WorldWideScience

Sample records for brasil-argentina agencia contabil controle mater nuclear

  1. A integração bilateral Brasil-Argentina: tecnologia nuclear e Mercosul

    OpenAIRE

    Oliveira, Odete Maria de

    1998-01-01

    O presente trabalho focaliza o complexo processo de integração bilateral Brasil-Argentina, iniciado formalmente na década de 80, desdobrado em sua dupla abrangência: a) cooperação pacífica da tecnologia nuclear; b) constituição de um mercado comum. A evolução desse processo conduziu-se através de ciclos fundamentais: primeira etapa, antecedentes de aproximação; segunda etapa, os decisivos instrumentos da ampla integração; terceira etapa, solidificação de duas bases, uma de nível tecnológico n...

  2. A integração bilateral Brasil-Argentina: tecnologia nuclear e Mercosul

    Directory of Open Access Journals (Sweden)

    Odete Maria de Oliveira

    1998-06-01

    Full Text Available O presente trabalho focaliza o complexo processo de integração bilateral Brasil-Argentina, iniciado formalmente na década de 80, desdobrado em sua dupla abrangência: a cooperação pacífica da tecnologia nuclear; b constituição de um mercado comum. A evolução desse processo conduziu-se através de ciclos fundamentais: primeira etapa, antecedentes de aproximação; segunda etapa, os decisivos instrumentos da ampla integração; terceira etapa, solidificação de duas bases, uma de nível tecnológico nuclear, pactuando um sistema sui generis de salvaguardas e a vigência do Tratado de Tlatelolco (emendado, e, outra, de nível econômico pelo Tratado de Assunção, instituindo o Mercosul.The present work focuses on the complex bilateral integration process involving Brazil and Argentina that began formally during the 80's, and displayed in its double scope: a pacific cooperation on nuclear technology; b constitution of a common market. This process evolution took place in three fundamental circles: the first one, approximation antecedents; the second one, decisive instruments for a large integration; and the third one, the solidification of two basis, one at the nuclear technological level, joining the two countries in the sui generis back up system and the operation of the Tlatelolco Treaty, the other, at the economic level instituting the Mercosur by the Asunción Treaty.

  3. Co-operation Agreement. The Text of the Agreement of 25 May 1998 between the International Atomic Energy Agency and the Brazilian-Argentine Agency for Accounting and Control of Nuclear Materials; Acuerdo de Cooperacion. Texto del Acuerdo de 25 de Mayo de 1998 entre el Organismo Internacional de Energia Atomica y la Agencia Brasileno-Argentina de Contabilidad y Control de Materiales Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-30

    The text of the Co-operation Agreement between the International Atomic Energy Agency and the Brazilian-Argentine Agency for Accounting and Control of Nuclear Materials is reproduced herein for the information of all Members. The Agreement entered into force on 25 May 1998, pursuant to Article 8 [Spanish] El texto del Acuerdo de Cooperacion entre el Organismo Internacional de Energia Atomica y la Agencia Brasileno-Argentina de Contabilidad y Control de Materiales Nucleares se reproduce en el presente documento para informacion de todos los Miembros. El Acuerdo entro en vigor el 25 de mayo de 1998 en conformidad con lo dispuesto en el articulo 8.

  4. Uranium determination in natural U O2 samples for the laboratory intercomparison program of Agencia Brasileiro-Argentina de Contabilidade e Controle de Materiais Nucleares (ABACC)

    International Nuclear Information System (INIS)

    Avelar, Marta M.; Palmieri, Helena E.L.; Reis Fagundes, Oliene dos

    1997-01-01

    The modified Davies and Gray method for uranium titration to analyse nuclear materials is the procedure used by the CDTN's chemical laboratory. Its analytical performance was evaluated through the participation in the intercomparison program with the Brazilian - Argentine Agency for Accountability and Control of Nuclear Materials (ABACC). One sample of natural uranium dioxide was analysed. The precision and accuracy of the measurements are reported and discussed in this paper. (author). 7 refs., 1 fig., 2 tabs

  5. ABACC - Brazil-Argentina Agency for Accounting and Control of Nuclear Materials, a model of integration and transparence; ABACC - Agencia Brasileno-Argentina de Contabilidad y Control de Materiales Nucleares, un ejemplo de integracion y transparencia

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Antonio A.; Do Canto, Odilon Marcusso, E-mail: oliveira@abacc.org.br, E-mail: odilon@abacc.org.br [Agencia Brasileno Argentina de Contabilidad y Control de Materiales Nucleares (ABACC), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    Argentina and Brazil began its activities in the nuclear area about the same time, in the 50 century past. The existence of an international nuclear nonproliferation treaty-TNP-seen by Brazil and Argentina as discriminatory and prejudicial to the interests of the countries without nuclear weapons, led to the need for a common system of control of nuclear material between the two countries to somehow provide assurances to the international community of the exclusively peaceful purpose of its nuclear programs. The creation of a common system, assured the establishment of uniform procedures to implement safeguards in Argentina and Brazil, so the same requirements and safeguards procedures took effect in both countries, and the operators of nuclear facilities began to follow the same rules of control of nuclear materials and subjected to the same type of verification and control. On July 18, 1991, the Bilateral Agreement for the Exclusively Peaceful Use of Nuclear Energy created a binational body, the Argentina-Brazil Agency for Accounting and Control of Nuclear Materials-ABACC-to implement the so-called Common System of Accounting and Control of Nuclear materials - SCCC. The deal provided, permanently, a clear commitment to use exclusively for peaceful purposes all material and nuclear facilities under the jurisdiction or control of the two countries. The Quadripartite Agreement, signed in December of that year, between the two countries, ABACC and IAEA completed the legal framework for the implementation of comprehensive safeguards system. The 'model ABACC' now represents a paradigmatic framework in the long process of economic, political, technological and cultural integration of the two countries. Argentina and Brazil were able to establish a guarantee system that is unique in the world today and that consolidated and matured over more than twenty years, has earned the respect of the international community.

  6. Átomos na integração: a aproximação Brasil-Argentina no campo nuclear e a construção do Mercosul

    Directory of Open Access Journals (Sweden)

    Everton Vieira Vargas

    1997-06-01

    Full Text Available Este trabalho tenciona ser uma reflexão sobre a importância da aproximação entre o Brasil e a Argentina no campo nuclear, na segunda metade da década de 80 e no início dos anos 90, como fundamento para a construção de um relacionamento novo que suplantou uma rivalidade histórica entre ambos. O processo de aproximação encetado com um propósito aparentemente econômico, tinha uma dimensão estratégica. As repercussões desse esforço iam além dos interesses bilaterais imediatos e se refletiram na busca de uma nova inserção internacional dos dois países, num momento de transformações profundas nos planos interno e internacional. Através do programa de integração Brasil-Argentina (que mais tarde também envolveu o Uruguai e do MERCOSUL buscou-se estabelecer uma arquitetura político-jurídica, que criou uma realidade que extrapola o campo econômico e projeta-se no terreno político.This paper aims to be a reflection on the importance of the Brazil and Argentina closer relations in the nuclear field, in the late eighties and early nineties, as the basis for building a new relationship that replaced a historical rivalry. The aproximation process has begun with apparently economic purposes, but also had a strategic dimension. The repercussions of this effort went beyond immediate bilateral interests, reflected in the search for a new international insertion by both countries, at a time of deep transformations, both internally and internationally. The Brazil-Argentina integration program (that later also involved Uruguay and MERCOSUL led to the establishment of a political-legal structure that created a reality that goes beyond economics to the political domain.

  7. Da corrida atômica à cooperação: a questão nuclear nas relações Brasil-Argentina

    Directory of Open Access Journals (Sweden)

    Jonas Teixeira Marinho

    2017-06-01

    Full Text Available Este artigo visa a analisar o impacto da questão nuclear para a mudança de paradigma no relacionamento entre Brasil e Argentina. Para tanto, foram utilizados dados de documentos oficiais e revisão da produção bibliográfica. Conclui-se que a cooperação nuclear foi decisiva para o processo de integração.

  8. Átomos na integração: a aproximação Brasil-Argentina no campo nuclear e a construção do Mercosul

    OpenAIRE

    Vargas, Everton Vieira

    1997-01-01

    Este trabalho tenciona ser uma reflexão sobre a importância da aproximação entre o Brasil e a Argentina no campo nuclear, na segunda metade da década de 80 e no início dos anos 90, como fundamento para a construção de um relacionamento novo que suplantou uma rivalidade histórica entre ambos. O processo de aproximação encetado com um propósito aparentemente econômico, tinha uma dimensão estratégica. As repercussões desse esforço iam além dos interesses bilaterais imediatos e se refletiram na b...

  9. The accountability of the brazilian regulatory agencies: the experience of the National Petroleum Agency; O controle externo das agencias reguladoras: o caso da Agencia Nacional do Petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Pinto Junior, Helder Queiroz; Borges, Heloisa Lopes [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Economia. Grupo de Economia da Energia

    2004-07-01

    During the reform process for which passed the Brazilian Oil and Gas Industry, the academic debate was centered mostly in the sectorial restructuring process, in the contract designs and regulatory environment for the industries in change, particularly the desired attributes of its institutions. The debate tends, in the present, to converge towards the existence of different possible combinations between market structures and institutional structures (the regulators among them) that would lead to a desirable result. Thus, the various characteristics and configurations, originally appointed as necessary conditions for the success of any reform, are not dealt with such great deference anymore. The hypothesis that the existence of a independent regulator is a determinant choice for the success of structural and institutional reforms was relaxed as general rule, but there are still strong economic reasons to justify the option, adopted in Brazil. The creation of the Oil National Agency (ANP), the Brazilian regulator for the Oil and Gas Industry is a recent phenomenon. And few studies specifically approach the issue of its accountability, institutional role that in Brazil is delegated mostly, but not exclusively, to the National Court of Accounts (Tribunal de Contas da Uniao). Therefore, the objective of this work will be to discuss the different possibilities of accountability over the ANP, evaluating the paper and the functions of the TCU and the forms of external control on the Agency, pointing out the possibilities, the impediments and the challenges, as well as the economic consequences to the Natural Gas Industry of the current configuration. (author)

  10. Mujeres, esfera pública y populismo en Brasil, Argentina y Ecuador, 1870-1960

    OpenAIRE

    Ximena Sosa-Buchholz

    2008-01-01

    Este trabajo se enfoca en las luchas de las mujeres para convertirse en actores políticos en tres países latinoamericanos: Brasil, Argentina y Ecuador. Analiza la educación de las mujer es como un factor decisivo para obtener el derecho al voto e ingresar a la arena pública mediante la publicación de periódicos. Se estudia la manera como las mujeres crearon sus propias organizaciones políticas, muchas de las cuales fueron respaldadas por liberales, conservadores e incluso socialistas. A pe...

  11. The "RESEAU MATER": An efficient infection control for endometritis, but not for urinary tract infection after vaginal delivery.

    Science.gov (United States)

    Ayzac, Louis; Caillat-Vallet, Emmanuelle; Girard, Raphaële; Berland, Michel

    "RESEAU MATER" is useful to monitor nosocomial infections in maternity and contributes to the decreasing trend of it, since its implementation. Specifically, this network demonstrates its efficiency in the control of endometritis following vaginal deliveries, but not in the control of urinary tract infections. The aim of this study is to determine whether the difference between the control of endometritis and of urinary tract infection could be explained by an unsuitable regression model or by an unsuitable care policy concerning urinary cares. This study includes (1) the analysis of historic data of the network and (2) the description of French guidelines for maternity cares and available evaluations, concerning endometritis and urinary tract infection prevention. Univariate and multivariate odds ratios (ORs) were calculated for the total study period of 1999-2013, for these infections and their risk factors. The endometritis frequency is decreasing, in association with no significant evolution of associated risk factors, but urinary tract infection frequency is constant, in association with a increasing trend of its risk factors such as intermittent catheterization and epidural analgesia. In French guidelines, all preventive measures against endometritis are clearly broadcasted by all field operators, and repeated audits have reinforced the control of their application. But preventive measures against urinary tract infection seem to be broadcasted exclusively in the circle of infection prevention agencies and not in the obstetrics societies or in the Health Ministry communication. Urinary tract infection prevention requires a clearer public and professional policy in favor of a more efficient urinary cares, with a specific target to maternity. Copyright © 2016 King Saud Bin Abdulaziz University for Health Sciences. Published by Elsevier Ltd. All rights reserved.

  12. Stabat Mater. Chant gregorien / Patric Wiklacz

    Index Scriptorium Estoniae

    Wiklacz, Patric

    1997-01-01

    Uuest heliplaadist "Stabat Mater. Chant gregorien. Palestrina: Stabat Mater a 8; Pärt: Stabat Mater; Browne: Stabat Mater dolorosa a 6. Fretwork (concort de violes)". Virgin Classics 545 272-2 (CD: 167F)

  13. Colombia, Brasil, Argentina y Chilepráctica educativa y orientaciones pedagógicas

    Directory of Open Access Journals (Sweden)

    Carlos Federico Ayala Zuluaga

    2017-01-01

    Full Text Available El presente artículo discute aspectos de la Práctica Educativa en cuatro universidades oficiales, o del estado, en: Colombia, Brasil, Argentina, y Chile y está en relación con las orientaciones pedagógicas propuestas por Feiman (1990 e Imbernon (2007. El enfoque de la investigación es cualitativo y busca comprender aspectos intrínsecos, regionales, culturales, y políticos de la práctica educativa relacionada con orientaciones pedagógicas, mediante un proceso de preanálisis fluctuante de la información, la codificación e identificación de categorías, y finalmente la descripción, categorización, inferencia e interpretación de la información recogida. En los resultados se evidencia que las orientaciones pedagógicas convergen en la acción, la reflexión, el conocimiento, el uso de las Tecnologías digitales de información y comunicación, y en el desarrollo de la identidad docente. Conclusiones principales: las orientaciones pedagógicas predominantes en la práctica educativa oficial son la académica y la tecnicista, y en las universidades son la tradicional, académica, de eficacia social, hermenéutica y la centrada en procesos.

  14. Invasive vertebrate species in Chile and their control and monitoring by governmental agencies Especies de vertebrados invasores en Chile y su control y monitoreo por agencias gubernamentales

    Directory of Open Access Journals (Sweden)

    J. AGUSTÍN IRIARTE

    2005-03-01

    Full Text Available We provide an overview of the current status of vertebrate invasive species throughout Chile, updating information on terrestrial exotics and reporting for the first time the situation of exotic freshwater fishes. In addition, we document the legislation and programs that the Chilean government has implemented to limit the entry of exotics to the country or minimize their impact on native wild flora and fauna and on natural ecosystems. We document what is known about the introduction of 26 exotic fish species to continental waters of the country, discussing the distribution and putative effects of those 11 species that may be considered invasive. From a previous list of 24 terrestrial vertebrate invaders, we withdraw the Argentine tortoise (Chelonoidis chilensis, reindeer (Rangifer tarandus and mouflon (Ovis ammon because there are no data on their subsistence in the wild. On the other hand, we add three new species: red-eared freshwater turtle (Trachemys scripta, monk parakeet (Myiopsitta monachus, and red-crested cardinal (Paroaria coronata, thus keeping the total number of terrestrial invaders unchanged at 24 species. The chief agency in charge of existing laws and regulations regarding the import of exotic freshwater species is the National Fisheries Service (SERNAPESCA, in Spanish, a dependency of the Ministry of Economy. The main agency in charge of enforcing existing laws and regulations regarding the import of exotic terrestrial species to Chile is the Agriculture and Livestock Service (SAG, in Spanish, a dependency of the Ministry of Agriculture. Currently, SAG is not only controlling major border passes, seaports and airports, but also is funding studies to monitor and control already existing invaders. In addition, the Chilean Forest Service (CONAF, in Spanish is also concerned about invasive species, but only if they enter national parks and reserves within the National System of Protected Wildlife Areas (SNASPE, in Spanish

  15. The Nuclear Energy Agency of the OECD through its history; La Agencia de Energia Nuclear de la OCDE, a traves de su historia

    Energy Technology Data Exchange (ETDEWEB)

    Echavarri, L.

    2008-07-01

    This year, 2008, marks the 50th Anniversary of the OECD Nuclear Energy Agency (NEA). During these years the Agency has adapted to the evolution of the world energy situation. At the beginning the Agency launches international collaboration projects to establish the technological bases required for nuclear energy, then helps member countries in the construction of nuclear power plants and later analyzes the safety criteria as a consequence of the Three Miles Island and Chernobyl accidents. Based on this experience, the NEA faces the X XI Century prepared to contribute, even more, to a better international collaboration for a safe, environmentally friendly and economical use of the nuclear energy. (Author)

  16. Própolis produzida no sul do Brasil, Argentina e Uruguai: evidências fitoquímicas de sua origem vegetal

    Directory of Open Access Journals (Sweden)

    Park Yong Kun

    2002-01-01

    Full Text Available A própolis é uma substância resinosa coletada pelas abelhas de diversas partes da planta. Sua composição depende da época, vegetação e área de coleta. Própolis produzida por abelhas Apis mellifera africanizada do sul do Brasil, Argentina e Uruguai foram investigadas por meio de técnicas cromatográficas. De acordo com os resultados obtidos por CCDAE-FR, CLAE-FR e CG-EM, as própolis do sul do Brasil foram classificadas em 5 grupos distintos. Com base nas evidências fitoquímicas, Populus alba foi identificada como a principal fonte da própolis do grupo 3 do sul do Brasil, Argentina e Uruguai.

  17. Problema de la agencia y la cultura corporativa estalinista

    Directory of Open Access Journals (Sweden)

    Yurí Gorbaneff

    2004-12-01

    Full Text Available El problema de la agencia es de los obstáculos para la eficiencia de las organizaciones. A partir de Alchian y Demsetz (1972.la teoría sugiere dos soluciones: la propiedad privada y la cultura corporativa. Sin embargo, aislar el efecto de la cultura sobre las organizaciones no es fácil. La "ingeniería social" estalinista ofrece un material interesante para evaluar los efectos de la cultura corporativa sobre el sistema económico. Acá se sostiene la hipótesis de que los dirigentes soviéticos, al enfrentar los crecientes costos de la agencia tuvieron que inventar otra método, que no fuera la propiedad privada ni el control democrático directo sobre el aparato productivo, para controlar la pérdida de la agencia. Ellos recurrieron a la implantación de la cultura corporativa heroica a nivel nacional. Este trabajo muestra que la propaganda política, el arte, la literatura, los movimientos populares y el culto a la personalidad de Stalin fueran las herramientas gerenciales clave para implantar la cultura corporativa heroica, indispensable en la economía planificada. Su aplicación fue exitosa y generó las condiciones necesarias para la industrialización entre 1920 y 1930 y para el alto desempeño de la economía soviética durante la Segunda Guerra Mundial. La segunda hipótesis consiste en que el fantasma de la agencia, ahuyentado entre 1920 y 1950 por la cultura heroica estalinista, terminó devorando la economía planificada.

  18. The collagenic architecture of human dura mater.

    Science.gov (United States)

    Protasoni, Marina; Sangiorgi, Simone; Cividini, Andrea; Culuvaris, Gloria Tiffany; Tomei, Giustino; Dell'Orbo, Carlo; Raspanti, Mario; Balbi, Sergio; Reguzzoni, Marcella

    2011-06-01

    Human dura mater is the most external meningeal sheet surrounding the CNS. It provides an efficient protection to intracranial structures and represents the most important site for CSF turnover. Its intrinsic architecture is made up of fibrous tissue including collagenic and elastic fibers that guarantee the maintenance of its biophysical features. The recent technical advances in the repair of dural defects have allowed for the creation of many synthetic and biological grafts. However, no detailed studies on the 3D microscopic disposition of collagenic fibers in dura mater are available. The authors report on the collagenic 3D architecture of normal dura mater highlighting the orientation, disposition in 3 dimensions, and shape of the collagen fibers with respect to the observed layer. Thirty-two dura mater specimens were collected during cranial decompressive surgical procedures, fixed in 2.5% Karnovsky solution, and digested in 1 N NaOH solution. After a routine procedure, the specimens were observed using a scanning electron microscope. The authors distinguished the following 5 layers in the fibrous dura mater of varying thicknesses, orientation, and structures: bone surface, external median, vascular, internal median, and arachnoid layers. The description of the ultrastructural 3D organization of the different layers of dura mater will give us more information for the creation of synthetic grafts that are as similar as possible to normal dura mater. This description will be also related to the study of the neoplastic invasion.

  19. A reforma do setor elétrico no Brasil, Argentina e México: contrastes e perspectivas em debate

    Directory of Open Access Journals (Sweden)

    Alessandro André Leme

    2009-06-01

    Full Text Available A década de 1990 foi marcada por um movimento global de Reformas do Estado, principalmente nos países em desenvolvimento. Nesse processo, as orientações das agências multilaterais fizeram-se mais presentes. O conjunto de reformas liberalizantes transferiu para o setor privado setores até então em mãos do Estado. Dentre esses setores destacamos o caso da infra-estrutura energética. O setor elétrico no Brasil, na Argentina e no México consolidou-se após a II Guerra Mundial, sendo majoritariamente ligado ao Estado. Na década de 1990, nesses três países, esse setor passa por mudanças privatizantes. O quadro de fundo (plano político-econômico era muito similar entre os países, embora preservassem particularidades econômicas e político-institucionais. A crise de hiperinflação na década de 1980 e as fortes pressões dos organismos multilaterais para a realização de reformas para o mercado (privatização e flexibilização, dentre outros aspectos levou a mudanças no setor elétrico desses países. Partimos, neste trabalho, de uma abordagem histórico-estrutural e estratégica. Analisamos as reformas no setor elétrico brasileiro em diálogo com as ocorridas na Argentina e no México. Concluímos definindo as principais semelhanças e diferenças entre as políticas liberalizantes do setor elétrico no Brasil, Argentina e México e delimitamos os principais fatores dessas variações, ressaltando a não existência de unicidade histórica na escolhas de estratégias, mas sim composição de estratégias de desenvolvimento decorrentes do embate entre as diversas forças políticas presentes e atuantes num determinado espaço (Estado com suas variantes nacionais e internacionais.

  20. Análise do sistema de normalização contabilística da Polónia

    OpenAIRE

    Silva, Ana Margarida Pinto

    2009-01-01

    A Lei da Contabilidade (“Ustawa o Rachunkowosci”), aprovada pelo Parlamento Polaco em 29 de Setembro de 1994, constituiu um passo significativo na incorporação das normas de Contabilidade ocidentais. De acordo com UNCTD (2008), essa lei define os mais importantes e fundamentais conceitos contabilísticos, tornando as demonstrações financeiras polacas comparáveis e proporcionando uma maior transparência nas operações económicas na Polónia. Desde o início da reforma da Contabil...

  1. Controlling nuclear proliferation

    International Nuclear Information System (INIS)

    Sweet, W.

    1981-01-01

    Nuclear non-proliferation policy depends on the 1968 Non-Proliferation Treaty, in which countries promise not to acquire nuclear weapons in exchange for open access to peaceful nuclear technology, and a system of international safeguards that are imposed on exported nuclear equipment and facilities operated by parties to the treaty. Critics have feared all along that non-nuclear countries might circumvent or exploit the system to obtain nuclear weapons and that the Atoms for Peace plan would spread the very technology it sought to control. The nuclear weapons states would like everyone else to believe that atomic bombs are undesirable, but they continue to rely on the bombs for their own defense. Israel's raid on Iraq's nuclear reactor focused world attention on the proliferation problem and helped to broaden and sterengthen its prospects. It also highlighted the weakness that there are no effective sanctions against violators. Until the international community can ageee on enforcement measures powerful enough to prevent nuclear proliferation, individual countries may be tempted to follow Israel's example, 19 references

  2. Nuclear export controls

    International Nuclear Information System (INIS)

    Thorne, C.E.

    1999-01-01

    One approach to describing the multilateral nuclear export controls is to do it according to time. This led to an interesting discovery, i.e. multilateral export controls have been defined by four distinct periods, the forst two of abut five years each, the second two about twice as long. These time periods have another interesting property. The two suppliers groups, which we will discuss in detail, have alternated in dominance over nearly thirty years. After describing the historical developments, the status of the present situation in multilateral nuclear export controls is examined, with the strengths and weaknesses. The future of multilateral nuclear export controls and possible ways that might be taken are considered

  3. Multiple nuclear ADC controller

    Energy Technology Data Exchange (ETDEWEB)

    Lovett, A; Rapaport, M S [Center for Nuclear Research, Soreq (Israel)

    1980-12-01

    A controller for an on-line three parameter coincidence and multispectra scaling system has been developed. It has been designed to control, event-by-event, the outputs of three nuclear analog-to-digital converters used at the SOLIS facility. The system utilizes an HP minicomputer with a 32k-word core memory, a disc drive and magnetic tape units.

  4. Relações Brasil-Argentina: a cooperação cultural como instrumento de integração regional

    Directory of Open Access Journals (Sweden)

    Raquel Paz dos Santos

    2009-12-01

    Full Text Available Este estudo desenvolve uma nova perspectiva das relações Brasil-Argentina a partir da análise de sua dimensão cultural entre os anos 1930-1954. Trata-se de mostrar como uma aproximação entre esses dois países foi incentivada através de projetos de cooperação intelectual, científica e artística, com o objetivo de desfazer imagens negativas e criar um sentimento de fraternidade entre brasileiros e argentinos. Com base na ideia de que uma maior cooperação contribuiria para o fortalecimento da região, e com o objetivo de alcançar uma futura integração econômica, essa prática também foi estimulada entre os demais países da América do Sul.

  5. Nuclear reactor control column

    International Nuclear Information System (INIS)

    Bachovchin, D.M.

    1982-01-01

    The nuclear reactor control column comprises a column disposed within the nuclear reactor core having a variable cross-section hollow channel and containing balls whose vertical location is determined by the flow of the reactor coolant through the column. The control column is divided into three basic sections wherein each of the sections has a different cross-sectional area. The uppermost section of the control column has the greatest crosssectional area, the intermediate section of the control column has the smallest cross-sectional area, and the lowermost section of the control column has the intermediate cross-sectional area. In this manner, the area of the uppermost section can be established such that when the reactor coolant is flowing under normal conditions therethrough, the absorber balls will be lifted and suspended in a fluidized bed manner in the upper section. However, when the reactor coolant flow falls below a predetermined value, the absorber balls will fall through the intermediate section and into the lowermost section, thereby reducing the reactivity of the reactor core and shutting down the reactor

  6. Quality control in nuclear medicine

    International Nuclear Information System (INIS)

    Leme, P.R.

    1983-01-01

    The following topics are discussed: objectives of the quality control in nuclear medicine; the necessity of the quality control in nuclear medicine; guidelines and recommendations. An appendix is given concerning the guidelines for the quality control and instrumentation in nuclear medicine. (M.A.) [pt

  7. Autoantibody response against NALP5/MATER in primary ovarian insufficiency and in autoimmune Addison's disease.

    Science.gov (United States)

    Brozzetti, Annalisa; Alimohammadi, Mohammad; Morelli, Silvia; Minarelli, Viviana; Hallgren, Åsa; Giordano, Roberta; De Bellis, Annamaria; Perniola, Roberto; Kämpe, Olle; Falorni, Alberto

    2015-05-01

    NACHT leucine-rich-repeat protein 5 (NALP5)/maternal antigen that embryo requires (MATER) is an autoantigen in hypoparathyroidism associated with autoimmune polyendocrine syndrome type 1 (APS1) but is also expressed in the ovary. Mater is an autoantigen in experimental autoimmune oophoritis. The objectives of the study were to determine the frequency of NALP5/MATER autoantibodies (NALP5/MATER-Ab) in women with premature ovarian insufficiency (POI) and in patients with autoimmune Addison's disease (AAD) and to evaluate whether inhibin chains are a target for autoantibodies in POI. Autoantibodies against NALP5/MATER and inhibin chains-α and -βA were determined by radiobinding assays in 172 patients with AAD without clinical signs of gonadal insufficiency, 41 women with both AAD and autoimmune POI [steroidogenic cell autoimmune POI (SCA-POI)], 119 women with idiopathic POI, 19 patients with APS1, and 211 healthy control subjects. NALP5/MATER-Ab were detected in 11 of 19 (58%) sera from APS1 patients, 12 of 172 (7%) AAD sera, 5 of 41 (12%) SCA-POI sera, 0 of 119 idiopathic POI sera and 1 of 211 healthy control sera (P < .001). None of 160 POI sera, including 41 sera from women with SCA-POI and 119 women with idiopathic POI, and none of 211 healthy control sera were positive for inhibin chain-α/βA autoantibodies. NALP5/MATER-Ab are associated with hypoparathyroidism in APS1 but are present also in patients with AAD and in women with SCA-POI without hypoparathyroidism. Inhibin chains do not appear to be likely candidate targets of autoantibodies in human POI.

  8. Nuclear reactor control assembly

    International Nuclear Information System (INIS)

    Negron, S.B.

    1991-01-01

    This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other

  9. Controlling nuclear retrofit costs

    International Nuclear Information System (INIS)

    Gruber, C.O.

    1985-01-01

    Increased safety regulations that required modifications to nuclear power plants have had an impact on the capital and expense budgets of utilities. The author addresses the budgeting and control of project-related expenditures, and notes the importance of total cost management throughout the project's life cycle. That total includes the systems, procedures, personnel, expertise, and organization involved in the process. A rational and structured evaluation process at the beginning, realistic targets, and an organizational framework are key components. 2 references, 3 figures, 1 table

  10. POMEN DOJENJA ZA OTROKA IN MATER

    OpenAIRE

    Apat, Alja

    2014-01-01

    Dojenje je naravni način hranjenja otroka v prvih mesecih njegovega življenja. Omogoča optimalno telesno in duševno rast ter razvoj otroka. Materino mleko vsebuje vsa življenjsko pomembna hranila v pravilnem ravnovesju. Dojenje ima mnoge prednosti, tako za mater, ki doji, kakor za njenega otroka. Pomembno vlogo pri dojenju imajo tudi medicinske sestre v porodnišnici in patronažne medicinske sestre. Njihova naloga je tudi zdravstveno-vzgojno delo pri dojenju. Cilj raziskave je bil ugotoviti os...

  11. Nuclear image display controller

    International Nuclear Information System (INIS)

    Roth, D.A.

    1985-01-01

    In a nuclear imaging system the digitized x and y coordinates of gamma ray photon emission events address memory locations corresponding to the coordinates. The respective locations are incremented each time they are addressed so at the end of a selected time or event count period the locations contain digital values or raw data corresponding to the intensity of pixels comprising an image frame. The raw data for a frame is coupled to one input of an arithmetic logic unit (ALU) whose output is coupled to a display controller memory. The output of the controller memory is coupled to another ALU input with a feedback bus and is also coupled to a further signal processing circuit which includes means for converting processed data to analog video signals for television display. The ALU is selectively controlled to let raw image data pass through to the display controllor memory or alternately to add (or subtract) raw data for the last image frame developed to the raw data for preceding frames held in the display controller to thereby produce the visual effect on the television screen of an isotope flowing through anatomy

  12. Nuclear reactivity control configuration

    International Nuclear Information System (INIS)

    Bingham, B.E.; DeMars, R.V.

    1990-01-01

    This patent describes a neutron flux control component assembly for use in a nuclear reactor. It comprises: at least three V-shaped close fitting carrier sheets nested together to provide a Y-shaped cross section and which are movable relative to each other along their longitudinal axis; at least three substantially identical neutron poison segments, one of each of the carrier sheets, movable between overlapped and exposed positions in response to movement of the carrier sheets; and each of the poison segments having a width grater than three times the effective thickness of the assembly of overlapping poison segments and capable of absorbing at least eighty percent of the neutrons that strike its surface

  13. Nuclear controls are stringent

    International Nuclear Information System (INIS)

    Sonnekus, D.

    1983-01-01

    The peace-time application of nuclear power in South Africa, the organisations concerned and certain provisions laid down by the Act on Nuclear Energy, aimed at safeguarding the general public, are discussed

  14. Alteraçoes das práticas contabilísticas na Casa da Moeda de Lisboa no século XVIII = Changes in accounting practices at the Lisbon Mint in the 18th century

    Directory of Open Access Journals (Sweden)

    Rita Martins De Sousa

    2011-12-01

    Full Text Available En este artículo se explica el cambio de prácticas contables en la Casa da Moeda de Lisboa encuadrándolas en la política de difusión de la contabilidad por partida doble en el ámbito público en Portugal durante la segunda mitad del siglo XVIII.La necesidad del Estado de ejercer un mayor control sobre sus fuentes de ingresos justificó la transformación ocurrida demostrando la adaptación de las prácticas contables a las características de cada organización. En la Casa da Moeda, lo específico de su misión acuñación de monedas originó una legislación propia fechada en 1773. La periodización de estas prácticas contables en la Casa da Moeda de Lisboa se organizó en tres fases: la primera entre 1686 y 1761, la segunda entre 1761 y 1773 y por último desde 1773 a 1797, período final de este estudio.This article explains the changes made to accounting practices at the Lisbon Mint within the context of the introduction of double-entry bookkeeping into the public sphere in Portugal during the second half of the 18th century.The State’s requirement to exercise greater control over its sources of income justified the changes that took place, with accounting practices being adapted to the features of each organisation. The Mint's specific function –the minting of metallic money– gave rise to the creation of its own particular legislation, in 1773. The study of these accounting practices at the Lisbon Mint will be divided into three separate periods: firstly from 1686 to 1761, secondly from 1761 to 1773, and finally from 1773 to 1797. Neste artigo explica-se a alteração das práticas contabilísticas na Casa da Moeda de Lisboa enquadrando-as na política de difusão da contabilidade por partidas dobradas na esfera pública, em Portugal, na segunda metade do século XVIII.A necessidade de um maior controlo exercido pelo Estado sobre as suas fontes de receita justificarão as transformações ocorridas, demonstrando estas a

  15. Nuclear safeguards control in nuclear power stations

    International Nuclear Information System (INIS)

    Boedege, R.; Braatz, U.; Heger, H.

    1976-01-01

    The execution of the Non-Proliferation Treaty (NPT) has initiated a third phase in the efforts taken to ensure peace by limiting the number of atomic powers. In this phase it is important, above all, to turn into workable systems the conditions imposed upon technology by the different provisions of the Verification Agreement of the NPT. This is achieved mainly by elaborating annexes to the Agreement specifically geared to certain model plants, typical representatives selected for LWR power stations being the plants at Garigliano, Italy (BWR), and Stade, Federal Republic of Germany (PWR). The surveillance measures taken to prevent any diversion of special nuclear material for purposes of nuclear weapons manufacture must be effective in achieving their specific objective and must not impede the circumspect management of operations of the plants concerned. A VDEW working party has studied the technical details of the planned surveillance measures in nuclear power stations in the Federal Republic of Germany and now presents a concept of material balancing by units which meets the conditions imposed by the inspection authority and could also be accepted by the operators of nuclear power stations. The concept provides for uninterrupted control of the material balance areas of the nuclear power stations concerned, allows continuous control of the whole nuclear fuel cycle, is based exclusively on existing methods and facilities, and can be implemented at low cost. (orig.) [de

  16. Global nuclear material control model

    International Nuclear Information System (INIS)

    Dreicer, J.S.; Rutherford, D.A.

    1996-01-01

    The nuclear danger can be reduced by a system for global management, protection, control, and accounting as part of a disposition program for special nuclear materials. The development of an international fissile material management and control regime requires conceptual research supported by an analytical and modeling tool that treats the nuclear fuel cycle as a complete system. Such a tool must represent the fundamental data, information, and capabilities of the fuel cycle including an assessment of the global distribution of military and civilian fissile material inventories, a representation of the proliferation pertinent physical processes, and a framework supportive of national or international perspective. They have developed a prototype global nuclear material management and control systems analysis capability, the Global Nuclear Material Control (GNMC) model. The GNMC model establishes the framework for evaluating the global production, disposition, and safeguards and security requirements for fissile nuclear material

  17. Agencias conectadas: un estudio sobre el perfil creativo de la nueva agencia digital en España

    OpenAIRE

    Tabasco Rincón, Esperanza

    2017-01-01

    El presente trabajo es una memoria de TFG del Grado en Publicidad y Relaciones Públicas de la Universidad de Valladolid. En esta investigación trataremos el cambio de la estructura de la agencia y de todo el sistema publicitario en el contexto digital. Por ello, indagaremos en el proceso de adaptación de los profesionales del departamento creativo (Copy writer y Director de arte) en las agencias digitales. El estudio recoge la opinión comparada de dos profesionales senior (copywriter y art di...

  18. Nuclear reactor control rod

    International Nuclear Information System (INIS)

    Cearley, J.E.; Izzo, K.R.

    1987-01-01

    This patent describes a vertically oriented bottom entry control rod from a nuclear reactor: a frame including an elongated central spine of cruciform cross section connected between an upper support member and a lower support member both of cruciform shape having four laterally extending arms. The arms are in alignment with the arms of the lower support member and each aligned upper and lower support members has a sheath extending between; absorber plates of neutron absorber material, different from the material of the frame, one of the absorber plates is positioned within a sheath beneath each of the arms; attachment means suspends the absorber plates from the arms of the upper support member within a sheath; elongated absorber members positioned within a sheath between each of the suspended absorber plates and an arm of the lower support member; and joint means between the upper ends of the absorber members and the lower ends of the suspended absorber plates for minimizing gaps; the sheath means encloses the suspended absorber plates and the absorber members extending between aligned arms of the upper and lower support members and secured

  19. Technical supports for nuclear control

    Energy Technology Data Exchange (ETDEWEB)

    An, Jong Sung; Kwak, Eun Hoh; Noh, Sung Kee; Soh, Dong Sub; Yoon, Wan Kee; Shin, Jang Soo; Paek, Dae Hyun; Park, Wan Soo; Kim, Hyun Tae; Park, Chan Sik; Cha, Hong Yul; Choi, Yoon Dong; Park, Jin Hoh; Lee, Eui Jin; An, Jin Soo; Kim, Jong Heui [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-12-01

    The project was carried out to support the establishment of the system of accountancy and control of nuclear materials in Korea. The training of inspectors and seminar were held to improve inspection capability of the nuclear inspectors. The information about the north Korean nuclear activities were successfully analyzed. In the drafts of nuclear energy law the national inspection and the regulation of physical protection were newly introduced for the purpose to clarify the openness of nuclear activities in Korea. 1 fig, 20 tabs, 19 refs. (Author).

  20. Agencia de autocuidado y factores de riesgo cardiovascular en adolescentes

    Directory of Open Access Journals (Sweden)

    Rosa del Socorro Morales Aguilar

    2016-05-01

    Full Text Available Objetivo: Este estudio tuvo como objetivo determinar la relación entre la capacidad de agencia de autocuidado y los factores de riesgo cardiovascular en adolescentes de una Institución de Educación Superior en el Distrito de Barranquilla, Colombia. Metodología: Estudio descriptivo, exploratorio, de corte transversal, con abordaje cuantitativo, basado en la Teoría del Déficit de Autocuidado de Dorothea Orem. La muestra fue compuesta por 133 adolescentes, seleccionados mediante muestreo aleatorio simple. Se aplicaron la Escala Apreciación de la Agencia de Autocuidado (segunda versión en español, el Cuestionario Internacional de Actividad Física (versión corta y la Encuesta Mundial de Tabaquismo en Jóvenes. Para el análisis de los niveles de significancia se utilizó la prueba de Kruskal-Wallis para muestras independientes. Resultados: La mayor parte de los participantes presentó niveles de capacidad de agencia de autocuidado media y alta respectivamente. De acuerdo con la identificación de los factores de riesgo para enfermedad cardiovascular, se evidenció que los adolescentes presentaron probabilidades de desarrollar alguna enfermedad cardiovascular hacia el futuro, dado el comportamiento de los factores de riesgo, como son la obesidad y el sedentarismo. En cuanto a la relación entre la capacidad de agencia de autocuidado y los factores de riesgo, se encontró asociación significativa al relacionar la capacidad de agencia de autocuidado con las categorías de clasificación de la presión arterial. Conclusiones: Los resultados encontrados en el presente estudio coinciden con lo hallado por otros investigadores que afirman que el sedentarismo y la obesidad son los factores de riesgo con mayor presencia en los adolescentes. De igual manera, los hallazgos indican que los adolescentes mostraron capacidad de agencia de autocuidado de nivel medio, pero sólo se encontró asociaci

  1. Control for nuclear reactor

    International Nuclear Information System (INIS)

    Ash, E.B.; Bernath, L.; Facha, J.V.

    1980-01-01

    A nuclear reactor is provided with several hydraulically-supported spherical bodies having a high neutron absorption cross section, which fall by gravity into the core region of the reactor when the flow of supporting fluid is shut off. (auth)

  2. Nuclear export controls and nuclear safeguards

    International Nuclear Information System (INIS)

    Sevini, F.

    2013-01-01

    The export control of dual use goods has developed since the early seventies to counter nuclear proliferation. The paper provides an overview of dual-use export control issues also in relation with the Additional Protocol to the Comprehensive Safeguards Agreement, which requires States to provide declarations of the export of the controlled items listed in its Annex II, derived from the Nuclear Suppliers Group Trigger list. Recommendations for improvement are proposed. On the EU level, the paper summarises the framework set by the European Council Regulation 428/2009, requiring Member States to impose control on exports, brokering and transit of dual use goods. The Regulation includes the so-called 'EU dual-use control list' integrating the lists of dual-use items defined by the international regimes and requires also the control on intangible technology transfers as foreseen by U.N. Security Council Resolution 1540. ESARDA has recently launched a new sub-Working Group on export control, which raised large interest and may evolve to a full-fledged working group. Export control may provide an opportunity of technical collaboration between ESARDA and INMM. The paper is followed by the slides of the presentation. (author)

  3. Nuclear material control in Spain

    International Nuclear Information System (INIS)

    Velilla, A.

    1988-01-01

    A general view about the safeguards activities in Spain is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreements signed by Spain are presented and the facilities and nuclear materials under these agreements are listed. (E.G.) [pt

  4. Nuclear material control in Brazil

    International Nuclear Information System (INIS)

    Marzo, M.A.S.; Iskin, M.C.L.; Palhares, L.C.; Almeida, S.G. de.

    1988-01-01

    A general view about the safeguards activities in Brazil is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreements signed by Brazil are presented, the facilities and nuclear material under these agreements are listed, and the dificulties on the pratical implementation are discussed. (E.G.) [pt

  5. Controlled Nuclear Fusion.

    Science.gov (United States)

    Glasstone, Samuel

    This publication is one of a series of information booklets for the general public published by The United States Atomic Energy Commission. Among the topics discussed are: Importance of Fusion Energy; Conditions for Nuclear Fusion; Thermonuclear Reactions in Plasmas; Plasma Confinement by Magnetic Fields; Experiments With Plasmas; High-Temperature…

  6. International control of nuclear materials

    International Nuclear Information System (INIS)

    Koponen, Hannu

    1989-01-01

    Nuclear materials are subject to both national and international safeguards control. The International Atomic Energy Agency (IAEA) takes care of the international safeguards control. The control activities, which are discussed in this article, are carried out according to the agreements between various countries and the IAEA

  7. Nuclear safeguards and export controls

    International Nuclear Information System (INIS)

    Mueller, H.

    1994-01-01

    Precisely from the perspective of the two most important nonnuclear weapons states, Japan and Germany, the safeguards and arms control agendas have not been finally dealt with. Because of their central position in the nonproliferation regime as nuclear suppliers and states with large nuclear energy industries, both countries are compelled to take a leading role in pursuing future reforms. In the dialogue with the nonaligned, this leadership position is helped by their nonnuclear status. In fact, Japan and Germany have some interests in common with the nonaligned states, such as the expansion of safeguards in the nuclear weapons states. To be sure, both Japan and Germany will pursue such interests with due regard to the interests of their friends and allies. For Japan, maintaining a close relationship with the United States is as important as shaping viable relations with China. Initiatives and controversies on nuclear policy must be weighed against this interest. By the same token, Germany must take into account the dense network of relations with its allies and with Russia, in addition to the German-French friendship. This will always set limits to Germany's readiness to confront the nuclear weapons states on nuclear issues. This, however, does not mean that both countries must shut up when the P 5 speak. The nuclear weapons register and the extension of the ''erga omnes'' rule in export controls, for example, should not be relegated to the dustbin of history, just because some friendly nuclear powers don't like these ideas. (orig.)

  8. Retención de clientes en agencias de eventos

    Directory of Open Access Journals (Sweden)

    Claudia Gómez-Ramírez

    2011-01-01

    Full Text Available Como componente de la mezcla de comunicación efectiva para las marcas se encuentran los "Eventos", que hoy en día exigen una gestión estratégica. Resulta clave, para las organizaciones especializadas en la prestación de este servicio, aplicar herramientas que les permitan ser competitivas a largo plazo gracias a la diferenciación. Para ello, el CESA ha estudiado la relación cliente-agencia de comunicación de marketing, fundamentalmente respecto a la importancia de la retención de clientes en relaciones B2B, como las que se llevan a cabo entre agencias de eventos y sus clientes. En el presente artículo se exponen los principales hallazgos de una investigación de tipo exploratorio acerca del tema de retención de clientes, que incluye perfiles, elementos claves para la satisfacción y factores relevantes de la relación clienteagencia de eventos como elementos fundamentales de la gestión empresarial. Al tener un mayor conocimiento del perfil de los clientes, las agencias podrán ser más productivas y competitivas, pues estarán en capacidad de ofrecer iniciativas de servicios con características particulares.

  9. Nuclear reactor control apparatus

    International Nuclear Information System (INIS)

    Sridhar, B.N.

    1983-01-01

    Nuclear reactor safety rod release apparatus comprises a ring which carries detents normally positioned in an annular recess in outer side of the rod, the ring being held against the lower end of a drive shaft by magnetic force exerted by a solenoid carried by the drive shaft. When the solenoid is de-energized, the detent-carrying ring drops until the detents contact a cam surface associated with the lower end of the drive shaft, at which point the detents are cammed out of the recess in the safety rod to release the rod from the drive shaft. In preferred embodiments of the invention, an additional latch is provided to release a lower portion of a safety rod under conditions that may interfere with movement of the entire rod

  10. The control of nuclear sector

    International Nuclear Information System (INIS)

    2007-01-01

    The Asn is loaded with the control of the nuclear safety and the radiation protection in France: it provides this control, in the name of the state, to protect the workers, the patients, the public and the environment of the risks in relation with nuclear activities. The control is the core business of Asn. Asn so checks the nuclear basic installations (I.N.B.), since their conception until their dismantling, the pressure equipment specially conceived for these installations, the management of the radioactive waste as well as the transport of radioactive substances. Asn also checks all the industrial and research installations as well as the hospitals where are used ionizing radiations. It is a more recent profession there, because dating the reform of the control of the nuclear power of 2002, which constitutes that of the radiation protection. The first responsibility of the activities at risks falls to the one who begins them. This principle applies to all the sectors checked by Asn: an industrialist is responsible for the safety of the nuclear installations which he exploits, a doctor is responsible for the use of the ionizing radiations which he uses. (N.C.)

  11. Technique of nuclear reactors controls

    International Nuclear Information System (INIS)

    Weill, J.

    1953-12-01

    This report deal about 'Techniques of control of the nuclear reactors' in the goal to achieve the control of natural uranium reactors and especially the one of Saclay. This work is mainly about the measurement into nuclear parameters and go further in the measurement of thermodynamic variables,etc... putting in relief the new features required on behalf of the detectors because of their use in the thermal neutrons flux. In the domain of nuclear measurement, we indicate the realizations and the results obtained with thermal neutron detectors and for the measurement of ionizations currents. We also treat the technical problem of the start-up of a reactor and of the reactivity measurement. We give the necessary details for the comprehension of all essential diagrams and plans put on, in particular, for the reactor of Saclay. (author) [fr

  12. Nuclear physicist, arms control advocate

    CERN Multimedia

    Chang, K

    2002-01-01

    Victor F. Weisskopf, a nuclear physicist who worked on the Manhattan Project to build the first atomic bomb in World War II and later became an ardent advocate of arms control, died Monday at his home in Newton, MA, USA. He was 93 (1 page).

  13. Nuclear reactor kinetics and control

    International Nuclear Information System (INIS)

    Lewins, J.

    1978-01-01

    A consistent, integrated account of modern developments in the study of nuclear reactor kinetics and the problem of their efficient and safe control. It aims to prepare the student for advanced study and research or practical work in the field. Special features include treatments of noise theory, reliability theory and safety related studies. It covers all aspects of the operation and control of nuclear reactors, power and research and is complete in providing physical data methods of calculation and solution including questions of equipment reliability. The work uses illustrations of the main types of reactors in use in the UK, USA and Europe. Each chapter contains problems and worked examples suitable for course work and study. The subject is covered in chapters, entitled: introductory review; neutron and precursor equations; elementary solutions at low power; linear reactor process dynamics with feedback; power reactor control systems; fluctuations and reactor noise; safety and reliability; nonlinear systems (safety and control); analogue computing. (author)

  14. Controlled nuclear fusion apparatus

    International Nuclear Information System (INIS)

    Bussard, R.W.; Coppi, B.

    1982-01-01

    A fusion power generating device is disclosed having a relatively small and inexpensive core region which may be contained within an energy absorbing blanket region. The fusion power core region contains apparatus of the toroidal type for confining a high density plasma. The fusion power core is removable from the blanket region and may be disposed and/or recycled for subsequent use within the same blanket region. Thermonuclear ignition of the plasma is obtained by feeding neutral fusible gas into the plasma in a controlled manner such that charged particle heating produced by the fusion reaction is utilized to bootstrap the device to a region of high temperatures and high densities wherein charged particle heating is sufficient to overcome radiation and thermal conductivity losses. The high density plasma produces a large radiation and particle flux on the first wall of the plasma core region thereby necessitating replacement of the core from the blanket region from time to time. A series of potentially disposable and replaceable central core regions are disclosed for a large-scale economical electrical power generating plant

  15. Nuclear reactor control room construction

    International Nuclear Information System (INIS)

    Lamuro, R.C.; Orr, R.

    1993-01-01

    A control room for a nuclear plant is disclosed. In the control room, objects labelled 12, 20, 22, 26, 30 in the drawing are no less than four inches from walls labelled 10.2. A ceiling contains cooling fins that extend downwards toward the floor from metal plates. A concrete slab is poured over the plates. Studs are welded to the plates and are encased in the concrete. 6 figures

  16. Advanced nuclear plant control complex

    International Nuclear Information System (INIS)

    Scarola, K.; Jamison, S.; Manazir, R.M.; Rescorl, R.L.; Harmon, D.L.

    1991-01-01

    An advanced control room complex for a nuclear power plant, including a discrete indicator and alarm system which is nuclear qualified for rapid response to changes in plant parameters and a component control system which together provide a discrete monitoring and control capability at a panel in the control room. A separate data processing system, which need not be nuclear qualified, provides integrated and overview information to the control room and to each panel, through CRTs and a large, overhead integrated process status overview board. The discrete indicator and alarm system and the data processing system receive inputs from common plant sensors and validate the sensor outputs to arrive at a representative value of the parameter for use by the operator during both normal and accidental conditions, thereby avoiding the need for him to assimilate data from each sensor individually. The integrated process status board is at the apex of an information hierarchy that extends through four levels and provides access at each panel to the full display hierarchy. The control room panels are preferably of a modular construction, permitting the definition of inputs and outputs, the man machine interface, and the plant specific algorithms, to proceed in parallel with the fabrication of the panels, the installation of the equipment and the generic testing thereof. (author)

  17. Control of Nuclear Materials and Special Equipment (Nuclear Safety Regulations)

    International Nuclear Information System (INIS)

    Cizmek, A.; Prah, M.; Medakovic, S.; Ilijas, B.

    2008-01-01

    Based on Nuclear Safety Act (OG 173/03) the State Office for Nuclear Safety (SONS) in 2008 adopted beside Ordinance on performing nuclear activities (OG 74/06) and Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety (OG 74/06) the new Ordinance on the control of nuclear material and special equipment (OG 15/08). Ordinance on the control of nuclear material and special equipment lays down the list of nuclear materials and special equipment as well as of nuclear activities covered by the system of control of production of special equipment and non-nuclear material, the procedure for notifying the intention to and filing the application for a license to carry out nuclear activities, and the format and contents of the forms for doing so. This Ordinance also lays down the manner in which nuclear material records have to be kept, the procedure for notifying the State administration organization (regulatory body) responsible for nuclear safety by the nuclear material user, and the keeping of registers of nuclear activities, nuclear material and special equipment by the State administration organization (regulatory body) responsible for nuclear safety, as well as the form and content of official nuclear safety inspector identification card and badge.(author)

  18. Escala Para Medir Agencia Personal y Empoderamiento (ESAGE)

    OpenAIRE

    Susan Pick; Jenna Sirkin; Isaac Ortega; Pavel Osorio; Rocío Martínez; Ulises Xocolotzin; Martha Givaudan

    2007-01-01

    Existe en la literatura una discusión muy extensa, aunque no siempre clara, acerca de la importancia del desarrollo humano. Por ello es necesario contar con las capacidades que permitan fomentar su crecimiento y sustentabilidad. Los conceptos de agencia personal y empoderamiento son centrales en esta discusión. La distinción entre ambos no siempre ha sido clara. De hecho, muchas veces se usan indistintamente. Con base en la experiencia empírica de diseñar, implementar y evaluar pr...

  19. Nuclear power hazard control policy

    Energy Technology Data Exchange (ETDEWEB)

    Chicken, J C

    1982-01-01

    This study presents an analysis of the factors that appear to have influenced the formation and form of nuclear power hazard control policy in Britain. A simple account is given of the technical nature of nuclear hazards and of the legal and administrative framework that has been constructed to control them. The subsequent analysis concentrates primarily on the influence exerted by social and political factors. Particular attention is directed to those political groups which have developed a special interest in the problems of nuclear power, and to the interplay between organised groupings and public opinion generally. The metamorphosis of these groupings is traced from the origins of the nuclear industry in the Second World War to their prominent role during the Windscale Inquiry. Attention is given to the policy constraint imposed by increased expectations in the form of demands for higher standards of living, and improvements in the quality of the environment. The study is concerned with both policy-making and with policy implementation; with interest articulation as well as with the functioning of formal institutions. The evolution of policy takes place in an atmosphere of keen economic debate and conflicting moral perceptions. A model of the policy-making system is postulated.

  20. Nuclear power hazard control policy

    International Nuclear Information System (INIS)

    Chicken, J.C.

    1982-01-01

    This study presents an analysis of the factors that appear to have influenced the formation and form of nuclear power hazard control policy in Britain. A simple account is given of the technical nature of nuclear hazards and of the legal and administrative framework that has been constructed to control them. The subsequent analysis concentrates primarily on the influence exerted by social and political factors. Particular attention is directed to those political groups which have developed a special interest in the problems of nuclear power, and to the interplay between organised groupings and public opinion generally. The metamorphosis of these groupings is traced from the origins of the nuclear industry in the Second World War to their prominent role during the Windscale Inquiry. Attention is given to the policy constraint imposed by increased expectations in the form of demands for higher standards of living, and improvements in the quality of the environment. The study is concerned with both policy-making and with policy implementation; with interest articulation as well as with the functioning of formal institutions. The evolution of policy takes place in an atmosphere of keen economic debate and conflicting moral perceptions. A model of the policy-making system is postulated. (author)

  1. Radiosanitary control in nuclear medicine

    International Nuclear Information System (INIS)

    Degrossi, O.J.

