filled by bone autografting. C1 anterior arch to C3 anterior vertebral body were successful exposed. Lesion resection or decompression and fusion were successful in all patients. All patients were followed-up for from 5 to 26 months (means 13.5 months). There was no important vascular and nerve injury and no wound infection. Neutral symptoms was improved and all patient got successful fusion. The "window" surgical exposure surgical technique of the upper cervical anterior retropharyngeal approach is a favorable strategy. This approach strategy can be performed with full exposure for C1-C3 anterior anatomical structure, and can get minimally invasive surgery results and few and far between wound complication, that is safe if corresponding experience is achieved.

  17. Effectiveness of early decompressive surgery for massive hemispheric embolic infarction

    International Nuclear Information System (INIS)

    Osada, Hideo; Mori, Kentaro; Yamamoto, Takuji; Nakao, Yasuaki; Oyama, Kazutaka; Esaki, Takanori; Watanabe, Mitsuya

    2008-01-01

    Massive hemispheric embolic infarction associated with acute brain swelling and rapid clinical deterioration is known as malignant infarction because of the significant rates of mortality and morbidity. Decompressive hemicraniectomy is effective; however, the timing and outcome still remain unclear. Ninety-four patients with massive embolic hemispheric infarctions (infarct volume >200 ml) were retrospectively divided into 3 groups: 29 patients, treated conservatively (conservative group); 33 patients, operated on after the appearance of signs of brain herniation (late surgery group); and 32 patients, operated on before the onset of signs of brain herniation signs (early surgery group). The mortality at 1 and 6 months in the late surgery group (15.2% and 24.2%, respectively) was significantly improved as compared to the conservative group (62.1% and 69.0%, respectively) (p 200 ml) should be performed before the onset of brain herniation. Early surgery may achieve a satisfactory functional recovery. (author)

  18. Applications of nonequilibrium melting concept to damage-accumulation processes

    International Nuclear Information System (INIS)

    Lam, N.Q.; Okamoto, P.R.

    1998-01-01

    The authors recent study of crystalline-to-amorphous transformation led to the successful development of a unified thermodynamic description of disorder-induced amorphization and heat-induced melting, based on a generalized version of the Lindemann melting criterion. The generalized criterion requires that the melting temperature of a defective crystal decreases with increasing static atomic disorder. Hence, any crystal can melt at temperatures below the melting point of its perfect crystalline state when driven far from equilibrium by introducing critical amounts of misfitting solute atoms and lattice imperfections, radiation damage, and/or tensile stresses. This conceptual approach to nonequilibrium melting provides new insight into long-standing materials problems such as brittle fracture, embrittlement, and environmentally-induced cracking, for example irradiation-assisted stress corrosion cracking

  19. Finite size melting of spherical solid-liquid aluminium interfaces

    DEFF Research Database (Denmark)

    Chang, J.; Johnson, Erik; Sakai, T.

    2009-01-01

    We have investigated the melting of nano-sized cone shaped aluminium needles coated with amorphous carbon using transmission electron microscopy. The interface between solid and liquid aluminium was found to have spherical topology. For needles with fixed apex angle, the depressed melting tempera...... to the conclusion that the depressed melting temperature is not controlled solely by the inverse radius 1/R. Instead, we found a direct relation between the depressed melting temperature and the ratio between the solid-liquid interface area and the molten volume.......We have investigated the melting of nano-sized cone shaped aluminium needles coated with amorphous carbon using transmission electron microscopy. The interface between solid and liquid aluminium was found to have spherical topology. For needles with fixed apex angle, the depressed melting...

