Earthquake response of steel braces and braced steel frames

OpenAIRE

Gan, Wenshui

1996-01-01

This thesis consists of three parts. Chapter 2 deals with the dynamic buckling behavior of steel braces under cyclic axial end displacement. Braces under such a loading condition belong to a class of "acceleration magnifying" structural components, in which a small motion at the loading points can cause large internal acceleration and inertia. This member-level inertia is frequently ignored in current studies of braces and braced structures. This chapter shows that, under certain conditions, ...

Corrective Bracing for Severe Idiopathic Scoliosis in Adolescence: Influence of Brace on Trunk Morphology

Directory of Open Access Journals (Sweden)

Edyta Kinel

2012-01-01

Full Text Available Aim. The aim of the work was to study whether wearing a corrective brace by adolescent girls with severe idiopathic scoliosis can influence external shape of the trunk. Methods. Comparison of clinical deformity of two groups of girls matched for age and Cobb angle: group (1 of 23 girls, aged 14.9±1.3 years, Cobb angle 55.0°±6.8°, who refused surgical treatment and have been wearing Chêneau brace for more than 6 months, compared with group (2 of 22 girls, aged 14.1±1.8 years, Cobb angle 59.7°±14.6° never treated with corrective bracing. Clinical deformity was assessed with the Bunnell scoliometer (angle of trunk rotation ATR and surface topography (posterior trunk symmetry index POTSI and Hump Sum HS. Results. The ATR in the primary curvature was 11.9°±3.4° (5°–18° in group 1 versus 15.1°±5.6° (6°–25° in group 2 (P=0.027. The HS was 16.8°±3.8 versus 19.2°±4.6, respectively, P=0.07. The POTSI value did not differ between groups. Conclusion. Girls with Cobb angle above 45 degrees, who have been subjected to brace treatment, revealed smaller clinical deformity of their back comparing to nontreated girls having similar radiological curvatures.

Clinical Outcomes of a Pneumatic Unloader Brace for Kellgren-Lawrence Grades 3 to 4 Osteoarthritis: A Minimum 1-Year Follow-Up Study.

Science.gov (United States)

Chughtai, Morad; Bhave, Anil; Khan, Sabahat Z; Khlopas, Anton; Ali, Osman; Harwin, Steven F; Mont, Michael A

2016-11-01

The use of a pneumatic unloader brace has been shown in pilot studies to decrease pain and increase muscle strength in patients with knee osteoarthritis (OA). Therefore, we analyzed patients who had knee OA, and either received a pneumatic unloader brace and conventional treatment or conventional treatment alone. Specifically, we assessed: (1) use of pain relieving injections; (2) opioid consumption; and (3) the eventual need for total knee arthroplasty (TKA) in the above-mentioned cohort. We performed an analysis of a longitudinally maintained database of patients from a prospective, randomized, single center study. This study randomized patients who had Kellgren-Lawrence grades 3 to 4 to receive either a pneumatic unloader brace and conventional treatment or conventional treatment alone. The brace cohort comprised 11 patients with a mean age of 55 years (range, 37-70 years). The final matched cohort comprised 25 patients with a mean age of 63 years (range, 41-86 years). The minimum follow-up was 1 year. There was a lower proportion of patients who underwent an eventual TKA in the bracing cohort as compared with the nonbracing cohort (18 vs. 36%). The mean time to TKA was longer in the bracing cohort as compared with the nonbracing cohort (482 vs. 389 days). The proportion of patients who used opioids was similar in both groups (27 vs. 22%). There was a significantly lower number of patients who received injections in the bracing cohort as compared with the nonbracing cohort (46 vs. 83%, p  = 0.026). The bracing cohort had received a significantly lower number of injections and a lower rate of subsequent TKA as compared with the nonbracing cohort. The mean time to TKA was also longer among the bracing cohort. These results may demonstrate the potential of this brace to reduce the need for and prolonging the time to TKA. Performing larger prospective randomized studies, with built-in compliance monitors is warranted. This brace may be a valuable adjunct to the

A calorimetric and equilibrium investigation of the reaction {l_brace}methyl ferulate(aq) + H{sub 2}O(l) = methanol(aq) + ferulic acid(aq){r_brace}

Energy Technology Data Exchange (ETDEWEB)

Goldberg, Robert N., E-mail: robert.goldberg@nist.go [Biochemical Science Division, National Institute of Standards and Technology, Gaithersburg, MD 20876 (United States); Department of Chemistry and Biochemistry, University of Maryland, Baltimore County, Baltimore, MD 21250 (United States); Lang, Brian E., E-mail: brian.lang@nist.go [Biochemical Science Division, National Institute of Standards and Technology, Gaithersburg, MD 20876 (United States); Selig, Michael J., E-mail: michael.selig@nrel.go [National Renewable Energy Laboratory, Biosciences Center, 1617 Cole Boulevard, Golden, CO 80401 (United States); Decker, Stephen R., E-mail: steve.decker@nrel.go [National Renewable Energy Laboratory, Biosciences Center, 1617 Cole Boulevard, Golden, CO 80401 (United States)

2011-03-15

Microcalorimetry and high-performance liquid chromatography (HPLC) have been used to conduct a thermodynamic investigation of the reaction: {l_brace}methyl ferulate(aq) + H{sub 2}O(l) = methanol(aq) + ferulic acid(aq){r_brace}, as catalyzed by feruloyl esterase. Values of the apparent equilibrium constant K' = (29.6 {+-} 0.7) (T = 298.15 K, citrate buffer at pH 4.98, ionic strength I = 0.39 mol {center_dot} kg{sup -1}) and of the calorimetrically determined enthalpy of reaction {Delta}{sub r}H(cal) = (4.0 {+-} 0.9) kJ {center_dot} mol{sup -1} (T = 298.15 K and citrate buffer at pH 4.81, I = 0.36 mol {center_dot} kg{sup -1}) were measured. A chemical equilibrium model, together with pKs and standard enthalpies of reaction {Delta}{sub r}H{sup 0} for the H{sup +}(aq) binding reactions of the reactants and products, was then used to calculate the values K = (1.89 {+-} 0.06) . 10{sup -4}, {Delta}{sub r}H{sup o} = (7.3 {+-} 1.7) kJ {center_dot} mol{sup -1}, {Delta}{sub r}G{sup o} = (21.25 {+-} 0.07) kJ {center_dot} mol{sup -1}, and {Delta}{sub r}S{sup o} = - (46.8 {+-} 5.7) J {center_dot} K{sup -1} {center_dot} mol{sup -1} for the chemical reference reaction {l_brace}methyl ferulate(aq) + H{sub 2}O(l) = methanol(aq) + ferulic acid{sup -}(aq) + H{sup +}(aq){r_brace}. These values of K and {Delta}{sub r}H{sup o} are similar in magnitude to the corresponding values reported for the reaction {l_brace}propyl gallate(aq) + H{sub 2}O(l) = 3,4,5-trihydroxybenzoic acid{sup -}(aq) + 1-propanol(aq) + H{sup +}(aq){r_brace}. The results obtained in this study can be used in a chemical equilibrium model to calculate how K' and other standard transformed properties such as the standard transformed enthalpy {Delta}{sub r}H'{sup o}, standard transformed Gibbs free energy {Delta}{sub r}G'{sup o}, and the change in binding of H{sup +}(aq), {Delta}{sub r}N(H{sup +}), vary with the independent variables T, pH, and I.

Spanish validation of Bad Sobernheim Stress Questionnaire (BSSQ (brace).es) for adolescents with braces.

Science.gov (United States)

D'Agata, Elisabetta; Testor, Carles Pérez; Rigo, Manuel

2010-07-15

As a result of scientific and medical professionals gaining interest in Stress and Health Related Quality of Life (HRQL), the aim of our research is, thus, to validate into Spanish the German questionnaire Bad Sobernheim Stress Questionnaire (BSSQ) (mit Korsett), for adolescents wearing braces. The methodology used adheres to literature on trans-cultural adaptation by doing a translation and a back translation; it involved 35 adolescents, ages ranging between 10 and 16, with Adolescent Idiopathic Scoliosis (AIS) and wearing the same kind of brace (Rigo System Chêneau Brace). The materials used were a socio-demographics data questionnaire, the SRS-22 and the Spanish version of BSSQ(brace).es. The statistical analysis calculated the reliability (test-retest reliability and internal consistency) and the validity (convergent and construct validity) of the BSSQ (brace).es. BSSQ(brace).es is reliable because of its satisfactory internal consistency (Cronbach's alpha coefficient was 0.809, p < 0.001) and temporal stability (test-retest method with a Pearson correlation coefficient of 0.902 (p < 0.01)).It demonstrated convergent validity with SRS-22 since the Pearson correlation coefficient was 0.656 (p < 0.01). By undertaking an Exploratory Principal Components Analysis, a latent structure was found based on two Components which explicate the variance at 60.8%. BSSQ (brace).es is reliable and valid and can be used with Spanish adolescents to assess the stress level caused by the brace.

Isothermal (vapour + liquid) equilibrium for the binary {l_brace}1,1,2,2-tetrafluoroethane (R134) + propane (R290){r_brace} and {l_brace}1,1,2,2-tetrafluoroethane (R134) + isobutane (R600a){r_brace} systems

Energy Technology Data Exchange (ETDEWEB)

Dong Xueqiang [Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, P.O. Box 2711, Beijing 100190 (China); Graduate University of Chinese Academy of Sciences, Beijing 100039 (China); Gong Maoqiong, E-mail: gongmq@mail.ipc.ac.c [Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, P.O. Box 2711, Beijing 100190 (China); Liu Junsheng [Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, P.O. Box 2711, Beijing 100190 (China); Graduate University of Chinese Academy of Sciences, Beijing 100039 (China); Wu Jianfeng, E-mail: jfwu@mail.ipc.ac.c [Key Laboratory of Cryogenics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, P.O. Box 2711, Beijing 100190 (China)

2010-09-15

(Vapour + liquid) equilibrium (VLE) data for the binary systems of {l_brace}1,1,2,2-tetrafluoroethane (R134) + propane (R290){r_brace} and {l_brace}1,1,2,2-tetrafluoroethane (R134) + isobutane (R600a){r_brace} were measured with a recirculation method at the temperatures ranging from (263.15 to 278.15) K and (268.15 to 288.15) K, respectively. All of the data were correlated by the Peng-Robinson (PR) equation of state (EoS) with the Huron-Vidal (HV) mixing rules utilizing the non-random two-liquid (NRTL) activity coefficient model. Good agreement can be found between the experimental data and the correlated results. Azeotropic behaviour can be found at the measured temperature ranges for these two mixtures.

Discrepancy in clinical versus radiological parameters describing deformity due to brace treatment for moderate idiopathic scoliosis

Directory of Open Access Journals (Sweden)

Szulc Andrzej

2007-12-01

rotation in the main curvature was 8.4° ± 2.7°in braced and 11.4° ± 2.7° in un-braced patients (difference extremely significant, p = 0.0003. The value of the sum of angles of trunk rotation at three levels of the trunk was 12.8° ± 4.6° in braced and 16.5° ± 3.8° in un-braced patients (difference very significant, p = 0.0038. The POTSI did not differ significantly between the groups (p = 0.78, the Hump Sum values were not quite different (p = 0.07. Conclusion (1 Adolescent girls wearing the brace for idiopathic scoliosis of 25 to 40 degrees of Cobb angle, reveal smaller clinical rotational deformity of their back than non-treated girls having similar radiological deformity. (2 Evaluation of the results of treatment for idiopathic scoliosis should consider parameters describing both clinical and radiological deformity.

The effect of ankle brace type on braking response time-A randomised study.

Science.gov (United States)

Dammerer, Dietmar; Waidmann, Cornelia; Haid, Christian; Thaler, Martin; Krismer, Martin; Liebensteiner, Michael C

2015-11-01

The question whether or not a patient with an ankle brace should drive a car is of obvious importance because brake response time (BRT) is considered one of the most important factors for driving safety. Applying a crossover study design, 70 healthy participants (35 women, 35 men) participated in our study. BRT was assessed using a custom-made driving simulator. We assessed BRT under six conditions: without a brace (control) (1), with a typical postoperative ankle brace with adjustable ROM and the settings: unrestricted (2), fixed at 15° (3) plantar flexion, restricted with 15°/50° (4) (dorsal/plantar flexion), a brace for ligament instabilities (5) and an elastic ankle bandage (6). Participants were instructed to apply the brake pedal exclusively with the right foot as quickly as possible on receipt of a visual stimulus. The 70 participants showed significantly impaired BRT with the ankle brace for ROM restriction in the settings: unrestricted (p<0.001), fixed at 15° plantar flexion (p<0.001) and 15°/50° dorsal/plantar flexion (p<0.001) as compared to the control group. BRT was not impaired with the brace for ankle instabilities or the elastic ankle bandage. In conclusion, right-sided ROM restricting ankle braces involve significant impairment of BRT in healthy participants. No such prolonged BRT was found for an elastic ankle bandage or the ligament brace. Copyright © 2015 Elsevier Ltd. All rights reserved.

Long-term results after Boston brace treatment in adolescent idiopathic scoliosis

Directory of Open Access Journals (Sweden)

Steen Harald

2009-08-01

Full Text Available Abstract Background Few studies have evaluated long-term outcome after bracing using validated health related quality of life outcome measures. The aim of the present study was to evaluate the long-term outcome in adolescent idiopathic scoliosis (AIS 12 years or more after treatment with the Boston brace. Methods 109 (80% of 135 patients (7 men with AIS treated with the Boston brace at a mean of 19.2 (range 12–28 years previously responded to long-term follow-up examination. All patients (n = 109 answered a standardised questionnaire including demographics, work status, treatment, Global Back Disability Question, Oswestry Disability Index (ODI (100-worst possible, General Function Score (GFS (100 – worst possible, EuroQol (EQ-5D (1 – best possible, EQ-VAS (100 – best possible and Scoliosis Research Society -22 (SRS – 22 (5 – best possible. Clinical and radiological examination was obtained in 86 patients. Results The magnitude of the primary prebrace major curve was in average 33.4° (range 20 – 52. At weaning and at the last follow-up the corresponding values were 28.3° (9–56 and 34.2° (8 – 87, respectively. The mean age at follow-up was 35 (27 – 46 years. Work status was: full time (80%, on sick-leave (3%, on rehabilitation (4%, disability pension (4%, homemaker (7%, students (2%, 7% had changed their job because of back pain. 88% had had delivered a baby, 55% of them had pain in pregnancy. Global back status was excellent or good in 81%. The mean (standard deviation ODI was 6.4 (9.8, GFS 5.4 (10.5, EQ-5D 0.84 (0.2, SRS-22: pain 4.2 (0.8, mental health 4.2 (0.7, self-image 3.9 (0.7, function 4.1 (0.6, satisfaction with treatment 3.7 (1.0. 28% had taken physiotherapy for back pain the last year and 12% had visited a doctor. Conclusion Long-term results were satisfactory in most patients with AIS treated with the Boston brace.

A new method of MR total spine imaging for showing the brace effect in scoliosis

Energy Technology Data Exchange (ETDEWEB)

Schmitz, A.; Kandyba, J.; Koenig, R.; Jaeger, U.E.; Gieseke, J.; Schmitt, O. [Univ. of Bonn (Germany)

2001-07-01

Bracing is a method of early, nonsurgical treatment for scoliosis, but a hypokyphotic effect on the thoracic spine is reported. We developed a magnetic resonance tomography (MR) procedure presenting an image of the whole spine in the coronal and sagittal planes (MR total spine imaging), and studied the brace effect, using this technique. We examined 26 female patients with idiopathic scoliosis treated with a Cheneau brace (mean age, 13.2 years; mean duration of brace treatment at the time of investigation, 1.5 years). The MR examinations were performed with the patient in the supine position with and without the brace in direct sequence. As measured on the coronal MR images, the thoracic curve was corrected, on average, from 29 deg to 22 deg (mean correction, 24%). There was a slight reduction in the sagittal Cobb angle measured between T4 and T12 (mean sagittal Cobb angle without brace, 14 deg ; with brace, 12 deg), which was still a significant change. MR total spine imaging could be a useful tool for studying the brace effect in scoliosis in two planes. Using this technique, we found reduced sagittal Cobb angles for the thoracic kyphosis with brace. Because there is no radiation exposure, the MR procedure has a potential use in the monitoring of brace treatment. (author)

Cervical bracing practices after degenerative cervical surgery: a survey of cervical spine research society members.

Science.gov (United States)

Lunardini, David J; Krag, Martin H; Mauser, Nathan S; Lee, Joon Y; Donaldson, William H; Kang, James D

2018-05-21

Context: Prior studies have shown common use of post-operative bracing, despite advances in modern day instrumentation rigidity and little evidence of brace effectiveness. To document current practice patterns of brace use after degenerative cervical spine surgeries among members of the Cervical Spine Research Society (CSRS), to evaluate trends, and to identify areas of further study. A questionnaire survey METHODS: A 10 question survey was sent to members of the Cervical Spine Research Society to document current routine bracing practices after various common degenerative cervical spine surgical scenarios, including fusion and non-fusion procedures. The overall bracing rate was 67%. This included 8.4% who used a hard collar in each scenario. Twenty-two percent of surgeons never used a hard collar, while 34% never used a soft collar, and 3.6% (3 respondents) did not use a brace in any surgical scenario. Bracing frequency for specific surgical scenarios varied from 39% after foraminotomy to 88% after multi-level corpectomy with anterior & posterior fixation. After one, two and three level anterior cervical discectomy & fusion (ACDF), bracing rates were 58%, 65% and 76% for an average of 3.3, 4.3 and 5.3 weeks, respectively. After single level corpectomy, 77% braced for an average of 6.2 weeks. After laminectomy and fusion, 72% braced for an average of 5.4 weeks. Significant variation persists among surgeons on the type and length of post-operative brace usage after cervical spine surgeries. Overall rates of bracing have not changed significantly with time. Given the lack evidence in the literature to support bracing, reconsidering use of a brace after certain surgeries may be warranted. Copyright © 2018. Published by Elsevier Inc.

Effectiveness of Chêneau brace treatment for idiopathic scoliosis: prospective study in 79 patients followed to skeletal maturity

Directory of Open Access Journals (Sweden)

Kotwicki Tomasz

2011-01-01

Full Text Available Abstract Background Progressive idiopathic scoliosis can negatively influence the development and functioning of 2-3% of adolescents, with health consequences and economic costs, placing the disease in the centre of interest of the developmental medicine. The aim of this study was to evaluate the effectiveness of Chêneau brace in the management of idiopathic scoliosis. Methods A prospective observational study according to SOSORT and SRS recommendations comprised 79 patients (58 girls and 21 boys with progressive idiopathic scoliosis, treated with Chêneau brace and physiotherapy, with initial Cobb angle between 20 and 45 degrees, no previous brace treatment, Risser 4 or more at the final evaluation and minimum one year follow-up after weaning the brace. Achieving 50° of Cobb angle was considered surgical recommendation. Results At follow-up 20 patients (25.3% improved, 18 patients (22.8% were stable, 31 patients (39.2% progressed below 50 degrees and 10 patients (12.7% progressed beyond 50 degrees (2 of these 10 patients progressed beyond 60 degrees. Progression concerned the younger and less skeletally mature patients. Conclusion Conservative treatment with Chêneau orthosis and physiotherapy was effective in halting scoliosis progression in 48.1% of patients. The results of this study suggest that bracing is effective in reducing the incidence of surgery in comparison with natural history.

Radiographic evaluation of acute distal radius fracture stability: A comparative cadaveric study between a thermo-formable bracing system and traditional fiberglass casting.

Science.gov (United States)

Santoni, Brandon G; Aira, Jazmine R; Diaz, Miguel A; Kyle Stoops, T; Simon, Peter

2017-08-01

Distal radius fractures are common musculoskeletal injuries and many can be treated non-operatively with cast immobilization. A thermo-formable brace has been developed for management of such fractures, but no data exist regarding its comparative stabilizing efficacy to fiberglass casting. A worst-case distal radius fracture was created in 6 cadaveric forearms. A radiolucent loading fixture was created to apply cantilever bending/compression loads ranging from 4.5N to 66.7N across the simulated fracture in the: (1) non-stabilized, (2) braced; and (3) casted forearms, each forearm serving as its own control. Fracture fragment translations and rotations were measured radiographically using orthogonal radiographs and a 2D-3D, CT-based transformation methodology. Under 4.5N of load in the non-stabilized condition, average sagittal plane rotation and 3D center of mass translation of the fracture fragment were 12.3° and 5.3mm, respectively. At the 4.5N load step, fragment rotation with the brace (avg. 0.0°) and cast (0.1°) reduced sagittal plane rotation compared to the non-stabilized forearm (Pthermo-formable brace stabilized the fracture in a manner that was not radiographically or biomechanically different from traditional fiberglass casting. Study results support the use of the thermo-formable brace clinically. Copyright © 2017 Elsevier Ltd. All rights reserved.

SOSORT Award Winner 2015: a multicentre study comparing the SPoRT and ART braces effectiveness according to the SOSORT-SRS recommendations.

Science.gov (United States)

Zaina, Fabio; de Mauroy, Jean Claude; Donzelli, Sabrina; Negrini, Stefano

2015-01-01

Data comparing different braces for adolescent idiopathic scoliosis (AIS) are scant. The SRS criteria represent some guidelines for comparing results from different studies, but controlled studies are much more reliable. Recently, super-rigid braces have been introduced in clinical practice with the aim of replacing Risser and EDF casts. The aim of the present study is to compare the short-term radiographic results of two super-rigid braces, the ART and the SPORT (Sforzesco) brace. A group of consecutive patients with Cobb >40°, Risser 0-4, age >10 treated with the ART brace for 6 months were matched with a group of similar patients taken from a prospective database of patients treated with the Sforzesco brace. Patients were matched according to Cobb severity, pattern and localization of the curve. All patients had a full-time brace prescription (23-24 hours per day) and an indication to perform scoliosis-specific exercises and were assessed radiographically both immediately in the brace and after 6 months of treatment out of brace. Curves were analyzed according to the pattern and localization taking into consideration both the in-brace correction and the 6-month out-of-brace results. t-test, ANOVA, linear regression, alpha set at 0.05. Twenty-six patients were included in the ART brace group, and 26 in the Sforzesco brace group. At baseline, no differences were noted for gender (3 males for each group), age (14.1 ± 0.3 for ART vs 13.9 ± 0.3 for Sforzesco), ATR (11.8 ± 3.2 vs 11.5 ± 4.2 for thoracic curves and 7.8 ± 4.0 vs 7.1 ± 6.1 for lumbar/thoracolumbar), Cobb angle (44.8 ± 2 vs 45.5 ± 2 for thoracic; 43.8 ± 2 vs 46.0 ± 2 for lumbar/thoracolumbar) or Risser sign (median 2 for both groups). The in-brace correction was slightly better for the ART brace, but didn't reach statistical significance (24.3 ± 8.5 vs 28.0 ± 6.8 for thoracic; 23.7 ± 10.4 vs 29.9 ± 4.2 for lumbar/thoracolumbar). At 6�

A prospective randomized controlled study on the treatment outcome of SpineCor brace versus rigid brace for adolescent idiopathic scoliosis with follow-up according to the SRS standardized criteria.

Science.gov (United States)

Guo, Jing; Lam, Tsz Ping; Wong, Man Sang; Ng, Bobby Kin Wah; Lee, Kwong Man; Liu, King Lok; Hung, Lik Hang; Lau, Ajax Hong Yin; Sin, Sai Wing; Kwok, Wing Kwan; Yu, Fiona Wai Ping; Qiu, Yong; Cheng, Jack Chun Yiu

2014-12-01

SpineCor is a relatively innovative brace for non-operative treatment of adolescent idiopathic scoliosis (AIS). However, the effectiveness of SpineCor still remains controversial. The objective of the current study was to compare the treatment outcomes of SpineCor brace with that of rigid brace following the standardized Scoliosis Research Society (SRS) criteria on AIS brace study. Females subjects with AIS and aged 10-14 were randomly allocated into two groups undergoing treatment of SpineCor (S Group, n = 20) or rigid brace (R Group, n = 18). During SpineCor treatment, patients who had curve progression of >5° would be required to switch to rigid brace treatment. The effectiveness of the two brace treatments was assessed using the SRS standardized criteria. Before skeletal maturity, 7 (35.0%) patients in the S Group and 1 (5.6%) patient in the R Group had curve progression >5° (P = 0.026). At skeletal maturity, 5 of the 7 (71.4%) patients who failed with SpineCor bracing showed control from further progression by changing to rigid bracing. At the latest follow-up with a mean duration of 45.1 months after skeletally maturity, 29.4% of patients who were successfully treated by rigid brace showed further curve progression beyond skeletal maturity, versus 38.5% of patients in the SpineCor group (P > 0.05). For both groups, the primary curves were slightly improved at the time of brace weaning, but additionally increased at the latest follow-up, with a rate of 1.5° per year for post-maturity progression. Curve progression rate was found to be significantly higher in the SpineCor group when compared with the rigid brace group. Changing to rigid bracing could control further curve progression for majority of patients who previously failed with SpineCor bracing. For both SpineCor and rigid brace treatments, 30-40% of patients who were originally successfully treated by bracing would exhibit further curve progression beyond skeletal maturity. The post

Brace treatment for patients with Scheuermann's disease - a review of the literature and first experiences with a new brace design

Directory of Open Access Journals (Sweden)

Turnbull Deborah

2009-09-01

Full Text Available Abstract Background In contemporary literature few have written in detail on the in-brace correction effects of braces used for the treatment of hyperkyphosis. Bradford et al. found their attempts effective, treating Scheuermann's kyphosis with Milwaukee braces, but their report did not specifically focus on in-brace corrections. White and Panjabi's research attempted to correct a curvature of > 50° with the help of distraction forces, but consequently led to a reduction in patient comfort in the application of the Milwaukee brace. In Germany they avoid this by utitlising braces to treat hyperkyphosis that use transverse correction forces instead of distraction forces. Further efforts to reduce brace material have resulted in a special bracing design called kyphologic™ brace. The aim of this review is to present appropriate research to collect and evaluate possible in-brace corrections which have been achieved with brace treatment for hyperkyphosis. This paper introduces new methods of bracing and compares the results of these with other successful bracing concepts. Materials and methods 56 adolescents with the diagnosis of thoracic Scheuermann's hyperkyphosis or a thoracic idiopathic hyperkyphosis (22 girls and 34 boys with an average age of 14 years (12-17 yrs. were treated with the kyphologic™ brace between May 2007 and December 2008. The average Stagnara angle was 55,6° (43-80. In-brace correction was recorded and compared to the initial angle using the t-test. Results The average Stagnara angle in the brace was 39°. The average in-brace correction was 16.5° (1-40°. The verage percentage of in-brace correction compared to the initial value was 36%. The differences were significant in the t-test (t = 5.31, p Discussion If we assume that outcome of brace treatment positively correlates with in-brace correction, the treatment should be initiated before the curvature angle exceeds 50 - 55° in a growing adolescent. In scoliosis bracing

Two different one-dimensional structural motifs in [catena-{Cu(tacn)}2Pd(CN)4]Br2.[catena-Cu(tacn)Pd(CN)4]2.H2O (tacn is 1,4,7-triazacyclononane).

Science.gov (United States)

Kuchár, Juraj; Cernák, Juraj

2009-07-01

The title compound, catena-poly[[bis[(triazacyclononane-kappa(3)N,N',N'')copper(II)]-di-mu-cyanido-kappa(4)N:C-palladate(II)-di-mu-cyanido-kappa(4)C:N] dibromide bis[[(triazacyclononane-kappa(3)N,N',N'')copper(II)]-mu-cyanido-kappa(2)N:C-[dicyanidopalladate(II)]-mu-cyanido-kappa(2)C:N] monohydrate], {[Cu(2)Pd(CN)(4)(C(6)H(15)N(3))(2)]Br(2).[Cu(2)Pd(2)(CN)(8)(C(6)H(15)N(3))(2)].H(2)O}(n), (I), was isolated from an aqueous solution containing tacn.3HBr (tacn is 1,4,7-triazacyclononane), Cu(2+) and tetracyanidopalladate(2-) anions. The crystal structure of (I) is essentially ionic and built up of 2,2-electroneutral chains, viz. [Cu(tacn)(NC)-Pd(CN)(2)-(CN)-], positively charged 2,4-ribbons exhibiting the composition {[Cu(tacn)(NC)(2)-Pd(CN)(2)-Cu(tacn)](2n+)}(n), bromide anions and one disordered water molecule of crystallization. The O atom of the water molecule occupies two unique crystallographic positions, one on a centre of symmetry, which is half occupied, and the other in a general position with one-quarter occupancy. One of the tacn ligands also exhibits disorder. The formation of two different types of one-dimensional structural motif within the same structure is a unique feature of this compound.

Efficacy, safety, and economics of bracing after spine surgery: a systematic review of the literature.

Science.gov (United States)

Zhu, Mary P; Tetreault, Lindsay A; Sorefan-Mangou, Fatimah; Garwood, Philip; Wilson, Jefferson R

2018-01-31

Bracing is often used after spinal surgery to immobilize the spine, improve fusion, and relieve pain. However, controversy exists regarding the efficacy, necessity, and safety of various bracing techniques in the postsurgical setting. In this systematic review, we aimed to compare the effectiveness, safety, and cost-effectiveness of postoperative bracing versus no postoperative bracing after spinal surgery in patients with several common operative spinal pathologies. A systematic review was carried out to compare postoperative bracing and no postoperative bracing. A systematic search was conducted of MEDLINE, Embase, and the Cochrane Collaboration Library from 1970 to May 2017, supplemented by manual searching of the reference list of relevant studies and previously published reviews. Studies were included if they compared disability, quality of life, functional impairment, radiographic outcomes, cost-effectiveness, or complications between patients treated with postoperative bracing and patients not receiving any postoperative bracing. Each article was critically appraised independently by two reviewers, and the overall body of evidence was rated using guidelines outlined by the Grading of Recommendation Assessment, Development and Evaluation (GRADE) Working Group. Of the 858 retrieved citations, 5 studies met the inclusion criteria and were included in this review, consisting of 4 randomized controlled trials and 1 prospective cohort study. Low to moderate evidence suggests that there are no significant differences in most measures of disability, pain, quality of life, functional impairment, radiographic outcomes, and safety between groups. Isolated studies reported statistically significant and inconsistent differences between groups with respect to Neck Disability Index at 6 weeks postoperatively or Short Form-36 Physical Component Score at 1.5, 3, 6, and 12 months postoperatively. Based on limited evidence, postoperative bracing does not result in improved

Peculiarity of component interaction in {l_brace}Y, Dy{r_brace}-Mn-Sn ternary systems

Energy Technology Data Exchange (ETDEWEB)

Romaka, V.V. [Department of Materials Engineering and Applied Physics, Lviv Polytechnic National University, Ustyyanovycha Str. 5, 79013 Lviv (Ukraine); Konyk, M. [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya Str. 6, 79005 Lviv (Ukraine); Romaka, L., E-mail: romakal@franko.lviv.ua [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya Str. 6, 79005 Lviv (Ukraine); Pavlyuk, V. [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya Str. 6, 79005 Lviv (Ukraine); Jan Dlugosz University, Institute of Chemistry, Environmental Protection and Biotechnology, al. Armii Krajowej 13/15, 42200 Czestochowa (Poland); Ehrenberg, H. [Institute for Complex Materials, IFW Dresden, Helmholtzstrasse 20, D-01069 Dresden (Germany); Tkachuk, A. [Inorganic Chemistry Department, Ivan Franko Lviv National University, Kyryla and Mefodiya Str. 6, 79005 Lviv (Ukraine)

2011-07-14

Highlights: > {l_brace}Y, Dy{r_brace}-Mn-Sn ternary systems at 770 K are characterized by formation of stannides with general compositions RMn{sub 6}Sn{sub 6} and R{sub 4}Mn{sub 4}Sn{sub 7}. > The crystal structure of YMn{sub 6}Sn{sub 6} was determined by single crystal and powder diffraction methods. > Structural analysis showed that Dy{sub 4}Mn{sub 4}Sn{sub 7} compound is disordered. > Isostructural R{sub 4}Mn{sub 4}Sn{sub 7} compounds were also found with Gd, Tb, Ho, Er, Tm(confirmed), Yb, and Lu. - Abstract: The phase equilibria in the Y-Mn-Sn and Dy-Mn-Sn ternary systems were studied at 770 K by means of X-ray and metallographic analyses in the whole concentration range. Both Y-Mn-Sn and Dy-Mn-Sn systems are characterized by formation of two ternary compounds RMn{sub 6}Sn{sub 6} (MgFe{sub 6}Ge{sub 6}-type, space group P6/mmm) and R{sub 4}Mn{sub 4}Sn{sub 7} (Zr{sub 4}Co{sub 4}Ge{sub 7}-type, space group I4/mmm). The disorder in Dy{sub 4}Mn{sub 4}Sn{sub 7} compound was found by single crystal method. Compounds with the same type of structure were also found with Gd, Tb, Ho, Er, Tm (confirmed), Yb, and Lu and their lattice parameters were determined.

Synthesis and characterization of copolymers 4,5-dihydroisoxazole and (-)-menthyl acrylates; Sintese e caracterizacao de copolimeros de cadeia lateral derivados de acrilatos de 4,5-di-hidroisoxazol e do (-)-mentol

Energy Technology Data Exchange (ETDEWEB)

Passo, Joel A.; Merlo, Aloir A. [Universidade Federal do Rio Grande do Sul, Porto Alegre, RS (Brazil). Inst. de Quimica; Eccher, Juliana; Bechtold, Ivan H. [Universidade Federal de Santa Catarina, Florianopolis, SC (Brazil). Campus Universitario Trindade. Dept. de Fisica; Kelly, Stephen M., E-mail: aloir@iq.ufrgs.br [University of Hull, Hull (United Kingdom). Dept. of Chemistry

2012-07-01

Five monomers 5-[4-(5-cyano-4,5-dihydroisoxazol-3-yl)phenoxy]undecyl acrylate (7a); n-alkyl 3-{l_brace}4-[5-(acryloyloxyundecyl)oxyphenyl]{r_brace}-4,5-dihydroisoxazole-5-carboxylate (7b,c for n-butyl and n-hexyl, respectively); 3-{l_brace}4-[5-(acryloyloxyundecyl) oxyphenyl]{r_brace}-4,5-dihydroisoxazole-5-carboxylic acid (7d) and (1R,2S,5R)-2-isopropyl-5-methylcyclohexyl acrylate (9) and the corresponding copolymers 10a-d,11 and homopolymers 12 from 7a and 13 from 9 were designed and synthesized. Except for acrylate 9 which is derived from (-)-menthol, all of the monomers belong to the series containing the isoxazoline ring linked to the acrylate unit by a flexible spacer chain of eleven methylene units. They presented low glass temperature and despite birefringence behavior, these copolymers showed no mesomorphic properties. (author)

Overweight is not predictive of bracing failure in adolescent idiopathic scoliosis: results from a retrospective cohort study.

Science.gov (United States)

Zaina, Fabio; Donzelli, Sabrina; Negrini, Stefano

2017-06-01

Overweight was found to be a negative predictor of brace effectiveness for adolescent idiopathic scoliosis (AIS), with a threefold higher risk of progression than in normal weight patients. The aim of this study is to investigate overweight, as a predictor of brace results in AIS patients. Design: retrospective cohort study. 351 AIS patients (306 females), mean age 12.9 ± 1.4, mean Cobb 35.6 ± 11.4°, mean ATR 11 ± 4.3°, BMI 19.7 ± 3, median Risser: 2. no previous treatment, full-time prescription of brace at first visit (18-23 h per day), scoliosis physiotherapeutic exercise according to the SEAS protocol associated. improved, progressed, and stable according to the 5° Cobb agreed threshold. a stepwise linear regression was used to look for the effect of BMI as a predictor of result. A Chi-square test and logistic regression were used for the overweight category (BMI ≥ 85th percentile). Control for possible confounders was applied. BMI is poorly correlated with final results. Confounders' adjustment did not change the correlation, and the predictive model explained about 10% of the result. Brace results were not statistically different in overweight and normal weight: 44 vs 52% improved, 52 vs 41% stable, and 3 vs 7% worsened, respectively. Brace results were similar in overweight and normal weight subjects. These findings subvert the previous results and disprove the role of overweight as a negative predictor. Treatment management, brace type and effectiveness may play a major role in reducing the risks of scoliosis progression.

Speeds of sound in {l_brace}(1 - x)CH{sub 4} + xN{sub 2}{r_brace} with x = (0.10001, 0.19999, and 0.5422) at temperatures between 170 K and 400 K and pressures up to 30 MPa

Energy Technology Data Exchange (ETDEWEB)

Estela-Uribe, J.F. [Facultad de Ingenieria, Universidad Javeriana-Cali, Calle 18, 118-250 Cali (Colombia); Trusler, J.P.M. [Department of Chemical Engineering, Imperial College London, London SW7 2AZ (United Kingdom)]. E-mail: m.trusler@imperial.ac.uk; Chamorro, C.R. [Grupo de Termodinamica y Calibracion (TERMOCAL), Dpto. Ingenieria Energetica y Fluidomecanica, E.T.S. de Ingenieros Industriales, Universidad de Valladolid, E-47071 Valladolid (Spain); Segovia, J.J. [Grupo de Termodinamica y Calibracion (TERMOCAL), Dpto. Ingenieria Energetica y Fluidomecanica, E.T.S. de Ingenieros Industriales, Universidad de Valladolid, E-47071 Valladolid (Spain); Martin, M.C. [Grupo de Termodinamica y Calibracion (TERMOCAL), Dpto. Ingenieria Energetica y Fluidomecanica, E.T.S. de Ingenieros Industriales, Universidad de Valladolid, E-47071 Valladolid (Spain); Villamanan, M.A. [Grupo de Termodinamica y Calibracion (TERMOCAL), Dpto. Ingenieria Energetica y Fluidomecanica, E.T.S. de Ingenieros Industriales, Universidad de Valladolid, E-47071 Valladolid (Spain)

2006-07-15

The speed of sound in {l_brace}(1 - x)CH{sub 4} + xN{sub 2}{r_brace} has been measured with a spherical acoustic resonator. Two mixtures with x = (0.10001 and 0.19999) were studied along isotherms at temperatures between 220 K and 400 K with pressures up to 20 MPa; a few additional measurements at p = (25 and 30) MPa are also reported. A third mixture with x = 0.5422 was studied along pseudo-isochores at amount-of-substance densities between 0.2 mol . dm{sup -3} and 5 mol . dm{sup -3}. Corrections for molecular vibrational relaxation are discussed in detail and relaxation times are reported. The overall uncertainty of the measured speeds of sound is estimated to be not worse than {+-}0.02%, except for those measurements in the mixture with x = 0.5422 that lie along the pseduo-isochore at the highest amount-of-substance density. The results have been compared with the predictions of several equations of state used for natural gas systems.

Behaviour of Strengthened RC Frames with Eccentric Steel Braced Frames

Science.gov (United States)

Kamanli, Mehmet; Unal, Alptug

2017-10-01

After devastating earthquakes in recent years, strengthening of reinforced concrete buildings became an important research topic. Reinforced concrete buildings can be strengthened by steel braced frames. These steel braced frames may be made of concentrically or eccentrically indicated in Turkish Earthquake Code 2007. In this study pushover analysis of the 1/3 scaled 1 reinforced concrete frame and 1/3 scaled 4 strengthened reinforced concrete frames with internal eccentric steel braced frames were conducted by SAP2000 program. According to the results of the analyses conducted, load-displacement curves of the specimens were compared and evaluated. Adding eccentric steel braces to the bare frame decreased the story drift, and significantly increased strength, stiffness and energy dissipation capacity. In this strengthening method lateral load carrying capacity, stiffness and dissipated energy of the structure can be increased.

Simulation of Scoliosis Treatment Using a Brace

Directory of Open Access Journals (Sweden)

J. Čulík

2004-01-01

Full Text Available Ivo Maoík M.D. has treated many child patients with scoliosis at the "Centre for Locomotor Defects", Olšanská 7, 130 00 Prague 3. The author has cooperated with him, and composed the computer program for the spine stress state under brace effects and for simulating scoliosis treatment. The program simulates the spinal curve remodelling in time for a specific child patients, and the algorithm for stress state calculation and treatment simulation is given.Orthopaedists in the Czech Republic use Cheneau-type or Cerny-type corrective braces. The brace exerts force effects on the skeleton of a child. The brace is made individually for each patient, in the following way: first, a negative plaster form of the child`s trunk is made, and then the positive plaster form is created. The orthopaedist determines the places where brace has to load the patient`s trunk, and the plaster form deepened in these places on the basis of his advice. The laminate brace made according to this plaster form constricts the child`s trunk (like a tight shoe.This paper shows how the stress state is determined in vertebrae and in inter-vertebral discs, and the solution of spinal curvature correction under brace force effects for a specific child patient. The project aims to find the dependence of the activation and velocity of spinal curvature correction in the spinal stress state for many patients. The paper shows the computing algorithms for spinal deformations and the stress state under brace force effects, and a simulation of spinal curvature correction.Spinal curvature is determined according to measured values on an X-ray of a patient before a brace is applied. The stress state in the spine and the spinal deformation are investigated by the finite element method as beam (spine in an elastic ground (soft tissue. Two algorithms are used. The first algorithm deals with the spine above and below the soft tissues, and it is loaded by given displacements of the trunk surface

Scoliosis brace (image)

Science.gov (United States)

... on the back and ribs to push the spine in a straighter position. The brace usually fits snugly around the torso and can come in many styles. In a child who is still growing, bracing is usually recommended ...

Influence of functional knee bracing on the isokinetic and functional tests of anterior cruciate ligament deficient patients.

Directory of Open Access Journals (Sweden)

Niyousha Mortaza

Full Text Available Use of functional knee braces has been suggested to provide protection and to improve kinetic performance of the knee in Anterior cruciate ligament(ACL-injured patients. However, many athletes might refrain from wearing the braces because of the fear of performance hindrance in the playing field. The aim of this study was to examine the effect of three functional knee brace/sleeves upon the isokinetic and functional performance of ACL-deficient and healthy subjects. Six anterior cruciate ligament deficient (29.0 ± 5.3 yrs., 175.2 ± 5.4 cm, and 73.0 ± 10.0 kg and six healthy male subjects (27.2 ± 3.7 yrs., 176.4 ± 6.4 cm, and 70.3 ± 6.9 kg were selected. The effect of a custom-made functional knee brace, and two neoprene knee sleeves, one with four metal supports and one without support were examined via the use of isokinetic and functional tests in four sets (non-braced,wearing functional knee brace,and wearing the sleeves. Cross-over hop and single leg vertical jump test were performed and jump height, and hop distance were recorded. Peak torque to body weight ratio and average power in two isokinetic velocities(60°.s(-1,180°.s(-1 were recorded and the brace/sleeves effect was calculated as the changes in peak torque measured in the brace/sleeves conditions, expressed as a percentage of peak torque measured in non-braced condition. Frequency content of the isokinetic torque-time curves was also analyzed. Wilcoxon signed rank test was used to compare the measured values in four test conditions within each control and ACL-deficient group,and Mann-Whitney U test was used for the comparison between the two groups. No significant differences in peak torque, average power, torque-time curve frequency content, vertical-jump and hop measurements were found within the experimental and the non-braced conditions (p>0.05. Although the examined functional knee brace/sleeves had no significant effect on the knee muscle performance, there have been

Behaviour of Strengthened RC Frames with Eccentric Steel Braced Frames

Directory of Open Access Journals (Sweden)

Kamanli Mehmet

2017-01-01

Full Text Available After devastating earthquakes in recent years, strengthening of reinforced concrete buildings became an important research topic. Reinforced concrete buildings can be strengthened by steel braced frames. These steel braced frames may be made of concentrically or eccentrically indicated in Turkish Earthquake Code 2007. In this study pushover analysis of the 1/3 scaled 1 reinforced concrete frame and 1/3 scaled 4 strengthened reinforced concrete frames with internal eccentric steel braced frames were conducted by SAP2000 program. According to the results of the analyses conducted, load-displacement curves of the specimens were compared and evaluated. Adding eccentric steel braces to the bare frame decreased the story drift, and significantly increased strength, stiffness and energy dissipation capacity. In this strengthening method lateral load carrying capacity, stiffness and dissipated energy of the structure can be increased.

Effect of hip braces on brake response time: Repeated measures designed study.

Science.gov (United States)

Dammerer, Dietmar; Waidmann, Cornelia; Huber, Dennis G; Krismer, Martin; Haid, Christian; Liebensteiner, Michael C

2017-08-01

The question whether or not a patient with a hip brace should drive a car is of obvious importance because the advice given to patients to resume driving is often anecdotal as few scientific data are available on this specific subject. To assess driving ability (brake response time) with commonly used hip braces. Repeated measures design. Brake response time was assessed under six conditions: (1) without a brace (control), (2) with a typical postoperative hip brace with adjustable range of motion and the settings: unrestricted, (3) flexion limited to 70°, (4) extension blocked at 20° hip flexion, (5) both flexion and extension limited (20°/70°) and (6) an elastic hip bandage. Brake response time was assessed using a custom-made driving simulator as used in previous studies. The participants were a convenience sample of able-bodied participants. A total of 70 participants (35 women and 35 men) participated in our study. Mean age was 31.1 (standard deviation: 10.6; range: 21.7-66.4) years. A significant within-subject effect for brake response time was found ( p = 0.009), but subsequent post hoc analyses revealed no significant differences between control and the other settings. Based on our findings, it does not seem mandatory to recommend driving abstinence for patients wearing a hip orthosis. We suggest that our results be interpreted with caution, because (1) an underlying pathological hip condition needs to be considered, (2) the ability to drive a car safely is multifactorial and brake response time is only one component thereof and (3) brake response time measurements were performed only with healthy participants. Clinical relevance Hip braces are used in the context of joint-preserving and prosthetic surgery of the hip. Therefore, clinicians are confronted with the question whether to allow driving a car with the respective hip brace or not. Our data suggest that hip braces do not impair brake response time.

Hardness and depth-dependent microstructure of ion-irradiated MgAl2O4

International Nuclear Information System (INIS)

Zinkle, S.J.

1988-01-01

Stoichiometric polycrystalline magnesium aluminate spinel has been irradiated at 25 and 650/degree/C with 2.4 MeV Mg/sup plus/ ions to a fluence of 1.4 /times/ 10 21 ions/m 2 (/approximately/35 dpa peak damage level). Microindentation hardness measurements and transmission electron microscopy combined with energy dispersive X-ray spectroscopy measurements were used to characterize the irradiation effects. The room-temperature hardness of spinel increased by about 5% after irradiation at both temperatures. There was no evidence for amorphization at either irradiation temperature. Interstitial-type dislocations loops lying on /l brace/110/r brace/ and /l brace/111/r brace/ planes with Burgers vectors were observed at intermediate depths (/approximately/1 μm) along the ion range. The /l brace/111/r brace/ loops are presumably formed from /l brace/111/r brace/ loops as a result of a shear on the anion sublattice. Only about 0.05% of the calculated displacements were visible in the form of loops, which indicates that spinel has a high resistance to aggregate damage accumulation. The peak damage region contained a high density of dislocations tangles. There was no evidence for the formation of voids or vacancy loops. The specimen irradiated at 650/degree/C was denuded of dislocation loops within /approximately/1 μm of the surface. 25 refs., 16 figs., 5 tabs

Fluoroscopic Analysis of Tibial Translation in Anterior Cruciate Ligament Injured Knees With and Without Bracing During Forward Lunge

Science.gov (United States)

Jalali, Maryam; Farahmand, Farzam; Mousavi, Seyed Mohammad Ebrahim; Golestanha, Seyed Ali; Rezaeian, Tahmineh; Shirvani Broujeni, Shahram; Rahgozar, Mehdi; Esfandiarpour, Fateme

2015-01-01

Background: Despite several studies with different methods, the effect of functional knee braces on knee joint kinematics is not clear. Direct visualization of joint components through medical imaging modalities may provide the clinicians with more useful information. Objectives: In this study, for the first time in the literature, video fluoroscopy was used to investigate the effect of knee bracing on the sagittal plane kinematics of anterior cruciate ligament (ACL) injured patients. Patients and Methods: For twelve male unilateral ACL deficient subjects, the anterior tibial translation was measured during lunge exercise in non-braced and braced conditions. Fluoroscopic images were acquired from the subjects using a digital fluoroscopy system with a rate of 10 fps. The image of each frame was scaled using a calibration coin and analyzed in AutoCAD environment. The angle between the two lines, tangent to the posterior cortexes of the femoral and tibial shafts was measured as the flexion angle. For the fluoroscopic images associated with 0°, 15°, 30°, 45° and 60° knee flexion angles, the relative anterior-posterior configuration of the tibiofemoral joint was assessed by measuring the position of landmarks on the tibia and femur. Results: Results indicated that the overall anterior translations of the tibia during the eccentric (down) and concentric (up) phases of lunge exercise were 10.4 ± 1.7 mm and 9.0 ± 2.2 mm for non-braced, and 10.1 ± 3.4 mm and 7.4 ± 2.5 mm, for braced conditions, respectively. The difference of the tibial anterior-posterior translation behaviors of the braced and non-braced knees was not statistically significant. Conclusion: Fluoroscopic imaging provides an effective tool to measure the dynamic behavior of the knee joint in the sagittal plane and within the limitations of this study, the pure mechanical stabilizing effect of functional knee bracing is not sufficient to control the anterior tibial translation of the ACL deficient

Fluoroscopic Analysis of Tibial Translation in Anterior Cruciate Ligament Injured Knees With and Without Bracing During Forward Lunge.

Science.gov (United States)

Jalali, Maryam; Farahmand, Farzam; Mousavi, Seyed Mohammad Ebrahim; Golestanha, Seyed Ali; Rezaeian, Tahmineh; Shirvani Broujeni, Shahram; Rahgozar, Mehdi; Esfandiarpour, Fateme

2015-07-01

Despite several studies with different methods, the effect of functional knee braces on knee joint kinematics is not clear. Direct visualization of joint components through medical imaging modalities may provide the clinicians with more useful information. In this study, for the first time in the literature, video fluoroscopy was used to investigate the effect of knee bracing on the sagittal plane kinematics of anterior cruciate ligament (ACL) injured patients. For twelve male unilateral ACL deficient subjects, the anterior tibial translation was measured during lunge exercise in non-braced and braced conditions. Fluoroscopic images were acquired from the subjects using a digital fluoroscopy system with a rate of 10 fps. The image of each frame was scaled using a calibration coin and analyzed in AutoCAD environment. The angle between the two lines, tangent to the posterior cortexes of the femoral and tibial shafts was measured as the flexion angle. For the fluoroscopic images associated with 0°, 15°, 30°, 45° and 60° knee flexion angles, the relative anterior-posterior configuration of the tibiofemoral joint was assessed by measuring the position of landmarks on the tibia and femur. Results indicated that the overall anterior translations of the tibia during the eccentric (down) and concentric (up) phases of lunge exercise were 10.4 ± 1.7 mm and 9.0 ± 2.2 mm for non-braced, and 10.1 ± 3.4 mm and 7.4 ± 2.5 mm, for braced conditions, respectively. The difference of the tibial anterior-posterior translation behaviors of the braced and non-braced knees was not statistically significant. Fluoroscopic imaging provides an effective tool to measure the dynamic behavior of the knee joint in the sagittal plane and within the limitations of this study, the pure mechanical stabilizing effect of functional knee bracing is not sufficient to control the anterior tibial translation of the ACL deficient patients during lunge exercise.

Highly efficient alkane oxidation catalyzed by [Mn(V)(N)(CN)4](2-). Evidence for [Mn(VII)(N)(O)(CN)4](2-) as an active intermediate.

Science.gov (United States)

Ma, Li; Pan, Yi; Man, Wai-Lun; Kwong, Hoi-Ki; Lam, William W Y; Chen, Gui; Lau, Kai-Chung; Lau, Tai-Chu

2014-05-28

The oxidation of various alkanes catalyzed by [Mn(V)(N)(CN)4](2-) using various terminal oxidants at room temperature has been investigated. Excellent yields of alcohols and ketones (>95%) are obtained using H2O2 as oxidant and CF3CH2OH as solvent. Good yields (>80%) are also obtained using (NH4)2[Ce(NO3)6] in CF3CH2OH/H2O. Kinetic isotope effects (KIEs) are determined by using an equimolar mixture of cyclohexane (c-C6H12) and cyclohexane-d12 (c-C6D12) as substrate. The KIEs are 3.1 ± 0.3 and 3.6 ± 0.2 for oxidation by H2O2 and Ce(IV), respectively. On the other hand, the rate constants for the formation of products using c-C6H12 or c-C6D12 as single substrate are the same. These results are consistent with initial rate-limiting formation of an active intermediate between [Mn(N)(CN)4](2-) and H2O2 or Ce(IV), followed by H-atom abstraction from cyclohexane by the active intermediate. When PhCH2C(CH3)2OOH (MPPH) is used as oxidant for the oxidation of c-C6H12, the major products are c-C6H11OH, c-C6H10O, and PhCH2C(CH3)2OH (MPPOH), suggesting heterolytic cleavage of MPPH to generate a Mn═O intermediate. In the reaction of H2O2 with [Mn(N)(CN)4](2-) in CF3CH2OH, a peak at m/z 628.1 was observed in the electrospray ionization mass spectrometry, which is assigned to the solvated manganese nitrido oxo species, (PPh4)[Mn(N)(O)(CN)4](-)·CF3CH2OH. On the basis of the experimental results the proposed mechanism for catalytic alkane oxidation by [Mn(V)(N)(CN)4](2-)/ROOH involves initial rate-limiting O-atom transfer from ROOH to [Mn(N)(CN)4](2-) to generate a manganese(VII) nitrido oxo active species, [Mn(VII)(N)(O)(CN)4](2-), which then oxidizes alkanes (R'H) via a H-atom abstraction/O-rebound mechanism. The proposed mechanism is also supported by density functional theory calculations.

Chinese Adaptation of the Bad Sobernheim Stress Questionnaire for Patients With Adolescent Idiopathic Scoliosis Under Brace Treatment.