    1987-01-01

    Nuclear Medicine has recently modified radiosanitary control standards for the three sectors involved: patients, personnel and general population. Nuclear Medicine does not constitute an important source of radiation, including patients and population, compared with radiology. The basic problems of radiosanitary controls are: the absorbed dose and the patient. Low risk deferred stochastic effects may appear with correct use of these controls. On the other hand, risk of stochastic consequences and non stochastic complications appear with incorrect applications. The following aspects should be considered for correct uses: A-1- The critical organ, which is not always the one under study. 2-The rest of the organism, specially the more sensitive organs. B- The radiopharmaceutical used, considering the following periods: physical, biological and effective. C-Technical and human resources that include quality control for the equipment. Radiosanitary control aims at a common objetive: dose limitation to the patient, personnel and general population. For this, it is necessary to accomplish the training programme for proffesional and technical personnel about quality control and to stablish basic standards for the equipment. Current law and regulations assign to the National Atomic Energy Comission the responsibility for controlling the use of radioisotopes and radiations in order to safeguard the health and life of the population. (M.E.L.) [es

  2. Control rod drive of nuclear reactor

    International Nuclear Information System (INIS)

    Zhuchkov, I.I.; Gorjunov, V.S.; Zaitsev, B.I.

    1980-01-01

    This invention relates to nuclear reactors and, more particularly, to a drive of a control rod of a nuclear reactor and allows power control, excess reactivity compensation, and emergency shut-down of a reactor. (author)

  3. Development and evaluation of Standard Operating Procedures (SOPs) for quality control tests and radiological protection activities in a Nuclear Medicine Service

    Energy Technology Data Exchange (ETDEWEB)

    Krempser, Alexandre R., E-mail: krempser@peb.ufrj.br [Universidade Federal do Rio de Janeiro (PEB/COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Biomedica; Soares, Alexandre B. [Universidade Federal do Rio de Janeiro (IF/UFRJ), Rio de Janeiro, RJ (Brazil). Inst. de Fisica; Corbo, Rossana [Universidade Federal do Rio de Janeiro (FM/UFRJ), Rio de Janeiro, RJ (Brazil). Dept. de Radiologia

    2011-07-01

    The quality management in Nuclear Medicine Services is a requirement of national and international standards. The Brazilian regulatory agency in health surveillance, the Agencia Nacional de Vigilancia Sanitaria (ANVISA), in its Resolucao de Diretoria Colegiada (Collegiate Directory Resolution) no. 38, requires the elaboration of documents describing the technical and clinical routine activities. This study aimed to elaborate, implement and evaluate Standard Operating Procedures (SOPs) for quality control tests and radiological protection activities in the Nuclear Medicine Service of a university hospital. Eighteen SOPs were developed, involving tasks related to dose calibrator, gamma camera, Geiger-Muller detectors and radiological protection activities. The performance of its application was evaluated for a period of six months. It was observed a reduction in 75% of reported operational errors and 42% of the number of reported incidents with contamination by radioactive material. The SOPs were adequate and successful in its application. New procedures involving clinical activities will also be developed and evaluated. (author)

  4. Quality control in nuclear medicine

    International Nuclear Information System (INIS)

    Kostadinova, I.

    2007-01-01

    Nuclear medicine comprises diagnosis and therapy of the diseases with radiopharmaceuticals. The ambition of all specialists in our country is their activity to reach European standards. In this connection, a Commission for external audit was formed to evaluate the quality of work in the centers of nuclear medicine. This Commission create a long-lasting programme based on the objective European criteria and the national standard of nuclear medicine, having in mind to increase quality of the work and the expert evaluation of activity in every center. The program comprises measures for quality control of instrumentation, radiopharmaceuticals, performed investigations, obtained results and the whole organization from the receiving of the isotopes to the results of the patients. The ambition is most of the centers to fulfill the requirements. As a conclusion it could be said that not only the quality of everyday nuclear medicine work is enough to increase the prestige of the specialty. It is also necessary we to have understanding expert and financial support from corresponding institutions, incl. Ministry of health for a delivery of a new, contemporary instrumentation with new possibilities. Thus it would be possible Bulgarian patients to reach the high technology apparatuses for an early functional diagnosis of the diseases and optimal treatment, which possibility have the patients from the developed countries. (author)

  5. Whither the legal control of nuclear energy?

    International Nuclear Information System (INIS)

    Riley, Peter

    1995-01-01

    International nuclear trade is governed by the regime of legal control of nuclear energy, nuclear materials, knowledge of nuclear processes and weapons. Nuclear trade is under pinned by international agreements concerning physical protection and safeguards, the control of nuclear weapons, the protection of nuclear materials from terrorist action and third part liability. The political and geographical boundary changes of the past two years have significantly altered the background against which this regime has developed. Such changes have affected nuclear trade. The paper summarised the legal control of nuclear energy between States, identifies the areas of change which may affect this regime and the consequences for international trade. Conclusions are drawn as to the development of the international legal control of nuclear energy. (author). 21 refs

  6. Computer systems for nuclear installation data control

    International Nuclear Information System (INIS)

    1987-09-01

    The computer programs developed by Divisao de Instalacoes Nucleares (DIN) from Brazilian CNEN for data control on nuclear installations in Brazil are presented. The following computer programs are described: control of registered companies, control of industrial sources, irradiators and monitors; control of liable person; control of industry irregularities; for elaborating credence tests; for shielding analysis; control of waste refuge [pt

  7. Nuclear reactor power control device

    International Nuclear Information System (INIS)

    Koshi, Yuji; Sakata, Akira; Karatsu, Hiroyuki.

    1987-01-01

    Purpose: To control abrupt changes in neutron fluxes by feeding back a correction signal obtained from a deviation between neutron fluxes and heat fluxes for changing the reactor core flow rate to a recycling flow rate control system upon abrupt power change of a nuclear reactor. Constitution: In addition to important systems, that is, a reactor pressure control system and a recycling control system in the power control device of a BWR type power plant, a control circuit for feeding back a deviation between neutron fluxes and heat fluxes to a recycling flow rate control system is disposed. In the suppression circuit, a deviation signal is prepared in an adder from neutron flux and heat flux signals obtained through a primary delay filter. The deviation signal is passed through a dead band and an advance/delay filter into a correction signal, which is adapted to be fed back to the recycling flow rate control system. As a result, the reactor power control can be conducted smoothly and it is possible to effectively suppress the abrupt change or over shoot of the neutron fluxes and abrupt power change. (Kamimura, M.)

  8. Viscoelastic finite-element analysis of human skull - dura mater ...

    African Journals Online (AJOL)

    SERVER

    2008-03-18

    Mar 18, 2008 ... The elastic-viscous mechanical characteristics must be used for the skull. The viscous strains .... different actions for fresh human dura mater (L0 = 23 mm, θ = 370). f. Creep compliance .... 3180±300. 4026±372. *. 1. 0. E. E.

  9. Transformaciones performativas: agencia y vulnerabilidad en Judith Butler

    Directory of Open Access Journals (Sweden)

    Mónica Cano Abadía

    2015-02-01

    Full Text Available El objetivo de este artículo es analizar cómo la teoría de la performatividad de Judith Butler posibilita pensar la capacidad de acción y resistencia de los sujetos. Butler propone deconstruir la categoría de identidad a través de la performatividad, que nos permite pensarnos como sujetos en el límite, interdependientes y vulnerables. Al considerarnos como seres performativos y, además, vulnerables a nuestras interacciones tanto con el contexto como con las demás personas, todo cuestionamiento de las normas sociales que nos rodean llevarán irremediablemente a una transformación del propio yo. Esta transformación que comienza en nuestras propias identidades, conduce a otra manera de entender lo humano y a otra forma de plantear nuestras agencias políticas.

  10. ANÁLISIS DEL SECTOR DE LAS AGENCIAS DE VIAJES EN ESPAÑA: UNA APROXIMACIÓN DESDE LA CARACTERIZACIÓN DEL SECTOR ENTRE LAS AGENCIAS DE VIAJES TRADICIONALES Y LAS AGENCIAS DE VIAJES ONLINE

    OpenAIRE

    Luis Lacalle Muñoz; Verónica Baena Graciá; Alberto Moreno Melgarejo

    2013-01-01

    El sector de las agencias de viajes español está sufriendo en los últimos años una importantísima transformación. El número de agencias se ha visto reducido de manera drástica y la composición de la industria también se ha visto alterada. Por otra parte, cada vez es mayor el número de agencias online que desplazan a aquellas que realizan su labor de intermediación de una manera tradicional. No sólo en número sino también atendiendo a la cuota de mercado. El presente artículo además de present...

  11. Collagen-inspired self-assembling materals

    NARCIS (Netherlands)

    Skrzeszewska, P.J.

    2011-01-01

    The rapid increase of the quality of life together with the progress of medical science asks for the development of new, tuneable and controllable materials. For the same reason, materials used for biomedical applications have to be increasingly biocompatible, biodegradable and

  12. Collagen-inspired self-assembling materals

    OpenAIRE

    Skrzeszewska, P.J.

    2011-01-01

    The rapid increase of the quality of life together with the progress of medical science asks for the development of new, tuneable and controllable materials. For the same reason, materials used for biomedical applications have to be increasingly biocompatible, biodegradable and biofunctional. Most of the available systems, however, lack one property or the other. For example, conventional animal-derived gelatin that is often used in biomedicine, is susceptible to a risk of contamination wi...

  13. Emergency control centers for nuclear power plants

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Guidance is provided for the development and implementation of emergency control centers for nuclear power plants, including nuclear plant control room, nuclear plant company headquarters, emergency control center, and nuclear plant alternate emergency control center. Requirements and recommendations are presented for the mission, communications, instrumentation and equipment associated with each type of control center. Decisional aids, manning requirements and resources are also given; the decision aids cover both the accident assessment and protective action areas. Both normal and alternate means of communications are considered. Off-site emergency control centers, although not covered in the strict sense by this standard, are considered in an appendix

  14. Nuclear material control systems for nuclear power plants

    International Nuclear Information System (INIS)

    1975-06-01

    Paragraph 70.51(c) of 10 CFR Part 70 requires each licensee who is authorized to possess at any one time special nuclear material in a quantity exceeding one effective kilogram to establish, maintain, and follow written material control and accounting procedures that are sufficient to enable the licensee to account for the special nuclear material in his possession under license. While other paragraphs and sections of Part 70 provide specific requirements for nuclear material control systems for fuel cycle plants, such detailed requirements are not included for nuclear power reactors. This guide identifies elements acceptable to the NRC staff for a nuclear material control system for nuclear power reactors. (U.S.)

  15. Potential role for MATER in cytoplasmic lattice formation in murine oocytes.

    Directory of Open Access Journals (Sweden)

    Boram Kim

    2010-09-01

    Full Text Available Mater and Padi6 are maternal effect genes that are first expressed during oocyte growth and are required for embryonic development beyond the two-cell stage in the mouse. We have recently found that PADI6 localizes to, and is required for the formation of, abundant fibrillar Triton X-100 (Triton insoluble structures termed the oocyte cytoplasmic lattices (CPLs. Given their similar expression profiles and mutant mouse phenotypes, we have been testing the hypothesis that MATER also plays a role in CPL formation and/or function.Herein, we show that PADI6 and MATER co-localize throughout the oocyte cytoplasm following Triton extraction, suggesting that MATER co-localizes with PADI6 at the CPLs. Additionally, the solubility of PADI6 was dramatically increased in Mater(tm/tm oocytes following Triton extraction, suggesting that MATER is involved in CPL nucleation. This prediction is supported by transmission electron microscopic analysis of Mater(+/+ and Mater(tm/tm germinal vesicle stage oocytes which illustrated that volume fraction of CPLs was reduced by 90% in Mater(tm/tm oocytes compared to Mater(+/+ oocytes.Taken together, these results suggest that, similar to PADI6, MATER is also required for CPL formation. Given that PADI6 and MATER are essential for female fertility, these results not only strengthen the hypothesis that the lattices play a critical role in mediating events during the oocyte-to-embryo transition but also increase our understanding of the molecular nature of the CPLs.

  16. Protection and control of nuclear materials

    International Nuclear Information System (INIS)

    Jalouneix, J.; Winter, D.

    2007-01-01

    In the framework of the French regulation on nuclear materials possession, the first liability is the one of operators who have to know at any time the quantity, quality and localization of any nuclear material in their possession. This requires an organization of the follow up and of the inventory of these materials together with an efficient protection against theft or sabotage. The French organization foresees a control of the implementation of this regulation at nuclear facilities and during the transport of nuclear materials by the minister of industry with the sustain of the institute of radiation protection and nuclear safety (IRSN). This article presents this organization: 1 - protection against malevolence; 2 - national protection and control of nuclear materials: goals, administrative organization, legal and regulatory content (authorization, control, sanctions), nuclear materials protection inside facilities (physical protection, follow up and inventory, security studies), protection of nuclear material transports (physical protection, follow up), control of nuclear materials (inspection at facilities, control of nuclear material measurements, inspection of nuclear materials during transport); 3 - international commitments of France: non-proliferation treaty, EURATOM regulation, international convention on the physical protection of nuclear materials, enforcement in France. (J.S.)

  17. Environmental control for nuclear explosives

    Energy Technology Data Exchange (ETDEWEB)

    Lundberg, A W; Wells, W H [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

    1970-05-15

    Peaceful applications introduce some new environmental considerations into the design of nuclear explosives. Much of the experience gained in weapon work can be applied, but the requirement of survival in a very deep hole is not found in any military system. We will briefly mention the overall environment and make a few comparisons with some general characteristics of the weapon environment. The major portion of this paper is devoted to the special problems of pressure and temperature found in the emplacement environment. Potential users should know where we stand with regard to survival in hostile environments in terms of feasibility and possible effects on field operations. In all applications there are several things competing for the available diameter. Given that explosives can be made to work over a range of diameters and that necessary environmental control is feasible, all further discussions can be related to the cost of providing a hole big enough to accomplish the task. The items competing for diameter are: 1) bare nuclear assembly 2) insulation and cooling system if needed 3) pressure canister 4) shielding material 5) emplacement clearance All of these must be considered with the cost of the hole in optimizing an overall design. Conditions in a particular location will affect the shielding requirements and the emplacement clearance. The nuclear assembly can vary in size, but the long development time requires that decisions be made quite early, perhaps in ignorance of the economic details of a particular application. The pressure canister is a relatively straightforward design problem that can be resolved by giving appropriate consideration to all of the design requirements. In particular for 20,000 psi pressure in the emplacement hole, a canister of heat-treated alloy steel having a yield strength of 200,000 psi and a wall thickness which is about .07 times the outside diameter is adequate and straight- forward to fabricate. The insulation and cooling

  18. Fuzzy logic control of nuclear power plant

    International Nuclear Information System (INIS)

    Yao Liangzhong; Guo Renjun; Ma Changwen

    1996-01-01

    The main advantage of the fuzzy logic control is that the method does not require a detailed mathematical model of the object to be controlled. In this paper, the shortcomings and limitations of the model-based method in nuclear power plant control were presented, the theory of the fuzzy logic control was briefly introduced, and the applications of the fuzzy logic control technology in nuclear power plant controls were surveyed. Finally, the problems to be solved by using the fuzzy logic control in nuclear power plants were discussed

  19. ANÁLISIS DEL SECTOR DE LAS AGENCIAS DE VIAJES EN ESPAÑA: UNA APROXIMACIÓN DESDE LA CARACTERIZACIÓN DEL SECTOR ENTRE LAS AGENCIAS DE VIAJES TRADICIONALES Y LAS AGENCIAS DE VIAJES ONLINE

    Directory of Open Access Journals (Sweden)

    Luis Lacalle Muñoz

    2013-06-01

    Full Text Available El sector de las agencias de viajes español está sufriendo en los últimos años una importantísima transformación. El número de agencias se ha visto reducido de manera drástica y la composición de la industria también se ha visto alterada. Por otra parte, cada vez es mayor el número de agencias online que desplazan a aquellas que realizan su labor de intermediación de una manera tradicional. No sólo en número sino también atendiendo a la cuota de mercado. El presente artículo además de presentar una aproximación al criterio de división entre agencias tradicionales y online, ofrece una perspectiva de la actual composición y reciente evolución del sector.

  20. CAPACIDAD DE AGENCIA DE AUTOCUIDADO EN LAS PERSONAS ADULTAS QUE PADECEN ARTRITIS REUMATOIDE

    Directory of Open Access Journals (Sweden)

    Viriam Leiva Díaz

    2012-04-01

    Full Text Available El objetivo de la investigación consistió en analizar la capacidad de agencia de autocuidado que poseen laspersonas con diagnóstico de artritis reumatoide, quienes habitan en los cantones de Palmares y San Ramón. Se desarrolló una metodología de investigación cuantitativa de tipo descriptiva transversal. En cuanto a la población participante del estudio, estuvo conformada por 13 personas diagnosticadas con artritis reumatoide; respecto de los instrumentos utilizados para recolectar información, a los colaboradores se les aplicó el instrumento “Escala de apreciación de la capacidad de agencia de autocuidado”, propuesta por Dorothea Orem. Se determinó que los participantes poseen alta capacidad de agencia de autocuidado en las diferentes categorías, ya que únicamente se detectó baja capacidad de agencia de autocuidado en cuanto a interacción social (2 personas, y respecto del consumo insuficiente de alimentos (5 personas. La escala ASA permite a la Enfermera (o determinar la capacidad de agencia de autocuidado, de forma oportuna y eficaz. Además, permitió a las investigadoras observar un panorama general de las necesidades de autocuidado de la población participante y constatar que esta presenta alta capacidad de agencia de autocuidado.

  1. Nuclear reactor kinetics and plant control

    CERN Document Server

    Oka, Yoshiaki

    2013-01-01

    Understanding time-dependent behaviors of nuclear reactors and the methods of their control is essential to the operation and safety of nuclear power plants. This book provides graduate students, researchers, and engineers in nuclear engineering comprehensive information on both the fundamental theory of nuclear reactor kinetics and control and the state-of-the-art practice in actual plants, as well as the idea of how to bridge the two. The first part focuses on understanding fundamental nuclear kinetics. It introduces delayed neutrons, fission chain reactions, point kinetics theory, reactivit

  2. Annual report 2013 - ABACC - Brazilian-Argentina agency for accounting and control of nuclear materials; Relatorio anual 2013 - ABACC - Agencia Brasileiro-Argentina de Contabilidade e Controle de Materiais Nucleares

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-01

    The document reports the activities of the commission and all technical activities. Shows the presence of ABACC at events; the strengthening technical capability; technical cooperation, institutional and administrative and financial activities; an outlook for 2014. Gives a list of the ABACC inspectors and presents the facilities under the Quadripartite Agreement.

  3. Relación de agencia y monopolio. El caso del tabaco en España (1887-1986

    Directory of Open Access Journals (Sweden)

    Eva Chamorro

    2016-01-01

    Full Text Available Los análisis históricos contables permiten evidenciar, bajo el marco de la teoría de la agencia, los conflictos de intereses que se producen en una organización. Nuestro objetivo, con un estudio longitudinal, basado en fuentes primarias, es comprobar cómo se regula una relación de agencia a través de contratos formales, y el papel que asume la contabilidad. El caso en el que nos basamos, y que puede ser una importante contribución en ese sentido, es el del arrendamiento del monopolio estatal del tabaco a una empresa privada, desde el inicio de la gestión (1887 hasta que empieza a desaparecer esta actividad monopolística (1986. Nuestros hallazgos ponen de manifiesto que los contratos establecidos permiten un gran control del principal sobre el agente y que no se cumplen todas las condiciones que deben darse para considerarlos «un buen acuerdo contractual». Por otro lado, la contabilidad aparece como un instrumento clave para el control del Estado sobre las empresas arrendatarias. Nuestra principal conclusión es que el agente es quien asume mayor riesgo en el arrendamiento, y el principal mantiene un comportamiento oportunista durante todo el periodo, lo que contradice los planteamientos más generalizados de la teoría y permite relajar sus asunciones iniciales.

  4. Croatian National System of Nuclear Materials Control

    International Nuclear Information System (INIS)

    Biscan, R.

    1998-01-01

    In the process of economic and technological development of Croatia by using or introducing nuclear power or in the case of international co-operation in the field of peaceful nuclear activities, including international exchange of nuclear material, Croatia should establish and implement National System of Nuclear Materials Control. Croatian National System of accounting for and control of all nuclear material will be subjected to safeguards under requirements of Agreement and Additional Protocol between the Republic of Croatia and the International Atomic Energy Agency (IAEA) for the Application of Safeguards in Connection with the Treaty on the Non-Proliferation of Nuclear Weapons (NPT). The decision by NPT parties at the 1995 NPT Review and Extension Conference to endorse the Fullscope IAEA Safeguards Standard (FSS) as a necessary precondition of nuclear supply means that states are obliged to ensure that the recipient country has a FSS agreement in place before any nuclear transfer can take place (Ref. 1). The FSS standard of nuclear supply is a central element of the Nuclear Suppliers Group (NSG) Guidelines which the NSG adopted in 1992 and should be applied to members and non-members of the NSG. The FSS standard of nuclear supply in general allows for NPT parties or countries which have undertaken the same obligations through other treaty arrangements, to receive favourable treatment in nuclear supply arrangements. However, the Iraqi experience demonstrate that trade in nuclear and dual-use items, if not properly monitored, can contribute to a nuclear weapons program in countries acting contrary to their non-proliferation obligation. Multilateral nuclear export control mechanisms, including the FSS supply standard, provide the basis for co-ordination and standardisation of export control measures. (author)

  5. Complete automation of nuclear reactors control

    International Nuclear Information System (INIS)

    Weill, J.

    1955-01-01

    The use of nuclear reactor for energy production induces the installation of automatic control systems which need to be safe enough and can adapt to the industrial scale of energy production. These automatic control systems have to insure the constancy of power level and adjust the power produced to the energy demand. Two functioning modes are considered: nuclear plant connected up to other electric production systems as hydraulic or thermic plants or nuclear plants functioning on an independent network. For nuclear plants connected up with other production plants, xenon poisoning and operating cost lead to keep working at maximum power the nuclear reactors. Thus, the power modulation control system will not be considered and only start-up control, safety control, and control systems will be automated. For nuclear power plants working on an independent network, the power modulation control system is needed to economize fuel. It described the automated control system for reactors functioning with constant power: a power measurement system constituted of an ionization chamber and a direct-current amplifier will control the steadfastness of the power produced. For reactors functioning with variable power, the automated power control system will allow to change the power and maintain it steady with all the necessary safety and will control that working conditions under P max and R max (maximum power and maximum reactivity). The effects of temperature and xenon poisoning will also be discussed. Safety systems will be added to stop completely the functioning of the reactor if P max is reached. (M.P.)

  6. Matere z motnjami v duševnem razvoju

    OpenAIRE

    Kolarič, Sandra

    2015-01-01

    S pregledom tuje literature in že opravljenih raziskav v tujini smo v teoretičnem delu magistrske naloge zajeli značilnosti mater z motnjami v duševnem razvoju, dejavnike, ki vplivajo na uspešnost opravljanja materinske vloge, ter pravice oseb z motnjami v duševnem razvoju do starševstva, v povezavi z zakonodajo na slovenskem. Navedli smo vzroke za omejevanje reprodukcije pri ženskah z motnjami v duševnem razvoju in problematiko odvzema skrbništva materam z motnjami v duševnem razvoju nad otr...

  7. The NPT and nuclear export controls

    International Nuclear Information System (INIS)

    Berkhout, F.

    1992-01-01

    Controls on the export of nuclear materials and technology were originally imposed in wartime and under the United States Atomic Energy Act of 1946 to restrict the supply of uranium. But there was no international agreement until the mid 1960s; before that the United States, Canada, France and the Soviet Union imposed export controls on a national basis. The Non-Proliferation Treaty, especially Articles I-IV, set out the first world wide controls on the nuclear trade. These articles are explained in the context of the relevant Committees (the Zangger Committee, the Committee on the Assurance of Supply, the National Export Committee and the Coordinating Committee for Multilateral Export Control) and Guidelines (the Nuclear Suppliers Guidelines and the International Nuclear Fuel Cycle Evaluation). Recent developments which have a bearing on nuclear trade, such as the single European market, the emergence of new supplies and the break-up of the Soviet Union, are considered. (UK)

  8. Modelling the distribution of 90Sr and 137Cs in the Mediterranean Sea (MTPII-MATER)

    International Nuclear Information System (INIS)

    Sanchez-Cabeza, J.A.; Ortega, M.; Fernandez, V.; Tintore, J.; Monaco, A.

    1999-01-01

    Within the frame of the MTPII-MATER project (MAST), the distribution of 90 Sr and 137 Cs in the Mediterranean Sea was modelled, as these radionuclides are useful tracers of water circulation. The Mediterranean Sea was divided into 81 boxes, corresponding to 21 regions, taking into account water mass circulation, bathymetry and data availability. Transfer rates were obtained from the MOM model run under MEDMEX conditions. The model was run with realistic inputs, which included weapons global fallout, Chernobyl 137 Cs, nuclear industry and river runoff. It was observed that existing data are scarce, especially in the eastern Mediterranean. In general, model predictions agreed well with observations, showing maximum concentrations in surface waters and maxima due to global fallout ( 137 Cs and 90 Sr) and to the Chernobyl accident ( 137 Cs only). (author)

  9. Control panel handling of a nuclear simulator

    International Nuclear Information System (INIS)

    Martin Polo, F.; Jimenez Fraustro, L.A.; Banuelos Galindo, A.; Diamant Rubinstein, A.

    1985-01-01

    The handling of the control panels for a Nuclear Simulator for operating training is described. The control panels are handled by a set of intelligent controllers, each with at least two processors (8035 - Communications Controller and a 8085 - Master processor). The Controllers are connected to the main computers (Two dual processor Gould concept 32/6780 and a single processor Gould concept 32/6705) via serial asynchronous channels in a multidrop, star-like architecture. The controllers transmit to the main computers only the changes detected and receive the whole set of output variables as computed by the mathematical models of the Nuclear Plant

  10. Análise de práticas contabilísticas na antiga civilização mesopotâmica = Analysis of accounting practices in the former mesopotamian Civilization

    Directory of Open Access Journals (Sweden)

    Miguel Gonçalves

    2010-01-01

    Full Text Available Constitui um facto perfeitamente verificável que nas últimas décadas se tem vindo a dedicar umaatenção crescente a trabalhos em História da Contabilidade. Antes dos estudos consideradoshoje como fazendo parte da Nova História da Contabilidade, os historiadores da nossa disciplinaconsagraram as suas investigações a aspectos relacionados com a origem e os processosevolutivos da Contabilidade, particularmente no que toca ao exame de práticas contabilísticas emcivilizações antigas. Com base na revisão da literatura de autores não-contabilísticos econtabilísticos (principalmente aqueles que se podem classificar como historiadoresconvencionais da Contabilidade, a questão magna que versamos neste trabalho respeita ànarração resumida de algumas técnicas contabilísticas praticadas no seio da mais antigacivilização da humanidade - a Mesopotâmia.It is a perfectly verifiable fact that in recent decades increasing attention has been devoting to works inAccounting History. Before studies considered today as part of the New Accounting History, historiansof our discipline dedicated their research to aspects on the origin and evolutionary processes ofAccounting, particularly with regard to the examination of accounting practices in ancient civilizations.Based on the review of the literature of non-accounting and Accounting authors, mainly those that canbe classified as conventional Accounting historians, the broader issue discussed in this work thusrelates to the narrative summary of some accounting techniques practiced within the most ancientcivilization of mankind - Mesopotamia.

  11. Challenges to nuclear export controls today

    International Nuclear Information System (INIS)

    Chatelus, R.; Sevini, F.; Janssens, W.; Michel, Q.

    2014-01-01

    Nuclear energy and nuclear proliferation programs are potentially inter-twinned, which is a point to be taken into account when analysing the development of civil nuclear energy, both domestically and as foreign investment. International agreements ensure that the adhering countries fulfil their obligations and do not abuse civil nuclear programs for the production of nuclear weapons. Uranium enrichment is the process currently most focused on in this respect by recent news and recent technological and commercial developments. But also the so-called reactor-based pathway, with extraction of plutonium from spent nuclear fuel by reprocessing remains in the spotlight of inspectors. Two of the main and complementary pillars on which the prevention of such diversion relies, are Strategic Export Control and International Safeguards. Strategic export control is a key barrier against nuclear proliferation. In many countries including the EU, it is set by a legal framework, envisaging implementation, enforcement and prosecution. The goods that can exported only with authorisations are those identified by the international export control regimes; primarily the Nuclear Suppliers Group in the case of nuclear items. It is complemented by nuclear safeguards measures, and especially in the past few years, by the IAEA State Level concept, which looks at the overall country's potential, including its industrial structure to derive conclusions on the absence of undeclared activities. However, the strict control of goods and knowledge is a moving target, since technological developments, globalisation and the intensifying exchange of information via the worldwide web offer increasing opportunities to proliferators to acquire sensitive items and competencies, and create bigger challenges to enforcement, calling for new responses. Research and development programmes must be directed towards supporting the adaptation of current proliferation containment systems to these new

  12. Measurement control program for nuclear material accounting

    International Nuclear Information System (INIS)

    Brouns, R.J.; Roberts, F.P.; Merrill, J.A.; Brown, W.B.

    1980-06-01

    A measurement control program for nuclear material accounting monitors and controls the quality of the measurments of special nuclear material that are involved in material balances. The quality is monitored by collecting data from which the current precision and accuracy of measurements can be evaluated. The quality is controlled by evaluations, reviews, and other administrative measures for control of selection or design of facilities, equipment and measurement methods and the training and qualification of personnel who perform SNM measurements. This report describes the most important elements of a program by which management can monitor and control measurement quality

  13. National Nuclear Management and Control Agency (NNCA)

    International Nuclear Information System (INIS)

    Yoon, Wan Ki

    2006-01-01

    The National Nuclear Management and Control Agency (NNCA) is an independent agency for safeguards and material control for nuclear activities in the Republic of Korea. Formerly subordinate to the Korea Atomic Energy Research Institute (KAERI), it is temporarily associated with the Korea Institute of Nuclear Safety (KINS). In mid-2006 it will become fully independent. The NNCA is responsible for safeguards within the ROK, cooperates with the IAEA, and supports technical needs of the Ministry of Science and Technology (MOST). In addition, it has responsibilities in export controls and physical protection. In the future the NNCA expects to become a national 'think tank' for nuclear control and nonproliferation issues. This presentation enumerated the many responsibilities of the NNCA and explained the structure and staffing of the organization. (author)

  14. Ética policial: una aproximación desde la agencia*

    Directory of Open Access Journals (Sweden)

    Nidian Johana Sanabria Cárdena

    2012-07-01

    Full Text Available El presente texto se propone mostrar la posibilidad de la agencia desde un curso de ética en el marco de la formación ejecutiva del cuerpo policial. Se partede los avances logrados en las discusiones sobre el concepto de agencia, en particular en la sociología norteamericana. Seguido, se procede a presentar las prácticas desarrolladas con los estudiantes, con el propósito de sugerir posibilidades para dicha agencia desde sí mismos. Y finalmente, se reflexiona sobre las posibilidades de que esta propuesta pueda resultar útil en el desarrollo institucional de la Policía Nacional de Colombia.

  15. Development of nuclear material accountancy control system

    International Nuclear Information System (INIS)

    Hirosawa, Naonori; Kashima, Sadamitsu; Akiba, Mitsunori

    1992-01-01

    PNC is developing a wide area of nuclear fuel cycle. Therefore, much nuclear material with a various form exists at each facility in the Works, and the controls of the inventory changes and the physical inventories of nuclear material are important. Nuclear material accountancy is a basic measure in safeguards system based on Non-Proliferation Treaty (NPT). In the light of such importance of material accountancy, the data base of nuclear material control and the material accountancy report system for all facilities has been developed by using the computer. By this system, accountancy report to STA is being presented certainly and timely. Property management and rapid corresponding to various inquiries can be carried out by the data base system which has free item searching procedure. (author)

  16. O Goodwill e o seu tratamento contabilístico pós adoção das IFRS: uma análise nas empresas da Euronext Lisbon

    OpenAIRE

    Carvalho, Carla

    2015-01-01

    Esta tese tem como objetivo geral a análise do tratamento contabilístico do goodwill adquirido no âmbito das Concentrações de Atividades Empresariais (CAE). Para o efeito, adotamos uma trilogia de estudos acerca do goodwill: seu reconhecimento inicial, sua mensuração subsequente e seus requisitos de divulgação. Cada um deles deu origem a um ensaio. Para a realização dos estudos empíricos incluídos em cada um dos ensaios, foram utilizadas as informações das entidades com valores...

  17. Automatic control of nuclear power plants

    International Nuclear Information System (INIS)

    Jover, P.

    1976-01-01

    The fundamental concepts in automatic control are surveyed, and the purpose of the automatic control of pressurized water reactors is given. The response characteristics for the main components are then studied and block diagrams are given for the main control loops (turbine, steam generator, and nuclear reactors) [fr

  18. Technical Cybersecurity Controls for Nuclear Facilities

    International Nuclear Information System (INIS)

    Oh, Jinseok; Ryou, Jaecheol; Kim, Youngmi; Jeong, Choonghei

    2014-01-01

    To strengthen cybersecurity for nuclear facilities, many countries take a regulatory approach. For example, US Government issued several regulations . Title 10, of the Code of Federal Regulations, Section 73.54, 'Protection of Digital Computer and Communication Systems and Networks (10 CFR 73.54) for cybersecurity requirements and Regulatory Guide 5.71 (RG. 5.71) for cybersecurity guidance and so on. In the case of Korea, Korean Government issued '8.22 Cybersecurity of I and C systems (KINS/RG-NO8.22). In particular, Reg. 5.71 provides a list of security controls to address the potential cyber risks to a nuclear facilities. Implementing and adopting security controls, we can improve the level of cybersecurity for nuclear facilities. RG 5.71 follows the recommendation of NIST SP 800-53. NIST standard provides security controls for IT systems. And NRC staff tailored the controls in NIST standards to unique environments of nuclear facilities. In this paper, we are going to analysis and compare NRC RG 5.71 and NIST SP800-53, in particular, for technical security controls. If RG 5.71 omits the specific security control that is included in SP800-53, we would review that omitting is adequate or not. If RG 5.71 includes the specific security control that is not included in SP800-53, we would also review the rationale. And we are going to some security controls to strengthen cybersecurity of nuclear facilities. In this paper, we compared and analyzed of two regulation in technical security controls. RG 5.71 that is based on NIST standard provides well-understood security controls for nuclear facility. But some omitting from NIST standard can threaten security state of nuclear facility

  19. Technical Cybersecurity Controls for Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Jinseok; Ryou, Jaecheol [Chungnam National Univ., Daejeon (Korea, Republic of); Kim, Youngmi; Jeong, Choonghei [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-05-15

    To strengthen cybersecurity for nuclear facilities, many countries take a regulatory approach. For example, US Government issued several regulations . Title 10, of the Code of Federal Regulations, Section 73.54, 'Protection of Digital Computer and Communication Systems and Networks (10 CFR 73.54) for cybersecurity requirements and Regulatory Guide 5.71 (RG. 5.71) for cybersecurity guidance and so on. In the case of Korea, Korean Government issued '8.22 Cybersecurity of I and C systems (KINS/RG-NO8.22). In particular, Reg. 5.71 provides a list of security controls to address the potential cyber risks to a nuclear facilities. Implementing and adopting security controls, we can improve the level of cybersecurity for nuclear facilities. RG 5.71 follows the recommendation of NIST SP 800-53. NIST standard provides security controls for IT systems. And NRC staff tailored the controls in NIST standards to unique environments of nuclear facilities. In this paper, we are going to analysis and compare NRC RG 5.71 and NIST SP800-53, in particular, for technical security controls. If RG 5.71 omits the specific security control that is included in SP800-53, we would review that omitting is adequate or not. If RG 5.71 includes the specific security control that is not included in SP800-53, we would also review the rationale. And we are going to some security controls to strengthen cybersecurity of nuclear facilities. In this paper, we compared and analyzed of two regulation in technical security controls. RG 5.71 that is based on NIST standard provides well-understood security controls for nuclear facility. But some omitting from NIST standard can threaten security state of nuclear facility.

  20. Operation control device for nuclear power plants

    International Nuclear Information System (INIS)

    Suto, Osamu.

    1982-01-01

    Purpose: To render the controlling functions of a central control console more centralized by constituting the operation controls for a nuclear power plant with computer systems having substantially independent functions such as those of plant monitor controls, reactor monitor management and CRT display and decreasing interactions between each of the systems. Constitution: An input/output device for the input of process data for a nuclear power plant and indication data for a plant control console is connected to a plant supervisory and control computer system and a display computer system, the plant supervisory control computer system and a reactor and management computer system are connected with a CRT display control device, a printer and a CRT display input/output device, and the display computer system is connected with the CRT display control device and the CRT display unit on the central control console, whereby process input can be processed and displayed at high speed. (Yoshino, Y.)

  1. Design of a nuclear reactor cooperative controller

    International Nuclear Information System (INIS)

    Alang-Rashid, N.K.; Heger, A.S.

    1991-01-01

    This paper describes the development of a fuzzy logic controller software package and explores the feasibility of its use in nuclear reactor operation. The controller complements reactor operator actions, and the operators can override the controller decisions. Techniques of providing learning capability to the controller are also being investigated to improve the reasoning and control skill of the controller. The fuzzy logic controller is implemented in C language and its overall structure is shown. The heart of the systems consists of a fuzzifier, a rule interpreter, and a defuzzifier. The controller is designed as a stand-alone package that can be interfaced to a simulated model of a nuclear reactor. Since no model is an accurate representation of the actual process being modeled, some tuning must be performed to use the controller in an actual reactor. This is accomplished using the learning feature of the controller

  2. Quality control of nuclear medicine instruments 1991

    International Nuclear Information System (INIS)

    1991-05-01

    This document gives detailed guidance on the quality control of various instruments used in nuclear medicine. A first preliminary document was drawn up in 1979. A revised and extended version, incorporating recommended procedures, test schedules and protocols was prepared in 1982. The first edition of ''Quality Control of Nuclear Medicine Instruments'', IAEA-TECDOC-317, was printed in late 1984. Recent advances in the field of nuclear medicine imaging made it necessary to add a chapter on Camera-Computer Systems and another on SPECT Systems. Figs and tabs

  3. Quality control of nuclear medicine instruments, 1991

    International Nuclear Information System (INIS)

    1996-12-01

    This document gives detailed guidance on the quality control of various instruments used in nuclear medicine. A first preliminary document was drawn up in 1979. A revised and extended version, incorporating recommended procedures, test schedules and protocols was prepared in 1982. The first edition of 'Quality Control of Nuclear Medicine Instruments', IAEA-TECDOC-317, was printed in late 1984. Recent advances in the field of nuclear medicine imaging made it necessary to add a chapter on Camera-Computer Systems and another on SPECT Systems

  4. Linguistic control of a nuclear power plant

    International Nuclear Information System (INIS)

    Feeley, J.J.; Johnson, J.C.

    1987-01-01

    A multivariable linguistic controller based on fuzzy set theory is discussed and its application to a pressurized water nuclear power plant control is illustrated by computer simulation. The nonlinear power plant simulation model has nine states, two control inputs, one disturbance input, and two outputs. Although relatively simple, the model captures the essential coupled nonlinear plant dynamics and is convenient to use for control system studies. The use of an adaptive version of the controller is also demonstrated by computer simulation

  5. Multivariable Feedback Control of Nuclear Reactors

    Directory of Open Access Journals (Sweden)

    Rune Moen

    1982-07-01

    Full Text Available Multivariable feedback control has been adapted for optimal control of the spatial power distribution in nuclear reactor cores. Two design techniques, based on the theory of automatic control, were developed: the State Variable Feedback (SVF is an application of the linear optimal control theory, and the Multivariable Frequency Response (MFR is based on a generalization of the traditional frequency response approach to control system design.

  6. Load control on nuclear power station

    International Nuclear Information System (INIS)

    Hattori, Takuya; Tsukuda, Yoshiaki.

    1988-01-01

    Power generation control is required for the nuclear power plants to meet electric power demand. In BWRs, power generation control can be achieved by arranging the coolant flow rate and control rod operation. In PWRs, power generation can be regulated by the control rods automatically controled with the steam valves. As a result of the experiments, it is confirmed that the operational function is normal, and safety of reactor components, pressure vessel and fuel elments are assured. (Katagiri, S)

  7. Agencias de viajes en España: una industria convulsa

    OpenAIRE

    Lacalle Muñoz de Cuerva, Luis

    2013-01-01

    El efecto de la aparición de las nuevas TIC ha sido especialmente intenso y veloz en la industria turística. Esta rápida adopción de la tecnología se ha convertido en una de las causas tanto de la desaparición de un gran número de agencias, como de una intensa transformación de la industria en los últimos años. La eficiencia de las agencias puede convertirse en una de las claves para permanecer en un escenario tan competitivo y novedoso. Un análisis de la eficiencia de las agen...

  8. Prospectiva en agencias de viajes: una revisión de la literatura

    OpenAIRE

    Rosa del Carmen Cortés Bello; Elva Esther Vargas Martínez

    2018-01-01

    En los últimos años, la industria turística ha experimentado cambios entre sus diferentes agentes, formas de comercialización y beneficios obtenidos para el consumidor. Para las agencias de viajes tradicionales, su entrada al canal de distribución online ha representado una gran transformación. Este artículo pone en evidencia la escasa investigación para eliminar la incertidumbre causada por el futuro. Se identificaron 50 artículos relacionados con estudios de futuro, turismo y agencias de vi...

  9. Explorando la agencia de las mujeres encarceladas a través de sus experiencias amorosas

    OpenAIRE

    de Miguel Calvo, Estibaliz

    2017-01-01

    El presente trabajo explora la agencia de las mujeres encarceladas a través de sus experiencias emocionales, una agencia caracterizada por la redefinición de la propia identidad y por las decisiones en la vida emocional, que resultan disruptivas de las lógicas carcelarias. La base de este análisis es la investigación cualitativa con entrevistas semiestructuradas y observación participante desarrolladas en el departamento de mujeres de la cárcel de Nanclares de Oca (Álava). El amor de pareja c...

  10. Teoría de la agencia y sus aplicaciones en el mercadeo

    Directory of Open Access Journals (Sweden)

    Yuri Gorbaneff

    2001-12-01

    Full Text Available La teoría de la Agencia Principal, TAP, permite mejorar nuestra comprensión de la empresa, especialmente en el área de mercadeo. Se utiliza como una plataforma conceptual para modelar situaciones en las aéreas de administración del personal de mercadeo, en el manejo de los canales y en las relaciones entre proveedores y clientes. Por su parte, el dominio de la teoría de juegos no es un requisito sine qua non para poder utilizar la teoría de la agencia y modelar las situaciones concretas.

  11. Multivariable control in nuclear power stations

    International Nuclear Information System (INIS)

    Parent, M.; McMorran, P.D.

    1982-11-01

    Multivariable methods have the potential to improve the control of large systems such as nuclear power stations. Linear-quadratic optimal control is a multivariable method based on the minimization of a cost function. A related technique leads to the Kalman filter for estimation of plant state from noisy measurements. A design program for optimal control and Kalman filtering has been developed as part of a computer-aided design package for multivariable control systems. The method is demonstrated on a model of a nuclear steam generator, and simulated results are presented

  12. Environmental Health Impacts of Nuclear Fuel Cycle With Emphasis to Monitoring and Radiological Safety Control System

    International Nuclear Information System (INIS)

    Gad Allah, A.A.; El- Shanshory, A.I.

    2010-01-01

    Security of energy supply and global climatic changes due to carbon dioxide gas emission of fissile fuels encouraged many developed countries for planning to introduce nuclear power for energy generation. Recently, nuclear power provides approximately 20 % of the world's electricity, which is equivalent to a reduction in carbon emissions of 0.5 Gt of C/year. This is a modest contribution to the reduction of global carbon emissions, 6.5 Gt C/year. There are three types of nuclear fuel cycles that might be utilized for the increased production of energy: open, closed, or a symbiotic combination of different reactor types (such as thermal and fast neutron reactors). Within each cycle, the volume and composition of the nuclear waste and fissile material depend on the type of nuclear fuel, the amount of burn-up, the extent of radionuclide separation during reprocessing, and the types of material used to immobilize different radionuclides. Most analyses suggest that in order to have a significant impact on carbon emissions. By the year 2050, carbon free sources, such as nuclear power, would have to expand total energy production by a factor of three to ten. A three-fold increase in nuclear power capacity would result in a projected reduction in carbon emissions of 1 to 2 Gt C/year, depending on the type of the carbon-based energy source. This paper reviews, discusses and evaluates the relation between the different types of fuel cycles and their environmental impacts. The paper investigates the environmental impacts of the nuclear fuel cycle compared to fossil fuel energy system.. It also reviews the impact of an expansion of this scale on the generation of nuclear waste and fissile material that might be diverted to the production of nuclear weapons. Investigations of different wastes fissile and fertile mater in the fuel cycle have been estimated. The paper provides an overview of the main contaminates in the waste streams and effluents from nuclear fuel cycle

  13. Autonomous Control of Nuclear Power Plants

    International Nuclear Information System (INIS)

    Basher, H.

    2003-01-01

    A nuclear reactor is a complex system that requires highly sophisticated controllers to ensure that desired performance and safety can be achieved and maintained during its operations. Higher-demanding operational requirements such as reliability, lower environmental impacts, and improved performance under adverse conditions in nuclear power plants, coupled with the complexity and uncertainty of the models, necessitate the use of an increased level of autonomy in the control methods. In the opinion of many researchers, the tasks involved during nuclear reactor design and operation (e.g., design optimization, transient diagnosis, and core reload optimization) involve important human cognition and decisions that may be more easily achieved with intelligent methods such as expert systems, fuzzy logic, neural networks, and genetic algorithms. Many experts in the field of control systems share the idea that a higher degree of autonomy in control of complex systems such as nuclear plants is more easily achievable through the integration of conventional control systems and the intelligent components. Researchers have investigated the feasibility of the integration of fuzzy logic, neural networks, genetic algorithms, and expert systems with the conventional control methods to achieve higher degrees of autonomy in different aspects of reactor operations such as reactor startup, shutdown in emergency situations, fault detection and diagnosis, nuclear reactor alarm processing and diagnosis, and reactor load-following operations, to name a few. With the advancement of new technologies and computing power, it is feasible to automate most of the nuclear reactor control and operation, which will result in increased safety and economical benefits. This study surveys current status, practices, and recent advances made towards developing autonomous control systems for nuclear reactors

  14. Autonomous Control of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Basher, H.

    2003-10-20

    A nuclear reactor is a complex system that requires highly sophisticated controllers to ensure that desired performance and safety can be achieved and maintained during its operations. Higher-demanding operational requirements such as reliability, lower environmental impacts, and improved performance under adverse conditions in nuclear power plants, coupled with the complexity and uncertainty of the models, necessitate the use of an increased level of autonomy in the control methods. In the opinion of many researchers, the tasks involved during nuclear reactor design and operation (e.g., design optimization, transient diagnosis, and core reload optimization) involve important human cognition and decisions that may be more easily achieved with intelligent methods such as expert systems, fuzzy logic, neural networks, and genetic algorithms. Many experts in the field of control systems share the idea that a higher degree of autonomy in control of complex systems such as nuclear plants is more easily achievable through the integration of conventional control systems and the intelligent components. Researchers have investigated the feasibility of the integration of fuzzy logic, neural networks, genetic algorithms, and expert systems with the conventional control methods to achieve higher degrees of autonomy in different aspects of reactor operations such as reactor startup, shutdown in emergency situations, fault detection and diagnosis, nuclear reactor alarm processing and diagnosis, and reactor load-following operations, to name a few. With the advancement of new technologies and computing power, it is feasible to automate most of the nuclear reactor control and operation, which will result in increased safety and economical benefits. This study surveys current status, practices, and recent advances made towards developing autonomous control systems for nuclear reactors.

  15. Advanced display concepts in nuclear control rooms

    International Nuclear Information System (INIS)

    Clark, M.T.; Banks, W.W.; Blackman, H.S.; Gertman, D.I.

    1982-01-01

    Precursors necessary for the development of a full-scale predictor display/control system have been under development since the mid 1940's. The predictor display itself has been available for use in manual control systems since 1958. However, the nuclear industry has not yet explored the uses and benefits of predictor systems. The purpose of this paper is to provide information on the application of this technology to the nuclear industry. The possibility of employing a simulation-based control system for nuclear plant systems that currently use conventional auto/manual schemes is discussed. By employing simulation-based systems, a predictor display could be made available to the operator during manual operations, thus facilitating control without outwardly affecting the overall control scheme

  16. Global nuclear material flow/control model

    International Nuclear Information System (INIS)

    Dreicer, J.S.; Rutherford, D.S.; Fasel, P.K.; Riese, J.M.

    1997-01-01

    This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The nuclear danger can be reduced by a system for global management, protection, control, and accounting as part of an international regime for nuclear materials. The development of an international fissile material management and control regime requires conceptual research supported by an analytical and modeling tool which treats the nuclear fuel cycle as a complete system. The prototype model developed visually represents the fundamental data, information, and capabilities related to the nuclear fuel cycle in a framework supportive of national or an international perspective. This includes an assessment of the global distribution of military and civilian fissile material inventories, a representation of the proliferation pertinent physical processes, facility specific geographic identification, and the capability to estimate resource requirements for the management and control of nuclear material. The model establishes the foundation for evaluating the global production, disposition, and safeguards and security requirements for fissile nuclear material and supports the development of other pertinent algorithmic capabilities necessary to undertake further global nuclear material related studies

  17. Educação e hegemonia na América Latina de hoje: projetos de sociedade e de educação nos anos 90: Brasil, Argentina, Chile e Venezuela

    Directory of Open Access Journals (Sweden)

    Adriana Almeida Sales de Melo

    2000-01-01

    Full Text Available Iniciada em março de 1999, esta pesquisa está se desenvolvendo como elemento de meu doutorado em educação. Este trabalho também faz parte do Projeto CORI/MERCOSUL, área temática Educação, desde 1999. Esta investigação tem como tema central a relação entre os diversos projetos de sociedade e de educação dos principais sujeitos políticos coletivos que planejam e atuam na direção atual das políticas educacionais dos países da América Latina. Pretendemos analisar o processo de transição e consolidação democrática do Brasil, Argentina, Chile e Venezuela; bem como o redirecionamento das políticas educacionais nestes ambientes culturais, no sentido de esclarecer as contradições entre as demandas e objetivos dos sujeitos políticos coletivos locais e internacionais em seu movimento de construção de um projeto hegemônico de sociedade e de educação; ora neoliberal, ora democrático de massas. Este tipo de análise pode trazer contribuições reais no sentido da construção e sistematização de elementos de integração entre as diversas identidades históricas e culturais dos nossos países; interferindo sob a forma de novas categorias de investigação, no nosso planejamento e ação educacionais locais. Started in 1999, march, this research is going on as an element of my education doctorate. This work is also part of CORI/MERCOSUL project, at education thematic area, since 1999. This investigation has as central theme the relation between "society and education projects" of the principal politician social subjects that plan and actuate in the actual educational policies directions at Latin America countries. We intend to analyze the democratic transition and consolidation in Brazil, Argentina, Chile and Venezuela; and also the educational policies redirections in these cultural ambiance; in the way to clarify the contradictions between these social subjects demands and objectives in their building process of "society

  18. Nuclear power station main control room habitability

    International Nuclear Information System (INIS)

    Paschal, W.B.; Knous, W.S.

    1989-01-01

    The main control room at a nuclear power station must remain habitable during a variety of plant conditions and postulated events. The control room habitability requirement and the function of the heating, ventilating, air-conditioning, and air treatment system are to control environmental factors, such as temperature, pressure, humidity, radiation, and toxic gas. Habitability requirements provide for the safety of personnel and enable operation of equipment required to function in the main control room. Habitability as an issue has been gaining prominence with the Advisor Committee of Reactor Safeguards and the Nuclear Regulatory Commission since the incident at Three Mile Island. Their concern is the ability of the presently installed habitability systems to control the main control room environment after an accident. This paper discusses main control room HVAC systems; the concern, requirements, and results of NRC surveys and notices; and an approach to control room habitability reviews

  19. Control system security in nuclear power plant

    International Nuclear Information System (INIS)

    Li Jianghai; Huang Xiaojin

    2012-01-01

    The digitalization and networking of control systems in nuclear power plants has brought significant improvements in system control, operation and maintenance. However, the highly digitalized control system also introduces additional security vulnerabilities. Moreover, the replacement of conventional proprietary systems with common protocols, software and devices makes these vulnerabilities easy to be exploited. Through the interaction between control systems and the physical world, security issues in control systems impose high risks on health, safety and environment. These security issues may even cause damages of critical infrastructures and threaten national security. The importance of control system security by reviewing several control system security incidents that happened in nuclear power plants was showed in recent years. Several key difficulties in addressing these security issues were described. Finally, existing researches on control system security and propose several promising research directions were reviewed. (authors)

  20. Nuclear propulsion control and health monitoring

    Science.gov (United States)

    Walter, P. B.; Edwards, R. M.

    1993-11-01

    An integrated control and health monitoring architecture is being developed for the Pratt & Whitney XNR2000 nuclear rocket. Current work includes further development of the dynamic simulation modeling and the identification and configuration of low level controllers to give desirable performance for the various operating modes and faulted conditions. Artificial intelligence and knowledge processing technologies need to be investigated and applied in the development of an intelligent supervisory controller module for this control architecture.

  1. PLCs for nuclear fire control system

    International Nuclear Information System (INIS)

    McArthur, Neil

    1990-01-01

    The new Thermal Oxide Reprocessing Plant (THORP) at British Nuclear Fuel's Sellafield site is a very large and complex system. This article describes the computerized control system used for fire damage control in the two main production areas, the head end and the chemical separation segments. Over one thousand fire dampers are controlled by an interlinking system of small computers linked to a main system in the central control room. The choice of hardware and software is also described. (UK)

  2. Nuclear technology and the export control laws

    International Nuclear Information System (INIS)

    Munroe, J.L.; Pankratz, M.C.; Hogsett, V.H.; Lundy, A.S.

    1988-01-01

    Three basic US laws regulate the export of commodities, services, and technical data. People working in nuclear fields need to know of these laws and their impact on professional endeavors. Export of technical data means the communication of any information by oral, written, or any other means to foreign nationals within or outside the US. The medium for the communication may be a model, blueprint, sketch, or any other device that can convey information. If the data relates to items on one of the control lists, a license must be sought from the appropriated federal agency. The Militarily Critical Technologies List (MCTL), though not itself a control list, plays a major role in determining what technical data will require a validated license. The US Department of Energy (DOE), through Technical Working Gorup (TWG) 11, is responsible for the Nuclear Technology chapter of the MCTL. TWG 11 also prepares the Nuclear Technology Reference Book (NTRB), a classified guide to sensitive nuclear technology

  3. 60 years controlled nuclear fission: CP-1

    International Nuclear Information System (INIS)

    Anon.

