WorldWideScience

Sample records for bleaching

  1. Skin Bleaching

    OpenAIRE

    Ahmed, Samira M.

    2015-01-01

    In this project, I aim to investigate the reasoning behind the practice of skin bleaching by analyzing the documentary ”Dark Girls”, to gain a better understanding of race and colorism issues. Also this project tries to see if there is a connection with history and if this has been a part of making the european beauty ideal determine the choices black’s make in regards to beauty.

  2. Bleach vs. Bacteria

    Science.gov (United States)

    ... Articles | Inside Life Science Home Page Bleach vs. Bacteria By Sharon Reynolds Posted April 2, 2014 Your ... hypochlorous acid to help kill invading microbes, including bacteria. Researchers funded by the National Institutes of Health ...

  3. Patterns of coral bleaching: Modeling the adaptive bleaching hypothesis

    Science.gov (United States)

    Ware, J.R.; Fautin, D.G.; Buddemeier, R.W.

    1996-01-01

    Bleaching - the loss of symbiotic dinoflagellates (zooxanthellae) from animals normally possessing them - can be induced by a variety of stresses, of which temperature has received the most attention. Bleaching is generally considered detrimental, but Buddemeier and Fautin have proposed that bleaching is also adaptive, providing an opportunity for recombining hosts with alternative algal types to form symbioses that might be better adapted to altered circumstances. Our mathematical model of this "adaptive bleaching hypothesis" provides insight into how animal-algae symbioses might react under various circumstances. It emulates many aspects of the coral bleaching phenomenon including: corals bleaching in response to a temperature only slightly greater than their average local maximum temperature; background bleaching; bleaching events being followed by bleaching of lesser magnitude in the subsequent one to several years; higher thermal tolerance of corals subject to environmental variability compared with those living under more constant conditions; patchiness in bleaching; and bleaching at temperatures that had not previously resulted in bleaching. ?? 1996 Elsevier Science B.V. All rights reserved.

  4. Bleach Neutralizes Mold Allergens

    Science.gov (United States)

    Science Teacher, 2005

    2005-01-01

    Researchers at National Jewish Medical and Research Center have demonstrated that dilute bleach not only kills common household mold, but may also neutralize the mold allergens that cause most mold-related health complaints. The study, published in the Journal of Allergy and Clinical Immunology, is the first to test the effect on allergic…

  5. BLEACHING NEPTUNE BALLS

    Directory of Open Access Journals (Sweden)

    BONET Maria Angeles

    2014-05-01

    Full Text Available Posidonia Oceanic is a seaweed from Mediterranean Sea and it is more concentrated at the Balerian SEA. This implies the Valencian Community also. It forms vaste underwater meadows in the sea and are part of the Mediterranean ecosystem. It is a sea-grass specie with fruits and flowers. Leaves are ribbon-like and they grow in winter and at the end of summer some of them are separated and arrive to some sea line. Fuit is separated and can floate, it is known as “the olive of the sea” mainly in Italy, or as the Neptune Balls. As it can be used in different fields, it is is being studied in order ro have the precitice tests. Some authors have reported the manufacturing of fully bio-based comites with a gluten matrix by hot-press molding. And it has been considered as an effective insulator for building industry or even though to determine the presence of mercure in the Mediterranean sea some years ago. As many applications can be designed from that fibers, it has been considered to be bleached in order to used them in fashionable products. Consequently, its original brown color is not the most suitable one and it should be bleached as many other cellulosic fibers. The aim of this paper is to bleache neptune balls however, the inner fibers were not accessible at all and it implied not to bleach the inner fibers in the neptune ball. Further studiesd will consider bleaching the individualized fibers.

  6. Bleaching of Wool with Sodium Borohydride

    Directory of Open Access Journals (Sweden)

    Duygu Yilmazer, MSc.

    2009-09-01

    Full Text Available An untreated wool fabric was bleached both with sodium borohydride (SBH in the presence of sodium bisulphite (SBS solution and with a commercial H2O2 bleaching method. The concentration effects of SBH and SBS, bleaching time, pH and temperature on SBH bleaching process were investigated. Whiteness, yellowness and alkali solubility results were assessed for both bleaching methods. The results showed that whiteness degrees obtained with SBH bleaching was comparable with that of H2O2 bleaching method; whereas the alkali solubility values of the SBH bleaching was superior to the H2O2 bleaching.

  7. Bleaching of Black Human Hair

    Institute of Scientific and Technical Information of China (English)

    林琳

    2001-01-01

    Bleaching of black human hair has been studied systematically. On the basis of experimental data the technology of human hair bleaching through five processes was established. The optimum technology of improving the whiteness and reducing damage on fibers has been found. The technology can provide good luster,smooth handle and relatively high strength retention to human hair used for wigs or drama articles, meeting the needs of people better. Moreover, it also has important reference value to bleaching of other colored fibers.

  8. 21 CFR 582.1975 - Bleached beeswax.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Bleached beeswax. 582.1975 Section 582.1975 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1975 Bleached beeswax. (a) Product. Bleached beeswax (white wax). (b) Conditions of...

  9. Bleaching and recovery patterns of corals in Palk Bay, India: An indication of bleaching resilient reef

    Digital Repository Service at National Institute of Oceanography (India)

    Manikandan, B.; Ravindran, J.; Vidya, P.J.; ManiMurali, R.

    Frequency and severity of coral bleaching events increased in recent years affecting the recovery and resilience of corals. In this study, influence of bleaching and recovery patterns of corals on the resilience potential of Palk Bay reef...

  10. Modeling chlorine dioxide bleaching of chemical pulp

    OpenAIRE

    Tarvo, Ville

    2010-01-01

    This doctoral thesis deals with the phenomenon-based modeling of pulp bleaching. Previous bleaching models typically utilize one or two empirical correlations to predict the kinetics in kappa number development. Empirical correlations are simple to develop, but their parameters are often tied to the validation system. A major benefit of physico-chemical phenomenon models is that they are valid regardless of the reaction environment. Furthermore, modeling the bleaching processes at molecular l...

  11. PEROXIDE BLEACHING OF LOW-FREENESS TMP

    Institute of Scientific and Technical Information of China (English)

    ZhongLiu; Y.Ni; Z.Li,G.Court

    2004-01-01

    Peroxide bleaching is an essential unit operation toproduce value-added mechanical pulp-based papergrade. In this paper, we presented the results fromperoxide bleaching of low-freeness TMP for theproduction of SC paper. Two aspects wereaddressed; the effect of pulp strength and theformation of anionic trashes. The strength properties,such as tensile, burst and zero-span tensile, areimproved after the peroxide bleaching process. Theamount of anionic trashes formed is almostproportional to the hydrogen peroxide charge.

  12. Coral bleaching independent of photosynthetic activity.

    Science.gov (United States)

    Tolleter, Dimitri; Seneca, François O; DeNofrio, Jan C; Krediet, Cory J; Palumbi, Stephen R; Pringle, John R; Grossman, Arthur R

    2013-09-23

    The global decline of reef-building corals is due in part to the loss of algal symbionts, or "bleaching," during the increasingly frequent periods of high seawater temperatures. During bleaching, endosymbiotic dinoflagellate algae (Symbiodinium spp.) either are lost from the animal tissue or lose their photosynthetic pigments, resulting in host mortality if the Symbiodinium populations fail to recover. The >1,000 studies of the causes of heat-induced bleaching have focused overwhelmingly on the consequences of damage to algal photosynthetic processes, and the prevailing model for bleaching invokes a light-dependent generation of toxic reactive oxygen species (ROS) by heat-damaged chloroplasts as the primary trigger. However, the precise mechanisms of bleaching remain unknown, and there is evidence for involvement of multiple cellular processes. In this study, we asked the simple question of whether bleaching can be triggered by heat in the dark, in the absence of photosynthetically derived ROS. We used both the sea anemone model system Aiptasia and several species of reef-building corals to demonstrate that symbiont loss can occur rapidly during heat stress in complete darkness. Furthermore, we observed damage to the photosynthetic apparatus under these conditions in both Aiptasia endosymbionts and cultured Symbiodinium. These results do not directly contradict the view that light-stimulated ROS production is important in bleaching, but they do show that there must be another pathway leading to bleaching. Elucidation of this pathway should help to clarify bleaching mechanisms under the more usual conditions of heat stress in the light.

  13. Biochemical methane potential of kraft bleaching effluent and codigestion with other in-mill streams

    DEFF Research Database (Denmark)

    Fitamo, Temesgen Mathewos; Dahl, Olli; Master, Emma;

    2016-01-01

    and in combination: total bleaching effluent, alkaline bleaching effluent, kraft evaporator condensate, and chemithermomechanical pulping effluent. The total bleaching effluent, consisting of the chlorine dioxide bleaching and alkaline bleaching effluents, exhibited the highest potential for organic matter...

  14. In vitro penetration of bleaching agents into the pulp chamber

    DEFF Research Database (Denmark)

    Benetti, Ana Raquel; Valera, M C; Mancini, M N G

    2004-01-01

    To investigate pulp chamber penetration of bleaching agents in teeth following restorative procedures.......To investigate pulp chamber penetration of bleaching agents in teeth following restorative procedures....

  15. Effect of temperature and bleaching agent on bleaching of liquid Cheddar whey.

    Science.gov (United States)

    Listiyani, M A D; Campbell, R E; Miracle, R E; Barbano, D M; Gerard, P D; Drake, M A

    2012-01-01

    The use of whey protein as an ingredient in foods and beverages is increasing, and thus demand for colorless and mild-tasting whey protein is rising. Bleaching is commonly applied to fluid colored cheese whey to decrease color, and different temperatures and bleach concentrations are used. The objectives of this study were to compare the effects of hot and cold bleaching, the point of bleaching (before or after fat separation), and bleaching agent on bleaching efficacy and volatile components of liquid colored and uncolored Cheddar whey. First, Cheddar whey was manufactured, pasteurized, fat-separated, and subjected to one of a number of hot (68°C) or cold (4°C) bleaching applications [hydrogen peroxide (HP) 50 to 500 mg/kg; benzoyl peroxide (BP) 25 to 100 mg/kg] followed by measurement of residual norbixin and color by reflectance. Bleaching agent concentrations were then selected for the second trial. Liquid colored Cheddar whey was manufactured in triplicate and pasteurized. Part of the whey was collected (no separation, NSE) and the rest was subjected to fat separation (FSE). The NSE and FSE wheys were then subdivided and bleaching treatments (BP 50 or 100 mg/kg and HP 250 or 500 mg/kg) at 68°C for 30 min or 4°C for 16 h were applied. Control NSE and FSE with no added bleach were also subjected to each time-temperature combination. Volatile compounds from wheys were evaluated by gas chromatography-mass spectrometry, and norbixin (annatto) was extracted and quantified to compare bleaching efficacy. Proximate analysis, including total solids, protein, and fat contents, was also conducted. Liquid whey subjected to hot bleaching at both concentrations of HP or at 100mg/kg BP had greater lipid oxidation products (aldehydes) compared with unbleached wheys, 50mg/kg BP hot-bleached whey, or cold-bleached wheys. No effect was detected between NSE and FSE liquid Cheddar whey on the relative abundance of volatile lipid oxidation products. Wheys bleached with BP had

  16. Short communication: The influence of solids concentration and bleaching agent on bleaching efficacy and flavor of sweet whey powder.

    Science.gov (United States)

    Jervis, M G; Smith, T J; Drake, M A

    2015-04-01

    Recent studies have demonstrated the effect of bleaching conditions and bleaching agent on flavor and functional properties of whey protein ingredients. Solids concentration at bleaching significantly affected bleaching efficacy and flavor effects of different bleaching agents. It is not known if these parameters influence quality of sweet whey powder (SWP). The purpose of this study was to determine the effects of solids concentration and bleaching agent on the flavor and bleaching efficacy of SWP. Colored cheddar whey was manufactured, fat separated, and pasteurized. Subsequently, the whey (6.7% solids) was bleached, concentrated using reverse osmosis (RO) to 14% solids, and then spray dried, or whey was concentrated before bleaching and then spray dried. Bleaching treatments included a control (no bleaching, 50 °C, 60 min), hydrogen peroxide (HP; 250 mg/kg, 50 °C, 60 min), benzoyl peroxide (50 mg/kg, 50 °C, 60 min), lactoperoxidase (20 mg/kg of HP, 50 °C, 30 min), and external peroxidase (MaxiBright, DSM Food Specialties, Delft, the Netherlands; 2 dairy bleaching units/mL, 50 °C, 30 min). The experiment was repeated in triplicate. Sensory properties and volatile compounds of SWP were evaluated by a trained panel and gas chromatography-mass spectrometry, respectively. Bleaching efficacy (norbixin destruction) and benzoic acid were measured by HPLC. Differences in bleaching efficacy, sensory and volatile compound profiles, and benzoic acid were observed with different bleaching agents, consistent with previous studies. Solids concentration affected bleaching efficacy of HP, but not other bleaching agents. The SWP from whey bleached with HP or lactoperoxidase following RO had increased cardboard and fatty flavors and higher concentrations of lipid oxidation compounds compared with SWP from whey bleached before RO. The SWP bleached with benzoyl peroxide after RO contained less benzoic acid than SWP from whey bleached before RO. These results indicate that

  17. THE STUDY ON TCF BLEACHING OF NS REED PULP

    Institute of Scientific and Technical Information of China (English)

    Meihong Niu; Shulan Shi; Jinghui Zhou; Yunzhan Zhang

    2004-01-01

    In this paper, we have researched TCF bleaching on reed pulp including oxygen delignification, oxygen delignification with H2O2 intensification and H2O2 bleaching. The results show that Op-P bleaching process on NS reed pulp is suitable and the brightness of bleached pulp is up to 82% ISO.

  18. THE STUDY ON TCF BLEACHING OF NS REED PULP

    Institute of Scientific and Technical Information of China (English)

    MeihongNiu; ShulanShi; JinghuiZhou; YunzhanZhang

    2004-01-01

    In this paper, we have researched TCF bleaching on reed pulp including oxygen delignification, oxygen delignification with H202 intensification and H2O2 bleaching. The results show that Op-P bleaching process on NS reed pulp is suitable and the brightness of bleached pulp is up to 82%ISO.

  19. Coral bleaching: the role of the host.

    Science.gov (United States)

    Baird, Andrew H; Bhagooli, Ranjeet; Ralph, Peter J; Takahashi, Shunichi

    2009-01-01

    Coral bleaching caused by global warming is one of the major threats to coral reefs. Very recently, research has focused on the possibility of corals switching symbionts as a means of adjusting to accelerating increases in sea surface temperature. Although symbionts are clearly of fundamental importance, many aspects of coral bleaching cannot be readily explained by differences in symbionts among coral species. Here we outline several potential mechanisms by which the host might influence the bleaching response, and conclude that predicting the fate of corals in response to climate change requires both members of the symbiosis to be considered equally.

  20. The role of microorganisms in coral bleaching.

    Science.gov (United States)

    Rosenberg, Eugene; Kushmaro, Ariel; Kramarsky-Winter, Esti; Banin, Ehud; Yossi, Loya

    2009-02-01

    Coral bleaching is the disruption of the symbiosis between the coral host and its endosymbiotic algae. The prevalence and severity of the disease have been correlated with high seawater temperature. During the last decade, the major hypothesis to explain coral bleaching is that high water temperatures cause irreversible damage to the symbiotic algae resulting in loss of pigment and/or algae from the holobiont. Here, we discuss the evidence for an alternative but not mutually exclusive concept, the microbial hypothesis of coral bleaching.

  1. PEROXIDE BLEACHING OF LOW-FREENESS TMP

    Institute of Scientific and Technical Information of China (English)

    Zhong Liu; Y. Ni; Z. Li; G. Court

    2004-01-01

    Peroxide bleaching is an essential unit operation to produce value-added mechanical pulp-based paper grade. In this paper, we presented the results from peroxide bleaching of low-freeness TMP for the production of SC paper. Two aspects were addressed; the effect of pulp strength and the formation of anionic trashes. The strength properties,such as tensile, burst and zero-span tensile, are improved after the peroxide bleaching process. The amount of anionic trashes formed is almost proportional to the hydrogen peroxide charge.

  2. Mill Designed Bio bleaching Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Institute of Paper Science Technology

    2004-01-30

    A key finding of this research program was that Laccase Mediator Systems (LMS) treatments on high-kappa kraft could be successfully accomplished providing substantial delignification (i.e., > 50%) without detrimental impact on viscosity and significantly improved yield properties. The efficiency of the LMS was evident since most of the lignin from the pulp was removed in less than one hour at 45 degrees C. Of the mediators investigated, violuric acid was the most effective vis-a-vis delignification. A comparative study between oxygen delignification and violuric acid revealed that under relatively mild conditions, a single or a double LMS{sub VA} treatment is comparable to a single or a double O stage. Of great notability was the retention of end viscosity of LMS{sub VA} treated pulps with respect to the end viscosity of oxygen treated pulps. These pulps could then be bleached to full brightness values employing conventional ECF bleaching technologies and the final pulp physical properties were equal and/or better than those bleached in a conventional ECF manner employing an aggressively O or OO stage initially. Spectral analyses of residual lignins isolated after LMS treated high-kappa kraft pulps revealed that similar to HBT, VA and NHA preferentially attack phenolic lignin moieties. In addition, a substantial decrease in aliphatic hydroxyl groups was also noted, suggesting side chain oxidation. In all cases, an increase in carboxylic acid was observed. Of notable importance was the different selectivity of NHA, VA and HBT towards lignin functional groups, despite the common N-OH moiety. C-5 condensed phenolic lignin groups were overall resistant to an LMS{sub NHA, HBT} treatments but to a lesser extent to an LMS{sub VA}. The inactiveness of these condensed lignin moieties was not observed when low-kappa kraft pulps were biobleached, suggesting that the LMS chemistry is influenced by the extent of delignification. We have also demonstrated that the current

  3. Local stressors reduce coral resilience to bleaching.

    Science.gov (United States)

    Carilli, Jessica E; Norris, Richard D; Black, Bryan A; Walsh, Sheila M; McField, Melanie

    2009-07-22

    Coral bleaching, during which corals lose their symbiotic dinoflagellates, typically corresponds with periods of intense heat stress, and appears to be increasing in frequency and geographic extent as the climate warms. A fundamental question in coral reef ecology is whether chronic local stress reduces coral resistance and resilience from episodic stress such as bleaching, or alternatively promotes acclimatization, potentially increasing resistance and resilience. Here we show that following a major bleaching event, Montastraea faveolata coral growth rates at sites with higher local anthropogenic stressors remained suppressed for at least 8 years, while coral growth rates at sites with lower stress recovered in 2-3 years. Instead of promoting acclimatization, our data indicate that background stress reduces coral fitness and resilience to episodic events. We also suggest that reducing chronic stress through local coral reef management efforts may increase coral resilience to global climate change.

  4. On luminescence bleaching of tidal channel sediments

    DEFF Research Database (Denmark)

    Fruergaard, Mikkel; Pejrup, Morten; Murray, Andrew S.

    2015-01-01

    We investigate the processes responsible for bleaching of the quartz OSL signal from tidal channel sediment. Tidal dynamics are expected to play an important role for complete bleaching of tidal sediments. However, no studies have examined the amount of reworking occurring in tidal channels...... and on tidal flats due to the mixing caused by currents and waves. We apply bed level data to evaluate the amount of vertical sediment reworking in modern tidal channels and at a tidal flat. Cycles of deposition and erosion are measured with a bed level sensor, and the results show that gross sedimentation...... on the quantitative measures of sediment reworking, we suggest that repeated depositional and erosional cycles allow for complete bleaching of the tidal flat sediment, and we infer that quartz OSL dating can provide accurate ages for shallow tidal channel fill....

  5. Hemicellulases in the bleaching of chemical pulps.

    Science.gov (United States)

    Suurnäkki, A; Tenkanen, M; Buchert, J; Viikari, L

    1997-01-01

    Hemicellulase-aided bleaching is the first full-scale biotechnical application in the pulp and paper industry which truly exploits the unique specificity and safety of biocatalysts. Hemicellulases are used to modify the structure of xylan and glucomannan in pulp fibers in order to enhance the chemical delignification. This technology can be combined with various types of kraft pulping processes and bleaching sequences. The aims of the enzymatic treatment depend on the actual mill conditions, and may be related to environmental demands, reduction of chemical costs, or maintenance or even improvement of product quality. The technology is applied on the mill scale in several countries. This review describes the principles of the enzyme-aided bleaching, the composition of the fiber substrates, the basic enzymology involved, and the present knowledge of the mechanisms of the action of enzymes, as well as the practical results and advantages obtained on the laboratory and industrial scale.

  6. Bleaching and diffusion dynamics in optofluidic dye lasers

    DEFF Research Database (Denmark)

    Gersborg-Hansen, Morten; Balslev, Søren; Mortensen, Asger

    2007-01-01

    The authors have investigated the bleaching dynamics that occur in optofluidic dye lasers where the liquid laser dye in a microfluidic channel is locally bleached due to optical pumping. They find that for microfluidic devices, the dye bleaching may be compensated through diffusion of dye molecules...... pumping devices. ©2007 American Institute of Physics....

  7. Side effects of external tooth bleaching

    DEFF Research Database (Denmark)

    E.M., Bruzell; Pallesen, Ulla; Thoresen, N.R.

    2013-01-01

    -office = 39.3% [n = 28]; p >0.05; 95% CI [OR]: 0.198‑1.102) whereas prevalence of gingival irritation was higher after in-office treatment (at-home = 14.0%; in-office = 35.7%; p ... attributed to the bleaching treatment in the at-home and in-office groups, respectively. Predictors for side effects were tooth sensitivity, surface loss and gingivitis when observed at inclusion. Treatment-related predictors were bleaching concentration and contact between tray and gingiva. Conclusions...

  8. Stability improvement in bleached phase holograms

    Science.gov (United States)

    Kumar, S.; Singh, K.

    1991-08-01

    An experimental study has been made of the influence of developer composition on the stability against the print-out effect of bleached, photographically recorded two-beam interference grating on Agfa-Gevaert 10E75 NAH plates. The diffraction efficiency has been increased by using potassium iodide and an iodine bleach process that converts a silver image into a dielectric image. An improvement in stability against the print-out effect has been observed by using two new developer compositions. Variation of the maximum diffraction efficiency against exposure to white light is shown graphically.

  9. Identifying well-bleached quartz using the different bleaching rates of quartz and feldspar luminescence signals

    DEFF Research Database (Denmark)

    Murray, A.S.; Thomsen, Kristina Jørkov; Masuda, N.;

    2012-01-01

    When dating older sedimentary deposits using quartz, there are no unambiguous methods for identifying the presence of incomplete bleaching. Current statistical analysis of dose distributions depends entirely on the assumption that incomplete bleaching and mixing are the main causes of any excess...... in relative bleaching rates of quartz optically stimulated luminescence (OSL) and feldspar luminescence stimulated at 50 °C by infrared light (IR50) and feldspar luminescence stimulated at 290 °C by infrared light after a stimulation at 50 °C (pIRIR290), and use recently deposited samples to determine...... that the large aliquot data are more likely to be correct. We conclude that a comparison of quartz and feldspar doses provides a useful independent method for identifying well-bleached quartz samples, and that it is unwise to apply statistical models to dose distributions without clear evidence for the physical...

  10. HYDROGEN PEROXIDE BLEACHING OF CMP PULP USING MAGNESIUM HYDROXIDE

    Directory of Open Access Journals (Sweden)

    Farhad Zeinaly

    2009-11-01

    Full Text Available Conventional bleaching of hardwood CMP pulp with magnesium hydroxide (Mg(OH2 show significant benefits over bleaching with sodium hydroxide (NaOH under various conditions. Magnesium hydroxide bleaching generate higher optical properties, higher pulp yield and lower effluent COD at the same chemical charge, but the physical properties were found to be similar for both processes. The initial freeness of the bleached pulps and refining value to reach a target freeness (about 350 ml. CSF were more for the Mg(OH2-based process. The residual peroxide of filtrate from the Mg(OH2-based process was very high as compared to conventional bleaching.

  11. Bleaching of the discolored traumatized tooth

    DEFF Research Database (Denmark)

    Dahl, Jon E.; Kopperud, Siemen E.; Pallesen, Ulla

    2017-01-01

    This chapter focuses on the treatment of discolored traumatized teeth, most of them being non-vital and subsequently, endodontically treated. Tooth bleaching based upon hydrogen peroxide as the active agent, applied directly or produced in a chemical reaction from sodium perborate or carbamide pe...... retreatment....

  12. REMINERALIZATION POTENTIAL OF A CARBAMIDE BLEACHING AGENT

    Directory of Open Access Journals (Sweden)

    Marinova-Takorova Borislavova Mirela

    2016-03-01

    Full Text Available Background: Bleaching has gradually became a popular procedure for people searching for aesthetic improvement. The aim of this in vitro study was to investigate the effect of bleaching with 45% carbamide peroxide on the level of mineralization of enamel, using laser fluorescence. Materials and methods: Sixty extracted human teeth were treated with 45% carbamid peroxide (Opalescence, Ultradent, 4 consecutive days for one hour each day. The effect of the bleaching agent on the level of mineralization of enamel was measured with DIAGNO dent pen. The statistical method we use was descriptive analysis. Results: The average values, measured before the applications of the carbamid peroxide were 6.33. On the first day they were 5.41, on the second 5.38, on the third 5.11 and 5.35 on the forth. Conclusion: There was observed a slight remineralization effect due to the incorporated Ca2+ and F- ions in the bleaching agent that we have used.

  13. BLEACHING EUCALYPTUS PULPS WITH SHORT SEQUENCES

    Directory of Open Access Journals (Sweden)

    Flaviana Reis Milagres

    2011-03-01

    Full Text Available Eucalyptus spp kraft pulp, due to its high content of hexenuronic acids, is quite easy to bleach. Therefore, investigations have been made attempting to decrease the number of stages in the bleaching process in order to minimize capital costs. This study focused on the evaluation of short ECF (Elemental Chlorine Free and TCF (Totally Chlorine Free sequences for bleaching oxygen delignified Eucalyptus spp kraft pulp to 90% ISO brightness: PMoDP (Molybdenum catalyzed acid peroxide, chlorine dioxide and hydrogen peroxide, PMoD/P (Molybdenum catalyzed acid peroxide, chlorine dioxide and hydrogen peroxide, without washing PMoD(PO (Molybdenum catalyzed acid peroxide, chlorine dioxide and pressurized peroxide, D(EPODP (chlorine dioxide, extraction oxidative with oxygen and peroxide, chlorine dioxide and hydrogen peroxide, PMoQ(PO (Molybdenum catalyzed acid peroxide, DTPA and pressurized peroxide, and XPMoQ(PO (Enzyme, molybdenum catalyzed acid peroxide, DTPA and pressurized peroxide. Uncommon pulp treatments, such as molybdenum catalyzed acid peroxide (PMo and xylanase (X bleaching stages, were used. Among the ECF alternatives, the two-stage PMoD/P sequence proved highly cost-effective without affecting pulp quality in relation to the traditional D(EPODP sequence and produced better quality effluent in relation to the reference. However, a four stage sequence, XPMoQ(PO, was required to achieve full brightness using the TCF technology. This sequence was highly cost-effective although it only produced pulp of acceptable quality.

  14. Global warming and recurrent mass bleaching of corals

    Science.gov (United States)

    Hughes, Terry P.; Kerry, James T.; Álvarez-Noriega, Mariana; Álvarez-Romero, Jorge G.; Anderson, Kristen D.; Baird, Andrew H.; Babcock, Russell C.; Beger, Maria; Bellwood, David R.; Berkelmans, Ray; Bridge, Tom C.; Butler, Ian R.; Byrne, Maria; Cantin, Neal E.; Comeau, Steeve; Connolly, Sean R.; Cumming, Graeme S.; Dalton, Steven J.; Diaz-Pulido, Guillermo; Eakin, C. Mark; Figueira, Will F.; Gilmour, James P.; Harrison, Hugo B.; Heron, Scott F.; Hoey, Andrew S.; Hobbs, Jean-Paul A.; Hoogenboom, Mia O.; Kennedy, Emma V.; Kuo, Chao-Yang; Lough, Janice M.; Lowe, Ryan J.; Liu, Gang; McCulloch, Malcolm T.; Malcolm, Hamish A.; McWilliam, Michael J.; Pandolfi, John M.; Pears, Rachel J.; Pratchett, Morgan S.; Schoepf, Verena; Simpson, Tristan; Skirving, William J.; Sommer, Brigitte; Torda, Gergely; Wachenfeld, David R.; Willis, Bette L.; Wilson, Shaun K.

    2017-03-01

    During 2015–2016, record temperatures triggered a pan-tropical episode of coral bleaching, the third global-scale event since mass bleaching was first documented in the 1980s. Here we examine how and why the severity of recurrent major bleaching events has varied at multiple scales, using aerial and underwater surveys of Australian reefs combined with satellite-derived sea surface temperatures. The distinctive geographic footprints of recurrent bleaching on the Great Barrier Reef in 1998, 2002 and 2016 were determined by the spatial pattern of sea temperatures in each year. Water quality and fishing pressure had minimal effect on the unprecedented bleaching in 2016, suggesting that local protection of reefs affords little or no resistance to extreme heat. Similarly, past exposure to bleaching in 1998 and 2002 did not lessen the severity of bleaching in 2016. Consequently, immediate global action to curb future warming is essential to secure a future for coral reefs.

  15. A novel paleo-bleaching proxy using boron isotopes and high-resolution laser ablation to reconstruct coral bleaching events

    Directory of Open Access Journals (Sweden)

    G. Dishon

    2015-06-01

    Full Text Available Coral reefs occupy only ~0.1% of the oceans habitat, but are the most biologically diverse marine ecosystem. In recent decades, coral reefs have experienced significant global declines due to a variety of causes, one of the major being widespread coral bleaching events. During bleaching the coral expels its symbiotic algae losing its main source of nutrition generally obtained through photosynthesis. While recent coral bleaching events have been extensively investigated, there is no scientific data on historical coral bleaching prior to 1979. In this study, we employ high-resolution femtosecond Laser Ablation Multiple Collector Inductively Coupled Plasma Mass Spectrometry (LA-MC-ICP-MS to demonstrate a distinct biologically-induced decline of boron (B isotopic composition (δ11B as a result of coral bleaching. These findings and methodology offer a new use for a previously developed isotopic proxy to reconstruct paleo-coral bleaching events. Based on a literature review of published δ11B data and our recorded "vital effect" of coral bleaching on the δ11B signal, we also describe at least two possible coral bleaching events since the Last Glacial Maximum. The implementation of this bleaching proxy holds the potential of identifying occurrences of coral bleaching throughout the geological record. A deeper temporal view of coral bleaching will enable scientists to determine if it occurred in the past during times of environmental change and what outcome it may have had on coral population structure.

  16. Changes in bleaching susceptibility among corals subject to ocean warming and recurrent bleaching in Moorea, French Polynesia.

    Directory of Open Access Journals (Sweden)

    Morgan S Pratchett

    Full Text Available BACKGROUND: Climate-induced coral bleaching poses a major threat to coral reef ecosystems, mostly because of the sensitivities of key habitat-forming corals to increasing temperature. However, susceptibility to bleaching varies greatly among coral genera and there are likely to be major changes in the relative abundance of different corals, even if the wholesale loss of corals does not occur for several decades. Here we document variation in bleaching susceptibility among key genera of reef-building corals in Moorea, French Polynesia, and compare bleaching incidence during mass-bleaching events documented in 1991, 1994, 2002 and 2007. METHODOLOGY/PRINCIPAL FINDINGS: This study compared the proportion of colonies that bleached for four major genera of reef-building corals (Acropora, Montipora, Pocillopora and Porites, during each of four well-documented bleaching events from 1991 to 2007. Acropora and Montipora consistently bleached in far greater proportions (up to 98% than Pocillopora and Porites. However, there was an apparent and sustained decline in the proportion of colonies that bleached during successive bleaching events, especially for Acropora and Montipora. In 2007, only 77% of Acropora colonies bleached compared with 98% in 1991. Temporal variation in the proportion of coral colonies bleached may be attributable to differences in environmental conditions among years. Alternately, the sustained declines in bleaching incidence among highly susceptible corals may be indicative of acclimation or adaptation. CONCLUSIONS/SIGNIFICANCE: Coral genera that are highly susceptible to coral bleaching, and especially Acropora and Montipora, exhibit temporal declines in their susceptibility to thermal anomalies at Moorea, French Polynesia. One possible explanation for these findings is that gradual removal of highly susceptible genotypes (through selective mortality of individuals, populations, and/or species is producing a coral assemblage that is

  17. Coral bleaching response index: a new tool to standardize and compare susceptibility to thermal bleaching.

    Science.gov (United States)

    Swain, Timothy D; Vega-Perkins, Jesse B; Oestreich, William K; Triebold, Conrad; DuBois, Emily; Henss, Jillian; Baird, Andrew; Siple, Margaret; Backman, Vadim; Marcelino, Luisa

    2016-07-01

    As coral bleaching events become more frequent and intense, our ability to predict and mitigate future events depends upon our capacity to interpret patterns within previous episodes. Responses to thermal stress vary among coral species; however the diversity of coral assemblages, environmental conditions, assessment protocols, and severity criteria applied in the global effort to document bleaching patterns creates challenges for the development of a systemic metric of taxon-specific response. Here, we describe and validate a novel framework to standardize bleaching response records and estimate their measurement uncertainties. Taxon-specific bleaching and mortality records (2036) of 374 coral taxa (during 1982-2006) at 316 sites were standardized to average percent tissue area affected and a taxon-specific bleaching response index (taxon-BRI) was calculated by averaging taxon-specific response over all sites where a taxon was present. Differential bleaching among corals was widely variable (mean taxon-BRI = 25.06 ± 18.44%, ±SE). Coral response may differ because holobionts are biologically different (intrinsic factors), they were exposed to different environmental conditions (extrinsic factors), or inconsistencies in reporting (measurement uncertainty). We found that both extrinsic and intrinsic factors have comparable influence within a given site and event (60% and 40% of bleaching response variance of all records explained, respectively). However, when responses of individual taxa are averaged across sites to obtain taxon-BRI, differential response was primarily driven by intrinsic differences among taxa (65% of taxon-BRI variance explained), not conditions across sites (6% explained), nor measurement uncertainty (29% explained). Thus, taxon-BRI is a robust metric of intrinsic susceptibility of coral taxa. Taxon-BRI provides a broadly applicable framework for standardization and error estimation for disparate historical records and collection of novel

  18. Incorporating adaptive responses into future projections of coral bleaching.

    Science.gov (United States)

    Logan, Cheryl A; Dunne, John P; Eakin, C Mark; Donner, Simon D

    2014-01-01

    Climate warming threatens to increase mass coral bleaching events, and several studies have projected the demise of tropical coral reefs this century. However, recent evidence indicates corals may be able to respond to thermal stress though adaptive processes (e.g., genetic adaptation, acclimatization, and symbiont shuffling). How these mechanisms might influence warming-induced bleaching remains largely unknown. This study compared how different adaptive processes could affect coral bleaching projections. We used the latest bias-corrected global sea surface temperature (SST) output from the NOAA/GFDL Earth System Model 2 (ESM2M) for the preindustrial period through 2100 to project coral bleaching trajectories. Initial results showed that, in the absence of adaptive processes, application of a preindustrial climatology to the NOAA Coral Reef Watch bleaching prediction method overpredicts the present-day bleaching frequency. This suggests that corals may have already responded adaptively to some warming over the industrial period. We then modified the prediction method so that the bleaching threshold either permanently increased in response to thermal history (e.g., simulating directional genetic selection) or temporarily increased for 2-10 years in response to a bleaching event (e.g., simulating symbiont shuffling). A bleaching threshold that changes relative to the preceding 60 years of thermal history reduced the frequency of mass bleaching events by 20-80% compared with the 'no adaptive response' prediction model by 2100, depending on the emissions scenario. When both types of adaptive responses were applied, up to 14% more reef cells avoided high-frequency bleaching by 2100. However, temporary increases in bleaching thresholds alone only delayed the occurrence of high-frequency bleaching by ca. 10 years in all but the lowest emissions scenario. Future research should test the rate and limit of different adaptive responses for coral species across latitudes and

  19. Randomized controlled trial of sealed in-office bleaching effectiveness.

    Science.gov (United States)

    Santana, Mário Artur Pereira; Nahsan, Flávia Pardo Salata; Oliveira, Alaíde Hermínia de Aguiar; Loguércio, Alessandro Dourado; Faria-e-Silva, André Luis

    2014-01-01

    Regardless of the high success rate, patients commonly report the occurrence of tooth sensitivity during the in-office bleaching procedures. Recently, it has been demonstrated that using a customized tray (called sealed in-office bleaching technique) reduces peroxide penetration. The aim of this randomized clinical study was to evaluate tooth sensitivity and bleaching efficacy of sealed bleaching, in comparison with a conventional in-office technique. Twenty patients were randomized allocated in two groups in which 35% hydrogen peroxide gel was used in a single 45-min application. For the sealed technique, a customized bleaching tray was fabricated and carefully positioned over the bleaching agent during the session. The color was recorded at a baseline, 7 and 28 days after the bleaching session, using Vita Easy Shade spectrophotometer. Tooth sensitivity was recorded during (20 and 40 min) and immediately after the treatment using a visual analogue scale. The bleaching efficacy was evaluated by repeated-measures ANOVA, while the absolute risk of tooth sensitivity and its intensity were evaluated by Fisher's exact and Mann-Whitney tests, respectively (α=0.05). No significant difference on bleaching efficacy was observed between the conventional (7.4 and 8.1 ΔE) and sealed techniques (7.8 and 8.3 ΔE) at both evaluation periods. No significant difference was observed regarding the absolute risk of tooth sensitivity (p=0.15). Sealed technique showed a significant decrease of sensitivity intensity after 40 min (p=0.03). Sealed bleaching technique was able to reduce the sensitivity intensity during the bleaching procedure, without jeopardizing the bleaching efficacy.

  20. A global protocol for monitoring of coral bleaching

    OpenAIRE

    Oliver, J.; Setiasih, N.; Marshall, P.; Hansen, L

    2004-01-01

    Coral bleaching and subsequent mortality represent a major threat to the future health and productivity of coral reefs. However a lack of reliable data on occurrence, severity and other characteristics of bleaching events hampers research on the causes and consequences of this important phenomenon. This article describes a global protocol for monitoring coral bleaching events, which addresses this problem and can be used by people with different levels of expertise and resources.

  1. Photothermal bleaching in time-lapse photoacoustic microscopy

    OpenAIRE

    Gao, Liang; Wang, Lidai; Li, Chiye; Garcia-Uribe, Alejandro; Lihong V. Wang

    2012-01-01

    We studied the phenomenon of photothermal bleaching — a gradual reduction of contrast agent particles during repeated scans in photoacoustic microscopy. The dependence of the photothermal bleaching rate on the excitation pulse energy, pulse duration, and the absorber’s size was determined while the laser focal diameter was held constant. Our results showed that, the dependence of the photothermal bleaching rate on the excitation pulse energy differed before and after the absorbers were raised...

  2. Coral community response to bleaching on a highly disturbed reef

    OpenAIRE

    Guest, J R; Low, J.; Tun, K.; B. Wilson; Ng, C.; Raingeard, D.; K. E. Ulstrup; Tanzil, J. T. I.; Todd, P.A.; Toh, T. C.; McDougald, D; Chou, L.M.; P. D. Steinberg

    2016-01-01

    While many studies of coral bleaching report on broad, regional scale responses, fewer examine variation in susceptibility among coral taxa and changes in community structure, before, during and after bleaching on individual reefs. Here we report in detail on the response to bleaching by a coral community on a highly disturbed reef site south of mainland Singapore before, during and after a major thermal anomaly in 2010. To estimate the capacity for resistance to thermal stress, we report on:...

  3. Coral community response to bleaching on a highly disturbed reef.

    Science.gov (United States)

    Guest, J R; Low, J; Tun, K; Wilson, B; Ng, C; Raingeard, D; Ulstrup, K E; Tanzil, J T I; Todd, P A; Toh, T C; McDougald, D; Chou, L M; Steinberg, P D

    2016-02-15

    While many studies of coral bleaching report on broad, regional scale responses, fewer examine variation in susceptibility among coral taxa and changes in community structure, before, during and after bleaching on individual reefs. Here we report in detail on the response to bleaching by a coral community on a highly disturbed reef site south of mainland Singapore before, during and after a major thermal anomaly in 2010. To estimate the capacity for resistance to thermal stress, we report on: a) overall bleaching severity during and after the event, b) differences in bleaching susceptibility among taxa during the event, and c) changes in coral community structure one year before and after bleaching. Approximately two thirds of colonies bleached, however, post-bleaching recovery was quite rapid and, importantly, coral taxa that are usually highly susceptible were relatively unaffected. Although total coral cover declined, there was no significant change in coral taxonomic community structure before and after bleaching. Several factors may have contributed to the overall high resistance of corals at this site including Symbiodinium affiliation, turbidity and heterotrophy. Our results suggest that, despite experiencing chronic anthropogenic disturbances, turbid shallow reef communities may be remarkably resilient to acute thermal stress.

  4. Mass coral bleaching in 2010 in the southern Caribbean.

    Science.gov (United States)

    Alemu I, Jahson Berhane; Clement, Ysharda

    2014-01-01

    Ocean temperatures are increasing globally and the Caribbean is no exception. An extreme ocean warming event in 2010 placed Tobago's coral reefs under severe stress resulting in widespread coral bleaching and threatening the livelihoods that rely on them. The bleaching response of four reef building taxa was monitored over a six month period across three major reefs systems in Tobago. By identifying taxa resilient to bleaching we propose to assist local coral reef managers in the decision making process to cope with mass bleaching events. The bleaching signal (length of exposure to high ocean temperatures) varied widely between the Atlantic and Caribbean reefs, but regardless of this variation most taxa bleached. Colpophyllia natans, Montastraea faveolata and Siderastrea siderea were considered the most bleaching vulnerable taxa. Interestingly, reefs with the highest coral cover showed the greatest decline reef building taxa, and conversely, reefs with the lowest coral cover showed the most bleaching but lowest change in coral cover with little algal overgrowth post-bleaching.

  5. Mass coral bleaching in 2010 in the southern Caribbean.

    Directory of Open Access Journals (Sweden)

    Jahson Berhane Alemu I

    Full Text Available Ocean temperatures are increasing globally and the Caribbean is no exception. An extreme ocean warming event in 2010 placed Tobago's coral reefs under severe stress resulting in widespread coral bleaching and threatening the livelihoods that rely on them. The bleaching response of four reef building taxa was monitored over a six month period across three major reefs systems in Tobago. By identifying taxa resilient to bleaching we propose to assist local coral reef managers in the decision making process to cope with mass bleaching events. The bleaching signal (length of exposure to high ocean temperatures varied widely between the Atlantic and Caribbean reefs, but regardless of this variation most taxa bleached. Colpophyllia natans, Montastraea faveolata and Siderastrea siderea were considered the most bleaching vulnerable taxa. Interestingly, reefs with the highest coral cover showed the greatest decline reef building taxa, and conversely, reefs with the lowest coral cover showed the most bleaching but lowest change in coral cover with little algal overgrowth post-bleaching.

  6. A novel paleo-bleaching proxy using boron isotopes and high-resolution laser ablation to reconstruct coral bleaching events

    OpenAIRE

    G. Dishon; Fisch, J; Horn, I.; K Kaczmarek; Bijma, J.; Gruber, D.F.; O. Nir; Y. Popovich; D. Tchernov

    2015-01-01

    Coral reefs occupy only ~0.1% of the oceans habitat, but are the most biologically diverse marine ecosystem. In recent decades, coral reefs have experienced significant global declines due to a variety of causes, one of the major being widespread coral bleaching events. During bleaching the coral expels its symbiotic algae losing its main source of nutrition generally obtained through photosynthesis. While recent coral bleaching events hav...

  7. A novel paleo-bleaching proxy using boron isotopes and high-resolution laser ablation to reconstruct coral bleaching events

    Science.gov (United States)

    Dishon, G.; Fisch, J.; Horn, I.; Kaczmarek, K.; Bijma, J.; Gruber, D. F.; Nir, O.; Popovich, Y.; Tchernov, D.

    2015-10-01

    Coral reefs occupy only ~ 0.1 percent of the ocean's habitat, but are the most biologically diverse marine ecosystem. In recent decades, coral reefs have experienced a significant global decline due to a variety of causes, one of the major causes being widespread coral bleaching events. During bleaching, the coral expels its symbiotic algae, thereby losing its main source of nutrition generally obtained through photosynthesis. While recent coral bleaching events have been extensively investigated, there is no scientific data on historical coral bleaching prior to 1979. In this study, we employ high-resolution femtosecond Laser Ablation Multiple Collector Inductively Coupled Plasma Mass Spectrometry (LA-MC-ICP-MS) to demonstrate a distinct biologically induced decline of boron (B) isotopic composition (δ11B) as a result of coral bleaching. These findings and methodology offer a new use for a previously developed isotopic proxy to reconstruct paleo-coral bleaching events. Based on a literature review of published δ11B data and our recorded vital effect of coral bleaching on the δ11B signal, we also describe at least two possible coral bleaching events since the Last Glacial Maximum. The implementation of this bleaching proxy holds the potential of identifying occurrences of coral bleaching throughout the geological record. A deeper temporal view of coral bleaching will enable scientists to determine if it occurred in the past during times of environmental change and what outcome it may have had on coral population structure. Understanding the frequency of bleaching events is also critical for determining the relationship between natural and anthropogenic causes of these events.

  8. A novel paleo-bleaching proxy using boron isotopes and high-resolution laser ablation to reconstruct coral bleaching events

    OpenAIRE

    G. Dishon; Fisch, J; Horn, I.; K Kaczmarek; Bijma, J.; Gruber, D.F.; O. Nir; Y. Popovich; D. Tchernov

    2015-01-01

    Coral reefs occupy only ~ 0.1 percent of the ocean's habitat, but are the most biologically diverse marine ecosystem. In recent decades, coral reefs have experienced a significant global decline due to a variety of causes, one of the major causes being widespread coral bleaching events. During bleaching, the coral expels its symbiotic algae, thereby losing its main source of nutrition generally obtained through photosynthesis. While recent coral bleaching events have been ex...

  9. Evaluation of Extraradicular Diffusion of Hydrogen Peroxide during Intracoronal Bleaching Using Different Bleaching Agents

    Directory of Open Access Journals (Sweden)

    Mohammad E. Rokaya

    2015-01-01

    Full Text Available Objectives. Extra radicular diffusion of hydrogen peroxide associated with intracoronal teeth bleaching was evaluated. Methods. 108 intact single rooted extracted mandibular first premolars teeth were selected. The teeth were instrumented with WaveOne system and obturated with gutta percha and divided into four groups (n=27 according to the bleaching materials used. Each main group was divided into three subgroups (n=9 according to the time of extra radicular hydrogen peroxide diffusion measurements at 1, 7, and 14 days: group 1 (35% hydrogen peroxide, group 2 (35% carbamide peroxide, group 3 (sodium perborate-30% hydrogen peroxide mixture, and group 4 (sodium perborate-water mixture. Four cemental dentinal defects were prepared just below the CEJ on each root surface. The amount of hydrogen peroxide that leached out was evaluated after 1, 7, and 14 days by spectrophotometer analysis. The results were analyzed using the ANOVA and Tukey’s test. Results. Group 1 showed highest extra radicular diffusion, followed by group 3 and group 2, while group 4 showed the lowest mean extra radicular diffusion. Conclusion. Carbamide peroxide and sodium perborate-water mixture are the most suitable bleaching materials used for internal bleaching due to their low extra radicular diffusion of hydrogen peroxide.

  10. Bleach Plant Capital Reduction with Rapid DO Bleaching and Simplified (D/E/D) Stages

    Energy Technology Data Exchange (ETDEWEB)

    T. J. McDonough; C. E. Courchene; J-C. Baromes

    2000-08-01

    The objective of this work was to demonstrate the capabilities of a bleaching sequence that combined a short retention time initial chlorine dioxide stage, referred to as rapid D0, (D0R), with simplified bleaching stages, (D1/E/D2), that required only one final bleach washer. The test sequence DR(EPO)(D/E/D/) was compared to a control sequence, D(EPO)D, for both hardwood and softwood pulps. The capabilities of the DR(EPO)(D/E/D) sequence were successfully demonstrated. An existing three- or four-stage bleach plan can be converted to the more powerful DR(EPO)(D/E/D) sequence without the major capital cost of additional washers. The results from this study showed that the DR(EPO)(D/E/D) sequence can reach 85 brightness on SW with 2.8% total C1O2, while the control sequence, D(EPO)D, required 3.9% C1O2. There was a corresponding decrease in AOX for the test sequence. The strength of pulp bleached in the test sequence was similar to or slightly higher than the control. For the HW pu lp, the test sequence reached 88 brightness with 2.2% C1O2 compared to 3.3% C1O2 for the control. There was a corresponding decrease in AOX generation with the lower chemical requirements. The final viscosity and pulp strength for the test sequence on HW was significantly higher than the corresponding values for the control sequence.

  11. Evaluation of the bleached human enamel by Scanning Electron Microscopy

    DEFF Research Database (Denmark)

    Miranda, Carolina Baptista; Pagani, Clovis; Benetti, Ana Raquel

    2005-01-01

    Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning El...

  12. Investigating Motivations for Women's Skin Bleaching in Tanzania

    Science.gov (United States)

    Lewis, Kelly M.; Robkin, Navit; Gaska, Karie; Njoki, Lillian Carol

    2011-01-01

    Why do many African women continue to use damaging skin-bleaching cosmetics that contain dangerous chemicals (e.g., mercury) that may increase their rates of infertility, skin cancer, and serious skin/brain/kidney disease? To address this question, our study investigated motivations driving the preservation of skin-bleaching practices in Tanzania.…

  13. The Bleaching Syndrome: The Role of Educational Intervention

    Science.gov (United States)

    Hall, Ronald E.

    2016-01-01

    Per the Bleaching Syndrome, people of color, including African, Asian, and Latino Americans, are both victims and perpetrators of color discrimination. The Bleaching Syndrome encompasses perceptual, psychological, and behavioral sectors that affect students' schooling experiences. Education professionals, including teachers, administrators, and…

  14. The effects of habitat on coral bleaching responses in Kenya.

    Science.gov (United States)

    Grimsditch, Gabriel; Mwaura, Jelvas M; Kilonzo, Joseph; Amiyo, Nassir

    2010-06-01

    This study examines the bleaching responses of scleractinian corals at four sites in Kenya (Kanamai, Vipingo, Mombasa and Nyali) representing two distinct lagoon habitats (relatively shallow and relatively deep). Bleaching incidence was monitored for the whole coral community, while zooxanthellae densities and chlorophyll levels were monitored for target species (Pocillopora damicornis, Porites lutea, and Porites cylindrica) during a non-bleaching year (2006) and a year of mild-bleaching (2007). Differences in bleaching responses between habitats were observed, with shallower sites Kanamai and Vipingo exhibiting lower bleaching incidence than deeper sites Nyali and Mombasa. These shallower lagoons display more fluctuating thermal and light environments than the deeper sites, suggesting that corals in the shallower lagoons have acclimatized and/or adapted to the fluctuating environmental conditions they endure on a daily basis and have become more resistant to bleaching stress. In deeper sites that did exhibit higher bleaching (Mombasa and Nyali), it was found that coral recovery occurred more quickly in the protected area than in the non-protected area.

  15. Effect of the Purple Corn Beverage “Chicha Morada” in Composite Resin during Dental Bleaching

    Science.gov (United States)

    Acuña, Eric Dario; Delgado-Cotrina, Leyla; Rumiche, Francisco Aurelio

    2016-01-01

    During dental bleaching the staining potential of the surface would increase. This study aims to evaluate the staining susceptibility of one bleached composite resin after the exposure to three different beverages: Peruvian purple corn based beverage (chicha morada), green tea, and distilled water. Thirty disk-shaped specimens of one nanofill composite resin were prepared. The specimens were then divided into six groups (n = 5): purple corn (P), purple corn + bleaching (PB), green tea (T), green tea + bleaching (TB), distilled water (W), and distilled water + bleaching (WB). In groups that received bleaching, two sessions of bleaching with 35% hydrogen peroxide were done. Following bleaching, specimens were exposed to each liquid thirty minutes daily. Color was measured with a digital spectrophotometer. For statistical analysis, color measurement differences between the obtained results were used: during bleaching, after bleaching, and during + after bleaching. Two-way ANOVA was used to compare the color changes in the resins of all groups (p 3.3). PMID:27034897

  16. The effect of bleaching on toothbrush abrasion of resin composites

    Directory of Open Access Journals (Sweden)

    Hila Hajizadeh

    2013-01-01

    Full Text Available Aim: This experimental study was designed to focus on the effects of bleaching on toothbrush abrasion in three types of composites with different filler size. Materials and Methods: Forty eight disks were prepared from three types of composite and divided into 6 groups. In the first three groups the abrasion test was done. The remaining groups were bleached and the abrasion test was performed. The weight of the samples before and after abrasion was measured. Statistical analysis was done with one-way ANOVA and Duncan test. Results: There was a significant difference in abrasion of composites with different filler size (P < 0.05. The most amount of abrasion was observed in Z100 after being bleached. An increase in abrasion was noticed in all three types of tested composite after bleaching. Conclusion: According to the findings, it is suggested to use a nano filled resin composite for restoration if the bleaching treatment is required.

  17. The use of lactoperoxidase for the bleaching of fluid whey.

    Science.gov (United States)

    Campbell, R E; Kang, E J; Bastian, E; Drake, M A

    2012-06-01

    Lactoperoxidase (LP) is the second most abundant enzyme in bovine milk and has been used in conjunction with hydrogen peroxide (H₂O₂) and thiocyanate (SCN⁻) to work as an antimicrobial in raw milk where pasteurization is not feasible. Thiocyanate is naturally present and the lactoperoxidase system purportedly can be used to bleach dairy products, such as whey, with the addition of very little H₂O₂ to the system. This study had 3 objectives: 1) to quantify the amount of H₂O₂ necessary for bleaching of fluid whey using the LP system, 2) to monitor LP activity from raw milk through manufacture of liquid whey, and 3) to compare the flavor of whey protein concentrate 80% (WPC80) bleached by the LP system to that bleached by traditional H₂O₂ bleaching. Cheddar cheese whey with annatto (15 mL of annatto/454 kg of milk, annatto with 3% wt/vol norbixin content) was manufactured using a standard Cheddar cheesemaking procedure. Various levels of H₂O₂ (5-100 mg/kg) were added to fluid whey to determine the optimum concentration of H₂O₂ for LP activity, which was measured using an established colorimetric method. In subsequent experiments, fat-separated whey was bleached for 1h with 250 mg of H₂O₂/kg (traditional) or 20 mg of H₂O₂/kg (LP system). The WPC80 was manufactured from whey bleached with 250 mg of H₂O₂/kg or 20mg of H₂O₂/kg. All samples were subjected to color analysis (Hunter color values and norbixin extraction) and proximate analysis (fat, protein, and moisture). Sensory and instrumental volatile analyses were conducted on WPC80. Optimal LP bleaching in fluid whey occurred with the addition of 20mg of H₂O₂/kg. Bleaching of fluid whey at either 35 or 50°C for 1 h with LP resulted in > 99% norbixin destruction compared with 32 or 47% destruction from bleaching with 250 mg of H₂O₂/kg, at 35 or 50°C for 1 h, respectively. Higher aroma intensity and increased lipid oxidation compounds were documented in WPC80 from

  18. Evaluation of peanut hulls as an alternative to bleaching clays

    Energy Technology Data Exchange (ETDEWEB)

    Hassanein, M. M.; El-Shami, S. M.; Taha, F. S.

    2011-07-01

    Peanut hulls (PNH) were carbonized at different temperatures, times, and evaluated at different concentrations as an alternative to bleaching clays. Evaluation of bleached crude soybean oil with PNH was based on their delta free fatty acids, reduction in peroxide value (PV), reduction in phospholipids (PL) and bleachability. The performance of several commercially used bleaching clays was evaluated, for comparison. Mixtures were formulated including: PNH and Tonsil -N (TN), PNH and Fuller's earth (FE) and PNH and O-passive (OP) and examined. The oxidative stability of oils was determined. Results for the investigated commercial bleaching clays revealed: TN > FE > F > TF > OP. Highest reduction in PV and PL, and highest bleachability were achieved for soybean oil bleached with 2% PNH carbonized at 500 degree centigrade for 30 min (PNH). Mixtures of PNH with the three chosen bleaching clays indicated that 1PNH : 2TN gave the highest bleachability. CSO was miscella bleached in hexane using PNH and resulted in an appreciable improvement in all oil characteristics, especially in bleachability. Oxidative stability of oils was in the following order: TN > control > FE > PNH with Induction period values of 23.1 > 6.43 > 5.73 > 2.85 h, respectively. (Author) 20 refs.

  19. ECF AND TCF BLEACHING OF SECONDARY FIBER PULP

    Directory of Open Access Journals (Sweden)

    Gustavo Ventorim

    2009-09-01

    Full Text Available In this study, ECF and TCF bleaching processes were evaluated for the bleaching of a deinked mixed office waste (MOW pulp sample produced in a pilot plant. The sample was bleached by all processes to a target brightness of 78 % ISO minimum. The results were interpreted on the basis of chemical cost to reach the target brightness, bleaching yield and bleached pulp quality as measured by viscosity, fluorescence and b* color coordinate. Among the ECF sequences, the mosattractive was the DEDD which showed the lowest chemical cost and produced bleached pulp of high quality as measured by viscosity, fluorescence and b* coordinate. The best TCF sequence with ozone was the Q(PO(ZQ(PO which resulted in very high brightness ceiling. This sequence decreased moderately the pulp b* coordinate and viscosity and slightly its fluorescence. Among the TCF sequences without ozone the Q(POQ(PO was the most effective but showed poor flexibility with regard to brightness ceiling. This sequence had little effect on pulp viscosity, fluorescence and b* coordinate. For all three  bleaching processes, it was determined that process yield is negatively affected by hot alkaline stages such as O, P and (PO.

  20. Is It Necessary to Prepare the Enamel before Dental Bleaching?

    Science.gov (United States)

    Araújo, Erika Michele dos Santos; Garone-Netto, Narciso

    2017-01-01

    The aim of this in vitro study was to assess the influence of distinct surface treatments on the microhardness and color of enamel that will be bleached. Surface treatments are tested, accordingly: G1, no treatment; G2, 2% sodium fluoride; G3, casein phosphopeptide paste; G4, 2% fluoride+Nd:YAG laser. Forty blocks from bovine teeth composed the sample that were tested in Knoop microhardness (n = 10) and in color change (n = 10). After 24 h, bleaching with 35% hydrogen peroxide was performed for 45 min. Microhardness and color changes (using parameters ΔE, ΔL, Δa, and Δb) were assessed before and after bleaching. The data were analyzed by two-way ANOVA and Tukey's test (p microhardness occurred immediately after bleaching in all groups, being greater in G1. Enamel color changed in all groups. Immediately after bleaching, there was a decrease on enamel microhardness. However, after 7 days, some of those specimens previously treated before bleaching significantly recovered their initial microhardness without influencing the esthetic results of bleaching. PMID:28280508

  1. Intrapulpal temperature variation during bleaching with various activation mechanisms

    Directory of Open Access Journals (Sweden)

    Sílvia Masae de Araujo Michida

    2009-10-01

    Full Text Available OBJECTIVES: The aim of this study was to evaluate the intrapulpal temperature variation after bleaching treatment with 35% hydrogen peroxide using different sources of activation. MATERIAL AND METHODS: Twenty-four human teeth were sectioned in the mesiodistal direction providing 48 specimens, and were divided into 4 groups (n=12: (G1 Control - Bleaching gel without light activation, (G2 Bleaching gel + halogen light, (G3 Bleaching gel + LED, (G4 Bleaching gel + Nd:YAG Laser. The temperatures were recorded using a digital thermometer at 4 time points: before bleaching gel application, 1 min after bleaching gel application, during activation of the bleaching gel, and after the bleaching agent turned from a dark-red into a clear gel. Data were analyzed statistically by the Dunnet's test, ANOVA and Tukey's test (a=0.05. RESULTS: The mean intrapulpal temperature values (ºC in the groups were: G1: 0.617 ± 0.41; G2: 1.800 ± 0.68; G3: 0.975 ± 0.51; and G4: 4.325 ± 1.09. The mean maximum temperature variation (MTV values were: 1.5ºC (G1, 2.9ºC (G2, 1.7ºC (G3 and 6.9ºC (G4. When comparing the experimental groups to the control group, G3 was not statistically different from G1 (p>0.05, but G2 and G4 presented significantly higher (p<0.05 intrapulpal temperatures and MTV. The three experimental groups differed significantly (p<0.05 from each other. CONCLUSIONS: The Nd:YAG laser was the activation method that presented the highest values of intrapulpal temperature variation when compared with LED and halogen light. The group activated by LED light presented the lowest values of temperature variation, which were similar to that of the control group.

  2. A bleaching earth from egyptian local deposits

    Directory of Open Access Journals (Sweden)

    El Kinawy, Omayma S.

    2001-10-01

    Full Text Available The present investigation deals with the bleaching of vegetable oils using activated clays collected from some deposits in Egypt as compared to Tonsil FF currently used by local oil industry. The comparison was made; not only on the basis of the decolourising power of the earth, but also on the basis of its effects on the oil acidity, formation of the oil peroxides and the decomposition rate of the formed peroxides to aldehydes and ketones during the bleaching process. The activation of the collected earth samples was made using 4N HCl, 6N HCl and 30 % H2SO4. The bleaching tests of the activated samples were performed using the major four oil types processed in Egypt being cottonseed, sunflower, soybean and palm oils. In addition to the laboratory-evaluation tests, the performance of the activated samples, which showed promise on the lab-scale have been also tested on an industrial scale. The industrial application has proved that the activated local earth's can be successfully used as bleaching earth of local oils. Thus it can be used as a substitute of the varieties currently imported and used by the local oil sector.La presente investigación trata de la decoloración de aceites vegetales usando tierras activadas obtenidas de yacimientos egipcios, comparándola con el Tonsil FF usado normalmente en la industria oleícola local. La comparación se realizó, no sólo sobre la base del poder decolorante de la tierra, sino también sobre la base de sus efectos en la acidez del aceite, la formación de peróxidos y la velocidad de descomposición de los peróxidos formados en aldehidos y cetonas durante el proceso de decoloración. La activación de las muestras de tierras recogidas se hizo utilizando ClH 4N, ClH 6N y H2SO4 30 %. Los tests de decoloración de las muestras activadas se llevaron a cabo usando los cuatro tipos mayoritarios de aceites procesados en Egipto: aceite de semilla de algodón, de girasol, de soja y de palma. Además de los

  3. Salt, chloride, bleach, and innate host defense.

    Science.gov (United States)

    Wang, Guoshun; Nauseef, William M

    2015-08-01

    Salt provides 2 life-essential elements: sodium and chlorine. Chloride, the ionic form of chlorine, derived exclusively from dietary absorption and constituting the most abundant anion in the human body, plays critical roles in many vital physiologic functions, from fluid retention and secretion to osmotic maintenance and pH balance. However, an often overlooked role of chloride is its function in innate host defense against infection. Chloride serves as a substrate for the generation of the potent microbicide chlorine bleach by stimulated neutrophils and also contributes to regulation of ionic homeostasis for optimal antimicrobial activity within phagosomes. An inadequate supply of chloride to phagocytes and their phagosomes, such as in CF disease and other chloride channel disorders, severely compromises host defense against infection. We provide an overview of the roles that chloride plays in normal innate immunity, highlighting specific links between defective chloride channel function and failures in host defense.

  4. Study of Melanin Bleaching After Immunohistochemistry of Melanin-containing Tissues

    OpenAIRE

    2015-01-01

    Melanin may interfere with immunohistochemical staining. The goal of this study was to investigate the effects of trichloroisocyanuric acid (TCCA) bleaching, potassium permanganate bleaching, and potassium dichromate bleaching on melanin, tissue antigen, and 3,3′-diaminobenzidine (DAB) using melanin-containing and melanin-free tissue samples. Our results demonstrated that all 3 bleaching methods efficiently bleached melanin and partially destroyed tissue antigen. In addition, potassium perman...

  5. Reuse of discarded deactivated bleaching earth in the bleaching of oils

    Directory of Open Access Journals (Sweden)

    Girgis, Adel Y.

    2005-03-01

    Full Text Available Discarded bleaching earth was used after its reactivation for the bleaching of sunflower, soybean and corn oils. The efficiency of reactivated bleaching earth was compared to the efficiency of virgin activated bleaching earth. Acid reactivated earth (pH 2.5-3 had a slightly higher content in silicone than virgin activated or neutralized reactivated earths. The best results in the color of sunflower and corn oils were obtained when neutralized earth (pH 6–7 was used at 1 and 2 % levels. Acid reactivated earth used at 2 % achieved a higher reduction in soybean oil color than virgin earth (pH 3 at the same dosage. Both reactivated earths reduced peroxide value, iron, conjugated dienes and soap, while they increased acidity and conjugated trienes. Furthermore, these reactivated earths determined higher decrements in the oil induction period than virgin earth. Reactivated earth could be used for 5 cycles for the bleaching of soybean or corn oils and for more than 6 cycles for sunflower oil.Tierra decolorante desechada, fue empleada, tras su reactivación para decolorar aceites de girasol, soja y maíz. La eficiencia de la tierra decolorante reactivada fue comparada con la de la virgen activada. La tierra reactivada ácida (pH 2,5–3 tuvo ligeramente mayor contenido en silicona que la tierra virgen o la reactivada neutra. Los mejores resultados en el color de los aceites de girasol y maíz fueron obtenidos cuando se emplearon niveles del 1 y 2 % de tierra reactivada neutra (pH 6-7. La tierra ácida reactivada, usada al 2 % consiguió una mayor reducción del color del aceite de soja, que una misma dosis de tierra virgen (pH 3. Ambas tierras reactivadas redujeron el índice de peróxidos, hierro, dienos conjugados y jabón de los aceites, mientras que hicieron aumentar la acidez y los trienos conjugados. Además, estas tierras reactivadas determinaron mayores descensos en los periodos de inducción del aceite que la tierra virgen. Las tierras

  6. Bleaching of the red anthocyanin induced by superoxide radical.

    Science.gov (United States)

    Yamasaki, H; Uefuji, H; Sakihama, Y

    1996-08-01

    Red anthocyanin prepared from petals of Hibiscus rosa-sinensis L. was photobleached in the EDTA-riboflavin system. The rate of bleaching monitored at 565 nm depended on the light intensity and EDTA concentrations. Anaerobic conditions and/or addition of superoxide dismutase prevented the bleaching of anthocyanin, whereas mannitol and catalase did not. A similar bleaching was observed under dark conditions in the xanthine-xanthine oxidase system. The results indicate that anthocyanin is bleached by the nonenzymatic reaction with the superoxide radical and suggest that the pigment can function as an antioxidant. The antioxidative efficiency of cyanidin to superoxide was 10-fold higher than that of cyanidin-3-sophoroside as a Hibiscus anthocyanin.

  7. Through bleaching and tsunami: Coral reef recovery in the Maldives.

    Science.gov (United States)

    Morri, Carla; Montefalcone, Monica; Lasagna, Roberta; Gatti, Giulia; Rovere, Alessio; Parravicini, Valeriano; Baldelli, Giuseppe; Colantoni, Paolo; Bianchi, Carlo Nike

    2015-09-15

    Coral reefs are degrading worldwide, but little information exists on their previous conditions for most regions of the world. Since 1989, we have been studying the Maldives, collecting data before, during and after the bleaching and mass mortality event of 1998. As early as 1999, many newly settled colonies were recorded. Recruits shifted from a dominance of massive and encrusting corals in the early stages of recolonisation towards a dominance of Acropora and Pocillopora by 2009. Coral cover, which dropped to less than 10% after the bleaching, returned to pre-bleaching values of around 50% by 2013. The 2004 tsunami had comparatively little effect. In 2014, the coral community was similar to that existing before the bleaching. According to descriptors and metrics adopted, recovery of Maldivian coral reefs took between 6 and 15years, or may even be considered unachieved, as there are species that had not come back yet.

  8. Ecology: Deep and complex ways to survive bleaching

    Science.gov (United States)

    Pandolfi, John M.

    2015-02-01

    Mass coral bleaching events can drive reefs from being the domains of corals to becoming dominated by seaweed. But longitudinal data show that more than half of the reefs studied rebound to their former glory. See Letter p.94

  9. Evaluation of temperature increase during in-office bleaching

    Science.gov (United States)

    MONDELLI, Rafael Francisco Lia; SOARES, Ana Flávia; PANGRAZIO, Eugenio Gabriel Kegler; WANG, Linda; ISHIKIRIAMA, Sergio Kiyoshi; BOMBONATTI, Juliana Fraga Soares

    2016-01-01

    ABSTRACT The use of light sources in the bleaching process reduces the time required and promotes satisfactory results. However, these light sources can cause an increase in the pulp temperature. Objective The purpose of the present study was to measure the increase in intrapulpal temperature induced by different light-activated bleaching procedures with and without the use of a bleaching gel. Material and Methods A human maxillary central incisor was sectioned 2 mm below the cementoenamel junction. A K-type thermocouple probe was introduced into the pulp chamber. A 35% hydrogen peroxide bleaching gel was applied to the vestibular tooth surface. The light units used were a conventional halogen, a hybrid light (only LED and LED/Laser), a high intensity LED, and a green LED light. Temperature increase values were compared by two-way ANOVA and Tukey´s tests (p<0.05). Results There were statistically significant differences in temperature increases between the different light sources used and between the same light sources with and without the use of a bleaching gel. The presence of a bleaching gel generated an increase in intra-pulpal temperature in groups activated with halogen light, hybrid light, and high intensity LED. Compared to the other light sources, the conventional halogen lamp applied over the bleaching gel induced a significant increase in temperature (3.83±0.41°C). The green LED unit with and without gel application did not produce any significant intrapulpal temperature variations. Conclusion In the present study, the conventional halogen lamp caused the highest increase in intrapulpal temperature, and the green LED caused the least. There was an increase in temperature with all lights tested and the maximum temperature remained below the critical level (5.5°C). The addition of a bleaching gel led to a higher increase in intrapulpal temperatures. PMID:27119761

  10. Evaluation of temperature increase during in-office bleaching

    Directory of Open Access Journals (Sweden)

    Rafael Francisco Lia MONDELLI

    2016-04-01

    Full Text Available ABSTRACT The use of light sources in the bleaching process reduces the time required and promotes satisfactory results. However, these light sources can cause an increase in the pulp temperature. Objective The purpose of the present study was to measure the increase in intrapulpal temperature induced by different light-activated bleaching procedures with and without the use of a bleaching gel. Material and Methods A human maxillary central incisor was sectioned 2 mm below the cementoenamel junction. A K-type thermocouple probe was introduced into the pulp chamber. A 35% hydrogen peroxide bleaching gel was applied to the vestibular tooth surface. The light units used were a conventional halogen, a hybrid light (only LED and LED/Laser, a high intensity LED, and a green LED light. Temperature increase values were compared by two-way ANOVA and Tukey´s tests (p<0.05. Results There were statistically significant differences in temperature increases between the different light sources used and between the same light sources with and without the use of a bleaching gel. The presence of a bleaching gel generated an increase in intra-pulpal temperature in groups activated with halogen light, hybrid light, and high intensity LED. Compared to the other light sources, the conventional halogen lamp applied over the bleaching gel induced a significant increase in temperature (3.83±0.41°C. The green LED unit with and without gel application did not produce any significant intrapulpal temperature variations. Conclusion In the present study, the conventional halogen lamp caused the highest increase in intrapulpal temperature, and the green LED caused the least. There was an increase in temperature with all lights tested and the maximum temperature remained below the critical level (5.5°C. The addition of a bleaching gel led to a higher increase in intrapulpal temperatures.

  11. BLEACHING OF SULFONATED CMP FROM BIO-TREATED WHEAT STRAW

    Institute of Scientific and Technical Information of China (English)

    HongYu; MenghuaQin; XuemeiLu; YinboQu; PeijiGao

    2004-01-01

    Wheat straw chemi-mechanical pulp was pretreated with a crude xylanase which was secreted by white rot fungus Phanerochaete Chrysosporium prior to hydrogen peroxide bleaching. The process of xylanase pretreatment and hydrogen peroxide bleaching was optimized. The xylanase treated pulp achieved a brightness gain of 5.8% ISO over the untreated pulp. The xylanase treatment was found to liberate reducing sugars and facilitating lignin removal. Fiber morphology of pulp treated with xylanase was also studied by SEM.

  12. The effect of combined bleaching techniques on oral microbiota

    Directory of Open Access Journals (Sweden)

    Franz-Montan Michelle

    2009-01-01

    Full Text Available Aims : To evaluate the antimicrobial activity of 10% and 37% carbamide peroxide during dental bleaching in three different modes. Materials and Methods : This five-week double-blind randomized controlled trial included 32 volunteers assigned to four groups (n = 8. Each group received bleaching agents or placebo as an in-office and at-home treatment. The dental bleaching techniques were: In-office bleaching (37% carbamide peroxide: CP37; at-home bleaching (10% carbamide peroxide: CP10 and the association of both (CP37 and CP10. Saliva samples were collected right before (baseline, right after, 12 hours after, and seven days after the treatment. Counts of total microorganisms, Streptococci, and Mutans streptococci were carried out. Friedman test (α = 0.05 was used to compare the microorganism counts. Results : The number of the all oral microorganisms remained stable during all experiment. Conclusions : No bleaching agent (CP37, CP10 or the combination of both was able to reduce the oral microorganisms tested.

  13. Determination of burial dose in incompletely bleached fluvial samples using single grains of quartz

    DEFF Research Database (Denmark)

    Thomsen, Kristina Jørkov; Murray, A.S.; Bøtter-Jensen, Lars

    2007-01-01

    We determine the burial dose in three known-age incompletely bleached fluvial samples using single grains of quartz. Estimation of burial dose in incompletely bleached samples requires that the characteristics of the well-bleached part of the distribution are known in order to distinguish between...... well-bleached and poorly bleached grains. It is especially important to investigate if the uncertainties assigned to individual estimates of dose adequately describe the observed variability in well-bleached dose distributions. We investigate this by quantifying the overdispersion in laboratory...

  14. Bacteria associated with the bleached and cave coral Oculina patagonica.

    Science.gov (United States)

    Koren, Omry; Rosenberg, Eugene

    2008-04-01

    The relative abundance of bacteria in the mucus and tissues of Oculina patagonica taken from bleached and cave (azooxanthellae) corals was determined by analyses of the 16S rRNA genes from cloned libraries of extracted DNA and from isolated colonies. The results were compared to previously published data on healthy O. patagonica. The bacterial community of bleached, cave, and healthy corals were completely different from each other. A tight cluster (>99.5% identity) of bacteria, showing 100% identity to Acinetobacter species, dominated bleached corals, comprising 25% of the 316 clones sequenced. The dominant bacterial cluster found in cave corals, representing 29% of the 97 clones sequenced, showed 98% identity to an uncultured bacterium from the Great Barrier Reef. Vibrio splendidus was the most dominant species in healthy O. patagonica. The culturable bacteria represented 0.1-1.0% of the total bacteria (SYBR Gold staining) of the corals. The most abundant culturable bacteria in bleached, cave, and healthy corals were clusters that most closely matched Microbulbifer sp., an alpha-proteobacterium previously isolated from healthy corals and an alpha-protobacterium (AB026194), respectively. Three generalizations emerge from this study on O. patagonica: (1) More bacteria are associated with coral tissue than mucus; (2) tissue and mucus populations are different; (3) bacterial populations associated with corals change dramatically when corals lack their symbiotic zooxanthellae, either as a result of the bleaching disease or when growing in the absence of light.