Science.gov (United States)

Xu, Ximing; Wang, Fei; Yang, Mingyuan; Huang, Qikai; Chang, Yifan; Wei, Xianzhao; Bai, Yushu; Li, Ming

2015-08-01

Bad Sobernheim Stress Questionnaire (BSSQ)-Deformity and BSSQ-Brace are the most widely used instruments for evaluating stress levels in adolescent idiopathic scoliosis (AIS) patients under brace treatment, and good reliability and validity have been demonstrated across different cultures. Great stress has been found among many adolescents, becoming a major concern for professionals. However, no previous research has addressed the cultural adaptations and psychometric testing of BSSQ-Deformity and BSSQ-Brace in China or the stress levels in AIS patients. The purposes of our study were to evaluate the cross-cultural adaptation and validation of the BSSQ-Deformity and BSSQ-Brace and to investigate stress levels in Chinese (AIS) patients under brace treatment.The original (German) versions of BSSQ-Deformity and BSSQ-Brace were cross-culturally translated according to international guidelines. Psychometric properties such as reliability and construct validity were tested. Eighty-six AIS patients were included in our study, and 50 patients paid a second visit 3 to 7 days later to test reproducibility. Cronbach α and the intraclass coefficient were determined to assess internal consistency and reproducibility. Scoliosis Research Society patient questionnaire-22 (SRS-22) was applied to evaluate construct validity.The mean BSSQ-Deformity and BSSQ-Brace scores were 15.3 and 13.4 points, respectively. Severe stress was observed in 12% of patients due to brace treatment. Item analysis demonstrated that each item was scored under a normal distribution with no redundancy. Psychometric analysis revealed excellent internal consistency (Cronbach α = 0.85 and 0.80, respectively) and reproducibility (intraclass correlation coefficient = 0.85 and 0.90, respectively) for BSSQ-Deformity and BSSQ-Brace. The correlation coefficients of BSSQ-Deformity, BSSQ-Brace and SRS-22 were 0.48 and 0.63, respectively.In conclusion, BSSQ-Deformity and BSSQ-Brace have been successfully

Brace technology thematic series - The Sforzesco and Sibilla braces, and the SPoRT (Symmetric, Patient oriented, Rigid, Three-dimensional, active concept

Directory of Open Access Journals (Sweden)

Marchini Gianfranco

2011-05-01

Full Text Available Abstract Background Bracing is an effective strategy for scoliosis treatment, but there is no consensus on the best type of brace, nor on the way in which it should act on the spine to achieve good correction. The aim of this paper is to present the family of SPoRT (Symmetric, Patient-oriented, Rigid, Three-dimensional, active braces: Sforzesco (the first introduced, Sibilla and Lapadula. Methods The Sforzesco brace was developed following specific principles of correction. Due to its overall symmetry, the brace provides space over pathological depressions and pushes over elevations. Correction is reached through construction of the envelope, pushes, escapes, stops, and drivers. The real novelty is the drivers, introduced for the first time with the Sforzesco brace; they allow to achieve the main action of the brace: a three-dimensional elongation pushing the spine in a down-up direction. Brace prescription is made plane by plane: frontal (on the "slopes", another novelty of this concept, i.e. the laterally flexed sections of the spine, horizontal, and sagittal. The brace is built modelling the trunk shape obtained either by a plaster cast mould or by CAD-CAM construction. Brace checking is essential, since SPoRT braces are adjustable and customisable according to each individual curve pattern. Treatment time and duration is individually tailored (18-23 hours per day until Risser 3, then gradual reduction. SEAS (Scientific Exercises Approach to Scoliosis exercises are a key factor to achieve success. Results The Sforzesco brace has shown to be more effective than the Lyon brace (matched case/control, equally effective as the Risser plaster cast (prospective cohort with retrospective controls, more effective than the Risser cast + Lyon brace in treating curves over 45 degrees Cobb (prospective cohort, and is able to improve aesthetic appearance (prospective cohort. Conclusions The SPoRT concept of bracing (three-dimensional elongation pushing in

ARTHROMETRIC EVALUATION OF STABILIZING EFFECT OF KNEE FUNCTIONAL BRACING AT DIFFERENT FLEXION ANGLES

Directory of Open Access Journals (Sweden)

Saeedeh Seyed Mohseni

2009-06-01

Full Text Available Previous in-vivo investigations on the stabilizing efficacy of knee bracing for ACL reconstructed patients have been often limited to 20-30 degrees of knee flexion. In this study, the effectiveness of a uniaxial hinged functional brace to improve the knee stability was assessed at 30, 60 and 90 degrees of knee flexion. Arthrometry tests were conducted on 15 healthy subjects before and following wearing the brace and the tibial displacements were measured at up to 150 N anterior forces. Results indicated that functional bracing has a significant stabilizing effect throughout the range of knee flexion examined (p < 0.05. The rate of effectiveness, however, was not consistent across the flexion range, e.g., 50% at 30 degrees and only 4% at 90 degrees. It was suggested that accurate sizing and fitting as well as attention to correct hinge placement relative to the femoral condyles can limit brace migration and improve its effectiveness in mid and deep knee flexion. With using adaptive limb fittings, through flexible pads, and a polycentric joint a more significant improvement of the overall brace performance and efficacy might be obtained

The effects of a supportive knee brace on leg performance in healthy subjects.

Science.gov (United States)

Veldhuizen, J W; Koene, F M; Oostvogel, H J; von Thiel, T P; Verstappen, F T

1991-12-01

Eight healthy volunteers were fitted with a supportive knee brace (Push Brace 'Heavy') to one knee for a duration of four weeks wherein they were tested before, during and after the application to establish the effect of bracing on performance. The tests consisted of isokinetic strength measurement of knee flexion and extension, 60 meter dash, vertical jump height and a progressive horizontal treadmill test until exhaustion (Vmax) with determination of oxygen uptake, heart rate and plasma lactate concentration. Wearing the brace for one day, the performance indicators showed a decline compared with the test before application (base values). Sprint time was 4% longer (p less than 0.01) and Vmax 6% slower (p less than 0.01). Peak torque of knee flexion at 60 and 240 deg.sec-1 was 6% (p less than 0.05) respectively 9% (p less than 0.05) less. Peak extension torque at 60 deg.sec-1 was 9% less (p less than 0.05). While wearing the brace for four weeks, the test performances were practically identical to their base values. After removal of the brace, all test parameters were statistically similar to the base values. Heart rate at submaximal exercise levels was even lower (p less than 0.05). In conclusion, performance in sports with test-like exercise patterns is not affected by the brace tested. Bracing does not "weaken the knee" as it is widely believed in sports practice.

Synthesis and molecular structure of [Cu(NH3)4][Ni(CN)4]: A missing piece in the [Cu(NH3)n][Ni(CN)4] story

Science.gov (United States)

Solanki, Dina; Hogarth, Graeme

2015-11-01

Reaction of CuCl2·2H2O and K2[Ni(CN)4]·2H2O in aqueous ammonia gave blue rod-like crystals of [Cu(NH3)4][Ni(CN)4]. An X-ray crystallographic reveals that square-planar anions and cations are weakly associated through coordination of a cis pair of cyanide ligands to copper, with one short and one long contact and thus the copper centre is best described as a square-based pyramid. Crystals lose ammonia readily upon removal from the solvent and this has been probed by TGA and DSC measurements. For comparison we have also re-determined the structure of the related ethylenediamine (en) complex [Cu(en)2][Ni(CN)4] at 150 K. This consists of a 1D chain in which a trans pair of cyanide ligands bind to copper such that the latter has an overall tetragonally distorted octahedral coordination geometry.

A new type of one-dimensional compound: Structure of Nb4(Te2)4Te4I

International Nuclear Information System (INIS)

Deng Shuiquan; Zhuang Honghui; Lu Canzhong; Huang Jinshun; Huang Jingling

1993-01-01

The new infinite-chain niobium telluride iodide has been prepared by reaction of the elements at 893 K. Nb 4 (Te 2 ) 4 Te 4 I represents a new one-dimensional structure type. The structure consists of [Nb 4 (Te 2 ) 4 Te 4 I] ∞ chains which are formed by the four-nuclear butterfly cluster units 'Nb 4 (Te 2 ) 4 Te 4 ' with the I atoms bridging between different cluster units. (orig.)

Supine Lateral Bending Radiographs Predict the Initial In-brace Correction of the Providence Brace in Patients With Adolescent Idiopathic Scoliosis

DEFF Research Database (Denmark)

Ohrt-Nissen, Søren; Hallager, Dennis Winge; Gehrchen, Poul Martin

2016-01-01

 ± 10°). Mean difference for thoracic curves was 0.2° (LOA ± 8°), for thoracolumbar/lumbar curves 0.9° (LOA ± 10°) and for double major curves 0.4° (LOA ± 16). CONCLUSION: SLBR provide a close estimation to the expected in-brace correction with a mean difference of less than one degree. SLRB could...

"Brace Technology" Thematic Series - The Lyon approach to the conservative treatment of scoliosis

Directory of Open Access Journals (Sweden)

Lecante Cyril

2011-03-01

Full Text Available Abstract The Lyon Brace, or adjustable multi-shell brace, has been used for more than 60 years. The use and function of the Lyon Brace includes: - The utilization of one or two corrective plaster casts, which enables a true lengthening of the concave ligaments. - An oriented CAD-CAM moulding in 3D auto correction after the removal of the plaster cast. - A blueprint adapted to Lenke's classification. - A specific physiotherapy program. Background Pierre Stagnara created the Lyon Brace in 1947. The brace has the following characteristics: - It adjusts to allow for a child's growth of up to seven centimetres and for an increase in weight of up to seven kilograms. - It is 'active' in that the rigidity of the PMM (polymetacrylate of methyl structure stimulates the user to auto-correct. The active axial auto-correction decreases the pressures of the brace on the trunk. - It is decompressive in that the effect of extension between the two pelvic and scapular girdles decreases the pressure on the intervertebral disc allowing for more effective pushes in the other planes. - It is symmetrical making it both more aesthetically pleasing and easier to build. - It is stable at both shoulders and pelvic girdle, facilitating the intermediate 3D corrections. - It is transparent. The pressure of the shells on the skin can be directly controlled so "pads" are usually not necessary. Brace description Two metal bars are fixed vertically, one anterior the other posterior and all shells are attached from the bottom to the top in this order: - Two pelvic shells ensure an optimal stability of the brace. - One lumbar shell T12-L4, which can be either independent or extending, at the abdominal chondrocostal level. - One thoracic shell at the level of the thoracic convexity. - One opposite thoracic shell used as a counter push. - One shoulder balance shell on the side of the thoracic convexity. Long term follow up results This is a retrospective study of 1,338 completed

Evaluation of Long Leg Braces in Regard to Biomechanical, Clinival and Technical Orthopedic\\'s Fundamentals

Directory of Open Access Journals (Sweden)

Reza Vahhab-Kashani

2006-01-01

Full Text Available Objective: In some clients, for lower extremity, long leg brace, is prescribed. Then it will be fabricated bye orthotist and worn by patient. According to clinical principles, the brace should be as fit as possible with limb form. Also, an individual, walks and sits with his or her brace. Brace functions around joint motion axis. Quality and exact place of movement is define by biomechanical principles. Therefore, brace should be adapted with biochemical principles of the limb. Materials & Methods: A brace is made up several components which are assembled through acceptable technical orthopaedic methods and this procedure should be done without omission or neglect. If orthotist has enough scientific knowledge and observes all details, he or she will fabricate a perfect brace. We considered fabricated long leg brace according to this principle to meet study objectives while answering some question of study, we will disguss on the finding of our assessment. Also, we examine some possible deviations with accured by unsuitable fabrication, more over we suggest that some failur in designing procedure which leads to such deviation material and methods: In this descriptive analytic cross sectional study, long leg braces of 193 clients who were selected by random stratified sampling method, were evaluated by a previously designed questionare . Results: A. By assessment of 7 variables, it was revealed that 28.86% of manufactured braces, was not adapted with defined fundamentals, biomechanically. B. By evaluation of 9 variables, it was made known that 30 % of produced braces was not adapted with established fabricating fundamentals of lower limb braces clinically. C. By examination of 23 variables it was find out that 25.4% of fabricated braces, it was observed, which has some failures by attention to defined fabricating technical orthopaedic fundamentals. Conclusion: All the details, fabrication and design procedures should be carefully observed and

Two related lithium calixarene complexes, [p-tert-butylcalix[4]arene(OMe)(OH)2(OLi)](2).4MeCN and {p-tert-butylcalix[4]arene(OH)2(OLi)[OLi(NCMe)2]}(2).8MeCN, determined using synchrotron radiation.

Science.gov (United States)

Lee, Darren S; Elsegood, Mark R J; Redshaw, Carl; Zhan, Shuzhong

2009-08-01

The crystal structures of acetonitrile solvates of two related lithium calixarene complexes have been determined by low-temperature single-crystal X-ray diffraction using synchrotron radiation. Bis(mu-5,11,17,23-tetra-tert-butyl-26,28-dihydroxy-25-methoxy-27-oxidocalix[4]arene)dilithium(I) acetonitrile tetrasolvate, [Li2(C45H57O4)2].4C2H3N or [p-tert-butylcalix[4]arene(OMe)(OH)2(OLi)](2).4MeCN, (I), crystallizes with the complex across a centre of symmetry and with four molecules of unbound acetonitrile of crystallization per complex. Tetraacetonitrilebis(mu-5,11,17,23-tetra-tert-butyl-26,28-dihydroxy-25,27-dioxidocalix[4]arene)tetralithium(I) acetonitrile octasolvate, [Li4(C44H54O4)2(C2H3N)4].8C2H3N or {p-tert-butylcalix[4]arene(OH)2(OLi)[OLi(NCMe)2]}(2).8MeCN, (II), also crystallizes with the complex lying across a centre of symmetry and contains eight molecules of unbound acetonitrile per complex plus four more directly bound to two of the lithium ions, two on each ion. The cores of both complexes are partially supported by O-H...O hydrogen bonds. The methoxy methyl groups in (I) prevent the binding of any more than two Li+ ions, while the corresponding two O-atom sites in (II) bind an extra Li(+) ion each, making four in total. The calixarene cone adopts an undistorted cone conformation in (I), but an elliptical one in (II).

Effects of Prophylactic Knee Bracing on Lower Limb Kinematics, Kinetics, and Energetics During Double-Leg Drop Landing at 2 Heights.

Science.gov (United States)

Ewing, Katie A; Begg, Rezaul K; Galea, Mary P; Lee, Peter V S

2016-07-01

Anterior cruciate ligament (ACL) injuries commonly occur during landing maneuvers. Prophylactic knee braces were introduced to reduce the risk of ACL injuries, but their effectiveness is debated. We hypothesized that bracing would improve biomechanical factors previously related to the risk of ACL injuries, such as increased hip and knee flexion angles at initial contact and at peak vertical ground-reaction force (GRF), increased ankle plantar flexion angles at initial contact, decreased peak GRFs, and decreased peak knee extension moment. We also hypothesized that bracing would increase the negative power and work of the hip joint and would decrease the negative power and work of the knee and ankle joints. Controlled laboratory study. Three-dimensional motion and force plate data were collected from 8 female and 7 male recreational athletes performing double-leg drop landings from 0.30 m and 0.60 m with and without a prophylactic knee brace. GRFs, joint angles, moments, power, and work were calculated for each athlete with and without a knee brace. Prophylactic knee bracing increased the hip flexion angle at peak GRF by 5.56° (P knee flexion angle at peak GRF by 4.75° (P = .001), and peak hip extension moment by 0.44 N·m/kg (P knee and ankle. No differences in peak GRFs and peak knee extension moment were observed with bracing. The application of a prophylactic knee brace resulted in improvements in important biomechanical factors associated with the risk of ACL injuries. Prophylactic knee braces may help reduce the risk of noncontact knee injuries in recreational and professional athletes while playing sports. Further studies should investigate different types of prophylactic knee braces in conjunction with existing training interventions so that the sports medicine community can better assess the effectiveness of prophylactic knee bracing. © 2016 The Author(s).

The SPoRT concept of bracing for idiopathic scoliosis.

Science.gov (United States)

Zaina, Fabio; Fusco, Claudia; Atanasio, Salvatore; Negrini, Stefano

2011-01-01

The SPoRT (acronym: Symmetrical, Patient-oriented, Rigid, Three-dimensional, active) concept of bracing is a new way to build braces based on our 20 years of experience and the biomechanical principles of scoliosis correction, inclusive of the Sibilla and Sforzesco braces. The concept always requires a custom brace, which is made according to the patient's individual requirements. New technologies such as CAD-CAM can be applied, and often for better results, without the customary use of prebuilt forms whose measurements are stored in databases. Once the initial draft brace is completed, a final test must be made on the patient to modify and adapt it, depending on his or her real interaction between the body and the brace. The results that are today available on the SPoRT concept relate to the Sforzesco brace and are necessarily short-term, because the first treated patients are now reaching the fourth-year follow-up examination and haven't yet completed their treatments. On the basis of the initial evaluations, we can state that the Sforzesco brace is more effective than the Lyon brace after 6 months of treatment and that the Sforzesco brace is equally effective as the Risser Plast brace.

Braces

Science.gov (United States)

... wear a retainer , which is a small, hard piece of plastic with metal wires or a thin piece of plastic shaped like a mouthguard. Retainers make ... More on this topic for: Kids Word! Braces Going to the Dentist Going to the Orthodontist Taking ...

MINIMUM BRACING STIFFNESS FOR MULTI-COLUMN SYSTEMS: THEORY

OpenAIRE

ARISTIZÁBAL-OCHOA, J. DARÍO

2011-01-01

A method that determines the minimum bracing stiffness required by a multi-column elastic system to achieve non-sway buckling conditions is proposed. Equations that evaluate the required minimum stiffness of the lateral and torsional bracings and the corresponding “braced" critical buckling load for each column of the story level are derived using the modified stability functions. The following effects are included: 1) the types of end connections (rigid, semirigid, and simple); 2) the bluepr...

Effect of uniaxial strain on adatom diffusion across {l_brace}1 1 1{r_brace}-faceted step

Energy Technology Data Exchange (ETDEWEB)

Yang Jianyu, E-mail: wuliyangjianyu@yahoo.com.cn [Department of Maths and Physics, Hunan Institute of Engineering, Donghu Street, Xiangtan 411104 (China); Hu Wangyu, E-mail: Wangyuhu2001@yahoo.com.cn [Department of Applied Physics, Hunan University, Changsha 410082 (China); Tang Jianfeng [Department of Applied Physics, Hunan Agricultural University, Changsha 410128 (China)

2011-02-01

Diffusion of Pt adatom across the strained {l_brace}1 1 1{r_brace}-faceted step is studied by embedded atom method along with nudged elastic band method. For adatom on the flat (1 1 1) surface, the anisotropic diffusion behavior is found as the uniaxial strain is imposed. For the strained {l_brace}1 1 1{r_brace}-faceted step, our results show that the maximum energy barrier for adatom crossing step edge remains approximately constant as the strain varied from -1.0% to 1.0%, and there is a rise as the larger uniaxial strain is applied. The calculated energy barrier for adatom diffusion along the step edge increases with increasing tensile strain, and the slope of the straight line is small.

Thermophysical properties of binary mixtures of {l_brace}ionic liquid 2-hydroxy ethylammonium acetate + (water, methanol, or ethanol){r_brace}

Energy Technology Data Exchange (ETDEWEB)

Alvarez, Victor H. [School of Chemical Engineering, State University of Campinas (UNICAMP), P.O. Box 6066, 13083-970 Campinas-SP (Brazil); Chemical Engineering Department, ETSE, University of Santiago de Compostela (USC), P.O. Box 15782, Santiago de Compostela (Spain); Mattedi, Silvana [Chemical Engineering Department, Polytechnic School, Federal University of Bahia (UFBA), 40210-630 Salvador-BA (Brazil); Martin-Pastor, Manuel [Unidade de Resonancia Magnetica, RIAIDT, edif. CACTUS, University of Santiago de Compostela (USC), P.O. Box 15706, Santiago de Compostela (Spain); Aznar, Martin [School of Chemical Engineering, State University of Campinas (UNICAMP), P.O. Box 6066, 13083-970 Campinas-SP (Brazil); Iglesias, Miguel, E-mail: miguel.iglesias@usc.es [Chemical Engineering Department, ETSE, University of Santiago de Compostela (USC), P.O. Box 15782, Santiago de Compostela (Spain)

2011-07-15

Research highlights: > This paper reports the density and speed of sound data of binary mixtures {l_brace}2-hydroxy ethylammonium acetate + (water, or methanol, or ethanol){r_brace} measured between the temperatures (298.15 and 313.15) K at atmospheric pressure. > The aggregation, dynamic behavior, and hydrogen-bond network were studied using thermo-acoustic, X-ray, and NMR techniques. > The Peng-Robinson equation of state, coupled with the Wong-Sandler mixing rule using the COSMO-SAC model predicted the density of the solutions with relative mean deviations below than 3.0%. - Abstract: In this work, density and speed of sound data of binary mixtures of an ionic liquid consisting of {l_brace}2-hydroxy ethylammonium acetate (2-HEAA) + (water, methanol, or ethanol){r_brace} have been measured throughout the entire concentration range, from the temperature of (288.15 to 323.15) K at atmospheric pressure. The excess molar volumes, variations of the isentropic compressibility, the apparent molar volume, isentropic apparent molar compressibility, and thermal expansion coefficient were calculated from the experimental data. The excess molar volumes were negative throughout the whole composition range. Compressibility data in combination with low angle X-ray scattering and NMR measurements proved that the presence of micelles formed due to ion pair interaction above a critical concentration of the ionic liquid in the mixtures. The Peng-Robinson equation of state coupled with the Wong-Sandler mixing rule and COSMO-SAC model was used to predict densities and the calculated deviations were lower than 3%, for binary mixtures in all composition range.

Long-term results after Boston brace treatment in late-onset juvenile and adolescent idiopathic scoliosis

Directory of Open Access Journals (Sweden)

Gunderson Ragnhild

2011-08-01

Full Text Available Abstract Background It is recommended that research in patients with idiopathic scoliosis should focus on short- and long-term patient-centred outcome. The aim of the present study was to evaluate outcome in patients with late-onset juvenile or adolescent idiopathic scoliosis 16 years or more after Boston brace treatment. Methods 272 (78% of 360 patients, 251 (92% women, responded to follow-up examination at a mean of 24.7 (range 16 - 32 years after Boston brace treatment. Fifty-eight (21% patients had late-onset juvenile and 214 had adolescent idiopathic scoliosis. All patients had clinical and radiological examination and answered a standardised questionnaire including work status, demographics, General Function Score (GFS (100 - worst possible and Oswestry Disability Index (ODI (100 - worst possible, EuroQol (EQ-5D (1 - best possible, EQ-VAS (100 - best possible, and Scoliosis Research Society - 22 (SRS - 22 (5 - best possible. Results The mean age at follow-up was 40.4 (31-48 years. The prebrace major curve was in average 33.2 (20 - 57°. At weaning and at the last follow-up the corresponding values were 28.3 (1 - 58° and 32.5 (7 - 80°, respectively. Curve development was similar in patients with late-onset juvenile and adolescent start. The prebrace curve increased > 5° in 31% and decreased > 5° in 26%. Twenty-five patients had surgery. Those who did not attend follow-up (n = 88 had a lower mean curve at weaning: 25.4 (6-53°. Work status was 76% full-time and 10% part-time. Eighty-seven percent had delivered a baby, 50% had pain in pregnancy. The mean (SD GFS was 7.4 (10.8, ODI 9.3 (11.0, EQ-5D 0.82 (0.2, EQ-VAS 77.6 (17.8, SRS-22: pain 4.1 (0.8, mental health 4.1 (0.6, self-image 3.7 (0.7, function 4.0 (0.6, satisfaction with treatment 3.7 (1.0. Surgical patients had significantly reduced scores for SRS-physical function and self-image, and patients with curves ≥ 45° had reduced self-image. Conclusion Long-term results were

Treatment of thoraco-lumbar curves in adolescent females affected by idiopathic scoliosis with a progressive action short brace (PASB: assessment of results according to the SRS committee on bracing and nonoperative management standardization criteria

Directory of Open Access Journals (Sweden)

Perisano Carlo

2009-09-01

Full Text Available Abstract Background The effectiveness of conservative treatment of scoliosis is controversial. Some studies suggest that brace is effective in stopping curve progression, whilst others did not report such an effect. The purpose of the present study was to effectiveness of Progressive Action Short Brace (PASB in the correction of thoraco-lumbar curves, in agreement with the Scoliosis Research Society (SRS Committee on Bracing and Nonoperative Management Standardisation Criteria. Methods Fifty adolescent females (mean age 11.8 ± 0.5 years with thoraco-lumbar curve and a pre-treatment Risser score ranging from 0 to 2 have been enrolled. The minimum duration of follow-up was 24 months (mean: 55.4 ± 44.5 months. Antero-posterior radiographs were used to estimate the curve magnitude (CM and the torsion of the apical vertebra (TA at 5 time points: beginning of treatment (t1, one year after the beginning of treatment (t2, intermediate time between t1 and t4 (t3, end of weaning (t4, 2-year minimum follow-up from t4 (t5. Three situations were distinguished: curve correction, curve stabilisation and curve progression. The Kruskal Wallis and Spearman Rank Correlation tests have been used as statistical tests. Results CM mean value was 29,30 ± 5,16 SD at t1 and 14,67 ± 7,65 SD at t5. TA was 12.70 ± 6,14 SD at t1 and 8,95 ± 5,82 at t5. The variation between measures of Cobb and Perdriolle degrees at t1,2,3,4,5 and between CM t5-t1 and TA t5-t1 were significantly different. Curve correction was accomplished in 94% of patients, whereas a curve stabilisation was obtained in 6% of patients. Conclusion The PASB, due to its peculiar biomechanical action on vertebral modelling, is highly effective in correcting thoraco-lumbar curves.

New Generation Lockable Knee Brace

Science.gov (United States)

2000-01-01

A knee brace that uses Space Shuttle propulsion technology has moved a step closer to being available to help knee injury and stroke patients and may possibly benefit patients with birth defects, spinal cord injuries, and post-polio conditions. After years of hard work, inventors at NASA's Marshall Space Flight Center (MSFC) in Huntsville, Alabama, have turned over the final design and prototype to industry partners at Horton's Orthotic Lab in Little Rock, Arkansas for further clinical testing. The device, called the Selectively Lockable Knee Brace, may mean faster, less painful rehabilitation for patients by allowing the knee to move when weight is not on the heel. Devices currently on the market lock the knee in a rigid, straight-leg position, or allow continuous free motion. The knee brace is just one example of how space technology is being used to improve the lives of people on Earth. NASA's MSFC inventors Michael Shadoan and Neill Myers are space propulsion engineers who use the same mechanisms and materials to build systems for rockets that they used to design and develop the knee brace.

Measurements of the critical parameters for {l_brace}xNH{sub 3} + (1 - x)H{sub 2}O{r_brace} with x = (0.9098, 0.7757, 0.6808)

Energy Technology Data Exchange (ETDEWEB)

Sakabe, A.; Arai, D. [Centre for Multiscale Mechanics and Mechanical Systems, Keio University, Yokohama 223-8522 (Japan); Miyamoto, H. [Department of Mechanical Systems Engineering, Toyama Prefectural University, Imizu 939-0398 (Japan)], E-mail: miyamoto@pu-toyama.ac.jp; Uematsu, M. [Centre for Multiscale Mechanics and Mechanical Systems, Keio University, Yokohama 223-8522 (Japan)

2008-10-15

Measurements of the critical parameters for {l_brace}xNH{sub 3} + (1 - x)H{sub 2}O{r_brace} with x = (0.9098, 0.7757, 0.6808) were carried out by using a metal-bellows variable volumometer with an optical cell. The expanded uncertainties (k = 2) in temperature, pressure, density, and composition measurements have been estimated to be less than 3.2 mK, 3.2 kPa, 0.3 kg . m{sup -3}, and 8.8 . 10{sup -4}, respectively. In each mole fraction, the critical temperature T{sub c} was first determined on the basis of the intensity of the critical opalescence. The critical pressure p{sub c} and critical density {rho}{sub c} were then determined as the point at which the meniscus disappears on the isotherm at T = T{sub c}. The expanded uncertainties (k = 2) in the present critical parameters have also been estimated. Comparisons of the present values with the literature data as well as the calculated values afforded using the equation of state are also presented.

Initial experience with the providence nighttime bracing in adolescent idiopathic scoliosis

DEFF Research Database (Denmark)

Quisth, Lena; Beuschau, Inge; Simony, A.

2015-01-01

Background: Since 2008 the primary non-surgical treatment of adolescent idiopathic scoliosis (AIS) in the southern part of Denmark, went from full-time bracing with Boston brace, to Providence nighttime bracing. Aim: To evaluate the effectiveness of nighttime bracing, with the Providence brace...... with the Providence nighttime brace and an acceptable 18 % failure rate. The nighttime brace is an excellent alternative to standard conservative treatment, and reduces the need for physiotherapy after brace termination. The patients tolerate the nighttime brace treatment well, and compliance within the cohort......, in AIS. Method: Patients diagnosed with AIS. With an apex from TH7 and below and with a cobb angel between 20-45 degrees. The patients were evaluated every 6 months with standing x-rays and the brace treatment was continued until two years post menarche. Cobb angle of the major curve pretreatment, in...

CO gas sensing properties of In_4Sn_3O_1_2 and TeO_2 composite nanoparticle sensors

International Nuclear Information System (INIS)

Mirzaei, Ali; Park, Sunghoon; Sun, Gun-Joo; Kheel, Hyejoon; Lee, Chongmu

2016-01-01

Highlights: • In4Sn3O12–TeO2 composite nanoparticles were synthesized via a facile hydrothermal route. • The response of the In4Sn3O12–TeO2 composite sensor to CO was stronger than the pristine In4Sn3O12 sensor. • The response of the In4Sn3O12–TeO2 composite sensor to CO was faster than the pristine In4Sn3O12 sensor. • The improved sensing performance of the In4Sn3O12–TeO2 nanocomposite sensor is discussed in detail. • The In4Sn3O12-based nanoparticle sensors showed selectivity to CO over NH3, HCHO and H2. - Abstract: A simple hydrothermal route was used to synthesize In_4Sn_3O_1_2 nanoparticles and In_4Sn_3O_1_2–TeO_2 composite nanoparticles, with In(C_2H_3O_2)_3, SnCl_4, and TeCl_4 as the starting materials. The structure and morphology of the synthesized nanoparticles were examined by X-ray diffraction and scanning electron microscopy (SEM), respectively. The gas-sensing properties of the pure and composite nanoparticles toward CO gas were examined at different concentrations (5–100 ppm) of CO gas at different temperatures (100–300 °C). SEM observation revealed that the composite nanoparticles had a uniform shape and size. The sensor based on the In_4Sn_3O_1_2–TeO_2 composite nanoparticles showed stronger response to CO than its pure In_4Sn_3O_1_2 counterpart. The response of the In_4Sn_3O_1_2–TeO_2 composite-nanoparticle sensor to 100 ppm of CO at 200 °C was 10.21, whereas the maximum response of the In_4Sn_3O_1_2 nanoparticle sensor was 2.78 under the same conditions. Furthermore, the response time of the composite sensor was 19.73 s under these conditions, which is less than one-third of that of the In_4Sn_3O_1_2 sensor. The improved sensing performance of the In_4Sn_3O_1_2–TeO_2 nanocomposite sensor is attributed to the enhanced modulation of the potential barrier height at the In_4Sn_3O_1_2–TeO_2 interface, the stronger oxygen adsorption of p-type TeO_2, and the formation of preferential adsorption sites.

Dynamic extensor brace for lateral epicondylitis.

NARCIS (Netherlands)

Faes, M.C.; Akker, B. van den; Lint, J.A. de; Kooloos, J.G.M.; Hopman, M.T.E.

2006-01-01

Lateral epicondylitis (tennis elbow) is a common, often disabling ailment. Based on the failure of current therapies, a new dynamic extensor brace has been developed. In this study, the effects of application of this brace for 3 months on the most important and disabling symptoms of patients with

Outcome of intensive outpatient rehabilitation and bracing in an adult patient with Scheuermann’s disease evaluated by radiologic imaging—a case report

Directory of Open Access Journals (Sweden)

Hagit Berdishevsky

2016-10-01

Full Text Available Abstract Background No studies examine the efficacy of intensive specific physical therapy (PT exercises along with brace for the adult with Scheuermann’s kyphosis (SK. The aim of this study was to examine the effects of intensive PT based on the Barcelona Scoliosis Physical Therapy School (BSPTS and SpinoMed brace on a 76-year-old female with SK. Case Description A 76-year-old female, diagnosed with SK as an adolescent, presented in October 2014 with thoracic hyperkyphosis T1 to T12 Cobb angle of 85° and lumbar hyper lordosis L1 to L5 Cobb angle of 70°. Lumbar scoliosis T12-L5 with 21° Cobb and vertebral rotation 2. Trunk translation in the sagittal plan was 4.5 cm. Intermittent low back pain 6/10 at worst. Quality-of-life score was 3.8 (SRS 22 questionnaire. Method The PT regimen included one-hour Schroth exercise sessions three times per week for 6 months. In addition, a home exercise program (HEP was recommended. Patient also wore a SpinoMed brace for 2 h per day. All tests and measurements were recorded before and after treatment. Results After a six-month treatment period the kyphosis Cobb angle was reduced to 70° and the lordosis Cobb angle improved to 57°. A recent x-ray (October 2015 showed another improvement in the sagittal plane with thoracic kyphosis measuring 64° and lumbar lordosis 55°. Lumbar curvature decreased to 12° and vertebral rotation to 1. The quality-of-life score showed improvement with a score of 4.5 on the SRS 22. Pain score diminished to 2. Trunk deviation improved by 2.2 cm. Conclusion These findings suggest that intensive and specific PT and bracing were successful for the treatment of this adult patient with SK.

The Effects of Counterforce Brace Size on the Wrist Range of Motility, Pain, Grip & Wrist Extension Sterngth in Normal Subjects and Patients with Tennis Elbow

Directory of Open Access Journals (Sweden)

Ali Asghar Jameh-Bozorgi

2006-04-01

Full Text Available Objective: Counter force brace is one of the most usefull treatments for lateral opicondylitis (Tennis elbow because it decreases grip pain and increases the power of grip, power of wrist extension and Wrist Range of Motility. The purpose of this quasi experimental (repeated measurementsstudy was to determine the effect of 3 counterforce brace sizes on the wrist R.O.M, grip and wrist extension strength and pain intensity in two groups of healthy subjects and patients with tennis elbow. Materials & Methods: 18 normal subjects & 18 patients with tennis elbow were selected simple conveniently and were tested with no brace and 3 size of counterforce (1,2 and 3 inches. The R.O.M , strength and pain intensity were measured by jamar goniometry and Nicholas MMT dynamometry & VAS, respectively. Results: 1 With all sizes there was a significant decrease of R.O.M on normal subjects but no significant difference in patients. 2 There was a significant decrease of grip strength with 1-inch brace in normal subjects but a significant increase of grip strength with 2 and 3-inch brace in patiens. 3 All sizes of brace caused significant decrease of extension strength in normal subjects but increase in patients. 4All size caused significant decrease of pain intensity that was more considerable in the case of 2 and 3 inch size. Conclusion: The results shows that the counterforce brace may be considered as an effective treatment for increasing strength and decreasing pain in patients with tennis elbow.

Specific exercises reduce brace prescription in adolescent idiopathic scoliosis: a prospective controlled cohort study with worst-case analysis.

Science.gov (United States)

Negrini, Stefano; Zaina, Fabio; Romano, Michele; Negrini, Alessandra; Parzini, Silvana

2008-06-01

To compare the effect of Scientific Exercises Approach to Scoliosis (SEAS) exercises with "usual care" rehabilitation programmes in terms of the avoidance of brace prescription and prevention of curve progression in adolescent idiopathic scoliosis. Prospective controlled cohort observational study. Seventy-four consecutive outpatients with adolescent idiopathic scoliosis, mean 15 degrees (standard deviation 6) Cobb angle, 12.4 (standard deviation 2.2) years old, at risk of bracing who had not been treated previously. Thirty-five patients were included in the SEAS exercises group and 39 in the usual physiotherapy group. The primary outcome included the number of braced patients, Cobb angle and the angle of trunk rotation. There were 6.1% braced patients in the SEAS exercises group vs 25.0% in the usual physiotherapy group. Failures of treatment in the worst-case analysis were 11.5% and 30.8%, respectively. In both cases the differences were statistically significant. Cobb angle improved in the SEAS exercises group, but worsened in the usual physiotherapy group. In the SEAS exercises group, 23.5% of patients improved and 11.8% worsened, while in the usual physiotherapy group 11.1% improved and 13.9% worsened. These data confirm the effectiveness of exercises in patients with scoliosis who are at high risk of progression. Compared with non-adapted exercises, a specific and personalized treatment (SEAS) appears to be more effective.

Do Knee Bracing and Delayed Weight Bearing Affect Mid-Term Functional Outcome after Anterior Cruciate Ligament Reconstruction?

Science.gov (United States)

Di Miceli, Riccardo; Marambio, Carlotta Bustos; Zati, Alessandro; Monesi, Roberta; Benedetti, Maria Grazia

2017-12-01

Purpose  The aim of this study was to assess the effect of knee bracing and timing of full weight bearing after anterior cruciate ligament reconstruction (ACLR) on functional outcomes at mid-term follow-up. Methods  We performed a retrospective study on 41 patients with ACLR. Patients were divided in two groups: ACLR group, who received isolated ACL reconstruction and ACLR-OI group who received ACL reconstruction and adjunctive surgery. Information about age at surgery, bracing, full or progressive weight bearing permission after surgery were collected for the two groups. Subjective IKDC score was obtained at follow-up. Statistical analysis was performed to compare the two groups for IKDC score. Subgroup analysis was performed to assess the effect of postoperative regimen (knee bracing and weight bearing) on functional outcomes. Results  The mean age of patients was 30.8 ± 10.6 years. Mean IKDC score was 87.4 ± 13.9. The mean follow-up was 3.5 ± 1.8 years. Twenty-two (53.7%) patients underwent ACLR only, while 19 (46.3%) also received other interventions, such as meniscal repair and/or collateral ligament suture. Analysis of overall data showed no differences between the groups for IKDC score. Patients in the ACLR group exhibited a significantly better IKDC score when no brace and full weight bearing after 4 weeks from surgery was prescribed in comparison with patients who worn a brace and had delayed full weight bearing. No differences were found with respect to the use of brace and postoperative weight bearing regimen in the ACLR-OI group. Conclusion  Brace and delayed weight bearing after ACLR have a negative influence on long-term functional outcomes. Further research is required to explore possible differences in the patients operated on ACLR and other intervention with respect to the use of a brace and the timing of full weight bearing to identify optimal recovery strategies. Level of Evidence  Level III, retrospective observational

Team care to cure adolescents with braces (avoiding low quality of life, pain and bad compliance): a case-control retrospective study. 2011 SOSORT Award winner.

Science.gov (United States)

Tavernaro, Marta; Pellegrini, Anna; Tessadri, Fabrizio; Zaina, Fabio; Zonta, Andrea; Negrini, Stefano

2012-09-20

Bracing could be efficacious, given good compliance and quality of braces. Recently the SOSORT Brace TREATMENT Management Guidelines (SBTMG) have highlighted the perceived importance of the professional teams surrounding braced patients. To verify the impact of a complete rehabilitation team in the adolescent patient with bracing. Design. Initial cross-sectional study, followed by a retrospective case-control study. Thirty-eight patients (15.8 ± 1.6 years; 26 females; 10 hyperkyphosis, 28 scoliosis of 29.2 ± 7.9° Cobb) extracted from a single orthotist database (between January 1, 2008 and September 1, 2009) and treated by the same physician; brace wearing at least 15 hours/day for a minimum of 6 months; age 10 or more. Braces: Sforzesco, Sibilla, Lapadula or Maguelone. Exercises: SEAS. Two questionnaires filled in blindly by patients: SRS-22 and one especially developed and validated with 25 questions on adherence to treatment. Groups (main risk factor): TEAM (private institute: satisfied 44/44 SOSORT criteria; grade of teamwork, "excellent") included 13 patients and NOT 25 (National Health Service Rehabilitation Department: 35/44 SOSORT criteria respected; grade, "insufficient"). TEAM was more compliant to bracing than NOT (97 ± 6% vs. 80 ± 24%) and performed nearly double the exercises (38 ± 12 vs. 20 ± 13 minutes/session). The self-reduction of bracing was significant in NOT (from 16.8 ± 3.7 to 14.8 ± 4.9 hours/day, , Pversus 7% of TEAM (P < 0.05). The populations did not differ at the baseline studied outcomes. The absence of a good team surrounding the patient increases by five times the risk of reduced compliance to bracing (odds ratio OR 5.5 - 95% confidence interval 95CI 3.6-7.4), along with more than 15 times that of QoL problems (OR 15.7 - 95CI 13.6-17.9) and pain (OR 16.8 - 95CI 14.5-19.1). Provided the limits of this first study on the topic, the SBTMG seems to be important for brace treatment

Quaternionic representation of the Coxeter group W(H{sub 4}) and the polyhedra

Energy Technology Data Exchange (ETDEWEB)

Koca, Mehmet [Department of Physics, College of Science, Sultan Qaboos University, PO Box 36, Al-Khod 123, Muscat (Oman); Al-Ajmi, Mudhahir [Department of Physics, College of Science, Sultan Qaboos University, PO Box 36, Al-Khod 123, Muscat (Oman); Koc, Ramazan [Department of Physics, Faculty of Engineering, University of Gaziantep, 27310 Gaziantep (Turkey)

2006-11-10

The vertices of the four-dimensional polytope {l_brace}3, 3, 5{r_brace} and its dual {l_brace}5, 3, 3{r_brace} admitting the symmetry of the non-crystallographic Coxeter group W(H{sub 4}) of order 14,400 are represented in terms of quaternions with unit norm where the polytope {l_brace}3, 3, 5{r_brace} is represented by the elements of the binaryicosahedral group of quaternions of order 120. We projected the polytopes to three-dimensional Euclidean space where the quaternionic vertices are the orbits of the Coxeter group W(H{sub 3}), icosahedral group with inversion, where W(H{sub 3}) x Z{sub 2} is one of the maximal subgroups of the Coxeter group W(H{sub 4}). The orbits of the icosahedral group W(H{sub 3}) in the polytope {l_brace}3, 3, 5{r_brace} are the conjugacy classes of the binary icosahedral group and represent a number of icosahedrons, dodecahedrons and one icosidodecahedron in three dimensions. The 15 orbits of the icosahedral group W(H{sub 3}) in the polytope {l_brace}5, 3, 3{r_brace} represent the dodecahedrons, icosidodecahedrons, small rhombicosidodecahedrons and some convex solids possessing the icosahedral symmetry. One of the convex solids with 60 vertices is very similar to the truncated icosahedron (soccer ball) but with two different edge lengths which can be taken as a realistic model of the C{sub 60} molecule at extreme temperature and pressure.

Providence nighttime bracing, in treatment of adolescent idiopathic scoliosis

DEFF Research Database (Denmark)

Simony, A.; Beuschau, Inge; Quisth, Lena

2015-01-01

Introduction: Since 2008 the non-surgical treatment of adolescent idiopathic scoliosis (AIS) in the southern part of Denmark, went from full-time bracing with Boston brace, to Providence night-time bracing. Methods: Since 2008, skeletally immature patients diagnosed with AIS and a primary curve w...

Eccentric bracing of steel frames in seismic design

International Nuclear Information System (INIS)

Popov, E.P.; Manheim, D.

1981-01-01

The general concepts of designing eccentrically braced steel frames are discussed. A number of possible bracing configurations are pointed out which are suitable for this type of framing. The necessity for considering the collapse mechanism for the selected frame is brought out, and the need for considering the ductility demands for the critical elements is indicated. The need for web stiffness along the critical beam elements (links), and the necessity for lateral bracing at the potential plastic hinges is emphasized. Properly designed eccentrically braced frames provide good drift control for moderate earthquakes, and good ductility for extreme earthquakes. Experience gained in practice attests to the practicality and economy of this kind of framing. The major disadvantage of properly designed eccentrically braced frames lies in the fact that high local distortions may occur during a severe earthquake requiring repair. However, such severe distortions should attenuate rapidly from the damaged areas. (orig./HP)

Radiosynthesis of 3-{l_brace}[4-(4-[{sup 18}F]fluorobenzyl)]piperazin-1-yl{r_brace}methyl-1H-pyrrolo[2,3-b]pyridine: A potential dopamine D{sub 4} receptor imaging agent

Energy Technology Data Exchange (ETDEWEB)

Haibin Tian; Duanzhi Yin; Junling Li; Lan Zhang; Cunfu Zhang; Yongxian Wang; Wei Zhou [Radiopharmaceutical Research Center, Shanghai Inst. of Nuclear Research, The Chinese Academy of Sciences, Shanghai, SH (China)

2003-07-01

The dopamine D{sub 4} receptor (D{sub 4}R) is expressed in low density in various extrastriatal brain regions. This receptor subtype is discussed in relation to the pathophysiology and treatment of schizophrenia but to date no selective positron emission tomography (PET) ligand is available to study its distribution in vivo. The 7-azaindole derivative 3-([4-(4-iodophenyl)piperazin-1-yl]-methyl)-1H-pyrrolo [2,3-b]pyridine (L-750,667) is a novel, high-affinity (K{sub i}=0.51nM) and selective D{sub 4}R ligand. L-750,667 analogue 3-[4-(4-[{sup 18}F]fluorobenzyl)]piperazin-1-yl methyl-1H-pyrrolo[2,3-b]-pyridine was prepared by reacting 3-(piperazin-1-yl)-methyl-1H-pyrrolo[2,3-b]pyridine with 4-[ 18F]fluorobenzaldehyde, which was labeled with no carrier added [ 18F]fluoride. The radiochemical yield of 3-[4-(4-[{sup 18}F]fluorobenzyl)]piperazin-1-yl methyl-1H-pyrrolo[2,3-b]pyridine was 12.0% at end of synthesis (EOS), and the synthesis time was 73min. The labeled benzaldehydes may be useful precursors for the radiosyntheses of other complex radiotracers for PET.

Crystal structure of the coordination polymer [FeIII2{PtII(CN4}3

Directory of Open Access Journals (Sweden)

Maksym Seredyuk

2015-01-01

Full Text Available The title complex, poly[dodeca-μ-cyanido-diiron(IIItriplatinum(II], [FeIII2{PtII(CN4}3], has a three-dimensional polymeric structure. It is built-up from square-planar [PtII(CN4]2− anions (point group symmetry 2/m bridging cationic [FeIIIPtII(CN4]+∞ layers extending in the bc plane. The FeII atoms of the layers are located on inversion centres and exhibit an octahedral coordination sphere defined by six N atoms of cyanide ligands, while the PtII atoms are located on twofold rotation axes and are surrounded by four C atoms of the cyanide ligands in a square-planar coordination. The geometrical preferences of the two cations for octahedral and square-planar coordination, respectively, lead to a corrugated organisation of the layers. The distance between neighbouring [FeIIIPtII(CN4]+∞ layers corresponds to the length a/2 = 8.0070 (3 Å, and the separation between two neighbouring PtII atoms of the bridging [PtII(CN4]2− groups corresponds to the length of the c axis [7.5720 (2 Å]. The structure is porous with accessible voids of 390 Å3 per unit cell.

Team care to cure adolescents with braces (avoiding low quality of life, pain and bad compliance: a case–control retrospective study. 2011 SOSORT Award winner

Directory of Open Access Journals (Sweden)

Tavernaro Marta

2012-09-01

Full Text Available Abstract Background Bracing could be efficacious, given good compliance and quality of braces. Recently the SOSORT Brace Treatment Management Guidelines (SBTMG have highlighted the perceived importance of the professional teams surrounding braced patients. Purpose To verify the impact of a complete rehabilitation team in the adolescent patient with bracing. Materials and methods Design. Initial cross-sectional study, followed by a retrospective case–control study. Population: Thirty-eight patients (15.8 ± 1.6 years; 26 females; 10 hyperkyphosis, 28 scoliosis of 29.2 ± 7.9° Cobb extracted from a single orthotist database (between January 1, 2008 and September 1, 2009 and treated by the same physician; brace wearing at least 15 hours/day for a minimum of 6 months; age 10 or more. Treatment: Braces: Sforzesco, Sibilla, Lapadula or Maguelone. Exercises: SEAS. Methods: Two questionnaires filled in blindly by patients: SRS-22 and one especially developed and validated with 25 questions on adherence to treatment. Groups (main risk factor: TEAM (private institute: satisfied 44/44 SOSORT criteria; grade of teamwork, “excellent” included 13 patients and NOT 25 (National Health Service Rehabilitation Department: 35/44 SOSORT criteria respected; grade, “insufficient”. Results TEAM was more compliant to bracing than NOT (97 ± 6% vs. 80 ± 24% and performed nearly double the exercises (38 ± 12 vs. 20 ± 13 minutes/session. The self-reduction of bracing was significant in NOT (from 16.8 ± 3.7 to 14.8 ± 4.9 hours/day, , P Conclusions Provided the limits of this first study on the topic, the SBTMG seems to be important for brace treatment, influencing pain, QoL and compliance (and so, presumably, final results. Future studies on the topic are advisable.

49 CFR 195.208 - Welding of supports and braces.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Welding of supports and braces. 195.208 Section 195.208 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS... HAZARDOUS LIQUIDS BY PIPELINE Construction § 195.208 Welding of supports and braces. Supports or braces may...

Carbon-11 pb-12: an attempt to visualize the dopamine d{sub 4} receptor in the primate brain with positron emission tomography

Energy Technology Data Exchange (ETDEWEB)

Langer, Oliver E-mail: oliver.langer@psyk.ks.se; Halldin, Christer; Chou Yuanhwa; Sandell, Johan; Swahn, Carl-Gunnar; Naagren, Kjell; Perrone, Roberto; Berardi, Francesco; Leopoldo, Marcello; Farde, Lars

2000-11-01

The dopamine D{sub 4} receptor (D{sub 4}R) is expressed in low density in various extrastriatal brain regions. This receptor subtype is discussed in relation to the pathophysiology and treatment of schizophrenia but no selective positron emission tomography (PET) ligand is available to date to study the distribution in vivo. The arylpiperazine derivative N-[2-[4-(4-chlorophenyl)piperazin-1-yl]ethyl]-3-methoxybenzamide (PB-12) is a novel, high-affinity ( K{sub i}=0.040 nM) and selective D{sub 4}R ligand. We radiolabeled PB-12 with carbon-11 (t{sub 1/2} 20.4 min) by O-methylation of the corresponding desmethyl analogue N-[2-[4-(4-chlorophenyl)piperazin-1-yl]ethyl]-3-hydroxybenzamide (LM-190) with [{sup 11}C]methyl triflate. Derivative LM-190 was prepared by condensing 3-hydroxybenzoic acid with the appropriate amine. For the radiolabeling, the incorporation yield was >90% and the total synthesis time including high performance liquid chromatography (HPLC) purification was about 35 min. The specific radioactivity of [{sup 11}C]PB-12 at time of injection was 67-118 GBq{center_dot}{mu}mol{sup -1}. PET studies in a cynomolgus monkey showed a high uptake and widespread distribution of radioactivity in the brain, including the neocortex and thalamus. About 40% of total radioactivity in plasma represented unchanged radioligand at 60 min after injection as determined by HPLC. Pretreatment with the D{sub 4}R ligand 3-{l_brace}[4-(4-chlorophenyl)piperazin-1-yl]methyl{r_brace}-1H-pyrollo[2,3-b]pyridine (L-745,870) prior to radioligand injection failed to demonstrate receptor-specific binding in the monkey brain. Furthermore, the brain radioactivity distribution was left unaffected by pretreating with unlabeled PB-12. This failure to detect a D{sub 4}R-specific signal may be related to a very low density of the D{sub 4}R in primate brain, insufficient binding affinity of the radioligand, and a high background of nonspecific binding. It can be concluded from these findings that

Three dimensional analysis of brace biomechanical efficacy for patients with AIS

DEFF Research Database (Denmark)

Lebel, David E; Al-Aubaidi, Zaid; Shin, Eyun-Jung

2013-01-01

Corrective three dimensional (3D) effect of different braces is debatable. We evaluated differences in in-brace radiographic correction comparing a custom thoracic-lumbo-sacral-orthosis (TLSO) (T) brace to a Chêneau type TLSO (C) brace using 3D EOS reconstruction technology. Our primary research ...

Body Image and Quality-of-Life in Untreated Versus Brace-Treated Females With Adolescent Idiopathic Scoliosis.

Science.gov (United States)

Schwieger, Traci; Campo, Shelly; Weinstein, Stuart L; Dolan, Lori A; Ashida, Sato; Steuber, Keli R

2016-02-01

The Bracing in Adolescent Idiopathic Scoliosis Trial (BrAIST) included skeletally immature high-risk patients with adolescent idiopathic scoliosis (AIS) with moderate curve sizes (20°- 40°). BrAIST was a multicenter, controlled trial using both randomized and preference treatment arms into either an observation group or a brace treatment group. The aim of this study was to analyze and compare body image and quality-of-life (QOL) in female AIS patients who were observed or treated with a brace. Brace treatment is an effective means for controlling progressive scoliosis and preventing the need for surgery, but there is no consensus regarding the effect of brace treatment on body image or on QOL in adolescents with AIS. Data from female BrAIST patients in the randomized (n = 132) or preference (n = 187) arms and were observed (n = 120) or brace treated (n = 199) were analyzed. Patients completed the Spinal Appearance Questionnaire (SAQ) and the Pediatric Quality of Life Inventory (PedsQOL) 4.0 Generic Scales at baseline and 6 month follow-up visits up to 2 years. Items on the SAQ measured three body image constructs (self, ideal, and overall). The PedsQOL measured health, activities, feelings, social factors, and school. . In general, there were no significant differences within or between study arms or treatments regarding body image or QOL through 2 years of follow-up. Poorer body image was significantly correlated with poorer QOL during the first 2 years of follow-up regardless of study arm or treatment. Patients who crossed-over to a different treatment and patients with largest Cobb angles ≥ 40 degrees had significantly poorer body image, in particular self-body image, compared with those that did not. This study does not support findings from previous research indicating that wearing a brace has a negative impact on or is negatively impacted by body image or QOL. 2.