    2002-01-01

    On December 2, 1942, the Chicago Pile 1 (CP-1) went critical for the first time. In this way, the scientists and engineers involved in the project under the leadership of Enrico Fermi succeeded in demonstrating that a self-sustaining nuclear reaction with nuclear fission processes was technically feasible. Only four years after the discovery and proof of nuclear fission by Otto Hahn, Fritz Strassmann, and Lise Meitner, the experiment consisting of graphite blocks as the moderator and uranium dioxide pellets as the fuel, as well as instrumentation and control devices, had been set up in the former squash court of the field and track stadium of the University of Chicago. Precisely at 3.36 a.m. Chicago time, after control rods had been withdrawn, the instruments showed the chain reaction by the neutron flux they indicated. An important cornerstone in the use of nuclear power had thus been laid. (orig.)

  4. Shock buffer for nuclear control assembly

    International Nuclear Information System (INIS)

    Bevilacqua, F.

    1977-01-01

    A shock buffer is provided for the gradual deceleration of a rapidly descending control element assembly in a nuclear reactor. The interactive buffer components are associated respectively with the movable control element assembly and part of the upper guide structure independent of and spaced from the fuel assemblies of the reactor

  5. Regulation on control of nuclear fuel materials

    International Nuclear Information System (INIS)

    Ikeda, Kaname

    1976-01-01

    Some comment is made on the present laws and the future course of consolidating the regulation of nuclear fuel materials. The first part gives the definitions of the nuclear fuel materials in the laws. The second part deals with the classification and regulation in material handling. Refinement undertaking, fabrication undertaking, reprocessing undertaking, the permission of the government to use the materials, the permission of the government to use the materials under international control, the restriction of transfer and receipt, the reporting, and the safeguard measures are commented. The third part deals with the strengthening of regulation. The nuclear fuel safety deliberation special committee will be established at some opportunity of revising the ordinance. The nuclear material safeguard special committee has been established in the Atomic Energy Commission. The last part deals with the future course of legal consolidation. The safety control will be strengthened. The early investigation of waste handling is necessary, because low level solid wastes are accumulating at each establishment. The law for transporting nuclear materials must be consolidated as early as possible to correspond to foreign transportation laws. Physical protection is awaiting the conclusions of the nuclear fuel safeguard special committee. The control and information systems for the safeguard measures must be consolidated in the laws. (Iwakiri, K.)

  6. Nuclear material control in the United States

    International Nuclear Information System (INIS)

    Jaeger, C.; Waddoups, I.

    1995-01-01

    The Department of Energy has defined a safeguards system to be an integrated system of physical protection, material accounting and material control subsystems designed to deter, prevent, detect, and respond to unauthorized possession, use, or sabotage of SNM. In practice, safeguards involve the development and application of techniques and procedures dealing with the establishment and continued maintenance of a system of activities. The system must also include administrative controls and surveillance to assure that the procedures and techniques of the system are effective and are being carried out. The control of nuclear material is critical to the safeguarding of nuclear materials within the United States. The U.S. Department of Energy includes as part of material control four functional performance areas. They include access controls, material surveillance, material containment and detection/assessment. This paper will address not only these areas but also the relationship between material control and other safeguards and security functions

  7. Non-destructive control in nuclear construction

    International Nuclear Information System (INIS)

    Banus; Barbier; Launay

    1978-01-01

    Having recalled the characteristics of the fundamental components of the main primary circuit of nuclear boilers (900 MW) and the means appropriated for their control, it is recalled that the 'French Electricity Board's specifications and control rules' often prescribe more severe criteria than those existing in the U.S.A. Then practical examples of non-destructive controls concerning the steam generator end plates, vessel stainless steel linings, pump attachements, steam generator pipes are given [fr

  8. Comportamientos y capacidad de agencia de autocuidado de adultos con insuficiencia cardiaca

    Directory of Open Access Journals (Sweden)

    EDITH ARREDONDO HOLGUÍN

    2010-06-01

    Full Text Available Este estudio tiene como objetivo describir comportamientos y capacidad de agencia de autocuidado de pacientes con insuficiencia cardiaca de una clínica cardiovascular de Medellín entre noviembre de 2007 y mayo de 2008. Es un estudio descriptivo con abordaje cuantitativo. La muestra fue de 206 adultos con insuficiencia cardiaca diagnosticados por sintomatología clínica, fracción de eyección menor o igual a 40%. Se usaron para la recolección de datos la Escala Capacidad de Agencia de Autocuidado desarrollada por Isemberg y Evers et ál. (1993, traducida por Gallego, que mide el nivel de agencia de autocuidado, y la Escala Comportamientos de Autocuidado validada en Colombia en 2007 por Arredondo, que mide la frecuencia de comportamientos de autocuidado de adultos con insuficiencia cardiaca en la solicitud de ayuda, adaptación a vivir con la enfermedad y el régimen terapéutico, modificación del autoconcepto y aceptación de sí mismo, vivir con efectos de la insuficiencia cardiaca y el tratamiento. Concluye que el mayor número de pacientes eran hombres; que factores básicos condicionantes como el apoyo de la familia, desempeño de un trabajo, afiliación al sistema de salud, nivel socioeconómico y acceso a un nivel educativo fueron importantes para los pacientes. La frecuencia de comportamientos de autocuidado fue media en los adultos en la mayoría de las dimensiones y el nivel de agencia fue alto y muy alto. Igualmente se concluyó que no hay una correlación entre agencia y comportamientos de autocuidado. Lo que plantea que los adultos tienen el conocimiento pero no han tomado la decisión de realizar acciones de autocuidado.

  9. Weld controller for automated nuclear service welding

    International Nuclear Information System (INIS)

    Barfield, K.L.; Strubhar, P.M.; Green, D.I.

    1995-01-01

    B and W Nuclear Technologies (BWNT) uses many different types of weld heads for automated welding in the commercial nuclear service industry. Some weld heads are purchased as standard items, while others are custom designed and fabricated by BWNT requiring synchronized multiaxis motion control. BWNT recently completed a development program to build a common weld controller that interfaces to all types of weld heads used by BWNT. Their goal was to construct a system that had the flexibility to add different modules to increase the capability of the controller as different application needs become necessary. The benefits from having a common controller are listed. This presentation explains the weld controller system and the types of applications to which it has been applied

  10. Control for nuclear thermionic power source

    International Nuclear Information System (INIS)

    Fletcher, J.C.; Sawyer, C.D.

    1978-01-01

    A control for a power source is described which includes nuclear fuel interspersed with thermionic converters, including a power regulator that maintains a substantially constant output voltage to a variable load, and a control circuit that drives a neutron flux regulator in accordance with the current supplied to the power regulator and the neutron flux density in the region of the converters. The control circuit generates a control signal which is the difference between the neutron flux density and a linear fucntion of the current, and which drives the neutron regulator in a direction to decrease or increase the neutron flux according to the polarity of the control signal

  11. 78 FR 38739 - Special Nuclear Material Control and Accounting Systems for Nuclear Power Plants

    Science.gov (United States)

    2013-06-27

    ... Systems for Nuclear Power Plants AGENCY: Nuclear Regulatory Commission. ACTION: Regulatory guide; issuance... Guide (RG) 5.29, ``Special Nuclear Material Control and Accounting Systems for Nuclear Power Plants... material control and accounting. This guide applies to all nuclear power plants. ADDRESSES: Please refer to...

  12. 10 CFR 74.51 - Nuclear material control and accounting for strategic special nuclear material.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Nuclear material control and accounting for strategic special nuclear material. 74.51 Section 74.51 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) MATERIAL CONTROL AND ACCOUNTING OF SPECIAL NUCLEAR MATERIAL Formula Quantities of Strategic Special Nuclear...

  13. NPT, export controls and nuclear trade

    International Nuclear Information System (INIS)

    Pande, Savita

    1997-01-01

    Nuclear trade has by and large remained unhampered vis-a-vis both the NPT as well as export control regulations. The NPT rules are regarded as insufficient, the guidelines appear to contravene the spirit of cooperation in trade and development between suppliers and recipients and there is no agreement among leading suppliers themselves on what constitutes the proper conduct of trade. Export control regimes are more or less too informal to be able to be implemented. The supplier states have to invariably depend on national legislations which again vary from country to country. The only common formal basis on which action can be taken is, therefore, the NPT, its loopholes notwithstanding. The idea of transparency, and supplier-recipient dialogue continues to be a myth and will continue to be so long as these regimes remain discriminatory, so long as some nations are more powerful than others by virtue of retaining nuclear weapons and superiority in nuclear technology and trade

  14. Control rod for nuclear reactor

    International Nuclear Information System (INIS)

    Tada, Kaoru; Kawano, Shohei

    1998-01-01

    A guide roller is prepared by forming an oxide membrane on the surface of a molded roller product comprising, as a material, a deposition-reinforced type nickel-based alloy reinforced by deposition of fine particles by applying a heat treatment to a nickel-based alloy. When the guide roller is used in reactor water, since the roller has an oxide membrane on the surface, leaching of nickel to reactor water is reduced, and radioactive corrosive products including cobalt 58 are reduced to decrease an operator's exposure dose upon periodical inspections of a plant. The oxide membrane is formed by applying heat treatment under an oxidative atmosphere. Then, the amount of abrasion of pins and rollers in association with start-up or shut down of a reactor and control of the power can be reduced thereby enabling to suppress increase of radiation dose due to cobalt 60 and cobalt 58. (N.H.)

  15. Principles of nuclear power station control

    International Nuclear Information System (INIS)

    Knowles, J.B.

    1975-12-01

    This memorandum represents lecture notes first distributed as part of a UKAEA introductory course on Reactor Technology held during November 1975. A nuclear power station is only one element of a dispersed interconnected arrangement of other nuclear and fossil-fired units which together constitute the national 'grid'. Thus the control of any one station must relate to the objectives of the grid network as a whole. A precise control of the supply frequency of the grid is achieved by regulating the output power of individual stations, and it is necessary for each station to be stable when operating in isolation with a variable load. As regards individual stations, several special control problems concerned with individual plant items are discussed, such as: controlled reactivity insertions, temperature reactivity time constants and flow instability. A simplified analysis establishes a fundamental relationship between the stored thermal energy of a boiler unit (a function of mechanical construction) and the flexibility of the heat source (nuclear or fossil-fired) if the station is to cope satisfactorily with demands arising from unscheduled losses of other generating sets or transmission capacity. Two basic control schemes for power station operation are described known as 'coupled' and 'decoupled control'. Each of the control modes has its own merits, which depend on the proposed station operating strategy (base load or load following) and the nature of the heat source. (U.K.)

  16. Controlled Nuclear Fusion: Status and Outlook

    Science.gov (United States)

    Rose, David J.

    1971-01-01

    Presents the history, current concerns and potential developments of nuclear fusion as a major energy source. Controlled fusion research is summarized, technological feasibility is discussed and environmental factors are examined. Relationships of alternative energy sources as well as energy utilization are considered. (JM)

  17. Digital control in nuclear power plants

    International Nuclear Information System (INIS)

    Bouzon, B.

    1984-01-01

    This document presents the latest automatic control structures used in the programmable control systems of 13.00 MW nuclear power plants constructed by Electricite de France. The impact of this technological innovation goes beyond a straightforward design modification; in addition to the new range of processes made possible, it permits far-reaching changes in the working method employed at the design office and in the field. (author)

  18. Damper mechanism for nuclear reactor control elements

    International Nuclear Information System (INIS)

    Taft, W.E.

    1976-01-01

    A damper mechanism which provides a nuclear reactor control element decelerating function at the end of the scram stroke is described. The total damping function is produced by the combination of two assemblies, which operate in sequence. First, a tapered dashram assembly decelerates the control element to a lower velocity, after which a spring hydraulic damper assembly takes over to complete the final damping. 3 claims, 2 figures

  19. Shock buffer for nuclear control element assembly

    International Nuclear Information System (INIS)

    Bevilacqua, F.

    1977-01-01

    A shock buffer for a control element assembly in a nuclear reactor is described, comprising a piston and a cylinder. The piston is affixed to and extends upward from the control rod guide structure; the cylinder is supported by the upper portion of the control element assembly and is vertically oriented with open end downward for receiving the piston. Coolant liquid normally has free access to the cylinder. The piston displaces liquid from the cylinder when inserted, thereby decelerating the control element assembly near its lower extent of travel. (LL)

  20. Fast-acting nuclear reactor control device

    International Nuclear Information System (INIS)

    Kotlyar, O.M.; West, P.B.

    1993-01-01

    A fast-acting nuclear reactor control device is described for controlling a safety control rod within the core of a nuclear reactor, the reactor controlled by a reactor control system, the device comprising: a safety control rod drive shaft and an electromagnetic clutch co-axial with the drive shaft operatively connected to the safety control rod for driving and positioning the safety control rod within or without the reactor core during reactor operation, the safety rod being oriented in a substantially vertical position to allow the rod to fall into the reactor core under the influence of gravity during shutdown of the reactor; the safety control rod drive shaft further operatively connected to a hydraulic pump such that operation of the drive shaft simultaneously drives and positions the safety control rod and operates the hydraulic pump such that a hydraulic fluid is forced into an accumulator, filling the accumulator with oil for the storage and supply of primary potential energy for safety control rod insertion such that the release of potential energy in the accumulator causes hydraulic fluid to flow through the hydraulic pump, converting the hydraulic pump to a hydraulic motor having speed and power capable of full length insertion and high speed driving of the safety control rod into the reactor core; a solenoid valve interposed between the hydraulic pump and the accumulator, said solenoid valve being a normally open valve, actuated to close when the safety control rod is out of the reactor during reactor operation; and further wherein said solenoid opens in response to a signal from the reactor control system calling for shutdown of the reactor and rapid insertion of the safety control rod into the reactor core, such that the opening of the solenoid releases the potential energy in the accumulator to place the safety control rod in a safe shutdown position

  1. Reactor control device for controlling load of nuclear power plant

    International Nuclear Information System (INIS)

    Hirota, Tadakuni; Yokoyama, Terukuni; Masuda, Jiro.

    1981-01-01

    Purpose: To improve the load follow-up capacity of a nuclear reactor by automatically controlling the width of the not-sensing band of a control rod inserting and removing discriminator circuit. Constitution: When load control operations such as automatic load control, automatic frequency control, governor free operation and so forth are conducted, the width of a not sensing band of a control rod inserting and removing discriminator circuit is ao automatically controlled that the not sensing band width may return to ordinary value in a normal operation by avoiding the fast repetition of inserting and removing control rods by increasing the width of the insensing band if the period of a control deviation signal produced due to the variation in the load is quickly repeated and varied in correspondence to the control deviation signal. That is, a circuit for varying the insensing band of the control circuit for driving a control mechanism is provided to reduce the amount of driving the control rods in a load control operation and to reduce the strain of the power distribution of the nuclear reactor, thereby improving the load control capacity. (Yoshihara, H.)

  2. Quality control in paediatric nuclear medicine

    International Nuclear Information System (INIS)

    Fischer, S.; Hahn, K.

    1997-01-01

    Nuclear medicine examinations in children require a maximum in quality. This is true for the preparation of the child and parents, the imaging procedure, processing and documentation. It is necessary that quality control through all steps is performed regularly. The aim must be that the children receive a minimum radiation dose, while there needs to be a high quality in imaging and clinical information from the study. Furthermore the child should not be too much psychologically affected by the nuclear medicine examination. (orig.) [de

  3. The control of nuclear sector; Le controle du nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The Asn is loaded with the control of the nuclear safety and the radiation protection in France: it provides this control, in the name of the state, to protect the workers, the patients, the public and the environment of the risks in relation with nuclear activities. The control is the core business of Asn. Asn so checks the nuclear basic installations (I.N.B.), since their conception until their dismantling, the pressure equipment specially conceived for these installations, the management of the radioactive waste as well as the transport of radioactive substances. Asn also checks all the industrial and research installations as well as the hospitals where are used ionizing radiations. It is a more recent profession there, because dating the reform of the control of the nuclear power of 2002, which constitutes that of the radiation protection. The first responsibility of the activities at risks falls to the one who begins them. This principle applies to all the sectors checked by Asn: an industrialist is responsible for the safety of the nuclear installations which he exploits, a doctor is responsible for the use of the ionizing radiations which he uses. (N.C.)

  4. Use of nuclear techniques in biological control

    International Nuclear Information System (INIS)

    Greany, Patrick D.; Carpenter, James E.

    2000-01-01

    As pointed out by Benbrook (1996), pest management is at a crossroads, and there is a great need for new, biointensive pest management strategies. Among these approaches, biological control is a keystone. However, because of increasing concerns about the introduction of exotic natural enemies of insect pests and weeds (Howarth 1991, Delfosse 1997), the overall thrust of biological control has moved toward augmentative biological control, involving releases of established natural enemy species (Knipling 1992). This in turn has created a need to develop more cost-effective mass rearing technologies for beneficial insects. Nuclear techniques could play an especially important role in augmentative biological control, not only in facilitating mass rearing, but in several other ways, as indicated below. Recognising the potential value for use of nuclear techniques in biological control, the Insect and Pest Control Section of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, sponsored a Consultants' Group Meeting on this subject in April 1997. The Group produced a document entitled Use of Nuclear Techniques in Biological Control: Managing Pests, Facilitating Trade and Protecting the Environment. The consultants included the authors of this paper as well as Ernest Delfosse (at that time, with the USDA-APHIS National Biological Control Institute), Garry Hill (Intl. Institute for Biological Control), Sinthya Penn (Beneficial Insectary), and Felipe Jeronimo (USDA-APHIS PPQ, Guatemala). The remarks presented in this paper reflect the thoughts presented by these consultants and other participants at the IAEA-sponsored meeting. Several potential uses for nuclear techniques were identified by the Consultants' Group, including: 1) improvements in rearing media (either artificial diets or natural hosts/prey), 2) provision of sterilised natural prey to be used as food during shipment, to ameliorate concerns relating to the

  5. Reliable control system for nuclear power plant

    International Nuclear Information System (INIS)

    Okamoto, Tetsuo; Miyazaki, Shiro

    1980-01-01

    The System 1100 for nuclear power plants is the measuring and control system which utilizes the features of the System 1100 for electric power market in addition to the results of nuclear instrumentation with EBS-ZN series, and it has the following features. The maintenance and inspection in operation are easy. The construction of control loops is made flexibly by the combination of modules. The construction of multi-variable control system using mainly feed forward control is easy. Such functions as the automatic switching of control modes can be included. The switching of manual and automatic operations is easy, and if some trouble occurred in a module, the manual operation can be made. The aseismatic ability is improved by rigid structure cubicles. Nonflammable materials are used for wires, multi-core cables, paints and printed boards. The anti-noise characteristics are improved, and the reliability is high. The policy of developing the System 1100 for nuclear power plants, the type approval tests on modules and units and the type approval test on the system are described. The items of the system type approval test were standard performance test, earthquake test, noise isolation test, temperature and humidity test, and drift test. The aseismatic cubicle showed good endurance in its vibration test. (Kako, I.)

  6. Controlling a nuclear spin in a nanodiamond

    Science.gov (United States)

    Knowles, Helena S.; Kara, Dhiren M.; Atatüre, Mete

    2017-09-01

    The sensing capability of a single optically bright electronic spin in diamond can be enhanced by making use of proximal dark nuclei as ancillary spins. Such systems, so far realized only in bulk diamond, can provide orders of magnitude higher sensitivity and spectral resolution in the case of magnetic sensing, as well as improved readout fidelity and state storage time in quantum information schemes. Nanodiamonds offer opportunities for scanning and embedded nanoscale probes, yet electronic-nuclear spin complexes have so far remained inaccessible. Here, we demonstrate coherent control of a 13C nuclear spin located 4 Å from a nitrogen-vacancy center in a nanodiamond and show coherent exchange between the two components of this hybrid spin system. We extract a free precession time T2* of 26 μ s for the nuclear spin, which exceeds the bare-electron free-precession time in nanodiamond by two orders of magnitude.

  7. Nuclear power proliferation. Problems of international control

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B [International Inst. for Environment and Development, London (UK)

    1977-09-01

    The nuclear industry is experiencing a multiple crisis in which economic, technical and ethical aspects are blended inextricably. Nuclear hardware costs have everywhere soared far beyond inflation in the last five years, largely as a result of delays in programme completion arising from problems of reactor and fuel cycle. Meanwhile, partly as a result of this cost escalation, there is widespread and growing doubt as to whether capital will be available to finance the electricity generating levels projected by the industry and by governments for the 1990s. The nuclear industry is now in trouble at every stage of the fuel cycle. The industry's difficulties have also revealed a lack of overall - but particularly nuclear - energy strategy at either national or international levels, and a lack of will to create regulations and institutional machinery at either of these levels which might reassure both concerned publics and the energy industries themselves. This paper appraises some of the present limitations of international institutions in achieving control and management of nuclear power.

  8. Nuclear power proliferation: problems of international control

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, B

    1977-09-01

    Some of the present limitations of international institutions in achieving control and management of nuclear power are reviewed and appraised. The nuclear industry is experiencing a multiple crisis in which economic, technical, and ethical aspects are blended. Nuclear hardware costs have increased faster than inflation in the last five years, largely as a result of delays in program completion arising from reactor and fuel-cycle safety problems. Meanwhile, there is a widespread and growing doubt, partly as a result of this cost escalation, as to whether capital will be available to finance the electricity-generating levels projected by the industry and by governments for the 1990s. The nuclear industry is now in trouble at every stage of the fuel cycle. The industry's difficulties have also revealed a lack of overall--but particularly nuclear--energy strategy at either national or international levels, and a lack of will to create regulations and institutional machinery at either of these levels that could reassure the concerned public and the energy industries.

  9. Nuclear reactor plants and control systems therefor

    International Nuclear Information System (INIS)

    de Boer, G.A.; de Hex, M.

    1976-01-01

    A nuclear reactor plant is described comprising at least two hydraulically separated but thermally interconnected heat conveying circuits, of which one is the reactor circuit filled with a non-water medium and the other one is the water-steam-circuit equipped with a steam generator, a feed water conduit controlled by a valve and a steam turbine, and a control system mainly influenced by the pressure drop caused in said feed water conduit and its control valve and having a value of at least 10 bars at full load

  10. Quality control of nuclear medicine instrumentation

    International Nuclear Information System (INIS)

    Mould, R.F.

    1983-09-01

    The proceedings of a conference held by the Hospital Physicists' Association in London 1983 on the quality control of nuclear medicine instrumentation are presented. Section I deals with the performance of the Anger gamma camera including assessment during manufacture, acceptance testing, routine testing and long-term assessment of results. Section II covers interfaces, computers, the quality control problems of emission tomography and the quality of software. Section III deals with radionuclide measurement and impurity assessment and Section IV the presentation of images and the control of image quality. (U.K.)

  11. Intelligent distributed control for nuclear power plants

    International Nuclear Information System (INIS)

    Klevans, E.H.

    1991-01-01

    In September of 1989 work began on the DOE University Program grant DE-FG07-89ER12889. The grant provides support for a three year project to develop and demonstrate Intelligent Distributed Control (IDC) for Nuclear Power Plants. The body of this First Annual Technical Progress report summarizes the first year tasks while the appendices provide detailed information presented at conference meetings. One major addendum report, authored by M.A. Schultz, describes the ultimate goals and projected structure of an automatic distributed control system for EBR-2. The remaining tasks of the project develop specific implementations of various components required to demonstrate the intelligent distributed control concept

  12. Nuclear export controls - Closing the gaps

    International Nuclear Information System (INIS)

    Schmidt, Fritz W.

    2005-01-01

    Concerns over a nuclear 'black market' have focused international attention on the effectiveness of nuclear export controls. IAEA Director General Mohamed ElBaradei has stated that the emergence of a multinational illicit network demonstrated the inadequacy of the present export control system, that international cooperation on export controls lay on informal arrangements that were not only not binding but also limited in membership, and that export control information was not systematically shared with the IAEA. This criticism, often heard on the political level, does not really do justice to the work of export control groups. The emergence of a multinational illicit network does not necessarily prove failures in export control systems. Criminal activities, by definition, try to circumvent existing rules and regulations, or they exploit the absence of such rules on State level. To fight such individual cases is not so much a task of regular export control systems, whose function lies primarily in establishing standards and procedures for export controls on State level, but rather the task for intelligence services and their international cooperation. The basis of the export control regime is the Nuclear Non-Proliferation Treaty (NPT). Export controls can - and do - play an important role in fostering this universality goal by demanding the implementation of internationally agreed security standards in recipient countries before export licenses are granted. Drawn from the deliberations in the NPT conferences, the current standards to be demanded as conditions of supply are the following: Safeguards, Physical Protection, National export control provisions. According to the NPT system, export controls require IAEA verification in the recipient country. In addition, export controls enable States to provide information to the IAEA on exports and imports as required by the Additional Protocol. The 2005 NPT Review Conference will be an opportunity to review developments

  13. Digital control for nuclear reactors - lessons learned

    International Nuclear Information System (INIS)

    Bernard, J.A.; Aviles, B.N.; Lanning, D.D.

    1992-01-01

    Lessons learned during the course of the now decade-old MIT program on the digital control of nuclear reactors are enumerated. Relative to controller structure, these include the importance of a separate safety system, the need for signal validation, the role of supervisory algorithms, the significance of command validation, and the relevance of automated reasoning. Relative to controller implementation, these include the value of nodal methods to the creation of real-time reactor physics and thermal hydraulic models, the advantages to be gained from the use of real-time system models, and the importance of a multi-tiered structure to the simultaneous achievement of supervisory, global, and local control. Block diagrams are presented of proposed controllers and selected experimental and simulation-study results are shown. In addition, a history is given of the MIT program on reactor digital control

  14. Power supply trip control for nuclear reactor

    International Nuclear Information System (INIS)

    Hager, R.E.; Gutman, Jerzy.

    1987-01-01

    A control system for a trip coil in a switchgear mechanism controls the supply of electrical power to a process control device and ensures de-energization of the trip coil shortly after the trip coil is energized. The trip coil is energized not by an independent dc source as in prior art, but from rectified power from a step down transformer supplied from the switchgear output side. The transformer feeds a rectifier which is connected to the trip coil via a trip activation device. The output of the rectifier can be monitored using an optical converter to determine the ability of the control system to activate the trip coil and the condition of the power supplied to the process control device. The control device may be a rod positioner in a pressurised water nuclear reactor. (author)

  15. Automated entry control system for nuclear facilities

    International Nuclear Information System (INIS)

    Ream, W.K.; Espinoza, J.

    1985-01-01

    An entry control system to automatically control access to nuclear facilities is described. The design uses a centrally located console, integrated into the regular security system, to monitor the computer-controlled passage into and out of sensitive areas. Four types of entry control points are used: an unmanned enclosed portal with metal and SNM detectors for contraband detection with positive personnel identification, a bypass portal for contraband search after a contraband alarm in a regular portal also with positive personnel identification, a single door entry point with positive personnel identification, and a single door entry point with only a magnetic card-type identification. Security force action is required only as a response to an alarm. The integration of the entry control function into the security system computer is also described. The interface between the entry control system and the monitoring security personnel utilizing a color graphics display with touch screen input is emphasized. 2 refs., 7 figs

  16. Histological examination of the gadolinium-enhanced dura mater around meningiomas on magnetic resonance imaging

    International Nuclear Information System (INIS)

    Sakai, Keiichi; Tada, Tsuyoshi; Fukasaku, Kazuaki; Kyoshima, Kazuhiko; Kobayashi, Shigeaki

    1993-01-01

    Magnetic resonance imaging often demonstrates gadolinium (Gd) enhancement of the dura mater around meningiomas. The Gd-enhanced dura mater was histologically investigated to detect meningioma cells. Gd enhancement of the dura mater occurred in 11 (79%) of the 14 meningiomas studied, and extended as far as 35 mm from the tumor. Histological examination revealed generation of vascular-rich loose connective tissue at the surface of the dura in all five tumors examined. Some clusters of meningothelial cells were distributed in the loose connective tissue in three of the five specimens, and one cluster was obviously neoplastic. These observations suggest that clusters of meningioma cells occur in the Gd-enhanced dura mater around meningiomas. (author)

  17. Histological examination of the gadolinium-enhanced dura mater around meningiomas on magnetic resonance imaging

    Energy Technology Data Exchange (ETDEWEB)

    Sakai, Keiichi; Tada, Tsuyoshi; Fukasaku, Kazuaki; Kyoshima, Kazuhiko; Kobayashi, Shigeaki [Shinshu Univ., Matsumoto, Nagano (Japan). Faculty of Medicine

    1993-07-01

    Magnetic resonance imaging often demonstrates gadolinium (Gd) enhancement of the dura mater around meningiomas. The Gd-enhanced dura mater was histologically investigated to detect meningioma cells. Gd enhancement of the dura mater occurred in 11 (79%) of the 14 meningiomas studied, and extended as far as 35 mm from the tumor. Histological examination revealed generation of vascular-rich loose connective tissue at the surface of the dura in all five tumors examined. Some clusters of meningothelial cells were distributed in the loose connective tissue in three of the five specimens, and one cluster was obviously neoplastic. These observations suggest that clusters of meningioma cells occur in the Gd-enhanced dura mater around meningiomas. (author).

  18. BENCHMARKING INTERNO EN UNA CENTRAL DE COMPRAS DE AGENCIAS DE VIAJES

    Directory of Open Access Journals (Sweden)

    Isabel Montero Muradas

    2010-01-01

    Full Text Available El sector turístico es uno de los más dinámicos de nuestra economía que necesita poner en marcha nuevas estrategias para mantener sus niveles de participación en el PIB. El objetivo de este trabajo es determinar, mediante un análisis conjunto probabilístico, utilizando el modelo de Rasch, la importancia relativa de los factores determinantes de la oferta turística de una alianza estratégica entre agencias de viajes: Travel Advisors Guild (TAG. En los resultados se destaca el posicionamiento de las agencias integradas en el TAG, así como los desajustes competitivos internos.

  19. Interacción social y agencia en la disposición cultural universitaria

    Directory of Open Access Journals (Sweden)

    Rosa Mirian Caamaño Zambrano

    2017-07-01

    Full Text Available El objetivo del artículo es revelar sistemas de acciones en la enseñanza e investigación, sustentado en habilidades culturales. Para la estrategia metodológica se realizó la revisión bibliográfica de la interacción social basada en la observación de la comunidad universitaria. El resultado conduce a la teoría de la agencia, promoción y orientación de la acción en la sociedad, con desafíos al aprendizaje desde un rol comprensivo de los profesores. Se propone reflexionar acerca de la importancia y vías de la agencia cultural universitaria, los impactos que el proceso extensionista produce en la interacción social, y los efectos que provoca sobre los objetivos curriculares.

  20. El papel de las agencias de seguros en la competencia entre compañías aseguradoras

    Directory of Open Access Journals (Sweden)

    Leonardo Medrano

    2008-01-01

    Full Text Available Este artículo estudia el mercado de seguros cuando las compañías aseguradoras (aseguradoras venden sus pólizas por medio de agencias de seguros (agencias o agentes. Analiza los efectos de las comisiones por ventas pagadas a las agencias en las primas de seguros y en el bienestar del consumidor. Se considera el comportamiento oportunista de las agencias al vender las pólizas emitidas por la aseguradora que le ofrece la comisión mas alta. Se consideran también diferentes estructuras de mercado: un duopolio de aseguradoras que compiten en comisiones (competencia entre aseguradoras, la colusión entre aseguradoras con las agencias manteniendose independientes (colusión horizontal o monopolio de aseguradoras y la colusión entre aseguradoras y agencias (integración vertical o agentes exclusivos. Mostramos que la competencia entre aseguradoras y la integración vertical generan primas más altas que la colusión horizontal. Además, mostramos que la comisión óptima desde del punto de vista del consumidor pueda ser mayor que la comisión generada por cualquiera de las tres estructuras de mercado antes señaladas

  1. Radiation control system of nuclear power plants

    International Nuclear Information System (INIS)

    Kapisovsky, V.; Kosa, M.; Melichar, Z.; Moravek, J.; Jancik, O.

    1977-01-01

    The SYRAK system is being developed for in-service radiation control of the V-1 nuclear power plant. Its basic components are an EC 1010 computer, a CAMAC system and communication means. The in-service release of radionuclides is measured by fuel can failure detection, by monitoring rare gases in the coolant, by gamma spectrometric coolant monitoring and by iodine isotopes monitoring in stack disposal. (O.K.)

  2. Wavelet network controller for nuclear steam generators

    International Nuclear Information System (INIS)

    Habibiyan, H; Sayadian, A; Ghafoori-Fard, H

    2005-01-01

    Poor control of steam generator water level is the main cause of unexpected shutdowns in nuclear power plants. Particularly at low powers, it is a difficult task due to shrink and swell phenomena and flow measurement errors. In addition, the steam generator is a highly complex, nonlinear and time-varying system and its parameters vary with operating conditions. Therefore, it seems that design of a suitable controller is a necessary step to enhance plant availability factor. The purpose of this paper is to design, analyze and evaluate a water level controller for U-tube steam generators using wavelet neural networks. Computer simulations show that the proposed controller improves transient response of steam generator water level and demonstrate its superiority to existing controllers

  3. USAEC Controls for Nuclear Criticality Safety

    Energy Technology Data Exchange (ETDEWEB)

    McCluggage, W. C. [Division of Operational Safety, United States Atomic Energy Commission Washington, DC (United States)

    1966-05-15

    This is a paper written to provide a broad general view of the United States Atomic Energy Commission's controls for nuclear criticality safety within its own facilities. Included also is a brief' discussion of the USAEC's methods of obtaining assurance that the controls are being applied. The body of the document contains three sections. The first two describe the functions of the USAEC; the third deals with the contractors. The provisions of the Atomic Energy Act applicable to health and safety are discussed in relation to nuclear criticality safety. The use of United States Atomic Energy Commission manual chapters and Federal regulations is described. The functions of the USAEC Headquarters' offices and the operations offices are briefly outlined. Comments regarding the USAEC's inspection, auditing and appraisal programmes are included. Also briefly mentioned are the basic qualifications which must be met to become a contractor to possess and process or use fissionable materials. On the plant, factory or facility level the duties and responsibilities of industrial management are briefly outlined. The fundamental standards and their origin, together with the principal documents and guides are mentioned. The chief methods of control used by contractors operating large USAEC facilities and plants are described and compared. These include diagrams of how a typical nuclear criticality safety problem is handled from inception, design, construction and finally plant operation. Also included is a brief discussion of the contractors' methods of assuring strict employee compliance with the operating rules and limits. (author)

  4. Nuclear fuel control in fuel fabrication plants

    International Nuclear Information System (INIS)

    Seki, Yoshitatsu

    1976-01-01

    The basic control problems of measuring uranium and of the environment inside and outside nuclear fuel fabrication plants are reviewed, excluding criticality prevention in case of submergence. The occurrence of loss scraps in fabrication and scrap-recycling, the measuring error, the uranium going cut of the system, the confirmation of the presence of lost uranium and the requirement of the measurement control for safeguard make the measurement control very complicated. The establishment of MBA (material balance area) and ICA (item control area) can make clearer the control of inventories, the control of loss scraps and the control of measuring points. Besides the above basic points, the following points are to be taken into account: 1) the method of confirmation of inventories, 2) the introduction of reliable NDT instruments for the rapid check system for enrichment and amount of uranium, 3) the introduction of real time system, and 4) the clarification of MUF analysis and its application to the reliability check of measurement control system. The environment control includes the controls of the uranium concentration in factory atmosphere, the surface contamination, the space dose rate, the uranium concentration in air and water discharged from factories, and the uranium in liquid wastes. The future problems are the practical restudy of measurement control under NPT, the definite plan of burglary protection and the realization of the disposal of solid wastes. (Iwakiri, K.)

  5. History of controlled nuclear fusion in Japan

    International Nuclear Information System (INIS)

    Uematsu, Eisui; Nishio, Shigeko; Takeda, Tatsuoki

    2001-01-01

    A research development of nuclear fusion was divided four periods: the first period as prehistory (until about 1955), the second period as begin of research (1955 to 1969), the third as the growth period (1970 to 1985) and the forth as the large tokamak age. In this paper I explained the second period, because general physicists and young plasma and controlled nuclear fusion researcher did not know about this period. The controlled nuclear fusion research was begun by the experiment of hydrogen bomb by USA and USSR in 1952 and 1953. In Japan, on the basis of many societies, 'The Controlled Nuclear Fusion Meeting' was established as an independent system and KAKEA (Journal of Fusion Research) was published in 1958. Japan government began to make the system by the Nuclear Commission in 1957. The main research devices in 1962 were linear pinch, mirror device, toroidal pinch, helical system, plasma gun and plasma measurement. USSR showed the excellent results of tokamak device in 1968. Ookawa spoke the effect of the average minimum-B, the best report in this period, at the second IAEA meeting, 1965. JAERI constructed JFT-1 and JFT-2, the latter was the first class device in the world and made the first step of Japanese research into the world, for examples, to attain the equilibrium of divertor plasma and to control impurity. Many research centers of controlled fusion were established in many universities in Japan from 1966 to 1980. Cooperation researchs between Japan and USA, USSR and many countries has been carried out after 1978: JIFT (Joint Institute for Fusion Theory) and FPPC (Fusion Power Coordinating Committee). The important results increased in this period. After 1985, the research activities are processing and data increased very fast depend on the larger devices and system, good measurement system and development of information system. JT-60 in JAERI opened to the large tokamak period. It led controlled fusion researchs in the world the same as TFTR (US

  6. Prospectiva en agencias de viajes: una revisión de la literatura

    Directory of Open Access Journals (Sweden)

    Rosa del Carmen Cortés Bello

    2018-05-01

    Full Text Available En los últimos años, la industria turística ha experimentado cambios entre sus diferentes agentes, formas de comercialización y beneficios obtenidos para el consumidor. Para las agencias de viajes tradicionales, su entrada al canal de distribución online ha representado una gran transformación. Este artículo pone en evidencia la escasa investigación para eliminar la incertidumbre causada por el futuro. Se identificaron 50 artículos relacionados con estudios de futuro, turismo y agencias de viajes; su análisis y categorías permitieron distinguir las perspectivas que se han abordado y las futuras líneas de investigación. Los artículos se dividieron en cuatro rubros: estudios de futuro, estudios de tendencias, estudios de prospectiva y estudios de agencias de viajes. Se destaca la importancia de utilizar los instrumentos de la prospectiva estratégica para la toma de decisiones en el presente y así incidir en la construcción del escenario apuesta o futurible, tal como lo plantea la escuela voluntarista de la prospectiva.

  7. Agencia de autocuidado en hipertensos usuarios de un hospital universitario en Cúcuta (Colombia

    Directory of Open Access Journals (Sweden)

    Olga Marina Vega Angarita

    2014-01-01

    Full Text Available Objetivo: El objetivo de este estudio fue describir la capacidad de agencia de autocuidado de hipertensos usuarios del servicio de consulta externa del Hospital Universitario Erasmo Meoz, en Cúcuta. Materiales y métodos: Estudio descriptivo transversal de corte cuantitativo, realizado durante el primer semestre de 2012; la muestra por conveniencia estuvo conformada por 65 hipertensos, a quienes, previa verificación del cumplimiento de requisitos, les fue aplicado la escala “Apreciación de la agencia de autocuidado”. Resultados: A nivel general se reportó que el 83.1 % de los pacientes presentó una capacidad de autocuidado baja; el 6.2 % mediana capacidad y solo el 10.7 % una capacidad alta. Con igual tendencia se reportaron las categorías “promoción y funcionamiento del desarrollo personal”, “interacción personal” y “actividad” y “reposo”. Conclusiones: Los hallazgos obtenidos en este estudio permiten apreciar de manera global la afectación de la capacidad de agencia de autocuidado en los participantes; hecho que ratifica la importancia del trabajo contundente de enfermería en el fortalecimiento de estas personas como seres capaces de usar la razón para comprender su estado de salud, tomar decisiones para la acción específica y generar comportamientos favorables hacia su propio cuidado.

  8. Mechanical and thermal properties of bacterial-cellulose-fibre-reinforced Mater-Bi(®) bionanocomposite.

    Science.gov (United States)

    Nainggolan, Hamonangan; Gea, Saharman; Bilotti, Emiliano; Peijs, Ton; Hutagalung, Sabar D

    2013-01-01

    The effects of the addition of fibres of bacterial cellulose (FBC) to commercial starch of Mater-Bi(®) have been investigated. FBC produced by cultivating Acetobacter xylinum for 21 days in glucose-based medium were purified by sodium hydroxide 2.5 wt % and sodium hypochlorite 2.5 wt % overnight, consecutively. To obtain water-free BC nanofibres, the pellicles were freeze dried at a pressure of 130 mbar at a cooling rate of 10 °C min(-1). Both Mater-Bi and FBC were blended by using a mini twin-screw extruder at 160 °C for 10 min at a rotor speed of 50 rpm. Tensile tests were performed according to ASTM D638 to measure the Young's modulus, tensile strength and elongation at break. A field emission scanning electron microscope was used to observe the morphology at an accelerating voltage of 10 kV. The crystallinity (T c) and melting temperature (T m) were measured by DSC. Results showed a significant improvement in mechanical and thermal properties in accordance with the addition of FBC into Mater-Bi. FBC is easily incorporated in Mater-Bi matrix and produces homogeneous Mater-Bi/FBC composite. The crystallinity of the Mater-Bi/FBC composites decrease in relation to the increase in the volume fraction of FBC.

  9. Mechanical and thermal properties of bacterial-cellulose-fibre-reinforced Mater-Bi® bionanocomposite

    Directory of Open Access Journals (Sweden)

    Hamonangan Nainggolan

    2013-05-01

    Full Text Available The effects of the addition of fibres of bacterial cellulose (FBC to commercial starch of Mater-Bi® have been investigated. FBC produced by cultivating Acetobacter xylinum for 21 days in glucose-based medium were purified by sodium hydroxide 2.5 wt % and sodium hypochlorite 2.5 wt % overnight, consecutively. To obtain water-free BC nanofibres, the pellicles were freeze dried at a pressure of 130 mbar at a cooling rate of 10 °C min−1. Both Mater-Bi and FBC were blended by using a mini twin-screw extruder at 160 °C for 10 min at a rotor speed of 50 rpm. Tensile tests were performed according to ASTM D638 to measure the Young’s modulus, tensile strength and elongation at break. A field emission scanning electron microscope was used to observe the morphology at an accelerating voltage of 10 kV. The crystallinity (Tc and melting temperature (Tm were measured by DSC. Results showed a significant improvement in mechanical and thermal properties in accordance with the addition of FBC into Mater-Bi. FBC is easily incorporated in Mater-Bi matrix and produces homogeneous Mater-Bi/FBC composite. The crystallinity of the Mater-Bi/FBC composites decrease in relation to the increase in the volume fraction of FBC.

  10. Controlled procurement for nuclear power plants

    International Nuclear Information System (INIS)

    MacFarlane, I.S.

    1985-01-01

    A method is presented for establishing a controlled materials management system that facilitates materials procurement at nuclear power plants. This method is based on the determination of informational data requirements, appropriate input and approvals, and extent of administrative controls. Implementation of the techniques described herein will ensure that the accuracy of important procurement information is not compromised by unauthorized initial input or changes and/or failure to maintain the information. Needed material can thus be ordered through the materials management system with a high degree of confidence that the correct items are ordered, with minimal internal lead time and minimum delays during the receiving process

  11. Multivariable control in nuclear power stations

    International Nuclear Information System (INIS)

    Parent, M.; McMorran, P.D.

    1982-12-01

    Linear, state-space models of power plant systems tend to be of high order, leading to difficulties in the design of control systems by state-space methods. However, the control system has access only to the plant inputs and outputs, and the fast-responding internal variables may be masked by slower, dominant variables. Model order reduction applies modal analysis to eliminate the fast modes while retaining the character of the input-output response. Two alternative techniques are presented and demonstrated on a model of a nuclear steam generator. The preferred method is implemented in MVPACK, the computer-aided design package

  12. Nuclear thermal rocket engine operation and control

    International Nuclear Information System (INIS)

    Gunn, S.V.; Savoie, M.T.; Hundal, R.

    1993-06-01

    The operation of a typical Rover/Nerva-derived nuclear thermal rocket (NTR) engine is characterized and the control requirements of the NTR are defined. A rationale for the selection of a candidate diverse redundant NTR engine control system is presented and the projected component operating requirements are related to the state of the art of candidate components and subsystems. The projected operational capabilities of the candidate system are delineated for the startup, full-thrust, shutdown, and decay heat removal phases of the engine operation. 9 refs

  13. Regulatory control of nuclear power plants

    International Nuclear Information System (INIS)

    2002-01-01

    The purpose of this book is to support IAEA training courses and workshops in the field of regulatory control of nuclear power plants as well as to support the regulatory bodies of Member States in their own training activities. The target group is the professional staff members of nuclear safety regulatory bodies supervising nuclear power plants and having duties and responsibilities in the following regulatory fields: regulatory framework; regulatory organization; regulatory guidance; licensing and licensing documents; assessment of safety; and regulatory inspection and enforcement. Important topics such as regulatory competence and quality of regulatory work as well as emergency preparedness and public communication are also covered. The book also presents the key issues of nuclear safety such as 'defence-in-depth' and safety culture and explains how these should be taken into account in regulatory work, e.g. during safety assessment and regulatory inspection. The book also reflects how nuclear safety has been developed during the years on the basis of operating experience feedback and results of safety research by giving topical examples. The examples cover development of operating procedures and accident management to cope with complicated incidents and severe accidents to stress the importance of regulatory role in nuclear safety research. The main target group is new staff members of regulatory bodies, but the book also offers good examples for more experienced inspectors to be used as comparison and discussion basis in internal workshops organized by the regulatory bodies for refreshing and continuing training. The book was originally compiled on the basis of presentations provided during the two regulatory control training courses in 1997 and 1998. The textbook was reviewed at the beginning of the years 2000 and 2002 by IAEA staff members and consistency with the latest revisions of safety standards have been ensured. The textbook was completed in the

  14. Intelligent distributed control for nuclear power plants

    International Nuclear Information System (INIS)

    Klevans, E.H.

    1992-01-01

    This project was initiated in September 1989 as a three year project to develop and demonstrate Intelligent Distributed Control (IDC) for Nuclear Power Plants. The body of this Third Annual Technical Progress report summarizes the period from September 1991 to October 1992. There were two primary goals of this research project. The first goal was to combine diagnostics and control to achieve a highly automated power plant as described by M.A. Schultz. His philosophy, is to improve public perception of the safety of nuclear power plants by incorporating a high degree of automation where a greatly simplified operator control console minimizes the possibility of human error in power plant operations. To achieve this goal, a hierarchically distributed control system with automated responses to plant upset conditions was pursued in this research. The second goal was to apply this research to develop a prototype demonstration on an actual power plant system, the EBR-2 stem plant. Emphasized in this Third Annual Technical Progress Report is the continuing development of the in-plant intelligent control demonstration for the final project milestone and includes: simulation validation and the initial approach to experiment formulation

  15. Nuclear power plant control room operator control and monitoring tasks

    International Nuclear Information System (INIS)

    Bovell, C.R.; Beck, M.G.; Carter, R.J.

    1998-01-01

    Oak Ridge National Laboratory is conducting a research project the purpose of which is to develop the technical bases for regulatory review criteria for use in evaluating the safety implications of human factors associated with the use of artificial intelligence and expert systems, and with advanced instrumentation and control (I and C) systems in nuclear power plants (NPP). This report documents the results from Task 8 of that project. The primary objectives of the task was to identify the scope and type of control and monitoring tasks now performed by control-room operators. Another purpose was to address the types of controls and safety systems needed to operate the nuclear plant. The final objective of Task 8 was to identify and categorize the type of information and displays/indicators required to monitor the performance of the control and safety systems. This report also discusses state-of-the-art controls and advanced display devices which will be available for use in control-room retrofits and in control room of future plants. The fundamental types of control and monitoring tasks currently conducted by operators can be divided into four classifications: function monitoring tasks, control manipulation tasks, fault diagnostic tasks, and administrative tasks. There are three general types of controls used in today's NPPs, switches, pushbuttons, and analog controllers. Plant I and C systems include components to achieve a number of safety-related functions: measuring critical plant parameters, controlling critical plant parameters within safety limits, and automatically actuating protective devices if safe limits are exceeded. The types of information monitored by the control-room operators consist of the following parameters: pressure, fluid flow and level, neutron flux, temperature, component status, water chemistry, electrical, and process and area radiation. The basic types of monitoring devices common to nearly all NPP control rooms include: analog meters

  16. Control rod for a nuclear reactor

    International Nuclear Information System (INIS)

    Roman, W.G.; Sutton, H.G. Jr.

    1976-01-01

    A control rod assembly for a nuclear reactor is disclosed having a remotely disengageable coupling between the control rod and the control rod drive shaft. The coupling is actuated by first lowering then raising the drive shaft. The described motion causes axial repositioning of a pin in a grooved rotatable cylinder, each being attached to different parts of the drive shaft which are axially movable relative to each other. In one embodiment, the relative axial motion of the parts of the drive shaft is used either to couple or to uncouple the connection by forcing resilent members attached to the drive shaft into or out of shouldered engagement, respectively, with an indentation formed in the control rod

  17. Control rod for a nuclear reactor

    Science.gov (United States)

    Roman, Walter G.; Sutton, Jr., Harry G.

    1979-01-01

    A control rod assembly for a nuclear reactor is disclosed having a remotely disengageable coupling between the control rod and the control rod drive shaft. The coupling is actuated by first lowering then raising the drive shaft. The described motion causes axial repositioning of a pin in a grooved rotatable cylinder, each being attached to different parts of the drive shaft which are axially movable relative to each other. In one embodiment, the relative axial motion of the parts of the drive shaft is used either to couple or to uncouple the connection by forcing resilient members attached to the drive shaft into or out of shouldered engagement, respectively, with an indentation formed in the control rod.

  18. Fuzzy controllers in nuclear material accounting

    International Nuclear Information System (INIS)

    Zardecki, A.

    1994-01-01

    Fuzzy controllers are applied to predicting and modeling a time series, with particular emphasis on anomaly detection in nuclear material inventory differences. As compared to neural networks, the fuzzy controllers can operate in real time; their learning process does not require many iterations to converge. For this reason fuzzy controllers are potentially useful in time series forecasting, where the authors want to detect and identify trends in real time. They describe an object-oriented implementation of the algorithm advanced by Wang and Mendel. Numerical results are presented both for inventory data and time series corresponding to chaotic situations, such as encountered in the context of strange attractors. In the latter case, the effects of noise on the predictive power of the fuzzy controller are explored

  19. Control rod for a nuclear reactor

    International Nuclear Information System (INIS)

    Roman, W.G.; Sutton, H.G. Jr.

    1979-01-01

    A control rod assembly for a nuclear reactor is disclosed having a remotely disengageable coupling between the control rod and the control rod drive shaft. The coupling is actuated by first lowering then raising the drive shaft. The described motion causes axial repositioning of a pin in a grooved rotatable cylinder, each being attached to different parts of the drive shaft which are axially movable relative to each other. In one embodiment, the relative axial motion of the parts of the drive shaft is used either to couple or to uncouple the connection by forcing resilient members attached to the drive shaft into or out of shouldered engagement, respectively, with an indentation formed in the control rod

  20. Dynamics and control in nuclear power stations

    International Nuclear Information System (INIS)

    Butterfield, M.H.

    1992-01-01

    This volume presents a wide view of aspects of control of nuclear power stations by taking into consideration the plant as a whole and the protection systems employed therein. Authors with worldwide experience consider all aspects of dynamics and control in the context of both fast and thermal power stations. The topics discussed include the methods of development and applications within the analysis of plant behaviour, the validation of mathematical models, plant testing, and the design and implementation of controls. There are 27 papers all of which are indexed separately; steady states and model evolution (5 papers), control and protection systems (5 papers), transients (7 papers), testing and data (3 papers), model validation (6 papers) and commissioning and operation (1 paper). (author)

  1. Lectin histochemistry and alkaline phosphatase activity in the pia mater vessels of spontaneously hypertensive rats (SHR).

    Science.gov (United States)

    Szumańska, G; Gadamski, R

    1992-01-01

    Some lectins were used to study the localization of sugar residues on the endothelial cell surface in the pia mater blood vessels of control (WKY) and hypertensive rats (SHR). The lectins tested recognized the following residues: beta-D-galactosyl (Ricinus communis agglutinin 120, RCA-1), alpha-L-fucosyl (Ulex europaeus agglutinin, UEA-1), N-acetylglucosaminyl and sialyl (Wheat germ agglutinin, WGA), N-glycolyl-neuraminic acid (Limax flavus agglutinin, LFA), and N-acetyl-D-galactosaminyl (Helix pomatia agglutinin, HPA). Several differences were revealed in the presence of sugar receptors on the surface of endothelial cells between the control and the hypertensive rats. Our studies showed also differences in the localization of the tested glycoconjugates between pial capillaries, small, medium-size and large pial arteries. The histochemical evaluation of alkaline phosphatase revealed an increased activity of the enzyme in the pial vessels of SHRs as compared with control rats with a similar localization of the enzyme activity. Some differences in the distribution of lectin binding sites and alkaline phosphatase activity could be associated with the different functions of particular segments of the pial vascular network.

  2. La agencia de medios en el nuevo escenario comunicativo / Media agency in the new communicative scenario

    Directory of Open Access Journals (Sweden)

    Araceli Castelló Martínez

    2014-12-01

    Full Text Available La industria comunicativa vive un periodo de cambios profundos a los que la agencia de medios, uno de los actores principales en el mercado publicitario, no ha permanecido ajena. La transmedialidad de los contenidos, los nuevos formatos publicitarios en los diferentes medios, el engagement que demanda el anunciante o el fomento de la experiencia del usuario, entre otros aspectos, han revolucionado la definición de las estrategias de medios. Los objetivos del presente artículo pasan por analizar el papel actual de la agencia de medios en el mercado publicitario y estudiar las características de las estrategias de medios en el presente contexto comunicativo así como su integración en las estrategias de comunicación. La metodología se basa en una revisión bibliográfica de publicaciones dedicadas a la planificación publicitaria y la agencia de medios en base a una serie de palabras clave y en un análisis de los servicios que ofrecen las agencias de medios en sus páginas web. Los resultados destacan el papel estratégico que ha adquirido la agencia de medios en el actual escenario comunicativo, por una parte, y la integración y la transmedialidad que caracterizan hoy en día a las estrategias de medios, por otra. Abstract Communication industry lives a period of profound changes that the media agency, one of the key players in the advertising market, has not remained apart from. Transmediality of contents, new advertising formats in the various media, the engagement that advertisers demand or the encouragement of the users experience, among others, have revolutionized the definition of media strategies.The goals of the present article focus on analyzing the current role of the media agency in the advertising market and studying the characteristics of media strategies in the present communicative context as well as their integration in communication strategies. The methodology is based on a literature review of publications devoted to

  3. Nuclear exports. Parliamentary control and confidentiality

    International Nuclear Information System (INIS)

    Feldmann, Ulrike

    2015-01-01

    With its decision taken on 21. October 2014 (Az.: 2 BvE 5/11) the Federal Constitutional Court (BVerfG) decided during court proceedings between administrative bodies on the scope and limits of the parliamentary right of information. Even though the proceeding did not deal with nuclear exports but arm exports, foreign trade law, however, does not only designate an export licence obligation for military weapons but also for so called dual-use goods meaning goods, which can be used both for friendly as well as for military purposes. The export of these goods requires according to the so-called Dual-Use Regulation (EG) 428/2009 a licence. Annex I category 0 of the regulation (EG) 428/2009 lists a variety of nuclear materials, plants and equipment items for which this licence applies. In the same manner as arm exports, also exports of nuclear dual-use goods are being discussed in a special cabinet committee, the Federal Security Council (BSR), which shall coordinate cross-departmentally the German security and defence policy under consideration of economic interests and which categorises its results, according to the rules of procedure, as confidential. Also legally not regulated but common ''preliminary enquiries'' at the responsible Federal Ministry or rather Federal Office of Economics and Export Control by companies which plan an export and want to affirm the general approval for their export business prior to conclusion of contract take not only place for arm exports but also for nuclear dual-use goods. The decision by the Federal Constitutional Court can be applied to consultations about the authorisation of nuclear dual-use goods.