  15. AFM analysis of bleaching effects on dental enamel microtopography

    Science.gov (United States)

    Pedreira de Freitas, Ana Carolina; Espejo, Luciana Cardoso; Botta, Sergio Brossi; Teixeira, Fernanda de Sa; Luz, Maria Aparecida A. Cerqueira; Garone-Netto, Narciso; Matos, Adriana Bona; Salvadori, Maria Cecilia Barbosa da Silveira

    2010-02-01

    The purpose of this in vitro study was to test a new methodology to evaluate the effects of 35% hydrogen peroxide agent on the microtopography of sound enamel using an atomic force microscope (AFM). The buccal sound surfaces of three extracted human lower incisors were used, without polishing the surfaces to maintain them with natural morphology. These unpolished surfaces were subjected to bleaching procedure with 35% hydrogen peroxide that consisted of 4 applications of the bleaching agent on enamel surfaces for 10 min each application. Surface images were obtained in a 15 μm × 15 μm area using an AFM. The roughness (Ra and RMS) and the power spectral density (PSD) were obtained before and after the bleaching treatment. As results we could inquire that the PSD analyses were very suitable to identifying the morphological changes on the surfaces, while the Ra and RMS parameters were insufficient to represent the morphological alterations promoted by bleaching procedure on enamel. The morphological wavelength in the range of visible light spectrum (380-750 nm) was analyzed, showing a considerable increase of the PSD with the bleaching treatment.

  16. Ultrastructural evaluation of enamel after dental bleaching associated with fluoride.

    Science.gov (United States)

    Dominguez, John A; Bittencourt, Bruna; Michel, Milton; Sabino, Nilson; Gomes, João Carlos; Gomes, Osnara M M

    2012-08-01

    This study evaluated the effects on human enamel after two bleaching procedures: with a fluoridated bleaching agent and with topical fluoride application postbleaching. It used 43 enamel blocks (3 mm(2) ) that were ground flat (600-2,000 grit) and polished with polishing paste (one and one-fourth). Specimens were randomly divided into three groups according to the bleaching procedure: (1) control group, (2) hydrogen peroxide 35% (HPF) and topical application of fluoride 1.23%, and (3) HP 38% (OP) with fluoride in its composition. Bleaching agents were used according to the manufacturer's instructions. Three methodologies were used: nanoindentation, to observe surface hardness and elastic modulus; atomic force microscopy, to observe surface roughness (R(a) - R(z)); and scanning electron microscopy, to observe the enamel surface effects. Group OP had a decrease in the elastic modulus after bleaching, which was recovered at 14 days. An increased roughness (R(a); 32%) was observed on group HPF and had an increased erosion on enamel surface (67%). It was concluded that topical application of fluoride, after using the nonfluoridated whitening agent, increased the roughness values and erosion of enamel.

  17. Coral Reef Bleaching at Agatti Island of Lakshadweep Atolls, India

    Institute of Scientific and Technical Information of China (English)

    Ramar Vinoth; Mohan Gopi; Thipramalai Thankappanpillai Ajith Kumar; Thirunavukarassu Thangaradjou; Thangavel Balasubramanian

    2012-01-01

    A survey on coral bleaching was carried out at Agatti Island of Lakshadweep from May to June 2010.Elevated sea surface temperatures (SSTs) of the region exceeded the seasonal average and delayed the onset of monsoon,which triggered widespread bleaching of corals.The Agatti reefs showed an average of 73% bleached corals with apparent bleaching-related mortality of sea anemones (87%) and giant clams (83%).The SST increased up to 34 ℃ with an average maximum SST of 32.5℃ during the study period between May and June 2010.Coral reefs on the southern side of the island are fully or partially exposed to sun light during low tide in contrast to the other side.This suggests that the mortality is more likely due to the low tide exposure than exclusively due to the elevated SST.Observations indicated a clear increase in coral bleaching during April 2010,at levels higher than that in normal summer.

  18. AFM analysis of bleaching effects on dental enamel microtopography

    Energy Technology Data Exchange (ETDEWEB)

    Pedreira de Freitas, Ana Carolina, E-mail: anacarolfreitas@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Cardoso Espejo, Luciana, E-mail: luespejo@hotmail.com [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Brossi Botta, Sergio, E-mail: sbbotta@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Sa Teixeira, Fernanda de, E-mail: nandast@if.usp.br [Laboratorio de Filmes Finos, Instituto de Fisica da Universidade de Sao Paulo, Rua do Matao, Travessa R, 187 - Cidade Universitaria, CEP 05314-970, Sao Paulo (Brazil); Cerqueira, Luz Maria Aparecida A., E-mail: maacluz@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Garone-Netto, Narciso, E-mail: ngarone@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Bona Matos, Adriana, E-mail: bona@usp.br [Departamento de Dentistica, Faculdade de Odontologia da Universidade de Sao Paulo, Av. Prof. Lineu Prestes, 2227 - Cidade Universitaria, CEP 05508-000, Sao Paulo (Brazil); Barbosa da Silveira Salvadori, Maria Cecilia, E-mail: mcsalva@if.usp.br [Laboratorio de Filmes Finos, Instituto de Fisica da Universidade de Sao Paulo, Rua do Matao, Travessa R, 187 - Cidade Universitaria, CEP 05314-970, Sao Paulo (Brazil)

    2010-02-15

    The purpose of this in vitro study was to test a new methodology to evaluate the effects of 35% hydrogen peroxide agent on the microtopography of sound enamel using an atomic force microscope (AFM). The buccal sound surfaces of three extracted human lower incisors were used, without polishing the surfaces to maintain them with natural morphology. These unpolished surfaces were subjected to bleaching procedure with 35% hydrogen peroxide that consisted of 4 applications of the bleaching agent on enamel surfaces for 10 min each application. Surface images were obtained in a 15 {mu}m x 15 {mu}m area using an AFM. The roughness (Ra and RMS) and the power spectral density (PSD) were obtained before and after the bleaching treatment. As results we could inquire that the PSD analyses were very suitable to identifying the morphological changes on the surfaces, while the Ra and RMS parameters were insufficient to represent the morphological alterations promoted by bleaching procedure on enamel. The morphological wavelength in the range of visible light spectrum (380-750 nm) was analyzed, showing a considerable increase of the PSD with the bleaching treatment.

  19. Anaphylaxis, contact urticaria, and allergic asthma caused by persulfates in hair bleaching products

    NARCIS (Netherlands)

    Hoekstra, Miriam; Schuttelaar, M.L.; Coenraads, P.J.

    2010-01-01

    Background: Persulfate salts are potent oxidizing agents in hair bleach products that accelerate the bleaching process. Ammonium and potassium persulfates may cause delayedtype and immediate skin reactions. Also allergic asthma and rhinitis have been described. Objectives: Ammonium and potassium per

  20. The effects of coral bleaching on settlement preferences and growth of juvenile butterflyfishes.

    Science.gov (United States)

    Cole, A J; Lawton, R J; Pisapia, C; Pratchett, M S

    2014-07-01

    Coral bleaching and associated mortality is an increasingly prominent threat to coral reef ecosystems. Although the effects of bleaching-induced coral mortality on reef fishes have been well demonstrated, corals can remain bleached for several weeks prior to recovery or death and little is known about how bleaching affects resident fishes during this time period. This study compared growth rates of two species of juvenile butterflyfishes (Chaetodon aureofasciatus and Chaetodon lunulatus) that were restricted to feeding upon either bleached or healthy coral tissue of Acropora spathulata or Pocillopora damicornis. Coral condition (bleached vs. unbleached) had no significant effects on changes in total length or weight over a 23-day period. Likewise, in a habitat choice experiment, juvenile butterflyfishes did not discriminate between healthy and bleached corals, but actively avoided using recently dead colonies. These results indicate that juvenile coral-feeding fishes are relatively robust to short term effects of bleaching events, provided that the corals do recover.

  1. Combined ultrasound-laccase assisted bleaching of cotton.

    Science.gov (United States)

    Basto, Carlos; Tzanov, Tzanko; Cavaco-Paulo, Artur

    2007-03-01

    This study evaluates the potential of using ultrasound to enhance the bleaching efficiency of laccase enzyme on cotton fabrics. Ultrasound of low intensity (7W) and relatively short reaction time (30 min) seems to act in a synergistic way with the enzyme in the oxidation/removal of the natural colouring matter of cotton. The increased bleaching effect could be attributed to improved diffusion of the enzyme from the liquid phase to the fibres surface and throughout the textile structure. On the other hand inactivation of the laccase occurred increasing the intensity of the ultrasound. However, at the ultrasound power applied in the bleaching experiments the loss of enzyme activity was not significant enough to justify the use stabilizer such as polyvinyl alcohol. Furthermore, the polyvinyl alcohol appears to be a substrate for the laccase.

  2. Bleaching of red lake paints in encaustic mummy portraits

    Science.gov (United States)

    Miliani, Costanza; Daveri, Alessia; Spaabaek, Lin; Romani, Aldo; Manuali, Valentina; Sgamellotti, Antonio; Brunetti, Brunetto Giovanni

    2010-09-01

    The present paper reports on the study of the development of whitish opacity in pink paints in encaustic mummy portraits. Non-invasive measurements carried out on two encaustic portraits belonging to the Ny Carlsberg Glyptotek, Copenhagen, by reflectance FTIR and UV-vis fluorescence have shown that the areas prone to the bleaching phenomenon had been painted with melted beeswax and an anthraquinone vegetal lake mixed with calcium sulphate hemihydrate and dihydrate. The hypothesis that the bleaching disease was neither related to a degradation of the dyes nor to an alteration of the wax but rather to a dehydration-hydration reaction of the CaSO4-H2O system, has been corroborated by the analyses of two microsamples from the bleached areas and ascertained by accelerated ageing experiments on encaustic models.

  3. SUGARCANE BAGASSE PULPING AND BLEACHING: THERMAL AND CHEMICAL CHARACTERIZATION

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Fernandes Pereira

    2011-05-01

    Full Text Available Cellulose fibers were isolated from sugarcane bagasse in three stages. Initially sugarcane bagasse was subjected to a pre-treatment process with hydrolyzed acid to eliminate hemicellulose. Whole cellulosic fibers thus obtained were then subjected to a two-stage delignification process and finally to a bleaching process. The chemical structure of the resulting cellulose fibers was studied by Fourier Transform Infrared (FTIR spectroscopy. Scanning Electron Microscopy (SEM and X-ray diffraction (XRD were used to analyze the effects of hydrolysis, delignification, and bleaching on the structure of the fibers. Two different thermal analysis techniques were used to study the bleaching cellulose fibers. These techniques confirmed that cellulose fibers were isolated from sugarcane bagasse. A future goal is to use these fibers as reinforcement elements in composites, organic-inorganic hybrid, and membranes for nanofiltration.

  4. Evaluation and comparison of the microhardness of enamel after bleaching with fluoride free and fluoride containing carbamide peroxide bleaching agents and post bleaching anticay application: An in vitro study

    Directory of Open Access Journals (Sweden)

    Liza George

    2015-01-01

    Full Text Available Aims and Objectives: The purpose of the study was to evaluate and compare the microhardness of enamel after the application of anticay on bleached enamel with fluoride containing and fluoride free bleaching agent. Materials and Methods: Twenty freshly extracted teeth decoronated and divided mesiodistally into two halves were randomly divided into five groups with 10 samples in each group. The enamel surface was treated as follows: Group 1 - no treatment, Group 2 - fluoride free bleaching agent, Group 3 - fluoride containing bleaching agent, and Group 4 - fluoride free bleaching agent followed by anticay application. The samples were subjected to indentation to test the microhardness using Vicker's hardness analyzer. Conclusion: Enamel microhardness significantly increased in samples where anticay was used after the application of bleaching agent.

  5. Tooth-bleaching procedures and their controversial effects: A literature review

    OpenAIRE

    Alqahtani, Mohammed Q.

    2014-01-01

    Aim: This review article will help clinicians improve their understanding of the history of bleaching procedures, bleaching types, components, mechanisms, and their effects on soft tissue, tooth structures, resin composite, and bonding. Methods: The controversial issues about bleaching procedures and their effects are reviewed. Additionally, the consequences of pre- and post-bleaching on the bonding potential of composite resin restorations to tooth structure are discussed. Conclusion: ...

  6. Coral diseases and bleaching on Colombian Caribbean coral reefs.

    Science.gov (United States)

    Navas-Camacho, Raúl; Gil-Agudelo, Diego Luis; Rodríguez-Ramírez, Alberto; Reyes-Nivia, María Catalina; Garzón-Ferreira, Jaime

    2010-05-01

    Since 1998 the National Monitoring System for the Coral Reefs of Colombia (SIMAC) has monitored the occurrence of coral bleaching and diseases in some Colombian coral reefs (permanent stations at San Andres Island, Rosario Islands, Tayrona, San Bernardo Islands and Urabá). The main purpose is to evaluate their health status and to understand the factors that have been contributing to their decline. To estimate these occurrences, annual surveys in 126 permanent belt transects (10 x 2m) with different depth intervals (3-6 meters, 9-12 meters and 15-18 meters) are performed at all reef sites. Data from the 1998-2004 period, revealed that San Andrés Island had many colonies with diseases (38.9 colonies/m2), and Urabá had high numbers with bleaching (54.4 colonies/m2). Of the seven reported coral diseases studied, Dark Spots Disease (DSD), and White Plague Disease (WPD) were noteworthy because they occurred in all Caribbean monitored sites, and because of their high interannual infection incidence. Thirty five species of scleractinian corals were affected by at least one disease and a high incidence of coral diseases on the main reef builders is documented. Bleaching was present in 34 species. During the whole monitoring period, Agaricia agaricites and Siderastrea siderea were the species most severely affected by DSD and bleaching, respectively. Diseases on species such as Agaricia fragilis, A. grahamae, A. humilis, Diploria clivosa, Eusmilia fastigiata, Millepora complanata, and Mycetophyllia aliciae are recorded for first time in Colombia. We present bleaching and disease incidences, kinds of diseases, coral species affected, reef localities studied, depth intervals of surveys, and temporal (years) variation for each geographic area. This variation makes difficult to clearly determine defined patterns or general trends for monitored reefs. This is the first long-term study of coral diseases and bleaching in the Southwestern Caribbean, and one of the few long

  7. 40 CFR 430.20 - Applicability; description of the bleached papergrade kraft and soda subcategory.

    Science.gov (United States)

    2010-07-01

    ... bleached papergrade kraft and soda subcategory. 430.20 Section 430.20 Protection of Environment... POINT SOURCE CATEGORY Bleached Papergrade Kraft and Soda Subcategory § 430.20 Applicability; description of the bleached papergrade kraft and soda subcategory. The provisions of this subpart apply...

  8. Effect of the Purple Corn Beverage "Chicha Morada" in Composite Resin during Dental Bleaching.

    Science.gov (United States)

    Acuña, Eric Dario; Delgado-Cotrina, Leyla; Rumiche, Francisco Aurelio; Tay, Lidia Yileng

    2016-01-01

    During dental bleaching the staining potential of the surface would increase. This study aims to evaluate the staining susceptibility of one bleached composite resin after the exposure to three different beverages: Peruvian purple corn based beverage (chicha morada), green tea, and distilled water. Thirty disk-shaped specimens of one nanofill composite resin were prepared. The specimens were then divided into six groups (n = 5): purple corn (P), purple corn + bleaching (PB), green tea (T), green tea + bleaching (TB), distilled water (W), and distilled water + bleaching (WB). In groups that received bleaching, two sessions of bleaching with 35% hydrogen peroxide were done. Following bleaching, specimens were exposed to each liquid thirty minutes daily. Color was measured with a digital spectrophotometer. For statistical analysis, color measurement differences between the obtained results were used: during bleaching, after bleaching, and during + after bleaching. Two-way ANOVA was used to compare the color changes in the resins of all groups (p composite resin regardless of the bleaching procedure. However, purple corn was the only beverage that caused a perceptible color change (ΔE > 3.3).

  9. Effect of nightguard vital bleaching gel on the color stability of provisional restorative materials

    Directory of Open Access Journals (Sweden)

    Salwa Omar Bajunaid

    2016-01-01

    Conclusions: Composite-based provisional material showed highest color stability when exposed to vital tooth bleaching gel, whereas methacrylate-based material was the least color stable. Polycarbonate crowns were more color stable when exposed to 15% bleaching gel as opposed to 10% bleaching gel.

  10. KINETICS OF DELIGNIFICATION AND CARBOHYDRATE DEGRADATION DURING OXYGEN BLEACHING

    Institute of Scientific and Technical Information of China (English)

    K. L Nguyen

    2004-01-01

    Carbohydrate degradation during oxygen bleaching is associated with cleavage reactions. It is apparent that the loss of the cellulose DP (degree ofpolymisation)is strongly affected by the extent of the delignification. A strong linear correlation can be established between the DP of cellulose chains and the residual lignin in the pulp. The Nuclear Growth concept and Percolation Theory for heterogenous system can be combined to formulate kinetic models for both the delignification and the degradation of carbohydrate. The models prediction is statistically robust and can be applied to different pulps at different bleaching conditions.

  11. Climatological context for large-scale coral bleaching

    Science.gov (United States)

    Barton, A. D.; Casey, K. S.

    2005-12-01

    Large-scale coral bleaching was first observed in 1979 and has occurred throughout virtually all of the tropics since that time. Severe bleaching may result in the loss of live coral and in a decline of the integrity of the impacted coral reef ecosystem. Despite the extensive scientific research and increased public awareness of coral bleaching, uncertainties remain about the past and future of large-scale coral bleaching. In order to reduce these uncertainties and place large-scale coral bleaching in the longer-term climatological context, specific criteria and methods for using historical sea surface temperature (SST) data to examine coral bleaching-related thermal conditions are proposed by analyzing three, 132 year SST reconstructions: ERSST, HadISST1, and GISST2.3b. These methodologies are applied to case studies at Discovery Bay, Jamaica (77.27°W, 18.45°N), Sombrero Reef, Florida, USA (81.11°W, 24.63°N), Academy Bay, Galápagos, Ecuador (90.31°W, 0.74°S), Pearl and Hermes Reef, Northwest Hawaiian Islands, USA (175.83°W, 27.83°N), Midway Island, Northwest Hawaiian Islands, USA (177.37°W, 28.25°N), Davies Reef, Australia (147.68°E, 18.83°S), and North Male Atoll, Maldives (73.35°E, 4.70°N). The results of this study show that (1) The historical SST data provide a useful long-term record of thermal conditions in reef ecosystems, giving important insight into the thermal history of coral reefs and (2) While coral bleaching and anomalously warm SSTs have occurred over much of the world in recent decades, case studies in the Caribbean, Northwest Hawaiian Islands, and parts of other regions such as the Great Barrier Reef exhibited SST conditions and cumulative thermal stress prior to 1979 that were comparable to those conditions observed during the strong, frequent coral bleaching events since 1979. This climatological context and knowledge of past environmental conditions in reef ecosystems may foster a better understanding of how coral reefs will

  12. Sunflower oil bleaching by adsorption onto acid-activated bentonite

    Directory of Open Access Journals (Sweden)

    E. L. Foletto

    2011-03-01

    Full Text Available Two bentonite clays with different mineralogical compositions from Mendoza, Argentine, were activated with H2SO4 solutions of 4 and 8 N at 90ºC for 3.5 hours. This treatment affected clay structural properties, as was shown by thermogravimetry, infrared spectrometry and chemical analysis. Bleaching efficiency for sunflower oil was strongly dependent on the acid concentration used for clay activation. The samples have bleaching capacity comparable to that observed with a commercial adsorbent standard. The mineralogical composition of natural clays influenced the properties of the activated clays.

  13. Effectiveness of bleaching agent on composite resin discoloration

    Directory of Open Access Journals (Sweden)

    Galih Sampoerno

    2012-03-01

    Full Text Available Background: The discoloration of teeth, especially anterior teeth, is one of aesthetic problems. The use of tooth bleaching agents for discolored natural teeth is becoming increasingly popular. Many dentists, however, get many problems when they conduct bleaching process since there is much composite filling on patient’s anterior teeth. Although many research have focused on the discoloration of composite resin after bleaching process, the problem still becomes debatable. Purpose: The purpose of this study was to investigate the difference of the discoloration between hybrid composite and nano composite before and after the application of tooth bleaching agent, 38% hydrogen peroxide. Methods: Eighteen disk-shaped specimens (5 mm of each of two composite resins, hybrid and nano filler, were prepared. The each group was treated 3 times and the specimens were divided into two groups consisted of 9 specimens for each, and then immersed in black tea solutions for 72 hours. Next, after having staining and bleaching processes, the color of the specimens was measured with a optic spectrophotometer by using photo with type BPY-47 and digital microvolt. The differences of the light intensity among three measurements were then calculated. Afterwards, GLM MANOVA Repeated Measure and parametric analysis (Independent t-test and Paired t-test were then used to analyze the data. Results: After staining process, it is then known that the nano composite had more discoloration and more affected by the black tea solution than the hybrid one. Conclusion: After bleaching, the discoloration was finally removed completely from both hybride and nano filler composite resins and became brighter from the baseline color.Latar belakang: Salah satu problem estetik adalah adanya perubahan warna pada gigi anterior. Peningkatan pemakaian bahan bleaching semakin popular. Banyak dokter gigi mempunyai problem ketika mereka akan melakukan proses bleaching dan ditemukan banyak

  14. Three-month evaluation of vital tooth bleaching using light units-a randomized clinical study.

    Science.gov (United States)

    Polydorou, O; Wirsching, M; Wokewitz, M; Hahn, P

    2013-01-01

    The aim of this study was to evaluate the color stability of vital bleaching using a halogen unit, laser, or only chemical activation up to three months after treatment. A total of 60 patients were divided into three groups, and their teeth were bleached with 38% hydrogen peroxide using three methods: acceleration of the bleaching process with halogen (eight minutes), laser (30 seconds), or chemical activation only. All teeth were bleached a maximum of four times (4 × 15 minutes) until a change of six shade tabs took place. The color was evaluated both visually and with a spectrophotometer before bleaching, immediately after bleaching, and one and three months after bleaching. Directly after bleaching, the use of halogen showed better results than laser (p≤0.05). One and three months after bleaching, no significant difference was found between the tested methods relative to the shade change, independent of the method of shade evaluation (p>0.05). As far as the color stability is concerned, bleaching with halogen resulted in stable color throughout the three months (p>0.05), whereas the other two methods resulted in whiter teeth after one and three months compared with the color directly after bleaching (p≤0.05). Bleaching with laser needed more time than halogen for the desired shade change (p≤0.05). Although directly after treatment bleaching with halogen resulted in better results, one and three months after bleaching the kind of acceleration used in the bleaching process did not have any effect on the esthetic results.

  15. Taxonomic, Spatial and Temporal Patterns of Bleaching in Anemones Inhabited by Anemonefishes

    KAUST Repository

    Hobbs, Jean-Paul A.

    2013-08-08

    Background:Rising sea temperatures are causing significant destruction to coral reef ecosystems due to coral mortality from thermally-induced bleaching (loss of symbiotic algae and/or their photosynthetic pigments). Although bleaching has been intensively studied in corals, little is known about the causes and consequences of bleaching in other tropical symbiotic organisms.Methodology/Principal Findings:This study used underwater visual surveys to investigate bleaching in the 10 species of anemones that host anemonefishes. Bleaching was confirmed in seven anemone species (with anecdotal reports of bleaching in the other three species) at 10 of 19 survey locations spanning the Indo-Pacific and Red Sea, indicating that anemone bleaching is taxonomically and geographically widespread. In total, bleaching was observed in 490 of the 13,896 surveyed anemones (3.5%); however, this percentage was much higher (19-100%) during five major bleaching events that were associated with periods of elevated water temperatures and coral bleaching. There was considerable spatial variation in anemone bleaching during most of these events, suggesting that certain sites and deeper waters might act as refuges. Susceptibility to bleaching varied between species, and in some species, bleaching caused reductions in size and abundance.Conclusions/Significance:Anemones are long-lived with low natural mortality, which makes them particularly vulnerable to predicted increases in severity and frequency of bleaching events. Population viability will be severely compromised if anemones and their symbionts cannot acclimate or adapt to rising sea temperatures. Anemone bleaching also has negative effects to other species, particularly those that have an obligate relationship with anemones. These effects include reductions in abundance and reproductive output of anemonefishes. Therefore, the future of these iconic and commercially valuable coral reef fishes is inextricably linked to the ability of host

  16. Taxonomic, spatial and temporal patterns of bleaching in anemones inhabited by anemonefishes.

    Directory of Open Access Journals (Sweden)

    Jean-Paul A Hobbs

    Full Text Available BACKGROUND: Rising sea temperatures are causing significant destruction to coral reef ecosystems due to coral mortality from thermally-induced bleaching (loss of symbiotic algae and/or their photosynthetic pigments. Although bleaching has been intensively studied in corals, little is known about the causes and consequences of bleaching in other tropical symbiotic organisms. METHODOLOGY/PRINCIPAL FINDINGS: This study used underwater visual surveys to investigate bleaching in the 10 species of anemones that host anemonefishes. Bleaching was confirmed in seven anemone species (with anecdotal reports of bleaching in the other three species at 10 of 19 survey locations spanning the Indo-Pacific and Red Sea, indicating that anemone bleaching is taxonomically and geographically widespread. In total, bleaching was observed in 490 of the 13,896 surveyed anemones (3.5%; however, this percentage was much higher (19-100% during five major bleaching events that were associated with periods of elevated water temperatures and coral bleaching. There was considerable spatial variation in anemone bleaching during most of these events, suggesting that certain sites and deeper waters might act as refuges. Susceptibility to bleaching varied between species, and in some species, bleaching caused reductions in size and abundance. CONCLUSIONS/SIGNIFICANCE: Anemones are long-lived with low natural mortality, which makes them particularly vulnerable to predicted increases in severity and frequency of bleaching events. Population viability will be severely compromised if anemones and their symbionts cannot acclimate or adapt to rising sea temperatures. Anemone bleaching also has negative effects to other species, particularly those that have an obligate relationship with anemones. These effects include reductions in abundance and reproductive output of anemonefishes. Therefore, the future of these iconic and commercially valuable coral reef fishes is inextricably linked

  17. Chlorophyll bleaching by UV-irradiation in vitro and in situ: Absorption and fluorescence studies

    Energy Technology Data Exchange (ETDEWEB)

    Zvezdanovic, Jelena [Faculty of Technology, University of Nish, Bulevar oslobodjenja 124, 16000 Leskovac (Serbia)], E-mail: jelite74@yahoo.com; Cvetic, Tijana [Faculty of Biology, University of Belgrade, Takovska 43, Belgrade 11000 (Serbia); Veljovic-Jovanovic, Sonja [Center for Multidisciplinary Studies, University of Belgrade, Kneza Viseslava la, Belgrade 11030 (Serbia); Markovic, Dejan [Faculty of Technology, University of Nish, Bulevar oslobodjenja 124, 16000 Leskovac (Serbia)], E-mail: dejan_markovic57@yahoo.com

    2009-01-15

    Chlorophyll bleaching by UV-irradiation has been studied by absorbance and fluorescence spectroscopy in extracts containing mixtures of photosynthetic pigments, in acetone and n-hexane solutions, and in aqueous thylakoid suspensions. Chlorophyll undergoes destruction (bleaching) accompanied by fluorescent transient formation obeying first-order kinetics. The bleaching is governed by UV-photon energy input, as well as by different chlorophyll molecular organizations in solvents of different polarities (in vitro), and in thylakoids (in situ). UV-C-induced bleaching of chlorophylls in thylakoids is probably caused by different mechanisms compared to UV-A- and UV-B-induced bleaching.

  18. Chlorine bleaches - A significant long term source of mercury pollution

    Science.gov (United States)

    Siegel, S. M.; Eshleman, A.

    1975-01-01

    Products of industrial electrolysis of brine - NaOCl-based bleaches and NaOH - yielded 17 to 1290 ppb of Hg upon flameless atomic absorption analysis. Compared with current U.S. rejection value of 5 ppb for potable waters, the above levels seem sufficiently high to be a matter of environmental concern.

  19. Bleaching in vital deciduous teeth – a clinical case

    Directory of Open Access Journals (Sweden)

    José Carlos Pettorossi Imparato

    2008-01-01

    Full Text Available There has been growing concern and search for esthetic beauty and harmony over the last few years. This concern does not form part ofadults’ lives only, but also of children’s. Among the substances used for bleaching dental structures, the most outstanding are those whoseactive principle is hydrogen peroxide-based . The present study reports a clinical case of a 4-year-old girl that suffered trauma of tooth 61 with consequent color alteration, but with no alteration in pulp vitality. The main complaint by the patient and her guardians concerned esthetics, therefore external dental bleaching was performed, using Opalescence Xtra® (Ultradent, in two sessions with an interval of one month between them. External in office bleaching was the treatment of choice, due to the tooth vitality, patient’s age and presence of only one darkened tooth. After the bleaching treatments an improvement in the darkening was observed, and both the child and her guardians were satisfied with the esthetic result.

  20. Quantification of cross-bleaching during infrared (IR) light stimulation

    DEFF Research Database (Denmark)

    Kreutzer, Sebastian; Hülle, Daniela; Thomsen, Kristina Jørkov;

    2013-01-01

    The cross-bleaching behaviour of automated Risø TL/OSL (DA-12, DA-15, DA-20) luminescence readers is investigated. By design, up to 24 or 48 aliquots can be stored on a carousel in a single measurement chamber. Due to this construction, irradiation or illumination on one sample may affect...... measurements of feldspar or polymineral samples it is important to keep the time constant between the (midpoint of the) irradiation and the subsequent read out to avoid the malign effects of anomalous fading in laboratory constructed dose response curves. This may be achieved by running all measurements...... on subsequent samples. Here we investigate the size of this reduction due to cross-bleaching from the IR diodes and quantify the cross-bleaching for 10 different Risø TL/OSL readers produced between 1994 and 2011. We find that cross-bleaching from the IR diodes is worse than from the blue diodes. Using the “run...

  1. OZONE BLEACHING AT NEUTRAL PH – A NEW CONCEPT

    Directory of Open Access Journals (Sweden)

    Fernando de Carvalho

    2010-08-01

    Full Text Available The effect of medium consistency ozone stage pH was evaluated for brown and oxygen delignified eucalyptus kraft pulp samples obtained from VCP - Luiz Antônio pulp mill. These samples were used as such or previously treated with the hot acid stage (A. The main objective of this study was to determine the viability of increasing the ozone stage pH aiming at decreasing bleaching variable costs. The ozone stage was studied in the pH range of 2.5-9.0, taking into account some important variables which affect ozone bleaching: (1 pulp kappa number entering the ozone stage, (2 reactivity of ozone towards lignin versus hexenuronic acids (HexA´s, (3 pulp treatments prior to ozone stage (acid hydrolysis, and (4 pulp treatments after the ozone stage (extraction or a chlorine dioxide stage.  Therefore, the impact of ozone stage pH was investigated in bleaching process such as Z/DEop vs AZ/DEop, Z/DEopD vs AZ/DEopD, Z/E vs AZ/E. The results were interpreted based on ozone stage efficiency and selectivity, and overall bleaching performance measured by the total bleaching chemical consumption required to achieve full brightness, pulp quality and environmental impact. It was concluded that the increase of ozone stage pH from 2.5 to 7.0 has a slightly negative impact on the efficiency and selectivity, measured after Z/DEop sequence, but this effect is not expressive in the end of Z/DEopD bleaching sequence. The increase of ozone stage pH from 2.5 to 7.0 in the sequence Z/DEopD is cost-effective at industrial level because it represents expressive reduction of sulphuric acid and caustic soda demand for pH control in the bleaching plant. These gain areas achieved without any significant changes in pulp quality and effluent load discharge. Nevertheless, the increase of ozone stage pH from 2.5 to 7.0 has a very high negative impact on the efficiency and selectivity for the Z/E and AZ/E processes and it is not recommended in such cases.

  2. Can a bleaching toothpaste containing Blue Covarine demonstrate the same bleaching as conventional techniques? An in vitro, randomized and blinded study

    Directory of Open Access Journals (Sweden)

    Andréa Abi Rached DANTAS

    2015-12-01

    Full Text Available ABSTRACT Objective The purpose of this in vitro study was to compare the efficacy of a bleaching toothpaste containing Blue Covarine vs. conventional tooth bleaching techniques using peroxides (both in-office and at-home. Material and Methods Samples were randomly distributed into five experimental groups (n=15: C - Control; BC – Bleaching toothpaste containing Blue Covarine; WBC – Bleaching toothpaste without Blue Covarine; HP35 - In-office bleaching using 35% hydrogen peroxide; and CP10 – At-home bleaching with 10% carbamide peroxide. The dental bleaching efficacy was determined by the color difference (ΔE, luminosity (ΔL, green-red axis (Δa, and blue-yellow axis (Δb. The CIELab coordinates were recorded with reflectance spectroscopy at different times: T0 - baseline, T1 – immediately after bleaching, T2 - 7 days, T3 - 14 days, and T4 - 21 days after the end of treatments. Data were analyzed by a repeated measures mixed ANOVA and post hoc Bonferroni test, with a significance level of 5%. Results No significant differences were found between the treatment groups C, BC, and WBC. The groups HP35 and CP10 showed significantly higher whitening efficacy than groups C, BC, and WBC. Conclusions There were no significant differences in the whitening efficacy between a Blue Covarine containing toothpaste, a standard whitening toothpaste, and a control. Neither of the whitening toothpastes tested were as effective as in-office or at-home bleaching treatments.

  3. In-office bleaching effects on the pulp flow and tooth sensitivity - case series.

    Science.gov (United States)

    Cartagena, Andrés Felipe; Parreiras, Sibelli Olivieri; Loguercio, Alessandro Dourado; Reis, Alessandra; Campanha, Nara Hellen

    2015-01-01

    Laser Doppler flowmetry (LDF) is a noninvasive method capable of evaluating variations in pulp blood flow (PBF) and pulp vitality. This method has thus far not been used to assess changes in blood flow after in-office bleaching. The aim of this case series report was to measure changes in PBF by LDF in the upper central incisor of three patients submitted to in-office bleaching. The buccal surfaces of the upper arch were bleached with a single session of 35% hydrogen peroxide gel with three 15-min applications. The color was recorded using a value-oriented Vita shade guide before in-office bleaching and one week after the procedure. The tooth sensitivity (TS) in a verbal scale was reported, and PBF was assessed by LDF before, immediately, and one week after the bleaching session. The lower arch was submitted to dental bleaching but not used for data assessment. A whitening degree of 3 to 4 shade guide units was detected. All participants experienced moderate to considerable TS after the procedure. The PBF readings reduced 20% to 40% immediately after bleaching. One week post-bleaching, TS and PBF were shown to be equal to baseline values. A reversible decrease of PBF was detected immediately after bleaching, which recovered to the baseline values or showed a slight increase sooner than one week post-bleaching. The LDF method allows detection of pulp blood changes in teeth submitted to in-office bleaching, but further studies are still required.

  4. Clinical trial evaluating color change and tooth sensitivity throughout and following in-office bleaching.

    Science.gov (United States)

    Machado, Lucas Silveira; de Oliveira, Fernanda Garcia; Rocha, Eduardo Passos; dos Santos, Paulo Henrique; Briso, André Luiz Fraga; Sundefeld, Maria Lúcia Marçal Mazza; Sundfeld, Renato Herman

    2013-01-01

    The aim of this study was to assess the color alteration and sensitivity of teeth throughout and following in-office bleaching. Twenty-two volunteers participated in this clinical trial of bleaching treatment (35% hydrogen peroxide bleaching gel and placebo) applied on maxillary incisors and canines. According to a split-mouth design, the volunteers' maxillary hemi-arches received either the bleaching or placebo agent, applied four times, at 1-week intervals. Color alteration and tooth sensitivity were assessed throughout and following bleaching. Statistical calculations were performed using gamma distribution and repeated-measures ANOVA. There was a statistically significant difference between teeth submitted to a bleaching agent and placebo (P < .001). At the end of the first, second, third, and fourth sessions, the bleached teeth presented color scores statistically lower than those observed immediately before bleaching. There was no difference in the color scale scores of the bleached teeth between bleaching sessions. The sensitivity data test showed a significant difference among treatments (P < .0001). Color alteration and dental sensitivity were altered by the bleaching agent.

  5. Effect of the Purple Corn Beverage “Chicha Morada” in Composite Resin during Dental Bleaching

    Directory of Open Access Journals (Sweden)

    Eric Dario Acuña

    2016-01-01

    Full Text Available During dental bleaching the staining potential of the surface would increase. This study aims to evaluate the staining susceptibility of one bleached composite resin after the exposure to three different beverages: Peruvian purple corn based beverage (chicha morada, green tea, and distilled water. Thirty disk-shaped specimens of one nanofill composite resin were prepared. The specimens were then divided into six groups (n=5: purple corn (P, purple corn + bleaching (PB, green tea (T, green tea + bleaching (TB, distilled water (W, and distilled water + bleaching (WB. In groups that received bleaching, two sessions of bleaching with 35% hydrogen peroxide were done. Following bleaching, specimens were exposed to each liquid thirty minutes daily. Color was measured with a digital spectrophotometer. For statistical analysis, color measurement differences between the obtained results were used: during bleaching, after bleaching, and during + after bleaching. Two-way ANOVA was used to compare the color changes in the resins of all groups (p3.3.

  6. In-office bleaching effects on the pulp flow and tooth sensitivity – case series

    Directory of Open Access Journals (Sweden)

    Andrés Felipe CARTAGENA

    2015-01-01

    Full Text Available Laser Doppler flowmetry (LDF is a noninvasive method capable of evaluating variations in pulp blood flow (PBF and pulp vitality. This method has thus far not been used to assess changes in blood flow after in-office bleaching. The aim of this case series report was to measure changes in PBF by LDF in the upper central incisor of three patients submitted to in-office bleaching. The buccal surfaces of the upper arch were bleached with a single session of 35% hydrogen peroxide gel with three 15-min applications. The color was recorded using a value-oriented Vita shade guide before in-office bleaching and one week after the procedure. The tooth sensitivity (TS in a verbal scale was reported, and PBF was assessed by LDF before, immediately, and one week after the bleaching session. The lower arch was submitted to dental bleaching but not used for data assessment. A whitening degree of 3 to 4 shade guide units was detected. All participants experienced moderate to considerable TS after the procedure. The PBF readings reduced 20% to 40% immediately after bleaching. One week post-bleaching, TS and PBF were shown to be equal to baseline values. A reversible decrease of PBF was detected immediately after bleaching, which recovered to the baseline values or showed a slight increase sooner than one week post-bleaching. The LDF method allows detection of pulp blood changes in teeth submitted to in-office bleaching, but further studies are still required.

  7. Disease incidence is related to bleaching extent in reef-building corals.

    Science.gov (United States)

    Brandt, Marilyn E; McManus, John W

    2009-10-01

    Recent outbreaks of coral bleaching and disease have contributed to substantial declines in the abundance of reef-building coral. Significant attention has been paid to both phenomena in order to determine their effect on reef trajectories. Although each is positively correlated with high temperatures, few studies have explored the potential links between bleaching and disease. A longitudinal study of corals in the Florida Keys was therefore conducted during the 2005 Caribbean bleaching event to quantify bleaching extent and disease incidence in corals, and to determine whether they were related or if they acted as discrete phenomena. These data indicated that overall, a positive correlation exists between bleaching extent and disease incidence. However, the specific interactions between these two phenomena varied among disease bleaching combinations. Montastraea faveolata colonies with greater bleaching intensities later developed white plague (WP) infections. Meanwhile, Siderastrea siderea colonies with dark spot disease (DS) bleached more extensively than apparently healthy colonies. Finally, bleaching and black band disease (BB) co-occurred on Colpophyllia natans throughout the bleaching event. WP, BB, and bleaching are each independently capable of changing the structure of coral populations through loss of living tissue, and DS is an important indicator of reef health. Understanding the dynamics of how these mortality sources interact is critical to understanding mortality patterns and predicting how reef communities will respond to future events.

  8. High spatial variability in coral bleaching around Moorea (French Polynesia): patterns across locations and water depths.

    Science.gov (United States)

    Penin, Lucie; Adjeroud, Mehdi; Schrimm, Muriel; Lenihan, Hunter Stanton

    2007-02-01

    Mass coral bleaching events are one of the main threats to coral reefs. A severe bleaching event impacted Moorea, French Polynesia, between March and July 2002, causing 55+/-14% of colonies to suffer bleaching around the island. However, bleaching varied significantly across coral genera, locations, and as a function of water depth, with a bleaching level as high as 72% at some stations. Corals in deeper water bleached at a higher rate than those in shallow water, and the north coast was more impacted than the west coast. The relatively small scale of variability in bleaching responses probably resulted from the interaction between extrinsic factors, including hydrodynamic condition, and intrinsic factors, such as differential adaptation of the coral/algal association.

  9. Susceptibility to Coffee Staining during Enamel Remineralization Following the In-Office Bleaching Technique

    DEFF Research Database (Denmark)

    Mori, Aline Akemi; Lima, Fernanda Ferruzzi; Benetti, Ana Raquel

    2016-01-01

    PURPOSE: To assess in situ the enamel mineralization level and susceptibility to coffee staining after in-office bleaching. MATERIALS AND METHODS: Thirty-six human dental fragments assembled into intraoral devices were bleached with 35% hydrogen peroxide and treated as follows: (group 1) no contact...... with coffee; (group 2) immersion in a coffee solution for 30 minutes daily for 7 days, starting 1 week after bleaching; and (group 3) immersion in a coffee solution for 30 minutes daily for 14 days, starting immediately after bleaching. Enamel mineralization and color were assessed before bleaching (T1......), immediately after bleaching (T2), and after 7 (T3) and 14 days (T4). The CIE whiteness index (W*) and closeness to white (ΔW*) following bleaching and/or immersion in coffee were calculated. Data were analyzed with Friedman and Wilcoxon tests or Kruskal-Wallis and Mann-Whitney U-tests (α = 0.05). RESULTS...

  10. Monomer release from nanofilled and microhybrid dental composites after bleaching.

    Directory of Open Access Journals (Sweden)

    Masumeh Hasani Tabatabaee

    2014-02-01

    Full Text Available The aim of this study was to assess the effect of bleaching on elution of monomers from nanofilled and microhybrid composites.80 samples (5mm diameter and 3mm thickness of each composite were prepared. After curing, half of them were randomly polished. Each group was divided into 8 subgroups and immersed in water or 10%, 20% and 30% H2O2 for 3 or 8 hours. Eluted Bis-GMA (Bis-phenol A Glycidyl Dimethacrylate, TEGDMA (Triethyleneglycol Dimethacrylate, UDMA (Urethane Dimethacrylate and BisEMA (Bis-phenol A ethoxylate Dimethacrylate were quantified by high performance liquid chromatography and the results were analyzed by univariate ANOVA and t-test (P<0.05.Bleach significantly increased the overall release of monomers (P<0.001; TEGDMA was released more than Bis-GMA (P<0.001. Supreme released more TEGDMA compared to Z250 (P<0.001. Bleaching increased the release of this monomer (P<0.001. Increasing both the concentration of H2O2, and the immersion time, increased the release of TEGDMA (P<0.001. Polishing had no effect on release of this monomer (P=0.952. Supreme released more Bis-GMA than Z250 (P=0.000. The more concentrated H2O2 caused more elution of Bis-GMA (P= 0.003; while the effect of immersion time was not significant (P=0.824. Polishing increased the release of Bis-GMA (P=0.001. Neither the type of composite nor Bleaching had any effect on release of UDMA (P=0.972 and (P=0.811 respectively. Immersion duration increased the release of UDMA (P=0.002, as well as polishing (P=0.024.Bleaching increased the release of monomers. Nanofilled composites released more monomer than the microfilled.

  11. Tropical cyclone cooling combats region-wide coral bleaching.

    Science.gov (United States)

    Carrigan, Adam D; Puotinen, Marji

    2014-05-01

    Coral bleaching has become more frequent and widespread as a result of rising sea surface temperature (SST). During a regional scale SST anomaly, reef exposure to thermal stress is patchy in part due to physical factors that reduce SST to provide thermal refuge. Tropical cyclones (TCs - hurricanes, typhoons) can induce temperature drops at spatial scales comparable to that of the SST anomaly itself. Such cyclone cooling can mitigate bleaching across broad areas when well-timed and appropriately located, yet the spatial and temporal prevalence of this phenomenon has not been quantified. Here, satellite SST and historical TC data are used to reconstruct cool wakes (n=46) across the Caribbean during two active TC seasons (2005 and 2010) where high thermal stress was widespread. Upon comparison of these datasets with thermal stress data from Coral Reef Watch and published accounts of bleaching, it is evident that TC cooling reduced thermal stress at a region-wide scale. The results show that during a mass bleaching event, TC cooling reduced thermal stress below critical levels to potentially mitigate bleaching at some reefs, and interrupted natural warming cycles to slow the build-up of thermal stress at others. Furthermore, reconstructed TC wave damage zones suggest that it was rare for more reef area to be damaged by waves than was cooled (only 12% of TCs). Extending the time series back to 1985 (n = 314), we estimate that for the recent period of enhanced TC activity (1995-2010), the annual probability that cooling and thermal stress co-occur is as high as 31% at some reefs. Quantifying such probabilities across the other tropical regions where both coral reefs and TCs exist is vital for improving our understanding of how reef exposure to rising SSTs may vary, and contributes to a basis for targeting reef conservation.

  12. The cumulative impact of annual coral bleaching can turn some coral species winners into losers.

    Science.gov (United States)

    Grottoli, Andréa G; Warner, Mark E; Levas, Stephen J; Aschaffenburg, Matthew D; Schoepf, Verena; McGinley, Michael; Baumann, Justin; Matsui, Yohei

    2014-12-01

    Mass coral bleaching events caused by elevated seawater temperatures result in extensive coral loss throughout the tropics, and are projected to increase in frequency and severity. If bleaching becomes an annual event later in this century, more than 90% of coral reefs worldwide may be at risk of long-term degradation. While corals can recover from single isolated bleaching and can acclimate to recurring bleaching events that are separated by multiple years, it is currently unknown if and how they will survive and possibly acclimatize to annual coral bleaching. Here, we demonstrate for the first time that annual coral bleaching can dramatically alter thermal tolerance in Caribbean corals. We found that high coral energy reserves and changes in the dominant algal endosymbiont type (Symbiodinium spp.) facilitated rapid acclimation in Porites divaricata, whereas low energy reserves and a lack of algal phenotypic plasticity significantly increased susceptibility in Porites astreoides to bleaching the following year. Phenotypic plasticity in the dominant endosymbiont type of Orbicella faveolata did not prevent repeat bleaching, but may have facilitated rapid recovery. Thus, coral holobiont response to an isolated single bleaching event is not an accurate predictor of its response to bleaching the following year. Rather, the cumulative impact of annual coral bleaching can turn some coral species 'winners' into 'losers', and can also facilitate acclimation and turn some coral species 'losers' into 'winners'. Overall, these findings indicate that cumulative impact of annual coral bleaching could result in some species becoming increasingly susceptible to bleaching and face a long-term decline, while phenotypically plastic coral species will acclimatize and persist. Thus, annual coral bleaching and recovery could contribute to the selective loss of coral diversity as well as the overall decline of coral reefs in the Caribbean.

  13. Nonvital tooth bleaching: a review of the literature and clinical procedures.

    Science.gov (United States)

    Plotino, Gianluca; Buono, Laura; Grande, Nicola M; Pameijer, Cornelis H; Somma, Francesco

    2008-04-01

    Tooth discoloration varies in etiology, appearance, localization, severity, and adhesion to tooth structure. It can be defined as being extrinsic or intrinsic on the basis of localization and etiology. In this review of the literature, various causes of tooth discoloration, different bleaching materials, and their applications to endodontically treated teeth have been described. In the walking bleach technique the root filling should be completed first, and a cervical seal must be established. The bleaching agent should be changed every 3-7 days. The thermocatalytic technique involves placement of a bleaching agent in the pulp chamber followed by heat application. At the end of each visit the bleaching agent is left in the tooth so that it can function as a walking bleach until the next visit. External bleaching of endodontically treated teeth with an in-office technique requires a high concentration gel. It might be a supplement to the walking bleach technique, if the results are not satisfactory after 3-4 visits. These treatments require a bonded temporary filling or a bonded resin composite to seal the access cavity. There is a deficiency of evidence-based science in the literature that addresses the prognosis of bleached nonvital teeth. Therefore, it is important to always be aware of the possible complications and risks that are associated with the different bleaching techniques.

  14. Study of melanin bleaching after immunohistochemistry of melanin-containing tissues.

    Science.gov (United States)

    Shen, Hongwu; Wu, Wenqiao

    2015-04-01

    Melanin may interfere with immunohistochemical staining. The goal of this study was to investigate the effects of trichloroisocyanuric acid (TCCA) bleaching, potassium permanganate bleaching, and potassium dichromate bleaching on melanin, tissue antigen, and 3,3'-diaminobenzidine (DAB) using melanin-containing and melanin-free tissue samples. Our results demonstrated that all 3 bleaching methods efficiently bleached melanin and partially destroyed tissue antigen. In addition, potassium permanganate bleaching and potassium dichromate bleaching clearly destroyed DAB, whereas TCCA bleaching had no significant effect on DAB. Therefore, neither potassium permanganate nor potassium dichromate is an ideal solution, whereas TCCA might be an ideal solution for melanin bleaching after the immunohistochemical staining of melanin-containing tissues. After immunostaining followed by TCCA bleaching, the melanin could be completely removed in all 120 malignant melanoma tissue sections. Compared with the control, the DAB intensity was clear, and the tissue structure and cellular nuclei were well maintained. It is worth noting that TCCA should be freshly prepared before each experiment, and used within 2 hours of its preparation. In addition, sections should not be incubated with TCCA for over 30 minutes.

  15. Bacteria are not the primary cause of bleaching in the Mediterranean coral Oculina patagonica.

    Science.gov (United States)

    Ainsworth, T D; Fine, M; Roff, G; Hoegh-Guldberg, O

    2008-01-01

    Coral bleaching occurs when the endosymbiosis between corals and their symbionts disintegrates during stress. Mass coral bleaching events have increased over the past 20 years and are directly correlated with periods of warm sea temperatures. However, some hypotheses have suggested that reef-building corals bleach due to infection by bacterial pathogens. The 'Bacterial Bleaching' hypothesis is based on laboratory studies of the Mediterranean invading coral, Oculina patagonica, and has further generated conclusions such as the coral probiotic hypothesis and coral hologenome theory of evolution. We aimed to investigate the natural microbial ecology of O. patagonica during the annual bleaching using fluorescence in situ hybridization to map bacterial populations within the coral tissue layers, and found that the coral bleaches on the temperate rocky reefs of the Israeli coastline without the presence of Vibrio shiloi or bacterial penetration of its tissue layers. Bacterial communities were found associated with the endolithic layer of bleached coral regions, and a community dominance shift from an apparent cyanobacterial-dominated endolithic layer to an algal-dominated layer was found in bleached coral samples. While bacterial communities certainly play important roles in coral stasis and health, we suggest environmental stressors, such as those documented with reef-building corals, are the primary triggers leading to bleaching of O. patagonica and suggest that bacterial involvement in patterns of bleaching is that of opportunistic colonization.

  16. Response of coral assemblages to thermal stress: are bleaching intensity and spatial patterns consistent between events?

    Science.gov (United States)

    Penin, Lucie; Vidal-Dupiol, Jeremie; Adjeroud, Mehdi

    2013-06-01

    Mass bleaching events resulting in coral mortality are among the greatest threats to coral reefs, and are projected to increase in frequency and intensity with global warming. Achieving a better understanding of the consistency of the response of coral assemblages to thermal stress, both spatially and temporally, is essential to determine which reefs are more able to tolerate climate change. We compared variations in spatial and taxonomic patterns between two bleaching events at the scale of an island (Moorea Island, French Polynesia). Despite similar thermal stress and light conditions, bleaching intensity was significantly lower in 2007 (approximately 37 % of colonies showed signs of bleaching) than in 2002, when 55 % of the colonies bleached. Variations in the spatial patterns of bleaching intensity were consistent between the two events. Among nine sampling stations at three locations and three depths, the stations at which the bleaching response was lowest in 2002 were those that showed the lowest levels of bleaching in 2007. The taxonomic patterns of susceptibility to bleaching were also consistent between the two events. These findings have important implications for conservation because they indicate that corals are capable of acclimatization and/or adaptation and that, even at small spatial scales, some areas are consistently more susceptible to bleaching than others.

  17. Differential Response of Coral Assemblages to Thermal Stress Underscores the Complexity in Predicting Bleaching Susceptibility.

    Science.gov (United States)

    Chou, Loke Ming; Toh, Tai Chong; Toh, Kok Ben; Ng, Chin Soon Lionel; Cabaitan, Patrick; Tun, Karenne; Goh, Eugene; Afiq-Rosli, Lutfi; Taira, Daisuke; Du, Rosa Celia Poquita; Loke, Hai Xin; Khalis, Aizat; Li, Jinghan; Song, Tiancheng

    2016-01-01

    Coral bleaching events have been predicted to occur more frequently in the coming decades with global warming. The susceptibility of corals to bleaching during thermal stress episodes is dependent on many factors and an understanding of these underlying drivers is crucial for conservation management. In 2013, a mild bleaching episode ensued in response to elevated sea temperature on the sediment-burdened reefs in Singapore. Surveys of seven sites highlighted variable bleaching susceptibility among coral genera-Pachyseris and Podabacia were the most impacted (31% of colonies of both genera bleached). The most susceptible genera such as Acropora and Pocillopora, which were expected to bleach, did not. Susceptibility varied between less than 6% and more than 11% of the corals bleached, at four and three sites respectively. Analysis of four of the most bleached genera revealed that a statistical model that included a combination of the factors (genus, colony size and site) provided a better explanation of the observed bleaching patterns than any single factor alone. This underscored the complexity in predicting the coral susceptibility to future thermal stress events and the importance of monitoring coral bleaching episodes to facilitate more effective management of coral reefs under climate change.

  18. Differential Response of Coral Assemblages to Thermal Stress Underscores the Complexity in Predicting Bleaching Susceptibility.

    Directory of Open Access Journals (Sweden)

    Loke Ming Chou

    Full Text Available Coral bleaching events have been predicted to occur more frequently in the coming decades with global warming. The susceptibility of corals to bleaching during thermal stress episodes is dependent on many factors and an understanding of these underlying drivers is crucial for conservation management. In 2013, a mild bleaching episode ensued in response to elevated sea temperature on the sediment-burdened reefs in Singapore. Surveys of seven sites highlighted variable bleaching susceptibility among coral genera-Pachyseris and Podabacia were the most impacted (31% of colonies of both genera bleached. The most susceptible genera such as Acropora and Pocillopora, which were expected to bleach, did not. Susceptibility varied between less than 6% and more than 11% of the corals bleached, at four and three sites respectively. Analysis of four of the most bleached genera revealed that a statistical model that included a combination of the factors (genus, colony size and site provided a better explanation of the observed bleaching patterns than any single factor alone. This underscored the complexity in predicting the coral susceptibility to future thermal stress events and the importance of monitoring coral bleaching episodes to facilitate more effective management of coral reefs under climate change.

  19. Influence of post-bleaching time intervals on dentin bond strength.

    Science.gov (United States)

    Teixeira, Erica Cappelletto Nogueira; Turssi, Cecilia Pedroso; Hara, Anderson Takeo; Serra, Mônica Campos

    2004-01-01

    It has been reported that bond strength of resin to tooth structure can be reduced when the bonding procedure is carried out immediately after the bleaching treatment. This study evaluated the effect of bleaching of non-vital teeth bleaching on the shear bond strength (SBS) of composite resin/bovine dentin interface and the influence of delaying the bonding procedures for different time intervals following internal bleaching. According to a randomized block design, composite resin cylinders (Z100/Single bond - 3M) were bonded to the flattened dentin surface of two hundred and fifty-six teeth which had previously been subjected to four different treatments: SPH - sodium perborate + 30% hydrogen peroxide; SPW - sodium perborate + distilled water; CP - 37% carbamide peroxide; and CON - distilled water (control), each one followed by storage in artificial saliva for 0 (baseline), 7, 14, and 21 days after bleaching (n = 16). The bleaching agents in the pulp chambers were replaced every 7 days, over 4 weeks. The SBS test of the blocks was done using a universal testing machine. The ANOVA showed that there was no significant interaction between time and bleaching agents, and that the factor time was not statistically significant (p > 0.05). For the factor bleaching treatment, the Student's t-test showed that [CON = CP] > [SPW = SPH]. The bleaching of non-vital teeth affected the resin/dentin SBS values when sodium perborate mixed with 30% hydrogen peroxide or water was used, independently of the elapsed time following the bleaching treatment.

  20. Susceptibility of central Red Sea corals during a major bleaching event

    KAUST Repository

    Furby, Kathryn A.

    2013-01-04

    A major coral bleaching event occurred in the central Red Sea near Thuwal, Saudi Arabia, in the summer of 2010, when the region experienced up to 10-11 degree heating weeks. We documented the susceptibility of various coral taxa to bleaching at eight reefs during the peak of this thermal stress. Oculinids and agaricids were most susceptible to bleaching, with up to 100 and 80 % of colonies of these families, respectively, bleaching at some reefs. In contrast, some families, such as mussids, pocilloporids, and pectinids showed low levels of bleaching (<20 % on average). We resurveyed the reefs 7 months later to estimate subsequent mortality. Mortality was highly variable among taxa, with some taxa showing evidence of full recovery and some (e. g., acroporids) apparently suffering nearly complete mortality. The unequal mortality among families resulted in significant change in community composition following the bleaching. Significant factors in the likelihood of coral bleaching during this event were depth of the reef and distance of the reef from shore. Shallow reefs and inshore reefs had a higher prevalence of bleaching. This bleaching event shows that Red Sea reefs are subject to the same increasing pressures that reefs face worldwide. This study provides a quantitative, genus-level assessment of the vulnerability of various coral groups from within the Red Sea to bleaching and estimates subsequent mortality. As such, it can provide valuable insights into the future for reef communities in the Red Sea. © 2013 Springer-Verlag Berlin Heidelberg.

  1. Comparing the Effect of Different Bleaching Regims of Carbamide Peroxide on Microhardness of Z250 Composite

    Directory of Open Access Journals (Sweden)

    B Esmaeili

    2015-11-01

    Full Text Available Introduction: Bleaching products with oxidizing mechanism can exert side effects on the restorative materials existing in the oral cavity. Since bleaching agents are applied in different concentrations, the present study aimed to compare the effect of different bleaching regims of carbamide peroxide on microhardness of Z250 microhybride composite. Methods: In this in vitro study , 32 specimens of micro hybride composite (Z250 were made which were randomly divided into 4 subgroups (n=8: G1: bleached with10% carbamide peroxide 4 hours a day for 2 weeks G2: bleached with 16%carbamide peroxide 3 hours a day for 2 weeks G3: bleached with 22%carbamide peroxide 1hour a day for 2 weeks G4: the control subgroup stored in distilled water at 37◦c for 2 weeks. Microhardness of specimens was measured before and after bleaching using Vickers hardness testing machine. Moreover, the study data were analyzed statistically applying Anova and t-test (&alpha= 0.05. Results: This study findings revealed that using bleaching agent significantly decreased the  microhardness of composite resin in the bleaching groups compared to the control group, though the concentration of carbamide peroxide produced no significant effect on the microhardness value. (p>0.13 Conclusion: Bleaching therapy can cause a reduction in microhardness of Z250 composite and different concentrations of carbamide peroxide can reduce microhardness of Z250 to the same value.

  2. Susceptibility of central Red Sea corals during a major bleaching event

    Science.gov (United States)

    Furby, K. A.; Bouwmeester, J.; Berumen, M. L.

    2013-06-01

    A major coral bleaching event occurred in the central Red Sea near Thuwal, Saudi Arabia, in the summer of 2010, when the region experienced up to 10-11 degree heating weeks. We documented the susceptibility of various coral taxa to bleaching at eight reefs during the peak of this thermal stress. Oculinids and agaricids were most susceptible to bleaching, with up to 100 and 80 % of colonies of these families, respectively, bleaching at some reefs. In contrast, some families, such as mussids, pocilloporids, and pectinids showed low levels of bleaching (reefs 7 months later to estimate subsequent mortality. Mortality was highly variable among taxa, with some taxa showing evidence of full recovery and some (e.g., acroporids) apparently suffering nearly complete mortality. The unequal mortality among families resulted in significant change in community composition following the bleaching. Significant factors in the likelihood of coral bleaching during this event were depth of the reef and distance of the reef from shore. Shallow reefs and inshore reefs had a higher prevalence of bleaching. This bleaching event shows that Red Sea reefs are subject to the same increasing pressures that reefs face worldwide. This study provides a quantitative, genus-level assessment of the vulnerability of various coral groups from within the Red Sea to bleaching and estimates subsequent mortality. As such, it can provide valuable insights into the future for reef communities in the Red Sea.

  3. Effect of desensitizer application on shear bond strength of composite resin to bleached enamel

    Directory of Open Access Journals (Sweden)

    Maryam Khoroushi

    2013-01-01

    Full Text Available Objective: Tooth sensitivity is common after vital tooth bleaching. The aim of this study is to evaluate the effect of a desensitizing agent on shear bond strength of composite resin to bleached enamel; and determine whether a delay of one or two weeks in bonding procedure is sufficient subsequent to bleaching/desensitizer regimen. Materials and Methods: Buccal enamel surfaces of ninety-six human sound molars were prepared and divided into eight groups. The surfaces of specimens in Group 1 as negative control group were bonded by composite resin using the single bond adhesive. Specimens in Groups 2-4 were bleached with an at-home bleaching agent (Daywhite ACP. Relief ACP desensitizing gel alone was applied in Group 5. In Groups 6-8, specimens were bleached same as in Group 2 and relief ACP desensitizing gel was applied same as inGroup 5 subsequent to each bleaching session. Composite cylinders were bonded after 24 h, 7 days and 14 days in Groups 2-4, respectively, and also in Groups 6-8, respectively. The shear bond strengths of the cylinders were tested and data was analyzed using two-way ANOVA and Tukey test (α = 0.05. Results: The results showed that bleaching and bleaching/desensitizer regimens significantly reduced the bond strength of composite resin to enamel. However, desensitizer alone did not reduce bond strength. No statistically significant differences were found between bleaching and bleaching/desensitizer regarding bond strength. Conclusion: Bleaching or bleaching/desensitizer treatment significantly decreases bond strength of composite resin to enamel. In both regimens, adhesive bonding is recommended after two weeks.

  4. Valorisation of by Products from Bleached Eucalyptus Kraft Pulp Mill

    Science.gov (United States)

    Silva, M. C.; Lopes, O. R.; Colodette, J. L.; Porto, A. O.; Rieumont, J.; Chaussy, D.; Belgacem, M. N.; Silva, G. G.

    2008-08-01

    Three industrial wastes arising from bleached hardwood kraft pulps, namely: unbleached screen rejects (USR), effluent treatment (ETW), and eucalyptus bark (EB) were analyzed with the aim of their possible valorization as an alternative source of cellulose. Their morphological properties were determined using MorFi apparatus. For this study the sample bleached kraft pulp, BKP, was analyzed as a reference. Lignin and carbohydrate contents were also quantified. These by-products were studied as such (i.e. without careful purification) because we intended to find rational and low-cost way of valorization. In fact any additional operation will induce an over cost. The results obtained indicate that these industrial wastes can be potential raw material in fibre-based applications (paper, composites…), since they contain a high proportion of cellulose with preserved fibrillar morphology. Some of these materials have low lignin and inorganic residue contents.

  5. KINETICS OF DELIGNIFICATION AND CARBOHYDRATE DEGRADATION DURING OXYGEN BLEACHING

    Institute of Scientific and Technical Information of China (English)

    K.LNguyen

    2004-01-01

    Carbohydrate degradation during oxygen bleaching isassociated with cleavage reactions. It is apparent thatthe loss of the cellulose DPis strongly affected by(degree ofpolymisation) the extent of thedelignification. A strong linear correlation can beestablished between the DP of cellulose chains andthe residual lignin in the pulp. The Nuclear Growthconcept and Percolation Theory for heterogenoussystem can be combined to formulate kinetic modelsfor both the delignification and the degradation ofcarbohydrate. The models prediction is statisticallyrobust and can be applied to different pulps atdifferent bleachin~ conditions.

  6. A Preliminary Assessment of Coral Bleaching in Mozambique

    OpenAIRE

    1999-01-01

    The 1997-1998 El Nino southern oscillation (ENSO) caused elevated sea temperatures that resulted in global coral bleaching. Coral reefs constitute an important biological resource in terms of their complex biodiversity and are the basis for tropical reef fisheries and marine ecotourism. They represent one of Mozambique's main coastal assets and its coastal communities and growing tourism industry rely mainly on reef-based resources. Mozambican artisanal fisheries are largely centred on reefs ...

  7. Microscopic oxygen imaging based on fluorescein bleaching efficiency measurements

    DEFF Research Database (Denmark)

    Beutler, Martin; Heisterkamp, Ines M.; Piltz, Bastian

    2014-01-01

    Photobleaching of the fluorophore fluorescein in an aqueous solution is dependent on the oxygen concentration. Therefore, the time-dependent bleaching behavior can be used to measure of dissolved oxygen concentrations. The method can be combined with epi-fluorescence microscopy. The molecular sta...... concentrations. The method was demonstrated on nitrifying biofilms growing on snail and mussel shells, showing clear effects of metabolic activity on oxygen concentrations. © 2014 Wiley Periodicals, Inc....

  8. Symbiophagy as a cellular mechanism for coral bleaching.

    Science.gov (United States)

    Downs, Craig A; Kramarsky-Winter, Esti; Martinez, Jon; Kushmaro, Ariel; Woodley, Cheryl M; Loya, Yossi; Ostrander, Gary K

    2009-02-01

    Coral bleaching is a major contributor to the global declines of coral reefs. This phenomenon is characterized by the loss of symbiotic algae, their pigments or both. Despite wide scientific interest, the mechanisms by which bleaching occurs are still poorly understood. Here we report that the removal of the symbiont during light and temperature stress is achieved using the host's cellular autophagic-associated machinery. Host cellular and subcellular morphologies showed increased vacuolization and appearance of autophagic membranes surrounding a variety of organelles and surrounding the symbiotic algae. Markers of autophagy (Rab 7 and LAS) corroborate these observations. Results showed that during stress the symbiont vacuolar membrane is transformed from a conduit of nutrient exchange to a digestive organelle resulting in the consumption of the symbiont, a process we term symbiophagy. We posit that during a stress event, the mechanism maintaining symbiosis is destabilized and symbiophagy is activated, ultimately resulting in the phenomenon of bleaching. Symbiophagy may have evolved from a more general primordial innate intracellular protective pathway termed xenophagy.

  9. ALKALINE PEROXIDE BLEACHING OF HOT WATER TREATED WHEAT STRAW

    Directory of Open Access Journals (Sweden)

    Suvi Mustajoki

    2010-05-01

    Full Text Available The aim of this study was to evaluate the possibilities for chemical consumption reduction in P-P-Paa-P bleaching (P alkaline peroxide stage, Paa peracetic stage of hot water treated straw and the effect of the wheat straw variability on the process. Papermaking fibre production from wheat straw using such a process could be implemented on a small scale if chemical consumption was low enough to eliminate the need for chemical recovery. The pulp properties obtained with this process are equal to or even superior to the properties of wheat straw soda pulp. The possibility of enhancing the first peroxide stage with oxygen and pressure was studied. The possibility for substitution of sodium hydroxide partially with sodium carbonate was also investigated. The objective was to achieve International Standardization Organization (ISO brightness of 75%, with minimal sodium hydroxide consumption, whilst maintaining the pulp properties. The optimization of the peroxide bleaching is challenging if the final brightness target cannot be reduced. Results indicate that up to 25% of the sodium hydroxide could be substituted with sodium carbonate without losing brightness or affecting pulp properties. Another possibility is a mild alkali treatment between the hot water treatment and the bleaching sequence.

  10. Fracture resistance of bleached teeth restored with different procedures

    Directory of Open Access Journals (Sweden)

    Matheus Coelho Bandéca

    2012-08-01

    Full Text Available This study evaluated the fracture resistance of teeth submitted to internal bleaching and restored with different non-metallic post. Eighty mandibular incisors were endodontically treated and randomly divided in 10 groups (n = 8: G1- restored with composite resin (CR, G2- CR + fiber-reinforced composite post (FRC, Everstick post, Sticktech cemented with resin cement self-etch adhesive (RCS, Panavia F 2.0, Kuraray, G3- CR + FRC + self-adhesive resin cement (SRC, Breeze, Pentral Clinical, G4- CR+ glass fiber post (GF, Exacto Post, Angelus + RCS, G5- CR + GF + SRC. The G6 to G10 were bleached with hydrogen peroxide (HP and restored with the same restorative procedures used for G1 to G5, respectively. After 7 days storage in artificial saliva, the specimens were submitted to the compressive strength test (N at 0.5 mm/min cross-head speed and the failure pattern was identified as either reparable (failure showed until 2 mm below the cement-enamel junction or irreparable (the failure showed <2 mm or more below the cement-enamel. Data were analyzed by ANOVA and Tukey test (α = 0.05. No significant difference (p < 0.05 was found among G1 to G10. The results suggest that intracoronal bleaching did not significantly weaken the teeth and the failure patterns were predominately reparable for all groups. The non-metallic posts in these teeth did not improve fracture resistance.

  11. Assessment of the process of cottonseed oil bleaching in hexane

    Directory of Open Access Journals (Sweden)

    Megahed, Ola A.

    2002-12-01

    Full Text Available This work has been initiated to assess the feasibility of bleaching cottonseed oil in miscella as a processing step next to alkali refining in miscella. Alkali refining of cottonseed oil in miscella has several advantages over conventional refining technologies with respect to oil quality, oil losses and process cost. Therefore, the process efficiency of the bleaching of cottonseed oil in presence of hexane (at a volumetric ratio of 1:1, has been studied and compared to that without solvent. The process efficiency has been evaluated according to the decolourization capacity, the oil losses on spent earth, the filtration rate of the oil from the clay and the acidity of the bleached oil as well as its peroxide content. The bleaching in presence of hexane was carried out at 25ºC whereas that by conventional bleaching at 110ºC. Different clay loads were used in each of the two bleaching techniques and the colour indices of the oils before and after bleaching determined in each case. The results were used to predict Freundlich adsorption equations for the oil pigments in both cases. These equations were then used to predict the colour of the oils obtained by bleaching of refined oils of different grades. The results have shown that oil decolourization is more efficient in presence of solvent when the starting oil is of an acceptable grade and the reverse is true for low grade oils. Also, the possibility of oil oxidation during bleaching is less in presence of solvent. Moreover, the bleaching in miscella has proved two other additional advantages over conventional bleaching. The filtration of oil from clay is much faster in miscella bleaching and the oil losses on spent earth is lower. This will be reflected on the overall process economy.Este trabajo ha sido iniciado para evaluar la viabilidad de la decoloración del aceite de semilla de algodón en miscela como un paso de procesado próximo a la refinación alcalina en miscela. La refinaci

  12. Examination of native and carbamide peroxide-bleached human tooth enamel by atomic force microscopy.

    Science.gov (United States)

    Mahringer, Christoph; Fureder, Monika; Kastner, Markus; Ebner, Andreas; Hinterdorfer, Peter; Vitkov, Ljubomir; Hannig, Matthias; Kienberger, Ferry; Schilcher, Kurt

    2009-10-01

    Atomic force microscopy (AFM) was used to study the effects of bleaching on the morphology of the enamel surface with nanoscale resolution. Samples of human tooth enamel with native (pumiced) or fine-polished surfaces were examined before and after bleaching with 30% carbamide peroxide. The obtained profilometric AFM data revealed significant morphological surface alterations. After 1 h of bleaching, the surface roughness increased significantly from 19 +/- 4nm to 33 +/- 5 nm. Six-hour bleaching did not produce any significant further increase in enamel surface roughness. The interrod junction depth raised more than twice after 1 h of bleaching. After 6 h of bleaching, a further and significant increase in interrod junction depth was recorded. This alteration might be a consequence of oxidation and a subsequent partial lysis of the tooth enamel matrix proteins.

  13. Trace elementary concentration in enamel after dental bleaching using HI-ERDA

    Energy Technology Data Exchange (ETDEWEB)

    Added, N. [GFAA, Depto de Fisica Nuclear, IFUSP, University of Sao Paulo, Travessa R da rua do Matao 187, Cidade Universitaria, Caixa Postal 66318, CEP 05508-970 Sao Paulo, SP (Brazil)]. E-mail: nemitala@dfn.if.usp.br; Rizzutto, M.A. [GFAA, Depto de Fisica Nuclear, IFUSP, University of Sao Paulo, Travessa R da rua do Matao 187, Cidade Universitaria, Caixa Postal 66318, CEP 05508-970 Sao Paulo, SP (Brazil); Curado, J.F. [GFAA, Depto de Fisica Nuclear, IFUSP, University of Sao Paulo, Travessa R da rua do Matao 187, Cidade Universitaria, Caixa Postal 66318, CEP 05508-970 Sao Paulo, SP (Brazil); Francci, C. [School of Dentistry, University of Sao Paulo (Brazil); Markarian, R. [School of Dentistry, University of Sao Paulo (Brazil); Mori, M. [School of Dentistry, University of Sao Paulo (Brazil)

    2006-08-15

    Changes of elementary concentrations in dental enamel after a bleaching treatment with different products, is presented, with special focus on the oxygen contribution. Concentrations for Ca, P, O and C and some other trace elements were obtained for enamel of bovine incisor teeth by HI-ERDA measurements using a {sup 35}Cl incident beam and an ionization chamber. Five groups of teeth with five samples each were treated with a different bleaching agents. Each tooth had its crown sectioned in two halves, one for bleaching test and one the other used as a control. Average values of C/Ca, O/Ca, F/Ca enrichment factors were found. The comparison between bleached and non-bleached halves indicates that bleaching treatment did not affect the mineral structure when low-concentration whitening systems were used. The almost constant oxygen concentration in enamel, suggests little changes due to whitening therapy.

  14. Etiology and prevention of external cervical root resorption associated to teeth bleaching

    Directory of Open Access Journals (Sweden)

    Eliane Mendes da SILVA

    2010-03-01

    Full Text Available Introduction and objective: Esthetic dentistry has been prioritizedand the desire for whiter teeth has been increasingly present in dental offices, since whiter teeth tend to indicate health, beauty, youth and a more attractive smile. Teeth bleaching is a conservative method widely used to restore the original color of darkened teeth. However, possible relations with the external cervical root resorption have concerned many researchers and clinicians. Literature review: There are many mechanisms that can activate the external cervical root resorption, such as: chemical and physical action of the bleaching materials used, morphology of the cementoenamel junction associated to the immune system, material concentration, traumas and bleaching technique used. Conclusion: Therefore, considering many factors that are still not conclusive, preventing deleterious effects on teeth and support structures, care must be taken when choosing bleaching agent and bleaching technique, as well as when selecting each case, beyond a proper restoration after teeth bleaching.