Effect of Prophylactic Ankle-Brace Use During a High School Competitive Basketball Season on Dynamic Postural Control.

Science.gov (United States)

Crockett, Nathan J; Sandrey, Michelle A

2015-08-01

Few studies have evaluated the long-term effects of prophylactic ankle-brace use during a sport season. To determine the effects of prophylactic ankle-brace use during a high school basketball season on dynamic postural control and functional tests. Prospective repeated-measures design. High school athletic facility. 21 healthy high school basketball athletes (13 girls, 8 boys). The order of testing was randomized using the Star Excursion Balance Test (SEBT) for posteromedial (PM), medial (M), and anteromedial (AM) directions and 3 functional tests (FT) consisting of the single-leg crossover hop, single-leg vertical jump, and the single-leg 6-m hop for time at pre-, mid-, and postseason. After pretesting, the ankle brace was worn on both limbs during the entire 16-wk competitive basketball season. SEBT for PM, M, and AM and 3 single-leg FTs. Dynamic postural control using the SEBT and the 3 FTs improved over time, notably from pretest to posttest. The left limb was different from the right limb during the single-leg vertical jump. Effect sizes were large for pretest to posttest for the 3 SEBT directions and 2 of the 3 FTs. The 16-wk basketball prophylactic ankle-brace intervention significantly improved dynamic postural control and single-limb FTs over time.

Treatment of adolescent lumber spondylolysis with modified Boston brace. Selection of the patients with bone scintigraphy and repair of the part defects

International Nuclear Information System (INIS)

Hino, Hiroyuki; Abumi, Kuniyoshi; Kaneda, Kiyoshi; Sato, Eishu

1996-01-01

Results of brace treatment of 29 spondylolysis patients were reported. Patients were those who were diagnosed by scout roentgenography and accumulated 99m Tc at spondylolytic site by bone scintigraphy or by single photon emission computed tomography (SPECT) which being found more convenient to see the accumulation than the scintigraphy. Coaptation after brace treatment was observed by flat and tomographic roentgenography. Under limited sports activity, the hard brace was used for about 4 months and then soft one, for 2 months. Coaptation and repair were observed for 46 (79%) of 58 part defects in the 29 patients. Since lumber spine spondylolysis is mostly caused by fatigue fracture and bone metabolism is activated at the lesional site, 99m Tc accumulation can be seen at the spondylolytic site by bone scintigraphy with high frequency. Therefore, the rate of repair can be increased when brace treatment was applied for patients with positive bone scintigraphy findings. The scintigraphy was thus useful far selecting patients suitable for brace treatment. (K.H.)

The Effectiveness of a Functional Knee Brace on Joint-Position Sense in Anterior Cruciate Ligament-Reconstructed Individuals.

Science.gov (United States)

Sugimoto, Dai; LeBlanc, Jessica C; Wooley, Sarah E; Micheli, Lyle J; Kramer, Dennis E

2016-05-01

It is estimated that approximately 350,000 individuals undergo anterior cruciate ligament (ACL) reconstruction surgery in each year in the US. Although ACL-reconstruction surgery and postoperative rehabilitation are successfully completed, deficits in postural control remain prevalent in ACL-reconstructed individuals. In order to assist the lack of balance ability and reduce the risk of retear of the reconstructed ACL, physicians often provide a functional knee brace on the patients' return to physical activity. However, it is not known whether use of the functional knee brace enhances knee-joint position sense in individuals with ACL reconstruction. Thus, the effect of a functional knee brace on knee-joint position sense in an ACL-reconstructed population needs be critically appraised. After systematically review of previously published literature, 3 studies that investigated the effect of a functional knee brace in ACL-reconstructed individuals using joint-position-sense measures were found. They were rated as level 2b evidence in the Centre of Evidence Based Medicine Level of Evidence chart. Synthesis of the reviewed studies indicated inconsistent evidence of a functional knee brace on joint-position improvement after ACL reconstruction. More research is needed to provide sufficient evidence on the effect of a functional knee brace on joint-position sense after ACL reconstruction. Future studies need to measure joint-position sense in closed-kinetic-chain fashion since ACL injury usually occurs under weight-bearing conditions.

Thermodynamics of the amalgam cells {l_brace}Cs-amalgam|CsX (m)|AgX|Ag{r_brace} (X=Cl, Br, I) and primary medium effects in (methanol+water) (acetonitrile+water), and (1,4-dioxane+water) solvent mixtures

Energy Technology Data Exchange (ETDEWEB)

Falciola, Luigi [Department of Physical Chemistry and Electrochemistry, University of Milan, Via Golgi 19, I-20133 Milan (Italy)]. E-mail: luigi.falciola@unimi.it; Longoni, Giorgio [Department of Physical Chemistry and Electrochemistry, University of Milan, Via Golgi 19, I-20133 Milan (Italy); Mussini, Patrizia R. [Department of Physical Chemistry and Electrochemistry, University of Milan, Via Golgi 19, I-20133 Milan (Italy)]. E-mail: patrizia.mussini@unimi.it; Mussini, Torquato [Department of Physical Chemistry and Electrochemistry, University of Milan, Via Golgi 19, I-20133 Milan (Italy)]. E-mail: torquato.mussini@unimi.it

2006-06-15

The potential difference E of the amalgam cell {l_brace}Cs{sub x}Hg{sub 1-x}|CsX (m)|AgX|Ag{r_brace} (X=Cl, Br, I) has been measured as a function of the mole fraction x{sub Cs} of Cs metal in amalgams and of the molality m of CsX in (methanol+water) (acetonitrile+water), and (1,4-dioxane+water) solvent mixtures containing up to 0.75 mass fraction of the organic component, at the temperature 298.15K. The respective standard molal potential differences E{sub m}{sup o} have been determined together with the relevant activity coefficients {gamma}{sub +}/- as functions of the CsX molality. The found E{sub m}{sup o} values show a parabolic decrease with increasing proportion of the organic component in the solvent mixture. Analysis of the relevant primary medium effects upon CsX shows that the CsX transfer from the standard state in water to the standard state in the (aqueous+organic) mixture is always unfavoured, and the acetonitrile is the least unfavoured co-solvent studied. Analysis of the primary medium effect upon CsI in terms of Feakins and French's theory leads to a primary hydration number close to zero, which is consistent with the results of supplementary EXAFS experiments on Cs{sup +} and I{sup -} in (acetonitrile+water) solvent mixtures.

Tellurium sulfates from reactions in oleum and sulfur trioxide: syntheses and crystal structures of TeO(SO_4), Te_4O_3(SO_4)_5, and Te(S_2O_7)_2

International Nuclear Information System (INIS)

Logemann, Christian; Bruns, Joern; Schindler, Lisa Verena; Zimmermann, Vanessa; Wickleder, Mathias S.

2015-01-01

The reaction of K_2TeO_4 with fuming sulfuric acid (65 % SO_3) in sealed glass ampoules at 250 C led to colorless single crystals of TeO(SO_4) [triclinic, P anti 1, Z = 8, a = 819.89(3) pm, b = 836.95(4) pm, c = 1179.12(5) pm, α = 82.820(2) , β = 70.645(2) , γ = 81.897(2) , V = 753.11(6) x 10"6 pm"3]. A horseshoe type [Te_4O_3] fragment is the basic motif in the layer structure of the compound. The [Te_4O_3] moieties are linked to infinite chains by further oxide ions. Monomeric [Te_4O_3] horseshoes are found in the crystal structure of Te_4O_3(SO_4)_5 [trigonal, P3_221, Z = 3, a = 859.05(2) pm, c = 2230.66(7) pm, V = 1425.61(6) x 10"6 pm"3], which was obtained from TeO_2 and fuming sulfuric acid (65 % SO_3) at 200 C as colorless single crystals. By switching to neat SO_3 as reaction medium colorless crystals of Te(S_2O_7)_2 [P2_1/n, Z = 4, a = 1065.25(3) pm, b = 818.50(2) pm, c = 1206.27(3) pm, β = 102.097(1) , V = 1028.40(5) x 10"6 pm"3] form when ortho-telluric acid, H_6TeO_6, is used as the tellurium source. The compound was reported previously, however, obviously with a wrong crystallographic description. In the crystal structure the tellurium atoms are coordinated by two chelating disulfate ions. Further Te-O contacts link the [Te(S_2O_7)_2] units to an extended network. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Development and preliminary validation of Brace Questionnaire (BrQ: a new instrument for measuring quality of life of brace treated scoliotics

Directory of Open Access Journals (Sweden)

Gkoltsiou Konstantina

2006-05-01

Full Text Available Abstract Background The quality of life among children with idiopathic scoliosis during their adolescence has been reported to be affected by the brace itself. However, a controversy exists whether brace treated scoliotics experience a poor quality of life, thus there is a need for the development of a brace-oriented instrument, as the now-existing questionnaires that are commonly used, such as the SRS -22, take into consideration the effects of both the conservative and the surgical treatment on quality of life of scoliotic children. The aim of the present study is to assess the validity and reliability of Brace Questionnaire (BrQ, a new instrument for measuring quality of life of scoliotic adolescents who are treated conservatively with a brace. Material-method Methodology of development involved literature review, patient and health care professionals' in-depth interviews and content validity analysis on patients. A validation study was performed on 28 brace treated scoliotic children aged between 9 and 18 years old. BrQ was assessed for the following psychometric properties: item convergent validity, floor and ceiling effects, internal consistency reliability, clinical validity and responsiveness to change. Results BrQ is self administrated and developmentally appropriate for ages 9 to 18 years old and is consisted of 34 Likert-scale items associated with eight domains: general health perception, physical functioning, emotional functioning, self esteem and aesthetics, vitality, school activity, bodily pain and social functioning of scoliotic children treated conservatively with a brace. The subscales of these eight dimensions can be combined to produce a total score. Higher scores mean a better quality of life. An item convergent validity ≥ 0.40 was satisfied by all items in the present study. A satisfactory internal consistency reliability for the BrQ was recorded (Cronbach's alpha coefficient was 0.82. There were no floor or ceiling

Comfort and acceptability of various immobilization positions using a shoulder external rotation and abduction brace.

Science.gov (United States)

Hatta, Taku; Yamamoto, Nobuyuki; Sano, Hirotaka; Itoi, Eiji

2017-03-01

Immobilization with shoulder braces is used for conservative treatment of an initial shoulder dislocation. Various arm positions have been investigated to determine optimal position in terms of the anatomical reduction of the Bankart lesion. Recently, the effect of immobilization in shoulder abduction as well as in external rotation has been reported. However, there are few studies assessing subjects' acceptability of the brace in various arm positions. We hypothesized that a certain arm position regarding abduction or external rotation for immobilization would induce significant discomfort during activities of daily living. A dominant arm of 20 healthy participants was immobilized with a shoulder brace in 4 different positions; adduction and internal rotation (Add-IR), adduction and external rotation (Add-ER), 30° of abduction and 30° of external rotation (Abd-30ER), and 30° of abduction and 60° of external rotation (Abd-60ER). After completing immobilization for 24 h, subjects were asked to assess the discomfort of bracing for overall and individual activities, using a visual analogue scale. Data were compared among the four positions. For overall activities and several activities (eating, reading books, and removing and putting on pants), Abd-60ER was significantly more uncomfortable than adducted arm positions. Abd-30ER did not show any differences compared to the other arm positions. Immobilization in abduction and external rotation seems to be acceptable although the arm position in 30° of abduction and 60° of external rotation is less comfortable than the others. Our results might be useful in determining and developing the ideal shoulder brace which could keep patients' compliance and improve their outcomes. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.

Polish adaptation of Bad Sobernheim Stress Questionnaire-Brace and Bad Sobernheim Stress Questionnaire-Deformity.

Science.gov (United States)

Misterska, Ewa; Głowacki, Maciej; Harasymczuk, Jerzy

2009-12-01

Bad Sobernheim Stress Questionnaire-Brace and Bad Sobernheim Stress Questionnaire-Deformity are relatively new tools aimed at facilitating the evaluation of long-term results of therapy in persons with idiopathic scoliosis undergoing conservative treatment. To use these tools properly in Poland, they must be translated into Polish and adapted to the Polish cultural settings. The process of cultural adaptation of the questionnaires was compliant with the guidelines of International Quality of Life Assessment (IQOLA) Project. In the first stage, two independent translators converted the originals into Polish. Stage two, consisted of a comparison of the originals and two translated versions. During that stage, the team of two translators and authors of the project identified differences in those translations and created a combination of the two. In the third stage, two independent translators, who were native speakers of German, translated the adjusted version of the Polish translation into the language of the original document. At the last stage, a commission composed of: specialists in orthopedics, translators, a statistician and a psychologist reviewed all translations and drafted a pre-final version of the questionnaires. Thirty-five adolescent girls with idiopathic scoliosis who were treated with Cheneau brace were subjected to the questionnaire assessment. All patients were treated in an out-patient setting by a specialist in orthopedics at the Chair and Clinic of Orthopedics and Traumatology. Median age of patients was 14.8 SD 1.5, median value of the Cobb's angle was 27.8 degrees SD 7.4. 48.6% of patients had thoracic scoliosis, 31.4% had thoracolumbar scoliosis, and 20% patients had lumbar scoliosis. Median results obtained by means of the Polish version of BSSQ-Brace and BSSQ-Deformity questionnaires were 17.9 SD 5.0 and 11.3 SD 4.7, respectively. Internal consistency of BSSQ-Brace and BSSQ-Deformity was at the level of 0.80 and 0.87, whereas the value of

Strength and Functional Improvement Using Pneumatic Brace with Extension Assist for End-Stage Knee Osteoarthritis: A Prospective, Randomized trial.

Science.gov (United States)

Cherian, Jeffrey J; Bhave, Anil; Kapadia, Bhaveen H; Starr, Roland; McElroy, Mark J; Mont, Michael A

2015-05-01

Pneumatic unloader bracing with extension assists have been proposed as a non-operative modality that may delay the need for knee surgery by reducing pain and improving function. This prospective, randomized trial evaluated 52 patients who had knee osteoarthritis for changes in: (1) muscle strength; (2) objective functional improvements; (3); subjective functional improvements; (4) pain; (5) quality of life; and (6) conversion to total knee arthroplasty (TKA) compared to standard of care. Patient outcomes were evaluated at a minimum 3 months. Braced patient's demonstrated significant improvements in muscle strength, several functional tests, and patient reported outcomes when compared to the matched cohort. These results are encouraging and suggest that this device may represent a promising alternative to standard treatment methods for knee osteoarthritis. Copyright © 2014 Elsevier Inc. All rights reserved.

Effects of prophylactic knee bracing on knee joint kinetics and kinematics during netball specific movements.

Science.gov (United States)

Sinclair, Jonathan K; Vincent, Hayley; Richards, Jim D

2017-01-01

To investigate the effects of a prophylactic knee brace on knee joint kinetics and kinematics during netball specific movements. Repeated measures. Laboratory. Twenty university first team level female netball players. Participants performed three movements, run, cut and vertical jump under two conditions (brace and no-brace). 3-D knee joint kinetics and kinematics were measured using an eight-camera motion analysis system. Knee joint kinetics and kinematics were examined using 2 × 3 repeated measures ANOVA whilst the subjective ratings of comfort and stability were investigated using chi-squared tests. The results showed no differences (p > 0.05) in knee joint kinetics. However the internal/external rotation range of motion was significantly (p < 0.05) reduced when wearing the brace in all movements. The subjective ratings of stability revealed that netballers felt that the knee brace improved knee stability in all movements. Further study is required to determine whether reductions in transverse plane knee range of motion serve to attenuate the risk from injury in netballers. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effect of different skin-ankle brace application pressures on quiet single-limb balance and electromyographic activation onset of lower limb muscles

Directory of Open Access Journals (Sweden)

Papadakis Stamatios A

2007-09-01

Full Text Available Abstract Background Several studies have been carried out in order to investigate the effect of ankle bracing on ankle joint function and performance. However, no study so far has examined the role of skin-brace interface pressure in neuromuscular control. The aim of this study was to investigate the effect of different skin-ankle brace interface pressures on quiet single limb balance and the electromyographic (EMG activation sequence of four lower limb muscles. Methods Thirty three male physical education students who volunteered to take part in the study were measured under three ankle brace conditions: i without brace, ii with brace and 30 kPa application pressure and iii with brace and 60 kPa application pressure. Single limb balance (anteroposterior and mediolateral parameter was assessed on the dominant lower limb, with open and closed eyes, on a force platform, simultaneously with the EMG recording of four lower lower limb muscles' (gastrocnemius, peroneus longus, rectus femoris and biceps femoris activation onset. Results The results showed that overall balance (total stability parameter was not significantly affected in any of the three ankle brace conditions. However, the anteroposterior centre of pressure excursion and centre of pressure excursion velocity were significantly increased with the application of ankle brace, both with 30 and 60 kPa application pressures. Furthermore, it was found that single limb balance was significantly worse with closed eyes compared to open eyes. EMG measurements showed that the sequence of lower limb activation onset was not affected in any of the three ankle brace application conditions. The results of this study showed that the application of an ankle brace with two different skin-brace interface pressures had no effect on overall single limb balance and the sequence of lower limb muscle activation. Conclusion These findings suggest that peripheral joint receptors are either not adequately

Scoliosis brace design: influence of visual aesthetics on user acceptance and compliance.

Science.gov (United States)

Law, Derry; Cheung, Mei-Chun; Yip, Joanne; Yick, Kit-Lun; Wong, Christina

2017-06-01

Adolescent idiopathic scoliosis is a common condition found in adolescents. A rigid brace is often prescribed as the treatment for this spinal deformity, which negatively affects user compliance due to the discomfort caused by the brace, and the psychological distress resulting from its appearance. However, the latter, which is the impact of visual aesthetics, has not been thoroughly studied for scoliosis braces. Therefore, a qualitative study with in-depth interviews has been carried out with 10 participants who have a Cobb angle of 20°-30° to determine the impact of visual aesthetics on user acceptance and compliance towards the brace. It is found that co-designing with patients on the aesthetic aspects of the surface design of the brace increases the level of user compliance and induces positive user perception. Therefore, aesthetic preferences need to be taken into consideration in the design process of braces. Practitioner Summary: The impact of visual aesthetics on user acceptance and compliance towards a rigid brace for scoliosis is investigated. The findings indicate that an aesthetically pleasing brace and the involvement of patients in the design process of the brace are important for increasing user compliance and addressing psychological issues during treatment.

Cyclic Testing of Steel Chevron Braces with Vertically Slotted Beam Connection

Directory of Open Access Journals (Sweden)

Rozlyn K. Bubela

2010-07-01

Full Text Available Experimental tests were performed to study the seismic behavior and performance of modified steel chevron braced frame systems, which incorporate a vertical slotted connection (VSC detail between the top of the braces and the floor beam above. The VSC detail is intended to prevent vertical load transfer to the beam and limit brace forces to the compressive resistance of the members. Full-scale quasi-static cyclic tests were performed on two specimens with hollow tube braces, with one specimen having the braces filled with concrete. Both frames exhibited stable, predictable behavior under cyclic loading. The VSC detail provided free vertical movement of the brace assembly during both tests. However, its flexibility created a moderate reduction in the overall lateral stiffness of the frame. The concrete-filled tube specimen sustained higher peak loads, demonstrated greater residual strength and dissipated more energy than the hollow tube specimen due to the partial inhibition of local buckling by the concrete core. It was found that the VSC chevron braced frame system is a suitable concept for use in buildings in high-risk seismic zones.

Prospective study of 158 adult scoliosis treated by a bivalve polyethylene overlapping brace and reviewed at least 5 years after brace fitting

Directory of Open Access Journals (Sweden)

Jean Claude de Mauroy

2016-10-01

Full Text Available Abstract Background The conservative orthopaedic treatment of adult scoliosis is very disappointing. In a series of 144 patients; only 25 % (33 cases were monitored at 2 years of treatment. (Papadopoulos 2013. Thereby the literature typically focuses on a small number of patients, which limits the usefulness and relevance of its results. The brace effect on pain has been systematically described, but there is no publication on the effect of treatment on the Cobb angle and main clinical parameters. Methods From a prospective database started in 1998, we selected all 158 consecutive patients effectively treated conservatively with the Lyon management treatment and controlled five years after brace fitting. Lyon management includes a lordosing bivalve polyethylene overlapping brace in association with specific physiotherapy. The brace can either be short with anterior support under the chest or long with sterno-clavicular support when there is a high thoracic kyphosis. Results 1. For the rate of scoliosis controlled after 5 years, the follow-up was 24 % of the 661 patients accepting the treatment. Pain is almost the main reason for the medical consultation, generally correlating with an increase of the scoliotic angulation. 2. The descriptive data can be superimposed on general group with age (m=56 years, SD=13 but initial Cobb angulation is significantly higher (m=40°, SD=17. Ratio Female/Male=0.91. Generally, the scoliosis is stabilized at (m=39.74 °, SD=19.40, 8 years after the beginning of the treatment. 38 improvements of more than 5°= 24 %; 88 stable = 56 %; 32 worsening of more than 5° = 20 % The rib hump is improved of by 3 mm, (modelling effect of the brace. The occipital axis is improved by more than 6 mm. But the T1 plumb line distance is worsening by 7 mm (most braces are short without sterno-clavicular support. Conclusions For the first time, the number of records and follow up after 8 years allows to study the

Treatment of adolescent lumber spondylolysis with modified Boston brace. Selection of the patients with bone scintigraphy and repair of the part defects

Energy Technology Data Exchange (ETDEWEB)

Hino, Hiroyuki; Abumi, Kuniyoshi; Kaneda, Kiyoshi; Sato, Eishu [Hokkaido Univ., Sapporo (Japan). School of Medicine

1996-06-01

Results of brace treatment of 29 spondylolysis patients were reported. Patients were those who were diagnosed by scout roentgenography and accumulated {sup 99m}Tc at spondylolytic site by bone scintigraphy or by single photon emission computed tomography (SPECT) which being found more convenient to see the accumulation than the scintigraphy. Coaptation after brace treatment was observed by flat and tomographic roentgenography. Under limited sports activity, the hard brace was used for about 4 months and then soft one, for 2 months. Coaptation and repair were observed for 46 (79%) of 58 part defects in the 29 patients. Since lumber spine spondylolysis is mostly caused by fatigue fracture and bone metabolism is activated at the lesional site, {sup 99m}Tc accumulation can be seen at the spondylolytic site by bone scintigraphy with high frequency. Therefore, the rate of repair can be increased when brace treatment was applied for patients with positive bone scintigraphy findings. The scintigraphy was thus useful far selecting patients suitable for brace treatment. (K.H.)

On the origin of higher braces and higher-order derivations

Czech Academy of Sciences Publication Activity Database

Markl, Martin

2015-01-01

Roč. 10, č. 3 (2015), s. 637-667 ISSN 2193-8407 Institutional support: RVO:67985840 Keywords : Koszul braces * Börjeseon braces * higher-order derivation Subject RIV: BA - General Mathematics Impact factor: 0.600, year: 2015 http://link.springer.com/article/10.1007/s40062-014-0079-2

Thermophysical properties of the ionic liquids [EMIM][B(CN)4] and [HMIM][B(CN)4].

Science.gov (United States)

Koller, Thomas M; Rausch, Michael H; Ramos, Javier; Schulz, Peter S; Wasserscheid, Peter; Economou, Ioannis G; Fröba, Andreas P

2013-07-18

In the present study, the thermophysical properties of the tetracyanoborate-based ionic liquids (ILs) 1-ethyl-3-methylimidazolium tetracyanoborate ([EMIM][B(CN)4]) and 1-hexyl-3-methylimidazolium tetracyanoborate ([HMIM][B(CN)4]) obtained by both experimental methods and molecular dynamics (MD) simulations are presented. Conventional experimental techniques were applied for the determination of refractive index, density, interfacial tension, and self-diffusion coefficients for [HMIM][B(CN)4] at atmospheric pressure in the temperature range from 283.15 to 363.15 K. In addition, surface light scattering (SLS) experiments provided accurate viscosity and interfacial tension data. As no complete molecular parametrization was available for the MD simulations of [HMIM][B(CN)4], our recently developed united-atom force field for [EMIM][B(CN)4] was partially transferred to the homologous IL [HMIM][B(CN)4]. Deviations between our simulated and experimental data for the equilibrium properties are less than ±0.3% in the case of density and less than ±8% in the case of interfacial tension for both ILs. Furthermore, the calculated and measured data for the transport properties viscosity and self-diffusion coefficient are in good agreement, with deviations of less than ±30% over the whole temperature range. In addition to a comparison with the literature, the influence of varying cation chain length on thermophysical properties of [EMIM][B(CN)4] and [HMIM][B(CN)4] is discussed.

Workflow of CAD / CAM Scoliosis Brace Adjustment in Preparation Using 3D Printing.

Science.gov (United States)

Weiss, Hans-Rudolf; Tournavitis, Nicos; Nan, Xiaofeng; Borysov, Maksym; Paul, Lothar

2017-01-01

High correction bracing is the most effective conservative treatment for patients with scoliosis during growth. Still today braces for the treatment of scoliosis are made by casting patients while computer aided design (CAD) and computer aided manufacturing (CAM) is available with all possibilities to standardize pattern specific brace treatment and improve wearing comfort. CAD / CAM brace production mainly relies on carving a polyurethane foam model which is the basis for vacuuming a polyethylene (PE) or polypropylene (PP) brace. Purpose of this short communication is to describe the workflow currently used and to outline future requirements with respect to 3D printing technology. Description of the steps of virtual brace adjustment as available today are content of this paper as well as an outline of the great potential there is for the future 3D printing technology. For 3D printing of scoliosis braces it is necessary to establish easy to use software plug-ins in order to allow adding 3D printing technology to the current workflow of virtual CAD / CAM brace adjustment. Textures and structures can be added to the brace models at certain well defined locations offering the potential of more wearing comfort without losing in-brace correction. Advances have to be made in the field of CAD / CAM software tools with respect to design and generation of individually structured brace models based on currently well established and standardized scoliosis brace libraries.

Combined versus individual effects of a valgus knee brace and lateral wedge foot orthotic during stair use in patients with knee osteoarthritis.

Science.gov (United States)

Moyer, Rebecca; Birmingham, Trevor; Dombroski, Colin; Walsh, Robert; Giffin, J Robert

2017-05-01

The aim of this study was to investigate the combined and individual biomechanical effects of a valgus knee brace and a lateral wedge foot orthotic during stair ascent and descent in patients with knee osteoarthritis (OA). Thirty-five patients with varus alignment and medial knee OA were prescribed a custom valgus knee brace and lateral wedge foot orthotic. Knee angles and moments in the frontal and sagittal planes were determined from 3D gait analysis completed under four randomized conditions: (1) control (no knee brace or foot orthotic), (2) knee brace, (3) foot orthotic, and (4) combined knee brace and foot orthotic. Additional measures included the vertical ground reaction force, trunk lean, toe out and gait speed. During the combined use of a knee brace and foot orthotic, significant decreases in the knee adduction angle (2.17, 95%CI: 0.50-3.84, p=0.013) and 2nd peak EKAM (0.35, 95%CI: 0.17-0.52, pstair descent; and significant increases in the EKFM were observed during stair ascent (0.54, 95%CI: 0.30-0.78, pstair descent compared to ascent, except for toe out. Findings suggest greater effects on gait when both knee brace and foot orthotic are used together, resulting in a more normal gait pattern. However, whether or not a true change in knee joint load can be inferred when using these orthoses remains unclear. Further research is required to determine the clinical importance of the observed changes. Copyright © 2017. Published by Elsevier B.V.

Thermoelectric properties of Co4Sb12 with Bi2Te3 nanoinclusions.

Science.gov (United States)

Ghosh, Sanyukta; Bisht, Anuj; Karati, Anirudha; Rogl, Gerda; Rogl, Peter; Murty, B S; Suwas, Satyam; Mallik, Ramesh Chandra

2018-02-12

The figure of merit (zT) of a thermoelectric material can be enhanced by incorporation of nanoinclusions into bulk material. The presence of bismuth telluride (Bi 2 Te 3 ) nanoinclusions in Co 4 Sb 12 leads to lower phonon thermal conductivity by introducing interfaces and defects; it enhances the average zT between 300-700 K. In the current study, Bi 2 Te 3 nanoparticles were dispersed into bulk Co 4 Sb 12 by ball-milling. The bulk was fabricated by spark plasma sintering. The presence of Bi 2 Te 3 dispersion in Co 4 Sb 12 was confirmed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy and electron back scattered diffraction technique. Energy dispersive spectroscopy showed antimony (Sb) as an impurity phase for higher contents of Bi 2 Te 3 in the sample. The Seebeck coefficient (S) and electrical conductivity (σ) were measured in the temperature range of 350-673 K. The negative value of S indicates that most of the charge carriers were electrons. A decrease in S and increase in σ with Bi 2 Te 3 content are due to the increased carrier concentration, as confirmed by Hall measurement. The thermal conductivity, measured between 423-673 K, decreased due to the increased phonon scattering at interfaces. A maximum zT of 0.17 was achieved at 523 K and it did not vary much throughout the temperature range. The experimental results of composites were compared by using effective medium theories.

Thermoelectric properties of Co4Sb12 with Bi2Te3 nanoinclusions.

Science.gov (United States)

Ghosh, Sanyukta; Bisht, Anuj; Karati, Anirudha; Rogl, Gerda; Rogl, Peter F; Murty, B S; Suwas, Satyam; Mallik, Ramesh Chandra

2018-01-08

The figure of merit (zT) of a thermoelectric material can be enhanced by incorporation of nanoinclusions into bulk material. The presence of bismuth telluride (Bi2Te3) nanoinclusions in Co4Sb12 leads to lower phonon thermal conductivity by introducing interfaces and defects; it enhances the average zT between 300-700 K. In the current study, Bi2Te3 nanoparticles were dispersed into bulk Co4Sb12 by ball-milling. The bulk was fabricated by spark plasma sintering (SPS). The presence of Bi2Te3 dispersion in Co4Sb12 was confirmed by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron back scattered diffraction (EBSD) technique. Energy dispersive spectroscopy (EDS) showed antimony (Sb) as an impurity phase for higher contents of Bi2Te3 in the sample. The Seebeck coefficient (S) and electrical conductivity () were measured in the temperature range of 350 - 673 K. The negative value of S indicates that most of the charge carriers were electrons. A decrease in S and increase in with Bi2Te3 content are due to the increased carrier concentration, as confirmed by Hall measurement. The thermal conductivity, measured between 423 - 673 K, decreased due to the increased phonon scattering at interfaces. A maximum zT of 0.17 was achieved at 523 K and it did not vary much throughout the temperature range. The experimental results of composites were compared by using effective medium theories. © 2018 IOP Publishing Ltd.

A new dual bracing system for improving the seismic behavior of steel structures

International Nuclear Information System (INIS)

Kari, A; Ghassemieh, M; Abolmaali, S A

2011-01-01

Shape memory alloy braces and buckling restrained braces have been shown to exhibit favorable energy dissipating characteristics in steel structures. However, buckling restrained braces are unable to recover their original shape after unloading and consequently experience large residual inter-story drifts after the earthquake, which leads to large permanent deformations in the structure. On the other hand, shape memory braces possess the recentering feature which enables them to recover their original shape. Nevertheless, compared to buckling restrained braced frames, the shape memory bracing frame usually experiences larger maximum inter-story drifts during the earthquake. This paper presents the results of a numerical study conducted to investigate the benefit of using the combination of buckling restrained braces and shape memory braces (dual bracing) in one structure, for the new design as well as retrofitting purposes. The superelastic model of shape memory alloy and plasticity model of steel are incorporated into the nonlinear finite element program particularly developed for this research. Results revealed that, with the proper configuration, both aims, namely minimizing both residual and maximum inter-story drifts, can be attained

Informed consent for braces.

Science.gov (United States)

Jharwal, Vikas; Trehan, Mridula; Rathore, Nidhi; Rathee, Pooja; Agarwal, Deepesh; Mathur, Nikunj

2014-05-01

The influence of law on the orthodontic profession has greatly increased in the last few decades. Dental law has emerged today as a full-fedged specialty dealing with a variety of areas, like professional negligence, doctor-patient contracts, consumer protection laws, ethics, general and special health legislations and practice regulatory mechanisms. This article highlights the concept of informed consent which is based on the premise that each individual has a right to make decisions concerning his health, disease and treatment. How to cite this article: Jharwal V, Trehan M, Rathore N, Rathee P, Agarwal D, Mathur N. Informed Consent for Braces. Int J Clin Pediatr Dent 2014;7(2):105-108.

Evaluation of Brace Treatment for Infant Hip Dislocation in a Prospective Cohort: Defining the Success Rate and Variables Associated with Failure.

Science.gov (United States)

Upasani, Vidyadhar V; Bomar, James D; Matheney, Travis H; Sankar, Wudbhav N; Mulpuri, Kishore; Price, Charles T; Moseley, Colin F; Kelley, Simon P; Narayanan, Unni; Clarke, Nicholas M P; Wedge, John H; Castañeda, Pablo; Kasser, James R; Foster, Bruce K; Herrera-Soto, Jose A; Cundy, Peter J; Williams, Nicole; Mubarak, Scott J

2016-07-20

The use of a brace has been shown to be an effective treatment for hip dislocation in infants; however, previous studies of such treatment have been single-center or retrospective. The purpose of the current study was to evaluate the success rate for brace use in the treatment of infant hip dislocation in an international, multicenter, prospective cohort, and to identify the variables associated with brace failure. All dislocations were verified with use of ultrasound or radiography prior to the initiation of treatment, and patients were followed prospectively for a minimum of 18 months. Successful treatment was defined as the use of a brace that resulted in a clinically and radiographically reduced hip, without surgical intervention. The Mann-Whitney test, chi-square analysis, and Fisher exact test were used to identify risk factors for brace failure. A multivariate logistic regression model was used to determine the probability of brace failure according to the risk factors identified. Brace treatment was successful in 162 (79%) of the 204 dislocated hips in this series. Six variables were found to be significant risk factors for failure: developing femoral nerve palsy during brace treatment (p = 0.001), treatment with a static brace (p failure, whereas hips with 4 or 5 risk factors had a 100% probability of failure. These data provide valuable information for patient families and their providers regarding the important variables that influence successful brace treatment for dislocated hips in infants. Prognostic Level I. See Instructions for Authors for a complete description of levels of evidence. Copyright © 2016 by The Journal of Bone and Joint Surgery, Incorporated.

Eccentric exercises for the management of tendinopathy of the main body of the Achilles tendon with or without the AirHeel Brace. A randomized controlled trial. A: effects on pain and microcirculation.

Science.gov (United States)

Knobloch, Karsten; Schreibmueller, Louisa; Longo, Umile Giuseppe; Vogt, Peter M

2008-01-01

To compare eccentric training and the combination of eccentric training with the AirHeel Brace for the management of tendinopathy of the main body of the Achilles tendon. We recruited 116 subjects with unilateral tendinopathy of the main body of the Achilles tendon, who were randomized in two groups. Group A performed a regimen of daily eccentric training associated with the AirHeel Brace (Donjoy Orthopedics, Vista, CA, USA). Group B performed the same eccentric training without the AirHeel Brace. Tendon microcirculatory mapping was performed using combined Laser-Doppler and spectrophotometry. Pre- and post-operative FAOS score and VAS score were used to evaluate the patients. The FAOS score and the VAS score showed significant improvements from pre-operative to post-operative values in both groups (A 5.1 +/- 2 vs. 2.9 +/- 2.4, 43% reduction and B: 5.4 +/- 2.1 vs. 3.6 +/- 2.4, 33% reduction, both p = 0.0001). There were no statistically significant differences in FAOS score and VAS score when comparing the two groups after the end of the intervention. In Group A, tendon oxygen saturation in the main body of the Achilles tendon showed significant increase from pre- to post-management values (68 +/- 12 vs.74 +/- 8%, p = 0.003). Post-capillary venous filling pressures showed significant reduction from pre- to post-intervention values. Eccentric training, associated or not with the AirHeel Brace, produces the same effect in patients with tendinopathy of the main body of the Achilles tendon. The combination of eccentric training with the AirHeel Brace can optimize tendon microcirculation, but these micro-circulator advantages do not translate into superior clinical performance when compared with eccentric training alone.

Crystal structures of three co-crystals of 1,2-bis-(pyridin-4-yl)ethane with 4-alk-oxy-benzoic acids: 4-eth-oxy-benzoic acid-1,2-bis-(pyridin-4-yl)ethane (2/1), 4-n-propoxybenzoic acid-1,2-bis(pyridin-4-yl)ethane (2/1) and 4-n-but-oxy-benzoic acid-1,2-bis-(pyridin-4-yl)ethane (2/1).

Science.gov (United States)

Tabuchi, Yohei; Gotoh, Kazuma; Ishida, Hiroyuki

2015-11-01

The crystal structures of three hydrogen-bonded co-crystals of 4-alk-oxy-benzoic acid-1,2-bis-(pyridin-4-yl)ethane (2/1), namely, 2C9H10O3·C12H12N2, (I), 2C10H12O3·C12H12N2, (II), and 2C11H14O3·C12H12N2, (III), have been determined at 93, 290 and 93 K, respectively. In (I), the asymmetric unit consists of one 4-eth-oxy-benzoic acid mol-ecule and one half-mol-ecule of 1,2-bis-(pyridin-4-yl)ethane, which lies on an inversion centre. In (II) and (III), the asymmetric units each comprise two crystallographically independent 4-alk-oxy-benzoic acid mol-ecules and one 1,2-bis-(pyridin-4-yl)ethane mol-ecule. In each crystal, the two components are linked by O-H⋯N hydrogen bonds, forming a linear hydrogen-bonded 2:1unit of the acid and the base. Similar to the structure of 2:1 unit of (I), the units of (II) and (III) adopt nearly pseudo-inversion symmetry. The 2:1 units of (I), (II) and (III) are linked via C-H⋯O hydrogen bonds, forming tape structures.

Treatment of osteoarthritis of the knee with bracing: a scoping review

Directory of Open Access Journals (Sweden)

Steven Phillips

2016-06-01

Full Text Available Knee osteoarthritis is a leading cause of disability around the world. Knee bracing provides a conservative management option for symptom relief. A variety of different bracing types, manufacturers and products are currently available on the market. The goal of this study is to examine the current state of the literature regarding the treatment of knee osteoarthritis with unloader bracing, specifically examining the representation of specific brace types, manufacturers and models within the literature. A scoping review technique was used because of its ability to evaluate research activity within an area of study and identify gaps within the literature. A thorough search of the MEDLINE database was conducted for articles where a knee brace model was identified, and we identified characteristics of the studies to evaluate important information about the body of literature related to knee bracing for the treatment of osteoarthritis. Fifty eligible studies were identified. The majority of studies have been published in the United States, and a large increase in the number of publications in this field was seen between 2010-2014. The most prominent study type was prospective comparative studies (44%, however there is a lack of randomized controlled trials (6% within the literature. The most prominent hinge type within the literature is the dual hinge push brace, followed by the single hinge pull. While a large increase in the number of studies evaluating the treatment of knee osteoarthritis with bracing has occurred in the past 5 years, there is a lack of high quality studies evaluating the efficacy of the technique, as well as a lack of studies comparing bracing types and models.

The effect of ankle bracing on knee kinetics and kinematics during volleyball-specific tasks.

Science.gov (United States)

West, T; Ng, L; Campbell, A

2014-12-01

The purpose of this study was to examine the effects of ankle bracing on knee kinetics and kinematics during volleyball tasks. Fifteen healthy, elite, female volleyball players performed a series of straight-line and lateral volleyball tasks with no brace and when wearing an ankle brace. A 14-camera Vicon motion analysis system and AMTI force plate were used to capture the kinetic and kinematic data. Knee range of motion, peak knee anterior-posterior and medial-lateral shear forces, and peak ground reaction forces that occurred between initial contact with the force plate and toe off were compared using paired sample t-tests between the braced and non-braced conditions (P volleyball tasks. However, ankle bracing was demonstrated to reduce knee lateral shear forces during all of the lateral movement volleyball tasks. Wearing the Active Ankle T2 brace will not impact knee joint range of motion and may in fact reduce shear loading to the knee joint in volleyball players. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

[Influence of Ankle Braces on the Prevalence of Ankle Inversion Injuries in the Swiss Volleyball National League A].

Science.gov (United States)

Jaggi, J; Kneubühler, S; Rogan, S

2016-06-01

Ankle inversion is a common injury among volleyball players. The injury rate during a game is 2.1 times higher than during training. As a result, the preventive use of ankle braces is frequently observed in Swiss volleyball leagues. Studies have shown that ankle braces have a preventive effect on the prevalence of ankle inversion. In Switzerland there has been no investigation into the preventive use of braces and their influence on prevalence. For this reason, the goals of this study are 1) to determine when, why and by whom ankle braces are worn and 2) to evaluate the injury rate of users and non-users of ankle braces. A modified questionnaire was sent to 18 men's and women's teams of the Swiss National League A. The questionnaire included questions about injury rates and the circumstances of ankle inversion injuries. The data were statistically analysed with Microsoft Excel 2012 and SPSS Version 20. The overall response rate was 61 %, allowing data from 181 players to be analysed. 33 % (59 of 181) of the players used an ankle brace. There was a statistically significant difference in the prevalence of ankle inversion between users (12 injured) and non-users (8 injured) (p = 0.006). Wearing an ankle brace during training or during a game made no difference in the prevention of injuries (p = 0.356). More athletes were injured during training (n = 13) than during a game (n = 7). The results of the present study indicate that volleyball players preferably wear ankle braces to prevent injury. More than one third of the players in the study wore an ankle brace, 60 % for primary prevention and 40 % for secondary prevention due to a previous injury. The study shows that significantly more users than non-users of ankle braces were injured. This is contrary to literature. Furthermore it was shown that more injuries occur during training than during a game. This finding results from the fact that ankle braces were rarely worn during training. It is

A Novel Cyanide-Bridged Thulium-Nickel Heterobimetallic Polymeric Complex (H2O)2(DMF)10Tm2[Ni(CN)4]2[Ni(CN)4] including O-H···N Hydrogen Bond

International Nuclear Information System (INIS)

Chung, Janghoon; Park, Daeyoung; Song, Mina; Ha, Sungin; Kang, Ansoo; Moon, Sangbong; Ryu, Cheolhwi

2012-01-01

The experimental section lists the observed infrared absorption frequencies for the complex. Typically bridging CN ligands have higher stretching frequencies than the terminal CN ligands. Accordingly, cyanide stretching bands (2170, 2156, 2139 cm -1 . at higher frequencies than the stretching band (2127 cm -1 ) of K 2 [Ni(CN) 4 ] are assigned to bridging cyanide ligands. The band at 2128 cm -1 is assigned to terminal cyanide ligands because their location in the cyanide stretching region compares with the absorption observed for the nonbridging cyanide ligands in K 2 [Ni(CN) 4 ]. Array (H 2 O) 2 (DMF) 10 Tm 2 [Ni(CN) 4 ] 2 [Ni(CN) 4 ] and other lanthanide metal-Ni systems display similar CN stretching patterns in their spectra. A broad absorption band at 2950-3550 cm -1 was observed in the spectrum. This supports the presence of O-H···N intermolecular hydrogen bond interactions between the polymers

Lattice dynamic studies from {sup 151}Eu-Moessbauer spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Katada, Motomi [Tokyo Metropolitan Univ., Hachioji (Japan). Faculty of Science

1997-03-01

New complexes {l_brace}(Eu(napy){sub 2}(H{sub 2}O){sub 3})(Fe(CN){sub 6})4H{sub 2}O{r_brace}{sub x}, bpy({l_brace}(Eu(bpy)(H{sub 2}O){sub 4})(Fe(CN){sub 6})1.5bpy4H{sub 2}O{r_brace}{sub x}) and ({l_brace}(Eu(phen){sub 2}(H{sub 2}O){sub 2})(Fe(CN){sub 6})2phen{r_brace}{sub x}) etc were synthesized using phenanthroline and bipyridine. Lattice dynamic behaviors of Eu and Fe atom in the complexes were investigated by Moessbauer spectroscopy. By {sup 151}Eu-Moessbauer spectrum and parameters of new complexes, bpy complex showed the largest quadrupole splitting value, indicating bad symmetry of Eu ligand in the environment. Molecular structure of napy, bpy and phen complex were shown. These complexes are consisted of Eu atom coordinated with ligand and water molecule, of which (Fe(CN){sub 6}){sup 3-} ion formed one dimentional polymer chain and naphthyridines formed stacking structure. New complexes were observed by {sup 57}Fe-Moessbauer spectroscopy, too. The quadrupole splitting values were very different each other, indicating change of symmetry of Fe atom in the environment and three valence low spin state of Fe in the complex. (S.Y.)

Bracing can partially limit tibial rotation during stressful activities after anterior crucial ligament reconstruction with a hamstring graft.

Science.gov (United States)

Giotis, D; Paschos, N K; Zampeli, F; Pappas, E; Mitsionis, G; Georgoulis, A D

2016-09-01

Hamstring graft has substantial differences with BPTB graft regarding initial mechanical strength, healing sequence, and vascularization, which may imply that a different approach during rehabilitation period is required. The purpose of this study was to investigate the influence of knee bracing on tibial rotation in ACL-reconstructed patients with a hamstring autograft during high loading activities. The hypothesis was that there would be a decrease in tibial rotation in the ACL-reconstructed braced knee as compared to the unbraced knee. Twenty male patients having undergone unilateral ACL reconstruction with a semitendinosus/gracilis autograft were assessed. Kinematic data were collected with an eight-camera optoelectronic system during two stressful tasks: (1) descending from a stair and subsequent pivoting; and (2) landing from a platform and subsequent pivoting. In each patient, three different experimental conditions were evaluated: (A) wearing a prophylactic brace (braced condition); (B) wearing a patellofemoral brace (sleeved condition); (C) without brace (unbraced condition). The intact knee without brace served as a control. Tibial rotation was significantly lower in the intact knee compared to all three conditions of the ACL-reconstructed knee (P≤0.01 for both tasks). Presence of a brace or sleeve resulted in lower tibial rotation than in the unbraced condition (p=0.003 for descending/pivot and P=0.0004 for landing/pivot). The braced condition resulted in lower rotation than the sleeved condition for descending/pivoting (P=0.031) while no differences were found for landing/pivoting (P=0.230). Knee bracing limited the excessive tibial rotation during pivoting under high loading activities in ACL-reconstructed knees with a hamstring graft. This partial restoration of normal kinematics may have a potential beneficial effect in patients recovering from ACL reconstruction with a hamstring autograft. Level III, case-control therapeutic study. Copyright �

Quantifying the Lateral Bracing Provided by Standing Steam Roof Systems

OpenAIRE

Sorensen, Taylor J.

2016-01-01

One of the major challenges of engineering is finding the proper balance between economical and safe. Currently engineers at Nucor Corporation have ignored the additional lateral bracing provided by standing seam roofing systems to joists because of the lack of methods available to quantify the amount of bracing provided. Based on the results of testing performed herein, this bracing is significant, potentially resulting in excessively conservative designs and unnecessary costs. This proje...

Boundary condition effect on response modification factor of X-braced steel frames

Directory of Open Access Journals (Sweden)

Walid A. Attia

2018-04-01

Full Text Available Design of the structures to resist seismic force depends on the theory of dissipation in elastic energy that already exists in response modification factor “R-factor”. The main problem in codes gives a constant value for R-factor, since change in boundary conditions of building change in behavior of braced steel frame structures and that effects on R-factor. This study is an attempt to assess overstrength, ductility and response modification factor of X-braced steel frame under change in boundary conditions, as change in the direction of strong axis of column and connection support type of column besides variation in storey and bays numbers to be 21 frames and each frame has 8 different boundary conditions as sum of 168 cases for analysis. These frames were analyzed by using nonlinear static “pushover” analysis. As results of this study change in support type and direction of strong axis of column give large change in value of R-factor; the minimum value was 4.37 and maximum value 10.97. Minimum value is close to code value that’s mean the code is more conservative in suggesting of R-factor and gives a large factor of safety. Change in the location of bracing gives change in value of R-factor for all boundary conditions. Change in direction of strong axis of columns and support type didn’t give change in value of fundamental period, all boundary conditions. Keywords: Response modification factor, Ductility reduction factor, Overstrength factor, Boundary conditions, Brace frame, Nonlinear static analysis “Pushover”

Synthesis and biological activity of N-{l_brace}5-(4-methylphenyl) diazenyl-4-phenyl-1, 3-thiazole-2-yl{r_brace}benzamide derivatives

Energy Technology Data Exchange (ETDEWEB)

Prajapati, Ashishkumar K.; Modi, Vishal P. [The M.S. University of Baroda, Gujarat (India). Faculty of Technology and Engineering. Applied Chemistry Dept.

2011-07-01

In the present study, various amides of 2-amino-5-(4-methylphenyl)-diazenyl-4-phenyl-1, 3-thiazole was synthesized and their biological activities were evaluated. All the synthesized compounds were characterized by the combination of elemental analysis and standard spectroscopic methods. They are screened for anti-bacterial activity against Escherichia coli and Staphylococcus aureus as well as screened for antifungal activity against Aspergillus niger and Aspergillus oryzae by cup plate method at 1 {mu}g/ mL concentration in DMF. (author)

Prophylactic knee bracing alters lower-limb muscle forces during a double-leg drop landing.

Science.gov (United States)

Ewing, Katie A; Fernandez, Justin W; Begg, Rezaul K; Galea, Mary P; Lee, Peter V S

2016-10-03

Anterior cruciate ligament (ACL) injury can be a painful, debilitating and costly consequence of participating in sporting activities. Prophylactic knee bracing aims to reduce the number and severity of ACL injury, which commonly occurs during landing maneuvers and is more prevalent in female athletes, but a consensus on the effectiveness of prophylactic knee braces has not been established. The lower-limb muscles are believed to play an important role in stabilizing the knee joint. The purpose of this study was to investigate the changes in lower-limb muscle function with prophylactic knee bracing in male and female athletes during landing. Fifteen recreational athletes performed double-leg drop landing tasks from 0.30m and 0.60m with and without a prophylactic knee brace. Motion analysis data were used to create subject-specific musculoskeletal models in OpenSim. Static optimization was performed to calculate the lower-limb muscle forces. A linear mixed model determined that the hamstrings and vasti muscles produced significantly greater flexion and extension torques, respectively, and greater peak muscle forces with bracing. No differences in the timings of peak muscle forces were observed. These findings suggest that prophylactic knee bracing may help to provide stability to the knee joint by increasing the active stiffness of the hamstrings and vasti muscles later in the landing phase rather than by altering the timing of muscle forces. Further studies are necessary to quantify whether prophylactic knee bracing can reduce the load placed on the ACL during intense dynamic movements. Copyright © 2016 Elsevier Ltd. All rights reserved.

The unique N-terminal zinc finger of synaptotagmin-like protein 4 reveals FYVE structure.

Science.gov (United States)

Miyamoto, Kazuhide; Nakatani, Arisa; Saito, Kazuki

2017-12-01

Synaptotagmin-like protein 4 (Slp4), expressed in human platelets, is associated with dense granule release. Slp4 is comprised of the N-terminal zinc finger, Slp homology domain, and C2 domains. We synthesized a compact construct (the Slp4N peptide) corresponding to the Slp4 N-terminal zinc finger. Herein, we have determined the solution structure of the Slp4N peptide by nuclear magnetic resonance (NMR). Furthermore, experimental, chemical modification of Cys residues revealed that the Slp4N peptide binds two zinc atoms to mediate proper folding. NMR data showed that eight Cys residues coordinate zinc atoms in a cross-brace fashion. The Simple Modular Architecture Research Tool database predicted the structure of Slp4N as a RING finger. However, the actual structure of the Slp4N peptide adopts a unique C 4 C 4 -type FYVE fold and is distinct from a RING fold. To create an artificial RING finger (ARF) with specific ubiquitin-conjugating enzyme (E2)-binding capability, cross-brace structures with eight zinc-ligating residues are needed as the scaffold. The cross-brace structure of the Slp4N peptide could be utilized as the scaffold for the design of ARFs. © 2017 The Protein Society.

Application of different measures of skeletal maturity in initiating weaning from a brace for scoliosis: two case reports

Directory of Open Access Journals (Sweden)

Rivett LouAnn

2009-04-01

Full Text Available Abstract Introduction Various measures of skeletal maturity are used to initiate weaning from a brace in patients suffering from idiopathic scoliosis, resulting in different outcomes. We present two cases with double major curves, treated with the Rigo System Cheneau brace, and weaned using different criteria. Case presentation Case 1 was a South African, Caucasian girl who was initially treated with a brace at 14.75 years and who began weaning at 16.25 years on the basis of the Greulich and Pyle Index. She was out of her brace in 6 months, at least 11 months before reaching skeletal maturity as shown by the Risser Sign. Case 2 was a South African, Caucasian girl, initially treated with a brace at 14.25 years and who began the weaning process at 17.67 years on the basis of skeletal maturity according to the Risser Sign and static height for a period of 6 months. She was out of the brace 12 months later. In Case 1, the thoracic Cobb angle progressed during weaning and scoliometer readings deteriorated. The iliac apophysis fused 11 months after the wrist. In Case 2, the therapeutic gains made during the period of bracing were maintained during weaning, that is the improvement in the lumbar Cobb angle was maintained until the brace was removed, and scoliometer readings improved. The iliac apophysis fused 8.5 months after the wrist. Conclusions In patients with idiopathic scoliosis, it would seem to be more appropriate to base the timing of weaning on the Risser Sign and static height measurements rather than on traditional methods such as the Greulich and Pyle Index.