  20. Theoretical study of a melting curve for tin

    International Nuclear Information System (INIS)

    Feng, Xi; Ling-Cang, Cai

    2009-01-01

    The melting curve of Sn has been calculated using the dislocation-mediated melting model with the 'zone-linking method'. The results are in good agreement with the experimental data. According to our calculation, the melting temperature of γ-Sn at zero pressure is about 436 K obtained by the extrapolation of the method from the triple point of Sn. The results show that this calculation method is better than other theoretical methods for predicting the melting curve of polymorphic material Sn. (condensed matter: structure, thermal and mechanical properties)

  1. Experiments on melt droplets falling into a water pool

    Energy Technology Data Exchange (ETDEWEB)

    Okkonen, T.; Sehgal, B.R. [Royal Inst. of Tech., Stockholm (Sweden). Div. of Nuclear Power Safety

    1998-01-01

    This paper presents experimental data and analysis related to melt droplets falling into a water pool. A binary CaO-B{sub 2}O{sub 3} melt mixture is used to study the influence of melt superheat and water subcooling on droplet deformation and fragmentation. For the conditions studied (We {<=} 1000), the surface tension of the melt droplet and the film boiling stability greatly affect the fragmentation behaviour. If the melt temperature is between the liquidus and solidus point (mushy zone) or if the film boiling is stable due to a relatively low subcooling, the droplet deformation and fragmentation are mitigated. This behaviour can be related to the effective Weber number (We) of the melt droplet upon entry into the water pool. Similar phenomena can be expected also for interactions of corium (UO{sub 2}-ZrO{sub 2}) and water, which are characterized by a potentially fast transformation of melt into the mushy zone and by particularly stable film boiling. (author)

  2. Melting temperature of uranium - plutonium mixed oxide fuel

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, Tetsuya; Hirosawa, Takashi [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

    1997-08-01

    Fuel melting temperature is one of the major thermodynamical properties that is used for determining the design criteria on fuel temperature during irradiation in FBR. In general, it is necessary to evaluate the correlation of fuel melting temperature to confirm that the fuel temperature must be kept below the fuel melting temperature during irradiation at any conditions. The correlations of the melting temperature of uranium-plutonium mixed oxide (MOX) fuel, typical FBR fuel, used to be estimated and formulized based on the measured values reported in 1960`s and has been applied to the design. At present, some experiments have been accumulated with improved experimental techniques. And it reveals that the recent measured melting temperatures does not agree well to the data reported in 1960`s and that some of the 1960`s data should be modified by taking into account of the recent measurements. In this study, the experience of melting temperature up to now are summarized and evaluated in order to make the fuel pin design more reliable. The effect of plutonium content, oxygen to metal ratio and burnup on MOX fuel melting was examined based on the recent data under the UO{sub 2} - PuO{sub 2} - PuO{sub 1.61} ideal solution model, and then formulized. (J.P.N.)

  3. Melting temperature of uranium - plutonium mixed oxide fuel

    International Nuclear Information System (INIS)

    Ishii, Tetsuya; Hirosawa, Takashi

    1997-08-01

    Fuel melting temperature is one of the major thermodynamical properties that is used for determining the design criteria on fuel temperature during irradiation in FBR. In general, it is necessary to evaluate the correlation of fuel melting temperature to confirm that the fuel temperature must be kept below the fuel melting temperature during irradiation at any conditions. The correlations of the melting temperature of uranium-plutonium mixed oxide (MOX) fuel, typical FBR fuel, used to be estimated and formulized based on the measured values reported in 1960's and has been applied to the design. At present, some experiments have been accumulated with improved experimental techniques. And it reveals that the recent measured melting temperatures does not agree well to the data reported in 1960's and that some of the 1960's data should be modified by taking into account of the recent measurements. In this study, the experience of melting temperature up to now are summarized and evaluated in order to make the fuel pin design more reliable. The effect of plutonium content, oxygen to metal ratio and burnup on MOX fuel melting was examined based on the recent data under the UO 2 - PuO 2 - PuO 1.61 ideal solution model, and then formulized. (J.P.N.)