  15. Comparative study of the effects of two bleaching agents on oral microbiota.

    Science.gov (United States)

    Alkmin, Yara Tardelli; Sartorelli, Renata; Flório, Flávia Martão; Basting, Roberta Tarkany

    2005-01-01

    This study evaluated the in vivo effects of bleaching agents containing 10% carbamide peroxide (Platinum/Colgate) or 7.5% hydrogen peroxide (Day White 2Z/Discus Dental) on mutans Streptococcus during dental bleaching. The products were applied on 30 volunteers who needed dental bleaching. In each volunteer, one of the two bleaching agents was used on both dental arches one hour a day for three weeks. Analysis of the bacterial counts was made by collecting saliva before (baseline values), during (7 and 21 days) bleaching treatments and 14 days posttreatment. The Friedman non-parametric analysis (alpha=0.05) found no differences in microorganism counts at different times for each group for both agents (p>0.05). The Mann Whitney nonparametric test (alpha=0.05) showed no differences in micro-organism counts for both agents (p>0.05). Different bleaching agents did not change the oral cavity mutans Streptococcus counts.

  16. RESPONSE SURFACE METHODOLOGY APPROACH FOR OPTIMIZATION OF FLAX SEED OIL BLEACHING PROCESS

    Directory of Open Access Journals (Sweden)

    Miroslav Ondrejovič

    2013-10-01

    Full Text Available Flax seed is an important source of omega-3 polyunsaturated fatty acids essential for human physiology. For low oxidation stability, specific taste and concomitant color compounds this oil is poorly applicable as nutraceutical additive. The aim of this study was optimization of flax seed oil bleaching. The optimal conditions for the bleaching process were determined using response surface methodology. A central composite design was used to investigate the effects of three independent variables, namely solid to liquid ratio, temperature and time, to output parameters of the bleaching process such as crude oil color expressed as optical density at 490 nm, acid and peroxide value. Calculated optimal conditions for the bleaching, expressed by the optical density of the oil were as follows: temperature 50°C, bleaching time 77 minutes and solid-liquid ratio 56 g of bleaching agent to 1 liter of oil.

  17. Assessment of enamel roughness of bovine teeth bleached with and without laser activation

    OpenAIRE

    Rafael Canzi Almada de Paula XAVIER; Rodrigo Mario Pontoni MIRANDA; Gonzaga, Carla Castiglia; Maria da Graça Kfouri LOPES

    2009-01-01

    Introduction: Currently, due to increased demand of patients anddentists for aesthetic treatments, bleaching procedures have becomeroutine in dental treatment. The development of new techniques andmaterials, such as laser-activated bleaching, has gained popularity.However, due to the small number of publications in this area, theiraggressiveness to the enamel is still not known. Objective: To determine the roughness of the enamel surface of bovine teeth bleached with and without laser activat...

  18. Human Pulpal Reaction to the Modified McInnes Bleaching Technique,

    Science.gov (United States)

    1983-05-01

    Modified McInnes Bleaching Technique is specifically recommended for the treatment of teeth exhibiting endemic dental fluorosis because of its superficial...SUMARY The Modified Mclnnes Bleaching Technique has been recommended for removing the stain of endemic dental fluorosis . This study was designed to...stain from teeth. Ariz Dent J 1966; 12:13-15. 3. Bailey RW, Christen AC. Bleaching of vital teeth stained with endemic dental fluorosis . Oral Surg 1968

  19. Effect of three nanobiomaterials on the surface roughness of bleached enamel

    OpenAIRE

    2015-01-01

    Background: The ever-increasing demand for enhanced esthetic appearance has resulted in significant developments in bleaching products. However, the enamel surface roughness (SR) might be negatively affected by bleaching agents. This in vitro study was undertaken to compare the effects of three nanobiomaterials on the enamel SR subsequent to bleaching. Materials and Methods: The crowns of six extracted intact nonerupted human third molars were sectioned. Five dental blocks measuring 2 mm × 3 ...

  20. Durability of bleaching results achieved with 15% carbamide peroxide and 38% hydrogen peroxide in vitro.

    Science.gov (United States)

    Knösel, Michael; Reus, Monika; Rosenberger, Albert; Attin, Thomas; Ziebolz, Dirk

    2011-01-01

    The aim of this study was to assess the durability of bleaching results achieved with (1) 15% carbamide peroxide home bleaching and (2) 38% hydrogen peroxide in-office bleaching. A total of 231 extracted anterior teeth were randomly divided into three groups (n = 77 in each group) with comparable mean baseline L*-values (68.24 ± 0.8): a non-bleached control group A, a 15% carbamide peroxide group B (5 bleaching intervals of 8 hours), and a 38% hydrogen peroxide group C (3 intervals of 15 minutes). Durability of bleaching was assessed by comparing CIE-L*a*b* data after intervals of 2, 4, 12, and 26 weeks from baseline. Both bleaching regimes initially produced a highly significant increase in lightness parameter L*, with no significant difference between the respective bleaching regimes (B: 68.23 / 72.48; C: 68.32 / 73.25). Six months after starting the trial, L*-values for group B yielded no significant differences compared to baseline (69.55), whereas L*-values for group C were still significantly raised (69.91), despite a highly significant decrease when compared to initial bleaching results. In both treatment groups, there was a lasting response to bleaching in terms of CIE-a* and -b* value decreases. Results for both home- and in-practice regimes were found to be similar for about 12 weeks. However, in-office results were longer lasting, despite the shorter treatment intervals. Summarized bleaching effects, in terms of delta E values, revealed no significant differences between treatment groups and the control group after 6 months, indicating an abatement of the bleaching results achieved.

  1. A Study for Tooth Bleaching via Carbamide Peroxide-Loaded Hollow Calcium Phosphate Spheres

    Directory of Open Access Journals (Sweden)

    Tao Qin

    2016-12-01

    Full Text Available The objective of this study was to investigate if a prolonged bleaching effect of carbamide peroxide-loaded hollow calcium phosphate spheres (HCPS can be achieved. HCPS was synthesized via a hydrothermal reaction method. Carbamide peroxide (CP was-loaded into HCPS by mixing with distilled water as solvent. We developed two bleaching gels containing CP-loaded HCPS: one gel with low HP concentration as at-home bleaching gel, and one with high HP concentration as in-office gel. Their bleaching effects on stained human permanent posterior teeth were investigated by measuring the color difference before and after bleaching. The effect of gels on rhodamine B degradation was also studied. To investigate the potential effect of remineralization of using HCPS, bleached teeth were soaked in phosphate buffer solution (PBS containing calcium and magnesium ions. Both bleaching gels had a prolonged whitening effect, and showed a strong ability to degrade rhodamine B. After soaking in PBS for 3 days, remineralization was observed at the sites where HCPS attached to the teeth surface. CP-loaded HCPS could prolong the HP release behavior and improve the bleaching effect. HCPS was effective in increasing the whitening effect of carbamide peroxide and improving remineralization after bleaching process.

  2. Changes in Caribbean coral disease prevalence after the 2005 bleaching event.

    Science.gov (United States)

    Cróquer, Aldo; Weil, Ernesto

    2009-11-16

    Bleaching events and disease epizootics have increased during the past decades, suggesting a positive link between these 2 causes in producing coral mortality. However, studies to test this hypothesis, integrating a broad range of hierarchical spatial scales from habitats to distant localities, have not been conducted in the Caribbean. In this study, we examined links between bleaching intensity and disease prevalence collected from 6 countries, 2 reef sites for each country, and 3 habitats within each reef site (N = 6 x 2 x 3 = 36 site-habitat combinations) during the peak of bleaching in 2005 and a year after, in 2006. Patterns of disease prevalence and bleaching were significantly correlated (Rho = 0.58, p = 0.04). Higher variability in disease prevalence after bleaching occurred among habitats at each particular reef site, with a significant increase in prevalence recorded in 4 of the 10 site-habitats where bleaching was intense and a non-significant increase in disease prevalence in 18 out of the 26 site-habitats where bleaching was low to moderate. A significant linear correlation was found (r = 0.89, p = 0.008) between bleaching and the prevalence of 2 virulent diseases (yellow band disease and white plague) affecting the Montastraea species complex. Results of this study suggest that if bleaching events become more intense and frequent, disease-related mortality of Caribbean coral reef builders could increase, with uncertain effects on coral reef resilience.

  3. Annual coral bleaching and the long-term recovery capacity of coral.

    Science.gov (United States)

    Schoepf, Verena; Grottoli, Andréa G; Levas, Stephen J; Aschaffenburg, Matthew D; Baumann, Justin H; Matsui, Yohei; Warner, Mark E

    2015-11-22

    Mass bleaching events are predicted to occur annually later this century. Nevertheless, it remains unknown whether corals will be able to recover between annual bleaching events. Using a combined tank and field experiment, we simulated annual bleaching by exposing three Caribbean coral species (Porites divaricata, Porites astreoides and Orbicella faveolata) to elevated temperatures for 2.5 weeks in 2 consecutive years. The impact of annual bleaching stress on chlorophyll a, energy reserves, calcification, and tissue C and N isotopes was assessed immediately after the second bleaching and after both short- and long-term recovery on the reef (1.5 and 11 months, respectively). While P. divaricata and O. faveolata were able to recover from repeat bleaching within 1 year, P. astreoides experienced cumulative damage that prevented full recovery within this time frame, suggesting that repeat bleaching had diminished its recovery capacity. Specifically, P. astreoides was not able to recover protein and carbohydrate concentrations. As energy reserves promote bleaching resistance, failure to recover from annual bleaching within 1 year will likely result in the future demise of heat-sensitive coral species.

  4. OSL response bleaching of BeO samples, using fluorescent light and blue LEDs

    Energy Technology Data Exchange (ETDEWEB)

    Groppo, Daniela Piai; Caldas, Linda V.E., E-mail: dpgroppo@usp.br [Instituto de Pesquisas Energeticas e Nucleres (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The optically stimulated luminescence (OSL) is widely used as a dosimetric technique for many applications. In this work, the OSL response bleaching of BeO samples was studied. The samples were irradiated using a beta radiation source ({sup 90}Sr+{sup 90}Y); the bleaching treatments (fluorescent light and blue LEDs) were performed, and the results were compared. Various optical treatment time intervals were tested until reaching the complete bleaching of the OSL response. The best combination of the time interval and bleaching type was analyzed. (author)

  5. Inflammatory response of human dental pulp to at-home and in-office tooth bleaching

    Directory of Open Access Journals (Sweden)

    Maysa Magalhães Vaz

    Full Text Available ABSTRACT Tooth bleaching is a technique of choice to obtain a harmonious smile, but bleaching agents may damage the dental pulp. Objective: This study evaluated the inflammatory responses of human dental pulp after the use of two bleaching techniques. Material and Methods: Pulp samples were collected from human third molars extracted for orthodontic reasons and divided into three groups: control - no tooth bleaching (CG (n=7; at-home bleaching with 15% carbamide peroxide (AH (n = 10, and in-office bleaching with 38% hydrogen peroxide (IO (n=12. Pulps were removed and stained with hematoxylin-eosin for microscopic analysis of inflammation intensity, collagen degradation, and pulp tissue organization. Immunohistochemistry was used to detect mast cells (tryptase+, blood vessels (CD31+, and macrophages (CD68+. Chi-square, Kruskal-Wallis, and Mann Whitney tests were used for statistical analysis. The level of significance was set at p0.05. No mast cells were found in the pulp samples analyzed. Conclusion: In-office bleaching with 38% hydrogen peroxide resulted in more intense inflammation, higher macrophages migration, and greater pulp damage then at-home bleaching with 15% carbamide peroxide, however, these bleaching techniques did not induce migration of mast cells and increased the number of blood vessels.

  6. Effect of bleaching whey on sensory and functional properties of 80% whey protein concentrate.

    Science.gov (United States)

    Jervis, S; Campbell, R; Wojciechowski, K L; Foegeding, E A; Drake, M A; Barbano, D M

    2012-06-01

    Whey is a highly functional food that has found widespread use in a variety of food and beverage applications. A large amount of the whey proteins produced in the United States is derived from annatto-colored Cheddar cheese. Color from annatto is undesirable in whey and must be bleached. The objective of this study was to compare 2 commercially approved bleaching agents, benzoyl peroxide (BP) and hydrogen peroxide (HP), and their effects on the flavor and functionality of 80% whey protein concentrate (WPC80). Colored and uncolored liquid wheys were bleached with BP or HP, and then ultrafiltered, diafiltered, and spray-dried; WPC80 from unbleached colored and uncolored Cheddar whey were manufactured as controls. All treatments were manufactured in triplicate. The WPC80 were then assessed by sensory, instrumental, functionality, color, and proximate analysis techniques. The HP-bleached WPC80 were higher in lipid oxidation compounds (specifically hexanal, heptanal, octanal, nonanal, decanal, dimethyl disulfide, and 1-octen-3-one) and had higher fatty and cardboard flavors compared with the other unbleached and BP-bleached WPC80. The WPC80 bleached with BP had lower norbixin concentrations compared with WPC80 bleached with HP. The WPC powders differed in Hunter color values (L, a, b), with bleached powders being more white, less red, and less yellow than unbleached powders. Bleaching with BP under the conditions used in this study resulted in larger reductions in yellowness of the powders made from whey with annatto color than did bleaching with HP. Functionality testing demonstrated that whey bleached with HP treatments had more soluble protein after 10 min of heating at 90°C at pH 4.6 and pH 7 than the no-bleach and BP treatments, regardless of additional color. Overall, HP bleaching caused more lipid oxidation products and subsequent off-flavors compared with BP bleaching. However, heat stability of WPC80 was enhanced by HP bleaching compared with control or BP-bleached

  7. Bleached Porites compressa and Montipora capitata corals catabolize δ13C-enriched lipids

    Science.gov (United States)

    Grottoli, Andréa G.; Rodrigues, Lisa J.

    2011-09-01

    Corals rely on stored energy reserves (i.e., lipids, carbohydrates, and protein) to survive bleaching events. To better understand the physiological implications of coral bleaching on lipid catabolism and/or synthesis, we measured the δ13C of coral total lipids (δ13CTL) in experimentally bleached (treatment) and non-bleached (control) Porites compressa and Montipora capitata corals immediately after bleaching and after 1.5 and 4 months of recovery on the reef. Overall δ13CTL values in treatment corals were significantly lower than in control corals because of a 1.9 and 3.4‰ decrease in δ13CTL immediately after bleaching in P. compressa and M. capitata, respectively. The decrease in δ13CTL coincided with decreases in total lipid concentration, indicating that corals catabolized δ13C-enriched lipids. Since storage lipids are primarily depleted during bleaching, we hypothesize that they are isotopically enriched relative to other lipid classes. This work further helps clarify our understanding of changes to coral metabolism and biogeochemistry when bleached and helps elucidate how lipid classes may influence recovery from bleaching and ultimately coral survival.

  8. Bleached phase holograms exposed on Agfa-Gevaert 10E75 NAH plates

    Science.gov (United States)

    Kumar, S.; Singh, K.

    1991-02-01

    An experimental study has been made of the diffraction efficiency, scattering and stability against printout effect of bleached, photographically recorded two- beam interference gratings using Agfa-Gevaert 10E75 NAH plates. The efficiency is increased by using bleaching processes that convert the silver image into a dielectric image. Plots of the diffraction efficiency and scattering against exposure, and variation of the maximum diffraction efficiency as a function of departure from the Bragg angle, and exposure to white light, for various bleaching processes, are given. A maximum diffraction efficiency of approximately 54% has been achieved by using a potassium iodide and iodine bleach process.

  9. EFFECT OF LAST STAGE BLEACHING WITH PERACETIC ACID ON BRIGHTNESS DEVELOPMENT AND PROPERTIES OF EUCALYPTUS PULP

    Directory of Open Access Journals (Sweden)

    Denise P. Barros

    2010-05-01

    Full Text Available Investigation of last stage bleaching with peracetic acid is the main subject of this paper. Proper conditions were established to apply peracetic acid as the last bleaching stage of the D(EpD/Paa, DHT(EpD/Paa, A/D(EpD/Paa, DHT/Q(POPaa and Z/ED/Paa sequences. In addition, the impact of last stage bleaching with Paa on pulp refinability and strength properties was determined. Peracetic acid was consumed relatively fast when applied as the last stage of ECF bleaching sequences. A reaction time of 120 min at 75 oC and pH 5.0 is seemingly adequate regardless of the Paa dose, in the range of 1-5 kg/odt pulp and bleaching sequence. The optimum dose of Paa depends upon the sequence under investigation. In general the Paa application as last bleaching stage caused slight decrease in pulp viscosity, kappa number and HexA content but had no significant effect on pulp reversion and L*a*b* coordinates. The refinability and bonding strength properties of the pulps bleached with the sequences DHT(EpDD and DHT(EpD/Paa were quite similar when the pH of the last bleaching stage of both sequences were near 5. These properties improved slightly when Paa bleaching pH was raised to 8.5.

  10. Impacts of the 1998 and 2010 mass coral bleaching events on the Western Gulf of Thailand

    Science.gov (United States)

    Sutthacheep, Makamas; Yucharoen, Mathinee; Klinthong, Wanlaya; Pengsakun, Sittiporn; Sangmanee, Kanwara; Yeemin, Thamasak

    2013-11-01

    A long-term study of coral reef ecology in the Gulf of Thailand provides a good opportunity to examine the temporal variation on the impact of mass coral bleaching at those reef sites. We compared the bleaching and mortality of corals between the mass bleaching events in 1998 and 2010 at a coral community in the Western Gulf of Thailand. The aim was to identify the coral species which were most likely to suffer from (and to be able to tolerate) changes in seawater temperature. Significant differences in the susceptibility of the coral taxa to bleaching events between the years 1998 and 2010 and among coral species were documented. Bleaching was significantly different between the most dominant corals. Diploastrea heliopora was the most resistant coral to bleaching in both years. Some coral species showed more resistance to bleaching in 2010. The coral mortality following the mass bleaching events in 1998 and 2010 varied significantly between the years and the coral taxa. Mortality of some dominant coral taxa was also lower in 2010. Seven coral species, i.e. Astreopora myriophthalma, Pachyseris rugosa, Turbinaria mesenterina, Goniastrea pectinata, Favia pallida, F. maritima, Favites halicora, Platygyra daedalea and Galaxea fascicularis, were tolerant to the coral bleaching events. An ecosystem-based approach to managing coral reefs in the Gulf of Thailand is needed to identify appropriate marine protected area networks and to strengthen marine and coastal resource policies in order to build coral reef resilience.

  11. Influence of fluoride-containing adhesives and bleaching agents on enamel bond strength

    Directory of Open Access Journals (Sweden)

    Vanessa Cavalli

    2012-12-01

    Full Text Available This study evaluated the influence of fluoride-containing carbamide peroxide (CP bleaching agents and adhesive systems on bonded enamel interfaces that are part of the dynamic pH cycling and thermal cycling models. The buccal surfaces of 60 bovine incisors were restored with a composite resin and bonded with three- and two-step, etch-and-rinse, fluoride-containing adhesives, Optibond FL (FL and Optibond Solo Plus (SP, respectively. Restored teeth were subjected to thermal cycling to age the interface. Both SP and FL adhesive-restored teeth were bleached (n = 10 with 10% CP (CP and 10% CP + fluoride (CPF or were left unbleached (control. Bleaching was performed for 14 days simultaneously with pH cycling, which comprised of 14 h of remineralization, 2 h of demineralization and 8 h of bleaching. The control groups (FL and SP were stored in remineralizing solution during their bleaching periods and were also subjected to carious lesion formation. Parallelepiped-shaped samples were obtained from the bonded interface for microtensile bond strength (∝TBS testing. The enamel ∝TBS of the FL and SP groups (control, not bleached were higher (p FL + CPF = FL + CP and SP > SP + CPF = SP + CP. The groups subjected to treatment with the fluoride-containing bleaching agents exhibited similar ∝TBS compared to regular bleaching agents. Bleaching agents, regardless of whether they contained fluoride, decreased enamel bond strength.

  12. Influence of fluoride-containing adhesives and bleaching agents on enamel bond strength.

    Science.gov (United States)

    Cavalli, Vanessa; Liporoni, Priscila Cristiane Suzy; Rego, Marcos Augusto do; Berger, Sandrine Bittencourt; Giannini, Marcelo

    2012-01-01

    This study evaluated the influence of fluoride-containing carbamide peroxide (CP) bleaching agents and adhesive systems on bonded enamel interfaces that are part of the dynamic pH cycling and thermal cycling models. The buccal surfaces of 60 bovine incisors were restored with a composite resin and bonded with three- and two-step, etch-and-rinse, fluoride-containing adhesives, Optibond FL (FL) and Optibond Solo Plus (SP), respectively. Restored teeth were subjected to thermal cycling to age the interface. Both SP and FL adhesive-restored teeth were bleached (n = 10) with 10% CP (CP) and 10% CP + fluoride (CPF) or were left unbleached (control). Bleaching was performed for 14 days simultaneously with pH cycling, which comprised of 14 h of remineralization, 2 h of demineralization and 8 h of bleaching. The control groups (FL and SP) were stored in remineralizing solution during their bleaching periods and were also subjected to carious lesion formation. Parallelepiped-shaped samples were obtained from the bonded interface for microtensile bond strength (μTBS) testing. The enamel μTBS of the FL and SP groups (control, not bleached) were higher (p FL > FL + CPF = FL + CP and SP > SP + CPF = SP + CP). The groups subjected to treatment with the fluoride-containing bleaching agents exhibited similar μTBS compared to regular bleaching agents. Bleaching agents, regardless of whether they contained fluoride, decreased enamel bond strength.

  13. Use of the LM-OSL technique for the detection of partial bleaching in quartz

    DEFF Research Database (Denmark)

    Larsen, N.A.; Bulur, E.; Bøtter-Jensen, L.;

    2000-01-01

    is known as linear modulation OSL (LM-OSL). In controlled laboratory conditions, this technique has been employed to study the ease-of-bleaching of the trapped charge in quartz by comparing the OSL curves of quartz aliquots which have been either: (1) fully bleached, followed by a laboratory dose of beta...... -irradiation, or (2) partially bleached, followed by the laboratory beta -dose. The ratio of the OSL signals due to the beta -dose from the partly and fully bleached aliquots is illustrated to be a potential indicator of the degree of optical resetting of the OSL signal in dating material. The key parameter...

  14. Evaluation of peanut hulls as an alternative to bleaching clays

    Directory of Open Access Journals (Sweden)

    Hassanein, M. M. M.

    2011-09-01

    Full Text Available Peanut hulls (PNH were carbonized at different temperatures, times, and evaluated at different concentrations as an alternative to bleaching clays. Evaluation of bleached crude soybean oil with PNH was based on their delta free fatty acids, reduction in peroxide value (PV, reduction in phospholipids (PL and bleachability. The performance of several commercially used bleaching clays was evaluated, for comparison. Mixtures were formulated including: PNH and Tonsil -N (TN, PNH and Fuller’s earth (FE and PNH and O-passive (OP and examined. The oxidative stability of oils was determined. Results for the investigated commercial bleaching clays revealed: TN > FE > F > TF > OP. Highest reduction in PV and PL, and highest bleachability were achieved for soybean oil bleached with 2% PNH carbonized at 500°C for 30 min (PNH”. Mixtures of PNH” with the three chosen bleaching clays indicated that 1PNH”: 2TN gave the highest bleachability. CSO was miscella bleached in hexane using PNH” and resulted in an appreciable improvement in all oil characteristics, especially in bleachability. Oxidative stability of oils was in the following order: TN > control > FE > PNH” with Induction period values of 23,1 > 6,43 > 5,73 > 2,85 h, respectively.

    Las cáscaras de maní (PNH fueron carbonizadas a diferentes temperaturas y tiempos, y utilizadas a diferentes concentraciones como una alternativa a las tierras decolorantes. La evaluación de un aceite de soja decolorado con PNH se ha basado en sus ácidos grasos libres, reducción del índice de peróxidos (PV, reducción de los fosfolípidos (PL, y en la blanqueabilidad. El rendimiento de varias tierras decolorantes de uso comercial fue evaluado y comparado con el de PNH carbonizada. Las mezclas formuladas incluían: PNH y Tonsil-N (TN, PNH y tierras de Fuller (FE y PNH y O-pasivo (OP. La estabilidad oxidativa de los aceites resultantes fue determinada. Los resultados revelaron que la efectividad de la

  15. Effect of coffe and a cola-based soft drink on the color stability of bleached bovine incisors considering the time elapsed after bleaching

    Science.gov (United States)

    PIROLO, Rodrigo; MONDELLI, Rafael Francisco Lia; CORRER, Gisele Maria; GONZAGA, Carla Castiglia; FURUSE, Adilson Yoshio

    2014-01-01

    There is no consensus about the waiting time necessary for the patient to start consuming beverages containing colorants again after bleaching. Objective: To evaluate the influence of beverages with coloring agents on bleached bovine incisors considering the time elapsed after bleaching. Materials and methods: Sixty bovine incisors were bleached with 35% hydrogen peroxide for in-office use (Whiteness HP Max) and divided into 10 groups. The color was evaluated with a spectrophotometer (Spectro Shade MICRO) before and after bleaching, employing the CIE-Lab system. After bleaching, the teeth were exposed for 5 min to coffee or cola-based soft drink (CBSD) at different periods after bleaching: 10 min, 1 h, 24 h, 48 h, and 72 h. Color (∆E) and lightness (∆L) variations were obtained from the CIE-Lab coordinates. Data were subjected to two-way ANOVA and Tukey HSD tests (p<0.05). Results: Significant differences were observed between groups for both the ∆L and ∆E values (p<0.001). All specimens presented a decrease in brightness (negative ∆L). The highest ∆E values were observed for teeth stained with a CBSD at 10 min and 1 h (4.12 and 4.16, respectively). Teeth pigmented with coffee presented ∆E values below 3.3 units for all evaluation times. Conclusion: The exposure to coffee after bleaching causes less color changes than the exposure to a CBSD regardless of the time after bleaching. PMID:25075672

  16. Effect of coffe and a cola-based soft drink on the color stability of bleached bovine incisors considering the time elapsed after bleaching

    Directory of Open Access Journals (Sweden)

    Rodrigo PIROLO

    2014-12-01

    Full Text Available There is no consensus about the waiting time necessary for the patient to start consuming beverages containing colorants again after bleaching. Objective: To evaluate the influence of beverages with coloring agents on bleached bovine incisors considering the time elapsed after bleaching. Materials and methods: Sixty bovine incisors were bleached with 35% hydrogen peroxide for in-office use (Whiteness HP Max and divided into 10 groups. The color was evaluated with a spectrophotometer (Spectro Shade MICRO before and after bleaching, employing the CIE-Lab system. After bleaching, the teeth were exposed for 5 min to coffee or cola-based soft drink (CBSD at different periods after bleaching: 10 min, 1 h, 24 h, 48 h, and 72 h. Color (∆E and lightness (∆L variations were obtained from the CIE-Lab coordinates. Data were subjected to two-way ANOVA and Tukey HSD tests (p<0.05. Results: Significant differences were observed between groups for both the ∆L and ∆E values (p<0.001. All specimens presented a decrease in brightness (negative ∆L. The highest ∆E values were observed for teeth stained with a CBSD at 10 min and 1 h (4.12 and 4.16, respectively. Teeth pigmented with coffee presented ∆E values below 3.3 units for all evaluation times. Conclusion: The exposure to coffee after bleaching causes less color changes than the exposure to a CBSD regardless of the time after bleaching.

  17. Efficacy of a novel at-home bleaching technique with carbamide peroxides modified by CPP-ACP and its effect on the microhardness of bleached enamel.

    Science.gov (United States)

    Borges, B C D; Borges, J S; de Melo, C D; Pinheiro, I V A; Santos, A J S Dos; Braz, R; Montes, M A J R

    2011-01-01

    This study was designed to evaluate in vitro the efficacy of a novel at-home bleaching technique using 10% or 16% carbamide peroxide modified by casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and its influence on the microhardness of bleached enamel. A total of 40 bovine incisors were divided into four groups (n=10) according to the bleaching agent used: 10% carbamide peroxide only; a blend of 10% carbamide peroxide and a CPP-ACP paste; 16% carbamide peroxide only; and a blend of 16% carbamide peroxide and a CPP-ACP paste. During the 14-day bleaching regimen, the samples were stored in artificial saliva. The Vickers microhardness and color of the teeth were assessed at baseline (T0) and immediately after the bleaching regimen (T14) using a microhardness tester and a spectrophotometer, respectively. The degree of color change was determined by the Commission Internationale de l'Eclariage (CIE) L*a*b* system (ΔE, ΔL*, Δa*, and Δb*) and Vita shade guide parameters. The data were analyzed by analysis of variance and the Tukey test (pmicrohardness values at T14 compared with T0, whereas the samples that were bleached with peroxide only did not show any differences in their microhardness values. All of the bleaching agents were effective at whitening the teeth and did not show a statistically significant difference using the CIEL*a*b* system (ΔE, ΔL*, Δa*, and Δb*) or the Vita shade guide parameters. The use of a CPP-ACP paste with carbamide peroxide bleaching agents increased the bleached enamel's microhardness and did not have an influence on whitening efficacy.

  18. Changes in coral-associated microbial communities during a bleaching event.

    Science.gov (United States)

    Bourne, David; Iida, Yuki; Uthicke, Sven; Smith-Keune, Carolyn

    2008-04-01

    Environmental stressors such as increased sea surface temperatures are well-known for contributing to coral bleaching; however, the effect of increased temperatures and subsequent bleaching on coral-associated microbial communities is poorly understood. Colonies of the hard coral Acropora millepora were tagged on a reef flat off Magnetic Island (Great Barrier Reef) and surveyed over 2.5 years, which included a severe bleaching event in January/February 2002. Daily average water temperatures exceeded the previous 10-year average by more than 1 degrees C for extended periods with field-based visual surveys recording all tagged colonies displaying signs of bleaching. During the bleaching period, direct counts of coral zooxanthellae densities decreased by approximately 64%, before recovery to pre-bleaching levels after the thermal stress event. A subset of three tagged coral colonies were sampled through the bleaching event and changes in the microbial community elucidated. Denaturing gradient gel electrophoresis (DGGE) analysis demonstrated conserved bacterial banding profiles between the three coral colonies, confirming previous studies highlighting specific microbial associations. As coral colonies bleached, the microbial community shifted and redundancy analysis (RDA) of DGGE banding patterns revealed a correlation of increasing temperature with the appearance of Vibrio-affiliated sequences. Interestingly, this shift to a Vibrio-dominated community commenced prior to visual signs of bleaching. Clone libraries hybridized with Vibrio-specific oligonucleotide probes confirmed an increase in the fraction of Vibrio-affiliated clones during the bleaching period. Post bleaching, the coral microbial associations again shifted, returning to a profile similar to the fingerprints prior to bleaching. This provided further evidence for corals selecting and shaping their microbial partners. For non-bleached samples, a close association with Spongiobacter-related sequences were

  19. Contrasting patterns of coral bleaching susceptibility in 2010 suggest an adaptive response to thermal stress.

    Directory of Open Access Journals (Sweden)

    James R Guest

    Full Text Available BACKGROUND: Coral bleaching events vary in severity, however, to date, the hierarchy of susceptibility to bleaching among coral taxa has been consistent over a broad geographic range and among bleaching episodes. Here we examine the extent of spatial and temporal variation in thermal tolerance among scleractinian coral taxa and between locations during the 2010 thermally induced, large-scale bleaching event in South East Asia. METHODOLOGY/PRINCIPAL FINDINGS: Surveys to estimate the bleaching and mortality indices of coral genera were carried out at three locations with contrasting thermal and bleaching histories. Despite the magnitude of thermal stress being similar among locations in 2010, there was a remarkable contrast in the patterns of bleaching susceptibility. Comparisons of bleaching susceptibility within coral taxa and among locations revealed no significant differences between locations with similar thermal histories, but significant differences between locations with contrasting thermal histories (Friedman = 34.97; p<0.001. Bleaching was much less severe at locations that bleached during 1998, that had greater historical temperature variability and lower rates of warming. Remarkably, Acropora and Pocillopora, taxa that are typically highly susceptible, although among the most susceptible in Pulau Weh (Sumatra, Indonesia where respectively, 94% and 87% of colonies died, were among the least susceptible in Singapore, where only 5% and 12% of colonies died. CONCLUSIONS/SIGNIFICANCE: The pattern of susceptibility among coral genera documented here is unprecedented. A parsimonious explanation for these results is that coral populations that bleached during the last major warming event in 1998 have adapted and/or acclimatised to thermal stress. These data also lend support to the hypothesis that corals in regions subject to more variable temperature regimes are more resistant to thermal stress than those in less variable environments.

  20. Effect of pH values of two bleaching gels on enamel microhardness.

    Science.gov (United States)

    Araujo, Natalia Costa; da Costa Soares, Manuella Uilmann Silva; Nery, Marcela Maria; Sales, Wagno Silva; Gerbi, Marleny Elizabeth Martinez

    2013-07-01

    This study evaluated the influence of bleaching gel pH and the effect of remineralizing gels after bleaching in different time intervals. Sixty bovine incisors were divided into 2 groups (n = 30). Group 1 was bleached with a 35% hydrogen peroxide (HP) acid gel and Group 2 was bleached with a 35% HP neutral gel. Each group was then divided into 3 subgroups (n = 10) according to the post-bleaching treatment used: storage in artificial saliva, application of a fluoride gel, or application of a gel consisting of fluoride, potassium nitrate, and nanostructured calcium phosphate. Specimens were stored in artificial saliva, and enamel microhardness was evaluated at 24 hours and 15 days postbleaching. Vickers microhardness data were analyzed by means of 2-way ANOVA, with repeated measurements and Bonferroni's post-hoc test. Twenty-four hours after bleaching, no significant differences were found between the bleaching gels. At 15 days postbleaching, Group 2 samples demonstrated a significant reduction in microhardness. No significant differences were found between the remineralizing gels, though all of the postbleaching treatments after the use of 35% neutral gel were able to re-establish baseline microhardness. It was concluded that neutral bleaching gel significantly reduced enamel microhardness 15 days after bleaching and that the use of remineralizing gels did not significantly enhance the microhardness of bleached enamel. However, in clinical situations, the acquired enamel pellicle protects tooth surfaces, and postbleaching, decalcified enamel would undergo recalcification. This study indicates that it is important to consider the bleaching agent's pH and composition when treating patients with reduced salivary secretion.

  1. Effects of green tea on the shear bond strength of orthodontic brackets after in-office vital bleaching.

    Science.gov (United States)

    Berger, Sandrine Bittencourt; Guiraldo, Ricardo Danil; Lopes, Murilo Baena; Oltramari-Navarro, Paula Vanessa; Fernandes, Thais Maria; Schwertner, Renata de Castro Alves; Ursi, Wagner José Silva

    2016-01-01

    The application of bleaching agents before placement of resin-bonded fixed appliances significantly, but temporarily, reduces bond strength to tooth structure. Antioxidants have been studied as a means to remove residual oxygen that compromises bonding to bleached enamel. This in vitro study evaluated whether green tea (GT) could restore the shear bond strength between bonded orthodontic brackets and bleached enamel. Six experimental groups were compared: group 1, no bleaching plus bracket bonding (positive control); group 2, bleaching with 35% hydrogen peroxide (HP) plus bracket bonding (negative control); group 3, 35% HP plus 10% sodium ascorbate (SA) plus bracket bonding; group 4, 35% HP plus 10% GT plus bracket bonding; group 5, no bleaching plus 10% SA plus bracket bonding; group 6, no bleaching plus 10% GT plus bracket bonding. Results suggested that GT, like SA, may be beneficial for bracket bonding immediately after bleaching.

  2. Detection of Chlorophenolic Compounds in Bleaching Effluents of Chemical Pulps

    Institute of Scientific and Technical Information of China (English)

    Chhaya Sharma; S.Mohanty; S.Kumar; N.J.Rao; li qian

    2008-01-01

    Laboratory bleaching effluents from the chlorination and caustic extraction stages of mixed wood kraft pulp processing have been analysed both qualitatively and quantitatively for various chlorophenolics by using GC.A number of chlorinated derivaties of phenols,catechols,guaiacols and syringaldehydes have been detected and their concentrations are estimated.The results are compared with that of different agriculture residue / hardwood pulps,which were reported in literature.The concentrations of various compounds detected have also been compared with their reported 96LC50 values.

  3. Effectiveness of nano-calcium phosphate paste on sensitivity during and after bleaching: a randomized clinical trial

    OpenAIRE

    LOGUERCIO, Alessandro Dourado; Lidia Yileng TAY; HERRERA,Daniel Rodrigo; Bauer,Jose; Reis, Alessandra

    2015-01-01

    The study aimed to evaluate the effectiveness of in-office bleaching and associated tooth sensitivity on application of nano-calcium phosphate paste as desensitizing agent. Bleaching was performed with 35% hydrogen peroxide gel in 40 patients who were randomly divided into placebo and nano-calcium phosphate paste groups. Bleaching efficacy (BE) was evaluated using a value-oriented Vita shade guide. Tooth sensitivity was recorded using a numeric rating scale (0–4) during bleaching and up...

  4. In Situ and In Vitro Effects of Two Bleaching Treatments on Human Enamel Hardness.

    Science.gov (United States)

    Henn-Donassollo, Sandrina; Fabris, Cristiane; Gagiolla, Morgana; Kerber, Ícaro; Caetano, Vinícius; Carboni, Vitor; Salas, Mabel Miluska Suca; Donassollo, Tiago Aurélio; Demarco, Flávio Fernando

    2016-01-01

    The aim of this study was to evaluate in vitro and in situ the effects of two bleaching treatments on human enamel surface microhardness. Sixty enamel slabs from recently extracted thirty molars were used. The specimens were polished with sandpapers under water-cooling. The enamel samples were randomly divided in four groups, treated with 10% hydrogen peroxide (HP) or Whitening Strips (WS) containing 10% hydrogen peroxide and using two conditions: in vitro or in situ model. For in situ condition, six volunteers wore an intra-oral appliance containing enamel slabs, while for in vitro condition the specimens were kept in deionized water after the bleaching protocols. The bleaching treatments were applied one-hour daily for 14 days. Similar amounts of bleaching agents were used in both conditions. Before and after bleaching treatments, microhardness was measured. Statistical analysis (ANOVA and Tukey test) showed that in the in situ condition there was no statistically significant microhardness reduction in the bleached enamel (p>0.05). Significant decrease in hardness was observed for enamel slabs bleached with both treatments in the in vitro condition (phardness value. It could be concluded that there was no deleterious effect on enamel produced by any of the bleaching protocols used in the in situ model. The reduction of hardness was only observed in vitro.

  5. WOOD BASIC DENSITY EFFECT OF Eucalyptus grandis x Eucalyptus urophylla CLONES ON BLEACHED PULP QUALITY

    Directory of Open Access Journals (Sweden)

    Sheila Rodrigues dos Santos

    2010-08-01

    Full Text Available The study analyzed the wood basic density effect in two Eucalyptus grandis x Eucalyptus urophylla hybrid clones (440 kg/m3 e 508 kg/m3 on bleached pulp quality (fiber dimensions and physical-mechanical properties. The woods performance on pulping, bleaching and beating results were analyzed. The Kraft pulping was carried out in forced circulation digester in order to obtain 17±1 kappa number targets. The pulps were bleached to 90±1 using delignification oxygen and D0EOPD1 bleaching sequence. Bleached pulp of low basic density clone showed, significantly, lowest revolutions number in the PFI mill to reach tensile index of 70 N.m/g, low Schopper Riegler degree and generated sheets with higher values to bulk and opacity. These characteristics and properties allow concluding that bleached pulp of low basic density clone was the most indicated to produce printing and writing sheets. The bleached pulp of high basic density clone showed higher values of bulk and capillarity Klemm and lower water retention value when analyzed without beating. The bleached pulp of high basic density clone showed more favorable characteristics to the production of tissue papers.

  6. Re-evaluating luminescence burial doses and bleaching of fluvial deposits using Bayesian computational statistics

    NARCIS (Netherlands)

    Cunningham, A. C.; Wallinga, J.; Hobo, N.; Versendaal, A. J.; Makaske, B.; Middelkoop, H.

    2015-01-01

    The optically stimulated luminescence (OSL) signal from fluvial sediment often contains a remnant from the previous deposition cycle, leading to a partially bleached equivalent-dose distribution. Although identification of the burial dose is of primary concern, the degree of bleaching could potentia

  7. Re-evaluating luminescence burial doses and bleaching of fluvial deposits using Bayesian computational statistics.

    NARCIS (Netherlands)

    Cunningham, A.C.; Wallinga, J.; Versendaal, Alice; Makaske, A.; Middelkoop, H.; Hobo, N.

    2015-01-01

    The optically stimulated luminescence (OSL) signal from fluvial sediment often contains a remnant from the previous deposition cycle, leading to a partially bleached equivalent-dose distribution. Although identification of the burial dose is of primary concern, the degree of bleaching could potentia

  8. Comparing Environmental Influences on Coral Bleaching Across and within Species using Clustered Binomial Regression

    Science.gov (United States)

    Differential susceptibility among reef-building coral species can lead to community shifts and loss of diversity as a result of temperature-induced mass bleaching events. However, the influence of the local environment on species-specific bleaching susceptibilities has not been ...

  9. Outbreak and persistence of opportunistic symbiotic dinoflagellates during the 2005 Caribbean mass coral 'bleaching' event.

    Science.gov (United States)

    LaJeunesse, Todd C; Smith, Robin T; Finney, Jennifer; Oxenford, Hazel

    2009-12-07

    Reef corals are sentinels for the adverse effects of rapid global warming on the planet's ecosystems. Warming sea surface temperatures have led to frequent episodes of bleaching and mortality among corals that depend on endosymbiotic micro-algae (Symbiodinium) for their survival. However, our understanding of the ecological and evolutionary response of corals to episodes of thermal stress remains inadequate. For the first time, we describe how the symbioses of major reef-building species in the Caribbean respond to severe thermal stress before, during and after a severe bleaching event. Evidence suggests that background populations of Symbiodinium trenchi (D1a) increased in prevalence and abundance, especially among corals that exhibited high sensitivity to stress. Contrary to previous hypotheses, which posit that a change in symbiont occurs subsequent to bleaching, S. trenchi increased in the weeks leading up to and during the bleaching episode and disproportionately dominated colonies that did not bleach. During the bleaching event, approximately 20 per cent of colonies surveyed harboured this symbiont at high densities (calculated at less than 1.0% only months before bleaching began). However, competitive displacement by homologous symbionts significantly reduced S. trenchi's prevalence and dominance among colonies after a 2-year period following the bleaching event. While the extended duration of thermal stress in 2005 provided an ecological opportunity for a rare host-generalist symbiont, it remains unclear to what extent the rise and fall of S. trenchi was of ecological benefit or whether its increased prevalence was an indicator of weakening coral health.

  10. INDICATORS OF UV EXPOSURE IN CORALS AND THEIR RELEVANCE TO GLOBAL CLIMATE CHANGE AND CORAL BLEACHING

    Science.gov (United States)

    A compelling aspect of the deterioration of coral reefs is the phenomenon of coral bleaching. Through interactions with other factors such as sedimentation, pollution, and bacterial infection, bleaching can impact large areas of a reef with limited recovery, and it might be induc...

  11. In vitro colorimetric evaluation of the efficacy of various bleaching methods and products

    OpenAIRE

    Dietschi, Didier; Rossier, Sandrine; Krejci, Ivo

    2006-01-01

    Various bleaching modalities are now offered to patients, either monitored by the dental office or self-directed, for which relative efficacy is unknown. The aim of this in vitro study was to evaluate the ability of different bleaching products and protocols to lighten enamel and dentin.

  12. Coral reef bleaching and sea surface temperature anomalies: 1991-1996 global patterns

    Energy Technology Data Exchange (ETDEWEB)

    Goreau, T.J.; Hayes, R.L.; Strong, A.

    1997-12-31

    Global spatio-temporal patterns of mass coral reef bleaching during the first half of the 1990s continued to show the strong temperature correlations which first became established in the 1980s. Satellite sea surface temperature data and field observations were used to track thermal bleaching events in real time. Most bleaching events followed warm season sea surface temperature anomalies of around +1 degree celsius above historical means. Global bleaching patterns appear to have been strongly affected by worldwide cooling which followed eruption of Mount Pinatubo in June 1991. High water temperatures and mass coral reef bleaching took place in the Caribbean, Indian Ocean, and South Pacific in 1991, but there were few thermal anomalies or bleaching events in 1992 and 1993, years which were markedly cooler worldwide. Following the settling of Mount Pinatubo aerosols and resumption of global warming trends, extensive ocean thermal hot spots and bleaching events resumed in the South Pacific, South Atlantic, and Indian Oceans in 1994. Bleaching again took place in hot spots in the Indian Ocean and Caribbean in 1995, and in the South Atlantic, Caribbean, South Pacific, North Pacific, and Persian Gulf in 1996. Coral reefs worldwide are now very close to their upper temperature tolerance limits. This sensitivity, and the fact that the warmest ecosystems have no source of immigrant species pre-adapted to warmer conditions, may make coral reef ecosystems the first to be severely impacted if global temperatures and sea levels remain at current values or increase further.

  13. MODIFIED OPAL:A NOVEL STABILIZER FOR HYDROGEN PEROXIDE BLEACHING OF PULPS

    Institute of Scientific and Technical Information of China (English)

    Xueren Qian; Xianhui An; Wenbo Liu; Gang Yu; Zhanqian Song

    2004-01-01

    The possibility of modified opal as the stabilizer of hydrogen peroxide bleaching was investigated. The results showed that the modified opal in place of sodium silicate as the stabilizer of hydrogen peroxide bleaching is feasible. At the same dosage, above 3% ISO can be increased for both wheat straw pulp and deinked pulp. The stabilizing ability of the modified opal to hydrogen peroxide bleaching of pulp is improved markedly. It is favorable for bleaching to increase temperature and time within a permissive extent. The suitable process conditions are 10% of pulp consistency, 3% of hydrogen peroxide, 1.5% of sodium hydroxide, 3% of the modified opal, 70℃ and 60 min when the modified opal is used as the stabilizer of hydrogen peroxide bleaching. At these conditions, the brightness gain can reach about 16% ISO for wheat straw pulp. In addition, it is favorable for bleaching to add a little magnesium sulfate when the modified opal is used as the stabilizer of hydrogen peroxide bleaching, the brightness of pulp can increase I%ISO if0.05% of magnesium sulfate is added. The cost analysis indicated that the modified opal is superior to sodium silicate as the stabilizer of hydrogen peroxide bleaching in economical aspect and has further the potential of market development.

  14. Post-bleaching application of an antioxidant on dentin bond strength of three dental adhesives

    Directory of Open Access Journals (Sweden)

    Maryam Khoroushi

    2012-01-01

    Conclusions: The findings suggest that bond strength of resin to bleached dentin may be affected with the adhesive system. Reduced SBS to bleached dentin can be amended by the use of SA as an antioxidizing agent. However, the amount of reversed bond strength subsequent to applying antioxidant might be related to the kind of dental adhesive.

  15. Effect of bleaching on the shear bond strength of the enamel

    Directory of Open Access Journals (Sweden)

    Thiago Arruda

    2008-01-01

    Full Text Available Objective: To evaluate the effect of dental bleaching on the shear bond strength of enamel. Methods: Fifty molars were selected and divided into five groups (n=10; G1-without bleaching (control; G2-bleached with 10% carbamide peroxide and restored 24h later; G3-bleached with 10% carbamide peroxide and restored seven days later; G4-bleached with 35% hydrogen peroxide and restored a 35% and restored 24h later; G5-bleached with 35% hydrogen peroxide and restored a 35% and restored seven days later. During the 24h and 7-day intervals the test specimens remained stored in artificial saliva, after which the restorative procedures were performed on the enamel. Results: The microshear bond strength test indicated the following results in MPa (ANOVA and Tukey post-hoc: G1-43.15 a (±5.19; G2-31.34 ab (± 4.41; G3-36.66 ab (± 3.11; G4-22.87 c (±3.76 and G5-35.67 ab (± 4.64. Conclusion: Groups G1, G2, G3 and G5 showed no statistical difference and Group G4 (bleached with 35% hydrogen peroxide and restored 24h later showed diminished bond strength between the bleached enamel and resin composite.

  16. Influence of photo- and thermal bleaching on pre-irradiation low water peak single mode fibers

    Science.gov (United States)

    Yin, Jianchong; Wen, Jianxiang; Luo, Wenyun; Xiao, Zhongyin; Chen, Zhenyi; Wang, Tingyun

    2011-12-01

    Reducing the radiation-induced transmission loss in low water peak single mode fiber (LWP SMF) has been investigated by using photo-bleaching method with 980nm pump light source and using thermal-bleaching method with temperature control system. The results show that the radiation-induced loss of pre-irradiation optical fiber can be reduced effectively with the help of photo-bleaching or thermal-bleaching. Although the effort of photo-bleaching is not as significant as thermal-bleaching, by using photo-bleaching method, the loss of fiber caused by radiation-induced defects can be reduced best up to 49% at 1310nm and 28% at 1550nm in low pre-irradiation condition, the coating of the fiber are not destroyed, and the rehabilitating time is just several hours, while self-annealing usually costs months' time. What's more, the typical high power LASER for photo-bleaching can be 980nm pump Laser Diode, which is very accessible.

  17. Bleaching augments lipid peroxidation products in pistachio oil and its cytotoxicity

    Science.gov (United States)

    Pistachio consumption is associated with reductions in serum cholesterol and oxidative stress due to their constituents of unsaturated fats, phytosterols, fiber, and antioxidants. Bleaching has been applied to whiten nut shells for antifungal and cosmetic purposes. However, the impact of bleaching o...

  18. The effect of enamel bleaching on the shear bond strengths of metal and ceramic brackets.

    Science.gov (United States)

    Oztaş, E; Bağdelen, G; Kiliçoğlu, H; Ulukapi, H; Aydin, I

    2012-04-01

    The aim of this study was to evaluate the effects of bleaching and delayed bonding on the shear bond strengths of metal and ceramic brackets bonded with light and chemically cure composite resin to human enamel. One hundred and twenty extracted human premolar teeth were randomly divided into three groups of 40 each. The first two groups were bleached with 20 per cent carbamide peroxide (CP) at-home bleaching agent. No bleaching procedures were applied to the third group and served as control. The first two and control groups were divided into equal subgroups according to different adhesive-bracket combinations. Specimens in group 1 (n = 40) were bonded 24 hours after bleaching process was completed while the specimens in group 2 (n = 40) were bonded 14 days after. The specimens in all groups were debonded with a Universal testing machine while the modified adhesive remnant index was used to evaluate fracture properties. No statistically significant differences were found between the shear bond strengths of metal and ceramic brackets bonded to bleached enamel after 24 hours, 14 days, and unbleached enamel with light or chemical cure adhesives (P > 0.05). The mode of failure was mostly at the bracket/adhesive interface and cohesive failures within the resin were also observed. Our findings indicated that at-home bleaching agents that contain 20 per cent CP did not significantly affect the shear bond strength of metal and ceramic orthodontic brackets to enamel when bonding is performed 24 hours or 14 days after bleaching.

  19. Microbial community compositional shifts in bleached colonies of the Brazilian reef-building coral Siderastrea stellata.

    Science.gov (United States)

    Lins-de-Barros, Monica M; Cardoso, Alexander M; Silveira, Cynthia B; Lima, Joyce L; Clementino, Maysa M; Martins, Orlando B; Albano, Rodolpho M; Vieira, Ricardo P

    2013-01-01

    The association of metazoan, protist, and microbial communities with Scleractinian corals forms the basis of the coral holobiont. Coral bleaching events have been occurring around the world, introducing changes in the delicate balance of the holobiont symbiotic interactions. In this study, Archaea, bacteria, and eukaryotic phototrophic plastids of bleached colonies of the Brazilian coral Siderastrea stellata were analyzed for the first time, using 16S rRNA gene libraries. Prokaryotic communities were slightly more diverse in healthy than in bleached corals. However, the eukaryotic phototrophic plastids community was more diverse in bleached corals. Archaea phylogenetic analyses revealed a high percentage of Crenarchaeota sequences, mainly related to Nitrosopumilus maritimus and Cenarchaeum symbiosum. Dramatic changes in bacterial community composition were observed in this bleaching episode. The dominant bacterial group was Alphaproteobacteria followed by Gammaproteobacteria in bleached and Betaproteobacteria in healthy samples. Plastid operational taxonomic units (OTUs) from both coral samples were mainly related to red algae chloroplasts (Florideophycea), but we also observed some OTUs related to green algae chloroplasts (Chlorophyta). There seems to be a strong relationship between the Bacillariophyta phylum and our bleached coral samples as clones related to members of the diatom genera Amphora and Nitzschia were detected. The present study reveals information from a poorly investigated coral species and improves the knowledge of coral microbial community shifts that could occur during bleaching episodes.

  20. Effect of light activation on tooth sensitivity after in-office bleaching.

    Science.gov (United States)

    Kossatz, S; Dalanhol, A P; Cunha, T; Loguercio, A; Reis, A

    2011-01-01

    This clinical study evaluated the effects of light-emitting diode (LED)/laser activation on bleaching effectiveness (BE) and tooth sensitivity (TS) during in-office bleaching. Thirty caries-free patients were divided into two groups: light-activated (LA) and non-activated (NA) groups. A 35% hydrogen peroxide gel (Whiteness HP Maxx, FGM Dental Products, Joinville SC, Brazil) was used in three 15-minute applications for both groups. For the LA group, LED/laser energy (Whitening Lase Light Plus, DMC Odontológica, São Carlos SP, Brazil) was used, in accordance with the manufacturer's directions. Two sessions of bleaching were performed at one-week intervals. Color was registered at baseline and after the first and second bleaching sessions using a Vita shade guide. Patients recorded TS on a 0 to 4 scale during bleaching and within the next 24 and 48 hours of each session. BE at recall each week and intensity of TS were evaluated by repeated measures analysis of variance (ANOVA) and Tukey tests (α=0.05). Tooth sensitivity was compared using the Friedman repeated measures analysis of variance by rank and the Wilcoxon sign-ranked test. Faster bleaching was observed for the LA group than for the NA group after the first session (4.8 and 3.8 shade guide units [SGUs]; p=0.0001). However, both techniques were capable of bleaching the same number of SGUs after the second bleaching session (p=0.52). Most of the LA group (53.3%) had sensitivity even 24 hours after each bleaching session, but only 26.6% from the NA group reported TS. The intensity of TS was similar for both groups immediately after bleaching but significantly higher for the LA group 24 hours after each bleaching session (p=0.001). After two bleaching sessions, the use of LED/laser light activation did not improve bleaching speed. Persistent tooth sensitivity and higher tooth sensitivity after 24 hours of bleaching were observed when light activation was used.

  1. Comparison of the bleaching efficacy of three different agents used for intracoronal bleaching of discolored primary teeth: An in vitro study

    Directory of Open Access Journals (Sweden)

    R Ganesh

    2013-01-01

    Full Text Available Everyone wants whiter teeth to make them feel younger and to provide beautiful smiles with the accompanying increase in self-esteem. Bleaching is an established, simple, cost-effective and conservative method for improving the color of the discolored teeth. Aim: The aim of this in vitro study was to compare the bleaching efficacy of 10% carbamide peroxide, 10% hydrogen peroxide and 2g sodium perborate as bleaching agents on the artificially discolored human primary maxillary central incisors. Materials and Methods: Forty extracted human primary central incisors with intact crowns were selected for the study. Pulpectomy was performed and each tooth was artificially stained with 2 ml of fresh human blood and centrifuged. --The teeth were randomly divided into four experimental groups of 10 teeth each and the baseline color evaluation was performed. 0.04 ml of the bleaching agent is syringed into the access cavity of the tooth and, in the control group, 0.04 ml of distilled water was syringed into the access cavity and it was sealed with IRM and placed at 37°C in an incubator throughout the experiment. The color of the bleached teeth was determined at 0, 7 and 14 days. The data obtained were analyzed using ANOVA and Turkey′s test. Results: There was statistical significance (P = 0.00 among the carbamide peroxide, sodium perborate, hydrogen peroxide and control groups after 7 and 14 days and a significance of P = 0.013 among the carbamide peroxide, sodium perborate and hydrogen peroxide after two bleaching sessions (day 14 was seen. Conclusions: The bleaching efficacy of 10% hydrogen peroxide gel was more effective than 10% carbamide peroxide and sodium perborate in bleaching the artificially discolored primary teeth.

  2. ENZYMATIC BLEACHING OF WHEAT STRAW SODA-AQ PULP BY LMS TREATMENT

    Institute of Scientific and Technical Information of China (English)

    Xiwen Wang; Huaiyu Zhan; Lili Xu

    2004-01-01

    Laccase has been proven that it has a good selectivity and efficiency in pulp bleaching. In this paper, the effects of LMS (Laccase Mediator System) treatment on delignification and bleaching of wheat straw pulp at various conditions, such as laccase dosage,temperature, oxygen pressure and pH, were investigated. The TCF sequence including LMS can bleach the wheat straw pulp to 81% ISO brightness with good strength. The synergetic biobleaching of LMS and xylanase of wheat straw pulp was also investigated. It was found that the final brightness and strength of synergetic biobleaching pulps increased to a certain extent and the bleaching selectivity was improved. The combination of the enzymes is feasible for the delignification and bleaching.

  3. ENZYMATIC BLEACHING OF WHEAT STRAW SODA--AQ PULP BY LMS TREATMENT

    Institute of Scientific and Technical Information of China (English)

    XiwenWang; HuaiyuZhan; LiliXu

    2004-01-01

    Laccase has been proven that it has a good selectivity and efficiency in pulp bleaching. In this paper, the effects of LMS (Laccase Mediator System) treatment on delignification and bleaching of wheat straw pulp at various conditions, such as laccase dosage, temperature, oxygen pressure and pH, were investigated. The TCF sequence including LMS can bleach the wheat straw pulp to 81% ISO brightness with good strength. The synergetic biobleaching of LMS and xylanase of wheat straw pulp was also investigated. It was found that the final brightness and strength of synergetic biobleaching pulps increased to a certain extent and the bleaching selectivity was improved. The combination of the enzymes is feasible for the delignification and bleaching.

  4. The combination of sodium perborate and water as intracoronal teeth bleaching agent

    Directory of Open Access Journals (Sweden)

    Ananta Tantri Budi

    2008-12-01

    Full Text Available Background: The color change on post-endodontic treated teeth can be overcome by intracoronal tooth bleaching using walking bleach. Some agents used in walking bleach are combination of sodium peroxide and hydrogen peroxide, and combination of sodium perborate and water. Purpose: The objective of this review is to provide information and consideration of using safe and effective bleaching agents in the field of dentistry. Reviews: On one side, the use of sodium perborate and water combination does not cause the reduction of dentin hardness, enamel decay, and root resorbtion. On the other side, the use of sodium perborate and 30% hydrogen peroxide combination indicates that it takes longer time in yielding the proper color of teeth. Conclusion: The use of sodium perborate and water combination as bleaching agents is effective and safe.

  5. Seasonal Dynamical Prediction of Coral Bleaching in the Great Barrier Reef, Australia

    Science.gov (United States)

    Spillman, C. M.; Alves, O.

    2009-05-01

    Sea surface temperature (SST) is now recognised as the primary cause of mass coral bleaching events. Coral bleaching occurs during times of stress, particularly when SSTs exceed the coral colony's tolerance level. Global warming is potentially a serious threat to the future of the world's reef systems with predictions by the international community that bleaching will increase in both frequency and severity. Advance warning of anomalous sea surface temperatures, and thus potential bleaching events, would allow for the implementation of management strategies to minimise reef damage. Seasonal SST forecasts from the coupled ocean-atmosphere model POAMA (Bureau of Meteorology) have skill in the Great Barrier Reef (Australia) several months into the future. We will present model forecasts and probabilistic products for use in reef management, and assess model skill in the region. These products will revolutionise the way in which coral bleaching events are monitored and assessed in the Great Barrier Reef and Australian region.

  6. Enamel susceptibility to red wine staining after 35% hydrogen peroxide bleaching

    Directory of Open Access Journals (Sweden)

    Sandrine Bittencourt Berger

    2008-06-01

    Full Text Available Concern has been expressed regarding the staining of enamel surface by different beverages after bleaching. This study investigated the influence of 35% hydrogen peroxide bleaching agents on enamel surface stained with wine after whitening treatments. Flat and polished bovine enamel surfaces were submitted to two commercially available 35% hydrogen peroxide bleaching agents or kept in 100% humidity, as a control group (n = 10. Specimens of all groups were immersed in red wine for 48 h at 37°C, immediately, 24 h or 1 week after treatments. All specimens were ground into powder and prepared for the spectrophotometric analysis. Data were subjected to two-way analysis of variance and Fisher's PLSD test at 5% significance level. The amount of wine pigments uptake by enamel submitted to bleaching treatments was statistically higher than that of control group, independently of the evaluation time. Results suggested that wine staining susceptibility was increased by bleaching treatments.

  7. CHLORINE DIOXIDE BLEACHING OF SODA-ANTHRAQUINONE JUTE PULP TO A VERY HIGH BRIGHTNESS

    Directory of Open Access Journals (Sweden)

    M. Sarwar Jahan

    2010-05-01

    Full Text Available Bleaching of soda-anthraquinone jute pulp by chlorine dioxide (ClO2 was studied to reach a target brightness of above 88% for the purpose of using less bleaching chemicals. The performance of either chlorine dioxide or peroxide in the final bleaching to boost brightness was also studied. The experimental results revealed that the final brightness depended on ClO2 charge in the Do and D1 stages. The brightness reversion was lower when the final stage brightening was done by peroxide. The use of Mg(OH2 in the D1 and D2 stages improved the final brightness due to the formation of less chlorate and chlorite during the Mg(OH2- based ClO2 brightening stages. The strength properties of pulp bleached by peroxide in the final stage was slightly better than that from ClO2 as the final ClO2 bleaching stage.

  8. Climate change disables coral bleaching protection on the Great Barrier Reef.

    Science.gov (United States)

    Ainsworth, Tracy D; Heron, Scott F; Ortiz, Juan Carlos; Mumby, Peter J; Grech, Alana; Ogawa, Daisie; Eakin, C Mark; Leggat, William

    2016-04-15

    Coral bleaching events threaten the sustainability of the Great Barrier Reef (GBR). Here we show that bleaching events of the past three decades have been mitigated by induced thermal tolerance of reef-building corals, and this protective mechanism is likely to be lost under near-future climate change scenarios. We show that 75% of past thermal stress events have been characterized by a temperature trajectory that subjects corals to a protective, sub-bleaching stress, before reaching temperatures that cause bleaching. Such conditions confer thermal tolerance, decreasing coral cell mortality and symbiont loss during bleaching by over 50%. We find that near-future increases in local temperature of as little as 0.5°C result in this protective mechanism being lost, which may increase the rate of degradation of the GBR.

  9. Recognizing a limitation of the TBLC-activated peroxide system on low-temperature cotton bleaching.

    Science.gov (United States)

    Chen, Wenhua; Wang, Lun; Wang, Dong; Zhang, Jingjing; Sun, Chang; Xu, Changhai

    2016-04-20

    In this study, cotton was bleached at low temperatures with an activated peroxide system which was established by incorporating a bleach activator, namely, N-[4-(triethylammoniomethyl)benzoyl]caprolactam chloride (TBCC) into an aqueous solution of hydrogen peroxide (H2O2). Experimental results showed that the bleaching performance was unexpectedly diminished as the TBCC concentration was increased over the range of 25-100g/L. Kinetic adsorption experiment indicated that this was most likely ascribed to the adsorptive interactions of TBCC and the in situ-generated compounds with cotton fibers. Such a limitation was especially fatal to cold pad-batch bleaching process of cotton in which a high TBCC concentration was often required. The results of this study may stimulate further research to avoid or overcome the limitation of the TBCC-activated peroxide system on low-temperature cotton bleaching.

  10. Influence of Bleaching on Flavor of 34% Whey Protein Concentrate and Residual Benzoic Acid Concentration in Dried Whey Proteins

    Science.gov (United States)

    Previous studies have shown that bleaching negatively affects the flavor of 70% whey protein concentrate (WPC70), but bleaching effects on lower-protein products have not been established. Benzoyl peroxide (BP), a whey bleaching agent, degrades to benzoic acid (BA) and may elevate BA concentrations...

  11. Influence of bleaching on flavor of 34% whey protein concentrate and residual benzoic acid concentration in dried whey products

    Science.gov (United States)

    Previous studies have shown that bleaching negatively affects the flavor of 70% whey protein concentrate (WPC70), but bleaching effects on lower-protein products have not been established. Benzoyl peroxide (BP), a whey bleaching agent, degrades to benzoic acid (BA) and may elevate BA concentrations...

  12. Bleaching of leaf litter and associated microfungi in subboreal and subalpine forests.

    Science.gov (United States)

    Hagiwara, Yusuke; Matsuoka, Shunsuke; Hobara, Satoru; Mori, Akira S; Hirose, Dai; Osono, Takashi

    2015-10-01

    Fungal decomposition of lignin leads to the whitening, or bleaching, of leaf litter, especially in temperate and tropical forests, but less is known about such bleaching in forests of cooler regions, such as boreal and subalpine forests. The purposes of the present study were to examine the extent of bleached area on the surface of leaf litter and its variation with environmental conditions in subboreal and subalpine forests in Japan and to examine the microfungi associated with the bleaching of leaf litter by isolating fungi from the bleached portions of the litter. Bleached area accounted for 21.7%-32.7% and 2.0%-10.0% of total leaf area of Quercus crispula and Betula ermanii, respectively, in subboreal forests, and for 6.3% and 18.6% of total leaf area of B. ermanii and Picea jezoensis var. hondoensis, respectively, in a subalpine forest. In subboreal forests, elevation, C/N ratio and pH of the FH layer, and slope aspect were selected as predictor variables for the bleached leaf area. Leaf mass per area and lignin content were consistently lower in the bleached area than in the nonbleached area of the same leaves, indicating that the selective decomposition of acid unhydrolyzable residue (recalcitrant compounds such as lignin, tannins, and cutins) enhanced the mass loss of leaf tissues in the bleached portions. Isolates of a total of 11 fungal species (6 species of Ascomycota and 5 of Basidiomycota) exhibited leaf-litter-bleaching activity under pure culture conditions. Two fungal species (Coccomyces sp. and Mycena sp.) occurred in both subboreal and subalpine forests, which were separated from each other by approximately 1100 km.

  13. Massive bleaching of coral reefs induced by the 2010 ENSO, Puerto Cabello, Venezuela.

    Science.gov (United States)

    del Mónaco, Carlos; Haiek, Gerard; Narciso, Samuel; Galindo, Miguel

    2012-06-01

    El Niño Southern Oscillation (ENSO) has generated global coral massive bleaching. The aim of this work was to evaluate the massive bleaching of coral reefs in Puerto Cabello, Venezuela derived from ENSO 2010. We evaluated the bleaching of reefs at five localities both at three and five meter depth. The coral cover and densities of colonies were estimated. We recorded living coral cover, number and diameter of bleached and non-bleached colonies of each coral species. The colonies were classified according to the proportion of bleached area. Satellite images (Modis Scar) were analyzed for chlorophyll-a concentration and temperature in August, September, October and November from 2008-2010. Precipitation, wind speed and air temperature information was evaluated in meteorological data for 2009 and 2010. A total of 58.3% of colonies, belonging to 11 hexacoral species, were affected and the greatest responses were observed in Colpophyllia natans, Montastraea annularis and Montastraeafaveolata. The most affected localities were closer to the mainland and had a bleached proportion up to 62.73+/-36.55%, with the highest proportion of affected colonies, whereas the farthest locality showed 20.25+/-14.00% bleached and the smallest proportion. The salinity in situ varied between 30 and 33ppm and high levels of turbidity were observed. According to the satellite images, in 2010 the surface water temperature reached 31 degree C in August, September and October, and resulted higher than those registered in 2008 and 2009. Regionally, chlorophyll values were higher in 2010 than in 2008 and 2009. The meteorological data indicated that precipitation in November 2010 was three times higher than in November 2009. Massive coral bleaching occurred due to a three month period of high temperatures followed by one month of intense ENSO-associated precipitation. However, this latter factor was likely the trigger because of the bleaching gradient observed.

  14. Effect of two different tooth bleaching techniques on microhardness of giomer

    Science.gov (United States)

    Bahari, Mahmoud; Naser-Alavi, Fereshteh; Behboodi, Soodabeh

    2017-01-01

    Background Tooth bleaching is a safe and conservative treatment modality to improve the esthetic appearance of discolored teeth. One of the problems with the use of bleaching agents is their possible effect on surface microhardness of resin-based materials. The present study was carried out to evaluate the effect of in-office and at-home bleaching on surface microhardness of giomer. Material and Methods Seventy-five disk-shaped giomer samples (Beautifil II) were prepared and cured with a light-curing unit. The samples were randomly assigned to three groups (n=25). In group 1 (control), the samples were stored in distilled water for 14 days. The samples in groups 2 and 3 underwent a bleaching procedure with 15% carbamide peroxide (CP) (8 hours daily) and 45% CP (30 minutes daily), respectively, for 14 days. Finally, the microhardness of samples was measured with Vickers hardness tester using a 100-g force for 20 seconds. One-way ANOVA was used to compare the mean microhardness values among the study groups, followed by post hoc Tukey test for two-by-two comparison of the groups. Statistical significance was set at P<0.05. Results One-way ANOVA showed significant differences in the mean microhardness values among the study groups (P<0.001). Based on the results of Tukey test, microhardness in the bleached groups was significantly less than that in the control group (P<0.0005). In addition, microhardness in the 45% CP group was significantly less than that in the 15% CP group (P<0.0005). Conclusions Use of both bleaching agents during in-office and at-home bleaching techniques resulted in a decrease in surface microhardness of giomer. The unfavorable effect of in-office bleaching (45% CP) was greater than that of at-home bleaching (15% CP). Key words:Dental restorations, hardness, tooth bleaching. PMID:28210444

  15. USING Mg(OH2 IN PEROXIDE BLEACHING OF WHEAT STRAW SODA-AQ PULP

    Directory of Open Access Journals (Sweden)

    Yanlan Liu

    2011-04-01

    Full Text Available The peroxide bleaching of high yield pulps from wood with Mg(OH2 has been developing recently in the pulp and paper industry. However, there is still a lack of data on the application of Mg(OH2 in peroxide bleaching of non-wood fibres. In this work, our purpose was to study the effect of Mg(OH2 on peroxide bleaching of wheat straw soda-AQ pulp. The results showed that Mg(OH2 significantly improved peroxide bleaching efficiency (expressed as the ratio between the brightness gain and the H2O2 consumption and selectivity (expressed as the ratio between the brightness gain and the viscosity losses of wheat straw soda-AQ pulp. The brightness, viscosity, and yield of bleached pulp can be significantly enhanced by increasing the replacement ratio of Mg(OH2. However, at 100% replacement of NaOH with Mg(OH2, the brightness of bleached pulp was much lower than that of the bleached pulp with NaOH as the sole alkaline source. When 24 to 73% of the NaOH was replaced with Mg(OH2, the COD of the bleaching filtrate was 11 to 38% lower than that of the NaOH as the sole alkaline source. The lower solubility and alkalinity of Mg(OH2, as well as the reduction of Cu ion content in bleached pulp were proposed as accounting for the favorable effect of Mg(OH2 on peroxide bleaching of wheat straw soda-AQ pulp.

  16. Influence of dental bleaching on marginal leakage of Class V restorations

    Directory of Open Access Journals (Sweden)

    Andréia Cristina Ramos Dorini

    2010-04-01

    Full Text Available Objective: Evaluate the in vitro effect of bleaching performed in the dental office and waiting time on the degree of microleakage in class V cavities with margins in enamel, restored with resin composite. Methods: Forty-five human third molars were used, in which the vestibular faces were bleached with 35% hydrogen peroxide activated with LED and the palatine faces were not bleached (control. The teeth were randomly divided into 3 groups with 15 teeth in each: Group 1, restored immediately after bleaching; Group 2, seven days after bleaching; and Group 3, fourteen days after bleaching. After cavity preparation, 35% phosphoric acid, Adper Single Bond 2 adhesive (3M ESPE, St. Paul, Mn, USA, and resin composite Filtek Z250 (3M ESPE, St. Paul, MN, USA were applied. The teeth were thermal cycled and sealed with red nail polish on the bleached faces and blue on the non bleached faces, except for 1mm around the restored region. The samples were classified according to the following scores: 0 = no leakage, 1 = minimum leakage (less than 1 / 3 the length of the wall, 2 = moderate leakage (1/3 to 2/3 of the wall and 3 = extensive leakage (over 2/3 of the wall. The data were submitted to the Kruskal-Wallis test at a level of significance of 5%. Results: The restorative procedure immediately after bleaching resulted in statistically higher microleakage values (p 0.05. Conclusion: Based on the results, it is advisable to wait at least 7 days after bleaching to make the definitive restoration.

  17. Bleaching phototrichogram: an improved method for hair growth assessment.

    Science.gov (United States)

    Lee, Seung Ho; Kwon, Oh Sang; Oh, Jun Kyu; Park, Won Seok; Moon, Sang Eun; Eun, Hee Chul

    2005-10-01

    The phototrichogram (PT) is a non-invasive tool for monitoring hair growth in vivo. However, the majority of PT techniques are of little use to clinicians bacause they are time-consuming and/or difficult to perform. Consequently, there is a need for an easy and time-saving PT technique. This study was performed to evaluate the accuracy and availability of a modified PT, bleaching phototrichogram (BPT), by comparing it with the conventional phototrichogram (CPT). Ten healthy male volunteers (age range 26-33 years) comprised the study subjects. Hairs were clipped from two adjacent circular areas in the occipital region of each subject. The clipped hairs in the first area were bleached and photographed two days later. The second area was photographed just after clipping and two days later. In each area, the following biological parameters of hair growth were analyzed; 1: hair density (number/cm2), 2: anagen hair ratio (%), 3: linear hair growth rate (mm/day), 4: non-vellus hair ratio (%) and 5: anagen hair thickness (microm). The hair density, anagen hair ratio, linear hair growth rate, and anagen hair thickness by BPT were similar to the CPT values with no significant differences, although the non-vellus hair ratio by BPT was higher than the CPT value. The BPT has a higher clinical usefulness than the CPT because it saves much time with satisfactory accuracy.

  18. Seychelles Lagoon Provides Corals with a Refuge from Bleaching

    Directory of Open Access Journals (Sweden)

    David Iluz

    2008-01-01

    Full Text Available An extensive bleaching event in the summer of the year 1997-1998 affected most reefs along East Africa's shores. In the aftermath of that episode, the reefs of Île Alphonse in the Seychelles were examined and it was found that reefs along the seaward slopes of the island lost >95% of their branching coral colonies, with considerably higher survival of massive species. Île Alphonse features a nearly circular shallow lagoon, with steep seaward slopes. Contrary to our expectations, mortality in the warmer lagoon was far lower than of coral colonies on the surrounding slopes, bathed in deeper and cooler waters. We suggest that corals in the lagoon were protected from UV radiation by leachate stemming from seagrass leaves steeped in the lagoon. Our measurements in the lagoon showed a strong attenuation of ultraviolet radiation, not observed in the waters outside the lagoon, and laboratory examination confirmed that the strong UV absorption of substances leached into seawater from decomposing leaves of the seagrass Thalassodendron (=Cymodocea testudinaceum. Our findings demonstrate the synergism between elevated seawater temperature and UV radiation in triggering bleaching on shallow reefs.

  19. Can heterotrophic uptake of dissolved organic carbon and zooplankton mitigate carbon budget deficits in annually bleached corals?