  4. The development of controlled nuclear fusion

    International Nuclear Information System (INIS)

    Pease, R.S.

    1978-01-01

    The high temperature conditions needed in a controlled nuclear fusion reactor are now being approached in experiments using magnetic fields to confine and isolate the plasma, especially in systems of the tokamak type. The underlying reasons for the successes are discussed and it is concluded that the remaining advances needed in temperature and thermal insulation may well be achieved in new large tokamak experiments now under construction. Comparable progress is being made also in inertial confinement systems; key experiments on achieving the required super-high densities with high-powered pulsed laser systems are about to commence. To achieve fusion reactors will require the combination of three major disciplines: plasma physics, electromechanical engineering and nuclear engineering. Proposals have been made for an international study group to be set up under the IAEA auspices to consider technical objectives and the nature of the next large fusion device which could be constructed internationally, and in which this synthesis could be attempted. (author)

  5. Magnetic nuclear core restraint and control

    International Nuclear Information System (INIS)

    Cooper, M.H.

    1979-01-01

    A lateral restraint and control system for a nuclear reactor core adaptable to provide an inherent decrease of core reactivity in response to abnormally high reactor coolant fluid temperatures. An electromagnet is associated with structure for radially compressing the core during normal reactor conditions. A portion of the structures forming a magnetic circuit are composed of ferromagnetic material having a curie temperature corresponding to a selected coolant fluid temperature. Upon a selected signal, or inherently upon a preselected rise in coolant temperature, the magnetic force is decreased a given amount sufficient to relieve the compression force so as to allow core radial expansion. The expanded core configuration provides a decreased reactivity, tending to shut down the nuclear reaction

  6. Magnetic nuclear core restraint and control

    International Nuclear Information System (INIS)

    Cooper, M.H.

    1979-01-01

    A lateral restraint and control systemm for a nuclear reactor core provides an inherent decrease of core reactivity in response to abnormally high reactor coolant fluid temperatures. An electromagnet is associated with structure for radially compressing the core during normal reactor conditions. A portion of the structures forming a magnetic circuit is composed of ferromagnetic material having a curie temperature corresponding to a selected coolant fluid temperature. Upon a selected signal, or inherently upon a preselected rise in coolant temperature, the magnetic force is decreased by an amount sufficient to relieve the compression force so as to allow core radial expansion. The expanded core configuration provides a decreased reactivity, tending to shut down the nuclear reaction

  7. Magnetic nuclear core restraint and control

    International Nuclear Information System (INIS)

    Cooper, M.H.

    1978-01-01

    Disclosed is a lateral restraint and control system for a nuclear reactor core adaptable to provide an inherent decrease of core reactivity in response to abnormally high reactor coolant fluid temperatures. An electromagnet is associated with structure for radially compressing the core during normal reactor conditions. A portion of the structures forming a magnetic circuit are composed of ferromagnetic material having a curie temperature corresponding to a selected coolant fluid temperature. Upon a selected signal, or inherently upon a preselected rise in coolant temperature, the magnetic force is decreased a given amount sufficient to relieve the compression force so as to allow core radial expansion. The expanded core configuration provides a decreased reactivity, tending to shut down the nuclear reaction

  8. Areas control of a nuclear medicine service

    International Nuclear Information System (INIS)

    Silva, Islane C.S.; Silva, Iasmim M.S.; Júnior, Cláudio L.R.; Silva, Isvânia S.; Gonzalez, Kethyllém M.; Melo, Francisca A.; Lima, Fernando R.A.

    2017-01-01

    The measurement of the exposure rate of the sectors of a nuclear medicine service (NMS), with the purpose of establishing safety to the service workers and the public, classifying the areas according to the monitoring is presented. Following the studies on the classifications of the areas of a Nuclear Medicine service provided by the category regulatory standard, 3.05 CNEN-NN, measures were taken in all sectors of the NMS in order to classify the areas in: Free, controlled and supervised according to with the exposure level. As a measurement instrument, a Geiger-Muller counter of the digital type was used. The results obtained show a correlation with the Brazilian norm satisfactorily, referring to the exposure rate of the studied SMN sectors

  9. Nuclear outages: an approach to project controls

    International Nuclear Information System (INIS)

    Bryson, R.

    1985-01-01

    The annual budget for maintaining and operating a nuclear power plant has risen dramatically over the past 5 years. NRC-mandated plant improvements and outage related expenses are often cited to be the main contributors to these escalating budgets. Nuclear utilities have responded by developing programs to improve plant availability and outage costs through improved outage performance. Utilities recognize that for capital improvements the program to control costs does no begin with outage planning, but rather more appropriately up front during the engineering phase. To support their management objectives, utilities have been developing comprehensive project control systems for concurrently reducing capital expenditures, outage-related costs, and time. This paper provides an approach to project controls that, rather than using one all inclusive comprehensive system, requires five separate monitoring systems - one for each phase of an activity's life cycle. Through the integration of these discrete but interrelated systems, utility management acquires the necessary tools for comprehensive planning and control of their modification program and effective detailed monitoring for all outage-related activities

  10. Nuclear Power Plant Control and Instrumentation 1989

    International Nuclear Information System (INIS)

    1990-11-01

    The meeting of the International Working Group on Nuclear Power Plant Control and Instrumentation (IWG-NPPCI) was organized in order to summarize operating experience of nuclear power plant control systems, gain a general overview of activities in development of modern control systems and receive recommendations on the further directions and particular measures within the Agency's programme. The meeting was held at the IAEA Headquarters in Vienna and was attended by 21 national delegates and observers from 18 countries. The present volume contains: (1) report on the meeting of the IWG-NPPCI, Vienna, 8-10 May 1989, (2) report of the scientific secretary on the major activities of IAEA during 1987-89 in the NPPCI area, (3) terms of reference International Working Group on NPPCI and (4) reports of the national representatives to the International Working Group on NPPCI. The paper and discussions with practical experience and described actual problems encountered. Emphasis was placed on the technical, industrial and economical aspects of the introduction of modern control systems and on the improvement of plant availability and safety. A separate abstract was prepared for each of the 19 papers presented by members of the International Working Group. Refs, figs and tabs

  11. Intelligent distributed control for nuclear power plants

    International Nuclear Information System (INIS)

    Klevans, E.H.; Edwards, R.M.; Ray, A.; Lee, K.Y.; Garcia, H.E.: Chavez, C.M.; Turso, J.A.; BenAbdennour, A.

    1991-01-01

    In September of 1989 work began on the DOE University Program grant DE-FG07-89ER12889. The grant provides support for a three year project to develop and demonstrate Intelligent Distributed Control (IDC) for Nuclear Power Plants. The body of this Second Annual Technical Progress report covers the period from September 1990 to September 1991. It summarizes the second year accomplishments while the appendices provide detailed information presented at conference meetings. These are two primary goals of this research. The first is to combine diagnostics and control to achieve a highly automated power plant as described by M.A. Schultz, a project consultant during the first year of the project. This philosophy, as presented in the first annual technical progress report, is to improve public perception of the safety of nuclear power plants by incorporating a high degree automation where greatly simplified operator control console minimizes the possibility of human error in power plant operations. A hierarchically distributed control system with automated responses to plant upset conditions is the focus of our research to achieve this goal. The second goal is to apply this research to develop a prototype demonstration on an actual power plant system, the EBR-II steam plant

  12. Problemas de agencia en la educación básica en México: un diagnóstico institucional

    Directory of Open Access Journals (Sweden)

    Reynaldo Angulo Cázares

    2018-05-01

    Full Text Available Dada la centralidad que la reforma educativa del Pacto por México pone a las reglas del juego ―vis a vis conducta docente―, este artículo examina el diseño institucional que le precede. Se problematizaron afirmaciones de que el diseño previo creaba problemas de agencia. El objetivo fue demostrar la configuración de un tipo específico de problema de agencia: el riesgo moral organizacional. Se de-construyó la normatividad con la Herramienta de la Gramática Institucional de Crawford y Ostrom (1995. El IGT permite identificar sistemáticamente las reglas presentes ―si las hubiere― en documentos de políticas, develando el código genético de las políticas que configuran arenas, lugar en que los individuos interactúan. Se encontró que la forma en que se estructura el control administrativo en los planteles en relación a la aplicación de sanciones a maestros constituye una situación de riesgo moral dado sus supuestos.

  13. Locus of Control and Likelihood of Nuclear War: Two Studies.

    Science.gov (United States)

    Erdahl, Paul; Rounds, James B.

    The Nuclear Locus of Control (NLOC) scales were constructed to assess beliefs as to whether nuclear war and nuclear policy decisions are, or can be, influenced by oneself, powerful others, or chance. Three scales measuring internal, powerful others, and chance nuclear LOC show internal consistency estimates (Cronbach's Alpha) of .87, .76, and .85,…

  14. Control rod guide tube of nuclear reactor

    International Nuclear Information System (INIS)

    Suda, Yoshitaka; Ito, Kenji; Matsumoto, Kunio.

    1994-01-01

    Zr having a residual tensile stress of 3 to 10kg/mm 2 in a circumferential direction is used for the main ingredient of a control guide tube of a nuclear reactor. For this purpose, an appropriate correction method such as a roll-correction, tension-correction and press-correction method is applied to an existent Zr-base alloy tube with no substantial residual stress. If the residual tensile stress in the circumferential direction is smaller than 3kg/mm 2 , an effect sufficient to suppress irradiation growth is not obtainable, if it exceeds 10kg/mm 2 , dimensional changes, cracks or the like occurs locally since the wall thickness of the control rod guide tube is small and, accordingly, this often results in failed products as the control guide tube. (N.H.)

  15. Feedwater control system in nuclear power plants

    International Nuclear Information System (INIS)

    Masuyama, Hideo.

    1981-01-01

    Purpose: To enable switching operation for feedwater systems in a short time and with no fluctuations in the reactor water level by increasing or decreasing the flow rate in the feedwater systems during automatic operation by the amount of the fluctuations in the flow rate in the feedwater system during manual operation. Constitution: In a BWR type nuclear power plant having a plurality of feedwater systems to a nuclear reactor, a feedwater control system is constituted with a reactor water level controller, a M/A switcher for switching either of automatic flow rate demand signals or manual flow rate set signals from the reactor level controller to apply flow rate demand signals for each of the feedwater systems, a calculation device for calculating the flow rate set signals in the feedwater systems during manual operation and an adder for subtracting the flow rate set signals in the manual feedwater system calculated in the calculating device from the automatic flow rate demand signals for the feedwater systems during automatic operation. This enables rapid switching for the feedwater systems with no fluctuations in the reactor water level by increasing or decreasing the flow rate in the feedwater systems during automatic operation by the amount of fluctuations in the flow rate in the feedwater systems during manual operation and compensating the effects in upon manual and automatic switching by the M/A switcher. (Seki, T.)

  16. Instrumentation control system in nuclear power plant

    International Nuclear Information System (INIS)

    Hanai, Koi; Tai, Ichiro.

    1982-01-01

    Purpose: To improve the reliability of instrumentation control system in a nuclear power plant by using an optical fiber cable as a transmission path between a multiplexer and a central control room to thereby eliminate noises resulted from electromagnetic inductions or the likes. Constitution: Signals from neutron detectors are sent by way of ceramic-insulated cables to pre-amplifiers disposed outside of the pressure vessel of a nuclear reactor, converted into voltage pulse signals and then sent by way of coaxial cables to a multiplexer. The multiplexer receives a plurality of voltage pulse signals corresponding to the neutron detectors respectively, converts them into a time-shared electric signal train and sends it to an optical pulse transmitter. The transmitter converts the supplied signals into an optical pulse signal train corresponding to the electric signal train from the multiplexer and sends it by way of an optical fiber cable to an optical pulse receiver disposed in a central control room. (Kawakami, Y.)

  17. Corrosion control in CANDU nuclear power reactors

    International Nuclear Information System (INIS)

    Lesurf, J.E.

    1974-01-01

    Corrosion control in CANDU reactors which use pressurized heavy water (PHW) and boiling light water (BLW) coolants is discussed. Discussions are included on pressure tubes, primary water chemistry, fuel sheath oxidation and hydriding, and crud transport. It is noted that corrosion has not been a significant problem in CANDU nuclear power reactors which is a tribute to design, material selection, and chemistry control. This is particularly notable at the Pickering Nuclear Generating Station which will have four CANDU-PHW reactors of 540 MWe each. The net capacity factor for Pickering-I from first full power (May 1971) to March 1972 was 79.5 percent, and for Pickering II (first full power November 1971) to March 1972 was 83.5 percent. Pickering III has just reached full power operation (May 1972) and Pickering IV is still under construction. Gentilly CANDU-BLW reached full power operation in May 1972 after extensive commissioning tests at lower power levels with no major corrosion or chemistry problems appearing. Experience and operating data confirm that the value of careful attention to all aspects of corrosion control and augur well for future CANDU reactors. (U.S.)

  18. Apparatus for controlling nuclear core debris

    Science.gov (United States)

    Jones, Robert D.

    1978-01-01

    Nuclear reactor apparatus for containing, cooling, and dispersing reactor debris assumed to flow from the core area in the unlikely event of an accident causing core meltdown. The apparatus includes a plurality of horizontally disposed vertically spaced plates, having depressions to contain debris in controlled amounts, and a plurality of holes therein which provide natural circulation cooling and a path for debris to continue flowing downward to the plate beneath. The uppermost plates may also include generally vertical sections which form annular-like flow areas which assist the natural circulation cooling.

  19. Collective control of a nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Rognin, L

    1995-06-01

    Nowadays, mainly related to the increasing complexity of working environments, working activities become more and collective. The present research on the paradoxical nature of working teams, considered from a reliability point of view. This document is composed of four Sections. The first Section introduces the context of the research, its objectives and the underlying assumptions. In the second Section, we describe a working situation, which is the control of a nuclear reactor. Relations between cooperative work and reliability are discussed in the third Section. Finally, in the fourth Section, a synthesis of the research and some perspectives are proposed. (authors). 7 refs.

  20. Collective control of a nuclear reactor

    International Nuclear Information System (INIS)

    Rognin, L.

    1995-06-01

    Nowadays, mainly related to the increasing complexity of working environments, working activities become more and collective. The present research on the paradoxical nature of working teams, considered from a reliability point of view. This document is composed of four Sections. The first Section introduces the context of the research, its objectives and the underlying assumptions. In the second Section, we describe a working situation, which is the control of a nuclear reactor. Relations between cooperative work and reliability are discussed in the third Section. Finally, in the fourth Section, a synthesis of the research and some perspectives are proposed. (authors). 7 refs

  1. Intelligent distributed control for nuclear power plants

    International Nuclear Information System (INIS)

    Klevans, E.H.

    1993-01-01

    This project was initiated in September 1989 as a three year project to develop and demonstrate Intelligent Distributed Control (IDC) for Nuclear Power Plants. There were two primary goals of this research project. The first goal was to combine diagnostics and control to achieve a highly automated power plant as described by M.A. Schultz. The second goal was to apply this research to develop a prototype demonstration on an actual power plant system, the EBR-2 steam plant. Described in this Final (Third Annual) Technical Progress Report is the accomplishment of the project's final milestone, an in-plant intelligent control experiment conducted on April 1, 1993. The development of the experiment included: simulation validation, experiment formulation and final programming, procedure development and approval, and experimental results. Other third year developments summarized in this report are: (1) a theoretical foundation for Reconfigurable Hybrid Supervisory Control, (2) a steam plant diagnostic system, (3) control console design tools and (4) other advanced and intelligent control

  2. Quality control of nuclear medicine instruments

    International Nuclear Information System (INIS)

    1984-11-01

    This document, which gives detailed guidance on the quality control of the various electronic instruments used for radiation detection and measurement in nuclear medicine, stems from the work of two Advisory Groups convened by the International Atomic Energy Agency (IAEA). A preliminary document, including recommended test schedules but lacking actual protocols for the tests, was drawn up by the first of these groups, meeting at the IAEA Headquarters in Vienna in 1979. A revised and extended version, incorporating recommended test protocols, was prepared by the second Group, meeting likewise in Vienna in 1982. This version is the model for the present text. The document should be of value to all nuclear medicine units, and especially to those in developing countries, in the initiation or revision of schemes for the quality control of their instruments. Its recommendations have provided the basis for instruction in two IAEA regional technical co-operation projects in the subject field, one initiated in 1981 for countries of Latin America and one initiated in 1982 for countries of Asia and the Pacific

  3. Propuesta de Cuadro Mando Integral para la Agencia de Viajes Destinos S.A.

    OpenAIRE

    Hernández Gómez, Christian

    2006-01-01

    Tesis de maestría -- Universidad de Costa Rica. Posgrado en Administración y Dirección de Empresas. Maestría Profesional en Administración y Dirección de Empresas con énfasis en Gerencia, 2006 El objetivo general de esta investigación es diseñar un plan de Cuadro de Mando Integral para la generación de indicadores de gestión, con el fin de optimizar la toma de decisiones de los ejecutivos de la Agencia de Viajes Destinos S. A. y así mejorar la ren...

  4. Estrategias de marketing online: El caso de las agencias de viajes en Argentina

    OpenAIRE

    Ponziani, Denise

    2013-01-01

    La presente investigación pretende conocer el grado de implementación de estrategias de marketing online que tienen las agencias de viajes de Argentina hoy en día, con el fin de determinar cuáles son las más utilizadas y por qué. A partir de allí, se analizan dichas estrategias, sus ventajas y desventajas, y el impacto generado en el comportamiento de los clientes. Por un lado, se realizan entrevistas a referentes del marketing online turístico en el país, quienes con su experiencia en trabaj...

  5. Negociaciones de paz y agencias de seguridad: perspectivas para el caso colombiano

    OpenAIRE

    Restrepo Villamil, José Libardo

    2014-01-01

    En el presente trabajo de tesis se propone una perspectiva comparada sobre las agendas de negociaciones de paz con las guerrillas centroamericanas y Colombia, en lo relacionado con las transformaciones de las agencias de seguridad, con la intención de tener perspectivas analíticas para el actual proceso de paz que se desarrolla en la Habana-Cuba entre la guerrilla de las FARC-EP y el gobierno colombiano. This tesis job proposes a comparative perspective about the peace negotiation diary be...

  6. Entre crisis, agencia y retorno: vulnerabilidad de las migrantes bolivianas en Italia

    OpenAIRE

    Yépez del Castillo, Isabel; Marzadro, Mirko

    2014-01-01

    En este artículo se abordan las interrelaciones entre crisis, migración y mercado de trabajo y su incidencia en la agencia migratoria femenina, tanto en relación con la decisión inicial de migrar hacia Italia, como con la posibilidad posterior de retornar a Bolivia. A partir de la información recogida en una encuesta de gran envergadura realizada en Cochabamba y del seguimiento de diversas trayectorias migratorias femeninas, damos cuenta de la vulnerabilidad extrema a la que están sometidas l...

  7. Capacidad de agencia de autocuidado y factores de riesgo cardiovascular en adolescentes

    OpenAIRE

    Morales Aguilar, Rosa del Socorro

    2013-01-01

    Este estudio tuvo como objetivo determinar la relación entre la capacidad de agencia de autocuidado y los factores de riesgo cardiovascular en adolescentes de una Institución de Educación Superior en el Distrito de Barranquilla. Metodología: Estudio descriptivo, exploratorio, de corte transversal, con abordaje cuantitativo, basado en la teoría del déficit de autocuidado de Orem. La muestra fue de 133 adolescentes, seleccionados mediante muestreo aleatorio simple. Se aplicó la escala ASA, el c...

  8. Kaelum : emprender y crear una nueva agencia de comunicación

    OpenAIRE

    Gallés Faz, Carlota; Universitat Autònoma de Barcelona. Facultat de Ciències de la Comunicació

    2016-01-01

    Projecte pensat per a posar fonament a una nova agència de comunicació que actuaria en el món de la comunicació digital, els esdeveniments i les solucions TIC. Proyecto pensado para marcar las bases de una nueva agencia de comunicación que actuaria en el ámbito de la comunicación digital, los eventos y las soluciones TIC. Project designed to lay the technical basics for starting a new communications agency who is going to intervene on the digital communication, events and TIC sphere....

  9. The system of nuclear material control of Kazakhstan

    International Nuclear Information System (INIS)

    Yeligbayeva, G.Zh.

    2001-01-01

    Full text: The State system for nuclear material control consists of three integral components. The efficiency of each is to guarantee the non-proliferation regime in Kazakhstan. The components are the following: accounting, export and import control and physical protection of nuclear materials. First, the implementation of the goals of accounting and control bring into force, by the organization of the system for accounting and measurement of nuclear materials to determine present quantity. Organizing the accounting for nuclear material at facilities will ensure the efficiency of accountancy and reporting information. This defines the effectiveness of the state system for the accounting for the Kazakhstan's nuclear materials. Currently, Kazakhstan's nuclear material is fully safeguarded in designated secure locations. Kazakhstan has a nuclear power plant, 4 research reactors and a fuel fabrication plant. The governmental information system for nuclear materials control consist of two level: Governmental level - KAEA collects reports from facilities and prepares the reports for International Atomic Energy Agency, keeping of supporting documents and other necessary information, a data base of export and import, a data base of nuclear material inventory. Facility level - registration and processing information from key measurement points, formation the facility's nuclear materials accounting database. All facilities have computerized systems. Currently, all facilities are safeguarded under IAEA safeguarding standards, through IAEA inspections. Annually, IAEA verifies all nuclear materials at all Kazakhstan nuclear facilities. The government reporting system discloses the existence of all nuclear material and its transfer intended for interaction through the export control system and the nuclear control accounting system. Nuclear material export is regulated by the regulations of the Nuclear Export Control Law. The standard operating procedure is the primary means for

  10. Accounting for and control of nuclear material at the Central Institute of Nuclear Research, Rossendorf

    International Nuclear Information System (INIS)

    Heidel, S.; Rossbander, W.; Helming, M.

    1983-01-01

    A survey is given of the system of accounting for and control of nuclear material at the Central Institute for Nuclear Research, Rossendorf. It includes 3 material balance areas. Control is implemented at both the institute and the MBA levels on the basis of concepts which are coordinated with the national control authority of the IAEA. The system applied enables national and international nuclear material control to be carried out effectively and economically at a minimum of interference with operational procedures. (author)

  11. Nuclear reactor shutdown control rod assembly

    International Nuclear Information System (INIS)

    Bilibin, K.

    1988-01-01

    This patent describes a nuclear reactor having a reactor core and a reactor coolant flowing therethrough, a temperature responsive, self-actuated nuclear reactor shutdown control rod assembly, comprising: an upper drive line terminating at its lower end with a substantially cylindrical wall member having inner and outer surfaces; a lower drive line having a lower end adapted to be attached to a neutron absorber; a ring movable disposed about the outer surface of the wall member of the upper drive line; thermal actuation means adapted to be in heat exchange relationship with coolant in an associated reactor core and in contact with the ring, and balls located within the openings in the upper drive line. When reactor coolant approaches a predetermined design temperature the actuation means moves the ring sufficiently so that the balls move radially out from the recess and into the space formed by the second portion of the ring thereby removing the vertical support for the lower drive line such that the lower drive line moves downwardly and inserts an associated neutron absorber into an associated reactor core resulting in automatic reduction of reactor power

  12. Online control loop tuning in Pickering Nuclear Generating Stations

    International Nuclear Information System (INIS)

    Yu, K.X.; Harrington, S.

    2008-01-01

    Most analog controllers in the Pickering B Nuclear Generating Stations adopted PID control scheme. In replacing the analog controllers with digital controllers, the PID control strategies, including the original tuning parameters were retained. The replacement strategy resulted in minimum effort on control loop tuning. In a few cases, however, it was found during commissioning that control loop tuning was required as a result of poor control loop performance, typically due to slow response and controlled process oscillation. Several factors are accounted for the necessities of control loop re-tuning. Our experience in commissioning the digital controllers showed that online control tuning posted some challenges in nuclear power plant. (author)

  13. Nuclear fuel pin controlled failure device

    International Nuclear Information System (INIS)

    Schlenker, L.D.

    1975-01-01

    Each fuel pin of a fuel assembly for a water-cooled nuclear reactor is provided with means for rupturing the cladding tube at a predetermined location if an abnormal increase in pressure of the gases present occurs due to a loss-of-coolant accident. Preferably all such rupture means are oriented to minimize the hydraulic resistance to the flow of emergency core coolant such as all rupture means pointing in the same direction. Rupture means may be disposed at different elevations in adjacent fuel pins and, further, fuel pins may be provided with two or more rupture means, one of which is in the upper portion of the fuel pin. Rupture means are mechanical as by providing a locally weakened condition of a controlled nature in the cladding. (U.S.)

  14. Determinantes de la eficiencia en el canal de distribución: análisis en agencias de viajes

    OpenAIRE

    Sellers Rubio, Ricardo; Mas Ruiz, Francisco José

    2009-01-01

    El incremento de la competencia entre agencias de viajes y el impacto del comercio electrónico como una alternativa al canal de distribución turístico tradicional han dado lugar a un entorno en el que la gestión eficiente de los recursos productivos resulta fundamental para las agencias de viajes. Así, el objetivo del trabajo consiste en estimar la eficiencia con la que operan los intermediarios del sector minorista español de distribución turístico, y conocer la influencia de algunos de sus ...

  15. Plan de negocio para la creación de la empresa: "Prevent Ltda." Agencia de seguros

    OpenAIRE

    Mondragón Sánchez, Germán Mauricio; Rodríguez Díaz, Luz Adriana

    2011-01-01

    El presente plan de negocio muestra, la investigación realizada acerca de la oportunidad existente en la creación de una agencia de seguros especializada en la suscripción de pólizas de vehículos en la ciudad de Bogotá, y específicamente en estratos socioeconómicos 4, 5 y 6. El presente plan de negocio corresponde a una agencia de seguros cuya actividad económica consiste en intermediación, comercialización y suscripción de pólizas de seguros en ramos generales; inicialmente se incursio...

  16. Análisis del sector de las agencias de viajes en España: una aproximación desde la caracterización del sector entre las agencias de viajes tradicionales y las agencias de viajes online

    OpenAIRE

    Lacalle Muñoz de Cuerva, Luis; Baena Graciá, Verónica; Moreno Melgarejo, Alberto

    2013-01-01

    El sector de las agencias de viajes español está sufriendo en los últimos años una importantísima transformación. El número de agencias se ha visto reducido de manera drástica y la composición de la industria también se ha visto alterada. Por otra parte, cada vez es mayor el número de agencias online que desplazan a aquellas que realizan su labor de intermediación de una manera tradicional. No sólo en número sino también atendiendo a la cuota de mercado. El presente artículo además de present...

  17. History of the nuclear matter safety and control law

    International Nuclear Information System (INIS)

    Dean, G.

    1994-01-01

    In this text we give the history of the law creation on the control and safety of nuclear matter. Initially based on the CEA regulation single owner of nuclear matter, the development of nuclear energy has conducted the French government to edict law in relation with IAEA and Euratom recommendations

  18. Status and prospects of nuclear arms control study

    International Nuclear Information System (INIS)

    Sun Xiangli; Wang Deli

    1995-01-01

    Some main issues and problems involved in nuclear arms control study, such as nuclear policy, NPT regime, verification technologies for a CTBT and disposal of military nuclear materials are introduced, in which both the current state and prospects of these issues are analyzed

  19. Environmental radioactive contamination and its control for nuclear power plants

    International Nuclear Information System (INIS)

    Shi Zhongqi; Qu Jingyuan; Cui Yongli

    1998-01-01

    The environmental radioactive releases and exposure to human being due to operation of nuclear power plants in the world and in China, environmental contamination and consequences caused by severe nuclear power plant accidents in the history, control of the radioactive contamination in China, and some nuclear laws on the radioactive contamination control established by international organizations and USA etc. are described according to literature investigation and research. Some problems and comments in radioactive contamination control for nuclear power plants in China are presented. Therefore, perfecting laws and regulations and enhancing surveillances on the contamination control are recommended

  20. India's nuclear command and control: perspectives from organisation theory

    International Nuclear Information System (INIS)

    Sasikumar, Shanmugasundaram

    2010-01-01

    Command and control of nuclear weapons was the edifice upon which great power nuclear strategy was based. Empirical Cold War research later proved that this edifice was, in fact, only a power keg. Therefore, US non-proliferation-minded analysts propounded logical reasons for their claim that new nuclear nations will be unable to demonstrate prudence in nuclear weapons management. The unique Indian case, pronounced from the organisation theory perspective, proves to the contrary. India's nuclear organisation is not a static entity; its unique strategic culture together with a political standard operating procedure for nuclear weapons management reduces the exaggerated possibility of any catastrophe. (author)

  1. El enfoque de las capacidades, la agencia cognitiva y los recursos morales

    Directory of Open Access Journals (Sweden)

    Agustín Reyes Morela

    2012-02-01

    Full Text Available El enfoque de Sen se presenta como una alternativa en el terreno de la justicia distributiva. Su noción central es la de capacidad de agencia, es decir, la libertad efectiva para alcanzar aquello que se tienen razones para valorar. A su vez, la idea de agencia cognitiva refiere a la capacidad de revisar o reforzar estas razones. Bajo la autocomprensión de las sociedades modernas, la única forma válida de desarrollarla es a través de la deliberación pública. Del intercambio surgen los recursos morales (entre ellos las razones morales que permiten modificar la concepción del bien y fortalecer sentido de justicia de los sujetos.The Sen’s approach is presented as an alternative in the field of distributive justice. Its main concept is the capability of agency, namely the effective freedom to achieve whatever you have reason to value. In turn, the idea of cognitive agency refers to the capability to review and strengthen these reasons. Under the self-understanding of modern societies, the only valid way to develop them is through public deliberation. Through the exchange emerge the moral resources that allow to modify the conception of the good and strengthen the sense of justice of the people.

  2. Macrofouling control in nuclear power plants

    International Nuclear Information System (INIS)

    Ekis, E.W. Jr.; Keoplin-Gall, S.M.; McCarthy, R.E.

    1991-01-01

    Macrofouling of cooling-water systems is one of the more significant and costly problems encountered in the nuclear power industry. Both marine and freshwater macroinvertebrates can be responsible for losses in plant availability because of plugged intakes and heat transfer equipment. There is a greater diversity of macrofouling organisms in marine waters than in fresh waters. Marine macrofouling organisms include barnacles, mollusks, bryozoans, and hydroids. Barnacles are crustaceans with feathery appendages, which allow them to attach to a variety of surfaces. They are a major cause of severe macrofouling because they can remain attached even after death. The major freshwater macrofouling organisms include the Asiatic Clam (Corbicula fluminea) and the newest freshwater macrofouler, the Zebra Mussel (Dreissena polymorpha). The introduction of the Zebra Mussel into the Great Lakes has created economic and ecological problems that will not easily be solved. The threat of intercontinental dispersal of the Zebra Mussel in America is serious. Research programs have been initiated around the country to develop control methods for this macrofouling problem. The various control methodologies can be classified in the following categories: biological, chemical, physical, and mechanical. Laboratory experiments were performed to evaluate the efficacy of Actibrom against mature Zebra Mussels

  3. Buli. Mater. Sci., Vol. 10, No. 4, July 1988, pp. 367-372. (C

    Indian Academy of Sciences (India)

    Mater. Sci., Vol. 10, No. 4, July 1988, pp. 367-372. (C) Printed in India. Studies on iron-chromium redox storage system. SH PAWAR, R D MADHALE, P S PATIL and CD LOKHANDE. Department of Physics, Shivaji University, Kolhapur 416 004, India. Abstract. The performance of the redox storage battery based on the Fe-Cr ...

  4. Interaction of ionizing radiation with mater; Oddzialywanie promieniowania jonizujacego z materia

    Energy Technology Data Exchange (ETDEWEB)

    Pogocki, D [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

    1997-10-01

    The early radiation effects (e.g. excitation, ionization) have been described and compared for different kind of radiation interacting with mater. The mechanism of energy deposition in connection with radiation dose and their spatial distribution has been shown.The commonly used definitions and units in radiation dosimetry have been also reviewed. 4 refs, 4 figs.

  5. Role of nuclear material accounting and control on nuclear security. Countermeasure against insider threat

    International Nuclear Information System (INIS)

    Osabe, Takeshi

    2014-01-01

    Possibility on unauthorized removal (theft) of nuclear material by a facility insider is a recognized as a serious threat. An insider could take advantage or knowledge of control system and access to nuclear material to intercept facility's system designed to protect theft of nuclear material by an insider. This paper will address how the facility level Nuclear Material Accounting and Control (NMAC) System should be designed and implemented to enhance deterring and detect theft of nuclear material by a facility insider. (author)

  6. Controlling a nuclear reactor with dropped control rods

    International Nuclear Information System (INIS)

    Mc Atee, K.R.; Alsop, B.H.

    1987-01-01

    A control system is described for a nuclear power plant including a reactor with a core having an upper portion and a lower portion and control rods which are inserted into and withdrawn from the core of the reactor vertically to control reactivity in the core. The system comprises: means to measure neutron flux separately in the upper portion and the lower portion of the reactor and to generate from such measurements a signal representative of axial distribution of power between the upper and lower portions of the reactor core; means to detect a dropped control rod in the reactor and to generate a dropped rod signal in response thereto; means to generate an axial power distribution limit signal representative of a critical axial power distribution for a dropped rod condition; means to compare the axial power distribution signal to the axial power distribution limit signal and to generate an axial power distribution out of limits signal when the axial power distribution signal exceeds the axial power distribution limit signal; and means responsive only to the presence of both the dropped rod signal and the axial power distribution out of limits signal to generate a signal for shutting the reactor down

  7. Nuclear knowledge portal to support licensing and control nuclear activities in the Brazilian Nuclear Energy Commission

    International Nuclear Information System (INIS)

    Gomes, Elizabeth; Braga, Fabiane

    2004-01-01

    importance of keeping the intellectual capital in the organizations that is to work with the knowledge from the collaborators. In Brazil still have many authors that discusses this concept and we adopt for this paper the definition form Cavalcanti where is the concept 'intellectual capital' refers either to the capacity, ability or experience, as well as to the formal education that the collaborators members have and add to the Organization. The 'intellectual capital' is an intangible asset, which belongs to the individual himself, thus it might be utilized by the organizations in order to generate value. The development and preservation of this intellectual capital is made through the implementation of forums of discussion, workshops or knowledge portals where the organization's collaborators share their experiences. Nevertheless, to assimilate and to develop the 'intellectual capital' does not add value to the organization: It is necessary to keep it. And one way to do so is to create desirable and encouraging work environments, to promote a sharing management and to offer programs of profits sharing. The objective of this paper is to describe how Brazilian Nuclear Energy Commission - CNEN has been developing a nuclear knowledge portal, focused in the Radiation and Safety Nuclear area. The Brazilian Nuclear Energy Commission (CNEN) is a federal autarchy created in October 10 of 1956, as a superior agency of planning, guiding, supervision and inspection in nuclear area being also the body entitled to establish standards and regulations on radiological protection, to issue licenses (permissions) and to survey and control the nuclear activities in Brazil. CNEN also develops researches related to the use of nuclear techniques in benefit of the society. The Radiation and Safety Nuclear directorate of CNEN acts, mainly, in the licensing of nuclear and radioactive installations. The people who work at this area recognize the importance of management and sharing the accumulated

  8. Management review of nuclear material control and accounting systems

    International Nuclear Information System (INIS)

    1975-06-01

    Section 70.58, ''Fundamental Nuclear Material Controls,'' of 10 CFR Part 70, ''Special Nuclear Materials,'' requires, in paragraph 70.58(c), that certain licensees authorized to possess more than one effective kilogram of special nuclear material establish a management system to provide for the development, revision, implementation, and enforcement of nuclear material control and accounting procedures. Such a system must provide for a review of the nuclear material control system at least every 12 months. This guide describes the purpose and scope, personnel qualifications, depth of detail, and procedures that are acceptable to the NRC staff for the management review of nuclear material control systems required under paragraph 70.58(c) of 10 CFR Part 70. (U.S.)

  9. Bus-oriented digital control techniques in nuclear power plants

    International Nuclear Information System (INIS)

    Salm, M.

    1987-01-01

    The author states the conservative principles which govern the authorization procedures for nuclear reactor control systems. Using the example of a feedwater supply regulator, employing a digital, bus-oriented control system, he describes how the stigma attached to the word nuclear can be alleviated. (G.T.H.)

  10. Material control and accountability in nuclear fuel cycle

    International Nuclear Information System (INIS)

    Rumyantsev, A.N.

    2006-01-01

    It is proposed to unify the complexes, used in the systems for control and accountability of nuclear materials, and to use the successful experience of developing these complexes. It is shown that the problem of control, accountability and physical protection may by achieved by using the developed complex Probabilistic expert-advising system, permitting to analyse the safety in nuclear fuel cycles [ru

  11. Closed loop control of the sawtooth instability in nuclear fusion

    NARCIS (Netherlands)

    Witvoet, G.; Steinbuch, M.; Westerhof, E.; Doelman, N.J.; Baar, de M.R.

    2010-01-01

    In nuclear fusion the sawtooth instability is an important plasma phenomenon, having both positive and negative effects on the tokamak plasma. Control of its period is essential in future nuclear fusion reactors. This paper presents a control oriented model of the sawtooth instability, with current

  12. Dura mater mitral and tricuspid bioprostheses: 30 years of follow-up Bioprótese de dura mater mitral e tricúspide: 30 anos de acompanhamento

    Directory of Open Access Journals (Sweden)

    Luiz Boro Puig

    2003-01-01

    Full Text Available PURPOSE: The dura mater bioprosthesis was developed in the Department of Cardiopneumology of the Hospital das Clínicas of the University of São Paulo Medical School in 1971. Here, we present the clinical results of the dura mater bioprosthesis over 30 years of follow-up. METHODS: We studied 70 consecutive patients who underwent mitral or tricuspid valve replacement with a dura mater bioprosthesis between January 1971 and August 1972. RESULTS: The early mortality was 10% (7 patients. The follow-up was 87% complete (9 patients were lost to follow-up. Two patients were alive and asymptomatic 30 years after valve replacement; 33 patients underwent reoperations due to valve dysfunction, and 19 died during the follow-up period. At 30 years, the actuarial survival was 49.2 ± 8.6%; freedom from rupture, 27.0 ± 10.2%; freedom from calcification, 78.8 ± 8.6%; and freedom from reoperation, 18.8 ± 7.5%. CONCLUSIONS: The dura mater bioprosthesis played an important role in the treatment of patients with mitral and tricuspid valve disease. The low rate of thromboembolism and the long period of follow-up without evidence of valve dysfunction, which occurred for several of our patients, are important characteristics of these bioprosthesis.A bioprótese de dura-mater foi desenvolvida no Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo em 1971. Este trabalho apresenta os resultados clínicos com 30 anos de seguimento. MÉTODOS: Foram estudados 70 pacientes consecutivos com bioprótese mitral ou tricúspide, operados de janeiro de 1971 a agosto de 1972. RESULTADOS: A mortalidade imediata foi 10% (7 pacientes. Dois pacientes evoluem bem com a bioprótese de dura-máter, 9 não tem seguimento atualizado, 33 apresentaram disfunção da bioprotese e foram reoperados e 19 faleceram durante a evolução tardia. A curva atuarial de sobrevida foi de 49,2 ± 8,6%, livre de rotura, 27,0 ± 10,2%, livre de calcificação, 78,8 ± 8,6% e

  13. Regulatory control of nuclear safety in Finland. Annual report 2008

    International Nuclear Information System (INIS)

    Kainulainen, E.

    2009-06-01

    This report covers the regulatory control of nuclear safety in 2008, including the design, construction and operation of nuclear facilities, as well as nuclear waste management and nuclear materials. The control of nuclear facilities and nuclear waste management, as well as nuclear non-proliferation, concern two STUK departments: Nuclear Reactor Regulation and Nuclear Waste and Material Regulation. It constitutes the report on regulatory control in the field of nuclear energy, which the Radiation and Nuclear Safety Authority (STUK) is required to submit to the Ministry of Employment and the Economy pursuant to section 121 of the Finnish Nuclear Energy Decree. The first parts of the report explain the basics of the nuclear safety regulation included as part of STUK's responsibilities, as well as the objectives of the operations, and briefly introduce the objects of regulation. The chapter concerning the development and implementation of legislation and regulations describes changes in nuclear legislation, as well as the progress of STUK's YVL Guide revision. The chapter also includes a summary of the application of the updated YVL Guides to nuclear facilities. The section concerning the regulation of nuclear facilities contains a complete safety assessment of the nuclear facilities currently in operation or under construction. For the nuclear facilities in operation, the section describes plant operation, events during operation, annual maintenance, development of the plants and their safety, and observations made during monitoring. Data and observations gained during regulatory activities are reviewed with a focus on ensuring the safety functions of nuclear facilities and the integrity of structures and components. The report also includes a description of the oversight of the operations and quality management of organisations, oversight of operational experience feedback activities, and the results of these oversight activities. The radiation safety of nuclear

  14. GEOCHEMICAL CONTROLS ON NUCLEAR MAGNETIC RESONANCE MEASUREMENTS

    International Nuclear Information System (INIS)

    Knight, Rosemary

    2008-01-01

    Proton nuclear magnetic resonance (NMR) is used in the Earth Sciences as a means of obtaining information about the molecular-scale environment of fluids in porous geological materials. Laboratory experiments were conducted to advance our fundamental understanding of the link between the NMR response and the geochemical properties of geological materials. In the first part of this research project, we studied the impact of both the surface-area-to-volume ratio (S/V) of the pore space and the surface relaxivity on the NMR response of fluids in sand-clay mixtures. This study highlighted the way in which these two parameters control our ability to use NMR measurements to detect and quantify fluid saturation in multiphase saturated systems. The second part of the project was designed to explore the way in which the mineralogic form of iron, as opposed to simply the concentration of iron, affects the surface relaxation rate and, more generally, the NMR response of porous materials. We found that the magnitude of the surface relaxation rate was different for the various iron-oxide minerals because of changes in both the surface-area-to-volume ratio of the pore space, and the surface relaxivity. Of particular significance from this study was the finding of an anomalously large surface relaxivity of magnetite compared to that of the other iron minerals. Differences in the NMR response of iron minerals were seen in column experiments during the reaction of ferrihydrite-coated quartz sand with aqueous Fe(II) solutions to form goethite, lepidocrocite and magnetite; indicating the potential use of NMR as a means of monitoring geochemical reactions. The final part of the research project investigated the impact of heterogeneity, at the pore-scale, on the NMR response. This work highlighted the way in which the geochemistry, by controlling the surface relaxivity, has a significant impact on the link between NMR data and the microgeometry of the pore space.

  15. Integrated control system for nuclear explosives

    Energy Technology Data Exchange (ETDEWEB)

    Ragsdale, William F [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

    1970-05-15

    The Integrated Control System (ICS) has been developed to facilitate Plowshare nuclear detonations by following a unified system approach. This system consolidates the techniques for firing, safety program, scientific program, and communications. Maximum emphasis is placed upon control and data transmission by radio rather than hardwire or coaxial cable. The ICS consists of a Command Point (CP) Trailer, a radio repeater station, a field station (the ICE Box), and several chassis located in the explosive canister. Commands originate in the CP and are transmitted via microwave radio to the ICE Box; monitors are returned to the CP from the canister, the ICE Box, and sensors near ground zero. The system allows complete checkout and operation before shipment to the field. The explosive canister may be dry-run at the assembly area (at NTS) before shipment to the field. The basic detonation functions for every event are: 1. Arming and firing commands in the explosive canister and at surface ground zero. 2. Environmental monitors and suitable arming monitors in the explosive canister. 3. Safety monitors at the zero site for weather, RAMS (Remote Area Monitoring System), and cavity collapse. Secondary functions that may be required for a specific project are: 4. Scientific program of phenomenology measurements. 5. Explosive performance measurements. 6. Ground zero television. 7. Auxiliary communications such as local telephones, VHF radio. By combining functions that have previously been performed by separate organizations and systems, the ICS attempts a minimum cost detonation service. Economy of operation results because: 1. Operating personnel work on more than one sub-system. 2. Interfaces and interface complexity are minimized. 3. A reduced dependence upon signal cables results from a microwave-based system. 4. Pre-fabrication allows test operation before shipment to the field and minimizes setup time in the field. The ICS is in use on the Sturtevant event and is

  16. Occupational dose control in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Viktorsson, C.; Lochard, J.; Benedittini, M.; Baum, J.; Khan, T.A.

    1990-01-01

    Reduction in occupational exposure at nuclear power plants is desirable not only in the interest of the health and safety of plant personnel, but also because it enhances the safety and reliability of the plants. This report summarises the current trends of doses to workers at nuclear power plants and the achievements and developments regarding methods for their reduction

  17. Tecnologías de la información y comunicación y competitividad administrativa de agencias de viajes minoristas en Mérida, Yucatán

    OpenAIRE

    Manuel Caro Encalada; Raúl Vela Sosa; Carlos Leyva Morales

    2010-01-01

    Se analiza el rol que juega en las agencias de viaje minoristas de la ciudad de Mérida, Yucatán, el e-business, sus elementos e impacto, enfocado a la competitividad de venta de los productos turísticos que realizan estas agencias. Se encontró que en México las agencias virtuales siguen necesitando de un vínculo real con sus clientes y esto solo lo logran a través de las agencias de viajes tradicionales. Que en el caso de las agencias de viaje minoristas de Mérida, el e-bussines esta cumplien...

  18. Computer simulation system of neural PID control on nuclear reactor

    International Nuclear Information System (INIS)

    Chen Yuzhong; Yang Kaijun; Shen Yongping

    2001-01-01

    Neural network proportional integral differential (PID) controller on nuclear reactor is designed, and the control process is simulated by computer. The simulation result show that neutral network PID controller can automatically adjust its parameter to ideal state, and good control result can be gotten in reactor control process

  19. Regulatory control of nuclear facility valves and their actuators

    International Nuclear Information System (INIS)

    1993-01-01

    The methods and procedures by which the Finnish Centre for Radiation and Nuclear Safety (STUK) regulates valves and their actuators in nuclear power plants and in other nuclear facilities are specified in the guide. The scope of regulation depends on the Safety Class of the valve and the actuator in question. The Safety Classification principles for the systems, structures and components of the nuclear power plants are described in the guide YVL 2.1 and the regulatory control of the nuclear facility safety valves is described in the guide YVL 5.4

  20. Methodologies for nuclear material accounting and control: challenges and expectations

    International Nuclear Information System (INIS)

    Ramakumar, K.L.

    2007-01-01

    Nuclear Material Accounting and Control (NUMAC) represents one of the most important and indispensable responsibilities of any nuclear installation. The emphasis is to ensure that the nuclear material being handled in the nuclear installation is properly accounted for with the expected accuracy and confidence levels. A number of analytical methods based on both destructive and non-destructive assay techniques are available at the disposal of the nuclear analytical scientists for this purpose and they have been enumerated extensively in literature. Instead of recounting the analytical methodologies available, an attempt has been made in this paper to highlight some of the challenges. (author)

  1. 10 CFR 74.41 - Nuclear material control and accounting for special nuclear material of moderate strategic...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Nuclear material control and accounting for special nuclear material of moderate strategic significance. 74.41 Section 74.41 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) MATERIAL CONTROL AND ACCOUNTING OF SPECIAL NUCLEAR MATERIAL Special Nuclear Material...

  2. Computerized control and management at the Temelin nuclear power plant

    International Nuclear Information System (INIS)

    Mitosinka, J.; Korec, J.

    1992-01-01

    The proposed automation of the nuclear power plant control system includes a division of the control system into three hierarchic levels, supplemented with an additional level. These comprise the automated system of control of technological processes, the all-plant control of the power-generating process, the control of backup activities and of technical and economic activities, and top managerial control. The efficiency of the nuclear power plant operation, i.e. attainment of the maximum electricity output with minimum costs while securing the required safety, is the principal criterion in the design of the data model. Listed are tasks that would lend themselves to automation within the automated system of nuclear power plant control, and the basic scheme of their automation as follows from an analysis performed at the Temelin nuclear power plant. (Z.S). 2 figs., 2 refs

  3. The nuclear materials control system: Safeguards - circa 1957

    International Nuclear Information System (INIS)

    Thomas, C.C. Jr.

    1992-01-01

    In the late 1950s, the Westinghouse Electric Corporation undertook a nuclear materials control study for the Division of International Affairs of the US Atomic Energy Commission (AEC). The objective of the study was to develop a Nuclear Materials Control System (NMCS) that could be used under the US bilateral agreements or by the International Atomic Energy Agency. Phase I was a system study to determine the requirements for an NMCS for an assumed nuclear fuel complex. This paper summarizes aspects of Phase I studies addressing facility types, measurement points, and instrumentation needs and Phase II studies covering chemistry/chemical engineering, nuclear, special devices, and security devices and techniques. 1 fig

  4. Nuclear waste : Is everthing under control ?

    OpenAIRE

    Giuliani, Gregory; De Bono, Andréa; Kluser, Stéphane; Peduzzi, Pascal

    2007-01-01

    50 years after the opening of the world's first civil nuclear power station, very little radioac- tive waste produced has been permanently disposed of. Moreover, the average age of today's reactors is approximately 22 years, meaning most of them will be decommissioned over the next decades. All of these wastes will have to be disposed of even if no more nuclear reactors are built. But is it wise to take further advantage of the “nuclear path”, without proven and widely-utilized solutions to t...

  5. Nuclear security recommendations on nuclear and other radioactive material out of regulatory control: Recommendations

    International Nuclear Information System (INIS)

    2011-01-01

    The purpose of this publication is to provide guidance to States in strengthening their nuclear security regimes, and thereby contributing to an effective global nuclear security framework, by providing: - Recommendations to States and their competent authorities on the establishment or improvement of the capabilities of their nuclear security regimes, for carrying out effective strategies to deter, detect and respond to a criminal act, or an unauthorized act, with nuclear security implications, involving nuclear or other radioactive material that is out of regulatory control; - Recommendations to States in support of international cooperation aimed at ensuring that any nuclear or other radioactive material that is out of regulatory control, whether originating from within the State or from outside that State, is placed under regulatory control and the alleged offenders are, as appropriate, prosecuted or extradited

  6. Regulatory control of nuclear safety in Finland. Annual report 1997

    International Nuclear Information System (INIS)

    Tossavainen, K.

    1998-08-01

    The report describes regulatory control of the use of nuclear energy by the Radiation and Nuclear Safety Authority (STUK) in Finland in 1997. Nuclear regulatory control ascertained that the operation of Finnish NPPs was in compliance with the conditions set out in operating licences and current regulations. In addition to NPP normal operation, STUK oversaw projects at the plant units relating to power uprating and safety improvements. STUK prepared statements for the Ministry of Trade and Industry about the applications for renewing the operating licenses of Loviisa and Olkiluoto NPPs. The most important items of supervision in nuclear waste management were studies relating to the final disposal of spent fuel from NPPs and the review of the licence application for a repository for low- and intermediate-level reactor waste from Loviisa NPP. Preparation of general safety regulations for the final disposal of spent nuclear fuel, to be published in the form of a Council of State Decision, was started. By safeguards control, the use of nuclear materials was verified to be in compliance with current regulations and that the whereabouts of every batch of nuclear material were always known. Nuclear material safeguards were stepped up to prevent illicit trafficking of nuclear materials and other radioactive materials. In co-operation with the Ministry for Foreign Affairs and the Institute of Seismology (University of Helsinki), preparations were undertaken to implement the Comprehensive Nuclear Test Ban Treaty (CTBT). For enforcement of the Treaty and as part of the international regulatory approach, STUK is currently developing laboratory analyses relating to airborne radioactivity measurements. The focus of co-operation funded by external sources was as follows: improvement of the safety of Kola and Leningrad NPPs, improvement of nuclear waste management in North-West Russia, development of the organizations of nuclear safety authorities in Eastern Europe and development

  7. El contrato de agencia comercial. Análisis dentro del contexto del derecho romano

    Directory of Open Access Journals (Sweden)

    María Elisa Camacho López

    2009-06-01

    Full Text Available Sumario: Premisa. Principios derivados del sistema jurídico romano-germánico aplicables al contrato de agencia comercial. i. Algunas figuras de la actividad mercantil en el derecho romano. ii. Cláusulas de no competencia. A. Posibles fuentes de la obligación de no competencia en el derecho romano. 1. Obsequium. 2. Operae iuratae. 3. Operae stipulatae. 4. Stipulatio. 5. Contratos innominados. 6. Lex mancipii. B. Licitud o ilicitud de la obligación de no competencia en el derecho romano. C. Condena por el incumplimiento de la obligación de no competir. iii. Consecuencias de la terminación del contrato. A. Revocación del mandato por parte del mandante. B. Renuncia del mandato por parte del mandatario. iv. Conclusiones

  8. El espionaje y agencias de seguridad: los Estados Unidos y la Federación Rusa

    Directory of Open Access Journals (Sweden)

    Daniela Alejandra Alba Useche

    2014-01-01

    Full Text Available La evolución del espionaje y la tecnología desde la Guerra Fría entre los Estados Unidos y la Federación Rusa se ha desarrollado a través de las Agencias de Seguridad, pero desde los ataques del 11-S, hubo un giro en los métodos de atacar el terrorismo; este tema se convirtió en la prioridad para Estados Unidos y para el resto del mundo. Por esta razón, se están desarrollando vertiginosamente programas de vigilancia, recopilación y análisis de información, sirviéndose del ciberespacio y del ciberespionaje, donde ahora todos somos observados y la privacidad ha sido reemplazada por la vigilancia ‘en aras’ de la seguridad.

  9. Insurer risk control and nuclear liability

    Energy Technology Data Exchange (ETDEWEB)

    DeMerchant, C. [Nuclear Insurance Association of Canada, Toronto, ON (Canada)

    2015-07-01

    We specialize in high quality insurance risk management, underwriting and inspections for Canadian nuclear exposures. We provide true risk transfer, secure insurance capacity and collaborate with the world's nuclear experts to create innovative domestic solutions for our clients and members. The benefit of our experience works for all stake holders: insured clients, members, multi-level government agencies and all Canadians. NIAC has a 55-year history of partnering with insurers around the globe to create reliable risk management for the nuclear industry. We offer Canadian risk solutions, thought leadership and expertise that provides security and confidence to our customers and members. NIAC leads in the areas of nuclear insurance law, good governance and claims administration to create a true Centre of Excellence.

  10. Insurer risk control and nuclear liability

    International Nuclear Information System (INIS)

    DeMerchant, C.

    2015-01-01

    We specialize in high quality insurance risk management, underwriting and inspections for Canadian nuclear exposures. We provide true risk transfer, secure insurance capacity and collaborate with the world's nuclear experts to create innovative domestic solutions for our clients and members. The benefit of our experience works for all stake holders: insured clients, members, multi-level government agencies and all Canadians. NIAC has a 55-year history of partnering with insurers around the globe to create reliable risk management for the nuclear industry. We offer Canadian risk solutions, thought leadership and expertise that provides security and confidence to our customers and members. NIAC leads in the areas of nuclear insurance law, good governance and claims administration to create a true Centre of Excellence.