  4. Evaluation of methods for characterizing the melting curves of a high temperature cobalt-carbon fixed point to define and determine its melting temperature

    Science.gov (United States)

    Lowe, David; Machin, Graham

    2012-06-01

    The future mise en pratique for the realization of the kelvin will be founded on the melting temperatures of particular metal-carbon eutectic alloys as thermodynamic temperature references. However, at the moment there is no consensus on what should be taken as the melting temperature. An ideal melting or freezing curve should be a completely flat plateau at a specific temperature. Any departure from the ideal is due to shortcomings in the realization and should be accommodated within the uncertainty budget. However, for the proposed alloy-based fixed points, melting takes place over typically some hundreds of millikelvins. Including the entire melting range within the uncertainties would lead to an unnecessarily pessimistic view of the utility of these as reference standards. Therefore, detailed analysis of the shape of the melting curve is needed to give a value associated with some identifiable aspect of the phase transition. A range of approaches are or could be used; some purely practical, determining the point of inflection (POI) of the melting curve, some attempting to extrapolate to the liquidus temperature just at the end of melting, and a method that claims to give the liquidus temperature and an impurity correction based on the analytical Scheil model of solidification that has not previously been applied to eutectic melting. The different methods have been applied to cobalt-carbon melting curves that were obtained under conditions for which the Scheil model might be valid. In the light of the findings of this study it is recommended that the POI continue to be used as a pragmatic measure of temperature but where required a specified limits approach should be used to define and determine the melting temperature.

  5. Melting and Pressure-Induced Amorphization of Quartz

    OpenAIRE

    Badro, James; Gillet, Philippe; Barrat, Jean-Louis

    1997-01-01

    It has recently been shown that amorphization and melting of ice were intimately linked. In this letter, we infer from molecular dynamics simulations on the SiO2 system that the extension of the quartz melting line in the metastable pressure-temperature domain is the pressure-induced amorphization line. It seems therefore likely that melting is the physical phenomenon responsible for pressure induced amorphization. Moreover, we show that the structure of a "pressure glass" is similar to that ...

  6. Application of multicomponent medium model for numerical simulation of reactor element melting and melt relocation under severe accidents

    International Nuclear Information System (INIS)

    Vladimir Ya Kumaev

    2005-01-01

    Full text of publication follows: Numerical simulation of the melting processes is necessary in substantiating the safety of new generation reactors to determine the quantitative characteristics of the melt formed, destruction of reactor vessel and components, melt interaction processes in the melt localization systems (MLS), formation and transport of hydrogen, radioactive aerosols under severe accidents. The results of computations will be applied in developing the procedures for severe accident management and mitigation of its consequences and designing melt localization systems. The report is devoted to the development and application of the two-dimensional and three-dimensional versions of the DINCOR code intended for numerical simulation of the thermal hydraulic processes in a multicomponent medium with solid-liquid phase changes. The basic set of equations of multicomponent medium is presented. The numerical method to solve the governing equations is discussed. Some examples of two-dimensional code applications are presented. The experience of application of the code has shown that joint calculations of hydrodynamics, heat transfer, stratification and chemical interaction enable the process description accuracy to be significantly increased and the number of initial experimental data to be reduced. The multicomponent medium model can be used as the base for the development of a three-dimensional version of the code. At the same time, it was established that the models being used need be further developed. The most important problems are the following: -development of the local mathematical models of liquefaction and solidification of materials under front melting and melting due to the action of internal sources; -development of the model of incompressible components separation; -development of the models of dissolution and chemical interaction of multicomponent medium components. In conclusion possible verification of the computer code is discussed. (author)

  7. Bubble Formation in Basalt-like Melts

    DEFF Research Database (Denmark)

    Jensen, Martin; Keding, Ralf; Yue, Yuanzheng

    2011-01-01

    and their diameter. The variation in melting temperature has little influence on the overall bubble volume. However, the size distribution of the bubbles varies with the melting temperature. When the melt is slowly cooled, the bubble volume increases, implying decreased solubility of the gaseous species. Mass...... spectroscopy analysis of gases liberated during heating of the glass reveals that small bubbles contain predominantly CH4, CO and CO2, whereas large bubbles bear N2, SO2 and H2S. The methodology utilised in this work can, besides mapping the bubbles in a glass, be applied to shed light on the sources of bubble...