    Science.gov (United States)

    Levas, Stephen; Grottoli, Andréa G.; Schoepf, Verena; Aschaffenburg, Matthew; Baumann, Justin; Bauer, James E.; Warner, Mark E.

    2016-06-01

    Annual coral bleaching events due to increasing sea surface temperatures are predicted to occur globally by the mid-century and as early as 2025 in the Caribbean, and severely impact coral reefs. We hypothesize that heterotrophic carbon (C) in the form of zooplankton and dissolved organic carbon (DOC) is a significant source of C to bleached corals. Thus, the ability to utilize multiple pools of fixed carbon and/or increase the amount of fixed carbon acquired from one or more pools of fixed carbon (defined here as heterotrophic plasticity) could underlie coral acclimatization and persistence under future ocean-warming scenarios. Here, three species of Caribbean coral— Porites divaricata, P. astreoides, and Orbicella faveolata—were experimentally bleached for 2.5 weeks in two successive years and allowed to recover in the field. Zooplankton feeding was assessed after single and repeat bleaching, while DOC fluxes and the contribution of DOC to the total C budget were determined after single bleaching, 11 months on the reef, and repeat bleaching. Zooplankton was a large C source for P. astreoides, but only following single bleaching. DOC was a source of C for single-bleached corals and accounted for 11-36 % of daily metabolic demand (CHARDOC), but represented a net loss of C in repeat-bleached corals. In repeat-bleached corals, DOC loss exacerbated the negative C budgets in all three species. Thus, the capacity for heterotrophic plasticity in corals is compromised under annual bleaching, and heterotrophic uptake of DOC and zooplankton does not mitigate C budget deficits in annually bleached corals. Overall, these findings suggest that some Caribbean corals may be more susceptible to repeat bleaching than to single bleaching due to a lack of heterotrophic plasticity, and coral persistence under increasing bleaching frequency may ultimately depend on other factors such as energy reserves and symbiont shuffling.

  20. Skeletal isotope records of growth perturbations in Porites corals during the 1997-1998 mass bleaching event

    Science.gov (United States)

    Suzuki, A.; Gagan, M.; Fabricius, K.; Isdale, P.; Yukino, I.; Kawahata, H.

    2003-04-01

    Severe coral bleaching occurred throughout the tropics in 1997/98. We report skeletal UV fluorescence, oxygen isotope, and carbon isotope evidence for perturbations in coral skeletal growth due to bleaching at Ishigaki Island, Japan, and Pandora Reef, Great Barrier Reef. Bleached corals showed abrupt reductions in skeletal extension rate immediately after summer temperature maxima, indicating that bleaching inhibits coral calcification. A colony growing at the low tide line in Ishigaki exhibited clear blue UV fluorescent bands associated with recurrent growth interruptions. Based on the length of time-gaps observed in the annual isotopic cycle, the typical time required for a coral to recover from bleaching is estimated to be about 5--6 months. The effect of bleaching on the oxygen isotope ratio -- temperature relationship was negligible. However, the Ishigaki corals showed lower carbon isotope ratios during bleaching indicating depressed coral metabolism associated with a reduction in calcification. In contrast, skeletal carbon isotope ratios in the Pandora Reef corals exhibited little change in response to bleaching. This is because the records for Pandora Reef were derived from the shaded sides of coral colonies, where algal photosynthesis was particularly slow prior to bleaching, thus subduing the carbon isotope response to bleaching. Taken together, the isotopic and UV fluorescence signals can be used to reconstruct past bleaching events.

  1. Effect of different bleaching strategies on microhardness of a silorane-based composite resin

    Science.gov (United States)

    Bahari, Mahmoud; Savadi Oskoee, Siavash; Mohammadi, Narmin; Ebrahimi Chaharom, Mohammad Esmaeel; Godrati, Mostafa; Savadi Oskoee, Ayda

    2016-01-01

    Background. Dentists’ awareness of the effects of bleaching agents on the surface and mechanical properties of restorative materials is of utmost importance. Therefore, this in vitro study was undertaken to investigate the effects of different bleaching strategies on the microhardness of a silorane-based composite resin. Methods. Eighty samples of a silorane-based composite resin (measuring 4 mm in diameter and 2 mm in thickness) were prepared within acrylic molds. The samples were polished and randomly assigned to 4 groups (n=20). Group 1 (controls) were stored in distilled water for 2 weeks. The samples in group 2 underwent a bleaching procedure with 15% carbamide peroxide for two weeks two hours daily. The samples in group 3 were bleached with 35% hydrogen peroxide twice 5 days apart for 30 minutes each time. The samples in group 4 underwent a bleaching procedure with light-activated 35% hydrogen peroxide under LED light once for 40 minutes. Then the microhardness of the samples was determined using Vickers method. Data were analyzed with one-way ANOVA and post hoc Tukey tests (P 0.05). Conclusion. Bleaching agents decreased microhardness of silorane-based composite resin restorations, the magnitude of which depending on the bleaching strategy used. PMID:28096946

  2. Differential gene expression during thermal stress and bleaching in the Caribbean coral Montastraea faveolata.

    Science.gov (United States)

    DeSalvo, M K; Voolstra, C R; Sunagawa, S; Schwarz, J A; Stillman, J H; Coffroth, M A; Szmant, A M; Medina, M

    2008-09-01

    The declining health of coral reefs worldwide is likely to intensify in response to continued anthropogenic disturbance from coastal development, pollution, and climate change. In response to these stresses, reef-building corals may exhibit bleaching, which marks the breakdown in symbiosis between coral and zooxanthellae. Mass coral bleaching due to elevated water temperature can devastate coral reefs on a large geographical scale. In order to understand the molecular and cellular basis of bleaching in corals, we have measured gene expression changes associated with thermal stress and bleaching using a complementary DNA microarray containing 1310 genes of the Caribbean coral Montastraea faveolata. In a first experiment, we identified differentially expressed genes by comparing experimentally bleached M. faveolata fragments to control non-heat-stressed fragments. In a second experiment, we identified differentially expressed genes during a time course experiment with four time points across 9 days. Results suggest that thermal stress and bleaching in M. faveolata affect the following processes: oxidative stress, Ca(2+) homeostasis, cytoskeletal organization, cell death, calcification, metabolism, protein synthesis, heat shock protein activity, and transposon activity. These results represent the first medium-scale transcriptomic study focused on revealing the cellular foundation of thermal stress-induced coral bleaching. We postulate that oxidative stress in thermal-stressed corals causes a disruption of Ca(2+) homeostasis, which in turn leads to cytoskeletal and cell adhesion changes, decreased calcification, and the initiation of cell death via apoptosis and necrosis.

  3. Inhibition of photosynthetic CO₂ fixation in the coral Pocillopora damicornis and its relationship to thermal bleaching.

    Science.gov (United States)

    Hill, Ross; Szabó, Milán; ur Rehman, Ateeq; Vass, Imre; Ralph, Peter J; Larkum, Anthony W D

    2014-06-15

    Two inhibitors of the Calvin-Benson cycle [glycolaldehyde (GA) and potassium cyanide (KCN)] were used in cultured Symbiodinium cells and in nubbins of the coral Pocillopora damicornis to test the hypothesis that inhibition of the Calvin-Benson cycle triggers coral bleaching. Inhibitor concentration range-finding trials aimed to determine the appropriate concentration to generate inhibition of the Calvin-Benson cycle, but avoid other metabolic impacts to the symbiont and the animal host. Both 3 mmol l(-1) GA and 20 μmol l(-1) KCN caused minimal inhibition of host respiration, but did induce photosynthetic impairment, measured by a loss of photosystem II function and oxygen production. GA did not affect the severity of bleaching, nor induce bleaching in the absence of thermal stress, suggesting inhibition of the Calvin-Benson cycle by GA does not initiate bleaching in P. damicornis. In contrast, KCN did activate a bleaching response through symbiont expulsion, which occurred in the presence and absence of thermal stress. While KCN is an inhibitor of the Calvin-Benson cycle, it also promotes reactive oxygen species formation, and it is likely that this was the principal agent in the coral bleaching process. These findings do not support the hypothesis that temperature-induced inhibition of the Calvin-Benson cycle alone induces coral bleaching.

  4. Relationships between temperature, bleaching and white syndrome on the Great Barrier Reef

    Science.gov (United States)

    Ban, S. S.; Graham, N. A. J.; Connolly, S. R.

    2013-03-01

    Coral bleaching and disease have often been hypothesized to be mutually reinforcing or co-occurring, but much of the research supporting this has only drawn an implicit connection through common environmental predictors. In this study, we examine whether an explicit relationship between white syndrome and bleaching exists using assemblage-level monitoring data from up to 112 sites on reef slopes spread throughout the Great Barrier Reef over 11 years of monitoring. None of the temperature metrics commonly used to predict mass bleaching performed strongly when applied to these data. Furthermore, the inclusion of bleaching as a predictor did not improve model skill over baseline models for predicting white syndrome. Similarly, the inclusion of white syndrome as a predictor did not improve models of bleaching. Evidence for spatial co-occurrence of bleaching and white syndrome at the assemblage level in this data set was also very weak. These results suggest the hypothesized relationship between bleaching and disease events may be weaker than previously thought, and more likely to be driven by common responses to environmental stressors, rather than directly facilitating one another.

  5. Effect of different restorative procedures on the fracture resistance of teeth submitted to internal bleaching

    Directory of Open Access Journals (Sweden)

    Andiara Ribeiro Roberto

    2012-02-01

    Full Text Available The aim of this study was to evaluate the influence of different restorative procedures on the fracture resistance of endodontically treated teeth submitted to intracoronal bleaching. Fifty upper central incisors were distributed into 5 groups: GI - healthy teeth; GII - endodontically treated teeth sealed with Coltosol; GIII - endodontically treated teeth bleached and sealed with Coltosol; GIV - endodontically treated teeth bleached and restored with composite resin; and GV - endodontically treated teeth bleached and restored with a fiberglass post and composite resin. In the bleached specimens, a cervical seal was made prior to bleaching with 38% hydrogen peroxide. The gel was applied on the buccal surface and in the pulp chamber, and was then light-activated for 45 s. This procedure was repeated three times per session for four sessions, and each group was submitted to the restorative procedures described above. The specimens were submitted to fracture resistance testing in a universal testing machine. There were statistically significant differences among the groups (p 0.05. The restorative procedures using composite resin were found to successfully restore the fracture resistance of endodontically treated and bleached teeth.

  6. A comparison of the bleaching effectiveness of chlorine dioxide and hydrogen peroxide on dental composite.

    Science.gov (United States)

    Agnihotry, Anirudha; Gill, Karanjot S; Singhal, Deepak; Fedorowicz, Zbys; Dash, Sambit; Pedrazzi, Vinicius

    2014-01-01

    This study was carried out to verify if composites could be bleached using chlorine dioxide as compared with hydrogen peroxide. 3M ESPE Filtek Z350 Universal Restorative discs were prepared (n=40), with dimensions 5 mm diameter x 2 mm thickness. The discs were divided into 4 groups of 10 discs each. Color assessment was performed by CIEDE2000. The discs were stained with coffee, tea, wine and distilled water (control) solutions for 14 days, 5 hours daily. Color assessment was repeated on stained discs and followed by bleaching of 5 discs from each group using chlorine dioxide and hydrogen peroxide in-office systems. Finally, a last color assessment was performed and compared statistically. DE2000 after bleaching was very close to baseline for both the bleaching agents, although chlorine dioxide showed better results than hydrogen peroxide. After staining, there was a clinically significant discoloration (∆E2000≥3.43) for the tea, coffee and wine groups, and discoloration (∆E2000) was seen more in the wine group as compared to tea and coffee. Overall, the control group (distilled water) had the least color change in the three intervals. After bleaching, the color in all specimens returned close to the baseline. The color differences between bleaching and baseline were less than 3.43 for all groups. The obtained results show that chlorine dioxide is slightly superior to hydrogen peroxide in the bleaching of composites, while maintaining the shade of the composite close to the baseline.

  7. MODIFIED OPAL: A NOVEL STABILIZER FOR HYDROGEN PEROXIDE BLEACHING OF PULPS

    Institute of Scientific and Technical Information of China (English)

    XuerenQian; XianhuiAn; WenboLiu; GangYu; ZhanqianSong

    2004-01-01

    The possibility of modified opal as the stabilizer ofhydrogen peroxide bleaching was investigated. Theresults showed that the modified opal in place ofsodium silicate as the stabilizer of hydrogen peroxidebleaching is feasible. At the same dosage, above 3%ISO can be increased for both wheat straw pulp anddeinked pulp. The stabilizing ability of the modifiedopal to hydrogen peroxide bleaching of pulp isimproved markedly. It is favorable for bleaching toincrease temperature and time within a permissiveextent. The suitable process conditions are I0% ofpulp consistency, 3% of hydrogen peroxide, 1.5% ofsodium hydroxide, 3% of the modified opal, 70~"and 60 min when the modified opal is used as thestabilizer of hydrogen peroxide bleaching. At theseconditions, the brightness gain can reach about 16%ISO for wheat straw pulp. In addition, it is favorablefor bleaching to add a little magnesium sulfate whenthe modified opal is used as the stabilizer ofhydrogen peroxide bleaching, the brightness of pulpcan increase 1%ISO if0.05% of magnesium sulfate isadded. The cost analysis indicated that the modifiedopal is superior to sodium silicate as the stabilizer ofhydrogen peroxide bleaching in economical aspectand has further the potential of market development.

  8. Effect of newer antioxidants on the bond strength of composite on bleached enamel

    Directory of Open Access Journals (Sweden)

    M Manoharan

    2016-01-01

    Full Text Available Aim: The study aims to evaluate the effect of the application of two antioxidants on the bond strength of composite resin to bleached enamel. Materials and Methods: Eighty enamel surfaces were obtained from forty human extracted premolars. Specimens were randomly divided into four groups (n = 20. Group 1: No bleaching (control; Group 2a: Bleaching with 15% carbamide peroxide gel; Group 2b: Bleaching, followed by application of 10% sodium ascorbate gel; Group 2c: Bleaching, followed by application of 5% proanthocyanidin agent. Surfaces were etched followed by application of total etch bonding system, and composite resin cylinders were bonded. Specimens were tested for shear bond strength. Statistical Analysis Used: One-way analysis of variance was used for multiple group comparison and post hoc Tukey′s test for individual group-wise comparison. Results: Significantly higher shear bond strength values were observed in Group 2c and 2b as compared with Group 1 and 2a (P < 0.05. Among the antioxidants, Group 2c showed significantly higher shear bond strength values than Group 2b (P < 0.05. Conclusion: It can be concluded that the use of antioxidant before bonding procedures on bleached enamel completely neutralizes the deleterious effects of bleaching and increases the bond strength significantly.

  9. Effect of three nanobiomaterials on the surface roughness of bleached enamel

    Directory of Open Access Journals (Sweden)

    Maryam Khoroushi

    2015-01-01

    Full Text Available Background: The ever-increasing demand for enhanced esthetic appearance has resulted in significant developments in bleaching products. However, the enamel surface roughness (SR might be negatively affected by bleaching agents. This in vitro study was undertaken to compare the effects of three nanobiomaterials on the enamel SR subsequent to bleaching. Materials and Methods: The crowns of six extracted intact nonerupted human third molars were sectioned. Five dental blocks measuring 2 mm × 3 mm × 4 mm were prepared from each tooth and placed in colorless translucent acrylic resin. The enamel areas from all the specimens were divided into five groups (n = 6: Group 1 did not undergo any bleaching procedures; Group 2 was bleached with a 40% hydrogen peroxide (HP gel; Groups 3, 4, and 5 were bleached with a 40% HP gel modified by bioactive glass (BAG, amorphous calcium phosphate, and hydroxyapatite, respectively. The enamel SR was evaluated before and after treatment by atomic force microscopy. The data were analyzed by Kruskal–Wallis and Mann–Whitney tests. Results: SR increased significantly in the HP group. SR decreased significantly in the HP gel modified by BAG group as compared to other groups. Conclusions: Within the limitations of this study, incorporation of each one of the three test biomaterials proved effective in decreasing enamel SR subsequent to in-office bleaching technique.

  10. Ion release from a composite resin after exposure to different 10% carbamide peroxide bleaching agents

    Directory of Open Access Journals (Sweden)

    Renata Plá Rizzolo Bueno

    2012-06-01

    Full Text Available OBJECTIVE: This in vitro study evaluated the influence of two 10% carbamide peroxide bleaching agents - a commercial product (Opalescence PF; Ultradent Products, Inc. and a bleaching agent prepared in a compounding pharmacy - on the chemical degradation of a light-activated composite resin by determining its release of ions before and after exposure to the agents. MATERIAL AND METHODS: Thirty composite resin (Filtek Z250; 3M/ESPE samples were divided into three groups: group I (exposed to Opalescence PF commercial bleaching agent, group II (exposed to a compounded bleaching agent and group III (control - Milli-Q water. After 14 days of exposure, with a protocol of 8 h of daily exposure to the bleaching agents and 16 h of immersion in Milli-Q water, the analysis of ion release was carried out using a HP 8453 spectrophotometer. The values were analyzed statistically by ANOVA, Tukey's test and the paired t-tests. The significance level was set at 5%. RESULTS: After 14 days of the experiment, statistically significant difference was found between group II and groups I and III, with greater ion release from the composite resin in group II. CONCLUSIONS: The compounded bleaching agent had a more aggressive effect on the composite resin after 14 days of exposure than the commercial product and the control (no bleaching.

  11. Evaluation of shear bond strength of orthodontic brackets bonded on the tooth surface after internal bleaching

    Directory of Open Access Journals (Sweden)

    Nadia de Souza FERREIRA

    Full Text Available Introduction: There is great demand for esthetic treatment by patients who have discolored teeth, because currently aesthetic standards have become stricter and many patients have tooth bleaching procedures performed before or during orthodontic treatment. Objective: To evaluate the bonding of orthodontic brackets to human molars after internal tooth bleaching. Material and method: Forty molars were divided into four groups according to the bleaching agent used: PS sodium perborate + water; PC carbamide peroxide; PC + PS carbamide peroxide + sodium perborate; Cont water (control group. Bleaching agents placed inside the pulp chambers were replaced every 7 days for 2 weeks, and the brackets were bonded 30 days after the end of bleaching. The shear strength test was performed in a universal testing machine (Emic. Result: ANOVA with a significance level of 5% (p > 0.05, showed no statistically significant difference between groups (p = 0.1214. Conclusion: It was concluded that the different bleaching agents studied did not interfere with the bond strength of brackets to enamel and bonding the brackets 30 days after internal bleaching is a safe procedure.

  12. Evaluation of cotton-fabric bleaching using hydrogen peroxide and Blue LED

    Science.gov (United States)

    de Oliveira, Bruno P.; Moriyama, Lilian T.; Bagnato, Vanderlei S.

    2015-06-01

    The raw cotton production requires multiple steps being one of them the removal of impurities acquired during previous processes. This procedure is widely used by textile industries around the world and is called bleaching. The raw cotton is composed by cellulosic and non-cellulosic materials like waxes, pectins and oils, which are responsible for its characteristic yellowish color. The bleaching process aims to remove the non-cellulosic materials concentration in the fabric, increasing its whiteness degree. The most used bleaching method utilizes a bath in an alkali solution of hydrogen peroxide, stabilizers and buffer solutions under high temperature. In the present study we evaluated the possibility of using a blue illumination for the bleaching process. We used blue LEDs (450 nm) to illuminate an acid hydrogen peroxide solution at room temperature. The samples treated by this method were compared with the conventional bleaching process through a colorimetric analysis and by a multiple comparison visual inspection by volunteers. The samples were also studied by a tensile test in order to verify the integrity of the cloth after bleaching. The results of fabric visual inspection and colorimetric analysis showed a small advantage for the sample treated by the standard method. The tensile test showed an increasing on the yield strength of the cloth after blue light bleaching. The presented method has great applicability potential due to the similar results compared to the standard method, with relative low cost and reduced production of chemical waste.

  13. Clinical performance of topical sodium fluoride when supplementing carbamide peroxide at-home bleaching gel.

    Science.gov (United States)

    Barcellos, Daphne Camara; Batista, Graziela Ribeiro; da Silva, Melissa Aline; Pleffken, Patricia Rondon; Valera, Marcia Carneiro

    2015-01-01

    This clinical study evaluated the use of 0.11% topical sodium fluoride (SF) desensitizing agent to treat tooth sensitivity during a nightguard tooth whitening procedure. Thirty-two subjects bleached their teeth with 10% carbamide peroxide (CP) gel using an at-home bleaching technique with custom trays. During bleaching treatment, subjects were divided into 2 groups (n = 16). The subjects in Group 1 received a topical gel containing 0.11% SF; the subjects in Group 2 received a placebo gel (PG). Each subject was instructed to place the gel in his/her bleaching tray for 30 min every day following bleaching treatment. Results showed the use of SF did not affect the whitening efficacy of the 10% CP gel. Subjects who received the PG had significantly higher tooth sensitivity when compared with subjects who received SF (P < 0.00). The use of daily 0.11% SF after 10% CP bleaching gel reduced tooth sensitivity during the bleaching treatment.

  14. Excess algal symbionts increase the susceptibility of reef corals to bleaching

    Science.gov (United States)

    Cunning, Ross; Baker, Andrew C.

    2013-03-01

    Rising ocean temperatures associated with global climate change are causing mass coral bleaching and mortality worldwide. Understanding the genetic and environmental factors that mitigate coral bleaching susceptibility may aid local management efforts to help coral reefs survive climate change. Although bleaching susceptibility depends partly on the genetic identity of a coral's algal symbionts, the effect of symbiont density, and the factors controlling it, remain poorly understood. By applying a new metric of symbiont density to study the coral Pocillopora damicornis during seasonal warming and acute bleaching, we show that symbiont cell ratio density is a function of both symbiont type and environmental conditions, and that corals with high densities are more susceptible to bleaching. Higher vulnerability of corals with more symbionts establishes a quantitative mechanistic link between symbiont density and the molecular basis for coral bleaching, and indicates that high densities do not buffer corals from thermal stress, as has been previously suggested. These results indicate that environmental conditions that increase symbiont densities, such as nutrient pollution, will exacerbate climate-change-induced coral bleaching, providing a mechanistic explanation for why local management to reduce these stressors will help coral reefs survive future warming.

  15. Dietary shift in corallivorous Drupella snails following a major bleaching event at Koh Tao, Gulf of Thailand

    Science.gov (United States)

    Hoeksema, B. W.; Scott, C.; True, J. D.

    2013-06-01

    The island Koh Tao in the western Gulf of Thailand suffered severe coral bleaching in 2010. Its mushroom coral fauna of 20 species was surveyed during the bleaching in 2010 and after the bleaching in 2011. Multi-species assemblages of free-living mushroom corals occurred around the island, two of which were invaded by corallivorous Drupella snails after the bleaching. Previously these gastropods were known to mainly consume branching corals and hardly any mushroom corals. The snails were found preying on four fungiid species, three of which were susceptible to bleaching. The dietary shift became apparent after populations of preferred prey species (Acroporidae and Pocilloporidae) had died during the bleaching event. It seems that bleaching mortality reduced the availability of preferred prey, causing the corallivores to switch to less preferred species that occur in dense aggregations.

  16. Skeletal records of community-level bleaching in Porites corals from Palau

    Science.gov (United States)

    Barkley, Hannah C.; Cohen, Anne L.

    2016-12-01

    Tropical Pacific sea surface temperature is projected to rise an additional 2-3 °C by the end of this century, driving an increase in the frequency and intensity of coral bleaching. With significant global coral reef cover already lost due to bleaching-induced mortality, efforts are underway to identify thermally tolerant coral communities that might survive projected warming. Massive, long-lived corals accrete skeletal bands of anomalously high density in response to episodes of thermal stress. These "stress bands" are potentially valuable proxies for thermal tolerance, but to date their application to questions of community bleaching history has been limited. Ecological surveys recorded bleaching of coral communities across the Palau archipelago during the 1998 and 2010 warm events. Between 2011 and 2015, we extracted skeletal cores from living Porites colonies at 10 sites spanning barrier reef and lagoon environments and quantified the proportion of stress bands present in each population during bleaching years. Across Palau, the prevalence of stress bands tracked the severity of thermal stress, with more stress bands occurring in 1998 (degree heating weeks = 13.57 °C-week) than during the less severe 2010 event (degree heating weeks = 4.86 °C-week). Stress band prevalence also varied by reef type, as more corals on the exposed barrier reef formed stress bands than did corals from sheltered lagoon environments. Comparison of Porites stress band prevalence with bleaching survey data revealed a strong correlation between percent community bleaching and the proportion of colonies with stress bands in each year. Conversely, annual calcification rates did not decline consistently during bleaching years nor did annually resolved calcification histories always track interannual variability in temperature. Our data suggest that stress bands in massive corals contain valuable information about spatial and temporal trends in coral reef bleaching and can aid in

  17. Coscinaraea marshae corals that have survived prolonged bleaching exhibit signs of increased heterotrophic feeding

    Science.gov (United States)

    Bessell-Browne, Pia; Stat, Michael; Thomson, Damian; Clode, Peta L.

    2014-09-01

    Colonies of Coscinaraea marshae corals from Rottnest Island, Western Australia have survived for more than 11 months in various bleached states following a severe heating event in the austral summer of 2011. These colonies are situated in a high-latitude, mesophotic environment, which has made their long-term survival of particular interest as such environments typically suffer from minimal thermal pressures. We have investigated corals that remain unbleached, moderately bleached, or severely bleached to better understand potential survival mechanisms utilised in response to thermal stress. Specifically, Symbiodinium (algal symbiont) density and genotype, chlorophyll- a concentrations, and δ13C and δ15N levels were compared between colonies in the three bleaching categories. Severely bleached colonies housed significantly fewer Symbiodinium cells ( p coral in both severely and moderately bleached colonies, with clade C and a mixed clade population detected. In unbleached colonies, only clade B was observed. Levels of δ15N indicate that severely bleached colonies are utilising heterotrophic feeding mechanisms to aid survival whilst bleached. Collectively, these results suggest that these C. marshae colonies can survive with low symbiont and chlorophyll densities, in response to prolonged thermal stress and extended bleaching, and increase heterotrophic feeding levels sufficiently to meet energy demands, thus enabling some colonies to survive and recover over long time frames. This is significant as it suggests that corals in mesophotic and high-latitude environments may possess considerable plasticity and an ability to tolerate and adapt to large environmental fluctuations, thereby improving their chances of survival as climate change impacts coral ecosystems worldwide.

  18. Seasonal mesophotic coral bleaching of Stylophora pistillata in the Northern Red Sea.

    Science.gov (United States)

    Nir, Orit; Gruber, David F; Shemesh, Eli; Glasser, Eliezra; Tchernov, Dan

    2014-01-01

    Coral bleaching occurs when environmental stress induces breakdown of the coral-algae symbiosis and the host initiates algae expulsion. Two types of coral bleaching had been thoroughly discussed in the scientific literature; the first is primarily associated with mass coral bleaching events; the second is a seasonal loss of algae and/or pigments. Here, we describe a phenomenon that has been witnessed for repeated summers in the mesophotic zone (40-63 m) in the northern Red Sea: seasonal bleaching and recovery of several hermatypic coral species. In this study, we followed the recurring bleaching process of the common coral Stylophora pistillata. Bleaching occurred from April to September with a 66% decline in chlorophyll a concentration, while recovery began in October. Using aquarium and transplantation experiments, we explored environmental factors such as temperature, photon flux density and heterotrophic food availability. Our experiments and observations did not yield one single factor, alone, responsible for the seasonal bleaching. The dinoflagellate symbionts (of the genus Symbiodinium) in shallow (5 m) Stylophora pistillata were found to have a net photosynthetic rate of 56.98-92.19 µmol O2 cm(-2) day(-1). However, those from mesophotic depth (60 m) during months when they are not bleached are net consumers of oxygen having a net photosynthetic rate between -12.86 - (-10.24) µmol O2 cm(-2) day(-1). But during months when these mesophotic corals are partially-bleached, they yielded higher net production, between -2.83-0.76 µmol O2 cm(-2) day(-1). This study opens research questions as to why mesophotic zooxanthellae are more successfully meeting the corals metabolic requirements when Chl a concentration decreases by over 60% during summer and early fall.

  19. Effects of different concentrations of carbamide peroxide and bleaching periods on the roughness of dental ceramics

    Directory of Open Access Journals (Sweden)

    Sérgio Augusto Morey Ourique

    2011-10-01

    Full Text Available The wide use of dental bleaching treatment has brought concern about the possible effects of hydrogen peroxide on dental tissue and restorative materials. The objective of this study was to evaluate in vitro the effect of nightguard bleaching on the surface roughness of dental ceramics after different periods of bleaching treatment. Fifteen specimens of 5 × 3 × 1 mm were created with three dental ceramics following the manufacturers' instructions: IPS Classic (Ivoclar-Vivadent; IPS d.Sign (Ivoclar-Vivadent; and VMK-95 (Vita. A profilometer was used to evaluate baseline surface roughness (Ra values of all ceramics by five parallel measurements with five 0.25 mm cut off (Λc at 0.1 mm/s. Afterwards, all specimens were submitted to 6-h daily bleaching treatments with 10% or 16% carbamide peroxide (Whiteness- FGM for 21 days, while control groups from each ceramic system were stored in artificial saliva. The surface roughness of all groups was evaluated after 18 h, 42 h, 84 h, and 126 h of bleaching treatment. The surface roughness of each specimen (n = 5 was based on the mean value of five parallel measurements in each time and all data were submitted to two-way repeated measures ANOVA and Tukey's post-hoc test (α = 0.05. No significant differences in ceramic surface roughness were observed between untreated and bleached ceramic surfaces, regardless of bleaching intervals or bleaching treatments. This study provided evidence that at-home bleaching systems do not cause detrimental effects on surface roughness of dental ceramics.

  20. Caribbean corals in crisis: record thermal stress, bleaching, and mortality in 2005.

    Directory of Open Access Journals (Sweden)

    C Mark Eakin

    Full Text Available BACKGROUND: The rising temperature of the world's oceans has become a major threat to coral reefs globally as the severity and frequency of mass coral bleaching and mortality events increase. In 2005, high ocean temperatures in the tropical Atlantic and Caribbean resulted in the most severe bleaching event ever recorded in the basin. METHODOLOGY/PRINCIPAL FINDINGS: Satellite-based tools provided warnings for coral reef managers and scientists, guiding both the timing and location of researchers' field observations as anomalously warm conditions developed and spread across the greater Caribbean region from June to October 2005. Field surveys of bleaching and mortality exceeded prior efforts in detail and extent, and provided a new standard for documenting the effects of bleaching and for testing nowcast and forecast products. Collaborators from 22 countries undertook the most comprehensive documentation of basin-scale bleaching to date and found that over 80% of corals bleached and over 40% died at many sites. The most severe bleaching coincided with waters nearest a western Atlantic warm pool that was centered off the northern end of the Lesser Antilles. CONCLUSIONS/SIGNIFICANCE: Thermal stress during the 2005 event exceeded any observed from the Caribbean in the prior 20 years, and regionally-averaged temperatures were the warmest in over 150 years. Comparison of satellite data against field surveys demonstrated a significant predictive relationship between accumulated heat stress (measured using NOAA Coral Reef Watch's Degree Heating Weeks and bleaching intensity. This severe, widespread bleaching and mortality will undoubtedly have long-term consequences for reef ecosystems and suggests a troubled future for tropical marine ecosystems under a warming climate.

  1. Influence of Enamel Thickness on Bleaching Efficacy: An In-Depth Color Analysis

    Science.gov (United States)

    Públio, Juliana do Carmo; D’Arce, Maria Beatriz Freitas; Catelan, Anderson; Ambrosano, Gláucia Maria Bovi; Aguiar, Flávio Henrique Baggio; Lovadino, José Roberto; Lima, Débora Alves Nunes Leite

    2016-01-01

    This study evaluated the influence of different enamel thicknesses and bleaching agents on treatment efficacy in-depth by spectrophotometry color analysis. Eighty bovine dental fragments were previously stained in black tea solution and randomly assigned into eight groups (n=10), 1.75mm dentin thickness and different enamel thicknesses as follows: 0.5mm, 1.0mm planned, 1.0mm unplanned (aprismatic enamel), and absence of enamel. The 10% carbamide peroxide (CP) and 35% hydrogen peroxide (HP) bleaching gels were applied on the enamel surface following the manufacturer's recommendations. Color of underlying dentin was evaluated at four times: after staining with tea (baseline) and after each one of the three weeks of bleaching treatment, by CIE L*a*b* system using reflectance spectrophotometer (CM 700d, Konica Minolta). The ΔE, ΔL, Δa, and Δb values were recorded and subjected to repeated measures ANOVA and Tukey’s test (α=0.05). The results showed an increase on lightness (L*), with decreased redness (a*) and yellowness (b*). At first and second week, bleaching with CP showed higher whitening effectiveness compared to bleaching with HP and the presence of aprismatic enamel significantly reduced ΔE for bleaching with CP. After three weeks of bleaching, few differences were observed between CP and HP groups, and outer enamel layer caused no influence on bleaching effectiveness. Overall, both at-home and in-office bleaching treatments were effective and the presence of aprismatic enamel did not interfere on the whitening efficacy. PMID:27708725

  2. Caribbean Corals in Crisis: Record Thermal Stress, Bleaching, and Mortality in 2005

    Science.gov (United States)

    Eakin, C. Mark; Morgan, Jessica A.; Heron, Scott F.; Smith, Tyler B.; Liu, Gang; Alvarez-Filip, Lorenzo; Baca, Bart; Bartels, Erich; Bastidas, Carolina; Bouchon, Claude; Brandt, Marilyn; Bruckner, Andrew W.; Bunkley-Williams, Lucy; Cameron, Andrew; Causey, Billy D.; Chiappone, Mark; Christensen, Tyler R. L.; Crabbe, M. James C; Day, Owen; de la Guardia, Elena; Díaz-Pulido, Guillermo; DiResta, Daniel; Gil-Agudelo, Diego L.; Gilliam, David S.; Ginsburg, Robert N.; Gore, Shannon; Guzmán, Héctor M.; Hendee, James C.; Hernández-Delgado, Edwin A.; Husain, Ellen; Jeffrey, Christopher F. G.; Jones, Ross J.; Jordán-Dahlgren, Eric; Kaufman, Les S.; Kline, David I.; Kramer, Philip A.; Lang, Judith C.; Lirman, Diego; Mallela, Jennie; Manfrino, Carrie; Maréchal, Jean-Philippe; Marks, Ken; Mihaly, Jennifer; Miller, W. Jeff; Mueller, Erich M.; Muller, Erinn M.; Orozco Toro, Carlos A.; Oxenford, Hazel A.; Ponce-Taylor, Daniel; Quinn, Norman; Ritchie, Kim B.; Rodríguez, Sebastián; Ramírez, Alberto Rodríguez; Romano, Sandra; Samhouri, Jameal F.; Sánchez, Juan A.; Schmahl, George P.; Shank, Burton V.; Skirving, William J.; Steiner, Sascha C. C.; Villamizar, Estrella; Walsh, Sheila M.; Walter, Cory; Weil, Ernesto; Williams, Ernest H.; Roberson, Kimberly Woody; Yusuf, Yusri

    2010-01-01

    Background The rising temperature of the world's oceans has become a major threat to coral reefs globally as the severity and frequency of mass coral bleaching and mortality events increase. In 2005, high ocean temperatures in the tropical Atlantic and Caribbean resulted in the most severe bleaching event ever recorded in the basin. Methodology/Principal Findings Satellite-based tools provided warnings for coral reef managers and scientists, guiding both the timing and location of researchers' field observations as anomalously warm conditions developed and spread across the greater Caribbean region from June to October 2005. Field surveys of bleaching and mortality exceeded prior efforts in detail and extent, and provided a new standard for documenting the effects of bleaching and for testing nowcast and forecast products. Collaborators from 22 countries undertook the most comprehensive documentation of basin-scale bleaching to date and found that over 80% of corals bleached and over 40% died at many sites. The most severe bleaching coincided with waters nearest a western Atlantic warm pool that was centered off the northern end of the Lesser Antilles. Conclusions/Significance Thermal stress during the 2005 event exceeded any observed from the Caribbean in the prior 20 years, and regionally-averaged temperatures were the warmest in over 150 years. Comparison of satellite data against field surveys demonstrated a significant predictive relationship between accumulated heat stress (measured using NOAA Coral Reef Watch's Degree Heating Weeks) and bleaching intensity. This severe, widespread bleaching and mortality will undoubtedly have long-term consequences for reef ecosystems and suggests a troubled future for tropical marine ecosystems under a warming climate. PMID:21125021

  3. At-home bleaching: pulpal effects and tooth sensitivity issues, part II.

    Science.gov (United States)

    Swift, Edward J

    2006-01-01

    The most common side effect of at-home bleaching is transient tooth sensitivity. Despite its high frequency, this phenomenon is not well understood. This is the second of a two-part Critical Appraisal on tooth sensitivity associated with at-home bleaching. The first installment reviewed articles that focus on the incidence of sensitivity, long-term effects of bleaching, and related pulpal concerns. This installment also covers pulpal concerns, as well as the prevention of sensitivity during at-home whitening treatments.

  4. Bleaching of browned water yam (Dioscorea alata) with African oil bean seed lipoxygenase (Part 2).

    Science.gov (United States)

    Anokwulu, M N

    2004-01-01

    Purified African oil bean seed lipoxygenase was used to bleach water yam tubers that were browned by exposing their cut surfaces to air. The enzyme solution destroyed the polyphenols extracted from the browned water yams and the polyphenols at the browned yam tubers which resulted in the bleaching of the browned yam tubers to their original white colour. The destruction of the polyphenol extract and the bleaching of the browned yam tubers were found to be dependent on the enzyme concentration of the enzyme.

  5. PENYAMAKAN KULIT IKAN NILA (Oreochromis sp.) DENGAN PERLAKUAN PEMUCATAN (BLEACHING) MENGGUNAKAN PEROKSIDA

    OpenAIRE

    Hak, Nurul

    2016-01-01

    Research for tanning fish skin nile (Oreochromis sp.) on bleaching treatment has been done. Concentration of peroxide as bleaching agent variated in 2, 4, and 6% (v/w) and non bleaching process as a control. As a nile Leather product research characterized trough physic parameter, chemical and organoleptic analysis. Result of nile leather product the optimal amount of peroxide was 4% which resulted in tensile strength of 205 kg/cm2, elongation of 84,67%, sewing strength of 117,29%, and rigid t...

  6. Performance of an Argentinian acid-activated bentonite in the bleaching of soybean oil

    Directory of Open Access Journals (Sweden)

    Foletto E.L.

    2003-01-01

    Full Text Available In this work, a bentonite clay from Mendoza, Argentina was activated with H2SO4 (4 and 8 N at 90ºC for 2 and 3.5 hours. Under these conditions several cations were removed from the octahedral sheet (Mg, Al, and Fe and the DTA-TGA curves of the solids obtained after treatment were modified. Treatment time and acid concentration increased the degree of destruction of the bentonite structure. Activated samples were tested in order to verify their capacity to bleach soybean oil and were compared to a standard commercial bleaching clay. Treated samples are more efficient in bleaching than the standard.

  7. The role of bound chlorine in the brightness reversion of bleached hardwood kraft pulp

    Directory of Open Access Journals (Sweden)

    Kátia Maria Morais Eiras

    2009-01-01

    Full Text Available Our previous paper showed fragmentary evidence that pulp brightness reversion may be negatively affected by its organically bound chlorine (OX content. A thorough investigation on eucalyptus kraft pulp led to the conclusion that OX increases reversion of certain pulps but this trend is not universal. Alkaline bleaching stages decrease reversion regardless of pulp OX content. Pulps bleached with high temperature chlorine dioxide revert less than those bleached with conventional chlorine dioxide in sequences ending with a chlorine dioxide stage but similarly in sequences ending with a final peroxide stage. The use of secondary condensate for pulp washing decreases reversion.

  8. Effect of two different tooth bleaching techniques on microhardness of giomer

    OpenAIRE

    Kimyai, Soodabeh; Bahari, Mahmoud; Naser-Alavi, Fereshteh; Behboodi, Soodabeh

    2017-01-01

    Background Tooth bleaching is a safe and conservative treatment modality to improve the esthetic appearance of discolored teeth. One of the problems with the use of bleaching agents is their possible effect on surface microhardness of resin-based materials. The present study was carried out to evaluate the effect of in-office and at-home bleaching on surface microhardness of giomer. Material and Methods Seventy-five disk-shaped giomer samples (Beautifil II) were prepared and cured with a ligh...

  9. Tentative Research of Short Process of Jute Degumming and Bleaching

    Institute of Scientific and Technical Information of China (English)

    WANG Wei-ming; WANG Feng; CAI Zai-sheng; YU Jian-yong

    2008-01-01

    The feasibility of combination process of jute degumming and bleaching with alkali-hydrogen peroxide in one-step-one-bath was discussed.The combination process basically has the similar function as the traditional two-step-two-bath method.The factors such as hydrogen peroxide concentration.CBI concentration, sodium hydroxide concentration, treatment time and temperature were studied respectively, and then an orthogonal experiment was designed to study the interactions among the hydrogen peroxide concentration, CBI concentration, sodium hydroxide concentration.After the designed experiments, the optimum treatment conditions were obtained as follows: hydrogen peroxide of 12 g/L, sodium hydroxide of 4 g/L, CBI of 4 g/L, JFC of 1 g/L, treatment time of 60 min and temperature of 75℃

  10. Multicolor bleach-rate imaging enlightens in vivo sterol transport

    DEFF Research Database (Denmark)

    Wüstner, Daniel; Sage, Daniel

    2011-01-01

    ) labelled with GFP-tagged RME-1 (GFP-RME-1) in the intestine of both, wild-type nematodes and mutant animals lacking intestinal gut granules (glo1-mutants). DHE-enriched intestinal organelles of glo1-mutants were decorated with GFPrme8, a marker for early endosomes. No co-localization was found......, dehydroergosterol (DHE) in the genetically tractable model organism Caenorhabditis elegans (C. elegans). DHE is structurally very similar to cholesterol and ergosterol, two sterols used by the sterol-auxotroph nematode. We developed a new computational method measuring fluorophore bleaching kinetics at every pixel...... with a lysosomal marker, GFP-LMP1. Our new methods hold great promise for further studies on endosomal sterol transport in C. elegans....

  11. Local bleaching thresholds established by remote sensing techniques vary among reefs with deviating bleaching patterns during the 2012 event in the Arabian/Persian Gulf.

    Science.gov (United States)

    Shuail, Dawood; Wiedenmann, Jörg; D'Angelo, Cecilia; Baird, Andrew H; Pratchett, Morgan S; Riegl, Bernhard; Burt, John A; Petrov, Peter; Amos, Carl

    2016-04-30

    A severe bleaching event affected coral communities off the coast of Abu Dhabi, UAE in August/September, 2012. In Saadiyat and Ras Ghanada reefs ~40% of the corals showed signs of bleaching. In contrast, only 15% of the corals were affected on Delma reef. Bleaching threshold temperatures for these sites were established using remotely sensed sea surface temperature (SST) data recorded by MODIS-Aqua. The calculated threshold temperatures varied between locations (34.48 °C, 34.55 °C, 35.05 °C), resulting in site-specific deviations in the numbers of days during which these thresholds were exceeded. Hence, the less severe bleaching of Delma reef might be explained by the lower relative heat stress experienced by this coral community. However, the dominance of Porites spp. that is associated with the long-term exposure of Delma reef to elevated temperatures, as well as the more pristine setting may have additionally contributed to the higher coral bleaching threshold for this site.

  12. The effect of two bleaching agents on the phosphate concentration of the enamel evaluated by Raman spectroscopy: An ex vivo study

    Directory of Open Access Journals (Sweden)

    Sokkalingam Mothilal Venkatesan

    2012-01-01

    Full Text Available Aim : The aim of this ex vivo study was to evaluate the effect of in-office bleaching agents,-35% and 38% hydrogen peroxide containing bleaching agents, on the phosphate concentration of the enamel evaluated by Raman spectroscopy. Materials and Methods : Forty noncarious, craze-free human maxillary incisors, extracted for periodontal reasons, were used in this study. Baseline Raman spectra from each specimen were obtained before the application of the bleaching agent to assess the phosphate content present in the teeth. The teeth were divided into two groups: Group A - bleached with pola office bleach (35% hydrogen peroxide, potassium nitrate (light activated. Group B - bleached with opalescence Xtra bleach (38% hydrogen peroxide potassium nitrate and fluoride (chemical activated. After the bleaching procedure, the treated specimens were taken to obtain Raman spectra to assess the phosphate loss after bleaching treatment. Results : The results showed that the chemically activated bleaching agent showed less phosphate loss when compared with the light activated bleaching agent. Conclusion : Within the limitations of this study, it can be concluded that the chemically activated bleaching agent showed minimal phosphate loss when compared to light activated bleaching agent. The chemically activated bleaching agent was better than the light activated bleaching agent when values were evaluated statistically.

  13. Optical Emission Spectroscopy of an Atmospheric Pressure Plasma Jet During Tooth Bleaching Gel Treatment.

    Science.gov (United States)

    Šantak, Vedran; Zaplotnik, Rok; Tarle, Zrinka; Milošević, Slobodan

    2015-11-01

    Optical emission spectroscopy was performed during atmospheric pressure plasma needle helium jet treatment of various tooth-bleaching gels. When the gel sample was inserted under the plasma plume, the intensity of all the spectral features increased approximately two times near the plasma needle tip and up to two orders of magnitude near the sample surface. The color change of the hydroxylapatite pastille treated with bleaching gels in conjunction with the atmospheric pressure plasma jet was found to be in correlation with the intensity of OH emission band (309 nm). Using argon as an additive to helium flow (2 L/min), a linear increase (up to four times) of OH intensity and, consequently, whitening (up to 10%) of the pastilles was achieved. An atmospheric pressure plasma jet activates bleaching gel, accelerates OH production, and accelerates tooth bleaching (up to six times faster).

  14. A study on the recovery of Tobago's coral reefs following the 2010 mass bleaching event.

    Science.gov (United States)

    Buglass, Salome; Donner, Simon D; Alemu I, Jahson B

    2016-03-15

    In 2010, severe coral bleaching was observed across the southeastern Caribbean, including the island of Tobago, where coral reefs are subject to sedimentation and high nutrient levels from terrestrial runoff. Here we examine changes in corals' colony size distributions over time (2010-2013), juvenile abundances and sedimentation rates for sites across Tobago following the 2010 bleaching event. The results indicated that since pre-bleaching coral cover was already low due to local factors and past disturbance, the 2010 event affected only particular susceptible species' population size structure and increased the proportion of small sized colonies. The low density of juveniles (mean of 5.4±6.3 juveniles/m(-2)) suggests that Tobago's reefs already experienced limited recruitment, especially of large broadcasting species. The juvenile distribution and the response of individual species to the bleaching event support the notion that Caribbean reefs are becoming dominated by weedy non-framework building taxa which are more resilient to disturbances.

  15. Prediction of Coral Bleaching in the Florida Keys Using Remotely Sensed Data

    Science.gov (United States)

    Coral bleaching has been attributed to extremes or stressful synergy in several physical variables of the coral habitat. Of particular concern have been temperature, ultraviolet radiation, and photosynthetically available radiation. Satellite observing systems allow synoptic-sca...

  16. Active radiation hardening of Tm-doped silica fiber based on pump bleaching.

    Science.gov (United States)

    Xing, Ying-bin; Zhao, Nan; Liao, Lei; Wang, Yi-bo; Li, Hai-qing; Peng, Jing-gang; Yang, Lv-yun; Dai, Neng-li; Li, Jin-yan

    2015-09-21

    Tm-doped fiber laser or amplifier can be applied in varied adverse environments. In this work, we demonstrate the pump bleaching of Tm-doped silica fiber with 793nm pump source under gamma-ray irradiation in the range 50Gy-675Gy. The recovery time, the fiber slope efficiency and the fiber cladding absorption spectra after irradiation and bleaching have been measured. It is found that the recovery time and radiation induce absorption are positively associated with doses, however, the fiber slope efficiency of irradiated TDF and bleached TDF are both negatively correlated with doses. Based on the simulation of the fiber core temperature, the probable mechanism of pump bleaching is also discussed.

  17. SIMULTANEOUS DETERMINATION OF CHLORINE DIOXIDE AND HYPOCHLOROUS ACID IN BLEACHING SYSTEM

    Directory of Open Access Journals (Sweden)

    Qiang Wang

    2011-04-01

    Full Text Available This study has demonstrated a rapid spectroscopic method for the determination of chlorine dioxide and hypochlorous acid concentrations in the pulp bleaching processes. It was found that chlorine dioxide and hypochlorous acid have an isosbestic wavelength of 295 nm. The soluble lignin in such a system is the main interference, but can be corrected by determining the absorbances at 295 nm, 380 nm, and 480 nm. Thus, based on the spectroscopic measurements at 295 nm (the isosbestic point wavelength for chlorine dioxide and hypochlorous acid, 380 nm (absorbance wavelength of chlorine dioxide and 480 nm (the acid soluble lignin absorbance wavelength, the chlorine dioxide and hypochlorous acid concentrations in the bleaching process can be quantified. However, hypochlorous acid was not detected in the real bleaching effluent for its low content. The present method is simple, rapid, accurate, and has the potential for on-line monitoring of the chlorine dioxide bleaching process.

  18. NOAA's Coral Reef Conservation Program: 2016 Projects Monitoring the Effects of Thermal Stress on Coral Bleaching

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Climate change impacts have been identified as one of the greatest global threats to coral reef ecosystems. As temperature rise, mass bleaching, and infectious...

  19. High Resolution Imagery of Keppel Island Coral Reef Systems Prior to and During Suspected Bleaching Events

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is a collection of imagery of Keppel Island coral reef systems. They are pairs of imagery where one image was acquired during a suspected bleaching...

  20. Continued post-bleaching decline and changed benthic community of a Kenyan coral reef.

    Science.gov (United States)

    Lambo, A L; Ormond, R F G

    2006-12-01

    During the global coral bleaching event of 1997/1998 Kenyan reefs experienced between 50% and 90% coral mortality, with coral cover at Malindi being reduced from 35-45% (pre-bleaching) to 10-20%. Even before this event there was concern that these reefs were being impacted by increased sediment loads from the nearby Sabaki River. Here we report that since 1998 coral cover has declined yet further with, in 2004, means of 5.1% being recorded at North Reef (within the non-fished Malindi Marine National Park) and 2.3% on Leopard Reef (within the fished Marine Reserve). Prior to bleaching 55 coral genera were recorded from the area, currently we find only 23. Meanwhile algal cover, especially the calcareous green alga Halimeda, has increased, and on Leopard Reef is twice that on North Reef. Taken with the evidence of previous studies, these data suggest a combined impact of coral bleaching with sedimentation and fishing.

  1. Formalising a mechanistic linkage between heterotrophic feeding and thermal bleaching resistance

    Science.gov (United States)

    Wooldridge, Scott A.

    2014-12-01

    In this paper, I utilise the CO2 (sink) limitation model of coral bleaching to propose a new biochemical framework that explains how certain (well-adapted) coral species can utilise heterotrophic carbon acquisition to combat the damaging algal photoinhibition response sequence that underpins thermal bleaching, thereby increasing thermal bleaching resistance. This mechanistic linkage helps to clarify a number of previously challenging experimental responses arising from feeding (versus starved) temperature stress experiments, and isotope labelling (tracer) experiments with heterotrophic carbon sources (e.g., zooplankton). In an era of rapidly warming surface ocean temperatures, the conferred fitness benefits arising from such a mechanistic linkage are considerable. Yet, various ecological constraints are outlined which caution against the ultimate benefit of the mechanism for raising bleaching thresholds at the coral community (reef) scale. Future experiments are suggested that can strengthen these proposed arguments.

  2. Preliminary study of a novel in-office bleaching therapy modified with a casein phosphopeptide-amorphous calcium phosphate.

    Science.gov (United States)

    Borges, Boniek Castillo Dutra; Pinheiro, Mônica Heloisa Morais; Feitosa, Diala Aretha De Sousa; Correia, Tereza Cristina; Braz, Rodivan; Montes, Marcos Antônio Japiassú Resende; Pinheiro, Isauremi Vieira De Assunção

    2012-11-01

    Although in-office bleaching has been proven successful for bleaching teeth, controversy exists from morphological alterations in enamel morphology due to mineral loss and tooth sensitivity. This preliminary study aimed to evaluate the efficacy of a novel in-office tooth bleaching technique modified with a casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI paste-MI) and its effect on the enamel morphology and tooth sensitivity. Three patients received a 35% hydrogen peroxide (Whiteness HP-HP) dental bleaching system. HP was prepared and applied on the teeth on one of the hemiarches, whilst teeth on the other hemiarch were bleached with a mixture of HP and MI. Tooth color, epoxy resin replicas, and sensitivity levels were evaluated in the upper incisors. The results were analyzed descriptively. Right and left incisors showed similar color change after bleaching. Incisors bleached with the mixture of HP and MI presented unaltered enamel surfaces and lower sensitivity levels. The currently tested tooth bleaching technique did not reduce the gel effectiveness while decreasing hypersensitivity levels and protecting the enamel against surface alterations caused by the high-concentration bleaching peroxide tested. The concomitant use of MI Paste and high-concentration hydrogen peroxide might be a successful method for decreasing tooth sensitivity and limiting changes in the enamel morphology during in-office bleaching.

  3. Short-term coral bleaching is not recorded by skeletal boron isotopes.

    Directory of Open Access Journals (Sweden)

    Verena Schoepf

    Full Text Available Coral skeletal boron isotopes have been established as a proxy for seawater pH, yet it remains unclear if and how this proxy is affected by seawater temperature. Specifically, it has never been directly tested whether coral bleaching caused by high water temperatures influences coral boron isotopes. Here we report the results from a controlled bleaching experiment conducted on the Caribbean corals Porites divaricata, Porites astreoides, and Orbicella faveolata. Stable boron (δ11B, carbon (δ13C, oxygen (δ18O isotopes, Sr/Ca, Mg/Ca, U/Ca, and Ba/Ca ratios, as well as chlorophyll a concentrations and calcification rates were measured on coral skeletal material corresponding to the period during and immediately after the elevated temperature treatment and again after 6 weeks of recovery on the reef. We show that under these conditions, coral bleaching did not affect the boron isotopic signature in any coral species tested, despite significant changes in coral physiology. This contradicts published findings from coral cores, where significant decreases in boron isotopes were interpreted as corresponding to times of known mass bleaching events. In contrast, δ13C and δ18O exhibited major enrichment corresponding to decreases in calcification rates associated with bleaching. Sr/Ca of bleached corals did not consistently record the 1.2°C difference in seawater temperature during the bleaching treatment, or alternatively show a consistent increase due to impaired photosynthesis and calcification. Mg/Ca, U/Ca, and Ba/Ca were affected by coral bleaching in some of the coral species, but the observed patterns could not be satisfactorily explained by temperature dependence or changes in coral physiology. This demonstrates that coral boron isotopes do not record short-term bleaching events, and therefore cannot be used as a proxy for past bleaching events. The robustness of coral boron isotopes to changes in coral physiology, however, suggests that

  4. Short-term coral bleaching is not recorded by skeletal boron isotopes.

    Science.gov (United States)

    Schoepf, Verena; McCulloch, Malcolm T; Warner, Mark E; Levas, Stephen J; Matsui, Yohei; Aschaffenburg, Matthew D; Grottoli, Andréa G

    2014-01-01

    Coral skeletal boron isotopes have been established as a proxy for seawater pH, yet it remains unclear if and how this proxy is affected by seawater temperature. Specifically, it has never been directly tested whether coral bleaching caused by high water temperatures influences coral boron isotopes. Here we report the results from a controlled bleaching experiment conducted on the Caribbean corals Porites divaricata, Porites astreoides, and Orbicella faveolata. Stable boron (δ11B), carbon (δ13C), oxygen (δ18O) isotopes, Sr/Ca, Mg/Ca, U/Ca, and Ba/Ca ratios, as well as chlorophyll a concentrations and calcification rates were measured on coral skeletal material corresponding to the period during and immediately after the elevated temperature treatment and again after 6 weeks of recovery on the reef. We show that under these conditions, coral bleaching did not affect the boron isotopic signature in any coral species tested, despite significant changes in coral physiology. This contradicts published findings from coral cores, where significant decreases in boron isotopes were interpreted as corresponding to times of known mass bleaching events. In contrast, δ13C and δ18O exhibited major enrichment corresponding to decreases in calcification rates associated with bleaching. Sr/Ca of bleached corals did not consistently record the 1.2°C difference in seawater temperature during the bleaching treatment, or alternatively show a consistent increase due to impaired photosynthesis and calcification. Mg/Ca, U/Ca, and Ba/Ca were affected by coral bleaching in some of the coral species, but the observed patterns could not be satisfactorily explained by temperature dependence or changes in coral physiology. This demonstrates that coral boron isotopes do not record short-term bleaching events, and therefore cannot be used as a proxy for past bleaching events. The robustness of coral boron isotopes to changes in coral physiology, however, suggests that reconstruction of

  5. Short-Term Coral Bleaching Is Not Recorded by Skeletal Boron Isotopes

    Science.gov (United States)

    Schoepf, Verena; McCulloch, Malcolm T.; Warner, Mark E.; Levas, Stephen J.; Matsui, Yohei; Aschaffenburg, Matthew D.; Grottoli, Andréa G.

    2014-01-01

    Coral skeletal boron isotopes have been established as a proxy for seawater pH, yet it remains unclear if and how this proxy is affected by seawater temperature. Specifically, it has never been directly tested whether coral bleaching caused by high water temperatures influences coral boron isotopes. Here we report the results from a controlled bleaching experiment conducted on the Caribbean corals Porites divaricata, Porites astreoides, and Orbicella faveolata. Stable boron (δ11B), carbon (δ13C), oxygen (δ18O) isotopes, Sr/Ca, Mg/Ca, U/Ca, and Ba/Ca ratios, as well as chlorophyll a concentrations and calcification rates were measured on coral skeletal material corresponding to the period during and immediately after the elevated temperature treatment and again after 6 weeks of recovery on the reef. We show that under these conditions, coral bleaching did not affect the boron isotopic signature in any coral species tested, despite significant changes in coral physiology. This contradicts published findings from coral cores, where significant decreases in boron isotopes were interpreted as corresponding to times of known mass bleaching events. In contrast, δ13C and δ18O exhibited major enrichment corresponding to decreases in calcification rates associated with bleaching. Sr/Ca of bleached corals did not consistently record the 1.2°C difference in seawater temperature during the bleaching treatment, or alternatively show a consistent increase due to impaired photosynthesis and calcification. Mg/Ca, U/Ca, and Ba/Ca were affected by coral bleaching in some of the coral species, but the observed patterns could not be satisfactorily explained by temperature dependence or changes in coral physiology. This demonstrates that coral boron isotopes do not record short-term bleaching events, and therefore cannot be used as a proxy for past bleaching events. The robustness of coral boron isotopes to changes in coral physiology, however, suggests that reconstruction of

  6. Effect of casein phosphopeptide-amorphous calcium phosphate on the flexural strength of enamel-dentin complex following extracoronal bleaching

    Directory of Open Access Journals (Sweden)

    Diatri Nari Ratih

    2015-03-01

    Full Text Available Background: Bleaching can affect the mechanical properties of enamel-dentin complex, such as flexural strength. Casein phosphopeptide-amorphus calcium phosphate (CPP-ACP is often used following bleaching treatment to reduce hypersensitivity and to increase demineralization of tooth. Purpose: The purpose of the study was to investigate the effect of CPP-ACP on the flexural strength of enamel-dentin complex following extracoronal bleaching. Methods: Forty-eight enamel-dentin plates (size 8 x 2 x 3 mm were randomly assigned into 6 groups, each consisted of 8 samples. Group 1, no bleaching and immersed in artificial saliva. Group 2, no bleaching, CPP-ACP application only. Group 3, bleaching using 15% carbamide peroxide. Group 4, similar to group 3, except application of CPP-ACP for the times between bleaching. Group 5, bleaching with 40% hydrogen peroxide. Group 6, similar to group 5, except application of CPP-ACP for the times between bleaching. Flexural strength of each enamel-dentin plate was tested by threepoint bending test using universal testing machine. Results: The results showed that 15% carbamide peroxide and 40% hydrogen peroxide significantly reduced flexural strength of enamel-dentin (216.25±26.44 MPa and 206.67±32.07 MPa respectively. Conversely, application of CPP-ACP following both bleachings increased flexural strength (266.75± 28.27MPa and 254.58±36.59 MPa respectively. A two-way Anova revealed that extracoronal bleaching agents significantly reduced flexural strength (p<0.05. Conclusion: Extracoronal bleaching agents reduce flexural strength, whereas application of CPP-ACP following bleaching either with 15% carbamide peroxide or 40% hydrogen peroxide can increase the flexural strength of enamel-dentin complex.

  7. Evaluation of an experimental rat model for comparative studies of bleaching agents

    Science.gov (United States)

    CINTRA, Luciano Tavares Angelo; BENETTI, Francine; FERREIRA, Luciana Louzada; RAHAL, Vanessa; ERVOLINO, Edilson; JACINTO, Rogério de Castilho; GOMES, João Eduardo; BRISO, André Luiz Fraga

    2016-01-01

    ABSTRACT Dental materials in general are tested in different animal models prior to the clinical use in humans, except for bleaching agents. Objectives To evaluate an experimental rat model for comparative studies of bleaching agents, by investigating the influence of different concentrations and application times of H2O2 gel in the pulp tissue during in-office bleaching of rats’ vital teeth. Material and Methods The right and left maxillary molars of 50 Wistar rats were bleached with 20% and 35% H2O2 gels, respectively, for 5, 10, 15, 30, or 45 min (n=10 rats/group). Ten animals were untreated (control). The rats were killed after 2 or 30 days, and the maxillae were examined by light microscopy. Inflammation was evaluated through histomorphometric analysis with inflammatory cell count in the coronal and radicular thirds of the pulp. Fibroblasts were also counted. Scores were attributed to odontoblastic layer and vascular changes. Tertiary dentin area and pulp chamber central area were measured histomorphometrically. Data were compared by analysis of variance and Kruskal-Wallis test (p<0.05). Results After 2 days, the amount of inflammatory cells increased in the coronal pulp occlusal third up to the 15-min application groups of each bleaching gel. In the groups exposed to each concentration for 30 and 45 min, the number of inflammatory cells decreased along with the appearance of necrotic areas. After 30 days, reduction on the pulp chamber central area and enlargement of the tertiary dentin area were observed, without the detection of inflammation areas. Conclusion The rat model of extracoronal bleaching showed to be adequate for studies of bleaching protocols, as it was possible to observe alterations in the pulp tissues and tooth structure caused by different concentrations and application periods of bleaching agents. PMID:27119766

  8. The effect of baking soda when applied to bleached enamel prior to restorative treatment.

    Science.gov (United States)

    Tostes, Bhenya Ottoni; Mondelli, Rafael Francisco Lia; Lima-Arsati, Ynara Bosco de Oliveira; Rodrigues, Jose Augusto; Costa, Leonardo Cesar

    2013-08-01

    This in vitro study evaluated the effect of 10% baking soda solution and sodium bicarbonate powder (applied with jets) when applied to bleached enamel prior to restorative treatment. The surfaces of 40 bovine incisors were flattened and divided into 5 groups (n = 8): Group B (bleached and restored, negative control), Group W (bleached, stored in distilled water for 7 days, and restored), Group BSJ (bleached, abraded with baking soda jet for 1 min, and restored), Group BSS (bleached, application of 10% baking soda solution for 5 min, and restored), and Group R (restored, without bleaching, positive control). The samples were bleached in 1 session with 3 applications of 35% HP-based gel and activated with a LED appliance for 9 min each. Resin composite cylinders (2 mm height and 0.8 mm diameter) were made on the enamel surface after the acid etching and a conventional 1-step single vial adhesive application was performed. After storage in distilled water (37 ± 1°C, 24 hr), the microshear bond test was performed (1 mm/min). ANOVA and Tukey tests were applied to compare the results. The mean results of these tests showed that Groups W, BBS, and R were not statistically different. These groups also indicated a higher bond strength when compared with Groups B and BSJ. The application of 10% baking soda solution for 5 min may be an alternative pre-restorative treatment for bleached enamel, but further studies are needed to consider whether or not this treatment may be effectively used in clinical practice.

  9. Coral bleaching under unconventional scenarios of climate warming and ocean acidification

    Science.gov (United States)

    Kwiatkowski, Lester; Cox, Peter; Halloran, Paul R.; Mumby, Peter J.; Wiltshire, Andy J.

    2015-08-01

    Elevated sea surface temperatures have been shown to cause mass coral bleaching. Widespread bleaching, affecting >90% of global coral reefs and causing coral degradation, has been projected to occur by 2050 under all climate forcing pathways adopted by the IPCC for use within the Fifth Assessment Report. These pathways include an extremely ambitious pathway aimed to limit global mean temperature rise to 2 °C (ref. ; Representative Concentration Pathway 2.6--RCP2.6), which assumes full participation in emissions reductions by all countries, and even the possibility of negative emissions. The conclusions drawn from this body of work, which applied widely used algorithms to estimate coral bleaching, are that we must either accept that the loss of a large percentage of the world’s coral reefs is inevitable, or consider technological solutions to buy those reefs time until atmospheric CO2 concentrations can be reduced. Here we analyse the potential for geoengineering, through stratospheric aerosol-based solar radiation management (SRM), to reduce the extent of global coral bleaching relative to ambitious climate mitigation. Exploring the common criticism of geoengineering--that ocean acidification and its impacts will continue unabated--we focus on the sensitivity of results to the aragonite saturation state dependence of bleaching. We do not, however, address the additional detrimental impacts of ocean acidification on processes such as coral calcification that will further determine the benefit to corals of any SRM-based scenario. Despite the sensitivity of thermal bleaching thresholds to ocean acidification being uncertain, stabilizing radiative forcing at 2020 levels through SRM reduces the risk of global bleaching relative to RCP2.6 under all acidification-bleaching relationships analysed.

  10. Evaluation of an experimental rat model for comparative studies of bleaching agents

    Directory of Open Access Journals (Sweden)

    Luciano Tavares Angelo Cintra

    2016-02-01

    Full Text Available ABSTRACT Dental materials, in general, are tested in different animal models prior to their clinical use in humans, except for bleaching agents. Objectives To evaluate an experimental rat model for comparative studies of bleaching agents by investigating the influence of different concentrations and application times of H2O2 gel in the pulp tissue during in-office bleaching of rats’ vital teeth. Material and methods The right and left maxillary molars of 50 Wistar rats were bleached with 20% and 35% H2O2 gels, respectively, for 5, 10, 15, 30, or 45 min (n=10 rats/group. Ten animals (control were untreated. The rats were killed after 2 or 30 days, and the maxillae were examined by light microscopy. Inflammation was evaluated by histomorphometric analysis with inflammatory cell counting in the coronal and radicular thirds of the pulp. The counting of fibroblasts was also performed. Scores were attributed to the odontoblastic layer and to vascular changes. The tertiary dentin area and the pulp chamber central area were histomorphometrically measured. Data were compared by the analysis of variance and the Kruskal-Wallis test (p<0.05. Results After 2 days, the amount of inflammatory cells increased in the occlusal third of the coronal pulp until the time of 15 min for both concentrations of bleaching gels. In 30 and 45 min groups of each concentration, the number of inflammatory cells decreased along with the appearance of necrotic areas. After 30 days, a reduction in the pulp chamber central area and an enlargement of tertiary dentin area were observed without the detection of inflammation areas. Conclusion The rat model of extra coronal bleaching showed to be adequate for bleaching protocols studies, as it was possible to observe alterations in the pulp tissues and in the tooth structure caused by different concentrations and periods of application of bleaching agents.

  11. Influence of pH, bleaching agents, and acid etching on surface wear of bovine enamel

    Directory of Open Access Journals (Sweden)

    Ana Flávia Soares

    2016-02-01

    Full Text Available ABSTRACT Development of new materials for tooth bleaching justifies the need for studies to evaluate the changes in the enamel surface caused by different bleaching protocols. Objective The aim of this study was to evaluate the bovine dental enamel wear in function of different bleaching gel protocols, acid etching and pH variation. Material and Methods Sixty fragments of bovine teeth were cut, obtaining a control and test areas. In the test area, one half received etching followed by a bleaching gel application, and the other half, only the bleaching gel. The fragments were randomly divided into six groups (n=10, each one received one bleaching session with five hydrogen peroxide gel applications of 8 min, activated with hybrid light, diode laser/blue LED (HL or diode laser/violet LED (VHL (experimental: Control (C; 35% Total Blanc Office (TBO35HL; 35% Lase Peroxide Sensy (LPS35HL; 25% Lase Peroxide Sensy II (LPS25HL; 15% Lase Peroxide Lite (LPL15HL; and 10% hydrogen peroxide (experimental (EXP10VHL. pH values were determined by a pHmeter at the initial and final time periods. Specimens were stored, subjected to simulated brushing cycles, and the superficial wear was determined (μm. ANOVA and Tukey´s tests were applied (α=0.05. Results The pH showed a slight decrease, except for Group LPL15HL. Group LPS25HL showed the highest degree of wear, with and without etching. Conclusion There was a decrease from the initial to the final pH. Different bleaching gels were able to increase the surface wear values after simulated brushing. Acid etching before bleaching increased surface wear values in all groups.

  12. A comparison of chlorinated organic material produced by chlorine and chlorine dioxide bleaching

    Energy Technology Data Exchange (ETDEWEB)

    McKaque, A.B.; Reeve, D.W. [Univ. of Toronto (Canada)

    1995-12-31

    Chlorine and chlorine dioxide react differently with pulp during bleaching and produce different types of organic by-products. The main differences are the large reduction in the amount of AOX (adsorbable organic halogen) in the effluent and EOX (extractable organic halogen) in the pulp. This talk reviews the differences in the amounts and types of chlorinated organic by-products produced by the two different bleaching agents.

  13. Effect of postoperative bleaching on microleakage of etch-and-rinse and self-etch adhesives

    Directory of Open Access Journals (Sweden)

    Vajihesadat Mortazavi

    2011-01-01

    Full Text Available Background: Bleaching the discoloured teeth may affect the tooth/composite interface. The aim of this in vitro experimental study was to evaluate the effect of vital tooth bleaching on microleakage of existent class V composite resin restorations bonded with three dental bonding agents. Methods : Class V cavities were prepared on buccal surfaces of 72 intact, extracted human anterior teeth with gingival margins in dentin and occlusal margins in enamel, and randomly divided into 3 groups. Cavities in the three groups were treated with Scotch bond Multi-Purpose, a total etch system and Prompt L-Pop and iBond, two self-etch adhesives. All teeth were restored with Z250 resin composite material and thermo-cycled. Each group was equally divided into the control and the bleached subgroups (n = 12. The bleached subgroups were bleached with 15% carbamide peroxide gel for 8 hours a day for 15 days. Microleakage scores were evaluated on the incisal and cervical walls. Data were analyzed using Kruskal-Wallis, Mann-Whitney and Bonferroni post-hoc tests (α = 0.05. Results: Bleaching with carbamide peroxide gel significantly increased the microleakage of composite restorations in Prompt L-Pop group at dentinal walls (P = 0.001. Bleaching had no effect on microleakage of restorations in the Scotch bond Multi-Purpose and iBond groups. Conclusion: Vital tooth bleaching with carbamide peroxide gel has an adverse effect on marginal seal of dentinal walls of existent composite resin restorations bonded with prompt L-Pop self-etch adhesive.

  14. The effect of remin pro and MI paste plus on bleached enamel surface roughness.

    Directory of Open Access Journals (Sweden)

    Haleh Heshmat

    2014-04-01

    Full Text Available The growing demand for enhanced esthetic appearance has led to great developments in bleaching products. The exposure of hard tissues of the tooth to bleaching agents can affect the roughness of the enamel surface. The freshly bleached enamel surface exposed to various surface treatments such as fluoride and other remineralizing agents have been assessed in this study. The aim of this experimental study was to compare the effect of Casein Phosphopeptide-Amorphous Calcium Phosphate with Fluoride (MI Paste Plus and Remin Pro on the enamel surface roughness after bleaching.Thirty enamel samples of sound human permanent molars were prepared for this study. After initial roughness measurement with profilometer, the samples were exposed to 37% carbamide peroxide bleaching agent 20 minutes twice, and randomly divided into three groups of ten. In group 1, a CPP-ACPF containing paste (MI Paste Plus and in group 2, Remin Pro were applied to the teeth during a 15 day period for 5 minutes, twice a day. Samples of group 3 (control were immersed in artificial saliva for 15 days. The roughness of all samples were measured at the beginning, after bleaching and after the study intervention and statistically analyzed.The surface roughness significantly increased in all groups following bleaching, and then it showed a decrease after application of both Remin Pro and CPP-ACPF in comparison to using bleaching agent (P0.05.There was no difference between surface roughness of MI Paste Plus and Remin Pro groups. Also the surface roughness was decreased compared to the initial enamel surface roughness.

  15. Effects of temperature,hypoxia, ammonia and nitrate on the bleaching among three coral species

    Institute of Scientific and Technical Information of China (English)

    ZHU Baohua; WANG Guangce; HUANG Bo; C. K. Tseng

    2004-01-01

    Coral bleaching, which is defined as the loss of colour in corals due to the loss of their symbiotic algae (commonly called zooxanthellae) or pigments or both, is occurring globally at increasing rates, and its harm becomes more and more serious during these two decades. The significance of these bleaching events to the health of coral reef ecosystems is extreme, as bleached corals exhibited high mortality, reduced fecundity and productivity and increased susceptibility to diseases. This decreased coral fitness is easily to lead to reef degradation and ultimately to the breakdown of the coral reef ecosystems. Recently, the reasons leading to coral bleaching are thought to be as follows: too high or too low temperature, excess ultraviolet exposure, heavy metal pollution, cyanide poison and seasonal cycle. To date there has been little knowledge of whether mariculture can result in coral bleaching and which substance has the worst effect on corals. And no research was conducted on the effect of hypoxia on corals. To address these questions, effects of temperature, hypoxia, ammonia and nitrate on bleaching of three coral species were studied through examination of morphology and the measurement of the number of symbiotic algae of three coral species Acropora nobilis, Palythoa sp.and Alveopora verrilliana. Results showed that increase in temperature and decrease in dissolved oxygen could lead to increasing number of symbiotic algae and more serious bleaching. In addition, the concentration of 0.001 mmol/L ammonia or nitrate could increase significantly the expulsion of the symbiotic algae of the three coral species. Except for Acropora nobilis, the numbers of symbiotic algae of other two corals did not significantly increase with the increasing concentration of ammonia and nitrate. Furthermore, different hosts have different stress susceptibilities on coral bleaching.

  16. ALKALI DARKENING AND ITS RELATIONSHIP TO PEROXIDE BLEACHING OF MECHANICAL PULP

    Institute of Scientific and Technical Information of China (English)

    Zhibin He; Yonghao Ni; Eric Zhang

    2004-01-01

    The effect of alkalinity, transition metals and oxygen on alkali darkening of mechanical pulp, and its relations to subsequent peroxide bleaching were investigated. The chromophores generated under mild conditions of an alkaline treatment can be destroyed in a subsequent peroxide stage.Peroxide-resistant chromophores are generated only under severe conditions. The results also show that a short alkaline pretreatment can improve the performance of a peroxide bleaching stage.