  11. Some technical aspects of the nuclear material accounting and control at nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Miller, O.A.; Babaev, N.S.; Gryazev, V.M.; Gadzhiev, G.I.; Gabeskiriya, V.Ya.

    1977-01-01

    The possibilities of nuclear material accounting and control are discussed at nuclear facilities of fuel cycle (WWER-type reactor, fuel fabrication plant, reprocessing plant and uranium enrichment facility) and zero energy fast reactor facility. It is shown that for nuclear material control the main method is the accounting with the application isotopic correlations at the reprocessing plant and enrichment facility. Possibilities and limitations of the application of destructive and non-destructive methods are discussed for nuclear material determinations at fuel facilities and their role in the accounting and safeguards systems as well as possibilities of the application of neutron method at a zero energy fast reactor facility [ru

  12. Nuclear Power Plant Control and Instrumentation in Pakistan

    International Nuclear Information System (INIS)

    Iqleem, J.; Hashmi, J.A.; Siddiqui, Z.H.

    1990-01-01

    Nuclear reactors generate 15% of the world's supply electric power. The substantial growth in world energy demand is inevitably continuing throughout the next century. Nuclear power which has already paid more than enough for itself and its development, will provide increasing share of electricity production both in the developed and developing countries. For Pakistan with limited natural resources such as oil, gas, and fully tapped hydel power, nuclear power is the only viable option. However, things are not simple for developing countries which embark on nuclear power program. A technical infrastructure should be established as it has been shown by the experience of Control and Instrumentation of the Karachi Nuclear Power Plant. The national report describes the program of Pakistan Atomic Energy Commission in (NPP) Computers, Control and Instrumentation for design, construction, operation, and maintenance of nuclear power plants. (author)

  13. The matter of probability controlling melting of nuclear ship reactor

    International Nuclear Information System (INIS)

    Pihowicz, W.; Sobczyk, S.

    2008-01-01

    In the first part of this work beside description of split power, power of radioactivity disintegration and afterpower and its ability to extinguish, the genera condition of melting nuclear reactor core and its detailed versions were described. This paper also include the description of consequences melting nuclear reactor core both in case of stationary and mobile (ship) reactor and underline substantial differences. Next, fulfilled with succeed, control under melting of stationary nuclear reactor core was characterized.The middle part describe author's idea of controlling melting of nuclear ship reactor core. It is based on: - the suggestion of prevention pressure's untightness in safety tank of nuclear ship reactor by '' corium '' - and the suggestion of preventing walls of this tank from melting by '' corium ''. In the end the technological and construction barriers of the prevention from melting nuclear ship reactor and draw conclusions was presented. (author)

  14. Optimal estimation and control in nuclear power plants

    International Nuclear Information System (INIS)

    Purviance, J.E.; Tylee, J.L.

    1982-08-01

    Optimal estimation and control theories offer the potential for more precise control and diagnosis of nuclear power plants. The important element of these theories is that a mathematical plant model is used in conjunction with the actual plant data to optimize some performance criteria. These criteria involve important plant variables and incorporate a sense of the desired plant performance. Several applications of optimal estimation and control to nuclear systems are discussed

  15. Nuclear reactor power control system based on flexibility model

    International Nuclear Information System (INIS)

    Li Gang; Zhao Fuyu; Li Chong; Tai Yun

    2011-01-01

    Design the nuclear reactor power control system in this paper to cater to a nonlinear nuclear reactor. First, calculate linear power models at five power levels of the reactor as five local models and design controllers of the local models as local controllers. Every local controller consists of an optimal controller contrived by the toolbox of Optimal Controller Designer (OCD) and a proportion-integration-differentiation (PID) controller devised via Genetic Algorithm (GA) to set parameters of the PID controller. According to the local models and controllers, apply the principle of flexibility model developed in the paper to obtain the flexibility model and the flexibility controller at every power level. Second, the flexibility model and the flexibility controller at a level structure the power control system of this level. The set of the whole power control systems corresponding to global power levels is to approximately carry out the power control of the reactor. Finally, the nuclear reactor power control system is simulated. The simulation result shows that the idea of flexibility model is feasible and the nuclear reactor power control system is effective. (author)

  16. An accountancy system for nuclear materials control in research centres

    International Nuclear Information System (INIS)

    Buttler, R.; Bueker, H.; Vallee, J.

    1979-01-01

    The Nuclear Accountancy and Control System (NACS) was developed at KFA Juelich in accordance with the requirements of the Non-Proliferation Treaty. The main features are (1) recording of nuclear material in inventory items. These are combined to form batches wherever suitable; (2) extrapolation of accounting data as a replacement for detailed measurement of inventory items data. Recording and control of nuclear material are carried out on two levels with access to a common data bank. The lower level deals with nuclear materials handling plus internal management while on the upper level there is a central control point which is responsible for nuclear safeguarding within the entire research centre. By keeping the organizational and technical infrastructure it was possible to develop a system which is both economical and operator-oriented. In this system the emphasis of nuclear safeguarding is placed on the acquisition of the nuclear material inventory. As much consideration has been given to the interests of the various operational levels and organizational units as to internal and national regulations. Since it is part of the safeguarding and control system, access to the NACS must be restricted to a limited number of users only. Furthermore, it must include facilities for manual control in the form of records. Authorization for access must correspond with the various tasks of different user groups. All necessary data are acquired decentrally in the organizational units and entered via a terminal. It is available to the user groups on both levels through a central data bank. To meet all requirements, the NACS has been designed as an integrated, computer-assisted information system for the automated processing of extensive and multi-level nuclear materials data. As part of the preventive measures entailed with nuclear safeguarding, the accountancy system enables the operator of a nuclear plant to furnish proof of non-diversion of nuclear material. (author)

  17. Information about the control of nuclear safety in France

    International Nuclear Information System (INIS)

    Gerster, D.

    1994-01-01

    The permanent objective of the French Nuclear Safety Authority is the public information about technical controls performed in French nuclear installations. Three publications from the DSIN (Direction of Nuclear Installations Safety) are devoted to this effort: the MAGNUC Minitel magazine, the annual activity report and the CONTROLE magazine. Details about the content of these publications are given. A large part of the information about control of nuclear safety concerns the incidents and accidents and their importance level. A seriousness scale was created in France at the beginning of 1988 and replaced in April 1994 by the very similar International Nuclear Event Scale (INES). Explanation of this scale is given and illustrated with examples of real events and accidents. However, international comparison between incidents and accidents remains delicate because the detailed content of safety reports can change significantly from one country to another. (J.S.). 1 fig

  18. Nuclear Forensic Science: Analysis of Nuclear Material Out of Regulatory Control

    Science.gov (United States)

    Kristo, Michael J.; Gaffney, Amy M.; Marks, Naomi; Knight, Kim; Cassata, William S.; Hutcheon, Ian D.

    2016-06-01

    Nuclear forensic science seeks to identify the origin of nuclear materials found outside regulatory control. It is increasingly recognized as an integral part of a robust nuclear security program. This review highlights areas of active, evolving research in nuclear forensics, with a focus on analytical techniques commonly employed in Earth and planetary sciences. Applications of nuclear forensics to uranium ore concentrates (UOCs) are discussed first. UOCs have become an attractive target for nuclear forensic researchers because of the richness in impurities compared to materials produced later in the fuel cycle. The development of chronometric methods for age dating nuclear materials is then discussed, with an emphasis on improvements in accuracy that have been gained from measurements of multiple radioisotopic systems. Finally, papers that report on casework are reviewed, to provide a window into current scientific practice.

  19. Claudia Quinta (Pro Caelio 34 and an altar to Magna Mater

    Directory of Open Access Journals (Sweden)

    Eleanor Winsor Leach

    2010-11-01

    Full Text Available Among the items of sculpture from the Capitoline collection now housed in the Museum of the Power Station Montemartini is a marble relief altar of the Claudian Period (E. Simon's dating dedicated to the mater deorum and the navis salvia and depicting the arrival of the goddess Cybele at Rome by ship. The dedicator is one Claudia Syntyche and the sculpture alludes to the legends attached to a much honored woman of the Claudian family whom Cicero, in his oration pro Caelio brought on stage in a cameo appearance to bolster his case against the controversial contemporary woman Clodia Metelli as one of the accusers of his client M. Caelius Rufus. This paper will consider questions raised by the iconography of the altar with reference to the development of Claudia's legend in Roman mythology and subsequently ask who was this Claudia the dedicator and why did she choose Magna Mater for her vow?

  20. Nuclear Security Recommendations on Nuclear and other Radioactive Material out of Regulatory Control: Recommendations (Spanish Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This publication presents recommendations for the nuclear security of nuclear and other radioactive material that is out of regulatory control. It is based on national experiences and practices and guidance publications in the field of security as well as the nuclear security related international instruments. The recommendations include guidance for States with regard to the nuclear security of nuclear and other radioactive material that has been reported as being out of regulatory control as well as for material that is lost, missing or stolen but has not been reported as such, or has been otherwise discovered. In addition, these recommendations adhere to the detection and assessment of alarms and alerts and to a graded response to criminal or unauthorized acts with nuclear security implications.

  1. Nuclear Security Recommendations on Nuclear and Other Radioactive Material out of Regulatory Control: Recommendations (Arabic Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This publication presents recommendations for the nuclear security of nuclear and other radioactive material that is out of regulatory control. It is based on national experiences and practices and guidance publications in the ? field of security as well as the nuclear security related international instruments. The recommendations include guidance for States with regard to the nuclear security of nuclear and other radioactive material that has been reported as being out of regulatory control as well as for material that is lost, missing or stolen but has not been reported as such, or has been otherwise discovered. In addition, these recommendations adhere to the detection and assessment of alarms and alerts and to a graded response to criminal or unauthorized acts with nuclear security implications.

  2. Nuclear Security Recommendations on Nuclear and Other Radioactive Material out of Regulatory Control: Recommendations

    International Nuclear Information System (INIS)

    2011-01-01

    This publication presents recommendations for the nuclear security of nuclear and other radioactive material that is out of regulatory control. It is based on national experiences and practices and guidance publications in the field of security as well as the nuclear security related international instruments. The recommendations include guidance for States with regard to the nuclear security of nuclear and other radioactive material that has been reported as being out of regulatory control as well as for material that is lost, missing or stolen but has not been reported as such, or has been otherwise discovered. In addition, these recommendations adhere to the detection and assessment of alarms and alerts and to a graded response to criminal or unauthorized acts with nuclear security implications

  3. Nuclear Security Recommendations on Nuclear and Other Radioactive Material out of Regulatory Control: Recommendations (Russian Edition)

    International Nuclear Information System (INIS)

    2011-01-01

    This publication presents recommendations for the nuclear security of nuclear and other radioactive material that is out of regulatory control. It is based on national experiences and practices and guidance publications in the field of security as well as the nuclear security related international instruments. The recommendations include guidance for States with regard to the nuclear security of nuclear and other radioactive material that has been reported as being out of regulatory control as well as for material that is lost, missing or stolen but has not been reported as such, or has been otherwise discovered. In addition, these recommendations adhere to the detection and assessment of alarms and alerts and to a graded response to criminal or unauthorized acts with nuclear security implications.

  4. U.S. national nuclear material control and accounting system

    International Nuclear Information System (INIS)

    Taylor, S; Terentiev, V G

    1998-01-01

    Issues related to nuclear material control and accounting and illegal dealing in these materials were discussed at the April 19--20, 1996 Moscow summit meeting (G7 + Russia). The declaration from this meeting reaffirmed that governments are responsible for the safety of all nuclear materials in their possession and for the effectiveness of the national control and accounting system for these materials. The Russian delegation at this meeting stated that ''the creation of a nuclear materials accounting, control, and physical protection system has become a government priority''. Therefore, in order to create a government nuclear material control and accounting system for the Russian Federation, it is critical to study the structure, operating principles, and regulations supporting the control and accounting of nuclear materials in the national systems of nuclear powers. In particular, Russian specialists have a definite interest in learning about the National Nuclear Material Control and Accounting System of the US, which has been operating successfully as an automated system since 1968

  5. Control and data processing systems in UK nuclear power plant and nuclear facilities

    International Nuclear Information System (INIS)

    Baldwin, J.A.; Wall, D.N.

    1997-01-01

    This note identifies some of the data processing and control systems in UK nuclear power plant, with emphasis on direct digital control systems and sequence control. A brief indication is also given of some of the associated research activities on control systems and software. (author). 2 figs

  6. Control and data processing systems in UK nuclear power plant and nuclear facilities

    Energy Technology Data Exchange (ETDEWEB)

    Baldwin, J A; Wall, D N [AEA Technology, Winfrith, Dorchester (United Kingdom)

    1997-07-01

    This note identifies some of the data processing and control systems in UK nuclear power plant, with emphasis on direct digital control systems and sequence control. A brief indication is also given of some of the associated research activities on control systems and software. (author). 2 figs.

  7. Hungarian national nuclear material control and accounting system

    International Nuclear Information System (INIS)

    Lendvai, O.

    1985-01-01

    The Hungarian system for nuclear materials control and accounting is briefly described. Sections include a historical overview, a description of nuclear activities and an outline of the organizational structure of the materials management system. Subsequent sections discuss accounting, verification and international relations

  8. Ultrastructure of the extracellular matrix of bovine dura mater, optic nerve sheath and sclera.

    OpenAIRE

    Raspanti, M; Marchini, M; Della Pasqua, V; Strocchi, R; Ruggeri, A

    1992-01-01

    The sclera, the outermost sheath of the optic nerve and the dura mater have been investigated histologically and ultrastructurally. Although these tissues appear very similar under the light microscope, being dense connective tissues mainly composed of collagen bundles and a limited amount of cells and elastic fibres, they exhibit subtle differences on electron microscopy. In the dura and sclera collagen appears in the form of large, nonuniform fibrils, similar to those commonly found in tend...

  9. Creutzfeldt-Jakob disease and lyophilised dura mater grafts: report of two cases.

    Science.gov (United States)

    Esmonde, T; Lueck, C J; Symon, L; Duchen, L W; Will, R G

    1993-01-01

    Two further cases of Creutzfeldt-Jakob disease (CJD) in association with cadaveric dura mater grafts are described. The clinical features of all such reported cases resemble more closely those of sporadic CJD, in contrast with kuru and the cases of CJD which have arisen after therapy with human pituitary-derived growth hormone. This observation may reflect the route of inoculation of the agent. PMID:8410042

  10. Nuclear safety risk control in the outage of CANDU unit

    International Nuclear Information System (INIS)

    Wu Mingliang; Zheng Jianhua

    2014-01-01

    Nuclear fuel remains in the core during the outage of CANDU unit, but there are still nuclear safety risks such as reactor accidental criticality, fuel element failure due to inability to properly remove residual heat. Furthermore, these risks are aggravated by the weakening plant system configuration and multiple cross operations during the outage. This paper analyzes the phases where there are potential nuclear safety risks on the basis of the typical critical path arrangement of the outage of Qinshan NPP 3 and introduces a series of CANDU-specific risk control measures taken during the past plant outages to ensure nuclear safety during the unit outage. (authors)

  11. Computer-based control systems of nuclear power plants

    International Nuclear Information System (INIS)

    Kalashnikov, V.K.; Shugam, R.A.; Ol'shevsky, Yu.N.

    1975-01-01

    Computer-based control systems of nuclear power plants may be classified into those using computers for data acquisition only, those using computers for data acquisition and data processing, and those using computers for process control. In the present paper a brief review is given of the functions the systems above mentioned perform, their applications in different nuclear power plants, and some of their characteristics. The trend towards hierarchic systems using control computers with reserves already becomes clear when consideration is made of the control systems applied in the Canadian nuclear power plants that pertain to the first ones equipped with process computers. The control system being now under development for the large Soviet reactors of WWER type will also be based on the use of control computers. That part of the system concerned with controlling the reactor assembly is described in detail

  12. Digital electro-hydraulic control system for nuclear turbine

    International Nuclear Information System (INIS)

    Yokota, Yutaka; Tone, Youichi; Ozono, Jiro

    1985-01-01

    The unit capacity of steam turbines for nuclear power generation is very large, accordingly their unexpected stop disturbs power system, and the lowering of their capacity ratio exerts large influence on power generation cost. Therefore, very high reliability is required for turbine EHC controllers which directly control the turbines for nuclear power generation. In order to meet such requirement, Toshiba Corp. has developed high reliability type analog tripled turbine EHC controllers, and delivered them to No. 3 plant in the Fukushima No. 2 Nuclear Power Station and No. 1 plant in the Kashiwazaki Kariwa Nuclear Power Station, Tokyo Electric Power Co., Inc. At present, the trial operation is under way. The development of digital EHC controllers was begun in 1976, and through the digital EHC for a test turbine and that for a small turbine, the digital EHC controllers for the turbines for nuclear power generation were developed. In this paper, the function, constitution, features and maintenance of the digital tripled EHC controllers for the turbines for nuclear power generation, the application of new technology to them, and the confirmation of the control function by simulation are reported. (Kako, I.)

  13. Implementation of the Nuclear Export Control at KAERI

    International Nuclear Information System (INIS)

    Kim, Hyun-Jo; Lee, Byung-Doo; Lee, Sung-Ho

    2006-01-01

    Korea has joined multilateral export control regimes which include Wassenaar Arrangement(WA), Nuclear Suppliers Group(NSG), Missile Technology Control Regime(MTCR) and Australian Group(AG), and their guideline and control lists are reflected in domestic legislation. Also, Catch-all control entered into force on 1 January 2003 in Korea. The frequency of the exports of product as a result of R and D and cooperation with other countries has been increased at Korea Atomic Energy Research Institute (KAERI). Therefore, this report describes the implementation status of a nuclear export control at KAERI and points out the practical issues

  14. Dynamic cost control information system for nuclear power plant construction

    International Nuclear Information System (INIS)

    Wang Yongqing; Liu Wei

    1998-01-01

    The authors first introduce the cost control functions of some overseas popular project management software at present and the specific ways of cost control of nuclear power plant construction in China. Then the authors stress the necessity of cost and schedule control integration and present the concept of dynamic cost control, the design scheme of dynamic cost control information system and the data structure modeling. Based on the above, the authors can develop the system which has the functions of dynamic estimate, cash flow management and cost optimization for nuclear engineering

  15. Regulatory system for control of nuclear facilities in Bangladesh

    International Nuclear Information System (INIS)

    Mollah, A.S.

    2005-01-01

    All human activities have associated risks. Nuclear programme is no exception. The Bangladesh Atomic Energy Commission (BAEC), constituted in February 1973 through the promulgation of the Presidential order 15 of 1973. Functions of BAEC include research and development in peaceful application of atomic energy, generation of electricity and promotion of international relations congenial to implementation of its programmes and projects. In 1993 the Government of Bangladesh promulgated the law on Nuclear Safety and Radiation Control. Considering the human resources, expertise and facilities needed for implementation of the provisions of the NSRC law, BAEC was entrusted with the responsibility to enforce it. The responsibilities of the BAEC cover nuclear and radiological safety within the installations of BAEC and radiological safety in the manifold applications of radioisotopes and radiation sources within the country. An adequate and competent infrastructure has been built to cater to the diverse nuclear and radiation protection requirements of all nuclear facilities in Bangladesh, arising at different stages from site selection to day-to-day operation. In addition, periodic inspections of the nuclear facilities are carried out. The licensing and regulatory inspection systems for controlling of nuclear installations and radiation sources are established. The paper describes the legal provisions, responsibilities and organization of BAEC with special emphasis on nuclear safety and radiation protection of nuclear facilities in Bangladesh. (author)

  16. Basic components of a national control system for nuclear materials

    International Nuclear Information System (INIS)

    Rabot, G.

    1986-01-01

    The paper presents the different aspects related to the organization and the functioning of a national control and accounting system for nuclear materials. The legal aspects and the relations with the IAEA are included

  17. Control of nuclear materials and materials in Argentina

    International Nuclear Information System (INIS)

    Arbor G, A.; Fernandes M, S.

    1988-01-01

    A general view about the safeguards activities in Argentina is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreement signed by Argentina are presented. (E.G.) [pt

  18. Cyclic movement pin mechanism for controlling a nuclear reactor

    International Nuclear Information System (INIS)

    Joly, J.G.; Martin, Jean.

    1981-01-01

    This invention concerns a recurring movement pin mechanism for controlling a nuclear reactor by shifting a neutron absorbing assembly, vertically mobile in the nuclear reactor, to adjust the power and for emergency shut-down. This mechanism ensures a continuous movement and accurate shut-down at any level of the travel height of the absorbing assembly in the core. It also prevents the impacts of the pivoting pins in the control rod slots [fr

  19. Power control of the Angra-2 Nuclear Power Plant

    International Nuclear Information System (INIS)

    Souza Mendes, J.E. de

    1986-01-01

    The systems for the power control of the Nuclear Power Plant Angra 2 have a high degree of automation so that few operator actions are required during power operation. The power control strategy and the operation principles of the control systems, here presented, make possible a great flexibility of the Plant operation. (Author) [pt

  20. Power control device for nuclear reactors

    International Nuclear Information System (INIS)

    Kagawa, Tatsuo

    1984-01-01

    Purpose: To eliminate for requirement of control rods and movable portions, as well as ensure the safety and reliability of the operation. Constitution: A plurality of control tubes are disposed within a reactor core instead of control rods. Tubes are connected from below the reactor core to the control tubes for supplying liquid poisons such as aqueous boric acid to the inside of the control tubes. Further, tubes are connected to the upper portion of the control tubes for guiding the liquid poisons from the reactor core to the outside. The tubes for supplying and discharging the liquid poisons are introduced externally through the flange disposed at the upper portion of a pressure vessel. At the outside of the pressure vessel, are disposed a liquid poison tank, a pressurizing source, a pressure control valve, a liquid level meter and the like. The control for the reactor power is conducted by controlling the level of the liquid poisons in the control tubes. (Ikeda, J.)

  1. Nuclear electric power safety, operation, and control aspects

    CERN Document Server

    Knowles, J Brian

    2013-01-01

    Assesses the engineering of renewable sources for commercial power generation and discusses the safety, operation, and control aspects of nuclear electric power From an expert who advised the European Commission and UK government in the aftermath of Three Mile Island and Chernobyl comes a book that contains experienced engineering assessments of the options for replacing the existing, aged, fossil-fired power stations with renewable, gas-fired, or nuclear plants. From geothermal, solar, and wind to tidal and hydro generation, Nuclear Electric Power: Safety, Operation, and Control Aspects ass

  2. Regulatory control of maintenance activities in Argentine nuclear power plants

    International Nuclear Information System (INIS)

    Calvo, J.C.; Caruso, G.

    2000-01-01

    The main maintenance objective is to assure that the safety features of structures, components and systems of nuclear power plants are kept as designed. Therefore, there is a direct relationship between safety and maintenance. Owing to the above mentioned, maintenance activities are considered a relevant regulatory issue for the Argentine Nuclear Regulatory Authority (ARN). This paper describes the regulatory control to maintenance activities of Argentine nuclear power plants. It also addresses essential elements for maintenance control, routine inspections, special inspections during planned outages, audits and license conditions and requirements. (author)

  3. Accounting systems for special nuclear material control. Technical report

    International Nuclear Information System (INIS)

    Korstad, P.A.

    1980-05-01

    Nuclear material accounting systems were examined and compared to financial double-entry accounting systems. Effective nuclear material accounting systems have been designed using the principles of double-entry financial accounting. The modified double-entry systems presently employed are acceptable if they provide adequate control over the recording and summarizing of transactions. Strong internal controls, based on principles of financial accounting, can help protect nuclear materials and produce accurate, reliable accounting data. An electronic data processing system can more accurately maintain large volumes of data and provide management with more current, reliable information

  4. Is it possible to limit or control a nuclear war

    International Nuclear Information System (INIS)

    Voigt, K.D.

    1983-01-01

    A controlled response after a limited aggression by using strategic nuclear weapons is improbable alone for reasons relating to political institutions and political psychology. As long as it is in the least possible that a threat with selective nuclear strikes may result in a great atomic war and by that in mutual destruction the threat itself is - according to rational standards - unbelievable. Plans to prepare oneself technically and politically to make a nuclear war for several months at an controlled extent are the expression of a wrong way of peaceful policy and military strategy. The money spent for such plannings is at best wasted money. (orig./HSCH) [de

  5. Screen-based process control in nuclear plants

    International Nuclear Information System (INIS)

    Hinz, W.; Arnoldt, C.; Hessler, C.

    1993-01-01

    Requirements, development and conceptual design of a screen-based control room for nuclear power plants are outlined. The control room consists of three or four equally equipped operator workstations comprising screens for process information and manual process control. A plant overview will assist the coordination among the operators. A safety classified backup system (safety control area) is provided to cover postulated failures of the control means. Some aspects of ergonomical validation and of future development trends are discussed. (orig.) [de

  6. The European programme for controlled nuclear fusion

    International Nuclear Information System (INIS)

    This illustrated document is intended for information only and should not be used as a technical reference. The nuclear fusion reactors are presented with the two approaches: magnetic confinement and inertial confinement; are described: the place of fusion in the world energy scene and its importance for Europe, how research is at present organized, and the European programme with this next stage: the JET (Joint European Torus), the largest tokamak machine in Europe

  7. Use of Nuclear Material Accounting and Control for Nuclear Security Purposes at Facilities. Implementing Guide

    International Nuclear Information System (INIS)

    2015-01-01

    Nuclear material accounting and control (NMAC) works in a complementary fashion with the international safeguards programme and physical protection systems to help prevent, deter or detect the unauthorized acquisition and use of nuclear materials. These three methodologies are employed by Member States to defend against external threats, internal threats and both state actors and non-state actors. This publication offers guidance for implementing NMAC measures for nuclear security at the nuclear facility level. It focuses on measures to mitigate the risk posed by insider threats and describes elements of a programme that can be implemented at a nuclear facility in coordination with the physical protection system for the purpose of deterring and detecting unauthorized removal of nuclear material

  8. A Study on the cooperation policy in multilateral nuclear control regimes and the advancing of national export control system

    International Nuclear Information System (INIS)

    Lee, Byung Wook; Oh, K. B.; Yang, M. H.; Lee, H. M.; Lee, K. S.; Ko, H. S.; Ryu, J. S.; Kim, J. S.

    2004-08-01

    This study carried out the analysis of trends of the multilateral nuclear control in four aspects. First, this study analyzes the past trends of the international nuclear non-proliferation regime, which includes the NPT, the IAEA safeguards system, the international nuclear export control regime and the physical protection of nuclear materials. Second, this study establishes the multilateral cooperation strategies for the effective cooperation in the process of strengthening the nuclear control regimes. Third, this study reviews the major agenda of nuclear control regimes and establishes national positions on each agenda. Fourth, this study also analyzes outstanding issues in nuclear control regimes and derives some factors to reflect national nuclear control system

  9. Power control device in nuclear reactor

    International Nuclear Information System (INIS)

    Koyama, Kazuaki.

    1981-01-01

    Purpose: To enable smooth power changes in power conditioning systems by calculating forecast values for the neutron flux distribution and power distribution and by controlling the driving speed of control rods so as to correspond the forecast values with aimed values. Constitution: Control rod position is detected by a position detector and sent to a control computer as the position information. At the same time, the neutron flux distribution information is obtained by the neutron monitors, the power distribution information is obtained by a reactor power computer and they are outputted to the control computer. The control computer calculates the forecast values for the neutron flux distribution and the reactor power distribution from the information, and compares them with the aimed values from a setter and then outputs control signals so as to correspond the forecast values with the aimed values. The control rods can be inserted in appropriate velocity by the control signals. (Horiuchi, T.)

  10. Control system for nuclear power plant

    International Nuclear Information System (INIS)

    Sato, Takahisa; Kawahara, Haruo.

    1979-01-01

    Purpose: To save man power and improve operation reliability by enabling automatic selection and operation of control rods from a central processing unit by the input operation of an operator. Constitution: An input operation for the control information corresponding to the running conditions such as operation sequence of control rods and loading-unloading positions is effected using a light pen or the like on a CRT display device. The signal from the light pen is supplied by way of the CRT control device to the input of a central processing unit and the control rod selection signal and the load-unload signal are supplied to the input of a control rod driving circuit. A control signal is sent out from the above circuit so as to enable the same operation as set by the operator, whereby the control rod is driven. The control rod is displaced on the cathode ray tube. (Furukawa, Y.)

  11. Control room, emergency control system and local control panels in nuclear power plants

    International Nuclear Information System (INIS)

    1988-01-01

    The requirements on planning and construction of control boards including ergonomic-technical designing are specified in this rule. The specifications put the requirements on the design of place, process and environment of work, which are mentioned in the sections 90 and 91 of the labor-management relations act, into more concrete terms for the safety-relevant control panels as work places in a nuclear power station. The work places at control panels are not considered as video workstations in the sense of the 'Safety Rules for Video Workstations in the Office Sector' published by the General Association of the Industrial Trade Associations. The requirements are based on the operation and information technology realized at present in control panels of stationary nuclear power plants. (orig./HP) [de

  12. Performance and quality control of nuclear medicine instrumentation

    International Nuclear Information System (INIS)

    Paras, P.

    1981-01-01

    The status and the recent developments of nuclear medicine instrumentation performance, with an emphasis on gamma-camera performance, are discussed as the basis for quality control. New phantoms and techniques for the measurement of gamma-camera performance parameters are introduced and their usefulness for quality control is discussed. Tests and procedures for dose calibrator quality control are included. Also, the principles of quality control, tests, equipment and procedures for each type of instrument are reviewed, and minimum requirements for an effective quality assurance programme for nuclear medicine instrumentation are suggested. (author)

  13. The remote control of nuclear microprobes over the Internet

    International Nuclear Information System (INIS)

    Churms, C.L.; Prozesky, V.M.; Springhorn, K.A.

    1999-01-01

    Whereas the concept of remote control is not new, the required equipment and data link have typically been costly and specialized. With the growing availability of reliable Internet connection, it has however become possible and increasingly attractive to be able to control complex equipment remotely over the Internet. Some methods of Internet Remote control are discussed, bearing in mind the specific needs of nuclear microprobe control. One such system has been implemented at the NAC nuclear microprobe, and even though improvements are envisaged, it is already functioning satisfactorily

  14. Plasma physics and controlled nuclear fusion research

    International Nuclear Information System (INIS)

    1980-01-01

    Full text: During the last decade, growing efforts have been devoted to studying the possible forms an electricity-producing thermonuclear reactor might take and the various technical problems that will have to be overcome. Previous IAEA Conferences took place in Salzburg (1961), Culham (1965), Novosibirsk (1968), Madison (1971), Tokyo (1974), Berchtesgaden (1976) and Innsbruck (1978) The exchange of information that has characterized this series of meetings is an important example of international co-operation and has contributed substantially to progress in controlled fusion research. The results of experiments in major research establishments, as well as the growing scientific insights in the field of plasma physics, give hope that the realization of nuclear fusion will be made possible on a larger scale and beyond the laboratory stage by the end of this century. The increase of the duration of existing tokamak discharges requires solution of the impurity control problem. First results from the new big machines equipped with the poloidal divertor recently came into operation. PDX (USA) and ASDEX (F.R. of Germany) show that various divertor configurations can be established and maintained and that the divertors function in the predicted manner. The reduction of high-Z impurities on these machines by a factor 10 was achieved. As a result of extensive research on radio-frequency (RF) plasma heating on tokamaks: PLT (USA), TFR (France), JFT-2 (Japan), the efficiency of this attractive method of plasma heating comparable to neutral beam heating was demonstrated. It was shown that the density of the input power of about 5-10 kW/cm 2 is achievable and this limit is high enough for application to reactor-like machines. One of the inspiring results reported at the conference was the achievement of value (the ratio of plasma pressure to magnetic field pressure) of ∼ 3% on tokamaks T-11 (USSR) and ISX-B (USA). It is important to note that this value exceeds the

  15. Material control and accounting at Exxon Nuclear, I

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1985-01-01

    The nuclear material control and accounting system at Exxon Nuclear will be described in detail. Subjects discussed will include: the basis of the MC and A system, the nuclear materials accounting systems (NMRS and NICS), physical inventory taking, IAEA inspection experience, safeguards organization, measurements and measurement control, MUF evaluation, accounting forms and reports and use of tamper-indicating seals. The general requirements for material accounting and control in this type of a bulk-handling facility are described. The way those requirements are met for the subject areas shown above is illustrated using a reference (Model Plant) version of the Exxon Nuclear plant The difference between the item-accounting procedures used at reactor facilities and the bulk-accounting procedures used at fuel fabrication facilities is discussed in detail

  16. Documents pertaining to safety control of nuclear facilities

    International Nuclear Information System (INIS)

    1998-01-01

    The Finnish Radiation and Nuclear Safety Authority (STUK) controls the safety of nuclear facilities in Finland. This control encompasses on one hand the evaluation of plant safety on the basis of plans and analyses pertaining to the plant and on the other hand the inspection of plant structures, systems and components as well as of operational activity. STUK also monitors plants operational experience feedback and technical developments in the field, as well as the development of safety research and takes the necessary measures on their basis. Guide YVL 1.1 describes how STUK controls the design, construction and operation of nuclear power plants. The documents to be submitted to STUK are described in the nuclear energy legislation and YVL guides. This guide presents the mode of delivery, quality, contents and number of documents to be submitted to STUK

  17. Regulatory control of nuclear safety in Finland. Annual report 1999

    International Nuclear Information System (INIS)

    Tossavainen, K.

    2000-06-01

    This report concerns the regulatory control of nuclear energy in Finland in 1999. Its submission to the Ministry of Trade and Industry by the Finnish Radiation and Nuclear Safety Authority (STUK) is stipulated in section 121 of the Nuclear Energy Decree. STUK's regulatory work was focused on the operation of the Finnish nuclear power plants as well as on nuclear waste management and safeguards of nuclear materials. The operation of the Finnish nuclear power plants was in compliance with the conditions set out in their operating licences and with current regulations, with the exception of some inadvertent deviations from the Technical Specifications. No plant events endangering the safe use of nuclear energy occurred. The individual doses of all nuclear power plant workers remained below the dose threshold. The collective dose of the workers was low, compared internationally, and did not exceed STUK's guidelines at either nuclear power plant. The radioactive releases were minor and the dose calculated on their basis for the most exposed individual in the vicinity of the plant was well below the limit established in a decision of the Council of State at both Loviisa and Olkiluoto nuclear power plants. STUK issued statements to the Ministry of Trade and Industry about the environmental impact assessment programme reports on the possible nuclear power plant projects at Olkiluoto and Loviisa and about the continued operation of the research reactor in Otaniemi, Espoo. A Y2k-related safety assessment of the Finnish nuclear power plants was completed in December. In nuclear waste management STUK's regulatory work was focused on spent fuel storage and final disposal plans as well as on the treatment, storage and final disposal of reactor waste. No events occurred in nuclear waste management that would have endangered safety. A statement was issued to the Ministry of Trade and Industry about an environmental impact assessment report on a proposed final disposal facility for

  18. Regulatory control of nuclear safety in Finland. Annual report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    2000-06-01

    This report concerns the regulatory control of nuclear energy in Finland in 1999. Its submission to the Ministry of Trade and Industry by the Finnish Radiation and Nuclear Safety Authority (STUK) is stipulated in section 121 of the Nuclear Energy Decree. STUK's regulatory work was focused on the operation of the Finnish nuclear power plants as well as on nuclear waste management and safeguards of nuclear materials. The operation of the Finnish nuclear power plants was in compliance with the conditions set out in their operating licences and with current regulations, with the exception of some inadvertent deviations from the Technical Specifications. No plant events endangering the safe use of nuclear energy occurred. The individual doses of all nuclear power plant workers remained below the dose threshold. The collective dose of the workers was low, compared internationally, and did not exceed STUK's guidelines at either nuclear power plant. The radioactive releases were minor and the dose calculated on their basis for the most exposed individual in the vicinity of the plant was well below the limit established in a decision of the Council of State at both Loviisa and Olkiluoto nuclear power plants. STUK issued statements to the Ministry of Trade and Industry about the environmental impact assessment programme reports on the possible nuclear power plant projects at Olkiluoto and Loviisa and about the continued operation of the research reactor in Otaniemi, Espoo. A Y2k-related safety assessment of the Finnish nuclear power plants was completed in December. In nuclear waste management STUK's regulatory work was focused on spent fuel storage and final disposal plans as well as on the treatment, storage and final disposal of reactor waste. No events occurred in nuclear waste management that would have endangered safety. A statement was issued to the Ministry of Trade and Industry about an environmental impact assessment report on a proposed final

  19. Control of WWER-440 nuclear reactor

    International Nuclear Information System (INIS)

    Wagner, K.; Drab, F.; Grof, V.

    1978-01-01

    The V-1 reactor control systems are described. The data acquisition and processing system fulfils four main functions, ie., reactor start-up and power increase to 10% of the rated power, automatic power control within 3% and 110% of the rated power, reactivity compensation, and reactor protection. The automatic control system ensures constant steam pressure maintained with an accuracy of +-0.05 MPa. Reactivity compensation and spatial power distribution is mainly safeguarded by boric acid control. The V-1 reactor protection system has four levels of accident protection depending on the gravity of the failure. The philosophy of automation of the V-1 reactor control and protection system is based on autonomous automatic controlers and on the direct control of the individual sets and technological equipment. In conclusion, development trends are briefly outlined of control and protection systems of light water reactor power plants. (Z.M.)

  20. La deuda pública española y las agencias de calificación: luces y sombres

    OpenAIRE

    Belío Sánchez, Laura

    2013-01-01

    Visión de la evolución de la deuda pública española, desde el inicio de la democracia hasta la actual crisis económica y de las agencias de calificación, las cuales han influido con sus notas en la economía española. Grado en Administración y Dirección de Empresas

  1. Autenticidad, marca personal y agencia sexual: el posfeminismo lésbico en youtube

    Directory of Open Access Journals (Sweden)

    Antonio Caballero Gálvez

    2017-12-01

    Full Text Available Youtube, espacio mediático postelevisivo por excelencia, modifica los códigos de representación y comunicación entre jóvenes sobre temas como la identidad y la orientación sexual. Así, la plataforma de vídeo se ha convertido en el arma definitiva del activismo LGTBQ (Polo, 2016 donde gays, lesbianas, bisexuales y queers se abren paso en la red. Esto ocurre mientras el posfeminismo se consolida en los medios mainstream como lo que parece la única vía de representación femenina: ostentado en numerosas ocasiones por iconos de la cultura popular, el posfeminismo se caracteriza por un efecto ‘rebote’ contra el feminismo histórico, reivindicando una mujer liberada, asertiva y auténtica, obviando así las injusticias del patriarcado que siguen existiendo (Tasker y Negra, 2005; Gill, 2007. Los patrones de estas representaciones posfeministas están vinculadas por una parte con la autenticidad, el éxito, la libertad de elección y el empoderamiento femenino y, por otra parte, con la agencia sexual de las mujeres y el uso que éstas hacen de su cuerpo para conseguir privilegios. Este estudio indaga en cómo las representaciones de youtubers lesbianas, por una parte, reproducen y, por otra parte, se resisten a este posfeminismo mainstream. Con este objetivo hemos seleccionado una muestra de cinco youtubers lesbianas españolas con un gran número de suscriptores (YellowMellow, Dulceida, Xuri Fenton, Gominuke, Koala Rabioso. Los resultados muestran, por un lado, la gestión del propio cuerpo principalmente situada fuera de la mirada masculina y generadora de nuevos imaginarios - en este caso, lésbicos. Esto otorga a las youtubers lesbianas una agencia sexual que no está enmarcada en el posfeminismo, sino que desarrolla su propio lenguaje. Por otro lado, estas youtubers ostentan una autenticidad más reflexiva (Giddens, 1994 y más comprometida que la de las representaciones posfeministas, generalmente vacías de contenido pol

  2. Technology in the policy process - controlling nuclear power

    International Nuclear Information System (INIS)

    Collingridge, D.

    1983-01-01

    The discussion in this book is built around nuclear power. The technology of nuclear power is shown to have features which make it inflexible in the sense that, once built, it is difficult and expensive to control. If inflexible technology is to be avoided, it is crucially important to be able to identify this failing at an early stage in the technology's development, before it has acquired an immunity to political control. Again, this problem is approached through the example of nuclear power, in particular the breeder reactor. The breeder is shown to be even less flexible than today's nuclear technology, because it will have higher capital costs, be of greater capital intensity, longer lead time, larger unit size, and will require more infrastructure for its operation. If this is developed, the breeder will be even less open to political control than the nuclear plant of the present. To put it another way, its planning will be even more open to errors and whatever errors are made will be even more costly than for existing nuclear technology. It is therefore even less of a socially and economically acceptable technology than today's nuclear power. (author)

  3. Nuclear power plant pressure vessels. Control of piping

    International Nuclear Information System (INIS)

    2000-01-01

    The guide presents requirements for the pipework of nuclear facilities in Finland. According to the section 117 of the Finnish Nuclear Energy Degree (161/88), the Radiation and Nuclear Safety Authority of Finland (STUK) controls the pressure vessels of nuclear facilities in accordance with the Nuclear Energy Act (990/87) and, to the extent applicable in accordance with the Act of Pressure Vessels (98/73) and the rules and regulations issued by the virtue of these. In addition STUK is an inspecting authority of pressure vessels of nuclear facilities in accordance with the Pressure Vessel Degree (549/1973). According to the section of the Pressure Vessel Degree, a pressure vessel is a steam boiler, pressure container, pipework of other such appliance in which the pressure is above or may come to exceed the atmospheric pressure. Guide YVL 3.0 describes in general terms how STUK controls pressure vessels. STUK controls Safety Class 1, 2 and 3 piping as well as Class EYT (non-nuclear) and their support structures in accordance with this guide and applies the provisions of the Decision of the Ministry of Trade and Industry on piping (71/1975) issued by virtue of the Pressure Vessel Decree

  4. Quality control of nuclear medicine instruments, 1991; Control de calidad de los instrumentos de medicina nuclear, 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    This document gives detailed guidance on the quality control of various instruments used in nuclear medicine. A first preliminary document was drawn up in 1979. A revised and extended version, incorporating recommended procedures, test schedules and protocols was prepared in 1982. The first edition of 'Quality Control of Nuclear Medicine Instruments', IAEA-TECDOC-317, was printed in late 1984. Recent advances in the field of nuclear medicine imaging made it necessary to add a chapter on Camera-Computer Systems and another on SPECT Systems.

  5. Control of Nuclear Material in Republic of Croatia

    International Nuclear Information System (INIS)

    Cizmek, A.; Medakovic, S.; Prah, M.; Novosel, N.

    2008-01-01

    State Office for Nuclear Safety (SONS) is established based on 'Nuclear Safety Act' (Official Gazette No. 173/2003) as an independent state organization responsible for all questions in connection with safe use of nuclear energy and technology, for expert matters of preparedness in the case of nuclear emergency, as well as for international co-operation in these fields (regulatory body). In the second half of year 2006, stationary detection systems for nuclear and other radioactive materials were installed on Border Crossing Bregana, Croatia. Yantar 2U, which is the commercial name of the system, is integrated automatic system capable of detection of nuclear and other radioactive materials prepared for fixed-site customs applications (Russian origin). Installed system contains portal monitors, camera, communication lines and communication boxes and server. Two fully functional separate systems has been installed on BC Bregana, one on truck entrance and another one on car entrance. In this article the operational experience of installed system is presented. This includes statistical analysis of recorded alarms, evaluation of procedures for operational stuff and maintenance and typical malfunction experience, as well as some of the recommendation for future use of detection systems. Ordinance on the control of nuclear material and special equipment (Official Gazette No. 15/08) lays down the list of nuclear materials and special equipment as well as the list of other activities related to the production of special equipment and non-nuclear materials; the contents of the declaration of intent form for export/import of goods, the form for notifying export/import of goods, the form for notifying transport of nuclear material, the form for notifying the activity related to producing of special equipment and non-nuclear material, as well as of the form of the report on nuclear material balance in the user's material balance area. This Ordinance lays down the method of

  6. Reactor control and protection of full scope simulator for Qinshan 300 MW Nuclear Power Unit

    International Nuclear Information System (INIS)

    Zhu Jinping; Sun Jiliang

    1996-01-01

    The control and protection simulation of Qinshan 300 MW Nuclear Power Unit, including the nuclear control, the pressurizer pressure control, the pressurizer level control, the rod control, the reactor shutdown protection and engineered safety feature etc are briefly introduced

  7. State of controlled nuclear fusion research

    International Nuclear Information System (INIS)

    Rodrigo, A.B.

    1978-04-01

    The development of a commercial fusion reactor requires an adequate solution to the problems of heating and confinement of the nuclear fuel, as well as a considerable effort in materials technology and reactor engineering. A general discussion is presented of the status of the research connected with the most advanced concepts, indicating in each case the present situation and the main problems that must be solved to meet the requeriments estimated for power reactors. In particular, the laser-inertial concept is reviewed in detail. (author) [es

  8. Hermenéutica de la persona. Modos de reconocimiento a través de la agencia.

    Directory of Open Access Journals (Sweden)

    Francisco Guzmán Castillo

    2010-08-01

    Full Text Available El propósito de este artículo es analizar cómo y por qué reconocemos a los otros como personas plenas, y cuáles son los mecanismos sociales que justifican y permiten que algunas personas sean tratadas como objetos, de forma opresiva y discriminatoria. En mi análisis partiré de la agencia intencional como elemento necesario en cualquier modelo de construcción de la persona. Aún así, se discutirá si la intencionalidad puede considerarse como un atributo exclusivo de los humanos. Expondré tres modelos explicativos para describir la manera en que las personas se relacionan unos con otros y con el entorno. Estos modelos son: el de los tipos literarios, el del dipolo de agencia y el modelo espacial de agencia. Finalmente reivindicaré la importancia del cuerpo como instancia constitutiva del constructo persona, con una importancia igual a la de la subjetividad y la de las circunstancias ambientales.

  9. Hermenéutica de la persona. Modos de reconocimiento a través de la agencia.

    Directory of Open Access Journals (Sweden)

    Francisco Guzmán Castillo

    2010-08-01

    Full Text Available El propósito de este artículo es analizar cómo y por qué reconocemos a los otros como personas plenas, y cuáles son los mecanismos sociales que justifican y permiten que algunas personas sean tratadas como objetos, de forma opresiva y discriminatoria. En mi análisis partiré de la agencia intencional como elemento necesario en cualquier modelo de construcción de la persona. Aún así, se discutirá si la intencionalidad puede considerarse como un atributo exclusivo de los humanos. Expondré tres modelos explicativos para describir la manera en que las personas se relacionan unos con otros y con el entorno. Estos modelos son: el de los tipos literarios, el del dipolo de agencia y el modelo espacial de agencia. Finalmente reivindicaré la importancia del cuerpo como instancia constitutiva del constructo persona, con una importancia igual a la de la subjetividad y la de las circunstancias ambientales. Fecha de recepción: 04 de julio de 2010. Fecha de aceptación: 10 de agosto de 2010.

  10. Heating control system for nuclear reactor

    International Nuclear Information System (INIS)

    Shinohara, Kaoru.

    1981-01-01

    Purpose: To automatically control reactor heating while keeping the condition of temperature rising rate by determining the deviations based on the reactor water temperature, the aimed temperature and the aimed temperature rising rate and operating control rods. Constitution: Actual temperature in the reactor is measured by a temperature detector and compared with a value from a setter to determine the temperature deviation. While on the other hand, the rising rate for the measured temperature is calculated in a differentiator and compared with a value from a setter to determine the deviation, which is passed through an integrator to calculate the deviation for the temperature rising rate. The signals for the temperature deviation and the temperature rising rate deviation are selected in a lower value preference circuit and the operation amount for the control rod is judged in a control rod operation judging section depending on the deviation amount. The control rod to be operated is determined in a sequence control section for the selection of control rod. The control rod selected and the direction of the operation are displayed on a display and the selected control rod is automatically driven by a control rod drives to thereby carry our reactor heating. (Furukawa, Y.)

  11. Nuclear export criteria and controls in the United States

    International Nuclear Information System (INIS)

    Shapar, H.K.

    1979-01-01

    The paper describes the export licensing procedure and the modifications made to it under the 1978 Nuclear Non-Proliferation Act (NNPA) to achieve greater control over exports of nuclear material and facilities. Export licences from the Nuclear Regulatory Commission are now required for certain items connected with nuclear plant construction and the procedure for obtaining the views of the Executive Branch have been formalised. The President is enabled to override the denial of an export licence by the NRC. Amongst the new criteria on the export licensing procedure added to the 1954 Atomic Energy Act, the NNPA provides that the IAEA Safeguards under the Non-Proliferation Treaty are applicable to exported nuclear material or facilities, together with adequate physical protection measures. (NEA) [fr

  12. Nuclear Arms Control, Nonproliferation, and Counterterrorism: Impacts on Public Health

    Science.gov (United States)

    Pregenzer, Arian

    2014-01-01

    Reducing the risks of nuclear war, limiting the spread of nuclear weapons, and reducing global nuclear weapons stockpiles are key national and international security goals. They are pursued through a variety of international arms control, nonproliferation, and counterterrorism treaties and agreements. These legally binding and political commitments, together with the institutional infrastructure that supports them, work to establish global norms of behavior and have limited the spread of weapons of mass destruction. Beyond the primary security objectives, reducing the likelihood of the use of nuclear weapons, preventing environmental releases of radioactive material, increasing the availability of safe and secure nuclear technology for peaceful purposes, and providing scientific data relevant to predicting and managing the consequences of natural or human-caused disasters worldwide provide significant benefits to global public health. PMID:24524501

  13. Robust control technique for nuclear power plants

    International Nuclear Information System (INIS)

    Murphy, G.V.; Bailey, J.M.

    1989-03-01

    This report summarizes the linear quadratic Guassian (LQG) design technique with loop transfer recovery (LQG/LTR) for design of control systems. The concepts of return ratio, return difference, inverse return difference, and singular values are summarized. The LQG/LTR design technique allows the synthesis of a robust control system. To illustrate the LQG/LTR technique, a linearized model of a simple process has been chosen. The process has three state variables, one input, and one output. Three control system design methods are compared: LQG, LQG/LTR, and a proportional plus integral controller (PI). 7 refs., 20 figs., 6 tabs

  14. The Designing Bus for Nuclear Safety Class Controller

    International Nuclear Information System (INIS)

    Lee, Dongil; Lee, Myeongkyun; Yun, Donghwa; Ryoo, Kwangki

    2013-01-01

    EtherCAT (Ethernet for Control Automation Technology) is based on the IEEE 802.3 standard as one of the communication which is the I/O (Input/Output), sensors and communication function of PLC (Programmable Logic Controller) in industry and factory environment use is increasing. The Nuclear Safety Class Controller implemented by the EtherCAT applied bus can be shown the improving performance of data transmission in the controller

  15. The Designing Bus for Nuclear Safety Class Controller

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dongil; Lee, Myeongkyun; Yun, Donghwa [PONUTech Co,. Ltd., Research Institute, Ulsan (Korea, Republic of); Ryoo, Kwangki [Hanbat National Univ., Daejeon (Korea, Republic of)

    2013-10-15

    EtherCAT (Ethernet for Control Automation Technology) is based on the IEEE 802.3 standard as one of the communication which is the I/O (Input/Output), sensors and communication function of PLC (Programmable Logic Controller) in industry and factory environment use is increasing. The Nuclear Safety Class Controller implemented by the EtherCAT applied bus can be shown the improving performance of data transmission in the controller.

  16. A study of fuzzy control in nuclear scale system

    International Nuclear Information System (INIS)

    Wang Yu; Zhang Yongming; Wu Ruisheng; Du Xianbin; Liu Shixing

    2001-01-01

    The new development of the nuclear scale system which uses fuzzy control strategy is presented. Good results have been obtained in using fuzzy control to solve the problems, such as un-linearities, instabilities, time delays, which are difficultly described by formula, etc. The fuzzy variance, membership function and fuzzy rules are given, and the noise disturbances of fuzzy control and PID control are also given

  17. Spent Nuclear Fuel project interface control plan

    International Nuclear Information System (INIS)

    Reilly, M.A.

    1995-01-01

    This implementation process philosophy is in keeping with the ongoing reengineering of the WHC Controlled Manuals to achieve interface control within the SNF Project. This plan applies to all SNF Project sub-project to sub-project, and sub-project to exteranl (both on and off the Hanford Site) interfaces

  18. Engineering schedule control of nuclear power project planning and management

    International Nuclear Information System (INIS)

    Meng Hao

    2014-01-01

    Nuclear power design is the important part of project management of nuclear power project, it is the way to control the project organization, design schedule, design progress, design quality and cost control. The good schedule system and control is the key to the success for the project. It is also analyzed the problem during the project, by using some theory and analyze the project structure, design schedule management, IED and document management and interface management propose some new idea for better improve the design management to finally better improve the management quality and efficiency. (author)

  19. Nuclear reactivity control using laser induced polarization

    International Nuclear Information System (INIS)

    Bowman, C.D.

    1990-01-01

    This patent describes a control element for reactivity control of a fission source provides an atomic density of 3 He in a control volume which is effective to control criticality as the 3 He is spin-polarized. Spin-polarization of the 3 He affects the cross section of the control volume for fission neutrons and hence, the reactivity. An irradiation source is directed within the 3 He for spin-polarizing the 3 He. An alkali-metal vapor may be included with the 3 He where a laser spin-polarizes the alkali-metal atoms which in turn, spin-couple with 3 He to spin-polarize the 3 He atoms

  20. Use of hafnium in control bars of nuclear reactors

    International Nuclear Information System (INIS)

    Ramirez S, J.R.; Alonso V, G.

    2003-01-01

    Recently the use of hafnium as neutron absorber material in nuclear reactors has been reason of investigation by virtue of that this material has nuclear properties as to the neutrons absorption and structural that can prolong the useful life of the control mechanisms of the nuclear reactors. In this work some of those more significant hafnium properties are presented like nuclear material. Also there are presented calculations carried out with the HELIOS code for fuel cells of uranium oxide and of uranium and plutonium mixed oxides under controlled conditions with conventional bars of boron carbide and also with similar bars to which are substituted the absorbent material by metallic hafnium, the results are presented in this work. (Author)

  1. Corrigendum to ;Accelerated materials evaluation for nuclear applications.; [J. Nucl. Mater. 488 (2017) 46-62

    Science.gov (United States)

    Griffiths, M.; Walters, L.; Greenwood, L. R.; Garner, F. A.

    2017-08-01

    In this article, a typographical error appears in Table 1 for the thermal flux of the FFTF reactor. We would like to take the opportunity to add another reactor, BR2, to the list. The corrected table is provided in this corrigendum.