  8. Selective Laser Melting of Pure Copper

    Science.gov (United States)

    Ikeshoji, Toshi-Taka; Nakamura, Kazuya; Yonehara, Makiko; Imai, Ken; Kyogoku, Hideki

    2018-03-01

    Appropriate building parameters for selective laser melting of 99.9% pure copper powder were investigated at relatively high laser power of 800 W for hatch pitch in the range from 0.025 mm to 0.12 mm. The highest relative density of the built material was 99.6%, obtained at hatch pitch of 0.10 mm. Building conditions were also studied using transient heat analysis in finite element modeling of the liquidation and solidification of the powder layer. The estimated melt pool length and width were comparable to values obtained by observations using a thermoviewer. The trend for the melt pool width versus the hatch pitch agreed with experimental values.

  9. Disordering and Melting of Aluminum Surfaces

    DEFF Research Database (Denmark)

    Stoltze, Per; Nørskov, Jens Kehlet; Landman, U.

    1988-01-01

    We report on a molecular-dynamics simulation of an Al(110) surface using the effective-medium theory to describe the interatomic interactions. The surface region is found to start melting ≅200 K below the bulk melting temperature with a gradual increase in the thickness of the disordered layer as...

  10. Single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation in surgical treatment for single-segment lumbar spinal tuberculosis.

    Science.gov (United States)

    Zeng, Hao; Wang, Xiyang; Zhang, Penghui; Peng, Wei; Liu, Zheng; Zhang, Yupeng

    2015-01-01

    The aim of this study is to determine the feasibility and efficacy of surgical management of single-segment lumbar spinal tuberculosis (TB) by using single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation. Seventeen cases of single-segment lumbar TB were treated with single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation. The mean follow-up was 36.9 months (range: 24-62 months). The kyphotic angle ranged from 15.2-35.1° preoperatively, with an average measurement of 27.8°. The American Spinal Injury Association (ASIA) score system was used to evaluate the neurological deficits and erythrocyte sedimentation rate (ESR) used to judge the activity of TB. Spinal TB was completely cured in all 17 patients. There was no recurrent TB infection. The postoperative kyphotic angle was 6.6-10.2°, 8.1° in average, and there was no significant loss of the correction at final follow-up. Solid fusion was achieved in all cases. Neurological condition in all patients was improved after surgery. Single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation can be a feasible and effective method the in treatment of single-segment lumbar spinal TB.

  11. Clinical Effects of Novel Nanoscaled Core Decompression Rods Combined with Umbilical Cord Mesenchymal Stem Cells on the Treatment of Early Osteonecrosis of the Femoral Head

    Directory of Open Access Journals (Sweden)

    Hongyang Gao

    2015-01-01

    Full Text Available Osteonecrosis of the femoral head (ONFH is one of the most common diseases in orthopedics. In this study, we investigated the clinical effects of novel nanoscaled core decompression rods combined with mesenchymal stem cells on the treatment of the ONFH. 12 adult patients with early ONFH (at the stage of Ficat II received the treatment using the implantation of novel nanoscaled core decompression rods combined with umbilical cord mesenchymal stem cells. The grade of the patients’ hip was scored by Harris marking system before and after the surgery, and then paired t-test was done. We assessed the curative efficiency based on the change of the patients before and after the surgery. In particular, the survival rate of femoral head was assessed at 12 months after the surgery. The results demonstrated that according to the standard of Harris Scoring, the average grade of hip joint before the surgery was 54.16 ± 4.23 points while average grade of hip joint at 12 months after the surgery was 85.28 ± 3.65 points. So, the implantation of the novel nanoscaled core decompression rods combined with mesenchymal stem cells had satisfactory clinical effects, suggesting that this implantation should be effective to treat early ONFH.