Chalcogenidosilicates: Ba/sub 2/SiTe/sub 4/ and Ba/sub 2/SiSe/sub 4/

Energy Technology Data Exchange (ETDEWEB)

Brinkmann, C; Eisenmann, B; Schaefer, H [Technische Hochschule Darmstadt (Germany, F.R.). Fachbereich Anorganische Chemie und Kernchemie

1985-05-01

The new compounds Ba/sub 2/SiSe/sub 4/ and Ba/sub 2/SiTe/sub 4/ crystallize in the monoclinic system, space group: P2/sub 1//m (No. 11) with the lattice constants Ba/sub 2/SiSe/sub 4/: a = 918.4(5) pm, b = 703.3(3) pm, c = 687.2(3) pm, ..beta.. = 109.2(1)/sup 0/, Ba/sub 2/SiTe/sub 4/: a = 965.0(5) pm, b = 762.6(3) pm, c = 746.6(3) pm, ..beta.. = 108.9(1)/sup 0/. Both compounds are isotypic to the Sr/sub 2/GeS/sub 4/ structure. Ba/sub 2/SiTe/sub 4/ is the first o-telluridosilicate with discrete SiTe/sub 4//sup 4 -/ anions.

Prophylactic Bracing Has No Effect on Lower Extremity Alignment or Functional Performance.

Science.gov (United States)

Hueber, Garrett A; Hall, Emily A; Sage, Brad W; Docherty, Carrie L

2017-07-01

Prophylactic ankle bracing is commonly used during physical activity. Understanding how bracing affects body mechanics is critically important when discussing both injury prevention and sport performance. The purpose is to determine if ankle bracing affects lower extremity mechanics during the Landing Error Scoring System test (LESS) and Sage Sway Index (SSI). Thirty physically active participants volunteered for this study. Participants completed the LESS and SSI in both a braced and unsupported conditions. Total errors were recorded for the LESS. Total errors and time (seconds) were recorded for the SSI. The Wilcoxon signed-rank test was utilized to evaluate any differences between the brace conditions for each dependent variable. A priori alpha level was set at pWilcoxon signed-rank test yielded no significant difference between the braced and unsupported conditions for the LESS (Z=-0.35, p=0.72), SSI time (Z=-0.36, p=0.72), or SSI Errors (Z=-0.37, p=0.71). Ankle braces had no effect on subjective clinical assessments of lower extremity alignment or postural stability. Utilization of a prophylactic support at the ankle did not substantially alter the proximal components of the lower kinetic chain. © Georg Thieme Verlag KG Stuttgart · New York.

The Basics of Braces

Science.gov (United States)

... wear a specially molded retainer — a small, hard piece of plastic with metal wires or a thin piece of plastic shaped like a mouthguard. Retainers keep ... Teeth Keeping Your Child's Teeth Healthy Word! Braces Going to the Dentist The Reality of Retainers What ...

Electronic and structural characterizations of unreconstructed {l_brace}0001{r_brace} surfaces and the growth of graphene overlayers

Energy Technology Data Exchange (ETDEWEB)

Emtsev, Konstantin

2009-06-03

The present work is focused on the characterization of the clean unreconstructed SiC{l_brace}0001{r_brace} surfaces and the growth of graphene overlayers thereon. Electronic properties of SiC surfaces and their interfaces with graphene and few layer graphene films were investigated by means of angle resolved photoelectron spectroscopy, X-ray photoelectron spectroscopy and low energy electron diffraction. Structural characterizations of the epitaxial graphene films grown on SiC were carried out by atomic force microscopy and low energy electron microscopy. Supplementary data was obtained by scanning tunneling microscopy. (orig.)

Bracing of the Reconstructed and Osteoarthritic Knee during High Dynamic Load Tasks.

Science.gov (United States)

Hart, Harvi F; Crossley, Kay M; Collins, Natalie J; Ackland, David C

2017-06-01

Lateral compartment osteoarthritis accompanied by abnormal knee biomechanics is frequently reported in individuals with knee osteoarthritis after anterior cruciate ligament reconstruction (ACLR). The aim of this study was to evaluate changes in knee biomechanics produced by an adjusted and unadjusted varus knee brace during high dynamic loading activities in individuals with lateral knee osteoarthritis after ACLR and valgus malalignment. Nineteen participants who had undergone ACLR 5 to 20 yr previously and had symptomatic and radiographic lateral knee osteoarthritis with valgus malalignment were assessed. Quantitative motion analysis experiments were conducted during hopping, stair ascent, and descent under three test conditions: (i) no brace, (ii) unadjusted brace with sagittal plane support and neutral frontal plane alignment, and (iii) adjusted brace with sagittal plane support and varus realignment (valgus to neutral). Sagittal, frontal, and transverse plane knee kinematics, external joint moment, and angular impulse data were calculated. Relative to an unbraced knee, braced conditions significantly increased knee flexion and adduction angles during hopping (P = 0.003 and P = 0.005; respectively), stair ascent (P = 0.003 and P stair ascent (P = 0.008) and flexion moments during stair descent (P = 0.006). There were no significant differences between the adjusted and the unadjusted brace conditions (P > 0.05). A knee brace, with or without varus alignment, can modulate knee kinematics and external joint moments during hopping, stairs ascent, and descent in individuals with predominant lateral knee osteoarthritis after ACLR. Longer-term use of a brace may have implications in slowing osteoarthritis progression.

Detorsion night-time bracing for the treatment of early onset idiopathic scoliosis.

Science.gov (United States)

Moreau, S; Lonjon, G; Mazda, K; Ilharreborde, B

2014-12-01

Management for early onset scoliosis has recently changed, with the development of new surgical procedures. However, multiple surgeries are often required and high complication rates are still reported. Conservative management remains an alternative, serial casting achieving excellent results in young children. Better compliance and improvement over natural history have been reported with night-time bracing in adolescent idiopathic scoliosis (AIS), but this treatment has never been reported in early onset idiopathic scoliosis (EIOS). All patients treated for progressive EOIS by detorsion night-time bracing (DNB), and meeting the Scoliosis Research Society (SRS) criteria for brace studies were reviewed. Recommendations were given to wear the DNB 8h/night and no restriction was given regarding sports activities. Radiological parameters were compared between referral and latest follow-up. Based on the SRS criteria defined for AIS, a similar classification was used as follows to analyze the course of the curves: success group: patients with a progression of 5° or less; unsuccess group (progression or failure): patients with a progression>5°, patients with curves exceeding 45° at maturity, or who have had recommendation for/undergone surgery, or patients who changed orthopaedic treatment, or who were lost to follow-up. Thirty-three patients were included (21 girls and 12 boys), with a median Cobb angle of 31° (Q1-Q3: 22-40). Age at brace initiation averaged 50months (Q1-Q3: 25-60). Median follow-up was 102-months (Q1-Q3: 63-125). Fifteen patients (45.5%) had reached skeletal maturity at last follow-up. The success rate was 67% (22 patients), with a median Cobb angle reduction of 15° (P<0.001). Four patients stopped DNB due to an important regression. Eleven patients were in the unsuccessful group (33%). Only one had surgery. All patients remained balanced in the frontal plane and normokyphotic. Initial curve magnitude and age at brace initiation appeared to be

Reforming the Belgian market for orthotic braces: what can we learn from the international experience?

Science.gov (United States)

Simoens, Steven; De Coster, Sandra; Moldenaers, Ingrid; Guillaume, Paul; Depoorter, Antony; Van den Steen, Dirk; Van de Sande, Stefaan; Debruyne, Hans; Ramaekers, Dirk; Lona, Murielle

2008-05-01

This article aims to review regulation governing outpatient orthotic braces (neck, wrist and knee braces) in France, the Netherlands and Sweden with a view to reforming the Belgian market. Information about the regulatory framework was derived from an analysis of legal texts and a survey completed by national experts. Strategies to keep down prices include public procurement in Sweden, maximum prices in France, and exclusion of expensive braces from reimbursement in the Netherlands. Reimbursement is linked to a medical indication or a chronic condition in France, the Netherlands and Sweden. To gain reimbursement, the cost-effectiveness of orthotic braces needs to be demonstrated in France and the Netherlands. Orthotic braces tend to be initially prescribed by a specialist physician and distributed by orthotists, medical equipment shops and/or community pharmacies. Extensive government intervention exists in the outpatient orthotic brace market in the countries studied. Our recommendations to reform the Belgian market for prefabricated orthotic braces are to separate reimbursement for service provision from reimbursement for braces; to set prices by means of a tendering process or an international price comparison; and to make reimbursement conditional on effectiveness and cost-effectiveness of braces.

The light-induced spin transition of tetranuclear spin crossover complex [Fe4(CN)4(bpy)4(tpa)2](PF6)4

International Nuclear Information System (INIS)

Nishihara, T; Tanaka, K; Nihei, M; Oshio, H

2009-01-01

We report on the light induced spin transition in the tetranuclear spin crossover complex [Fe 4 (CN) 4 (bpy) 4 (tpa) 2 ](PF 6 ) 4 . The photo-conversion occurs at the specific site (Fe2) of four Fe II ions. The red light irradiation (1.79 eV) gives rise to full conversion of Fe2 into the high spin state from the low spin state. The green light irradiation (2.33 eV) can convert only the half of Fe2 into the high spin state, though the photo-conversion rate in the beginning is much higher than that with the red light. We present a simple model in which the photo-conversion kinetics is controlled by a large background absorption due to remaining three Fe II ions (Fe1, Fe3 and Fe4).

Clinical practice guidelines for rest orthosis, knee sleeves, and unloading knee braces in knee osteoarthritis.

Science.gov (United States)

Beaudreuil, Johann; Bendaya, Samy; Faucher, Marc; Coudeyre, Emmanuel; Ribinik, Patricia; Revel, Michel; Rannou, François

2009-12-01

To develop clinical practice guidelines concerning the use of bracing--rest orthosis, knee sleeves and unloading knee braces--for knee osteoarthritis. The French Physical Medicine and Rehabilitation Society (SOFMER) methodology, associating a systematic literature review, collection of everyday clinical practice, and external review by multidisciplinary expert panel, was used. Few high-level studies of bracing for knee osteoarthritis were found. No evidence exists for the effectiveness of rest orthosis. Evidence for knee sleeves suggests that they decrease pain in knee osteoarthritis, and their use is associated with subjective improvement. These actions do not appear to depend on a local thermal effect. The effectiveness of knee sleeves for disability is not demonstrated for knee osteoarthritis. Short- and mid-term follow-up indicates that valgus knee bracing decreases pain and disability in medial knee osteoarthritis, appears to be more effective than knee sleeves, and improves quality of life, knee proprioception, quadriceps strength, and gait symmetry, and decreases compressive loads in the medial femoro-tibial compartment. However, results of response to valgus knee bracing remain inconsistent; discomfort and side effects can result. Thrombophlebitis of the lower limbs has been reported with the braces. Braces, whatever kind, are infrequently prescribed in clinical practice for osteoarthritis of the lower limbs. Modest evidence exists for the effectiveness of bracing--rest orthosis, knee sleeves and unloading knee braces--for knee osteoarthritis, with only low level recommendations for its use. Braces are prescribed infrequently in French clinical practice for osteoarthritis of the knee. Randomized clinical trials concerning bracing in knee osteoarthritis are still necessary.

Phase behaviour and molecular dynamics in the binary system of sodium perchlorate and 1,2-propanediamine

Energy Technology Data Exchange (ETDEWEB)

Terashima, Yukio [Department of Natural Science Education, Joint Graduate School, Hyogo University of Teacher Education (Japan); Takeda, Kiyoshi, E-mail: takeda@naruto-u.ac.j [Department of Chemistry, Naruto University of Education, 748 Nakajima, Takashima Naruto-cho, Naruto, Tokushima 772-8502 (Japan); Honda, Makoto [Department of Physics, Naruto University of Education (Japan)

2011-03-15

The phase and glass transition behaviour in a binary mixture of sodium perchlorate and 1,2-propanediamine {l_brace}(NaClO{sub 4}){sub x}(12PDA){sub 1-x}, x < 0.40{r_brace} was investigated by differential scanning calorimetry and Raman scattering measurements. A eutectic point and a peritectic point were found at x = 0.17 and 0.19, respectively. The phase diagram indicates the existence of solvated compounds of (NaClO{sub 4}){sub 1}(12PDA){sub 4} and (NaClO{sub 4}){sub 2}(12PDA){sub 5}. The concentration dependence of the glass transition point shows a sigmoid curve implying an underlying anomaly.

Physical Properties of (NH4)2Pt(CN)4[Clo.42].3H2O: A new Quasi-One-Dimensional Conductor

DEFF Research Database (Denmark)

Carneiro, Kim; Petersen, A. S.; Underhill, A. E.

1979-01-01

The quasi-one-dimensional conductor (NH4)2[Pt(CN)4]Cl0.42·3H2O, ACP(Cl), has been studied experimentally by means of electrical conduction measurements, x-ray diffuse scattering, and neutron inelastic scattering. This allows the determination of all the physical parameters of interest for the the......The quasi-one-dimensional conductor (NH4)2[Pt(CN)4]Cl0.42·3H2O, ACP(Cl), has been studied experimentally by means of electrical conduction measurements, x-ray diffuse scattering, and neutron inelastic scattering. This allows the determination of all the physical parameters of interest...

2D water layer enclathrated between Mn(II)-Ni(CN)4 coordination frameworks

International Nuclear Information System (INIS)

Ray, Ambarish; Bhowmick, Indrani; Sheldrick, William S.; Jana, Atish Dipankar; Ali, Mahammed

2009-01-01

A [Ni(CN) 4 ] 2- based two-dimensional Mn(II) coordination polymer {Mn(H 2 O) 2 [NiCN] 4 .4H 2 O}, in which the coordination layers are stacked on top of each other sandwiching 2D water layer of boat-shaped hexagonal water clusters has been synthesized. The complex exhibits high thermal decomposition temperature and reversible water absorption, which were clearly demonstrated by thermal and PXRD studies on the parent and rehydrated complex after dehydration. - Abstract: A coordination polymer, {Mn(H 2 O) 2 [NiCN] 4 .4H 2 O} n , showed that the coordination layers are stacked on top of each other sandwiching 2D ice layer of boat-shaped hexagonal water clusters . Display Omitted

Early weaning might reduce the psychological strain of Boston bracing

DEFF Research Database (Denmark)

Andersen, Mikkel Ø; Andersen, Gert Rahbek; Thomsen, Karsten

2002-01-01

From 1983 to 1990 a total of 136 patients with adolescent idiopathic scoliosis were treated with the Boston brace. With the aim of examining the social and psychological impact of the brace treatment all patients received a questionnaire at an average of 3.5 years after termination of the treatment...

Curve progression after long-term brace treatment in adolescent idiopathic scoliosis: comparative results between over and under 30 Cobb degrees - SOSORT 2017 award winner

Directory of Open Access Journals (Sweden)

Angelo G. Aulisa

2017-10-01

Full Text Available Abstract Background The factors influencing curve behavior following bracing are incompletely understood and there is no agreement if scoliotic curves stop progressing with skeletal maturity. The aim of this study was to evaluate the loss of the scoliotic curve correction in patients treated with bracing during adolescence and to compare patient outcomes of under and over 30 Cobb degrees, 10 years after brace removal. Methods We reviewed 93 (87 female of 200 and nine patients with adolescent idiopathic scoliosis (AIS who were treated with the Lyon or PASB brace at a mean of 15 years (range 10–35. All patients answered a simple questionnaire (including work status, pregnancy, and pain and underwent clinical and radiological examination. The population was divided into two groups based on Cobb degrees ( 30°. Statistical analysis was performed to test the efficacy of our hypothesis. Results The patients underwent a long-term follow-up at a mean age of 184.1 months (±72.60 after brace removal. The pre-brace scoliotic mean curve was 32.28° (± 9.4°; after treatment, the mean was 19.35° and increased to a minimum of 22.12° in the 10 years following brace removal. However, there was no significant difference in the mean Cobb angle between the end of weaning and long term follow-up period (p = 0.105. The curve angle of patients who were treated with a brace from the beginning was reduced by 13° during the treatment, but the curve size lost 3° at the follow-up period. The groups over 30° showed a pre-brace scoliotic mean curve of 41.15°; at the end of weaning, the mean curve angle was 25.85° and increased to a mean of 29.73° at follow-up; instead, the groups measuring ≤ 30° showed a pre-brace scoliotic mean curve of 25.58°; at the end of weaning, it was reduced to a mean of 14.24° and it increased to 16.38° at follow-up. There was no significant difference in the mean progression of curve magnitude between the ≤ 30° and

An innovative seismic bracing system based on a superelastic shape memory alloy ring

International Nuclear Information System (INIS)

Gao, Nan; Jeon, Jong-Su; DesRoches, Reginald; Hodgson, Darel E

2016-01-01

Shape memory alloys (SMAs) have great potential in seismic applications because of their remarkable superelasticity. Seismic bracing systems based on SMAs can mitigate the damage caused by earthquakes. The current study investigates a bracing system based on an SMA ring which is capable of both re-centering and energy dissipation. This lateral force resisting system is a cross-braced system consisting of an SMA ring and four tension-only cable assemblies, which can be applied to both new construction and seismic retrofit. The performance of this bracing system is examined through a quasi-static cyclic loading test and finite element (FE) analysis. This paper describes the experimental design in detail, discusses the experimental results, compares the performance with other bracing systems based on SMAs, and presents an Abaqus FE model calibrated on the basis of experimental results to simulate the superelastic behavior of the SMA ring. The experimental results indicate that the seismic performance of this system is promising in terms of damping and re-centering. The FE model can be used in the simulation of building structures using the proposed bracing system. (paper)

Conservative treatment for pediatric lumbar spondylolysis to achieve bone healing using a hard brace: what type and how long?: Clinical article.

Science.gov (United States)

Sairyo, Koichi; Sakai, Toshinori; Yasui, Natsuo; Dezawa, Akira

2012-06-01

Various kinds of trunk braces have been used to achieve bone healing in cases of pediatric lumbar spondylolysis. However, the optimal brace for achieving bone healing is unclear. The purpose of the present study was to determine in what types of spondylolysis bone healing can be achieved and how long it takes. In this prospective study, 63 pars interarticularis defects (spondylolysis) among 37 patients who were younger than 18 years (mean 13.5 ± 2.7 years) were treated using a hard brace. The youngest patient was 8 years old. Based on the results of CT scanning, the lyses were classified into 3 categories: early, progressive, and terminal defects. Progressive defects were further divided into 2 types according to STIR MRI findings: those with high signal intensity at the adjacent pedicle and those with low signal intensity (that is, a normal appearance). A hard brace, such as a molded plastic thoracolumbosacral orthosis, was used to immobilize the trunk. Approximately every 3 months, CT scanning was performed to evaluate bone healing until approximately 6 months. The union rates were 94%, 64%, 27%, and 0% for the early, progressive with high signal intensity, progressive with low signal intensity, and terminal defects, respectively. It was noted that no terminal defect was healed using conservative treatment. The mean time to healing among the defects that showed bone healing was 3.2, 5.4, and 5.7 months for the early, progressive with high signal intensity, and progressive with low signal intensity groups, respectively. Patients with early-stage defects are the best candidates for conservative treatment with a hard brace because more than 90% of such cases can be healed in 3 months.

SEISMIC FRAGILITY ANALYSIS OF IMPROVED RC FRAMES USING DIFFERENT TYPES OF BRACING

Directory of Open Access Journals (Sweden)

HAMED HAMIDI JAMNANI

2017-04-01

Full Text Available Application of bracings to increase the lateral stiffness of building structures is a technique of seismic improvement that engineers frequently have recourse to. Accordingly, investigating the role of bracings in concrete structures along with the development of seismic fragility curves are of overriding concern to civil engineers. In this research, an ordinary RC building, designed according to the 1st edition of Iranian seismic code, was selected for examination. According to FEMA 356 code, this building is considered to be vulnerable. To improve the seismic performance of this building, 3 different types of bracings, which are Concentrically Braced Frames, Eccentrically Braced Frames and Buckling Restrained Frames were employed, and each bracing element was distributed in 3 different locations in the building. The researchers developed fragility curves and utilized 30 earthquake records on the Peak Ground Acceleration seismic intensity scale to carry out a time history analysis. Tow damage scale, including Inter-Story Drifts and Plastic Axial Deformation were also used. The numerical results obtained from this investigation confirm that Plastic Axial Deformation is more reliable than conventional approaches in developing fragility curves for retrofitted frames. In lieu of what is proposed, the researchers selected the suitable damage scale and developed and compared log-normal distribution of fragility curves first for the original and then for the retrofitted building.

Multilevel Thoracolumbar Spondylolysis with Spondylolisthesis at L4 on L5.

Science.gov (United States)

Kim, Whoan Jeang; Song, Young Dong; Choy, Won Sik

2015-09-01

A 24-year-old male patient was initially evaluated for persistent back pain. The visual analogue scale (VAS) score was 7 points. Physical examination revealed a decreased range of lumbar spinal motion, which caused pain. Simple X-ray revealed Meyerding grade 1 spondylolisthesis at L4 on L5, with mild dome-shaped superior endplate and consecutive multilevel spondylolysis at T12-L5. Standing anteroposterior and lateral views of the entire spine revealed normal balance of sagittal and coronal alignment. A computed tomography scan revealed bilateral spondylolysis at T12-L4, left unilateral spondylolysis at L5, and spina bifida at L5 to sacral region. Magnetic resonance imaging revealed mild dural ectasia at the lumbar region. Due to the absence of any neurological symptoms, the patient was managed conservatively. He was rested a few weeks with corset brace and physiotherapy. After treatment, his back pain improved, VAS score changed from 7 to 2, and he was able to return to normal activity.

Introduction to the "Scoliosis" Journal Brace Technology Thematic Series: increasing existing knowledge and promoting future developments

Directory of Open Access Journals (Sweden)

Grivas Theodoros B

2010-01-01

Full Text Available Abstract Bracing is the main non-surgical intervention in the treatment of idiopathic scoliosis during growth, in hyperkyphosis (and Scheuermann disease and occasionally for spondylolisthesis; it can be used in adult scoliosis, in the elderly when pathological curves lead to a forward leaning posture or in adults after traumatic injuries. Bracing can be defined as the application of external corrective forces to the trunk; rigid supports or elastic bands can be used and braces can be custom-made or prefabricated. The state of research in the field of conservative treatment is insufficient and while it can be stated that there is some evidence to support bracing, we must also acknowledge that today we do not have a common and generally accepted knowledge base, and that instead, individual expertise still prevails, giving rise to different schools of thought on brace construction and principles of correction. The only way to improve the knowledge and understanding of brace type and brace function is to establish a single and comprehensive source of information about bracing. This is what the Scoliosis Journal is going to do through the "Brace Technology" Thematic Series, where technical papers coming from the different schools will be published.

Tellurium sulfates from reactions in oleum and sulfur trioxide: syntheses and crystal structures of TeO(SO{sub 4}), Te{sub 4}O{sub 3}(SO{sub 4}){sub 5}, and Te(S{sub 2}O{sub 7}){sub 2}

Energy Technology Data Exchange (ETDEWEB)

Logemann, Christian; Bruns, Joern; Schindler, Lisa Verena; Zimmermann, Vanessa; Wickleder, Mathias S. [Carl von Ossietzky University of Oldenburg, Institute of Chemistry (Germany)

2015-04-15

The reaction of K{sub 2}TeO{sub 4} with fuming sulfuric acid (65 % SO{sub 3}) in sealed glass ampoules at 250 C led to colorless single crystals of TeO(SO{sub 4}) [triclinic, P anti 1, Z = 8, a = 819.89(3) pm, b = 836.95(4) pm, c = 1179.12(5) pm, α = 82.820(2) , β = 70.645(2) , γ = 81.897(2) , V = 753.11(6) x 10{sup 6} pm{sup 3}]. A horseshoe type [Te{sub 4}O{sub 3}] fragment is the basic motif in the layer structure of the compound. The [Te{sub 4}O{sub 3}] moieties are linked to infinite chains by further oxide ions. Monomeric [Te{sub 4}O{sub 3}] horseshoes are found in the crystal structure of Te{sub 4}O{sub 3}(SO{sub 4}){sub 5} [trigonal, P3{sub 2}21, Z = 3, a = 859.05(2) pm, c = 2230.66(7) pm, V = 1425.61(6) x 10{sup 6} pm{sup 3}], which was obtained from TeO{sub 2} and fuming sulfuric acid (65 % SO{sub 3}) at 200 C as colorless single crystals. By switching to neat SO{sub 3} as reaction medium colorless crystals of Te(S{sub 2}O{sub 7}){sub 2} [P2{sub 1}/n, Z = 4, a = 1065.25(3) pm, b = 818.50(2) pm, c = 1206.27(3) pm, β = 102.097(1) , V = 1028.40(5) x 10{sup 6} pm{sup 3}] form when ortho-telluric acid, H{sub 6}TeO{sub 6}, is used as the tellurium source. The compound was reported previously, however, obviously with a wrong crystallographic description. In the crystal structure the tellurium atoms are coordinated by two chelating disulfate ions. Further Te-O contacts link the [Te(S{sub 2}O{sub 7}){sub 2}] units to an extended network. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Control of a flexible bracing manipulator: Integration of current research work to realize the bracing manipulator

Science.gov (United States)

Kwon, Dong-Soo

1991-01-01

All research results about flexible manipulator control were integrated to show a control scenario of a bracing manipulator. First, dynamic analysis of a flexible manipulator was done for modeling. Second, from the dynamic model, the inverse dynamic equation was derived, and the time domain inverse dynamic method was proposed for the calculation of the feedforward torque and the desired flexible coordinate trajectories. Third, a tracking controller was designed by combining the inverse dynamic feedforward control with the joint feedback control. The control scheme was applied to the tip position control of a single link flexible manipulator for zero and non-zero initial condition cases. Finally, the contact control scheme was added to the position tracking control. A control scenario of a bracing manipulator is provided and evaluated through simulation and experiment on a single link flexible manipulator.

Twitter analysis of the orthodontic patient experience with braces vs Invisalign.

Science.gov (United States)

Noll, Daniel; Mahon, Brendan; Shroff, Bhavna; Carrico, Caroline; Lindauer, Steven J

2017-05-01

To examine the orthodontic patient experience having braces compared with Invisalign by means of a large-scale Twitter sentiment analysis. A custom data collection program was created that collected tweets containing the words "braces" or "Invisalign" for a period of 5 months. A hierarchal Naïve Bayes sentiment analysis classifier was developed to sort the tweets into five categories: positive, negative, neutral, advertisement, or not applicable. Each category was then analyzed for specific content. A total of 419,363 tweets applicable to orthodontics were collected. Users posted significantly more positive tweets (61%) than they did negative tweets (39%; P ≤ .0001). There was no significant difference in the distribution of positive and negative sentiment between braces and Invisalign tweets (P = .4189). Positive orthodontics-related tweets often highlighted gratitude for a great smile accompanied with selfies. Negative orthodontic tweets frequently focused on pain. Twitter users expressed more positive than negative sentiment about orthodontic treatment with no significant difference in sentiment between braces and Invisalign tweets.

An Experimental Study on Non-Compression X-Bracing Systems Using Carbon Fiber Composite Cable for Seismic Strengthening of RC Buildings

Directory of Open Access Journals (Sweden)

Kang Seok Lee

2015-09-01

Full Text Available Cross-bracing (X-bracing is one of the most popular methods of seismic retrofitting, and has been shown to significantly increase the structural stiffness and strength of buildings. Conventional steel X-bracing methods typically exhibit brittle failure at the connection between the brace and the building, or buckling failure of the braces. This study investigated the structural properties of a new type of non-compression X-bracing system using carbon fiber composite cable (CFCC. This non-compression X-bracing system uses CFCC bracing and bolt connections between structural members and the terminal fixer of the CFCC, instead of conventional steel bracing. The aim is to overcome the brittle and buckling failures that can occur at the connection and bracings with conventional steel X-bracing methods. We carried out cyclic loading tests, and the maximum load carrying capacity and deformation were investigated, as well as hysteresis in the lateral load–drift relations. The test results revealed that the CFCC X-bracing system installed in reinforced concrete frames enhanced the strength markedly, and buckling failure of the bracing was not observed.

Effect of Kınesıotapıng and Knee Brace on Functıonal Performance in Recreatıonal Athletes

Science.gov (United States)

Ulusoy, Burak; İldiz, Bülent; Tunay, Volga Bayrakçı

2014-01-01

Objectives: Kinesiotaping is a popular taping method that is used for both therapeutic and performance enchancement purposes. Knee braces are widely used for prevention in sport injuries but their performance effectiveness is still controversial. The aim of this study was to determine whether kinesiotape or brace was more effective on functional performance. Methods: A total twenty male recreational football players (Mean±Standart Deviation (SD) age: 22.5±0.68 years, height: 175.15±3.37 cm, body weight: 74.52±12.41 kg), voluntarily participated in this study. Participants were tested with kinesiotape, with brace and without kinesiotape and brace. Tests were applied one day after patellar kinesiotaping (correction technique). Balance property measured with Modified Y balance Test (dynamic test), agility measured by T test, muscle strength and anaerobic power assessed by vertical jump and triple hop tests. Wilcoxon signed rank test was employed for determining the statistical significance of tests with kinesiotape, with brace and without kinesiotape and brace. Results: In analysis; There were statistically significant differences found in Triple hop test with kinesiotaping and without kinesiotaping and brace, in T test with bracing and kinesiotaping, in vertical jump with kinesiotaping and without kinesiotaping and brace (pkinesiotaping in all tests) No statistically significant difference was found in modified Y balance test all groups (p> 0.05). Conclusion: Consequently, kinesiotaping had positive effects on agility and muscle strength but had no effects on balance in football players. On the other hand, brace had no effects on functional performance tests.

Expecting ankle tilts and wearing an ankle brace influence joint control in an imitated ankle sprain mechanism during walking.

Science.gov (United States)

Gehring, Dominic; Wissler, Sabrina; Lohrer, Heinz; Nauck, Tanja; Gollhofer, Albert

2014-03-01

A thorough understanding of the functional aspects of ankle joint control is essential to developing effective injury prevention. It is of special interest to understand how neuromuscular control mechanisms and mechanical constraints stabilize the ankle joint. Therefore, the aim of the present study was to determine how expecting ankle tilts and the application of an ankle brace influence ankle joint control when imitating the ankle sprain mechanism during walking. Ankle kinematics and muscle activity were assessed in 17 healthy men. During gait rapid perturbations were applied using a trapdoor (tilting with 24° inversion and 15° plantarflexion). The subjects either knew that a perturbation would definitely occur (expected tilts) or there was only the possibility that a perturbation would occur (potential tilts). Both conditions were conducted with and without a semi-rigid ankle brace. Expecting perturbations led to an increased ankle eversion at foot contact, which was mediated by an altered muscle preactivation pattern. Moreover, the maximal inversion angle (-7%) and velocity (-4%), as well as the reactive muscle response were significantly reduced when the perturbation was expected. While wearing an ankle brace did not influence muscle preactivation nor the ankle kinematics before ground contact, it significantly reduced the maximal ankle inversion angle (-14%) and velocity (-11%) as well as reactive neuromuscular responses. The present findings reveal that expecting ankle inversion modifies neuromuscular joint control prior to landing. Although such motor control strategies are weaker in their magnitude compared with braces, they seem to assist ankle joint stabilization in a close-to-injury situation. Copyright © 2013 Elsevier B.V. All rights reserved.

Effectiveness of an Outside-the-Boot Brace in Reducing Parachuting Related Ankle Injuries

National Research Council Canada - National Science Library

Schmidt, M. D; Sulsky, S. I; Amoroso, P. J

2005-01-01

.... Multiple logistic regression analysis estimated adjusted odds ratios (OR) and 95% confidence intervals for injury outcomes, comparing pre and post brace periods to the brace protocol period. Setting...

[Effects of acupuncture at left and right Hegu (LI 4) for cerebral function laterality].

Science.gov (United States)

Wang, Linying; Xu, Chunsheng; Zhu, Yifang; Li, Chuanfu; Yang, Jun

2015-08-01

To explore the cerebral function laterality of acupuncture at left and right Hegu (LI 4) by using functional magnetic resonance imaging (fMRI) and provide objective evidences for side selection of Hegu (LI 4) in the clinical application. Eighty healthy volunteers were randomly divided into a left-acupoint group and a right-acupoint group, and they were treated with acupuncture at left Hegu (LI 4) and right Hegu (LI 4) respectively. After the arrival of qi, the task-state fMRI data in both groups was collected, and analysis of functional neuroimages (AFNI) software was used to perform intra-group and between-group comparisons. After acupuncture, acupuncture feelings were recorded and MGH acupuncture sensation scale (MASS) was recorded. The difference of MASS between the two groups was not significant (P>0. 05). The result of left-acupoint group showed an increased signal on right cerebral hemisphere, while the right-acupoint group showed extensive signal changes in both cerebral hemispheres. The analysis between left-acupoint group and retroflex right-acupoint group showed differences in brain areas. The central effect of acupuncture at left and right Hegu (LI 4) is dissymmetry, indicating right hemisphere laterality. The right lobus insularis and cingulate gyrus may be the key regions in the acupuncture at Hegu (LI 4).

Gait comparison of subjects with hemiplegia walking unbraced, with ankle-foot orthosis, and with Air-Stirrup brace.

Science.gov (United States)

Burdett, R G; Borello-France, D; Blatchly, C; Potter, C

1988-08-01

The effects of the Air-Stirrup (AS) standard ankle brace on the gait of 19 subjects with hemiplegia resulting from a cerebrovascular accident who exhibited excessive subtalar joint motion were studied. Videotaped trials and footprint analyses were used to measure subjects' hip, knee, and ankle sagittal plane angles; inversion and eversion of the calcaneus; and time-distance gait characteristics. A one-way analysis of variance for repeated measures was used to compare the gait of 19 subjects with the AS brace and unbraced and 11 subjects with the AS brace, unbraced, and with an ankle-foot orthosis. The AS brace was associated with more calcaneal stability during standing than the unbraced condition. The ankle-foot orthosis was associated with less plantar flexion at foot-strike than either the AS brace or unbraced condition. Both the AS brace and the ankle-foot orthosis were associated with less mid-swing plantar flexion and increased step length on the paretic side compared with no brace. These results support the effectiveness of the AS brace in controlling inversion and eversion instability in patients with hemiplegia.

Low-Cost Alternative External Rotation Shoulder Brace and Review of Treatment in Acute Shoulder Dislocations

Directory of Open Access Journals (Sweden)

Lacy, Kyle

2015-01-01

Full Text Available Traumatic dislocations of the shoulder commonly present to emergency departments (EDs. Immediate closed reduction of both anterior and posterior glenohumeral dislocations is recommended and is frequently performed in the ED. Recurrence of dislocation is common, as anteroinferior labral tears (Bankart lesions are present in many anterior shoulder dislocations.14,15,18,23 Immobilization of the shoulder following closed reduction is therefore recommended; previous studies support the use of immobilization with the shoulder in a position of external rotation, for both anterior and posterior shoulder dislocations.7-11,19 In this study, we present a technique for assembling a low-cost external rotation shoulder brace using materials found in most hospitals: cotton roll, stockinette, and shoulder immobilizers. This brace is particularly suited for the uninsured patient, who lacks the financial resources to pay for a pre-fabricated brace out of pocket. We also performed a cost analysis for our low-cost external rotation shoulder brace, and a cost comparison with pre-fabricated brand name braces. At our institution, the total materials cost for our brace was $19.15. The cost of a pre-fabricated shoulder brace at our institution is $150 with markup, which is reimbursed on average at $50.40 according to our hospital billing data. The low-cost external rotation shoulder brace is therefore a more affordable option for the uninsured patient presenting with acute shoulder dislocation. [West J Emerg Med. 2015;16(1:114–120.

Soft braces in the treatment of Adolescent Idiopathic Scoliosis (AIS – Review of the literature and description of a new approach

Directory of Open Access Journals (Sweden)

Weiss Hans-Rudolf

2012-05-01

Full Text Available Abstract Background The use of soft braces to treat scoliosis has been described by Fischer as early as 1876. With the help of elastic straps, as the authors suggested, a corrective movement for individual curve patterns should be maintained in order to inhibit curve progression. Today this concept has been revived besides soft 3 point pressure systems. Some shortcomings have been revealed in literature in comparison with hard braces, however the concept of improving quality of life of a patient while under brace treatment should furtherly be considered as valuable. Purpose of this review is to gather the body of evidence existent for the use of soft braces and to present recent developments. Method A review of literature as available on Pub Med was performed using the key words ‘scoliosis’ and ‘soft brace’ at first. The search was expanded using ‘scoliosis’ and the known trademarks (1 ‘scoliosis’ and ‘SpineCor’, (2 ‘scoliosis’ and ‘TriaC’, (3 ‘scoliosis’ and ‘St. Etienne brace’, (4 ‘scoliosis’ and ‘Olympe’. The papers considered for inclusion were new technical descriptions, preliminary results, cohort studies and controlled studies. Results When searching for the terms ‘scoliosis’ and ‘SpineCor’: 20 papers have been found, most of them investigating a soft brace, for ‘scoliosis’ and ‘TriaC’: 7 papers displayed, for ‘scoliosis’ and ‘St. Etienne brace’: one paper displayed but not meeting the topic and for ‘scoliosis’ and ‘Olympe’: No paper displayed. Four papers found on the SpineCor™ were of prospective controlled or prospective randomized design. These papers partly presented contradictory results. Two papers were on soft Boston braces used in patients with neuromuscular scoliosis. Discussion There is a small but consistent body of evidence for the use of soft braces in the treatment of scoliosis. Contradictory results have been published for samples treated during

A Survey of Parachute Ankle Brace Breakages

National Research Council Canada - National Science Library

Knapik, Joseph J; Spiess, Anita; Darakjy, Salima; Grier, Tyson; Manning, Fred; Livingston, Elaine; Swedler, David; Amoroso, Paul; Jones, Bruce H

2008-01-01

...) of the Defense Safety Oversight Council (DSOC) to evaluate the parachute ankle brace (PAB). Information provided by the questionnaire identified potential injury risk factors and comments on the PAB...

Cyanide bridged hetero-metallic polymeric complexes: Syntheses, vibrational spectra, thermal analyses and crystal structures of complexes [M(1,2-dmi)2Ni(μ-CN)4]n (M = Zn(II) and Cd(II))

Science.gov (United States)

Kürkçüoğlu, Güneş Süheyla; Sayın, Elvan; Şahin, Onur

2015-12-01

Two cyanide bridged hetero-metallic complexes of general formula, [M(1,2-dmi)2Ni(μ-CN)4]n (1,2-dmi = 1,2-dimethylimidazole and M = Zn(II) or Cd(II)) have been synthesized and characterized by vibrational (FT-IR and Raman) spectroscopy, single crystal X-ray diffraction, thermal analyses and elemental analyses. The crystallographic analyses reveal that the complexes, [Zn(1,2-dmi)2Ni(μ-CN)4] (1) and [Cd(1,2-dmi)2Ni(μ-CN)4] (2), have polymeric 2D networks. In the complexes, four cyanide groups of [Ni(CN)4]2- coordinated to the adjacent M(II) ions and distorted octahedral geometries of complexes are completed by two nitrogen atoms of trans 1,2-dmi ligands. The structures of 1 and 2 are similar and linked via intermolecular hydrogen bonding, C-H⋯Ni interactions to give rise to 3D networks. Vibration assignments are given for all the observed bands and the spectral features also supported to the crystal structures of heteronuclear complexes. The FT-IR and Raman spectra of the complexes are very much consistent with the structural data presented.

Room temperature photoluminescence in crystalline/amorphous Er-doped Cd{sub 2}V{sub 2}O{sub 7}

Energy Technology Data Exchange (ETDEWEB)

Cid-Garcia, A. [Benemerita Universidad Autonoma de Puebla. Postgrado en Fisica Aplicada. Facultad de Ciencias Fisico-Matematicas, Mexico (Mexico); Lozada-Morales, R., E-mail: rlozada@fcfm.buap.mx [Benemerita Universidad Autonoma de Puebla. Postgrado en Fisica Aplicada. Facultad de Ciencias Fisico-Matematicas, Mexico (Mexico); Lopez-Calzada, G. [Centro de Investigacion y de Estudios Avanzados del IPN, Unidad Queretaro, Apartado Postal 1-798, Queretaro, Qro. 76001 (Mexico); Zayas, Ma. E. [Departamento de Investigacion en Fisica de la Universidad de Sonora, Edificio 3I, Blvd. Edificio 5 E, Luis Encinas s/n, Col. Centro, 83000. Hermosillo, Sonora, Mexico (Mexico); Zelaya Angel, O. [Departamento de Fisica, Centro de Investigacion y de Estudios Avanzados, P.O. Box 14-740, Mexico 07360 D. F. (Mexico); and others

2012-06-15

Er{sup 3+} ions were introduced into a new type of oxide matrixes prepared with different proportions of CdO and V{sub 2}O{sub 5}. The source of Er{sup 3+} employed was Er(NO{sub 3}){sub 3}{center_dot}5H{sub 2}O, which yielded an Er{sup 3+} concentration of {approx}1 at%. Depending on the reactants proportions, the samples resulted in crystalline or amorphous structures. X-ray diffraction indicated that the crystalline samples were constituted by polycrystalline Cd{sub 2}V{sub 2}O{sub 7}, in agreement with Raman spectroscopy measurements. Depending on the proportions of the component oxides, the band gap changed in the 2.49-1.77 eV energy range, as determined through photoacoustic spectroscopy. From photoluminescence spectra, the following electronic transitions of Er{sup 3+} were observed in both types of samples: {l_brace}{sup 2}H{sub 11/2}, {sup 4}S{sub 3/2}, {sup 4}F{sub 9/2}, {sup 4}I{sub 9/2}{r_brace}{yields}{sup 4}I{sub 15/2} and {sup 4}S{sub 3/2}{yields}{sup 4}I{sub 13/2}. In the case of crystalline samples manifolds, originating from the Stark effect, were measured for the {l_brace}{sup 2}H{sub 11/2}, {sup 4}S{sub 3/2}, {sup 4}F{sub 9/2}{r_brace}{yields}{sup 4}I{sub 15/2} and {sup 4}S{sub 3/2}{yields}{sup 4}I{sub 13/2} transitions. - Highlights: Black-Right-Pointing-Pointer The Cd{sub 2}V{sub 2}O{sub 7} has been fabricated in amorphous and crystalline phases. Black-Right-Pointing-Pointer The band gap of crystalline samples varied in the 2.49-2.41 eV range. Black-Right-Pointing-Pointer The absorption edge for the glasses had lower values with a minimum of 1.77 eV. Black-Right-Pointing-Pointer The {l_brace}{sup 2}H{sub 11/2}, {sup 4}S{sub 3/2}, {sup 4}F{sub 9/2}, {sup 4}I{sub 9/2}{r_brace}{yields}{sup 4}I{sub 15/2} and {sup 4}S{sub 3/2}{yields}{sup 4}I{sub 13/2,} were observed in PL.

Upgrading the seismic capacity of existing RC buildings using buckling restrained braces

Directory of Open Access Journals (Sweden)

Hamdy Abou-Elfath

2017-06-01

Full Text Available Many existing RC buildings do not meet the lateral strength requirements of current seismic codes and are vulnerable to significant damage or collapse in the event of future earthquakes. In the past few decades, buckling-restrained braces have become increasingly popular as a lateral force resisting system because of their capability of improving the strength, the stiffness and the energy absorbing capacity of structures. This study evaluates the seismic upgrading of a 6-story RC-building using single diagonal buckling restrained braces. Seismic evaluation in this study has been carried out by static pushover analysis and time history earthquake analysis. Ten ground motions with different PGA levels are used in the analysis. The mean plus one standard deviation values of the roof-drift ratio, the maximum story drift ratio, the brace ductility factors and the member strain responses are used as the basis for the seismic performance evaluations. The results obtained in this study indicate that strengthening of RC buildings with buckling restrained braces is an efficient technique as it significantly increases the PGA capacity of the RC buildings. The results also indicate the increase in the PGA capacity of the RC building with the increase in the amount of the braces.

Structural characterization of two new quaternary chalcogenides: CuCo{sub 2}InTe{sub 4} and CuNi{sub 2}InTe{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Delgado, Gerzon E.; Grima-Gallardo, Pedro; Nieves, Luis, E-mail: gerzon@ula.ve [Universidad de Los Andes, Merida (Venezuela, Bolivarian Republic of); Cabrera, Humberto [Centro Multidisciplinario de Ciencias, Instituto Venezolano de Investigaciones Cientificas (IVIC), Merida (Venezuela, Bolivarian Republic of); Glenn, Jennifer R.; Aitken, Jennifer A. [Department of Chemistry and Biochemistry, Duquesne University, Pittsburgh, PA (United States)

2016-11-15

The crystal structure of the chalcogenide compounds CuCo{sub 2}InTe{sub 4} and CuNi{sub 2}InTe{sub 4} , two new members of the I-II{sub 2}-III-VI{sub 4} family, were characterized by Rietveld refinement using X-ray powder diffraction data. Both materials crystallize in the tetragonal space group I4-bar 2m (No. 121), Z = 2, with a stannite-type structure, with the binaries CoTe and NiTe as secondary phases. (author)

Synthesis and evaluation of 1-[l brace]1-[5-(2'-[[sup 18]F]fluoroethyl)-2-thienyl]cyclohexyl[r brace]piperidine as a potential in vivo radioligand for the NMDA receptor-channel complex. [N-methyl-D-aspartate receptor

Energy Technology Data Exchange (ETDEWEB)

Orita, Kazuhiro; Sasaki, Shigeki; Maeda, Minoru [Kyushu Univ., Fukuoka (Japan). Faculty of Pharmaceutical Sciences; Hashimoto, Atsushi; Nishikawa, Toru [National Inst. of Neuroscience, Tokyo (Japan); Yugami, Tomoko; Umezu, Kohei [Mitsubishi Kasei Corp., Yokohama (Japan). Research Center

1993-10-01

1-[l brace]1-[5-(2'-[[sup 18]F]Fluoroethyl)-2-thienyl]cyclohexyl[r brace]piperidine ([sup 18]FE-TCP) was prepared a fluorine-substituted analogue of the potent NMDA receptor channel blocker, 1-[1-(2-thienyl)cyclohexyl]piperidine (TCP), by the mesylate displacement with [[sup 18]F]fluoride ion with isolated radiochemical yields of 6-12%, and the synthesis time including a two step HPLC purification was 120 min. The regional distribution in rat brain after i.v. injection of [sup 18]FE-TCP was heterogeneous and similar to the known distribution of phencyclidine recognition sites, with hippocampus-cerebellum, striatum-cerebellum and cerebral cortex-cerebellum concentration ratios of 2.08, 1.7 and 1.54, respectively, 15 min post-injection. Furthermore, this localized regional cerebral distribution was blocked by co-injection with the unlabelled FE-TCP or pretreatment with cis-2-hydroxymethyl-r-1-(N-piperidyl)-1-(2-thienyl)cyclohexane, with the greatest reductions seen in the hippocampus followed by the striatum and cerebral cortex. However, relatively low receptor binding affinity and high non-specific binding due to its high lipophilicity suggest that [sup 18]FE-TCP may not be a suitable radioligand for in vivo PET investigations of the NMDA receptor-channel complex. (Author).

A systematic review on the treatment of acute ankle sprain: brace versus other functional treatment types.

Science.gov (United States)

Kemler, Ellen; van de Port, Ingrid; Backx, Frank; van Dijk, C Niek

2011-03-01

ankle sprains should be considered. Further research should focus on economic evaluation and on different types of ankle brace, to examine the strengths and weaknesses of ankle braces for the treatment of acute ankle sprains. © 2011 Adis Data Information BV. All rights reserved.

An equivalent frequency approach for determining non-linear effects on pre-tensioned-cable cross-braced structures

Science.gov (United States)

Giaccu, Gian Felice

2018-05-01

Pre-tensioned cable braces are widely used as bracing systems in various structural typologies. This technology is fundamentally utilized for stiffening purposes in the case of steel and timber structures. The pre-stressing force imparted to the braces provides to the system a remarkable increment of stiffness. On the other hand, the pre-tensioning force in the braces must be properly calibrated in order to satisfactorily meet both serviceability and ultimate limit states. Dynamic properties of these systems are however affected by non-linear behavior due to potential slackening of the pre-tensioned brace. In the recent years the author has been working on a similar problem regarding the non-linear response of cables in cable-stayed bridges and braced structures. In the present paper a displacement-based approach is used to examine the non-linear behavior of a building system. The methodology operates through linearization and allows obtaining an equivalent linearized frequency to approximately characterize, mode by mode, the dynamic behavior of the system. The equivalent frequency depends on both the mechanical characteristics of the system, the pre-tensioning level assigned to the braces and a characteristic vibration amplitude. The proposed approach can be used as a simplified technique, capable of linearizing the response of structural systems, characterized by non-linearity induced by the slackening of pre-tensioned braces.

2D parallel interpenetration of [M2(bpp)4X4] [M, Fe(II)/Co(II); bpp, 4,4'-trimethylenedipyridine; X, SCN-, SeCN- and N3-] complexes: Pseudohalide-dependent conformation of bpp

International Nuclear Information System (INIS)

Manna, Subal Chandra; Jana, Atish Dipankar; Rosair, Georgina M.; Drew, Michael G.B.; Mostafa, Golam; Ray Chaudhuri, Nirmalendu

2008-01-01

Three coordination complexes of Co(II)/Fe(II) with 4,4'-trimethylenedipyridine (bpp) and pseudohalides (SCN - , SeCN - and N 3 - ) have been synthesized. The complexes have been characterized by X-ray single crystal structure determination. They are isomorphous having 2D layers in which two independent wavy nets display parallel interwoven structures. Pseudohalide binds metal centers through N terminal and occupies the trans axial positions of the octahedral metal coordination environment. Pseudohalide remains pendant on both sides of the polymeric layer and help the stacking through hydrogen bonding. The conformation of bpp in the interpenetrated nets is observed to be dependent on the choice of pseudohalide. - Graphical abstract: Complexes of [M 2 (bpp) 4 X 4 ] [M, Fe(II)/Co(II); bpp, 4,4'-trimethylenedipyridine; X, SCN - , SeCN - and N3 - ] have been synthesized. The structural analysis reveals undulated 2D network with (4,4) net topology adopting two different conformations of bpp alternately. Two such networks undergo parallel interpenetration. Pseudohalides are observed to help in stacking the interpenetrated nets through hydrogen bonding

Synthesis of fluorinated ReCl(4,4'-R2-2,2'-bipyridine)(CO)3 complexes and their photophysical characterization in CH3CN and supercritical CO2.

Science.gov (United States)

Doherty, Mark D; Grills, David C; Fujita, Etsuko

2009-03-02

Two new CO(2)-soluble rhenium(I) bipyridine complexes bearing the fluorinated alkyl ligands 4,4'-(C(6)F(13)CH(2)CH(2)CH(2))(2)-2,2'-bipyridine (1a), and 4,4'-(C(8)F(17)CH(2)CH(2)CH(2))(2)-2,2'-bipyridine (1b) have been prepared and their photophysical properties investigated in CH(3)CN and supercritical CO(2). Electrochemical and spectroscopic characterization of these complexes in CH(3)CN suggests that the three methylene units effectively insulate the bipyridyl rings and the rhenium center from the electron-withdrawing effect of the fluorinated alkyl chains. Reductive quenching of the metal-to-ligand charge-transfer excited states with triethylamine reveals quenching rate constants in supercritical CO(2) that are only 6 times slower than those in CH(3)CN.

Light Steel-Timber Frame with Composite and Plaster Bracing Panels

OpenAIRE

Scotta, Roberto; Trutalli, Davide; Fiorin, Laura; Pozza, Luca; Marchi, Luca; Stefani, Lorenzo  De

2015-01-01

The proposed light-frame structure comprises steel columns for vertical loads and an innovative bracing system to efficiently resist seismic actions. This seismic force resisting system consists of a light timber frame braced with an Oriented Strand Board (OSB) sheet and an external technoprene plaster-infilled slab. Steel brackets are used as foundation and floor connections. Experimental cyclic-loading tests were conduced to study the seismic response of two shear-wall specimens. A numerica...

Surface tension, density, and speed of sound for the ternary mixture {l_brace}diethyl carbonate + p-xylene + decane{r_brace}

Energy Technology Data Exchange (ETDEWEB)

Mosteiro, Laura; Casas, Lidia M. [Departamento de Fisica Aplicada, Facultad de Ciencias Experimentales, Universidad de Vigo, Lagoas Marcosende s/n, 36310 Vigo (Spain); Legido, Jose L. [Departamento de Fisica Aplicada, Facultad de Ciencias Experimentales, Universidad de Vigo, Lagoas Marcosende s/n, 36310 Vigo (Spain)], E-mail: xllegido@uvigo.es

2009-05-15

This paper reports the results of a new experimental study of thermophysical properties for the ternary mixture of {l_brace}diethyl carbonate + p-xylene + decane{r_brace}. Surface tension has been measured at 298.15 K and, density and speed of sound have been measured in the temperature range T = (288.15 to 308.15) K. Excess molar volumes, excess isentropic compressibilities, and surface tension deviations, have been calculated from experimental data. Surface tension deviations have been correlated with Cibulka equation and Nagata and Tamura equation was used for the other excess properties. Good accuracy has been obtained. These excess magnitudes are discussed qualitatively in terms of the nature and type of intermolecular interactions of the components involved.

Evaluating the ductility characteristics of self-centering buckling-restrained shape memory alloy braces

Science.gov (United States)

Abou-Elfath, Hamdy

2017-05-01

Recently, self-centering earthquake resistant systems have attracted attention because of their promising potential in controlling the residual drifts and reducing repair costs after earthquake events. Considerable portion of self-centering research is based on using short-segment superelastic shape memory alloy (SMA) braces as strengthening technique because of the lower modulus of elasticity of SMA in comparison with that of steel. The goal of this study is to investigate the ductility characteristics of these newly proposed short-segment SMA braces to evaluate their safety levels against fracture failures under earthquake loading. This goal has been achieved by selecting an appropriate seismic performance criterion for steel frames equipped with SMA braces, defining the level of strain capacity of SMA and calculating the strain demands in the SMA braces by conducting a series of pushover and earthquake time history analyzes on typical frame structure. The results obtained in this study indicated the inability of short-segment SMA designs to provide adequate ductility to the lateral resistant systems. An alternative approach is introduced by using hybrid steel-SMA braces that are capable of controlling the residual drifts and providing the structure with adequate lateral stiffness.