  2. Tangible interfaces for virtual nuclear power plant control desk

    Energy Technology Data Exchange (ETDEWEB)

    Aghina, Mauricio Alves C.; Mol, Antonio Carlos A.; Jorge, Carlos Alexandre F.; Lapa, Celso M.F. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Nomiya, Diogo [Engenharia Eletrica (UFRJ), Universidade Federal do Rio de Janeiro, RJ (Brazil); Cunha, Gerson G.; Landau, Luiz [Programa de Engenharia Civil (PEC/COPPE/UFRJ), Universidade Federal do Rio de Janeiro, RJ (Brazil)

    2011-07-01

    Due to the high safety requirements for nuclear power plant operation, control desks must be designed in such a way operators can take all the procedures safely, with a good overview of all variable indicators and easy access to actuator controls. Also, operators must see alarms indication in a way they can easily identify any abnormal conditions and bring the NPP back to normal operation. The ergonomics and human factors fields have helped evaluations to improve the design of nuclear power plant control systems. Lately, the use of virtual control desks have helped even more such evaluations, by integrating in one platform both nuclear power plant dynamics simulator with a high visual fidelity control desk proto typing. Operators can interact with these virtual control desks in a similar way as with real ones. Such a virtual control desk has been under development at Instituto de Engenharia Nuclear, IEN/CNEN. This paper reports the latest improvements, with the use of more interaction modes, to turn operation a friendlier task. An automatic speech recognition interface has been implemented as a self-contained system, by accessing directly MS Windows Application Interface, and with online neural network training for spoken commend recognition. Thus, operators can switch among different desk views. Besides this, head tracking interfaces have been integrated with the virtual control desk, to move within desk views according to users head movements. Both marker and markerless-based head tracking interfaces have been implemented. Results are shown and commented. (author)

  3. Tangible interfaces for virtual nuclear power plant control desk

    International Nuclear Information System (INIS)

    Aghina, Mauricio Alves C.; Mol, Antonio Carlos A.; Jorge, Carlos Alexandre F.; Lapa, Celso M.F.; Nomiya, Diogo; Cunha, Gerson G.; Landau, Luiz

    2011-01-01

    Due to the high safety requirements for nuclear power plant operation, control desks must be designed in such a way operators can take all the procedures safely, with a good overview of all variable indicators and easy access to actuator controls. Also, operators must see alarms indication in a way they can easily identify any abnormal conditions and bring the NPP back to normal operation. The ergonomics and human factors fields have helped evaluations to improve the design of nuclear power plant control systems. Lately, the use of virtual control desks have helped even more such evaluations, by integrating in one platform both nuclear power plant dynamics simulator with a high visual fidelity control desk proto typing. Operators can interact with these virtual control desks in a similar way as with real ones. Such a virtual control desk has been under development at Instituto de Engenharia Nuclear, IEN/CNEN. This paper reports the latest improvements, with the use of more interaction modes, to turn operation a friendlier task. An automatic speech recognition interface has been implemented as a self-contained system, by accessing directly MS Windows Application Interface, and with online neural network training for spoken commend recognition. Thus, operators can switch among different desk views. Besides this, head tracking interfaces have been integrated with the virtual control desk, to move within desk views according to users head movements. Both marker and markerless-based head tracking interfaces have been implemented. Results are shown and commented. (author)

  4. Geochemical Controls on Nuclear Magnetic Resonance Measurements

    International Nuclear Information System (INIS)

    Knight, Rosemary; Prasad, Manika; Keating, Kristina

    2003-01-01

    OAK-B135 Our research objectives are to determine, through an extensive set of laboratory experiments, the effect of the specific mineralogic form of iron and the effect of the distribution of iron on proton nuclear magnetic resonance (NMR) relaxation mechanisms. In the first nine months of this project, we have refined the experimental procedures to be used in the acquisition of the laboratory NMR data; have ordered, and conducted preliminary measurements on, the sand samples to be used in the experimental work; and have revised and completed the theoretical model to use in this project. Over the next year, our focus will be on completing the first phase of the experimental work where the form and distribution of the iron in the sands in varied

  5. [A set of quality and safety indicators for hospitals of the "Agencia Valenciana de Salud"].

    Science.gov (United States)

    Nebot-Marzal, C M; Mira-Solves, J J; Guilabert-Mora, M; Pérez-Jover, V; Pablo-Comeche, D; Quirós-Morató, T; Cuesta Peredo, D

    2014-01-01

    To prepare a set of quality and safety indicators for Hospitals of the «Agencia Valenciana de Salud». The qualitative technique Metaplan® was applied in order to gather proposals on sustainability and nursing. The catalogue of the «Spanish Society of Quality in Healthcare» was adopted as a starting point for clinical indicators. Using the Delphi technique, 207 professionals were invited to participate in the selecting the most reliable and feasible indicators. Lastly, the resulting proposal was validated with the managers of 12 hospitals, taking into account the variability, objectivity, feasibility, reliability and sensitivity, of the indicators. Participation rates varied between 66.67% and 80.71%. Of the 159 initial indicators, 68 were prioritized and selected (21 economic or management indicators, 22 nursing indicators, and 25 clinical or hospital indicators). Three of them were common to all three categories and two did not match the specified criteria during the validation phase, thus obtaining a final catalogue of 63 indicators. A set of quality and safety indicators for Hospitals was prepared. They are currently being monitored using the hospital information systems. Copyright © 2013 SECA. Published by Elsevier Espana. All rights reserved.

  6. The control of emissions from nuclear power reactors in Canada

    International Nuclear Information System (INIS)

    Gorman, D.J.; Neil, B.C.J.; Chatterjee, R.M.

    1988-01-01

    Nuclear power reactors in Canada are of the CANDU pressurised heavy water design. These are located in the provinces of Ontario, Quebec, and New Brunswick. Most of the nuclear generating capacity is in the province of Ontario which has 16 commissioned reactors with a total capacity of 11,500 MWe. There are four reactors under construction with an additional capacity of 3400 MWe. Nuclear power currently accounts for approximately 50% of the electrical power generation of Ontario. Regulation of the reactors is a Federal Government responsibility administered by the Atomic Energy Control Board (AECB) which licenses the reactors and sets occupational and public dose limits

  7. Advanced nuclear control and protection system ANCAP-80

    International Nuclear Information System (INIS)

    Asai, Takashi; Okano, Michihiko; Ishibashi, Kengo; Hasegawa, Masakoto; Fukuda, Hiroyoshi; Hosomichi, Renichi.

    1983-01-01

    Advanced reactor protection systems were developed to improve operational reliability and availability and to ease the burden of operators of Mitsubishi PWR Nuclear Power Stations. (Called ANCAP-80; Advanced Nuclear Control And Protection System) For the PWR plants now being planned and in future plans, Mitsubishi will adopt these systems with the following functional features; (1) Four channel protection logic, (2) Automatic bypass logic, (3) Automatic test provision, (4) Optical isolators. (author)

  8. Distributed expert systems for nuclear reactor control

    International Nuclear Information System (INIS)

    Otaduy, P.J.

    1992-01-01

    A network of distributed expert systems is the heart of a prototype supervisory control architecture developed at the Oak Ridge National Laboratory (ORNL) for an advanced multimodular reactor. Eight expert systems encode knowledge on signal acquisition, diagnostics, safeguards, and control strategies in a hybrid rule-based, multiprocessing and object-oriented distributed computing environment. An interactive simulation of a power block consisting of three reactors and one turbine provides a realistic, testbed for performance analysis of the integrated control system in real-time. Implementation details and representative reactor transients are discussed

  9. Application and inspiration of risk control in dose control in Fukushima nuclear accident

    International Nuclear Information System (INIS)

    Yu Shaoqing; Chen Yan; Chai Jianshe; Zhang Chunming

    2013-01-01

    The article introduced the basic concept of risk and risk control methods. Using the risk control methods, we analyzed and evaluated the actions to control dose of public and occupational radiation exposure in the Fukushima Dai-ichi nuclear power plant accident, especially found out the weak points of these actions, and finally discussed the application of the risk control methods in dose management during nuclear accidents. (authors)

  10. Regulatory control of nuclear safety in Finland. Annual report 1998

    Energy Technology Data Exchange (ETDEWEB)

    Tossavainen, K. [ed.

    1999-10-01

    The report describes regulatory control of the safe use of nuclear energy by the Radiation and Nuclear Safety Authority (STUK) in 1998. STUK is the Finnish nuclear safety authority. The submission of this report to the Ministry of Trade and Industry is stipulated in Section 121 of the Nuclear Energy Decree. It was verified by regulatory control that the operation of Finnish NPPs was in compliance with conditions set out in the operating licences of the plants and with regulations currently in force. In addition to supervising the normal operation of the plants, STUK oversaw projects carried out at the plant units, which related to the uprating of their power and the improvement of their safety. STUK issued to the Ministry of Trade and Industry a statement about applications for the renewal of the operating licences of Loviisa and Olkiluoto NPPs, which had been submitted by Imatran Voima Oy and Teollisuuden Voima Oy. Regulatory activities in the field of nuclear waste management were focused on the storage and final disposal of spent fuel as well as the treatment, storage and final disposal of reactor waste. STUK issued a statement to the Ministry of Trade and Industry about an environmental impact assessment programme pertaining to a spent fuel repository project, which had been submitted by Posiva Oy, as well as on Imatran Voima Oy's application concerning the operation of a repository for medium- and low-level reactor waste from Loviisa NPP. The use of nuclear materials was in compliance with the regulations currently in force and also the whereabouts of every batch of nuclear material were ensured by safeguards control. In international safeguards, important changes took place, which were reflected also in safeguards activities at national level. International co-operation continued based on financing both from STUK's budget and from additional sources. The focus of co-operation funded from outside sources was as follows: improvement of the safety of

  11. Regulatory control of nuclear safety in Finland. Annual report 1998

    International Nuclear Information System (INIS)

    Tossavainen, K.

    1999-10-01

    The report describes regulatory control of the safe use of nuclear energy by the Radiation and Nuclear Safety Authority (STUK) in 1998. STUK is the Finnish nuclear safety authority. The submission of this report to the Ministry of Trade and Industry is stipulated in Section 121 of the Nuclear Energy Decree. It was verified by regulatory control that the operation of Finnish NPPs was in compliance with conditions set out in the operating licences of the plants and with regulations currently in force. In addition to supervising the normal operation of the plants, STUK oversaw projects carried out at the plant units, which related to the uprating of their power and the improvement of their safety. STUK issued to the Ministry of Trade and Industry a statement about applications for the renewal of the operating licences of Loviisa and Olkiluoto NPPs, which had been submitted by Imatran Voima Oy and Teollisuuden Voima Oy. Regulatory activities in the field of nuclear waste management were focused on the storage and final disposal of spent fuel as well as the treatment, storage and final disposal of reactor waste. STUK issued a statement to the Ministry of Trade and Industry about an environmental impact assessment programme pertaining to a spent fuel repository project, which had been submitted by Posiva Oy, as well as on Imatran Voima Oy's application concerning the operation of a repository for medium- and low-level reactor waste from Loviisa NPP. The use of nuclear materials was in compliance with the regulations currently in force and also the whereabouts of every batch of nuclear material were ensured by safeguards control. In international safeguards, important changes took place, which were reflected also in safeguards activities at national level. International co-operation continued based on financing both from STUK's budget and from additional sources. The focus of co-operation funded from outside sources was as follows: improvement of the safety of Kola and

  12. Water level control for a nuclear steam generator

    International Nuclear Information System (INIS)

    Wen Tan

    2011-01-01

    Research highlights: → A water level control system for a nuclear steam generator (SG) is proposed. → The parameters of the control system are directly related to those of the plant model thus scheduling is easy to implement in practice. → The proposed gain-scheduled controller can achieve good performance at both low and high power levels. - Abstract: A water level control system for a nuclear steam generator (SG) is proposed. The control system consists of a feedback controller and a feedforward controller. The feedback controller is of first order, the feedforward controller is of second order, and parameters of the two controllers are directly related to the parameters of plant model thus scheduling is easy to implement in practice. Robustness and performance of the feedback and the feedforward controllers are analyzed in details and tuning of the two parameters of the controllers are discussed. Comparisons among a single robust controller, a multi-model controller and a gain-scheduled controller are studied. It is shown that the proposed gain-scheduled controller can achieve good performance at both low and high power levels.

  13. Control rod position detector for nuclear reactor

    International Nuclear Information System (INIS)

    Kudo, Mitsuru; Fujiwara, Hiroshi.

    1981-01-01

    Purpose: To improve the reliability of a control rod position detector by detecting a reactive code with a combination of control rod position change signals produced from vertical and horizontal axis decoders, generation an error signal and thus simultaneously detecting the operation of more than two lead switches. Constitution: Horizontal and vertical axis position signals responsive to changes in the control rod position are applied from lead switches connected in a predetermined matrix connection corresponding to the notches of the positions of respective position detecting probes, the reactive output from the decoder is detected by a reactive code detecting circuit, which in turn generates a fault signal, and the control rod position code converted in a notch number generating circuit is converted to a predetermined value indicating invalidity. Accordingly, a fault caused by the simultaneous operation of a plurality of failed lead switches can be effectively detected. (Yoshino, Y.)

  14. Modern insect control: Nuclear techniques and biotechnology

    International Nuclear Information System (INIS)

    1988-01-01

    The Symposium dealt primarily with genetic methods of insect control, including sterile insect technique (SIT), F 1 sterility, compound chromosomes, translocations and conditional lethals. Research and development activities on various aspects of these control technologies were reported by participants during the Symposium. Of particular interest was development of F 1 sterility as a practical method of controlling pest Lepidoptera. Genetic methods of insect control are applicable only on an area wide basis. They are species specific and thus do not reduce populations of beneficial insects or cause other environmental problems. Other papers presented reported on the potential use of radiation as a quarantine treatment for commodities in international trade and the use of radioisotopes as ''tags'' in studying insects

  15. Mechanical suitability of glycerol-preserved human dura mater for construction of prosthetic cardiac valves.

    Science.gov (United States)

    McGarvey, K A; Lee, J M; Boughner, D R

    1984-03-01

    We have examined the tensile viscoelastic properties of fresh and glycerol-preserved human dura mater, and correlated the results with structural information from the scanning electron microscope. The interwoven laminar structure of dura produces rather high flexural stiffness, while the crossed-fibrillar laminae produce planar mechanical isotropy. Glycerol storage shifts the stress-strain curve to lower strain, reduces stress relaxation and creep, and lowers the ultimate tensile strength and strain at fracture. These changes may be due to glyceraldehyde crosslinking, or to increased interfibrillar friction. The latter hypothesis suggests that glycerol storage may reduce the fatigue lifetime of the tissue.

  16. Tumefactive immunoglobulin G4-related disease involving the dura mater: A case report and literature review

    International Nuclear Information System (INIS)

    Lee, Jeong Hoon; Lee, Ji Hoon; Ko, Yong; Paik, Seoung Sam; Lee, Young Jun; Park, Dong Woo

    2015-01-01

    Immunoglobulin G4 (IgG4)-related disease is a well-known disorder characterized by an inflammatory reaction with an increase in the number of IgG4-positive plasma cells associated with sclerosis. IgG4-related disease often affects the dura mater with a pattern of diffuse thickening when the central nervous system is involved. However, some nodular dural thickening requires discrimination from tumors because of obviously different treatment options. We report of a case of IgG4-related disease with tumefactive dural involvement

  17. Control rooms in German nuclear power plants

    International Nuclear Information System (INIS)

    Hoffmann, E.

    1999-01-01

    The paper explains and illustrates the dissimilarity in design and equipment of control rooms in German NPPs, as well as a historical survey of the general principles and approaches applied in the evolution of control room technology, including backfitting activities. Experience obtained from daily operation as well training at the simulators is taken as a basis to formulate fundamental requirements for modification or novel design approaches. (orig./CB) [de

  18. Nuclear reactor internals with control elements guides

    International Nuclear Information System (INIS)

    Baujat, J.; Chevereau, G.

    1991-01-01

    The internals have a lower plate, a superior plate, support columns and guide tubes for the control rods displacements. The lower section of the control rod guide tube have a base that fits into a bevelled seat in the lower plate. The guide tube is held into the seat by a spring, compressed between the base of the upper section of the tube and the lower plate

  19. Recent control and instrumentation systems for BWR nuclear power plant

    International Nuclear Information System (INIS)

    Fujii, Hiroaki; Higashikawa, Yuichi; Sato, Hideyuki

    1990-01-01

    For the needs of the more stable operation of nuclear power stations, the upgrading of the measurement and control system for BWRs has been promoted by positively introducing remarkably advancing electronic technology. Further, it is aimed at to construct the synthetic digitized measurement and control system for nuclear power stations to heighten the operation reliability in ABWRs. As the first step of the development in the synthetic digitization, the monitoring and control system for radioactive waste treatment was put in practical use for No.5 plant of Kashiwazaki, Kariwa Nuclear Power Station, Tokyo Electric Power Co., Inc. Hitachi Ltd. has promoted the development and the application to actual plants of the measurement and control system for BWRs, in which digital control technology, optical information transmission technology and the operation-supporting technology using a computer were utilized. Hereafter, it is intended to expand the application of digital measurement and control aiming at improving the reliability, operation performance and maintainability. The nuclear power plant control complex with advanced man-machine interface-90 (NUCAMM-90) was developed, and its application to actual plants is planned. (K.I.)

  20. Mutual control of X-rays and nuclear transitions

    Energy Technology Data Exchange (ETDEWEB)

    Gunst, Jonas Friedrich

    2015-12-14

    In the course of this Thesis the mutual control between X-rays and nuclear transitions is investigated theoretically. In the first Part, we study the nuclear photoexcitation with the highly brilliant and coherent X-ray free-electron lasers (XFELs). Apart from amplifying the direct resonant interaction with nuclear transitions, the super-intense XFEL can produce new states of matter like cold, high-density plasmas where secondary nuclear excitation channels may come into play, e.g., nuclear excitation by electron capture (NEEC). Our results predict that in the case of {sup 57}Fe targets secondary NEEC can be safely neglected, whereas it is surprisingly the dominating contribution (in comparison to the direct photoexcitation) for the XFEL-induced {sup 93m}Mo isomer triggering. Based on these case studies, we elaborate a general set of criteria to identify the prevailing excitation channel for a certain nuclear isotope. These criteria may be most relevant for future nuclear resonance experiments at XFEL facilities. On the opposite frontier, the interplay between single X-ray photons and nuclear transitions offer potential storage and processing applications for information science in their most compact form. In the second Part of this Thesis, we show that nuclear forward scattering off {sup 57}Fe targets can be employed to process polarization-encoded single X-rays via timed magnetic field rotations. Apart from the realization of logical gates with X-rays, the polarization encoding is used to design an X-ray quantum eraser scheme where the interference between scattering paths can be switched off and on in a controlled manner. Such setups may advance time-energy complementarity tests to so far unexplored parameter regimes, e.g., to the domain of X-ray quanta.

  1. New technology in nuclear power plant instrumentation and control

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The primary topic of this book is what can be done to improve nuclear power plant operation safety and the economic benefits that can be gained with the utilization of advance instrumentation and control technology. Other topics discussed are the industry's reluctance to accept new designs determining cost effective improvements, and difficulties in meeting regulatory standards with new technology control. The subjects will be useful when considering the area of instrumentation and control for enhancing plant operation and safety. Contents: Advanced Instrumention, Plant Control and Monitoring, Plant Diagnostics and Failure Detection, Human Factors Considerations in Instrumentation and Control, NRC and Industry Perspective on Advanced Instrumentation and Control

  2. A new control strategy for nuclear power reactors

    International Nuclear Information System (INIS)

    Wakabayashi, H.; Sasaki, K.; Takegaki, M.

    1990-01-01

    A new automatic direct digital control strategy for nuclear power reactors is presented. It is based on a simple control logic of comparison between the available time (the time for the error signal to disappear) and the required time (the time for the time derivative to match that of the target trend). The method aims to control the system to an acceptable state within a minimum time under a number of restraints. The control capability of the method is shown for two typical transients. This method is generally applicable to process control in which time-optimal control based on the maximum principle is sought

  3. Use of hafnium in control bars of nuclear reactors; Uso de hafnio en barras de control de reactores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez S, J.R.; Alonso V, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jrrs@nuclear.inin-mx

    2003-07-01

    Recently the use of hafnium as neutron absorber material in nuclear reactors has been reason of investigation by virtue of that this material has nuclear properties as to the neutrons absorption and structural that can prolong the useful life of the control mechanisms of the nuclear reactors. In this work some of those more significant hafnium properties are presented like nuclear material. Also there are presented calculations carried out with the HELIOS code for fuel cells of uranium oxide and of uranium and plutonium mixed oxides under controlled conditions with conventional bars of boron carbide and also with similar bars to which are substituted the absorbent material by metallic hafnium, the results are presented in this work. (Author)

  4. Modern control technology for improved nuclear reactor performance

    International Nuclear Information System (INIS)

    Oakes, L.C.

    1986-01-01

    One of the main complaints leveled at reactor control systems by utility spokesmen is complexity. One only has to look inside a power reactor control room to appreciate this viewpoint. The high reliability and versatility of modern microprocessors makes possible distributed control systems with only performance data and abnormal conditions being relayed to the control room. In a sense, this emulates the human-body control system where routine repetitive actions are handled in an involuntary manner. The significance of expert systems to the nuclear reactor control and safety systems is their ability to capture human and other expertise and make it available, upon demand, and under almost all circumstances. Thus, human problem-solving skills acquired by the learning process over a long period of time can be captured and employed with the reliability inherent in computers. This is especially important in nuclear plants when human operators are burdened by stress and emotional factors that have a dramatic effect on performance level

  5. A framework for the intelligent control of nuclear rockets

    International Nuclear Information System (INIS)

    Parlos, A.G.; Metzger, J.D.

    1993-01-01

    An intelligent control system architecture is proposed for nuclear rockets, and its various components are briefly described. The objective of the intelligent controller is the satisfaction of performance, robustness, fault-tolerance and reliability design specifications. The proposed hierarchical architecture consists of three levels: hardware, signal processing, and knowledge processing. The functionality of the intelligent controller is implemented utilizing advanced information processing technologies such as artificial neutral networks and fuzzy expert systems. The feasibility of a number of the controller architecture components have been independently validated using computer simulations. Preliminary results are presented demonstrating some of the signal processing capabilities of the intelligent nuclear rocket controller. Further work, currently in progress, is attempting to implement a number of the knowledge processing capabilities of the controller and their interface with the lower levels of the proposed architecture

  6. Transcending sovereignty. In the management and control of nuclear material

    International Nuclear Information System (INIS)

    Scheinman, Lawrence

    2001-01-01

    Effective control of nuclear material is fundamentally important to the credibility and reliability of the nuclear non-proliferation regime. Under the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), international safeguards are applied to non-nuclear- weapon State Parties for the purpose of verifying compliance with their undertakings not to seek to acquire nuclear weapons or explosive devices by assuring that safeguarded nuclear activities and material are not diverted from their intended peaceful use. Reflecting the sovereign State basis upon which the international system rests, the control and protection of nuclear materials within the State are the responsibility of the national authority. This division of responsibility between international verification of non-diversion on the one hand and national responsibility for material protection on the other has worked quite well over time. But it has not created a seamless web of fully effective control over nuclear material. 34 In so far as safeguards are concerned, six points are to be made: 1. INFCIRC/153 Agreements: Completion by all NPT Parties of the required safeguards agreements with the IAEA. Fifty States Party to the NPT still have not entered into treaty-obligated safeguards agreements with the IAEA. 2. Adherence by all States having full-scope safeguards INFCIRC/540. As noted, very few States have thus far negotiated and implemented the strengthened safeguards arrangements. 3. United Nations Security Council action to take its 1992 assertions (related to compliance and enforcement) on proliferation and safeguards a step further. 4. Non-NPT Party support for international Safeguards. 5. Safeguards financing. 6. IAEA Access to export license information

  7. Emergency facility control device for nuclear reactor

    International Nuclear Information System (INIS)

    Ikehara, Morihiko.

    1981-01-01

    Purpose: To increase the reliability of a nuclear reactor by allowing an emergency facility to be manually started and stopped to make its operation more convenient and eliminate the possibility of erroneous operation in an emergency. Constitution: There are provided a first water level detector for detecting a level lower than the first low water level in a reactor container and a second water level detector for detecting a level lower than the second low water level lower than the first low water level, and an emergency facility can be started and stopped manually only when the level is higher than the second low water level, but the facility will be started regardless of the state of the manual operation when the level is lower than the second low water level. Thus, the emergency facility can be started by manual operation, but will be automatically started so as to secure the necessary minimum operation if the level becomes lower than the second low water level and the stopping operation thereafter is forgotten. (Kamimura, M.)

  8. Angra nuclear plant - environmental control program

    International Nuclear Information System (INIS)

    Kircher, E.; Cruz, E.S. da

    1989-01-01

    The pre-operational studies, that were elaborated before the beginning of Angra I Power Plant operation, are described in particular the environmental radiological safety area till the fuel loading in the core reactor. Several aspects are included, as socio-economic survey, seismological analysis, Meteorological Program, marine biology, water cooling system, exposure measures of natural radiation, marine sediments characterization in the effluent dispersion area and Environmental Radiological Monitoring Program. The main environmental programs developed for the operational phase of the Angra I Plant are also presented, citing some considerations about the Meteorological Program, Marine Biology Control Program, Temperature and Chlorine Control in Piraquara de Fora Bay, Radiological Environmental Monitoring Program, Sanitary Effluent Control Program and Radiological Emergency Program. (C.G.C.). 2 refs

  9. Control rod drives for nuclear reactors

    International Nuclear Information System (INIS)

    Okada, Shige.

    1981-01-01

    Purpose: To enable the detection for the raptures of the bellows in control rod drives in LMFBR type reactor, by recycling seal gases inside the bellows and measuring the radioactivity in the recycling passage. Constitution: In the control drives, outer extension pipe is surrounded by the bellows, which is put between the cylindrical biological shieldings around the upper potion of an upper guide tube and the disk-like seal members provided at the lower flange of the outer extension pipe. Thus, the inside device of control rod is isolated from the coolants and the cover gases. The outer extension pipe is provided with a suction channel and a return channel. These channels are connected to a seal gas recycling pipeway, a pump and a radioactivity detector, where the seal gases in the bellows is recycling. If failures should occur in the bellows, cover gas leaks into the seal gas and recycles, whereby radioactivity is detected and alarmed. (J.P.N.)

  10. WTEC panel report on European nuclear instrumentation and controls

    International Nuclear Information System (INIS)

    White, J.D.; Lanning, D.D.; Johnson, P.M.H.

    1991-12-01

    A study of instrumentation and controls (I and C) technology used in nuclear power plants in Europe was conducted by a panel of US specialists. This study plants in Europe was conducted by a panel of US specialists. This study included a review of the literature on the subject, followed by a visit to some of the leading organizations in Europe in the field nuclear I and C. Areas covered are: (1) role of the operator and control room design; (2) transition from analog to digital technology; (3) computerized operator support systems for fault management; (4) control strategies and techniques; (5) Nuclear power plant I and C architecture; (6) instrumentation and (7) computer standards and tools. The finding relate to poor reactions

  11. Development of Nuclear Control and Management Information Treatment System

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, J. G.; Lee, B. D.; So, D. S. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2007-07-01

    To implement obligations under the Non-Proliferation Treaty (NPT) and the bilateral agreements more effectively, we proposed a computerized system named the Nuclear Control and Management Information Treatment System (NCAMITS) as a part of the Nuclear Transparency Enhancement Project at the Korea Atomic Energy Research Institute (KAERI). The database system is designed not only to undertake the facility-level accounting for and control of nuclear material at KAERI, but also to meet the requirements of the State (National) System of Accounting and Control (SSAC). Since the NCAMITS will provide services for the facility operators as well as the safeguard information managers at KAERI, the development of the system is supposed to accommodate the end-user's convenience and the manager's sophisticated specifications as well.

  12. Analysis and design of a nuclear boiler control scheme

    International Nuclear Information System (INIS)

    Hughes, F.M.

    1982-01-01

    The steam raising plant of a British designed nuclear power station for which the installed control scheme has given rise to performance and stability problems is considered. The lecture is based on studies carried out for the plant which illustrate the way in which multivariable frequency response methods can be used to analyse and identify the source of control problems and further enable alternative control schemes, having improved performance, to be designed. (author)

  13. Fuzzy model-based control of a nuclear reactor

    International Nuclear Information System (INIS)

    Van Den Durpel, L.; Ruan, D.

    1994-01-01

    The fuzzy model-based control of a nuclear power reactor is an emerging research topic world-wide. SCK-CEN is dealing with this research in a preliminary stage, including two aspects, namely fuzzy control and fuzzy modelling. The aim is to combine both methodologies in contrast to conventional model-based PID control techniques, and to state advantages of including fuzzy parameters as safety and operator feedback. This paper summarizes the general scheme of this new research project

  14. Application of programmable logic controller in nuclear experiments

    International Nuclear Information System (INIS)

    Ponikvar, D.

    1991-09-01

    The applicability of programmable logic controller (PLC) in nuclear experiments was studied on an example that simulated the monitoring and control of an ion beam in an accelerator. Using infrared and laser light, a comparison was made between the complexity and suitability of PLC compared to a setup using a personal computer. The experiments are described in detail. The routines for registration of signals from appropriate sensors and for control of the stepper monitor were written in quick BASIC. (author). 5 figs

  15. Application of robust fuzzy control in power control of nuclear reactor

    International Nuclear Information System (INIS)

    Liu Lei; Luan Xiuchun; Jin Guangyuan; Yu Tao; Rao Su

    2013-01-01

    Robust-fuzzy controller based on T-S fuzzy model was designed for real-time controlling of nuclear reactor power and adapting to the load changing of power grid. Local controller was designed by means of state feedback technique, and the global controller was designed by parallel distributed compensation (PDC) method. The result of solving linear matrix inequalities (LMI) proves that this controller is stable. The simulation shows that the nuclear power can be well controlled in three typical conditions by this controller. (authors)

  16. Nuclear safety. ICFTU proposals for the international control of the nuclear energy industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-07-01

    are strong proponents of its use and others have said that they are only prepared to accept its application if safety controls are substantially improved. All affiliates of the ICFTU are convinced that energy policy options must be widened through increased research and development of new and renewable sources and through extensive energy conservation measures. The environmental impact of all methods of energy generation must be assessed on the basis of the public availability of all relevant information. It is in this context, that whatever their views about the desirability or otherwise of nuclear power, all ICFTU affiliates recognise the immediate need to assure the highest possible level of safety for all nuclear plants and activities everywhere - for example to deal with radioactive wastes created over the last 30 years. Even if some countries opt out of nuclear power it is likely that many others will be committed to it for many years. Given the widespread effects of a catastrophic failure anywhere in the world we must therefore all be concerned to strengthen the international safety regime. Because of their historic role in campaigning for health and safety at work, unions are well placed to exercise an independent watchdog role - making use of the knowledge and skills of their members in the nuclear industry - and are also able to speak on behalf of a large membership which is representative representative of the wide public concern about nuclear safety. Immediately following the Chernobyl disaster, the ICFTU Executive Board adopted a resolution (reproduced as Appendix 2 to this document) calling for immediate steps to tighten up nuclear safety. In the light of subsequent developments, the Confederation has now given further detailed consideration to the whole question of nuclear safety and has decided to publish this report which contains detailed proposals for tighter international control of nuclear energy via the International Atomic Energy Agency (IAEA

  17. Nuclear safety. ICFTU proposals for the international control of the nuclear energy industry

    International Nuclear Information System (INIS)

    1989-01-01

    are strong proponents of its use and others have said that they are only prepared to accept its application if safety controls are substantially improved. All affiliates of the ICFTU are convinced that energy policy options must be widened through increased research and development of new and renewable sources and through extensive energy conservation measures. The environmental impact of all methods of energy generation must be assessed on the basis of the public availability of all relevant information. It is in this context, that whatever their views about the desirability or otherwise of nuclear power, all ICFTU affiliates recognise the immediate need to assure the highest possible level of safety for all nuclear plants and activities everywhere - for example to deal with radioactive wastes created over the last 30 years. Even if some countries opt out of nuclear power it is likely that many others will be committed to it for many years. Given the widespread effects of a catastrophic failure anywhere in the world we must therefore all be concerned to strengthen the international safety regime. Because of their historic role in campaigning for health and safety at work, unions are well placed to exercise an independent watchdog role - making use of the knowledge and skills of their members in the nuclear industry - and are also able to speak on behalf of a large membership which is representative representative of the wide public concern about nuclear safety. Immediately following the Chernobyl disaster, the ICFTU Executive Board adopted a resolution (reproduced as Appendix 2 to this document) calling for immediate steps to tighten up nuclear safety. In the light of subsequent developments, the Confederation has now given further detailed consideration to the whole question of nuclear safety and has decided to publish this report which contains detailed proposals for tighter international control of nuclear energy via the International Atomic Energy Agency (IAEA

  18. Nuclear Material Control and Accountability System Effectiveness Tool (MSET)

    International Nuclear Information System (INIS)

    Powell, Danny H.; Elwood, Robert H. Jr.; Roche, Charles T.; Campbell, Billy J.; Hammond, Glenn A.; Meppen, Bruce W.; Brown, Richard F.

    2011-01-01

    A nuclear material control and accountability (MC and A) system effectiveness tool (MSET) has been developed in the United States for use in evaluating material protection, control, and accountability (MPC and A) systems in nuclear facilities. The project was commissioned by the National Nuclear Security Administration's Office of International Material Protection and Cooperation. MSET was developed by personnel with experience spanning more than six decades in both the U.S. and international nuclear programs and with experience in probabilistic risk assessment (PRA) in the nuclear power industry. MSET offers significant potential benefits for improving nuclear safeguards and security in any nation with a nuclear program. MSET provides a design basis for developing an MC and A system at a nuclear facility that functions to protect against insider theft or diversion of nuclear materials. MSET analyzes the system and identifies several risk importance factors that show where sustainability is essential for optimal performance and where performance degradation has the greatest impact on total system risk. MSET contains five major components: (1) A functional model that shows how to design, build, implement, and operate a robust nuclear MC and A system (2) A fault tree of the operating MC and A system that adapts PRA methodology to analyze system effectiveness and give a relative risk of failure assessment of the system (3) A questionnaire used to document the facility's current MPC and A system (provides data to evaluate the quality of the system and the level of performance of each basic task performed throughout the material balance area (MBA)) (4) A formal process of applying expert judgment to convert the facility questionnaire data into numeric values representing the performance level of each basic event for use in the fault tree risk assessment calculations (5) PRA software that performs the fault tree risk assessment calculations and produces risk importance

  19. A nuclear reactor with buffered control rods

    International Nuclear Information System (INIS)

    Bevilacqua, F.

    1974-01-01

    The control rods for, e.g., water-cooled reactors are fastened as units on common crossbars in vertical downward direction. The fastening on the crossbar is achieved by means of cross-shaped parts, e.g., in the shape of a double 'H'. A cylinder connected with a drive rod in normal operation is joined to each of the crossbars. In an emergency shut-down, this connection is interrupted and the control rod unit drops into the core through the action of gravity. Its fall is slowed down by a cushion or shock absorbing unit. For this purpose a piston is provided mounted on the supporting plate below the cylinder and guided within it. In the cylinder, the coolant is contained as damping medium. An upper opening in the cylinder serves as a ventilation hole. The movement of the piston is limited by a stopping part within the cylinder and slowed down by a spiral spring. (DG) [de

  20. Control unit of a nuclear reactor

    International Nuclear Information System (INIS)

    Desfontaines, Guy; Le Helloco, Michel.

    1981-01-01

    Control unit comprising multiple leak-tight vessels, in communication with the inside of the reactor vessel, extending this vessel above its cover, in the vertical direction and each one enclosing a mechanism for moving a cluster of material absorbing the neutrons in the reactor core, actuated by a motor. This control unit is of reduced height above the vessel cover and provides efficient protection of the leak tight containments and the mechanisms in the event of earthquakes, easy removal and refitting of the vessel cover, good ventilation of the power devices of the mechanisms without the use of a complex ventilation system, efficient thermal insulation of the leak-tight containments assembly, as well as easy access to the motors and mechanism located in the leak-tight containment for carrying out any maintenance and repairs that might be required [fr

  1. Nuclear Instrumentation and Control Cyber Testbed Considerations – Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Jonathan Gray; Robert Anderson; Julio G. Rodriguez; Cheol-Kwon Lee

    2014-08-01

    Abstract: Identifying and understanding digital instrumentation and control (I&C) cyber vulnerabilities within nuclear power plants and other nuclear facilities, is critical if nation states desire to operate nuclear facilities safely, reliably, and securely. In order to demonstrate objective evidence that cyber vulnerabilities have been adequately identified and mitigated, a testbed representing a facility’s critical nuclear equipment must be replicated. Idaho National Laboratory (INL) has built and operated similar testbeds for common critical infrastructure I&C for over ten years. This experience developing, operating, and maintaining an I&C testbed in support of research identifying cyber vulnerabilities has led the Korean Atomic Energy Research Institute of the Republic of Korea to solicit the experiences of INL to help mitigate problems early in the design, development, operation, and maintenance of a similar testbed. The following information will discuss I&C testbed lessons learned and the impact of these experiences to KAERI.

  2. Nuclear Instrumentation and Control Cyber Testbed Considerations - Lessons Learned

    International Nuclear Information System (INIS)

    Jonathan, Peter Grey; Robert, S Anderson; Julio, G Rodriguez; Lee, Cheol Kwon

    2014-01-01

    Identifying and understanding digital instrumentation and control (I and C) cyber vulnerabilities within nuclear power plants and other nuclear facilities is critical if nation states desire to operate nuclear facilities safely, reliably, and securely. To demonstrate objective evidence that cyber vulnerabilities have been adequately identified and mitigated, a test bed representing a facility's critical nuclear equipment must be replicated. Idaho National Laboratory (INL) has built and operated similar test beds for common critical infrastructure I and C for over 10 years. This experience developing, operating, and maintaining an I and C test bed in support of research identifying cyber vulnerabilities has led the Korean Atomic Energy Research Institute of the Republic of Korea to solicit the experiences of INL to help mitigate problems early in the design, development, operation, and maintenance of a similar test bed. The following information will discuss I and C test bed lessons learned and the impact of these experiences to KAERI

  3. Ultrastructure of the extracellular matrix of bovine dura mater, optic nerve sheath and sclera.

    Science.gov (United States)

    Raspanti, M; Marchini, M; Della Pasqua, V; Strocchi, R; Ruggeri, A

    1992-10-01

    The sclera, the outermost sheath of the optic nerve and the dura mater have been investigated histologically and ultrastructurally. Although these tissues appear very similar under the light microscope, being dense connective tissues mainly composed of collagen bundles and a limited amount of cells and elastic fibres, they exhibit subtle differences on electron microscopy. In the dura and sclera collagen appears in the form of large, nonuniform fibrils, similar to those commonly found in tendons, while in the optic nerve sheath the fibrils appear smaller and uniform, similar to those commonly observed in reticular tissues, vessel walls and skin. Freeze-fracture also reveals these fibrils to have different subfibrillar architectures, straight or helical, which correspond to 2 distinct forms of collagen fibril previously described (Raspanti et al. 1989). The other extracellular matrix components also vary with the particular collagen fibril structure. Despite their common embryological derivation, the dura mater, optic nerve sheath and sclera exhibit diversification of their extracellular matrix consistent with the mechanical loads to which these tissues are subjected. Our observations indicate that the outermost sheath of the optic nerve resembles the epineurium of peripheral nerves rather than the dura to which it is commonly likened.

  4. Immunohistochemical profile of neurotrophins in human cranial dura mater and meningiomas.

    Science.gov (United States)

    Artico, Marco; Bronzetti, Elena; Pompili, Elena; Ionta, Brunella; Alicino, Valentina; D'Ambrosio, Anna; Santoro, Antonio; Pastore, Francesco S; Elenkov, Ilia; Fumagalli, Lorenzo

    2009-06-01

    The immunohistochemical profile of neurotrophins and their receptors in the human cranial dura mater was studied by examining certain dural zones in specimens harvested from different regions (frontal, temporal, parietal and occipital). Dural specimens were obtained during neurosurgical operations performed in ten patients for surgical treatment of intracranial lesions (meningiomas, traumas, gliomas, vascular malformations). The dural fragments were taken from the area of the craniotomy at least 8 cm from the lesion as well as from the area in which the meningioma had its dural attachment. Immunohistochemical characterization and distribution of neurotrophins, with their receptors, were analyzed. The concrete role played by these neurotrophic factors in general regulation, vascular permeability, algic responsivity and release of locally active substances in the human dura mater is still controversial. Our study revealed a general structural alteration of dural tissue due to the invasivity of meningiomatous lesions, together with an improved expression of brain derived neurotrophic factor (BDNF) in highly proliferating neoplastic cells and an evident production of nerve growth factor (NGF) in inflammatory cells, suggesting that BDNF has a role in supporting the proliferation rate of neoplastic cells, while NGF is involved in the activation of a chronic inflammatory response in neoplastic areas.

  5. Gestão do Capital Humano: comparação na localização de software de gestão do capital humano entre os países Brasil, Argentina e MéxicoHuman Capital Management: comparison in the location of softwares of human capital management among the countries Brazil, Argentina and MexicoGestión del Capital Humano: una comparación entre Brasil, Argentina y México con respecto a la localización del software de gestión del capital humano

    Directory of Open Access Journals (Sweden)

    DIAS, Dilson

    2009-12-01

    Full Text Available RESUMOA área de administração de pessoal iniciou, dentro das organizações, um processo que hoje é o grande foco dos investimentos na busca da competitividade de mercado, tão acirrada em tempos de forte globalização, que é a gestão do capital humano. Há algum tempo, as organizações já perceberam que o diferencial para ser competitivo não está no que se produz e sim nas pessoas que tornam tal processo uma realidade. Como se vive atualmente a era do conhecimento, os softwares de gestão do capital humano vieram para potencializar a gestão desses recursos humanos, tornando mais ágil o processo de disseminação. Tanto quanto a veloz expansão dos softwares, as empresas se estenderam para diversas regiões do planeta, o que gera a demanda de ter um software adequado às convenções locais, seja ele localizado ou não. A localização de software é uma área de estudos recentes, mas já conta com investimentos em centros de pesquisas por parte de transnacionais. Como objetivo geral da presente pesquisa, buscou-se comparar as principais informações pertinentes à área de administração de pessoal entre Brasil, Argentina e México, para a Localização de um software de gestão do capital humano, e dessa formar e inspirar outros pesquisadores a explorarem este assunto em outras áreas da Administração. A pesquisa utilizou o método comparativo. Quanto aos objetivos pode ser classificada como descritiva e exploratória; quanto aos procedimentos pode ser classificada como bibliográfica e documental; e quanto à abordagem do problema, pode ser classificada como quantitativa e qualitativa. Foram aplicados questionários estruturados em empresas da Argentina e do México, e a análise dos resultados permitiu que fosse possível identificar quais são as áreas de atuação de maior aderência nesses países, e principalmente quais são as informações de maior e menor aderência para a localização dos softwares brasileiros. O

  6. Intelligent control system Cellular Robotics Approach to Nuclear Plant control and maintenance

    International Nuclear Information System (INIS)

    Fukuda, Toshio; Sekiyama, Kousuke; Xue Guoqing; Ueyama, Tsuyoshi.

    1994-01-01

    This paper presents the concept of Cellular Robotic System (CEBOT) and describe the strategy of a distributed sensing, control and planning as a Cellular Robotics Approach to the Nuclear Plant control and maintenance. Decentralized System is effective in large plant and The CEBOT possesses desirable features for realization of Nuclear Plant control and maintenance because of its flexibility and adaptability. Also, as related on going research work, self-organizing manipulator and communication issues are mentioned. (author)

  7. Design of a Load Following Controller for APR+ Nuclear Plants

    International Nuclear Information System (INIS)

    Lee, Sim Won; Kim, Jae Hwan; Kim, Dong Su; Na, Man Gyun; Yu, Keuk Jong

    2011-01-01

    The load-following operation of an APR+ nuclear plants is required to restrain the adjustment of boric acid concentration and to efficiently control the control rods for the flexibility of the operation. Especially, axial flux distribution disproportion that is usually caused by load-following operation in a reactor core induces xenon oscillation because the absorption cross-section of xenon is extremely large and its effects in a reactor are delayed by the iodine precursor. Rapid and smooth power maneuvering has its benefits in view of the economical and safe operation of reactors, so it is required that the controller is efficiently designed. Therefore, the load-following operation of an APR+ nuclear plants needs the ultimate automatic control and the advanced control method that satisfies the conditions such as the flexibility, safety and convenience. A model predictive control (MPC) method is applied to design an automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control for an APR+ nuclear plants. Some tracking controllers use only the current tracking command. On the other hand, since MPC considers future commands in addition to the current tracking command, the MPC can achieve better tracking performance. Therefore, the MPC has been applied very much to the control of industrial process systems. The basic concept of the MPC is to solve an optimization problem for generating finite future control inputs at current time and to implement as the current control input only the first control input among the solutions of the finite time steps. At the next time step, the second control input is not implemented and the procedure to solve the optimization problem is then repeated. The power level and the ASI are controlled by the regulating control banks and part-strength control banks together with the automatic adjustment of boric acid concentration. The 3-dimensional MASTER code, which models the APR+ nuclear

  8. Design of a Load Following Controller for APR+ Nuclear Plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sim Won; Kim, Jae Hwan; Kim, Dong Su; Na, Man Gyun [Chosun University, Gwnagju (Korea, Republic of); Yu, Keuk Jong [Korea Hydro and Nuclear Power Co., Daejeon (Korea, Republic of)

    2011-08-15

    The load-following operation of an APR+ nuclear plants is required to restrain the adjustment of boric acid concentration and to efficiently control the control rods for the flexibility of the operation. Especially, axial flux distribution disproportion that is usually caused by load-following operation in a reactor core induces xenon oscillation because the absorption cross-section of xenon is extremely large and its effects in a reactor are delayed by the iodine precursor. Rapid and smooth power maneuvering has its benefits in view of the economical and safe operation of reactors, so it is required that the controller is efficiently designed. Therefore, the load-following operation of an APR+ nuclear plants needs the ultimate automatic control and the advanced control method that satisfies the conditions such as the flexibility, safety and convenience. A model predictive control (MPC) method is applied to design an automatic load-following controller for the integrated thermal power level and axial shape index (ASI) control for an APR+ nuclear plants. Some tracking controllers use only the current tracking command. On the other hand, since MPC considers future commands in addition to the current tracking command, the MPC can achieve better tracking performance. Therefore, the MPC has been applied very much to the control of industrial process systems. The basic concept of the MPC is to solve an optimization problem for generating finite future control inputs at current time and to implement as the current control input only the first control input among the solutions of the finite time steps. At the next time step, the second control input is not implemented and the procedure to solve the optimization problem is then repeated. The power level and the ASI are controlled by the regulating control banks and part-strength control banks together with the automatic adjustment of boric acid concentration. The 3-dimensional MASTER code, which models the APR+ nuclear

  9. Distributed control system for CANDU 9 nuclear power plant

    International Nuclear Information System (INIS)

    Harber, J.E.; Kattan, M.K.; Macbeth, M.J.

    1996-01-01

    Canadian designed CANDU pressurized heavy water nuclear reactors have been world leaders in electrical power generation. The CANDU 9 project is AECL's next reactor design. The CANDU 9 plant monitoring, annunciation, and control functions are implemented in two evolutionary systems; the distributed control system (DCS) and the plant display system (PDS). The CDS implements most of the plant control functions in a single hardware platform. The DCS communicates with the PDS to provide the main operator interface and annunciation capabilities of the previous control computer designs along with human interface enhancements required in a modern control system. (author)

  10. Control room habitability in Spanish Nuclear Power Plants

    International Nuclear Information System (INIS)

    Mediavilla, F.; Sierra, J. J.

    2007-01-01

    Since the NRC published in 2003 the Generic Letter 2003-01 Control room Habitability and the Regulatory guide 1.197 Demonstrating Control Room Envelope Integrity at Nuclear Power Reactors, where it is emphasized the importance of verifying the control room habitability by means of alternative methods, Spanish Nuclear Power Plants are undertaking the different necessary activities to fulfill the requirements of the regulatory commission. This paper describes the main mechanisms included in NEI 99-03 Nuclear Energy Institute publication Control room Habitability Assessment guidance, to demonstrate and maintain Control room Habitability. In addition, in this article it Ds shown the theoretical principle of the test used to quantify air in-leakage in a control room envelope by using tracer gas techniques. The necessary activities to perform the initial in leakage testing are also put forward. Since 2006 Tecnatom, S. A. has performed the baseline testing in four Spanish Units, all of them with successful results. The rest of the Plants are scheduled to perform the tests during the second half of this year. Finally, this document summarises the more important aspects to be taken into account in the development of control room Habitability Programs, which are expected to ensure the integral maintenance of the Control room Envelope during the life a plant. (Author)

  11. MATER - Pianeta Terra-Mare: an interactive and multidisciplinary approach to Geosphere sciences

    Science.gov (United States)

    Piangiamore, Giovanna Lucia; Fanelli, Emanuela; Furia, Stefania; Garau, Daniela; Merlino, Silvia; Musacchio, Gemma; Carla Centineo, Maria

    2016-04-01

    Recent studies demonstrate that Earth and Marine Sciences are not properly treated in scholastic programs and in textbooks are included in a superficial way. These topics are interdisciplinary and experimental (biology, ecology, oceanography and geology) and the recent advance in these fields is strictly linked to technologic improvement. School cannot keep up with the huge advances of knowledge experimented in the last 20 years, also for the lack of didactic laboratories sufficiently updated to support experimental activities. In this context, in 2014-15 three Italian Research Institutes (INGV, ISMAR-CNR and ENEA-CRAM) have decided to support the Unified School District "ISA 10"of Lerici (Liguria, Italy) - comprehensive of kindergartner, primary and middle schools - to develop the project MATER - Pianeta Terra-Mare (Planet Earth and Sea). The acronym MATER (MARe and TERra) has also a gender value, as people involved in the projects were women, mostly researchers and teachers, which have worked side by side with other women belonging to environmental and cultural associations of the territory. This heterogeneous group has a common objective: to promote the diffusion of a scientific culture and to sensitize students from 3 to 14 years towards problems occurring in marine and terrestrial environments, fostering the settlement of a sustainable attitude to the exploitation of natural resources and consciousness to natural hazards, such as earthquakes and floods, quite common in the Ligurian region. MATER has been considered as one of the best projects funded by MIUR (Italian Ministry of Education, University and Research) inside the Dissemination of Scientific and Technological Culture call for the year 2014. Natural hazards (Planet Earth) and the chemical-physical aspects and resources of the marine environment (Planet Sea) were the two modules of the project. Planet Earth developed through Piovono Idee! (Cloudy with a chance of Ideas!), an interactive exhibition on

  12. The developmental origin of adolescent alcohol use: findings from the Mater University Study of Pregnancy and its outcomes.

    Science.gov (United States)

    Alati, Rosa; Clavarino, Alexandra; Najman, Jake M; O'Callaghan, Michael; Bor, William; Mamun, Abdullah Al; Williams, Gail M

    2008-11-01

    It is unclear whether fetal alcohol exposure contributes to alcohol use in adolescence. In this study, we examine the association between maternal alcohol use in pregnancy and adolescents' drinking patterns at age 14. The association of maternal alcohol exposure with early drinking was examined in 4363 adolescents taking part to the Mater University Study of Pregnancy (MUSP) and its outcomes, a population based birth cohort study commenced in Brisbane (Australia) in 1981. Mothers and children were followed up at birth, 5 and 14 years after the initial interview. Maternal alcohol use was assessed before and during pregnancy and at the 5 years follow-up. Adolescents' alcohol use was assessed at child age 14. In multivariable analysis those born of mothers who consumed 3+ glasses during pregnancy were at increased risk to report drinking 3+ glasses compared with those whose mothers reported no drinking or drinking up to 2 glasses. Comparisons controlling for drinking before pregnancy and at age 5 found the averaged odds ratio of maternal drinking in pregnancy on risk of reporting alcohol consumption of 3 and more glasses at age 14 was 2.74 (CI 1.70, 4.22). Our study suggests that they maybe a biological origin of early drinking. Further studies are needed to better disentangle the nature of the association and the role of other possible confounding factors.

  13. Apparatus for controlling nuclear core debris

    International Nuclear Information System (INIS)

    Jones, R.D.

    1978-01-01

    Disclosed is an apparatus for containing, cooling, and dispersing reactor debris assumed to flow from the core area in the unlikely event of an accident causing core meltdown. The apparatus includes a plurality of horizontally disposed vertically spaced plates, having depressions to contain debris in controlled amounts, and a plurality of holes therein which provide natural circulation cooling and a path for debris to continue flowing downward to the plate beneath. The uppermost plates may also include generally vertical sections which form annular-like flow areas which assist the natural circulation cooling

  14. Dynamics and control of nuclear power plants

    International Nuclear Information System (INIS)

    Tomsic, M.; Mavko, B.; Aleksic, U.; Stritar, A.; Adrinek, R.

    1977-01-01

    A mathematical model of the power plant with a pressurized water reactor has been prepared and tested. The model is intended for a schematic simulator based on a digital computer. The results of the simulation run for various normal transients are in good agreement with literature data. Equipment for computer control of the experimental reactor TRIGA has been completed. The equipment includes two microcomputers and associated interface circuits. Presently, only data logging is performed. The analyses of random signals on the TRIGA reactor have been continued. Measurements of neutron flux, fuel temperature and cooling water duct have been performed

  15. Drive mechanism nuclear reactor control rod

    International Nuclear Information System (INIS)

    Brooks, J.G. Jr.; Maure, D.R.; Meijer, C.H.

    1978-01-01

    An improved method and apparatus for operating magnetic stepping-type mechanisms. The current flowing in the coils of magnetic stepping-type mechanisms of the kind, for instance, that are used in control-element drive mechanisms is sensed and used to monitor operation of the mechanism. Current waveforms that characterize the motion of the mechanism are used to trigger changes in drive voltage and to verify that the drive mechanism is operating properly. In addition, incipient failures are detected through the observation of differences between the observed waveform and waveforms that characterize proper operation

  16. Challenges for development and provision of metrological quality control tools in nuclear safeguards, nuclear forensics and nuclear security

    International Nuclear Information System (INIS)

    Aregbe, Y.; Richter, S.; Jakopic, R.; Bauwens, J.; Truyens, J.; Sturm, M.; Bujak, R.; Eykens, R.; Kehoe, F.; Kuehn, H.; Hennessy, C.

    2013-01-01

    Joint advancements in quality control tools and measurement sciences of international reference and safeguards laboratories include: -) successful integration of the Modified Total Evaporation technique (MTE) as a new tool for routine thermal ionization mass spectrometry in nuclear safeguards and security, -) research and feasibility studies for the development of new materials standard, particularly for nuclear forensics (Certified Reference Materials - CRMs for age-dating), -) quality control tools to support the additional protocol and nuclear security (particle CRMs, NUSIMEP (inter-laboratory comparisons for U particle analysis), and -) scientific/technical advice, training and knowledge transfer. The European Safeguards Research and Development Association (ESARDA), the Institute of Nuclear Materials Management (INMM) and the CETAMA Commission from the French Commission of Atomic Energy and Alternative Energies (CEA/CETAMA) and the International Atomic Energy Agency (IAEA) Technical Meetings are the platforms to exchange views on the needs and challenges for new Quality Control tools for nuclear safeguards and security. The paper is followed by the slides of the presentation

  17. Progress to a nuclear-weapon-free world through tactical nuclear arms control

    International Nuclear Information System (INIS)

    Matseiko, Youri

    1999-01-01

    At a time when, after some years of passivity, nuclear disarmament is becoming more of an urgent item on the international agenda and receiving accordingly more attention on the part of politicians and non-governmental experts. This is partly reflected in the Report of the Canberra Commission, and the statement on nuclear weapons by international generals and admirals. At the same time some developments such as uncertainties with START II ratification and the process of NATO enlargement make the task of nuclear arms control even more demanding. What is needed now is to pursue at last without any further delay negotiations on effective measures relating to the cessation of the nuclear arms race and to nuclear disarmament. And these effective measures must include both strategic and tactical nuclear weapons. Only a sustained commitment at the highest political level will legitimate serious discussions of the elimination option and ensure that resources and personnel are devoted to finding solutions to the problems associated with moving to zero, and to crafting appropriate transition strategies. In the absence of such a commitment, the nations of the world may never reach the point at which the desirability and feasibility of a nuclear-free world can be evaluated with greater certainty. This Pugwash Conference is trying to make a modest contribution in helping to make possible such a vitally important commitment

  18. Vent control device for nuclear reactor container

    International Nuclear Information System (INIS)

    Kubota, Ryuji.