  17. ALKALI DARKENING AND ITS RELATIONSHIP TO PEROXIDE BLEACHING OF MECHANICAL PULP

    Institute of Scientific and Technical Information of China (English)

    ZhibinHe; Yon2haoNi; EricZhang_

    2004-01-01

    The effect of alkalinity, transition metals and oxygen on alkali darkening of mechanical pulp, and its relations to subsequent peroxide bleaching were investigated. The chromophores generated under mild conditions of an alkaline treatment can be destroyed in a subsequent peroxide stage. Peroxide-resistant chromophores are generated only under severe conditions. The results also show that a short alkaline pretreatment can improve the performance of a peroxide bleaching stage.

  18. Understanding the Nature and Reactivity of Residual Lignin for Improved Pulping and Bleaching Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Yuan-Zong Lai

    2001-11-30

    One of the most formidable challenges in kraft pulping to produce bleached chemical pulps is how to effectively remove the last 5-10% of lignin while maintaining the fiber quality. To avoid a severe fiber degradation, kraft pulping is usually terminated in the 25-30 kappa number range and then followed by an elementally chlorine free (ECF) or a totally chlorine free (TCF) bleaching sequence to reduce the environmental impacts.

  19. Short-Term Coral Bleaching Is Not Recorded by Skeletal Boron Isotopes

    OpenAIRE

    Schoepf, Verena; McCulloch, Malcolm T.; Mark E. Warner; Levas, Stephen J.; Matsui,Yohei; Aschaffenburg, Matthew D.; Andréa G Grottoli

    2014-01-01

    Coral skeletal boron isotopes have been established as a proxy for seawater pH, yet it remains unclear if and how this proxy is affected by seawater temperature. Specifically, it has never been directly tested whether coral bleaching caused by high water temperatures influences coral boron isotopes. Here we report the results from a controlled bleaching experiment conducted on the Caribbean corals Porites divaricata, Porites astreoides, and Orbicella faveolata. Stable boron (δ11B), carbon (δ1...

  20. Clinical evaluation of a new bleaching product "Polanight" in a Japanese population.

    Science.gov (United States)

    Tsubura, Shuichi; Yamaguchi, Ryuji

    2005-09-01

    Home bleaching techniques have been applied as a safe and effective bleaching procedure. Many manufacturers are now marketing home tooth-bleaching products. The purpose of this study was to compare a new bleaching product, Polanight (PN) with a widely used home bleaching product, Opalescence (OP). Fifty-eight healthy Japanese volunteers of both sexes (18 to 47 years of age) were selected. Using a simultaneous split-mouth protocol, custom-made trays with PN and OP were applied to the maxillary right anterior teeth and left anterior teeth, respectively. The shades of the maxillary canine teeth were measured with a portable chromameter (Shade Eye Ex) at the first examination and at 4 weeks (after 2-week bleaching and 2-week rest). Tooth shade changes were analyzed using the Commission Internationale d'Eclairage (CIE) Lab units. Means of whiteness-blackness difference (DeltaL*), redness-greenness difference (Deltaa*), and yellowness-blueness difference (Deltab*) were 4.00, -1.28 and -7.53 for PN, and 2.54, -0.99, and -5.56 for OP, respectively. Means of color difference (DeltaE*) were 9.23 and 7.78 for PN and OP, respectively. Treatment with either agent demonstrated significant bleaching effects produced by the treatment. The new product, PN, showed significant differences in DeltaL* (P < 0.05) and Deltab* (P < 0.005), but not in the redness-greenness (a*) value when compared with OP. Bleaching with PN was considered more effective than that with OP in the young patient group and in the women.

  1. Influence of Coral Bleaching on the Fauna of Tutia Reef, Tanzania

    OpenAIRE

    Öhman, M.C.; Lindahl, U.; Schelten, C.K.

    1999-01-01

    In 1998, coral reefs of Tanzania were severely affected by bleaching. The coral mortality that followed caused a concern for coral reef degradation and overall resource depletion. In this study, we investigated coral bleaching effects on the coral reef fauna at Tutia Reef in Mafia Island Marine Park, Tanzania. Corals from adjacent reef patches of the species Acropora formosa were transplanted into plots, and reef structure and associated fish assemblages were examined before and after the ble...

  2. Bleaching of soda pulp of fibres of Musa textilis nee (abaca) with peracetic acid.

    Science.gov (United States)

    Jiménez, L; Ramos, E; De la Torre, M J; Pérez, I; Ferrer, J L

    2008-03-01

    In this work, we studied the influence of operational variables in the bleaching of soda pulp of Musa textilis nee (abaca) [viz. temperature (55-85 degrees C), bleaching time (30-150 min) and peracetic acid concentration oven dry pulp (0.5-4.5%)] on the kappa number and viscosity of the bleached pulp, as well as on the breaking length, burst index and brightness of paper sheets made from it. For this purpose, we used a central composite factorial design in order to identify the optimum operating conditions. In this way equations relating the dependent variables to the operational variables of the bleaching process were derived. These equations reproduce the dependent variables with errors less than 12% for all, except the viscosity which was predicted with errors less than 18%. Obtaining bleached pulp with the highest possible viscosity (1519 ml/g), and paper sheets with the maximum possible breaking length (6547 m) and burst index (5.00 kN/g), entails using a temperature of 55 degrees C, a peracetic acid concentration of 4.5% and a bleaching time of 150 min. This provides a brightness of 79.90%, which is only 6.53% lower than the maximum possible value (85.48%).

  3. Study of the hydrogen peroxide bleaching agent effects on bovine enamel using X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Ruda F.; Calazans, Fernanda S.; Miranda, Mauro S.; Santos, Ramon S.; Anjos, Marcelino J.; Assis, Joaquim T. [Universidade do Estado do Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    Hydrogen Peroxide's a bleaching agent capable of oxidizing a wide range of colored organic, causing discoloration and hence bleaching of the substrate, but some authors related the occurrence of side effects related to bleaching of the tooth structure, such as changes in morphology superficial. It was used 6 bovine incisors, each tooth was initially evaluated six times in different areas to obtain the count of elements phosphorus and calcium using X-Ray Fluorescence. The teeth were randomly divided in two groups: both groups were submitted to bleaching in office with hydrogen peroxide 38%, once a week during three weeks. Group 1 was stored in distilled water and group 2 in artificial saliva, between the sessions. The measurements were repeated every seven days before the bleaching treatment. Besides that, changes in mineral levels were always assessed in the same area and using the same procedure. It was observed that the bleaching was not able to demineralize the tooth enamel studied. (author)

  4. Bleaching induced tooth sensitivity: do the existing enamel craze lines increase sensitivity? A clinical study.

    Science.gov (United States)

    Özcan, Mutlu; Abdin, Sam; Sipahi, Cumhur

    2014-07-01

    The aim of this clinical study was to evaluate whether or not an association exists between the presence of enamel craze lines and the prevalence of tooth sensitivity (TS) after in-office bleaching. Subjects that met the inclusion criteria (N = 23) were screened to detect the existence of enamel craze lines. In total, 460 teeth were subjected to bleaching where 49% of them presented enamel craze lines. After bleaching (15% hydrogen peroxide), the subjects were asked to rate the level of TS by answering a self-administered questionnaire. The majority of subjects (91%) experienced TS at the first day of bleaching. The TS prevalence decreased gradually to 22% at second day, to 17% at third day, and to 9% at fourth day. After the fourth day, no subject reported TS. While 15% of teeth with craze lines presented TS, 11% of teeth with no craze lines also showed TS. A positive but weak correlation (r = 0.214) was found between the existence of enamel craze lines and TS. In this clinical study, higher incidence of TS was found with the use of 15% hydrogen peroxide bleaching agent compared to the previous studies. Patients who would undergo in-office bleaching should be informed that tooth sensitivity is a very often side effect but it may disappear within 1 week.

  5. Clinical trial of tooth desensitization prior to in-office bleaching.

    Science.gov (United States)

    Mehta, Deepak; Venkata, Suresh; Naganath, Meena; LingaReddy, Usha; Ishihata, Hiroshi; Finger, Werner J

    2013-10-01

    The aim of this clinical trial was to compare tooth sensitivity during and after bleaching with hydrogen peroxide gel following application of GLUMA Desensitizer PowerGel or placebo. Forty-six subjects with sound maxillary incisors and canines were enrolled. Tooth shades were determined by comparison with a Vitapan Classic Shade guide. GLUMA Desensitizer PowerGel and placebo were randomly applied to the labial surfaces of the left or right anterior teeth for 1 min, which were then rinsed and dried. Then, Opalescence Boost PF 40% gel was applied onto labial enamel for 15 min. Sensitivity scores [recorded on a 10-point visual-analog scale (VAS)] were determined before, at 5, 10, and 15 min during, and 1, 24, 48 h and 1 wk after, the bleaching treatment. Shades were determined postbleaching and after 1 wk. Prebleaching application of GLUMA Desensitizer PowerGel significantly reduced tooth sensitivity during and after bleaching when compared with treatment with placebo. The whitening effects immediately and 1 wk after bleaching were significant when compared with the prebleaching shades. In conclusion, tooth pretreatment with GLUMA Desensitizer PowerGel for 1 min prior to 15 min of in-office bleaching with 40% hydrogen peroxide gel was highly effective in reducing tooth sensitivity during and after bleaching.

  6. Coral recovery in the central Maldives archipelago since the last major mass-bleaching, in 1998.

    Science.gov (United States)

    Pisapia, C; Burn, D; Yoosuf, R; Najeeb, A; Anderson, K D; Pratchett, M S

    2016-10-03

    Increasing frequency and severity of disturbances is causing global degradation of coral reef ecosystems. This study examined temporal changes in live coral cover and coral composition in the central Maldives from 1997 to 2016, encompassing two bleaching events, a tsunami, and an outbreak of Acanthaster planci. We also examined the contemporary size structure for five dominant coral taxa (tabular Acropora, Acropora muricata, Acropora humilis, Pocillopora spp, and massive Porites). Total coral cover increased throughout the study period, with marked increases following the 1998 mass-bleaching. The relative abundance of key genera has changed through time, where Acropora and Pocillopora (which are highly susceptible to bleaching) were under-represented following 1998 mass-bleaching but increased until outbreaks of A. planci in 2015. The contemporary size-structure for all coral taxa was dominated by larger colonies with peaked distributions suggesting that recent disturbances had a disproportionate impact on smaller colonies, or that recruitment is currently limited. This may suggest that coral resilience has been compromised by recent disturbances, and further bleaching (expected in 2016) could lead to highly protracted recovery times. We showed that Maldivian reefs recovered following the 1998 mass-bleaching event, but it took up to a decade, and ongoing disturbances may be eroding reef resilience.

  7. Modeling patterns of coral bleaching at a remote Central Pacific atoll.

    Science.gov (United States)

    Williams, Gareth J; Knapp, Ingrid S; Maragos, James E; Davy, Simon K

    2010-09-01

    A mild bleaching event (9.2% prevalence) at Palmyra Atoll occurred in response to the 2009 ENSO, when mean water temperature reached 29.8-30.1 degrees C. Prevalence among both abundant and sparse taxa varied with no clear pattern in susceptibility relating to coral morphology. Seven taxon-specific models showed that turbidity exacerbated while prior exposure to higher background temperatures alleviated bleaching, with these predictors explaining an average 16.3% and 11.5% variation in prevalence patterns, respectively. Positive associations occurred between bleaching prevalence and both immediate temperature during the bleaching event (average 8.4% variation explained) and increased sand cover (average 3.7%). Despite these associations, mean unexplained variation in prevalence equalled 59%. Lower bleaching prevalence in areas experiencing higher background temperatures suggests acclimation to temperature stress among several coral genera, while WWII modifications may still be impacting the reefs via shoreline sediment re-distribution and increased turbidity, exacerbating coral bleaching susceptibility during periods of high temperature stress.

  8. A comparison between boat-based and diver-based methods for quantifying coral bleaching

    Science.gov (United States)

    Zawada, David G.; Ruzicka, Rob; Colella, Michael A.

    2015-01-01

    Recent increases in both the frequency and severity of coral bleaching events have spurred numerous surveys to quantify the immediate impacts and monitor the subsequent community response. Most of these efforts utilize conventional diver-based methods, which are inherently time-consuming, expensive, and limited in spatial scope unless they deploy large teams of scientifically-trained divers. In this study, we evaluated the effectiveness of the Along-Track Reef Imaging System (ATRIS), an automated image-acquisition technology, for assessing a moderate bleaching event that occurred in the summer of 2011 in the Florida Keys. More than 100,000 images were collected over 2.7 km of transects spanning four patch reefs in a 3-h period. In contrast, divers completed 18, 10-m long transects at nine patch reefs over a 5-day period. Corals were assigned to one of four categories: not bleached, pale, partially bleached, and bleached. The prevalence of bleaching estimated by ATRIS was comparable to the results obtained by divers, but only for corals > 41 cm in size. The coral size-threshold computed for ATRIS in this study was constrained by prevailing environmental conditions (turbidity and sea state) and, consequently, needs to be determined on a study-by-study basis. Both ATRIS and diver-based methods have innate strengths and weaknesses that must be weighed with respect to project goals.

  9. A strategic framework for responding to coral bleaching events in a changing climate.

    Science.gov (United States)

    Maynard, J A; Johnson, J E; Marshall, P A; Eakin, C M; Goby, G; Schuttenberg, H; Spillman, C M

    2009-07-01

    The frequency and severity of mass coral bleaching events are predicted to increase as sea temperatures continue to warm under a global regime of rising ocean temperatures. Bleaching events can be disastrous for coral reef ecosystems and, given the number of other stressors to reefs that result from human activities, there is widespread concern about their future. This article provides a strategic framework from the Great Barrier Reef to prepare for and respond to mass bleaching events. The framework presented has two main inter-related components: an early warning system and assessment and monitoring. Both include the need to proactively and consistently communicate information on environmental conditions and the level of bleaching severity to senior decision-makers, stakeholders, and the public. Managers, being the most timely and credible source of information on bleaching events, can facilitate the implementation of strategies that can give reefs the best chance to recover from bleaching and to withstand future disturbances. The proposed framework is readily transferable to other coral reef regions, and can easily be adapted by managers to local financial, technical, and human resources.

  10. A Strategic Framework for Responding to Coral Bleaching Events in a Changing Climate

    Science.gov (United States)

    Maynard, J. A.; Johnson, J. E.; Marshall, P. A.; Eakin, C. M.; Goby, G.; Schuttenberg, H.; Spillman, C. M.

    2009-07-01

    The frequency and severity of mass coral bleaching events are predicted to increase as sea temperatures continue to warm under a global regime of rising ocean temperatures. Bleaching events can be disastrous for coral reef ecosystems and, given the number of other stressors to reefs that result from human activities, there is widespread concern about their future. This article provides a strategic framework from the Great Barrier Reef to prepare for and respond to mass bleaching events. The framework presented has two main inter-related components: an early warning system and assessment and monitoring. Both include the need to proactively and consistently communicate information on environmental conditions and the level of bleaching severity to senior decision-makers, stakeholders, and the public. Managers, being the most timely and credible source of information on bleaching events, can facilitate the implementation of strategies that can give reefs the best chance to recover from bleaching and to withstand future disturbances. The proposed framework is readily transferable to other coral reef regions, and can easily be adapted by managers to local financial, technical, and human resources.

  11. Evaluation of the effects of conventional versus laser bleaching techniques on enamel microroughness.

    Science.gov (United States)

    Anaraki, Saeid Nemati; Shahabi, Sima; Chiniforush, Nasim; Nokhbatolfoghahaei, Hanieh; Assadian, Hadi; Yousefi, Bahareh

    2015-04-01

    Nowadays, bleaching of the teeth within the dental office is one of the most widespread techniques to correct tooth discoloration. Variability of the materials and techniques accompanied with the trend toward esthetic restorations with minimally invasive approaches are increasing. The use of laser in this regard has also been taken into consideration. The aim of this study was to evaluate the effects of in-office versus laser bleaching on surface roughness of enamel. Fifteen freshly extracted human molars were sectioned mesiodistally to produce 30 lingual and buccal enamel blocks. Samples were mounted in transparent acrylic resin blocks and polished before treatment. Samples were randomly assigned to laser bleaching (LB) and office bleaching (OB) groups (n = 15 each). Pretreatment evaluation of microroughness was carried out for all samples using profilometer. Samples were treated twice in the OB group with Opalescent Xtra Boost and in the LB group using a laser-activated gel. Microroughness was evaluated after bleaching in both groups. Data were analyzed using repeated measure ANOVA. Both methods increased enamel surface roughness. Microroughness changes were significantly different between the two groups (p  0.05), but there was no significant difference in pre- and post-treatment roughness evaluation in the LB group (p roughness increase in comparison with the conventional office bleaching procedure.

  12. Effect of two bleaching agents on enamel morphology: a SEM study

    Directory of Open Access Journals (Sweden)

    Ghavam M.

    2005-05-01

    Full Text Available Statement of Problem: Bleaching materials are able to change the surface morphology as well as mineral and organic content of tooth structure. Considering that bleaching is done for aesthetic purpose, awareness of the possible effect of these materials on hard tissue is important, because it may affect the restorative treatments. Purpose: The aim of this study was comparing the effect of two bleaching materials, Kimia and Ultradent both containing 35% H2O2, on tooth enamel by SEM. Materials and Methods: Five intact central incisors were cut into three sections vertically and each part was randomly divided into three groups. Group 1 (control, without any bleaching. Group 2, bleached with Kimia 35% H2O2. Group 3, bleached with Ultradent 35% H2O2. Each tooth served as its own control. Then the samples were observed by SEM with 250 and 500 magnifications. Results: In the control group some scratches and small white grains were observed which seems to be the result of mastication trauma and pumice powder. In the other groups, morphologic changes like increased surface roughness, deepening of cracks, rod exposure and presence of new cracks were observed. The two experimental materials did not differ in these regards. Conclusion: It seems that both studied materials have limited destructive effects on tooth enamel which seems to be of no clinical importance.

  13. Trace metal anomalies in bleached Porites coral at Meiji Reef, tropical South China Sea

    Science.gov (United States)

    Li, Shu; Yu, Kefu; Zhao, Jianxin; Feng, Yuexing; Chen, Tianran

    2017-01-01

    Coral bleaching has generally been recognized as the main reason for tropical coral reef degradation, but there are few long-term records of coral bleaching events. In this study, trace metals including chromium (Cr), copper (Cu), molybdenum (Mo), manganese (Mn), lead (Pb), tin (Sn), titanium (Ti), vanadium (V), and yttrium (Y), were analyzed in two Porites corals collected from Meiji Reef in the tropical South China Sea (SCS) to assess differences in trace metal concentrations in bleached compared with unbleached coral growth bands. Ti, V, Cr, and Mo generally showed irregular fluctuations in both corals. Bleached layers contained high concentrations of Mn, Cu, Sn, and Pb. Unbleached layers showed moderately high concentrations of Mn and Cu only. The different distribution of trace metals in Porites may be attributable to different selectivity on the basis of vital utility or toxicity. Ti, V, Cr, and Mo are discriminated against by both coral polyps and zooxanthellae, but Mn, Cu, Sn, and Pb are accumulated by zooxanthellae and only Mn and Cu are accumulated by polyps as essential elements. The marked increase in Cu, Mn, Pb, and Sn are associated with bleaching processes, including mucus secretion, tissue retraction, and zooxanthellae expulsion and occlusion. Variation in these trace elements within the coral skeleton can be used as potential tracers of short-lived bleaching events.

  14. COMPARISON OF ECF-LIGHT,TCF AND CEH BLEACHING OF NON-NOOD FIBERS

    Institute of Scientific and Technical Information of China (English)

    Thomas Greschik; Jiri Basta,Christian Blom; Huaiyu Zhan; Bingyun Li; Chenrong Qin

    2004-01-01

    A comparative evaluation of DQP, OQP and CEH bleaching of non-wood fibres has revealed that wheat straw, reed, bagasse and bamboo pulps can be bleached to brightness levels of just above 80% ISO,when applying an OQP bleaching sequence and to brightness levels of about 85% ISO when applying the DQP sequence using 10 - 15 kg/tp of ClO2 (aC1.),15 - 20 kg/tp of H2O2 together with 1 - 2 kg/tp of EDTA. The P.C. numbers of the DQP and OQP bleached pulps are much lower and the viscosity much higher than those of the CEH bleached pulps.Compared with CEH pulps, both the DQP and OQP pulps had better strength properties, particularly Tear Index. In spite of their higher final brightness levels,the DQP pulps show similar or better strength properties than the OQP pulps. A comparison of the CEH and DQP effluents showed that the DQP bleaching could reduce the pollution load (CODCDBOD5, SS) by 35 to 60% without the need for recirculation of any effluent streams. The AOX levels could be reduced by 87 to 93%.

  15. Efficacy of Detergent and Water Versus Bleach for the Disinfection of Direct Contact Ophthalmic Lenses

    Science.gov (United States)

    Abbey, Ashkan M.; Gregori, Ninel Z.; Surapaneni, Krishna; Miller, Darlene

    2014-01-01

    Purpose While manufacturers recommend cleaning ophthalmic lenses with detergent and water and then a specific disinfectant, disinfectants are rarely used in ophthalmic practices. The aim of this pilot study was to evaluate the efficacy of detergent and water versus bleach, a recommended disinfectant, to eliminate common ocular bacteria and viruses from ophthalmic lenses. Methods Three bacterial strains (Staphylococcus epidermidis, Corynebacterium straitum, and methicillin-resistant Staphylococcus aureus (MRSA) and two viral strains (adenovirus and herpes simplex virus (HSV) type-1) were individually inoculated to 20 gonioscopy and laser lenses. Lenses were washed with detergent and water and then disinfected with 10% bleach. All lenses were cultured after inoculation, after detergent and water, and after the bleach. Bacterial cultures in thioglycollate broth were observed for 3 weeks and viral cultures for 2 weeks. The presence of viruses was also detected by multiplex polymerase chain reaction (PCR). Results All 20 lenses inoculated with Staphylococcus epidermidis, Corynebacterium straitum, adenovirus, and HSV-1 showed growth after inoculation, but no growth after detergent/water and after the bleach. All lenses showed positive HSV and adenovirus PCR after inoculation and negative PCR after detergent/water and after bleach. All MRSA contaminated lenses showed growth after inoculation and no growth after detergent and water. However, one lens showed positive growth after bleach. Conclusions Cleaning with detergent and water appeared to effectively eliminate bacteria and viruses from the surface of contaminated ophthalmic lenses. Further studies are warranted to design practical disinfection protocols that minimize lens damage. PMID:24747806

  16. Improved microscopical detection of acid-fast bacilli by the modified bleach method in lymphnode aspirates

    Directory of Open Access Journals (Sweden)

    Annam Vamseedhar

    2009-07-01

    Full Text Available Objectives: To improve the smear microscopy for detection of acid-fast bacilli (AFB in fine needle aspiration cytology (FNAC of lymph node using the bleach method and also to compare this with cytological diagnosis and the conventional Ziehl-Neelsen (ZN method. Study Design: In 99 consecutive patients with clinical suspicion of tuberculosis (TB presenting with lymphadenopathy, FNACs were performed. Smears from the aspirates were processed for routine cytology and the conventional ZN method. The remaining material in the needle hub and/or the syringe was used for the bleach method. The significance of the bleach method over the conventional ZN method and cytology was analyzed using the χ2 test. Results: Of 99 aspirates, 93 were studied and the remaining six were excluded from the study due to diagnosis of malignancy in 4.04% (4/6 and inadequate aspiration in 2.02% (2/6. Among the 93 aspirates, 33.33% (31/93 were positive for AFB on conventional ZN method, 41.94% (39/93 were indicative of TB on cytology and the smear positivity increased to 63.44% (59/93 on bleach method. Conclusion: The bleach method is simple, inexpensive and potent disinfectant, also limiting the risk of laboratory-acquired infections. The implementation of the bleach method clearly improves microscopic detection and can be a useful contribution to routine cytology.

  17. An Effective Ostrich Oil Bleaching Technique Using Peroxide Value as an Indicator

    Directory of Open Access Journals (Sweden)

    Gan Seng Chiew

    2011-07-01

    Full Text Available Ostrich oil has been used extensively in the cosmetic and pharmaceutical industries. However, rancidity causes undesirable chemical changes in flavour, colour, odour and nutritional value. Bleaching is an important process in refining ostrich oil. Bleaching refers to the removal of certain minor constituents (colour pigments, free fatty acid, peroxides, odour and non-fatty materials from crude fats and oils to yield purified glycerides. There is a need to optimize the bleaching process of crude ostrich oil prior to its use for therapeutic purposes. The objective of our study was to establish an effective method to bleach ostrich oil using peroxide value as an indicator of refinement. In our study, we showed that natural earth clay was better than bentonite and acid-activated clay to bleach ostrich oil. It was also found that 1 hour incubation at a 150 °C was suitable to lower peroxide value by 90%. In addition, the nitrogen trap technique in the bleaching process was as effective as the continuous nitrogen flow technique and as such would be the recommended technique due to its cost effectiveness.

  18. Pulpal inflammation after vital tooth bleaching with 38% hydrogen peroxide

    Directory of Open Access Journals (Sweden)

    Ardiny Andriani

    2012-06-01

    Full Text Available Background: In-office vital tooth bleaching is a treatment to remove tooth stains. Tooth sensitivity is one of side effect commonly complained by patients receiving this treatment. Purpose: The aim of this study was to examine histological inflammatory cells infiltration of dental pulp after application of 38% H2O2 as a vital tooth bleaching agent. Methods: Under informed consent, a total of 15 premolars from 8 healthy subjects scheduled for orthodontic extraction were used in this study. Thirty eight percent H2O2 was applied on the buccal surface of the treated group. The treated teeth were extracted after 1 hour, 5, 8, and 15 days. All specimens were embedded in paraffin wax, sectioned serially and stained with Hematoxyllin Eosin. Histological specimens were then observed under a light microscope. Results: All treated groups showed a slight disorganization of odontoblasts layer and slight inflammation in the pulp tissue adjacent to the 38% H2O2 application site. The number of polymorphonuclear leukocytes (PMN had increased significantly 1 hour after application of 38% H2O2 (p<0.05, while macrophages had significantly increased 5 days after the application (p<0.05. The most intense PMN and macrophages infiltration was found 5 days after the application and gradually decreased 8 days after application of38% H2O2. Conclusion: Application of 38% H2O2 as a vital tooth bleaching agent induces acute inflammation in human dental pulp; however, the inflammation will decrease 8 days after the application.Latar belakang: Perawatan pemutihan gigi vital metode in-office merupakan tindakan untuk menghilangkan pewarnaan pada gigi. Salah satu efek samping yang sering dikeluhkan oleh pasien yang menjalani perawatan ini adalah sensitivitas gigi. Tujuan: Penelitian ini bertujuan untuk mengamati infiltrasi sel inflamasi pada pulpa gigi setelah aplikasi H2O2 38% sebagai bahan pemutih gigi. Metode: Sampel penelitian ini berupa 15 gigi premolar yang berasal dari 8

  19. Influence of bleaching on flavor of 34% whey protein concentrate and residual benzoic acid concentration in dried whey proteins.

    Science.gov (United States)

    Listiyani, M A D; Campbell, R E; Miracle, R E; Dean, L O; Drake, M A

    2011-09-01

    Previous studies have shown that bleaching negatively affects the flavor of 70% whey protein concentrate (WPC70), but bleaching effects on lower-protein products have not been established. Benzoyl peroxide (BP), a whey bleaching agent, degrades to benzoic acid (BA) and may elevate BA concentrations in dried whey products. No legal limit exists in the United States for BP use in whey, but international concerns exist. The objectives of this study were to determine the effect of hydrogen peroxide (HP) or BP bleaching on the flavor of 34% WPC (WPC34) and to evaluate residual BA in commercial and experimental WPC bleached with and without BP. Cheddar whey was manufactured in duplicate. Pasteurized fat-separated whey was subjected to hot bleaching with either HP at 500 mg/kg, BP at 50 or 100 mg/kg, or no bleach. Whey was ultrafiltered and spray dried into WPC34. Color [L*(lightness), a* (red-green), and b* (yellow-blue)] measurements and norbixin extractions were conducted to compare bleaching efficacy. Descriptive sensory and instrumental volatile analyses were used to evaluate bleaching effects on flavor. Benzoic acid was extracted from experimental and commercial WPC34 and 80% WPC (WPC80) and quantified by HPLC. The b* value and norbixin concentration of BP-bleached WPC34 were lower than HP-bleached and control WPC34. Hydrogen peroxide-bleached WPC34 displayed higher cardboard flavor and had higher volatile lipid oxidation products than BP-bleached or control WPC34. Benzoyl peroxide-bleached WPC34 had higher BA concentrations than unbleached and HP-bleached WPC34 and BA concentrations were also higher in BP-bleached WPC80 compared with unbleached and HP-bleached WPC80, with smaller differences than those observed in WPC34. Benzoic acid extraction from permeate showed that WPC80 permeate contained more BA than did WPC34 permeate. Benzoyl peroxide is more effective in color removal of whey and results in fewer flavor side effects compared with HP and residual BA is

  20. The 2014 coral bleaching and freshwater flood events in Kāne'ohe Bay, Hawai'i.

    Science.gov (United States)

    Bahr, Keisha D; Jokiel, Paul L; Rodgers, Kuʻulei S

    2015-01-01

    Until recently, subtropical Hawai'i escaped the major bleaching events that have devastated many tropical regions, but the continued increases in global long-term mean temperatures and the apparent ending of the Pacific Decadal Oscillation (PDO) cool phase have increased the risk of bleaching events. Climate models and observations predict that bleaching in Hawai'i will occur with increasing frequency and increasing severity over future decades. A freshwater "kill" event occurred during July 2014 in the northern part of Kāne'ohe Bay that reduced coral cover by 22.5% in the area directly impacted by flooding. A subsequent major bleaching event during September 2014 caused extensive coral bleaching and mortality throughout the bay and further reduced coral cover in the freshwater kill area by 60.0%. The high temperature bleaching event only caused a 1.0% reduction in live coral throughout the portion of the bay not directly impacted by the freshwater event. Thus, the combined impact of the low salinity event and the thermal bleaching event appears to be more than simply additive. The temperature regime during the September 2014 bleaching event was analogous in duration and intensity to that of the large bleaching event that occurred previously during August 1996, but resulted in a much larger area of bleaching and coral mortality. Apparently seasonal timing as well as duration and magnitude of heating is important. Coral spawning in the dominant coral species occurs early in the summer, so reservoirs of stored lipid in the corals had been depleted by spawning prior to the September 2014 event. Warm months above 27 °C result in lower coral growth and presumably could further decrease lipid reserves, leading to a bleaching event that was more severe than would have happened if the high temperatures occurred earlier in the summer. Hawaiian reef corals decrease skeletal growth at temperatures above 27 °C, so perhaps the "stress period" actually started long before the

  1. Clareamento gengival: ensino e etnocentrismo Gingival bleaching: teaching and ethnocentrism

    Directory of Open Access Journals (Sweden)

    Edson Daruich Bolla

    2010-06-01

    Full Text Available O estudo objetivou identificar os padrões de estética bucal/gengival subjacentes à formação e prática profissional do cirurgião-dentista, na perspectiva do etnocentrismo. A partir da análise documental e da realização de entrevistas (semiestruturadas com cirurgiões dentistas formados há dez ou mais anos, o estudo recorreu a uma abordagem qualitativa, ancorada na análise temática. No âmbito do ensino da periodontia, o estudo evidenciou que a presença da pigmentação fisiológica é omitida ou tratada como uma alteração de normalidade e/ou antiestética. Todos os entrevistados aprenderam a realizar o clareamento gengival em nível de pós-graduação, sendo estimulados a ofertar tal procedimento em nome de um sorriso saudável e bonito. Diante da supervalorização da eficiência da técnica, ressalta a ausência da discussão da questão estética na perspectiva étnica. Parece que a oferta do clareamento gengival se faz norteada pelo padrão branco de beleza, evidenciando o caráter etnocêntrico do procedimento.The aim of this study was to identify buccal/gingival cosmetic dentistry patterns subjacent to formation and professional practice of the dental surgeon from the ethnocentrism point of view. This is an exploratory study with a qualitative approach based on the thematic analysis. Initially a documental analysis was carried out. Thereafter, dental surgeons were interviewed and semi-structured questions were applied. In the Periodontal teaching field, this study showed that the presence of racial melanosis is omitted or treated as an alteration in the normality patterns and it is considered anti-aesthetic. All the interviewers learnt how to practice gingival bleaching in the post-graduation courses, they were all encouraged to offer this cosmetic dentistry procedure with the opportunity of obtaining a beautiful and healthy smile, thus assuring the belief of the Caucasian racial aesthetic superiority. This study make us

  2. An evaluation of the effect of recent temperature variability on the prediction of coral bleaching events.

    Science.gov (United States)

    Donner, Simon D

    2011-07-01

    Over the past 30 years, warm thermal disturbances have become commonplace on coral reefs worldwide. These periods of anomalous sea surface temperature (SST) can lead to coral bleaching, a breakdown of the symbiosis between the host coral and symbiotic dinoflagellates which reside in coral tissue. The onset of bleaching is typically predicted to occur when the SST exceeds a local climatological maximum by 1 degrees C for a month or more. However, recent evidence suggests that the threshold at which bleaching occurs may depend on thermal history. This study uses global SST data sets (HadISST and NOAA AVHRR) and mass coral bleaching reports (from Reefbase) to examine the effect of historical SST variability on the accuracy of bleaching prediction. Two variability-based bleaching prediction methods are developed from global analysis of seasonal and interannual SST variability. The first method employs a local bleaching threshold derived from the historical variability in maximum annual SST to account for spatial variability in past thermal disturbance frequency. The second method uses a different formula to estimate the local climatological maximum to account for the low seasonality of SST in the tropics. The new prediction methods are tested against the common globally fixed threshold method using the observed bleaching reports. The results find that estimating the bleaching threshold from local historical SST variability delivers the highest predictive power, but also a higher rate of Type I errors. The second method has the lowest predictive power globally, though regional analysis suggests that it may be applicable in equatorial regions. The historical data analysis suggests that the bleaching threshold may have appeared to be constant globally because the magnitude of interannual variability in maximum SST is similar for many of the world's coral reef ecosystems. For example, the results show that a SST anomaly of 1 degrees C is equivalent to 1.73-2.94 standard

  3. Shear Bond Strength of Resin Bonded to Bleached Enamel Using Different Modified 35% Hydrogen Peroxides

    Directory of Open Access Journals (Sweden)

    Moosavi H

    2015-12-01

    Full Text Available Statement of Problem: Bleaching systems with different concentrations and applications are widely used to improve the visual appearance of the teeth, but one of the complications of these materials is reduction of bond strength for immediately bonding to the bleached enamel. Objectives: The aim of this study was to evaluate the influence of using different modified hydrogen peroxide bleaching agents on the shear bond strength of composite resin bonded to the bleached enamel. Materials and Methods: Forty-eight sound extracted premolar teeth were collected, sectioned 1 mm below the CEJ to detach the root. The proximal surfaces of the teeth were flattened using diamond disks and silicon carbide papers to achieve flat homogeneous enamel surfaces without exposure to the dentin. The teeth were randomly divided into four groups as follows (n = 12: group 1: bleaching with 35% hydrogen peroxide gel; group 2: bleaching with 35% hydrogen peroxide gel contained (casein phosphopeptide-amorphous calcium phosphate (CPP-ACP; group 3: bleaching with 35% hydrogen peroxide gel combined with fluoride; and group 4: bleaching with 35% hydrogen peroxide applying one week before resin restoration placement. Composite resin, Clearfil AP-X (Kuraray, Tokyo, Japan, was bonded on each tooth in the mould (4 mm diameter × 3 mm height using Clearfil SE Bond (Kuraray, Tokyo, Japan. After 24 hours of storage and 1000 cycles of thermocycling, the shear bond strength of the specimens at a cross-head speed of 0.5 mm/min was measured in MPa. Data were analyzed using ANOVA and Tukey’s post-hoc test. Results: The minimum and maximum mean shear bond strength values were observed in groups 2 (15.82 ± 4.41 and 4 (21.00 ± 3.90, respectively. Multiple comparisons of groups revealed no significant differences among the groups except between group 4 and all the other groups. The most common type of failure was adhesive. Conclusions: Using modified bleaching agents decreased the bond

  4. Resilience and climate change: lessons from coral reefs and bleaching in the Western Indian Ocean

    Science.gov (United States)

    Obura, David O.

    2005-05-01

    The impact of climate change through thermal stress-related coral bleaching on coral reefs of the Western Indian Ocean has been well documented and is caused by rising sea water temperatures associated with background warming trends and extreme climate events. Recent studies have identified a number of factors that may reduce the impact of coral bleaching and mortality at a reef or sub-reef level. However, there is little scientific consensus as yet, and it is unclear how well current science supports the immediate needs of management responses to climate change. This paper provides evidence from the Western Indian Ocean in support of recent hypotheses on coral and reef vulnerability to thermal stress that have been loosely termed 'resistance and resilience to bleaching'. The paper argues for a more explicit definition of terms, and identifies three concepts affecting coral-zooxanthellae holobiont and reef vulnerability to thermal stress previously termed 'resistance to bleaching': 'thermal protection', where some reefs are protected from the thermal conditions that induce bleaching and/or where local physical conditions reduce bleaching and mortality levels; 'thermal resistance', where individual corals bleach to differing degrees to the same thermal stress; and 'thermal tolerance', where individual corals suffer differing levels of mortality when exposed to the same thermal stress. 'Resilience to bleaching' is a special case of ecological resilience, where recovery following large-scale bleaching mortality varies according to ecological and other processes. These concepts apply across multiple levels of biological organization and temporal and spatial scales. Thermal resistance and tolerance are genetic properties and may interact with environmental protection properties resulting in phenotypic variation in bleaching and mortality of corals. The presence or absence of human threats and varying levels of reef management may alter the influence of the above factors

  5. Comparisons of the 1995 and 1998 coral bleaching events on the patch reefs of San Salvador Island, Bahamas

    OpenAIRE

    McGrath, Thomas A.; Smith, Garriet W.

    2016-01-01

    Coral patch reefs around San Salvador Island, Bahamas have been monitored with the aid of Earthwatch volunteers three times a year since 1992. During that period two significant mass bleaching events occurred: autumn 1995, and late summer 1998. Elsewhere in 1995, bleaching was caused by higher-than-normal summer sea tempera-tures; in San Salvador, however, temperatures were normal. In 1998 a prolonged period of higher-than-normal sea temperatures preceded bleaching on San Salvador and worldwi...

  6. Does a toothpaste containing blue covarine have any effect on bleached teeth? An in vitro, randomized and blinded study.

    Science.gov (United States)

    Bortolatto, Janaina Freitas; Dantas, Andrea Abi Rached; Roncolato, Ávery; Merchan, Hugo; Floros, Michael Christopher; Kuga, Milton Carlos; Oliveira Junior, Osmir Batista de

    2016-01-01

    The objective of this study was to analyze the effect of bleaching toothpastes, both conventional and those containing the new whitening agent Blue Covarine, on teeth previously bleached by conventional techniques (in-office and at-home). Squared bovine enamel/dentin blocks (6.0 x 6.0 x 2.0 mm) were randomly distributed in 6 groups (n = 15), according to the technique used to bleach them (in-office: HP35%; at-home: PC10%) and the type of bleaching toothpaste (none: control; Blue Covarine containing: BC; and without Blue Covarine: NBC). Experimental groups denominated HP35%, HP35%BC and HP35%NBC received in-office tooth bleaching before toothbrushing, and groups PC10%, PC10%BC and PC10%NBC were subjected to at-home tooth bleaching prior to toothbrushing. After bleaching treatment, groups HP35%BC, PC10%BC, HP35%NBC and PC10%NBC underwent daily tooth brushing in a brushing machine for 3 minutes (150 strokes/min, with a load of 375 g). Tooth color alteration was measured by reflectance spectroscopy (Vita EasyShade, Vident, Brea, CA, USA) at: T0 (baseline) - after in-office or at-home bleaching treatment; T1 - immediately after tooth brushing; T2 - 7 days and T3 - 14 days after tooth brushing. Data was analyzed by repeated measures mixed ANOVA and the Bonferroni post hoc test, with a significance level of 5%. Statistically significant differences were found between different experimental groups, evaluation times and for the interaction between them (p toothpaste (conventional or with Blue Covarine) showed no color alteration on teeth previously bleached by in-office and at-home tooth bleaching. The use of bleaching toothpastes on previously bleached teeth did not produce a color alteration.

  7. A depth refugium from catastrophic coral bleaching prevents regional extinction.

    Science.gov (United States)

    Smith, Tyler B; Glynn, Peter W; Maté, Juan L; Toth, Lauren T; Gyory, Joanna

    2014-06-01

    Species intolerant of changing climate might avoid extinction within refugia buffered from extreme conditions. Refugia have been observed in the fossil record but are not well documented or understood on ecological time scales. Using a 37-year record from the eastern Pacific across the two most severe El Niño events on record (1982-1983 and 1997 1998) we show how an exceptionally thermally sensitive reef-building hydrocoral, Millepora intricata, twice survived catastrophic bleaching in a deeper-water refuge (> 11 m depth). During both events, M. intricata was extirpated across its range in shallow water, but showed recovery within several years, while two other hydrocorals without deep-water populations were driven to regional extinction. Evidence from the subfossil record in the same area showed shallow-water persistence of abundant M. intricata populations from 5000 years ago, through severe El Niño-Southern Oscillation cycles, suggesting a potential depth refugium on a millennial timescale. Our data confirm the deep refuge hypothesis for corals under thermal stress.

  8. STUDIES ON XYLANASE AND LACCASE ENZYMATIC PREBLEACHING TO REDUCE CHLORINE-BASED CHEMICALS DURING CEH AND ECF BLEACHING

    Directory of Open Access Journals (Sweden)

    Vasanta V. Thakur,

    2012-02-01

    Full Text Available The biobleaching efficiency of xylanase and laccase enzymes was studied on kraft pulps from wood and nonwood based raw materials employed in the Indian paper industry. Treatment of these pulps with xylanase enzyme could result in improved properties, showing 2.0% ISO gain in pulp brightness and/or reducing the demand of chlorine-based bleach chemicals by up to 15% with simultaneous reduction of 20 to 25% in AOX generation in bleach effluents. Further, mill-scale trial results revealed that enzymatic prebleaching can be successfully employed with xylanases to reach the same bleach boosting efficacy. Laccase bleaching was also studied on hardwood pulp at a pH around 8.0, where most of the pulp mills in India are operating, in contrast to earlier studies on laccase enzyme bleaching, which were conducted at acidic pHs, i.e. 4.0 to 5.0. In case of laccase bleaching, interesting results were found wherein a bleach-boosting effect was observed even at pH 8.0. Further studies carried out with HOBT as mediator in comparison to the commonly used and expensive ABTS laccase mediator system (LMS resulted in improvement of the bleaching efficiency with reduction in demand of chlorine dioxide by more than 35%. Potential for further reduction was indicated by the brightness gain, when compared with a control using the DE(pD bleach sequence.

  9. Effect of Bleaching on Hardness, Gloss, and Color Change of Weathered Woods

    Directory of Open Access Journals (Sweden)

    Mehmet Budakçı

    2014-03-01

    Full Text Available The aim of this study was to eliminate the problems of hardness, gloss, and color change of some wood materials exposed to weathering conditions using a bleaching procedure to attempt to return the wood material to its natural state. For this, wood samples of Scots pine (Pinus sylvestris L., Eastern beech (Fagus orientalis L., sessile oak (Quercus petraea L., and chestnut (Castanea sativa Mill. were exposed to weathering conditions based on 12 months ASTM D-1641, followed by a bleaching procedure using 18% solutions of S1 (NaOH + H2O2, S2 (NaOH + Ca(OH2, S3 (KMnO4 + NaHSO3 + H2O2, S4 (NaSiO3 + H2O2, and the commercial product S5 (Cuprinol Decking Restorer- (H2C2O4 + C2H4(OH2. The color, gloss, and hardness changes of samples were determined according to ASTM D 2244-2, EN ISO 2813, and ASTM D 2240 standards. As a result, hardness and gloss values of all woods decreased due to weathering conditions and the wood color turned grey due to degradation. When comparing the weathered samples to the bleached samples, the hardness value was found to be highest in pine wood bleached with the S2 solution, and the gloss value was highest in oak wood bleached with the S1 solution. The greatest color change was found in pine, beech, and chestnut samples bleached with the S4 solution and in oak samples bleached with the S1 solution.

  10. Surviving coral bleaching events: porites growth anomalies on the Great Barrier Reef.

    Science.gov (United States)

    Cantin, Neal E; Lough, Janice M

    2014-01-01

    Mass coral bleaching affected large parts of the Great Barrier Reef (GBR) in 1998 and 2002. In this study, we assessed if signatures of these major thermal stress events were recorded in the growth characteristics of massive Porites colonies. In 2005 a suite of short (bleaching. Sites included inshore (Nelly Bay, Pandora Reef), annually affected by freshwater flood events, midshelf (Rib Reef), only occasionally affected by freshwater floods and offshore (Myrmidon Reef) locations primarily exposed to open ocean conditions. Annual growth characteristics (extension, density and calcification) were measured in 144 cores from 79 coral colonies and analysed over the common 24-year period, 1980-2003. Visual examination of the annual density bands revealed growth hiatuses associated with the bleaching years in the form of abrupt decreases in annual linear extension rates, high density stress bands and partial mortality. The 1998 mass-bleaching event reduced Porites calcification by 13 and 18% on the two inshore locations for 4 years, followed by recovery to baseline calcification rates in 2002. Evidence of partial mortality was apparent in 10% of the offshore colonies in 2002; however no significant effects of the bleaching events were evident in the calcification rates at the mid shelf and offshore sites. These results highlight the spatial variation of mass bleaching events and that all reef locations within the GBR were not equally stressed by the 1998 and 2002 mass bleaching events, as some models tend to suggest, which enabled recovery of calcification on the GBR within 4 years. The dynamics in annual calcification rates and recovery displayed here should be used to improve model outputs that project how coral calcification will respond to ongoing warming of the tropical oceans.

  11. Chronic nutrient enrichment increases prevalence and severity of coral disease and bleaching.

    Science.gov (United States)

    Vega Thurber, Rebecca L; Burkepile, Deron E; Fuchs, Corinne; Shantz, Andrew A; McMinds, Ryan; Zaneveld, Jesse R

    2014-02-01

    Nutrient loading is one of the strongest drivers of marine habitat degradation. Yet, the link between nutrients and disease epizootics in marine organisms is often tenuous and supported only by correlative data. Here, we present experimental evidence that chronic nutrient exposure leads to increases in both disease prevalence and severity and coral bleaching in scleractinian corals, the major habitat-forming organisms in tropical reefs. Over 3 years, from June 2009 to June 2012, we continuously exposed areas of a coral reef to elevated levels of nitrogen and phosphorus. At the termination of the enrichment, we surveyed over 1200 scleractinian corals for signs of disease or bleaching. Siderastrea siderea corals within enrichment plots had a twofold increase in both the prevalence and severity of disease compared with corals in unenriched control plots. In addition, elevated nutrient loading increased coral bleaching; Agaricia spp. of corals exposed to nutrients suffered a 3.5-fold increase in bleaching frequency relative to control corals, providing empirical support for a hypothesized link between nutrient loading and bleaching-induced coral declines. However, 1 year later, after nutrient enrichment had been terminated for 10 months, there were no differences in coral disease or coral bleaching prevalence between the previously enriched and control treatments. Given that our experimental enrichments were well within the ranges of ambient nutrient concentrations found on many degraded reefs worldwide, these data provide strong empirical support to the idea that coastal nutrient loading is one of the major factors contributing to the increasing levels of both coral disease and coral bleaching. Yet, these data also suggest that simple improvements to water quality may be an effective way to mitigate some coral disease epizootics and the corresponding loss of coral cover in the future.

  12. Opposite latitudinal gradients in projected ocean acidification and bleaching impacts on coral reefs.

    Science.gov (United States)

    van Hooidonk, Ruben; Maynard, Jeffrey Allen; Manzello, Derek; Planes, Serge

    2014-01-01

    Coral reefs and the services they provide are seriously threatened by ocean acidification and climate change impacts like coral bleaching. Here, we present updated global projections for these key threats to coral reefs based on ensembles of IPCC AR5 climate models using the new Representative Concentration Pathway (RCP) experiments. For all tropical reef locations, we project absolute and percentage changes in aragonite saturation state (Ωarag) for the period between 2006 and the onset of annual severe bleaching (thermal stress >8 degree heating weeks); a point at which it is difficult to believe reefs can persist as we know them. Severe annual bleaching is projected to start 10-15 years later at high-latitude reefs than for reefs in low latitudes under RCP8.5. In these 10-15 years, Ωarag keeps declining and thus any benefits for high-latitude reefs of later onset of annual bleaching may be negated by the effects of acidification. There are no long-term refugia from the effects of both acidification and bleaching. Of all reef locations, 90% are projected to experience severe bleaching annually by 2055. Furthermore, 5% declines in calcification are projected for all reef locations by 2034 under RCP8.5, assuming a 15% decline in calcification per unit of Ωarag. Drastic emissions cuts, such as those represented by RCP6.0, result in an average year for the onset of annual severe bleaching that is ~20 years later (2062 vs. 2044). However, global emissions are tracking above the current worst-case scenario devised by the scientific community, as has happened in previous generations of emission scenarios. The projections here for conditions on coral reefs are dire, but provide the most up-to-date assessment of what the changing climate and ocean acidification mean for the persistence of coral reefs.

  13. Surviving coral bleaching events: porites growth anomalies on the Great Barrier Reef.

    Directory of Open Access Journals (Sweden)

    Neal E Cantin

    Full Text Available Mass coral bleaching affected large parts of the Great Barrier Reef (GBR in 1998 and 2002. In this study, we assessed if signatures of these major thermal stress events were recorded in the growth characteristics of massive Porites colonies. In 2005 a suite of short (<50 cm cores were collected from apparently healthy, surviving Porites colonies, from reefs in the central GBR (18-19°S that have documented observations of widespread bleaching. Sites included inshore (Nelly Bay, Pandora Reef, annually affected by freshwater flood events, midshelf (Rib Reef, only occasionally affected by freshwater floods and offshore (Myrmidon Reef locations primarily exposed to open ocean conditions. Annual growth characteristics (extension, density and calcification were measured in 144 cores from 79 coral colonies and analysed over the common 24-year period, 1980-2003. Visual examination of the annual density bands revealed growth hiatuses associated with the bleaching years in the form of abrupt decreases in annual linear extension rates, high density stress bands and partial mortality. The 1998 mass-bleaching event reduced Porites calcification by 13 and 18% on the two inshore locations for 4 years, followed by recovery to baseline calcification rates in 2002. Evidence of partial mortality was apparent in 10% of the offshore colonies in 2002; however no significant effects of the bleaching events were evident in the calcification rates at the mid shelf and offshore sites. These results highlight the spatial variation of mass bleaching events and that all reef locations within the GBR were not equally stressed by the 1998 and 2002 mass bleaching events, as some models tend to suggest, which enabled recovery of calcification on the GBR within 4 years. The dynamics in annual calcification rates and recovery displayed here should be used to improve model outputs that project how coral calcification will respond to ongoing warming of the tropical oceans.

  14. Coral bleaching on high-latitude marginal reefs at Sodwana Bay, South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Celliers, Louis; Schleyer, Michael H

    2002-12-01

    Coral bleaching, involving the expulsion of symbiotic zooxanthellae from the host cells, poses a major threat to coral reefs throughout their distributional range. The role of temperature in coral bleaching has been extensively investigated and is widely accepted. A bleaching event was observed on the marginal high-latitude reefs of South Africa located at Sodwana Bay during the summer months of 2000. This was associated with increased sea temperatures with high seasonal peaks in summer and increased radiation in exceptionally clear water. The bleaching was limited to Two-mile Reef and Nine-mile Reef at Sodwana Bay and affected <12% of the total living cover on Two-mile Reef. Montipora spp., Alveopora spongiosa and Acropora spp. were bleached, as well as some Alcyoniidae (Sinularia dura, Lobophytum depressum, L. patulum). A cyclical increase in sea temperature (with a period of 5-6 years) was recorded during 1998-2000 in addition to the regional temperature increase caused by the El Nino Southern Oscillation phenomenon. The mean sea temperature increased at a rate of 0.27 deg. C year{sup -1} from May 1994 to April 2000. High maximum temperatures were measured (>29 deg. C). The lowest mean monthly and the mean maximum monthly temperatures at which coral bleaching occurred were 27.5 and 28.8 deg. C, respectively, while the duration for which high temperatures occurred in 2000 was 67 days at {>=}27.5 deg. C (4 days at {>=}28.8 deg. C). Increased water clarity and radiation appeared to be a synergistic cause in the coral bleaching encountered at Sodwana Bay.

  15. Effectiveness of home bleaching agents in discolored teeth and influence on enamel microhardness

    Directory of Open Access Journals (Sweden)

    Carina Sinclér Delfino

    2009-08-01

    Full Text Available OBJECTIVES: This study evaluated the effectiveness of different home bleaching agents on color alteration and their influence on surface and subsurface microhardness of discolored bovine enamel. MATERIAL AND METHODS: Forty-five fragments of bovine incisors were randomly allocated into 3 groups (n=15 according to the bleaching agent: 10% carbamide peroxide gel (CP10, 16% carbamide peroxide gel (CP16 and 6.5%-hydrogen-peroxide-based strip (HP6.5. Before bleaching treatment, initial values of Knoop surface microhardness and color (CIEL*a*b* were obtained and the fragments were artificially stained in hemolyzed rat blood. Then, bleaching treatments were performed over a 21-day period. Color changes (ΔE were assessed at 7, 14 and 21 days, and final surface microhardness reading was done after 21 days. Thereafter, the fragments were bisected to obtain subsurface microhardness. Data were subjected to ANOVA and Tukey's tests (α=5%. RESULTS: Color changes produced by CP16 were similar to those of CP10, and the color changes produced by these materials were significantly superior to those produced by HP6.5. Color changes at 21 days were superior to 7 days and similar to 14 days. The time did not influence color changes for CP16, which showed similarity between the 14- and 21-day results. No statistically significant differences were found among the home bleaching agents for surface and subsurface microhardness. CONCLUSIONS: Microhardness of bovine enamel was not affected by the bleaching agents. The 16% carbamide peroxide gel was the most effective for bleaching the stained substrate.

  16. Acid demineralization susceptibility of dental enamel submitted to different bleaching techniques and fluoridation regimens.

    Science.gov (United States)

    Salomão, Dlf; Santos, Dm; Nogueira, Rd; Palma-Dibb, Rg; Geraldo-Martins, Vr

    2014-01-01

    The aim of the current study was to assess the acid demineralization susceptibility of bleached dental enamel submitted to different fluoride regimens. One hundred bovine enamel blocks (6×6×3 mm) were randomly divided into 10 groups (n=10). Groups 1 and 2 received no bleaching. Groups 3 to 6 were submitted to an at-home bleaching technique using 6% hydrogen peroxide (HP; G3 and G4) or 10% carbamide peroxide (CP; G5 and G6). Groups 7 to 10 were submitted to an in-office bleaching technique using 35% HP (G7 and G8) or 35% CP (G9 and G10). During bleaching, a daily fluoridation regimen of 0.05% sodium fluoride (NaF) solution was performed on groups 3, 5, 7, and 9, while weekly fluoridation with a 2% NaF gel was performed on groups 4, 6, 8, and 10. The samples in groups 2 to 10 were pH cycled for 14 consecutive days. The samples from all groups were then assessed by cross-sectional Knoop microhardness at different depths from the outer enamel surface. The average Knoop hardness numbers (KHNs) were compared using one-way analysis of variance and Tukey tests (α=0.05). The comparison between groups 1 and 2 showed that the demineralization method was effective. The comparison among groups 2 to 6 showed the same susceptibility to acid demineralization, regardless of the fluoridation method used. However, the samples from groups 8 and 10 showed more susceptibility to acid demineralization when compared with group 2 (penamel to acid demineralization. However, the use of 35% HP and 35% CP must be associated with a daily fluoridation regimen, otherwise the in-office bleaching makes the bleached enamel more susceptible to acid demineralization.

  17. In vitro study of the pulp chamber temperature rise during light-activated bleaching

    Directory of Open Access Journals (Sweden)

    Thaise Graciele Carrasco

    2008-10-01

    Full Text Available This study evaluated in vitro the pulp chamber temperature rise induced by the light-activated dental bleaching technique using different light sources. The root portions of 78 extracted sound human mandibular incisors were sectioned approximately 2 mm below the cementoenamel junction. The root cavities of the crowns were enlarged to facilitate the correct placing of the sensor into the pulp chamber. Half of specimens (n=39 was assigned to receive a 35% hydrogen peroxide gel on the buccal surface and the other halt (n=39 not to receive the bleaching agent. Three groups (n=13 were formed for each condition (bleach or no bleach according to the use of 3 light sources recommended for dental bleaching: a light-emitting diode (LEDlaser system, a LED unit and a conventional halogen light. The light sources were positioned perpendicular to the buccal surface at a distance of 5 mm and activated during 30 s. The differences between the initial and the highest temperature readings for each specimen were obtained, and, from the temperature changes, the means for each specimen and each group were calculated. The values of temperature rise were compared using Kruskal-Wallis test at 1% significance level. Temperature rise varied significantly depending on the light-curing unit, with statistically significant differences (p0.01. When the bleaching agent was applied, there were significant differences among groups (p<0.01: halogen light induced the highest temperature rise (1.41±0.64ºC, and LED-laser system the lowest (0.33±0.12ºC; however, there was no difference between LED-laser system and LED unit (0.44±0.11ºC. LED and LED-laser system did not differ significantly from each other regardless the temperature rise occurred with or without bleaching agent application. It may be concluded that during light-activated tooth bleaching, with or without the bleaching agent, halogen light promoted higher pulp chamber temperature rise than LED unit and LED

  18. Influence of microhybrid resin and etching times on bleached enamel for the bonding of ceramic brackets.

    Science.gov (United States)

    Firoozmand, Leily Macedo; Brandão, Juliana Viana Pereira; Fialho, Melissa Proença Nogueira

    2013-01-01

    The aim of this study was to evaluate the shear bond strength (SBS) of polycrystalline ceramic brackets (PCB) bonded after bleaching treatment using different composite resins and enamel etching times. A total of 144 bovine incisors were randomly divided into two study groups (n = 72, each) as follows: G1, enamel bleached with 35% hydrogen peroxide, and G2 (control group), enamel unbleached. After the bleaching treatment, the samples were stored in artificial saliva for 14 days. These groups were further divided into two subgroups (n = 36, each) as follows: GA, brackets bonded with Transbond XT (3M) and GB, brackets bonded with Filtek Z250 (3M). For each resin used, three different etching times with 37% phosphoric acid (15, 30 and 60 seconds) were tested. SBS tests were performed using a universal testing machine (EMIC), and the adhesive remnant index (ARI) score was verified. Significant differences among the three experimental conditions and interactions between the groups were observed. The type of composite resin accounted for 24% of the influence on the bond strength, whereas the etching time and bleaching treatment accounted for 14.5% and 10% of the influence on bond strength, respectively. The ARI revealed that the most common area of adhesion failure was at the composite resin-bracket interface. The type of composite resin, etching time and external bleaching significantly influenced the SBS of PCB on enamel, even after 14 days of saliva storage.

  19. Effects of cold light bleaching on the color stability of composite resins.

    Science.gov (United States)

    Cao, Liqun; Huang, Lijuan; Wu, Meisheng; Wei, Hua; Zhao, Shouliang

    2015-01-01

    To evaluate the effects of cold light bleaching on the color stability of four restorations using a thermocycling stain challenge. 160 specimens (10 mm in diameter and 2 mm thick) were fabricated from 4 composite resins (Gradia Direct-A, Z350XT, Premisa, and Précis) and divided into 4 subgroups. Color was assessed according to the CIEL*a*b* color scale at baseline, after the first cycle of bleaching, after thermocycling stain challenges, and after the second cycle of bleaching. Mean values were compared using three-way analysis of variance, and multiple comparisons of the mean values were performed using the Tukey-Kramer test. All groups showed significant color changes after stain challenge, the color change was more significant in Gradia Direct and Z350XT than in Premisa and Précis. After the second cycle of bleaching, color mostly recovered to its original values. The color stability of Gradia Direct and Z350XT was inferior to that of Premisa and Précis. The discoloration of composite resin materials can be partly removed after cold light bleaching.

  20. Effect of postoperative peroxide bleaching on the stability of composite to enamel and dentin bonds.

    Science.gov (United States)

    Dudek, M; Roubickova, A; Comba, L; Housova, D; Bradna, P

    2013-01-01

    This study investigated the effect of peroxide bleaching gel on the durability of the adhesive bond between composite material, enamel, and dentin created with the etch-and-rinse adhesive Gluma Comfort Bond (GLU) and with the self-etch adhesives Clearfil SE Bond (CLE), Adper Prompt (ADP), and iBond (IBO). The adhesives were applied to flattened enamel and dentin of extracted human molars and built up with a microhybrid composite (Charisma). After 25 eight-hour cycles of bleaching with a 20% carbamide peroxide bleaching gel (Opalescence PF 20), the shear bond strength was measured and compared with one-day and two-month control specimens stored in water. The data were analyzed using nonparametric Mann-Whitney and Kruskal-Wallis statistics (pIBO and markedly affected a fracture pattern of ADP specimens at the periphery of their bonded area. The results of our study indicate that the durability of adhesive restorations can be detrimentally influenced by carbamide peroxide bleaching and that different adhesives show varying sensitivity levels to the bleaching gel.

  1. Ocean acidification has no effect on thermal bleaching in the coral Seriatopora caliendrum

    Science.gov (United States)

    Wall, C. B.; Fan, T.-Y.; Edmunds, P. J.

    2014-03-01

    The objective of this study was to test whether elevated pCO2 predicted for the year 2100 (85.1 Pa) affects bleaching in the coral Seriatopora caliendrum (Ehrenberg 1834) either independently or interactively with high temperature (30.5 °C). Response variables detected the sequence of events associated with the onset of bleaching: reduction in the photosynthetic performance of symbionts as measured by maximum photochemical efficiency ( F v/ F m) and effective photochemical efficiency (Δ F/ F m') of PSII, declines in net photosynthesis ( P net) and photosynthetic efficiency (alpha, α), and finally, reduced chlorophyll a and symbiont concentrations. S. caliendrum was collected from Nanwan Bay, Taiwan, and subjected to combinations of temperature (27.7 vs. 30.5 °C) and pCO2 (45.1 vs. 85.1 Pa) for 14 days. High temperature reduced values of all dependent variables (i.e., bleaching occurred), but high pCO2 did not affect Symbiodinium photophysiology or productivity, and did not cause bleaching. These results suggest that short-term exposure to 81.5 Pa pCO2, alone and in combination with elevated temperature, does not cause or affect coral bleaching.

  2. Influence of microhybrid resin and etching times on bleached enamel for the bonding of ceramic brackets

    Directory of Open Access Journals (Sweden)

    Leily Macedo Firoozmand

    2013-04-01

    Full Text Available The aim of this study was to evaluate the shear bond strength (SBS of polycrystalline ceramic brackets (PCB bonded after bleaching treatment using different composite resins and enamel etching times. A total of 144 bovine incisors were randomly divided into two study groups (n = 72, each as follows: G1, enamel bleached with 35% hydrogen peroxide, and G2 (control group, enamel unbleached. After the bleaching treatment, the samples were stored in artificial saliva for 14 days. These groups were further divided into two subgroups (n = 36, each as follows: GA, brackets bonded with Transbond XT (3M and GB, brackets bonded with Filtek Z250 (3M. For each resin used, three different etching times with 37% phosphoric acid (15, 30 and 60 seconds were tested. SBS tests were performed using a universal testing machine (EMIC, and the adhesive remnant index (ARI score was verified. Significant differences among the three experimental conditions and interactions between the groups were observed. The type of composite resin accounted for 24% of the influence on the bond strength, whereas the etching time and bleaching treatment accounted for 14.5% and 10% of the influence on bond strength, respectively. The ARI revealed that the most common area of adhesion failure was at the composite resin-bracket interface. The type of composite resin, etching time and external bleaching significantly influenced the SBS of PCB on enamel, even after 14 days of saliva storage.

  3. Correlation between deformation bleaching and mechanoluminescence in coloured alkali halide crystals

    Indian Academy of Sciences (India)

    B P Chandra; M Ramrakhiani; P Sahu; A M Rastogi

    2000-02-01

    The present paper reports the correlation between deformation bleaching of coloration and mechanoluminescence (ML) in coloured alkali halide crystals. When the -centre electrons captured by moving dislocations are picked up by holes, deep traps and other compatible traps, then deformation bleaching occurs. At the same time, radiative recombination of dislocation captured electrons with the holes gives rise to the mechanoluminescence. Expressions are derived for the strain dependence of the density of colour centres in deformed crystals and also for the number of colour centres bleached. So far as strain, temperature, density of colour centres, a and volume dependence are concerned, there exists a correlation between the deformation bleaching and ML in coloured alkali halide crystals. From the strain dependence of the density of colour centres in deformed crystals, the value of coefficient of deformation bleaching is determined and it is found to be 1.93 and 2.00 for KCl and KBr crystals, respectively. The value of $(D + \\mathcal{X})$ is determined from the strain dependence of the ML intensity and it is found to be 2.6 and 3.7 for KCl and KBr crystals, respectively. This gives the value of coefficient of deformation generated compatible traps $\\mathcal{X}$ to be 0.67 and 1.7 for KCl and KBr crystals, respectively.

  4. THE EFFECTS OF HOME BLEACHING ON THE HARDNESS OF AMALGAM FILLING

    Directory of Open Access Journals (Sweden)

    Andi Soufyan

    2015-06-01

    Full Text Available Dental bleaching has been considered as a feasible approach for dental esthetic, and many dental bleaching products can be seen in the market. Therefore, the side effect of such dental product should be studied. This study was aimed to determine the effect of carbamide peroxide-containing home bleaching agent on the hardness of dental amalgam surface structure. Forty amalgam filling specimens were divided into 4 groups, which consist of 3 treatment groups and 1 controu group. Each group was exposed to the bleaching agent daily for 2, 4 and 8 hours within 7 days. The Vickers Microhardness Tester, with loads 98.07 mN for 20 seconds, was used to measure the hardness of amalgam surface. It was revealed that, there was a significant difference between the treatment and the control group on 8 hours period. It was concluded that there was a decrease in hardness of dental amalgam surface after having a contact with carbamide peroxide bleaching agent.

  5. Effectiveness of different carbamide peroxide concentrations used for tooth bleaching: an in vitro study

    Directory of Open Access Journals (Sweden)

    Sônia Saeger Meireles

    2012-04-01

    Full Text Available OBJECTIVES: This in vitro study evaluated the effectiveness of three carbamide peroxide concentrations used for tooth bleaching treatments. MATERIAL AND METHODS: Sixty bovine dental slabs (6x6x3 mm were obtained, sequentially polished, submitted to artificial staining (baseline and randomized into four groups (n=15, according to the bleaching agent concentration: distilled water (control, 10% (CP10, 16% (CP16 or 37% (CP37 carbamide peroxide. CP10 and CP16 were covered with 0.2 mL of the respective bleaching gels, which were applied on enamel surface for 4 h/day during two weeks. Samples of CP37 were covered with 0.2 mL of the bleaching gel for 20 min. The gel was light activated by two 40-s applications spaced by 10-min intervals. The gel was renewed and applied 3 times per clinical session. This cycle was repeated at 3 sessions with 5 days of interval between them. Tooth shade evaluations were done with a digital spectrophotometer at T0 (baseline, T1 (after 1-week of treatment and T2 (1-week post-bleaching. Tooth shade means were statistically analyzed by Kruskal-Wallis and Friedman's tests and color parameters were analyzed by two-way ANOVA and Tukey's test (p0.05. CONCLUSIONS: One week after the end of the treatment, all carbamide peroxide concentrations tested produced similar tooth color improvement.

  6. Clarifications, guidelines and questions about the dental bleaching "associated" with orthodontic treatment

    Directory of Open Access Journals (Sweden)

    Alberto Consolaro

    2013-10-01

    Full Text Available With regard to the best moment for carrying out or recommending dental bleaching to orthodontic patients, some explanations and orientations are given in order to answers the following questions: 1 Why orthodontic treatment completion is considered the best opportunity for carrying out the procedure? 2 Why dental bleaching should not be performed immediately before orthodontic treatment? 3 If that would be possible at any special case, what would that be? 4 Why dental bleaching should not be performed during orthodontic treatment? 5 If that would be possible at any special case, what would that be? This article highlights why it is essential to protect both the mucosa and the cervical region, regardless of the moment when dental bleaching is performed, whether associated with orthodontic treatment or not. The "how", "why" and "if" of whether or not it is convenient to perform dental bleaching before orthodontic treatment are still a matter of clinical suggestion, as it is a procedure that is under analysis, empirical knowledge waiting for scientific proof or disproof! Although tooth enamel has adamantine fluid flowing within it, providing a specific metabolism that is peculiar to its own and which could scientifically explain and base the option of carrying out teeth whitening before and during orthodontic treatment, we must still be very careful.

  7. Effect of Four Bleaching Regimens on Color Changes and Microhardness of Dental Nanofilled Composite

    Directory of Open Access Journals (Sweden)

    Vanderlei Salvador Bagnato

    2009-01-01

    Full Text Available Objective. The purpose of this study was to compare the color changes and microhardness of a nanocomposite after four bleaching regimens. Materials. Twenty-five specimens (n=25 were made with a nanocomposite resin (Filtek Supreme XT. The specimens were divided into five groups equally (n=5: bleaching groups and control group, as follows: G1: artificial saliva at 37∘C; (control G2: hydrogen peroxide (HP at 7%; G3: hydrogen peroxide (HP at 35%; G4: carbamide peroxide (CP at 10%; G5: carbamide peroxide (CP 35%. Color measurements were made with spectrophotometer using CIELAB color scale. The Vickers hardness (VHN measurements were performed at the top surface. The data were analyzed with two-way Analysis of Variance. Results. ΔE and VHN mean values into the groups were not statistically different, however, the VHN mean values before and after storage and bleaching showed statistically significant differences. Conclusion. Nanocomposite samples showed no significant alteration (color and microhardness after bleaching. Thus, no replacement of restorations is required after bleaching.

  8. Influence of whitening gel on pulp chamber temperature rise by in-office bleaching technique

    Directory of Open Access Journals (Sweden)

    Sandro Cordeiro Loretto

    Full Text Available INTRODUCTION: Dental bleaching is a conservative method for the aesthetic restoration of stained teeth. However, whitening treatments are likely to cause adverse effects when not well planned and executed. OBJECTIVE: This study evaluated the influence of whitening gel on temperature rise in the pulp chamber, using the in-office photoactivated dental bleaching technique. MATERIAL AND METHOD: The root portion of an upper central human incisor was sectioned 3mm below the cemento-enamel junction. The root canal was enlarged to permit the insertion of the K-type thermocouple sensor (MT-401 into the pulp chamber, which was filled with thermal paste to facilitate the transfer of heat during bleaching. Three photosensitive whitening agents (35% hydrogen peroxide were used: Whiteness HP (FGM, Whiteness HP Maxx (FGM and Lase Peroxide Sensy (DMC. An LED photocuring light (Flash Lite - Discus Dental was used to activate the whitening gels. Six bleaching cycles were performed on each group tested. The results were submitted to one-way ANOVA and LSD t-test (α<0.05. RESULT: The lowest mean temperature variation (ºC was detected for Lase Peroxide Sensy (0.20, while the highest was recorded for Whiteness HP (1.50. CONCLUSION: The Whiteness HP and Whiteness HP Maxx whitening gels significantly affected the temperature rise in the pulp chamber during bleaching, and this variation was dependent on the type of whitening gel used.

  9. REINFORCEMENT POTENTIAL OF BLEACHED SAWDUST KRAFT PULP IN DIFFERENT MECHANICAL PULP FURNISHES

    Directory of Open Access Journals (Sweden)

    Risto I. Korpinen

    2009-11-01

    Full Text Available Bleached unrefined and refined sawdust kraft pulps were added to bleached Norway spruce thermomechanical (TMP and pressurised groundwood (PWG pulps in different proportions. Handsheets were prepared and tested for physical properties. In addition, economic calculations were done to estimate the production costs of different bleached pulps in Finland. It was found that the addition of unrefined and refined sawdust kraft pulp improved drainability of the mechanical pulps. Tear strength of PGW furnishes was increased when either unrefined or refined sawdust pulp was added. Tear strength of TMP furnishes was not influenced when different sawdust kraft pulps were added. Up to 30 % of unrefined sawdust kraft pulp could be added and no significant negative effect was observed in TMP and PGW furnishes. On the other hand, when refined sawdust kraft pulp was added into the mechanical pulp furnishes, a clear improvement in the tensile strength was observed. According to the economic calculation the production cost of bleached sawdust kraft pulp is almost as low as the production cost of bleached mechanical pulp. We suggest that economically viable sawdust kraft pulp can be used as a substituent for expensive long fibre reinforcement kraft pulp in the production of mechanical pulp based papers.

  10. Effect of tooth bleaching agents on protein content and mechanical properties of dental enamel.

    Science.gov (United States)

    Elfallah, Hunida M; Bertassoni, Luiz E; Charadram, Nattida; Rathsam, Catherine; Swain, Michael V

    2015-07-01

    This study investigated the effect of two bleaching agents, 16% carbamide peroxide (CP) and 35% hydrogen peroxide (HP), on the mechanical properties and protein content of human enamel from freshly extracted teeth. The protein components of control and treated enamel were extracted and examined on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Marked reduction of the protein matrix and random fragmentation of the enamel proteins after bleaching treatments was found. The mechanical properties were analyzed with Vickers indentations to characterize fracture toughness, and nanoindentation to establish enamel hardness, elastic modulus and creep deformation. Results indicate that the hardness and elastic modulus of enamel were significantly reduced after treatment with CP and HP. After bleaching, the creep deformation at maximum load increased and the recovery upon unloading reduced. Crack lengths of CP and HP treated enamel were increased, while fracture toughness decreased. Additionally, the microstructures of fractured and indented samples were examined with field emission gun scanning electron microscopy (FEG-SEM) showing distinct differences in the fracture surface morphology between pre- and post-bleached enamel. In conclusion, tooth bleaching agents can produce detrimental effects on the mechanical properties of enamel, possibly as a consequence of damaging or denaturing of its protein components.

  11. Effect of tooth-bleaching on the carbonate concentration in dental enamel by Raman spectroscopy

    Science.gov (United States)

    Vargas-Koudriavtsev, Tatiana; Herrera-Sancho, Óscar-Andrey

    2017-01-01

    Background There are not many studies evaluating the effects of surface treatments at the molecular level. The aim of this in vitro study was to analyze the concentration of carbonate molecules in dental enamel by Raman spectroscopy after the application of in-office and home whitening agents. Material and Methods Sixty human teeth were randomly divided into six groups and exposed to three different home bleaching gels (Day White) and three in-office whitening agents (Zoom! Whitespeed and PolaOffice) according to the manufacturer´s instructions. The concentration of carbonate molecules in enamel was measured prior to and during the treatment by means of Raman spectroscopy. Statistical analysis included repeated measures analysis of variance (p≤0.05) and Bonferroni pairwise comparisons. Results At home bleaching agents depicted a decrease in the carbonate molecule. This decrease was statistically significant for the bleaching gel with the highest hydrogen peroxide concentration (p≤0,05). In-office whitening agents caused an increase in carbonate, which was significant for all three groups (p≤0,05). Conclusions In-office bleaching gels seem to cause a gain in carbonate of the enamel structure, whilst at-home whitening gels caused a loss in carbonate. Key words:Bleaching, whitening, hydrogen peroxide, carbamide peroxide, Raman spectroscopy, carbonate.