Ankle Bracing, Fatigue, and Time to Stabilization in Collegiate Volleyball Athletes

Science.gov (United States)

Shaw, Megan Y; Gribble, Phillip A; Frye, Jamie L

2008-01-01

Context: Fatigue has been shown to disrupt dynamic stability in healthy volunteers. It is not known if wearing prophylactic ankle supports can improve dynamic stability in fatigued athletes. Objective: To determine the type of ankle brace that may be more effective at providing dynamic stability after a jump-landing task during normal and fatigued conditions. Design: Two separate repeated-measures analyses of variance with 2 within-subjects factors (condition and time) were performed for each dependent variable. Setting: Research laboratory. Patients or Other Participants: Ten healthy female collegiate volleyball athletes participated (age  =  19.5 ± 1.27 years, height  =  179.07 ± 7.6 cm, mass  =  69.86 ± 5.42 kg). Intervention(s): Athletes participated in 3 separate testing sessions, applying a different bracing condition at each session: no brace (NB), Swede-O Universal lace-up ankle brace (AB), and Active Ankle brace (AA). Three trials of a jump-landing task were performed under each condition before and after induced functional fatigue. The jump-landing task consisted of a single-leg landing onto a force plate from a height equivalent to 50% of each participant's maximal jump height and from a starting position 70 cm from the center of the force plate. Main Outcome Measure(s): Time to stabilization in the anterior-posterior (APTTS) and medial-lateral (MLTTS) directions. Results: For APTTS, a condition-by-time interaction existed (F2,18  =  5.55, P  =  .013). For the AA condition, Tukey post hoc testing revealed faster pretest (2.734 ± 0.331 seconds) APTTS than posttest (3.817 ± 0.263 seconds). Post hoc testing also revealed that the AB condition provided faster APTTS (2.492 ± 0.271 seconds) than AA (3.817 ± 0.263 seconds) and NB (3.341 ± 0.339 seconds) conditions during posttesting. No statistically significant findings were associated with MLTTS. Conclusions: Fatigue increased APTTS for the AA condition. Because the

Inelastic behavior of cold-formed braced walls under monotonic and cyclic loading

Science.gov (United States)

Gerami, Mohsen; Lotfi, Mohsen; Nejat, Roya

2015-06-01

The ever-increasing need for housing generated the search for new and innovative building methods to increase speed and efficiency and enhance quality. One method is the use of light thin steel profiles as load-bearing elements having different solutions for interior and exterior cladding. Due to the increase in CFS construction in low-rise residential structures in the modern construction industry, there is an increased demand for performance inelastic analysis of CFS walls. In this study, the nonlinear behavior of cold-formed steel frames with various bracing arrangements including cross, chevron and k-shape straps was evaluated under cyclic and monotonic loading and using nonlinear finite element analysis methods. In total, 68 frames with different bracing arrangements and different ratios of dimensions were studied. Also, seismic parameters including resistance reduction factor, ductility and force reduction factor due to ductility were evaluated for all samples. On the other hand, the seismic response modification factor was calculated for these systems. It was concluded that the highest response modification factor would be obtained for walls with bilateral cross bracing systems with a value of 3.14. In all samples, on increasing the distance of straps from each other, shear strength increased and shear strength of the wall with bilateral bracing system was 60 % greater than that with lateral bracing system.

Seismic Response of Steel Braced Building Frame Considering Soil Structure Interaction (SSI): An Experimental Study

Science.gov (United States)

Hirave, Vivek; Kalyanshetti, Mahesh

2018-02-01

Conventional fixed-base analysis ignoring the effect of soil-flexibility may result in unsafe design. Therefore, to evaluate the realistic behavior of structure the soil structure interaction (SSI) effect shall be incorporated in the analysis. In seismic analysis, provision of bracing system is one of the important option for the structure to have sufficient strength with adequate stiffness to resist lateral forces. The different configuration of these bracing systems alters the response of buildings, and therefore, it is important to evaluate the most effective bracing systems in view point of stability against SSI effect. In present study, three RC building frames, G+3, G+5 and G+7 and their respective scaled down steel model with two types of steel bracing system incorporating the effect of soil flexibility is considered for experimental and analytical study. The analytical study is carried out using Elastic continuum approach and the experimental study is carried out using Shake Table. The influence of SSI on various seismic parameters is presented. The study reveals that, steel bracing system is beneficial to control SSI effect and it is observed that V bracing is more effective, in resisting seismic load considering SSI.

An experimental investigation on the ultimate strength of epoxy repaired braced partial infilled RC frames

Science.gov (United States)

Dubey, Shailendra Kumar Damodar; Kute, Sunil

2014-09-01

Due to earthquake, buildings are damaged partially or completely. Particularly structures with soft storey are mostly affected. In general, such damaged structures are repaired and reused. In this regard, an experimental investigation was planned and conducted on models of single-bay, single-storey of partial concrete infilled reinforced concrete (RC) frames up to collapse with corner, central and diagonal steel bracings. Such collapsed frames were repaired with epoxy resin and retested. The initiative was to identify the behaviour, extent of restored ultimate strength and deflection of epoxy-retrofitted frames in comparison to the braced RC frames. The performance of such frames has been considered only for lateral loads. In comparison to bare RC frames, epoxy repaired partial infilled frames have significant increase in the lateral load capacity. Central bracing is more effective than corner and diagonal bracing. For the same load, epoxy repaired frames have comparable deflection than similar braced frames.

A displacement-based approach for determining non-linear effects on pre-tensioned-cable cross-braced structures

Science.gov (United States)

Giaccu, Gian Felice; Caracoglia, Luca

2017-04-01

Pre-tensioned-cable bracing systems are widely employed in structural engineering to limit lateral deflections and stabilize structures. A suitable configuration of the pre-tensioned-cable bracing systems in a structure is an important issue since the internal force distribution, emerging from the interaction with the existing structure, significantly affects the structural dynamic behavior. The design, however, is often based on the intuition and the previous experience of the engineer. In recent years, the authors have been investigating the non-linear dynamic response of cable systems, installed on cable-stayed bridges, and in particular the so-called "cable-cross-tie systems" forming a cable network. The bracing cables (cross-ties) can exhibit slackening or snapping. Therefore, a non-linear unilateral model, combined with the taut-cable theory, is required to simulate the incipient slackening conditions in the stays. Capitalizing from this work on non-linear cable dynamics, this paper proposes a new approach to analyze, in laterally- braced truss structures, the unilateral effects and dynamic response accounting for the loss in the pre-tensioning force imparted to the bracing cables. This effect leads to non-linear vibration of the structure. In this preliminary study, the free vibrations of the structure are investigated by using the "Equivalent Linearization Method". A performance coefficient, a real positive number between 0.5 and 1.0, is defined and employed to monitor the relative reduction in the apparent stiffness of the braces during structural vibration, "mode by mode". It is shown that the system can exhibit alternate unilateral behavior of the cross-braces. A reduction of the performance coefficient close to fifty percent is observed in the braces when the initial pre-tensioning force is small. On the other hand the performance coefficient tends to one in the case of a high level of pre-stress. It is concluded that the performance coefficient may

Bracing can reduce high degree curves and improve aesthetics immediately after the end of growth. Final results of a retrospective case series.

Science.gov (United States)

Negrini, Stefano; Donzelli, Sabrina; Lusini, Monia; Zaina, Fabio

2012-01-01

Recently it has been shown that idiopathic scoliosis (IS) curves can be reduced with bracing, and it has been proposed that this could be useful in non-surgically treated high degree curves even after Risser 3. Moreover, bracing has been shown to be able to improve aesthetics, and this could be another reason to treat some patients with cosmetic needs. Our aim is to preliminary check if results can be obtained in IS patients after Risser 3. Design. Retrospective uncontrolled cohort study. Inclusion criteria. All IS patients treated on a voluntary basis for aesthetic reasons and/or for curve reduction; Risser 4-5 at start; end of treatment reached. Population. 34 females and 2 males, age 16.2±1.6 years, Cobb angle 27.6°±8.9°. Treatment. Lyon or SPoRT braces 18 to 24 hours/day, specific SEAS exercises, rapid weaning (2-3 hours every 6 months). Outcome criteria: SRS (unchanged; worsened over 6°; over 45° at the end of treatment; surgically treated), radiographic and clinical. Statistics. ANOVA and chi-test. The reported compliance during the 2.8 ± 1.1 treatment years was 95.1%, while residual growth was 0.9 ± 1.1 cm. Improvements were found in 39% of this cohort, (46% in curves over 30°). Only 1 patient progressed 6°. We found highly statistically significant reductions of maximal (-4.4°), thoracic (-6.0°) and thoracolumbar (-6.6°) curves. Statistically significant improvements were found for Aesthetic Index. Before 20 years of age, even in skeletally mature patients, it is possible to reach radiographic and aesthetic improvements, although not as good as during growth. Correction is based on bone growth, but ligaments and neuromuscular control of posture can also be involved.

Determination of brace forces caused by construction loads and wind loads during bridge construction.

Science.gov (United States)

2014-04-01

The first objective of this study was to develop procedures for determining bracing forces during bridge construction. : Numerical finite element models and analysis techniques were developed for evaluating brace forces induced by construction loads ...

Scaling analysis of [Fe(pyrazole)4]2[Nb(CN)8] molecular magnet

International Nuclear Information System (INIS)

Konieczny, P.; Pełka, R.; Zieliński, P.M.; Pratt, F.L.; Pinkowicz, D.; Sieklucka, B.; Wasiutyński, T.

2013-01-01

The critical behaviour of the three dimensional (3D) molecular magnet {[Fe II (pirazol) 4 ] 2 [Nb IV (CN) 8 ]·4H 2 O} n has been studied with the use of experimental techniques such as ac magnetometry and zero field μSR spectroscopy. The sample orders magnetically below T c =7.8 K. The measurements allowed to determine static exponents β, γ, and the dynamic exponent w. The resulting exponent values indicate that the studied system belongs to the universality class of the 3D Heisenberg model. - Highlights: • The critical behaviour of {[Fe II (pirazol) 4 ] 2 [Nb IV (CN) 8 ]∙4H 2 O} n has been studied. • Critical exponents β, γ, and w were obtained from ac magnetometry and ZF µSR data. • All obtained values of critical exponents are close to the 3D Heisenberg model

Light Steel-Timber Frame with Composite and Plaster Bracing Panels

Directory of Open Access Journals (Sweden)

Roberto Scotta

2015-11-01

Full Text Available The proposed light-frame structure comprises steel columns for vertical loads and an innovative bracing system to efficiently resist seismic actions. This seismic force resisting system consists of a light timber frame braced with an Oriented Strand Board (OSB sheet and an external technoprene plaster-infilled slab. Steel brackets are used as foundation and floor connections. Experimental cyclic-loading tests were conduced to study the seismic response of two shear-wall specimens. A numerical model was calibrated on experimental results and the dynamic non-linear behavior of a case-study building was assessed. Numerical results were then used to estimate the proper behavior factor value, according to European seismic codes. Obtained results demonstrate that this innovative system is suitable for the use in seismic-prone areas thanks to the high ductility and dissipative capacity achieved by the bracing system. This favorable behavior is mainly due to the fasteners and materials used and to the correct application of the capacity design approach.

Light Steel-Timber Frame with Composite and Plaster Bracing Panels.

Science.gov (United States)

Scotta, Roberto; Trutalli, Davide; Fiorin, Laura; Pozza, Luca; Marchi, Luca; De Stefani, Lorenzo

2015-11-03

The proposed light-frame structure comprises steel columns for vertical loads and an innovative bracing system to efficiently resist seismic actions. This seismic force resisting system consists of a light timber frame braced with an Oriented Strand Board (OSB) sheet and an external technoprene plaster-infilled slab. Steel brackets are used as foundation and floor connections. Experimental cyclic-loading tests were conduced to study the seismic response of two shear-wall specimens. A numerical model was calibrated on experimental results and the dynamic non-linear behavior of a case-study building was assessed. Numerical results were then used to estimate the proper behavior factor value, according to European seismic codes. Obtained results demonstrate that this innovative system is suitable for the use in seismic-prone areas thanks to the high ductility and dissipative capacity achieved by the bracing system. This favorable behavior is mainly due to the fasteners and materials used and to the correct application of the capacity design approach.

Effectiveness of Treatment of Idiopathic Scoliosis by SpineCor Dynamic Bracing with Special Physiotherapy Programme in SpineCor System.

Science.gov (United States)

Rożek, Karina; Potaczek, Tomasz; Zarzycka, Maja; Lipik, Ewa; Jasiewicz, Barbara

2016-10-28

The SpineCor dynamic brace for the treatment of idiopathic scoliosis is designed to maintain the correct position of the spine and a new movement strategy for 20 hours per day. The SpineCor exercise system intensifies and complements the brace treatment. This study evaluated the effectiveness of a comprehensive treatment of idiopathic scoliosis involving the SpineCor system. The study assessed a group of 40 patients (38 girls and 2 boys) with idiopathic scoliosis treated with the SpineCor brace. The average age at beginning of treatment was 13.1 yrs (10-15). Minimum treatment time was 18 months. 28 participants met the SRS criteria. Angles of the curve before and after bracing based on imaging studies were measured at the beginning and end of the treatment, analyzed and compared. Rehabilitation focused on teaching active corrective movement throughout the brace treatment. A control group was formed of 33 patients, including 21 meeting the SRS criteria, who used the SpineCor dynamic brace but did not participate in the associated exercise programme. Among patients from the exercise group who met the SRS criteria, 25% demonstrated reduced curve angles, 35.7% demonstrated curve progression and 39.3% showed stabilization (no change). Among patients meeting the SRS criteria from the control group, a decrease in curve angle was observed in 14.3% of the patients, curve progression in 57.1% and stabilization in 28.6%. 1. The addition of a dedicated physiotherapy programme to SpineCor dynamic bracing improves the chances of obtaining a positive outcome. 2. It is necessary to further analyse the course of the comprehensive treatment, also with regard to other types of braces and kinesiotherapy programmes.

An Experimental Investigation on the Ultimate Strength of Partially Infilled: Braced Steel Frames

Science.gov (United States)

Dubey, Shailendra Kumar Damodar; Kute, Sunil Y.

2017-12-01

Infilled walls are usually, considered as non-structural elements. However, these walls are effective in carrying lateral loads. In this regard, an experimental investigation was planned and conducted to study the effect of braced and partially infilled steel frames with cement mortar and concrete in comparison to the bare frames. All these frames were tested up to collapse and subjected only to horizontal loads to obtain an effective and possible solution for soft storey which are generally not infilled. In comparison to bare steel frames, partially infilled frames have an increase of lateral load capacity by 45-60%. Central bracing is more effective than that of the corner bracing. For the same load partially infilled frames have significantly less deflection than that of the bare frames. A reduced load factor is suggested for the design of soft storey columns with the partial infills. A mathematical model has been proposed to calculate the theoretical ultimate load for the braced, cement mortar and concrete partial infilled frames.

Human occupants in low-speed frontal sled tests: effects of pre-impact bracing on chest compression, reaction forces, and subject acceleration.

Science.gov (United States)

Kemper, Andrew R; Beeman, Stephanie M; Madigan, Michael L; Duma, Stefan M

2014-01-01

The purpose of this study was to investigate the effects of pre-impact bracing on the chest compression, reaction forces, and accelerations experienced by human occupants during low-speed frontal sled tests. A total of twenty low-speed frontal sled tests, ten low severity (∼2.5g, Δv=5 kph) and ten medium severity (∼5g, Δv=10 kph), were performed on five 50th-percentile male human volunteers. Each volunteer was exposed to two impulses at each severity, one relaxed and the other braced prior to the impulse. A 59-channel chestband, aligned at the nipple line, was used to quantify the chest contour and anterior-posterior sternum deflection. Three-axis accelerometer cubes were attached to the sternum, 7th cervical vertebra, and sacrum of each subject. In addition, three linear accelerometers and a three-axis angular rate sensor were mounted to a metal mouthpiece worn by each subject. Seatbelt tension load cells were attached to the retractor, shoulder, and lap portions of the standard three-point driver-side seatbelt. In addition, multi-axis load cells were mounted to each interface between the subject and the test buck to quantify reaction forces. For relaxed tests, the higher test severity resulted in significantly larger peak values for all resultant accelerations, all belt forces, and three resultant reaction forces (right foot, seatpan, and seatback). For braced tests, the higher test severity resulted in significantly larger peak values for all resultant accelerations, and two resultant reaction forces (right foot and seatpan). Bracing did not have a significant effect on the occupant accelerations during the low severity tests, but did result in a significant decrease in peak resultant sacrum linear acceleration during the medium severity tests. Bracing was also found to significantly reduce peak shoulder and retractor belt forces for both test severities, and peak lap belt force for the medium test severity. In contrast, bracing resulted in a significant

Treatment of the idiopathic scoliosis with brace and physiotherapy.

Science.gov (United States)

Hundozi-Hysenaj, Hajrije; Dallku, Iliriana Boshnjaku; Murtezani, Ardiana; Rrecaj, Shkurte

2009-01-01

Scoliosis is a three-dimensional deformation of the spine with a lateral curvature or deviation greater than 10 degrees and associated with vertebral rotation. Many conservative treatments are available for adolescents with idiopathic scoliosis, but the evidence for their effectiveness is still questioned. The objective of this study was to define the effectiveness of braces and individual physiotherapy for the comprehensive treatment of idiopathic scoliosis in adolescents. A retrospective study of 57 children with idiopathic thoracic dextroscoliosis with the magnitude of the thoracic curve between 20 degrees-35 degrees, treated in Orthopedic and Physiatrist Clinic as well as National Ortho-prosthetic Center within University Clinical Center of Kosova in Prishtina, during the period of 2003-2006. Inclusion of kinesitherapy in the comprehensive management of idiopathic scoliosis varied in the improvement of the muscle strength (satisfied and moderate) in almost 80% of the children while the correction of the curve was small in approximately 42.1% of cases. For children with idiopathic scoliosis, who require braces, an exercise program helps chest mobility, muscle strength, proper breathing flexibility in the spine, correct posture and keeps muscles in tone so that the transition period after brace removal is easier.

Evaluation of Seismic Behavior of Steel Braced Frames with Controlled Rocking System and Energy Dissipating Fuses

Directory of Open Access Journals (Sweden)

Hassan Amirzehni

2016-12-01

Full Text Available The self-centering rocking steel braced frames are new type of seismic lateral-force resisting systems that are developed with aim to limiting structural damages, minimizing residual drifts on systems and creating easy and inexpensive reconstruction capability, after sever earthquakes. In Steel braced frames with controlled rocking system, column bases on seismic resisting frame are not attached to the foundation and the frame allowed to rock freely. The task of restoring the rotated frame to its initial location is on post-tensioned cables, which attaches top of the frame to foundation. The design of post tensioned stands and braced frame members is such that during earthquakes they remain in elastic region. Seismic energy, dissipates by plastic deformations in replaceable elements on each rock of frame. In current research work, the seismic behavior of this type of lateral resisting systems is evaluated. The research conducted on a one bay steel braced frame with controlled rocking system that is analyzed using nonlinear dynamic time history analysis (NLTHA procedure. The frame is subjected to JMA-Kobe and Northridge ground motions records that are scaled to unit, 1.2 and 1.5 times of maximum considered earthquake (MCE ground motion level intensity. Extracted results show that seismic behavior of this type of lateral force resisting systems are so desirable even under MCE ground motion levels. The only anxiety is about occurring fatigue in post-tensioned strands that endangers overall stability of system.

Te(II)/Te(IV) Mediated C-N Bond Formation on 2,5-Diphenyltellurophene and a Reassignment of the Product from the Reaction of PhI(OAc)2 with 2 TMS-OTf.

Science.gov (United States)

Aprile, Antonino; Iversen, Kalon J; Wilson, David J D; Dutton, Jason L

2015-05-18

We report a novel C-H to C-N bond metathesis at the 3-position of 1,2-diphenyltellurophene via oxidation of the Te(II) center to Te(IV) using the I(III) oxidant [PhI(4-DMAP)2](2+). Spontaneous reduction of a transient Te(IV) coordination compound to Te(II) generates an electrophilic equivalent of 4-DMAP that substitutes at a C-H bond at the 3-position of the tellurophene. Theoretical and synthetic reaction pathway studies confirm that a Te(IV) coordination complex with 4-DMAP is an intermediate. In the course of these pathway studies, it was also found that the identity of the I(III) oxidant generated from PhI(OAc)2 and 2 TMS-OTf is PhI(OAc)(OTf) and not PhI(OTf)2, as had been previously thought.

Thermophysical properties and phase equilibria study of the binary systems {l_brace}N-hexylquinolinium bis(trifluoromethylsulfonyl)imide + aromatic hydrocarbons, or an alcohol{r_brace}

Energy Technology Data Exchange (ETDEWEB)

Domanska, Urszula, E-mail: ula@ch.pw.edu.p [Department of Physical Chemistry, Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw (Poland); Thermodynamic Research Unit, School of Chemical Engineering, University of KwaZulu-Natal, Howard College Campus, King George V Avenue, Durban 4001 (South Africa); Zawadzki, Maciej [Department of Physical Chemistry, Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw (Poland); Zwolinska, Magdalena [Department of Ergonomics, Laboratory of Thermal Loads, Central Institute for Labour Protection-National Research Institute, Czerniakowska 16, 00-701 Warsaw (Poland)

2011-05-15

Research highlights: We synthesized new ionic liquid, [HQuin][NTf{sub 2}] with low viscosity, and low density. We found high heat capacity, high enthalpy of melting and low melting temperature. HQuin][NTf{sub 2}] is proposed for possible use in the phase change materials (PCM). We examine phase equilibrium changes, SLE and LLE with hydrocarbons and alcohols. [HQuin][NTf{sub 2}] may be proposed as entrainer for the separation proceses. - Abstract: The new quinolinium ionic liquid has been synthesised as a continuation of our work with quinolinium-based ionic liquids (ILs). The work includes specific basic characterisation of synthesized compounds: N-hexylquinolinium bromide, [HQuin][Br] and N-hexylquinolinium bis{l_brace}(trifluoromethyl)sulfonyl{r_brace}imide [HQuin][NTf{sub 2}] by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure [HQuin][NTf{sub 2}] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity have been measured using a differential scanning microcalorimetry technique (DSC) and thermal analysis instrument (TA). Densities and viscosities were determined as a function of temperature. Phase equilibria for the binary systems: {l_brace}[HQuin][NTf{sub 2}]) + aromatic hydrocarbon (benzene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol){r_brace} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (270 to 320) K. For all the binary systems with benzene and alkylbenzenes, the eutectic diagrams were observed with immiscibility gap in the liquid phase beginning from (0.13 to 0.28) mole fraction of the IL with very high an upper critical solution temperature (UCST). For mixtures with alcohols, the complete miscibility was observed for 1-butanol and immiscibility with UCST in the liquid phase for the remaining alcohols. The typical

The Application of Buckling Reinforced Bracing and Shear Wall in Retrofitting of Existing Concrete Building

Directory of Open Access Journals (Sweden)

Mahdi Izadi

2015-06-01

Full Text Available Vulnerable buildings and their rehabilitation are important problems for earthquake regions. In recent decades the goal of building rehabilitation and strengthening has gained different rehabilitation systems. However, most of these strengthening techniques disturb the occupants, who must vacate the building during renovation. Several retrofitting techniques such as addition masonry infill wall, application of buckling restrained braces and local modification of components has been studied in order to improve the overall seismic performance of such buildings. In response to many of the practical issues and economic considerations, engineers use often convergent unbuckling steel bracing frames as the lateral load resisting system during an earthquake.This kind of bracings increases the hardness and strength of concrete structures.The aim of the present study is the evaluation and comparison of seismic performance and retrofitting of an existing 7-storeys concrete structure with buckling restrained bracings and shear walls by nonlinear static procedure (NSP and accordance with cod-361. The results show that the buckling restrained bracing, decreased drift to acceptable levels and Structure behaves on the life safety of performance level.

Dipropyl 3,6-diphenyl-1,2-dihydro-1,2,4,5-tetrazine-1,2-dicarboxylate.

Science.gov (United States)

Rao, Guo-Wu; Hu, Wei-Xiao

2003-05-01

The title compound, C(22)H(24)N(4)O(4), was prepared from propyl chloroformate and 3,6-diphenyl-1,2-dihydro-s-tetrazine. This reaction yields the title compound rather than dipropyl 3,6-diphenyl-1,4-dihydro-s-tetrazine-1,4-dicarboxylate. The 2,3-diazabutadiene group in the central six-membered ring is not planar; the C=N double-bond length is 1.285 (2) A, and the average N-N single-bond length is 1.401 (3) A, indicating a lack of conjugation. The ring has a twist conformation, in which adjacent N atoms lie +/- 0.3268 (17) A from the plane of the ring. The molecule has twofold crystallographic symmetry.

Seismic Response and Evaluation of SDOF Self-Centering Friction Damping Braces Subjected to Several Earthquake Ground Motions

Directory of Open Access Journals (Sweden)

Jong Wan Hu

2015-01-01

Full Text Available This paper mainly deals with seismic response and performance for self-centering friction damping braces (SFDBs subjected to several maximum- or design-leveled earthquake ground motions. The self-centering friction damping brace members consist of core recentering components fabricated with superelastic shape memory alloy wires and energy dissipation devices achieved through shear friction mechanism. As compared to the conventional brace members for use in the steel concentrically braced frame structure, these self-centering friction damping brace members make the best use of their representative characteristics to minimize residual deformations and to withstand earthquake loads without member replacement. The configuration and response mechanism of self-centering friction damping brace systems are firstly described in this study, and then parametric investigations are conducted through nonlinear time-history analyses performed on numerical single degree-of-freedom spring models. After observing analysis results, adequate design methodologies that optimally account for recentering capability and energy dissipation according to their comparative parameters are intended to be suggested in order to take advantage of energy capacity and to minimize residual deformation simultaneously.

Bracing in adult with scoliosis: experience in diagnosis and classification from a 15 year prospective study of 739 patients

Directory of Open Access Journals (Sweden)

Jean Claude de Mauroy

2016-10-01

Full Text Available Abstract Background Despite the frequency of adult scoliosis, very few publications concern the conservative orthopaedic treatments. The indications have not been defined to date. The experience of a department specialized in rigid bracing allows us to consolidate and clarify diagnosis and indications as well. Methods Individual observational prospective cohort study from a database started in 1998, with selection of all 739 adult scoliosis patients for which conservative orthopaedic treatment has been proposed to, even in case of drop-out. Scoliosis treated during adolescence and monitored in adulthood are included if a new brace is prescribed. A first descriptive study of the main parameters was performed: gender, age, Cobb angle. A tentative classification according to aetiology, age and angulation is proposed. Results 1 Descriptive Data: The Ratio Female/Male is 88 %, the mean age: 56.97 ± 15.82, the mean Cobb angle: 35.58 ± 17.35. The rate of non-adherent patients not wearing the brace is 17 % (but the plaster cast before bracing was routinely proposed at the time. 2 All patients can be grouped into five diagnoses, all statistically different, according to the age and the initial Cobb angle: Rotatory dislocation: 361 cases, age: 59.73 ± 13.52 (p = 0.05, (Cobb 39.08 ± 16.59 (p = 0.02* Instability and disc disease: 150 cases, age: 46.03 ± 15.49 (p = 0.00*, Cobb: 25.29 ± 12.29 (p = 0.00* Camptocormia: 68 cases, age: 69.78 ± 12.19 (p = 0.00*, Cobb: 38.09 ± 14.23 (p = 0.25 Kyphosis TL or T: 62 cases, age: 60.73 ± 15.51 (p = 0.07, Cobb: 43.34 ± (21.48 (p = 0.00* Disabling pain: 33 cases, age: 48.36 ± 13.73 (p = 0.02*, Cobb: 36.45 ± 25.21 (p = 0.78 Treatment after surgery and in the context of a lumbar stenosis and spondylolisthesis are independent groups. Despite the wide variety of etiologies, nearly 2/3 of patients have a discal pathology like

Supporting brace sizing in structures with added linear viscous fluid dampers: A filter design solution

OpenAIRE

Londono, J.M.; Wagg, D.; Neild, S.A.

2014-01-01

Viscous fluid dampers have proved to be effective in suppressing unwanted vibrations in a range of engineering structures. When dampers are fitted in a structure, a brace is typically used to attach them to the main structure. The stiffness of this brace can significantly alter the effectiveness of the damper, and in structures with multiple dampers, this can be a complex scenario to model. In this paper, we demonstrate that the effects of the brace compliance on the damper performance can be...

A Review of Influence of Various Types of Structural Bracing to the Structural Performance of Buildings

Science.gov (United States)

Razak, S. M.; Kong, T. C.; Zainol, N. Z.; Adnan, A.; Azimi, M.

2018-03-01

Excessive lateral drift can contribute significantly towards crack formation, leading to structural damage. The structural damage will in turn reduce the capacity of the structure and weaken it from the intended design capacity. Generally, lateral drift is more pronounced in higher and longer structure, such as high rise buildings and bridges. A typical method employed to control lateral drift is structural bracing, which works by increasing stiffness and stability of structure. This paper reviews the influence of various types of structural bracing to structural performance of buildings. The history of structural bracing is visited and the differences between numerous structural bracing in term of suitability to different types of buildings and loading, mechanisms, technical details, advantages and limitations, and the overall effect on the structural behaviour and performance are dissected. Proper and efficient structural bracing is pertinent for each high rise building as this will lead towards safer, sustainable and more economical buildings, which are cheaper to maintain throughout the life of the buildings in the future.

Delayed latency of peroneal reflex to sudden inversion with ankle taping or bracing.

Science.gov (United States)

Shima, N; Maeda, A; Hirohashi, K

2005-01-01

The purpose of the present study was to examine the effects of ankle taping and bracing based on the peroneal reflex in the hypermobile and normal ankle joints with and without history of ankle injury. Thirty-six ankle joints of 18 collegiate American football athletes with and without previous history of injury were studied. The angle of talar tilt (TT) was measured by stress radiograph for classifying normal (TT5 degrees ) ankles. They were tested with taping, bracing, and without any supports as a control. The latency of peroneus longus muscle was measured by a sudden inversion of 25 degrees using surface EMG signals. The results of the present study show no significant three-way Group (hypermobile or normal ankles) by History (previously injured or uninjured ankles) by Condition (control, taping, or bracing) interaction, while Condition main effect was significant (p0.05). In conclusion, ankle taping and bracing delayed the peroneal reflex latency not only for hypermobile ankles and/or injured ankle joints but also for intact ankle joints.

Cellular uptake of exogenous calcineurin B is dependent on TLR4/MD2/CD14 complexes, and CnB is an endogenous ligand of TLR4.

Science.gov (United States)

Yang, Jinju; Qin, Nannan; Zhang, Hongwei; Yang, Rui; Xiang, Benqiong; Wei, Qun

2016-04-19

Our previous research showed that recombinant calcineurin B (rhCnB) stimulates cytokine secretion by immune cells, probably through TLR4. Exogenous CnB can be incorporated into many different tumour cells in vitro, but the mode of uptake and receptors required remain unknown. Here, we report that exogenous CnB is taken up by cells in a time- and concentration-dependent manner via clathrin-dependent receptor-mediated internalization. Our findings further confirm that uptake is mediated by the TLR4/MD2 complex together with the co-receptor CD14. The MST results revealed a high affinity between CnB and the TLR4 receptor complex. No binding was detected between CnB and LPS. CnB inhibited the uptake of LPS, and LPS also inhibited the uptake of CnB. These results indicate that the uptake of exogenous CnB did not occur through LPS and that CnB was not a chaperone of LPS. Thus, we conclude that TLR4 receptor complexes were required for the recognition and internalization of exogenous CnB. CnB could be a potential endogenous ligand of TLR4 and function as an agonist of TLR4. These properties of CnB support its potential for development as an anti-cancer drug.

Redundancy Factors for the Seismic Design of Ductile Reinforced Concrete Chevron Braced Frames

Directory of Open Access Journals (Sweden)

Eber Alberto Godínez-Domínguez

Full Text Available Abstract In this paper the authors summarize the results of a study devoted to assess, using nonlinear static analyses, the impact of increasing the structural redundancy in ductile moment-resisting reinforced concrete concentric braced frames structures (RC-MRCBFs. Among the studied variables were the number of stories and the number of bays. Results obtained were compared with the currently proposed values in the Manual of Civil Structures (MOC-08, a model code of Mexico. The studied frames have 4, 8, 12 and 16-story with a story height h=3.5 m. and a fixed length L=12 m., where 1, 2, 3 or 4 bays have to be located. RC-MRCBFs were assumed to be located in soft soil conditions in Mexico City and were designed using a capacity design methodology adapted to general requirements of the seismic, reinforced concrete and steel guidelines of Mexican Codes. From the results obtained in this study it is possible to conclude that a different effect is observed in overstrength redundancy factors respect to ductility redundancy factors due to an increase of the bay number considered. Also, the structural redundancy factors obtained for this particular structural system varies respect to the currently proposed in MOC-08.

Comparison of in-and outpatients protocols for providence night time only bracing in AIS patients -- compliance and satisfaction

DEFF Research Database (Denmark)

Al-Aubaidi, Zaid Tj; Tropp, Hans; Pedersen, Niels W

2013-01-01

BACKGROUND: Skeletally immature patients diagnosed with adolescent idiopathic scoliosis (AIS) and a Cobb angle above 25degrees is usually treated with a brace. Standard protocols in many centers include hospitalisation for a few days for the purpose of brace adaptation and fitting. The aim...... of this study is to compare compliance and satisfaction in hospitalization and out patient clinic protocols, at the initiation phase of brace treatment.Materials and methodsTwenty-four consecutive patients with AIS were initiated with the Providence night time only brace at our department between October 2008...

Effect of laser irradiation on Ag4In12Sb56Te28

Science.gov (United States)

Chinnusamy, Rangasami

2018-04-01

Ag4In12Sb56Te28 has been synthesized by melt-quench method. Phase homogeneity, crystal structure and effect of laser irradiation have been investigated using X-ray diffraction (XRD) and Raman spectroscopy. Rietveld refinement of crystal structure revealed that Ag4In12Sb56Te28 is a multiphase system with AgIn3Te5, Sb8Te3 and Sb phases. Combined optical microscopy and Raman spectroscopy have been used to understand the distribution of different phases on the surface of the samples, which substantiated the results of Rietveld analysis. Interaction of 20 mW laser beam with samples has been investigated using Raman measurements. The results have shown that regions with large phase fraction of AgIn3Te5 become amorphous during laser-sample interaction, but the starting phase remains nearly same after the interaction. Regions with AgIn3Te5 and nearly equal or larger amount of Sb8Te3 have shown significant growth of α-Sb2O3 during and after laser-sample interaction. Regions rich in Sb have shown formation of AgIn3Te5 and growth of α-Sb2O3 during and after interaction. These observations have been explained based on the maximum temperature rise at different regions during laser-sample interaction.

Stride length: the impact on propulsion and bracing ground reaction force in overhand throwing.

Science.gov (United States)

Ramsey, Dan K; Crotin, Ryan L

2018-03-26

Propulsion and bracing ground reaction force (GRF) in overhand throwing are integral in propagating joint reaction kinetics and ball velocity, yet how stride length effects drive (hind) and stride (lead) leg GRF profiles remain unknown. Using a randomised crossover design, 19 pitchers (15 collegiate and 4 high school) were assigned to throw 2 simulated 80-pitch games at ±25% of their desired stride length. An integrated motion capture system with two force plates and radar gun tracked each throw. Vertical and anterior-posterior GRF was normalised then impulse was derived. Paired t-tests identified whether differences between conditions were significant. Late in single leg support, peak propulsion GRF was statistically greater for the drive leg with increased stride. Stride leg peak vertical GRF in braking occurred before acceleration with longer strides, but near ball release with shorter strides. Greater posterior shear GRF involving both legs demonstrated increased braking with longer strides. Conversely, decreased drive leg propulsion reduced both legs' braking effects with shorter strides. Results suggest an interconnection between normalised stride length and GRF application in propulsion and bracing. This work has shown stride length to be an important kinematic factor affecting the magnitude and timing of external forces acting upon the body.

K/sub 4/Si/sub 4/Te/sub 10/, the first tellurosilicate with adamantane-like Si/sub 4/Te/sub 10//sup 4 -/ anions

Energy Technology Data Exchange (ETDEWEB)

Eisenmann, B; Schaefer, H [Technische Hochschule Darmstadt (Germany, F.R.). Fachbereich Anorganische Chemie und Kernchemie

1982-08-01

The new compound K/sub 4/Si/sub 4/Te/sub 10/ crystallizes in the orthorhombic system (space group Pnma) with following constants: a = 2125.8(8) pm, b = 1200.5(7) pm, c = 1060.8(7) pm. The structure is characterized by SiTe/sub 4/ tetrahedra, connected by common corners to adamantane-like Si/sub 4/Te/sub 10//sup 4 -/ units.

Use of a shoulder abduction brace after arthroscopic rotator cuff repair: A study on gait performance and falls.

Science.gov (United States)

Sonoda, Yuma; Nishioka, Takashi; Nakajima, Ryo; Imai, Shinji; Vigers, Piers; Kawasaki, Taku

2018-04-01

Fall prevention is essential in patients after arthroscopic rotator cuff repair because of the high risk of re-rupture. However, there are no reports related to falls that occur during the early postoperative period, while the affected limb is immobilized. This study assessed gait performance and falls in patients using a shoulder abduction brace after arthroscopic rotator cuff repair. Prospective cohort and postoperative repeated measures. This study included 29 patients (mean age, 67.1 ± 7.4 years) who underwent arthroscopic rotator cuff repair followed by rehabilitation. The timed up and go test, Geriatric Depression Scale, and Falls Efficacy Scale were measured, and the numbers of falls were compared between those shoulder abduction brace users and patients who had undergone total hip or knee arthroplasty. In arthroscopic rotator cuff repair patients, there were significant improvements in timed up and go test and Geriatric Depression Scale, but no significant differences in Falls Efficacy Scale, between the second and fifth postoperative weeks ( p rotator cuff repair patients fell more often than patients with total hip arthroplasty or total knee arthroplasty during the same period. The findings suggest that rehabilitation in arthroscopic rotator cuff repair patients is beneficial, but decreased gait performance due to the immobilizing shoulder abduction brace can lead to falls. Clinical relevance Although rehabilitation helps motor function and mental health after arthroscopic rotator cuff repair, shoulder abduction brace use is associated with impaired gait performance, high Falls Efficacy Scale scores, and risk of falls, so awareness of risk factors including medications and lower limb dysfunctions is especially important after arthroscopic rotator cuff repair.

Forces exerted during exercises by patients with adolescent idiopathic scoliosis wearing fiberglass braces

OpenAIRE

Romano Michele; Carabalona Roberta; Petrilli Silvia; Sibilla Paolo; Negrini Stefano

2006-01-01

Abstract Objective To quantify and compare the forces exerted by scoliosis patients in fiberglass braces during exercises usually prescribed in departments where casts are made. The exercises are intended to increase corrective forces, activate muscles, stimulate ventilation and help the patient psychologically. Setting Outpatient care. Patients 17 consecutive adolescent patients wearing fiberglass brace for idiopathic scoliosis. Interventions Exercises (kyphotization, rotation, "escape from ...

Ferroelectric phase transition in hydrogen-bonded 2-aminopyridine phosphate (NC sub 4 H sub 4 NH sub 2)centre dot H sub 3 PO sub 4

CERN Document Server

Czapla, Z; Waskowska, A

2003-01-01

A new crystal of 2-aminopyridine phosphate (NC sub 4 H sub 4 NH sub 2)centre dot H sub 3 PO sub 4 has been grown and its x-ray structure and physical properties were studied. At room temperature the crystals are monoclinic, space group C2/c. The flat 2-aminopyridine cations are hydrogen bonded to the anionic [PO sub 4 ] groups. The interesting feature of the crystal structure is the three-dimensional network of hydrogen bonds including, among others, two strong, symmetrical O centre dot centre dot centre dot H, H centre dot centre dot centre dot O interactions with disordered proton locations. Symmetrically related PO sub 4 anions linked through these protons form infinite (PO sub 4) subinfinity chains along the crystal a-axis. The anomalies in the temperature dependence of the electric permittivity showed that the crystal undergoes ferroelectric phase transition at T sub c = 103.5 K. The spontaneous polarization takes place along the crystal a-axis, being parallel to the chains of the hydrogen-bonded PO sub ...

Raman spectra of the system TeCl4-SbCl5

International Nuclear Information System (INIS)

Brockner, W.; Demiray, A.F.

1980-01-01

Raman spectra of the solid and molten TeCl 4 . SbCl 5 addition compound and of some TeCl 4 -SbCl 5 mixtures have been recorded. Two modifications of the crystalline TeCl 4 -SbCl 5 compound have been found. The structure of the melt can be described by the equilibrium TeCl 3 + + SbCl 6 - reversible TeCl 4 + SbCl 5 lying on the left side. Mixtures with other stoichiometry contain the 1:1 adduct only and excess TeCl 4 or SbCl 5 , respectively. Such melts are built up by the ionic species TeCl 3 + and SbCl 6 - also and TeCl 4 or SbCl 5 according to stoichiometry. (author)

Clinical assessment of the efficacy of SpineCor brace in the correction of postural deformities in the course of idiopathic scoliosis.

Science.gov (United States)

Plewka, Barbara; Sibiński, Marcin; Synder, Marek; Witoński, Dariusz; Kołodziejczyk-Klimek, Katarzyna; Plewka, Michał

2013-03-26

The objective of the study was to perform a clinical, comparative assessment of the degree of postural deformities before and after the treatment of idiopathic scoliosis in patients treated with SpineCor brace compared to the control group. A group of 90 children with idiopathic scoliosis (including 74 girls) at the average age of 12.2 was subject to prospective observation. Average pre-treatment Cobb angle was 24.9° in the thoracic spine and 25.8° in the lumbar spine. The group actively treated with the SpineCor brace consisted of 45 children, while the control group consisted of the remaining 45 children with the natural course of the disease. Both groups did not differ significantly in terms of age, gender, height, body weight, Risser sign of skeletal maturity and baseline clinical and radiological parameters of scoliosis. Significant reduction of rib hump was observed upon 2-year SpineCor brace treatment (P=0.04) compared to the group treated by physiotherapy only (P=0.91). Similarly, improvement in lumbar prominence was observed in the actively treated group (P=0.009), with a trend towards worse results in the control group (P=0.07) In the group treated with the SpineCor brace, significant reduction in pectoral and hamstring muscle contractures as well as reduction in shoulder asymmetry and reduction in anterior and posterior vertical deviation were observed. Treatment using the SpineCor dynamic brace leads to a clinical improvement in posture, particularly to reduction in rib hump, lumbar prominence and muscular contractures.

Determination of ionization energies of CnN (n=4-12): Vacuum-ultraviolet (VUV) photoionization experiments and theoretical calculations

International Nuclear Information System (INIS)

Kostko, Oleg; Zhou, Jia; Sun, Bian Jian; Lie, Jie Shiuan; Chang, Agnes H.H.; Kaiser, Ralf I.; Ahmed, Musahid

2010-01-01

Results from single photon vacuum ultraviolet photoionization of astrophysically relevant CnN clusters, n = 4 - 12, in the photon energy range of 8.0 eV to 12.8 eV are presented. The experimental photoionization efficiency curves, combined with electronic structure calculations, provide improved ionization energies of the CnN species. A search through numerous nitrogen-terminated CnN isomers for n=4-9 indicates that the linear isomer has the lowest energy, and therefore should be the most abundant isomer in the molecular beam. Comparison with calculated results also shed light on the energetics of the linear CnN clusters, particularly in the trends of the even-carbon and the odd-carbon series. These results can help guide the search of potential astronomical observations of these neutral molecules together with their cations in highly ionized regions or regions with a high UV/VUV photon flux (ranging from the visible to VUV with flux maxima in the Lyman-a region) in the interstellar medium.

How to improve aesthetics in patients with Adolescent Idiopathic Scoliosis (AIS: a SPoRT brace treatment according to SOSORT management criteria

Directory of Open Access Journals (Sweden)

Fusco Claudia

2009-09-01

Full Text Available Abstract Background Aesthetics is a main goal of both conservative and surgical treatments in adolescent idiopathic scoliosis (AIS. Previously, we developed and validated a clinical scale - the Aesthetic Index (AI--in order to measure aesthetic impairment and changes during treatment. Aim To verify the efficacy of bracing on aesthetics in AIS. Study Design Prospective Cohort Study. Population Thirty-four consecutive patients, age 13.2 ± 3.7, initial Cobb Angle 32 ± 12°, ATR 10 ± 4° Bunnel, 11 males. Methods Patients with AI scores of at least 5/6 were included. Each of them had a brace prescription (18 to 23 hours per day, according to the SPoRT concept. AI was measured again after six months and at the end of treatment, and then the pre- and post-treatment scores compared. The Wilcoxon test was performed. Results Twenty-nine patients out of the 34 included completed the treatment and had six-month and final results; four patients were lost during the treatment, and one was fused. At baseline, median AI was 6 (95% IC 5-6 but the score decreased to 3 (95% IC 0-5; p Conclusion Aesthetics can be improved in a clinically significant way when the brace treatment is performed according to the SPoRT concept and by following the SOSORT management criteria. This is a relevant result for patients and a major goal of scoliosis treatment, be it conservative or surgical. The use of a more sensitive tool like TRACE could more easily detect the clinical changes; nevertheless, AI proved sensible enough that its use in everyday clinical practice can be suggested.

Ankle brace attenuates the medial-lateral ground reaction force during basketball rebound jump

Directory of Open Access Journals (Sweden)

Alex Castro

Full Text Available ABSTRACT Introduction: The jump landing is the leading cause for ankle injuries in basketball. It has been shown that the use of ankle brace is effective to prevent these injuries by increasing the mechanical stability of the ankle at the initial contact of the foot with the ground. Objective: To investigate the effects of ankle brace on the ground reaction force (GRF during the simulation of a basketball rebound jump. Method: Eleven young male basketball players randomly carried out a simulated basketball rebound jump under two conditions, with and without ankle brace (lace-up. Dynamic parameters of vertical GRF (take-off and landing vertical peaks, time to take-off and landing vertical peaks, take-off impulse peak, impulse at 50 milliseconds of landing, and jump height and medial-lateral (take-off and landing medial-lateral peaks, and time to reach medial-lateral peaks at take-off and landing were recorded by force platform during rebound jumps in each tested condition. The comparisons between the tested conditions were performed by paired t test (P0.05. Conclusion: The use of ankle brace during basketball rebound jumps attenuates the magnitude of medial-lateral GRF on the landing phase, without changing the vertical GRF. This finding indicates that the use of brace increases the medial-lateral mechanical protection by decreasing the shear force exerted on the athlete’s body without change the application of propulsive forces in the take-off and the impact absorption quality in the landing during the basketball rebound jump.

Rehabilitation of adolescent idiopathic scoliosis: results of exercises and bracing from a series of clinical studies. Europa Medicophysica-SIMFER 2007 Award Winner.

Science.gov (United States)

Negrini, S; Atanasio, S; Zaina, F; Romano, M

2008-06-01

Rehabilitation of adolescent idiopathic scoliosis (AIS) requires a careful choice from among the possible treatments, such as bracing and exercises, according to the patient's needs. According to the literature, there is little evidence regarding the efficacy of these rehabilitation instruments. During the past few years, a full series of studies has been carried out to investigate their efficacy. The aim of this paper was to summarize all these results. Three systematic reviews (two on exercises and one on manual therapy), and four cohort prospective studies were performed. The prospective studies included two trials with a prospective control group on exercises (one to avoid bracing and one in preparation to bracing) and two trials with retrospective control group on a new brace developed by the Authors (Sforzesco brace and SPoRT concept of correction versus Lyon brace and Risser cast). Results show that in literature there is proof of level 1b on exercises but no studies on manual therapy. High quality exercises like Scientific Exercises Approach to Scoliosis (SEAS) have more efficacy than usual physiotherapy, significantly reducing brace prescription in one year from 25% of cases to 6%. Moreover, such exercises help to obtain the best results in bracing first correction. The Sforzesco brace has proved to have more efficacy than the Lyon brace, whereas it has the same efficacy--but reduced side effects and impact on quality of life--than the Risser brace. With an efficient management of data collection, it is possible to develop a set of studies aimed at verifying the efficacy of clinical daily rehabilitation approaches.

Thermoelectric properties of In{sub 0.2}Co{sub 4}Sb{sub 12} skutterudites with embedded PbTe or ZnO nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Chubilleau, C.; Lenoir, B.; Candolfi, C.; Masschelein, P. [Université de Lorraine, CNRS, UMR 7198, Institut Jean Lamour, Parc de Saurupt, 54011 Nancy (France); Dauscher, A., E-mail: anne.dauscher@univ-lorraine.fr [Université de Lorraine, CNRS, UMR 7198, Institut Jean Lamour, Parc de Saurupt, 54011 Nancy (France); Guilmeau, E. [Laboratoire CRISMAT, UMR 6508, 6 boulevard Maréchal Juin, 14050 Caen Cedex (France); Godart, C. [ICMPE-CMTR, CNRS-UMR 7182, 2-8 rue H. Dunant, 94320 Thiais (France)

2014-03-15

Highlights: • Fabrication of nanostructured skutterudites ZnO or PbTe/In{sub 0.2}Co{sub 4}Sb{sub 12.} • Thermal conductivity modeling accounts for experimental results. • Greater lattice thermal conductivity decrease in In{sub 0.2}Co{sub 4}Sb{sub 12} than in CoSb{sub 3}. • A max ZT of 1.05 is obtained at 700 K in a 2 wt% ZnO-containing sample. -- Abstract: Transport properties of the skutterudite compound In{sub 0.2}Co{sub 4}Sb{sub 12} containing ZnO or PbTe nano-sized particles (2–12 wt%) were investigated by means of electrical resistivity, thermopower and thermal conductivity between 5 and 800 K. The composite powders were prepared by freeze-drying the nanoparticles with micron-sized In{sub 0.2}Co{sub 4}Sb{sub 12} powders. Densification was achieved by spark plasma sintering. All composites were characterized by X-ray powder diffraction and scanning electron microscopy. All the transport coefficients show similar temperature dependences suggesting little influence of the nature, semiconducting or insulating, of the nanoparticles. Both the electrical and the thermal conductivities decrease with increasing the PbTe or ZnO content. The impact of ZnO and PbTe on the thermal conductivity was modelled based on the Debye model taking into account a relaxation time constant reflecting phonon scattering by spherical nanoparticles. A maximum dimensionless figure of merit ZT of 1.05 at 700 K was achieved in a sample containing 2 wt% ZnO, a value quite similar to that of the reference In{sub 0.2}Co{sub 4}Sb{sub 12} compound.

A Conceptual Design and Structural Analysis for ITER Mid-plane Brace Tools

Energy Technology Data Exchange (ETDEWEB)

Nam, Kyoung O; Park, Hyun Ki; Kim, Dong Jin [National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Jae Hyuk; Kim, Kyung kyu [SFA Engineering Corp., Changwon (Korea, Republic of); Im, Kihak; Robert, Shaw [ITER Organization, St Paul lez Durance Cedex (France)

2010-10-15

The ITER, International Thermonuclear Experimental Reactor, Tokamak machine is mainly composed of 9 vacuum vessel (VV)/toroidal field coils (TFCs)/vacuum vessel thermal shields (VVTS) 40 .deg. sectors. Each VV/TFCs/VVTS 40 .deg. sector is made up of one 40 .deg. VV, two 20 .deg. TFCs and associated VVTS segments. The ITER Tokamak assembly tools are purpose-built tools to assemble the ITER Tokamak machine which includes the cryostat and the components contained therein. Based on the design description document prepared by the IO (ITER international organization), Korea has carried out the conceptual design of assembly tools with IO cooperation. The 40 .deg. sector assemblies attached mid-plane brace tools sub-assembled at assembly hall are transferred to Tokamak hall using the lifting tool operated by Tokamak main cranes. The sector sub-assembly tools are composed of the upending tool, the sector sub-assembly tool, the sector lifting tool and the vacuum vessel support and mid-plane brace tools. The mid-plane brace tool is assembled to inner surface of VV and TFCs in phase of sector sub-assembly after completion of all sector components. VV, TFC and VVTS are separated fully before completion of 9 sectors at Tokamak in-pit. In this paper the mid-plane brace tools is introduced about function, structure and status of research and development are also described

Triosmium cluster compounds containing isocyanide and hydride ligands. Crystal and molecular structures of (μ-H)(H)Os3(CO)10(CN-t-C4H9) and (μ-H)2Os3(CO)9(CN-t-C4H9)

International Nuclear Information System (INIS)

Adams, R.D.; Golembski, N.M.

1979-01-01

The structures of the compounds (μ-H)(H)Os 3 (CO) 10 (CN-t-C 4 H 9 ) and (μ-H) 2 Os 3 (CO) 9 (CN-t-C 4 H 9 ) have been revealed by x-ray crystallographic techniques. For (μ-H)(H)Os 3 (CO) 10 (CN-t-C 4 H 9 ): a = 9.064 (3), b = 12.225 (3), c = 20.364 (4) A; β = 98.73 (3) 0 ; space group P2 1 /c[C/sub 2h/ 5 ], No. 14; Z = 4; d/sub calcd/ = 2.79 g cm -3 . This compound contains a triangular cluster of three osmium atoms; Os(1)--Os(2) = 2.930 (1) A, Os(1)--Os(3) = 2.876 (1) A, and Os(2)--Os(3) = 3.000 (1) A. There are ten linear terminal carbonyl groups and one linear terminal isocyanide ligand which occupies an axial coordination site. The hydrogen atoms were not observed crystallographically, but their positions are strongly inferred from considerations of molecular geometry. For (μ-H) 2 Os 3 (CO) 9 (CN-t-C 4 H 9 ): a = 15.220 (8), b = 12.093 (6), c = 23.454 (5) A; space group Pbcn [D/sub 2h/ 14 ], No. 60; Z = 8; d/sub calcd/ = 2.79 g cm -3 . The compound is analogous to the parent carbonyl (μ-H) 2 Os 3 (CO) 10 and has two normal and one short osmium--osmium bonds: Os(1)--Os(2) = 2.827 (1) A, Os(1)--Os(3) = 2.828 (1) A, Os(2)--Os(3) = 2.691 (1) A. The isocyanide ligand resides in an equatorial coordination site on osmium Os(2). The hydrogen atoms were not observed but are believed to occupy bridging positions as in the parent carbonyl complex. 2 figures, 7 tables

Behavior of concentrically loaded CFT braces connections

Directory of Open Access Journals (Sweden)

Maha M. Hassan

2014-03-01

Full Text Available Concrete filled tubes (CFTs composite columns have many economical and esthetic advantages, but the behavior of their connections is complicated. Through this study, it is aimed to investigate the performance and behavior of different connection configurations between concrete filled steel tube columns and bracing diagonals through an experimental program. The study included 12 connection subassemblies consisting of a fixed length steel tube and gusset plate connected to the tube end with different details tested under half cyclic loading. A notable effect was observed on the behavior of the connections due to its detailing changes with respect to capacity, failure mode, ductility, and stress distribution.