  12. Microvascular decompression of the cochleovestibular nerve for treatment of tinnitus and vertigo : a systematic review and meta-analysis of individual patient data

    NARCIS (Netherlands)

    van den Berge, Minke J C; van Dijk, J. Marc C.; Posthumus, Iris A; Smidt, Nynke; van Dijk, Pim; Free, Rolien H

    OBJECTIVE Microvascular decompression (MVD) is regarded as a valid treatment modality in neurovascular conflicts (NVCs) causing, for example, trigeminal neuralgia and hemifacial spasms. An NVC of the cochleovestibular nerve might cause tinnitus and/or vertigo; however, general acceptance of MVD for

  13. Greenland ice sheet melt from MODIS and associated atmospheric variability.

    Science.gov (United States)

    Häkkinen, Sirpa; Hall, Dorothy K; Shuman, Christopher A; Worthen, Denise L; DiGirolamo, Nicolo E

    2014-03-16

    Daily June-July melt fraction variations over the Greenland ice sheet (GIS) derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) (2000-2013) are associated with atmospheric blocking forming an omega-shape ridge over the GIS at 500 hPa height. Blocking activity with a range of time scales, from synoptic waves breaking poleward (days) to full-fledged blocks (≥5 days), brings warm subtropical air masses over the GIS controlling daily surface temperatures and melt. The temperature anomaly of these subtropical air mass intrusions is also important for melting. Based on the years with the greatest melt (2002 and 2012) during the MODIS era, the area-average temperature anomaly of 2 standard deviations above the 14 year June-July mean results in a melt fraction of 40% or more. Though the summer of 2007 had the most blocking days, atmospheric temperature anomalies were too small to instigate extreme melting. Short-term atmospheric blocking over Greenland contributes to melt episodesAssociated temperature anomalies are equally important for the meltDuration and strength of blocking events contribute to surface melt intensity.

  14. Technological properties and structure of titanate melts

    International Nuclear Information System (INIS)

    Morozov, A.A.

    2002-01-01

    Power substantiation of existence of tough stream of complex anion ([TiO 6 ] 8- ) as a prevalent unit in titanate melts is given on the base of up-to-date knowledge about structure of metallurgical slags and results of investigations of thermophysical properties of these melts. It is shown that high crystallization ability of titanate melts at technological temperatures is determined by heterogeneity of liquid state - by presence up to 30 % of dispersed particles of solid phase solutions in matrix liquid [ru

  15. Observation of melting conditions in selective laser melting of metals (SLM)

    Science.gov (United States)

    Thombansen, U.; Abels, Peter

    2016-03-01

    Process observation in 3D printing of metals currently is one of the central challenges. Many companies strive to employ this additive manufacturing process in their production chains in order to gain competitive advantages through added flexibility in product design and embedded features. The new degrees of freedom are accompanied with the challenge to manufacture every detail of the product to the predefined specifications. Products with filigree internal structures for example require a perfect build to deliver the performance that was designed into these structures. Melting conditions determine properties such as grain structure and density of the finished part before it is sent to post processing steps. Monitoring of such melting conditions is still a challenge where the use of photodiodes, pyrometry and camera systems contribute to an overall picture that might identify errors or deviations during the build process. Additional considerations must be made to decide if these sensors are applied coaxially or from a lateral perspective. Furthermore, setting parameters of focal plane array (FPA) sensors are discussed and events that are seen in the machine vision image are compared against the pyrometry data. The resume of the experiments suggests the application of multiple sensors to the selective laser melting process (SLM) as they jointly contribute to an identification of events. These events need to be understood in order to establish cause effect relationships in the future.

  16. Design of mulitlevel OLF approach ("V"-shaped decompressive laminoplasty) based on 3D printing technology.

    Science.gov (United States)

    Ling, Qinjie; He, Erxing; Ouyang, Hanbin; Guo, Jing; Yin, Zhixun; Huang, Wenhua

    2017-07-27

    To introduce a new surgical approach to the multilevel ossification of the ligamentum flavum (OLF) aided by three-dimensional (3D) printing technology. A multilevel OLF patient (male, 66 years) was scanned using computed tomography (CT). His saved DICOM format data were inputted to the Mimics14.0 3D reconstruction software (Materialise, Belgium). The resulting 3D model was used to observe the anatomical features of the multilevel OLF area and to design the surgical approach. At the base of the spinous process, two channels were created using an osteotomy bilaterally to create a "V" shape to remove the bone ligamentous complex (BLC). The decompressive laminoplasty using mini-plate fixation was simulated with the computer. The physical model was manufactured using 3D printing technology. The patient was subsequently treated using the designed surgery. The operation was completed successfully without any complications. The operative time was 90 min, and blood loss was 200 ml. One month after the operation, neurologic function was recovered well, and the JOA score was improved from 6 preoperatively to 10. Postoperative CT scanning showed that the OLF was totally removed, and the replanted BLC had not subsided. 3D printing technology is an effective, reliable, and minimally invasive method to design operations. The technique can be an option for multilevel OLF surgical treatment. This can provide sufficient decompression with minimum damage to the spine and other intact anatomical structures.