  12. Erosion and abrasion on dental structures undergoing at-home bleaching

    Directory of Open Access Journals (Sweden)

    Tarquinio SBC

    2011-07-01

    Full Text Available Flávio Fernando Demarco1, Sônia Saeger Meireles2, Hugo Ramalho Sarmento1, Raquel Venâncio Fernandes Dantas1, Tatiana Botero3, Sandra Beatriz Chaves Tarquinio11Graduate Program in Dentistry, School of Dentistry, Federal University of Pelotas, Brazil; 2Department of Operative Dentistry, Federal University of Paraíba, Brazil; 3Cariology, Restorative Science, and Endodontics Department, School of Dentistry, University of Michigan, MI, USAAbstract: This review investigates erosion and abrasion in dental structures undergoing at-home bleaching. Dental erosion is a multifactorial condition that may be idiopathic or caused by a known acid source. Some bleaching agents have a pH lower than the critical level, which can cause changes in the enamel mineral content. Investigations have shown that at-home tooth bleaching with low concentrations of hydrogen or carbamide peroxide have no significant damaging effects on enamel and dentin surface properties. Most studies where erosion was observed were in vitro. Even though the treatment may cause side effects like sensitivity and gingival irritation, these usually disappear at the end of treatment. Considering the literature reviewed, we conclude that tooth bleaching agents based on hydrogen or carbamide peroxide have no clinically significant influence on enamel/dentin mineral loss caused by erosion or abrasion. Furthermore, the treatment is tolerable and safe, and any adverse effects can be easily reversed and controlled.Keywords: peroxide, tooth bleaching, enamel, dentin, erosion, abrasion

  13. Effect of temperature and concentration on benzoyl peroxide bleaching efficacy and benzoic acid levels in whey protein concentrate.

    Science.gov (United States)

    Smith, T J; Gerard, P D; Drake, M A

    2015-11-01

    Much of the fluid whey produced in the United States is a by-product of Cheddar cheese manufacture and must be bleached. Benzoyl peroxide (BP) is currently 1 of only 2 legal chemical bleaching agents for fluid whey in the United States, but benzoic acid is an unavoidable by-product of BP bleaching. Benzoyl peroxide is typically a powder, but new liquid BP dispersions are available. A greater understanding of the bleaching characteristics of BP is necessary. The objective of the study was to compare norbixin destruction, residual benzoic acid, and flavor differences between liquid whey and 80% whey protein concentrates (WPC80) bleached at different temperatures with 2 different benzoyl peroxides (soluble and insoluble). Two experiments were conducted in this study. For experiment 1, 3 factors (temperature, bleach type, bleach concentration) were evaluated for norbixin destruction using a response surface model-central composite design in liquid whey. For experiment 2, norbixin concentration, residual benzoic acid, and flavor differences were explored in WPC80 from whey bleached by the 2 commercially available BP (soluble and insoluble) at 5 mg/kg. In liquid whey, soluble BP bleached more norbixin than insoluble BP, especially at lower concentrations (5 and 10 mg/kg) at both cold (4°C) and hot (50°C) temperatures. The WPC80 from liquid whey bleached with BP at 50°C had lower norbixin concentration, benzoic acid levels, cardboard flavor, and aldehyde levels than WPC80 from liquid whey bleached with BP at 4°C. Regardless of temperature, soluble BP destroyed more norbixin at lower concentrations than insoluble BP. The WPC80 from soluble-BP-bleached wheys had lower cardboard flavor and lower aldehyde levels than WPC80 from insoluble-BP-bleached whey. This study suggests that new, soluble (liquid) BP can be used at lower concentrations than insoluble BP to achieve equivalent bleaching and that less residual benzoic acid remains in WPC80 powder from liquid whey

  14. Selective visualization of fluorescent sterols in Caenorhabditis elegans by bleach-rate-based image segmentation

    DEFF Research Database (Denmark)

    Wüstner, Daniel; Landt Larsen, Ane; Færgeman, Nils J.

    2010-01-01

    The nematode Caenorhabditis elegans is a genetically tractable model organism to investigate sterol transport. In vivo imaging of the fluorescent sterol, dehydroergosterol (DHE), is challenged by C. elegans' high autofluorescence in the same spectral region as emission of DHE. We present a method...... to detect DHE selectively, based on its rapid bleaching kinetics compared to cellular autofluorescence. Worms were repeatedly imaged on an ultraviolet-sensitive wide field (UV-WF) microscope, and bleaching kinetics of DHE were fitted on a pixel-basis to mathematical models describing the intensity decay...... autofluorescence and compare our method with three-photon excitation microscopy of sterol in selected tissues. Bleach-rate-based UV-WF imaging is a useful tool for genetic screening experiments on sterol transport, as exemplified by RNA interference against the rme-2 gene coding for the yolk receptor and for worm...

  15. Geochemical Records of Bleaching Events and the Associated Stressors From the Great Barrier Reef

    Science.gov (United States)

    Roark, E. B.; McCulloch, M.; Ingram, B. L.; Marshall, J. F.

    2003-12-01

    The health of coral reefs world-wide is increasingly threatened by a wide array of stressors. On the Great Barrier Reef (GBR) these stressors include increased sediment flux associated with land use changes, increased sea surface temperatures (SST) and salinity changes due to large floods, the latter two of which are factors in an increased number of bleaching events. The ability to document long-term change in these stressors along with changes in the number of bleaching events would help discern what are natural and anthropogenic changes in this ecosystem. Here we present results of an initial calibration effort aimed at identifying bleaching events and the associated stressors using stable isotopic and trace element analysis in coral cores. Three ˜15-year time series of geochemical measurements (δ 13C, δ 18O, and Sr/Ca) on Porites coral cores obtained from Pandora Reef and the Keppel Islands on the GBR have been developed at near weekly resolution. Since the δ 13C of the coral skeletal carbonate is known to be affected by both environmental factors (e.g. insolation and temperature) and physiological factors (e.g. photosynthesis, calcification, and the statues of the symbiotic relationship between corals and zooxanthellae) it is the most promising proxy for reconstructing past bleaching events. The first record (PAN-98) comes from a coral head that had undergone bleaching and died shortly after the large-scale bleaching events on Pandora Reef in 1998. A second core (PAN-02) was collected from a living coral within 10m of PAN-98 in 2002. Sr/Ca ratios in both cores tracked even the smallest details of an in situ SST record. The increase in SST that occurred three to four weeks prior to bleaching was faithfully recorded by a similar decrease in the Sr/Ca ratio in PAN-98, indicating that calcification continued despite the high SST of 30-31° C. The δ 13C values decreased by about 5‰ , one week after the SST increase, and remained at this value for about 4

  16. TCF bleaching sequence in kraft pulping of olive tree pruning residues.

    Science.gov (United States)

    Requejo, A; Rodríguez, A; Colodette, J L; Gomide, J L; Jiménez, L

    2012-08-01

    The aim of the present work was to find a suitable Kraft cooking process for olive tree pruning (OTP), in order to produce pulp of kappa number about 17. The Kraft pulp produced under optimized conditions showed a viscosity of 31.5 mPa·s and good physical, mechanical, and optical properties, which are suitable for paper production. The physical-mechanical and optical properties were measured before and after bleaching. Although the OTP pulp was bleached to 90.9% ISO brightness (kappapulp showed a brightness reversion equal to 1.3%. Furthermore, this bleached pulp did not need a high intensity of beating due to high drainability degree in the unbeaten pulp. So that, OTP is suggested as an interesting raw material for cellulosic pulp production because its properties are comparable to those of other agricultural residues, currently used in the paper industry.

  17. FRACTURE RESISTANCE AND FAILURE PATTERN OF TEETH SUBMITTED TO INTERNAL BLEACHING WITH 37% CARBAMIDE PEROXIDE, WITH APPLICATION OF DIFFERENT RESTORATIVE PROCEDURES

    OpenAIRE

    Gerson Bonfante; Osvaldo Bazzan Kaizer; Luiz Fernando Pegoraro; Accácio Lins do Valle

    2006-01-01

    OBJECTIVE: This study investigated the compressive fracture strength and failure pattern in premolars submitted to endodontic treatment and internal bleaching with 37% carbamide peroxide for 21 days, with application of different restorative procedures. MATERIAL AND METHODS: Six groups were employed (n = 10): 1) non-bleached teeth and pulp chamber sealed with IRM; 2) bleached teeth and pulp chamber sealed with IRM; 3) bleached teeth and pulp chamber filled with light cured composite resin; 4)...

  18. Monitoring Coral Health to Determine Coral Bleaching Response at High Latitude Eastern Australian Reefs: An Applied Model for A Changing Climate

    OpenAIRE

    Carroll, Andrew G; Dalton, Steven J.

    2011-01-01

    Limited information is available on the bleaching susceptibility of coral species that dominate high latitude reefs along the eastern seaboard of Australia. The main aims of this study were to: (i) monitor coral health and spatial patterns of coral bleaching response at the Solitary Islands Marine Park (SIMP) and Lord Howe Island Marine Park (LHIMP), to determine variability of bleaching susceptibility among coral taxa; (ii) predict coral bleaching thresholds at 30 °S and 31.5 °S, extrapolate...

  19. Spatial and temporal patterns of coral bleaching around Buck Island Reef National Monument, St. Croix, U.S. Virgin Islands [poster

    OpenAIRE

    Randall D Clark; Jeffrey, Christopher F. G.; Woody, Kimberly; Hillis-Starr, Zandy

    2008-01-01

    Limited information currently exists on the recovery periods of bleached corals as well as the spatial extent, causative factors, and the overall impact of bleaching on coral reef ecosystems. During October, 2005, widespread coral bleaching was observed within Buck Island Reef National Monument (BUIS) St. Croix, USVI. The bleaching event was preceded by 10 weeks of higher than average water temperatures (28.9-30.1°C). Random transects (100 square meters) over hard bottom habitats (N=94) revea...

  20. Efficacy, side-effects and patients' acceptance of different bleaching techniques (OTC, in-office, at-home).

    NARCIS (Netherlands)

    Auschill, T.M.; Hellwig, E.; Schmidale, S.; Sculean, A.; Arweiler, N.B.

    2005-01-01

    This clinical study compared the efficacy of three different bleaching techniques with respect to the bleaching times required in order to achieve six grades of whitening in human teeth. Any side effects that were noted and the patients' acceptance of the method were recorded by a visual analog scal

  1. Relationship between anthropogenic impacts and bleaching-associated tissue mortality of corals in Curaçao (Netherlands Antilles)

    NARCIS (Netherlands)

    Nagelkerken, I.

    2007-01-01

    Chronic anthropogenic impacts can have a negative effect on coral health and on coral energy budgets needed for regeneration of lesions. I therefore hypothesise that during massive bleaching events, the degree of corals showing bleaching-related tissue mortality is higher in areas subject to chronic

  2. Effect of various antioxidants on the shear bond strength of composite resin to bleached enamel: An in vitro study

    Directory of Open Access Journals (Sweden)

    Mageshwaran Thandalam Arumugam

    2014-01-01

    Full Text Available Objective: The aim of this in vitro study was to evaluate and compare the effect of 10% sodium ascorbate, 6.5% proanthocyanidin, and 5% lycopene on the bond strength of composite resin to bleached enamel. Materials and Methods: Labial enamel surfaces of 100 extracted human maxillary central incisors were used in this study. Twenty teeth served as group I (control and received no bleaching treatment. The remaining 80 teeth were randomly divided into four groups of 20 teeth each, based on the antioxidant used as follows: group II- bleaching with 35% carbamide peroxide gel for 30 min without the use of an antioxidant, group III- bleaching followed by use of 10% sodium ascorbate solution, group IV- bleaching followed by use of 6.5% proanthocyanidin, and group V- bleaching followed by use of 5% lycopene. These groups were further subdivided into two subgroups of 10 teeth each, based on whether composite buildup was done immediately (subgroup A or after a delay of 2 weeks (subgroup B post bleaching. Shear bond strength of the specimens was tested under universal testing machine. The data were tabulated and statistically analyzed. Results: Significantly higher shear bond strength values were observed in teeth treated with control group prior to bonding, followed by sodium ascorbate group. Conclusion: Within the limitations of this study, it can be concluded all the antioxidants used in this study increased the bond strength of bleached enamel. Among the antioxidant groups, sodium ascorbate showed significantly higher bond strength compared to proanthocyanidin and lycopene.

  3. Resin Bonding of Self-Etch Adhesives to Bovine Dentin Bleached from Pulp Chamber

    Science.gov (United States)

    Haruyama, Akiko; Kato, Junji; Takemoto, Shinji; Oda, Yutaka; Kawada, Eiji; Takahashi, Toshiyuki; Furusawa, Masahiro

    2016-01-01

    This study evaluated the microtensile bond strength (μTBS) of 1-step self-etch adhesives (1-SEAs) and 2-step self-etch adhesives (2-SEAs) to pulp chamber dentin immediately after bleaching with 2 types of common bleaching techniques. Pulp chamber dentin of bovine teeth was bleached using 30% hydrogen peroxide (H2O2) solution with quartz-tungsten-halogen light-curing unit (Group 1) and 3.5% H2O2-containing titanium dioxide (TiO2) (Pyrenees®) activated with 405-nm violet diode laser for 15 min (Group 2). Unbleached specimens were placed in distilled water for 15 min and used as controls. After treatment, dentin was bonded with resin composite using 1-SEA or 2-SEA and stored in water at 37°C for 24 h. Each specimen was sectioned and trimmed to an hourglass-shape and μTBS was measured. Fractured specimens were examined under a scanning electron microscope to determine fracture modes. All specimens in Group 1 failed before proper bonding tests. In Group 2, the μTBS of 2-SEA was significantly greater (with no failed specimens) than 1-SEA (where 21 out of 36 failed). These results indicate that 2-SEA is a better adhesive system than 1-SEA on bleached dentin. Our results also demonstrated that application of H2O2 significantly decreases bond strength of resin to dentin; however, in the case of nonvital tooth bleaching, Pyrenees® is a better alternative to the conventional 30% H2O2 bleaching. PMID:27747220

  4. The influence of desensitizing dentifrices on pain induced by in-office bleaching.

    Science.gov (United States)

    Thiesen, Carlos Henrique; Rodrigues Filho, Rubens; Prates, Luiz Henrique Maykot; Sartori, Neimar

    2013-01-01

    The purpose of this study was to evaluate whether the use of desensitizing dentifrices used 15 days prior to and after in-office tooth bleaching could eliminate or reduce tooth sensitivity. After institutional review board approval and informed consent, 45 subjects were selected and divided into 3 groups according to the dentifrice selected: Colgate Total (CT), Colgate Sensitive Pro-Relief (CS) or Sensodyne ProNamel (SP). The subjects used toothpaste and a toothbrush provided to them for 15 days prior to bleaching. They were then submitted to two in-office bleaching sessions (Whiteness HP Blue Calcium). Their tooth sensitivity was assessed using the Visual Analog Scale (VAS) for a week after each session. Their tooth shade alteration was measured with a Vitapan Classical shade guide to determine if the dentifrices could influence the effectiveness of the bleaching agent. The data were submitted to Wilcoxon, Kruskal-Wallis and Mann-Whitney tests (α = 0.05). The use of desensitizing dentifrices did not affect the bleaching efficacy. In regard to tooth sensitivity, there was a statistically significant difference between the results of the Control Group and Group T2 after the first session (p = 0.048). There was no statistically significant difference in the results for the other groups after the first session. In regard to the second session, there was no statistically significant difference in the results for all the groups. The use of a desensitizing dentifrice containing nitrate potassium reduced tooth sensitivity during the bleaching regimen. Dentifrices containing arginine and calcium carbonate did not reduce tooth sensitivity. Color change was not influenced by the dentifrices used.

  5. The influence of desensitizing dentifrices on pain induced by in-office bleaching

    Directory of Open Access Journals (Sweden)

    Carlos Henrique Thiesen

    2013-12-01

    Full Text Available The purpose of this study was to evaluate whether the use of desensitizing dentifrices used 15 days prior to and after in-office tooth bleaching could eliminate or reduce tooth sensitivity. After institutional review board approval and informed consent, 45 subjects were selected and divided into 3 groups according to the dentifrice selected: Colgate Total (CT, Colgate Sensitive Pro-Relief (CS or Sensodyne ProNamel (SP. The subjects used toothpaste and a toothbrush provided to them for 15 days prior to bleaching. They were then submitted to two in-office bleaching sessions (Whiteness HP Blue Calcium. Their tooth sensitivity was assessed using the Visual Analog Scale (VAS for a week after each session. Their tooth shade alteration was measured with a Vitapan Classical shade guide to determine if the dentifrices could influence the effectiveness of the bleaching agent. The data were submitted to Wilcoxon, Kruskal-Wallis and Mann-Whitney tests (α = 0.05. The use of desensitizing dentifrices did not affect the bleaching efficacy. In regard to tooth sensitivity, there was a statistically significant difference between the results of the Control Group and Group T2 after the first session (p = 0.048. There was no statistically significant difference in the results for the other groups after the first session. In regard to the second session, there was no statistically significant difference in the results for all the groups. The use of a desensitizing dentifrice containing nitrate potassium reduced tooth sensitivity during the bleaching regimen. Dentifrices containing arginine and calcium carbonate did not reduce tooth sensitivity. Color change was not influenced by the dentifrices used

  6. Patterns of gene expression in a scleractinian coral undergoing natural bleaching.

    Science.gov (United States)

    Seneca, Francois O; Forêt, Sylvain; Ball, Eldon E; Smith-Keune, Carolyn; Miller, David J; van Oppen, Madeleine J H

    2010-10-01

    Coral bleaching is a major threat to coral reefs worldwide and is predicted to intensify with increasing global temperature. This study represents the first investigation of gene expression in an Indo-Pacific coral species undergoing natural bleaching which involved the loss of algal symbionts. Quantitative real-time polymerase chain reaction experiments were conducted to select and evaluate coral internal control genes (ICGs), and to investigate selected coral genes of interest (GOIs) for changes in gene expression in nine colonies of the scleractinian coral Acropora millepora undergoing bleaching at Magnetic Island, Great Barrier Reef, Australia. Among the six ICGs tested, glyceraldehyde 3-phosphate dehydrogenase and the ribosomal protein genes S7 and L9 exhibited the most constant expression levels between samples from healthy-looking colonies and samples from the same colonies when severely bleached a year later. These ICGs were therefore utilised for normalisation of expression data for seven selected GOIs. Of the seven GOIs, homologues of catalase, C-type lectin and chromoprotein genes were significantly up-regulated as a result of bleaching by factors of 1.81, 1.46 and 1.61 (linear mixed models analysis of variance, P coral bleaching response genes. In contrast, three genes, including one putative ICG, showed highly variable levels of expression between coral colonies. Potential variation in microhabitat, gene function unrelated to the stress response and individualised stress responses may influence such differences between colonies and need to be better understood when designing and interpreting future studies of gene expression in natural coral populations.

  7. Metabolites of chlorinated syringaldehydes in fish bile as biomarkers of exposure to bleached eucalypt pulp effluents.

    Science.gov (United States)

    Brumley, C M; Haritos, V S; Ahokas, J T; Holdway, D A

    1996-04-01

    Metabolites of chlorinated phenolic compounds in fish bile have been found to be sensitive biomarkers of bleached pulp mill effluent exposure. Chlorinated syringaldehydes are largely unstudied chlorophenolics found in bleached hardwood effluent. Sand flathead (Platycephalus bassensis), Australian marine fish, were exposed to 100% chlorine dioxide-bleached eucalypt pulp effluent at concentrations of 0.5, 2, and 8% (v/v) for 4 days. Metabolites of 2-chlorosyringaldehyde (2-CSA), the predominant chlorophenolic in this effluent, were measured in the bile. The major metabolite was the conjugate of 2-chloro-4-hydroxy-3,5-dimethoxy-benzylalcohol (2-CB-OH), the reduced product of 2-CSA. 2-CB-OH was found in all fish exposed to diluted effluent and was concentrated in the bile over 1000 times above 2-CSA levels in the effluent. A separate experiment examined the metabolic fate of 2,6-dichlorosyringaldehyde (2,6-DCSA), which is one of the major chlorophenolics in chlorine-bleached eucalypt pulp effluent. Sand flathead were exposed to 2,6-DCSA by intraperitoneal injection at 15 mg/kg or through the water to 0.5, 2, or 8 micrograms/liter for 4 days. Analysis of the bile revealed the major metabolite of 2,6-DCSA to be the conjugate of 2,6-dichloro-4-hydroxy-3,5-dimethoxybenzylalcohol, which was found in all exposed fish and was concentrated in the bile over 20,000 times above 2,6-DCSA exposure levels. Results reveal that the analysis of metabolites of chlorinated syringaldehydes in fish bile can provide a biomarker of bleached hardwood effluent exposure that is sensitive to low levels of exposure, specific to certain bleaching sequences, and correlates well with exposure concentrations.

  8. Application of 10% Ascorbic Acid Improves Resin Shear Bond Stregth in Bleached Dentin

    Directory of Open Access Journals (Sweden)

    Kamizar Kamizar

    2014-10-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Restoration of the teeth immediately after bleaching with H2O2 35% is contraindicated due to the remnants of free radical that will stay inside dentin for 2-3 weeks which will compromise the adhesiveness of composite resin. Objective: The aim of this study was to evaluate the influence of 10% ascorbic acid on shear bond strength of composite placed on bleached dentin. Methods:Twenty seven samples were divided equally into three groups. Group 1: dentin was etched with 35% phosphoric acid; Group 2: dentin was bleached with 35% H2O2 followed by etching with 35% phosphoric acid; Group 3: dentin was bleached with 35% H2O2, followed by application of 10% ascorbic acid and etched with 35% phosphoric acid. All samples were then stored at 370C for 24 hours. The Universal Testing Machine was used to measure shear bond strength and the results were analyzed with Kruskal Wallis and Mann Whitney test. Results: After nine independent experiments, 10% ascorbic acid application on bleached dentin resulted in highest increased in bond stregth (56.04±11.06MPa compared to Group 2 (29.09±7.63MPa and Group 1 (25.55±2.22MPa and the difference was statistically significant (p<0.05. Conclusion: Application of 10% ascorbic acid to the bleached dentin improved the shear bond strength of resin composite.

  9. Resin Bonding of Self-Etch Adhesives to Bovine Dentin Bleached from Pulp Chamber.

    Science.gov (United States)

    Haruyama, Akiko; Kameyama, Atsushi; Kato, Junji; Takemoto, Shinji; Oda, Yutaka; Kawada, Eiji; Takahashi, Toshiyuki; Furusawa, Masahiro

    2016-01-01

    This study evaluated the microtensile bond strength (μTBS) of 1-step self-etch adhesives (1-SEAs) and 2-step self-etch adhesives (2-SEAs) to pulp chamber dentin immediately after bleaching with 2 types of common bleaching techniques. Pulp chamber dentin of bovine teeth was bleached using 30% hydrogen peroxide (H2O2) solution with quartz-tungsten-halogen light-curing unit (Group 1) and 3.5% H2O2-containing titanium dioxide (TiO2) (Pyrenees®) activated with 405-nm violet diode laser for 15 min (Group 2). Unbleached specimens were placed in distilled water for 15 min and used as controls. After treatment, dentin was bonded with resin composite using 1-SEA or 2-SEA and stored in water at 37°C for 24 h. Each specimen was sectioned and trimmed to an hourglass-shape and μTBS was measured. Fractured specimens were examined under a scanning electron microscope to determine fracture modes. All specimens in Group 1 failed before proper bonding tests. In Group 2, the μTBS of 2-SEA was significantly greater (with no failed specimens) than 1-SEA (where 21 out of 36 failed). These results indicate that 2-SEA is a better adhesive system than 1-SEA on bleached dentin. Our results also demonstrated that application of H2O2 significantly decreases bond strength of resin to dentin; however, in the case of nonvital tooth bleaching, Pyrenees® is a better alternative to the conventional 30% H2O2 bleaching.

  10. Resin Bonding of Self-Etch Adhesives to Bovine Dentin Bleached from Pulp Chamber

    Directory of Open Access Journals (Sweden)

    Akiko Haruyama

    2016-01-01

    Full Text Available This study evaluated the microtensile bond strength (μTBS of 1-step self-etch adhesives (1-SEAs and 2-step self-etch adhesives (2-SEAs to pulp chamber dentin immediately after bleaching with 2 types of common bleaching techniques. Pulp chamber dentin of bovine teeth was bleached using 30% hydrogen peroxide (H2O2 solution with quartz-tungsten-halogen light-curing unit (Group 1 and 3.5% H2O2-containing titanium dioxide (TiO2 (Pyrenees® activated with 405-nm violet diode laser for 15 min (Group 2. Unbleached specimens were placed in distilled water for 15 min and used as controls. After treatment, dentin was bonded with resin composite using 1-SEA or 2-SEA and stored in water at 37°C for 24 h. Each specimen was sectioned and trimmed to an hourglass-shape and μTBS was measured. Fractured specimens were examined under a scanning electron microscope to determine fracture modes. All specimens in Group 1 failed before proper bonding tests. In Group 2, the μTBS of 2-SEA was significantly greater (with no failed specimens than 1-SEA (where 21 out of 36 failed. These results indicate that 2-SEA is a better adhesive system than 1-SEA on bleached dentin. Our results also demonstrated that application of H2O2 significantly decreases bond strength of resin to dentin; however, in the case of nonvital tooth bleaching, Pyrenees® is a better alternative to the conventional 30% H2O2 bleaching.

  11. Coral bleaching indices and thresholds for the Florida Reef Tract, Bahamas, and St. Croix, US Virgin Islands.

    Science.gov (United States)

    Manzello, Derek P; Berkelmans, Ray; Hendee, James C

    2007-12-01

    It is well established that elevated sea temperatures cause widespread coral bleaching, yet confusion lingers as to what facet of extreme temperatures is most important. Utilizing long-term in situ datasets, we calculated nine thermal stress indices and tested their effectiveness at segregating bleaching years a posteriori for multiple reefs on the Florida Reef Tract. The indices examined represent three aspects of thermal stress: (1) short-term, acute temperature stress; (2) cumulative temperature stress; and (3) temperature variability. Maximum monthly sea surface temperature (SST) and the number of days >30.5 degrees C were the most significant; indicating that cumulative exposure to temperature extremes characterized bleaching years. Bleaching thresholds were warmer for Florida than the Bahamas and St. Croix, US Virgin Islands reflecting differences in seasonal maximum SST. Hind-casts showed that monthly mean SST above a local threshold explained all bleaching years in Florida, the Bahamas, and US Virgin Islands.

  12. Differential nitric oxide synthesis and host apoptotic events correlate with bleaching susceptibility in reef corals

    Science.gov (United States)

    Hawkins, T. D.; Krueger, T.; Becker, S.; Fisher, P. L.; Davy, S. K.

    2014-03-01

    Coral bleaching poses a threat to coral reefs worldwide. As a consequence of the temperature-induced breakdown in coral-dinoflagellate symbiosis, bleaching can have extensive effects on reef communities. However, our understanding of bleaching at a cellular level is limited, and this is particularly true regarding differential susceptibility among coral species. Recent work suggests that bleaching may represent a host innate immune-like response to symbiont dysfunction that involves synthesis of the signalling compound nitric oxide (NO) and the induction of host apoptotic-like cell death. In this study, we examined the activity of apoptosis-regulating enzymes alongside oxidised NO accumulation (a proxy for NO synthesis) in the reef corals Acropora millepora, Montipora digitata, and Pocillopora damicornis during experimental thermal stress. P. damicornis was the most sensitive species, suffering mortality (tissue sloughing) after 5 days at 33 °C but non-lethal bleaching after 9 days at 31.5 °C. A. millepora bleached at 33 °C but remained structurally intact, while M. digitata showed little evidence of bleaching. P. damicornis and A. millepora both exhibited evidence of temperature-induced NO synthesis and, after 5 days of heating, levels of oxidised NO in both species were fivefold higher than in controls maintained at 28.5 °C. These responses preceded bleaching by a number of days and may have occurred before symbiont dysfunction (measured as chlorophyll a degradation and oxidised NO accumulation). In A. millepora, apparent NO synthesis correlated with the induction of host apoptotic-like pathways, while in P. damicornis, the upregulation of apoptotic pathways occurred later. No evidence of elevated NO production or apoptosis was observed in M. digitata at 33 °C and baseline activity of apoptosis-regulating enzymes was negligible in this species. These findings provide important physiological data in the context of the responses of corals to global change and

  13. Histological observations in the Hawaiian reef coral, Porites compressa, affected by Porites bleaching with tissue loss.

    Science.gov (United States)

    Sudek, M; Work, T M; Aeby, G S; Davy, S K

    2012-10-01

    The scleractinian finger coral Porites compressa is affected by the coral disease Porites bleaching with tissue loss (PBTL). This disease initially manifests as bleaching of the coenenchyme (tissue between polyps) while the polyps remain brown with eventual tissue loss and subsequent algal overgrowth of the bare skeleton. Histopathological investigation showed a loss of symbiont and melanin-containing granular cells which was more pronounced in the coenenchyme than the polyps. Cell counts confirmed a 65% reduction in symbiont density. Tissue loss was due to tissue fragmentation and necrosis in affected areas. In addition, a reduction in putative bacterial aggregate densities was found in diseased samples but no potential pathogens were observed.

  14. Coral bleaching and ocean ''hot spots''

    Energy Technology Data Exchange (ETDEWEB)

    Goreau, T.J. (Global Coral Reef Alliance, Chappaqua, NY (United States)); Hayes, R.L. (Howard Univ., Washington, DC (United States). College of Medicine)

    1994-05-01

    Global sea-surface temperature maps show that mass coral-reef bleaching episodes between 1983 and 1991 followed positive anomalies more than 1 deg C above long-term monthly averages (''hot spots'') during the preceding warm season. Irregular formation, movement, and disappearance of hot spots make their detailed long-term prediction impossible, but they can be tracked in real time from satellite data. Monitoring of ocean hot spots and of coral bleaching is needed if the Framework Convention of Climate Change is to meet its goal of protecting the most temperature sensitive ecosystems. 47 refs, 3 figs

  15. Histological observations in the Hawaiian reef coral, Porites compressa, affected by Porites bleaching with tissue loss

    Science.gov (United States)

    Sudek, M.; Work, T.M.; Aeby, G.S.; Davy, S.K.

    2012-01-01

    The scleractinian finger coral Porites compressa is affected by the coral disease Porites bleaching with tissue loss (PBTL). This disease initially manifests as bleaching of the coenenchyme (tissue between polyps) while the polyps remain brown with eventual tissue loss and subsequent algal overgrowth of the bare skeleton. Histopathological investigation showed a loss of symbiont and melanin-containing granular cells which was more pronounced in the coenenchyme than the polyps. Cell counts confirmed a 65% reduction in symbiont density. Tissue loss was due to tissue fragmentation and necrosis in affected areas. In addition, a reduction in putative bacterial aggregate densities was found in diseased samples but no potential pathogens were observed.

  16. Effects of home bleaching on surface hardness and surface roughness of an experimental nanocomposite

    OpenAIRE

    Ab-Ghani Zuryati; Ooi Qian Qian; Mohamad Dasmawati

    2013-01-01

    Objective: Home bleaching agents may not be safe for composite resins. The purpose of this study was to evaluate the effects of 10 and 20% Opalescence ® PF home bleaching agents on the surface roughness and hardness of universal nanocomposite (Filtek Z350), anterior nanocomposite (KeLFiL), and nanohybrid composite (TPH 3). Materials and Methods: Fifty-four composite resin samples with 18 samples for each type of composite resin were prepared using acrylic molds (4 × 2 mm). Each type of co...

  17. Shear Bond Strength of Two Types of Glass Ionomer to Bleached Dentin: Effect of Delayed Bonding and Antioxidant Agent

    Science.gov (United States)

    Omrani, Ladan Ranjbar; Sabouri, Parastoo; Abbasi, Mehdi; Ahmadi, Elham; Ghavam, Maryam

    2016-01-01

    Background: Studies have shown a reduction in bond strength of composites and glass ionomer to bleached enamel and dentin. Several methods have been proposed to reverse compromised bond strength. Objective: The aim of this study was to evaluate the effect of delayed bonding and application of antioxidant agent on the bond strength of reinforced self-cured (Fuji IX) and light-cured glass ionomers (Fuji II LC) to bleached dentin. Material: Eighty extracted third molars were randomly divided into 8 groups. Buccal dentin surfaces received different treatments: Two control groups: no treatment + bonding Fuji IX or Fuji II LC. Two immediate bonding groups: bleaching + bonding Fuji IX or Fuji II LC. Two delayed bonding groups: bleaching + 7 days delay + bonding Fuji IX or Fuji II LC. Two sodium ascorbate application groups: Bleaching + application of 10% sodium ascorbate + bonding Fuji IX or Fuji II LC. All samples were tested for shear bond strength. Two-way analysis of variance (ANOVA) was used to compare the mean and standard deviations among groups, followed by the Tukey’s test for significant interaction. Results: No statistically significant difference was detected in shear bond strength of Fuji IX to bleached or normal dentin. Although a significant reduction was found shear bond strength values of Fuji II LC to bleached dentin, no significant difference was observed between no bleaching group and those treated with 10% sodium ascorbate or 7 days of delay in bonding for both types of glass ionomer. Conclusion: Bleaching had no significant effect on shear bond strength of Fuji IX to dentin; this type of GI can be used immediately after bleaching. PMID:28217187

  18. Bleaching susceptibility and recovery of Colombian Caribbean corals in response to water current exposure and seasonal upwelling.

    Science.gov (United States)

    Bayraktarov, Elisa; Pizarro, Valeria; Eidens, Corvin; Wilke, Thomas; Wild, Christian

    2013-01-01

    Coral bleaching events are globally occurring more frequently and with higher intensity, mainly caused by increases in seawater temperature. In Tayrona National Natural Park (TNNP) in the Colombian Caribbean, local coral communities are subjected to seasonal wind-triggered upwelling events coinciding with stronger water currents depending on location. This natural phenomenon offers the unique opportunity to study potential water current-induced mitigation mechanisms of coral bleaching in an upwelling influenced region. Therefore, coral bleaching susceptibility and recovery patterns were compared during a moderate and a mild bleaching event in December 2010 and 2011, and at the end of the subsequent upwelling periods at a water current-exposed and -sheltered site of an exemplary bay using permanent transect and labeling tools. This was accompanied by parallel monitoring of key environmental variables. Findings revealed that in 2010 overall coral bleaching before upwelling was significantly higher at the sheltered (34%) compared to the exposed site (8%). Whereas 97% of all previously bleached corals at the water current-exposed site had recovered from bleaching by April 2011, only 77% recovered at the sheltered site, but 12% had died there. In December 2011, only mild bleaching (corals recovered significantly at both sites in the course of upwelling. No differences in water temperatures between sites occurred, but water current exposure and turbidity were significantly higher at the exposed site, suggesting that these variables may be responsible for the observed site-specific mitigation of coral bleaching. This indicates the existence of local resilience patterns against coral bleaching in Caribbean reefs.

  19. Comparisons of the 1995 and 1998 coral bleaching events on the patch reefs of San Salvador Island, Bahamas.

    Science.gov (United States)

    McGrath, Thomas A; Smith, Garriet W

    2003-06-01

    Coral patch reefs around San Salvador Island, Bahamas have been monitored with the aid of Earthwatch volunteers three times a year since 1992. During that period two significant mass bleaching events occurred: autumn 1995, and late summer 1998. Elsewhere in 1995, bleaching was caused by higher-than-normal summer sea temperatures; in San Salvador, however, temperatures were normal. In 1998 a prolonged period of higher-than-normal sea temperatures preceded bleaching on San Salvador and worldwide. During the 1995 event, one of the monitored reefs had twice the percentage of coral colonies bleached as the other two. Bleaching was more evenly distributed among the reefs during the 1998 event. In 1995 Agaricia agaricites was significantly more affected than other coral species, with almost 50% of all its colonies showing bleaching. Bleaching was more evenly spread among coral species in 1998, with five species showing bleaching on more than 40% of their colonies. Bleaching began on Millepora as early as August during the 1998 event and progressed to other species through the remainder of the autumn. In 1995 bleaching was not seen until late autumn and appeared to impact all affected species at about the same time. Recovery from the 1995 event was complete: no coral death or damage above normal background levels were seen. In the 1998 event, all Acropora cervicornis on the monitored reefs died and A. palmata was severely damaged. Millepora sp. lost almost half of their live tissue, and Montastraea sp. showed significant tissue damage following this event. Phototransect analysis suggests that more than 20% of total live tissue on affected species died during the 1998 event. A. cervicornis has demonstrated no re-growth from 1998 to 2000 on monitored reefs. Monitoring has suggested significant differences in causes and courses in these two events.

  20. Bleaching susceptibility and recovery of Colombian Caribbean corals in response to water current exposure and seasonal upwelling.

    Directory of Open Access Journals (Sweden)

    Elisa Bayraktarov

    Full Text Available Coral bleaching events are globally occurring more frequently and with higher intensity, mainly caused by increases in seawater temperature. In Tayrona National Natural Park (TNNP in the Colombian Caribbean, local coral communities are subjected to seasonal wind-triggered upwelling events coinciding with stronger water currents depending on location. This natural phenomenon offers the unique opportunity to study potential water current-induced mitigation mechanisms of coral bleaching in an upwelling influenced region. Therefore, coral bleaching susceptibility and recovery patterns were compared during a moderate and a mild bleaching event in December 2010 and 2011, and at the end of the subsequent upwelling periods at a water current-exposed and -sheltered site of an exemplary bay using permanent transect and labeling tools. This was accompanied by parallel monitoring of key environmental variables. Findings revealed that in 2010 overall coral bleaching before upwelling was significantly higher at the sheltered (34% compared to the exposed site (8%. Whereas 97% of all previously bleached corals at the water current-exposed site had recovered from bleaching by April 2011, only 77% recovered at the sheltered site, but 12% had died there. In December 2011, only mild bleaching (<10% at both sites was observed, but corals recovered significantly at both sites in the course of upwelling. No differences in water temperatures between sites occurred, but water current exposure and turbidity were significantly higher at the exposed site, suggesting that these variables may be responsible for the observed site-specific mitigation of coral bleaching. This indicates the existence of local resilience patterns against coral bleaching in Caribbean reefs.

  1. Effect of laser-assisted bleaching with Nd:YAG and diode lasers on shear bond strength of orthodontic brackets.

    Science.gov (United States)

    Mirhashemi, Amirhossein; Emadian Razavi, Elham Sadat; Behboodi, Sara; Chiniforush, Nasim

    2015-12-01

    The aim of the present study was to assess the effect of laser-assisted bleaching with neodymium:yttrium-aluminum-garnet (Nd:YAG) and diode lasers on shear bond strength (SBS) of orthodontic brackets. One hundred and four extracted human premolars were randomly divided into four groups: group 1: No bleaching applied (control group); group 2: Teeth bleached with 40 % hydrogen peroxide; group 3: Teeth treated with 30 % hydrogen peroxide activated with Nd:YAG laser (1064 nm, 2.5 W, 25 Hz, pulse duration of 100 μs, 6 mm distance); and group 4: Teeth treated with 30 % hydrogen peroxide activated with diode laser (810 nm, 1 W, CW, 6 mm distance). Equal numbers of teeth in groups 2, 3, and 4 were bonded at start, 1 h, 24 h, and 1 week after bleaching. A universal testing machine measured the SBS of the samples 24 h after bonding. After bracket debonding, the amount of residual adhesive on the enamel surface was observed under a stereomicroscope to determine the adhesive remnant index (ARI) scores. The SBS in the unbleached group was significantly higher than that in the bleached groups bonded immediately and 1 h after laser-assisted bleaching (P laser-assisted bleaching, the SBS was found to be significantly lower than that in the control group. Significant differences in the ARI scores existed among groups as well. The SBS of brackets seems to increase quickly within an hour after laser-assisted bleaching and 24 h after conventional bleaching. Thus, this protocol can be recommended if it is necessary to bond the brackets on the same day of bleaching.

  2. Bleaching and stress in coral reef ecosystems: hsp70 expression by the giant barrel sponge Xestospongia muta.

    Science.gov (United States)

    López-Legentil, Susanna; Song, Bongkeun; McMurray, Steven E; Pawlik, Joseph R

    2008-04-01

    Sponges are a prominent component of coral reef ecosystems. Like reef-building corals, some sponges have been reported to bleach and die. The giant barrel sponge Xestospongia muta is one of the largest and most important components of Caribbean coral reef communities. Tissues of X. muta contain cyanobacterial symbionts of the Synechococcus group. Two types of bleaching have been described: cyclic bleaching, from which sponges recover, and fatal bleaching, which usually results in sponge death. We quantified hsp70 gene expression as an indicator of stress in X. muta undergoing cyclic and fatal bleaching and in response to thermal and salinity variability in both field and laboratory settings. Chlorophyll a content of sponge tissue was estimated to determine whether hsp70 expression was related to cyanobacterial abundance. We found that fatally bleached sponge tissue presented significantly higher hsp70 gene expression, but cyclically bleached tissue did not, yet both cyclic and fatally bleached tissues had lower chlorophyll a concentrations than nonbleached tissue. These results corroborate field observations suggesting that cyclic bleaching is a temporary, nonstressful state, while fatal bleaching causes significant levels of stress, leading to mortality. Our results support the hypothesis that Synechococcus symbionts are commensals that provide no clear advantage to their sponge host. In laboratory experiments, sponge pieces incubated at 30 degrees C exhibited significantly higher hsp70 expression than control pieces after 1.5 h, with sponge mortality after less than 15 h. In contrast, sponges at different salinities were not significantly stressed after the same period of time. Stress associated with increasing seawater temperatures may result in declining sponge populations in coral reef ecosystems.

  3. The effect of preoperative ibuprofen on tooth sensitivity caused by in-office bleaching.

    Science.gov (United States)

    Charakorn, Pornpimoln; Cabanilla, Leyvee L; Wagner, Warren C; Foong, Wai-Choong; Shaheen, Jennifer; Pregitzer, Robin; Schneider, Dylan

    2009-01-01

    This study determined the effect of Ibuprofen on tooth sensitivity from in-office bleaching with 38% hydrogen peroxide. A double-blind, randomized-controlled clinical trial was performed on healthy non-smoker patients who retain all anterior teeth (N=31). Patients with anterior restorations, calculus or heavy stain, and those who were taking medications or desensitizer products were excluded. After signing the informed consent, the patients were randomly divided into a Placebo group (n=16) that received a placebo (tinted oil in clear capsule) (Health Dimensions Inc, Compound Pharmacy, Farmington Hills, MI, U.S.A.) or an Ibuprofen group (n=15) that received a 600 mg, PO single dose of Ibuprofen (Advil Liquid Gel, Wyeth, Madison, NJ, USA). The patients were watched while taking the capsules 30 minutes prior to treatment. A single operator applied the 38% hydrogen peroxide (Opalescence Xtra Boost, Ultradent Products Inc) for 20 minutes on 12 anterior teeth. The hydrogen peroxide solution was then rinsed, the teeth were gently dried and the cycle was repeated, for a total application time of 40 minutes. A Visual Analog Scale (VAS) was used to evaluate the level of sensitivity 30 minutes before treatment, immediately after treatment, then 1 hour and 24 hours post-bleaching. The patients graded their maximum sensitivity levels during each period on a scale from 0 to 100 (0=no sensitivity, 100=unbearable sensitivity). The VAS scores were statistically analyzed to compare the groups' scores at different times and to compare the scores within each group at various times (Wilcoxon rank sum tests). The mean score and standard deviation of the Ibuprofen group immediately after bleaching was 5.0 +/- 9.9, at 1 hour--31.5 +/- 32.1 and at 24 hours--25.8 +/- 30.8; the placebo group at the time of treatment was 26.6 +/- 31.0, at 1 hour--30.9 +/- 30.5 and at 24 hours--31.1 +/- 32.6. When comparing the two groups at different times, the Ibuprofen group showed statistically

  4. LED and low level laser therapy association in tooth bleaching using a novel low concentration H2O2/N-doped TiO2 bleaching agent

    Science.gov (United States)

    Bezerra Dias, Hércules; Teixeira Carrera, Emanuelle; Freitas Bortolatto, Janaína; Ferrarezi de Andrade, Marcelo; Nara de Souza Rastelli, Alessandra

    2016-01-01

    Since low concentration bleaching agents containing N-doped TiO2 nanoparticles have been introduced as an alternative to conventional agents, it is important to verify their efficacy and the hypersensitivity effect in clinical practice. Six volunteer patients were evaluated for color change and hypersensitivity after bleaching using 35% H2O2 (one session of two 12 min applications) and 6% H2O2/N-doped TiO2 (one session of three 12 min applications) and after low level laser therapy application (LLLT) (780 nm, 40 mW, 10 J.cm-2, 10 s). Based on this case study, the nanobleaching agent provided better or similar aesthetic results than the conventional agent under high concentration, and its association with LLLT satisfactorily decreased the hypersensitivity. The 6% H2O2/N-doped TiO2 agent could be used instead of conventional in-office bleaching agents under high concentrations to fulfill the rising patient demand for aesthetics.

  5. Domestic use of bleach and infections in children : a multicentre cross-sectional study

    NARCIS (Netherlands)

    Casas, Lidia; Espinosa, Ana; Borràs-Santos, Alícia; Jacobs, José; Krop, Esmeralda; Heederik, Dick; Nemery, Benoit; Pekkanen, Juha; Hyvärinen, Anne; Täubel, Martin; Zock, Jan-Paul

    2015-01-01

    OBJECTIVE: To report the effects of bleach use at home on the frequency of infections in 9102 school-age children participating in the HITEA project. METHODS: Parents of pupils aged 6-12 years from schools in Barcelona province (Spain), Utrecht province (the Netherlands) and Eastern and Central Finl

  6. Effect of low-level laser therapy on tooth sensitivity induced by in-office bleaching.

    Science.gov (United States)

    Moosavi, Horieh; Arjmand, Nooshin; Ahrari, Farzaneh; Zakeri, Majid; Maleknejad, Fatemeh

    2016-05-01

    This study aimed to investigate the effect of low-level laser therapy (LLLT) on tooth sensitivity induced by in-office bleaching. Sixty-six patients enrolled in this randomized clinical trial. Following the in-office procedure with 40% hydrogen peroxide, the participants were randomly divided into three groups. The patients in group 1 received irradiation from a low-level red laser (LLRL; 660 nm, 200 mW, 15 s, 12 J/cm(2)), whereas participants in group 2 were subjected to a low-level infrared laser (LLIL; 810 nm) under similar conditions as in group 1. In group 3 (placebo), the laser treatment was the same as that in groups 1 and 2, but without energy output. The degree of tooth sensitivity was recorded at 1, 24, and 48 h after bleaching using a visual analog scale (VAS). The change in tooth shade was measured 30 days after tooth whitening. The intensity of tooth sensitivity was not significantly different between groups at 1 h after bleaching (p > 0.05). At 24 h after therapy, pain level was significantly lower in the LLIL group compared to the LLRL and placebo groups (p  0.05) and both were significantly lower than that of the placebo group (p  0.05). LLLT with an infrared diode laser could be recommended as a suitable strategy to reduce the intensity of tooth sensitivity after in-office bleaching.

  7. MODELING HYDROGEN PEROXIDE BLEACHING OF SODA PULP FROM OIL-PALM EMPTY FRUIT BUNCHES

    Directory of Open Access Journals (Sweden)

    Ana Ferrer

    2011-04-01

    Full Text Available The influence of the variables soda (0.5-3.0%, hydrogen peroxide (1.0-6.0% and time (1-5 h in the bleaching of soda pulp of empty fruit bunches (EFB from oil-palm, on the properties of bleached pulps, was studied. Polynomial and neural fuzzy models reproduced the results of brightness, kappa number, and viscosity of the pulps with errors less than 10%. By the simulation of the bleaching of pulp, using the polynomial and neural fuzzy models, it was possible to find optimal values of operating variables, so that the properties of bleached pulps differed only slightly from their best values and yet it was possible to save chemical reagents, energy, and plant size, operating with lower values of operating variables. Thus, operating with 1.13% soda concentration and 2.25% hydrogen peroxide concentration for 3 hours, a pulp with a brightness of 75.1% (8.1% below the maximum and a viscosity of 740 mL/g (10.4% less than the maximum value, was obtained.

  8. THE CONDITION OF CORAL REEFS IN SOUTH FLORIDA (2000) USING CORAL DISEASE AND BLEACHING AS INDICATORS

    Science.gov (United States)

    The destruction for coral reef habitats is occurring at unprecedented levels. Coral disease epizootics in the Southwestern Atlantic have lead to coral replacement by turf algae, prompting a call to classify some coral species as endangered. In addition, a massive bleaching event ...

  9. Thermal stress markers in Colpophyllia natans provide an archive of site-specific bleaching events

    Science.gov (United States)

    Mallela, Jennie; Hetzinger, Steffen; Halfar, Jochen

    2016-03-01

    Tropical coral reef monitoring relies heavily on in situ diver observations. However, in many reef regions resources are not available to regularly monitor reefs. This lack of historical baseline data makes it difficult to determine how different reefs respond to environmental stressors and what the implications are for management. To test whether coral cores could be used to identify bleaching events retrospectively, three sites in Tobago with pre-existing reef data including water quality and bleaching observations were identified. Colpophyllia natans cores were examined for growth anomalies which occurred during periods of thermal stress. If present, anomalies were compared to in situ, real-time bleaching observations and water quality data. Interestingly, sites with better water quality during the 2005 thermal anomaly were less prone to bleaching. We suggest that by reducing terrestrial run-off (e.g., sediment and nutrients), and therefore improving marine water quality, reef managers could enhance near-shore coral reef resilience during high-temperature events.

  10. PREDICTING CORAL BLEACHING IN RESPONSE TO ENVIRONMENTAL STRESSORS USING 8 YEARS OF GLOBAL-SCALE DATA.

    Science.gov (United States)

    Coral reefs are among the most diverse marine ecosystems on the planet (Wilkinson 2002), but have experienced extensive mortality over the past few decades as a result of mass bleaching events (Hoegh-Guldberg 1999, Wilkinson 2002, Hughes 2003, Obura 2005). Historically, elevated...

  11. Pigmentation changes in Siderastrea spp. during bleaching events in the costal reefs of northeastern Brazil

    Directory of Open Access Journals (Sweden)

    Roberto Sassi

    2015-03-01

    Full Text Available We report here the occurrence of seasonal changes in the pigmentation of colonies of Siderastrea spp. during bleaching events on coastal reefs in northeastern Brazil. Bleached affected almost 50% of coral colonies analyzed in Cabo Branco reefs (Paraiba state in the summer of 2005. The same phenomenon was detected along various coastal reefs in northeastern Brazil during the summer of 2007 and 2008. These events were seasonal, and began with the emergence of pale colonies that became pale-pink and then purple during the rainy months. The patterns and intensity of colonies pigmentation changes varied with the studied sites. The decrease in zooxanthellae density and chlorophyll-a content was quantified in the colonies with their pigmentation pattern altered (bleaching. Microbiological analyses revealed higher densities of bacteria in pink colonies (bleached as compared to brown colonies (normal. Environmental disturbances may lead to the pigmentation changes in Siderastrea spp., but the immediate causes of this phenomenon are not clear and require further investigations.

  12. Climate change, coral bleaching and the future of the world's coral reefs

    Energy Technology Data Exchange (ETDEWEB)

    Hoegh-Guldberg, O. [University of Sydney, Sydney, NSW (Australia). School of Biological Sciences

    1999-07-01

    Sea temperatures in many tropical regions have increased by almost 1{degree}C over the past 100 years, and are currently increasing at about 1-2{degree}C per century. Mass coral bleaching has occurred in association with episodes of elevated sea temperatures over the past 20 years and involves the loss of the zooxanthellae following chronic photoinhibition. Mass bleaching has resulted in significant losses of live coral in many parts of the world. This paper considers the biochemical, physiological and ecological perspectives of coral bleaching. It also uses the outputs of four runs from three models of global climate change which simulate changes in sea temperature and hence how the frequency and intensity of bleaching events will change over the next 100 years. The results suggest that the thermal tolerances of reef-building corals are likely to be exceeded every year within the next few decades. Events as severe as the 1998 event, the worst on record, are likely to become commonplace within 20 years. Most information suggests that the capacity for acclimation by corals has already been exceeded, and that adaptation will be too slow to avert a decline in the quality of the world's reefs.

  13. Spectral discrimination of bleached and healthy submerged corals based on principal components analysis

    Energy Technology Data Exchange (ETDEWEB)

    Holden, H.; LeDrew, E. [Univ. of Waterloo, Ontario (Canada)

    1997-06-01

    Remote discrimination of substrate types in relatively shallow coastal waters has been limited by the spatial and spectral resolution of available sensors. An additional limiting factor is the strong attenuating influence of the water column over the substrate. As a result, there have been limited attempts to map submerged ecosystems such as coral reefs based on spectral characteristics. Both healthy and bleached corals were measured at depth with a hand-held spectroradiometer, and their spectra compared. Two separate principal components analyses (PCA) were performed on two sets of spectral data. The PCA revealed that there is indeed a spectral difference based on health. In the first data set, the first component (healthy coral) explains 46.82%, while the second component (bleached coral) explains 46.35% of the variance. In the second data set, the first component (bleached coral) explained 46.99%; the second component (healthy coral) explained 36.55%; and the third component (healthy coral) explained 15.44 % of the total variance in the original data. These results are encouraging with respect to using an airborne spectroradiometer to identify areas of bleached corals thus enabling accurate monitoring over time.

  14. Excitation Light Dose Engineering to Reduce Photo-bleaching and Photo-toxicity.

    Science.gov (United States)

    Boudreau, Colton; Wee, Tse-Luen Erika; Duh, Yan-Rung Silvia; Couto, Melissa P; Ardakani, Kimya H; Brown, Claire M

    2016-01-01

    It is important to determine the most effective method of delivering light onto a specimen for minimal light induced damage. Assays are presented to measure photo-bleaching of fluorophores and photo-toxicity to living cells under different illumination conditions. Turning the light off during part of the experimental time reduced photo-bleaching in a manner proportional to the time of light exposure. The rate of photo-bleaching of EGFP was reduced by 9-fold with light pulsing on the micro-second scale. Similarly, in living cells, rapid line scanning resulted in reduced cell stress as measured by mitochondrial potential, rapid cell protrusion and reduced cell retraction. This was achieved on a commercial confocal laser scanning microscope, without any compromise in image quality, by using rapid laser scan settings and line averaging. Therefore this technique can be implemented broadly without any software or hardware upgrades. Researchers can use the rapid line scanning option to immediately improve image quality on fixed samples, reduce photo-bleaching for large high resolution 3D datasets and improve cell health in live cell experiments. The assays developed here can be applied to other microscopy platforms to measure and optimize light delivery for minimal sample damage and photo-toxicity.

  15. Effects of alpha-tocopherol on fracture resistance after endodontic treatment, bleaching and restoration

    Directory of Open Access Journals (Sweden)

    Keren Cristina Fagundes JORDÃO-BASSO

    2016-01-01

    Full Text Available Abstract This study evaluated the effects of 10% alphatocopherol on the fracture resistance of endodontically treated teeth subjected to tooth bleaching with hydrogen peroxide and immediately restored with composite resin. Fifty bovine incisors were selected, including 10 sound teeth that constituted the control group (G1 (C. The remaining 40 teeth, which were endodontically treated, were divided into four groups (n = 10: G2 (CR, consisting of teeth immediately restored with composite resin; G3 (HP + CR, consisting of teeth subjected to tooth bleaching with 38% hydrogen peroxide and immediately restored with composite resin; G4 (HP + SA + CR, which received treatment similar to that used for G3, but with 10% sodium ascorbate gel applied after the bleaching protocol; and G5 (HP + AT + CR, which was similar to G4 but included 10% alphatocopherol gel as an antioxidant. After 24 h, composite restorations were performed, and teeth were subjected to a fracture resistance test at a speed of 0.5 mm/min in an electromechanical testing machine. The axial force was applied with an angle of incidence of 135° relative to the long axis of the root. Data were subjected to ANOVA and Tukey tests (p = 0.05. G1 exhibited the highest fracture resistance (p < 0.05. No significant differences among the other experimental groups were observed. The 10% sodium ascorbate and 10% alphatocopherol gels did not improve the fracture resistance of endodontically treated teeth subjected to bleaching with 38% hydrogen peroxide.

  16. Effect of sodium ascorbate on the bond strength of silorane and methacrylate composites after vital bleaching

    Directory of Open Access Journals (Sweden)

    Eda Guler

    2013-07-01

    Full Text Available We investigated the effect of sodium ascorbate (SA on the microtensile bond strengths (MTBSs of different composites to bovine enamel after vital bleaching with hydrogen peroxide (HP or carbamide peroxide (CP. Thirty bovine incisors were randomly divided into five groups and treated with no bleaching application (control, 35% HP alone, 35% HP + 10% SA for 10 minutes (HP + SA, 16% CP alone, or 16% CP + 10% SA for 10 minutes (CP + SA. Specimens were restored with Silorane adhesive and Filtek Silorane composite (designated as S / group or with Clearfil SE bond and Filtek Supreme XT (designated as F / group. Composite build-up was created on the enamel. Sectioned specimens (n = 10 per group; 1 mm2; cross-sectional area were created and stressed in a universal testing machine at 1 mm/min crosshead speed. The application of 10% SA immediately after bleaching with 16% CP or 35% HP increased the enamel MTBS, regardless of the adhesive / composite resin used. The resulting MTBS values were similar to those of the control groups. Use of 16% CP and 35% HP alone decreased the enamel MTBS, regardless of the adhesive / composite resin used, with F / CP + SA = F / HP + SA = F / CP = S / CP + SA = S / HP + SA = S / C > S / CP = S / HP = F / CP = F / HP (p < 0.05. We concluded that the application of SA for 10 minutes immediately after vital bleaching increases the enamel BS for dimethacrylate- and silorane-based composites

  17. Metabolite profiling of symbiont and host during thermal stress and bleaching in the coral Acropora aspera

    Science.gov (United States)

    Hillyer, Katie E.; Dias, Daniel A.; Lutz, Adrian; Wilkinson, Shaun P.; Roessner, Ute; Davy, Simon K.

    2017-03-01

    Rising seawater temperatures pose a significant threat to the persistence of coral reefs. Despite the importance of these systems, major gaps remain in our understanding of how thermal stress and bleaching affect the metabolic networks that underpin holobiont function. We applied gas chromatography-mass spectrometry (GC-MS) metabolomics to detect changes in the intracellular free metabolite pools (polar and semi-polar compounds) of in hospite dinoflagellate symbionts and their coral hosts (and any associated microorganisms) during early- and late-stage thermal bleaching (a reduction of approximately 50 and 70% in symbiont density, respectively). We detected characteristic changes to the metabolite profiles of each symbiotic partner associated with individual cellular responses to thermal, oxidative and osmotic stress, which progressed with the severity of bleaching. Alterations were also indicative of changes to energy-generating and biosynthesis pathways in both partners, with a shift to the increased catabolism of lipid stores. Specifically, in symbiont intracellular metabolite pools, we observed accumulations of multiple free fatty acids, plus the chloroplast-associated antioxidant alpha-tocopherol. In the host, we detected a decline in the abundance of pools of multiple carbohydrates, amino acids and intermediates, in addition to the antioxidant ascorbate. These findings further our understanding of the metabolic changes that occur to symbiont and host (and its associated microorganisms) during thermal bleaching. These findings also provide further insight into the largely undescribed roles of free metabolite pools in cellular homeostasis, signalling and acclimation to thermal stress in the cnidarian-dinoflagellate symbiosis.

  18. Effect of Bleaching on Color Change and Surface Topography of Composite Restorations

    Directory of Open Access Journals (Sweden)

    Gunjan Pruthi

    2010-01-01

    Full Text Available This study was conducted to determine the effect of 15% carbamide peroxide bleaching agent on color change and surface topography of different composite veneering materials (Filtek Z350 (3M ESPE, Esthet X (Dentsply India, and Admira (Voco, Germany. Methods. 30 samples were fabricated for evaluation of color change using CIELAB color system and Gonioreflectometer (GK 311/M, ZEISS. 45 disc-shaped specimens were made for evaluation of surface topography after bleaching (Nupro White Gold; Dentsply using SEM. Statistical analysis. One way ANOVA and Multiple comparison tests were used to analyze the data. Statistical significance was declared if the P value was .05 or less. Results and conclusion. All the specimens showed significant discoloration (ΔE>3.3 after their immersion in solutions representing food and beverages. The total color change after bleaching as compared to baseline color was significant in Filtek Z350 (P=.000 and Esthet X (P=.002, while it was insignificant for Admira (P=.18. Esthet X showed maximum surface roughness followed by Admira and Filtek Z350. Bleaching was effective in reducing the discoloration to a clinically acceptable value in all the three groups (ΔE<3.3.

  19. Coral Reef Recovery Status in South Andaman Islands after the Bleaching Event 2010

    Institute of Scientific and Technical Information of China (English)

    N. Marimuthu; J. Jerald Wilson; N.V. Vinithkumar; R. Kirubagaran

    2013-01-01

    The Andaman and Nicobar Islands are one of the Union Territories of India,located in the eastern part of the Bay of Bengal.In 2010 summer,the increment in sea surface water temperature (up to 34℃) resulted in the bleaching of about 74% to 77% of corals in the South Andaman.During this event,coral species such as Acropora cerealis,A.humilis,Montipora sp.,Favia pallida,Diploastrea sp.,Goniopora sp.Fungia concinna,Gardineroseries sp.,Porites sp.,Favites abdita and Lobophyllia robusta were severely affected.This study is to assess the recovery status of the reef ecosystem by estimating the percentage of Live Coral cover,Bleached coral cover,Dead coral with algae,Rubble,Sandy fiat,Algal assemblage and other associated organisms.The sedimentation rate (mg cm-2 d-1) and coral coverage (%) were assessed during this study period.The average sedimentation rate was ranged between 0.27 and 0.89mg cm-2 d-1.The observed post bleaching recovery of coral cover was 21.1% at Port Blair Bay and 13.29% at Havelock Island.The mortality rate of coral cover due to this bleaching was estimated as 2.05% at Port Blair Bay and 9.82% at Havelock Island.Once the sea water temperature resumed back to the normal condition,most of the corals were found recovered.

  20. An effective bleaching technique for non-vital, discoloured teeth in children and adolescents.

    LENUS (Irish Health Repository)

    Leith, Rona

    2009-08-01

    Discolouration of a permanent incisor may have a significant social impact on children and adolescents. Intervention should be minimally destructive of tooth tissue and should not compromise future restorative options. This paper reviews the technique of inside\\/outside bleaching, and proposes it as an efficient, effective and acceptable method for use in the compliant younger patient with an unaesthetic non-vital tooth.

  1. IMPACTS OF BLEACHING CHEMICALS AND OUTDOOR EXPOSURE ON CHANGES IN THE COLOR OF SOME VARNISHED WOODS

    Directory of Open Access Journals (Sweden)

    Ayhan Özçifçi

    2010-05-01

    Full Text Available This study was carried out to determine the changes of the surface color of Scots pine (Pinus sylvestris L. and Oriental beech (Fagus orientalis Lipsky woods after exterior conditioning. First, the samples were bleached with 25% NaOH and 17.5% H2O2. Afterwards, they were varnished with polyurethane and synthetic varnishes, and then they were exposed to exterior conditions for 12 months. Tests for color differences and metric chroma were done according to the ASTM D-2244 standard. It was deduced that exposure to exterior conditions causes color differences in samples, while bleaching with the given solution reduces that effects, and reverts the surface color to that of the natural control specimens. However, bleached specimens exposed to 12 months exterior conditioning had more discoloration than those of natural control samples. In conclusion, if the wood materials will be exposed to outdoors after bleaching, finishing process should be applied to surfaces in order to prevent further color change.

  2. Effects of home bleaching on surface hardness and surface roughness of an experimental nanocomposite

    Directory of Open Access Journals (Sweden)

    Ab-Ghani Zuryati

    2013-01-01

    Full Text Available Objective: Home bleaching agents may not be safe for composite resins. The purpose of this study was to evaluate the effects of 10 and 20% Opalescence ® PF home bleaching agents on the surface roughness and hardness of universal nanocomposite (Filtek Z350, anterior nanocomposite (KeLFiL, and nanohybrid composite (TPH 3. Materials and Methods: Fifty-four composite resin samples with 18 samples for each type of composite resin were prepared using acrylic molds (4 × 2 mm. Each type of composite resin was further divided into three groups [n = 6 controls were placed in distilled water for 14 days and the other two groups of n = 6 were bleached with 10 and 20% carbamide peroxide (CP, respectively for 14 days]. Surface hardness of the composite resin was tested with a Vickers hardness tester, whereas surface roughness was tested with atomic force microscopy (AFM. Results: There were significant changes in the surface hardness of KeLFiL and TPH 3. However, all the tested materials showed no significant changes in the surface roughness. Conclusion: After 14 days of home bleaching treatment, there was no adverse effect on the surface roughness of all three composite resins, although the surface hardness for KeLFiL and TPH 3 were significantly reduced.

  3. Effects of home bleaching on surface hardness and surface roughness of an experimental nanocomposite

    Science.gov (United States)

    Zuryati, Ab-Ghani; Qian, Ooi Qian; Dasmawati, Mohamad

    2013-01-01

    Objective: Home bleaching agents may not be safe for composite resins. The purpose of this study was to evaluate the effects of 10 and 20% Opalescence® PF home bleaching agents on the surface roughness and hardness of universal nanocomposite (Filtek Z350), anterior nanocomposite (KeLFiL), and nanohybrid composite (TPH 3). Materials and Methods: Fifty-four composite resin samples with 18 samples for each type of composite resin were prepared using acrylic molds (4 × 2 mm). Each type of composite resin was further divided into three groups [n = 6 controls were placed in distilled water for 14 days and the other two groups of n = 6 were bleached with 10 and 20% carbamide peroxide (CP), respectively for 14 days]. Surface hardness of the composite resin was tested with a Vickers hardness tester, whereas surface roughness was tested with atomic force microscopy (AFM). Results: There were significant changes in the surface hardness of KeLFiL and TPH 3. However, all the tested materials showed no significant changes in the surface roughness. Conclusion: After 14 days of home bleaching treatment, there was no adverse effect on the surface roughness of all three composite resins, although the surface hardness for KeLFiL and TPH 3 were significantly reduced. PMID:23956541

  4. 16 CFR 301.19 - Pointing, dyeing, bleaching or otherwise artificially coloring.

    Science.gov (United States)

    2010-01-01

    ... artificially coloring. 301.19 Section 301.19 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER... Pointing, dyeing, bleaching or otherwise artificially coloring. (a) Where a fur or fur product is pointed... otherwise, for the purpose of changing the color of the fur or hair, or to accentuate its natural...

  5. Corrosion Study of Stainless Steels in Peracetic Acid Bleach Media With and Without Chloride and Chelant

    Directory of Open Access Journals (Sweden)

    Rohtash

    2014-12-01

    Full Text Available The paper industries are adopting non-chlorine containing chemicals e.g. peroxide, ozone, peracids etc. as alternate of chlorine based bleach chemicals e.g. chlorine and chlorine dioxide etc. with the aim of eco-friend atmospheres. Changeover to the new chemicals in the bleaching process is likely to affect the metallurgy of the existing bleach plants due to change in the corrosivity of the media. Accordingly, corrosion investigations were performed in a peracid namely peracetic acid to test the suitability of austenitic stainless steels 654SMO, 265SMO, 2205, 317L and 316L. The performance of above stainless steels was evaluated through long term immersion tests and Electrochemical polarization measurements in peracetic acid (PAA bleach media at pH value 4 maintaining concentration 0.2 % as active oxygen along with three chloride levels 0, 500 and 1000 ppm in pulp-free laboratory. To study the effect of corrosion inhibitors with extending limit of chloride in liquors, measurements were also made with two types of chelants- EDTA & MgSO4. The results showed that corrosivity of PAA reduced by addition of chelant while increased with concentration of Cl¯. The results also exhibited that EDTA is better inhibitor than MgSO4.

  6. Levels of immunity parameters underpin bleaching and disease susceptibility of reef corals.

    Science.gov (United States)

    Palmer, Caroline V; Bythell, John C; Willis, Bette L

    2010-06-01

    Immunity is a key life history trait that may explain hierarchies in the susceptibility of corals to disease and thermal bleaching, two of the greatest current threats to coral health and the persistence of tropical reefs. Despite their ongoing and rapid global decline, there have been few investigations into the immunity mechanisms of reef-building corals. Variables commonly associated with invertebrate immunity, including the presence of melanin, size of melanin-containing granular cells, and phenoloxidase (PO) activity, as well as concentrations of fluorescent proteins (FPs), were investigated in hard (Scleractinia) and soft (Alcyonacea) corals spanning 10 families from the Great Barrier Reef. Detectable levels of these indicators were present in all corals investigated, although relative investment differed among coral taxa. Overall levels of investment were inversely correlated to thermal bleaching and disease susceptibility. In addition, PO activity, melanin-containing granular cell size, and FP concentration were each found to be significant predictors of susceptibility and thus may play key roles in coral immunity. Correlative evidence that taxonomic (family-level) variation in the levels of these constituent immunity parameters underpins susceptibility to both thermal bleaching and disease indicates that baseline immunity underlies the vulnerability of corals to these two threats. This reinforces the necessity of a holistic approach to understanding bleaching and disease in order to accurately determine the resilience of coral reefs.

  7. Coral reef recovery status in south Andaman Islands after the bleaching event 2010

    Science.gov (United States)

    Marimuthu, N.; Jerald Wilson, J.; Vinithkumar, N. V.; Kirubagaran, R.

    2013-03-01

    The Andaman and Nicobar Islands are one of the Union Territories of India, located in the eastern part of the Bay of Bengal. In 2010 summer, the increment in sea surface water temperature (up to 34°C) resulted in the bleaching of about 74% to 77% of corals in the South Andaman. During this event, coral species such as Acropora cerealis, A. humilis, Montipora sp., Favia pallida, Diploastrea sp., Goniopora sp. Fungia concinna, Gardineroseries sp., Porites sp., Favites abdita and Lobophyllia robusta were severely affected. This study is to assess the recovery status of the reef ecosystem by estimating the percentage of Live Coral cover, Bleached coral cover, Dead coral with algae, Rubble, Sandy flat, Algal assemblage and other associated organisms. The sedimentation rate (mg cm-2 d-1) and coral coverage (%) were assessed during this study period. The average sedimentation rate was ranged between 0.27 and 0.89 mg cm-2 d-1. The observed post bleaching recovery of coral cover was 21.1% at Port Blair Bay and 13.29% at Havelock Island. The mortality rate of coral cover due to this bleaching was estimated as 2.05% at Port Blair Bay and 9.82% at Havelock Island. Once the sea water temperature resumed back to the normal condition, most of the corals were found recovered.

  8. Metagenomic analysis of the coral holobiont during a natural bleaching event on the Great Barrier Reef.

    Science.gov (United States)

    Littman, Raechel; Willis, Bette L; Bourne, David G

    2011-12-01

    Understanding the effects of elevated seawater temperatures on each member of the coral holobiont (the complex comprised of coral polyps and associated symbiotic microorganisms, including Bacteria, viruses, Fungi, Archaea and endolithic algae) is becoming increasingly important as evidence accumulates that microbial members contribute to overall coral health, particularly during thermal stress. Here we use a metagenomic approach to identify metabolic and taxonomic shifts in microbial communities associated with the hard coral Acropora millepora throughout a natural thermal bleaching event at Magnetic Island (Great Barrier Reef). A direct comparison of metagenomic data sets from healthy versus bleached corals indicated major shifts in microbial associates during heat stress, including Bacteria, Archaea, viruses, Fungi and micro-algae. Overall, metabolism of the microbial community shifted from autotrophy to heterotrophy, including increases in genes associated with the metabolism of fatty acids, proteins, simple carbohydrates, phosphorus and sulfur. In addition, the proportion of virulence genes was higher in the bleached library, indicating an increase in microorganisms capable of pathogenesis following bleaching. These results demonstrate that thermal stress results in shifts in coral-associated microbial communities that may lead to deteriorating coral health.

  9. Combining bleach and mild predigestion improves ancient DNA recovery from bones

    DEFF Research Database (Denmark)

    Boessenkool, Sanne; Hanghøj, Kristian Ebbesen; Nistelberger, Heidi M.

    2017-01-01

    aimed to improve ancient DNA recovery before library amplification have recently been developed. Here, we test the effects of combining two of such protocols, a bleach wash and a predigestion step, on 12 bone samples of Atlantic cod and domestic horse aged 750-1350 cal. years before present. Using high...

  10. The northern limit of corals of the genus Acropora in temperate zones is determined by their resilience to cold bleaching.

    Science.gov (United States)

    Higuchi, Tomihiko; Agostini, Sylvain; Casareto, Beatriz Estela; Suzuki, Yoshimi; Yuyama, Ikuko

    2015-12-18

    The distribution of corals in Japan covers a wide range of latitudes, encompassing tropical to temperate zones. However, coral communities in temperate zones contain only a small subset of species. Among the parameters that determine the distribution of corals, temperature plays an important role. We tested the resilience to cold stress of three coral species belonging to the genus Acropora in incubation experiments. Acropora pruinosa, which is the northernmost of the three species, bleached at 13 °C, but recovered once temperatures were increased. The two other species, A. hyacinthus and A. solitaryensis, which has a more southerly range than A. pruinosa, died rapidly after bleaching at 13 °C. The physiological effects of cold bleaching on the corals included decreased rates of photosynthesis, respiration, and calcification, similar to the physiological effects observed with bleaching due to high temperature stress. Contrasting hot bleaching, no increases in antioxidant enzyme activities were observed, suggesting that reactive oxygen species play a less important role in bleaching under cold stress. These results confirmed the importance of resilience to cold stress in determining the distribution and northern limits of coral species, as cold events causing coral bleaching and high mortality occur regularly in temperate zones.

  11. A melanin-bleaching methodology for molecular and histopathological analysis of formalin-fixed paraffin-embedded tissue.

    Science.gov (United States)

    Chung, Joon-Yong; Choi, Jiyeon; Sears, John D; Ylaya, Kris; Perry, Candice; Choi, Chel H; Hong, Seung-Mo; Cho, Hanbyoul; Brown, Kevin M; Hewitt, Stephen M

    2016-10-01

    Removal of excessive melanin from heavily pigmented formalin-fixed paraffin-embedded (FFPE) melanoma tissues is essential for histomorphological and molecular diagnostic assessments. Although there have been efforts to address this issue, current methodologies remain complex and time-consuming, and are not suitable for multiple molecular applications. Herein, we have developed a robust and rapid melanin-bleaching methodology for FFPE tissue specimens. Our approach is based on quick bleaching (15 min) at high temperature (80 °C) with 0.5% diluted hydrogen peroxide (H2O2) in Tris-HCl, PBS, or Tris/Tricine/SDS buffer. Immunostaining for Ki-67 and HMB45 was enhanced by bleaching with 0.5% H2O2 in Tris/Tricine/SDS and Tris-HCl, respectively. In addition to histopathological applications, our approach also facilitates recovery of protein and nucleic acid from archival melanin-rich FFPE tissue sections. Protein extracted from bleached FFPE tissues was compatible with western blotting using anti-human GAPDH and AKT antibodies. Our bleaching condition significantly improved RNA quality compared with unbleached tissues without compromising the yield. Notably, the RNA/DNA obtained from bleached tissues was suitable for end point PCR and real-time quantitative RT-PCR. In conclusion, this improved melanin-bleaching method enhances and simplifies immunostaining procedures, and facilitates the use of melanin-rich FFPE tissues for histomorphological and PCR amplification-based molecular assays.