    1989-01-01

    The present invention concerns automatic prevention of abnormal over-pressure and hydrogen gas flashing in a BWR type reactor container. That is, (1) if the pressure in the container is abnormally increased, the gas in the pressure suppression chamber is released to reduce the pressure thereby preventing over-pressure damage to the container. (2) Then, if exhaust gases are burnt to cause flashing explosion danger for the gases in the reactor container, the gas release is interrupted. The foregoing two functioins are automatically conducted in this device. Specifically, when the pressure in the reactor container reaches a predetermined allowable limit, a remote control operation valve is opened by automatic control means to release the gas in the vessel. Since the gas flow rate at the start of the release exceeds flame propagation velocity, there is no worry for flashing explosion. Further, if the pipeway flow velocity near the atmospheric release is reduced to less than the flame propagation velocity of the hydrogen gas, the opened valve is automatically closed. Accordingly, propagation of hydrogen gas flame into the container thus causing explosion can surely be prevented. (K.M.)

  19. Scientists of Russian Federal Nuclear Centre - ARSRITP and arms control and nuclear weapons non-proliferation problems

    International Nuclear Information System (INIS)

    Avrorin, E.N.; Andrusenko, B.A.; Voznyuk, R.I.; Voloshin, N.P.

    1994-01-01

    The activity of scientists of Russian Federal Nuclear Centre (RFNC) -ARSRITP in the field of nuclear disarmament control for the period of 1974 -1993 is discussed. RFNC - ARSRITP scientists in collaboration with american specialists have developed and employed in practice the techniques and equipment to control the bilateral Treaty on the limitation of Nuclear -Weapon Test. Experience of control over nuclear tests of threshold power and realization of new RFNC - ARSRITP scientific and technical projects have made a basis for development of measures and means of possible control methods to observe complete nuclear test ban

  20. The future of U.S.-Russia nuclear arms control

    Science.gov (United States)

    Pifer, Steven

    2017-11-01

    Nuclear arms control has long made contributions to U.S.-Soviet and U.S.-Russian security, but the current regime is at risk. The 1987 Intermediate-range Nuclear Forces Treaty may be headed for collapse. Both the United States and Russia are modernizing their strategic forces, and the fate of the 2010 New Strategic Arms Reduction Treaty is unclear. In the unlikely case that the sides are prepared to go beyond New START, there are ways to address further reductions and related issues. A collapse of the arms control regime, on the other hand, would mean the end of constraints on U.S. and Russian nuclear forces, a significant loss of transparency, and potential costs to U.S. security.

  1. Publicidad para inmigrantes en España. Un estudio desde las agencias

    Directory of Open Access Journals (Sweden)

    Antonio-J. Baladrón-Pazos

    2011-01-01

    Full Text Available En este artículo se aborda la situación actual y el futuro de la publicidad para inmigrantes en España. Se recogen los resultados de una investigación tipo Delphi realizada en 2009 y 2010 entre directivos de las agencias étnicas. El objetivo principal fue llevar a cabo un análisis sobre las tendencias que, según estos directivos, caracterizarán la publicidad para inmigrantes en los próximos años y sobre cómo realmente ellos desearían que evolucionase esta publicidad. Se reflexiona sobre la necesidad que tienen las empresas de orientar su comunicación a una sociedad cada vez más traspasada por la diversidad cultural, debido al notable crecimiento de la inmigración en la España de los últimos años. Entre las conclusiones obtenidas, destaca que en el futuro la publicidad para inmigrantes pasará por un mayor grado de creatividad, de utilización de la Web 2.0., de profesionalización del sector y de investigación sobre este segmento. También se platea como hipótesis de futuro que en esta publicidad sea cada vez menos relevante la dimensión étnica, teniendo menos importancia los referentes culturales de los orígenes de los inmigrantes. Esto será debido que los nuevos residentes estarán cada vez más integrados en la sociedad española y serán cada vez más incorporados a la planificación de todo tipo de campañas.

  2. Kinetic advantage of controlled intermediate nuclear fusion

    International Nuclear Information System (INIS)

    Guo Xiaoming

    2012-01-01

    The dominated process of controlled fusion is to let nuclei gain enough kinetic energy to overcome Coulomb barrier. As a result, a fusion scheme can consider two factors in its design: to increase kinetic energy of nuclei and to alter the Coulomb barrier. Cold Fusion and Hot fusion are all one-factor schemes while Intermediate Fusion is a twofactors scheme. This made CINF kinetically superior. Cold Fusion reduces deuteron-deuteron distance, addressing Coulomb barrier, and Hot Fusion heat up plasma into extreme high temperature, addressing kinetic energy. Without enough kinetic energy made Cold Fusion skeptical. Extreme high temperature made Hot Fusion very difficult to engineer. Because CIFN addresses both factors, CIFN is a more promising technique to be industrialized.

  3. Design analysis and microprocessor based control of a nuclear reactor

    International Nuclear Information System (INIS)

    Sabbakh, N.J.

    1988-01-01

    The object of this thesis is to design and test a microprocessor based controller, to a simulated nuclear reactor system. The mathematical model that describes the dynamics of a typical nuclear reactor of one group of delayed neutrons approximations with temperature feedback was chosen. A digital computer program has been developed for the design and analysis of a simulated model based on the concept of state-variable feedback in order to meet a desired system response with maximum overshoot of 3.4% and setting time of 4 sec. The state variable feedback coefficients are designed for the continuous system, then an approximation is used to obtain in the state variable feedback vector for the discrete system. System control was implemented utilizing Direct Digital Control (DDC) of a nuclear reactor simulated model through a control algorithm that was performed by means of a microprocessor based system. The controller performance was satisfactorily tested by exciting the reactor system with a transient reactivity disturbance and by a step change in power demand. Direct digital control, when implemented on a microprocessor adds versatility, flexibility in system design with the added advantage of possible use of optimal control algorithms. 6 tabs.; 30 figs.; 46 refs.; 6 apps

  4. Stop valve with automatic control and locking for nuclear reactors

    International Nuclear Information System (INIS)

    Chung, D.K.

    1980-01-01

    This invention generally concerns an automatic control and locking stop valve. Specifically it relates to the use of such a valve in a nuclear reactor of the type containing absorber elements supported by a fluid and intended for stopping the reactor in complete safety [fr

  5. Automatic coolant flow control device for a nuclear reactor assembly

    Science.gov (United States)

    Hutter, Ernest

    1986-01-01

    A device which controls coolant flow through a nuclear reactor assembly comprises a baffle means at the exit end of said assembly having a plurality of orifices, and a bimetallic member in operative relation to the baffle means such that at increased temperatures said bimetallic member deforms to unblock some of said orifices and allow increased coolant flow therethrough.

  6. 20. Quality assurance and quality control in nuclear medicine

    International Nuclear Information System (INIS)

    Vavrejn, B.

    1989-01-01

    Quality control principles to be applied when taking over and using nuclear medicine instrumentation are given. Such instrumentation includes activity meters, gamma detectors for in vitro measurements (manual or automated instruments), gamma detectors for in vivo measurements (with one or several probes), 'movable' scintigraphs and 'steady' scintigraphs (gamma cameras). (Z.S.)

  7. Y2K experiences in the nuclear material control area

    International Nuclear Information System (INIS)

    Yagi, T.; Suzuki, T.

    1999-01-01

    Though the Y2K problem was treated by each organization, it became systematic in Japan when Advanced Information and Telecommunication Society Promotion Head-quarters was established recognizing the importance and urgency of the issue. The summary of the action and some experiences concerning Y2K issues in the nuclear materials control area are presented

  8. Plasma physics and controlled nuclear fusion research 1988. V.3

    International Nuclear Information System (INIS)

    1989-01-01

    Volume 3 of the proceedings of the twelfth international conference on plasma physics and controlled nuclear fusion, held in Nice, France, 12-19 October, 1988, contains papers presented on inertial fusion. Direct and indirect laser implosion experiments, programs of laser construction, computer modelling of implosions and resulting plasmas, and light ion beam fusion experiments are discussed. Refs, figs and tabs

  9. Maintaining quality control in a nontraditional nuclear technology degree program

    International Nuclear Information System (INIS)

    DeSain, G.W.

    1989-01-01

    Regents College, created by the Board of Regents of the University of The State on New York in 1971, has been offering, since January 1985, AS and BS degrees in nuclear technology. The impetus for establishing the nuclear technology degrees came from nuclear utility management and had to do with the US Nuclear Regulatory Commission proposed rule regarding degreed operators on shift. There are a variety of ways to earn credits in Regents College degree programs: (1) college courses taken for degree-level credit from regionally accredited colleges; (2) courses sponsored by business, industry, or government that have been evaluated and recommended for credit by the New York National or American Council on Education (ACE's) Program on Noncollegiate Sponsored Instruction (PONSI); (3) military education that has been evaluated by ACE PONSI; (4) approved college-proficiency examinations; and (5) special assessment: an individualized examination of college-level knowledge gained from experience or independent study. Nuclear technology students primarily use college course work, evaluated military education, and proficiency examinations to complete degree programs. However, an increasing number of utilities are having training programs PONSI evaluated, resulting in an increased use of these courses in the nuclear technology degrees. Quality control is a function of several factors described in the paper

  10. Controlled energy generation from nuclear fusion. 60th year atw

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, Georg [Pintsch Bamag AG, Frankfurt am Main (Germany)

    2015-02-15

    Prospects increase, that with a controlled process of nuclear fusion one day an additional nuclear energy source will be commercially exploitable. In what follows, scientific principles according to the most recent research will be presented. Since approximately 30 years we are aware of the fact, that energy in form of light and heat provided by the sun and other fixed stars since over four billions years resulted from reactions of atomic nuclei. A series of such reactions became known which are considered for 'thermonuclear' processes, for example the carbon cycle by Bethe, where hydrogen is converted into helium. Most of the reflections and experiments dealt until 1938 with the reaction between nuclei of light elements. The possibility of splitting heavy nuclei was not anticipated. Its discovery by Hahn and Strassmann was a complete surprise - so to speak a rash reaction to release energy at the end of the element row. This 'way out' captured the interest of nuclear physicist for more than a decade. Only today, by starting to construct big nuclear power plants - only today, being able to assess the possibilities and limitations of this technology, the idea of energy generation through nuclear fusion steps into the foreground of nuclear research.

  11. Measurement and control systems using nuclear radiation

    International Nuclear Information System (INIS)

    Melo, Jose Altino Tupinamba; Madi Filho, Tufic

    2007-01-01

    Non-destructive Assay is applied to machines and components quality tests. These elements would not have a good performance if they were conceived without concern about the mechanical project quality, used materials, manufacture processes and inspection and maintenance methodology. In this work, a measure and control system of non destructive processes was developed, using a radioactive source with a defined energy in function of the material to be analyzed. This system involves: interface of input/output (I/O) (hardware) and graphical interface (software). In the non destructive analysis, it is made the comparison of the signal proceeding from the sensor with a signal preset (set point) or analogical signal of reference (Base Line), which is adjusted in the I/O interface. Analyzed the signal, the system will make the decision: to reject or to accept the analyzed material. The I/O interface is implemented by electronic equipment with a MCS51. The purpose of this interface is to supply conditions to exchange information, using serial RS232, between the sensor and the microcomputer. The graphical interface (software) is written in visual C++ language. (author)

  12. Quality control in nuclear fuel fabrication

    International Nuclear Information System (INIS)

    Abdelhalim, A.S.; Elsayed, A.A.; Shaaban, H.I.

    1988-01-01

    The department of metallurgy, NRC Inchass is embarking on a programme of on a laboratory scale, fuel pins containing uranium dioxide pellets are going to be produced. The department is making use of the expertise and equipment at present available and is going to utilize the new fuel pin fabrication unit which would be shortly in operation. The fabrication and testing of uranium dioxide pellets then gradually adapt them and develop, a national know how in this field. This would also involve building up of indigenous experience through proper training of qualified personnel. That are applied to ensure quality of U o 2 pellets, the techniques implemented, the equipment used and the specifications of the equipment presently available. The following parameters are subject to quality control tests: density. O/U ration, hydrogen content, microstructure, each property will be discussed, measurements related to U o 2 powders, including flow ability, bulk density, O/U ratio, bet surface area and water content will be critically discussed. Relevant tests to ensure Q C of pellets are reviewed. These include surface integrity, density, dimensions, microstructure.4 fig., 1 tab

  13. Electromotor control rod drive for nuclear reactors

    International Nuclear Information System (INIS)

    Baker, S.M.

    1975-01-01

    The positioning of a control rod arranged in a pressure vessel takes place with a drive. This protrudes out of the pressure vessel through a support and is formed from a rotating field motor with energy source, e.g. alternating current connection. Its stator surrounds a section of a pressure casing which covers the length of the drive. The rotor is arranged in the pressure casing and interacts with a shaft lying in the rotation axis. Furthermore, segments are hinged on it, each of which forms two arms of a rocker. Each segment can be revolved against a storing force in a plane containing the rotation axis, through the stator field acting on one of the rocker arms. In order that the drive motor is automatically blocked should the electricity supply fail, the other rocker arm can be connected with a fixed cased component of the drive having the effect of a friction break or a form-locking mechanical catch. (DG/LH) [de

  14. Backfitting of the nuclear plant V1 power control system

    International Nuclear Information System (INIS)

    Karpeta, C.; Rubek, J.; Stirsky, P.

    1985-01-01

    The paper deals with some aspects of implementation of modifications into the Czechoslovak nuclear plant V1 control system as called for on the basis of experience gained during the first period of the plant operation. Brief description of the plant power control system and its main functions is given. Some deficiencies in the system performance during abnormal conditions are outlined and measures taken to overcome them are presented. (author)

  15. The computerized radiation control system for the nuclear power plant

    International Nuclear Information System (INIS)

    Hunamoto, H.; Sato, T.; Taniguchi, K.

    1993-01-01

    Major works of Radiation control in nuclear power plant consist of occupational exposure control, radiation monitoring of working areas and surveillance of monitoring equipment, environmental monitoring and so on. Since a large amount of data will be generated from these works, therefore use of high performance computers will be indispensable. The systematization is presently being advanced in The Japan Atomic Power Company from this viewpoint and the project is being realized smoothly. The actual state is introduced

  16. Regulatory control of radioactivity and nuclear fuel cycle in Canada

    International Nuclear Information System (INIS)

    Hamel, P.E.; Jennekens, J.H.

    1977-05-01

    Legislation and regulations giving birth to the Atomic Energy Control Board (AECB) are outlined, as well as current licencing procedures. The AECB bases its health and safety criteria on ICRP recommendations. R and D is funded to aid regulatory activity. Licencing activities cover uranium resource management, uranium mining and milling, nuclear generating stations, heavy water plants, and radioactive waste management. Safeguards, physical security, and international controls are also concerns of the AECB. (E.C.B.)

  17. NMR magnetic field controller for pulsed nuclear magnetic resonance experiments

    International Nuclear Information System (INIS)

    Scheler, G.; Anacker, M.

    1975-01-01

    A nuclear magnetic resonance controller for magnetic fields, which can also be used for pulsed NMR investigations, is described. A longtime stability of 10 -7 is achieved. The control signal is generated by a modified time sharing circuit with resonance at the first side band of the 2 H signal. An exact calibration of the magnetic field is achieved by the variation of the H 1 - or of the time-sharing frequency. (author)

  18. Water chemistry control in thermal and nuclear power plants. 9. Nuclear fuel management

    International Nuclear Information System (INIS)

    2008-01-01

    The chemical management of fuels in nuclear power plants aims at maintenance of the soundness of nuclear fuels and at reduction of the radiation exposure of the working employees. With regard to the former, particular attention should be paid to the fabrication process of fuel assembly, mainly for chemical management for fuel cladding tubes together with fuel pellet-clad chemical interactions, and to the outer tubes in the power plants. With regard to the latter, the fabrication process should be carefully controlled to prevent radioactive impurity increase in primary cooling water systems by maintaining cleaning level and decreasing surface contamination. Reactions of zircalloy with water or hydrogen forming ZrH 2 , sintered density of UO 2 pellet controlling water content, pellet-clad interactions, stress corrosion cracking, crud induced fuel failure, behaviors of such fission products as I, Xe, Kr, and Cs in plants are also important to water and chemical management of nuclear fuels. (S. Ohno)

  19. Nuclear materials control and accountability criteria for upgrades measures

    Energy Technology Data Exchange (ETDEWEB)

    Erkkila, B.H.; Hatcher, C.R.

    1998-11-01

    As a result of major political and societal changes in the past several years, methods of nuclear material control may no longer be as effective as in the past in Russia, the Newly Independent States (NIS), and the Baltic States (BS). The objective of the Department of Energy (DOE) Material Protection, Control, and Accounting Program (MPC and A) is to reduce the threat of nuclear proliferation by collaborating with Russia, NIS, and BS governments to promote western-style MPC and A. This cooperation will improve the MPC and A on all weapons useable nuclear materials and will establish a sustainable infrastructure to provide future support and maintenance for these technology-based improvements. Nuclear materials of proliferation concern include materials of the types and quantities that can be most easily and directly used in a nuclear weapon. Sabotage of nuclear material is an event of great concern and potentially disastrous consequences to both the US and the host country. However, sabotage is currently beyond the scope of program direction and cannot be used to justify US-funded MPC and A upgrades. Judicious MPC and A upgrades designed to protect against insider and outsider theft scenarios would also provide addition, although not comprehensive, protection against saboteurs. This paper provides some suggestions to establish consistency in prioritizing system-enhancement efforts at nuclear material facilities. The suggestions in this paper are consistent with DOE policy and directions and should be used as a supplement to any policy directives issued by NN-40, DOE Russia/NIS Task Force.

  20. Regulatory control of radioactivity and nuclear fuel cycle in Canada

    International Nuclear Information System (INIS)

    Hamel, P.E.; Jennekens, J.H.

    1977-01-01

    The mining of pitchblende for the extraction of radium some four decades ago resulted in a largely unwanted by-product, uranium, which set the stage for Canada to be one of the first countires in the world to embark upon a nuclear energy program. From this somewhat unusual beginning, the Canadian program expanded beyond mining of uranium-bearing ores to include extensive research and development in the field of radio-isotope applications, research and power reactors, nuclear-fuel conversion and fabrication facilities, heavy-water production plants and facilities for the management of radioactive wastes. As in the case of any major technological development, nuclear energy poses certain risks on the part of those directly engaged in the industry and on the part of the general public. What characterizes these risks is not so much their physical nature as the absence of long-term experience and the confidence resulting from it. The early development of regulatory controls in the nuclear field in Canada was very much influenced by security considerations but subsequently evolved to include radiological protection and safety requirements commensurate with the expanding application of nuclear energy to a wide spectrum of peaceful uses. A review of Canadian nuclear regulatory experience will reveal that the risks posed by the peaceful uses of nuclear energy can be controlled in such a manner as to ensure a high level of safety. Recent events and development have shown however that emphasis on the risks associated with low-probability, high-consequence events must not be allowed to mask the importance of health and safety measures covering the entire fuel cycle

  1. Nuclear materials control and accountability criteria for upgrades measures

    International Nuclear Information System (INIS)

    Erkkila, B.H.; Hatcher, C.R.

    1998-01-01

    As a result of major political and societal changes in the past several years, methods of nuclear material control may no longer be as effective as in the past in Russia, the Newly Independent States (NIS), and the Baltic States (BS). The objective of the Department of Energy (DOE) Material Protection, Control, and Accounting Program (MPC and A) is to reduce the threat of nuclear proliferation by collaborating with Russia, NIS, and BS governments to promote western-style MPC and A. This cooperation will improve the MPC and A on all weapons useable nuclear materials and will establish a sustainable infrastructure to provide future support and maintenance for these technology-based improvements. Nuclear materials of proliferation concern include materials of the types and quantities that can be most easily and directly used in a nuclear weapon. Sabotage of nuclear material is an event of great concern and potentially disastrous consequences to both the US and the host country. However, sabotage is currently beyond the scope of program direction and cannot be used to justify US-funded MPC and A upgrades. Judicious MPC and A upgrades designed to protect against insider and outsider theft scenarios would also provide addition, although not comprehensive, protection against saboteurs. This paper provides some suggestions to establish consistency in prioritizing system-enhancement efforts at nuclear material facilities. The suggestions in this paper are consistent with DOE policy and directions and should be used as a supplement to any policy directives issued by NN-40, DOE Russia/NIS Task Force

  2. Hierarchical control of a nuclear reactor using uncertain dynamics techniques

    International Nuclear Information System (INIS)

    Rovere, L.A.; Otaduy, P.J.; Brittain, C.R.; Perez, R.B.

    1988-01-01

    Recent advances in the nonlinear optimal control area are opening new possibilities towards its implementation in process control. Algorithms for multivariate control, hierarchical decomposition, parameter tracking, model uncertainties actuator saturation effects and physical limits to state variables can be implemented on the basis of a consistent mathematical formulation. In this paper, good agreement is shown between a centralized and a hierarchical implementation of a controller for a hypothetical nuclear power plant subject to multiple demands. The performance of the hierarchical distributed system in the presence of localized subsystem failures is analyzed. 4 refs., 13 figs

  3. Reactivity control of nuclear power reactors: new options

    International Nuclear Information System (INIS)

    Alcala, F.

    1984-01-01

    Some actual aspects (referring to economy, non-proliferation and environmental impact) of nuclear power reactors has been analyzed from the point of view of the reactivity control physics. Specially studied have been the physical mechanisms related with the spectral shift control method and their general positive effects on those aspects. The analysis carried out suggested the application of the above method of control to reactors with non-hydrogenous fuel cells, which are mainly characterized by their high moderator/fuel ratio. Finally three different types of such fuel cells are presented and some results about one of them (belonging to a PHWR controlled by graphite rods) are given. (author)

  4. LA AGENCIA DE LA NIÑA Y EL NIÑO EN LA CONDICIÓN PRE-CIUDADANA

    Directory of Open Access Journals (Sweden)

    Marcela González Coto

    2012-01-01

    Full Text Available El presente ensayo se deriva del trabajo que recientemente han desarrollado la Fundación PANIAMOR y la Dirección General del Programa CEN-CINAI del Ministerio de Salud, sobre la formación ciudadana de los niños y las niñas costarricenses en la primera infancia. Las acciones conjuntas se han enfocado en la capacidad de agencia de los niños y las niñas, entendida como la disposición para explorar, reflexionar, actuar y valorarse en sus entornos como sujetos políticos. Para este fin, en este ensayo se lleva a cabo un análisis crítico de los modelos ideológicos y culturales que, en la sociedad contemporánea, legitiman y fomentan la condición de "pre-ciudadanía" de la infancia, mermando su desempeño, presente y futuro, como ciudadanos plenos de la sociedad. El análisis se sustenta en materiales diversos, de distintos orígenes, todos relativos a las condiciones actuales de la infancia y las formas como se restringen estas capacidades de agencia. El ensayo también aborda las dificultades y obstáculos que enfrenta un replanteamiento de las relaciones entre adultos y niños. También se documentan los esfuerzos recientes, tanto locales como internacionales, para crear marcos alternativos desde los cuales replantear la relación institucional entre unos y otros. Como principal resultado del ensayo, se delinean un conjunto de directrices, con expresión curricular, que pueden sustentar el desarrollo de las capacidades de agencia infantil con una manifestación directa en la niñez ciudadana, la cual, se plantea, se articula en tres dimensiones o ejes de desarrollo (la responsabilidad, la autonomía y el pensamiento complejo.

  5. Fuzzy controller for real time supervision of nuclear power reactor

    International Nuclear Information System (INIS)

    Bala Subramanian, R.

    2012-01-01

    Generally nuclear energy provides about 60% of the whole electricity production. A modulation of the nuclear power plants must be able to respond to the demand on the network. The pressurized water nuclear reactor has to yield correctly a load set point. Fundamentally, two parameters are concerned in leading this task to a successful conclusion: the power axial-offset and the control rods position. The focus of this study is the automation of the control of the power axial-offset by adding soluble boron and by minimizing the volume flows through the water pump. It is also important to take into consideration the liquid waste volume. Water or boron is injected into the reactor primary circuit. At the present time this task is still performed manually by an operator, for all previous attempts to automate it failed. That device, sketchily described in the paper, gave rise to the development of a real-time fuzzy controller for the power axial-offset and the control rods insertion in a pressurized water reactor (PWR). The fuzzy controller, which is the main subject of the paper, expresses more naturally the human expertise, thus avoiding the previous issue of empirical tunings. It was implemented in simulation using Matlab-Simulink on a Sun workstation. Two realistic tests discussed show that the fuzzy controller runs as efficiently as an expert operator does

  6. Overall aspects of control of ISIS-type nuclear reactor

    International Nuclear Information System (INIS)

    Amato, S.; Santinelli, A.

    1996-01-01

    The paper describes the main aspects related to the definition of main controls required to operate an ISIS-type nuclear power reactors. ISIS is a PWR-type intrinsically safe nuclear reactor designed by ANSALDO, based on density lock concept; it presents, between the other safety functions, self-depressurization and core cooling capability for unlimited time. Due to its specific characteristics, the ISIS reactor required to development of new control philosophy (if compared with actual nuclear power reactor) with the implementation of new control functions, for instance the density locks hot/cold interface locations control. This paper describes the main control functions implemented, their rationale, as well as the dynamic simulation performed to verify the adequacy of controls definitions. The dynamic simulations here described refers to a step-wise power ramp of 100-90-100 (% of nominal power) and to a power ramp of 100-50-100 with a slope of 5%/min; the results obtained have shown the ISIS capability to perform such operational transients, despite its innovative design was mainly focused on intrinsically safe behaviour. (author)

  7. Regulation on control of nuclear materials of the 31 Oct 1986

    International Nuclear Information System (INIS)

    1986-01-01

    The new regulation on accounting for and control of nuclear materials was issued on 31 October 1986 and put into force on 1 February 1987. The following provisions are included: aim and scope, responsibility for nuclear material accounting and control, rights and obligations of the nuclear material control officer, licensing, facility's instructions for nuclear material control, accounting, records, reporting, unusual events, inspections, nuclear material transfers, exemptions and termination of IAEA safeguards, final provisions, and definitions of terms

  8. Application of controllable unit approach (CUA) to performance-criterion-based nuclear material control and accounting

    International Nuclear Information System (INIS)

    Foster, K.W.; Rogers, D.R.

    1979-01-01

    The Nuclear Regulatory Commission is considering the use of maximum-loss performance criteria as a means of controlling SNM in nuclear plants. The Controllable Unit Approach to material control and accounting (CUA) was developed by Mound to determine the feasibility of controlling a plant to a performance criterion. The concept was tested with the proposed Anderson, SC, mixed-oxide plant, and it was shown that CUA is indeed a feasible method for controlling a complex process to a performance criterion. The application of CUA to an actual low-enrichment plant to assist the NRC in establishing performance criteria for uranium processes is discussed. 5 refs

  9. Nuclear material control at IEA-R1 nuclear research reactor

    International Nuclear Information System (INIS)

    1988-01-01

    The control measurements system and verification of physical inventory for fuel elements used in the operation of IEA-R1 nuclear research reactor are described. The computer code used for burn-up calculation are shown. (E.G.) [pt

  10. La calidad en las agencias de viajes ante el reto de la Innovación Tecnológica

    OpenAIRE

    Esteban Alberdi, Cristina; Rubio Andrada, Luis

    2002-01-01

    Las Agencias de Viajes en España están asistiendo a una reestructuración del sector y a un cambio en sus actividades tradicionales. Para afrontar estos cambios deben desarrollar e implantar nuevas estrategias basadas en la calidad del servicio prestado. Para lograrlo, se propone un modelo basado en cuatro líneas de actuación que son la mejora de la formación de los agentes, el conocimiento de las características de su demanda, la adecuación a dicha demanda a través de productos diferenciados ...

  11. Construcción del Estado en El Salvador : burocracia profesional y gobernanza participativa en agencias independientes

    OpenAIRE

    Martínez Hernández, Gabriel Alejandro

    2016-01-01

    [ES]En la búsqueda de un Estado más capaz y democrático, El Salvador ha realizado diversas reformas a la Administración Pública. Una de las transformaciones más importantes en las últimas décadas, ha sido la creación de numerosas agencias independientes ("Instituciones Oficiales Autónomas"), que han reorientado al Estado hacia una nueva gobernanza. No obstante su importancia y trascendencia, este fenómeno no había sido estudiado en el país. Así, esta tesis examina la construcción del Estado s...

  12. Uso de estrategias de comunicación en internet de las agencias de viaje españolas

    OpenAIRE

    Sabaté i Garriga, Ferran; Cañabate Carmona, Antonio; Velarde-Iturralde, M.Andrea; Griñón-Barceló, Raquel

    2010-01-01

    La evolución del marketing tradicional al electrónico se ha dado con la llegada de las nuevas tecnologías de la información y la comunicación, las cuales han repercutido en las estrategias de marketing utilizadas en las empresas. Se intenta cuantificar el nivel de utilización de las estrategias de comunicación basadas en internet. Se analiza el sector de las agencias de viaje al ser uno de los que más invierte en internet. Se discuten los resultados y limitaciones y se proponen lí...

  13. PLAN DE EMPRESA PARA LA CREACIÓN DE UNA AGENCIA DE VIAJES DE NUEVA CREACIÓN: ANROCA SL

    OpenAIRE

    ROCHER CALBO, ÁNGELA

    2015-01-01

    [ES] La idea de trabajo de final de carrera que voy a desarrollar es un plan de empresa basado en la apertura de una nueva agencia de viajes, denominada ANROCA, SL. La empresa se especializará en viajes para negocios ya que tiene una menor estacionalidad, pero siempre tendrá recursos para satisfacer viajes de ocio. Para describir y desarrollar esta oportunidad de negocio realizaré un Plan de empresa, que va a tratar de examinar la viabilidad técnica, económica y financiera, y explicaré ...

  14. La rehabilitación de un ícono de la modernidad la Iglesia Mater Misericordiae = The rehabilitation of an icon of modernity the Church Mater Misericordiae

    Directory of Open Access Journals (Sweden)

    María Belén Gómez

    2017-12-01

    Full Text Available La iglesia Mater Misericordiae es un edificio sacro levantado en Baranzate (Milán a finales de la década de los años 50.Supone la culminación de una serie de experiencias que pretendían la renovación de la liturgia y, con ello, la renovación de laarquitectura. Su construcción, enmarcada dentro de un plan más amplio acometido por el Arzobispado de Milán, supuso un gran avance en varios campos relacionados, principalmente, con la modernidad de la arquitectura sacra, la construcción y las nuevas tecnologías. Incorpora el uso no solamente del hormigón, material poco utilizado hasta ese momento en construcciones sacras, sino que, además, introduce un sistema de prefabricación y postesado “In situ” para la ejecución de la estructura que muestra el interés de los técnicos de la época por hallar nuevos medios de sistematización de la construcción. El sistema constructivo de cerramiento utilizado permite delimitar el espacio litúrgico mediante una piel translúcida que rodea el espacio, permitiendo la entrada de luz natural durante el día y la iluminación del entorno durante la noche. La presente investigación trata sobre las diferentes soluciones que se han empleado en la resolución de las fachadas de cerramiento, haciendo especial hincapié en la solución utilizada en la última rehabilitación a la que ha sido sometida. En este caso se han tratado de incorporar las tecnologías modernas más avanzadas para la resolución de los problemas que esta presentaba pero respetando al máximo la idea del proyecto original. Abstract The church Mater Misericordiae is a sacred building raised in Baranzate (Milan at the end of the decade of the 50s. It supposes the culmination of a series of experiences that were claiming the renovation of the liturgy and, with it, the renovation of the architecture. His construction, framed within a broader plan undertaken by the Archbishopric of Milan, supposed a great advance in several fields

  15. A nuclear data acquisition system flow control model

    International Nuclear Information System (INIS)

    Hack, S.N.

    1988-01-01

    A general Petri Net representation of a nuclear data acquisition system model is presented. This model provides for the unique requirements of a nuclear data acquisition system including the capabilities of concurrently acquiring asynchronous and synchronous data, of providing multiple priority levels of flow control arbitration, and of permitting multiple input sources to reside at the same priority without the problem of channel lockout caused by a high rate data source. Finally, a previously implemented gamma camera/physiological signal data acquisition system is described using the models presented

  16. Regulatory control, nuclear safety regulation and waste management in Spain

    International Nuclear Information System (INIS)

    Martin, A.

    2000-01-01

    This article presents the challenges that faces the spanish regulatory authority. The deregulation of electricity industry imposes severe changes in nuclear power economics and forces nuclear power to compete with other sources of electricity. A pressure is perceived for regulatory effectiveness primarily since the cost of regulation is a component of the cost of the product. This effectiveness gain in regulatory control will be reached through systematic strategic analysis, formulation and implementation. The regulatory aspects of plant life extension and of waste management are examined

  17. Emociones, agencia y experiencia escolar: el papel de los vínculos en los procesos de inclusión escolar en el nivel secundario

    Directory of Open Access Journals (Sweden)

    Mariana Nobile

    2014-04-01

    Full Text Available Desde hace unos años venimos explorando el modo en que la dimensión emocional de la experiencia escolar interviene en los procesos de inclusión-exclusión educativa en el nivelsecundario. Aquí analizamos en profundidad las entrevistas realizadas a 16 jóvenes de sectores populares que han egresado de las llamadas “Escuelas de Reingreso” en las que se indagaron las formas en que ellos enunciaban su experiencia emocional, explorando lasfuentes de dicha emocionalidad. Respeto, entusiasmo y tranquilidad fueron lasformas enunciativas utilizadas para describir sus experiencias. Nuestra hipótesis es que el tipo de vínculos construidos con los docentes en el marco de un formato escolar particular genera una emocionalidad positiva, que permite resignificar la trayectoria escolar personal, reposicionarse frente a la institución escolar y potenciar su sensación de agencia, en términos de sentirse con mayores márgenes de control acerca de su propia vida, permitiéndole de este modo desplegar diferentes tipos de estrategias personales para su integración laboral, educativa y familiar.

  18. Externalización de la gestión documental audiovisual en las televisiones por medio de productoras audiovisuales y agencias de noticias

    Directory of Open Access Journals (Sweden)

    Jorge CALDERA-SERRANO

    Full Text Available Se analiza la simplificación en el método de análisis de contenido en los archivos televisivos derivados de factores diversos tales como la reestructuración de la organización documental, los ajustes de los recursos humanos y económicos así como la adquisición de la descripción de análisis del contenido a empresas creadoras de contenidos tales como las productoras y las agencias de noticias audiovisuales. Ambos factores, de forma simbiótica, han modificado la descripción documental eliminando la descripción de contenido temático, geográfico y onomástico así como el control terminológico y documental por medio de herramientas propias del lenguaje documental. Estos cambios se traducen en graves problemas de normalización y recuperación que no parecen solventados por medio de técnicas para la identificación automática de contenido audiovisual (herramientas biométricas.

  19. Concerning major items in government ordinance requiring modification of part of enforcement regulation for law relating to control of nuclear material, nuclear fuel and nuclear reactor

    International Nuclear Information System (INIS)

    1989-01-01

    The report describes major items planned to be incorporated into the enforcement regulations for laws relating to control of nuclear material, nuclear fuel and nuclear reactor. The modifications have become necessary for the nation to conclude a nuclear material protection treaty with other countries. The modification include the definitions of 'special nuclear fuel substances' and 'special nuclear fuel substances' and 'special nuclear fuel substances subject to protection'. The modifications require that protective measures be taken when handling and transporting special nuclear fuel substances subject to protection. Transport of special nuclear fuel substances requires approval from the Prime Minister or Transport Minister. Transport of special nuclear fuel substances subject to protection should be conducted after notifying the prefectural Public Safety Commission. Transport of special nuclear fuel substances subject to protection requires the conclusion of arrangements among responsible persons and approval of them from the Prime Minister. (N.K.)

  20. Monitor and control device in a nuclear power plant

    International Nuclear Information System (INIS)

    Neda, Toshikatsu.

    1980-01-01

    Purpose: To facilitate and ensure monitor and control, as well as improve the operation efficiency and save man power, by render the operation automatic utilizing a process computer and centralizing the monitor and control functions. Constitution: All of the operations from the start up to stop in a nuclear power plant are conducted by way of a monitor and control board. The process data for the nuclear power plant are read into the process computer and displayed on a CRT display. Controls are carried out respectively for the control rod on a control rod panel, for the feedwater rate on a feedwater control panel, for the recycling flow rate on a recycling control panel and for the turbine generator on a turbine control panel. When the operation is conducted by an automatic console, operation signals from the console are imputted into the process computer and the state of the power plant is monitored and automatic operation is carried out based on the operation signals and from signals from each of the panels. (Moriyama, K.)

  1. Multivariable robust control of an integrated nuclear power reactor

    Directory of Open Access Journals (Sweden)

    A. Etchepareborda

    2002-12-01

    Full Text Available The design of the main control system of the CAREM nuclear power plant is presented. This plant is an inherently safe low-power nuclear reactor with natural convection on the primary coolant circuit and is self-pressurized with a steam dome on the top of the pressure vessel (PV. It is an integrated reactor as the whole primary coolant circuit is within the PV. The primary circuit transports the heat to the secondary circuit through once-through steam generators (SG. There is a feedwater valve at the inlet of the SG and a turbine valve at the outlet of the SG. The manipulated variables are the aperture of these valves and the reactivity of the control rods. The control target is to regulate the primary and secondary pressures and to monitor steam flow reference ramps on a range of nominal flow from 100% to 40%. The requirements for the control system are robust stability, low-order simple controllers and transient/permanent error bounding. The controller design is based on a detailed RETRAN plant model, from which linear perturbed open-loop dynamic models at different powers are identified. Two low-order nominal models with their associated uncertainties are chosen for two different power ranges. Robust controllers with acceptable performances are designed for each range. Numerical optimization based on the loop-shaping method is used for the controller design. The designed controllers are implemented in the RETRAN model and tested in simulations achieving successful results.

  2. Nuclear knowledge portal for supporting licensing and controlling nuclear activities in the Brazilian Nuclear Energy Commission

    International Nuclear Information System (INIS)

    Gomes, E.; Braga, F.

    2005-01-01

    The knowledge economy is pivotal for moving the wealth and development of traditional industrial sectors - abundant in manual labour, raw materials and capital - to areas whose products, processes and services are rich in technology and knowledge. Even in research areas such as nuclear energy, where goods are based on high technology, the ability to transform information into knowledge, and knowledge into decisions and actions, is extremely important. Therefore, the value of products from these areas depends more and more on the degree of innovation, technology and intelligence incorporated by them. Thus, it has become increasingly important and relevant to acquire strategic knowledge and make it available to the organisation. Therefore, the objective of this paper is to present the construction of a Nuclear Knowledge Portal for aiding and streamlining the Licensing and Management activities of the CNEN. (author)

  3. Nuclear knowledge portal to support licensing and control nuclear activities in the Brazilian Nuclear Energy Commission

    International Nuclear Information System (INIS)

    Gomes, M.E.; Braga, M.F.

    2004-01-01

    The Knowledge Economy is pivotal for moving the wealth and development of traditional industrial sectors - abundant in manual labor, raw materials and capital - to areas whose products, processes and services are rich in technology and knowledge. Even in research areas such as nuclear energy, where goods are based on high technology, the ability to transform information into knowledge, and knowledge into decisions and actions, is extremely important. Therefore, the value of products from these areas depends more and more on the degree of innovation, technology and intelligence incorporated by them. Thus, it has become increasingly important and relevant to acquire strategic knowledge and make it available to the organization. Therefore, the objective of this article is to present the construction of a Nuclear Knowledge Portal for aiding and streamlining the Licensing and Management activities of the CNEN. (author)

  4. Apparatus and method for controlling a nuclear reactor

    International Nuclear Information System (INIS)

    Musick, C.R.

    1978-01-01

    A control system and method for a nuclear steam supply system for calculating the appropriate operating limits of the system based on the system's design limits are described. The control system monitors the appropriate parameters of the nuclear steam supply system, modifies one of the parameters, and calculates the desired operating limit on the basis of the unmodified and modified parameters. The parameter selected to be modified is adjusted in such a way as to account for the possible occurrence of all anticipated operational occurrences. The degree of adjustment encompasses the factors of the possibility of the occurrence of a worst case accident; axial power distribution; and the delay times of the protection system which include sensing, calculating, and activation time delays. The operating limit thus generated includes a margin which allows sufficient time for the termination of operation or for control of the system such that the design limits are not violated

  5. Reactor instrumentation and control in nuclear power plants in Germany

    International Nuclear Information System (INIS)

    Aleite, W.

    1993-01-01

    The pertinent legislation, guidelines and standards of importance for nuclear power plant construction as well as the relevant committees in Germany are covered. The impact of international developments on the German regulatory scene is mentioned. A series of 15 data sheets on reactor control, followed by 5 data sheets on instrumentation and control in nuclear power plants, which were drawn up for German plants, are compared and commented in some detail. Digitalization of instrumentation and control systems continues apace. To illustrate the results that can be achieved with a digitalized information system, a picture series that documents a plant test of behavior on simulated steam generator tube rupture is elaborately commented. An outlook on backfitting and upgrading applications concludes this paper. (orig.) [de

  6. On-line control of nuclear fuel reprocessing

    International Nuclear Information System (INIS)

    Parus, I.; Kierzek, J.; Zoltowski, T.

    1977-01-01

    The development trends in the field of chemical processes control and the present state of the development of continuous composition analysers has been described. On this background the peculiarities of on-line control methods for spent nuclear fuel reprocessing have been discussed. The measuring methods for direct and indirect determination of chemical composition and nuclear safety are reviewed in detail. The review comprises such methods as: measurement of α, γ and neutron radiation emitted both by nuclides present in technological solutions and using external sources of different radiation, X-ray fluorescence, measurements of physicochemical parameters connected with the composition (pH, density, electrical conductivity), polarography and spectrophotometry. At the end of this review some new trends in process control based on dynamic process models have been presented. (author)

  7. Non-proliferation through effective international control, with particular reference to peaceful uses of nuclear material as a result of nuclear disarmament and international control of plutonium

    International Nuclear Information System (INIS)

    Imai, Ryukichi

    1993-01-01

    The role of nuclear factors in the international political situation has changed. The emphasis is now on the new circumstance of the post cold-war world. Non-proliferation is dealt with through effective international control, with particular reference to peaceful uses of nuclear material as a result of nuclear weapons dismantling and international control of plutonium

  8. Maintenance quality surveillance for nuclear reactor instrument and control systems

    International Nuclear Information System (INIS)

    Clement, T.M.

    1976-01-01

    A description is given of a formal program of mandatory testing and inspection for assurance of reliability at the N-reactor. The techniques and procedures are called Equipment Maintenance Standards (EMS) and cover the nuclear plant systems which affect nuclear safety, environmental control, continuity of operation and reactor life. The scope of the program is such that all electrical, chemical, mechanical, and nuclear devices with interconnecting circuitry, linkages, and piping are functionally checked and/or inspected from sensors through actuating media necessary for carrying out the defined functions under startup, operating, and shutdown conditions and also under any credible accident condition. Records are kept of the AS FOUND results of the tests and inspections along with adjustments and repairs required to correct any out-of-limits conditions found. These records are accumulated and are used as a source for quantitative reliability information and for evaluating wear-out or design problems

  9. Mechanical properties of freeze-dried and irradiated bone chips, fascia lata and dura mater

    International Nuclear Information System (INIS)

    De Guzman, Z.M.; Vajaradul, Y.

    1996-01-01

    The comparison strengths of freeze-dried and irradiated bone chips such as three-dimensional cortex (3DC) and two-cortico cancellous (2CC) are investigated. The results show that the (3DC) exhibits a higher compression strength (1.2kN cm -2 in deep frozen states. Rehydration of the freeze-dried bone chips after 15 min with normal saline solution restores the strength of materials by 30%. The tensile strengths of fascia lata and dura mater are also studied. A marked decrease of tensile strength is noted in the irradiated and freeze-dried samples, however, reconstitution with normal saline solution restores the tensile strength of the tissues to about 40-56%. (author). 8 refs., 6figs

  10. Mater Nostra: The Anti-blasphemy Message of the Feminist Punk-Prayer

    Directory of Open Access Journals (Sweden)

    Elena Ivanovna Volkova

    2014-12-01

    Full Text Available In this essay I develop a blasphemy counter-discourse arguing that it was ecclesial and state authorities who committed blasphemies, which were condemned by Pussy Riot’s punk-prayer. Thus, the performance in this respect may be interpreted as an anti-blasphemy protest. The blasphemy list includes the collaboration of the church with the authoritarian state, known as heresy of Sergianism; Caesar and Temple idolatry, blasphemy against the Holy Spirit, Virgin Mary and Folly for Christ’s sake. The punk-prayer may be interpreted as a feminine version of the Lord’s Prayer – Mater Nostra. Several corporeal narratives in the background – women’s dress code and rape debates, Virgin Mary’s belt, and its alleged miraculous ability to help women to deliver a baby – may be seen as allegories of feminist vs. patriarchal opposition in Russian religious and political culture.

  11. Perception of tomorrow's nuclear power plant control rooms

    International Nuclear Information System (INIS)

    Meyer, O.R.

    1986-01-01

    Major development programs are upgrading today's light water reactor nuclear power plant (NPP) control rooms. These programs involve displays, control panel architecture, procedures, staffing, and training, and are supported by analytical efforts to refine the definitions of the dynamics and the functional requirements of NPP operation. These programs demonstrate that the NPP control room is the visible command/control/communications center of the complex man/machine system that operates the plant. These development programs are primarily plant specific, although the owners' groups and the Institute of Nuclear Power Operations (INPO) do provide some standardization. The Idaho National Engineering Laboratory recently completed a project to categorize control room changes and estimate the degree of change. That project, plus related studies, provides the basis for this image of the next generation of NPP control rooms. The next generation of NPP control rooms is envisioned as being dominated by three current trends: (1) application of state-of-the-art computer hardware and software; (2) use of NPP dynamic analyses to provide the basis for the control room man/machine system design; and (3) application of empirical principles of human performance

  12. Nonlinear Control of Hydraulic Manipulator for Decommissioning Nuclear Reactor

    International Nuclear Information System (INIS)

    Kim, Myoung-Ho; Lee, Sung-Uk; Kim, Chang-Hoi; Choi, Byung-Seon; Moon, Jei-Kwon

    2016-01-01

    Robot technique is need to decommission nuclear reactor because of high radiation environment. Especially, Manipulator systems are useful for dismantling complex structure in a nuclear facility. In addition, Hydraulic system is applied to handle heavy duty object. Since hydraulic system can demonstrate high power. The manipulator with hydraulic power is already developed. To solve this problem, various nonlinear control method includes acceleration control. But, it is difficult because acceleration value is highly noisy. In this paper, the nonlinear control algorithm without acceleration control is studied. To verify, the hydraulic manipulator model had been developed. Furthermore, the numerical simulation is carried out. The nonlinear control without acceleration parameter method is developed for hydraulic manipulator. To verify control algorithm, the manipulator is modeled by MBD and the hydraulic servo system is also derived. In addition, the numerical simulation is also carried out. Especially, PID gain is determined though TDC algorithm. In the result of numerical simulation, tracking performance is good without acceleration control. Thus, the PID though TDC with SMC is good for hydraulic manipulator control

  13. Multivariable control in nuclear power stations -survey of design methods

    International Nuclear Information System (INIS)

    Mcmorran, P.D.

    1979-12-01

    The development of larger nuclear generating stations increases the importance of dynamic interaction between controllers, because each control action may affect several plant outputs. Multivariable control provides the techniques to design controllers which perform well under these conditions. This report is a foundation for further work on the application of multivariable control in AECL. It covers the requirements of control and the fundamental mathematics used, then reviews the most important linear methods, based on both state-space and frequency-response concepts. State-space methods are derived from analysis of the system differential equations, while frequency-response methods use the input-output transfer function. State-space methods covered include linear-quadratic optimal control, pole shifting, and the theory of state observers and estimators. Frequency-response methods include the inverse Nyquist array method, and classical non-interactive techniques. Transfer-function methods are particularly emphasized since they can incorporate ill-defined design criteria. The underlying concepts, and the application strengths and weaknesses of each design method are presented. A review of significant applications is also given. It is concluded that the inverse Nyquist array method, a frequency-response technique based on inverse transfer-function matrices, is preferred for the design of multivariable controllers for nuclear power plants. This method may be supplemented by information obtained from a modal analysis of the plant model. (auth)

  14. Nonlinear Control of Hydraulic Manipulator for Decommissioning Nuclear Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Myoung-Ho; Lee, Sung-Uk; Kim, Chang-Hoi; Choi, Byung-Seon; Moon, Jei-Kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Robot technique is need to decommission nuclear reactor because of high radiation environment. Especially, Manipulator systems are useful for dismantling complex structure in a nuclear facility. In addition, Hydraulic system is applied to handle heavy duty object. Since hydraulic system can demonstrate high power. The manipulator with hydraulic power is already developed. To solve this problem, various nonlinear control method includes acceleration control. But, it is difficult because acceleration value is highly noisy. In this paper, the nonlinear control algorithm without acceleration control is studied. To verify, the hydraulic manipulator model had been developed. Furthermore, the numerical simulation is carried out. The nonlinear control without acceleration parameter method is developed for hydraulic manipulator. To verify control algorithm, the manipulator is modeled by MBD and the hydraulic servo system is also derived. In addition, the numerical simulation is also carried out. Especially, PID gain is determined though TDC algorithm. In the result of numerical simulation, tracking performance is good without acceleration control. Thus, the PID though TDC with SMC is good for hydraulic manipulator control.

  15. Low complication rate of sellar reconstruction by artificial dura mater during endoscopic endonasal transsphenoidal surgery.

    Science.gov (United States)

    Ye, Yuanliang; Wang, Fuyu; Zhou, Tao; Luo, Yi

    2017-12-01

    To evaluate effect of sellar reconstruction during pituitary adenoma resection surgery by the endoscopic endonasal transsphenoidal approach using artificial cerebral dura mater patch.This was a retrospective study of 1281 patients who underwent endoscopic transsphenoidal resection for the treatment of pituitary adenomas between December 2006 and May 2014 at the Neurosurgery Department of the People's Liberation Army General Hospital. The patients were classified into 4 grades according to intraoperative cerebrospinal fluid (CSF) leakage site. All patients were followed up for 3 months by telephone and outpatient visits.One thousand seventy three (83.7%) patients underwent sellar reconstruction using artificial dura matter patched outside the sellar region (method A), 106 (8.3%) using artificial dura matter patched inside the sellar region (method B), and 102 (8.0%) using artificial dura matter and a mucosal flap (method C). Method A was used for grade 0-1 leakage, method B for grade 1 to 2 leakage, and method C for grade 2 to 3 leakage. During the 3-month follow-up, postoperative CSF leakage was observed in 7 patients (0.6%): 2 among patients who underwent method B (1.9%) and 5 among those who underwent method C (4.9%). Meningitis was diagnosed in 13 patients (1.0%): 2 among patients who underwent method A (0.2%), 4 among those who underwent method B (3.8%), and 7 among those who underwent method C (6.7%).Compared with other reconstruction methods, sellar reconstruction surgery that only use artificial dura mater as repair material had a low rate of complications. Copyright © 2017 The Authors. Published by Wolters Kluwer Health, Inc. All rights reserved.

  16. Multilateral controls of nuclear fuel-cycle in Asia

    International Nuclear Information System (INIS)

    Choi, Jor-Shan

    2010-01-01

    To meet increasing energy demand and climate change issues, nuclear energy is expected to expand during the next decades in both developed and developing countries. This expansion, most visibly in Asian countries would no doubt be accompanied with complex and intractable challenges to global peace and security, notably in the back-end of the nuclear fuel cycle. What to do with the growing stocks of spent fuel in existing nuclear programs? And how to reduce proliferation concerns when spent fuels are generated in less stable regions of the world? The answers to these questions may lie in the possibility of multilateral (or regional) control of nuclear materials and technologies in the back-end of nuclear fuel cycle. One of the areas of interest is technology, e.g., spent fuel treatment (reprocessing) for long term sustainability and environmental-friendly disposal of radioactive wastes, as an alternative to directly disposing spent fuel in geologic repository. The other is to seek for regional centers for centralized interim spent fuel storage which can eventually turn into disposal facilities. Such centers could help facilitate the possibilities of spent fuel take-back/take-away from countries located in less stable regions for fix-period storage. (author)

  17. Quality indexes for selecting control materials of the nuclear reactors

    International Nuclear Information System (INIS)

    Martinez-Val, J.M.; Pena, J.; Esteban Naudin, A.

    1981-01-01

    Quality indexes are established and valued for selecting control materials, The requirements for accomplishing such purposes are explained with detailed analysis: absortion cross section must be as high as possible, adequate reactivity evolution versus depletion, good resistance to radiation, appropiate thermal stability, mechanical resistance and ductility, chemical compatibility with the environment, good heat transfer properties, abundant in the nature and low costs. At present Westinghouse desire to commercialize hafnium as control material shows the exciting task of looking for new materials controlling nuclear reactors. (auth.)

  18. Brokdorf nuclear power station: Construction scheduling and deadline control

    International Nuclear Information System (INIS)

    Lembcke, U.D.F.

    1986-01-01

    Scheduling, especially deadline control, for all installations of the Brokdorf nuclear power station was carried out centrally by the Project Management of Kraftwerk Union AG. 130 timetables encompassing some 13,000 activities were handled, which were interconnected and linked to 189 timetables (approx. 18,000 activities) from various specialized sections by means of data processing systems. Much space in time scheduling was taken by controls of software processing, especially of the preliminary inspection documents in the piping sector and of working documents for construction management in the control systems area. (orig.) [de

  19. Establishing control over nuclear materials and radiation sources in Georgia

    International Nuclear Information System (INIS)

    Basilia, G.

    2010-01-01

    Regulatory control over radiation sources in Georgia was lost after disintegration of the Soviet Union. A number of radiation accidents and illegal events occurred in Georgia. From 1999 Nuclear and Radiation Safety Service of the Ministry of Environmental Protection and Natural Resources is responsible for regulatory control over radiation sources in Georgia. US NRC Regulatory Assistance Program in Georgia Assist the Service in establishing long term regulatory control over sources. Main focuses of US NRC program are country-wide inventory, create National Registry of sources, safe storage of disused sources, upgrade legislation and regulation, implementation licensing and inspection activities

  20. Retrofit of safety and control systems in nuclear power plants

    International Nuclear Information System (INIS)

    Keiper, J.T.; Fassett, G.B.