SUPER-CAPACITOR APPLICATION IN ELECTRICAL POWER CABLE TESTING FACILITIES IN THERMAL ENDURANCE AND MECHANICAL BRACING TESTS

Directory of Open Access Journals (Sweden)

I. V. Oleksyuk

2015-01-01

Full Text Available The current-carrying cores of the electrical power cables should be resistant to effects of short-circuit currents whose values depend on the material of the core, its cross-sectional area, cable insulation properties, environment temperature, and the duration of the short-circuit current flow (1 and 3–4 sec. when tested for thermal endurance and mechanical bracing. The facilities for testing the 10 kV aluminum core cables with short-circuit current shall provide mechanical-bracing current 56,82 kA and thermal endurance current 11,16 kA. Although capacitors provide such values of the testing currents to the best advantage, utilizing conventional capacitor-units will involve large expenditures for erecting and  running a separate building. It is expedient to apply super-capacitors qua the electric power supply for testing facilities, as they are capacitors with double-electrical layer and involve the current values of tens of kilo-amperes.The insulation voltage during short-circuit current testing being not-standardized, it is not banned to apply voltages less than 10 kV when performing short-circuit thermal endurance and mechanical bracing tests for electrical power cables of 10 kV. The super-capacitor voltage variation-in-time graph consists of two regions: capacitive and resistive. The capacitive part corresponds to the voltage change consequent on the energy change in the super-capacitors. The resistive part shows the voltage variation due to the active resistance presence in the super-capacitor.The author offers the algorithm determining the number of super capacitors requisite for testing 10 kV-electrical power cables with short-circuit currents for thermal endurance and mechanical bracing. The paper shows that installation of super-capacitors in the facilities testing the cables with short-circuit currents reduces the area needed for the super-capacitors in comparison with conventional capacitors more than by one order of magnitude.

The predictive value of the extensor grip test for the effectiveness of bracing for tennis elbow

NARCIS (Netherlands)

Struijs, Peter A. A.; Assendelft, Willem J. J.; Kerkhoffs, Gino M. M. J.; Souer, Sebastiaan; van Dijk, C. Niek

2005-01-01

Background: Tennis elbow is a common complaint. Several treatment strategies, such as corticosteroid injections and physical therapy and braces, have been described. Hypothesis: The extensor grip test has predictive value in assessing the effectiveness of bracing in tennis elbow. Study Design:

Effect of a patella support brace on myoelectric activity of knee joint muscles during single leg landing

Directory of Open Access Journals (Sweden)

Fatemeh Salariesker

2013-06-01

Full Text Available Introduction: Patellfemoral pain syndrome is one of the most common knee joint problems that affect athletes and non-athletes. Knee brace is often used as a treatment method for patellar realignment. The aim of the present study was to determine the effects of a patella support brace on myoelectric activity of selected knee muscles during single leg landing in healthy females. Materials and Methods: 19 healthy female students (Mean age: 23.6±1.98 years, height: 163.5±5.88 cm, weight: 62.3±3.6 kg participated in this study. Myoelectric activity of biceps femoris, semitendinosus, vastus medialis and vastus lateralis were collected during single leg landing in with and without using the patella support brace conditions.Results: Use of the patella support brace had no significant effect on myoelectric activity for the semitendinosus (p=0.668, vastus medialis (VM (p=0.915 and vastus lateralis (VL (P=0.134, while myoelectric activity for biceps femoris (p=0.005 and ratio of VM/VL myoelectric activity significantly increased (p=0.045. Conclusion: Our results revealed that biceps femoris activity and vastus medialis/vastus lateralis ratio increased after using patella support brace during single leg landing. Further studies on kinematic and kinetic variables are needed to describe these changes in muscular activity when using the patella support brace.

Structural analysis: Flexible receiver yoke brace for the 241SY101 mixer pump

International Nuclear Information System (INIS)

Jones, K.M.

1994-01-01

This report documents the structural analysis of the flexible-receiver yoke brace that will be used to maintain the mixer pump lifting yoke in a vertical position during the removal of the mixer pump from waste tank 241SY101. During the removal process, the crane is connected to a lifting yoke which is attached to the lifting on the mounting flange of the mixer pump. The pump then can be lifted from the tank. At one point in the removal procedure, the crane will be disconnected from the lifting yoke. At this time, it is possible for the lifting yoke to rotate around the pinned connection between it and the pump if it is subjected to a horizontal load. To prevent the rotation of the lifting yoke, the yoke brace was designed to maintain the yoke in a vertical position while it is disconnected from the crane. This analysis addressed the adequacy of the yoke brace to provide support for the lifting yoke during high winds and a seismic event. The results of this analysis show that, when subjected to a combined design wind and seismic load, the yoke brace design is acceptable to maintain the lifting yoke in a vertical position when the yoke is disconnected from the crane

Functional knee brace use effect on peak vertical ground reaction forces during drop jump landing.

Science.gov (United States)

Rishiraj, Neetu; Taunton, Jack E; Lloyd-Smith, Robert; Regan, William; Niven, Brian; Woollard, Robert

2012-12-01

The aim of the study was to investigate the landing strategies used by non-injured athletes while wearing functional knee braces (FKB, BR condition) during a drop jump task compared with non-injured, non-braced (NBR condition) subjects and also to ascertain whether accommodation to a FKB was possible by non-injured BR subjects. Twenty-three healthy male provincial and national basketball and field hockey athletes (age, 19.4 ± 3.0 years) were tested. Each subject was provided with a custom-fitted FKB. Five NBR testing sessions were performed over 3 days followed by five BR testing sessions also over 3 days, for a total of 17.5 h of testing per condition. Each subject performed eight trials of the drop jump task during each testing session per condition. Single-leg peak vertical ground reaction forces (PVGRF) and the time to PVGRF were recorded for each NBR and BR trail. The BR group mean PVGRF at landing was significantly lower (1,628 ± 405 N, 2.1 ± 0.5 BW versus 1,715 ± 403 N, 2.2 ± 0.5 BW, F (1,22) = 6.83, P = 0.01) compared with NBR subjects, respectively. The group mean time to PVGRF was not statistically longer during the BR condition (F (1,22) = 0.967, P = 0.3). Further, an accommodation trend was noted as percent performance difference decreased with continued FKB use. The significantly lower group mean PVGRF while using a FKB could keep traumatic forces from reaching the ACL until the active neuromuscular restraints are activated to provide protection to the knee joint ligaments. Also, accommodation to FKB is possible after approximately 14.0 h of brace use. The results of this paper will assist clinicians in providing information to their patients regarding a FKB ability to offer protection to an ACL-deficient knee or to address concerns about early muscle fatigue, energy expenditure, heart rate, and decrease in performance level. Prospective study, Level I.

Mechanical stability of the subtalar joint after lateral ligament sectioning and ankle brace application: a biomechanical experimental study.

Science.gov (United States)

Kamiya, Tomoaki; Kura, Hideji; Suzuki, Daisuke; Uchiyama, Eiichi; Fujimiya, Mineko; Yamashita, Toshihiko

2009-12-01

The roles of each ligament supporting the subtalar joint have not been clarified despite several biomechanical studies. The effects of ankle braces on subtalar instability have not been shown. The ankle brace has a partial effect on restricting excessive motion of the subtalar joint. Controlled laboratory study. Ten normal fresh-frozen cadaveric specimens were used. The angular motions of the talus were measured via a magnetic tracking system. The specimens were tested while inversion and eversion forces, as well as internal and external rotation torques, were applied. The calcaneofibular ligament, cervical ligament, and interosseous talocalcaneal ligament were sectioned sequentially, and the roles of each ligament, as well as the stabilizing effects of the ankle brace, were examined. Complete sectioning of the ligaments increased the angle between the talus and calcaneus in the frontal plane to 51.7 degrees + or - 11.8 degrees compared with 35.7 degrees + or - 6.0 degrees in the intact state when inversion force was applied. There was a statistically significant difference in the angles between complete sectioning of the ligaments and after application of the brace (34.1 degrees + or - 7.3 degrees ) when inversion force was applied. On the other hand, significant differences in subtalar rotation were not found between complete sectioning of the ligaments and application of the brace when internal and external rotational torques were applied. The ankle brace limited inversion of the subtalar joint, but it did not restrict motion after application of internal or external rotational torques. In cases of severe ankle sprains involving the calcaneofibular ligament, cervical ligament, and interosseous talocalcaneal ligament injuries, application of an ankle brace might be less effective in limiting internal-external rotational instabilities than in cases of inversion instabilities in the subtalar joint. An improvement in the design of the brace is needed to restore

An Experimental Study on Hybrid Noncompression CF Bracing and GF Sheet Wrapping Reinforcement Method to Restore Damaged RC Structures

Directory of Open Access Journals (Sweden)

Kang Seok Lee

2015-01-01

Full Text Available We describe a novel technique for restoration of reinforced concrete (RC structures that have sustained damage during an earthquake. The reinforcement scheme described here is a hybrid seismic retrofitting technique that combines noncompression X-bracing using CF with externally bonded GF sheets to strengthen RC structures that have sustained damage following an earthquake. The GF sheet is used to improve the ductility of columns, and the noncompression CF X-bracing system, which consists of CF bracing and anchors to replace the conventional steel bracing and bolt connections, is used to increase the lateral strength of the framing system. We report seismic restoration capacity, which enables reuse of the damaged RC frames via the hybrid CF X-bracing and GF sheet wrapping system. Cyclic loading tests were carried out to investigate hysteresis of the lateral load-drift relations, as well as the ductility. The GF sheet significantly improved the ductility of columns, resulting in a change in failure mode. The strengthening effect of conventional CF sheets used in columns is not sufficient with respect to lateral strength and stiffness. However, this study results in a significant increase in the strength of the structure due to the use of CF X-bracing and inhibited buckling failure of the bracing. This result can be exploited to develop guidelines for the application of the reinforcement system to restore damaged RC structures.

Thermal Behavior of Cylindrical Buckling Restrained Braces at Elevated Temperatures

Directory of Open Access Journals (Sweden)

Elnaz Talebi

2014-01-01

Full Text Available The primary focus of this investigation was to analyze sequentially coupled nonlinear thermal stress, using a three-dimensional model. It was meant to shed light on the behavior of Buckling Restraint Brace (BRB elements with circular cross section, at elevated temperature. Such bracing systems were comprised of a cylindrical steel core encased in a strong concrete-filled steel hollow casing. A debonding agent was rubbed on the core’s surface to avoid shear stress transition to the restraining system. The numerical model was verified by the analytical solutions developed by the other researchers. Performance of BRB system under seismic loading at ambient temperature has been well documented. However, its performance in case of fire has yet to be explored. This study showed that the failure of brace may be attributed to material strength reduction and high compressive forces, both due to temperature rise. Furthermore, limiting temperatures in the linear behavior of steel casing and concrete in BRB element for both numerical and analytical simulations were about 196°C and 225°C, respectively. Finally it is concluded that the performance of BRB at elevated temperatures was the same as that seen at room temperature; that is, the steel core yields prior to the restraining system.

Thermal behavior of cylindrical buckling restrained braces at elevated temperatures.

Science.gov (United States)

Talebi, Elnaz; Tahir, Mahmood Md; Zahmatkesh, Farshad; Yasreen, Airil; Mirza, Jahangir

2014-01-01

The primary focus of this investigation was to analyze sequentially coupled nonlinear thermal stress, using a three-dimensional model. It was meant to shed light on the behavior of Buckling Restraint Brace (BRB) elements with circular cross section, at elevated temperature. Such bracing systems were comprised of a cylindrical steel core encased in a strong concrete-filled steel hollow casing. A debonding agent was rubbed on the core's surface to avoid shear stress transition to the restraining system. The numerical model was verified by the analytical solutions developed by the other researchers. Performance of BRB system under seismic loading at ambient temperature has been well documented. However, its performance in case of fire has yet to be explored. This study showed that the failure of brace may be attributed to material strength reduction and high compressive forces, both due to temperature rise. Furthermore, limiting temperatures in the linear behavior of steel casing and concrete in BRB element for both numerical and analytical simulations were about 196°C and 225°C, respectively. Finally it is concluded that the performance of BRB at elevated temperatures was the same as that seen at room temperature; that is, the steel core yields prior to the restraining system.

Characterization of NCAM expression and function in BT4C and BT4Cn glioma cells

DEFF Research Database (Denmark)

Andersson, A M; Moran, N; Gaardsvoll, H

1991-01-01

The neural cell adhesion molecule, NCAM, plays an important role in cell-cell adhesion. Therefore, we have studied NCAM expression in the glioma cell lines BT4C and BT4Cn. We demonstrate that the 2 cell lines differ in their metastatic ability; while BT4C cells have a very low capacity for produc...

Octacyanoniobate(IV)-based molecular magnets revealing 3D long-range order

Energy Technology Data Exchange (ETDEWEB)

Pelka, R; Balanda, M [Institute of Physics PAN, Radzikowskiego 152, 31-342, Krakow (Poland); Pinkowicz, D; Drath, O; Nitek, W; Sieklucka, B [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland); Rams, M; Majcher, A, E-mail: robert.pelka@ifj.edu.pl [Institute of Physics, Jagiellonian University, Reymonta 4, 30-059 Krakow (Poland)

2011-07-06

Isostructural series of chemical formula {l_brace}[M{sup II}(pirazol){sub 4}]{sub 2}[Nb{sup IV}(CN){sub 8}]{center_dot} 4H{sub 2}O{r_brace}{sub n} (M{sup II} = Mn (1), Fe (2), Co (3), Ni (4)) has been obtained by the self-assembly technique. Its unique crystallographic structure consists in the formation of a 3D extended network of magnetic centers braced by geometrically identical cyanido bridges. Magnetic measurements reveal the transitions to the 3D order at temperatures 23.7, 8.3, 5.9, 13.4 K for 1, 2, 3, and 4, respectively. The character of order is demonstrated to be ferrimagnetic for 1 and 2 and ferromagnetic for 3 and 4. The mean-field approach is used to determine the corresponding exchange coupling constants. The observed interactions are discussed within the magnetic orbital model.

Syntheses, crystal structures, and characterization of two new Tl{sup +}-Cu{sup 2+}-Te{sup 6+} oxides: Tl{sub 4}CuTeO{sub 6} and Tl{sub 6}CuTe{sub 2}O{sub 10}

Energy Technology Data Exchange (ETDEWEB)

Yeon, Jeongho; Kim, Sang-Hwan [Department of Chemistry, University of Houston, 136 Fleming Building, Houston, TX 77204-5003 (United States); Green, Mark A. [Department of Materials Science and Engineering, University of Maryland, College Park, MD, 20742-2115 and NIST Center for Neutron Research, National Institute of Standard and Technology, 100 Bureau Drive, Gaithersburg, MD 20899-6103 (United States); Bhatti, Kanwal Preet; Leighton, C. [Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455-0132 (United States); Shiv Halasyamani, P., E-mail: psh@uh.edu [Department of Chemistry, University of Houston, 136 Fleming Building, Houston, TX 77204-5003 (United States)

2012-12-15

Crystals and polycrystalline powders of two new oxide materials, Tl{sub 4}CuTeO{sub 6} and Tl{sub 6}CuTe{sub 2}O{sub 10}, have been synthesized by hydrothermal and solid-state methods. The materials were structurally characterized by single-crystal X-ray diffraction. Tl{sub 4}CuTeO{sub 6} and Tl{sub 6}CuTe{sub 2}O{sub 10} exhibit one dimensional anionic slabs of [CuTeO{sub 6}]{sup 4-} and [CuTe{sub 2}O{sub 10}]{sup 6-}, respectively. Common to both slabs is the occurrence of Cu{sup 2+}O{sub 4} distorted squares and Te{sup 6+}O{sub 6} octahedra. The slabs are separated by Tl{sup +} cations. For Tl{sub 4}CuTeO{sub 6}, magnetic measurements indicate a maximum at {approx}8 K in the temperature dependence of the susceptibility. Low temperature neutron diffraction data confirm no long-range magnetic ordering occurs and the susceptibility was adequately accounted for by fits to a Heisenberg alternating chain model. For Tl{sub 6}CuTe{sub 2}O{sub 10} on the other hand, magnetic measurements revealed paramagnetism with no evidence of long-range magnetic ordering. Infrared, UV-vis spectra, thermogravimetric, and differential thermal analyses are also reported. Crystal data: Tl{sub 4}CuTeO{sub 6}, Triclinic, space group P-1 (No. 2), a=5.8629(8) A, b=8.7848(11) A, c=9.2572(12) A, {alpha}=66.0460(10), {beta}=74.2010(10), {gamma}=79.254(2), V=417.70(9) A{sup 3}, and Z=2; Tl{sub 6}CuTe{sub 2}O{sub 10}, orthorhombic, space group Pnma (No. 62), a=10.8628(6) A, b=11.4962(7) A, c=10.7238(6) A, V=1339.20(13) A{sup 3}, and Z=4. - Graphical Abstract: Two new oxide materials, Tl{sub 4}CuTeO{sub 6} and Tl{sub 6}CuTe{sub 2}O{sub 10}, have been synthesized and characterized. The materials exhibit one dimensional crystal structures consisting of CuO{sub 4} and TeO{sub 6} polyhedra. Highlights: Black-Right-Pointing-Pointer Two New Tl-Te-Cu-oxides have been synthesized and structurally characterized. Black-Right-Pointing-Pointer For Tl{sub 4}CuTeO{sub 6}, magnetic measurements indicate a

Displacement-Based Seismic Design Procedure for Framed Buildings with Dissipative Braces Part II: Numerical Results

International Nuclear Information System (INIS)

Mazza, Fabio; Vulcano, Alfonso

2008-01-01

For a widespread application of dissipative braces to protect framed buildings against seismic loads, practical and reliable design procedures are needed. In this paper a design procedure based on the Direct Displacement-Based Design approach is adopted, assuming the elastic lateral storey-stiffness of the damped braces proportional to that of the unbraced frame. To check the effectiveness of the design procedure, presented in an associate paper, a six-storey reinforced concrete plane frame, representative of a medium-rise symmetric framed building, is considered as primary test structure; this structure, designed in a medium-risk region, is supposed to be retrofitted as in a high-risk region, by insertion of diagonal braces equipped with hysteretic dampers. A numerical investigation is carried out to study the nonlinear static and dynamic responses of the primary and the damped braced test structures, using step-by-step procedures described in the associate paper mentioned above; the behaviour of frame members and hysteretic dampers is idealized by bilinear models. Real and artificial accelerograms, matching EC8 response spectrum for a medium soil class, are considered for dynamic analyses

4-Aminobenzoic acid–1,2-bis(4-pyridylethane (2/1

Directory of Open Access Journals (Sweden)

Fwu Ming Shen

2010-07-01

Full Text Available In the title compound, C12H12N2·2C7H7NO2, the 4-aminobenzoic acid molecules are linked by O—H...N hydrogen bonds to 1,2-bis(4-pyridylethane, forming linear hydrogen bonded chains parallel to [2overline{1}1]. The structure exhibits a hydrogen-bonding network involving COOH...N(pyridyl and amine and carboxylic N—H... O interactions. In addition, π–π stacking interactions [centroid–centroid distance = 3.8622 (14 Å] are also present.

Brominated dioxins/furans and hydroxylated polybrominated diphenyl ethers: Occurrences in commercial 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) and 2,4,6-tribromophenol, and formation during synthesis of BTBPE.

Science.gov (United States)

Ren, Man; Zeng, Hao; Peng, Ping-An; Li, Hui-Ru; Tang, Cai-Ming; Hu, Jian-Fang

2017-07-01

Polybrominated dibenzo-p-dioxins (PBDDs) and hydroxylated polybrominated diphenyl ethers (OH-PBDEs) can be formed from bromophenols (BPs) by thermal degradation, biosynthesis or phototransformation. However, it is unknown whether PBDDs and OH-PBDEs can be formed during the chemical production processes that utilize BPs as raw materials. 2,4,6-tribromophenol (2,4,6-TBP) is an important raw material for the synthesis of 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), a novel brominated flame retardant. In this study, PBDDs, polybrominated dibenzofurans (PBDFs) and OH-PBDEs have been identified and quantified in commercially available BTBPE and 2,4,6-TBP. Furthermore, their formation as unintentional by-products during the laboratory synthesis of BTBPE from 2,4,6-TBP and 1,2-dibromoethane in the presence of sodium carbonate has also been investigated. 2,3,7,8-substituted PBDDs and PBDFs (2,3,7,8-PBDD/Fs) were undetectable in commercial samples of BTBPE and present in low levels (nanogram per gram) in 2,4,6-TBP. Two tetrabrominated dibenzo-p-dioxins (TeBDDs), namely 1,3,6,8- and 1,3,7,9-TeBDD, and three hydroxylated pentabrominated diphenyl ethers (OH-pentaBDEs), namely 4'-OH-BDE121, 2'-OH-BDE121, and 6'-OH-BDE100, were identified or tentatively identified, and quantitatively estimated to be at concentrations in the range of undetectable to several thousands of nanograms per gram in commercial BTBPE and 2,4,6-TBP. TeBDDs and OH-pentaBDEs were formed as by-products from 2,4,6-TBP during BTBPE synthesis. Further studies need to be conducted in order to determine whether PBDD/Fs and OH-PBDEs are also formed during the industrial synthesis of other chemical compounds that utilize BPs as raw materials or intermediates. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hysteretic Behavior of Tubular Steel Braces Having Carbon Fiber Reinforced Polymer Reinforcement Around End Net Sections

Directory of Open Access Journals (Sweden)

Cem Haydaroğlu

2015-12-01

Full Text Available This study presents an experimental investigation into the seismic retrofit of tubular steel braces using carbon fiber reinforced polymer (CFRP members. CFRP retrofitting of net sections for compact tubes are proposed for delaying potential local net section failure. A total of almost full-scale three (TB-1, TB-2, and TB-3 compact steel tubular specimens were designed per AISC specifications, constructed, and cyclically tested to fracture. Retrofitted braces, when compared to the reference specimen, developed fuller hysteretic curves. Increase in cumulative hysteretic energy dissipation and the elongation in fracture life in the specimen retrofitted with CFRP plates and CFRP sheet wraps at net sections are observed during testing. This resulted in a maximum of 82.5% more dissipated energy for compact tube specimens. Also, this retrofit provided a longer experimental fracture life (maximum 59% more. Due to fracture initiation during the last cycles, significant reductions in strength and stiffness have been obtained. No significant change (maximum 10% in the brace stiffness was observed, which could be desirable in seismic retrofit applications. Pushover analysis per FEMA 356 for the bare specimen shows that FEMA does not represent actual brace behavior in the compression side although pushover and experimental results are in good agreement in the tension side.

[14C]-radiolabeling of {[trans-(8β)]-6-methyl-1-(1-methylethyl) ergoline-8-carboxylic acid, 4-methoxycyclohexyl ester (Z)-2-buteneidioate (1:1)}

International Nuclear Information System (INIS)

Marzoni, G.; Wheeler, W.J.; Garbrecht, W.L.

1988-01-01

The 5HT 2 -receptor antagonist, [ 14 C]-labeled brace[trans-(8β)]-6-methyl-1-(1-methylethyl)ergoline-8-carboxylic acid, 4-methoxycyclohexyl ester (Z)-2-butenedioate (1:1)brace (LY281067) was synthesized from unlabeled 6-methyl-1-(1-methylethyl)ergoline-8-carboxylic acid. The [ 14 C] label was introduced into the carboxyl group attached to the 8 position of the ergoline nucleus. This site is stable to metabolism. The synthesis involves removal of an unlabeled carboxyl group and subsequent reinsertion of a [ 14 C]-labeled carboxyl group into the same position. The radiolabel is not introduced until near the end of the synthesis which allows for ease of handling and scale-up of intermediates. (author)

Team care to cure adolescents with braces (avoiding low quality of life, pain and bad compliance): a case–control retrospective study. 2011 SOSORT Award winner

OpenAIRE

Tavernaro, Marta; Pellegrini, Anna; Tessadri, Fabrizio; Zaina, Fabio; Zonta, Andrea; Negrini, Stefano

2012-01-01

Abstract Background Bracing could be efficacious, given good compliance and quality of braces. Recently the SOSORT Brace Treatment Management Guidelines (SBTMG) have highlighted the perceived importance of the professional teams surrounding braced patients. Purpose To verify the impact of a complete rehabilitation team in the adolescent patient with bracing. Materials and methods Design. Initial cross-sectional study, followed by a retrospective case–control study. Population: Thirty-eight pa...

The effect of a dynamic PCL brace on patellofemoral compartment pressures in PCL-and PCL/PLC-deficient knees.

Science.gov (United States)

Welch, Tyler; Keller, Thomas; Maldonado, Ruben; Metzger, Melodie; Mohr, Karen; Kvitne, Ronald

2017-12-01

The natural history of posterior cruciate ligament (PCL) deficiency includes the development of arthrosis in the patellofemoral joint (PFJ). The purpose of this biomechanical study was to evaluate the hypothesis that dynamic bracing reduces PFJ pressures in PCL- and combined PCL/posterolateral corner (PLC)-deficient knees. Controlled Laboratory Study. Eight fresh frozen cadaveric knees with intact cruciate and collateral ligaments were included. PFJ pressures and force were measured using a pressure mapping system via a lateral arthrotomy at knee flexion angles of 30°, 60°, 90°, and 120° in intact, PCL-deficient, and PCL/PLC-deficient knees under a combined quadriceps/hamstrings load of 400 N/200 N. Testing was then repeated in PCL- and PCL/PLC-deficient knees after application of a dynamic PCL brace. Application of a dynamic PCL brace led to a reduction in peak PFJ pressures in PCL-deficient knees. In addition, the brace led to a significant reduction in peak pressures in PCL/PLC-deficient knees at 60°, 90°, and 120° of flexion. Application of the dynamic brace also led to a reduction in total PFJ force across all flexion angles for both PCL- and PCL/PLC-deficient knees. Dynamic bracing reduces PFJ pressures in PCL- and combined PCL/PLC-deficient knees, particularly at high degrees of knee flexion.

The cost-effectiveness of semi-rigid ankle brace to facilitate return to work following first-time acute ankle sprains.

Science.gov (United States)

Fatoye, Francis; Haigh, Carol

2016-05-01

To examine the cost-effectiveness of semi-rigid ankle brace to facilitate return to work following first-time acute ankle sprains. Economic evaluation based on cost-utility analysis. Ankle sprains are a source of morbidity and absenteeism from work, accounting for 15-20% of all sports injuries. Semi-rigid ankle brace and taping are functional treatment interventions used by Musculoskeletal Physiotherapists and Nurses to facilitate return to work following acute ankle sprains. A decision model analysis, based on cost-utility analysis from the perspective of National Health Service was used. The primary outcomes measure was incremental cost-effectiveness ratio, based on quality-adjusted life years. Costs and quality of life data were derived from published literature, while model clinical probabilities were sourced from Musculoskeletal Physiotherapists. The cost and quality adjusted life years gained using semi-rigid ankle brace was £184 and 0.72 respectively. However, the cost and quality adjusted life years gained following taping was £155 and 0.61 respectively. The incremental cost-effectiveness ratio for the semi-rigid brace was £263 per quality adjusted life year. Probabilistic sensitivity analysis showed that ankle brace provided the highest net-benefit, hence the preferred option. Taping is a cheaper intervention compared with ankle brace to facilitate return to work following first-time ankle sprains. However, the incremental cost-effectiveness ratio observed for ankle brace was less than the National Institute for Health and Care Excellence threshold and the intervention had a higher net-benefit, suggesting that it is a cost-effective intervention. Decision-makers may be willing to pay £263 for an additional gain in quality adjusted life year. The findings of this economic evaluation provide justification for the use of semi-rigid ankle brace by Musculoskeletal Physiotherapists and Nurses to facilitate return to work in individuals with first-time ankle

The effect of taping versus semi-rigid bracing on patient outcome and satisfaction in ankle sprains: a prospective, randomized controlled trial

Directory of Open Access Journals (Sweden)

Lardenoye Sacha

2012-05-01

Full Text Available Abstract Background Functional treatment is a widely used and generally accepted treatment for ankle sprain. A meta-analysis comparing the different functional treatment options could not make definitive conclusions regarding the effectiveness, and until now, little was known about patient satisfaction in relation to the outcome. Methods Patients with acute ankle sprain received rest, ice, compression and elevation with an compressive bandage at the emergency department. After 5-7 days, 100 patients with grade II and III sprains were randomized into two groups: one group was treated with tape and the other with a semi-rigid ankle brace, both for 4 weeks. Post-injury physical and proprioceptive training was standardized. As primary outcome parameter patient satisfaction and skin complications were evaluated using a predefined questionnaire and numeric rating scale. As secondary outcome parameter the ankle joint function was assessed using the Karlsson scoring scale and range of motion. Results Patient-reported comfort and satisfaction during treatment with a semi-rigid brace was significantly increased. The rate of skin complication in this group was significantly lower compared to the tape group (14.6% versus 59.1%, P  Conclusion Treatment of acute ankle sprain with semi-rigid brace leads to significantly higher patient comfort and satisfaction, both with similar good outcome.

FT-IR spectroscopic study on the hofmann-Td type complex: M(4-Phenylpyridine)2M'(CN)4 (M=Ni; M'=Cd)

International Nuclear Information System (INIS)

Parlak, C.

2005-01-01

New Hofmann-Td type complex in the form of M(4-Phenylpyridine) 2 M'(CN) 4 (M = Ni, M' = Cd) was prepared in powder form and its infrared spectra is reported in the region of 4000-200 cm-1. From the spectral findings, this compound is similar in structure to the Hofmann-Td type complexes

Solvent control of charge transfer excited state relaxation pathways in [Fe(2,2 '-bipyridine)(CN)4]2-

DEFF Research Database (Denmark)

Kjær, Kasper Skov; Kunnus, Kristjan; Harlang, Tobias C. B.

2018-01-01

The excited state dynamics of solvated [Fe(bpy)(CN)4]2-, where bpy = 2,2'-bipyridine, show significant sensitivity to the solvent Lewis acidity. Using a combination of optical absorption and X-ray emission transient spectroscopies, we have previously shown that the metal to ligand charge transfer...... the MLCT excited state relaxation dynamics of [Fe(bpy)(CN)4]2- in water, a strong Lewis acid solvent. The charge-transfer excited state is now found to decay in less than 100 femtoseconds, forming a quasi-stable metal centered excited state with a 13 picosecond lifetime. We find that this MC excited state...... developed for solar applications....

The importance of trunk perception during brace treatment in moderate juvenile idiopathic scoliosis: What is the impact on self-image?

Science.gov (United States)

Paolucci, Teresa; Piccinini, Giulia; Iosa, Marco; Piermattei, Cristina; De Angelis, Simona; Zangrando, Federico; Saraceni, Vincenzo Maria

2017-01-01

The perception of body image and the deformity of the trunk in patients with adolescent idiopathic scoliosis (AIS) are a silver lining that has yet to be discussed in the relevant literature during brace rehabilitation treatment. To determine whether and how the use of the brace changes perception of the trunk in patients with AIS by the drawing test. We observed 32 subjects with AIS from our Rehabilitation outpatient clinic and divided them into the brace treatment (BG-16 subjects) and the non-brace treatment (CG-16 subjects). Trunk perception and quality of life were evaluated using the Trunk Appearance Perception Scale and Scoliosis Research Society-22 questionnaire, and the perception of one's back was measured by the drawing test. Pain was lower in BG versus CG (p= 0.095). Satisfaction with the treatment was higher in BG than in CG (p= 0.002). Self-image did not differ significantly between the groups in terms of TAPS. Drawings of the most severe cases of scoliosis were made by the group without the brace. The use of the brace corrects the function of the trunk and has a positive influence on its perception.

[Conservative treatment of idiopathic scoliosis with effective braces: early response to trunk asymmetry may avoid curvature progress].

Science.gov (United States)

Matussek, J; Dingeldey, E; Wagner, F; Rezai, G; Nahr, K

2014-07-01

Vertical posture of the growing child requires minute central nervous control mechanisms in order to maintain symmetry of the torso in its various activities. Scoliosis describes a constant deviation in the frontal, transverse and sagittal planes from the dynamic symmetry of the trunk. Early intervention with effective bracing, physiotherapy and sports can reverse curve progression during growth spurts, once these are identified in screening. Modern braces have a derotating and reducing effect (mirror effect) on asymmetric body volumes, thus influencing the growing torso and restoring lasting symmetry. Recent data support the use of braces to reverse progressing scoliosis.

[Fe(III)(dmbpy)(CN)4]-: a new building block for designing single-chain magnets.

Science.gov (United States)

Toma, Luminita Marilena; Pasán, Jorge; Ruiz-Pérez, Catalina; Lloret, Francesc; Julve, Miguel

2012-11-28

We herein present the synthesis and magneto-structural study of a new family of heterobimetallic chains of general formula {[Fe(III)(dmbpy)(CN)(4)](2)M(II)(H(2)O)(2)}(n)·pnH(2)O [dmbpy = 4,4'-dimethyl-2,2'-bipyridine; M = Mn (2), Cu (3), Ni (4) and Co (5) with p = 4 (2), 3 (3), 9 (4) and 3.5 (5)] which were prepared by using the mononuclear PPh(4)[Fe(III)(dmbpy)(CN)(4)]·3H(2)O (1) building block (PPh(4)(+) = tetraphenylphosphonium) as a ligand toward fully solvated M(II) ions. The structure of 1 consists of discrete [Fe(III)(dmbpy)(CN)(4)](-) anions, tetraphenylphosphonium cations and noncoordinated water molecules. Complexes 2-5 are isostructural compounds whose structure consists of neutral 4,2-wave like heterobimetallic chains of formula {[Fe(III)(dmbpy)(CN)(4)](2)M(II)(H(2)O)(2)}(n) where the [Fe(III)(dmbpy)(CN)(4)](-) entity adopts a bis-monodentate coordination mode toward trans-[M(II)(H(2)O)(2)] units through two of its four cyanide groups in cis positions. 1 exhibits the magnetic behaviour of magnetically isolated six-coordinate low-spin Fe(III) complexes with an important orbital contribution. 2 behaves as ferrimagnetic Fe(III)(2)Mn(II) chains, whereas 3-5 exhibit intrachain ferromagnetic couplings between the low-spin Fe(III) and either Cu(II) (3), Ni (4) or Co(II) (5) as well as frequency-dependence of the out-of-phase ac susceptibility signals below 3.0 (3), 5.5 (4) and 5.0 K (5). The relaxation time and the energy to reverse the magnetization of 3-5 are related to the anisotropy of the M(II) center and to the intra- and interchain magnetic interactions. Unprecedentedly in the world of cyanide-bearing complexes, 5 exhibits a double slow relaxation of the magnetization.

Scaling analysis of [Fe(pyrazole)4]2[Nb(CN)8] molecular magnet

Science.gov (United States)

Konieczny, P.; Pełka, R.; Zieliński, P. M.; Pratt, F. L.; Pinkowicz, D.; Sieklucka, B.; Wasiutyński, T.

2013-10-01

The critical behaviour of the three dimensional (3D) molecular magnet {[FeII(pirazol)4]2[NbIV(CN)8]·4H2O}n has been studied with the use of experimental techniques such as ac magnetometry and zero field μSR spectroscopy. The sample orders magnetically below Tc=7.8 K. The measurements allowed to determine static exponents β, γ, and the dynamic exponent w. The resulting exponent values indicate that the studied system belongs to the universality class of the 3D Heisenberg model.

The effect of Prophylactic knee bracing on selected performance ...

African Journals Online (AJOL)

The objective of this study was to determine if the wearing of a prophylactic knee brace by uninjured rugby players affected the following performance based parameters: speed, agility, strength, proprioception and economy of running. Thirty rugby players were subjected to a selected number of carefully monitored ...

Assessment of behavior factor of eccentrically braced frame with ...

African Journals Online (AJOL)

Assessment of behavior factor of eccentrically braced frame with vertical link in cyclic loading. ... Journal of Fundamental and Applied Sciences ... In order to understand the behavior of these structures using non-linear static and dynamic analysis of building's behavior factor, eccentric and exocentric systems were calculated ...

Densities and apparent molar volumes of HClO{sub 4}(aq) and Yb(ClO{sub 4}){sub 3}(aq) at elevated temperatures and pressures

Energy Technology Data Exchange (ETDEWEB)

Hakin, Andrew W. E-mail: hakin@uleth.ca; Lukacs, Michael J.; Jin Lianliu

2004-09-01

Relative densities have been measured for acidified aqueous solutions of ytterbium perchlorate {l_brace}Yb(ClO{sub 4}){sub 3}{r_brace} at approximately T=(348.15, 373.15, 398.15, and 423.15) K and p=(10.0, 20.0, and 30.0) MPa over the concentration range 0.01624{<=}m{sub 2}/(mol {center_dot} kg{sup -1}) {<=} 0.2531 using an optically coupled vibrating tube densimeter (OCVTD). Experimental apparent molar volumes have been calculated from the density measurements, and apparent molar volumes for the aqueous perchlorate salt have been calculated using Young's rule. The application of Young's rule requires apparent molar volumes for aqueous perchloric acid (HClO{sub 4}) solutions over extended temperature and pressure ranges. These values were calculated from densities for aqueous HClO{sub 4} solutions that were measured using the OCVTD at the same temperatures and pressures as those used to investigate the density surface of the acidified aqueous Yb(ClO{sub 4}){sub 3} solutions. The temperature, pressure, and composition surfaces of the apparent molar volumes for Yb(ClO{sub 4}){sub 3}(aq) and HClO{sub 4}(aq) have been modelled using Pitzer ion-interaction equations. Apparent molar volumes at infinite dilution obtained from these models have been compared to those which can be calculated using the semi-empirical Helgeson, Kirkham, and Flowers equations of state. Values for the apparent molar volume at infinite dilution of the ytterbium trivalent cation have also been calculated using simple additivity principles.

Synthesis and crystal structure of the quaternary compound AgFe{sub 2}GaTe{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Delgado, Gerzon E., E-mail: gerzon@ula.ve [Laboratorio de Cristalografía, Departamento de Química, Facultad de Ciencias, Universidad de Los Andes, Mérida 5101 (Venezuela, Bolivarian Republic of); Quintero, Eugenio; Tovar, Rafael; Grima-Gallardo, Pedro; Quintero, Miguel [Centro de Estudio de Semiconductores, Departamento de Física, Facultad de Ciencias, Universidad de Los Andes, Mérida 5101 (Venezuela, Bolivarian Republic of)

2014-11-15

Highlights: • New quaternary compound. • Synthesis from solid state reaction. • Crystal structure. • Rietveld refinement. - Abstract: The crystal structure of the quaternary compound AgFe{sub 2}GaTe{sub 4}, belonging to the system I–II{sub 2}–III–VI{sub 4}, was characterized by Rietveld refinement using X-ray powder diffraction data. The powder pattern was composed by 84.5% of the principal phase AgFe{sub 2}GaTe{sub 4} and 15.5% of the secondary phase FeTe. This material crystallizes with stannite structure in the tetragonal space group I-42m (N° 121), Z = 2, unit cell parameters a = 6.3409(2) Å, c = 12.0233(4) Å, V = 483.42(3) Å{sup 3}, and is isostructural with CuFe{sub 2}InSe{sub 4}.

Brace treatment of lumber spondylolysis in growing age. Patient selection by RI scintigraphy and repair of spondylolysis

Energy Technology Data Exchange (ETDEWEB)

Abumi, Kuniyoshi; Hino, Hiroyuki; Sato, Shigeyoshi; Kaneda, Kiyoshi [Hokkaido Univ., Sapporo (Japan). School of Medicine

1996-07-01

From 1987 to 1994, brace treatment was prescribed to 29 patients with lumbar spondylolysis in growing age, ranging from nine to 18 years, in whom {sup 99m}Tc bone scintigraphy showed positive at the pars interarticularis. Single photon emission computed tomography was also conducted an recent cases. Spondylolysis was bilateral in 27 patients and unilateral in two. Polypropylene brace was applied for three to four months with restriction of sport activities. As a result, 46 out of 58 spondylolysis healed with a healing rate of 79%. Selection of patients using bone scintigraphy for brace treatment in lumbar spondylolysis in growing age would help to increase the union rate. (author)

Brace treatment of lumber spondylolysis in growing age. Patient selection by RI scintigraphy and repair of spondylolysis

International Nuclear Information System (INIS)

Abumi, Kuniyoshi; Hino, Hiroyuki; Sato, Shigeyoshi; Kaneda, Kiyoshi

1996-01-01

From 1987 to 1994, brace treatment was prescribed to 29 patients with lumbar spondylolysis in growing age, ranging from nine to 18 years, in whom 99m Tc bone scintigraphy showed positive at the pars interarticularis. Single photon emission computed tomography was also conducted an recent cases. Spondylolysis was bilateral in 27 patients and unilateral in two. Polypropylene brace was applied for three to four months with restriction of sport activities. As a result, 46 out of 58 spondylolysis healed with a healing rate of 79%. Selection of patients using bone scintigraphy for brace treatment in lumbar spondylolysis in growing age would help to increase the union rate. (author)

Conservative treatment of lateral epicondylitis: brace versus physical therapy or a combination of both: a randomized clinical trial

NARCIS (Netherlands)

Struijs, P. A. A.; Kerkhoffs, G. M. M. J.; Assendelft, W. J. J.; van Dijk, C. N.

2004-01-01

BACKGROUND: The authors evaluated the effectiveness of brace-only treatment, physical therapy, and the combination of these for patients with tennis elbow. METHODS: Patients were randomized over 3 groups: brace-only treatment, physical therapy, and the combination of these. Main outcome measures

Optimum Design of Braced Steel Space Frames including Soil-Structure Interaction via Teaching-Learning-Based Optimization and Harmony Search Algorithms

OpenAIRE

Ayse T. Daloglu; Musa Artar; Korhan Ozgan; Ali İ. Karakas

2018-01-01

Optimum design of braced steel space frames including soil-structure interaction is studied by using harmony search (HS) and teaching-learning-based optimization (TLBO) algorithms. A three-parameter elastic foundation model is used to incorporate the soil-structure interaction effect. A 10-storey braced steel space frame example taken from literature is investigated according to four different bracing types for the cases with/without soil-structure interaction. X, V, Z, and eccentric V-shaped...

The Sforzesco brace can replace cast in the correction of adolescent idiopathic scoliosis: A controlled prospective cohort study

Directory of Open Access Journals (Sweden)

Zaina Fabio

2008-10-01

Full Text Available Abstract Background The conservative treatment of adolescent idiopathic scoliosis (AIS has traditionally been divided into two phases–correction and stabilisation–and casts, even if less used today, can be considered the best standard in the correction phase. Till the present, however, no comparison between cast and brace efficacy has been proposed. Methods This is a prospective cohort study with a retrospective control group. The aim was to verify if it is possible to obtain with a specifically developed rigid brace results comparable to a cast. We considered fifty AIS patients who had refused surgery, aged 14.1 ± 1.5 years, with 46.7 ± 7.8° Cobb scoliosis. Thirty-two consecutive patients (with no drop-outs were prospectively followed up with the Sforzesco brace (SBG, and compared against a retrospective group of eighteen patients treated with the Risser cast (RCG. The treatment time (the total correction phase was 19 ± 3 months. Out-of-brace x-rays were compared, as well as clinical results. Results Compliance and hours of treatment were higher in the RCG while all the other parameters were not different. We observed a reduction of 6° Cobb and an important aesthetic gain in both groups (P Conclusion In the corrective phase of AIS treatment it is possible with a specific rigid brace (Sforzesco – SPoRT concept to obtain scoliosis correction similar to cast. Due to the human and social costs of casting, and worst sagittal profile results, Sforzesco brace should be the preferred method wherever possible.

Scaling analysis of [Fe(pyrazole){sub 4}]{sub 2}[Nb(CN){sub 8}] molecular magnet

Energy Technology Data Exchange (ETDEWEB)

Konieczny, P., E-mail: piotr.konieczny@ifj.edu.pl [Institute of Nuclear Physics, Polish Academy of Sciences, Radzikowskiego 152, 31-342 Kraków (Poland); Pełka, R.; Zieliński, P.M. [Institute of Nuclear Physics, Polish Academy of Sciences, Radzikowskiego 152, 31-342 Kraków (Poland); Pratt, F.L. [ISIS Facility, Rutherford Appleton Laboratory, Chilton, Oxfordshire OX11 0QX (United Kingdom); Pinkowicz, D.; Sieklucka, B. [Department of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Krakow (Poland); Wasiutyński, T. [Institute of Nuclear Physics, Polish Academy of Sciences, Radzikowskiego 152, 31-342 Kraków (Poland)

2013-10-15

The critical behaviour of the three dimensional (3D) molecular magnet {[Fe"I"I(pirazol)_4]_2[Nb"I"V(CN)_8]·4H_2O}{sub n} has been studied with the use of experimental techniques such as ac magnetometry and zero field μSR spectroscopy. The sample orders magnetically below T{sub c}=7.8 K. The measurements allowed to determine static exponents β, γ, and the dynamic exponent w. The resulting exponent values indicate that the studied system belongs to the universality class of the 3D Heisenberg model. - Highlights: • The critical behaviour of {[Fe"I"I(pirazol)_4]_2[Nb"I"V(CN)_8]∙4H_2O}{sub n} has been studied. • Critical exponents β, γ, and w were obtained from ac magnetometry and ZF µSR data. • All obtained values of critical exponents are close to the 3D Heisenberg model.

The B-Lynch uterine brace suture, and a bit of this and a bit of that...

Science.gov (United States)

Karoshi, Mahantesh

2010-03-01

The widespread application of the B-Lynch brace suture to control postpartum hemorrhage has sparked interest in a variety of adjunctive methods, used alone or in combination, to control uterine bleeding. Although the B-Lynch brace suture has been used with good results throughout the world, failures can and do occur in rare instances, especially when the suture is incorrectly placed for use for an inappropriate indication. Four reports of additional methods to control postpartum hemorrhage are published in this issue of IJGO. Three use the B-Lynch brace suture combined with other techniques. The need for additional techniques reminds the reader of the importance of proper suture application for proper indication. Potential reasons for failure of the B-Lynch suture are provided.

2,3-Bis[(3-methylbiphenyl-4-ylimino]butane

Directory of Open Access Journals (Sweden)

Jingjing Chen

2014-04-01

Full Text Available The title compound, C30H28N2, is a product of the condensation reaction of 2-methyl-4-phenylaniline and butane-2,3-dione. The molecule lies on a crystallographic inversion centre. The C=N bond has an E conformation. The dihedral angle between the two benzene rings of the 4-phenyl-2-methylphenyl group is 29.19 (76°. The 1,4-diazabutadiene plane makes an angle of 70.1 (10° with the N-bonded methylphenyl ring and an angle of 81.08 (97° with the terminal phenyl group.

The effect of taping versus semi-rigid bracing on patient outcome and satisfaction in ankle sprains: a prospective, randomized controlled trial.

Science.gov (United States)

Lardenoye, Sacha; Theunissen, Ed; Cleffken, Berry; Brink, Peter Rg; de Bie, Rob A; Poeze, Martijn

2012-05-28

Functional treatment is a widely used and generally accepted treatment for ankle sprain. A meta-analysis comparing the different functional treatment options could not make definitive conclusions regarding the effectiveness, and until now, little was known about patient satisfaction in relation to the outcome. Patients with acute ankle sprain received rest, ice, compression and elevation with an compressive bandage at the emergency department. After 5-7 days, 100 patients with grade II and III sprains were randomized into two groups: one group was treated with tape and the other with a semi-rigid ankle brace, both for 4 weeks. Post-injury physical and proprioceptive training was standardized. As primary outcome parameter patient satisfaction and skin complications were evaluated using a predefined questionnaire and numeric rating scale. As secondary outcome parameter the ankle joint function was assessed using the Karlsson scoring scale and range of motion. Patient-reported comfort and satisfaction during treatment with a semi-rigid brace was significantly increased. The rate of skin complication in this group was significantly lower compared to the tape group (14.6% versus 59.1%, P ankle joint was similar between the two treatment groups, as well as reported pain. Treatment of acute ankle sprain with semi-rigid brace leads to significantly higher patient comfort and satisfaction, both with similar good outcome.

Automatic locking knee brace joint

Science.gov (United States)

Weddendorf, Bruce (Inventor)

1995-01-01

This invention is an apparatus for controlling the pivotal movement of a knee brace comprising a tang-and-clevis joint that has been uniquely modified. Both the tang and the clevis have a set of teeth that, when engaged, can lock the tang and the clevis together. In addition, the tang is biased away from the clevis. Consequently, when there is no axial force (i.e., body weight) on the tang, the tang is free to pivot within the clevis. However, when an axial force is exerted on the tang, the tang is pushed into the clevis, both sets of teeth engage, and the tang and the clevis lock together.

??????????? ????????? ???????????? ???????????? NH4X (?=??,?1) ??? ??????????? CdxHgi-xTe ??????? ???????? ???????????? ???????

OpenAIRE

??????, ?. ?.; ?????????, ?. ?.; ???????, ?. ?.; ?????????, ?. ?.; ?????????, ?. ?.

2004-01-01

?? ?????? ??????????? ?????????? ???????????? ?????? ??????? ???? ??????? CdxHgi_xTe-Hg-NH4Br ??? ??????? ?????? Hg ? ????????? ?????????? 560-860? ? ??????????? ?????? ?? = 103-=-105 ?? ????????? ????????, ??? ??????? ???????? ????? ? ??????????????? ??????, ????? ? ?????? - CdBr2, Hg, ??2. ??? ????????? ??????? ??????? ???????????? CdxHgi_xTe ??????? ? = 0.2; 0.3; 0.4 ?? ????????? ??? ??? ? ??? ?????????? ??????? ???????? ??????? (??? ?????? ?????? ????? ? ???????) ????????? ??????????? ???...

Effect of kinesiotaping, non-elastic taping and bracing on segmental foot kinematics during drop landing in healthy subjects and subjects with chronic ankle instability.

Science.gov (United States)

Kuni, B; Mussler, J; Kalkum, E; Schmitt, H; Wolf, S I

2016-09-01

To evaluate the effects of kinesiotape, non-elastic tape, and soft brace on segmental foot kinematics during drop landing in subjects with chronic ankle instability and healthy subjects. Controlled study with repeated measurements. Three-dimensional motion analysis laboratory. Twenty participants with chronic ankle instability and 20 healthy subjects. The subjects performed drop landings with 17 retroreflective markers on the foot and lower leg in four conditions: barefoot, with kinesiotape, with non-elastic tape and with a soft brace. Ranges of motion of foot segments using a foot measurement method. In participants with chronic ankle instability, midfoot movement in the frontal plane (inclination of the medial arch) was reduced significantly by non-elastic taping, but kinesiotaping and bracing had no effect. In healthy subjects, both non-elastic taping and bracing reduced that movement. In both groups, non-elastic taping and bracing reduced rearfoot excursion in inversion/eversion significantly, which indicates a stabilisation effect. No such effect was found with kinesiotaping. All three methods reduced maximum plantar flexion significantly. Non-elastic taping stabilised the midfoot best in patients with chronic ankle instability, while kinesiotaping did not influence foot kinematics other than to stabilise the rearfoot in the sagittal plane. ClinicalTrials.gov NCT01810471. Copyright © 2015 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

'SOSORT consensus paper on brace action: TLSO biomechanics of correction (investigating the rationale for force vector selection'

Directory of Open Access Journals (Sweden)

Maruyama T

2006-07-01

Full Text Available Abstract Background The effectiveness of orthotic treatment continues to be controversial in international medical literature due to differences in the reported results and conclusions of various studies. Heterogeneity of the samples has been suggested as a reason for conflicting results. Besides the obvious theoretical differences between the brace concepts, the variability in the technical factors can also explain the contradictory results between same brace types. This paper will investigate the degree of variability among responses of scoliosis specialists from the Brace Study Ground of the International Society on Scoliosis Orthopedic and Rehabilitation Treatment SOSORT. Ultimately, this information could be a foundation for establishing a consensus and framework for future prospective controlled studies. Methods A preliminary questionnaire on the topic of 'brace action' relative to the theory of three-dimensional scoliosis correction and brace treatment was developed and circulated to specialists interested in the conservative treatment of adolescent idiopathic scoliosis. A particular case was presented (main thoracic curve with minor lumbar. Several key points emerged and were used to develop a second questionnaire which was discussed and full filed after the SOSORT consensus meeting (Milano, Italy, January 2005. Results Twenty-one questionnaires were completed. The Chêneau brace was the most frequently recommended. The importance of the three point system mechanism was stressed. Options about proper pad placement on the thoracic convexity were divided 50% for the pad reaching or involving the apical vertebra and 50% for the pad acting caudal to the apical vertebra. There was agreement about the direction of the vector force, 85% selecting a 'dorso lateral to ventro medial' direction but about the shape of the pad to produce such a force. Principles related to three-dimensional correction achieved high consensus (80%–85%, but suggested

Cis-[RuCl(BzCN)(N-N)(P-P)]PF6 complexes: Synthesis and in vitro antitumor activity: (BzCN=benzonitrile; N-N=2,2'-bipyridine; 1,10-phenanthroline; P-P=1,4-bis(diphenylphosphino) butane, 1,2-bis(diphenylphosphino)ethane, or 1,1'-(diphenylphosphino)ferrocene).