  12. Enzymatic Method for Rapid Determination of Oxalic Acid in Bleaching Filtrates from the Pulp and Paper Industry

    Institute of Scientific and Technical Information of China (English)

    HONG Feng; SJ(O)DE Anders; NILVEBRANT Nils-Olof; J(O)NSSON Leif J.

    2005-01-01

    Bleaching with oxygen-containing agents and recirculation of process streams in the pulp and paper industry has increased the accumulation of oxalic acid and danger for precipitation of calcium oxalate encrusts, scaling. Analysis and control of oxalic acid in bleaching filtrates is therefore becoming increasingly important in the pulp and paper industry.Chromatographic methods, such as IC and HPLC, are generally more time-consuming but are valuable as standard methods for determination of oxalic acid. However, the instrumentation needed is expensive and stationary. In this study, an enzymatic method based on oxalate oxidase and peroxidase was developed to determine oxalic acid in authentic bleaching filtrates using a spectrophotometer. The results showed that bleaching filtrates contain some compounds interfering with the enzymatic method.Pretreatment of the samples with activated charcoal was a successful approach for decreasing problems with interference. By using dilution followed by charcoal treatment, the results obtained from five bleaching filtrates with the colorimetric method correlated very well with those obtained using IC. This study offers a selective, fast and mobile analysis method to determine oxalic acid in bleaching filtrates from the pulp and paper industry. The convenient enzyme-based method improves the possibilities for control of critical oxalic acid concentrations in closed-loop bleaching streams.

  13. Clinical effects of exposure to coffee during at-home vital bleaching.

    Science.gov (United States)

    Rezende, M; Loguercio, A D; Reis, A; Kossatz, S

    2013-01-01

    The purpose of the present study was to evaluate whether exposure to coffee during bleaching treatment with 16% carbamide peroxide (CP) affects the degree of whitening and tooth sensitivity. Forty patients with central incisors darker than A2 were selected. Participants who did not drink coffee were assigned to the control group (CG), while participants who drink coffee at least twice a day were assigned to the experimental group (EG). For CG, foods with dyes were restricted. For EG there was no restriction on food and patients were asked to make coffee rinses for 30 seconds, four times daily. For both groups 16% CP was used for a period of three hours daily for three weeks. Shade evaluation was assessed visually by Vita classical shade guide and by the Easyshade spectrophotometer at baseline, during bleaching (first, second, and third weeks), and postbleaching (one week and one month). Patients recorded their sensitivity perceptions by means of the numerical rating scale and 0-10 visual analog scales. Variation in shade guide units and the two colors (ΔE) were evaluated by two-way analysis of variance and Tukey tests (α=0.05). Absolute risk of tooth sensitivity and intensity of tooth sensitivity was evaluated by Fisher exact and Mann-Whitney tests (α=0.05). Effective bleaching was observed for both groups after three weeks, without statistical difference. No difference in terms of risk of tooth sensitivity and intensity of tooth sensitivity was detected between groups. Approximately 57% of the participants experienced tooth sensitivity, which was recorded mainly as "mild." Exposure to coffee during bleaching treatment does not seem to affect the degree of bleaching and tooth sensitivity.

  14. Ocean acidification causes bleaching and productivity loss in coral reef builders.

    Science.gov (United States)

    Anthony, K R N; Kline, D I; Diaz-Pulido, G; Dove, S; Hoegh-Guldberg, O

    2008-11-11

    Ocean acidification represents a key threat to coral reefs by reducing the calcification rate of framework builders. In addition, acidification is likely to affect the relationship between corals and their symbiotic dinoflagellates and the productivity of this association. However, little is known about how acidification impacts on the physiology of reef builders and how acidification interacts with warming. Here, we report on an 8-week study that compared bleaching, productivity, and calcification responses of crustose coralline algae (CCA) and branching (Acropora) and massive (Porites) coral species in response to acidification and warming. Using a 30-tank experimental system, we manipulated CO(2) levels to simulate doubling and three- to fourfold increases [Intergovernmental Panel on Climate Change (IPCC) projection categories IV and VI] relative to present-day levels under cool and warm scenarios. Results indicated that high CO(2) is a bleaching agent for corals and CCA under high irradiance, acting synergistically with warming to lower thermal bleaching thresholds. We propose that CO(2) induces bleaching via its impact on photoprotective mechanisms of the photosystems. Overall, acidification impacted more strongly on bleaching and productivity than on calcification. Interestingly, the intermediate, warm CO(2) scenario led to a 30% increase in productivity in Acropora, whereas high CO(2) lead to zero productivity in both corals. CCA were most sensitive to acidification, with high CO(2) leading to negative productivity and high rates of net dissolution. Our findings suggest that sensitive reef-building species such as CCA may be pushed beyond their thresholds for growth and survival within the next few decades whereas corals will show delayed and mixed responses.

  15. Comparative clinical study of the effectiveness of different dental bleaching methods - two year follow-up

    Directory of Open Access Journals (Sweden)

    Rafael Francisco Lia Mondelli

    2012-08-01

    Full Text Available This study evaluated color change, stability, and tooth sensitivity in patients submitted to different bleaching techniques. MATERIAL AND METHODS: In this study, 48 patients were divided into five groups. A half-mouth design was conducted to compare two in-office bleaching techniques (with and without light activation: G1: 35% hydrogen peroxide (HP (Lase Peroxide - DMC Equipments, São Carlos, SP, Brazil + hybrid light (HL (LED/Diode Laser, Whitening Lase II DMC Equipments, São Carlos, SP, Brazil; G2: 35% HP; G3: 38% HP (X-traBoost - Ultradent, South Jordan UT, USA + HL; G4: 38% HP; and G5: 15% carbamide peroxide (CP (Opalescence PF - Ultradent, South Jordan UT, USA. For G1 and G3, HP was applied on the enamel surface for 3 consecutive applications activated by HL. Each application included 3x3' HL activations with 1' between each interval; for G2 and G4, HP was applied 3x15' with 15' between intervals; and for G5, 15% CP was applied for 120'/10 days at home. A spectrophotometer was used to measure color change before the treatment and after 24 h, 1 week, 1, 6, 12, 18 and 24 months. A VAS questionnaire was used to evaluate tooth sensitivity before the treatment, immediately following treatment, 24 h after and finally 1 week after. RESULTS: Statistical analysis did not reveal any significant differences between in-office bleaching with or without HL activation related to effectiveness; nevertheless the time required was less with HL. Statistical differences were observed between the results after 24 h, 1 week and 1, 6, 12, 18 and 24 months (intergroup. Immediately, in-office bleaching increased tooth sensitivity. The groups activated with HL required less application time with gel. CONCLUSION: All techniques and bleaching agents used were effective and demonstrated similar behaviors.

  16. 3D Surface Profile and Color Stability of Tooth Colored Filling Materials after Bleaching

    Directory of Open Access Journals (Sweden)

    Bryant Anthony Irawan

    2015-01-01

    Full Text Available This study aims to evaluate the effects of vital tooth bleaching with carbamide peroxide home bleaching and in-office bleaching on the color stability and 3D surface profile of dental restorative filling materials. Thirty discs (n=30 measure 6 mm in diameter and 2 mm thick for each of three restorative materials. These are nanofilled composite Filtek Z350 XT, the submicron composite Estelite Σ Quick, and nanofilled glass ionomer Ketac N100 nanoionomer and were fabricated in shade A2. Each group was further divided into three subgroups (n=10: subgroup A (Opalescence PF, subgroup B (Opalescence Boost in-office bleaching, and subgroup C (distilled water serving as control. Samples were bleached according to the manufacturer’s instructions for a period of two weeks. The Commission Internationale de L’Eclairage (CIE L*, a*, b* system was chosen for image processing, while 3D surface profile was tested with atomic force microscopy (AFM. Statistical analyses were performed with the Mann-Whitney tests and Krusal-Wallis with a P value of ≤0.05. The three restorative materials showed significant color changes (ΔE; P≤0.05. In diminishing order, the mean color changes recorded were Estelite Σ (3.82 ± 1.6 > Ketac Nano (2.97 ± 1.2 > Filtek Z350 XT (2.25 ± 1.0. However, none of the tested materials showed statistically significant changes in surface roughness; P>0.05.

  17. Perubahan NIlai pH Media Cair Daerah Permukaan Leher Gigi Pada Perawatan Bleaching Intra Korona

    Directory of Open Access Journals (Sweden)

    Kamizar Kamizar

    2015-10-01

    Full Text Available Intra coronal bleaching treatment can cause penetration of bleaching materials into the cervical teeth surface and due to this penetration the pH range would change around these area. From this point the research started by arranging 3 types of bleaching materials i.e. mixture of sodium perborat with water, sodium perborat with H2O2 3% and sodium perborat with H2O2 30%. These bleaching component were conditioned into the pulp 2 mm under cemento enamel junction on the trial tooth whose roots had been filled in, after that it was covered up with zinc phosphat cement and above this paraffin wax and nail. The removed tooth was soaked in a aquabides bottle and pH value was measured from the first day, third and seventh. Result showed that there was a change of pH in the aquabidest. The change appeared firstly on the first day with various levels on each group. Sod. Perborat + H2O2 3% to 7,84 and with water 8,015. As a matter of fact on the third day the change happened to sod. Perborat with water 8,037 and 8,298 with H2O2 3% 8,732 and 8,750. While sod. perborat with H2O2 30% was felt down its concentration into 8,847 and 8,827. As a result the change aquabidest pH was interfered or depended on the mixture of the bleaching materials itself such as; so. Perborat with water=10,15 ; sod. perborat with H2O2 3%= 9,10; sod. perborat with H2O2 30%= 7,60. pH value sod. perborat with water on the seventh day showed up its raising action though it's still below the rest two other groups' concentration pH levels.

  18. Effect of dental bleaching after bracket bonding and debonding using three different adhesive systems

    Directory of Open Access Journals (Sweden)

    Lucianna de Oliveira Gomes

    2013-04-01

    Full Text Available OBJECTIVE: To evaluate the influence of bonding and debonding of orthodontic brackets on dental in-home bleaching, taking into account three different adhesive systems. METHODS: Forty-four bovine incisors were divided into four groups according to the primer system used for orthodontic bracket bonding. Following the debonding of orthodontic brackets, the teeth were stored in staining solution for 96 hours. Then, teeth were whitened using 10% carbamide peroxide for two weeks at a 6-hour-a-day regime. Standardized digital photographs were taken at the following intervals: T0 (initial; T1 (after debonding; T2 (after pigmentation; T3, T4 and T5 representing 1, 7, and 14 days of bleaching. Repeatability and stability tests were carried out to check the method accuracy. Images were analyzed using Adobe Photoshop 7.0 software considering (L*a*b*color coordinate values and a modified color difference total (Δ;E'. RESULTS: The results of this study (ANOVA and Tukey; p < 0.01 demonstrated that after 7 days of bleaching, experimental groups showed significantly less teeth whitening compared to the control group. However, there were no significant color differences between the groups after 14 days, according to values of lightness (L*. CONCLUSIONS: Regardless of the adhesive primer system applied, bonding and debonding of orthodontic brackets alters the outcome of tooth whitening in the first 7 days of bleaching, however it has no influence on the whitening of the dental structure after 14 days of in-home dental bleaching with 10% carbamide peroxide.

  19. Unprecedented mass bleaching and loss of coral across 12° of latitude in Western Australia in 2010-11.

    Directory of Open Access Journals (Sweden)

    James A Y Moore

    Full Text Available BACKGROUND: Globally, coral bleaching has been responsible for a significant decline in both coral cover and diversity over the past two decades. During the summer of 2010-11, anomalous large-scale ocean warming induced unprecedented levels of coral bleaching accompanied by substantial storminess across more than 12° of latitude and 1200 kilometers of coastline in Western Australia (WA. METHODOLOGY/PRINCIPAL FINDINGS: Extreme La-Niña conditions caused extensive warming of waters and drove considerable storminess and cyclonic activity across WA from October 2010 to May 2011. Satellite-derived sea surface temperature measurements recorded anomalies of up to 5°C above long-term averages. Benthic surveys quantified the extent of bleaching at 10 locations across four regions from tropical to temperate waters. Bleaching was recorded in all locations across regions and ranged between 17% (±5.5 in the temperate Perth region, to 95% (±3.5 in the Exmouth Gulf of the tropical Ningaloo region. Coincident with high levels of bleaching, three cyclones passed in close proximity to study locations around the time of peak temperatures. Follow-up surveys revealed spatial heterogeneity in coral cover change with four of ten locations recording significant loss of coral cover. Relative decreases ranged between 22%-83.9% of total coral cover, with the greatest losses in the Exmouth Gulf. CONCLUSIONS/SIGNIFICANCE: The anomalous thermal stress of 2010-11 induced mass bleaching of corals along central and southern WA coral reefs. Significant coral bleaching was observed at multiple locations across the tropical-temperate divide spanning more than 1200 km of coastline. Resultant spatially patchy loss of coral cover under widespread and high levels of bleaching and cyclonic activity, suggests a degree of resilience for WA coral communities. However, the spatial extent of bleaching casts some doubt over hypotheses suggesting that future impacts to coral reefs under

  20. Evaluation of the influence of dental bleaching with 35% hydrogen peroxide in orthodontic bracket shear bond strength

    Directory of Open Access Journals (Sweden)

    Marcus Vinicius Neiva Nunes do Rego

    2013-04-01

    Full Text Available OBJECTIVE: The purpose of this study was to evaluate, in vitro, the bond strength of brackets bonded to premolars previously subjected to bleaching with a 35% hydrogen peroxide. METHODS: Twenty one healthy premolars were selected and randomly divided into three groups (n = 7. Group I (G1 included teeth that were not submitted to bleaching. The enamel surfaces of Groups II (G2 and III (G3 were submitted to a bleaching process with 35% hydrogen peroxide (Whiteness HP Maxx. On Group II (G2, after bleaching, the teeth were stored for 24 hours in distilled water at 98.6 ºF, and then, premolar metallic brackets were bonded using Transbond XT (3M resin. Group III (G3 was submitted to the same procedure seven days after bleaching. After bonding, all teeth were stored in distilled water at 98.6 ºF for 24 hours. All groups were submitted to a traction test using an EMIC DL2000 universal testing machine at a speed of 0.5 mm/min. RESULTS AND CONCLUSION: The bracket resistance to debonding was compared between the groups by the Kruskal-Wallis nonparametric test (p < 0.05 and it was verified that the bleaching agent significantly reduced bracket adhesion when bonded 24 hours after bleaching. However, seven days after bleaching, there was no significant difference on the resistance to debonding among groups G1 (19,52 kgf and G3 (18,44 kgf, meaning that it is necessary to wait longer after bleaching to bond brackets.

  1. Effect of Er,Cr:YSGG laser on the surface of composite restoratives during in-office tooth bleaching.

    Science.gov (United States)

    Dionysopoulos, Dimitrios; Strakas, Dimitrios; Tsitrou, Effrosyni; Tolidis, Kosmas; Koumpia, Effimia

    2016-07-01

    The aim of this in vitro study was to investigate the effect of Er,Cr:YSGG laser on the surface roughness and microhardness of various composite restoratives during in-office tooth bleaching. Five highly viscous composite restoratives and three flowable composite restoratives were investigated. Thirty cylindrical specimens of each material were made using Teflon molds. The specimens of each composite were randomly divided into three groups (n = 10). Group 1 specimens did not receive bleaching treatment, group 2 received a conventional in-office bleaching treatment, and group 3 received a laser-assisted in-office bleaching treatment using an Er,Cr:YSGG laser. Two-way ANOVA was used to determine significant interactions between materials and bleaching methods. One-way ANOVA and Tukey's post hoc test were used to compare the mean surface microhardness and roughness between materials for each treatment group (a = 0.05). Τhere were no significant differences in surface microhardness between the two bleached experimental groups for all the tested composites (p > 0.05). The reduction of surface microhardness after bleaching procedures ranged from 0.72 to 16.93 % for the specimens received conventional treatment and from 1.30 to 11.51 % for those received laser-assisted treatment. Moreover, there were no significant differences in Ra values between the experimental groups (p > 0.05) in all cases. The increase of surface roughness after the bleaching treatments was negligible and was between 0.43 and 4.78 %. The use of Er,Cr:YSGG laser during in-office tooth bleaching treatment did not affect the surface microhardness and roughness of the tested composite restorative materials.

  2. Bleaching effect and nonvola-tile holographic storage in doubly doped LiNbO3:Fe:Cu crystals

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The bleaching effect, i. e. the crystal shows that decoloration after it is illuminated by ultraviolet light, has been observed in congruent LiNbO3:Fe :Cu crystals. Based on this bleaching effect, a new technique including the reco rding phase by two interfering red beams and fixing phase by both UV light and a coherent red beam has been experimentally investigated to realize nonvolatile holographic storage in LiNbO3:Fe:Cu. The results of proof-of-concept experiments confirm that bleaching effect becomes an alternative physical mechanism for nonv olatile holographic storage with high recording sensitivity and weak light-induced scattering noise.

  3. The 2014 coral bleaching and freshwater flood events in Kāneʻohe Bay, Hawaiʻi

    Directory of Open Access Journals (Sweden)

    Keisha D. Bahr

    2015-08-01

    Full Text Available Until recently, subtropical Hawaiʻi escaped the major bleaching events that have devastated many tropical regions, but the continued increases in global long-term mean temperatures and the apparent ending of the Pacific Decadal Oscillation (PDO cool phase have increased the risk of bleaching events. Climate models and observations predict that bleaching in Hawaiʻi will occur with increasing frequency and increasing severity over future decades. A freshwater “kill” event occurred during July 2014 in the northern part of Kāneʻohe Bay that reduced coral cover by 22.5% in the area directly impacted by flooding. A subsequent major bleaching event during September 2014 caused extensive coral bleaching and mortality throughout the bay and further reduced coral cover in the freshwater kill area by 60.0%. The high temperature bleaching event only caused a 1.0% reduction in live coral throughout the portion of the bay not directly impacted by the freshwater event. Thus, the combined impact of the low salinity event and the thermal bleaching event appears to be more than simply additive. The temperature regime during the September 2014 bleaching event was analogous in duration and intensity to that of the large bleaching event that occurred previously during August 1996, but resulted in a much larger area of bleaching and coral mortality. Apparently seasonal timing as well as duration and magnitude of heating is important. Coral spawning in the dominant coral species occurs early in the summer, so reservoirs of stored lipid in the corals had been depleted by spawning prior to the September 2014 event. Warm months above 27 °C result in lower coral growth and presumably could further decrease lipid reserves, leading to a bleaching event that was more severe than would have happened if the high temperatures occurred earlier in the summer. Hawaiian reef corals decrease skeletal growth at temperatures above 27 °C, so perhaps the “stress period

  4. Coral bleaching under thermal stress: putative involvement of host/symbiont recognition mechanisms

    Directory of Open Access Journals (Sweden)

    Tambutte Sylvie

    2009-08-01

    Full Text Available Abstract Background Coral bleaching can be defined as the loss of symbiotic zooxanthellae and/or their photosynthetic pigments from their cnidarian host. This major disturbance of reef ecosystems is principally induced by increases in water temperature. Since the beginning of the 1980s and the onset of global climate change, this phenomenon has been occurring at increasing rates and scales, and with increasing severity. Several studies have been undertaken in the last few years to better understand the cellular and molecular mechanisms of coral bleaching but the jigsaw puzzle is far from being complete, especially concerning the early events leading to symbiosis breakdown. The aim of the present study was to find molecular actors involved early in the mechanism leading to symbiosis collapse. Results In our experimental procedure, one set of Pocillopora damicornis nubbins was subjected to a gradual increase of water temperature from 28°C to 32°C over 15 days. A second control set kept at constant temperature (28°C. The differentially expressed mRNA between the stressed states (sampled just before the onset of bleaching and the non stressed states (control were isolated by Suppression Subtractive Hybridization. Transcription rates of the most interesting genes (considering their putative function were quantified by Q-RT-PCR, which revealed a significant decrease in transcription of two candidates six days before bleaching. RACE-PCR experiments showed that one of them (PdC-Lectin contained a C-Type-Lectin domain specific for mannose. Immunolocalisation demonstrated that this host gene mediates molecular interactions between the host and the symbionts suggesting a putative role in zooxanthellae acquisition and/or sequestration. The second gene corresponds to a gene putatively involved in calcification processes (Pdcyst-rich. Its down-regulation could reflect a trade-off mechanism leading to the arrest of the mineralization process under stress

  5. Potassium-titanyl-phosphate (KTP Laser and Dental Bleaching. Literature review.

    Directory of Open Access Journals (Sweden)

    Consuelo Arce

    2013-12-01

    Full Text Available ABSTRACT Objective: To determinate if dental bleaching with KTP laser is a safe, effective and efficient technique. The use of KTP laser for dental bleaching was only investigated in combination with a high concentration of hydrogen peroxide (35%. The recommended protocol was: for the use of KTP laser at 3W power and an irradiation time of ten seconds, three to four cycles are needed. For a power of 1W and an irradiation time of thirty seconds the number of cycles is three with a maximum of four. Under these conditions KTP laser bleaching was considered not to alter surface morphology, to have no influence on enamel microhardness, to maintain the pulp temperature within normal values, to obtain lighter tooth color which can be maintained for months (no long term studies were conducted. Because the bleaching effect was obtained in a short period of time and maintained for months, KTP laser bleaching was considered an effective and efficient technique. Conclusion: KTP-assisted dental bleaching is a safe, effective and efficient technique when combined with high concentration of hydrogen peroxide. RESUMEN Láser Potasio-Titanil-Fosfato (KTP y Blanqueamiento Dental. Revisión narrativa.Resumen: Objetivo: Determinar si el blanqueamiento dental con láser KTP es una técnica segura, efectiva y eficiente. El uso de láser KTP para blanqueamiento dental fue solo investigado en combinación con una alta concentración de peróxido de hidrogeno (35%. El protocolo recomendado fue: para el uso de láser KTP a 3W de potencia y un tiempo de irradiación de diez segundos, tres a cuatro repeticiones son necesarias. Para una potencia de 1W y un tiempo de irradiación de treinta segundos, el número de repeticiones son tres con un máximo de cuatro veces. Bajo estas condiciones, el blanqueamiento dental con esta técnica no altera la morfología de la superficie dental, no tiene influencia en la microdureza del esmalte, mantiene la temperatura pulpar dentro de

  6. Intensity dependent absorption bleaching of high subband excitons in GaAs/AlGaAs multiple quantum wells

    CERN Document Server

    Shin, S H; Lee, E H; Chae, K M; Park, S H; Kim, U

    1998-01-01

    We have investigated the influence of carrier generation on the absorption bleaching of the n=2 and n=3 excitons in GaAs/AlGaAs multiple quantum wells (MQWs). With the excitation near the resonance of the n=1 exciton absorption, the long range coulomb screening and collision broadening had significant effects on the exciton bleaching. At low excitation intensity, the absorption bleaching of the n=2 exciton in 75 A-thick MQWs and that of the n=3 exciton in 150 A-thick MQWs were due to linewidth broadening by the collision broadening effect only. At high excitation intensity, however, the reduction of oscillator strength due to the long range coulomb screening contributed dominantly to absorption bleaching.

  7. Surface effects after a combination of dental bleaching and enamel microabrasion: An in vitro and in situ study.

    Science.gov (United States)

    Franco, Laura Molinar; Machado, Lucas Silveira; Salomão, Fabio Martins; Dos Santos, Paulo Henrique; Briso, André Luiz Fraga; Sundfeld, Renato Herman

    2016-01-01

    This study evaluated the effects of combining enamel microabrasion and dental bleaching on the physical properties of enamel, using in vitro and in situ conditions and evaluating surface roughness, enamel microhardness and scanning electron microscopy images. One hundred sound bovine teeth were sectioned and cut into discs and randomly divided into 10 study groups (n=10). The results were submitted to Analysis of Variance (ANOVA) for repeated measures, followed by the Tukey test, with significance at 5%. Enamel surface roughness was significantly influenced by microabrasion, regardless of being combined with dental bleaching, for both HS (Human Saliva) or AS (Artificial Saliva) condition. Enamel microhardness was significantly decreased in the groups in which enamel microabrasion was performed, regardless its combination with dental bleaching; although storage in HS reestablished the initial enamel microhardness. It was concluded that dental bleaching does not cause major damage to microabraided enamel, and that only human saliva recovered the initial enamel microhardness.

  8. Comparative evaluation of two different remineralizing agents on the microhardness of bleached enamel surface: Results of an in vitro study

    Directory of Open Access Journals (Sweden)

    Gunpriya Kaur

    2015-01-01

    Conclusion: Both GC Tooth Mousse (Recaldent and Toothmin Tooth cream (Abbott Healthcare Pvt.Ltd increase the microhardness of bleached enamel. Toothmin tooth cream is a better agent for increasing microhardness, although difference is not significant.

  9. In vivo Microscale Measurements of Light and Photosynthesis during Coral Bleaching: Evidence for the Optical Feedback Loop?

    Science.gov (United States)

    Wangpraseurt, Daniel; Holm, Jacob B; Larkum, Anthony W D; Pernice, Mathieu; Ralph, Peter J; Suggett, David J; Kühl, Michael

    2017-01-01

    Climate change-related coral bleaching, i.e., the visible loss of zooxanthellae from the coral host, is increasing in frequency and extent and presents a major threat to coral reefs globally. Coral bleaching has been proposed to involve accelerating light stress of their microalgal endosymbionts via a positive feedback loop of photodamage, symbiont expulsion and excess in vivo light exposure. To test this hypothesis, we used light and O2 microsensors to characterize in vivo light exposure and photosynthesis of Symbiodinium during a thermal stress experiment. We created tissue areas with different densities of Symbiodinium cells in order to understand the optical properties and light microenvironment of corals during bleaching. Our results showed that in bleached Pocillopora damicornis corals, Symbiodinium light exposure was up to fivefold enhanced relative to healthy corals, and the relationship between symbiont loss and light enhancement was well-described by a power-law function. Cell-specific rates of Symbiodinium gross photosynthesis and light respiration were enhanced in bleached P. damicornis compared to healthy corals, while areal rates of net photosynthesis decreased. Symbiodinium light exposure in Favites sp. revealed the presence of low light microniches in bleached coral tissues, suggesting that light scattering in thick coral tissues can enable photoprotection of cryptic symbionts. Our study provides evidence for the acceleration of in vivo light exposure during coral bleaching but this optical feedback mechanism differs between coral hosts. Enhanced photosynthesis in relation to accelerating light exposure shows that coral microscale optics exerts a key role on coral photophysiology and the subsequent degree of radiative stress during coral bleaching.

  10. Effect of 10% sodium bicarbonate on bond strength of enamel and dentin after bleaching with 38% hydrogen peroxide

    Directory of Open Access Journals (Sweden)

    Fernanda Medeiros Darzé

    Full Text Available AbstractIntroductionBy-products of hydrogen peroxide degradation released during dental bleaching influence the polymerization of adhesive systems and composite resins, causing a reduction in shear bond strength to the tooth.Objectivethe aim of this article was to evaluate the effect of 10% sodium bicarbonate (SB, applied for different lengths of time, on the shear bond strength to enamel and dentin after bleaching.Material and methodEnamel and dentin blocks were divided into groups (n=10: (1 control: no bleaching; (2 immediate: bleaching immediately followed by restoration; (3 14-day: bleaching, restoration 14 days later; (4 SB for 10 minutes: bleaching, SB gel for 10 minutes, immediately followed by restoration; (5 SB for 20 minutes: bleaching, SB gel for 20 minutes, immediately followed by restoration. A 38% hydrogen peroxide gel (Opalescence Boost/Ultradent was used. After application of the adhesive system, composite resin cylinders were mounted on the surface of the substrates in order to test shear bond strength. Result: ANOVA and Tukey tests showed significantly higher mean enamel bond strength values for the 14-day follow-up group and without significant differences for control group. Mean bond strength values obtained for the other groups were intermediate. When testing dentin, the Tukey test revealed a significantly higher mean bond strength value for the 14-day follow-up group when compared with application of SB for 20 minutes.ConclusionSB gel applied was unable to reverse the low bond strength to enamel and dentin after bleaching treatment.

  11. In vivo Microscale Measurements of Light and Photosynthesis during Coral Bleaching: Evidence for the Optical Feedback Loop?

    Science.gov (United States)

    Wangpraseurt, Daniel; Holm, Jacob B.; Larkum, Anthony W. D.; Pernice, Mathieu; Ralph, Peter J.; Suggett, David J.; Kühl, Michael

    2017-01-01

    Climate change-related coral bleaching, i.e., the visible loss of zooxanthellae from the coral host, is increasing in frequency and extent and presents a major threat to coral reefs globally. Coral bleaching has been proposed to involve accelerating light stress of their microalgal endosymbionts via a positive feedback loop of photodamage, symbiont expulsion and excess in vivo light exposure. To test this hypothesis, we used light and O2 microsensors to characterize in vivo light exposure and photosynthesis of Symbiodinium during a thermal stress experiment. We created tissue areas with different densities of Symbiodinium cells in order to understand the optical properties and light microenvironment of corals during bleaching. Our results showed that in bleached Pocillopora damicornis corals, Symbiodinium light exposure was up to fivefold enhanced relative to healthy corals, and the relationship between symbiont loss and light enhancement was well-described by a power-law function. Cell-specific rates of Symbiodinium gross photosynthesis and light respiration were enhanced in bleached P. damicornis compared to healthy corals, while areal rates of net photosynthesis decreased. Symbiodinium light exposure in Favites sp. revealed the presence of low light microniches in bleached coral tissues, suggesting that light scattering in thick coral tissues can enable photoprotection of cryptic symbionts. Our study provides evidence for the acceleration of in vivo light exposure during coral bleaching but this optical feedback mechanism differs between coral hosts. Enhanced photosynthesis in relation to accelerating light exposure shows that coral microscale optics exerts a key role on coral photophysiology and the subsequent degree of radiative stress during coral bleaching. PMID:28174567

  12. Impact of mass coral bleaching on reef fish community and fishermen catches at Sabang, Aceh Province, Indonesia

    OpenAIRE

    Edi Rudi; Taufiq Iskandar; Nur Fadli; Hidayati Hidayati

    2012-01-01

    Mass coral bleaching was observed at Sabang, Aceh in early 2010, and approximately 60% ofhard coral in waters surrounding Sabang died post-event. Coral mortality was expected to affect thecomposition of reef fish due to decrease its function such as providing a shelter, feeding and spawninggrounds for fish and other marine organisms. The objectives of this research were to evaluate the impactof coral bleaching on coral reef fish community and to compare the composition of fishermen catchesbef...

  13. Improved sensitivity, safety and laboratory turnaround time in the diagnosis of pulmonary tuberculosis by use of bleach sedimentation

    Directory of Open Access Journals (Sweden)

    Ameh James

    2015-05-01

    Full Text Available Background: Inadequate diagnostic processes and human resources in laboratories contribute to a high burden of tuberculosis (TB in low- and middle-income countries. Direct smear microscopy is relied on for TB diagnosis; however, sensitivity rates vary. To improve sensitivity of direct microscopy, the researchers employed several approaches, including sputum digestion and concentration of acid-fast bacilli (AFB, a technique which uses commercial bleach.Objectives: This study compared methods used to diagnose active Mycobacterium tuberculosis infections.Methods: Three sputum specimens were collected from each of 340 participants in Abuja, Nigeria, over two consecutive days. Direct microscopy was performed on all specimens; following microscopy, one specimen from each patient was selected randomly for bleach sedimentation and one for Lowenstein-Jensen culture.Results: Direct microscopy produced 28.8% AFB-positive results, whilst bleach sedimentation resulted in 30.3%. When compared with the cultures, 26.5% were AFB true positive using direct microscopy and 27.1% using bleach sedimentation. Whilst the specificity rate between these two methods was not statistically significant (P = 0.548, the sensitivity rate was significant (P = 0.004.Conclusion: Based on these results, bleach increases the sensitivity of microscopy compared with direct smear and has similar specificity. When diagnosing new cases of pulmonary TB, one bleach-digested smear is as sensitive as three direct smears, reducing waiting times for patients and ensuring the safety of laboratory technicians.

  14. Administration of ascorbic acid to prevent bleaching-induced tooth sensitivity: a randomized triple-blind clinical trial.

    Science.gov (United States)

    de Paula, E A; Kossatz, S; Fernandes, D; Loguercio, A D; Reis, A

    2014-01-01

    This study evaluated the effect of ascorbic acid, 500 mg every eight hours, on bleaching-induced tooth sensitivity. A triple-blind, parallel design, and placebo-controlled randomized clinical trial was conducted on 39 adults. The pills (placebo or ascorbic acid) were administered three times per day for 48 hours; the first dose was given one hour prior to each bleaching session. Two bleaching sessions with 35% hydrogen peroxide gel were performed with a one-week interval. Tooth sensitivity was recorded up to 48 hours after bleaching. The color evaluation was performed before and 30 days after bleaching. The absolute risk and intensity of tooth sensitivity were evaluated by Fisher exact and Mann-Whitney U-tests, respectively. Color changes were evaluated by unpaired t-test (α=0.05). There were no significant differences in the absolute risk and intensity of tooth sensitivity and color change between the groups. Both groups showed a similar risk of tooth sensitivity (p>0.05). The perioperative use of an antioxidant, such as ascorbic acid (500 mg, three times daily) perorally, was not able to prevent bleaching-induced tooth sensitivity or reduce its intensity.

  15. Efficacy of and effect on tooth sensitivity of in-office bleaching gel concentrations: a randomized clinical trial.

    Science.gov (United States)

    Reis, A; Kossatz, S; Martins, G C; Loguercio, A D

    2013-01-01

    With the aim of reducing the side effects of in-office bleaching agents, less-concentrated hydrogen peroxide (HP) gels have been released by manufacturers. We evaluated the tooth sensitivity (TS) and bleaching efficacy (BE) of two HP concentrations in this study. Gels containing 35% and 20% HP (HP35 and HP20, respectively) were applied on teeth of 60 caries-free patients. Color was recorded at baseline and one week after the first and second bleaching sessions using the Vita Classical shade guide. TS was recorded on a 0-4 scale. BE at each weekly recall was evaluated by Kruskall-Wallis and Mann-Whitney tests (α=0.05). Absolute risk of TS and its intensity was evaluated by Fisher exact and Mann-Whitney tests, respectively (α=0.05). After two bleaching sessions, color change of approximately eight tabs was obtained with HP35; whereas, with HP20 it was six tabs (p<0.05). Only 26.7% (HP35) and 16.7% (HP20) of the participants reported TS, and no statistical differences were detected among them. Both in-office bleaching gels showed similar TS intensity, but the 35% HP agent produced faster bleaching.

  16. Effectiveness of nano-calcium phosphate paste on sensitivity during and after bleaching: a randomized clinical trial.

    Science.gov (United States)

    Loguercio, Alessandro Dourado; Tay, Lidia Yileng; Herrera, Daniel Rodrigo; Bauer, Jose; Reis, Alessandra

    2015-01-01

    The study aimed to evaluate the effectiveness of in-office bleaching and associated tooth sensitivity on application of nano-calcium phosphate paste as desensitizing agent. Bleaching was performed with 35% hydrogen peroxide gel in 40 patients who were randomly divided into placebo and nano-calcium phosphate paste groups. Bleaching efficacy (BE) was evaluated using a value-oriented Vita shade guide. Tooth sensitivity was recorded using a numeric rating scale (0-4) during bleaching and up to 48 h after each session. The primary outcome of absolute risk of tooth sensitivity was compared using the Fisher's exact test (α = 0.05). The intensity of tooth sensitivity and the efficacy of in-office bleaching were also statistically evaluated. No significant differences in absolute risk and intensity of tooth sensitivity were detected between the groups (p = 1.0 and p = 0.53, respectively). BE was also found to be similar between the groups (p = 0.67). Although the use of a nano-calcium phosphate paste associated with fluoride and potassium nitrate did not influence the whitening outcome, but it also did not reduce bleaching-induced tooth sensitivity.

  17. Effects of new formulas of bleaching gel and fluoride application on enamel microhardness: an in vitro study.

    Science.gov (United States)

    da Costa, Juliana B; Mazur, Rui Fernando

    2007-01-01

    This in vitro study evaluated the new formulas of bleaching products and the effect of subsequent applications of fluoride on the hardness of enamel during and after tooth bleaching. The crowns of 60 extracted intact human molars were sectioned longitudinally; the buccal part was embedded in acrylic resin, the occlusal part was ground flat, exposing enamel and dentin, and then polished. Baseline Knoop microhardness (KHN) of enamel was determined. The specimens were then randomly divided into six groups of 10 specimens, and each group was assigned to a specific 10% carbamide peroxide (CP) bleaching agent. A: Opalescence, B: Opalescence PF (3% potassium nitrate and 0.11% fluoride), C: Nite White Excel 3 (ACP), D: Opalescence + F (acidulated phosphate fluoride 1.23%), E: Opalescence PF + F, F: Nite White Excel 3 + F. The teeth were bleached for eight hours; after each procedure, the specimens were stored in artificial saliva at 37 degrees C. Immediately after day 21 of bleaching, the specimens in groups D, E and F received fluoride 1.23% for five minutes. KHN tests w ere performedbefore (baseline = control), during (14, 21) and two weeks (35 days) after the bleaching procedure and were statistically compared using ANOVA/Tukey's t-test (alpha formulas, the enamel was restored to a value similar to baseline.

  18. Impact of mass coral bleaching on reef fish community and fishermen catches at Sabang, Aceh Province, Indonesia

    Directory of Open Access Journals (Sweden)

    Edi Rudi

    2012-12-01

    Full Text Available Mass coral bleaching was observed at Sabang, Aceh in early 2010, and approximately 60% ofhard coral in waters surrounding Sabang died post-event. Coral mortality was expected to affect thecomposition of reef fish due to decrease its function such as providing a shelter, feeding and spawninggrounds for fish and other marine organisms. The objectives of this research were to evaluate the impactof coral bleaching on coral reef fish community and to compare the composition of fishermen catchesbefore and after the coral bleaching. The data were collected before (in 2008 and after (in 2010 themass coral bleaching event in Sabang waters by using a photographic method and the data on theaverage catch of fishermen (catch per fishing effort was calculated in kg/hour. The data of theknowledge of fishermen on climate change was collected by questionnaire method. The results showedthat 259 species of coral reef fishes were caught by fishermen in 2008 and 2010. There was nosignificantly difference between the fish catches before and after the mass coral bleaching. However,species richness decreased up to 50% after the mass coral bleaching. The knowledge of fishermen onclimate change issue was very low.

  19. Coral bleaching in the Caramuanas reef (Todos os Santos Bay, Brazil during the 2010 El Niño event

    Directory of Open Access Journals (Sweden)

    Ricardo J Miranda

    2013-04-01

    Full Text Available Episodes of coral bleaching related to El Niño events have been increasing in frequency and severity. This phenomenon is cited as a major cause of degradation of coral reefs. This study evaluates the effects of coral bleaching on the Caramuanas reef community, which occurred during the southern hemisphere summer of 2009/2010. Within this period the sea surface temperature of 31°C and thermal anomalies up to almost 1°C were recorded. During and after this El Niño event, frequency and severity of bleaching, live coral cover, number of colonies, class size, disease occurrence, and mortality rate were monitored on corals larger than 20 cm in diameter. The samples were taken at twelve fixed transects, in three reef stations. Statistical analysis showed that the severity of bleaching was different between the two periods, during and after the 2010 ENSO event. The Caramuanas reef showed sublethal bleaching effects indicating that this reef is tolerant to bleaching when the temperature anomalies do not exceed 0.75°C within one week.

  20. ReefTemp: An interactive monitoring system for coral bleaching using high-resolution SST and improved stress predictors

    Science.gov (United States)

    Maynard, Jeffrey A.; Turner, Peter J.; Anthony, Kenneth R. N.; Baird, Andrew H.; Berkelmans, Ray; Eakin, C. Mark; Johnson, Johanna; Marshall, Paul A.; Packer, Gareck R.; Rea, Anthony; Willis, Bette L.

    2008-03-01

    Anomalously high sea surface temperatures (SST) have led to repeated mass coral bleaching events on a global scale. Existing satellite-based systems used to monitor conditions conducive to bleaching are based on low-resolution (0.5°, ~50 km) SST data. While these systems have served the research and management community well, they have inherent weaknesses that limit their capacity to predict stress on coral reefs at local scales, over which bleaching severity is known to vary dramatically. Here we discuss the development and testing of ReefTemp, a new operational remote sensing application for the Great Barrier Reef that assesses bleaching risk daily using: high-resolution (2 km) SST, regionally validated thermal stress indices, and color-graded legends directly related to past observations of bleaching severity. Given projections of sea temperature rise, ReefTemp is timely as it can accurately predict bleaching severity at a local scale and therefore help to give focus to future research and monitoring efforts.

  1. Effectiveness of nano-calcium phosphate paste on sensitivity during and after bleaching: a randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Alessandro Dourado LOGUERCIO

    2015-01-01

    Full Text Available The study aimed to evaluate the effectiveness of in-office bleaching and associated tooth sensitivity on application of nano-calcium phosphate paste as desensitizing agent. Bleaching was performed with 35% hydrogen peroxide gel in 40 patients who were randomly divided into placebo and nano-calcium phosphate paste groups. Bleaching efficacy (BE was evaluated using a value-oriented Vita shade guide. Tooth sensitivity was recorded using a numeric rating scale (0–4 during bleaching and up to 48 h after each session. The primary outcome of absolute risk of tooth sensitivity was compared using the Fisher’s exact test (α = 0.05. The intensity of tooth sensitivity and the efficacy of in-office bleaching were also statistically evaluated. No significant differences in absolute risk and intensity of tooth sensitivity were detected between the groups (p = 1.0 and p = 0.53, respectively. BE was also found to be similar between the groups (p = 0.67. Although the use of a nano-calcium phosphate paste associated with fluoride and potassium nitrate did not influence the whitening outcome, but it also did not reduce bleaching-induced tooth sensitivity.

  2. Stable mucus-associated bacterial communities in bleached and healthy corals of Porites lobata from the Arabian Seas

    KAUST Repository

    Hadaidi, Ghaida

    2017-03-31

    Coral reefs are subject to coral bleaching manifested by the loss of endosymbiotic algae from coral host tissue. Besides algae, corals associate with bacteria. In particular, bacteria residing in the surface mucus layer are thought to mediate coral health, but their role in coral bleaching is unknown. We collected mucus from bleached and healthy Porites lobata colonies in the Persian/Arabian Gulf (PAG) and the Red Sea (RS) to investigate bacterial microbiome composition using 16S rRNA gene amplicon sequencing. We found that bacterial community structure was notably similar in bleached and healthy corals, and the most abundant bacterial taxa were identical. However, fine-scale differences in bacterial community composition between the PAG and RS were present and aligned with predicted differences in sulfur- and nitrogen-cycling processes. Based on our data, we argue that bleached corals benefit from the stable composition of mucus bacteria that resemble their healthy coral counterparts and presumably provide a conserved suite of protective functions, but monitoring of post-bleaching survival is needed to further confirm this assumption. Conversely, fine-scale site-specific differences highlight flexibility of the bacterial microbiome that may underlie adjustment to local environmental conditions and contribute to the widespread success of Porites lobata.

  3. REPLACEMENT OF SOFTWOOD KRAFT PULP WITH ECF-BLEACHED BAMBOO KRAFT PULP IN FINE PAPER

    Directory of Open Access Journals (Sweden)

    Guanglei Zhao

    2010-06-01

    Full Text Available Non-wood fibers such as bamboo and wheat straw have been playing important roles in the pulp and paper industry in China. In this study an ECF-bleached bamboo kraft pulp was compared with a bleached softwood kraft pulp (NBSK as the reinforcement pulp in fine paper production. Areas that were examined include the refining of pure fibers, influence of bamboo on dewatering, retention, and sizing. The influence of bamboo kraft pulp as a part of a furnish replacing NBSK was compared as well. Results show that fiber shortening was more prominent with bamboo when refined. This resulted in a higher amount of fines, and addition wet-end chemicals may be required to compensate. Handsheets with bamboo as a reinforcement fiber showed similar mechanical and optical properties to handsheets containing NBSK.

  4. Detergents and bleaches are sources of chromium contact dermatitis in Israel

    DEFF Research Database (Denmark)

    Ingber, A; Gammelgaard, Bente; David, M

    1998-01-01

    Total chromium levels were determined in 38 detergents and 12 bleaches on the market in Israel (45 locally produced, 5 imported). The samples were analyzed by Zeeman-corrected graphite furnace atomic absorption spectrophotometry. Chromium levels were higher than 5 ppm in 28 (56%) of the 50 products......, from 1 to 5 ppm in 16 (32%), and lower than 1 ppm in only 6 (12%). Among the 5 imported products, only 1 had a chromium level below 1 ppm and the other 4 (1 from Germany, 3 from the USA) had high levels. Since a most 90% of the detergents and bleaches examined contained chromium levels higher than 1...... ppm, it is concluded that these consumer products may be the cause of the high incidence of chromium sensitivity in Israel....

  5. Anthropogenic mortality on coral reefs in Caribbean Panama predates coral disease and bleaching.

    Science.gov (United States)

    Cramer, Katie L; Jackson, Jeremy B C; Angioletti, Christopher V; Leonard-Pingel, Jill; Guilderson, Thomas P

    2012-06-01

    Caribbean reef corals have declined precipitously since the 1980s due to regional episodes of bleaching, disease and algal overgrowth, but the extent of earlier degradation due to localised historical disturbances such as land clearing and overfishing remains unresolved. We analysed coral and molluscan fossil assemblages from reefs near Bocas del Toro, Panama to construct a timeline of ecological change from the 19th century-present. We report large changes before 1960 in coastal lagoons coincident with extensive deforestation, and after 1960 on offshore reefs. Striking changes include the demise of previously dominant staghorn coral Acropora cervicornis and oyster Dendrostrea frons that lives attached to gorgonians and staghorn corals. Reductions in bivalve size and simplification of gastropod trophic structure further implicate increasing environmental stress on reefs. Our paleoecological data strongly support the hypothesis, from extensive qualitative data, that Caribbean reef degradation predates coral bleaching and disease outbreaks linked to anthropogenic climate change.

  6. Effect of intracoronal bleaching agents on ultrastructure and mineral content of dentin

    Directory of Open Access Journals (Sweden)

    Fatemeh Maleknejad

    2012-01-01

    Full Text Available Aim: The purpose of this in vitro study was to evaluate the ultrastructural changes of dentin induced after exposure to different intracoronal tooth bleaching agents. Materials and Methods: Dental discs of 1 mm thickness were prepared from coronal dentin of sixty-four human maxillary premolars. Experimental specimens were divided into four subgroups: 45% carbamide peroxide, 35% hydrogen peroxide, sodium perborate + 30% hydrogen peroxide, sodium perborate + water. The specimens were then evaluated under scanning electron microscope to determine diameter of dentinal tubules and chemical analysis. Results: There was significant difference between dentinal tubule diameter of all test and control groups with the exception of sodium perborate + water. Chemical analysis revealed that there was no significant difference between experimental subgroups regarding calcium and sulfur wt%. Conclusions: All bleaching agents increased dentinal tubule diameter and promote alterations in mineral content of dentin with the exception of Sodium perborate mixed with water.

  7. Guest-host interactions in the alkaline bleaching of triphenylmethane dyes catalysed by -cyclodextrin

    Indian Academy of Sciences (India)

    V Raj; A Sarathi; T Chandrakala; S Dhanalakshmi; R Sudha; K Rajasekaran

    2009-07-01

    The rates of alkaline bleaching of triphenylmethane dyes crystal violet (CV), malachite green (MG) and rosaniline (RA) have been measured spectrophotometrically in an aqueous medium at 30°C in the presence of -cyclodextrin (CD). At lower concentrations of CD, CV forms productive 1 : 1 (G : H) complex. At higher concentrations of CD, it forms unproductive 1 : 2 (G : H) complex. For the bleaching of MG, CD accelerates or decelerates the rate depending on pH of the medium by forming 1 : 1 (G : H) inclusion complex. Analysis of rate data shows that MG undergoes fading by mixed order process. CD decelerates the water reaction and accelerates hydroxide ion reaction. In the case of RA, both water reaction as well as hydroxide ion reaction are retarded by CD by the formation of inclusion complex.

  8. Papermaking fibers from giant reed (Arundo donax L. by advanced ecologically friendly pulping and bleaching technologies

    Directory of Open Access Journals (Sweden)

    Pereira, H.

    2006-07-01

    Full Text Available The anatomical structure and chemical composition of the stem-wall material of giant reed is considered from the viewpoint of raw material characterization for industrial fiber production. The effect of stem morphology (nodes and internodes on pulping results and general pulp properties is discussed. The advantages of application of modern organic solvent based (organosolv pulping technologies to giant reed are shown in comparison with the conventional (kraft method. The conditions optimization for Ethanol-Alkali pulping (a selected organosolv pulping process is given, and the chemical kinetics of the principal macromolecular components during ethanol-alkali pulping is described. The bleachability of organosolv pulps by short totally chlorine free (TCF bleaching sequences using hydrogen peroxide and ozone as the active bleaching chemicals without pulp pre-delignification is examined and compared with kraft pulps. The enzymatic pre-treatment of reed organosolv pulps by commercial xylanase preparation is considered as a possibility toward the improvement of pulp bleachability.

  9. Occupational eczema and asthma in a hairdresser caused by hair-bleaching products

    DEFF Research Database (Denmark)

    Hougaard, Majken G; Menné, Torkil; Søsted, Heidi

    2012-01-01

    understood. The specific inhalation challenge test is considered to be the gold standard for diagnosing occupational asthma and rhinitis. However, this test is not always accessible. Therefore, the diagnosis of occupational allergic asthma caused by persulfate salts is made by combining a clinical history......, a diagnosis of asthma, and a positive skin prick test (SPT). Standardized methods for performing SPT with persulfate salts are warranted. A case of a young hairdresser with occupational asthma and hand eczema caused by persulfate salts is presented, and the procedure for performing the SPT with ammonium......Occupational allergic contact eczema and asthma caused by bleaching agents is seen in hairdressers. Bleaching agents contain persulfate salts, which are known to induce immediate reactions such as rhinitis, asthma, contact urticaria, and anaphylaxis. The immunologic mechanism is not, however, fully...

  10. Occupational eczema and asthma in a hairdresser caused by hair-bleaching products.

    Science.gov (United States)

    Hougaard, Majken G; Menné, Torkil; Søsted, Heidi

    2012-01-01

    Occupational allergic contact eczema and asthma caused by bleaching agents is seen in hairdressers. Bleaching agents contain persulfate salts, which are known to induce immediate reactions such as rhinitis, asthma, contact urticaria, and anaphylaxis. The immunologic mechanism is not, however, fully understood. The specific inhalation challenge test is considered to be the gold standard for diagnosing occupational asthma and rhinitis. However, this test is not always accessible. Therefore, the diagnosis of occupational allergic asthma caused by persulfate salts is made by combining a clinical history, a diagnosis of asthma, and a positive skin prick test (SPT). Standardized methods for performing SPT with persulfate salts are warranted. A case of a young hairdresser with occupational asthma and hand eczema caused by persulfate salts is presented, and the procedure for performing the SPT with ammonium persulfate and potassium persulfate is described in detail.

  11. Reduced bleaching in organic nanofibers by bilayer polymer/oxide coating

    DEFF Research Database (Denmark)

    Tavares, Luciana; Kjelstrup-Hansen, Jakob; Rubahn, Horst-Günter

    2010-01-01

    , and tunability through synthetic chemistry. Phenylene-based molecules such as para-hexaphenylene (p6P) are of particular interest due to their ability to self-assemble into elongated, nanoscale, crystalline aggregates or ‘nanofibers’ [1]. Such nanofibers can emit polarized light with a highly anisotropic....... These treatments caused a reduction of the bleaching reaction but in addition, the nanofiber luminescence spectrum was significantly altered. It was observed that some polymer coatings (P(TFE-PDD), and PMMA) do not interfere with the luminescence spectrum from the p6P but are not effective in stopping...... the bleaching. Bilayer coatings with first a polymer material, which should work as a protection layer to avoid modifications of the p6P luminescence spectrum, and second an oxide layer used as oxygen blocker were tested and it was found that a particular bilayer polymer/oxide combination results...

  12. Bleach-Imaged Plasmon Propagation (BlIPP) in Single Gold Nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Solis, David [Rice Univ., Houston, TX (United States). Lab. for Nanophotonics, Dept. of Electrical and Computer Engineering; Chang, Wei-Shun [Rice Univ., Houston, TX (United States). Lab. for Nanophotonics, Dept. of Chemistry; Khanal, Bishnu P. [Rice Univ., Houston, TX (United States). Lab. for Nanophotonics, Dept. of Chemistry; Bao, Kui [Rice Univ., Houston, TX (United States). Lab. for Nanophotonics, Dept. of Physics and Astronomy; Nordlander, Peter [Rice Univ., Houston, TX (United States). Lab. for Nanophotonics, Dept. of Physics and Astronomy, Dept. of Electrical and Computer Engineering; Zubarev, Eugene R. [Rice Univ., Houston, TX (United States). Lab. for Nanophotonics, Dept. of Chemistry, Dept. of Electrical and Computer Engineering; Link, Stephan

    2010-08-13

    Here, we present a novel approach to visualize propagating surface plasmon polaritons through plasmon-exciton interactions between single gold nanowires and a thin film of a fluorescent polymer. A plasmon polariton was launched by exciting one end of a single gold nanowire with a 532 nm laser. The local near-field of the propagating plasmon modes caused bleaching of the polymer emission. The degree of photobleaching along the nanowire could be correlated with the propagation distance of the surface plasmon polaritons. Using this method of bleach-imaged plasmon propagation (BlIPP), we determined a plasmon propagation distance of 1.8 ± 0.4 μm at 532 nm for chemically grown gold nanowires. Our results are supported by finite difference time domain electromagnetic simulations.

  13. Solar treatment of cork boiling and bleaching wastewaters in a pilot plant.

    Science.gov (United States)

    Vilar, Vítor J P; Maldonado, Manuel I; Oller, I; Malato, Sixto; Boaventura, Rui A R

    2009-09-01

    This paper reports on cork boiling and bleaching wastewaters treatment by solar photocatalytic processes, TiO(2)/UV and Fe(2+)/H(2)O(2)/UV (TiO(2)-only for bleaching wastewater), in a pilot plant with compound parabolic collectors. The photo-Fenton reaction (k=0.12L/kJ(UV), r(0)=59.4 mg/kJ(UV)) is much more efficient that TiO(2) photocatalysis and TiO(2)+S(2)O(8)(2-) (k=0.0024 L/kJ(UV), r(0)=1.36 mg/kJ(UV)), leading to 94% mineralization of the bleaching wastewater after 31.5 kJ(UV)/L, consuming 77.1mM of H(2)O(2) (3.0 mmol/kJ(UV)) and using 20 mg/L of iron. For the cork boiling wastewater, after a slow initial reaction rate, the DOC degradation curve shows a first-order kinetics behaviour (k=0.015 L/kJ(UV), r(0)=20.8 mg/kJ(UV)) until 173 kJ(UV)/L ( approximately 300 mgC/L). According to the average oxidation state (AOS), toxicity profiles, respirometry and kinetic results obtained in two solar CPCs plants, the optimal energy dose estimated for phototreatment to reach a biodegradable effluent is 15 kJ(UV)/L and 114 kJ(UV)/L, consuming 33 mM and 151 mM of H(2)OT:/PGN/ELSEVIER/WR/web/00007490/(2), achieving almost 49% and 48% mineralization of the wastewaters, respectively for the cork bleaching and boiling wastewaters.

  14. Penetration Capacity, Color Alteration and Biological Response of Two In-office Bleaching Protocols.

    Science.gov (United States)

    Cintra, Luciano Tavares Angelo; Benetti, Francine; Ferreira, Luciana Louzada; Gomes-Filho, João Eduardo; Ervolino, Edilson; Gallinari, Marjorie de Oliveira; Rahal, Vanessa; Briso, André Luiz Fraga

    2016-01-01

    Hydrogen peroxide (H2O2) penetrates into the dental hard tissues causing color alteration but also alterations in pulpal tissues. Hard-tissue penetration, color alteration and the pulp response alterations were evaluated for two in-office bleaching protocols with H2O2. For trans-enamel/dentin penetration and color alteration, discs of bovine teeth were attached to an artificial pulp chamber and bleached according to the groups: BLU (20% H2O2 - 1x50 min, Whiteness HP Blue); MAX (35% H2O2 - 3x15 min, Whiteness HP Maxx); Control (1x50 min, placebo). Trans-enamel/dentin penetration was quantified based on the reaction of H2O2 with leucocrystal violet and the color analyzed by CIELab System. Twenty Wistar rats were divided into two groups (BLU and MAX) and their maxillary right molars were treated according to the same protocols of the in vitro study; the maxillary left molars were used as controls. After 2 days, the animals were killed and their maxillae were examined by light microscopy. The inflammation of pulp tissue was scored according to the inflammatory infiltrate (1, absent; 2, mild; 3, moderate; 4, severe/necrosis). Data were analyzed by statistical tests (α=0.05). MAX showed higher trans-enamel/dentinal penetration of H2O2 (p0.05), and different when compared to Control group (p<0.05). MAX showed severe inflammation in the upper thirds of the coronal pulp, and BLU showed moderate inflammation (p<0.05). In-office bleaching protocols using lower concentrations of hydrogen peroxide should be preferred due to their reduced trans-enamel/dentinal penetration since they cause less pulp damage and provide same bleaching efficiency.

  15. Evaluation of Household Bleach as an Ovicide for the Control of Aedes aegypti.

    Science.gov (United States)

    Mackay, Andrew J; Amador, Manuel; Felix, Gilberto; Acevedo, Veronica; Barrera, Roberto

    2015-03-01

    Accumulations of dormant eggs in container habitats allow Aedes aegypti populations to survive harsh environmental conditions and may frustrate control interventions directed at larval and adult life stages. While sodium hypochlorite solutions (NaOCl) have long been recognized as ovicides for use against dengue vectors, the susceptibility of eggs to spray applications has not been robustly evaluated on substrate materials representative of the most frequently utilized artificial container habitats. Experiments were performed under controlled and natural conditions by applying dilutions of household bleach (52.5 ppt NaOCl) as a spray to eggs on plastic, rubber, and concrete surfaces, with and without a smectite clay thickener. Laboratory assays identified the minimum NaOCl concentrations required to eliminate eggs on plastic (10 ppt), rubber (20 ppt) and concrete (20 ppt) surfaces. Addition of smectite clay reduced the minimum effective concentration to 10 ppt NaOCl for all 3 substrates. A minimum exposure period of 24 h was required to completely eliminate egg viability on concrete surfaces, even at the highest NaOCl concentration (52.5 ppt). Field experiments verified that spray application of a 1∶3 dilution of household bleach mixed with smectite clay can reduce egg hatching by ≥ 99% in shaded and sun-exposed plastic containers. Similarly, 4∶1 dilution of household bleach (with or without smectite clay) eliminated ≥ 98% of eggs from concrete surfaces in outdoor, water-filled drums. In this study, we propose a practical, effective and safe strategy for using household bleach to eliminate Ae. aegypti eggs in a range of artificial container habitats.

  16. Lag effects in the impacts of mass coral bleaching on coral reef fish, fisheries, and ecosystems.

    Science.gov (United States)

    Graham, Nicholas A J; Wilson, Shaun K; Jennings, Simon; Polunin, Nicholas V C; Robinson, Jan; Bijoux, Jude P; Daw, Tim M

    2007-10-01

    Recent episodes of coral bleaching have led to wide-scale loss of reef corals and raised concerns over the effectiveness of existing conservation and management efforts. The 1998 bleaching event was most severe in the western Indian Ocean, where coral declined by up to 90% in some locations. Using fisheries-independent data, we assessed the long-term impacts of this event on fishery target species in the Seychelles, the overall size structure of the fish assemblage, and the effectiveness of two marine protected areas (MPAs) in protecting fish communities. The biomass of fished species above the size retained in fish traps changed little between 1994 and 2005, indicating no current effect on fishery yields. Biomass remained higher in MPAs, indicating they were effective in protecting fish stocks. Nevertheless, the size structure of the fish communities, as described with size-spectra analysis, changed in both fished areas and MPAs, with a decline in smaller fish (45 cm). We believe this represents a time-lag response to a reduction in reef structural complexity brought about because fishes are being lost through natural mortality and fishing, and are not being replaced by juveniles. This effect is expected to be greater in terms of fisheries productivity and, because congruent patterns are observed for herbivores, suggests that MPAs do not offer coral reefs long-term resilience to bleaching events. Corallivores and planktivores declined strikingly in abundance, particularly in MPAs, and this decline was associated with a similar pattern of decline in their preferred corals. We suggest that climate-mediated disturbances, such as coral bleaching, be at the fore of conservation planning for coral reefs.

  17. Regulation of apoptotic pathways by Stylophora pistillata (Anthozoa, Pocilloporidae to survive thermal stress and bleaching.

    Directory of Open Access Journals (Sweden)

    Hagit Kvitt

    Full Text Available Elevated seawater temperatures are associated with coral bleaching events and related mortality. Nevertheless, some coral species are able to survive bleaching and recover. The apoptotic responses associated to this ability were studied over 3 years in the coral Stylophora pistillata from the Gulf of Eilat subjected to long term thermal stress. These include caspase activity and the expression profiles of the S. pistillata caspase and Bcl-2 genes (StyCasp and StyBcl-2-like cloned in this study. In corals exposed to thermal stress (32 or 34°C, caspase activity and the expression levels of the StyBcl-2-like gene increased over time (6-48 h and declined to basal levels within 72 h of thermal stress. Distinct transcript levels were obtained for the StyCasp gene, with stimulated expression from 6 to 48 h of 34°C thermal stress, coinciding with the onset of bleaching. Increased cell death was detected in situ only between 6 to 48 h of stress and was limited to the gastroderm. The bleached corals survived up to one month at 32°C, and recovered back symbionts when placed at 24°C. These results point to a two-stage response in corals that withstand thermal stress: (i the onset of apoptosis, accompanied by rapid activation of anti-oxidant/anti-apoptotic mediators that block the progression of apoptosis to other cells and (ii acclimatization of the coral to the chronic thermal stress alongside the completion of symbiosis breakdown. Accordingly, the coral's ability to rapidly curb apoptosis appears to be the most important trait affecting the coral's thermotolerance and survival.

  18. Boring sponges, an increasing threat for coral reefs affected by bleaching events.

    Science.gov (United States)

    Carballo, José L; Bautista, Eric; Nava, Héctor; Cruz-Barraza, José A; Chávez, Jesus A

    2013-04-01

    Coral bleaching is a stress response of corals induced by a variety of factors, but these events have become more frequent and intense in response to recent climate-change-related temperature anomalies. We tested the hypothesis that coral reefs affected by bleaching events are currently heavily infested by boring sponges, which are playing a significant role in the destruction of their physical structure. Seventeen reefs that cover the entire distributional range of corals along the Mexican Pacific coast were studied between 2005/2006, and later between 2009/2010. Most of these coral reefs were previously impacted by bleaching events, which resulted in coral mortalities. Sponge abundance and species richness was used as an indicator of bioerosion, and coral cover was used to describe the present condition of coral reefs. Coral reefs are currently highly invaded (46% of the samples examined) by a very high diversity of boring sponges (20 species); being the coral reef framework the substrate most invaded (56%) followed by the rubbles (45%), and the living colonies (36%). The results also indicated that boring sponges are promoting the dislodgment of live colonies and large fragments from the framework. In summary, the eastern coral reefs affected by bleaching phenomena, mainly provoked by El Niño, present a high diversity and abundance of boring sponges, which are weakening the union of the colony with the reef framework and promoting their dislodgment. These phenomena will probably become even more intense and severe, as temperatures are projected to continue to rise under the scenarios for future climate change, which could place many eastern coral reefs beyond their survival threshold.

  19. The role of transcriptome resilience in resistance of corals to bleaching.

    Science.gov (United States)

    Seneca, Francois O; Palumbi, Stephen R

    2015-04-01

    Wild populations increasingly experience extreme conditions as climate change amplifies environmental variability. How individuals respond to environmental extremes determines the impact of climate change overall. The variability of response from individual to individual can represent the opportunity for natural selection to occur as a result of extreme conditions. Here, we experimentally replicated the natural exposure to extreme temperatures of the reef lagoon at Ofu Island (American Samoa), where corals can experience severe heat stress during midday low tide. We investigated the bleaching and transcriptome response of 20 Acropora hyacinthus colonies 5 and 20 h after exposure to control (29 °C) or heated (35 °C) conditions. We found a highly dynamic transcriptome response: 27% of the coral transcriptome was significantly regulated 1 h postheat exposure. Yet 15 h later, when heat-induced coral bleaching became apparent, only 12% of the transcriptome was differentially regulated. A large proportion of responsive genes at the first time point returned to control levels, others remained differentially expressed over time, while an entirely different subset of genes was successively regulated at the second time point. However, a noteworthy variability in gene expression was observed among individual coral colonies. Among the genes of which expression lingered over time, fast return to normal levels was associated with low bleaching. Colonies that maintained higher expression levels of these genes bleached severely. Return to normal levels of gene expression after stress has been termed transcriptome resilience, and in the case of some specific genes may signal the physiological health and response ability of individuals to environmental stress.

  20. Influence of intermediary filling material on microleakage of intracoronally bleached and restored teeth

    Directory of Open Access Journals (Sweden)

    Maryam Khoroushi

    2009-01-01

    Full Text Available Background: Failure of composite restorations in terms of microleakage after intracoronal bleaching has been reported. The purpose of this study was to assess in vitro effect of sodium ascorbate and calcium hydroxide as intermediary filling materials to repair the microleakage associated with adhe-sive restoration following intracoronal bleaching. Methods: Sixty endodontically-treated incisors with access cavities extended to the cementoenamel junction in gingival margin were randomly divided into five equal groups. In group 1, cavities were restored by applying Single Bond and Z100 composite resin. In groups 2-5, 35% hydrogen peroxide gel was placed into the pulp chamber and sealed for 5 days. In group 2, teeth were then restored as in group 1. In groups 3 and 4, 10% sodium ascorbate gel and calcium hydroxide paste were applied in the pulp chamber for 40 hours, removed, rinsed and then, restored. In group 5, the cavities were incu-bated for 7 days and then, restored. Samples were thermocycled, immersed in basic fuschin, and sec-tioned. Dye penetration was scored using a stereomicroscope. Data were analyzed using Kruskal- Wallis and Mann-Whitney U tests (α = 0.05. Results: There was no significant difference in enamel margins (P = 0.163. In dentinal margins (P = 0.003, groups 1, 3 and 5 exhibited similar leakage patterns, each one of groups 1, 3 and 5 had sig-nificant differences with each one of groups 2 and 4. Conclusion: Intracoronal bleaching using 35% H2O2 gel increases the microleakage in dentinal margins. Application of the antioxidant agent or a seven-day delay following bleaching may improve the marginal integrity. Applying calcium hydroxide might jeopardize dentinal sealing.

  1. Peroxide bleaching agent effects on enamel surface microhardness, roughness and morphology

    OpenAIRE

    2004-01-01

    The aim of this study was to evaluate the surface roughness, microhardness and morphology of human enamel exposed to six bleaching agents (at baseline and post-treatment). Human dental enamel samples were obtained from human third molars and randomly divided into seven groups (n = 11): control, Whiteness Perfect - 10% carbamide peroxide (10% CP), Colgate Platinum - 10% CP, Day White 2Z - 7.5% hydrogen peroxide (7.5% HP), Whiteness Super - 37% CP, Opalescence Quick - 35% CP and Whiteness HP - ...

  2. The effect of two in-office and home bleaching gels on microhardness of composite resin

    Directory of Open Access Journals (Sweden)

    Alizadeh Oskoee P.

    2007-07-01

    Full Text Available Background and Aim: Bleaching products as chemical materials can exert side effects on soft and hard tissues and existing restorative materials with oxidizing mechanism. The aim of this study was to evaluate the effect of 15% and 35% carbamide peroxide gels as home and in-office bleaching agents respectively, on microhardness and surface topography of composite resin.Materials and Methods: In this in vitro study, a total of 75 disc shaped specimens were prepared from Z100  composite resin (3M and randomly divided into three groups with following treatment designs: group 1, 370C distilled water, group 2, 15% carbamide peroxide, 6 hours/day for 3 weeks, group 3, 35% carbamide peroxide 30 minutes/week for 3 weeks. The microhardness (Vickers hardness of samples was measured using Shimadzu set on three different points of each sample. 8 samples of each group were selected randomly to be assessed by scanning electron microscopy (SEM for probable changes in surface topography. Data were analyzed using one way ANOVA and Duncan tests with p<0.05 as the level of significance. Results: 15% carbamide peroxide group had the maximum amount of microhardness (84.59±1.87 and 35% carbamide peroxide group had the minimum (76. 14±1.77. Only the difference between home bleaching and control group was not statistically significant (P=0.24. The SEM assessing revealed no changes in surface topography.Conclusion: Based on the results of this study, in-office bleaching may decrease the microhardness of composite resin.

  3. Influence of Different Types and Concentrations of Chemical Catalysts on Dental Bleaching Efficiency.

    Science.gov (United States)

    Rocha Gomes Torres, Carlos; Guimarães, Carolina Anne; Ribeiro, Zulene Eveline Abreu; Borges, Alessandra Bühler

    2015-11-01

    The objective of this study was to evaluate the effects of different types and concentrations of chemical catalysts on the efficiency of 35% hydrogen peroxide gel on dental bleaching. Enamel-dentin disks were obtained from bovine incisors and the initial color was assessed. The groups were divided according to the type and concentration of catalyst added to an experimental gel: ferrous sulphate (FS) (0.001, 0.002 and 0.003%); ferrous gluconate (Fg) (0.01, 0.02 and 0.03%); ferric chloride (FC) (0.01, 0.02 and 0.03%); manganese gluconate (MG) (0.01, 0.02 and 0.03%); and manganese chloride (MC) (0.01, 0.02 and 0.03%). The positive control (PC) group received the bleaching gel without any catalyst, while in the negative control (NC) the specimens remained in artificial saliva. Three applications of the bleaching gels were performed for 10 minutes each, repeated after 7 days. Color assessments were performed 7 days after the first session and 7 days after the second. The specimens were stored in artificial saliva and assessed again after 1 year. The data were analyzed by parametric analysis of variance and Tukey's test. Some of the chemical catalysts tested were effective in reducing the yellowish color of the samples in relation to the positive control group after 1 and 2 applications and diminished the color relapse over time. After 1 year, the FS was the most effective catalyst tested. We concluded that some chemical catalysts increased the efficiency of dental bleaching.

  4. The application of catalase for the elimination of hydrogen peroxide residues after bleaching of cotton fabrics

    Directory of Open Access Journals (Sweden)

    AMORIM ALEXANDRA M.

    2002-01-01

    Full Text Available Results of dyeing of cotton fabrics with a bifunctional reactive dye were significantly improved when the fabric after bleaching with hydrogen peroxide was treated with catalase for the elimination of hydrogen peroxide residues from the fabrics. Compared to processes with a varying number of washing steps, with and without commercial reducing agents, the consumption of water could be significantly reduced, without altering the final color shade.

  5. Transcriptomic responses to heat stress and bleaching in the elkhorn coral Acropora palmata

    KAUST Repository

    DeSalvo, MK

    2010-03-08

    The emergence of genomic tools for reef-building corals and symbiotic anemones comes at a time when alarming losses in coral cover are being observed worldwide. These tools hold great promise in elucidating novel and unforeseen cellular processes underlying the successful mutualism between corals and their dinoflagellate endosymbionts Symbiodinium spp. Since thermal stress triggers a breakdown in the symbiosis (coral bleaching), measuring the transcriptomic response to thermal stress-induced bleaching offers an extraordinary view of cellular processes that are specific to coral–algal symbioses. In the present study, we utilized a cDNA microarray containing 2059 genes of the threatened Caribbean elkhorn coral Acropora palmata to identify genes that are differentially expressed upon thermal stress. Fragments from replicate colonies were exposed to elevated temperature for 2 d, and samples were frozen for microarray analysis after 24 and 48 h. Totals of 204 and 104 genes were differentially expressed in samples that were collected 1 and 2 d after thermal stress, respectively. Analysis of the differentially expressed genes indicates a cellular stress response in A. palmata involving (1) growth arrest, (2) chaperone activity, (3) nucleic acid stabilization and repair, and (4) removal of damaged macromolecules. Other differentially expressed processes include sensory perception, metabolite transfer between host and endosymbiont, nitric oxide signaling, and modifications to the actin cytoskeleton and extracellular matrix. The results are compared with those from a previous coral microarray study of thermal stress in Montastraea faveolata, and point to an overall evolutionary conserved bleaching response in scleractinian corals.

  6. Susceptibility of Enamel Treated with Bleaching Agents to Mineral Loss after Cariogenic Challenge

    Directory of Open Access Journals (Sweden)

    Hüseyin Tezel

    2011-01-01

    Full Text Available Objectives. Controversial reports exist whether bleaching agents cause a susceptibility to demineralization. The aim of this study was to compare the calcium loss of enamel treated with different bleaching agents and activation methods. Method and Materials. The specimens obtained from human premolars were treated in accordance with manufacturer protocols; 10% carbamide peroxide, 38% hydrogen peroxide light-activated, 38% hydrogen peroxide laser-activated, and no treatment (control. After cariogenic challenge calcium concentrations were determined by Inductively Coupled Plasma Mass Spectrometry. Results. No differences were found between the calcium loss of the laser-activated group and 10% carbamide peroxide group (>0.05. However, the differences between laser-activated and control groups were statistically significant (0.05. On the other hand, the light-activated group showed a significantly higher calcium loss compared with the other groups (<0.05. Conclusions. The results show that bleaching agents may cause calcium loss but it seems to be a negligible quantity for clinical aspects.

  7. Genotoxic potential of 10% and 16% Carbamide Peroxide in dental bleaching

    Directory of Open Access Journals (Sweden)

    Aline Ferreira de ALMEIDA

    2015-01-01

    Full Text Available Dental bleaching has become one of the most frequently requested esthetic treatments in dental offices. Despite the high clinical success observed with this procedure, some adverse effects have been reported, including a potential for developing premalignant lesions, root resorption and tooth sensitivity, especially when misused. The aim of this study was to evaluate the genotoxic response using a micronucleus (MN assay, after the application of two concentrations of carbamide peroxide. Thirty-seven patients were divided into two groups and randomly received either a 10% carbamide peroxide (CP (19 or a 16% carbamide peroxide (18 concentration for 21 days in individual dental trays. Gingival margin cells were collected immediately before the first use (baseline, and then 15 and 45 days after baseline. The cells were placed on a histological slide, stained by the Feulgen technique, and evaluated by an experienced blinded examiner. One thousand cells per slide were counted, and the MN rate was determined. The two groups were analyzed by the Wilcoxon rank-sum test and the Kruskal-Wallis equality-of-populations rank test. A slight increase in MN was observed for both groups, in comparison with the baseline, at 15 days. However, no difference was observed between the two groups (10% and 16%, at either 15 or 45 days (p = 0.90. When bleaching is not prolonged or not performed very frequently, bleaching agents containing carbamide peroxide alone will not cause mutagenic stress on gingival epithelial cells.