    1986-01-01

    The modularity, compactness, compatibility, and licensability of the microcontrol system make it a cost-effective approach to obtain the benefits of digital control technology in the retrofit of nuclear power plants. Retrofit of individual loops or complete systems can be scheduled to meet the operational needs of the plant. The existing racks, panels, and cable systems can be utilized to the maximum extent to minimize the installed cost. Future expansion to total plant control or plant management is supported by the network communication module or gateway. The microcontrol module provides benefits now in improved operation, and future benefits in planned, controlled upgrading

  1. A device for the hydraulic control of nuclear reactor control rods

    International Nuclear Information System (INIS)

    Frisch, Erling; Frisch, D.R.; Andrews, H.N.

    1974-01-01

    A device for driving and locking the control rods of a nuclear reactor. This device comprises a hydraulic driving piston mounted in a cylinder provided with a construction for absorbing shocks. The piston is provided, at is extremity, with a locking device adapted to engage a stationary lock, it being possible to control the latter for freeing said piston locking device; with such an arrangement, the control rod is normally maintained in position, and it can be freed only by a positive signal. Moreover, the control rod movements are slowed down, so as to prevent the gripping device from being damaged. This device can be used in the nuclear industry [fr

  2. Eficiencia económica en las agencias de viajes tradicionales y online. Una aplicación al mercado español

    OpenAIRE

    Baena Graciá, Verónica; Lacalle Muñoz de Cuerva, Luis

    2014-01-01

    Las nuevas herramientas surgidas gracias a las tecnologías de la información y la comunicación han modificado tanto la gestión interna de las agencias de viajes, como el funcionamiento del propio mercado. Por otro lado, el sector está sufriendo las consecuencias de la crisis económica y como resultado, un gran número de agencias ha desaparecido de la industria de la intermediación turística española en los últimos años. Unido a este hecho, se ha observado que las transacciones realizadas a tr...

  3. Diferencias en la eficiencia técnica de la gestión online y tradicional de las agencias de viajes en España

    OpenAIRE

    Lacalle Muñoz de Cuerva, Luis

    2014-01-01

    Tesis inédita presentada en la Universidad Europea de Madrid. Facultad de Ciencias Sociales. Programa de Doctorado en Economía y Empresa El sector de las agencias de viajes en España está atravesando un periodo de grandes transformaciones. Por un lado las nuevas herramientas surgidas gracias a las tecnologías de la información y la comunicación han modificado tanto la gestión interna de las agencias, como el funcionamiento del propio mercado. Por otro, el sector está sufriendo las consecu...

  4. Agencias de viaje online: situación y perspectivas en el comercio electrónico español

    OpenAIRE

    Garrido Pintado, Pablo

    2011-01-01

    El objeto de esta investigación es el comercio de servicios turísticos a través de Internet en España, concretamente el realizado por las agencias de viajes o portales virtuales. Entendiendo como tales a las agencias independientes de servicios plenos relacionados con el turismo o los portales que ofrecen motores de búsqueda enlazados con los proveedores de plazas del sector. No tienen cabida en este estudio las compañías que ofertan servicios puntuales, caso de las aerolíneas,...

  5. An automated entry control system for nuclear facilities

    International Nuclear Information System (INIS)

    Ream, W.K.; Espinoza, J.

    1985-01-01

    An entry control system to automatically control access to nuclear facilities is described. The design uses a centrally located console, integrated into the regular security system, to monitor the computer-controlled passage into and out of sensitive areas. Four types of entry control points are used: an unmanned enclosed portal with metal and SNM detectors for contraband detection with positive personnel identification, a bypass portal for contraband search after a contraband alarm in a regular portal also with positive personnel identification, a single door entry point with positive personnel identification, and a single door entry point with only a magnetic card-type identification. Security force action is required only as a response to an alarm. The integration of the entry control function into the security system computer is also described. The interface between the entry control system and the monitoring security personnel utilizing a color graphics display with touch screen input is emphasized

  6. Control and automation technology in United States nuclear power plants

    International Nuclear Information System (INIS)

    Sun, B.K.H.

    1997-01-01

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advance of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are (1) to improve safety; (2) to reduce challenges to the power plant; (3) to reduce the cost of operations and maintenance; (4) to enhance power production, and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system and the human task places the human in the correct role in relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs

  7. Control and automation technology in United States nuclear power plants

    International Nuclear Information System (INIS)

    Sun, B.K.H.

    1995-01-01

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advanced of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are: (1) to improve safety; (2) to reduce challenges to capital investments; (3) to reduce the cost of operations and maintenance; (4) to enhance power production; and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system, and the human task places the human in the correct role in the relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs

  8. Control and automation technology in United States nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Sun, B K.H. [Sunutech, Inc., Los Altos, CA (United States)

    1997-07-01

    The need to use computers for nuclear power plant design, engineering, operation and maintenance has been growing since the inception of commercial nuclear power electricity generation in the 1960s. The needs have intensified in recent years as the demands of safety and reliability, as well as economic competition, have become stronger. The rapid advance of computer hardware and software technology in the last two decades has greatly enlarged the potential of computer applications to plant instrumentation and control of future plants, as well as those needed for operation of existing plants. The traditional role of computers for mathematical calculations and data manipulation has been expanded to automate plant control functions and to enhance human performance and productivity. The major goals of using computers for instrumentation and control of nuclear power plants are (1) to improve safety; (2) to reduce challenges to the power plant; (3) to reduce the cost of operations and maintenance; (4) to enhance power production, and (5) to increase productivity of people. Many functions in nuclear power plants are achieved by a combination of human action and automation. Increasingly, computer-based systems are used to support operations and maintenance personnel in the performance of their tasks. There are many benefits which can accrue from the use of computers but it is important to ensure that the design and implementation of the support system and the human task places the human in the correct role in relation to the machine; that is, in a management position, with the computer serving the human. In addition, consideration must be given to computer system integrity, software validation and verification, consequences of error, etc., to ensure its reliability for nuclear power plant applications. (author). 31 refs.

  9. Inventory Control of Spare Parts for Operating Nuclear Power plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

    2006-07-01

    Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea.

  10. Liver phantom for quality control and training in nuclear medicine

    International Nuclear Information System (INIS)

    Lima Ferreira, Fernanda Carla; Nascimento Souza, Divanizia do

    2011-01-01

    In nuclear medicine, liver scintigraphy aims to verify organ function based on the radionuclide concentration in the liver and bile flow and is also used to detect tumors. Therefore it is necessary to perform quality control tests in the gamma camera before running the exam to prevent false results. Quality control tests of the gamma camera should thus be performed before running the exam to prevent false results. Such tests generally use radioactive material inside phantoms for evaluation of gamma camera parameters in quality control procedures. Phantoms can also be useful for training doctors and technicians in nuclear medicine procedures. The phantom proposed here has artifacts that simulate nodules; it may take on different quantities, locations and sizes and it may also be mounted without the introduction of nodules. Thus, its images may show hot or cold nodules or no nodules. The phantom consists of acrylic plates hollowed out in the centre, with the geometry of an adult liver. Images for analyses of simulated liver scintigraphy were obtained with the detector device at 5 cm from the anterior surface of the phantom. These simulations showed that this object is suitable for quality control in nuclear medicine because it was possible to visualize artifacts larger than 7.9 mm using a 256x256 matrix and 1000 kcpm. The phantom constructed in this work will also be useful for training practitioners and technicians in order to prevent patients from repeat testing caused by error during examinations.

  11. Liver phantom for quality control and training in nuclear medicine

    Energy Technology Data Exchange (ETDEWEB)

    Lima Ferreira, Fernanda Carla [Departamento de Fisica, Universidade Federal de Sergipe, Sao Cristovao, SE, 49100 000 (Brazil); Nascimento Souza, Divanizia do, E-mail: divanizi@ufs.br [Departamento de Fisica, Universidade Federal de Sergipe, Sao Cristovao, SE, 49100 000 (Brazil)

    2011-10-01

    In nuclear medicine, liver scintigraphy aims to verify organ function based on the radionuclide concentration in the liver and bile flow and is also used to detect tumors. Therefore it is necessary to perform quality control tests in the gamma camera before running the exam to prevent false results. Quality control tests of the gamma camera should thus be performed before running the exam to prevent false results. Such tests generally use radioactive material inside phantoms for evaluation of gamma camera parameters in quality control procedures. Phantoms can also be useful for training doctors and technicians in nuclear medicine procedures. The phantom proposed here has artifacts that simulate nodules; it may take on different quantities, locations and sizes and it may also be mounted without the introduction of nodules. Thus, its images may show hot or cold nodules or no nodules. The phantom consists of acrylic plates hollowed out in the centre, with the geometry of an adult liver. Images for analyses of simulated liver scintigraphy were obtained with the detector device at 5 cm from the anterior surface of the phantom. These simulations showed that this object is suitable for quality control in nuclear medicine because it was possible to visualize artifacts larger than 7.9 mm using a 256x256 matrix and 1000 kcpm. The phantom constructed in this work will also be useful for training practitioners and technicians in order to prevent patients from repeat testing caused by error during examinations.

  12. Liver phantom for quality control and training in nuclear medicine

    Science.gov (United States)

    Lima Ferreira, Fernanda Carla; Souza, Divanizia do Nascimento

    2011-10-01

    In nuclear medicine, liver scintigraphy aims to verify organ function based on the radionuclide concentration in the liver and bile flow and is also used to detect tumors. Therefore it is necessary to perform quality control tests in the gamma camera before running the exam to prevent false results. Quality control tests of the gamma camera should thus be performed before running the exam to prevent false results. Such tests generally use radioactive material inside phantoms for evaluation of gamma camera parameters in quality control procedures. Phantoms can also be useful for training doctors and technicians in nuclear medicine procedures. The phantom proposed here has artifacts that simulate nodules; it may take on different quantities, locations and sizes and it may also be mounted without the introduction of nodules. Thus, its images may show hot or cold nodules or no nodules. The phantom consists of acrylic plates hollowed out in the centre, with the geometry of an adult liver. Images for analyses of simulated liver scintigraphy were obtained with the detector device at 5 cm from the anterior surface of the phantom. These simulations showed that this object is suitable for quality control in nuclear medicine because it was possible to visualize artifacts larger than 7.9 mm using a 256×256 matrix and 1000 kcpm. The phantom constructed in this work will also be useful for training practitioners and technicians in order to prevent patients from repeat testing caused by error during examinations.

  13. Inventory Control of Spare Parts for Operating Nuclear Power plants

    International Nuclear Information System (INIS)

    Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

    2006-01-01

    Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea

  14. Etnografiando formas de aprendizaje, participación y agencia en la escuela y la mezquita

    Directory of Open Access Journals (Sweden)

    Charo Reyes Izquierdo

    2017-07-01

    Full Text Available A pesar del incremento de alumnado extranjero de la etapa escolar obligatoria en las dos últimas décadas, no se han alcanzado los mismos niveles de incorporación en los estudios postobligatorios. Los análisis de dispositivos pensados para la escolarización de parte del alumnado de nacionalidad extranjera han concluido que, en gran medida, los recursos y dispositivos empleados para conseguir trayectorias de éxito escolar han contribuido a generar procesos de segregación que determinan las posibilidades educativas. Sin embargo, el espacio escolar no es el único entorno de aprendizaje al que accede este alumnado. Hay otros, como es el caso de la mezquita, que también constituyen espacios de experiencias clave de estos chicos y chicas que no han sido abordadas de forma suficiente ni comparativamente en la investigación. El trabajo que aquí se presenta añade una perspectiva comunitaria de las posibilidades de aprendizaje del alumnado inmigrante no investigada en profundidad en el ámbito nacional, siguiendo las perspectivas de autores como Moll y González (2005, Gregory (2008, 2012 y Kenner (2012. En concreto, se presenta una investigación etnográfica que se ha llevado a cabo en dos espacios formativos diferenciados: el aula de acogida en la escuela catalana y la mezquita. Este enfoque comparado ha mostrado algunas de las estrategias que el alumnado de familias de origen marroquí y senegambiano, unos de los colectivos menos representados en la educación postobligatoria, desarrolla en su proceso de aprendizaje, transfiriendo conocimientos desde el ámbito comunitario al ámbito escolar y viceversa, y su impacto en las estrategias identitarias.A través del contraste entre las formas de aprendizaje, la participación o la agencia del alumnado en uno y otro espacio se quiere también avanzar en la reflexión sobre las limitaciones de la estructura escolar tal y como está pensada en la actualidad, y sobre las posibilidades de mejora a

  15. Human factors methods for nuclear control room design. Volume I. Human factors enhancement of existing nuclear control rooms. Final report

    International Nuclear Information System (INIS)

    Seminara, J.L.; Seidenstein, S.; Eckert, S.K.; Smith, D.L.

    1979-11-01

    Human factors engineering is an interdisciplinary specialty concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. Human factors approaches were applied in the design of representative nuclear power plant control panels. First, methods for upgrading existing operational control panels were examined. Then, based on detailed human factors analyses of operator information and control requirements, designs of reactor, feedwater, and turbine-generator control panels were developed to improve the operator-control board interface, thereby reducing the potential for operator errors. In addition to examining present-generation concepts, human factors aspects of advanced systems and of hybrid combinations of advanced and conventional designs were investigated. Special attention was given to warning system designs. Also, a survey was conducted among control board designers to (1) develop an overview of design practices in the industry, and (2) establish appropriate measures leading to a more systematic concern for human factors in control board design

  16. Nuclear power plant control and instrumentation 1982. Proceedings of an international symposium on nuclear power plant control and instrumentation

    International Nuclear Information System (INIS)

    1983-01-01

    Ever increasing demands for nuclear power plant safety and availability imply a need for the introduction of modern measurement and control methods, together with data processing techniques based on the latest advances in electronic components, transducers and computers. Nuclear power plant control and instrumentation is therefore an extremely rapidly developing field. The present symposium, held in Munich, FR Germany, was prepared with the help of the IAEA International Working Group on Nuclear Power Plant Control and Instrumentation and organized in close co-operation with the Gesellschaft fur Reaktorsicherheit, Federal Republic of Germany. A number of developments were highlighted at the Munich symposium: - The increased use of computers can bring clear advantages and this technique is now proven as a tool for supervising and controlling plant operation. Advanced computerized systems for operator support are being developed on a large scale in many countries. The progress in this field is quite obvious, especially in disturbance analysis, safety parameter display, plant operator guidance and plant diagnostics. The new trend of introducing computers and microprocessors in protection systems makes it easy to implement 'defence-in-depth' strategies which give better assurance of correct system responses and also prevent unnecessary reactor trips, thus improving plant availability. The introduction of computerized systems for control of reactor power, reactor water level and reactor pressure as well as for reactor start-up and shut-down could improve the reliability and availability of nuclear power plants. The rapid technical development in the area of control and instrumentation makes it necessary to plan for at least one replacement of obsolete equipment in the course of the 30 years lifetime of a nuclear power plant and retrofitting of currently operating reactors with new control systems. Major design improvements and regulatory requirements also require

  17. Control and accountancy of nuclear materials in a uranium enrichment plant

    International Nuclear Information System (INIS)

    Hurt, N.H.

    1985-01-01

    A nuclear material control and accountancy system has been developed by Goodyear Atomic Corporation to meet safeguards and security requirements. It comprises three major elements: physical security, nuclear material control, and nuclear material accounting. This safeguards system is called Dynamic Material Control and Accountancy System (DYMCAS). The system approaches real-time computer control on a transaction-by-transaction basis

  18. Control technology for nuclear power system of next generation

    International Nuclear Information System (INIS)

    1995-01-01

    This report is the summary of the results obtained by the investigation activities for two years carried out by the expert committee on investigation of control technology for nuclear power system of next generation. The course of investigation is outlined, and as the results, as advanced control technologies, adaptive control. H sub (infinite) control, fuzzy control and the application of autonomous distributed system and genetic algorithm to control; as operation support technology, the operation and monitoring system for nuclear power plants and safety support system; as interface technology which is the basic technology of them, virtual reality, multimedia and so on; further, various problems due to human factors, computer technology, artificial intelligence and others were taken up, and the grasp of the present status and the future subjects was carried out, including the information in international conferences. The items of the investigation are roughly divided into measurement and control technologies, interface technology and operation support, human factors, computer technology and artificial intelligence, and the trend in foreign countries, and the results of investigation for respective items are reported. (K.I.)

  19. Water quality control method and device for nuclear power plant and nuclear power plant

    International Nuclear Information System (INIS)

    Nagase, Makoto; Asakura, Yamato; Uetake, Naoto; Sawa, Toshio; Uchida, Shunsuke; Takeda, Renzo; Osumi, Katsumi.

    1993-01-01

    In a BWR type nuclear power plant, water quality of coolants is controlled so as to lower deposition rate of Co ions in reactor water on a fuel cladding tube. The water quality control method includes (1) decreasing an iron concentration in feedwater to less than 0.1ppb, (2) adjusting coolants weakly acidic and (3) controlling dissolved oxygen concentration in reactor water to 20ppb. This can decrease 60 Co ion concentration even if 60 Co ion concentration is increased by the change of environment for the operation in future, such as an operation with hydrogen injection and extention of fuel burnup degree. (T.M.)

  20. Return on experience on control gates in nuclear power station

    International Nuclear Information System (INIS)

    Valendru, N.

    2009-01-01

    In application of an EDF internal directive, control gates are used at the exit of the Controlled Areas of each nuclear power station site for the radiological control of materials or wastes on pedestrians and vehicles. The author first presents the radiological control chain for people and its principles. This chain comprises the different controls performed within the controlled area, either at the exit of a works area or at the exit of the reactor building, the different controls performed at the exit of the controlled area (depending on the site classification), the control of pedestrians at the site exit, and the 'whole body' anthropo-gamma-metric control. For each of these controls, the authors indicate the detection objectives, the different contamination threshold values, and the type of gate used. In a second part, the authors more precisely present the new C2 gates which include gamma and beta sensors, indicate how control thresholds are adjusted on different power station sites, and discuss the lessons learned after the first years of use of these new gates (difficulties and problems faced as far as detection and detection thresholds are concerned, changes in organization)

  1. Non destructive nuclear measurements for control and characterization purpose

    International Nuclear Information System (INIS)

    Lyoussi, Abdallah

    2002-01-01

    In this report for accreditation to supervise researches, the author proposes a large and rather precise overview of his research works which dealt with the upstream and downstream parts of the nuclear fuel cycle. After having discussed the different needs associated with non destructive nuclear measurements during the fuel cycle, the author describes his past research activities. In the following parts, he discusses control and characterization methods associated with the upstream and downstream parts of the fuel cycle: fuel density variation measurement, non destructive control of uranium-235 content of enriched uranium ingots, examination of induced photo-fissions in radioactive waste parcels, use of electron accelerator for simultaneous neutron and photon examination, measurement of the spatial distribution of the photonic component from the Mini Linatron, association of non destructive measurement techniques

  2. Nuclear materials control and accountability internal audit program

    International Nuclear Information System (INIS)

    Barham, M.A.; Abbott, R.R.

    1991-01-01

    This paper reports that the Department of Energy Order (DOE) 5633.3, Control and Accountability for Nuclear Materials, includes several requirements for development and implementation of an internal audit program. Martin Marietta Energy System, Inc., manages five sites in Tennessee, Kentucky, and Ohio for the DOE Field Office, Oak Ridge and has a Central Nuclear Materials Control and Accountability (NMC and A) Manager with matrixed responsibility for the NMC and A program at the five sites. The Energy Systems Central NMC and A Manager has developed an NMC and A Internal Audit Handbook which defines the functional responsibilities, performance criteria, and reporting and documentation requirements for the Energy Systems NMC and A Internal Audit Program. The initial work to develop and implement these standards was tested at the K-25 Site when the site hired an internal auditor to meet the DOE requirements for an NMC and A Internal Audit program

  3. Robust nonlinear control of nuclear reactors under model uncertainty

    International Nuclear Information System (INIS)

    Park, Moon Ghu

    1993-02-01

    A nonlinear model-based control method is developed for the robust control of a nuclear reactor. The nonlinear plant model is used to design a unique control law which covers a wide operating range. The robustness is a crucial factor for the fully automatic control of reactor power due to time-varying, uncertain parameters, and state estimation error, or unmodeled dynamics. A variable structure control (VSC) method is introduced which consists of an adaptive performance specification (fime control) after the tracking error reaches the narrow boundary-layer by a time-optimal control (coarse control). Variable structure control is a powerful method for nonlinear system controller design which has inherent robustness to parameter variations or external disturbances using the known uncertainty bounds, and it requires very low computational efforts. In spite of its desirable properties, conventional VSC presents several important drawbacks that limit its practical applicability. One of the most undesirable phenomena is chattering, which implies extremely high control activity and may excite high-frequency unmodeled dynamics. This problem is due to the neglected actuator time-delay or sampling effects. The problem was partially remedied by replacing chattering control by a smooth control inter-polation in a boundary layer neighnboring a time-varying sliding surface. But, for the nuclear reactor systems which has very fast dynamic response, the sampling effect may destroy the narrow boundary layer when a large uncertainty bound is used. Due to the very short neutron life time, large uncertainty bound leads to the high gain in feedback control. To resolve this problem, a derivative feedback is introduced that gives excellent performance by reducing the uncertainty bound. The stability of tracking error dynamics is guaranteed by the second method of Lyapunov using the two-level uncertainty bounds that are obtained from the knowledge of uncertainty bound and the estimated

  4. A computerized diagnostic system for nuclear plant control rooms based on statistical quality control

    International Nuclear Information System (INIS)

    Heising, C.D.; Grenzebach, W.S.

    1990-01-01

    In engineering science, statistical quality control techniques have traditionally been applied to control manufacturing processes. An application to commercial nuclear power plant maintenance and control is presented that can greatly improve safety. As a demonstration of such an approach to plant maintenance and control, a specific system is analyzed: the reactor coolant pumps of the St. Lucie Unit 2 nuclear power plant located in Florida. A 30-day history of the four pumps prior to a plant shutdown caused by pump failure and a related fire within the containment was analyzed. Statistical quality control charts of recorded variables were constructed for each pump, which were shown to go out of statistical control many days before the plant trip. The analysis shows that statistical process control methods can be applied as an early warning system capable of identifying significant equipment problems well in advance of traditional control room alarm indicators

  5. Control policies impact on commercial trade in nuclear sector

    International Nuclear Information System (INIS)

    Vatamanu, Mariana; Bugeag, Elena; Ignat Irina

    2004-01-01

    The restructuring of the economic sectors, improvement of the business environment and, implicitly, the development of the appropriate legislative framework correspond to the main objectives of the Work Programme issued by the Government of Romania with view to fulfil the criteria imposed by the European Commission for the accession of Romania to European Union planned for the year 2007. One of the legislative package section, being under revision of the Legislative Chamber of Romania, is referring to power sector, where remarkable efforts are made in connection with energy and gas market liberalization towards 40% opening, correction applied to the thermal and electric power and gas tariffs, with a view to get fully cover of the production costs, start up of the privatisation process for some of the distribution companies and all these represent part of the main priorities of the Romanian government for the restructuring of the power sector. SN Nuclearelectrica SA - SNN SA - has as domain of its main activities the development of the nuclear program in Romania regarding: Cernavoda Unit 1 operation for production and delivery of electric power to the National Grid (since 1996), the nuclear fuel fabrication at Nuclear Fuel Plant in Pitesti, the completion and commissioning of the Cernavoda Unit 2 and start up, in the near future, of the work for Unit 3 completion. The trade activity within the power production sector using nuclear fuel is governed, due to its specific, by the rules and laws of Romania and are also subject of the international rules related to the foreign trade and, particularly to the policy of transaction of the special materials on international market. This category of special materials, named strategic materials with dual use, are under the control of the National Agency for Export Control - ANCEX, as well as other specialised and dedicated Romanian authorities, as: National Commission for the Nuclear Activities Control - CNCAN, specialized

  6. Kynurenine aminotransferase in the supratentorial dura mater of the rat: effect of stimulation of the trigeminal ganglion.

    Science.gov (United States)

    Knyihár-Csillik, Elizabeth; Chadaide, Zoltán; Okuno, Etsuo; Krisztin-Péva, Beata; Toldi, József; Varga, Csaba; Molnár, Andor; Csillik, Bert; Vécsei, László

    2004-04-01

    Electrical stimulation of the trigeminal ganglion has been widely used as a model of nociception, characterizing migraine. This treatment is known to evoke release of neuropeptides and neurotransmitters from nerve fibers of the dura mater. On the basis of immunocytochemical investigations, we found that under normal conditions, surface membranes of Schwann cells surrounding nerve fibers in the supratentorial dura mater display kynurenine aminotransferase-immunoreaction (KAT-IR); also KAT-IR are the granules of mast cells and the cytoplasms of macrophages (histiocytes). In consequence of stimulation of the trigeminal ganglion, Schwann cells in the dura mater became conspicuously swollen while their KAT-IR decreased considerably; also KAT-IR of mast cells and macrophages decreased significantly. At the same time, nitric oxide synthase (NOS)-IR of nerve fibers in the dura mater increased, suggesting release of nitric oxide (NO), this is known to be involved in NMDA receptor activation leading to vasodilation followed by neurogenic inflammation. Because kynurenic acid (KYNA) is an antagonist of NMDA receptors, we hypothesize that KYNA and its synthesizing enzyme, KAT, may play a role in the prevention of migraine attacks.

  7. Muusikapassioon mõttepeeglis. Täna kõlab "Stabat Mater" / Anne Peäske

    Index Scriptorium Estoniae

    Peäske, Anne, 1946-

    2005-01-01

    Arvo Pärdi "Passio" ettekandest 11.sept. Rakvere Kolmainu kirikus. Elmo Lööve, Raivo Palmaru, Jaan Rääts, Toivo Tulev, Aarne Talvik, Ingmar Kurg, Olev Oja ja Eleonora Pärt Arvo Pärdi muusikast. A. Pärdi "Stabat Mater" ansambli Theatre of Voices esituses 14. sept. Rakvere Kolmainu kirikus

  8. Nuclear

    International Nuclear Information System (INIS)

    2014-01-01

    This document proposes a presentation and discussion of the main notions, issues, principles, or characteristics related to nuclear energy: radioactivity (presence in the environment, explanation, measurement, periods and activities, low doses, applications), fuel cycle (front end, mining and ore concentration, refining and conversion, fuel fabrication, in the reactor, back end with reprocessing and recycling, transport), the future of the thorium-based fuel cycle (motivations, benefits and drawbacks), nuclear reactors (principles of fission reactors, reactor types, PWR reactors, BWR, heavy-water reactor, high temperature reactor of HTR, future reactors), nuclear wastes (classification, packaging and storage, legal aspects, vitrification, choice of a deep storage option, quantities and costs, foreign practices), radioactive releases of nuclear installations (main released radio-elements, radioactive releases by nuclear reactors and by La Hague plant, gaseous and liquid effluents, impact of releases, regulation), the OSPAR Convention, management and safety of nuclear activities (from control to quality insurance, to quality management and to sustainable development), national safety bodies (mission, means, organisation and activities of ASN, IRSN, HCTISN), international bodies, nuclear and medicine (applications of radioactivity, medical imagery, radiotherapy, doses in nuclear medicine, implementation, the accident in Epinal), nuclear and R and D (past R and D programmes and expenses, main actors in France and present funding, main R and D axis, international cooperation)

  9. Ergonomics in the licensing and evaluation of nuclear reactors control room; A ergonomia no licenciamento e na avaliacao de salas de controle de reatores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Isaac Jose Antonio Luquetti dos [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil); Vidal, Mario Cesar Rodriguez [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia de Producao

    2002-07-01

    A nuclear control room is a complex system that controls a thermodynamic process used to produce electrical energy. The operators interact with the control room through interfaces that have significant implications to nuclear plant safety and influence the operator activity. The TMI (Three Mile Island) accident demonstrated that only the anthropometric aspects were not enough for an adequate nuclear control room design. The studies showed that the accident was aggravated because the designers had not considered adequately human factor aspects. After TMI accident, the designers introduce in the nuclear control room development only human factors standards and human factors guidelines. The ergonomics approaches was not considered. Our objective is introduce in nuclear control room design and nuclear control room evaluation, a methodology that. includes human factors standards, human factors guidelines and ergonomic approaches, the operator activity analysis. (author)

  10. Methods of Verification, Accountability and Control of Special Nuclear Material

    International Nuclear Information System (INIS)

    Stewart, J.E.

    1999-01-01

    This session demonstrates nondestructive assay (NDA) measurement, surveillance and analysis technology required to protect, control and account (MPC and A) for special nuclear materials (SNM) in sealed containers. These measurements, observations and analyses comprise state-of-the art, strengthened, SNM safeguards systems. Staff member specialists, actively involved in research, development, training and implementation worldwide, will present six NDA verification systems and two software tools for integration and analysis of facility MPC and A data

  11. Robotic control architecture development for automated nuclear material handling systems

    International Nuclear Information System (INIS)

    Merrill, R.D.; Hurd, R.; Couture, S.; Wilhelmsen, K.

    1995-02-01

    Lawrence Livermore National Laboratory (LLNL) is engaged in developing automated systems for handling materials for mixed waste treatment, nuclear pyrochemical processing, and weapon components disassembly. In support of these application areas there is an extensive robotic development program. This paper will describe the portion of this effort at LLNL devoted to control system architecture development, and review two applications currently being implemented which incorporate these technologies

  12. Hot rolled composite billet for nuclear control rods

    International Nuclear Information System (INIS)

    Miller, G.E.

    1976-01-01

    This invention relates to a composite plate shaped billet, useful in the fabrication of nuclear control rods, which comprises a core of stainless steel containing about 2 percent boron 10, a thin coating of zirconia on the surfaces of said core, and said zirconia coating being completely encased in a jacket of mild steel, said composite having been hot rolled between about 1075 0 and about 1165 0 C. 1 claim, 8 figures

  13. Plasma physics and controlled nuclear fusion research 1990. V. 1

    International Nuclear Information System (INIS)

    1991-01-01

    Volume 1 of the Proceedings of the Thirteenth International Conference on Plasma Physics and Controlled Nuclear Fusion Research contains papers given in two of the sessions: A and E. Session A contains the Artsimovich Memorial Lecture and papers on tokamaks; session E papers on plasma heating and current drive. The titles and authors of each paper are listed in the Contents. Abstracts accompany each paper. Refs, figs and tabs

  14. Conventional arms control and the nuclear weapons dilemma in Europe

    International Nuclear Information System (INIS)

    Hopmann, P.T.

    1988-01-01

    This paper sets forth some fundamental propositions about the role of conventional arms control in connection with the nuclear weapons dilemma in Europe. A fundamental underlying premise of this analysis is that nuclear and non-nuclear issues in European security are inextricably linked with one another. Therefore, they should not be separated either conceptually or at the level of policy analysis and prescription. An additional basic assumption is that the attainment of an appropriate security regime in Europe is hindered by the security dilemma, in which measures that enhance the security of one side in the East-West conflict are often perceived by the other as detracting from their own security. Therefore, a regime intended to enhance common security throughout the continent must be designed so as to reduce rather than exacerbate this dilemma. The analysis of the requirements for confidence-building measures and arms control rests on several propositions that have been introduced by numerous other authors in this volume. These propositions will be summarized here briefly in order to lay the foundation for the subsequent analysis of confidence-building and arms control initiatives

  15. Safety implications of computerized process control in nuclear power plants

    International Nuclear Information System (INIS)

    1991-02-01

    Modern nuclear power plants are making increasing use of computerized process control because of the number of potential benefits that accrue. This practice not only applies to new plants but also to those in operation. Here, the replacement of both conventional process control systems and outdated computerized systems is seen to be of benefit. Whilst this contribution is obviously of great importance to the viability of nuclear electricity generation, it must be recognized that there are major safety concerns in taking this route. However, there is the potential for enhancing the safety of nuclear power plants if the full power of microcomputers and the associated electronics is applied correctly through well designed, engineered, installed and maintained systems. It is essential that areas where safety can be improved be identified and that the pitfalls are clearly marked so that they can be avoided. The deliberations of this Technical Committee Meeting are a step on the road to this goal of improved safety through computerized process control. This report also contains the papers presented at the technical committee meeting by participants. A separate abstract was prepared for each of these 15 presentations. Refs, figs and tabs

  16. standards used for quality control of nuclear fuels

    International Nuclear Information System (INIS)

    Guereli, L; Can, S.

    1997-01-01

    Nuclear fuels and fuel materials are subject to stringent restrictions as to their quality. The standards and regulations that apply vary according to reactor type and country and the standards are stated in the quality assurance documents. The concept of quality assurance has altered the conventional quality control tests and procedures, defining which control tests are to be applied and how. Although most of the tests and measurements allow the determination of tolerances to be decided according to the agreement between the buyer and the seller, exacting procedures apply to which instruments and equipment are used for these tests and measurements, how these instruments are standardized.Detailed explanations of test methods and their documentation is a requirement in all standards. The purpose of this work is to study which standards, tests and measurements apply to the nuclear fuel production. Only the standards that apply to various stages of the nuclear fuel production (powder preparation, pellet production, fuel element and fuel assembly fabrication) are reviewed. Process and documentation control, design and licensing requirements and the frequency of inspections are quality assurance subjects. Some ASTM standards are given as examples

  17. Quality control of stainless steel pipings for nuclear power generation

    International Nuclear Information System (INIS)

    Miki, Minoru; Kitamura, Ichiro; Ito, Hisao; Sasaki, Ryoichi

    1979-01-01

    The proportion of nuclear power in total power generation is increasing recently in order to avoid the concentrated dependence on petroleum resources, consequently the reliability of operation of nuclear power plants has become important. In order to improve the reliability of plants, the reliability of each machine or equipment must be improved, and for the purpose, the quality control at the time of manufacture is the important factor. The piping systems for BWRs are mostly made of carbon steel, and stainless steel pipings are used for the recirculation system cooling reactors and instrumentation system. Recently, grain boundary type stress corrosion cracking has occurred in the heat-affected zones of welded stainless steel pipings in some BWR plants. In this paper, the quality control of stainless steel pipings is described from the standpoint of preventing stress corrosion cracking in BWR plants. The pipings for nuclear power plants must have sufficient toughness so that the sudden rupture never occurs, and also sufficient corrosion resistance so that corrosion products do not raise the radioactivity level in reactors. The stress corrosion cracking occurred in SUS 304 pipings, the factors affecting the quality of stainless steel pipings, the working method which improves the corrosion resistance and welding control are explained. (Kako, I.)

  18. Device for controlling water supply to nuclear reactor

    International Nuclear Information System (INIS)

    Iwasaki, Toshio.

    1974-01-01

    Object: To smoothly control automatic water supply for realizing stable operation of a nuclear reactor by providing a flow rate limiting signal selection circuit and a preferential circuit in a water supply control device for a nuclear reactor wherein the speed of a recirculation pump may be changed in two-steps. Structure: Opening angle signals for a water supply regulating valve are controlled by a nuclear reactor water level signal, a vapor flow rate signal and a supplied water flow rate signal through an adder and an adjuster in response to a predetermined water level setting signal. When the water in the reactor is maintained at a predetermined level, a selection circuit receives a water pump condition signal for selecting one of the signals from a supplied water rate limiting signal generator generating signals for indicating whether one or two water supply pumps are operated. A low value preferential circuit passes the lower of the values generated from the selection circuit and the adder. The selection circuit receives a recirculation pump condition signal and selects either one of the signals from the supplied water flow rate limiting signal generator operated at high speed or low speed. A high value preferential circuit passes the higher value

  19. Safety in the nuclear era. Politics - strategy - arms control

    International Nuclear Information System (INIS)

    Siebel, G.

    1988-01-01

    Details are given on safety and the factors specifying safety in Europe; the history of the NATO and development of an alliance of sovereign states; nuclear deterrence - the politico-strategic standard of the nuclear era; the East/West struggle for military power; co-operative arms control - theory and practice of stability in the nuclear era; alternative schemes and models; SDI and EURECA - present and future chances and risks. The world is at the beginning of a fascinating development likely to be culminating in the control over and utilization of space, and the mastering of various technical problems be they of a civil or military nature. It remains to be seen whether man will be able to handle the new additional technical capacities in an ethically and politically responsible way. Be that as it may, political scepticism and negative reactions will not succeed in blocking the dynamic forces inherent in the development described. This is especially true for SDI and EURECA. Both schemes are full of both chances and risks. While chances ought to be made the most of risks must be controlled through policies guided by reason. (orig./HSCH) [de

  20. Control of nuclear β-dystroglycan content is crucial for the maintenance of nuclear envelope integrity and function.

    Science.gov (United States)

    Vélez-Aguilera, Griselda; de Dios Gómez-López, Juan; Jiménez-Gutiérrez, Guadalupe E; Vásquez-Limeta, Alejandra; Laredo-Cisneros, Marco S; Gómez, Pablo; Winder, Steve J; Cisneros, Bulmaro

    2018-02-01

    β-Dystroglycan (β-DG) is a plasma membrane protein that has ability to target to the nuclear envelope (NE) to maintain nuclear architecture. Nevertheless, mechanisms controlling β-DG nuclear localization and the physiological consequences of a failure of trafficking are largely unknown. We show that β-DG has a nuclear export pathway in myoblasts that depends on the recognition of a nuclear export signal located in its transmembrane domain, by CRM1. Remarkably, NES mutations forced β-DG nuclear accumulation resulting in mislocalization and decreased levels of emerin and lamin B1 and disruption of various nuclear processes in which emerin (centrosome-nucleus linkage and β-catenin transcriptional activity) and lamin B1 (cell cycle progression and nucleoli structure) are critically involved. In addition to nuclear export, the lifespan of nuclear β-DG is restricted by its nuclear proteasomal degradation. Collectively our data show that control of nuclear β-DG content by the combination of CRM1 nuclear export and nuclear proteasome pathways is physiologically relevant to preserve proper NE structure and activity. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Design of coordinated controller in nuclear power plant based on digital instrument and control technology

    International Nuclear Information System (INIS)

    Cheng Shouyu; Peng Minjun; Liu Xinkai; Zhao Qiang; Deng Xiangxin

    2014-01-01

    Nuclear power plant (NPP) is a multi-input and multi-output, no-linear and time-varying complex system. The conventional PID controller is usually used in NPP control system which is based on analog instrument. The system parameters are easy to overshoot and the response time is longer in the control mode of the conventional PID. In order to improve this condition, a new coordinated control strategy which is based on expert system and the original controllers in the digital instrument and control technology was presented. In order to verify and validate it, the proposed coordinated control technology was tested by the full-scope real-time simulation system. The results prove that using digital instrument and control technology to achieve coordinated controller is feasible, the coordinated controller can effectively improve the dynamic operating characteristics of the system, and the coordinated controller is superior to the conventional PID controller in control performance. (authors)

  2. Chapter 10. Multinational and international controls. Paper 18. Nuclear proliferation: arrangements for international control

    International Nuclear Information System (INIS)

    Rotblat, J.

    1979-01-01

    In the context of nuclear proliferation, the role of Third World countries is crucial since they constitute the great majority of nations, but only a few of them have as yet decided on their future energy programmes. Both the IAEA and the nuclear energy industries are urging them to opt for nuclear power. This is undesirable, because nuclear energy is an unsuitable energy source for most of these countries; it would create a new economic dependence on industrialized countries and would greatly increase the dangers of a nuclear war. To counteract this, measures are needed (a) to encourage Third World countries to meet their energy need from sources other than nuclear ones; (b) to reduce pressures on countries to acquire nuclear reactors; and (c) to eliminate the threat of new hegemonies to countries that already have nuclear power. To achieve this, it is proposed that two new international organizations be set up. One, a World Energy Organization (WEO), would be a specialized agency of the United Nations, with functions similar to those of WHO or FAO but with sufficient funds to make loans to individual countries which accept WEO's advice about their energy programmes. The second, an International Nuclear Fuel Agency (INFA), would be the sole authority to operate enrichment, fuel fabrication, reprocessing and waste disposal plants. Organizationally, it could be part of the IAEA, but the latter would have to separate its promotional and safeguarding activities. An amendment to the NPT would be needed to oblige all countries both nuclear and non-nuclear weapon states, equally to accept INFA controls. (author)

  3. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    International Nuclear Information System (INIS)

    Kim, Hyun Chul

    2011-01-01

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water reactor power plants

  4. Development of Computer-Aided Learning Programs on Nuclear Nonproliferation and Control

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Chul [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2011-10-15

    The fulfillment of international norms for nuclear nonproliferation is indispensable to the promotion of nuclear energy. The education and training for personnel and mangers related to the nuclear material are one of crucial factors to avoid unintended non-compliance to international norms. Korea Institute of Nuclear Nonproliferation and Control (KINAC) has been providing education and training on nuclear control as its legal duty. One of the legally mandatory educations is 'nuclear control education' performed since 2006 for the observation of the international norms on nuclear nonproliferation and the spread of the nuclear control culture. The other is 'physical protection education' performed since 2010 for maintaining the national physical protection regime effectively and the spread of the nuclear security culture. The 2010 Nuclear Security Summit was held in Washington, DC to enhance international cooperation to prevent nuclear terrorism. During the Summit, the South Korea was chosen to host the second Nuclear Summit in 2012. South Korean President announced that South Korea would share its expertise and support the Summit's mission by setting up an international education and training center on nuclear security in 2014. KINAC is making a full effort to set up the center successfully. An important function of the center is education and training in the subjects of nuclear nonproliferation, nuclear safeguards, nuclear security, and nuclear export/import control. With increasing importance of education and training education on nuclear nonproliferation and control, KINAC has been developing computer-aided learning programs on nuclear nonproliferation and control to overcome the weaknesses in classroom educations. This paper shows two learning programs. One is an e-learning system on the nuclear nonproliferation and control and the other is a virtual reality program for training nuclear material accountancy inspection of light water

  5. Report on nuclear power plant instrumentation and control in Germany

    International Nuclear Information System (INIS)

    Bastl, W.

    1992-01-01

    The paper describes the status of the NPP control and instrumentation in Germany. The general technology underlying most aspects of NPP C and I in Germany has not altered since the last progress report although there has been many improvements in detail. Since the beginning of 1990 the GRS carried out the safety investigations of NPPs in East Germany. The USSR as the vendor of the plants and France were also involved in the project. The following fields are briefly described: Status of nuclear power in Germany; training simulators; backfitting of computers and information systems; operator support/new control rooms. (author). 6 refs, 1 tab

  6. Controlled nuclear fusion. Theoretical and technical-physical aspects

    International Nuclear Information System (INIS)

    Donne, T.; Oomens, N.

    1995-01-01

    It is stated that the realization of controlled fusion is not only a matter of solving technical problems. Also theoretical research in the field of plasma physics is required. A brief state-of-the-art is given of theoretical and technical-physical aspects of nuclear fusion. Attention is paid to magnetic confinement, the importance of theoretical research, plasma heating, plasma diagnostics, and the control of plasma transport. Throughout the article special attention is paid to the International Thermonuclear Experimental Reactor (ITER) project. 5 figs., 1 tab., 3 refs

  7. A remotely controlled CCTV system for nuclear reactor retube operations

    International Nuclear Information System (INIS)

    Stovman, J.A.

    1984-01-01

    This paper describes the CCTV Vault Observation Subsystem (VOS) under development for Ontario Hydro for the Pickering 'A' Nuclear Power Plant Large Scale Retubing program. This subsystem will be used by a supervisor and several operators to observe fuel channel replacement operations following plant shutdown and removal of the fuel bundles. VOS basically comprises 23 monochrome television camera driven circuits, a matrix switcher, 15 monitors, 9 tape recorders and 4 microphone driven sound circuits. Remote control of the camera's zoom lenses and mounts is via a digitally multiplexed control system. Design considerations include viewing requirements, reliability, radiation, redundance, and economic factors

  8. Supervision and atuomatic control of robotics systems in nuclear environments

    International Nuclear Information System (INIS)

    Benner, J.; Leinemann, K.

    1992-01-01

    The paper describes new developments in controlling remote handling systems for nuclear applications. The main emphasis is to use robotic equipment and methods for reaching a high degree of system autonomy. A remote handling workstation concept is described, supporting various stages of mission planning and supervision by means of suited geometrical, procedural and functional models. The presented control system enables easy switching between semi-autonomous and manual task execution and sensor data integration. Some experimental results of a prototypic implementation are also described

  9. Supervision and automatic control of robotic systems in nuclear environments

    International Nuclear Information System (INIS)

    Benner, J.; Leinemann, K.

    1992-01-01

    This paper describes new developments in controlling remote handling systems for nuclear applications. The main emphasis is to use robotic equipment and methods for reaching a high degree of system autonomy. A remote handling workstation concept is described, supporting various stages of mission planning and supervision by means of suited geometrical, procedural and functional models. The presented control system enables easy switching between semi-autonomous and manual task execution and sensor data integration. Some experimental results of a prototypic implementation are also described

  10. Control room systems design for nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This publication provides a resource for those who are involved in researching, managing, conceptualizing, designing, manufacturing or backfitting power plant control room systems. It will also be useful to those responsible for performing reviews or evaluations of the design and facilities associated with existing power plant control room systems. The ultimate worth of the publication, however, will depend upon how well it can support its users. Readers are invited to provide comments and observations to the IAEA, Division of Nuclear Power. If appropriate, the report will subsequently be re-issued, taking such feedback into account. Refs, figs and tabs.

  11. Advanced instrumentation and control techniques for nuclear power plants

    International Nuclear Information System (INIS)

    Hayakawa, Hiroyasu; Makino, Maomi

    1989-01-01

    Toshiba has been promoting the development and improvement of control and instrumentation (C and I) systems employing the latest technologies, to fulfill the requirements of nuclear power plants for increased reliability, the upgrading of functions, improved maintainability, and reasonable cost. Such development has been systematically performed based on a schematic view of integrated digital control and instrumentation systems, actively adopting state-of-the-art techniques such as the latest man-machine interfaces, digital and optical multiplexing techniques, and artificial intelligence. In addition, comprehensive feedback has been obtained from the accumulation of operating experience. This paper describes the purpose, contents and status of applications of representative newly-developed systems. (author)

  12. Control room systems design for nuclear power plants

    International Nuclear Information System (INIS)

    1995-07-01

    This publication provides a resource for those who are involved in researching, managing, conceptualizing, designing, manufacturing or backfitting power plant control room systems. It will also be useful to those responsible for performing reviews or evaluations of the design and facilities associated with existing power plant control room systems. The ultimate worth of the publication, however, will depend upon how well it can support its users. Readers are invited to provide comments and observations to the IAEA, Division of Nuclear Power. If appropriate, the report will subsequently be re-issued, taking such feedback into account. Refs, figs and tabs

  13. Automated control system for the Temelin nuclear power plant

    International Nuclear Information System (INIS)

    Labik, V.

    1990-01-01

    Instrumentation of the automated control system of the Temelin nuclear power plant in the section of the main production unit and of the major auxiliary equipment is described, the results of testing are reported, and the present status of design activities is assessed. The suitability of application of Czechoslovak automation facilities to the instrumentation of the automated control system of the power plant was confirmed by the Soviet designer and supplier based on favorable results of polygonal testing. Capacity problems in the development of the designs and user software are alleviated by extensive cooperation. It is envisaged that all tasks will be fulfilled as planned. (P.A.). 1 fig., 5 refs

  14. Advanced control room design for nuclear power plants

    International Nuclear Information System (INIS)

    Scarola, K.

    1987-01-01

    The power industry has seen a continuous growth of size and complexity of nuclear power plants. Accompanying these changes have been extensive regulatory requirements resulting in significant construction, operation and maintenance costs. In response to related concerns raised by industry members, Combustion Engineering developed the NUPLEX 80 Advanced Control Room. The goal of NUPLEX 80 TM is to: reduce design and construction costs; increase plant safety and availability through improvements in the man-machine interface; and reduce maintenance costs. This paper provides an overview of the NUPLEX 80 Advanced Control Room and explains how the stated goals are achieved. (author)

  15. Nuclear power control system design using genetic algorithm

    International Nuclear Information System (INIS)

    Lee, Yoon Joon; Cho, Kyung Ho

    1996-01-01

    The genetic algorithm(GA) is applied to the design of the nuclear power control system. The reactor control system model is described in the LQR configuration. The LQR system order is increased to make the tracking system. The key parameters of the design are weighting matrices, and these are usually determined through numerous simulations in the conventional design. To determine the more objective and optimal weightings, the improved GA is applied. The results show that the weightings determined by the GA yield the better system responses than those obtained by the conventional design method

  16. The control of base nuclear installations; Le controle des installations nucleaires de base (INB)

    Energy Technology Data Exchange (ETDEWEB)

    Anon

    2009-04-15

    The Authority of Nuclear Safety ( A.S.N). presents in this column the current events of the control of the nuclear base installations during november, december 2008 and january 2009, classified by nuclear site. This information is also available in real-time on the A.S.N. web site, www.asn.fr, in the column 'news'. We can consult all the notices of significant incident published as well as the following letters of inspection, the notices of information about the reactors shutdown, press releases and the A.S.N. information notes. (N.C.)

  17. A organizaçâo contabilística no sector conserveiro entre o final do século XIX e a primeira metade do século XX: o caso Júdice Fialho = The accounting model in the Portuguese canned-fish industry between the end of the 19th century and the first...

    Directory of Open Access Journals (Sweden)

    Ana Rita Faria

    2011-12-01

    evolution of accounting practices in Portugal, namely studies based on the analysis of surviving business records of firms, justifies this study.The study concludes that, in the absence of a set of accounting principles and procedures available to all enterprises, the management of Júdice Fialho sought to adopt, from within the varied material available at the time, those accounting techniques which were most relevant to their business operations and actual needs at that time. During the period under examination, the company’s accounting records did not suffer significant changes. The formation as a partnership in 1938, four years after the death of its founder, could have acted has a stimulus for change, but that didn’t happen.Este estudo tem por objectivo analisar a organização contabilística de uma das maiores empresas da indústria de conservas de peixe portuguesa, a Júdice Fialho, entre o final do século XIX e a primeira metade do século XX. Pretende ainda confrontar a organização contabilística existente na empresa com os modelos divulgados na literatura contabilística portuguesa publicada no mesmo período.A justificação para a sua realização residiu na escassez de estudos baseados na análise de registos contabilísticos originais e na disponibilidade, no Arquivo Histórico do Museu Municipal de Portimão (Algarve, de documentação contabilística relativa a esta grande empresa. O estudo conclui que, na ausência de um conjunto de regras e princípios de Contabilidade comuns as todas as empresas, a Júdice Fialho procurou adoptar, considerando a diversidade de soluções contabilísticas divulgadas na literatura da especialidade, a mais adequada às suas características e necessidades reais. A contabilidade da empresa está organizada para fornecer informação sobre os resultados particulares de cada segmento organizacional (fábrica, secção, oficina, depósito, … e não sobre os lucros ou prejuízos obtidos na venda dos diversos produtos

  18. Pulsed estrogen therapy prevents post-OVX porcine dura mater microvascular network weakening via a PDGF-BB-dependent mechanism.

    Directory of Open Access Journals (Sweden)

    Olga V Glinskii

    Full Text Available In postmenopausal women, estrogen (E2 deficiencies are frequently associated with higher risk of intracranial hemorrhage, increased incidence of stroke, cerebral aneurysm, and decline in cognitive abilities. In younger postpartum women and those using oral contraceptives, perturbations in E2 are associated with higher risk of cerebral venous thrombosis. A number of serious intracranial pathologic conditions linked to E2 deficiencies, such as dural sinus thrombosis, dural fistulae, non-parenchymal intracranial hemorrhages, migraines, and spontaneous cerebrospinal fluid leaks, involve the vessels not of the brain itself, but of the outer fibrous membrane of the brain, the dura mater (DM. The pathogenesis of these disorders remains mysterious and how estrogen regulates structural and functional integrity of DM vasculature is largely unknown. Here, we demonstrate that post ovariectomy (OVX DM vascular remodeling is manifested by microvessel destabilization, capillary rarefaction, increased vascular permeability, and aberrant angio-architecture, and is the result of disrupted E2-regulated PDGF-BB signaling within dura microvasculature. These changes, associated with the reduction in systemic PDGF-BB levels, are not corrected by a flat-dose E2 hormone replacement therapy (HRT, but are largely prevented using HRT schedules mimicking physiological E2 fluctuations. We demonstrate that 1 E2 regulates PDGF-BB production by endothelial cells in a dose-dependent manner and 2 optimization of PDGF-BB levels and induction of robust PDGF-mediated endothelial cell-vascular pericyte interactions require high (estrous E2 concentrations. We conclude that high (estrous levels of E2 are important in controlling PDGF-mediated crosstalk between endothelial cells and pericytes, a fundamental mechanism governing microvessel stability and essential for preserving intracranial homeostasis.

  19. Survey procedure: Control and accountability of nuclear materials

    International Nuclear Information System (INIS)

    Van Ness, H.

    1987-02-01

    This procedure outlines the method by which the Department of Energy (DOE) San Francisco Operations Office (SAN) will plan and execute periodic field surveys of the Material Control and Accountability (MC and A) program and practices at designated contractors' facilities. The surveys will be conducted in accordance with DOE Order 5630.7, Control and Accountability of Nuclear Materials Surveys (7/8/81) to ascertain compliance with applicable DOE Orders and SAN Management Directives in the 5630 series, as well as the adequacy of the contractor's program and procedures. Surveys will be conducted by the Safeguards and Security Division of DOE-SAN. The survey team will review and evaluate the adequacy of the contractor's procedures and practices for nuclear material control and accounting by means of physical inventory, internal control, measurement and statistics, material control indicators, records and reports, and personnel training. The survey will include an audit of records and reports, observation of inventory procedures, an independent test of the inventory and a review and evaluation of the inventory differences, accidental losses, and normal operational losses as applicable to the facility to be surveyed

  20. Control of electron spin decoherence in nuclear spin baths

    Science.gov (United States)

    Liu, Ren-Bao

    2011-03-01

    Nuclear spin baths are a main mechanism of decoherence of spin qubits in solid-state systems, such as quantum dots and nitrogen-vacancy (NV) centers of diamond. The decoherence results from entanglement between the electron and nuclear spins, established by quantum evolution of the bath conditioned on the electron spin state. When the electron spin is flipped, the conditional bath evolution is manipulated. Such manipulation of bath through control of the electron spin not only leads to preservation of the center spin coherence but also demonstrates quantum nature of the bath. In an NV center system, the electron spin effectively interacts with hundreds of 13 C nuclear spins. Under repeated flip control (dynamical decoupling), the electron spin coherence can be preserved for a long time (> 1 ms) . Thereforesomecharacteristicoscillations , duetocouplingtoabonded 13 C nuclear spin pair (a dimer), are imprinted on the electron spin coherence profile, which are very sensitive to the position and orientation of the dimer. With such finger-print oscillations, a dimer can be uniquely identified. Thus, we propose magnetometry with single-nucleus sensitivity and atomic resolution, using NV center spin coherence to identify single molecules. Through the center spin coherence, we could also explore the many-body physics in an interacting spin bath. The information of elementary excitations and many-body correlations can be extracted from the center spin coherence under many-pulse dynamical decoupling control. Another application of the preserved spin coherence is identifying quantumness of a spin bath through the back-action of the electron spin to the bath. We show that the multiple transition of an NV center in a nuclear spin bath can have longer coherence time than the single transition does, when the classical noises due to inhomogeneous broadening is removed by spin echo. This counter-intuitive result unambiguously demonstrates the quantumness of the nuclear spin bath