Science.gov (United States)

Pereira, Flávia de C; Lima, Benedicto A V; de Lima, Aliny P; Pires, Wanessa C; Monteiro, Thallita; Magalhães, Lorena F; Costa, Wanderson; Graminha, Angélica E; Batista, Alzir A; Ellena, Javier; Siveira-Lacerda, Elisângela de P

2015-08-01

The motivation to use ruthenium complexes in cancer treatment has led our research group to synthesize complexes with this metal and test them against several types of tumor cells, yielding promising results. In this paper the results of biological tests, assessed by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, were carried out on the complexes cis-[RuCl(BzCN)(bipy)(dppe)]PF6 (1), cis-[RuCl(BzCN)(bipy)(dppb)]PF6 (2), cis-[RuCl(BzCN)(bipy)(dppf)]PF6 (3) and cis-[RuCl(BzCN)(phen)(dppb)]PF6 (4) which are described [BzCN = b enzonitrile; bipy = 2,2'-bipyridine; phen = 1,10-phenanthroline; dppe = 1,2-bis(diphenylphosphino) ethane; dppb = 1,4-bis-(diphenylphosphino)butane; dppf = 1,1'-bis(diphenylphosphino)ferrocene]. The present study is focused on the cytotoxic activity of complexes (1)-(4) against four tumor cell lines and on the apoptosis and changes in the cell cycle and gene expression observed in the sarcoma 180 (S180) tumor cell line treated with complex (1). The results demonstrated that this complex inhibits S180 cell growth, with an IC50 of 17.02 ± 8.21 μM, while exhibiting lower cytotoxicity (IC50 = 53.73 ± 5.71 μM) towards lymphocytes (normal cells). Flow cytometry revealed that the complex inhibits the growth of tumor cells by inducing apoptosis as evidenced by an increase in the proportion of cells positive for annexin V staining and G0/G1 phase cell-cycle arrest. Further investigation showed that complex (1) induces a drop in the mitochondrial membrane potential and provokes a decrease in Bcl-2 protein expression and increase in caspase 3 activation, while the increased activation of caspase 8 caused a decrease in the gene expression in caspases 3 and 9. Increases in Tp53 and Bax expressions were also observed. Copyright © 2015 Elsevier Inc. All rights reserved.

Research on Cu2ZnSnTe4 crystals and heterojunctions based on such crystals

Directory of Open Access Journals (Sweden)

Kovaliuk T. T.

2015-12-01

Full Text Available The paper reports on the results of the studies of magnetic, kinetic and optical properties of Cu2ZnSnTe4 crystals. The Cu2ZnSnTe4 crystals showed diamagnetic properties (the magnetic susceptibility almost independent of the magnetic field and temperature. The Cu2ZnSnTe4 crystals possessed p-type of conductivity and the Hall coefficient was independent on temperature. The temperature dependence of the electrical conductivity of the Cu2ZnSnTe4 crystal shows metallic character, i. e. decreases with the increase of temperature, that is caused by the lower charge carrier mobility at higher temperature. Thermoelectric power of the samples ispositive that also indicates on the prevalence of p-type conductivity. Heterojunctions n-TiN/p-Cu2ZnSnTe4, n-TiO2/p-Cu2ZnSnTe4 and n-MoO/p-Cu2ZnSnTe4 were fabricated by the reactive magnetron sputtering of TiN, TiO2 and MoOx thin films, respectively, onto the substrates made of the Cu2ZnSnTe4 crystals. The dominating current transport mechanisms in the n-TiN/p-Cu2ZnSnTe4 and n-TiO2/p-Cu2ZnSnTe4 heterojunctions were established to be the tunnel-recombination mechanism at forward bias and tunneling at reverse bias.

Synthesis of leukotrienes labelled with deuterium: [11,12,14,15-2H4]-LTA4, -LTC4, -LTD4 and -LTE4

International Nuclear Information System (INIS)

Lellouche, J.P.; Aubert, F.; Noel, J.P.; Boullais, C.; Beaucourt, J.P.

1989-01-01

Semi-hydrogenation by D 2 gas on Lindlar catalyst of an acetylenic precursor led to [11,12,14,15- 2 H 4 ]-LTA 4 methyl ester. Nucleophilic opening of the epoxide ring by amino thioacids accorded, after saponification, the corresponding deuterated peptidoleukotrienes LTC 4 , LTD 4 and LTE 4 . (author)

Structural archetypes in nickel(II) hybrid vanadates. Towards a directed hydrothermal synthesis

Energy Technology Data Exchange (ETDEWEB)

Luis, R. Fernandez de; Urtiaga, M.K. [Dpto. Mineralogia y Petrologia, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco/UPV/EHU, Apdo. 644, 48080 Bilbao (Spain); Mesa, J.L.; Rojo, T. [Dpto. Quimica Inorganica, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco UPV/EHU, Apdo. 644, 48080 Bilbao (Spain); Arriortua, M.I. [Dpto. Mineralogia y Petrologia, Facultad de Ciencia y Tecnologia, Universidad del Pais Vasco/UPV/EHU, Apdo. 644, 48080 Bilbao (Spain)], E-mail: maribel.arriortua@ehu.es

2009-07-01

In the present work, we relate the modifications of the initial synthesis parameters (pH value, stoichiometry and concentration) with the different structural archetypes obtained in the {l_brace}Ni/Bpy/VO{r_brace} and {l_brace}Ni/Bpe/VO{r_brace} systems (4,4'-bipyridine (Bpy), 1,2-di(4-pyridyl) ethylene (Bpe)). The vanadium coordination is partially controlled by the hydrothermal synthesis conditions, and the final crystal structures depend on the synergetic interaction between the metal-organic subnets and the vanadium oxide subunits.

The uranium(VI) oxoazides [UO{sub 2}(N{sub 3}){sub 2}.CH{sub 3}CN], [(bipy){sub 2}(UO{sub 2}){sub 2}(N{sub 3}){sub 4}], [(bipy)UO{sub 2}(N{sub 3}){sub 3}]{sup -}, [UO{sub 2}(N{sub 3}){sub 4}]{sup 2-}, and [(UO{sub 2}){sub 2}(N{sub 3}){sub 8}]{sup 4-}

Energy Technology Data Exchange (ETDEWEB)

Haiges, Ralf; Christe, Karl O. [Loker Hydrocarbon Research Institute and Department of Chemistry, University of Southern California, Los Angeles, CA (United States); Vasiliu, Monica; Dixon, David A. [Department of Chemistry, The University of Alabama, Tuscaloosa, AL (United States)

2017-01-12

The reaction between [UO{sub 2}F{sub 2}] and an excess of Me{sub 3}SiN{sub 3} in acetonitrile solution results in fluoride-azide exchange and the uranium(VI) dioxodiazide adduct [UO{sub 2}(N{sub 3}){sub 2}.CH{sub 3}CN] was isolated in quantitative yield. The subsequent reaction of [UO{sub 2}(N{sub 3}){sub 2}.CH{sub 3}CN] with 2,2{sup '}-bipyridine (bipy) resulted in the formation of the azido-bridged binuclear complex [(bipy){sub 2}(UO{sub 2}){sub 2}(N{sub 3}){sub 4}]. The triazido anion [(bipy)UO{sub 2}(N{sub 3}){sub 3}]{sup -} was obtained by the reaction of [UO{sub 2}(N{sub 3}){sub 2}.CH{sub 3}CN] with stoichiometric amounts of bipy and the ionic azide [PPh{sub 4}][N{sub 3}]. The reaction of [UO{sub 2}(N{sub 3}){sub 2}] with two equivalents of the [PPh{sub 4}][N{sub 3}] resulted in the formation of the mononuclear tetraazido anion [UO{sub 2}(N{sub 3}){sub 4}]{sup 2-} as well as the azido-bridged binuclear anion [(UO{sub 2}){sub 2}(N{sub 3}){sub 8}]{sup 4-}. The novel uranium oxoazides were characterized by their vibrational spectra and in the case of [(bipy){sub 2}(UO{sub 2}){sub 2}(N{sub 3}){sub 4}].CH{sub 3}CN, [PPh{sub 4}][(bipy)UO{sub 2}(N{sub 3}){sub 3}], [PPh{sub 4}]{sub 2}[UO{sub 2}(N{sub 3}){sub 4}], [PPh{sub 4}]{sub 2}[UO{sub 2}(N{sub 3}){sub 4}].2CH{sub 3}CN, and [PPh{sub 4}]{sub 4}[(UO{sub 2}){sub 2}(N{sub 3}){sub 8}].4CH{sub 3}CN by their X-ray crystal structures. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Treatment of the Developmental Dysplasia of the Hip with an Abduction Brace in Children up to 6 Months Old

Directory of Open Access Journals (Sweden)

Raphaël Wahlen

2015-01-01

Full Text Available Introduction. Use of Pavlik harness for the treatment of DDH can be complicated for parents. Any misuse or failure in the adjustments may lead to significant complications. An abduction brace was introduced in our institution, as it was thought to be easier to use. Aim. We assess the results for the treatment of DDH using our abduction brace in children of 0–6 months old and compare these results with data on treatments using the Pavlik harness. Method. Retrospective analysis of patients with DDH from 0 to 6 months old at diagnosis, performed from 2004 to 2009. Outcomes were rates of reduction of the hip and avascular necrosis of the femoral head (AVN. Follow-up was at one year and up to 4 years old. Results. Hip reduction was successful in 28 of 33 patients (85%, with no AVN. Conclusion. Our results in terms of hip reduction rate and AVN rate are similar to those found in literature assessing Pavlik harness use, with a simpler and comfortable treatment procedure.

Outcome of humeral shaft fractures treated by functional cast brace

Directory of Open Access Journals (Sweden)

Jitendra Nath Pal

2015-01-01

Conclusion: Modified functional cast brace is one of the options in treatment for humeral shaft fractures as it can be applied on the 1 st day of the presentation in most of the situations. Simple objective scoring system was useful particularly in uneducated patients.

Two-dimensional structure of poly[[[μ2-1,4-bis(pyridin-4-ylbutane]bis(μ4-pentanedioatodicopper(II] acetonitrile disolvate

Directory of Open Access Journals (Sweden)

Do Nam Lee

2017-10-01

Full Text Available In the title compound, {[Cu2(μ4-C5H6O42(μ2-C14H16N2]·2CH3CN}n, the Cu2 dinuclear units are connected by glutartate ligands, forming one-dimensional double chains. These chains, are in turn bridged by 1,4-bis(pyridin-4-ylbutane ligands to form a two-dimensional layer structure parallel to (112. The carboxylate groups of the glutarate ligand bridge two copper(II ions, forming a paddle-wheel-type Cu2(CO24 dinuclear secondary building unit. A crystallographic inversion centre is located midway between two CuII ions, with a Cu...Cu distance of 2.639 (3 Å. The coordination geometry of the unique CuII ion is slightly disorted square pyramidal, formed by four equatorial carboxylate O atoms and an axial pyridyl N atom.

Bracing Regular Polygons as We Race into the Future

Science.gov (United States)

Frederickson, Greg N.

2012-01-01

How many rods does it take to brace a square in the plane? Once Martin Gardner's network of readers got their hands on it, it turned out to be fewer than Raphael Robinson, who originally posed the problem, thought. And who could have predicted the stunning solutions found subsequently for various generalizations of the problem?

Design method of redundancy of brace-anchor sharing supporting based on cooperative deformation

Science.gov (United States)

Liu, Jun-yan; Li, Bing; Liu, Yan; Cai, Shan-bing

2017-11-01

Because of the complicated environment requirement, the support form of foundation pit is diversified, and the brace-anchor sharing support is widely used. However, the research on the force deformation characteristics and the related aspects of the cooperative response of the brace-anchor sharing support is insufficient. The application of redundancy theory in structural engineering has been more mature, but there is little theoretical research on redundancy theory in underground engineering. Based on the idea of collaborative deformation, the paper calculates the ratio of the redundancy degree of the cooperative deformation by using the local reinforcement design method and the structural component redundancy parameter calculation formula based on Frangopol. Combined with the engineering case, through the calculation of the ratio of cooperative deformation redundancy in the joint of brace-anchor sharing support. This paper explores the optimal anchor distribution form under the condition of cooperative deformation, and through the analysis and research of displacement field and stress field, the results of the collaborative deformation are validated by comparing the field monitoring data. It provides theoretical basis for the design of this kind of foundation pit in the future.

Ankles back in randomized controlled trial (ABrCt): braces versus neuromuscular exercises for the secondary prevention of ankle sprains. Design of a randomised controlled trial.

Science.gov (United States)

Janssen, Kasper W; van Mechelen, Willem; Verhagen, Evert Alm

2011-09-27

Ankle sprains are the most common sports and physical activity related injury. There is extensive evidence that there is a twofold increased risk for injury recurrence for at least one year post injury. In up to 50% of all cases recurrences result in disability and lead to chronic pain or instability, requiring prolonged medical care. Therefore ankle sprain recurrence prevention in athletes is essential. This RCT evaluates the effect of the combined use of braces and neuromuscular training (e.g. proprioceptive training/sensorimotor training/balance training) against the individual use of either braces or neuromuscular training alone on ankle sprain recurrences, when applied to individual athletes after usual care. This study was designed as three way randomized controlled trial with one year follow-up. Healthy individuals between 12 and 70 years of age, who were actively participating in sports and who had sustained a lateral ankle sprain in the two months prior to inclusion, were eligible for inclusion. After subjects had finished ankle sprain treatment by means of usual care, they were randomised to any of the three study groups. Subjects in group 1 received an eight week neuromuscular training program, subjects in group 2 received a sports brace to be worn during all sports activities for the duration of one year, and group 3 received a combination of the neuromuscular training program and a sports brace to be worn during all sports activities for the duration of eight weeks. Outcomes were assessed at baseline and every month for 12 months therafter. The primary outcome measure was incidence of ankle sprain recurrences. Secondary outcome measures included the direct and indirect costs of recurrent injury, the severity of recurrent injury, and the residual complaints during and after the intervention. The ABrCt is the first randomized controlled trial to directly compare the secondary preventive effect of the combined use of braces and neuromuscular training

Design and synthesis of a redox-active tc-99m radiopharmaceutical with ferrocenedithiocarboxylate [FcCS=Fe(C{sub 5}H{sub 4}CS{sub 2})(C{sub 5}H{sub 5}){sup -}

Energy Technology Data Exchange (ETDEWEB)

Uccelli, Licia; Bolzati, Cristina; Boschi, Alessandra; Duatti, Adriano E-mail: dta@ifeuniv.unife.it; Morin, Christophe; Pasqualini, Roberto; Giganti, Melchiore; Piffanelli, Adriano

1999-01-01

The synthesis, at tracer level, of two Tc-99m complexes having the same chemical composition and structure, but differing by one electron in the total electron counting, is reported. These compounds have been prepared by reacting [{sup 99m}TcO{sub 4}]{sup -} with the piperidinium salt of the ligand ferrocenedithiocarboxylate {l_brace}[Fe(II)(C{sub 5}H{sub 4}CS{sub 2})(C{sub 5}H{sub 5})]{sup -}=FcCS{r_brace}, in the presence of N-methyl S-methyldithiocarbazate as donor of N{sup 3-} groups, and triphenylphosphine or SnCl{sub 2} as reducing agents. The formation of the neutral complex [{sup 99m}Tc(N)(FcCS){sub 2}] (compound A) and of the monocationic, mixed-valence complex [{sup 99m}Tc(N)(FcCS) (FcCS*)]{sup +} (compound B) {l_brace}FcCS* [Fe(III)(C{sub 5}H{sub 4}CS{sub 2})(C{sub 5}H{sub 5})]{r_brace} was obtained in high yield. Both complexes comprise a terminal Tc{identical_to}N multiple bond and two FcCS ligands coordinated to the metal center through the two sulfur atoms of the -CS{sub 2} group, but they differ in the oxidation state of one of the two iron atoms of the coordinated FcCS ligands. In complex A, the two Fe atoms are both in the +2 oxidation state, while in B, one Fe atom is in the +2 and the other is in the +3 oxidation state. Thus, B is a mixed-valence Fe(II)-Fe(III) complex. B is easily converted into A by one-electron exchange with various reductants such as triphenylphosphine and excess SnCl{sub 2}. Biodistribution studies in rats showed that complexes A and B are mostly retained in lungs and liver without any significant uptake in organs such as heart and brain.

Experimental Investigation on the Behavior of Bracing Damper Systems by Utilizing Metallic Yielding and Recentering Material Devices

Directory of Open Access Journals (Sweden)

Jong Wan Hu

2018-01-01

Full Text Available With the aim of effectively reducing the structural damage caused by earthquake events, bracing systems equipped with retrofitting damper devices, which take advantage of the energy dissipation and impact absorption, have been widely used in practical construction sites. These bracing dampers, however, have been recognized as expendable supplies for easily replacing the damaged ones after a strong earthquake because they are commonly designed to undergo concentrated force and deformation for the purpose of protecting the main structural members such as the columns and beams. In this paper, the use of new superelastic shape memory alloy (SMA dampers that can partially recover their original configuration is proposed to decrease the repair cost. In addition, the conventional steel dampers used for improving the energy dissipation arising due to metallic yielding are additionally integrated into the bracing member. The behaviors of such bracing systems with the damper devices were reproduced in experimental tests with the cyclic loading history, and then their strength capacity and recentering capability were estimated based on the experiment results. Finally, additional experimental tests were performed by imposing cyclic loading histories with different loading speeds on the superelastic SMA and steel plate damper specimens.

A series of 2D metal-quinolone complexes: Syntheses, structures, and physical properties

Energy Technology Data Exchange (ETDEWEB)

He, Jiang-Hong [College of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Xiao, Dong-Rong, E-mail: xiaodr98@yahoo.com.cn [College of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Chen, Hai-Yan; Sun, Dian-Zhen; Yan, Shi-Wei; Wang, Xin; Ye, Zhong-Li [College of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Luo, Qun-Li, E-mail: qlluo@swu.edu.cn [College of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China); Wang, En-Bo, E-mail: wangeb889@nenu.edu.cn [Key Laboratory of Polyoxometalate Science of Ministry of Education, Department of Chemistry, Northeast Normal University, Changchun 130024 (China)

2013-02-15

Six novel 2D metal-quinolone complexes, namely [Cd(cfH)(bpdc)]{center_dot}H{sub 2}O (1), [M(norfH)(bpdc)]{center_dot}H{sub 2}O (M=Cd (2) and Mn (3)), [Mn{sub 2}(cfH)(odpa)(H{sub 2}O){sub 3}]{center_dot}0.5H{sub 2}O (4), [Co{sub 2}(norfH)(bpta)({mu}{sub 2}-H{sub 2}O)(H{sub 2}O){sub 2}]{center_dot}H{sub 2}O (5) and [Co{sub 3}(saraH){sub 2}(Hbpta){sub 2}(H{sub 2}O){sub 4}]{center_dot}9H{sub 2}O (6) (cfH=ciprofloxacin, norfH=norfloxacin, saraH=sarafloxacin, bpdc=4,4 Prime -biphenyldicarboxylate, odpa=4,4 Prime -oxydiphthalate, bpta=3,3 Prime ,4,4 Prime -biphenyltetracarboxylate) have been synthesized and characterized. Compounds 1-3 consist of 2D arm-shaped layers based on the 1D {l_brace}M(COO){r_brace}{sub n}{sup n+} chains. Compounds 4 and 5 display 2D structures based on tetranuclear manganese or cobalt clusters with (3,6)-connected kgd topology. Compound 6 exhibits a 2D bilayer structure, which represents the first example of metal-quinolone complexes with 2D bilayer structure. By inspection of the structures of 1-6, it is believed that the long aromatic polycarboxylate ligands are important for the formation of 2D metal-quinolone complexes. The magnetic properties of compounds 3-6 was studied, indicating the existence of antiferromagnetic interactions. Furthermore, the luminescent properties of compounds 1-2 are discussed. - Graphical abstract: Six novel 2D metal-quinolone complexes have been prepared by self-assemblies of the quinolones and metal salts in the presence of long aromatic polycarboxylates. Highlights: Black-Right-Pointing-Pointer Compounds 1-3 consist of novel 2D arm-shaped layers based on the 1D {l_brace}M(COO){r_brace}{sub n}{sup n+} chains. Black-Right-Pointing-Pointer Compounds 4 and 5 are two novel 2D layers based on tetranuclear Mn or Co clusters with kgd topology. Black-Right-Pointing-Pointer Compound 6 is the first example of metal-quinolone complexes with 2D bilayer structure. Black-Right-Pointing-Pointer Compounds 1-6 represent six unusual

Iodine capture by Hofmann-type clathrate Ni(II)(pz)[Ni(II)(CN)_4

International Nuclear Information System (INIS)

Massasso, Giovanni; Long, Jerome; Haines, Julien; Devautour-Vinot, Sabine; Maurin, Guillaume; Larionova, Joulia; Guerin, Christian; Guari, Yannick; Grandjean, Agnes; Onida, Barbara; Donnadieu, Bruno

2014-01-01

The thermally stable Hofmann-type clathrate framework Ni(II)(pz)[Ni(II)(CN)_4] (pz = pyrazine) was investigated for the efficient and reversible sorption of iodine (I_2) in the gaseous phase and in solution with a maximum adsorption capacity of 1 mol of I_2 per 1 mol of Ni(II)pz)[Ni(II)(CN)_4] in solution. (authors)

Corrosion studies of thermally sensitised AGR fuel element brace in pH7 and pH9.2 borate solutions

International Nuclear Information System (INIS)

Tyfield, S.P.; Smith, C.A.

1987-04-01

Brace and cladding of AGR fuel elements sensitised in reactor are susceptible to intergranular and crevice corrosion, which may initiate in the pH7 borate pond storage environment of CEGB/SSEB stations. This report considers the benefit in corrosion control that is provided by raising the pond solution pH to 9.2, whilst maintaining the boron level at 1250 gm -3 . The greater corrosion protection provided by pH9.2 solution compared to the pH7 borate solution is demonstrated by a series of tests with non-active laboratory sensitised brace samples exposed to solutions dosed with chloride or sulphate in order to promote localised corrosion. The corrosion tests undertaken consisted of 5000 hour immersions at 32 0 C and shorter term electrochemically monitored experiments (rest potential, impedance, anodic current) generally conducted at 22 0 C. The pH9.2 solution effectively inhibited the initiation of crevice and intergranular corrosion in the presence of low levels of chloride and sulphate, whereas the pH7 solution did not always do so. However, the pH9.2 solution, dosed with 40 gm -3 chloride, failed to suppress fully crevice corrosion initiated in unborated 40 gm -3 chloride solution at 22 0 C. Fluoride is not deleterious at low levels ∼ 10 gm -3 in the borate solutions. The significant improvement in corrosion control demonstrated for the change from pH7 to pH9.2 borate solution on laboratory sensitised brace samples should ideally be confirmed using complete irradiated AGR fuel elements. (U.K.)

4,4′-Bipyridinium bis(perchlorate–4-aminobenzoic acid–4,4′-bipyridine–water (1/4/2/2

Directory of Open Access Journals (Sweden)

Qun-Hui Meng

2009-01-01

Full Text Available In the structure of the title compound, C10H10N22+·2ClO4−·4C7H7NO2·2C10H8N2·2H2O, the 4,4′-bipyridinium cation has a crystallographically imposed centre of symmetry. The cation is linked by N—H...N hydrogen bonds to adjacent 4,4′-bipyridine molecules, which in turn interact via O—H...N hydrogen bonds with 4-aminobenzoic acid molecules, forming chains running parallel to [30overline{2}]. The chains are further connected into a three-dimensional network by N—H...O and O—H...O hydrogen-bonding interactions involving the perchlorate anion, the water molecules and the 4-aminobenzoic acid molecules. In addition, π–π stacking interactions with centroid–centroid distances ranging from 3.663 (6 to 3.695 (6 Å are present. The O atoms of the perchlorate anion are disordered over two sets of positions, with refined site occupancies of 0.724 (9 and 0.276 (9.

Accounting for multiple sources of uncertainty in impact assessments: The example of the BRACE study

Science.gov (United States)

O'Neill, B. C.

2015-12-01

Assessing climate change impacts often requires the use of multiple scenarios, types of models, and data sources, leading to a large number of potential sources of uncertainty. For example, a single study might require a choice of a forcing scenario, climate model, bias correction and/or downscaling method, societal development scenario, model (typically several) for quantifying elements of societal development such as economic and population growth, biophysical model (such as for crop yields or hydrology), and societal impact model (e.g. economic or health model). Some sources of uncertainty are reduced or eliminated by the framing of the question. For example, it may be useful to ask what an impact outcome would be conditional on a given societal development pathway, forcing scenario, or policy. However many sources of uncertainty remain, and it is rare for all or even most of these sources to be accounted for. I use the example of a recent integrated project on the Benefits of Reduced Anthropogenic Climate changE (BRACE) to explore useful approaches to uncertainty across multiple components of an impact assessment. BRACE comprises 23 papers that assess the differences in impacts between two alternative climate futures: those associated with Representative Concentration Pathways (RCPs) 4.5 and 8.5. It quantifies difference in impacts in terms of extreme events, health, agriculture, tropical cyclones, and sea level rise. Methodologically, it includes climate modeling, statistical analysis, integrated assessment modeling, and sector-specific impact modeling. It employs alternative scenarios of both radiative forcing and societal development, but generally uses a single climate model (CESM), partially accounting for climate uncertainty by drawing heavily on large initial condition ensembles. Strengths and weaknesses of the approach to uncertainty in BRACE are assessed. Options under consideration for improving the approach include the use of perturbed physics

A localized surface plasmon resonance (LSPR) immunosensor for CRP detection using 4-chloro-1-naphtol (4-CN) precipitation

Science.gov (United States)

Ha, Su-Ji; Park, Jin-Ho; Byun, Ju-Young; Ahn, Young-Deok; Kim, Min-Gon

2017-07-01

In this study, C-reactive protein (CRP) was detected by monitoring of LSPR shift promoted by precipitation of 4-chloro-1-naphthol (4-CN). The precipitation occurred by horseradish peroxide (HRP) catalyst which is modified at CRP-detection antibody utilized in sandwich enzyme-linked immunosorbent assay (ELISA) on gold nano bipyramid (GNBP) substrate. Due to 4-CN precipitates which are located nearby the surface of GNBP, local refractive index (RI) and molecular density were greatly increased. This phenomenon eventually induced strong spectral red-shift of absorption band of GNBP. An excellent linear relationship (R2=0.9895) between the LSPR shift and CRP concentration was obtained in the range from 100 pg/mL to 100 ng/mL and limit of detection (LOD) was reached to 87 pg/mL.

Effect of rolling reduction on the development of rolling and recrystallization textures in Al-Mg alloys

Energy Technology Data Exchange (ETDEWEB)

Endou, S; Inagaki, H [Shonan Inst. of Tech., Fujisawashi (Japan)

2002-07-01

In order to investigate the effect of Mg content on the development of the rolling textures in Al pure Al, Al-3% Mg alloy and Al-5% Mg alloy were cold rolled by varying rolling reductions up to 97%. Their rolling textures were investigated by the orientation distribution function analysis. The extent of work hardening introduced by cold rolling was estimated by the hardness measurements. It was found that, at all rolling reductions, the main orientations of the rolling textures depended strongly on the Mg content. In pure Al, {l_brace}123{r_brace} left angle 634 right angle was always the main orientation, whereas {l_brace}112{r_brace} left angle 111 right angle was most strong in the Al-3%Mg alloy. In the Al-5% Mg alloy, the development of both {l_brace}123{r_brace} left angle 634 right angle and {l_brace}112{r_brace} left angle 111 right angle were strongly suppressed, whereas {l_brace}110{r_brace} left angle 112 right angle developed remarkably. In pure Al, most of the texture development occurred at the later half of work hardening, i.e. at rolling reductions above 70%. With increasing Mg content, rolling texture tended to develop already at lower rolling reductions. Dynamic recovery, which occurred at very high rolling reductions, suppressed the development of the rolling textures. All these results strongly suggested that the formation of dislocation cell structures and shear banding are origins of the formation of these rolling textures. On annealing these specimens at 450 C for 30 min, recrystallization textures developed only in specimens having strong rolling textures, i. e. in the specimens cold rolled more than 70%. {l_brace}100{r_brace} left angle 001 right angle developed only in pure Al and in the Al-3% Mg ally, in which {l_brace}123{r_brace} left angle 634 right angle and {l_brace}112{r_brace} left angle 111 right angle were strong in the rolling textures. Recrystallization textures of the Al-5% Mg alloy was wather random. Its main orientation, {l_brace

Di-μ-cyanido-tetra-cyanido(5,5,7,12,12,14-hexa-methyl-1,4,8,11-tetra-aza-cyclo-tetra-decane)[N-(quinolin-8-yl)quinoline-2-carboxamidato]diiron(III)nickel(II) 2.07-hydrate.

Science.gov (United States)

Yang, Yuqi; Zhou, Hongbo; Shen, Xiaoping

2013-05-01

The asymmetric unit of the title complex, [Fe2Ni(C19H12N3O)2(CN)6(C16H36N4)]·2.07H2O, contains one [Fe(qcq)(CN)3](-) anion, half a [Ni(teta)](2+) cation and two partially occupied inter-stitial water mol-ecules [qcq(-) is the N-(quinolin-8-yl)quinoline-2-carboxamidate anion and teta is 5,5,7,12,12,14-hexa-methyl-1,4,8,11-tetra-aza-cyclo-tetra-deca-ne]. In the complex mol-ecule, two [Fe(qcq)(CN)3](-) anions additionally coordinate the central [Ni(teta)](2+) cation through cyanide groups in a trans mode, resulting in a trinuclear structure with the Ni(2+) cation lying on an inversion centre. The two inter-stitial water mol-ecules are partially occupied, with occupancy factors of 0.528 (10) and 0.506 (9). O-H⋯O and O-H⋯N hydrogen bonding involving the two lattice water molecules and the carbonyl function and a teta N atom in an adjacent cluster leads to the formation of layers extending parallel to (010).

Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 2: 2x4 Walls

Energy Technology Data Exchange (ETDEWEB)

Kochkin, V. [Home Innovation Research Labs, Upper Marlboro, MD (United States); Wiehagen, J. [Home Innovation Research Labs, Upper Marlboro, MD (United States)

2017-06-01

Part 2 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides straightforward and cost-effective strategies to construct durable, energy-efficient walls. It addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three stories high. Walls with 2x6 framing are addressed in Part 1 of the Guide.

Construction Guide to Next-Generation High-Performance Walls in Climate Zones 3-5 - Part 2: 2x4 Walls

Energy Technology Data Exchange (ETDEWEB)

Kochkin, V. [Home Innovation Research Labs, Upper Marlboro, MD (United States); Wiehagen, J. [Home Innovation Research Labs, Upper Marlboro, MD (United States)

2017-08-31

Part 2 of this Construction Guide to High-Performance Walls in Climate Zones 3-5 provides straightforward and cost-effective strategies to construct durable, energy-efficient walls. It addresses walls constructed with 2x4 wood frame studs, wood structural panel (WSP) sheathing as wall bracing and added backing for foam sheathing, a layer of rigid foam sheathing insulation up to 1.5 inches thick over the WSP, and a cladding system installed over the foam sheathing in low-rise residential buildings up to three stories high. Walls with 2x6 framing are addressed in Part 1 of the Guide.

An investigation on the effect of gusset plate connection rigidity on the seismic behavior of special concentrically braced frames

Directory of Open Access Journals (Sweden)

Ali Esnaashari

2016-12-01

Full Text Available Special concentrically braced frames (SCBFs are commonly used to resist lateral loads in buildings. The bracing system sustains large deformations due to inelastic behavior in bracing members (buckling and yielding in tension. Generally, in the conventional modeling strategy, the effect of gusset plates in providing beam-column connections rigidity and hence, improving the post-buckling performance of these frames is not taken into account. This paper deals with the effect of gusset plate rigidity on the seismic behavior of SCBFs using Roeder’s proposed model in the literature. In this paper, four 3, 6, 9 and 12-story SCBFs were designed and modeled using two distinct methods: conventional method with hinged connections and Roeder’s method with semi-rigid connections. Then, the models behavior was investigated with both pushover analysis and nonlinear time-history analysis using OpenSees software. The results showed that lateral load capacity of the frames modeled with the Roeder’s proposed model are about 10% larger than the conventional method’s capacity. Also, it was found that the semi-rigid model leads to a less drift ratios and more overstrength factors.

Theoretical investigation of the Te4Br2 molecule in ionic liquids

International Nuclear Information System (INIS)

Elfgen, Roman; Holloczki, Oldamur; Ray, Promit; Kirchner, Barbara; Groh, Matthias F.; Ruck, Michael

2017-01-01

Material synthesis in ionic liquids, at or near room temperature, is currently a subject of immense academic interest. In order to illuminate molecular-level details and the underlying chemistry, we carried out molecular simulations of a single Te 4 Br 2 molecule dissolved in the ionic liquid 1-ethyl-3-methylimidazolium chloride, as well as in the ionic liquid mixed with aluminum chloride. Although the ethyl side chain is much too short to show detailed microheterogeneity, significant structuring with the small chloride anions is seen in case of the pure ionic liquid. In the case of the mixture, formation of larger anionic clusters is distinctly observed and analyzed. Due to the tendency of ionic liquids to dissociate, there is a pronounced shift to elongated Te-Br distances in both investigated solvents. However, only in the AlCl 3 -containing liquid, we observe the reaction of the open chain-like Te 4 Br 2 molecule to a closed square-like Te 4 Br + and AlCl 3 Br - ion. The molecular arrangement of the [Te 4 ] 2+ unit shows negligible deviation from that in the experimental crystal structure. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Optimum Design of Braced Steel Space Frames including Soil-Structure Interaction via Teaching-Learning-Based Optimization and Harmony Search Algorithms

Directory of Open Access Journals (Sweden)

Ayse T. Daloglu

2018-01-01

Full Text Available Optimum design of braced steel space frames including soil-structure interaction is studied by using harmony search (HS and teaching-learning-based optimization (TLBO algorithms. A three-parameter elastic foundation model is used to incorporate the soil-structure interaction effect. A 10-storey braced steel space frame example taken from literature is investigated according to four different bracing types for the cases with/without soil-structure interaction. X, V, Z, and eccentric V-shaped bracing types are considered in the study. Optimum solutions of examples are carried out by a computer program coded in MATLAB interacting with SAP2000-OAPI for two-way data exchange. The stress constraints according to AISC-ASD (American Institute of Steel Construction-Allowable Stress Design, maximum lateral displacement constraints, interstorey drift constraints, and beam-to-column connection constraints are taken into consideration in the optimum design process. The parameters of the foundation model are calculated depending on soil surface displacements by using an iterative approach. The results obtained in the study show that bracing types and soil-structure interaction play very important roles in the optimum design of steel space frames. Finally, the techniques used in the optimum design seem to be quite suitable for practical applications.

The influence of elastic orthotic belt on sagittal profile in adolescent idiopathic thoracic scoliosis: a comparative radiographic study with Milwaukee brace

Directory of Open Access Journals (Sweden)

Qian Bangping

2010-09-01

Full Text Available Abstract Background The effectiveness of bracing on preventing curve progression in coronal plane for mild and moderate adolescent idiopathic scoliosis (AIS patients has been confirmed by previous radiographic researches. However, a hypokyphotic effect on the sagittal plane has been reported by a few studies. A relatively increasing number of AIS patients were noticed to wear a new kind of elastic orthotic belt for the treatments of scoliosis without doctors' instructions. We postulate the correcting mechanism of this new appliance may cause flattening of the spine. To our knowledge, no study has investigated the effects of this new orthosis on the sagittal profile of AIS patients. The aim of this study was to evaluate and compare the effects of elastic orthotic belt and Milwaukee brace on the sagittal alignment in AIS patients. Methods Twenty-eight female AIS patients with mild or moderate thoracic curves were included in this study. Standing full-length lateral radiographs were obtained in three conditions: natural standing posture without any treatment, with elastic orthotic belt and with Milwaukee brace. Thoracic kyphosis (TK, lumber lordosis (LL and pelvic incidence (PI were measured and compared between the above three conditions. Results Both elastic orthotic belt and Milwaukee brace can lead to significant decrease of TK, however, the decrease of TK after wearing elastic orthotic belt is significantly larger than that after wearing Milwaukee brace. Compared with no treatment, LL was found to be significantly smaller after wearing Milwaukee brace, however, such significant decrease was not noted after wearing elastic orthotic belt. No significant changes were observed for the PI between 3 conditions. Conclusions The elastic orthotic belt could lead to more severe thoracic hypokyphosis when compared with Milwaukee brace. This belt may not be a suitable conservative method for the treatment of mild and moderate AIS patients.

Sequence-specific DNA binding activity of the cross-brace zinc finger motif of the piggyBac transposase

Science.gov (United States)

Morellet, Nelly; Li, Xianghong; Wieninger, Silke A; Taylor, Jennifer L; Bischerour, Julien; Moriau, Séverine; Lescop, Ewen; Bardiaux, Benjamin; Mathy, Nathalie; Assrir, Nadine; Bétermier, Mireille; Nilges, Michael; Hickman, Alison B; Dyda, Fred; Craig, Nancy L; Guittet, Eric

2018-01-01

Abstract The piggyBac transposase (PB) is distinguished by its activity and utility in genome engineering, especially in humans where it has highly promising therapeutic potential. Little is known, however, about the structure–function relationships of the different domains of PB. Here, we demonstrate in vitro and in vivo that its C-terminal Cysteine-Rich Domain (CRD) is essential for DNA breakage, joining and transposition and that it binds to specific DNA sequences in the left and right transposon ends, and to an additional unexpectedly internal site at the left end. Using NMR, we show that the CRD adopts the specific fold of the cross-brace zinc finger protein family. We determine the interaction interfaces between the CRD and its target, the 5′-TGCGT-3′/3′-ACGCA-5′ motifs found in the left, left internal and right transposon ends, and use NMR results to propose docking models for the complex, which are consistent with our site-directed mutagenesis data. Our results provide support for a model of the PB/DNA interactions in the context of the transpososome, which will be useful for the rational design of PB mutants with increased activity. PMID:29385532

Novel N-benzoyltyramines of Swinglea glutinosa (Rutaceae); Novas N-benzoiltiraminas de Swinglea glutinosa (Rutaceae).

Energy Technology Data Exchange (ETDEWEB)

Cerqueira, Cristovam do Nascimento; Santos, Djalma A.P. dos; Malaquias, Karla da Silva; Lima, Murilo Marinho de Castro; Silva, Maria Fatima das Gracas Fernandes da; Fernandes, Joao Batista; Vieira, Paulo Cezar, E-mail: dmfs@ufscar.br [Universidade Federal de Sao Carlos (UFSCAR), SP (Brazil). Dept. de Quimica

2012-07-01

Phytochemical studies of the leaves and fruits have led to the identification of the known amides (E)-N-methyl-cinnamamide, N-benzoyltyramine, N-benzoyl-O-geranyl tyramine, N-benzoyl-O-(4-acetoxyl)-geranyl tyramine, in addition to the new N-{l_brace}2-[4-(butoxyl-3-one)phenyl]ethyl{r_brace}benzamide, N-{l_brace}2-[4-(2,3-dihydroxy-2-methyl-butoxylanal)phenyl]ethyl{r_brace}benzamide, N-{l_brace}2-[4-(2,3-dihydroxy-2-methyl-butoxyloic) phenyl]ethyl{r_brace}benzamide, N-benzoyl-O-(4-acetoxyl-6,7-epoxy)-geranyltyramine, N-benzoyl-O-(4-acetoxyl-6,7-dihydroxy)-geranyltyramine and N-benzoyl-O-(6-acetoxyl-4,7-dihydroxy)-geranyltyramine. The isolated compounds clearly point to Swinglea phytochemical affinities with other Aurantioideae species. (author)

Healing of the Acutely Injured Anterior Cruciate Ligament: Functional Treatment with the ACL-Jack, a Dynamic Posterior Drawer Brace

Directory of Open Access Journals (Sweden)

Matthias Jacobi

2016-01-01

Full Text Available Background. The injured anterior cruciate ligament (ACL has a limited healing capacity leading to persisting instability. Hypothesis/Purpose. To study if the application of a brace, producing a dynamic posterior drawer force, after acute ACL injury reduces initial instability. Study Design. Cohort study. Methods. Patients treated with the ACL-Jack brace were compared to controls treated with primary ACL reconstruction und controls treated nonsurgically with functional rehabilitation. Measurements included anterior laxity (Rolimeter, clinical scores (Lysholm, Tegner, and IKDC, and MRI evaluation. Patients were followed up to 24 months. Results. Patients treated with the ACL-Jack brace showed a significant improvement of anterior knee laxity comparable to patients treated with ACL reconstruction, whereas laxity persisted after nonsurgical functional rehabilitation. The failure risk (secondary reconstruction necessary of the ACL-Jack group was however 21% (18 of 86 within 24 months. Clinical scores were similar in all treatment groups. Conclusion. Treatment of acute ACL tears with the ACL-Jack brace leads to improved anterior knee laxity compared to nonsurgical treatment with functional rehabilitation.

Outcome in adolescent idiopathic scoliosis after brace treatment and surgery assessed by means of the Scoliosis Research Society Instrument 24.

Science.gov (United States)

Weigert, Karen Petra; Nygaard, Linda Marie; Christensen, Finn Bjarke; Hansen, Ebbe Stender; Bünger, Cody

2006-07-01

A retrospectively designed long-term follow-up study of adolescent idiopathic scoliosis (AIS) patients who had completed treatment, of at least 2 years, by means of brace, surgery, or both brace and surgery. This study is to assess the outcome after treatment for AIS by means of the Scoliosis Research Society Outcome Instrument 24 (SRS 24). One hundred and eighteen AIS patients (99 females and 19 males), treated at the Aarhus University Hospital from January 1, 1987 to December 31, 1997, were investigated with at least 2 years follow-up at the time of receiving a posted self-administered questionnaire. Forty-four patients were treated with Boston brace (B) only, 41 patients had surgery (S), and 33 patients were treated both with brace and surgery (BS). The Cobb angles of the three treatment groups did not differ significantly after completed treatment. The outcome in terms of the total SRS 24 score was not significantly different among the three groups. B patients had a significantly better general (not treatment related) self-image and higher general activity level than the total group of surgically treated patients, while surgically treated patients scored significantly better in post-treatment self-image and satisfaction. Comparing B with BS we found a significantly higher general activity level in B patients, while the BS group had significantly higher satisfaction. There were no significant differences between BS and S patients in any of the domain scores. All treatment groups scored "fair or better" in all domain scores of the SRS 24 questionnaire, except in post-treatment function, where all groups scored worse than "fair". Improvement of appearance by means of surgical correction increases mean scores for post-treatment self-image and post-treatment satisfaction. Double-treatment by brace and surgery does not appear to jeopardize a good final outcome.

Comparison of the effect of semi-rigid ankle bracing on performance ...

African Journals Online (AJOL)

Objective. To determine the comparative proprioceptive performance of injured v. non-injured adolescent female hockey players wearing an ankle brace. Methods. Data were collected from 100 high school players who belonged to the Highway Secondary School Hockey League, KwaZulu- Natal, via voluntary parental ...

Bacterial Electrocatalysis of K4[Fe(CN)6] Oxidation

DEFF Research Database (Denmark)

Zheng, Zhiyong; Xiao, Yong; Wu, Ranran

Shewanella oneidensis MR-1 (MR-1), a model strain of electrochemically active bacteria, can transfer electrons from cell to extracellular electron acceptors including Fe(III) (hydro)oxides. It has been reported that several redox species such as cytochromes in membranes and flavins assist...... in the electron transport (ET) processes. However, the oxidization of metal compounds was barely described. Here we report electrocatalysis of K4[Fe(CN)6] oxidation by MR-1. K4[Fe(CN)6] is a redox inorganic compound and shows a reversible redox process on bare glassy carbon (GCE). This is reflected by a pair...

Syntheses, structures, and magnetic properties of three new MnII-[MoIII(CN)7]4- molecular magnets.

Science.gov (United States)

Wei, Xiao-Qin; Pi, Qian; Shen, Fu-Xing; Shao, Dong; Wei, Hai-Yan; Wang, Xin-Yi

2018-05-22

By reaction of K4[MoIII(CN)7]·2H2O, Mn(ClO4)2·6H2O and bidentate chelating ligands, three new cyano-bridged compounds, namely Mn2(3-pypz)(H2O)(CH3CN)[Mo(CN)7] (1), Mn2(1-pypz)(H2O)(CH3CN)[Mo(CN)7] (2) and Mn2(pyim)(H2O)(CH3CN)[Mo(CN)7] (3) (3-pypz = 2-(1H-pyrazol-3-yl)pyridine, 1-pypz = 2-(1H-pyrazol-1-yl)pyridine, pyim = 2-(1H-imidazol-2-yl)pyridine), have been synthesized and characterized structurally and magnetically. Single crystal X-ray analyses revealed that although the chelating ligands are different, compounds 1 to 3 are isomorphous and crystallize in the same monoclinic space group C2/m. Connected by the bridging cyano groups, one crystallographically unique [Mo(CN)7]4- unit and three crystallographically unique MnII ions of different coordination environments form similar three-dimensional frameworks, which have a four-nodal 3,4,4,7-connecting topological net with a vertex symbol of {43}{44·62}2{410·611}. Magnetic measurements revealed that compounds 1-3 display long-range magnetic ordering with critical temperatures of 64, 66 and 62 K, respectively. These compounds are rare examples of a small number of chelating co-ligand coordinated [Mo(CN)7]4--based magnetic materials. Specifically, the bidentate chelating ligands were successfully introduced into the heptacyanomolybdate system for the first time.

Outcome in adolescent idiopathic scoliosis after brace treatment and surgery assessed by means of the Scoliosis Research Society Instrument 24

OpenAIRE

Weigert, Karen Petra; Nygaard, Linda Marie; Christensen, Finn Bjarke; Hansen, Ebbe Stender; Bünger, Cody

2005-01-01

A retrospectively designed long-term follow-up study of adolescent idiopathic scoliosis (AIS) patients who had completed treatment, of at least 2 years, by means of brace, surgery, or both brace and surgery. This study is to assess the outcome after treatment for AIS by means of the Scoliosis Research Society Outcome Instrument 24 (SRS 24). One hundred and eighteen AIS patients (99 females and 19 males), treated at the Aarhus University Hospital from January 1, 1987 to December 31, 1997, were...

The effect of knee brace and knee sleeve on the proprioception of the knee in young non-professional healthy sportsmen.

Science.gov (United States)

Bottoni, G; Herten, A; Kofler, P; Hasler, M; Nachbauer, W

2013-12-01

Proprioception has been defined as the capacity to feel the position of a joint in space as sensed by the central nervous system. Prophylactic knee braces are supposed to help in knee injury prevention not just with a mechanical support of the joint but also improving proprioception. The main aim of this study was to determine the effects of a knee brace and a knee sleeve on knee proprioception. The secondary aim was to determine if different starting angles of the knee and different movement directions influence knee proprioception. We tested a group of twenty healthy male sport students without knee injuries. They were tested with the brace, with the sleeve and without support. The threshold of detection of passive knee movement with a starting knee angle of 30° and 60°, both in flexion and extension was determined. We did not find any statistically significant change in the threshold of detection of passive knee movement wearing the brace or the sleeve compared to the unsupported condition (p=0.462, α=0.05). We found a significantly lower proprioceptive sensitivity starting at the more flexed knee angle (p=0.005, α=0.05) and moving in extension than in the other test situations (p=0.001, α=0.05). Movement direction and starting position appear to influence the threshold of detection of passive knee movement. The results of this study also suggest that knee supports do not influence either positively or negatively knee proprioception of uninjured active subjects. Copyright © 2013 Elsevier B.V. All rights reserved.

Ligand-Mediated Ring → Cube Transformation in a Catalytic Subnanocluster: Co4O4(MeCN)n with n = 1-6.

Science.gov (United States)

Luo, Sijie; Dibble, Collin J; Duncan, Michael A; Truhlar, Donald G

2014-08-07

We studied the Co4O4 subnanocluster and its MeCN-coated species using density functional theory, and we found that the Co4O4 core presents distinctive structures in bare and ligand-coated species. We propose a possible ligand-mediated ring → cube transformation mechanism during the ligand-coating process of the Co4O4 core due to the stronger binding energies of the MeCN ligands to the 3D distorted cube structure than to the 2D ring and ladder structures; theory indicates that three ligands are sufficient to stabilize the cube structure. Both ring and cube structures are ferromagnetic. Our finding is potentially useful for understanding the catalysis mechanism of Co4O4 species, which have important applications in solar energy conversion and water splitting; these catalysis reactions usually involve frequent addition and subtraction of various ligands and thus possibly involve core rearrangement processes similar to our findings.

(S-2-(4-Chlorobenzoyl-1,2,3,4-tetrahydrobenzo[e]pyrazino[1,2-a][1,4]diazepine-6,12(11H,12aH-dione—Synthesis and Crystallographic Studies

Directory of Open Access Journals (Sweden)

Adam Mieczkowski

2017-10-01

Full Text Available (S-2-(4-Chlorobenzoyl-1,2,3,4-tetrahydrobenzo[e]pyrazino[1,2-a][1,4]diazepine-6,12(11H,12aH-dione was obtained in a three-step, one-pot synthesis, starting from optically pure (S-2-piperazine carboxylic acid dihydrochloride. Selective acylation of the β-nitrogen atom followed by condensation with isatoic anhydride and cyclization with HATU/DIPEA to a seven-member benzodiazepine ring, led to the tricyclic benzodiazepine derivative. Crystallographic studies and initial biological screening were performed for the title compound.

Tritellurides of comples cations: Synthesis and crystal structure of (Ba(en)/sub 3/)Te/sub 3/ and (Ba(en)/sub 4,5/)Te/sub 3/

Energy Technology Data Exchange (ETDEWEB)

Zagler, R; Eisenmann, B; Schaefer, H

1987-02-01

The two title compounds have been prepared by reaction of appropriate mixtures of the elements in ethylenediamine. The structures have been determined on the basis of single crystal data. (Ba(en)/sub 3/Te/sub 3/ crystallizes in the monoclinic system, space group P2/sub 1/c with a = 918.0(4), b = 1203.7(6), c = 1639,9(6) pm, ..beta.. = 93.4(1)/sup 0/. In the structure there are bent tritelluride anions Te/sub 3//sup 2 -/ (bond lengths 273,9-278,5 pm, bond angle (105.7/sup 0/). The Ba/sup 2 +/ cations are six coordinate by the bidentate ligand ethylenediamine. (Ba(en)/sub 4,5/)Te/sub 3/ crystallizes in the monoclinic system, space group Cc with a = 1752.8(6), b = 938.9(4), c = 3041.7(8) pm, ..beta.. = 91.3(1)/sup 0/. In this structure the bond lengths in the TE/sub 3//sup 2 -/ anions are shorter (272.1-273.1 pm, bond angles 110.9-112.2/sup 0/). The cations are coordinated by four bidentate ligands, and are connected into pairs by a further ethylenediamine molecule. The resulting dinuclear (Ba(en)/sub 4/)en(Ba(en)/sub 4/)/sup 4 +/ units have the Ba/sup 2 +/ cations in CN 9.

Ankles back in randomized controlled trial (ABrCt: braces versus neuromuscular exercises for the secondary prevention of ankle sprains. Design of a randomised controlled trial

Directory of Open Access Journals (Sweden)

Verhagen Evert ALM

2011-09-01

Full Text Available Abstract Background Ankle sprains are the most common sports and physical activity related injury. There is extensive evidence that there is a twofold increased risk for injury recurrence for at least one year post injury. In up to 50% of all cases recurrences result in disability and lead to chronic pain or instability, requiring prolonged medical care. Therefore ankle sprain recurrence prevention in athletes is essential. This RCT evaluates the effect of the combined use of braces and neuromuscular training (e.g. proprioceptive training/sensorimotor training/balance training against the individual use of either braces or neuromuscular training alone on ankle sprain recurrences, when applied to individual athletes after usual care. Methods/Design This study was designed as three way randomized controlled trial with one year follow-up. Healthy individuals between 12 and 70 years of age, who were actively participating in sports and who had sustained a lateral ankle sprain in the two months prior to inclusion, were eligible for inclusion. After subjects had finished ankle sprain treatment by means of usual care, they were randomised to any of the three study groups. Subjects in group 1 received an eight week neuromuscular training program, subjects in group 2 received a sports brace to be worn during all sports activities for the duration of one year, and group 3 received a combination of the neuromuscular training program and a sports brace to be worn during all sports activities for the duration of eight weeks. Outcomes were assessed at baseline and every month for 12 months therafter. The primary outcome measure was incidence of ankle sprain recurrences. Secondary outcome measures included the direct and indirect costs of recurrent injury, the severity of recurrent injury, and the residual complaints during and after the intervention. Discussion The ABrCt is the first randomized controlled trial to directly compare the secondary preventive

Elimination Reactions of (E)-2,4,6-Trinitrobenzaldehyde O-benzoyloximes Promoted by R2NH in MeCN. Change of Reaction Mechanism

International Nuclear Information System (INIS)

Cho, Bong Rae; Pyun, Sang Yong

2010-01-01

We have studied the nitrile-forming elimination reactions from 1 promoted by R 2 NH in MeCN. The reaction proceeded by (E1cb) irr mechanism. Change of the β-aryl group from 2,4-dinitrophenyl to a more strongly electron-withdrawing 2,4,6-trinitrophenyl increased the reaction rate by 470-fold, shifted the transition state toward more reactant-like, and changed the reaction mechanism from E2 to (E1cb) irr . To the best of our knowledge, this is the first example of nitrile-forming elimination reaction that proceeds by the (E1cb) irr mechanism in MeCN. Noteworthy is the carbanion stabilizing ability of the 2,4,6-trinitrophenyl group in aprotic solvent. Nitrile-forming elimination reactions of (E)-benzaldoxime derivatives have been extensively investigated under various conditions. The reactions proceeded by the E2 mechanism in MeCN despite the fact that the reactants have syn stereochemistry, poor leaving, and sp 2 hybridized β-carbon atom, all of which favor E1cb- or E1cb-like transition state. Moreover, the transition state structures were relatively insensitive to the variation of the reactant structures. The results have been attributed to the poor anion solvating ability of MeCN, which favors E2 transition state with maximum charge dispersal. For eliminations from strongly activated (E)-2,4-(NO 2 ) 2 C 6 H 3 CH=NOC(O)C 6 H 4 X, a change in the reaction mechanism from E2 to (E1cb) irr was observed as the base-solvent was changed from R 2 NH in MeCN to R 2 NH/R 2 NH 2 + in 70 mol % MeCN(aq). A combination of a strong electron-withdrawing β-aryl group and anion-solvating protic solvent was required for the mechanistic change

Effect of K?nes?otap?ng and Knee Brace on Funct?onal Performance in Recreat?onal Athletes

OpenAIRE

Ulusoy, Burak; ?ldiz, B?lent; Tunay, Volga Bayrak??