  8. A citizen science approach to monitoring bleaching in the zoantharian Palythoa tuberculosa

    KAUST Repository

    Parkinson, John Everett

    2016-03-28

    Coral reef bleaching events are expected to become more frequent and severe in the near future as climate changes. The zoantharian Palythoa tuberculosa bleaches earlier than many scleractinian corals and may serve as an indicator species. Basic monitoring of such species could help to detect and even anticipate bleaching events, especially in areas where more sophisticated approaches that rely on buoy or satellite measurements of sea surface temperature are unavailable or too coarse. One simple and inexpensive monitoring method involves training volunteers to record observations of host color as a proxy for symbiosis quality. Here, we trained university students to take the ‘color fingerprint’ of a reef by assessing the color of multiple randomly selected colonies of P. tuberculosa at one time point in Okinawa Island, Japan. We tested the reliability of the students’ color scores and whether they matched expectations based on previous monthly monitoring of tagged colonies at the same locations. We also measured three traditional metrics of symbiosis quality for comparison: symbiont morphological condition, cell density, and chlorophyll a content. We found that P. tuberculosa color score, although highly correlated among observers, provided little predictive power for the other variables. This was likely due to inherent variation in colony color among generally healthy zoantharians in midwinter, as well as low sample size and brief training owing to the course structure. Despite certain limitations of P. tuberculosa as a focal organism, the citizen science approach to color monitoring has promise, and we outline steps that could improve similar efforts in the future.

  9. Forecasting decadal changes in sea surface temperatures and coral bleaching within a Caribbean coral reef

    Science.gov (United States)

    Li, Angang; Reidenbach, Matthew A.

    2014-09-01

    Elevated sea surface temperature (SST) caused by global warming is one of the major threats to coral reefs. While increased SST has been shown to negatively affect the health of coral reefs by increasing rates of coral bleaching, how changes to atmospheric heating impact SST distributions, modified by local flow environments, has been less understood. This study aimed to simulate future water flow patterns and water surface heating in response to increased air temperature within a coral reef system in Bocas del Toro, Panama, located within the Caribbean Sea. Water flow and SST were modeled using the Delft3D-FLOWcomputer simulation package. Locally measured physical parameters, including bathymetry, astronomic tidal forcing, and coral habitat distribution were input into the model and water flow, and SST was simulated over a four-month period under present day, as well as projected warming scenarios in 2020s, 2050s, and 2080s. Changes in SST, and hence the thermal stress to corals, were quantified by degree heating weeks. Results showed that present-day reported bleaching sites were consistent with localized regions of continuous high SST. Regions with highest SST were located within shallow coastal sites adjacent to the mainland or within the interior of the bay, and characterized by low currents with high water retention times. Under projected increases in SSTs, shallow reef areas in low flow regions were found to be hot spots for future bleaching.

  10. Transient turbid water mass reduces temperature-induced coral bleaching and mortality in Barbados.

    Science.gov (United States)

    Oxenford, Hazel A; Vallès, Henri

    2016-01-01

    Global warming is seen as one of the greatest threats to the world's coral reefs and, with the continued rise in sea surface temperature predicted into the future, there is a great need for further understanding of how to prevent and address the damaging impacts. This is particularly so for countries whose economies depend heavily on healthy reefs, such as those of the eastern Caribbean. Here, we compare the severity of bleaching and mortality for five dominant coral species at six representative reef sites in Barbados during the two most significant warm-water events ever recorded in the eastern Caribbean, i.e., 2005 and 2010, and describe prevailing island-scale sea water conditions during both events. In so doing, we demonstrate that coral bleaching and subsequent mortality were considerably lower in 2010 than in 2005 for all species, irrespective of site, even though the anomalously warm water temperature profiles were very similar between years. We also show that during the 2010 event, Barbados was engulfed by a transient dark green turbid water mass of riverine origin coming from South America. We suggest that reduced exposure to high solar radiation associated with this transient water mass was the primary contributing factor to the lower bleaching and mortality observed in all corals. We conclude that monitoring these episodic mesoscale oceanographic features might improve risk assessments of southeastern Caribbean reefs to warm-water events in the future.

  11. Bleaching drives collapse in reef carbonate budgets and reef growth potential on southern Maldives reefs

    Science.gov (United States)

    Perry, C. T.; Morgan, K. M.

    2017-01-01

    Sea-surface temperature (SST) warming events, which are projected to increase in frequency and intensity with climate change, represent major threats to coral reefs. How these events impact reef carbonate budgets, and thus the capacity of reefs to sustain vertical growth under rising sea levels, remains poorly quantified. Here we quantify the magnitude of changes that followed the ENSO-induced SST warming that affected the Indian Ocean region in mid-2016. Resultant coral bleaching caused an average 75% reduction in coral cover (present mean 6.2%). Most critically we report major declines in shallow fore-reef carbonate budgets, these shifting from strongly net positive (mean 5.92 G, where G = kg CaCO3 m-2 yr-1) to strongly net negative (mean -2.96 G). These changes have driven major reductions in reef growth potential, which have declined from an average 4.2 to -0.4 mm yr-1. Thus these shallow fore-reef habitats are now in a phase of net erosion. Based on past bleaching recovery trajectories, and predicted increases in bleaching frequency, we predict a prolonged period of suppressed budget and reef growth states. This will limit reef capacity to track IPCC projections of sea-level rise, thus limiting the natural breakwater capacity of these reefs and threatening reef island stability.

  12. Long-term impacts of coral bleaching events on the world's warmest reefs.

    Science.gov (United States)

    Burt, John; Al-Harthi, Suaad; Al-Cibahy, Ashraf

    2011-10-01

    The southern Arabian Gulf houses some of the most thermally tolerant corals on earth, but severe bleaching in the late 1990s caused widespread mortality. More than a decade later, corals still dominated benthos (mean: 40 ± 3% cover on 10 sites spanning > 350 km; range: 11.0-65.6%), but coral communities varied spatially. Sites to the west generally had low species richness and coral cover (mean: 3.2 species per transect, 31% cover), with Porites dominated communities (88% of coral) that are distinct from more diverse and higher cover eastern sites (mean: 10.3 species per transect, 62% cover). These patterns reflect both the more extreme bleaching to the west in the late 1990s as well as the higher faviid dominated recruitment to the east in subsequent years. There has been limited recovery of the formerly dominant Acropora, which now represents bleaching can have substantial long-term impacts on coral communities, even in areas with corals tolerant to environmental extremes.

  13. Hurricanes and coral bleaching linked to changes in coral recruitment in Tobago.

    Science.gov (United States)

    Mallela, J; Crabbe, M J C

    2009-10-01

    Knowledge of coral recruitment patterns helps us understand how reefs react following major disturbances and provides us with an early warning system for predicting future reef health problems. We have reconstructed and interpreted historical and modern-day recruitment patterns, using a combination of growth modelling and in situ recruitment experiments, in order to understand how hurricanes, storms and bleaching events have influenced coral recruitment on the Caribbean coastline of Tobago. Whilst Tobago does not lie within the main hurricane belt results indicate that regional hurricane events negatively impact coral recruitment patterns in the Southern Caribbean. In years following hurricanes, tropical storms and bleaching events, coral recruitment was reduced when compared to normal years (p=0.016). Following Hurricane Ivan in 2004 and the 2005-2006 bleaching event, coral recruitment was markedly limited with only 2% (n=6) of colonies estimated to have recruited during 2006 and 2007. Our experimental results indicate that despite multiple large-scale disturbances corals are still recruiting on Tobago's marginal reef systems, albeit in low numbers.

  14. Warming Trends and Bleaching Stress of the World’s Coral Reefs 1985–2012

    Science.gov (United States)

    Heron, Scott F.; Maynard, Jeffrey A.; van Hooidonk, Ruben; Eakin, C. Mark

    2016-01-01

    Coral reefs across the world’s oceans are in the midst of the longest bleaching event on record (from 2014 to at least 2016). As many of the world’s reefs are remote, there is limited information on how past thermal conditions have influenced reef composition and current stress responses. Using satellite temperature data for 1985–2012, the analysis we present is the first to quantify, for global reef locations, spatial variations in warming trends, thermal stress events and temperature variability at reef-scale (~4 km). Among over 60,000 reef pixels globally, 97% show positive SST trends during the study period with 60% warming significantly. Annual trends exceeded summertime trends at most locations. This indicates that the period of summer-like temperatures has become longer through the record, with a corresponding shortening of the ‘winter’ reprieve from warm temperatures. The frequency of bleaching-level thermal stress increased three-fold between 1985–91 and 2006–12 – a trend climate model projections suggest will continue. The thermal history data products developed enable needed studies relating thermal history to bleaching resistance and community composition. Such analyses can help identify reefs more resilient to thermal stress. PMID:27922080

  15. Dimethylsulphoniopropionate (DMSP as an Indicator of Bleaching Tolerance in Scleractinian Corals

    Directory of Open Access Journals (Sweden)

    Graham B. Jones

    2015-06-01

    Full Text Available Thermal tolerance tests on Acropora millepora, a common Indo-Pacific hard coral, have shown that adult corals can acquire increased thermal tolerance by shuffling existing type C to type D Symbiodinium zooxanthellae when subjected to increased seawater temperatures. We report here dimethylsulphoniopropionate (DMSP concentrations in A. millepora and examine links between DMSP concentrations, zooxanthellae clade, and bleaching tolerance. DMSP analysis on native and transplanted corals from three locations in the Great Barrier Reef indicated that the lower thermal tolerance in type C zooxanthellae coincided with variable DMSP concentrations, whilst the more thermal tolerant type D zooxanthellae had more stable areal DMSP concentrations as seawater temperatures increased. Our results suggest this increased thermal tolerance in type D zooxanthellae may reflect the ability of these coral symbionts to conserve their antioxidant DMSP levels to relatively constant concentrations, enabling the coral to overcome the build-up of oxygen free radicals in the cytoplasm of A. millepora. A conceptual diagram illustrates how the antioxidants DMS (P participate in the bleaching process by scavenging oxygen free radicals and form DMSO, thus moderating coral bleaching and increasing thermotolerance.

  16. "Super-quenching" state protects Symbiodinium from thermal stress - Implications for coral bleaching.

    Science.gov (United States)

    Slavov, Chavdar; Schrameyer, Verena; Reus, Michael; Ralph, Peter J; Hill, Ross; Büchel, Claudia; Larkum, Anthony W D; Holzwarth, Alfred R

    2016-06-01

    The global rise in sea surface temperatures causes regular exposure of corals to high temperature and high light stress, leading to worldwide disastrous coral bleaching events (loss of symbiotic dinoflagellates (Symbiodinium) from reef-building corals). Our picosecond chlorophyll fluorescence experiments on cultured Symbiodinium clade C cells exposed to coral bleaching conditions uncovered the transformations of the alga's photosynthetic apparatus (PSA) that activate an extremely efficient non-photochemical "super-quenching" mechanism. The mechanism is associated with a transition from an initially heterogeneous photosystem II (PSII) pool to a homogeneous "spillover" pool, where nearly all excitation energy is transferred to photosystem I (PSI). There, the inherently higher stability of PSI and high quenching efficiency of P(700)(+) allow dumping of PSII excess excitation energy into heat, resulting in almost complete cessation of photosynthetic electron transport (PET). This potentially reversible "super-quenching" mechanism protects the PSA against destruction at the cost of a loss of photosynthetic activity. We suggest that the inhibition of PET and the consequent inhibition of organic carbon production (e.g. sugars) in the symbiotic Symbiodinium provide a trigger for the symbiont expulsion, i.e. bleaching.

  17. Transient turbid water mass reduces temperature-induced coral bleaching and mortality in Barbados

    Directory of Open Access Journals (Sweden)

    Hazel A. Oxenford

    2016-06-01

    Full Text Available Global warming is seen as one of the greatest threats to the world’s coral reefs and, with the continued rise in sea surface temperature predicted into the future, there is a great need for further understanding of how to prevent and address the damaging impacts. This is particularly so for countries whose economies depend heavily on healthy reefs, such as those of the eastern Caribbean. Here, we compare the severity of bleaching and mortality for five dominant coral species at six representative reef sites in Barbados during the two most significant warm-water events ever recorded in the eastern Caribbean, i.e., 2005 and 2010, and describe prevailing island-scale sea water conditions during both events. In so doing, we demonstrate that coral bleaching and subsequent mortality were considerably lower in 2010 than in 2005 for all species, irrespective of site, even though the anomalously warm water temperature profiles were very similar between years. We also show that during the 2010 event, Barbados was engulfed by a transient dark green turbid water mass of riverine origin coming from South America. We suggest that reduced exposure to high solar radiation associated with this transient water mass was the primary contributing factor to the lower bleaching and mortality observed in all corals. We conclude that monitoring these episodic mesoscale oceanographic features might improve risk assessments of southeastern Caribbean reefs to warm-water events in the future.

  18. [Bleaching of Baikalian Sponge Affects The Taxonomic Composition of Symbiotic Microorganisms].

    Science.gov (United States)

    Kaluzhnaya, O V; Itskovich, V B

    2015-11-01

    The diversity of 16S rRNA genes in the microbial community of endemic sponge Lubomirskia baicalensis with bleached patches of tissue was studied. Eight bacterial phyla were identified in the sponge microbiome: Cyanobacteria (27.3%; n = 36; 2 OTU, operational taxonomic unit), Proteobacteria (22.7%; n = 30; 5 OTU), Actinobacteria (16.7%; n = 22; 7 OTU, operation taxonomic unit), Verrucomicrobia (15.2%; n = 20; 4 OTU), Plactomycetes (9%; n = 12; 3 OTU), Bacteroidetes (4.5%; n = 6; 3 OTU), WS5 (3%; n = 4; 1 OTU), and TM7 (1.5%; n = 2; 1 OTU). The basic phyla typical of freshwater sponge microbiomes are present in the community. However, in contrast to previously studied L. baicalensis bacterial associations, a dominance of Cyanobacteria and a low number of representatives of the Bacteroidetes and Betaproteobacteria were observed in the bleached sponge community. Phylotypes exhibiting a high percentage of similarity with the microorganisms inhabiting substrates rich in organic matter were also found. Clearly, the bleaching processes of Baikal sponges affect the composition and the ratio of the major taxonomic groups of sponge-associated bacteria.

  19. Kinetics of AOX Formation in Chlorine Dioxide Bleaching of Bagasse Pulp

    Directory of Open Access Journals (Sweden)

    Shuangxi Nie

    2014-07-01

    Full Text Available In this paper, a kinetic model of the first chlorine dioxide bleaching stage (D0 in an elemental chlorine-free (ECF bleaching sequence is presented for bagasse pulps. The model is based on the rate of adsorbable organic halogen (AOX formation. The effects of the chlorine dioxide dosage, the sulfuric acid dosage, and the reaction temperature on the AOX content of wastewater are examined. The reaction of AOX formation could be divided into two periods. A large amount of AOX was formed rapidly within the first 10 min. Ten minutes later, the AOX formation rate significantly decreased. The kinetics could be expressed as: dW⁄dt=660.8•e^(-997.98/T 〖•[ClO〗_2 ]^0.877•[H2SO4 ]^0.355•W^(-1.065, where W is the AOX content, t is the bleaching time (min, T is the temperature (K, [ClO2] is the dosage of chlorine dioxide (kg/odt, and [H2SO4] is the dosage of sulfuric acid (kg/odt. The fit of the experiment results obtained for different temperatures, initial chlorine dioxide dosages, initial sulfuric acid dosages, and AOX content were very good, revealing the ability of the model to predict typical mill operating conditions.

  20. Analysis of the effect of wash water reduction on bleached pulp characteristics.

    Science.gov (United States)

    Frigieri, Tânia Cristina; Ventorim, Gustavo; Savi, Antônio Francisco; Favaro, Jaqueline Silveira Comelato

    2015-01-01

    The main objective of this study was to analyse cost reduction by reducing the use of fresh water in the cellulose bleaching process and to make it easier to obtain water in a closed circuit. Eucalyptus oxygen delignified industrial pulp was used. The pulp was bleached 10 times in the D(E+P)DP sequence in the same conditions. Counter current washing was used in the bleaching stages, and each sequence was carried out with different wash factors: 9, 6, 3, and 0 m³ of distilled water/ton of oven dry pulp. The goal was to reach brightness of 92±0.5% ISO. The results showed that there was a chemical oxygen demand (COD) increase and brightness reversion, but the kappa number and viscosity did not change. The apparent colour was increased by increasing COD in the effluent during the cycles and by decreasing the wash water. Up to 3 m³/t of water was tolerable and even recommended to wash pulp. Nine cubic metre per tonne of fresh water is most commonly used in the industry, so water savings make the implementation of the process possible.

  1. The walking bleach procedure: an in vitro study to measure microleakage of five temporary sealing agents.

    Science.gov (United States)

    Hosoya, N; Cox, C F; Arai, T; Nakamura, J

    2000-12-01

    The purpose of this study was to compare the in vitro sealing capacity of five materials, each used as a temporary sealing agent for the walking bleach technique. All teeth received traditional biomechanical root canal instrumentation, after which the walking bleach agent was placed in the pulp chamber space. The occlusal access was sealed with one of five temporary materials: two hydraulic filling materials, a photoactivated resin composite, a zinc oxide-eugenol cement, and a zinc oxide phosphate cement with/without the placement of a piece of rubber sheet that was placed as a barrier to isolate filling material from the bleaching agent. All teeth were stored in a 1% solution of Alcian blue with thermal cycling stress. After 1 wk, they were sectioned longitudinally, and ranked by graded scores of 0 to 3, according to the degree of the dye penetration. Significantly less dye microleakage was observed in the two hydraulic materials than in the photoactivated resin. Both zinc oxide-eugenol and zinc phosphate cements showed a considerable amount of microleakage. There were no significant differences between the groups with and without a rubber sheet. Our data demonstrate that hydraulic filling materials provide the most favorable cavosurface seal when they are firmly packed into the cavity space to prevent microleakage.

  2. Warming Trends and Bleaching Stress of the World’s Coral Reefs 1985–2012

    Science.gov (United States)

    Heron, Scott F.; Maynard, Jeffrey A.; van Hooidonk, Ruben; Eakin, C. Mark

    2016-12-01

    Coral reefs across the world’s oceans are in the midst of the longest bleaching event on record (from 2014 to at least 2016). As many of the world’s reefs are remote, there is limited information on how past thermal conditions have influenced reef composition and current stress responses. Using satellite temperature data for 1985–2012, the analysis we present is the first to quantify, for global reef locations, spatial variations in warming trends, thermal stress events and temperature variability at reef-scale (~4 km). Among over 60,000 reef pixels globally, 97% show positive SST trends during the study period with 60% warming significantly. Annual trends exceeded summertime trends at most locations. This indicates that the period of summer-like temperatures has become longer through the record, with a corresponding shortening of the ‘winter’ reprieve from warm temperatures. The frequency of bleaching-level thermal stress increased three-fold between 1985–91 and 2006–12 – a trend climate model projections suggest will continue. The thermal history data products developed enable needed studies relating thermal history to bleaching resistance and community composition. Such analyses can help identify reefs more resilient to thermal stress.

  3. Photo-bleaching effect in divalent samarium-doped alkaline-earth fluorohalides

    Energy Technology Data Exchange (ETDEWEB)

    Qin, Weiping [Chinese Academy of Sciences, Changchun (China); Jang, Kiwan; Cho, Hyungab; Chung, Yonghwa; Park, Seongtae; Lee, Yongill [Changwon National University, Changwon (Korea, Republic of); Kim, Changdae [Mokpo National University, Mokpo (Korea, Republic of)

    2004-08-15

    When a CW laser was focused on a sample of divalent samarium-doped alkaline-earth fluorohalides (Mg{sub 0.5}Sr{sub 0.5}FCl{sub 0.5}Br{sub 0.5} : Sm{sup 2+} or BaFCl{sub 0.5}Br{sub 0.5} : Sm{sup 2+}), the fluorescence intensity of Sm{sup +2} ions decreased rapidly. Under irradiation from a 488-nm laser with a power density of 10 W/cm{sup 2}, the intensity of the {sup 5}D{sub 0} -> {sup 7}F{sub 0} (Sm{sup 2+}) emission decreased as much as 96 % of its initial intensity in 30 minutes (for an X-ray-reduced sample). The so-called photo-bleaching effect can be influenced by the processes used for sample synthesis, such as the reduction method, the grinding process or X-ray irradiation. The decreasing curves obtained in the photo-bleaching experiments were fitted, a biexponential decreasing mode was found, which included a fast decrease (time constant {approx}tens of seconds) and a slow decrease (time constant {approx}hundreds of seconds). There was no evidence to support the divalent samarium ions being photo-ionized into trivalent samarium ions in the photobleaching process. The most probable mechanism for the photo-bleaching effect involves structural defects and color centers in the samples.

  4. Genotoxic potential of 10% and 16% carbamide peroxide in dental bleaching.

    Science.gov (United States)

    Almeida, Aline Ferreira de; Torre, Eliana do Nascimento; Selayaran, Maicon Dos Santos; Leite, Fábio Renato Manzolli; Demarco, Flávio Fernando; Loguercio, Alessandro Dourado; Etges, Adriana

    2015-01-01

    Dental bleaching has become one of the most frequently requested esthetic treatments in dental offices. Despite the high clinical success observed with this procedure, some adverse effects have been reported, including a potential for developing premalignant lesions, root resorption and tooth sensitivity, especially when misused. The aim of this study was to evaluate the genotoxic response using a micronucleus (MN) assay, after the application of two concentrations of carbamide peroxide. Thirty-seven patients were divided into two groups and randomly received either a 10% carbamide peroxide (CP) (19) or a 16% carbamide peroxide (18) concentration for 21 days in individual dental trays. Gingival margin cells were collected immediately before the first use (baseline), and then 15 and 45 days after baseline. The cells were placed on a histological slide, stained by the Feulgen technique, and evaluated by an experienced blinded examiner. One thousand cells per slide were counted, and the MN rate was determined. The two groups were analyzed by the Wilcoxon rank-sum test and the Kruskal-Wallis equality-of-populations rank test. A slight increase in MN was observed for both groups, in comparison with the baseline, at 15 days. However, no difference was observed between the two groups (10% and 16%), at either 15 or 45 days (p = 0.90). When bleaching is not prolonged or not performed very frequently, bleaching agents containing carbamide peroxide alone will not cause mutagenic stress on gingival epithelial cells.

  5. HE EFFECT OF TRANSITION METAL IONS-IRON ON HYDROGEN PEROXIDE BLEACHING

    Institute of Scientific and Technical Information of China (English)

    Yumeng Zhao; Shuhui Yang; Liang Sheng; Yonghao Ni

    2004-01-01

    Hydrogen peroxide bleaching has been extensively used in high-yield pulp bleaching. Unfortunately,hydrogen peroxide can be decomposed under alkaline condition, especially when transition metal ions exit. Experiments show that the valence of transition metal ion is also responsible for the decomposition of hydrogen peroxide.Iron ions are present in two oxidation states, Fe2+ and Fe3+. They are both catalytically active to hydrogen peroxide decomposition. Because Fe3+ is brown, it can affect the brightness of pulp directly, it can also combine with phenol, forming complexes which not only are stable structures and are difficult to be removed from pulp, but also significantly affect the brightness of pulp because of their color.Sodium silicate and magnesium sulfate, when used together, can greatly decrease hydrogen peroxide decomposition. The optimum dosage of sodium silicate is about 0.1% (on solution) for Fe2+ and 0.25% (on solution) for Fe3+. Adding chelants such as DTPA or EDTA with stabilizers simultaneously can obviously improve pulp brightness. For iron ions, the chelate effect of DTPA is better than that of EDTA.Under acidic conditions, sodium hyposulfite and cellulose can reduce Fe3+ to Fe2+ effectively, and pulp brightness is improved greatly. Adding sodium thiosulfate simultaneously with magnesium sulfate,sodium silicate, and DTPA to alkaline peroxide solution can result in higher brightness of pulp.pH is a key parameter during hydrogen peroxide bleaching, the optimum pH value should be 10.5-12.

  6. The effects of ultraviolet radiation on growth and bleaching in three species of Hawaiian coral

    Energy Technology Data Exchange (ETDEWEB)

    Goodman, G.D. (California State Univ., Long Beach (United States))

    1990-01-09

    Long term exposure to ultraviolet radiation is harmful to many organisms, including hermatypic corals, which obtain much of their nutrition from photosynthetic zooxanthellae. Therefore, increased UV radiation from atmospheric ozone depletion could inhibit growth of such corals. Moreover, coral bleaching, which has been attributed to loss of pigment and/or expulsion of zooxanthellae, may be a specific response to UV light. Does UV-A reduce skeletal growth or influence population density and pigment content of zooxanthellae In addition, do zooxanthellae migrate to shaded areas of the colony to avoid ultraviolet light Using alizarin red stain and suitable filters, I compared the stain and suitable filters, I compared the effects of UV-A (320-400nm) and full-spectrum UV (280-400nm) on the skeletal growth of two Hawaiian corals, Montipora verrucosa, Pocillopora damicornis, in situ. In the perforate corals, M. Verrucosa and Porites compressa, I measured concentration of zooxanthellae and their chlorophyll content to quantify bleaching in response to UV light. Reduction in skeletal growth by the two corals in response to different ranges of UV light appears to be species specific. Bleaching by UV appears to be characterized by an initial loss of pigment followed by the expulsion and migration of the zooxanthellae to shaded areas of the colony. Differences in tolerance and adaptation to decreasing ozone levels and increasing UV light should confer a competitive advantage on various species and morphologies of reef-building corals.

  7. Sonochemical and hydrodynamic cavitation reactors for laccase/hydrogen peroxide cotton bleaching.

    Science.gov (United States)

    Gonçalves, Idalina; Martins, Madalena; Loureiro, Ana; Gomes, Andreia; Cavaco-Paulo, Artur; Silva, Carla

    2014-03-01

    The main goal of this work is to develop a novel and environmental-friendly technology for cotton bleaching with reduced processing costs. This work exploits a combined laccase-hydrogen peroxide process assisted by ultrasound. For this purpose, specific reactors were studied, namely ultrasonic power generator type K8 (850 kHz) and ultrasonic bath equipment Ultrasonic cleaner USC600TH (45 kHz). The optimal operating conditions for bleaching were chosen considering the highest levels of hydroxyl radical production and the lowest energy input. The capacity to produce hydroxyl radicals by hydrodynamic cavitation was also assessed in two homogenizers, EmulsiFlex®-C3 and APV-2000. Laccase nanoemulsions were produced by high pressure homogenization using BSA (bovine serum albumin) as emulsifier. The bleaching efficiency of these formulations was tested and the results showed higher whiteness values when compared to free laccase. The combination of laccase-hydrogen peroxide process with ultrasound energy produced higher whiteness levels than those obtained by conventional methods. The amount of hydrogen peroxide was reduced 50% as well as the energy consumption in terms of temperature (reduction of 40 °C) and operating time (reduction of 90 min).

  8. Change in algal symbiont communities after bleaching, not prior heat exposure, increases heat tolerance of reef corals.

    Science.gov (United States)

    Silverstein, Rachel N; Cunning, Ross; Baker, Andrew C

    2015-01-01

    Mutualistic organisms can be particularly susceptible to climate change stress, as their survivorship is often limited by the most vulnerable partner. However, symbiotic plasticity can also help organisms in changing environments by expanding their realized niche space. Coral-algal (Symbiodinium spp.) symbiosis exemplifies this dichotomy: the partnership is highly susceptible to 'bleaching' (stress-induced symbiosis breakdown), but stress-tolerant symbionts can also sometimes mitigate bleaching. Here, we investigate the role of diverse and mutable symbiotic partnerships in increasing corals' ability to thrive in high temperature conditions. We conducted repeat bleaching and recovery experiments on the coral Montastraea cavernosa, and used quantitative PCR and chlorophyll fluorometry to assess the structure and function of Symbiodinium communities within coral hosts. During an initial heat exposure (32 °C for 10 days), corals hosting only stress-sensitive symbionts (Symbiodinium C3) bleached, but recovered (at either 24 °C or 29 °C) with predominantly (>90%) stress-tolerant symbionts (Symbiodinium D1a), which were not detected before bleaching (either due to absence or extreme low abundance). When a second heat stress (also 32 °C for 10 days) was applied 3 months later, corals that previously bleached and were now dominated by D1a Symbiodinium experienced less photodamage and symbiont loss compared to control corals that had not been previously bleached, and were therefore still dominated by Symbiodinium C3. Additional corals that were initially bleached without heat by a herbicide (DCMU, at 24 °C) also recovered predominantly with D1a symbionts, and similarly lost fewer symbionts during subsequent thermal stress. Increased thermotolerance was also not observed in C3-dominated corals that were acclimated for 3 months to warmer temperatures (29 °C) before heat stress. These findings indicate that increased thermotolerance post-bleaching resulted from

  9. The Effect of Fiber Bleaching Treatment on the Properties of Poly(lactic acid)/Oil Palm Empty Fruit Bunch Fiber Composites

    OpenAIRE

    Marwah Rayung; Nor Azowa Ibrahim; Norhazlin Zainuddin; Wan Zuhainis Saad; Nur Inani Abdul Razak; Buong Woei Chieng

    2014-01-01

    In this work, biodegradable composites from poly(lactic acid) (PLA) and oil palm empty fruit bunch (OPEFB) fiber were prepared by melt blending method. Prior to mixing, the fiber was modified through bleaching treatment using hydrogen peroxide. Bleached fiber composite showed an improvement in mechanical properties as compared to untreated fiber composite due to the enhanced fiber/matrix interfacial adhesion. Interestingly, fiber bleaching treatment also improved the physical appearance of th...

  10. In Situ Biodiesel Production from Residual Oil Recovered from Spent Bleaching Earth

    Directory of Open Access Journals (Sweden)

    Ramli Mat

    2011-05-01

    Full Text Available Currently, semi-refined and refined vegetable oils are used as a feedstock in biodiesel production. However, due to competition with conventional fossil fuel, economic reasons, shortage supply of food and its social impact on the global scale has somewhat slowed the development of biodiesel industry. Studies have been conducted to recover oil from mill palm oil operation especially from the spent bleaching earth. Hence, the study was to investigate the potential recovery of oil from spent bleaching earth to be used as a feedstock for biodiesel production. The effect of different types of catalysts (sodium hydroxide alkali and sulfuric acid catalysts on biodiesel yield was studied. In addition, the effect of volume addition of methanol to the weight of spent bleaching earth on the product yield was also studied. Furthermore, the effect of ratio of hexane to methanol was also carried out to determine its product yield. The studies were carried out in an in-situ biodiesel reactor system and the biodiesel product was analyzed using gas chromatography mass spectrometry. Result shows that the use of alkali catalyst produced the highest yield of biodiesel and the most optimum biodiesel yield was obtained when the methanol to spent bleaching earth ratio was 3.2:1 (gram of methanol: gram of SBE and hexane to methanol ratio of 0.6:1 (volume of hexane: volume of methanol. © 2011 BCREC UNDIP. All rights reserved(Received: 19th December 2010, Revised: 10th May 2011; Accepted: 18th May 2011[How to Cite: R. Mat, O.S. Ling, A. Johari, M. Mohamed. (2011. In Situ Biodiesel Production from Residual Oil Recovered from Spent Bleaching Earth. Bulletin of Chemical Reaction Engineering & Catalysis, 6(1: 53-57. doi:10.9767/bcrec.6.1.678.53-57][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.6.1.678.53-57 || or local:  http://ejournal.undip.ac.id/index.php/bcrec/article/view/678 ] | View in 

  11. Climate change and coral reef bleaching: An ecological assessment of long-term impacts, recovery trends and future outlook

    Science.gov (United States)

    Baker, Andrew C.; Glynn, Peter W.; Riegl, Bernhard

    2008-12-01

    Since the early 1980s, episodes of coral reef bleaching and mortality, due primarily to climate-induced ocean warming, have occurred almost annually in one or more of the world's tropical or subtropical seas. Bleaching is episodic, with the most severe events typically accompanying coupled ocean-atmosphere phenomena, such as the El Niño-Southern Oscillation (ENSO), which result in sustained regional elevations of ocean temperature. Using this extended dataset (25+ years), we review the short- and long-term ecological impacts of coral bleaching on reef ecosystems, and quantitatively synthesize recovery data worldwide. Bleaching episodes have resulted in catastrophic loss of coral cover in some locations, and have changed coral community structure in many others, with a potentially critical influence on the maintenance of biodiversity in the marine tropics. Bleaching has also set the stage for other declines in reef health, such as increases in coral diseases, the breakdown of reef framework by bioeroders, and the loss of critical habitat for associated reef fishes and other biota. Secondary ecological effects, such as the concentration of predators on remnant surviving coral populations, have also accelerated the pace of decline in some areas. Although bleaching severity and recovery have been variable across all spatial scales, some reefs have experienced relatively rapid recovery from severe bleaching impacts. There has been a significant overall recovery of coral cover in the Indian Ocean, where many reefs were devastated by a single large bleaching event in 1998. In contrast, coral cover on western Atlantic reefs has generally continued to decline in response to multiple smaller bleaching events and a diverse set of chronic secondary stressors. No clear trends are apparent in the eastern Pacific, the central-southern-western Pacific or the Arabian Gulf, where some reefs are recovering and others are not. The majority of survivors and new recruits on

  12. Perbedaan Penggunaan Bahan Desensitizing dan Tanpa Desensitizing Pasca Bleaching Ekstra-Koronal terhadap Kekerasan Email

    Directory of Open Access Journals (Sweden)

    Wignyo Hadriyanto

    2012-12-01

    Full Text Available Latar Belakang. Pada bleaching ekstrakoronal diketahui terjadi proses demineralisasi sehingga terjadi hiersensitivitas dentin. UltraEZ salah satu bahan desensitizing yang dapat mengurangi hipersensitivitas akibat demineralisasi email pasca bleaching ekstrakoronal terkini. Tujuan penelitian ini bertujuan untuk mengetahui perbedaan kekerasan email pasca pemutihan gigi ekstra-koronal dengan aplikasi bahan desensitizing dan tanpa aplikasi bahan desensitizing. Metode penelitian ini menggunakan 20 gigi premolar permanen pasca pencabutanyang masih utuh dan direndam dalam saliva buatan, kemudian dilakukan pemolesan pada bagian bukal dengan menggunakan pasta profilaksis kemudian gigi dicuci dan dikeringkan. Bahan pemutih Opalescence Xtra Boost diaplikasikan pada semua permukaan bukal gigi premolar kemudian dibagi menjadi 2 kelompok yaitu kelompok I, II, masing-masing kelompok sebanyak 10 gigi. Kelompok I sebagai kelompok control setelah dilakukan pemutihan, tidak dilakukan aplikasi Ultra-EZ, dimasukkan dalam wadah botol dan direndam dalam saliva buatan kemudian disimpan dalam incubator. Mahkota dan akar gigi,kemudian ditanam dalam resin akrilik sesuai kelompok sebelumnya dengan permukaan bukal menghadap ke atas. Semua sampel diuji kekerasannya dengan uji kekerasan Vickers menggunakan beban 100 g selama 15 detik. Permukaan bukal menghadap ke atas, kemudian dijepit dengan alat penjepit pada meja alat Micro Vickers Hardness Tester. Sampel diatur sedemikian rupa sehingga akan terlihat gambar yang dapat diukur panjang diagonalnya langsung dengan micrometer yang ada pada lensa okuler. Nilai kekerasan email dalam Vickers hardness number (VHN juga dapat diperoleh dari table setelah mengetahui rata-rata panjang diagonal, berat badan yang digunakan dan waktu yang digunakan untuk uji kekerasan. Pengujian ini dilakukan pada setiap kelompok. Selanjutnya diuji dengan uji-t. hasil penelitian menunjukkan ada perbedaan yang bermakna antara aplikasi ultraEZ lima menit

  13. Comparative toxicities of oxygen, ozone, chlorine dioxide, and chlorine bleaching filtrates - microtox toxicities of raw and processed filtrates

    Energy Technology Data Exchange (ETDEWEB)

    Ard, T.A.; McDonough, T.J.

    1995-12-31

    It has claimed that effluents from the bleaching of kraft pulp with chlorine and its compounds have deleterious effects on the aquatic environment. It has been further suggested that bleaching without the use of chlorine or its compounds will produce innocuous effluents. To obtain information on the validity of these claims, we have conducted a laboratory study of the toxicity of filtrates from chlorine-based and nonchlorine bleaching processes. We have also examined two related issues. The first is whether any toxicants generated during bleaching are rendered harmless (by neutralization, storage, and biological treatment) before being discharged to the environment. The second related issue is whether any toxicity observed in mill effluents actually originates in the bleaching process, as opposed to being due to raw material components or compounds formed during the pulping step that precedes bleaching. Several conclusions were drawn from this study. (1) There is a background level of toxicity which originates in the oxygen stage, process steps prior to bleaching, or in the wood raw material. It is decreased by neutralization and storage, but residual toxicity may still be detected after two weeks. (2) If the sum of the first and second stage toxicities is taken as an indicator of overall toxicity, the untreated filtrates may be ranked as follows: Control (Background) > D(EO) > Z(EO) > C(EO). However, these toxicities are of no importance in regard to environmental effects because of their ephemeral nature and the likelihood of their being reduced or eliminated prior to effluent discharge. Evidence for this statement is the ease with which all except the C(EO) were detoxified by neutralization and storage. (3) After neutralization and storage for two weeks at room temperature the ranking of toxicities becomes: C(EO) > D(EO) > Z(EO) > Background. The last three are similar in magnitude.

  14. In-Vitro Evaluation of the Effect of Herbal Antioxidants on Shear Bond Strength of Composite Resin to Bleached Enamel

    Directory of Open Access Journals (Sweden)

    Zahra Khamverdi

    2016-11-01

    Full Text Available Objectives: A reduction in bond strength of composite to bleached enamel has been reported immediately after bleaching treatment. Application of some antioxidant agents may decrease the adverse effects of whitening agents on bond strength and enhance composite bond to enamel. This study aimed to assess the effect of green tea, sodium ascorbate, sage and grape seed extract on bond strength of composite to bleached enamel.Materials and Methods: In this in-vitro study, 90 human enamel surfaces were randomly divided into six groups as follows (n=15: G1, no bleaching; G2, bleaching with 40% hydrogen peroxide (HP; G3, HP+1000 μmol epigallocatechin gallate (EGCG for 10 minutes; G4, HP+10% sodium ascorbate for 10 minutes; G5, HP+10% sage for 10 minutes and G6, HP+5% grape seed extract for 10 minutes. The specimens were bonded to composite in all groups. The shear bond strength of specimens was measured in Megapascals (MPa. Data were analyzed using one-way ANOVA and Tukey’s HSD test (α=0.05.Results: The highest and the lowest mean shear bond strength values were observed in group 1 (22.61±3.29MPa and group 2 (5.87±1.80MPa, respectively. The reduction in bond strength in group 2 was greater than that in other groups (P<0.001. No significant difference was found among groups 1, 3, 4, 5 and 6 (P>0.05. Conclusions: All the herbal antioxidants used in this study equally compensated for the reduced bond strength of composite to bleached enamel.Keywords: Antioxidants; Tooth Bleaching; Composite Resins; Shear Strength 

  15. Effect of postoperative peroxide bleaching on the marginal seal of composite restorations bonded with self-etch adhesives.

    Science.gov (United States)

    Roubickova, A; Dudek, M; Comba, L; Housova, D; Bradna, P

    2013-01-01

    The aim of this study was to determine the effect of peroxide bleaching on the marginal seal of composite restorations bonded with several adhesive systems. Combined cylindrical Class V cavities located half in enamel and half in dentin were prepared on the buccal and lingual surfaces of human molars. The cavities were bonded with the self-etch adhesives Clearfil SE-Bond (CLF), Adper Prompt (ADP), and iBond (IBO) and an etch-and-rinse adhesive Gluma Comfort Bond (GLU) and restored with a microhybrid composite Charisma. Experimental groups were treated 25 times for eight hours per day with a peroxide bleaching gel Opalescence PF 20, while the control groups were stored in distilled water for two months and then subjected to a microleakage test using a dye penetration method. Scanning electron microscopy was used to investigate the etching and penetration abilities of the adhesives and morphology of debonded restoration-enamel interfaces after the microleakage tests. Statistical analyses were performed using nonparametric Kruskal-Wallis, Mann-Whitney, and Wilcoxon tests at p=0.05. The microleakage of all GLU groups was low and not significantly affected by peroxide bleaching. Low microleakage was recorded for CLF control groups, but after bleaching, a small but significant increase in microleakage at the enamel margin indicated its sensitivity to peroxide bleaching. For ADP and IBO control groups, the microleakage at the enamel margins was significantly higher than for GLU and CLF and exceeded that at the dentin margins. Bleaching did not induce any significant changes in the microleakage. Electron microscopy analysis indicated that in our experimental setup, decreased adhesion and mechanical resistance of the ADP- and IBO-enamel interfaces could be more important than the chemical degradation effects induced by the peroxide bleaching gel.

  16. Coral disease following massive bleaching in 2005 causes 60% decline in coral cover on reefs in the US Virgin Islands

    Science.gov (United States)

    Miller, J.; Muller, E.; Rogers, C.; Waara, R.; Atkinson, A.; Whelan, K.R.T.; Patterson, M.; Witcher, B.

    2009-01-01

    In the northeast Caribbean, doldrum-like conditions combined with elevated water temperatures in the summer/fall 2005 created the most severe coral bleaching event ever documented within this region. Video monitoring of 100 randomly chosen, permanent transects at five study sites in the US Virgin Islands revealed over 90% of the scleractinian coral cover showed signs of thermal stress by paling or becoming completely white. Lower water temperatures in October allowed some re-coloring of corals; however, a subsequent unprecedented regional outbreak of coral disease affected all sites. Five known diseases or syndromes were recorded; however, most lesions showed signs similar to white plague. Nineteen scleractinian species were affected by disease, with >90% of the disease-induced lesions occurring on the genus Montastraea. The disease outbreak peaked several months after the onset of bleaching at all sites but did not occur at the same time. The mean number of disease-induced lesions increased 51-fold and the mean area of disease-associated mortality increased 13-fold when compared with pre-bleaching disease levels. In the 12 months following the onset of bleaching, coral cover declined at all sites (average loss: 51.5%, range: 42.4-61.8%) reducing the five-site average from 21.4% before bleaching to 10.3% with most mortality caused by white plague disease, not bleaching. Continued losses through October 2007 reduced the average coral cover of the five sites to 8.3% (average 2-year loss: 61.1%, range: 53.0-79.3%). Mean cover by M. annularis (complex) decreased 51%, Colpophyllia natans 78% and Agaricia agaricites 87%. Isolated disease outbreaks have been documented before in the Virgin Islands, but never as widespread or devastating as the one that occurred after the 2005 Caribbean coral-bleaching event. This study provides insight into the effects of continued seawater warming and subsequent coral bleaching events in the Caribbean and highlights the need to

  17. Differential coral bleaching-Contrasting the activity and response of enzymatic antioxidants in symbiotic partners under thermal stress.

    Science.gov (United States)

    Krueger, Thomas; Hawkins, Thomas D; Becker, Susanne; Pontasch, Stefanie; Dove, Sophie; Hoegh-Guldberg, Ove; Leggat, William; Fisher, Paul L; Davy, Simon K

    2015-12-01

    Mass coral bleaching due to thermal stress represents a major threat to the integrity and functioning of coral reefs. Thermal thresholds vary, however, between corals, partly as a result of the specific type of endosymbiotic dinoflagellate (Symbiodinium sp.) they harbour. The production of reactive oxygen species (ROS) in corals under thermal and light stress has been recognised as one mechanism that can lead to cellular damage and the loss of their symbiont population (Oxidative Theory of Coral Bleaching). Here, we compared the response of symbiont and host enzymatic antioxidants in the coral species Acropora millepora and Montipora digitata at 28°C and 33°C. A. millepora at 33°C showed a decrease in photochemical efficiency of photosystem II (PSII) and increase in maximum midday excitation pressure on PSII, with subsequent bleaching (declining photosynthetic pigment and symbiont density). M. digitata exhibited no bleaching response and photochemical changes in its symbionts were minor. The symbiont antioxidant enzymes superoxide dismutase, ascorbate peroxidase, and catalase peroxidase showed no significant upregulation to elevated temperatures in either coral, while only catalase was significantly elevated in both coral hosts at 33°C. Increased host catalase activity in the susceptible coral after 5days at 33°C was independent of antioxidant responses in the symbiont and preceded significant declines in PSII photochemical efficiencies. This finding suggests a potential decoupling of host redox mechanisms from symbiont photophysiology and raises questions about the importance of symbiont-derived ROS in initiating coral bleaching.

  18. Water quality and coral bleaching thresholds: formalising the linkage for the inshore reefs of the Great Barrier Reef, Australia.

    Science.gov (United States)

    Wooldridge, Scott A

    2009-05-01

    The threats of wide-scale coral bleaching and reef demise associated with anthropogenic climate change are widely known. Here, the additional role of poor water quality in lowering the thermal tolerance (i.e. bleaching 'resistance') of symbiotic reef corals is considered. In particular, a quantitative linkage is established between terrestrially-sourced dissolved inorganic nitrogen (DIN) loading and the upper thermal bleaching thresholds of inshore reefs on the Great Barrier Reef, Australia. Significantly, this biophysical linkage provides concrete evidence for the oft-expressed belief that improved coral reef management will increase the regional-scale survival prospects of corals reefs to global climate change. Indeed, for inshore reef areas with a high runoff exposure risk, it is shown that the potential benefit of this 'local' management imperative is equivalent to approximately 2.0-2.5 degrees C in relation to the upper thermal bleaching limit; though in this case, a potentially cost-prohibitive reduction in end-of-river DIN of >50-80% would be required. An integrated socio-economic modelling framework is outlined that will assist future efforts to understand (optimise) the alternate tradeoffs that the water quality/coral bleaching linkage presents.

  19. Model-based assessment of the role of human-induced climate change in the 2005 Caribbean coral bleaching event

    Energy Technology Data Exchange (ETDEWEB)

    Donner, S.D. [Princeton Univ., NJ (United States). Woodrow Wilson School of Public and International Affairs; Knutson, T.R. [National Oceanic and Atmospheric Administration, Princeton, NJ (United States). Geophysical Fluid Dynamics Lab.; Oppenheimer, M. [Princeton Univ., NJ (United States). Dept. of Geosciences

    2007-03-27

    Episodes of mass coral bleaching around the world in recent decades have been attributed to periods of anomalously warm ocean temperatures. In 2005, the sea surface temperature (SST) anomaly in the tropical North Atlantic that may have contributed to the strong hurricane season caused widespread coral bleaching in the Eastern Caribbean. Here, the authors use two global climate models to evaluate the contribution of natural climate variability and anthropogenic forcing to the thermal stress that caused the 2005 coral bleaching event. Historical temperature data and simulations for the 1870-2000 period show that the observed warming in the region is unlikely to be due to unforced climate variability alone. Simulation of background climate variability suggests that anthropogenic warming may have increased the probability of occurrence of significant thermal stress events for corals in this region by an order of magnitude. Under scenarios of future greenhouse gas emissions, mass coral bleaching in the Eastern Caribbean may become a biannual event in 20-30 years. However, if corals and their symbionts can adapt by 1-1.5{sup o}C, such mass bleaching events may not begin to recur at potentially harmful intervals until the latter half of the century. The delay could enable more time to alter the path of greenhouse gas emissions, although long-term 'committed warming' even after stabilization of atmospheric CO{sub 2} levels may still represent an additional long-term threat to corals.

  20. Model-based assessment of the role of human-induced climate change in the 2005 Caribbean coral bleaching event.

    Science.gov (United States)

    Donner, Simon D; Knutson, Thomas R; Oppenheimer, Michael

    2007-03-27

    Episodes of mass coral bleaching around the world in recent decades have been attributed to periods of anomalously warm ocean temperatures. In 2005, the sea surface temperature (SST) anomaly in the tropical North Atlantic that may have contributed to the strong hurricane season caused widespread coral bleaching in the Eastern Caribbean. Here, we use two global climate models to evaluate the contribution of natural climate variability and anthropogenic forcing to the thermal stress that caused the 2005 coral bleaching event. Historical temperature data and simulations for the 1870-2000 period show that the observed warming in the region is unlikely to be due to unforced climate variability alone. Simulation of background climate variability suggests that anthropogenic warming may have increased the probability of occurrence of significant thermal stress events for corals in this region by an order of magnitude. Under scenarios of future greenhouse gas emissions, mass coral bleaching in the Eastern Caribbean may become a biannual event in 20-30 years. However, if corals and their symbionts can adapt by 1-1.5 degrees C, such mass bleaching events may not begin to recur at potentially harmful intervals until the latter half of the century. The delay could enable more time to alter the path of greenhouse gas emissions, although long-term "committed warming" even after stabilization of atmospheric CO(2) levels may still represent an additional long-term threat to corals.

  1. The effect of three different mouthrinses on the surface hardness, gloss and colour change of bleached nano composite resins.

    Science.gov (United States)

    Gurgan, Sevil; Yalcin Cakir, Filiz

    2008-09-01

    This in vitro study evaluated the effects of three mouthrinses (Listerine--alcohol containing, Oral B--alcohol free and Rembrandt Plus--peroxide whitening rinse) on the surface hardness, gloss and colour of a nanofill (Filtek Supreme) and nanohybrid (Simile) composite resin that had been subjected to bleaching treatment. 30 specimens of each material were fabricated and randomly divided into three groups of 10. The hardness, gloss and CIE Lab colour parameters of each specimen were assessed prior to the experiments. Specimens were exposed to the 10% carbamide peroxide bleaching agent (Vivastyle) for 2 hours per day for 14 days. Following the bleaching treatment measurements were repeated. The specimens were then conditioned with mouthrinses for 12 hours which was equivalent in time to 1 year of two minutes daily use. The specimens were measured again for hardness, gloss and colour and data were subjected to the statistical analysis. The result of this study showed no statististical difference between the restorative materials after bleaching and the use of mouthrinses (p > 0.05). Bleaching treatment and the use of mouthrinses af fected the hardness, gloss and colour of both resins. Significant differences were observed with the use of mouthrinses for all parameters (p < 0.05). Rembrandt Plus promoted the greatest changes, followed by Listerine and Oral B.

  2. Downscaled projections of Caribbean coral bleaching that can inform conservation planning.

    Science.gov (United States)

    van Hooidonk, Ruben; Maynard, Jeffrey Allen; Liu, Yanyun; Lee, Sang-Ki

    2015-09-01

    Projections of climate change impacts on coral reefs produced at the coarse resolution (~1°) of Global Climate Models (GCMs) have informed debate but have not helped target local management actions. Here, projections of the onset of annual coral bleaching conditions in the Caribbean under Representative Concentration Pathway (RCP) 8.5 are produced using an ensemble of 33 Coupled Model Intercomparison Project phase-5 models and via dynamical and statistical downscaling. A high-resolution (~11 km) regional ocean model (MOM4.1) is used for the dynamical downscaling. For statistical downscaling, sea surface temperature (SST) means and annual cycles in all the GCMs are replaced with observed data from the ~4-km NOAA Pathfinder SST dataset. Spatial patterns in all three projections are broadly similar; the average year for the onset of annual severe bleaching is 2040-2043 for all projections. However, downscaled projections show many locations where the onset of annual severe bleaching (ASB) varies 10 or more years within a single GCM grid cell. Managers in locations where this applies (e.g., Florida, Turks and Caicos, Puerto Rico, and the Dominican Republic, among others) can identify locations that represent relative albeit temporary refugia. Both downscaled projections are different for the Bahamas compared to the GCM projections. The dynamically downscaled projections suggest an earlier onset of ASB linked to projected changes in regional currents, a feature not resolved in GCMs. This result demonstrates the value of dynamical downscaling for this application and means statistically downscaled projections have to be interpreted with caution. However, aside from west of Andros Island, the projections for the two types of downscaling are mostly aligned; projected onset of ASB is within ±10 years for 72% of the reef locations.

  3. Influence of bleaching technologies on the aerobic biodegradability of effluents from Eucalyptus kraft pulps factories

    Directory of Open Access Journals (Sweden)

    Gladys Vidal

    1999-01-01

    Full Text Available Aerobic biodegradability of effluents from different Eucalyptus kraft pulp bleaching processes was studied. Bleaching effluents were obtained from: i Chlorine Bleaching (CB processes, with partial substitution of chlorine by chlorine dioxide and ii Total Chlorine Free (TCF processes. The overall biodegradability, in terms of Chemical Oxygen Demand (COD was higher for TCF effluents (96-98% than for CB ones (82-93%. Taking into account the higher organic load of CB effluents, this fact implied a much higher residual COD for them (100-180 mg/L than for TCF effluents (10-30 mg/L. Furthermore, a refractory fraction of molecular weight higher than 43,000 Da was found in CB effluent, which implied the necessity of a further specific treatment. The toxicity was completely removed after the biological treatmentA biodegradabilidade aerobica das águas residuais provenientes de diferentes procesos de branqueos de pulpa kraft foi estudada. Os efluentes são gerados no branqueo com cloro ou parcialmente sustituido com dioxido de cloro (CB ou bem em processos livres do cloro (TCF. A biodegradabilidade, quantificada como DQO foi maior para as águas do processo CB. Tendo em conta o elevado conteúdo orgânico do efluente CB obteinse uma maior concentraç&ão do DQO final neste efluente comparado com o efluente TCF. Uma fracçao recalcitrante maior a 43,000 Da no effluente BC foi encontrada, isto significa um tratamento adicional específico para sua eliminaçã o. A toxicidade foi totalmente eliminada despois do tratamento aeração.

  4. Differential thermal bleaching susceptibilities amongst coral taxa: re-posing the role of the host

    Science.gov (United States)

    Wooldridge, Scott A.

    2014-03-01

    It is well established that different coral species have different susceptibilities to thermal stress, yet it is less clear which biological or physical mechanisms allow some corals to resist thermal stress, whereas other corals bleach and die. Although the type of symbiont is clearly of fundamental importance, many aspects of coral bleaching cannot be explained solely by differences in symbionts amongst coral species. Here, I use the CO2 (sink) limitation model of coral bleaching to repose various host traits believed to influence thermal tolerance (e.g. metabolic rates, colony tissue thickness, skeletal growth form, mucus production rates, tissue concentration of fluorescent pigments and heterotrophic feedings capacity) in terms of an integrated strategy to reduce the likelihood of CO2 limitation around its intracellular photosymbionts. Contrasting observational data for the skeletal vital effect on oxygen isotope composition (δ18O) partitions two alternate evolutionary strategies. The first strategy is heavily reliant on a sea water supply chain of CO2 to supplement respiratory CO2(met). In contrast, the alternate strategy is less reliant on the sea water supply source, potentially facilitated by increased basal respiration rates and/or a lower photosynthetic demand for CO2. The comparative vulnerability of these alternative strategies to modern ocean conditions is used to explain the global-wide observation that corals with branching morphologies (and thin tissue layers) are generally more thermally sensitive than corals with massive morphologies (and thick tissue layers). The life history implications of this new framework are discussed in terms of contrasting fitness drivers and past environmental constraints, which delivers ominous predictions for the viability of thin-tissued branching and plating species during the present human-dominated ("Anthropocene") era of the Earth System.

  5. Coral bleaching: one disturbance too many for near-shore reefs of the Great Barrier Reef

    Science.gov (United States)

    Thompson, A. A.; Dolman, A. M.

    2010-09-01

    The dynamic nature of coral communities can make it difficult to judge whether a reef system is resilient to the current disturbance regime. To address this question of resilience for near-shore coral communities of the Great Barrier Reef (Australia) a data set consisting of 350 annual observations of benthic community change was compiled from existing monitoring data. These data spanned the period 1985-2007 and were derived from coral reefs within 20 km of the coast. During years without major disturbance events, cover increase of the Acroporidae was much faster than it was for other coral families; a median of 11% per annum compared to medians of less than 4% for other coral families. Conversely, Acroporidae were more severely affected by cyclones and bleaching events than most other families. A simulation model parameterised with these observations indicated that while recovery rates of hard corals were sufficient to compensate for impacts associated with cyclones and crown-of-thorns starfish, the advent of mass bleaching has lead to a significant change in the composition of the community and a rapid decline in hard coral cover. Furthermore, if bleaching events continue to occur with the same frequency and severity as in the recent past, the model predicts that the cover of Acroporidae will continue to decline. Although significant cover of live coral remains on near-shore reefs, and recovery is observed during inter-disturbance periods, it appears that this system will not be resilient to the recent disturbance regime over the long term. Conservation strategies for coral reefs should focus on both mitigating local factors that act synergistically to increase the susceptibility of Acroporidae to climate change while promoting initiatives that maximise the recovery potential from inevitable disturbances.

  6. Bond strength of dentin submitted to bleaching and restored with different materials

    Directory of Open Access Journals (Sweden)

    Nelize Marcelino Pessarello

    2012-09-01

    Full Text Available Introduction: The use of adhesive composite resin with fluoride and with greater fluidity can be favorable to the restoration of the palatal/lingual face of teeth submitted to internal bleaching. Objective: This study evaluated the bond strength of adhesive systems and composite resins to bleached dentin. Material and methods: Forty maxillary canines were sectioned to obtain 40 blocks (5 x 5 mm of intracoronary dentin. The fragments were included and bleached with 37% carbamide peroxide. After 7 days, the specimens were divided into two groups according to the adhesive system: with (Optibond Solo Plus and without (Single Bond fluoride and subdivided into 2 subgroups (n = 10 according to the composite resin: microhybrid (Z250 and flowable (Z350. The restoration was carried out through a bipartite matrix. After 24 hours, the specimens were subjected to shear bond strength test. The data (MPa were analyzed by ANOVA and Tukey test (α = 0.05. Results: The best results (p < 0.05 were obtained for fluoridated adhesive (7.44 ± 2.35 compared with that without fluoride (5.36 ± 2.01; flowable resin (7.76 ± 2.23 performed better than microhybrid resin (5.03 ± 1.72. When the two variables were associated, the highest results were obtained for the specimens restored with fluoridated adhesive and flowable resin(9.04 ± 1.92. Lower results were observed for non-fluoridated adhesive + microhybrid resin – control (4.24 ± 1.59, without statistically

  7. Influence of bleaching agents on the microhardness of nanoparticle resin composite

    Directory of Open Access Journals (Sweden)

    Vanderlei Salvador Bagnato

    2009-01-01

    Full Text Available Objective: To assess the effect of bleaching agents on the microhardness of nanoparticle resin composite. Methods: Twenty-eight cylindrical test specimens (8x1mm of FiltekTM Supreme XT resin (3M/ESPE were prepared and divided into 5 groups. The initial Vickers microhardness was measured (load of 50 grams force for 30 seconds on the top surface of the test specimens. The groupswere treated and divided as follows: G1 – artificial saliva (21 days - control; G2 - 7% hydrogen peroxide gel applied for 4h/day, for 14 days; G3 - 10% carbamide peroxide for 4h/day, for 14 days: G4 – 35% hydrogen peroxide gel applied in three sessions of 30 minutes each, with an interval of one week (21 days between the sessions; G5 - 35% carbamide peroxide, three sessions of 30 minutes each, with an interval of one week (21 days between the sessions. The top surfaces of the test specimens received treatment and were submitted to the Vickers microhardness test. Results: The results obtained were submitted to the Analysis of Variance at a fixed criterion, at a level of significance of p=0.05. No significant differences were observed among the treatments tested (p=0.42 when compared with G1. Significant differences (Tukey test were found when the initial microhardness values were compared with the values after experimental treatments (p<0.01. Conclusion: The application of bleaching agents did not alter the microhardness of resin composites. Therefore, there is no need to change restorations after bleaching.

  8. Effect of electrolyte bleaching on the stability and performance of dye solar cells.

    Science.gov (United States)

    Mastroianni, Simone; Asghar, Imran; Miettunen, Kati; Halme, Janne; Lanuti, Alessandro; Brown, Thomas M; Lund, Peter

    2014-04-01

    Degradation of dye solar cells (DSCs) under severe ageing conditions may lead to loss of the tri-iodide in the electrolyte - a phenomenon known as electrolyte bleaching. Monitoring changes in the tri-iodide concentration as a result of degradation mechanisms and understanding their causes and effects are fundamental for improving the long-term stability of DSCs. In this contribution a strongly accelerated ageing test (1 Sun visible light, 1.5 Suns UV light, T = 110 °C for 12 h) was performed on DSCs in a double-sealed masterplate configuration to purposely induce severe electrolyte bleaching, and its effects on the performance and stability of DSCs with different initial tri-iodide concentrations [I3(-)]0 were investigated. The cells with low [I3(-)]0 suffered a severe loss in short circuit current density JSC (up to 85%). Also a significant loss of open circuit voltage VOC was observed and this loss was proportional to [I3(-)]0 with the highest VOC drop observed with the highest [I3(-)]0. Non-destructive analysis techniques based on the limited current density, JSCvs. light intensity, and photographic image analysis, were used to quantify the [I3(-)] loss, which was found to be ca. 50 mM and independent of [I3(-)]0. Quantitative model based VOC analysis in terms of changing [I3(-)] revealed that the degradation responsible for the VOC drop was dominated by an unknown mechanism that is unrelated to [I3(-)]0. The methods and results reported here help separating and identifying different degradation mechanisms related to electrolyte bleaching in DSCs.

  9. A citizen science approach to monitoring bleaching in the zoantharian Palythoa tuberculosa

    Directory of Open Access Journals (Sweden)

    John Everett Parkinson

    2016-03-01

    Full Text Available Coral reef bleaching events are expected to become more frequent and severe in the near future as climate changes. The zoantharian Palythoa tuberculosa bleaches earlier than many scleractinian corals and may serve as an indicator species. Basic monitoring of such species could help to detect and even anticipate bleaching events, especially in areas where more sophisticated approaches that rely on buoy or satellite measurements of sea surface temperature are unavailable or too coarse. One simple and inexpensive monitoring method involves training volunteers to record observations of host color as a proxy for symbiosis quality. Here, we trained university students to take the ‘color fingerprint’ of a reef by assessing the color of multiple randomly selected colonies of P. tuberculosa at one time point in Okinawa Island, Japan. We tested the reliability of the students’ color scores and whether they matched expectations based on previous monthly monitoring of tagged colonies at the same locations. We also measured three traditional metrics of symbiosis quality for comparison: symbiont morphological condition, cell density, and chlorophyll a content. We found that P. tuberculosa color score, although highly correlated among observers, provided little predictive power for the other variables. This was likely due to inherent variation in colony color among generally healthy zoantharians in midwinter, as well as low sample size and brief training owing to the course structure. Despite certain limitations of P. tuberculosa as a focal organism, the citizen science approach to color monitoring has promise, and we outline steps that could improve similar efforts in the future.

  10. Final chlorine dioxide stage at near-neutral pH for bleaching eucalypt pulp

    Directory of Open Access Journals (Sweden)

    Robisnéa A. Ribeiro

    2014-01-01

    Full Text Available It is well known that pH is an important parameter for controlling the eucalyptus pulp bleaching when using the final chlorine dioxide stage, since it affects the effectiveness of the process. Recommendations found in the literature for operating are in the 3.5 to 4.0 range. However, in this paper it was shown that final chlorine dioxide has better performance, with significant brightness gain while also preserving pulp quality, when it is operated at near neutral pH. This result can be explained by the generation of sodium bicarbonate in situ upon adding carbon dioxide at this stage.

  11. Bleaching of optical activity induced by UV Laser exposure in natural silica

    OpenAIRE

    Cannas, M.; Messina, F.

    2004-01-01

    We report experimental data on two types of natural silica, differing for their OH content, irradiated with UV photons (4.66 eV) from a pulsed Nd:YAG laser. Irradiation induces a reduction of the absorption band at 5.12eV and of the associated emissions at 3.14eV and 4.28eV, ascribed to twofold coordinated Ge (=Ge'') centers pre-existing in our samples. The bleaching is mainly due to the post-irradiation conversion of =Ge'' into the paramagnetic H(II) center via trapping of a H atom. Comparis...

  12. Gas Chromatography Analysis of Resin and Fatty Acids from Laboratory Generated Bleach Plant Effluents

    Institute of Scientific and Technical Information of China (English)

    Chhaya Sharma; S. Mohanty; S. Kumar; N.J. Rao

    2007-01-01

    Laboratory generated spent bleached liquor from the chlorination, caustic extraction stage of mixed wood kraft pulp processing has been analyzed both qualitatively and quantitatively for various resin & fatty acids by using GC. A number of resin acids,saturated and unsaturated fatty acids, chloro fatty and resin acid have been detected and their concentrations are estimated. The results are compared with results on different agriculture residue/hardwood pulps, which were reported earlier. The concentrations of various compounds detected have also been compared with their reported LC50 values.

  13. Transient turbid water mass reduces temperature-induced coral bleaching and mortality in Barbados

    OpenAIRE

    Hazel A Oxenford; Vallès, Henri

    2016-01-01

    Global warming is seen as one of the greatest threats to the world’s coral reefs and, with the continued rise in sea surface temperature predicted into the future, there is a great need for further understanding of how to prevent and address the damaging impacts. This is particularly so for countries whose economies depend heavily on healthy reefs, such as those of the eastern Caribbean. Here, we compare the severity of bleaching and mortality for five dominant coral species at six representa...

  14. Analysis of a radioactive lens and of the correlated UV light bleaching properties

    Energy Technology Data Exchange (ETDEWEB)

    Marzocchi, Olaf [European Patent Office, The Hague (Netherlands). Dept. of Applied Physics; Romanello, Vincenco [Karlsruher Institut fuer Technologie (KIT), Eggenstein-Leopoldshafen (Germany). Inst. fuer Nukleare Entsorgung (INE)

    2015-07-01

    Topic of the present work is the measurement of the activity of a reflex camera objective, known to include radioactive glass lenses, using a Geiger-Mueller counter and HPGe detectors. Using the calculated data, the dose to the eye lens during normal use is also estimated. Since thoriated lenses get a yellow tint with age, the effectiveness of UV light on the bleaching of the lens is is quantified. As last step, the thickest glas element has been cut and used to produce a long self-exposure on film.

  15. Removal of hexenuronic acid by xylanase to reduce adsorbable organic halides formation in chlorine dioxide bleaching of bagasse pulp.

    Science.gov (United States)

    Nie, Shuangxi; Wang, Shuangfei; Qin, Chengrong; Yao, Shuangquan; Ebonka, Johnbull Friday; Song, Xueping; Li, Kecheng

    2015-11-01

    Xylanase-aided chlorine dioxide bleaching of bagasse pulp was investigated. The pulp was pretreated with xylanase and followed a chlorine dioxide bleaching stage. The ATR-FTIR and XPS were employed to determine the surface chemistry of the control pulp, xylanase treated and chlorine dioxide treated pulps. The hexenuronic acid (HexA) could obviously be reduced after xylanase pretreatment, and the adsorbable organic halides (AOX) were reduced after chlorine dioxide bleaching. Compared to the control pulp, AOX could be reduced by 21.4-26.6% with xylanase treatment. Chlorine dioxide demand could be reduced by 12.5-22% to achieve the same brightness. The ATR-FTIR and XPS results showed that lignin and hemicellulose (mainly HexA) were the main source for AOX formation. Xylanase pretreatment could remove HexA and expose more lignin, which decreased the chlorine dioxide demand and thus reduced formation of AOX.

  16. Effects of 3% sodium ascorbyl phosphate on the hardness and bond strength of human enamel bleached with 10% carbamide peroxide.

    Science.gov (United States)

    da Silva, Ana Paula Brito; Lima, Adriano Fonseca; Cavalcanti, Andrea Nobrega; Marchi, Giselle Maria

    2010-01-01

    For this study, 120 fragments obtained from human third molars were randomly separated into 12 groups (n = 10). Four groups were used for measuring the Knoop hardness number (KHN) of enamel, while the other eight were used for testing the microtensile bond strength (muTBS) of two adhesive systems (Single Bond and Prime & Bond NT). All groups presented statistically similar KHN values. According to bond strength results, bleached enamel without antioxidant application demonstrated the lowest values of all groups. Based on these results, it could be concluded that the bleaching agents used in the present study (with or without sodium ascorbyl phosphate) did not affect human enamel hardness and that sodium ascorbyl phosphate is able to reverse the compromised bonding in bleached human enamel.

  17. Coral Diseases Following Massive Bleaching in 2005 Cause 60 Percent Decline in Coral Cover and Mortality of the Threatened Species, Acropora Palmata, on Reefs in the U.S. Virgin Islands

    Science.gov (United States)

    Rogers, Caroline S.

    2008-01-01

    Record-high seawater temperatures and calm seas in the summer of 2005 led to the most severe coral bleaching (greater than 90 percent bleached coral cover) ever observed in the U.S. Virgin Islands (USVI) (figs. 1 and 2). All but a few coral species bleached, including the threatened species, Acropora palmata. Bleaching was seen from the surface to depths over 20 meters.

  18. Modulation of light-enhancement to symbiotic algae by light-scattering in corals and evolutionary trends in bleaching.

    Directory of Open Access Journals (Sweden)

    Luisa A Marcelino

    Full Text Available Calcium carbonate skeletons of scleractinian corals amplify light availability to their algal symbionts by diffuse scattering, optimizing photosynthetic energy acquisition. However, the mechanism of scattering and its role in coral evolution and dissolution of algal symbioses during "bleaching" events are largely unknown. Here we show that differences in skeletal fractal architecture at nano/micro-lengthscales within 96 coral taxa result in an 8-fold variation in light-scattering and considerably alter the algal light environment. We identified a continuum of properties that fall between two extremes: (1 corals with low skeletal fractality that are efficient at transporting and redistributing light throughout the colony with low scatter but are at higher risk of bleaching and (2 corals with high skeletal fractality that are inefficient at transporting and redistributing light with high scatter and are at lower risk of bleaching. While levels of excess light derived from the coral skeleton is similar in both groups, the low-scatter corals have a higher rate of light-amplification increase when symbiont concentration is reduced during bleaching, thus creating a positive feedback-loop between symbiont concentration and light-amplification that exposes the remaining symbionts to increasingly higher light intensities. By placing our findings in an evolutionary framework, in conjunction with a novel empirical index of coral bleaching susceptibility, we find significant correlations between bleaching susceptibility and light-scattering despite rich homoplasy in both characters; suggesting that the cost of enhancing light-amplification to the algae is revealed in decreased resilience of the partnership to stress.

  19. Bleaching, disease and recovery in the threatened scleractinian coral Acropora palmata in St. John, US Virgin Islands: 2003-2010

    Science.gov (United States)

    Rogers, C. S.; Muller, E. M.

    2012-09-01

    A long-term study of the scleractinian coral Acropora palmata in the US Virgin Islands (USVI) showed that diseases, particularly white pox, are limiting the recovery of this threatened species. Colonies of A. palmata in Haulover Bay, within Virgin Islands National Park, St. John, were examined monthly in situ for signs of disease and other stressors from January 2003 through December 2009. During the study, 89.9 % of the colonies ( n = 69) exhibited disease, including white pox (87 %), white band (13 %), and unknown (9 %). Monthly disease prevalence ranged from 0 to 57 %, and disease was the most significant cause of complete colony mortality ( n = 17). A positive correlation was found between water temperature and disease prevalence, but not incidence. Annual average disease prevalence and incidence remained constant during the study. Colonies generally showed an increase in the estimated amount of total living tissue from growth, but 25 (36.2 %) of the colonies died. Acropora palmata bleached in the USVI for the first time during the 2005 Caribbean bleaching event. Only one of the 23 colonies that bleached appeared to die directly from bleaching. In 2005, corals that bleached had greater disease prevalence than those that did not bleach. Just over half (52 %) of the colonies incurred some physical damage. Monitoring of fragments (broken branches) that were generated by physical damage through June 2007 showed that 46.1 % died and 28.4 % remained alive; the fragments that attached to the substrate survived longer than those that did not. Recent surveys showed an increase in the total number of colonies within the reef area, formed from both asexual and sexual reproduction. Genotype analysis of 48 of the originally monitored corals indicated that 43 grew from sexual recruits supporting the conclusion that both asexual and sexual reproduction are contributing to an increase in colony density at this site.

  20. Bleaching, disease and recovery in the threatened scleractinian coral Acropora palmata in St. John, US Virgin Islands: 2003-2010

    Science.gov (United States)

    Rogers, C.S.; Muller, E.M.

    2012-01-01

    A long-term study of the scleractinian coral Acropora palmata in the US Virgin Islands (USVI) showed that diseases, particularly white pox, are limiting the recovery of this threatened species. Colonies of A. palmata in Haulover Bay, within Virgin Islands National Park, St. John, were examined monthly in situ for signs of disease and other stressors from January 2003 through December 2009. During the study, 89.9 % of the colonies (n = 69) exhibited disease, including white pox (87 %), white band (13 %), and unknown (9 %). Monthly disease prevalence ranged from 0 to 57 %, and disease was the most significant cause of complete colony mortality (n = 17). A positive correlation was found between water temperature and disease prevalence, but not incidence. Annual average disease prevalence and incidence remained constant during the study. Colonies generally showed an increase in the estimated amount of total living tissue from growth, but 25 (36.2 %) of the colonies died. Acropora palmata bleached in the USVI for the first time during the 2005 Caribbean bleaching event. Only one of the 23 colonies that bleached appeared to die directly from bleaching. In 2005, corals that bleached had greater disease prevalence than those that did not bleach. Just over half (52 %) of the colonies incurred some physical damage. Monitoring of fragments (broken branches) that were generated by physical damage through June 2007 showed that 46.1 % died and 28.4 % remained alive; the fragments that attached to the substrate survived longer than those that did not. Recent surveys showed an increase in the total number of colonies within the reef area, formed from both asexual and sexual reproduction. Genotype analysis of 48 of the originally monitored corals indicated that 43 grew from sexual recruits supporting the conclusion that both asexual and sexual reproduction are contributing to an increase in colony density at this site.

  1. Coronal microleakage with five different temporary restorative materials following walking bleach technique: An ex-vivo study

    Directory of Open Access Journals (Sweden)

    G. P. V Srikumar

    2012-01-01

    Full Text Available Context: Walking bleach technique uses 30% hydrogen peroxide and sodium perborate, and this paste mixture causes loosening of the coronal temporary restorative materials and thus decreasing its clinical effectiveness and causing irritation to the patients oral tissues. In the present study, sealing ability of hygroscopic coronal temporary restorative materials were compared with the other commonly used temporary restorative materials. Aim: To evaluate the effects of walking bleach material on the marginal sealing ability and coronal microleakage of the hydrophilic temporary restorative materials with that of the other commonly used temporary restorative materials in endodontic practice. Materials and Methods: Seventy-five extracted human maxillary central incisor teeth were prepared chemo-mechanically and obturated with gutta-percha in lateral condensation technique. Surface of each tooth was double coated with cyanoacrylate glue. All the teeth were randomly divided in to five groups. Out of 15 teeth in each group, 10 teeth served as experimental specimens, in which bleaching agent was placed in the pulp chamber and 5 teeth served as control, in which no bleaching agent was placed. The access cavities were restored with temporary restorative materials being tested per each group respectively. The specimens were then immersed in 1% India ink dye and subjected to thermo cycling for 7 days. All the teeth were longitudinally sectioned and observed with stereomicroscope and were graded according to the depth of linear dye penetration. Statistical Analysis Used: Mann-Whitney U test and Kruskal-Wallis test. Results: Hydrophilic temporary restorative materials Cavit G and Coltosol F have shown minimal coronal dye leakage with better sealing ability when exposed to walking bleach paste mixture in the dye penetration tests compared to other commonly used temporary restorative materials. Conclusion: Marginal sealing ability of Cavit G and Coltosol F were