  17. Attenuation in Melting Layer of Precipitation

    NARCIS (Netherlands)

    Klaassen, W.

    1988-01-01

    A model of the melting layer is employed on radar measurements to simulate the attenuation of radio waves at 12, 20 and 30GHz. The attenuation in the melting layer is simulated to be slightly larger than that of rain with the same path length and precipitation intensity. The result appears to depend

  18. Unusual Ventilatory Response to Exercise in Patient with Arnold-Chiari Type 1 Malformation after Posterior Fossa Decompression

    Directory of Open Access Journals (Sweden)

    Keely Smith

    2016-01-01

    Full Text Available We present a case of a 17-year-old Hispanic male with Arnold-Chiari Type 1 [AC-Type 1] with syringomyelia, status post decompression, who complains of exercise intolerance, headaches, and fatigue with exertion. The patient was found to have diurnal hypercapnia and nocturnal alveolar hypoventilation. Cardiopulmonary testing revealed blunting of the ventilatory response to the rise in carbon dioxide (CO2 resulting in failure of the parallel correlation between increased CO2 levels and ventilation; the expected vertical relationship between PETCO2 and minute ventilation during exercise was replaced with an almost horizontal relationship. No new pathology of the brainstem was discovered by MRI or neurological evaluation to explain this phenomenon. The patient was placed on continuous noninvasive open ventilation (NIOV during the day and CPAP at night for a period of 6 months. His pCO2 level decreased to normal limits and his symptoms improved; specifically, he experienced less headaches and fatigue during exercise. In this report, we describe the abnormal response to exercise that patients with AC-Type 1 could potentially experience, even after decompression, characterized by the impairment of ventilator response to hypercapnia during exertion, reflecting a complete loss of chemical influence on breathing with no evidence of abnormality in the corticospinal pathway.

  19. Fission Product Release from Molten Pool: ceramic melt tests

    Energy Technology Data Exchange (ETDEWEB)

    Petrov, Yu.B.; Lopukh, D.B.; Petchenkov, A.Yu. [AO ' NP Sintez' , St. Petersburg (RU)] [and others

    1999-07-01

    Experimental results are presented on the volatilisation of UO{sub 2{+-}}{sub x}, SrO, BaO, CeO{sub 2} from corium melts. Corium melts were generated by high frequency induction melting in a cold crucible. The surface temperature of the melts was in the range from 1753 to 3023 K. Some results of the tests are discussed and a comparison with published data is made. (author)

  20. Habitat Options to Protect Against Decompression Sickness on Mars

    Science.gov (United States)

    Conkin, J.

    2000-07-01

    Men and women are alive today, although perhaps still in diapers, who will explore the surface of Mars. Two achievable goals to enable this exploration are to use Martian resources, and to provide a safe means for unrestricted access to the surface. A cost-effective approach for Mars exploration is to use the available resources, such as water and atmospheric gases. Nitrogen (N2) and Argon (Ar) in a concentration ratio of 1.68/1.0 are available, and could form the inert gas component of a habitat atmosphere at 8.0, 9.0, or 10.0 pounds per square inch absolute (psia). The habitat and space suit must be designed as an integrated, complementary, system: a comfortable living environment about 85% of the time and a safe working environment about 15% of the time. A goal is to provide a system that permits unrestricted exploration of Mars. However the risk of decompression sickness (DCS) during the extravehicular activity (EVA) in a 3.75 psia suit after exposure to either of the three habitat conditions may limit unrestricted exploration.