2014-01-01

Objectives: Kinesiotaping is a popular taping method that is used for both therapeutic and performance enchancement purposes. Knee braces are widely used for prevention in sport injuries but their performance effectiveness is still controversial. The aim of this study was to determine whether kinesiotape or brace was more effective on functional performance. Methods: A total twenty male recreational football players (Mean?Standart Deviation (SD) age: 22.5?0.68 years, height: 175.15?3.37 cm, b...

Effect of Semi-Rigid and Soft Ankle Braces on Static and Dynamic Postural Stability in Young Male Adults

Directory of Open Access Journals (Sweden)

Noriaki Maeda, Yukio Urabe, Shogo Tsutsumi, Shuhei Numano, Miho Morita, Takuya Takeuchi, Shou Iwata, Toshiki Kobayashi

2016-06-01

Full Text Available Ankle braces have been suggested to protect ankle joints from a sprain by restricting inversion and improving proprioception. However, the difference in effects between a semi-rigid brace and a soft brace regarding dynamic postural control after landing is not known. The aim of the present study was to compare the effect of soft (SB and semi-rigid (SRB ankle braces on static and dynamic postural stability in healthy young men. Altogether, 21 male adults (mean age 24.0 ± 1.5 years were assessed for one leg while wearing non-brace (NB, SB or SRB. Balance in single-limb stance on a single-force platform with open eyes and closed eyes were assessed for the non-dominant leg under SB, SRB, and NB conditions. Locus length/second (mm/s and the enveloped area (mm·s-2 surrounded by the circumference of the wave pattern during postural sway were calculated. For assessing dynamic postural stability, the participant jumped and landed on one leg on a force platform, and the Dynamic Postural Stability Index (DPSI and the maximum vertical ground reaction force (vGRFmax were measured. The data were compared among the three conditions with repeated-measures analysis of variance. The correlations between locus length/second, enveloped area, DPSI values (DPSI, Anterior-Posterior Stability Index, Medial-Lateral Stability Index, and Vertical Stability Index, and vGRFmax were then calculated. The results indicated that locus length/second and enveloped area with open eyes and closed eyes were not significantly different for each condition. However, a significant lower in the DPSI and Vertical Stability Index were observed with the SRB in comparison to the SB and NB. A significant improvement in vGRFmax was also observed with the SRB in comparison to NB. SRB demonstrated a positive effect on dynamic postural stability after landing on a single leg and may improve balance by increasing dynamic postural stability.

Radiochemical synthesis of etomoxir

Energy Technology Data Exchange (ETDEWEB)

Abbas, Hafiz G. [Institute of Nuclear Medicine and Oncology (INMOL), New Campus Road, Lahore (Pakistan); Yunus, M. [University of the Punjab, New Campus Road, Lahore (Pakistan); Feinendegen, Ludwig E., E-mail: feinendegen@gmx.ne [Department of Nuclear Medicine, Heinrich-Heine University Duesseldorf, Wannental 45, 88131 Lindau (Germany)

2011-02-15

Sodium 2-{l_brace}6-(4-chlorophenoxy)hexyl{r_brace}oxirane-2-carboxylate (Etomoxir) inhibits transport of fatty acids via the carnitine shuttle into mitochondria of muscle cells and prevents long chain fatty acids from providing energy through {beta}-oxidation especially for muscle contraction. The objective of this synthesis is to develop a method for radioiodination of Etomoxir in order to explore its potential in diagnostic metabolic studies and molecular imaging. Thus, a method is described for the radiochemical synthesis and purification of ethyl 2-{l_brace}6-(4-[{sup 131}I]iodophenoxy)hexyl{r_brace}oxirane-2-carboxylate (3) and 2-{l_brace}6-(4-[{sup 131}I]iodo-phenoxy)hexyl{r_brace}oxirane-2-carboxylic acid (4). For the synthesis of these new agents, ethyl 2-{l_brace}6-(4-bromophenoxy)hexyl{r_brace}oxirane-2-carboxylate (1) and 2-{l_brace}6-(4-bromophenoxy)hexyl{r_brace}oxirane-2-carboxylic acid (2) were refluxed with [{sup 131}I]NaI in the presence of anhydrous acetone at a temperature of 80 {sup o}C and 90 {sup o}C for a period of 3-4 hours, respectively. The method of radiolabeling, based on the nucleophilic exchange reaction, resulted in a radiochemical yield of 43% and 67% for compounds 3 and 4, respectively. This paper reports on the labeling of etomoxir with radioiodine as {sup 124}I labeled etomoxir may be of great importance in molecular imaging.

A combined crossed molecular beams and theoretical study of the reaction CN + C2H4

International Nuclear Information System (INIS)

Balucani, Nadia; Leonori, Francesca; Petrucci, Raffaele; Wang, Xingan; Casavecchia, Piergiorgio; Skouteris, Dimitrios; Albernaz, Alessandra F.; Gargano, Ricardo

2015-01-01

Highlights: • The CN + C 2 H 4 reaction was investigated in crossed beam experiments. • Electronic structure calculations of the potential energy surface were performed. • RRKM estimates qualitatively reproduce the experimental C 2 H 3 NC yield. - Abstract: The CN + C 2 H 4 reaction has been investigated experimentally, in crossed molecular beam (CMB) experiments at the collision energy of 33.4 kJ/mol, and theoretically, by electronic structure calculations of the relevant potential energy surface and Rice–Ramsperger–Kassel–Marcus (RRKM) estimates of the product branching ratio. Differently from previous CMB experiments at lower collision energies, but similarly to a high energy study, we have some indication that a second reaction channel is open at this collision energy, the characteristics of which are consistent with the channel leading to CH 2 CHNC + H. The RRKM estimates using M06L electronic structure calculations qualitatively support the experimental observation of C 2 H 3 NC formation at this and at the higher collision energy of 42.7 kJ/mol of previous experiments

Results from the BRACE 1.5 study: Climate change impacts of 1.5 C and 2 C warming

Science.gov (United States)

O'Neill, B. C.; Anderson, B.; Monaghan, A. J.; Ren, X.; Sanderson, B.; Tebaldi, C.

2017-12-01

In 2015, 195 countries negotiated the Paris Agreement on climate change, which set long-term goals of limiting global mean warming to well below 2 C and possibly 1.5 C. This event stimulated substantial scientific interest in climate outcomes and impacts on society associated with those levels of warming. Recently, the first set of global climate model simulations explicitly designed to meet those targets were undertaken with the Community Earth System Model (CESM) for use by the research community (Sanderson et al, accepted). The BRACE 1.5 project models societal impacts from these climate outcomes, combined with assumptions about future socioeconomic conditions according to the Shared Socioeconomic Pathways. These analyses build on a recently completed study of the Benefits of Reduced Anthropogenic Climate changE (BRACE), published as a set of 20 papers in Climatic Change, which examined the difference in impacts between two higher scenarios resulting in about 2.5 C and 3.7 C warming by late this century. BRACE 1.5 consists of a set of six papers to be submitted to a special collection in Environmental Research Letters that takes a similar approach but focuses on impacts at 1.5 and 2 C warming. We ask whether impacts differ substantially between the two climate scenarios, accounting for uncertainty in climate outcomes through the use of initial condition ensembles of CESM simulations, and in societal conditions by using alternative SSP-based development pathways. Impact assessment focuses on the health and agricultural sectors; modeling approaches include the use of a global mutli-region CGE model for economic analysis, both a process-based and an empirical crop model, a model of spatial population change, a model of climatic suitability for the aedes aegypti mosquito, and an epidemiological model of heat-related mortality. A methodological analysis also evaluates the use of climate model emulation techniques for providing climate information sufficient to

Risk Factors for Parachute Injuries and Airborne Student Observations on the Parachute Ankle Brace

National Research Council Canada - National Science Library

Knapik, Joseph J; Spiess, Anita; Darakjy, Salima; Grier, Tyson; Manning, Fred; Livingston, Elaine; Swedler, David; Amoroso, Paul; Jones, Bruce H

2007-01-01

...) of the Defense Safety Oversight Council (DSOC) to evaluate the parachute ankle brace (PAB). Information provided by the questionnaire identified potential injury risk factors and comments on the PAB...

Dose, image quality and spine modeling assessment of biplanar EOS micro-dose radiographs for the follow-up of in-brace adolescent idiopathic scoliosis patients.

Science.gov (United States)

Morel, Baptiste; Moueddeb, Sonia; Blondiaux, Eleonore; Richard, Stephen; Bachy, Manon; Vialle, Raphael; Ducou Le Pointe, Hubert

2018-05-01

The aim of this study was to compare the radiation dose, image quality and 3D spine parameter measurements of EOS low-dose and micro-dose protocols for in-brace adolescent idiopathic scoliosis (AIS) patients. We prospectively included 25 consecutive patients (20 females, 5 males) followed for AIS and undergoing brace treatment. The mean age was 12 years (SD 2 years, range 8-15 years). For each patient, in-brace biplanar EOS radiographs were acquired in a standing position using both the conventional low-dose and micro-dose protocols. Dose area product (DAP) was systematically recorded. Diagnostic image quality was qualitatively assessed by two radiologists for visibility of anatomical structures. The reliability of 3D spine modeling between two operators was quantitatively evaluated for the most clinically relevant 3D radiological parameters using intraclass correlation coefficient (ICC). The mean DAP for the posteroanterior and lateral acquisitions was 300 ± 134 and 433 ± 181 mGy cm 2 for the low-dose radiographs, and 41 ± 19 and 81 ± 39 mGy cm 2 for micro-dose radiographs. Image quality was lower with the micro-dose protocol. The agreement was "good" to "very good" for all measured clinical parameters when comparing the low-dose and micro-dose protocols (ICC > 0.73). The micro-dose protocol substantially reduced the delivered dose (by a factor of 5-7 compared to the low-dose protocol) in braced children with AIS. Although image quality was reduced, the micro-dose protocol proved to be adapted to radiological follow-up, with adequate image quality and reliable clinical measurements. These slides can be retrieved under Electronic Supplementary Material.

Dihydroxylation of 4-substituted 1,2-dioxines

DEFF Research Database (Denmark)

Robinson, Tony V; Pedersen, Daniel Sejer; Taylor, Dennis K

2009-01-01

The synthesis of 2-C-branched erythritol derivatives, including the plant sugar (+/-)-2-C-methylerythritol 2, was achieved through a dihydroxylation/reduction sequence on a series of 4-substituted 1,2-dioxines 3. The asymmetric dihydroxylation of 1,2-dioxines was examined, providing access...... to optically enriched dihydroxy 1,2-dioxanes 4. The synthesized 1,2-dioxanes were converted to other erythro sugar analogues and tetrahydrofurans through controlled cleavage of the endoperoxide linkage....

Solid solutions on the base of CuCr2Se4 and CUsUb(1/2)Insub(1/2)Crsub(2)Sesub(4)

International Nuclear Information System (INIS)

Smirnov, S.G.; Rozantsev, A.V.; Kesler, Ya.A.; Gordeev, I.V.; Tret'yakov, Yu.D.

1983-01-01

The CuCr 2 Se 4 interaction with Cusub(1/2)Insub(1/2)Crsub(2)Sesub(4) for determining the fields of solid solutions existence and studying their crystallochemical properties is investigated. Solid solutions of the (1-x)Cusub(1/2)Insub(1/2)Crsub(2)Sesub(4)xxCuCrsub(2)Sesub(4) are prepared, two limited regions of solid solutions of spinel type at 0 <= x <= 0.2 and 0.8 <= x <= 1 are determined. X-ray radiography investigation of synthesized solid solutions is carried out. It has been found that at 0 <= x <= 0.2 solid solutions are crystallized in the ordered spinel structure F anti 43m

Soft-plastic brace for lower limb fractures in patients with spinal cord injury.

Science.gov (United States)

Uehara, K; Akai, M; Kubo, T; Yamasaki, N; Okuma, Y; Tobimatsu, Y; Iwaya, T

2013-04-01

Retrospective study at a rehabilitation center. Patients with spinal cord injury, even if they are wheelchair users, sometimes suffer from fractures of the lower limb bones. As their bones are too weak to have surgery, and because a precise reduction is not required for restoration, such patients are often indicated for conservative treatment. This case series study investigated the use of a hinged, soft-plastic brace as a conservative approach to treating fractures of the lower extremities of patients with spinal cord injury. National Rehabilitation Center, Japan. Fifteen patients (male, n=10; female, n=5; average age, 52.7 years) with 19 fractures of the femur or the tibia who were treated with a newly-developed hinged, soft-plastic brace were studied. All of them used wheelchairs. We analyzed the time taken for fracture union and for wearing orthotics, degree of malalignment, femorotibial angle and side effects. The fractures in this series were caused by relatively low-energy impact. The average time taken for fracture union was 80.1 (37-189) days, and the average amount of time spent wearing orthotics was 77.9 (42-197) days. On final X-ray imaging, the average femorotibial angle was 176.9° (s.d. ±8.90), and 15° of misalignment in the sagittal plane occurred in one patient. A hinged, soft-plastic brace is a useful option as a conservative approach for treating fractures of the lower extremities in patients with spinal cord injury.

Cost effectiveness of brace, physiotherapy, or both for treatment of tennis elbow

NARCIS (Netherlands)

Struijs, P. A. A.; Korthals-de Bos, I. B. C.; van Tulder, M. W.; van Dijk, C. N.; Bouter, L. M.; Assendelft, W. J. J.

2006-01-01

BACKGROUND: The annual incidence of tennis elbow in the general population is high (1-3%). Tennis elbow often leads to limitation of activities of daily living and work absenteeism. Physiotherapy and braces are the most common treatments. OBJECTIVES: The hypothesis of the trial was that no

Design Optimization of Long-Span Cold-Formed Steel Portal Frames Accounting for Effect of Knee Brace Joint Configuration

OpenAIRE

Thanh Duoc Phan; James B. P. Lim; Meheron Selowara Joo; Hieng-Ho Lau

2017-01-01

The application of cold-formed steel channel sections for portal frames becomes more popular for industrial and residential purposes. Experimental tests showed that such structures with long-span up to 20 m can be achieved when knee brace joints are included. In this paper, the influence of knee brace configuration on the optimum design of long-span cold-formed steel portal frames is investigated. The cold-formed steel portal frames are designed using Eurocode 3 under ultimate limit states. A...

Efficacy of b-lynch brace suture in postpartum haemorrhage

International Nuclear Information System (INIS)

Tarique, S.; Wazir, S.; Moeen, G.

2011-01-01

Massive uncontrolled haemorrhage after childbirth is the leading cause of maternal death in developing countries. Postpartum haemorrhage is traditionally defined as blood loss of more than 500 ml after vaginal delivery and more than 1000 ml after caesarean section, but intraoperative estimation of blood loss is inaccurate. Uterine atony alone accounts for 75 - 90% of PPH. To estimate the effectiveness and safety of B-Lynch brace Suture in the management of primary postpartum haemorrhage (PPH). (author)

Oxygen-doped Sb{sub 4}Te phase change films for high-temperature data retention and low-power application

Energy Technology Data Exchange (ETDEWEB)

Hu, Yifeng [Functional Materials Research Laboratory, Tongji University, Shanghai 200092 (China); School of Mathematics and Physics, Jiangsu Teachers University of Technology, Changzhou 213001 (China); Sun, Mingcheng [Functional Materials Research Laboratory, Tongji University, Shanghai 200092 (China); Song, Sannian; Song, Zhitang [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Micro-System and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); Zhai, Jiwei, E-mail: apzhai@tongji.edu.cn [Functional Materials Research Laboratory, Tongji University, Shanghai 200092 (China)

2013-02-25

Highlights: Black-Right-Pointing-Pointer O-doped Sb{sub 4}Te phase-change films were reported. Black-Right-Pointing-Pointer The amorphous-to-crystalline transitions of O-doped Sb{sub 4}Te films were studied. Black-Right-Pointing-Pointer By doping oxygen, the stability of Sb{sub 4}Te films is improved greatly. Black-Right-Pointing-Pointer The resistance of the Sb{sub 4}Te films increases by doping oxygen. - Abstract: The amorphous-to-crystalline transitions of oxygen-doped Sb{sub 4}Te (STO) films are investigated by in situ film resistance measurements. The crystalline temperature and resistance of the oxygen-doped films increase. The analysis of X-ray diffractomer (XRD) and X-ray photoelectron spectroscopy (XPS) indicate that the films with doping of a small amount of oxygen atoms can refine the grain size and form oxide, improving the resistance and thermal stability of phase change films. Excessive oxygen in Sb{sub 4}Te will make Te separate, resulting in deteriorating the stability. As a result, STO2 film has the relatively high activation energy for crystallization. The 10-year lifetime is raised from 29 Degree-Sign C of undoped Sb{sub 4}Te film to 102 Degree-Sign C of STO3 film. Phase transition from amorphous state to crystalline state is observed at relatively lower power, compared with a device using Ge{sub 2}Sb{sub 2}Te{sub 5} film.

Vibrational frequencies and structural investigation of (M(CN)4)2- (M Cd, Hg and Zn) ions

International Nuclear Information System (INIS)

Gurkan, Keshan; Tomas, Polivka; Cemal, Parlak; Mustafa, Shenyel

2011-01-01

The normal mode frequencies and corresponding vibrational assignments of tetracyanometallate (II) ions ([M(CN) 4 ] 2 -, M = Cd, Hg and Zn) have been theoretically examined by means of standard quantum chemical techniques. All normalmodes have been successfully assigned to one of six types of motion utilizing the T d symmetry of M(CN) 4 2 -. Calculations have been performed at the Becke-3-Lee-Yang-Parr (B3LYP) density functional method using the Lanl2dz effective core basis set. Furthermore, reliable vibrational assignments have been made on the basis of potential energy distribution (PED) calculated and the thermodynamics functions, highest occupied and lowest unoccupied molecular orbitals (HOMO and LUMO) of the title ions have been predicted together with their infrared intensities and Raman activities. Theoretical results have been successfully compared against available experimental data

Exfoliation of GaAs caused by MeV 1H and 4He ion implantation at left angle 100 right angle , left angle 110 right angle axial and random orientations

International Nuclear Information System (INIS)

Rauhala, E.; Raeisaenen, J.

1994-01-01

The exfoliation procedure of the ion range determination of gaseous implants in single crystal GaAs is investigated. The correlation of the observed crater depth with the ion range is studied for random, left angle 100 right angle and left angle 110 right angle axial orientation high dose implantations of 1.5-2.5 MeV 1 H and 4 He ions. Depending on the experimental conditions, the crater depths corresponded to range values between the modal range and the range maximum. The observed crater depths could be related to the actual He concentration depth distributions by determining the profiles of the 4 He implants by 2.7 MeV proton backscattering. The implantation parameters affecting the exfoliation process, and especially the increase rate of the sample temperature, are investigated. The range distribution parameters for the 1.5 MeV 4 He implants are presented. ((orig.))

Validation Test Report for the Automated Optical Processing System (AOPS) Version 4.12

Science.gov (United States)

2015-09-03

Sensor (SeaWiFS), Moderate Resolution Imaging Spectrometers ( MODIS on Aqua), and Medium Resolution Imaging Spectrometer (MERIS). This VTR documents...the MOBY site. 3.2.1 Image to Image Comparison The AOPS v4.12 upgrades are detailed in Section 2 System Description. Figure 5 shows the MODIS ...bottom images were processed with AOPS v4.12; MODIS imagery on the left and VIIRS on the right. The most significant change in the VIIRS imagery is

Rate constants of the equilibrium reactions SO⨪4 + HNO3 ⇄ HSO-4 + NO3 and SO⨪4 + NO-3 ⇄ SO2-4 + NO3

DEFF Research Database (Denmark)

Løgager, T.; Sehested, K.; Holcman, J.

1993-01-01

Rate constants of the following equilibrium reactions were determined by pulse radiolysis at high solute concentrations: SO4.- + HNO, half arrow right over half arrow left HSO4- + NO3. [k(f) = (2.7 +/- 0.5) x 10(6) M-1 s-1, k(r) = (5.6 +/- 1.0) x 10(3) M-1 s-1] and SO4.- + NO3- half arrow right...

Aging effect in CaLaBa{l_brace}Cu{sub 1 - x}Fe{sub x}{r_brace}{sub 3}O{sub 7 - {delta}} with 0 {<=} x {<=} 0.07 studied by Moessbauer spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Bustamante, Angel, E-mail: angelbd1@gmail.com [Universidad Nacional Mayor de San Marcos, Laboratorio de Ceramicos y Nanomateriales, Facultad de Ciencias Fisicas (Peru); Santos Valladares, Luis De Los, E-mail: ld301@cam.ac.uk [University of Cambridge, Cavendish Laboratory (United Kingdom); Flores, Jesus [Universidad Nacional Mayor de San Marcos, Laboratorio de Ceramicos y Nanomateriales, Facultad de Ciencias Fisicas (Peru); Barnes, Crispin H. W. [University of Cambridge, Cavendish Laboratory (United Kingdom); Majima, Yutaka [Tokyo Institute of Technology, Materials and Structures Laboratory (Japan)

2011-11-15

In this work, we study the long-term aging effect caused by Fe atoms in the superconductor CaLaBa{l_brace}Cu{sub 1 - x}Fe{sub x}{r_brace}{sub 3}O{sub 7 - {delta}} with 0 {<=} x {<=} 0.07. XRD confirms that this system has a YBCO-like structure. The critical temperature (T{sub c}) is strongly affected by aging and depends on the amount of Fe in the structure. Room temperature Moessbauer spectroscopy reveals the presence of the typical species A, B-B Prime , C and new species E Prime and F. Interestingly; A, which corresponds to the Fe{sup 3 + } atom located in the Cu(1) of the chains with spin S{sub z} = 3/2, shows a drastic reduction which means migration to the species B, B Prime and C. Species B and B Prime correspond to the Fe{sup 3 + } in the Cu(2) site forming planar quasi-octahedral and planar square pyramidal, while the C specie is a square pyramidal with O(5) respectively (spin S{sub z} = 3/2 in all these cases). Aging causes loss of superconductivity in the samples with 5 and 7% of iron content.

(2,4-Dioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylato-κ2O4,O5(4-oxido-2-oxo-1,2-dihydropyrimidine-5-carboxylato-κ2O4,O5bis(1,10-phenanthroline-κ2N,N′yttrium(III dihydrate

Directory of Open Access Journals (Sweden)

Zilu Chen

2008-09-01

Full Text Available In the title compound, [Y(C5H2N2O4(C5H3N2O4(C12H8N22]·2H2O, the YIII ion lies on a twofold rotation axis and exhibits a distorted square-antiprismatic coordination geometry. It is chelated by two 1,10-phenanthroline ligands, a 2,4-dioxo-1,2,3,4-tetrahydropyrimidine-5-carboxylate monoanion and a 4-oxido-2-oxo-1,2-dihydropyrimidine-5-carboxylate dianion. The H atom involved in an N—H...N hydrogen bond between the 1,2-dihydropyrimidine units has half occupancy and is disordered around a twofold rotation axis.

Synthesis, characterization, and tuning of the liquid crystal properties of ionic materials based on the cyclic polyoxothiometalate [{Mo4O4S4(H2O)3(OH)2}2(P8W48O184)](36-).

Science.gov (United States)

Watfa, Nancy; Floquet, Sébastien; Terazzi, Emmanuel; Haouas, Mohamed; Salomon, William; Korenev, Vladimir S; Taulelle, Francis; Guénée, Laure; Hijazi, Akram; Naoufal, Daoud; Piguet, Claude; Cadot, Emmanuel

2015-02-14

A series of compounds resulting from the ionic association of a nanoscopic inorganic cluster of formula [K2NaxLiy{Mo4O4S4(OH)2(H2O)3}2(HzP8W48O184)]((34-x-y-z)-), 1, with several organic cations such as dimethyldioctadecylammonium DODA(+), trimethylhexadecylammonium TMAC16(+), alkylmethylimidazoliums mimCn(+) (n = 12-20) and alkyl-dimethylimidazoliums dmimCn(+) (n = 12 and 16) was prepared and characterized in the solid state by FT-IR, EDX, Elemental analysis, TGA and solid state NMR. The solid state NMR experiments performed on (1)H, (13)C and (31)P nuclei evidenced the interactions between the cations and 1 as well as the organization of the alkyl chains of the cations within the solid. Polarized optical microscopy, DSC and SA-XRD experiments implicated mesomorphic phases for DODA(+) and mimCn(+) salts of 1. The crystallographic parameters were determined and demonstrated that the inter-lamellar spacing could be controlled upon changing the length of the alkyl chain, a very interesting result if we consider the huge size of the inorganic cluster 1 and the simple nature of the cations.

Synthesis, structures and properties of a series of manganese coordination complexes constructed from dicarboxylic fluorene derivatives

Energy Technology Data Exchange (ETDEWEB)

Li Xing, E-mail: lixing@nbu.edu.cn [State Key Laboratory Base of Novel Functional Materials and Preparation Science, Faculty of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang, 315211 (China); Zhao Xiuhua; Bing Yue; Zha Meiqin; Xie Hongzhen; Guo Zhiyong [State Key Laboratory Base of Novel Functional Materials and Preparation Science, Faculty of Materials Science and Chemical Engineering, Ningbo University, Ningbo, Zhejiang, 315211 (China)

2013-01-15

Assembly reactions of 9,9-diethylfluorene-2,7-dicarboxylic acid (H{sub 2}DFDC) and Mn(CH{sub 3}COO){sub 2}{center_dot}4H{sub 2}O or MnCl{sub 2}{center_dot}4H{sub 2}O by tuning of various secondary ligands such as 2,2 Prime -bipyridine (2,2 Prime -bpy), 4,4 Prime -bipyridine (4,4 Prime -bpy) or 1,3-bis(4-pyridyl)propane) (bpp), gave rise to four complexes {l_brace} [Mn{sub 2}(DFDC){sub 2}(DMF){sub 2}]{center_dot}H{sub 2}O{r_brace} {sub n} (1), [Mn(DFDC)(2,2 Prime -bpy)]{sub n} (2), {l_brace} [Mn{sub 2}(DFDC){sub 2}(4,4 Prime -bpy){sub 2}]{center_dot}2CH{sub 3}OH{r_brace} {sub n} (3), and {l_brace} [Mn{sub 4}(DFDC){sub 4}(bpp){sub 2}(CH{sub 3}OH){sub 3} (H{sub 2}O){sub 3}]{center_dot}3(CH{sub 3}OH){center_dot}3(H{sub 2}O){r_brace} {sub n} (4). Single crystal X-ray diffraction analysis reveal that complex 1 is three dimensional structure with rhombic channels filled by guest water molecules; 2 presents a close-packed structure with high thermal stability; 3 exhibits a three dimensional framework with micro-porous channels filled by guest methanol molecules and 4 is a two-dimensional structure. The photoluminescent properties of 1-4 have been studied, respectively, showing that the Mn(II) ions, accessorial organic ligands or crystal structures exert important influences on the photoluminescence emissions of H{sub 2}DFDC ligands. Thermogravimetric analysis show that the complexes have remarkably high thermal stability. Magnetic susceptibility measurements have been finished and discussed for the complexes. - Graphical abstract: Assembly of 9,9-diethylfluorene-2,7-dicarboxylic acid and Mn(II) salts by tuning of various accessorial ligands resulted in four manganese complexes with different topological frameworks. Highlights: Black-Right-Pointing-Pointer Four manganese complexes based on 9,9-diethylfluorene-2,7-dicarboxylic acid were obtained. Black-Right-Pointing-Pointer The complexes were structurally characterized by single-crystal X-ray diffraction. Black-Right

Photoinduced self-assembly to lanthanide-containing molybdenum-blue superclusters and molecular design

Energy Technology Data Exchange (ETDEWEB)

Yamase, Toshihiro [Chemical Resources Laboratory, Tokyo Institute of Technology, R1-21, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan) and Core Research for Evolutional Science and Technology (CREST), Japan Science and Technology Agency (JST), 4-1-8 Honcho, Kawaguchi 332-0012 (Japan)]. E-mail: tyamase@res.titech.ac.jp; Ishikawa, Eri [Chemical Resources Laboratory, Tokyo Institute of Technology, R1-21, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Core Research for Evolutional Science and Technology (CREST), Japan Science and Technology Agency (JST), 4-1-8 Honcho, Kawaguchi 332-0012 (Japan); Abe, Yohko [Chemical Resources Laboratory, Tokyo Institute of Technology, R1-21, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Core Research for Evolutional Science and Technology (CREST), Japan Science and Technology Agency (JST), 4-1-8 Honcho, Kawaguchi 332-0012 (Japan); Yano, Yutaka [Chemical Resources Laboratory, Tokyo Institute of Technology, R1-21, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Core Research for Evolutional Science and Technology (CREST), Japan Science and Technology Agency (JST), 4-1-8 Honcho, Kawaguchi 332-0012 (Japan)

2006-02-09

The prolonged photolysis of aqueous solutions containing [Mo{sub 36}O{sub 112}(H{sub 2}O){sub 16}]{sup 8-}, [ {sup i}PrNH{sub 3}]{sup +} (or [p-CH{sub 3}C{sub 6}H{sub 4}SO{sub 2}]{sup -}), and LaCl{sub 3} at pH = 1 leads to the formation of 28-electron reduced [Mo{sub 28} {sup V}Mo{sub 122} {sup VI}O{sub 452}H{sub 2}(H{sub 2}O){sub 66}{l_brace}La(H{sub 2}O){sub 5}{r_brace}{sub 2}]{sup 24-} ({identical_to}{l_brace}Mo{sub 15}(La){sub 2}{r_brace}) or 24-electron reduced [Mo{sub 24} {sup V}Mo{sub 96} {sup VI}O{sub 366}H{sub 14}(H{sub 2}O){sub 48}{l_brace}La(H{sub 2}O){sub 5}{r_brace}{sub 6}]{sup 4-} ({identical_to}{l_brace}Mo{sub 12}(La){sub 6}{r_brace}) molybdenum-blue nano-ring which depends on the electron donor species. The former is of the ellipsoidal structure with approximately 35 and 32 A for the outer ring diameters and 25 and 20 A for the inner ring diameters. The latter is of the Japanese rice-ball shape with approximately 30 and 17 A for outer and inner ring diameters, respectively. All the La{sup 3+} sites are coordinated into the inner rings with replacement of [Mo(H{sub 2}O)O{sub 2}({mu}-O)Mo(H{sub 2}O)O{sub 2}]{sup 2+} ({identical_to}{l_brace}Mo{sub 2}{r_brace}-linker) groups. Each LaO{sub 9} site exhibits the distorted tricapped-trigonal-prismatic geometry which consists of four two-coordinate oxygen atoms from {l_brace}Mo{sub 15}{r_brace} and {l_brace}Mo{sub 12}{r_brace} frameworks and five aqua oxygen atoms, with 2.46-2.62 A of La-O bond-lengths. The topology of {l_brace}Mo{sub 15}(La){sub 2}{r_brace} and {l_brace}Mo{sub 12}(La){sub 6}{r_brace} structures shows that the Ln{sup 3+}-incorporated sub-blocks {l_brace}Mo{sub 1}(La){r_brace}and {l_brace}Mo{sub 11}(La){r_brace} in rings possess large molecular curvature with {omega} {sub 1} {approx} 157{sup o} and {omega} {sub 3} {approx} 154{sup o} compared to {l_brace}Mo{sub 1}{r_brace}and {l_brace}Mo{sub 11}{r_brace} with {omega} {sub 1} {approx} 158-159{sup o} and {omega} {sub 3} {approx} 158{sup o

On the effect of the near field records on the steel braced frames equipped with energy dissipating devices

Directory of Open Access Journals (Sweden)

Mahmoud Bayat

Full Text Available The behavior of braced steel frame structures is of special importance due to its extensive use. Also the application of active and semi-active control systems, regarding to their benefits in obtaining better seismic performance has increased significantly. The majority of the works on steel structures and steel connections has been done under far field records, and the behavior of steel frame structures equipped with yielding dampers under these circumstances has not yet been fully analyzed. The main purpose of this paper is to determine the behavior of structures equipped with yielding dampers, located in near field based on energy concepts. In order to optimize their seismic behavior, the codes and solutions are also presented.The selected system is a braced steel frame system which is equipped with yielding dampers and the analysis is performed using the "Perform 3D V.4" software and the conclusions are drawn upon energy criterion. The effect of PGA variation and height of the frames are also considered in the study .Finally, using the above mentioned results, a proper solution is presented for typical systems in order to increase the energy damping ability and reduce the destructive effects in structures on an earthquake event, so that a great amount of induced energy is damped and destruction of the structure is prevented as much as possible.

Influence of the Soil-Structure Interaction on the Design of Steel-Braced Building Foundation

International Nuclear Information System (INIS)

Azarbakht, Alireza; Ashtiany, Mohsen Ghafory

2008-01-01

The modeling and analysis of the superstructure and the foundation for the seismic lateral loads are traditionally done separately. This assumption is an important issue in the design/rehabilitate procedures especially for the short period structures, i.e. steel braced or shear wall systems, which may result to a conservative design. By using more advance procedures, i.e. nonlinear static method, and the incorporation of the soil-structure interaction (SSI), the seismic demand in the lateral resisting system decreases and the design will become more economic. This paper includes an investigation about the influence of the SSI effect on the design of the steel-braced building foundation. The presented example is a three-bay three-storey steel braced frame. Three design methods based on the FEMA 356 guideline and the UBC 97 code are taken in to consideration. The three methods are: (1) linear static analysis based on the UBC 97 code assuming the fixed based condition; (2) linear static analysis based on the FEMA 356 guideline assuming the fixed based condition; and (3) nonlinear static analysis assuming both fixed and flexible based assumptions. The results show that the influence of the SSI on the input demand of the short period building foundations is significant and the foundation design based on the linear static method with the fixed base assumption is so conservative. A simple method is proposed to take the SSI effect in to consideration in the linear static procedure with the fixed base assumption, which is a common method for the engineers. The advantage of this proposed method is the simplicity and the applicability for the engineering purposes

Spectral and quantum chemical studies on 1,3-bis(N(1)-4-amino-6-methoxypyrimidinebenzenesulfonamide-2,2,4,4-ethane-1,2-dithiol)-2,4-dichlorocyclodiphosph(V)azane and its erbium complex.

Science.gov (United States)

Al-Mogren, Muneerah M; Alaghaz, Abdel-Nasser M A; El-Gogary, Tarek M

2014-01-24

Novel 1,3-bis(N(1)-4-amino-6-methoxypyrimidine-benzenesulfonamide-2,2,4,4-ethane-1,2-dithiol)-2,4-dichlorocyclodiphosph(V)azane (L), was prepared and their coordinating behavior towards the lanthanide ion Er(III) was studied. The structures of the isolated products are proposed based on elemental analyses, IR, UV-VIS., (1)H NMR, (13)C NMR, (31)P NMR, SEM, XRD, mass spectra, effective magnetic susceptibility measurements and thermogravimetric analysis (TGA). Computational studies have been carried out at the DFT-B3LYP/6-31G(d) level of theory on the structural and spectroscopic properties of L and its binuclear Er(III) complex. Different tautomers of the ligand were optimized at the ab initio DFT level. Keto-form structure is about 17.7 kcal/mol more stable than the enol form (taking zpe correction into account). Simulated IR frequencies were scaled and compared with that experimentally measured. TD-DFT method was used to compute the UV-VIS spectra which compared by the measured electronic spectra. Copyright © 2013 Elsevier B.V. All rights reserved.

H12CN and H13CN excitation analysis in the circumstellar outflow of R Sculptoris

Science.gov (United States)

Saberi, M.; Maercker, M.; De Beck, E.; Vlemmings, W. H. T.; Olofsson, H.; Danilovich, T.

2017-03-01

Context. The 12CO/13CO isotopologue ratio in the circumstellar envelope (CSE) of asymptotic giant branch (AGB) stars has been extensively used as the tracer of the photospheric 12C/13C ratio. However, spatially-resolved ALMA observations of R Scl, a carbon rich AGB star, have shown that the 12CO/13CO ratio is not consistent over the entire CSE. Hence, it can not necessarily be used as a tracer of the 12C/13C ratio. The most likely hypothesis to explain the observed discrepancy between the 12CO/13CO and 12C/13C ratios is CO isotopologue selective photodissociation by UV radiation. Unlike the CO isotopologue ratio, the HCN isotopologue ratio is not affected by UV radiation. Therefore, HCN isotopologue ratios can be used as the tracer of the atomic C ratio in UV irradiated regions. Aims: We aim to present ALMA observations of H13CN(4-3) and APEX observations of H12CN(2-1), H13CN(2-1, 3-2) towards R Scl. These new data, combined with previously published observations, are used to determine abundances, ratio, and the sizes of line-emitting regions of the aforementioned HCN isotopologues. Methods: We have performed a detailed non-LTE excitation analysis of circumstellar H12CN(J = 1-0, 2-1, 3-2, 4-3) and H13CN(J = 2-1, 3-2, 4-3) line emission around R Scl using a radiative transfer code based on the accelerated lambda iteration (ALI) method. The spatial extent of the molecular distribution for both isotopologues is constrained based on the spatially resolved H13CN(4-3) ALMA observations. Results: We find fractional abundances of H12CN/H2 = (5.0 ± 2.0) × 10-5 and H13CN/H2 = (1.9 ± 0.4) × 10-6 in the inner wind (r ≤ (2.0 ± 0.25) ×1015 cm) of R Scl. The derived circumstellar isotopologue ratio of H12CN/H13CN = 26.3 ± 11.9 is consistent with the photospheric ratio of 12C/13C 19 ± 6. Conclusions: We show that the circumstellar H12CN/H13CN ratio traces the photospheric 12C/13C ratio. Hence, contrary to the 12CO/13CO ratio, the H12CN/H13CN ratio is not affected by UV

Benefit-Risk Assessment, Communication, and Evaluation (BRACE) throughout the life cycle of therapeutic products: overall perspective and role of the pharmacoepidemiologist.

Science.gov (United States)

Radawski, Christine; Morrato, Elaine; Hornbuckle, Kenneth; Bahri, Priya; Smith, Meredith; Juhaeri, Juhaeri; Mol, Peter; Levitan, Bennett; Huang, Han-Yao; Coplan, Paul; Li, Hu

2015-12-01

Optimizing a therapeutic product's benefit-risk profile is an on-going process throughout the product's life cycle. Different, yet related, benefit-risk assessment strategies and frameworks are being developed by various regulatory agencies, industry groups, and stakeholders. This paper summarizes current best practices and discusses the role of the pharmacoepidemiologist in these activities, taking a life-cycle approach to integrated Benefit-Risk Assessment, Communication, and Evaluation (BRACE). A review of the medical and regulatory literature was performed for the following steps involved in therapeutic benefit-risk optimization: benefit-risk evidence generation; data integration and analysis; decision making; regulatory and policy decision making; benefit-risk communication and risk minimization; and evaluation. Feedback from International Society for Pharmacoepidemiology members was solicited on the role of the pharmacoepidemiologist. The case example of natalizumab is provided to illustrate the cyclic nature of the benefit-risk optimization process. No single, globally adopted benefit-risk assessment process exists. The BRACE heuristic offers a way to clarify research needs and to promote best practices in a cyclic and integrated manner and highlight the critical importance of cross-disciplinary input. Its approach focuses on the integration of BRACE activities for risk minimization and optimization of the benefit-risk profile. The activities defined in the BRACE heuristic contribute to the optimization of the benefit-risk profile of therapeutic products in the clinical world at both the patient and population health level. With interdisciplinary collaboration, pharmacoepidemiologists are well suited for bringing in methodology expertise, relevant research, and public health perspectives into the BRACE process. Copyright © 2015 John Wiley & Sons, Ltd.

The crystal structure of TeCl3+AuCl4-

International Nuclear Information System (INIS)

Jones, P.G.; Jentsch, D.; Schwarzmann, E.

1986-01-01

TeCl 3 + AuCl 4 - crystallizes in the triclinic space group Panti 1 with a=7.564(2), b=7.720(3), c=8.964(3) A, α=78.26(3), β=88.84(3), γ=89.35(3) 0 , Z=2. The structure was refined to R 0.041 for 1380 reflections. The cation polyhedron, including secondary Te...Cl interactions, is a square pyramid with mean Te-Cl 2.294, Te...Cl 3.028 A. The secondary interactions link the ions to form centrosymmetric (TeCl 3 .AuCl 4 ) 2 dimers. (orig.)

Evaluating the Ergonomic Benefit of a Wrist Brace on Wrist Posture, Muscle Activity, Rotational Stiffness, and Peak Shovel-Ground Impact Force During a Simulated Tree-Planting Task.

Science.gov (United States)

Sheahan, Peter J; Cashaback, Joshua G A; Fischer, Steven L

2017-09-01

Background Tree planters are at a high risk for wrist injury due to awkward postures and high wrist loads experienced during each planting cycle, specifically at shovel-ground impact. Wrist joint stiffness provides a measure that integrates postural and loading information. Objective The purpose of this study was to evaluate wrist joint stiffness requirements at the instant of shovel-ground impact during tree planting and determine if a wrist brace could alter muscular contributions to wrist joint stiffness. Method Planters simulated tree planting with and without wearing a brace on their planting arm. Surface electromyography (sEMG) from six forearm muscles and wrist kinematics were collected and used to calculate muscular contributions to joint rotational stiffness about the wrist. Results Wrist joint stiffness increased with brace use, an unanticipated and negative consequence of wearing a brace. As a potential benefit, planters achieved a more neutrally oriented wrist angle about the flexion/extension axis, although a less neutral wrist angle about the ulnar/radial axis was observed. Muscle activity did not change between conditions. Conclusion The joint stiffness analysis, combining kinematic and sEMG information in a biologically relevant manner, revealed clear limitations with the interface between the brace grip and shovel handle that jeopardized the prophylactic benefits of the current brace design. This limitation was not as evident when considering kinematics and sEMG data independently. Application A neuromechanical model (joint rotational stiffness) enhanced our ability to evaluate the brace design relative to kinematic and sEMG parameter-based metrics alone.

A [4Fe-4S]-Fe(CO)(CN)-l-cysteine intermediate is the first organometallic precursor in [FeFe] hydrogenase H-cluster bioassembly

Science.gov (United States)

Rao, Guodong; Tao, Lizhi; Suess, Daniel L. M.; Britt, R. David

2018-05-01

Biosynthesis of the [FeFe] hydrogenase active site (the 'H-cluster') requires the interplay of multiple proteins and small molecules. Among them, the radical S-adenosylmethionine enzyme HydG, a tyrosine lyase, has been proposed to generate a complex that contains an Fe(CO)2(CN) moiety that is eventually incorporated into the H-cluster. Here we describe the characterization of an intermediate in the HydG reaction: a [4Fe-4S][(Cys)Fe(CO)(CN)] species, 'Complex A', in which a CO, a CN- and a cysteine (Cys) molecule bind to the unique 'dangler' Fe site of the auxiliary [5Fe-4S] cluster of HydG. The identification of this intermediate—the first organometallic precursor to the H-cluster—validates the previously hypothesized HydG reaction cycle and provides a basis for elucidating the biosynthetic origin of other moieties of the H-cluster.

Cellular Inhibition of Checkpoint Kinase 2 (Chk2) and Potentiation of Camptothecins and Radiation by the Novel Chk2 Inhibitor PV1019 [7-Nitro-1H-indole-2-carboxylic acid {4-[1-(guanidinohydrazone)-ethyl]-phenyl}-amide

Energy Technology Data Exchange (ETDEWEB)

Jobson, Andrew G.; Lountos, George T.; Lorenzi, Philip L.; Llamas, Jenny; Connelly, John; Cerna, David; Tropea, Joseph E.; Onda, Akikazu; Zoppoli, Gabriele; Kondapaka, Sudhir; Zhang, Guangtao; Caplen, Natasha J.; Cardellina, II, John H.; Yoo, Stephen S.; Monks, Anne; Self, Christopher; Waugh, David S.; Shoemaker, Robert H.; Pommier, Yves; (NIH)

2010-04-05

Chk2 is a checkpoint kinase involved in the ataxia telangiectasia mutated pathway, which is activated by genomic instability and DNA damage, leading to either cell death (apoptosis) or cell cycle arrest. Chk2 provides an unexplored therapeutic target against cancer cells. We recently reported 4,4'-diacetyldiphenylurea-bis(guanylhydrazone) (NSC 109555) as a novel chemotype Chk2 inhibitor. We have now synthesized a derivative of NSC 109555, PV1019 (NSC 744039) [7-nitro-1H-indole-2-carboxylic acid {l_brace}4-[1-(guanidinohydrazone)-ethyl]-phenyl{r_brace}-amide], which is a selective submicromolar inhibitor of Chk2 in vitro. The cocrystal structure of PV1019 bound in the ATP binding pocket of Chk2 confirmed enzymatic/biochemical observations that PV1019 acts as a competitive inhibitor of Chk2 with respect to ATP. PV1019 was found to inhibit Chk2 in cells. It inhibits Chk2 autophosphorylation (which represents the cellular kinase activation of Chk2), Cdc25C phosphorylation, and HDMX degradation in response to DNA damage. PV1019 also protects normal mouse thymocytes against ionizing radiation-induced apoptosis, and it shows synergistic antiproliferative activity with topotecan, camptothecin, and radiation in human tumor cell lines. We also show that PV1019 and Chk2 small interfering RNAs can exert antiproliferative activity themselves in the cancer cells with high Chk2 expression in the NCI-60 screen. These data indicate that PV1019 is a potent and selective inhibitor of Chk2 with chemotherapeutic and radiosensitization potential.

HCN4 ion channel function is required for early events that regulate anatomical left-right patterning in a nodal and lefty asymmetric gene expression-independent manner.

Science.gov (United States)

Pai, Vaibhav P; Willocq, Valerie; Pitcairn, Emily J; Lemire, Joan M; Paré, Jean-François; Shi, Nian-Qing; McLaughlin, Kelly A; Levin, Michael

2017-10-15

Laterality is a basic characteristic of all life forms, from single cell organisms to complex plants and animals. For many metazoans, consistent left-right asymmetric patterning is essential for the correct anatomy of internal organs, such as the heart, gut, and brain; disruption of left-right asymmetry patterning leads to an important class of birth defects in human patients. Laterality functions across multiple scales, where early embryonic, subcellular and chiral cytoskeletal events are coupled with asymmetric amplification mechanisms and gene regulatory networks leading to asymmetric physical forces that ultimately result in distinct left and right anatomical organ patterning. Recent studies have suggested the existence of multiple parallel pathways regulating organ asymmetry. Here, we show that an isoform of the hyperpolarization-activated cyclic nucleotide-gated (HCN) family of ion channels (hyperpolarization-activated cyclic nucleotide-gated channel 4, HCN4) is important for correct left-right patterning. HCN4 channels are present very early in Xenopus embryos. Blocking HCN channels ( I h currents) with pharmacological inhibitors leads to errors in organ situs. This effect is only seen when HCN4 channels are blocked early (pre-stage 10) and not by a later block (post-stage 10). Injections of HCN4-DN (dominant-negative) mRNA induce left-right defects only when injected in both blastomeres no later than the 2-cell stage. Analysis of key asymmetric genes' expression showed that the sidedness of Nodal , Lefty , and Pitx2 expression is largely unchanged by HCN4 blockade, despite the randomization of subsequent organ situs, although the area of Pitx2 expression was significantly reduced. Together these data identify a novel, developmental role for HCN4 channels and reveal a new Nodal-Lefty-Pitx2 asymmetric gene expression-independent mechanism upstream of organ positioning during embryonic left-right patterning. © 2017. Published by The Company of Biologists Ltd.

CdTe quantum dots functionalized with 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide as luminescent nanoprobe for the sensitive recognition of bromide ion

Energy Technology Data Exchange (ETDEWEB)

Adegoke, Oluwasesan [Department of Chemistry, Rhodes University, Grahamstown 6140 (South Africa); Hosten, Eric; McCleland, Cedric [Department of Chemistry, Nelson Mandela Metropolitan University (South Campus), Port Elizabeth 6031 (South Africa); Nyokong, Tebello, E-mail: t.nyokong@ru.ac.za [Department of Chemistry, Rhodes University, Grahamstown 6140 (South Africa)

2012-04-06

Graphical abstract: A bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) showed a high selectivity and sensitivity for the determination of bromide ion using fluorescence recovery. Highlights: Black-Right-Pointing-Pointer Water soluble CdTe quantum dots interact with tetramethylpiperidine-N-oxide. Black-Right-Pointing-Pointer Quantum dots fluorescence is quenched by the radical. Black-Right-Pointing-Pointer In the presence of bromide ions the fluorescence is restored. Black-Right-Pointing-Pointer The sensor is more selective to bromine ions than other common ions. - Abstract: A novel bromide ion-selective modified nanoprobe sensor based on 4-amino-2,2,6,6-tetramethylpiperidine-N-oxide (4AT)-functionalized CdTe quantum dots (QDs-4AT) has been developed. Fluorescence quenching of the QDs by 4AT was observed. The functionalized QDs-4AT nanoprobe allowed a highly sensitive determination of bromide ion via analyte-induced change in the photoluminescence (fluorescence recovery) of the modified QDs. A detection limit of 0.6 nM of bromide ion was obtained, while the interfering effect of other inorganic cations and anions was investigated to examine the selectivity of the nanoprobe. The linear range was between 0.01 and 0.13 {mu}M. Combined fluorescence lifetime and electron paramagnetic resonance measurements confirmed electron transfer processes between bromide ion and QDs-4AT.

Di-?-cyanido-tetra?cyanido(5,5,7,12,12,14-hexa?methyl-1,4,8,11-tetra?aza?cyclo?tetra?decane)[N-(quinolin-8-yl)quinoline-2-carboxamidato]diiron(III)nickel(II) 2.07-hydrate

OpenAIRE

Yang, Yuqi; Zhou, Hongbo; Shen, Xiaoping

2013-01-01

The asymmetric unit of the title complex, [Fe2Ni(C19H12N3O)2(CN)6(C16H36N4)]?2.07H2O, contains one [Fe(qcq)(CN)3]? anion, half a [Ni(teta)]2+ cation and two partially occupied inter?stitial water mol?ecules [qcq? is the N-(quinolin-8-yl)quinoline-2-carboxamidate anion and teta is 5,5,7,12,12,14-hexa?methyl-1,4,8,11-tetra?aza?cyclo?tetra?deca?ne]. In the complex mol?ecule, two [Fe(qcq)(CN)3]? anions additionally coordinate the central [Ni(teta)]2+ cation through cyanide groups in a trans mode,...

Bracing system of the reflecting sheets making up an insulating pile

International Nuclear Information System (INIS)

Carr, R.W.

1976-01-01

In order to reduce heat and radiation losses, the body of nuclear reactors and the connected pipe work are encased in reflecting and insulating piles of thin spaced sheets of aluminium or stainless steel. These spaced sheets are then encased in thicker and more solid internal and external shells. The piles and shells are generally shaped to follow the contour of the reactor and connected piping. It is therefore necessary to have available a study bracing system to keep the pile intact during the various handling and assembly operations. The fastening system must also exert an effect on the edge of the pile to prevent the sheets making it up from shifting in relation to each other. The description is given of a fastening system that includes an oblong section to be fitted along the edges of the piles up sheets; bracing substantially perpendicular to the oblong section, to space the sheets of the stack in pairs; and a maintaining system, normally perpendicular to the oblong section, to enable the fastener to be clipped to the edge of the sheets by bending it around the edge of each sheet of the pile [fr

Metabolism of 1,2,3,4-, 1,2,3,5-, and 1,2,4,5-tetrachlorobenzene in the squirrel monkey

International Nuclear Information System (INIS)

Schwartz, H.; Chu, I.; Villeneuve, D.C.; Benoit, F.M.

1987-01-01

The metabolism of three tetrachlorobenzene isomers (TeCB) was investigated in the squirrel monkey. The animals were administered orally 6 single doses of 14 C-labeled 1,2,3,4-, 1,2,4,5-, or 1,2,3,5-tetrachlorobenzene over a 3-wk period at levels ranging from 50 to 100 mg/kg body weight (b.w) and kept in individual metabolism cages to collect urine and feces for radioassay. Approximately 38% (1,2,3,4-TeCB), 36% (1,2,3,5-TeCB), and 18% (1,2,4,5-TeCB) of the doses were excreted respectively in the feces 48 h post administration. In monkeys dosed with 1,2,3,4-TeCB, unchanged compound accounted for 50% of the fecal radioactivity. Unchanged compound accounted for more than 50% of the fecal radioactivity found in the monkeys dosed with 1,2,3,5-TeCB. The fecal metabolites were identified in both groups. No metabolites were detected in the feces of monkeys dosed with 1,2,4,5-TeCB. While the fecal route represented the major route of excretion for 1,2,3,4-TeCB, the other two isomers were eliminated exclusively in the feces. The above data in the squirrel monkey are different from those obtained with the rat and the rabbit, and demonstrate the different metabolic pathways for the isomers

Systematic study of spin crossover and structure in [Co(terpyRX)2](Y)2 systems (terpyRX = 4'-alkoxy-2,2':6',2''-terpyridine, X = 4, 8, 12, Y = BF4(-), ClO4(-), PF6(-), BPh4(-))

DEFF Research Database (Denmark)

Nielsen, Pia; Nielsen, Hans Toftlund; Bond, Andrew

2009-01-01

A family of spin crossover cobalt(II) complexes of the type [Co(terpyRX)(2)](Y)(2) x nH(2)O (X = 4, 8, 12 and Y = BF(4)(-), ClO(4)(-), PF(6)(-), BPh(4)(-)) has been synthesized, whereby the alkyl chain length, RX, and counteranion, Y, have been systematically varied. The structural (single crystal...

50 CFR Figure 15 to Part 223 - Weedless TED Brace Bar Description